76 FR 72215 - Certain Products Containing Interactive Program Guide and Parental Controls Technology; Receipt...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... Parental Controls Technology; Receipt of Complaint; Solicitation of Comments Relating to the Public... Containing Interactive Program Guide and Parental Controls Technology, DN 2856; the Commission is soliciting... parental controls technology. The complaint names Vizio, Inc. of Irvine, CA; Haier Group Corp. of China...

Tank waste remediation system privatization infrastructure program, configuration management implementation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaus, P.S.

This Configuration Management Implementation Plan (CMIP) was developed to assist in managing systems, structures, and components (SSCS), to facilitate the effective control and statusing of changes to SSCS, and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Privatization Infrastructure will take in implementing a configuration management program, to identify the Program`s products that need configuration management control, to determine the rigor of control, and to identify the mechanisms for that control.

Consideration in selecting crops for the human-rated life support system: a Linear Programming model

NASA Technical Reports Server (NTRS)

Wheeler, E. F.; Kossowski, J.; Goto, E.; Langhans, R. W.; White, G.; Albright, L. D.; Wilcox, D.; Henninger, D. L. (Principal Investigator)

1996-01-01

A Linear Programming model has been constructed which aids in selecting appropriate crops for CELSS (Controlled Environment Life Support System) food production. A team of Controlled Environment Agriculture (CEA) faculty, staff, graduate students and invited experts representing more than a dozen disciplines, provided a wide range of expertise in developing the model and the crop production program. The model incorporates nutritional content and controlled-environment based production yields of carefully chosen crops into a framework where a crop mix can be constructed to suit the astronauts' needs. The crew's nutritional requirements can be adequately satisfied with only a few crops (assuming vitamin mineral supplements are provided) but this will not be satisfactory from a culinary standpoint. This model is flexible enough that taste and variety driven food choices can be built into the model.

Consideration in selecting crops for the human-rated life support system: a linear programming model

NASA Astrophysics Data System (ADS)

Wheeler, E. F.; Kossowski, J.; Goto, E.; Langhans, R. W.; White, G.; Albright, L. D.; Wilcox, D.

A Linear Programming model has been constructed which aids in selecting appropriate crops for CELSS (Controlled Environment Life Support System) food production. A team of Controlled Environment Agriculture (CEA) faculty, staff, graduate students and invited experts representing more than a dozen disciplines, provided a wide range of expertise in developing the model and the crop production program. The model incorporates nutritional content and controlled-environment based production yields of carefully chosen crops into a framework where a crop mix can be constructed to suit the astronauts' needs. The crew's nutritional requirements can be adequately satisfied with only a few crops (assuming vitamin mineral supplements are provided) but this will not be satisfactory from a culinary standpoint. This model is flexible enough that taste and variety driven food choices can be built into the model.

Comparative Effects of Different Balance-Training–Progression Styles on Postural Control and Ankle Force Production: A Randomized Controlled Trial

PubMed Central

Cuğ, Mutlu; Duncan, Ashley; Wikstrom, Erik

2016-01-01

Context:  Despite the effectiveness of balance training, the exact parameters needed to maximize the benefits of such programs remain unknown. One such factor is how individuals should progress to higher levels of task difficulty within a balance-training program. Yet no investigators have directly compared different balance-training–progression styles. Objective:  To compare an error-based progression (ie, advance when proficient at a task) with a repetition-based progression (ie, advance after a set amount of repetitions) style during a balance-training program in healthy individuals. Design:  Randomized controlled trial. Setting:  Research laboratory. Patients or Other Participants:  A total of 28 (16 women, 12 men) physically healthy young adults (age = 21.57 ± 3.95 years, height = 171.60 ± 11.03 cm, weight = 72.96 ± 16.18 kg, body mass index = 24.53 ± 3.7). Intervention(s):  All participants completed 12 supervised balance-training sessions over 4 weeks. Each session consisted of a combination of dynamic unstable-surface tasks that incorporated a BOSU ball and lasted about 30 minutes. Main Outcome Measure(s):  Static balance from an instrumented force plate, dynamic balance as measured via the Star Excursion Balance Test, and ankle force production in all 4 cardinal planes of motion as measured with a handheld dynamometer before and after the intervention. Results:  Selected static postural-control outcomes, dynamic postural control, and ankle force production in all planes of motion improved (P < .05). However, no differences between the progression styles were observed (P > .05) for any of the outcome measures. Conclusions:  A 4-week balance-training program consisting of dynamic unstable-surface exercises on a BOSU ball improved dynamic postural control and ankle force production in healthy young adults. These results suggest that an error-based balance-training program is comparable with but not superior to a repetition-based balance-training program in improving postural control and ankle force production in healthy young adults. PMID:26878257

Management of Occupational Exposure to Engineered Nanoparticles Through a Chance-Constrained Nonlinear Programming Approach

PubMed Central

Chen, Zhi; Yuan, Yuan; Zhang, Shu-Shen; Chen, Yu; Yang, Feng-Lin

2013-01-01

Critical environmental and human health concerns are associated with the rapidly growing fields of nanotechnology and manufactured nanomaterials (MNMs). The main risk arises from occupational exposure via chronic inhalation of nanoparticles. This research presents a chance-constrained nonlinear programming (CCNLP) optimization approach, which is developed to maximize the nanaomaterial production and minimize the risks of workplace exposure to MNMs. The CCNLP method integrates nonlinear programming (NLP) and chance-constrained programming (CCP), and handles uncertainties associated with both the nanomaterial production and workplace exposure control. The CCNLP method was examined through a single-walled carbon nanotube (SWNT) manufacturing process. The study results provide optimal production strategies and alternatives. It reveal that a high control measure guarantees that environmental health and safety (EHS) standards regulations are met, while a lower control level leads to increased risk of violating EHS regulations. The CCNLP optimization approach is a decision support tool for the optimization of the increasing MNMS manufacturing with workplace safety constraints under uncertainties. PMID:23531490

Management of occupational exposure to engineered nanoparticles through a chance-constrained nonlinear programming approach.

PubMed

Chen, Zhi; Yuan, Yuan; Zhang, Shu-Shen; Chen, Yu; Yang, Feng-Lin

2013-03-26

Critical environmental and human health concerns are associated with the rapidly growing fields of nanotechnology and manufactured nanomaterials (MNMs). The main risk arises from occupational exposure via chronic inhalation of nanoparticles. This research presents a chance-constrained nonlinear programming (CCNLP) optimization approach, which is developed to maximize the nanaomaterial production and minimize the risks of workplace exposure to MNMs. The CCNLP method integrates nonlinear programming (NLP) and chance-constrained programming (CCP), and handles uncertainties associated with both the nanomaterial production and workplace exposure control. The CCNLP method was examined through a single-walled carbon nanotube (SWNT) manufacturing process. The study results provide optimal production strategies and alternatives. It reveal that a high control measure guarantees that environmental health and safety (EHS) standards regulations are met, while a lower control level leads to increased risk of violating EHS regulations. The CCNLP optimization approach is a decision support tool for the optimization of the increasing MNMS manufacturing with workplace safety constraints under uncertainties.

Self-paced exercise program for office workers: impact on productivity and health outcomes.

PubMed

Low, David; Gramlich, Martha; Engram, Barbara Wright

2007-03-01

The impact of a self-paced exercise program on productivity and health outcomes of 32 adult workers in a large federal office complex was investigated during 3 months. Walking was the sole form of exercise. The first month, during which no walking occurred, was the control period. The second and third months were the experimental period. Participants were divided into three levels based on initial weight and self-determined walking distance goals. Productivity (using the Endicott Work Productivity Scale), walking distance (using a pedometer), and health outcomes (blood pressure, weight, pulse rate, and body fat percentage) were measured weekly. Results from this study, based on a paired t test analysis, suggest that although the self-paced exercise program had no impact on productivity, it lowered blood pressure and promoted weight loss. Further study using a larger sample and a controlled experimental design is recommended to provide conclusive evidence.

Can Chronic Disease Management Programs for Patients with Type 2 Diabetes Reduce Productivity-Related Indirect Costs of the Disease? Evidence from a Randomized Controlled Trial

PubMed Central

Bolin, Jane N.; Ohsfeldt, Robert L.; Phillips, Charles D.; Zhao, Hongwei; Ory, Marcia G.; Forjuoh, Samuel N.

2014-01-01

Abstract The objective was to assess the impacts of diabetes self-management programs on productivity-related indirect costs of the disease. Using an employer's perspective, this study estimated the productivity losses associated with: (1) employee absence on the job, (2) diabetes-related disability, (3) employee presence on the job, and (4) early mortality. Data were obtained from electronic medical records and survey responses of 376 adults aged ≥18 years who were enrolled in a randomized controlled trial of type 2 diabetes self-management programs. All study participants had uncontrolled diabetes and were randomized into one of 4 study arms: personal digital assistant (PDA), chronic disease self-management program (CDSMP), combined PDA and CDSMP, and usual care (UC). The human-capital approach was used to estimate lost productivity resulting from 1, 2, 3, and 4 above, which are summed to obtain total productivity loss. Using robust regression, total productivity loss was modeled as a function of the diabetes self-management programs and other identified demographic and clinical characteristics. Compared to subjects in the UC arm, there were no statistically significant differences in productivity losses among persons undergoing any of the 3 diabetes management interventions. Males were associated with higher productivity losses (+$708/year; P<0.001) and persons with greater than high school education were associated with additional productivity losses (+$758/year; P<0.001). Persons with more than 1 comorbid condition were marginally associated with lower productivity losses (-$326/year; P=0.055). No evidence was found that the chronic disease management programs examined in this trial affect indirect productivity losses. (Population Health Management 2014;17:112–120) PMID:24152055

Can chronic disease management programs for patients with type 2 diabetes reduce productivity-related indirect costs of the disease? Evidence from a randomized controlled trial.

PubMed

Adepoju, Omolola E; Bolin, Jane N; Ohsfeldt, Robert L; Phillips, Charles D; Zhao, Hongwei; Ory, Marcia G; Forjuoh, Samuel N

2014-04-01

The objective was to assess the impacts of diabetes self-management programs on productivity-related indirect costs of the disease. Using an employer's perspective, this study estimated the productivity losses associated with: (1) employee absence on the job, (2) diabetes-related disability, (3) employee presence on the job, and (4) early mortality. Data were obtained from electronic medical records and survey responses of 376 adults aged ≥18 years who were enrolled in a randomized controlled trial of type 2 diabetes self-management programs. All study participants had uncontrolled diabetes and were randomized into one of 4 study arms: personal digital assistant (PDA), chronic disease self-management program (CDSMP), combined PDA and CDSMP, and usual care (UC). The human-capital approach was used to estimate lost productivity resulting from 1, 2, 3, and 4 above, which are summed to obtain total productivity loss. Using robust regression, total productivity loss was modeled as a function of the diabetes self-management programs and other identified demographic and clinical characteristics. Compared to subjects in the UC arm, there were no statistically significant differences in productivity losses among persons undergoing any of the 3 diabetes management interventions. Males were associated with higher productivity losses (+$708/year; P<0.001) and persons with greater than high school education were associated with additional productivity losses (+$758/year; P<0.001). Persons with more than 1 comorbid condition were marginally associated with lower productivity losses (-$326/year; P=0.055). No evidence was found that the chronic disease management programs examined in this trial affect indirect productivity losses.

BAGHOUSE FILTRATION PRODUCTS VERIFICATION TESTING, HOW IT BENEFITS THE BOILER BAGHOUSE OPERATOR

EPA Science Inventory

The paper describes the Environmental Technology Verification (ETV) Program for baghouse filtration products developed by the Air Pollution Control Technology Verification Center, one of six Centers under the ETV Program, and discusses how it benefits boiler baghouse operators. A...

76 FR 13973 - United States Warehouse Act; Processed Agricultural Products Licensing Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

... license for the processed agricultural products that are stored in climate controlled, cooler, and freezer..., and dry beans. Warehouse operators voluntarily agree to be licensed, observe the rules for licensing... program for processed agricultural products that are stored in climate controlled, cooler, and freezer...

Impact of a health promotion program on employee health risks and work productivity.

PubMed

Mills, Peter R; Kessler, Ronald C; Cooper, John; Sullivan, Sean

2007-01-01

Evaluate the impact of a multicomponent workplace health promotion program on employee health risks and work productivity. Quasi-experimental 12-month before-after intervention-control study. A multinational corporation headquartered in the United Kingdom. Of 618 employees offered the program, 266 (43%) completed questionnaires before and after the program. A total of 1242 of 2500 (49.7%) of a control population also completed questionnaires 12 months apart. A multicomponent health promotion program incorporating a health risk appraisal questionnaire, access to a tailored health improvement web portal, wellness literature, and seminars and workshops focused upon identified wellness issues. Outcomes were (1) cumulative count of health risk factors and the World Health Organization health and work performance questionnaire measures of (2) workplace absenteeism and (3) work performance. After adjusting for baseline differences, improvements in all three outcomes were significantly greater in the intervention group compared with the control group. Mean excess reductions of 0.45 health risk factors and 0.36 monthly absenteeism days and a mean increase of 0.79 on the work performance scale were observed in the intervention group compared with the control group. The intervention yielded a positive return on investment, even using conservative assumptions about effect size estimation. The results suggest that a well-implemented multicomponent workplace health promotion program can produce sizeable changes in health risks and productivity.

A Comprehensive Approach to Management of Workplace and Environmental Noise at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Cooper, Beth A.

1995-01-01

NASA Lewis Research Center is home to more than 100 experimental research testing facilities and laboratories, including large wind tunnels and engine test cells, which in combination create a varied and complex noise environment. Much of the equipment was manufactured prior to the enactment of legislation limiting product noise emissions or occupational noise exposure. Routine facility maintenance and associated construction also contributes to a noise exposure management responsibility which is equal in magnitude and scope to that of several small industrial companies. The Noise Program, centrally managed within the Office of Environmental Programs at LRC, maintains overall responsibility for hearing conservation, community noise control, and acoustical and noise control engineering. Centralized management of the LRC Noise Program facilitates the timely development and implementation of engineered noise control solutions for problems identified via either the Hearing Conservation of Community Noise Program. The key element of the Lewis Research Center Noise Program, Acoustical and Noise Control Engineering Services, is focused on developing solutions that permanently reduce employee and community noise exposure and maximize research productivity by reducing or eliminating administrative and operational controls and by improving the safety and comfort of the work environment. The Hearing Conservation Program provides noise exposure assessment, medical monitoring, and training for civil servant and contractor employees. The Community Noise Program aims to maintain the support of LRC's neighboring communities while enabling necessary research operations to accomplish their programmatic goals. Noise control engineering capability resides within the Noise Program. The noise control engineering, based on specific exposure limits, is a fundamental consideration throughout the design phase of new test facilities, labs, and office buildings. In summary, the Noise Program addresses hearing conservation, community noise control, and acoustical and noise control engineering.

77 FR 4981 - Submission for OMB Review; Comment Request; Republication

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-01

... Eggs. OMB Control Number: 0581-0113. Summary of Collection: Congress enacted the Egg Products Inspection Act (21 U.S.C. 1031-1056) (EPIA) to provide a mandatory inspection program to assure egg products... control the disposition of dirty and checked shell eggs; to control unwholesome, adulterated, and inedible...

40 CFR 82.12 - Transfers of allowances for class I controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls...) Until January 1, 1996, for all class I controlled substances, except for Group VI, and until January 1... amount of the transferor's consumption allowances or production allowances, and effective January 1, 1995...

Publications of the NASA Controlled Ecological Life Support Systems (CELSS) Program 1984-86

NASA Technical Reports Server (NTRS)

1987-01-01

Publications of research sponsored by the NASA CELSS (Controlled Ecological Life Support Systems) Program are listed, along with publications of interest to the Program. The bibliography is divided into the three major divisions of CELSS research: (1) Food Production; (2) Waste Management; and (3) Systems Management and Control. This bibliography is an update of NASA CR-3911 and includes references from 1984 through 1986.

Incorporating biological control into IPM decision making

USDA-ARS?s Scientific Manuscript database

Of the many ways biological control can be incorporated into Integrated Pest Management (IPM) programs, natural enemy thresholds are arguably most easily adopted by stakeholders. Integration of natural enemy thresholds into IPM programs requires ecological and cost/benefit crop production data, thr...

Propulsion system-flight control integration-flight evaluation and technology transition

NASA Technical Reports Server (NTRS)

Burcham, Frank W., Jr.; Gilyard, Glenn B.; Myers, Lawrence P.

1990-01-01

Integration of propulsion and flight control systems and their optimization offering significant performance improvement are assessed. In particular, research programs conducted by NASA on flight control systems and propulsion system-flight control interactions on the YF-12 and F-15 aircraft are addressed; these programs have demonstrated increased thrust, reduced fuel consumption, increased engine life, and improved aircraft performance. Focus is placed on altitude control, speed-Mach control, integrated controller design, as well as flight control systems and digital electronic engine control. A highly integrated digital electronic control program is analyzed and compared with a performance seeking control program. It is shown that the flight evaluation and demonstration of these technologies have been a key part in the transition of the concepts to production and operational use on a timely basis.

7 CFR 4288.25 - Succession and control of facilities and production.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 15 2012-01-01 2012-01-01 false Succession and control of facilities and production... Repowering Assistance Payments to Eligible Biorefineries § 4288.25 Succession and control of facilities and... that, the party is eligible, and permitting such succession would serve the purposes of the program. If...

7 CFR 4288.25 - Succession and control of facilities and production.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Succession and control of facilities and production... Repowering Assistance Payments to Eligible Biorefineries § 4288.25 Succession and control of facilities and... that, the party is eligible, and permitting such succession would serve the purposes of the program. If...

7 CFR 4288.25 - Succession and control of facilities and production.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 15 2014-01-01 2014-01-01 false Succession and control of facilities and production... Repowering Assistance Payments to Eligible Biorefineries § 4288.25 Succession and control of facilities and... that, the party is eligible, and permitting such succession would serve the purposes of the program. If...

Articulatory Control in Childhood Apraxia of Speech in a Novel Word-Learning Task

ERIC Educational Resources Information Center

Case, Julie; Grigos, Maria I.

2016-01-01

Purpose: Articulatory control and speech production accuracy were examined in children with childhood apraxia of speech (CAS) and typically developing (TD) controls within a novel word-learning task to better understand the influence of planning and programming deficits in the production of unfamiliar words. Method: Participants included 16…

22 CFR 62.71 - Control and production of the electronic Form DS-2019.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Control and production of the electronic Form DS-2019. 62.71 Section 62.71 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES EXCHANGE VISITOR PROGRAM Student and Exchange Visitor Information System (SEVIS) § 62.71 Control and...

77 FR 3559 - Energy Conservation Program for Consumer Products: Test Procedures for Refrigerators...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

..., which is typical of an approach enabled by more sophisticated electronic controls. Id. The interim final... and long- time automatic defrost or variable defrost control and adjust the default values of maximum... accurate measurement of the energy use of products with variable defrost control. DATES: The amendments are...

[Design of a Hazard Analysis and Critical Control Points (HACCP) plan to assure the safety of a bologna product produced by a meat processing plant].

PubMed

Bou Rached, Lizet; Ascanio, Norelis; Hernández, Pilar

2004-03-01

The Hazard Analysis and Critical Control Point (HACCP) is a systematic integral program used to identify and estimate the hazards (microbiological, chemical and physical) and the risks generated during the primary production, processing, storage, distribution, expense and consumption of foods. To establish a program of HACCP has advantages, being some of them: to emphasize more in the prevention than in the detection, to diminish the costs, to minimize the risk of manufacturing faulty products, to allow bigger trust to the management, to strengthen the national and international competitiveness, among others. The present work is a proposal based on the design of an HACCP program to guarantee the safety of the Bologna Special Type elaborated by a meat products industry, through the determination of hazards (microbiological, chemical or physical), the identification of critical control points (CCP), the establishment of critical limits, plan corrective actions and the establishment of documentation and verification procedures. The used methodology was based in the application of the seven basic principles settled down by the Codex Alimentarius, obtaining the design of this program. In view of the fact that recently the meat products are linked with pathogens like E. coli O157:H7 and Listeria monocytogenes, these were contemplated as microbiological hazard for the establishment of the HACCP plan whose application will guarantee the obtaining of a safe product.

Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

NASA Technical Reports Server (NTRS)

Isenberg, J. M.; Southall, J. W.

1979-01-01

The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

Sand Fly Surveillance and Control on Camp Ramadi, Iraq, as Part of a Leishmaniasis Control Program

DTIC Science & Technology

2013-12-01

Environmental Science, Research Triangle Park, NC, U.S.A.) and Anvil® 10+10 ULV (Clarke Mosquito Control Products, Roselle , IL, U.S.A). Scourge® was...contract personnel using a Clarke Pro-Mist ULV machine (Clarke Mosquito Control Products, Roselle , IL): April (n=2), May (n=6), June (n=6), July

9 CFR 106.1 - Biological products; exemption.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological products... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Biological products; exemption. 106.1...

9 CFR 106.1 - Biological products; exemption.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological products... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Biological products; exemption. 106.1...

9 CFR 106.1 - Biological products; exemption.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological products... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Biological products; exemption. 106.1...

9 CFR 106.1 - Biological products; exemption.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological products... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Biological products; exemption. 106.1...

9 CFR 106.1 - Biological products; exemption.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological products... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Biological products; exemption. 106.1...

Fetal programming alters reactive oxygen species production in sheep cardiac mitochondria.

PubMed

von Bergen, Nicholas H; Koppenhafer, Stacia L; Spitz, Douglas R; Volk, Kenneth A; Patel, Sonali S; Roghair, Robert D; Lamb, Fred S; Segar, Jeffrey L; Scholz, Thomas D

2009-04-01

Exposure to an adverse intrauterine environment is recognized as an important risk factor for the development of cardiovascular disease later in life. Although oxidative stress has been proposed as a mechanism for the fetal programming phenotype, the role of mitochondrial O(2)(*-) (superoxide radical) production has not been explored. To determine whether mitochondrial ROS (reactive oxygen species) production is altered by in utero programming, pregnant ewes were given a 48-h dexamethasone (dexamethasone-exposed, 0.28 mg.kg(-1) of body weight.day(-1)) or saline (control) infusion at 27-28 days gestation (term=145 days). Intact left ventricular mitochondria and freeze-thaw mitochondrial membranes were studied from offspring at 4-months of age. AmplexRed was used to measure H(2)O(2) production. Activities of the antioxidant enzymes Mn-SOD (manganese superoxide dismutase), GPx (glutathione peroxidase) and catalase were measured. Compared with controls, a significant increase in Complex I H(2)O(2) production was found in intact mitochondria from dexamethasone-exposed animals. The treatment differences in Complex I-driven H(2)O(2) production were not seen in mitochondrial membranes. Consistent changes in H(2)O(2) production from Complex III in programmed animals were not found. Despite the increase in H(2)O(2) production in intact mitochondria from programmed animals, dexamethasone exposure significantly increased mitochondrial catalase activity, whereas Mn-SOD and GPx activities were unchanged. The results of the present study point to an increase in the rate of release of H(2)O(2) from programmed mitochondria despite an increase in catalase activity. Greater mitochondrial H(2)O(2) release into the cell may play a role in the development of adult disease following exposure to an adverse intrauterine environment.

Publications of the NASA Controlled Ecological Life Support System (CELSS) Program, 1979-1989

NASA Technical Reports Server (NTRS)

Wallace, Janice S.; Powers, Janet V.

1990-01-01

Publications of research sponsored by the NASA Controlled Ecological Life Support System (CELSS) Program from 1979 to 1989 are listed. The CELSS Program encompasses research and technology with the goal of developing an autonomous bioregenerative life support system that continually recycles the solid, liquid, and gaseous materials essential for human life. The bibliography is divided into four major subject areas: food production, nutritional requirements, waste management, and systems management and control.

Computer Programs For Automated Welding System

NASA Technical Reports Server (NTRS)

Agapakis, John E.

1993-01-01

Computer programs developed for use in controlling automated welding system described in MFS-28578. Together with control computer, computer input and output devices and control sensors and actuators, provide flexible capability for planning and implementation of schemes for automated welding of specific workpieces. Developed according to macro- and task-level programming schemes, which increases productivity and consistency by reducing amount of "teaching" of system by technician. System provides for three-dimensional mathematical modeling of workpieces, work cells, robots, and positioners.

Economic Evaluation of a Worksite Obesity Prevention and Intervention Trial among Hotel Workers in Hawaii

PubMed Central

Meenan, Richard T.; Vogt, Thomas M.; Williams, Andrew E.; Stevens, Victor J.; Albright, Cheryl L.; Nigg, Claudio

2010-01-01

Objective Economic evaluation of Work, Weight, and Wellness (3W), a two-year randomized trial of a weight loss program delivered through Hawaii hotel worksites. Methods Business case analysis from hotel perspective. Program resources were micro-costed (2008 dollars). Program benefits were reduced medical costs, fewer absences, and higher productivity. Primary outcome was discounted 24-month net present value (NPV). Results Control program cost $222K to implement over 24 months ($61 per participant), intervention program cost $1.12M ($334). Including overweight participants (body mass index > 25), discounted control NPV was −$217K; −$1.1M for intervention program. Presenteeism improvement of 50% combined with baseline 10% productivity shortfall required to generate positive 24-month intervention NPV. Conclusions 3W’s positive clinical outcomes did not translate into immediate economic benefit for participating hotels, although modest cost savings were observed in the trial’s second year. PMID:20061889

Preharvest food safety.

PubMed

Childers, A B; Walsh, B

1996-07-23

Preharvest food safety is essential for the protection of our food supply. The production and transport of livestock and poultry play an integral part in the safety of these food products. The goals of this safety assurance include freedom from pathogenic microorganisms, disease, and parasites, and from potentially harmful residues and physical hazards. Its functions should be based on hazard analysis and critical control points from producer to slaughter plant with emphasis on prevention of identifiable hazards rather than on removal of contaminated products. The production goal is to minimize infection and insure freedom from potentially harmful residues and physical hazards. The marketing goal is control of exposure to pathogens and stress. Both groups should have functional hazard analysis and critical control points management programs which include personnel training and certification of producers. These programs must cover production procedures, chemical usage, feeding, treatment practices, drug usage, assembly and transportation, and animal identification. Plans must use risk assessment principles, and the procedures must be defined. Other elements would include preslaughter certification, environmental protection, control of chemical hazards, live-animal drug-testing procedures, and identification of physical hazards.

40 CFR 158.400 - Product performance data requirements table.

Code of Federal Regulations, 2014 CFR

2014-07-01

... product bears a claim to control pest microorganisms that pose a threat to human health and whose presence...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Performance § 158.400 Product performance data... the product performance data requirements for a particular pesticide product. Notes that apply to an...

40 CFR 158.400 - Product performance data requirements table.

Code of Federal Regulations, 2013 CFR

2013-07-01

... product bears a claim to control pest microorganisms that pose a threat to human health and whose presence...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Performance § 158.400 Product performance data... the product performance data requirements for a particular pesticide product. Notes that apply to an...

Audit Report on "The Department's Management of the ENERGY STAR Program"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-10-01

The American Recovery and Reinvestment Act (Recovery Act) authorized about $300 million in consumer rebate incentives for purchases of products rated under the 'ENERGY STAR' Program. ENERGY STAR, a voluntary labeling program established in 1992, provides consumers with energy efficiency data for a range of products so that they can make informed purchase judgments. The overall goal of the program is to encourage consumers to choose energy efficient products, advancing the nationwide goal of reducing energy consumption. The U.S. Environmental Protection Agency (EPA) managed the ENERGY STAR Program on a stand-alone basis until 1996 when it joined forces with themore » Department of Energy (Department). A Memorandum of Cooperation expanded the ENERGY STAR product categories, giving the Department responsibility for overseeing eight product categories such as windows, dishwashers, clothes washers, and refrigerators, while EPA retained responsibility for electronic product categories and heating, ventilating, and cooling equipment. Each agency is responsible for setting product efficiency specifications for those items under its control and for ensuring the proper use of the ENERGY STAR label in the marketplace. In August 2007, the EPA Office of Inspector General issued an audit report identifying significant control weaknesses in EPA's management of ENERGY STAR. The Department, concerned by the findings at EPA and eager to improve its own program, developed an approach to verify adherence to product specifications, ensure proper use of the ENERGY STAR label in the marketplace, and improve the establishment of product specifications. As evidenced by the commitment of $300 million in Recovery Act funds, the ENERGY STAR Program plays an important role in the U.S. efforts to reduce energy consumption. We initiated this audit to determine whether the Department had implemented the actions it announced in 2007 to strengthen the Program. The Department had not implemented planned improvements in the ENERGY STAR Program. Our audit revealed that officials had not: (1) Developed a formal quality assurance program to help ensure that product specifications were adhered to; (2) Effectively monitored the use of the ENERGY STAR label to ensure that only qualifying products were labeled as compliant; and (3) Formalized procedures for establishing and revising product specifications and for documenting decisions regarding those specifications. In our judgment, the delay in the Department's planned improvements in its management of the ENERGY STAR Program could reduce consumer confidence in the integrity of the ENERGY STAR label. Such loss of credibility could reduce energy savings, increase consumer risk, and diminish the value of the recent infusion of $300 million for ENERGY STAR rebates under the Recovery Act.« less

Habilitation of the Severely and Profoundly Retarded: Volume III. Reports from the Specialized Training Program.

ERIC Educational Resources Information Center

Horner, Robert H., Ed.; Bellamy, G. Thomas, Ed.

Sixteen papers concerned with vocational habilitation of the severely and profoundly retarded are organized into three parts: issues in habilitation, stimulus control of vocational behavior, and instrumentation for program evaluation. Papers have the following titles and authors: "Structured Employment: Productivity and Productive Capacity" (R.…

Guidance to employers on integrating e-cigarettes/electronic nicotine delivery systems into tobacco worksite policy.

PubMed

Whitsel, Laurie P; Benowitz, Neal; Bhatnagar, Aruni; Bullen, Chris; Goldstein, Fred; Matthias-Gray, Lena; Grossmeier, Jessica; Harris, John; Isaac, Fikry; Loeppke, Ron; Manley, Marc; Moseley, Karen; Niemiec, Ted; OʼBrien, Vince; Palma-Davis, LaVaughn; Pronk, Nico; Pshock, Jim; Stave, Gregg M; Terry, Paul

2015-03-01

In recent years, new products have entered the marketplace that complicate decisions about tobacco control policies and prevention in the workplace. These products, called electronic cigarettes (e-cigarettes) or electronic nicotine delivery systems, most often deliver nicotine as an aerosol for inhalation, without combustion of tobacco. This new mode of nicotine delivery raises several questions about the safety of the product for the user, the effects of secondhand exposure, how the public use of these products should be handled within tobacco-free and smoke-free air policies, and how their use affects tobacco cessation programs, wellness incentives, and other initiatives to prevent and control tobacco use. In this article, we provide a background on e-cigarettes and then outline key policy recommendations for employers on how the use of these new devices should be managed within worksite tobacco prevention programs and control policies.

Promising More Information

NASA Technical Reports Server (NTRS)

2003-01-01

When NASA needed a real-time, online database system capable of tracking documentation changes in its propulsion test facilities, engineers at Stennis Space Center joined with ECT International, of Brookfield, Wisconsin, to create a solution. Through NASA's Dual-Use Program, ECT developed Exdata, a software program that works within the company's existing Promise software. Exdata not only satisfied NASA s requirements, but also expanded ECT s commercial product line. Promise, ECT s primary product, is an intelligent software program with specialized functions for designing and documenting electrical control systems. An addon to AutoCAD software, Promis e generates control system schematics, panel layouts, bills of material, wire lists, and terminal plans. The drawing functions include symbol libraries, macros, and automatic line breaking. Primary Promise customers include manufacturing companies, utilities, and other organizations with complex processes to control.

Government-to-private sector energy programs: Identification of common elements leading to successful implementation

NASA Astrophysics Data System (ADS)

Stockton, Keith M.

This dissertation examines six distinct government energy programs implemented in the United States during the last three decades. A common element within these programs is an attempt by government to drive commercialization of energy technologies leading to changes in energy production or consumptive behavior. We seek to understand the factors that lead to success or failure of these programs with two goals in mind. The first is theoretical in that we test a hypothesis that market-based energy programs have substantially higher success rates than command-and-control programs. The second goal is operational in nature, in which we desire to identify common factors within energy programs that lead either to program success or to failure. We investigate and evaluate three market-based and three command-and-control energy programs. The market-based programs include the federal Corporate Average Fuel Economy and Sulfur Dioxide Emissions Control programs as well as Colorado's Amendment 37. The command-and-control programs include the federal Synthetic Fuels Corporation and Corn Based Ethanol programs as well as Colorado's Solar Electric Power program. We conduct the analysis of each program based on composite methodology derived from leading academics within the Policy Sciences. From our research findings, we conclude that both market-based and command-and-control programs can achieve their legislative goals and objectives, resulting in permanent changes in energy production or consumptive behavior. However, we also find that the economic efficiency is the differentiator between market-based and command-and-control programs. Market-based programs, because of the inherent flexibility, allow participants to react to changing economic and/or technical conditions. In contrast, command-and-control programs lack such flexibility and often result in economic inefficiency when economic conditions change. The financial incentives incorporated in the three command-and-control programs we examined also create market distortions that both limit the flexibility of private markets to adjust to changing economic conditions and discourage the adoption of competing technologies. We conclude our research by recommending that future policy makers maximize the range of methods availability to the private sector to meet legislative goals and limit the use of financial incentives. With these measures, energy programs may achieve higher levels of success by reaching their goals with maximum economic efficiency and minimal negative unanticipated consequences.

Statistical Process Control in the Practice of Program Evaluation.

ERIC Educational Resources Information Center

Posavac, Emil J.

1995-01-01

A technique developed to monitor the quality of manufactured products, statistical process control (SPC), incorporates several features that may prove attractive to evaluators. This paper reviews the history of SPC, suggests how the approach can enrich program evaluation, and illustrates its use in a hospital-based example. (SLD)

Corrosion Prevention and Control Planning Guidebook Spiral 3

DTIC Science & Technology

2007-09-01

programs. 5. Develop and recommend corrective and preventive procedures based on reliability and maintainability analyses of field data on similar in...One of the many challenges facing the Program/Acquisition Managers is the ability to develop a meaningful Corrosion Prevention and Control Plan...designated program manager of all activities associated with the acquisition, development , production, fielding , sustainment, and disposal of a DoD weapon

77 FR 1996 - National Organic Program (NOP); Sunset Review (2012)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... production at Sec. 205.601(g)(1) as follows: Sulfur dioxide--underground rodent control only (smoke bombs). The Environmental Protection Agency (EPA) registers smoke bomb products for underground rodent control...). Smoke bombs are placed into rodent burrows and detonated. The detonation process produces sulfur dioxide...

9 CFR 54.21 - Participation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Participation. 54.21 Section 54.21 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE COOPERATIVE CONTROL AND ERADICATION OF LIVESTOCK OR POULTRY DISEASES CONTROL OF SCRAPIE Scrapie Flock Certification Program § 54.21 Participation. Any...

Beyond Our Control: A Junior Achievement Television Program

ERIC Educational Resources Information Center

Williams, Dave

1971-01-01

Described is a program under which high school students share the responsibility of running a model television production company, from selling advertising to producing a weekly half hour television program. Special attention is given to the show they produce. (LS)

Expected value based fuzzy programming approach to solve integrated supplier selection and inventory control problem with fuzzy demand

NASA Astrophysics Data System (ADS)

Sutrisno; Widowati; Sunarsih; Kartono

2018-01-01

In this paper, a mathematical model in quadratic programming with fuzzy parameter is proposed to determine the optimal strategy for integrated inventory control and supplier selection problem with fuzzy demand. To solve the corresponding optimization problem, we use the expected value based fuzzy programming. Numerical examples are performed to evaluate the model. From the results, the optimal amount of each product that have to be purchased from each supplier for each time period and the optimal amount of each product that have to be stored in the inventory for each time period were determined with minimum total cost and the inventory level was sufficiently closed to the reference level.

CELSS research and development program

NASA Technical Reports Server (NTRS)

Bubenheim, David

1990-01-01

Research in Controlled Ecological Life Support Systems (CELSS) conducted by NASA indicate that plant based systems are feasible candidates for human support in space. Ames has responsibility for research and development, systems integration and control, and space flight experiment portions of the CELSS program. Important areas for development of new methods and technologies are biomass production, waste processing, water purification, air revitalization, and food processing. For the plant system, the approach was to identify the flexibility and response time for the food, water, and oxygen production, and carbon dioxide consumption processes. Tremendous increases in productivity, compared with terrestrial agriculture, were realized. Waste processing research emphasizes recycle (transformation) of human wastes, trash, and inedible biomass to forms usable as inputs to the plant production system. Efforts to improve efficiency of the plant system, select new CELSS crops for a balanced diet, and initiate closed system research with the Crop Growth Research Chambers continue. The System Control and Integration program goal is to insure orchestrated system operation of the biological, physical, and chemical operation of the biological, physical, and chemical component processors of the CELSS. Space flight studies are planned to verify adequate operation of the system in reduced gravity or microgravity environments.

Y-Linked markers for improved population control of the tephritid fruit fly pest, Anastrepha suspensa

USDA-ARS?s Scientific Manuscript database

Insect pest control programs incorporating the sterile insect technique (SIT) rely on the mass production and release of sterilized insects to reduce the wild-type population through infertile matings. Most effective programs release only males to avoid any crop damage caused by female fruit flies o...

Chemical Stockpile Disposal Program. Chemical Agent and Munition Disposal. Summary of the U.S. Army’s Experience

DTIC Science & Technology

1987-09-21

a difficult process to control; continuous generation of acidic products results in the possibility of side reactions and in gaseous by- products . Ion...dissolved in hydrochlorlo acid. The acid chlorination forms non-toxic reaction products as per Figure 3-3. (2) To initiate the neutralization process ...et al, "Emission and Control of By- Products From Hazarduus Waste Combustion Processes ", Land Disposal, Remedial Action, Incineration and Treatment

9 CFR 430.4 - Control of Listeria monocytogenes in post-lethality exposed ready-to-eat products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... products must control through its HACCP plan or prevent in the processing environment through a Sanitation...: (i) The post-lethality treatment must be included in the establishment's HACCP plan. The... the establishment's HACCP plan or its Sanitation SOP or other prerequisite program. (ii) The...

9 CFR 430.4 - Control of Listeria monocytogenes in post-lethality exposed ready-to-eat products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... products must control through its HACCP plan or prevent in the processing environment through a Sanitation...: (i) The post-lethality treatment must be included in the establishment's HACCP plan. The... the establishment's HACCP plan or its Sanitation SOP or other prerequisite program. (ii) The...

75 FR 34726 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of LG...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-18

... relative humidity sensors and adaptive control anti-sweat heaters. The rationale for granting these waivers is equally applicable to LG, which has products containing similar relative humidity sensors and anti... humidity sensors and adaptive control anti-sweat heaters. Therefore, it is ordered that: The application...

Environmental Assessment for the Space Based Infrared System (SBIRS) Mission Control Station for Defense Support Program Consolidation

DTIC Science & Technology

1996-04-01

use of products containing hazardous materials (e.g., cleaning products , spray and liquid solvents, toner cartridges, etc.). The total quantity of...products containing hazardous materials (e.g., cleaning products , spray and liquid solvents, toner cartridges, etc.). The total quantity of hazardous

Prescription for Health Care Costs. Wellness Programs on Campus.

ERIC Educational Resources Information Center

Dunlavey, Christopher S.

1992-01-01

The wellness program is applied within the higher education setting as one means to control health care costs. Discussed are the program's design, objectives, content, facilities, structure and staff, financing, and evaluation. It is noted that wellness programs are not only cost effective but can help to improve morale and increase productivity.…

Welding--Trade or Profession?

ERIC Educational Resources Information Center

Albright, C. E.; Smith, Kenneth

2006-01-01

This article discusses a collaborative program between schools with the purpose of training and providing advanced education in welding. Modern manufacturing is turning to automation to increase productivity, but it can be a great challenge to program robots and other computer-controlled welding and joining systems. Computer programming and…

Integration of a mechanical forebody vortex control system into the F-15

NASA Technical Reports Server (NTRS)

Boalbey, Richard E.; Citurs, Kevin D.; Ely, Wayne L.; Harbaugh, Stephen P.; Hollingsworth, William B.; Phillips, Ronald L.

1994-01-01

The goal of the F-15 Forebody Vortex Control (FVC) program is to develop a production FVC system for the F-15. The system may consist of either a mechanically actuated device such as the strakes developed for the HARV program, or a pneumatic device such as the port blowing system being tested on the X-29. Both types of systems are being evaluated under this program. Background information on the F-15 and a description and overview of forebody vortex controls (FVC) will be presented.

[Challenges and countermeasures of forestry schistosomiasis control programs in ecological priority of Yangtze River economic belt development].

PubMed

Ning, Su; Yong-Jie, Xu

2016-12-13

Relevant projects carried out within the Yangtze River economic belt on the impact of schistosomiasis epidemic and transmission are important issues for "ecological priority" in the process of implementing the strategy. The key problems of schistosomiasis epidemic risk, epidemic happening repeatedly, difficulty of rehabilitating Oncomelania hupensis snail control and schistosomiasis prevention forest, lag of evaluation system and platform construction, lack of basic research, et al. were analyzed in the Yangtze River economic belt taking "ecological priority" as the basis in this paper. Then corresponding countermeasures to these challenges were put forward so as to provide the reference for the national forestry schistosomiasis control programs, which include: execution of the comprehensive prevention and control strategy, scheming of the new round of forestry schistosomiasis control programs, strengthening schistosomiasis prevention and control, promoting productivity in existing forestry to consolidate and improve the achievements of previous forestry schistosomiasis control programs, and promoting the intensity of technological innovation to improve the technological level of forestry schistosomiasis control programs.

PLC based automatic control of pasteurize mix in ice cream production

NASA Astrophysics Data System (ADS)

Yao, Xudong; Liang, Kai

2013-03-01

This paper describes the automatic control device of pasteurized mix in the ice cream production process.We design a scheme of control system using FBD program language and develop the programmer in the STEP 7-Micro/WIN software, check for any bugs before downloading into PLC .These developed devices will able to provide flexibility and accuracy to control the step of pasteurized mix. The operator just Input the duration and temperature of pasteurized mix through control panel. All the steps will finish automatically without any intervention in a preprogrammed sequence stored in programmable logic controller (PLC). With the help of this equipment we not only can control the quality of ice cream for various conditions, but also can simplify the production process. This control system is inexpensive and can be widely used in ice cream production industry.

Avian influenza control strategies

USDA-ARS?s Scientific Manuscript database

Control strategies for avian influenza in poultry vary depending on whether the goal is prevention, management, or eradication. Components used in control programs include: 1) education which includes communication, public awareness, and behavioral change, 2) changes to production and marketing sys...

