Differences in rates of switchbacks after switching from branded to authorized generic and branded to generic drug products: cohort study

PubMed Central

Sarpatwari, Ameet; Dejene, Sara; Khan, Nazleen F; Lii, Joyce; Rogers, James R; Dutcher, Sarah K; Raofi, Saeid; Bohn, Justin; Connolly, John; Fischer, Michael A; Kesselheim, Aaron S; Gagne, Joshua J

2018-01-01

Abstract Objectives To compare rates of switchbacks to branded drug products for patients switched from branded to authorized generic drug products, which have the same active ingredients, appearance, and excipients as the branded product, with patients switched from branded to generic drug products, which have the same active ingredients as the branded product but may differ in appearance and excipients. Design Observational cohort study. Setting Private (a large commercial health plan) and public (Medicaid) insurance programs in the US. Participants Beneficiaries of a large US commercial health insurer between 2004 and 2013 (primary cohort) and Medicaid beneficiaries between 2000 and 2010 (replication cohort). Main outcome measures Patients taking branded products for one of the study drugs (alendronate tablets, amlodipine tablets, amlodipine-benazepril capsules, calcitonin salmon nasal spray, escitalopram tablets, glipizide extended release tablets, quinapril tablets, and sertraline tablets) were identified when they switched to an authorized generic or a generic drug product after the date of market entry of generic drug products. These patients were followed for switchbacks to the branded drug product in the year after their switch to an authorized generic or a generic drug product. Cox proportional hazard models were used to estimate hazard ratios and 95% confidence intervals after adjusting for demographics, including age, sex, and calendar year. Inverse variance meta-analysis was used to pool adjusted hazard ratios across all drug products. Results A total of 94 909 patients switched from branded to authorized generic drug products and 116 017 patients switched from branded to generic drug products and contributed to the switchback analysis. Unadjusted incidence rates of switchback varied across drug products, ranging from a low of 3.8 per 100 person years (for alendronate tablets) to a high of 17.8 per 100 person years (for amlodipine-benazepril capsules), with an overall rate of 8.2 per 100 person years across all drug products. Adjusted switchback rates were consistently lower for patients who switched from branded to authorized generic drug products compared with branded to generic drug products in the primary cohort (pooled hazard ratio 0.72, 95% confidence interval 0.64 to 0.81). Similar results (0.75, 0.62 to 0.91) were observed in the replication cohort. Conclusion Switching from branded to authorized generic drug products was associated with lower switchback rates compared with switching from branded to generic drug products. PMID:29615391

JPRS Report Science & Technology Europe Economic Competitiveness.

DTIC Science & Technology

1991-09-20

supply the European production centers of Nissan and Toyota with presses. Wafer Production Imminent in Europe The third area mentioned by Katada in...files were opened, or an increase of 117% as compared to the figure cited by the Court for 1988. - small returns: The rates practised by the...are participating in EUREKA projects, as compared to a participation rate of approx- imately 10 percent for major companies. "I have a dream of

Exact solutions for the entropy production rate of several irreversible processes.

PubMed

Ross, John; Vlad, Marcel O

2005-11-24

We investigate thermal conduction described by Newton's law of cooling and by Fourier's transport equation and chemical reactions based on mass action kinetics where we detail a simple example of a reaction mechanism with one intermediate. In these cases we derive exact expressions for the entropy production rate and its differential. We show that at a stationary state the entropy production rate is an extremum if and only if the stationary state is a state of thermodynamic equilibrium. These results are exact and independent of any expansions of the entropy production rate. In the case of thermal conduction we compare our exact approach with the conventional approach based on the expansion of the entropy production rate near equilibrium. If we expand the entropy production rate in a series and keep terms up to the third order in the deviation variables and then differentiate, we find out that the entropy production rate is not an extremum at a nonequilibrium steady state. If there is a strict proportionality between fluxes and forces, then the entropy production rate is an extremum at the stationary state even if the stationary state is far away from equilibrium.

Diet and self-rated health among oldest-old Chinese.

PubMed

An, Ruopeng; Xiang, Xiaoling; Liu, Junyi; Guan, Chenghua

Dietary behavior is a central modifiable risk factor for human health. This study examined the longitudinal relationship between dietary habits and self-rated health among the oldest-old Chinese. Participants aged 80 years and above (N = 7273) were first interviewed in 1998 and followed in subsequent waves 2-3 years apart till 2011-2012 in the Chinese Longitudinal Healthy Longevity Survey. Cox proportional hazards regressions were performed to estimate the effects of dietary habits on poor self-rated health, adjusting for various individual characteristics. Compared to those who rarely/never consumed fruit, vegetable, meat, egg, and soybean-derived product, participants consuming such products almost every day were 28%, 20%, 32%, 16%, and 16% less likely to report poor self-rated health during follow-up, respectively. Compared to those who rarely/never consumed fruit, meat, fish, soybean-derived product, and tea, participants consuming such products occasionally were 12%, 24%, 11%, 15%, and 14% less likely to report poor self-rated health during follow-up, respectively. Compared to those who rarely/never consumed sugar, participants consuming sugar almost every day were 14% more likely to report poor self-rated health during follow-up. The effects of dietary habits on self-rated health to some extent differed by sex. Oldest-old Chinese could gain health benefit from regular consumption of fruit, vegetable, meat, fish, egg, soybean-derived product, and tea; whereas their sugar consumption may need to be reduced. Future research is warranted to establish the recommended daily nutrient allowances for the oldest-old adults and better address the nutritional needs of this vulnerable population. Copyright © 2018 Elsevier B.V. All rights reserved.

A comparative study of glycerol and sorbitol as co-substrates in methanol-induced cultures of Pichia pastoris: temperature effect and scale-up simulation.

PubMed

Berrios, Julio; Flores, María-Olga; Díaz-Barrera, Alvaro; Altamirano, Claudia; Martínez, Irene; Cabrera, Zaida

2017-03-01

The production of recombinant proteins by Pichia pastoris under AOX1 promoter is usually performed using methanol together with either glycerol or sorbitol as co-substrate. Although both co-substrates have been widely used, comparative studies are scarce. In addition, these comparisons have been performed at different specific growth rate (µ) that it is well known that has an important effect on productivity. Thus, the effect of using these co-substrates on the production of Rhyzopus oryzae lipase (ROL) by P. pastoris was compared in continuous cultures growing at the same µ at either 22 or 30 °C. Results show that using glycerol as co-substrate led to higher volumetric productivities, and lower specific and volumetric methanol consumption rates. Scale-up simulation with 10-10,000 L bioreactor sizes indicated that glycerol produced the highest volumetric productivity of ROL with lower aeration requirements. Therefore, glycerol rises as a better option than sorbitol in ROL production.

Culture characteristics of the atmospheric and room temperature plasma-mutated Spirulina platensis mutants in CO2 aeration culture system for biomass production.

PubMed

Tan, Yinyee; Fang, Mingyue; Jin, Lihua; Zhang, Chong; Li, He-Ping; Xing, Xin-Hui

2015-10-01

For biomass production of Spirulina platensis as feedstock of fermentation, the culture characteristics of three typical mutants of 3-A10, 3-B2 and 4-B3 generated by atmospheric and room temperature plasmas (ARTP) mutagenesis were systematically studied by using CO2 aeration culture system and compared with the wild strain. The specific growth rate of wild strain in the pure air aeration culture system exhibited a 76.2% increase compared with static culture, while the specific growth rates of the 3-A10, 3-B2 and 4-B3 in pure air aeration culture system were increased by 114.4%, 95.9% and 88.2% compared with their static cultures. Compared with static culture, the carbohydrate contents of wild strain, 3-A10, 3-B2 and 4-B3 in pure air aeration culture system dropped plainly by 51.0%, 79.3%, 85.5% and 26.1%. Increase of CO2 concentration enhanced carbohydrate content and productivity. Based on the carbohydrate productivity, the optimal inlet of CO2 concentration in aeration culture was determined to be 12% (v/v). Under this condition, 3-B2 exhibited the highest carbohydrate content (30.7%), CO2 fixation rate (0.120gCO2·g(-1)·d(-1)) and higher growth rate (0.093 g L(-1)·d(-1)), while 3-A10 showed the highest growth rate (0.118 g L(-1)·d(-1)) and higher CO2 fixation rate (0.117gCO2·g(-1)·d(-1)) but low carbohydrate content (24.5%), and 4-B3 showed the highest chlorophyll (Chl) content (3.82 mg·g(-1)). The most outstanding mutant by static culture in terms of growth rate and carbohydrate productivity (3-B2), was also demonstrated by CO2 aeration culture system. This study revealed that the ARTP mutagenesis could generate the S. platensis mutants suitable for CO2 aeration culture aiming at biomass production. Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Productivity Trends in Intercity Trucking

ERIC Educational Resources Information Center

Carnes, Richard B.

1974-01-01

Productivity trends indicate intercity trucking productivity increased an average 2.7 percent a year, a fairly uniform increased productivity rate but substantially lower as compared to air carrier, railroad, and pipeline transportation. Factors affecting productivity are gradual introduction of technological innovation, larger capacity trucks,…

Assessment of work intensification by managers and psychological distressed and non-distressed employees: a multilevel comparison.

PubMed

Bamberger, Simon Grandjean; Larsen, Anelia; Vinding, Anker Lund; Nielsen, Peter; Fonager, Kirsten; Nielsen, René Nesgaard; Ryom, Pia; Omland, Øyvind

2015-01-01

Work intensification is a popular management strategy to increase productivity, but at the possible expense of employee mental stress. This study examines associations between ratings of work intensification and psychological distress, and the level of agreement between compared employee-rated and manager-rated work intensification. Multi-source survey data were collected from 3,064 employees and 573 company managers from the private sector in 2010. Multilevel regression models were used to compare different work intensification ratings across psychological distress strata. Distressed employees rated higher degree of total work intensification compared to non-distressed employees, and on three out of five sub ratings there were an increased prevalence of work intensification in the case group. In general, there was poor agreement between employee and company work intensification rating. Neither manager-rated work intensification nor employee/manager discrepancy in work intensification ratings was associated with psychological distress. Distressed employees had a higher total score of employee/manager agreed work intensification, and a higher prevalence of increased demands of labour productivity. This study demonstrates higher ratings of employee/manager agreed work intensification in distressed employees compared to non-distressed employees, challenging previous findings of reporting bias in distressed employees' assessment of work environment.

Assessment of work intensification by managers and psychological distressed and non-distressed employees: a multilevel comparison

PubMed Central

BAMBERGER, Simon Grandjean; LARSEN, Anelia; VINDING, Anker Lund; NIELSEN, Peter; FONAGER, Kirsten; NIELSEN, René Nesgaard; RYOM, Pia; OMLAND, Øyvind

2015-01-01

Work intensification is a popular management strategy to increase productivity, but at the possible expense of employee mental stress. This study examines associations between ratings of work intensification and psychological distress, and the level of agreement between compared employee-rated and manager-rated work intensification. Multi-source survey data were collected from 3,064 employees and 573 company managers from the private sector in 2010. Multilevel regression models were used to compare different work intensification ratings across psychological distress strata. Distressed employees rated higher degree of total work intensification compared to non-distressed employees, and on three out of five sub ratings there were an increased prevalence of work intensification in the case group. In general, there was poor agreement between employee and company work intensification rating. Neither manager-rated work intensification nor employee/manager discrepancy in work intensification ratings was associated with psychological distress. Distressed employees had a higher total score of employee/manager agreed work intensification, and a higher prevalence of increased demands of labour productivity. This study demonstrates higher ratings of employee/manager agreed work intensification in distressed employees compared to non-distressed employees, challenging previous findings of reporting bias in distressed employees’ assessment of work environment. PMID:25752252

Randomized comparative trial of nicotine polacrilex, a transdermal patch, nasal spray, and an inhaler.

PubMed

Hajek, P; West, R; Foulds, J; Nilsson, F; Burrows, S; Meadow, A

1999-09-27

There are several nicotine replacement products on the market, and physicians are likely to be asked with increasing frequency about which of these products their patients should use. To provide a basis for rational advice by comparing nicotine polacrilex (gum), a transdermal patch, nasal spray, and an inhaler. Randomized trial with assessments at the quit date and 1, 4, and 12 weeks later. Hospital smokers' clinic. Male and female community volunteers (N = 504) smoking 10 or more cigarettes per day and seeking help to stop smoking. Patients were given brief advice, and purchased their nicotine replacement treatment at approximately half the regular retail price. Nicotine replacement treatment use, ratings of withdrawal symptoms, ratings of product characteristics and helpfulness, and biochemically validated continuous lapse-free abstinence. The products did not differ in their effects on withdrawal discomfort, urges to smoke, or rates of abstinence. The continuous validated 12-week abstinence rates were 20%, 21%, 24%, and 24% in the gum, patch, spray, and inhaler groups, respectively. Compliance with recommended nicotine replacement treatment use was high for the patch, low for gum, and very low for the spray and the inhaler. The spray was underused because of adverse effects more often than the other products. In the subjects using the spray, the level of use among abstainers at week 1 predicted outcome at week 12. The inhaler was rated as more embarrassing to use than the other products, but provided at least as much nicotine as the gum. When asked about nicotine replacement treatment products available, physicians should note that, despite low compliance with the recommended dose of the spray and inhaler and differences in product ratings, overall, there are no notable differences between the products in their effects on withdrawal discomfort, perceived helpfulness, or general efficacy.

Young adults’ risk perceptions of various tobacco products relative to cigarettes – results from the National Young Adult Health Survey

PubMed Central

Delnevo, Cristine D.

2015-01-01

Objectives Tobacco product risk perceptions may influence whether individuals use those products instead of or in addition to regular cigarettes. This study aimed to explore risk perceptions of various tobacco products relative to traditional cigarettes with young adults, a group with higher rates of tobacco use. Methods We examined risk perception responses among a nationally representative sample of young adults (ages 18–34)(n=2871)(including tobacco and non-tobacco users) from the 2011 National Young Adult Health Survey. Results Most (57.8%) respondents believed that e-cigarettes were less risky than cigarettes. Respondents were more likely to rate combustible products hookah (24.5%) and cigars (13.9%) as being less risky compared to non-combustible snus (10%) and other smokeless tobacco (SLT) products (7.1%) relative to cigarettes. Few (2.5%) rated menthol cigarettes as less risky. For e-cigarettes, hookah, and SLT, less risky beliefs were significantly higher among ever or current versus never product users. Between 22–33% of all respondents believed that SLT, snus, menthol cigarettes and cigars were more risky than cigarettes, but differences in this belief between current and non-users of these products were small and insignificant. Younger young adults were more likely to rate e-cigarettes and hookah as being “less risky” and rate cigars and SLT as being “more risky” than older young adults. Conclusion The public’s views of comparative tobacco risk perceptions vary widely by tobacco product type, and age group. While “less risky” perceptions may be associated with product use, perceptions that products are “more risky” than cigarettes may not necessarily dissuade people from their use. PMID:26304709

Young Adults' Risk Perceptions of Various Tobacco Products Relative to Cigarettes: Results From the National Young Adult Health Survey.

