Surface quality varies with headrig chipping

Treesearch

G. Woodson; S.M. Rigby

1978-01-01

Good surface quality can be achieved on both cants and lumber produced on chipping headrigs and on edgers, but meticulous maintenance of feedworks, setworks, knife sharpness, alignment, and security in the cutterhead is required. Straight logs with small knots yield cants with smoother surfaces than crooked, butt-flared, or knotty logs. Surface quality is also...

Effective Use of Discovery Learning to Improve Understanding of Factors That Affect Quality

ERIC Educational Resources Information Center

Mukherjee, Arup

2015-01-01

Undergraduate business majors are required to take a course in operations management. In this course, a great deal of emphasis is put on developing a good understanding of quality because this is likely to be the only required course that covers this important topic. Quality of output exhibits a great deal of variation. To produce high quality on…

Arizonans Like Their Jobs but Question Their Schools. AZ Views, Volume 1, Issue 2, October 2008

ERIC Educational Resources Information Center

Morrison Institute for Public Policy, Arizona State University, 2008

2008-01-01

Good jobs and good schools are viewed by most as essential components of a healthy society: good jobs create revenue to support quality schools, which in turn produce a superior workforce to fill those jobs. Based on survey panelist responses, most Arizonans seem to feel that they are doing well on the employment front, but not quite so well…

Reputation and Competition in a Hidden Action Model

PubMed Central

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium. PMID:25329387

Reputation and competition in a hidden action model.

PubMed

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium.

Sol–gel preparation of well-adhered films and long range ordered inverse opal films of BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Arjan, Wafa S.; King Faisal University, PO Box 380, Al Hofuf; Algaradah, Mohammed M.F.

Highlights: • Highly adaptable sols are presented for processing of the electroceramic materials BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}. • High quality thin films are produced by dip coating with good phase control. • Infiltration of cross-linked polystyrene templates led to high quality inverse opals. - Abstract: Barium and bismuth titanate thin films and well-ordered inverse opal films are produced by dip coating from sols containing titanium alkoxides with acetic acid, acetylacetone, methoxyethanol and water. The inverse opal preparations used crosslinked polystyrene opal templates. Heat treatment in air produced tetragonal BaTiO{sub 3} or mixtures of the hexagonal and tetragonalmore » phases, or phase pure Bi{sub 2}Ti{sub 2}O{sub 7}. Good quality films were obtained with a thickness of 5 μm from a single dipping, and the thickness could be increased by dipping multiple times. Inverse opals were well ordered and exhibited opalescence and photonic stop band effects.« less

The discrimination of fish egg quality and viability by using Raman spectroscopy

NASA Astrophysics Data System (ADS)

Ishigaki, Mika; Sato, Hidetoshi

2014-03-01

Sexual reproductive body can be produced from a fertilized ovum. Once the ovum is fertilized with sperm, it runs through the cell division, differentiates to all kinds of cells, and goes to make a complete body. However, not all of them are viable and some of them stop to ontogenesis showing the developmental abnormality. In order to discriminate the egg quality, we apply Raman spectroscopy for fish egg. After the measurement, these Raman data are checked up with the information about the eggs can survive or not, and we examine what factors are important in egg components to distinguish between "good quality" and "not good quality". We present the results of assessment of egg quality, and investigate whether Raman spectroscopy can be used to a discriminate of egg quality.

Influence of manufacturing practices on quality of pharmaceutical products manufactured in Kenya.

PubMed

Orwa, J A; Keter, L K; Ouko, S P A; Kibwage, I O; Rukunga, G M

2004-06-01

To establish the quality of pharmaceutical products manufactured by the respective industries in Kenya and determine the effect of manufacturing practices on the quality of these products. Cross-sectional study. Industries examined are in Nairobi, Kenya. Laboratory analysis was carried out using available facilities at Kenya Medical Research Institute and University of Nairobi, Faculty of Pharmacy. Structured Questionnaires were administered to examine how the code of good manufacturing practices has been used in the production of each pharmaceutical product by respective companies. Questionnaires designed to evaluate the distribution and carry out limited post-market surveillance study were administered to community pharmacy outlets. Drugs were sampled and analyzed for their quality according to the respective monographs. The questionnaires administered to the industry included the source of raw materials, quarantine procedure before and after manufacture, manufacturing procedure, quality audit, quality assurance procedure, equipment, and staff. That administered to the pharmacy outlet included availability, affordability and acceptability of locally manufactured pharmaceutical products. Quality analysis of products involved the establishment of the chemical content, dissolution profile, friability, uniformity of weight and identity. For antibiotic suspensions the stability after reconstitution was also determined. There were 15 respondents and two non-respondents from the industry and six out of nine respondents from the pharmacy outlets. The ratio of qualified staff to product range produced seemed to influence product quality. Industries producing several products with only limited number of pharmaceutical staff had more products failing to comply with pharmacopoeia specifications compared to those producing only few products. Nevertheless, all companies are well equipped with quality control equipment, in accordance with type of product manufactured. Private pharmacies stocked few of the locally manufactured products. The reason, they said, was due to low doctor and/or patient acceptance. Compliance with quality specifications as set out in respective monographs was overall 76%. Although the local pharmaceutical industries have adopted good manufacturing practices leading to many good quality products currently in commerce, these manufacturing practices are not comprehensive and measures need to be taken to continue improving them.

Beware of False Promises

ERIC Educational Resources Information Center

Bush, Edward C.; Bush, Lawson, V

2004-01-01

The "good fruit, bad fruit" parable provides a metaphor for sound accountability. If one wants to assess the source of problems to determine quality, then one must look at what has been produced. Unfortunately, many researchers and practitioners have examined the fruit without determining the quality of the tree. This failure has allowed…

Identification of optimal mask size parameter for noise filtering in 99mTc-methylene diphosphonate bone scintigraphy images.

PubMed

Pandey, Anil K; Bisht, Chandan S; Sharma, Param D; ArunRaj, Sreedharan Thankarajan; Taywade, Sameer; Patel, Chetan; Bal, Chandrashekhar; Kumar, Rakesh

2017-11-01

Tc-methylene diphosphonate (Tc-MDP) bone scintigraphy images have limited number of counts per pixel. A noise filtering method based on local statistics of the image produces better results than a linear filter. However, the mask size has a significant effect on image quality. In this study, we have identified the optimal mask size that yields a good smooth bone scan image. Forty four bone scan images were processed using mask sizes 3, 5, 7, 9, 11, 13, and 15 pixels. The input and processed images were reviewed in two steps. In the first step, the images were inspected and the mask sizes that produced images with significant loss of clinical details in comparison with the input image were excluded. In the second step, the image quality of the 40 sets of images (each set had input image, and its corresponding three processed images with 3, 5, and 7-pixel masks) was assessed by two nuclear medicine physicians. They selected one good smooth image from each set of images. The image quality was also assessed quantitatively with a line profile. Fisher's exact test was used to find statistically significant differences in image quality processed with 5 and 7-pixel mask at a 5% cut-off. A statistically significant difference was found between the image quality processed with 5 and 7-pixel mask at P=0.00528. The identified optimal mask size to produce a good smooth image was found to be 7 pixels. The best mask size for the John-Sen Lee filter was found to be 7×7 pixels, which yielded Tc-methylene diphosphonate bone scan images with the highest acceptable smoothness.

Evaluating the Good Ontology Design Guideline (GoodOD) with the Ontology Quality Requirements and Evaluation Method and Metrics (OQuaRE)

PubMed Central

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

Objective To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. Background In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. Methods In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Results Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. Conclusion The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies. PMID:25148262

Evaluating the Good Ontology Design Guideline (GoodOD) with the ontology quality requirements and evaluation method and metrics (OQuaRE).

PubMed

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies.

A variable rate speech compressor for mobile applications

NASA Technical Reports Server (NTRS)

Yeldener, S.; Kondoz, A. M.; Evans, B. G.

1990-01-01

One of the most promising speech coder at the bit rate of 9.6 to 4.8 kbits/s is CELP. Code Excited Linear Prediction (CELP) has been dominating 9.6 to 4.8 kbits/s region during the past 3 to 4 years. Its set back however, is its expensive implementation. As an alternative to CELP, the Base-Band CELP (CELP-BB) was developed which produced good quality speech comparable to CELP and a single chip implementable complexity as reported previously. Its robustness was also improved to tolerate errors up to 1.0 pct. and maintain intelligibility up to 5.0 pct. and more. Although, CELP-BB produces good quality speech at around 4.8 kbits/s, it has a fundamental problem when updating the pitch filter memory. A sub-optimal solution is proposed for this problem. Below 4.8 kbits/s, however, CELP-BB suffers from noticeable quantization noise as a result of the large vector dimensions used. Efficient representation of speech below 4.8 kbits/s is reported by introducing Sinusoidal Transform Coding (STC) to represent the LPC excitation which is called Sine Wave Excited LPC (SWELP). In this case, natural sounding good quality synthetic speech is obtained at around 2.4 kbits/s.

Next step in manufacturing

NASA Astrophysics Data System (ADS)

Koenig, Jan D.

2018-04-01

Thermoelectric devices convert heat flows into electricity. Researchers recently demonstrated that thermoelectric materials can be produced in good quality by 3D printing, enabling a low-cost production process in the near future.

Measuring Quality of the ANSF

DTIC Science & Technology

2011-03-01

own efforts to remain good stewards of these resources. Manpower further constrains our actions and ability to produce quality and will only become...literate will directly benefit operational effectiveness (e.g., orders and directives) and steward - ship of personnel and equipment (e.g., supply...Unfortunately, many don’t realize this statement of fact and do not account for it in their calculus when assessing the quality of the ANSF. Our

British Thoracic Society Quality Standards for acute non-invasive ventilation in adults

PubMed Central

Davies, Michael; Allen, Martin; Bentley, Andrew; Bourke, Stephen C; Creagh-Brown, Ben; D’Oliveiro, Rachel; Glossop, Alastair; Gray, Alasdair; Jacobs, Phillip; Mahadeva, Ravi; Moses, Rachael; Setchfield, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the provision of acute non-invasive ventilation in adults together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 6 quality statements have been developed, each describing a standard of care for the provision of acute non-invasive ventilation in the UK, together with measurable markers of good practice. Conclusion BTS Quality Standards for acute non-invasive ventilation in adults form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline’s recommendations. PMID:29636979

Making Movies: The Next Big Thing in Feedback?

ERIC Educational Resources Information Center

Hope, Sheila A.

2011-01-01

Good quality, timely feedback is a key factor to help students achieve their full potential. Increased class sizes have put significant strain on the ability to return work promptly without compromising feedback quality. In the current study, two screencasting technologies were used to produce audiovisual feedback. For essays, Jing was used,…

Developing a Mobile Extension Course for Youth Livestock Producers

ERIC Educational Resources Information Center

Weitzenkamp, Deborah; Dam, Karna; Chichester, Lindsay

2015-01-01

The 4-H Livestock Quality Assurance course is a mobile Extension course for youth and youth leaders. In 3 years of implementation, over 6,600 participants from 16 states have learned about good production practices for animal agriculture through the innovative online Nebraska Livestock Quality Assurance course. By evaluating the needs of our youth…

Targeting Ovarian Cancer with Porphysome Nanotechnology

DTIC Science & Technology

2015-10-01

human administration; these specifications include requirements/restrictions on the volume, pH , appearance, sterility, bacterial endotoxins ...the translational success of nanomedicines is the ability to produce agents in accordance with quality control systems such as current Good...sufficiently robust and reliable for producing the same product time after time with the intended physicochemical characteristics, biological behaviors, and

Is a Partner's Competence Threatening during Dyadic Cooperative Work? It Depends on Resource Interdependence

ERIC Educational Resources Information Center

Buchs, Celine; Butera, Fabrizio

2009-01-01

Previous studies with university students have shown that resource interdependence during cooperative dyadic work on texts produces two different dynamics in student interaction and learning. Working on complementary information produces positive interactions, but a good quality of information transmission is needed to foster student learning.…

Producing Foils From Direct Cast Titanium Alloy Strip

NASA Technical Reports Server (NTRS)

Stuart, T. A.; Gaspar, T. A.; Sukonnik, I. M.; Semiatan, S. L.; Batawi, E.; Peters, J. A.; Fraser, H. L.

1996-01-01

This research was undertaken to demonstrate the feasibility of producing high-quality, thin-gage, titanium foil from direct cast titanium strip. Melt Overflow Rapid Solidification Technology (MORST) was used to cast several different titanium alloys into 500 microns thick strip, 10 cm wide and up to 3 m long. The strip was then either ground, hot pack rolled or cold rolled, as appropriate, into foil. Gamma titanium aluminide (TiAl) was cast and ground to approximately 100 microns thick foil and alpha-2 titanium aluminide (Ti3AI) was cast and hot pack rolled to approximately 70 microns thick foil. CP Ti, Ti6Al2Sn4Zr2Mo, and Ti22AI23Nb (Orthorhombic), were successfully cast and cold-rolled into good quality foil (less than 125 microns thick). The foils were generally fully dense with smooth surfaces, had fine, uniform microstructures, and demonstrated mechanical properties equivalent to conventionally produced titanium. By eliminating many manufacturing steps, this technology has the potential to produce thin gage, titanium foil with good engineering properties at significantly reduced cost relative to conventional ingot metallurgy processing.

Integrating Microscopic Analysis into Existing Quality Assurance Processes

NASA Astrophysics Data System (ADS)

Frühberger, Peter; Stephan, Thomas; Beyerer, Jürgen

When technical goods, like mainboards and other electronic components, are produced, quality assurance (QA) is very important. To achieve this goal, different optical microscopes can be used to analyze a variety of specimen to gain comprehensive information by combining the acquired sensor data. In many industrial processes, cameras are used to examine these technical goods. Those cameras can analyze complete boards at once and offer a high level of accuracy when used for completeness checks. When small defects, e.g. soldered points, need to be examined in detail, those wide area cameras are limited. Microscopes with large magnification need to be used to analyze those critical areas. But microscopes alone cannot fulfill this task within a limited time schedule, because microscopic analysis of complete motherboards of a certain size is time demanding. Microscopes are limited concerning their depth of field and depth of focus, which is why additional components like XY moving tables need to be used to examine the complete surface. Yet today's industrial production quality standards require a 100 % control of the soldered components within a given time schedule. This level of quality, while keeping inspection time low, can only be achieved when combining multiple inspection devices in an optimized manner. This paper presents results and methods of combining industrial cameras with microscopy instrumenting a classificatory based approach intending to keep already deployed QA processes in place but extending them with the purpose of increasing the quality level of the produced technical goods while maintaining high throughput.

Electroplating and stripping copper on molybdenum and niobium

NASA Technical Reports Server (NTRS)

Power, J. L.

1978-01-01

Molybdenum and niobium are often electroplated and subsequently stripped of copper. Since general standard plating techniques produce poor quality coatings, general procedures have been optimized and specified to give good results.

[Quality of shortenings available on the home market].

PubMed

Zbikowska, Anna; Rutkowska, Jarosława; Krygier, Krzysztof

2006-01-01

The aim of this work was to examine the quality of shortenings available on Polish market, produced home or imported. The quality of twelve 100% vegetable fats and lard was estimated. Both chemical (fatty acids composition, especially trans isomers content, acid value, peroxide value, anisidine value, Totox, iodine value and oxidative stability--Rancimat test) and physical (melting point, solid fat content--at temperatures from 5 to 50 degrees C) properties were measured. The fats were subject to sensoric examination. The parameters defining the freshness of examined fats and their shelf life for all examined samples were good and proved the good quality. Induction time (150 degrees C) for examined fats varied from 1,79 to 4,29h. Examined fats differed significantly in saturated fatty acids content (from 14,0 do 60,2%) and trans isomers (from 0,1 to 56,6%). Fats produced from palm oil are also present and there are fats with smaller trans fat acids content. Examined shortenings contained very small content of essential fatty acids (from 0,5 to 10,4), and they showed very different melting points (from 19,6 to 42,1 degrees C) and solid phase contents. In general the examined fats were of good sensoric value. Summing up the received results, it should be underlined that large disparity in the content of trans isomers in analysed samples was observed and definitely TFA content should be lowered.

Hackneyed, Acned, or Just Plain Good: Perceiving Quality in Young Adult Fiction.

ERIC Educational Resources Information Center

Agee, Hugh

A rating scale was developed by Stephen Dunning for evaluating adolescent literature objectively. The distinguishing features of the scale's five categories are designed to produce a numerical score between 5 and 25 (each category a 1-to-5 ranking for poor/excellent quality), indicating the relative worth of a specific literary work. The first…

[Quality improvement in workers health surveillance: the spirometry training courses experience].

PubMed

Innocenti, A; Quercia, A; Roscelli, F

2012-01-01

The spirometry execution during workers health surveillance requires accurate and reproducible spirometric measurements, which should comply with the ATS/ERS guidelines. Low acceptability of spirometric manoeuvres has been reported in health surveillance. This may hamper the validity of the results and affect clinical decision making. Training and refresher courses may produce and maintain good-quality testing, promote the use of spirometric results in clinical practice and enhance the quality of interpretation. We evaluated (with PLATINO score) 239 spirometries from 23 occupational physicians recorded before and after a spirometry refresher course (16 hours) and we verified that only 4 physicians showed a very good improvement and others 4 a good improvement of score, while 9 showed a very slight improvement and 6 instead no improvement. It is worthy of note that in 2012 some spirometers not suitable to UNI EN 26782/2009 were still in use.

Magnetic field measurements of a clinical MR imager at 1.5 tesla

NASA Astrophysics Data System (ADS)

Muhech, A.; Tellez, I.; Esteva, M.; Marrufo, O.; Jimenez, L.; Vazquez, F.; Taboada, J.; Rodriguez, A. O.

2012-10-01

In the clinical environment is mandatory to run periodically measurements of uniformity of the magnetic field produced by the magnet to assure good image quality. The phase difference method was used to measure the magnetic field uniformity of the 1.5 T scanner of the Instituto Nacional de Neurologia y Neurocirugia MVS. The uniformity field values showed that the imager performance is reasonably good for clinical imaging. Some concern was raised since results may not be good enough for magnetic resonance spectroscopy runs.

Effects of resource quality on the population dynamics of the Indian meal moth Plodia interpunctella and its granulovirus.

PubMed

McVean, Ross I; Sait, Steve M; Thompson, David J; Begon, Mike

2002-03-01

Although the Plodia interpunctella-granulovirus system is one of the most studied models for insect-pathogen interactions, there are relatively few precise data on the dynamics of the virus in coexisting populations of these two organisms. Previous work has suggested that resource quality, in terms of the diet supplied to P. interpunctella, has a strong effect on the population dynamics of host and pathogen. Here we investigate the impact of resource-dependent host patterns of abundance on pathogen dynamics and prevalence. In the laboratory, three populations of P. interpunctella feeding on a good quality food and infected with a granulovirus were compared with three populations also infected with a granulovirus but feeding on poor quality food. Populations feeding on good quality food produced larger adult moths, and had greater numbers of adult moths, healthy larvae, and virus-infected larvae. A higher proportion of larvae in these good quality populations were infected with virus, and adult moths exhibited cyclic fluctuations in abundance, unlike those on poor quality food. This cyclic behaviour was shown to be associated with cycles in the age structure of the larval population. Previous theoretical work suggests that these cycles may result from asymmetric competition between young and old larvae. Cyclic fluctuations in the proportion of infected larvae, that occurred on good, but not on poor quality food, were also shown to be related to cycles in the age structure of the larval population.

High-Quality Reduced Graphene Oxide by a Dual-Function Chemical Reduction and Healing Process

PubMed Central

Some, Surajit; Kim, Youngmin; Yoon, Yeoheung; Yoo, HeeJoun; Lee, Saemi; Park, Younghun; Lee, Hyoyoung

2013-01-01

A new chemical dual-functional reducing agent, thiophene, was used to produce high-quality reduced graphene oxide (rGO) as a result of a chemical reduction of graphene oxide (GO) and the healing of rGO. Thiophene reduced GO by donation of electrons with acceptance of oxygen while it was converted into an intermediate oxidised polymerised thiophene that was eventually transformed into polyhydrocarbon by loss of sulphur atoms. Surprisingly, the polyhydrocarbon template helped to produce good-quality rGOC (chemically reduced) and high-quality rGOCT after thermal treatment. The resulting rGOCT nanosheets did not contain any nitrogen or sulphur impurities, were highly deoxygenated and showed a healing effect. Thus the electrical properties of the as-prepared rGOCT were superior to those of conventional hydrazine-produced rGO that require harsh reaction conditions. Our novel dual reduction and healing method with thiophene could potentially save energy and facilitate the commercial mass production of high-quality graphene. PMID:23722643

Community Public Health Fact Sheet

EPA Pesticide Factsheets

EPA’s Community Public Health (CPH) project in the Office of Research and Development (ORD) produces high quality science and tools to understand and assess environmental risks and ecosystem goods and services (EGS) to decision-makers at all levels.

The Relevance of Abraham Maslow's Work to Health Education

ERIC Educational Resources Information Center

Nolte, Ann

1976-01-01

Health educators should be aware of people as growth aspiring, with a basic nature of goodness, and that individuals need to experience those qualities within themselves which produce health and a zest for living. (JD)

A Pilot Intervention to Improve the Structural Quality of Exam Essay Writing in UK Undergraduate Psychology Students

ERIC Educational Resources Information Center

Connelly, Vincent; Dockrell, Julie E.; Barnett, Jo

2006-01-01

Psychology undergraduates need to produce good quality essays in order to succeed at university. Students find the transition to university writing difficult. Using a rubric, a profile of student weakness in psychology essay writing was described. The students were generally poor at the structural organisation of their essays. A pilot intervention…

Recovery of Item Parameters in the Nominal Response Model: A Comparison of Marginal Maximum Likelihood Estimation and Markov Chain Monte Carlo Estimation.

ERIC Educational Resources Information Center

Wollack, James A.; Bolt, Daniel M.; Cohen, Allan S.; Lee, Young-Sun

2002-01-01

Compared the quality of item parameter estimates for marginal maximum likelihood (MML) and Markov Chain Monte Carlo (MCMC) with the nominal response model using simulation. The quality of item parameter recovery was nearly identical for MML and MCMC, and both methods tended to produce good estimates. (SLD)

Beyond the wild nut: moving toward profitable black walnut nut crops

Treesearch

Brian Hammons; Felix, Jr. Ponder; John Rickman

2004-01-01

Currently, about 2 million pounds of black walnut nutmeats are consumed annually, requiring about 26 million pounds of wild in-shell nuts (hulled, wet weight). Walnuts from wild trees are variable in quality, yield, and moisture, reducing the amount of good, salable nutmeats produced. Consequently, the price that can be paid to the harvester/producer is limited....

Proteomic Analysis of Host Cell Protein Dynamics in the Culture Supernatants of Antibody-Producing CHO Cells

PubMed Central

Park, Jin Hyoung; Jin, Jong Hwa; Lim, Myung Sin; An, Hyun Joo; Kim, Jong Won; Lee, Gyun Min

2017-01-01

Chinese hamster ovary (CHO) cells are the most common cell line used for the production of therapeutic proteins including monoclonal antibodies (mAbs). Host cell proteins (HCPs), secreted and released from lysed cells, accumulate extracellularly during the cultures of recombinant CHO (rCHO) cells, potentially impairing product quality. In an effort to maintain good mAb quality during the cultures, HCPs accumulated extracellularly in batch and fed-batch cultures of a mAb-producing rCHO cell line were identified and quantified by nanoflow liquid chromatography-tandem mass spectrometry, followed by their gene ontology and functional analysis. Due to higher cell concentration and longer culture duration, more HCPs were identified and quantitated in fed-batch culture (2145 proteins identified and 1673 proteins quantified) than in batch culture (1934 proteins identified and 1486 proteins quantified). Clustering analysis of HCPs showed that the concentration profiles of HCPs affecting mAb quality (Lgmn, Ctsd, Gbl1, and B4galt1) correlated with changes in mAb quality attributes such as aggregation, charge variants, and N-glycosylation during the cultures. Taken together, the dataset of HCPs obtained in this study provides insights into determining the appropriate target proteins to be removed during both the cultures and purification steps for ensuring good mAb quality. PMID:28281648

Technology and Participation in Japanese Factories: The Consequences for Morale and Productivity.

ERIC Educational Resources Information Center

Hull, Frank; Azumi, Koya

1988-01-01

By fully using their human resources, Japanese factories mass produce goods of low cost and high quality. Participation in Japanese factories occurs in a more hierarchical framework than advocated in the Western model of worker democracy. (JOW)

[Herbal textual research on relationship between Chinese medicine"Shihu" (Dendrobium spp.) and "Tiepi Shihu" (D. catenatum)].

PubMed

Si, Jin-Ping; Zhang, Yuan; Luo, Yi-Bo; Liu, Jing-Jing; Liu, Zhong-Jian

2017-05-01

Dendrobium species on the ancient Chinese herbal texts were investigated in this paper, including their dscriptions of original species, producing areas and quality. Our results indicated that the major producing areas were Lu'an, Anhui province and Wenzhou, Taizhou, Zhejiang province. In addition, the sweet flavor, short, thin and solid stems were standing for good quality. Based on the stable producing areas and quality descriptions, D. catenatum (D. officinale) ("Tiepi Shihu") and D. houshanense were high quality medicinal Dendrobium species ("Shihu" ) in ancient China. Besides, there were 3 scientific names for "Tiepi Shihu", including D. candidum, D. officinale, D. catenatum. After textual investigation, We suggest that D. catenatum should be its scientific name, and D. officinale was synonyms published later. However, the name "D. officinale" could be reserved as it is much more popular used in publication and commodities. Moreover, its Chinese name should be "Tiepi Shihu". Copyright© by the Chinese Pharmaceutical Association.

Multi Objective Optimization of Yarn Quality and Fibre Quality Using Evolutionary Algorithm

NASA Astrophysics Data System (ADS)

Ghosh, Anindya; Das, Subhasis; Banerjee, Debamalya

2013-03-01

The quality and cost of resulting yarn play a significant role to determine its end application. The challenging task of any spinner lies in producing a good quality yarn with added cost benefit. The present work does a multi-objective optimization on two objectives, viz. maximization of cotton yarn strength and minimization of raw material quality. The first objective function has been formulated based on the artificial neural network input-output relation between cotton fibre properties and yarn strength. The second objective function is formulated with the well known regression equation of spinning consistency index. It is obvious that these two objectives are conflicting in nature i.e. not a single combination of cotton fibre parameters does exist which produce maximum yarn strength and minimum cotton fibre quality simultaneously. Therefore, it has several optimal solutions from which a trade-off is needed depending upon the requirement of user. In this work, the optimal solutions are obtained with an elitist multi-objective evolutionary algorithm based on Non-dominated Sorting Genetic Algorithm II (NSGA-II). These optimum solutions may lead to the efficient exploitation of raw materials to produce better quality yarns at low costs.

Strengthening radiopharmacy practice in IAEA Member States.

PubMed

Duatti, Adriano; Bhonsle, Uday

2013-05-01

Radiopharmaceuticals are essential components of nuclear medicine procedures. Without radiopharmaceuticals nuclear medicine procedures cannot be performed. Therefore it could be said that 'No radiopharmaceutical-no nuclear medicine.' A good radiopharmacy practice supports nuclear medicine activities by producing radiopharmaceuticals that are safe and are of the required quality in a consistent way. As with any medicinal product, radiopharmaceuticals are required to be produced under carefully controlled conditions and are tested for their quality, prior to the administration to patients, using validated standard operating procedures. These procedures are based on the principles of Good Manufacturing Practice (GMP). The GMP principles are based on scientific knowledge and applicable regulatory requirements and guidance related to radiopharmaceutical productions and use. The International Atomic Energy Agency (IAEA) is committed to promote, in the Member States (MS), a rational and practical approach for the implementation of GMP for compounding or manufacturing of diagnostic or therapeutic radiopharmaceuticals. To pursue this goal the IAEA has developed various mechanisms and collaborations with individual experts in the field and with relevant national and international institutions or organizations. IAEA's activities in promoting radiopharmaceutical science include commissioning expert advice in the form of publications on radiopharmaceutical production, quality control and usage, producing technical guidance on production and regulatory aspects related to new radiopharmaceuticals, creating guidance documentation for self or internal audits of radiopharmaceutical production facilities, producing guidance on implementation of Quality Management System and GMP in radiopharmacy, assisting in creation of specific radiopharmaceutical monographs for the International Pharmacopoeia, and developing radiopharmacy-related human resource capabilities in MS through individual and regional training courses and education programs. IAEA strongly supports development of clinical nuclear medicine services by assisting MS in setting up reliable Radiopharmaceutical production facilities for single photon emission computed tomography, positron emission tomography, and for therapeutic applications. Copyright © 2013 Elsevier Inc. All rights reserved.

Potential sources of microbial contamination in unpasteurized apple cider.

PubMed

Garcia, Luis; Henderson, John; Fabri, Martha; Oke, Moustapha

2006-01-01

A study was conducted to identify possible sources of microbial contamination and to assess the effect of good cleaning and sanitation practices on the microbial quality and safety of unpasteurized apple cider. Raw unwashed apples, washed apples, cleaning water, fresh cider, and finished cider samples were collected from five Ontario producers over 4 months and microbiologically tested. Total coliforms were found in 31, 71 and 38% of the unwashed apple, water, and washed apple samples, respectively. Escherichia coli was found in 40% of the water samples from one producer alone. The washing step was identified as a potential source of contamination, possibly due to water in the dump tanks seldom being refreshed, and because scrubbers, spray nozzles, and conveyors were not properly cleaned and sanitized. Higher total coliform counts (P < 0.0001) and prevalence (P < 0.0001) in fresh cider compared with those in unwashed apples and washed apples indicated considerable microbial buildup along the process, possibly explained by the lack of appropriate equipment sanitation procedures. Results showed that producers who had better sanitary practices in place had lower (P < 0.001) total coliform prevalence than the rest of the producers. Overall results show that good sanitation procedures are associated with improved microbial quality of fresh cider in terms of total coliforms and that operators who pasteurize and/or UV treat their product should still be required to have a sound good manufacturing practices program in place to prevent recontamination. Cryptosporidium parvum, an important pathogen for this industry, was found in different sample types, including washed apples, water, and fresh and finished cider.

Do quality improvement systems improve health library services? A systematic review.

PubMed

Gray, Hannah; Sutton, Gary; Treadway, Victoria

2012-09-01

A turbulent financial and political climate requires health libraries to be more accountable than ever. Quality improvement systems are widely considered a 'good thing to do', but do they produce useful outcomes that can demonstrate value? To undertake a systematic review to identify which aspects of health libraries are being measured for quality, what tools are being used and what outcomes are reported following utilisation of quality improvement systems. Many health libraries utilise quality improvement systems without translating the data into service improvements. Included studies demonstrate that quality improvement systems produce valuable outcomes including a positive impact on strategic planning, promotion, new and improved services and staff development. No impact of quality improvement systems on library users or patients is reported in the literature. The literature in this area is sparse and requires updating. We recommend further primary research is conducted in health libraries focusing upon the outcomes of utilising quality improvement systems. An exploration of quality improvement systems in other library sectors may also provide valuable insight for health libraries. © 2012 The authors. Health Information and Libraries Journal © 2012 Health Libraries Group.

Hot water, fresh beer, and salt

NASA Astrophysics Data System (ADS)

Crawford, Frank S.

1990-11-01

In the ``hot chocolate effect'' the best musical scales (those with the finest tone quality, largest range, and best tempo) are obtained by adding salt to a glass of hot water supersaturated with air. Good scales can also be obtained by adding salt to a glass of freshly opened beer (supersaturated with CO2) provided you first (a) get rid of much of the excess CO2 so as to produce smaller, hence slower, rising bubbles, and (b) get rid of the head of foam, which damps the standing wave and ruins the tone quality. Finally the old question, ``Do ionizing particles produce bubbles in fresh beer?'' is answered experimentally.

Development, characterization and qualification of first GEM foils produced in India

NASA Astrophysics Data System (ADS)

Shah, Aashaq; Ahmed, Asar; Gola, Mohit; Sharma, Ram Krishna; Malhotra, Shivali; Kumar, Ashok; Naimuddin, Md.; Menon, Pradeep; Srinivasan, K.

2018-06-01

The increasing demand for Gas Electron Multiplier (GEM) foils has been driven by their application in many current and proposed high-energy physics experiments. Micropack, a Bengaluru-based company, has established and commercialized GEM foils for the first time in India. Micropack used the double-mask etching technique to successfully produce 10 cm × 10 cm GEM foil. In this paper, we report on the development as well as the geometrical and electrical properties of these foils, including the size uniformity of the holes and leakage current measurements. Our characterization studies show that the foils are of good quality and satisfy all the necessary quality control criteria.

Lighting for Education.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

Some of the qualities and quantities that must be juggled to produce good lighting for educational facilities are analyzed with photographs, tables, and drawings. The three categories of lamps used for school lighting (incandescent, fluorescent, and high intensity discharge) are described; a lamp selection guide gives the design characteristics of…

Results from a first production of enhanced Silicon Sensor Test Structures produced by ITE Warsaw

NASA Astrophysics Data System (ADS)

Bergauer, T.; Dragicevic, M.; Frey, M.; Grabiec, P.; Grodner, M.; Hänsel, S.; Hartmann, F.; Hoffmann, K.-H.; Hrubec, J.; Krammer, M.; Kucharski, K.; Macchiolo, A.; Marczewski, J.

2009-01-01

Monitoring the manufacturing process of silicon sensors is essential to ensure stable quality of the produced detectors. During the CMS silicon sensor production we were utilising small Test Structures (TS) incorporated on the cut-away of the wafers to measure certain process-relevant parameters. Experience from the CMS production and quality assurance led to enhancements of these TS. Another important application of TS is the commissioning of new vendors. The measurements provide us with a good understanding of the capabilities of a vendor's process. A first batch of the new TS was produced at the Institute of Electron Technology in Warsaw Poland. We will first review the improvements to the original CMS test structures and then discuss a selection of important measurements performed on this first batch.

Contract Management Process Maturity: Empirical Analysis of Organizational Assessments

DTIC Science & Technology

2009-08-27

maturity or learning capability ( Yueng , Ulrich, Nason, & Von Glinow, 1999), thus enabling them to produce high-quality goods and services faster, cheaper...from http://www.transcom.mil/organization2.cfm Yueng , A.K., Ulrich, D.O., Nason, S.W., & Von Glinow, M.A. (1999). Organizational learning

[Special aspects of quality of Tibetan medicines--insights from over 40 years of manufacturing experience in Switzerland].

PubMed

Schwabl, Alexandra; Gämperle, Erich

2013-01-01

Tibetan recipes are complex formulas from plant and mineral ingredients. Padma Inc. has been producing selected formulas from Tibetan Medicine in Switzerland since more than 40 years. Modern quality standards and Good Manufacturing Practice (GMP) guidelines are followed, ensuring the quality of the raw materials through the manufacturing processes to the finished product. The aim is to provide these valuable formulas to people in the West in a consistently high quality 'made in Switzerland'. The production according to modern quality standards is challenging, draws on many resources, and requires specialized expertise, e.g. in the procurement of raw materials and the quality analysis including pharmacognostic and botanical knowledge.

Functional properties of gluten-free pasta produced from amaranth, quinoa and buckwheat.

PubMed

Schoenlechner, Regine; Drausinger, Julian; Ottenschlaeger, Veronika; Jurackova, Katerina; Berghofer, Emmerich

2010-12-01

The use of amaranth, quinoa and buckwheat for the production of gluten-free pasta was investigated in the present study. The aim of the work was to produce pasta of good textural quality, in particular, low cooking loss, optimal cooking weight and texture firmness. The results demonstrated that pasta produced from amaranth had decreased texture firmness and cooking time, while pasta from quinoa mainly showed increased cooking loss. In buckwheat pasta the least negative effects were observed. By combination of all three raw materials to one flour blend in the ratio of 60% buckwheat, 20% amaranth and 20% quinoa, dough matrix was improved. After decreasing dough moisture to 30%, addition of an increased amount of egg white powder of 6% and addition of 1.2% emulsifier (distilled monoglycerides) texture firmness as well as cooking quality of gluten-free pasta produced from such a flour blend reached acceptable values comparable to wheat pasta.

Rapid preparation of lecture slides.

PubMed

Persson, A V; Frusha, J D; Chevalier, R J

1985-02-01

When lecture slides must be prepared at a moment's notice, these methods of rapid preparation will allow you to create good quality slides. Although rush jobs are usually associated with higher costs, using these methods will keep the price per slide to a minimum. An investment must be made for the initial equipment, but the cost per slide is much less than that of slides produced by the standard methods. Type produced by typewriters or computer printers is adequate for most slides, but better slides can be produced with KroyType or Letraset letters. The KL film is preferred for reverse slides of text or line drawings, and the RPC film for production of radiographic slides. If an X-omat developer is not available, Polaroid film is a good alternative for rapid production of slides. The KL reverse slide projects best and can be colored, but RPC film produces a good positive slide of typed material. We have also photographed from a computer terminal screen using the KL film to make positive slides, the Polaroid continuous tone film for reverse slides, and Polaroid color film for color slides of material composed on a computer terminal with multicolor and graphics capabilities.

Evaluating the Operational Content of Contestable Market Theory.

DTIC Science & Technology

1986-12-01

inputs needed for production would be avialable to any firm at the market price ; and ii) The cost of collusion amoung the producers is prohibitively high... advertising costs or increase the quality (and hence the costs) of his product to produce a perfect 9 substitute for the entrant’s good. Thus, free entry alone...n x 1) vector, where n is the number of different products produced by the firm. A firm’s output is denoted by X. Similarly, price is a (n x 1) vector

Near-rail yard air quality--assessment through field measurements and computational fluid dynamics modeling

EPA Science Inventory

Compared to truck transport, goods movement by rail produces generally lower air pollutant emissions (e.g., particulate matter, carbon dioxide) per ton of freight transported. Emissions associated with rail transport are also confined to rail corridors which may lower the risk of...

Simultaneous phylogeny reconstruction and multiple sequence alignment

PubMed Central

Yue, Feng; Shi, Jian; Tang, Jijun

2009-01-01

Background A phylogeny is the evolutionary history of a group of organisms. To date, sequence data is still the most used data type for phylogenetic reconstruction. Before any sequences can be used for phylogeny reconstruction, they must be aligned, and the quality of the multiple sequence alignment has been shown to affect the quality of the inferred phylogeny. At the same time, all the current multiple sequence alignment programs use a guide tree to produce the alignment and experiments showed that good guide trees can significantly improve the multiple alignment quality. Results We devise a new algorithm to simultaneously align multiple sequences and search for the phylogenetic tree that leads to the best alignment. We also implemented the algorithm as a C program package, which can handle both DNA and protein data and can take simple cost model as well as complex substitution matrices, such as PAM250 or BLOSUM62. The performance of the new method are compared with those from other popular multiple sequence alignment tools, including the widely used programs such as ClustalW and T-Coffee. Experimental results suggest that this method has good performance in terms of both phylogeny accuracy and alignment quality. Conclusion We present an algorithm to align multiple sequences and reconstruct the phylogenies that minimize the alignment score, which is based on an efficient algorithm to solve the median problems for three sequences. Our extensive experiments suggest that this method is very promising and can produce high quality phylogenies and alignments. PMID:19208110

New CVD-based method for the growth of high-quality crystalline zinc oxide layers

NASA Astrophysics Data System (ADS)

Huber, Florian; Madel, Manfred; Reiser, Anton; Bauer, Sebastian; Thonke, Klaus

2016-07-01

High-quality zinc oxide (ZnO) layers were grown using a new chemical vapour deposition (CVD)-based low-cost growth method. The process is characterized by total simplicity, high growth rates, and cheap, less hazardous precursors. To produce elementary zinc vapour, methane (CH4) is used to reduce a ZnO powder. By re-oxidizing the zinc with pure oxygen, highly crystalline ZnO layers were grown on gallium nitride (GaN) layers and on sapphire substrates with an aluminum nitride (AlN) nucleation layer. Using simple CH4 as precursor has the big advantage of good controllability and the avoidance of highly toxic gases like nitrogen oxides. In photoluminescence (PL) measurements the samples show a strong near-band-edge emission and a sharp line width at 5 K. The good crystal quality has been confirmed in high resolution X-ray diffraction (HRXRD) measurements. This new growth method has great potential for industrial large-scale production of high-quality single crystal ZnO layers.

Rural Productivity Zones (RPZs) for microenterprises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, R.D.

1997-12-01

In this paper the authors discuss the concept of rural productivity zones (RPZs) which are defined as a business incubator to foster income-producing opportunities for the rural poor. The essential ingredients of such a program include: electric power; business development assistance; office services; and quality work space. The electric power source must be a good quality system, consisting of a diesel/wind/photovoltaic hybrid type system, providing reliable service, with a local maintenance program and a functional load management program.

Hot water, fresh beer, and salt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, F.S.

1990-11-01

In the hot chocolate effect'' the best musical scales (those with the finest tone quality, largest range, and best tempo) are obtained by adding salt to a glass of hot water supersaturated with air. Good scales can also be obtained by adding salt to a glass of freshly opened beer (supersaturated with CO{sub 2}) provided you first (a) get rid of much of the excess CO{sub 2} so as to produce smaller, hence slower, rising bubbles, and (b) get rid of the head of foam, which damps the standing wave and ruins the tone quality. Finally the old question, Domore » ionizing particles produce bubbles in fresh beer '' is answered experimentally.« less

Assessment of the Quality of Digital Terrain Model Produced from Unmanned Aerial System Imagery

NASA Astrophysics Data System (ADS)

Kosmatin Fras, M.; Kerin, A.; Mesarič, M.; Peterman, V.; Grigillo, D.

2016-06-01

Production of digital terrain model (DTM) is one of the most usual tasks when processing photogrammetric point cloud generated from Unmanned Aerial System (UAS) imagery. The quality of the DTM produced in this way depends on different factors: the quality of imagery, image orientation and camera calibration, point cloud filtering, interpolation methods etc. However, the assessment of the real quality of DTM is very important for its further use and applications. In this paper we first describe the main steps of UAS imagery acquisition and processing based on practical test field survey and data. The main focus of this paper is to present the approach to DTM quality assessment and to give a practical example on the test field data. For data processing and DTM quality assessment presented in this paper mainly the in-house developed computer programs have been used. The quality of DTM comprises its accuracy, density, and completeness. Different accuracy measures like RMSE, median, normalized median absolute deviation and their confidence interval, quantiles are computed. The completeness of the DTM is very often overlooked quality parameter, but when DTM is produced from the point cloud this should not be neglected as some areas might be very sparsely covered by points. The original density is presented with density plot or map. The completeness is presented by the map of point density and the map of distances between grid points and terrain points. The results in the test area show great potential of the DTM produced from UAS imagery, in the sense of detailed representation of the terrain as well as good height accuracy.

Inexpensive Strobe-Like Photographs

ERIC Educational Resources Information Center

Medeiros, Emil L.; Tavares, Odilon A. P.; Duarte, Sergio B.

2009-01-01

This paper reports on a technique the authors have developed to produce and analyze, at very low cost, good quality strobe-like photographs. While the concept is similar to the one described by Graney and DiNoto, the strategy described here benefits from recent advances in the fields of digital photography and related software to significantly…

Physical properties of microencapsulated gamma-3 salmon oil with egg white powder

USDA-ARS?s Scientific Manuscript database

Microencapsulated salmon oil with egg white powders are a good source of high quality protein and amino acids including leucine and omega-3 fatty acids, which may be beneficial for athletes. The study demonstrated that egg white powders containing omega-3 salmon oil can be effectively produced by sp...

Sugar yield and composition of tubers from Jerusalem Artichoke (Helianthus tuberosus) irrigated with saline waters

USDA-ARS?s Scientific Manuscript database

Currently, major biofuel crops are also food crops that demand fertile soils and good-quality water. Jerusalem artichoke (Helianthus tuberosus, Asteraceae) produces high tonnage of tubers that are rich in sugars, mainly in the form of inulin. In this study, plants of the cultivar “White Fuseau” grow...

Bulk Crystal Growth of Nonlinear Optical Organic Materials Using Inverted Vertical Gradient Freeze Method

NASA Technical Reports Server (NTRS)

Choi, J.; Cruz, Magda; Metzl, R.; Wang, W. S.; Aggarwal, M. D.; Penn, Benjamin G.; Frazier, Donald O.

1998-01-01

A new process for producing large bulk single crystals of benzil (C6H5COCOC6H5) is reported in this paper. Good quality crystals have been successfully grown using this approach to crystal growth. This method seems to be very promising for other thermally stable NLO organic materials also. The entire contents vycor crucible 1.5 inch in diameter and 2 inch deep was converted to single crystal. Purity of the starting growth material is also an important factor in the final quality of the grown crystals. The entire crystal can be very easily taken out of the crucible by simple maneuvering. Initial characterization of the grown crystals indicated that the crystals are as good as other crystals grown by conventional Bridgman Stockbarger technique.

Quality Risk Management: Putting GMP Controls First.

PubMed

O'Donnell, Kevin; Greene, Anne; Zwitkovits, Michael; Calnan, Nuala

2012-01-01

This paper presents a practical way in which current approaches to quality risk management (QRM) may be improved, such that they better support qualification, validation programs, and change control proposals at manufacturing sites. The paper is focused on the treatment of good manufacturing practice (GMP) controls during QRM exercises. It specifically addresses why it is important to evaluate and classify such controls in terms of how they affect the severity, probability of occurrence, and detection ratings that may be assigned to potential failure modes or negative events. It also presents a QRM process that is designed to directly link the outputs of risk assessments and risk control activities with qualification and validation protocols in the GMP environment. This paper concerns the need for improvement in the use of risk-based principles and tools when working to ensure that the manufacturing processes used to produce medicines, and their related equipment, are appropriate. Manufacturing processes need to be validated (or proven) to demonstrate that they can produce a medicine of the required quality. The items of equipment used in such processes need to be qualified, in order to prove that they are fit for their intended use. Quality risk management (QRM) tools can be used to support such qualification and validation activities, but their use should be science-based and subject to as little subjectivity and uncertainty as possible. When changes are proposed to manufacturing processes, equipment, or related activities, they also need careful evaluation to ensure that any risks present are managed effectively. This paper presents a practical approach to how QRM may be improved so that it better supports qualification, validation programs, and change control proposals in a more scientific way. This improved approach is based on the treatment of what are called good manufacturing process (GMP) controls during those QRM exercises. A GMP control can be considered to be any control that is put in place to assure product quality and regulatory compliance. This improved approach is also based on how the detectability of risks is assessed. This is important because when producing medicines, it is not always good practice to place a high reliance upon detection-type controls in the absence of an adequate level of assurance in the manufacturing process that leads to the finished medicine.

How Many Pixels Does It Take to Make a Good 4"×6" Print? Pixel Count Wars Revisited

NASA Astrophysics Data System (ADS)

Kriss, Michael A.

Digital still cameras emerged following the introduction of the Sony Mavica analog prototype camera in 1981. These early cameras produced poor image quality and did not challenge film cameras for overall quality. By 1995 digital still cameras in expensive SLR formats had 6 mega-pixels and produced high quality images (with significant image processing). In 2005 significant improvement in image quality was apparent and lower prices for digital still cameras (DSCs) started a rapid decline in film usage and film camera sells. By 2010 film usage was mostly limited to professionals and the motion picture industry. The rise of DSCs was marked by a “pixel war” where the driving feature of the cameras was the pixel count where even moderate cost, ˜120, DSCs would have 14 mega-pixels. The improvement of CMOS technology pushed this trend of lower prices and higher pixel counts. Only the single lens reflex cameras had large sensors and large pixels. The drive for smaller pixels hurt the quality aspects of the final image (sharpness, noise, speed, and exposure latitude). Only today are camera manufactures starting to reverse their course and producing DSCs with larger sensors and pixels. This paper will explore why larger pixels and sensors are key to the future of DSCs.

Leadership and the quality of care

PubMed Central

Firth-Cozens, J; Mowbray, D

2001-01-01

The importance of good leadership is becoming increasingly apparent within health care. This paper reviews evidence which shows that it has effects, not only on financial management, but on the quality of care provided. Some theories of leadership are discussed, primarily in terms of how different types of leaders might affect quality in different ways, including the effects that they might have on the stress or wellbeing of their staff which, in turn, is related to the quality of care produced. Finally, the conflicts shown in terms of leadership within the context of health care are discussed, leading to the conclusion that development programmes must be specially tailored to address the complexities of this arena. Key Words: leadership; quality of care; stress; personality PMID:11700372

A fast and efficient segmentation scheme for cell microscopic image.

PubMed

Lebrun, G; Charrier, C; Lezoray, O; Meurie, C; Cardot, H

2007-04-27

Microscopic cellular image segmentation schemes must be efficient for reliable analysis and fast to process huge quantity of images. Recent studies have focused on improving segmentation quality. Several segmentation schemes have good quality but processing time is too expensive to deal with a great number of images per day. For segmentation schemes based on pixel classification, the classifier design is crucial since it is the one which requires most of the processing time necessary to segment an image. The main contribution of this work is focused on how to reduce the complexity of decision functions produced by support vector machines (SVM) while preserving recognition rate. Vector quantization is used in order to reduce the inherent redundancy present in huge pixel databases (i.e. images with expert pixel segmentation). Hybrid color space design is also used in order to improve data set size reduction rate and recognition rate. A new decision function quality criterion is defined to select good trade-off between recognition rate and processing time of pixel decision function. The first results of this study show that fast and efficient pixel classification with SVM is possible. Moreover posterior class pixel probability estimation is easy to compute with Platt method. Then a new segmentation scheme using probabilistic pixel classification has been developed. This one has several free parameters and an automatic selection must dealt with, but criteria for evaluate segmentation quality are not well adapted for cell segmentation, especially when comparison with expert pixel segmentation must be achieved. Another important contribution in this paper is the definition of a new quality criterion for evaluation of cell segmentation. The results presented here show that the selection of free parameters of the segmentation scheme by optimisation of the new quality cell segmentation criterion produces efficient cell segmentation.

The use of health related quality of life data to produce information sheets for patients with head and neck cancer.

PubMed

Rogers, S N; Hogg, E S; Cheung, W K A; Lai, L K L; Jassal, P; Lowe, D

2015-07-01

Health related quality of life information gives patients and carers an indication of how they will be affected following treatment. Such knowledge can promote realistic expectations and help patients come to terms with their outcome. The aim of this paper is to describe the background development of patient information sheets produced at our unit. The data were compiled using a common head and neck cancer specific quality of life questionnaire (University of Washington Quality of Life [UW-QOL]). There are 12 domains comprising activity, appearance, anxiety, chewing, mood, pain, recreation, saliva, shoulder, speech, swallowing and taste. The data were collected over 19 years at our unit and focus on follow-up records at around 2 years as this gives a good indication of health related quality of life in survivorship. UW-QOL questionnaires were available from 1,511 patients treated following primary diagnosis of head and neck cancer, and there were 24 subgroups based on cancer site, stage and treatment. There were 2 other subgroups: 132 having transoral laser resection and 176 having laryngectomy. The patient and carer research forum helped to design the information sheets, which display overall quality of life, percentages with 'good' outcome and 'significant problem' by domain, and the most important domains. Three examples are included in this paper: early stage oral cancer treated by surgery alone, early laryngeal cancer treated by surgery alone, and late stage oropharyngeal cancer treated by surgery and postoperative radiotherapy. All 26 subgroup information sheets are available in booklet form and on the internet. How the surgical community best utilises this type of resource needs further research.

The good laboratory practice and good clinical practice requirements for the production of radiopharmaceuticals in clinical research.

PubMed

De Vos, Filip J; De Decker, Mario; Dierckx, Rudi A

2005-07-01

Radiopharmaceuticals account for more than 95% of the group of sterile pharmaceutical products and should therefore be handled and produced with care. Since the introduction of the European directive, all pharmaceuticals used in clinical studies must be prepared under good manufacturing practice (GMP) conditions. This review aims to give an overview of the basic principles and guidelines for the preparation of radiopharmaceuticals. Special attention is given to the production area environment and personnel, the two basic requirements for GMP productions. Especially for the production area, two philosophies have to be combined: the cascade system of over-pressure for the production of pharmaceuticals and the under pressure system for the manufacturing of radioisotopes. Personnel should be selected based on education and regularly given special training for the handling of radioactive material. Compared to pharmaceuticals, radiopharmaceuticals have their own labels, taking into account their specific nature. Besides the standard quality control, other items for quality control of radiopharmaceuticals are also discussed in this article.

Insight into the prevalence and distribution of microbial contamination to evaluate water management in the fresh produce processing industry.

PubMed

Holvoet, Kevin; Jacxsens, Liesbeth; Sampers, Imca; Uyttendaele, Mieke

2012-04-01

This study provided insight into the degree of microbial contamination in the processing chain of prepacked (bagged) lettuce in two Belgian fresh-cut produce processing companies. The pathogens Salmonella and Listeria monocytogenes were not detected. Total psychrotrophic aerobic bacterial counts (TPACs) in water samples, fresh produce, and environmental samples suggested that the TPAC is not a good indicator of overall quality and best manufacturing practices during production and processing. Because of the high TPACs in the harvested lettuce crops, the process water becomes quickly contaminated, and subsequent TPACs do not change much throughout the production process of a batch. The hygiene indicator Escherichia coli was used to assess the water management practices in these two companies in relation to food safety. Practices such as insufficient cleaning and disinfection of washing baths, irregular refilling of the produce wash baths with water of good microbial quality, and the use of high product/water ratios resulted in a rapid increase in E. coli in the processing water, with potential transfer to the end product (fresh-cut lettuce). The washing step in the production of fresh-cut lettuce was identified as a potential pathway for dispersion of microorganisms and introduction of E. coli to the end product via cross-contamination. An intervention step to reduce microbial contamination is needed, particularly when no sanitizers are used as is the case in some European Union countries. Thus, from a food safety point of view proper water management (and its validation) is a critical point in the fresh-cut produce processing industry.

Morphological and starch structural characteristics of the Japonica rice mutant variety Seolgaeng for dry-milled flour

USDA-ARS?s Scientific Manuscript database

Producing fine, good quality rice flour is more difficult than wheat flour because the rice grain is harder. In this study, we analyzed the relationship between the morphology and starch of kernels from genetically different rice varieties that can be used to make dry-milled flour. The non-glutinous...

Navy Fact File 1984

DTIC Science & Technology

1984-10-01

Textile Fibers/Products Foods , Feeds, Beverages Industrial Supplies Value of Goods Exported ($ billions) 1958 1968 1978 $18.1 billion...character of its government, the soundness of its economy, its industrial efficiency, the development of its internal communications, the quality...decades the United States produced more raw materials than its growing industrial complex could consume. From a raw-materials-surplus-nation we

A Collaborative Design Curriculum for Reviving Sheet Metal Handicraft

ERIC Educational Resources Information Center

Chan, Patrick K. C.

2015-01-01

Galvanised sheet metal was a popular and important material for producing handmade home utensils in Hong Kong from the 1930s onwards. It was gradually replaced by new materials like stainless steel and plastic because similar goods made with these are cheaper, more standardised, more durable and of much better quality. The handicrafts behind sheet…

From Scare Tactics to Reasoned Decisions: A Decade of Drug Education Films.

ERIC Educational Resources Information Center

Sheppard, Margaret A.; Goodstadt, Michael S.

1982-01-01

Examines the reviews of 421 drug education films prepared over the last decade by the Audiovisual Assessment Group of the Addiction Research Foundation of Ontario. Also outlines the criteria that good drug education films meet and mentions areas for which high quality drug education films have not yet been produced. (Author/JL)

Composting of animal manures and chemical criteria for compost maturity assessment. A review.

PubMed

Bernal, M P; Alburquerque, J A; Moral, R

2009-11-01

New livestock production systems, based on intensification in large farms, produce huge amount of manures and slurries without enough agricultural land for their direct application as fertilisers. Composting is increasingly considered a good way for recycling the surplus of manure as a stabilised and sanitised end-product for agriculture, and much research work has been carried out in the last decade. However, high quality compost should be produced to overcome the cost of composting. In order to provide and review the information found in the literature about manure composting, the first part of this paper explains the basic concepts of the composting process and how manure characteristics can influence its performance. Then, a summary of those factors such as nitrogen losses (which directly reduce the nutrient content), organic matter humification and compost maturity which affect the quality of composts produced by manure composting is presented. Special attention has been paid to the relevance of using an adequate bulking agent for reducing N-losses and the necessity of standardising the maturity indices due to their great importance amongst compost quality criteria.

A professional and cost effective digital video editing and image storage system for the operating room.

PubMed

Scollato, A; Perrini, P; Benedetto, N; Di Lorenzo, N

2007-06-01

We propose an easy-to-construct digital video editing system ideal to produce video documentation and still images. A digital video editing system applicable to many video sources in the operating room is described in detail. The proposed system has proved easy to use and permits one to obtain videography quickly and easily. Mixing different streams of video input from all the devices in use in the operating room, the application of filters and effects produces a final, professional end-product. Recording on a DVD provides an inexpensive, portable and easy-to-use medium to store or re-edit or tape at a later time. From stored videography it is easy to extract high-quality, still images useful for teaching, presentations and publications. In conclusion digital videography and still photography can easily be recorded by the proposed system, producing high-quality video recording. The use of firewire ports provides good compatibility with next-generation hardware and software. The high standard of quality makes the proposed system one of the lowest priced products available today.

Full-frame video stabilization with motion inpainting.

PubMed

Matsushita, Yasuyuki; Ofek, Eyal; Ge, Weina; Tang, Xiaoou; Shum, Heung-Yeung

2006-07-01

Video stabilization is an important video enhancement technology which aims at removing annoying shaky motion from videos. We propose a practical and robust approach of video stabilization that produces full-frame stabilized videos with good visual quality. While most previous methods end up with producing smaller size stabilized videos, our completion method can produce full-frame videos by naturally filling in missing image parts by locally aligning image data of neighboring frames. To achieve this, motion inpainting is proposed to enforce spatial and temporal consistency of the completion in both static and dynamic image areas. In addition, image quality in the stabilized video is enhanced with a new practical deblurring algorithm. Instead of estimating point spread functions, our method transfers and interpolates sharper image pixels of neighboring frames to increase the sharpness of the frame. The proposed video completion and deblurring methods enabled us to develop a complete video stabilizer which can naturally keep the original image quality in the stabilized videos. The effectiveness of our method is confirmed by extensive experiments over a wide variety of videos.

Seasonal differences in climate in the Chianti region of Tuscany and the relationship to vintage wine quality

NASA Astrophysics Data System (ADS)

Salinger, Michael James; Baldi, Marina; Grifoni, Daniele; Jones, Greg; Bartolini, Giorgio; Cecchi, Stefano; Messeri, Gianni; Dalla Marta, Anna; Orlandini, Simone; Dalu, Giovanni A.; Maracchi, Gianpiero

2015-12-01

Climatic factors and weather type frequencies affecting Tuscany are examined to discriminate between vintages ranked into the upper- and lower-quartile years as a consensus from six rating sources of Chianti wine during the period 1980 to 2011. These rankings represent a considerable improvement on any individual publisher ranking, displaying an overall good consensus for the best and worst vintage years. Climate variables are calculated and weather type frequencies are matched between the eight highest and the eight lowest ranked vintages in the main phenological phases of Sangiovese grapevine. Results show that higher heat units; mean, maximum and minimum temperature; and more days with temperature above 35 °C were the most important discriminators between good- and poor-quality vintages in the spring and summer growth phases, with heat units important during ripening. Precipitation influences on vintage quality are significant only during veraison where low precipitation amounts and precipitation days are important for better quality vintages. In agreement with these findings, weather type analysis shows good vintages are favoured by weather type 4 (more anticyclones over central Mediterranean Europe (CME)), giving warm dry growing season conditions. Poor vintages all relate to higher frequencies of either weather type 3, which, by producing perturbation crossing CME, favours cooler and wetter conditions, and/or weather type 7 which favours cold dry continental air masses from the east and north east over CME. This approach shows there are important weather type frequency differences between good- and poor-quality vintages. Trend analysis shows that changes in weather type frequencies are more important than any due to global warming.

Seasonal differences in climate in the Chianti region of Tuscany and the relationship to vintage wine quality.

PubMed

Salinger, Michael James; Baldi, Marina; Grifoni, Daniele; Jones, Greg; Bartolini, Giorgio; Cecchi, Stefano; Messeri, Gianni; Dalla Marta, Anna; Orlandini, Simone; Dalu, Giovanni A; Maracchi, Gianpiero

2015-12-01

Climatic factors and weather type frequencies affecting Tuscany are examined to discriminate between vintages ranked into the upper- and lower-quartile years as a consensus from six rating sources of Chianti wine during the period 1980 to 2011. These rankings represent a considerable improvement on any individual publisher ranking, displaying an overall good consensus for the best and worst vintage years. Climate variables are calculated and weather type frequencies are matched between the eight highest and the eight lowest ranked vintages in the main phenological phases of Sangiovese grapevine. Results show that higher heat units; mean, maximum and minimum temperature; and more days with temperature above 35 °C were the most important discriminators between good- and poor-quality vintages in the spring and summer growth phases, with heat units important during ripening. Precipitation influences on vintage quality are significant only during veraison where low precipitation amounts and precipitation days are important for better quality vintages. In agreement with these findings, weather type analysis shows good vintages are favoured by weather type 4 (more anticyclones over central Mediterranean Europe (CME)), giving warm dry growing season conditions. Poor vintages all relate to higher frequencies of either weather type 3, which, by producing perturbation crossing CME, favours cooler and wetter conditions, and/or weather type 7 which favours cold dry continental air masses from the east and north east over CME. This approach shows there are important weather type frequency differences between good- and poor-quality vintages. Trend analysis shows that changes in weather type frequencies are more important than any due to global warming.

Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

NASA Astrophysics Data System (ADS)

Tagliaferri, G.; Basso, S.; Borghi, G.; Burkert, W.; Citterio, O.; Civitani, M.; Conconi, P.; Cotroneo, V.; Freyberg, M.; Garoli, D.; Gorenstein, P.; Hartner, G.; Mattarello, V.; Orlandi, A.; Pareschi, G.; Romaine, S.; Spiga, D.; Valsecchi, G.; Vernani, D.

2009-05-01

Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission, ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV, iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.