Financial Management: A Growing Concern for Child Nutrition Program Administrators.

ERIC Educational Resources Information Center

Cater, Jerry B.; Mann, Nadine; Conklin, Martha

1999-01-01

A study of revenue-generation and cost-control measures currently employed at four school districts operating financially successful child-nutrition programs disclosed the importance of student participation to each program's financial integrity. Financial reports, productivity monitoring, and procurement plans to curb food costs were also…

Autonomous benthic algal cultivator under feedback control of ecosystem metabolism

USDA-ARS?s Scientific Manuscript database

An autonomous and internally-controlled techno-ecological hybrid was developed that controls primary production of algae in a laboratory-scale cultivator. The technoecosystem is based on an algal turf scrubber (ATS) system that combines engineered feedback control programming with internal feedback...

Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

NASA Technical Reports Server (NTRS)

Jamar, L. G.

1986-01-01

Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

Development of HIDEC adaptive engine control systems

NASA Technical Reports Server (NTRS)

Landy, R. J.; Yonke, W. A.; Stewart, J. F.

1986-01-01

The purpose of NASA's Highly Integrated Digital Electronic Control (HIDEC) flight research program is the development of integrated flight propulsion control modes, and the evaluation of their benefits aboard an F-15 test aircraft. HIDEC program phases are discussed, with attention to the Adaptive Engine Control System (ADECS I); this involves the upgrading of PW1128 engines for operation at higher engine pressure ratios and the production of greater thrust. ADECS II will involve the development of a constant thrust mode which will significantly reduce turbine operating temperatures.

A Simple Economic Model of Cocaine Production

DTIC Science & Technology

1994-01-01

been important, often dominant, in U.S. relationships with the Andean region and, at times, with Burma, Mexico , Pakistan, and Turkey. The effort to...control drug production overseas has generally been viewed as ineffective. Mexico , the most cooperative of the source countries, continues to produce...attractive option, since the program would not face the difficulties presented in Mexico (the only country with an active program) of small, dispersed

An intervention program with the aim to improve and maintain work productivity for workers with rheumatoid arthritis: design of a randomized controlled trial and cost-effectiveness study

PubMed Central

2012-01-01

Background Workers with rheumatoid arthritis (RA) often experience restrictions in functioning at work and participation in employment. Strategies to maintain work productivity exist, but these interventions do not involve the actual workplace. Therefore the aim of this study is to investigate the (cost)effectiveness of an intervention program at the workplace on work productivity for workers with RA. Methods/design This study is a randomized controlled trial (RCT) in specialized rheumatology treatment centers in or near Amsterdam, the Netherlands. Randomisation to either the control or the intervention group is performed at patient level. Both groups will receive care as usual by the rheumatologist, and patients in the intervention group will also take part in the intervention program. The intervention program consists of two components; integrated care, including a participatory workplace intervention. Integrated care involves a clinical occupational physician, who will act as care manager, to coordinate the care. The care manager has an intermediate role between clinical and occupational care. The participatory workplace intervention will be guided by an occupational therapist, and involves problem solving by the patient and the patients’ supervisor. The aim of the workplace intervention is to achieve consensus between patient and supervisor concerning feasible solutions for the obstacles for functioning at work. Data collection will take place at baseline and after 6 and 12 months by means of a questionnaire. The primary outcome measure is work productivity, measured by hours lost from work due to presenteeism. Secondary outcome measures include sick leave, quality of life, pain and fatigue. Cost-effectiveness of the intervention program will be evaluated from the societal perspective. Discussion Usual care of primary and outpatient health services is not aimed at improving work productivity. Therefore it is desirable to develop interventions aimed at improving functioning at work. If the intervention program will be (cost)effective, substantial improvements in work productivity might be obtained among workers with RA at lower costs. Results are expected in 2015. Trial registration number NTR2886 PMID:22747949

An intervention program with the aim to improve and maintain work productivity for workers with rheumatoid arthritis: design of a randomized controlled trial and cost-effectiveness study.

PubMed

van Vilsteren, Myrthe; Boot, Cécile R L; Steenbeek, Romy; van Schaardenburg, Dirkjan; Voskuyl, Alexandre E; Anema, Johannes R

2012-07-02

Workers with rheumatoid arthritis (RA) often experience restrictions in functioning at work and participation in employment. Strategies to maintain work productivity exist, but these interventions do not involve the actual workplace. Therefore the aim of this study is to investigate the (cost)effectiveness of an intervention program at the workplace on work productivity for workers with RA. This study is a randomized controlled trial (RCT) in specialized rheumatology treatment centers in or near Amsterdam, the Netherlands. Randomisation to either the control or the intervention group is performed at patient level. Both groups will receive care as usual by the rheumatologist, and patients in the intervention group will also take part in the intervention program. The intervention program consists of two components; integrated care, including a participatory workplace intervention. Integrated care involves a clinical occupational physician, who will act as care manager, to coordinate the care. The care manager has an intermediate role between clinical and occupational care. The participatory workplace intervention will be guided by an occupational therapist, and involves problem solving by the patient and the patients' supervisor. The aim of the workplace intervention is to achieve consensus between patient and supervisor concerning feasible solutions for the obstacles for functioning at work. Data collection will take place at baseline and after 6 and 12 months by means of a questionnaire. The primary outcome measure is work productivity, measured by hours lost from work due to presenteeism. Secondary outcome measures include sick leave, quality of life, pain and fatigue. Cost-effectiveness of the intervention program will be evaluated from the societal perspective. Usual care of primary and outpatient health services is not aimed at improving work productivity. Therefore it is desirable to develop interventions aimed at improving functioning at work. If the intervention program will be (cost)effective, substantial improvements in work productivity might be obtained among workers with RA at lower costs. Results are expected in 2015. NTR2886.

9 CFR 316.4 - Marking devices; to be furnished by official establishments; control of.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking devices; to be furnished by official establishments; control of. 316.4 Section 316.4 Animals and Animal Products FOOD SAFETY AND... seals, shall be used only under supervision of a Program employee, and, when not in use for marking...

9 CFR 316.4 - Marking devices; to be furnished by official establishments; control of.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Marking devices; to be furnished by official establishments; control of. 316.4 Section 316.4 Animals and Animal Products FOOD SAFETY AND... seals, shall be used only under supervision of a Program employee, and, when not in use for marking...

Operation Cleansweep in Florida: Extension's Role in an Environmentally Friendly Program Opportunity

ERIC Educational Resources Information Center

Fishel, Fred

2010-01-01

Operation Cleansweep is a free pesticide disposal program that has operated in Florida since 1995. The program is open to commercial facilities, including agricultural production establishments, golf course operators, and pest control companies. Since its inception, the program has had more than 1,700 participants and collected more than 1,000,000…

Operation Cleansweep in Florida: Extension's Role in an Environmental-Friendly Program Opportunity

ERIC Educational Resources Information Center

Fishel, Fred

2010-01-01

Operation Cleansweep is a free pesticide disposal program that has operated in Florida since 1995. The program is open to commercial facilities, including agricultural production establishments, golf course operators, and pest control companies. Since its inception, the program has had more than 1,700 participants and collected more than 1,000,000…

A simple approach to industrial laser safety.

PubMed

Lewandowski, Michael A; Hinz, Michael W

2005-02-01

Industrial applications of lasers include marking, welding, cutting, and other material processing. Lasers used in these ways have significant power output but are generally designed to limit operator exposure to direct or scattered laser radiation to harmless levels in order to meet the Federal Laser Product Performance Standard (21CFR1040) for Class 1 laser products. Interesting challenges occur when companies integrate high power lasers into manufacturing or process control equipment. A significant part of the integration process is developing engineering and administrative controls to produce an acceptable level of laser safety while balancing production, maintenance, and service requirements. 3M Company uses a large number of high power lasers in numerous manufacturing processes. Whether the laser is purchased as a Class 1 laser product or whether it is purchased as a Class 4 laser and then integrated into a manufacturing application, 3M Company has developed an industrial laser safety program that maintains a high degree of laser safety while facilitating the rapid and economical integration of laser technology into the manufacturing workplace. This laser safety program is based on the requirements and recommendations contained in the American National Standard for Safe Use of Lasers, ANSI Z136.1. The fundamental components of the 3M program include hazard evaluation, engineering, administrative, and procedural controls, protective equipment, signs and labels, training, and re-evaluation upon change. This program is implemented in manufacturing facilities and has resulted in an excellent history of laser safety and an effective and efficient use of laser safety resources.

Revitalize Electrical Program with Renewable Energy Focus

ERIC Educational Resources Information Center

Karns, Robert J.

2012-01-01

Starting a renewable energy technology (RET) program can be as simple as shifting the teaching and learning focus of a traditional electricity program toward energy production and energy control systems. Redirecting curriculum content and delivery to address photovoltaic solar (PV solar) technology and small wind generation systems is a natural…

Health Indicators: A Tool for Program Review

ERIC Educational Resources Information Center

Abou-Sayf, Frank K.

2006-01-01

A visual tool used to evaluate instructional program performance has been designed by the University of Hawaii Community College system. The tool combines features from traffic lights, blood-chemistry test reports, and industry production control charts, and is labeled the Program Health-Indicator Chart. The tool was designed to minimize the labor…

78 FR 37570 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

... Interactive Program Guide and Parental Control Technology; Notice of Request for Statements on the Public... questions regarding filing should contact the Secretary (202-205-2000). Any person desiring to submit a... taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and of...

40 CFR 158.2070 - Biochemical pesticides product performance data requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... efficacy data unless the pesticide product bears a claim to control public health pests, such as pest... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Biochemical pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Biochemical Pesticides § 158.2070...

40 CFR 158.2070 - Biochemical pesticides product performance data requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... efficacy data unless the pesticide product bears a claim to control public health pests, such as pest... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Biochemical pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Biochemical Pesticides § 158.2070...

40 CFR 158.2160 - Microbial pesticides product performance data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... unless the pesticide product bears a claim to control public health pests, such as pest microorganisms... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Microbial pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Microbial Pesticides § 158.2160...

40 CFR 158.2070 - Biochemical pesticides product performance data requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... efficacy data unless the pesticide product bears a claim to control public health pests, such as pest... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Biochemical pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Biochemical Pesticides § 158.2070...

40 CFR 158.2160 - Microbial pesticides product performance data requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... unless the pesticide product bears a claim to control public health pests, such as pest microorganisms... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Microbial pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Microbial Pesticides § 158.2160...

40 CFR 158.2160 - Microbial pesticides product performance data requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... unless the pesticide product bears a claim to control public health pests, such as pest microorganisms... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Microbial pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Microbial Pesticides § 158.2160...

40 CFR 158.2160 - Microbial pesticides product performance data requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... unless the pesticide product bears a claim to control public health pests, such as pest microorganisms... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Microbial pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Microbial Pesticides § 158.2160...

40 CFR 158.2070 - Biochemical pesticides product performance data requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... efficacy data unless the pesticide product bears a claim to control public health pests, such as pest... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Biochemical pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Biochemical Pesticides § 158.2070...

40 CFR 158.2070 - Biochemical pesticides product performance data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... efficacy data unless the pesticide product bears a claim to control public health pests, such as pest... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Biochemical pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Biochemical Pesticides § 158.2070...

40 CFR 158.2160 - Microbial pesticides product performance data requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... unless the pesticide product bears a claim to control public health pests, such as pest microorganisms... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Microbial pesticides product... AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Microbial Pesticides § 158.2160...

Multi-Mission Automated Task Invocation Subsystem

NASA Technical Reports Server (NTRS)

Cheng, Cecilia S.; Patel, Rajesh R.; Sayfi, Elias M.; Lee, Hyun H.

2009-01-01

Multi-Mission Automated Task Invocation Subsystem (MATIS) is software that establishes a distributed data-processing framework for automated generation of instrument data products from a spacecraft mission. Each mission may set up a set of MATIS servers for processing its data products. MATIS embodies lessons learned in experience with prior instrument- data-product-generation software. MATIS is an event-driven workflow manager that interprets project-specific, user-defined rules for managing processes. It executes programs in response to specific events under specific conditions according to the rules. Because requirements of different missions are too diverse to be satisfied by one program, MATIS accommodates plug-in programs. MATIS is flexible in that users can control such processing parameters as how many pipelines to run and on which computing machines to run them. MATIS has a fail-safe capability. At each step, MATIS captures and retains pertinent information needed to complete the step and start the next step. In the event of a restart, this information is retrieved so that processing can be resumed appropriately. At this writing, it is planned to develop a graphical user interface (GUI) for monitoring and controlling a product generation engine in MATIS. The GUI would enable users to schedule multiple processes and manage the data products produced in the processes. Although MATIS was initially designed for instrument data product generation,

Analysis of modern technologies commonly used in beef cattle production: conventional beef production versus nonconventional production using meta-analysis.

PubMed

Wileman, B W; Thomson, D U; Reinhardt, C D; Renter, D G

2009-10-01

Conventional feeding systems use pharmaceutical products not allowed in natural or organic systems for finishing cattle. This review of data compares the performance effects (ADG, G:F, DMI) of technologies used in conventional feeding programs that are prohibited in organic programs, natural programs, or both. The technologies evaluated were steroid implants, monensin, tylosin, endectocides, and metaphylaxis with any antimicrobial. For inclusion in this analysis, studies were conducted in North America, reported randomization to treatment group, used beef cattle, contained an untreated control group, and were sourced from peer-reviewed journals. Forest plots were used to examine the data visually for trends toward a uniform effect of the technology on the outcomes of interest (ADG, DMI, G:F). Technologies that displayed a uniform response on the forest plot compared with negative controls were then analyzed using mixed models. Examination of forest plots for endectocides, steroid implants, monensin, and metaphylaxis technologies appeared to show performance advantages for treated cattle relative to cattle in negative control groups. An insufficient number of studies met the inclusion criteria to conduct meta-analyses comparing endectocides, monensin, or tylosin with negative controls. Average daily gain in feeder cattle given metaphylaxis on arrival was 0.11 kg/d (P < 0.01) greater relative to cattle that did not receive metaphylaxis on arrival. Implanting heifers increased ADG by 0.08 kg/d compared with nonimplanted controls (P = 0.09). Implants had no effect on G:F (P = 0.14) in heifers or on DMI (P = 0.44) relative to nonimplanted control heifers. Implanting steers was associated with greater ADG, by 0.25 kg/d (P < 0.01), and DMI, by 0.53 kg/d (P < 0.01), relative to nonimplanted control steers. Implants also improved G:F in steers relative to nonimplanted steers, by 0.02 (0.17 vs. 0.15; implanted vs. controls, P < 0.01; n = 21 studies). When average estimated differences in ADG and G:F for implanted and nonimplanted steers were incorporated into a breakeven model, implanted steers had a $77/animal lower cost of production than nonimplanted steers and a $349/animal lower cost of production than organically raised steers. These data illustrate the importance of capturing premiums when operating natural and organic production systems to maintain economic viability.

Trichinae certification in the United States pork industry.

PubMed

Pyburn, David G; Gamble, H Ray; Wagstrom, Elizabeth A; Anderson, Lowell A; Miller, Lawrence E

2005-09-05

Control of Trichinella infection in U.S. pork has traditionally been accomplished by inspection of individual carcasses at slaughter or by post-slaughter processing to inactivate parasites. We propose that an alternative to individual carcass testing or processing can be used when pigs are raised in production systems where risk of exposure to Trichinella spiralis has been mitigated. Declines in prevalence of this parasite in U.S. domestic swine during the last 30 years, coupled with improvements in pork production systems, now allow Trichinella control to be shifted to the farm through implementation of specific pork production practices. Knowledge of risk factors for exposure of swine to T. spiralis was used to develop an objective audit of risk that can be applied to pork production sites. In a pilot study, 461 production site audits were performed by trained veterinary practitioners. The on-farm audit included aspects of farm management, bio-security, feed and feed storage, rodent control programs and general hygiene. Of the 461 production site audits, 450 audits (97.6%) indicated compliance with the required good production practices. These sites are eligible for certification under the U.S. Trichinae Certification Program and will be audited regularly to maintain that status. The described trichinae certification mechanism will establish a process for ensuring the Trichinella safety of swine, and ultimately food products derived from swine, at the production level.

Mathematical modeling for resource and energy saving control of extruders in multi-assortment productions of polymeric films

NASA Astrophysics Data System (ADS)

Polosin, A. N.; Chistyakova, T. B.

2018-05-01

In this article, the authors describe mathematical modeling of polymer processing in extruders of various types used in extrusion and calender productions of film materials. The method consists of the synthesis of a static model for calculating throughput, energy consumption of the extruder, extrudate quality indices, as well as a dynamic model for evaluating polymer residence time in the extruder, on which the quality indices depend. Models are adjusted according to the extruder type (single-screw, reciprocating, twin-screw), its screw and head configuration, extruder’s work temperature conditions, and the processed polymer type. Models enable creating extruder screw configurations and determining extruder controlling action values that provide the extrudate of required quality while satisfying extruder throughput and energy consumption requirements. Model adequacy has been verified using polyolefins’ and polyvinylchloride processing data in different extruders. The program complex, based on mathematical models, has been developed in order to control extruders of various types in order to ensure resource and energy saving in multi-assortment productions of polymeric films. Using the program complex in the control system for the extrusion stage of the polymeric film productions enables improving film quality, reducing spoilage, lessening the time required for production line change-over to other throughput and film type assignment.

Multicomponent exercise decreases blood pressure, heart rate and double product in normotensive and hypertensive older patients with high blood pressure.

PubMed

Coelho-Júnior, Hélio José; Asano, Ricardo Yukio; Gonçalvez, Ivan de Oliveira; Brietzke, Cayque; Pires, Flávio Oliveira; Aguiar, Samuel da Silva; Feriani, Daniele Jardim; Caperuto, Erico Chagas; Uchida, Marco Carlos; Rodrigues, Bruno

2018-02-26

The present study aimed to investigate the effects of a 6-month multicomponent exercise program on blood pressure, heart rate, and double product of uncontrolled and controlled normotensive and hypertensive older patients. The study included 183 subjects, 97 normotensives, of which 53 were controlled normotensives (CNS), and 44 uncontrolled normotensives (UNS), as well as 86 hypertensives, of which 43 were controlled hypertensives (CHS), and 43 uncontrolled hypertensives (UHS). Volunteers were recruited and blood pressure and heart rate measurements were made before and after a 6-month multicomponent exercise program. The program of physical exercise was performed twice a week for 26 weeks. The physical exercises program was based on functional and walking exercises. Exercise sessions were performed at moderate intensity. The results indicated that UHS showed a marked decrease in systolic (-8.0mmHg), diastolic (-11.1mmHg), mean (-10.1mmHg), and pulse pressures, heart rate (-6.8bpm), and double product (-1640bpmmmHg), when compared to baseline. Similarly, diastolic (-5.5mmHg) and mean arterial (-4.8mmHg) pressures were significantly decreased in UNS. Concomitantly, significant changes could be observed in the body mass index (-0.9kg/m 2 ; -1.5kg/m 2 ) and waist circumference (-3.3cm; only UHS) of UNS and UHS, which may be associated with the changes observed in blood pressure. In conclusion, the data of the present study indicate that a 6-month multicomponent exercise program may lead to significant reductions in blood pressure, heart rate, and double product of normotensive and hypertensive patients with high blood pressure values. Copyright © 2018 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Acquisition-Management Program

NASA Technical Reports Server (NTRS)

Avery, Don E.; Vann, A. Vernon; Jones, Richard H.; Rew, William E.

1987-01-01

NASA Acquisition Management Subsystem (AMS) program integrated NASA-wide standard automated-procurement-system program developed in 1985. Designed to provide each NASA installation with procurement data-base concept with on-line terminals for managing, tracking, reporting, and controlling contractual actions and associated procurement data. Subsystem provides control, status, and reporting for various procurement areas. Purpose of standardization is to decrease costs of procurement and operation of automatic data processing; increases procurement productivity; furnishes accurate, on-line management information and improves customer support. Written in the ADABAS NATURAL.

Design of supply chain in fuzzy environment

NASA Astrophysics Data System (ADS)

Rao, Kandukuri Narayana; Subbaiah, Kambagowni Venkata; Singh, Ganja Veera Pratap

2013-05-01

Nowadays, customer expectations are increasing and organizations are prone to operate in an uncertain environment. Under this uncertain environment, the ultimate success of the firm depends on its ability to integrate business processes among supply chain partners. Supply chain management emphasizes cross-functional links to improve the competitive strategy of organizations. Now, companies are moving from decoupled decision processes towards more integrated design and control of their components to achieve the strategic fit. In this paper, a new approach is developed to design a multi-echelon, multi-facility, and multi-product supply chain in fuzzy environment. In fuzzy environment, mixed integer programming problem is formulated through fuzzy goal programming in strategic level with supply chain cost and volume flexibility as fuzzy goals. These fuzzy goals are aggregated using minimum operator. In tactical level, continuous review policy for controlling raw material inventories in supplier echelon and controlling finished product inventories in plant as well as distribution center echelon is considered as fuzzy goals. A non-linear programming model is formulated through fuzzy goal programming using minimum operator in the tactical level. The proposed approach is illustrated with a numerical example.

Comparative Programs for Arthropod, Disease and Weed Management in New York Organic Apples

PubMed Central

Agnello, Arthur; Cox, Kerik; Lordan, Jaume; Francescatto, Poliana; Robinson, Terence

2017-01-01

Organic apple production in the eastern US is small and is mostly based on existing varieties, which are susceptible to scab, and rootstocks, which are susceptible to fire blight. This requires numerous sprays per year of various pesticides to produce acceptable fruit. From 2014 to 2016, we tested different arthropod, disease and weed management programs in an advanced tall spindle high-density production system that included disease-resistant cultivars and rootstocks, in an organic research planting of apples in Geneva, New York. Arthropod and disease management regimens were characterized as Advanced Organic, Minimal Organic, or Untreated Control. Results varied by year and variety, but, in general, the Advanced program was more effective than the Minimal program in preventing damage from internal-feeding Lepidoptera, plum curculio, and obliquebanded leafroller, and less effective than the Minimal program against damage by foliar insects. Both organic programs provided comparable control of sooty blotch, cedar apple rust, and fire blight, with some variability across cultivars and years. The advanced selection CC1009 and Modi seemed to possess complete resistance to cedar apple rust, while Pristine had partial resistance. For weed control, bark chip mulch, organic soap sprays, and limonene sprays tended to be most effective, while mechanical tillage and flame weeding had lower success. PMID:28869562

Role of the pre- and post-natal environment in developmental programming of health and productivity.

PubMed

Reynolds, Lawrence P; Caton, Joel S

2012-05-06

The concept that developmental insults (for example, poor pre- or postnatal nutrition) can have long-term consequences on health and well-being of the offspring has been termed developmental programming. In livestock, developmental programming affects production traits, including growth, body composition, and reproduction. Although low birth weight was used as a proxy for compromised fetal development in the initial epidemiological studies, based on controlled studies using livestock and other animal models in the last two decades we now know that developmental programming can occur independently of any effects on birth weight. Studies in humans, rodents, and livestock also have confirmed the critical role of the placenta in developmental programming. In addition, the central role of epigenetic regulation in developmental programming has been confirmed. Lastly, relatively simple therapeutic/management strategies designed to 'rescue' placental development and function are being developed to minimize the effects of developmental programming on health and productivity of humans, livestock, and other mammals. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Effect of Mindfulness Based Stress Reduction on Immune Function, Quality of Life and Coping In Women Newly Diagnosed with Early Stage Breast Cancer

PubMed Central

Witek-Janusek, Linda; Albuquerque, Kevin; Chroniak, Karen Rambo; Chroniak, Christopher; Durazo, Ramon; Mathews, Herbert L.

2008-01-01

This investigation used a non-randomized controlled design to evaluate the effect and feasibility of a mindfulness based stress reduction (MBSR) program on immune function, quality of life (QOL), and coping in women recently diagnosed with breast cancer. Early stage breast cancer patients, who did not receive chemotherapy, self-selected into an 8-week MBSR program or into an assessment only, control group. Outcomes were evaluated over time. The first assessment was at least 10 days after surgery and prior to adjuvant therapy, as well as before the MBSR start-up. Further assessments were mid-MBSR, at completion of MBSR, and at 4-weeks post MBSR completion. Women with breast cancer enrolled in the control group (Non-MBSR) were assessed at similar times. At the first assessment (i.e., before MBSR start), reductions in peripheral blood mononuclear cell NK cell activity (NKCA) and IFN gamma production with increases in IL-4, IL-6, and IL-10 production and plasma cortisol levels were observed for both the MBSR and Non-MBSR groups of breast cancer patients. Over time women in the MBSR group re-established their NKCA and cytokine production levels. In contrast, breast cancer patients in the Non-MBSR group exhibited continued reductions in NKCA and IFN gamma production with increased IL-4, IL-6, and IL-10 production. Moreover, women enrolled in the MBSR program had reduced cortisol levels, improved QOL, and increased coping effectiveness compared to the Non-MBSR group. In summary, MBSR is a program that is feasible for women recently diagnosed with early stage breast cancer and the results provide preliminary evidence of beneficial effects of MBSR on immune function, QOL, and coping effectiveness. PMID:18359186

New developments in water efficiency

NASA Astrophysics Data System (ADS)

Gregg, Tony T.; Dewees, Amanda; Gross, Drema; Hoffman, Bill; Strub, Dan; Watson, Matt

2006-10-01

An overview of significant new developments in water efficiency is presented in this paper. The areas covered will be legislative, regulatory, new programs or program wrinkles, new products, and new studies on the effectiveness of conservation programs. Examples include state and local level efficiency regulations in Texas; the final results of the national submetering study for apartments in the US; the US effort to adopt the IWA protocols for leak detection; new water efficient commercial products such as ET irrigation controllers, new models of efficient clothes washers, and innovative toilet designs.

LACIE performance predictor final operational capability program description, volume 3

NASA Technical Reports Server (NTRS)

1976-01-01

The requirements and processing logic for the LACIE Error Model program (LEM) are described. This program is an integral part of the Large Area Crop Inventory Experiment (LACIE) system. LEM is that portion of the LPP (LACIE Performance Predictor) which simulates the sample segment classification, strata yield estimation, and production aggregation. LEM controls repetitive Monte Carlo trials based on input error distributions to obtain statistical estimates of the wheat area, yield, and production at different levels of aggregation. LEM interfaces with the rest of the LPP through a set of data files.

Optimization of controlled environments for hydroponic production of leaf lettuce for human life support in CELSS

NASA Technical Reports Server (NTRS)

Mitchell, C. A.; Knight, S. L.; Ford, T. L.

1986-01-01

A research project in the food production group of the Closed Ecological Life Support System (CELSS) program sought to define optimum conditions for photosynthetic productivity of a higher plant food crop. The effects of radiation and various atmospheric compositions were studied.

40 CFR 161.640 - Product performance data requirements table.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pesticide product bears a claim to control pest microorganisms that pose a threat to human health and whose...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES Data Requirement Tables... microbial pests associated with human and animal wastes (1) CR EP* 91-7 Products for treating water systems...

Consumer acceptance of vegetarian sweet potato products intended for space missions.

PubMed

Wilson, C D; Pace, R D; Bromfield, E; Jones, G; Lu, J Y

1998-01-01

Sweet potato is one of the crops selected for NASA's Advanced Life Support Program for potential long-duration lunar/Mars missions. This article presents recipes of products made from sweet potato and determines the consumer acceptability of products containing from 6% to 20% sweet potato on a dry weight basis. These products were developed for use in nutritious and palatable meals for future space explorers. Sensory evaluation (appearance/color, aroma, texture, flavor/taste, and overall acceptability) studies were conducted to determine the consumer acceptability of vegetarian products made with sweet potato using panelists at NASA/Johnson Space Center in Houston, TX. None of these products including the controls, contained any ingredient of animal origin with the exception of sweet potato pie. A 9-point hedonic scale (9 being like extremely and 1 being dislike extremely) was used to evaluate 10 products and compare them to similar commercially available products used as controls. The products tested were pancakes, waffles, tortillas, bread, pie, pound cake, pasta, vegetable patties, doughnuts, and pretzels. All of the products were either liked moderately or liked slightly with the exception of the sweet potato vegetable patties, which were neither liked nor disliked. Mean comparisons of sensory scores of sweet potato recipes and their controls were accomplished by using the Student t-test. Because of their nutritional adequacy and consumer acceptability, these products are being recommended to NASA's Advanced Life Support Program for inclusion in a vegetarian menu plan designed for lunar/Mars space missions.

Secure Web-based Ground System User Interfaces over the Open Internet

NASA Technical Reports Server (NTRS)

Langston, James H.; Murray, Henry L.; Hunt, Gary R.

1998-01-01

A prototype has been developed which makes use of commercially available products in conjunction with the Java programming language to provide a secure user interface for command and control over the open Internet. This paper reports successful demonstration of: (1) Security over the Internet, including encryption and certification; (2) Integration of Java applets with a COTS command and control product; (3) Remote spacecraft commanding using the Internet. The Java-based Spacecraft Web Interface to Telemetry and Command Handling (Jswitch) ground system prototype provides these capabilities. This activity demonstrates the use and integration of current technologies to enable a spacecraft engineer or flight operator to monitor and control a spacecraft from a user interface communicating over the open Internet using standard World Wide Web (WWW) protocols and commercial off-the-shelf (COTS) products. The core command and control functions are provided by the COTS Epoch 2000 product. The standard WWW tools and browsers are used in conjunction with the Java programming technology. Security is provided with the current encryption and certification technology. This system prototype is a step in the direction of giving scientist and flight operators Web-based access to instrument, payload, and spacecraft data.

Cultural and chemical pest control methods alter habitat suitability for biological control agents: An example from Wisconsin commercial cranberry

USDA-ARS?s Scientific Manuscript database

An integrated pest control program requires an in-depth understanding of the compatibility of all control strategies used. In Wisconsin commercial cranberry production, early-season control strategies may include either a broad-spectrum insecticide application or a corresponding spring flood, along ...

Schools: Army Correspondence Course Program Catalog

DTIC Science & Technology

2001-10-26

Course Number: 061 M50) a. Objective. To provide an overview of targeting fundamentals to NCO with current or anticipated assignment to target production...D15) a. Objective/Scope. To provide students an overview of the DOD Reutilization and Marketing System. Emphasis is placed upon the organization and...providing an overview of financial systems, statutory controls, and programs. This course encompasses defense financial systems and controls to include

The application of the Accelerated Stability Assessment Program (ASAP) to quality by design (QbD) for drug product stability.

PubMed

Waterman, Kenneth Craig

2011-09-01

An isoconversion paradigm, where times in different temperature and humidity-controlled stability chambers are set to provide a fixed degradant level, is shown to compensate for the complex, non-single order kinetics of solid drug products. A humidity-corrected Arrhenius equation provides reliable estimates for temperature and relative humidity effects on degradation rates. A statistical protocol is employed to determine best fits for chemical stability data, which in turn allows for accurate estimations of shelf life (with appropriate confidence intervals) at any storage condition including inside packaging (based on the moisture vapor transmission rate of the packaging and moisture sorption isotherms of the internal components). These methodologies provide both faster results and far better predictions of chemical stability limited shelf life (expiry) than previously possible. Precise shelf-life estimations are generally determined using a 2-week, product-specific protocol. Once the model for a product is developed, it can play a critical role in providing the product understanding necessary for a quality by design (QbD) filing for product approval and enable rational control strategies to assure product stability. Moreover, this Accelerated Stability Assessment Program (ASAP) enables the coupling of product attributes (e.g., moisture content, packaging options) to allow for flexibility in how control strategies are implemented to provide a balance of cost, speed, and other factors while maintaining adequate stability.

Man-rated flight software for the F-8 DFBW program

NASA Technical Reports Server (NTRS)

Bairnsfather, R. R.

1975-01-01

The design, implementation, and verification of the flight control software used in the F-8 DFBW program are discussed. Since the DFBW utilizes an Apollo computer and hardware, the procedures, controls, and basic management techniques employed are based on those developed for the Apollo software system. Program Assembly Control, simulator configuration control, erasable-memory load generation, change procedures and anomaly reporting are discussed. The primary verification tools--the all-digital simulator, the hybrid simulator, and the Iron Bird simulator--are described, as well as the program test plans and their implementation on the various simulators. Failure-effects analysis and the creation of special failure-generating software for testing purposes are described. The quality of the end product is evidenced by the F-8 DFBW flight test program in which 42 flights, totaling 58 hours of flight time, were successfully made without any DFCS inflight software, or hardware, failures.

A Review of Economic Evaluations of Tobacco Control Programs

PubMed Central

Kahende, Jennifer W.; Loomis, Brett R.; Adhikari, Bishwa; Marshall, LaTisha

2009-01-01

Each year, an estimated 443,000 people die of smoking-related diseases in the United States. Cigarette smoking results in more than $193 billion in medical costs and productivity losses annually. In an effort to reduce this burden, many states, the federal government, and several national organizations fund tobacco control programs and policies. For this report we reviewed existing literature on economic evaluations of tobacco control interventions. We found that smoking cessation therapies, including nicotine replacement therapy (NRT) and self-help are most commonly studied. There are far fewer studies on other important interventions, such as price and tax increases, media campaigns, smoke free air laws and workplace smoking interventions, quitlines, youth access enforcement, school-based programs, and community-based programs. Although there are obvious gaps in the literature, the existing studies show in almost every case that tobacco control programs and policies are either cost-saving or highly cost-effective. PMID:19440269

Comparison of the hazards posed to amphibians by the glyphosate spray control program versus the chemical and physical activities of coca production in Colombia.

PubMed

Brain, Richard A; Solomon, Keith R

2009-01-01

This study evaluates the cumulative multifactorial physical and chemical impacts resulting from coca production on amphibian populations in comparison with the potential impacts produced by the herbicide glyphosate (Glyphos), which, mixed with the surfactant Cosmo-Flux, is used in the spray control program for illicit crops in Colombia. Using similar worst-case assumptions for exposure, several other pesticides used for coca production, including mancozeb, lambda cyhalothrin, endosulfan, diazinon, malathion, and chlorpyrifos, were up to 10- to 100-fold more toxic to frogs than the Glyphos-Cosmo-Flux mixture. Comparing hazard quotients based on application rates, several of these compounds demonstrated hazards 3-383 times that of formulated glyphosate. Secondary effects, particularly of insecticides, are also a concern, as these agents selectively target the primary food source of amphibians, which may indirectly impact growth and development. Although the potential chemical impacts by other pesticides are considerable, physical activities associated with coca production, particularly deforestation of primary forests for new coca plots, portend the greatest hazard to amphibian populations. The entire production cycle of cocaine has been linked to ecosystem degradation. The clearing of pristine forests for coca propagation in Colombia is well documented, and some of these regions coincide with those that contain exceptional amphibian biodiversity. This is particularly problematic as coca production encroaches more deeply into more remote areas of tropical rain forest. Transportation of disease, including the chitrid fungus, to these remote regions via human intrusion may also adversely affect amphibian populations. Therefore, the cumulative impacts of coca production, through habitat destruction, application of agrochemicals, and potential transmission of disease, are judged to pose greater risks to amphibian populations in coca-growing regions than the glyphosate spray control program.

An Analysis of the Future Combat Systems (FCS) Spin Out 1 Low-Rate of Initial Production (LRIP) Contract

DTIC Science & Technology

2009-08-24

interests are strategic resource management, strategic control, and corporate financial reporting. Joseph G. San Miguel Professor Graduate School of...Officer PM – Program Manager SAIC – Science Applications International Corporation SAP – Systems Applications and Products SDD – System Development and...the award of the multi-billion dollar FCS program management contract to the Boeing Company and Science Applications International Corporation (SAIC

AI in manufacturing

NASA Astrophysics Data System (ADS)

Gross, John E.; Minato, Rick; Smith, David M.; Loftin, R. B.; Savely, Robert T.

1991-10-01

AI techniques are shown to have been useful in such aerospace industry tasks as vehicle configuration layouts, process planning, tool design, numerically-controlled programming of tools, production scheduling, and equipment testing and diagnosis. Accounts are given of illustrative experiences at the production facilities of three major aerospace defense contractors. Also discussed is NASA's autonomous Intelligent Computer-Aided Training System, for such ambitious manned programs as Space Station Freedom, which employs five different modules to constitute its job-independent training architecture.

Conserving carnivorous arthropods: an example from early-season cranberry (Ericaceae) flooding

USDA-ARS?s Scientific Manuscript database

Biological control plays an important role in many IPM programs, but can be disrupted by other control strategies, including chemical and cultural controls. In commercial cranberry production, a spring flood can replace an insecticide application, providing an opportunity to study the compatibility ...

Telephone-administered cognitive-behavioral therapy for clients with depressive symptoms in an employee assistance program: a pilot study.

PubMed

Lam, Raymond W; Lutz, Kevin; Preece, Melady; Cayley, Paula M; Bowen Walker, Anne

2011-02-01

To assess the clinical and work productivity effects of a brief intervention using telephone-administered cognitive-behavioral therapy (CBT) for clients with depressive symptoms attending an employee assistance program (EAP). Self-referred clients attending the PPC Canada EAP with clinically relevant depressive symptoms at initial assessment were offered an 8-session telephone-administered CBT program. Outcomes before and after intervention were assessed with the 9-item Personal Health Questionnaire (PHQ-9), Global Assessment of Functioning (GAF), and clinician ratings of work absence and performance impairment. Fifty clients were referred to the pilot program; 39 participated and 31 completed the telephone CBT program. Among program participants, there was significant improvement in PHQ-9 and GAF scores. There was also a significant reduction in performance impairment but not work absence. Anecdotal reports indicated high satisfaction ratings among participants. The results of this pilot study, although limited by the absence of a comparison or control group, suggest that a brief telephone-administered CBT program can improve depressive symptomatology, work productivity, and general function in depressed clients attending an EAP. Further controlled studies are needed to confirm these preliminary findings.

40 CFR 1054.701 - General provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1054.701 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS... include engines or equipment certified for California if California has more stringent emission standards for these products or if your products generate or use emission credits under the California program...

40 CFR 1054.701 - General provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 1054.701 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS... include engines or equipment certified for California if California has more stringent emission standards for these products or if your products generate or use emission credits under the California program...

40 CFR 1054.701 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1054.701 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS... include engines or equipment certified for California if California has more stringent emission standards for these products or if your products generate or use emission credits under the California program...

40 CFR 1054.701 - General provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1054.701 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS... include engines or equipment certified for California if California has more stringent emission standards for these products or if your products generate or use emission credits under the California program...

40 CFR 1054.701 - General provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 1054.701 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS... include engines or equipment certified for California if California has more stringent emission standards for these products or if your products generate or use emission credits under the California program...

R and D Productivity: New Challenges for the US Space Program

NASA Technical Reports Server (NTRS)

Baskin, O. W. (Editor); Sullivan, L. J. (Editor)

1985-01-01

Various topics related to research and development activities applicable to their U.S. space program are discussed. Project management, automatic control technology, human resources, management information systems, computer aided design, systems engineering, and personnel management were among the topics covered.

Effective algorithm for solving complex problems of production control and of material flows control of industrial enterprise

NASA Astrophysics Data System (ADS)

Mezentsev, Yu A.; Baranova, N. V.

2018-05-01

A universal economical and mathematical model designed for determination of optimal strategies for managing subsystems (components of subsystems) of production and logistics of enterprises is considered. Declared universality allows taking into account on the system level both production components, including limitations on the ways of converting raw materials and components into sold goods, as well as resource and logical restrictions on input and output material flows. The presented model and generated control problems are developed within the framework of the unified approach that allows one to implement logical conditions of any complexity and to define corresponding formal optimization tasks. Conceptual meaning of used criteria and limitations are explained. The belonging of the generated tasks of the mixed programming with the class of NP is shown. An approximate polynomial algorithm for solving the posed optimization tasks for mixed programming of real dimension with high computational complexity is proposed. Results of testing the algorithm on the tasks in a wide range of dimensions are presented.

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

1982-01-01

This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

Data Analyses and Modelling for Risk Based Monitoring of Mycotoxins in Animal Feed

PubMed Central

van der Fels-Klerx, H.J. (Ine); Adamse, Paulien; Punt, Ans; van Asselt, Esther D.

2018-01-01

Following legislation, European Member States should have multi-annual control programs for contaminants, such as for mycotoxins, in feed and food. These programs need to be risk based implying the checks are regular and proportional to the estimated risk for animal and human health. This study aimed to prioritize feed products in the Netherlands for deoxynivalenol and aflatoxin B1 monitoring. Historical mycotoxin monitoring results from the period 2007–2016 were combined with data from other sources. Based on occurrence, groundnuts had high priority for aflatoxin B1 monitoring; some feed materials (maize and maize products and several oil seed products) and complete/complementary feed excluding dairy cattle and young animals had medium priority; and all other animal feeds and feed materials had low priority. For deoxynivalenol, maize by-products had a high priority, complete and complementary feed for pigs had a medium priority and all other feed and feed materials a low priority. Also including health consequence estimations showed that feed materials that ranked highest for aflatoxin B1 included sunflower seed and palmkernel expeller/extracts and maize. For deoxynivalenol, maize products were ranked highest, followed by various small grain cereals (products); all other feed materials were of lower concern. Results of this study have proven to be useful in setting up the annual risk based control program for mycotoxins in animal feed and feed materials. PMID:29373559

Real-Time Monitoring of Scada Based Control System for Filling Process

NASA Astrophysics Data System (ADS)

Soe, Aung Kyaw; Myint, Aung Naing; Latt, Maung Maung; Theingi

2008-10-01

This paper is a design of real-time monitoring for filling system using Supervisory Control and Data Acquisition (SCADA). The monitoring of production process is described in real-time using Visual Basic.Net programming under Visual Studio 2005 software without SCADA software. The software integrators are programmed to get the required information for the configuration screens. Simulation of components is expressed on the computer screen using parallel port between computers and filling devices. The programs of real-time simulation for the filling process from the pure drinking water industry are provided.

78 FR 70012 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

..., Office of Management and Budget (OMB), New Executive Office Building, Washington, DC; New Executive... a currently valid OMB control number. Agricultural Marketing Service Title: National Organic Program... marketing of certain agricultural products as organically produced products; (2) to assure consumers that...

What Lies Ahead

DTIC Science & Technology

2016-09-20

ways to reduce this burden. What will happen next? Our hope , and the administration’s goal, is a political compromise that will resolve the impasse in...affordable programs. • “Control costs throughout the product life cycle. • “Incentivize productivity and innovation in industry and government

Introduction to HACCP.

USDA-ARS?s Scientific Manuscript database

The Hazard Analysis and Critical Control Point (HACCP) food safety inspection program is utilized by both USDA Food Safety Inspection Service (FSIS) and FDA for many of the products they regulate. This science-based program was implemented by the USDA FSIS to enhance the food safety of meat and pou...

Symbolic computer vector analysis

NASA Technical Reports Server (NTRS)

Stoutemyer, D. R.