PubMed

Wackowski, Olivia A; Delnevo, Cristine D

2016-06-01

Objectives Tobacco product risk perceptions may influence whether individuals use those products instead of or in addition to regular cigarettes. This study aimed to explore risk perceptions of various tobacco products relative to traditional cigarettes with young adults, a group with higher rates of tobacco use. Method We examined risk perception responses among a nationally representative sample of young adults (age 18-34 years; n = 2,871, including tobacco and non-tobacco users) from the 2011 National Young Adult Health Survey. Results Most (57.8%) respondents believed that e-cigarettes were less risky than cigarettes. Respondents were more likely to rate combustible products hookah (24.5%) and cigars (13.9%) as being less risky compared to noncombustible snus (10%) and other smokeless tobacco (SLT) products (7.1%) relative to cigarettes. Few (2.5%) rated menthol cigarettes as less risky. For e-cigarettes, hookah, and SLT, less risky beliefs were significantly higher among ever or current versus never product users. Between 22% and 33% of all respondents believed that SLT, snus, menthol cigarettes, and cigars were more risky than cigarettes, but differences in this belief between current and nonusers of these products were small and insignificant. Younger young adults were more likely to rate e-cigarettes and hookah as being "less risky" and rate cigars and SLT as being "more risky" than older young adults. Conclusion The public's views of comparative tobacco risk perceptions vary widely by tobacco product type and age-group. While "less risky" perceptions may be associated with product use, perceptions that products are "more risky" than cigarettes may not necessarily dissuade people from their use. © 2015 Society for Public Health Education.

The Effect of Comparatively-Framed versus Similarity-Framed E-Cigarette and Snus Print Ads on Young Adults’ Ad and Product Perceptions

PubMed Central

Banerjee, Smita C.; Greene, Kathryn; Li, Yuelin; Ostroff, Jamie S.

2016-01-01

Objectives This study examined the effects of comparative-framing [C-F; ads highlighting differences between the advertised product and conventional cigarettes and/or smokeless tobacco products] versus similarity-framing (S-F; ads highlighting congruence with conventional cigarettes and/or smokeless tobacco products) in e-cigarette and snus ads on young adult smokers’ and non-smokers’ ad- and product-related perceptions. Methods One thousand fifty one (1,051) young adults (18–24 years; 76% women; 50% smokers) from existing consumer panels were recruited in a within-subjects quasi-experiment. Each participant viewed 4 online advertisements, varied by tobacco product type (e-cigarette or snus) and ad framing (C-F or S-F). The dependent measures for this study were ad-related (ad perceptions, ad credibility) and product-related perceptions (absolute and comparative risk perceptions, product appeal, and product use intentions). Results Former and current smokers rated C-F ads as more persuasive than S-F ads, as evidenced by favorable ad perceptions and high product use intentions. Former and current smokers also rated e-cigarette ads with more favorable ad perceptions, low absolute and comparative risk perceptions, high product appeal, and high product use intentions as compared to snus ads. However, the effect sizes of the significant differences are less than.2, indicating small magnitude of difference between the study variables. Conclusions Unless FDA regulates e-cig and snus advertising, there is a potential of decreasing risk perceptions and increasing use of e-cigs among young adults. Further research on implicit/explicit comparative claims in e-cigarettes and snus advertisements that encourage risk misperceptions is recommended. PMID:28042597

The Effect of Comparatively-Framed versus Similarity-Framed E-Cigarette and Snus Print Ads on Young Adults' Ad and Product Perceptions.

PubMed

Banerjee, Smita C; Greene, Kathryn; Li, Yuelin; Ostroff, Jamie S

2016-07-01

This study examined the effects of comparative-framing [C-F; ads highlighting differences between the advertised product and conventional cigarettes and/or smokeless tobacco products] versus similarity-framing (S-F; ads highlighting congruence with conventional cigarettes and/or smokeless tobacco products) in e-cigarette and snus ads on young adult smokers' and non-smokers' ad- and product-related perceptions. One thousand fifty one (1,051) young adults (18-24 years; 76% women; 50% smokers) from existing consumer panels were recruited in a within-subjects quasi-experiment. Each participant viewed 4 online advertisements, varied by tobacco product type (e-cigarette or snus) and ad framing (C-F or S-F). The dependent measures for this study were ad-related (ad perceptions, ad credibility) and product-related perceptions (absolute and comparative risk perceptions, product appeal, and product use intentions). Former and current smokers rated C-F ads as more persuasive than S-F ads, as evidenced by favorable ad perceptions and high product use intentions. Former and current smokers also rated e-cigarette ads with more favorable ad perceptions, low absolute and comparative risk perceptions, high product appeal, and high product use intentions as compared to snus ads. However, the effect sizes of the significant differences are less than.2, indicating small magnitude of difference between the study variables. Unless FDA regulates e-cig and snus advertising, there is a potential of decreasing risk perceptions and increasing use of e-cigs among young adults. Further research on implicit/explicit comparative claims in e-cigarettes and snus advertisements that encourage risk misperceptions is recommended.

Effects of the thermal sterilization procedure on polymeric products

NASA Technical Reports Server (NTRS)

Campbell, B. A.; Kalfayan, S. H.

1971-01-01

Properties of samples are tested, after thermal exposure, and values are compared with unexposed samples. Thermal stability or compatibility ratings of formulated or compounded organic polymers using trade names are made and degree of change in measured properties is assessed. Products are rated compatible, marginal, or not compatible.

Comparison of two front-of-package nutrition labeling schemes, and their explanation, on consumers' perception of product healthfulness and food choice.

PubMed

Lundeberg, Pamela J; Graham, Dan J; Mohr, Gina S

2018-06-01

Front-of-package (FOP) nutrition labels are increasingly used to present nutritional information to consumers. A variety of FOP nutrition schemes exist for presenting condensed nutrition information. The present study directly compared two symbolic FOP labeling systems - traffic light and star-based schemes - with specific regard to healthfulness perception and purchase intention for a variety of products. Additionally, this study investigated which method of message framing (gain, loss, gain + loss) would best enable individuals to effectively utilize the FOP labels. College students (n = 306) viewed food packages featuring either star or traffic light FOP labels and rated the healthfulness of each product and their likelihood of purchasing the product. Within each label type, participants were presented with differently-framed instructions regarding how to use the labels. Participants who viewed the star labels rated products with the lowest healthfulness as significantly less healthful and rated products with the highest healthfulness as significantly more healthful compared to participants who viewed those same products with traffic light labels. Purchase intention did not differ by label type. Additionally, including any type of framing (gain, loss, or gain + loss) assisted consumers in differentiating between foods with mid-range vs. low nutritional value. Star-based labels led more healthful foods to be seen as even more healthful and less healthful foods to be seen as even less healthful compared to the same foods with traffic light labels. Additionally, results indicate a benefit of including framing information for FOP nutrition label instructions; however, no individual frame led to significantly different behavior compared to the other frames. While ratings of product healthfulness were influenced by the framing and the label type, purchase intention was not impacted by either of these factors. Copyright © 2018 Elsevier Ltd. All rights reserved.

Enhanced kefiran production by mixed culture of Lactobacillus kefiranofaciens and Saccharomyces cerevisiae.

PubMed

Cheirsilp, Benjamas; Shimizu, Hiroshi; Shioya, Suteaki

2003-01-09

In a batch mixed culture of Lactobacillus kefiranofaciens and Saccharomyces cerevisiae, which could assimilate lactic acid, cell growth and kefiran production rates of L. kefiranofaciens significantly increased, compared with those in pure cultures. The kefiran production rate was 36 mg l(-1) h(-1) in the mixed culture under the anaerobic condition, which was greater than that in the pure culture (24 mg l(-1) h(-1)). Under the aerobic condition, a more intensive interaction between these two strains was observed and higher kefiran production rate (44 mg l(-1) h(-1)) was obtained compared with that under the anaerobic condition. Kefiran production was further enhanced by an addition of fresh medium in the fed-batch mixed culture. In the fed-batch mixed culture, a final kefiran concentration of 5.41 g l(-1) was achieved at 87 h, thereby attaining the highest productivity at 62 mg l(-1) h(-1). Simulation study considered the reduction of lactic acid in pure culture was performed to estimate the additional effect of coculture with S. cerevisiae. Slightly higher cell growth and kefiran production rates in the mixed culture than those expected from pure culture by simulation were observed. These results suggest that coculture of L. kefiranofaciens and S. cerevisiae not only reduces the lactic acid concentration by consumption but also stimulates cell growth and kefiran production of L. kefiranofaciens.

Deciphering mRNA Sequence Determinants of Protein Production Rate

NASA Astrophysics Data System (ADS)

Szavits-Nossan, Juraj; Ciandrini, Luca; Romano, M. Carmen

2018-03-01

One of the greatest challenges in biophysical models of translation is to identify coding sequence features that affect the rate of translation and therefore the overall protein production in the cell. We propose an analytic method to solve a translation model based on the inhomogeneous totally asymmetric simple exclusion process, which allows us to unveil simple design principles of nucleotide sequences determining protein production rates. Our solution shows an excellent agreement when compared to numerical genome-wide simulations of S. cerevisiae transcript sequences and predicts that the first 10 codons, which is the ribosome footprint length on the mRNA, together with the value of the initiation rate, are the main determinants of protein production rate under physiological conditions. Finally, we interpret the obtained analytic results based on the evolutionary role of the codons' choice for regulating translation rates and ribosome densities.

Effects of a Voluntary Front-of-Pack Nutrition Labelling System on Packaged Food Reformulation: The Health Star Rating System in New Zealand

PubMed Central

Eyles, Helen; Choi, Yeun-Hyang

2017-01-01

Interpretive, front-of-pack (FOP) nutrition labels may encourage reformulation of packaged foods. We aimed to evaluate the effects of the Health Star Rating (HSR), a new voluntary interpretive FOP labelling system, on food reformulation in New Zealand. Annual surveys of packaged food and beverage labelling and composition were undertaken in supermarkets before and after adoption of HSR i.e., 2014 to 2016. Outcomes assessed were HSR uptake by food group star ratings of products displaying a HSR label; nutritional composition of products displaying HSR compared with non-HSR products; and the composition of products displaying HSR labels in 2016 compared with their composition prior to introduction of HSR. In 2016, two years after adoption of the voluntary system, 5.3% of packaged food and beverage products surveyed (n = 807/15,357) displayed HSR labels. The highest rates of uptake were for cereals, convenience foods, packaged fruit and vegetables, sauces and spreads, and ‘Other’ products (predominantly breakfast beverages). Products displaying HSR labels had higher energy density but had significantly lower mean saturated fat, total sugar and sodium, and higher fibre, contents than non-HSR products (all p-values < 0.001). Small but statistically significant changes were observed in mean energy density (−29 KJ/100 g, p = 0.002), sodium (−49 mg/100 g, p = 0.03) and fibre (+0.5 g/100 g, p = 0.001) contents of HSR-labelled products compared with their composition prior to adoption of HSR. Reformulation of HSR-labelled products was greater than that of non-HSR-labelled products over the same period, e.g., energy reduction in HSR products was greater than in non-HSR products (−1.5% versus −0.4%), and sodium content of HSR products decreased by 4.6% while that of non-HSR products increased by 3.1%. We conclude that roll-out of the voluntary HSR labelling system is driving healthier reformulation of some products. Greater uptake across the full food supply should improve population diets. PMID:28829380

Effects of a Voluntary Front-of-Pack Nutrition Labelling System on Packaged Food Reformulation: The Health Star Rating System in New Zealand.

PubMed

Mhurchu, Cliona Ni; Eyles, Helen; Choi, Yeun-Hyang

2017-08-22

Interpretive, front-of-pack (FOP) nutrition labels may encourage reformulation of packaged foods. We aimed to evaluate the effects of the Health Star Rating (HSR), a new voluntary interpretive FOP labelling system, on food reformulation in New Zealand. Annual surveys of packaged food and beverage labelling and composition were undertaken in supermarkets before and after adoption of HSR i.e., 2014 to 2016. Outcomes assessed were HSR uptake by food group star ratings of products displaying a HSR label; nutritional composition of products displaying HSR compared with non-HSR products; and the composition of products displaying HSR labels in 2016 compared with their composition prior to introduction of HSR. In 2016, two years after adoption of the voluntary system, 5.3% of packaged food and beverage products surveyed ( n = 807/15,357) displayed HSR labels. The highest rates of uptake were for cereals, convenience foods, packaged fruit and vegetables, sauces and spreads, and 'Other' products (predominantly breakfast beverages). Products displaying HSR labels had higher energy density but had significantly lower mean saturated fat, total sugar and sodium, and higher fibre, contents than non-HSR products (all p -values < 0.001). Small but statistically significant changes were observed in mean energy density (-29 KJ/100 g, p = 0.002), sodium (-49 mg/100 g, p = 0.03) and fibre (+0.5 g/100 g, p = 0.001) contents of HSR-labelled products compared with their composition prior to adoption of HSR. Reformulation of HSR-labelled products was greater than that of non-HSR-labelled products over the same period, e.g., energy reduction in HSR products was greater than in non-HSR products (-1.5% versus -0.4%), and sodium content of HSR products decreased by 4.6% while that of non-HSR products increased by 3.1%. We conclude that roll-out of the voluntary HSR labelling system is driving healthier reformulation of some products. Greater uptake across the full food supply should improve population diets.

Indirect comparisons of efficacy and weekly factor consumption during continuous prophylaxis with recombinant factor VIII Fc fusion protein and conventional recombinant factor VIII products.

PubMed

Iorio, A; Krishnan, S; Myrén, K J; Lethagen, S; McCormick, N; Yermakov, S; Karner, P

2017-05-01

Recombinant factor VIII (rFVIII) products with extended half-lives have the potential to improve adherence and outcomes in haemophilia beyond the results obtained with conventional rFVIII products. In the absence of head-to-head comparisons, annualized bleed rates (ABRs) and weekly factor consumption with rFVIII Fc fusion protein (rFVIIIFc) and conventional rFVIII products were indirectly compared using studies of continuous prophylaxis. A systematic literature review was conducted to identify studies of rFVIII products for comparison with rFVIIIFc in the continuous prophylactic treatment of previously treated adolescents and adults with moderate and severe haemophilia A. Mean ABRs were compared between rFVIIIFc and individual rFVIII studies and between rFVIIIFc and a pooled measure for rFVIII estimated by meta-analysis. Comparisons of factor consumption were based on mean or median weekly factor consumption. Results from seven studies of conventional rFVIII products (injections 2-4 times week -1 ) were compared with rFVIIIFc (injections 1.4-2.4 times week -1 ). The pooled mean ABR for rFVIII products was significantly higher compared with rFVIIIFc (difference = 2.0; P = 0.007). Compared with most rFVIII studies, the reported weekly factor consumption was lower with rFVIIIFc [mean differences = 15.5-21.8 IU kg -1 week -1 (17-26%); median differences = 12.7-29.8 IU kg -1 week -1 (16-37%)]. In one comparison, mean weekly factor consumption with rFVIII was significantly lower but mean ABR was significantly higher than rFVIIIFc. Prophylaxis with rFVIIIFc may be associated with improved bleeding rates and lower weekly factor consumption than more frequently injected rFVIII products. Relative to rFVIII products with similar bleeding rates, results indicate that rFVIIIFc is associated with reduced weekly factor consumption while requiring fewer prescribed injections. © 2017 John Wiley & Sons Ltd.

Nearshore Phytoplankton Production on the Louisiana Continental Shelf

NASA Astrophysics Data System (ADS)

Fung, M.; Lehrter, J. C.

