Horizontal environmental assessment of building products in relation to the construction products directive (CPD).

PubMed

Schiopu, Nicoleta; Jayr, Emmanuel; Méhu, Jacques; Barna, Ligia; Moszkowicz, Pierre

2007-01-01

According to the European Construction Products Directive (89/106/EC), construction products must satisfy specified essential requirements (ER). To comply with ER 3, on hygiene, health and environment, the construction works must be designed and built in such a way that they will not be a threat to the hygiene and health of the occupants and neighbours, nor to the environment. Standardised test methods for the release of substances that are hazardous to health and environment need to be developed at the European level. A horizontal approach is considered the best route for such test development and consists of the development of a test method applicable for different products used in a certain scenario (across the fields of different Technical Committees). The work presented here regards the emission of pollutants towards soil and water and has been carried out on monolith products, based on three types of matrices: concrete, wood and metal (zinc). The aim of the work is to study the parameters (nature of leachant, temperature, liquid-to-solid ratio) that could influence the release behaviour of substances in water. The knowledge acquired from these tests will allow the identification of some parameters needed for the development of a horizontal test.

Correlation of in vitro challenge testing with consumer use testing for cosmetic products.

PubMed Central

Brannan, D K; Dille, J C; Kaufman, D J

1987-01-01

An in vitro microbial challenge test has been developed to predict the likelihood of consumer contamination of cosmetic products. The challenge test involved inoculating product at four concentrations (30, 50, 70, and 100%) with microorganisms known to contaminate cosmetics. Elimination of these microorganisms at each concentration was followed over a 28-day period. The test was used to classify products as poorly preserved, marginally preserved, or well preserved. Consumer use testing was then used to determine whether the test predicted the risk of actual consumer contamination. Products classified by the challenge test as poorly preserved returned 46 to 90% contaminated after use. Products classified by the challenge test as well preserved returned with no contamination. Marginally preserved products returned with 0 to 21% of the used units contaminated. As a result, the challenge test described can be accurately used to predict the risk of consumer contamination of cosmetic products. PMID:3662517

Rubidium frequency standard test program for NAVSTAR GPS

NASA Technical Reports Server (NTRS)

Koide, F.; Dederich, D. J.

1978-01-01

Test data of the RFS Program in the Production phase and computer automation are presented, as an essential element in the evaluation of the RFS performance in a simulated spacecraft environment. Typical production test data will be discussed for stabilities from 1 to 100,000 seconds averaging time and simulated time error accumulation test. Also, design considerations in developing the RFS test systems for the acceptance test in production are discussed.

Development and assessment of disinfectant efficacy test methods for regulatory purposes.

PubMed

Tomasino, Stephen F

2013-05-01

The United States Environmental Protection Agency regulates pesticidal products, including products with antimicrobial activity. Test guidelines have been established to inform manufacturers of which methodology is appropriate to support a specific efficacy claim. This paper highlights efforts designed to improve current methods and the development and assessment of new test methods. Published by Mosby, Inc.

A review of test results on parabolic dish solar thermal power modules with dish-mounted Rankine engines and for production of process steam

NASA Technical Reports Server (NTRS)

Jaffe, Leonard D.

1988-01-01

This paper presents results of development testing of various solar thermal parabolic dish modules and assemblies. Most of the tests were at modules and assemblies that used a dish-mounted, organic Rankine cycle turbine for production of electric power. Some tests were also run on equipment for production of process steam or for production of electricity using dish-mounted reciprocating steam engines. These tests indicate that early modules achieve efficiencies of about 18 percent in converting sunlight to electricity (excluding the inverter but including parasitics). A number of malfunctions occurred. The performance measurements, as well as the malfunctions and other operating experience, provided information that should be of value in developing systems with improved performance and reduced maintenance.

Environmental impact studies for gas hydrate production test in the Ulleung Basin, East Sea of Korea

NASA Astrophysics Data System (ADS)

Ryu, Byong-Jae

2017-04-01

To develop potential future energy resources, the Korean National Gas Hydrate Program has been carried out since 2005. The program has been supported by the Ministry of Trade, Industry and Energy (MOTIE), and carried out by the Korea Institute of Geoscience and Mineral Resources (KIGAM), the Korea Gas Corporation (KOGAS) and the Korea National Oil Corporation (KNOC) under the management of Gas Hydrate R&D Organization (GHDO). As a part of this national program, geophysical surveys, geological studies on gas hydrates and two deep drilling expeditions were performed. Gas hydrate-bearing sand layers suitable for production using current technologies were found during the Second Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010. Environmental impact studies (EIS) also have been carried out since 2012 by KIGAM in cooperation with domestic and foreign universities and research organizations to ensure safe production test that will be performed in near future. The schedule of production test is being planned. The EIS includes assessment of environmental risks, examination on domestic environmental laws related with production test, collection of basic oceanographic information, and baseline and monitoring surveys. Oceanographic information and domestic environmental laws are already collected and analyzed. Baseline survey has been performed using the in-house developed system, KIGAM Seafloor Observation System (KISOS) since 2013. It will also be performed. R/V TAMHAE II of KIGAM used for KISOS operation. As a part of this EIS, pseudo-3D Chirp survey also was carried out in 2014 to determine the development of fault near the potential testing site. Using KIGAM Seafloor Monitoring System (KIMOS), monitoring survey is planned to be performed from three month before production test to three months after production test. The geophysical survey for determining the change of gas hydrate reservoirs and production-efficiency around the production well would also be conducted before and after the production test. KIMOS will be developed as the planning that was drawn up already. A period for monitoring survey and geophysical survey type, such as AUV or EM surveys will be decided according to the budget.

Development of an immunochromatographic strip test for rapid detection of melamine in raw milk, milk products, and animal feed

USDA-ARS?s Scientific Manuscript database

A simple, rapid and sensitive immunogold chromatographic strip test based on a monoclonal antibody was developed for the detection of melamine (MEL) residues in raw milk, milk products and animal feed. The limit of detection was estimated to be 0.05 µg/mL in raw milk, since the detection test line ...

Production development of organic nonflammable spacecraft potting, encapsulating and conformal coating compounds. Volume 3: Appendices

NASA Technical Reports Server (NTRS)

Lieberman, S. L.

1974-01-01

Appendices are presented which include: statement of work; material vendor contacts; formulation/processing data sheet; upward propagation test; flammability test conditions/results sheet; odor test; vacuum stability requirements; flammability test facility; determination of offgassing products and carbon monoxide test; and pneumatic and mechanical impact test guidelines.

Development of environmentally conscious cleaning process for leadless chip carrier assemblies. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, B.E.

1995-04-01

A cross-functional team of process, product, quality, material, and design lab engineers was assembled to develop an environmentally friendly cleaning process for leadless chip carrier assemblies (LCCAs). Using flush and filter testing, Auger surface analysis, GC-Mass spectrophotometry, production yield results, and electrical testing results over an extended testing period, the team developed an aqueous cleaning process for LCCAs. The aqueous process replaced the Freon vapor degreasing/ultrasonic rinse process.

The use of by-products from metallurgical and mineral industries as filler in cement-based materials.

PubMed

Moosberg, Helena; Lagerblad, Björn; Forssberg, Eric

2003-02-01

This investigation has been made in order to make it possible to increase the use of by-products in cement-based materials. Use of by-products requires a screening procedure that will reliably determine their impact on concrete. A test procedure was developed. The most important properties were considered to be strength development, shrinkage, expansion and workability. The methods used were calorimetry, flow table tests, F-shape measurements, measurements of compressive and flexural strength and shrinkage/expansion measurements. Scanning electron microscopy was used to verify some results. Twelve by-products were collected from Swedish metallurgical and mineral industries and classified according to the test procedure. The investigation showed that the test procedure clearly screened out the materials that can be used in the production of concrete from the unsuitable ones.

New techniques for test development for tactical auto-pilots using microprocessors

NASA Astrophysics Data System (ADS)

Shemeta, E. H.

1980-07-01

This paper reports on a demonstration of the application of the method to generate system level tests for a typical tactical missile autopilot. The test algorithms are based on the autopilot control law. When loaded on the tester with appropriate control information, the complete autopilot is tested to establish if the specified control law requirements are met. Thus, the test procedure not only checks to see if the hardware is functional, but also checks the operational software. The technique also uses a 'learning' mode to allow minor timing or functional deviations from the expected responses to be incorporated in the test procedures. A potential application of this test development technique is the extraction of production test data for the various subassemblies. The technique will 'learn' the input-output patterns forming the basis for developement and production tests. If successful, these new techniques should allow the test development process to keep pace with semiconductor progress.

40 CFR 80.171 - Product transfer documents (PTDs).

Code of Federal Regulations, 2010 CFR

2010-07-01

... being transferred is exempt base gasoline to be used for research, development, or test purposes only, the following warning must also be stated on the PTD: “For use in research, development, and test... codes and other non-regulatory language. (1) Product codes and other non-regulatory language may not be...

A Methodology for Assessing the Impact of Sea Level Rise on Representative Military Installations in the Southwestern United States (RC-1703)

DTIC Science & Technology

2014-03-03

results. As part of this research and development effort, a number of products were developed that served to advance the research and provided a testing ...Teams, U.S. Navy SEALs, brown‐water Navy personnel, and Naval Reserve Officer Training Corps midshipmen. The base conducts research and tests of newly...effort, a number of products were developed that served to advance the research , and provided a testing ground for our methodologies. In addition

Future Food Production System Development Pulling From Space Biology Crop Growth Testing in Veggie

NASA Technical Reports Server (NTRS)

Massa, Gioia; Romeyn, Matt; Fritsche, Ralph

2017-01-01

Preliminary crop testing using Veggie indicates the environmental conditions provided by the ISS are generally suitable for food crop production. When plant samples were returned to Earth for analysis, their levels of nutrients were comparable to Earth-grown ground controls. Veggie-grown produce food safety microbiology analysis indicated that space-grown crops are safe to consume. Produce sanitizing wipes were used on-orbit to further reduce risk of foodborne illness. Validation growth tests indicated abiotic challenges of insufficient or excess fluid delivery, potentially reduced air flow leading to excess water, elevated CO2 leading to physiological responses, and microorganisms that became opportunistic pathogens. As NASA works to develop future space food production, several areas of research to define these systems pull from the Veggie technology validation tests. Research into effective, reusable water delivery and water recovery methods for future food production systems arises from abiotic challenges observed. Additionally, impacts of elevated CO2 and refinement of fertilizer and light recipes for crops needs to be assessed. Biotic pulls include methods or technologies to effectively sanitize produce with few consumables and low inputs; work to understand the phytomicrobiome and potentially use it to protect crops or enhance growth; selection of crops with high harvest index and desirable flavors for supplemental nutrition; crops that provide psychosocial benefits, and custom space crop development. Planning for future food production in a deep space gateway or a deep space transit vehicle requires methods of handling and storing seeds, and ensuring space seeds are free of contaminants and long-lived. Space food production systems may require mechanization and autonomous operation, with preliminary testing initiated to identify operations and capabilities that are candidates for automation. Food production design is also pulling from Veggie logistics lessons, as we learn about growing at different scales and move toward developing systems that require less launch mass. Veggie will be used as a test bed for novel food production technologies. Veggie is a relatively simple precursor food production system but the knowledge gained from space biology validation tests in Veggie will have far reaching repercussions on future exploration food production. This work is supported by NASA.

Future Food Production System Development Pulling from Space Biology Crop Growth Testing in Veggie

NASA Technical Reports Server (NTRS)

Massa, G. D.; Romeyn, M. W.; Fritsche, R. F.

2017-01-01

Preliminary crop testing using Veggie indicates the environmental conditions provided by the ISS are generally suitable for food crop production. When plant samples were returned to Earth for analysis, their levels of nutrients were comparable to Earth-grown ground controls. Veggie-grown produce food safety microbiology analysis indicated that space-grown crops are safe to consume. Produce sanitizing wipes were used on-orbit to further reduce risk of foodborne illness. Validation growth tests indicated abiotic challenges of insufficient or excess fluid delivery, potentially reduced air flow leading to excess water, elevated CO2 leading to physiological responses, and microorganisms that became opportunistic pathogens. As NASA works to develop future space food production, several areas of research to define these systems pull from the Veggie technology validation tests. Research into effective, reusable water delivery and water recovery methods for future food production systems arises from abiotic challenges observed. Additionally, impacts of elevated CO2 and refinement of fertilizer and light recipes for crops needs to be assessed. Biotic pulls include methods or technologies to effectively sanitize produce with few consumables and low inputs; work to understand the phytomicrobiome and potentially use it to protect crops or enhance growth; selection of crops with high harvest index and desirable flavors for supplemental nutrition; crops that provide psychosocial benefits, and custom space crop development. Planning for future food production in a deep space gateway or a deep space transit vehicle requires methods of handling and storing seeds, and ensuring space seeds are free of contaminants and long-lived. Space food production systems may require mechanization and autonomous operation, with preliminary testing initiated to identify operations and capabilities that are candidates for automation. Food production design is also pulling from Veggie logistics lessons, as we learn about growing at different scales and move toward developing systems that require less launch mass. Veggie will be used as a test bed for novel food production technologies. Veggie is a relatively simple precursor food production system but the knowledge gained from space biology validation tests in Veggie will have far reaching repercussions on future exploration food production.

Science and Technology in Development Environments - Industry and Department of Defense Case Studies

DTIC Science & Technology

2003-11-01

an acronym for Product and Cycle Time Excellence, is designed to manage product development , business development , and business alliance processes...experiments. 3. Test Practicality—Pilot development with limited production. 4. Prove Profitability—Pilot production. 5. Manage Life Cycle —Manufacturing and...compressor, particularly in a turbofan configuration, was developed primarily under a CIP for these two engines. The TF30 and F100 experiences provide

Industry's View on Using Quality Control, Biorelevant, and Clinically Relevant Dissolution Tests for Pharmaceutical Development, Registration, and Commercialization.

PubMed

Grady, Haiyan; Elder, David; Webster, Gregory K; Mao, Yun; Lin, Yiqing; Flanagan, Talia; Mann, James; Blanchard, Andy; Cohen, Michael J; Lin, Judy; Kesisoglou, Filippos; Hermans, Andre; Abend, Andreas; Zhang, Limin; Curran, David

2018-01-01

This article intends to summarize the current views of the IQ Consortium Dissolution Working Group, which comprises various industry companies, on the roles of dissolution testing throughout pharmaceutical product development, registration, commercialization, and beyond. Over the past 3 decades, dissolution testing has evolved from a routine and straightforward test as a component of end-product release into a comprehensive set of tools that the developer can deploy at various stages of the product life cycle. The definitions of commonly used dissolution approaches, how they relate to one another and how they may be applied in modern drug development, and life cycle management is described in this article. Specifically, this article discusses the purpose, advantages, and limitations of quality control, biorelevant, and clinically relevant dissolution methods. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Plan for CELSS test bed project

NASA Technical Reports Server (NTRS)

Knott, W. M.

1986-01-01

The Closed Ecological Life Support Systems (CELSS) testbed project will achieve two major goals: It will develop the knowledge and technology needed to build and test biological or combined biological physiochemical regenerative life support systems. It will fabricate, test, and operate ground based facilities to accomplish proof-of-concent testing and evaluation leading to flight experimentation. The project will combine basic research and applied research/engineering to achieve a phased, integrated development of hardware, systems, and techniques for food and oxygen production, food processing, and waste processing in closed systems. The project will design, fabricate, and operate within three years a botanical production system scaled to a sufficient size to verify oxygen and nutrient load production (carbohydrates, fats, proteins) at a useable level. It will develop within five years a waste management system compatible with the botanical production system and a food processing system that converts available biomass into edible products. It will design, construct, and operate within ten years a ground based candidate CELSS that includes man as an active participant in the system. It will design a flight CELSS module within twelve years and construct and conduct initial flight tests within fifteen years.

27 CFR 25.196 - Removals for research, development or testing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... beer removed for research, development, or testing in daily records under § 25.292 and on the Brewer's... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removals for research... Analysis, Research, Development Or Testing § 25.196 Removals for research, development or testing. (a) A...

27 CFR 25.196 - Removals for research, development or testing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... beer removed for research, development, or testing in daily records under § 25.292 and on the Brewer's... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Removals for research... Analysis, Research, Development Or Testing § 25.196 Removals for research, development or testing. (a) A...

SMART empirical approaches for predicting field performance of PV modules from results of reliability tests

NASA Astrophysics Data System (ADS)

Hardikar, Kedar Y.; Liu, Bill J. J.; Bheemreddy, Venkata

2016-09-01

Gaining an understanding of degradation mechanisms and their characterization are critical in developing relevant accelerated tests to ensure PV module performance warranty over a typical lifetime of 25 years. As newer technologies are adapted for PV, including new PV cell technologies, new packaging materials, and newer product designs, the availability of field data over extended periods of time for product performance assessment cannot be expected within the typical timeframe for business decisions. In this work, to enable product design decisions and product performance assessment for PV modules utilizing newer technologies, Simulation and Mechanism based Accelerated Reliability Testing (SMART) methodology and empirical approaches to predict field performance from accelerated test results are presented. The method is demonstrated for field life assessment of flexible PV modules based on degradation mechanisms observed in two accelerated tests, namely, Damp Heat and Thermal Cycling. The method is based on design of accelerated testing scheme with the intent to develop relevant acceleration factor models. The acceleration factor model is validated by extensive reliability testing under different conditions going beyond the established certification standards. Once the acceleration factor model is validated for the test matrix a modeling scheme is developed to predict field performance from results of accelerated testing for particular failure modes of interest. Further refinement of the model can continue as more field data becomes available. While the demonstration of the method in this work is for thin film flexible PV modules, the framework and methodology can be adapted to other PV products.

Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed.

PubMed

Helu, Moneer; Hedberg, Thomas

2015-01-01

Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes a concept for a product lifecycle test bed built on a cyber-physical infrastructure that enables smart manufacturing research and development. The test bed consists of a Computer-Aided Technologies (CAx) Lab and a Manufacturing Lab that interface through the product model creating a "digital thread" of information across the product lifecycle. The proposed structure and architecture of the test bed is presented, which highlights the challenges and requirements of implementing a cyber-physical infrastructure for manufacturing. The novel integration of systems across the product lifecycle also helps identify the technologies and standards needed to enable interoperability between design, fabrication, and inspection. Potential research opportunities enabled by the test bed are also discussed, such as providing publicly accessible CAx and manufacturing reference data, virtual factory data, and a representative industrial environment for creating, prototyping, and validating smart manufacturing technologies.

Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed

PubMed Central

Helu, Moneer; Hedberg, Thomas

2017-01-01

Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes a concept for a product lifecycle test bed built on a cyber-physical infrastructure that enables smart manufacturing research and development. The test bed consists of a Computer-Aided Technologies (CAx) Lab and a Manufacturing Lab that interface through the product model creating a “digital thread” of information across the product lifecycle. The proposed structure and architecture of the test bed is presented, which highlights the challenges and requirements of implementing a cyber-physical infrastructure for manufacturing. The novel integration of systems across the product lifecycle also helps identify the technologies and standards needed to enable interoperability between design, fabrication, and inspection. Potential research opportunities enabled by the test bed are also discussed, such as providing publicly accessible CAx and manufacturing reference data, virtual factory data, and a representative industrial environment for creating, prototyping, and validating smart manufacturing technologies. PMID:28664167

Development and testing of the Shenandoah collector

NASA Technical Reports Server (NTRS)

Kinoshita, G. S.

1981-01-01

The test and development of the 7-meter Shenandoah parabolic dish collector incorporating an FEK-244 film reflective surface and cavity receiver are described. Four prototypes tested in the midtemperature Solar System Test Facility indicate, with changes incorporated from these development tests, that the improvements should lead to predicted performance levels in the production collectors.

Optimization of Deep Drilling Performance--Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2003-10-01

This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2002 through September 2002. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for amore » next level of deep drilling performance; Phase 2--Develop advanced smart bit--fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. Accomplishments to date include the following: 4Q 2002--Project started; Industry Team was assembled; Kick-off meeting was held at DOE Morgantown; 1Q 2003--Engineering meeting was held at Hughes Christensen, The Woodlands Texas to prepare preliminary plans for development and testing and review equipment needs; Operators started sending information regarding their needs for deep drilling challenges and priorities for large-scale testing experimental matrix; Aramco joined the Industry Team as DEA 148 objectives paralleled the DOE project; 2Q 2003--Engineering and planning for high pressure drilling at TerraTek commenced; 3Q 2003--Continuation of engineering and design work for high pressure drilling at TerraTek; Baker Hughes INTEQ drilling Fluids and Hughes Christensen commence planning for Phase 1 testing--recommendations for bits and fluids.« less

Leadership Development Program Final Project

NASA Technical Reports Server (NTRS)

Parrish, Teresa C.

2016-01-01

TOSC is NASA's prime contractor tasked to successfully assemble, test, and launch the EM1 spacecraft. TOSC success is highly dependent on design products from the other NASA Programs manufacturing and delivering the flight hardware; Space Launch System(SLS) and Multi-Purpose Crew Vehicle(MPCV). Design products directly feed into TOSC's: Procedures, Personnel training, Hardware assembly, Software development, Integrated vehicle test and checkout, Launch. TOSC senior management recognized a significant schedule risk as these products are still being developed by the other two (2) programs; SVE and ACE positions were created.

Development and testing of cool-season grass species, varieties, and hybrids for biomass feedstock production in western North America

USDA-ARS?s Scientific Manuscript database

Development and testing of cool-season grasses is needed to improve forage production and expand the range of bioenergy feedstocks throughout western North America. Basin wildrye (Leymus cinereus) and creeping wildrye (Leymus triticoides) are native to semiarid environments of western North America...

Development of Standardized Material Testing Protocols for Prosthetic Liners

PubMed Central

Cagle, John C.; Reinhall, Per G.; Hafner, Brian J.; Sanders, Joan E.

2017-01-01

A set of protocols was created to characterize prosthetic liners across six clinically relevant material properties. Properties included compressive elasticity, shear elasticity, tensile elasticity, volumetric elasticity, coefficient of friction (CoF), and thermal conductivity. Eighteen prosthetic liners representing the diverse range of commercial products were evaluated to create test procedures that maximized repeatability, minimized error, and provided clinically meaningful results. Shear and tensile elasticity test designs were augmented with finite element analysis (FEA) to optimize specimen geometries. Results showed that because of the wide range of available liner products, the compressive elasticity and tensile elasticity tests required two test maxima; samples were tested until they met either a strain-based or a stress-based maximum, whichever was reached first. The shear and tensile elasticity tests required that no cyclic conditioning be conducted because of limited endurance of the mounting adhesive with some liner materials. The coefficient of friction test was based on dynamic coefficient of friction, as it proved to be a more reliable measurement than static coefficient of friction. The volumetric elasticity test required that air be released beneath samples in the test chamber before testing. The thermal conductivity test best reflected the clinical environment when thermal grease was omitted and when liner samples were placed under pressure consistent with load bearing conditions. The developed procedures provide a standardized approach for evaluating liner products in the prosthetics industry. Test results can be used to improve clinical selection of liners for individual patients and guide development of new liner products. PMID:28233885

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

Hagerty, J. J.

1981-01-01

Progress in the development of automated solar cell and module production is reported. The unimate robot is programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. The mechanical construction of the automated lamination station and final assembly station phases are completed and the first operational testing is underway. The final controlling program is written and optimized. The glass reinforced concrete (GRC) panels to be used for testing and deliverables are in production. Test routines are grouped together and defined to produce the final control program.

The Construction and Development of Indicators of Learning Organization at Higher Educational Institutions Emphasizing Graduate Production and Social Development

ERIC Educational Resources Information Center

Hanrin, Chanwit; Sri-Amphai, Pissamai; Ruangmontri, Karn; Namwan, Tharinthorn

2011-01-01

The Purposes of this research were to construct and develop indicators of learning organization at higher educational institutions emphasize graduate production and social development, and to test the congruence of the structural model of the indicators of learning organization at higher educational institutions emphasizing graduate production and…

48 CFR 34.103 - Testing and qualification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Developed Under Title III, Defense Production Act 34.103 Testing and qualification. (a) Contractors... or item of supply; and (2) for major systems in production, remaining quantities to be acquired are sufficient to justify incurring the cost of testing and qualification. In evaluating this request, the...

Online test application development using framework CodeIgniter

NASA Astrophysics Data System (ADS)

Wibawa, S. C.; Wahyuningsih, Y.; Sulistyowati, R.; Abidin, R.; Lestari, Y.; Noviyanti; Maulana, D. A.

2018-01-01

The purpose of this study is developing application an online test for vocational students and to know the user acceptance testing on the application. The method used in this research is the Research and Development (R & D) only up to the pilot phase of the product. The stage of the procedure of the research namely: (1) Analyze the exam using paper compared to using web-based application test online. (2) Design the media in accordance with the design of the author. (3) To test the product by including a questionnaire instrument against the application that has been done. Researchers carried out tests on class X on the computer and network engineering Vocational High School (SMK) Darul Ma’wa Plumpang. It can be concluded that: (1) application online test was created gets the value of the validator with the percentage of lowest value and the highest value for the validation of products: 25% and 100%. With a total number of 14 questions, after validation of the products obtained from the three aspects of the assessment scale from 81.25 to 100 obtained from 2 different validators with the meaning of an application that has been developed and very suitable for use in school. (2) Based on User Acceptance Testing (UAT), applications can be very well received by the students and recommend to replay the final semester and others. With the successful acquisition of a category which means it’s ready and qualified.

Vacuum decay container closure integrity leak test method development and validation for a lyophilized product-package system.

PubMed

Patel, Jayshree; Mulhall, Brian; Wolf, Heinz; Klohr, Steven; Guazzo, Dana Morton

2011-01-01

A leak test performed according to ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method was developed and validated for container-closure integrity verification of a lyophilized product in a parenteral vial package system. This nondestructive leak test method is intended for use in manufacturing as an in-process package integrity check, and for testing product stored on stability in lieu of sterility tests. Method development and optimization challenge studies incorporated artificially defective packages representing a range of glass vial wall and sealing surface defects, as well as various elastomeric stopper defects. Method validation required 3 days of random-order replicate testing of a test sample population of negative-control, no-defect packages and positive-control, with-defect packages. Positive-control packages were prepared using vials each with a single hole laser-drilled through the glass vial wall. Hole creation and hole size certification was performed by Lenox Laser. Validation study results successfully demonstrated the vacuum decay leak test method's ability to accurately and reliably detect those packages with laser-drilled holes greater than or equal to approximately 5 μm in nominal diameter. All development and validation studies were performed at Whitehouse Analytical Laboratories in Whitehouse, NJ, under the direction of consultant Dana Guazzo of RxPax, LLC, using a VeriPac 455 Micro Leak Test System by Packaging Technologies & Inspection (Tuckahoe, NY). Bristol Myers Squibb (New Brunswick, NJ) fully subsidized all work. A leak test performed according to ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method was developed and validated to detect defects in stoppered vial packages containing lyophilized product for injection. This nondestructive leak test method is intended for use in manufacturing as an in-process package integrity check, and for testing product stored on stability in lieu of sterility tests. Test method validation study results proved the method capable of detecting holes laser-drilled through the glass vial wall greater than or equal to 5 μm in nominal diameter. Total test time is less than 1 min per package. All method development and validation studies were performed at Whitehouse Analytical Laboratories in Whitehouse, NJ, under the direction of consultant Dana Guazzo of RxPax, LLC, using a VeriPac 455 Micro Leak Test System by Packaging Technologies & Inspection (Tuckahoe, NY). Bristol Myers Squibb (New Brunswick, NJ) fully subsidized all work.

Architecture-Based Unit Testing of the Flight Software Product Line

NASA Technical Reports Server (NTRS)

Ganesan, Dharmalingam; Lindvall, Mikael; McComas, David; Bartholomew, Maureen; Slegel, Steve; Medina, Barbara

2010-01-01

This paper presents an analysis of the unit testing approach developed and used by the Core Flight Software (CFS) product line team at the NASA GSFC. The goal of the analysis is to understand, review, and reconunend strategies for improving the existing unit testing infrastructure as well as to capture lessons learned and best practices that can be used by other product line teams for their unit testing. The CFS unit testing framework is designed and implemented as a set of variation points, and thus testing support is built into the product line architecture. The analysis found that the CFS unit testing approach has many practical and good solutions that are worth considering when deciding how to design the testing architecture for a product line, which are documented in this paper along with some suggested innprovennents.

Beneficial uses of space

NASA Technical Reports Server (NTRS)

Bloom, H. L.

1977-01-01

The study elicited over 100 ideas for Space Processing. Of the elicited ideas, more than 20% involved processing of biologicals, or related medical and life sciences applications. Among these were High Purity Separation of Isoenzymes, and Development of Biorhythms applications data. Program planning for four products is outlined. Experimentation and testing resulted in definition of nearly 70 series of tests in ground-based laboratories, sounding rockets, etc., and space shuttle. Development schedules established timing and interrelationships of decisions involved in carrying these products to the point of production. The potential profitability of the four products is determined. Resources needed to achieve full scale production included use of shuttle for transportation, for which cost apportionment model was developed. R and D resources for the four products totalled $46,000,000 with Isoenzymes requiring the smallest expenditure, $4,000,000. A computerized profitability model (INVEST) was used to determine the measures of profitability of each product. Results build confidence that there will be a payoff.

Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

Implementation effect of productive 4-stage field orientation on the student technopreneur skill in vocational schools

NASA Astrophysics Data System (ADS)

Ismail, Edy; Samsudi, Widjanarko, Dwi; Joyce, Peter; Stearns, Roman

2018-03-01

This model integrates project base learning by creating a product based on environmental needs. The Produktif Orientasi Lapangan 4 Tahap (POL4T) combines technical skills and entrepreneurial elements together in the learning process. This study is to implement the result of technopreneurship learning model development which is environment-oriented by combining technology and entrepreneurship components on Machining Skill Program. This study applies research and development design by optimizing experimental subject. Data were obtained from questionnaires, learning material validation, interpersonal, intrapersonal observation forms, skills, product, teachers and students' responses, and cognitive tasks. Expert validation and t-test calculation are applied to see how effective POL4T learning model. The result of the study is in the form of 4 steps learning model to enhance interpersonal and intrapersonal attitudes, develop practical products which orient to society and appropriate technology so that the products can have high selling value. The model is effective based on the students' post test result, which is better than the pre-test. The product obtained from POL4T model is proven to be better than the productive learning. POL4T model is recommended to be implemented for XI grade students. This is can develop entrepreneurial attitudes that are environment oriented, community needs and technical competencies students.

A recent Cleanroom success story: The Redwing project

NASA Technical Reports Server (NTRS)

Hausler, Philip A.

1992-01-01

Redwing is the largest completed Cleanroom software engineering project in IBM, both in terms of lines of code and project staffing. The product provides a decision-support facility that utilizes artificial intelligence (AI) technology for predicting and preventing complex operating problems in an MVS environment. The project used the Cleanroom process for development and realized a defect rate of 2.6 errors/KLOC, measured from first execution. This represents the total amount of errors that were found in testing and installation at three field test sites. Development productivity was 486 LOC/PM, which included all development labor expended in design specification through completion of incremental testing. In short, the Redwing team produced a complex systems software product with an extraordinarily low error rate, while maintaining high productivity. All of this was accomplished by a project team using Cleanroom for the first time. An 'introductory implementation' of Cleanroom was defined and used on Redwing. This paper describes the quality and productivity results, the Redwing project, and how Cleanroom was implemented.

Standard software for automated testing of infrared imagers, IRWindows, in practical applications

NASA Astrophysics Data System (ADS)

Irwin, Alan; Nicklin, Robert L.

1998-08-01

In the past, ad-hoc and manual testing of infrared images hasn't been a deterrent to the characterization of these systems due to the low volume of production and high ratio of skilled personnel to the quantity of units under test. However, with higher volume production, increasing numbers of development labs in emerging markets, and the push towards less expensive, faster development cycles, there is a strong need for standardized testing that is quickly configurable by test engineers, which can be run by less experienced test technicians, and which produce repeatable, accurate results. The IRWindowsTM system addresses these needs using a standard computing platform and existing automated IR test equipment. This paper looks at the general capabilities of the IRWindowsTM system, and then examines the specific results from its application in the PalmIR and Automotive IR production environments.

Bubble-Good Data: Product Testing and Other Sources.

ERIC Educational Resources Information Center

Atwood, Virginia A.

1985-01-01

The goal of this mini-unit is to teach elementary students economic concepts related to consumerism and to develop problem-solving skills. Students test a product such as sugarless bubble gum and study how it is advertised. The students then make their own advertisement for the product. (RM)

OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS & HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2004-10-01

The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit-fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all major preparations for themore » high pressure drilling campaign. Baker Hughes encountered difficulties in providing additional pumping capacity before TerraTek's scheduled relocation to another facility, thus the program was delayed further to accommodate the full testing program.« less

Demonstration & Testing of ClimaStat for Improved DX Air-Conditioning Efficiency

DTIC Science & Technology

2013-04-01

impaired productivity and increased transmission of viruses and bacteria. Allowing indoor RH to rise above an average of 60%rh or a peak of 70%rh can...testing of an engineering prototype culminated in issuance of US Patent 6,427,454 in 2002. Then, development, testing and refinement of a production ...field tests on four Trane (American Standard) systems at a university site were concluded in 2009. A production prototype was constructed based on

The use and interpretation of in vitro data in regulatory toxicology: cosmetics, toiletries and household products.

PubMed

Indans, Ian

2002-02-28

There is currently a drive to eliminate animal testing for cosmetics, toiletries and household products; indeed, the European Union Cosmetics Directive aims to prohibit the use of experimental animals for the testing of finished cosmetic products after 2002. At present, national prohibitions are in place in the UK, Germany, Austria and the Netherlands, for the testing of finished cosmetic products and cosmetic ingredients. In the USA animal testing for certain types of finished products is mandatory. Against this background, the currently available regulatory in vitro tests comprise methods for eye irritation, skin corrosivity, genotoxicity, dermal penetration and photoirritation. The draft updates to the Organisation for Economic Co-operation and Development guidelines for eye and skin irritation advocate the use of in vitro or ex vivo methods prior to the commencement of animal studies. At present, testing for these endpoints cannot be completed in vitro, but potentially corrosive substances and products can be classified without the need for animal studies. Regulatory genotoxicity testing can be completed using only in vitro methods, provided that a clear negative outcome is obtained for each test. Data from dermal penetration studies may be used to refine risk assessments. Current developments in areas such as skin sensitisation and skin irritation promise that in the reasonably near future such information may be generated without the use of animals.

Development and Testing of the AMEGO Silicon Tracker System

NASA Astrophysics Data System (ADS)

Griffin, Sean; Amego Team

2018-01-01

The All-sky Medium Energy Gamma-ray Observatory (AMEGO) is a probe-class mission in consideration for the 2020 decadal review designed to operate at energies from ˜ 200 keV to > 10 GeV. Operating a detector in this energy regime is challenging due to the crossover in the interaction cross-section for Compton scattering and pair production. AMEGO is made of four major subsystems: a plastic anticoincidence detector for rejecting cosmic-ray events, a silicon tracker for measuring the energies of Compton scattered electrons and pair-production products, a CZT calorimeter for measuring the energy and location of Compton scattered photons, and a CsI calorimeter for measuring the energy of the pair-production products at high energies. The tracker comprises layers of dual-sided silicon strip detectors which provide energy and localization information for Compton scattering and pair-production events. A prototype tracker system is under development at GSFC; in this contribution we provide details on the verification, packaging, and testing of the prototype tracker, as well as present plans for the development of the front-end electronics, beam tests, and a balloon flight.

Software error data collection and categorization

NASA Technical Reports Server (NTRS)

Ostrand, T. J.; Weyuker, E. J.

1982-01-01

Software errors detected during development of an interactive special purpose editor system were studied. This product was followed during nine months of coding, unit testing, function testing, and system testing. A new error categorization scheme was developed.

Micro Autonomous Systems Research: Systems Engineering Processes for Micro Autonomous Systems

DTIC Science & Technology

2016-11-01

product family design and reconfigurable system design with recent developments in the fields of automated manufacturing and micro-autonomous...mapped to design parameters. These mappings are the mechanism by which physical product designs are formulated. Finally, manufacture of the product ... design tools and manufacturing and testing the resulting design . The final products were inspected and flight tested so that their

Developing product quality standards for wheelchairs used in less-resourced environments

PubMed Central

McCambridge, Matt; Reese, Norman; Schoendorfer, Don; Wunderlich, Eric; Rushman, Chris; Mahilo, Dave

2017-01-01

Background Premature failures of wheelchairs in less-resourced environments (LREs) may be because of shortcomings in product regulation and quality standards. The standards published by the International Organization for Standardization (ISO) specify wheelchair tests for durability, safety and performance, but their applicability to products used in the rugged conditions of LREs is unclear. Because of this, wheelchair-related guidelines published by the World Health Organization recommended developing more rigorous durability tests for wheelchairs. Objectives This study was performed to identify the additional tests needed for LREs. Methods First, a literature review of the development of ISO test standards, wheelchair standards testing studies and wheelchair evaluations in LREs was performed. Second, expert advice from members of the Standards Working Group of the International Society of Wheelchair Professionals (ISWP) was compiled and reviewed. Results A total of 35 articles were included in the literature review. Participation from LREs was not observed in the ISO standards development. As per wheelchair testing study evidence, wheelchair models delivered in LREs did not meet the minimum standards requirement. Multiple part failures and repairs were observed with reviewed field evaluation studies. ISWP experts noted that several testing factors responsible for premature failures with wheelchair parts are not included in the standards and accordingly provided advice for additional test development. Conclusion The study findings indicate the need to develop a wide range of tests, with specific tests for measuring corrosion resistance of the entire wheelchair, rolling resistance of castors and rear wheels, and durability of whole wheelchair and castor assemblies. PMID:28936410

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speer, B.; Mendelsohn, M.; Cory, K.

Insuring solar photovoltaic (PV) systems poses certain challenges. Insurance premiums, which can represent a significant part of overall costs for PV developers, can affect market competition. The market for certain types of insurance products is limited. Historical loss data is lacking, and test data for the long-term viability of PV products under real-life conditions is limited. Insurers' knowledge about PV systems and the PV industry is uneven even as the industry introduces innovative contractual structures and business models. Interviews conducted for this report with PV project developers, insurance brokers, and underwriters suggest government actions aimed at better testing, data collection,more » and communication could facilitate the development of a market for PV insurance products. This report identifies actions by governments, national laboratories, and other stakeholders that could accelerate the development of insurance products in support PV systems. Such actions include: increasing understanding of the solar PV industry among insurance professionals; expanding the availability of PV historical loss data; evaluating the expansion of renewable energy business classification; developing module and component testing capabilities and services offered by federal labs; and, advancing industry standards for PV system installers.« less

Automatic test comes to focal plane array production

NASA Astrophysics Data System (ADS)

Skaggs, Frank L.; Barton, T. D.

1992-08-01

To meet the needs of military and commercial markets, the infrared focal plane array industry must develop new, effective and low cost methods of fabricating and testing imaging detectors. This paper describes Texas Instruments new concepts in automated testing and cold probe technology as they apply to volume production.

Microgravity: New opportunities to facilitate biotechnology development

NASA Astrophysics Data System (ADS)

Johnson, Terry; Todd, Paul; Stodieck, Louis S.

1996-03-01

New opportunities exist to use the microgravity environment to facilitate biotechnology development. BioServe Space Technologies Center for the Commercial Development of Space offers access to microgravity environments for companies who wish to perform research or develop products in three specific life-science fields: Biomedical and Pharmaceutical Research, Biotechnology and Bioprocessing Research, and Agricultural and Environmental Research. Examples of each include physiological testing of new pharmaceutical countermeasures against symptoms that are exaggerated in space flight, crystallization and testing of novel, precompetitive biopharmaceutical substances in a convection-free environment, and closed life-support system product development.

Safety and efficacy of personal care products containing colloidal oatmeal.

PubMed

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized. In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions) by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin. We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation. Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period.

Safety and efficacy of personal care products containing colloidal oatmeal

PubMed Central

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Background Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized. Methods In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions) by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin. Results We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation. Conclusion Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period. PMID:23204849

Development of advanced test methods for the improvement of production standards for ceramic powders used in solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Ward, Brian

Solid oxide fuel cells (SOFCs) are energy conversion devices that use ceramic powders as a precursor material for their electrodes. Presently, powder manufacturers are encountering complications producing consistent precursor powders. Through various thermal, chemical and physical tests, such as DSC and XRD, a preliminary production standard will be developed.

Breadboard Facility

NASA Technical Reports Server (NTRS)

1977-01-01

In the sixties, Chrysler was NASA's prime contractor for the Saturn I and IB test launch vehicles. The company installed and operated at Huntsville what was known as the Saturn I/IB Development Breadboard Facility. "Breadboard," means an array of electrical and electronic equipment for performing a variety of development and test functions. This work gave Chrysler a broad capability in computerized testing to assure quality control in development of solid-state electronic systems. Today that division is manufacturing many products not destined for NASA, most of them being associated with the company's automotive line. A major project is production and quality-control testing of the "lean-burn" engine, one that has a built-in Computer to control emission timing, and allow the engine to run on a leaner mixture of fuel and air. Other environment-related products include vehicle emission analyzers. The newest of the line is an accurate, portable solid state instrument for testing auto exhaust gases. The exhaust analyzers, now being produced for company dealers and for service

Environmental Assessment of the Hawaii Geothermal Project Well Flow Test Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1976-11-01

The Hawaii Geothermal Project, a coordinated research effort of the University of Hawaii, funded by the County and State of Hawaii, and ERDA, was initiated in 1973 in an effort to identify, generate, and use geothermal energy on the Big Island of Hawaii. A number of stages are involved in developing geothermal power resources: exploration, test drilling, production testing, field development, power plant and powerline construction, and full-scale production. Phase I of the Project, which began in the summer of 1973, involved conducting exploratory surveys, developing analytical models for interpretation of geophysical results, conducting studies on energy recovery from hotmore » brine, and examining the legal and economic implications of developing geothermal resources in the state. Phase II of the Project, initiated in the summer of 1975, centers on drilling an exploratory research well on the Island of Hawaii, but also continues operational support for the geophysical, engineering, and socioeconomic activities delineated above. The project to date is between the test drilling and production testing phase. The purpose of this assessment is to describe the activities and potential impacts associated with extensive well flow testing to be completed during Phase II.« less

Tests of wildlife habitat models to evaluate oak-mast production

USGS Publications Warehouse

Schroeder, R.L.; Vangilder, L.D.

1997-01-01

We measured oak-mast production and forest structure and composition in the Ozark Mountains of Missouri and tested the accuracy of oak-mast prediction variables from 5 Habitat Suitability Index (HSI) species models. Acorn production was positively associated with several measures of abundance and canopy cover of oak trees, and with an index of mast production for all 5 HSI models. We developed 2 modified oak-mast models, based on inputs related to either oak tree density or oak canopy cover and diversity of oak tree species. The revised models accounted for 22-32% of the variance associated with acorn abundance. Future tests of HSI models should consider: (1) the concept of upper limits imposed by habitat and the effects of nonhabitat factors; (2) the benefits of a top-down approach to model development; and (3) testing models across broad geographic regions.

Resources for the Implementation of a Productivity Analysis in Education.

ERIC Educational Resources Information Center

Salter, Ruth

One of the most critical elements in the adaptation of productivity analysis to education is the adequacy of the instruments for measuring program output or achievement. Various aspects of standardized test construction make them less than desirable measures of productivity. The Test Development Notebook which the New York State Department of…

Development and Justification of a Risk Evaluation Matrix To Guide Chemical Testing Necessary To Select and Qualify Plastic Components Used in Production Systems for Pharmaceutical Products.

PubMed

Jenke, Dennis

2015-01-01

An accelerating trend in the pharmaceutical industry is the use of plastic components in systems used to produce an active pharmaceutical ingredient or a finished drug product. If the active pharmaceutical ingredient, the finished drug product, or any solution used to generate them (for example, a process stream such as media, buffers, eluents, and the like) is contacted by a plastic component at any time during the production process, substances leached from the component may accumulate in the active pharmaceutical ingredient or finished drug product, affecting its safety and/or efficacy. In this article the author develops and justifies a semi-quantitative risk evaluation matrix that is used to determine the amount and rigor of component testing necessary and appropriate to establish that the component is chemically suitable for its intended use. By considering key properties of the component, the contact medium, the contact conditions, and the active pharmaceutical ingredient's or finished drug product's clinical conditions of use, use of the risk evaluation matrix produces a risk score whose magnitude reflects the accumulated risk that the component will interact with the contact solution to such an extent that component-related extractables will accumulate in the active pharmaceutical ingredient or finished drug product as leachables at levels sufficiently high to adversely affect user safety. The magnitude of the risk score establishes the amount and rigor of the testing that is required to select and qualify the component, and such testing is broadly grouped into three categories: baseline assessment, general testing, and full testing (extractables profiling). Production suites used to generate pharmaceuticals can include plastic components. It is possible that substances in the components could leach into manufacturing solutions and accumulate in the pharmaceutical product. In this article the author develops and justifies a semi-quantitative risk evaluation matrix that can be used to determine the amount and rigor of component testing that may be necessary and appropriate to establish that the component is suitable for its intended use. Use of the risk evaluation matrix allows a user of a component to determine the type and amount of testing that should be performed to establish the patient safety risk associated with using that component in order to manufacture an active pharmaceutical ingredient or a finished drug product. © PDA, Inc. 2015.

Conference on abuse liability and appeal of tobacco products: conclusions and recommendations.

PubMed

Henningfield, Jack E; Hatsukami, Dorothy K; Zeller, Mitch; Peters, Ellen

2011-07-01

The rate of initiation and progression to dependence and premature mortality are higher for tobacco products than for any other dependence producing substance. This is not explained simply by the addictiveness ("abuse liability") or by enticing product designs ("product appeal") alone, but rather by both of these factors in combination with marketing and social influences that also influence "product appeal". A working meeting of leading experts in abuse liability (AL) and product appeal was convened to examine how these disciplines could be more effectively applied to the evaluation of tobacco products for the purposes of regulation that would include setting standards for designs and contents intended to reduce the risk of initiation and dependence. It was concluded that abuse liability assessment (ALA) is a validated approach to testing pharmaceutical products but has not been extensively applied to tobacco products: such application has demonstrated feasibility, but special challenges include the diverse range of products, product complexity, and the absence of satisfactory placebo products. Consumer testing for product appeal is widely used by consumer product marketers as well as by researchers in their efforts to understand consumer product preferences and use but has not been extensively applied to tobacco products except by the tobacco industry. Recommendations for testing, methods development, and research were developed. A major recommendation was that tobacco products should be tested for AL and product appeal, and the results integrated and evaluated so as to more accurately predict risk of initiation, dependence, and persistence of use. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Conference on Abuse Liability and Appeal of Tobacco Products: Conclusions and Recommendations*

PubMed Central

Hatsukami, Dorothy K.; Zeller, Mitch; Peters, Ellen

2011-01-01

The rate of initiation and progression to dependence and premature mortality are higher for tobacco products than for any other dependence producing substance. This is not explained simply by the addictiveness (“abuse liability”) or by enticing product designs (“product appeal”) alone, but rather by both of these factors in combination with marketing and social influences that also influence “product appeal”. A working meeting of leading experts in abuse liability (AL) and product appeal was convened to examine how these disciplines could be more effectively applied to the evaluation of tobacco products for the purposes of regulation that would include setting standards for designs and contents intended to reduce the risk of initiation and dependence. It was concluded that abuse liability assessment (ALA) is a validated approach to testing pharmaceutical products but has not been extensively applied to tobacco products: such application has demonstrated feasibility, but special challenges include the diverse range of products, product complexity, and the absence of satisfactory placebo products. Consumer testing for product appeal is widely used by consumer products marketers as well as by researchers in their efforts to understand consumer product preferences and use but has not been extensively applied to tobacco products except by the tobacco industry. Recommendations for testing, methods development, and research were developed. A major recommendation was that tobacco products should be tested for AL and product appeal, and the results integrated and evaluated so as to more accurately predict risk of initiation, dependence, and persistence of use. PMID:21376479

Comparative in vitro anti-tick efficacy of commercially available products and newly developed phyto-formulations against field collected and resistant tick lines of Rhipicephalus (Boophilus) microplus.

PubMed

Ajith Kumar, K G; Sharma, Anil Kumar; Kumar, Sachin; Ray, D D; Rawat, A K S; Srivastava, Sharad; Ghosh, Srikant

2016-12-01

Rhipicephalus ( Boophilus ) microplus is considered as one of the most widely distributed tick species ecto-parasitizing on livestock and causes fatal diseases with significant production loss. To address the problem of controlling acaricide resistant tick infestations on animals, attention has been paid to develop eco-friendly phyto-acaricides. The present study was undertaken to evaluate the comparative anti-tick activities of commercially available herbal and chemical products with chemically characterized phyto-formulations developed recently against field ticks and resistant tick lines of R. ( B. ) microplus . The chemical product Butox ® Vet was found nearly passive against all the tested resistant tick lines. However, one of the commercial polyherbal product, Zerokeet ® showed an efficacy (E%) of 41.8-75.4 % ([Formula: see text]) using recommended dilution (1:2) against field ticks and resistant tick lines. However, the other commercial product, Erina ® EP has very limited efficacy against all the tested tick. In comparison, the newly developed phyto-formulation, NBA/13/B/2 and NAC-01 conferred an E% of 82.4-91.3 % ([Formula: see text]) and 62.3-94.6 % ([Formula: see text]), respectively, against tested resistant ticks. Results indicated higher marketing potentiality of newly developed formulation in the existing tick problem scenario.

Plant-based insect repellents: a review of their efficacy, development and testing

PubMed Central

2011-01-01

Plant-based repellents have been used for generations in traditional practice as a personal protection measure against host-seeking mosquitoes. Knowledge on traditional repellent plants obtained through ethnobotanical studies is a valuable resource for the development of new natural products. Recently, commercial repellent products containing plant-based ingredients have gained increasing popularity among consumers, as these are commonly perceived as “safe” in comparison to long-established synthetic repellents although this is sometimes a misconception. To date insufficient studies have followed standard WHO Pesticide Evaluation Scheme guidelines for repellent testing. There is a need for further standardized studies in order to better evaluate repellent compounds and develop new products that offer high repellency as well as good consumer safety. This paper presents a summary of recent information on testing, efficacy and safety of plant-based repellents as well as promising new developments in the field. PMID:21411012

Developing a modified preservative efficacy testing approach as a predictive tool for the evaluation of preservative systems in liquid home care products under variable test conditions.

PubMed

Hoyt, Anne L; Bushman, Don; Lewis, Nathan; Faber, Robert

2012-01-01

How can a formulator have confidence that a preservative system will perform as expected under adverse conditions? Extreme conditions that can lead to the development of "off odors" in the product can be a serious challenge for companies providing home care products in the global market. Formulation and stability testing occur under controlled parameters that simulate limited environmental conditions and microbial challenges are typically performed with a standard inoculum level. While this is an acceptable and dependable process, it does not necessarily assess how well a preservative system can perform under extreme environmental conditions or against unusually high levels of bacterial challenges. This is especially true when formulations are diluted and stored by the end-user. By modifying microbial challenge testing of a liquid dishwashing product to include unexpected dilution schemes, increased microbial assaults, and elevated temperatures, a pattern of preservative efficacy was established. The resulting approach proved to be a useful tool when developing use directions, recommended dilution levels, the overall surfactant system, preservative type, and storage restrictions.

Test Driven Development of Scientific Models

NASA Technical Reports Server (NTRS)

Clune, Thomas L.

2012-01-01

Test-Driven Development (TDD) is a software development process that promises many advantages for developer productivity and has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices. Of course, scientific/technical software differs from other software categories in a number of important respects, but I nonetheless believe that TDD is quite applicable to the development of such software and has the potential to significantly improve programmer productivity and code quality within the scientific community. After a detailed introduction to TDD, I will present the experience within the Software Systems Support Office (SSSO) in applying the technique to various scientific applications. This discussion will emphasize the various direct and indirect benefits as well as some of the difficulties and limitations of the methodology. I will conclude with a brief description of pFUnit, a unit testing framework I co-developed to support test-driven development of parallel Fortran applications.

Trends in liability affecting technical writers

NASA Technical Reports Server (NTRS)

Driskill, L. P.

1981-01-01

Liability of technical writers for defective products is explored. Documents generated during a product's life cycle (including design memos, design tests, clinical trials, trial use reports, letters, and proposals) become relevant because they are likely to become the only available means of showing that the product was not defectively designed. These documents become the evidence that the product underwent balanced and well considered planning, development, testing, quality control, and field testing. The predicted increased involvement of technical writers in the prevention and defense of product liability claims is cited in view of a greater number of cases turning on "failure to warn".

Prototype Testing in Instructional Development. SWRL Working Papers: 1972.

ERIC Educational Resources Information Center

Niedermeyer, Fred C., Ed.

When properly implemented, prototype testing appears to provide one of the most direct and economical methods for identifying means to optimize the effectiveness of a product, and ultimately to validate a product's effect. The nine papers in this volume exemplify several categories of protytype testing conducted at different stages of the…

40 Years of AEDC Development, Evolution and Application of Numerical Simulations for Integrated Test and Evaluation of Turbine Engine Turbomachinery Operability Issues

DTIC Science & Technology

2010-03-01

distribution is unlimited.  Provide pretest prediction and posttest assessment of aircraft test matrix to optimize wind tunnel inlet testing...Development of Production Simulations ........................................................... 417 A.4 Research and Development Activities...174 Figure 3.175 Two-Stage HTSC as Tested at the Compressor Research Facility [3.125] ........ 174

Systematic development of technical textiles

NASA Astrophysics Data System (ADS)

Beer, M.; Schrank, V.; Gloy, Y.-S.; Gries, T.

2016-07-01

Technical textiles are used in various fields of applications, ranging from small scale (e.g. medical applications) to large scale products (e.g. aerospace applications). The development of new products is often complex and time consuming, due to multiple interacting parameters. These interacting parameters are production process related and also a result of the textile structure and used material. A huge number of iteration steps are necessary to adjust the process parameter to finalize the new fabric structure. A design method is developed to support the systematic development of technical textiles and to reduce iteration steps. The design method is subdivided into six steps, starting from the identification of the requirements. The fabric characteristics vary depending on the field of application. If possible, benchmarks are tested. A suitable fabric production technology needs to be selected. The aim of the method is to support a development team within the technology selection without restricting the textile developer. After a suitable technology is selected, the transformation and correlation between input and output parameters follows. This generates the information for the production of the structure. Afterwards, the first prototype can be produced and tested. The resulting characteristics are compared with the initial product requirements.

Full-scale testing, production and cost analysis data for the advanced composite stabilizer for Boeing 737 aircraft, volume 2

NASA Technical Reports Server (NTRS)

Aniversario, R. B.; Harvey, S. T.; Mccarty, J. E.; Parson, J. T.; Peterson, D. C.; Pritchett, L. D.; Wilson, D. R.; Wogulis, E. R.

1982-01-01

The development, testing, production activities, and associated costs that were required to produce five-and-one-half advanced-composite stabilizer shipsets for Boeing 737 aircraft are defined and discussed.

Assuring long-term reliability of concentrator PV systems

NASA Astrophysics Data System (ADS)

McConnell, R.; Garboushian, V.; Brown, J.; Crawford, C.; Darban, K.; Dutra, D.; Geer, S.; Ghassemian, V.; Gordon, R.; Kinsey, G.; Stone, K.; Turner, G.