High power far-infrared optical parametric oscillator with high beam quality

NASA Astrophysics Data System (ADS)

Qian, Chuan-Peng; Shen, Ying-Jie; Dai, Tong-Yu; Duan, Xiao-Ming; Yao, Bao-Quan

2016-11-01

A high power ZnGeP2 (ZGP) optical parametric oscillator (OPO) with good beam quality pumped by a Q-switched Ho:YAG laser was demonstrated. The maximum output power of the ZGP OPO with a four-mirror ring cavity was about 5.04 W around 8.1 μm with 83.9 W Ho incident pump power, corresponding to a slope efficiency of 9.2 %. The ZGP OPO produced 36.0 ns far-IR pulse laser in the 8.0-8.3 μm spectral regions. The beam quality was measured to be M2 1.6 at the highest output power.

Effect of body condition and season on yield and quality of in vitro produced bovine embryos.

PubMed

Chrenek, Peter; Kubovičová, Elena; Olexíková, Lucia; Makarevich, Alexander V; Toporcerová, Silvia; Ostró, Alexander

2015-12-01

The aim of our study was to examine the effects of cow's body condition score (BCS; scale 1-5) and season on the quality of bovine in vitro produced embryos. The proportion of good quality oocytes (Q1 and Q2) was higher (P < 0.05) in the BCS 2 (57.60%) and BCS 3 (60.90%) groups compared with the BCS 1 (43.60%) group. There were no statistical differences in embryo cleavage and blastocyst rate among the BCS groups. The highest total cell number (TCN, DAPI stain) of blastocysts (P < 0.05), recorded in BCS 1 (122.27 ± 6.90) in comparison with BCS 2 (101.8 ± 3.60) or BCS 3 (105.44 ± 3.70) groups, was related to higher dead cell (DCI, TUNEL) index in this group (7.07%) when compared with BCS 2 (6.54%) or BCS 3 (6.06%), respectively. The yield of good quality oocytes during spring was lower (P < 0.05) compared with the summer season. There were significant differences (P < 0.05) in maturation and cleavage rates between autumn and summer (73.42%, 76.2% vs. 85.0%, 41.8%, respectively). The highest (P < 0.01) blastocyst rate was noted during spring and summer months. Significant difference (P < 0.05) in the TCN among spring (99.38 ± 3.90), autumn (110.1 ± 4.58) or summer (108.96 ± 3.52) was observed. The highest proportion of embryos with the best (grade I) actin cytoskeleton (phalloidin-TRITC) quality was noted during the summer months. Our results indicate that body condition affects the initial quality of oocytes, but does not affect embryo cleavage, blastocyst rate and actin quality. This finding may suggest that development in vitro can mask the influence of BCS. The season affects yield and quality of blastocysts in the way that the autumn period is more favorable for embryo development.

Inexpensive Strobe-like Photographs

NASA Astrophysics Data System (ADS)

Medeiros, Emil L.; Tavares, Odilon A. P.; Duarte, Sérgio B.

2009-11-01

This paper reports on a technique the authors have developed to produce and analyze, at very low cost, good quality strobe-like photographs like the one shown in Figs. 1(a) and 1(b). While the concept is similar to the one described by Graney and DiNoto, the strategy described here benefits from recent advances in the fields of digital photography and related software to significantly reduce the costs, simplify the production process, and enhance the final quality of photographs of this type, as well as to obtain greater accuracy in measurements made with them.

Approach path control for powered-lift STOL aircraft

NASA Technical Reports Server (NTRS)

Clymer, D. J.; Flora, C. C.

1973-01-01

A flight control system concept is defined for approach flightpath control of an augmentor wing (or similar) powered-lift STOL configuration. The proposed STOL control concept produces aircraft transient and steady-state control responses that are familiar to pilots of conventional jet transports, and has potential for good handling qualities ratings in all approach and landing phases. The effects of trailing-edge rate limits, real-engine dynamics, and atmospheric turbulence are considered in the study. A general discussion of STOL handling qualities problems and piloting techniques is included.

Simple solution to the medical instrumentation software problem

NASA Astrophysics Data System (ADS)

Leif, Robert C.; Leif, Suzanne B.; Leif, Stephanie H.; Bingue, E.

1995-04-01

Medical devices now include a substantial software component, which is both difficult and expensive to produce and maintain. Medical software must be developed according to `Good Manufacturing Practices', GMP. Good Manufacturing Practices as specified by the FDA and ISO requires the definition and compliance to a software processes which ensures quality products by specifying a detailed method of software construction. The software process should be based on accepted standards. US Department of Defense software standards and technology can both facilitate the development and improve the quality of medical systems. We describe the advantages of employing Mil-Std-498, Software Development and Documentation, and the Ada programming language. Ada provides the very broad range of functionalities, from embedded real-time to management information systems required by many medical devices. It also includes advanced facilities for object oriented programming and software engineering.

Sputum, sex and scanty smears: new case definition may reduce sex disparities in smear-positive tuberculosis.

PubMed

Ramsay, A; Bonnet, M; Gagnidze, L; Githui, W; Varaine, F; Guérin, P J

2009-05-01

Urban clinic, Nairobi. To evaluate the impact of specimen quality and different smear-positive tuberculosis (TB) case (SPC) definitions on SPC detection by sex. Prospective study among TB suspects. A total of 695 patients were recruited: 644 produced > or =1 specimen for microscopy. The male/female sex ratio was 0.8. There were no significant differences in numbers of men and women submitting three specimens (274/314 vs. 339/380, P = 0.43). Significantly more men than women produced a set of three 'good' quality specimens (175/274 vs. 182/339, P = 0.01). Lowering thresholds for definitions to include scanty smears resulted in increases in SPC detection in both sexes; the increase was significantly higher for women. The revised World Health Organization (WHO) case definition was associated with the highest detection rates in women. When analysis was restricted only to patients submitting 'good' quality specimen sets, the difference in detection between sexes was on the threshold for significance (P = 0.05). Higher SPC notification rates in men are commonly reported by TB control programmes. The revised WHO SPC definition may reduce sex disparities in notification. This should be considered when evaluating other interventions aimed at reducing these. Further study is required on the effects of the human immuno-deficiency virus and instructed specimen collection on sex-specific impact of new SPC definition.

Direct Reduction of Iron Ore

NASA Astrophysics Data System (ADS)

Small, M.

1981-04-01

In the search for a pure, available iron source, steelmakers are focusing their attention on Directly Reduced Iron (DRI). This material is produced by the reaction of a low gangue iron ore with a hydrocarbonaceous substance. Commercially, DRI is generated in four different reactors: shaft (moving-bed), rotary kiln, fluidized bed, and retort (fixed-bed). Annual worldwide production capacity approaches 33 million metric tons. Detailed assessments have been made of the uses of DRI, especially as a substitute for scrap in electric furnace (EF) steelmaking. DRI is generally of a quality superior to current grades of scrap, with steels produced more efficiently in the EF and containing lower levels of impurities. However, present economics favor EF steel production with scrap. But this situation could change within this decade because of a developing scarcity of good quality scrap.

NASA. Langley Research Center dry powder towpreg system

NASA Technical Reports Server (NTRS)

Baucom, Robert M.; Marchello, Joseph M.

1990-01-01

Dry powder polymer impregnated carbon fiber tows were produced for preform weaving and composite materials molding applications. In the process, fluidized powder is deposited on spread tow bundles and melted on the fibers by radiant heating to adhere the polymer to the fiber. Unit design theory and operating correlations were developed to provide the basis for scale up of the process to commercial operation. Special features of the operation are the pneumatic tow spreader, fluidized bed, resin feeder, and quality control system. Bench scale experiments, at tow speeds up to 50 cm/sec, demonstrated that process variables can be controlled to produce weavable LARC-TPI carbon fiber towpreg. The towpreg made by the dry powder process was formed into unidirectional fiber moldings and was woven and molded into preform material of good quality.

The Effectiveness of Guided Inquiry Learning for Comparison Topics

NASA Astrophysics Data System (ADS)

Asnidar; Khabibah, S.; Sulaiman, R.

2018-01-01

This research aims at producing a good quality learning device using guided inquiry for comparison topics and describing the effectiveness of guided inquiry learning for comparison topics. This research is a developmental research using 4-D model. The result is learning device consisting of lesson plan, student’s worksheet, and achievement test. The subjects of the study were class VII students, each of which has 46 students. Based on the result in the experimental class, the learning device using guided inquiry for comparison topics has good quality. The learning device has met the valid, practical, and effective aspects. The result, especially in the implementation class, showed that the learning process with guided inquiry has fulfilled the effectiveness indicators. The ability of the teacher to manage the learning process has fulfilled the criteria good. In addition, the students’ activity has fulfilled the criteria of, at least, good. Moreover, the students’ responses to the learning device and the learning activities were positive, and the students were able to complete the classical learning. Based on the result of this research, it is expected that the learning device resulted can be used as an alternative learning device for teachers in implementing mathematic learning for comparison topics.

Dynamic Game Behavior of Retailers Considering the Quality of Substitute Products Based on Delay Decision

NASA Astrophysics Data System (ADS)

Bao, Binshuo; Ma, Junhai

2017-12-01

Motivated by the Silk Road Economic Belt and the 21st-Century Maritime Silk Road project, i.e. the Belt and Road (B&R), more goods will flow around the world. With this trading platform, people can buy products at relatively cheap prices, and it is easier for people to buy various goods. The quality and quantity of products thus attract more and more attention in the supply chains. This paper discusses the quantity decision by considering the product quality in parallel supply chains where two manufacturers produce substitute products and then sell them to their downstream retailers separately. In terms of the changing quantity, as well as the different quality, this paper establishes a dynamic game model to explore the dynamic behavior when the optimal profits of two retailers have been calculated. The dynamic behaviors of the system, such as stable region, bifurcation and chaos, strange attractors and the largest Lyapunov exponents (LLE) are analyzed. The effect of the quantity adjustment parameter on the stability of the supply chain system is investigated through numerical simulations. Furthermore, a dynamic game model is established based on the quality delay decision, to investigate the influence of the quality delay parameter on the dynamic game model and the profits. Finally, the optimal decisions are obtained and analyzed.

Influence of good manufacturing practices on the shelf life of refrigerated fillets of tilapia (Oreochromis niloticus) packed in modified atmosphere and gamma-irradiated

PubMed Central

Monteiro, Maria Lúcia Guerra; Mársico, Eliane Teixeira; Mano, Sérgio Borges; Teixeira, Claudia Emília; da Cruz Silva Canto, Anna Carolina Vilhena; de Carvalho Vital, Helio; Conte-Júnior, Carlos Adam

2013-01-01

This study evaluated the influence of good manufacturing practices (GMP) on the shelf life of refrigerated fillets of Nile tilapia (Oreochromis niloticus) packed in modified atmosphere packaging (MAP) and irradiated. In a first series of experiments, 120 tilapia fillets kept under controlled sanitary conditions were purchased from a fish market managed by a cooperative. A second lot totaling 200 tilapia fillets was obtained under controlled storage conditions from a pilot plant. The combined effects of MAP (40% CO2 and 60% N2) and irradiation (1.5 kGy) were investigated by monitoring physical and chemical (total volatile bases and pH), bacteriological (aerobic heterotrophic mesophilic and psychrophilic bacteria) and sensory (acceptance test) changes in the samples. The quality of samples decreased with storage time regardless of the treatment, remaining higher in fillets produced in the pilot plant in comparison with the commercially produced fillets. The observed shelf life of nonirradiated commercially produced fillets was only 3 days, compared to 8 days for those produced in the pilot plant, probably due to GMP in the latter. It was concluded that, even with a combination of proven conservation methods for meats, the adoption of good manufacturing practices still remains essential before, during, and after the filleting process in order to ensure the effectiveness of the entire treatment. PMID:24804034

Real-time scheduling using minimum search

NASA Technical Reports Server (NTRS)

Tadepalli, Prasad; Joshi, Varad

1992-01-01

In this paper we consider a simple model of real-time scheduling. We present a real-time scheduling system called RTS which is based on Korf's Minimin algorithm. Experimental results show that the schedule quality initially improves with the amount of look-ahead search and tapers off quickly. So it sppears that reasonably good schedules can be produced with a relatively shallow search.

75 FR 25244 - Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9145-4] Notice of a Project Waiver of Section 1605 (Buy... granting a project waiver of the Buy American requirements of ARRA Section 1605 under the authority of Section 1605(b)(2) [manufactured goods are not produced in the United States of a satisfactory quality] to...

75 FR 25243 - Notice of a Project Waiver of Section 1605 (Buy American Requirement) of the American Recovery...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9145-6] Notice of a Project Waiver of Section 1605 (Buy... granting a project waiver of the Buy American requirements of ARRA Section 1605 under the authority of Section 1605(b)(2) [manufactured goods are not produced in the United States of a satisfactory quality] to...

Examining Antecedents of Knowledge-Sharing Factors on Research Supervision: An Empirical Study

ERIC Educational Resources Information Center

Khosravi, Arash; Ahmad, Mohammad Nazir

2016-01-01

The use of an effective supervision mechanism is crucial between a student and supervisor. The essential knowledge shared and transferred between these two parties must be observed and understood very well in order to ensure that students are produced at good level of quality for future professional knowledge workers. The aim of this study was to…

Attack by Pyemotes johnmoseri (Acari: Pyemotidae)

Treesearch

Tulin Askit; Ibrahim Cakmak; John Moser

2007-01-01

The Aegean Region of Turkey is one of the largest dried fig producers in the world. A Turkish cultivar sarilop (Ficus carica cv. Calimyrna L.) possesses good qualities for drying process, and has been grown extensively for many years in Turkey. Hypoborus ficus is the most common xylophagous insect attacking fig trees in Aydin (Aks¸it et al. 2003). This pest attacks...

Seedbed Density Affects Size of 3-0 Green Ash Nursery Stock

Treesearch

J.H. Stoeckeler

1967-01-01

Nursery seedbed density of 3-0 green ash, which ranged from 4 to 36 trees per square foot at Carlos Avery Nursery, Forest Lake, Minn., had a marked effect on caliper, height, fresh weight, and percent and amound of plantable stock. The highest number of good-quality trees was produced at a density of 12.5 trees per square foot.

76 FR 63296 - Notice of a Regional Waiver of Section 1605 (Buy American requirement) of the American Recovery...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... goods are not produced in the United States in sufficient and reasonably available quantities and of a satisfactory quality] to the Utility for the purchase of a magnetic flow meter, manufactured in Mexico. This is... waiver based on project specific circumstances. The waiver applicant states that the project requires the...

Practice leadership and active support in residential services for people with intellectual disabilities: an exploratory study.

PubMed

Beadle-Brown, J; Mansell, J; Ashman, B; Ockenden, J; Iles, R; Whelton, B

2014-09-01

We hypothesised that a key factor determining the quality of active support was 'practice leadership' - provided by the first-line manager to focus staff attention and develop staff skills in providing direct support to enable people with intellectual disabilities to have a good quality of life. This exploratory study focused on what levels of practice leadership were found and its role in explaining variation in active support. Relevant aspects of management, including practice leadership, were assessed by questionnaires administered to staff in residential settings alongside observational measures of active support and resident engagement in meaningful activity. Relationships between these variables were explored using regression and post hoc group comparisons. There was wide variation, with average levels of practice leadership being low, though improving over the period studied. Practice leadership had a significant impact on active support, but was fully mediated by the effect of quality of management. When the quality of management was higher better practice leadership did produce a significant difference in active support. However, higher quality of management on its own did not produce better active support. A number of limitations are acknowledged and further research is required. Practice leadership appears to be an important factor in enabling staff to provide active support but as part of generally good management. Given the rather low levels found, attention needs to be given to the training, career development and support of practice leaders and also to how to protect their time from their many other responsibilities. © 2013 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Sleep Quality Among Low-Income Young Women in Southeast Texas Predicts Changes in Perceived Stress Through Hurricane Ike.

PubMed

Wu, Zhao Helen; Stevens, Richard G; Tennen, Howard; North, Carol S; Grady, James J; Holzer, Charles

2015-07-01

To document the time course of perceived stress among women through the period of a natural disaster, to determine the effect of sleep quality on this time course, and to identify risk factors that predict higher levels of perceived stress. Longitudinal study from 2006-2012. Community-based family planning clinics in southeast Texas. There were 296 women aged 18-31 y who experienced Hurricane Ike, September 2008. Cohen Perceived Stress Scale (PSS) was administered every 2 mo from 6 mo before to 12 mo after Hurricane Ike. Sleep quality was assessed 1 mo after Hurricane Ike using the Pittsburg Sleep Quality Index (PSQI). Good sleep was defined as a PSQI summary score < 5, and poor sleep as a score ≥ 5. Hurricane Ike stressors (e.g., property damage, subjective stressors) and pre-Ike lifetime major life events and emotional health (e.g., emotional dysregulation, self-control) were also assessed. Over the entire period of 18 mo (6 mo before and 12 mo after the hurricane), perceived stress was significantly higher among poor sleepers compared to good sleepers, and only good sleepers showed a significant decrease in perceived stress after Hurricane Ike. In addition, a higher level of perceived stress was positively associated with greater Ike damage among poor sleepers, whereas this correlation was not observed among good sleepers. In the final multivariate longitudinal model, Ike-related subjective stressors as well as baseline major life events and emotional dysregulation among poor sleepers predicted higher levels of perceived stress over time; among good sleepers, additional factors such as lower levels of self-control and having a history of a psychiatric disorder also predicted higher levels of perceived stress. Sleep quality after Hurricane Ike, an intense natural disaster producing substantial damage, impacted changes in perceived stress over time. Our findings suggest the possibility that providing victims of disasters with effective interventions to improve sleep quality could help to reduce their perceived stress over time. © 2015 Associated Professional Sleep Societies, LLC.

Learning the manifold of quality ultrasound acquisition.

PubMed

El-Zehiry, Noha; Yan, Michelle; Good, Sara; Fang, Tong; Zhou, S Kevin; Grady, Leo

2013-01-01

Ultrasound acquisition is a challenging task that requires simultaneous adjustment of several acquisition parameters (the depth, the focus, the frequency and its operation mode). If the acquisition parameters are not properly chosen, the resulting image will have a poor quality and will degrade the patient diagnosis and treatment workflow. Several hardware-based systems for autotuning the acquisition parameters have been previously proposed, but these solutions were largely abandoned because they failed to properly account for tissue inhomogeneity and other patient-specific characteristics. Consequently, in routine practice the clinician either uses population-based parameter presets or manually adjusts the acquisition parameters for each patient during the scan. In this paper, we revisit the problem of autotuning the acquisition parameters by taking a completely novel approach and producing a solution based on image analytics. Our solution is inspired by the autofocus capability of conventional digital cameras, but is significantly more challenging because the number of acquisition parameters is large and the determination of "good quality" images is more difficult to assess. Surprisingly, we show that the set of acquisition parameters which produce images that are favored by clinicians comprise a 1D manifold, allowing for a real-time optimization to maximize image quality. We demonstrate our method for acquisition parameter autotuning on several live patients, showing that our system can start with a poor initial set of parameters and automatically optimize the parameters to produce high quality images.

Improving chocolate flavor in poor-quality cocoa almonds by enzymatic treatment.

PubMed

Oliveira, Hilana Salete Silva; Mamede, Maria Eugênia Oliveira; Góes-Neto, Aristóteles; Koblitz, Maria Gabriela Bello

2011-01-01

This paper proposes a method to enzymatically treat poor-quality cocoa almonds (known as "slate") to ensure the formation of chocolate flavor precursors. The production of flavor precursors improves the quality of these almonds, which are usually responsible for the low quality of the liquor produced. Proteases and carboxypeptidases from different sources were tested under various conditions. The different treatments were evaluated by chemical analysis (hydrolysis efficiency) and sensory analysis of the treated material compared to good-quality cocoa almonds. The results show that it is possible, through the use of microbial enzymes, to generate the mixture of compounds that will release, after roasting, the characteristic chocolate flavor in poor-quality almonds. However, it is necessary to optimize the conditions of enzymatic treatment to obtain better results and thus establish a process that can be used for industrial purposes for manufacturing cocoa and chocolate. The basidiomycete Moniliophtora perniciosa is the causative agent of witches' broom disease (WBD) of the cocoa tree, whose seeds are the source of chocolate. It is the most important phytopathological problem of cocoa-producing areas of the American continent, and has decimated the Brazilian cocoa industry. In Bahia (Brazil), M. perniciosa was identified in 1989 and, as a consequence of its spreading, the annual production of cocoa almonds dropped from 450,000 to 90,000 tons within 12 y, reducing export values from an all-time high of about US$ 1 billion to 110 million. The high incidence of WBD incapacitates Brazil to produce enough cocoa almonds even for the internal market, leading the country to import low-quality cocoa almonds mainly from African countries. Our work proposes an enzymatic treatment to increase the quality of that cocoa almonds and, consequently, to improve the quality of the chocolate produced and consumed in the country. © 2011 Institute of Food Technologists®

"allometry" Deterministic Approaches in Cell Size, Cell Number and Crude Fiber Content Related to the Physical Quality of Kangkong (Ipomoea reptans) Grown Under Different Plant Density Pressures

NASA Astrophysics Data System (ADS)

Selamat, A.; Atiman, S. A.; Puteh, A.; Abdullah, N. A. P.; Mohamed, M. T. M.; Zulkeefli, A. A.; Othman, S.

Kangkong, especially the upland type (Ipomoea reptans) is popularly consumed as a vegetable dish in the South East Asian countries for its quality related to Vitamins (A and C) and crude fiber contents. Higher fiber contents would prevent from the occurrence of colon cancer and diverticular disease. With young stem edible portion, its cell number and size contribute to the stem crude fiber content. The mathematical approach of allometry of cell size, number, and fiber content of stem could be used in determining the 'best' plant density pressure in producing the quality young stem to be consumed. Basically, allometry is the ratio of relative increment (growth or change) rates of two parameters, or the change rate associated to the log of measured variables relationship. Kangkog grown equal or lower than 55 plants m-2 produced bigger individual plant and good quality (physical) kangkong leafy vegetable, but with lower total yield per unit area as compared to those grown at higher densities.

Visual quality evaluation of urban commercial streetscape for the development of landscape visual planning system in provincial street corridors in Malang, Indonesia

NASA Astrophysics Data System (ADS)

Santosa, H.; Ernawati, J.; Wulandari, L. D.

2018-03-01

The visual aesthetic experience in urban spaces is important in establishing a comfortable and satisfying experience for the community. The embodiment of a good visual image of urban space will encourage the emergence of positive perceptions and meanings stimulating the community to produce a good reaction to its urban space. Moreover, to establish a Good Governance in urban planning and design, it is necessary to boost and promote a community participation in the process of controlling the visual quality of urban space through the visual quality evaluation on urban street corridors. This study is an early stage as part of the development of ‘Landscape Visual Planning System’ on the commercial street corridor in Malang. Accordingly, the research aims to evaluate the physical characteristics and the public preferences of the spatial and visual aspects in five provincial road corridors in Malang. This study employs a field survey methods, and an environmental aesthetics approach through semantic differential method. The result of the identification of physical characteristics and the assessment of public preferences on the spatial and visual aspects of the five provincial streets serve as the basis for constructing the 3d interactive simulation scenarios in the Landscape Visual Planning System.

The quality of mental health information commonly searched for on the Internet.

PubMed

Grohol, John M; Slimowicz, Joseph; Granda, Rebecca

2014-04-01

Previous research has reviewed the quality of online information related to specific mental disorders. Yet, no comprehensive study has been conducted on the overall quality of mental health information searched for online. This study examined the first 20 search results of two popular search engines-Google and Bing-for 11 common mental health terms. They were analyzed using the DISCERN instrument, an adaptation of the Depression Website Content Checklist (ADWCC), Flesch Reading Ease and Flesch-Kincaid Grade Level readability measures, HONCode badge display, and commercial status, resulting in an analysis of 440 web pages. Quality of Web site results varied based on type of disorder examined, with higher quality Web sites found for schizophrenia, bipolar disorder, and dysthymia, and lower quality ratings for phobia, anxiety, and panic disorder Web sites. Of the total Web sites analyzed, 67.5% had good or better quality content. Nearly one-third of the search results produced Web sites from three entities: WebMD, Wikipedia, and the Mayo Clinic. The mean Flesch Reading Ease score was 41.21, and the mean Flesch-Kincaid Grade Level score was 11.68. The presence of the HONCode badge and noncommercial status was found to have a small correlation with Web site quality, and Web sites displaying the HONCode badge and commercial sites had lower readability scores. Popular search engines appear to offer generally reliable results pointing to mostly good or better quality mental health Web sites. However, additional work is needed to make these sites more readable.

29 CFR 779.108 - Goods produced for commerce.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

29 CFR 779.108 - Goods produced for commerce.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

29 CFR 779.108 - Goods produced for commerce.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

29 CFR 779.108 - Goods produced for commerce.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

29 CFR 779.108 - Goods produced for commerce.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled or...

Comparison of Acid Titration, Conductivity, Flame Photometry, ICP-MS, and Accelerated Lamellae Formation Techniques in Determining Glass Vial Quality.

PubMed

Fujimori, Kiyoshi; Lee, Hans; Sloey, Christopher; Ricci, Margaret S; Wen, Zai-Qing; Phillips, Joseph; Nashed-Samuel, Yasser

2016-01-01

Certain types of glass vials used as primary containers for liquid formulations of biopharmaceutical drug products have been observed with delamination that produced small glass like flakes termed lamellae under certain conditions during storage. The cause of this delamination is in part related to the glass surface defects, which renders the vials susceptible to flaking, and lamellae are formed during the high-temperature melting and annealing used for vial fabrication and shaping. The current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. Four alternative techniques with improved throughput, convenience, and/or comprehension were examined by subjecting seven lots of vials to analysis by all techniques. The first three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the same sample pools as acid titration. All three showed good correlation with alkalinity: conductivity (R(2) = 0.9951), flame photometry sodium (R(2) = 0.9895), and several elements by inductively coupled plasma mass spectrometry [(sodium (R(2) = 0.9869), boron (R(2) = 0.9796), silicon (R(2) = 0.9426), total (R(2) = 0.9639)]. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and then inspected those vials visually for lamellae. The visual inspection results without the lot with different processing condition correlated well with alkalinity (R(2) = 0.9474). Due to vial processing differences affecting alkalinity measurements and delamination propensity differently, the ratio of silicon and sodium measurements from inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality and vial propensity for lamellae formation. The other techniques of conductivity, flame photometry, and accelerated lamellae formation condition may still be suitable for routine screening of vial lots produced under consistent processes. Recently, delamination that produced small glass like flakes termed lamellae has been observed in glass vials that are commonly used as primary containers for pharmaceutical drug products under certain conditions during storage. The main cause of these lamellae was the quality of the glass itself related to the manufacturing process. Current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. As alternative to the European Pharmacopoeia method, four other techniques were assessed. Three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the vial extract pool as acid titration to quantify quality, and they demonstrated good correlation with original alkalinity. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and the vials were then inspected visually for lamellae. The accelerated lamellae formation technique also showed good correlation with alkalinity. Of the new four techniques, inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality even with differences in processing between vial lots. Other three techniques were still suitable for routine screening of vial lots produced under consistent processes. © PDA, Inc. 2016.

British Thoracic Society quality standards for home oxygen use in adults

PubMed Central

Suntharalingam, Jay; Wilkinson, Tom; Annandale, Joseph; Davey, Claire; Fielding, Rhea; Freeman, Daryl; Gibbons, Michael; Hardinge, Maxine; Hippolyte, Sabrine; Knowles, Vikki; Lee, Cassandra; MacNee, William; Pollington, Jacqueline; Vora, Vandana; Watts, Trefor; Wijesinghe, Meme

2017-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for home oxygen provision in the UK, together with measurable markers of good practice. Quality statements are based on the British Thoracic Society (BTS) Guideline for Home Oxygen Use in Adults. Methods Development of BTS Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 10 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for home oxygen use, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for home oxygen use in adults form a key part of the range of supporting materials that the society produces to assist in the dissemination and implementation of a guideline’s recommendations. PMID:29018527

Irrigation water quality and the benefits of implementing good agricultural practices during tomato (Lycopersicum esculentum) production.

PubMed

Estrada-Acosta, M; Jiménez, M; Chaidez, C; León-Félix, J; Castro-Del Campo, N

2014-07-01

The implementation of good agricultural practices (GAP) from irrigation water to the tomato packaging process enhances the safety of fresh produce and its value throughout the food chain. The aim of the present study was to show that fresh produce farms that apply and enforce GAP could reduce the presence of Salmonella in finished produce. Samples were collected biweekly from six packing houses from the central region of Sinaloa, México, for the isolation of Salmonella spp by the ISO 6579:2002 method, and the isolated strains were serotyped and genotyped by the Kauffmman-White scheme and pulsed field gel electrophoresis (PFGE), respectively. Salmonella strains were detected in 13 (36.1 %) irrigation water samples, while only two tomato samples were positive (5.5 %). Eight different serotypes were identified in irrigation water, and Salmonella Oranienburg (34 %) was the most prevalent; however, only Salmonella Agona and Salmonella Weltevreden were present on tomatoes. Salmonella Oranienburg was the most widely dispersed and variable serotype, with 10 different PFGE profiles. Salmonella Weltevreden was isolated from both types of samples, albeit with distinct genetic profiles, implying that the sources of contamination differ. These results confirm the utility of implementing good agricultural practices to reduce Salmonella contamination in irrigation water and the packaging process.

Using dental care resources optimally: quality-efficiency trade-offs in a competitive private market.

PubMed

Prasad, Banuru Muralidhara; Varatharajan, D

2011-01-01

Modern lifestyle changes led to increased dental care needs in India. Consequently, there has been a sharp rise in dentist numbers. Karnataka state alone produces 2,500 dentists annually, who are engaged in the non-government sector owing to inadequate public sector opportunities. This article aims to assess Karnataka private dental clinic quality and efficiency. Dentists were interviewed using a close-ended, structured interview schedule and their clinics were assessed using a checklist adopted from guidelines for providing machinery and equipment under the National Oral Health Care Programme (NOHCP). Dental "hotel" and clinical quality were scored based on this checklist. Clinical quality was "excellent" in 12 per cent of clinics and poor in 49 per cent. Clinics with better infrastructure charged higher price (p < 0.05). Multi-chair clinics charging fixed rates were high (81 per cent). According to 59.5 per cent of dentists, competition did not improve quality while 27 per cent felt that competition increased price, not quality. About 30.9 per cent of the poor quality clinics, 41 per cent average quality clinics and 26 per cent good quality clinics were technically efficient. The multi chair clinics offered better quality at higher prices and single chair clinics provided poorer quality at lower prices. In other words, they had a sub-optimal price-quality mix. Therefore, there is a need to regulate price and quality in all clinics to arrive at an optimal price-quality mix so that clients are not overburdened financially even while receiving good quality dental care. The article advocates that resources are used optimally as a way to achieve value for money and to achieve break-even points thereby providing quality care in a competitive market. Factors that influence dental practitioner behaviour are evaluated.

Feathering effect detection and artifact agglomeration index-based video deinterlacing technique

NASA Astrophysics Data System (ADS)

Martins, André Luis; Rodrigues, Evandro Luis Linhari; de Paiva, Maria Stela Veludo

2018-03-01

Several video deinterlacing techniques have been developed, and each one presents a better performance in certain conditions. Occasionally, even the most modern deinterlacing techniques create frames with worse quality than primitive deinterlacing processes. This paper validates that the final image quality can be improved by combining different types of deinterlacing techniques. The proposed strategy is able to select between two types of deinterlaced frames and, if necessary, make the local correction of the defects. This decision is based on an artifact agglomeration index obtained from a feathering effect detection map. Starting from a deinterlaced frame produced by the "interfield average" method, the defective areas are identified, and, if deemed appropriate, these areas are replaced by pixels generated through the "edge-based line average" method. Test results have proven that the proposed technique is able to produce video frames with higher quality than applying a single deinterlacing technique through getting what is good from intra- and interfield methods.

Acid-base accounting to predict post-mining drainage quality on surface mines.

PubMed

Skousen, J; Simmons, J; McDonald, L M; Ziemkiewicz, P

2002-01-01

Acid-base accounting (ABA) is an analytical procedure that provides values to help assess the acid-producing and acid-neutralizing potential of overburden rocks prior to coal mining and other large-scale excavations. This procedure was developed by West Virginia University scientists during the 1960s. After the passage of laws requiring an assessment of surface mining on water quality, ABA became a preferred method to predict post-mining water quality, and permitting decisions for surface mines are largely based on the values determined by ABA. To predict the post-mining water quality, the amount of acid-producing rock is compared with the amount of acid-neutralizing rock, and a prediction of the water quality at the site (whether acid or alkaline) is obtained. We gathered geologic and geographic data for 56 mined sites in West Virginia, which allowed us to estimate total overburden amounts, and values were determined for maximum potential acidity (MPA), neutralization potential (NP), net neutralization potential (NNP), and NP to MPA ratios for each site based on ABA. These values were correlated to post-mining water quality from springs or seeps on the mined property. Overburden mass was determined by three methods, with the method used by Pennsylvania researchers showing the most accurate results for overburden mass. A poor relationship existed between MPA and post-mining water quality, NP was intermediate, and NNP and the NP to MPA ratio showed the best prediction accuracy. In this study, NNP and the NP to MPA ratio gave identical water quality prediction results. Therefore, with NP to MPA ratios, values were separated into categories: <1 should produce acid drainage, between 1 and 2 can produce either acid or alkaline water conditions, and >2 should produce alkaline water. On our 56 surface mined sites, NP to MPA ratios varied from 0.1 to 31, and six sites (11%) did not fit the expected pattern using this category approach. Two sites with ratios <1 did not produce acid drainage as predicted (the drainage was neutral), and four sites with a ratio >2 produced acid drainage when they should not have. These latter four sites were either mined very slowly, had nonrepresentative ABA data, received water from an adjacent underground mine, or had a surface mining practice that degraded the water. In general, an NP to MPA ratio of <1 produced mostly acid drainage sites, between 1 and 2 produced mostly alkaline drainage sites, while NP to MPA ratios >2 produced alkaline drainage with a few exceptions. Using these values, ABA is a good tool to assess overburden quality before surface mining and to predict post-mining drainage quality after mining. The interpretation from ABA values was correct in 50 out of 52 cases (96%), excluding the four anomalous sites, which had acid water for reasons other than overburden quality.

Interaction of sleep quality and sleep duration on impaired fasting glucose: a population-based cross-sectional survey in China.

PubMed

Lou, Peian; Chen, Peipei; Zhang, Lei; Zhang, Pan; Chang, Guiqiu; Zhang, Ning; Li, Ting; Qiao, Cheng

2014-03-13

To explore the interactions of sleep quality and sleep duration and their effects on impaired fasting glucose (IFG) in Chinese adults. Cross-sectional survey. Community-based investigation in Xuzhou, China. 15 145 Chinese men and women aged 18-75 years old who fulfilled the inclusion criteria. The Pittsburgh Sleep Quality Index was used to produce sleep quality categories of good, common and poor. Fasting blood glucose levels were assessed for IFG. Sleep duration was measured by average hours of sleep per night, with categories of <6, 6-8 and >8 h. The products of sleep and family history of diabetes, obesity and age were added to the logistic regression model to evaluate the addictive interaction and relative excess risk of interaction (RERI) on IFG. The attributable proportion (AP) of the interaction and the synergy index (S) were applied to evaluate the additive interaction of two factors. Bootstrap measures were used to calculate 95% CI of RERI, AP and S. The prevalence of IFG was greatest in those with poor sleep quality and short sleep duration (OR 6.37, 95% CI 4.66 to 8.67; p<0.001) compared with those who had good sleep quality and 6-8 h sleep duration, after adjusting for confounders. After adjusting for potential confounders RERI, AP and S values (and their 95% CI) were 1.69 (0.31 to 3.76), 0.42 (0.15 to 0.61) and 2.85 (2.14 to 3.92), respectively, for the interaction between poor sleep quality and short sleep duration, and 0.78 (0.12 to 1.43), 0.61 (0.26 to 0.87) and -65 (-0.94 to -0.27) for the interaction between good sleep quality and long sleep duration. The results suggest that there are additive interactions between poor sleep quality and short sleep duration.

Automatic hot wire GTA welding of pipe offers speed and increased deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sykes, I.; Digiacomo, J.

1995-07-01

Heavy-wall pipe welding for the power and petrochemical industry must meet code requirements. Contractors strive to meet these requirements in the most productive way possible. The challenge put to orbital welding equipment manufacturers is to produce pipe welding equipment that cost-effectively produces code-quality welds. Orbital welding equipment using the GTA process has long produced outstanding quality results but has lacked the deposition rate to compete cost effectively with other manual and semiautomatic processes such as SMAW, FCAW and GMAW. In recent years, significant progress has been made with the use of narrow-groove weld joint designs to reduce weld joint volumemore » and improve welding times. Astro Arc Polysoude, an orbital welding equipment manufacturer based in Sun Valley, Calif., and Nantes, France, has combined the hot wire GTAW process with orbital welding equipment using a narrow-groove weld joint design. Field test results show this process and procedure is a good alternative for many heavy-wall-pipe welding applications.« less

Growth and properties of amorphous silicon films grown using pulsed-flow reactive plasma beam epitaxy

NASA Technical Reports Server (NTRS)

Dalal, Vikram L.; Knox, Ralph; Kandalaft, Nabeeh; Baldwin, Greg

1991-01-01

The growth and properties of a-Si:H films grown using a novel deposition technique, reactive plasma beam epitaxy, are discussed. In this technique, a remote H plasma produced in a microwave-ECR reactor is used to grow a-Si:H films at low pressures. The H ions react with SiH4 introduced near the substrate to produce the film. The flow of SiH4 is pulsed on or off, thereby achieving in-situ annealing of the film during growth by H ions and radicals. The films produced by this technique appear to have good electronic quality, and are more stable than the standard glow discharge films.

Improvement of Fermented Fish Flour Quality Using Essential Oil Extracted From Fresh Leaves of Pimenta racemosa (Mill.) J. W. Moore.

PubMed

Adjou, Euloge S; Dègnon, René G; Dahouenon-Ahoussi, Edwige; Soumanou, Mohamed M; Sohounhloue, Dominique C K

2017-08-01

The aim of this study was to evaluate the efficacy of the essential oil extracted from fresh leaves of Pimenta racemosa in the improvement of fermented fish flour producing technology. Essential oil of Pimenta racemosa was extracted by hydrodistillation and its chemical composition was determined by GC and GC/MS. Different types of fermented fish flours from Lesser African Threadfin (Galeoides decadactylus) were produced by the modification of the traditional processing technology and the introduction of a step of essential oil adjunction during the process. Three different essential oil concentrations (0.5, 1.0 and 2.0 μL g -1 ) were investigated. Physicochemical, microbiological and nutritional analyzes were performed in order to evaluate the quality of the fermented fish flour produced. Results obtained revealed that the essential oil of Pimenta racemosa investigated has a chemical composition characterized by the presence of myrcene (25.1%), chavicol (7.5%) and eugenol (51.1%). Fermented fish flour produced have a good nutritional potential. However, on the microbiological level, only samples produced by adjunction of essential oil have a low level of microbial contamination, with an absence of pathogenic microorganisms.

Radiation-Hardened Wafer Scale Integration

DTIC Science & Technology

1989-10-25

unlimited. LEXINGTON MASSACHUSETTS EXECUTIVE SUMMARY A focal plane processor (FPP) for a large array of LWIR photodetectors on a space platform must...It seems certain that large. scanning LWIR arrays will once again be of interest in the future, though their specifications will differ from those... nonuniformity and defects in the ZMR material, but films of good quality produced by this technique are now available commercially from Kopin Corporation. Such

Attack by Pyemotes johnmoseri (Acari:Pyemotidae) on Hypoborus ficus (Coleoptera:Scolytidae) in fig trees in Turkey

Treesearch

T. Aksit; I. Cakmak; J. Moser

2007-01-01

The Aegean Region of Turkey is one of the largest dried fig producers in the world. A Turkish cultivar sarilop (Ficus carica cv. Calimyrna L.) possesses good qualities for drying process, and has been grown extensively for many years in Turkey. Hypoborus ficus is the most common xylophagous insect attacking fig trees in Aydin (Aks¸...

Aerial spraying of low-grade hardwood stands with 2,4,5-T in West Virginia

Treesearch

George W. Wendel

1966-01-01

Aerial application of herbicides to poor hardwood stands shows promise of being an effective aid in converting stands of low-grade hardwoods to conifers in West Virginia. Many of the sites now occupied by low-grade hardwoods are incapable of producing quality hardwoods - even under good management - and are generally much better suited to certain conifers, particularly...

Multi-parameter measurements using optical fibre long period gratings for indoor air quality monitoring

NASA Astrophysics Data System (ADS)

Hromadka, J.; Korposh, S.; Partridge, M. C.; James, S.; Davis, F.; Crump, D.; Lee, S.-W.; Tatam, R. P.

2017-04-01

An array of three long period gratings (LPGs) fabricated in a single optical fibre and multiplexed in the wavelength domain was used to measure simultaneously temperature, relative humidity (RH) and volatile organic compounds (VOCs). Each LPG sensor was designed to optimize its response to a desired measurand. The LPGs were fabricated with periods such that they operated at or near the phase matching turning point. The sensors were calibrated in the laboratory and the simultaneous measurement of the key indoor air quality parameters was undertaken in laboratory and office environments. It was demonstrated successfully that the data produced by the LPG sensor array under real conditions was in a good agreement with that produced by commercially available sensors. Further, the potential application of fibre optic sensors for VOCs detection at high levels has been demonstrated.

British Thoracic Society quality standards for the investigation and management of pulmonary nodules.

PubMed

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations.

British Thoracic Society quality standards for the investigation and management of pulmonary nodules

PubMed Central

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations. PMID:29682290

A Modified Protocol for High-Quality RNA Extraction from Oleoresin-Producing Adult Pines.

PubMed

de Lima, Júlio César; Füller, Thanise Nogueira; de Costa, Fernanda; Rodrigues-Corrêa, Kelly C S; Fett-Neto, Arthur G

2016-01-01

RNA extraction resulting in good yields and quality is a fundamental step for the analyses of transcriptomes through high-throughput sequencing technologies, microarray, and also northern blots, RT-PCR, and RTqPCR. Even though many specific protocols designed for plants with high content of secondary metabolites have been developed, these are often expensive, time consuming, and not suitable for a wide range of tissues. Here we present a modification of the method previously described using the commercially available Concert™ Plant RNA Reagent (Invitrogen) buffer for field-grown adult pine trees with high oleoresin content.

Direct reduction processes for titanium oxide in molten salt

NASA Astrophysics Data System (ADS)

Suzuki, Ryosuke O.

2007-02-01

Molten salt electrolysis using CaCl2 is employed to produce pure titanium and its alloys directly from TiO2 and a mixture of elemental oxides, respectively, as an alternate to the Kroll process. This is because CaO, which is a reduction by-product, is highly soluble in CaCl2. Good-quality titanium containing only a small amount of residual oxygen has been successfully produced and scaled to industrial levels. Thermochemical and electrochemical bases are reviewed to optimize the process conditions. Several processes using molten salt are being examined for future progress in titanium processing.

High-efficiency holograms fixed in lithium niobate after recording using a digital fringe stabilization system.

PubMed

Arizmendi, Luis; Ambite, Emilio J

2012-02-20

We used a digital feedback control loop system to produce reproducible fixed volume transmission holograms of high diffraction efficiency. Different strategies were investigated to obtain holograms of good quality and the highest refractive index modulation depth. Using this control system, we were able to record holograms with stationary fringes. Additionally to using the stationary fringe recording, a double recording-fixing schedule resulted in being the most appropriate one to produce reproducible holograms of better characteristics. This strategy is discussed and compared with other already established ones. © 2012 Optical Society of America

Mechanisms and kinetics of cellulose fermentation for protein production

NASA Technical Reports Server (NTRS)

Dunlap, C. A.

1971-01-01

The development of a process (and ancillary processing and analytical techniques) to produce bacterial single-cell protein of good nutritional quality from waste cellulose is discussed. A fermentation pilot plant and laboratory were developed and have been in operation for about two years. Single-cell protein (SCP) can be produced from sugarcane bagasse--a typical agricultural cellulosic waste. The optimization and understanding of this process and its controlling variables are examined. Both batch and continuous fermentation runs have been made under controlled conditions in the 535 liter pilot plant vessel and in the laboratory 14-liter fermenters.

A super resolution framework for low resolution document image OCR

NASA Astrophysics Data System (ADS)

Ma, Di; Agam, Gady

2013-01-01

Optical character recognition is widely used for converting document images into digital media. Existing OCR algorithms and tools produce good results from high resolution, good quality, document images. In this paper, we propose a machine learning based super resolution framework for low resolution document image OCR. Two main techniques are used in our proposed approach: a document page segmentation algorithm and a modified K-means clustering algorithm. Using this approach, by exploiting coherence in the document, we reconstruct from a low resolution document image a better resolution image and improve OCR results. Experimental results show substantial gain in low resolution documents such as the ones captured from video.

7 CFR 51.485 - Good internal quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Good internal quality. 51.485 Section 51.485... STANDARDS) United States Standards for Grades of Cantaloups 1 Definitions § 51.485 Good internal quality. Good internal quality means that the combined juice from the edible portion of a sample of cantaloups...

Silage review: Unique challenges of silages made in hot and cold regions.

PubMed

Bernardes, T F; Daniel, J L P; Adesogan, A T; McAllister, T A; Drouin, P; Nussio, L G; Huhtanen, P; Tremblay, G F; Bélanger, G; Cai, Y

2018-05-01

Silage making can be conveniently divided into field, ensiling, storage, and feed-out phases. In all of these stages, controllable and uncontrollable components can affect silage quality. For instance, silages produced in hot or cold regions are strongly influenced by uncontrollable climate-related factors. In hot regions, crops for silage are influenced by (1) high temperatures negatively affecting corn yield (whole-crop and grain) and nutritive value, (2) butyric and alcoholic fermentations in warm-season grasses (Panicum, Brachiaria, and Pennisetum genera) and sugarcane, respectively, and (3) accelerated aerobic deterioration of silages. Ensiling expertise and economic factors that limit mechanization also impair silage production and utilization in hot environments. In cold regions, a short and cool growing season often limits the use of crops sensitive to cool temperature, such as corn. The fermentation triggered by epiphytic and inoculated microorganisms can also be functionally impaired at lower temperature. Although the use of silage inoculants has increased in Northern Europe, acid-based additives are still a good option in difficult weather conditions to ensure good fermentation quality, nutritive value, and high intake potential of silages. Acid-based additives have enhanced the quality of round bale silage, which has become a common method of forage preservation in Northern Europe. Although all abiotic factors can affect silage quality, the ambient temperature is a factor that influences all stages of silage making from production in the field to utilization at the feed bunk. This review identifies challenges and obstacles to producing silages under hot and cold conditions and discusses strategies for addressing these challenges. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Perceptual effects of dialectal and prosodic variation in vowels

NASA Astrophysics Data System (ADS)

Fox, Robert Allen; Jacewicz, Ewa; Hatcher, Kristin; Salmons, Joseph

2005-09-01

As was reported earlier [Fox et al., J. Acoust. Soc. Am. 114, 2396 (2003)], certain vowels in the Ohio and Wisconsin dialects of American English are shifting in different directions. In addition, we have found that the spectral characteristics of these vowels (e.g., duration and formant frequencies) changed systematically under varying degrees of prosodic prominence, with somewhat different changes occurring within each dialect. The question addressed in the current study is whether naive listeners from these two dialects are sensitive to both the dialect variations and to the prosodically induced spectral differences. Listeners from Ohio and Wisconsin listened to the stimulus tokens [beIt] and [bɛt] produced in each of three prosodic contexts (representing three different levels of prominence). These words were produced by speakers from Ohio or from Wisconsin (none of the listeners were also speakers). Listeners identified the stimulus tokens in terms of vowel quality and indicated whether it was a good, fair, or poor exemplar of that phonetic category. Results showed that both phonetic quality decisions and goodness ratings were systematically and significantly affected by speaker dialect, listener dialect, and prosodic context. Implications of source and nature of ongoing vowel changes in these two dialects will be discussed. [Work partially supported by NIDCD R03 DC005560-01.

Evaluation of the quality of generic polymethylmethacrylate intraocular lenses marketed in India.

PubMed

Combe, R; Watkins, R; Brian, G

2001-04-01

To determine the quality of single-piece, allpolymethylmethacrylate (PMMA) Intraocular lenses (IOLs) from eght generic manufacturers marketing their product in India. This assessment of quality was made with respect to compliance with internationa standards for the manufacture of IOLs, specifically those parameters most likely to affect patient postoperat ve visual acuity and the long-term biocompatibility of the implanted lens. Ten IOLs from each of eight manufacturers were purchased randomly from commercial retail outlets in India. Each IOL, in a masked fashion, had its physical dimensions, optical performance and cosmetic appearance assessed, using the methods prescribed in ISO 11979-2 and 11979-3. Validation of manufacturing process controls were determined by statistical process contro techniques. Four IOLs from each manufacturer were also tested for the presence of unpolymerized PMMA using gas chromatography. Only lenses from two IOL manufacturers complied with the optical and mechanical standards. All other manufacturers' lenses failed one or more of these tests. Intraocular lenses from only two producers met with surface quality and bulk homogeneity standards. All others exhibited defects such as surface contamination and scratches, poor polishing, and chipped or rough positioning holes. Lenses from two producers exhibited high levels of methylmethacrylate monomer (MMA). Non-clinical grade PMMA starting material may have been used in the manufacture of IOLs by some producers. Critical manufacturing defects occurred in the IOLs from five of the eight producers tested. Only one manufacturer's IOLs met all specifications, and on statistical analysis demonstrated good manufacturing process contro with respect to the properties tested. With the widespread acceptance of IOL implantation in developing countries, such as India, it is essential that in the rush to make this the norm, the quality of implants used not be overlooked.

Culture shock: Improving software quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

de Jong, K.; Trauth, S.L.

1988-01-01

The concept of software quality can represent a significant shock to an individual who has been developing software for many years and who believes he or she has been doing a high quality job. The very idea that software includes lines of code and associated documentation is foreign and difficult to grasp, at best. Implementation of a software quality program hinges on the concept that software is a product whose quality needs improving. When this idea is introduced into a technical community that is largely ''self-taught'' and has been producing ''good'' software for some time, a fundamental understanding of themore » concepts associated with software is often weak. Software developers can react as if to say, ''What are you talking about. What do you mean I'm not doing a good job. I haven't gotten any complaints about my code yetexclamation'' Coupling such surprise and resentment with the shock that software really is a product and software quality concepts do exist, can fuel the volatility of these emotions. In this paper, we demonstrate that the concept of software quality can indeed pose a culture shock to developers. We also show that a ''typical'' quality assurance approach, that of imposing a standard and providing inspectors and auditors to assure its adherence, contributes to this shock and detracts from the very goal the approach should achieve. We offer an alternative, adopted through experience, to implement a software quality program: cooperative assistance. We show how cooperation, education, consultation and friendly assistance can overcome this culture shock. 3 refs.« less

Development of a wheat-Aegilops searsii substitution line with positively affecting Chinese steamed bread quality

PubMed Central

Du, Xuye; Ma, Xin; Min, Jingzhi; Zhang, Xiaocun; Jia, Zhenzhen

2018-01-01

A wheat-Aegilops searsii substitution line GL1402, in which chromosome 1B was substituted with 1Ss from Ae. searsii, was developed and detected using SDS-PAGE and GISH. The SDS-PAGE analysis showed that the HMW-GS encoded by the Glu-B1 loci of Chinese Spring was replaced by the HMW-GS encoded by the Glu-1Ss loci of Ae. searsii. Glutenin macropolymer (GMP) investigation showed that GL1402 had a much higher GMP content than Chinese Spring did. A dough quality comparison of GL1402 and Chinese Spring indicated that GL1402 showed a significantly higher protein content and middle peak time (MPT), and a smaller right peak slope (RPS). Quality tests of Chinese steamed bread (CSB) showed that the GL1402 also produced good steamed bread quality. These results suggested that the substitution line is a valuable breeding material for improving the wheat processing quality.

Color extended visual cryptography using error diffusion.

PubMed

Kang, InKoo; Arce, Gonzalo R; Lee, Heung-Kyu

2011-01-01

Color visual cryptography (VC) encrypts a color secret message into n color halftone image shares. Previous methods in the literature show good results for black and white or gray scale VC schemes, however, they are not sufficient to be applied directly to color shares due to different color structures. Some methods for color visual cryptography are not satisfactory in terms of producing either meaningless shares or meaningful shares with low visual quality, leading to suspicion of encryption. This paper introduces the concept of visual information pixel (VIP) synchronization and error diffusion to attain a color visual cryptography encryption method that produces meaningful color shares with high visual quality. VIP synchronization retains the positions of pixels carrying visual information of original images throughout the color channels and error diffusion generates shares pleasant to human eyes. Comparisons with previous approaches show the superior performance of the new method.

Thermal Exfoliation of Natural Cellulosic Material for Graphene Synthesis

NASA Astrophysics Data System (ADS)

Ray, Ajoy Kumar; Chatterjee, Somenath; Singh, Jitendra Kumar; Bapari, Himangshu

2015-01-01

Hibiscus flower petals have been used as a cheap natural resource precursor for cost-effective synthesis of high quality graphene by thermal exfoliation process. In order to compare the quality of graphene obtained from the flower petals directly with the flower petals pretreated with nickel(II) chloride, Raman spectroscopic technique has been used as the structural probe. The role of temperature and the effect of nickel on thermal exfoliation process have been examined. It has been observed that graphene obtained via nickel incorporation is of better quality because NI2+ ions that get dispersed in the layered-structured cellulose at elevated temperatures get reduced to the metallic state, which in turn push the graphitic layers during thermal exfoliation to produce good quality graphene. In contrast, no such driving force is present in cellulose and hemi-cellulose of flower petals that contain lignin.

Integrating cobenefits produced with water quality BMPs into credits markets: Conceptualization and experimental illustration for EPRI's Ohio River Basin Trading

NASA Astrophysics Data System (ADS)

Liu, Pengfei; Swallow, Stephen K.

2016-05-01

This paper develops a method that incorporates the public value for environmental cobenefits when a conservation buyer can purchase water quality credits based on nonmarket valuation results. We demonstrate this approach through an experiment with adult students in a classroom laboratory environment. Our application contributes to the study of individual preference and willingness to pay for cobenefits associated with the production of water quality credits in relation to the Ohio River Basin Trading Project. We use three different methods to elicit individuals' willingness to pay (WTP), including (1) a hypothetical referendum, (2) a real referendum lacking incentive compatibility, and (3) a real choice with incentive compatibility. Methodologically, our WTP estimates suggest individuals are more sensitive to the cost changes and reveal the lowest value in the real choice with incentive compatibility. Practically, we find individuals value certain cobenefits and credits as public goods. Incorporating public value toward cobenefits may improve the overall efficiency of a water quality trading market. Based on our specification of a planner's welfare function, results suggest a substantial welfare improvement after identifying an optimal allocation of a buyer's budget across credits derived from agricultural management practices producing different portfolios of cobenefits.

Modelling the distribution of chickens, ducks, and geese in China

USGS Publications Warehouse

Prosser, Diann J.; Wu, Junxi; Ellis, Erie C.; Gale, Fred; Van Boeckel, Thomas P.; Wint, William; Robinson, Tim; Xiao, Xiangming; Gilbert, Marius

2011-01-01

Global concerns over the emergence of zoonotic pandemics emphasize the need for high-resolution population distribution mapping and spatial modelling. Ongoing efforts to model disease risk in China have been hindered by a lack of available species level distribution maps for poultry. The goal of this study was to develop 1 km resolution population density models for China's chickens, ducks, and geese. We used an information theoretic approach to predict poultry densities based on statistical relationships between poultry census data and high-resolution agro-ecological predictor variables. Model predictions were validated by comparing goodness of fit measures (root mean square error and correlation coefficient) for observed and predicted values for 1/4 of the sample data which were not used for model training. Final output included mean and coefficient of variation maps for each species. We tested the quality of models produced using three predictor datasets and 4 regional stratification methods. For predictor variables, a combination of traditional predictors for livestock mapping and land use predictors produced the best goodness of fit scores. Comparison of regional stratifications indicated that for chickens and ducks, a stratification based on livestock production systems produced the best results; for geese, an agro-ecological stratification produced best results. However, for all species, each method of regional stratification produced significantly better goodness of fit scores than the global model. Here we provide descriptive methods, analytical comparisons, and model output for China's first high resolution, species level poultry distribution maps. Output will be made available to the scientific and public community for use in a wide range of applications from epidemiological studies to livestock policy and management initiatives.

Modelling the distribution of chickens, ducks, and geese in China

PubMed Central

Prosser, Diann J.; Wu, Junxi; Ellis, Erle C.; Gale, Fred; Van Boeckel, Thomas P.; Wint, William; Robinson, Tim; Xiao, Xiangming; Gilbert, Marius

2011-01-01

Global concerns over the emergence of zoonotic pandemics emphasize the need for high-resolution population distribution mapping and spatial modelling. Ongoing efforts to model disease risk in China have been hindered by a lack of available species level distribution maps for poultry. The goal of this study was to develop 1 km resolution population density models for China’s chickens, ducks, and geese. We used an information theoretic approach to predict poultry densities based on statistical relationships between poultry census data and high-resolution agro-ecological predictor variables. Model predictions were validated by comparing goodness of fit measures (root mean square error and correlation coefficient) for observed and predicted values for ¼ of the sample data which was not used for model training. Final output included mean and coefficient of variation maps for each species. We tested the quality of models produced using three predictor datasets and 4 regional stratification methods. For predictor variables, a combination of traditional predictors for livestock mapping and land use predictors produced the best goodness of fit scores. Comparison of regional stratifications indicated that for chickens and ducks, a stratification based on livestock production systems produced the best results; for geese, an agro-ecological stratification produced best results. However, for all species, each method of regional stratification produced significantly better goodness of fit scores than the global model. Here we provide descriptive methods, analytical comparisons, and model output for China’s first high resolution, species level poultry distribution maps. Output will be made available to the scientific and public community for use in a wide range of applications from epidemiological studies to livestock policy and management initiatives. PMID:21765567

Phase-locking of annular-combination CO2 laser

NASA Astrophysics Data System (ADS)

Qi, Tingxiang; Chen, Mei; Zhang, Rongzhu; Xiao, Qianyi

2015-07-01

A new annular-combination resonator structure adopting the external-injection phase-locking technology is presented theoretically for that the beam quality of stable annular resonator is not satisfying. The phase-locking principle and feasibility are characterized by energy density of injection beam and coupling coefficient. Based on the diffraction theory, output mode of the resonator with phase-locking is deduced and simulated. Results also confirm that injection beam have a good control effect on output mode. The intensity distributions of output beam are studied briefly and indicate that this new resonator which is adaptable to annular gain media can produce high-power laser beam with high quality.

Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP

NASA Astrophysics Data System (ADS)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2018-05-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

Applicability of biotechnologically produced insect silks.

PubMed

Herold, Heike M; Scheibel, Thomas

2017-09-26

Silks are structural proteins produced by arthropods. Besides the well-known cocoon silk, which is produced by larvae of the silk moth Bombyx mori to undergo metamorphosis inside their silken shelter (and which is also used for textile production by men since millennia), numerous further less known silk-producing animals exist. The ability to produce silk evolved multiple independent times during evolution, and the fact that silk was subject to convergent evolution gave rise to an abundant natural diversity of silk proteins. Silks are used in air, under water, or like honey bee silk in the hydrophobic, waxen environment of the bee hive. The good mechanical properties of insect silk fibres together with their non-toxic, biocompatible, and biodegradable nature renders these materials appealing for both technical and biomedical applications. Although nature provides a great diversity of material properties, the variation in quality inherent in materials from natural sources together with low availability (except from silkworm silk) impeded the development of applications of silks. To overcome these two drawbacks, in recent years, recombinant silks gained more and more interest, as the biotechnological production of silk proteins allows for a scalable production at constant quality. This review summarises recent developments in recombinant silk production as well as technical procedures to process recombinant silk proteins into fibres, films, and hydrogels.

Effectiveness of Cooperative Learning Instructional Tools With Predict-Observe-Explain Strategy on the Topic of Cuboid and Cube Volume

NASA Astrophysics Data System (ADS)

Nurhuda; Lukito, A.; Masriyah

2018-01-01

This study aims to develop instructional tools and implement it to see the effectiveness. The method used in this research referred to Designing Effective Instruction. Experimental research with two-group pretest-posttest design method was conducted. The instructional tools have been developed is cooperative learning model with predict-observe-explain strategy on the topic of cuboid and cube volume which consist of lesson plans, POE tasks, and Tests. Instructional tools were of good quality by criteria of validity, practicality, and effectiveness. These instructional tools was very effective for teaching the volume of cuboid and cube. Cooperative instructional tool with predict-observe-explain (POE) strategy was good of quality because the teacher was easy to implement the steps of learning, students easy to understand the material and students’ learning outcomes completed classically. Learning by using this instructional tool was effective because learning activities were appropriate and students were very active. Students’ learning outcomes were completed classically and better than conventional learning. This study produced a good instructional tool and effectively used in learning. Therefore, these instructional tools can be used as an alternative to teach volume of cuboid and cube topics.

29 CFR 1620.5 - What goods are considered as “produced for commerce.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false What goods are considered as âproduced for commerce.â 1620... COMMISSION THE EQUAL PAY ACT § 1620.5 What goods are considered as “produced for commerce.” Goods (as defined in section 3(i) of the FLSA) are “produced for commerce” if they are “produced, manufactured, mined...

29 CFR 1620.5 - What goods are considered as “produced for commerce.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false What goods are considered as âproduced for commerce.â 1620... COMMISSION THE EQUAL PAY ACT § 1620.5 What goods are considered as “produced for commerce.” Goods (as defined in section 3(i) of the FLSA) are “produced for commerce” if they are “produced, manufactured, mined...

29 CFR 1620.5 - What goods are considered as “produced for commerce.”

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false What goods are considered as âproduced for commerce.â 1620... COMMISSION THE EQUAL PAY ACT § 1620.5 What goods are considered as “produced for commerce.” Goods (as defined in section 3(i) of the FLSA) are “produced for commerce” if they are “produced, manufactured, mined...

29 CFR 1620.5 - What goods are considered as “produced for commerce.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false What goods are considered as âproduced for commerce.â 1620... COMMISSION THE EQUAL PAY ACT § 1620.5 What goods are considered as “produced for commerce.” Goods (as defined in section 3(i) of the FLSA) are “produced for commerce” if they are “produced, manufactured, mined...