2017-12-01

Net heterotrophy has been observed across much of the Louisiana continental shelf (LCS) where hypoxic conditions occur. Recent studies suggest that cross-shelf transport of nearshore organic matter derived from phytoplankton production subsidizes this heterotrophy. To investigate this theory, we conducted two cruises in spring and summer of 2017 to assess the spatial and temporal patterns of primary production (PP) and respiration (R). We focused on nearshore waters across the area of the shelf where hypoxia is most frequently observed. Overall, PP rates were highest (median = 35 mmol O2 m-3 d-1) in nearshore surface waters (sites with <15 m depth and riverine plume locations), but temporal and spatial differences were seen in both the magnitude of PP and R. Nearshore waters in spring had the highest production rates (median = 52.3 mmol O2 m-3 d-1) and were an order of magnitude greater than production in offshore waters (>15 m depth), while summer production rates in the nearshore and offshore areas were comparable. Similarly, spring nearshore respiration rates (11.2 mmol O2 m-3 d-1) were an order of magnitude larger than offshore, and summer respiration rates in the nearshore and offshore areas were comparable. P/R was greatest nearshore in the spring (4.7) and lowest offshore in the summer (0.9). These results suggest that nearshore production is potentially a significant source of organic matter for the observed heterotrophy over most of the LCS, supporting the theory that shelf-wide hypoxia may be largely driven by nearshore production.

Assembly-line Simulation Program

NASA Technical Reports Server (NTRS)

Chamberlain, Robert G.; Zendejas, Silvino; Malhotra, Shan

1987-01-01

Costs and profits estimated for models based on user inputs. Standard Assembly-line Manufacturing Industry Simulation (SAMIS) program generalized so useful for production-line manufacturing companies. Provides accurate and reliable means of comparing alternative manufacturing processes. Used to assess impact of changes in financial parameters as cost of resources and services, inflation rates, interest rates, tax policies, and required rate of return of equity. Most important capability is ability to estimate prices manufacturer would have to receive for its products to recover all of costs of production and make specified profit. Written in TURBO PASCAL.

Jet production in high Q 2 deep-inelastic ep scattering at HERA

NASA Astrophysics Data System (ADS)

Derrick, M.; Krakauer, D.; Magill, S.; Mikunas, D.; Musgrave, B.; Repond, J.; Stanek, R.; Talaga, R. L.; Zhang, H.; Avad, R.; Bari, G.; Basile, M.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Bruni, P.; Romeo, G. Cara; Castellini, G.; Chiarini, M.; Cifarelli, L.; Cindolo, F.; Contin, A.; Corradi, M.; Gialas, I.; Giusti, P.; Iacobucci, G.; Laurenti, G.; Levi, G.; Margotti, A.; Massam, T.; Nania, R.; Nemoz, C.; Palmonari, E.; Polini, A.; Sartorelli, G.; Timellini, R.; Garcia, Y. Zamora; Zichichi, A.; Bargende, A.; Crittenden, J.; Desch, K.; Diekmann, B.; Doeker, T.; Eckert, M.; Feld, L.; Frey, A.; Geerts, M.; Geitz, G.; Grothe, M.; Haas, T.; Hartmann, H.; Haun, D.; Heinloth, K.; Hilger, E.; Jakob, H.-P.; Katz, U. F.; Mari, S. M.; Mass, A.; Mengel, S.; Mollen, J.; Paul, E.; Rembser, Ch.; Schattevoy, R.; Schramm, D.; Stamm, J.; Wedemeyer, R.; Campbell-Robson, S.; Cassidy, A.; Dyce, N.; Foster, B.; George, S.; Gilmore, R.; Heath, G. P.; Heath, H. F.; Llewellyn, T. J.; Morgado, C. J. S.; Norman, D. J. P.; O'Mara, J. A.; Tapper, R. I.; Wilson, S. S.; Yoshida, R.; Rau, R. R.; Arneodo, M.; Iannotti, L.; Schioppa, M.; Susinno, G.; Bernstein, A.; Caldwell, A.; Parsons, J. A.; Ritz, S.; Sciulli, F.; Straub, P. B.; Wai, L.; Yang, S.; Zhu, Q.; Borzemski, P.; Chwastowski, J.; Eskreys, A.; Piotrzkowski, K.; Zachara, M.; Zawiejski, L.; Adamczyk, L.; Bednarek, B.; Eskreys, K.; Jeleń, K.; Kisielewska, D.; Kowalski, T.; Rulikowska-Zarębska, E.; Suszycki, L.; Zając, J.; Kotański, A.; Przybycień, M.; Bauerdick, I. A. T.; Behrens, U.; Beier, H.; Bienlein, J. K.; Coldewey, C.; Deppe, O.; Desler, K.; Drews, G.; Flasiński, M.; Gilkinson, D. J.; Glasman, C.; Göttlicher, P.; Große-Knetter, J.; Gutjahr, B.; Hain, W.; Hasell, D.; Heßling, H.; Hultschig, H.; Iga, Y.; Joos, P.; Kasemann, M.; Klanner, R.; Koch, W.; Köpke, L.; Kötz, U.; Kowalski, H.; Labs, J.; Ladage, A.; Löhr, B.; Löwe, M.; Lüke, D.; Mańczak, O.; Ng, J. S. T.; Nickel, S.; Notz, D.; Ohrenberg, K.; Roco, M.; Rohde, M.; Roldán, J.; Schneekloth, U.; Schulz, W.; Selonke, F.; Stiliaris, E.; Surrow, B.; Voß, T.; Westphal, D.; Wolf, G.; Youngman, C.; Zhou, J. F.; Grabosch, H. J.; Kharchilava, A.; Leich, A.; Mattingly, M.; Meyer, A.; Schlenstedt, S.; Wulff, N.; Barbagli, G.; Pelfer, P.; Anzivino, G.; Maccarrone, G.; de Pasquale, S.; Votano, L.; Bamberger, A.; Eisenhardt, S.; Freidhof, A.; Söldner-Rembold, S.; Schroeder, J.; Trefzger, T.; Brook, N. H.; Bussey, P. J.; Doyle, A. T.; Fleck, I.; Saxon, D. H.; Utley, M. L.; Wilson, A. S.; Dannemann, A.; Holm, U.; Horstmann, D.; Neumann, T.; Sinkus, R.; Wick, K.; Badura, E.; Burow, B. D.; Hagge, L.; Lohrmann, E.; Mainusch, J.; Milewski, J.; Nakahata, M.; Pavel, N.; Poelz, G.; Schott, W.; Zetsche, F.; Bacon, T. C.; Butterworth, I.; Gallo, E.; Harris, V. L.; Hung, B. Y. H.; Long, K. R.; Miller, D. B.; Morawitz, P. P. O.; Prinias, A.; Sedgbeer, J. K.; Whitfield, A. F.; Mallik, U.; McCliment, E.; Wang, M. Z.; Wang, S. M.; Wu, J. T.; Zhang, Y.; Cloth, P.; Filges, D.; An, S. H.; Hong, S. M.; Nam, S. W.; Park, S. K.; Suh, M. H.; Yon, S. H.; Imlay, R.; Kartik, S.; Kim, H.-J.; McNeil, R. R.; Metcalf, W.; Nadendla, V. K.; Barreiro, F.; Cases, G.; Graciani, R.; Hernández, J. M.; Hervás, L.; Labarga, L.; Del Peso, J.; Puga, J.; Terron, J.; de Trocóniz, J. F.; Smith, G. R.; Corriveau, F.; Hanna, D. S.; Hartmann, J.; Hung, L. W.; Lim, J. N.; Matthews, C. G.; Patel, P. M.; Sinclair, L. E.; Stairs, D. G.; Laurent, M. St.; Ullmann, R.; Zacek, G.; Bashkirov, V.; Dolgoshein, B. A.; Stifutkin, A.; Bashindzhagyan, G. L.; Ermolov, P. F.; Gladilin, L. K.; Golubkov, Y. A.; Kobrin, V. D.; Kuzmin, V. A.; Proskuryakov, A. S.; Savin, A. A.; Shcheglova, L. M.; Solomin, A. N.; Zotov, N. P.; Botje, M.; Chlebana, F.; Dake, A.; Engelen, J.; de Kamps, M.; Kooijman, P.; Kruse, A.; Tiecke, H.; Verkerke, W.; Vreeswijk, M.; Wiggers, L.; de Wolf, E.; van Woudenberg, R.; Acosta, D.; Bylsma, B.; Durkin, L. S.; Honscheid, K.; Li, C.; Ling, T. Y.; McLean, K. W.; Murray, W. N.; Park, I. H.; Romanowski, T. A.; Seidlein, R.; Bailey, D. S.; Blair, G. A.; Byrne, A.; Cashmore, R. J.; Cooper-Sarkar, A. M.; Daniels, D.; Devenish, R. C. E.; Harnew, N.; Lancaster, M.; Luffman, P. E.; Lindemann, L.; McFall, J. D.; Nath, C.; Noyes, V. A.; Quadt, A.; Uijterwaal, H.; Walczak, R.; Wilson, F. F.; Yip, T.; Abbiendi, G.; Bertolin, A.; Brugnera, R.; Carlin, R.; Dal Corso, F.; de Giorgi, M.; Dosselli, U.; Limentani, S.; Morandin, M.; Posocco, M.; Stanco, L.; Stroili, R.; Voci, C.; Bulmahn, J.; Butterworth, J. M.; Feild, R. G.; Oh, B. Y.; Whitmore, J. J.; D'Agostini, G.; Marini, G.; Nigro, A.; Tassi, E.; Hart, J. C.; McCubbin, N. A.; Prytz, K.; Shah, T. P.; Short, T. L.; Barberis, L.; Cartiglia, N.; Dubbs, T.; Heusch, C.; van Hook, M.; Hubbard, B.; Lockman, W.; Rahn, J. T.; Sadrozinski, H. F.-W.; Seiden, A.; Biltzinger, J.; Seifert, R. J.; Walenta, A. H.; Zech, G.; Abramowicz, H.; Briskin, G.; Dagan, S.; Levy, A.; Hasegawa, T.; Hazumi, M.; Ishii, T.; Kuze, M.; Mine, S.; Nagasawa, Y.; Nakao, M.; Suzuki, I.; Tokushuku, K.; Yamada, S.; Yamazaki, Y.; Chiba, M.; Hamatsu, R.; Hirose, T.; Homma, K.; Kitamura, S.; Nakamitsu, Y.; Yamauchi, K.; Cirio, R.; Costa, M.; Ferrero, M. I.; Lamberti, L.; Maselli, S.; Peroni, C.; Sacchi, R.; Solano, A.; Staiano, A.; Dardo, M.; Bailey, D. C.; Bandyopadhyay, D.; Benard, F.; Brkic, M.; Crombie, M. B.; Gingrich, D. M.; Hartner, G. F.; Joo, K. K.; Levman, G. M.; Martin, J. F.; Orr, R. S.; Sampson, C. R.; Teuscher, R. J.; Catterall, C. D.; Jones, T. W.; Kaziewicz, P. B.; Lane, J. B.; Saunders, R. L.; Shulman, J.; Blankenship, K.; Kochocki, J.; Lu, B.; Mo, L. W.; Bogusz, W.; Charchula, K.; Ciborowski, J.; Gajewski, J.; Grzelak, G.; Kasprzak, M.; Krzyżanowski, M.; Muchorowski, K.; Nowak, R. J.; Pawlak, J. M.; Tymieniecka, T.; Wróblewski, A. K.; Zakrzewski, J. A.; Żarnecki, A. F.; Adamus, M.; Eisenberg, Y.; Karshon, U.; Revel, D.; Zer-Zion, D.; Ali, I.; Badgett, W. F.; Behrens, B.; Dasu, S.; Fordham, C.; Foudas, C.; Goussiou, A.; Loveless, R. J.; Reeder, D. D.; Silverstein, S.; Smith, W. H.; Vaiciulis, A.; Wodarczyk, M.; Tsurugai, T.; Bhadra, S.; Cardy, M. L.; Fagerstroem, C.-P.; Frisken, W. R.; Furutani, K. M.; Khakzad, M.; Schmidke, W. B.

1995-03-01

Two-jet production in deep-inelastic electron-proton scattering has been studied for 160< Q 2<1280 GeV2, 0.01< x<0.1 and 0.04< y<0.95 with the ZEUS detector at HERA. The kinematic properties of the jets and the jet production rates are presented. The partonic scaling variables of the two-jet system and the rate of two-jet production are compared to perturbative next-to-leading order QCD calculations.

Examination of the relationship between oncology drug labeling revision frequency and FDA product categorization.

PubMed

Berlin, Robert J

2009-09-01

I examined the relationship between the Food and Drug Administration's (FDA's) use of special regulatory designations and the frequency with which labels of oncology drugs are revised to explore how the FDA's designation of products relates to product development and refinement. One hundred oncology drugs, designated by the FDA as accelerated approval, priority review, orphan drug, or traditional review, were identified from publicly available information. Drug information for each product was evaluated to assess the rate at which manufacturers revised product labeling. Rates were compared between specially categorized products and traditional review products (e.g., orphan vs nonorphan drugs) to produce revision rate ratios for each special category. Labeling for accelerated approval and priority review products are revised significantly more frequently than are labels for traditional products. Accelerated approval products are approved based on surrogate endpoints; this approval process anticipates subsequent labeling refinement. Priority review products, however, are approved through a process that is ostensibly as rigorous as traditional review. Their higher than expected label revision rate may suggest deficiencies in the FDA's current priority review evaluation processes.

What You Can Do to Boost America's Productivity.

ERIC Educational Resources Information Center

Radvany, John E.

1979-01-01

Discusses factors contributing to the declining U.S. productivity growth rate and compares U.S. production to Germany and Japan. Presents model programs that have recognized the need to develop in people the desire to work, study, improve, and become more productive citizens. (LRA)

Hydrogen production by geobacter species and a mixed consortium in a microbial electrolysis cell.

PubMed

Call, Douglas F; Wagner, Rachel C; Logan, Bruce E

2009-12-01

A hydrogen utilizing exoelectrogenic bacterium (Geobacter sulfurreducens) was compared to both a nonhydrogen oxidizer (Geobacter metallireducens) and a mixed consortium in order to compare the hydrogen production rates and hydrogen recoveries of pure and mixed cultures in microbial electrolysis cells (MECs). At an applied voltage of 0.7 V, both G. sulfurreducens and the mixed culture generated similar current densities (ca. 160 A/m3), resulting in hydrogen production rates of ca. 1.9 m(3) H2/m3/day, whereas G. metallireducens exhibited lower current densities and production rates of 110 +/- 7 A/m3 and 1.3 +/- 0.1 m3 H2/m3/day, respectively. Before methane was detected in the mixed-culture MEC, the mixed consortium achieved the highest overall energy recovery (relative to both electricity and substrate energy inputs) of 82% +/- 8% compared to G. sulfurreducens (77% +/- 2%) and G. metallireducens (78% +/- 5%), due to the higher coulombic efficiency of the mixed consortium. At an applied voltage of 0.4 V, methane production increased in the mixed-culture MEC and, as a result, the hydrogen recovery decreased and the overall energy recovery dropped to 38% +/- 16% compared to 80% +/- 5% for G. sulfurreducens and 76% +/- 0% for G. metallireducens. Internal hydrogen recycling was confirmed since the mixed culture generated a stable current density of 31 +/- 0 A/m3 when fed hydrogen gas, whereas G. sulfurreducens exhibited a steady decrease in current production. Community analysis suggested that G. sulfurreducens was predominant in the mixed-culture MEC (72% of clones) despite its relative absence in the mixed-culture inoculum obtained from a microbial fuel cell reactor (2% of clones). These results demonstrate that Geobacter species are capable of obtaining similar hydrogen production rates and energy recoveries as mixed cultures in an MEC and that high coulombic efficiencies in mixed culture MECs can be attributed in part to the recycling of hydrogen into current.

Impact of Glycerol as Carbon Source onto Specific Sugar and Inducer Uptake Rates and Inclusion Body Productivity in E. coli BL21(DE3).