2009-08-01

Concentrator PV (CPV) systems have attracted significant interest because these systems incorporate the world's highest efficiency solar cells and they are targeting the lowest cost production of solar electricity for the world's utility markets. Because these systems are just entering solar markets, manufacturers and customers need to assure their reliability for many years of operation. There are three general approaches for assuring CPV reliability: 1) field testing and development over many years leading to improved product designs, 2) testing to internationally accepted qualification standards (especially for new products) and 3) extended reliability tests to identify critical weaknesses in a new component or design. Amonix has been a pioneer in all three of these approaches. Amonix has an internal library of field failure data spanning over 15 years that serves as the basis for its seven generations of CPV systems. An Amonix product served as the test CPV module for the development of the world's first qualification standard completed in March 2001. Amonix staff has served on international standards development committees, such as the International Electrotechnical Commission (IEC), in support of developing CPV standards needed in today's rapidly expanding solar markets. Recently Amonix employed extended reliability test procedures to assure reliability of multijunction solar cell operation in its seventh generation high concentration PV system. This paper will discuss how these three approaches have all contributed to assuring reliability of the Amonix systems.

Heart of the Hearth: Making the Popular Clean, Not the Clean Popular - Technology Research, Development, and Tools for Clean Biomass Cookstoves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gist, Ryan

This technical report summarizes the work completed by BioLite in fulfilment of the US DOE EERE award. The work plan focused on three key objectives: developing an optimized combustion system that demonstrates high combustion efficiency and low PM 2.5 and CO emissions, integrate the system into popular stove phenotypes – side-fed rocket stove architecture like the BioLite HomeStove, and the Patsari chimney stove in Mexico such that they maintain their important phenotypical characteristics, independently evaluate quantitative fuel and emissions performance of the integrated ‘Turbo-Patsari’ in Mexican households. The project activities were organized into six major tasks: A. Develop, fabricate, andmore » test proof-of-concept prototypes B. Develop field prototypes, assess user feedback and field performance C. Define revised stove design for pre-production model, Identify manufacturing requirements and estimated cost to build, Conduct reliability, emissions, and performance testing of pre-production Turbo-Patsari D. Build pre-production Turbo-Patsari stove combustion cores E. Conduct pre-production field trials F. Summarize field trial results and evaluate Turbo-Patsari for potential volume production. A two-pronged approach was adopted for the above tasks. The first involved building a modular test platform that allowed parametric variation of multiple stove design parameters that directly affect its performance – heat output, thermal efficiency, and emissions. The second part of the approach comprised of building a surrogate Patsari based on GIRA’s specifications that could then be modified or retrofitted for optimum performance based on the learnings from the modular test platform. The following sections of the report will describe the findings of tests on these platform, the subsequent development, design, and installation of the Turbo-Patsari, and finally the in-home field trial.« less

Application of separate pressure test in oilfield development

NASA Astrophysics Data System (ADS)

Jingjun, Guo

2018-06-01

Based on the analysis of separate pressure testing data of injection wells and the actual situations of oilfield development, this paper discusses several application examples of these testing data in evaluating the effect of reservoir development, optimizating injection wells scheme adjustment, guiding oil and water wells to increase production and injection and preventing casing damage.

LST CGM Generator and Viewer Final Report CRADA No. TSB-1558-98

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vickers, Don; Larson, Don

The purpose of this project was to jointly develop and test a software plug-in that would convert native Pro /ENGINEER digital engineering drawings to Computer Graphics Metafile (CGM) format. If it was not feasible to convert the Pro/ENGINEER files, we planned to develop and test a similar conversion of native AutoCAD engineering drawings to CGM. CGM viewer plug-ins were developed as needed. There were four main tasks in this project: 1. Requirements for CGM Plug-in 2. Product Evaluation 3. Product Development Feasibility Study 4. Developing a "Plug-In" Application.

Results of SEI Independent Research and Development Projects

DTIC Science & Technology

2008-12-01

contained there. When laptops with a dual-core processor came out, ITunes fails crashed. ITunes was designed as multi-threaded application, but until...involving product portfolio, in-bound technical marketing, research and development, product engineering, supply chain, and out-bound sales and marketing...of quality and process improvement professionals to the marketing, product engineering, supply chain, product test and sales professionals. 3

Design for Health and Well Being: Knitted Products for Diabetics

NASA Astrophysics Data System (ADS)

Gault, A.

2016-07-01

This paper will discuss the design development, manufacturing and testing of knitted products maximizing the use of new innovations in Nano- technology and the integration of Phase Changing Materials specifically for diabetics. The project identified key aspects requiring design solutions to bring improvement to the circulatory problems with specific reference to the diabetic condition. Diabetics have particular difficulty in regulating their body temperature and this can result in the condition worsening, and resulting in loss of digits or limbs. The design of products to prevent the deterioration of the diabetic condition and to help those with limb loss was developed in collaboration with a Northern Ireland diabetic consultant, a product engineer and a knitwear designer. The fusion of ideas between the stakeholders resulted in the development and manufacture of a range of products that have been successfully tested at the yarn and fabric development stage and have been proven to maintain body temperature by either cooling or warming and therefore bring improvement to health and well-being. Whilst the product has a performance element the design ideas created desirable products that not only provided solutions to the brief but also resulted in products that had further market applications.

Evaluation of disconnect boxes and signal heads for hurricane resistance.

DOT National Transportation Integrated Search

2013-05-01

The objectives of this project were to quantify the maximum load requirements for disconnect boxes and signal heads and to develop test methods for product testing. Test programs for both flexure and tension were developed with the goal of producing ...

Contingency Contracting Officer Proficiency Assessment Test Development for Construction, Architect-Engineer, and Contingency Contracting

DTIC Science & Technology

2013-03-01

of written questions and answers to the USACE upon completion of test production . E. POTENTIAL BENEFITS The use of a proficiency test by the USACE...the USACE, the sponsoring agency, to determine an end- product deliverable that would assist the agency with its mission needs. Because this project...as well as the production of and feedback from 11 the pilot PAT. In Chapter V, the researchers summarize the project and present the conclusion

47 CFR 7.7 - Product design, development, and evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot demonstrations, and product trials are...

47 CFR 7.7 - Product design, development, and evaluation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot demonstrations, and product trials are...

Development of Special Biological Products

DTIC Science & Technology

1981-01-01

Rocky Mountain Spotted Fever (RMSF) 20. Continued B. Tissue Culture / ?Two production lots of FRhL-2 dnd three of MRC-5 were stabilized...104) was potency tested. J. Q Fever Vaccine Storage Stability Potency Testing Q fever vaccine (NDBR 105) was put on potency test. K. Rocky Mountain Spotted Fever (RMSF...Fever Vaccine Storage Stability Potency Testing Two lots of Q fever vaccine (NDBR 105) were put on potency test. K. Rocky Mountain Spotted Fever

Validation of laboratory-scale recycling test method of paper PSA label products

Treesearch

Carl Houtman; Karen Scallon; Richard Oldack

2008-01-01

Starting with test methods and a specification developed by the U.S. Postal Service (USPS) Environmentally Benign Pressure Sensitive Adhesive Postage Stamp Program, a laboratory-scale test method and a specification were developed and validated for pressure-sensitive adhesive labels, By comparing results from this new test method and pilot-scale tests, which have been...

The Development of Testing Methods for Characterizing Emissions and Sources of Exposures from Polyurethane Products

EPA Science Inventory

The relationship between onsite manufacture of spray polyurethane foam insulation (SPFI) and potential exposures is not well understood. Currently, no comprehensive standard test methods exist for characterizing and quantifying product emissions. Exposures to diisocyanate compoun...

Applying innovative approach “Nature of Science (NoS) within inquiry” for developing scientific literacy in the student worksheet

NASA Astrophysics Data System (ADS)

Widowati, A.; Anjarsari, P.; Zuhdan, K. P.; Dita, A.

2018-03-01

The challenges of the 21st century require innovative solutions. Education must able to make an understanding of science learning that leads to the formation of scientific literacy learners. This research was conducted to produce the prototype as science worksheet based on Nature of Science (NoS) within inquiry approach and to know the effectiveness its product for developing scientific literacy. This research was the development and research design, by pointing to Four D models and Borg & Gall Model. There were 4 main phases (define, design, develop, disseminate) and additional phases (preliminary field testing, main product revision, main field testing, and operational product revision). Research subjects were students of the junior high school in Yogyakarta. The instruments used included questionnaire sheet product validation and scientific literacy test. For the validation data were analyzed descriptively. The test result was analyzed by an N-gain score. The results showed that the appropriateness of worksheet applying NoS within inquiry-based learning approach is eligible based on the assessment from excellent by experts and teachers, students’ scientific literacy can improve high category of the N-gain score at 0.71 by using student worksheet with Nature of Science (NoS) within inquiry approach.

Use of consumer insight in the new product development process in the meat sector.

PubMed

Grunert, Klaus G; Verbeke, Wim; Kügler, Jens O; Saeed, Faiza; Scholderer, Joachim

2011-11-01

Successful new product development requires input from the market throughout the product development process, from identification of opportunities via screening of ideas, development of concepts, development of physical prototypes and to launch. Drawing on work done in the EU FP6 projects PROSAFEBEEF and Q-PORKCHAINS and a Danish project, all dealing with new product development in the meat sector, it is shown how the use of consumer insight techniques can a) support the identification of market opportunities, b) make sure that technologies applied are acceptable to consumers, c) aid the selection and optimisation of new product concepts and related communication, and d) be used to test product prototypes before final launch. Copyright © 2011 Elsevier Ltd. All rights reserved.

Non-destructive testing method for determining the solvent diffusion coefficient in the porous materials products

NASA Astrophysics Data System (ADS)

Belyaev, V. P.; Mishchenko, S. V.; Belyaev, P. S.

2018-01-01

Ensuring non-destructive testing of products in industry is an urgent task. Most of the modern methods for determining the diffusion coefficient in porous materials have been developed for bodies of a given configuration and size. This leads to the need for finished products destruction to make experimental samples from them. The purpose of this study is the development of a dynamic method that allows operatively determine the diffusion coefficient in finished products from porous materials without destroying them. The method is designed to investigate the solvents diffusion coefficient in building constructions from materials having a porous structure: brick, concrete and aerated concrete, gypsum, cement, gypsum or silicate solutions, gas silicate blocks, heat insulators, etc. A mathematical model of the method is constructed. The influence of the design and measuring device operating parameters on the method accuracy is studied. The application results of the developed method for structural porous products are presented.

[Performance evaluation of a fluorescamine-HPLC method for determination of histamine in fish and fish products].

PubMed

Kikuchi, Hiroyuki; Tsutsumi, Tomoaki; Matsuda, Rieko

2012-01-01

A method for the quantification of histamine in fish and fish products using tandem solid-phase extraction and fluorescence derivatization with fluorescamine was previously developed. In this study, we improved this analytical method to develop an official test method for quantification of histamine in fish and fish products, and performed a single laboratory study to validate it. Recovery tests of histamine from fillet (Thunnus obesus), and two fish products (fish sauce and salted and dried whole big-eye sardine) that were spiked at the level of 25 and 50 µg/g for T. obesus, and 50 and 100 µg/g for the two fish products, were carried out. The recoveries of histamine from the three samples tested were 88.8-99.6% with good repeatability (1.3-2.1%) and reproducibility (2.1-4.7%). Therefore, this method is acceptable for the quantification of histamine in fish and fish products. Moreover, surveillance of histamine content in food on the market was conducted using this method, and high levels of histamine were detected in some fish products.

Use of the cytosensor microphysiometer to predict results of a 21-day cumulative irritation patch test in humans.

PubMed

Landin, Wendell E; Mun, Greg C; Nims, Raymond W; Harbell, John W

2007-09-01

The cytosensor microphysiometer (mu phi) was investigated as a rapid, relatively inexpensive test to predict performance of skin cleansing wipes on the human 21-day cumulative irritation patch test (21CIPT). It indirectly measures metabolic rate changes in L929 cells as a function of test article dose, by measuring the acidification rate in a low-buffer medium. The dose producing a 50% reduction in metabolic rate (MRD50), relative to the baseline rate, is used as a measure of toxicity. The acute toxicity of the mu phi assay can be compared to the chronic toxicity of the 21CIPT, which is based largely on the exposure of test agents to the epidermal cells, resulting in damage and penetration of the stratum corneum leading to cell toxicity. Two series of surfactant-based cleansing wipe products were tested via the mu phi assay and 21CIPT. The first series, consisting of 20 products, was used to determine a prediction model. The second series of 38 products consisted of routine product development formulas or marketed products. Comparing the results from both tests, samples with an MRD50 greater than 50 mg/ml provided a 21CIPT score consistent with a product that performs satisfactorily in the market. When the MRD50 was greater than 78 mg/ml, the 21CIPT score was usually zero. The mu phi may be more sensitive than the 21CIPT for ranking minimally irritating materials. The mu phi assay is useful as a screen for predicting the performance of a wet wipes formula on the 21CIPT, and concurrently reduces the use of animals for safety testing in a product development program for cleansing wipes.

The effect of sprout and disease control products on disease development and weight loss

USDA-ARS?s Scientific Manuscript database

The potato industry utilizes various sprout and disease control products prior to storage and/or packing. Some of these products have not been tested for interference of wound healing and whether effects observed equate to greater disease development or weight loss. The objectives of this study we...

Pre-Launch Tasks Proposed in our Contract of December 1991

NASA Technical Reports Server (NTRS)

1998-01-01

We propose, during the pre-EOS phase to: (1) develop, with other MODIS Team Members, a means of discriminating different major biome types with NDVI and other AVHRR-based data; (2) develop a simple ecosystem process model for each of these biomes, BIOME-BGC; (3) relate the seasonal trend of weekly composite NDVI to vegetation phenology and temperature limits to develop a satellite defined growing season for vegetation; and (4) define physiologically based energy to mass conversion factors for carbon and water for each biome. Our final core at-launch product will be simplified, completely satellite driven biome specific models for net primary production. We will build these biome specific satellite driven algorithms using a family of simple ecosystem process models as calibration models, collectively called BIOME-BGC, and establish coordination with an existing network of ecological study sites in order to test and validate these products. Field datasets will then be available for both BIOME-BGC development and testing, use for algorithm developments of other MODIS Team Members, and ultimately be our first test point for MODIS land vegetation products upon launch. We will use field sites from the National Science Foundation Long-Term Ecological Research network, and develop Glacier National Park as a major site for intensive validation.

Pre-Launch Tasks Proposed in our Contract of December 1991

NASA Technical Reports Server (NTRS)

Running, Steven W.; Nemani, Ramakrishna R.; Glassy, Joseph

1997-01-01

We propose, during the pre-EOS phase to: (1) develop, with other MODIS Team Members, a means of discriminating different major biome types with NDVI and other AVHRR-based data. (2) develop a simple ecosystem process model for each of these biomes, BIOME-BGC (3) relate the seasonal trend of weekly composite NDVI to vegetation phenology and temperature limits to develop a satellite defined growing season for vegetation; and (4) define physiologically based energy to mass conversion factors for carbon and water for each biome. Our final core at-launch product will be simplified, completely satellite driven biome specific models for net primary production. We will build these biome specific satellite driven algorithms using a family of simple ecosystem process models as calibration models, collectively called BIOME-BGC, and establish coordination with an existing network of ecological study sites in order to test and validate these products. Field datasets will then be available for both BIOME-BGC development and testing, use for algorithm developments of other MODIS Team Members, and ultimately be our first test point for MODIS land vegetation products upon launch. We will use field sites from the National Science Foundation Long-Term Ecological Research network, and develop Glacier National Park as a major site for intensive validation.

Green Toxicology: a strategy for sustainable chemical and material development.

PubMed

Crawford, Sarah E; Hartung, Thomas; Hollert, Henner; Mathes, Björn; van Ravenzwaay, Bennard; Steger-Hartmann, Thomas; Studer, Christoph; Krug, Harald F

2017-01-01

Green Toxicology refers to the application of predictive toxicology in the sustainable development and production of new less harmful materials and chemicals, subsequently reducing waste and exposure. Built upon the foundation of "Green Chemistry" and "Green Engineering", "Green Toxicology" aims to shape future manufacturing processes and safe synthesis of chemicals in terms of environmental and human health impacts. Being an integral part of Green Chemistry, the principles of Green Toxicology amplify the role of health-related aspects for the benefit of consumers and the environment, in addition to being economical for manufacturing companies. Due to the costly development and preparation of new materials and chemicals for market entry, it is no longer practical to ignore the safety and environmental status of new products during product development stages. However, this is only possible if toxicologists and chemists work together early on in the development of materials and chemicals to utilize safe design strategies and innovative in vitro and in silico tools. This paper discusses some of the most relevant aspects, advances and limitations of the emergence of Green Toxicology from the perspective of different industry and research groups. The integration of new testing methods and strategies in product development, testing and regulation stages are presented with examples of the application of in silico, omics and in vitro methods. Other tools for Green Toxicology, including the reduction of animal testing, alternative test methods, and read-across approaches are also discussed.

A Comparative Analysis of the Resources Required for Test and Evaluation on Army-Led Weapon System Programs, Based Upon Program Size and Acquisition Management Complexity

DTIC Science & Technology

2007-12-01

Program Manager PMO Program Manager Office POM Program Objective Memorandum PPE Personal Protective Equipment PPT Production Prove...test • Technical feasibility test • Engineering development test • Production prove-out test ( PPT ) • Software qualification test 22 • Live fire...improvement BIDS (P3I) system is equipped with a detection suite to include high volume samplers, a fluorescent particle counter/sizer, a flow

CRADA Final Report For CRADA NO. CR-12-006 [Operation and Testing of an SO 2-depolarized Electrolyzer (SDE) for the Purpose of Hydrogen and Sulfuric Acid Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Summers, W. A.; Colon-Mercado, H. R.; Steimke, J. L.

2014-02-24

Over the past several years, Savannah River National Laboratory (SRNL) has led a team of collaborators under the Department of Energy’s (DOE) nuclear hydrogen production program to develop the Hybrid Sulfur (HyS) Process. HyS is a 2-step water-splitting process consisting of high temperature decomposition of sulfuric acid to generate SO 2, followed by the electrolysis of aqueous SO 2 to generate hydrogen and sulfuric acid. The latter is fed back into the high temperature reactor. SRNL designed and built an SO 2-depolarized electrolyzer (SDE) and a test facility. Over 40 SDE’s were tested using different catalysts, membranes and other components.more » SRNL demonstrated that an SDE could be operated continuously for approximately 200 hours under certain conditions without buildup of sulfur at the SDE’s cathode, thus solving a key technical problem with SDE technology. Air Products and Chemicals, Inc. (APCI) is a major supplier of hydrogen production systems, and they have proprietary technology that could benefit from the SDE developed by SRNS, or some improved version thereof. However, to demonstrate that SRNL’s SDE is a truly viable approach to the electrolyzer design, continuous operation for far greater periods of time than 200 hours must be demonstrated, and the electrolyzer must be scaled up to greater hydrogen production capacities. SRNL and Air Products entered into a Cooperative Research and Development Agreement with the objective of demonstrating the effectiveness of the SDE for hydrogen and sulfuric acid production and to demonstrate long-term continuous operation so as to dramatically increase the confidence in the SDE design for commercial operation. SRNL prepared a detailed technical report documenting previous SDE development, including the current SDE design and operating conditions that led to the 200-hour sulfurfree testing. SRNL refurbished its single cell SDE test facility and qualified the equipment for continuous operation. A new membrane electrode assembly (MEA) was fabricated and installed in the single cell electrolyzer (60 cm 2 active cell area). Shakedown testing was conducted, and several modifications were made to the test facility equipment. Seven different MEAs were used during testing. Beginning on May 20, 2013, SRNL was able to test the SDE continuously for 1200 hours, including 1000 hours under power to generate hydrogen at an average rate of 10.8 liters per hour. The SDE was not removed or repaired during the 50-day test and was successfully restarted after each shutdown. The test was intentionally stopped after 1200 hours (1000 hours of hydrogen production) due to funding constraints. Post-test examination of the MEA using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Microanalysis (EDAX) showed no elemental sulfur deposits or sulfur layer inside the cell, thus successfully achieving the test goals. The results demonstrated that the SDE could be operated for extended periods without major performance degradation or the buildup of sulfur inside the MEA. Air Products conducted an assessment of the economic viability of the SDE based on the “as tested” design. The results indicated that the SDE faces significant economic obstacles in its current state. Further development and scale-up are necessary before the SDE is ready for commercialization.« less

Development of an agricultural biotechnology crop product: testing from discovery to commercialization.

PubMed

Privalle, Laura S; Chen, Jingwen; Clapper, Gina; Hunst, Penny; Spiegelhalter, Frank; Zhong, Cathy X

2012-10-17

"Genetically modified" (GM) or "biotech" crops have been the most rapidly adopted agricultural technology in recent years. The development of a GM crop encompasses trait identification, gene isolation, plant cell transformation, plant regeneration, efficacy evaluation, commercial event identification, safety evaluation, and finally commercial authorization. This is a lengthy, complex, and resource-intensive process. Crops produced through biotechnology are the most highly studied food or food component consumed. Before commercialization, these products are shown to be as safe as conventional crops with respect to feed, food, and the environment. This paper describes this global process and the various analytical tests that must accompany the product during the course of development, throughout its market life, and beyond.

A step-wise approach towards introduction of an alcohol based hand rub, and implementation of front line ownership- using a, rural, tertiary care hospital in central India as a model.

PubMed

Sharma, Megha; Joshi, Rita; Shah, Harshada; Macaden, Ragini; Lundborg, Cecilia Stålsby

2015-04-29

Appropriate hand hygiene is a gold standard to combat healthcare associated infections (HAIs). The World Health Organization (WHO) has recommended alcohol based hand rub (ABHR) as the most effective tool to maintain hand hygiene. In resource poor settings commercially available ABHR is not "economically accessible". The objectives of this study were to assess the acceptability of, and to build confidence for an in-house prepared (based on WHO guidelines) alcohol based hand rub among healthcare workers (HCWs) using a rural, tertiary care hospital in central India as an example. A series of activities were developed and conducted based on the Precede-Proceed model, the Trans Theoretical model of behaviour change, Front line ownership and Social marketing. A modified WHO-ABHR formulation, the 'test product' and 'WHO product evaluation form' were used for self assessment of acceptability of the 'test product'. Confidence building activities, as finger tip culture, visual portrayal method and handmade posters, were used in high-risk wards for HAIs, to build confidence for the 'test product' in removing transient flora from the hands. A locally developed feedback from was used to evaluate the impact of the activities conducted. Overall 183 HCWs were enrolled for the assessment of the 'test product' (130- doctors and 53 nurses). Out of these 83% (108/130) doctors and 94% (50/53) nurses were satisfied with the 'test product'. The confidence building activity was conducted with 116 participants (49 doctors). After single use of the 'test product', overall a significant reduction was observed for the CFUs on the blood agar plates (0.77 Log(10), p < 0.001). A complete reduction (100%) in colony forming units on incubated blood agar plates was seen for 13% (15/116) participants. Eighty two percent (95/116) participants expressed their confidence in the 'test product'. The self reported acceptance level for the 'test product' was high. The use of finger tip culture coupled with the visual portrayal was perceived as a convincing and highly effective way to develop confidence in HCWs. Thus, is the foremost step towards successful introduction of ABHR and can be seen as a model for similar settings.

Chewability testing in the development of a chewable tablet for hyperphosphatemia.

PubMed

Lanz, Michael; Baldischweiler, Jan; Kriwet, Burkhard; Schill, Jutta; Stafford, John; Imanidis, Georgios

2014-12-01

The official Pharmacopeia does not include a test procedure for the in vitro estimation of the chewability of tablets and publications in the scientific literature on this subject are rare. The purpose of this study was to evaluate a number of different test procedures for assessing chewability, starting from standard breaking force and strength testing and progressing to develop new procedures that simulate the actual chewing action on tablets. A further goal was to apply these test procedures to characterize the chewability of the novel phosphate binder PA21 in comparison with a commercially available phosphate binder chewable tablet product based on lanthanum (Fosrenol®) and a chewable tablet product containing calcium (Calcimagon®) - the latter being used as a standard for its very good chewability. For this purpose, a number of development formulations (different batches of PA21) were tested. The radial or diametrical tablet breaking force offers a poor means of assessing chewability while the axial breaking force was concluded to better reflect the effect of chewing on the tablet. Measurement of tablet behavior upon repeated loading afforded the best simulation of the actual chewing action and was found to have a good discriminating power with respect to chewability of the tested tablets, especially when the tablet was moistened with artificial saliva. The developed tests are shown to be more suitable for evaluating chewing properties of tablets than currently used Pharmacopeial tests. Following ICHQ6, which calls for specification of hardness for chewable tablets, these test procedures enabled the optimal chewability features of PA21 tablets in development to be confirmed whilst still maintaining capabilities for robust production and transportation processes.

Development and demonstration of a lignite-pelletizing process. Phase II report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-01-01

The current work began with scale-up of laboratory equipment to commercial size equipment. For this purpose, BCI used an existing pilot plant that had been assembled to pelletize and indurate taconite ore. BCI determined therewith that lignite pellets can be produced continuously on a pilot scale using the basic process developed in the laboratory. The resulting pellets were found to be similar to the laboratory pellets at equivalent binder compositions. Tests of product made during a 5-ton test run are reported. A 50-ton demonstration test run was made with the pilot plant. Pellet production was sustained for a two-week period.more » The lignite pelletizing process has, therefore, been developed to the point of demonstration in a 50-ton test. BCI has completed and cost estimated a conceptually designed 4000 TPD facility. BCI believes it has demonstrated a technically feasible process to agglomerate lignite by using an asphalt emulsion binder. Product quality is promising. Capital and operating costs appear acceptable to justify continuing support and development. The next step should focus on three areas: production development, process refinement, and cost reduction. For further development, BCI recommends consideration of a 5 to 10 ton/h pilot plant or a 20 to 40 ton/h module of a full sized plant, the lower first cost of the former being offset by the ability to incorporate the latter into a future production unit. Other specific recommendations are made for future study that could lead to process and cost improvements: Binder Formulation, disc Sizing, Drier Bed Depth, and Mixing Approach. Pellet use other than power plant fuel is considered.« less

Testing of optical components to assure performance in a high-average-power environment

NASA Astrophysics Data System (ADS)

Chow, Robert; Taylor, John R.; Eickelberg, William K.; Primdahl, Keith A.

1997-11-01

Evaluation and testing of the optical components used in the atomic vapor laser isotope separation plant is critical for qualification of suppliers, developments of new optical multilayer designs and manufacturing processes, and assurance of performance in the production cycle. The range of specifications requires development of specialized test equipment and methods which are not routine or readily available in industry. Specifications are given on material characteristics such as index homogeneity, subsurface damage left after polishing, microscopic surface defects and contamination, coating absorption, and high average power laser damage. The approach to testing these performance characteristics and assuring the quality throughout the production cycle is described.

Major advances in testing of dairy products: milk component and dairy product attribute testing.

PubMed

Barbano, D M; Lynch, J M

2006-04-01

Milk component analysis is relatively unusual in the field of quantitative analytical chemistry because an analytical test result determines the allocation of very large amounts of money between buyers and sellers of milk. Therefore, there is high incentive to develop and refine these methods to achieve a level of analytical performance rarely demanded of most methods or laboratory staff working in analytical chemistry. In the last 25 yr, well-defined statistical methods to characterize and validate analytical method performance combined with significant improvements in both the chemical and instrumental methods have allowed achievement of improved analytical performance for payment testing. A shift from marketing commodity dairy products to the development, manufacture, and marketing of value added dairy foods for specific market segments has created a need for instrumental and sensory approaches and quantitative data to support product development and marketing. Bringing together sensory data from quantitative descriptive analysis and analytical data from gas chromatography olfactometry for identification of odor-active compounds in complex natural dairy foods has enabled the sensory scientist and analytical chemist to work together to improve the consistency and quality of dairy food flavors.

Pesticide Analytical Methods

EPA Pesticide Factsheets

Pesticide manufacturers must develop and submit analytical methods for their pesticide products to support registration of their products under FIFRA. Learn about these methods as well as SOPs for testing of antimicrobial products against three organisms.

LANDSAT Range Resource Information System. [a user evaluation of green forage and rainfall accumulation maps

NASA Technical Reports Server (NTRS)

Boyd, W. E.; Harlan, J. C.

1981-01-01

A series of test products were developed from LANDSAT data sets for North Central Texas that paralleled the needs of ranchers, technical personnel, and the media. The products and evaluation questionnaires were mailed to approximately 150 ranchers who had reported an interest in evaluating the information systems. In addition to the rancher group, fourteen media people and a thirty-three member group in the agri business/technical community was also chosen to receive test products. The group responses are analyzed. Examples of the test products and associated questionnaires are included.

Physicochemical Characterization of Iron Carbohydrate Colloid Drug Products.

PubMed

Zou, Peng; Tyner, Katherine; Raw, Andre; Lee, Sau

2017-09-01

Iron carbohydrate colloid drug products are intravenously administered to patients with chronic kidney disease for the treatment of iron deficiency anemia. Physicochemical characterization of iron colloids is critical to establish pharmaceutical equivalence between an innovator iron colloid product and generic version. The purpose of this review is to summarize literature-reported techniques for physicochemical characterization of iron carbohydrate colloid drug products. The mechanisms, reported testing results, and common technical pitfalls for individual characterization test are discussed. A better understanding of the physicochemical characterization techniques will facilitate generic iron carbohydrate colloid product development, accelerate products to market, and ensure iron carbohydrate colloid product quality.

Characterization of a whole, inactivated influenza (H5N1) vaccine.

PubMed

Tada, Yoshikazu

2008-11-01

Effective vaccines against the highly pathogenic influenza A/H5N1 virus are being developed worldwide. In Japan, two adjuvanted, inactivated, whole-virion influenza vaccines were recently developed and licensed as mock-up, pre-pandemic vaccine formulations by the Ministry of Health and Labor Welfare of Japan. During the vaccine design and development process, various obstacles were overcome and, in this report, we introduce the non clinical production, immunogenicity data in human and development process that was associated with egg-derived adjuvanted, inactivated, whole-virion influenza A (H5N1) vaccine. Pilot lots of H5N1 vaccine were produced using the avirulent H5N1 reference strain A/Vietnam/1194/2004 (H5N1) NIBRG-14 and administered following adsorption with aluminum hydroxide as an adjuvant. Quality control and formulation stability tests were performed before clinical trials were initiated (phase I-III). The research foundation for microbial diseases of Osaka University (BIKEN) carried out vaccine production, quality control, stability testing and the phase I clinical trial in addition to overseeing the licensing of this vaccine. Mitsubishi Chemical Safety Institute Ltd. carried out the non clinical pharmacological toxicity and safety studies and the Japanese medical association carried out the phase II/III trials. Phase I-III trials took place in 2006. The production processes were well controlled by established tests and validations. Vaccine quality was confirmed by quality control, stability and pre-clinical tests, and the vaccine was approved as a mock-up, pre-pandemic vaccine by the Ministry of Health and Labor Welfare of Japan. Numerous safety and efficacy procedures were carried out prior to the approval of the described vaccine formulation. Some of these procedures were of particular importance e.g., vaccine development, validation, and quality control tests that included strict monitoring of the hemagglutinin (HA) content of the vaccine formulations. Improving vaccine productivity, shortening the production period and improving antigen yield of the avirulent vaccine strains were also considered important vaccine development criteria.

Development of a tornado safe room door from wood Products: door design and impact testing

Treesearch

Robert H. Falk; James J. Bridwell

2016-01-01

In this study, a tornado safe room door built from wood products and steel sheeting was developed and impact-tested according to tornado safe room standards. Results indicate that an door constructed from as few as two sheets of 23/32-in. (18.26-mm) construction-grade plywood and overlaid with 18-gauge (0.05-in.- (1.27- mm-) thick) steel can pass the required impact...

Hydrazine Catalyst Production: Sustaining S-405 Technology

NASA Technical Reports Server (NTRS)

Wucherer, E. J.; Cook, Timothy; Stiefel, Mark; Humphries, Randy, Jr.; Parker, Janet

2003-01-01

The development of the iridium-based Shell 405 catalyst for spontaneous decomposition of hydrazine was one of the key enabling technologies for today's spacecraft and launch vehicles. To ensure that this crucial technology was not lost when Shell elected to exit the business, Aerojet, supported by NASA, has developed a dedicated catalyst production facility that will supply catalyst for future spacecraft and launch vehicle requirements. We have undertaken a program to transfer catalyst production from Shell Chemical USA (Houston, TX) to Aerojet's Redmond, WA location. This technology transition was aided by Aerojet's 30 years of catalyst manufacturing experience and NASA diligence and support in sustaining essential technologies. The facility has produced and tested S-405 catalyst to existing Shell 405 specifications and standards. Our presentation will describe the technology transition effort including development of the manufacturing facility, capture of the manufacturing process, test equipment validation, initial batch build and final testing.

Designing a ruggedisation lab to characterise materials for harsh environments.

PubMed

Frazzette, Nicholas; Jethva, Janak; Mehta, Khanjan; Stapleton, Joshua J; Randall, Clive

Designing products for use in developing countries presents a unique set of challenges including harsh operating environments, costly repairs and maintenance, and users with varying degrees of education and device familiarity. For products to be robust, adaptable and durable, they need to be ruggedised for environmental factors such as high temperature and humidity as well as different operational conditions such as shock and chemical exposure. The product characterisation and ruggedisation processes require specific expertise and resources that are seldom available outside of large corporations and elite national research labs. There is no standardised process since product needs strongly depend on the context and user base, making it particularly onerous for underfunded start-ups and academic groups. Standardised protocols that identify essential lab testing regimens for specific contexts and user groups can complement field-testing and accelerate the product development process while reducing costs. This article synthesises current methods and strategies for product testing employed by large corporations as well as defence-related entities. A technological and organisational framework for a service-for-fee product characterisation and ruggedisation lab that reduces costs and shortens the timespan from product invention to commercial launch in harsh settings is presented.

Point-of-care diagnostics: extending the laboratory network to reach the last mile.

PubMed

Drain, Paul K; Rousseau, Christine

2017-03-01

More point-of-care (POC) diagnostic tests are becoming available for HIV diagnosis and treatment in resource-limited settings. These novel technologies have the potential to foster decentralized HIV care and treatment for the benefit of clinical laboratories, HIV clinics, and HIV-infected patients. There continue to be many business, technological, and operational challenges that limit product development and regulatory approval, which limits products available for the required operational and cost-effectiveness studies and delays policy adoption and implementation. Although the rapid HIV diagnostic test has been widely successful, the pathways for POC CD4 cell count and HIV viral load assay analyzers have been more challenging. We describe significant hurdles for product development, approval, and implementation, which include the business case, technical development, clinical impact, and integrating laboratory and clinical networks. The objective of this review is to highlight the obstacles for developing and implementing appropriate strategies for POC HIV testing assays to improve the clinical services for HIV-infected patients in resource-limited settings.

Developing Market Opportunities for Flexible Rooftop Applications of PV Using Flexible CIGS Technology: Market Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabnani, L.; Skumanich, A.; Ryabova, E.

There has been a recent upsurge in developments for building-integrated phototovoltaics (BiPV) roof top materials based on CIGS. Several new companies have increased their presence and are looking to bring products to market for this application in 2011. For roof-top application, there are significant key requirements beyond just having good conversion efficiency. Other attributes include lightweight, as well as moisture-proof, and fully functionally reliable. The companies bringing these new BIPV/BAPV products need to ensure functionality with a rigorous series of tests, and have an extensive set of 'torture' tests to validate the capability. There is a convergence of form, aesthetics,more » and physics to ensure that the CIGS BiPV deliver on their promises. This article will cover the developments in this segment of the BiPV market and delve into the specific tests and measurements needed to characterize the products. The potential market sizes are evaluated and the technical considerations developed.« less

Cleanroom certification model

NASA Technical Reports Server (NTRS)

Currit, P. A.

1983-01-01

The Cleanroom software development methodology is designed to take the gamble out of product releases for both suppliers and receivers of the software. The ingredients of this procedure are a life cycle of executable product increments, representative statistical testing, and a standard estimate of the MTTF (Mean Time To Failure) of the product at the time of its release. A statistical approach to software product testing using randomly selected samples of test cases is considered. A statistical model is defined for the certification process which uses the timing data recorded during test. A reasonableness argument for this model is provided that uses previously published data on software product execution. Also included is a derivation of the certification model estimators and a comparison of the proposed least squares technique with the more commonly used maximum likelihood estimators.

Development of a Process for a High Capacity Arc Heater Production of Silicon for Solar Arrays

NASA Technical Reports Server (NTRS)

Reed, W. H.

1979-01-01

A program was established to develop a high temperature silicon production process using existing electric arc heater technology. Silicon tetrachloride and a reductant (sodium) are injected into an arc heated mixture of hydrogen and argon. Under these high temperature conditions, a very rapid reaction is expected to occur and proceed essentially to completion, yielding silicon and gaseous sodium chloride. Techniques for high temperature separation and collection were developed. Included in this report are: test system preparation; testing; injection techniques; kinetics; reaction demonstration; conclusions; and the project status.

Early Benchmarks of Product Generation Capabilities of the GOES-R Ground System for Operational Weather Prediction

NASA Astrophysics Data System (ADS)

Kalluri, S. N.; Haman, B.; Vititoe, D.

2014-12-01

The ground system under development for Geostationary Operational Environmental Satellite-R (GOES-R) series of weather satellite has completed a key milestone in implementing the science algorithms that process raw sensor data to higher level products in preparation for launch. Real time observations from GOES-R are expected to make significant contributions to Earth and space weather prediction, and there are stringent requirements to product weather products at very low latency to meet NOAA's operational needs. Simulated test data from all the six GOES-R sensors are being processed by the system to test and verify performance of the fielded system. Early results show that the system development is on track to meet functional and performance requirements to process science data. Comparison of science products generated by the ground system from simulated data with those generated by the algorithm developers show close agreement among data sets which demonstrates that the algorithms are implemented correctly. Successful delivery of products to AWIPS and the Product Distribution and Access (PDA) system from the core system demonstrate that the external interfaces are working.

Pharmaceutical quality by design: product and process development, understanding, and control.

PubMed

Yu, Lawrence X

2008-04-01

The purpose of this paper is to discuss the pharmaceutical Quality by Design (QbD) and describe how it can be used to ensure pharmaceutical quality. The QbD was described and some of its elements identified. Process parameters and quality attributes were identified for each unit operation during manufacture of solid oral dosage forms. The use of QbD was contrasted with the evaluation of product quality by testing alone. The QbD is a systemic approach to pharmaceutical development. It means designing and developing formulations and manufacturing processes to ensure predefined product quality. Some of the QbD elements include: Defining target product quality profile; Designing product and manufacturing processes; Identifying critical quality attributes, process parameters, and sources of variability; Controlling manufacturing processes to produce consistent quality over time. Using QbD, pharmaceutical quality is assured by understanding and controlling formulation and manufacturing variables. Product testing confirms the product quality. Implementation of QbD will enable transformation of the chemistry, manufacturing, and controls (CMC) review of abbreviated new drug applications (ANDAs) into a science-based pharmaceutical quality assessment.

Success rates for product development strategies in new drug development.

PubMed

Dahlin, E; Nelson, G M; Haynes, M; Sargeant, F

2016-04-01

While research has examined the likelihood that drugs progress across phases of clinical trials, no research to date has examined the types of product development strategies that are the most likely to be successful in clinical trials. This research seeks to identify the strategies that are most likely to reach the market-those generated using a novel product development strategy or strategies that combine a company's expertise with both drugs and indications, which we call combined experience strategies. We evaluate the success of product development strategies in the drug development process for a sample of 2562 clinical trials completed by 406 US pharmaceutical companies. To identify product development strategies, we coded each clinical trial according to whether it consisted of an indication or a drug that was new to the firm. Accordingly, a clinical trial that consists of both an indication and a drug that were both new to the firm represents a novel product development strategy; indication experience is a product development strategy that consists of an indication that a firm had tested previously in a clinical trial, but with a drug that was new to the firm; drug experience is a product development strategy that consists of a drug that the firm had prior experience testing in clinical trials, but with an indication that was new to the firm; combined experience consists of both a drug and an indication that the firm had experience testing in clinical trials. Success rates for product development strategies across clinical phases were calculated for the clinical trials in our sample. Combined experience strategies had the highest success rate. More than three and a half percent (0·036) of the trials that combined experience with drugs and indications eventually reached the market. The next most successful strategy is drug experience (0·025) with novel strategies trailing closely (0·024). Indication experience strategies are the least successful (0·008). These differences are statistically significant. The primary contribution of this study is that product development strategies combining experience with drugs and indications strategies are the most likely to reach the market, even though they are least common strategy. Therefore, combined experience strategies remain underutilized. The findings also suggest a promising path for pursuing combined experience strategies: gaining expertise with drugs is likely to be a more effective path to gaining the expertise necessary for developing subsequent recombination strategies. © 2016 John Wiley & Sons Ltd.

EFFECTS OF ENDOCRINE DISRUPTING CHEMICALS (EDCS) ON FETAL TESTES HORMONE PRODUCTION

EPA Science Inventory

Effects of Endocrine Disrupting Chemicals (EDCs) on Fetal Testes Hormone Production
CS Lambright, VS Wilson, JR Furr, CJ Wolf, N Noriega, LE Gray, Jr
US EPA, ORD/NHEERL/RTD, RTP, NC 27711

Exposure to EDCs during critical periods of fetal sexual development can have...

Freight Wing Trailer Aerodynamics Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sean Graham

2007-10-31

Freight Wing Incorporated utilized the opportunity presented by a DOE category two Inventions and Innovations grant to commercialize and improve upon aerodynamic technology for semi-tuck trailers, capable of decreasing heavy vehicle fuel consumption, related environmental damage, and U.S. consumption of foreign oil. Major project goals included the demonstration of aerodynamic trailer technology in trucking fleet operations, and the development and testing of second generation products. A great deal of past scientific research has demonstrated that streamlining box shaped semi-trailers can significantly reduce a truck’s fuel consumption. However, significant design challenges have prevented past concepts from meeting industry needs. Freight Wingmore » utilized a 2003 category one Inventions and Innovations grant to develop practical solutions to trailer aerodynamics. Fairings developed for the front, rear, and bottom of standard semi-trailers together demonstrated a 7% improvement to fuel economy in scientific tests conducted by the Transportation Research Center (TRC). Operational tests with major trucking fleets proved the functionality of the products, which were subsequently brought to market. This category two grant enabled Freight Wing to further develop, test and commercialize its products, resulting in greatly increased understanding and acceptance of aerodynamic trailer technology. Commercialization was stimulated by offering trucking fleets 50% cost sharing on trial implementations of Freight Wing products for testing and evaluation purposes. Over 230 fairings were implemented through the program with 35 trucking fleets including industry leaders such as Wal-Mart, Frito Lay and Whole Foods. The feedback from these testing partnerships was quite positive with product performance exceeding fleet expectations in many cases. Fleet feedback also was also valuable from a product development standpoint and assisted the design of several second generation products intended to further improve efficiency, lower costs, and enhance durability. Resulting products demonstrated a 30% efficiency improvement in full scale wind tunnel tests. The fuel savings of our most promising product, the “Belly Fairing” increased from 4% to 6% in scientific track and operational tests. The project successfully demonstrated the economic feasibility of trailer aerodynamics and positioned the technology to realize significant public benefits. Scientific testing conducted with partners such as the EPA Smartway program and Transport Canada clearly validated the fuel and emission saving potential of the technology. The Smartway program now recommends trailer aerodynamics as a certified fuel saving technology and is offering incentives such as low interest loans. Trailer aerodynamics can save average trucks over 1,100 gallons of fuel an 13 tons of emissions every 100,000 miles, a distance many trucks travel annually. These fuel savings produce a product return on investment period of one to two years in average fleet operations. The economic feasibility of the products was validated by participating fleets, several of which have since completed large implementations or demonstrated an interest in volume orders. The commercialization potential of the technology was also demonstrated, resulting in a national distribution and manufacturing partnership with a major industry supplier, Carrier Transicold. Consequently, Freight Wing is well positioned to continue marketing trailer aerodynamics to the trucking industry. The participation of leading fleets in this project served to break down the market skepticism that represents a primary barrier to widespread industry utilization. The benefits of widespread utilization of the technology could be quite significant for both the transportation industry and the public. Trailer aerodynamics could potentially save the U.S. trucking fleet over a billion gallons of fuel and 20 million tons of emissions annually.« less

Reduction in in vivo testing at the National Veterinary Services Laboratories of the United States Department of Agriculture.

PubMed

Hyde, R L

1986-01-01

Efforts are being made at the National Veterinary Services Laboratories to reduce in vivo testing of USDA licensed veterinary vaccines. A hemagglutination test for determining potency of killed parvovirus vaccine is currently being used for canine and swine adjuvanted and nonadjuvanted products; a serum neutralization inhibition test (SNIT) is being developed for potency testing of killed adjuvanted infectious bovine rhinotracheitis (IBR), bovine virus diarrhea (BVD) and parainfluenza (PI3) vaccines: and a tissue culture titration method for live avian encephalomyelitis virus vaccine is being pursued as a replacement for the old hatch-out chick embryo titration method. Difficulties in separating the antigen from oil emulsion products are preventing significant advances in developing in vitro testing procedures for poultry killed-virus vaccines.

Tobacco and Nicotine Product Testing

PubMed Central

Biener, Lois; Leischow, Scott J.; Zeller, Mitch R.

2012-01-01

Introduction: Tobacco product testing is a critical component of the Family Smoking Prevention and Tobacco Control Act (FSPTCA), which grants the Food and Drug Administration the authority to regulate tobacco products. The availability of methods and measures that can provide accurate data on the relative health risks across types of tobacco products, brands, and subbrands of tobacco products on the validity of any health claims associated with a product, and on how consumers perceive information on products toxicity or risks is crucial for making decisions on the product's potential impact on public health. These tools are also necessary for making assessments of the impact of new indications for medicinal products (other than cessation) but more importantly of tobacco products that may in the future be marketed as cessation tools. Objective: To identify research opportunities to develop empirically based and comprehensive methods and measures for testing tobacco and other nicotine-containing products so that the best science is available when decisions are made about products or policies. Methods: Literature was reviewed to address sections of the FSPTCA relevant to tobacco product evaluation; research questions were generated and then reviewed by a committee of research experts. Results: A research agenda was developed for tobacco product evaluation in the general areas of toxicity and health risks, abuse liability, consumer perception, and population effects. Conclusion: A cohesive, systematic, and comprehensive assessment of tobacco products is important and will require building consensus and addressing some crucial research questions. PMID:21460383

Research and Development of High-performance Explosives

PubMed Central

Cornell, Rodger; Wrobel, Erik; Anderson, Paul E.

2016-01-01

Developmental testing of high explosives for military applications involves small-scale formulation, safety testing, and finally detonation performance tests to verify theoretical calculations. small-scale For newly developed formulations, the process begins with small-scale mixes, thermal testing, and impact and friction sensitivity. Only then do subsequent larger scale formulations proceed to detonation testing, which will be covered in this paper. Recent advances in characterization techniques have led to unparalleled precision in the characterization of early-time evolution of detonations. The new technique of photo-Doppler velocimetry (PDV) for the measurement of detonation pressure and velocity will be shared and compared with traditional fiber-optic detonation velocity and plate-dent calculation of detonation pressure. In particular, the role of aluminum in explosive formulations will be discussed. Recent developments led to the development of explosive formulations that result in reaction of aluminum very early in the detonation product expansion. This enhanced reaction leads to changes in the detonation velocity and pressure due to reaction of the aluminum with oxygen in the expanding gas products. PMID:26966969

Product assurance policies and procedures for flight dynamics software development

NASA Technical Reports Server (NTRS)

Perry, Sandra; Jordan, Leon; Decker, William; Page, Gerald; Mcgarry, Frank E.; Valett, Jon

1987-01-01

The product assurance policies and procedures necessary to support flight dynamics software development projects for Goddard Space Flight Center are presented. The quality assurance and configuration management methods and tools for each phase of the software development life cycles are described, from requirements analysis through acceptance testing; maintenance and operation are not addressed.

AGR-1 Compact 1-3-1 Post-Irradiation Examination Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demkowicz, Paul Andrew

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established to perform the requisite research and development on tristructural isotropic (TRISO) coated particle fuel to support deployment of a high-temperature gas-cooled reactor (HTGR). The work continues as part of the Advanced Reactor Technologies (ART) TRISO Fuel program. The overarching program goal is to provide a baseline fuel qualification data set to support licensing and operation of an HTGR. To achieve these goals, the program includes the elements of fuel fabrication, irradiation, post-irradiation examination (PIE) and safety testing, fuel performance modeling, and fission product transport (INL 2015). A seriesmore » of fuel irradiation experiments is being planned and conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). These experiments will provide data on fuel performance under irradiation, support fuel process development, qualify the fuel for normal operating conditions, provide irradiated fuel for safety testing, and support the development of fuel performance and fission product transport models. The first of these irradiation tests, designated AGR-1, began in the ATR in December 2006 and ended in November 2009. This experiment was conducted primarily to act as a shakedown test of the multicapsule test train design and provide early data on fuel performance for use in fuel fabrication process development. It also provided samples for post-irradiation safety testing, where fission product retention of the fuel at high temperatures will be experimentally measured. The capsule design and details of the AGR-1 experiment have been presented previously (Grover, Petti, and Maki 2010, Maki 2009).« less

AGR-1 Compact 5-3-1 Post-Irradiation Examination Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demkowicz, Paul; Harp, Jason; Winston, Phil

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established to perform the requisite research and development on tristructural isotropic (TRISO) coated particle fuel to support deployment of a high-temperature gas-cooled reactor (HTGR). The work continues as part of the Advanced Reactor Technologies (ART) TRISO Fuel program. The overarching program goal is to provide a baseline fuel qualification data set to support licensing and operation of an HTGR. To achieve these goals, the program includes the elements of fuel fabrication, irradiation, post-irradiation examination (PIE) and safety testing, fuel performance, and fission product transport (INL 2015). A series ofmore » fuel irradiation experiments is being planned and conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). These experiments will provide data on fuel performance under irradiation, support fuel process development, qualify the fuel for normal operating conditions, provide irradiated fuel for safety testing, and support the development of fuel performance and fission product transport models. The first of these irradiation tests, designated AGR-1, began in the ATR in December 2006 and ended in November 2009. This experiment was conducted primarily to act as a shakedown test of the multicapsule test train design and provide early data on fuel performance for use in fuel fabrication process development. It also provided samples for post-irradiation safety testing, where fission product retention of the fuel at high temperatures will be experimentally measured. The capsule design and details of the AGR-1 experiment have been presented previously.« less

The International Xenotransplantation Association consensus statement on conditions for undertaking clinical trials of porcine islet products in type 1 diabetes--chapter 3: Pig islet product manufacturing and release testing.

PubMed

Korbutt, Gregory S

2009-01-01

This chapter provides recommendations on pig islet product manufacturing and release testing to scientific and corporate programs interested in future clinical studies using xenogeneic porcine pancreatic islet cell products for the treatment of type 1 diabetes.To facilitate control of manufacturing as well as reproducibility and consistency of product lots, the manufacturing process, and the manufacturing facility must be in compliance with current Good Manufacturing Practices regulations. Data must be provided to demonstrate that islet products can be consistently prepared that would meet basic lot release requirements. To facilitate product safety: (i) materials used in the manufacturing process, including the pig pancreas, must be free of adventitious agents; (ii) islets must be manufactured using aseptic processing; and (iii) final product must undergo tests for sterility, mycoplasma (if cultured) and endotoxin. Safety specifications for pig islet product release include a negative Gram stain and an endotoxin content of <5.0 EU/kg recipient body weight. Product post-release assessments must include sterility cultures on the final product. Because results for sterility are available only retrospectively, a plan of action must be in place for patient notification and treatment in case the sterility culture results are positive for contamination. Product characterization information must address important aspects of lot release testing such as identity/purity (cell composition), quantity [islet equivalents (IE), cell number] and potency (insulin secretory capacity, oxygen consumption rate corrected for DNA or transplant bioassay in immunoincompetent diabetic mice). This information is also critical to demonstrate manufacturing control and product consistency across multiple islet preparations (lots). Providing islet products containing an islet mass sufficient to restore euglycemia in trial participants (>or=10 000 IE/kg) requires pooling of islets from multiple donor pancreata (two to four from adult donors and seven to 10 from neonatal donors). Demonstration of product consistency across products from individual pancreata would warrant release testing to be performed on a sample of the pooled product. As product development and clinical trials advance, the increasingly more detailed specifications of potency assays on adult porcine islet products are expected to be predictive of post-transplant glycemic control. The immaturity of fetal and neonatal porcine islet tissue precludes the use of in vitro insulin secretion as a potency test as part of lot release testing; another measure of potency appropriate to fetal and neonatal cells will need to be developed for product release testing and evaluation of aliquots of these products in mouse transplant bioassays should be performed to provide meaningful post-release information.

In vitro methods for evaluating skin hydration under diapers and incontinence products.

PubMed

Tate, M L; Wright, A S

2017-11-01

Excessive skin hydration from wearing wet undergarments, such as infant diapers and adult incontinence products, has been historically problematic. Skin damage occurs from wetness (urine) and limited product breathability. Evaporative water loss has been measured on adult arms (armband method) or infant torsos (on-baby method), after wearing a saline-insulted diaper product. The current study developed a reliable in vitro method of evaluating diaper and incontinence products for improvements in skin dryness. A simulated skin substrate was applied to a heated mechanical arm or baby torso. A disposable diaper or incontinence product was wrapped around the arm or baby torso, and loaded with saline. Hydration of the simulated skin was measured by evaporimetry and compared with clinical data from adult armband evaluations. The heated mechanical arm and baby torso accurately distinguished products for skin dryness. Eight diaper products were evaluated and compared to human test results. The torso in vitro and mechanical arm evaluations demonstrated strong correlations to human epidermal water loss evaluations, with repeatable results. Additionally, the bench test has been used for adult incontinence products, and it proved to differentiate those products as well as infant products. A rapid and reliable means of evaluation has been developed, and it is predictive of human subject testing. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Review of the cultivation program within the National Alliance for Advanced Biofuels and Bioproducts

DOE PAGES

Lammers, Peter J.; Huesemann, Michael; Boeing, Wiebke; ...

2016-12-12

The cultivation efforts within the National Alliance for Advanced Biofuels and Bioproducts (NAABB) were developed to provide four major goals for the consortium, which included biomass production for downstream experimentation, development of new assessment tools for cultivation, development of new cultivation reactor technologies, and development of methods for robust cultivation. The NAABB consortium testbeds produced over 1500 kg of biomass for downstream processing. The biomass production included a number of model production strains, but also took into production some of the more promising strains found through the prospecting efforts of the consortium. Cultivation efforts at large scale are intensive andmore » costly, therefore the consortium developed tools and models to assess the productivity of strains under various environmental conditions, at lab scale, and validated these against scaled outdoor production systems. Two new pond-based bioreactor designs were tested for their ability to minimize energy consumption while maintaining, and even exceeding, the productivity of algae cultivation compared to traditional systems. Also, molecular markers were developed for quality control and to facilitate detection of bacterial communities associated with cultivated algal species, including the Chlorella spp. pathogen, Vampirovibrio chlorellavorus, which was identified in at least two test site locations in Arizona and New Mexico. Finally, the consortium worked on understanding methods to utilize compromised municipal wastewater streams for cultivation. In conclusion, this review provides an overview of the cultivation methods and tools developed by the NAABB consortium to produce algae biomass, in robust low energy systems, for biofuel production.« less

41 CFR 101-29.402 - Exceptions to mandatory use of Federal product descriptions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... single manufacturer's design. (8) The product is unique to a single system. (9) The product (excluding...; (2) Items required for experiment, test, or research and development; or (3) Spare parts, components...

41 CFR 101-29.402 - Exceptions to mandatory use of Federal product descriptions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... single manufacturer's design. (8) The product is unique to a single system. (9) The product (excluding...; (2) Items required for experiment, test, or research and development; or (3) Spare parts, components...