A novel discrete PSO algorithm for solving job shop scheduling problem to minimize makespan

NASA Astrophysics Data System (ADS)

Rameshkumar, K.; Rajendran, C.

2018-02-01

In this work, a discrete version of PSO algorithm is proposed to minimize the makespan of a job-shop. A novel schedule builder has been utilized to generate active schedules. The discrete PSO is tested using well known benchmark problems available in the literature. The solution produced by the proposed algorithms is compared with best known solution published in the literature and also compared with hybrid particle swarm algorithm and variable neighborhood search PSO algorithm. The solution construction methodology adopted in this study is found to be effective in producing good quality solutions for the various benchmark job-shop scheduling problems.

Relationship Between Time Consumption and Quality of Responses to Drug-related Queries: A Study From Seven Drug Information Centers in Scandinavia.

PubMed

Amundstuen Reppe, Linda; Lydersen, Stian; Schjøtt, Jan; Damkier, Per; Rolighed Christensen, Hanne; Peter Kampmann, Jens; Böttiger, Ylva; Spigset, Olav

2016-07-01

The aims of this study were to assess the quality of responses produced by drug information centers (DICs) in Scandinavia, and to study the association between time consumption processing queries and the quality of the responses. We posed six identical drug-related queries to seven DICs in Scandinavia, and the time consumption required for processing them was estimated. Clinical pharmacologists (internal experts) and general practitioners (external experts) reviewed responses individually. We used mixed model linear regression analyses to study the associations between time consumption on one hand and the summarized quality scores and the overall impression of the responses on the other hand. Both expert groups generally assessed the quality of the responses as "satisfactory" to "good." A few responses were criticized for being poorly synthesized and less relevant, of which none were quality-assured using co-signatures. For external experts, an increase in time consumption was statistically significantly associated with a decrease in common quality score (change in score, -0.20 per hour of work; 95% CI, -0.33 to -0.06; P = 0.004), and overall impression (change in score, -0.05 per hour of work; 95% CI, -0.08 to -0.01; P = 0.005). No such associations were found for the internal experts' assessment. To our knowledge, this is the first study of the association between time consumption and quality of responses to drug-related queries in DICs. The quality of responses were in general good, but time consumption and quality were only weakly associated in this setting. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

NASA Astrophysics Data System (ADS)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

Quality and cost assessment of a recombinant antibody fragment produced from mammalian, yeast and prokaryotic host cells: A case study prior to pharmaceutical development.

PubMed

Lebozec, Kristell; Jandrot-Perrus, Martine; Avenard, Gilles; Favre-Bulle, Olivier; Billiald, Philippe

2018-09-25

Monoclonal antibody fragments (Fab) are a promising class of therapeutic agents. Fabs are aglycosylated proteins and so many expression platforms have been developed including prokaryotic, yeast and mammalian cells. However, these platforms are not equivalent in terms of cell line development and culture time, product quality and possibly cost of production that greatly influence the success of a drug candidate's pharmaceutical development. This study is an assessment of the humanized Fab fragment ACT017 produced from two microorganisms (Escherichia coli and Pichia pastoris) and one mammalian cell host (CHO). Following low scale production and Protein L-affinity purification under generic conditions, physico-chemical and functional quality assessments were carried out prior to economic analysis of industrial scale production using a specialized software (Biosolve, Biopharm Services, UK). Results show higher titer production when using E. coli but associated with high heterogeneity of the protein content recovered in the supernatant. We also observed glycoforms of the Fab produced from P. pastoris, while Fab secreted from CHO was the most homogeneous despite a much longer culture time and slightly higher estimated cost of goods. This study may help inform future pharmaceutical development of this class of therapeutic proteins. Copyright © 2018 Elsevier B.V. All rights reserved.

Nutrition and Schizophrenia

PubMed Central

Hoffer, Abram

1975-01-01

Nutrition as a treatment component for schizophrenia is a novel concept. A brief introduction outlines the need for physicians to become nutritionally minded, since the processing of food has deteriorated its quality. The elements of good nutrition are described. There are several etiologies for the schizophrenia syndrome. It is suggested that these include Vitamin B-3 and B-6 dependency, mineral deficiency, particularly zinc, and cerebral reactions (termed allergy). The treatment based upon these ideas includes good nutrition (junk-free diet), megadoses of some vitamins, minerals, attention to certain foods which produce psychosis in a few; all in a judicious combination with standard psychiatric therapy. Such a program will improve the recovery rate over standard therapy alone. PMID:20469184

A molten salt process for producing neodymium and neodymium-iron alloys

NASA Astrophysics Data System (ADS)

Sharma, Ram A.; Seefurth, Randall N.

1989-12-01

The production of low-cost neodymium metal in a stirred tank reactor by the reduction of Nd2O3 with sodium in the presence of CaCl2-KCl-NaCl melts by the overall reaction Nd2O3+3CaCl2+6Na→2Nd+3CaO+6NaCl at ˜750 °C is described. The metal produced is recovered from the salt medium by dissolving it in a Nd-Zn or Nd-Fe alloy pool. In the case of Nd-Zn alloy pools, product yields (percentages of theoretical neodymium produced) in excess of 94 pct are obtained when using salt ratios, i.e., the amounts of salt per gram of neodymium produced, ≥3.5 and excess reductant ≥10 pct. The alloy produced is of high quality, and following vacuum distillation of the zinc, can be used in producing General Motors’ MAGNEQUENCH alloy for permanent magnets. In the case of Nd-Fe pools, the yield is also ˜95 pct with a salt ratio as low as 3.5. The yield is found to depend on the salt composition and salt ratio, and to decrease at salt ratios below 3.25. Stirrer position has little effect on yield, while increasing the temperature and placing fins in the reactor increase the yield. The Nd-Fe alloy produced is of as good quality as that produced using Ca reductant and is suitable for direct use in preparing the MAGNEQUENCH alloy.

Video quality of 3G videophones for telephone cardiopulmonary resuscitation.

PubMed

Tränkler, Uwe; Hagen, Oddvar; Horsch, Alexander

2008-01-01

We simulated a cardiopulmonary resuscitation (CPR) scene with a manikin and used two 3G videophones on the caller's side to transmit video to a laptop PC. Five observers (two doctors with experience in emergency medicine and three paramedics) evaluated the video. They judged whether the manikin was breathing and whether they would give advice for CPR; they also graded the confidence of their decision-making. Breathing was only visible from certain orientations of the videophones, at distances below 150 cm with good illumination and a still background. Since the phones produced a degradation in colours and shadows, detection of breathing mainly depended on moving contours. Low camera positioning produced better results than having the camera high up. Darkness, shaking of the camera and a moving background made detection of breathing almost impossible. The video from the two 3G videophones that were tested was of sufficient quality for telephone CPR provided that camera orientation, distance, illumination and background were carefully chosen. Thus it seems possible to use 3G videophones for emergency calls involving CPR. However, further studies on the required video quality in different scenarios are necessary.

Diagnostic value and cost-effectiveness of good quality digital images accompanying electronic referrals for suspected skin malignancies.

PubMed

Ng, Michael F Y; Stevenson, J Howard

2011-04-01

The aim of this study was to investigate the outcome and cost-effectiveness of good and poor quality photographs accompanying the electronic referrals for suspected skin malignancies. A retrospective study of 100 patients, divided into 2 groups, 50 with good quality photographs and 50 with poor quality photographs. Patients with no digital images, or who failed to attend, or patients with incomplete notes were excluded from the study. The treatment pathway, waiting times, and estimated cost between the 2 groups were compared. Good photographs were more likely to be treated at the 1-Stop Clinic (P = 0.05). Good images had a better positive predictive value than poor quality images (62.55% vs. 42.86%). Good quality images are more accurate than poor quality images in triaging of patients, and thus more effective in facilitating the treatment of malignant lesions timely. Good quality photographs allow a delayed appropriate treatment of benign lesions. This increases the safety for patients in a queue in a rationed health care system, and improves patient flow.

Feasibility of evaluating quality cancer care using registry data and electronic health records: a population-based study.

PubMed

Caldarella, Adele; Amunni, Gianni; Angiolini, Catia; Crocetti, Emanuele; Di Costanzo, Francesco; Di Leo, Angelo; Giusti, Francesco; Pegna, Andrea Lopes; Mantellini, Paola; Luzzatto, Lucio; Paci, Eugenio

2012-08-01

To evaluate the quality of patients care, a set of indicators of the standards of cancer care were defined. We developed a set of indicators to assess the implementation in daily practice of recommendation produced by a regional network (Istituto Toscano Tumori). This set was tested in a retrospective study in the resident population of the Tuscany Region; the regional health system is organized on 12 local health authorities which refer to three macro areas (Area Vasta). The study included incident colorectal, lung and breast cancer cases listed in 2004 for the Tuscan Cancer Registry, a population-based registry which collected tumor cases diagnosed in all residents in Tuscany. Electronic data from registry database were used to determine the compliance with each indicator for patients in 2004. To validate the results, an ad hoc clinical survey including the same geographical area for the year 2006 was performed. None. The proportion of patients who fulfilled each of the indicators. Our study showed the feasibility of the evaluation of the quality of cancer care using cancer registry population-based data and major computerized information systems. The estimation of the selected indicators confirmed a good homogeneity among areas, and globally revealed a good intraregional performance. Further work is needed to develop specific quality measures, particularly about structural data and to continually revise indicators of quality of care. Data from a cancer registry, however, can be useful to evaluate quality of cancer care.

Weldability of AA 5052 H32 aluminium alloy by TIG welding and FSW process - A comparative study

NASA Astrophysics Data System (ADS)

Shanavas, S.; Raja Dhas, J. Edwin

2017-10-01

Aluminium 5xxx series alloys are the strongest non-heat treatable aluminium alloy. Its application found in automotive components and body structures due to its good formability, good strength, high corrosion resistance, and weight savings. In the present work, the influence of Tungsten Inert Gas (TIG) welding parameters on the quality of weld on AA 5052 H32 aluminium alloy plates were analyzed and the mechanical characterization of the joint so produced was compared with Friction stir (FS) welded joint. The selected input variable parameters are welding current and inert gas flow rate. Other parameters such as welding speed and arc voltage were kept constant throughout the study, based on the response from several trial runs conducted. The quality of the weld is measured in terms of ultimate tensile strength. A double side V-butt joints were fabricated by double pass on one side to ensure maximum strength of TIG welded joints. Macro and microstructural examination were conducted for both welding process.

Interaction of sleep quality and sleep duration on impaired fasting glucose: a population-based cross-sectional survey in China

PubMed Central

Lou, Peian; Chen, Peipei; Zhang, Lei; Zhang, Pan; Chang, Guiqiu; Zhang, Ning; Li, Ting; Qiao, Cheng

2014-01-01

Objectives To explore the interactions of sleep quality and sleep duration and their effects on impaired fasting glucose (IFG) in Chinese adults. Design Cross-sectional survey. Setting Community-based investigation in Xuzhou, China. Participants 15 145 Chinese men and women aged 18–75 years old who fulfilled the inclusion criteria. Primary and secondary outcome measures The Pittsburgh Sleep Quality Index was used to produce sleep quality categories of good, common and poor. Fasting blood glucose levels were assessed for IFG. Sleep duration was measured by average hours of sleep per night, with categories of <6, 6–8 and >8 h. The products of sleep and family history of diabetes, obesity and age were added to the logistic regression model to evaluate the addictive interaction and relative excess risk of interaction (RERI) on IFG. The attributable proportion (AP) of the interaction and the synergy index (S) were applied to evaluate the additive interaction of two factors. Bootstrap measures were used to calculate 95% CI of RERI, AP and S. Results The prevalence of IFG was greatest in those with poor sleep quality and short sleep duration (OR 6.37, 95% CI 4.66 to 8.67; p<0.001) compared with those who had good sleep quality and 6–8 h sleep duration, after adjusting for confounders. After adjusting for potential confounders RERI, AP and S values (and their 95% CI) were 1.69 (0.31 to 3.76), 0.42 (0.15 to 0.61) and 2.85 (2.14 to 3.92), respectively, for the interaction between poor sleep quality and short sleep duration, and 0.78 (0.12 to 1.43), 0.61 (0.26 to 0.87) and −65 (−0.94 to −0.27) for the interaction between good sleep quality and long sleep duration. Conclusions The results suggest that there are additive interactions between poor sleep quality and short sleep duration. PMID:24625639

Quality and market chain of Aceh Cocoa Beans

NASA Astrophysics Data System (ADS)

Irfan; Sulaiman, I.; Ikhsan, CN; Faizun, N.

2018-05-01

After long-lasting conflict and tsunami on December 26, 2004, some international donors/NGOs supported Aceh on cocoa development. Aceh cocoa sector has experienced tremendous growth in Indonesia. This study aims to investigate quality and market chain of Aceh cocoa beans. The survey was conducted in Pidie District. A number of 21 farmers and 1 exporter were interviewed; the beans from farmer’s warehouses were analyzed and compared to Indonesia National Standard (INS). The result showed that the beans were generally produced from 6 Sub-Districts: Keumala, Titeue, Glumpang Tiga, Padang Tiji, and Tangse. They were not fermented; most were exported to the USA. Based on bean count, quality was mainly included in I/A and II/B. The main quality problem was high moisture content. Presumably, the beans were bought by wholesalers with lower price although not been sufficiently dried. Other quality parameters were good: no moldy bean and contaminant, very low insect damage/hollow-/germinated beans, and tiny broken beans (quality I)

Refrigerated fruit storage monitoring combining two different wireless sensing technologies: RFID and WSN.

PubMed

Badia-Melis, Ricardo; Ruiz-Garcia, Luis; Garcia-Hierro, Javier; Villalba, Jose I Robla

2015-02-26

Every day, millions of tons of temperature-sensitive goods are produced, transported, stored or distributed worldwide, thus making their temperature and humidity control essential. Quality control and monitoring of goods during the cold chain is an increasing concern for producers, suppliers, logistic decision makers and consumers. In this paper we present the results of a combination of RFID and WSN devices in a set of studies performed in three commercial wholesale chambers of 1848 m3 with different set points and products. Up to 90 semi-passive RFID temperature loggers were installed simultaneously together with seven motes, during one week in each chamber. 3D temperature mapping charts were obtained and also the psychrometric data model from ASABE was implemented for the calculation of enthalpy changes and the absolute water content of air. Thus thank to the feedback of data, between RFID and WSN it is possible to estimate energy consumption in the cold room, water loss from the products and detect any condensation over the stored commodities.

Refrigerated Fruit Storage Monitoring Combining Two Different Wireless Sensing Technologies: RFID and WSN

PubMed Central

Badia-Melis, Ricardo; Ruiz-Garcia, Luis; Garcia-Hierro, Javier; Villalba, Jose I. Robla

2015-01-01

Every day, millions of tons of temperature-sensitive goods are produced, transported, stored or distributed worldwide, thus making their temperature and humidity control essential. Quality control and monitoring of goods during the cold chain is an increasing concern for producers, suppliers, logistic decision makers and consumers. In this paper we present the results of a combination of RFID and WSN devices in a set of studies performed in three commercial wholesale chambers of 1848 m3 with different set points and products. Up to 90 semi-passive RFID temperature loggers were installed simultaneously together with seven motes, during one week in each chamber. 3D temperature mapping charts were obtained and also the psychrometric data model from ASABE was implemented for the calculation of enthalpy changes and the absolute water content of air. Thus thank to the feedback of data, between RFID and WSN it is possible to estimate energy consumption in the cold room, water loss from the products and detect any condensation over the stored commodities. PMID:25730482

Gibberellic acid (GA3) induced changes in proanthocyanidins and malt quality of two- and six-row husked barleys.

PubMed

Yadav, S K; Luthra, Y P; Sood, D R; Aggarwal, N K

2000-01-01

Analysis of husked barleys for proanthocyanidins and malt quality attributes has shown that not a single variety is free of proanthocyanidins. The proanthocyanidins in barley grains varied from 3.85 to 4.94 mg/g as catechin equivalent. The concentration of proanthocyanidins decreased, while total soluble sugars, reducing sugars, diastatic power and beta-amylase activity increased during maltings as well as with exogenous gibberellic acid (GA3) application. Alfa 93 (two-row) and RD2560 (six-row) varieties appeared to be superior for malting and brewing purposes on the basis of proanthocyanidins, total phenols, diastatic power and beta-amylase activity. It is suggested that exogenous application of GA3 at 15 ppm may be useful for producing good quality malt from barley grains.

Implementation of a quality assurance process for non-therapeutic infant male circumcision providers in North West England.

PubMed

Whittaker, P J; Gollins, H J; Roaf, E J

2014-03-01

Infant male circumcision is practised by many groups for religious and cultural reasons. Prompted by a desire to minimize the complication rate and to help parents identify good quality providers, a quality assurance (QA) process for infant male circumcision providers has been developed in Greater Manchester. Local stakeholders agreed a set of minimum standards, and providers were invited to submit evidence of their practice in relation to these standards. In participation with parents, community groups, faith groups, healthcare staff and safeguarding partners, an information leaflet for parents was produced. Engagement work with local community groups, faith groups, providers and healthcare staff was vital to ensure that the resources are accessible to parents and that providers continue to engage in the process. Providers that met the QA standards have been listed on a local website. Details of the website are included in the information leaflet distributed by maternity services, health visitors, primary care and community and faith groups. The leaflet is available in seven languages. Local QA processes can be used to encourage and identify good practice and to support parents who need to access services outside the remit of the National Health Service.

Breeding racehorses: what price good genes?

PubMed

Wilson, Alastair J; Rambaut, Andrew

2008-04-23

Horse racing is a multi-million pound industry, in which genetic information is increasingly used to optimize breeding programmes. To maximize the probability of producing a successful offspring, the owner of a mare should mate her with a high-quality stallion. However, stallions with big reputations command higher stud fees and paying these is only a sensible strategy if, (i) there is a genetic variation for success on the racecourse and (ii) stud fees are an honest signal of a stallion's genetic quality. Using data on thoroughbred racehorses, and lifetime earnings from prize money (LE) as a measure of success, we performed quantitative genetic analyses within an animal model framework to test these two conditions. Although LE is heritable (VA=0.299+/-0.108, Pr=0.002), there is no genetic variance for stud fee and the genetic correlation between traits is therefore zero. This result is supported by an absence of any relationship between stud fees for currently active stallions and the predicted LE for their (hypothetical) offspring. Thus, while there are good genes to be bought, a stallion's fees are not an honest signal of his genetic quality and are a poor predictor of a foal's prize winning potential.

The Implementation of "The n-term" Formula to Improve Student Ability in Determining the Rules of a Numeric Sequence

ERIC Educational Resources Information Center

In'am, Akhsanul; Hajar, Siti

2013-01-01

A good-quality teacher may determines a good-quality learning, thus good-quality students will be the results. In order to have a good-quality learning, a lot of strategies and methods can be adopted. The objective of this research is to improve students' ability in determining the rules of a numeric sequence and analysing the effectiveness of the…

A comparative study of Sephadex, glass wool and Percoll separation techniques on sperm quality and IVF results for cryopreserved bovine semen.

PubMed

Lee, Hae-Lee; Kim, Sue-Hee; Ji, Dong-Beom; Kim, Yong-Jun

2009-09-01

The aim of this study was to compare the effects of spermatozoa separation techniques on sperm quality and in-vitro fertilization (IVF) results for cryopreserved bovine semen. Sephadex, glass wool and Percoll gradient separation techniques were used for sperm separation and sperm motility, morphology and membrane integrity were evaluated before and after separation. Also, cleavage and blastocyst developmental rate were investigated after IVF with sperm recovered by each separation technique. The motility of samples obtained by the three separation techniques were greater compared to the control samples (p < 0.05). The percentage of spermatozoa with intact plasma-membrane integrity, identified by 6-carboxyfluoresceindiacetate/ propidium iodide fluorescent staining and the hypo-osmotic swelling test, was highest in the glass wool filtration samples (p < 0.05). The cleavage and blastocyst rate of total oocytes produced from glass wool filtration samples were also higher than the control and Sephadex filtration samples (p < 0.05), but were not significantly different from Percoll separation samples. However, a significantly greater number of cleaved embryos produced by glass wool filtration developed to blastocyst stage than those produced by Percoll separation (p < 0.05). These results indicate that spermatozoa with good quality can be achieved by these three separation techniques and can be used for bovine IVF. In particular, it suggests that glass wool filtration would be the most effective method of the three for improving sperm quality and embryo production for cryopreserved bovine spermatozoa.

7 CFR 51.481 - Very good internal quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Very good internal quality. 51.481 Section 51.481 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... quality. Very good internal quality means that the combined juice from the edible portion of a sample of...

Sourdough-Based Biotechnologies for the Production of Gluten-Free Foods

PubMed Central

Nionelli, Luana; Rizzello, Carlo Giuseppe

2016-01-01

Sourdough fermentation, a traditional biotechnology for making leavened baked goods, was almost completely replaced by the use of baker’s yeast and chemical leavening agents in the last century. Recently, it has been rediscovered by the scientific community, consumers, and producers, thanks to several effects on organoleptic, technological, nutritional, and functional features of cereal-based products. Acidification, proteolysis, and activation of endogenous enzymes cause several changes during sourdough fermentation, carried out by lactic acid bacteria and yeasts, which positively affect the overall quality of the baked goods. In particular, the hydrolysis of native proteins of the cereal flours may improve the functional features of baked goods. The wheat flour processed with fungal proteases and selected lactic acid bacteria was demonstrated to be safe for coeliac patients. This review article focuses on the biotechnologies that use selected sourdough lactic acid bacteria to potentially counteract the adverse reactions to gluten, and the risk of gluten contamination. PMID:28231160

How To Write Good Science Books for Children & Youths. Asian Cultural Center Training Course on Book Production in Asia and the Pacific (25th, Tokyo, Japan, October 30-November 16, 1992).

ERIC Educational Resources Information Center

Asian Cultural Centre for UNESCO, Tokyo (Japan).

It is of critical importance in the Asia/Pacific region to produce quality science books which are attractive and interesting for children and youths and which can also stimulate their interest in science and provide them with accurate scientific knowledge in an easily understandable way. This publication is a report of a training course on book…

Making equipment to process paddy water for providing drinking water by using Ozone-UVC& Ultrafiltration

NASA Astrophysics Data System (ADS)

Styani, E.; Dja'var, N.; Irawan, C.; Hanafi

2018-01-01

This study focuses on making equipment which is useful to process paddy water to be consumable as drinking water by using ozone-UVC and ultrafiltration. The equipment which is made by the process of ozone-UVC and ultrafiltration or reverse osmosis is driven by electric power generated from solar panels. In the experiment, reverse osmosis system with ozone-UVC reactor proves to be good enough in producing high quality drinking water.

Translations on North Korea, Number 607

DTIC Science & Technology

1978-08-04

in producing many more consumer goods of much better quality. Youth in scientific, educational, literary and artistic circles as well must achieve a...SINMUN in Korean 1 May 78 p 3] MASS GYMNASTIC DISPLAY FOR BOKASSA—The following were seated with Kim Il-song on the viewing platform at the mass... gymnastic display "Song of Korea," which was performed on 1 May at Moranbong Stadium in honor of the visiting Emperor Bokassa I of the Central African

Connecting science and the musical arts in teaching tone quality: Integrating Helmholtz motion and master violin teachers' pedagogies

NASA Astrophysics Data System (ADS)

Collins, Cheri D.

Is it possible for students to achieve better tone quality from even their factory-made violins? All violins, regardless of cost, have a common capacity for good tone in certain frequencies. These signature modes outline the first position range of a violin (196-600 hertz). To activate this basic capacity of all violins, the string must fully vibrate. To accomplish this the bow must be pulled across the string with enough pressure (relative to its speed and contact point) for the horsehairs to catch. This friction permits the string to vibrate in Helmholtz Motion, which produces a corner that travels along the edge of the string between the bridge and the nut. Creating this corner is the most fundamental technique for achieving good tone. The findings of celebrated scientists Ernest Chladni, Hermann von Helmholtz, and John Schelleng will be discussed and the tone-production pedagogy of master teachers Carl Flesch, Ivan Galamian, Robert Gerle, and Simon Fischer will be investigated. Important connections between the insights of these scientists and master teachers are evident. Integrating science and art can provide teachers with a better understanding of the characteristics of good tone. This can help their students achieve the best possible sound from their instruments. In the private studio the master teacher may not use the words "Helmholtz Motion." Yet through modeling and listening students are able to understand and create a quality tone. Music teachers without experience in string performance may be assigned to teach strings in classroom and ensembles settings. As a result modeling good tone is not always possible. However, all teachers and conductors can understand the fundamental behavior of string vibration and adapt their instruction strategies towards student success. Better tonal quality for any string instrument is ultimately achieved. Mastery and use of the Helmholtz Motion benefits teachers and students alike. Simple practice exercises for teaching and conducting, based on student discovery rather than modeling, are presented in Appendix A: Application. This approach to teaching good tone can be applied successfully in all string settings and levels.

The effect of certification and preparation on teacher quality.

PubMed

Boyd, Donald; Goldhaber, Daniel; Lankford, Hamilton; Wyckoff, James

2007-01-01

To improve the quality of the teacher workforce, some states have tightened teacher preparation and certification requirements while others have eased requirements and introduced "alternative" ways of being certified to attract more people to teaching. Donald Boyd, Daniel Goldhaber, Hamilton Lankford, and James Wyckoff evaluate these seemingly contradictory strategies by examining how preparation and certification requirements affect student achivement. If strong requirements improve student outcomes and deter relatively few potential teachers, the authors say, then they may well be good policy. But if they have little effect on student achievement, if they seriously deter potential teachers, or if schools are able to identify applicants who will produce good student outcomes, then easing requirements becomes a more attractive policy. In reviewing research on these issues, the authors find that evidence is often insufficient to draw conclusions. They do find that highly selective alternative route programs can produce effective teachers who perform about the same as teachers from traditional routes after two years on the job. And they find that teachers who score well on certification exams can improve student outcomes somewhat. Limited evidence suggests that certification requirements can diminish the pool of applicants, but there is no evidence on how they affect student outcomes. And the authors find that schools have a limited ability to identify attributes in prospective teachers that allow them to improve student achievement. The authors conclude that the research evidence is simply too thin to have serious implications for policy. Given the enormous investment in teacher preparation and certification and given the possibility that these requirements may worsen student outcomes, the lack of convincing evidence is disturbing. The authors urge researchers and policymakers to work together to move to a more informed position where good resource decisions can be made.

Qualities of a psychiatric mentor: a quantitative Singaporean survey.

PubMed

Tor, Phern-Chern; Goh, Lee-Gan; Ang, Yong-Guan; Lim, Leslie; Winslow, Rasaiah-Munidasa; Ng, Beng-Yeong; Wong, Sze-Tai; Ng, Tse-Pin; Kia, Ee-Heok

2011-11-01

Psychiatric mentors are an important part of the new, seamless training program in Singapore. There is a need to assess the qualities of a good psychiatric mentor vis-à-vis those of a good psychiatrist. An anonymous survey was sent out to all psychiatry trainees and psychiatrists in Singapore to assess quantitatively the relative importance of 40 qualities for a good psychiatrist and a good mentor. The response rate was 48.7% (74/152). Factor analysis showed four themes among the qualities assessed (professional, personal values, relationship, academic-executive). A good mentor is defined by professional, relationship, and personal-values qualities. Mentors have significantly higher scores than psychiatrists for two themes (relationship and academic-executive). Being a good mentor, in Asia, means being a good psychiatrist first and foremost but also requires additional relationship and academic-executive skills. Mentors should be formally trained in these additional skills that were not part of the psychiatric curriculum.

Cost-Effectiveness Thresholds in Global Health: Taking a Multisectoral Perspective.

PubMed

Remme, Michelle; Martinez-Alvarez, Melisa; Vassall, Anna

2017-04-01

Good health is a function of a range of biological, environmental, behavioral, and social factors. The consumption of quality health care services is therefore only a part of how good health is produced. Although few would argue with this, the economic framework used to allocate resources to optimize population health is applied in a way that constrains the analyst and the decision maker to health care services. This approach risks missing two critical issues: 1) multiple sectors contribute to health gain and 2) the goods and services produced by the health sector can have multiple benefits besides health. We illustrate how present cost-effectiveness thresholds could result in health losses, particularly when considering health-producing interventions in other sectors or public health interventions with multisectoral outcomes. We then propose a potentially more optimal second best approach, the so-called cofinancing approach, in which the health payer could redistribute part of its budget to other sectors, where specific nonhealth interventions achieved a health gain more efficiently than the health sector's marginal productivity (opportunity cost). Likewise, other sectors would determine how much to contribute toward such an intervention, given the current marginal productivity of their budgets. Further research is certainly required to test and validate different measurement approaches and to assess the efficiency gains from cofinancing after deducting the transaction costs that would come with such cross-sectoral coordination. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Direct labeling of serum proteins by fluorescent dye for antibody microarray.

PubMed

Klimushina, M V; Gumanova, N G; Metelskaya, V A

2017-05-06

Analysis of serum proteome by antibody microarray is used to identify novel biomarkers and to study signaling pathways including protein phosphorylation and protein-protein interactions. Labeling of serum proteins is important for optimal performance of the antibody microarray. Proper choice of fluorescent label and optimal concentration of protein loaded on the microarray ensure good quality of imaging that can be reliably scanned and processed by the software. We have optimized direct serum protein labeling using fluorescent dye Arrayit Green 540 (Arrayit Corporation, USA) for antibody microarray. Optimized procedure produces high quality images that can be readily scanned and used for statistical analysis of protein composition of the serum. Copyright © 2017 Elsevier Inc. All rights reserved.

A Comparison of LBG and ADPCM Speech Compression Techniques

NASA Astrophysics Data System (ADS)

Bachu, Rajesh G.; Patel, Jignasa; Barkana, Buket D.

Speech compression is the technology of converting human speech into an efficiently encoded representation that can later be decoded to produce a close approximation of the original signal. In all speech there is a degree of predictability and speech coding techniques exploit this to reduce bit rates yet still maintain a suitable level of quality. This paper is a study and implementation of Linde-Buzo-Gray Algorithm (LBG) and Adaptive Differential Pulse Code Modulation (ADPCM) algorithms to compress speech signals. In here we implemented the methods using MATLAB 7.0. The methods we used in this study gave good results and performance in compressing the speech and listening tests showed that efficient and high quality coding is achieved.

Sorghum for human food--a review.

PubMed

Anglani, C

1998-01-01

A brief review of literature on sorghum for human foods and on the relationship among some kernel characteristics and food quality is presented. The chief foods prepared with sorghum, such as tortilla, porridge, couscous and baked goods are described. Tortillas, prepared with 75% of whole sorghum and 25% of yellow maize, are better than those prepared with whole sorghum alone. A porridge formulation with a 30:40:30 mix of sorghum, maize and cassava respectively, has been shown to be the most acceptable combination. The cooked porridge Aceda has lower protein digestibility and higher biological value than the uncooked porridge Aceda. Sorghum is not considered breadmaking flour but the addition of 30% sorghum flour to wheat flour of 72% extraction rate produces a bread, evaluated as good to excellent.

Results from flight and simulator studies of a Mach 3 cruise longitudinal autopilot

NASA Technical Reports Server (NTRS)

Gilyard, G. B.; Smith, J. W.

1978-01-01

At Mach numbers of approximately 3.0 and altitudes greater than 21,300 meters, the original altitude and Mach hold modes of the YF-12 autopilot produced aircraft excursions that were erratic or divergent, or both. Flight data analysis and simulator studies showed that the sensitivity of the static pressure port to angle of attack had a detrimental effect on the performance of the altitude and Mach hold modes. Good altitude hold performance was obtained when a high passed pitch rate feedback was added to compensate for angle of attack sensitivity and the altitude error and integral altitude gains were reduced. Good Mach hold performance was obtained when the angle of attack sensitivity was removed; however, the ride qualities remained poor.

Bioactive Compounds in Functional Meat Products.

PubMed

Pogorzelska-Nowicka, Ewelina; Atanasov, Atanas G; Horbańczuk, Jarosław; Wierzbicka, Agnieszka

2018-01-31

Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional constituents were chosen: (i) fatty acids; (ii) minerals; (iii) vitamins; (iv) plant antioxidants; (v) dietary fibers; (vi) probiotics and (vii) bioactive peptides. Each of them is discussed in term of their impact on human health as well as some quality attributes of the final products.

19 CFR 10.1015 - Regional value content.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-produced and used by the producer in the production of the good. (d) Special rule for certain automotive... content test for an automotive good provided for in any of subheadings 8407.31 through 8407.34 (engines... produced by the producer of the automotive good, subtracting any sales promotion, marketing, and after...

19 CFR 10.1015 - Regional value content.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-produced and used by the producer in the production of the good. (d) Special rule for certain automotive... content test for an automotive good provided for in any of subheadings 8407.31 through 8407.34 (engines... produced by the producer of the automotive good, subtracting any sales promotion, marketing, and after...

19 CFR 10.1015 - Regional value content.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-produced and used by the producer in the production of the good. (d) Special rule for certain automotive... content test for an automotive good provided for in any of subheadings 8407.31 through 8407.34 (engines... produced by the producer of the automotive good, subtracting any sales promotion, marketing, and after...

Yeast-Leavened Laminated Salty Baked Goods: Flour and Dough Properties and Their Relationship with Product Technological Quality

PubMed Central

de la Horra, Ana E.; Steffolani, María Eugenia; Barrera, Gabriela N.; Ribotta, Pablo D.

2015-01-01

Summary The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products. PMID:27904379

Yeast-Leavened Laminated Salty Baked Goods: Flour and Dough Properties and Their Relationship with Product Technological Quality.

PubMed

de la Horra, Ana E; Steffolani, María Eugenia; Barrera, Gabriela N; Ribotta, Pablo D; León, Alberto E

2015-12-01

The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products.

The effect of pale, soft and exudative meat on the quality of canned pork in gravy.

PubMed

Florowski, Tomasz; Florowska, Anna; Chmiel, Marta; Adamczak, Lech; Pietrzak, Dorota; Ruchlicka, Magdalena

2017-01-01

The objective of the study was to evaluate the use of PSE meat in the production of sterilized pork type canned meat in its own gravy. Canned meat products were produced with 50% of PSE meat as well as with 100% PSE meat, and compared with canned meat products of good quality (RFN). It was found that decreased quality of PSE meat had a small impact on the quality of canned meat products. Substitution of both 50% as well as the total quantity of RFN meat with PSE meat did not affect the course of the sterilization process, neither increase the quantity of excreted fat and jelly in canned meat. It also had no effect on the instrumentally-measured parameters of texture and neither did it affect different sensory quality features, including the overall desirability of the product. The PSE canned meat product were characterized by higher values of L* and b* color parameters. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of a wheat-Aegilops searsii substitution line with positively affecting Chinese steamed bread quality.

PubMed

Du, Xuye; Ma, Xin; Min, Jingzhi; Zhang, Xiaocun; Jia, Zhenzhen

2018-03-01

A wheat- Aegilops searsii substitution line GL1402, in which chromosome 1B was substituted with 1S s from Ae. searsii , was developed and detected using SDS-PAGE and GISH. The SDS-PAGE analysis showed that the HMW-GS encoded by the Glu-B1 loci of Chinese Spring was replaced by the HMW-GS encoded by the Glu-1S s loci of Ae. searsii . Glutenin macropolymer (GMP) investigation showed that GL1402 had a much higher GMP content than Chinese Spring did. A dough quality comparison of GL1402 and Chinese Spring indicated that GL1402 showed a significantly higher protein content and middle peak time (MPT), and a smaller right peak slope (RPS). Quality tests of Chinese steamed bread (CSB) showed that the GL1402 also produced good steamed bread quality. These results suggested that the substitution line is a valuable breeding material for improving the wheat processing quality.

Attitudes towards the Canadian quality milk program and use of good production practices among Canadian dairy producers.

PubMed

Young, I; Rajić, A; Hendrick, S; Parker, S; Sanchez, J; McClure, J T; McEwen, S A

2010-04-01

To harmonize good production practices (GPP) for dairy producers in Canada, the Canadian dairy industry has developed and is implementing a program called Canadian Quality Milk (CQM). A postal questionnaire was administered to all Canadian dairy producers enrolled in dairy herd-improvement organizations in 2008 (n=10,474) to investigate their attitudes towards the program and to establish baseline information on their use of GPP. The response percentage was 20.9% (2185/10,474). Two-thirds of producers (67.6%) reported participation in CQM and 61.4% of these indicated that the requirements were easy to implement. Most producers (85.0%) reported the use of cats as a pest-control method in their barns. For dead-livestock disposal, 65.0% and 38.0% indicated use of a collection service and burial, respectively. Nearly 40.0% of respondents indicated that they purchase replacement cattle, and somatic cell-count score was the main health indicator considered before purchase. Over 70% of producers reported that they clean and disinfect maternity, calf and weaned-calf pens, while only 34.1% and 53.1% reported that they provide visitors and employees, respectively, with clean clothes and boots. Through latent-class analysis, five groups (classes) of producers with distinctive patterns of reported use of GPP were identified. These were labelled as "minimal", "sanitation-only", "employee-visitor hygiene", "typical" and "ideal" user groups, with 11.1%, 23.8%, 20.2%, 37.1% and 7.7% of respondents, respectively. Respondents in the "ideal users" group had a higher probability of reporting the use of each GPP and were more likely to have completed an educational course in food safety compared to respondents in each other group. They were also more likely to have a herd size in the uppermost quartile (>65 cows) and report participation in CQM compared to each other group except the "employee-visitor hygiene users". The greatest differences were observed when compared to the "minimal users" group for completion of a food-safety course (OR=2.81), participation in CQM (OR=2.39) and having a herd size of >65 vs. <36 cows (OR=3.04). Targeted education of dairy producers on the importance of various GPP (e.g. detailed health assessments of replacement cattle before purchase) for infection control is warranted.

An inverse dynamics approach to face animation.

PubMed

Pitermann, M; Munhall, K G

2001-09-01

Muscle-based models of the human face produce high quality animation but rely on recorded muscle activity signals or synthetic muscle signals that are often derived by trial and error. This paper presents a dynamic inversion of a muscle-based model (Lucero and Munhall, 1999) that permits the animation to be created from kinematic recordings of facial movements. Using a nonlinear optimizer (Powell's algorithm), the inversion produces a muscle activity set for seven muscles in the lower face that minimize the root mean square error between kinematic data recorded with OPTOTRAK and the corresponding nodes of the modeled facial mesh. This inverted muscle activity is then used to animate the facial model. In three tests of the inversion, strong correlations were observed for kinematics produced from synthetic muscle activity, for OPTOTRAK kinematics recorded from a talker for whom the facial model is morphologically adapted and finally for another talker with the model morphology adapted to a different individual. The correspondence between the animation kinematics and the three-dimensional OPTOTRAK data are very good and the animation is of high quality. Because the kinematic to electromyography (EMG) inversion is ill posed, there is no relation between the actual EMG and the inverted EMG. The overall redundancy of the motor system means that many different EMG patterns can produce the same kinematic output.

[Spatial variation of soil properties and quality evaluation for arable Ustic Cambosols in central Henan Province].

PubMed

Zhang, Xue-Lei; Feng, Wan-Wan; Zhong, Guo-Min

2011-01-01

A GIS-based 500 m x 500 m soil sampling point arrangement was set on 248 points at Wenshu Town of Yuzhou County in central Henan Province, where the typical Ustic Cambosols locates. By using soil digital data, the spatial database was established, from which, all the needed latitude and longitude data of the sampling points were produced for the field GPS guide. Soil samples (0-20 cm) were collected from 202 points, of which, bulk density measurement were conducted for randomly selected 34 points, and the ten soil property items used as the factors for soil quality assessment, including organic matter, available K, available P, pH, total N, total P, soil texture, cation exchange capacity (CEC), slowly available K, and bulk density, were analyzed for the other points. The soil property items were checked by statistic tools, and then, classified with standard criteria at home and abroad. The factor weight was given by analytic hierarchy process (AHP) method, and the spatial variation of the major 10 soil properties as well as the soil quality classes and their occupied areas were worked out by Kriging interpolation maps. The results showed that the arable Ustic Cambosols in study area was of good quality soil, over 95% of which ranked in good and medium classes and only less than 5% were in poor class.

Effect of nitrogen fertilisation on the overall quality of minimally processed globe artichoke heads.

PubMed

Lombardo, Sara; Restuccia, Cristina; Muratore, Giuseppe; Barbagallo, Riccardo N; Licciardello, Fabio; Pandino, Gaetano; Scifò, Giovanna O; Mazzaglia, Agata; Ragonese, Francesca; Mauromicale, Giovanni

2017-01-01

Although nitrogen (N) fertilisation is essential for promoting crop yield, it may also affect the produce quality. Here, the influence of three N fertiliser rates (0 kg ha -1 as a control, 200 kg ha -1 and 400 kg ha -1 referred to as N 0 , N 200 and N 400 , respectively) on the overall quality of minimally processed globe artichoke heads was investigated during refrigerated storage for 12 days. Throughout the storage time, N fertilised samples had higher inulin contents than those unfertilised. In addition, the respiratory quotient of N 200 and N 400 samples was 2-fold and 2.5-fold lower than N 0 ones, whose values were close to the normal range for vegetables. All the samples reported good microbiological standards, although N 200 and N 400 achieved lower mesophilic and psychotropic counts than N 0 throughout the storage time. After 8 and 12 days of refrigerated storage, the N 200 samples showed the highest scores of positive sensory descriptors. A fertiliser level of 200 kg N ha -1 is suitable for obtaining minimally processed globe artichoke heads with good nutritional, sensory and microbiological quality, characterised by low endogenous oxidase activities. Proper packaging systems and procedures are, however, crucial for extending the product shelf-life and, thus, promoting its exportation on a wider scale. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Hermetic edge sealing of photovoltaic modules

NASA Astrophysics Data System (ADS)

Nowlan, M. J.

1983-07-01

The feasibility of using an electrostatic bonding (ESB) and ultrasonic welding process to produce hermetic edge seals on terrestrial solar cell modules was investigated. The fabrication sequence is to attach an aluminum foil "gasket' to the perimeter of a glass sheet. A cell circuit is next encapsulated inside the gasket, and its aluminum foil back cover is seam welded ultrasonically to the gasket. An ESB process for sealing aluminum to glass was developed in an ambient air atmosphere, which eliminates the requirement for a vacuum or pressure vessel. An ultrasonic seam welding process was also developed which did not degrade the quality of the ESB seal. Good quality welds with minimal deformation were produced. The effectiveness of the above described sealing techniques was tested by constructing 400 sq cm (8 x 8 s64 sq in) sample modules, and then subjecting them to nondestructive fine and gross leak tests. The gross leak tests identified several different causes of leaks which were then eliminated by modifying the assembly process.

Hermetic edge sealing of photovoltaic modules

NASA Technical Reports Server (NTRS)

Nowlan, M. J.

1983-01-01

The feasibility of using an electrostatic bonding (ESB) and ultrasonic welding process to produce hermetic edge seals on terrestrial solar cell modules was investigated. The fabrication sequence is to attach an aluminum foil "gasket' to the perimeter of a glass sheet. A cell circuit is next encapsulated inside the gasket, and its aluminum foil back cover is seam welded ultrasonically to the gasket. An ESB process for sealing aluminum to glass was developed in an ambient air atmosphere, which eliminates the requirement for a vacuum or pressure vessel. An ultrasonic seam welding process was also developed which did not degrade the quality of the ESB seal. Good quality welds with minimal deformation were produced. The effectiveness of the above described sealing techniques was tested by constructing 400 sq cm (8 x 8 s64 sq in) sample modules, and then subjecting them to nondestructive fine and gross leak tests. The gross leak tests identified several different causes of leaks which were then eliminated by modifying the assembly process.

Production of High Quality Die Steels from Large ESR Slab Ingots

NASA Astrophysics Data System (ADS)

Geng, Xin; Jiang, Zhou-hua; Li, Hua-bing; Liu, Fu-bin; Li, Xing

With the rapid development of manufacture industry in China, die steels are in great need of large slab ingot of high quality and large tonnage, such as P20, WSM718R and so on. Solidification structure and size of large slab ingots produced with conventional methods are not satisfied. However, large slab ingots manufactured by ESR process have a good solidification structure and enough section size. In the present research, the new slab ESR process was used to produce the die steels large slab ingots with the maximum size of 980×2000×3200mm. The compact and sound ingot can be manufactured by the slab ESR process. The ultra-heavy plates with the maximum thickness of 410 mm can be obtained after rolling the 49 tons ingots. Due to reducing the cogging and forging process, the ESR for large slab ingots process can increase greatly the yield and production efficiency, and evidently cut off product costs.

Performance evaluation of image-intensifier-TV fluoroscopy systems

NASA Astrophysics Data System (ADS)

van der Putten, Wilhelm J.; Bouley, Shawn

1995-05-01

Through use of a computer model and an aluminum low contrast phantom developed in-house, a method has been developed which is able to grade the imaging performance of fluoroscopy systems through use of a variable, K. This parameter was derived from Rose's model of image perception and is here used as a figure of merit to grade fluoroscopy systems. From Rose's model for an ideal system, a typical value of K for the perception of low contrast details should be between 3 and 7, assuming threshold vision by human observers. Thus, various fluoroscopy systems are graded with different values of K, with a lower value of K indicating better imaging performance of the system. A series of fluoroscopy systems have been graded where the best system produces a value in the low teens, while the poorest systems produce a value in the low twenties. Correlation with conventional image quality measurements is good and the method has the potential for automated assessment of image quality.

Fast and robust wavelet-based dynamic range compression and contrast enhancement model with color restoration

NASA Astrophysics Data System (ADS)

Unaldi, Numan; Asari, Vijayan K.; Rahman, Zia-ur

2009-05-01

Recently we proposed a wavelet-based dynamic range compression algorithm to improve the visual quality of digital images captured from high dynamic range scenes with non-uniform lighting conditions. The fast image enhancement algorithm that provides dynamic range compression, while preserving the local contrast and tonal rendition, is also a good candidate for real time video processing applications. Although the colors of the enhanced images produced by the proposed algorithm are consistent with the colors of the original image, the proposed algorithm fails to produce color constant results for some "pathological" scenes that have very strong spectral characteristics in a single band. The linear color restoration process is the main reason for this drawback. Hence, a different approach is required for the final color restoration process. In this paper the latest version of the proposed algorithm, which deals with this issue is presented. The results obtained by applying the algorithm to numerous natural images show strong robustness and high image quality.

Low-speed longitudinal orbiter qualities

NASA Technical Reports Server (NTRS)

Powers, B. G.

1985-01-01

The shuttle program took on the challenge of providing a manual landing capability for an operational vehicle returning from orbit. Some complex challenges were encountered in developing the longitudinal flying qualities required to land the orbiter manually in an operational environment. Approach and landing test flights indicated a tendency for pilot-induced oscillation near landing. Changes in the operational procedures reduced the difficulty of the landing task, and an adaptive stick filter was incorporated to reduce the severity of any pilot-induced oscillatory motions. Fixed-base, movingbase, and in-flight simulations were used for the evaluations, and in general, flight simulation was the only reliable means of assessing the low-speed longitudinal flying qualities problems. Overall, the orbiter control system and operational procedures have produced a good capability to routinely perform precise landings with a large, unpowered vehicle with a low lift-to-drag ratio.

Statistical issues in quality control of proteomic analyses: good experimental design and planning.

PubMed

Cairns, David A

2011-03-01

Quality control is becoming increasingly important in proteomic investigations as experiments become more multivariate and quantitative. Quality control applies to all stages of an investigation and statistics can play a key role. In this review, the role of statistical ideas in the design and planning of an investigation is described. This involves the design of unbiased experiments using key concepts from statistical experimental design, the understanding of the biological and analytical variation in a system using variance components analysis and the determination of a required sample size to perform a statistically powerful investigation. These concepts are described through simple examples and an example data set from a 2-D DIGE pilot experiment. Each of these concepts can prove useful in producing better and more reproducible data. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison of two DNA extraction protocols from leave samples of Cotinus coggygria, Citrus sinensis and Genus juglans.

PubMed

Fallah, F; Minaei Chenar, H; Amiri, H; Omodipour, S; Shirbande Ghods, F; Kahrizi, D; Sohrabi, M; Ghorbani, T; Kazemi, E

2017-02-28

High quality DNA is essential for molecular research. Secondary metabolites can affect the quantity and quality DNA. In current research two DNA isolation methods including CTAB and Delaporta (protocols 1 & 2 respectively) were applied in three leave samples from Cotinus coggygria, Citrus sinensis and Genus juglans that their leaves are rich of secondary metabolites. We successfully isolated DNA from C. coggygria, C. sinensis and Genus Juglans using the two protocols described above. Good quality DNA was isolated from C. coggygria, C. sinensis and Genus Juglans using protocol 1, while protocol 2 failed to produce usable DNA from these sources. The highest amount of DNA (1.3-1.6) was obtained from them using protocol 1. As we discovered, procedure 1 may work better for plants with secondary metabolites.

A Systematic Review of the Clinimetric Properties of Habitual Physical Activity Measures in Young Children with a Motor Disability

PubMed Central

Oftedal, Stina; Bell, Kristie L.; Mitchell, Louise E.; Davies, Peter S. W.; Ware, Robert S.; Boyd, Roslyn N.

2012-01-01

Aim. To identify and systematically review the clinimetric properties of habitual physical activity (HPA) measures in young children with a motor disability. Method. Five databases were searched for measures of HPA including: children aged <6.0 years with a neuromuscular disorder, physical activity defined as “bodily movement produced by skeletal muscles causing caloric expenditure”, reported HPA as duration, frequency, intensity, mode or energy expenditure, and evaluated clinimetric properties. The quality of papers was assessed using the COSMIN-checklist. A targeted search of identified measures found additional studies of typically developing young children (TDC). Results. Seven papers assessing four activity monitors met inclusion criteria. Four studies were of good methodological quality. The Minimod had good ability to measure continuous walking but the demonstrated poor ability to measure steps during free-living activities. The Intelligent Device for Energy Expenditure and Activity and Ambulatory Monitoring Pod showed poor ability to measure activity during both continuous walking and free-living activities. The StepWatch showed good ability to measure steps during continuous walking in TDC. Interpretation. Studies assessing the clinimetric properties of measures of HPA in this population are urgently needed to allow assessment of the relationship between HPA and health outcomes in this group. PMID:22927865

Is cryopreservation of embryos a legitimate surrogate marker of embryo quality in studies of assisted reproductive technology conducted using national databases?

PubMed

Stern, Judy E; Lieberman, Ellice S; Macaluso, Maurizio; Racowsky, Catherine

2012-04-01

To investigate whether cryopreservation of supernumerary embryos is a good surrogate for embryo quality. Retrospective study of 6,859 assisted reproductive technology (ART) cycles from women aged <35 years with two fresh day 3 embryos transferred. National Society for Assisted Reproductive Technology Clinic Outcome Reporting System data from 2006-2008. Women undergoing ART. None. Embryo quality (good, fair, or poor), cell number, and live births were compared for cycles with and without cryopreservation, using χ(2) to evaluate statistical significance. The association of freezing with embryo quality was examined using multiple logistic regression after adjusting for confounders (patient age, oocyte yield, intracytoplasmic sperm injection [ICSI], assisted hatching, male factor infertility). Cycles with cryopreservation were more likely to have two embryos of good quality transferred (81.3% vs. 48.5%) and had more 8-cell embryos transferred (76.0% vs. 50.1%). Relative to cycles with two good embryos (good-good), the adjusted odds ratios (OR) for cryopreservation were: good-fair (OR = 0.301, 95% confidence interval [CI] = 0.257-0.354), fair-fair (OR = 0.308, 95% CI = 0.258-0.367), and any poor (OR = 0.058, 95% CI = 0.040-0.083). The live birth rate was 52.4% for cycles with freezing and 40.6% for cycles without. Embryo quality and cell number were both associated with embryo cryopreservation. However, although cryopreservation was a strong marker for good quality, not having cryopreservation did not reliably indicate poor quality, as almost half of those cycles had two good quality embryos. Copyright © 2012 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Massive stereo-based DTM production for Mars on cloud computers

NASA Astrophysics Data System (ADS)

Tao, Y.; Muller, J.-P.; Sidiropoulos, P.; Xiong, Si-Ting; Putri, A. R. D.; Walter, S. H. G.; Veitch-Michaelis, J.; Yershov, V.

2018-05-01

Digital Terrain Model (DTM) creation is essential to improving our understanding of the formation processes of the Martian surface. Although there have been previous demonstrations of open-source or commercial planetary 3D reconstruction software, planetary scientists are still struggling with creating good quality DTMs that meet their science needs, especially when there is a requirement to produce a large number of high quality DTMs using "free" software. In this paper, we describe a new open source system to overcome many of these obstacles by demonstrating results in the context of issues found from experience with several planetary DTM pipelines. We introduce a new fully automated multi-resolution DTM processing chain for NASA Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) and High Resolution Imaging Science Experiment (HiRISE) stereo processing, called the Co-registration Ames Stereo Pipeline (ASP) Gotcha Optimised (CASP-GO), based on the open source NASA ASP. CASP-GO employs tie-point based multi-resolution image co-registration, and Gotcha sub-pixel refinement and densification. CASP-GO pipeline is used to produce planet-wide CTX and HiRISE DTMs that guarantee global geo-referencing compliance with respect to High Resolution Stereo Colour imaging (HRSC), and thence to the Mars Orbiter Laser Altimeter (MOLA); providing refined stereo matching completeness and accuracy. All software and good quality products introduced in this paper are being made open-source to the planetary science community through collaboration with NASA Ames, United States Geological Survey (USGS) and the Jet Propulsion Laboratory (JPL), Advanced Multi-Mission Operations System (AMMOS) Planetary Data System (PDS) Pipeline Service (APPS-PDS4), as well as browseable and visualisable through the iMars web based Geographic Information System (webGIS) system.

The effect of gypsum products and separating materials on the typography of denture base materials.

PubMed

Firtell, D N; Walsh, J F; Elahi, J M

1980-09-01

The typography of polymethyl methacrylate processed against various gypsum products coated with various separating materials was studied under an SEM. Tinfoil and two commercial tin foil substitutes were used as separating material during processing, and the surfaces of the resulting acrylic resin forms were studied for topographical differences. Tinfoil and alpha 2 hemihydrates produced the smoothest surfaces. As a practical solution, a good quality tinfoil substitute and alpha 1 hemihydrate could be used when processing polymethyl methacrylate resin.

Deep Sky Imaging: Workflow 2

NASA Astrophysics Data System (ADS)

Schedler, Johannes

As astrophotographers we are living in a golden age. In recent years CCD technology and the quality of amateur telescopes have reached a level of perfection, giving amateurs the chance to produce images rivaling those taken from mountaintops by large professional systems as recently as two decades ago. However hardware and good imaging location is only a part of the game. A high level of skill with image processing can offer amateurs an edge and provide a chance to compensate for the limited aperture of our telescopes.

20V, 40 Ah Lithium Ion Polymer Battery for the Spacesuit

NASA Technical Reports Server (NTRS)

Darcy, Eric; Wilburn, Monique; Hall, Dan; Roth, Peter; Das Gupta, Sankar; Jacobs, Jim; Bhola, Rakesh; Milicic, Gordan; Vandemeer, Dave

2006-01-01

Objective: Consider a new battery design for EMU. Results: a) Electrovaya s aerospace cell production line is improving, but must further improve to achieve acceptable reliability; b) Completed functional, vibration, and thermal cycling of LIB; c) So far, electrical safety tests have produced good results; d) Completed functional, vibration, thermal cycling, power quality and EMI of LIB Charger; e) Completed CDR on 9/23/04; and f) Manufacturing Readiness Review for flight cell/battery production scheduled for Dec 04.

Ground vibrations from heavy freight trains

NASA Astrophysics Data System (ADS)

Dawn, T. M.

1983-03-01

Ground vibration from heavy freight trains on good quality welded track are found to have only a weak dependence on train speed above 30 km/h. At the site on which these tests were carried out a critical speed was found at which the vibration reached a peak. The frequencies of vibration produced appear to be functions of track and vehicle dimensions and the critical speed occurs at the coincidence of sleeper passage frequency and the total vehicle on track resonance frequency.

Black Ink of Activated Carbon Derived From Palm Kernel Cake (PKC)

NASA Astrophysics Data System (ADS)

Selamat, M. H.; Ahmad, A. H.

2009-06-01

Recycling the waste from natural plant to produce useful end products will benefit many industries and help preserve the environment. The research reported in this paper is an investigation on the use of the natural waste of palm kernel cake (PKC) to produce carbon residue as a black carbon for pigment source by using pyrolysis process. The activated carbons (AC) is produced in powder form using ball milling process. Rheological spectra in ink is one of quality control process in determining its performance properties. Findings from this study will help expand the scientific knowledge-base for black ink production and formulation base on PKC. Various inks with different weight percentage compositions of AC will be made and tested against its respective rheological properties in order to determine ideal ink printing system. The items in the formulation used comprised of organic and bio-waste materials with added additive to improve the quality of the black ink. Modified Polyurethane was used as binder. The binder's properties highlighted an ideal vehicle to be applied for good black ink opacity performance. The rheological behaviour is a general foundation for ink characterization where the wt% of AC-PKC resulted in different pseudoplastic behaviors, including the Newtonian behavior. The result found that Newtonian field was located in between 2 wt% and 10 wt% of AC-PKC composition with binder. Mass spectroscopy results shown that the carbon content in PKC is high and very suitable for black performance. In the ageing test, the pigment of PKC perform fairly according to the standard pigment of Black carbon (CB) of ferum oxide pigment. The contact angle for substrate's wettability of the ink system shown a good angle proven to be a water resistive coating on paper subtrates; an advantage of the PKC ink pigment performance.

Polemics on Ethical Aspects in the Compost Business.

PubMed

Maroušek, Josef; Hašková, Simona; Zeman, Robert; Žák, Jaroslav; Vaníčková, Radka; Maroušková, Anna; Váchal, Jan; Myšková, Kateřina

2016-04-01

This paper focuses on compost use in overpasses and underpasses for wild animals over roads and other similar linear structures. In this context, good quality of compost may result in faster and more resistant vegetation cover during the year. Inter alia, this can be interpreted also as reduction of damage and saving lives. There are millions of tones of plant residue produced every day worldwide. These represent prospective business for manufacturers of compost additives called "accelerators". The opinions of the sale representatives' with regards to other alternatives of biowaste utilization and their own products were reviewed. The robust analyzes of several "accelerated" composts revealed that the quality was generally low. Only two accelerated composts were somewhat similar in quality to the blank sample that was produced according to the traditional procedure. Overlaps between the interests of decision makers on future soil fertility were weighed against the preferences on short-term profit. Possible causes that allowed the boom of these underperforming products and the possible consequences are also discussed. Conclusions regarding the ethical concerns on how to run businesses with products whose profitability depends on weaknesses in the legal system and customer unawareness are to follow.

Trial production of fuel pellet from Acacia mangium bark waste biomass

NASA Astrophysics Data System (ADS)

Amirta, R.; Anwar, T.; Sudrajat; Yuliansyah; Suwinarti, W.

2018-04-01

Fuel pellet is one of the innovation products that can be produced from various sources of biomass such as agricultural residues, forestry and also wood industries including wood bark. Herein this paper, the potential fuel pellet production using Acacia mangium bark that abundant wasted from chip mill industry was studied. Fuel pellet was produced using a modified animal feed pellet press machine equipped with rotating roller-cylinders. The international standards quality of fuel pellet such as ONORM (Austria), SS (Sweden), DIN (Germany), EN (European) and ITEBE (Italy) were used to evaluate the optimum composition of feedstock and additive used. Theresults showed the quality offuel pellet produced were good compared to commercial sawdust pellet. Mixed of Acacia bark (dust) with 10% of tapioca and 20% of glycerol (w/w) was increased the stable form of pellet and the highest heating value to reached 4,383 Kcal/kg (calorific value). Blending of Acacia bark with tapioca and glycerol was positively improved its physical, chemical and combustion properties to met the international standards requirement for export market. Based on this finding, production of fuel pellet from Acacia bark waste biomass was promising to be developed as an alternative substitution of fossil energy in the future.

An optimized immunohistochemistry protocol for detecting the guidance cue Netrin-1 in neural tissue.

PubMed

Salameh, Samer; Nouel, Dominique; Flores, Cecilia; Hoops, Daniel

2018-01-01

Netrin-1, an axon guidance protein, is difficult to detect using immunohistochemistry. We performed a multi-step, blinded, and controlled protocol optimization procedure to establish an efficient and effective fluorescent immunohistochemistry protocol for characterizing Netrin-1 expression. Coronal mouse brain sections were used to test numerous antigen retrieval methods and combinations thereof in order to optimize the stain quality of a commercially available Netrin-1 antibody. Stain quality was evaluated by experienced neuroanatomists for two criteria: signal intensity and signal-to-noise ratio. After five rounds of testing protocol variants, we established a modified immunohistochemistry protocol that produced a Netrin-1 signal with good signal intensity and a high signal-to-noise ratio. The key protocol modifications are as follows: •Use phosphate buffer (PB) as the blocking solution solvent.•Use 1% sodium dodecyl sulfate (SDS) treatment for antigen retrieval. The original protocol was optimized for use with the Netrin-1 antibody produced by Novus Biologicals. However, we subsequently further modified the protocol to work with the antibody produced by Abcam. The Abcam protocol uses PBS as the blocking solution solvent and adds a citrate buffer antigen retrieval step.

29 CFR 779.243 - Goods that have been “produced for commerce by any person.”

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Goods that have been âproduced for commerce by any person.â... Moved in Or Produced for Commerce by Any Person § 779.243 Goods that have been “produced for commerce by... that have been “produced for commerce by any person” within the meaning of section 3(s), if he is...

29 CFR 779.243 - Goods that have been “produced for commerce by any person.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Goods that have been âproduced for commerce by any person.â... Moved in Or Produced for Commerce by Any Person § 779.243 Goods that have been “produced for commerce by... that have been “produced for commerce by any person” within the meaning of section 3(s), if he is...

29 CFR 779.243 - Goods that have been “produced for commerce by any person.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Goods that have been âproduced for commerce by any person.â... Moved in Or Produced for Commerce by Any Person § 779.243 Goods that have been “produced for commerce by... that have been “produced for commerce by any person” within the meaning of section 3(s), if he is...