PubMed

Kopp, Julian; Slouka, Christoph; Ulonska, Sophia; Kager, Julian; Fricke, Jens; Spadiut, Oliver; Herwig, Christoph

2017-12-21

The Gram-negative bacterium E. coli is the host of choice for a multitude of used recombinant proteins. Generally, cultivation is easy, media are cheap, and a high product titer can be obtained. However, harsh induction procedures using isopropyl β-d-1 thiogalactopyranoside as inducer are often referred to cause stress reactions, leading to a phenomenon known as "metabolic" or "product burden". These high expressions of recombinant proteins mainly result in decreased growth rates and cell lysis at elevated induction times. Therefore, approaches tend to use "soft" or "tunable" induction with lactose and reduce the stress level of the production host. The usage of glucose as energy source in combination with lactose as induction reagent causes catabolite repression effects on lactose uptake kinetics and as a consequence reduced product titer. Glycerol-as an alternative carbon source-is already known to have positive impact on product formation when coupled with glucose and lactose in auto-induction systems, and has been referred to show no signs of repression when cultivated with lactose concomitantly. In recent research activities, the impact of different products on the lactose uptake using glucose as carbon source was highlighted, and a mechanistic model for glucose-lactose induction systems showed correlations between specific substrate uptake rate for glucose or glycerol (q s,C ) and the maximum specific lactose uptake rate (q s,lac,max ). In this study, we investigated the mechanistic of glycerol uptake when using the inducer lactose. We were able to show that a product-producing strain has significantly higher inducer uptake rates when being compared to a non-producer strain. Additionally, it was shown that glycerol has beneficial effects on viability of cells and on productivity of the recombinant protein compared to glucose.

Peer assessment of journal quality in clinical neurology

PubMed Central

Yue, Weiping; Wilson, Concepción S.; Boller, Francois

2007-01-01

Objective: To explore journal quality as perceived by clinicians and researchers in clinical neurology. Methods: A survey was conducted from August 2003 to January 2004. Ratings for 41 selected clinical neurology journals were obtained from 254 members of the World Federation of Neurology (1,500 solicited; response rate 17%). Participants provided demographic information and rated each journal on a 5-point Likert scale. Average ratings for all journals were compared with the ISI's journal impact factors. Ratings for each journal were also compared across geographic regions and respondent publication productivity. Results: The top 5 journals were rated much more highly than the others, with mean ratings greater than 4. Mean journal ratings were highly correlated with journal impact factors (r = 0.67). Most of the top 10 journal ratings were consistent across the subgroups of geographic regions and journal paper productivity. However, significant differences among the different geographical regions and respondent productivity groups were also found for a few journals. Conclusions: The results provide valuable insight on how neurological experts perceive journals in clinical neurology. These results will likely aid researchers and clinicians in identifying potentially desirable research outlets and indicate journal status for editors. Likewise, biomedical librarians may use these results for serials collection development. PMID:17252069

Gamma-radiolytic stability of new methylated TODGA derivatives for minor actinide recycling

DOE PAGES

Galan, Hitos; Zarzana, Christopher A.; Wilden, Andreas; ...

2015-09-15

The stability against gamma radiation of MeTODGA (methyl tetraoctyldiglycolamide) and Me2TODGA (dimethyl tetraoctyldiglycolamide), derivatives from the well-known extractant TODGA (N,N,N',N';-tetraoctyldiglycolamide), were studied and compared. Solutions of MeTODGA and Me2TODGA in alkane diluents were subjected to 60Co γ-irradiation in the presence and absence of nitric acid and analyzed using LC-MS to determine their rates of radiolytic concentration decrease, as well as to identify radiolysis products. The results of product identification from three different laboratories are compared and found to be in good agreement. The diglycolamide (DGA) concentrations decreased exponentially with increasing absorbed dose. The MeTODGA degradation rate constants (dose constants) weremore » uninfluenced by the presence of nitric acid, but the acid increased the rate of degradation for Me2TODGA. The degradation products formed by irradiation are also initially produced in greater amounts in acid-contacted solution, but products may also be degraded by continued radiolysis. As a result, the identified radiolysis products suggest that the weakest bonds are those in the diglycolamide center of these molecules.« less

Optimising the production of succinate and lactate in Escherichia coli using a hybrid of artificial bee colony algorithm and minimisation of metabolic adjustment.

PubMed

Tang, Phooi Wah; Choon, Yee Wen; Mohamad, Mohd Saberi; Deris, Safaai; Napis, Suhaimi

2015-03-01

Metabolic engineering is a research field that focuses on the design of models for metabolism, and uses computational procedures to suggest genetic manipulation. It aims to improve the yield of particular chemical or biochemical products. Several traditional metabolic engineering methods are commonly used to increase the production of a desired target, but the products are always far below their theoretical maximums. Using numeral optimisation algorithms to identify gene knockouts may stall at a local minimum in a multivariable function. This paper proposes a hybrid of the artificial bee colony (ABC) algorithm and the minimisation of metabolic adjustment (MOMA) to predict an optimal set of solutions in order to optimise the production rate of succinate and lactate. The dataset used in this work was from the iJO1366 Escherichia coli metabolic network. The experimental results include the production rate, growth rate and a list of knockout genes. From the comparative analysis, ABCMOMA produced better results compared to previous works, showing potential for solving genetic engineering problems. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Toward a theory of energetically optimal body size in growing animals.

PubMed

Hannon, B M; Murphy, M R

2016-06-01

Our objective was to formulate a general and useful model of the energy economy of the growing animal. We developed a theory that the respiratory energy per unit of size reaches a minimum at a particular point, when the marginal respiratory heat production rate is equal to the average rate. This occurs at what we defined as the energetically optimal size for the animal. The relationship between heat production rate and size was found to be well described by a cubic function in which heat production rate accelerates as the animal approaches and then exceeds its optimal size. Reanalysis of energetics data from the literature often detected cubic curvature in the relationship between heat production rate and body size of fish, rats, chickens, goats, sheep, swine, cattle, and horses. This finding was consistent with the theory for 13 of 17 data sets. The bias-corrected Akaike information criterion indicated that the cubic equation modeled the influence of the size of a growing animal on its heat production rate better than a power function for 11 of 17 data sets. Changes in the sizes and specific heat production rates of metabolically active internal organs, and body composition and tissue turnover rates were found to explain notable portions of the expected increase in heat production rate as animals approached and then exceeded their energetically optimum size. Accelerating maintenance costs in this region decrease net energy available for productive functions. Energetically and economically optimum size criteria were also compared.

Real-life effectiveness and safety of salbutamol Steri-Neb™ vs. Ventolin Nebules® for exacerbations in patients with COPD: Historical cohort study

PubMed Central

Gefen, Eran; Gopalan, Gokul; McDonald, Rosie; Thomas, Vicky; Ming, Simon Wan Yau; Davis, Emily

2018-01-01

Introduction Ventolin Nebules® (reference product; GlaxoSmithKline) was the first licensed nebulizer solution containing the rapid-onset, short-acting β2-agonist salbutamol. Salbutamol Steri-Neb™ (comparator; Teva Pharmaceuticals, Inc.) has the same chemical composition as the reference product. This study evaluated whether the effectiveness of the comparator is non-inferior to the reference product alongside concomitant medications during real-life clinical management of COPD exacerbations. Safety in terms of adverse events (AEs) was also examined. Methods This matched (1:1) historical cohort study evaluated data from 2 UK primary care databases on patients prescribed the salbutamol comparator or reference. The study included a 1-year baseline period, starting 1 year before the index prescription date, and 1-year outcome period. Cohorts were matched for baseline COPD respiratory medications. The primary outcome was analysis of non-inferiority for the comparator versus reference product for the rate of moderate and severe COPD exacerbations. Non-inferiority was satisfied if the 95% confidence interval (CI) upper limit for mean differences in proportions between treatments was <15%. Secondary outcomes were examined through rate ratios (RR) of severe exacerbations and AEs. Results After matching, 1191 patients were included in each cohort. Adjusted upper 95% CI for the difference in proportion of patients experiencing moderate or severe exacerbations between comparator and reference groups was 0.032 (3.2%), demonstrating non-inferiority. No significant differences were observed in rates of moderate and severe exacerbations (RR: 1.00; 95% CI: 0.91, 1.10), severe exacerbations (RR: 0.76; 95% CI: 0.49, 1.17), or AEs (RR: 0.98; 95% CI: 0.78, 1.22) after adjusting for baseline confounders. No significant differences across cohorts were observed for rates of any AE or death. Conclusion This matched cohort study of real-life management of COPD patients supports the salbutamol comparator as non-inferior to the reference product, providing an effective treatment alternative for COPD exacerbations. Comparator and reference safety profiles were similar. PMID:29364929

Degradation of palm oil empty fruit bunch (EFB) into bio-oil in sub-and supercritical solvents

NASA Astrophysics Data System (ADS)

Sarwono, Rakhman; Pusfitasari, Eka Dian

2017-01-01

Hydrothemal Liquefaction (HTL) of empty fruit bunch (EFB) of palm oil in different solvents (water, ethanol and hexane) were comparatively investigated. Experiments were carried out in an autoclave in different EFB loading of 9%, 11%, and 13%. The temperature operation was 350 oC, without any catalysts and reaction time of 5 hours. The efficiency of above solvents in terms of conversion rate, soluble liquid and carbon products were found in this experiments. The water solvent gave higher conversion rate of 35 - 36.5 %, while hexane gave conversion of 17 - 25.25 %, and ethanol gave the lower conversion rate of 12.65 - 30.3%, respectively. Increasing the EFB load decreased the conversion rate for ethanol and hexane solvents, for water there are no significant change in the conversion rate. The bio-oil as soluble liquid produced were in order of water, ethanol, and hexane solvents, respectively. The chemical properties of bio-oil products were significantly affected by the type of liquefaction solvent. The compositional of bio-oil consists of mostly of a mixture of organic acids, ketones, and esters. The hexane and ethanol solvents resulted mostly organic acids. In water solvent resulted 2-pentanone, 4-hydroxy-4-methyl and others substances. According to the bio-oil results, organic solvents resulted higher HHV compared to water solvent. The higher heating value (HHV) of the carbon products were also comparatively, ethanol solvent resulted soluble liquid with higher HHV compared to the water solvent.

Lightcurve of comet Austin(1989c1) and its dust mantle development

NASA Technical Reports Server (NTRS)

Hasegawa, Hitoshi; Watanabe, Jun-Ichi

1992-01-01

Brightness variations of comet Austin(1989c1) were investigated in terms of the variations of water production rate. We translated the visual brightness data into water production rates using Newburn's semi-empirical law. The curve of the water production rates as a function of heliocentric distance was compared with the model calculations that assumed energy balance between the solar incident and vaporization of water. Thermal flow in a dust mantle at a surface of the nucleus is also included in the model. The model calculations including the dust mantle are more favorable for the observed rate than non-dust mantle cases. The extinction after the perihelion passage suggests that the dust mantle developed gradually.

Optimum poultry litter rates for maximum profit vs. yield in cotton production

USDA-ARS?s Scientific Manuscript database

Cotton lint yield responds well to increasing rates of poultry litter fertilization, but little is known of how optimum rates for yield compare with optimum rates for profit. The objectives of this study were to analyze cotton lint yield response to poultry litter application rates, determine and co...

High efficiency cell-recycle continuous sodium gluconate production by Aspergillus niger using on-line physiological parameters association analysis to regulate feed rate rationally.

PubMed

Lu, Fei; Li, Chao; Wang, Zejian; Zhao, Wei; Chu, Ju; Zhuang, Yingping; Zhang, Siliang

2016-11-01

In this paper, a system of cell-recycle continuous fermentation for sodium gluconate (SG) production by Aspergillus niger (A. niger) was established. Based on initial continuous fermentation result (100.0h) with constant feed rate, an automatic feedback strategy to regulate feed rate using on-line physiological parameters (OUR and DO) was proposed and applied successfully for the first time in the improved continuous fermentation (240.5h). Due to less auxiliary time, highest SG production rate (31.05±0.29gL(-1)h(-1)) and highest yield (0.984±0.067molmol(-1)), overall SG production capacity (975.8±5.8gh(-1)) in 50-L fermentor of improved continuous fermentation increased more than 300.0% compared to that of batch fermentation. Improvement of mass transfer and dispersed mycelia morphology were the two major reasons responsible for the high SG production rate. This system had been successfully applied to industrial fermentation and SG production was greatly improved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biosynthesis of poly-3-hydroxybutyrate (PHB) from glycerol by Paracoccus denitrificans in a batch bioreactor: effect of process variables.

PubMed

Kalaiyezhini, D; Ramachandran, K B

2015-01-01

In this study, the kinetics of poly-3-hydroxybutyrate (PHB) biosynthesis from glycerol by Paracoccus denitrificans DSMZ 413 were explored in a batch bioreactor. Effects of inorganic and organic nitrogen source, carbon to nitrogen ratio, and other process variables such as pH, aeration, and initial glycerol concentration on PHB production were investigated in a 2.5-L bioreactor. Yeast extract was found to be the best nitrogen source compared to several organic nitrogen sources tested. At pH 6, specific growth rate, product formation rate, and accumulation of PHB within the cell were maximum. Specific growth rate increased with increase in oxygen transfer rate, but moderate oxygen transfer rate promoted PHB production. High glycerol concentration inhibited specific product formation rate but not growth. High initial carbon/nitrogen (C/N) ratio favored PHB accumulation and its productivity. At a C/N ratio of 21.4 (mol mol(-1)), 10.7 g L(-1) of PHB corresponding to 72% of cell dry weight was attained.

Evidence of regional subsidence and associated interior wetland loss induced by hydrocarbon production, Gulf Coast region, USA

USGS Publications Warehouse

Morton, R.A.; Bernier, J.C.; Barras, J.A.

2006-01-01

Analysis of remote images, elevation surveys, stratigraphic cross-sections, and hydrocarbon production data demonstrates that extensive areas of wetland loss in the northern Gulf Coast region of the United States were associated with large-volume fluid production from mature petroleum fields. Interior wetland losses at many sites in coastal Louisiana and Texas are attributed largely to accelerated land subsidence and fault reactivation induced by decreased reservoir pressures as a result of rapid or prolonged extraction of gas, oil, and associated brines. Evidence that moderately-deep hydrocarbon production has induced land-surface subsidence and reactivated faults that intersect the surface include: (1) close temporal and spatial correlation of fluid production with surficial changes including rapid subsidence of wetland sediments near producing fields, (2) measurable offsets of shallow strata across the zones of wetland loss, (3) large reductions in subsurface pressures where subsidence rates are high, (4) coincidence of orientation and direction of displacement between surface fault traces and faults that bound the reservoirs, and (5) accelerated subsidence rates near producing fields compared to subsidence rates in surrounding areas or compared to geological rates of subsidence. Based on historical trends, subsidence rates in the Gulf Coast region near producing fields most likely will decrease in the future because most petroleum fields are nearly depleted. Alternatively, continued extraction of conventional energy resources as well as potential production of alternative energy resources (geopressured-geothermal fluids) in the Gulf Coast region could increase subsidence and land losses and also contribute to inundation of areas of higher elevation. ?? Springer-Verlag 2006.

The severity of toxic reactions to ephedra: comparisons to other botanical products and national trends from 1993-2002.