1977-01-01

A MACSYMA program is described which performs symbolic vector algebra and vector calculus. The program can combine and simplify symbolic expressions including dot products and cross products, together with the gradient, divergence, curl, and Laplacian operators. The distribution of these operators over sums or products is under user control, as are various other expansions, including expansion into components in any specific orthogonal coordinate system. There is also a capability for deriving the scalar or vector potential of a vector field. Examples include derivation of the partial differential equations describing fluid flow and magnetohydrodynamics, for 12 different classic orthogonal curvilinear coordinate systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.; Britt, J.; Birkmire, R.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., assisted by NREL's PV Manufacturing R&D program, have continued to advance CIGS production technology by developing trajectory-oriented predictive/control models, fault-tolerance control, control platform development, in-situ sensors, and process improvements. Modeling activities included developing physics-based and empirical models for CIGS and sputter-deposition processing, implementing model-based control, and applying predictive models to the construction of new evaporation sources and for control. Model-based control is enabled by implementing reduced or empirical models into a control platform. Reliability improvement activities include implementing preventive maintenance schedules; detecting failed sensors/equipment and reconfiguring to tinue processing; and systematicmore » development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which in turn have been enabled by control and reliability improvements due to this PV Manufacturing R&D program.« less

Effects of organic matter removal, soil compaction, and vegetation control on 5-year seedling performance: a regional comparison of long-term soil productivity sites

Treesearch

Robert L. Fleming; Robert F. Powers; Neil W. Foster; J. Marty Kranabetter; D. Andrew Scott; Felix Jr. Ponder; Shannon Berch; William K. Chapman; Richard D. Kabzems; Kim H. Ludovici; David M. Morris; Deborah S. Page-Dumroese; Paul T. Sanborn; Felipe G. Sanchez; Douglas M. Stone; Allan E. Tiarks

2006-01-01

We examined fifth-year seedling response to soil disturbance and vegetation control at 42 experimental locations representing 25 replicated studies within the North American Long-Term Soil Productivity (LTSP) program. These studies share a common experimental design while encompassing a wide range of climate, site conditions, and forest types. Whole-tree harvest had...

78 FR 41609 - Energy Conservation Program for Consumer Products: Test Procedures for Refrigerators...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

.... Incomplete Cycling 6. Mechanical Temperature Controls 7. Ambient Temperature Gradient 8. Definitions.... at 29846-29847. A broad group of stakeholders \\1\\ submitted a joint comment supporting DOE's proposal... for variable defrost control (a control type in which the time interval between successive defrost...

Editing of EIA coded, numerically controlled, machine tool tapes

NASA Technical Reports Server (NTRS)

Weiner, J. M.

1975-01-01

Editing of numerically controlled (N/C) machine tool tapes (8-level paper tape) using an interactive graphic display processor is described. A rapid technique required for correcting production errors in N/C tapes was developed using the interactive text editor on the IMLAC PDS-ID graphic display system and two special programs resident on disk. The correction technique and special programs for processing N/C tapes coded to EIA specifications are discussed.

U.S. Coast Guard Cutter Procurement Lessons Impacts on the Offshore Patrol Cutter (OPC) Program Affordability

DTIC Science & Technology

2015-12-01

Block Buy Contracting Budget Control Act Bureau of Labor and Statistics Command, Control, Communications, Computers, Intelligence, Surveillance, and...made prior to full-rate production. If the program is delinquent in the testing of all of the functionality and the ability to meet stated KPPs, the...incorporating the Bureau of Labor Statistics calculations on shipbuilding labor costs, average material cost per ship, and “wrap rate” for overhead

An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

NASA Technical Reports Server (NTRS)

Sampson, Paul G.; Sny, Linda C.

1992-01-01

The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

9 CFR 381.409 - Nutrition label content.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... that are available only through a weight-control program qualify for nutrition claims. (3) The...

9 CFR 381.409 - Nutrition label content.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Nutrition label content. 381.409... INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Nutrition Labeling § 381.409 Nutrition... that are available only through a weight-control program qualify for nutrition claims. (3) The...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - INSPEC FIBRES 5512BRF FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - MENARDI-CRISWELL 50-504 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

40 CFR 85.1908 - Disclaimer of production warranty applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Disclaimer of production warranty applicability. 85.1908 Section 85.1908 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Emission Defect Reporting Requirements...

The principles of HACCP.

USDA-ARS?s Scientific Manuscript database

The Hazard Analysis and Critical Control Point (HACCP) food safety inspection program is utilized by both USDA Food Safety Inspection Service (FSIS) and FDA for many of the products they regulate. This science-based program was implemented by the USDA FSIS to enhance the food safety of meat and pou...

Evolution of Stored-Product Entomology: Protecting the World Food Supply.

PubMed

Hagstrum, David W; Phillips, Thomas W

2017-01-31

Traditional methods of stored-product pest control were initially passed from generation to generation. Ancient literature and archaeology reveal hermetic sealing, burning sulfur, desiccant dusts, and toxic botanicals as early control methods. Whereas traditional nonchemical methods were subsequently replaced by synthetic chemicals, other traditional methods were improved and integrated with key modern pesticides. Modern stored-product integrated pest management (IPM) makes decisions using knowledge of population dynamics and threshold insect densities. IPM programs are now being fine-tuned to meet regulatory and market standards. Better sampling methods and insights from life histories and ecological studies have been used to optimize the timing of pest management. Over the past 100 years, research on stored-product insects has shifted from being largely concentrated within 10 countries to being distributed across 65 countries. Although the components of IPM programs have been well researched, more research is needed on how these components can be combined to improve effectiveness and assure the security of postharvest food as the human population increases.

A Ground Systems Architecture Transition for a Distributed Operations System

NASA Technical Reports Server (NTRS)

Sellers, Donna; Pitts, Lee; Bryant, Barry

2003-01-01

The Marshall Space Flight Center (MSFC) Ground Systems Department (GSD) recently undertook an architecture change in the product line that serves the ISS program. As a result, the architecture tradeoffs between data system product lines that serve remote users versus those that serve control center flight control teams were explored extensively. This paper describes the resulting architecture that will be used in the International Space Station (ISS) payloads program, and the resulting functional breakdown of the products that support this architecture. It also describes the lessons learned from the path that was followed, as a migration of products cause the need to reevaluate the allocation of functions across the architecture. The result is a set of innovative ground system solutions that is scalable so it can support facilities of wide-ranging sizes, from a small site up to large control centers. Effective use of system automation, custom components, design optimization for data management, data storage, data transmissions, and advanced local and wide area networking architectures, plus the effective use of Commercial-Off-The-Shelf (COTS) products, provides flexible Remote Ground System options that can be tailored to the needs of each user. This paper offers a description of the efficiency and effectiveness of the Ground Systems architectural options that have been implemented, and includes successful implementation examples and lessons learned.

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Control of microbial contamination.

NASA Technical Reports Server (NTRS)

Mcdade, J. J.

1971-01-01

Two specific applications are discussed of microbial contamination control in planetary quarantine. Under the first concept, using the clean room to control environmental microorganisms, the objective is to reduce the microbial species and keep the numbers of microorganisms within an enclosure at a low level. The clean room concept is aimed at obtaining a product that has a controlled and reduced level of microbial contamination. Under the second concept, using the microbiological barrier to control microbial contamination of a specific product, the barrier techniques are designed to prevent the entry of any microorganisms into a sterile work area. Thus the assembly of space flight hardware within the confines of a microbiological barrier is aimed at obtaining a sterile product. In theory and practice, both approaches are shown to be applicable to the planetary quarantine program.

Econotherapeutics.

PubMed

Roark, M K; Reed, W E

1995-01-01

A program that represents the efforts of a hospital pharmacy management company to control drug costs is described. The program, Econotherapeutics, was developed in response to a changed health care reimbursement system that focused on the costs of products rather than the revenue generated by these products. For antimicrobial agents, a hospital-specific antibiogram is used to encourage cost-effective prescribing. A pharmacist intervention program, medical staff presentations, drug usage evaluation, management systems, and educational programs for pharmacists are all essential parts of the program. Centralized data gathering has allowed cost comparison of specific antimicrobial agents so that differences between variable cost estimates and costs based on actual use can be evaluated. Actual dose and dosage interval were used to calculate average cost per treatment day in a 121-hospital sample. Our cost data support the choice of cefotaxime over ceftriaxone.

Durably controlling bovine hypodermosis.

PubMed

Boulard, Chantal

2002-01-01

Cattle hypodermosis, due to insect larvae, is widely spread over the northern hemisphere. Very efficient insecticides are available and their use in most countries are done on an individual level but never cover the whole cattle population of a country. Untreated animals remain the reservoir of the disease and annually re-infest the cattle population. The economic effects of this disease on animal production (meat, milk and the leather industry) but also on the general cattle health status, have led many European countries to launch organised control programs. The first example of definitive hypodermosis control goes back one hundred years ago when Danish farmers eradicated hypodermosis from the Danish islands by manual elimination of the warbles. Since then, more and more European countries have considered the feasibility and economic returns of such programs. The various factors which foster these programs are related to (i) biological factors, (parasite cattle specificity, synchronous biological cycles of both species of insects involved), (ii) the development of more and more efficient insecticides used only once a year by systemic application, with high efficiency at very low dosages against the first larval stage of Hypoderma spp., (iii) the development of acute techniques of detection of the disease for the monitoring of hypodermosis free countries and (iv) the durable successful results obtained in more and more European countries. Although the programs were imposed by different partners of the livestock channel production (farmers, dairy industry, leather industry) and have been engaged within the last 50 years in many European countries (Denmark, The Netherlands, Ireland, the United Kingdom, the Czech Republic, Germany, France and Switzerland) common features have emerged among these different eradication programs. They all need a preliminary statement of the economic impact of this pest and the farmers' awareness of the economic returns of such programs. The programs' efficacy depends: (i) on a good knowledge ofthe epidemiology of the parasites, (ii) on the simultaneous implementation of the control program on the whole national cattle population whatever the structure monitoring the treatments (veterinary services, farmers association), (iii) on a national Warble fly legislation making the treatments compulsory and (iv) on an acute epidemiological survey as soon as the status of a hypodermosis free country is reached and the treatments are suspended. The sanitary and financial returns of such programs are a benefit to all the partners of livestock production, to the quality of the environment and to the consumers.

Recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays

NASA Astrophysics Data System (ADS)

Manea, L. R.; Hristian, L.; Leon, A. L.; Popa, A.

2016-08-01

Among the foreground domains of all the research-development programs at national and international level, a special place is occupied by that concerning the nanosciences, nanotechnologies, new materials and technologies. Electrospinning found a well-deserved place in this space, offering the preparation of nanomaterials with distinctive properties and applications in medicine, environment, photonic sensors, filters, etc. These multiple applications are generated by the fact that the electrospinning technology makes available the production of nanofibers with controllable characteristics (length, porosity, density, and mechanical characteristics), complexity and architecture. The apparition of 3D printing technology favors the production of complex nanofibrous structures, controlled assembly, self-assembly of electrospun nanofibers for the production of scaffolds used in various medical applications. The architecture of fibrous deposits has a special influence on the subsequent development of the cells of the reconstructed organism. The present work proposes to study of recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays and progress in research on the production of complex 2D and 3D structures.

Evaluation and characterization of the methane-carbon dioxide decomposition reaction

NASA Technical Reports Server (NTRS)

Davenport, R. J.; Schubert, F. H.; Shumar, J. W.; Steenson, T. S.

1975-01-01

A program was conducted to evaluate and characterize the carbon dioxide-methane (CO2-CH4) decomposition reaction, i.e., CO2 + CH4 = 2C + 2H2O. The primary objective was to determine the feasibility of applying this reaction at low temperatures as a technique for recovering the oxygen (O2) remaining in the CO2 which exits mixed with CH4 from a Sabatier CO2 reduction subsystem (as part of an air revitalization system of a manned spacecraft). A test unit was designed, fabricated, and assembled for characterizing the performance of various catalysts for the reaction and ultraviolet activation of the CH4 and CO2. The reactor included in the test unit was designed to have sufficient capacity to evaluate catalyst charges of up to 76 g (0.17 lb). The test stand contained the necessary instrumentation and controls to obtain the data required to characterize the performance of the catalysts and sensitizers tested: flow control and measurement, temperature control and measurement, product and inlet gas analysis, and pressure measurement. A product assurance program was performed implementing the concepts of quality control and safety into the program effort.

Employers should disband employee weight control programs.

PubMed

Lewis, Alfred; Khanna, Vikram; Montrose, Shana

2015-02-01

American corporations continue to expand wellness programs, which now reach an estimated 90% of workers in large organizations, yet no study has demonstrated that the main focus of these programs-weight control-has any positive effect. There is no published evidence that large-scale corporate attempts to control employee body weight through financial incentives and penalties have generated savings from long-term weight loss, or a reduction in inpatient admissions associated with obesity or even long-term weight loss itself. Other evidence contradicts the hypothesis that population obesity rates meaningfully retard economic growth or manufacturing productivity. Quite the contrary, overscreening and crash dieting can impact employee morale and even harm employee health. Therefore, the authors believe that corporations should disband or significantly reconfigure weight-oriented wellness programs, and that the Affordable Care Act should be amended to require such programs to conform to accepted guidelines for harm avoidance.

Evaluating Results of Human Resources Programs/Practices.

ERIC Educational Resources Information Center

Blai, Boris Jr.

1989-01-01

Contends that wise management human resources decisions may yield direct payroll savings in fewer workers for compatible production; controllable personnel turnover; greater flexibility to achieve new and emergency jobs; low waste, reject and accident programs; and low sick absences. Systematic follow-up must be integral part of effort to achieve…

40 CFR 1027.101 - To whom do these requirements apply?

Code of Federal Regulations, 2011 CFR

2011-07-01

... POLLUTION CONTROLS FEES FOR ENGINE, VEHICLE, AND EQUIPMENT COMPLIANCE PROGRAMS § 1027.101 To whom do these..., vehicle, and equipment compliance program (EVECP). This includes activities related to approving... products: (1) Motor vehicles and motor vehicle engines we regulate under 40 CFR part 86. This includes...

76 FR 46841 - Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-747] Certain Products Containing.... International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has determined not to review the presiding administrative law judge's (``ALJ'') initial...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - AIR PURATOR CORPORATION HUYGLAS 1405M FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BHA GROUP, INC. QG061 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - STANDARD FILTER CORPORATION PE16ZU FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

Aquatic Plant Control Research Program. Biological Control of Hydrilla verticillata (L.f.) Royle with Lytic Enzyme-Producing Microorganisms.

DTIC Science & Technology

1985-09-01

pectinase . Lytic enzyme-positive isolates were successively subcultured on restrictive media in the laboratory to enhance enzyme production. Twenty-two...candidate microorganisms by testing isolates for produc- tion of cellulase and pectinase . c. Taxonomically characterize candidates. d. Enhance production of...present study, but could become necessary if results of this study indicate that cellulase-enhanced v ,isolates are capable of damaging hydrilla. Pectinase

The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

PubMed

Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

2011-01-01

PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also significantly improved self-reported productivity. CONCLUSION. An effective intervention can change employee health risk status and activation both at the population level and at the individual high risk level. However, program engagement at the population level was low, indicating that additional promotional strategies, such as greater use of incentives, need to be examined. Less intensive coaching can be as effective as more intensive, albeit both interventions produced modest behavior change and retention in the consumer activation arm was most difficult. Further research is needed concerning recruitment and retention methods that will enable populations to realize the full potential of activated consumerism.

Traditional versus rule-based programming techniques - Application to the control of optional flight information

NASA Technical Reports Server (NTRS)

Ricks, Wendell R.; Abbott, Kathy H.

1987-01-01

A traditional programming technique for controlling the display of optional flight information in a civil transport cockpit is compared to a rule-based technique for the same function. This application required complex decision logic and a frequently modified rule base. The techniques are evaluated for execution efficiency and implementation ease; the criterion used to calculate the execution efficiency is the total number of steps required to isolate hypotheses that were true and the criteria used to evaluate the implementability are ease of modification and verification and explanation capability. It is observed that the traditional program is more efficient than the rule-based program; however, the rule-based programming technique is more applicable for improving programmer productivity.

The proactive approach--is it worthwhile? A prospective controlled ergonomic intervention study in office workers.

PubMed

Laestadius, Jasminka Goldoni; Ye, Jian; Cai, Xiaodong; Ross, Sandra; Dimberg, Lennart; Klekner, Meg

2009-10-01

Does proactive ergonomics program enhance office worker health and productivity? The investigation was conducted in connection with the move of 1500 office staff to a building with improved ergonomics. It was focused on associations between workstation features, working postures, musculoskeletal pain symptoms, and eye strain before and 18 months after implementation of a proactive ergonomic program. The outcomes were compared between the intervention and a similar reference group. Associations between improvement of postures and less musculoskeletal pain and eye strain were confirmed. A cross association between several features and postures and improved symptoms was noted, along with improved productivity. The study suggests that a proactive program adhering to the OSHA recommendations needs to include an individual workstation assessment to be effective in reducing symptoms and increasing productivity.

A National Residue Control Plan from the analytical perspective--the Brazilian case.

PubMed

Mauricio, Angelo de Q; Lins, Erick S; Alvarenga, Marcelo B

2009-04-01

Food safety is a strategic topic entailing not only national public health aspects but also competitiveness in international trade. An important component of any food safety program is the control and monitoring of residues posed by certain substances involved in food production. In turn, a National Residue Control Plan (NRCP) relies on an appropriate laboratory network, not only to generate analytical results, but also more broadly to verify and co-validate the controls built along the food production chain. Therefore laboratories operating under a NRCP should work in close cooperation with inspection bodies, fostering the critical alignment of the whole system with the principles of risk analysis. Beyond producing technically valid results, these laboratories should arguably be able to assist in the prediction and establishment of targets for official control. In pursuit of analytical excellence, the Brazilian government has developed a strategic plan for Official Agricultural Laboratories. Inserted in a national agenda for agricultural risk analysis, the plan has succeeded in raising laboratory budget by approximately 200%, it has started a rigorous program for personnel capacity-building, it has initiated strategic cooperation with international reference centres, and finally, it has completely renewed instrumental resources and rapidly triggered a program aimed at full laboratory compliance with ISO/IEC 17025 requirements.

Development and testing of the Solar Control Corporation modular controller and Solarstat subsystem

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1979-01-01

Results of development work on an existing controller and solarstat subsystem for use with solar heating and cooling systems are presented. The deliverable end items, program objectives, and how they were accomplished are described. It is shown that the products developed are marketable and suitable for public use.

40 CFR 82.13 - Recordkeeping and reporting requirements for class I controlled substances.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Recordkeeping and reporting requirements for class I controlled substances. 82.13 Section 82.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls § 82.13 Recordkeeping and...

40 CFR 82.13 - Recordkeeping and reporting requirements for class I controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Recordkeeping and reporting requirements for class I controlled substances. 82.13 Section 82.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls § 82.13 Recordkeeping and...

The development of a contract quality assurance program within the Virginia Department of Highways.

DOT National Transportation Integrated Search

1989-01-01

In order to assure the quality of construction products and processes, the Virginia Department of Transportation has established three levels of construction control. First, contractors themselves provide oversight and quality control as set out in t...

The effect of new purchase criteria on food procurement for the Brazilian school feeding program.

PubMed

Soares, Panmela; Davó-Blanes, M Carmen; Martinelli, Suellen Secchi; Melgarejo, Leonardo; Cavalli, Suzi Barletto

2017-01-01

To explore the effect of the school feeding program purchase criteria on the quantity, variety and origin of food products acquired for school meals in a municipality in Brazil. Analysis of purchase lists for two years prior and two years after implementation of the purchase criteria (2010). The origin (family farms (FF)/other providers (OP)) and nutritional characteristics (recommended/controlled) of food products were studied, registering annual varieties (n) and daily quantities (kg/day); contrast of proportions was applied. The acquisition of recommended products increased, and the quantity of controlled products decreased (p = 0.005). Purchase of legumes and vegetables (p < 0.05) increased and high sugar foods decreased (p = 0.02). The majority of food products in 2010 and 2011 were acquired from OP (64% and 61%), although FF provided the greatest proportion of legumes and vegetables. Ten new varieties of recommended products were incorporated, 9 of which were acquired from FF. The criteria of direct purchase from family farms resulted in an increase in the variety and quantity of healthy foods in the schools in the municipality. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optical Method For Monitoring Tool Control For Green Burnishing With Using Of Algorithms With Adaptive Settings

NASA Astrophysics Data System (ADS)

Lukyanov, A. A.; Grigoriev, S. N.; Bobrovskij, I. N.; Melnikov, P. A.; Bobrovskij, N. M.

2017-05-01

With regard to the complexity of the new technology and increase its reliability requirements laboriousness of control operations in industrial quality control systems increases significantly. The importance of quality management control due to the fact that its promotes the correct use of production conditions, the relevant requirements are required. Digital image processing allows to reach a new technological level of production (new technological way). The most complicated automated interpretation of information is the basis for decision-making in the management of production processes. In the case of surface analysis of tools used for processing with the using of metalworking fluids (MWF) it is more complicated. The authors suggest new algorithm for optical inspection of the wear of the cylinder tool for burnishing, which used in surface plastic deformation without using of MWF. The main advantage of proposed algorithm is the possibility of automatic recognition of images of burnisher tool with the subsequent allocation of its boundaries, finding a working surface and automatically allocating the defects and wear area. Software that implements the algorithm was developed by the authors in Matlab programming environment, but can be implemented using other programming languages.

Combat Ration Advanced Manufacturing Technology Demonstration (CRAMTD). ’Generic Inspection-Statistical Process Control System for a Combat Ration Manufacturing Facility’. Short Term Project (STP) Number 3.

DTIC Science & Technology

1996-01-01

failure as due to an adhesive layer between the foil and inner polypropylene layers. "* Under subcontract, NFPA provided HACCP draft manuals for the...parameters of the production process and to ensure that they are within their target values. In addition, a HACCP program was used to assure product...played an important part in implementing Hazard Analysis Critical Control Points ( HACCP ) as part of the Process and Quality Control manual. The National

Review of nuclear pharmacy practice in hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawada, T.K.; Tubis, M.; Ebenkamp, T.

1982-02-01

An operational profile for nuclear pharmacy practice is presented, and the technical and professional role of nuclear pharmacists is reviewed. Key aspects of nuclear pharmacy practice in hospitals discussed are the basic facilities and equipment for the preparation, quality control, and distribution of radioactive drug products. Standards for receiving, storing, and processing radioactive material are described. The elements of a radiopharmaceutical quality assurance program, including the working procedures, documentation systems, data analysis, and specific control tests, are presented. Details of dose preparation and administration and systems of inventory control for radioactive products are outlined.

U.S. Coast Guard Cutter Procurement Lessons Impacts on the Offshore Patrol Cutter Program Affordability

DTIC Science & Technology

2015-12-01

Budget Control Act BLS Bureau of Labor and Statistics C4ISR Command, Control, Communications, Computers, Intelligence, Surveillance, and...made prior to full-rate production. If the program is delinquent in the testing of all of the functionality and the ability to meet stated KPPs, the...estimated the price per pound of the ship by incorporating the Bureau of Labor Statistics calculations on shipbuilding labor costs, average material cost

Results-driven approach to improving quality and productivity

Treesearch

John Dramm

2000-01-01

Quality control (QC) programs do not often realize their full potential. Elaborate and expensive QC programs can easily get side tracked by the process of building a program with promises of “Someday, this will all pay off.” Training employees in QC methods is no guarantee that quality will improve. Several documented cases show that such activity-centered efforts...

Space tug point design study. Volume 4: Program requirements

NASA Technical Reports Server (NTRS)

1973-01-01

A study was conducted to determine the configuration of a space tug and to predict the performance parameters. The program plans and planning data generated in support of the tug development program are presented. The preliminary plans and supporting planning data emphasize the following requirements: (1) maintenance and refurbishment, (2) technology development, (3) production, (4) test facilities, (5) quality control, and (6) scheduling.

A health system program to reduce work disability related to musculoskeletal disorders.

PubMed

Abásolo, Lydia; Blanco, Margarita; Bachiller, Javier; Candelas, Gloria; Collado, Paz; Lajas, Cristina; Revenga, Marcelino; Ricci, Patricia; Lázaro, Pablo; Aguilar, Maria Dolores; Vargas, Emilio; Fernández-Gutiérrez, Benjamín; Hernández-García, César; Carmona, Loreto; Jover, Juan A

2005-09-20

Musculoskeletal disorders (MSDs) are a frequent cause of work disability, accounting for productivity losses in industrialized societies equivalent to 1.3% of the U.S. gross national product. To evaluate whether a population-based clinical program offered to patients with recent-onset work disability caused by MSDs is cost-effective. Randomized, controlled intervention study. The inclusion and follow-up periods each lasted 12 months. Three health districts in Madrid, Spain. All patients with MSD-related temporary work disability in 1998 and 1999. The control group received standard primary care management, with referral to specialized care if needed. The intervention group received a specific program, administered by rheumatologists, in which care was delivered during regular visits and included 3 main elements: education, protocol-based clinical management, and administrative duties. Efficacy variables were 1) days of temporary work disability and 2) number of patients with permanent work disability. All analyses were done on an intention-to-treat basis. 1,077 patients were included in the study, 7805 in the control group and 5272 in the intervention group, generating 16,297 episodes of MSD-related temporary work disability. These episodes were shorter in the intervention group than in the control group (mean, 26 days compared with 41 days; P < 0.001), and the groups had similar numbers of episodes per patient. Fewer patients received long-term disability compensation in the intervention group (n = 38 [0.7%]) than in the control group (n = 99 [1.3%]) (P < 0.005). Direct and indirect costs were lower in the intervention group than in the control group. To save 1 day of temporary work disability, 6.00 dollars had to be invested in the program. Each dollar invested generated a benefit of 11.00 dollars. The program's net benefit was in excess of 5 million dollars. The study was unblinded. Implementation of the program, offered to the general population, improves short- and long-term work disability outcomes and is cost-effective.

Development of High Efficiency Clean Combustion Engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marriott, Craig; Gonzalez, Manual; Russell, Durrett

2011-06-30

This report summarizes activities related to the revised STATEMENT OF PROJECT OBJECTIVES (SOPO) dated June 2010 for the Development of High-Efficiency Clean Combustion engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines (COOPERATIVE AGREEMENT NUMBER DE-FC26-05NT42415) project. In both the spark- (SI) and compression-ignition (CI) development activities covered in this program, the goal was to develop potential production-viable internal combustion engine system technologies that both reduce fuel consumption and simultaneously met exhaust emission targets. To be production-viable, engine technologies were also evaluated to determine if they would meet customer expectations of refinement in terms of noise, vibration, performance, driveability, etc.more » in addition to having an attractive business case and value. Prior to this activity, only proprietary theoretical / laboratory knowledge existed on the combustion technologies explored The research reported here expands and develops this knowledge to determine series-production viability. Significant SI and CI engine development occurred during this program within General Motors, LLC over more than five years. In the SI program, several engines were designed and developed that used both a relatively simple multi-lift valve train system and a Fully Flexible Valve Actuation (FFVA) system to enable a Homogeneous Charge Compression Ignition (HCCI) combustion process. Many technical challenges, which were unknown at the start of this program, were identified and systematically resolved through analysis, test and development. This report documents the challenges and solutions for each SOPO deliverable. As a result of the project activities, the production viability of the developed clean combustion technologies has been determined. At this time, HCCI combustion for SI engines is not considered production-viable for several reasons. HCCI combustion is excessively sensitive to control variables such as internal dilution level and charge temperature. As a result, HCCI combustion has limited robustness when variables exceed the required narrow ranges determined in this program. HCCI combustion is also not available for the entire range of production engine speeds and loads, (i.e., the dynamic range is limited). Thus, regular SI combustion must be employed for a majority of the full dynamic range of the engine. This degrades the potential fuel economy impact of HCCI combustion. Currently-available combustion control actuators for the simple valve train system engine do not have the authority for continuous air - fuel or torque control for managing the combustion mode transitions between SI and HCCI and thus, require further refinement to meet customer refinement expectations. HCCI combustion control sensors require further development to enable robust long-term HCCI combustion control. Finally, the added technologies required to effectively manage HCCI combustion such as electric cam phasers, central direct fuel injection, cylinder pressure sensing, high-flow exhaust gas recirculation system, etc. add excessive on-engine cost and complexity that erodes the production-viability business« less

Assessment Study on Sensors and Automation in the Industries of the Future. Reports on Industrial Controls, Information Processing, Automation, and Robotics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Bonnie; Boddy, Mark; Doyle, Frank

This report presents the results of an expert study to identify research opportunities for Sensors & Automation, a sub-program of the U.S. Department of Energy (DOE) Industrial Technologies Program (ITP). The research opportunities are prioritized by realizable energy savings. The study encompasses the technology areas of industrial controls, information processing, automation, and robotics. These areas have been central areas of focus of many Industries of the Future (IOF) technology roadmaps. This report identifies opportunities for energy savings as a direct result of advances in these areas and also recognizes indirect means of achieving energy savings, such as product quality improvement,more » productivity improvement, and reduction of recycle.« less

Object positioning in storages of robotized workcells using LabVIEW Vision

NASA Astrophysics Data System (ADS)

Hryniewicz, P.; Banaś, W.; Sękala, A.; Gwiazda, A.; Foit, K.; Kost, G.

2015-11-01

During the manufacturing process, each performed task is previously developed and adapted to the conditions and the possibilities of the manufacturing plant. The production process is supervised by a team of specialists because any downtime causes great loss of time and hence financial loss. Sensors used in industry for tracking and supervision various stages of a production process make it much easier to maintain it continuous. One of groups of sensors used in industrial applications are non-contact sensors. This group includes: light barriers, optical sensors, rangefinders, vision systems, and ultrasonic sensors. Through to the rapid development of electronics the vision systems were widespread as the most flexible type of non-contact sensors. These systems consist of cameras, devices for data acquisition, devices for data analysis and specialized software. Vision systems work well as sensors that control the production process itself as well as the sensors that control the product quality level. The LabVIEW program as well as the LabVIEW Vision and LabVIEW Builder represent the application that enables program the informatics system intended to process and product quality control. The paper presents elaborated application for positioning elements in a robotized workcell. Basing on geometric parameters of manipulated object or on the basis of previously developed graphical pattern it is possible to determine the position of particular manipulated elements. This application could work in an automatic mode and in real time cooperating with the robot control system. It allows making the workcell functioning more autonomous.

Articulatory Control in Childhood Apraxia of Speech in a Novel Word-Learning Task.

PubMed

Case, Julie; Grigos, Maria I

2016-12-01

Articulatory control and speech production accuracy were examined in children with childhood apraxia of speech (CAS) and typically developing (TD) controls within a novel word-learning task to better understand the influence of planning and programming deficits in the production of unfamiliar words. Participants included 16 children between the ages of 5 and 6 years (8 CAS, 8 TD). Short- and long-term changes in lip and jaw movement, consonant and vowel accuracy, and token-to-token consistency were measured for 2 novel words that differed in articulatory complexity. Children with CAS displayed short- and long-term changes in consonant accuracy and consistency. Lip and jaw movements did not change over time. Jaw movement duration was longer in children with CAS than in TD controls. Movement stability differed between low- and high-complexity words in both groups. Children with CAS displayed a learning effect for consonant accuracy and consistency. Lack of change in movement stability may indicate that children with CAS require additional practice to demonstrate changes in speech motor control, even within production of novel word targets with greater consonant and vowel accuracy and consistency. The longer movement duration observed in children with CAS is believed to give children additional time to plan and program movements within a novel skill.

77 FR 3998 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

...: Regulations for Inspection of Eggs. OMB Control Number: 0581-0113. Summary of Collection: Congress enacted the Egg Products Inspection Act (21 U.S.C. 1031-1056) (EPIA) to provide a mandatory inspection program to assure egg products are processed under sanitary conditions, are wholesome, unadulterated, and properly...

Effect of exposure time on mass-rearing production of the olive fruit fly parasitoid, Psyttalia lounsburyi (Hymenoptera: Braconidae)

USDA-ARS?s Scientific Manuscript database

Classical biological control programs rely on mass-production of high quality beneficial insects for subsequent releases into the field. Psyttalia lounsburyi (Silvestri) (Hymenoptera: Braconidae) is a koinobiont larval-pupal endoparasitoid of tephritid flies that is being reared to support a classic...

78 FR 49766 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-845] Certain Products Containing... a Final Initial Determination Finding No Violation of Section 337 AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has...

Evaluation of non-fumigant pesticides as methyl bromide alternatives for managing weeds in vegetables

USDA-ARS?s Scientific Manuscript database

The phase out of methyl bromide challenged vegetable growers’ abilities to control weeds in low-density polyethylene (LDPE) mulch production systems. The herbicides halosulfuron, fomesafen, s-metolachlor, and clomazone are needed as part of the pesticide program in LDP vegetable production to contr...

40 CFR 158.220 - Experimental use permit data requirements for product performance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... pesticide product bears a claim to control pest microorganisms that pose a threat to human health and whose... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Experimental Use Permits..., birds, bats, canids, and skunks) that may directly or indirectly transmit diseases to humans. However...

40 CFR 158.220 - Experimental use permit data requirements for product performance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... pesticide product bears a claim to control pest microorganisms that pose a threat to human health and whose... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Experimental Use Permits..., birds, bats, canids, and skunks) that may directly or indirectly transmit diseases to humans. However...

40 CFR 158.220 - Experimental use permit data requirements for product performance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... pesticide product bears a claim to control pest microorganisms that pose a threat to human health and whose... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Experimental Use Permits..., birds, bats, canids, and skunks) that may directly or indirectly transmit diseases to humans. However...

40 CFR 158.220 - Experimental use permit data requirements for product performance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pesticide product bears a claim to control pest microorganisms that pose a threat to human health and whose... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Experimental Use Permits..., birds, bats, canids, and skunks) that may directly or indirectly transmit diseases to humans. However...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - W.L. GORE & ASSOCIATES, INC. L4347 FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - ALBANY INTERNATIONAL CORP. INDUSTRIAL PROCESS TECHNOLOGIES PRIMATEX PLUS I FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BASF CORPORATION AX/BA-14/9-SAXP FILTER SAMPLE

EPA Science Inventory

Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

Production of an English/Russian glossary of terminology for nuclear materials control and accounting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schachowskoj, S.; Smith, H.A. Jr.

The program plans for Former Soviet Union National Nuclear Materials Control and Accounting (MC and A) Systems Enhancements call for the development of an English/Russian Glossary of MC and A terminology. This glossary was envisioned as an outgrowth of the many interactions, training sessions, and other talking and writing exercises that would transpire in the course of carrying out these programs. This report summarizes the status of the production of this glossary, the most recent copy of which is attached to this report. The glossary contains over 950 terms and acronyms associated with nuclear material control and accounting for safeguardsmore » and nonproliferation. This document is organized as follows: English/Russian glossary of terms and acronyms; Russian/English glossary of terms and acronyms; English/Russian glossary of acronyms; and Russian/English glossary of acronyms.« less

Science Operations of the International Ultraviolet Explorer (IUE) Observatory

NASA Technical Reports Server (NTRS)

1996-01-01

The fundamental operational objective of the International Ultraviolet Explorer (IUE) program is to support competitively selected astronomical research program. Through the IUE program, researchers make IUE observations, have their scientific data reduced in a meaningful way, and receive data products in a form amenable to the pursuit of scientific research. The IUE Observatory is key to the program since it is the central control and support facility for all science support functions within the IUE project.

Chinese vaccine products go global: vaccine development and quality control.

PubMed

Xu, Miao; Liang, Zhenglun; Xu, Yinghua; Wang, Junzhi

2015-05-01

Through the continuous efforts of several generations, China has become one of the few countries in the world that is capable of independently addressing all the requirements by the Expanded Program on Immunization. Regulatory science is applied to continuously improve the vaccine regulatory system. Passing the prequalification by WHO has allowed Chinese vaccine products to go global. Chinese vaccine products not only secure disease prevention and control domestically but also serve the needs for international public health. This article describes the history of Chinese vaccine development, the current situation of Chinese vaccine industry and its contribution to the prevention and control of infectious diseases. We also share our experience of national quality control and vaccine regulation during the past decades. China's experience in vaccine development and quality control can benefit other countries and regions worldwide, including the developing countries.

Bluetongue outbreaks: Looking for effective control strategies against Culicoides vectors.

PubMed

Benelli, Giovanni; Buttazzoni, Luca; Canale, Angelo; D'Andrea, Armando; Del Serrone, Paola; Delrio, Gavino; Foxi, Cipriano; Mariani, Susanna; Savini, Giovanni; Vadivalagan, Chithravel; Murugan, Kadarkarai; Toniolo, Chiara; Nicoletti, Marcello; Serafini, Mauro

2017-12-01

Several arthropod-borne diseases are now rising with increasing impact and risks for public health, due to environmental changes and resistance to pesticides currently marketed. In addition to community surveillance programs and a careful management of herds, a next-generation of effective products is urgently needed to control the spread of these diseases, with special reference to arboviral ones. Natural product research can afford alternative solutions. Recently, a re-emerging of bluetongue disease is ongoing in Italy. Bluetongue is a viral disease that affects ruminants and is spread through the bite of bloodsucking insects, especially Culicoides species. In this review, we focused on the importance of vector control programs for prevention or bluetongue outbreaks, outlining the lack of effective tools in the fight against Culicoides vectors. Then, we analyzed a field case study in Sardinia (Italy) concerning the utilization of the neem cake (Azadirachta indica), to control young instar populations of Culicoides biting midges, the vectors of bluetongue virus. Neem cake is a cheap and eco-friendly by-product obtained from the extraction of neem oil. Overall, we propose that the employ of neem extraction by-products as aqueous formulations in muddy sites close to livestock grazing areas may represent an effective tool in the fight against the spread of bluetongue virus in the Mediterranean areas. Copyright © 2017 Elsevier Ltd. All rights reserved.

Iterative evaluation in a mobile counseling and testing program to reach people of color at risk for HIV--new strategies improve program acceptability, effectiveness, and evaluation capabilities.

PubMed

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2011-06-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program's results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention's HIV testing recommendations.

Orius insidiosus (Say) and entomopathogens as possible biological control agents for thrips

Treesearch

Ronald D. Oetting; Ramona J. Beshear

1991-01-01

The entomology program in ornamental floriculture at the University of Georgia places primary emphasis on commercial production of flowering and foliage plants under greenhouse conditions. Thrips management is a major part of that program. Several species of foliage and flower inhabiting species are pests on greenhouse crops. The western flower thrips, ...

76 FR 32886 - Control of Emissions From New Highway Vehicles and Engines; Guidance on EPA's Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... production is accounted for in API's certification program and that the follow-up audit program is showing... Selective Catalytic Reduction Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Request for... reduction (SCR) technology to meet emission standards for oxides of nitrogen (NO X ). This draft guidance...

24 CFR 200.935 - Administrator qualifications and procedures for HUD building products certification programs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... guidelines in any quality assurance review: (1) ASQC Q9000-1-1994 Quality Management and Quality Assurance... Systems—Model for Quality Assurance in Final Inspection and Test; (5) ASQC Q9004-1-1994 Quality Management... in interpreting testing standards, test methods, evaluating test reports and quality control programs...

Remote monitoring and Tennessee Valley Authority programs

NASA Technical Reports Server (NTRS)

Stevens, A. R.; Voss, A. W.

1977-01-01

The Tennessee Valley Authority was created in 1933 as a resource development agency and was charged with the basic mission of improving the economy of a depressed region through power production, flood control, and navigation. Those programs which availed themselves of remotely monitored data, either directly or indirectly supporting this mission, were examined.

Toward full life cycle control: Adding maintenance measurement to the SEL

NASA Technical Reports Server (NTRS)

Rombach, H. Dieter; Ulery, Bradford T.; Valett, Jon D.

1992-01-01

Organization-wide measurement of software products and processes is needed to establish full life cycle control over software products. The Software Engineering Laboratory (SEL)--a joint venture between NASA GSFC, the University of Maryland, and Computer Sciences Corporation--started measurement of software development more than 15 years ago. Recently, the measurement of maintenance was added to the scope of the SEL. In this article, the maintenance measurement program is presented as an addition to the already existing and well-established SEL development measurement program and evaluated in terms of its immediate benefits and long-term improvement potential. Immediate benefits of this program for the SEL include an increased understanding of the maintenance domain, the differences and commonalities between development and maintenance, and the cause-effect relationships between development and maintenance. Initial results from a sample maintenance study are presented to substantiate these benefits. The long-term potential of this program includes the use of maintenance baselines to better plan and manage future projects and to improve development and maintenance practices for future projects wherever warranted.

Assuring reliability program effectiveness.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1973-01-01

An attempt is made to provide simple identification and description of techniques that have proved to be most useful either in developing a new product or in improving reliability of an established product. The first reliability task is obtaining and organizing parts failure rate data. Other tasks are parts screening, tabulation of general failure rates, preventive maintenance, prediction of new product reliability, and statistical demonstration of achieved reliability. Five principal tasks for improving reliability involve the physics of failure research, derating of internal stresses, control of external stresses, functional redundancy, and failure effects control. A final task is the training and motivation of reliability specialist engineers.

Improvement of mass-rearing procedures for an olive fruit fly parasitoid – duration of exposure to hosts affects production of Psyttalia lounsburyi

USDA-ARS?s Scientific Manuscript database

The olive fruit fly, Bactrocera oleae (Diptera: Tephritidae), causes severe economic damage in California. Control of this fly is currently limited to pesticides. The USDA-ARS European Biological Control Laboratory in Montpellier, France established a classical biological control program nearly 15 y...

The programming language HAL: A specification

NASA Technical Reports Server (NTRS)

1971-01-01

HAL accomplishes three significant objectives: (1) increased readability, through the use of a natural two-dimensional mathematical format; (2) increased reliability, by providing for selective recognition of common data and subroutines, and by incorporating specific data-protect features; (3) real-time control facility, by including a comprehensive set of real-time control commands and signal conditions. Although HAL is designed primarily for programming on-board computers, it is general enough to meet nearly all the needs in the production, verification and support of aerospace, and other real-time applications.

Step 1: Human System Integration Simulation and Flight Test Progress Report

NASA Technical Reports Server (NTRS)

2005-01-01

The Access 5 Human Systems Integration Work Package produced simulation and flight demonstration planning products for use throughout the program. These included: Test Objectives for Command, Control, Communications; Pilot Questionnaire for Command, Control, Communications; Air Traffic Controller Questionnaire for Command, Control, Communications; Test Objectives for Collision Avoidance; Pilot Questionnaire for Collision Avoidance; Plans for Unmanned Aircraft Systems Control Station Simulations Flight Requirements for the Airspace Operations Demonstration

40 CFR 63.9020 - What performance tests and other procedures must I use?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production...) If you use a caustic scrubber control device or a water scrubber control device, the design...