29 CFR 779.243 - Goods that have been “produced for commerce by any person.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Goods that have been âproduced for commerce by any person.â... Moved in Or Produced for Commerce by Any Person § 779.243 Goods that have been “produced for commerce by... that have been “produced for commerce by any person” within the meaning of section 3(s), if he is...

29 CFR 779.243 - Goods that have been “produced for commerce by any person.”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Goods that have been âproduced for commerce by any person.â... Moved in Or Produced for Commerce by Any Person § 779.243 Goods that have been “produced for commerce by... that have been “produced for commerce by any person” within the meaning of section 3(s), if he is...

29 CFR 1620.5 - What goods are considered as “produced for commerce.”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false What goods are considered as âproduced for commerce.â 1620.5 Section 1620.5 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.5 What goods are considered as “produced for commerce.” Goods (as defined...

Pragmatic quality metrics for evolutionary software development models

NASA Technical Reports Server (NTRS)

Royce, Walker

1990-01-01

Due to the large number of product, project, and people parameters which impact large custom software development efforts, measurement of software product quality is a complex undertaking. Furthermore, the absolute perspective from which quality is measured (customer satisfaction) is intangible. While we probably can't say what the absolute quality of a software product is, we can determine the relative quality, the adequacy of this quality with respect to pragmatic considerations, and identify good and bad trends during development. While no two software engineers will ever agree on an optimum definition of software quality, they will agree that the most important perspective of software quality is its ease of change. We can call this flexibility, adaptability, or some other vague term, but the critical characteristic of software is that it is soft. The easier the product is to modify, the easier it is to achieve any other software quality perspective. This paper presents objective quality metrics derived from consistent lifecycle perspectives of rework which, when used in concert with an evolutionary development approach, can provide useful insight to produce better quality per unit cost/schedule or to achieve adequate quality more efficiently. The usefulness of these metrics is evaluated by applying them to a large, real world, Ada project.

Catalyst-Free Growth of Three-Dimensional Graphene Flakes and Graphene/g-C₃N₄ Composite for Hydrocarbon Oxidation.

PubMed

Chen, Ke; Chai, Zhigang; Li, Cong; Shi, Liurong; Liu, Mengxi; Xie, Qin; Zhang, Yanfeng; Xu, Dongsheng; Manivannan, Ayyakkannu; Liu, Zhongfan

2016-03-22

Mass production of high-quality graphene flakes is important for commercial applications. Graphene microsheets have been produced on an industrial scale by chemical and liquid-phase exfoliation of graphite. However, strong-interaction-induced interlayer aggregation usually leads to the degradation of their intrinsic properties. Moreover, the crystallinity or layer-thickness controllability is not so perfect to fulfill the requirement for advanced technologies. Herein, we report a quartz-powder-derived chemical vapor deposition growth of three-dimensional (3D) high-quality graphene flakes and demonstrate the fabrication and application of graphene/g-C3N4 composites. The graphene flakes obtained after the removal of growth substrates exhibit the 3D curved microstructure, controllable layer thickness, good crystallinity, as well as weak interlayer interactions suitable for preventing the interlayer stacking. Benefiting from this, we achieved the direct synthesis of g-C3N4 on purified graphene flakes to form the uniform graphene/g-C3N4 composite, which provides efficient electron transfer interfaces to boost its catalytic oxidation activity of cycloalkane with relatively high yield, good selectivity, and reliable stability.

Neighborhood scale quantification of ecosystem goods and ...

EPA Pesticide Factsheets

Ecosystem goods and services are those ecological structures and functions that humans can directly relate to their state of well-being. Ecosystem goods and services include, but are not limited to, a sufficient fresh water supply, fertile lands to produce agricultural products, shading, air and water of sufficient quality for designated uses, flood water retention, and places to recreate. The US Environmental Protection Agency (USEPA) Office of Research and Development’s Tampa Bay Ecosystem Services Demonstration Project (TBESDP) modeling efforts organized existing literature values for biophysical attributes and processes related to EGS. The goal was to develop a database for informing mapped-based EGS assessments for current and future land cover/use scenarios at multiple scales. This report serves as a demonstration of applying an EGS assessment approach at the large neighborhood scale (~1,000 acres of residential parcels plus common areas). Here, we present mapped inventories of ecosystem goods and services production at a neighborhood scale within the Tampa Bay, FL region. Comparisons of the inventory between two alternative neighborhood designs are presented as an example of how one might apply EGS concepts at this scale.

Testing ZigBee Motes for Monitoring Refrigerated Vegetable Transportation under Real Conditions

PubMed Central

Ruiz-Garcia, Luis; Barreiro, Pilar; Robla, Jose Ignacio; Lunadei, Loredana

2010-01-01

Quality control and monitoring of perishable goods during transportation and delivery services is an increasing concern for producers, suppliers, transport decision makers and consumers. The major challenge is to ensure a continuous ‘cold chain’ from producer to consumer in order to guaranty prime condition of goods. In this framework, the suitability of ZigBee protocol for monitoring refrigerated transportation has been proposed by several authors. However, up to date there was not any experimental work performed under real conditions. Thus, the main objective of our experiment was to test wireless sensor motes based in the ZigBee/IEEE 802.15.4 protocol during a real shipment. The experiment was conducted in a refrigerated truck traveling through two countries (Spain and France) which means a journey of 1,051 kilometers. The paper illustrates the great potential of this type of motes, providing information about several parameters such as temperature, relative humidity, door openings and truck stops. Psychrometric charts have also been developed for improving the knowledge about water loss and condensation on the product during shipments. PMID:22399917

Testing ZigBee motes for monitoring refrigerated vegetable transportation under real conditions.

PubMed

Ruiz-Garcia, Luis; Barreiro, Pilar; Robla, Jose Ignacio; Lunadei, Loredana

2010-01-01

Quality control and monitoring of perishable goods during transportation and delivery services is an increasing concern for producers, suppliers, transport decision makers and consumers. The major challenge is to ensure a continuous 'cold chain' from producer to consumer in order to guaranty prime condition of goods. In this framework, the suitability of ZigBee protocol for monitoring refrigerated transportation has been proposed by several authors. However, up to date there was not any experimental work performed under real conditions. Thus, the main objective of our experiment was to test wireless sensor motes based in the ZigBee/IEEE 802.15.4 protocol during a real shipment. The experiment was conducted in a refrigerated truck traveling through two countries (Spain and France) which means a journey of 1,051 kilometers. The paper illustrates the great potential of this type of motes, providing information about several parameters such as temperature, relative humidity, door openings and truck stops. Psychrometric charts have also been developed for improving the knowledge about water loss and condensation on the product during shipments.

19 CFR 10.2015 - Regional value content.

Code of Federal Regulations, 2014 CFR

2014-04-01

... good. (d) Special rule for certain automotive goods. (1) General. Where General Note 35, HTSUS, sets forth a rule that specifies a regional value content test for an automotive good provided for in any of... all goods produced by the producer of the automotive good, subtracting any sales promotion, marketing...

The IPS supported employment learning collaborative.

PubMed

Becker, Deborah R; Drake, Robert E; Bond, Gary R

2014-06-01

Learning collaboratives aim to improve the quality and outcomes of health care. This paper updates the Johnson & Johnson-Dartmouth Community Mental Health Program, a 12-year learning collaborative on supported employment for people with mental illness. We gathered data from quarterly employment reports, monthly Individual Placement and Support (IPS) meetings, and presentations at the 2013 annual meeting of the learning collaborative. The number of participant states or regions (and sites within these jurisdictions) was expanded to 16 jurisdictions in the United States and 3 in European countries. The quarterly rate of competitive employment has averaged 43% over 11 years in the U.S. sites. The collaborative has spawned numerous interactions, trainings, innovations, and research projects. Long-term learning collaboratives can produce high quality services, good outcomes, sustainability, and innovation.

The impact of a continuing education programme on the adoption of nickel-titanium rotary instrumentation and root-filling quality amongst a group of Swedish general dental practitioners.

PubMed

Dahlström, L; Molander, A; Reit, C

2015-02-01

The aim of the study was to test the hypothesis that a further education programme relating to nickel-titanium rotary instrumentation (NTRI), with the concurrent activation of social/professional networks amongst all general dental practitioners (GDPs) in a public dental service in Sweden, would increase the adoption rate and improve root-filling quality. To activate the networks, the GDPs at the 25 clinics elected training coaches from amongst themselves. The coaches were educated by a specialist and were then free to organise and conduct the training of the local GDPs. However, collective hands-on training and discussions were mandatory. Lectures were held by an endodontist. The rate of adoption and root-filling quality was evaluated just before and 6 months after the education. Statistical tests were performed with chi-square using a 95% confidence interval. Nickel-titanium rotary instrumentation was adopted by 88%. Excellent root fillings (score 1) increased from 45% to 59% (P = 0.003). The rate of poor-quality root fillings (score 4 and score 5) was not affected. The quality ratio (score 1/score 5) increased from 5.36 (118/22) to 9.5 (133/14). Eleven dentists (17%) at nine different clinics produced 49% of the poor-quality root fillings (score 4 and score 5). Seventy-three per cent of these dentists stated that they had adopted NTRI. The introduction of NTRI will increase the adoption rate and the frequency of good-quality root fillings. However, it will not overcome the problems associated with dentists producing a low-quality level, even if a local professional network is activated. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Edge-illumination x-ray phase contrast imaging with Pt-based metallic glass masks

NASA Astrophysics Data System (ADS)

Saghamanesh, Somayeh; Aghamiri, Seyed Mahmoud-Reza; Olivo, Alessandro; Sadeghilarijani, Maryam; Kato, Hidemi; Kamali-Asl, Alireza; Yashiro, Wataru

2017-06-01

Edge-illumination x-ray phase contrast imaging (EI XPCI) is a non-interferometric phase-sensitive method where two absorption masks are employed. These masks are fabricated through a photolithography process followed by electroplating which is challenging in terms of yield as well as time- and cost-effectiveness. We report on the first implementation of EI XPCI with Pt-based metallic glass masks fabricated by an imprinting method. The new tested alloy exhibits good characteristics including high workability beside high x-ray attenuation. The fabrication process is easy and cheap, and can produce large-size masks for high x-ray energies within minutes. Imaging experiments show a good quality phase image, which confirms the potential of these masks to make the EI XPCI technique widely available and affordable.

A scalable method for the production of high-titer and high-quality adeno-associated type 9 vectors using the HSV platform

PubMed Central

Adamson-Small, Laura; Potter, Mark; Falk, Darin J; Cleaver, Brian; Byrne, Barry J; Clément, Nathalie

2016-01-01

Recombinant adeno-associated vectors based on serotype 9 (rAAV9) have demonstrated highly effective gene transfer in multiple animal models of muscular dystrophies and other neurological indications. Current limitations in vector production and purification have hampered widespread implementation of clinical candidate vectors, particularly when systemic administration is considered. In this study, we describe a complete herpes simplex virus (HSV)-based production and purification process capable of generating greater than 1 × 1014 rAAV9 vector genomes per 10-layer CellSTACK of HEK 293 producer cells, or greater than 1 × 105 vector genome per cell, in a final, fully purified product. This represents a 5- to 10-fold increase over transfection-based methods. In addition, rAAV vectors produced by this method demonstrated improved biological characteristics when compared to transfection-based production, including increased infectivity as shown by higher transducing unit-to-vector genome ratios and decreased total capsid protein amounts, shown by lower empty-to-full ratios. Together, this data establishes a significant improvement in both rAAV9 yields and vector quality. Further, the method can be readily adapted to large-scale good laboratory practice (GLP) and good manufacturing practice (GMP) production of rAAV9 vectors to enable preclinical and clinical studies and provide a platform to build on toward late-phases and commercial production. PMID:27222839

Marketing complementary foods and supplements in Burkina Faso, Madagascar, and Vietnam: lessons learned from the Nutridev program.

PubMed

Bruyeron, Olivier; Denizeau, Mirrdyn; Berger, Jacques; Trèche, Serge

2010-06-01

Sustainable approaches to improving infant and young child feeding are needed. The Nutridev program worked in Vietnam, Madagascar, and Burkina Faso to test different strategies to improve complementary feeding using fortified products sold to families. To review the experiences of programs producing and marketing fortified complementary foods and to report on the feasibility of local production and marketing of fortified complementary foods to increase usage of high-quality foods among children of low-income families in a self-sustaining manner. Project documents, surveys of mothers, and production and sales reports were reviewed. Nutridev experience in Vietnam, Madagascar, and Burkina Faso demonstrates that it is possible to produce affordable, high-quality complementary foods and supplements locally in developing countries. Strategies to make products readily available to the targeted population and to convince this population to consume them yielded mixed results, varying greatly based on the strategy utilized and the context in which it was implemented. In several contexts, the optimal approach appears to be strengthening the existing food distribution network to sell complementary foods and supplements, with the implementation of a temporary promotion and nutrition education network in partnership with local authorities (e.g., health services) to increase awareness among families about the fortified complementary food product and optimal feeding practices. In urban areas, where the density of the population is high, design and implementation of specific networks very close to consumers seems to be a good way to combine economic sustainability and good consumption levels.

Harmonization of good laboratory practice requirements and laboratory accreditation programs.

PubMed

Royal, P D

1994-09-01

Efforts to harmonize Good Laboratory Practice (GLP) requirements have been underway through the Organization for Economic Cooperation and Development (OECD) since 1981. In 1985, a GLP panel was established to facilitate the practical implementation of the OECD/GLP program. Through the OECD/GLP program, Memoranda of Understanding (MOU) agreements which foster requirements for reciprocal data and study acceptance and unified GLP standards have been developed among member countries. Three OECD Consensus Workshops and three inspectors training workshops have been held. In concert with these efforts, several OECD countries have developed GLP accreditation programs, managed by local health and environmental ministries. In addition, Canada and the United States are investigating Laboratory Accreditation programs for environmental monitoring assessment and GLP-regulated studies. In the European Community (EC), the need for quality standards specifying requirements for production and international trade has promoted International Standards Organization (ISO) certification for certain products. ISO-9000 standards identify requirements for certification of quality systems. These certification programs may affect the trade and market of laboratories conducting GLP studies. Two goals identified by these efforts are common to both programs: first, harmonization and recognition of requirements, and second, confidence in the rigor of program components used to assess the integrity of data produced and study activities. This confidence can be promoted, in part, through laboratory inspection and screening processes. However, the question remains, will data produced by sanctioned laboratories be mutually accepted on an international basis?(ABSTRACT TRUNCATED AT 250 WORDS)

Study of structural and optical properties of YAG and Nd:YAG single crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostić, S.; Lazarević, Z.Ž., E-mail: lzorica@yahoo.com; Radojević, V.

2015-03-15

Highlights: • Transparent YAG and pale pink Nd:YAG single crystals were produced by the Czochralski technique. • Growth mechanisms and shape of the liquid/solid interface and incorporation of Nd{sup 3+} were studied. • The structure of the crystals was investigated by X-ray diffraction, Raman and IR spectroscopy. • The 15 Raman and 17 IR modes were observed. • The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. - Abstract: Yttrium aluminum garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) and yttrium aluminum garnet doped with neodymium (Nd:YAG) single crystals were grown by the Czochralski technique. Themore » critical diameter and the critical rate of rotation were calculated. Suitable polishing and etching solutions were determined. As a result of our experiments, the transparent YAG and pale pink Nd:YAG single crystals were produced. The obtained crystals were studied by X-ray diffraction, Raman and IR spectroscopy. The crystal structure was confirmed by XRD. The 15 Raman and 17 IR modes were observed. The Raman and IR spectroscopy results are in accordance with X-ray diffraction analysis. The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. The absence of a core was confirmed by viewing polished crystal slices. Also, it is important to emphasize that the obtained Nd:YAG single crystal has a concentration of 0.8 wt.% Nd{sup 3+} that is characteristic for laser materials.« less

Gallium phosphide high temperature diodes

NASA Technical Reports Server (NTRS)

Chaffin, R. J.; Dawson, L. R.

1981-01-01

High temperature (300 C) diodes for geothermal and other energy applications were developed. A comparison of reverse leakage currents of Si, GaAs, and GaP was made. Diodes made from GaP should be usable to 500 C. A Liquid Phase Epitaxy (LPE) process for producing high quality, grown junction GaP diodes is described. This process uses low vapor pressure Mg as a dopant which allows multiple boat growth in the same LPE run. These LPE wafers were cut into die and metallized to make the diodes. These diodes produce leakage currents below ten to the -9th power A/sq cm at 400 C while exhibiting good high temperature rectification characteristics. High temperature life test data is presented which shows exceptional stability of the V-I characteristics.

Validation of national land-cover characteristics data for regional water-quality assessment

USGS Publications Warehouse

Zelt, Ronald B.; Brown, Jesslyn F.; Kelley, M.S.

1995-01-01

Land-cover information is used routinely to support the interpretation of water-quality data. The Prototype 1990 Conterminous US Land Cover Characteristics Data Set, developed primarily from Advanced Very High Resolution Radiometer (AVHRR) data, was made available to the US Geological Survey's National Water-Quality Assessment (NAWQA) Program. The study described in this paper explored the utility of the 1990 national data set for developing quantitative estimates of the areal extent of principal land-cover types within large areal units. Land-cover data were collected in 1993 at 210 sites in the Central Nebraska Basins, one of the NAWQA study units. Median percentage-corn estimates for each sampling stratum wre used to produce areally weighted estimates of the percentage-corn cover for hydrologic units. Comparison of those areal estimates with an independent source of 1992 land-cover data showed good agreement. -Authors

Critical Issues That Need to Be Addressed to Improve Outcomes for Patients With Carotid Stenosis.

PubMed

Abbott, Anne

2016-05-01

Significant improvement in outcomes for patients with carotid stenosis requires liberation from the historic fixation with randomization and a procedurally based, late-stage, reactive approach to medical care. We require a multipronged and multidisciplinary approach that includes all of the following: (i) removal of overreliance on, and biased use of, randomized trial data; (ii) using accurate ways to rank evidence quality and relevance; (iii) improved research reporting standards; (iv) building quality assurance and other research capability into routine practice; (v) producing evidence-true rather than evidence-based guidelines; (vi) bringing current optimal medical treatment to the community and measuring its effectiveness; (vii) funding only interventions known to help patients when and where they are treated and use the savings to fund vital research, including quality assurance in routine practice; and (viii) recognize that making the indication for carotid procedures obsolete is a good thing. © The Author(s) 2016.

Hole Quality Assessment in Drilling of Glass Microballoon/Epoxy Syntactic Foams

NASA Astrophysics Data System (ADS)

Ashrith, H. S.; Doddamani, Mrityunjay; Gaitonde, Vinayak; Gupta, Nikhil

2018-05-01

Syntactic foams reinforced with glass microballoons are used as alternatives for conventional materials in structural application of aircrafts and automobiles due to their unique properties such as light weight, high compressive strength, and low moisture absorption. Drilling is the most commonly used process of making holes for assembling structural components. In the present investigation, grey relation analysis (GRA) is used to optimize cutting speed, feed, drill diameter, and filler content to minimize cylindricity, circularity error, and damage factor. Experiments based on full factorial design are conducted using a vertical computer numerical control machine and tungsten carbide twist drills. GRA reveals that a combination of lower cutting speed, filler content, and drill diameter produces a good quality hole at optimum intermediate feed in drilling syntactic foams composites. GRA also shows that the drill diameter has a significant effect on the hole quality. Furthermore, damage on the hole exit side is analyzed using a scanning electron microscope.

Luxury for the masses.

PubMed

Silverstein, Michael J; Fiske, Neil

2003-04-01

Increasingly wide income disparities, higher levels of education, and greater awareness of other cultures' ideas of the good life have given rise to a new class of American consumer. And a new category of products and services, including automobiles, apparel, food, wine, and spirits, has sprung into being to cater to it. That category is called new luxury. America's middle-market consumers are trading up to higher levels of quality and taste than ever before. Members of the middle market (those earning $50,000 and above annually) collectively have around $1 trillion of disposable income. And they will pay premiums of 20% to 200% for well-designed, well-engineered, and well-crafted goods that can't be found in the mass middle market and that have the artisanal touches of traditional luxury items. Most important, even when they address basic necessities, such goods evoke and engage consumers' emotions while feeding their aspirations for a better life. Supply-side forces are essential to the rise of new luxury. Like the consumers of their goods, entrepreneurs are better educated and more sophisticated about their customers than ever before. In addition, global sourcing, falling trade barriers and transportation costs, and rising offshore manufacturing standards are making possible the economical production of alluring products of high quality. Unlike old-luxury goods, new-luxury products can generate high sales volumes despite their relatively high prices. As a result, new-luxury companies are achieving levels of profitability and growth beyond the reach of their conventional competitors. Whether the item in question is a $6 Panera sandwich or a $30,000 Mercedes, new luxury is a formula that middle-market companies, facing erosion of their market share by high-end and low-end producers, can ill afford to ignore.

Quality and Quantity of Sorghum Hydroponic Fodder from Different Varieties and Harvest Time

NASA Astrophysics Data System (ADS)

Chrisdiana, R.

2018-02-01

This experiment was designed to compare different varieties and harvest time of sorghum hydroponic fodder based on nutrient content and biomass production. Experimental design for fodder productivity was completely randomized design with 2 x 3 factorial, i.e., sorghum varieties (KD 4 and Super-1) and time of harvesting the sorghum hydroponic fodder (8,12 and 16 d). Total biomass and DM production, were affected significantly (p<0.05) on harvest time. Total biomass and nutrient content were increased in longer harvest time. The nutrient content were increased with decreasing total value of DM. Super-1 varieties produce larger biomass and nutrient content higher than KD4 (p<0.05). Based on sorghum hidroponic fodder quality and quantity, sorghum hidroponic fodder with Super-1 varieties harvested at 12 d had a good quality of fodder and it can be alternative of technology providing quality forage and land saving with a short time planting period and continous production.

Qualities of a good Singaporean psychiatrist: Qualitative differences between psychiatrists and patients.

PubMed

Tor, Phern-Chern; Tan, Jacinta O A

2015-06-01

Pilot studies in Singapore established four themes (personal values, professional, relationship, academic-executive) relating to the qualities of a good psychiatrist, and suggested potential differences of opinion between patients and psychiatrists. We sought to explore differences between patients and psychiatrists regarding the qualities of a good psychiatrist. Qualitative analysis of interviews using a modified grounded theory approach with 21 voluntary psychiatric inpatients and 18 psychiatrists. One hundred thirty-one separate qualities emerged from the data. The qualities of a good psychiatrist were viewed in the context of motivations, functions, methods, and results obtained, mirroring the themes established in the pilot studies. Patients and psychiatrists mostly concurred on the qualities of a good psychiatrist, with 62.6% of the qualities emerging from both groups. However significant differences existed. Patient-specific qualities included proof of altruistic motives, diligence, clinical competence, and positive results. What the psychiatrist represented to patients in relation to gender, culture, and clinical prestige also mattered to patients. Psychiatrist-specific qualities related to societal (e.g. public protection) and professional concerns (e.g. boundary issues). The results of this study demonstrate that patients and psychiatrists have different views about the qualities of a good psychiatrist. Patients may expect proof of care, diligence, and competence from the psychiatrist, along with positive results. In addition, psychiatrists should be mindful of what they represent to patients and how that can impact the doctor-patient relationship. © 2014 Wiley Publishing Asia Pty Ltd.

19 CFR 10.915 - Regional value content.

Code of Federal Regulations, 2014 CFR

2014-04-01

... good. (d) Special rule for certain automotive goods. (1) General. Where General Note 32(n), HTSUS, sets forth a rule that specifies a regional value content test for an automotive good provided for in any of... the total cost incurred with respect to all goods produced by the producer of the automotive good...

19 CFR 10.915 - Regional value content.

Code of Federal Regulations, 2013 CFR

2013-04-01

... good. (d) Special rule for certain automotive goods. (1) General. Where General Note 32(n), HTSUS, sets forth a rule that specifies a regional value content test for an automotive good provided for in any of... the total cost incurred with respect to all goods produced by the producer of the automotive good...

19 CFR 10.915 - Regional value content.

Code of Federal Regulations, 2012 CFR

2012-04-01

... good. (d) Special rule for certain automotive goods. (1) General. Where General Note 32(n), HTSUS, sets forth a rule that specifies a regional value content test for an automotive good provided for in any of... the total cost incurred with respect to all goods produced by the producer of the automotive good...

Carcass and Meat Quality Pelung Sentul Kampung Broiler Crossbreed Chicken

NASA Astrophysics Data System (ADS)

Darwati, S.; Afnan, R.; Prabowo, S.; Nurcahya, H.

2018-01-01

Crossbreed chicken of pelung sentul kampung broiler (PSKR) has good growth and ready to slaughter at the age of 10 weeks. So, it has potential as a local chicken for meat producers. Potential of PSKR crossbreed chicken need to know about the percentage of carcass and the physical quality of meat for holistic information. This study aimed to evaluate the carcass and the quality of the physical meat of pelung sentul kampung broiler chicken (PSKR). Material of 12 chickens PSKR 12 weeks unsexing were used and observed for the percentage of carcass in the chest, upper and lower thighs and physical quality of breast meat included pH, water-binding power, cooking impurities, and tenderness. Chickens fed 100% commercial feed for broiler chicken phase starter until age 3 weeks, then gradually added rice bran and age > 5 weeks fed 60% commercial feed plus 40% rice bran. Chicken is slaughter at 12 weeks of age. The data obtained are presented descriptively. Percentage of PSKR carcass was 68%, chest was 27.17%, upper thigh was 17.12%, lower thigh was 16.64% respectively. Physical quality of breast meat has a pH performance of 5.30,% mgH2O of 28.08%, cooking loss of 29.13%, and tenderness of 2.63 respectively. PSKR chicken had potential for meat producers based on carcass percentage with chest meat was very tender because the genetic of broiler in PSKR as much as 25%.

Application of numerical grid generation for improved CFD analysis of multiphase screw machines

NASA Astrophysics Data System (ADS)

Rane, S.; Kovačević, A.

2017-08-01

Algebraic grid generation is widely used for discretization of the working domain of twin screw machines. Algebraic grid generation is fast and has good control over the placement of grid nodes. However, the desired qualities of grid which should be able to handle multiphase flows such as oil injection, may be difficult to achieve at times. In order to obtain fast solution of multiphase screw machines, it is important to further improve the quality and robustness of the computational grid. In this paper, a deforming grid of a twin screw machine is generated using algebraic transfinite interpolation to produce initial mesh upon which an elliptic partial differential equations (PDE) of the Poisson’s form is solved numerically to produce smooth final computational mesh. The quality of numerical cells and their distribution obtained by the differential method is greatly improved. In addition, a similar procedure was introduced to fully smoothen the transition of the partitioning rack curve between the rotors thus improving continuous movement of grid nodes and in turn improve robustness and speed of the Computational Fluid Dynamic (CFD) solver. Analysis of an oil injected twin screw compressor is presented to compare the improvements in grid quality factors in the regions of importance such as interlobe space, radial tip and the core of the rotor. The proposed method that combines algebraic and differential grid generation offer significant improvement in grid quality and robustness of numerical solution.

The aerospace plane design challenge: Credible computational fluid dynamics results

NASA Technical Reports Server (NTRS)

Mehta, Unmeel B.

1990-01-01

Computational fluid dynamics (CFD) is necessary in the design processes of all current aerospace plane programs. Single-stage-to-orbit (STTO) aerospace planes with air-breathing supersonic combustion are going to be largely designed by means of CFD. The challenge of the aerospace plane design is to provide credible CFD results to work from, to assess the risk associated with the use of those results, and to certify CFD codes that produce credible results. To establish the credibility of CFD results used in design, the following topics are discussed: CFD validation vis-a-vis measurable fluid dynamics (MFD) validation; responsibility for credibility; credibility requirement; and a guide for establishing credibility. Quantification of CFD uncertainties helps to assess success risk and safety risks, and the development of CFD as a design tool requires code certification. This challenge is managed by designing the designers to use CFD effectively, by ensuring quality control, and by balancing the design process. For designing the designers, the following topics are discussed: how CFD design technology is developed; the reasons Japanese companies, by and large, produce goods of higher quality than the U.S. counterparts; teamwork as a new way of doing business; and how ideas, quality, and teaming can be brought together. Quality control for reducing the loss imparted to the society begins with the quality of the CFD results used in the design process, and balancing the design process means using a judicious balance of CFD and MFD.

Pansharpening in coastal ecosystems using Worldview-2 imagery

NASA Astrophysics Data System (ADS)

Ibarrola-Ulzurrun, Edurne; Marcello-Ruiz, Javier; Gonzalo-Martin, Consuelo

2016-10-01

Both climate change and anthropogenic pressure impacts are producing a declining in ecosystem natural resources. In this work, a vulnerable coastal ecosystem, Maspalomas Natural Reserve (Canary Islands, Spain), is analyzed. The development of advanced image processing techniques, applied to new satellites with very high resolution sensors (VHR), are essential to obtain accurate and systematic information about such natural areas. Thus, remote sensing offers a practical and cost-effective means for a good environmental management although some improvements are needed by the application of pansharpening techniques. A preliminary assessment was performed selecting classical and new algorithms that could achieve good performance with WorldView-2 imagery. Moreover, different quality indices were used in order to asses which pansharpening technique gives a better fused image. A total of 7 pansharpening algorithms were analyzed using 6 spectral and spatial quality indices. The quality assessment was implemented for the whole set of multispectral bands and for those bands covered by the wavelength range of the panchromatic image and outside of it. After an extensive evaluation, the most suitable algorithm was the Weighted Wavelet `à trous' through Fractal Dimension Maps technique which provided the best compromise between the spectral and spatial quality for the image. Finally, Quality Map Analysis was performed in order to study the fusion in each band at local level. As conclusion, novel analysis has been conducted covering the evaluation of fusion methods in shallow water areas. Hence, the excellent results provided by this study have been applied to the generation of challenging thematic maps of coastal and dunes protected areas.

The sperm of aging male bustards retards their offspring's development.

PubMed

Preston, Brian T; Saint Jalme, Michel; Hingrat, Yves; Lacroix, Frederic; Sorci, Gabriele

2015-02-03

Understanding whether the sperm of older males has a diminished capacity to produce successful offspring is a key challenge in evolutionary biology. We investigate this issue using 10 years of reproductive data on captive long-lived houbara bustards (Chlamydotis undulata), where the use of artificial insemination techniques means parents can only influence offspring quality via their gametes. Here we show that paternal aging reduces both the likelihood that eggs hatch and the rate at which chicks grow, with older males producing the lightest offspring after the first month. Surprisingly, this cost of paternal aging on offspring development is of a similar scale to that associated with maternal aging. Fitting with predictions on germline aging, the sperm of immature males produce the fastest growing offspring. Our findings thus indicate that any good genes benefit that might be offered by older 'proven' males will be eroded by aging of their germline DNA.

Schlieren technique in soap film flows

NASA Astrophysics Data System (ADS)

Auliel, M. I.; Hebrero, F. Castro; Sosa, R.; Artana, G.

2017-05-01

We propose the use of the Schlieren technique as a tool to analyse the flows in soap film tunnels. The technique enables to visualize perturbations of the film produced by the interposition of an object in the flow. The variations of intensity of the image are produced as a consequence of the deviations of the light beam traversing the deformed surfaces of the film. The quality of the Schlieren image is compared to images produced by the conventional interferometric technique. The analysis of Schlieren images of a cylinder wake flow indicates that this technique enables an easy visualization of vortex centers. Post-processing of series of two successive images of a grid turbulent flow with a dense motion estimator is used to derive the velocity fields. The results obtained with this self-seeded flow show good agreement with the statistical properties of the 2D turbulent flows reported on the literature.

Development of Portable Venturi Kiln for Agricultural Waste Utilization by Carbonization Process

NASA Astrophysics Data System (ADS)

Agustina, S. E.; Chasanah, N.; Eris, A. P.

2018-05-01

Many types of kiln or carbonization equipment have been developed, but most of them were designed for big capacity and some also having low performance. This research aims to develop kiln, especially portable metal kiln, which has higher performance, more environmental- friendly, and can be used for several kinds of biomass or agricultural waste (not exclusive for one kind of biomass) as feeding material. To improve the kiln performance, a venturi drum type of portable kiln has been designed with an optimum capacity of 12.45 kg coconut shells. Basic idea of those design is heat flow improvement causing by venturi effect. The performance test for coconut shell carbonization shows that the carbonization process takes about 60-90 minutes to produce average yields of 23.8%., and the highest temperature of the process was 441 °C. The optimum performance has been achieved in the 4th test, which was producing 24% yield of highest charcoal quality (represented by LHV) in 65 minutes process at average temperature level 485 °C. For pecan shell and palm shell, design modification has been done by adding 6 air inlet holes and 3 ignition column to get better performance. While operation procedure should be modified on loading and air supply, depending on each biomass characteristic. The result of performance test showed that carbonization process of pecan shell produce 17 % yield, and palm shell produce 15% yield. Based on Indonesian Standard (SNI), all charcoal produced in those carbonization has good quality level.

BioGraphene: Direct Exfoliation of Graphite in a Kitchen Blender for Enzymology Applications.

PubMed

Kumar, C V; Pattammattel, A

2016-01-01

A high yielding method for the aqueous exfoliation of graphite crystals to produce high quality graphene nanosheets in a kitchen blender is described here. Bovine serum albumin (BSA), β-lactoglobulin, ovalbumin, lysozyme, and hemoglobin as well as calf serum were used for the exfoliation of graphene. Among these, BSA gave the maximum exfoliation efficiency, exceeding 4mgmL(-1)h(-1) of graphene. Quality of graphene produced was examined by Raman spectroscopy, which indicated 3-5 layer graphene of very high quality and very low levels of defects. Transmission electron microscopy indicated an average size of ~0.5μm flakes. The graphene/BSA dispersions were stable over pH 3.0-11, and at 5°C or 50°C, for more than 2 months. Current approach gave higher rates of BSA/graphene (BioGraphene) in better yields than other methods. Calf serum, when used in place of BSA, also gave high yields of good quality BioGraphene and these preparations may be of direct use for cell culture studies. A simple example of BioGraphene preparation is described that can be adapted in most laboratories, and graphene-adsorbed glucose oxidase is nearly as active as the free enzyme. Current approach may facilitate large-scale production of graphene in most laboratories around the world and it may open new opportunities for biological applications of graphene. © 2016 Elsevier Inc. All rights reserved.

What makes British general practitioners take part in a quality improvement scheme?

PubMed

Spooner, A; Chapple, A; Roland, M

2001-07-01

To understand the reasons for the apparent success of a quality improvement scheme designed to produce widespread changes in chronic disease management in primary care. Purposeful sample of 36 primary care staff, managers and specialists. Qualitative analysis of 27 interviews in East Kent Health Authority area, where, over a three-year period, more than three-quarters of general practitioners (GPs) and enrolled in a quality improvement programme which required them to meet challenging chronic disease management targets (PRImary Care Clinical Effectiveness--PRICCE). Major changes in clinical practice appeared to have taken place as a result of participation in PRICCE. The scheme was significantly dependent on leadership from the health authority and on local professional support. Factors that motivated GPs to take part in the project included: a desire to improve patient care; financial incentives; maintenance of professional autonomy in how to reach the targets; maintenance of professional pride; and peer pressure. Good teamworking was essential to successful completion of the project and often improved as a result of taking part. The scheme included a combination of interventions known to be effective in producing professional behavioural change. When managerial vision is aligned to professional values, and combined with a range of interventions known to influence professional behaviour including financial incentives, substantial changes in clinical practice can result. Lessons are drawn for future quality improvement programmes in the National Health Service.

Designing Process Improvement of Finished Good On Time Release and Performance Indicator Tool in Milk Industry Using Business Process Reengineering Method

NASA Astrophysics Data System (ADS)

Dachyar, M.; Christy, E.

2014-04-01

To maintain position as a major milk producer, the Indonesian milk industry should do some business development with the purpose of increasing customer service level. One strategy is to create on time release conditions for finished goods which will be distributed to customers and distributors. To achieve this condition, management information systems of finished goods on time release needs to be improved. The focus of this research is to conduct business process improvement using Business Process Reengineering (BPR). The deliverable key of this study is a comprehensive business strategy which is the solution of the root problems. To achieve the goal, evaluation, reengineering, and improvement of the ERP system are conducted. To visualize the predicted implementation, a simulation model is built by Oracle BPM. The output of this simulation showed that the proposed solution could effectively reduce the process lead time and increase the number of quality releases.

Physical evaluations of Co-Cr-Mo parts processed using different additive manufacturing techniques

NASA Astrophysics Data System (ADS)

Ghani, Saiful Anwar Che; Mohamed, Siti Rohaida; Harun, Wan Sharuzi Wan; Noar, Nor Aida Zuraimi Md

2017-12-01

In recent years, additive manufacturing with highly design customization has gained an important technique for fabrication in aerospace and medical fields. Despite the ability of the process to produce complex components with highly controlled architecture geometrical features, maintaining the part's accuracy, ability to fabricate fully functional high density components and inferior surfaces quality are the major obstacles in producing final parts using additive manufacturing for any selected application. This study aims to evaluate the physical properties of cobalt chrome molybdenum (Co-Cr-Mo) alloys parts fabricated by different additive manufacturing techniques. The full dense Co-Cr-Mo parts were produced by Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) with default process parameters. The density and relative density of samples were calculated using Archimedes' principle while the surface roughness on the top and side surface was measured using surface profiler. The roughness average (Ra) for top surface for SLM produced parts is 3.4 µm while 2.83 µm for DMLS produced parts. The Ra for side surfaces for SLM produced parts is 4.57 µm while 9.0 µm for DMLS produced parts. The higher Ra values on side surfaces compared to the top faces for both manufacturing techniques was due to the balling effect phenomenon. The yield relative density for both Co-Cr-Mo parts produced by SLM and DMLS are 99.3%. Higher energy density has influence the higher density of produced samples by SLM and DMLS processes. The findings of this work demonstrated that SLM and DMLS process with default process parameters have effectively produced full dense parts of Co-Cr-Mo with high density, good agreement of geometrical accuracy and better surface finish. Despite of both manufacturing process yield that produced components with higher density, the current finding shows that SLM technique could produce components with smoother surface quality compared to DMLS process with default parameters.

The quality assessment of radial and tangential neutron radiography beamlines of TRR

NASA Astrophysics Data System (ADS)

Choopan Dastjerdi, M. H.; Movafeghi, A.; Khalafi, H.; Kasesaz, Y.

2017-07-01

To achieve a quality neutron radiographic image in a relatively short exposure time, the neutron radiography beam must be of good quality and relatively high neutron flux. Characterization of a neutron radiography beam, such as determination of the image quality and the neutron flux, is vital for producing quality radiographic images and also provides a means to compare the quality of different neutron radiography facilities. This paper provides a characterization of the radial and tangential neutron radiography beamlines at the Tehran research reactor. This work includes determination of the facilities category according to the American Society for Testing and Materials (ASTM) standards, and also uses the gold foils to determine the neutron beam flux. The radial neutron beam is a Category I neutron radiography facility, the highest possible quality level according to the ASTM. The tangential beam is a Category IV neutron radiography facility. Gold foil activation experiments show that the measured neutron flux for radial beamline with length-to-diameter ratio (L/D) =150 is 6.1× 106 n cm-2 s-1 and for tangential beamline with (L/D)=115 is 2.4× 104 n cm-2 s-1.

How I do it: feasibility of a new ultrasound probe fixator to facilitate high quality stress echocardiography.

PubMed

Salden, O A E; van Everdingen, W M; Spee, R; Doevendans, P A; Cramer, M J

2018-03-27

Stress echocardiography (SE) has recently regained momentum as an important diagnostic tool for the assessment of both ischemic and non-ischemic heart disease. Performing SE during physical exercise is challenging due to a suboptimal patient position and vigorous movements of the patient's chest. This hampers a stable ultrasound position and reduces the diagnostic performance of SE. A stable ultrasound probe position would facilitate producing high quality images during continuous measurements. With Probefix (Usono, Eindhoven, The Netherlands), a newly developed tool to fixate the ultrasound probe to the patient's chest, stabilization of the probe during physical exercise is possible. The technique of SE with the Probefix and its' feasibility are evaluated in a small pilot study. Probefix fixates the ultrasound probe to the patient's chest, using two chest straps and a fixation device. The ultrasound probe position and angle may be altered with a relative high degree of freedom. We tested the Probefix for continuous echocardiographic imaging in 12 study subjects during supine and upright ergometer stress tests. One patient was unable to perform exercise and in two study subjects good quality images were not achieved. In the other patients (82%) a stable probe position was obtained, with subsequent good quality echocardiographic images during SE. We have demonstrated the feasibility of the Probefix support during ergometer tests in supine and upright positions and conclude that this external fixator may facilitate continuous monitoring of cardiac function in a group of patients.

Rocking curve imaging of high quality sapphire crystals in backscattering geometry

DOE PAGES

Jafari, A.; European Synchrotron Radiation Facility; Univ. of Liege,; ...

2017-01-23

Here, we report on the characterization of high quality sapphire single crystals suitable for high-resolution X-ray optics at high energy. Investigations using rocking curve imaging reveal the crystals to be of uniformly good quality at the level of ~10 -4 in lattice parameter variations, deltad/d. But, investigations using backscattering rocking curve imaging with lattice spacing resolution of deltad/d ~ 5.10 -8 shows very diverse quality maps for all crystals. Our results highlight nearly ideal areas with edge length of 0.2-0.5 mm in most crystals, but a comparison of the back re ection peak positions shows that even neighboring ideal areasmore » exhibit a relative difference in the lattice parameters on the order of deltad/d = 10-20.10 -8; this is several times larger than the rocking curve width. Furthermore, the stress-strain analysis suggests that an extremely stringent limit on the strain at a level of ~100 kPa in the growth process is required in order to produce crystals with large areas of the quality required for X-ray optics at high energy.« less

[Ecological regionalization of national cotton fiber quality in China using GGE biplot analysis method].

PubMed

Xu, Nai Yin; Jin, Shi Qiao; Li, Jian

2017-01-01

The distinctive regional characteristics of cotton fiber quality in the major cotton-producing areas in China enhance the textile use efficiency of raw cotton yarn by improving fiber quality through ecological regionalization. The "environment vs. trait" GGE biplot analysis method was adopted to explore the interaction between conventional cotton sub-regions and cotton fiber quality traits based on the datasets collected from the national cotton regional trials from 2011 to 2015. The results showed that the major cotton-producing area in China were divided into four fiber quality ecological regions, namely, the "high fiber quality ecological region", the "low micronaire ecological region", the "high fiber strength and micronaire ecological region", and the "moderate fiber quality ecological region". The high fiber quality ecological region was characterized by harmonious development of cotton fiber length, strength, micronaire value and the highest spinning consistency index, and located in the conventional cotton regions in the upper and lower reaches of Yangtze River Valley. The low micronaire value ecological region composed of the northern and south Xinjiang cotton regions was characterized by low micronaire value, relatively lower fiber strength, and relatively high spinning consistency index performance. The high fiber strength and micronaire value ecological region covered the middle reaches of Yangtze River Valley, Nanxiang Basin and Huaibei Plain, and was prominently characterized by high strength and micronaire value, and moderate performance of other traits. The moderate fiber quality ecological region included North China Plain and Loess Plateau cotton growing regions in the Yellow River Valley, and was characterized by moderate or lower performances of all fiber quality traits. This study effectively applied "environment vs. trait" GGE biplot to regionalize cotton fiber quality, which provided a helpful reference for the regiona-lized cotton growing regions in terms of optimal raw fiber production for textile industry, and gave a good example for the implementation of similar ecological regionalization of other crops as well.

Discectomy-related information on the internet: does the quality follow the surge?

PubMed

Elhassan, Yahya; Sheridan, Gerard; Nassiri, Mujtaba; Osman, Mugtaba; Kiely, Pat; Noel, Jacques

2015-01-15

A quality-control Internet-based study using recognized quality-scoring systems. To evaluate the quality of information available on the Internet. Quality of health information on the Internet is of much concern and the emphasis for appraisal of Internet Web sites is needed. This study is to determine if it has improved with the surge in Internet usage. The 3 most commonly used search engines were identified and a search for "Discectomy" was performed on each. Two reviewers categorized the Web sites according to their types and the quality of each was assessed using recognized scoring systems including the Journal of the American Medical Association (JAMA) benchmark, DISCERN score, and discectomy-specific content score. The quality of the information was also assessed according to the presence and absence of the Health on the Net code. Fifty-three Web sites were identified, and analyzed. Commercial Web sites were predominant, 24 of them were identified, 7 were governmental, 6 were produced by physicians, none were produced by allied health professionals, 3 were academic, 4 were public health information Web sites, 4 were attached to social media and discussion groups, 3 were related to media, and 2 were unspecified. Internet sites with a Health on the Net code demonstrated significantly higher quality than those without the code (P < 0.0001). Public health information Web sites attained the highest overall DISCERN and discectomy-specific scores followed by Web sites of the government and nonprofit organizations. The overall quality of information regarding discectomy remains poor and variable despite an exponential increase in the number of users and Web sites, with a slight trend toward improvement, only 20% to 30% are of good quality, compared with that 10 years ago (<10%). Presence of Health on the Net code is a very reliable marker for health information quality.

Using National Ambient Air Quality Standards for fine particulate matter to assess regional wildland fire smoke and air quality management.

PubMed

Schweizer, Don; Cisneros, Ricardo; Traina, Samuel; Ghezzehei, Teamrat A; Shaw, Glenn

2017-10-01

Wildland fire is an important ecological process in the California Sierra Nevada. Personal accounts from pre-20th century describe a much smokier environment than present day. The policy of suppression beginning in the early 20th century and climate change are contributing to increased megafires. We use a single particulate monitoring site at the wildland urban interface to explore impacts from prescribed, managed, and full suppression wildland fires from 2006 to 2015 producing a contextual assessment of smoke impacts over time at the landscape level. Prescribed fire had little effect on local fine particulate matter (PM 2.5 ) air quality with readings typical of similar non-fire times; hourly and daily good to moderate Air Quality Index (AQI) for PM 2.5 , maximum hourly concentrations 21-103 μg m -3 , and mean concentrations between 7.7 and 13.2 μg m -3 . Hourly and daily AQI was typically good or moderate during managed fires with 3 h and one day reaching unhealthy while the site remained below National Ambient Air Quality Standards (NAAQS), with maximum hourly concentrations 27-244 μg m -3 , and mean concentrations 6.7-11.7 μg m -3 . The large high intensity fire in this area created the highest short term impacts (AQI unhealthy for 4 h and very unhealthy for 1 h), 11 unhealthy for sensitive days, and produced the only annual value (43.9 μg m -3 ) over the NAAQS 98th percentile for PM 2.5 (35 μg m -3 ). Pinehurst remained below the federal standards for PM 2.5 when wildland fire in the local area was managed to 7800 ha (8-22% of the historic burn area). Considering air quality impacts from smoke using the NAAQS at a landscape level over time can give land and air managers a metric for broader evaluation of smoke impacts particularly when assessing ecologically beneficial fire. Allowing managers to control the amount and timing of individual wildland fire emissions can help lessen large smoke impacts to public health from a megafire. Published by Elsevier Ltd.

Data Processing of LAPAN-A3 Thermal Imager

NASA Astrophysics Data System (ADS)

Hartono, R.; Hakim, P. R.; Syafrudin, AH

2018-04-01

As an experimental microsatellite, LAPAN-A3/IPB satellite has an experimental thermal imager, which is called as micro-bolometer, to observe earth surface temperature for horizon observation. The imager data is transmitted from satellite to ground station by S-band video analog signal transmission, and then processed by ground station to become sequence of 8-bit enhanced and contrasted images. Data processing of LAPAN-A3/IPB thermal imager is more difficult than visual digital camera, especially for mosaic and classification purpose. This research aims to describe simple mosaic and classification process of LAPAN-A3/IPB thermal imager based on several videos data produced by the imager. The results show that stitching using Adobe Photoshop produces excellent result but can only process small area, while manual approach using ImageJ software can produce a good result but need a lot of works and time consuming. The mosaic process using image cross-correlation by Matlab offers alternative solution, which can process significantly bigger area in significantly shorter time processing. However, the quality produced is not as good as mosaic images of the other two methods. The simple classifying process that has been done shows that the thermal image can classify three distinct objects, i.e.: clouds, sea, and land surface. However, the algorithm fail to classify any other object which might be caused by distortions in the images. All of these results can be used as reference for development of thermal imager in LAPAN-A4 satellite.

Widely tunable gas laser for remote sensing

NASA Technical Reports Server (NTRS)

Rothe, D. E.

1988-01-01

An advanced, highly efficient and reliable Rare-Gas Halide laser was developed. It employs the following: (1) novel prepulse techniques and impedance matching for efficient energy transfer; (2) magnetic switches for high reliability; (3) x-ray preionization for discharge uniformity and beam quality; and (4) an integrated gas flow loop for compactness. When operated as a XeCl laser, the unit produces 2 J per pulse with good beam uniformity. Optical pulse duration is 100 ns. Pulse repetition rate was tested up to 25 Hz. Efficiency is 3 percent.

Tsukamoto fuzzy implementation to identify the pond water quality of koi

NASA Astrophysics Data System (ADS)

Qur'ania, A.; Verananda, D. I.

2017-01-01

The colour quality of koi was affected by the water quality in the pond. Koi fish have a diversity of types differentiated based on the body colour groups, such as one colour pattern, two colour patterns, three colours patterns and even more. Each colour characteristic of the koi have different handling, particularly in the handling of water quality, this is because the colour pigments in the body was affected by the composition of water quality include temperature, pH, TDS, do and salinity. The data of koi fish used were sanke, sowa, kohaku, shiro, yamabuki, ogon and chagoi. The aim of this study is to make an application to inform the condition of the pool water quality that can help breeders to know the water quality that will improve the handling strategies through water media. Tsukamoto Fuzzy method used to produce the three outputs namely water quality, water grade, and water conditions. The output of water quality consists of four categories, namely optimal, moderate, poor, and very poor. The output of water grade consists of grade A to D, while the output of water conditions consist of an excellent, good, bad, and very bad. Input to the application consists of five parameters, namely water temperature, pH, TDS, do and salinity.

How to run a successful Journal

PubMed Central

Jawaid, Shaukat Ali; Jawaid, Masood

2017-01-01

Publishing and successfully running a good quality peer reviewed biomedical scientific journal is not an easy task. Some of the pre-requisites include a competent experienced editor supported by a team. Long term sustainability of a journal will depend on good quality manuscripts, active editorial board, good quality of reviewers, workable business model to ensure financial support, increased visibility which will ensure increased submissions, indexation in various important databases, online availability and easy to use website. This manuscript outlines the logistics and technical issues which need to be resolved before starting a new journal and ensuring sustainability of a good quality peer reviewed journal. PMID:29492089

Urban farmers' markets: accessibility, offerings, and produce variety, quality, and price compared to nearby stores.

PubMed

Lucan, Sean C; Maroko, Andrew R; Sanon, Omar; Frias, Rafael; Schechter, Clyde B

2015-07-01

Most food-environment research has focused narrowly on select stores and restaurants. There has been comparatively less attention to non-storefront food sources like farmers' markets (FMs), particularly in urban communities. The objective of the present study was to assess FMs' potential contribution to an urban food environment in terms of specific foods offered, and compare FM accessibility as well as produce variety, quality, and price to that of nearby stores. Investigators conducted a detailed cross-sectional assessment of all FMs in Bronx County, NY, and of the nearest store(s) selling produce within a half-mile walking distance (up to two stores per FM). The study included 26 FMs and 44 stores. Investigators assessed accessibility (locations of FMs and stores relative to each other, and hours of operation for each), variety (the number and type of all food items offered at FMs and all fresh produce items offered at stores), quality (where produce items were grown and if they were organic), and price (including any sales prices or promotional discounts). Analyses included frequencies, proportions, and variable distributions, as well as mixed-effect regressions, paired t-tests, and signed rank tests to compare FMs to stores. Geographic information systems (GIS) allowed for mapping of FM and store locations and determining street-network distances between them. The mean distance between FMs and the nearest store selling fresh produce was 0.15 miles (range 0.02-0.36 miles). FMs were open substantially fewer months, days, and hours than stores. FMs offered 26.4 fewer fresh produce items on average than stores (p values <0.02). FM produce items were more frequently local and organic, but often tended toward less-common/more-exotic and heirloom varieties. FMs were more expensive on average (p values <0.001 for pairwise comparisons to stores) - even for more-commonplace and "conventional" produce - especially when discounts or sales prices were considered. Fully, 32.8% of what FMs offered was not fresh produce at all but refined or processed products (e.g., jams, pies, cakes, cookies, donuts, juice drinks). FMs may offer many items not optimal for good nutrition and health, and carry less-varied, less-common fresh produce in neighborhoods that already have access to stores with cheaper prices and overwhelmingly more hours of operation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Real-time computer treatment of THz passive device images with the high image quality

NASA Astrophysics Data System (ADS)

Trofimov, Vyacheslav A.; Trofimov, Vladislav V.

2012-06-01

We demonstrate real-time computer code improving significantly the quality of images captured by the passive THz imaging system. The code is not only designed for a THz passive device: it can be applied to any kind of such devices and active THz imaging systems as well. We applied our code for computer processing of images captured by four passive THz imaging devices manufactured by different companies. It should be stressed that computer processing of images produced by different companies requires using the different spatial filters usually. The performance of current version of the computer code is greater than one image per second for a THz image having more than 5000 pixels and 24 bit number representation. Processing of THz single image produces about 20 images simultaneously corresponding to various spatial filters. The computer code allows increasing the number of pixels for processed images without noticeable reduction of image quality. The performance of the computer code can be increased many times using parallel algorithms for processing the image. We develop original spatial filters which allow one to see objects with sizes less than 2 cm. The imagery is produced by passive THz imaging devices which captured the images of objects hidden under opaque clothes. For images with high noise we develop an approach which results in suppression of the noise after using the computer processing and we obtain the good quality image. With the aim of illustrating the efficiency of the developed approach we demonstrate the detection of the liquid explosive, ordinary explosive, knife, pistol, metal plate, CD, ceramics, chocolate and other objects hidden under opaque clothes. The results demonstrate the high efficiency of our approach for the detection of hidden objects and they are a very promising solution for the security problem.

Good-quality social care for people with Parkinson’s disease: a qualitative study

PubMed Central

Kennedy, Fiona; Stocks, Amanda-Jayne; McDonnell, Ann; Ramaswamy, Bhanu; Wood, Brendan; Whitfield, Malcolm

2016-01-01

Objectives The study examines the meaning of good-quality social care for people with Parkinson's disease and their carers. It identifies, from their perspective, the impact of good-quality social care on health and well-being. Design Qualitative case study methodology, interview and framework analysis techniques were used. Setting: community locations in the north and midlands of England. Participants Data were collected from 43 participants including individual interviews with people with Parkinson's disease (n=4), formal and informal social care providers (n=13), 2 focus groups, 1 with people with Parkinson's disease and their carers (n=17), and 1 with professionals (n=8), plus a telephone interview with a former commissioner. Findings Good-quality social care, delivered in a timely fashion, was reported to have a positive impact on health. Furthermore, there is an indication that good-quality social care can prevent untoward events, such as infections, symptom deterioration and deterioration in mental health. The concept of the ‘Impact Gap’ developed from the findings, illustrates how the costs of care may be reduced by delivering good-quality social care. Control, choice and maintaining independence emerged as indicators of good-quality social care, irrespective of clinical condition. Participants identified characteristics indicative of good-quality social care specific to Parkinson's disease, including understanding Parkinson's disease, appropriate administration of medication, timing of care and reassessment. ‘Parkinson's aware’ social care was seen to generate psychological, physical and social benefits that were inter-related. Conclusions The findings indicate how maximising quality in social care delivery for people with Parkinson's disease can impact on health and well-being. Long-term or short-term benefits may result in prevented events and reductions in health and social care resource. Health professionals can be instrumental in early detection of and signposting to social care. PMID:26883233

Interface quality of different corneal lamellar–cut depths for femtosecond laser–assisted lamellar anterior keratoplasty

PubMed Central

Zhang, Chenxing; Bald, Matthew; Tang, Maolong; Li, Yan; Huang, David

2015-01-01

PURPOSE To evaluate interface quality of different corneal lamellar–cut depths with the femtosecond laser and determine a feasible range of depth for femtosecond laser–assisted lamellar anterior keratoplasty. SETTING Casey Eye Institute, Portland, Oregon, USA. DESIGN Experimental study. METHODS Full lamellar cuts were made on 20 deepithelialized human cadaver corneas using the femtosecond laser. The cut depth was 17% to 21% (100 μm), 31%, 35%, 38% to 40%, and 45% to 48% of the central stromal thickness. Scanning electron microscopy images of cap and bed surfaces were subjectively graded for ridge and roughness using a scale of 1 to 5 (1 = best). The graft–host match was evaluated by photography and optical coherence tomography in a simulated procedure. RESULTS The ridge score was correlated with the cut depth (P = .0078, R = 0.58) and better correlated with the percentage cut depth (P = .00024, R = 0.73). The shallowest cuts had the least ridges (score 1.25). The 31% cut depth produced significantly less ridges (score 2.15) than deeper cuts. The roughness score ranged from 2.19 to 3.08 for various depths. A simulated procedure using a 100 μm host cut and a 177 μm (31%) graft had a smooth interface and flush anterior junction using an inverted side-cut design. CONCLUSIONS The femtosecond laser produced more ridges in deeper lamellar cuts. A depth setting of 31% stromal thickness might produce adequate surface quality for femtosecond laser–assisted lamellar anterior keratoplasty. The inverted side-cut design produced good edge apposition even when the graft was thicker than the host lamellar–cut depth. PMID:25747165

Tandem mass spectrometry data quality assessment by self-convolution.

PubMed

Choo, Keng Wah; Tham, Wai Mun

2007-09-20

Many algorithms have been developed for deciphering the tandem mass spectrometry (MS) data sets. They can be essentially clustered into two classes. The first performs searches on theoretical mass spectrum database, while the second based itself on de novo sequencing from raw mass spectrometry data. It was noted that the quality of mass spectra affects significantly the protein identification processes in both instances. This prompted the authors to explore ways to measure the quality of MS data sets before subjecting them to the protein identification algorithms, thus allowing for more meaningful searches and increased confidence level of proteins identified. The proposed method measures the qualities of MS data sets based on the symmetric property of b- and y-ion peaks present in a MS spectrum. Self-convolution on MS data and its time-reversal copy was employed. Due to the symmetric nature of b-ions and y-ions peaks, the self-convolution result of a good spectrum would produce a highest mid point intensity peak. To reduce processing time, self-convolution was achieved using Fast Fourier Transform and its inverse transform, followed by the removal of the "DC" (Direct Current) component and the normalisation of the data set. The quality score was defined as the ratio of the intensity at the mid point to the remaining peaks of the convolution result. The method was validated using both theoretical mass spectra, with various permutations, and several real MS data sets. The results were encouraging, revealing a high percentage of positive prediction rates for spectra with good quality scores. We have demonstrated in this work a method for determining the quality of tandem MS data set. By pre-determining the quality of tandem MS data before subjecting them to protein identification algorithms, spurious protein predictions due to poor tandem MS data are avoided, giving scientists greater confidence in the predicted results. We conclude that the algorithm performs well and could potentially be used as a pre-processing for all mass spectrometry based protein identification tools.

Sensory descriptors, hedonic perception and consumer’s attitudes to Sangiovese red wine deriving from organically and conventionally grown grapes

PubMed Central

Pagliarini, Ella; Laureati, Monica; Gaeta, Davide

2013-01-01

In recent years, produce obtained from organic farming methods (i.e., a system that minimizes pollution and avoids the use of synthetic fertilizers and pesticides) has rapidly increased in developed countries. This may be explained by the fact that organic food meets the standard requirements for quality and healthiness. Among organic products, wine has greatly attracted the interest of the consumers. In the present study, trained assessors and regular wine consumers were respectively required to identify the sensory properties (e.g., odor, taste, flavor, and mouthfeel sensations) and to evaluate the hedonic dimension of red wines deriving from organically and conventionally grown grapes. Results showed differences related mainly to taste (sour and bitter) and mouthfeel (astringent) sensations, with odor and flavor playing a minor role. However, these differences did not influence liking, as organic and conventional wines were hedonically comparable. Interestingly, 61% of respondents would be willing to pay more for organically produced wines, which suggests that environmentally sustainable practices related to wine quality have good market prospects. PMID:24348447

Sensory descriptors, hedonic perception and consumer's attitudes to Sangiovese red wine deriving from organically and conventionally grown grapes.

PubMed

Pagliarini, Ella; Laureati, Monica; Gaeta, Davide

2013-01-01

In recent years, produce obtained from organic farming methods (i.e., a system that minimizes pollution and avoids the use of synthetic fertilizers and pesticides) has rapidly increased in developed countries. This may be explained by the fact that organic food meets the standard requirements for quality and healthiness. Among organic products, wine has greatly attracted the interest of the consumers. In the present study, trained assessors and regular wine consumers were respectively required to identify the sensory properties (e.g., odor, taste, flavor, and mouthfeel sensations) and to evaluate the hedonic dimension of red wines deriving from organically and conventionally grown grapes. Results showed differences related mainly to taste (sour and bitter) and mouthfeel (astringent) sensations, with odor and flavor playing a minor role. However, these differences did not influence liking, as organic and conventional wines were hedonically comparable. Interestingly, 61% of respondents would be willing to pay more for organically produced wines, which suggests that environmentally sustainable practices related to wine quality have good market prospects.

Developing Countries Vaccine Manufacturers Network: doing good by making high-quality vaccines affordable for all.

PubMed

Pagliusi, Sonia; Leite, Luciana C C; Datla, Mahima; Makhoana, Morena; Gao, Yongzhong; Suhardono, Mahendra; Jadhav, Suresh; Harshavardhan, Gutla V J A; Homma, Akira

2013-04-18

The Developing Countries Vaccine Manufacturers Network (DCVMN) is a unique model of a public and private international alliance. It assembles governmental and private organizations to work toward a common goal of manufacturing and supplying high-quality vaccines at affordable prices to protect people around the world from known and emerging infectious diseases. Together, this group of manufacturers has decades of experience in manufacturing vaccines, with technologies, know-how, and capacity to produce more than 40 vaccines types. These manufacturers have already contributed more than 30 vaccines in various presentations that have been prequalified by the World Health Organization for use by global immunization programmes. Furthermore, more than 45 vaccines are in the pipeline. Recent areas of focus include vaccines to protect against rotavirus, human papillomavirus (HPV), Japanese encephalitis, meningitis, hepatitis E, poliovirus, influenza, and pertussis, as well as combined pentavalent vaccines for children. The network has a growing number of manufacturers that produce a growing number of products to supply the growing demand for vaccines in developing countries. Copyright © 2013. Published by Elsevier Ltd.