PubMed

Woolf, Alan D; Watson, William A; Smolinske, Susan; Litovitz, Toby

2005-01-01

Ephedra is a botanical product widely used to enhance alertness, as a weight loss aide, and as a decongestant. Its reported adverse effects led the Food and Drug Administration (FDA) to ban ephedra-containing products in the United States in 2004. This study's purpose was to compare toxicity from botanical products containing ephedra to nonephedra products. The Toxic Exposure Surveillance System (TESS), a national poison center database, was utilized to determine the number and outcomes of cases involving botanical products reported from 1993-2002. Cases listing both a botanical product and any other drugs or chemicals were excluded a priori. Ten-year hazard rates (moderate outcomes + major outcomes + deaths per 1000 exposures) were used to compare botanical product categories. There were 21,533 toxic exposures with definitive medical outcomes reported over the 10 yrs where a botanical product was the only substance involved. Of these, 4306 (19.9%) had moderate or major medical outcomes and there were two deaths, for an overall hazard score of 200 per 1000 exposures. The number of ephedra reports to poison centers increased 150-fold over the 10-yr period. The hazard rate for products that contained only ephedra was 250 per 1000 exposures and 267 per 1000 exposures for products that contained ephedra and additional ingredients; whereas the hazard score for only nonephedra botanical products was 96 per 1000 exposures. The rate ratios for multibotanical products with ephedra (RR 1.33; 95% C.I. 1.27-1.40) and for single-ingredient ephedra products (RR 1.25; 95% C.I. 1.11-1.40) were both two to six times higher than those of other common botanical products. Yohimbe-containing products had the highest hazard score (417) and rate ratio (2.08; 95% C.I. 1.59-2.80). Ephedra-containing botanical products accounted for a significant number of toxic exposures with severe medical outcomes reported to poison centers. Hazard rate analysis suggests poison center-reported events involving ephedra-containing botanical products were much more likely to result in severe medical outcomes than those involving nonephedra-containing botanical products. These data support recommendations by policymakers that the sale of ephedra should be prohibited to protect consumers. Our data suggest that the botanical product, yohimbe, may also be associated with unacceptably high risks of toxicity and should receive close scrutiny from health policymakers.

A single ultrasound determination of ≥25 follicles ≥3 mm in diameter in dairy heifers is predictive of a reduced productive herd life.

PubMed

Jimenez-Krassel, F; Scheetz, D M; Neuder, L M; Pursley, J R; Ireland, J J

2017-06-01

Fertility and productive herd life (time in herd after birth of first calf) are inferior in dairy cows with relatively low compared with intermediate but not high numbers of follicles growing during ovarian follicular waves. The present study, therefore, tested the hypothesis that fertility and productive herd life are lower in dairy heifers with high follicle numbers compared with age-matched herdmates with fewer follicles. To test this hypothesis, 11 to 15 mo old Holstein heifers were subjected to a single ultrasound measurement of the number of follicles ≥3 mm in diameter. Heifers were classified into a high- (≥25 follicles), mid- (16-24), or low-range (≤15) follicle number group (FNG). All heifers not removed from the herd before first calving (n = 408) had the opportunity to start their fifth or sixth lactation after birth of their first calf. During this time, performance and health parameters for each individual were recorded daily by herd managers. Results showed that heifers in the high-range FNG had a 180-d shorter productive herd life, reduced survival rate, and greater probability of being culled after birth of the first calf, as well as fewer lactations compared with heifers in the low-range FNG. Cows in the high-compared with the mid- or low-range FNG also had greater involuntary culling rates, days open, and services per conception, and lower pregnancy rates during the first, second, or third lactations. We concluded that dairy heifers with ≥25 follicles ≥3 mm in diameter have suboptimal fertility and a shorter productive herd life compared with herdmates with fewer follicles. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Waste Conversion into n-Caprylate and n-Caproate: Resource Recovery from Wine Lees Using Anaerobic Reactor Microbiomes and In-line Extraction

PubMed Central

Kucek, Leo A.; Xu, Jiajie; Nguyen, Mytien; Angenent, Largus T.

2016-01-01

To convert wastes into sustainable liquid fuels and chemicals, new resource recovery technologies are required. Chain elongation is a carboxylate-platform bioprocess that converts short-chain carboxylates (SCCs) (e.g., acetate [C2] and n-butyrate [C4]) into medium-chain carboxylates (MCCs) (e.g., n-caprylate [C8] and n-caproate [C6]) with hydrogen gas as a side product. Ethanol or another electron donor (e.g., lactate, carbohydrate) is required. Competitive MCC productivities, yields (product vs. substrate fed), and specificities (product vs. all products) were only achieved previously from an organic waste material when exogenous ethanol had been added. Here, we converted a real organic waste, which inherently contains ethanol, into MCCs with n-caprylate as the target product. We used wine lees, which consisted primarily of settled yeast cells and ethanol from wine fermentation, and produced MCCs with a reactor microbiome. We operated the bioreactor at a pH of 5.2 and with continuous in-line extraction and achieved a MCC productivity of 3.9 g COD/L-d at an organic loading rate of 5.8 g COD/L-d, resulting in a promising MCC yield of 67% and specificities of 36% for each n-caprylate and n-caproate (72% for both). Compared to all other studies that used complex organic substrates, we achieved the highest n-caprylate-to-ncaproate product ratio of 1.0 (COD basis), because we used increased broth-recycle rates through the forward membrane contactor, which improved in-line extraction rates. Increased recycle rates also allowed us to achieve the highest reported MCC production flux per membrane surface area thus far (20.1 g COD/m2-d). Through microbial community analyses, we determined that an operational taxonomic unit (OTU) for Bacteroides spp. was dominant and was positively correlated with increased MCC productivities. Our data also suggested that the microbiome may have been shaped for improved MCC production by the high broth-recycle rates. Comparable abiotic studies suggest that further increases in the broth-recycle rates could improve the overall mass transfer coefficient and its corresponding MCC production flux by almost 30 times beyond the maximum that we achieved. With improved in-line extraction, the chain-elongation biotechnology production platform offers new opportunities for resource recovery and sustainable production of liquid fuels and chemicals. PMID:27933053

The large deviation function for entropy production: the optimal trajectory and the role of fluctuations

NASA Astrophysics Data System (ADS)

Speck, Thomas; Engel, Andreas; Seifert, Udo

2012-12-01

We study the large deviation function for the entropy production rate in two driven one-dimensional systems: the asymmetric random walk on a discrete lattice and Brownian motion in a continuous periodic potential. We compare two approaches: using the Donsker-Varadhan theory and using the Freidlin-Wentzell theory. We show that the wings of the large deviation function are dominated by a single optimal trajectory: either in the forward direction (positive rate) or in the backward direction (negative rate). The joining of the two branches at zero entropy production implies a non-differentiability and thus the appearance of a ‘kink’. However, around zero entropy production, many trajectories contribute and thus the ‘kink’ is smeared out.

Characterization and optimization of hydrogen production by a salt water blue-green alga Oscillatoria sp. Miami BG 7. II - Use of immobilization for enhancement of hydrogen production

NASA Technical Reports Server (NTRS)

Phlips, E. J.; Mitsui, A.

1986-01-01

The technique of cellular immobilization was applied to the process of hydrogen photoproduction of nonheterocystous, filamentous marine blue-green alga, Oscillatoria sp. Miami BG 7. Immobilization with agar significantly improved the rate and longevity of hydrogen production, compared to free cell suspensions. Rates of H2 production in excess of 13 microliters H2 mg dry/wt h were observed and hydrogen production was sustained for three weeks. Immobilization also provided some stabilization to environmental variability and was adaptable to outdoor light conditions. In general, immobilization provides significant advantages for the production and maintenance of hydrogen photoproduction for this strain.

Evaluation of jojoba meal as a potential supplement in the diet of broiler breeder females during laying.

PubMed

Vermaut, S; De Coninck, K; Bruggeman, V; Onagbesan, O; Flo, G; Cokelaere, M; Decuypere, E

1999-05-01

1. This study was undertaken to investigate whether jojoba meal can be used as a food supplement during the laying period of chickens. 2. The size of eggs laid were smaller and the overall production rate was lower compared to control birds on food without jojoba meal supplementation. Furthermore, both ovary and oviduct weights were lower in jojoba fed birds. 3. This lowering of egg size and production rate was caused by factors present in jojoba which interfere with follicle growth, yolk deposition, progesterone production and the follicular maturation processes, resulting in the ovulation of smaller follicles and a lower ovulation rate.

Quantum Kronecker sum-product low-density parity-check codes with finite rate

NASA Astrophysics Data System (ADS)

Kovalev, Alexey A.; Pryadko, Leonid P.

2013-07-01

We introduce an ansatz for quantum codes which gives the hypergraph-product (generalized toric) codes by Tillich and Zémor and generalized bicycle codes by MacKay as limiting cases. The construction allows for both the lower and the upper bounds on the minimum distance; they scale as a square root of the block length. Many thus defined codes have a finite rate and limited-weight stabilizer generators, an analog of classical low-density parity-check (LDPC) codes. Compared to the hypergraph-product codes, hyperbicycle codes generally have a wider range of parameters; in particular, they can have a higher rate while preserving the estimated error threshold.

Hydrogen Production by Geobacter Species and a Mixed Consortium in a Microbial Electrolysis Cell▿

PubMed Central

Call, Douglas F.; Wagner, Rachel C.; Logan, Bruce E.

2009-01-01

A hydrogen utilizing exoelectrogenic bacterium (Geobacter sulfurreducens) was compared to both a nonhydrogen oxidizer (Geobacter metallireducens) and a mixed consortium in order to compare the hydrogen production rates and hydrogen recoveries of pure and mixed cultures in microbial electrolysis cells (MECs). At an applied voltage of 0.7 V, both G. sulfurreducens and the mixed culture generated similar current densities (ca. 160 A/m3), resulting in hydrogen production rates of ca. 1.9 m3 H2/m3/day, whereas G. metallireducens exhibited lower current densities and production rates of 110 ± 7 A/m3 and 1.3 ± 0.1 m3 H2/m3/day, respectively. Before methane was detected in the mixed-culture MEC, the mixed consortium achieved the highest overall energy recovery (relative to both electricity and substrate energy inputs) of 82% ± 8% compared to G. sulfurreducens (77% ± 2%) and G. metallireducens (78% ± 5%), due to the higher coulombic efficiency of the mixed consortium. At an applied voltage of 0.4 V, methane production increased in the mixed-culture MEC and, as a result, the hydrogen recovery decreased and the overall energy recovery dropped to 38% ± 16% compared to 80% ± 5% for G. sulfurreducens and 76% ± 0% for G. metallireducens. Internal hydrogen recycling was confirmed since the mixed culture generated a stable current density of 31 ± 0 A/m3 when fed hydrogen gas, whereas G. sulfurreducens exhibited a steady decrease in current production. Community analysis suggested that G. sulfurreducens was predominant in the mixed-culture MEC (72% of clones) despite its relative absence in the mixed-culture inoculum obtained from a microbial fuel cell reactor (2% of clones). These results demonstrate that Geobacter species are capable of obtaining similar hydrogen production rates and energy recoveries as mixed cultures in an MEC and that high coulombic efficiencies in mixed culture MECs can be attributed in part to the recycling of hydrogen into current. PMID:19820150

Alcohol Warning Label Perceptions: Do Warning Sizes and Plain Packaging Matter?

PubMed

Al-Hamdani, Mohammed; Smith, Steven M

2017-01-01

There is a dearth of research on the effectiveness of stringent alcohol warning labels. Our experiment tested whether increasing the size of an alcohol health warning lowers product-based ratings. We examined whether plain packaging lowers ratings of alcohol products and the consumers who use them, increases ratings of bottle "boringness," and enhances warning recognition compared with branded packaging. A total of 440 adults (51.7% female) viewed one of three warning sizes (50%, 75%, or 90% of label surface) on either a plain or branded bottle of distilled spirits, wine, and beer. Participants also rated alcohol bottles on product-based (assessing the product itself), consumer-based (assessing perceptions of consumers of the product), and bottle boringness ratings, and then attempted to recognize the correct warning out of four choices. As expected, the size of warning labels lowered product-based ratings. Similarly, plain packaging lowered product-based and consumer-based ratings and increased bottle boringness but only for wine bottles. Further, plain packaging increased the odds of warning recognition on bottles of distilled spirits. This study shows that plain packaging and warning size (similar to the graphic warnings on cigarette packages) affect perceptions about alcohol bottles. It also shows that plain packaging increases the likelihood for correct health warning recognition, which builds the case for alcohol warning and packaging research and policy.

Effect of ultrasound-assisted freezing on the physico-chemical properties and volatile compounds of red radish.

PubMed

Xu, Bao-Guo; Zhang, Min; Bhandari, Bhesh; Cheng, Xin-Feng; Islam, Md Nahidul

2015-11-01

Power ultrasound, which can enhance nucleation rate and crystal growth rate, can also affect the physico-chemical properties of immersion frozen products. In this study, the influence of slow freezing (SF), immersion freezing (IF) and ultrasound-assisted freezing (UAF) on physico-chemical properties and volatile compounds of red radish was investigated. Results showed that ultrasound application significantly improved the freezing rate; the freezing time of ultrasound application at 0.26 W/cm(2) was shorten by 14% and 90%, compared to IF and SF, respectively. UAF products showed significant (p<0.05) reduction in drip loss and phytonutrients (anthocyanins, vitamin C and phenolics) loss. Compared to SF products, IF and UAF products showed better textural preservation and higher calcium content. The radish tissues exhibited better cellular structures under ultrasonic power intensities of 0.17 and 0.26 W/cm(2) with less cell separation and disruption. Volatile compound data revealed that radish aromatic profile was also affected in the freezing process. Copyright © 2015 Elsevier B.V. All rights reserved.

A flexible statistical model for alignment of label-free proteomics data – incorporating ion mobility and product ion information

PubMed Central

2013-01-01

Background The goal of many proteomics experiments is to determine the abundance of proteins in biological samples, and the variation thereof in various physiological conditions. High-throughput quantitative proteomics, specifically label-free LC-MS/MS, allows rapid measurement of thousands of proteins, enabling large-scale studies of various biological systems. Prior to analyzing these information-rich datasets, raw data must undergo several computational processing steps. We present a method to address one of the essential steps in proteomics data processing - the matching of peptide measurements across samples. Results We describe a novel method for label-free proteomics data alignment with the ability to incorporate previously unused aspects of the data, particularly ion mobility drift times and product ion information. We compare the results of our alignment method to PEPPeR and OpenMS, and compare alignment accuracy achieved by different versions of our method utilizing various data characteristics. Our method results in increased match recall rates and similar or improved mismatch rates compared to PEPPeR and OpenMS feature-based alignment. We also show that the inclusion of drift time and product ion information results in higher recall rates and more confident matches, without increases in error rates. Conclusions Based on the results presented here, we argue that the incorporation of ion mobility drift time and product ion information are worthy pursuits. Alignment methods should be flexible enough to utilize all available data, particularly with recent advancements in experimental separation methods. PMID:24341404

A flexible statistical model for alignment of label-free proteomics data--incorporating ion mobility and product ion information.

PubMed

Benjamin, Ashlee M; Thompson, J Will; Soderblom, Erik J; Geromanos, Scott J; Henao, Ricardo; Kraus, Virginia B; Moseley, M Arthur; Lucas, Joseph E

2013-12-16

The goal of many proteomics experiments is to determine the abundance of proteins in biological samples, and the variation thereof in various physiological conditions. High-throughput quantitative proteomics, specifically label-free LC-MS/MS, allows rapid measurement of thousands of proteins, enabling large-scale studies of various biological systems. Prior to analyzing these information-rich datasets, raw data must undergo several computational processing steps. We present a method to address one of the essential steps in proteomics data processing--the matching of peptide measurements across samples. We describe a novel method for label-free proteomics data alignment with the ability to incorporate previously unused aspects of the data, particularly ion mobility drift times and product ion information. We compare the results of our alignment method to PEPPeR and OpenMS, and compare alignment accuracy achieved by different versions of our method utilizing various data characteristics. Our method results in increased match recall rates and similar or improved mismatch rates compared to PEPPeR and OpenMS feature-based alignment. We also show that the inclusion of drift time and product ion information results in higher recall rates and more confident matches, without increases in error rates. Based on the results presented here, we argue that the incorporation of ion mobility drift time and product ion information are worthy pursuits. Alignment methods should be flexible enough to utilize all available data, particularly with recent advancements in experimental separation methods.