USDA Mosquito Control Product Research for the US Military

USDA-ARS?s Scientific Manuscript database

New techniques that were developed at the USDA to protect deployed military troops from the threat of vector-borne diseases and are also applicable for use by civilian mosquito control program use are described. Techniques to be illustrated include: (1) novel military personal protection methods, (2...

Transcriptional analysis of product-concentration driven changes in cellular programs of recombinant Clostridium acetobutylicumstrains.

PubMed

Tummala, Seshu B; Junne, Stefan G; Paredes, Carlos J; Papoutsakis, Eleftherios T

2003-12-30

Antisense RNA (asRNA) downregulation alters protein expression without changing the regulation of gene expression. Downregulation of primary metabolic enzymes possibly combined with overexpression of other metabolic enzymes may result in profound changes in product formation, and this may alter the large-scale transcriptional program of the cells. DNA-array based large-scale transcriptional analysis has the potential to elucidate factors that control cellular fluxes even in the absence of proteome data. These themes are explored in the study of large-scale transcriptional analysis programs and the in vivo primary-metabolism fluxes of several related recombinant C. acetobutylicum strains: C. acetobutylicum ATCC 824(pSOS95del) (plasmid control; produces high levels of butanol snd acetone), 824(pCTFB1AS) (expresses antisense RNA against CoA transferase (ctfb1-asRNA); produces very low levels of butanol and acetone), and 824(pAADB1) (expresses ctfb1-asRNA and the alcohol-aldehyde dahydrogenase gene (aad); produce high alcohol and low acetone levels). DNA-array based transcriptional analysis revealed that the large changes in product concentrations (snd notably butanol concentration) due to ctfb1-asRNA expression alone and in combination with aad overexpression resulted in dramatic changes of the cellular transcriptome. Cluster analysis and gene expression patterns of established and putative operons involved in stress response, motility, sporulation, and fatty-acid biosynthesis indicate that these simple genetic changes dramatically alter the cellular programs of C. acetobutylicum. Comparison of gene expression and flux analysis data may point to possible flux-controling steps and suggest unknown regulatory mechanisms. Copyright 2003; Wiley Periodicals, Inc.

The effect of a healthy school tuck shop program on the access of students to healthy foods.

PubMed

Kim, Kirang; Hong, Seo Ah; Yun, Sung Ha; Ryou, Hyun Joo; Lee, Sang Sun; Kim, Mi Kyung

2012-04-01

The objective of this study was to evaluate the effect of a healthy school tuck shop program, developed as a way of creating a healthy and nutritional school environment, on students' access to healthy foods. Five middle schools and four high schools (775 students) participated in the healthy school tuck shop program, and nine schools (1,282 students) were selected as the control group. The intervention program included restriction of unhealthy foods sold in tuck shops, provision of various fruits, and indirect nutritional education with promotion of healthy food products. The program evaluation involved the examination of students' purchase and intake patterns of healthy foods, satisfaction with the available foodstuffs, and utilization of and satisfaction with nutritional educational resources. Our results indicated that among of the students who utilized the tuck shop, about 40% purchased fruit products, showing that availability of healthy foods in the tuck shop increased the accessibility of healthy foods for students. Overall food purchase and intake patterns did not significantly change during the intervention period. However, students from the intervention schools reported higher satisfaction with the healthy food products sold in the tuck shop than did those from the control schools (all P < 0.001), and they were highly satisfied with the educational resources provided to them. In conclusion, the healthy school tuck shop program had a positive effect on the accessibility of healthy food. The findings suggest that a healthy school tuck shop may be an effective environmental strategy for promoting students' access to healthy foods.

The effect of a healthy school tuck shop program on the access of students to healthy foods

PubMed Central

Kim, Kirang; Hong, Seo Ah; Yun, Sung Ha; Ryou, Hyun Joo; Lee, Sang Sun

2012-01-01

The objective of this study was to evaluate the effect of a healthy school tuck shop program, developed as a way of creating a healthy and nutritional school environment, on students' access to healthy foods. Five middle schools and four high schools (775 students) participated in the healthy school tuck shop program, and nine schools (1,282 students) were selected as the control group. The intervention program included restriction of unhealthy foods sold in tuck shops, provision of various fruits, and indirect nutritional education with promotion of healthy food products. The program evaluation involved the examination of students' purchase and intake patterns of healthy foods, satisfaction with the available foodstuffs, and utilization of and satisfaction with nutritional educational resources. Our results indicated that among of the students who utilized the tuck shop, about 40% purchased fruit products, showing that availability of healthy foods in the tuck shop increased the accessibility of healthy foods for students. Overall food purchase and intake patterns did not significantly change during the intervention period. However, students from the intervention schools reported higher satisfaction with the healthy food products sold in the tuck shop than did those from the control schools (all P < 0.001), and they were highly satisfied with the educational resources provided to them. In conclusion, the healthy school tuck shop program had a positive effect on the accessibility of healthy food. The findings suggest that a healthy school tuck shop may be an effective environmental strategy for promoting students' access to healthy foods. PMID:22586503

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burger, J.R.

Loss control, both as a phrase and a concept, isn't used very widely in the U.S. coal industry although a U.S. manufacturer has cut accidents 71% and increased productivity 40% using the system. Safety is a part of the loss control concept, but it goes beyond traditional accident and illness prevention to become management control of anything that can result in loss or property damage. This includes what ILCI calls incidents, that is, ''any undesired or unwanted event that could (or does) degrade the efficiency of the business operation.'' These incidents could be accidents, quality or production problems, or evenmore » security breaches (such as thefts). So while safety is always a basic element-loss control also includes absenteeism control, security, fire prevention and industrial hygiene, since they're all interrelated disciplines for reducing loss. A baseline evaluation is followed by recommendations and guidance in self-sustaining corrective measures. This program would cost about $3,500 the first year. Possibly this approach is not used in the U.S. because miners feel that with all the legislation and regulation of the industry no further program is needed.« less

NASA Project Planning and Control Handbook

NASA Technical Reports Server (NTRS)

Moreland, Robert; Claunch, Cathy L.

2016-01-01

This handbook provides an overview of the fundamental principles and explains the functions and products that go into project planning and control. The 2010 Interim Results of the NASA Program Planning and Control (PPC) Study identified seven categories of activities for PPC, and those provide the basis for the seven functions described in this handbook. This handbook maps out the interfaces and interactions between PPC functions, as well as their external interfaces. This integration of information and products within and between functions is necessary to form the whole picture of how a project is progressing. The handbook descriptions are meant to facilitate consistent, common, and comprehensive approaches for providing valued analysis, assessment, and evaluation focused on the project level at NASA. The handbook also describes activities in terms of function rather than the job title or the specific person or organization responsible for the activity, which could differ by Center or size of a project. This handbook is primarily guidance for project planning and control: however, the same principles apply to programs and generally apply to institutional planning and control.

7 CFR 718.6 - Controlled substance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING QUOTAS, ACREAGE ALLOTMENTS, AND PRODUCTION ADJUSTMENT PROVISIONS APPLICABLE TO MULTIPLE PROGRAMS... four succeeding crop years, for any of the following USDA benefits: (i) Any payments or benefits under...

9 CFR 318.311 - Recall procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... available to Program employees for review. (Approved by the Office of Management and Budget under control...

9 CFR 318.311 - Recall procedure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... available to Program employees for review. (Approved by the Office of Management and Budget under control...

9 CFR 318.311 - Recall procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... available to Program employees for review. (Approved by the Office of Management and Budget under control...

9 CFR 318.311 - Recall procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... available to Program employees for review. (Approved by the Office of Management and Budget under control...

9 CFR 318.311 - Recall procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND... available to Program employees for review. (Approved by the Office of Management and Budget under control...

40 CFR 146.7 - Corrective action.

Code of Federal Regulations, 2014 CFR

2014-07-01

... INJECTION CONTROL PROGRAM: CRITERIA AND STANDARDS General Provisions § 146.7 Corrective action. In...; (b) Nature of native fluids or by-products of injection; (c) Potentially affected population; (d...

Solid State Lighting Program (Falcon)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meeks, Steven

2012-06-30

Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioningmore » which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.« less

PRN 94-7: Label Improvement Program for the Revision of Use Directions for Commensal Rodenticides and Statement of the Agency's Policies on the Use of Rodenticide Bait Stations

EPA Pesticide Factsheets

This Notice requires registrants of certain pesticide products claimed to control commensal rodents and registered under FIFRA to revise the labeling of such products to bear certain statements concerning tamper-resistant bait stations.

Increased Use of Productivity Management Can Help Control Government Costs.

DTIC Science & Technology

1983-11-10

estimated that 34 percent of agency spend- ing reductions made to balance the budget in fiscal year 1984 can be attributed to the productivity program. The...result in the services 5. [] use of employee incentives (9) of some employees no longer being required in the unit in which they 6. [) quality of worklife

77 FR 69924 - Request for Comments on a Renewal of a Previously Approved Information Collection: Production...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

...: Kenneth R. Katz, Fuel Economy Division, Office of International Policy, Fuel Economy and Consumer Programs... Parts 531 and 533 Passenger Car Average Fuel Economy Standards--Model Years 2016-2025; Light Truck Average Fuel Economy Standards--Model Years 2016-2025; Production Plan Data. OMB Control Number: 2127-0655...

75 FR 55944 - Walnuts Grown in California; Decreased Assessment Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... Expenses/Annual Audit.. 161,000 208,000 Office Expenses 123,750 118,850 Program Expenses Including Research: Controlled Purchases 5,000 20,000 Crop Acreage Survey 0 95,000 Crop Estimate 120,000 105,000 Production Research Director.... 80,000 88,500 Production Research 725,000 1,042,000 Grades and Standards Research...

76 FR 67436 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Pulp and Paper Production... FURTHER INFORMATION CONTACT: Learia Williams, Monitoring, Assistance, and Media Programs Division, Office... Production (Renewal). ICR Numbers: EPA ICR Number 1657.07, OMB Control Number 2060-0387. ICR Status: This ICR...

7 CFR 205.601 - Synthetic substances allowed for use in organic crop production.

Code of Federal Regulations, 2010 CFR

2010-01-01

... or soil. (2) Boric acid—structural pest control, no direct contact with organic food or crops. (3... 7 Agriculture 3 2010-01-01 2010-01-01 false Synthetic substances allowed for use in organic crop... (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Administrative The National List...

Integrated modeling of advanced optical systems

NASA Astrophysics Data System (ADS)

Briggs, Hugh C.; Needels, Laura; Levine, B. Martin

1993-02-01

This poster session paper describes an integrated modeling and analysis capability being developed at JPL under funding provided by the JPL Director's Discretionary Fund and the JPL Control/Structure Interaction Program (CSI). The posters briefly summarize the program capabilities and illustrate them with an example problem. The computer programs developed under this effort will provide an unprecedented capability for integrated modeling and design of high performance optical spacecraft. The engineering disciplines supported include structural dynamics, controls, optics and thermodynamics. Such tools are needed in order to evaluate the end-to-end system performance of spacecraft such as OSI, POINTS, and SMMM. This paper illustrates the proof-of-concept tools that have been developed to establish the technology requirements and demonstrate the new features of integrated modeling and design. The current program also includes implementation of a prototype tool based upon the CAESY environment being developed under the NASA Guidance and Control Research and Technology Computational Controls Program. This prototype will be available late in FY-92. The development plan proposes a major software production effort to fabricate, deliver, support and maintain a national-class tool from FY-93 through FY-95.

Managing computer-controlled operations

NASA Technical Reports Server (NTRS)

Plowden, J. B.

1985-01-01

A detailed discussion of Launch Processing System Ground Software Production is presented to establish the interrelationships of firing room resource utilization, configuration control, system build operations, and Shuttle data bank management. The production of a test configuration identifier is traced from requirement generation to program development. The challenge of the operational era is to implement fully automated utilities to interface with a resident system build requirements document to eliminate all manual intervention in the system build operations. Automatic update/processing of Shuttle data tapes will enhance operations during multi-flow processing.

LIEKKI -- Combustion and gasification research in Finland 1988--1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hupa, M.; Matinlinna, J.

1996-12-31

The objective of the Combustion and Gasification Research Program LIEKKI is to develop environmentally sound energy production techniques that are based on combustion and/or gasification. The research supports equipment manufacturers in Finland as they develop and improve their top export products, such as the fluidized bed boilers, black liquor recovery boilers, and heavy diesel power plants. The research is also heavily focused on new techniques not yet on the market, ones with higher efficiency of electricity production and, simultaneously, significantly simpler emission control systems. The most important concepts here include combustors or gasifiers based on fluidized bed technology at elevatedmore » pressures. At present the LIEKKI program includes 49 research projects and it connects some 150 scientists and research engineers in the universities and research centers of Finland. The overall annual budget of the program has been around 10 Mill. USD, co-funded by the industry and the government agency TEKES (Technology Development Centre) in Finland. The program is coordinated by Aabo Akademi University in Turku, Finland.« less

The Ecological Areawide Management (TEAM) of leafy spurge program of the United States Department of Agriculture-Agricultural Research Service.

PubMed

Anderson, Gerald L; Prosser, Chad W; Wendel, Lloyd E; Delfosse, Ernest S; Faust, Robert M

2003-01-01

The Ecological Areawide Management (TEAM) of Leafy Spurge program was developed to focus research and control efforts on a single weed, leafy spurge, and demonstrate the effectiveness of a coordinated, biologically based, integrated pest management program (IPM). This was accomplished through partnerships and teamwork that clearly demonstrated the advantages of the biologically based IPM approach. However, the success of regional weed control programs horizontally across several states and provinces also requires a vertical integration of several sectors of society. Awareness and education are the essential elements of vertical integration. Therefore, a substantial effort was made to produce a wide variety of information products specifically designed to educate different segments of society. During its tenure, land managers and agency decision makers have seen the potential of using the TEAM approach to accelerate the regional control of leafy spurge. The example set by the TEAM organization and participants is viewed as a model for future weed-control efforts.

ITERATIVE EVALUATION IN A MOBILE COUNSELING AND TESTING PROGRAM TO REACH PEOPLE OF COLOR AT RISK FOR HIV—NEW STRATEGIES IMPROVE PROGRAM ACCEPTABILITY, EFFECTIVENESS, AND EVALUATION CAPABILITIES

PubMed Central

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2016-01-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program’s results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention’s HIV testing recommendations. PMID:21689041

Organizational determinants of efficiency and effectiveness in mental health partial care programs.

PubMed Central

Schinnar, A P; Kamis-Gould, E; Delucia, N; Rothbard, A B

1990-01-01

The use of partial care as a treatment modality for mentally ill patients, particularly the chronically mentally ill, has greatly increased. However, research into what constitutes a "good" program has been scant. This article reports on an evaluation study of staff productivity, cost efficiency, and service effectiveness of adult partial care programs carried out in New Jersey in fiscal year 1984/1985. Five program performance indexes are developed based on comparisons of multiple measures of resources, service activities, and client outcomes. These are used to test various hypotheses regarding the effect of organizational and fiscal variables on partial care program efficiency and effectiveness. The four issues explored are: auspices, organizational complexity, service mix, and fiscal control by the state. These were found to explain about half of the variance in program performance. In addition, partial care programs demonstrating midlevel performance with regard to productivity and efficiency were observed to be the most effective, implying a possible optimal level of efficiency at which effectiveness is maximized. PMID:2113046

An assessment of the impact of the Department of Defense very high speed integrated circuit program

NASA Astrophysics Data System (ADS)

1982-01-01

The technical and economic effects of the Department of Defense's (DoD) development program for very-high-speed integrated circuits (VHSIC) are examined. The probable effects of this program on the domestic aspects and international position of the integrated-circuit (IC) industry as they relate to the interests of the general public and the DoD are considered. The report presents a review of the unique DoD needs that motivate VHSIC research and development; an estimate of the degree of which these needs are likely to be met by the VHSIC program; a discussion of the effects of the program's demands for manpower, materials, and design and processing technologies; the problems connected with the program's technology export controls; and an assessment of the impact of the program on the structure of the U.S. integrated-circuit industry, its continued development and production of civilian consumer products, and its international competitive position.

75 FR 4539 - Energy Conservation Program for Consumer Products: Publication of the Petition for Waiver and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... procedure for determining the energy consumption of electric refrigerators and refrigerator-freezers. The... condensation. The existing test procedure does not take humidity or adaptive control technology into account. Therefore, Electrolux has suggested an alternate test procedure that takes adaptive control technology into...

The National Shipbuilding Research Program. Design for Production Manual 2nd Edition

DTIC Science & Technology

1999-07-01

New York, 1979 Montgomery, Douglas C., Introduction to Statistical Quality Control, 3rd Edition, John Wiley & Sons, New York, 1997 Ishikawa , Kaoru ...references: Feigenbaum, A.V., Total Quality Control: Engineering and Management, 3rd edition, New York McGraw Hill, 1983. Ishikawa , Kaouro., Guide to

40 CFR 82.8 - Grant of essential use allowances and critical use allowances.

Code of Federal Regulations, 2013 CFR

2013-07-01

... America, Inc. Prosource One Bill Clark Pest Control, Inc. Helena Chemical Co. Trical Inc. Burnside... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls... Obstructive Pulmonary Disease Company Chemical 2010 Quantity(metric tons) Armstrong CFC-11 or CFC-12 or CFC...

40 CFR 82.8 - Grant of essential use allowances and critical use allowances.

Code of Federal Regulations, 2012 CFR

2012-07-01

... America, Inc. Prosource One Bill Clark Pest Control, Inc. Helena Chemical Co. Trical Inc. Burnside... (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls... Obstructive Pulmonary Disease Company Chemical 2010 Quantity(metric tons) Armstrong CFC-11 or CFC-12 or CFC...

Hyperspectral imaging for differentiating glyphosate-resistant and glyphosate-susceptible Italian Ryegrass

USDA-ARS?s Scientific Manuscript database

Glyphosate is widely used in row crop weed control programs of glyphosate-resistant (GR) crops. With the accumulation of glyphosate use, several weeds have evolved resistance to glyphosate. In order to control GR weeds for profitable crop production, it is critical to first identify them in crop fie...

75 FR 65652 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... Certain Products Containing Interactive Program Guide and Parental Controls Technology, DN 2763; the... guide and parental controls technology. The complaint names as respondents Toshiba Corp. of Minato-ku.../handbook_on_electronic_filing.pdf ). Persons with questions regarding electronic filing should contact the...

78 FR 62970 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... of showerhead and hand-held showerhead; removal of body sprays from the proposed showerhead... standardized test method to be used when verifying the mechanical retention of a showerhead flow control insert... Faucets 1. Definitions 2. Test Procedure for Showerhead Flow Control Insert [[Page 62971

Recent progress in a classical biological control program for olive fruit fly in California

USDA-ARS?s Scientific Manuscript database

The olive fruit fly, Bactrocera oleae (Diptera: Tephritidae), causes severe damage to olive production worldwide. Control of olive fruit fly typically relies on pesticides, and under such conditions the impact of natural enemies is relatively low. About 15 years ago, the USDA-ARS European Biologic...

Automated generation of weld path trajectories.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sizemore, John M.; Hinman-Sweeney, Elaine Marie; Ames, Arlo Leroy

2003-06-01

AUTOmated GENeration of Control Programs for Robotic Welding of Ship Structure (AUTOGEN) is software that automates the planning and compiling of control programs for robotic welding of ship structure. The software works by evaluating computer representations of the ship design and the manufacturing plan. Based on this evaluation, AUTOGEN internally identifies and appropriately characterizes each weld. Then it constructs the robot motions necessary to accomplish the welds and determines for each the correct assignment of process control values. AUTOGEN generates these robot control programs completely without manual intervention or edits except to correct wrong or missing input data. Most shipmore » structure assemblies are unique or at best manufactured only a few times. Accordingly, the high cost inherent in all previous methods of preparing complex control programs has made robot welding of ship structures economically unattractive to the U.S. shipbuilding industry. AUTOGEN eliminates the cost of creating robot control programs. With programming costs eliminated, capitalization of robots to weld ship structures becomes economically viable. Robot welding of ship structures will result in reduced ship costs, uniform product quality, and enhanced worker safety. Sandia National Laboratories and Northrop Grumman Ship Systems worked with the National Shipbuilding Research Program to develop a means of automated path and process generation for robotic welding. This effort resulted in the AUTOGEN program, which has successfully demonstrated automated path generation and robot control. Although the current implementation of AUTOGEN is optimized for welding applications, the path and process planning capability has applicability to a number of industrial applications, including painting, riveting, and adhesive delivery.« less

[Design of an HACCP program for a cocoa processing facility].

PubMed

López D'Sola, Patrizia; Sandia, María Gabriela; Bou Rached, Lizet; Hernández Serrano, Pilar

2012-12-01

The HACCP plan is a food safety management tool used to control physical, chemical and biological hazards associated to food processing through all the processing chain. The aim of this work is to design a HACCP Plan for a Venezuelan cocoa processing facility.The production of safe food products requires that the HACCP system be built upon a solid foundation of prerequisite programs such as Good Manufacturing Practices (GMP) and Sanitation Standard Operating Procedures (SSOP). The existence and effectiveness of these prerequisite programs were previously assessed.Good Agriculture Practices (GAP) audit to cocoa nibs suppliers were performed. To develop the HACCP plan, the five preliminary tasks and the seven HACCP principles were accomplished according to Codex Alimentarius procedures. Three Critical Control Points (CCP) were identified using a decision tree: winnowing (control of ochratoxin A), roasting (Salmonella control) and metallic particles detection. For each CCP, Critical limits were established, the Monitoring procedures, Corrective actions, Procedures for Verification and Documentation concerning all procedures and records appropriate to these principles and their application was established. To implement and maintain a HACCP plan for this processing plant is suggested. Recently OchratoxinA (OTA) has been related to cocoa beans. Although the shell separation from the nib has been reported as an effective measure to control this chemical hazard, ochratoxin prevalence study in cocoa beans produced in the country is recommended, and validate the winnowing step as well

An Overview of the Characterization of the Space Launch Vehicle Aerodynamic Environments

NASA Technical Reports Server (NTRS)

Blevins, John A.; Campbell, John R., Jr.; Bennett, David W.; Rausch, Russ D.; Gomez, Reynaldo J.; Kiris, Cetin C.

2014-01-01

Aerodynamic environments are some of the rst engineering data products that are needed to design a space launch vehicle. These products are used in performance predic- tions, vehicle control algorithm design, as well as determing loads on primary and secondary structures in multiple discipline areas. When the National Aeronautics and Space Admin- istration (NASA) Space Launch System (SLS) Program was established with the goal of designing a new, heavy-lift launch vehicle rst capable of lifting the Orion Program Multi- Purpose Crew Vehicle (MPCV) to low-earth orbit and preserving the potential to evolve the design to a 200 metric ton cargo launcher, the data needs were no di erent. Upon commencement of the new program, a characterization of aerodynamic environments were immediately initiated. In the time since, the SLS Aerodynamics Team has produced data describing the majority of the aerodynamic environment de nitions needed for structural design and vehicle control under nominal ight conditions. This paper provides an overview of select SLS aerodynamic environments completed to date.

A review of the incidence and transmission of Listeria monocytogenes in ready-to-eat products in retail and food service environments.

PubMed

Lianou, Alexandra; Sofos, John N

2007-09-01

Contamination of ready-to-eat products with Listeria monocytogenes may occur at several stages before consumption. Accessibility to the public and relatively limited control interventions at retail and food service establishments (compared with the processing sector of the food industry) and the lack of a specific regulatory framework increase the likelihood of introduction of this pathogen into some foods in these establishments. This review is a compilation of available information on the incidence and transmission of L. monocytogenes through ready-to-eat products at the retail and food service level. The potential transmission of L. monocytogenes within retail and food service operations has been indicated in epidemiological investigations and by survey data. Potential sources of the organism in these operations include the environment, food handlers, and incoming raw ingredients or processed products that have become contaminated after the lethality treatment at the manufacturing facility. L. monocytogenes may be present at retail and food service establishments in various ready-to-eat products, both prepackaged and those packaged in the store, and occasionally at high concentrations. This issue dictates the need for development and application of effective control measures, and potential control approaches are discussed here. Good manufacturing practices, appropriate cleaning, sanitation and hygiene programs, and temperature control required for prevention or inhibition of growth of the pathogen to high levels are critical for control of L. monocytogenes in the retail and food service sector. A comprehensive food safety system designed to be functional in retail and food service operations and based on the philosophy of hazard analysis and critical control point systems and a series of sound prerequisite programs can provide effective control of L. monocytogenes in these environments. However, competent delivery of food safety education and training to retail and food service managers and food handlers must be in place for successful implementation of such a system.

Design Control Systems of Human Machine Interface in the NTVS-2894 Seat Grinder Machine to Increase the Productivity

NASA Astrophysics Data System (ADS)

Ardi, S.; Ardyansyah, D.

2018-02-01

In the Manufacturing of automotive spare parts, increased sales of vehicles is resulted in increased demand for production of engine valve of the customer. To meet customer demand, we carry out improvement and overhaul of the NTVS-2894 seat grinder machine on a machining line. NTVS-2894 seat grinder machine has been decreased machine productivity, the amount of trouble, and the amount of downtime. To overcome these problems on overhaul the NTVS-2984 seat grinder machine include mechanical and programs, is to do the design and manufacture of HMI (Human Machine Interface) GP-4501T program. Because of the time prior to the overhaul, NTVS-2894 seat grinder machine does not have a backup HMI (Human Machine Interface) program. The goal of the design and manufacture in this program is to improve the achievement of production, and allows an operator to operate beside it easier to troubleshoot the NTVS-2894 seat grinder machine thereby reducing downtime on the NTVS-2894 seat grinder machine. The results after the design are HMI program successfully made it back, machine productivity increased by 34.8%, the amount of trouble, and downtime decreased 40% decrease from 3,160 minutes to 1,700 minutes. The implication of our design, it could facilitate the operator in operating machine and the technician easer to maintain and do the troubleshooting the machine problems.

Snapshot of Active Flow Control Research at NASA Langley

NASA Technical Reports Server (NTRS)

Washburn, A. E.; Gorton, S. Althoff; Anders, S. G.

2002-01-01

NASA Langley is aggressively investigating the potential advantages of active flow control as opposed to more traditional aerodynamic techniques. Many of these techniques will be blended with advanced materials and structures to further enhance payoff. Therefore a multi-disciplinary approach to technology development is being attempted that includes researchers from the more historical disciplines of fluid mechanics. acoustics, material science, structural mechanics, and control theory. The overall goals of the topics presented are focused on advancing the state of knowledge and understanding of controllable fundamental mechanisms in fluids rather than on specific engineering problems. An organizational view of current research activities at NASA Langley in active flow control as supported by several programs such as the Morphing Project under Breakthrough Vehicle Technologies Program (BVT). the Ultra-Efficient Engine Technology Program (UEET), and the 21st Century Aircraft Technology Program (TCAT) is presented. On-center research as well as NASA Langley funded contracts and grants are discussed at a relatively high level. The products of this research, as part of the fundamental NASA R and D (research and development) program. will be demonstrated as either bench-top experiments, wind-tunnel investigations, or in flight tests. Later they will be transferred to more applied research programs within NASA, DOD (Department of Defense), and U.S. industry.

Media Literacy Education for Elementary School Substance Use Prevention: Study of Media Detective

PubMed Central

Kupersmidt, Janis B.; Scull, Tracy M.; Austin, Erica Weintraub

2017-01-01

OBJECTIVES Media Detective is a 10-lesson elementary school substance use prevention program developed on the basis of the message interpretation processing model designed to increase children’s critical thinking skills about media messages and reduce intent to use tobacco and alcohol products. The purpose of this study was to conduct a short-term, randomized, controlled trial to evaluate the effectiveness of Media Detective for achieving these goals. METHODS Elementary schools were randomly assigned to conditions to either receive the Media Detective program (n = 344) or serve in a waiting list control group (n = 335). RESULTS Boys in the Media Detective group reported significantly less interest in alcohol-branded merchandise than boys in the control group. Also, students who were in the Media Detective group and had used alcohol or tobacco in the past reported significantly less intention to use and more self-efficacy to refuse substances than students who were in the control group and had previously used alcohol or tobacco. CONCLUSIONS This evaluation provides evidence that Media Detective can be effective for substance use prevention in elementary school–aged children. Notably, media-related cognitions about alcohol and tobacco products are malleable and relevant to the development and maintenance of substance use behaviors during late childhood. The findings from this study suggest that media literacy– based interventions may serve as both a universal and a targeted prevention program that has potential for assisting elementary school children in making healthier, more informed decisions about use of alcohol and tobacco products. PMID:20732940

Investigate Methods of Improving Production Throughput in a Shipyard (The National Shipbuilding Research Program)

DTIC Science & Technology

1995-09-01

New Global Competition” ...10 “New Systems for Process Control and Product Costing ” . . . 11 “Performance Measurement Systems for the Future”, should...Selected Highlights: Page 53-World Class - Definition and applicable discussions. “Its clear that yesterdays cost systems don’t work in todays...Why conventional cost systems fail Indirect, No information about activities, Too late. Plant activities only, Inaccurate product costs , No customer

Active vibration control testing of the SPICES program: final demonstration article

NASA Astrophysics Data System (ADS)

Dunne, James P.; Jacobs, Jack H.

1996-05-01

The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

9 CFR 145.93 - Terminology and classification; flocks and products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Influenza Clean. This program is intended to be the basis from which the breeding-hatchery industry may conduct a program for the prevention and control of the H5/H7 subtypes of avian influenza. It is intended to determine the presence of the H5/H7 subtypes of avian influenza in meat-type waterfowl breeding...

9 CFR 145.93 - Terminology and classification; flocks and products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Influenza Clean. This program is intended to be the basis from which the breeding-hatchery industry may conduct a program for the prevention and control of the H5/H7 subtypes of avian influenza. It is intended to determine the presence of the H5/H7 subtypes of avian influenza in meat-type waterfowl breeding...

9 CFR 145.93 - Terminology and classification; flocks and products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Influenza Clean. This program is intended to be the basis from which the breeding-hatchery industry may conduct a program for the prevention and control of the H5/H7 subtypes of avian influenza. It is intended to determine the presence of the H5/H7 subtypes of avian influenza in meat-type waterfowl breeding...

The status of tree improvement programs for northern tree species

Treesearch

David S. Canavera

1977-01-01

Forest tree improvement research and application in the Northeast is reviewed in the perspective of past development and future needs. Control over provenance selection can provide the best quality seed for today's reforestation programs. Future supplies of seed must come from seed orchards if forest land owners are to attain the maximum production per unit area...

Design of belt conveyor electric control device based on CC-link bus

NASA Astrophysics Data System (ADS)

Chen, Goufen; Zhan, Minhua; Li, Jiehua

2016-01-01

In view of problem of the existing coal mine belt conveyor is no field bus communication function, two levels belt conveyor electric control system design is proposed based on field bus. Two-stage belt conveyor electric control system consists of operation platform, PLC control unit, various sensors, alarm device and the water spraying device. The error protection is realized by PLC programming, made use of CC-Link bus technology, the data share and the cooperative control came true between host station and slave station. The real-time monitor was achieved by the touch screen program. Practical application shows that the system can ensure the coalmine production, and improve the automatic level of the coalmine transport equipment.

The impact of condom prices on sales in social marketing programs.

PubMed

Harvey, P D

1994-01-01

The issue of pricing contraceptives in family planning programs is becoming more and more important. What is the relationship between consumer prices and demand, and how can we strike the correct balance between the two? This report examines the correlation between consumer prices for condoms, expressed as a percentage of per-capita gross national product, and per-capita sales of condoms in 24 social marketing programs. The correlation that emerges is strong and negative: Even when the data are controlled for age of program and other independent variables, there is a clear negative correlation between prices and contraceptive sales in these programs. The conclusion is clear that condom prices must be set very low--well below the equivalent of 1 percent of per-capita gross national product for a year's supply--in order to achieve satisfactory prevalence for condoms in either a family-planning or an AIDS-prevention context.

Cancer Control Research Training for Native Researchers: A Model for Development of Additional Native Researcher Training Programs

ERIC Educational Resources Information Center

Becker, Thomas M.; Dunn, Esther; Tom-Orme, Lillian; Joe, Jennie

2005-01-01

Several social and biological scientists who have Native status are engaged in productive research careers, but the encouragement that has been offered to Native students to formulate career goals devoted to cancer etiology or cancer control in Native peoples has had limited success. Hence, the Native Researchers' Cancer Control Training Program…

EXPERIMENTAL ANALYSIS OF THE CONTROL OF SPEECH PRODUCTION AND PERCEPTION. PROGRESS REPORT NO. I, FEBRUARY 1--SEPTEMBER 1, 1961.

ERIC Educational Resources Information Center

LANE, HARLAN; AND OTHERS

THIS DOCUMENT IS THE FIRST IN A SERIES REPORTING ON PROGRESS OF AN EXPERIMENTAL RESEARCH PROGRAM IN SPEECH CONTROL. THE TOPICS DISCUSSED ARE--(1) THE DISCONTINUITY OF AUDITORY DISCRIMINATION LEARNING IN HUMAN ADULTS, (2) DISCRIMINATIVE CONTROL OF CONCURRENT RESPONSES--THE RELATIONS AMONG RESPONSE FREQUENCY, LATENCY, AND TOPOGRAPHY IN AUDITORY…

Evaluating the impact of a disease management program for chronic complex conditions at two large northeast health plans using a control group methodology.

PubMed

Schwerner, Henry; Mellody, Timothy; Goldstein, Allan B; Wansink, Daryl; Sullivan, Virginia; Yelenik, Stephan N; Charlton, Warwick; Lloyd, Kelley; Courtemanche, Ted

2006-02-01

The objective of this study was to observe trends in payer expenditures for plan members with one of 14 chronic, complex conditions comparing one group with a disease management program specific to their condition (the intervention group) and the other with no specific disease management program (the control group) for these conditions. The authors used payer claims and membership data to identify members eligible for the program in a 12-month baseline year (October 2001 to September 2002) and a subsequent 12-month program year (October 2002 to September 2003). Two payers were analyzed: one health plan with members primarily in New Jersey (AmeriHealth New Jersey [AHNJ]), where the disease management program was offered, and one affiliated large plan with members primarily in the metro Philadelphia area, where the program was not offered. The claims payment policy for both plans is identical. Intervention and control groups were analyzed for equivalence. The analysis was conducted in both groups over identical time periods. The intervention group showed statistically significant (p < 0.01) differences in total paid claims trend and expenditures when compared to the control group. Intervention group members showed a reduction in expenditures of -8%, while control group members showed an increase of +10% over identical time periods. Subsequent analyses controlling for outliers and product lines served to confirm the overall results. The disease management program is likely responsible for the observed difference between the intervention and control group results. A well-designed, targeted disease management program offered by a motivated, supportive health plan can play an important role in cost improvement strategies for members with complex, chronic conditions.

Yield of glyphosate-resistant sugar beets and efficiency of weed management systems with glyphosate and conventional herbicides under German and Polish crop production.

PubMed

Nichterlein, Henrike; Matzk, Anja; Kordas, Leszek; Kraus, Josef; Stibbe, Carsten

2013-08-01

In sugar beet production, weed control is one of the most important and most expensive practices to ensure yield. Since glyphosate-resistant sugar beets are not yet approved for cultivation in the EU, little commercial experience exists with these sugar beets in Europe. Experimental field trials were conducted at five environments (Germany, Poland, 2010, 2011) to compare the effects of glyphosate with the effects of conventional weed control programs on the development of weeds, weed control efficiency and yield. The results show that the glyphosate weed control programs compared to the conventional methods decreased not only the number of herbicide applications but equally in magnitude decreased the dosage of active ingredients. The results also showed effective weed control with glyphosate when the weed covering was greater and sugar beets had a later growth stage of four true leaves. Glyphosate-resistant sugar beets applied with the glyphosate herbicide two or three times had an increase in white sugar yield from 4 to 18 % in comparison to the high dosage conventional herbicide systems. In summary, under glyphosate management sugar beets can positively contribute to the increasingly demanding requirements regarding efficient sugar beet cultivation and to the demands by society and politics to reduce the use of chemical plant protection products in the environment.

A worksite vegan nutrition program is well-accepted and improves health-related quality of life and work productivity.

PubMed

Katcher, Heather I; Ferdowsian, Hope R; Hoover, Valerie J; Cohen, Joshua L; Barnard, Neal D

2010-01-01

Vegetarian and vegan diets are effective in preventing and treating several chronic diseases. However, their acceptability outside a clinical trial setting has not been extensively studied. The aim of this study was to determine the acceptability of a worksite vegan nutrition program and its effects on health-related quality of life and work productivity. Employees of a major insurance corporation with a body mass index > or =25 kg/m(2) and/or a previous diagnosis of type 2 diabetes received either weekly group instruction on a low-fat vegan diet (n = 68) or received no diet instruction (n = 45) for 22 weeks. The vegan group reported improvements in general health (p = 0.002), physical functioning (p = 0.001), mental health (p = 0.03), vitality (p = 0.004), and overall diet satisfaction (p < 0.001) compared with the control group. The vegan group also reported a decrease in food costs (p = 0.003), and increased difficulty finding foods when eating out (p = 0.04) compared with the control group. The vegan group reported a 40-46% decrease in health-related productivity impairments at work (p = 0.03) and in regular daily activities (p = 0.004). A worksite vegan nutrition program is well-accepted and can be implemented by employers to improve the health, quality of life, and work productivity of employees.

Cortisol production rate is similarly elevated in obese women with or without the polycystic ovary syndrome.

PubMed

Roelfsema, Ferdinand; Kok, Petra; Pereira, Alberto M; Pijl, Hanno

2010-07-01

The pituitary-adrenal axis in obesity and polycystic ovary syndrome (PCOS) is marked by increased urinary excretion of cortisol and its metabolites. It is not as yet clear whether the increased cortisol production in PCOS is related to obesity per se. We investigated 15 obese PCOS women with a body mass index of 30-54 kg/m(2) and 15 healthy obese controls (body mass index 31-60 kg/m(2)) with a regular menstrual cycle. Patients and control women underwent 24-h blood sampling at 20-min intervals. Cortisol concentrations were measured with a sensitive assay. Data were analyzed with a new deconvolution program, approximate entropy, and cosinor regression. Basal, pulsatile, and total cortisol production expressed per liter distribution volume, per square meter body surface, and as absolute amount per 24 h was similar in PCOS patients and matched healthy control women. In addition, the regularity of cortisol secretion and the diurnal properties were identical. Compared with 10 lean control women, mean cortisol production per liter distribution volume was similar in the three groups, but the total 24-h cortisol production was increased in obese control women and PCOS women. This study demonstrates equally increased cortisol production in PCOS women and obese healthy control women.

Initiating malaria control programs in the third world: directives for short- and long-term solutions.

PubMed

Basu, Sanjay

2002-01-01

Although malaria is a growing problem affecting several hundred million people each year, many malarial countries lack successful disease control programs. Worldwide malaria incidence rates are dramatically increasing, generating fear among many people who are witnessing malaria control initiatives fail. In this paper, we explore two options for malaria control in poor countries: (1) the production and distribution of a malaria vaccine and (2) the control of mosquitoes that harbor the malaria parasite. We first demonstrate that the development of a malaria vaccine is indeed likely, although it will take several years to produce because of both biological obstacles and insufficient research support. The distribution of such a vaccine, as suggested by some economists, will require that wealthy states promise a market to pharmaceutical companies who have traditionally failed to investigate diseases affecting the poorest of nations. But prior to the development of a malaria vaccine, we recommend the implementation of vector control pro- grams, such as those using Bti toxin, in regions with low vector capacity. Our analysis indicates that both endogenous programs in malarial regions and molecular approaches to parasite control will provide pragmatic solutions to the malaria problem. But the successful control of malaria will require sustained support from wealthy nations, without whom vaccine development and vector control programs will likely fail.

75 FR 57019 - Pesticide Product Registrations; Conditional Approval

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... foliar use on soybeans to control brown spot, cercospora blight, frogeye leaf spot, leaf spot, powdery..., 2010. G. Jeffrey Herndon, Acting Director, Registration Division, Office of Pesticide Programs. [FR Doc...

E-cigarette Use Triples Among Middle and High School Students in Just One Year

MedlinePlus

... achievable through regulation of the manufacturing, distribution, and marketing of tobacco products coupled with proven strategies. These strategies included funding tobacco control programs at ...

21 CFR 1002.7 - Submission of data and reports.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Document Control (HFZ-309), Office of Communication, Education, and Radiation Programs, 9200 Corporate Blvd..., or model family of the same product category, a “common aspects report” consolidating similar...

Technology advancement of the static feed water electrolysis process

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Wynveen, R. A.

1977-01-01

A program to advance the technology of oxygen- and hydrogen-generating subsystems based on water electrolysis was studied. Major emphasis was placed on static feed water electrolysis, a concept characterized by low power consumption and high intrinsic reliability. The static feed based oxygen generation subsystem consists basically of three subassemblies: (1) a combined water electrolysis and product gas dehumidifier module; (2) a product gas pressure controller and; (3) a cyclically filled water feed tank. Development activities were completed at the subsystem as well as at the component level. An extensive test program including single cell, subsystem and integrated system testing was completed with the required test support accessories designed, fabricated, and assembled. Mini-product assurance activities were included throughout all phases of program activities. An extensive number of supporting technology studies were conducted to advance the technology base of the static feed water electrolysis process and to resolve problems.

Dynamic optimization approach for integrated supplier selection and tracking control of single product inventory system with product discount

NASA Astrophysics Data System (ADS)

Sutrisno; Widowati; Heru Tjahjana, R.

2017-01-01

In this paper, we propose a mathematical model in the form of dynamic/multi-stage optimization to solve an integrated supplier selection problem and tracking control problem of single product inventory system with product discount. The product discount will be stated as a piece-wise linear function. We use dynamic programming to solve this proposed optimization to determine the optimal supplier and the optimal product volume that will be purchased from the optimal supplier for each time period so that the inventory level tracks a reference trajectory given by decision maker with minimal total cost. We give a numerical experiment to evaluate the proposed model. From the result, the optimal supplier was determined for each time period and the inventory level follows the given reference well.

Active Flow Control Activities at NASA Langley

NASA Technical Reports Server (NTRS)

Anders, Scott G.; Sellers, William L., III; Washburn, Anthony E.