41 CFR 101-29.402 - Exceptions to mandatory use of Federal product descriptions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... single manufacturer's design. (8) The product is unique to a single system. (9) The product (excluding...; (2) Items required for experiment, test, or research and development; or (3) Spare parts, components...

41 CFR 101-29.402 - Exceptions to mandatory use of Federal product descriptions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... single manufacturer's design. (8) The product is unique to a single system. (9) The product (excluding...; (2) Items required for experiment, test, or research and development; or (3) Spare parts, components...

41 CFR 101-29.402 - Exceptions to mandatory use of Federal product descriptions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... single manufacturer's design. (8) The product is unique to a single system. (9) The product (excluding...; (2) Items required for experiment, test, or research and development; or (3) Spare parts, components...

Development of a nondestructive leak testing method utilizing the head space analyzer for ampoule products containing ethanol-based solutions.

PubMed

Sudo, Hirotaka; O'driscoll, Michael; Nishiwaki, Kenji; Kawamoto, Yuji; Gammell, Philip; Schramm, Gerhard; Wertli, Toni; Prinz, Heino; Mori, Atsuhide; Sako, Kazuhiro

2012-01-01

The application of a head space analyzer for oxygen concentration was examined to develop a novel ampoule leak test method. Studies using ampoules filled with ethanol-based solution and with nitrogen in the headspace demonstrated that the head space analysis (HSA) method showed sufficient sensitivity in detecting an ampoule crack. The proposed method is the use of HSA in conjunction with the pretreatment of an overpressurising process known as bombing to facilitate the oxygen flow through the crack in the ampoule. The method was examined in comparative studies with a conventional dye ingress method, and the results showed that the HSA method exhibits sensitivity superior to the dye method. The results indicate that the HSA method in combination with the bombing treatment provides potential application as a leak test for the detection of container defects not only for ampoule products with ethanol-based solutions, but also for testing lyophilized products in vials with nitrogen in the head space. The application of a head space analyzer for oxygen concentration was examined to develop a novel ampoule leak test method. The proposed method is the use of head space analysis (HSA) in conjunction with the pretreatment of an overpressurising process known as bombing to facilitate oxygen flow through the crack in the ampoule for use in routine production. The result of the comparative study with a conventional dye leak test method indicates that the HSA method in combination with the bombing treatment can be used as a leak test method, enabling detection of container defects.

Applied Integrated Design in Composite UAV Development

NASA Astrophysics Data System (ADS)

Vasić, Zoran; Maksimović, Stevan; Georgijević, Dragutin

2018-04-01

This paper presents a modern approach to integrated development of Unmanned Aerial Vehicle made of laminated composite materials from conceptual design, through detail design, strength and stiffness analyses, definition and management of design and production data, detailed tests results and other activities related to development of laminated composite structures with main of its particularities in comparison to metal structures. Special attention in this work is focused to management processes of product data during life cycle of an UAV and experimental tests of its composite wing. Experience shows that the automation management processes of product data during life cycle, as well as processes of manufacturing, are inevitable if a company wants to get cheaper and quality composite aircraft structures. One of the most effective ways of successful management of product data today is Product Life cycle Management (PLM). In terms of the PLM, a spectrum of special measures and provisions has to be implemented when defining fiber-reinforced composite material structures in comparison to designing with metals which is elaborated in the paper.

Development of a SARS Coronavirus Vaccine from Recombinant Spike Protein Plus Delta Inulin Adjuvant.

PubMed

McPherson, Clifton; Chubet, Richard; Holtz, Kathy; Honda-Okubo, Yoshikazu; Barnard, Dale; Cox, Manon; Petrovsky, Nikolai

2016-01-01

Given periodic outbreaks of fatal human infections caused by coronaviruses, development of an optimal coronavirus vaccine platform capable of rapid production is an ongoing priority. This chapter describes the use of an insect cell expression system for rapid production of a recombinant vaccine against severe acute respiratory syndrome coronavirus (SARS). Detailed methods are presented for expression, purification, and release testing of SARS recombinant spike protein antigen, followed by adjuvant formulation and animal testing. The methods herein described for rapid development of a highly protective SARS vaccine are equally suited to rapid development of vaccines against other fatal human coronavirus infections, e.g., the MERS coronavirus.

Why do some wood-adhesive bonds respond poorly to accelerated moisture-resistant tests?

Treesearch

Charles R. Frihart; James M. Wescott

2008-01-01

The most challenging part of developing acceptable adhesives for wood bonding often is to create a bond that will withstand exposure to wet conditions or wet/dry cycles. Products that pass these tests have been developed empirically, but the aspects that make it difficult for adhesives to pass these tests and systematically ways to develop more durable adhesive bonds...

Tobacco industry consumer research on socially acceptable cigarettes.

PubMed

Ling, P M; Glantz, S A

2005-10-01

To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Analysis of previously secret tobacco industry documents. 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies.

Tobacco industry consumer research on socially acceptable cigarettes

PubMed Central

Ling, P; Glantz, S

2005-01-01

Objective: To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Methods: Analysis of previously secret tobacco industry documents. Results: 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Conclusions: Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies. PMID:16183968

Test Driven Development: Lessons from a Simple Scientific Model

NASA Astrophysics Data System (ADS)

Clune, T. L.; Kuo, K.

2010-12-01

In the commercial software industry, unit testing frameworks have emerged as a disruptive technology that has permanently altered the process by which software is developed. Unit testing frameworks significantly reduce traditional barriers, both practical and psychological, to creating and executing tests that verify software implementations. A new development paradigm, known as test driven development (TDD), has emerged from unit testing practices, in which low-level tests (i.e. unit tests) are created by developers prior to implementing new pieces of code. Although somewhat counter-intuitive, this approach actually improves developer productivity. In addition to reducing the average time for detecting software defects (bugs), the requirement to provide procedure interfaces that enable testing frequently leads to superior design decisions. Although TDD is widely accepted in many software domains, its applicability to scientific modeling still warrants reasonable skepticism. While the technique is clearly relevant for infrastructure layers of scientific models such as the Earth System Modeling Framework (ESMF), numerical and scientific components pose a number of challenges to TDD that are not often encountered in commercial software. Nonetheless, our experience leads us to believe that the technique has great potential not only for developer productivity, but also as a tool for understanding and documenting the basic scientific assumptions upon which our models are implemented. We will provide a brief introduction to test driven development and then discuss our experience in using TDD to implement a relatively simple numerical model that simulates the growth of snowflakes. Many of the lessons learned are directly applicable to larger scientific models.

Commercial opportunities in bioseparations and physiological testing aboard Space Station Freedom

NASA Technical Reports Server (NTRS)

Hymer, W. C.

1992-01-01

The Center for Cell Research (CCR) is a NASA Center for the Commercial Development of Space which has as its main goal encouraging industry-driven biomedical/biotechnology space projects. Space Station Freedom (SSF) will provide long duration, crew-tended microgravity environments which will enhance the opportunities for commercial biomedical/biotechnology projects in bioseparations and physiological testing. The CCR bioseparations program, known as USCEPS (for United States Commercial Electrophoresis Program in Space), is developing access for American industry to continuous-flow electrophoresis aboard SSF. In space, considerable scale-up of continuous free-flow electrophoresis is possible for cells, sub cellular particles, proteins, growth factors, and other biological products. The lack of sedemination and buoyancy-driven convection flow enhances purity of separations and the amount of material processed/time. Through the CCR's physiological testing program, commercial organizations will have access aboard SSF to physiological systems experiments (PSE's); the Penn State Biomodule; and telemicroscopy. Physiological systems experiments involve the use of live animals for pharmaceutical product testing and discovery research. The Penn State Biomodule is a computer-controlled mini lab useful for projects involving live cells or tissues and macro molecular assembly studies, including protein crystallization. Telemicroscopy will enable staff on Earth to manipulate and monitor microscopic specimens on SSF for product development and discovery research or for medical diagnosis of astronaut health problems. Space-based product processing, testing, development, and discovery research using USCEPS and CCR's physiological testing program offer new routes to improved health on Earth. Direct crew involvement-in biomedical/biotechnology projects aboard SSF will enable better experimental outcomes. The current data base shows that there is reason for considerable optimism regarding what the CCDS program and the biomedical/biotechnology industry can expect to gain from a permanent manned presence in space.

Translating research into licensed vaccines and validated and licensed diagnostic tests.

PubMed

Hill, R E; Foley, P L; Clough, N E; Ludemann, L R; Murtle, D C

2013-01-01

The USDA Center for Veterinary Biologics (CVB) has the regulatory authority to issue licenses and permits that allow the marketing of pure, safe, potent, and effective veterinary biological products. Under the standard licensing or permitting process, a manufacturer develops, characterizes, and evaluates a product prior to licensure. The CVB evaluates the submitted information, inspects the manufacturing facilities and methods of production and testing, and confirms key product test results through independent testing. This complete and comprehensive evaluation may not be possible during the emergence of a new animal disease or in response to an introduction of a significant transboundary animal disease agent. Processes are in place in the US that allow for more rapid availability of veterinary products in an emerging or emergency animal health situation. But, it can be advantageous to attain preapproval of products prior to their anticipated need. In this article, issues associated with obtaining approval for use of a biological product under emerging or emergency conditions are discussed.

Dry powder inhalers: An overview of the in vitro dissolution methodologies and their correlation with the biopharmaceutical aspects of the drug products.

PubMed

Velaga, Sitaram P; Djuris, Jelena; Cvijic, Sandra; Rozou, Stavroula; Russo, Paola; Colombo, Gaia; Rossi, Alessandra

2018-02-15

In vitro dissolution testing is routinely used in the development of pharmaceutical products. Whilst the dissolution testing methods are well established and standardized for oral dosage forms, i.e. tablets and capsules, there are no pharmacopoeia methods or regulatory requirements for testing the dissolution of orally inhaled powders. Despite this, a wide variety of dissolution testing methods for orally inhaled powders has been developed and their bio-relevance has been evaluated. This review provides an overview of the in vitro dissolution methodologies for dry inhalation products, with particular emphasis on dry powder inhalers, where the dissolution behavior of the respirable particles can have a role on duration and absorption of the drug. Dissolution mechanisms of respirable particles as well as kinetic models have been presented. A more recent biorelevant dissolution set-ups and media for studying inhalation biopharmaceutics were also reviewed. In addition, factors affecting interplay between dissolution and absorption of deposited particles in the context of biopharmaceutical considerations of inhalation products were examined. Copyright © 2017 Elsevier B.V. All rights reserved.

48 CFR 34.005-6 - Full production.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Full production. 34.005-6... OF CONTRACTING MAJOR SYSTEM ACQUISITION General 34.005-6 Full production. Contracts for full production of successfully tested major systems selected from the full-scale development phase may be awarded...

Comparison of 3 in vivo methods for assessment of alcohol-based hand rubs.

PubMed

Edmonds-Wilson, Sarah; Campbell, Esther; Fox, Kyle; Macinga, David

2015-05-01

Alcohol-based hand rubs (ABHRs) are the primary method of hand hygiene in health-care settings. ICPs increasingly are assessing ABHR product efficacy data as improved products and test methods are developed. As a result, ICPs need better tools and recommendations for how to assess and compare ABHRs. Two ABHRs (70% ethanol) were tested according to 3 in vivo methods approved by ASTM International: E1174, E2755, and E2784. Log10 reductions were measured after a single test product use and after 10 consecutive uses at an application volume of 2 mL. The test method used had a significant influence on ABHR efficacy; however, in this study the test product (gel or foam) did not significantly influence efficacy. In addition, for all test methods, log10 reductions obtained after a single application were not predictive of results after 10 applications. Choice of test method can significantly influence efficacy results. Therefore, when assessing antimicrobial efficacy data of hand hygiene products, ICPs should pay close attention to the test method used, and ensure that product comparisons are made head to head in the same study using the same test methodology. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

1979-01-01

Work on process verification and tooling development continued. The cover process development was completed with the decision to proceed with low resin content prepreg material (34 + or - 3% by weight) in the fabrication of production readiness verification test (PRVT) specimens and the full-scale covers. The structural integrity of the cover/joint design was verified with the successful test of the cover attachment to fuselage ancillary test specimen (H25). Failure occurred, as predicted, in the skin panel away from the fuselage joint at 141 percent of the design ultimate load. With the successful completion of the H25 test, the PRVT cover specimens, which are identical to the H25 ancillary test specimen, were cleared for production. Eight of the twenty cover specimens were fabricated and are in preparation for test. All twenty of the PRVT spar specimens were fabricated and also were prepared for test. The environmental chambers used in the durability test of ten cover and ten spar PRVT specimens were completed and installed in the load reaction frames.

[Testing of medicinal products produced from pooled plasma].

PubMed

Unkelbach, U; Hunfeld, A; Breitner-Ruddock, S

2014-10-01

Medicinal products produced from human plasma fall under the administrative batch release procedure of the competent authority. In Germany, this has been carried out since 1995 by the Paul Ehrlich Institute (PEI), the responsible state control agency for blood products. Medicinal products released for the European and national market are tested for quality, efficacy and safety. Experimental testing of the final product and the starting materials, the plasma pools, as well as control of the production documentation guarantee a constantly high product safety. In the 28,000 batches tested since the beginning of the state controlled batch release testing of these blood products at the PEI, there has been no transmission of infectious viruses (HIV, HBV and HCV) to any patient. The batch release has made a contribution to the improvement of product quality. This procedure is still an important tool to ensure safety of blood products. The PEI is integrated in the batch release network of the European Directorate for the Quality of Medicines & Health Care (EDQM) in Strasbourg. Regulations and guidelines for official control authority batch release (OCABR) ensure harmonized procedures for mutual recognition of batch release on the European level. The EU certificates and German national certificates are requested and accepted in over 70 countries worldwide. Experimental testing in the EU and the requisite certificates have developed into a seal of quality for the world market.

Manufacturing development of DC-10 advanced rudder

NASA Technical Reports Server (NTRS)

Cominsky, A.

1979-01-01

The design, manufacture, and ground test activities during development of production methods for an advanced composite rudder for the DC-10 transport aircraft are described. The advanced composite aft rudder is satisfactory for airline service and a cost saving in a full production manufacturing mode is anticipated.

DEVELOPMENT OF A HAZARDOUS WASTE INCINERATOR TARGET ANALYTE LIST OF PRODUCTS OF INCOMPLETE COMBUSTION

EPA Science Inventory

The report gives results of pilot-scale incineration testing to develop a comprehensive list of products of incomplete combustion (PICs) from hazardous waste combustion (HWC) systems. Project goals were to: (1) identify the total mass of organic compounds sufficiently to estimate...

Exact test-based approach for equivalence test with parameter margin.

PubMed

Cassie Dong, Xiaoyu; Bian, Yuanyuan; Tsong, Yi; Wang, Tianhua

2017-01-01

The equivalence test has a wide range of applications in pharmaceutical statistics which we need to test for the similarity between two groups. In recent years, the equivalence test has been used in assessing the analytical similarity between a proposed biosimilar product and a reference product. More specifically, the mean values of the two products for a given quality attribute are compared against an equivalence margin in the form of ±f × σ R , where ± f × σ R is a function of the reference variability. In practice, this margin is unknown and is estimated from the sample as ±f × S R . If we use this estimated margin with the classic t-test statistic on the equivalence test for the means, both Type I and Type II error rates may inflate. To resolve this issue, we develop an exact-based test method and compare this method with other proposed methods, such as the Wald test, the constrained Wald test, and the Generalized Pivotal Quantity (GPQ) in terms of Type I error rate and power. Application of those methods on data analysis is also provided in this paper. This work focuses on the development and discussion of the general statistical methodology and is not limited to the application of analytical similarity.

Development of website for studying modern physics

NASA Astrophysics Data System (ADS)

Saehana, S.; Wahyono, U.; Darmadi, I. W.; Kendek, Y.; Widyawati, W.

2018-03-01

The purpose of this study is to produce a website in modern physics courses in order to increase student interest in physics learning. To determine the feasibility level of learning media then feasibility test to the product. The feasibility test carried out on the product is divided into three parts: material feasibility test, media feasibility test, and student response test. Based on the results of the test conducted the material obtained an average score of 3.72 and categorized very well. The result of media test that was obtained got the average score of 3.25 and categorized well. The result of the analysis of student's response to the twenty students of class A (fifth semester) of physics education program FKIP UniversitasTadulako obtained an average score of 3.16 with the good category. The results showed that the website developed can be used as one of the learning media that can support the learning process of students.

Building CHAOS: An Operating System for Livermore Linux Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garlick, J E; Dunlap, C M

2003-02-21

The Livermore Computing (LC) Linux Integration and Development Project (the Linux Project) produces and supports the Clustered High Availability Operating System (CHAOS), a cluster operating environment based on Red Hat Linux. Each CHAOS release begins with a set of requirements and ends with a formally tested, packaged, and documented release suitable for use on LC's production Linux clusters. One characteristic of CHAOS is that component software packages come from different sources under varying degrees of project control. Some are developed by the Linux Project, some are developed by other LC projects, some are external open source projects, and some aremore » commercial software packages. A challenge to the Linux Project is to adhere to release schedules and testing disciplines in a diverse, highly decentralized development environment. Communication channels are maintained for externally developed packages in order to obtain support, influence development decisions, and coordinate/understand release schedules. The Linux Project embraces open source by releasing locally developed packages under open source license, by collaborating with open source projects where mutually beneficial, and by preferring open source over proprietary software. Project members generally use open source development tools. The Linux Project requires system administrators and developers to work together to resolve problems that arise in production. This tight coupling of production and development is a key strategy for making a product that directly addresses LC's production requirements. It is another challenge to balance support and development activities in such a way that one does not overwhelm the other.« less

Comprehensive validation scheme for in situ fiber optics dissolution method for pharmaceutical drug product testing.

PubMed

Mirza, Tahseen; Liu, Qian Julie; Vivilecchia, Richard; Joshi, Yatindra

2009-03-01

There has been a growing interest during the past decade in the use of fiber optics dissolution testing. Use of this novel technology is mainly confined to research and development laboratories. It has not yet emerged as a tool for end product release testing despite its ability to generate in situ results and efficiency improvement. One potential reason may be the lack of clear validation guidelines that can be applied for the assessment of suitability of fiber optics. This article describes a comprehensive validation scheme and development of a reliable, robust, reproducible and cost-effective dissolution test using fiber optics technology. The test was successfully applied for characterizing the dissolution behavior of a 40-mg immediate-release tablet dosage form that is under development at Novartis Pharmaceuticals, East Hanover, New Jersey. The method was validated for the following parameters: linearity, precision, accuracy, specificity, and robustness. In particular, robustness was evaluated in terms of probe sampling depth and probe orientation. The in situ fiber optic method was found to be comparable to the existing manual sampling dissolution method. Finally, the fiber optic dissolution test was successfully performed by different operators on different days, to further enhance the validity of the method. The results demonstrate that the fiber optics technology can be successfully validated for end product dissolution/release testing. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

Taking a Concept to Commercialization: Designing Relevant Tests to Address Safety.

PubMed

Ferrara, Lisa A

2016-04-01

Taking a product from concept to commercialization requires careful navigation of the regulatory pathway through a series of steps: (A) moving the idea through proof of concept and beyond; (B) evaluating new technologies that may provide added value to the idea; (C) designing appropriate test strategies and protocols; and (D) evaluating and mitigating risks. Moving an idea from the napkin stage of development to the final product requires a team effort. When finished, the product rarely resembles the original design, but careful steps throughout the product life cycle ensure that the product meets the vision.

Comparison of the virucidal efficiency of peracetic acid, potassium monopersulfate and sodium hypochlorite on hepatitis A and enteric cytopathogenic bovine orphan virus.

PubMed

Martin, H; Soumet, C; Fresnel, R; Morin, T; Lamaudière, S; Le Sauvage, A L; Deleurme, K; Maris, P

2013-10-01

The virucidal activity of peroxy-products was evaluated and compared with sodium hypochlorite using the EN 14675 European suspension test and a surface test developed in our laboratory. The classical approach on infectivity of viruses was complemented with a prospective approach on virus genomes. Both infectivity tests were adapted and/or developed to determine the activity of disinfectants against reference bovine enterovirus type 1 [enteric cytopathogenic bovine orphan virus (ECBO)] and resistant hepatitis A virus (HAV) in conditions simulating practical use. Similar concentrations of active chlorine were virucidal against both viruses, either at 0·062% using the suspension test or at 0·50-1% using the surface test. However, for potassium monopersulfate and peracetic acid products, concentrations of approximately three times (3%) to 72 times (9%) higher were necessary against HAV than ECBO when determined with the suspension test. With the surface test, 4-8% peroxy-products were virucidal against HAV, either 16 times more peroxy-products concentrations than against ECBO. No significant impact on the targeted area of the viral genome measured by real-time RT-PCRs was obtained for ECBO and HAV suspensions treated with disinfectants, even with doses higher than the minimal virucidal concentrations. Sodium hypochlorite, but not peroxy-products, had similar activity against ECBO and HAV. No relation could be established between infectivity tests and genome destruction. This is the first comparative study that investigates with novel suspension and surface tests the reduction of infectivity and genome destruction of two resistant viruses by peroxy-compounds. The results and conclusions collected with European standards are discussed. © 2013 The Society for Applied Microbiology.

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

77 FR 14814 - Tobacco Product Analysis; Scientific Workshop; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-13

... work to develop tobacco reference products that are not currently available for laboratory use. Discuss... methods used to analyze tobacco products. FDA will invite speakers to address scientific and technical matters relating to the testing of tobacco reference products and the analytical methods used to measure...

40 CFR 91.1002 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... business for product development, production method assessment, or market promotion purposes. Testing exemption means an exemption which may be granted under § 91.1104(b) for the purpose of research...

CELBAN™: A 10-Year Retrospective Catherine Lewis & Blanche Kingdon

ERIC Educational Resources Information Center

Lewis, Catherine; Kingdom, Blanche

2016-01-01

This article provides a 10-year review by the test developers of the Canadian English Language Benchmark Assessment for Nurses (CELBAN™). From 2004 to 2014, the development, implementation, national administration, and operations of CELBAN and CELBAN-related products and services were the responsibility of the test developers and team at the…

Design and verification of bituminous mixtures with the increased content of reclaimed asphalt pavement

NASA Astrophysics Data System (ADS)

Bańkowski, Wojciech; Król, Jan; Gałązka, Karol; Liphardt, Adam; Horodecka, Renata

2018-05-01

Recycling of bituminous pavements is an issue increasingly being discussed in Poland. The analysis of domestic and foreign experience indicates a need to develop this technology in our country, in particular the hot feeding and production technologies. Various steps are being taken in this direction, including research projects. One of them is the InnGA project entitled: “Reclaimed asphalt pavement: Innovative technology of bituminous mixtures using material from reclaimed asphalt pavement”. The paper presents the results of research involving the design of bituminous mixtures in accordance with the required properties and in excess of the content of reclaimed asphalt permitted by the technical guidelines. It presents selected bituminous mixtures with the content of RAP of up to 50% and the results of tests from verification of industrial production of those mixtures. The article discusses the details of the design process of mixtures with a high content of reclaimed asphalt, the carried out production tests and discusses the results of tests under the verification of industrial production. Testing included basic tests according to the Polish technical requirements of WT- 2 and the extended functional testing. The conducted tests and analyses helped to determine the usefulness of the developed bituminous mixtures for use in experimental sections and confirmed the possibility of using an increased amount of reclaimed asphalt up to 50% in mixtures intended for construction of national roads.

Collaboration of chemistry instructional games and group investigation (Gi) model to improve learning outcome in high school students

NASA Astrophysics Data System (ADS)

Puspita, Ita; Sugiyarto, Kristian H.; Ikhsan, Jaslin

2017-05-01

The aims of this research are to: (1) develop chemistry instructional games on reaction rate matter; and (2) reveal the collaboration of chemistry instructional games and group investigation model to improvement learning outcome in high school student. This study is research and development (R&D). The procedure of developing product was adapted from Borg & Gall that modified into three principal steps: product planning, product developing, and product evaluating. The product planning step consist of field study, literature study, and manufacturing product. Product developing was developed product using Adobe Flash Professional CS 6 program. The last, product evaluating was performed by year XI of high school students, uses experimental methods nonequivalent control-group design by control class and experiment class. The results of this research show that: (1) a software of chemistry instructional games successfully developed using Adobe Flash Professional CS 6 and can be run on Android device; and (2) the test results of students showed that the collaboration of instructional games and group investigation model able to improvement learning outcome of hight school student.

Bar-HRM for Authentication of Plant-Based Medicines: Evaluation of Three Medicinal Products Derived from Acanthaceae Species

PubMed Central

Osathanunkul, Maslin; Madesis, Panagiotis; de Boer, Hugo

2015-01-01

Medicinal plants are used as a popular alternative to synthetic drugs, both in developed and developing countries. The economic importance of the herbal and natural supplement industry is increasing every year. As the herbal industry grows, consumer safety is one issue that cannot be overlooked. Herbal products in Thai local markets are commonly sold without packaging or labels. Plant powders are stored in large bags or boxes, and therefore buying local herbal products poses a high risk of acquiring counterfeited, substituted and/or adulterated products. Due to these issues, a reliable method to authenticate products is needed. Here DNA barcoding was used in combination with High Resolution Melting analysis (Bar-HRM) to authenticate three medicinal Acanthaceae species (Acanthus ebracteatus, Andrographis paniculata and Rhinacanthus nasutus) commonly used in Thailand. The rbcL barcode was selected for use in primers design for HRM analysis to produce standard melting profiles of the selected species. Melting data from the HRM assay using the designed rbcL primers showed that the three chosen species could be distinguished from each other. HRM curves of all fifteen test samples indicated that three of tested products did not contain the indicated species. Two closely related species (A. paniculata and R. nasutus), which have a high level of morphological similarity, were interchanged with one another in three tested products. Incorrect information on packaging and labels of the tested herbal products was the cause of the results shown here. Morphological similarity among the species of interest also hindered the collection process. The Bar-HRM method developed here proved useful in aiding in the identification and authentication of herbal species in processed samples. In the future, species authentication through Bar-HRM could be used to promote consumer trust, as well as raising the quality of herbal products. PMID:26011474

Bar-HRM for Authentication of Plant-Based Medicines: Evaluation of Three Medicinal Products Derived from Acanthaceae Species.

PubMed

Osathanunkul, Maslin; Madesis, Panagiotis; de Boer, Hugo

2015-01-01

Medicinal plants are used as a popular alternative to synthetic drugs, both in developed and developing countries. The economic importance of the herbal and natural supplement industry is increasing every year. As the herbal industry grows, consumer safety is one issue that cannot be overlooked. Herbal products in Thai local markets are commonly sold without packaging or labels. Plant powders are stored in large bags or boxes, and therefore buying local herbal products poses a high risk of acquiring counterfeited, substituted and/or adulterated products. Due to these issues, a reliable method to authenticate products is needed. Here DNA barcoding was used in combination with High Resolution Melting analysis (Bar-HRM) to authenticate three medicinal Acanthaceae species (Acanthus ebracteatus, Andrographis paniculata and Rhinacanthus nasutus) commonly used in Thailand. The rbcL barcode was selected for use in primers design for HRM analysis to produce standard melting profiles of the selected species. Melting data from the HRM assay using the designed rbcL primers showed that the three chosen species could be distinguished from each other. HRM curves of all fifteen test samples indicated that three of tested products did not contain the indicated species. Two closely related species (A. paniculata and R. nasutus), which have a high level of morphological similarity, were interchanged with one another in three tested products. Incorrect information on packaging and labels of the tested herbal products was the cause of the results shown here. Morphological similarity among the species of interest also hindered the collection process. The Bar-HRM method developed here proved useful in aiding in the identification and authentication of herbal species in processed samples. In the future, species authentication through Bar-HRM could be used to promote consumer trust, as well as raising the quality of herbal products.

Designing Interactive Electronic Module in Chemistry Lessons

NASA Astrophysics Data System (ADS)

Irwansyah, F. S.; Lubab, I.; Farida, I.; Ramdhani, M. A.

2017-09-01

This research aims to design electronic module (e-module) oriented to the development of students’ chemical literacy on the solution colligative properties material. This research undergoes some stages including concept analysis, discourse analysis, storyboard design, design development, product packaging, validation, and feasibility test. Overall, this research undertakes three main stages, namely, Define (in the form of preliminary studies); Design (designing e-module); Develop (including validation and model trial). The concept presentation and visualization used in this e-module is oriented to chemical literacy skills. The presentation order carries aspects of scientific context, process, content, and attitude. Chemists and multi media experts have done the validation to test the initial quality of the products and give a feedback for the product improvement. The feasibility test results stated that the content presentation and display are valid and feasible to be used with the value of 85.77% and 87.94%. These values indicate that this e-module oriented to students’ chemical literacy skills for the solution colligative properties material is feasible to be used.

High Temperature Ultrasonic Transducers : Material Selection and Testing

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Bruno, Alessandro

2012-01-01

The task of my two-months internship was to test different materials to be used to build an high temperature transducer, to develop some prototypes and to test their performance, to assess the reliability of commercial product rated for such a temperature, as well as to collaborate in developing the signal processing code to measure the condensed water levels.

Organizational Analysis of the United States Army Evaluation Center

DTIC Science & Technology

2014-12-01

analysis of qualitative or quantitative data obtained from design reviews, hardware inspections, M&S, hardware and software testing , metrics review... Research Development Test & Evaluation (RDT&E) appropriation account. The Defense Acquisition Portal ACQuipedia website describes RDT&E as “ one of the... research , design , development, test and evaluation, production, installation, operation, and maintenance; data collection; processing and analysis

Klamath Falls: High-Power Acoustic Well Stimulation Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Brian

Acoustic well stimulation (AWS) technology uses high-power sonic waves from specific frequency spectra in an attempt to stimulate production in a damaged or low-production wellbore. AWS technology is one of the most promising technologies in the oil and gas industry, but it has proven difficult for the industry to develop an effective downhole prototype. This collaboration between Klamath Falls Inc. and the Rocky Mountain Oilfield Testing Center (RMOTC) included a series of tests using high-power ultrasonic tools to stimulate oil and gas production. Phase I testing was designed and implemented to verify tool functionality, power requirements, and capacity of high-powermore » AWS tools. The purpose of Phase II testing was to validate the production response of wells with marginal production rates to AWS stimulation and to capture and identify any changes in the downhole environment after tool deployment. This final report presents methodology and results.« less

Research and development of energy-efficient appliance motor-compressors. Volume IV. Production demonstration and field test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Middleton, M.G.; Sauber, R.S.

Two models of a high-efficiency compressor were manufactured in a pilot production run. These compressors were for low back-pressure applications. While based on a production compressor, there were many changes that required production process changes. Some changes were performed within our company and others were made by outside vendors. The compressors were used in top mount refrigerator-freezers and sold in normal distribution channels. Forty units were placed in residences for a one-year field test. Additional compressors were built so that a life test program could be performed. The results of the field test reveal a 27.0% improvement in energy consumptionmore » for the 18 ft/sup 3/ high-efficiency model and a 15.6% improvement in the 21 ft/sup 3/ improvement in the 21 ft/sup 3/ high-efficiency model as compared to the standard production unit.« less

Two rapid pigmentation tests for identification of Cryptococcus neoformans.

PubMed Central

Kaufmann, C S; Merz, W G

1982-01-01

Two tests were developed for the rapid identification of Cryptococcus neoformans based on pigment produced by the organism's phenoloxidase activity. Caffeic acid was incorporated into cornmeal agar, a medium used routinely for yeast identification. When tested on this medium, only C. neoformans isolates produced brown pigment. All other yeasts maintained their normal morphology and did not produce the reaction product. A non-medium-based test was developed for same-day identification of C. neoformans isolates. Paper strips saturated with a buffered L-beta-3,4-dihydroxyphenylalanine-ferric citrate solution were inoculated with isolates and incubated at 37 degrees C. Pigment production occurred only with C. neoformans isolates, many within 60 to 90 min. All other yeasts remained negative. PMID:7040452

Development of advanced, continuous mild gasification process for the production of co-products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ness, R.O. Jr.; Aulich, T.R.

1991-05-01

The current objective of the University of North Dakota Energy and Environmental Research Center (EERC) mild gasification project is to optimize reaction char and marketable liquids production on a 100-lb/hr scale using Wyodak subbituminous and Indiana No. 3 bituminous coals. Tests performed using the EERC 100-lb/hr process development unit (PDU) include a refractory-cure (Test P001), a test using petroleum coke (Test P002), and tests using Wyodak and Indiana coals. The reactor system used for the 11 PDU tests conducted to date consists of a spouted, fluid-bed carbonizer equipped with an on-line condensation train that yields three boiling point fractions ofmore » coal liquids ranging in volatility from about (77{degrees}--750{degrees}F) (25{degrees}--400{degrees}C). The September--December 1990 quarterly report described reaction conditions and the bulk of the analytical results for Tests P010 and P011. This report describes further P010 and P011 analytical work, including the generation of simulated distillation curves for liquid samples on the basis of sulfur content, using gas chromatography coupled with atomic emission detection (GC/AED) analysis. 13 figs., 3 tabs.« less

The Product as Change Agent: The Process of Development.

ERIC Educational Resources Information Center

Bank, Adrianne

Instructional product development--the purpose of which has been to create materials which produce in an identified population of users demonstrable changes in behavior, in accordance with prespecified and specific objectives--generally adheres to a pattern which includes planning, formulating, prototyping measures and materials, field testing,…

Creativity and Brain-Functioning in Product Development Engineers: A Canonical Correlation Analysis

ERIC Educational Resources Information Center

Travis, Frederick; Lagrosen, Yvonne

2014-01-01

This study used canonical correlation analysis to explore the relation among scores on the Torrance test of figural and verbal creativity and demographic, psychological and physiological measures in Swedish product-development engineers. The first canonical variate included figural and verbal flexibility and originality as dependent measures and…

Lexical development of noun and predicate comprehension and production in isiZulu

PubMed Central

Ahmed, Saaliha

2016-01-01

This study seeks to investigate the development of noun and predicate comprehension and production in isiZulu-speaking children between the ages of 25 and 36 months. It compares lexical comprehension and production in isiZulu, using an Italian developed and validated vocabulary assessment tool: The Picture Naming Game (PiNG) developed by Bello, Giannantoni, Pettenati, Stefanini and Caselli (2012). The PiNG tool includes four subtests, one each for subnoun comprehension (NC), noun production (NP), predicate comprehension (PC), and predicate production (PP). Children are shown these lexical items and then asked to show comprehension and produce certain lexical items. After adaptation into the South African context, the adapted version of PiNG was used to directly assess the lexical development of isiZulu with the three main objectives to (1) test the efficiency of the adaptation of a vocabulary tool to measure isiZulu comprehension and production development, (2) test previous findings done in many cross-linguistic comparisons that have found that both comprehension and production performance increase with age for a lesser-studied language, and (3) present our findings around the comprehension and production of the linguistic categories of nouns and predicates. An analysis of the results reported in this study show an age effect throughout the entire sample. Across all the age groups, the comprehension of the noun and predicate subtests was better performed than the production of noun and predicate subtests. With regard to lexical items, the responses of children showed an influence of various factors, including the late acquisition of items, possible problems with stimuli presented to them, and the possible input received by the children from their home environment. PMID:27542416

Lexical development of noun and predicate comprehension and production in isiZulu.

PubMed

Nicolas, Ramona Kunene; Ahmed, Saaliha

2016-07-28

This study seeks to investigate the development of noun and predicate comprehension and production in isiZulu-speaking children between the ages of 25 and 36 months. It compares lexical comprehension and production in isiZulu, using an Italian developed and validated vocabulary assessment tool: The Picture Naming Game (PiNG) developed by Bello, Giannantoni, Pettenati, Stefanini and Caselli (2012). The PiNG tool includes four subtests, one each for subnoun comprehension (NC), noun production (NP), predicate comprehension (PC), and predicate production (PP). Children are shown these lexical items and then asked to show comprehension and produce certain lexical items. After adaptation into the South African context, the adapted version of PiNG was used to directly assess the lexical development of isiZulu with the three main objectives to (1) test the efficiency of the adaptation of a vocabulary tool to measure isiZulu comprehension and production development, (2) test previous findings done in many cross-linguistic comparisons that have found that both comprehension and production performance increase with age for a lesser-studied language, and (3) present our findings around the comprehension and production of the linguistic categories of nouns and predicates. An analysis of the results reported in this study show an age effect throughout the entire sample. Across all the age groups, the comprehension of the noun and predicate subtests was better performed than the production of noun and predicate subtests. With regard to lexical items, the responses of children showed an influence of various factors, including the late acquisition of items, possible problems with stimuli presented to them, and the possible input received by the children from their home environment.

Acanthamoeba: An Overview of the Challenges to the Development of a Consensus Methodology of Disinfection Efficacy Testing for Contact Lens Care Products.

PubMed

Brocious, Jeffrey; Tarver, Michelle E; Hampton, Denise; Eydelman, Malvina

2018-04-24

With the increasing incidence of more pathogens that can cause microbial keratitis (MK), it is necessary to periodically reassess disinfection multipurpose solutions testing requirements to ensure that relevant organisms to challenge them are being used. Current testing protocols have included common pathogens such as Pseudomonas aeruginosa, Staphylococcus aureus, Serratia marcescens, Candida albicans, and Fusarium solani but have omitted less common pathogens such as Acanthamoeba. Specifically, Acanthamoeba sp. has recently been identified as a prevalent cause of MK in certain countries. Developing an appropriate protocol for this unique organism presents a challenge, given its two distinct life stages, methods to grow the organism, encystment techniques, and many other parameters that can affect testing outcomes. Therefore, the appropriate combination of these parameters is crucial to developing a protocol that ensures consistent, accurate results. The FDA has recognized the importance of establishing a standardized testing protocol for this pathogen and embarked on research efforts to provide a recommended testing protocol for testing contact lens care products.

Earthquake Early Warning ShakeAlert System: Testing and certification platform

USGS Publications Warehouse

Cochran, Elizabeth S.; Kohler, Monica D.; Given, Douglas; Guiwits, Stephen; Andrews, Jennifer; Meier, Men-Andrin; Ahmad, Mohammad; Henson, Ivan; Hartog, Renate; Smith, Deborah

2017-01-01

Earthquake early warning systems provide warnings to end users of incoming moderate to strong ground shaking from earthquakes. An earthquake early warning system, ShakeAlert, is providing alerts to beta end users in the western United States, specifically California, Oregon, and Washington. An essential aspect of the earthquake early warning system is the development of a framework to test modifications to code to ensure functionality and assess performance. In 2016, a Testing and Certification Platform (TCP) was included in the development of the Production Prototype version of ShakeAlert. The purpose of the TCP is to evaluate the robustness of candidate code that is proposed for deployment on ShakeAlert Production Prototype servers. TCP consists of two main components: a real‐time in situ test that replicates the real‐time production system and an offline playback system to replay test suites. The real‐time tests of system performance assess code optimization and stability. The offline tests comprise a stress test of candidate code to assess if the code is production ready. The test suite includes over 120 events including local, regional, and teleseismic historic earthquakes, recentering and calibration events, and other anomalous and potentially problematic signals. Two assessments of alert performance are conducted. First, point‐source assessments are undertaken to compare magnitude, epicentral location, and origin time with the Advanced National Seismic System Comprehensive Catalog, as well as to evaluate alert latency. Second, we describe assessment of the quality of ground‐motion predictions at end‐user sites by comparing predicted shaking intensities to ShakeMaps for historic events and implement a threshold‐based approach that assesses how often end users initiate the appropriate action, based on their ground‐shaking threshold. TCP has been developed to be a convenient streamlined procedure for objectively testing algorithms, and it has been designed with flexibility to accommodate significant changes in development of new or modified system code. It is expected that the TCP will continue to evolve along with the ShakeAlert system, and the framework we describe here provides one example of how earthquake early warning systems can be evaluated.

76 FR 1349 - Airworthiness Directives; Cessna Aircraft Company (Cessna) (Type Certificate A00003SE Previously...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-10

... failure in the wing during a production acceptance flight test. We are issuing this AD to prevent... acceptance flight test. The wing skin disbonded from the upper forward wing spar. The length of the disbond... exist or develop in other products of the same type design. AD Requirements This AD requires obtaining...

Reaction-to-fire testing and modeling for wood products

Treesearch

Mark A. Dietenberger; Robert H. White

2001-01-01

In this review we primarily discuss our use of the oxygen consumption calorimeter (ASTM E1354 for cone calorimeter and ISO9705 for room/corner tests) and fire growth modeling to evaluate treated wood products. With recent development towards performance-based building codes, new methodology requires engineering calculations of various fire growth scenarios. The initial...

Competency Test Items for Applied Principles of Agribusiness and Natural Resources Occupations. Agricultural Production Component. A Report of Research.

ERIC Educational Resources Information Center

Cheek, Jimmy G.; McGhee, Max B.

An activity was undertaken to develop written criterion-referenced tests for the agricultural production component of Applied Principles of Agribusiness and Natural Resources Occupations. Intended for tenth grade students who have completed Fundamentals of Agribusiness and Natural Resources Occupations, applied principles were designed to consist…

The effect of sea-water and fresh-water soaking on the hedonic test of Eucheuma sp. syrup and pudding

NASA Astrophysics Data System (ADS)

Novianty, H.; Herandarudewi, S. M. C.

2018-04-01

Seaweed is a non-fishery marine commodity that has great opportunities to be developed in Indonesia. One of the seaweed with a high economic value is Eucheuma alvarezii. This seaweed can be used as an additional material in cosmetic and pharmaceutical products or directly used for syrup and pudding. Post-harvest technique conducted by the seaweed farmers will affects the quality of dried and processed products. The purpose of this study is to see the effect of post harvest technique on the quality of dried seaweed and hedonic test (favorable test) of processed product (syrup and pudding). This study was conducted using descriptive method. The study compared dried, syrup, and puddings from two differents post-harvest technique, between salt and fresh-water draining products. The results showed that fresh-water draining technique obtained better quality results organoleptic test. Supported by hedonic test, that showed more panelists were prefered the fresh-water drained products of syrup and pudding. The preference were much higher for the fresh-water drained products in all three catagories of color, taste, and smell.

The evaluation of the optimization design and application effect of same-well-injection-production technique’s injection-production circulatory system

NASA Astrophysics Data System (ADS)

Guoxing, Zheng; Minghu, Jiang; Hongliang, Gong; Nannan, Zhang; Jianguang, Wei

2018-02-01

According to basic principles of combining series of strata and demands of same-well injection-production technique, the optimization designing method of same-well injection-production technique’s injection-production circulatory system is given. Based on oil-water two-phase model with condition of arbitrarily well network, a dynamic forecast method for the application of same-well injection-production reservoir is established with considering the demands and capacity of same-well injection-production technique, sample wells are selected to launch the forecast evaluation and analysis of same-well injection-production reservoir application’s effect. Results show: single-test-well composite water cut decreases by 4.7% and test-well-group composite water cut decreases by 1.56% under the condition of basically invariant ground water injection rate. The method provides theoretical support for the proof of same-well injection-production technique’s reservoir development improving effect and further tests.

Saving two birds with one stone: using active substance avian acute toxicity data to predict formulated plant protection product toxicity.

PubMed

Maynard, Samuel K; Edwards, Peter; Wheeler, James R

2014-07-01

Environmental safety assessments for exposure of birds require the provision of acute avian toxicity data for both the pesticidal active substance and formulated products. As an example, testing on the formulated product is waived in Europe using an assessment of data for the constituent active substance(s). This is often not the case globally, because some countries require acute toxicity tests with every formulated product, thereby triggering animal welfare concerns through unnecessary testing. A database of 383 formulated products was compiled from acute toxicity studies conducted with northern bobwhite (Colinus virginianus) or Japanese quail (Coturnix japonica) (unpublished regulatory literature). Of the 383 formulated products studied, 159 contained only active substances considered functionally nontoxic (median lethal dose [LD50] > highest dose tested). Of these, 97% had formulated product LD50 values of >2000 mg formulated product/kg (limit dose), indicating that no new information was obtained in the formulated product study. Furthermore, defined (point estimated) LD50 values for formulated products were compared with LD50 values predicted from toxicity of the active substance(s). This demonstrated that predicted LD50 values were within 2-fold and 5-fold of the measured formulated product LD50 values in 90% and 98% of cases, respectively. This analysis demonstrates that avian acute toxicity testing of formulated products is largely unnecessary and should not be routinely required to assess avian acute toxicity. In particular, when active substances are known to be functionally nontoxic, further formulated product testing adds no further information and unnecessarily increases bird usage in testing. A further analysis highlights the fact that significant reductions (61% in this dataset) could be achieved by using a sequential testing design (Organisation for Economic Co-operation and Development test guideline 223), as opposed to established single-stage designs. © 2014 The Authors.

77 FR 72924 - Taxable Medical Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... as devices by the FDA Center for Biologics Evaluation and Research (CBER). In general, CBER licenses... designed to implant a particular orthopedic joint; (iv) testing and development products; and (v) product...

47 CFR 6.7 - Product design, development, and evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... factors, as the manufacturer deems appropriate: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot...

47 CFR 6.7 - Product design, development, and evaluation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... factors, as the manufacturer deems appropriate: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot...

Testing Product Generation in Software Product Lines Using Pairwise for Features Coverage

NASA Astrophysics Data System (ADS)

Pérez Lamancha, Beatriz; Polo Usaola, Macario

A Software Product Lines (SPL) is "a set of software-intensive systems sharing a common, managed set of features that satisfy the specific needs of a particular market segment or mission and that are developed from a common set of core assets in a prescribed way". Variability is a central concept that permits the generation of different products of the family by reusing core assets. It is captured through features which, for a SPL, define its scope. Features are represented in a feature model, which is later used to generate the products from the line. From the testing point of view, testing all the possible combinations in feature models is not practical because: (1) the number of possible combinations (i.e., combinations of features for composing products) may be untreatable, and (2) some combinations may contain incompatible features. Thus, this paper resolves the problem by the implementation of combinatorial testing techniques adapted to the SPL context.

Indoor Exposure Product Testing Protocols Version 2

EPA Science Inventory

EPA’s Office of Pollution Prevention and Toxics (OPPT) has developed a set of ten indoor exposure testing protocols intended to provide information on the purpose of the testing, general description of the sampling and analytical procedures, and references for tests that will be ...

Green toxicology.

PubMed

Maertens, Alexandra; Anastas, Nicholas; Spencer, Pamela J; Stephens, Martin; Goldberg, Alan; Hartung, Thomas

2014-01-01

Historically, early identification and characterization of adverse effects of industrial chemicals was difficult because conventional toxicological test methods did not meet R&D needs for rapid, relatively inexpensive methods amenable to small amounts of test material. The pharmaceutical industry now front-loads toxicity testing, using in silico, in vitro, and less demanding animal tests at earlier stages of product development to identify and anticipate undesirable toxicological effects and optimize product development. The Green Chemistry movement embraces similar ideas for development of less toxic products, safer processes, and less waste and exposure. Further, the concept of benign design suggests ways to consider possible toxicities before the actual synthesis and to apply some structure/activity rules (SAR) and in silico methods. This requires not only scientific development but also a change in corporate culture in which synthetic chemists work with toxicologists. An emerging discipline called Green Toxicology (Anastas, 2012) provides a framework for integrating the principles of toxicology into the enterprise of designing safer chemicals, thereby minimizing potential toxicity as early in production as possible. Green Toxicology`s novel utility lies in driving innovation by moving safety considerations to the earliest stage in a chemical`s lifecycle, i.e., to molecular design. In principle, this field is no different than other subdisciplines of toxicology that endeavor to focus on a specific area - for example, clinical, environmental or forensic toxicology. We use the same principles and tools to evaluate an existing substance or to design a new one. The unique emphasis is in using 21st century toxicology tools as a preventative strategy to "design out" undesired human health and environmental effects, thereby increasing the likelihood of launching a successful, sustainable product. Starting with the formation of a steering group and a series of workshops, the Green Toxicology concept is currently spreading internationally and is being refined via an iterative process.

Cleansing lotion containing tamarind fruit pulp extract. II. Study of cumulative irritation effects in human.

PubMed

Maenthaisong, Ratree; Viyoch, Jarupa; Chaiyakunapruk, Nathorn; Warnnissorn, Prateep

2007-09-01

Cleansing lotion containing extract of tamarind fruit pulp was developed to provide skin a lighter effect. Skin irritation may occur due to keratolytic effect of alpha-hydroxyl acids (AHA) in the tamarind fruit pulp extract. To assess the cumulative irritation effect of cleansing lotion containing tamarind fruit extract with 2% (w/w) tartaric acid on human skin compared with placebo product and de-ionized water. The study design was a single-blinded, randomized side of arm, and controlled study. Three samples, including test product, placebo product, and de-ionized water, were repeatedly applied on the inner forearm of 15 healthy females (aged 28.3 +/- 3.1 years) for 30 min daily for 5 days under semi-occlusive patch. Skin irritation was measured by using visual scoring and instruments such as Tewameter and Mexameter. All measurements were done before application of samples every day from day 1 until day 5. Final measurements were done after the last application for 3 days (day 8). The results obtained from the visual scoring scale indicated no irritation signs and symptoms of test product. Mean differences of transepidermal water loss and erythema values between test product and de-ionized water and between test and placebo products were not statistically significant (P > 0.05). These findings indicate a preliminary safety evidence of our developed cleansing lotion containing the natural AHAs and can be used as cumulative evidence for supporting the future home use study of this product in human.

Scaling up HIV self-testing in sub-Saharan Africa: a review of technology, policy and evidence.

PubMed

Indravudh, Pitchaya P; Choko, Augustine T; Corbett, Elizabeth L

2018-02-01

HIV self-testing (HIVST) can provide complementary coverage to existing HIV testing services and improve knowledge of status among HIV-infected individuals. This review summarizes the current technology, policy and evidence landscape in sub-Saharan Africa and priorities within a rapidly evolving field. HIVST is moving towards scaled implementation, with the release of WHO guidelines, WHO prequalification of the first HIVST product, price reductions of HIVST products and a growing product pipeline. Multicountry evidence from southern and eastern Africa confirms high feasibility, acceptability and accuracy across many delivery models and populations, with minimal harms. Evidence on the effectiveness of HIVST on increased testing coverage is strong, while evidence on demand generation for follow-on HIV prevention and treatment services and cost-effective delivery is emerging. Despite these developments, HIVST delivery remains limited outside of pilot implementation. Important technology gaps include increasing availability of more sensitive HIVST products in low and middle-income countries. Regulatory and postmarket surveillance systems for HIVST also require further development. Randomized trials evaluating the effectiveness and cost-effectiveness under multiple distribution models, including unrestricted delivery and with a focus on linkage to HIV prevention and treatment, remain priorities. Diversification of studies from west and central Africa and around blood-based products should be addressed.

High-voltage leak detection of a parenteral proteinaceous solution product packaged in form-fill-seal plastic laminate bags. Part 1. Method development and validation.

PubMed

Damgaard, Rasmus; Rasmussen, Mats; Buus, Peter; Mulhall, Brian; Guazzo, Dana Morton

2013-01-01

In Part 1 of this three-part research series, a leak test performed using high-voltage leak detection (HVLD) technology, also referred to as an electrical conductivity and capacitance leak test, was developed and validated for container-closure integrity verification of a small-volume laminate plastic bag containing an aqueous solution for injection. The sterile parenteral product is the rapid-acting insulin analogue, insulin aspart (NovoRapid®/NovoLog®, by Novo Nordisk A/S, Bagsværd, Denmark). The aseptically filled and sealed package is designed to preserve product sterility through expiry. Method development and validation work incorporated positive control packages with a single hole laser-drilled through the laminate film of each bag. A unique HVLD method characterized by specific high-voltage and potentiometer set points was established for testing bags positioned in each of three possible orientations as they are conveyed through the instrument's test zone in each of two possible directions-resulting in a total of six different test method options. Validation study results successfully demonstrated the ability of all six methods to accurately and reliably detect those packages with laser-drilled holes from 2.5-11.2 μm in nominal diameter. Part 2 of this series will further explore HVLD test results as a function of package seal and product storage variables. The final Part 3 will report the impact of HVLD exposure on product physico-chemical stability. In this Part 1 of a three-part research series, a leak test method based on electrical conductivity and capacitance, called high voltage leak detection (HVLD), was used to find leaks in small plastic bags filled with an insulin pharmaceutical solution for human injection by Novo Nordisk A/S (Bagsværd, Denmark). To perform the test, the package is electrically grounded while being conveyed past an electrode linked to a high-voltage, low-amperage transformer. The instrument measures the current that passes from the transformer to the electrode, through the packaged product and along the package walls, to the ground. Plastic packages without defect are relatively nonconductive and yield a low voltage reading; a leaking package with electrically conductive solution located in or near the leak triggers a spike in voltage reading. Test methods were optimized and validated, enabling the detection of leaking packages with holes as small as 2.5 μm in diameter. Part 2 of this series will further explore HVLD test results as a function of package seal and product storage variables. The final Part 3 will report the impact of HVLD exposure on product stability.

Development and Application of a Test for Food-Induced Emotions.

PubMed

Geier, Uwe; Büssing, Arndt; Kruse, Pamela; Greiner, Ramona; Buchecker, Kirsten

2016-01-01

This study aimed to develop a test to measure food-induced emotions suitable for stable food and beverages. All of the experiments were conducted under the conditions of a consumer sensory evaluation according to German standard DIN 10974. Test development included descriptors' derivation and factor analysis as well as a comparison between the new test (empathic food test, EFT) and a hedonic sensory test and an unspecific psychological test, known as a multidimensional mood questionnaire (MDMQ). Nineteen sensory experts derived twelve items using free-choice profiling. After an exploratory factor analyses, ten of the intended twelve items were integrated into two scales. To compare the new questionnaire (EFT) to the MDMQ and a hedonic test, panels of 59 (EFT), 64 (MDMQ) and 63 (hedonic sensory test) untrained individuals described their perceptions after consuming sensorially similar pairs of milk, water, bread and sugar. The benchmark of comparison was the power to discriminate between the food pairs. Test-retest replicability was demonstrated. All three tests presented slight differences in sample preference and effect size depending on the offered products. These findings underscore the need to test new methods with a wide range of products. Further research is needed to investigate the relationship between sensorial perception and emotional response.

Development and Application of a Test for Food-Induced Emotions

PubMed Central

Geier, Uwe; Büssing, Arndt; Kruse, Pamela; Greiner, Ramona; Buchecker, Kirsten

2016-01-01

This study aimed to develop a test to measure food-induced emotions suitable for stable food and beverages. All of the experiments were conducted under the conditions of a consumer sensory evaluation according to German standard DIN 10974. Test development included descriptors’ derivation and factor analysis as well as a comparison between the new test (empathic food test, EFT) and a hedonic sensory test and an unspecific psychological test, known as a multidimensional mood questionnaire (MDMQ). Nineteen sensory experts derived twelve items using free-choice profiling. After an exploratory factor analyses, ten of the intended twelve items were integrated into two scales. To compare the new questionnaire (EFT) to the MDMQ and a hedonic test, panels of 59 (EFT), 64 (MDMQ) and 63 (hedonic sensory test) untrained individuals described their perceptions after consuming sensorially similar pairs of milk, water, bread and sugar. The benchmark of comparison was the power to discriminate between the food pairs. Test-retest replicability was demonstrated. All three tests presented slight differences in sample preference and effect size depending on the offered products. These findings underscore the need to test new methods with a wide range of products. Further research is needed to investigate the relationship between sensorial perception and emotional response. PMID:27861503

Safety assessment of enzyme-containing personal cleansing products: exposure characterization and development of IgE antibody to enzymes after a 6-month use test.