Building an evidence base for community health: a review of the quality of program evaluations.

PubMed

Jolley, Gwyn M; Lawless, Angela P; Baum, Fran E; Hurley, Catherine J; Fry, Denise

2007-11-01

An assessment of the quality of program evaluations conducted in South Australian community health services investigated how effective evaluation reporting is in producing an evidence base for community health. Evaluation reports were assessed by a team of reviewers. Practitioner workshops allowed an understanding of the uses of evaluation and what promotes or acts as a barrier to undertaking evaluations. Community health services do undertake a good deal of evaluation. However, reports were not generally explicit in dealing with the principles that underpin community health. Few engaged with program theory or rationale. Typically, reports were of short-term projects with uncertain futures so there may seem little point in considering issues of long-term health outcomes and transferability to other settings. The most important issue from our study is the lack of investment in applied health services research of the sort that will be required to produce the evidence for practice that policy makers desire. The current lack of evidence for community health reflects failure of the system to invest in research and evaluation that is adequately resourced and designed for complex community settings.

The inhibition of RANK-ligand in the management of postmenopausal osteoporosis and related fractures: the role of denosumab.

PubMed

Capozzi, Anna; Lello, Stefano; Pontecorvi, Alfredo

2014-06-01

There is great interest in new treatments of osteoporosis owing to general ageing of population and increased risk for fragility fractures in the elderly. Current therapies show a good efficacy in improving bone quality and bone density, but, in spite of a certain reduction in fracture rate, according to each treatment, the problem of osteoporotic fractures is yet far from to be solved. Moreover, some treatments may produce different side effects. Denosumab (Dmab), a receptor activator of nuclear factor kappa-B ligand (RANKL)-inhibitor, is an agent recently introduced in clinical practice for treatment of osteoporosis of postmenopausal women. Dmab has improved bone mineral density and prevented new vertebral and non-vertebral fractures with a similar efficacy in comparison with alendronate. Many clinical studies showed Dmab produces also significant improvement versus placebo in bone quality as indicated by decreasing markers of bone turnover. Patients using Dmab reported less risk of AFF (Atypical Femoral Fractures) and ONJ (Osteonecrosis of the Jaw) with an increased number of cellulitis. Here, we review articles using Dmab for female post-menopausal osteoporosis.

Inner ear tissue preservation by rapid freezing: Improving fixation by high-pressure freezing and hybrid methods

PubMed Central

Bullen, A.; Taylor, R.R.; Kachar, B.; Moores, C.; Fleck, R.A.; Forge, A.

2014-01-01

In the preservation of tissues in as ‘close to life’ state as possible, rapid freeze fixation has many benefits over conventional chemical fixation. One technique by which rapid freeze-fixation can be achieved, high pressure freezing (HPF), has been shown to enable ice crystal artefact-free freezing and tissue preservation to greater depths (more than 40 μm) than other quick-freezing methods. Despite increasingly becoming routine in electron microscopy, the use of HPF for the fixation of inner ear tissue has been limited. Assessment of the quality of preservation showed routine HPF techniques were suitable for preparation of inner ear tissues in a variety of species. Good preservation throughout the depth of sensory epithelia was achievable. Comparison to chemically fixed tissue indicated that fresh frozen preparations exhibited overall superior structural preservation of cells. However, HPF fixation caused characteristic artefacts in stereocilia that suggested poor quality freezing of the actin bundles. The hybrid technique of pre-fixation and high pressure freezing was shown to produce cellular preservation throughout the tissue, similar to that seen in HPF alone. Pre-fixation HPF produced consistent high quality preservation of stereociliary actin bundles. Optimising the preparation of samples with minimal artefact formation allows analysis of the links between ultrastructure and function in inner ear tissues. PMID:25016142

Robust moving mesh algorithms for hybrid stretched meshes: Application to moving boundaries problems

NASA Astrophysics Data System (ADS)

Landry, Jonathan; Soulaïmani, Azzeddine; Luke, Edward; Ben Haj Ali, Amine

2016-12-01

A robust Mesh-Mover Algorithm (MMA) approach is designed to adapt meshes of moving boundaries problems. A new methodology is developed from the best combination of well-known algorithms in order to preserve the quality of initial meshes. In most situations, MMAs distribute mesh deformation while preserving a good mesh quality. However, invalid meshes are generated when the motion is complex and/or involves multiple bodies. After studying a few MMA limitations, we propose the following approach: use the Inverse Distance Weighting (IDW) function to produce the displacement field, then apply the Geometric Element Transformation Method (GETMe) smoothing algorithms to improve the resulting mesh quality, and use an untangler to revert negative elements. The proposed approach has been proven efficient to adapt meshes for various realistic aerodynamic motions: a symmetric wing that has suffered large tip bending and twisting and the high-lift components of a swept wing that has moved to different flight stages. Finally, the fluid flow problem has been solved on meshes that have moved and they have produced results close to experimental ones. However, for situations where moving boundaries are too close to each other, more improvements need to be made or other approaches should be taken, such as an overset grid method.

Systems and processes that ensure high quality care.

PubMed

Bassett, Sally; Westmore, Kathryn

2012-10-01

This is the second in a series of articles examining the components of good corporate governance. It considers how the structures and processes for quality governance can affect an organisation's ability to be assured about the quality of care. Complex information systems and procedures can lead to poor quality care, but sound structures and processes alone are insufficient to ensure good governance, and behavioural factors play a significant part in making sure that staff are enabled to provide good quality care. The next article in this series looks at how the information reporting of an organisation can affect its governance.

Mind-to-paper is an effective method for scientific writing.

PubMed

Rosenberg, Jacob; Burcharth, Jakob; Pommergaard, Hans Christian; Danielsen, Anne Kjærgaard

2013-03-01

The problem of initiating the writing process is a well-known phenomenon, especially for young and inexperienced scientists. The purpose of this paper is to present an effective method to overcome this problem and increase writing efficiency among inexperienced scientists. Twelve young scientists within the medical/surgical fields were introduced to the mind-to-paper concept. The first and last article drafts produced by each of the scientists were scored for language complexity (LIX number, Flesch Reading Ease Scale and Gunning Fog), flow, structure, length and use of references; and the results were compared. All participants produced one full article draft during each of the three dictation days. When comparing the first and last article draft regarding time used, no significant difference was detected. In general, the manuscripts were of high quality on all evaluated parameters, but language complexity had increased in the final manuscript. Mind-to-paper dictation for scientific writing is an effective method for production of scientific papers of good initial quality, even when used for the first time by inexperienced scientists. We conclude that practicing this concept produces papers of an adequate language complexity, and that dictation as a writing tool allows for fast transfer of ideas and thoughts to written text. not relevant. not relevant.

Progress in the Development of the Lead Tungstate Crystals for EM-Calorimetry in High-Energy Physics

NASA Astrophysics Data System (ADS)

Novotny, R. W.; Brinkmann, K.-T.; Borisevich, A.; Dormenev, V.; Houzvicka, J.; Korjik, M.; Zaunick, H.-G.

2017-11-01

Even at present time there is a strong interest and demand for high quality lead tungstate crystals (PbWO4, PWO) for electromagnetic (EM) calorimetry. PWO is implemented into the EM calorimeter of the CMS-ECAL detector at LHC [1] and required for the completion of the PANDA EMC [2] and various ongoing detector projects at Jefferson Lab. The successful mass production of PWO using the Czochralski method was stopped after bankruptcy of the Bogoroditsk Technical Chemical Plant (BTCP) in Russia as major producer so far. The Shanghai Institute of Ceramics, Chinese Academy of Science (China) was considered as an alternative producer using the modified Bridgman method. The company CRYTUR (Turnov, Czech Republic) with good experience in the development and production of different types of inorganic oxide crystals has restarted at the end of 2014 the development of lead tungstate for mass production based on the Czochralski method. An impressive progress was achieved since then. The growing technology was optimized to produce full size samples with the quality meeting the PANDA-EMC specifications for PWO-II. We will present a detailed progress report on the research program in collaboration with groups at Orsay and JLab. The full size crystals will be characterized with respect to optical performance, light yield, kinetics and radiation hardness.

Considering whether Medicaid is worth the cost: revisiting the Oregon Health Study.

PubMed

Muennig, Peter A; Quan, Ryan; Chiuzan, Codruta; Glied, Sherry

2015-05-01

The Oregon Health Study was a groundbreaking experiment in which uninsured participants were randomized to either apply for Medicaid or stay with their current care. The study showed that Medicaid produced numerous important socioeconomic and health benefits but had no statistically significant impact on hypertension, hypercholesterolemia, or diabetes. Medicaid opponents interpreted the findings to mean that Medicaid is not a worthwhile investment. Medicaid proponents viewed the experiment as statistically underpowered and, irrespective of the laboratory values, suggestive that Medicaid is a good investment. We tested these competing claims and, using a sensitive joint test and statistical power analysis, confirmed that the Oregon Health Study did not improve laboratory values. However, we also found that Medicaid is a good value, with a cost of just $62 000 per quality-adjusted life-years gained.

[Simultaneous determination of eleven components in Ginkgo biloba leaves by high performance liquid chromatography method].

PubMed

Lv, Jin-Li; Yang, Biao; Li, Meng-Xuan; Meng, Zhao-Qing; Ma, Shi-Ping; Wang, Zhen-Zhong; Ding, Gang; Huang, Wen-Zhe; Xiao, Wei

2017-03-01

To study Ginkgo biloba leaves in different producing area, we establish an HPLC method for the simultaneously determination of seven flavonoids glycosides and four biflavonoids in G. biloba leaves. The analysis was performed on an Agilent ZORBAX SB-C₁₈ column(4.6 mm×250 mm, 5 μm) wich acetonitrile, and 0.4% phosphoric acid as mobile phase at flow rate of 1 mL•min⁻¹ in a gradient edution, and the detection was carried out at 254 nm.The calibration curves of the seven flavonoids glycosides and four biflavonoids had a good linearitiy with good recoveries. The established HPLC method is simple, rapid, accurate, reliable, and sensitive, and can be applied to the identification and quality control of G. biloba leaves. Copyright© by the Chinese Pharmaceutical Association.

Developing optic technologies in Belarus

NASA Astrophysics Data System (ADS)

Rubanov, Alexander S.; Shkadarevich, Alexei P.

2001-03-01

In this work we give a retrospective analysis of the development of optical technologies in Belarus. In the post-war period a great scientific and technological potential has been built up in this sphere, highly skilled specialist have been trained and prestigious scientific and technical schools have appeared. Belarusian multiprofile optical industry is noticed to be capable of producing not only the materials and equipment for optical production but also optical goods of the highest level of complication. The characteristics of cosmic photoequipment, photogrammetric and cinetheodolite techniques, a variety of laser devices and optical goods for civic purposes are given as an example. The instances demonstrating the realization of unique optical projects are considered as well. High quality of Belarusian optical production makes it be much in demand in Russia, Japan, USA, Germany, France, China, Korea, Sweden, Spain, England, United Arab Emirates and other countries.

Abnormalities of hybrid grouper (Epinephelus fuscoguttatus x Epinephelus lanceolatus) in Situbondo

NASA Astrophysics Data System (ADS)

Triastuti, J.; Pursetyo, K. T.; Monica, A.; Lutfiyah, L.; Budi, D. S.

2018-04-01

Grouper is one of consumption fish which is demanded excessively by local consumers and foreign consumers. Hybridization of grouper has been performed considerably that produce the good genetic quality of hybrid variants. One of grouper fish which has good genetic in its growth is kertang grouper fish. Nowadays many hatcheries performing hybridization between kertang grouper fish and tiger grouper fish, however observation of the hybrid abnormality has not been performed yet. Abnormality is able to increase since genetic causes, so that observation of abnormality occurrence in cantang hybrid grouper fish in Situbondo, JawaTimur, Indonesia in May – July in 3 times grading of juvenile stadia was performed. Results showed abnormalities were observed on mouth and operculum, branched of neural arch, fusion of neural arch, fusion of posterior truncus vertebrae, fusion of caudal vertebrae, fusion of anterior truncus vertebrae.

Transboundary health impacts of transported global air pollution and international trade

NASA Astrophysics Data System (ADS)

Tong, D.; Zhang, Q.; Jiang, X.

2017-12-01

Millions of people die every year from diseases caused by exposure to outdoor air pollution. Some studies have estimated premature mortality related to local sources of air pollution, but local air quality can also be affected by atmospheric transport of pollution from distant sources. International trade is contributing to the globalization of emission and pollution as a result of the production of goods (and their associated emissions) in one region for consumption in another region. The effects of international trade on air pollutant emissions, air quality and health have been investigated regionally, but a combined, global assessment of the health impacts related to international trade and the transport of atmospheric air pollution is lacking. Here we combine four global models to estimate premature mortality caused by fine particulate matter (PM2.5) pollution as a result of atmospheric transport and the production and consumption of goods and services in different world regions. We find that, of the 3.45 million premature deaths related to PM2.5 pollution in 2007 worldwide, about 12 per cent (411,100 deaths) were related to air pollutants emitted in a region of the world other than that in which the death occurred, and about 22 per cent (762,400 deaths) were associated with goods and services produced in one region for consumption in another. For example, PM2.5 pollution produced in China in 2007 is linked to more than 64,800 premature deaths in regions other than China, including more than 3,100 premature deaths in western Europe and the USA; on the other hand, consumption in western Europe and the USA is linked to more than 108,600 premature deaths in China. Our results reveal that the transboundary health impacts of PM2.5 pollution associated with international trade are greater than those associated with long-distance atmospheric pollutant transport.

Transboundary health impacts of transported global air pollution and international trade.

PubMed

Zhang, Qiang; Jiang, Xujia; Tong, Dan; Davis, Steven J; Zhao, Hongyan; Geng, Guannan; Feng, Tong; Zheng, Bo; Lu, Zifeng; Streets, David G; Ni, Ruijing; Brauer, Michael; van Donkelaar, Aaron; Martin, Randall V; Huo, Hong; Liu, Zhu; Pan, Da; Kan, Haidong; Yan, Yingying; Lin, Jintai; He, Kebin; Guan, Dabo

2017-03-29

Millions of people die every year from diseases caused by exposure to outdoor air pollution. Some studies have estimated premature mortality related to local sources of air pollution, but local air quality can also be affected by atmospheric transport of pollution from distant sources. International trade is contributing to the globalization of emission and pollution as a result of the production of goods (and their associated emissions) in one region for consumption in another region. The effects of international trade on air pollutant emissions, air quality and health have been investigated regionally, but a combined, global assessment of the health impacts related to international trade and the transport of atmospheric air pollution is lacking. Here we combine four global models to estimate premature mortality caused by fine particulate matter (PM 2.5 ) pollution as a result of atmospheric transport and the production and consumption of goods and services in different world regions. We find that, of the 3.45 million premature deaths related to PM 2.5 pollution in 2007 worldwide, about 12 per cent (411,100 deaths) were related to air pollutants emitted in a region of the world other than that in which the death occurred, and about 22 per cent (762,400 deaths) were associated with goods and services produced in one region for consumption in another. For example, PM 2.5 pollution produced in China in 2007 is linked to more than 64,800 premature deaths in regions other than China, including more than 3,100 premature deaths in western Europe and the USA; on the other hand, consumption in western Europe and the USA is linked to more than 108,600 premature deaths in China. Our results reveal that the transboundary health impacts of PM 2.5 pollution associated with international trade are greater than those associated with long-distance atmospheric pollutant transport.

Transboundary health impacts of transported global air pollution and international trade

NASA Astrophysics Data System (ADS)

Zhang, Qiang; Jiang, Xujia; Tong, Dan; Davis, Steven J.; Zhao, Hongyan; Geng, Guannan; Feng, Tong; Zheng, Bo; Lu, Zifeng; Streets, David G.; Ni, Ruijing; Brauer, Michael; van Donkelaar, Aaron; Martin, Randall V.; Huo, Hong; Liu, Zhu; Pan, Da; Kan, Haidong; Yan, Yingying; Lin, Jintai; He, Kebin; Guan, Dabo

2017-03-01

Millions of people die every year from diseases caused by exposure to outdoor air pollution. Some studies have estimated premature mortality related to local sources of air pollution, but local air quality can also be affected by atmospheric transport of pollution from distant sources. International trade is contributing to the globalization of emission and pollution as a result of the production of goods (and their associated emissions) in one region for consumption in another region. The effects of international trade on air pollutant emissions, air quality and health have been investigated regionally, but a combined, global assessment of the health impacts related to international trade and the transport of atmospheric air pollution is lacking. Here we combine four global models to estimate premature mortality caused by fine particulate matter (PM2.5) pollution as a result of atmospheric transport and the production and consumption of goods and services in different world regions. We find that, of the 3.45 million premature deaths related to PM2.5 pollution in 2007 worldwide, about 12 per cent (411,100 deaths) were related to air pollutants emitted in a region of the world other than that in which the death occurred, and about 22 per cent (762,400 deaths) were associated with goods and services produced in one region for consumption in another. For example, PM2.5 pollution produced in China in 2007 is linked to more than 64,800 premature deaths in regions other than China, including more than 3,100 premature deaths in western Europe and the USA; on the other hand, consumption in western Europe and the USA is linked to more than 108,600 premature deaths in China. Our results reveal that the transboundary health impacts of PM2.5 pollution associated with international trade are greater than those associated with long-distance atmospheric pollutant transport.

Dispersive Raman spectroscopy for the nondestructive and rapid assessment of honey quality

NASA Astrophysics Data System (ADS)

Mignani, A. G.; Ciaccheri, L.; Mencaglia, A. A.; Di Sanzo, R.; Carabetta, S.; Russo, M. T.

2015-09-01

Raman spectroscopy performed using optical fibers, with excitation at 1064 nm and a dispersive detection scheme, was utilized to measure a selection of unifloral honeys produced in the Italian region of Calabria. The honey samples had three different botanical origins: chestnut, citrus, and acacia, respectively. A multivariate processing of the spectroscopic data enabled us to distinguish their botanical origin, and to build predictive models for quantifying important nutraceutic indicators such as the main sugars and potassium. Furthermore, the Raman spectra of chestnut honeys were compared with the taste profile measured by an electronic tongue, and a good correlation to bitter/savory taste was obtained. This experiment indicates the excellent potentials of Raman spectroscopy as an analytical tool for the nondestructive and rapid assessment of food-quality indicators.

GMP in blood collection and processing.

PubMed

Wagstaff, W

1998-01-01

The principles of Good Manufacturing Practice have, in the main, been universally developed for the guidance of the pharmaceutical industry rather than for transfusion services. However, these rules and guides are increasingly being adapted for use in blood centres, in the production of labile blood components and of plasma for fractionation. The guide for pharmaceutical industries produced by the commission of the European Communities is used as a model here, the nine basic requirements being those applicable to Quality Management, personnel, premises and equipment, document, production, Quality Control, contract manufacture and analysis, complaints and product recall, and self-inspection. Though having more direct application to the production laboratory preparing blood components, the majority of these requirements and principles are also directly applicable to all of the activities involved in blood collection.

A low-cost procedure for production of fresh autochthonous wine yeast.

PubMed

Maqueda, Matilde; Pérez-Nevado, Francisco; Regodón, José A; Zamora, Emiliano; Alvarez, María L; Rebollo, José E; Ramírez, Manuel

2011-03-01

A low-cost procedure was designed for easy and rapid response-on-demand production of fresh wine yeast for local wine-making. The pilot plant produced fresh yeast culture concentrate with good microbial quality and excellent oenological properties from four selected wine yeasts. The best production yields were obtained using 2% sugar beet molasses and a working culture volume of less than 60% of the fermenter capacity. The yeast yield using 2% sugar grape juice was low and had poor cell viability after freeze storage, although the resulting yeast would be directly available for use in the winery. The performance of these yeasts in commercial wineries was excellent; they dominated must fermentation and improved its kinetics, as well as improving the physicochemical parameters and the organoleptic quality of red and white wines.

Characteristic of x-ray tomography performance using CdTe timepix detector

NASA Astrophysics Data System (ADS)

Zain, R. M.; O'Shea, V.; Maneuski, D.

2017-01-01

X-ray Computed Tomography (CT) is a non-destructive technique for visualizing interior features within solid objects, and for obtaining digital information on their 3-D geometries and properties. The selection of CdTe Timepix detector has a sufficient performance of imaging detector is based on quality of detector performance and energy resolution. The study of Modulation Transfer Function (MTF) shows a 70% contrast at 4 lp/mm was achieved for the 55 µm pixel pitch detector with the 60 kVp X-ray tube and 5 keV noise level. No significant degradation in performance was observed for X-ray tube energies of 20 - 60 keV. The paper discusses the application of the CdTe Timepix detector to produce a good quality image of X-ray tomography imaging.

In pursuit of goodness in bioethics: analysis of an exemplary article.

PubMed

Hofmann, Bjørn; Magelssen, Morten

2018-06-15

What is good bioethics? Addressing this question is key for reinforcing and developing the field. In particular, a discussion of potential quality criteria can heighten awareness and contribute to the quality of bioethics publications. Accordingly, the objective of this article is threefold: first, we want to identify a set of criteria for quality in bioethics. Second, we want to illustrate the added value of a novel method: in-depth analysis of a single article with the aim of deriving quality criteria. The third and ultimate goal is to stimulate a broad and vivid debate on goodness in bioethics. An initial literature search reveals a range of diverse quality criteria. In order to expand on the realm of such quality criteria, we perform an in-depth analysis of an article that is acclaimed for being exemplary. The analysis results in eleven specific quality criteria for good bioethics in three categories: argumentative, empirical, and dialectic. Although we do not claim that the identified criteria are universal or absolute, we argue that they are fruitful for fueling a continuous constitutive debate on what is "good bioethics." Identifying, debating, refining, and applying such criteria is an important part of defining and improving bioethics.

Parametric Optimization Of Gas Metal Arc Welding Process By Using Grey Based Taguchi Method On Aisi 409 Ferritic Stainless Steel

NASA Astrophysics Data System (ADS)

Ghosh, Nabendu; Kumar, Pradip; Nandi, Goutam

2016-10-01

Welding input process parameters play a very significant role in determining the quality of the welded joint. Only by properly controlling every element of the process can product quality be controlled. For better quality of MIG welding of Ferritic stainless steel AISI 409, precise control of process parameters, parametric optimization of the process parameters, prediction and control of the desired responses (quality indices) etc., continued and elaborate experiments, analysis and modeling are needed. A data of knowledge - base may thus be generated which may be utilized by the practicing engineers and technicians to produce good quality weld more precisely, reliably and predictively. In the present work, X-ray radiographic test has been conducted in order to detect surface and sub-surface defects of weld specimens made of Ferritic stainless steel. The quality of the weld has been evaluated in terms of yield strength, ultimate tensile strength and percentage of elongation of the welded specimens. The observed data have been interpreted, discussed and analyzed by considering ultimate tensile strength ,yield strength and percentage elongation combined with use of Grey-Taguchi methodology.

Estimating potential Engelmann spruce seed production on the Fraser Experimental Forest, Colorado

Treesearch

Robert R. Alexander; Carleton B. Edminster; Ross K. Watkins

1986-01-01

Two good, three heavy, and two bumper spruce seed crops were produced during a 15-year period. There was considerable variability in seed crops, however. Not all locations produced good to bumper seed crops when overall yearly ratings averaged good or better; conversely, some locations produced bumper seed crops in 3 or more years. Mathematical relationships,...

31 CFR 539.306 - Goods, technology, or services produced or provided by a designated foreign person.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Goods, technology, or services..., technology, or services produced or provided by a designated foreign person. With respect to the prohibitions in §§ 539.201 and 539.202, the term goods, technology, or services produced or provided by a...

Quality of the delivery services in health facilities in Northern Ethiopia.

PubMed

Fisseha, Girmatsion; Berhane, Yemane; Worku, Alemayehu; Terefe, Wondwossen

2017-03-09

Substantial improvements have been observed in the coverage of and access to maternal health service, especially in skilled birth attendants, in Ethiopia. However, the quality of care has been lagging behind. Therefore, this study investigated the status of the quality of delivery services in Northern Ethiopia. A facility based survey was conducted from December 2014 to February 2015 in Northern Ethiopia. The quality of delivery service was assessed in 32 health facilities using a facility audit checklist, by reviewing delivery, by conducting in-depth interview and observation, and by conducting exit interviews with eligible mothers. Facilities were considered as 'good quality' if they scored positively on 75% of the quality indicators set in the national guidelines for all the three components; input (materials, infrastructure, and human resource), process (adherence to standard care procedures during intrapartum and immediate postpartum periods) and output (the mothers' satisfaction and utilization of lifesaving procedures). Overall 2 of 32 (6.3%) of the study facilities fulfilled all the three quality components; input, process and output. Two of the three components were assessed as good in 11 of the 32 (34.4%) health facilities. The input quality was the better of the other quality components; which was good in 21 out of the 32 (65.6%) health facilities. The process and output quality was good in only 10 of the 32 (31.3%) facilities. Only 6.3% of the studied health facilities had good quality in all three dimensions of quality measures that was done in accordance to the national delivery service guidelines. The most compromised quality component was the process. Systematic and sustained efforts need to be strengthened to improve all dimensions of quality in order to achieve the desired quality of delivery services and increase the proportion of births occurring in health facilities.

Efficient Dual Head Nd:YAG 100mJ Oscillator for Remote Sensing

NASA Technical Reports Server (NTRS)

Coyle, Donald B.; Stysley, Paul R.; Kay, Richard b.; Poulios, Demetrios

2007-01-01

A diode pumped, Nd:YAG laser producing 100 mJ Q-switched pulses and employing a dual-pump head scheme in an unstable resonator configuration is described. Each head contains a side pumped zig-zag slab and four 6-bar QCW 808 nm diodes arrays which are de-rated 23%. Denoting 'z' as the lasing axis, the pump directions were along the x-axis in one head and the y-axis in the other, producing a circularized thermal lens, more typical in laser rod-based cavities. The dual head design's effective thermal lens is now corrected with a proper HR mirror curvature selection. This laser has demonstrated over 100 mJ output with high optical efficiency (24%), good TEM(sub 00) beam quality, and high pointing stability.

Metal-Free CVD Graphene Synthesis on 200 mm Ge/Si(001) Substrates.

PubMed

Lukosius, M; Dabrowski, J; Kitzmann, J; Fursenko, O; Akhtar, F; Lisker, M; Lippert, G; Schulze, S; Yamamoto, Y; Schubert, M A; Krause, H M; Wolff, A; Mai, A; Schroeder, T; Lupina, G

2016-12-14

Good quality, complementary-metal-oxide-semiconductor (CMOS) technology compatible, 200 mm graphene was obtained on Ge(001)/Si(001) wafers in this work. Chemical vapor depositions were carried out at the deposition temperatures of 885 °C using CH 4 as carbon source on epitaxial Ge(100) layers, which were grown on Si(100), prior to the graphene synthesis. Graphene layer with the 2D/G ratio ∼3 and low D mode (i.e., low concentration of defects) was measured over the entire 200 mm wafer by Raman spectroscopy. A typical full-width-at-half-maximum value of 39 cm -1 was extracted for the 2D mode, further indicating that graphene of good structural quality was produced. The study also revealed that the lack of interfacial oxide correlates with superior properties of graphene. In order to evaluate electrical properties of graphene, its 2 × 2 cm 2 pieces were transferred onto SiO 2 /Si substrates from Ge/Si wafers. The extracted sheet resistance and mobility values of transferred graphene layers were ∼1500 ± 100 Ω/sq and μ ≈ 400 ± 20 cm 2 /V s, respectively. The transferred graphene was free of metallic contaminations or mechanical damage. On the basis of results of DFT calculations, we attribute the high structural quality of graphene grown by CVD on Ge to hydrogen-induced reduction of nucleation probability, explain the appearance of graphene-induced facets on Ge(001) as a kinetic effect caused by surface step pinning at linear graphene nuclei, and clarify the orientation of graphene domains on Ge(001) as resulting from good lattice matching between Ge(001) and graphene nucleated on such nuclei.

Terroir et vignoble: how the farming management can affect the production of a quality wine

NASA Astrophysics Data System (ADS)

Gallo, Alba; Bini, Claudio

2016-04-01

Italian wine is one of the most exported wine in the world. The particular climate, the soil characteristics and other several factors have contributed to this success. Italy is located in the temperate belt, with a suitable climate for grapevine cultivation. For this reason, all regions in Italy produce wine, first of all the Veneto region, with 8.569.000 hl of wine in 2011. Wine quality derives from the perfect interaction among climate, morphology, soil and plant, i.e. the terroir. So, knowledge of the land characteristics, together with cultivation techniques and management, is essential to understand this interaction and the typicality of the wine. For example, large utilization of fertilizers and pesticides may determine accumulation of toxic substances in soil and possible translocation to the food chain. For this reason, metal contamination of soils and plants becomes a main issue in agricultural production. Therefore, our attention was focused on the determination of soil quality of the Prosecco DOCG (controlled and guaranteed denomination of origin) area, particularly in Conegliano. Conegliano is a town located in Veneto, in the province of Treviso, known for its wine. This wine variety is regulated by the Conegliano-Valdobbiadene production Consortium, to protect both consumers and producers. The goals of this research are: evaluation of trace metal content (Al ,Cd, Cr, Cu, Fe, Mg, Mn, Ni, P, Pb, V and Zn) in soils and possible uptake by grape leaves; estimation of biological soil quality (QBS-ar index); analysis of oxidative stress in dandelion (Taraxacum officinale) and grape leaves, by the Lipid peroxidation test (LPO test). Results concerning trace metal concentration show: i) a high content of Al, Mg and P in soils, and ii) high concentration of Al, Cu, Fe and Zn in grape leaves. High contents of Al in topsoil are consistent with the high concentration of organic matter. Instead, high Al contents in subsoil are related to clay. Mg and P are usually added to soil as fertilizer. In grape leaves, Al concentration is releated to Al content in soil, Cu could derive from foliar fungicides and no signs of toxicity from high content of Fe and Zn are visible. LPO test values are below the reference value, therefore vegetation in the study area is not affected by oxidative stress. Concerning the biological soil quality, 3 different classes (4, 5 and 6) were recorded (with noteworthy microarthropods adaption to soil conditions. This result suggest that the study area presents good grade ecosystem stability and limited stress evident. In conclusion, it is possible to assert that the study area is characterized by not polluted soils of good quality and without environmental stress. It is likely that the agronomic practices do not produce any negative effect on plant growth and, thus, on quality of wine.

Exploring the concept of quality care for the person who is dying.

PubMed

Stefanou, Nichola; Faircloth, Sandra

2010-12-01

The concept of good quality care for the patient who is dying is diverse and complex. Many of the actions that are being taken to increase the quality of care of the dying patient are based around outcome, uniformity of service and standardization of process. There are two main areas that are referred to when dealing with care of the dying patient; end-of-life care and palliative care. High quality end-of-life care is increasingly recognized as an ethical obligation of health-care providers, clinicians and organizations, and yet there appears little evidence from the patients' perspective. There are many national and local initiatives taking place to improve the quality of care people receive towards the end of their life. This being said initiatives alone will not achieve good quality care and deliver good patient experiences. Only clinicians working at the front line can truly influence the way in which quality is improved and good experiences delivered.

Urban Farmers' Markets: accessibility, offerings, and produce variety, quality, and price compared to nearby stores

PubMed Central

Maroko, Andrew; Sanon, Omar; Frias, Rafael; Schechter, Clyde B.

2015-01-01

Most food-environment research has focused narrowly on select stores and restaurants. There has been comparatively less attention to non-storefront food sources like farmers' markets (FMs), particularly in urban communities. The objective of the present study was to assess FMs' potential contribution to an urban food environment in terms of specific foods offered, and compare FM accessibility as well as produce variety, quality, and price to that of nearby stores. Investigators conducted a detailed cross-sectional assessment of all FMs in Bronx County, NY, and of the nearest store(s) selling produce within a half-mile walking distance (up to two stores per FM). The study included 26 FMs and 44 stores. Investigators assessed accessibility (locations of FMs and stores relative to each other, and hours of operation for each), variety (the number and type of all food items offered at FMs and all fresh produce items offered at stores), quality (where produce items were grown and if they were organic), and price (including any sales prices or promotional discounts). Analyses included frequencies, proportions, and variable distributions, as well as mixed-effect regressions, paired t-tests, and signed rank tests to compare FMs to stores. Geographic information systems (GIS) allowed for mapping of FM and store locations and determining street-network distances between them. The mean distance between FMs and the nearest store selling fresh produce was 0.15 miles (range 0.02-0.36 miles). FMs were open substantially fewer months, days, and hours than stores. FMs offered 26.4 fewer fresh produce items on average than stores (p values <0.02). FM produce items were more frequently local and organic, but often tended towards less-common/more-exotic and heirloom varieties. FMs were more expensive on average (p values <0.001 for pairwise comparisons to stores)—even for more-commonplace and “conventional” produce—especially when discounts or sales prices were considered. Fully, 32.8% of what FMs offered was not fresh produce at all but refined or processed products (e.g., jams, pies, cakes, cookies, donuts, juice drinks). FMs may offer many items not optimal for good nutrition and health, and carry less-varied, less-common fresh produce in neighborhoods that already have access to stores with cheaper prices and overwhelmingly more hours of operation. PMID:25733377

Toxic reagents and expensive equipment: are they really necessary for the extraction of good quality fungal DNA?

PubMed

Rodrigues, P; Venâncio, A; Lima, N

2018-01-01

The aim of this work was to evaluate a fungal DNA extraction procedure with the lowest inputs in terms of time as well as of expensive and toxic chemicals, but able to consistently produce genomic DNA of good quality for PCR purposes. Two types of fungal biological material were tested - mycelium and conidia - combined with two protocols for DNA extraction using Sodium Dodecyl Sulphate (SDS) and Cetyl Trimethyl Ammonium Bromide as extraction buffers and glass beads for mechanical disruption of cell walls. Our results showed that conidia and SDS buffer was the combination that lead to the best DNA quality and yield, with the lowest variation between samples. This study clearly demonstrates that it is possible to obtain high yield and pure DNA from pigmented conidia without the use of strong cell disrupting procedures and of toxic reagents. There are numerous methods for DNA extraction from fungi. Some rely on expensive commercial kits and/or equipments, unavailable for many laboratories, or make use of toxic chemicals such as chloroform, phenol and mercaptoethanol. This study clearly demonstrates that it is possible to obtain high yields of pure DNA from pigmented conidia without the use of strong and expensive cell disrupting procedures and of toxic reagents. The method herein described is simultaneously inexpensive and adequate to DNA extraction from several different types of fungi. © 2017 The Society for Applied Microbiology.

Quality of Life Among HIV-Infected Patients in Brazil after Initiation of Treatment

PubMed Central

Campos, Lorenza Nogueira; César, Cibele Comini; Guimarães, Mark Drew Crosland

2009-01-01

INTRODUCTION Despite improvement in clinical treatment for HIV-infected patients, the impact of antiretroviral therapy on the overall quality of life has become a major concern. OBJECTIVE To identify factors associated with increased levels of self-reported quality of life among HIV-infected patients after four months of antiretroviral therapy. METHODS Patients were recruited at two public health referral centers for AIDS, Belo Horizonte, Brazil, for a prospective adherence study. Patients were interviewed before initiating treatment (baseline) and after one and four months. Quality of life was assessed using a psychometric instrument, and factors associated with good/very good quality of life four months after the initiation of antiretroviral therapy were assessed using a cross-sectional approach. Logistic regression was used for analysis. RESULTS Overall quality of life was classified as ‘very good/good’ by 66.4% of the participants four months after initiating treatment, while 33.6% classified it as ‘neither poor nor good/poor/very poor’. Logistic regression indicated that >8 years of education, none/mild symptoms of anxiety and depression, no antiretroviral switch, lower number of adverse reactions and better quality of life at baseline were independently associated with good/very good quality of life over four months of treatment. CONCLUSIONS Our results highlight the importance of modifiable factors such as psychiatric symptoms and treatment-related variables that may contribute to a better quality of life among patients initiating treatment. Considering that poor quality of life is related to non-adherence to antiretroviral therapy, careful clinical monitoring of these factors may contribute to ensuring the long-term effectiveness of antiretroviral regimens. PMID:19759880

Synthesis of Germanium-Tin Alloys by Ion Implantation and Pulsed Laser Melting: Towards a Group IV Direct Band Gap Semiconductor

NASA Astrophysics Data System (ADS)

Tran, Tuan Thien

The germanium-tin (Ge1-xSnx) material system is expected to be a direct bandgap group IV semiconductor at a Sn content of 6.5-11 at.%. Hence there has been much interest in preparing such alloys since they are compatible with silicon and they raise the possibility of integrating photonics functionality into silicon circuitry. However, the maximum solid solubility of Sn in Ge is around 0.5 at.% and non-equilibrium deposition techniques such as molecular beam epitaxy or chemical vapour deposition have been used to achieve the desired high Sn concentrations. In this PhD work, the combination of ion implantation and pulsed laser melting (PLM) is demonstrated to be an alternative promising method to produce a highly Sn concentrated alloy with good crystal quality. In initial studies, it was shown that 100 keV Sn implants followed by PLM produced high quality alloys with up to 6.2 at.%Sn but above these Sn concentrations the crystal quality was poor. The structural properties of the ≤6.2 at.% alloys such as soluble Sn concentration, strain distribution and crystal quality have been characterised by Rutherford backscattering spectrometry (RBS), Raman spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM). The optical properties and electronic band structure have been studied by spectroscopic ellipsometry. The introduction of substitutional Sn into Ge is shown to either induce a splitting between light and heavy hole subbands or lower the conduction band at the Gamma valley. However, at higher implant doses needed to achieve >6.2 at.% Sn, ion-beam-induced porosity in Ge starts to occur, which drastically reduces the retained amount of the implanted Sn and such microstructure also hinders good crystallisation of the material during PLM. To solve this problem, it was shown that a nanometer thick SiO2 layer deposited on the Ge substrate prior to the implantation can largely eliminate the formation of porosity. This capping SiO2 layer also helps to increase the retained Sn concentration up to 15 at.% after implantation, as well as significantly improving the crystal quality of the Ge-Sn layer after PLM. With the use of the capping layer, a good quality Ge-Sn layer with 9 at.% Sn has been achieved using Sn implants at an energy of 120 keV. However, the thin film alloys produced by 100 keV or 120 keV Sn implantation and PLM are shown to contain compressive strain as a result of the large lattice mismatch between Ge and high Sn content alloys. Such strain compromises the tendency towards a direct bandgap material and hence strain relaxation is highly desirable. A thermal stability study showed that the thin film strained material is metastable up to 400°C, but thereafter Sn comes out of solution and diffuses to the material surface. To investigate a possible pathway to the synthesis of strain-relaxed material, a higher Sn implant energy of 350 keV was used to produce thicker alloy layers. XRD/reciprocal space mapping showed that this thicker alloy material is largely relaxed after PLM, which is beneficial for the direct band gap transition and solves the trade-off between higher Sn concentration and compressive strain. However, RBS indicates a sub-surface band of disorder which suggested a possible mechanism for the strain relaxation. Indeed, TEM examination of such material showed the material relaxed via the generation of non-equilibrium threading defects. Despite such defects, a PL study of this relaxed material found photon emission at a wavelength of 2150 nm for 6-9 at.% Sn alloys. However, the intensity of the emission was variable across different Sn content alloys, presumably as a result of the threading defects. A possible pathway to removing such defects is given that may enable both photodetectors and lasers to be fabricated at wavelengths above 2mum.

[Evaluating training programs on occupational health and safety: questionnaire development].

PubMed

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Value, obligation and the asymmetry question.

PubMed

Tooley, Michael

1998-04-01

Is there a prima facie obligation to produce additional individuals whose lives would be worth living? In his paper 'Is it good to make happy people?', Stuart Rachels argues not only that there is, but, also, that precisely as much weight should be assigned to the quality of life that would be enjoyed by such potential persons, if they were to be actualized, as to the quality of life enjoyed by actually existing persons. In response, I shall argue, first, that Rachels' view is exposed to very serious objections, and secondly, that his arguments in support of his position involve a crucial assumption, which cannot be sustained, concerning the relation between, on the one hand, propositions about good-making and bad-making properties, and, on the other, propositions about right-making and wrong-making ones. I shall then argue that there is a very plausible position concerning the conditions under which an action can be morally wrong which entails the following asymmetry: there is a prima facie obligation not to bring into existence individuals whose lives are not worth living, but there is no corresponding obligation to create additional individuals whose lives would be worth living.

Nd:YAG laser welding of coated sheet steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, M.P.; Kerr, H.W.; Weckman, D.C.

1994-12-31

Coated sheet steels are used extensively in the automotive industry for the fabrication of automobile body components; however, their reduced weldability by the traditional welding processes has led to numerous studies into the use of alternate process such as laser welding. In this paper, we present a modified joint geometry which allows high quality lap welds of coated sheet steels to be made by laser welding processes. Hot-dipped galvanized sheet (16 gauge), with a 60 g/m zinc coating was used in this study. A groove was created in the top sheet of a specimen pair by pressing piano wires ofmore » various diameters into the sheet. The specimens were clamped together in a lag-joint configuration such that they were in contacted only along the grove projection. A parametric study was conducted using the variables of welding speed, laser mean power (685 W, 1000 W and 1350 W), and grove size. Weld quality and weld pool dimensions were assessed using metallurgical cross-sections and image analysis techniques. Acceptable quality seam welds were produced in the galvanized sheet steel with both grove sizes when using 1000 W and 1350 W laser mean powers and a range of welding speeds. Results of the shear-tensile tests showed that high loads to failure, with failure occurring in the parent material, were predominately found in welds produced at speeds over 1.2 m/min and when using the high mean laser powers: 1000 W and 1350 W. A modified lap joint geometry, in which a groove is pre-placed in the top sheet of the lap-joint configuration, has been developed which permits laser welding of coated sheet steels. Good quality seam welds have been produced in 16 gauge galvanized sheet steels at speeds up to 2.7 m/min using a 2 kW CW Nd:YAG laser operating at 1350 W laser mean power. Weld quality was not affected by changes in groove size.« less

Exploring the Potential for Sustainable Future Bioenergy Production in the Arkansas-White-Red River Basin

NASA Astrophysics Data System (ADS)

Baskaran, L.; Jager, H.; Kreig, J.

2016-12-01

Bioenergy production in the US has been projected to increase in the next few years and this has raised concerns over environmentally sustainable production. Specifically, there are concerns that managing lands to produce bioenergy feedstocks in the Mississippi-Atchafalaya River Basin (MARB) may have impacts over the water quality in the streams draining these lands and hamper with efforts to reduce the size of the Gulf of Mexico's "Dead Zone" (hypoxic waters). However, with appropriate choice of feedstocks and good conservation practices, bioenergy production systems can be environmentally and economically sustainable. We evaluated opportunities for producing 2nd generation cellulosic feedstocks that are economically sustainable and improve water quality in the Arkansas-White-Red (AWR) river basin, which is major part of the MARB. We generated a future bioenergy landscape by downscaling county-scale projections of bioenergy crop production produced by an economic model, POLYSYS, at a market price of $60 per dry ton and a 1% annual yield increase. Our future bioenergy landscape includes perennial grasses (switchgrass and miscanthus), short-rotated woody crops (poplar and willow) and annual crops (high yield sorghum, sorghum stubble, corn stover and wheat straw). Using the Soil and Water Assessment Tool (SWAT) we analyzed changes in water quality and quantity by simulating a baseline scenario with the current landscape (2014 land cover) and a future scenario with the bioenergy landscape. Our results over the AWR indicate decreases in median nutrient and sediment loadings from the baseline scenario. We also explored methods to evaluate if conservation practices (such as reducing fertilizer applications, incorporating filter strips, planting cover crops and moving to a no-till system) can improve water quality, while maintaining biomass yield. We created a series of SWAT simulations with varying levels of conservation practices by crop and present our methods towards identifying future scenarios that may minimize water quality and maximize biomass yields.

Variability of nutritional and cooking quality in bean (Phaseolus vulgaris L) as a function of genotype.

PubMed

Saha, Supradip; Singh, Gyanendra; Mahajan, V; Gupta, H S

2009-06-01

Screening of natural biodiversity for the better quality traits are of prime importance for quality breeding programs. The objective of this investigation was to select candidate accession of bean having high concentrations of protein as well as macro and micro minerals with good cooking quality for use as parents in breeding programme for these compounds. Thirty-five accessions of bean (Phaseolus vulgaris L) were field grown and their seeds were analyzed for their cooking quality and nutritional composition. Wide variations were observed in most of the measurements e.g. protein (18.7-26.2%), iron (79.4-137.6 ppm) and hardness after cooking (4.65-9.88 Kg) suggesting that there are considerable levels of genetic diversity. Across all accessions the concentration of potassium was negatively correlated with protein (r = -0.43, P < 0.05). Concentrations of protein was significantly greater in accessions VIII, XIII and XIX compared to other accessions analyzed. Iron concentrations were greatest (137 ppm) in XIX and lowest (79 ppm) in XXVII. Lines with less cooking time were line III, X, XXVI, XXX and XXXI. Bean line XIX contains high protein (24.9%) with high zinc (33.3 ppm) and highest iron (137.6 ppm), but it has high hardness after cooking (7.32 kg). Four clusters were computed by cluster analysis that explained quite a good variation in the traits. The great variability for these attributes suggests that these selected accessions may be useful as parents in hybridization programs to produce bean with value-added traits. This information was also potentially useful for pulse breeders working on the development of new varieties.

Automated daily quality control analysis for mammography in a multi-unit imaging center.

PubMed

Sundell, Veli-Matti; Mäkelä, Teemu; Meaney, Alexander; Kaasalainen, Touko; Savolainen, Sauli

2018-01-01

Background The high requirements for mammography image quality necessitate a systematic quality assurance process. Digital imaging allows automation of the image quality analysis, which can potentially improve repeatability and objectivity compared to a visual evaluation made by the users. Purpose To develop an automatic image quality analysis software for daily mammography quality control in a multi-unit imaging center. Material and Methods An automated image quality analysis software using the discrete wavelet transform and multiresolution analysis was developed for the American College of Radiology accreditation phantom. The software was validated by analyzing 60 randomly selected phantom images from six mammography systems and 20 phantom images with different dose levels from one mammography system. The results were compared to a visual analysis made by four reviewers. Additionally, long-term image quality trends of a full-field digital mammography system and a computed radiography mammography system were investigated. Results The automated software produced feature detection levels comparable to visual analysis. The agreement was good in the case of fibers, while the software detected somewhat more microcalcifications and characteristic masses. Long-term follow-up via a quality assurance web portal demonstrated the feasibility of using the software for monitoring the performance of mammography systems in a multi-unit imaging center. Conclusion Automated image quality analysis enables monitoring the performance of digital mammography systems in an efficient, centralized manner.

High-Temperature Shape Memory Alloys

NASA Astrophysics Data System (ADS)

Biffi, C. A.; Tuissi, A.

2014-10-01

In this paper, an experimental study of laser micro-processing on a Cu-Zr-based shape memory alloy (SMA), which is suitable for high-temperature (HT) applications, is discussed. A first evaluation of the interaction between a laser beam and Zr50Cu28Ni7Co15 HT SMA is highlighted. Single laser pulses at various levels of power and pulse duration were applied to evaluate their effect on the sample surfaces. Blind and through microholes were produced with sizes on the order of a few hundreds of microns; the results were characterized from the morphological viewpoint using a scanning electron microscope. The high beam quality allows the holes to be created with good circularity and little melted material around the hole periphery. An analysis of the chemical composition was performed using energy dispersive spectroscopy, revealing that compositional changes were limited, while important oxidation occurred on the hole surfaces. Additionally, laser micro-cutting tests were also proposed to evaluate the cut edge morphology and dimensions. The main result of this paper concerned the good behavior of the material upon interaction with the laser beam, which suggests that microfeatures can be successfully produced in this alloy.

A Korean survey on qualities and definition of a good psychiatrist.

PubMed

Kim, Ji Hyun; Tor, Phern-Chern; King, Joel; Seo, Jeong Seok

2015-05-01

The definition of a "good" psychiatrist has varied over the past decades due to changing roles of psychiatrists. Studies on the qualities of "good" psychiatrists have been completed in many countries. However, no such study has been undertaken in Korea. In Korea, recent growing interest in psychiatry demands the identification of qualities for a good psychiatrist. The purpose of this study was to define the qualities of a good psychiatrist in Korea, subsequently facilitating the improvement of psychiatric training programs. The questionnaire was based on a Singaporean survey with the permission from the original authors. Respondents were divided into patient group and psychiatrist group. The 40-item questionnaire contained items grouped into four themes: Professional, Personal Values, Academic Executive and Relationship. Of the four themes, both patient and psychiatrist groups considered Professional as the most important, whereas Academic Executive as the least important. The mean scores for all items of each theme in the patient group were higher than those in the psychiatrist group, reflecting higher expectations for good psychiatrist in the patient group. Patients emphasized Relationship more than psychiatrists did. It is concluded that a good psychiatrist in Korea can be defined as "a good communicator and listener with a professional manner, who respects confidentiality and has good doctor-patient relationships."

Prevalence and impacts of poor sleep on quality of life and associated factors of good sleepers in a sample of older Chinese adults.

PubMed

Lo, Catherine M H; Lee, Paul H

2012-06-18

Sleep disturbance is a complex health problem in ageing global populations decreasing quality of life among many older people. Geographic, cultural, and ethnic differences in sleep patterns have been documented within and between Western and Asian populations. The aim of this study was to explore sleep problems among Hong Kong seniors by examining the prevalence of poor sleep quality, the relationship between sleep quality and health-related quality of life, and associated factors of good sleepers in different age groups. This cross-sectional study used convenience sampling and gathered data during face-to-face interviews. Older community-dwelling individuals (n = 301) were recruited in community centres in 2010. The Pittsburgh Sleep Quality Index and Medical Outcomes Study Short Form-36 were used to measure sleep quality and health-related quality of life. The Medical Outcomes Study Short Form-36 domain scores were compared between good and bad sleepers and between long and short sleepers using Hotelling's T-Square test. SF-36 domain scores were placed into a logistic regression model that controlled for significant demographic variables (gender, educational level, perceived health). Most (77.7%) participants were poor sleepers. Participants who had global Pittsburgh Sleep Quality Index scores <5 and slept ≥5.5 h/night had better health-related quality of life. Vitality, emotional role, physical functioning, and bodily pain domain scores were associated factors of good sleepers in different age groups. This study found a strong negative association between sleep deprivation (poor quality, short duration) and health-related quality of life. Associated factors for good sleep quality in later life differ among age groups in relation to universal age-related changes, and should be addressed by social policies and health-care programmes.

Diagenesis and reservoir quality of Bhuban sandstones (Neogene), Titas Gas Field, Bengal Basin, Bangladesh

NASA Astrophysics Data System (ADS)

Aminul Islam, M.

2009-06-01

This study deals with the diagenesis and reservoir quality of sandstones of the Bhuban Formation located at the Titas Gas Field of Bengal Basin. Petrographic study including XRD, CL, SEM and BSE image analysis and quantitative determination of reservoir properties were carried out for this study. The sandstones are fine to medium-grained, moderately well to well sorted subfeldspathic arenites with subordinate feldspathic and lithic arenites. The diagenetic processes include clay infiltration, compaction and cementation (quartz overgrowth, chlorite, kaolinite, calcite and minor amount of pyrite, dolomite and K-feldspar overgrowth). Quartz is the dominant pore occluding cement and generally occurred as small euhedral crystals, locally as large pyramidal crystals in the primary pores. Pressure solution derived from grain contact is the main contributor of quartz overgrowths. Chlorite occurs as pore-lining and pore filling cement. In some cases, chlorite helps to retain porosity by preventing quartz overgrowth. In some restricted depth interval, pore-occlusion by calcite cement is very much intense. Kaolinite locally developed as vermiform and accelerated the minor porosity loss due to pore-occlusion. Kaolinite/chlorite enhances ineffective microporosity. Kaolinite is a by-product of feldspar leaching in the presence of acidic fluid produced during the maturation of organic matter in the adjacent Miocene or deeper Oligocene source rocks. The relation between diagenesis and reservoir quality is as follows: the initial porosity was decreased by compaction and cementation and then increased by leaching of the metastable grains and dissolution of cement. Good quality reservoir rocks were deposited in fluvial environment and hence quality of reservoir rocks is also environment selective. Porosity and permeability data exhibit good inverse correlation with cement. However, some data points indicate multiple controls on permeability. Reservoir quality is thus controlled by pore occluding cement, textural parameters (grain size, pore size and sorting) and depositional environment. The reservoir finally resumed partly its pre-cementation quality after development of secondary porosity.

Interactions between environmental variables determine immunity in the Indian meal moth Plodia interpunctella.

PubMed

Triggs, Alison; Knell, Robert J

2012-03-01

1. Animals raised in good environmental conditions are expected to have more resources to invest in immunity than those raised in poor conditions. Variation in immune activity and parasite resistance in response to changes in environmental temperature, population density and food quality have been shown in many invertebrate species. 2. Almost all studies to date have examined the effects of individual variables in isolation. The aim of this study was to address whether environmental factors interact to produce synergistic effects on phenoloxidase (PO) activity and haemocyte count, both indicators of immune system activity. Temperature, food quality and density were varied in a fully factorial design for a total of eight treatment combinations. 3. Strong interactions between the three environmental variables led to the magnitude and in some cases the direction of the effect of most variables changing as the other environmental factors were altered. Overall, food quality had the most important and consistent influence, larvae raised on a good-quality diet having substantially higher PO activity in every case and substantially higher haemocyte counts in all treatments except unheated/low density. 4. When food quality was good, the larvae showed 'density-dependent prophylaxis': raising their investment in immunity when population density is high. When food quality was poor and the temperature low, however, those larvae raised at high densities invested less in immunity. 5. Increased temperature is often thought to lead to increased immune reactivity in ectotherms, but we found that the effect of temperature was strongly dependent on the values of other environmental variables. PO activity increased with temperature when larvae were raised on good food or when density was high, but when food was poor and density low, a higher temperature led to reduced PO activity. A higher temperature led to higher haemocyte counts when density was high and food quality was poor, but in all other cases, the effect of increased temperature was either close to zero or somewhat negative. 6. Although PO activity and haemocyte count were weakly correlated across the whole data set, there were a number of treatments where the two measures responded in different ways to environmental change. Overall, effect sizes for PO activity were substantially higher than those for haemocyte count, indicating that the different components of the immune system vary in their sensitivity to environmental change. 7. Predictions of the effect of environmental or population change on immunity and disease dynamics based on laboratory experiments that only investigate the effects of single variable are likely to be inaccurate or even entirely wrong. © 2011 The Authors. Journal of Animal Ecology © 2011 British Ecological Society.

Phase evolution, characterisation, and performance of cement prepared in an oxy-fuel atmosphere.

PubMed

Zheng, Liya; Hills, Thomas P; Fennell, Paul

2016-10-20

Cement manufacture is one of the major contributors (7-10%) to global anthropogenic CO 2 emissions. Carbon capture and storage (CCS) has been identified as a vital technology for decarbonising the sector. Oxy-fuel combustion, involving burning fuel in a mixture of recycled CO 2 and pure O 2 instead of air, makes CO 2 capture much easier. Since it combines a theoretically lower energy penalty with an increase in production, it is attractive as a CCS technology in cement plants. However, it is necessary to demonstrate that changes in the clinkering atmosphere do not reduce the quality of the clinker produced. Clinkers were successfully produced in an oxy-fuel atmosphere using only pure oxides as raw materials as well as a mixture of oxides and clay. Then, CEM I cements were prepared by the addition of 5 wt% gypsum to the clinkers. Quantitative XRD and XRF were used to obtain the phase and elemental compositions of the clinkers. The particle size distribution and compressive strength of the cements at 3, 7, 14, and 28 days' ages were tested, and the effect of the particle size distribution on the compressive strength was investigated. Additionally, the compressive strength of the cements produced in oxy-fuel atmospheres was compared with those of the cement produced in air and commercially available CEMEX CEM I. The results show that good-quality cement can be successfully produced in an oxy-fuel atmosphere and it has similar phase and chemical compositions to CEM I. Additionally, it has a comparable compressive strength to the cement produced in air and to commercially available CEMEX CEM I.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marker, Terry; Roberts, Michael; Linck, Martin

Cellulosic and woody biomass can be directly converted to hydrocarbon gasoline and diesel blending components through the use of a new, economical, technology named integrated hydropyrolysis plus hydroconversion (IH2). The IH2 gasoline and diesel blending components are fully compatible with petroleum based gasoline and diesel, contain less than 1% oxygen and have less than 1 total acid number (TAN). The IH2 gasoline is high quality and very close to a drop in fuel. The life cycle analysis (LCA) shows that the use of the IH2 process to convert wood to gasoline and diesel results in a greater than 90% reductionmore » in greenhouse gas emission compared to that found with fossil derived fuels. The technoeconomic analysis showed the conversion of wood using the IH2 process can produce gasoline and diesel at less than $2.00/gallon. In this project, the previously reported semi-continuous small scale IH2 test results were confirmed in a continuous 50 kg/day pilot plant. The continuous IH2 pilot plant used in this project was operated round the clock for over 750 hours and showed good pilot plant operability while consistently producing 26-28 wt % yields of high quality gasoline and diesel product. The IH2 catalyst showed good stability, although more work on catalyst stability is recommended. Additional work is needed to commercialize the IH2 technology including running large particle size biomass, modeling the hydropyrolysis step, studying the effects of process variables and building and operating a 1-50 ton/day demonstration scale plant. The IH2 is a true game changing technology by utilizing U.S. domestic renewable biomass resources to create transportation fuels, sufficient in quantity and quality to substantially reduce our reliance on foreign crude oil. Thus, the IH2 technology offers a path to genuine energy independence for the U. S., along with the creation of a significant number of new U.S. jobs to plant, grow, harvest, and process biomass crops into fungible fuels.« less

Colour Light And Wellbeing: A Case Study Of M Mall 020 George Town, Penang Island

NASA Astrophysics Data System (ADS)

Aqbar Zakaria, Safial; Yii Rou, Ng; Zhi En, Hoi; Iyian, Tai

2017-12-01

Contrary to popular belief, the brightest light or the most colourful light makes good lighting design. However, what makes a good lighting design in interior space is an impeccable composite of art and science. With the application of good lighting design, it can produce an impressive result from enhancing the aesthetic of architectural elements to conveying the right type of ambiance of the interiors. This research intends to address the crucial issues regarding the ways in which lighting designers can communicate the benefits of good lighting and to create a better awareness to users. The objectives of this paper are to outline and explore the features of good and poor lighting design in M Mall O2O based on the lighting design language and profession. The results of this research are mainly qualitative in nature, supported by the professional lighting designers on the definitions of good lighting, personal observation and visual data which were taken in George Town, Penang Island. The case studies on good and poor lighting portrayed in this mall were used as examples to scrutinize the issues raised herein. To achieve the optimum lighting design, a joint approach of focusing on the artistic flair brought forth by lighting and more scientific effort on the calculation levels of lights is crucial. Different functionality requires a different amount of attention on either approach. In conclusion, a good lighting design must be able to enhance the atmosphere and also enrich the quality of the interior architecture. Apart from that, a good lighting design should have good distribution of brightness levels, contrast and different colour temperatures to enhance characters of the interior spaces without neglecting the health and wellbeing aspects.

Design of a robust baseband LPC coder for speech transmission over 9.6 kbit/s noisy channels

NASA Astrophysics Data System (ADS)

Viswanathan, V. R.; Russell, W. H.; Higgins, A. L.

1982-04-01

This paper describes the design of a baseband Linear Predictive Coder (LPC) which transmits speech over 9.6 kbit/sec synchronous channels with random bit errors of up to 1%. Presented are the results of our investigation of a number of aspects of the baseband LPC coder with the goal of maximizing the quality of the transmitted speech. Important among these aspects are: bandwidth of the baseband, coding of the baseband residual, high-frequency regeneration, and error protection of important transmission parameters. The paper discusses these and other issues, presents the results of speech-quality tests conducted during the various stages of optimization, and describes the details of the optimized speech coder. This optimized speech coding algorithm has been implemented as a real-time full-duplex system on an array processor. Informal listening tests of the real-time coder have shown that the coder produces good speech quality in the absence of channel bit errors and introduces only a slight degradation in quality for channel bit error rates of up to 1%.

Quality characteristics of gluten-free cookies made of buckwheat, corn, and rice flour with/without transglutaminase.

PubMed

Altındağ, Gülçin; Certel, Muharrem; Erem, Fundagül; İlknur Konak, Ülgen

2015-04-01

Buckwheat is one of the most valuable pseudo-cereals in terms of its nutritional composition, and it is suitable for celiac patients because of its gluten-free characteristic. However, gluten is the main structure-forming protein responsible for the development of structure in baked products. Therefore, it is a challenge to produce high-quality gluten-free products. Transglutaminase addition is a relatively common application used in the production of gluten-free baked goods. The objective of this study was to investigate the combination of buckwheat flour with rice and corn flour at different levels in gluten-free cookie formulations and the impact of transglutaminase on the quality of cookies. Quality parameters evaluated were proximal chemical composition, spread ratio, color, and textural parameters (hardness and fracturability). Spread ratio, protein, crude fiber, ash content, and also b* and hardness values were significantly (p < 0.05) affected by flour combinations. Further, addition of transglutaminase resulted in increased moisture content, spread ratio, and fracturability but decreased hardness values. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Variability in the relationships among voice quality, harmonic amplitudes, open quotient, and glottal area waveform shape in sustained phonationa

PubMed Central

Kreiman, Jody; Shue, Yen-Liang; Chen, Gang; Iseli, Markus; Gerratt, Bruce R.; Neubauer, Juergen; Alwan, Abeer

2012-01-01

Increases in open quotient are widely assumed to cause changes in the amplitude of the first harmonic relative to the second (H1*–H2*), which in turn correspond to increases in perceived vocal breathiness. Empirical support for these assumptions is rather limited, and reported relationships among these three descriptive levels have been variable. This study examined the empirical relationship among H1*–H2*, the glottal open quotient (OQ), and glottal area waveform skewness, measured synchronously from audio recordings and high-speed video images of the larynges of six phonetically knowledgeable, vocally healthy speakers who varied fundamental frequency and voice qualities quasi-orthogonally. Across speakers and voice qualities, OQ, the asymmetry coefficient, and fundamental frequency accounted for an average of 74% of the variance in H1*–H2*. However, analyses of individual speakers showed large differences in the strategies used to produce the same intended voice qualities. Thus, H1*–H2* can be predicted with good overall accuracy, but its relationship to phonatory characteristics appears to be speaker dependent. PMID:23039455

Phytoplankton and water quality in a Mediterranean drinking-water reservoir (Marathonas Reservoir, Greece).