2004-01-01

NASA Langley continues to aggressively investigate the potential advantages of active flow control over more traditional aerodynamic techniques. This paper provides an update to a previous paper and describes both the progress in the various research areas and the significant changes in the NASA research programs. The goals of the topics presented are focused on advancing the state of knowledge and understanding of controllable fundamental mechanisms in fluids as well as to address engineering challenges. An organizational view of current research activities at NASA Langley in active flow control as supported by several projects is presented. On-center research as well as NASA Langley funded contracts and grants are discussed at a relatively high level. The products of this research are to be demonstrated either in bench-top experiments, wind-tunnel investigations, or in flight as part of the fundamental NASA R&D program and then transferred to more applied research programs within NASA, DOD, and U.S. industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., with the assistance of NREL's PV Manufacturing R&D program, have continued the advancement of CIGS production technology through the development of trajectory-oriented predictive/control models, fault-tolerance control, control-platform development, in-situ sensors, and process improvements. Modeling activities to date include the development of physics-based and empirical models for CIGS and sputter-deposition processing, implementation of model-based control, and application of predictive models to the construction of new evaporation sources and for control. Model-based control is enabled through implementation of reduced or empirical models into a control platform. Reliability improvement activities include implementation of preventivemore » maintenance schedules; detection of failed sensors/equipment and reconfiguration to continue processing; and systematic development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which, in turn, have been enabled by control and reliability improvements due to this PV Manufacturing R&D program. This has resulted in substantial improvements of flexible CIGS PV module performance and efficiency.« less

"Employment and arthritis: making it work" a randomized controlled trial evaluating an online program to help people with inflammatory arthritis maintain employment (study protocol).

PubMed

Carruthers, Erin C; Rogers, Pamela; Backman, Catherine L; Goldsmith, Charles H; Gignac, Monique A; Marra, Carlo; Village, Judy; Li, Linda C; Esdaile, John M; Lacaille, Diane

2014-07-21

Arthritis and musculoskeletal conditions are the leading cause of long-term work disability (WD), an outcome with a major impact on quality of life and a high cost to society. The importance of decreased at-work productivity has also recently been recognized. Despite the importance of these problems, few interventions have been developed to reduce the impact of arthritis on employment. We have developed a novel intervention called "Making It Work", a program to help people with inflammatory arthritis (IA) deal with employment issues, prevent WD and improve at-work productivity. After favorable results in a proof-of-concept study, we converted the program to a web-based format for broader dissemination and improved accessibility. The objectives of this study are: 1) to evaluate in a randomized controlled trial (RCT) the effectiveness of the program at preventing work cessation and improving at-work productivity; 2) to perform a cost-utility analysis of the intervention. 526 participants with IA will be recruited from British Columbia, Alberta, and Ontario in Canada. The intervention consists of a) 5 online group sessions; b) 5 web-based e-learning modules; c) consultations with an occupational therapist for an ergonomic work assessment and a vocational rehabilitation counselor. Questionnaires will be administered online at baseline and every 6 months to collect information about demographics, disease measures, costs, work-related risk factors for WD, quality of life, and work outcomes. Primary outcomes include at-work productivity and time to work cessation of > 6 months for any reason. Secondary outcomes include temporary work cessation, number of days missed from work per year, reduction in hours worked per week, quality adjusted life year for the cost utility analysis, and changes from baseline in employment risk factors. Analysis of Variance will evaluate the intervention's effect on at-work productivity, and multivariable Cox regression models will estimate the risk of work cessation associated with the intervention after controlling for risk factors for WD and other important predictors imbalanced at baseline. This program fills an important gap in arthritis health services and addresses an important and costly problem. Knowledge gained from the RCT will be useful to health care professionals, policy planners and arthritis stakeholders. ClinicalTrials.gov NCT01852851; registered April 13, 2012; first participant randomized on July 6, 2013.

76 FR 67320 - Walnuts Grown in California; Increased Assessment Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... Expenses/Annual Audit 208,000 218,000 Office Expenses 118,850 117,750 Program Expenses Including Research: Controlled Purchases 20,000 20,000 Crop Acreage Survey 95,000 95,000 Crop Estimate 105,000 115,000 Production Research Director.. 88,500 88,500 Production Research 1,042,000 1,036,000 Sustainability Project........ 0...

Immunologic evaluation of 10 different adjuvants for use in vaccines for chickens against highly pathogenic avian influenza virus

USDA-ARS?s Scientific Manuscript database

Avian influenza viruses (AIV) are a threat to poultry production worldwide. Vaccination is utilized as a component of control programs for both high pathogenicity (HP) and low pathogenicity (LP) AIV. Over 95% of all AIV vaccine used in poultry are inactivated, adjuvanted products. To identify the be...

78 FR 38029 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; EPA's...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... Submitted to OMB for Review and Approval; Comment Request; EPA's Design for the Environment Formulator... Environment Formulator Product Recognition Program'' (EPA ICR No. 2302.02, OMB Control No. 2070-0178), to the..., visit http://www.epa.gov/dockets . Abstract: EPA's Design for the Environment (DfE) Formulator Product...

ENVIRONMENTAL TECHNLOGY VERIFICATION PROGRAM REPORT: PAINT OVERSPRAY ARRESTOR, PUROLATOR PRODUCTS AIR FILTRATION CO. D95084415, DMK 80-4404 AND PB2424

EPA Science Inventory

The report gives results of March 26-29, 1999, tests of Purolator Products Air Filtration Co's D95084415, DMK80-4404, and PB2424 paint overspray arrestors (POAs) as part of an evaluation of POAs by EPA's Air Pollution Control Technology (APCT) Environmental Technology Verificatio...

The NASA Commercial Crew Program (CCP) Mission Assurance Process

NASA Technical Reports Server (NTRS)

Canfield, Amy

2016-01-01

In 2010, NASA established the Commercial Crew Program in order to provide human access to the International Space Station and low earth orbit via the commercial (non-governmental) sector. A particular challenge to NASA has been how to determine the commercial providers transportation system complies with Programmatic safety requirements. The process used in this determination is the Safety Technical Review Board which reviews and approves provider submitted Hazard Reports. One significant product of the review is a set of hazard control verifications. In past NASA programs, 100 percent of these safety critical verifications were typically confirmed by NASA. The traditional Safety and Mission Assurance (SMA) model does not support the nature of the Commercial Crew Program. To that end, NASA SMA is implementing a Risk Based Assurance (RBA) process to determine which hazard control verifications require NASA authentication. Additionally, a Shared Assurance Model is also being developed to efficiently use the available resources to execute the verifications. This paper will describe the evolution of the CCP Mission Assurance process from the beginning of the Program to its current incarnation. Topics to be covered include a short history of the CCP; the development of the Programmatic mission assurance requirements; the current safety review process; a description of the RBA process and its products and ending with a description of the Shared Assurance Model.

The Teachers of Quality Academy: Evaluation of the Effectiveness and Impact of a Health Systems Science Training Program.

PubMed

Walsh, Danielle S; Lazorick, Suzanne; Lawson, Luan; Lake, Donna; Garrison, Herbert G; Higginson, Jason; Vos, Paul; Baxley, Elizabeth

2018-05-01

This project aimed to evaluate the effectiveness of a faculty development program in health systems science (HSS)-the Teachers of Quality Academy (TQA). Participants in TQA and a comparison group were evaluated before, during, and 1 year after the program using self-perception questionnaires, tests of HSS knowledge, and tracking of academic productivity and career advancement. Among program completers (n = 27), the mean self-assessed ratings of knowledge and skills of HSS topics immediately after the program, as compared to baseline, increased significantly compared to controls (n = 30). Participants demonstrated progressive improvement of self-perceived skills and attitudes, and retention of HSS knowledge, from baseline to completion of the program. Participants also demonstrated substantially higher HSS scholarly productivity, leadership, and career advancement compared to the comparison group. The TQA effectively created a faculty cadre able to role model, teach, and create a curriculum in HSS competencies for medical students, resident physicians, and other health professionals.

40 CFR Appendix F to Subpart A of... - Listing of Ozone-Depleting Chemicals

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Listing of Ozone-Depleting Chemicals F...) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls Pt. 82, Subpt. A, App. F Appendix F to Subpart A of Part 82—Listing of Ozone-Depleting Chemicals Controlled...

40 CFR Appendix F to Subpart A of... - Listing of Ozone-Depleting Chemicals

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Listing of Ozone-Depleting Chemicals F...) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls Pt. 82, Subpt. A, App. F Appendix F to Subpart A of Part 82—Listing of Ozone-Depleting Chemicals Controlled...

40 CFR Appendix F to Subpart A of... - Listing of Ozone-Depleting Chemicals

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 18 2013-07-01 2013-07-01 false Listing of Ozone-Depleting Chemicals F...) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption Controls Pt. 82, Subpt. A, App. F Appendix F to Subpart A of Part 82—Listing of Ozone-Depleting Chemicals Controlled...

Some Results of Weak Anticipative Concept Applied in Simulation Based Decision Support in Enterprise

NASA Astrophysics Data System (ADS)

Kljajić, Miroljub; Kofjač, Davorin; Kljajić Borštnar, Mirjana; Škraba, Andrej

2010-11-01

The simulation models are used as for decision support and learning in enterprises and in schools. Tree cases of successful applications demonstrate usefulness of weak anticipative information. Job shop scheduling production with makespan criterion presents a real case customized flexible furniture production optimization. The genetic algorithm for job shop scheduling optimization is presented. Simulation based inventory control for products with stochastic lead time and demand describes inventory optimization for products with stochastic lead time and demand. Dynamic programming and fuzzy control algorithms reduce the total cost without producing stock-outs in most cases. Values of decision making information based on simulation were discussed too. All two cases will be discussed from optimization, modeling and learning point of view.

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

[Prospect of the Advanced Life Support Program Breadboard Project at Kennedy Space Center in USA].

PubMed

Guo, S S; Ai, W D

2001-04-01

The Breadboard Project at Kennedy Space Center in NASA of USA was focused on the development of the bioregenerative life support components, crop plants for water, air, and food production and bioreactors for recycling of wastes. The keystone of the Breadboard Project was the Biomass Production Chamber (BPC), which was supported by 15 environmentally controlled chambers and several laboratory facilities holding a total area of 2150 m2. In supporting the Advanced Life Support Program (ALS Program), the Project utilizes these facilities for large-scale testing of components and development of required technologies for human-rated test-beds at Johnson Space Center in NASA, in order to enable a Lunar and a Mars mission finally.

Machine tools and fixtures: A compilation

NASA Technical Reports Server (NTRS)

1971-01-01

As part of NASA's Technology Utilizations Program, a compilation was made of technological developments regarding machine tools, jigs, and fixtures that have been produced, modified, or adapted to meet requirements of the aerospace program. The compilation is divided into three sections that include: (1) a variety of machine tool applications that offer easier and more efficient production techniques; (2) methods, techniques, and hardware that aid in the setup, alignment, and control of machines and machine tools to further quality assurance in finished products: and (3) jigs, fixtures, and adapters that are ancillary to basic machine tools and aid in realizing their greatest potential.

15 CFR 752.11 - Internal Control Programs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... order for several sophisticated lasers. (C) The product ordered is incompatible with the technical level... equipment would be of little use in a country without an electronics industry. (D) The customer has little...

15 CFR 752.11 - Internal Control Programs.

Code of Federal Regulations, 2012 CFR

2012-01-01

... order for several sophisticated lasers. (C) The product ordered is incompatible with the technical level... equipment would be of little use in a country without an electronics industry. (D) The customer has little...

15 CFR 752.11 - Internal Control Programs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... order for several sophisticated lasers. (C) The product ordered is incompatible with the technical level... equipment would be of little use in a country without an electronics industry. (D) The customer has little...

15 CFR 752.11 - Internal Control Programs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... order for several sophisticated lasers. (C) The product ordered is incompatible with the technical level... equipment would be of little use in a country without an electronics industry. (D) The customer has little...

40 CFR 82.24 - Recordkeeping and reporting requirements for class II controlled substances.

Code of Federal Regulations, 2013 CFR

2013-07-01

... contrary to provisions of the Vienna Convention on Substances that Deplete the Ozone Layer, the Montreal... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and...

40 CFR 82.24 - Recordkeeping and reporting requirements for class II controlled substances.

Code of Federal Regulations, 2012 CFR

2012-07-01

... contrary to provisions of the Vienna Convention on Substances that Deplete the Ozone Layer, the Montreal... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and...

Drill user's manual. [drilling machine automation

NASA Technical Reports Server (NTRS)

Pitts, E. A.

1976-01-01

Instructions are given for using the DRILL computer program which converts data contained in an Interactive Computer Graphics System (IGDS) design file to production of a paper tape for driving a numerically controlled drilling machine.

Optimal Strategy for Integrated Dynamic Inventory Control and Supplier Selection in Unknown Environment via Stochastic Dynamic Programming

NASA Astrophysics Data System (ADS)

Sutrisno; Widowati; Solikhin

2016-06-01

In this paper, we propose a mathematical model in stochastic dynamic optimization form to determine the optimal strategy for an integrated single product inventory control problem and supplier selection problem where the demand and purchasing cost parameters are random. For each time period, by using the proposed model, we decide the optimal supplier and calculate the optimal product volume purchased from the optimal supplier so that the inventory level will be located at some point as close as possible to the reference point with minimal cost. We use stochastic dynamic programming to solve this problem and give several numerical experiments to evaluate the model. From the results, for each time period, the proposed model was generated the optimal supplier and the inventory level was tracked the reference point well.

Assessing conservation tools for an at-risk shorebird: Feasibility of headstarting for American Oystercatchers Haematopus palliatus

USGS Publications Warehouse

Collins, Samantha A.; Sanders, Felicia J.; Jodice, Patrick G.R.

2016-01-01

Management of threatened and endangered populations of wildlife increasingly relies upon active intervention such as predator control, habitat manipulation, and ex situ breeding or care. One tool that has received consideration for the management of declining or threatened avian populations is headstarting, or the artificial incubation of eggs and subsequent placement of newly hatched chicks in original or foster nests. We assessed the feasibility of implementing a headstarting program for the American Oystercatcher Haematopus palliatus, a species of high conservation concern in the eastern USA. Annual productivity is often low and lost during incubation, suggesting artificial incubation could enhance annual productivity. We used a control-impact approach to assign nests as either control or headstart and measured daily survival rate, success of parents accepting headstarted chicks, attendance patterns and behaviours of parents, and chick survival. We also implemented a transparent scoring process to rate the success of each step and the overall program. Daily survival rates of nests were significantly higher at headstart compared to control nests, and parents continued to incubate when eggs were well secured at nest sites. Attendance patterns and behaviour did not differ between headstart and control parents, and parents readily accepted healthy chicks whether they were returned to original or foster nests. Chick survival and subsequently annual productivity were, however, not higher at headstart compared to control nests suggesting that although we were able to enhance nest survival, low chick survival was still limiting annual productivity. Ultimately, headstarting may be most appropriate for American Oystercatchers where productivity is lost primarily to flooding, predation, or disturbance during the incubation stage but not during the chick-rearing stage. If, for example, high rates of nest loss are due to predators that also may prey upon chicks, then headstarting may not be an effective conservation tool.

The effectiveness of a tobacco prevention program with adolescents living in a tobacco-producing region.

PubMed Central

Noland, M P; Kryscio, R J; Riggs, R S; Linville, L H; Ford, V Y; Tucker, T C

1998-01-01

OBJECTIVES: This study investigated the efficacy of a social-influences tobacco prevention program conducted with adolescents living in a high tobacco production area. METHODS: Students in 10 experimental schools completed the tobacco prevention program and a booster intervention. Control students received health education as usual. RESULTS: After 2 years of treatment, smoking rates in the treatment group (vs the control group) were lower for 30-day, 7-day, and 24-hour smoking. The intervention had more of an impact on those who were involved in raising tobacco than it did on those not involved in raising tobacco. CONCLUSIONS: Although modest, effects were achieved with minimal intervention time in a high-risk group, indicating that social-influences prevention programs may be effective in such groups. PMID:9842390

Components of the Motor Program: The Cerebellum as an Internal Clock. Cognitive Science Program, Technical Report No 86-7.

ERIC Educational Resources Information Center

Ivry, Richard B.; Keele, Steven W.

This report summarizes the initial phase of research with neurological patients on timing functions. Parkinsonian, cerebellar, cortical and peripheral neuropathy patients as well as college aged and elderly control subjects were tested on two separate measures of timing functions. The first task involved the production of timed intervals and used…

Autonomous power management and distribution

NASA Technical Reports Server (NTRS)

Dolce, Jim; Kish, Jim

1990-01-01

The goal of the Autonomous Power System program is to develop and apply intelligent problem solving and control to the Space Station Freedom's electric power testbed being developed at NASA's Lewis Research Center. Objectives are to establish artificial intelligence technology paths, craft knowledge-based tools and products for power systems, and integrate knowledge-based and conventional controllers. This program represents a joint effort between the Space Station and Office of Aeronautics and Space Technology to develop and demonstrate space electric power automation technology capable of: (1) detection and classification of system operating status, (2) diagnosis of failure causes, and (3) cooperative problem solving for power scheduling and failure recovery. Program details, status, and plans will be presented.

Advanced Research Projects Agency counterdrug program

NASA Astrophysics Data System (ADS)

Pennella, John J.

1994-03-01

The Department of Defense (DoD), in support of the National Drug Control Strategy, has designated that detecting and countering the production, trafficking and use of illegal drugs is a high priority national security mission. The Advanced Research Projects Agency (ARPA) Counterdrug Program is assisting DoD in this objective by developing technology and prototype systems to enhance the capabilities of the DoD and civilian law enforcement agencies, consistent with the DoD mission and the supply reduction goals of the National Drug Control Strategy. The objective of this paper is to summarize the current ARPA Counterdrug Program, with special emphasis on the current efforts and future plans for developing technology to meet the National needs for Non-Intrusive Inspection.

Energy from biomass and wastes V; Proceedings of the Fifth Symposium, Lake Buena Vista, FL, January 26-30, 1981

NASA Astrophysics Data System (ADS)

Papers are presented in the areas of biomass production and procurement, biomass and waste combustion, gasification processes, liquefaction processes, environmental effects and government programs. Specific topics include a water hyacinth wastewater treatment system with biomass production, the procurement of wood as an industrial fuel, the cofiring of densified refuse-derived fuel and coal, the net energy production in anaerobic digestion, photosynthetic hydrogen production, the steam gasification of manure in a fluidized bed, and biomass hydroconversion to synthetic fuels. Attention is also given to the economics of deriving alcohol for power applications from grain, ethanol fermentation in a yeast-immobilized column fermenter, a solar-fired biomass flash pyrolysis reactor, particulate emissions from controlled-air modular incinerators, and the DOE program for energy recovery from urban wastes.

Economic evaluation of the eradication program for bovine viral diarrhea in the Swiss dairy sector.

PubMed

Thomann, B; Tschopp, A; Magouras, I; Meylan, M; Schüpbach-Regula, G; Häsler, B

2017-09-15

Since 2008, the Swiss veterinary service has been running a mandatory eradication program for Bovine Viral Diarrhea (BVD) that is focused on detecting and eliminating persistently infected (PI) animals. Detection was initially based on antigen testing from ear tag samples of the entire cattle population, followed by antigen testing of all newborn calves until 2012. Since then, bulk milk serology (dairy herds) and blood sample serology (beef herds) have been used for the surveillance of disease-free herds. From 2008 to 2012, the proportion of newborn PI calves decreased from 1.4% to less than 0.02%. However, this success was associated with substantial expenditures. The aim of this study was to conduct an economic evaluation of the BVD eradication program in the Swiss dairy sector. The situation before the start of the program (herd-level prevalence: 20%) served as a baseline scenario. Production models for three dairy farm types were used to estimate gross margins as well as net production losses and expenditures caused by BVD. The total economic benefit was estimated as the difference in disease costs between the baseline scenario and the implemented eradication program and was compared to the total eradication costs in a benefit-cost analysis. Data on the impact of BVD virus (BVDV) infection on animal health, fertility and production parameters were obtained empirically in a retrospective epidemiological case-control study in Swiss dairy herds and complemented by literature. Economic and additional production parameters were based on benchmarking data and published agricultural statistics. The eradication costs comprised the cumulative expenses for sampling and diagnostics. The economic model consisted of a stochastic simulation in @Risk for Excel with 20,000 iterations and was conducted for a time period of 14 years (2008-2021). The estimated annual financial losses in BVDV infected herds were CHF 85-89 per dairy cow and CHF 1337-2535 for an average farm, depending on the production type. The median net present value (NPV) was estimated at CHF 44.9 million (90% central range: CHF 13.4 million-69.4 million) and the break-even point to have been reached in 2015. Overall, the outcomes demonstrate that the Swiss BVD eradication program results in a net benefit for the dairy sector. These findings are relevant for planning similar BVD control programs in other countries. Copyright © 2017. Published by Elsevier B.V.

Climatological Processing and Product Development for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Marks, D. A.; Kulie, M. S.; Robinson, M.; Silberstein, D. S.; Wolff, D. B.; Ferrier, B. S.; Amitai, E.; Fisher, B.; Wang, J.; Augustine, D.;

The Philippine Population Program strategic plan (1981-1985).

PubMed

1980-01-01

The challenge of the population problem is to effectively mobilize the country's population for productive activity. Rather than simply concern with controlling numbers, emphasis is on human resource management, the structure of employment, labor productivity and income distribution. The long-term Philippine Development Plans reflect recognition of the dynamic interaction between fertility, productivity and welfare. Objectives of the 5-Year Philippine Development Plan 1978-1982, the 10-Year Plan 1978-1987, and the Long-Term Plan to year 2000 integrate population concerns and socioeconomic goals. These objectives include the following: promotion of social development and social justice; attainment of self-sufficiency in food and greater self-reliance in energy; increased development of lagging regions, especially rural areas; improvements of habitat through the development of human settlements and proper management of the environment; and maintenance of population growth at levels conducive to national welfare. Some population concerns that are directly relevant to welfare (in addition to those related to productivity) are distribution patterns of social goods and services, access to services by sectors of the population, and buying power of families. As a total population policy should establish closer linkages, operationally, between the demographic aspects and the productivity and welfare aspects of development, the mission of the National Population Program encompasses 3 areas: fertility; productivity; and welfare. Strategic policies include the following: abortion is unacceptable as a contraceptive method; the population program shall be non-coercive; and the program shall view individual and family welfare in the context and as the main objective of national socioeconomic programs.

Current status for gastrointestinal nematode diagnosis in small ruminants: where are we and where are we going?

PubMed

Preston, Sarah Jane Margaret; Sandeman, Mark; Gonzalez, Jorge; Piedrafita, David

2014-01-01

Gastrointestinal nematode (GIN) parasites pose a significant economic burden particularly in small ruminant production systems. Anthelmintic resistance is a serious concern to the effective control of GIN parasites and has fuelled the focus to design and promote sustainable control of practices of parasite control. Many facets of sustainable GIN parasite control programs rely on the ability to diagnose infection both qualitatively and quantitatively. Diagnostics are required to determine anthelmintic efficacies, for targeted treatment programs and selection of animals for parasite resistant breeding. This review describes much of the research investigated to date to improve the current diagnostic for the above practices which is based on counting the number of parasite eggs in faeces.

Toward an explicit analysis of generalization: A stimulus control interpretation

PubMed Central

Kirby, Kimberly C.; Bickel, Warren K.

1988-01-01

Producing generality of treatment effects to new settings has been a critical concern for applied behavior analysts, but a systematic and reliable means of producing generality has yet to be provided. We argue that the principles of stimulus control and reinforcement underlie the production of most generalized effects; therefore, we suggest interpreting generalization programming in terms of stimulus control. The generalization programming procedures identified by Stokes and Baer (1977) are discussed in terms of both the stimulus control tactics explicitly identified and those that may be operating but are not explicitly identified. Our interpretation clarifies the critical components of Stokes and Baer's procedures and places greater emphasis on planning for generalization as a part of training procedures. PMID:22478006

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-01-01

Mobil Solar Energy Corporation currently practices a unique crystal growth technology for producing crystalline silicon sheet, which is then cut with lasers into wafers. The wafers are processed into solar cells and incorporated into modules for photovoltaic applications. The silicon sheet is produced using a method known as Edge-defined Film-fed growth (EFG), in the form of hollow eight-sided polygons (octagons) with 10 cm faces. These are grown to lengths of 5 meters and thickness of 300 microns, with continuous melt replenishment, in compact furnaces designed to operate at a high sheet area production area of 135 sq cm/min. The present Photovoltaic Manufacturing Technology (PVMaT) three-year program seeks to advance the manufacturing line capabilities of the Mobil Solar crystal growth and cutting technologies. If successful, these advancements will provide significant reductions in already low silicon raw material usage, improve process productivity, laser cutting throughput and yield, and so lower both individual wafer cost and the cost of module production. This report summarizes the significant technical improvements in EFG technology achieved in Phase 1 of this program. Technical results are reported for each of the three main program areas: (1) thin octagon growth (crystal growth) -- to reduce the thickness of the octagon to an interim goal of 250 microns during Phase 1, with an ultimate goal of achieving 200 micron thicknesses; (2) laser cutting -- to improve the laser cutting process, so as to produce wafers with decreased laser cutting damage at increased wafer throughput rates; and (3) process control and product specification -- to implement advanced strategies in crystal growth process control and productivity designed to increase wafer yields.

Initial Flight Test of the Production Support Flight Control Computers at NASA Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Carter, John; Stephenson, Mark

1999-01-01

The NASA Dryden Flight Research Center has completed the initial flight test of a modified set of F/A-18 flight control computers that gives the aircraft a research control law capability. The production support flight control computers (PSFCC) provide an increased capability for flight research in the control law, handling qualities, and flight systems areas. The PSFCC feature a research flight control processor that is "piggybacked" onto the baseline F/A-18 flight control system. This research processor allows for pilot selection of research control law operation in flight. To validate flight operation, a replication of a standard F/A-18 control law was programmed into the research processor and flight-tested over a limited envelope. This paper provides a brief description of the system, summarizes the initial flight test of the PSFCC, and describes future experiments for the PSFCC.

Publications of the NASA Controlled Ecological Life Support System (CELSS) program 1989-1992

NASA Technical Reports Server (NTRS)

Powers, Janet V.

1994-01-01

Publications of research sponsored by the NASA Controlled Ecological Life Support System (CELSS) program are listed. The CELSS program encompasses research and technology with the goal of developing an autonomous bioregenerative life support system, which is based upon the integration of biological and physical/chemical processes, that will produce nutritious and palatable food, potable and hygienic water, and a breathable atmosphere by recycling metabolic and other wastes. This research and technology development is being performed in the areas of biomass production/food processing, waste management, and systems management and control. The bibliography follows these divisions. Principal investigators whose research tasks resulted in publication are identified by an asterisk. Publications are identified by a record number corresponding with their entry in the Life Sciences Bibliographic Database, maintained at the George Washington University.

Cone and seed yields in white spruce seed production areas

Treesearch

John A. Pitcher

1966-01-01

The source of seed is an important consideration in the reforestation program on the National Forests in the North Central Region. Thirty-five seed production areas have been set up in the Region, along the lines proposed by the North Central Forest Experiment Station, to provide control of seed source. Red pine, white pine, shortleaf and loblolly pine, and white...

Multimedia Language Learning Courseware: A Design Solution to the Production of a Series of CD-ROMs.

ERIC Educational Resources Information Center

Brett, P. A.; Nash, M.

1999-01-01

Discusses multimedia software and describes the production and the learning rationale of a series of six multimedia CD-ROMs that develop the listening skills of learners of Business English. Describes problems of cost, time, and quality in producing multiple courseware and explains the programming solution which gives control to subject experts.…

Natural methods for increasing reproductive efficiency in small ruminants.

PubMed

Martin, G B; Milton, J T B; Davidson, R H; Banchero Hunzicker, G E; Lindsay, D R; Blache, D

2004-07-01

This paper describes three strategies to improve the reproductive performance of small ruminants in ways that lead to "clean, green and ethical" animal production. The first is aimed at control of the timing of reproductive events for which we turn to the socio-sexual inputs of the "male effect" to induce synchronised ovulation in females that would otherwise be anovulatory. The second strategy, "focussed feeding", is based on our knowledge of the responses to nutrition and aims to develop short programs of nutritional supplements that are precisely timed and specifically designed for individual events in the reproductive process, such as gamete production, embryo survival, fetal programming and colostrum production. The third strategy aims to maximise offspring survival by a combination of management, nutrition and genetic selection for behavior (temperament). All of these approaches involve non-pharmacological manipulation of the endogenous control systems of the animals and complement the detailed information from ultrasound that is now becoming available. The use of such clean, green and ethical tools in the management of our animals can be cost-effective, increase productivity and, at the same time, greatly improve the image of meat and milk industries in society and the marketplace.

Resistance training program for fatigue management in the workplace: exercise protocol in a cluster randomized controlled trial.

PubMed

Santos, Hélio Gustavo; Chiavegato, Luciana Dias; Valentim, Daniela Pereira; da Silva, Patricia Rodrigues; Padula, Rosimeire Simprini

2016-12-22

Fatigue is a multifactorial condition that leads to disease and loss in production, and it affects a large number of workers worldwide. This study aims to demonstrate a resistance exercise protocol that individuals will perform during the work schedule, and to evaluate the effectiveness of this exercises program for fatigue control. This is a cluster randomized controlled trial with two arms and is assessor blinded. A total of 352 workers of both sexes, aged 18-65 years, from a medium-sized dairy plant were enrolled in this study. Participants will be recruited from 13 production sectors according to the eligibility criteria and will be randomized by clusters to either the Progressive Resistance Exercise (PRE) intervention group or the Compensatory Workplace Exercise (CWE) comparative group. A resistance exercise program will be implemented for both groups. The groups will receive instructions on self-management, breaks, adjustments to workstations, and the benefits of physical exercise. The PRE group will perform resistance exercises with gradual loads in an exercise room, and the CWE group will perform exercise at their workstations using elastic bands. The exercise sessions will be held 3 times a week for 20 min. The primary outcome measures will be symptoms of physical and mental fatigue, and muscular fatigue based on a one-repetition maximum (1RM). The secondary outcome measures will be level of physical activity, musculoskeletal symptoms, physical condition, perceived exposure, and productivity. The workers will be assessed at baseline and after a 4-month program. A linear mixed model will be applied on an intention-to-treat basis. This intervention is expected to reduce symptoms of fatigue in the workers. The exercise program is indicating in the workplace, although there are few studies describing the effects of exercise on the control of fatigue in the workplace. Emphasis will be placed on adherence to the program, which may result in significant and clinically important reductions in fatigue. It is also expected that the findings of this study will contribute significantly to the decision-making capacity of professionals working in the field of occupational health. U.S. National Institutes of Health, ClinicalTrials.gov Identifier: NCT02172053 . Date registered 19 June 2014.

IPM for fresh-market lettuce production in the desert southwest: the produce paradox.

PubMed

Palumbo, John C; Castle, Steven J

2009-12-01

In the 'Integrated Control Concept', Stern et al. emphasized that, although insecticides are necessary for agricultural production, they should only be used as a last resort and as a complement to biological control. They argued that selective insecticide use should only be attempted after it has been determined that insect control with naturally occurring biotic agents is not capable of preventing economic damage. However, they concluded their seminal paper by emphasizing that integrated control will not work where natural enemies are inadequate or where economic thresholds are too low to rely on biological control. Thus, it is no surprise that insect control in high-value, fresh-market lettuce crops grown in the desert southwest have relied almost exclusively on insecticides to control a complex of mobile, polyphagous pests. Because lettuce and leafy greens are short-season annual crops with little or no tolerance for insect damage or contamination, biological control is generally considered unacceptable. High expectations from consumers for aesthetically appealing produce free of pesticide residues further forces vegetable growers to use chemical control tactics that are not only effective but safe. Consequently, scientists have been developing integrated pest management (IPM) programs for lettuce that are aimed at reducing the economic, occupational and dietary risks associated with chemical controls of the past. Most of these programs have drawn upon the integrated control concept and promote the importance of understanding the agroecosystem, and the need to sample for pest status and use action thresholds for cost-effective insect control. More recently, pest management programs have implemented newly developed, reduced-risk chemistries that are selectively efficacious against key pests. This paper discusses the influence that the integrated control concept, relative to zero-tolerance market standards and other constraints, has had on the adoption of pest management in desert lettuce crops. (c) 2009 Society of Chemical Industry.

NASA aeronautics R&T - A resource for aircraft design

NASA Technical Reports Server (NTRS)

Olstad, W. B.

1981-01-01

This paper discusses the NASA aeronautics research and technology program from the viewpoint of the aircraft designer. The program spans the range from fundamental research to the joint validation with industry of technology for application into product development. Examples of recent developments in structures, materials, aerodynamics, controls, propulsion systems, and safety technology are presented as new additions to the designer's handbook. Finally, the major thrusts of NASA's current and planned programs which are keyed to revolutionary advances in materials science, electronics, and computer technology are addressed.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1972-01-01

A program to advance the technology for a cost-effective hydrogen/oxygen fuel cell system for future manned spacecraft is discussed. The evaluation of base line design concepts and the development of product improvements in the areas of life, power, specific weight and volume, versatility of operation, field maintenance and thermal control were conducted from the material and component level through the fabrication and test of an engineering model of the fuel cell system. The program was to be accomplished in a 13 month period.

Programmed iron oxide nanoparticles disintegration in anaerobic digesters boosts biogas production.

PubMed

Casals, Eudald; Barrena, Raquel; García, Ana; González, Edgar; Delgado, Lucía; Busquets-Fité, Martí; Font, Xavier; Arbiol, Jordi; Glatzel, Pieter; Kvashnina, Kristina; Sánchez, Antoni; Puntes, Víctor

2014-07-23

A novel concept of dosing iron ions using Fe3O4 engineered nanoparticles is used to improve biogas production in anaerobic digestion processes. Since small nanoparticles are unstable, they can be designed to provide ions in a controlled manner, and the highest ever reported improvement of biogas production is obtained. The nanoparticles evolution during operation is followed by an array of spectroscopic techniques. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Program Office Guide to Technology Transfer

DTIC Science & Technology

1988-11-01

Requirements 2-4 2.4.1 Equipment Complexity 2-5 2.4.2 Industrial Capabilities 2-5 2.4.3 Logistics Requirements/Configuration Control 2-5 2.4.4 Schedule...accomplishment of these milestones re- with the leverage of the FSD and production pro- sults in second source full production capability , grams. For more...MANUFACTURING PROCESSES BUILD UP COMPETITIVE PRODUCTION RATE CAPABILITY DURING LOT III Table 1.2-1 AMRAAM Technology Transfer The leader-follower approach is

Comparison of laboratory and field bioassays of lab-reared Cydia pomonella (Lepidoptera: Tortricidae) quality and field performance.

USDA-ARS?s Scientific Manuscript database

Maximum production and fitness of insect species that are mass-reared for biological control programs such as the sterile insect technique (SIT) have benefitted from the employment of quality control and quality management. With a growing interest in the use of SIT as a tactic for the suppression/e...

7 CFR 2.22 - Under Secretary for Marketing and Regulatory Programs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Consultative Group to Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural Products. (2..., control or eradicate foot-and-mouth disease and other foreign animal diseases (21 U.S.C. 113a); (xiii) The... States in control and eradication of plant and animal diseases and pests; (xv) The Federal Noxious Weed...

7 CFR 2.22 - Under Secretary for Marketing and Regulatory Programs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Consultative Group to Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural Products. (2..., control or eradicate foot-and-mouth disease and other foreign animal diseases (21 U.S.C. 113a); (xiii) The... States in control and eradication of plant and animal diseases and pests; (xv) The Federal Noxious Weed...

7 CFR 2.22 - Under Secretary for Marketing and Regulatory Programs.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Consultative Group to Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural Products. (2..., control or eradicate foot-and-mouth disease and other foreign animal diseases (21 U.S.C. 113a); (xiii) The... States in control and eradication of plant and animal diseases and pests; (xv) The Federal Noxious Weed...

7 CFR 2.22 - Under Secretary for Marketing and Regulatory Programs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Consultative Group to Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural Products. (2..., control or eradicate foot-and-mouth disease and other foreign animal diseases (21 U.S.C. 113a); (xiii) The... States in control and eradication of plant and animal diseases and pests; (xv) The Federal Noxious Weed...

Knowledge and Control in the Flexible Workplace. EAE610 The Changing Workplace: Part B.

ERIC Educational Resources Information Center

Watkins, Peter

This publication is part of the study materials for the distance education course, The Changing Workplace: Part B, in the Open Campus Program at Deakin University. The first part of the document examines current thinking regarding knowledge and control in workplaces emphasizing flexible production systems, flexible technology, and a flexible work…

Cost-effectiveness of an exercise program during pregnancy to prevent gestational diabetes: results of an economic evaluation alongside a randomised controlled trial.

PubMed

Oostdam, Nicolette; Bosmans, Judith; Wouters, Maurice G A J; Eekhoff, Elisabeth M W; van Mechelen, Willem; van Poppel, Mireille N M

2012-07-04

The prevalence of gestational diabetes mellitus (GDM) is increasing worldwide. GDM and the risks associated with GDM lead to increased health care costs and losses in productivity. The objective of this study is to evaluate whether the FitFor2 exercise program during pregnancy is cost-effective from a societal perspective as compared to standard care. A randomised controlled trial (RCT) and simultaneous economic evaluation of the FitFor2 program were conducted. Pregnant women at risk for GDM were randomised to an exercise program to prevent high maternal blood glucose (n = 62) or to standard care (n = 59). The exercise program consisted of two sessions of aerobic and strengthening exercises per week. Clinical outcome measures were maternal fasting blood glucose levels, insulin sensitivity and infant birth weight. Quality of life was measured using the EuroQol 5-D and quality-adjusted life-years (QALYs) were calculated. Resource utilization and sick leave data were collected by questionnaires. Data were analysed according to the intention-to-treat principle. Missing data were imputed using multiple imputations. Bootstrapping techniques estimated the uncertainty surrounding the cost differences and incremental cost-effectiveness ratios. There were no statistically significant differences in any outcome measure. During pregnancy, total health care costs and costs of productivity losses were statistically non-significant (mean difference €1308; 95%CI €-229 - €3204). The cost-effectiveness analyses showed that the exercise program was not cost-effective in comparison to the control group for blood glucose levels, insulin sensitivity, infant birth weight or QALYs. The twice-weekly exercise program for pregnant women at risk for GDM evaluated in the present study was not cost-effective compared to standard care. Based on these results, implementation of this exercise program for the prevention of GDM cannot be recommended. NTR1139.

Implementation of a low-cost, commercial orbit determination system

NASA Astrophysics Data System (ADS)

Corrigan, Jim

1994-11-01

Traditional satellite and launch control systems have consisted of custom solutions requiring significant development and maintenance costs. These systems have typically been designed to support specific program requirements and are expensive to modify and augment after delivery. The expanding role of space in today's marketplace combined with the increased sophistication and capabilities of modern satellites has created a need for more efficient, lower cost solutions to complete command and control systems. Recent technical advances have resulted in commercial-off-the-shelf products which greatly reduce the complete life-cycle costs associated with satellite launch and control system procurements. System integrators and spacecraft operators have, however, been slow to integrate these commercial based solutions into a comprehensive command and control system. This is due, in part, to a resistance to change and the fact that many available products are unable to effectively communicate with other commercial products. The United States Air Force, responsible for the health and safety of over 84 satellites via its Air Force Satellite Control Network (AFSCN), has embarked on an initiative to prove that commercial products can be used effectively to form a comprehensive command and control system. The initial version of this system is being installed at the Air Force's Center for Research Support (CERES) located at the National Test Facility in Colorado Springs, Colorado. The first stage of this initiative involved the identification of commercial products capable of satisfying each functional element of a command and control system. A significant requirement in this product selection criteria was flexibility and ability to integrate with other available commercial products. This paper discusses the functions and capabilities of the product selected to provide orbit determination functions for this comprehensive command and control system.

Implementation of a low-cost, commercial orbit determination system

NASA Technical Reports Server (NTRS)

Corrigan, Jim

1994-01-01

Traditional satellite and launch control systems have consisted of custom solutions requiring significant development and maintenance costs. These systems have typically been designed to support specific program requirements and are expensive to modify and augment after delivery. The expanding role of space in today's marketplace combined with the increased sophistication and capabilities of modern satellites has created a need for more efficient, lower cost solutions to complete command and control systems. Recent technical advances have resulted in commercial-off-the-shelf products which greatly reduce the complete life-cycle costs associated with satellite launch and control system procurements. System integrators and spacecraft operators have, however, been slow to integrate these commercial based solutions into a comprehensive command and control system. This is due, in part, to a resistance to change and the fact that many available products are unable to effectively communicate with other commercial products. The United States Air Force, responsible for the health and safety of over 84 satellites via its Air Force Satellite Control Network (AFSCN), has embarked on an initiative to prove that commercial products can be used effectively to form a comprehensive command and control system. The initial version of this system is being installed at the Air Force's Center for Research Support (CERES) located at the National Test Facility in Colorado Springs, Colorado. The first stage of this initiative involved the identification of commercial products capable of satisfying each functional element of a command and control system. A significant requirement in this product selection criteria was flexibility and ability to integrate with other available commercial products. This paper discusses the functions and capabilities of the product selected to provide orbit determination functions for this comprehensive command and control system.

Automation of testing modules of controller ELSY-ТМК

NASA Astrophysics Data System (ADS)

Dolotov, A. E.; Dolotova, R. G.; Petuhov, D. V.; Potapova, A. P.

2017-01-01

In modern life, there are means for automation of various processes which allow one to provide high quality standards of released products and to raise labour efficiency. In the given paper, the data on the automation of the test process of the ELSY-TMK controller [1] is presented. The ELSY-TMK programmed logic controller is an effective modular platform for construction of automation systems for small and average branches of industrial production. The modern and functional standard of communication and open environment of the logic controller give a powerful tool of wide spectrum applications for industrial automation. The algorithm allows one to test controller modules by operating the switching system and external devices faster and at a higher level of quality than a human without such means does.

Wheat forecast economics effect study. [value of improved information on crop inventories, production, imports and exports

NASA Technical Reports Server (NTRS)

Mehra, R. K.; Rouhani, R.; Jones, S.; Schick, I.

1980-01-01

A model to assess the value of improved information regarding the inventories, productions, exports, and imports of crop on a worldwide basis is discussed. A previously proposed model is interpreted in a stochastic control setting and the underlying assumptions of the model are revealed. In solving the stochastic optimization problem, the Markov programming approach is much more powerful and exact as compared to the dynamic programming-simulation approach of the original model. The convergence of a dual variable Markov programming algorithm is shown to be fast and efficient. A computer program for the general model of multicountry-multiperiod is developed. As an example, the case of one country-two periods is treated and the results are presented in detail. A comparison with the original model results reveals certain interesting aspects of the algorithms and the dependence of the value of information on the incremental cost function.

Washington's energy mess: after ten years of Federal meddling in the oil business, we're over a barrel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawyer, J.

1980-09-01

New regulations in response to a 1970 call for decontrolling the petroleum industry encouraged foreign production and imports while discouraging domestic exploration. The oil industry was strong enough to profit from government programs, but not enough to prevent pervasive interference in its operations and investments. The result has been supply disruptions and more dependence on foreign oil. The price control system operating during the 1970s had no provision for inflation and was biased toward refineries having access to domestic crude oil. This led to an entitlements program that modified competition further. A review of these and other programs, such asmore » the mandatory crude-oil buy/sell program, shows how they altered the relationships between suppliers and buyers. The 1980 Windfall Profit Tax continues a decade of favoring foreign production, reflecting public aversion to true decontrol, and a public addiction to Federal intervention. (DCK)« less

Pharmacy-based distribution system for enteral nutrition products.