Modeling earthquake rate changes in Oklahoma and Arkansas: possible signatures of induced seismicity

USGS Publications Warehouse

Llenos, Andrea L.; Michael, Andrew J.

2013-01-01

The rate of ML≥3 earthquakes in the central and eastern United States increased beginning in 2009, particularly in Oklahoma and central Arkansas, where fluid injection has occurred. We find evidence that suggests these rate increases are man‐made by examining the rate changes in a catalog of ML≥3 earthquakes in Oklahoma, which had a low background seismicity rate before 2009, as well as rate changes in a catalog of ML≥2.2 earthquakes in central Arkansas, which had a history of earthquake swarms prior to the start of injection in 2009. In both cases, stochastic epidemic‐type aftershock sequence models and statistical tests demonstrate that the earthquake rate change is statistically significant, and both the background rate of independent earthquakes and the aftershock productivity must increase in 2009 to explain the observed increase in seismicity. This suggests that a significant change in the underlying triggering process occurred. Both parameters vary, even when comparing natural to potentially induced swarms in Arkansas, which suggests that changes in both the background rate and the aftershock productivity may provide a way to distinguish man‐made from natural earthquake rate changes. In Arkansas we also compare earthquake and injection well locations, finding that earthquakes within 6 km of an active injection well tend to occur closer together than those that occur before, after, or far from active injection. Thus, like a change in productivity, a change in interevent distance distribution may also be an indicator of induced seismicity.

Continuous bio-catalytic conversion of sugar mixture to acetone-butanol-ethanol by immobilized Clostridium acetobutylicum DSM 792.

PubMed

Survase, Shrikant A; van Heiningen, Adriaan; Granström, Tom

2012-03-01

Continuous production of acetone, n-butanol, and ethanol (ABE) was carried out using immobilized cells of Clostridium acetobutylicum DSM 792 using glucose and sugar mixture as a substrate. Among various lignocellulosic materials screened as a support matrix, coconut fibers and wood pulp fibers were found to be promising in batch experiments. With a motive of promoting wood-based bio-refinery concept, wood pulp was used as a cell holding material. Glucose and sugar mixture (glucose, mannose, galactose, arabinose, and xylose) comparable to lignocellulose hydrolysate was used as a substrate for continuous production of ABE. We report the best solvent productivity among wild-type strains using column reactor. The maximum total solvent concentration of 14.32 g L(-1) was obtained at a dilution rate of 0.22 h(-1) with glucose as a substrate compared to 12.64 g L(-1) at 0.5 h(-1) dilution rate with sugar mixture. The maximum solvent productivity (13.66 g L(-1) h(-1)) was obtained at a dilution rate of 1.9 h(-1) with glucose as a substrate whereas solvent productivity (12.14 g L(-1) h(-1)) was obtained at a dilution rate of 1.5 h(-1) with sugar mixture. The immobilized column reactor with wood pulp can become an efficient technology to be integrated with existing pulp mills to convert them into wood-based bio-refineries.

Optimization of the freezing process for hematopoietic progenitor cells: effect of precooling, initial dimethyl sulfoxide concentration, freezing program, and storage in vapor-phase or liquid nitrogen on in vitro white blood cell quality.

PubMed

Dijkstra-Tiekstra, Margriet J; Setroikromo, Airies C; Kraan, Marcha; Gkoumassi, Effimia; de Wildt-Eggen, Janny

2014-12-01

Adding dimethyl sulfoxide (DMSO) to hematopoietic progenitor cells (HPCs) causes an exothermic reaction, potentially affecting their viability. The freezing method might also influence this. The aim was to investigate the effect of 1) precooling of DMSO and plasma (D/P) and white blood cell (WBC)-enriched product, 2) DMSO concentration of D/P, 3) freezing program, and 4) storage method on WBC quality. WBC-enriched product without CD34+ cells was used instead of HPCs. This was divided into six or eight portions. D/P (20 or 50%; precooled or room temperature [RT]) was added to the WBC-enriched product (precooled or RT), resulting in 10% DMSO, while monitoring temperature. The product was frozen using controlled-rate freezing ("fast-rate" or "slow-rate") and placed in vapor-phase or liquid nitrogen. After thawing, WBC recovery and viability were determined. Temperature increased most for precooled D/P to precooled WBC-enriched product, without influence of 20 or 50% D/P, but remained for all variations below 30°C. WBC recovery for both freezing programs was more than 95%. Recovery of WBC viability was higher for slow-rate freezing compared to fast-rate freezing (74% vs. 61%; p < 0.05) and also for 50% compared to 20% D/P (two test variations). Effect of precooling D/P or WBC-enriched product and of storage in vapor-phase or liquid nitrogen was marginal. Based on these results, precooling is not necessary. Fifty percent D/P is preferred over 20% D/P. Slow-rate freezing is preferred over fast-rate freezing. For safety reasons storage in vapor-phase nitrogen is preferred over storage in liquid nitrogen. Additional testing using real HPCs might be necessary. © 2014 AABB.

Methane production and hydrolysis kinetics in the anaerobic degradation of wastewater screenings.

PubMed

Cadavid-Rodríguez, L S; Horan, N

2013-01-01

Anaerobic biodegradability and hydrolysis rates of wastewater screenings were determined using the biochemical methane potential test at 37 °C. The extent and rate of screenings conversion to methane of this complex and particulate substrate were investigated and since two stages of hydrolysis were identified, corresponding to the different types of materials in screenings, a linear and non-linear model was used. No accumulation of intermediary products was observed and so it was possible to use the methane production rate and a linear model to estimate the hydrolysis rate in the first phase of hydrolysis. The measured values of 0.061-0.127 d(-1) are in the range reported for other comparable organic wastes. It was also observed that the inoculum-to-substrate ratio has a large impact on methane production rate of screenings. The difference in biodegradation rates from the materials in screenings and the overall hydrolysis could be represented by the modified Gompertz non-linear model which was able to describe the methane production rate of screenings with a high confidence. Screenings were found to have 52% biodegradability on average and this shows the potential for volatile solids destruction. A two-stage process with an improved hydrolysis rate is proposed to ensure that the full potential of the material is exploited.

Buyer-vendor coordination for fixed lifetime product with quantity discount under finite production rate

NASA Astrophysics Data System (ADS)

Zhang, Qinghong; Luo, Jianwen; Duan, Yongrui

2016-03-01

Buyer-vendor coordination has been widely addressed; however, the fixed lifetime of the product is seldom considered. In this paper, we study the coordination of an integrated production-inventory system with quantity discount for a fixed lifetime product under finite production rate and deterministic demand. We first derive the buyer's ordering policy and the vendor's production batch size in decentralised and centralised systems. We then compare the two systems and show the non-coordination of the ordering policies and the production batch sizes. To improve the supply chain efficiency, we propose quantity discount contract and prove that the contract can coordinate the buyer-vendor supply chain. Finally, we present analytically tractable solutions and give a numerical example to illustrate the benefits of the proposed quantity discount strategy.

Computed rate coefficients and product yields for c-C5H5 + CH3 --> products.

PubMed

Sharma, Sandeep; Green, William H

2009-08-06

Using quantum chemical methods, we have explored the region of the C6H8 potential energy surface that is relevant in predicting the rate coefficients of various wells and major product channels following the reaction between cyclopentadienyl radical and methyl radical, c-C5H5 + CH3. Variational transition state theory is used to calculate the high-pressure-limit rate coefficient for all of the barrierless reactions. RRKM theory and the master equation are used to calculate the pressure dependent rate coefficients for 12 reactions. The calculated results are compared with the limited experimental data available in the literature and the agreement between the two is quite good. All of the rate coefficients calculated in this work are tabulated and can be used in building detailed chemical kinetic models.

Efficacy and Safety of Three Cryotherapy Devices for Wart Treatment: A Randomized, Controlled, Investigator-Blinded, Comparative Study.

PubMed

Walczuk, Imko; Eertmans, Frank; Rossel, Bart; Cegielska, Agnieszka; Stockfleth, Eggert; Antunes, Andre; Adriaens, Els

2018-06-01

Cutaneous warts are common skin lesions, caused by human papillomavirus. For years, liquid nitrogen is the cryogen of choice for wart treatment. Alternatively, several cryogenic devices for home treatment are commercially available. The present trial assessed efficacy and safety of a novel nitrous oxide-based cryogenic device for home use (EndWarts Freeze ® in Europe, Compound W ® Nitro-Freeze in the USA). This investigator-blinded, controlled, randomized study compared the nitrous oxide device (test product) with a dimethylether propane-based product (Wartner ® ; comparator 1). Subjects with common or plantar warts (50/50 ratio) were randomized into two groups (n = 58, test product; n = 40, comparator 1). Sequentially, an extra treatment arm (n = 40) was added to compare with a dimethylether-based product with metal nib (Wortie ® ; comparator 2). Main objective implied comparison of the percentage cured subjects after one to maximum three treatments. Efficacy and safety was evaluated by a blinded investigator. After a maximum of three applications, a significantly (p = 0.001) higher cure rate of 70.7% (Intention-to-Treat analysis) was observed with test product versus 46.2% (comparator 1) and 47.5% (comparator 2). Almost three times more subjects were cured after 1 test product application (29.3%), versus comparator 1 (10.4%) and comparator 2 (12.5%). Reported side effects were transient and typical of cryotherapy. All treatments were well-tolerated. The superior cure rates for the test product versus two comparators can be explained by its design. Combination of nitrous oxide (cooling agent), the specific activation method (holding the liquid coolant in the cap), and skin-conforming polyurethane foam, results in higher cooling efficiency (- 80 °C) and more effective wart freezing. This trial demonstrated that the nitrous oxide device is a safe, user-friendly and effective wart treatment for home use, comparing favourably to dimethylether (propane) devices with higher freezing temperature, regardless of the applicator type. Oystershell Laboratories. Clinicaltrials.gov identifier, NCT03129373.

Milrinone treatment of bovine oocytes during in vitro maturation benefits production of nuclear transfer embryos by improving enucleation rate and developmental competence.

PubMed

Naruse, Kenji; Iga, Kosuke; Shimizu, Manabu; Takenouchi, Naoki; Akagi, Satoshi; Somfai, Tamas; Hirao, Yuji

2012-01-01

In the production of cattle nuclear transfer embryos, the production efficiency is affected by the oocyte developmental competence and successful enucleation rate. This study investigated the effect of treating oocytes with milrinone, a phosphodiesterase inhibitor, on these two characteristics. When cumulus-oocyte complexes (COCs) were cultured for 19 h with 0, 50 or 100 μM of milrinone, the enucleation rate was significantly improved by 100 μM milrinone. However, milrinone treatment during in vitro maturation (IVM) also delayed meiotic progression by at least 2 h, which would affect the examination of enucleation rate and developmental competence of oocytes. Thus, in the second experiment, meiotic resumption was temporarily inhibited with butyrolactone I (BL-I; 100 μM, 18 h) to decrease the delayed maturation caused by milrinone; this enabled a more accurate comparison of the effects of milrinone after oocyte maturation. In nuclear transfer embryo production, oocytes treated with milrinone (100 μM, 20 h) showed a significantly higher rate of enucleation compared with that of control oocytes. This improved enucleation rate was associated with a closer location of the metaphase plate to the first polar body in the treated oocytes compared with that in control oocytes. Furthermore, milrinone improved the frequency of development to the blastocyst stage in the resulting embryos. In conclusion, milrinone supplementation during IVM improved enucleation rates by rendering the metaphase plate in close proximity to the first polar body, and this treatment also improved oocyte developmental competence. These benefits additively improved the yield of cloned embryos that developed to the blastocyst stage.

Factors affecting water balance and percolate production for a landfill in operation.

PubMed

Poulsen, Tjalfe G; Møoldrup, Per

2005-02-01

Percolate production and precipitation data for a full-scale landfill in operation measured over a 13-year period were used to evaluate the impact and importance of the hydrological conditions of landfill sections on the percolate production rates. Both active (open) and closed landfill sections were included in the evaluation. A simple top cover model requiring a minimum of input data was used to simulate the percolate production as a function of precipitation and landfill section hydrology. The results showed that changes over time in the hydrology of individual landfill sections (such as section closure or plantation of trees on top of closed sections) can change total landfill percolate production by more than 100%; thus, percolate production at an active landfill can be very different from percolate production at the same landfill after closure. Furthermore, plantation of willow on top of closed sections can increase the evapotranspiration rate thereby reducing percolate production rates by up to 47% compared to a grass cover. This process, however, depends upon the availability of water in the top layer, and so the evaporation rate will be less than optimal during the summer where soil-water contents in the top cover are low.

Medication persistence and the use of generic and brand-name blood pressure-lowering agents.

PubMed

Corrao, Giovanni; Soranna, Davide; La Vecchia, Carlo; Catapano, Alberico; Agabiti-Rosei, Enrico; Gensini, Gianfranco; Merlino, Luca; Mancia, Giuseppe

2014-05-01

Because of their lower cost, healthcare systems recommend physicians to prefer generic products, rather than brand-name medicaments. There is then considerable interest and debate concerning safety and effectiveness of generic products. Few studies have compared patients treated with brand-name and generic drugs for adherence to treatment, with somewhat inconsistent results. The primary objective of this study was to compare the risk of discontinuing antihypertensive drug therapy in patients treated with generic or brand-name agents. The 101,618 beneficiaries of the Healthcare system of Lombardy, Italy, aged 18 years or older who were newly treated on monotherapy with antihypertensive generic or brand-name drugs during 2008, were followed until the earliest date among those of the occurrence of treatment discontinuation to whatever antihypertensive drug therapy (outcome), or censoring (death, emigration, 12 months after treatment initiation). Hazard ratios of discontinuation associated with starting on generic or brand-name products (intention-to-treat analysis), and incidence rate ratio of discontinuation during periods on generic and brand-name products (as-treated analysis) were respectively estimated from a cohort and self-controlled case series analyses. Patients who started on generics did not experience a different risk of discontinuation compared with those starting on brand-name agents (hazard ratio: 1.00; 95% confidence interval 0.98-1.02). Discontinuation did not occur with different rates during periods covered by generics or brand-name agents (incidence rate ratio: 1.01; 95% confidence interval 0.96-1.11) within the same individuals. A number of sensitivity and subgroup analyses confirmed the robustness of these findings. Generic products are not responsible for the high rate of discontinuation from antihypertensive drug therapy. Assuming therapeutic equivalence, clinical implication is of prescribing generic drug therapies.

Double product and end-organ damage in African and Caucasian men: the SABPA study.