PubMed

Katsiapi, Matina; Moustaka-Gouni, Maria; Michaloudi, Evangelia; Kormas, Konstantinos Ar

2011-10-01

Phytoplankton and water quality of Marathonas drinking-water Reservoir were examined for the first time. During the study period (July-September 2007), phytoplankton composition was indicative of eutrophic conditions although phytoplankton biovolume was low (max. 2.7 mm³ l⁻¹). Phytoplankton was dominated by cyanobacteria and diatoms, whereas desmids and dinoflagellates contributed with lower biovolume values. Changing flushing rate in the reservoir (up to 0.7% of reservoir's water volume per day) driven by water withdrawal and occurring in pulses for a period of 15-25 days was associated with phytoplankton dynamics. Under flushing pulses: (1) biovolume was low and (2) both 'good' quality species and the tolerant to flushing 'nuisance' cyanobacterium Microcystis aeruginosa dominated. According to the Water Framework Directive, the metrics of phytoplankton biovolume and cyanobacterial percentage (%) contribution indicated a moderate ecological water quality. In addition, the total biovolume of cyanobacteria as well as the dominance of the known toxin-producing M. aeruginosa in the reservoir's phytoplankton indicated a potential hazard for human health according to the World Health Organization.

An Artificial Intelligence System to Predict Quality of Service in Banking Organizations

PubMed Central

Popovič, Aleš

2016-01-01

Quality of service, that is, the waiting time that customers must endure in order to receive a service, is a critical performance aspect in private and public service organizations. Providing good service quality is particularly important in highly competitive sectors where similar services exist. In this paper, focusing on banking sector, we propose an artificial intelligence system for building a model for the prediction of service quality. While the traditional approach used for building analytical models relies on theories and assumptions about the problem at hand, we propose a novel approach for learning models from actual data. Thus, the proposed approach is not biased by the knowledge that experts may have about the problem, but it is completely based on the available data. The system is based on a recently defined variant of genetic programming that allows practitioners to include the concept of semantics in the search process. This will have beneficial effects on the search process and will produce analytical models that are based only on the data and not on domain-dependent knowledge. PMID:27313604

An Artificial Intelligence System to Predict Quality of Service in Banking Organizations.

PubMed

Castelli, Mauro; Manzoni, Luca; Popovič, Aleš

2016-01-01

Quality of service, that is, the waiting time that customers must endure in order to receive a service, is a critical performance aspect in private and public service organizations. Providing good service quality is particularly important in highly competitive sectors where similar services exist. In this paper, focusing on banking sector, we propose an artificial intelligence system for building a model for the prediction of service quality. While the traditional approach used for building analytical models relies on theories and assumptions about the problem at hand, we propose a novel approach for learning models from actual data. Thus, the proposed approach is not biased by the knowledge that experts may have about the problem, but it is completely based on the available data. The system is based on a recently defined variant of genetic programming that allows practitioners to include the concept of semantics in the search process. This will have beneficial effects on the search process and will produce analytical models that are based only on the data and not on domain-dependent knowledge.

19 CFR 181.74 - Verification visit procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consent of the Canadian or Mexican exporter or producer of the good or producer of the material whose... otherwise provided in paragraph (d) of this section, where a Canadian or Mexican exporter or producer of a good, or a Canadian or Mexican producer of a material, has not given its written consent to a proposed...

Quality assurance in forensic odontology

PubMed

Solheim, T

2018-05-30

Quality assurance or quality control is a term and concept coming from the industry. Here it is most important. All products must have a minimum quality and variation in size, for example, must be kept within certain strict limits. There must be a system to control this. May be not every single product is controlled, but spot tests must be taken. Measures must be taken to improve the quality if it is not good enough. This concept has been transferred to medicine, odontology, and consequently also to forensic odontology. These areas have in common with industry the production of that certain products. However, they are usually handmade and not produced in an industrial process. In addition, dentistry is a great deal of art and judgement and quality control of these factors may be difficult. In this paper, I will focus on forensic odontology. What are the problems? What can we do and cannot do? In addition, how can we assure the quality of the work, the assessment and conclusion, and the report? I have some personal opinions on that and I will give some suggestions. Quality assurance on an international level is difficult. Conditions and juridical systems are different in different countries. Especially forensic odontologists are different and have different opinions. This presentation will be relevant to the ongoing discussion and attempts at revising the IOFOS' guidelines for quality assurance.

Theory for the evolution of diffusible external goods.

PubMed

Driscoll, William W; Pepper, John W

2010-09-01

Organisms from prokaryotes to plants and animals make costly investments in diffusible beneficial external products. While the costs of producing such products are born only by the producer, the benefits may be distributed more widely. How are external goods-producing populations stabilized against invasion by nonproducing variants that receive the benefits without paying the cost? This question parallels the classic question of altruism, but because external goods production need not be altruistic per se, a broader range of conditions may lead to the maintenance of these traits. We start from the physics of diffusion to develop an expression for the conditions that favor the production of diffusible external goods. Important variables in determining the evolutionary outcome include the diffusion coefficient of the good, the distance between individuals, and the uptake rate of the external good. These variables join the coefficient of relatedness and the cost/benefit ratio in an expanded form of Hamilton's rule that includes both selfish and altruistic paths to the evolution of external goods strategies. This expanded framework can be applied to any external goods trait, and is a useful heuristic even when it is difficult to quantify the fitness consequences of producing the good. © 2010 The Author(s). Journal compilation © 2010 The Society for the Study of Evolution.

Validity and reliability of a novel measure of activity performance and participation.

PubMed

Murgatroyd, Phil; Karimi, Leila

2016-01-01

To develop and evaluate an innovative clinician-rated measure, which produces global numerical ratings of activity performance and participation. Repeated measures study with 48 community-dwelling participants investigating clinical sensibility, comprehensiveness, practicality, inter-rater reliability, responsiveness, sensitivity and concurrent validity with Barthel Index. Important clinimetric characteristics including comprehensiveness and ease of use were rated >8/10 by clinicians. Inter-rater reliability was excellent on the summary scores (intraclass correlation of 0.95-0.98). There was good evidence that the new outcome measure distinguished between known high and low functional scoring groups, including both responsiveness to change and sensitivity at the same time point in numerous tests. Concurrent validity with the Barthel Index was fair to high (Spearman Rank Order Correlation 0.32-0.85, p > 0.05). The new measure's summary scores were nearly twice as responsive to change compared with the Barthel Index. Other more detailed data could also be generated by the new measure. The Activity Performance Measure is an innovative outcome instrument that showed good clinimetric qualities in this initial study. Some of the results were strong, given the sample size, and further trial and evaluation is appropriate. Implications for Rehabilitation The Activity Performance Measure is an innovative outcome measure covering activity performance and participation. In an initial evaluation, it showed good clinimetric qualities including responsiveness to change, sensitivity, practicality, clinical sensibility, item coverage, inter-rater reliability and concurrent validity with the Barthel Index. Further trial and evaluation is appropriate.

Building a strategy for soil protection at local and regional scale--the case of agricultural wastes landspreading.

PubMed

Doula, M K; Sarris, A; Hliaoutakis, A; Kydonakis, A; Papadopoulos, N S; Argyriou, L

2016-03-01

Agricultural wastes (AW) are produced in huge quantities worldwide and may cause detrimental effects on environmental quality, affecting soil, water, and air quality. Given the growing soil degradation worldwide, the need for more food of good quality and therefore the intensified agriculture, it is important to develop recycling plans even for those types of treated AW (e.g., composts) that are not considered hazardous. Two strategic approaches for safe and sustainable landspreading of organic wastes are proposed, depending on wastes properties and hazard potential, i.e., an approach appropriate for traditionally used wastes (manures and composts) and another approach for wastes that are potentially hazardous or hazardous and should only be reused under specific restrictions. Both approaches foresee concrete steps, require close cooperation between farmers and local/regional authorities, and are appropriate to ensure environmental sustainability at AW recycling or disposal areas. Desktop and web application tools are also presented that are anticipated to assist authorities in implementing their monitoring strategies.

Facial and bodily correlates of family background.

PubMed

Boothroyd, Lynda G; Perrett, David I

2006-09-22

It has been suggested that absence of the father during early childhood has long-reaching effects on reproductive strategy and development of offspring. This paper reports two studies designed to investigate the physical characteristics of daughters associated with father absence. Study 1 used a facial averaging method to produce composite images of faces of women whose parents separated during their childhood (who were 'father absent'), women whose parents remained together, but had poor quality relationships and women whose parents were together and had good quality relationships. Images were then rated by male and female judges. Father absence and poor parental relationships were associated with apparent facial masculinity and reduced attractiveness in daughters. Poor parental relationships were also associated with reduced apparent health. Study 2 compared family background with body measurements and found that father absence or a poor quality relationship between parents were associated with body masculinity (high waist-to-hip ratio) and increased weight-for-height and adiposity. These results highlight the possibility of physical masculinization being associated with purported father absence 'effects'.

Relation between ultrasonic properties, rheology and baking quality for bread doughs of widely differing formulation.

PubMed

Peressini, Donatella; Braunstein, Dobrila; Page, John H; Strybulevych, Anatoliy; Lagazio, Corrado; Scanlon, Martin G

2017-06-01

The objective was to evaluate whether an ultrasonic reflectance technique has predictive capacity for breadmaking performance of doughs made under a wide range of formulation conditions. Two flours of contrasting dough strength augmented with different levels of ingredients (inulin, oil, emulsifier or salt) were used to produce different bread doughs with a wide range of properties. Breadmaking performance was evaluated by conventional large-strain rheological tests on the dough and by assessment of loaf quality. The ultrasound tests were performed with a broadband reflectance technique in the frequency range of 0.3-6 MHz. Principal component analysis showed that ultrasonic attenuation and phase velocity at frequencies between 0.3 and 3 MHz are good predictors for rheological and bread scoring characteristics. Ultrasonic parameters had predictive capacity for breadmaking performance for a wide range of dough formulations. Lower frequency attenuation coefficients correlated well with conventional quality indices of both the dough and the bread. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

The value of reducing hospital-acquired pressure ulcer prevalence: an illustrative analysis.

PubMed

Spetz, Joanne; Brown, Diane S; Aydin, Carolyn; Donaldson, Nancy

2013-04-01

The aim of this study was to assess the cost savings associated with implementing nursing approaches to prevent hospital-acquired pressure ulcers (HAPU). Hospitals face substantial costs associated with the treatment of HAPUs. Interventions have been demonstrated as effective for HAPU prevention and management, but it is widely perceived that preventative measures are expensive and, thus, may not be a good use of resources. A return-on-investment (ROI) framework from the Agency for Healthcare Research and Quality (AHRQ) Quality Indicators Toolkit was used for this study. The researchers identified achievable improvements in HAPU rates from data from the Collaborative Alliance for Nursing Outcomes and measured costs and savings associated with HAPU reduction from published literature. The analysis produced a baseline ROI ratio of 1.61 and net savings of $127.51 per patient. Hospital-acquired pressure ulcer surveillance and prevention can be cost saving for hospitals and should be considered by nurse executives as a strategy to support quality outcomes.

Experience with distant pathology demonstrations for clinicians in hospitals without local pathologists through the Swedish telepathology work station.

PubMed

Boeryd, B R

1995-01-01

Conferences between pathologists and clinicians are routinely important at each hospital which has its own department of pathology. With the aid of telepathology, such conferences can be facilitated to provide results similar to those in hospitals with their own pathological service. Our Department serves the hospital in Motala, which is located 50 km west of Linköping. We now have telepathology conferences every second week with the surgeons and every second week with colleagues in internal medicine. The equipment we use is LabEye, which is produced by Innovativ Vision AB in Linköping. This equipment includes mouse pointers at both stations which are always visible in the images at both ends of the system. The quality of images received in Motala is very good, allowing discussion of details regarding the specimens, especially the cytological ones. Our experiences with these conferences have been very good.

Jack bean (Canavalia ensiformis): nutrition related aspects and needed nutrition research.

PubMed

Akpapunam, M A; Sefa-Dedeh, S

1997-01-01

The nutritional characteristics and food potentials of jack bean (Canavalia ensiformis) have been reviewed. The bean is a good sources of protein, 23% to 34%, and carbohydrate 55%. It is also a good source of Ca, Zn, P, Mg, Cu and Ni. Jack bean protein is adequate in most essential amino acids with the exception of methionine and cystine which may be nutritionally limiting. Antinutritional and toxic factors including trypsin inhibitors, hemagglutinins, cyanogen glucosides, oligosaccharides and others are present in jack bean. Properly processed jack bean could be used to prepare some of the popular dishes made from cowpea, peanut, pigeon pea and soybean. Industrial products such as protein concentrates and isolates, starch, flakes, grits and flours can be produced from the bean. Further research is needed to identify varieties with high protein and nutritional quality. Development of new highly nutritious food products based on whole or processed jack bean should increase production and expand use.

Silicon-on-ceramic Process: Silicon Sheet Growth and Device Development for the Large-area Silicon Sheet and Cell Development Tasks of the Low-cost Solar Array Project

NASA Technical Reports Server (NTRS)

Chapman, P. W.; Zook, J. D.; Heaps, J. D.; Grung, B. L.; Koepke, B.; Schuldt, S. B.

1979-01-01

Significant progress is reported in fabricating a 4 sq cm cell having a 10.1 percent conversion efficiency and a 10 sq cm cell having a 9.2 percent conversion efficiency. The continuous (SCIM) coater succeeded in producing a 16 sq cm coating exhibiting unidirectional solidification and large grain size. A layer was grown at 0.2 cm/sec in the experimental coater which was partially dendritic but also contained a large smooth area approximately 100 micron m thick. The dark characteristic measurements of a typical SCC solar cell yield shunt resistance values of 10K ohms and series resistance values and 0.4 ohm. The production dip-coater is operating at over 50 percent yield in terms of good cell quality material. The most recent run yielded 13 good substrates out of 15.

Building alternate protein structures using the elastic network model.

PubMed

Yang, Qingyi; Sharp, Kim A

2009-02-15

We describe a method for efficiently generating ensembles of alternate, all-atom protein structures that (a) differ significantly from the starting structure, (b) have good stereochemistry (bonded geometry), and (c) have good steric properties (absence of atomic overlap). The method uses reconstruction from a series of backbone framework structures that are obtained from a modified elastic network model (ENM) by perturbation along low-frequency normal modes. To ensure good quality backbone frameworks, the single force parameter ENM is modified by introducing two more force parameters to characterize the interaction between the consecutive carbon alphas and those within the same secondary structure domain. The relative stiffness of the three parameters is parameterized to reproduce B-factors, while maintaining good bonded geometry. After parameterization, violations of experimental Calpha-Calpha distances and Calpha-Calpha-Calpha pseudo angles along the backbone are reduced to less than 1%. Simultaneously, the average B-factor correlation coefficient improves to R = 0.77. Two applications illustrate the potential of the approach. (1) 102,051 protein backbones spanning a conformational space of 15 A root mean square deviation were generated from 148 nonredundant proteins in the PDB database, and all-atom models with minimal bonded and nonbonded violations were produced from this ensemble of backbone structures using the SCWRL side chain building program. (2) Improved backbone templates for homology modeling. Fifteen query sequences were each modeled on two targets. For each of the 30 target frameworks, dozens of improved templates could be produced In all cases, improved full atom homology models resulted, of which 50% could be identified blind using the D-Fire statistical potential. (c) 2008 Wiley-Liss, Inc.

Effects of temperature on the quality of black garlic.

PubMed

Zhang, Xinyan; Li, Ningyang; Lu, Xiaoming; Liu, Pengli; Qiao, Xuguang

2016-05-01

Black garlic is a type of garlic product that is generally produced by heating raw garlic at high temperature with controlled humidity for more than 30 days. Black garlic has appeared on the market for many years. It is crucial to investigate the characteristics of quality formation of black garlic during processing at various temperatures. In this study, fresh garlic was processed to black garlic at temperatures of 60, 70, 80 and 90 °C. Moisture, amino acid nitrogen and allicin contents decreased gradually during thermal processing of various temperatures. Reducing sugar, 5-hydroxymethylfurfural, total phenols, total acids contents and browning increased. The changing rate of quality indicators and flavour of black garlic varied at different temperatures. Browning intensity reached about 74 when black garlic aged. The sensory score was significantly higher in black garlic aged at 70 °C (39.95 ± 0.31) compared with that at other temperatures, suggesting that 70 °C might facilitate formation of good quality and flavour of black garlic during processing. Temperature had a remarkable impact on the quality and flavour of black garlic. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Method of radiometric quality assessment of NIR images acquired with a custom sensor mounted on an unmanned aerial vehicle

NASA Astrophysics Data System (ADS)

Wierzbicki, Damian; Fryskowska, Anna; Kedzierski, Michal; Wojtkowska, Michalina; Delis, Paulina

2018-01-01

Unmanned aerial vehicles are suited to various photogrammetry and remote sensing missions. Such platforms are equipped with various optoelectronic sensors imaging in the visible and infrared spectral ranges and also thermal sensors. Nowadays, near-infrared (NIR) images acquired from low altitudes are often used for producing orthophoto maps for precision agriculture among other things. One major problem results from the application of low-cost custom and compact NIR cameras with wide-angle lenses introducing vignetting. In numerous cases, such cameras acquire low radiometric quality images depending on the lighting conditions. The paper presents a method of radiometric quality assessment of low-altitude NIR imagery data from a custom sensor. The method utilizes statistical analysis of NIR images. The data used for the analyses were acquired from various altitudes in various weather and lighting conditions. An objective NIR imagery quality index was determined as a result of the research. The results obtained using this index enabled the classification of images into three categories: good, medium, and low radiometric quality. The classification makes it possible to determine the a priori error of the acquired images and assess whether a rerun of the photogrammetric flight is necessary.

Improving iris recognition performance using segmentation, quality enhancement, match score fusion, and indexing.

PubMed

Vatsa, Mayank; Singh, Richa; Noore, Afzel

2008-08-01

This paper proposes algorithms for iris segmentation, quality enhancement, match score fusion, and indexing to improve both the accuracy and the speed of iris recognition. A curve evolution approach is proposed to effectively segment a nonideal iris image using the modified Mumford-Shah functional. Different enhancement algorithms are concurrently applied on the segmented iris image to produce multiple enhanced versions of the iris image. A support-vector-machine-based learning algorithm selects locally enhanced regions from each globally enhanced image and combines these good-quality regions to create a single high-quality iris image. Two distinct features are extracted from the high-quality iris image. The global textural feature is extracted using the 1-D log polar Gabor transform, and the local topological feature is extracted using Euler numbers. An intelligent fusion algorithm combines the textural and topological matching scores to further improve the iris recognition performance and reduce the false rejection rate, whereas an indexing algorithm enables fast and accurate iris identification. The verification and identification performance of the proposed algorithms is validated and compared with other algorithms using the CASIA Version 3, ICE 2005, and UBIRIS iris databases.

Predicting aged pork quality using a portable Raman device.

PubMed

Santos, C C; Zhao, J; Dong, X; Lonergan, S M; Huff-Lonergan, E; Outhouse, A; Carlson, K B; Prusa, K J; Fedler, C A; Yu, C; Shackelford, S D; King, D A; Wheeler, T L

2018-05-29

The utility of Raman spectroscopic signatures of fresh pork loin (1 d & 15 d postmortem) in predicting fresh pork tenderness and slice shear force (SSF) was determined. Partial least square models showed that sensory tenderness and SSF are weakly correlated (R 2  = 0.2). Raman spectral data were collected in 6 s using a portable Raman spectrometer (RS). A PLS regression model was developed to predict quantitatively the tenderness scores and SSF values from Raman spectral data, with very limited success. It was discovered that the prediction accuracies for day 15 post mortem samples are significantly greater than that for day 1 postmortem samples. Classification models were developed to predict tenderness at two ends of sensory quality as "poor" vs. "good". The accuracies of classification into different quality categories (1st to 4th percentile) are also greater for the day 15 postmortem samples for sensory tenderness (93.5% vs 76.3%) and SSF (92.8% vs 76.1%). RS has the potential to become a rapid on-line screening tool for the pork producers to quickly select meats with superior quality and/or cull poor quality to meet market demand/expectations. Copyright © 2018 Elsevier Ltd. All rights reserved.

CID-720 aircraft Langley Research Center preflight hardware tests: Development, flight acceptance and qualification

NASA Technical Reports Server (NTRS)

Pride, J. D.

1986-01-01

The testing conducted on LaRC-developed hardware for the controlled impact demonstration transport aircraft is discussed. To properly develop flight qualified crash systems, two environments were considered: the aircraft flight environment with the focus on vibration and temperature effects, and the crash environment with the long pulse shock effects. Also with the large quantity of fuel in the wing tanks the possibility of fire was considered to be a threat to data retrieval and thus fire tests were included in the development test process. The aircraft test successfully demonstrated the performance of the LaRC developed heat shields. Good telemetered data (S-band) was received during the impact and slide-out phase, and even after the aircraft came to rest. The two onboard DAS tape recorders were protected from the intense fire and high quality tape data was recovered. The complete photographic system performed as planned throughout the 40.0 sec of film supply. The four photo power distribution pallets remained in good condition and all ten onboard 16 mm high speed (400 frames/sec) cameras produced good film data.

The importance of understanding: Model space moderates goal specificity effects.

PubMed

Kistner, Saskia; Burns, Bruce D; Vollmeyer, Regina; Kortenkamp, Ulrich

2016-01-01

The three-space theory of problem solving predicts that the quality of a learner's model and the goal specificity of a task interact on knowledge acquisition. In Experiment 1 participants used a computer simulation of a lever system to learn about torques. They either had to test hypotheses (nonspecific goal), or to produce given values for variables (specific goal). In the good- but not in the poor-model condition they saw torque depicted as an area. Results revealed the predicted interaction. A nonspecific goal only resulted in better learning when a good model of torques was provided. In Experiment 2 participants learned to manipulate the inputs of a system to control its outputs. A nonspecific goal to explore the system helped performance when compared to a specific goal to reach certain values when participants were given a good model, but not when given a poor model that suggested the wrong hypothesis space. Our findings support the three-space theory. They emphasize the importance of understanding for problem solving and stress the need to study underlying processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korol, A.A.; Korol, Y.A.; Kasich-Pilipenko, I.Y.

Melted slip coatings were obtained and the structural changes in the coatings and their substrates upon simultaneous heating by concentrated solar radiant energy fluxes were studied. Well known wear and corrosion resistant TiC-Ni-B and WC-Ni-B coatings 50 to 300 microns thick applied by the slip method to flat or cylindrical stainless steel and titanium specimens were examined. The specimens were heated in an SGU-5 solar heating installation with a 2 m diameter parabolic mirror concentrator in a process chamber with a quartz window under a vacuum. Metallographic analysis revealed a finely dispersed heterogeneous structure with no visible porosity, good bondingmore » of coating to substrate, and uniform distribution of carbide phase in the metal matrix of the TiC-Ni-B coatings on titanium. Results were similar for the other coatings, indicating that concentrated solar energy can produce coatings with satisfactory surface quality, good density, and a framework structure. The coating interacted with the substrate by diffusion. Most of the volume of the substrate underwent no significant changes, indicating good bond strength between coatings and substrate.« less

Value addition of wild apricot fruits grown in North-West Himalayan regions-a review.

PubMed

Sharma, Rakesh; Gupta, Anil; Abrol, G S; Joshi, V K

2014-11-01

Wild apricot (Prunus armeniaca L.) commonly known as chulli is a potential fruit widely distributed in North-West Himalayan regions of the world. The fruits are good source of carbohydrates, vitamins, minerals besides having attractive colour and typical flavour. Unlike table purpose varieties of apricots like New Castle, the fruits of wild apricot are unsuitable for fresh consumption because of its high acid and low sugar content. However, the fruits are traditionally utilized for open sun drying, pulping to prepare different products such as jams, chutney and naturally fermented and distilled liquor. But, scientific literature on processing and value addition of wild apricot is scanty. Preparation of jam with 25 % wild apricot +75 % apple showed maximum score for organoleptic characteristics due to better taste and colour. Osmotic dehydration has been found as a suitable method for drying of wild type acidic apricots. A good quality sauce using wild apricot pulp and tomato pulp in the ratio of 1:1 has been prepared, while chutney of good acceptability prepared from wild apricot pulp (100 %) has also been documented. Preparation of apricot-soy protein enriched products like apricot-soya leather, toffee and fruit bars has been reported, which are reported to meet the protein requirements of adult and children as per the recommendations of ICMR. Besides these processed products, preparation of alcoholic beverages like wine, vermouth and brandy from wild apricot fruits has also been reported by various researchers. Further, after utilization of pulp for preparation of value added products, the stones left over have been successfully utilized for oil extraction which has medicinal and cosmetic value. The traditional method of oil extraction has been reported to be unhygienic and result in low oil yield with poor quality, whereas improved mechanical method of oil extraction has been found to produce good quality oil. The apricot kernel oil and press cake have successfully been utilized for preparation of various value added products such as facial cream, lip balm, essential oil and protein isolate with good quality attributes and consumer acceptability. However, no scientific information on utilization of shells remained after kernel separation is available, but the shells are traditionally utilized for burning purpose during winters by the farmers. Therefore, it seems that every part of wild apricot can be utilized for conversion into value-added products and commercial utilization of this fruit will certainly add value to this underutilized fruit and also increase the economy of farmers.

Use of Tectonagrandis Leaf Extract in Colouring Silk Cloth Material Based on pH and Mordant Variations

NASA Astrophysics Data System (ADS)

Rosyida, A.; Suranto

2018-03-01

One of the very potential use of plant natural colour in the industrial activities was Anthocyanin. This substance contains in a number on plant organs such as Tectona Grandis (Fabaceae) particularly in their leaf materials. In order to get this secondary metabolism, the aim of this research was to find out the optimum condition of mordant and the pH combination in producing natural colour of Tectonagrandis leaf extract. To get this chemical substance, 1 kilogram of young leaves were cut into smaller size and soaked in 7 litre of H2O for 12 hour9. The solution was then boiled for 15 minutes. To get the best colour, variations of pH (5, 7 and 9) respectivelly were applied. The results showed that purple to redness were resulted when pH 5 and no additional mordant was added. Conversly the greyness to black, were produced when ferrosulphate were added. When the addition of alum was made the redies purple will appear. These colours were considered quite good quality under examination of grey and staining scales (4-5) after treated by both wet and dry rubbing methods. The test for wash fastness resulted in sufficiently good value of color change (value of 3 on Grey Scale standard), while test for staining demonstrated good staining (value of 4 on Staining Scale standard). This early finding was quite promosing to be applied in the near future in providing natural colours for industrial purposes.

Automatic welding of stainless steel tubing

NASA Technical Reports Server (NTRS)

Clautice, W. E.

1978-01-01

The use of automatic welding for making girth welds in stainless steel tubing was investigated as well as the reduction in fabrication costs resulting from the elimination of radiographic inspection. Test methodology, materials, and techniques are discussed, and data sheets for individual tests are included. Process variables studied include welding amperes, revolutions per minute, and shielding gas flow. Strip chart recordings, as a definitive method of insuring weld quality, are studied. Test results, determined by both radiographic and visual inspection, are presented and indicate that once optimum welding procedures for specific sizes of tubing are established, and the welding machine operations are certified, then the automatic tube welding process produces good quality welds repeatedly, with a high degree of reliability. Revised specifications for welding tubing using the automatic process and weld visual inspection requirements at the Kennedy Space Center are enumerated.

Progressive compressive imager

NASA Astrophysics Data System (ADS)

Evladov, Sergei; Levi, Ofer; Stern, Adrian

2012-06-01

We have designed and built a working automatic progressive sampling imaging system based on the vector sensor concept, which utilizes a unique sampling scheme of Radon projections. This sampling scheme makes it possible to progressively add information resulting in tradeoff between compression and the quality of reconstruction. The uniqueness of our sampling is that in any moment of the acquisition process the reconstruction can produce a reasonable version of the image. The advantage of the gradual addition of the samples is seen when the sparsity rate of the object is unknown, and thus the number of needed measurements. We have developed the iterative algorithm OSO (Ordered Sets Optimization) which employs our sampling scheme for creation of nearly uniform distributed sets of samples, which allows the reconstruction of Mega-Pixel images. We present the good quality reconstruction from compressed data ratios of 1:20.

An Implementation of the Salt-Farm Monitoring System Using Wireless Sensor Network

NASA Astrophysics Data System (ADS)

Ju, Jonggil; Park, Ingon; Lee, Yongwoong; Cho, Jongsik; Cho, Hyunwook; Yoe, Hyun; Shin, Changsun

In producing solar salt, natural environmental factors such as temperature, humidity, solar radiation, wind direction, wind speed and rain are essential elements which influence on the productivity and quality of salt. If we can manage the above mentioned environmental elements efficiently, we could achieve improved results in production of salt with good quality. To monitor and manage the natural environments, this paper suggests the Salt-Farm Monitoring System (SFMS) which is operated with renewable energy power. The system collects environmental factors directly from the environmental measure sensors and the sensor nodes. To implement a stand-alone system, we applied solar cell and wind generator to operate this system. Finally, we showed that the SFMS could monitor the salt-farm environments by using wireless sensor nodes and operate correctly without external power supply.

Geology and ground-water resources of the Douglas basin, Arizona, with a section on chemical quality of the ground water

USGS Publications Warehouse

Coates, Donald Robert; Cushman, R.L.; Hatchett, James Lawrence

1955-01-01

year period 1947-51, inclusive. Most irrigation wells in the Douglas basin are less than 200 feet in depth and usually produce less than 400 gpm (gallons per minute). The average specific capacity of the wells is about 12 gpm per foot of drawdown. Although water in some parts of the basin is artesian, all irrigation wells must be pumped. Ground water in the basin is generally of excellent to good quality for irrigation use, In small areas along the southern part of Whitewater Draw and east of Douglas the ground water is high in dissolved-solids content. Although most of the water is hard, it is generally satisfactory for domestic use. In many areas the fluoride content is more than 1.5 ppm (parts per million).

[The primary research and development of software oversampling mapping system for electrocardiogram].

PubMed

Zhou, Yu; Ren, Jie

2011-04-01

We put forward a new concept of software oversampling mapping system for electrocardiogram (ECG) to assist the research of the ECG inverse problem to improve the generality of mapping system and the quality of mapping signals. We then developed a conceptual system based on the traditional ECG detecting circuit, Labview and DAQ card produced by National Instruments, and at the same time combined the newly-developed oversampling method into the system. The results indicated that the system could map ECG signals accurately and the quality of the signals was good. The improvement of hardware and enhancement of software made the system suitable for mapping in different situations. So the primary development of the software for oversampling mapping system was successful and further research and development can make the system a powerful tool for researching ECG inverse problem.

Overview on the General Approaches to Improve Gluten-Free Pasta and Bread

PubMed Central

Padalino, Lucia; Conte, Amalia; Del Nobile, Matteo Alessandro

2016-01-01

The use of gluten-free products is increasing since a growing number of people are suffering from celiac disease and thereby need gluten-free diet. Gluten is responsible for the visco-elastic characteristics of wheat-based products; therefore, its lack makes the gluten-free products not similar to wheat-based product, with scarce textural properties. This reason constitutes the major industrial limitation. Thus, obtaining good-quality gluten-free products represents a technological challenge. This review reports the main strategies adopted to produce high quality gluten-free pasta and bread. They are mainly obtained by the utilization of specific ingredients (hydrocolloids, proteins or enzymes) to be incorporated into the standard formulation or the adoption of proper technological variables that can enhance above all the functional properties, the texture and the taste. PMID:28231182

Indoor Air Quality in Schools: Clean Air Is Good Business.

ERIC Educational Resources Information Center

Guarneiri, Michele A.

2003-01-01

Describes the effect of poor indoor air quality (IAQ) on student health, the cost of safeguarding good IAQ, the cause of poor IAQ in schools, how to tell whether a school has an IAQ problem, and how the U.S. Environmental Protection Agency can help schools improve indoor air quality though the use of their free "Indoor Air Quality Tools for…

Poor tap water quality experiences and poor sleep quality during the Flint, Michigan Municipal Water Crisis.

PubMed

Kruger, Daniel J; Kodjebacheva, Gergana D; Cupal, Suzanne

2017-08-01

After inadequate official response to community concerns over water quality following changes in Flint's municipal water supply, this study sought evidence for a relationship between water quality and community mental health. The Speak to Your Health Community Survey is a community-based participatory component of the health surveillance system in Genesee County, Michigan. This cross-sectional survey recruits participants from every residential Census Tract of the county and strives for demographic representativeness. Respondents (n=834) rated their tap water quality (taste, smell, appearance) as poor (36%), fair (18%), good (20%), very good (17%), and excellent (10%). They rated their sleep quality as poor (12%), fair (28%), good (39%), very good (18%), and excellent (4%), and had an average (SD) sleep length of 408(90) minutes. Controlling for age, sex, years of education, and whether respondents were African American and Hispanic/Latino/a, lower perceived tap water quality was associated with lower sleep quality and shorter sleep length. Results indicate that adverse health conditions related to the water crisis extend beyond lead poisoning in children and include deterioration of sleep conditions among adult residents. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

[Identification of Good-Practice Projects in Promoting Physical Activity - Methods, Pitfalls and Sampled Outcomes].

PubMed

Henn, Annette; Karger, Claudia; Wöhlken, Katrin; Meier, Diana; Ungerer-Röhrich, Ulrike; Graf, Christine; Woll, Alexander

2017-03-01

The aim of this paper is to identify and show examples of good practice of public health promotion. For this, uniform quality criteria were worked out under consideration of national and international scientific literature.For the identification of examples of good practice, a comparison of different quality criteria was carried out and combined with each other in a first step. In the following step, examples of good practice were identified after a comprehensive search. The choice of the "good-practice" projects is exemplary and lays no claim to completeness.6 main quality criteria (QC) of programs promoting physical activity could be identified in the national and international context. The analysis showed altogether 10 projects which can exemplarily be classified as examples of good practice of the target groups of children and teenagers, adults, older people and people with pre-existing illnesses. These projects, however, show major differences in their (methodological) quality.The analysis reports a lack of "Good-Practice" examples. Deficits lie mainly in documentation and sustainability. Because of incomplete documentation, an assessment as a "Good-Practice" example is only possible to a limited extent; a lot of information, particularly in the evaluation, is missing. © Georg Thieme Verlag KG Stuttgart · New York.

29 CFR 776.16 - Employment in “producing, * * * or in any other manner working on” goods.

Code of Federal Regulations, 2010 CFR

2010-07-01

... “commerce” only and not engagement in “production” of the goods when it is done by employees of a common... “producing, * * * or in any other manner working on” goods. (a) Coverage in general. Employees employed in... in the “production” of such goods, within the meaning of the Act. Such employees have been within the...

29 CFR 776.16 - Employment in “producing, * * * or in any other manner working on” goods.

Code of Federal Regulations, 2011 CFR

2011-07-01

... “commerce” only and not engagement in “production” of the goods when it is done by employees of a common... “producing, * * * or in any other manner working on” goods. (a) Coverage in general. Employees employed in... in the “production” of such goods, within the meaning of the Act. Such employees have been within the...

Pressure variation of developed lapping tool on surface roughness

NASA Astrophysics Data System (ADS)

Hussain, A. K.; Lee, K. Q.; Aung, L. M.; Abu, A.; Tan, L. K.; Kang, H. S.

2018-01-01

Improving the surface roughness is always one of the major concerns in the development of lapping process as high precision machining caters a great demand in manufacturing process. This paper aims to investigate the performance of a newly designed lapping tool in term of surface roughness. Polypropylene is used as the lapping tool head. The lapping tool is tested for different pressure to identify the optimum working pressure for lapping process. The theoretical surface roughness is also calculated using Vickers Hardness. The present study shows that polypropylene is able to produce good quality and smooth surface roughness. The optimum lapping pressure in the present study is found to be 45 MPa. By comparing the theoretical and experimental values, the present study shows that the newly designed lapping tool is capable to produce finer surface roughness.

Robust Mosaicking of Stereo Digital Elevation Models from the Ames Stereo Pipeline

NASA Technical Reports Server (NTRS)

Kim, Tae Min; Moratto, Zachary M.; Nefian, Ara Victor

2010-01-01

Robust estimation method is proposed to combine multiple observations and create consistent, accurate, dense Digital Elevation Models (DEMs) from lunar orbital imagery. The NASA Ames Intelligent Robotics Group (IRG) aims to produce higher-quality terrain reconstructions of the Moon from Apollo Metric Camera (AMC) data than is currently possible. In particular, IRG makes use of a stereo vision process, the Ames Stereo Pipeline (ASP), to automatically generate DEMs from consecutive AMC image pairs. However, the DEMs currently produced by the ASP often contain errors and inconsistencies due to image noise, shadows, etc. The proposed method addresses this problem by making use of multiple observations and by considering their goodness of fit to improve both the accuracy and robustness of the estimate. The stepwise regression method is applied to estimate the relaxed weight of each observation.

Characteristics and management of flowback/produced water from hydraulically fractured wells in California - findings from the California SB 4 assessment

NASA Astrophysics Data System (ADS)

Varadharajan, C.; Cooley, H.; Heberger, M. G.; Stringfellow, W. T.; Domen, J. K.; Sandelin, W.; Camarillo, M. K.; Jordan, P. D.; Reagan, M. T.; Donnelly, K.; Birkholzer, J. T.; Long, J. C. S.

2015-12-01

As part of a recent assessment of well stimulation in California, we analyzed the hazards and potential impacts of hydraulic fracturing (the primary form of well stimulation in California) on water resources, which included an analysis of the quantity and quality of flowback/produced water generated, current management and disposal practices, associated potential release mechanisms and transport pathways that can lead to contaminants being released into the environment, and practices to mitigate or avoid impacts from produced water on water resources. The wastewater returned after stimulation includes "recovered fluids" (flowback fluids collected into tanks following stimulation, but before the start of production) and "produced water" (water extracted with oil and gas during production). In contrast to hydraulic fracturing in regions with primarily gas production, the quantities of recovered fluids from hydraulically fractured wells in California are small in comparison to the fluids injected (typically <5%), and large quantities of produced water are generated. Our analysis indicates some fraction of returning fracturing fluids is likely present in produced water from wells that have been hydraulically fractured. Chemical measurements of recovered fluids show that some samples can contain high levels of some contaminants, including total carbohydrates (indicating the presence of guar, a component of fracturing fluid), total dissolved solids (TDS), trace elements and naturally occurring radioactive material (NORM). Data on produced water chemistry are more limited. In California, produced water is typically managed via pipelines and disposed or reused in many ways. A majority of produced water from hydraulically fractured wells in California is disposed in percolation pits, many of which may lie in areas with good groundwater quality. Some of the remaining produced water is injected into Class II wells; although a few of the wells are under review or have been shut down since they were injecting into aquifers. Other methods of management of produced water include reuse for irrigation and discharge into sewer systems. Each of these disposal and reuse methods presents its own unique set of concerns that need to be considered together, in designing a produced water management plan.

"Parisara": Developing a Collaborative, Free, Public Domain Knowledge Resource on Indian Environment

ERIC Educational Resources Information Center

Gadgil, Madhav

2012-01-01

To address the important challenge of taking good care of India's environment, substantial, good quality information is crucial. Unfortunately, pertinent information is in very short supply. Much of the nationally collected information lacks quality and is incomplete. Modern science has demonstrated that good information flows from an open,…

Teacher Quality. Education Policy White Paper

ERIC Educational Resources Information Center

Wilson, Suzanne, Ed.

2009-01-01

Good teaching matters. There is persuasive evidence that students benefit from high quality instruction and that these benefits are cumulative for students who have good teachers for several years. Teacher effectiveness matters so much that low-income students lucky enough to have three very good teachers in a row in elementary school earn test…

Protecting our environmental wealth: Connecting ecosystem goods and services to human well-being

EPA Science Inventory

Ecosystems produce essential outputs upon which people’s well-being and livelihood depend. These outputs are referred to as “ecosystem goods and services” (EGS). National accounting systems do not track the goods and services produced by ecosystems, and we do not have a consist...

Development of Final Ecosystem Goods and Services Indicators for Estuaries and Coasts

EPA Science Inventory

Ecosystem services are those goods and services produced by the environment that benefit people. The concept aims to aid in the assessment of tradeoffs based on goods and services produced by the environment. Over the past seven years EPA has developed a framework for classificat...

Linearization of an annular image by using a diffractive optic

NASA Technical Reports Server (NTRS)

Matthys, Donald R.

1996-01-01

The goal for this project is to develop the algorithms for fracturing the zones defined by the mapping transformation, and to actually produce the binary optic in an appropriate setup. In 1984 a side-viewing panoramic viewing system was patented, consisting of a single piece of glass with spherical surfaces which produces a 360 degree view of the region surrounding the lens which extends about 25 degrees in front of and 20 degrees behind the lens. The system not only produces images of good quality, it is also afocal, i.e., images stay in focus for objects located right next to the lens as well as those located far from the lens. The lens produced a panoramic view in an annular shaped image, and so the lens was called a PAL (panoramic annular lens). When applying traditional measurements to PAL images, it is found advantageous to linearize the annular image. This can easily be done with a computer and such a linearized image can be produced within about 40 seconds on current microcomputers. However, this process requires a frame-grabber and a computer, and is not real-time. Therefore, it was decided to try to perform this linearization optically by using a diffractive optic.

YouTube as a Potential Training Resource for Laparoscopic Fundoplication.

PubMed

Frongia, Giovanni; Mehrabi, Arianeb; Fonouni, Hamidreza; Rennert, Helga; Golriz, Mohammad; Günther, Patrick

To analyze the surgical proficiency and educational quality of YouTube videos demonstrating laparoscopic fundoplication (LF). In this cross-sectional study, a search was performed on YouTube for videos demonstrating the LF procedure. The surgical and educational proficiency was evaluated using the objective component rating scale, the educational quality rating score, and total video quality score. Statistical significance was determined by analysis of variance, receiver operating characteristic curve, and odds ratio analysis. A total of 71 videos were included in the study; 28 (39.4%) videos were evaluated as good, 23 (32.4%) were moderate, and 20 (28.2%) were poor. Good-rated videos were significantly longer (good, 22.0 ± 5.2min; moderate, 7.8 ± 0.9min; poor, 8.5 ± 1.0min; p = 0.007) and video duration was predictive of good quality (AUC, 0.672 ± 0.067; 95% CI: 0.541-0.802; p = 0.015). For good quality, the cut-off video duration was 7:42 minute. This cut-off value had a sensitivity of 67.9%, a specificity of 60.5%, and an odds ratio of 3.23 (95% CI: 1.19-8.79; p = 0.022) in predicting good quality. Videos uploaded from industrial sources and with a higher views/days online ratio had a higher objective component rating scale and total video quality score. In contrast, the likes/dislikes ratio was not predictive of video quality. Many videos showing the LF procedure have been uploaded to YouTube with varying degrees of quality. A process for filtering LF videos with high surgical and educational quality is feasible by evaluating the video duration, uploading source, and the views/days online ratio. However, alternative videos platforms aimed at professionals should also be considered for educational purposes. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Inner ear tissue preservation by rapid freezing: improving fixation by high-pressure freezing and hybrid methods.

PubMed

Bullen, A; Taylor, R R; Kachar, B; Moores, C; Fleck, R A; Forge, A

2014-09-01

In the preservation of tissues in as 'close to life' state as possible, rapid freeze fixation has many benefits over conventional chemical fixation. One technique by which rapid freeze-fixation can be achieved, high pressure freezing (HPF), has been shown to enable ice crystal artefact-free freezing and tissue preservation to greater depths (more than 40 μm) than other quick-freezing methods. Despite increasingly becoming routine in electron microscopy, the use of HPF for the fixation of inner ear tissue has been limited. Assessment of the quality of preservation showed routine HPF techniques were suitable for preparation of inner ear tissues in a variety of species. Good preservation throughout the depth of sensory epithelia was achievable. Comparison to chemically fixed tissue indicated that fresh frozen preparations exhibited overall superior structural preservation of cells. However, HPF fixation caused characteristic artefacts in stereocilia that suggested poor quality freezing of the actin bundles. The hybrid technique of pre-fixation and high pressure freezing was shown to produce cellular preservation throughout the tissue, similar to that seen in HPF alone. Pre-fixation HPF produced consistent high quality preservation of stereociliary actin bundles. Optimising the preparation of samples with minimal artefact formation allows analysis of the links between ultrastructure and function in inner ear tissues. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference on good laboratory practices in gynecologic cytology: background, rationale, and organization.

PubMed

Tworek, Joseph A; Henry, Michael R; Blond, Barbara; Jones, Bruce Allen

2013-02-01

Gynecologic cytopathology is a heavily regulated field, with Clinical Laboratory Improvement Amendments of 1988 mandating the collection of many quality metrics. There is a lack of consensus regarding methods to collect, monitor, and benchmark these data and how these data should be used in a quality assurance program. Furthermore, the introduction of human papilloma virus testing and proficiency testing has provided more data to monitor. To determine good laboratory practices in quality assurance of gynecologic cytopathology. Data were collected through a written survey consisting of 98 questions submitted to 1245 Clinical Laboratory Improvement Amendments-licensed or Department of Defense laboratories. There were 541 usable responses. Additional input was sought through a Web posting of results and questions on the College of American Pathologists Web site. Four senior authors who authored the survey and 28 cytopathologists and cytotechnologists were assigned to 5 working groups to analyze data and present statements on good laboratory practices in gynecologic cytopathology at the College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference. Ninety-eight attendees at the College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference discussed and voted on good laboratory practice statements to obtain consensus. This paper describes the rationale, background, process, and strengths and limitations of a series of papers that summarize good laboratory practice statements in quality assurance in gynecologic cytopathology.

The genetic control of milling yield, dough rheology and baking quality of wheat.

PubMed

Kuchel, H; Langridge, P; Mosionek, L; Williams, K; Jefferies, S P

2006-05-01

Improving the end-use quality of wheat is a key target for many breeding programmes. With the exception of the relationship between glutenin alleles and some dough rheological characters, knowledge concerning the genetic control of wheat quality traits is somewhat limited. A doubled haploid population produced from a cross between two Australian cultivars 'Trident' and 'Molineux' has been used to construct a linkage map based largely on microsatellite molecular makers. 'Molineux' is superior to 'Trident' for a number of milling, dough rheology and baking quality characteristics, although by international standards 'Trident' would still be regarded as possessing moderately good end-use quality. This population was therefore deemed useful for investigation of wheat end-use quality. A number of significant QTL identified for dough rheological traits mapped to HMW and LMW glutenin loci on chromosomes 1A and 1B. However, QTL associated with dough strength and loaf volume were also identified on chromosome 2A and a significant QTL associated with loaf volume and crumb quality was identified on chromosome 3A. A QTL for flour protein content and milling yield was identified on chromosome 6A and a QTL associated with flour colour reported previously on chromosome 7B was confirmed in this population. The detection of loci affecting dough strength, loaf volume and flour protein content may provide fresh opportunities for the application of marker-assisted selection to improve bread-making quality.

The Getting-Out-of-Bed (GoB) Scale: A Measure of Motivation and Life Outlook in Older Adults with Cancer

PubMed Central

Clough-Gorr, Kerri M.; Rakowski, William; Clark, Melissa; Silliman, Rebecca A.

2009-01-01

Objective To develop and evaluate the psychometric properties of a measure of motivation and life outlook (Getting-Out-of-Bed [GoB]). Design Secondary analysis of baseline and 6-month data from a longitudinal follow-up study of older breast cancer survivors. Participants Women (N=660) diagnosed with primary breast cancer stage I -IIIA disease, age ≥65-years, and permission to contact from an attending physician in four geographic regions in the USA (city-based Los Angeles, California; state-wide in Minnesota, North Carolina, and Rhode Island). Measurement Data were collected over 6-months of follow-up from consenting patients’ medical records and telephone interviews with patients. Data collected included the 4-item GoB, health related quality of life (HRQoL), breast cancer, socio-demographic and health-related characteristics. Results Factor analysis produced, as hypothesized, one principal component with eigen values of 2.74baseline and 2.916-months which explained 68.6%baseline and 72.7%6-months of total variance. In further psychometric analyses, GoB exhibited good construct validity (divergent: low non-statistically significant correlations with unrelated constructs; convergent: moderate statistically significant correlations with related constructs; discriminant: distinguished high HRQoL groups with a high level of significance), excellent internal reliability (Cronbach’s alpha 0.84baseline,0.876-months), and produced stable measurements over 6-months. Women with GoB scores ≥50 at baseline were more likely at 6-months to have good HRQoL, good self-perceived health, and report regular exercise, indicating good predictive ability. Conclusion GoB demonstrated overall good psychometric properties in this sample of older breast cancer survivors, suggestive of a promising tool for assessing motivation and life outlook in older adults. Nevertheless, because it was developed and initially evaluated in a select sample, using measures with similar but not exact content overlap further evaluation is needed before it can be recommended for widespread use. PMID:19813135

Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization

NASA Astrophysics Data System (ADS)

Basak, Amrita; Acharya, Ranadip; Das, Suman

2016-08-01

This paper focuses on additive manufacturing (AM) of single-crystal (SX) nickel-based superalloy CMSX-4 through scanning laser epitaxy (SLE). SLE, a powder bed fusion-based AM process was explored for the purpose of producing crack-free, dense deposits of CMSX-4 on top of similar chemistry investment-cast substrates. Optical microscopy and scanning electron microscopy (SEM) investigations revealed the presence of dendritic microstructures that consisted of fine γ' precipitates within the γ matrix in the deposit region. Computational fluid dynamics (CFD)-based process modeling, statistical design of experiments (DoE), and microstructural characterization techniques were combined to produce metallurgically bonded single-crystal deposits of more than 500 μm height in a single pass along the entire length of the substrate. A customized quantitative metallography based image analysis technique was employed for automatic extraction of various deposit quality metrics from the digital cross-sectional micrographs. The processing parameters were varied, and optimal processing windows were identified to obtain good quality deposits. The results reported here represent one of the few successes obtained in producing single-crystal epitaxial deposits through a powder bed fusion-based metal AM process and thus demonstrate the potential of SLE to repair and manufacture single-crystal hot section components of gas turbine systems from nickel-based superalloy powders.

Interaction of feel system and flight control system dynamics on lateral flying qualities

NASA Technical Reports Server (NTRS)

Bailey, R. E.; Knotts, L. H.

1990-01-01

An experimental investigation of the influence of lateral feel system characteristics on fighter aircraft roll flying qualities was conducted using the variable stability USAF NT-33. Forty-two evaluation flights were flown by three engineering test pilots. The investigation utilized the power approach, visual landing task and up-and-away tasks including formation, gun tracking, and computer-generated compensatory attitude tracking tasks displayed on the Head-Up Display. Experimental variations included the feel system frequency, force-deflection gradient, control system command type (force or position input command), aircraft roll mode time constant, control system prefilter frequency, and control system time delay. The primary data were task performance records and evaluation pilot comments and ratings using the Cooper-Harper scale. The data highlight the unique and powerful effect of the feel system of flying qualities. The data show that the feel system is not 'equivalent' in flying qualities influence to analogous control system elements. A lower limit of allowable feel system frequency appears warranted to ensure good lateral flying qualities. Flying qualities criteria should most properly treat the feel system dynamic influence separately from the control system, since the input and output of this dynamic element is apparent to the pilot and thus, does not produce a 'hidden' effect.

Resonance assignment of the NMR spectra of disordered proteins using a multi-objective non-dominated sorting genetic algorithm.

PubMed

Yang, Yu; Fritzsching, Keith J; Hong, Mei

2013-11-01

A multi-objective genetic algorithm is introduced to predict the assignment of protein solid-state NMR (SSNMR) spectra with partial resonance overlap and missing peaks due to broad linewidths, molecular motion, and low sensitivity. This non-dominated sorting genetic algorithm II (NSGA-II) aims to identify all possible assignments that are consistent with the spectra and to compare the relative merit of these assignments. Our approach is modeled after the recently introduced Monte-Carlo simulated-annealing (MC/SA) protocol, with the key difference that NSGA-II simultaneously optimizes multiple assignment objectives instead of searching for possible assignments based on a single composite score. The multiple objectives include maximizing the number of consistently assigned peaks between multiple spectra ("good connections"), maximizing the number of used peaks, minimizing the number of inconsistently assigned peaks between spectra ("bad connections"), and minimizing the number of assigned peaks that have no matching peaks in the other spectra ("edges"). Using six SSNMR protein chemical shift datasets with varying levels of imperfection that was introduced by peak deletion, random chemical shift changes, and manual peak picking of spectra with moderately broad linewidths, we show that the NSGA-II algorithm produces a large number of valid and good assignments rapidly. For high-quality chemical shift peak lists, NSGA-II and MC/SA perform similarly well. However, when the peak lists contain many missing peaks that are uncorrelated between different spectra and have chemical shift deviations between spectra, the modified NSGA-II produces a larger number of valid solutions than MC/SA, and is more effective at distinguishing good from mediocre assignments by avoiding the hazard of suboptimal weighting factors for the various objectives. These two advantages, namely diversity and better evaluation, lead to a higher probability of predicting the correct assignment for a larger number of residues. On the other hand, when there are multiple equally good assignments that are significantly different from each other, the modified NSGA-II is less efficient than MC/SA in finding all the solutions. This problem is solved by a combined NSGA-II/MC algorithm, which appears to have the advantages of both NSGA-II and MC/SA. This combination algorithm is robust for the three most difficult chemical shift datasets examined here and is expected to give the highest-quality de novo assignment of challenging protein NMR spectra.

Assessment of irrigation water quality. A proposal of a quality profile.

PubMed

Almeida, César; Quintar, Silvya; González, Patricia; Mallea, Miguel

2008-07-01

Water quality indices provide a simple and understandable tool for managers on the quality and possible uses for irrigation water, however an individual quality factor alone is not enough to evaluate the irrigation water quality because it could be restrictive and sometime it could give an unfavorable qualification. The aim of this paper was propose a quality profile of irrigation water using the preexisting water quality indices to be applied to arid and semi-arid regions. As a case studied, the water of the Del Molle River (Nogolí, San Luis, Argentina) was researched. Samples were collected during the period October 2005-May 2006. Conductivity, pH, total hardness, sulphate, nitrate, nitrite, alkalinity, chloride, sodium, potassium, TDS, DO and phosphate were analyzed. The irrigation water quality, according to Riverside Norm, belongs to C(2)-S(1) class, according to Wilcox Norm as excellent to good, according to Scott quality factor it is good and according to SAR < 10 and according to RCS it is recommendable. From the obtained data, it can be concluded that the water quality profile was good, so it is useful for normal irrigation agriculture.

76 FR 2123 - Agency Information Collection Activities; Announcement of Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

...; Current Good Manufacturing Practice Quality System Regulation AGENCY: Food and Drug Administration, HHS... information entitled ``Current Good Manufacturing Practice Quality System Regulation'' has been approved by...

Separate and Joint Associations of Shift Work and Sleep Quality with Lipids.

PubMed

Charles, Luenda E; Gu, Ja K; Tinney-Zara, Cathy A; Fekedulegn, Desta; Ma, Claudia C; Baughman, Penelope; Hartley, Tara A; Andrew, Michael E; Violanti, John M; Burchfiel, Cecil M

2016-06-01

Shift work and/or sleep quality may affect health. We investigated whether shift work and sleep quality, separately and jointly, were associated with abnormal levels of triglycerides, total cholesterol (TC), and low-and high-density lipoprotein cholesterol in 360 police officers (27.5% women). Triglycerides, TC, and high-density lipoprotein were analyzed on the Abbott Architect; low-density lipoprotein was calculated. Shift work was assessed using City of Buffalo payroll work history records. Sleep quality (good, ≤ 5; intermediate, 6-8; poor, ≥ 9) was assessed using the Pittsburgh Sleep Quality Index questionnaire. A shift work + sleep quality variable was created: day plus good sleep; day plus poor sleep; afternoon/night plus good; and poor sleep quality. Mean values of lipid biomarkers were compared across categories of the exposures using analysis of variance/analysis of covariance. Shift work was not significantly associated with lipids. However, as sleep quality worsened, mean levels of triglycerides and TC gradually increased but only among female officers (age- and race-adjusted p = 0.013 and 0.030, respectively). Age significantly modified the association between sleep quality and TC. Among officers ≥ 40 years old, those reporting poor sleep quality had a significantly higher mean level of TC (202.9 ± 3.7 mg/dL) compared with those reporting good sleep quality (190.6 ± 4.0 mg/dL) (gender- and race-adjusted p = 0.010). Female officers who worked the day shift and also reported good sleep quality had the lowest mean level of TC compared with women in the other three categories (p = 0.014). Sleep quality and its combined influence with shift work may play a role in the alteration of some lipid measures.

Use of olive leaf extract to reduce lipid oxidation of baked snacks.

PubMed

Difonzo, Graziana; Pasqualone, Antonella; Silletti, Roccangelo; Cosmai, Lucrezia; Summo, Carmine; Paradiso, Vito M; Caponio, Francesco

2018-06-01

Olive leaves are a waste of the olive oil processing industry and represent a good source of phenolic compounds. The aim of this work was to assess the influence of olive leaf extract (OLE) on lipid oxidation of baked snacks, like breadsticks, made with wheat flour, extra virgin olive oil (EVO), white wine, and salt. Two EVOs having different peroxide value and antioxidant profile (total phenol content, tocopherols, carotenoids, and antioxidant activity) were considered. The snacks were subjected to oven test or stored in the usual conditions of retailer shelves. The obtained data highlighted that EVO plays a key role both for the quality and for the shelf-life of baked snacks and the use of OLE is recommended especially when baked snacks are produced with low quality EVO which therefore does not have a good content of natural antioxidants. The OLE addition significantly reduced the forced oxidative degradation during oven test, as evidenced by a decrease of 27% in oxidation-related volatile compounds and of 42% in triacylglycerol oligopolymers compared to control snacks (CTR) without OLE. Moreover, OLE effectively acted also in normal storage conditions, improving sensory data, induction times, antioxidant activity, and volatile compounds compared to CTR (i.e. hexanal 165.49 vs 38.31 μg g -1 in OLE-added). The amount of oxidation-related volatile compounds showed an opposite trend with the quality level of oil used. Copyright © 2018 Elsevier Ltd. All rights reserved.

Building corporate character. Interview by Nan Stone.

PubMed

Hiatt, A

1992-01-01

Stride Rite is a good company by any definition: Keds, Sperry Top-Siders, and Stride Rite children's shoes are consumer favorites for their fit, quality, and comfort. Wall Street analysts praise the company's outstanding financial performance. Innovative programs such as the first corporate child-care center and public service scholarships support Stride Rite's reputation as one of the most responsible employers and corporate citizens in the United States. Behind Stride Rite's good performance are the building blocks of corporate character: a legacy of quality and service and a leader committed to keeping that legacy lively. When Stride Rite shipped its first children's shoes in 1919, they came with the company's commitment "to produce an honest quality product in an honest way and deliver it as promised." For Arnold Hiatt, that commitment has been the driving force behind the company's evolution from manufacturing into marketing and product development as well as the guiding principle in its relations with consumers, dealers, suppliers, and employees. But Stride Rite's corporate character is also a reflection of Hiatt himself. In his early 20s, Hiatt fled a management training program "designed to make carnivores" out of its new employees and bought Blue Star Shoes, a small manufacturing company that had gone into Chapter 11. Through experience and "stumbling around," he built Blue Star's sales to $5 million-and got a practical education in management, markets, and human nature that has proved equally useful in running Stride Rite.

Effect of cellulose nanocrystals (CNC) on rheological and mechanical properties and crystallization behavior of PLA/CNC nanocomposites.

PubMed

Kamal, Musa R; Khoshkava, Vahid

2015-06-05

In earlier work, we reported that spray freeze drying of cellulose nanocrystals (CNC) yields porous agglomerate structures. On the other hand, the conventional spray dried CNC (CNCSD) and the freeze dried CNC (CNCFD) produce compact solid structures with very low porosity. As it is rather difficult to obtain direct microscopic evidence of the quality of dispersion of CNC in polymer nanocomposites, it was shown that supporting evidence of the quality and influence of dispersion in a polypropylene (PP)/CNC nanocomposite could be obtained by studying the rheological behavior, mechanical properties and crystallization characteristics of PP/CNC nanocomposites. In an effort to produce a sustainable, fully biosourced, biodegradable nanocomposite, this manuscript presents the results of a study of the rheological, mechanical and crystallization behavior of PLA/CNCSFD nanocomposites obtained by melt processing. The results are analyzed to determine CNC network formation, rheological percolation threshold concentrations, mechanical properties in the rubbery and glassy states, and the effect of CNCSFD on crystalline nucleation and crystallization rates of PLA. These results suggest that the porosity and network structure of CNCSFD agglomerates contribute significantly to good dispersion of CNC in the PLA matrix. Copyright © 2015 Elsevier Ltd. All rights reserved.

Soursop (Annona muricata) vinegar production and its chemical compositions

NASA Astrophysics Data System (ADS)

Ho, Chin Wai; Lazim, Azwan Mat; Fazry, Shazrul; Zaki, Umi Kalsum Hj Hussain; Lim, Seng Joe

2016-11-01

Vinegar is a liquid product that undergoes double fermentations, which are alcoholic and acetous fermentation. Sugar source was converted to ethanol in alcoholic fermentation, meanwhile ethanol was oxidised to acetic acid during acetous fermentation. Soursop (Annona muricata) was the starting material in this study, as it is easily available in Malaysia. Its highly aromatic, juicy and distinctive flavours enables the production of high quality vinegar. The objective of this research is to produce good quality soursop vinegar as an innovative method to preserve and utilise the soursop fruit in Malaysia and to determine its chemical compositions. It was found that the sugar content reduces over time, and it is inversely proportional to the ethanol concentration, due to the production of ethanol from sugar. Acetic acid was also found to increase with increasing fermentation time. pH showed no significant difference (p>0.05) in the reduction of sugar and the production of ethanol. However, significantly higher (p<0.05) production of acetic acid was observed at pH 5.0 and 5.5, compared to that at pH 4.5. There were no significant differences (p > 0.05) in Vitamin C contents in all soursop vinegar samples produced using different treatments.