PubMed

Kelling, C K; Bartolo, R G; Ertel, K D; Smith, L A; Watson, D D; Sarlo, K

1998-02-01

Enzyme-containing personal cleansing products were being considered for the consumer market. Although enzymes have been marketed safely for many years as ingredients in laundry products, their use in a personal cleansing application represented a new type of exposure for consumers that was not supported by the historical safety data. An exposure assessment and additional safety data would be needed before marketing to ensure consumer safety. The work in this paper was designed to evaluate the potential for inhalation exposure to the enzyme during use of this new product while showering. Then a clinical trial was conducted to determine whether or not the level, duration, and routes of exposure encountered during use of this product would induce a Type I sensitization response to the enzyme. Exposure was assessed during normal showering activities by collecting air samples with both high volume and personal samplers and quantitating enzyme levels with an ELISA. To assess the potential for sensitization, panelists were asked to use a prototype protease-containing bar product for all personal cleansing tasks and to keep a use diary reporting any associated symptoms. Physical and dermatologic examinations and skin prick tests with enzyme were conducted before the test commenced and at 2-month intervals. Exposure assessment results showed that airborne enzyme levels were primarily dependent on the concentration of the enzyme in the personal cleansing product. Mean values for total airborne enzyme protein ranged from 5.7 to 11.8 ng/m3 when enzyme concentration, time of use, and measurement technique remained constant. After 6 months of at-home product use, four of 61 test subjects using the enzyme-containing bar had positive skin prick test responses when tested with the enzyme. The skin prick test data were supplemented with serologic analyses, which detected IgE specific for the protease enzyme. None of these subjects showed any clinical symptoms indicative of allergic reaction. The ability of enzymes to induce development of allergic antibodies in this study led to the conclusion that this prototype enzyme-containing personal cleansing bar would represent an inappropriate use of enzymes in a consumer product application. The likelihood of both induction of an immunologic response and subsequent elicitation of allergy symptoms in a small but significant fraction of the user population was high. This finding resulted in the decision to halt further development of this prototype.

A three-prong strategy to develop functional food using protein isolates recovered from chicken processing by-products with isoelectric solubilization/precipitation.

PubMed

Tahergorabi, Reza; Sivanandan, Litha; Beamer, Sarah K; Matak, Kristen E; Jaczynski, Jacek

2012-09-01

Skin-on bone-in chicken drumsticks were processed with isoelectric solubilization/precipitation to recover muscle proteins. The drumsticks were used as a model for dark chicken meat processing by-products. The main objective of this study was conversion of dark chicken meat processing by-products to restructured functional food product. An attempt was made to develop functional food product that would resemble respective product made from boneless skinless chicken breast meat. A three-prong strategy to address diet-driven cardiovascular disease (CVD)with a functional food was used in this study. The strategy included addition of three ingredients with well-documented cardiovascular benefits: (i) ω-3 polyunsaturated fatty acid-rich oil (flaxseed-algae, 9:1); (ii) soluble fiber; and (iii) salt substitute. Titanium dioxide, potato starch, polyphosphate, and transglutaminase were also added. The batters were formulated and cooked resulting in heat-set gels. Color (L*a*b*), texture (torsion test, Kramer shear test, and texture profile analysis), thermal denaturation (differential scanning calorimetry), and gelation (dynamic rheology) of chicken drumstick gels and chicken breast gels were determined and compared. Chicken drumstick gels generally had comparable color and texture properties to the gels made from chicken breast meat. The endothermic transition (thermal denaturation) of myosin was more pronounced and gelation properties were better for the drumstick gels. This study demonstrated a feasibility to develop functional food made of muscle proteins recovered with isoelectric solubilization/precipitation from low-value dark chicken meat processing by-products. The functional food developed in this study was enriched with CVD-beneficial nutrients and had comparable instrumental quality attributes to respective products made of chicken breast meat. Although the results of this study point towards the potential for a novel, marketable functional food product, sensory tests and storage stability study are recommended. Copyright © 2012 Society of Chemical Industry.

HTGR fuels and core development program. Quarterly progress report for the period ending August 31, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1975-09-30

Studies of reactions between core materials and coolant impurities, basic fission product transport mechanisms, core graphite development and testing, the development and testing of recyclable fuel systems, and physics and fuel management studies are described. Materials studies include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and, where appropriate, the data are presented in tables, graphs, and photographs. (auth)

36 CFR 1193.23 - Product design, development, and evaluation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... following factors, as the manufacturer deems appropriate: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot...

An Analysis Of Additive Manufacturing Production Problems And Solutions

DTIC Science & Technology

2016-12-01

democratization of manufacturing (Hornick, 2015). AM has three distinct advantages over subtractive manufacturing : product customization, design flexibility...58 develops software and other technology solutions for the design , analysis, testing, manufacture , and validation of products (Diane Ryan, personal...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT AN ANALYSIS OF ADDITIVE MANUFACTURING PRODUCTION

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

USGS Publications Warehouse

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

STATISTICAL ANALYSIS OF SNAP 10A THERMOELECTRIC CONVERTER ELEMENT PROCESS DEVELOPMENT VARIABLES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fitch, S.H.; Morris, J.W.

1962-12-15

Statistical analysis, primarily analysis of variance, was applied to evaluate several factors involved in the development of suitable fabrication and processing techniques for the production of lead telluride thermoelectric elements for the SNAP 10A energy conversion system. The analysis methods are described as to their application for determining the effects of various processing steps, estabIishing the value of individual operations, and evaluating the significance of test results. The elimination of unnecessary or detrimental processing steps was accomplished and the number of required tests was substantially reduced by application of these statistical methods to the SNAP 10A production development effort. (auth)

Geometry in flipbook multimedia, a role of technology to improve mathematics learning quality: the case in madiun, east java

NASA Astrophysics Data System (ADS)

Andini, S.; Fitriana, L.; Budiyono

2018-04-01

This research is aimed to describe the process and to get product development of learning material using flipbook. The learning material is developed in geometry, especially quadrilateral. This research belongs to Research and Development (R&D). The procedure includes the steps of Budiyono Model such as conducting preliminary research, planning and developing a theoretical and prototype product, and determining product quality (validity, practicality, and effectiveness). The average assessment result of the theoretical product by the experts gets 4,54, while validity result of prototype product by the experts is 4,62. Practicability is obtained by the implementation of flipbook prototype in each meeting of limited-scale try out based on learning observation, with the average score of 4,10 and increasing of 4,50 in wide-scale try out. The effectiveness of the prototype product is obtained by the result from pretest and posttest on a limited-scale and a wide-scale try out. The limited-scale pre-test result showed a significant increase in average score of wide-scale pre-test of 25,2, and there is an increase in the average score of posttest on limited-scale try out and wide-scale try out is 8,16. The result of product quality can be concluded that flipbook media can be used in the geometry learning in elementary school which implemented curriculum 2013.

In vitro assessment of skin irritation potential of surfactant-based formulations by using a 3-D skin reconstructed tissue model and cytokine response.

PubMed

Walters, Russel M; Gandolfi, Lisa; Mack, M Catherine; Fevola, Michael; Martin, Katharine; Hamilton, Mathew T; Hilberer, Allison; Barnes, Nicole; Wilt, Nathan; Nash, Jennifer R; Raabe, Hans A; Costin, Gertrude-Emilia

2016-12-01

The personal care industry is focused on developing safe, more efficacious, and increasingly milder products, that are routinely undergoing preclinical and clinical testing before becoming available for consumer use on skin. In vitro systems based on skin reconstructed equivalents are now established for the preclinical assessment of product irritation potential and as alternative testing methods to the classic Draize rabbit skin irritation test. We have used the 3-D EpiDerm™ model system to evaluate tissue viability and primary cytokine interleukin-1α release as a way to evaluate the potential dermal irritation of 224 non-ionic, amphoteric and/or anionic surfactant-containing formulations, or individual raw materials. As part of our testing programme, two representative benchmark materials with known clinical skin irritation potential were qualified through repeated testing, for use as references for the skin irritation evaluation of formulations containing new surfactant ingredients. We have established a correlation between the in vitro screening approach and clinical testing, and are continually expanding our database to enhance this correlation. This testing programme integrates the efforts of global manufacturers of personal care products that focus on the development of increasingly milder formulations to be applied to the skin, without the use of animal testing. 2016 FRAME.

Development of a preprototype times wastewater recovery subsystem, addendum

NASA Technical Reports Server (NTRS)

Dehner, G. F.

1984-01-01

Six tasks are described reflecting subsystem hardware and software modifications and test evaluation of a TIMES wastewater recovery subsystem. The overall results are illustrated in a figure which shows the water production rate, the specific energy corrected to 26.5 VDC, and the product water conductivity at various points in the testing. Four tasks are described reflecting studies performed to develop a preliminary design concept for a next generation TIMES. The overall results of the study are the completion of major design analyses and preliminary configuration layout drawings.

Advanced composite elevator for Boeing 727 aircraft, volume 2

NASA Technical Reports Server (NTRS)

Chovil, D. V.; Grant, W. D.; Jamison, E. S.; Syder, H.; Desper, O. E.; Harvey, S. T.; Mccarty, J. E.

1980-01-01

Preliminary design activity consisted of developing and analyzing alternate design concepts and selecting the optimum elevator configuration. This included trade studies in which durability, inspectability, producibility, repairability, and customer acceptance were evaluated. Preliminary development efforts consisted of evaluating and selecting material, identifying ancillary structural development test requirements, and defining full scale ground and flight test requirements necessary to obtain Federal Aviation Administration (FAA) certification. After selection of the optimum elevator configuration, detail design was begun and included basic configuration design improvements resulting from manufacturing verification hardware, the ancillary test program, weight analysis, and structural analysis. Detail and assembly tools were designed and fabricated to support a full-scope production program, rather than a limited run. The producibility development programs were used to verify tooling approaches, fabrication processes, and inspection methods for the production mode. Quality parts were readily fabricated and assembled with a minimum rejection rate, using prior inspection methods.

Labor Productivity Standards in Texas School Foodservice Operations

ERIC Educational Resources Information Center

Sherrin, A. Rachelle; Bednar, Carolyn; Kwon, Junehee

2009-01-01

Purpose: Purpose of this research was to investigate utilization of labor productivity standards and variables that affect productivity in Texas school foodservice operations. Methods: A questionnaire was developed, validated, and pilot tested, then mailed to 200 randomly selected Texas school foodservice directors. Descriptive statistics for…

76 FR 4091 - Proposed Information Collection; Comment Request; Certification Requirements for NOAA's...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... Collection; Comment Request; Certification Requirements for NOAA's Hydrographic Product Quality Assurance... hydrographic products are proposed for certification; by which standards and compliance tests are developed, adopted, and applied for those products; and by which certification is awarded or denied. These procedures...

Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures

NASA Astrophysics Data System (ADS)

Raad Hussein, Alaa; Badri Albarody, Thar M.; Megat Yusoff, Puteri Sri Melor Bt

2018-05-01

Nowadays there is no viable non-destructive method that could detect flaws in complex composite products. Such a method could provide unique tools to allow engineers to minimize time consumption and cost during the evaluation of various product parameters without disturbing production. The latest research and development on propagation waves introduce micro, radio and millimetre waves as new potential non-destructive test methods for evaluation of mechanical flaws and prediction of failure in a product during production. This paper focuses on recent developments, usage, classification of electromagnetic waves under the range of radio frequency, millimetre and micro-waves. In addition, this paper reviews the application of propagation wave and proposed a new health monitoring technique based on Doppler Effect for vibration measurement in complex composite structures. Doppler Effect is influenced by dynamic behaviour of the composite structures and both are effect by flaws occurred inside the structure. Composite manufacturers, especially Aerospace industry are demanding these methods comprehensively inspect and evaluate the damages and defects in their products.

A pulse-width modulated, high reliability charge controller for small photovoltaic systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerken, K.; Welsh, D.

1997-02-01

This report presents the results of a development effort to design, test and begin production of a new class of small photovoltaic (PV) charge controllers. Sandia National Laboratories provided technical support, test data and financial support through a Balance-of-System Development contract. One of the objectives of the development was to increase user confidence in small PV systems by improving the reliability and operating life of the system controllers. Another equally important objective was to improve the economics of small PV systems by extending the battery lifetimes. Using new technology and advanced manufacturing techniques, these objectives were accomplished. Because small stand-alonemore » PV systems account for over one third of all PV modules shipped, the positive impact of improving the reliability and economics of PV systems in this market segment will be felt throughout the industry. The results of verification testing of the new product are also included in this report. The initial design goals and specifications were very aggressive, but the extensive testing demonstrates that all the goals were achieved. Production of the product started in May at a rate of 2,000 units per month. Over 40 Morningstar distributors (5 US and 35 overseas) have taken delivery in the first 2 months of shipments. Initial customer reactions to the new controller have been very favorable.« less

Initial Closed Operation of the CELSS Test Facility Engineering Development Unit

NASA Technical Reports Server (NTRS)

Kliss, Mark

1995-01-01

As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown sequentially from seed to harvest in the microgravity environment of the Space Station. Stringent environmental control will be maintained while fundamental crop productivity issues, such as carbon dioxide uptake and oxygen production rates, water transpiration rates, and biomass accumulation rates are obtained for comparison with ground-based data. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the appropriate environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The EDU is a ground-based testbed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper describes the initial closed operational testing of the EDU. Measured performance data are compared with the specified functional requirements and results from initial closed testing are presented. Plans for future science and technology testing are discussed.

Virtual prototyping of drop test using explicit analysis

NASA Astrophysics Data System (ADS)

Todorov, Georgi; Kamberov, Konstantin

2017-12-01

Increased requirements for reliability and safety, included in contemporary standards and norms, has high impact over new product development. New numerical techniques based on virtual prototyping technology, facilitates imrpoving product development cycle, resutling in reduced time/money spent for this stage as well as increased knowledge about certain failure mechanism. So called "drop test" became nearly a "must" step in development of any human operated product. This study aims to demonstrate dynamic behaviour assessment of a structure under impact loads, based on virtual prototyping using a typical nonlinear analysis - explicit dynamics. An example is presneted, based on a plastic container that is used as cartridge for a dispenser machine exposed to various work conditions. Different drop orientations were analyzed and critical load cases and design weaknesses have been found. Several design modifications have been proposed, based on detailed analyses results review.

Safeguarding End-User Military Software

DTIC Science & Technology

2014-12-04

product lines using composi- tional symbolic execution [17] Software product lines are families of products defined by feature commonality and vari...ability, with a well-managed asset base. Recent work in testing of software product lines has exploited similarities across development phases to reuse...feature dependence graph to extract the set of possible interaction trees in a product family. It composes these to incrementally and symbolically

Aquatic toxicity of petroleum products and dispersant agents determined under the U.S. EPA Oil Spill Research Program

EPA Science Inventory

The U.S. EPA Office of Research and Development has developed baseline data on the ecotoxicity of selected petroleum products and several chemical dispersants as part of its oil spills research program. Two diluted bitumens (dilbits) from the Alberta Tar Sands were tested for acu...

Testing and characterizations of infrared sensor over the temperature range of 2 Kelvin to 300 Kelvin

NASA Technical Reports Server (NTRS)

Hansen, R. G.

1983-01-01

Various cryogenic techniques were used to evaluate state of the art electro-optic devices. As research, development, and production demands require more sensitive testing techniques, faster test results, and higher production throughput, the emphasis on supporting cryogenic systems increases. The three traditional methods currently utilized in electro-optic device testing are discussed: (1) liquid contaiment dewars; (2) liquid transfer systems; and (3) closed cycle refrigeration systems. Advantages, disadvantages, and the current state of the art of each of these cryogenic techniques is discussed.

A review of modern instrumental techniques for measurements of ice cream characteristics.

PubMed

Bahram-Parvar, Maryam

2015-12-01

There is an increasing demand of the food industries and research institutes to have means of measurement allowing the characterization of foods. Ice cream, as a complex food system, consists of a frozen matrix containing air bubbles, fat globules, ice crystals, and an unfrozen serum phase. Some deficiencies in conventional methods for testing this product encourage the use of alternative techniques such as rheometry, spectroscopy, X-ray, electro-analytical techniques, ultrasound, and laser. Despite the development of novel instrumental applications in food science, use of some of them in ice cream testing is few, but has shown promising results. Developing the novel methods should increase our understanding of characteristics of ice cream and may allow online testing of the product. This review article discusses the potential of destructive and non-destructive methodologies in determining the quality and characteristics of ice cream and similar products. Copyright © 2015. Published by Elsevier Ltd.

Applying Item Response Theory to the Development of a Screening Adaptation of the Goldman-Fristoe Test of Articulation-Second Edition

ERIC Educational Resources Information Center

Brackenbury, Tim; Zickar, Michael J.; Munson, Benjamin; Storkel, Holly L.

2017-01-01

Purpose: Item response theory (IRT) is a psychometric approach to measurement that uses latent trait abilities (e.g., speech sound production skills) to model performance on individual items that vary by difficulty and discrimination. An IRT analysis was applied to preschoolers' productions of the words on the Goldman-Fristoe Test of…

Taylor-Made Education: The Influence of the Efficiency Movement on the Testing of Reading Skills.

ERIC Educational Resources Information Center

Allen, JoBeth

Much of what has developed in the testing of reading harkens back to the days of the "Cult of Efficiency" movement in education that can be largely attributed to Frederick Winslow Taylor. Taylor spent most of his productive years studying time and motion in an attempt to streamline industrial production so that people could work as…

Hyperbaric Oxygen Therapy and Oxygen Compatibility of Skin and Wound Care Products

PubMed Central

Bernatchez, Stéphanie F.; Tucker, Joseph; Chiffoleau, Gwenael

2017-01-01

Objective: Use test methods to assess the oxygen compatibility of various wound care products. Approach: There are currently no standard test methods specifically for evaluating the oxygen compatibility and safety of materials under hyperbaric oxygen (HBO) conditions. However, tests such as the oxygen index (OI), oxygen exposure (OE), and autogenous ignition temperature (AIT) can provide useful information. Results: The OI test measures the minimum oxygen concentration that will support candle-like burning, and it was used to test 44 materials. All but two exhibited an OI equal to or greater (safer) than a control material commonly used in HBO. The OE test exposes each material to an oxygen-enriched atmosphere (>99.5% oxygen) to monitor temperature and pressure for an extended duration. The results of the OE testing indicated that none of the 44 articles tested with this method self-ignited within the 60°C, 3 atm pressurized oxygen atmosphere. The AIT test exposes materials to a rapid ramp up in temperature in HBO conditions at 3 atm until ignition occurs. Ten wound care materials and seven materials usually avoided in HBO chambers were tested. The AIT ranged from 138°C to 384°C for wound care products and from 146°C to 420°C for the other materials. Innovation: This work provides useful data and recommendations to help develop a new standard approach for evaluating the HBO compatibility of wound care products to ensure safety for patients and clinicians. Conclusion: The development of an additional test to measure the risk of electrostatic discharge of materials in HBO conditions is needed. PMID:29098113

Production of Hydrogen by Superadiabatic Decomposition of Hydrogen Sulfide - Final Technical Report for the Period June 1, 1999 - September 30, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rachid B. Slimane; Francis S. Lau; Javad Abbasian

2000-10-01

The objective of this program is to develop an economical process for hydrogen production, with no additional carbon dioxide emission, through the thermal decomposition of hydrogen sulfide (H{sub 2}S) in H{sub 2}S-rich waste streams to high-purity hydrogen and elemental sulfur. The novel feature of the process being developed is the superadiabatic combustion (SAC) of part of the H{sub 2}S in the waste stream to provide the thermal energy required for the decomposition reaction such that no additional energy is required. The program is divided into two phases. In Phase 1, detailed thermochemical and kinetic modeling of the SAC reactor withmore » H{sub 2}S-rich fuel gas and air/enriched air feeds is undertaken to evaluate the effects of operating conditions on exit gas products and conversion efficiency, and to identify key process parameters. Preliminary modeling results are used as a basis to conduct a thorough evaluation of SAC process design options, including reactor configuration, operating conditions, and productivity-product separation schemes, with respect to potential product yields, thermal efficiency, capital and operating costs, and reliability, ultimately leading to the preparation of a design package and cost estimate for a bench-scale reactor testing system to be assembled and tested in Phase 2 of the program. A detailed parametric testing plan was also developed for process design optimization and model verification in Phase 2. During Phase 2 of this program, IGT, UIC, and industry advisors UOP and BP Amoco will validate the SAC concept through construction of the bench-scale unit and parametric testing. The computer model developed in Phase 1 will be updated with the experimental data and used in future scale-up efforts. The process design will be refined and the cost estimate updated. Market survey and assessment will continue so that a commercial demonstration project can be identified.« less

Development of alternative oxygen production source using a zirconia solid electrolyte membrane

NASA Technical Reports Server (NTRS)

Suitor, J. W.; Clark, D. J.; Losey, R. W.

1990-01-01

The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation.

Tumorigenicity assessment of human cell-processed therapeutic products.

PubMed

Yasuda, Satoshi; Sato, Yoji

2015-09-01

Human pluripotent stem cells (hPSCs) are expected to be sources of various cell types used for cell therapy, although hPSCs are intrinsically tumorigenic and form teratomas in immunodeficient animals after transplant. Despite the urgent need, no detailed guideline for the assessment of tumorigenicity of human cell-processed therapeutic products (hCTPs) has been issued. Here we describe our consideration on tumorigenicity and related tests of hCTPs. The purposes of those tests for hPSC-based products are classified into three categories: 1) quality control of raw materials; 2) quality control of intermediate/final products; and 3) safety assessment of final products. Appropriate types of tests need to be selected, taking the purpose(s) into consideration. In contrast, human somatic (and somatic stem) cells are believed to have little tumorigenicity. Therefore, GMP-compliant quality control is essential to avoid contamination of somatic cell-derived products with tumorigenic cells. Compared with in vivo tumorigenicity tests, in vitro cell proliferation assays may be more useful and reasonable for detecting immortalized cells that have a growth advantage in somatic cell-based products. The results obtained from tumorigenicity and related tests for hCTPs should meet the criteria for decisions on product development, manufacturing processes, and clinical applications. Copyright © 2015.

The Production Data Approach for Full Lifecycle Management

NASA Astrophysics Data System (ADS)

Schopf, J.

2012-04-01

The amount of data generated by scientists is growing exponentially, and studies have shown [Koe04] that un-archived data sets have a resource half-life that is only a fraction of those resources that are electronically archived. Most groups still lack standard approaches and procedures for data management. Arguably, however, scientists know something about building software. A recent article in Nature [Mer10] stated that 45% of research scientists spend more time now developing software than they did 5 years ago, and 38% spent at least 1/5th of their time developing software. Fox argues [Fox10] that a simple release of data is not the correct approach to data curation. In addition, just as software is used in a wide variety of ways never initially envisioned by its developers, we're seeing this even to a greater extent with data sets. In order to address the need for better data preservation and access, we propose that data sets should be managed in a similar fashion to building production quality software. These production data sets are not simply published once, but go through a cyclical process, including phases such as design, development, verification, deployment, support, analysis, and then development again, thereby supporting the full lifecycle of a data set. The process involved in academically-produced software changes over time with respect to issues such as how much it is used outside the development group, but factors in aspects such as knowing who is using the code, enabling multiple developers to contribute to code development with common procedures, formal testing and release processes, developing documentation, and licensing. When we work with data, either as a collection source, as someone tagging data, or someone re-using it, many of the lessons learned in building production software are applicable. Table 1 shows a comparison of production software elements to production data elements. Table 1: Comparison of production software and production data. Production Software Production Data End-user considerations End-user considerations Multiple Coders: Repository with check-in procedures Coding standards Multiple producers/collectors Local archive with check-in procedure Metadata Standards Formal testing Formal testing Bug tracking and fixes Bug tracking and fixes, QA/QC Documentation Documentation Formal Release Process Formal release process to external archive License Citation/usage statement The full presentation of this abstract will include a detailed discussion of these issues so that researchers can produce usable and accessible data sets as a first step toward reproducible science. By creating production-quality data sets, we extend the potential of our data, both in terms of usability and usefulness to ourselves and other researchers. The more we treat data with formal processes and release cycles, the more relevant and useful it can be to the scientific community.

Development, manufacturing, and test of graphite-epoxy composite spoilers for flight service on 737 transport aircraft

NASA Technical Reports Server (NTRS)

Stoecklin, R. L.

1976-01-01

A total of 114 spoiler units were fabricated in a production shop environment, utilizing three graphite epoxy material systems. Production planning paper was generated for each spoiler unit to completely document each production step of each spoiler unit. The graphite epoxy skins were laid up on production tooling using both mechanical and hand layup techniques. Inspection techniques utilized MRB type assessment in the abscence of quality requirements. Each completed spoiler was subjected to ultrasonic inspection utilizing a multicolor recording system that documented each inspection result. In addition, one static test spoiler was sectioned after the test to examine the adhesive filleting to the honeycomb core. Visual examination of the cured adhesives showed excellent results.

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 9: PEP design, development and test plans

NASA Technical Reports Server (NTRS)

1979-01-01

A plan for the production of two PEP flight systems is defined. The task's milestones are described. Provisions for the development and assembly of new ground support equipment required for both testing and launch operations are included.

30 CFR 250.241 - What must the DPP or DOCD include?

Code of Federal Regulations, 2010 CFR

2010-07-01

... and production activities include: (1) Development drilling; (2) Well test flaring; (3) Installation... production operations. (b) Location. The location and water depth of each of your proposed wells and... proposed well, the surface location of each production facility, and the locations of all associated...

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Ares I-X Range Safety Analyses Overview

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Gowan, John W., Jr.; Thompson, Brian G.; Tarpley, Ashley W.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Developing Online Course Portal to Improve Teachers’ Competency in Creating Action Research (CAR) Proposal Using Learning Management System (LMS) Moodle

NASA Astrophysics Data System (ADS)

Muhtar, A. A.

2017-02-01

Online course can offer flexible and easy way to improve teachers’ competency in conducting education research, especially in classroom action research (CAR). Teachers can attend the course without physically present in the class. This research aims to (1) develop online course portal to improve teachers’ competency in creating CAR proposal, and (2) produce proper online course portal validated and evaluated from four aspects: learning process, content, graphic user interface and programming. Online course in this research developed using Learning Management System (LMS) Moodle. The research model is using modified Borg & Gall Research and Development (R&D) started from preliminary studies, designing product, creating product, and evaluation. Product validated by three experts from three universities. Research subjects for field test are seven teachers as participants from different schools in several provinces in Indonesia. Based on expert validation and field test results, the product developed in this research categorized as “very good” in all aspects and it is suitable for teacher to improve their competency in creating CAR proposal. Online course portal produced in this research can be used as a proper model for online learning in creating CAR proposal.

Pervaporation of model acetone-butanol-ethanol fermentation product solutions using polytetrafluoroethylene membranes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vrana, D.L.; Meagher, M.M.; Hutkins, R.W.

1993-10-01

A pervaporation apparatus was designed and tested in an effort to develop an integrated fermentation and product recovery process for acetone-butanol-ethanol(ABE) fermentation. A crossflow membrane module able to accommodate flat sheet hydrophobic membranes was used for the experiments. Permeate vapors were collected under vacuum and condensed in a dry ice/ethanol cold trap. The apparatus containing polytetrafluoroethylene membranes was tested using butanol-water and model solutions of ABE products. Parameters such as product concentration, component effect, temperature, and permeate side pressure were examined. 25 refs., 3 figs., 5 tabs.

Developing high-quality educational software.

PubMed

Johnson, Lynn A; Schleyer, Titus K L

2003-11-01

The development of effective educational software requires a systematic process executed by a skilled development team. This article describes the core skills required of the development team members for the six phases of successful educational software development. During analysis, the foundation of product development is laid including defining the audience and program goals, determining hardware and software constraints, identifying content resources, and developing management tools. The design phase creates the specifications that describe the user interface, the sequence of events, and the details of the content to be displayed. During development, the pieces of the educational program are assembled. Graphics and other media are created, video and audio scripts written and recorded, the program code created, and support documentation produced. Extensive testing by the development team (alpha testing) and with students (beta testing) is conducted. Carefully planned implementation is most likely to result in a flawless delivery of the educational software and maintenance ensures up-to-date content and software. Due to the importance of the sixth phase, evaluation, we have written a companion article on it that follows this one. The development of a CD-ROM product is described including the development team, a detailed description of the development phases, and the lessons learned from the project.

A Feminine Care Clinical Research Program Transforms Women's Lives.

PubMed

Tzeghai, Ghebre E; Ajayi, Funmilayo O; Miller, Kenneth W; Imbescheid, Frank; Sobel, Jack D; Farage, Miranda A

2012-12-17

Feminine hygiene products and menstruation education have transformed the lives of women throughout the world. The P&G Feminine Care Clinical Innovation Research Program has played a key role by expanding scientific knowledge as well as developing technical insights and tools for the development of feminine hygiene products. The aim has been to meet the needs of women throughout their life stages, advancing their urogenital health beyond just menstruation, as well as helping to understand the role of sex hormones in various important health issues that women face. This review article highlights key contributions and research findings in female hygiene products, urogenital health research, and method development. The clinical research team focused on utilizing the results of clinical safety studies to advance the acceptance of feminine hygiene products world-wide. Key findings include that perception of skin sensitivity is not limited to the facial area, but is also relevant to the body and the genital area. Also, they shed light on the role of estrogen in autoimmune diseases as well as premenstrual syndrome. Efforts in the method development area focused on innovative tools that are reliable, predictive of clinical trial results and capable of measuring wear comfort, genital skin health, and the impact of product use on the consumer's quality of life. A novel method, behind-the-knee (BTK) test, developed to model irritation under normal wear conditions, was the first to account for both chemical and mechanical sources of irritation. The method has been accepted by the FDA as a substitute in clinical trials in some cases, and by American Society for Testing and Materials as a global standard test method. Additional proprietary methods were developed to enhance visual grading of irritation using cross-polarized light, to measure the amount of lotion transferred from sanitary pads, and to evaluate the skin mildness. Finally, the Farage Quality of Life tool was created to measure consumer's well-being. Based on the results of this extensive clinical research and the newly developed testing methods, the changing needs of women throughout their life stages are better met.

A Feminine Care Clinical Research Program Transforms Women’s Lives

PubMed Central

Tzeghai, Ghebre E.; Ajayi, Funmilayo O.; Miller, Kenneth W.; Imbescheid, Frank; Sobel, Jack D.; Farage, Miranda A.

2015-01-01

Feminine hygiene products and menstruation education have transformed the lives of women throughout the world. The P&G Feminine Care Clinical Innovation Research Program has played a key role by expanding scientific knowledge as well as developing technical insights and tools for the development of feminine hygiene products. The aim has been to meet the needs of women throughout their life stages, advancing their urogenital health beyond just menstruation, as well as helping to understand the role of sex hormones in various important health issues that women face. This review article highlights key contributions and research findings in female hygiene products, urogenital health research, and method development. The clinical research team focused on utilizing the results of clinical safety studies to advance the acceptance of feminine hygiene products world-wide. Key findings include that perception of skin sensitivity is not limited to the facial area, but is also relevant to the body and the genital area. Also, they shed light on the role of estrogen in autoimmune diseases as well as premenstrual syndrome. Efforts in the method development area focused on innovative tools that are reliable, predictive of clinical trial results and capable of measuring wear comfort, genital skin health, and the impact of product use on the consumer’s quality of life. A novel method, behind-the-knee (BTK) test, developed to model irritation under normal wear conditions, was the first to account for both chemical and mechanical sources of irritation. The method has been accepted by the FDA as a substitute in clinical trials in some cases, and by American Society for Testing and Materials as a global standard test method. Additional proprietary methods were developed to enhance visual grading of irritation using cross-polarized light, to measure the amount of lotion transferred from sanitary pads, and to evaluate the skin mildness. Finally, the Farage Quality of Life tool was created to measure consumer’s well-being. Based on the results of this extensive clinical research and the newly developed testing methods, the changing needs of women throughout their life stages are better met. PMID:25946910

Draft Plan to Develop Non-Intrusive Load Monitoring Test Protocols

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayhorn, Ebony T.; Sullivan, Greg P.; Petersen, Joseph M.

2015-09-29

This document presents a Draft Plan proposed to develop a common test protocol that can be used to evaluate the performance requirements of Non-Intrusive Load Monitoring. Development on the test protocol will be focused on providing a consistent method that can be used to quantify and compare the performance characteristics of NILM products. Elements of the protocols include specifications for appliances to be used, metrics, instrumentation, and a procedure to simulate appliance behavior during tests. In addition, three priority use cases for NILM will be identified and their performance requirements will specified.

Hybrid analysis (barcode-high resolution melting) for authentication of Thai herbal products, Andrographis paniculata (Burm.f.) Wall.ex Nees.

PubMed

Osathanunkul, Maslin; Suwannapoom, Chatmongkon; Khamyong, Nuttaluck; Pintakum, Danupol; Lamphun, Santisuk Na; Triwitayakorn, Kanokporn; Osathanunkul, Kitisak; Madesis, Panagiotis

2016-01-01

Andrographis paniculata Nees is a medicinal plant with multiple pharmacological properties. It has been used over many centuries as a household remedy. A. paniculata products sold on the markets are in processed forms so it is difficult to authenticate. Therefore buying the herbal products poses a high-risk of acquiring counterfeited, substituted and/or adulterated products. Due to these issues, a reliable method to authenticate products is needed. High resolution melting analysis coupled with DNA barcoding (Bar-HRM) was applied to detect adulteration in commercial herbal products. The rbcL barcode was selected to use in primers design for HRM analysis to produce standard melting profile of A. paniculata species. DNA of the tested commercial products was isolated and their melting profiles were then generated and compared with the standard A. paniculata. The melting profiles of the rbcL amplicons of the three closely related herbal species (A. paniculata, Acanthus ebracteatus and Rhinacanthus nasutus) are clearly separated so that they can be distinguished by the developed method. The method was then used to authenticate commercial herbal products. HRM curves of all 10 samples tested are similar to A. paniculata which indicated that all tested products were contained the correct species as labeled. The method described in this study has been proved to be useful in aiding identification and/or authenticating A. paniculata. This Bar-HRM analysis has allowed us easily to determine the A. paniculata species in herbal products on the markets even they are in processed forms. We propose the use of DNA barcoding combined with High Resolution Melting analysis for authenticating of Andrographis paniculata products.The developed method can be used regardless of the type of the DNA template (fresh or dried tissue, leaf, and stem).rbcL region was chosen for the analysis and work well with our samplesWe can easily determine the A. paniculata species in herbal products tested. Abbreviations used: bp: Base pair, Tm: Melting temperature.

Technical Requirements for the Development of Marine Steel in China

NASA Astrophysics Data System (ADS)

Su, Hang; Pan, Tao; Chai, Feng; Yang, Caifu

China now experiences a fast development in shipbuilding and marine steel, the self-developed steel could meet the needs among 95% domestic clients. But in the items of some special high-end products, there are still certain gaps with advanced foreign countries, and these are mainly high-quality and strong-capacity products, large-size products, low-temperature products, and anti-corrosion, anti-fatigue and high-level failure arrest products. In the present paper, some domestic research and development (R& D) results in industry have been introduced, also, it points out that to eliminate these gaps, should rely on both the tech-progress in iron and steel industry, shipbuilding, and marine steel industry, and the establishment and improvement of the R& D system in researching, manufacturing, testing, producing and application.

Modeling Code Is Helping Cleveland Develop New Products

NASA Technical Reports Server (NTRS)

1998-01-01

Master Builders, Inc., is a 350-person company in Cleveland, Ohio, that develops and markets specialty chemicals for the construction industry. Developing new products involves creating many potential samples and running numerous tests to characterize the samples' performance. Company engineers enlisted NASA's help to replace cumbersome physical testing with computer modeling of the samples' behavior. Since the NASA Lewis Research Center's Structures Division develops mathematical models and associated computation tools to analyze the deformation and failure of composite materials, its researchers began a two-phase effort to modify Lewis' Integrated Composite Analyzer (ICAN) software for Master Builders' use. Phase I has been completed, and Master Builders is pleased with the results. The company is now working to begin implementation of Phase II.

Using pattern enumeration to accelerate process development and ramp yield

NASA Astrophysics Data System (ADS)

Zhuang, Linda; Pang, Jenny; Xu, Jessy; Tsai, Mengfeng; Wang, Amy; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh; Ding, Hua

2016-03-01

During a new technology node process setup phase, foundries do not initially have enough product chip designs to conduct exhaustive process development. Different operational teams use manually designed simple test keys to set up their process flows and recipes. When the very first version of the design rule manual (DRM) is ready, foundries enter the process development phase where new experiment design data is manually created based on these design rules. However, these IP/test keys contain very uniform or simple design structures. This kind of design normally does not contain critical design structures or process unfriendly design patterns that pass design rule checks but are found to be less manufacturable. It is desired to have a method to generate exhaustive test patterns allowed by design rules at development stage to verify the gap of design rule and process. This paper presents a novel method of how to generate test key patterns which contain known problematic patterns as well as any constructs which designers could possibly draw based on current design rules. The enumerated test key patterns will contain the most critical design structures which are allowed by any particular design rule. A layout profiling method is used to do design chip analysis in order to find potential weak points on new incoming products so fab can take preemptive action to avoid yield loss. It can be achieved by comparing different products and leveraging the knowledge learned from previous manufactured chips to find possible yield detractors.

Metallic Contaminant Detection using a High-Temperature Superconducting Quantum Interference Devices Gradiometer

NASA Astrophysics Data System (ADS)

Saburo, Tanaka; Tomohiro, Akai; Makoto, Takemoto; Yoshimi, Hatsukade; Takeyoshi, Ohtani; Yoshio, Ikeda; Shuichi, Suzuki

2010-08-01

We develop magnetic metallic contaminant detectors using high-temperature superconducting quantum interference devices (HTS-SQUIDs) for industrial products. Finding ultra-small metallic contaminants is an important issue for manufacturers producing commercial products such as lithium ion batteries. If such contaminants cause damages, the manufacturer of the product suffers a big financial loss due to having to recall the faulty products. Previously, we described a system for finding such ultra-small particles in food. In this study, we describe further developments of the system, for the reduction of the effect of the remnant field of the products, and we test the parallel magnetization of the products to generate the remnant field only at both ends of the products. In addition, we use an SQUID gradiometer in place of the magnetometer to reduce the edge effect by measuring the magnetic field gradient. We test the performances of the system and find that tiny iron particles as small as 50 × 50 μm2 on the electrode of a lithium ion battery could be clearly detected. This detection level is difficult to achieve when using other methods.

Sample preparation composite and replicate strategy case studies for assay of solid oral drug products.

PubMed

Nickerson, Beverly; Harrington, Brent; Li, Fasheng; Guo, Michele Xuemei

2017-11-30

Drug product assay is one of several tests required for new drug products to ensure the quality of the product at release and throughout the life cycle of the product. Drug product assay testing is typically performed by preparing a composite sample of multiple dosage units to obtain an assay value representative of the batch. In some cases replicate composite samples may be prepared and the reportable assay value is the average value of all the replicates. In previously published work by Harrington et al. (2014) [5], a sample preparation composite and replicate strategy for assay was developed to provide a systematic approach which accounts for variability due to the analytical method and dosage form with a standard error of the potency assay criteria based on compendia and regulatory requirements. In this work, this sample preparation composite and replicate strategy for assay is applied to several case studies to demonstrate the utility of this approach and its application at various stages of pharmaceutical drug product development. Copyright © 2017 Elsevier B.V. All rights reserved.

Preclinical safety testing for cell-based products using animals.

PubMed

McBlane, James W

2015-09-01

The objectives of preclinical testing include to show why there might be therapeutic benefit in patients and to provide information on the product's toxicity. For cell-based products, given even once, there may be long term exposure and this could imply, unlike for conventional drugs, that all preclinical studies may be needed prior to first human use. The duration of exposure to cells should be studied in animals to guide toxicity assessments. Distribution of cells after administration by a route resembling that intended in humans should be studied to understand potential risks. Risk of tumour formation with the product may also need to be characterised. To the extent that this information can be generated by in vitro testing, studies in animals may not be needed and limitations on the capability of preclinical data to predict human toxicity are recognised: species-specificity make some cell products act only in humans and a human cell-product might be expected to be rejected by immunocompetent animals. Does this suggest testing in immunosuppressed animals or of development of an animal-cell product supposedly similar to the human cell product? No single answer seems to fit every situation. Copyright © 2015.

Development of Open-Ended Problems for Measuring The Higher-Order-Thinking-Skills of High School Students on Global Warming Phenomenon

NASA Astrophysics Data System (ADS)

Fianti; Najwa, F. L.; Linuwih, S.

2017-04-01

Higher-order-thinking-skills can not be developed directly, except by training which is employing open-ended problems for measuring and developing critics, creativeness, and problem-solving thinking-skills of students. This study is a research and development producing open-ended problems. The purpose of this study is to measure the properness and effectiveness of the developed product and to observe the profile of higher-order-thinking-skills of students on global warming phenomenon. The result of properness test of open-ended problems according to the experts is 92,59% on the first stage and 97,53% on the second stage, so we can assume that the product isvery proper. The result of effectiveness test shows the coefficient of correlation between student’s midterm test scores and open-ended questions is 0,634 which is in the category of strong. Higher-order-thinking-skills of SMA Negeri 1 Salatiga students is in the category of good with the average achievement scores 61,28.

UserTesting.com: A Tool for Usability Testing of Online Resources

ERIC Educational Resources Information Center

Koundinya, Vikram; Klink, Jenna; Widhalm, Melissa

2017-01-01

Extension educators are increasingly using online resources in their program design and delivery. Usability testing is essential for ensuring that these resources are relevant and useful to learners. On the basis of our experiences with iteratively developing products using a testing service called UserTesting, we promote the use of fee-based…

Production and Evaluation of a Purified Adenovirus Group-Specific (Hexon) Antigen for Use in the Diagnostic Complement Fixation Test

PubMed Central

Dowdle, W. R.; Lambriex, M.; Hierholzer, J. C.

1971-01-01

A simple procedure for the production of large volumes of purified adenovirus group-specific complement-fixing (CF) (hexon) antigen by selective adsorption to and elution from CaHPO4 is described. Results of immunodiffusion tests, electrophoresis, electron microscopy, and tests for hemagglutination and infectivity indicate that the purified antigen consisted of a single virus component (hexon). The purified product contained little host materials. Unlike the crude virus harvest usually employed for serodiagnostic CF tests, the purified antigen demonstrated no anticomplementary activity and did not develop such activity during storage. The purified antigen was equal to or slightly more sensitive than crude virus harvests for serodiagnosis of adenovirus infections. Images PMID:4325021

Measuring healthcare productivity - from unit to system level.

PubMed

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

Bibliography of In-House and Contract Reports, Supplement 18

DTIC Science & Technology

1992-10-01

Transparent Conforming Overlays 46 TITLE REPORT NO. YEAR Development, Service Tests, and Production Model 1307 -TR 1953 Tests, Autofocusing Rectifier...Development, Test, Preparation, Delivery, and ETL- 1307 1982 Installation of Algorithms for Optimal Adjustment of Inertial Survey Data Developmental Optical...B: Terrain ETL- 0428 1986 and Object Modeling Recognition (March 13, 1985 - March 13, 1986) Knowledge-Based Vision Techniques - Task B: Terrain ETL

Next Generation Ship-Borne ASW-System: An Exemplary Exertion of Methodologies and Tools Applied According to the German Military Acquisition Guidelines

DTIC Science & Technology

2013-06-01

as well as the evaluation of product parameters, operational test and functional limits. The product will be handed over to the designated ...which results in a system design that can be tested , produced, and fielded to satisfy the need. The concept development phase enables us to determine...specifications that can be tested or verified. The requirements presented earlier are the minimum necessary to allow the design process to find

Strategies for Improving U.S. Air Force Productivity: Developing Methodologies for Assessing the Potential Relationship between Communication Behaviors and Productivity.

DTIC Science & Technology

1980-09-01

1176 NL EmillllllllEhmhmmhhhhhmhu ,mhhmmhhhhmhhhu Ehmmhhmhhmhhl EllhlhElhlhEEE Emmhhhhhhmmhu 1 II 12.5 111111.25 1 I1 6 MICROCOPY RESOLUTION TEST ...Technician Performance t/-O7 20J ABSTRCT fContinue an reverse aid* it necesary and Identify by block number) ILJ Liedhe poetwas a preliminary testing of a...of work characteristics. These were evaluated according to re- sponse patterns, factor structure, and/or reliability indicants.. Preliminary testing

Development and Clinical Assessment of a Comprehensive Product for Pigmentation Control in Multiple Ethnic Populations.

PubMed

Makino, Elizabeth T; Kadoya, Kuniko; Sigler, Monya L; Hino, Peter D; Mehta, Rahul C

2016-12-01

Pigmentary changes in people of different ethnic origins are controlled by slight variations in key biological pathways leading to different outcomes from the same treatment. It is important to develop and test products for desired outcomes in varying ethnic populations. To develop a comprehensive product (LYT2) that affects all major biological pathways controlling pigmentation and test for clinical efficacy and safety in different ethnic populations. A thorough analysis of biological pathways was used to identify ingredient combinations for LYT2 that provided optimal melanin reduction in a 3-D skin model. Expression of four key genes for melanogenesis, TYR, TYRP-1, DCT, and MITF was analyzed by qPCR. Clinical study was conducted to compare the efficacy and tolerability of LYT2 against 4% hydroquinone (HQ). Average melanin suppression by LYT2 in 7 independent experiments was 45%. All four key genes show significant down- regulation of expression. LYT2 provided statistically significant reductions in mean overall hyperpigmentation grades as early as week 2 compared to baseline, with continued significant improvements through week 12 in all ethnic groups tested. We have successfully combined management of 6 categories of pathways related to melanogenesis: melanocyte activation, melanosome development, melanin production, melanin distribution, keratinocyte turnover, and barrier function to create a comprehensive HQ-free product. The outcome clearly shows greater pigmentation control with LYT2 compared to other HQ-free products in skin tissue models and earlier control in clinical studies compared to 4% HQ. Clinical study shows pigmentation control benefits of LYT2 in people of Caucasian, Hispanic, and African ethnic origins. J Drugs Dermatol. 2016;15(12):1562-1570.

A search for the production of direct leptons in nucleon-nucleus and nucleus-nucleus collisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirk, P.N.

1990-12-01

This report discusses the following topics: subthreshold production experiment; testing and selection of PCOS amplifiers; transverse energy detector; development of a sensitive new amplifiers; single-lepton experiment. (LSP)

27 CFR 19.701 - Spirits withdrawn from bonded premises.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., development, or testing (other than consumer testing or other market analysis) of processes, systems... similar products or entry in the continuous distilling system. (e) Limitation. The appropriate TTB officer...

CORBASec Used to Secure Distributed Aerospace Propulsion Simulations

NASA Technical Reports Server (NTRS)

Blaser, Tammy M.

2003-01-01

The NASA Glenn Research Center and its industry partners are developing a Common Object Request Broker (CORBA) Security (CORBASec) test bed to secure their distributed aerospace propulsion simulations. Glenn has been working with its aerospace propulsion industry partners to deploy the Numerical Propulsion System Simulation (NPSS) object-based technology. NPSS is a program focused on reducing the cost and time in developing aerospace propulsion engines. It was developed by Glenn and is being managed by the NASA Ames Research Center as the lead center reporting directly to NASA Headquarters' Aerospace Technology Enterprise. Glenn is an active domain member of the Object Management Group: an open membership, not-for-profit consortium that produces and manages computer industry specifications (i.e., CORBA) for interoperable enterprise applications. When NPSS is deployed, it will assemble a distributed aerospace propulsion simulation scenario from proprietary analytical CORBA servers and execute them with security afforded by the CORBASec implementation. The NPSS CORBASec test bed was initially developed with the TPBroker Security Service product (Hitachi Computer Products (America), Inc., Waltham, MA) using the Object Request Broker (ORB), which is based on the TPBroker Basic Object Adaptor, and using NPSS software across different firewall products. The test bed has been migrated to the Portable Object Adaptor architecture using the Hitachi Security Service product based on the VisiBroker 4.x ORB (Borland, Scotts Valley, CA) and on the Orbix 2000 ORB (Dublin, Ireland, with U.S. headquarters in Waltham, MA). Glenn, GE Aircraft Engines, and Pratt & Whitney Aircraft are the initial industry partners contributing to the NPSS CORBASec test bed. The test bed uses Security SecurID (RSA Security Inc., Bedford, MA) two-factor token-based authentication together with Hitachi Security Service digital-certificate-based authentication to validate the various NPSS users. The test bed is expected to demonstrate NPSS CORBASec-specific policy functionality, confirm adequate performance, and validate the required Internet configuration in a distributed collaborative aerospace propulsion environment.

Usability Engineering Can Change Our Thinking

ERIC Educational Resources Information Center

Flowers, Jim

2014-01-01

Technology and engineering education and its predecessors have a long history of being effective programs for helping students learn about technology and technological design. Students are often asked to solve design challenges, develop product ideas, and create models or prototypes for products. They do not often set up tests with product users…

Satellite-based products for forest fire prevention and recovery: the PREFER experience

NASA Astrophysics Data System (ADS)

Laneve, Giovanni; Bernini, Guido; Fusilli, Lorenzo; Marzialetti, Pablo

2016-08-01

PREFER is a three years projects funded in 2012 in the framework of the FP7 Emergency call. The project objective was to set up a space-based service infrastructure and up-to-date cartographic products, based on remote sensing data, to support the preparedness, prevention, recovery and reconstruction phases of the Forest Fires emergency cycle in the European Mediterranean Region. The products of PREFER were tested and evaluated during the training and the demonstration period of the project, which coincided with the forest fire season of 2015. The products were tested using the online PREFER service and the tests were linked to the pilot areas of the project which are Minho (Portugal), Messenia (Greece), Andalucía (Spain), Sardinia (Italy) and Corse (France). Testing was performed by members of the User Advisory Board (UAB) starting from the training event organized in Coimbra, Portugal in June 2015. The tests continued till the end of the fire season (October 2015) and the end users were provided with updated information for the areas of interest during the entire demonstration period. Due to data availability restrictions (in particular to ancillary required data) not all products were available for testing in all the test areas. However all the PREFER products were tested at least in one pilot area and in cooperation with at least one end user organization. It has to be mentioned that beyond the product suitability and usefulness to the end users the tests included evaluation of the usability of the web-based service of PREFER and the respective quality of service provided. This paper aims at presenting the results of the demonstration activity, the lessons learned and ideas for further enhancement of the developed products devoted to support prevention and recovery phases of the wildfire cycle.

Development of friction and wear full-scale testing for TKR prostheses with reliable low cost apparatus

NASA Astrophysics Data System (ADS)

Suwandi, Agri; Soemardi, Tresna P.; Kiswanto, Gandjar; Kusumaningsih, Widjajalaksmi; I. Gusti Agung I. G., W.

2018-02-01

Prostheses products must undergo simulation and physical testing, before clinical testing. Finite element method is a preliminary simulation for in vivo test. The method visualizes the magnitude of the compressive force and the critical location of the Total Knee Replacement (TKR) prostheses design. In vitro testing is classified as physical testing for prostheses product. The test is conducted to evaluate the potential failure of the product and the characteristics of the prostheses TKR material. Friction and wear testing are part of the in vivo test. Motion of knee joints, which results in the phenomena of extension and deflection in the femoral and tibia insert, is represented by friction and wear testing. Friction and wear tests aim to obtain an approximate lifetime in normal and extreme load patterns as characterized by the shape of the friction surface area. The lifetime estimation requires friction and wear full-scale testing equipments for TKR prostheses products. These are necessary in obtaining initial data on potential product failures and characterizing of the material based on the ASTM F2724-08 standards. Based on the testing result and statistical analysis data, the average wear rate value per year is 2.19 × 10-3 mg/MC, with a 10 % safety limit of volume and 14,400 cycles times, for 15 hours moving nonstop then the prediction of wear life of the component tibia insert is ± 10 years.

Language development in Japanese children who receive cochlear implant and/or hearing aid.

PubMed

Iwasaki, Satoshi; Nishio, Shinya; Moteki, Hideaki; Takumi, Yutaka; Fukushima, Kunihiro; Kasai, Norio; Usami, Shin-Ichi

2012-03-01

This study aimed to investigate a wide variety of factors that influence auditory, speech, and language development following pediatric cochlear implantation (CI). Prospective collection of language tested data in profound hearing-impaired children. Pediatric CI can potentially be effective to development of practical communication skills and early implantation is more effective. We proposed a set of language tests (assessment package of the language development for Japanese hearing-impaired children; ALADJIN) consisting of communication skills testing (test for question-answer interaction development; TQAID), comprehensive (Peabody Picture Vocabulary Test-Revised; PVT-R and Standardized Comprehension Test for Abstract Words; SCTAW) and productive vocabulary (Word Fluency Test; WFT), and comprehensive and productive syntax (Syntactic processing Test for Aphasia; STA). Of 638 hearing-impaired children recruited for this study, 282 (44.2%) with >70 dB hearing impairment had undergone CI. After excluding children with low birth weight (<1800 g), those with >11 points on the Pervasive Developmental Disorder ASJ Rating Scale for the test of autistic tendency, and those <2 SD on Raven's Colored Progressive Matrices for the test of non-verbal intelligence, 190 children were subjected to this set of language tests. Sixty children (31.6%) were unilateral CI-only users, 128 (67.4%) were CI-hearing aid (HA) users, and 2 (1.1%) were bilateral CI users. Hearing loss level of CI users was significantly (p<0.01) worse than that of HA-only users. However, the threshold level, maximum speech discrimination score, and speech intelligibility rating in CI users were significantly (p<0.01) better than those in HA-only users. The scores for PVT-R (p<0.01), SCTAW, and WFT in CI users were better than those in HA-only users. STA and TQAID scores in CI-HA users were significantly (p<0.05) better than those in unilateral CI-only users. The high correlation (r=0.52) has been found between the age of CI and maximum speech discrimination score. The scores of speech and language tests in the implanted children before 24 months of age have been better than those in the implanted children after 24 months of age. We could indicate that CI was effective for language development in Japanese hearing-impaired children and early CI was more effective for productive vocabulary and syntax. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Electrochemical reduction of carbon dioxide. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaConti, A.B.; Molter, T.M.; Zagaja, J.A.

1986-05-01

Many researchers have studied the electrochemical reduction of carbon dioxide and related organic species to form concentrated liquid/gaseous products in laboratory-scale hardware. Hamilton Standard has developed a high pressure SPE electrolysis cell capable of reducing carbon dioxide streams to form pure, concentrated alcohols, carboxylic acids, and other hydrocarbons. The process is unique in that the byproducts of reaction include oxygen and, under some test conditions water. In addition, a relatively simple test system was designed and constructed permitting both batch and semibatch type electrochemical reduction studies. In this study, cathode materials were developed which 1) had a characteristic high hydrogenmore » overvoltage, and 2) possessed the intrinsic affinity for electrochemical reduction of the carbon dioxide species. In addition, suitable anode electrocatalyst materials were identified. Studies involving the electrochemical reduction of carbon dioxide required the ability to identify and quantify reaction products obtained during cell evaluation. Gas chromatographic techniques were developed along with the establishment of ion chromatographic methods permitting the analysis of organic reaction products. Hamilton Standard has evaluated electrochemical carbon dioxide reduction cells under a variety of test conditions.« less

Elicited Production of Relative Clauses in Children with Williams Syndrome

ERIC Educational Resources Information Center

Zukowski, Andrea

2009-01-01

Relative clauses have been implicated alternately as a strength and a weakness in the language of people with Williams Syndrome (WS). To clarify the facts, an elicited production test was administered to 10 people with WS (age 10-16 years), 10 typically developing children (age 4-7 years), and 12 typically developing adults. Nearly every WS…

Inservice Education of Vocational Agriculture Teachers on New Curriculum Materials for Adult Class Instruction: Final Report.