PubMed

Schultz, A J; Schutte, A E; Schutte, R

2013-08-10

Increasing urbanisation in sub-Saharan African countries is causing a rapid increase in cardiovascular disease. Evidence suggests that Africans have higher blood pressures and a higher prevalence of hypertension-related cardiovascular morbidity and mortality, compared to Caucasians. We investigated double product (systolic blood pressure × heart rate), a substantial measure of cardiac workload, as a possible cardiovascular risk factor in African and Caucasian men. The study consisted of 101 urbanised African and 101 Caucasian male school teachers. We measured 24h ambulatory blood pressure and the carotid cross-sectional wall area, and determined left ventricular hypertrophy electrocardiographically by means of the Cornell product. Urinary albumin and creatinine were analysed to obtain the albumin-to-creatinine ratio. Africans had higher 24h, daytime and nighttime systolic- and diastolic blood pressure, heart rate and resultant double product compared to the Caucasians. In addition, markers of end-organ damage, albumin-to-creatinine ratio and left ventricular hypertrophy were higher in the Africans while cross-sectional wall area did not differ. In Africans after single partial and multiple regression analysis, 24h systolic blood pressure, but not double product or heart rate, correlated positively with markers of end-organ damage (cross-sectional wall area: β=0.398, P=0.005; left ventricular hypertrophy: β=0.455, P<0.001; albumin-to-creatinine ratio: β=0.280, P=0.012). No associations were evident in Caucasian men. Double product may not be a good marker of increased cardiovascular risk when compared to systolic blood pressure in African and Caucasian men. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Fermentation of Acid-pretreated Corn Stover to Ethanol Without Detoxification Using Pichia stipitis

NASA Astrophysics Data System (ADS)

Agbogbo, Frank K.; Haagensen, Frank D.; Milam, David; Wenger, Kevin S.

In this work, the effect of adaptation on P. stipitis fermentation using acidpretreated corn stover hydrolyzates without detoxification was examined. Two different types of adaptation were employed, liquid hydrolyzate and solid state agar adaptation. Fermentation of 12.5% total solids undetoxified acid-pretreated corn stover was performed in shake flasks at different rotation speeds. At low rotation speed (100 rpm), both liquid hydrolyzate and solid agar adaptation highly improved the sugar consumption rate as well as ethanol production rate compared to the wild-type strains. The fermentation rate was higher for solid agar-adapted strains compared to liquid hydrolyzate-adapted strains. At a higher rotation speed (150 rpm), there was a faster sugar consumption and ethanol production for both the liquid-adapted and the wild-type strains. However, improvements in the fermentation rate between the liquid-adapted and wild strains were less pronounced at the high rotation speed.

Development of a Feedstock-to-Product Chain Model for Densified Biomass Pellets

NASA Astrophysics Data System (ADS)

McPherrin, Daniel

The Q’Pellet is a spherical, torrefied biomass pellet currently under development. It aims to improve on the shortcomings of commercially available cylindrical white and torrefied pellets. A spreadsheet-based model was developed to allow for techno-economic analysis and simplified life cycle analysis of Q’Pellets, torrefied pellets and white pellets. A case study was developed to compare the production of white, torrefied and Q’Pellet production based on their internal rates of return and life cycle greenhouse gas emissions. The case study was based on a commercial scale plant built in Williams Lake BC with product delivery in Rotterdam, Netherlands. Q’Pellets had the highest modelled internal rate of return, at 12.7%, with white pellets at 11.1% and torrefied pellets at 8.0%. The simplified life cycle analysis showed that Q’Pellets had the lowest life cycle greenhouse gas emissions of the three products, 6.96 kgCO2eq/GJ, compared to 21.50 kgCO2eq/GJ for white pellets and 10.08 kgCO2eq/GJ for torrefied pellets. At these levels of life cycle greenhouse gas emissions, white pellets are above the maximum life cycle emissions to be considered sustainable under EU regulations. Sensitivity analysis was performed on the model by modifying input variables, and showed that white pellets are more sensitive to uncontrollable market variables, especially pellet sale prices, raw biomass prices and transportation costs. Monte Carlo analysis was also performed, which showed that white pellet production is less predictable and more likely to lead to a negative internal rate of return compared to Q’Pellet production.

Advanced glycation end-products as markers of aging and longevity in the long-lived Ansell's mole-rat (Fukomys anselli).

PubMed

Dammann, Philip; Sell, David R; Begall, Sabine; Strauch, Christopher; Monnier, Vincent M

2012-06-01

Mole-rat of the genus Fukomys are mammals whose life span is strongly influenced by reproductive status with breeders far outliving nonbreeders. This raises the important question of whether increased longevity of the breeders is reflected in atypical expression of biochemical markers of aging. Here, we measured markers of glycation and advanced glycation end-products formed in insoluble skin collagen of Ansell's mole-rat Fukomys anselli as a function of age and breeding status. Glucosepane, pentosidine, and total advanced glycation end-product content significantly increased with age after correction for breeder status and sex. Unexpectedly, total advanced glycation end-products, glucosepane, and carboxymethyl-lysine (CML) were significantly higher in breeders versus nonbreeders suggesting that breeders have evolved powerful defenses against combined oxidant and carbonyl stress compared with nonbreeders. Most interestingly, when compared with other mammals, pentosidine formation rate was lower in mole-rat compared with other short-lived rodents confirming previous observations of an inverse relationship between longevity and pentosidine formation rates in skin collagen.

Advanced Glycation End-Products as Markers of Aging and Longevity in the Long-Lived Ansell’s Mole-Rat (Fukomys anselli)

PubMed Central

Dammann, Philip; Begall, Sabine; Strauch, Christopher; Monnier, Vincent M.

2012-01-01

Mole-rat of the genus Fukomys are mammals whose life span is strongly influenced by reproductive status with breeders far outliving nonbreeders. This raises the important question of whether increased longevity of the breeders is reflected in atypical expression of biochemical markers of aging. Here, we measured markers of glycation and advanced glycation end-products formed in insoluble skin collagen of Ansell’s mole-rat Fukomys anselli as a function of age and breeding status. Glucosepane, pentosidine, and total advanced glycation end-product content significantly increased with age after correction for breeder status and sex. Unexpectedly, total advanced glycation end-products, glucosepane, and carboxymethyl-lysine (CML) were significantly higher in breeders versus nonbreeders suggesting that breeders have evolved powerful defenses against combined oxidant and carbonyl stress compared with nonbreeders. Most interestingly, when compared with other mammals, pentosidine formation rate was lower in mole-rat compared with other short-lived rodents confirming previous observations of an inverse relationship between longevity and pentosidine formation rates in skin collagen. PMID:22156473

Pre-separation of ammonium content during high solid thermal-alkaline pretreatment to mitigate ammonia inhibition: Kinetics and feasibility analysis.

PubMed

Zhuo, Yang; Han, Yun; Qu, Qiliang; Cao, Yuqin; Peng, Dangcong; Li, Yuyou

2018-08-01

The feasibility of ammonia pre-separation during the thermal-alkaline pretreatment (TAP) of waste activated sludge was evaluated to mitigate ammonia inhibition during high solid anaerobic digestion (HSAD). The results showed that the TAP increased the organics hydrolysis rate as much as 77% compared to the thermal hydrolysis pretreatment (THP). The production and separation of the ammonia during the TAP exhibited a linear relationship with the hydrolysis of organics and the Emerson model. The pre-separation ratio of the free ammonia nitrogen exceeded 98.00% at a lime dosage exceeding 0.021 g CaO/g TS. However, the separation ratio of the total ammonia nitrogen (TAN) was hindered by its production ratio. Compared to the THP, the TAP increased the methane production rate under similar production yield. A mass flow analysis indicated that the TAP-HSAD process reduced the volume of the digester compared to the THP-HSAD process and the recirculated HSAD-TAP process recovered 45% of the nitrogen in the waste activated sludge. Copyright © 2018 Elsevier Ltd. All rights reserved.

High activity of mitochondrial glycerophosphate dehydrogenase and glycerophosphate-dependent ROS production in prostate cancer cell lines.

PubMed

Chowdhury, Subir K R; Gemin, Adam; Singh, Gurmit

2005-08-12

Most malignant cells are highly glycolytic and produce high levels of reactive oxygen species (ROS) compared to normal cells. Mitochondrial glycerophosphate dehydrogenase (mGPDH) participates in the reoxidation of cytosolic NADH by delivering reducing equivalents from this molecule into the electron transport chain, thus sustaining glycolysis. Here, we investigate the role of mGPDH in maintaining an increased rate of glycolysis and evaluate glycerophosphate-dependent ROS production in prostate cancer cell lines (LNCaP, DU145, PC3, and CL1). Immunoblot, polarographic, and spectrophotometric analyses revealed that mGPDH abundance and activity was significantly elevated in prostate cancer cell lines when compared to the normal prostate epithelial cell line PNT1A. Furthermore, both the glycolytic capacity and glycerophosphate-dependent ROS production was increased 1.68- to 4.44-fold and 5- to 7-fold, respectively, in prostate cancer cell lines when compared to PNT1A cells. Overall, these data demonstrate that mGPDH is involved in maintaining a high rate of glycolysis and is an important site of electron leakage leading to ROS production in prostate cancer cells.

Growth and Mortality of Coccolithophores during spring in the Celtic Sea

NASA Astrophysics Data System (ADS)

Mayers, K.; Poulton, A. J.; Giering, S. L. C.; Daniels, C. J.; Wells, S. R.; Tarran, G.

2016-02-01

Coccolithophores are an important group of single celled protists which dominate pelagic calcite production, however little is currently known about the mortality rates within this group, or their importance in shelf seas regarding productivity and nutrient recycling. Measurements of coccolithophore calcification and cellular calcite quotas, as well as dilution experiments for microzooplankton grazing rates, were made during a spring cruise (April, 2015) in the Celtic Sea (NW European Shelf) and within an April bloom of Emiliania huxleyi. Calcite production and coccolithophore cell numbers showed a general positive trend throughout the progression of the spring bloom, ranging from 15 - 34µmol C m-3d-1 and 6 - 94 cells ml-1. Cell normalised calcification rates declined from 3 - 0.6 pmol C cell-1d-1 due to a shift from a mixed community to an E. huxleyi dominated one. Within the E. huxleyi bloom we recorded high daily calcite production (6049 µmol C m-3d-1) and cell normalised calcification of 3 pmol C cell-1d-1. This is significantly higher than E. huxleyi dominated sites in the Iceland Basin and more similar to a bloom on the Patagonian Shelf. Within the E. huxleyi bloom, mortality rates were 0.23 d-1 compared with growth rates of 0.29 d-1, meaning 80% of daily calcification was removed by grazers. In this study, coccolithophore mortality rates are presented from the central Celtic Sea throughout spring, and compared with an April E. huxleyi bloom in terms of species composition, trends in calcite production and composition of the phytoplankton community. These observations will potentially elucidate the role grazing plays in the fate of calcium carbonate, bloom formation and community composition.

Shell productivity of the large benthic foraminifer Baculogypsina sphaerulata, based on the population dynamics in a tropical reef environment

NASA Astrophysics Data System (ADS)

Fujita, Kazuhiko; Otomaru, Maki; Lopati, Paeniu; Hosono, Takashi; Kayanne, Hajime

2016-03-01

Carbonate production by large benthic foraminifers is sometimes comparable to that of corals and coralline algae, and contributes to sedimentation on reef islands and beaches in the tropical Pacific. Population dynamic data, such as population density and size structure (size-frequency distribution), are vital for an accurate estimation of shell production of foraminifers. However, previous production estimates in tropical environments were based on a limited sampling period with no consideration of seasonality. In addition, no comparisons were made of various estimation methods to determine more accurate estimates. Here we present the annual gross shell production rate of Baculogypsina sphaerulata, estimated based on population dynamics studied over a 2-yr period on an ocean reef flat of Funafuti Atoll (Tuvalu, tropical South Pacific). The population density of B. sphaerulata increased from January to March, when northwest winds predominated and the study site was on the leeward side of reef islands, compared to other seasons when southeast trade winds predominated and the study site was on the windward side. This result suggested that wind-driven flows controlled the population density at the study site. The B. sphaerulata population had a relatively stationary size-frequency distribution throughout the study period, indicating no definite intensive reproductive period in the tropical population. Four methods were applied to estimate the annual gross shell production rates of B. sphaerulata. The production rates estimated by three of the four methods (using monthly biomass, life tables and growth increment rates) were in the order of hundreds of g CaCO3 m-2 yr-1 or cm-3 m-2 yr-1, and the simple method using turnover rates overestimated the values. This study suggests that seasonal surveys should be undertaken of population density and size structure as these can produce more accurate estimates of shell productivity of large benthic foraminifers.

100 years of microbial electricity production: three concepts for the future

PubMed Central

Arends, Jan B. A.; Verstraete, Willy

2012-01-01

Summary Bioelectrochemical systems (BES) have been explored according to three main concepts: to produce energy from organic substrates, to generate products and to provide specific environmental services. In this work, by using an engineering approach, biological conversion rates are calculated for BES resp. anaerobic digestion. These rates are compared with currents produced by chemical batteries and chemical fuel cells in order to position BES in the ‘energy’‐market. To evaluate the potential of generating various products, the biochemistry behind the biological conversion rates is examined in relation to terminal electron transfer molecules. By comparing kinetics rather than thermodynamics, more insight is gained in the biological bottlenecks that hamper a BES. The short‐term future for BES research and its possible application is situated in smart niches in sustainable environmental development, i.e. in processes where no large currents or investment cost intensive reactors are needed to obtain the desired results. Some specific examples are identified. PMID:21958308

Quantification of Viral and Prokaryotic Production Rates in Benthic Ecosystems: A Methods Comparison

PubMed Central

Rastelli, Eugenio; Dell’Anno, Antonio; Corinaldesi, Cinzia; Middelboe, Mathias; Noble, Rachel T.; Danovaro, Roberto

2016-01-01

Viruses profoundly influence benthic marine ecosystems by infecting and subsequently killing their prokaryotic hosts, thereby impacting the cycling of carbon and nutrients. Previously conducted studies, based on different methodologies, have provided widely differing estimates of the relevance of viruses on benthic prokaryotes. There has been no attempt so far to compare these independent approaches, including contextual comparisons among different approaches for sample manipulation (i.e., dilution or not of the sediments during incubations), between methods based on epifluorescence microscopy (EFM) or radiotracers, and between the use of different radiotracers. Therefore, it has been difficult to identify the most suitable methodologies and protocols to be used as standard approaches for the quantification of viral infections of prokaryotes. Here, we compared for the first time different methods for determining viral and prokaryotic production rates in marine sediments collected at two benthic sites, differing in depth and environmental conditions. We used a highly replicated experimental design, testing the potential biases associated to the incubation of sediments as diluted or undiluted. In parallel, we also compared EFM counts with the 3H-thymidine incubations for the determination of viral production rates, and the use of 3H-thymidine versus 3H-leucine radiotracers for the determination of prokaryotic production. We show here that, independent from sediment dilution, EFM-based values of viral production ranged from 1.4 to 4.6 × 107 viruses g-1 h-1, and were similar but overall less variable compared to those obtained by the 3H-thymidine method (0.3 to 9.0 × 107 viruses g-1h-1). In addition, the prokaryotic production rates were not affected by sediment dilution, and the use of different radiotracers provided very consistent estimates (10.3–35.1 and 9.3–34.6 ngC g-1h-1 using the 3H-thymidine or 3H-leucine method, respectively). These results indicated that viral lysis was responsible for the abatement of 55–81% of the prokaryotic heterotrophic production, corroborating previous findings of the major role of viruses in benthic deep-sea ecosystems. Moreover, our methodological comparison for the analysis of viral production in marine sediments suggests that microscopy-based approaches are simpler and more cost-effective than those based on radiotracers. These approaches also reduce time to results and overcome issues related to generation of radioactive waste. PMID:27713739

The equivalence of minimum entropy production and maximum thermal efficiency in endoreversible heat engines.