Microbiological quality and safety of cooking butter in Beni-Suef governorate-Egypt.

PubMed

Meshref, A M S

2010-06-01

Cooking butter is one of the most popular types of fat consumed in Egyptian houses. It is produced in villages by rural women that are usually using their traditional knowledge during manufacturing. To study the rate of contamination and hygienic quality of cooking butter A total of 60 random samples of cooking butter, were collected from different farmers' houses in different villages, Beni-Suef Governorate, Egypt. Cooking butter samples were examined for psychrotrophic bacteria, total coliforms, faecal coliforms and molds and yeasts counts. Additionally examination for the presence of pathogenic bacteria like E.coli, S.aureus and Ps.aeruginosa were also performed. The microbiological examination revealed that 100, 100, 36.7, 31.7, 31.7 and 23.3% of the examined samples were contaminated by psychrotrophic bacteria, molds and yeasts, coliforms, faecal coliforms, E.coli and S.aureus, respectively. None of the examined cooking butter samples contained Ps.aeruginosa. The means values of sodium chloride and titratable acidity were 0.57 ± 0.05 % and 0.20 ± 0.013%, respectively. The present study showed that cooking butter is produced under unhygienic condition and without good manufacturing practice. The Public health significance and suggestive control measures are discussed.

A Critical Analysis of the INQAAHE Guidelines of Good Practice for Higher Education Quality Assurance Agencies

ERIC Educational Resources Information Center

Blackmur, Douglas

2008-01-01

The International Network of Quality Assurance Agencies in Higher Education's Guidelines of Good Practice by higher education quality assurance agencies need substantial revision before they can be considered adequate by stakeholders in any national higher education system. Various revisions are proposed in this article. But the International…

The Importance and Use of Quality Literature in the Classroom.

ERIC Educational Resources Information Center

Carus, Marianne

The author argues that children learn best when they are exposed to literature of good quality, such as that chosen for her magazine, "Cricket." With literature as the focus, the good teacher can develop a fully correlated language arts program. Using quality material in a lively and entertaining manner, "Cricket" lays…

Good Job, Good Life? Working Conditions and Quality of Life in Europe

ERIC Educational Resources Information Center

Drobnic, Sonja; Beham, Barbara; Prag, Patrick

2010-01-01

Cross-national comparisons generally show large differences in life satisfaction of individuals within and between European countries. This paper addresses the question of whether and how job quality and working conditions contribute to the quality of life of employed populations in nine strategically selected EU countries: Finland, Sweden, the…

The Cervical Dystonia Impact Profile (CDIP-58): Can a Rasch developed patient reported outcome measure satisfy traditional psychometric criteria?

PubMed Central

Cano, Stefan J; Warner, Thomas T; Thompson, Alan J; Bhatia, Kailash P; Fitzpatrick, Ray; Hobart, Jeremy C

2008-01-01

Background The United States Food and Drug Administration (FDA) are currently producing guidelines for the scientific adequacy of patient reported outcome measures (PROMs) in clinical trials, which will have implications for the selection of scales used in future clinical trials. In this study, we examine how the Cervical Dystonia Impact Profile (CDIP-58), a rigorous Rasch measurement developed neurologic PROM, stands up to traditional psychometric criteria for three reasons: 1) provide traditional psychometric evidence for the CDIP-58 in line with proposed FDA guidelines; 2) enable researchers and clinicians to compare it with existing dystonia PROMs; and 3) help researchers and clinicians bridge the knowledge gap between old and new methods of reliability and validity testing. Methods We evaluated traditional psychometric properties of data quality, scaling assumptions, targeting, reliability and validity in a group of 391 people with CD. The main outcome measures used were the CDIP-58, Medical Outcome Study Short Form-36, the 28-item General Health Questionnaire, and Hospital and Anxiety and Depression Scale. Results A total of 391 people returned completed questionnaires (corrected response rate 87%). Analyses showed: 1) data quality was high (low missing data ≤ 4%, subscale scores could be computed for > 96% of the sample); 2) item groupings passed tests for scaling assumptions; 3) good targeting (except for the Sleep subscale, ceiling effect = 27%); 4) good reliability (Cronbach's alpha ≥ 0.92, test-retest intraclass correlations ≥ 0.83); and 5) validity was supported. Conclusion This study has shown that new psychometric methods can produce a PROM that stands up to traditional criteria and supports the clinical advantages of Rasch analysis. PMID:18684327

The cervical dystonia impact profile (CDIP-58): can a Rasch developed patient reported outcome measure satisfy traditional psychometric criteria?

PubMed

Cano, Stefan J; Warner, Thomas T; Thompson, Alan J; Bhatia, Kailash P; Fitzpatrick, Ray; Hobart, Jeremy C

2008-08-06

The United States Food and Drug Administration (FDA) are currently producing guidelines for the scientific adequacy of patient reported outcome measures (PROMs) in clinical trials, which will have implications for the selection of scales used in future clinical trials. In this study, we examine how the Cervical Dystonia Impact Profile (CDIP-58), a rigorous Rasch measurement developed neurologic PROM, stands up to traditional psychometric criteria for three reasons: 1) provide traditional psychometric evidence for the CDIP-58 in line with proposed FDA guidelines; 2) enable researchers and clinicians to compare it with existing dystonia PROMs; and 3) help researchers and clinicians bridge the knowledge gap between old and new methods of reliability and validity testing. We evaluated traditional psychometric properties of data quality, scaling assumptions, targeting, reliability and validity in a group of 391 people with CD. The main outcome measures used were the CDIP-58, Medical Outcome Study Short Form-36, the 28-item General Health Questionnaire, and Hospital and Anxiety and Depression Scale. A total of 391 people returned completed questionnaires (corrected response rate 87%). Analyses showed: 1) data quality was high (low missing data < or = 4%, subscale scores could be computed for > 96% of the sample); 2) item groupings passed tests for scaling assumptions; 3) good targeting (except for the Sleep subscale, ceiling effect = 27%); 4) good reliability (Cronbach's alpha > or = 0.92, test-retest intraclass correlations > or = 0.83); and 5) validity was supported. This study has shown that new psychometric methods can produce a PROM that stands up to traditional criteria and supports the clinical advantages of Rasch analysis.

Comparison of obese adults with poor versus good sleep quality during a functional neuroimaging delay discounting task: A pilot study.

PubMed

Martin, Laura E; Pollack, Lauren; McCune, Ashley; Schulte, Erica; Savage, Cary R; Lundgren, Jennifer D

2015-10-30

This study aimed to determine if obese adults with poor versus good sleep quality demonstrate reduced self-regulatory capacity and different patterns of neural activation when making impulsive monetary choices. Six obese, good quality sleepers (M age=44.7 years, M BMI=38.1 kg/m(2)) were compared to 13 obese, poor quality sleepers (M age=42.6, M BMI=39.2 kg/m(2)) on sleep and eating behavior and brain activation in prefrontal and insular regions while engaging in a delay discounting task during functional magnetic resonance imaging (fMRI). Poor quality sleepers demonstrated significantly lower brain activation in the right inferior frontal gyrus, right middle frontal gyrus, and bilateral insula when making immediate and smaller (impulsive) monetary choices compared to the baseline condition. Behaviorally, poor compared to good quality sleepers reported higher scores in the night eating questionnaire. Obese adults with poor sleep quality demonstrate decreased brain activation in multiple regions that regulate cognitive control and interceptive awareness, possibly reducing self-regulatory capacity when making immediately gratifying decisions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Intracarotid Cancer Cell Injection to Produce Mouse Models of Brain Metastasis.

PubMed

Zhang, Chenyu; Lowery, Frank J; Yu, Dihua

2017-02-08

Metastasis, the spread and growth of malignant cells at secondary sites within a patient's body, accounts for > 90% of cancer-related mortality. Recently, impressive advances in novel therapies have dramatically prolonged survival and improved quality of life for many cancer patients. Sadly, incidence of brain metastatic recurrences is fast rising, and all current therapies are merely palliative. Hence, good experimental animal models are urgently needed to facilitate in-depth studies of the disease biology and to assess novel therapeutic regimens for preclinical evaluation. However, the standard in vivo metastasis assay via tail vein injection of cancer cells produces predominantly lung metastatic lesions; animals usually succumb to the lung tumor burden before any meaningful outgrowth of brain metastasis. Intracardiac injection of tumor cells produces metastatic lesions to multiple organ sites including the brain; however, the variability of tumor growth produced with this model is large, dampening its utility in evaluating therapeutic efficacy. To generate reliable and consistent animal models for brain metastasis study, here we describe a procedure for producing experimental brain metastasis in the house mouse (Mus musculus) via intracarotid injection of tumor cells. This approach allows one to produce large number of brain metastasis-bearing mice with similar growth and mortality characteristics, thus facilitating research efforts to study basic biological mechanisms and to assess novel therapeutic agents.

Catalytic pyrolysis of olive mill wastewater sludge

NASA Astrophysics Data System (ADS)

Abdellaoui, Hamza

From 2008 to 2013, an average of 2,821.4 kilotons/year of olive oil were produced around the world. The waste product of the olive mill industry consists of solid residue (pomace) and wastewater (OMW). Annually, around 30 million m3 of OMW are produced in the Mediterranean area, 700,000 m3 year?1 in Tunisia alone. OMW is an aqueous effluent characterized by an offensive smell and high organic matter content, including high molecular weight phenolic compounds and long-chain fatty acids. These compounds are highly toxic to micro-organisms and plants, which makes the OMW a serious threat to the environment if not managed properly. The OMW is disposed of in open air evaporation ponds. After evaporation of most of the water, OMWS is left in the bottom of the ponds. In this thesis, the effort has been made to evaluate the catalytic pyrolysis process as a technology to valorize the OMWS. The first section of this research showed that 41.12 wt. % of the OMWS is mostly lipids, which are a good source of energy. The second section proved that catalytic pyrolysis of the OMWS over red mud and HZSM-5 can produce green diesel, and 450 °C is the optimal reaction temperature to maximize the organic yields. The last section revealed that the HSF was behind the good fuel-like properties of the OMWS catalytic oils, whereas the SR hindered the bio-oil yields and quality.

Oral and Written Expression in Children With Reading Comprehension Difficulties.

PubMed

Carretti, Barbara; Motta, Eleonora; Re, Anna Maria

2016-01-01

Several studies have highlighted that children with reading comprehension difficulties also have problems in tasks that involve telling a story, in writing or verbally. The main differences identified regard poor comprehenders' lower level of coherence in their productions by comparison with good comprehenders. Only one study has compared poor and good comprehenders' performance in both modalities (oral and written), however, to see whether these modalities differently influence poor comprehenders' performance. We qualitatively and quantitatively compared the performance of good and poor comprehenders in oral and written narrative tasks with the aim of shedding light on this issue. Regression analyses were also used to explore the role of working memory and vocabulary in explaining individual differences. Our results showed that the two groups produced narratives of comparable length, with similar percentages of spelling mistakes, whereas they differed in terms of the quality of their narratives, regardless of the modality. These differences were qualified by analyzing the children's use of connective devices, and poor comprehenders were found to use a higher proportion of additive devices than good comprehenders. Regression analyses showed that working memory (particularly the intrusion errors measure) explained a modest part of the qualitative differences in narrative production. Implications for our theoretical understanding of poor comprehenders' profiles and education are discussed. © Hammill Institute on Disabilities 2014.

How good is Google? The quality of otolaryngology information on the internet.

PubMed

Pusz, Max D; Brietzke, Scott E

2012-09-01

To assess the quality of the information a patient (parent) may encounter using a Google search for typical otolaryngology ailments. Cross-sectional study. Tertiary care center. A Google keyword search was performed for 10 common otolaryngology problems including ear infection, hearing loss, tonsillitis, and so on. The top 10 search results for each were critically examined using the 16-item (1-5 scale) standardized DISCERN instrument. The DISCERN instrument was developed to assess the quality and comprehensiveness of patient treatment choice literature. A total of 100 Web sites were assessed. Of these, 19 (19%) were primarily advertisements for products and were excluded from DISCERN scoring. Searches for more typically chronic otolaryngic problems (eg, tinnitus, sleep apnea, etc) resulted in more biased, advertisement-type results than those for typically acute problems (eg, ear infection, sinus infection, P = .03). The search for "sleep apnea treatment" produced the highest scoring results (mean overall DISCERN score = 3.49, range = 1.81-4.56), and the search for "hoarseness treatment" produced the lowest scores (mean = 2.49, range = 1.56-3.56). Results from major comprehensive Web sites (WebMD, EMedicinehealth.com, Wikipedia, etc.) scored higher than other Web sites (mean DISCERN score = 3.46 vs 2.48, P < .001). There is marked variability in the quality of Web site information for the treatment of common otolaryngologic problems. Searches on more chronic problems resulted in a higher proportion of biased advertisement Web sites. Larger, comprehensive Web sites generally provided better information but were less than perfect in presenting complete information on treatment options.

Translation, adaptation and validation of a Portuguese version of the Moorehead-Ardelt Quality of Life Questionnaire II.

PubMed

Maciel, João; Infante, Paulo; Ribeiro, Susana; Ferreira, André; Silva, Artur C; Caravana, Jorge; Carvalho, Manuel G

2014-11-01

The prevalence of obesity has increased worldwide. An assessment of the impact of obesity on health-related quality of life (HRQoL) requires specific instruments. The Moorehead-Ardelt Quality of Life Questionnaire II (MA-II) is a widely used instrument to assess HRQoL in morbidly obese patients. The objective of this study was to translate and validate a Portuguese version of the MA-II.The study included forward and backward translations of the original MA-II. The reliability of the Portuguese MA-II was estimated using the internal consistency and test-retest methods. For validation purposes, the Spearman's rank correlation coefficient was used to evaluate the correlation between the Portuguese MA-II and the Portuguese versions of two other questionnaires, the 36-item Short Form Health Survey (SF-36) and the Impact of Weight on Quality of Life-Lite (IWQOL-Lite).One hundred and fifty morbidly obese patients were randomly assigned to test the reliability and validity of the Portuguese MA-II. Good internal consistency was demonstrated by a Cronbach's alpha coefficient of 0.80, and a very good agreement in terms of test-retest reliability was recorded, with an overall intraclass correlation coefficient (ICC) of 0.88. The total sums of MA-II scores and each item of MA-II were significantly correlated with all domains of SF-36 and IWQOL-Lite. A statistically significant negative correlation was found between the MA-II total score and BMI. Moreover, age, gender and surgical status were independent predictors of MA-II total score.A reliable and valid Portuguese version of the MA-II was produced, thus enabling the routine use of MA-II in the morbidly obese Portuguese population.

En face optical coherence tomography angiography for corneal neovascularisation.

PubMed

Ang, Marcus; Cai, Yijun; Shahipasand, Shahab; Sim, Dawn A; Keane, Pearse A; Sng, Chelvin C A; Egan, Catherine A; Tufail, Adnan; Wilkins, Mark R

2016-05-01

Recently, there has been an increasing clinical need for objective evaluation of corneal neovascularisation, a condition which cause significant ocular morbidity. We describe the use of a rapid, non-invasive 'en face' optical coherence tomography angiography (OCTA) system for the assessment of corneal neovascularisation. Consecutive patients with abnormal corneal neovascularisation were scanned using a commercially available AngioVue OCTA system (Optovue, Fremont, California, USA) with the split-spectrum amplitude decorrelation angiography algorithm, using an anterior segment lens adapter. Each subject had four scans in each eye by a trained operator and two independent masked assessors analysed all images. Main outcome measures were scan quality (signal strength, image quality), area of neovascularisation and repeatability of corneal vascular grade. We performed OCTA in 20 patients (11 men, 9 women, mean age 49.27±17.23 years) with abnormal corneal neovascularisation. The mean area of corneal neovascularisation was 0.57±0.30 mm(2) with a mean neovascularisation grade of 3.5±0.2 in the OCTA scans. We found the OCTA to produce good quality images of the corneal vessels (signal strength: 36.95±13.97; image quality score 2.72±1.07) with good repeatability for assessing neovascularisation grade (κ=0.84). In this preliminary clinical study, we describe a method for acquiring angiography images with 'en face' views, using an OCTA system adapted for the evaluation of corneal neovascularisation. Further studies are required to compare the scans to other invasive angiography techniques for the quantitative evaluation of abnormal corneal vessels. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Antimüllerian hormone as a predictor of good-quality supernumerary blastocyst cryopreservation among women with levels <1 ng/mL versus 1-4 ng/mL.

PubMed

Kavoussi, Shahryar K; Odenwald, Kate C; Boehnlein, Lynn M; Summers-Colquitt, Roxanne B; Pool, Thomas B; Swain, Jason E; Jones, Jeffrey M; Lindstrom, Mary J; Lebovic, Dan I

2015-09-01

To determine whether antimüllerian hormone (AMH) levels predict the availability of good-quality supernumerary blastocysts for cryopreservation. Retrospective study. Two fertility centers. First fresh IVF cycles (n = 247) grouped as follows: 40 women <35 year old with AMH <1 ng/mL and 77 women with AMH 1-4 ng/mL; 62 women ≥35 year old with AMH <1 ng/mL, and 68 women with AMH 1-4 ng/mL. AMH level measured before IVF with ovarian stimulation protocols based on patient age and AMH level, including short gonadotropin-releasing hormone (GnRH) agonist, GnRH antagonist, or GnRH agonist microdose flare; supernumerary good-quality blastocysts cryopreserved on days 5 or 6 after retrieval. Supernumerary good-quality blastocysts for cryopreservation in relation to AMH levels. Among women <35 years of age, there was a statistically significant difference in the number of patients with supernumerary good-quality blastocysts for cryopreservation between the groups with AMH <1 ng/mL and AMH 1-4 ng/mL (30.0% vs. 58.4%) when adjusted for age. Among women ≥35 years of age, there was a statistically significant difference in the number of patients with supernumerary good-quality blastocyst cryopreservation between groups with AMH <1 ng/mL and AMH 1-4 ng/mL (16.1% vs. 42.6%), when adjusted for age. Low AMH levels are associated with a statistically significantly lower likelihood of blastocysts for cryopreservation as compared with higher AMH levels. This effect was seen among women both <35 and ≥35 years of age. Patient counseling should include realistic expectations for the probability of good-quality supernumerary blastocysts available for cryopreservation. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

19 CFR 10.411 - Certification of origin or other information.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., address, telephone and e-mail address of the importer of record of the good (if known); (ii) The legal name, address, telephone and e-mail address of the exporter of the good (if different from the producer); (iii) The legal name, address, telephone and e-mail address of the producer of the good (if known); (iv...

Recovery technologies for building materials

NASA Astrophysics Data System (ADS)

Karu, Veiko; Nurme, Martin; Valgma, Ingo

2015-04-01

Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

Mexican unpasteurised fresh cheeses are contaminated with Salmonella spp., non-O157 Shiga toxin producing Escherichia coli and potential uropathogenic E. coli strains: A public health risk.

PubMed

Guzman-Hernandez, Rosa; Contreras-Rodriguez, Araceli; Hernandez-Velez, Rosa; Perez-Martinez, Iza; Lopez-Merino, Ahide; Zaidi, Mussaret B; Estrada-Garcia, Teresa

2016-11-21

Fresh cheeses are a main garnish of Mexican food. Consumption of artisanal fresh cheeses is very common and most of them are made from unpasteurised cow milk. A total of 52 fresh unpasteurised cheeses of five different types were purchased from a variety of suppliers from Tabasco, Mexico. Using the most probable number method, 67% and 63% of samples were positive for faecal coliforms and E. coli, respectively; revealing their low microbiological quality. General hygienic conditions and practices of traditional cheese manufacturers were poor; most establishments had unclean cement floors, all lacked windows and doors screens, and none of the food-handlers wore aprons, surgical masks or bouffant caps. After analysing all E. coli isolates (121 strains) for the presence of 26 virulence genes, results showed that 9 (17%) samples were contaminated with diarrheagenic E. coli strains, 8 harboured non-O157 Shiga toxin producing E. coli (STEC), and one sample contained both STEC and diffusely adherent E. coli strains. All STEC strains carried the stx1 gene. Potential uropathogenic E. coli (UPEC) strains were isolated from 15 (29%) samples; the most frequent gene combination was fimA-agn43. Two samples were contaminated with Salmonella. The results demonstrated that unpasteurised fresh cheeses produced in Tabasco are of poor microbiological quality and may frequently harbour foodborne pathogens. Food safety authorities in Mexico need to conduct more rigorous surveillance of fresh cheeses. Furthermore, simple and inexpensive measures as establishing programs emphasizing good hand milking practices and hygienic manufacturing procedures may have a major effect on improving the microbiological quality of these food items. Copyright © 2016 Elsevier B.V. All rights reserved.

Bt Jute Expressing Fused δ-Endotoxin Cry1Ab/Ac for Resistance to Lepidopteran Pests

PubMed Central

Majumder, Shuvobrata; Sarkar, Chirabrata; Saha, Prosanta; Gotyal, Bheemanna S.; Satpathy, Subrata; Datta, Karabi; Datta, Swapan K.

2018-01-01

Jute (Corchorus sp.) is naturally occurring, biodegradable, lignocellulosic-long, silky, golden shiny fiber producing plant that has great demands globally. Paper and textile industries are interested in jute because of the easy availability, non-toxicity and high yield of cellulosic biomass produced per acre in cultivation. Jute is the major and most industrially used bast fiber-producing crop in the world and it needs protection from insect pest infestation that decreases its yield and quality. Single locus integration of the synthetically fused cry1Ab/Ac gene of Bacillus thuringiensis (Bt) in Corchorus capsularis (JRC 321) by Agrobacterium tumefaciens-mediated shoot tip transformation provided 5 potent Bt jute lines BT1, BT2, BT4, BT7 and BT8. These lines consistently expressed the Cry1Ab/Ac endotoxin ranging from 0.16 to 0.35 ng/mg of leaf, in the following generations (analyzed upto T4). The effect of Cry1Ab/Ac endotoxin was studied against 3 major Lepidopteran pests of jute- semilooper (Anomis sabulifera Guenee), hairy caterpillar (Spilarctia obliqua Walker) and indigo caterpillar (Spodoptera exigua Hubner) by detached leaf and whole plant insect bioassay on greenhouse-grown transgenic plants. Results confirm that larvae feeding on transgenic plants had lower food consumption, body size, body weight and dry weight of excreta compared to non-transgenic controls. Insect mortality range among transgenic feeders was 66–100% for semilooper and hairy caterpillar and 87.50% for indigo caterpillar. Apart from insect resistance, the transgenic plants were at par with control plants in terms of agronomic parameters and fiber quality. Hence, these Bt jutes in the field would survive Lepidopteran pest infestation, minimize harmful pesticide usage and yield good quality fiber. PMID:29354143

Effect of incubation time of sago (metroxylon sago) waste by local microorganism ″ginta″ on ph, crude protein, and crude fiber content

NASA Astrophysics Data System (ADS)

Ginting, Nurzainah; Pase, E.

2018-03-01

This study aims to examine the effect of incubation times of sago waste by local microorganism (MOL) “Ginta” to the crude protein and crude fiber content in relation to finding a cheap and good quality ruminants feed alternative. Incubation times were 0 hours to 144 hours. The data obtained were analyzed using Completely Randomize Design consisting of seven treatments and three replications. The result showed that the duration of incubation of sago waste by local microorganism (MOL) “Ginta” caused pH reduction, improved crude protein and crude fiber content. pH reduction was from 7.03 at 0 hour to 4.05 at 144 hours incubation. The highest increased in crude protein was H6U3 (5.58%) : 144 hours incubation and the lowest was H0U2 (3.22%) : 0 hour incubation while the highest crude fiber was H0U1 (19.99%) : 0 hour incubation and the lowest was H6U3 (18.23%) : 144 hours incubation. It can be concluded that incubation of sago waste triggered lower pH, higher crude protein and lower crude fiber than uninoculated. A recommendation could be given on using MOL ‘Ginta” in order to produce a cheap and good quality ruminans feed alternative.

Parametric study of waste chicken fat catalytic chemical vapour deposition for controlled synthesis of vertically aligned carbon nanotubes

NASA Astrophysics Data System (ADS)

Suriani, A. B.; Dalila, A. R.; Mohamed, A.; Rosmi, M. S.; Mamat, M. H.; Malek, M. F.; Ahmad, M. K.; Hashim, N.; Isa, I. M.; Soga, T.; Tanemura, M.

2016-12-01

High-quality vertically aligned carbon nanotubes (VACNTs) were synthesised using ferrocene-chicken oil mixture utilising a thermal chemical vapour deposition (TCVD) method. Reaction parameters including vaporisation temperature, catalyst concentration and synthesis time were examined for the first time to investigate their influence on the growth of VACNTs. Analysis via field emission scanning electron microscopy and micro-Raman spectroscopy revealed that the growth rate, diameter and crystallinity of VACNTs depend on the varied synthesis parameters. Vaporisation temperature of 570°C, catalyst concentration of 5.33 wt% and synthesis time of 60 min were considered as optimum parameters for the production of VACNTs from waste chicken fat. These parameters are able to produce VACNTs with small diameters in the range of 15-30 nm and good quality (ID/IG 0.39 and purity 76%) which were comparable to those synthesised using conventional carbon precursor. The low turn on and threshold fields of VACNTs synthesised using optimum parameters indicated that the VACNTs synthesised using waste chicken fat are good candidate for field electron emitter. The result of this study therefore can be used to optimise the growth and production of VACNTs from waste chicken fat in a large scale for field emission application.

Investigation of improving MEMS-type VOA reliability

NASA Astrophysics Data System (ADS)

Hong, Seok K.; Lee, Yeong G.; Park, Moo Y.

2003-12-01

MEMS technologies have been applied to a lot of areas, such as optical communications, Gyroscopes and Bio-medical components and so on. In terms of the applications in the optical communication field, MEMS technologies are essential, especially, in multi dimensional optical switches and Variable Optical Attenuators(VOAs). This paper describes the process for the development of MEMS type VOAs with good optical performance and improved reliability. Generally, MEMS VOAs have been fabricated by silicon micro-machining process, precise fibre alignment and sophisticated packaging process. Because, it is composed of many structures with various materials, it is difficult to make devices reliable. We have developed MEMS type VOSs with many failure mode considerations (FMEA: Failure Mode Effect Analysis) in the initial design step, predicted critical failure factors and revised the design, and confirmed the reliability by preliminary test. These predicted failure factors were moisture, bonding strength of the wire, which wired between the MEMS chip and TO-CAN and instability of supplied signals. Statistical quality control tools (ANOVA, T-test and so on) were used to control these potential failure factors and produce optimum manufacturing conditions. To sum up, we have successfully developed reliable MEMS type VOAs with good optical performances by controlling potential failure factors and using statistical quality control tools. As a result, developed VOAs passed international reliability standards (Telcodia GR-1221-CORE).

Investigation of improving MEMS-type VOA reliability

NASA Astrophysics Data System (ADS)

Hong, Seok K.; Lee, Yeong G.; Park, Moo Y.

2004-01-01

MEMS technologies have been applied to a lot of areas, such as optical communications, Gyroscopes and Bio-medical components and so on. In terms of the applications in the optical communication field, MEMS technologies are essential, especially, in multi dimensional optical switches and Variable Optical Attenuators(VOAs). This paper describes the process for the development of MEMS type VOAs with good optical performance and improved reliability. Generally, MEMS VOAs have been fabricated by silicon micro-machining process, precise fibre alignment and sophisticated packaging process. Because, it is composed of many structures with various materials, it is difficult to make devices reliable. We have developed MEMS type VOSs with many failure mode considerations (FMEA: Failure Mode Effect Analysis) in the initial design step, predicted critical failure factors and revised the design, and confirmed the reliability by preliminary test. These predicted failure factors were moisture, bonding strength of the wire, which wired between the MEMS chip and TO-CAN and instability of supplied signals. Statistical quality control tools (ANOVA, T-test and so on) were used to control these potential failure factors and produce optimum manufacturing conditions. To sum up, we have successfully developed reliable MEMS type VOAs with good optical performances by controlling potential failure factors and using statistical quality control tools. As a result, developed VOAs passed international reliability standards (Telcodia GR-1221-CORE).

Finding Quality in "Being Good Enough" Conversations

ERIC Educational Resources Information Center

Gibbs, Paul

2011-01-01

This article considers how a contribution based on Rorty's philosophy can help in the understanding of quality and its assurance in higher education. The suggestion is that if quality has an edifying purpose, then it should be seen as an ongoing process and might be aptly judged as being just "good enough". This position is argued for it…

How Good Is Our College? First Edition

ERIC Educational Resources Information Center

Education Scotland, 2016

2016-01-01

The new quality framework, "How good is our college?" is a tool to support and enable colleges to evaluate the quality of provision and services alongside reporting on progress in relation to outcome agreements. It is designed to be used by all college staff. Colleges will evaluate the quality of their provision and services using the 12…

Noninvasive pH monitoring of platelet concentrates: a large field test.

PubMed

Gkoumassi, Effimia; Klein-Bosgoed, Christa; Dijkstra-Tiekstra, Margriet J; de Korte, Dirk; de Wildt-Eggen, Janny

2013-10-01

Developing new quality control methods for platelet concentrates (PCs) can contribute to increasing transfusion safety and efficiency. The aim of this study was to investigate in a large field test the quality of expired PCs and whether 100% noninvasive pH monitoring can be used to predict PC quality. The pH of 13,693 PCs produced for transfusion was monitored daily using Blood Storage, Inc.'s pH sterile, automated fluoroscopic evaluation technology. Upon indication of compromised quality or expiration, PCs were returned and in vitro tests were performed. A total of 998 PCs were returned, of which 962 outdated, 26 had a positive BacT/ALERT reaction, seven had aggregates, one was without swirl, one had low pH, and one had high pH. BacT/ALERT was faster in identifying bacterial contamination than pH measurements. The pH at the end of the storage period was significantly lower than at the beginning. In vitro tests indicated that while the PC quality was acceptable upon expiration, it rapidly declined after expiration. In this setting where the vast majority of PCs were of good quality and within acceptable pH limits, daily, noninvasive routine pH measurement has limited added value in identifying quality-compromised PCs. © 2013 Sanquin Research. Transfusion © 2013 American Association of Blood Banks.

Make or buy analysis model based on tolerance allocation to minimize manufacturing cost and fuzzy quality loss

NASA Astrophysics Data System (ADS)

Rosyidi, C. N.; Puspitoingrum, W.; Jauhari, W. A.; Suhardi, B.; Hamada, K.

2016-02-01

The specification of tolerances has a significant impact on the quality of product and final production cost. The company should carefully pay attention to the component or product tolerance so they can produce a good quality product at the lowest cost. Tolerance allocation has been widely used to solve problem in selecting particular process or supplier. But before merely getting into the selection process, the company must first make a plan to analyse whether the component must be made in house (make), to be purchased from a supplier (buy), or used the combination of both. This paper discusses an optimization model of process and supplier selection in order to minimize the manufacturing costs and the fuzzy quality loss. This model can also be used to determine the allocation of components to the selected processes or suppliers. Tolerance, process capability and production capacity are three important constraints that affect the decision. Fuzzy quality loss function is used in this paper to describe the semantic of the quality, in which the product quality level is divided into several grades. The implementation of the proposed model has been demonstrated by solving a numerical example problem that used a simple assembly product which consists of three components. The metaheuristic approach were implemented to OptQuest software from Oracle Crystal Ball in order to obtain the optimal solution of the numerical example.

Knowledge Gained from Good Agricultural Practices Courses for Iowa Growers

ERIC Educational Resources Information Center

Shaw, Angela; Strohbehn, Catherine; Naeve, Linda; Domoto, Paul; Wilson, Lester

2015-01-01

Good Agricultural Practices (GAP) educational courses provide produce growers with the fundamental information for producing and processing safe produce. To determine the effectiveness of the current 7-hour GAP course provided in Iowa, growers were surveyed before and 7-14 days after the course to determine changes in knowledge and opinions.…

Programmable 2-D Addressable Cryogenic Aperture Masks

NASA Technical Reports Server (NTRS)

Kutyrev, A. S.; Moseley, S. H.; Jhabvala, M.; Li, M.; Schwinger, D. S.; Silverberg, R. F.; Wesenberg, R. P.

2004-01-01

We are developing a two-dimensional array of square microshutters (programmable aperture mask) for a multi-object spectrometer for the James Webb Space Telescope (JWST). This device will provide random access selection of the areas in the field to be studied. The device is in essence a close packed array of square slits, each of which can be opened independently to select areas of the sky for detailed study.The device is produced using a 100-micron thick silicon wafer as a substrate with 0.5-micron thick silicon nitride shutters on top of it. Silicon nitride has been selected as the blade and flexure material because its stiffness allows thinner and lighter structures than single crystal Si, the chief alternative, and because of its ease of manufacture. The 100 micron silicon wafer is backetched in a high aspect ratio Deep Reactive Ion Etching (Deep RIE) to leave only a support grid for the shutters and the address electronics. The shutter actuation is done magnetically whereas addressing is electrostatic. 128x128 format microshutter arrays have been produced. Their operation has been demostarted on 32x32 subarrays. Good reliability of the fabrication process and good quality of the microshutters has been achieved. The mechanical behavior and optical performance of the fabricated arrays at cryogenic temperature are being studied.

Effect of shortening replacement with oleogels on the rheological and tomographic characteristics of aerated baked goods.

PubMed

Lim, Jeongtaek; Jeong, Sungmin; Lee, JaeHwan; Park, Sungkwon; Lee, Jonggil; Lee, Suyong

2017-08-01

A great deal of effort has been made to reduce the use of shortening owing to the high level of saturated fats as well as the presence of trans fats. Grape seed oil high in unsaturated fats was structured with candelilla wax to form solid-like oleogels that were utilized as a shortening replacer in aerated baked goods, specifically muffins. Muffin batters with greater amounts of oleogels exhibited lower viscosity, greater shear-thinning behavior and less elastic nature. The shortening replacement with oleogels significantly increased the specific gravity of the batters, consequently affecting the muffin volume after baking. X-ray tomography indicated a lower fragmentation index (i.e. a more connected solid structure) in the oleogel-incorporated muffins, which was correlated with more enclosed and isolated air cells. A stress relaxation test showed that the shortening replacement with oleogels produced muffins with a firmer and springier texture. Based on fatty acid compositions, the ratio of saturated to unsaturated fatty acids was significantly reduced from 2.81 to 0.41. Use of the oleogels as a shortening replacer at a ratio of 1:3 by weight was effective in producing muffins with comparable quality attributes to the control with shortening. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

First refraction contrast imaging via Laser-Compton Scattering X-ray at KEK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sakaue, Kazuyuki; Aoki, Tatsuro; Washio, Masakazu

2012-07-31

Laser-Compton Scattering (LCS) is one of the most feasible techniques for high quality, high brightness, and compact X-ray source. High energy electron beam produced by accelerators scatters off the laser photon at a small spot. As a laser target, we have been developing a pulsedlaser storage cavity for increasing an X-ray flux. The X-ray flux was still inadequate that was 2.1 Multiplication-Sign 10{sup 5}/sec, however, we performed first refraction contrast imaging in order to evaluate the quality of LCS X-ray. Edge enhanced contrast imaging was achieved by changing the distance from sample to detector. The edge enhancement indicates that themore » LCS X-ray has small source size, i.e. high brightness. We believe that the result has demonstrated good feasibility of linac-based high brightness X-ray sources via laser-electron Compton scatterings.« less

Crystallization of PTP Domains.

PubMed

Levy, Colin; Adams, James; Tabernero, Lydia

2016-01-01

Protein crystallography is the most powerful method to obtain atomic resolution information on the three-dimensional structure of proteins. An essential step towards determining the crystallographic structure of a protein is to produce good quality crystals from a concentrated sample of purified protein. These crystals are then used to obtain X-ray diffraction data necessary to determine the 3D structure by direct phasing or molecular replacement if the model of a homologous protein is available. Here, we describe the main approaches and techniques to obtain suitable crystals for X-ray diffraction. We include tools and guidance on how to evaluate and design the protein construct, how to prepare Se-methionine derivatized protein, how to assess the stability and quality of the sample, and how to crystallize and prepare crystals for diffraction experiments. While general strategies for protein crystallization are summarized, specific examples of the application of these strategies to the crystallization of PTP domains are discussed.

Gamma/Hadron Separation for the HAWC Observatory

NASA Astrophysics Data System (ADS)

Gerhardt, Michael J.

The High-Altitude Water Cherenkov (HAWC) Observatory is a gamma-ray observatory sensitive to gamma rays from 100 GeV to 100 TeV with an instantaneous field of view of ˜2 sr. It is located on the Sierra Negra plateau in Mexico at an elevation of 4,100 m and began full operation in March 2015. The purpose of the detector is to study relativistic particles that are produced by interstellar and intergalactic objects such as: pulsars, supernova remnants, molecular clouds, black holes and more. To achieve optimal angular resolution, energy reconstruction and cosmic ray background suppression for the extensive air showers detected by HAWC, good timing and charge calibration are crucial, as well as optimization of quality cuts on background suppression variables. Additions to the HAWC timing calibration, in particular automating the calibration quality checks and a new method for background suppression using a multivariate analysis are presented in this thesis.

Supporting openEHR Java desktop application developers.

PubMed

Kashfi, Hajar; Torgersson, Olof

2011-01-01

The openEHR community suggests that an appropriate approach for creating a graphical user interface for an openEHR-based application is to generate forms from the underlying archetypes and templates. However, current generation techniques are not mature enough to be able to produce high quality interfaces with good usability. Therefore, developing efficient ways to combine manually designed and developed interfaces to openEHR backends is an interesting alternative. In this study, a framework for binding a pre-designed graphical user interface to an openEHR-based backend is proposed. The proposed framework contributes to the set of options available for developers. In particular we believe that the approach of combining user interface components with an openEHR backend in the proposed way might be useful in situations where the quality of the user interface is essential and for creating small scale and experimental systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickerson, Patricia O'Donnell; Summa, Deborah Ann; Liu, Cheng

The goals of this project were to demonstrate reliable, reproducible solid state bonding of aluminum 6061 alloy plates together to encapsulate DU-10 wt% Mo surrogate fuel foils. This was done as part of the CONVERT Fuel Fabrication Capability effort in Process Baseline Development . Bonding was done using Hot Isotatic Pressing (HIP) of evacuated stainless steel cans (a.k.a HIP cans) containing fuel plate components and strongbacks. Gross macroscopic measurements of HIP cans prior to HIP and after HIP were used as part of this demonstration, and were used to determine the accuracy of a finitie element model of the HIPmore » bonding process. The quality of the bonding was measured by controlled miniature bulge testing for Al-Al, Al-Zr, and Zr-DU bonds. A special objective was to determine if the HIP process consistently produces good quality bonding and to determine the best characterization techniques for technology transfer.« less

Geographical identification of saffron (Crocus sativus L.) by linear discriminant analysis applied to the UV-visible spectra of aqueous extracts.

PubMed

D'Archivio, Angelo Antonio; Maggi, Maria Anna

2017-03-15

We attempted geographical classification of saffron using UV-visible spectroscopy, conventionally adopted for quality grading according to the ISO Normative 3632. We investigated 81 saffron samples produced in L'Aquila, Città della Pieve, Cascia, and Sardinia (Italy) and commercial products purchased in various supermarkets. Exploratory principal component analysis applied to the UV-vis spectra of saffron aqueous extracts revealed a clear differentiation of the samples belonging to different quality categories, but a poor separation according to the geographical origin of the spices. On the other hand, linear discriminant analysis based on 8 selected absorbance values, concentrated near 279, 305 and 328nm, allowed a good distinction of the spices coming from different sites. Under severe validation conditions (30% and 50% of saffron samples in the evaluation set), correct predictions were 85 and 83%, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

Quality of remote sensing measurements of cloud physical parameters in the cooperative convective precipitation experiment

NASA Technical Reports Server (NTRS)

Wu, M.-L.

1985-01-01

In order to develop the remote sensing techniques to infer cloud physical parameters, a multispectral cloud radiometer (MCR) was mounted on a NASA high-altitude aircraft in conjunction with the Cooperative Convective Precipitation Experiment in 1981. The MCR has seven spectral channels, of which three are centered near windows associated with water vapor bands in the near infrared, two are centered near the oxygen A band at 0.76 microns, one is centered at the 1.14-micron water vapor band, and one is centered in the thermal infrared. The reflectance and temperature measured on May 31, 1981, are presented together with theoretical calculations. The results indicate that the MCR produces quality measurements. Therefore several cloud parameters can be derived with good accuracy. The parameters are the cloud-scaled optical thickness, cloud top pressure, volume scattering coefficient, particle thermodynamic phase, effective mean particle size, and cloud-top temperature.

Application of frequency domain handling qualities criteria to the longitudinal landing task

NASA Technical Reports Server (NTRS)

Sarrafian, S. K.; Powers, B. G.

1985-01-01

Under NASA sponsorship, an in-flight simulation of the longitudinal handling qualities of several configurations for the approach and landing tasks was performed on the USAF/AFWAL Total In-Flight Simulator by the Calspan Corporation. The basic configuration was a generic transport airplane with static instability. The control laws included proportional plus integral gain loops to produce pitch-rate and angle-of-attack feedback loops. The evaluation task was a conventional visual approach to a flared touchdown at a designated spot on the runway with a lateral offset. The general conclusions were that the existing criteria are based on pitch-attitude response and that these characteristics do not adequately discriminate between the good and bad configurations of this study. This paper describes the work that has been done to further develop frequency-based criteria in an effort to provide better correlation with the observed data.

Growth kinetic and fuel quality parameters as selective criterion for screening biodiesel producing cyanobacterial strains.

PubMed

Gayathri, Manickam; Shunmugam, Sumathy; Mugasundari, Arumugam Vanmathi; Rahman, Pattanathu K S M; Muralitharan, Gangatharan

2018-01-01

The efficiency of cyanobacterial strains as biodiesel feedstock varies with the dwelling habitat. Fourteen indigenous heterocystous cyanobacterial strains from rice field ecosystem were screened based on growth kinetic and fuel parameters. The highest biomass productivity was obtained in Nostoc punctiforme MBDU 621 (19.22mg/L/day) followed by Calothrix sp. MBDU 701 (13.43mg/L/day). While lipid productivity and lipid content was highest in Nostoc spongiaeforme MBDU 704 (4.45mg/L/day and 22.5%dwt) followed by Calothrix sp. MBDU 701 (1.54mg/L/day and 10.75%dwt). Among the tested strains, Nostoc spongiaeforme MBDU 704 and Nostoc punctiforme MBDU 621 were selected as promising strains for good quality biodiesel production by Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

A database about the tornadic activity in Catalonia (NE Spain) since 1994

NASA Astrophysics Data System (ADS)

Morales, M. E.; Arús, J.; Llasat, M. C.; Castán, S.

2009-09-01

Although tornadic activity is not the most important hazard in Spain, the damages that tornadoes and downburst generate are considerable in urban areas, giving place in some occasions to casualties. In Spain, the oldest systematic works collecting data about tornadoes, refer to the Balearic Islands, although some series about tornadoes in Spain have also been collected and analysed (Gayà, 2005). These series shows a positive increase that is probably more related to a change in the perception level of the population than to climatic change. In some occasions it is difficult to separate the damages produced by the tornado itself from those produced by other associated hazards like heavy rains, hail or a wind storms. It was the case of the September 2006 event, in which flash floods and tornadoes were recorded. In the same sense in some occasions, damages produced by a downsburt are confused with those that produced by a tornado. Having in mind all these facts, having a good systematic data base about tornadoes is necessary, before to obtain some conclusions not enough justified. This kind of database is not easy to obtain, because of it requires to have detailed information about damages, meteorological observations and testimonies that has to be filtered by a good quality control. After a general presentation about tornadoes and downsbursts in Mediterranean Region, this contribution presents the database that have affected Catalonia during the period 1994-2009, starting with the tornado recorded on the Espluga de Francolí the 31 August 1994.This database has been built in basis to the AEMET information, the Consorcio de Compensación de Seguros (the insurance company of Spain for natural disasters), the newspapers and field visits to the affected places.

Castanea sativa by-products: a review on added value and sustainable application.

PubMed

Braga, Nair; Rodrigues, Francisca; Oliveira, M Beatriz P P

2015-01-01

Castanea sativa Mill. is a species of the family Fagaceae abundant in south Europe and Asia. The fruits (chestnut) are an added value resource in producing countries. Chestnut economic value is increasing not only for nutritional qualities but also for the beneficial health effects related with its consumption. During chestnut processing, a large amount of waste material is generated namely inner shell, outer shell and leaves. Studies on chestnut by-products revealed a good profile of bioactive compounds with antioxidant, anticarcinogenic and cardioprotective properties. These agro-industrial wastes, after valorisation, can be used by other industries, such as pharmaceutical, food or cosmetics, generating more profits, reducing pollution costs and improving social, economic and environmental sustainability. The purpose of this review is to provide knowledge about the type of chestnut by-products produced, the studies concerning its chemical composition and biological activity, and also to discuss other possible applications of these materials.

Physical and sensory properties of ready to eat apple chips produced by osmo-convective drying.

PubMed

Velickova, Elena; Winkelhausen, Eleonora; Kuzmanova, Slobodanka

2014-12-01

The low cost raw material, apple variety Idared, was turned into value-added product, apple chips. The apple chips were produced in a two-step process consisting of osmotic treatment and conventional drying. Osmotic treatment was carried out in 40 % glucose solution at room temperature, followed by convective drying at 105 °C, till reaching water activity of 0.3. Mechanical properties of the apple chips measured by compression and penetration tests were correlated with the sorption properties. The low browning index, 25.5 and high whitening index, 63.7, proved the good retention of the color of the apple chips. The instrumental characteristics of the apple chips were correlated with the sensory characteristics of the product. The new product was accepted by the 95 % of the panelists. The stored apple chips under modified atmosphere showed no significant changes in the quality parameters over 6 month period.

The reported quality of life of selected home hemodialysis patients.

PubMed

Molzahn, A E

1991-04-01

The quality of life (QoL) of 10 home hemodialysis (HHD) patients was studied using the Aristotelian-Thomistic philosophical theory of the good life. According to this theory, seven types of real goods are required to have a good life. Semistructured interviews were used to determine whether the patients possessed these goods. Also, card sort tasks were used to obtain the patients' ranking of these goods in terms of the importance of the goods and time spent acquiring them. It was found that the subjects were seriously deprived of some of the real goods required to have a good life, including health, vigor, pleasurable feelings, freedom of action, and free time. Goods of personal association and goods of the body were of greatest importance to the subjects. It appears that this theory has some utility in assessing QoL of patients on HHD.

19 CFR 10.530 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... other processing of those parts as necessary for improvement to sound working condition by one or more... such a new good; (p) Self-produced material. “Self-produced material” means a good, such as a part or...

Transboundary health impacts of transported global air pollution and international trade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Qiang; Jiang, Xujia; Tong, Dan

Millions of people die every year from diseases caused by exposure to outdoor air pollution1, 2, 3, 4, 5. Some studies have estimated premature mortality related to local sources of air pollution6, 7, but local air quality can also be affected by atmospheric transport of pollution from distant sources8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18. International trade is contributing to the globalization of emission and pollution as a result of the production of goods (and their associated emissions) in one region for consumption in another region14, 19, 20, 21, 22. The effects of international trade onmore » air pollutant emissions23, air quality14 and health24 have been investigated regionally, but a combined, global assessment of the health impacts related to international trade and the transport of atmospheric air pollution is lacking. Here we combine four global models to estimate premature mortality caused by fine particulate matter (PM2.5) pollution as a result of atmospheric transport and the production and consumption of goods and services in different world regions. We find that, of the 3.45 million premature deaths related to PM2.5 pollution in 2007 worldwide, about 12 per cent (411,100 deaths) were related to air pollutants emitted in a region of the world other than that in which the death occurred, and about 22 per cent (762,400 deaths) were associated with goods and services produced in one region for consumption in another. For example, PM2.5 pollution produced in China in 2007 is linked to more than 64,800 premature deaths in regions other than China, including more than 3,100 premature deaths in western Europe and the USA; on the other hand, consumption in western Europe and the USA is linked to more than 108,600 premature deaths in China. Our results reveal that the transboundary health impacts of PM2.5 pollution associated with international trade are greater than those associated with long-distance atmospheric pollutant transport.« less

First Results of Digital Topography Applied to Macromolecular Crystals

NASA Technical Reports Server (NTRS)

Lovelace, J.; Soares, A. S.; Bellamy, H.; Sweet, R. M.; Snell, E. H.; Borgstahl, G.

2004-01-01

An inexpensive digital CCD camera was used to record X-ray topographs directly from large imperfect crystals of cubic insulin. The topographs recorded were not as detailed as those which can be measured with film or emulsion plates but do show great promise. Six reflections were recorded using a set of finely spaced stills encompassing the rocking curve of each reflection. A complete topographic reflection profile could be digitally imaged in minutes. Interesting and complex internal structure was observed by this technique.The CCD chip used in the camera has anti-blooming circuitry and produced good data quality even when pixels became overloaded.

Design of a digital voice data compression technique for orbiter voice channels

NASA Technical Reports Server (NTRS)

1975-01-01

Candidate techniques were investigated for digital voice compression to a transmission rate of 8 kbps. Good voice quality, speaker recognition, and robustness in the presence of error bursts were considered. The technique of delayed-decision adaptive predictive coding is described and compared with conventional adaptive predictive coding. Results include a set of experimental simulations recorded on analog tape. The two FM broadcast segments produced show the delayed-decision technique to be virtually undegraded or minimally degraded at .001 and .01 Viterbi decoder bit error rates. Preliminary estimates of the hardware complexity of this technique indicate potential for implementation in space shuttle orbiters.

A new method of creating high intensity neutron source

NASA Astrophysics Data System (ADS)

Masuda, T.; Yoshimi, A.; Yoshimura, M.

We propose a new scheme of producing an intense neutron beam whose yields may exceed those of the existing facilities by a few to several orders of magnitude in the sub-eV region. This scheme employs a MeV gamma beam extracted from circulating quantum ions, which has been recently proposed. The gamma beam is directed to a deuteron target and the photo-disintegration process generates a neutron beam. The calculated neutron energy spectrum is nearly flat down to the neV range, and thus there exists a possibility to utilize a good quality of neutrons especially in sub-eV energy region without using a moderator.

Ancient administrative handwritten documents: X-ray analysis and imaging

PubMed Central

Albertin, F.; Astolfo, A.; Stampanoni, M.; Peccenini, Eva; Hwu, Y.; Kaplan, F.; Margaritondo, G.

2015-01-01

Handwritten characters in administrative antique documents from three centuries have been detected using different synchrotron X-ray imaging techniques. Heavy elements in ancient inks, present even for everyday administrative manuscripts as shown by X-ray fluorescence spectra, produce attenuation contrast. In most cases the image quality is good enough for tomography reconstruction in view of future applications to virtual page-by-page ‘reading’. When attenuation is too low, differential phase contrast imaging can reveal the characters from refractive index effects. The results are potentially important for new information harvesting strategies, for example from the huge Archivio di Stato collection, objective of the Venice Time Machine project. PMID:25723946

New photosensitive systems for volume phase holography

NASA Astrophysics Data System (ADS)

Bianco, Andrea; Colella, Letizia; Galli, Paola; Zanutta, Alessio; Bertarelli, Chiara

2017-05-01

Volume phase holographic elements are becoming attractive thanks to the large efficiency and good optical quality. They are based on photosensitive materials where a modulation of the refractive index is induced. In this paper, we highlight the strategies to obtain a change in the refractive index in a dielectric material, namely a change in the material density and/or in the molecular polarizability. Moreover, we show the results achieved for materials that undergo the photo-Fries reaction as function of the molecular structure and the illumination conditions. We also report the results on a system based on the diazo Meldrum's acid where volatile molecules are produced upon light exposure.

Removal of ammonia from urine vapor by a dual-catalyst system

NASA Technical Reports Server (NTRS)

Budininkas, P.

1977-01-01

The feasibility of removing ammonia from urine vapor by a low-temperature dual-catalyst system has been demonstrated. The process is based on the catalytic oxidation of ammonia to a mixture of nitrogen, nitrous oxide, and water, followed by a catalytic decomposition of the nitrous oxide into its elements. Potential ammonia oxidation and nitrous oxide decomposition catalysts were first screened with artificial gas mixtures, then tested with the actual urine vapor produced by boiling untreated urine. A suitable dual-catalyst bed arrangement was found that achieved the removal of ammonia and also organic carbon, and recovered water of good quality from urine vapor.

Ancient administrative handwritten documents: X-ray analysis and imaging.

PubMed

Albertin, F; Astolfo, A; Stampanoni, M; Peccenini, Eva; Hwu, Y; Kaplan, F; Margaritondo, G

2015-03-01

Handwritten characters in administrative antique documents from three centuries have been detected using different synchrotron X-ray imaging techniques. Heavy elements in ancient inks, present even for everyday administrative manuscripts as shown by X-ray fluorescence spectra, produce attenuation contrast. In most cases the image quality is good enough for tomography reconstruction in view of future applications to virtual page-by-page `reading'. When attenuation is too low, differential phase contrast imaging can reveal the characters from refractive index effects. The results are potentially important for new information harvesting strategies, for example from the huge Archivio di Stato collection, objective of the Venice Time Machine project.

Ovum pick-up in sheep: a comparison between different aspiration devices for optimal oocyte retrieval.

PubMed

Rodríguez, C; Anel, L; Alvarez, M; Anel, E; Boixo, J C; Chamorro, C A; de Paz, P

2006-04-01

In vivo ovum pick-up (OPU) in sheep may be improved with a proper choice of aspiration elements (needle and tubing) and aspiration vacuum pressure. In the present study, two experiments were carried out. In Expt 1, visible follicles in ovaries of slaughtered ewes (treated separately according to their diameters: small<3 mm, medium 3-5 mm and large>5 mm) were aspirated using different combinations of the three studied factors such as aspiration flow rate (10, 20, 30, 40 and 50 ml water/min), needle gauge (18 and 20 G) and tubing inner diameter (1, 2 or 3 mm internal diameter). In Expt 2, a study with two 18 G needles of different lengths (18 G: 82 mm; 18 GL: 600 mm) was carried out, using ovaries obtained post-mortem, and performing in vivo laparoscopic follicular aspiration on ewes. We considered good quality oocytes as those with both complete compact cumulus and a homogeneous cytoplasm. Recovery rate, proportion of good quality oocytes (good quality oocytes/100 oocytes recovered) and overall efficiency (good quality oocytes/100 follicles aspirated) were noted. In Expt 1, aspiration flow rate affect remarkable proportion of good quality oocytes (69.5%, 50.5%, 44.8%, 36.5% and 28.3% for flows from 10 to 50 ml/min respectively, p<0.05). Needle gauge did not affect aspiration device efficiency. Thin and intermediate tubings were more effective (overall efficiency rates: 34.9%, 32.3% and 28.1% for 1, 2 and 3 mm respectively, p<0.05). Follicle size did not affect recovery rate, but proportion of good quality oocytes was higher for large (77.9%) and medium (64.4%) follicles (p<0.05). Finally, some combinations of the aspiration device showed greater effectiveness. In Expt 2, needle length did not influence recovery rate, but good quality oocytes rate was significantly modified both post-mortem and in vivo (good quality rate for 18 G vs 18 GL needles: 69.5% vs 47.7% and 58.1% vs 25.4%, post-mortem and in vivo respectively, p<0.05). We conclude that low-aspiration flow rates (10 and 20 ml/min) with thin or intermediate tubings (1 and 2 mm), and any short needle (18 G or 20 G) are the most adequate aspiration factors for OPU in sheep.

Lake Water Quality Improvement by Using Waste Mussel Shell Powder as an Adsorbent

NASA Astrophysics Data System (ADS)

Zukri, N. I.; Khamidun, M. H.; Sapiren, M. S.; Abdullah, S.; Rahman, M. A. A.

2018-04-01

Lake water in UTHM was slightly greenish in color indicating the eutrophication process. Eutrophication problem is due to excessive amount of nutrient in the lake water which causes nuisance growth of algae and other aquatic plant. The improvement of lake water quality should be conducted wisely in preventing from eutrophication problem by using a suitable water treatment method. Natural materials, agricultural wastes and industrial wastes are locally available sources can be utilized as low-cost adsorbents. The natural abundant source of waste mussel’s shells is advantages to use as basis material to produce the low cost adsorbent for water treatment. Batch experiments were carried out with the preparation 500 ml volume of lake water sample with the dosage of 2.5g, 7.5g and 12.5g. Then the solution shaking in an incubator with 200 rpm shaking speed. The various dosage of mussel shell greatly affected pollutants removal. Both of NH4+ and PO43- have a higher percentage removal with 31.28% and 21.74% at the 7.5g of sample dosage. Other parameters such as COD and TSS also shown good percentage of removal at 7.5g of dosage sample with 44.45% and 25% respectively. While, dosage at 2.5g was performed as a good adsorption capacity of NH4+, PO43-, COD and TSS as high as 0.142, 0.234, 7.6 and 20 mg/g, respectively. These experimental results suggested that the use of mussel shell powder as good basis material in removing pollutants from lake water.

Hospital quality: a product of good management as much as good treatment.

PubMed

Hyde, Andy; Frafjord, Anders

2013-01-01

In Norway, as in most countries, the demands placed on hospitals to reduce costs and improve the quality of services are intense. Although many say that improving quality reduces costs, few can prove it. Futhermore, how many people can show that improving quality improves patient satisfaction. Diakonhjemmet hospital in Norway has designed and implemented a hospital management system based on lean principles and the PDCA (Plan-Do-Check-Act) quality circle introduced by WE Deming (Deming 2000). The results are quite impressive with improvements in quality and patient satisfaction. The hospital also runs at a profit.

Good manufacturing practices production of a purification-free oral cholera vaccine expressed in transgenic rice plants.

PubMed

Kashima, Koji; Yuki, Yoshikazu; Mejima, Mio; Kurokawa, Shiho; Suzuki, Yuji; Minakawa, Satomi; Takeyama, Natsumi; Fukuyama, Yoshiko; Azegami, Tatsuhiko; Tanimoto, Takeshi; Kuroda, Masaharu; Tamura, Minoru; Gomi, Yasuyuki; Kiyono, Hiroshi

2016-03-01

The first Good Manufacturing Practices production of a purification-free rice-based oral cholera vaccine (MucoRice-CTB) from transgenic plants in a closed cultivation system yielded a product meeting regulatory requirements. Despite our knowledge of their advantages, plant-based vaccines remain unavailable for human use in both developing and industrialized countries. A leading, practical obstacle to their widespread use is producing plant-based vaccines that meet governmental regulatory requirements. Here, we report the first production according to current Good Manufacturing Practices of a rice-based vaccine, the cholera vaccine MucoRice-CTB, at an academic institution. To this end, we established specifications and methods for the master seed bank (MSB) of MucoRice-CTB, which was previously generated as a selection-marker-free line, evaluated its propagation, and given that the stored seeds must be renewed periodically. The production of MucoRice-CTB incorporated a closed hydroponic system for cultivating the transgenic plants, to minimize variations in expression and quality during vaccine manufacture. This type of molecular farming factory can be operated year-round, generating three harvests annually, and is cost- and production-effective. Rice was polished to a ratio of 95 % and then powdered to produce the MucoRice-CTB drug substance, and the identity, potency, and safety of the MucoRice-CTB product met pre-established release requirements. The formulation of MucoRice-CTB made by fine-powdering of drug substance and packaged in an aluminum pouch is being evaluated in a physician-initiated phase I study.

Correlates of a good death and the impact of hospice involvement: findings from the national survey of households affected by cancer.

PubMed

Cagle, John G; Pek, Jolynn; Clifford, Maggie; Guralnik, Jack; Zimmerman, Sheryl

2015-03-01

Knowing how to improve the dying experience for patients with end-stage cancer is essential for cancer professionals. However, there is little evidence on the relationship between clinically relevant factors and quality of death. Also, while hospice has been linked with improved outcomes, our understanding of factors that contribute to a "good death" when hospice is involved remains limited. This study (1) identified correlates of a good death and (2) provided evidence on the impact of hospice on quality of death. Using data from a survey of US households affected by cancer (N = 930, response rate 51 %), we fit regression models with a subsample of 158 respondents who had experienced the death of a family member with cancer. Measures included quality of death (good/bad) and clinically relevant factors including: hospice involvement, symptoms during treatment, whether wishes were followed, provider knowledge/expertise, and compassion. Respondents were 60 % female, 89 % White, and averaged 57 years old. Decedents were most often a respondent's spouse (46 %). While 73 % of respondents reported a good death, Hispanics were less likely to experience good death (p = 0.007). Clinically relevant factors, including hospice, were associated with good death (p < 0.05)--an exception being whether the physician said the cancer was curable/fatal. With adjustments, perceptions of provider knowledge/expertise was the only clinical factor that remained associated with good death. Enhanced provider training/communication, referrals to hospice and greater attention to symptom management may facilitate improved quality of dying. Additionally, the cultural relevance of the concept of a "good death" warrants further research.

Quality optimization of thermally sprayed coatings produced by the JP-5000 (HVOF) gun using mathematical modeling

NASA Technical Reports Server (NTRS)

Tawfik, Hazem

1994-01-01

Currently, thermal barrier coatings (TBC) of gas-turbine blades and similar applications have centered around the use of zirconia as a protective coating for high thermal applications. The advantages of zirconia include low thermal conductivity and good thermal shock resistance. Thermally sprayed tungsten carbide hardface coatings are used for a wide range of applications spanning both the aerospace and other industrial markets. Major aircraft engine manufacturers and repair facilities use hardface coatings for original engine manufacture (OEM), as well as in the overhaul of critical engine components. The principle function of these coatings is to resist severe wear environments for such wear mechanisms as abrasion, adhesion, fretting, and erosion. The (JP-5000) thermal spray gun is the most advanced in the High Velocity Oxygen Fuel (HVOF) systems. Recently, it has received considerable attention because of its relative low cost and its production of quality coatings that challenge the very successful but yet very expensive Vacuum Plasma Spraying (VPS) system. The quality of thermal spray coatings is enhanced as porosity, oxidation, residual stress, and surface roughness are reduced or minimized. Higher densification, interfacial bonding strength, hardness and wear resistance of coating are desirable features for quality improvement.