ERIC Educational Resources Information Center

McCracken, J. David, Ed.; Newcomb, L. H., Ed.

Twenty-two field-tested instructional units were developed for use in adult and young farmer education by 20 specially trained agriculture teachers in Ohio. The resource units were developed in the following agriculture areas of instruction: corn and soybean production, agriculture mechanics, swine production, farm management, and horticulture.…

Growian rotor blades: Production development, construction and test

NASA Technical Reports Server (NTRS)

Thiele, H. M.

1984-01-01

Development and construction of three 50 m rotor blades for a 3 MW wind turbine are described. A hybrid concept was chosen, i.e., a load carrying inflexible steel spar and a glass fiber reinforced plastic skin. A test blade was constructed and static loading tests, dynamic vibration tests and fatigue tests on critical welds as well as at the connection between spar and blade skin were performed. All test results show good accordance with calculated values, and were taken into consideration during the construction of two rotor blades.

Propulsion and Power Rapid Response Research and Development (R&D) Support. Task Order 0004: Advanced Propulsion Fuels R&D, Subtask: Optimization of Lipid Production and Processing of Microalgae for the Development of Biofuels

DTIC Science & Technology

2013-02-01

Purified cultures are tested for optimized production under heterotrophic conditions with several organic carbon sources like beet and sorghum juice using ...Moreover, AFRL support sponsored the Master’s in Chemical Engineering project titled “Cost Analysis Of Local Bio- Products Processing Plant Using ...unlimited. 2.5 Screening for High Lipid Production Mutants Procedure: A selection of 84 single colony cultures was analyzed in this phase using the

Development of adapted GMR-probes for automated detection of hidden defects in thin steel sheets

NASA Astrophysics Data System (ADS)

Pelkner, Matthias; Pohl, Rainer; Kreutzbruck, Marc; Commandeur, Colin

2016-02-01

Thin steel sheets with a thickness of 0.3 mm and less are the base materials of many everyday life products (cans, batteries, etc.). Potential inhomogeneities such as non-metallic inclusions inside the steel can lead to a rupture of the sheets when it is formed into a product such as a beverage can. Therefore, there is a need to develop automated NDT techniques to detect hidden defects and inclusions in thin sheets during production. For this purpose Tata Steel Europe and BAM, the Federal Institute for Materials Research and Testing (Germany), collaborate in order to develop an automated NDT-system. Defect detection systems have to be robust against external influences, especially when used in an industrial environment. In addition, such a facility has to achieve a high sensitivity and a high spatial resolution in terms of detecting small inclusions in the μm-regime. In a first step, we carried out a feasibility study to determine which testing method is promising for detecting hidden defects and inclusions inside ferrous thin steel sheets. Therefore, two methods were investigated in more detail - magnetic flux leakage testing (MFL) using giant magneto resistance sensor arrays (GMR) as receivers [1,2] and eddy current testing (ET). The capabilities of both methods were tested with 0.2 mm-thick steel samples containing small defects with depths ranging from 5 µm up to 60 µm. Only in case of GMR-MFL-testing, we were able to detect parts of the hidden defects with a depth of 10 µm trustworthily with a SNR better than 10 dB. Here, the lift off between sensor and surface was 250 µm. On this basis, we investigated different testing scenarios including velocity tests and different lift offs. In this contribution we present the results of the feasibility study leading to first prototypes of GMR-probes which are now installed as part of a demonstrator inside a production line.

Reliability and testing

NASA Technical Reports Server (NTRS)

Auer, Werner

1996-01-01

Reliability and its interdependence with testing are important topics for development and manufacturing of successful products. This generally accepted fact is not only a technical statement, but must be also seen in the light of 'Human Factors.' While the background for this paper is the experience gained with electromechanical/electronic space products, including control and system considerations, it is believed that the content could be also of interest for other fields.

A Case Study Assessing the Auditory and Speech Development of Four Children Implanted with Cochlear Implants by the Chronological Age of 12 Months

PubMed Central

2013-01-01

Children with severe hearing loss most likely receive the greatest benefit from a cochlear implant (CI) when implanted at less than 2 years of age. Children with a hearing loss may also benefit greater from binaural sensory stimulation. Four children who received their first CI under 12 months of age were included in this study. Effects on auditory development were determined using the German LittlEARS Auditory Questionnaire, closed- and open-set monosyllabic word tests, aided free-field, the Mainzer and Göttinger speech discrimination tests, Monosyllabic-Trochee-Polysyllabic (MTP), and Listening Progress Profile (LiP). Speech production and grammar development were evaluated using a German language speech development test (SETK), reception of grammar test (TROG-D) and active vocabulary test (AWST-R). The data showed that children implanted under 12 months of age reached open-set monosyllabic word discrimination at an age of 24 months. LiP results improved over time, and children recognized 100% of words in the MTP test after 12 months. All children performed as well as or better than their hearing peers in speech production and grammar development. SETK showed that the speech development of these children was in general age appropriate. The data suggests that early hearing loss intervention benefits speech and language development and supports the trend towards early cochlear implantation. Furthermore, the data emphasizes the potential benefits associated with bilateral implantation. PMID:23509653

A case study assessing the auditory and speech development of four children implanted with cochlear implants by the chronological age of 12 months.

PubMed

May-Mederake, Birgit; Shehata-Dieler, Wafaa

2013-01-01

Children with severe hearing loss most likely receive the greatest benefit from a cochlear implant (CI) when implanted at less than 2 years of age. Children with a hearing loss may also benefit greater from binaural sensory stimulation. Four children who received their first CI under 12 months of age were included in this study. Effects on auditory development were determined using the German LittlEARS Auditory Questionnaire, closed- and open-set monosyllabic word tests, aided free-field, the Mainzer and Göttinger speech discrimination tests, Monosyllabic-Trochee-Polysyllabic (MTP), and Listening Progress Profile (LiP). Speech production and grammar development were evaluated using a German language speech development test (SETK), reception of grammar test (TROG-D) and active vocabulary test (AWST-R). The data showed that children implanted under 12 months of age reached open-set monosyllabic word discrimination at an age of 24 months. LiP results improved over time, and children recognized 100% of words in the MTP test after 12 months. All children performed as well as or better than their hearing peers in speech production and grammar development. SETK showed that the speech development of these children was in general age appropriate. The data suggests that early hearing loss intervention benefits speech and language development and supports the trend towards early cochlear implantation. Furthermore, the data emphasizes the potential benefits associated with bilateral implantation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NEIL K. MCDOUGALD

Alzeta Corporation has developed surface-stabilized fuel injectors for use with lean premixed combustors which provide extended turndown and ultra-low NOX emission performance. These injectors use a patented technique to form interacting radiant and blue-flame zones immediately above a selectively-perforated porous metal surface. This allows stable operation at low reaction temperatures. This technology is being commercialized under the product name nanoSTAR. Initial tests demonstrated low NOX emissions but, were limited by flashback failure of the injectors. The weld seams required to form cylindrical injectors from flat sheet material were identified as the cause of the failures. The approach for this projectmore » was to first develop new fabrication methods to produce injectors without weld seams, verify similar emissions performance to the original flat sheet material and then develop products for microturbines and small gas turbines along parallel development paths. A 37 month project was completed to develop and test a surface stabilized combustion system for gas turbine applications. New fabrication techniques developed removed a technological barrier to the success of the product by elimination of conductive weld seams from the injector surface. The injectors demonstrated ultra low emissions in rig tests conducted under gas turbine operating conditions. The ability for injectors to share a common combustion chamber allowing for deployment in annular combustion liner was also demonstrated. Some further development is required to resolve integration issues related to specific engine constraints, but the nanoSTAR technology has clearly demonstrated its low emissions potential. The overall project conclusions can be summarized: (1) A wet-laid casting method successfully eliminated weld seams from the injector surface without degrading performance. (2) Gas turbine cycle analysis identified several injector designs and control schemes to start and load engines using nanoSTAR technology. A mechanically simple single zone injector can be used in Solar Turbine's Taurus 60 engine. (3) Rig testing of single monolithic injectors demonstrated sub 3 ppmv NOX and sub 10 ppmv CO and UHC emissions (all corrected to 15% O2) at Taurus 60 full-load pressure and combustion air inlet temperature. (4) Testing of two nanoSTAR injectors in Solar Turbine's sector rig demonstrated the ability for injectors to survive when fired in close proximity at Taurus 60 full load pressure and combustion air inlet temperature. (5) Sector rig tests demonstrated emissions performance and range of operability consistent with single injector rig tests. Alzeta has committed to the commercialization of nanoSTAR injectors and has sufficient production capability to conclude development and meet initial demand.« less

Status of the ion sources developments for the Spiral2 project at GANILa)

NASA Astrophysics Data System (ADS)

Lehérissier, P.; Bajeat, O.; Barué, C.; Canet, C.; Dubois, M.; Dupuis, M.; Flambard, J. L.; Frigot, R.; Jardin, P.; Leboucher, C.; Lemagnen, F.; Maunoury, L.; Osmond, B.; Pacquet, J. Y.; Pichard, A.; Thuillier, T.; Peaucelle, C.

2012-02-01

The SPIRAL 2 facility is now under construction and will deliver either stable or radioactive ion beams. First tests of nickel beam production have been performed at GANIL with a new version of the large capacity oven, and a calcium beam has been produced on the heavy ion low energy beam transport line of SPIRAL 2, installed at LPSC Grenoble. For the production of radioactive beams, several target/ion-source systems (TISSs) are under development at GANIL as the 2.45 GHz electron cyclotron resonance ion source, the surface ionization source, and the oven prototype for heating the uranium carbide target up to 2000 °C. The existing test bench has been upgraded for these developments and a new one, dedicated for the validation of the TISS before mounting in the production module, is under design. Results and current status of these activities are presented.

Towards a New Generation of Agricultural System Data, Models and Knowledge Products: Design and Improvement

NASA Technical Reports Server (NTRS)

Antle, John M.; Basso, Bruno; Conant, Richard T.; Godfray, H. Charles J.; Jones, James W.; Herrero, Mario; Howitt, Richard E.; Keating, Brian A.; Munoz-Carpena, Rafael; Rosenzweig, Cynthia

2016-01-01

This paper presents ideas for a new generation of agricultural system models that could meet the needs of a growing community of end-users exemplified by a set of Use Cases. We envision new data, models and knowledge products that could accelerate the innovation process that is needed to achieve the goal of achieving sustainable local, regional and global food security. We identify desirable features for models, and describe some of the potential advances that we envisage for model components and their integration. We propose an implementation strategy that would link a "pre-competitive" space for model development to a "competitive space" for knowledge product development and through private-public partnerships for new data infrastructure. Specific model improvements would be based on further testing and evaluation of existing models, the development and testing of modular model components and integration, and linkages of model integration platforms to new data management and visualization tools.

Towards a new generation of agricultural system data, models and knowledge products: Design and improvement.

PubMed

Antle, John M; Basso, Bruno; Conant, Richard T; Godfray, H Charles J; Jones, James W; Herrero, Mario; Howitt, Richard E; Keating, Brian A; Munoz-Carpena, Rafael; Rosenzweig, Cynthia; Tittonell, Pablo; Wheeler, Tim R

2017-07-01

This paper presents ideas for a new generation of agricultural system models that could meet the needs of a growing community of end-users exemplified by a set of Use Cases. We envision new data, models and knowledge products that could accelerate the innovation process that is needed to achieve the goal of achieving sustainable local, regional and global food security. We identify desirable features for models, and describe some of the potential advances that we envisage for model components and their integration. We propose an implementation strategy that would link a "pre-competitive" space for model development to a "competitive space" for knowledge product development and through private-public partnerships for new data infrastructure. Specific model improvements would be based on further testing and evaluation of existing models, the development and testing of modular model components and integration, and linkages of model integration platforms to new data management and visualization tools.

Scaling up HIV self-testing in sub-Saharan Africa: a review of technology, policy and evidence

PubMed Central

Indravudh, Pitchaya P.; Choko, Augustine T.; Corbett, Elizabeth L.

2018-01-01

Purpose of review HIV self-testing (HIVST) can provide complementary coverage to existing HIV testing services and improve knowledge of status among HIV-infected individuals. This review summarizes the current technology, policy and evidence landscape in sub-Saharan Africa and priorities within a rapidly evolving field. Recent findings HIVST is moving towards scaled implementation, with the release of WHO guidelines, WHO prequalification of the first HIVST product, price reductions of HIVST products and a growing product pipeline. Multicountry evidence from southern and eastern Africa confirms high feasibility, acceptability and accuracy across many delivery models and populations, with minimal harms. Evidence on the effectiveness of HIVST on increased testing coverage is strong, while evidence on demand generation for follow-on HIV prevention and treatment services and cost-effective delivery is emerging. Despite these developments, HIVST delivery remains limited outside of pilot implementation. Summary Important technology gaps include increasing availability of more sensitive HIVST products in low and middle-income countries. Regulatory and postmarket surveillance systems for HIVST also require further development. Randomized trials evaluating the effectiveness and cost-effectiveness under multiple distribution models, including unrestricted delivery and with a focus on linkage to HIV prevention and treatment, remain priorities. Diversification of studies from west and central Africa and around blood-based products should be addressed. PMID:29232277

Kids Can Be Savvy Consumers.

ERIC Educational Resources Information Center

Fuerst, Jeffrey

1995-01-01

Describes several product-testing projects designed to help students develop the skills they need to make educated purchases and be savvy consumers. The tests involve examining the taste of and ingredients in cold cereals. Other tests involve examining crayons, glue, laundry detergent, oranges, and popcorn. (SM)

Design study of arresting gear system for recovery of space shuttle orbiters

NASA Technical Reports Server (NTRS)

1972-01-01

A plan is reported for the design, manufacture, development, test, and production of an emergency arrestment system for the recovery of shuttle orbiters. Time and cost estimates are included. System testing and several optional test programs are discussed.

Malaysian consumers’ awareness, perception, and attitude toward cosmetic products: Questionnaire development and pilot testing

PubMed Central

Ayob, Ain; Awadh, Ammar Ihsan; Hadi, Hazrina; Jaffri, Juliana; Jamshed, Shazia; Ahmad, Hawa Mas Azmar

2016-01-01

Background: Increased usage of cosmetic products has caused a growing concern about the safety of these products, and yet little is known about cosmetics from the consumers’ perspective. Hence, this study's aim is to develop a valid and reliable tool for assessing consumers’ awareness, perceptions, and attitudes toward cosmetic products. Materials and Methods: A questionnaire was developed in the English language based on information collected from a literature search, in-depth interviews conducted with consumers prior to this study and consultations with experts. Subsequently, the questionnaire was subjected to translation, validation, and test-retest reliability. A final version of the questionnaire was piloted among 66 consumers via convenient sampling. A descriptive analysis was performed, and the internal consistency and the differences between variables in the questionnaire were analyzed. Results: The developed and translated questionnaire produced repeatable data for each of the domains (Spearman's correlation ≥ 0.7, P < 0.001). The internal consistency for awareness, perceptions and attitudes indicates good internal consistency (Cronbach's alpha value of more than 0.7 for each domain). Significant differences were found between the perception scores for the race, religion, and monthly expenses for cosmetic products, respectively, and the same pattern was found for the attitude scores, but monthly expenses for cosmetic products was replaced by monthly income. Conclusion: The results achieved via the Bahasa Malaysia questionnaire indicated that the developed and translated questionnaire can be used as a valid and reliable tool for assessing consumers’ awareness, perceptions, and attitudes toward cosmetic products in Malaysia in future studies. PMID:27413348

Design of clinical trials for therapeutic cancer vaccines development.

PubMed

Mackiewicz, Jacek; Mackiewicz, Andrzej

2009-12-25

Advances in molecular and cellular biology as well as biotechnology led to definition of a group of drugs referred to as medicinal products of advanced technologies. It includes gene therapy products, somatic cell therapeutics and tissue engineering. Therapeutic cancer vaccines including whole cell tumor cells vaccines or gene modified whole cells belong to somatic therapeutics and/or gene therapy products category. The drug development is a multistep complex process. It comprises of two phases: preclinical and clinical. Guidelines on preclinical testing of cell based immunotherapy medicinal products have been defined by regulatory agencies and are available. However, clinical testing of therapeutic cancer vaccines is still under debate. It presents a serious problem since recently clinical efficacy of the number of cancer vaccines has been demonstrated that focused a lot of public attention. In general clinical testing in the current form is very expensive, time consuming and poorly designed what may lead to overlooking of products clinically beneficial for patients. Accordingly regulatory authorities and researches including Cancer Vaccine Clinical Trial Working Group proposed three regulatory solutions to facilitate clinical development of cancer vaccines: cost-recovery program, conditional marketing authorization, and a new development paradigm. Paradigm includes a model in which cancer vaccines are investigated in two types of clinical trials: proof-of-principle and efficacy. The proof-of-principle trial objectives are: safety; dose selection and schedule of vaccination; and demonstration of proof-of-principle. Efficacy trials are randomized clinical trials with objectives of demonstrating clinical benefit either directly or through a surrogate. The clinical end points are still under debate.

Temporal trends of preservative allergy in Denmark (1985-2008).

PubMed

Thyssen, Jacob P; Engkilde, Kåre; Lundov, Michael D; Carlsen, Berit C; Menné, Torkil; Johansen, Jeanne D

2010-02-01

Most cosmetics and industrial products contain preservatives. Preservative allergy is common and, historically, changing contact allergy epidemics caused by preservatives have been observed. In 1997, Alan Dillarstone predicted a stable development of preservative allergy following mandatory ingredient labelling on cosmetic products. To investigate the development in the prevalence of preservative allergy in Denmark over a 24-year period (1985-2008) and to challenge the prediction made by Dillarstone. A retrospective analysis of patch test data was performed (n = 18179). Comparisons were made using a chi(2) test. Logistic regression analyses were used to test for associations. The development of preservative allergy mirrored those of other European patch test centres. The development was not dependent on sex or age group. The prevalence was higher among women and those aged 41-60 years. Formaldehyde allergy was persistently prevalent over the study years. The overall prevalence of preservative allergy increased significantly (P(trend) = 0.001), mainly because of patch testing with additional preservatives in recent years. Dillarstone's prediction was confirmed as the prevalence of contact allergy to individual preservatives remained relatively stable. However, the overall burden of preservative allergy seemed to increase. Introduction of new preservatives may add to the burden of contact allergy.

A novel heuristic for optimization aggregate production problem: Evidence from flat panel display in Malaysia

NASA Astrophysics Data System (ADS)

Al-Kuhali, K.; Hussain M., I.; Zain Z., M.; Mullenix, P.

2015-05-01

Aim: This paper contribute to the flat panel display industry it terms of aggregate production planning. Methodology: For the minimization cost of total production of LCD manufacturing, a linear programming was applied. The decision variables are general production costs, additional cost incurred for overtime production, additional cost incurred for subcontracting, inventory carrying cost, backorder costs and adjustments for changes incurred within labour levels. Model has been developed considering a manufacturer having several product types, which the maximum types are N, along a total time period of T. Results: Industrial case study based on Malaysia is presented to test and to validate the developed linear programming model for aggregate production planning. Conclusion: The model development is fit under stable environment conditions. Overall it can be recommended to adapt the proven linear programming model to production planning of Malaysian flat panel display industry.

The Behind-the-Knee test: an efficient model for evaluating mechanical and chemical irritation.

PubMed

Farage, Miranda A

2006-05-01

The 'Behind-the-Knee' method (BTK test), using the popliteal fossa as a test site, evaluates both the inherent chemical irritation, and the potential for mechanical irritation of substrates and products. This approach eliminates some of the difficulties of in-use clinical test systems while still providing reliable results. In this publication, examples of the results of BTK tests on several materials are presented with direct comparisons, where possible, with results of in-use clinical testing conducted on the same materials. In in-use clinical tests, volunteer panelists were provided with catamenial products to use in place of their normal product. In the BTK test, samples were applied daily to the popliteal fossa using an elastic athletic band. In both studies, irritation reactions were scored visually. Levels of irritation in the BTK test are consistently higher than those of standard patch tests, illustrating the contribution of mechanical irritation to the overall irritant potential of materials and products. Repeated tests on identical test materials demonstrated that the BTK test results are reproducible. Side-by-side comparisons of the BTK test and in-use clinical tests demonstrated that the BTK test produces results of similar quality to the in-use clinical. By using several concurrent panels with a common test material, it is possible to compare the irritant properties of several materials at once. We have tested over 25 different materials in over 35 BTK studies. The test method has proven reliable and versatile in testing a wide variety of materials, including menstrual pads, topsheets, interlabial pads, pantiliners, tampons and lotion coatings on products. Unlike in-use clinicals, the BTK test allows the direct comparison of two products at one time on the same individual, and is easily adapted to investigative programs. It is subject to fewer confounding factors, is much easier to implement, has a shorter turnaround time, and is less expensive than in-use clinical testing. Importantly, unlike standard patch tests, the BTK test evaluates both the inherent chemical irritation associated with materials and the mechanical irritation owing to friction. Although the BTK test was developed using catamenial products, the test system provides a valuable alternative for evaluating any material where mechanical irritation may play a role, including textiles, facial tissues, baby and adult diapers, and laundry products that may leave residues on fabrics.

40 CFR 80.1651 - Product transfer document requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., “This gasoline is for use in vehicles, engines, or equipment under an EPA-approved national security exemption only.” (2) For gasoline with a research, development, or testing exemption under § 80.1656, “This gasoline is for research, development, or testing purposes only.” (3) For gasoline for use in American...

Guidelines on Pilot and Field Testing of Curriculum Products.

ERIC Educational Resources Information Center

Contract Research Corp., Belmont, MA.

This booklet is intended to aid curriculum developers in designing and conducting pilot or field tests that yield useful information and sound evidence about the effectiveness of new curricula. Although it was prepared specifically for use by projects funded by the Curriculum Development Branch of the federal Bureau of Occupational and Adult…

Development and Field Tests of the Army Work Environment Questionnaire

DTIC Science & Technology

1987-05-01

from the low teens to the mid-twenties), a number of consistent trends were found in the pattern of relationships. In both field tests, the largest...identifying impediments to productivity (UPRDC TR-81-18). San Diego, CA: Navy Personnel Research and Development Center. 39 Appendix A iiOONMwc IUCIDU PORN

CPAS Preflight Drop Test Analysis Process

NASA Technical Reports Server (NTRS)

Englert, Megan E.; Bledsoe, Kristin J.; Romero, Leah M.

2015-01-01

Throughout the Capsule Parachute Assembly System (CPAS) drop test program, the CPAS Analysis Team has developed a simulation and analysis process to support drop test planning and execution. This process includes multiple phases focused on developing test simulations and communicating results to all groups involved in the drop test. CPAS Engineering Development Unit (EDU) series drop test planning begins with the development of a basic operational concept for each test. Trajectory simulation tools include the Flight Analysis and Simulation Tool (FAST) for single bodies, and the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) simulation for the mated vehicle. Results are communicated to the team at the Test Configuration Review (TCR) and Test Readiness Review (TRR), as well as at Analysis Integrated Product Team (IPT) meetings in earlier and intermediate phases of the pre-test planning. The ability to plan and communicate efficiently with rapidly changing objectives and tight schedule constraints is a necessity for safe and successful drop tests.

A modern space simulation facility to accommodate high production acceptance testing

NASA Technical Reports Server (NTRS)

Glover, J. D.

1986-01-01

A space simulation laboratory that supports acceptance testing of spacecraft and associated subsystems at throughput rates as high as nine per year is discussed. The laboratory includes a computer operated 27' by 30' space simulation, a 20' by 20' by 20' thermal cycle chamber and an eight station thermal cycle/thermal vacuum test system. The design philosophy and unique features of each system are discussed. The development of operating procedures, test team requirements, test team integration, and other peripheral activation details are described. A discussion of special accommodations for the efficient utilization of the systems in support of high rate production is presented.

Development and production of second generation high Tc superconducting tapes at SuperOx and first tests of model cables

NASA Astrophysics Data System (ADS)

Lee, S.; Petrykin, V.; Molodyk, A.; Samoilenkov, S.; Kaul, A.; Vavilov, A.; Vysotsky, V.; Fetisov, S.

2014-04-01

The SuperOx and SuperOx Japan LLC companies were founded with the goal of developing a cost-effective technology for second generation HTS (2G HTS) tapes by utilizing a combination of the most advanced chemical and physical deposition techniques, together with implementing original tape architectures. In this paper we present a brief overview of our production and experimental facilities and recent results of 2G HTS tape fabrication, and describe the first tests of the tapes in model cables for AC and DC power application.

Data Driven Professional Development Design for Out-of-School Time Educators Using Planetary Science and Engineering Educational Materials

NASA Astrophysics Data System (ADS)

Clark, J.; Bloom, N.

2017-12-01

Data driven design practices should be the basis for any effective educational product, particularly those used to support STEM learning and literacy. Planetary Learning that Advances the Nexus of Engineering, Technology, and Science (PLANETS) is a five-year NASA-funded (NNX16AC53A) interdisciplinary and cross-institutional partnership to develop and disseminate STEM out-of-school time (OST) curricular and professional development units that integrate planetary science, technology, and engineering. The Center for Science Teaching and Learning at Northern Arizona University, the U.S. Geological Survey Astrogeology Science Center, and the Museum of Science Boston are partners in developing, piloting, and researching the impact of three out of school time units. Two units are for middle grades youth and one is for upper elementary aged youth. The presentation will highlight the data driven development process of the educational products used to provide support for educators teaching these curriculum units. This includes how data from the project needs assessment, curriculum pilot testing, and professional support product field tests are used in the design of products for out of school time educators. Based on data analysis, the project is developing and testing four tiers of professional support for OST educators. Tier 1 meets the immediate needs of OST educators to teach curriculum and include how-to videos and other direct support materials. Tier 2 provides additional content and pedagogical knowledge and includes short content videos designed to specifically address the content of the curriculum. Tier 3 elaborates on best practices in education and gives guidance on methods, for example, to develop cultural relevancy for underrepresented students. Tier 4 helps make connections to other NASA or educational products that support STEM learning in out of school settings. Examples of the tiers of support will be provided.

Flammability testing of 22 conventional European pediculicides.

PubMed

Dörge, Dorian D; Kuhn, Thomas; Klimpel, Sven

2017-04-01

Lice have been parasitizing humans for at least 10,000 years. Since then, humans have tried to rid themselves of these unpleasant and potentially disease-carrying insects. Despite various plant extracts and chemical compounds being used to combat recurring infestations to this date, several lice populations have developed resistance to some of the abundantly used compounds. This resulted in the development of anti-louse products that physically kill the different lice stages. Today, a widely used group of delousing agents are dimethicones (polydimethylsiloxane PDMS) which function by suffocating the lice. However, many dimethicones and related products are highly flammable which makes them potentially dangerous for treatment. In the present study, we tested the flammability of 22 delousing agents in order to shed some light onto this currently unresolved problem in the product design of pediculicides. Thirteen products were easily ignitable, some even by distant contact with a sparkler.

Environmental Systems Test Stand

NASA Astrophysics Data System (ADS)

Barta, D.; Young, J.; Ewert, M.; Lee, S.; Wells, P.; Fortson, R.; Castillo, J.

A test stand has been developed for the evaluation of prototype lighting, environmental control and crop cultivation technologies for plant production within an advanced life support system. Design of the test stand was based on preliminary designs of the center growth bay of the Biomass Production Chamber, one of several modules of the Bioregenerative Planetary Life Support Systems Test Complex (BIO- Plex). It consists of two controlled-environment shelves, each with 4.7 m2 of area for crop growth (150 cm width, 315 cm length). There are two chilled water loops, one for operation at conventional temperatures (5-10C) for air temperature and humidity control and one for operation at higher temperatures (15-50C) for waste heat acquisition and heating. Modular light boxes, utilizing either air-cooled or water- jacketed HPS lamps, have been developed. This modular design will allow for easy replacement of new lighting technologies within the light banks. An advanced data acquisition and control system has been developed utilizing localized, networked- based data acquisition modules and programmed with object-based control software.

Biodetection grinder

NASA Technical Reports Server (NTRS)

Shaia, C. D.; Jones, G. H.

1971-01-01

Work on a biodetection grinder is summarized. It includes development of the prototype grinder, second generation grinder, and the production version of the grinder. Tests showed the particle size distribution was satisfactory and biological evaluation confirmed the tests.

Development of real-time PCR methods to quantify patulin-producing molds in food products.

PubMed

Rodríguez, Alicia; Luque, M Isabel; Andrade, María J; Rodríguez, Mar; Asensio, Miguel A; Córdoba, Juan J

2011-09-01

Patulin is a mycotoxin produced by different Penicillium and Aspergillus strains isolated from food products. To improve food safety, the presence of patulin-producing molds in foods should be quantified. In the present work, two real-time (RTi) PCR protocols based on SYBR Green and TaqMan were developed. Thirty four patulin producers and 28 non-producers strains belonging to different species usually reported in food products were used. The patulin production was tested by mycellar electrokinetic capillary electrophoresis (MECE) and high-pressure liquid chromatography-mass spectrometry (HPLC-MS). A primer pair F-idhtrb/R-idhtrb and the probe IDHprobe were designed from the isoepoxydon dehydrogenase (idh) gene, involved in patulin biosynthesis. The functionality of the developed method was demonstrated by the high linear relationship of the standard curves constructed with the idh gene copy number and Ct values for the different patulin producers tested. The ability to quantify patulin producers of the developed SYBR Green and TaqMan assays in artificially inoculated food samples was successful, with a minimum threshold of 10 conidia g(-1) per reaction. The developed methods quantified with high efficiency fungal load in foods. These RTi-PCR protocols, are proposed to be used to quantify patulin-producing molds in food products and to prevent patulin from entering the food chain. Copyright © 2011 Elsevier Ltd. All rights reserved.

Benchmarking in pathology: development of a benchmarking complexity unit and associated key performance indicators.

PubMed

Neil, Amanda; Pfeffer, Sally; Burnett, Leslie

2013-01-01

This paper details the development of a new type of pathology laboratory productivity unit, the benchmarking complexity unit (BCU). The BCU provides a comparative index of laboratory efficiency, regardless of test mix. It also enables estimation of a measure of how much complex pathology a laboratory performs, and the identification of peer organisations for the purposes of comparison and benchmarking. The BCU is based on the theory that wage rates reflect productivity at the margin. A weighting factor for the ratio of medical to technical staff time was dynamically calculated based on actual participant site data. Given this weighting, a complexity value for each test, at each site, was calculated. The median complexity value (number of BCUs) for that test across all participating sites was taken as its complexity value for the Benchmarking in Pathology Program. The BCU allowed implementation of an unbiased comparison unit and test listing that was found to be a robust indicator of the relative complexity for each test. Employing the BCU data, a number of Key Performance Indicators (KPIs) were developed, including three that address comparative organisational complexity, analytical depth and performance efficiency, respectively. Peer groups were also established using the BCU combined with simple organisational and environmental metrics. The BCU has enabled productivity statistics to be compared between organisations. The BCU corrects for differences in test mix and workload complexity of different organisations and also allows for objective stratification into peer groups.

Test Driven Development of Scientific Models

NASA Technical Reports Server (NTRS)

Clune, Thomas L.

2014-01-01

Test-Driven Development (TDD), a software development process that promises many advantages for developer productivity and software reliability, has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices.After a brief overview of the TDD process and my experience in applying the methodology for development activities at Goddard, I will delve more deeply into some of the challenges that are posed by numerical and scientific software as well as tools and implementation approaches that should address those challenges.

Advances in neglected tropical disease vaccines: Developing relative potency and functional assays for the Na-GST-1/Alhydrogel hookworm vaccine.

PubMed

Brelsford, Jill B; Plieskatt, Jordan L; Yakovleva, Anna; Jariwala, Amar; Keegan, Brian P; Peng, Jin; Xia, Pengjun; Li, Guangzhao; Campbell, Doreen; Periago, Maria Victoria; Correa-Oliveira, Rodrigo; Bottazzi, Maria Elena; Hotez, Peter J; Diemert, David; Bethony, Jeffrey M

2017-02-01

A new generation of vaccines for the neglected tropical diseases (NTDs) have now advanced into clinical development, with the Na-GST-1/Alhydrogel Hookworm Vaccine already being tested in Phase 1 studies in healthy adults. The current manuscript focuses on the often overlooked critical aspects of NTD vaccine product development, more specifically, vaccine stability testing programs. A key measure of vaccine stability testing is "relative potency" or the immunogenicity of the vaccine during storage. As with most NTD vaccines, the Na-GST-1/Alhydrogel Hookworm Vaccine was not developed by attenuation or inactivation of the pathogen (Necator americanus), so conventional methods for measuring relative potency are not relevant for this investigational product. Herein, we describe a novel relative potency testing program and report for the first time on the clinical lot of this NTD vaccine during its first 60 months of storage at 2-8°C. We also describe the development of a complementary functional assay that measures the ability of IgG from animals or humans immunized with Na-GST-1/Alhydrogel to neutralize this important hookworm enzyme. While 90% inhibition of the catalytic activity of Na-GST-1 was achieved in animals immunized with Na-GST-1/Alhydrogel, lower levels of inhibition were observed in immunized humans. Moreover, anti-Na-GST-1 antibodies from volunteers in non-hookworm endemic areas were better able to inhibit catalytic activity than anti-Na-GST-1 antibodies from volunteers resident in hookworm endemic areas. The results described herein provide the critical tools for the product development of NTD vaccines.

Results of data base management system parameterized performance testing related to GSFC scientific applications

NASA Technical Reports Server (NTRS)

Carchedi, C. H.; Gough, T. L.; Huston, H. A.

1983-01-01

The results of a variety of tests designed to demonstrate and evaluate the performance of several commercially available data base management system (DBMS) products compatible with the Digital Equipment Corporation VAX 11/780 computer system are summarized. The tests were performed on the INGRES, ORACLE, and SEED DBMS products employing applications that were similar to scientific applications under development by NASA. The objectives of this testing included determining the strength and weaknesses of the candidate systems, performance trade-offs of various design alternatives and the impact of some installation and environmental (computer related) influences.

Benchmarking expert system tools

NASA Technical Reports Server (NTRS)

Riley, Gary

1988-01-01

As part of its evaluation of new technologies, the Artificial Intelligence Section of the Mission Planning and Analysis Div. at NASA-Johnson has made timing tests of several expert system building tools. Among the production systems tested were Automated Reasoning Tool, several versions of OPS5, and CLIPS (C Language Integrated Production System), an expert system builder developed by the AI section. Also included in the test were a Zetalisp version of the benchmark along with four versions of the benchmark written in Knowledge Engineering Environment, an object oriented, frame based expert system tool. The benchmarks used for testing are studied.

Definition study for variable cycle engine testbed engine and associated test program

NASA Technical Reports Server (NTRS)

Vdoviak, J. W.

1978-01-01

The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

Using Quality Management Systems to Improve Test Development and Standards and to Promote Good Practice: A Case Study of Testing Italian as a Foreign Language

ERIC Educational Resources Information Center

Grego Bolli, Giuliana

2014-01-01

This article discusses the problem of quality in the production of language tests in the context of Italian language examinations. The concept of quality is closely related to the application of stated standards and related procedures. These standards, developed over the last thirty years, are mainly related to the concepts of the accountability…

Experience with specifications applicable to certification. [of photovoltaic modules for large-scale application

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.

1982-01-01

The Jet Propulsion Laboratory has developed a number of photovoltaic test and measurement specifications to guide the development of modules toward the requirements of future large-scale applications. Experience with these specifications and the extensive module measurement and testing that has accompanied their use is examined. Conclusions are drawn relative to three aspects of product certification: performance measurement, endurance testing and safety evaluation.

Integrated Component-based Data Acquisition Systems for Aerospace Test Facilities

NASA Technical Reports Server (NTRS)

Ross, Richard W.

2001-01-01

The Multi-Instrument Integrated Data Acquisition System (MIIDAS), developed by the NASA Langley Research Center, uses commercial off the shelf (COTS) products, integrated with custom software, to provide a broad range of capabilities at a low cost throughout the system s entire life cycle. MIIDAS combines data acquisition capabilities with online and post-test data reduction computations. COTS products lower purchase and maintenance costs by reducing the level of effort required to meet system requirements. Object-oriented methods are used to enhance modularity, encourage reusability, and to promote adaptability, reducing software development costs. Using only COTS products and custom software supported on multiple platforms reduces the cost of porting the system to other platforms. The post-test data reduction capabilities of MIIDAS have been installed at four aerospace testing facilities at NASA Langley Research Center. The systems installed at these facilities provide a common user interface, reducing the training time required for personnel that work across multiple facilities. The techniques employed by MIIDAS enable NASA to build a system with a lower initial purchase price and reduced sustaining maintenance costs. With MIIDAS, NASA has built a highly flexible next generation data acquisition and reduction system for aerospace test facilities that meets customer expectations.

Augmenting SCA project management and automation framework

NASA Astrophysics Data System (ADS)

Iyapparaja, M.; Sharma, Bhanupriya

2017-11-01

In our daily life we need to keep the records of the things in order to manage it in more efficient and proper way. Our Company manufactures semiconductor chips and sale it to the buyer. Sometimes it manufactures the entire product and sometimes partially and sometimes it sales the intermediary product obtained during manufacturing, so for the better management of the entire process there is a need to keep the track record of all the entity involved in it. Materials and Methods: Therefore to overcome with the problem the need raised to develop the framework for the maintenance of the project and for the automation testing. Project management framework provides an architecture which supports in managing the project by marinating the records of entire requirements, the test cases that were created for testing each unit of the software, defect raised from the past years. So through this the quality of the project can be maintained. Results: Automation framework provides the architecture which supports the development and implementation of the automation test script for the software testing process. Conclusion: For implementing project management framework the product of HP that is Application Lifecycle management is used which provides central repository to maintain the project.

[Recent developments on the European ban on animal experiments for cosmetics].

PubMed

Ruhdel, I W

2001-01-01

For the second time the European Commission has postponed the sales ban on cosmetics products that have been developed and tested in animal experiments now until 2002. In the meantime the Commission wants to adopt the Seventh Amendment of the EU Cosmetics Directive. In its draft the Commission proposes to scrap the sales ban and replace it with an animal testing ban. This change would avoid possible conflicts with the WTO, however, from the animal welfare point of view would result in animal testing moving into third countries instead of avoiding them. This is because cosmetics products tested on animals outside the EU could be sold in the EU without any restrictions. As a consequence this measure would take the pressure from authorities and industry to further develop and adopt alternative methods. Other proposed measures are not acceptable from the animal welfare point of view, e.g. because they contradict Directive 86/609 and would result in a delay of the application of validated alternative methods. The Deutscher Tierschutzbund therefore still demands an immediate and complete sales ban in connection with an animal testing ban within the EU.

Development of in situ product removal strategies in biocatalysis applying scaled-down unit operations.

PubMed

Heintz, Søren; Börner, Tim; Ringborg, Rolf H; Rehn, Gustav; Grey, Carl; Nordblad, Mathias; Krühne, Ulrich; Gernaey, Krist V; Adlercreutz, Patrick; Woodley, John M

2017-03-01

An experimental platform based on scaled-down unit operations combined in a plug-and-play manner enables easy and highly flexible testing of advanced biocatalytic process options such as in situ product removal (ISPR) process strategies. In such a platform, it is possible to compartmentalize different process steps while operating it as a combined system, giving the possibility to test and characterize the performance of novel process concepts and biocatalysts with minimal influence of inhibitory products. Here the capabilities of performing process development by applying scaled-down unit operations are highlighted through a case study investigating the asymmetric synthesis of 1-methyl-3-phenylpropylamine (MPPA) using ω-transaminase, an enzyme in the sub-family of amino transferases (ATAs). An on-line HPLC system was applied to avoid manual sample handling and to semi-automatically characterize ω-transaminases in a scaled-down packed-bed reactor (PBR) module, showing MPPA as a strong inhibitor. To overcome the inhibition, a two-step liquid-liquid extraction (LLE) ISPR concept was tested using scaled-down unit operations combined in a plug-and-play manner. Through the tested ISPR concept, it was possible to continuously feed the main substrate benzylacetone (BA) and extract the main product MPPA throughout the reaction, thereby overcoming the challenges of low substrate solubility and product inhibition. The tested ISPR concept achieved a product concentration of 26.5 g MPPA  · L -1 , a purity up to 70% g MPPA  · g tot -1 and a recovery in the range of 80% mol · mol -1 of MPPA in 20 h, with the possibility to increase the concentration, purity, and recovery further. Biotechnol. Bioeng. 2017;114: 600-609. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[JUSTIFICATION OF USING EQUIVALENCE OF THE INDICES OF QUALITY, SAFETY, AND EFFICACY IN DEVELOPING BIOANALOGS].

PubMed

Niyazov, R R; Goryachev, D V; Gavrishina, E V; Romodanovskii, D P; Dranitsyna, M A

2015-01-01

We describe general principles of demonstrating biosimilarity, as well as selecting the biosimilarity margins. Any change in the structure of a biological molecule can modify its functional activity. Therefore, therapeutic equivalence between a biosimilar product and the corresponding reference product cannot be demonstrated using a single criterion. To demonstrate biosimilarity between two medicinal products, their various characteristics have to be evaluated which may, directly or indirectly, justify that clinically significant differences are absent. Insufficient understanding of 6ritical quality attributes brings a risk for the biosimilar product developer. This will either increase the number of non-clinical and clinical tests and trials needed or will result in awareness that the manufacturing process needs to be improved at the late stages of development, after investing significant resources in the development process. At the same time, the specification of the biological medicinal product cannot solely ensure safety and efficacy thereof. Properly characterized and controlled manufacturing process, which ensures consistency in its attributes not adequately controlled in specifications but influencing safety and efficacy profiles and showing their relevance in non-clinical tests and clinical trials, is an additional quality assurance factor. Justification of all development strategy details, including biosimilarity margins, has to be provided each time when the development process is initiated or when proceeding to the next steps. All problems encountered by the developer have to be resolved in close communication with the regulatory authority. In order to increase the quality of investigation and developer's adherence to good practices, clinical trial results should be published in detail.

An expanded nuclear phylogenomic PCR toolkit for Sapindales1

PubMed Central

Collins, Elizabeth S.; Gostel, Morgan R.; Weeks, Andrea

2016-01-01

Premise of the study: We tested PCR amplification of 91 low-copy nuclear gene loci in taxa from Sapindales using primers developed for Bursera simaruba (Burseraceae). Methods and Results: Cross-amplification of these markers among 10 taxa tested was related to their phylogenetic distance from B. simaruba. On average, each Sapindalean taxon yielded product for 53 gene regions (range: 16–90). Arabidopsis thaliana (Brassicales), by contrast, yielded product for two. Single representatives of Anacardiaceae and Rutacaeae yielded 34 and 26 products, respectively. Twenty-six primer pairs worked for all Burseraceae species tested if highly divergent Aucoumea klaineana is excluded, and eight of these amplified product in every Sapindalean taxon. Conclusions: Our study demonstrates that customized primers for Bursera can amplify product in a range of Sapindalean taxa. This collection of primer pairs, therefore, is a valuable addition to the toolkit for nuclear phylogenomic analyses of Sapindales and warrants further investigation. PMID:28101434

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gromov, R.; Bailey, J.; Virgo, M.

Argonne National Laboratory, in cooperation with Los Alamos National Laboratory, is developing technology with NorthStar Medical Technologies to produce 99Mo from the γ,n reaction on a 100Mo target in an electron accelerator. During production runs and thermal testing of the helium-cooled target, it became obvious that a production-scale beam-line configuration would need a collimator to protect the target from accidental beam misplacement or a beam-profile change. A prototype high-power collimator and beam stop were designed and fabricated. Testing indicated that they will be able to operate at full power in the production-scale accelerator.

Early Combination of Material Characteristics and Toxicology Is Useful in the Design of Low Toxicity Carbon Nanofiber

PubMed Central

Jensen, Ellen K.; Larsen, Sten Y.; Nygaard, Unni C.; Marioara, Calin D.; Syversen, Tore

2012-01-01

This paper describes an approach for the early combination of material characterization and toxicology testing in order to design carbon nanofiber (CNF) with low toxicity. The aim was to investigate how the adjustment of production parameters and purification procedures can result in a CNF product with low toxicity. Different CNF batches from a pilot plant were characterized with respect to physical properties (chemical composition, specific surface area, morphology, surface chemistry) as well as toxicity by in vitro and in vivo tests. A description of a test battery for both material characterization and toxicity is given. The results illustrate how the adjustment of production parameters and purification, thermal treatment in particular, influence the material characterization as well as the outcome of the toxic tests. The combination of the tests early during product development is a useful and efficient approach when aiming at designing CNF with low toxicity. Early quality and safety characterization, preferably in an iterative process, is expected to be efficient and promising for this purpose. The toxicity tests applied are preliminary tests of low cost and rapid execution. For further studies, effects such as lung inflammation, fibrosis and respiratory cancer are recommended for the more in-depth studies of the mature CNF product.

Antarctic Testing of the European Ultrasonic Planetary Core Drill (UPCD)

NASA Astrophysics Data System (ADS)

Timoney, R.; Worrall, K.; Li, X.; Firstbrook, D.; Harkness, P.

2018-04-01

An overview of a series of field testing in Antarctica where the Ultrasonic Planetary Core Drill (UPCD) architecture was tested. The UPCD system is the product an EC FP7 award to develop a Mars Sample Return architecture based around the ultrasonic technique.

Profile of a cell test database and a corresponding reliability database

NASA Technical Reports Server (NTRS)

Brearley, George R.; Klein, Glenn C.

1992-01-01

The development of computerized control, and data retrieval for aerospace cell testing affords an excellent opportunity to incorporate three specific concepts to both manage the test area and to track product performance on a real-time basis. The adoption and incorporation of precepts fostered by this total quality management (TQM) initiative are critical to us for retaining control of our business while substantially reducing the separate quality control inspection activity. Test discrepancies are all 'equally bad' in cell acceptance testing because, for example, we presently do not discriminate between 1 or 25 mV for an overvoltage condition. We must take leadership in classifying such discrepancies in order to expedite their clearance and redirect our resources for prevention activities. The development and use of engineering alerts (or guardbanding) which more closely match our product capabilities and are toleranced tighter than the required customer specification are paramount to managing the test unit in order to remain both quality and cost effective.

Melter Throughput Enhancements for High-Iron HLW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, A. A.; Gan, Hoa; Joseph, Innocent

2012-12-26

This report describes work performed to develop and test new glass and feed formulations in order to increase glass melting rates in high waste loading glass formulations for HLW with high concentrations of iron. Testing was designed to identify glass and melter feed formulations that optimize waste loading and waste processing rate while meeting all processing and product quality requirements. The work included preparation and characterization of crucible melts to assess melt rate using a vertical gradient furnace system and to develop new formulations with enhanced melt rate. Testing evaluated the effects of waste loading on glass properties and themore » maximum waste loading that can be achieved. The results from crucible-scale testing supported subsequent DuraMelter 100 (DM100) tests designed to examine the effects of enhanced glass and feed formulations on waste processing rate and product quality. The DM100 was selected as the platform for these tests due to its extensive previous use in processing rate determination for various HLW streams and glass compositions.« less

[Role of food interaction pharmacokinetic studies in drug development. Food interaction studies of theophylline and nifedipine retard and buspirone tablets].

PubMed

Drabant, S; Klebovich, I; Gachályi, B; Renczes, G; Farsang, C

1998-09-01

Due to several mechanism, meals may modify the pharmacokinetics of drug products, thereby eliciting to clinically significant food interaction. Food interactions with the drug substance and with the drug formulation should be distinguished. Food interaction of different drug products containing the same active ingredient can be various depending on the pharmaceutical formulation technology. Particularly, in the case of modified release products, the food/formulation interaction can play an important role in the development of food interaction. Well known example, that bioavailability of theophylline can be influenced in different way (either increased, decreased or unchanged) by concomitant intake of food in the case of different sustained release products. The role and methods of food interaction studies in the different kinds of drug development (new chemical entity, modified release products, generics) are reviewed. Prediction of food effect response on the basis of the physicochemical and pharmacokinetic characteristics of the drug molecule or formulations is discussed. The results of three food interaction studies carried out the products of EGIS Pharmaceuticals Ltd. are also reviewed. The pharmacokinetic parameters of theophyllin 400 mg retard tablet were practically the same in both fasting condition and administration after consumption of a high fat containing standard breakfast. The ingestion of a high fat containing breakfast, increased the AUC of nifedipine from 259.0 +/- 101.2 ng h/ml to 326.7 +/- 122.5 ng h/ml and Cmax from 34.5 +/- 15.9 ng/ml to 74.3 +/- 23.9 ng/ml in case of nifedipine 20 mg retard tablet, in agreement with the data of literature. The statistical evaluation indicated significant differences between the pharmacokinetic parameters in the case of two administrations (before and after meal). The effect of a high fat containing breakfast for a generic version of buspiron 10 mg tablet and the bioequivalence after food consumption were studied in a single-dose, three-way (test and reference products administered after consumption of standard breakfast, as well as test product in fasting condition), cross-over, food effect bioequivalence study. According to the results, the test product--which, in a former study proved to be bioequivalent with the reference product in fasting state--is bioequivalent with the reference product under feeding conditions and the food intake influenced the pharmacokinetics of the test tablets.

Improving ATLAS grid site reliability with functional tests using HammerCloud

NASA Astrophysics Data System (ADS)

Elmsheuser, Johannes; Legger, Federica; Medrano Llamas, Ramon; Sciacca, Gianfranco; van der Ster, Dan

2012-12-01

With the exponential growth of LHC (Large Hadron Collider) data in 2011, and more coming in 2012, distributed computing has become the established way to analyse collider data. The ATLAS grid infrastructure includes almost 100 sites worldwide, ranging from large national computing centers to smaller university clusters. These facilities are used for data reconstruction and simulation, which are centrally managed by the ATLAS production system, and for distributed user analysis. To ensure the smooth operation of such a complex system, regular tests of all sites are necessary to validate the site capability of successfully executing user and production jobs. We report on the development, optimization and results of an automated functional testing suite using the HammerCloud framework. Functional tests are short lightweight applications covering typical user analysis and production schemes, which are periodically submitted to all ATLAS grid sites. Results from those tests are collected and used to evaluate site performances. Sites that fail or are unable to run the tests are automatically excluded from the PanDA brokerage system, therefore avoiding user or production jobs to be sent to problematic sites.

FDA perspective on specifications for biotechnology products--from IND to PLA.

PubMed

Murano, G

1997-01-01

Quality standards are obligatory throughout development, approval and post-marketing phases of biotechnology-derived products, thus assuring product identity, purity, and potency/strength. The process of developing and setting specifications should be based on sound science and should represent a logical progression of actions based on the use of experiential data spanning manufacturing process validation, consistency in production, and characterization of relevant product properties/attributes, by multiple analytical means. This interactive process occurs in phases, varying in rigour. It is best described as encompassing a framework which starts with the implementation of realistic/practical operational quality limits, progressing to the establishment/adoption of more stringent specifications. The historical database is generated from preclinical, toxicology and early clinical lots. This supports the clinical development programme which, as it progresses, allows for further assay method validation/refinement, adoption/addition due to relevant or newly recognized product attributes or rejection due to irrelevance. In the next phase, (licensing/approval) specifications are set through extended experience and validation of both the preparative and analytical processes, to include availability of suitable reference standards and extensive product characterization throughout its proposed dating period. Subsequent to product approval, the incremental database of test results serves as a natural continuum for further evolving/refining specifications. While there is considerable latitude in the kinds of testing modalities finally adopted to establish product quality on a routine basis, for both drugs and drug products, it is important that the selection takes into consideration relevant (significant) product characteristics that appropriately reflect on identity, purity and potency.

Taking advantage of ground data systems attributes to achieve quality results in testing software

NASA Technical Reports Server (NTRS)

Sigman, Clayton B.; Koslosky, John T.; Hageman, Barbara H.

1994-01-01

During the software development life cycle process, basic testing starts with the development team. At the end of the development process, an acceptance test is performed for the user to ensure that the deliverable is acceptable. Ideally, the delivery is an operational product with zero defects. However, the goal of zero defects is normally not achieved but is successful to various degrees. With the emphasis on building low cost ground support systems while maintaining a quality product, a key element in the test process is simulator capability. This paper reviews the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) test tool that is used in the acceptance test process for unmanned satellite operations control centers. The TASS is designed to support the development, test and operational environments of the Goddard Space Flight Center (GSFC) operations control centers. The TASS uses the same basic architecture as the operations control center. This architecture is characterized by its use of distributed processing, industry standards, commercial off-the-shelf (COTS) hardware and software components, and reusable software. The TASS uses much of the same TPOCC architecture and reusable software that the operations control center developer uses. The TASS also makes use of reusable simulator software in the mission specific versions of the TASS. Very little new software needs to be developed, mainly mission specific telemetry communication and command processing software. By taking advantage of the ground data system attributes, successful software reuse for operational systems provides the opportunity to extend the reuse concept into the test area. Consistency in test approach is a major step in achieving quality results.

Laboratory Scale Coal And Biomass To Drop-In Fuels (CBDF) Production And Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lux, Kenneth; Imam, Tahmina; Chevanan, Nehru

This Final Technical Report describes the work and accomplishments of the project entitled, “Laboratory Scale Coal and Biomass to Drop-In Fuels (CBDF) Production and Assessment.” The main objective of the project was to fabricate and test a lab-scale liquid-fuel production system using coal containing different percentages of biomass such as corn stover and switchgrass at a rate of 2 liters per day. The system utilizes the patented Altex fuel-production technology, which incorporates advanced catalysts developed by Pennsylvania State University. The system was designed, fabricated, tested, and assessed for economic and environmental feasibility relative to competing technologies.

Absorbing Software Testing into the Scrum Method

NASA Astrophysics Data System (ADS)

Tuomikoski, Janne; Tervonen, Ilkka

In this paper we study, how to absorb software testing into the Scrum method. We conducted the research as an action research during the years 2007-2008 with three iterations. The result showed that testing can and even should be absorbed to the Scrum method. The testing team was merged into the Scrum teams. The teams can now deliver better working software in a shorter time, because testing keeps track of the progress of the development. Also the team spirit is higher, because the Scrum team members are committed to the same goal. The biggest change from test manager’s point of view was the organized Product Owner Team. Test manager don’t have testing team anymore, and in the future all the testing tasks have to be assigned through the Product Backlog.

A product lifecycle management framework to support the exchange of prototyping and testing information

NASA Astrophysics Data System (ADS)

Toche Fumchum, Luc Boris

2011-12-01

The modern perspective on product life cycle and the rapid evolution of Information and Communication Technologies in general have opened a new era in product representation and product information sharing between participants, both inside and outside the enterprise and throughout the product life. In particular, the Product Development Process relies on cross-functional activities involving different domains of expertise that each have their own dedicated tools. This has generated new challenges in terms of collaboration and dissemination of information at large between companies or even within the same organization. Within this context, the work reported herein focuses on a specific stakeholder within product development activities - the prototyping and testing department. Its business is typically related to the planning and building of prototypes in order to perform specific tests on the future product or one of its sub-assemblies. The research project aims at investigating an appropriate framework that leverages configured engineering product information, based on complementary information structures, to share and exchange prototyping and testing information in a Product Lifecycle Management (PLM) perspective. As a first step, a case study based on the retrofit of an aircraft engine is deployed to implement a scenario demonstrating the functionalities to be available within the intended framework. For this purpose, complementary and configurable structures are simulated within the project's PLM system. In a second step are considered the software interoperability issues that don't only affect Design -- Testing interactions, but many other interfaces within either the company -- due to the silo-arrangement -- or the consortiums with partners, in which case the whole PLM platforms could simply be incompatible. A study based on an open source initiative and relying on an improved model of communication is described to show how two natively disparate PLM tools can dialogue to merge information in a central environment. The principles applied in both steps are therefore transposed to introduce the Open Exchange Nest as a generic PLM-driven and web-based concept to support the collaborative work in the aforementioned context.