PubMed

Craig, S A; Paulson, M F

1985-12-01

A hospital pharmacy department's implementation of enteral nutrition product distribution and its proposal for an enteral nutrition product admixture service are described. Responsibility for the distribution of enteral nutrition formulations was transferred from the central distribution department to the pharmacy after problems with inventory control, billing procedures, and inappropriate administration of enteral nutrition products were recognized by personnel from the central-distribution area and nutrition services. After additional problems were identified using a multi-disciplinary approach, the pharmacy department implemented an enteral nutrition product distribution system and developed an enteral nutrition product formulary. A proposal was developed for a pharmacy-based enteral nutrition admixture service, but implementation of this service was deferred because data from a cost-effectiveness evaluation and random bacteriologic monitoring did not justify adding the service. Pharmacy-based distribution and formulary control of enteral nutrition products alleviated problems with inaccurate patient charges and accumulation of stock on the nursing units. Pharmacists at this hospital hope to develop an enteral nutrition product admixture program that will result in cost savings for the institution.

Brain Training in Children and Adolescents: Is It Scientifically Valid?

PubMed

Rossignoli-Palomeque, Teresa; Perez-Hernandez, Elena; González-Marqués, Javier

2018-01-01

Background: Brain training products are becoming increasingly popular for children and adolescents. Despite the marketing aimed at their use in the general population, these products may provide more benefits for specific neurologically impaired populations. A review of Brain Training (BT) products analyzing their efficacy while considering the methodological limitations of supporting research is required for practical applications. Method: searches were made of the PubMed database (until March 2017) for studies including: (1) empirical data on the use of brain training for children or adolescents and any effects on near transfer (NT) and/or far transfer (FT) and/or neuroplasticity, (2) use of brain training for cognitive training purposes, (3) commercially available training applications, (4) computer-based programs for children developed since the 1990s, and (5) relevant printed and peer-reviewed material. Results: Database searches yielded a total of 16,402 references, of which 70 met the inclusion criteria for the review. We classified programs in terms of neuroplasticity, near and far transfer, and long-term effects and their applied methodology. Regarding efficacy, only 10 studies (14.2%) have been found that support neuroplasticity, and the majority of brain training platforms claimed to be based on such concepts without providing any supporting scientific data. Thirty-six studies (51.4%) have shown far transfer (7 of them are non-independent) and only 11 (15.7%) maintained far transfer at follow-up. Considering the methodology, 40 studies (68.2%) were not randomized and controlled; for those randomized, only 9 studies (12.9%) were double-blind, and only 13 studies (18.6%) included active controls in their trials. Conclusion: Overall, few independent studies have found far transfer and long-term effects. The majority of independent results found only near transfer. There is a lack of double-blind randomized trials which include an active control group as well as a passive control to properly control for contaminant variables. Based on our results, Brain Training Programs as commercially available products are not as effective as first expected or as they promise in their advertisements.

Brain Training in Children and Adolescents: Is It Scientifically Valid?

PubMed Central

Rossignoli-Palomeque, Teresa; Perez-Hernandez, Elena; González-Marqués, Javier

2018-01-01

Background: Brain training products are becoming increasingly popular for children and adolescents. Despite the marketing aimed at their use in the general population, these products may provide more benefits for specific neurologically impaired populations. A review of Brain Training (BT) products analyzing their efficacy while considering the methodological limitations of supporting research is required for practical applications. Method: searches were made of the PubMed database (until March 2017) for studies including: (1) empirical data on the use of brain training for children or adolescents and any effects on near transfer (NT) and/or far transfer (FT) and/or neuroplasticity, (2) use of brain training for cognitive training purposes, (3) commercially available training applications, (4) computer-based programs for children developed since the 1990s, and (5) relevant printed and peer-reviewed material. Results: Database searches yielded a total of 16,402 references, of which 70 met the inclusion criteria for the review. We classified programs in terms of neuroplasticity, near and far transfer, and long-term effects and their applied methodology. Regarding efficacy, only 10 studies (14.2%) have been found that support neuroplasticity, and the majority of brain training platforms claimed to be based on such concepts without providing any supporting scientific data. Thirty-six studies (51.4%) have shown far transfer (7 of them are non-independent) and only 11 (15.7%) maintained far transfer at follow-up. Considering the methodology, 40 studies (68.2%) were not randomized and controlled; for those randomized, only 9 studies (12.9%) were double-blind, and only 13 studies (18.6%) included active controls in their trials. Conclusion: Overall, few independent studies have found far transfer and long-term effects. The majority of independent results found only near transfer. There is a lack of double-blind randomized trials which include an active control group as well as a passive control to properly control for contaminant variables. Based on our results, Brain Training Programs as commercially available products are not as effective as first expected or as they promise in their advertisements. PMID:29780336

Measuring the effectiveness of the episodic control program Spare the Air in the San Francisco Bay Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, T.G.; Hinman, T.T.

1997-12-31

Episodic control programs that ask the public to voluntarily reduce activities that pollute on days when ozone excesses are predicted are now operating in many parts of the country. The activities include driving, using consumer products that contain reactive organic compounds and lawn and garden equipment with small gasoline engines like lawn mowers and leaf blowers. The effectiveness of these programs as public education tools, their impact in changing behavior and their potential as control tools needs to be assessed. In the nine-county San Francisco Bay Area the Spare the Air program has been operating for five years. The programmore » has a strong employer component as well as a program directed at the general public. During the 1996 ozone season, the Bay Area AQMD, in cooperation with the business community, used several methods to assess awareness and behavior change on Spare the Air days. This included telephone public opinion surveys, a pilot program that offered free transit for employees at 8 companies with measurement feedback from the companies, a telecommuting web page that measured participation, a special carpool matching program and a broad based Capture the Credit initiative by business. This paper describes these initiatives, their results and the next steps anticipated for the 1997 program.« less

Development of Constellation's Launch Control System

NASA Technical Reports Server (NTRS)

Lougheed, Kirk D.; Peaden, Cary J.

2010-01-01

The paper focuses on the National Aeronautics and Space Administration (NASA) Constellation Program's Launch Control System (LCS) development effort at Kennedy Space Center (KSC). It provides a brief history of some preceding efforts to provide launch control and ground processing systems for other NASA programs, and some lessons learned from those experiences. It then provides high level descriptions of the LCS mission, objectives, organization, architecture, and progress. It discusses some of our development tenets, including our use of standards based design and use of off-the-shelf products whenever possible, incremental development cycles, and highly reliable, available, and supportable enterprise class system servers. It concludes with some new lessons learned and our plans for the future.

Electrochemical air revitalization system optimization investigation

NASA Technical Reports Server (NTRS)

Woods, R. R.; Schubert, F. H.; Hallick, T. M.

1975-01-01

A program to characterize a Breadboard of an Electrochemical Air Revitalization System (BEARS) was successfully completed. The BEARS is composed of three components: (1) a water vapor electrolysis module (WVEM) for O2 production and partial humidity control, (2) an electrochemical depolarized carbon dioxide concentrator module (EDCM) for CO2 control, and (3) a power-sharing controller, designed to utilize the power produced by the EDCM to partially offset the WVEM power requirements. It is concluded from the results of this work that the concept of electrochemical air revitalization with power-sharing is a viable solution to the problem of providing a localized topping force for O2 generation, CO2 removal and partial humidity control aboard manned spacecraft. Continued development of the EARS concept is recommended, applying the operational experience and limits identified during the BEARS program to testing of a one-man capacity system and toward the development of advanced system controls to optimize EARS operation for given interfaces and requirements. Successful completion of this development will produce timely technology necessary to plan future advanced environmental control and life support system programs and experiments.

Control of Listeria species food safety at a poultry food production facility.

PubMed

Fox, Edward M; Wall, Patrick G; Fanning, Séamus

2015-10-01

Surveillance and control of food-borne human pathogens, such as Listeria monocytogenes, is a critical aspect of modern food safety programs at food production facilities. This study evaluated contamination patterns of Listeria species at a poultry food production facility, and evaluated the efficacy of procedures to control the contamination and transfer of the bacteria throughout the plant. The presence of Listeria species was studied along the production chain, including raw ingredients, food-contact, non-food-contact surfaces, and finished product. All isolates were sub-typed by pulsed-field gel electrophoresis (PFGE) to identify possible entry points for Listeria species into the production chain, as well as identifying possible transfer routes through the facility. The efficacy of selected in-house sanitizers against a sub-set of the isolates was evaluated. Of the 77 different PFGE-types identified, 10 were found among two or more of the five categories/areas (ingredients, food preparation, cooking and packing, bulk packing, and product), indicating potential transfer routes at the facility. One of the six sanitizers used was identified as unsuitable for control of Listeria species. Combining PFGE data, together with information on isolate location and timeframe, facilitated identification of a persistent Listeria species contamination that had colonized the facility, along with others that were transient. Copyright © 2015 Elsevier Ltd. All rights reserved.

The USA National Phenology Network: A national science and monitoring program for understanding climate change

NASA Astrophysics Data System (ADS)

Weltzin, J.

2009-04-01

Patterns of phenology for plants and animals control ecosystem processes, determine land surface properties, control biosphere-atmosphere interactions, and affect food production, health, conservation, and recreation. Although phenological data and models have applications related to scientific research, education and outreach, agriculture, tourism and recreation, human health, and natural resource conservation and management, until recently there was no coordinated effort to understand phenology at the national scale in the United States. The USA National Phenology Network (USA-NPN; www.usanpn.org), established in 2007, is an emerging and exciting partnership between federal agencies, the academic community, and the general public to establish a national science and monitoring initiative focused on phenology. The first year of operation of USA-NPN produced many new phenology products and venues for phenology research and citizen involvement. Products include a new web-site (www.usanpn.org) that went live in June 2008; the web-site includes a tool for on-line data entry, and serves as a clearinghouse for products and information to facilitate research and communication related to phenology. The new core Plant Phenology Program includes profiles for 200 vetted local, regional, and national plant species with descriptions and (BBCH-consistent) monitoring protocols, as well as templates for addition of new species. A partnership program describes how other monitoring networks can engage with USA-NPN to collect, manage or disseminate phenological information for science, health, education, management or predictive service applications. Project BudBurst, a USA-NPN field campaign for citizen scientists, went live in February 2008, and now includes over 3000 registered observers monitoring 4000 plants across the nation. For 2009 and beyond, we will initiate a new Wildlife Phenology Program, create an on-line clearing-house for phenology education and outreach, strengthen our national land surface phenology program, continue the development of regional phenology networks, and improve tools for data entry, download and visualization.

40 CFR 82.11 - Exports of class I controlled substances to Article 5 Parties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Production and Consumption...) CFC-11 Honeywell 7,150 Sigma Aldrich 1 CFC-113 Fisher Scientific 5 Honeywell 313,686 Sigma Aldrich 48...

7 CFR 58.141 - Alternate quality control program.

Code of Federal Regulations, 2010 CFR

2010-01-01

....141 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT...

Joint Robotics Program

DTIC Science & Technology

2008-04-23

Kotler , P.M. (1997). Marketing management: Analysis, planning, implementation, and control. Upper Saddle River, NJ: Prentice Hall...needed to provide needed items. Production needed to be stable so suppliers could more easily meet demand ( Kotler , 1997, pp. 214-215). The Robotics

MERCURY MEASUREMENTS USING DIRECT-ANALYZER METHODOLOGY

EPA Science Inventory

Under EPA's Water Quality Research Program, exposure studies are needed to determine how well control strategies and guidance are working. Consequently, reliable and convenient techniques that minimize waste production are of special interest. While traditional methods for determ...

Bangladesh's SMP earns top marks.

PubMed

1984-01-01

A recent evaluation funded by the US Agency for International Development (AID) confirms that Bangladesh's contraceptive social marketing program has exceeded its planner's goals and demonstrated the ability of such a system to widely distribute contraceptive products at a low cost. The project, which began contraceptive sales in 1975, distributes condoms, oral contraceptives, and foaming vaginal tablets. Almost 25% of contraceptive users in Bangladesh are serviced by the social marketing program. By the end of 1983, the program was providing 1,022,000 couple years of protection; this included 84 million condoms, 1.7 million pill cycles, and 5.1 million spermicidal tablets each year. The program's cost for 1 couple year of protection is US$1.66. Social marketing sales have accounted for all increases in couple years of protection experienced by the country's national population program since 1975. Sales have been boosted by recent efforts to draw rural medical practitioners into family planning activities. Mobile film units have further increased sales. The USAID report identifies 3 elements that have spearheaded the social marketing program's achievements: 1) the existence of a committed core management team, 2) the granting of autonomy to make daily decisions to this management team, and 3) central control fo the product distribution system by management rather than by subcontractors. Overall, the social marketing program is credited with legitimizing discussion of contraception in a country formerly considered too conservative to tolerate open product promotion.

Short-rotation management of Eucalyptus: Guidelines for plantations in Hawaii. Forest Service general technical report (Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitesell, C.D.; DeBell, D.S.; Schubert, T.H.

1992-11-01

A 10-year research and development program was conducted on the island of Hawaii, where nearly 230,000 acres are suitable for growing biomass in short-rotation Eucalyptus plantations. Successful techniques are described for seedling production, plantation establishment (site preparation, weed control, planting), maintenance (weed control, fertilization), biomass yield estimation, and harvest. Basic biological relationships are described to aid decisions on site selection, initial spacing, fertilizer schedules, and rotation length. Environmental issues likely to be faced by growers of Eucalyptus plantations are discussed, including soil erosion, nutrient depletion, and monocultures. Continuing programs for tree improvement, monitoring, and silviculture research are recommeded. Production costsmore » for biomass yields are estimated for three promising management regimes, representing pure Eucalyptus plantings at dense and wide spacings and a mixed species plantation where Albizia is used as a nurse crop to provide nitrogen needed for optimum Eucalyptus growth.« less

Walk-through survey report: Control technology for metal reclamation industries at Exide/General Battery Corporation, Reading, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, R.M.

1994-03-30

A walk through survey was made at Exide/General Battery Corporation, Reading, Pennsylvania to identify and evaluate control methods to reduce lead exposure. About 20,000 to 25,000 batteries a day were recycled, primarily automobile batteries. Lead and plastic from the batteries were reclaimed. The company used local exhaust ventilation, enclosed ventilated booths, partial enclosures, and automated operations throughout production areas of the site. Various occupational safety and health programs were in place including occupational and safety training, a respiratory protection program, various hygiene programs, and blood lead monitoring programs. These findings will be compared with those from other sites and themore » facility with the lowest lead exposure levels will be examined carefully so that others may be brought in line with the best of standards.« less

ProjectHeartforGirls.com: Development of a Web-Based HIV/STD Prevention Program for Adolescent Girls Emphasizing Sexual Communication Skills.

PubMed

Widman, Laura; Golin, Carol E; Noar, Seth M; Massey, Joy; Prinstein, Mitchell J

2016-10-01

This article describes the development of ProjectHeartforGirls.com , an interactive web-based program designed to improve sexual communication skills and reduce the risk of HIV/STDs among adolescent girls, a population at heightened risk for negative sexual health outcomes (Centers for Disease Control and Prevention, 2013). Although sexual communication is a critical predictor of safer sex among teens, there are few online interventions that target these skills as a central program component. We developed ProjectHeartforGirls.com to fill this gap. Program development involved (1) identifying the target population (ethnically diverse high school girls), (2) clarifying the theoretical foundation (Reasoned Action Model), (3) conducting formative qualitative research (n = 25 girls), (4) drafting initial program content, (5) receiving ongoing feedback from a teen advisory board (n = 5 girls), (6) programming online content, and (7) conducting usability testing (n = 6 girls). These steps are described along with the final intervention product, which is currently being evaluated in a randomized controlled trial.

Steady, oscillatory, and unsteady subsonic Aerodynamics, production version 1.1 (SOUSSA-P1.1). Volume 2: User/programmer manual

NASA Technical Reports Server (NTRS)

Smolka, S. A.; Preuss, R. D.; Tseng, K.; Morino, L.

1980-01-01

A user/programmer manual for the computer program SOUSSA P 1.1 is presented. The program was designed to provide accurate and efficient evaluation of steady and unsteady loads on aircraft having arbitrary shapes and motions, including structural deformations. These design goals were in part achieved through the incorporation of the data handling capabilities of the SPAR finite element Structural Analysis computer program. As a further result, SOUSSA P possesses an extensive checkpoint/ restart facility. The programmer's portion of this manual includes overlay/subroutine hierarchy, logical flow of control, definition of SOUSSA P 1.1 FORTRAN variables, and definition of SOUSSA P 1.1 subroutines. Purpose of the SOUSSA P 1.1 modules, input data to the program, output of the program, hardware/software requirements, error detection and reporting capabilities, job control statements, a summary of the procedure for running the program and two test cases including input and output and listings are described in the user oriented portion of the manual.

Traditional versus rule-based programming techniques: Application to the control of optional flight information

NASA Technical Reports Server (NTRS)

Ricks, Wendell R.; Abbott, Kathy H.

1987-01-01

To the software design community, the concern over the costs associated with a program's execution time and implementation is great. It is always desirable, and sometimes imperative, that the proper programming technique is chosen which minimizes all costs for a given application or type of application. A study is described that compared cost-related factors associated with traditional programming techniques to rule-based programming techniques for a specific application. The results of this study favored the traditional approach regarding execution efficiency, but favored the rule-based approach regarding programmer productivity (implementation ease). Although this study examined a specific application, the results should be widely applicable.

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, Charlie; Crook, Jerry

1997-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for a generic, advanced engine control system that will result in lower software maintenance (operations) costs. It effectively accommodates software requirements changes that occur due to hardware. technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives and benefits of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishment are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software, architecture, reuse software, and reduced software reverification time related to software changes. Currently, the program is focused on supporting MSFC in accomplishing a Space Shuttle Main Engine (SSME) hot-fire test at Stennis Space Center and the Low Cost Boost Technology (LCBT) Program.

Development of Statistical Process Control Methodology for an Environmentally Compliant Surface Cleaning Process in a Bonding Laboratory

NASA Technical Reports Server (NTRS)

Hutchens, Dale E.; Doan, Patrick A.; Boothe, Richard E.

1997-01-01

Bonding labs at both MSFC and the northern Utah production plant prepare bond test specimens which simulate or witness the production of NASA's Reusable Solid Rocket Motor (RSRM). The current process for preparing the bonding surfaces employs 1,1,1-trichloroethane vapor degreasing, which simulates the current RSRM process. Government regulations (e.g., the 1990 Amendments to the Clean Air Act) have mandated a production phase-out of a number of ozone depleting compounds (ODC) including 1,1,1-trichloroethane. In order to comply with these regulations, the RSRM Program is qualifying a spray-in-air (SIA) precision cleaning process using Brulin 1990, an aqueous blend of surfactants. Accordingly, surface preparation prior to bonding process simulation test specimens must reflect the new production cleaning process. The Bonding Lab Statistical Process Control (SPC) program monitors the progress of the lab and its capabilities, as well as certifies the bonding technicians, by periodically preparing D6AC steel tensile adhesion panels with EA-91 3NA epoxy adhesive using a standardized process. SPC methods are then used to ensure the process is statistically in control, thus producing reliable data for bonding studies, and identify any problems which might develop. Since the specimen cleaning process is being changed, new SPC limits must be established. This report summarizes side-by-side testing of D6AC steel tensile adhesion witness panels and tapered double cantilevered beams (TDCBs) using both the current baseline vapor degreasing process and a lab-scale spray-in-air process. A Proceco 26 inches Typhoon dishwasher cleaned both tensile adhesion witness panels and TDCBs in a process which simulates the new production process. The tests were performed six times during 1995, subsequent statistical analysis of the data established new upper control limits (UCL) and lower control limits (LCL). The data also demonstrated that the new process was equivalent to the vapor degreasing process.

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

Optical system design, analysis, and production; Proceedings of the Meeting, Geneva, Switzerland, April 19-22, 1983

NASA Astrophysics Data System (ADS)

Rogers, P. J.; Fischer, R. E.

1983-01-01

Topics considered include: optical system requirements, analysis, and system engineering; optical system design using microcomputers and minicomputers; optical design theory and computer programs; optical design methods and computer programs; optical design methods and philosophy; unconventional optical design; diffractive and gradient index optical system design; optical production and system integration; and optical systems engineering. Particular attention is given to: stray light control as an integral part of optical design; current and future directions of lens design software; thin-film technology in the design and production of optical systems; aspherical lenses in optical scanning systems; the application of volume phase holograms to avionic displays; the effect of lens defects on thermal imager performance; and a wide angle zoom for the Space Shuttle.

Controlled ecological life support systems (CELSS) flight experimentation

NASA Technical Reports Server (NTRS)

Kliss, M.; Macelroy, R.; Borchers, B.; Farrance, M.; Nelson, T.; Blackwell, C.; Yendler, B.; Tremor, J.

1994-01-01

The NASA CELSS program has the goal of developing life support systems for humans in space based on the use of higher plants. The program has supported research at universities with a primary focus of increasing the productivity of candidate crops plants. To understand the effects of the space environment on plant productivity, the CELSS Test Facility (CTF) has been conceived as an instrument that will permit the evaluation of plant productivity on Space Station Freedom. The CTF will maintain specific environmental conditions and collect data on gas exchange rates and biomass accumulation over the growth period of several crop plants grown sequentially from seed to harvest. The science requirements for the CTF will be described, as will current design concepts and specific technology requirements for operation in micro-gravity.

The Brucellosis Eradication Program in Texas

DTIC Science & Technology

1983-09-01

humans acquire the disease from infected animals or dnimal by-products, such as milk , cheese and other dairy products. Texas initiated a brucellosis...that tests composite raw milk samples from dairies to detect infected herds. ELISA - Enzyme Linked Immunosorbent Assay. A highly sensitive laboratory...concerned about the disease brucellosis because it is truly a zoonotic disease. Control of the disease therefore, depends primarily on elimination of the

Configuration management plan. System definition and project development. Repository Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

Mckay, Charles

1991-01-01

This is the configuration management Plan for the AdaNet Repository Based Software Engineering (RBSE) contract. This document establishes the requirements and activities needed to ensure that the products developed for the AdaNet RBSE contract are accurately identified, that proposed changes to the product are systematically evaluated and controlled, that the status of all change activity is known at all times, and that the product achieves its functional performance requirements and is accurately documented.

Aquatic Plant Control Research Program: Review of Senescence as an Important Factor Determining the Relationship Among Aquatic Plants, Their Epiphytes, and Pathogens

DTIC Science & Technology

1989-04-01

Effect of Myriophyllum apicatwv on the Primary Production of Phytoplankton," Developments in Hydrobiology , Vol 17, pp 227-233. Godmaire, H., and...in delaying senescence. The action of light in retarding senescence has been attributed by many authors to its role in photosynthetic production of...Weber and Nooden 1974). High concentrations of CO2 are known to increase the biomass production and accelerate senescence in ter- restrial plants (Omar

Air toxics evaluation of ABB Combustion Engineering Low-Emission Boiler Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wesnor, J.D.

1993-10-26

The specific goals of the program are to identify air toxic compounds that might be emmitted from the new boiler with its various Air Pollution Control device for APCD alternatives in levels of regulatory concern. For the compounds thought to be of concern, potential air toxic control methodologies will be suggested and a Test Protocol will be written to be used in the Proof of Concept and full scale tests. The following task was defined: Define Replations and Standards; Identify Air Toxic Pollutants of Interest to Interest to Utility Boilers; Assesment of Air Toxic By-Products; State of the Art Assessmentmore » of Toxic By-Product Control Technologies; and Test Protocol Definition.« less

Climatological Processing of Radar Data for the TRMM Ground Validation Program

NASA Technical Reports Server (NTRS)

Kulie, Mark; Marks, David; Robinson, Michael; Silberstein, David; Wolff, David; Ferrier, Brad; Amitai, Eyal; Fisher, Brad; Wang, Jian-Xin; Augustine, David;

Medical cost savings for participants and nonparticipants in health risk assessments, lifestyle management, disease management, depression management, and nurseline in a large financial services corporation.

PubMed

Serxner, Seth; Alberti, Angela; Weinberger, Sarah

2012-01-01

To compare changes in medical costs between participants and nonparticipants in five different health and productivity management (HPM) programs. Quasi-experimental pre/post intervention study. A large financial services corporation. A cohort population of employees enrolled in medical plans (n  =  49,723) [corrected]. A comprehensive HPM program, which addressed health risks, acute and chronic conditions, and psychosocial disorders from 2005 to 2007. Incentives were used to encourage health risk assessment participation in years 2 and 3. Program participation and medical claims data were collected for members at the end of each program year to assess the change in total costs from the baseline period. Analysis . Multivariate analyses for participation categories were conducted comparing baseline versus program year cost differences, controlling for demographics. All participation categories yielded a lower cost increase compared to nonparticipation and a positive return on investment (ROI) for years 2 and 3, resulting in a 2.45∶1 ROI for the combined program years. Medical cost savings exceeded program costs in a wide variety of health and productivity management programs by the second year.

Multi-axis control based on movement control cards in NC systems

NASA Astrophysics Data System (ADS)

Jiang, Tingbiao; Wei, Yunquan

2005-12-01

Today most movement control cards need special control software of topper computers and are only suitable for fixed-axis controls. Consequently, the number of axes which can be controlled is limited. Advanced manufacture technology develops at a very high speed, and that development brings forth. New requirements for movement control in mechanisms and electronics. This paper introduces products of the 5th generation of movement control cards, PMAC 2A-PC/104, made by the Delta Tau Company in the USA. Based on an analysis of PMAC 2A-PC/104, this paper first describes two aspects relevant to the hardware structure of movement control cards and the interrelated software of the topper computers. Then, two methods are presented for solving these problems. The first method is to set limit switches on the movement control cards; all of them can be used to control each moving axis. The second method is to program applied software with existing programming language (for example, VC ++, Visual Basic, Delphi, and so forth). This program is much easier to operate and expand by its users. By using a limit switch, users can choose different axes in movement control cards. Also, users can change parts of the parameters in the control software of topper computers to realize different control axes. Combining these 2 methods proves to be convenient for realizing multi-axis control in numerical control systems.

78 FR 16532 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

..., Inc. of Tortola, the British Virgin Islands (collectively, ``Rovi''). 76 FR 79214-5 (Dec. 21, 2011... Group Corp. of Shandong, China (``HGC''); and Haier America of New York, New York (``Haier America'') as...

9 CFR 83.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE... this chapter, to perform official animal health work of the Animal and Plant Health Inspection Service...-Federal disease control and eradication programs. Administrator. The Administrator, Animal and Plant...

9 CFR 83.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE... this chapter, to perform official animal health work of the Animal and Plant Health Inspection Service...-Federal disease control and eradication programs. Administrator. The Administrator, Animal and Plant...

9 CFR 83.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE... this chapter, to perform official animal health work of the Animal and Plant Health Inspection Service...-Federal disease control and eradication programs. Administrator. The Administrator, Animal and Plant...

9 CFR 83.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE... this chapter, to perform official animal health work of the Animal and Plant Health Inspection Service...-Federal disease control and eradication programs. Administrator. The Administrator, Animal and Plant...

Application of Statistical Quality Control Techniques to Detonator Fabrication: Feasibility Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, J. Frank

1971-05-20

A feasibility study was performed on the use of process control techniques which might reduce the need for a duplicate inspection by production inspection and quality control inspection. Two active detonator fabrication programs were selected for the study. Inspection areas accounting for the greatest percentage of total inspection costs were selected by applying "Pareto's Principle of Maldistribution." Data from these areas were then gathered and analyzed by a process capabiltiy study.

Computer numerical control grinding of spiral bevel gears

NASA Technical Reports Server (NTRS)

Scott, H. Wayne

1991-01-01

The development of Computer Numerical Control (CNC) spiral bevel gear grinding has paved the way for major improvement in the production of precision spiral bevel gears. The object of the program was to decrease the setup, maintenance of setup, and pattern development time by 50 percent of the time required on conventional spiral bevel gear grinders. Details of the process are explained.

Real Time Quality Control Methods for Cued EMI Data Collection

DTIC Science & Technology

2016-03-14

contents be construed as reflecting the official policy or position of the Department of Defense. Reference herein to any specific commercial product...This project evaluated the effectiveness of in-field quality control (QC) procedures during cued electromagnetic induction (EMI) data collection. The...electromagnetic induction ESTCP Environmental Security Technology Certification Program hr hour ISO Industry Standard Object IVS Instrument

Development and Exchange of Instructional Resources in Water Quality Control Programs, IV: Selecting Instructional Media and Instructional Systems.

ERIC Educational Resources Information Center

Durham, W. Harry; And Others

This document is one of a series of reports which reviews instructional materials and equipment for water and wastewater treatment plant personnel. A system is presented to assist in standardizing the production of lesson plans and instructional materials in the water quality control field. A procedure for selecting appropriate instructional media…

Design and performance of the KSC Biomass Production Chamber

NASA Technical Reports Server (NTRS)

Prince, Ralph P.; Knott, William M.; Sager, John C.; Hilding, Suzanne E.

1987-01-01

NASA's Controlled Ecological Life Support System program has instituted the Kennedy Space Center 'breadboard' project of which the Biomass Production Chamber (BPC) presently discussed is a part. The BPC is based on a modified hypobaric test vessel; its design parameters and operational parameters have been chosen in order to meet a wide range of plant-growing objectives aboard future spacecraft on long-duration missions. A control and data acquisition subsystem is used to maintain a common link between the heating, ventilation, and air conditioning system, the illumination system, the gas-circulation system, and the nutrient delivery and monitoring subsystems.

Cargo Movement Operations System (CMOS) Draft Software Product Specification, Increment I

DTIC Science & Technology

1990-12-13

NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT STATUS: OPEN [ ] CLOSED [ ] Cmnt Page Paragraph No. No. Number Comment 1. 2 1.3 Delete "Software Product Specification" from lines 4 & 5 of the first paragraph. 2. 11 3.4 Change "Table 3.4" to "Appendix E". 3. App B (all) Change the term "Deskview" used to describe the development language to "DESQview". ORIGINATOR CONTROL NUMBER: SPS1-0002 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM DISCREPANCY WORKSHEET CDRL NUMBER: A014-02 DATE: 12/13/90 ORIGINATOR NAME:

Program Manager: Journal of the Defense Systems Management College. Volume 17, Number 4, July-August 1988

DTIC Science & Technology

1988-08-01

occurrences. Management Collge . Program Manager 22 Julv-August 1988 .K % € 4...playing parts in developingProductivity Measurement. 2 Selec- Q4: Out-going quality control the guide hope it will do the tion of physical , temporal...Management Collge byThe Honorable Bill Nichols, Democratk • The Congress emphasized educa- o ngressmanfrom Alabama, to the Army -neatly and give the

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD) - IPAD user requirements

NASA Technical Reports Server (NTRS)

Anderton, G. L.

1979-01-01

Results of a requirements analysis task for Integrated Programs for Aerospace Vehicle Design (IPAD) are presented. User requirements which, in part, will shape the IPAD system design are given. Requirements considered were: generation, modification, storage, retrieval, communication, reporting, and protection of information. Data manipulation and controls on the system and the information were also considered. Specific needs relative to the product design process are also discussed.

Salmonella and eggs: from production to plate.

PubMed

Whiley, Harriet; Ross, Kirstin

2015-02-26

Salmonella contamination of eggs and egg shells has been identified as a public health concern worldwide. A recent shift in consumer preferences has impacted on the egg industry, with a push for cage-free egg production methods. There has also been an increased desire from consumers for raw and unprocessed foods, potentially increasing the risk of salmonellosis. In response to these changes, this review explores the current literature regarding Salmonella contamination of eggs during the production processing through to food handling protocols. The contamination of eggs with Salmonella during the production process is a complex issue, influenced by many variables including flock size, flock age, stress, feed, vaccination, and cleaning routines. Currently there is no consensus regarding the impact of caged, barn and free range egg production has on Salmonella contamination of eggs. The literature regarding the management and control strategies post-collection, during storage, transport and food handling is also reviewed. Pasteurisation and irradiation were identified as the only certain methods for controlling Salmonella and are essential for the protection of high risk groups, whereas control of temperature and pH were identified as potential control methods to minimise the risk for foods containing raw eggs; however, further research is required to provide more detailed control protocols and education programs to reduce the risk of salmonellosis from egg consumption.

Salmonella and Eggs: From Production to Plate

PubMed Central

Whiley, Harriet; Ross, Kirstin

2015-01-01

Salmonella contamination of eggs and egg shells has been identified as a public health concern worldwide. A recent shift in consumer preferences has impacted on the egg industry, with a push for cage-free egg production methods. There has also been an increased desire from consumers for raw and unprocessed foods, potentially increasing the risk of salmonellosis. In response to these changes, this review explores the current literature regarding Salmonella contamination of eggs during the production processing through to food handling protocols. The contamination of eggs with Salmonella during the production process is a complex issue, influenced by many variables including flock size, flock age, stress, feed, vaccination, and cleaning routines. Currently there is no consensus regarding the impact of caged, barn and free range egg production has on Salmonella contamination of eggs. The literature regarding the management and control strategies post-collection, during storage, transport and food handling is also reviewed. Pasteurisation and irradiation were identified as the only certain methods for controlling Salmonella and are essential for the protection of high risk groups, whereas control of temperature and pH were identified as potential control methods to minimise the risk for foods containing raw eggs; however, further research is required to provide more detailed control protocols and education programs to reduce the risk of salmonellosis from egg consumption. PMID:25730295

Parallelizing Compiler Framework and API for Power Reduction and Software Productivity of Real-Time Heterogeneous Multicores

NASA Astrophysics Data System (ADS)

Hayashi, Akihiro; Wada, Yasutaka; Watanabe, Takeshi; Sekiguchi, Takeshi; Mase, Masayoshi; Shirako, Jun; Kimura, Keiji; Kasahara, Hironori

Heterogeneous multicores have been attracting much attention to attain high performance keeping power consumption low in wide spread of areas. However, heterogeneous multicores force programmers very difficult programming. The long application program development period lowers product competitiveness. In order to overcome such a situation, this paper proposes a compilation framework which bridges a gap between programmers and heterogeneous multicores. In particular, this paper describes the compilation framework based on OSCAR compiler. It realizes coarse grain task parallel processing, data transfer using a DMA controller, power reduction control from user programs with DVFS and clock gating on various heterogeneous multicores from different vendors. This paper also evaluates processing performance and the power reduction by the proposed framework on a newly developed 15 core heterogeneous multicore chip named RP-X integrating 8 general purpose processor cores and 3 types of accelerator cores which was developed by Renesas Electronics, Hitachi, Tokyo Institute of Technology and Waseda University. The framework attains speedups up to 32x for an optical flow program with eight general purpose processor cores and four DRP(Dynamically Reconfigurable Processor) accelerator cores against sequential execution by a single processor core and 80% of power reduction for the real-time AAC encoding.

Ecuador project closes shop.

PubMed

1985-01-01

The US Agency for International Development (AID) has discontinued its contraceptive social marketing project in Ecuador after 2 1/2 years without a sale. USAID had awarded a 3-year US$1.2 million grant to the program's contractor, the John Snow Public Health Group Inc. The project was run by Ecuador's national family planning association. This is only the 3rd time USAID has terminated a social marketing program since entering this field in 1973. Impediments to the program's operation included product price hikes and supply shortages as a result of teh inflation and currency devaluation in Ecuador in recent years. Government opposition to the sales of donated contraceptive supplies further set back the program. The name chosen for the condom distributed by the program, Liber, had to be changed since a company importing sanitary napkins was using the name Liberty and objected. The program's peculiar organizational structur is also considered to have played a role in the program's failure. Rather than having a single authority responsible for the program, a 2-headed organizational design was used. Program funds were controlled by the contractor, but the family planning organization managed day to day operations. Unified management has enabled programs in other countries to survive problems such as inflation, brand registration, and product and price approvals.

Economic consequences of paratuberculosis control in dairy cattle: A stochastic modeling study.

PubMed

Smith, R L; Al-Mamun, M A; Gröhn, Y T

2017-03-01

The cost of paratuberculosis to dairy herds, through decreased milk production, early culling, and poor reproductive performance, has been well-studied. The benefit of control programs, however, has been debated. A recent stochastic compartmental model for paratuberculosis transmission in US dairy herds was modified to predict herd net present value (NPV) over 25 years in herds of 100 and 1000 dairy cattle with endemic paratuberculosis at initial prevalence of 10% and 20%. Control programs were designed by combining 5 tests (none, fecal culture, ELISA, PCR, or calf testing), 3 test-related culling strategies (all test-positive, high-positive, or repeated positive), 2 test frequencies (annual and biannual), 3 hygiene levels (standard, moderate, or improved), and 2 cessation decisions (testing ceased after 5 negative whole-herd tests or testing continued). Stochastic dominance was determined for each herd scenario; no control program was fully dominant for maximizing herd NPV in any scenario. Use of the ELISA test was generally preferred in all scenarios, but no paratuberculosis control was highly preferred for the small herd with 10% initial prevalence and was frequently preferred in other herd scenarios. Based on their effect on paratuberculosis alone, hygiene improvements were not found to be as cost-effective as test-and-cull strategies in most circumstances. Global sensitivity analysis found that economic parameters, such as the price of milk, had more influence on NPV than control program-related parameters. We conclude that paratuberculosis control can be cost effective, and multiple control programs can be applied for equivalent economic results. Copyright © 2017 Elsevier B.V. All rights reserved.

EMPRESS: A European Project to Enhance Process Control Through Improved Temperature Measurement

NASA Astrophysics Data System (ADS)

Pearce, J. V.; Edler, F.; Elliott, C. J.; Rosso, L.; Sutton, G.; Andreu, A.; Machin, G.

2017-08-01

A new European project called EMPRESS, funded by the EURAMET program `European Metrology Program for Innovation and Research,' is described. The 3 year project, which started in the summer of 2015, is intended to substantially augment the efficiency of high-value manufacturing processes by improving temperature measurement techniques at the point of use. The project consortium has 18 partners and 5 external collaborators, from the metrology sector, high-value manufacturing, sensor manufacturing, and academia. Accurate control of temperature is key to ensuring process efficiency and product consistency and is often not achieved to the level required for modern processes. Enhanced efficiency of processes may take several forms including reduced product rejection/waste; improved energy efficiency; increased intervals between sensor recalibration/maintenance; and increased sensor reliability, i.e., reduced amount of operator intervention. Traceability of temperature measurements to the International Temperature Scale of 1990 (ITS-90) is a critical factor in establishing low measurement uncertainty and reproducible, consistent process control. Introducing such traceability in situ (i.e., within the industrial process) is a theme running through this project.

Software for Automated Reading of STEP Files by I-DEAS(trademark)

NASA Technical Reports Server (NTRS)

Pinedo, John

2003-01-01

A program called "readstep" enables the I-DEAS(tm) computer-aided-design (CAD) software to automatically read Standard for the Exchange of Product Model Data (STEP) files. (The STEP format is one of several used to transfer data between dissimilar CAD programs.) Prior to the development of "readstep," it was necessary to read STEP files into I-DEAS(tm) one at a time in a slow process that required repeated intervention by the user. In operation, "readstep" prompts the user for the location of the desired STEP files and the names of the I-DEAS(tm) project and model file, then generates an I-DEAS(tm) program file called "readstep.prg" and two Unix shell programs called "runner" and "controller." The program "runner" runs I-DEAS(tm) sessions that execute readstep.prg, while "controller" controls the execution of "runner" and edits readstep.prg if necessary. The user sets "runner" and "controller" into execution simultaneously, and then no further intervention by the user is required. When "runner" has finished, the user should see only parts from successfully read STEP files present in the model file. STEP files that could not be read successfully (e.g., because of format errors) should be regenerated before attempting to read them again.

Systems, methods, and products for graphically illustrating and controlling a droplet actuator

NASA Technical Reports Server (NTRS)

Brafford, Keith R. (Inventor); Pamula, Vamsee K. (Inventor); Paik, Philip Y. (Inventor); Pollack, Michael G. (Inventor); Sturmer, Ryan A. (Inventor); Smith, Gregory F. (Inventor)

2010-01-01

Systems for controlling a droplet microactuator are provided. According to one embodiment, a system is provided and includes a controller, a droplet microactuator electronically coupled to the controller, and a display device displaying a user interface electronically coupled to the controller, wherein the system is programmed and configured to permit a user to effect a droplet manipulation by interacting with the user interface. According to another embodiment, a system is provided and includes a processor, a display device electronically coupled to the processor, and software loaded and/or stored in a storage device electronically coupled to the controller, a memory device electronically coupled to the controller, and/or the controller and programmed to display an interactive map of a droplet microactuator. According to yet another embodiment, a system is provided and includes a controller, a droplet microactuator electronically coupled to the controller, a display device displaying a user interface electronically coupled to the controller, and software for executing a protocol loaded and/or stored in a storage device electronically coupled to the controller, a memory device electronically coupled to the controller, and/or the controller.

Collaboration of chemistry instructional games and group investigation (Gi) model to improve learning outcome in high school students

NASA Astrophysics Data System (ADS)

Puspita, Ita; Sugiyarto, Kristian H.; Ikhsan, Jaslin

2017-05-01

The aims of this research are to: (1) develop chemistry instructional games on reaction rate matter; and (2) reveal the collaboration of chemistry instructional games and group investigation model to improvement learning outcome in high school student. This study is research and development (R&D). The procedure of developing product was adapted from Borg & Gall that modified into three principal steps: product planning, product developing, and product evaluating. The product planning step consist of field study, literature study, and manufacturing product. Product developing was developed product using Adobe Flash Professional CS 6 program. The last, product evaluating was performed by year XI of high school students, uses experimental methods nonequivalent control-group design by control class and experiment class. The results of this research show that: (1) a software of chemistry instructional games successfully developed using Adobe Flash Professional CS 6 and can be run on Android device; and (2) the test results of students showed that the collaboration of instructional games and group investigation model able to improvement learning outcome of hight school student.

Blast optimization for improved dragline productivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphreys, M.; Baldwin, G.

1994-12-31

A project aimed at blast optimization for large open pit coal mines is utilizing blast monitoring and analysis techniques, advanced dragline monitoring equipment, and blast simulation software, to assess the major controlling factors affecting both blast performance and subsequent dragline productivity. This has involved collaborative work between the explosives supplier, mine operator, monitoring equipment manufacturer, and a mining research organization. The results from trial blasts and subsequently monitored dragline production have yielded promising results and continuing studies are being conducted as part of a blast optimization program. It should be stressed that the optimization of blasting practices for improved draglinemore » productivity is a site specific task, achieved through controlled and closely monitored procedures. The benefits achieved at one location can not be simply transferred to another minesite unless similar improvement strategies are first implemented.« less

Resource conservation program in terms of Vostokgazprom environmental policy

NASA Astrophysics Data System (ADS)

Tsibulnikova, M. R.; Nadyumov, S. V.; Adam, A. M.; Korotchenko, T. V.