Assessment of breadmaking performance of wheat flour dough by means of frequency dependent ultrasound

NASA Astrophysics Data System (ADS)

Braunstein, D.; Page, J. H.; Strybulevych, A.; Peressini, D.; Scanlon, M. G.

2012-12-01

Technological performance of wheat flour varies among different wheat varieties. Gluten plays a key role within the solid phase of dough in the formation and the retention of gas bubbles during breadmaking. Rheological tests are usually performed to predict breadmaking potential. The aim here was to investigate the ability of ultrasound to discriminate wheat doughs based on breadmaking qualities. The ultimate goal is the development of an online quality control system currently unavailable in the baked goods industry, rendering this work innovative. Samples were prepared from a strong wheat flour, with one control sample and one added with inulin and distilled monoglycerides, producing doughs of distinct breadmaking quality. Doughs were subjected to density determination, elongation tests, and ultrasound analysis. The ultrasound tests were performed in the frequency range of 300 kHz - 6 MHz. Ultrasonic phase velocity increased with increasing frequency to about 2 MHz, becoming constant and then decreasing from 3 MHz for the control sample. Distinct differences in attenuation coefficient between the fibre-enriched and control doughs were observed. Ultrasound can potentially add to a better understanding of dough quality and can discriminate between doughs of contrasting properties.

Is the Web as good as the lab? Comparable performance from Web and lab in cognitive/perceptual experiments.

PubMed

Germine, Laura; Nakayama, Ken; Duchaine, Bradley C; Chabris, Christopher F; Chatterjee, Garga; Wilmer, Jeremy B

2012-10-01

With the increasing sophistication and ubiquity of the Internet, behavioral research is on the cusp of a revolution that will do for population sampling what the computer did for stimulus control and measurement. It remains a common assumption, however, that data from self-selected Web samples must involve a trade-off between participant numbers and data quality. Concerns about data quality are heightened for performance-based cognitive and perceptual measures, particularly those that are timed or that involve complex stimuli. In experiments run with uncompensated, anonymous participants whose motivation for participation is unknown, reduced conscientiousness or lack of focus could produce results that would be difficult to interpret due to decreased overall performance, increased variability of performance, or increased measurement noise. Here, we addressed the question of data quality across a range of cognitive and perceptual tests. For three key performance metrics-mean performance, performance variance, and internal reliability-the results from self-selected Web samples did not differ systematically from those obtained from traditionally recruited and/or lab-tested samples. These findings demonstrate that collecting data from uncompensated, anonymous, unsupervised, self-selected participants need not reduce data quality, even for demanding cognitive and perceptual experiments.

Time lapse imaging: is it time to incorporate this technology into routine clinical practice?

PubMed

Bhide, Priya; Maheshwari, Abha; Cutting, Rachel; Seenan, Susan; Patel, Anita; Khan, Khalid; Homburg, Roy

2017-06-01

Time-lapse imaging (TLI) systems for embryo incubation, assessment and selection are a novel technology available to in vitro fertilization (IVF) clinics. However, there is uncertainty about their clinical and cost-effectiveness and insufficient good quality evidence to warrant their routine use. Despite this, enthusiastic commercial marketing and slipping clinical equipoise have led to the widespread hasty introduction of this technology into practice, often at a considerable expense to the patient. We have reviewed the published literature and aim to summarize the strengths, weaknesses, opportunities and threats of these systems. These specialized incubators provide undisturbed embryo culture conditions and, by almost continuous monitoring of embryo development, generate morphokinetic parameters to aid embryo selection. They are thus hypothesized to improve outcomes following IVF. Although literature reports improved reproductive outcomes, these outcomes are largely surrogate and there is a paucity of studies reporting live births. The use of time lapse systems may reduce early pregnancy loss, increase elective single embryo transfers and limit multiple pregnancies through better embryo selection. However, the quality of the studies and hence the evidence so far, is low to moderate quality. We recommend further research producing robust high-quality evidence for and against the use of these systems.

Quality of phenobarbital solid-dosage forms in the urban community of Nouakchott (Mauritania).

PubMed

Laroche, Marie-Laure; Traore, Hamidou; Merle, Louis; Gaulier, Jean-Michel; Viana, Marylene; Preux, Pierre-Marie

2005-08-01

Epilepsy is a major public-health problem in Africa. The quality of available drugs is a limiting factor for an adequate management. The aim of this study was to describe the proportion of poor-quality phenobarbital (PB) solid-dosage forms and evaluate the factors associated with its quality in Nouakchott (Mauritania). A cross-sectional study was carried out within pharmacies, hospitals, and on the parallel market in March 2003. PB samples were bought by a native person and then assayed by a liquid chromatography method. A package was considered to be of good quality if the active-substance average content was between 85 and 115% of the stated content printed on the packet. Forty-five pharmaceutical stores were visited, enabling us to collect 146 samples of PB. Three brand names were available in Nouakchott. They originated from France, Morocco, Senegal, and Egypt. Results: A prevalence of 13.7%[95% confidence interval (CI), 8.8-20.0] of poor-quality PB was found. All samples from Morocco were underdosed. The generic active content was satisfactory, but saccharose, an excipient with a potential side effects, was identified. Two factors associated with the good quality of PB have been put forward: tablets manufactured in France and loose packaging as generics conditioned in such a way were of good quality. This study shows that the quality of antiepileptic drugs in Africa is still worrying. The setting up of medicine quality control in Mauritania is legitimate. Considering the good quality of generic PB and its lower cost, this type of medicine should be promoted in this region.

Information About Cost of Goods Produced and its Usefulness for Production Engineers - A Case of SME

NASA Astrophysics Data System (ADS)

Maruszewska, Ewa Wanda; Strojek-Filus, Marzena; Drábková, Zita

2017-12-01

The article stresses the consequences of simplifications implemented in the measurement process of goods produced that are of crucial importance to production engineers in SME. The authors show the variety of possibilities that might be used by financial employees together with probable outputs in terms of valuation distortions. Using the case study the authors emphasis the importance of close cooperation of production engineers with finance professionals as out-puts of finance departments consist an important input for decision-making process of production managers. Further-more, demonstrated deficiencies in terms of methods applicable in financial reporting for measurement of the value of goods produced indicate the need for incorporation more financial and non-financial data in the process of judgments about the final cost of goods produced as simplifications applied in SME distort financial information provided to production engineers.

Chemistry and quality of Hibiscus (Hibiscus sabdariffa) for developing the natural-product industry in Senegal.

PubMed

Juliani, H R; Welch, C R; Wu, Q; Diouf, B; Malainy, D; Simon, J E

2009-03-01

The objectives of this study were to assess and improve the quality of the hibiscus calyces from Senegal over 2 production seasons (2004 to 2005), to develop and adapt new procedures for the determination of hibiscus anthocyanins and analysis of the 2 major ones, delphinidin-3-sambubioside and cyanidin-3-sambubioside. The foreign matter, total ashes, and acid insoluble ashes showed that the calyces harvested in 2005 were produced following hygienic practices, while the color assessment of the calyces and analysis of hibiscus active principles also showed higher amounts of anthocyanins in 2005. A protocol to measure anthocyanins by pH-differential UV-Vis spectrophotometry was adapted to measure the hibiscus anthocyanins from a water extract. The spectrophotometric method for quantitation of total anthocyanins showed a close correlation (r(2)= 0.82) when compared with the HPLC method, suggesting the use of the colorimetric method in quality control programs as an affordable alternative method to assess anthocyanin content in hibiscus. New and raised standards for the cleanliness and active principle content in hibiscus are also proposed. This study demonstrated that the implementation of a quality control program and the application of agricultural good practices in the production and processing of hibiscus calyces can lead to higher quality natural plant products.

Computational assessment of press-fit acetabular implant fixation: the effect of implant design, interference fit, bone quality, and frictional properties.

PubMed

Janssen, D; Zwartelé, R E; Doets, H C; Verdonschot, N

2010-01-01

Patients suffering from rheumatoid arthritis typically have a poor subchondral bone quality, endangering implant fixation. Using finite element analysis (FEA) an investigation was made to find whether a press-fit acetabular implant with a polar clearance would reduce interfacial micromotions and improve fixation compared with a standard hemispherical design. In addition, the effects of interference fit, friction, and implant material were analysed. Cups were introduced into an FEA model of a human pelvis with simulated subchondral bone plasticity. The models were loaded with a loading configuration simulating two cycles of normal walking, during which contact stresses and interfacial micromotions were monitored. Subsequently, a lever-out simulation was performed to assess the fixation strength of the various cases. A flattened cup with good bone quality produced the lowest interfacial micromotions. Poor bone decreased the fixation strength regardless of the geometry of the cup. Increasing the interference fit of the flattened cup compensated for the loss of fixation strength caused by poor bone quality. In conclusion, a flattened cup did not significantly improve implant fixation over a hemispherical cup in the case of poor bone quality. However, implant fixation can be optimized by increasing interference fit and avoiding inferior frictional properties and low-stiffness implants.

Adaptation of the Quality Indicator for Rehabilitative Care (QuIRC) for use in mental health supported accommodation services (QuIRC-SA).

PubMed

Killaspy, Helen; White, Sarah; Dowling, Sarah; Krotofil, Joanna; McPherson, Peter; Sandhu, Sima; Arbuthnott, Maurice; Curtis, Sarah; Leavey, Gerard; Priebe, Stefan; Shepherd, Geoff; King, Michael

2016-04-14

No standardised tools for assessing the quality of specialist mental health supported accommodation services exist. To address this, we adapted the Quality Indicator for Rehabilitative care-QuIRC-that was originally developed to assess the quality of longer term inpatient and community based mental health facilities. The QuIRC, which is completed by the service manager and gives ratings of seven domains of care, has good psychometric properties. Focus groups with staff of the three main types of supported accommodation in the UK (residential care, supported housing and floating outreach services) were carried out to identify potential amendments to the QuIRC. Additional advice was gained from consultation with three expert panels, two of which comprised service users with lived experience of mental health and supported accommodation services. The amended QuIRC (QuIRC-SA) was piloted with a manager of each of the three service types. Item response variance, inter-rater reliability and internal consistency were assessed in a random sample of 52 services. Factorial structure and discriminant validity were assessed in a larger random sample of 87 services. The QuIRC-SA comprised 143 items of which only 18 items showed a narrow range of response and five items had poor inter-rater reliability. The tool showed good discriminant validity, with supported housing services generally scoring higher than the other two types of supported accommodation on most domains. Exploratory factor analysis showed that the QuIRC-SA items loaded onto the domains to which they had been allocated. The QuIRC-SA is the first standardised tool for quality assessment of specialist mental health supported accommodation services. Its psychometric properties mean that it has potential for use in research as well as audit and quality improvement programmes. A web based application is being developed to make it more accessible which will produce a printable report for the service manager about the performance of their service, comparison data for similar services and suggestions on how to improve service quality.

The influence of early embryo traits on human embryonic stem cell derivation efficiency.

PubMed

O'Leary, Thomas; Heindryckx, Björn; Lierman, Sylvie; Van der Jeught, Margot; Menten, Björn; Deforce, Dieter; Cornelissen, Ria; de Sousa Lopes, Susana Chuva; De Sutter, Petra

2011-05-01

Despite its prognostic value in in vitro fertilization, early embryo morphology is not reported on in the derivation of human embryonic stem cell (hESC) lines. Standard hESC derivation does rely on blastocyst development and its efficiency is highly correlated to inner cell mass (ICM) quality. Poor-quality embryos (PQEs) donated for hESC derivation may have a range of cleavage-stage abnormalities that are known to compromise further development. This study was implemented to determine whether specific PQEs traits influence the efficiency of good-quality ICMs to derive new hESC lines. We found that although the types of PQEs investigated were all able to make blastocysts with good-quality ICMs, the ICMs were unequal in their ability to derive hESCs. Good-quality ICMs from embryos with multiple poor-quality traits were unable to generate hESC lines, in contrast to good-quality ICMs from embryos with a single poor-quality trait. In addition, our data suggest a direct correlation between the number of ICM cells present in the blastocyst and its capacity to derive new hESC lines. This study is the first to demonstrate that ICM quality alone is an incomplete indicator of hESC derivation and that application of in vitro fertilization-based early embryo scoring can help predict hESC derivation efficiency. Experiments aiming to quantify, improve upon, or compare hESC derivation efficiency should thus take into consideration early embryo morphology scoring for the comparison of groups with equal developmental competence.

Quality control process improvement of flexible printed circuit board by FMEA

NASA Astrophysics Data System (ADS)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Casting off vaccine supply charity -- the pace quickens. CVI goal: quality vaccines for all children.

PubMed

1995-10-01

Several proposals are offered for production of high-quality vaccines within developing countries. The World Health Organization's Vaccine Supply and Quality (VSQ) team from the Global Program for Vaccines and Immunization (GPV) visited 10 countries (Bangladesh, Brazil, Egypt, India, Indonesia, Iran, Mexico, Pakistan, Philippines, and South Africa) out of 14 priority countries (China, Russia, Thailand, and Vietnam were not visited) producing vaccines and found only two with a quality control system that was acceptable. Vaccine-producing countries are urged to consider the full costs of production that include necessary infrastructure, an independent national control authority and laboratory, manufacturers with managerial autonomy, and manufacturers with good management, a qualified staff, and adequate technology. UNICEF has urged both private and public sectors to combine forces in bringing down the price of new vaccines for distribution to a very large market. Some imaginative proposals were made by some manufacturers for vaccine production and supply for a range of less traditional vaccines. The Director of the Massachusetts Public Health Biologic Laboratories proposed the formation of a consortium of vaccine manufacturers who would support public health priorities for market-affordable, simple vaccines against the major childhood diseases. The aim would be international validation of high-quality local vaccine production in developing countries, ease of research collaboration, improvement in information exchange between countries, and structured assistance. Lack of political commitment has been blamed for poor quality local production. A small cooperative effort among some Latin American countries, the Pan American Association's Regional Vaccine System for Latin America (SIREVA), is backed by the Children's Vaccine Initiative. SIREVA is a consortium of manufacturers in Brazil, Chile, and Mexico that plans joint development of some vaccines. Donor assistance is suggested for UNICEF's new targeting strategy and global vaccine fund for well-defined and specific needs. UNICEF is the main distributor of vaccines to developing countries and aims for program sustainability and distribution of the new vaccines.

Evaluation of the quality of patient information to support informed shared decision-making.

PubMed

Godolphin, W; Towle, A; McKendry, R

2001-12-01

(a) To find out how much patient information material on display in family physicians' offices refers to management choices, and hence may be useful to support informed and shared decision-making (ISDM) by patients and (b) to evaluate the quality of print information materials exchanged during the consultation, i.e. brought in by patients or given out by family physicians. All print information available for patients and exchanged between physicians and patients was collected in a single complete day of the office practices of 21 family physicians. A published and validated instrument (DISCERN) was used to assess quality. Community office practices in the greater Vancouver area, British Columbia, Canada. The physicians were purposefully recruited by their association with the medical school Department of Family Practice, their interest in providing patients with print information and their representation of a range of practice types and location. The source of the pamphlets and these categories: available in the physicians' offices; exchanged between physician and patient; and produced with the explicit or apparent intent to support evidence-based patient choice. The quality of the print information to support ISDM, as measured by DISCERN and the ease of use and reliability of the DISCERN tool. Fewer than 50% of pamphlets available in these offices fulfilled our minimum criteria for ISDM (mentioned more than one management option). Offices varied widely in the proportion of pamphlets on display that supported ISDM and how particular the physician was in selecting materials. The DISCERN tool is quick, valid and reliable for the evaluation of patient information. The quality of patient information materials used in the consultation and available in these offices was below midpoint on the DISCERN score. Major deficiencies were with respect to the mention of choices, risks, effect of no treatment or uncertainty and reliability (source, evidence-base). Good quality information can be produced; some is available locally.

Evaluation of the quality of patient information to support informed shared decision‐making

PubMed Central

Godolphin, William; Towle, Angela; McKendry, Rachael

2008-01-01

Objectives (a) To find out how much patient information material on display in family physicians’ offices refers to management choices, and hence may be useful to support informed and shared decision‐making (ISDM) by patients and (b) to evaluate the quality of print information materials exchanged during the consultation, i.e. brought in by patients or given out by family physicians. Design All print information available for patients and exchanged between physicians and patients was collected in a single complete day of the office practices of 21 family physicians. A published and validated instrument (DISCERN) was used to assess quality. Setting and participants Community office practices in the greater Vancouver area, British Columbia, Canada. The physicians were purposefully recruited by their association with the medical school Department of Family Practice, their interest in providing patients with print information and their representation of a range of practice types and location. Main variables studied The source of the pamphlets and these categories: available in the physicians’ offices; exchanged between physician and patient; and produced with the explicit or apparent intent to support evidence‐based patient choice. Main outcome measures The quality of the print information to support ISDM, as measured by DISCERN and the ease of use and reliability of the DISCERN tool. Results and conclusions Fewer than 50% of pamphlets available in these offices fulfilled our minimum criteria for ISDM (mentioned more than one management option). Offices varied widely in the proportion of pamphlets on display that supported ISDM and how particular the physician was in selecting materials. The DISCERN tool is quick, valid and reliable for the evaluation of patient information. The quality of patient information materials used in the consultation and available in these offices was below midpoint on the DISCERN score. Major deficiencies were with respect to the mention of choices, risks, effect of no treatment or uncertainty and reliability (source, evidence‐base). Good quality information can be produced; some is available locally. PMID:11703497

Health- and vision-related quality of life in intellectually disabled children.

PubMed

Cui, Yu; Stapleton, Fiona; Suttle, Catherine; Bundy, Anita

2010-01-01

To investigate the psychometric properties of instruments for the assessment of self-reported functional vision performance and health-related quality of life in children with intellectual disabilities (IDs). Two instruments [Autoquestionnaire Enfant Image (AUQUEI), LV Prasad-Functional Vision Questionnaire (LVP-FVQ)] designed for the assessment of functional vision and health-related quality of life were adapted and administered to 168 school children with ID, aged 8 to 18 years. Rasch analysis was used to determine the appropriateness of the rating scales of these instruments and to identify any redundant items. Redundant items were excluded based on descriptive statistics and Rasch analysis, leaving 17 of 23 items in the revised AUQUEI and 16 of 22 in the LVP-FVQ. The AUQUEI items showed disordered thresholds on the rating scale. A modified step calibration (collapsed from four categories to three categories) resulted in ordered response thresholds for all items. The adjusted instrument produced an overall fit to the model (mean item infit = 1.06, SD = 0.32; mean item outfit = 1.11, SD = 0.35), indicating good construct validity. After Rasch analysis, the AUQUEI showed good content validity (person separation = 2.18; item reliability = 0.99; Cronbach alpha = 0.89). Increased similarity of person and item means and SDs on the logit scale after modification would indicate that the instrument was more applicable to the target population in its modified form. In contrast, the LVP-FVQ had a low person separation (1.35), suggesting that a more appropriate instrument is needed for assessment of vision-related quality of life in children with ID. The psychometric properties of two instruments were explored using Rasch analysis. By rescaling and reduction of items, the instruments were modified for use in a population of children with at least mild to moderate ID. However, an alternative instrument is needed for the assessment of vision-related quality of life in intellectually disabled children with normal vision or mild visual abnormalities.

Growing vegetables in developing countries for local urban populations and export markets: problems confronting small-scale producers.

PubMed

Dinham, Barbara

2003-05-01

Vegetables attract high applications of pesticides, and farmers in developing countries use many acutely toxic insecticides to control pests on these crops. With the liberalisation of agricultural markets in developing countries, the number of small-scale farmers growing vegetables for both domestic and export markets is increasing. Demand for supplies of year-round and exotic fruit and vegetables has grown in industrialised countries, but with rising quality standards and traceability requirements it is difficult for small-scale farmers to benefit from this lucrative non-traditional agricultural export trade. The demand is high for vegetables in the expanding cities in developing countries, and farmers in peri-urban areas, or rural areas with good access to the cities, are in a position to find a growing market for their produce. Poor storage facilities will often mean that farmers are forced to sell at peak times when prices are low. Farmers rarely have access to training in pesticide use, and have only limited or no access to advice on the complicated management of pesticides. The Food and Agriculture Organisation of the UN is concerned about high levels of poor quality and adulterated pesticides on sale in developing countries. Surveys repeatedly show that without training, farmers are unable to make good crop decisions: recognition of pests and their predators is generally low, leading to decisions to spray to kill any insect; knowledge of product selection, application rates and timing is poor; different products are often combined in the belief that the effect will be greater; re-entry periods after spraying and essential harvest intervals are not known; and without knowledge of alternatives, farmers will often assume that the only solution to pest problems is to spray more frequently. From a consumer's point of view, few developing countries are able to monitor pesticide residues, particularly for produce grown for home consumption: most countries do not have laboratories for even simple residue testing. Changes in European Maximum Residue Limits means that export crops will be rejected if they contain residues at the Limit of Detection of pesticides not registered in Europe. Season-long field level training in Integrated Pest Management can help farmers to become better decision-makers, and to greatly reduce pesticide use while reducing risks to their own health and environment, producing safer products for consumers, maintaining yields, and increasing incomes.

Optimization of composite flour biscuits by mixture response surface methodology.

PubMed

Okpala, Laura C; Okoli, Eric C

2013-08-01

Biscuits were produced from blends of pigeon pea, sorghum and cocoyam flours. The study was carried out using mixture response surface methodology as the optimization technique. Using the simplex centroid design, 10 formulations were obtained. Protein and sensory quality of the biscuits were analyzed. The sensory attributes studied were appearance, taste, texture, crispness and general acceptability, while the protein quality indices were biological value and net protein utilization. The results showed that while the addition of pigeon pea improved the protein quality, its addition resulted in reduced sensory ratings for all the sensory attributes with the exception of appearance. Some of the biscuits had sensory ratings, which were not significantly different (p > 0.05) from biscuits made with wheat. Rat feeding experiments indicated that the biological value and net protein utilization values obtained for most of the biscuits were above minimum recommended values. Optimization suggested biscuits containing 75.30% sorghum, 0% pigeon pea and 24.70% cocoyam flours as the best proportion of these components. This sample received good scores for the sensory attributes.

The effect of pigment matrix, temperature and amount of carrier on the yield and final color properties of spray dried purple corn (Zea mays L.) cob anthocyanin powders.

PubMed

Lao, Fei; Giusti, M Monica

2017-07-15

Spray drying is an economic technique to produce anthocyanin-based colorants. High pigments yields with minimum color degradation are desirable to maximize quality and profits. This study evaluated the impacts of purple corncob (PCC) anthocyanin extraction matrices (hot water, 40% ethanol, C18 purified), drying inlet temperature (130, 150, 170°C) and amount of carrier (2%, 5%, 10% maltodextrin) on the yields and quality of PCC anthocyanin powders. Monomeric and polymeric anthocyanins, color properties (CIELch, haze), and pigments composition before and after spray drying were determined. The yield and final color quality of spray dried PCC anthocyanins were affected (p<0.05) by all parameters evaluated. The pigment matrix, inlet temperature, and carrier amount had biggest impacts on product water solubility, pigments degradation and yield, respectively. The optimal combination of hot water extracts spray dried with 5% maltodextrin at 150°C gave the highest pigment yield (∼90%) with good solubility with the least color loss. Copyright © 2017 Elsevier Ltd. All rights reserved.

E's Are Good: Standards of Quality in Public Administration as Reflected in Discourse on Canadian Public Policy Design

ERIC Educational Resources Information Center

Baker, Dana Lee; Miller, Audrey Anna; Bratton, Todd

2015-01-01

Promoting understanding of quality in the context of good governance can be a challenging classroom exercise not only because of the potential for hijacking politicization of the discussion, but also because of the variety of ways in which public sector goals can be defined, even in the context of a single policy. Standards of quality in the…

Relationship between soybean yield/quality and soil quality in a major soybean-producing area based on a 2D-QSAR model

NASA Astrophysics Data System (ADS)

Gao, Ming; Li, Shiwei

2017-05-01

Based on experimental data of the soybean yield and quality from 30 sampling points, a quantitative structure-activity relationship model (2D-QSAR) was established using the soil quality (elements, pH, organic matter content and cation exchange capacity) as independent variables and soybean yield or quality as the dependent variable, with SPSS software. During the modeling, the full data set (30 and 14 compounds) was divided into a training set (24 and 11 compounds) for model generation and a test set (6 and 3 compounds) for model validation. The R2 values of the resulting models and data were 0.826 and 0.808 for soybean yield and quality, respectively, and all regression coefficients were significant (P < 0.05). The correlation coefficient R2pred of observed values and predicted values of the soybean yield and soybean quality in the test set were 0.961 and 0.956, respectively, indicating that the models had a good predictive ability. Moreover, the Mo, Se, K, N and organic matter contents and the cation exchange capacity of soil had a positive effect on soybean production, and the B, Mo, Se, K and N contents and cation exchange coefficient had a positive effect on soybean quality. The results are instructive for enhancing soils to improve the yield and quality of soybean, and this method can also be used to study other crops or regions, providing a theoretical basis to improving the yield and quality of crops.

Geology and ground water of the Luke area, Maricopa County, Arizona

USGS Publications Warehouse

Stulik, Ronald S.; Twenter, F.R.

1964-01-01

Luke Air Force Base, in the Salt River Valley in central Arizona. is within an intermontane basin--the Phoenix basin--in the Basin and Range lowlands province. The Luke area, the subject of this study, extends beyond the limits of the base. Ground-water resources of the Luke area were studied to determine the possibility of developing a water supply of optimum quantity and quality to supplement the base supply. Several wells drilled for this purpose, prior to the study, either produced an inadequate supply of water or produced ware-that had a high dissolved-solids content. The Phoenix basin is filled with unconsolidated to semiconsolidated Tertiary and Quaternary sedimentary rocks that are referred to as valley fill. Although its total thickness is unknown, 2,784 feet of valley fill--primarily consisting of clay, silt, sand, and gravel--has been penetrated. Percentage-distribution maps of fine-grained materials indicate a gross-facies pattern and a selective depositional area of the valley-fill materials. The maps also indicate that the areal distribution of fine-grained materials increases with depth. In general, the better producing wells, regardless of depth, are in areas where tee valley fill is composed of less than 60 percent fine-grained materials. The water table in the area is declining because large quantities of water are withdrawn and recharge is negligible. The decline near Luke Air Force Base during the period 1941-61 was about 150 feet. Ground water was moving generally southwest in the spring of 1961. Locally, changes in the direction of movement indicate diversion toward two major depressions. The dissolved-solids content of the ground water ranged from about 190 to 6,300 ppm. The highest concentration of dissolved solids is in water from the southern part of the area and seems to come from relatively shallow depths; wells in the northern part generally yield water of good quality. After a reconnaissance of the area, the U.S. Geological Survey located and supervised the drilling of two test wells--wells (B-2-1) 9bcb and (B-2-1) 5abc?on Luke Air Force Base. The quantity of water produced by the wells was adequate. The dissolved-solids content of water from the wells was low, and the overall quality of water from well (B-2-1) 5abc was good. When well (B-2-1) 9bcb was perforated between 907 and 977 feet, the water had a fluoride concentration of 4.4 ppm; however, the fluoride concentration decreased to 2.8 ppm when new perforations were cut at a shallower depth, and it was decided that dilution with other base water supplies probably would alleviate any possible fluoride problem.

Technology Development of Salak (Salacca Zalacca) Chips With Vacuum Frying Machine Base On Expert System In Kramat-Bangkalan Regency

NASA Astrophysics Data System (ADS)

Rosida, D. F.; Happyanto; Anggraeni; Sugiarto; Hapsari

2018-01-01

Agropolitan Program is one form of regional development to improve agribusiness system and effort to improve the welfare of the community. One of the leading commodities in Bangkalan agroclimates is salak which is a potentially very large commodity to be developed. Salak commodities in Kramat Bangkalan Indonesia have developed varous salak produced such as dates of salak, syrup and dodol salak. Salak chips was the target of innovation from processed salak. The Production of salak chips using frying technology with vacuum system to obtain crunchy chips. To get the results need to be developed synergy technology to combine the process conditions and the right system in producing good quality salak chips. Bangkalan Regency is the potential to continue to develop products using a variety of salak to the processed form of vacuum frying machine based on expert system so that the resulting product would be great texture, aroma and taste. This will make the area of Bangkalan, Indonesia be more independent in producing and increasing revenue.

Solar energy in food processing-a critical appraisal.

PubMed

Eswara, Amruta R; Ramakrishnarao, M

2013-04-01

Increasing population and high cost of fuels have created opportunities for using alternate energies for post-harvest processing of foods. Solar food processing is an emerging technology that provides good quality foods at low or no additional fuel costs. A number of solar dryers, collectors and concentrators are currently being used for various steps in food processing and value addition. Society for Energy, Environment and Development (SEED) developed Solar Cabinet Dryer with forced circulation which has been used for dehydration and development of value added products from locally grown fruits, vegetables, leafy greens and forest produce. Drying under simulated shade conditions using UV-reducing Blue filter helps retain nutrients better. Its simple design and ease of handling makes SEED Solar Dryer an ideal choice for application of food processing in rural settings, closer to where the harvest is produced, eliminating the need for expensive transportation or storage of fresh produce. It also creates employment opportunities among the rural population, especially women. Other gadgets based on solar collectors and concentrators currently being used at various steps of food processing are reviewed.

Microwave pyrolysis with KOH/NaOH mixture activation: A new approach to produce micro-mesoporous activated carbon for textile dye adsorption.

PubMed

Liew, Rock Keey; Azwar, Elfina; Yek, Peter Nai Yuh; Lim, Xin Yi; Cheng, Chin Kui; Ng, Jo-Han; Jusoh, Ahmad; Lam, Wei Haur; Ibrahim, Mohd Danial; Ma, Nyuk Ling; Lam, Su Shiung

2018-06-19

A micro-mesoporous activated carbon (AC) was produced via an innovative approach combining microwave pyrolysis and chemical activation using NaOH/KOH mixture. The pyrolysis was examined over different chemical impregnation ratio, microwave power, microwave irradiation time and types of activating agents for the yield, chemical composition, and porous characteristic of the AC obtained. The AC was then tested for its feasibility as textile dye adsorbent. About 29 wt% yield of AC was obtained from the banana peel with low ash and moisture (<5 wt%), and showed a micro-mesoporous structure with high BET surface area (≤1038 m 2 /g) and pore volume (≤0.80 cm 3 /g), indicating that it can be utilized as adsorbent to remove dye. Up to 90% adsorption of malachite green dye was achieved by the AC. Our results indicate that the microwave-activation approach represents a promising attempt to produce good quality AC for dye adsorption. Copyright © 2018 Elsevier Ltd. All rights reserved.

LPWA using supersonic gas jet with tailored density profile

NASA Astrophysics Data System (ADS)

Kononenko, O.; Bohlen, S.; Dale, J.; D'Arcy, R.; Dinter, M.; Erbe, J. H.; Indorf, G.; di Lucchio, L.; Goldberg, L.; Gruse, J. N.; Karstensen, S.; Libov, V.; Ludwig, K.; Martinez de La Ossa, A.; Marutzky, F.; Niroula, A.; Osterhoff, J.; Quast, M.; Schaper, L.; Schwinkendorf, J.-P.; Streeter, M.; Tauscher, G.; Weichert, S.; Palmer, C.; Horbatiuk, Taras

2016-10-01

Laser driven plasma wakefield accelerators have been explored as a potential compact, reproducible source of relativistic electron bunches, utilising an electric field of many GV/m. Control over injection of electrons into the wakefield is of crucial importance in producing stable, mono-energetic electron bunches. Density tailoring of the target, to control the acceleration process, can also be used to improve the quality of the bunch. By using gas jets to provide tailored targets it is possible to provide good access for plasma diagnostics while also producing sharp density gradients for density down-ramp injection. OpenFOAM hydrodynamic simulations were used to investigate the possibility of producing tailored density targets in a supersonic gas jet. Particle-in-cell simulations of the resulting density profiles modelled the effect of the tailored density on the properties of the accelerated electron bunch. Here, we present the simulation results together with preliminary experimental measurements of electron and x-ray properties from LPWA experiments using gas jet targets and a 25 TW, 25 fs Ti:Sa laser system at DESY.

Extraction of extracellular lipids from chemoautotrophic bacteria Serratia sp. ISTD04 for production of biodiesel.

PubMed

Bharti, Randhir K; Srivastava, Shaili; Thakur, Indu Shekhar

2014-08-01

A CO2 sequestering bacterial strain, Serratia sp. ISTD04, that produces a significant amount of extracellular lipids was isolated from marble mine rocks. (14)C labeling analysis revealed that the rate of assimilation of CO2 by the strain is 0.756×10(-9)μmolCO2fixedcell(-1)h(-1). It was found to produce 466mg/l of extracellular lipid which was characterized using (1)H NMR. After transesterification of lipids, the total saturated and unsaturated FAME was found to be 51% and 49% respectively. The major FAME contained in the biodiesel were palmitic acid methyl ester (C16:0), oleic acid methyl ester (C18:1) and 10-nonadecenoic acid methyl ester (C19:1). Biodiesel produced by Serratia sp. ISTD04 is balanced in terms of FAME composition of good quality. It also contained higher proportion of oleic acid (35%) which makes it suitable for utilization in existing engines. Thus, the strain can be harnessed commercially to sequester CO2 into biodiesel. Copyright © 2014 Elsevier Ltd. All rights reserved.

Application of terrestrial photogrammetry for the mass balance calculation on Montasio Occidentale Glacier (Julian Alps, Italy)

NASA Astrophysics Data System (ADS)

Piermattei, Livia; Carturan, Luca; Calligaro, Simone; Blasone, Giacomo; Guarnieri, Alberto; Tarolli, Paolo; Dalla Fontana, Giancarlo; Vettore, Antonio

2014-05-01

Digital elevation models (DEMs) of glaciated terrain are commonly used to measure changes in geometry and hence infer the mass balance of glaciers. Different tools and methods exist to obtain information about the 3D geometry of terrain. Recent improvements on the quality and performance of digital cameras for close-range photogrammetry, and the development of automatic digital photogrammetric processing makes the 'structure from motion' photogrammetric technique (SfM) competitive for high quality 3D models production, compared to efficient but also expensive and logistically-demanding survey technologies such as airborn and terrestrial laser scanner (TLS). The purpose of this work is to test the SfM approach, using a consumer-grade SLR camera and the low-cost computer vision-based software package Agisoft Photoscan (Agisoft LLC), to monitor the mass balance of Montasio Occidentale glacier, a 0.07km2, low-altitude, debris-covered glacier located in the Eastern Italian Alps. The quality of the 3D models produced by the SfM process has been assessed by comparison with digital terrain models obtained through TLS surveys carried out at the same dates. TLS technique has indeed proved to be very effective in determining the volume change of this glacier in the last years. Our results shows that the photogrammetric approach can produce point cloud densities comparable to those derived from TLS measurements. Furthermore, the horizontal and vertical accuracies are also of the same order of magnitude as for TLS (centimetric to decimetric). The effect of different landscape characteristics (e.g. distance from the camera or terrain gradient) and of different substrata (rock, debris, ice, snow and firn) was also evaluated in terms of SfM reconstruction's accuracy vs. TLS. Given the good results obtained on the Montasio Occidentale glacier, it can be concluded that the terrestrial photogrammetry, with the advantageous features of portability, ease of use and above all low costs, allows to obtain high-resolution DEMs which enable good mass balance estimations on glaciers with similar characteristics.

Analysis of rice purchase decision on rice consumer in Bandung city

NASA Astrophysics Data System (ADS)

Kusno, K.; Imannurdin, A.; Syamsiyah, N.; Djuwendah, E.

2018-03-01

This study was conducted at three kinds of purchase location which were traditional market, rice kiosk, and supermarket in Bandung City, with survey data of 108 respondents which were selected by systematic random sampling. The aim of this study is to (1) identify consumer characteristics, (2) identify which atribute is considered by consumer in buying rice, and (3) analyze the relationship between purchase decision and income class. Data were analyzed by descriptive analysis and Chi Square test. The results showed most consumers in the traditional market were middle-educated and lower middle-income, at the rice kiosk, the consumer were generally middle-educated and middle-income, and in the supermarkets, the majority were high-educated and upper middle-income consumers. “Kepulenan” be the first priority of most consumers, but for the lower-middle class, the main priority was price. Thus, in case of scarcity and rice price increase, the government should immediately arrange market operations which targeting to lower-middle class consumers. There was a significant relationship between (1) the quality of rice consumed, (2) the frequency of rice purchase per month, and (3) attitudes toward rice price increase; each with the income class. Although the price of rice increase, consumers of middle and upper-middle were remain loyal to the quality of rice they consumed. This indicates rice market in Bandung city is an ideal market for premium rice so that traders and producers are expected to maintain the quality of rice, such as keep using superior seeds and applying good cultivation based on Good Agricultural Practice (GAP) rules.

19 CFR 181.11 - Certificate of Origin.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Certificate on the basis of: (1) Its knowledge of whether the good qualifies as an originating good; (2) Its reasonable reliance on the producer's written representation that the good qualifies as an originating good...

19 CFR 181.11 - Certificate of Origin.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Certificate on the basis of: (1) Its knowledge of whether the good qualifies as an originating good; (2) Its reasonable reliance on the producer's written representation that the good qualifies as an originating good...

Wavefront measurement of single-mode quantum cascade laser beam for seed application in laser-produced plasma extreme ultraviolet system.

PubMed

Nowak, Krzysztof M; Ohta, Takeshi; Suganuma, Takashi; Yokotsuka, Toshio; Fujimoto, Junichi; Mizoguchi, Hakaru

2012-12-01

Quantum cascade laser (QCL) is a very attractive seed source for a multikilowatt pulsed CO2 lasers applied for driving extreme ultraviolet emitting plasmas. In this Letter, we investigate output beam properties of a QCL designed to address P18 and P20 lines of 10.6 micron band of CO2 molecule. In particular, output beam quality and stability are investigated for the first time. A well-defined linear polarization and a single-mode operation enabled a use of phase retrieval method for full description of QCL output beam. A direct, multi-image numerical phase retrieval technique was developed and successfully applied to the measured intensity patterns of a QCL beam. Very good agreement between the measured and reconstructed beam profiles was observed at distances ranging from QCL aperture to infinity, proving a good understanding of the beam propagation. The results also confirm a high spatial coherence and high stability of the beam parameters, the features expected from an excellent seed source.

[Virtual audiovisual talking heads: articulatory data and models--applications].

PubMed

Badin, P; Elisei, F; Bailly, G; Savariaux, C; Serrurier, A; Tarabalka, Y

2007-01-01

In the framework of experimental phonetics, our approach to the study of speech production is based on the measurement, the analysis and the modeling of orofacial articulators such as the jaw, the face and the lips, the tongue or the velum. Therefore, we present in this article experimental techniques that allow characterising the shape and movement of speech articulators (static and dynamic MRI, computed tomodensitometry, electromagnetic articulography, video recording). We then describe the linear models of the various organs that we can elaborate from speaker-specific articulatory data. We show that these models, that exhibit a good geometrical resolution, can be controlled from articulatory data with a good temporal resolution and can thus permit the reconstruction of high quality animation of the articulators. These models, that we have integrated in a virtual talking head, can produce augmented audiovisual speech. In this framework, we have assessed the natural tongue reading capabilities of human subjects by means of audiovisual perception tests. We conclude by suggesting a number of other applications of talking heads.

The public health impact of a new simple practical technique for collection and transfer of toxic jellyfish specimens and for nematocyst identification.

PubMed

Thaikruea, Lakkana; Santidherakul, Sineenart

2018-05-01

Our team aimed to create a new, simple, and inexpensive technique for collecting and transferring of toxic jellyfish specimens and for nematocysts identification. We collected tentacles of Chironex spp., Morbakka spp., and Physalia spp., and transferred them from the beaches by standard and by 'vacuum sticky tape' (VST) techniques. For the VST technique, our team placed the sticky tape on a tentacle and then folded it over to seal the tentacle in the equivalent of a vacuum. We kept the VST in room temperature. For nematocyst identification, we placed the VST on a glass microscope slide and took photographs down the microscope's eye piece using a mobile phone camera. The image quality was as good as when produced by standard techniques. Different classes of toxic jellyfish could be identified. Thus, VST is a potential public health breakthrough because it is practical, durable, inexpensive, allows good discrimination. It enables early warning of danger to health and rapid response via social network.

Decision method for optimal selection of warehouse material handling strategies by production companies

NASA Astrophysics Data System (ADS)

Dobos, P.; Tamás, P.; Illés, B.

2016-11-01

Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

The Design and Performance Evaluation of Hydroformed Tubular Torsion Beam Axle

NASA Astrophysics Data System (ADS)

Kim, Jaehyun; Oh, Jinho; Choi, Hanho

2010-06-01

Suspensions for vehicles are structural devices used for suspending a vehicle body and absorbing shocks from the road. Thus, the suspensions must be designed such that they can attenuate shocks from a road and make passengers feel comfortable despite the shocks, and improve steering stability, determined by the ground contact force of tires during running of vehicles. Another important factor to be considered while designing suspensions is that the suspensions must maintain desired stiffness and desired durability despite the repeated application of shocks from roads thereto. The present relates, in general, to a tubular torsion beam for rear suspensions of vehicles and a manufacturing method thereof and, more particularly, to the provision of tubular torsion beams having excellent roll stiffness and excellent roll strength, produced through hydroforming. The hydroforming technology has a lot of benefit which is shape accuracy, good durability caused by compressive pressure, and good forming quality. In this study, the performance evaluation of the hydroformed tubular torsion beam axle is evaluated.

Fresh and aged human lymphocyte metaphase slides are equally usable for GTG banding.

PubMed

Sajjad, Naheed; Haque, Sayedul; SBurney, Syed Intesar; Shahid, Syed Muhammad; Zehra, Sitwat; Azhar, Abid

2014-09-01

The identification of chromosomes for routine cytogenetic analysis is based on quality of metaphases and good banding pattern. Fresh slides of human lymphocytes have been shown to produce good bands for the identification of chromosomes morphology. G-bands by Trypsin using Giemsa (GTG) banding of aged slides is generally considered hard to get desired band pattern of chromosomes persistently. The current study is focused on GTG banding of aged slides. A total of 340 subjects including 290 primary infertile and 50 fertile were selected. The blood samples were drawn aseptically for cytogenetic analysis. Lymphocytes were cultured and GTG banding was done on 1440 glass slides. Giemsa trypsin banding of aged slides were done by adjusting average trypsin time for each month according to the slide age and metaphase concentration. Correlation analyses showed a significant and positive correlation between slide ageing and trypsin pre-treatment time. The results of this study suggest that, the fresh and aged human lymphocyte metaphases are equally usable for GTG banding.

Coccygectomy for stubborn coccydynia.

PubMed

Cheng, Shao-wen; Chen, Qing-yu; Lin, Zhong-qin; Wang, Wei; Zhang, Wei; Kou, Dong-quan; Shen, Yue; Ying, Xiao-zhou; Cheng, Xiao-jie; Lü, Chuan-zhu; Peng, Lei

2011-02-01

To evaluate the preliminary clinical outcomes of coccygectomy in patients with coccydynia after a failure of conservative treatment. From May 2002 to January 2010, 31 patients with coccydynia were treated by coccygectomy in our department after conservative measures had failed to produce significant relief. A questionnaire, which included the extent of relief in the painful area, improvement in quality of life, intensity of pain in the sitting position, and pain score during daily activities, was used to evaluate the results. All patients were followed up for 1 to 6 years (mean 3.3 years). The results were excellent in 20 patients (64.5%), good in 7 patients (22.6%), moderate in 3 patients (9.7%) and poor in 1 patient (3.2%). The excellent and good rates amounted to 87.1%. All patients except one had complete resolution of their symptoms and were subjectively highly satisfied with the outcomes of the surgery. Only 2 cases of superficial infection were observed postoperatively. Coccygectomy is a feasible management option for patients with coccygodynia that has no response to conservative treatments.

Correlates of a Good Death and the Impact of Hospice Involvement: Findings from the National Survey of Households Affected by Cancer

PubMed Central

Cagle, John G.; Pek, Jolynn; Clifford, Maggie; Guralnik, Jack; Zimmerman, Sheryl

2017-01-01

Purpose Knowing how to improve the dying experience for patients with end-stage cancer is essential for cancer professionals. However, there is little evidence on the relationship between clinically relevant factors and quality of death. Also, while hospice has been linked with improved outcomes, our understanding of factors that contribute to a “good death” when hospice is involved remains limited. This study (1) identified correlates of a good death; and, (2) provided evidence on the impact of hospice on quality of death. Methods Using data from a survey of US households affected by cancer (N=930, response rate 51%), we fit regression models with a subsample of 158 respondents who had experienced the death of a family member with cancer. Measures included quality of death (good/bad) and clinically relevant factors including: hospice involvement, symptoms during treatment, whether wishes were followed, provider knowledge/expertise and compassion. Results Respondents were 60% female, 89% White, and averaged 57 years old. Decedents were most often a respondent's spouse (46%). While 73% of respondents reported a good death, Hispanics were less likely to experience good death (p=.007). Clinically relevant factors, including hospice, were associated with good death (p<.05) -- an exception being whether the physician said the cancer was curable/fatal. With adjustments, perceptions of provider knowledge/expertise was the only clinical factor that remained associated with good death. Conclusions Enhanced provider training/communication, referrals to hospice and greater attention to symptom management may facilitate improved quality of dying. Additionally, the cultural relevance of the concept of a “good death” warrants further research. PMID:25194877

Study and assessment of segregated biowaste composting: The case study of Attica municipalities.

PubMed

Malamis, D; Bourka, A; Stamatopoulou, Ε; Moustakas, K; Skiadi, O; Loizidou, M

2017-12-01

This work aims to assess the operation of the first large scale segregated biowaste composting scheme in Greece to divert Household Food Waste (HFW) from landfill and produce a material which can be recovered and used as compost. The source separation and collection of HFW was deployed in selected areas in Attica Region serving about 3700 households. Sorted HFW is collected & transported to the Mechanical and Biological Treatment (MBT) plant in Attica Region that has been designed to produce Compost Like Output (CLO) from mixed MSW. The MBT facility has been adjusted in order to receive and treat aerobically HFW mixed with shredded green waste in a dedicated composting tunnel. The composting process was monitored against temperature, moisture and oxygen content indicating that the biological conditions are sufficiently developed. The product quality was examined and assessed against the quality specifications of EU End of Waste Criteria for biowaste subjected to composting aiming to specify whether the HFW that has undergone recovery ceases to be waste and can be classified as compost. More specifically, the heavy metals concentrations (Cr, Cu, Ni, Cd, Pb, Zn and Hg) are within the set limits and much lower compared to the CLO material that currently is being produced at the MBT plant. In regard to the hygienic requirements of the product it has been found that the process conditions result in a pathogen free material (i.e. E. Coli and Salmonella) which does not favor the growth of viable weeds and plant propagules, while it acquires sufficient organic matter content for soil fertilization. Noticeable physical impurities (mainly fractions of glass) have been detected exceeding the quality control threshold limit of 0.5% w/w (plastics, metals and glass). The latter is related to the missorted materials and to the limited pre-treatment configurations prior to composting. The above findings indicate that effective source separation of biowaste is prerequisite for good quality production and marketing of compost and special consideration should be made to minimize glass impurities prior composting (i.e. awareness raising and pretreatment stage). Therefore, it is feasible to gradually replace the production of questionable quality CLO in MBTs with biowaste compost which is in line with the required quality control standards especially when heavy metals concentrations is concerned. Copyright © 2016 Elsevier Ltd. All rights reserved.

New Trends in the Uses of Yeasts in Oenology.

PubMed

Querol, Amparo; Pérez-Torrado, Roberto; Alonso-Del-Real, Javier; Minebois, Romain; Stribny, Jiri; Oliveira, Bruno M; Barrio, Eladio

2018-01-01

The most important factor in winemaking is the quality of the final product and the new trends in oenology are dictated by wine consumers and producers. Traditionally the red wine is the most consumed and more popular; however, in the last times, the wine companies try to attract other groups of populations, especially young people and women that prefer sweet, whites or rosé wines, very fruity and with low alcohol content. Besides the new trends in consumer preferences, there are also increased concerns on the effects of alcohol consumption on health and the effects of global climate change on grape ripening and wine composition producing wines with high alcohol content. Although S. cerevisiae is the most frequent species in wines, and the subject of most studies, S. uvarum and hybrids between Saccharomyces species such as S. cerevisiae×S. kudriavzevii and S. cerevisiae×S. uvarum are also involved in wine fermentations and can be preponderant in certain wine regions. New yeast starters of non-cerevisiae strains (S. uvarum) or hybrids (S. cerevisiae×S. uvarum and S. cerevisiae×S. kudriavzevii) can contribute to solve some problems of the wineries. They exhibit good fermentative capabilities at low temperatures, producing wines with lower alcohol and higher glycerol amounts, while fulfilling the requirements of the commercial yeasts, such as a good fermentative performance and aromatic profiles that are of great interest for the wine industry. In this review, we will analyze different applications of nonconventional yeasts to solve the current winemaking demands. © 2018 Elsevier Inc. All rights reserved.

[Implementation of good quality and safety practices. Descriptive study in a occupational mutual health centre].

PubMed

Manzanera, R; Plana, M; Moya, D; Ortner, J; Mira, J J

2016-01-01

To describe the level of implementation of quality and safety good practice elements in a Mutual Society health centre. A Cross-sectional study was conducted to assess the level of implementation of good practices using a questionnaire. Some quality dimensions were also assessed (scale 0 to 10) by a set of 87 quality coordinators of health centres and a random sample of 54 healthcare professionals working in small centres. Seventy quality coordinators and 27 professionals replied (response rates 80% and 50%, respectively. There were no differences in the assessment of quality attributes between both groups. They identified as areas for improvement: use of practice guidelines (7.6/10), scientific and technical skills (7.5/10), and patient satisfaction (7.7/10). Availability and accessibility to clinical reports, informed consent, availability of hydro-alcoholic solution, and to record allergies, were considered of high importance to be implemented, with training and research, improvements in equipment and technology plans, adherence to clinical practice guidelines and the preparation of risk maps, being of less importance. The good practices related to equipment and resources have a higher likelihood to be implemented, meanwhile those related to quality and safety attitudes have more barriers before being implemented. The mutual has a similar behaviour than other healthcare institutions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Acorn production in northern red oak stands in northwestern Pennsylvania

Treesearch

L. R. Auchmoody; H. Clay Smith; Russell S. Walters

1993-01-01

Northern red oak acorn production was measured in 21 maturing stands on good sites in northwestern Pennsylvania. The number of acorns produced per acre varied from a low of 7,000 to nearly 273,000. Acorns were produced in all years. In no year was there consistently good acorn production at all areas, nor was there a good crop for more than two consecutive years at any...

Comparison between faculty and students perspectives on the qualities of a good medical teacher: A cross-sectional study.

PubMed

Al-Mohaimeed, Abdulrahman A

2018-01-01

This study aimed to explore faculty and students perceptions on the qualities of good medical teachers, and to determine whether the opinions of faculty and students differed. Two quantitative surveys were performed at Qassim University College of Medicine using a pretested self-administered questionnaire distributed to the faculty and students of the college. It captured their opinions about qualities and attributes of good teachers. Each item was measured on a 5-point Likert scale. Data were entered and analyzed using SPSS. A total of 90 faculty and 356 students responded with a response rate of 64%. Overall scores on the performance and personality scales were similar between faculty and students. Faculty and students agreed that "organizes good lectures/use of audiovisual aids" and "expert on the subject/knowledgeable" are important attributes and that telling jokes and the sense of humor or sharing personal experiences are not as important. Students felt it is important for an educator to be respectful, good planner and examiner, whereas faculty members felt that communication skills are of high importance. Faculty development programs should be designed to help faculty develop and improve on the identified qualities.

Health-Related Quality of Life after Restorative Proctocolectomy: A Cross-Sectional Study.

PubMed

Helavirta, I; Hyöty, M; Oksanen, P; Huhtala, H; Haapamäki, J; Aitola, P

2018-05-01

Patients undergoing restorative proctocolectomy have often suffered from active ulcerative colitis which should be remembered when assessing quality of life after operation. The aim of this study was to explore health-related quality of life after restorative proctocolectomy in those with poor or good pouch function and to compare that to patients with active or inactive ulcerative colitis and to the general population. Altogether, 282 restorative proctocolectomy patients were investigated. The control group comprised 408 ulcerative colitis patients from the local register. Generic 15D and disease-specific inflammatory bowel disease questionnaire health-related quality of life instruments were used. Population-based data were available for 15D. Pouch function was evaluated with Öresland score and colitis activity with simple clinical colitis activity index. 15D results showed that patients with good pouch function had health-related quality of life similar to that of the general population. Health-related quality of life with inflammatory bowel disease questionnaire was equally good in patients with good pouch function (n = 131; 70%) and inactive colitis (n = 95; 63%), and equally impaired in patients with poor pouch function (n = 56; 30%) and active colitis (n = 18; 12%). The majority of patients had health-related quality of life comparable to that in general population. Most patients with active ulcerative colitis are likely to improve their health-related quality of life after successful surgery. These findings are important when informing colitis patients about life after surgery.

Patient Safety Reporting Systems: Sustained Quality Improvement Using a Multidisciplinary Team and “Good Catch” Awards

PubMed Central

Herzer, Kurt R.; Mirrer, Meredith; Xie, Yanjun; Steppan, Jochen; Li, Matthew; Jung, Clinton; Cover, Renee; Doyle, Peter A.; Mark, Lynette J.

2014-01-01

Background Since 1999, hospitals have made substantial commitments to healthcare quality and patient safety through individual initiatives of executive leadership involvement in quality, investments in safety culture, education and training for medical students and residents in quality and safety, the creation of patient safety committees, and implementation of patient safety reporting systems. Cohesive quality and safety approaches have become comprehensive programs to identify and mitigate hazards that could harm patients. This article moves to the next level with an intense refocusing of attention on one of the individual components of a comprehensive program--the patient safety reporting system—with a goal of maximized usefulness of the reports and long-term sustainability of quality improvements arising from them. Methods A six-phase framework was developed to deal with patient safety hazards: identify, report, analyze, mitigate, reward, and follow up. Unique features of this process included a multidisciplinary team to review reports, mitigate hazards, educate and empower providers, recognize the identifying/reporting individuals or groups with “Good Catch” awards, and follow up to determine if quality improvements were sustained over time. Results To date, 29 patient safety hazards have gone through this process with “Good Catch” awards being granted at our institution. These awards were presented at various times over the past 4 years since the process began in 2008. Follow-up revealed that 86% of the associated quality improvements have been sustained over time since the awards were given. We present the details of two of these “Good Catch” awards: vials of heparin with an unusually high concentration of the drug that posed a potential overdose hazard and a rapid infusion device that resisted practitioner control. Conclusion A multidisciplinary team's analysis and mitigation of hazards identified in a patient safety reporting system, positive recognition with a “Good Catch” award, education of practitioners, and long-term follow-up resulted in an outcome of sustained quality improvement initiatives. PMID:22946251

Perceptual and Acoustic Analyses of Good Voice Quality in Male Radio Performers.

PubMed

Warhurst, Samantha; Madill, Catherine; McCabe, Patricia; Ternström, Sten; Yiu, Edwin; Heard, Robert

2017-03-01

Good voice quality is an asset to professional voice users, including radio performers. We examined whether (1) voices could be reliably categorized as good for the radio and (2) these categories could be predicted using acoustic measures. Male radio performers (n = 24) and age-matched male controls performed "The Rainbow Passage" as if presenting on the radio. Voice samples were rated using a three-stage paired-comparison paradigm by 51 naive listeners and perceptual categories were identified (Study 1), and then analyzed for fundamental frequency, long-term average spectrum, cepstral peak prominence, and pause or spoken-phrase duration (Study 2). Study 1: Good inter-judge reliability was found for perceptual judgments of the best 15 voices (good for radio category, 14/15 = radio performers), but agreement on the remaining 33 voices (unranked category) was poor. Study 2: Discriminant function analyses showed that the SD standard deviation of sounded portion duration, equivalent sound level, and smoothed cepstral peak prominence predicted membership of categories with moderate accuracy (R 2  = 0.328). Radio performers are heterogeneous for voice quality; good voice quality was judged reliably in only 14 out of 24 radio performers. Current acoustic analyses detected some of the relevant signal properties that were salient in these judgments. More refined perceptual analysis and the use of other perceptual methods might provide more information on the complex nature of judging good voices. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Optical design and development of a fiber coupled high-power diode laser system for laser transmission welding of plastics

NASA Astrophysics Data System (ADS)

Rodríguez-Vidal, Eva; Quintana, Iban; Etxarri, Jon; Azkorbebeitia, Urko; Otaduy, Deitze; González, Francisco; Moreno, Fernando

2012-12-01

Laser transmission welding (LTW) of thermoplastics is a direct bonding technique already used in different industrial applications sectors such as automobiles, microfluidics, electronics, and biomedicine. LTW evolves localized heating at the interface of two pieces of plastic to be joined. One of the plastic pieces needs to be optically transparent to the laser radiation whereas the other part has to be absorbent, being that the radiation produced by high power diode lasers is a good alternative for this process. As consequence, a tailored laser system has been designed and developed to obtain high quality weld seams with weld widths between 0.7 and 1.4 mm. The developed laser system consists of two diode laser bars (50 W per bar) coupled into an optical fiber using a nonimaging solution: equalization of the beam parameter product (BPP) in the slow and fast axes by a pair of step-mirrors. The power scaling was carried out by means of a multiplexing polarization technique. The analysis of energy balance and beam quality was performed considering ray tracing simulation (ZEMAX) and experimental validation. The welding experiments were conducted on acrylonitrile/butadiene/styrene (ABS), a thermoplastic frequently used in automotive, electronics and aircraft applications, doped with two different concentrations of carbon nanotubes (0.01% and 0.05% CNTs). Quality of the weld seams on ABS was analyzed in terms of the process parameters (welding speed, laser power and clamping pressure) by visual and optical microscope inspections. Mechanical properties of weld seams were analyzed by mechanical shear tests. High quality weld seams were produced in ABS, revealing the potential of the laser developed in this work for a wide range of plastic welding applications.

Prevention and control of food safety risks: the role of governments, food producers, marketers, and academia.

PubMed

Lupien, John R

2007-01-01

Food systems are rapidly changing as world population grows, increasing urbanization occurs, consumer tastes and preferences change and differ in various countries and cultures, large scale food production increases, and food imports and exports grow in volume and value. Consumers in all countries have become more insistent that foods available in the marketplace are of good quality and safe, and do not pose risks to them and their families. Publicity about food risk problems and related risks, including chemical and microbiological contamination of foods, mad-cow disease, avian flu, industrial chemical contamination all have made consumers and policy makers more aware of the need of the control of food safety risk factors in all countries. To discuss changes in food systems, and in consumer expectations, that have placed additional stress on the need for better control of food safety risks. Food producers, processors, and marketers have additional food law and regulations to meet; government agencies must increase monitoring and enforcement of adequate food quality and safety legislation and coordinate efforts between agriculture, health, trade, justice and customs agencies; and academia must take action to strengthen the education of competent food legislation administrators, inspectorate, and laboratory personnel for work in government and industry, including related food and food safety research . Both Government and the food industry must assure that adequate control programs are in place to control the quality and safety of all foods, raw or processed, throughout the food chain from production to final consumption. This includes appropriate laboratory facilities to perform necessary analysis of foods for risk and quality factors, and to carry out a wide range of food science, toxicological and related research.

Kinetics model development of cocoa bean fermentation

NASA Astrophysics Data System (ADS)

Kresnowati, M. T. A. P.; Gunawan, Agus Yodi; Muliyadini, Winny

2015-12-01

Although Indonesia is one of the biggest cocoa beans producers in the world, Indonesian cocoa beans are oftenly of low quality and thereby frequently priced low in the world market. In order to improve the quality, adequate post-harvest cocoa processing techniques are required. Fermentation is the vital stage in series of cocoa beans post harvest processing which could improve the quality of cocoa beans, in particular taste, aroma, and colours. During the fermentation process, combination of microbes grow producing metabolites that serve as the precursors for cocoa beans flavour. Microbial composition and thereby their activities will affect the fermentation performance and influence the properties of cocoa beans. The correlation could be reviewed using a kinetic model that includes unstructured microbial growth, substrate utilization and metabolic product formation. The developed kinetic model could be further used to design cocoa bean fermentation process to meet the expected quality. Further the development of kinetic model of cocoa bean fermentation also serve as a good case study of mixed culture solid state fermentation, that has rarely been studied. This paper presents the development of a kinetic model for solid-state cocoa beans fermentation using an empirical approach. Series of lab scale cocoa bean fermentations, either natural fermentations without starter addition or fermentations with mixed yeast and lactic acid bacteria starter addition, were used for model parameters estimation. The results showed that cocoa beans fermentation can be modelled mathematically and the best model included substrate utilization, microbial growth, metabolites production and its transport. Although the developed model still can not explain the dynamics in microbial population, this model can sufficiently explained the observed changes in sugar concentration as well as metabolic products in the cocoa bean pulp.

van der Waals epitaxial two-dimensional CdSxSe(1-x) semiconductor alloys with tunable-composition and application to flexible optoelectronics.

PubMed

Xia, Jing; Zhao, Yun-Xuan; Wang, Lei; Li, Xuan-Ze; Gu, Yi-Yi; Cheng, Hua-Qiu; Meng, Xiang-Min

2017-09-21

Despite the substantial progress in the development of two-dimensional (2D) materials from conventional layered crystals, it still remains particularly challenging to produce high-quality 2D non-layered semiconductor alloys which may bring in some unique properties and new functions. In this work, the synthesis of well-oriented 2D non-layered CdS x Se (1-x) semiconductor alloy flakes with tunable compositions and optical properties is established. Structural analysis reveals that the 2D non-layered alloys follow an incommensurate van der Waals epitaxial growth pattern. Photoluminescence measurements show that the 2D alloys have composition-dependent direct bandgaps with the emission peak varying from 1.8 eV to 2.3 eV, coinciding well with the density functional theory calculations. Furthermore, photodetectors based on the CdS x Se (1-x) flakes exhibit a high photoresponsivity of 703 A W -1 with an external quantum efficiency of 1.94 × 10 3 and a response time of 39 ms. Flexible devices fabricated on a thin mica substrate display good mechanical stability upon repeated bending. This work suggests a facile and general method to produce high-quality 2D non-layered semiconductor alloys for next-generation optoelectronic devices.