The Growth of Tense Productivity

ERIC Educational Resources Information Center

Rispoli, Matthew; Hadley, Pamela A.; Holt, Janet K.

2009-01-01

Purpose: This study tests empirical predictions of a maturational model for the growth of tense in children younger than 36 months using a type-based productivity measure. Method: Caregiver-child language samples were collected from 20 typically developing children every 3 months from 21 to 33 months of age. Growth in the productivity of tense…

Improvements in safety testing of lithium cells

NASA Astrophysics Data System (ADS)

Stinebring, R. C.; Krehl, P.

1985-07-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

Improvements in safety testing of lithium cells

NASA Technical Reports Server (NTRS)

Stinebring, R. C.; Krehl, P.

1985-01-01

A systematic approach was developed for evaluating the basic safety parameters of high power lithium soluble cathode cells. This approach consists of performing a series of tests on each cell model during the design, prototype and production phases. Abusive testing is performed in a facility where maximum protection is given to test personnel.

[Development and application of reference materials containing mixed degradation products of amoxicillin and ampicillin].

PubMed

Li, Wei; Zhang, Wei-Qing; Li, Xiang; Hu, Chang-Qin

2014-09-01

Reference materials containing mixed degradation products of amoxicillin and ampicillin were developed after optimization of preparation processes. The target impurities were obtained by controlled stress testing, and each major component was identified with HPLC-MS and compared with single traceable reference standard each. The developed reference materials were applied to system suitability test for verifying HPLC system performed in accordance with set forth in China Pharmacopeia and identification of major impurities in samples based on retention and spectra information, which have advantages over the methods put forth in foreign pharmacopoeias. The development and application of the reference materials offer an effective way for rapid identification of impurities in chromatograms, and provide references for analyzing source of impurities and evaluation of drug quality.

Forecasting in foodservice: model development, testing, and evaluation.

PubMed

Miller, J L; Thompson, P A; Orabella, M M

1991-05-01

This study was designed to develop, test, and evaluate mathematical models appropriate for forecasting menu-item production demand in foodservice. Data were collected from residence and dining hall foodservices at Ohio State University. Objectives of the study were to collect, code, and analyze the data; develop and test models using actual operation data; and compare forecasting results with current methods in use. Customer count was forecast using deseasonalized simple exponential smoothing. Menu-item demand was forecast by multiplying the count forecast by a predicted preference statistic. Forecasting models were evaluated using mean squared error, mean absolute deviation, and mean absolute percentage error techniques. All models were more accurate than current methods. A broad spectrum of forecasting techniques could be used by foodservice managers with access to a personal computer and spread-sheet and database-management software. The findings indicate that mathematical forecasting techniques may be effective in foodservice operations to control costs, increase productivity, and maximize profits.

Process analytical technology to understand the disintegration behavior of alendronate sodium tablets.

PubMed

Xu, Xiaoming; Gupta, Abhay; Sayeed, Vilayat A; Khan, Mansoor A

2013-05-01

Various adverse events including esophagus irritations have been reported with the use of alendronate tablets, likely attributed to the rapid tablet disintegration in the mouth or esophagus. Accordingly, the disintegration of six alendronate tablet drug products was studied using a newly developed testing device equipped with in-line sensors, in addition to the official compendial procedure for measuring the disintegration time. The in-line sensors were used to monitor the particle count and solution pH change to assess the onset and duration of disintegration. A relatively large variation was observed in the disintegration time of the tested drug products using the compendial method. The data collected using the in-line sensors suggested that all tested drug products exhibited almost instantaneous onset of disintegration, under 2 s, and a sharp drop in solution pH. The drop in pH was slower for tablets with slower disintegration. The in-house prepared alendronate test tablets also showed similar trends suggesting rapid solubilization of the drug contributed to the fast tablet disintegration. This research highlights the usefulness of the newly developed in-line analytical method in combination with the compendial method in providing a better understanding of the disintegration and the accompanying drug solubilization processes for fast disintegrating tablet drug products. Copyright © 2013 Wiley Periodicals, Inc.

Microfluidics for Drug Discovery and Development: From Target Selection to Product Lifecycle Management

PubMed Central

Kang, Lifeng; Chung, Bong Geun; Langer, Robert; Khademhosseini, Ali

2009-01-01

Microfluidic technologies’ ability to miniaturize assays and increase experimental throughput have generated significant interest in the drug discovery and development domain. These characteristics make microfluidic systems a potentially valuable tool for many drug discovery and development applications. Here, we review the recent advances of microfluidic devices for drug discovery and development and highlight their applications in different stages of the process, including target selection, lead identification, preclinical tests, clinical trials, chemical synthesis, formulations studies, and product management. PMID:18190858

Practical use of high-speed cameras for research and development within the automotive industry: yesterday and today

NASA Astrophysics Data System (ADS)

Steinmetz, Klaus

1995-05-01

Within the automotive industry, especially for the development and improvement of safety systems, we find a lot of high accelerated motions, that can not be followed and consequently not be analyzed by human eye. For the vehicle safety tests at AUDI, which are performed as 'Crash Tests', 'Sled Tests' and 'Static Component Tests', 'Stalex', 'Hycam', and 'Locam' cameras are in use. Nowadays the automobile production is inconceivable without the use of high speed cameras.

Elicited Production of Relative Clauses in German: Evidence from Typically Developing Children and Children with Specific Language Impairment

ERIC Educational Resources Information Center

Adani, Flavia; Stegenwallner-Schütz, Maja; Haendler, Yair; Zukowski, Andrea

2016-01-01

We elicited the production of various types of relative clauses in a group of German-speaking children with specific language impairment (SLI) and typically developing controls in order to test the movement optionality account of grammatical difficulty in SLI. The results show that German-speaking children with SLI are impaired in relative clause…

PROTOCOL FOR LABORATORY TESTING OF CRUDE-OIL BIOREMEDIATION PRODUCTS IN FRESHWATER CONDITIONS

EPA Science Inventory

In 1993, the Environmental Protection Agency, National Risk Management Research Laboratory (EPA, NRMRL), with the National Environmental Technology Application Center (NETAC), developed a protocol for evaluation of bioremediation products in marine environments. The marine proto...

SeaWiFS Technical Report Series. Volume 42; Satellite Primary Productivity Data and Algorithm Development: A Science Plan for Mission to Planet Earth

NASA Technical Reports Server (NTRS)

Falkowski, Paul G.; Behrenfeld, Michael J.; Esaias, Wayne E.; Balch, William; Campbell, Janet W.; Iverson, Richard L.; Kiefer, Dale A.; Morel, Andre; Yoder, James A.; Hooker, Stanford B. (Editor);

Data Management for Mars Exploration Rovers

NASA Technical Reports Server (NTRS)

Snyder, Joseph F.; Smyth, David E.

2004-01-01

Data Management for the Mars Exploration Rovers (MER) project is a comprehensive system addressing the needs of development, test, and operations phases of the mission. During development of flight software, including the science software, the data management system can be simulated using any POSIX file system. During testing, the on-board file system can be bit compared with files on the ground to verify proper behavior and end-to-end data flows. During mission operations, end-to-end accountability of data products is supported, from science observation concept to data products within the permanent ground repository. Automated and human-in-the-loop ground tools allow decisions regarding retransmitting, re-prioritizing, and deleting data products to be made using higher level information than is available to a protocol-stack approach such as the CCSDS File Delivery Protocol (CFDP).

Advanced Monobore Concept, Development of CFEX Self-Expanding Tubular Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeff Spray

2007-09-30

The Advanced Monobore Concept--CFEX{copyright} Self-Expanding Tubular Technology Development was a successfully executed fundamental research through field demonstration project. This final report is presented as a progression, according to basic technology development steps. For this project, the research and development steps used were: concept development, engineering analysis, manufacturing, testing, demonstration, and technology transfer. The CFEX{copyright} Technology Development--Advanced Monobore Concept Project successfully completed all of the steps for technology development, covering fundamental research, conceptual development, engineering design, advanced-level prototype construction, mechanical testing, and downhole demonstration. Within an approximately two year period, a partially defined, broad concept was evolved into a substantial newmore » technological area for drilling and production engineering applicable a variety of extractive industries--which was also successfully demonstrated in a test well. The demonstration achievement included an actual mono-diameter placement of two self-expanding tubulars. The fundamental result is that an economical and technically proficient means of casing any size of drilling or production well or borehole is indicated as feasible based on the results of the project. Highlighted major accomplishments during the project's Concept, Engineering, Manufacturing, Demonstration, and Technology Transfer phases, are given.« less

The effect of sea-water and fresh-water soaking on the quality of Eucheuma sp. syrup and pudding

NASA Astrophysics Data System (ADS)

Novianty, H.; Herandarudewi, S. M. C.

2018-04-01

Eucheuma alvarezii is one of marine commodity with great opportunities to be developed in Indonesia. This seaweed can be used as an additional material in cosmetic and pharmaceutical products or for syrup and pudding. Post-harvest technique conducted by the seaweed farmers will affects the quality of dried and processed products. The purpose of this study was to observe the effect of post harvest technique on the quality of dried seaweed and hedonic test (favorable test) of processed product (syrup and pudding). This study was conducted using descriptive method. The study compared dried, syrup, and puddings from two differents post-harvest technique, between salt and fresh-water draining products. The results showed that fresh-water draining technique obtained better quality results organoleptic test. The results showed that panelist prefered the fresh-water drained products of syrup and pudding. The hedonic scores were much higher for the fresh-water drained products in all three catagories of color, taste, and smell.

Agile Acceptance Test-Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software.

PubMed

Basit, Mujeeb A; Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

2018-04-13

Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test-driven development and automated regression testing promotes reliability. Test-driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a "safety net" for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and "living" design documentation. Rapid-cycle development or "agile" methods are being successfully applied to CDS development. The agile practice of automated test-driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as "executable requirements." We aimed to establish feasibility of acceptance test-driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory's expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test suite. We used test-driven development to construct a new CDS tool advising Emergency Department nurses to perform a swallowing assessment prior to administering oral medication to a patient with suspected stroke. Test tables specified desired behavior for (1) applicable clinical settings, (2) triggering action, (3) rule logic, (4) user interface, and (5) system actions in response to user input. Automated test suite results for the "executable requirements" are shown prior to building the CDS alert, during build, and after successful build. Automated acceptance test-driven development and continuous regression testing of CDS configuration in a commercial EHR proves feasible with open source software. Automated test-driven development offers one potential contribution to achieving high-reliability EHR configuration. Vetting acceptance tests with clinicians elicits their input on crucial configuration details early during initial CDS design and iteratively during rapid-cycle optimization. ©Mujeeb A Basit, Krystal L Baldwin, Vaishnavi Kannan, Emily L Flahaven, Cassandra J Parks, Jason M Ott, Duwayne L Willett. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 13.04.2018.

Test/QA Plan For Verification Of Anaerobic Digester For Energy Production And Pollution Prevention

EPA Science Inventory

The ETV-ESTE Program conducts third-party verification testing of commercially available technologies that improve the environmental conditions in the U.S. A stakeholder committee of buyers and users of such technologies guided the development of this test on anaerobic digesters...

Bibliography of In-House and Contract Reports. Supplement 15.

DTIC Science & Technology

1988-04-01

that approaches the aesthetic quality obtainable from experienced manual placement. )S 10 WNW oA ETL- 0428 AD-BI06 994L KNOWLEDGE-BASED VISION...Service Tests, and Production Model 1307 -TR 1953 Tests, Autofocusing Rectifier Development, Test, Preparation, Delivery, and ETL- 1307 1982 Installation of

Development of advanced magnetic resonance sensor for industrial applications. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Los Santos, A.

1997-06-01

Southwest Research Institute (SwRI) and various subcontractors, in a cooperative agreement with the DOE, have developed and tested an advanced magnetic resonance (MR) sensor for several industrial applications and made various market surveys. The original goal of the program was to develop an advanced moisture sensor to allow more precise and rapid control of drying processes so that energy and/or product would not be wasted. Over the course of the program, it was shown that energy savings were achievable but in many processes the return in investment did not justify the cost of a magnetic resonance sensor. However, in manymore » processes, particularly chemical, petrochemical, paper and others, the return in investment can be very high as to easily justify the cost of a magnetic resonance sensor. In these industries, substantial improvements in product yield, quality, and efficiency in production can cause substantial energy savings and reductions in product wastage with substantial environmental effects. The initial applications selected for this program included measurement of corn gluten at three different points and corn germ at one point in an American Maize corn processing plant. During the initial phases (I and II) of this program, SwRI developed a prototype advanced moisture sensor utilizing NMR technology capable of accurately and reliably measuring moisture in industrial applications and tested the sensor in the laboratory under conditions simulating on-line products in the corn wet milling industry. The objective of Phase III was to test the prototype sensor in the plant environment to determine robustness, reliability and long term stability. Meeting these objectives would permit extended field testing to improve the statistical database used to calibrate the sensor and subject the sensor to true variations in operating conditions encountered in the process rather than those which could only be simulated in the laboratory.« less

Development of a powered outdoor sealant fatigue test apparatus

Treesearch

Steven Lacher; R. Sam Williams; Corey Halpin; Christopher White

2005-01-01

This chapter describes a new cyclic fatigue test apparatus (CFTA) developed at the USDA Forest Service, Forest Products Laboratory. The new CFTA is computer controlled and powered by electric linear actuators. Computer control allows the CFTA to subject specimens to specific strain/time profiles or replicate input strain data in real time from thermal and/or moisture...

Space Shuttle External Tank Project status

NASA Technical Reports Server (NTRS)

Davis, R. M.

1980-01-01

The External Tank Project is reviewed with emphasis on the DDT&E and production phases and the lightweight tank development. It is noted that the DDT&E phase is progressing well with the structural and ground vibration test article programs complete, the propulsion test article program progressing well, and the component qualification and verification testing 92% complete. New tools and facilities are being brought on line to support the increased build rate for the production phase. The lightweight tank, which will provide additional payload in orbit, is progressing to schedule with first delivery in early 1982.

Cratos: A Simple Low Power Excavation and Hauling System for Lunar Oxygen Production and General Excavation Tasks

NASA Technical Reports Server (NTRS)

Caruso, John J.; Greer, Lawrence C.; John, Wentworth T.; Spina, Dan C.; Krasowski, Mike J.; Abel, Phillip B.; Prokop, Norman F.; Flatico, Joseph M.; Sacksteder, Kurt R.

2007-01-01

The development of a robust excavating and hauling system for lunar and planetary excavation is critical to the NASA mission to the Moon and Mars. Cratos was developed as a low center of gravity, small (.75m x .75m x 0.3m), low power tracked test vehicle. The vehicle was modified to excavate and haul because it demonstrated good performance capabilities in a laboratory and field testing. Tested on loose sand in the SLOPE facility, the vehicle was able to pick up, carry, and dump sand, allowing it to accomplish the standard requirements delivery of material to a lunar oxygen production site. Cratos can pick up and deliver raw material to a production plant, as well as deliver spent tailings to a disposal site. The vehicle can complete many other In-Situ Resource Utilization (ISRU) excavation chores and in conjunction with another vehicle or with additional attachments may be able to accomplish all needed ISRU tasks.

Design and development of FZU-32/B bomb fuze initiator. Final report 23 Jun 72--15 Nov 73

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miazza, J.

1974-05-01

The primary objective of this program was to develop a cost effective, production engineered FZU-24/B Bomb Fuze Initiator. The initiator is an electric generating device which, when installed in the fuze charging well of general purpose bombs, is capable of deriving energy from the airstream passing the bomb in free fall and converting the energy into electric energy suitable for powering a bomb fuze. The objective was to be accomplished by means of a production engineering effort carried through the evolution of design, fabrication, assembly, test, and evaluation. The baseline for the design was Harry Diamond Laboratories' Drawing No. 11716160.more » A quantity of 60 units was fabricated and tested, in accordance with the production engineered design. After some additional redesign to correct identified deficiencies, 220 units were fabricated. These units were subjected to environmental, wind tunnel, and flight testing and performance requirements were met. The final unit design was designated the FZU-32/B Bomb Fuze Initiator.« less

Exploring the Use of a Test Automation Framework

NASA Technical Reports Server (NTRS)

Cervantes, Alex

2009-01-01

It is known that software testers, more often than not, lack the time needed to fully test the delivered software product within the time period allotted to them. When problems in the implementation phase of a development project occur, it normally causes the software delivery date to slide. As a result, testers either need to work longer hours, or supplementary resources need to be added to the test team in order to meet aggressive test deadlines. One solution to this problem is to provide testers with a test automation framework to facilitate the development of automated test solutions.

Design, fabrication, testing, and delivery of improved beam steering devices

NASA Technical Reports Server (NTRS)

1973-01-01

The development, manufacture, and testing of an optical steerer intended for use in spaceborne optical radar systems are described. Included are design principles and design modifications made to harden the device against launch and space environments, the quality program and procedures developed to insure consistent product quality throughout the manufacturing phase, and engineering qualification model testing and evaluation. The delivered hardware design is considered conditionally qualified pending action on further recommended design modifications.

An outdoor test facility for the large-scale production of microalgae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.A.; Weissman, J.; Goebel, R.

The goal of the US Department of EnergySolar Energy Research Institute's Aquatic Species Program is to develop the technology base to produce liquid fuels from microalgae. This technology is being initially developed for the desert Southwest. As part of this program an outdoor test facility has been designed and constructed in Roswell, New Mexico. The site has a large existing infrastructure, a suitable climate, and abundant saline groundwater. This facility will be used to evaluate productivity of microalgae strains and conduct large-scale experiments to increase biomass productivity while decreasing production costs. Six 3-m/sup 2/ fiberglass raceways were constructed. Several microalgaemore » strains were screened for growth, one of which had a short-term productivity rate of greater than 50 g dry wt m/sup /minus/2/ d/sup /minus/1/. Two large-scale, 0.1-ha raceways have also been built. These are being used to evaluate the performance trade-offs between low-cost earthen liners and higher cost plastic liners. A series of hydraulic measurements is also being carried out to evaluate future improved pond designs. Future plans include a 0.5-ha pond, which will be built in approximately 2 years to test a scaled-up system. This unique facility will be available to other researchers and industry for studies on microalgae productivity. 6 refs., 9 figs., 1 tab.« less

Safety evaluations under the proposed US Safe Cosmetics and Personal Care Products Act of 2013: animal use and cost estimates.

PubMed

Knight, Jean; Rovida, Costanca

2014-01-01

The proposed Safe Cosmetics and Personal Care Products Act of 2013 calls for a new evaluation program for cosmetic ingredients in the US, with the new assessments initially dependent on expanded animal testing. This paper considers possible testing scenarios under the proposed Act and estimates the number of test animals and cost under each scenario. It focuses on the impact for the first 10 years of testing, the period of greatest impact on animals and costs. The analysis suggests the first 10 years of testing under the Act could evaluate, at most, about 50% of ingredients used in cosmetics. Testing during this period would cost about $ 1.7-$ 9 billion and 1-11.5 million animals. By test year 10, alternative, high-throughput test methods under development are expected to be available, replacing animal testing and allowing rapid evaluation of all ingredients. Given the high cost in dollars and animal lives of the first 10 years for only about half of ingredients, a better choice may be to accelerate development of high-throughput methods. This would allow evaluation of 100% of cosmetic ingredients before year 10 at lower cost and without animal testing.

Manufacturing, characterization and control of cell-based medicinal products: challenging paradigms toward commercial use.

PubMed

Salmikangas, Paula; Menezes-Ferreira, Margarida; Reischl, Ilona; Tsiftsoglou, Asterios; Kyselovic, Jan; Borg, John Joseph; Ruiz, Sol; Flory, Egbert; Trouvin, Jean-Hugues; Celis, Patrick; Ancans, Janis; Timon, Marcos; Pante, Guido; Sladowski, Dariusz; Lipnik-Stangelj, Metoda; Schneider, Christian K

2015-01-01

During the past decade, a large number of cell-based medicinal products have been tested in clinical trials for the treatment of various diseases and tissue defects. However, licensed products and those approaching marketing authorization are still few. One major area of challenge is the manufacturing and quality development of these complex products, for which significant manipulation of cells might be required. While the paradigms of quality, safety and efficacy must apply also to these innovative products, their demonstration may be demanding. Demonstration of comparability between production processes and batches may be difficult for cell-based medicinal products. Thus, the development should be built around a well-controlled manufacturing process and a qualified product to guarantee reproducible data from nonclinical and clinical studies.

EPA to Host June 21, 2018, Webinar on Strategy to Ensure Effectiveness of Hospital Disinfectants

EPA Pesticide Factsheets

EPA will host a listening session via webinar to seek stakeholders' input on the development of a risk-based product testing strategy to ensure continued effectiveness of hospital disinfectant products on June 21, 2018

MULTIPOLLUTANT METHODS - METHODS FOR OZONE AND OZONE PRECURSORS

EPA Science Inventory

This task involves the development and testing of methods for monitoring ozone and compounds associated with the atmospheric chemistry of ozone production both as precursors and reaction products. Although atmospheric gases are the primary interest, separation of gas and particl...

Design and testing of safer more effective preservatives for consumer products

USDA-ARS?s Scientific Manuscript database

A comprehensive evaluation of both safety and efficacy of alternative preservatives is crucial to the development of more sustainable composite materials, formulated products, and food packaging. By comparing the antimicrobial activity against Aspergillus brasiliensis (mold) and Pseudomonas aerugino...

Development of Level 1b Calibration and Validation Readiness, Implementation and Management Plans for GOES-R

NASA Technical Reports Server (NTRS)

Kunkee, David B.; Farley, Robert W.; Kwan, Betty P.; Hecht, James H.; Walterscheid, Richard L.; Claudepierre, Seth G.; Bishop, Rebecca L.; Gelinas, Lynette J.; Deluccia, Frank J.

2017-01-01

A complement of Readiness, Implementation and Management Plans (RIMPs) to facilitate management of post-launch product test activities for the official Geostationary Operational Environmental Satellite (GOES-R) Level 1b (L1b) products have been developed and documented. Separate plans have been created for each of the GOES-R sensors including: the Advanced Baseline Imager (ABI), the Extreme ultraviolet and X-ray Irradiance Sensors (EXIS), Geostationary Lightning Mapper (GLM), GOES-R Magnetometer (MAG), the Space Environment In-Situ Suite (SEISS), and the Solar Ultraviolet Imager (SUVI). The GOES-R program has implemented these RIMPs in order to address the full scope of CalVal activities required for a successful demonstration of GOES-R L1b data product quality throughout the three validation stages: Beta, Provisional and Full Validation. For each product maturity level, the RIMPs include specific performance criteria and required artifacts that provide evidence a given validation stage has been reached, the timing when each stage will be complete, a description of every applicable Post-Launch Product Test (PLPT), roles and responsibilities of personnel, upstream dependencies, and analysis methods and tools to be employed during validation. Instrument level Post-Launch Tests (PLTs) are also referenced and apply primarily to functional check-out of the instruments.

Recent Productivity Improvements to the National Transonic Facility

NASA Technical Reports Server (NTRS)

Popernack, Thomas G., Jr.; Sydnor, George H.

1998-01-01

Productivity gains have recently been made at the National Transonic Facility wind tunnel at NASA Langley Research Center. A team was assigned to assess and set productivity goals to achieve the desired operating cost and output of the facility. Simulations have been developed to show the sensitivity of selected process productivity improvements in critical areas to reduce overall test cycle times. The improvements consist of an expanded liquid nitrogen storage system, a new fan drive, a new tunnel vent stack heater, replacement of programmable logic controllers, an increased data communications speed, automated test sequencing, and a faster model changeout system. Where possible, quantifiable results of these improvements are presented. Results show that in most cases, improvements meet the productivity gains predicted by the simulations.

Cost Effective Prototyping

NASA Technical Reports Server (NTRS)

Wickman, Jerry L.; Kundu, Nikhil K.

1996-01-01

This laboratory exercise seeks to develop a cost effective prototype development. The exercise has the potential of linking part design, CAD, mold development, quality control, metrology, mold flow, materials testing, fixture design, automation, limited parts production and other issues as related to plastics manufacturing.

Advanced program development management software system. Software description and user's manual

NASA Technical Reports Server (NTRS)

1990-01-01

The objectives of this project were to apply emerging techniques and tools from the computer science discipline of paperless management to the activities of the Space Transportation and Exploration Office (PT01) in Marshall Space Flight Center (MSFC) Program Development, thereby enhancing the productivity of the workforce, the quality of the data products, and the collection, dissemination, and storage of information. The approach used to accomplish the objectives emphasized the utilization of finished form (off-the-shelf) software products to the greatest extent possible without impacting the performance of the end product, to pursue developments when necessary in the rapid prototyping environment to provide a mechanism for frequent feedback from the users, and to provide a full range of user support functions during the development process to promote testing of the software.

NASA/SDSU Geopositional Characterization

NASA Technical Reports Server (NTRS)

Helder, Dennis; Ross, Kenton; Helder, Dennis; Ross, Kentron

2006-01-01

The geolocational accuracy of products from the IKONOS, QuickBird, and OrbView-3 sensors was evaluated using two test sites: one developed in and around Brookings, SD, and one near Stennis Space Center, MS. Both of these relatively flat sites host over 100 ground control points surveyed to an accuracy of approximately 5 cm. They provide robust locations to test the basic geolocational accuracy of a variety of spaceborne and aircraft sensor systems. Imagery of both test sites was acquired by these three sensors in 2004 and in 2005; several products from each sensor, ranging from basic datasets through orthorectified imagery, were analyzed at Stennis Space Center and at South Dakota State University. While direct comparisons between sensors and products are difficult because of differing processing schemes, results indicate that these products tend to display stated levels of accuracy.

Semi-Automated Pulse-Echo Ultrasonic System for Inspecting Tires

DOT National Transportation Integrated Search

1977-07-01

A nondestructive tire-testing system has been developed using the pulse-echo ultrasonic technique, which offers substantial advantages over all other physical nondestructive-testing methods and shows promise of reducing the cost of production-tire in...

[Examination related to revised test method for determination of formaldehyde, regulated by the law for the control of household products containing harmful substances].

PubMed

Ikarashi, Yoshiaki; Kaniwa, Masa-aki; Tsuchiya, Toshie

2003-01-01

In Japan, the amount of formaldehyde in textile products was regulated by the low for the control of household products containing harmful substances. Formaldehyde was determined by measuring the optical density of acetylacetone derivative of formaldehyde extracted from textiles. The household products low stated that the increase in the optical density of color development of the extract from the textile products for babies or infants within 24 months after birth should not be more than 0.05. Collaborative study decided the amount of formaldehyde equivalent to the increase in absorbance described above, and the amount was 16 ppm. There are some reports that formaldehyde causes an allergic reaction even at a very low concentration, so continuous regulation for formaldehyde in the textiles was desirable using this level of amount. We developed HPLC method for the determination of formaldehyde in textile products. Formaldehyde was determined by the direct injection of acetylacetone derivative of samples into the system equipped with ODS column and UV-VIS detector (detection wavelength 413 nm) using the mixture of acetonitrile and water as mobile phase. The linearity was obtained between a peak area or height and the concentrations of formaldehyde solution in the range of 0.0625-2 micrograms/ml. The regulation level was sufficiently detected by the present HPLC method. We recommended that the HPLC test was adopted as a reexamination method for the products may violate the regulation as well as a dimedone test.

Qualitative and Semiquantitative Analysis of Doping Products Seized at the Swiss Border.

PubMed

Weber, Christina; Krug, Oliver; Kamber, Matthias; Thevis, Mario

2017-05-12

Substances developed for therapeutic use are also known to be misused by athletes as doping agents and, outside of regulated sport, for image-enhancement. This has generated a market for counterfeit doping substances. Counterfeit doping agents may be of poor pharmaceutical quality and therefore constitute health risks to consumers. This study aims to investigate the pharmaceutical quality of 1,190 doping products seized at the Swiss border. Swiss customs authorities seize incoming shipments potentially containing doping agents. Qualitative and semiquantitative analyses were performed in order to test for prohibited doping substances. The main analytical methods utilized for characterizing confiscated compounds were liquid chromatography-high resolution mass spectrometry, polyacrylamide gel electrophoresis with subsequent in-gel tryptic digestion and identification of peptidic compounds using nanoliquid chromatography-tandem mass spectrometry, and electrochemiluminescence immuno assay. For 889 (75%) of the analyzed products, the label suggested the content of anabolic agents, for 146 samples (12%) peptide hormones or growth factors, and for 113 items (9%) antiestrogens, aromatase inhibitors or other metabolic modulators. For the majority of the investigated products, the pharmaceutical quality was an unsatisfactory standard: nonapproved substances were detected and less than 20% of the products contained the claimed substance in the respective amount. A comprehensive sample of confiscated doping products was analyzed, allowing for monitoring of developments regarding the use of doping substances in Switzerland and for anticipating future trends and challenges in sports drug testing. An alarming number of tested products was of substandard pharmaceutical quality.

Messiah College Biodiesel Fuel Generation Project Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zummo, Michael M; Munson, J; Derr, A

Many obvious and significant concerns arise when considering the concept of small-scale biodiesel production. Does the fuel produced meet the stringent requirements set by the commercial biodiesel industry? Is the process safe? How are small-scale producers collecting and transporting waste vegetable oil? How is waste from the biodiesel production process handled by small-scale producers? These concerns and many others were the focus of the research preformed in the Messiah College Biodiesel Fuel Generation project over the last three years. This project was a unique research program in which undergraduate engineering students at Messiah College set out to research the feasibilitymore » of small-biodiesel production for application on a campus of approximately 3000 students. This Department of Energy (DOE) funded research program developed out of almost a decade of small-scale biodiesel research and development work performed by students at Messiah College. Over the course of the last three years the research team focused on four key areas related to small-scale biodiesel production: Quality Testing and Assurance, Process and Processor Research, Process and Processor Development, and Community Education. The objectives for the Messiah College Biodiesel Fuel Generation Project included the following: 1. Preparing a laboratory facility for the development and optimization of processors and processes, ASTM quality assurance, and performance testing of biodiesel fuels. 2. Developing scalable processor and process designs suitable for ASTM certifiable small-scale biodiesel production, with the goals of cost reduction and increased quality. 3. Conduct research into biodiesel process improvement and cost optimization using various biodiesel feedstocks and production ingredients.« less

Evaluation of a hydroquinone-free skin brightening product using in vitro inhibition of melanogenesis and clinical reduction of ultraviolet-induced hyperpigmentation.

PubMed

Makino, Elizabeth T T; Mehta, Rahul C C; Banga, Ajay; Jain, Piyush; Sigler, Monya L L; Sonti, Sujatha

2013-03-01

Skin lightening preparations are used by people all over the world for a diverse range of dermatologic indications. Hydroquinone (HQ) is the gold standard and remains the only prescription product available in the United States for the treatment of generalized facial hyperpigmentation. Irritation and the risk of exogenous ochronosis are the main adverse effects for concern. Therefore, there has been a constant search for new treatment alternatives. Understanding the molecular mechanisms involved in pigmentation has resulted in the development of a series of formulations that utilize a multimodal treatment approach. These proprietary formulas combine skin lightening agents that act via different mechanisms of action. The actives included 4-ethoxybenzaldehyde (anti-inflammatory and prostaglandin E2 suppressor), licorice extract (tyrosinase inhibitor), tetrahexyldecyl ascorbate (antioxidant), niacinamide (melanosome transport inhibitor), ethyl linoleate (tyrosinase inhibitor; enhances turnover of epidermis), hexylresorcinol (tyrosinase inhibitor), and retinol (tyrosinase transcription inhibitor; enhances turnover of epidermis). Select formulations were tested in several studies using the MelanoDerm™ Skin Model (MatTek Corporation, Ashland, MA) to assess the ability of the product to reduce melanin production and distribution. A single-center, double-blind comparison clinical study of 18 subjects was conducted to evaluate the efficacy of the product in reducing ultraviolet-induced hyperpigmentation. Test sites were irradiated with 1.0, 1.5, 2.0, and 2.5 minimal erythema doses. After 5 days, to allow for pigmentation development, the product or 4% HQ cream was applied to the respective test sites, once daily for 4 weeks. Chroma Meter measurements (L* brightness) and standardized digital photographs were taken of the test sites twice a week. The test product resulted in greater reduction in melanin as measured by melanin content and histological staining compared with the positive control in the MelanoDerm Skin Model. The product also demonstrated statistically significant reductions in pigmentation compared with baseline (all P ≤.0001) at the end of the clinical study, and produced greater increases in L*, compared with 4% HQ. Results from these studies indicate that a product designed to affect multiple pathways of melanogenesis and melanin distribution may provide an additional treatment option beyond HQ for hyperpigmentation.

Chemical Composition Analysis and Product Consistency Tests of the ORP Phase 5 Nepheline Study Glasses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K. M.; Edwards, T. B.; Caldwell, M. E.

In this report, the Savannah River National Laboratory (SRNL) provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated high-level waste glass compositions fabricated by the Pacific Northwest National Laboratory (PNNL). These data will be used in the development of improved models for the prediction of nepheline crystallization in support of the Hanford Tank Waste Treatment and Immobilization Plant (WTP).

Report on Advanced Life Support Activities at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Wheeler, Raymond M.

2004-01-01

Plant studies at Kennedy Space Center last year focused on selecting cultivars of lettuce, tomato, and pepper for further testing as crops for near-term space flight applications. Other testing continued with lettuce, onion, and radish plants grown at different combinations of light (PPF), temperature, and CO2 concentration. In addition, comparisons of mixed versus mono culture approaches for vegetable production were studied. Water processing testing focused on the development and testing of a rotating membrane bioreactor to increase oxygen diffusion levels for reducing total organic carbon levels and promoting nitrification. Other testing continued to study composting testing for food wastes (NRA grant) and the use of supplemental green light with red/blue LED lighting systems for plant production (NRC fellowship).

Study for identification of Beneficial Uses of Space (BUS). Volume 2: Technical report. Book 1: Sections 1 through 4. [with emphasis on space manufacturing and product development

NASA Technical Reports Server (NTRS)

1973-01-01

Consolidated information is presented for the study whose purpose was to identify products, processes, and services to be produced in future spacecraft environments for direct utilization on earth. Discussion of methodology for selecting from among potential space processing approaches, definition of requirements for experiments and tests needed to acquire sufficient knowledge for proof testing of selected processes, formulation of research and development schedules to achieve proof testing, and documentation of the decision processes involved in the programs are presented. Technology and programmatics are reported for the following select studies: (1) surface acoustic wave components; (2) transparent oxides; (3) high purity tungsten X-ray targets; and (4) high specificity isoenzymes.

Will dapivirine redeem the promises of anti-HIV microbicides? Overview of product design and clinical testing.

PubMed

das Neves, José; Martins, João Pedro; Sarmento, Bruno

2016-08-01

Microbicides are being developed in order to prevent sexual transmission of HIV. Dapivirine, a non-nucleoside reverse transcriptase inhibitor, is one of the leading drug candidates in the field, currently being tested in various dosage forms, namely vaginal rings, gels, and films. In particular, a ring allowing sustained drug release for 1month is in an advanced stage of clinical testing. Two parallel phase III clinical trials are underway in sub-Saharan Africa and results are expected to be released in early 2016. This article overviews the development of dapivirine and its multiple products as potential microbicides, with particular emphasis being placed on clinical evaluation. Also, critical aspects regarding regulatory approval, manufacturing, distribution, and access are discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Career Preparation in Agricultural Products (Food Processing): A Curriculum Guide for High School Vocational Agriculture. Test Edition.

ERIC Educational Resources Information Center

Moore, Eddie A.

This curriculum guide in agricultural products (food processing) is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes three occupational subgroups: meat, fish, poultry; dairy (milk) products; fruits and vegetables. It is meant as an…

The Harvard Beat Assessment Test (H-BAT): a battery for assessing beat perception and production and their dissociation.

PubMed

Fujii, Shinya; Schlaug, Gottfried

2013-01-01

Humans have the abilities to perceive, produce, and synchronize with a musical beat, yet there are widespread individual differences. To investigate these abilities and to determine if a dissociation between beat perception and production exists, we developed the Harvard Beat Assessment Test (H-BAT), a new battery that assesses beat perception and production abilities. H-BAT consists of four subtests: (1) music tapping test (MTT), (2) beat saliency test (BST), (3) beat interval test (BIT), and (4) beat finding and interval test (BFIT). MTT measures the degree of tapping synchronization with the beat of music, whereas BST, BIT, and BFIT measure perception and production thresholds via psychophysical adaptive stair-case methods. We administered the H-BAT on thirty individuals and investigated the performance distribution across these individuals in each subtest. There was a wide distribution in individual abilities to tap in synchrony with the beat of music during the MTT. The degree of synchronization consistency was negatively correlated with thresholds in the BST, BIT, and BFIT: a lower degree of synchronization was associated with higher perception and production thresholds. H-BAT can be a useful tool in determining an individual's ability to perceive and produce a beat within a single session.

The Harvard Beat Assessment Test (H-BAT): a battery for assessing beat perception and production and their dissociation

PubMed Central

Fujii, Shinya; Schlaug, Gottfried

2013-01-01

Humans have the abilities to perceive, produce, and synchronize with a musical beat, yet there are widespread individual differences. To investigate these abilities and to determine if a dissociation between beat perception and production exists, we developed the Harvard Beat Assessment Test (H-BAT), a new battery that assesses beat perception and production abilities. H-BAT consists of four subtests: (1) music tapping test (MTT), (2) beat saliency test (BST), (3) beat interval test (BIT), and (4) beat finding and interval test (BFIT). MTT measures the degree of tapping synchronization with the beat of music, whereas BST, BIT, and BFIT measure perception and production thresholds via psychophysical adaptive stair-case methods. We administered the H-BAT on thirty individuals and investigated the performance distribution across these individuals in each subtest. There was a wide distribution in individual abilities to tap in synchrony with the beat of music during the MTT. The degree of synchronization consistency was negatively correlated with thresholds in the BST, BIT, and BFIT: a lower degree of synchronization was associated with higher perception and production thresholds. H-BAT can be a useful tool in determining an individual's ability to perceive and produce a beat within a single session. PMID:24324421

Ni-MH storage test and cycle life test

NASA Technical Reports Server (NTRS)

Dell, R. Dan; Klein, Glenn C.; Schmidt, David F.

1994-01-01

Gates Aerospace Batteries is conducting two long term test programs to fully characterize the NiMH cell technology for aerospace applications. The first program analyzes the effects of long term storage upon cell performance. The second program analyzes cycle life testing and preliminary production lot testing. This paper summarizes these approaches to testing the NiMH couple and culminates with initial storage and testing recommendations. Long term storage presents challenges to deter the adverse condition of capacity fade in NiMH cells. Elevated but stabilized pressures and elevated but stabilized end-of-charge voltages also appear to be a characteristic phenomenon of long term storage modes. However, the performance degradation is dependent upon specific characteristics of the metal-hydride alloy. To date, there is no objective evidence with which to recommend the proper method for storage and handling of NiMH cells upon shipment. This is particularly critical due to limited data points that indicate open circuit storage at room temperature for 60 to 90 days will result in irrecoverable capacity loss. Accordingly a test plan was developed to determine what method of mid-term to long-term storage will prevent irrecoverable capacity loss. The explicit assumption is that trickle charging at some rate above the self-discharge rate will prevent the irreversible chemical changes to the negative electrode that result in the irrecoverable capacity loss. Another premise is that lower storage temperatures, typically 0 C for aerospace customers, will impede any negative chemical reactions. Three different trickle charge rates are expected to yield a fairly flat response with respect to recoverable capacity versus baseline cells in two different modes of open circuit. Specific attributes monitored include: end-of-charge voltage, end-of-charge pressure, mid-point discharge voltage, capacity, and end-of-discharge pressure. Cycle life testing and preliminary production lot testing continue to dominate the overall technology development effort at GAB. The cell life test program reflects continuing improvements in baseline cell designs. Performance improvements include lower and more stable charge voltages and pressures. The continuing review of production lot testing assures conformance to the design criteria and expectations. This is especially critical during this period of transferring technology from research and development status to production.

Impact of In-Service Training and Staff Development on Workers' Job Performance and Optimal Productivity in Public Secondary Schools in Osun State, Nigeria

ERIC Educational Resources Information Center

Fejoh, Johnson; Faniran, Victoria Loveth

2016-01-01

This study investigated the impact of in-service training and staff development on workers' job performance and optimal productivity in public secondary schools in Osun State, Nigeria. The study used the ex-post-facto research design. Three research questions and three hypotheses were generated and tested using questionnaire items adapted from…

L1 Use and Morphosyntactic Development in the Oral Production of EFL Learners in a CLIL Context

ERIC Educational Resources Information Center

Lazaro, Amparo; Garcia Mayo, Maria del Pilar

2012-01-01

This paper explores the effects of Content and Language Integrated Learning (CLIL) instruction on the oral production of 15 high-school learners of English. The learners' use of the L1s (Basque and Spanish) in discourse markers and repair sequences as well as the learners' overall morphosyntactic development were analysed at two testing times (age…

Results of a Follow-Up Survey of CAI Development in Selected Institutions of Higher Education.

ERIC Educational Resources Information Center

Karrer, Urs

Designed to test the premise that the production system for courseware has a strong impact on the quality of the courseware developed, a survey of 14 U.S. institutions of higher education was conducted in 1986 to investigate the production systems used by these schools. Many of the questions used and the list of institutions surveyed were…

Integration of design and inspection

NASA Astrophysics Data System (ADS)

Simmonds, William H.

1990-08-01

Developments in advanced computer integrated manufacturing technology, coupled with the emphasis on Total Quality Management, are exposing needs for new techniques to integrate all functions from design through to support of the delivered product. One critical functional area that must be integrated into design is that embracing the measurement, inspection and test activities necessary for validation of the delivered product. This area is being tackled by a collaborative project supported by the UK Government Department of Trade and Industry. The project is aimed at developing techniques for analysing validation needs and for planning validation methods. Within the project an experimental Computer Aided Validation Expert system (CAVE) is being constructed. This operates with a generalised model of the validation process and helps with all design stages: specification of product requirements; analysis of the assurance provided by a proposed design and method of manufacture; development of the inspection and test strategy; and analysis of feedback data. The kernel of the system is a knowledge base containing knowledge of the manufacturing process capabilities and of the available inspection and test facilities. The CAVE system is being integrated into a real life advanced computer integrated manufacturing facility for demonstration and evaluation.

Hybrid analysis (barcode-high resolution melting) for authentication of Thai herbal products, Andrographis paniculata (Burm.f.) Wall.ex Nees

PubMed Central

Osathanunkul, Maslin; Suwannapoom, Chatmongkon; Khamyong, Nuttaluck; Pintakum, Danupol; Lamphun, Santisuk Na; Triwitayakorn, Kanokporn; Osathanunkul, Kitisak; Madesis, Panagiotis

2016-01-01

Background: Andrographis paniculata Nees is a medicinal plant with multiple pharmacological properties. It has been used over many centuries as a household remedy. A. paniculata products sold on the markets are in processed forms so it is difficult to authenticate. Therefore buying the herbal products poses a high-risk of acquiring counterfeited, substituted and/or adulterated products. Due to these issues, a reliable method to authenticate products is needed. Materials and Methods: High resolution melting analysis coupled with DNA barcoding (Bar-HRM) was applied to detect adulteration in commercial herbal products. The rbcL barcode was selected to use in primers design for HRM analysis to produce standard melting profile of A. paniculata species. DNA of the tested commercial products was isolated and their melting profiles were then generated and compared with the standard A. paniculata. Results: The melting profiles of the rbcL amplicons of the three closely related herbal species (A. paniculata, Acanthus ebracteatus and Rhinacanthus nasutus) are clearly separated so that they can be distinguished by the developed method. The method was then used to authenticate commercial herbal products. HRM curves of all 10 samples tested are similar to A. paniculata which indicated that all tested products were contained the correct species as labeled. Conclusion: The method described in this study has been proved to be useful in aiding identification and/or authenticating A. paniculata. This Bar-HRM analysis has allowed us easily to determine the A. paniculata species in herbal products on the markets even they are in processed forms. SUMMARY We propose the use of DNA barcoding combined with High Resolution Melting analysis for authenticating of Andrographis paniculata products.The developed method can be used regardless of the type of the DNA template (fresh or dried tissue, leaf, and stem).rbcL region was chosen for the analysis and work well with our samplesWe can easily determine the A. paniculata species in herbal products tested. Abbreviations used: bp: Base pair, Tm: Melting temperature PMID:27041863

Detection of undeclared animal by-products in commercial canine canned foods: Comparative analyses by ELISA and PCR-RFLP coupled with slab gel electrophoresis or capillary gel electrophoresis.

PubMed

Hsieh, Ming-Kun; Shih, Pei-Yin; Wei, Chia-Fong; Vickroy, Thomas W; Chou, Chi-Chung

2016-03-30

The potential presence of undeclared animal by-products in pet foods is not subject to routine examination. Previously published methods for species-based identification of animal by-products have not been used routinely owing to inconsistent results. The present study evaluated the utility of several approaches for accurate identification of animal by-products in 11 commercial brands of canine canned foods. Canine canned foods from several countries were analysed by ELISA, PCR-RFLP coupled with slab-gel electrophoresis (SGE) and capillary gel electrophoresis (CGE) to test for evidence of by-products derived from cattle, chicken, sheep or pig. While CGE-based analysis detected all (24) animal-derived by-products that were reported for the 11 test samples, SGE and ELISA detected only 22/24 (92%) and 14/24 (58%) of labelled by-products, respectively. In addition, undeclared animal by-products were found using all three analytical approaches with CGE detecting more positives (19) than SGE (17) or ELISA (5). Significant disparities were evident between the labelled contents and the detected content of animal by-products. CGE-based testing for PCR products appears to provide greater sensitivity and accuracy than either SGE or ELISA-based methods. As testing of commercial products becomes more reliable and mainstream, manufacturers will need to develop more thorough and accurate labelling protocols. © 2015 Society of Chemical Industry.

Advances in neglected tropical disease vaccines: Developing relative potency and functional assays for the Na-GST-1/Alhydrogel hookworm vaccine

PubMed Central

Brelsford, Jill B.; Plieskatt, Jordan L.; Yakovleva, Anna; Jariwala, Amar; Keegan, Brian P.; Peng, Jin; Xia, Pengjun; Li, Guangzhao; Campbell, Doreen; Periago, Maria Victoria; Correa-Oliveira, Rodrigo; Bottazzi, Maria Elena; Hotez, Peter J.

2017-01-01

A new generation of vaccines for the neglected tropical diseases (NTDs) have now advanced into clinical development, with the Na-GST-1/Alhydrogel Hookworm Vaccine already being tested in Phase 1 studies in healthy adults. The current manuscript focuses on the often overlooked critical aspects of NTD vaccine product development, more specifically, vaccine stability testing programs. A key measure of vaccine stability testing is "relative potency" or the immunogenicity of the vaccine during storage. As with most NTD vaccines, the Na-GST-1/Alhydrogel Hookworm Vaccine was not developed by attenuation or inactivation of the pathogen (Necator americanus), so conventional methods for measuring relative potency are not relevant for this investigational product. Herein, we describe a novel relative potency testing program and report for the first time on the clinical lot of this NTD vaccine during its first 60 months of storage at 2–8°C. We also describe the development of a complementary functional assay that measures the ability of IgG from animals or humans immunized with Na-GST-1/Alhydrogel to neutralize this important hookworm enzyme. While 90% inhibition of the catalytic activity of Na-GST-1 was achieved in animals immunized with Na-GST-1/Alhydrogel, lower levels of inhibition were observed in immunized humans. Moreover, anti-Na-GST-1 antibodies from volunteers in non-hookworm endemic areas were better able to inhibit catalytic activity than anti-Na-GST-1 antibodies from volunteers resident in hookworm endemic areas. The results described herein provide the critical tools for the product development of NTD vaccines. PMID:28192438

A meta-heuristic approach supported by NSGA-II for the design and plan of supply chain networks considering new product development

NASA Astrophysics Data System (ADS)

Alizadeh Afrouzy, Zahra; Paydar, Mohammad Mahdi; Nasseri, Seyed Hadi; Mahdavi, Iraj

2018-03-01

There are many reasons for the growing interest in developing new product projects for any firm. The most embossed reason is surviving in a highly competitive industry which the customer tastes are changing rapidly. A well-managed supply chain network can provide the most profit for firms due to considering new product development. Along with profit, customer satisfaction and production of new products are goals which lead to a more efficient supply chain. As new products appear in the market, the old products could become obsolete, and then phased out. The most important parameter in a supply chain which considers new and developed products is the time that developed and new products are introduced and old products are phased out. With consideration of the factors noted above, this study proposes to design a tri-objective multi-echelon multi-product multi-period supply chain model, which incorporates product development and new product production and their effects on supply chain configuration. The supply chain under consideration is assumed to consist of suppliers, manufacturers, distributors and customer groups. In terms of overcoming NP-hardness of the proposed model and in order to solve the complicated problem, a non-dominated sorting genetic algorithm is employed. As there is no benchmark available in the literature, the non-dominated ranking genetic algorithm is developed to validate the results obtained and some test problems are provided to show the applicability of the proposed methodology and evaluate the performance of the algorithms.

Report Briefs: Publications of the Energy Division, Oak Ridge National Laboratory, 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moser, C.I.

The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumer Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether the products found are comparable to products priced the previous month. Prices for noncomparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklistsmore » up to date and quite often simply to develop checklists for service industry products. Some people estimate that more than 50% of U.S. economic activity is not accounted for in the CPI. The objective it to provide the results of tests on a method for helping BLS staff build new product checklists quickly and efficiently. The domain chosen for studying the method was the telecommunications industry. The method developed by ORNL is based on behavioral science and knowledge-engineering principles. The method has ten steps, which include developing a sample of domain experts, asking experts to list products in the domain, culling the list of products to a manageable number, asking experts to group the remaining products, identifying product clusters using multidimensional scaling and cluster analysis, asking experts to compare pairs of products within clusters, and, finally, developing checklists with the comparison data. The method performed as expected. Several prototype checklists for products in the telecommunications domain were developed, including checklists for paging services, digital cell phones, web browsers, routers, and LAN modems. It was particularly difficult, however, to find experts to participate in the project. Attending a professional meeting and contacting experts from the conference's mailing list proved to be the best approach for this domain. The method has performed well in two domains: the telecommunications industry, as demonstrated in this project, and the PC software industry, as demonstrated in a previous project. It is recommended that the method be further tested in additional service industries, such as the nursing home industry. In addition, further attention needs to be devoted to developing procedures for the method to improve its cost and time efficiency. For example, if automated methods were used to collect information from the experts and if the experts could be assembled at one time, it could be possible to create prototype checklists in one day.« less

The CELSS Test Facility - A foundation for crop research in space

NASA Technical Reports Server (NTRS)

Straight, C. L.; Macelroy, R. D.

1990-01-01

Under the NASA Space Biology Initiative, a CELSS Test Facility (CTF) is being planned for installation on Space Station Freedom. The CTF will be used to study the productivity of typical CELSS higher plant crops under the microgravity conditions of the Space Station Freedom (SSF). Such science studies will be supported under the CELSS Space Research Project. The CTF will be used to evaluate fundamental issues of crop productivity, such as the production rates of O2, food and transpired water, and CO2 uptake. A series of precursor tests that are essential to the development of the CTF will be flown on Space Shuttle flights. The tests will be used to validate and qualify technology concepts and to answer specific questions regarding seed germination, root/shoot orientation, water condensation and recycling, nutrient delivery, and liquid/gas phase interactions.

Pet Food Palatability Evaluation: A Review of Standard Assay Techniques and Interpretation of Results with a Primary Focus on Limitations

PubMed Central

Aldrich, Gregory C.; Koppel, Kadri

2015-01-01

Simple Summary Palatability of pet foods is typically measured using a single-bowl or a two-bowl test. While these tests give a general understanding of the liking or preference of one food over another, opportunities exist for further method development. Abstract The pet food industry continues to grow steadily as a result of new innovative products. Quality control and product development tests for pet foods are typically conducted through palatability testing with dogs and cats. Palatability is the measure of intake of a food that indicates acceptance or the measure of preference of one food over another. Pet food palatability is most commonly measured using a single-bowl or a two-bowl assay. While these tests answer some questions about the animals’ perception of the food, there are many limitations as well. This review addresses some of these limitations and indicates opportunities for future research. PMID:26479136

Juvenile Animal Testing: Assessing Need and Use in the Drug Product Label.

PubMed

Baldrick, Paul

2018-01-01

Juvenile animal testing has become an established part of drug development to support safe clinical use in the human pediatric population and for eventual drug product label use. A review of European Paediatric Investigation Plan decisions showed that from 2007 to mid-2017, 229 drugs had juvenile animal work requested, almost exclusively incorporating general toxicology study designs, in rat (57.5%), dog (8%), mouse (4.5%), monkey (4%), pig (2%), sheep (1%), rabbit (1%), hamster (0.5%), and species not specified (21.5%). A range of therapeutic areas were found, but the most common areas were infectious diseases (15%), endocrinology (13.5%), oncology (13%), neurology (11%), and cardiovascular diseases (10%). Examination of major clinical indications within these therapeutic areas showed some level of consistency in the species of choice for testing and the pediatric age that required support. Examination of juvenile animal study findings presented in product labels raises questions around how useful the data are to allow prescribing the drug to a child. It is hopeful that the new ICH S11 guideline "Nonclinical Safety Testing in Support of Development of Pediatric Medicines" currently in preparation will aid drug developers in clarifying the need for juvenile animal studies as well as in promoting a move away from toxicology studies with a conventional design. This would permit more focused testing to examine identified areas of toxicity or safety concerns and clarify the presentation/interpretation of juvenile animal study findings for proper risk assessment by a drug prescriber.

Impact of Learning Model Based on Cognitive Conflict toward Student’s Conceptual Understanding

NASA Astrophysics Data System (ADS)

Mufit, F.; Festiyed, F.; Fauzan, A.; Lufri, L.

2018-04-01

The problems that often occur in the learning of physics is a matter of misconception and low understanding of the concept. Misconceptions do not only happen to students, but also happen to college students and teachers. The existing learning model has not had much impact on improving conceptual understanding and remedial efforts of student misconception. This study aims to see the impact of cognitive-based learning model in improving conceptual understanding and remediating student misconceptions. The research method used is Design / Develop Research. The product developed is a cognitive conflict-based learning model along with its components. This article reports on product design results, validity tests, and practicality test. The study resulted in the design of cognitive conflict-based learning model with 4 learning syntaxes, namely (1) preconception activation, (2) presentation of cognitive conflict, (3) discovery of concepts & equations, (4) Reflection. The results of validity tests by some experts on aspects of content, didactic, appearance or language, indicate very valid criteria. Product trial results also show a very practical product to use. Based on pretest and posttest results, cognitive conflict-based learning models have a good impact on improving conceptual understanding and remediating misconceptions, especially in high-ability students.

Modernization of AOAC Nutrient Methods by Stakeholder Panel on Infant Formula and Adult Nutritionals.

PubMed

Sullivan, Darryl

2016-01-01

Infant formula is one of the most highly regulated products in the world. To comply with global regulations and to ensure the products are manufactured within product specifications, accurate analytical testing is required. Most of the AOAC INTERNATIONAL legacy test methods for infant formula were developed and validated in the 1980s and 1990s. Although these methods performed very well for many years, infant formulas have been updated, and today's products contain many new and novel ingredients. There were a number of cases in which the legacy AOAC methods began to result in problems with the analysis of modern infant formulas, and the use of these methods caused some disputes with regulatory agencies. In 2010, AOAC reached an agreement with the International Formula Council, which has changed its name to the Infant Nutrition Council of America, regarding a project to modernize these AOAC infant-formula test methods. This agreement led to the development of Standard Method Performance Requirements (SMPRs(®)) for 28 nutrients. After SMPR approval, methods were collected, evaluated, validated, and approved through the AOAC Official Methods(SM) process. Forty-seven methods have been approved as AOAC First Action Methods, and eight have been approved as Final Action.