2016-09-01

The article examines a number of key areas of environmental policy of Vostokgazprom. The Associated Petroleum Gas program is an important step within the resource conservation and environmental protection framework. In addition, the company undertakes the extensive work on emergency response programs, and carries out continuous protection of the subsurface and control over environmental safety in all production sites. Vostokgazprom continuously modernizes the basic industrial facilities and invests money in new projects. The study analyzes the steps being taken by the company within the energy saving policy that leads to significant costs cut.

Publications of the environmental health program: 1980-1990

NASA Technical Reports Server (NTRS)

Wallace-Robinson, Janice; Hess, Elizabeth; Dickson, Katherine J.

1992-01-01

A 10-year cumulative bibliography of publications resulting from research supported by the Environmental Health Program of the Life Sciences Division of NASA is given. The goals of this program are to utilize ground based studies to understand the effects of the spacecraft and EVA environments on humans and other organisms; to specify, measure, and control these environments; and to develop countermeasures, where necessary, to optimize crew health, safety, and productivity. The primary subjects encompassed are barophysiology, toxicology, and microbiology. Principal Investigators whose research tasks resulted in publication are identified.

NASA management of the Space Shuttle Program

NASA Technical Reports Server (NTRS)

Peters, F.

1975-01-01

The management system and management technology described have been developed to meet stringent cost and schedule constraints of the Space Shuttle Program. Management of resources available to this program requires control and motivation of a large number of efficient creative personnel trained in various technical specialties. This must be done while keeping track of numerous parallel, yet interdependent activities involving different functions, organizations, and products all moving together in accordance with intricate plans for budgets, schedules, performance, and interaction. Some techniques developed to identify problems at an early stage and seek immediate solutions are examined.

Flight service evaluation of an advanced composite empennage component on commercial transport aircraft. Phase 1: Engineering development

NASA Technical Reports Server (NTRS)

Ary, A.; Axtell, C.; Fogg, L.; Jackson, A.; James, A. M.; Mosesian, B.; Vanderwier, J.; Vanhamersveld, J.

1976-01-01

The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes the front and rear spars. Various design options were evaluated to arrive at a configuration which would offer the highest potential for satisfying program objectives. The preferred configuration selected consists of a hat-stiffened cover with molded integrally stiffened spars, aluminum trussed composite ribs, and composite miniwich web ribs with integrally molded caps. Material screening tests were performed to select an advanced composite material system for the Advanced Composite Vertical Fin (ACFV) that would meet the program requirements from the standpoint of quality, reproducibility, and cost. Preliminary weight and cost analysis were made, targets established, and tracking plans developed. These include FAA certification, ancillary test program, quality control, and structural integrity control plans.

A Transdisciplinary Training Program for Behavioral Oncology and Cancer Control Scientists

PubMed Central

McDaniel, Anna M.; Champion, Victoria L.; Kroenke, Kurt

2008-01-01

Transdisciplinary health research training has been identified as a major initiative to achieve the vision for research teams of the future as articulated in the NIH Roadmap for Medical Research. To address the need for scientists who can integrate diverse scientific approaches and work in transdisciplinary teams to solve complex health problems, Indiana University has designed an innovative training program that will provide the didactic and research experiences to enable trainees to establish productive careers in behavioral oncology and cancer control research. Development of a successful transdisciplinary training program requires mentorship, research, and a specialized curriculum that encompass a broad range of disciplines. The program capitalizes on a unique set of existing and emerging training opportunities resulting from the collaborative activities of the Indiana University (IU) Simon Cancer Center, the IU Schools of Nursing and Medicine, and multiple research institutes and academic centers located in Indiana and neighboring states. PMID:18501750

An overview of microbial food safety programs in beef, pork, and poultry from farm to processing in Canada.

PubMed

Rajić, Andrijana; Waddell, Lisa A; Sargeant, Jan M; Read, Susan; Farber, Jeff; Firth, Martin J; Chambers, Albert

2007-05-01

Canada's vision for the agri-food industry in the 21st century is the establishment of a national food safety system employing hazard analysis and critical control point (HACCP) principles and microbiological verification tools, with traceability throughout the gate-to-plate continuum. Voluntary on-farm food safety (OFFS) programs, based in part on HACCP principles, provide producers with guidelines for good production practices focused on general hygiene and biosecurity. OFFS programs in beef cattle, swine, and poultry are currently being evaluated through a national recognition program of the Canadian Food Inspection Agency. Mandatory HACCP programs in federal meat facilities include microbial testing for generic Escherichia coli to verify effectiveness of the processor's dressing procedure, specific testing of ground meat for E. coli O157:H7, with zero tolerance for this organism in the tested lot, and Salmonella testing of raw products. Health Canada's policy on Listeria monocytogenes divides ready-to-eat products into three risk categories, with products previously implicated as the source of an outbreak receiving the highest priority for inspection and compliance. A national mandatory identification program to track livestock from the herd of origin to carcass inspection has been established. Can-Trace, a data standard for all food commodities, has been designed to facilitate tracking foods from the point of origin to the consumer. Although much work has already been done, a coherent national food safety strategy and concerted efforts by all stakeholders are needed to realize this vision. Cooperation of many government agencies with shared responsibility for food safety and public health will be essential.

KSC-04pd1398

NASA Image and Video Library

2004-06-30

KENNEDY SPACE CENTER, FLA. - Kimberly Beck is a Controlled Biological Systems trainee in the Spaceflight and Life Sciences Training Program. She is helping with growth studies supporting the WONDER (Water Offset Nutrient Delivery Experiment) flight payload, which is investigating hydroponic plant crop production in microgravity.

AFLP Variation in Populations of Podisus maculiventris

USDA-ARS?s Scientific Manuscript database

We are developing methods to reduce costs of mass producing beneficial insect species for biological control programs. One of our methods entails selecting beneficials for optimal production traits. Currently we are selecting for increased fecundity. Selection protocols, whether based on phenotyp...

Science--A Process Approach, Product Development Report No. 8.

ERIC Educational Resources Information Center

Sanderson, Barbara A.; Kratochvil, Daniel W.

Science - A Process Approach, a science program for grades kindergarten through sixth, mainly focuses on scientific processes: observing, classifying, using numbers, measuring, space/time relationships, communicating, predicting, inferring, defining operationally, formulating hypotheses, interpreting data, controlling variables, and experimenting.…

77 FR 26786 - Certain Products Containing Interactive Program and Parental Control Technology; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

.... of CA; Mitsubishi Digital Electronics America, Inc. of CA; Netflix Inc. of CA; Roku, Inc. of CA; and... public health and welfare in the United States, competitive conditions in the United States economy, the...

KSC-04PD-1398

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. Kimberly Beck is a Controlled Biological Systems trainee in the Spaceflight and Life Sciences Training Program. She is helping with growth studies supporting the WONDER (Water Offset Nutrient Delivery Experiment) flight payload, which is investigating hydroponic plant crop production in microgravity.

76 FR 16760 - Energy Conservation Program for Consumer Products: Publication of the Petition for Waiver and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... anti-sweat heaters. Therefore, it is ordered that: The application for interim waiver filed by Samsung... control anti-sweat heaters according to the alternate test procedure as set forth in section IV...

NOAA's Satellite Climate Data Records: The Research to Operations Process and Current State

NASA Astrophysics Data System (ADS)

Privette, J. L.; Bates, J. J.; Kearns, E. J.; NOAA's Climate Data Record Program

2011-12-01

In support of NOAA's mandate to provide climate products and services to the Nation, the National Climatic Data Center initiated the satellite Climate Data Record (CDR) Program. The Program develops and sustains climate information products derived from satellite data that NOAA has collected over the past 30+ years. These are the longest sets of continuous global measurements in existence. Data from other satellite programs, including those in NASA, the Department of Defense, and foreign space agencies, are also used. NOAA is now applying advanced analysis techniques to these historic data. This process is unraveling underlying climate trend and variability information and returning new value from the data. However, the transition of complex data processing chains, voluminous data products and documentation into an systematic, configuration controlled context involves many challenges. In this presentation, we focus on the Program's process for research-to-operations transition and the evolving systems designed to ensure transparency, security, economy and authoritative value. The Program has adopted a two-phase process defined by an Initial Operational Capability (IOC) and a Full Operational Capability (FOC). The principles and procedures for IOC are described, as well as the process for moving CDRs from IOC to FOC. Finally, we will describe the state of the CDRs in all phases the Program, with an emphasis on the seven community-developed CDRs transitioned to NOAA in 2011. Details on CDR access and distribution will be provided.

Chemistry and quality of Hibiscus (Hibiscus sabdariffa) for developing the natural-product industry in Senegal.

PubMed

Juliani, H R; Welch, C R; Wu, Q; Diouf, B; Malainy, D; Simon, J E

2009-03-01

The objectives of this study were to assess and improve the quality of the hibiscus calyces from Senegal over 2 production seasons (2004 to 2005), to develop and adapt new procedures for the determination of hibiscus anthocyanins and analysis of the 2 major ones, delphinidin-3-sambubioside and cyanidin-3-sambubioside. The foreign matter, total ashes, and acid insoluble ashes showed that the calyces harvested in 2005 were produced following hygienic practices, while the color assessment of the calyces and analysis of hibiscus active principles also showed higher amounts of anthocyanins in 2005. A protocol to measure anthocyanins by pH-differential UV-Vis spectrophotometry was adapted to measure the hibiscus anthocyanins from a water extract. The spectrophotometric method for quantitation of total anthocyanins showed a close correlation (r(2)= 0.82) when compared with the HPLC method, suggesting the use of the colorimetric method in quality control programs as an affordable alternative method to assess anthocyanin content in hibiscus. New and raised standards for the cleanliness and active principle content in hibiscus are also proposed. This study demonstrated that the implementation of a quality control program and the application of agricultural good practices in the production and processing of hibiscus calyces can lead to higher quality natural plant products.

Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

NASA Astrophysics Data System (ADS)

Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

Identifying Quantitative Trait Loci (QTLs) and Developing Diagnostic Markers Linked to Orange Rust Resistance in Sugarcane (Saccharum spp.).

PubMed

Yang, Xiping; Islam, Md S; Sood, Sushma; Maya, Stephanie; Hanson, Erik A; Comstock, Jack; Wang, Jianping

2018-01-01

Sugarcane ( Saccharum spp.) is an important economic crop, contributing up to 80% of table sugar used in the world and has become a promising feedstock for biofuel production. Sugarcane production has been threatened by many diseases, and fungicide applications for disease control have been opted out for sustainable agriculture. Orange rust is one of the major diseases impacting sugarcane production worldwide. Identifying quantitative trait loci (QTLs) and developing diagnostic markers are valuable for breeding programs to expedite release of superior sugarcane cultivars for disease control. In this study, an F 1 segregating population derived from a cross between two hybrid sugarcane clones, CP95-1039 and CP88-1762, was evaluated for orange rust resistance in replicated trails. Three QTLs controlling orange rust resistance in sugarcane (qORR109, qORR4 and qORR102) were identified for the first time ever, which can explain 58, 12 and 8% of the phenotypic variation, separately. We also characterized 1,574 sugarcane putative resistance ( R ) genes. These sugarcane putative R genes and simple sequence repeats in the QTL intervals were further used to develop diagnostic markers for marker-assisted selection of orange rust resistance. A PCR-based Resistance gene-derived maker, G1 was developed, which showed significant association with orange rust resistance. The putative QTLs and marker developed in this study can be effectively utilized in sugarcane breeding programs to facilitate the selection process, thus contributing to the sustainable agriculture for orange rust disease control.

Modelling aspects regarding the control in 13C isotope separation column

NASA Astrophysics Data System (ADS)

Boca, M. L.

2016-08-01

Carbon represents the fourth most abundant chemical element in the world, having two stable and one radioactive isotope. The 13Carbon isotopes, with a natural abundance of 1.1%, plays an important role in numerous applications, such as the study of human metabolism changes, molecular structure studies, non-invasive respiratory tests, Alzheimer tests, air pollution and global warming effects on plants [9] A manufacturing control system manages the internal logistics in a production system and determines the routings of product instances, the assignment of workers and components, the starting of the processes on not-yet-finished product instances. Manufacturing control does not control the manufacturing processes themselves, but has to cope with the consequences of the processing results (e.g. the routing of products to a repair station). In this research it was fulfilled some UML (Unified Modelling Language) diagrams for modelling the C13 Isotope Separation column, implement in STARUML program. Being a critical process and needing a good control and supervising, the critical parameters in the column, temperature and pressure was control using some PLC (Programmable logic controller) and it was made some graphic analyze for this to observe some critical situation than can affect the separation process. The main parameters that need to be control are: -The liquid nitrogen (N2) level in the condenser. -The electrical power supplied to the boiler. -The vacuum pressure.

Waterborne Commerce of the United States, Calendar Year 1980. Part 4. Waterways and Harbors, Pacific Coast, Alaska and Hawaii.

DTIC Science & Technology

1982-09-01

PROGRAM ELEMENT. PROJECT. TASK Waterborne Comerce Statistics Center AESWRCUI UUR P. 0. Box 61280 *New Orleans, La. 70161 WRSC-CC 11I. CONTROLLING ... controlled cargo end Special Category Items." The 1980 statistics on waterborne exports of domestic and foreign merchandise and non-Department of Defense...Government materials 4119 Empty containers Group 34-fabricated Metal Products, 9999* Department of Defense controlled cargo snd special category Except

Evaluating and operationalizing an environmental auditing program: a pilot study.

PubMed

Gordon, Laura; Bruce, Natalie; Suh, Kathryn N; Roth, Virginia

2014-07-01

Environmental auditing is an important tool to ensure consistent and effective cleaning. Our pilot study compared an alcohol-based fluorescent marking product and an adenosine-5'-triphosphate bioluminescence product for use in an environmental auditing program to determine which product was more practical and acceptable to users. Both products were tested on 15 preselected high touch objects in randomly selected patient rooms, following regular daily cleaning. A room was considered a "pass" if ≥80% of surfaces were adequately cleaned as defined by manufacturers' guidelines. A qualitative survey assessed user preference and operational considerations. Using fluorescent marking, 9 of 37 patient rooms evaluated (24%) were considered a "pass" after daily cleaning. Using adenosine-5'-triphosphate bioluminescence, 21 of 37 patient rooms passed (57%). There was great variability in results between different high touch objects. Eighty percent of users preferred the alcohol-based fluorescent marking product because it provided an effective visual aid to coach staff on proper cleaning techniques and allowed simple and consistent application. Environmental auditing using translucent, alcohol-based fluorescent marking best met the requirements of our organization. Our results reinforce the importance of involving a multidisciplinary team in evaluating and operationalizing an environmental auditing program. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Productive Lifecycle of Human Papillomaviruses that Depends Upon Squamous Epithelial Differentiation

PubMed Central

Kajitani, Naoko; Satsuka, Ayano; Kawate, Akifumi; Sakai, Hiroyuki

2012-01-01

Human papillomaviruses (HPVs) target the stratified epidermis, and can causes diseases ranging from benign condylomas to malignant tumors. Infections of HPVs in the genital tract are among the most common sexually transmitted diseases, and a major risk factor for cervical cancer. The virus targets epithelial cells in the basal layer of the epithelium, while progeny virions egress from terminally differentiated cells in the cornified layer, the surface layer of the epithelium. In infected basal cells, the virus maintains its genomic DNA at low-copy numbers, at which the viral productive lifecycle cannot proceed. Progression of the productive lifecycle requires differentiation of the host cell, indicating that there is tight crosstalk between viral replication and host differentiation programs. In this review, we discuss the regulation of the HPV lifecycle controlled by the differentiation program of the host cells. PMID:22536200

Centralized Control of Defense Acquisition Programs: A Comparative Review of the Framework from 1987 - 2003

DTIC Science & Technology

2003-09-29

for information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget...selected to be the Product Manager for the Joint Advanced Special Operations Radio System, at Fort Monmouth, New Jersey and successfully completed a...use,” or in defense terms-- operational effectiveness and suitability. Beyond the business aspects of program management , measurement of system

An Analysis of the Future Combat Systems (FCS) Spin Out 1 Low-Rate of Initial Production (LRIP) Contract

DTIC Science & Technology

2008-09-16

interests are strategic resource management, strategic control, and corporate financial reporting. Joseph G. San Miguel Professor Graduate School of...Missile Defense PEO – Program Executive Officer PM – Program Manager SAIC – Science Applications International Corporation SAP – Systems Applications...International Corporation (SAIC) team (DoD, 2002). In addition to providing important personnel, the LSI team would provide an important advantage in

Launch Vehicle Production and Operations Cost Metrics

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Neeley, James R.; Blackburn, Ruby F.

2014-01-01

Traditionally, launch vehicle cost has been evaluated based on $/Kg to orbit. This metric is calculated based on assumptions not typically met by a specific mission. These assumptions include the specified orbit whether Low Earth Orbit (LEO), Geostationary Earth Orbit (GEO), or both. The metric also assumes the payload utilizes the full lift mass of the launch vehicle, which is rarely true even with secondary payloads.1,2,3 Other approaches for cost metrics have been evaluated including unit cost of the launch vehicle and an approach to consider the full program production and operations costs.4 Unit cost considers the variable cost of the vehicle and the definition of variable costs are discussed. The full program production and operation costs include both the variable costs and the manufacturing base. This metric also distinguishes operations costs from production costs, including pre-flight operational testing. Operations costs also consider the costs of flight operations, including control center operation and maintenance. Each of these 3 cost metrics show different sensitivities to various aspects of launch vehicle cost drivers. The comparison of these metrics provides the strengths and weaknesses of each yielding an assessment useful for cost metric selection for launch vehicle programs.

Anthelmintic resistance in cattle nematodes in the US.

PubMed

Gasbarre, Louis C

2014-07-30

The first documented case of macrocyclic lactone resistance in gastrointestinal (GI) nematodes of cattle was seen in the US approximately 10 years ago. Since that time the increase incidence of anthelmintic resistance has continued at an alarming rate. Currently parasites of the genera Cooperia and/or Haemonchus resistant to generic or brand-name macrocyclic lactones have be demonstrated in more than half of all operations examined. Both of these parasite genera are capable of causing economic losses by decreasing food intake and subsequently animal productivity. Currently, there are no easy and quick means to detect anthelmintic resistant GI nematodes. Definitive identification requires killing of cattle. The most commonly used field detection method is the fecal egg count reduction test (FECRT). This method can be adapted for use as a screening agent for Veterinarians and producers to identify less than desired clearance of the parasites after anthelmintic treatment. Further studies can then define the reasons for persistence of the egg counts. The appearance of anthelmintic resistance is largely due to the development of very effective nematode control programs that have significantly improved the productivity of the US cattle industry, but at the same time has placed a high level of selective pressure on the parasite genome. The challenges ahead include the development of programs that control the anthelmintic resistant nematodes but at the same time result in more sustainable parasite control. The goal is to maintain high levels of productivity but to exert less selective pressures on the parasites. One of the most effective means to slow the development of drug resistance is through the simultaneous use of multiple classes of anthelmintics, each of which has a different mode of action. Reduction of the selective pressure on the parasites can be attained through a more targeted approach to drug treatments where the producer's needs are met by selective treatment of different classes of animals and not by blanket treatment at a location. The implementation of such programs will vary by the sector of the industry and the individual site. In general, the feedlot will be the easiest sector for developing of programs, while stocker/backgrounder operations will provide the most challenging problems. A major question that must be addressed is whether it is important that parasite control programs to be sustainable over time, or if the pharmaceutical industry develop new control agents at a rate sufficient to render sustainability unimportant. Copyright © 2014. Published by Elsevier B.V.

A flight research program to develop airborne systems for improved terminal area operations

NASA Technical Reports Server (NTRS)

Reeder, J. P.

1974-01-01

The research program considered is concerned with the solution of operational problems for the approximate time period from 1980 to 2000. The problems are related to safety, weather effects, congestion, energy conservation, noise, atmospheric pollution, and the loss in productivity caused by delays, diversions, and schedule stretchouts. The terminal configured vehicle (TCV) program is to develop advanced flight-control capability. The various aspects of the TCV program are discussed, giving attention to avionics equipment, the piloted simulator, terminal-area environment simulation, the Wallops research facility, flight procedures, displays and human factors, flight activities, and questions of vortex-wake reduction and tracking.

Use of a student support group to reduce student stress in a nurse anesthesia program.

PubMed

Kless, J R

1989-02-01

Stress in nurse anesthesia programs may be excessive at times, especially in new students. While some degree of stress is necessary to motivate learning, excessive or prolonged stress can interfere with the normal learning process, thereby prolonging a student's clinical and academic progress. In the extreme, excessive stress may even preclude a student's successful completion of the educational program. Active faculty intervention through a student support group is advocated as a method for controlling stress levels and facilitating student learning. The positive effects of such intervention also increase the overall productivity of a program and better prepare nurse anesthesia students for their future careers.

The implementation of a Hazard Analysis and Critical Control Point management system in a peanut butter ice cream plant.

PubMed

Hung, Yu-Ting; Liu, Chi-Te; Peng, I-Chen; Hsu, Chin; Yu, Roch-Chui; Cheng, Kuan-Chen

2015-09-01

To ensure the safety of the peanut butter ice cream manufacture, a Hazard Analysis and Critical Control Point (HACCP) plan has been designed and applied to the production process. Potential biological, chemical, and physical hazards in each manufacturing procedure were identified. Critical control points for the peanut butter ice cream were then determined as the pasteurization and freezing process. The establishment of a monitoring system, corrective actions, verification procedures, and documentation and record keeping were followed to complete the HACCP program. The results of this study indicate that implementing the HACCP system in food industries can effectively enhance food safety and quality while improving the production management. Copyright © 2015. Published by Elsevier B.V.

Mold Heating and Cooling Pump Package Operator Interface Controls Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Josh A. Salmond

2009-08-07

The modernization of the Mold Heating and Cooling Pump Package Operator Interface (MHC PP OI) consisted of upgrading the antiquated single board computer with a proprietary operating system to off-the-shelf hardware and off-the-shelf software with customizable software options. The pump package is the machine interface between a central heating and cooling system that pumps heat transfer fluid through an injection or compression mold base on a local plastic molding machine. The operator interface provides the intelligent means of controlling this pumping process. Strict temperature control of a mold allows the production of high quality parts with tight tolerances and lowmore » residual stresses. The products fabricated are used on multiple programs.« less

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT--BAGHOUSE FILTRATION PRODUCTS, DONALDSON COMPANY, INC., 6282 FILTRATION MEDIA

EPA Science Inventory

The Environmental Technology Verification (ETV) Program, established by the U.S. EPA, is designed to accelerate the developmentand commercialization of new or improved technologies through third-party verification and reporting of performance. The Air Pollution Control Technology...

Environmental Technology Verification Report -- Baghouse filtration products, GE Energy QG061 filtration media ( tested May 2007)

EPA Science Inventory

EPA has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The Air Pollution Control Technology Verification Center, a cente...

The Mixmasters: A Smart Marketing Mix Helps a Small College Dramatically Increase Student Enrollments.

ERIC Educational Resources Information Center

Paul, R. Dana; Stark, Ken

1983-01-01

Adrian College's steady increase and confidence in enrollment projections stem from a research-based, thoughtfully planned, carefully implemented, highly controlled marketing programs. Four major elements of a successful marketing mix are identified: product, price, place, promotion. (MLW)

40 CFR 90.121 - Certification procedure-recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the engine, steps taken to insure that it is representative of production engines, description of... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS... engine manufacturer must maintain the following adequately organized records: (1) Copies of all...

Gestion responsable del carbono en el suelo

USDA-ARS?s Scientific Manuscript database

The world's agronomists must broaden their perspective and shift conservation concepts and programs to get away from managing for only yield and erosion control and move to managing soil carbon (C) for crop production sustainability and maintaining environmental quality. This work reviews research o...

Human Resource Managers Rank Their Pressure Points.

ERIC Educational Resources Information Center

Herring, Jack

1983-01-01

A survey of 700 top-level human resource executives that elicited 309 responses revealed the highest priority ranking of 24 human resource issues to be: productivity improvement, controlling costs of employee benefits, compensation planning and administration, employee communications, upgrading management training development programs,…

Automotive Stirling Engine Development Program. RESD summary report

NASA Technical Reports Server (NTRS)

1984-01-01

The design of reference Stirling engine system as well as the engine auxiliaries and controls is described. Manufacturing costs in production quantity are also presented. Engine system performance predictions are discussed and vehicle integration is developed, along with projected fuel economy levels.

CELSS scenario analysis: Breakeven calculations

NASA Technical Reports Server (NTRS)

Mason, R. M.

1980-01-01

A model of the relative mass requirements of food production components in a controlled ecological life support system (CELSS) based on regenerative concepts is described. Included are a discussion of model scope, structure, and example calculations. Computer programs for cultivar and breakeven calculations are also included.

Quality control of antibiotics before the implementation of an STD program in Northern Myanmar.

PubMed

Prazuck, Thierry; Falconi, Isabelle; Morineau, Guy; Bricard-Pacaud, Véronique; Lecomte, Antoine; Ballereau, Francoise

2002-11-01

The ready availability of poor-quality drugs in developing countries leads to treatment failure and, consequently, excess mortality and morbidity. Moreover, the widespread availability of substandard drugs plays a key role in increasing the resistance to antimicrobial drugs.GOAL As a prerequisite to the establishment of a sexually transmitted disease (STD) control program, this study aimed to evaluate the quality of antibiotics recommended for treatment of STDs that were locally available in the capital of a province of Northern Myanmar. In addition to the hospital pharmacy, we selected at random 5 of the 41 drug sellers and 5 of the 40 general practitioners who sell antibiotics in the city of Myitkyina. Twenty-one marketing products corresponding to nine different antibiotics used for STD treatment were purchased (benzathine benzylpenicillin, benzylpenicillin, ceftriaxone, chlortetracycline, ciprofloxacin, clotrimazole, co-trimoxazole, doxycycline, and erythromycin). Drugs were sent to France, where they were analyzed according to the WHO guidelines. Drugs were considered to be standard if their dosage remained in the 10% range of the expected value. Among the 21 different specialty products, only three displayed the official "registered" label. Three drugs were expired and the expiration date was not available for six others. One product did not contain the active drug declared (chlortetracycline; Lombisin, Unicorn, China) and did not show any in vitro activity against bacteria. Seven of 21 products (33%) did not contain the stated dosage (1, more than stated dosage; 6, less than stated dosage). The highest deficit observed was 48% in two products (co-trimoxazole, Yong Fong, Myanmar; benzylpenicillin, China [city and manufacturer unknown]). The dosage was not available for five drugs. As a result, only 8 of 21 products (38%) did not contain the stated dosage of active drug. These findings suggest that public health policies based on national treatment guidelines should rigorously include the monitoring of quality control of available antimicrobial products. In the absence of such measures, specific treatment strategies are likely to fail and to generate drug resistance.

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, C.; Crook, J.

1998-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for advanced engine control systems that will result in lower software maintenance (operations) costs. It effectively accommodates software requirement changes that occur due to hardware technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives, benefits, and status of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishments are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software architecture, reuse software, and reduced software reverification time related to software changes. MRECS was recently modified to support a Space Shuttle Main Engine (SSME) hot-fire test. Cold Flow and Flight Readiness Testing were completed before the test was cancelled. Currently, the program is focused on supporting NASA MSFC in accomplishing development testing of the Fastrac Engine, part of NASA's Low Cost Technologies (LCT) Program. MRECS will be used for all engine development testing.

Implementing Impact Evaluations of Malaria Control Interventions: Process, Lessons Learned, and Recommendations

PubMed Central

Hershey, Christine L.; Bhattarai, Achuyt; Florey, Lia S.; McElroy, Peter D.; Nielsen, Carrie F.; Yé, Yazoume; Eckert, Erin; Franca-Koh, Ana Cláudia; Shargie, Estifanos; Komatsu, Ryuichi; Smithson, Paul; Thwing, Julie; Mihigo, Jules; Herrera, Samantha; Taylor, Cameron; Shah, Jui; Mouzin, Eric; Yoon, Steven S.; Salgado, S. René

2017-01-01

Abstract. As funding for malaria control increased considerably over the past 10 years resulting in the expanded coverage of malaria control interventions, so did the need to measure the impact of these investments on malaria morbidity and mortality. Members of the Roll Back Malaria (RBM) Partnership undertook impact evaluations of malaria control programs at a time when there was little guidance in terms of the process for conducting an impact evaluation of a national-level malaria control program. The President’s Malaria Initiative (PMI), as a member of the RBM Partnership, has provided financial and technical support for impact evaluations in 13 countries to date. On the basis of these experiences, PMI and its partners have developed a streamlined process for conducting the evaluations with a set of lessons learned and recommendations. Chief among these are: to ensure country ownership and involvement in the evaluations; to engage stakeholders throughout the process; to coordinate evaluations among interested partners to avoid duplication of efforts; to tailor the evaluation to the particular country context; to develop a standard methodology for the evaluations and a streamlined process for completion within a reasonable time; and to develop tailored dissemination products on the evaluation for a broad range of stakeholders. These key lessons learned and resulting recommendations will guide future impact evaluations of malaria control programs and other health programs. PMID:28990921

Integration of microbial biopesticides in greenhouse floriculture: The Canadian experience.

PubMed

Brownbridge, Michael; Buitenhuis, Rose

2017-11-28

Historically, greenhouse floriculture has relied on synthetic insecticides to meet its pest control needs. But, growers are increasingly faced with the loss or failure of synthetic chemical pesticides, declining access to new chemistries, stricter environmental/health and safety regulations, and the need to produce plants in a manner that meets the 'sustainability' demands of a consumer driven market. In Canada, reports of thrips resistance to spinosad (Success™) within 6-12 months of its registration prompted a radical change in pest management philosophy and approach. Faced with a lack of registered chemical alternatives, growers turned to biological control out of necessity. Biological control now forms the foundation for pest management programs in Canadian floriculture greenhouses. Success in a biocontrol program is rarely achieved through the use of a single agent, though. Rather, it is realized through the concurrent use of biological, cultural and other strategies within an integrated plant production system. Microbial insecticides can play a critical supporting role in biologically-based integrated pest management (IPM) programs. They have unique modes of action and are active against a range of challenging pests. As commercial microbial insecticides have come to market, research to generate efficacy data has assisted their registration in Canada, and the development and adaptation of integrated programs has promoted uptake by floriculture growers. This review documents some of the work done to integrate microbial insecticides into chrysanthemum and poinsettia production systems, outlines current use practices, and identifies opportunities to improve efficacy in Canadian floriculture crops. Copyright © 2017 Elsevier Inc. All rights reserved.

A Multi-step Transcriptional and Chromatin State Cascade Underlies Motor Neuron Programming from Embryonic Stem Cells.

PubMed

Velasco, Silvia; Ibrahim, Mahmoud M; Kakumanu, Akshay; Garipler, Görkem; Aydin, Begüm; Al-Sayegh, Mohamed Ahmed; Hirsekorn, Antje; Abdul-Rahman, Farah; Satija, Rahul; Ohler, Uwe; Mahony, Shaun; Mazzoni, Esteban O

2017-02-02

Direct cell programming via overexpression of transcription factors (TFs) aims to control cell fate with the degree of precision needed for clinical applications. However, the regulatory steps involved in successful terminal cell fate programming remain obscure. We have investigated the underlying mechanisms by looking at gene expression, chromatin states, and TF binding during the uniquely efficient Ngn2, Isl1, and Lhx3 motor neuron programming pathway. Our analysis reveals a highly dynamic process in which Ngn2 and the Isl1/Lhx3 pair initially engage distinct regulatory regions. Subsequently, Isl1/Lhx3 binding shifts from one set of targets to another, controlling regulatory region activity and gene expression as cell differentiation progresses. Binding of Isl1/Lhx3 to later motor neuron enhancers depends on the Ebf and Onecut TFs, which are induced by Ngn2 during the programming process. Thus, motor neuron programming is the product of two initially independent transcriptional modules that converge with a feedforward transcriptional logic. Copyright © 2017 Elsevier Inc. All rights reserved.

A systematic review of financial and economic assessments of bovine viral diarrhea virus (BVDV) prevention and mitigation activities worldwide.

PubMed

Pinior, Beate; Firth, Clair L; Richter, Veronika; Lebl, Karin; Trauffler, Martine; Dzieciol, Monika; Hutter, Sabine E; Burgstaller, Johann; Obritzhauser, Walter; Winter, Petra; Käsbohrer, Annemarie

2017-02-01

Infection with bovine viral diarrhea virus (BVDV) results in major economic losses either directly through decreased productive performance in cattle herds or indirectly, such as through expenses for control programs. The aim of this systematic review was to review financial and/or economic assessment studies of prevention and/or mitigation activities of BVDV at national, regional and farm level worldwide. Once all predefined criteria had been met, 35 articles were included for this systematic review. Studies were analyzed with particular focus on the type of financially and/or economically-assessed prevention and/or mitigation activities. Due to the wide range of possible prevention and/or mitigation activities, these activities were grouped into five categories: i) control and/or eradication programs, ii) monitoring or surveillance, iii) prevention, iv) vaccination and v) individual culling, control and testing strategies. Additionally, the studies were analyzed according to economically-related variables such as efficiency, costs or benefits of prevention and/or mitigation activities, the applied financial and/or economic and statistical methods, the payers of prevention and/or mitigation activities, the assessed production systems, and the countries for which such evaluations are available. Financial and/or economic assessments performed in Europe were dominated by those from the United Kingdom, which assessed mostly vaccination strategies, and Norway which primarily carried out assessments in the area of control and eradication programs; whereas among non-European countries the United States carried out the majority of financial and/or economic assessments in the area of individual culling, control and testing. More than half of all studies provided an efficiency calculation of prevention and/or mitigation activities and demonstrated whether the inherent costs of implemented activities were or were not justified. The dairy sector was three times more likely to be assessed by the countries than beef production systems. In addition, the dairy sector was approximately eight times more likely to be assessed economically with respect to prevention and/or mitigation activities than calf and youngstock production systems. Furthermore, the private sector was identified as the primary payer of prevention and/or mitigation activities. This systematic review demonstrated a lack of studies relating to efficiency calculations, in particular at national and regional level, and the specific production systems. Thus, we confirmed the need for more well-designed studies in animal health economics in order to demonstrate that the implementation and inherent costs of BVDV prevention and/or mitigation activities are justified. Copyright © 2016 The Author(s). Published by Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kegel, T.M.

Calibration laboratories are faced with the need to become accredited or registered to one or more quality standards. One requirement common to all of these standards is the need to have in place a measurement assurance program. What is a measurement assurance program? Brian Belanger, in Measurement Assurance Programs: Part 1, describes it as a {open_quotes}quality assurance program for a measurement process that quantifies the total uncertainty of the measurements (both random and systematic components of error) with respect to national or designated standards and demonstrates that the total uncertainty is sufficiently small to meet the user`s requirements.{close_quotes} Rolf Schumachermore » is more specific in Measurement Assurance in Your Own Laboratory. He states, {open_quotes}Measurement assurance is the application of broad quality control principles to measurements of calibrations.{close_quotes} Here, the focus is on one important part of any measurement assurance program: implementation of statistical process control (SPC). Paraphrasing Juran`s Quality Control Handbook, a process is in statistical control if the only observed variations are those that can be attributed to random causes. Conversely, a process that exhibits variations due to assignable causes is not in a state of statistical control. Finally, Carrol Croarkin states, {open_quotes}In the measurement assurance context the measurement algorithm including instrumentation, reference standards and operator interactions is the process that is to be controlled, and its direct product is the measurement per se. The measurements are assumed to be valid if the measurement algorithm is operating in a state of control.{close_quotes} Implicit in this statement is the important fact that an out-of-control process cannot produce valid measurements. 7 figs.« less

Single Crystal Diffractometry

NASA Astrophysics Data System (ADS)

Arndt, U. W.; Willis, B. T. M.

2009-06-01

Preface; Acknowledgements; Part I. Introduction; Part II. Diffraction Geometry; Part III. The Design of Diffractometers; Part IV. Detectors; Part V. Electronic Circuits; Part VI. The Production of the Primary Beam (X-rays); Part VII. The Production of the Primary Beam (Neutrons); Part VIII. The Background; Part IX. Systematic Errors in Measuring Relative Integrated Intensities; Part X. Procedure for Measuring Integrated Intensities; Part XI. Derivation and Accuracy of Structure Factors; Part XII. Computer Programs and On-line Control; Appendix; References; Index.

The design of a community-based health education intervention for the control of Aedes aegypti.

PubMed

Lloyd, L S; Winch, P; Ortega-Canto, J; Kendall, C

1994-04-01

This report describes the process used to develop locally appropriate educational materials and to implement the education component of a community-based Aedes aegypti control program in Merida, Yucatan, Mexico. The process is broken into five stages: formative research, developing recommendations for behavior change, development of educational messages, development and production of educational materials, and distribution of the materials. Appropriate terminology and taxonomies for dengue were obtained from open in-depth interviews; baseline data from a knowledge, beliefs, and practices questionnaire served to confirm this information. A larval survey of house lots was carried out to identify the Ae. aegypti larval production sites found on individual house lots. This enabled the program to target the most important larval habitats. Community groups were organized to work on the development of messages and production of the educational materials to be used. The education intervention was successful in stimulating changes in both knowledge and behavior, which were measured in the evaluations of the intervention. To be successful, community-based strategies must be flexible and adapted to the local setting because of ecologic, cultural, and social differences between localities.

Oil turmoil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-07-01

A review of US oil production, refining, and retailing reveals the severity of the energy problem and illustrates the confusion over what can be accomplished by decontrolling oil prices. Conflicting statements from members of Congress, the President, and the oil industry have further confused the public. The shortages can be traced to a decline in domestic production incentives and foreign production, a slowdown in refinery expansion because of environmental constraints, competition between home heating oil and gasoline for priority, the failure of states to enforce speed limits, and a national preoccupation with oil profits. Senator Kennedy, for example, advocates continuedmore » price controls with a world-wide drilling program funded by the World Bank, while decontrol advocates feel price controls will only artifically restrain US production. The economic effects of decontrol on inflation are unclear, but conservation efforts, the development of alternative energy sources, and oil development from shale and tar sands are predicted to increase as political rhetoric declines.« less

40 CFR 1033.305 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROL OF EMISSIONS FROM LOCOMOTIVES Manufacturer and Remanufacturer Production Line Testing and Audit... locomotives. (b) Remanufacturers are required to conduct audits according to the requirements of § 1033.335 to... request, you must show us that the alternate program gives equal assurance that your engines meet the...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS--DONALDSON COMPANY, INC., TETRATEC #6255 FILTRATION MEDIA

EPA Science Inventory

The Environmental Technology Verification (ETV) Program, established by the U.S. EPA, is designed to accelerate the development and commercialization of new or improved technologies through third-party verification and reporting of performance. The Air Pollution Control Technolog...

Recycling of salt-contaminated stormwater runoff for brine production at Virginia Department of Transportation road-salt storage facilities.

DOT National Transportation Integrated Search

2008-01-01

A large part of the Virginia Department of Transportation's (VDOT's) maintenance effort comprises the implementation of its snow removal and ice control program. Earlier research confirmed that VDOT captures significant volumes of salt-laden stormwat...

The National Shipbuilding Research Program, Analytical Quality Circles

DTIC Science & Technology

1986-09-01

standard tools for quality control, in English, see “Guide to Quality Control” by Dr. Kaoru Ishikawa , Asian Productivity Organization, Aoyama Dai-ichi...factors affect work evaluation is shown schemati- cally by Characteristic-Factor Diagrams (also called Fishbone or Ishikawa Diagrams), see Figure 2-5

78 FR 21116 - Superior Supplier Incentive Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... (Quality of Product). Schedule. Cost Control. Management Responsiveness. Management of Key Personnel... unit can only be rated in either the goods or services category. In the event a contractor is within... will provide contractors with the greatest motivation to achieve SSS? 3. What contract terms and...

EPA's Technology Transfer: Now Geared to Industry

ERIC Educational Resources Information Center

Environmental Science and Technology, 1973

1973-01-01

Through capsule reports, seminars, and design manuals, Environmental Protection Agency has activated its industrial technology transfer program for marketing the products of federal research, development, and demonstration activities. Its purpose is to disseminate information to industry on available technology for control and treatment of air,…

40 CFR 205.173-3 - Warning statement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Warning statement. 205.173-3 Section... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.173-3 Warning... of that category the manufacturer distributes into commerce: Warning: This product should be checked...

40 CFR 205.173-3 - Warning statement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Warning statement. 205.173-3 Section... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.173-3 Warning... of that category the manufacturer distributes into commerce: Warning: This product should be checked...

40 CFR 205.173-3 - Warning statement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Warning statement. 205.173-3 Section... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.173-3 Warning... of that category the manufacturer distributes into commerce: Warning: This product should be checked...

40 CFR 205.173-3 - Warning statement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Warning statement. 205.173-3 Section... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.173-3 Warning... of that category the manufacturer distributes into commerce: Warning: This product should be checked...

40 CFR 205.173-3 - Warning statement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Warning statement. 205.173-3 Section... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.173-3 Warning... of that category the manufacturer distributes into commerce: Warning: This product should be checked...

MicroRNA expression and implications for infectious diseases in livestock

USDA-ARS?s Scientific Manuscript database

Animal diseases are a significant source of lost revenue in livestock production systems. Reduction and control of diseases has traditionally been done under two management programs: vaccination and use of antibiotics. However, reduced efficacy of vaccines and restrictions in the use of antibiotics ...

A natural variant of NAL1, selected in high-yield rice breeding programs, pleiotropically increases photosynthesis rate.

PubMed

Takai, Toshiyuki; Adachi, Shunsuke; Taguchi-Shiobara, Fumio; Sanoh-Arai, Yumiko; Iwasawa, Norio; Yoshinaga, Satoshi; Hirose, Sakiko; Taniguchi, Yojiro; Yamanouchi, Utako; Wu, Jianzhong; Matsumoto, Takashi; Sugimoto, Kazuhiko; Kondo, Katsuhiko; Ikka, Takashi; Ando, Tsuyu; Kono, Izumi; Ito, Sachie; Shomura, Ayahiko; Ookawa, Taiichiro; Hirasawa, Tadashi; Yano, Masahiro; Kondo, Motohiko; Yamamoto, Toshio

2013-01-01

Improvement of leaf photosynthesis is an important strategy for greater crop productivity. Here we show that the quantitative trait locus GPS (GREEN FOR PHOTOSYNTHESIS) in rice (Oryza sativa L.) controls photosynthesis rate by regulating carboxylation efficiency. Map-based cloning revealed that GPS is identical to NAL1 (NARROW LEAF1), a gene previously reported to control lateral leaf growth. The high-photosynthesis allele of GPS was found to be a partial loss-of-function allele of NAL1. This allele increased mesophyll cell number between vascular bundles, which led to thickened leaves, and it pleiotropically enhanced photosynthesis rate without the detrimental side effects observed in previously identified nal1 mutants, such as dwarf plant stature. Furthermore, pedigree analysis suggested that rice breeders have repeatedly selected the high-photosynthesis allele in high-yield breeding programs. The identification and utilization of NAL1 (GPS) can enhance future high-yield breeding and provides a new strategy for increasing rice productivity.

A natural variant of NAL1, selected in high-yield rice breeding programs, pleiotropically increases photosynthesis rate

PubMed Central

Takai, Toshiyuki; Adachi, Shunsuke; Taguchi-Shiobara, Fumio; Sanoh-Arai, Yumiko; Iwasawa, Norio; Yoshinaga, Satoshi; Hirose, Sakiko; Taniguchi, Yojiro; Yamanouchi, Utako; Wu, Jianzhong; Matsumoto, Takashi; Sugimoto, Kazuhiko; Kondo, Katsuhiko; Ikka, Takashi; Ando, Tsuyu; Kono, Izumi; Ito, Sachie; Shomura, Ayahiko; Ookawa, Taiichiro; Hirasawa, Tadashi; Yano, Masahiro; Kondo, Motohiko; Yamamoto, Toshio

2013-01-01

Improvement of leaf photosynthesis is an important strategy for greater crop productivity. Here we show that the quantitative trait locus GPS (GREEN FOR PHOTOSYNTHESIS) in rice (Oryza sativa L.) controls photosynthesis rate by regulating carboxylation efficiency. Map-based cloning revealed that GPS is identical to NAL1 (NARROW LEAF1), a gene previously reported to control lateral leaf growth. The high-photosynthesis allele of GPS was found to be a partial loss-of-function allele of NAL1. This allele increased mesophyll cell number between vascular bundles, which led to thickened leaves, and it pleiotropically enhanced photosynthesis rate without the detrimental side effects observed in previously identified nal1 mutants, such as dwarf plant stature. Furthermore, pedigree analysis suggested that rice breeders have repeatedly selected the high-photosynthesis allele in high-yield breeding programs. The identification and utilization of NAL1 (GPS) can enhance future high-yield breeding and provides a new strategy for increasing rice productivity. PMID:23985993

Meeting the challenge of the 80's cost reduction measures at the Iron Ore Company of Canada's Carol Project 1980-85

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tinto, I.A.

1985-01-01

The mining facilities, crushing plant, and concentrator of the Iron Ore Company of Canada were in operation by 1962. Today, the Carol Project has the capacity to produce 20 million tonnes of concentrate from which 10.5 million tonnes of pellets can be produced. The period 1980-85 spans a period of energy crisis, world-wide recession, and a consequent re-structuring of the North American steel industry as it struggles to survive in an arena of excess world stell making capacity, government subsidized industries, and the increasing competition from overseas and from developing countries. This paper reviews cost reduction programs implemented by themore » Iron Ore Company of Canada at its 'Carol Project' and emphasizes improvements made in labour productivity, energy conservation, mining strategy, quality control, and reduced cost through technical innovations over this difficult period. The cost reduction program is reviewed under the headings of labor productivity, energy conservation, mining strategy, technical innovations and quality control.« less

Dermal safety assessment of Arm & Hammer laundry products formulated for sensitive skin.

PubMed

Frederick, Douglas M; Vorwerk, Linda; Gupta, Archana; Ghassemi, Annahita

2017-09-01

The prevalence of sensitive skin among the general population in industrialized countries is reported to be over 50%. Sensitive skin subjects often report significant reactions to contact with cosmetics, soaps and other consumer products. This paper describes the overall skin compatibility and mildness program for a newly developed, lightly fragranced, colorant free laundry product (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent), specially formulated for individuals with sensitive skin. The skin mildness of the product was compared to Arm & Hammer™ Free & Clear liquid laundry detergent with no fragrance or colorant, and an established history of safe use by sensitive skin consumers. The test material was a liquid laundry product with a light scent formulated for sensitive skin consumers (Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent). The product was compared to commercially marketed products for sensitive skin with a history of skin safety in the marketplace, including: a very similar product formulation (Arm & Hammer™ Free & Clear with no fragrance), and several selected competitors' products. Studies were conducted among individuals with self-assessed sensitive skin (based on a questionnaire) using standard protocols for the Human Repeat Insult Patch Test (HRIPT), 10-Day Cumulative Irritation, the Wrist Band Wear test, and the Safety In-Use testing. Responses in all protocols were evaluated by visual scoring of potential dermatologic reactions, and recording any sensory effects at the time of the examination. In addition, sensory effects collected from panelists' daily diaries were also evaluated. The HRIPT confirmed that neither the fragrance alone, nor the product formulation with fragrance, induced contact sensitization in sensitive skin subjects. The 10-Day cumulative irritation study conducted using sensitive skin subjects showed highly favorable skin compatibility, and the test product was comparable to the control product (Arm & Hammer Free & Clear) and other nonirritant controls. In the Wrist Band Wear test, exposure to laundered fabrics under exaggerated conditions gave similar results for the test and control products, with no objective signs of skin irritation, and no self-reported persistent adverse sensory effects. Very mild, transient and isolated sensory effects were noted in daily diaries by a small proportion of subjects, and were similar for the test and control products. The Safety In-Use tests evaluated 4-week exposure to product and laundered fabrics under realistic use conditions. There were no clinically objective signs of skin irritation, and reports of transitory, mild sensory effects were minimal and similar for the test and controls. A comprehensive skin safety program on a lightly scented sensitive skin laundry formulation (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent) conducted among panels of self-assessed sensitive skin subjects demonstrated that the presence of a light fragrance did not adversely impact skin compatibility in any of the testing protocols when the product was compared to a similar product with no fragrance. The lightly fragranced product demonstrated overall skin compatibility and mildness when tested in a self-assessed sensitive skin population, and compared favorably to currently marketed sensitive skin products.

Use of a Business Approach to Improve Disease Surveillance Data Management Systems and Information Technology Process in Florida's Bureau of STD Prevention and Control.

PubMed

Shiver, Stacy A; Schmitt, Karla; Cooksey, Adrian

2009-01-01

The business of sexually transmitted disease (STD) prevention and control demands technology that is capable of supporting a wide array of program activities-from the processing of laboratory test results to the complex and confidential process involved in contact investigation. The need for a tool that enables public health officials to successfully manage the complex operations encountered in an STD prevention and control program, and the need to operate in an increasingly poor resource environment, led the Florida Bureau of STD to develop the Patient Reporting Investigation Surveillance Manager. Its unique approach, technical architecture, and sociotechnical philosophy have made this business application successful in real-time monitoring of disease burden for local communities, identification of emerging outbreaks, monitoring and assurance of appropriate treatments, improving access to laboratory data, and improving the quality of data for epidemiologic analysis. Additionally, the effort attempted to create and release a product that promoted the Centers for Disease Control and Prevention's ideas for integration of programs and processes.

A profile of unintentional poisoning caused by household cleaning products, disinfectants and pesticides.

PubMed

Presgrave, Rosaura de Farias; Camacho, Luiz Antônio Bastos; Villas Boas, Maria Helena Simões

2008-12-01

Unintentional poisoning occurred mainly among children. The leading cause of such poisoning in Brazil, among consumer products was household cleaning products. For this study 2810 calls made to two poison control centers in the State of Rio de Janeiro between January 2000 and December 2002 were analyzed. Children under five were the most vulnerable group. More boys under 10 suffered accidental poisoning than girls, although above this age, the distribution was inverted. The calls received by poison control centers were mainly from health services within the first two hours following poisoning. The most frequent exposure routes were ingestion (90.4%), followed by inhalation (4.3%), skin and eye contact (2.4% and 2% respectively). The products involved were bleach, petroleum derivates, rodenticides and pesticides. The main causes were products within the children's reach, storage in soft drink bottles, food mixed with rodenticides, incorrect product use, and kitchen utensils used for measured cleaning products. The most common outcome was that the patient was cured, although a lot of cases were lost to follow-up. Education programs are necessary in order to avoid these poisonings.

Autocrine IL-10 functions as a rheostat for M1 macrophage glycolytic commitment by tuning nitric oxide production.

PubMed

Baseler, Walter A; Davies, Luke C; Quigley, Laura; Ridnour, Lisa A; Weiss, Jonathan M; Hussain, S Perwez; Wink, David A; McVicar, Daniel W

2016-12-01

Inflammatory maturation of M1 macrophages by proinflammatory stimuli such as toll like receptor ligands results in profound metabolic reprogramming resulting in commitment to aerobic glycolysis as evidenced by repression of mitochondrial oxidative phosphorylation (OXPHOS) and enhanced glucose utilization. In contrast, "alternatively activated" macrophages adopt a metabolic program dominated by fatty acid-fueled OXPHOS. Despite the known importance of these developmental stages on the qualitative aspects of an inflammatory response, relatively little is know regarding the regulation of these metabolic adjustments. Here we provide evidence that the immunosuppressive cytokine IL-10 defines a metabolic regulatory loop. Our data show for the first time that lipopolysaccharide (LPS)-induced glycolytic flux controls IL-10-production via regulation of mammalian target of rapamycin (mTOR) and that autocrine IL-10 in turn regulates macrophage nitric oxide (NO) production. Genetic and pharmacological manipulation of IL-10 and nitric oxide (NO) establish that metabolically regulated autocrine IL-10 controls glycolytic commitment by limiting NO-mediated suppression of OXPHOS. Together these data support a model where autocine IL-10 production is controlled by glycolytic flux in turn regulating glycolytic commitment by preserving OXPHOS via suppression of NO. We propose that this IL-10-driven metabolic rheostat maintains metabolic equilibrium during M1 macrophage differentiation and that perturbation of this regulatory loop, either directly by exogenous cellular sources of IL-10 or indirectly via limitations in glucose availability, skews the cellular metabolic program altering the balance between inflammatory and immunosuppressive phenotypes. Copyright © 2016. Published by Elsevier B.V.

Programmed death 1-mediated T cell exhaustion during visceral leishmaniasis impairs phagocyte function.

PubMed

Esch, Kevin J; Juelsgaard, Rachel; Martinez, Pedro A; Jones, Douglas E; Petersen, Christine A

2013-12-01

Control of Leishmania infantum infection is dependent upon Th1 CD4(+) T cells to promote macrophage intracellular clearance of parasites. Deficient CD4(+) T cell effector responses during clinical visceral leishmaniasis (VL) are associated with elevated production of IL-10. In the primary domestic reservoir of VL, dogs, we define occurrence of both CD4(+) and CD8(+) T cell exhaustion as a significant stepwise loss of Ag-specific proliferation and IFN-γ production, corresponding to increasing VL symptoms. Exhaustion was associated with a 4-fold increase in the population of T cells with surface expression of programmed death 1 (PD-1) between control and symptomatic populations. Importantly, exhausted populations of CD8(+) T cells and to a lesser extent CD4(+) T cells were present prior to onset of clinical VL. VL-exhausted T cells did not undergo significant apoptosis ex vivo after Ag stimulation. Ab block of PD-1 ligand, B7.H1, promoted return of CD4(+) and CD8(+) T cell function and dramatically increased reactive oxygen species production in cocultured monocyte-derived phagocytes. As a result, these phagocytes had decreased parasite load. To our knowledge, we demonstrate for the first time that pan-T cell, PD-1-mediated, exhaustion during VL influenced macrophage-reactive oxygen intermediate production. Blockade of the PD-1 pathway improved the ability of phagocytes isolated from dogs presenting with clinical VL to clear intracellular parasites. T cell exhaustion during symptomatic canine leishmaniasis has implications for the response to vaccination and therapeutic strategies for control of Leishmania infantum in this important reservoir species.

Global Forest Products Model software design and implementation (GFPM version 2014 with BPMP)

Treesearch

Shushuai Zhu; James Turner; Joseph   Buongiorno

2014-01-01

An overview of the GFPM software structure is given in Section 1.1 in terms of the overall processing flows and the main components of the GFPM. Section 1.2 describes the role of batch files in controlling the execution of the GFPM programs, and details of the sequence of program execution corresponding to each of the “Main Menu” options of the GFPM. Next, each...

Anlysis capabilities for plutonium-238 programs

NASA Astrophysics Data System (ADS)

Wong, A. S.; Rinehart, G. H.; Reimus, M. H.; Pansoy-Hjelvik, M. E.; Moniz, P. F.; Brock, J. C.; Ferrara, S. E.; Ramsey, S. S.

2000-07-01

In this presentation, an overview of analysis capabilities that support 238Pu programs will be discussed. These capabilities include neutron emission rate and calorimetric measurements, metallography/ceramography, ultrasonic examination, particle size determination, and chemical analyses. The data obtained from these measurements provide baseline parameters for fuel clad impact testing, fuel processing, product certifications, and waste disposal. Also several in-line analyses capabilities will be utilized for process control in the full-scale 238Pu Aqueous Scrap Recovery line in FY01.

Minifactory: a precision assembly system adaptable to the product life cycle

NASA Astrophysics Data System (ADS)

Muir, Patrick F.; Rizzi, Alfred A.; Gowdy, Jay W.

1997-12-01

Automated product assembly systems are traditionally designed with the intent that they will be operated with few significant changes for as long as the product is being manufactured. This approach to factory design and programming has may undesirable qualities which have motivated the development of more 'flexible' systems. In an effort to improve agility, different types of flexibility have been integrated into factory designs. Specifically, automated assembly systems have been endowed with the ability to assemble differing products by means of computer-controlled robots, and to accommodate variations in parts locations and dimensions by means of sensing. The product life cycle (PLC) is a standard four-stage model of the performance of a product from the time that it is first introduced in the marketplace until the time that it is discontinued. Manufacturers can improve their return on investment by adapting the production process to the PLC. We are developing two concepts to enable manufacturers to more readily achieve this goal: the agile assembly architecture (AAA), an abstract framework for distributed modular automation; and minifactory, our physical instantation of this architecture for the assembly of precision electro-mechanical devices. By examining the requirements which each PLC stage places upon the production system, we identify characteristics of factory design and programming which are appropriate for that stage. As the product transitions from one stage to the next, the factory design and programing should also transition from one embodiment to the next in order to achieve the best return on investment. Modularity of the factory components, highly flexible product transport mechanisms, and a high level of distributed intelligence are key characteristics of minifactory that enable this adaptation.

Federal Research and Development Funding: FY2017

DTIC Science & Technology

2016-06-24

facilities and equipment; does not include physical assets for R&D such as R&D equipment and facilities or routine product testing, quality control...multiagency R&D initiative to advance understanding and control of matter at the nanoscale, where the physical , chemical, and biological properties of...nuclear programs that dated back to the Manhattan Project. Today, DOE conducts basic scientific research in areas ranging from nuclear physics to the

Honeywell optical investigations on FLASH program

NASA Astrophysics Data System (ADS)

O'Rourke, Ken; Peterson, Eric; Yount, Larry

1995-05-01

The increasing performance and reduction of life cycle cost requirements placed on commercial and military transport aircraft are resulting in more complex, highly integrated aircraft control and management systems. The use of fiber optic data transmission media can make significant contributions in achieving these performance and cost goals. The Honeywell portion of Task 2A on the Fly-by-Light Advanced System Hardware (FLASH) program is evaluating a Primary Flight Control System (PFCS) using pilot and copilot inputs from Active Hand Controllers (AHC) which are optically linked to the primary flight Control Computers (PFCC). Customer involvement is an important element of the Task 2A activity. Establishing customer requirements and perspectives on productization of systems developed under FLASH are key to future product success. The Honeywell elements of the PFCS demonstrator provide a command path that is optically interfaced from crew inputs to commands of distributed, smart actuation subsystems commands. Optical communication architectures are implemented using several protocols including the new AS-1773A 20 Mbps data bus standard. The interconnecting fiber optic cable plant is provided by our Task 1A teammate McDonnell Douglas Aerospace (West). Fiber optic cable plant fabrication uses processed, tools and materials reflecting necessary advances in manufacturing required to make fly-by-light avionics systems marketable.

Spacecraft applications of advanced global positioning system technology

NASA Technical Reports Server (NTRS)

1988-01-01

This is the final report on the Texas Instruments Incorporated (TI) simulations study of Spacecraft Application of Advanced Global Positioning System (GPS) Technology. This work was conducted for the NASA Johnson Space Center (JSC) under contract NAS9-17781. GPS, in addition to its baselined capability as a highly accurate spacecraft navigation system, can provide traffic control, attitude control, structural control, and uniform time base. In Phase 1 of this program, another contractor investigated the potential of GPS in these four areas and compared GPS to other techniques. This contract was for the Phase 2 effort, to study the performance of GPS for these spacecraft applications through computer simulations. TI had previously developed simulation programs for GPS differential navigation and attitude measurement. These programs were adapted for these specific spacecraft applications. In addition, TI has extensive expertise in the design and production of advanced GPS receivers, including space-qualified GPS receivers. We have drawn on this background to augment the simulation results in the system level overview, which is Section 2 of this report.

Improving media message interpretation processing skills to promote healthy decision making about substance use: the effects of the middle school media ready curriculum.

PubMed

Kupersmidt, Janis B; Scull, Tracy M; Benson, Jessica W

2012-01-01

The Media Ready Program was designed as a middle school, media literacy education, preventive intervention program to improve adolescents' media literacy skills and reduce their intention to use alcohol or tobacco products. In a short-term efficacy trial, schools in North Carolina were randomly assigned to conditions (Media Ready: n = 214; control: n = 198). Boys in the Media Ready group reported significantly less intention to use alcohol in the future than did boys in the control group. Also, students in the Media Ready group who had used tobacco in the past reported significantly less intention to use tobacco in the future than did students in the control group who had previously used tobacco. Multilevel multiple mediation analyses suggest that the set of logical analysis Message Interpretation Processing variables mediated the program's effect on students' intentions to use alcohol or tobacco in the future.

A thought on the integration of poverty relief with family planning.

PubMed

Yang, K

1997-01-01

This article discusses the relationship between population growth and poverty in China, the issue of overpopulation in poor areas, and the need for programs that integrate population control with economic development. The number of Chinese living in poverty declined from about 250 million in 1978 to 80 million in 1993. In March 1994, the government initiated a poverty relief program that aimed to eliminate all poverty by 2001. By 1995, the number of poor declined to 65 million. The causes of poverty are numerous, but include overpopulation. Over the decades, demographic trends in poor areas reveal higher fertility, lower mortality, and higher growth. Poverty appears to be concentrated in 18 provinces and autonomous regions. Poor areas have higher rates of early marriage, early childbirth, and multiple children. Poor areas also have higher rates of disabilities and disease and lower levels of education. Poor areas have double the national percentage of illiterates. Many people living in poor areas are disadvantaged by poor transportation, remote locations, backward production methods, and a lack of a social security system. Scientific knowledge about contraception and quality child care are difficult to diffuse in poor areas. The size of the population denominator directly affects per capita income and per capita grain production. Increases in population put pressure on investment resources for production and development. A larger work force adds to the problem of unemployment. A large population size puts pressure on arable land. Poor areas need a better educated population. Sustainable development requires fertility decline. Integrated family planning programs popularize slogans such as "stabilize grain yield, increase income, and control population growth." Integrated programs have had variable success. Countermeasures must be taken to prevent the association of large families with wealth. Leadership is essential.

Flow behavior in liquid molding

NASA Technical Reports Server (NTRS)

Hunston, D.; Phelan, F.; Parnas, R.

1992-01-01

The liquid molding (LM) process for manufacturing polymer composites with structural properties has the potential to significantly lower fabrication costs and increase production rates. LM includes both resin transfer molding and structural reaction injection molding. To achieve this potential, however, the underlying science base must be improved to facilitate effective process optimization and implementation of on-line process control. The National Institute of Standards and Technology (NIST) has a major program in LM that includes materials characterization, process simulation models, on-line process monitoring and control, and the fabrication of test specimens. The results of this program are applied to real parts through cooperative projects with industry. The key feature in the effort is a comprehensive and integrated approach to the processing science aspects of LM. This paper briefly outlines the NIST program and uses several examples to illustrate the work.

Analysis of recruitment and industrial human resources management for optimal productivity in the presence of the HIV/AIDS epidemic.

PubMed

Okosun, Kazeem O; Makinde, Oluwole D; Takaidza, Isaac

2013-01-01

The aim of this paper is to analyze the recruitment effects of susceptible and infected individuals in order to assess the productivity of an organizational labor force in the presence of HIV/AIDS with preventive and HAART treatment measures in enhancing the workforce output. We consider constant controls as well as time-dependent controls. In the constant control case, we calculate the basic reproduction number and investigate the existence and stability of equilibria. The model is found to exhibit backward and Hopf bifurcations, implying that for the disease to be eradicated, the basic reproductive number must be below a critical value of less than one. We also investigate, by calculating sensitivity indices, the sensitivity of the basic reproductive number to the model's parameters. In the time-dependent control case, we use Pontryagin's maximum principle to derive necessary conditions for the optimal control of the disease. Finally, numerical simulations are performed to illustrate the analytical results. The cost-effectiveness analysis results show that optimal efforts on recruitment (HIV screening of applicants, etc.) is not the most cost-effective strategy to enhance productivity in the organizational labor force. Hence, to enhance employees' productivity, effective education programs and strict adherence to preventive measures should be promoted.

Challenges of Tobacco Control Program in Iran.

PubMed

Poorolajal, Jalal; Mohammadi, Younes; Mahmoodi, Azam

2017-04-01

This study assessed the status of cigarette marketing in Iran as well as the attitude of smokers toward smoking and the policies and tobacco control programs in the country. This cross-sectional study was conducted on 3480 volunteer smokers in six provinces, using a stratified cluster random sampling method. The study population consisted of smokers who used at least one cigarette per day. The data collection tool was an anonymous self-administered questionnaire including basic information and 20 five-choice questions related to participants' attitude toward smoking habits (Cronbach's alpha; 79.73%.). The majority (66.9%) of participants started smoking at the age of 10 to 19 years and 61.1% used foreign cigarettes. Of 160 marketed brands, 38 (23.8%) were domestic and 122 (76.2%) were foreign, including 63 (39.3%) imported and 59 (36.9%) smuggled brands. Being tempted (25.0%), getting nervous (24.1%), and seeking euphoria (24.1%) were the most common reasons for restarting cigarette smoking after cessation. The majority of participants believed that smoking in public places was a violation of the rights of others and smoking should be avoided in such places. Smoking prevention programs should focus on adolescents as the most vulnerable age group. Raising the retail price of tobacco products through increasing taxes can reduce consumption, particularly among first starters and youth. However, increasing taxes and prices of tobacco products may be effective when simultaneous effective measures are implemented to eliminate all kinds of illicit trade in all forms of tobacco products.

Advanced Simulation and Computing Fiscal Year 2016 Implementation Plan, Version 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCoy, M.; Archer, B.; Hendrickson, B.

2015-08-27

The Stockpile Stewardship Program (SSP) is an integrated technical program for maintaining the safety, surety, and reliability of the U.S. nuclear stockpile. The SSP uses nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of experimental facilities and programs, and the computational capabilities to support these programs. The purpose of this IP is to outline key work requirements to be performed and to control individualmore » work activities within the scope of work. Contractors may not deviate from this plan without a revised WA or subsequent IP.« less

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 repesentatives from aerospace and computer companies. The IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management are summarized and plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems are discussed.

Ranking of Texas reservoirs for application of carbon dioxide miscible displacement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ham, J

Of the 431 reservoirs screened, 211 projected revenue that exceeded cost, ie, were profitable. Only the top 154 reservoirs, however, showed a profit greater than 30%. The top 10 reservoirs predicted a profit of at least 80%. Six of the top ten were Gulf Coast sandstones. The reservoirs are representative of the most productive discoveries in Texas; they account for about 72% of the recorded 52 billion barrels oil production in the State. Preliminary evaluation in this study implied that potential production from CO{sub 2}-EOR could be as much as 4 billion barrels. In order to enhance the chances ofmore » achieving this, DOE should consider a targeted outreach program to the specific independent operators controlling the leases. Development of ownership/technical potential maps and an outreach program should be initiated to aid this identification.« less

Schistosomiasis elimination strategies and potential role of a vaccine in achieving global health goals.

PubMed

Mo, Annie X; Agosti, Jan M; Walson, Judd L; Hall, B Fenton; Gordon, Lance

2014-01-01

In March 2013, the National Institute of Allergy and Infectious Diseases and the Bill and Melinda Gates Foundation co-sponsored a meeting entitled "Schistosomiasis Elimination Strategy and Potential Role of a Vaccine in Achieving Global Health Goals" to discuss the potential role of schistosomiasis vaccines and other tools in the context of schistosomiasis control and elimination strategies. It was concluded that although schistosomiasis elimination in some focal areas may be achievable through current mass drug administration programs, global control and elimination will face several significant scientific and operational challenges, and will require an integrated approach with other, additional interventions. These challenges include vector (snail) control; environmental modification; water, sanitation, and hygiene; and other future innovative tools such as vaccines. Defining a clear product development plan that reflects a vaccine strategy as complementary to the existing control programs to combat different forms of schistosomiasis will be important to develop a vaccine effectively.

Army Air Ambulance Blood Product Program in the Combat Zone and Challenges to Best Practices.

PubMed

Powell-Dunford, Nicole; Quesada, Jose F; Gross, Kirby R; Shackelford, Stacy A

2016-08-01

Identify challenges and best practices in the development of an austere air ambulance transfusion program. A search of PubMed using combinations of the key terms 'prehospital,' 'blood product,' 'red blood cells,' 'damage control resuscitation,' 'transfusion,' 'air ambulance,' 'medical evacuation,' and 'medevac' yielded 196 articles for further analysis, with 14 articles suitable for addressing the background of prehospital transfusion within a helicopter. Retrospective analysis of unclassified briefs, after action reports, and procedures was also undertaken along with interview of subject matter experts. The initial series of 15 transfusions were discussed telephonically among flight crew, trauma surgeons, and lab specialists. Review of Joint Theater System data was readily available for 84 U.S. Army air ambulance transfusions between May-December 2012, with December marking the redeployment of the 25(th) Combat Aviation Brigade. Standardized implementation enabled safe blood product administration for 84 causalities from May-December 2012 without blood product shortage, expiration, or transfusion reaction. Challenges included developing transfusion competency, achieving high quality blood support, countering the potential for anti-U.S. sentiment, and diversity in coalition transfusion practices. Blood product administration aboard the air ambulance is logistically complex, requiring blood bank integration. Repetitive training enabled emergency medical technicians (EMTs) with basic medical training to safely perform transfusion in accordance with clinical operating guidelines. In the austere environment, logistic factors are significant challenges and political sensitivities are important considerations. Best practices may facilitate new en route transfusion programs. Powell-Dunford N, Quesada JF, Gross KR, Shackelford SA. Army air ambulance blood product program in the combat zone and challenges to best practices. Aerosp Med Hum Perform. 2016; 87(8):728-734.

78 FR 26716 - Airworthiness Directives; Airbus Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-08

... currently requires a repetitive inspection program on certain check valves in the hydraulic systems that... hydraulic systems on airplanes that have had a certain modification embodied during production or in-service... hydraulic leaks, possibly leading to the loss of all three hydraulic systems and consequent loss of control...

Judy Netter | NREL

Science.gov Websites

thermochemical reactions (primarily hydrogen production), and recently Solar Power Tower Receiver design. She has . Her expertise involves the design and fabrication of prototype experimental equipment along with the programs and controls. CSP-related projects include the design of experiments and test equipment for

76 FR 69693 - Tolerance Crop Grouping Program III

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... under the authority of Canada's Pest Control Products (PCP) Act (2002), establish equivalent crop groups... superseded by a Group 14-11 tolerance, since the representative commodities are equivalent. When all crop... revisions would expand existing crop groups for stone fruits and tree nuts by establishing new crop...

9 CFR 317.309 - Nutrition label content.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... only through a weight-control program qualify for nutrition claims. (3) The declaration of nutrient and...

9 CFR 317.309 - Nutrition label content.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Nutrition label content. 317.309... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS Nutrition Labeling § 317.309 Nutrition... only through a weight-control program qualify for nutrition claims. (3) The declaration of nutrient and...

A Social Systems Approach to Evaluation Research.

ERIC Educational Resources Information Center

Olien, C. N.; And Others

An information-control systems model for evaluation of adult education programs is offered and illustrated. The model is based upon identifying principal subsystems, such as source, channel and audience, which are involved in initiation, production, delivery and reception of educational messages. These subsystems are seen as separate but…

U.S. Forest Service termiticide tests

Treesearch

Terence Wagner

2003-01-01

The U.S. Forest Service has been testingchemicals for termite control since 1939. Today its termiticide testing program is nationally recognized for providing unbiased efficacy data for product registration using standardized tests, sites, and evaluation procedures. Virtually all termiticides undergo Forest Service testing before being registered by EPA. Termiticides...

United Kingdom: Quality with Control.

ERIC Educational Resources Information Center

Paulu, Burton

1978-01-01

Describes the autonomous workings of the British Broadcasting Corporation and the Independent Broadcasting Authority, where editorializing is prohibited, advertising is limited, and the aim of programing is to provide the public with real choices at all hours, and to maintain high standards of planning, writing, production, and presentation. (JMF)

Strategic Environmental Research and Development Program, Fiscal Year 2007

DTIC Science & Technology

2008-02-01

NDMA ), a product of rocket fuel, in groundwater...National Association of Ordnance Contractors iv Acronyms and Abbreviations (continued) NBVC Naval Base Ventura County NDMA N...Berkeley • Abiotic and Biotic Mechanisms Controlling In Situ Remediation of NDMA (ER-1421), Pacific Northwest National Laboratory • Biodegradation

New Media, Old Politics.

ERIC Educational Resources Information Center

Rosenzweig, Ron; And Others

1995-01-01

Summarizes and outlines the controversy surrounding some of the content of Voyager Co.'s "Who Built America?", history CD-ROM package. Although highly praised, the program received criticism for its limited references to homosexuality, birth control, and abortion. Voyager Co. refused to drop the product after a computer-linked campaign…

RESEARCH PROGRAM FOR ALERTING, DETECTION AND IDENTIFICATION OF PATHOGENES.

DTIC Science & Technology

characteristic products. BHK-21 and RK-13 tissue cultures infected with NDV, influenza, YFV , Sendai, Vaccinia, and Herpes simplex showed a depletion of...infected and control serum could be detected in mice infected with YFV , influenza, Herpes simplex, and LDV superinfected with YFV . Several methods of

13 CFR 124.3 - What definitions are important in the 8(a) BD program?

Code of Federal Regulations, 2013 CFR

2013-01-01

... the marketing, production, sales, and administrative functions of the firm. Immediate family member... Native Hawaiians. Negative control is defined in part 121 of this title. Non-disadvantaged individual.... Primary industry classification means the six digit North American Industry Classification System (NAICS...

13 CFR 124.3 - What definitions are important in the 8(a) BD program?

Code of Federal Regulations, 2012 CFR

2012-01-01

... the marketing, production, sales, and administrative functions of the firm. Immediate family member... Native Hawaiians. Negative control is defined in part 121 of this title. Non-disadvantaged individual.... Primary industry classification means the six digit North American Industry Classification System (NAICS...

Retailer participation in cigarette company incentive programs is related to increased levels of cigarette advertising and cheaper cigarette prices in stores.

PubMed

Feighery, Ellen C; Ribisl, Kurt M; Schleicher, Nina C; Clark, Pamela I

2004-06-01

The retail outlet is the cigarette companies' major marketing channel to reach present and future customers. Of the $11.2 billion spent by them to market their products in 2001, approximately 85% was spent on retailer and consumer incentives to stimulate sales. This study examines the extent of retailer participation in these incentive programs, and the relationship between participation and the amount and placement of cigarette marketing materials and products, and prices in stores. Observational assessments of cigarette marketing materials, products, and prices were conducted in 468 stores in 15 U.S. states. Telephone interviews were conducted with store owners or managers of these stores to determine the details of their participation in incentive programs. Cigarette companies engaged 65% of retailers in an incentive program. Nearly 80% of participating retailers reported cigarette company control over placement of marketing materials in their stores. Stores that reported receiving over $3,000 from incentive programs in the past 3 months averaged 19.5 cigarette marketing materials, and stores receiving no money averaged only 8.2 marketing materials. In multivariate analyses, participation in incentive programs offered by Philip Morris and R.J. Reynolds was positively related to the number of cigarette marketing materials for each of these companies' brands in stores and the placement of their cigarettes on the top shelf. The price of Newports was significantly lower in stores that received incentives; no price difference was found for Marlboro. Stores that participate in cigarette company incentive programs feature more prominent placement of cigarettes and advertising, and may have cheaper cigarette prices.

The selective treatment of clinical mastitis based on on-farm culture results: II. Effects on lactation performance, including clinical mastitis recurrence, somatic cell count, milk production, and cow survival.

PubMed

Lago, A; Godden, S M; Bey, R; Ruegg, P L; Leslie, K

2011-09-01

The objective of this multi-state, multi-herd clinical trial was to report on the efficacy of using an on-farm culture system to guide strategic treatment decisions in cows with clinical mastitis. The study was conducted in 8 commercial dairy farms ranging in size from 144 to 1,795 cows from Minnesota, Wisconsin, and Ontario, Canada. A total of 422 cows affected with mild or moderate clinical mastitis in 449 quarters were randomly assigned to either (1) a positive-control treatment program or (2) an on-farm culture-based treatment program. Quarter cases assigned to the positive-control group received immediate on-label intramammary treatment with cephapirin sodium. Quarters assigned to the culture-based treatment program were not treated until the results of on-farm culture were determined after 18 to 24h of incubation. Quarters in the culture-based treatment program that had gram-positive growth or a mixed infection were treated according to label instruction using intramammary cephapirin sodium. Quarters assigned to the culture-based treatment program that had gram-negative or no-growth did not receive intramammary therapy. It was already reported in a companion paper that the selective treatment of clinical mastitis based on on-farm culture results decreases antibiotic use by half and tends to decrease milk withholding time without affecting short-term clinical and bacteriological outcomes. The present article reports on long-term outcomes of the aforementioned study. No statistically significant differences existed between cases assigned to the positive-control program and cases assigned to the culture-based treatment program in risk and days for recurrence of clinical mastitis in the same quarter (35% and 78 d vs. 43% and 82 d), linear somatic cell count (4.2 vs. 4.4), daily milk production (30.0 vs. 30.7 kg), and risk and days for culling or death events (28% and 160 d vs. 32% and 137 d) for the rest of the lactation after enrollment of the clinical mastitis case. In summary, the selective treatment of clinical mastitis based on on-farm culture resulted in no differences in long-term outcomes, such as recurrence of clinical mastitis in the same quarter, somatic cell count, milk production, and cow survival for the rest of the lactation after clinical mastitis. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Implementation of hazard analysis and critical control point (HACCP) in dried anchovy production process

NASA Astrophysics Data System (ADS)

Citraresmi, A. D. P.; Wahyuni, E. E.

2018-03-01

The aim of this study was to inspect the implementation of Hazard Analysis and Critical Control Point (HACCP) for identification and prevention of potential hazards in the production process of dried anchovy at PT. Kelola Mina Laut (KML), Lobuk unit, Sumenep. Cold storage process is needed in each anchovy processing step in order to maintain its physical and chemical condition. In addition, the implementation of quality assurance system should be undertaken to maintain product quality. The research was conducted using a survey method, by following the whole process of making anchovy from the receiving raw materials to the packaging of final product. The method of data analysis used was descriptive analysis method. Implementation of HACCP at PT. KML, Lobuk unit, Sumenep was conducted by applying Pre Requisite Programs (PRP) and preparation stage consisting of 5 initial stages and 7 principles of HACCP. The results showed that CCP was found in boiling process flow with significant hazard of Listeria monocytogenesis bacteria and final sorting process with significant hazard of foreign material contamination in the product. Actions taken were controlling boiling temperature of 100 – 105°C for 3 - 5 minutes and training for sorting process employees.

Virtual collaborative environments: programming and controlling robotic devices remotely

NASA Astrophysics Data System (ADS)

Davies, Brady R.; McDonald, Michael J., Jr.; Harrigan, Raymond W.

1995-12-01

This paper describes a technology for remote sharing of intelligent electro-mechanical devices. An architecture and actual system have been developed and tested, based on the proposed National Information Infrastructure (NII) or Information Highway, to facilitate programming and control of intelligent programmable machines (like robots, machine tools, etc.). Using appropriate geometric models, integrated sensors, video systems, and computing hardware; computer controlled resources owned and operated by different (in a geographic sense as well as legal sense) entities can be individually or simultaneously programmed and controlled from one or more remote locations. Remote programming and control of intelligent machines will create significant opportunities for sharing of expensive capital equipment. Using the technology described in this paper, university researchers, manufacturing entities, automation consultants, design entities, and others can directly access robotic and machining facilities located across the country. Disparate electro-mechanical resources will be shared in a manner similar to the way supercomputers are accessed by multiple users. Using this technology, it will be possible for researchers developing new robot control algorithms to validate models and algorithms right from their university labs without ever owning a robot. Manufacturers will be able to model, simulate, and measure the performance of prospective robots before selecting robot hardware optimally suited for their intended application. Designers will be able to access CNC machining centers across the country to fabricate prototypic parts during product design validation. An existing prototype architecture and system has been developed and proven. Programming and control of a large gantry robot located at Sandia National Laboratories in Albuquerque, New Mexico, was demonstrated from such remote locations as Washington D.C., Washington State, and Southern California.

Dynamic optimization case studies in DYNOPT tool

NASA Astrophysics Data System (ADS)

Ozana, Stepan; Pies, Martin; Docekal, Tomas

2016-06-01

Dynamic programming is typically applied to optimization problems. As the analytical solutions are generally very difficult, chosen software tools are used widely. These software packages are often third-party products bound for standard simulation software tools on the market. As typical examples of such tools, TOMLAB and DYNOPT could be effectively applied for solution of problems of dynamic programming. DYNOPT will be presented in this paper due to its licensing policy (free product under GPL) and simplicity of use. DYNOPT is a set of MATLAB functions for determination of optimal control trajectory by given description of the process, the cost to be minimized, subject to equality and inequality constraints, using orthogonal collocation on finite elements method. The actual optimal control problem is solved by complete parameterization both the control and the state profile vector. It is assumed, that the optimized dynamic model may be described by a set of ordinary differential equations (ODEs) or differential-algebraic equations (DAEs). This collection of functions extends the capability of the MATLAB Optimization Tool-box. The paper will introduce use of DYNOPT in the field of dynamic optimization problems by means of case studies regarding chosen laboratory physical educational models.

Overlapping Residual Herbicides for Control of Photosystem (PS) II- and 4-Hydroxyphenylpyruvate Dioxygenase (HPPD)-Inhibitor-Resistant Palmer amaranth (Amaranthus palmeri S. Watson) in Glyphosate-Resistant Maize

PubMed Central

Chahal, Parminder S.; Ganie, Zahoor A.; Jhala, Amit J.

2018-01-01

A Palmer amaranth (Amaranthus palmeri S. Watson) biotype has evolved resistance to photosystem (PS) II- (atrazine) and 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicides (mesotrione, tembotrione, and topramezone) in maize seed production field in Nebraska, USA. The objectives of this study were to determine the effect of soil residual pre-emergence (PRE) herbicides followed by (fb) tank-mixture of residual and foliar active post-emergence (POST) herbicides on PS-II- and HPPD-inhibitor-resistant Palmer amaranth control, maize yield, and net economic returns. Field experiments were conducted in a grower's field infested with PS II- and HPPD-inhibitor-resistant Palmer amaranth near Shickley in Fillmore County, Nebraska, USA in 2015 and 2016. The contrast analysis suggested that saflufenacil plus dimethenamid-P or pyroxasulfone plus saflufenacil applied PRE provided 80–82% Palmer amaranth control compared to 65 and 39% control with saflufenacil and pyroxasulfone applied alone at 3 weeks after PRE (WAPRE), respectively. Among the PRE fb POST herbicide programs, 95–98% Palmer amaranth control was achieved with pyroxasulfone plus safluefenacil, or saflufenacil plus dimethenamid-P applied PRE, fb glyphosate plus topramezone plus dimethenamid-P plus atrazine, glyphosate plus diflufenzopyr plus dicamba plus pyroxasulfone, glyphosate plus diflufenzopyr plus pendimethalin, or glyphosate plus diflufenzopyr plus dicamba plus atrazine applied POST at 3 weeks after POST (WAPOST) through maize harvest. Based on contrast analysis, PRE fb POST programs provided 77–83% Palmer amaranth control at 3 WAPOST through maize harvest compared to 12–15% control with PRE-only and 66–84% control with POST-only programs. Similarly, PRE fb POST programs provided 99% biomass reduction at 6 WAPOST compared to PRE-only (28%) and POST-only (87%) programs. PRE fb POST programs provided higher maize yield (13,617 kg ha−1) and net return (US $1,724 ha−1) compared to the PRE-only (2,656 kg ha−1; US $285 ha−1) and POST-only (11,429 kg ha−1; US $1,539 ha−1) programs. The results indicated that effective control of multiple herbicide-resistant Palmer amaranth can be achieved with PRE fb POST programs that include herbicides with overlapping residual activity to maintain season-long control. PMID:29375605

Identifying Quantitative Trait Loci (QTLs) and Developing Diagnostic Markers Linked to Orange Rust Resistance in Sugarcane (Saccharum spp.)

PubMed Central

Yang, Xiping; Islam, Md. S.; Sood, Sushma; Maya, Stephanie; Hanson, Erik A.; Comstock, Jack; Wang, Jianping

2018-01-01

Sugarcane (Saccharum spp.) is an important economic crop, contributing up to 80% of table sugar used in the world and has become a promising feedstock for biofuel production. Sugarcane production has been threatened by many diseases, and fungicide applications for disease control have been opted out for sustainable agriculture. Orange rust is one of the major diseases impacting sugarcane production worldwide. Identifying quantitative trait loci (QTLs) and developing diagnostic markers are valuable for breeding programs to expedite release of superior sugarcane cultivars for disease control. In this study, an F1 segregating population derived from a cross between two hybrid sugarcane clones, CP95-1039 and CP88-1762, was evaluated for orange rust resistance in replicated trails. Three QTLs controlling orange rust resistance in sugarcane (qORR109, qORR4 and qORR102) were identified for the first time ever, which can explain 58, 12 and 8% of the phenotypic variation, separately. We also characterized 1,574 sugarcane putative resistance (R) genes. These sugarcane putative R genes and simple sequence repeats in the QTL intervals were further used to develop diagnostic markers for marker-assisted selection of orange rust resistance. A PCR-based Resistance gene-derived maker, G1 was developed, which showed significant association with orange rust resistance. The putative QTLs and marker developed in this study can be effectively utilized in sugarcane breeding programs to facilitate the selection process, thus contributing to the sustainable agriculture for orange rust disease control. PMID:29616061