Testing of viscous anti-HIV microbicides using Lactobacillus

PubMed Central

Moncla, B.J.; Pryke, K.; Rohan, L. C.; Yang, H.

2012-01-01

The development of topical microbicides for intravaginal use to prevent HIV infection requires that the drugs and formulated products be nontoxic to the endogenous vaginal Lactobacillus. In 30 min exposure tests we found dapivirine, tenofovir and UC781 (reverse transcriptase inhibitor anti-HIV drugs) as pure drugs or formulated as film or gel products were not deleterious to Lactobacillus species; however, PSC-RANTES (a synthetic CCR5 antagonist) killed 2 strains of Lactobacillus jensenii. To demonstrate the toxicity of formulated products a new assay was developed for use with viscous and non-viscous samples that we have termed the Lactobacillus toxicity test. We found that the vortex mixing of vaginal Lactobacillus species can lead to reductions in bacterial viability. Lactobacillus can survive brief, about 2 sec, but viability declines with increased vortex mixing. The addition of heat inactivated serum or bovine serum albumin, but not glycerol, prevented the decrease in bacterial viability. Bacillus atrophaeus spores also demonstrated loss of viability upon extended mixing. We observed that many of the excipients used in film formulation and the films themselves also afford protection from the killing during vortex mixing. This method is of relevance for toxicity for cidal activities of viscous products. PMID:22226641

Pilot testing of SHRP 2 reliability data and analytical products: Southern California.

DOT National Transportation Integrated Search

2015-01-01

The second Strategic Highway Research Program (SHRP 2) has been investigating the critical subject of travel time reliability for several years. As part of this research, SHRP 2 supported multiple efforts to develop products to evaluate travel time r...

40 CFR 90.902 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sale by itself or in a vehicle employed from year to year in the ordinary course of business for product development, production method assessment, and market promotion purposes. Testing exemption means an exemption granted under § 90.1004(b) for the purpose of research, investigations, studies...

BAGHOUSE FILTRATION PRODUCTS VERIFICATION TESTING, HOW IT BENEFITS THE BOILER BAGHOUSE OPERATOR

EPA Science Inventory

The paper describes the Environmental Technology Verification (ETV) Program for baghouse filtration products developed by the Air Pollution Control Technology Verification Center, one of six Centers under the ETV Program, and discusses how it benefits boiler baghouse operators. A...

An Evaluation of Ecotoxicity Test Guidelines: Their Adequacy for Nanomaterials

EPA Science Inventory

Advances in nanotechnology are resulting in the production of new nanomaterials at a rapid pace. Driving the dramatic development of new materials and products is the prospect of stronger and lighter materials, better and more efficient energy systems, potential tremendous benefi...

Carbonate fuel cells: Milliwatts to megawatts

NASA Astrophysics Data System (ADS)

Farooque, M.; Maru, H. C.

The carbonate fuel cell power plant is an emerging high efficiency, ultra-clean power generator utilizing a variety of gaseous, liquid, and solid carbonaceous fuels for commercial and industrial applications. The primary mover of this generator is a carbonate fuel cell. The fuel cell uses alkali metal carbonate mixtures as electrolyte and operates at ∼650 °C. Corrosion of the cell hardware and stability of the ceramic components have been important design considerations in the early stages of development. The material and electrolyte choices are founded on extensive fundamental research carried out around the world in the 60s and early 70s. The cell components were developed in the late 1970s and early 1980s. The present day carbonate fuel cell construction employs commonly available stainless steels. The electrodes are based on nickel and well-established manufacturing processes. Manufacturing process development, scale-up, stack tests, and pilot system tests dominated throughout the 1990s. Commercial product development efforts began in late 1990s leading to prototype field tests beginning in the current decade leading to commercial customer applications. Cost reduction has been an integral part of the product effort. Cost-competitive product designs have evolved as a result. Approximately half a dozen teams around the world are pursuing carbonate fuel cell product development. The power plant development efforts to date have mainly focused on several hundred kW (submegawatt) to megawatt-class plants. Almost 40 submegawatt units have been operating at customer sites in the US, Europe, and Asia. Several of these units are operating on renewable bio-fuels. A 1 MW unit is operating on the digester gas from a municipal wastewater treatment plant in Seattle, Washington (US). Presently, there are a total of approximately 10 MW capacity carbonate fuel cell power plants installed around the world. Carbonate fuel cell products are also being developed to operate on coal-derived gases, diesel, and other logistic fuels. Innovative carbonate fuel cell/turbine hybrid power plant designs promising record energy conversion efficiencies approaching 75% have also emerged. This paper will review the historical development of this unique technology from milliwatt-scale laboratory cells to present megawatt-scale commercial power plants.

Cost-Sensitive Radial Basis Function Neural Network Classifier for Software Defect Prediction

PubMed Central

Venkatesan, R.

2016-01-01

Effective prediction of software modules, those that are prone to defects, will enable software developers to achieve efficient allocation of resources and to concentrate on quality assurance activities. The process of software development life cycle basically includes design, analysis, implementation, testing, and release phases. Generally, software testing is a critical task in the software development process wherein it is to save time and budget by detecting defects at the earliest and deliver a product without defects to the customers. This testing phase should be carefully operated in an effective manner to release a defect-free (bug-free) software product to the customers. In order to improve the software testing process, fault prediction methods identify the software parts that are more noted to be defect-prone. This paper proposes a prediction approach based on conventional radial basis function neural network (RBFNN) and the novel adaptive dimensional biogeography based optimization (ADBBO) model. The developed ADBBO based RBFNN model is tested with five publicly available datasets from the NASA data program repository. The computed results prove the effectiveness of the proposed ADBBO-RBFNN classifier approach with respect to the considered metrics in comparison with that of the early predictors available in the literature for the same datasets. PMID:27738649

Cost-Sensitive Radial Basis Function Neural Network Classifier for Software Defect Prediction.

PubMed

Kumudha, P; Venkatesan, R

Effective prediction of software modules, those that are prone to defects, will enable software developers to achieve efficient allocation of resources and to concentrate on quality assurance activities. The process of software development life cycle basically includes design, analysis, implementation, testing, and release phases. Generally, software testing is a critical task in the software development process wherein it is to save time and budget by detecting defects at the earliest and deliver a product without defects to the customers. This testing phase should be carefully operated in an effective manner to release a defect-free (bug-free) software product to the customers. In order to improve the software testing process, fault prediction methods identify the software parts that are more noted to be defect-prone. This paper proposes a prediction approach based on conventional radial basis function neural network (RBFNN) and the novel adaptive dimensional biogeography based optimization (ADBBO) model. The developed ADBBO based RBFNN model is tested with five publicly available datasets from the NASA data program repository. The computed results prove the effectiveness of the proposed ADBBO-RBFNN classifier approach with respect to the considered metrics in comparison with that of the early predictors available in the literature for the same datasets.

Progress Made in Lunar In-Situ Resource Utilization Under NASA's Exploration Technology and Development Program

NASA Technical Reports Server (NTRS)

Sanders, Gerald B.; Larson, William E.

2012-01-01

Incorporation of In-Situ Resource Utilization (ISRU) and the production of mission critical consumables for 9 propulsion, power, and life support into mission architectures can greatly reduce the mass, cost, and risk of missions 10 leading to a sustainable and affordable approach to human exploration beyond Earth. ISRU and its products can 11 also greatly affect how other exploration systems are developed, including determining which technologies are 12 important or enabling. While the concept of lunar ISRU has existed for over 40 years, the technologies and systems 13 had not progressed much past simple laboratory proof-of-concept tests. With the release of the Vision for Space 14 Exploration in 2004 with the goal of harnessing the Moon.s resources, NASA initiated the ISRU Project in the 15 Exploration Technology Development Program (ETDP) to develop the technologies and systems needed to meet 16 this goal. In the five years of work in the ISRU Project, significant advancements and accomplishments occurred in 17 several important areas of lunar ISRU. Also, two analog field tests held in Hawaii in 2008 and 2010 demonstrated 18 all the steps in ISRU capabilities required along with the integration of ISRU products and hardware with 19 propulsion, power, and cryogenic storage systems. This paper will review the scope of the ISRU Project in the 20 ETDP, ISRU incorporation and development strategies utilized by the ISRU Project, and ISRU development and 21 test accomplishments over the five years of funded project activity.

UN TRISO Compaction in SiC for FCM Fuel Irradiations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terrani, Kurt A.; Trammell, Michael P.; Kiggans, James O.

2016-11-01

The U.S. Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is conducting research and development to elevate the technology readiness level of Fully Ceramic Microencapsulated (FCM) fuels, a candidate nuclear fuel with potentially enhanced accident tolerance due to very high fission product retention. One of the early activities in FY17 was to demonstrate production of FCM pellets with uranium nitride TRISO particles. This was carried out in preparation of the larger pellet production campaign in support of the upcoming irradiation testing of this fuel form at INL’s Advanced Test Reactor.

Making Online Products More Tangible: The Effect of Product Presentation Formats on Product Evaluations.

PubMed

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-07-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that relates different online product presentation formats to the three-dimensional concept of product tangibility. We test how the three tangibility dimensions influence perceived diagnosticity and, eventually, online purchase intentions. A between-subjects lab experiment (n = 366) was used to test the hypothesized effects of three common online product presentation formats (pictures vs. 360 spin rotation vs. virtual mirror). The results showed that out of these formats, virtual mirrors were superior in providing a sense of product tangibility, followed by the 360-spin rotation format and static pictures. Furthermore, in terms of predictive validity, two of the three tangibility dimensions significantly increased perceived diagnosticity, which, in turn, positively and strongly affected purchase intentions. Overall, our results add to previous works studying the relationships between online product presentation formats and consumer decision making. Also, they hold value for online practitioners by highlighting the potential benefits of applying technologically advanced product presentation formats such as the virtual mirror.

Model-Based Development of Automotive Electronic Climate Control Software

NASA Astrophysics Data System (ADS)

Kakade, Rupesh; Murugesan, Mohan; Perugu, Bhupal; Nair, Mohanan

With increasing complexity of software in today's products, writing and maintaining thousands of lines of code is a tedious task. Instead, an alternative methodology must be employed. Model-based development is one candidate that offers several benefits and allows engineers to focus on the domain of their expertise than writing huge codes. In this paper, we discuss the application of model-based development to the electronic climate control software of vehicles. The back-to-back testing approach is presented that ensures flawless and smooth transition from legacy designs to the model-based development. Simulink report generator to create design documents from the models is presented along with its usage to run the simulation model and capture the results into the test report. Test automation using model-based development tool that support the use of unique set of test cases for several testing levels and the test procedure that is independent of software and hardware platform is also presented.

[Testing methods for the characterization of catheter balloons and lumina].

PubMed

Werner, C; Rössler, K; Deckert, F

1995-10-01

The present paper reports on the characterization of catheter balloons and lumina on the basis of such known parameters as residual volume, compliance, burst pressure and flow rate, with the aim of developing standards, test methods and testing equipment as well as standards. These are becoming ever more important with the coming into force of the EC directive on medical products [7] and the law governing medical products in Germany [13], which requires manufacturers to specify the properties of their products. Our testing concept is based on a commercially available machine that subjects materials to alternating extension and compression forces over the long-term, to which we added a special hydraulic module. Using the multimedia technology we achieved a real time superimposition of the volume-diameter curve on the balloon. The function of the testing device and method is demonstrated on dilatation catheters. Our initial results reveal compatibility with the requirements of the 1% accuracy class. Use of this methodology for comparative testing of catheters and quality evaluation is recommended.

Forebody/Inlet of the Joint Strike Fighter Tested at Low Speeds

NASA Technical Reports Server (NTRS)

Johns, Albert L.

1998-01-01

As part of a national cooperative effort to develop a multinational fighter aircraft, a model of a Joint Strike Fighter concept was tested in several NASA Lewis Research Center wind tunnels at low speeds over a range of headwind velocities and model attitudes. This Joint Strike Fighter concept, which is scheduled to go into production in 2005, will greatly improve the range, capability, maneuverability, and survivability of fighter aircraft, and the production program could ultimately be worth $100 billion. The test program was a team effort between Lewis and Lockheed Martin Tactical Aircraft Systems. Testing was completed in September 1997, several weeks ahead of schedule, allowing Lockheed additional time to review the results and analysis data before the next test and resulting in significant cost savings for Lockheed. Several major milestones related to dynamic and steady-state data acquisition and overall model performance were reached during this model test. Results from this program will contribute to both the concept demonstration phase and the production aircraft.

Comparative evaluation of concrete bridge deck sealers.

DOT National Transportation Integrated Search

2015-08-01

The main objective of this research was to compare the performance of five bridge deck sealer products using a : synthesis of two testing methods: NCHRP Report 244 Series II tests and standards developed by the Alberta : Ministry of Transportation (B...

Fiber Optic Control System integration for advanced aircraft. Electro-optic and sensor fabrication, integration, and environmental testing for flight control systems

NASA Technical Reports Server (NTRS)

Seal, Daniel W.; Weaver, Thomas L.; Kessler, Bradley L.; Bedoya, Carlos A.; Mattes, Robert E.

1994-01-01

This report describes the design, development, and testing of passive fiber optic sensors and a multiplexing electro-optic architecture (EOA) for installation and flight test on a NASA-owned F-18 aircraft. This hardware was developed under the Fiber Optic Control Systems for Advanced Aircraft program, part of a multiyear NASA initiative to design, develop, and demonstrate through flight test 'fly-by-light' systems for application to advanced aircraft flight and propulsion control. This development included the design and production of 10 passive optical sensors and associated multiplexed EOA hardware based on wavelength division multiplexed (WDM) technology. A variety of sensor types (rotary position, linear position, temperature, and pressure) incorporating a broad range of sensor technologies (WDM analog, WDM digital, analog microbend, and fluorescent time rate of decay) were obtained from different manufacturers and functionally integrated with an independently designed EOA. The sensors were built for installation in a variety of aircraft locations, placing the sensors in a variety of harsh environments. The sensors and EOA were designed and built to have the resulting devices be as close as practical to a production system. The integrated system was delivered to NASA for flight testing on a NASA-owned F-18 aircraft. Development and integration testing of the system provided valuable information as to which sensor types were simplest to design and build for a military aircraft environment and which types were simplest to operate with a multiplexed EOA. Not all sensor types met the full range of performance and environmental requirements. EOA development problems provided information on directions to pursue in future fly-by-light flight control development programs. Lessons learned in the development of the EOA and sensor hardware are summarized.

Fiber Optic Control System integration for advanced aircraft. Electro-optic and sensor fabrication, integration, and environmental testing for flight control systems

NASA Astrophysics Data System (ADS)

Seal, Daniel W.; Weaver, Thomas L.; Kessler, Bradley L.; Bedoya, Carlos A.; Mattes, Robert E.

1994-11-01

This report describes the design, development, and testing of passive fiber optic sensors and a multiplexing electro-optic architecture (EOA) for installation and flight test on a NASA-owned F-18 aircraft. This hardware was developed under the Fiber Optic Control Systems for Advanced Aircraft program, part of a multiyear NASA initiative to design, develop, and demonstrate through flight test 'fly-by-light' systems for application to advanced aircraft flight and propulsion control. This development included the design and production of 10 passive optical sensors and associated multiplexed EOA hardware based on wavelength division multiplexed (WDM) technology. A variety of sensor types (rotary position, linear position, temperature, and pressure) incorporating a broad range of sensor technologies (WDM analog, WDM digital, analog microbend, and fluorescent time rate of decay) were obtained from different manufacturers and functionally integrated with an independently designed EOA. The sensors were built for installation in a variety of aircraft locations, placing the sensors in a variety of harsh environments. The sensors and EOA were designed and built to have the resulting devices be as close as practical to a production system. The integrated system was delivered to NASA for flight testing on a NASA-owned F-18 aircraft. Development and integration testing of the system provided valuable information as to which sensor types were simplest to design and build for a military aircraft environment and which types were simplest to operate with a multiplexed EOA. Not all sensor types met the full range of performance and environmental requirements. EOA development problems provided information on directions to pursue in future fly-by-light flight control development programs. Lessons learned in the development of the EOA and sensor hardware are summarized.

Assessment of Important Sensory Attributes of Millet Based Snacks and Biscuits.

PubMed

McSweeney, Matthew B; Duizer, Lisa M; Seetharaman, Koushik; Dan Ramdath, D

2016-05-01

There is an increasing push by consumers for new food products that can provide health benefits. To develop these products, sometimes it is necessary to look to alternative crops, 1 of which is millet. For millet to be successfully adopted by consumers, it is necessary to identify and develop product types that are acceptable to North Americans. Biscuits and extruded snacks were produced using varying amounts of refined proso millet flour (0%, 25%, 75%, and 100%). Sensory analysis was conducted on 8 products (4 types of biscuits and 4 types of extruded snack) in 2 separate tests (1 for biscuits and 1 for snacks). Preferred Attribute Elicitation (PAE), a relatively new sensory method, was used to determine attributes affecting liking of the products. Results indicated that as the amount of millet in the biscuits and extruded snacks increased, the liking of the flavor, texture and overall liking decreased. Millet contributed to a bitter taste and bitter aftertaste, and resulted in gritty and dry food products. Further work is required to refine the products tested as well as to identify further products that can be added to the diet in order to take advantage of the health benefits that millet provides. © 2016 Institute of Food Technologists®

Development of a Hazard Classification Procedure for Inprocess Propellant and Explosive Materials

DTIC Science & Technology

1980-11-01

Manual of Sensitiveness Tests," Canadian Armament Research and Development Establishment, February 1966. 8-4 Dorough, G. D., et al ., "The SUSAN Test...Materials," RAD 100.10, Final Engineering Report on Production Engineering Project PE-489 (Preliminary), AMCMS Code 4932.05.4289. 8-10 Avramic, L., et al ...Performance Tests for Energetic Materials. 8-14 Leining, R. B.. et al , "Air Launched Missile Motor Behavior," AFRPL-TR-78-54, Technical

Multiple objective optimization in reliability demonstration test

DOE PAGES

Lu, Lu; Anderson-Cook, Christine Michaela; Li, Mingyang

2016-10-01

Reliability demonstration tests are usually performed in product design or validation processes to demonstrate whether a product meets specified requirements on reliability. For binomial demonstration tests, the zero-failure test has been most commonly used due to its simplicity and use of minimum sample size to achieve an acceptable consumer’s risk level. However, this test can often result in unacceptably high risk for producers as well as a low probability of passing the test even when the product has good reliability. This paper explicitly explores the interrelationship between multiple objectives that are commonly of interest when planning a demonstration test andmore » proposes structured decision-making procedures using a Pareto front approach for selecting an optimal test plan based on simultaneously balancing multiple criteria. Different strategies are suggested for scenarios with different user priorities and graphical tools are developed to help quantify the trade-offs between choices and to facilitate informed decision making. As a result, potential impacts of some subjective user inputs on the final decision are studied to offer insights and useful guidance for general applications.« less

Recommendations regarding technical standards for follow-on biologics: comparability, similarity, interchangeability.

PubMed

Davis, Gregory C; Beals, John M; Johnson, Craig; Mayer, Mark H; Meiklejohn, Bruce I; Mitlak, Bruce H; Roth, Jody L; Towns, John K; Veenhuizen, Melissa

2009-07-01

Policy makers around the world are currently considering the creation of a regulatory pathway for follow-on biologics (FOB), which will have to account for the substantial technical challenges associated with FOB development. These challenges will likely involve more complexity than comparability assessments of process changes made by the same manufacturer. The history of industry-regulator comparability discussions helps explain why the same degree of testing and flexibility now applied to change-control within a manufacturer's own process, at this time, cannot be extrapolated to the observed and possibly unknown differences between two manufacturing processes that are independently developed by different (non-collaborating) parties. This commentary provides recommendations on the technical aspects that should be considered in the creation of an approval pathway for FOB products. In the authors' view, analytical methodology in its current state cannot alone provide full assurance that the FOB is sufficiently similar to the innovator product. Moreover, the FOB manufacturer will not have access to the extensive knowledge accumulated by the innovator manufacturer from early development through marketing. Thus, extensive clinical evaluation will likely be necessary to provide assurance that the FOB is safe and efficacious. If such testing demonstrates the FOB is safe and efficacious per existing regulatory standards, the product should receive marketing approval as a 'similar' product. Since 'similarity' is a fundamentally different determination than establishing interchangeability between the two products, an interchangeability determination must be based on additional testing and market experience to ensure patient safety. Post-marketing surveillance of the FOB should be conducted to ensure that the approved molecule has similar clinical safety and efficacy as the innovator product, prior to any consideration of interchangeability.

Development, testing, and certification of the Northrup, Inc., ML series concentrating solar collector model NSC-01-0732

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

A summary is presented of the additional development work on the existing ML Series concentrating solar collector for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the development hardware, lists deliverable end items, deals with problems encountered during fabrication and testing, and includes certification statements of performance. This report shows that the products developed are marketable and suitable for public use.

Wall and corner fire tests on selected wood products

Treesearch

H. C. Tran; M. L. Janssens

1991-01-01

As part of a fire growth program to develop and validate a compartment fire model, several bench-scale and full-scale tests were conducted. This paper reports the full-scale wall and corner test results of step 2 of this study. A room fire test following the ASTM proposed standard specifications was used for these full-scale tests. In step 1, we investigated the...

Development and Validation of New Discriminative Dissolution Method for Carvedilol Tablets

PubMed Central

Raju, V.; Murthy, K. V. R.

2011-01-01

The objective of the present study was to develop and validate a discriminative dissolution method for evaluation of carvedilol tablets. Different conditions such as type of dissolution medium, volume of dissolution medium and rotation speed of paddle were evaluated. The best in vitro dissolution profile was obtained using Apparatus II (paddle), 50 rpm, 900 ml of pH 6.8 phosphate buffer as dissolution medium. The drug release was evaluated by high-performance liquid chromatographic method. The dissolution method was validated according to current ICH and FDA guidelines using parameters such as the specificity, accuracy, precision and stability were evaluated and obtained results were within the acceptable range. The comparison of the obtained dissolution profiles of three different products were investigated using ANOVA-based, model-dependent and model-independent methods, results showed that there is significant difference between the products. The dissolution test developed and validated was adequate for its higher discriminative capacity in differentiating the release characteristics of the products tested and could be applied for development and quality control of carvedilol tablets. PMID:22923865

Development of medicine-intended isotope production technologies at Yerevan Physics Institute

NASA Astrophysics Data System (ADS)

Avetisyan, Albert; Avagyan, Robert; Kerobyan, Ivetta; Dallakyan, Ruben; Harutyunyan, Gevorg; Melkonyan, Aleksandr

2015-05-01

Accelerator-based 99mTc and 123I isotopes production technologies were created and developed at A.Alikhanyan National Science Laboratory (former Yerevan Physics Institute - YerPhI). The method involves the irradiation of natural molybdenum (for 99mTc production) and natural xenon (for 123I production) using high-intensity bremsstrahlung photons from the electron beam of the LUE50 linear electron accelerator located at the YerPhI. We have developed and tested the extraction of 99mTc and 123I from the irradiated natural MoO3 and natural Xe, respectively. The production method has been developed and shown to be successful. The current activity is devoted to creation and development of the technology of direct production 99mTc on the 100Mo as target materials using the proton beam from an IBA C18/18 cyclotron. The proton cyclotron C18/18 (producer - IBA, Belgium) was purchased and will be installed nearby AANL (YerPhI) till end 2014. The 18 MeV protons will be used to investigate accelerator-based schemes for the direct production of 99mTc. Main topics of studies will include experimental measurement of 99mTc production yield for different energies of protons, irradiation times, intensities, development of new methods of 99mTc extraction from irradiated materials, development of target preparation technology, development of target material recovery methods for multiple use and others.

Wear resistance of hydrophobic surfaces

NASA Astrophysics Data System (ADS)

Martinez, MA; Abenojar, J.; Pantoja, M.; López de Armentia, S.

2017-05-01

Nature has been an inspiration source to develop artificial hydrophobic surfaces. During the latest years the development of hydrophobic surfaces has been widely researched due to their numerous ranges of industrial applications. Industrially the use of hydrophobic surfaces is being highly demanded. This is why many companies develop hydrophobic products to repel water, in order to be used as coatings. Moreover, these coating should have the appropriated mechanical properties and wear resistance. In this work wear study of a hydrophobic coating on glass is carried out. Hydrophobic product used was Sika Crystal Dry by Sika S.A.U. (Alcobendas, Spain). This product is currently used on car windshield. To calculate wear resistance, pin-on-disk tests were carried out in dry and water conditions. The test parameters were rate, load and sliding distance, which were fixed to 60 rpm, 5 N and 1000 m respectively. A chamois was used as pin. It allows to simulate a real use. The friction coefficient and loss weight were compared to determinate coating resistance

A Web-Based Common Framework to Support the Test and Evaluation Process Any Time, Anywhere, and Anyhow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schur, Anne; Brown, James C.; Eaton, Sharon L.

Test and evaluation (T and E) is an enterprise. For any product, large or small, performance data is desired on many aspects to evaluate the product?s effectiveness for the intended users. Representing the many T and E facets without bewildering the user is challenging when there is a range of people, from the system developers to the manager of the organization, that want specific feedback. A web-based One-Stop Evaluation Center was created to meet these needs for a particular project. The evaluation center is usable at any time in the systems development lifecycle and streamlines the T and E enterprise.more » This paper discusses a common framework that unifies the T and E process with many stakeholders involved and is flexible to accommodate each stakeholders?specific evaluative processes and content. Our success has translated to many cost savings by enabling quick responses to change and a better line of communication between the users, developers, and managers.« less

Auditory Perception, Suprasegmental Speech Processing, and Vocabulary Development in Chinese Preschoolers.

PubMed

Wang, Hsiao-Lan S; Chen, I-Chen; Chiang, Chun-Han; Lai, Ying-Hui; Tsao, Yu

2016-10-01

The current study examined the associations between basic auditory perception, speech prosodic processing, and vocabulary development in Chinese kindergartners, specifically, whether early basic auditory perception may be related to linguistic prosodic processing in Chinese Mandarin vocabulary acquisition. A series of language, auditory, and linguistic prosodic tests were given to 100 preschool children who had not yet learned how to read Chinese characters. The results suggested that lexical tone sensitivity and intonation production were significantly correlated with children's general vocabulary abilities. In particular, tone awareness was associated with comprehensive language development, whereas intonation production was associated with both comprehensive and expressive language development. Regression analyses revealed that tone sensitivity accounted for 36% of the unique variance in vocabulary development, whereas intonation production accounted for 6% of the variance in vocabulary development. Moreover, auditory frequency discrimination was significantly correlated with lexical tone sensitivity, syllable duration discrimination, and intonation production in Mandarin Chinese. Also it provided significant contributions to tone sensitivity and intonation production. Auditory frequency discrimination may indirectly affect early vocabulary development through Chinese speech prosody. © The Author(s) 2016.

Drilling and Production Testing the Methane Hydrate Resource Potential Associated with the Barrow Gas Fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steve McRae; Thomas Walsh; Michael Dunn

2010-02-22

In November of 2008, the Department of Energy (DOE) and the North Slope Borough (NSB) committed funding to develop a drilling plan to test the presence of hydrates in the producing formation of at least one of the Barrow Gas Fields, and to develop a production surveillance plan to monitor the behavior of hydrates as dissociation occurs. This drilling and surveillance plan was supported by earlier studies in Phase 1 of the project, including hydrate stability zone modeling, material balance modeling, and full-field history-matched reservoir simulation, all of which support the presence of methane hydrate in association with the Barrowmore » Gas Fields. This Phase 2 of the project, conducted over the past twelve months focused on selecting an optimal location for a hydrate test well; design of a logistics, drilling, completion and testing plan; and estimating costs for the activities. As originally proposed, the project was anticipated to benefit from industry activity in northwest Alaska, with opportunities to share equipment, personnel, services and mobilization and demobilization costs with one of the then-active exploration operators. The activity level dropped off, and this benefit evaporated, although plans for drilling of development wells in the BGF's matured, offering significant synergies and cost savings over a remote stand-alone drilling project. An optimal well location was chosen at the East Barrow No.18 well pad, and a vertical pilot/monitoring well and horizontal production test/surveillance well were engineered for drilling from this location. Both wells were designed with Distributed Temperature Survey (DTS) apparatus for monitoring of the hydrate-free gas interface. Once project scope was developed, a procurement process was implemented to engage the necessary service and equipment providers, and finalize project cost estimates. Based on cost proposals from vendors, total project estimated cost is $17.88 million dollars, inclusive of design work, permitting, barging, ice road/pad construction, drilling, completion, tie-in, long-term production testing and surveillance, data analysis and technology transfer. The PRA project team and North Slope have recommended moving forward to the execution phase of this project.« less

Real-Time Simulation

NASA Technical Reports Server (NTRS)

1997-01-01

Coryphaeus Software, founded in 1989 by former NASA electronic engineer Steve Lakowske, creates real-time 3D software. Designer's Workbench, the company flagship product, is a modeling and simulation tool for the development of both static and dynamic 3D databases. Other products soon followed. Activation, specifically designed for game developers, allows developers to play and test the 3D games before they commit to a target platform. Game publishers can shorten development time and prove the "playability" of the title, maximizing their chances of introducing a smash hit. Another product, EasyT, lets users create massive, realistic representation of Earth terrains that can be viewed and traversed in real time. Finally, EasyScene software control the actions among interactive objects within a virtual world. Coryphaeus products are used on Silican Graphics workstation and supercomputers to simulate real-world performance in synthetic environments. Customers include aerospace, aviation, architectural and engineering firms, game developers, and the entertainment industry.

Nuclear pursuits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-05-01

This table lists quantities of warheads (in stockpile, peak number per year, total number built, number of known test explosions), weapon development milestones (developers of the atomic bomb and hydrogen bomb, date of first operational ICBM, first nuclear-powered naval SSN in service, first MIRVed missile deployed), and testing milestones (first fission test, type of boosted fission weapon, multistage thermonuclear test, number of months from fission bomb to multistage thermonuclear bomb, etc.), and nuclear infrastructure (assembly plants, plutonium production reactors, uranium enrichment plants, etc.). Countries included in the tally are the United States, Soviet Union, Britain, France, and China.

The General Aviation Propulsion (GAP) Program

NASA Technical Reports Server (NTRS)

2008-01-01

The General Aviation Propulsion (GAP) Program Turbine Engine Element focused on the development of an advanced small turbofan engine. Goals were good fuel consumption and thrust-to-weight ratio, and very low production cost. The resulting FJX-2 turbofan engine showed the potential to meet all of these goals. The development of the engine was carried through to proof of concept testing of a complete engine system. The proof of concept engine was ground tested at sea level and in altitude test chambers. A turboprop derivative was also sea-level tested.

Flight testing techniques for the evaluation of light aircraft stability derivatives: A review and analysis

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Summery, D. C.; Johnson, W. D.

1972-01-01

Techniques quoted in the literature for the extraction of stability derivative information from flight test records are reviewed. A recent technique developed at NASA's Langley Research Center was regarded as the most productive yet developed. Results of tests of the sensitivity of this procedure to various types of data noise and to the accuracy of the estimated values of the derivatives are reported. Computer programs for providing these initial estimates are given. The literature review also includes a discussion of flight test measuring techniques, instrumentation, and piloting techniques.

Acceptability of a novel vaginal microbicide during a safety trial among low-risk women.

PubMed

Bentley, M E; Morrow, K M; Fullem, A; Chesney, M A; Horton, S D; Rosenberg, Z; Mayer, K H

2000-01-01

The increasing recognition that women who are unable or unwilling to discuss or use condoms with their sexual partners need female-controlled methods for preventing sexually transmitted diseases (STDs), including HIV, has led to considerable focus on the development of vaginal microbicides. While many such products are being tested for safety and effectiveness, clinical trials generally overlook another key factor in a product's impact on infection rates-its acceptability to users. A Phase I clinical trial of a microbicidal gel included an assessment of the product's acceptability among 27 low-risk participants. Information on acceptability was gathered from structured interviews, participants' daily diaries and unstructured exit interviews. Participants reported only minor side effects of product use, such as itching, burning and difficulty urinating; two women developed candida infections while participating in the study. None of the side effects could be conclusively linked to use of the gel. Some women noted product discharge and messiness as drawbacks of the method, but this experience varied according to how often the women applied the gel. For example, one-third of those who used it once daily said that at least some of the time, it was too "wet or drippy," compared with two-thirds of women who inserted the gel twice a day. However, participants considered these "nuisance factors" that could be outweighed by the potential protective characteristics of the product. The majority reported that they would use the product if it were available and proven efficacious, and if they perceived that they were at risk of STD infection. Additional testing of this product is urgently needed. Furthermore, as other products approach Phase I testing, acceptability assessments should be a key component of clinical trials.

Analysis of the proposed EU regulation concerning biocide products and its opportunities for alternative approaches and a toxicology for the 21st century (t4 report).

PubMed

Ferrario, Daniele; Rabbit, Richard R

2012-01-01

On June 12, 2009, the European Commission adopted a proposal for a Regulation concerning the placement on the market and use of biocidal products, which, when it enters into force on January 1, 2013, will repeal and replace Directive 98/8/EC. The main reason for the revision of the current Directive was to promote best practices for environmental and human health protection, along with implementation of current developments in safety testing in order to create safer biocides. Moreover, the proposed Regulation aims to take into consideration the newest legislation on chemicals. This article evaluates the proposed Regulation in comparison to Directive 98/8/EC. Although the new proposal requires the sharing of vertebrate animal test data, both for product authorization and for newly developed active substances, it misses - in contrast to REACH - the opportunity to recognize the accelerating development of alternative approaches to animal testing, most recently with new momentum provided by "Toxicity Testing for the 21st Century", and to support the evolution of toxicology towards a new approach to testing. The new methods promise not only to decrease animal pain and suffering, but also to provide faster results and better prediction for human risk assessment compared to traditional methods. Unfortunately, methods mandated for human risk assessment in the proposal are still mainly based on traditional animal study extrapolation. We put forward and discuss possible alternative strategies, such as in vitro testing, integrated testing strategies, toxicokinetics, "omics", systems biology, bioinformatics, and computational modeling, all of which could be more encouraged by the proposal. Current opportunities to improve our tools for biocide risk assessment are discussed, delineating advantages, limitations, and development needs. It is suggested to open the proposed Regulation to alternative approaches that are based on human biology more than on extrapolation from animals to humans.

Evolution of Regolith Feed Systems for Lunar ISRU 02 Production Plants

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Townsend, Ivan I., III; Mantovani, James G.; Metzger, Philip T.

2010-01-01

The In-Situ Resource Utilization (ISRU) project of the NASA Constellation Program, Exploration Technology Development Program (ETDP) has been engaged in the design and testing of various Lunar ISRU O2 production plant prototypes that can extract chemically bound oxygen from the minerals in the lunar regolith. This work demands that lunar regolith (or simulants) shall be introduced into the O2 production plant from a holding bin or hopper and subsequently expelled from the ISRU O2 production plant for disposal. This sub-system is called the Regolith Feed System (RFS) which exists in a variety of configurations depending on the O2 production plant oxygen being used (e.g. Hydrogen Reduction, Carbothermal, Molten Oxide Electrolysis). Each configuration may use a different technology and in addition it is desirable to have heat recuperation from the spent hot regolith as an integral part of the RFS. This paper addresses the various RFS and heat recuperation technologies and system configurations that have been developed under the NASA ISRU project since 2007. In addition current design solutions and lessons learned from reduced gravity flight testing will be discussed.

Global developmental delay in guanidionacetate methyltransferase deficiency: differences in formal testing and clinical observation.

PubMed

Verbruggen, Krijn T; Knijff, Wilma A; Soorani-Lunsing, Roelineke J; Sijens, Paul E; Verhoeven, Nanda M; Salomons, Gajja S; Goorhuis-Brouwer, Siena M; van Spronsen, Francjan J

2007-09-01

Guanidinoacetate N-methyltransferase (GAMT) deficiency is a defect in the biosynthesis of creatine (Cr). So far, reports have not focused on the description of developmental abilities in this disorder. Here, we present the result of formal testing of developmental abilities in a GAMT-deficient patient. Our patient, a 3-year-old boy with GAMT deficiency, presented clinically with a severe language production delay and nearly normal nonverbal development. Treatment with oral Cr supplementation led to partial restoration of the cerebral Cr concentration and a clinically remarkable acceleration of language production development. In contrast to clinical observation, formal testing showed a rather harmonic developmental delay before therapy and a general improvement, but no specific acceleration of language development after therapy. From our case, we conclude that in GAMT deficiency language delay is not always more prominent than delays in other developmental areas. The discrepancy between the clinical impression and formal testing underscores the importance of applying standardized tests in children with developmental delays. Screening for Cr deficiency by metabolite analysis of body fluids or proton magnetic resonance spectroscopy of the brain deficiency should be considered in any child with global developmental delay/mental retardation lacking clues for an alternative etiology.

Field analysis for explosives: TNT and RDX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elcoate, W.; Mapes, J.

The EPA has listed as hazardous many of the compounds used in the production of ammunitions and other explosive ordnance. The contamination of soil with TNT (2,4,6-trinitrotoluene), the major component of many munitions formulations and to a lesser degree RDX (hexhydro-1,3,5-trinitro-1,3,5-trizine) is a significant problem at many ammunition manufacturing facilities, depots, and ordnance disposal sites. Field test kits for explosives TNT and RDX (hexhydro-1,3,5-trinitro-1,3,5-triazine) were developed based on the methods of T.F. Jenkins and M.E. Walsh and T.F Jenkins. EnSys Environmental Products, Inc. with technical support from T.F. Jenkins took the original TNT procedure, modified it for easier field use,more » performed validation studies to ensure that it met or exceeded the method specifications for both the T.F. Jenkins and SW-846 methods, and developed an easy to use test format for the field testing of TNT. The RDX procedure has gone through the development cycle and is presently in the field validation phase. This paper describes the test protocol and performance characteristics of the TNT test procedure.« less

Development of blood transfusion product pathogen reduction treatments: a review of methods, current applications and demands.

PubMed

Salunkhe, Vishal; van der Meer, Pieter F; de Korte, Dirk; Seghatchian, Jerard; Gutiérrez, Laura

2015-02-01

Transfusion-transmitted infections (TTI) have been greatly reduced in numbers due to the strict donor selection and screening procedures, i.e. the availability of technologies to test donors for endemic infections, and routine vigilance of regulatory authorities in every step of the blood supply chain (collection, processing and storage). However, safety improvement is still a matter of concern because infection zero-risk in transfusion medicine is non-existent. Alternatives are required to assure the safety of the transfusion product and to provide a substitution to systematic blood screening tests, especially in less-developed countries or at the war-field. Furthermore, the increasing mobility of the population due to traveling poses a new challenge in the endemic screening tests routinely used, because non-endemic pathogens might emerge in a specific population. Pathogen reduction treatments sum a plethora of active approaches to eliminate or reduce potential threatening pathogen load from blood transfusion products. Despite the success of pathogen reduction treatments applied to plasma products, there is still a long way to develop and deploy pathogen reduction treatments to cellular transfusion products (such as platelets, RBCs or even to whole blood) and there is divergence on its acceptance worldwide. While the use of pathogen reduction treatments in platelets is performed routinely in a fair number of European blood banks, most of these treatments are not (or just) licensed in the USA or elsewhere in the world. The development of pathogen reduction treatments for RBC and whole blood is still in its infancy and under clinical trials. In this review, we discuss the available and emerging pathogen reduction treatments and their advantages and disadvantages. Furthermore, we highlight the importance of characterizing standard transfusion products with current and emerging approaches (OMICS) and clinical outcome, and integrating this information on a database, thinking on the benefits it might bring in the future toward personalized transfusion therapies. Copyright © 2014 Elsevier Ltd. All rights reserved.

In vivo procedures for assessment of hair greasiness.

PubMed

Knott, C A; Daykin, K; Ryan, J

1983-06-01

Synopsis Greasy hair is a common problem in Europe. The first step in developing anti-grease hair products must be to establish a sensitive protocol for measuring any changes in perceived hair greasiness. Sensitive clinical trials and in vivo evaluation methods of determining hair greasiness have been developed that show significant differences in the perceived hair greasiness following the use of different shampoos. Products tested in two clinical trials for efficacy as anti-grease shampoos were an anti-grease shampoo containing 2% 3,4-thiolanediol as the active ingredient, and a baby shampoo based on mild surfactants. The same placebo shampoo based on ether sulphates used in typical European shampoo formulations was used in both tests. A shampoo containing 2% zinc pyrithione was included in the trials as a control, since there were indications that this would increase the amount of hair greasiness. Neither of the test products were shown to be effective anti-grease shampoos. The shampoo containing 2% zinc pyrithione was shown to produce significantly more greasiness than both the placebo and the test shampoos. Since significant differences could be shown between the different shampoos, the protocol and in vivo evaluation techniques used in these clinical trials are considered to be validated.

The Effectiveness of Guided Inquiry-based Learning Material on Students’ Science Literacy Skills

NASA Astrophysics Data System (ADS)

Aulia, E. V.; Poedjiastoeti, S.; Agustini, R.

2018-01-01

The purpose of this research is to describe the effectiveness of guided inquiry-based learning material to improve students’ science literacy skills on solubility and solubility product concepts. This study used Research and Development (R&D) design and was implemented to the 11th graders of Muhammadiyah 4 Senior High School Surabaya in 2016/2017 academic year with one group pre-test and post-test design. The data collection techniques used were validation, observation, test, and questionnaire. The results of this research showed that the students’ science literacy skills are different after implementation of guided inquiry-based learning material. The guided inquiry-based learning material is effective to improve students’ science literacy skills on solubility and solubility product concepts by getting N-gain score with medium and high category. This improvement caused by the developed learning material such as lesson plan, student worksheet, and science literacy skill tests were categorized as valid and very valid. In addition, each of the learning phases in lesson plan has been well implemented. Therefore, it can be concluded that the guided inquiry-based learning material are effective to improve students’ science literacy skills on solubility and solubility product concepts in senior high school.

E-learning platform for automated testing of electronic circuits using signature analysis method

NASA Astrophysics Data System (ADS)

Gherghina, Cǎtǎlina; Bacivarov, Angelica; Bacivarov, Ioan C.; Petricǎ, Gabriel

2016-12-01

Dependability of electronic circuits can be ensured only through testing of circuit modules. This is done by generating test vectors and their application to the circuit. Testability should be viewed as a concerted effort to ensure maximum efficiency throughout the product life cycle, from conception and design stage, through production to repairs during products operating. In this paper, is presented the platform developed by authors for training for testability in electronics, in general and in using signature analysis method, in particular. The platform allows highlighting the two approaches in the field namely analog and digital signature of circuits. As a part of this e-learning platform, it has been developed a database for signatures of different electronic components meant to put into the spotlight different techniques implying fault detection, and from this there were also self-repairing techniques of the systems with this kind of components. An approach for realizing self-testing circuits based on MATLAB environment and using signature analysis method is proposed. This paper analyses the benefits of signature analysis method and simulates signature analyzer performance based on the use of pseudo-random sequences, too.

Clinical evaluation of the Novacor totally implantable ventricular assist system. Current status.

PubMed

Daniel, M A; Lee, J; LaForge, D H; Chen, H; Billich, J; Miller, P J; Ramasamy, N; Strauss, L R; Jassawalla, J S; Portner, P M

1991-01-01

The totally implantable Novacor left ventricular assist system (LVAS) is currently approaching clinical evaluation. In vivo testing and production are underway with National Institutes of Health (NIH) support. Activity over the past year has focused on manufacturing engineering, preproduction quality assurance, and in vivo experiment completion. Subsequent to successful completion of the NIH-sponsored, 2-year preclinical device readiness test (DRT), a number of refinements were identified and approved by the NIH technical/data review board. Most of these were necessitated by obsolescence or unavailability of electronic components and the decision to use only high reliability military (MIL) qualified electronic components and processes. A few additional refinements were identified to increase design margins, all of which were qualified by accelerated testing. The development of production processes, automated test programs, and MIL compliant environmental stress screening procedures was completed. Production of LVAS subsystems, including core electronic components (hybrids, application-specific integrated circuits, and surface mount boards), was initiated. Animal studies are underway. The clinical trial, at Presbyterian-University Hospital of Pittsburgh and St. Louis University Medical Center, awaits completion of in vivo experiments, protocol development, and Food and Drug Administration approval.

Investigating the Impact of Drug Crystallinity in Amorphous Tacrolimus Capsules on Pharmacokinetics and Bioequivalence Using Discriminatory In Vitro Dissolution Testing and Physiologically Based Pharmacokinetic Modeling and Simulation.

PubMed

Purohit, Hitesh S; Trasi, Niraj S; Sun, Dajun D; Chow, Edwin C Y; Wen, Hong; Zhang, Xinyuan; Gao, Yi; Taylor, Lynne S

2018-05-01

Delivering a drug in amorphous form in a formulated product is a strategy used to enhance the apparent solubility of a drug substance and its oral bioavailability. Drug crystallization in such products may occur during the manufacturing process or on storage, reducing the solubility advantage of the amorphous drug. However, the impact of partial drug crystallization in the drug product on the resulting bioavailability and pharmacokinetics is unknown. In this study, dissolution testing of commercial tacrolimus capsules (which are formulated to contain amorphous drug), both fresh and those containing different amounts of crystalline drug, was conducted using both United States Pharmacopeia and noncompendial dissolution tests with different dissolution media and volumes. A physiologically based pharmacokinetic (PBPK) absorption model was developed to predict the impact of crystallinity extent on the oral absorption of the products and to evaluate the discriminatory ability of the different dissolution methods. Virtual bioequivalence simulations between partially crystallized tacrolimus capsules versus fresh Prograf or generic tacrolimus capsules were performed using the PBPK model and in vitro dissolution data of the various fresh and partially crystallized capsules under United States Pharmacopeia and noncompendial dissolution conditions. The results suggest that compendial dissolution tests may not be sufficiently discriminatory with respect to the presence of crystallinity in an amorphous formulation. Nonsink dissolution tests using lower dissolution volumes generate more discriminatory profiles that predict different pharmacokinetics of tacrolimus capsules containing different extents of drug crystallinity. In conclusion, the PBPK modeling approach can be used to assess the impact of partial drug crystallinity in the formulated product and to guide the development of appropriate dissolution methods. Copyright © 2018 American Pharmacists Association®. All rights reserved.

Regulatory considerations for pluripotent stem cell therapies.

PubMed

Carpenter, Melissa K

2017-01-01

The development of pluripotent stem cell (PSC) therapies is rapidly advancing, and a number of PSC-derived cell products are currently being tested in clinical trials. The biological complexity of these therapies results in specific challenges in complying with regulatory guidelines. This includes the choice of starting material, reproducible and consistent manufacturing, and preclinical safety and efficacy assessment of the PSC-derived product. This review discusses current US cell therapy regulations and strategies for compliance with these regulations when developing PSC-derived products. © 2017 Elsevier B.V. All rights reserved.

Phytohormone supplementation significantly increases growth of Chlamydomonas reinhardtii cultivated for biodiesel production.

PubMed

Park, Won-Kun; Yoo, Gursong; Moon, Myounghoon; Kim, Chul Woong; Choi, Yoon-E; Yang, Ji-Won

2013-11-01

Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris-acetate-phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.

NASA Glenn Research Center Support of the ASRG Project

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Wong, Wayne A.

2014-01-01

A high efficiency radioisotope power system is being developed for long-duration NASA space science missions. The U.S. Department of Energy (DOE) managed a flight contract with Lockheed Martin Space Systems Company (LMSSC) to build Advanced Stirling Radioisotope Generators (ASRGs), with support from NASA Glenn Research Center (GRC). Sunpower Inc. held two parallel contracts to produce Advanced Stirling Convertors (ASCs), one with DOELockheed Martin to produce ASC-F flight units, and one with GRC for the production of ASC-E3 engineering unit pathfinders that are built to the flight design. In support of those contracts, GRC provided testing, materials expertise, government furnished equipment, inspections, and related data products to DOELockheed Martin and Sunpower. The technical support includes material evaluations, component tests, convertor characterization, and technology transfer. Material evaluations and component tests have been performed on various ASC components in order to assess potential life-limiting mechanisms and provide data for reliability models. Convertor level tests have been used to characterize performance under operating conditions that are representative of various mission conditions. Technology transfers enhanced contractor capabilities for specialized production processes and tests. Despite termination of flight ASRG contract, NASA continues to develop the high efficiency ASC conversion technology under the ASC-E3 contract. This paper describes key government furnished services performed for ASRG and future tests used to provide data for ongoing reliability assessments.

Development and testing of synthetic riprap constructed from coal combustion products (CCPs).

DOT National Transportation Integrated Search

2014-07-01

Even with an increase in the amount of coal combustion products (CCPs) used in concrete con-struction, soil stabilization, and other : applications, the coal power industry must dispose of a sig-nificant amount of fly ash and bottom ash. One potentia...

40 CFR 89.902 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... piece of equipment employed from year to year in the ordinary course of business for product development, production method assessment, and market promotion purposes. Testing exemption means an exemption which may be granted under § 89.1004(b) for the purpose of research investigations, studies, demonstrations or...

National Geospatial-Intelligence Agency (NGA) Calibration Target Placements during HI-SCALE (Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems)

DOE Data Explorer

Kalukin, Andrew; Endo, Satashi

2016-08-30

Test the feasibility of incorporating atmospheric models to improve simulation algorithms of image collection, developed at NGA. Various calibration objects will be used to compare simulated image products with real image products.

ENVIRONMENTAL TECHNOLOGY VERIFICATION: DEVELOPMENT OF A PROTOCOL FOR TESTING COMMERCIALLY PRODUCED STORMWATER TREATMENT DEVICES

EPA Science Inventory

Over the past decade, there has been an increasing array of commercially available products for the treatment of nonpoint source pollution from urban stormwater. These products incorporate various approaches to stormwater treatment such as: in-line subsurface treatment chambers...

Development of field performance evaluation tools and program for pavement marking materials : technical report

DOT National Transportation Integrated Search

2011-03-01

Historically the prequalification or selection of pavement marking materials (PMMs) is mainly based on : product specifications and lab testing, which do not correlate well with the field performance of the products. : On the other hand, there is no ...

A Project to Map and Monitor Baldcypress Forests in Coastal Louisiana, Using Landsat, MODIS, and ASTER Satellite Data

NASA Technical Reports Server (NTRS)

Spruce, Joseph; Sader, Steven; Smoot, James

2012-01-01

Cypress swamp forests of Louisiana offer many important ecological and economic benefits: wildlife habitat, forest products, storm buffers, water quality, and recreation. Such forests are also threatened by multiple factors: subsidence, salt water intrusion, sea level rise, persistent flooding, hydrologic modification, hurricanes, insect and nutria damage, timber harvesting, and land use conversion. Unfortunately, there are many information gaps regarding the type, location, extent, and condition of these forests. Better more up to date swamp forest mapping products are needed to aid coastal forest conservation and restoration work (e.g., through the Coastal Forest Conservation Initiative or CFCI). In response, a collaborative project was initiated to develop, test and demonstrate cypress swamp forest mapping products, using NASA supported Landsat, ASTER, and MODIS satellite data. Research Objectives are: Develop, test, and demonstrate use of Landsat and ASTER data for computing new cypress forest classification products and Landsat, ASTER, and MODIS satellite data for detecting and monitoring swamp forest change

EMI Standards for Wireless Voice and Data on Board Aircraft

NASA Technical Reports Server (NTRS)

Ely, Jay J.; Nguyen, Truong X.

2002-01-01

The use of portable electronic devices (PEDs) on board aircraft continues to be an increasing source of misunderstanding between passengers and flight-crews, and consequently, an issue of controversy between wireless product manufacturers and air transport regulatory authorities. This conflict arises primarily because of the vastly different regulatory objectives between commercial product and airborne equipment standards for avoiding electromagnetic interference (EMI). This paper summarizes international regulatory limits and test processes for measuring spurious radiated emissions from commercially available PEDs, and compares them to international standards for airborne equipment. The goal is to provide insight for wireless product developers desiring to extend the freedom of their customers to use wireless products on-board aircraft, and to identify future product characteristics, test methods and technologies that may facilitate improved wireless freedom for airline passengers.

Development of automated electromagnetic compatibility test facilities at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Harrison, Cecil A.

1986-01-01

The efforts to automate the electromagentic compatibility (EMC) test facilites at Marshall Flight Center were examined. A battery of nine standard tests is to be integrated by means of a desktop computer-controller in order to provide near real-time data assessment, store the data acquired during testing on flexible disk, and provide computer production of the certification report.

Evaluation of SAGE Electrochromic Devices: Cooperative Research and Development Final Report, CRADA Number CRD-15-579

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tenent, Robert C.

2017-12-06

NREL will conduct durability testing of Sage Electrochromics dynamic windows products using American Society for Testing and Materials (ASTM) standard methods and drive parameters as defined by Sage. Window units will be tested and standard analysis performed. Data will be summarized and reported back to Sage at the end of the testing period.

Assessing and Evaluating Department of Defense Efforts to Inform, Influence, and Persuade: Handbook for Practitioners

DTIC Science & Technology

2015-01-01

Near term (weeks) Local researchers or in-house Focus groups Develop messages and test products Validate and interpret quantitative results Medium... Testing the Survey Design : Best Practices in Survey Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Pretesting ...be presented and tested in other focus groups , with feedback contributing to revisions. Formative research could include limited pilot testing of

STAR Algorithm Integration Team - Facilitating operational algorithm development

NASA Astrophysics Data System (ADS)

Mikles, V. J.

2015-12-01

The NOAA/NESDIS Center for Satellite Research and Applications (STAR) provides technical support of the Joint Polar Satellite System (JPSS) algorithm development and integration tasks. Utilizing data from the S-NPP satellite, JPSS generates over thirty Environmental Data Records (EDRs) and Intermediate Products (IPs) spanning atmospheric, ocean, cryosphere, and land weather disciplines. The Algorithm Integration Team (AIT) brings technical expertise and support to product algorithms, specifically in testing and validating science algorithms in a pre-operational environment. The AIT verifies that new and updated algorithms function in the development environment, enforces established software development standards, and ensures that delivered packages are functional and complete. AIT facilitates the development of new JPSS-1 algorithms by implementing a review approach based on the Enterprise Product Lifecycle (EPL) process. Building on relationships established during the S-NPP algorithm development process and coordinating directly with science algorithm developers, the AIT has implemented structured reviews with self-contained document suites. The process has supported algorithm improvements for products such as ozone, active fire, vegetation index, and temperature and moisture profiles.

Developing and commercializing sustainable new wood products : a process for identifying viable products.

Treesearch

Gordon A. Enk; Stuart L. Hart

2003-01-01

A process was designed to evaluate the sustainability and potential marketability of USDA Forest Service patented technologies. The process was designed and tested jointly by the University of North Carolina, the University of Michigan, Partners for Strategic Change, and the USDA Forest Service. Two technologies were evaluated: a fiber-based product and a wood fiber/...

Low cost solar array project production process and equipment task. A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Technical readiness for the production of photovoltaic modules using single crystal silicon dendritic web sheet material is demonstrated by: (1) selection, design and implementation of solar cell and photovoltaic module process sequence in a Module Experimental Process System Development Unit; (2) demonstration runs; (3) passing of acceptance and qualification tests; and (4) achievement of a cost effective module.

An integrated production-inventory model for food products adopting a general raw material procurement policy

NASA Astrophysics Data System (ADS)

Fauza, G.; Prasetyo, H.; Amanto, B. S.

2018-05-01

Studies on an integrated production-inventory model for deteriorating items have been done extensively. Most of the studies define deterioration as physical depletion of some inventories over time. This definition may not represent the deterioration characteristics of food products. The quality of food production decreases over time while the quantity remains the same. Further, in the existing models, the raw material is replenished several times (or at least once) within one production cycle. In food industries, however, a food company, for several reasons (e.g., the seasonal raw materials, discounted price, etc.) sometimes will get more benefit if it orders raw materials in a large quantity. Considering this fact, this research, therefore, is aimed at developing a more representative inventory model by (i) considering the quality losses in food and (ii) adopting a general raw material procurement policy. A mathematical model is established to represent the proposed policy in which the total profit of the system is the objective function. To evaluate the performance of the model, a numerical test was conducted. The numerical test indicates that the developed model has better performance, i.e., the total profit is 2.3% higher compared to the existing model.

Developing an in vitro understanding of patient experience with hydrofluoroalkane-metered dose inhalers.

PubMed

Doub, William H; Shah, Vibhakar; Limb, Susan; Guo, Changning; Liu, Xiaofei; Ngo, Diem

2014-11-01

As a result of the Montreal Protocol on Substances that Deplete the Ozone Layer, manufacturers of metered dose inhalers began reformulating their products to use hydrofluoroalkanes (HFAs) as propellants in place of chlorofluorocarbons (CFCs). Although the new products are considered safe and efficacious by the US Food and Drug Administration (FDA), a large number of complaints have been registered via the FDA's Adverse Events Reporting System (FAERS)-more than 7000 as of May 2013. To develop a better understanding of the measurable parameters that may, in part, determine in vitro performance and thus patient compliance, we compared several CFC- and HFA-based products with respect to their aerodynamic performance in response to changes in actuator cleaning interval and interactuation delay interval. Comparison metrics examined in this study were: total drug delivered ex-actuator, fine particle dose (<5 μm), mass median aerodynamic diameter, plume width, plume temperature, plume impaction force, and actuator orifice diameter. Overall, no single metric or test condition distinguishes HFA products from CFC products, but, for individual products tested, there were a combination of metrics that differentiated one from another. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Quality control in the development of coagulation factor concentrates.

PubMed

Snape, T J

1987-01-01

Limitation of process change is a major factor contributing to assurance of quality in pharmaceutical manufacturing. This is particularly true in the manufacture of coagulation factor concentrates, for which presumptive testing for poorly defined product characteristics is an integral feature of finished product quality control. The development of new or modified preparations requires that this comfortable position be abandoned, and that the effect on finished product characteristics of changes to individual process steps (and components) be assessed. The degree of confidence in the safety and efficacy of the new product will be determined by, amongst other things, the complexity of the process alteration and the extent to which the results of finished product tests can be considered predictive. The introduction of a heat-treatment step for inactivation of potential viral contaminants in coagulation factor concentrates presents a significant challenge in both respects, quite independent of any consideration of assessment of the effectiveness of the viral inactivation step. These interactions are illustrated by some of the problems encountered with terminal dry heat-treatment (72 h. at 80 degrees C) of factor VIII and prothrombin complex concentrates manufactured by the Blood Products Laboratory.

A United States regulator's perspective on the ongoing chlorofluorocarbon transition.

PubMed

Meyer, R J

1999-12-01

The Food and Drug Administration (FDA) put in place a general ban on the use of chlorofluorocarbons for the products it regulates (medical devices, drugs, and foods) in 1978, exempting those products where chlorofluorocarbon use was determined to be essential for the public health. In the intervening years, as the international commitment to a full transition away from all chlorofluorocarbon use took shape under the Montreal Protocol, the FDA has worked with industry to facilitate the development and testing of alternative technologies and products for inhalation drug products. As these alternative products begin to move from testing through the approval process and into marketing, the FDA is working collaboratively with the Environmental Protection Agency, other governmental agencies, and nongovernmental stakeholders to develop a transition policy for the United States. The transition policy for metered dose inhalers must be one that achieves the dual aims of first protecting the patients who rely on these vital medical products, while also achieving the public health need of protecting the ozone layer. As a part of developing such a transition strategy, the FDA published an advance notice of proposed rulemaking (ANPRM) in March 1997. The ANPRM proposed mechanisms by which the FDA could determine when chlorofluorocarbon use in a drug product could no longer be considered essential. The ANPRM resulted in a large amount of valuable public debate and input. The FDA is now working to incorporate the knowledge gained from these public comments as it continues the rule-making process.

The development and standardization of testing methods for genetically modified organisms and their derived products.

PubMed

Zhang, Dabing; Guo, Jinchao

2011-07-01

As the worldwide commercialization of genetically modified organisms (GMOs) increases and consumers concern the safety of GMOs, many countries and regions are issuing labeling regulations on GMOs and their products. Analytical methods and their standardization for GM ingredients in foods and feed are essential for the implementation of labeling regulations. To date, the GMO testing methods are mainly based on the inserted DNA sequences and newly produced proteins in GMOs. This paper presents an overview of GMO testing methods as well as their standardization. © 2011 Institute of Botany, Chinese Academy of Sciences.

Update on lifetime tests results and analysis carried out on Thales Cryogenics integral coolers (RM family)

NASA Astrophysics Data System (ADS)

Cauquil, Jean-Marc; Martin, Jean-Yves; Bruins, Peter; Benschop, A. A. J.

2003-01-01

The life time tests realised on the serial production of Rotary Mmonoblock RM2 coolers show a measured MTTF of 4900 hours. The conventional test profile applied to these coolers is representative of operation in typical application. The duration of such life time tests is very long. The results of a design change and its impact on MTTF are available only several months after the assembly of the prototypes. We decided to develop a test method in order to reduce the duration of these life time tests. The principle is to define a test protocol easy to implement, more severe than typical application profile in order to accelerate life time tests. The accelerated test profile was defined and tested successfully. This new technique allows us to reduce life time tests costs and duration and thus the costs involved. As a consequence, we decided to have a screening of our production with this accelerated test. This allows us to master continuously the quality of our serial products and to collect additional data. This paper presents the results of life time tests performed on RM2 coolers according to the conventional and accelerated test profiles as well as the first results on the new RM2 design which show a calculated MTTF of 10000 hours.

A tutorial for developing a topical cream formulation based on the Quality by Design approach.

PubMed

Simões, Ana; Veiga, Francisco; Vitorino, Carla; Figueiras, Ana

2018-06-20

The pharmaceutical industry has entered in a new era, as there is a growing interest in increasing the quality standards of dosage forms, through the implementation of more structured development and manufacturing approaches. For many decades, the manufacturing of drug products was controlled by a regulatory framework to guarantee the quality of the final product through a fixed process and exhaustive testing. Limitations related to the Quality by Test (QbT) system have been widely acknowledged. The emergence of Quality by Design (QbD) as a systematic and risk-based approach introduced a new quality concept based on a good understanding of how raw materials and process parameters influence the final quality profile. Although the QbD system has been recognized as a revolutionary approach to product development and manufacturing, its full implementation in the pharmaceutical field is still limited. This is particularly evident in the case of semisolid complex formulation development. The present review aims at establishing a practical QbD framework to describe all stages comprised in the pharmaceutical development of a conventional cream in a comprehensible manner. Copyright © 2018. Published by Elsevier Inc.

Analysis of the quality of image data acquired by the LANDSAT-4 Thematic Mapper and Multispectral Scanners

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator)

1984-01-01

The geometric quality of TM film and digital products is evaluated by making selective photomeasurements and by measuring the coordinates of known features on both the TM products and map products. These paired observations are related using a standard linear least squares regression approach. Using regression equations and coefficients developed from 225 (TM film product) and 20 (TM digital product) control points, map coordinates of test points are predicted. The residual error vectors and analysis of variance (ANOVA) were performed on the east and north residual using nine image segments (blocks) as treatments. Based on the root mean square error of the 223 (TM film product) and 22 (TM digital product) test points, users of TM data expect the planimetric accuracy of mapped points to be within 91 meters and within 117 meters for the film products, and to be within 12 meters and within 14 meters for the digital products.

Agile Acceptance Test–Driven Development of Clinical Decision Support Advisories: Feasibility of Using Open Source Software

PubMed Central

Baldwin, Krystal L; Kannan, Vaishnavi; Flahaven, Emily L; Parks, Cassandra J; Ott, Jason M; Willett, Duwayne L

2018-01-01

Background Moving to electronic health records (EHRs) confers substantial benefits but risks unintended consequences. Modern EHRs consist of complex software code with extensive local configurability options, which can introduce defects. Defects in clinical decision support (CDS) tools are surprisingly common. Feasible approaches to prevent and detect defects in EHR configuration, including CDS tools, are needed. In complex software systems, use of test–driven development and automated regression testing promotes reliability. Test–driven development encourages modular, testable design and expanding regression test coverage. Automated regression test suites improve software quality, providing a “safety net” for future software modifications. Each automated acceptance test serves multiple purposes, as requirements (prior to build), acceptance testing (on completion of build), regression testing (once live), and “living” design documentation. Rapid-cycle development or “agile” methods are being successfully applied to CDS development. The agile practice of automated test–driven development is not widely adopted, perhaps because most EHR software code is vendor-developed. However, key CDS advisory configuration design decisions and rules stored in the EHR may prove amenable to automated testing as “executable requirements.” Objective We aimed to establish feasibility of acceptance test–driven development of clinical decision support advisories in a commonly used EHR, using an open source automated acceptance testing framework (FitNesse). Methods Acceptance tests were initially constructed as spreadsheet tables to facilitate clinical review. Each table specified one aspect of the CDS advisory’s expected behavior. Table contents were then imported into a test suite in FitNesse, which queried the EHR database to automate testing. Tests and corresponding CDS configuration were migrated together from the development environment to production, with tests becoming part of the production regression test suite. Results We used test–driven development to construct a new CDS tool advising Emergency Department nurses to perform a swallowing assessment prior to administering oral medication to a patient with suspected stroke. Test tables specified desired behavior for (1) applicable clinical settings, (2) triggering action, (3) rule logic, (4) user interface, and (5) system actions in response to user input. Automated test suite results for the “executable requirements” are shown prior to building the CDS alert, during build, and after successful build. Conclusions Automated acceptance test–driven development and continuous regression testing of CDS configuration in a commercial EHR proves feasible with open source software. Automated test–driven development offers one potential contribution to achieving high-reliability EHR configuration. Vetting acceptance tests with clinicians elicits their input on crucial configuration details early during initial CDS design and iteratively during rapid-cycle optimization. PMID:29653922

A Practical Framework Toward Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools.

PubMed

Akseli, Ilgaz; Xie, Jingjin; Schultz, Leon; Ladyzhynsky, Nadia; Bramante, Tommasina; He, Xiaorong; Deanne, Rich; Horspool, Keith R; Schwabe, Robert

2017-01-01

Enabling the paradigm of quality by design requires the ability to quantitatively correlate material properties and process variables to measureable product performance attributes. Conventional, quality-by-test methods for determining tablet breaking force and disintegration time usually involve destructive tests, which consume significant amount of time and labor and provide limited information. Recent advances in material characterization, statistical analysis, and machine learning have provided multiple tools that have the potential to develop nondestructive, fast, and accurate approaches in drug product development. In this work, a methodology to predict the breaking force and disintegration time of tablet formulations using nondestructive ultrasonics and machine learning tools was developed. The input variables to the model include intrinsic properties of formulation and extrinsic process variables influencing the tablet during manufacturing. The model has been applied to predict breaking force and disintegration time using small quantities of active pharmaceutical ingredient and prototype formulation designs. The novel approach presented is a step forward toward rational design of a robust drug product based on insight into the performance of common materials during formulation and process development. It may also help expedite drug product development timeline and reduce active pharmaceutical ingredient usage while improving efficiency of the overall process. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Development and optimization of a new culture media using extruded bean as nitrogen source.

PubMed

Batista, Karla A; Fernandes, Kátia F

2015-01-01

The composition of a culture medium is one of the most important parameters to be analyzed in biotechnological processes with industrial purposes, because around 30-40% of the production costs were estimated to be accounted for the cost of the growth medium [1]. Since medium optimization using a one-factor-at-a-time approach is time-consuming, expensive, and often leads to misinterpretation of results, statistical experimental design has been applied to medium optimization for growth and metabolite production [2-5]. In this scenario, the use of mixture design to develop a culture medium containing a cheaper nitrogen source seems to be more appropriate and simple. In this sense, the focus of this work is to present a detailed description of the steps involved in the development of a optimized culture medium containing extruded bean as nitrogen source. •In a previous work we tested a development of new culture media based on the composition of YPD medium, aiming to reduce bioprocess costs as well as to improve the biomass production and heterologous expression.•The developed medium was tested for growth of Saccharomyces cerevisiae and Pichia pastoris (GS 115).•The use of culture media containing extruded bean as sole nitrogen source showed better biomass production and protein expression than those observed in the standard YPD medium.

The effect of adhesive dressing edges on cutaneous irritancy and skin barrier function.

PubMed

Dykes, P J

2007-03-01

To assess the effect of repeated application and removal of adhesive edges from wound-care products on cutaneous irritancy and barrier function in normal volunteer subjects. This was a study using a 'repeat-insult patch test'. Adhesive edges from six commonly used wound-care products were applied continuously to the same site (six applications over a 14-day period) in 30 normal volunteer subjects. The test sites were assessed clinically before product reapplication using established ranking scales for cutaneous erythema. The cumulative irritancy score (CIS) for each test site was determined by adding the erythema scores at days 3, 5, 8, 10, 12 and 15. At the study end the barrier function of each test site was assessed by measuring transepidermal water loss (TEWL). The CIS showed that the products fall into two distinct groups, with Mepilex, Tielle and Allevyn giving low scores and Biatain, Comfeel and DuoDERM higher scores. Statistical analysis indicated significant differences (p < 0.05) between Mepilex and Biatain, Mepilex and Comfeel, Mepilex and DuoDERM, Tielle and Biatain, Allevyn and Biatain. The mean TEWL values also indicated that the products fall into two distinct groups: Mepilex, Tielle and Allevyn with low mean values close to that of normal adjacent back skin and Biatain, Comfeel and DuoDERM with much higher mean values. Statistical analysis indicated that Mepilex, Tielle and Allevyn were not significantly different from normal skin (p < 0.05), whereas Biatain, Comfeel and DuoDERM were significantly higher than normal skin and the other products tested. The results show clear differences between products; the clinical scores and TEWL measurements indicate that the products fall into two distinct groups. This novel approach seems able to discriminate between adhesive borders and may be useful during product development and in selecting products for clinical trials.

A Distributed Online Curriculum and Courseware Development Model

ERIC Educational Resources Information Center

Durdu, Pinar Onay; Yalabik, Nese; Cagiltay, Kursat

2009-01-01

A distributed online curriculum and courseware development model (DONC[superscript 2]) is developed and tested in this study. Courseware development teams which may work in different institutions who need to develop high quality, reduced cost, on time products will be the users of DONC[superscript 2]. The related features from the disciplines of…

MSU-Northern Bio-Energy Center of Excellence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kegel, Greg; Windy Boy, Jessica; Maglinao, Randy Latayan

The goal of this project was to establish the Bio-Energy Center (the Center) of Montana State University Northern (MSUN) as a Regional Research Center of Excellence in research, product development, and commercialization of non-food biomass for the bio-energy industry. A three-step approach, namely, (1) enhance the Center’s research and testing capabilities, (2) develop advanced biofuels from locally grown agricultural crops, and (3) educate the community through outreach programs for public understanding and acceptance of new technologies was identified to achieve this goal. The research activities aimed to address the obstacles concerning the production of biofuels and other bio-based fuel additivesmore » considering feedstock quality, conversion process, economic viability, and public awareness. First and foremost in enhancing the capabilities of the Center is the improvement of its laboratories and other physical facilities for investigating new biomass conversion technologies and the development of its manpower complement with expertise in chemistry, engineering, biology, and energy. MSUN renovated its Auto Diagnostics building and updated its mechanical and electrical systems necessary to house the state-of-the-art 525kW (704 hp) A/C Dynamometer. The newly renovated building was designated as the Advanced Fuels Building. Two laboratories, namely Biomass Conversion lab and Wet Chemistry lab were also added to the Center’s facilities. The Biomass Conversion lab was for research on the production of advanced biofuels including bio-jet fuel and bio-based fuel additives while the Wet Chemistry lab was used to conduct catalyst research. Necessary equipment and machines, such as gas chromatograph-mass spectrometry, were purchased and installed to help in research and testing. With the enhanced capabilities of the Center, research and testing activities were very much facilitated and more precise. New biofuels derived from Camelina sativa (camelina), a locally-grown oilseed crop was developed through a chemical process for converting the oil extracted into jet fuel. Promising methods of synthesizing heterogeneous metal complex catalyst that support the chemical conversion process were likewise developed. Breaking-down lignin to valuable chemicals using a metal complex catalyst was also investigated. Lignin is an organic polymer that binds around cellulose and hemicellulose fibers which strengthen cell walls in woody biomass. Test results showed promise and could lead to further exploration of using lignin for fuels and fuel additives. These findings could create another value-added product from lignin that can be sourced from beetle kill trees and product residues from cellulose ethanol plants. Coupled with these research discoveries was the provision of technical support to businesses in terms of product development and commercialization of bio-based products. This in turn opened new avenues for advancing the bio-energy industry in the region and helped support the regional agricultural-based economy through developing biofuels derived from feedstock that are grown locally. It assisted in developing biofuels that reduce exhaust emissions and improve engine performance.« less

Non-destructive vacuum decay method for pre-filled syringe closure integrity testing compared with dye ingress testing and high-voltage leak detection.

PubMed

Simonetti, Andrea; Amari, Filippo

2015-01-01

In reaction to the limitations of the traditional sterility test methods, in 2008, the U.S. Food and Drug Administration issued the guidance "Container and Closure System Integrity Testing in Lieu of Sterility Testing as a Component of the Stability Protocol for Sterile Products" encouraging sterile drug manufacturers to use properly validated physical methods, apart from conventional microbial challenge testing, to confirm container closure integrity as part of the stability protocol. The case study presented in this article investigated the capability of four container closure integrity testing methods to detect simulated defects of different sizes and types on glass syringes, prefilled both with drug product intended for parenteral administration and sterile water. The drug product was a flu vaccine (Agrippal, Novartis Vaccines, Siena, Italy). Vacuum decay, pharmacopoeial dye ingress test, Novartis specific dye ingress test, and high-voltage leak detection were, in succession, the methods involved in the comparative studies. The case study execution was preceded by the preparation of two independent sets of reference prefilled syringes, classified, respectively, as examples of conforming to closure integrity requirements (negative controls) and as defective (positive controls). Positive controls were, in turn, split in six groups, three of with holes laser-drilled through the prefilled syringe glass barrel, while the other three with capillary tubes embedded in the prefilled syringe plunger. These reference populations were then investigated by means of validated equipment used for container closure integrity testing of prefilled syringe commercial production; data were collected and analyzed to determine the detection rate and the percentage of false results. Results showed that the vacuum decay method had the highest performance in terms of detection sensitivity and also ensured the best reliability and repeatability of measurements. An innovative technical solution, preventing possible prefilled syringe plunger movement during container closure integrity testing execution, is presented as well. The growing need to meet sterile drug products' regulatory, quality, and safety expectations has progressively driven new developments and improvements both in container closure integrity testing methods and in the respective equipment, over the last years. Indeed, container closure integrity testing establishes the container closure system capability to provide required protection to the drug product and to demonstrate maintenance of product sterility over its shelf life. This article describes the development of four container closure integrity testing approaches for the evaluation of glass prefilled syringe closure integrity, including two destructive (pharmacopoeial and Novartis specific dye ingress test) and two non-destructive (vacuum decay and high-voltage leak detection) methods. The important finding from the validation of comparative studies was that the vacuum decay method resulted in the most effective, reliable and repeatable detection of defective samples, whether the defect was exposed to sterile water, to drug product, or to air. Complete sets of known defects were created for this purpose (5 μm, 10 μm, 20 μm certified leakages by laser drilled holes and capillary tubes). All investigations and studies were conducted at Bonfiglioli Engineering S.r.l. (Vigarano Pieve, Ferrara, Italy) and at Novartis Vaccines (Sovicille, Siena, Italy). © PDA, Inc. 2015.

A Statistical Perspective on Highly Accelerated Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Edward V.

Highly accelerated life testing has been heavily promoted at Sandia (and elsewhere) as a means to rapidly identify product weaknesses caused by flaws in the product's design or manufacturing process. During product development, a small number of units are forced to fail at high stress. The failed units are then examined to determine the root causes of failure. The identification of the root causes of product failures exposed by highly accelerated life testing can instigate changes to the product's design and/or manufacturing process that result in a product with increased reliability. It is widely viewed that this qualitative use ofmore » highly accelerated life testing (often associated with the acronym HALT) can be useful. However, highly accelerated life testing has also been proposed as a quantitative means for "demonstrating" the reliability of a product where unreliability is associated with loss of margin via an identified and dominating failure mechanism. It is assumed that the dominant failure mechanism can be accelerated by changing the level of a stress factor that is assumed to be related to the dominant failure mode. In extreme cases, a minimal number of units (often from a pre-production lot) are subjected to a single highly accelerated stress relative to normal use. If no (or, sufficiently few) units fail at this high stress level, some might claim that a certain level of reliability has been demonstrated (relative to normal use conditions). Underlying this claim are assumptions regarding the level of knowledge associated with the relationship between the stress level and the probability of failure. The primary purpose of this document is to discuss (from a statistical perspective) the efficacy of using accelerated life testing protocols (and, in particular, "highly accelerated" protocols) to make quantitative inferences concerning the performance of a product (e.g., reliability) when in fact there is lack-of-knowledge and uncertainty concerning the assumed relationship between the stress level and performance. In addition, this document contains recommendations for conducting more informative accelerated tests.« less

Dermal safety assessment of Arm & Hammer laundry products formulated for sensitive skin.

PubMed

Frederick, Douglas M; Vorwerk, Linda; Gupta, Archana; Ghassemi, Annahita

2017-09-01

The prevalence of sensitive skin among the general population in industrialized countries is reported to be over 50%. Sensitive skin subjects often report significant reactions to contact with cosmetics, soaps and other consumer products. This paper describes the overall skin compatibility and mildness program for a newly developed, lightly fragranced, colorant free laundry product (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent), specially formulated for individuals with sensitive skin. The skin mildness of the product was compared to Arm & Hammer™ Free & Clear liquid laundry detergent with no fragrance or colorant, and an established history of safe use by sensitive skin consumers. The test material was a liquid laundry product with a light scent formulated for sensitive skin consumers (Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent). The product was compared to commercially marketed products for sensitive skin with a history of skin safety in the marketplace, including: a very similar product formulation (Arm & Hammer™ Free & Clear with no fragrance), and several selected competitors' products. Studies were conducted among individuals with self-assessed sensitive skin (based on a questionnaire) using standard protocols for the Human Repeat Insult Patch Test (HRIPT), 10-Day Cumulative Irritation, the Wrist Band Wear test, and the Safety In-Use testing. Responses in all protocols were evaluated by visual scoring of potential dermatologic reactions, and recording any sensory effects at the time of the examination. In addition, sensory effects collected from panelists' daily diaries were also evaluated. The HRIPT confirmed that neither the fragrance alone, nor the product formulation with fragrance, induced contact sensitization in sensitive skin subjects. The 10-Day cumulative irritation study conducted using sensitive skin subjects showed highly favorable skin compatibility, and the test product was comparable to the control product (Arm & Hammer Free & Clear) and other nonirritant controls. In the Wrist Band Wear test, exposure to laundered fabrics under exaggerated conditions gave similar results for the test and control products, with no objective signs of skin irritation, and no self-reported persistent adverse sensory effects. Very mild, transient and isolated sensory effects were noted in daily diaries by a small proportion of subjects, and were similar for the test and control products. The Safety In-Use tests evaluated 4-week exposure to product and laundered fabrics under realistic use conditions. There were no clinically objective signs of skin irritation, and reports of transitory, mild sensory effects were minimal and similar for the test and controls. A comprehensive skin safety program on a lightly scented sensitive skin laundry formulation (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent) conducted among panels of self-assessed sensitive skin subjects demonstrated that the presence of a light fragrance did not adversely impact skin compatibility in any of the testing protocols when the product was compared to a similar product with no fragrance. The lightly fragranced product demonstrated overall skin compatibility and mildness when tested in a self-assessed sensitive skin population, and compared favorably to currently marketed sensitive skin products.

Development of the First World Health Organization Lentiviral Vector Standard: Toward the Production Control and Standardization of Lentivirus-Based Gene Therapy Products

PubMed Central

Zhao, Yuan; Stepto, Hannah; Schneider, Christian K

2017-01-01

Gene therapy is a rapidly evolving field. So far, there have been >2,400 gene therapy products in clinical trials and four products on the market. A prerequisite for producing gene therapy products is ensuring their quality and safety. This requires appropriately controlled and standardized production and testing procedures that result in consistent safety and efficacy. Assuring the quality and safety of lentivirus-based gene therapy products in particular presents a great challenge because they are cell-based multigene products that include viral and therapeutic proteins as well as modified cells. In addition to the continuous refinement of a product, changes in production sites and manufacturing processes have become more and more common, posing challenges to developers regarding reproducibility and comparability of results. This paper discusses the concept of developing a first World Health Organization International Standard, suitable for the standardization of assays and enabling comparison of cross-trial and cross-manufacturing results for this important vector platform. The standard will be expected to optimize the development of gene therapy medicinal products, which is especially important, given the usually orphan nature of the diseases to be treated, naturally hampering reproducibility and comparability of results. PMID:28747142

RAPA: a novel in vitro method to evaluate anti-bacterial skin cleansing products.

PubMed

Ansari, S A; Gafur, R B; Jones, K; Espada, L A; Polefka, T G

2010-04-01

Development of efficacious anti-bacterial skin cleansing products has been limited by the availability of a pre-clinical (in vitro) method to predict clinical efficacy adequately. We report a simple and rapid method, designated as rapid agar plate assay (RAPA), that uses the bacteriological agar surface as a surrogate substrate for skin and combines elements of two widely used in vivo (clinical) methods (Agar Patch and Cup Scrub). To simulate the washing of the human hand or forearm skin with the test product, trypticase soy agar plates were directly washed with the test product and rinsed under running tap water. After air-drying the washed plates, test bacteria (Staphylococcus aureus or Escherichia coli) were applied and the plates were incubated at 37 degrees C for 18-24 h. Using S. aureus as the test organism, anti-bacterial bar soap containing triclocarbanilide showed a strong linear relationship (R(2) = 0.97) between bacterial dose and their per cent reduction. A similar dose-response relationship (R(2) = 0.96) was observed for anti-bacterial liquid hand soap against E. coli. RAPA was able to distinguish between anti-bacterial products based on the nature and level of actives in them. In limited comparative tests, results obtained by RAPA were comparable with the results obtained by clinical agar patch and clinical cup scrub methods. In conclusion, RAPA provides a simple, rugged and reproducible in vitro method for testing the relative efficacy of anti-bacterial skin cleansing products with a likelihood of comparable clinical efficacy. Further testing is warranted to improve the clinical predictability of this method.

Decision Models for Determining the Optimal Life Test Sampling Plans

NASA Astrophysics Data System (ADS)

Nechval, Nicholas A.; Nechval, Konstantin N.; Purgailis, Maris; Berzins, Gundars; Strelchonok, Vladimir F.

2010-11-01

Life test sampling plan is a technique, which consists of sampling, inspection, and decision making in determining the acceptance or rejection of a batch of products by experiments for examining the continuous usage time of the products. In life testing studies, the lifetime is usually assumed to be distributed as either a one-parameter exponential distribution, or a two-parameter Weibull distribution with the assumption that the shape parameter is known. Such oversimplified assumptions can facilitate the follow-up analyses, but may overlook the fact that the lifetime distribution can significantly affect the estimation of the failure rate of a product. Moreover, sampling costs, inspection costs, warranty costs, and rejection costs are all essential, and ought to be considered in choosing an appropriate sampling plan. The choice of an appropriate life test sampling plan is a crucial decision problem because a good plan not only can help producers save testing time, and reduce testing cost; but it also can positively affect the image of the product, and thus attract more consumers to buy it. This paper develops the frequentist (non-Bayesian) decision models for determining the optimal life test sampling plans with an aim of cost minimization by identifying the appropriate number of product failures in a sample that should be used as a threshold in judging the rejection of a batch. The two-parameter exponential and Weibull distributions with two unknown parameters are assumed to be appropriate for modelling the lifetime of a product. A practical numerical application is employed to demonstrate the proposed approach.

Effects of air speed and liquid temperature on droplet size

USDA-ARS?s Scientific Manuscript database

Advancements in both application hardware (e.g. nozzles and spray assist devices) and spray modification products have led to a number of products that are specifically designed to maximize the spray deposition and minimize off-target. Testing protocols are being developed to objectively measure sp...

Development and Testing of the VAHIRR Radar Product

NASA Technical Reports Server (NTRS)

Barrett, Joe III; Miller, Juli; Charnasky, Debbie; Gillen, Robert; Lafosse, Richard; Hoeth, Brian; Hood, Doris; McNamara, Todd

2008-01-01

Lightning Launch Commit Criteria (LLCC) and Flight Rules (FR) are used for launches and landings at government and commercial spaceports. They are designed to avoid natural and triggered lightning strikes to space vehicles, which can endanger the vehicle, payload, and general public. The previous LLCC and FR were shown to be overly restrictive, potentially leading to costly launch delays and scrubs. A radar algorithm called Volume Averaged Height Integrated Radar Reflectivity (VAHIRR), along with new LLCC and FR for anvil clouds, were developed using data collected by the Airborne Field Mill II research program. VAHIRR is calculated at every horizontal position in the coverage area of the radar and can be displayed similar to a two-dimensional derived reflectivity product, such as composite reflectivity or echo tops. It is the arithmetic product of two quantities not currently generated by the Weather Surveillance Radar 1988 Doppler (WSR-88D): a volume average of the reflectivity measured in dBZ and the average cloud thickness based on the average echo top height and base height. This presentation will describe the VAHIRR algorithm, and then explain how the VAHIRR radar product was implemented and tested on a clone of the National Weather Service's (NWS) Open Radar Product Generator (ORPG-clone). The VAHIRR radar product was then incorporated into the Advanced Weather Interactive Processing System (AWIPS), to make it more convenient for weather forecasters to utilize. Finally, the reliability of the VAHIRR radar product was tested with real-time level II radar data from the WSR-88D NWS Melbourne radar.

Techniques for control of long-term reliability of complex integrated circuits. I - Reliability assurance by test vehicle qualification.

NASA Technical Reports Server (NTRS)

Van Vonno, N. W.

1972-01-01

Development of an alternate approach to the conventional methods of reliability assurance for large-scale integrated circuits. The product treated is a large-scale T squared L array designed for space applications. The concept used is that of qualification of product by evaluation of the basic processing used in fabricating the product, providing an insight into its potential reliability. Test vehicles are described which enable evaluation of device characteristics, surface condition, and various parameters of the two-level metallization system used. Evaluation of these test vehicles is performed on a lot qualification basis, with the lot consisting of one wafer. Assembled test vehicles are evaluated by high temperature stress at 300 C for short time durations. Stressing at these temperatures provides a rapid method of evaluation and permits a go/no go decision to be made on the wafer lot in a timely fashion.

Waterjet processes for coating removal

NASA Technical Reports Server (NTRS)

Burgess, Fletcher; Cosby, Steve; Hoppe, David

1995-01-01

USBI and NASA have been testing and investigating the use of high pressure water for coating removal for approximately the past 12 years at the Automated TPS (Thermal Protection System - ablative materials used for thermal protection during ascent and descent of the solid rocket boosters) Removal Facility located in the Productivity Enhancement Complex at Marshall Space Flight Center. Originally the task was to develop and automate the removal process and transfer the technology to a production facility at Kennedy Space Center. Since that time more and more applications and support roles for the waterjet technology have been realized. The facility has become a vital part of development activities ongoing at MSFC. It supports the development of environmentally compliant insulations, sealants, and coatings. It also supports bonding programs, test motors, and pressure vessels. The most recent role of the cell is supporting Thiokol Corporation's solid rocket motor program in the development of waterjet degreasing and paint stripping methods. Currently vapor degreasing methods use 500,000 lbs. of ozone depleting chemicals per year. This paper describes the major cell equipment, test methods practiced, and coatings that have been removed.

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

1982-01-01

This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

Applied metabolomics in drug discovery.

PubMed

Cuperlovic-Culf, M; Culf, A S

2016-08-01

The metabolic profile is a direct signature of phenotype and biochemical activity following any perturbation. Metabolites are small molecules present in a biological system including natural products as well as drugs and their metabolism by-products depending on the biological system studied. Metabolomics can provide activity information about possible novel drugs and drug scaffolds, indicate interesting targets for drug development and suggest binding partners of compounds. Furthermore, metabolomics can be used for the discovery of novel natural products and in drug development. Metabolomics can enhance the discovery and testing of new drugs and provide insight into the on- and off-target effects of drugs. This review focuses primarily on the application of metabolomics in the discovery of active drugs from natural products and the analysis of chemical libraries and the computational analysis of metabolic networks. Metabolomics methodology, both experimental and analytical is fast developing. At the same time, databases of compounds are ever growing with the inclusion of more molecular and spectral information. An increasing number of systems are being represented by very detailed metabolic network models. Combining these experimental and computational tools with high throughput drug testing and drug discovery techniques can provide new promising compounds and leads.

Joint Land Attack Cruise Missile Defense Elevated Netted Sensor System (JLENS)

DTIC Science & Technology

2013-12-01

Initial Production $M - Millions of Dollars MILCON - Military Construction N /A - Not Applicable O&S - Operating and Support Oth - Other PAUC - Program...RDT&E - Research, Development, Test, and Evaluation SAR - Selected Acquisition Report Sch - Schedule Spt - Support TBD - To Be Determined TY - Then...completion, assess test results, correct short comings/deficiencies, and develop documentation to track and assess program status. On January 31

Wet chemistry instrument prototype

NASA Technical Reports Server (NTRS)

1974-01-01

A wet chemistry instrument prototype for detecting amino acids in planetary soil samples was developed. The importance of amino acids and their condensation products to the development of life forms is explained. The characteristics of the instrument and the tests which were conducted to determine the materials compatibility are described. Diagrams are provided to show the construction of the instrument. Data obtained from the performance tests are reported.

Immunoassay as an analytical tool in agricultural biotechnology.

PubMed

Grothaus, G David; Bandla, Murali; Currier, Thomas; Giroux, Randal; Jenkins, G Ronald; Lipp, Markus; Shan, Guomin; Stave, James W; Pantella, Virginia

2006-01-01

Immunoassays for biotechnology engineered proteins are used by AgBiotech companies at numerous points in product development and by feed and food suppliers for compliance and contractual purposes. Although AgBiotech companies use the technology during product development and seed production, other stakeholders from the food and feed supply chains, such as commodity, food, and feed companies, as well as third-party diagnostic testing companies, also rely on immunoassays for a number of purposes. The primary use of immunoassays is to verify the presence or absence of genetically modified (GM) material in a product or to quantify the amount of GM material present in a product. This article describes the fundamental elements of GM analysis using immunoassays and especially its application to the testing of grains. The 2 most commonly used formats are lateral flow devices (LFD) and plate-based enzyme-linked immunosorbent assays (ELISA). The main applications of both formats are discussed in general, and the benefits and drawbacks are discussed in detail. The document highlights the many areas to which attention must be paid in order to produce reliable test results. These include sample preparation, method validation, choice of appropriate reference materials, and biological and instrumental sources of error. The article also discusses issues related to the analysis of different matrixes and the effects they may have on the accuracy of the immunoassays.

Minimization of diauxic growth lag-phase for high-efficiency biogas production.

PubMed

Kim, Min Jee; Kim, Sang Hun

2017-02-01

The objective of this study was to develop a minimization method of a diauxic growth lag-phase for the biogas production from agricultural by-products (ABPs). Specifically, the effects of proximate composition on the biogas production and degradation rates of the ABPs were investigated, and a new method based on proximate composition combinations was developed to minimize the diauxic growth lag-phase. Experiments were performed using biogas potential tests at a substrate loading of 2.5 g VS/L and feed to microorganism ratio (F/M) of 0.5 under the mesophilic condition. The ABPs were classified based on proximate composition (carbohydrate, protein, and fat etc.). The biogas production patterns, lag phase, and times taken for 90% biogas production (T90) were used for the evaluation of the biogas production with biochemical methane potential (BMP) test. The high- or medium-carbohydrate and low-fat ABPs (cheese whey, cabbage, and skim milk) showed a single step digestion process and low-carbohydrate and high-fat ABPs (bean curd and perilla seed) showed a two-step digestion process. The mixture of high-fat ABPs and high-carbohydrate ABPs reduced the lag-phase and increased the biogas yield more than that from single ABP by 35-46%. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Theorem on the Rank of a Product of Matrices with Illustration of Its Use in Goodness of Fit Testing.

PubMed

Satorra, Albert; Neudecker, Heinz

2015-12-01

This paper develops a theorem that facilitates computing the degrees of freedom of Wald-type chi-square tests for moment restrictions when there is rank deficiency of key matrices involved in the definition of the test. An if and only if (iff) condition is developed for a simple rule of difference of ranks to be used when computing the desired degrees of freedom of the test. The theorem is developed exploiting basics tools of matrix algebra. The theorem is shown to play a key role in proving the asymptotic chi-squaredness of a goodness of fit test in moment structure analysis, and in finding the degrees of freedom of this chi-square statistic.

48 CFR 1852.228-72 - Cross-waiver of liability for space shuttle services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... from space to develop further a payload's product or process except when such development is for Space..., test, training, simulation, or guidance and control equipment and related facilities or services. (6...

Development Of Ultrasonic Testing Based On Delphi Program As A Learning Media In The Welding Material Study Of Detection And Welding Disables In The Environment Of Vocational Education

NASA Astrophysics Data System (ADS)

Dwi Cahyono, Bagus; Ainur, Chandra

2018-04-01

The development of science and technology has a direct impact on the preparation of qualified workers, including the preparation of vocational high school graduates. Law Number 20 the Year 2003 on National Education System explains that the purpose of vocational education is to prepare learners to be ready to work in certain fields. One of the learning materials in Vocational High School is welding and detecting welding defects. Introduction of welding and detecting welding defects, one way that can be done is by ultrasonic testing will be very difficult if only capitalize the book only. Therefore this study aims to adopt ultrasonic testing in a computer system. This system is called Delphi Program-based Ultrasonic Testing Expert System. This system is used to determine the classification and type of welding defects of the welded defect indicator knew. In addition to the system, there is a brief explanation of the notion of ultrasonic testing, calibration procedures and inspection procedures ultrasonic testing. In this system, ultrasonic input data testing that shows defects entered into the computer manually. This system is built using Delphi 7 software and Into Set Up Compiler as an installer. The method used in this research is Research and Development (R & D), with the following stages: (1) preliminary research; (2) manufacture of software design; (3) materials collection; (4) early product development; (5) validation of instructional media experts; (6) product analysis and revision; (8) media trials in learning; And (9) result of end product of instructional media. The result of the research shows that: (1) the result of feasibility test according to ultrasonic material testing expert that the system is feasible to be used as instructional media in welding material subject and welding defect detection in vocational education environment, because it contains an explanation about detection method of welding defect using method Ultrasonic testing in detail; (2) feasibility test results according to media experts, that this system has a very attractive visual, user friendly, compatible with windows and Linux and media size that is not too large; And (3) result of test by using data of indication of welding defect in PT PAL Surabaya, obtained classification data of welding defect in accordance with calculation of welding defect classification.

Feasibility of Using Fluorescence Spectrophotometry to Develop a Sensitive Dye Immersion Method for Container Closure Integrity Testing of Prefilled Syringes.

PubMed

Lu, Xujin; Lloyd, David K; Klohr, Steven E

2016-01-01

A feasibility study was conducted for a sensitive and robust dye immersion method for the measurement of container closure integrity of unopened prefilled syringes using fluorescence spectrophotometry as the detection method. A Varian Cary Eclipse spectrofluorometer was used with a custom-made sample holder to position the intact syringe in the sample compartment for fluorescence measurements. Methylene blue solution was initially evaluated as the fluorophore in a syringe with excitation at 607 nm and emission at 682 nm, which generated a limit of detection of 0.05 μg/mL. Further studies were conducted using rhodamine 123, a dye with stronger fluorescence. Using 480 nm excitation and 525 nm emission, the dye in the syringe could be easily detected at levels as low as 0.001 μg/mL. The relative standard deviation for 10 measurements of a sample of 0.005 μg/mL (with repositioning of the syringe after each measurement) was less than 1.1%. A number of operational parameters were optimized, including the photomultiplier tube voltage, excitation, and emission slit widths. The specificity of the testing was challenged by using marketed drug products and a protein sample, which showed no interference to the rhodamine detection. Results obtained from this study demonstrated that using rhodamine 123 for container closure integrity testing with in-situ (in-syringe) fluorescence measurements significantly enhanced the sensitivity and robustness of the testing and effectively overcame limitations of the traditional methylene blue method with visual or UV-visible absorption detection. Ensuring container closure integrity of injectable pharmaceutical products is necessary to maintain quality throughout the shelf life of a sterile drug product. Container closure integrity testing has routinely been used to evaluate closure integrity during product development and production line qualification of prefilled syringes, vials, and devices. However, container closure integrity testing has recently gained industry attention due to increased regulatory agency scrutiny regarding the analytical rigor of container closure integrity testing methods and expectations to use container closure integrity testing in lieu of sterility tests in stability programs. Methylene blue dye is often used for dye ingress testing of container closure integrity, but we found it unsuitable for reliable detection of small breaches in prefilled syringes of drug product. This work describes the suitability and advantages of using a fluorescent dye and spectroscopic detection for a robust, sensitive, and quality control-friendly container closure integrity testing method for prefilled syringes. © PDA, Inc. 2016.

Risk-based Strategy to Determine Testing Requirement for the Removal of Residual Process Reagents as Process-related Impurities in Bioprocesses.

PubMed

Qiu, Jinshu; Li, Kim; Miller, Karen; Raghani, Anil

2015-01-01

The purpose of this article is to recommend a risk-based strategy for determining clearance testing requirements of the process reagents used in manufacturing biopharmaceutical products. The strategy takes account of four risk factors. Firstly, the process reagents are classified into two categories according to their safety profile and history of use: generally recognized as safe (GRAS) and potential safety concern (PSC) reagents. The clearance testing of GRAS reagents can be eliminated because of their safe use historically and process capability to remove these reagents. An estimated safety margin (Se) value, a ratio of the exposure limit to the estimated maximum reagent amount, is then used to evaluate the necessity for testing the PSC reagents at an early development stage. The Se value is calculated from two risk factors, the starting PSC reagent amount per maximum product dose (Me), and the exposure limit (Le). A worst-case scenario is assumed to estimate the Me value, that is common. The PSC reagent of interest is co-purified with the product and no clearance occurs throughout the entire purification process. No clearance testing is required for this PSC reagent if its Se value is ≥1; otherwise clearance testing is needed. Finally, the point of the process reagent introduction to the process is also considered in determining the necessity of the clearance testing for process reagents. How to use the measured safety margin as a criterion for determining PSC reagent testing at process characterization, process validation, and commercial production stages are also described. A large number of process reagents are used in the biopharmaceutical manufacturing to control the process performance. Clearance testing for all of the process reagents will be an enormous analytical task. In this article, a risk-based strategy is described to eliminate unnecessary clearance testing for majority of the process reagents using four risk factors. The risk factors included in the strategy are (i) safety profile of the reagents, (ii) the starting amount of the process reagents used in the manufacturing process, (iii) the maximum dose of the product, and (iv) the point of introduction of the process reagents in the process. The implementation of the risk-based strategy can eliminate clearance testing for approximately 90% of the process reagents used in the manufacturing processes. This science-based strategy allows us to ensure patient safety and meet regulatory agency expectations throughout the product development life cycle. © PDA, Inc. 2015.

MULTIPLY: Development of a European HSRL Airborne Facility

NASA Astrophysics Data System (ADS)

Binietoglou, Ioannis; Serikov, Ilya; Nicolae, Doina; Amiridis, Vassillis; Belegante, Livio; Boscornea, Andrea; Brugmann, Bjorn; Costa Suros, Montserrat; Hellmann, David; Kokkalis, Panagiotis; Linne, Holger; Stachlewska, Iwona; Vajaiac, Sorin-Nicolae

2016-08-01

MULTIPLY is a novel airborne high spectral resolution lidar (HSRL) currently under development by a consortium of European institutions from Romania, Germany, Greece, and Poland. Its aim is to contribute to calibration and validations activities of the upcoming ESA aerosol sensing missions like ADM-Aeolus, EarthCARE and the Sentinel-3/-4/-5/-5p which include products related to atmospheric aerosols. The effectiveness of these missions depends on independent airborne measurements to develop and test the retrieval methods, and validate mission products following launch. The aim of ESA's MULTIPLY project is to design, develop, and test a multi-wavelength depolarization HSRL for airborne applications. The MULTIPLY lidar will deliver the aerosol extinction and backscatter coefficient profiles at three wavelengths (355nm, 532nm, 1064nm), as well as profiles of aerosol intensive parameters (Ångström exponents, extinction- to-backscatter ratios, and linear particle depolarization ratios).

Smart Aquarium as Physics Learning Media for Renewable Energy

NASA Astrophysics Data System (ADS)

Desnita, D.; Raihanati, R.; Susanti, D.

2018-04-01

Smart aquarium has been developed as a learning media to visualize Micro Hydro Power Generator (MHPG). Its used aquarium water circulation system and Wind Power Generation (WPG) which generated through a wheel as a source. Its also used to teach about energy changes, circular motion and wheel connection, electromagnetic impact, and AC power circuit. The output power and system efficiency was adjusted through the adjustment of water level and wind speed. Specific targets in this research are: to achieved: (i) develop green aquarium technology that’s suitable to used as a medium of physics learning, (ii) improving quality of process and learning result at a senior high school student. Research method used development research by Borg and Gall, which includes preliminary studies, design, product development, expert validation, and product feasibility test, and vinalisation. The validation test by the expert states that props feasible to use. Limited trials conducted prove that this tool can improve students science process skills.

The Business of Testing.

PubMed

Jolosky, Theo; Watson, Carol

2015-01-01

Theodore Millon was a brilliant man: erudite, thoughtful, confident, deliberate, and curious. He was an integrative thinker. It is widely known how these characteristics manifested themselves in his landmark work in the areas of personality theory, personality development, and personality assessment. What is likely less well known is that he displayed these same characteristics in and to the world of business; in particular, his relationships with those who published and distributed his assessment measures. This article traces those relationships. Various components are explored, ranging from product development to product marketing, from the protection of intellectual property to the development and execution of contracts, from deciding how and when to revise a test to ensuring that his legacy continues long into the future. Although the primary dynamic of these relationships was commercial, the reasons for their success were personal. Common goals, clarity of communication, persistence, respect, and trust allowed these relationships to develop, prosper, evolve, and endure.

Contamination Detection and Mitigation Strategies for Unsymmetric Dimethylhydrazine/Nitrogen Tetroxide Non-Combustion Product Residues

NASA Technical Reports Server (NTRS)

Greene, Benjamin; Buchanan, Vanessa D.; Baker, David L.

2006-01-01

Dimethylamine and nitrite, which are non-combustion reaction products of unsymmetrical dimethylhydrazine (UDMH) and nitrogen tetroxide (NTO) propellants, can contaminate spacesuits during extra-vehicular activity (EVA) operations. They can react with water in the International Space Station (ISS) airlock to form N-nitrosodimethylamine (NDMA), a carcinogen. Detection methods for assessing nitrite and dimethylamine contamination were investigated. The methods are based on color-forming reactions in which intensity of color is proportional to concentration. A concept color detection kit using a commercially available presumptive field test for methamphetamine coupled with nitrite test strips was developed and used to detect dimethylamine and nitrite. Contamination mitigation strategies were also developed.

Antibody to hepatitis b core antigen

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, R.G.; Irwin, G.R.

1976-01-01

The work presented in this paper describes the production of HBcAg in chimpanzees, the development of a sensitive radioimmune test for anti-HBc, and the application of the test to the diagnosis and ultimately, to the prevention of HBV in the military. (GRA)

Pilot testing of SHRP 2 reliability data and analytical products: Minnesota.

DOT National Transportation Integrated Search

2015-01-01

The Minnesota pilot site has undertaken an effort to test data and analytical tools developed through the Strategic Highway Research Program (SHRP) 2 Reliability focus area. The purpose of these tools is to facilitate the improvement of travel time r...

Soils Sampling and Testing Training Guide for Field and Laboratory Technicians on Roadway Construction

DOT National Transportation Integrated Search

1999-12-01

This manual has been developed as a training guide for field and laboratory technicians responsible for sampling and testing of soils used in roadway construction. Soils training and certification will increase the knowledge of laboratory, production...

Multidisciplinary approach to successful implementation of production information system (PRISM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shariff, M.R.; Gopalakrishnan, S.G.; Francis, N.

1995-12-31

A company wide corporate and regional production database supporting all production areas was envisaged critical to the current expansion within Petronas Carigali Sdn Bhd (PCSB). A multi disciplinary project team was thus formed to analyze the requirements prior to developing, testing, implementing and training users. PCSB has currently evolved into a mature E & P company on par with other E & P companies within the region. This expansion necessitates a common Production Information System for the efficient dissemination of vital Production Information for Production Surveillance, Reservoir Management, Reserve Assessment, Special Studies and Standardized Group-wide Reporting. This paper will discussmore » all the phases involved in the project which includes Systems Requirement Study, Data Migration, System Development, System Implementation and Post-Implementation Plan.« less

Summary report of PQRI Workshop on Nanomaterial in Drug Products: current experience and management of potential risks.

PubMed

Bartlett, Jeremy A; Brewster, Marcus; Brown, Paul; Cabral-Lilly, Donna; Cruz, Celia N; David, Raymond; Eickhoff, W Mark; Haubenreisser, Sabine; Jacobs, Abigail; Malinoski, Frank; Morefield, Elaine; Nalubola, Ritu; Prud'homme, Robert K; Sadrieh, Nakissa; Sayes, Christie M; Shahbazian, Hripsime; Subbarao, Nanda; Tamarkin, Lawrence; Tyner, Katherine; Uppoor, Rajendra; Whittaker-Caulk, Margaret; Zamboni, William

2015-01-01

At the Product Quality Research Institute (PQRI) Workshop held last January 14-15, 2014, participants from academia, industry, and governmental agencies involved in the development and regulation of nanomedicines discussed the current state of characterization, formulation development, manufacturing, and nonclinical safety evaluation of nanomaterial-containing drug products for human use. The workshop discussions identified areas where additional understanding of material attributes, absorption, biodistribution, cellular and tissue uptake, and disposition of nanosized particles would continue to inform their safe use in drug products. Analytical techniques and methods used for in vitro characterization and stability testing of formulations containing nanomaterials were discussed, along with their advantages and limitations. Areas where additional regulatory guidance and material characterization standards would help in the development and approval of nanomedicines were explored. Representatives from the US Food and Drug Administration (USFDA), Health Canada, and European Medicines Agency (EMA) presented information about the diversity of nanomaterials in approved and newly developed drug products. USFDA, Health Canada, and EMA regulators discussed the applicability of current regulatory policies in presentations and open discussion. Information contained in several of the recent EMA reflection papers was discussed in detail, along with their scope and intent to enhance scientific understanding about disposition, efficacy, and safety of nanomaterials introduced in vivo and regulatory requirements for testing and market authorization. Opportunities for interaction with regulatory agencies during the lifecycle of nanomedicines were also addressed at the meeting. This is a summary of the workshop presentations and discussions, including considerations for future regulatory guidance on drug products containing nanomaterials.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fred D. Brent; Lalit Shah; Earl Berry

The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which uses petroleum coke to produce at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals using ChevronTexaco's proprietary gasification technology. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site; develop a Research, Development, and Testing (RD&T) Plan to mitigate technical risks and barriers; and prepare a Preliminary Project Financing Plan. The objective of Phase IImore » is to implement the work as outlined in the Phase I RD&T Plan to enhance the development and commercial acceptance of coproduction technology. The objective of Phase III is to develop an engineering design package and a financing and testing plan for an EECP located at a specific site. The project's intended result is to provide the necessary technical, economic, and environmental information needed by industry to move the EECP forward to detailed design, construction, and operation. The partners in this project are Texaco Energy Systems LLC or TES (a subsidiary of ChevronTexaco), General Electric (GE), Praxair, and Kellogg Brown & Root (KBR) in addition to the U.S. Department of Energy (DOE). TES is providing gasification technology and Fischer-Tropsch (F-T) technology developed by Rentech, GE is providing combustion turbine technology, Praxair is providing air separation technology, and KBR is providing engineering. Each of the EECP subsystems was assessed for technical risks and barriers. A plan was developed to mitigate the identified risks (Phase II RD&T Plan, October 2000). The potential technical and economic risks to the EECP from Task 2.5 can be mitigated by demonstrating that the end-use products derived from the upgrading of the F-T synthesis total liquid product can meet or exceed current specifications for the manufacture of ethylene and propylene chemicals from F-T naphtha, for the generation of hydrogen from F-T naphtha to power fuel cells, for direct blending of F-T diesels into transportation fuels, for the conversion of F-T heavy product wax to transportation fuels, and the conversion of F-T Heavy product wax to a valuable high melting point food-grade specialty wax product. Product evaluations conducted under Task 2.5 of Phase II successfully mitigated the above technical and economic risks to the EECP with the development of product yields and product qualities for the production of chemicals, transportation fuels, and specialty food-grade waxes from the F-T synthesis products.« less

[Simultaneous determination of pesticide residues in agricultural products by LC-MS/MS].

PubMed

Watanabe, Minae; Ueno, Eiji; Inoue, Tomomi; Ohno, Haruka; Ikai, Yoshitomo; Morishita, Toshio; Oshima, Harumi; Hayashi, Rumiko

2013-01-01

A method for the simultaneous determination of multiple pesticide residues in agricultural products was developed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The sample was extracted with acetonitrile. Co-extractives were removed by GPC/graphitized carbon column SPE, and silica gel/PSA cartridge column SPE. Pesticides in the test solution were determined by LC-MS/MS using scheduled MRM. Recoveries of 124 pesticides from spinach, brown rice, soybean, orange and tomato were tested at the level of 0.1 µg/g, and those of 121 pesticides ranged from 70 to 120% (RSD≤15%). Pesticide residues in 239 agricultural products were investigated by this method, and residues of 49 pesticides were detected in 98 agricultural products.

Testnodes: a Lightweight Node-Testing Infrastructure

NASA Astrophysics Data System (ADS)

Fay, R.; Bland, J.

2014-06-01

A key aspect of ensuring optimum cluster reliability and productivity lies in keeping worker nodes in a healthy state. Testnodes is a lightweight node testing solution developed at Liverpool. While Nagios has been used locally for general monitoring of hosts and services, Testnodes is optimised to answer one question: is there any reason this node should not be accepting jobs? This tight focus enables Testnodes to inspect nodes frequently with minimal impact and provide a comprehensive and easily extended check with each inspection. On the server side, Testnodes, implemented in python, interoperates with the Torque batch server to control the nodes production status. Testnodes remotely and in parallel executes client-side test scripts and processes the return codes and output, adjusting the node's online/offline status accordingly to preserve the integrity of the overall batch system. Testnodes reports via log, email and Nagios, allowing a quick overview of node status to be reviewed and specific node issues to be identified and resolved quickly. This presentation will cover testnodes design and implementation, together with the results of its use in production at Liverpool, and future development plans.