PubMed

Haseli, Y

2016-05-01

The objective of this study is to investigate the thermal efficiency and power production of typical models of endoreversible heat engines at the regime of minimum entropy generation rate. The study considers the Curzon-Ahlborn engine, the Novikov's engine, and the Carnot vapor cycle. The operational regimes at maximum thermal efficiency, maximum power output and minimum entropy production rate are compared for each of these engines. The results reveal that in an endoreversible heat engine, a reduction in entropy production corresponds to an increase in thermal efficiency. The three criteria of minimum entropy production, the maximum thermal efficiency, and the maximum power may become equivalent at the condition of fixed heat input.

Analysis of two production inventory systems with buffer, retrials and different production rates

NASA Astrophysics Data System (ADS)

Jose, K. P.; Nair, Salini S.

2017-09-01

This paper considers the comparison of two ( {s,S} ) production inventory systems with retrials of unsatisfied customers. The time for producing and adding each item to the inventory is exponentially distributed with rate β. However, a production rate α β higher than β is used at the beginning of the production. The higher production rate will reduce customers' loss when inventory level approaches zero. The demand from customers is according to a Poisson process. Service times are exponentially distributed. Upon arrival, the customers enter into a buffer of finite capacity. An arriving customer, who finds the buffer full, moves to an orbit. They can retry from there and inter-retrial times are exponentially distributed. The two models differ in the capacity of the buffer. The aim is to find the minimum value of total cost by varying different parameters and compare the efficiency of the models. The optimum value of α corresponding to minimum total cost is an important evaluation. Matrix analytic method is used to find an algorithmic solution to the problem. We also provide several numerical or graphical illustrations.

Methane production by anaerobic digestion of water hyacinth (Eichhornia crassipes)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klass, D.L.; Ghosh, S.

1980-01-01

Water hyacinth under conventional high-rate digestion conditions exhibited higher methane yields and energy recovery efficiencies when grown in sewage-fed lagoons as compared to the corresponding values obtained with water hyacinth grown in a fresh-water pond. Mesophilic digestion provided the highest feed energy recovered in the product gas as methane while thermophilic digestion, when operated at sufficiently high loading rates and reduced detention times, gave the highest specific methane production rates. Methane yields, volatile solids reduction, and energy recovery as methane for the sewage-grown water hyacinth were in the same range as those observed for other biomass substrates when digested undermore » similar conditions.« less

Cosmogenic Production of Be-7 and Be-10 in Water Targets

NASA Technical Reports Server (NTRS)

Nishiizumi, K.; Finkel, R. C.; Klein, J.; Kohl, C. P.

1996-01-01

We have measured Be-10(t(sub 1/2) = 1.5 x 10(exp 6) years) and Be-7 (t(sub 1/2) = 53.28 days) concentrations in water targets exposed for 1 to 2 years at Echo Lake, Colorado (elevation = 3246 m) and at La Jolla, California (140 m). Neutron monitor data were used to normalize the measured concentrations in order to calculate production rates equivalent to the cosmic ray flux averaged over four solar cycles (43 years). The Be-7 production rates thus obtained correspond to 6.03 +/- 0.07 x 10(exp -6) atom/g.O/s at Echo Lake and 5.06 +/- 0.20 x 10(exp -7) atom/g.O/ s at La Jolla. The Be-10 production rates correspond to 3.14 +/- 0.18 x 10(exp -6) atom/g.O/s at Echo Lake and 2.68 +/- 0.47 x 10(exp -7) atom/g.O/s at La Jolla. When compared with Be-10 production rates determined in Be-10-saturated rocks from the Antarctic and with theoretical calculations based on meteorite and lunar sample data, we find that the million-year average production rate is about 14 - 17% greater than the present production rate averaged over the last four solar cycles. Comparison with production rates determined by measuring glacially polished rocks from the Sierra Nevada in California indicates that average production (based on a revised 13,000-year deglaciation age and a geographic latitude correction) is a about 11% greater than the average over the last four solar cycles. The measured Be-10/Be-7 production ratio in oxygen is 0.52 +/- 0.03 at Echo Lake and 0.55 +/- 0.07 at La Jolla.

Perturbation theory in the catalytic rate constant of the Henri-Michaelis-Menten enzymatic reaction.

PubMed

Bakalis, Evangelos; Kosmas, Marios; Papamichael, Emmanouel M

2012-11-01

The Henry-Michaelis-Menten (HMM) mechanism of enzymatic reaction is studied by means of perturbation theory in the reaction rate constant k (2) of product formation. We present analytical solutions that provide the concentrations of the enzyme (E), the substrate (S), as well as those of the enzyme-substrate complex (C), and the product (P) as functions of time. For k (2) small compared to k (-1), we properly describe the entire enzymatic activity from the beginning of the reaction up to longer times without imposing extra conditions on the initial concentrations E ( o ) and S ( o ), which can be comparable or much different.

Impacts of supplyshed-level differences in productivity and land Costs on the economics of hybrid poplar production in Minnesota, USA

Treesearch

William Lazarus; William L. Headlee; Ronald S. Zalesny

2015-01-01

The joint effects of poplar biomass productivity and land costs on poplar production economics were compared for 12 Minnesota counties and two genetic groups, using a process-based model (3-PG) to estimate productivity. The counties represent three levels of productivity and a range of land costs (annual rental rates) from $128/ha to $534/ha. An optimal rotation age...

Comparative Efficacy of 2 Topical Anesthetics for the Placement of Orthodontic Temporary Anchorage Devices

PubMed Central

Reznik, Derek S; Jeske, Arthur H; Chen, Jung-Wei; English, Jeryl

2009-01-01

This study compared the effectiveness of topical benzocaine 20% versus a combination of lidocaine, tetracaine, and phenylephrine in providing sufficient analgesia for the placement of orthodontic temporary anchorage devices (TADs). The 2 topical anesthetics were tested against each other bilaterally using a randomized, double-blind, crossover design. The agents were left in place for the amount of time prescribed by the manufacturer. The TAD was then placed, and each subject rated the degree of pain on a Heft-Parker visual analogue scale. A pulse oximeter was used to record the preoperative and postoperative pulse rates. Statistically significant differences in perceived pain (P < .05) and success rate (P < .01) between drugs were seen, but no significant difference in pulse rate change between the topical anesthetics was observed (P > .05). It was concluded that when the efficacy of topical benzocaine and of a combination product was compared as the sole anesthetic to facilitate acceptable pain control for placement of orthodontic temporary anchorage devices, the combination product was considerably more efficacious. PMID:19769421

Effects of oxygen supply on the biodegradation rate in oil hydrocarbons contaminated soil

NASA Astrophysics Data System (ADS)

Zawierucha, I.; Malina, G.

2011-04-01

Respirometry studies using the 10-chamber Micro-Oxymax respirometer (Columbus, Ohio) were conducted to determine the effect of biostimulation (by diverse ways of O2 supply) on enhancing biodegradation in soils contaminated with oil hydrocarbons. Soil was collected from a former military airport in Kluczewo, Poland. Oxygen was supplied by means of aerated water, aqueous solutions of H2O2 and KMnO4. The biodegradation was evaluated on the basis of O2 uptake and CO2 production. The O2 consumption and CO2 production rates during hydrocarbons biodegradation were estimated from the slopes of cumulative curve linear regressions. The pertinent intrinsic and enhanced biodegradation rates were calculated on the basis of mass balance equation and O2 uptake and CO2 production rates. The biodegradation rates of 5-7 times higher as compared to a control were observed when the aqueous solution of KMnO4 in concentration of 20 g L-1 was applied. Permanganate is known to readily oxidize alkene carbon - carbon double bonds; so it can be successfully applied in remediation technology for soils contaminated with oil hydrocarbons. While hydrocarbons are not completely mineralized by permanganate oxidation reactions, their structure is altered by polar functional groups providing vast improvements in aqueous solubility and availability for biodegradation. The 3% aqueous solution of H2O2 caused significant improvement of the biodegradation rates as compared to a control (on average about 260%). Aerobic biodegradation of hydrocarbons can benefit from the presence of oxygen released during H2O2 decomposition. Adding of aerated water resulted in an increase of biodegradation rates (about 114 - 229%) as compared to a control. The aerated water can both be the source of oxygen for microorganisms and determine the transport of substrate to bacteria cells.

Eucalyptus kraft black liquor enhances growth and productivity of Spirulina in outdoor cultures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chauhan, V.S.; Singh, G.; Ramamurthy, V.

1995-07-01

Mass cultivation of microalgae for commercial applications suffers from poor productivities when measured against laboratory results or theoretical projections. In an effort to reduce this gap it was discovered that addition of eucalyptus kraft black liquor (BL) enhanced biomass productivity in outdoor cultures of Spirulina by increasing growth rate by 38% and biomass yield by 43%. BL treatment resulted in elevation of nitrogen assimilating enzyme activities and efficiency of phosphate utilization. Analyses of forenoon and afternoon oxygen production rates (OPRs) indicated higher photosynthetic and respiratory activity in BL-treated cultures compared to untreated cultures. 20 refs., 1 fig., 2 tabs.

High Acetic Acid Production Rate Obtained by Microbial Electrosynthesis from Carbon Dioxide.

PubMed

Jourdin, Ludovic; Grieger, Timothy; Monetti, Juliette; Flexer, Victoria; Freguia, Stefano; Lu, Yang; Chen, Jun; Romano, Mark; Wallace, Gordon G; Keller, Jurg

2015-11-17

High product specificity and production rate are regarded as key success parameters for large-scale applicability of a (bio)chemical reaction technology. Here, we report a significant performance enhancement in acetate formation from CO2, reaching comparable productivity levels as in industrial fermentation processes (volumetric production rate and product yield). A biocathode current density of -102 ± 1 A m(-2) and an acetic acid production rate of 685 ± 30 (g m(-2) day(-1)) have been achieved in this study. High recoveries of 94 ± 2% of the CO2 supplied as the sole carbon source and 100 ± 4% of electrons into the final product (acetic acid) were achieved after development of a mature biofilm, reaching an elevated product titer of up to 11 g L(-1). This high product specificity is remarkable for mixed microbial cultures, which would make the product downstream processing easier and the technology more attractive. This performance enhancement was enabled through the combination of a well-acclimatized and enriched microbial culture (very fast start-up after culture transfer), coupled with the use of a newly synthesized electrode material, EPD-3D. The throwing power of the electrophoretic deposition technique, a method suitable for large-scale production, was harnessed to form multiwalled carbon nanotube coatings onto reticulated vitreous carbon to generate a hierarchical porous structure.

Amino acid and N mineralization dynamics in heathland soil after long-term warming and repetitive drought

NASA Astrophysics Data System (ADS)

Andresen, L. C.; Bode, S.; Tietema, A.; Boeckx, P.; Rütting, T.

2015-04-01

Monomeric organic nitrogen (N) compounds such as free amino acids (FAAs) are an important resource for both plants and soil microorganisms and a source of ammonium (NH4+) via microbial FAA mineralization. We compared gross FAA dynamics with gross N mineralization in a Dutch heathland soil using a 15N tracing technique. A special focus was made on the effects of climate change factors warming and drought, followed by rewetting. Our aims were to (1) compare FAA mineralization (NH4+ production from FAAs) with gross N mineralization, (2) assess gross FAA production rate (depolymerization) and turnover time relative to gross N mineralization rate, and (3) assess the effects of a 14 years of warming and drought treatment on these rates. The turnover of FAA in the soil was ca. 3 h, which is almost 2 orders of magnitude faster than that of NH4+ (i.e. ca. 4 days). This suggests that FAA is an extensively used resource by soil microorganisms. In control soil (i.e. no climatic treatment), the gross N mineralization rate (10 ± 2.9 μg N g-1 day-1) was 8 times smaller than the total gross FAA production rate of five AAs (alanine, valine, leucine, isoleucine, proline: 127.4 to 25.0 μg N g-1 day-1). Gross FAA mineralization (3.4 ± 0.2 μg N g-1 day-1) contributed 34% to the gross N mineralization rate and is therefore an important component of N mineralization. In the drought treatment, a 6-29% reduction in annual precipitation caused a decrease of gross FAA production by 65% and of gross FAA mineralization by 41% compared to control. On the other hand, gross N mineralization was unaffected by drought, indicating an increased mineralization of other soil organic nitrogen (SON) components. A 0.5-1.5 °C warming did not significantly affect N transformations, even though gross FAA production declined. Overall our results suggest that in heathland soil exposed to droughts a different type of SON pool is mineralized. Furthermore, compared to agricultural soils, FAA mineralization was relatively less important in the investigated heathland. This indicates more complex mineralization dynamics in semi-natural ecosystems.

Amino acid and N mineralization dynamics in heathland soil after long-term warming and repetitive drought

NASA Astrophysics Data System (ADS)

Andresen, L. C.; Bode, S.; Tietema, A.; Boeckx, P.; Rütting, T.

2014-11-01

Monomeric organic nitrogen (N) such as free amino acids (fAA) is an important resource for both plants and soil microorganisms and is, furthermore, a source of ammonium (NH4+) via microbial fAA mineralization. We compared gross fAA dynamics with gross N mineralization in a Dutch heathland soil using 15N labelling. A special focus was made on the effects of climate change factors warming and drought, followed by rewetting. Our aims were to: (1) compare fAA mineralization (NH4+ production from fAAs) with gross N mineralization, (2) assess gross fAA production rate (depolymerization) and turnover time relative to gross N mineralization rate, and (3) assess the effects of warming and drought on these rates. The turnover of fAA in the soil was ca. 3 h, which is almost two orders of magnitude faster than that of NH4+ (i.e. ca. 4 days). This suggests that fAAs is an extensively used resource by soil microorganisms. In control soil (i.e. no climatic treatment), the gross N mineralization rate (10 ± 2.9 μg N g-1 day-1) was eight-times smaller than the summed gross fAA production rate of five AAs (alanine, valine, leucine, isoleucine, proline: 127.4 to 25.0 μg N g-1 day-1). Gross fAA mineralization (3.4 ± 0.2 μg N g-1 day-1) contributed by 34% to the gross N mineralization rate and is, thus, an important component of N mineralization. In the drought treatment, gross fAA production was reduced by 65% and gross fAA mineralization by 41%, compared to control. On the other hand, gross N mineralization was unaffected by drought, indicating an increased mineralization of other soil organic nitrogen (SON) components. Warming did not significantly affect N transformations, even though that gross fAA production was more than halved. Overall our results suggest that heathland soil exposed to droughts has a shift in the composition of the SON being mineralized. Furthermore, compared to agricultural soils, fAA mineralization was relatively less important in the investigated heathland. This indicates a more complex mineralization dynamics in semi-natural ecosystems.

[Productive social activities in mothers of intellectually disabled children moderate the relationship between caregiver burden and self-rated health].

PubMed

Yatsugi, Sawa; Suzukamo, Yoshimi; Izumi, Sinichi

2013-07-01

Recently, the length of time for which intellectually disabled children receive homecare has increased; hence, the mothers caring for these intellectually disabled children at home are being exposed to increasingly heavy caregiver burden. Previous studies have reported that negative psychological states, including caregiver burden, influence self-rated health status; however, when elderly people engaged in productive social activities, they experienced heightened positive psychological states. Therefore, the objective of this study was to investigate whether mothers' participation in productive social activities influenced the relationship between caregiver burden and self-rated health status. We performed a cross-sectional study using a questionnaire that included items on self-rated health, the modified Japanese version of the Zarit Caregiver Burden Interview, productive social activities, and various confounding variables. We sent the questionnaires to 270 mothers belonging to patient and family advocacy groups. We then compared the self-rated health and caregiver burden between a group of mothers involved in productive social activities and a group not involved in such activities. The relationships between self-rated health, caregiver burden, and productive social activities were analyzed using analysis of variance (ANOVA) and post-hoc testing. We obtained 120 valid responses. Mothers with greater burden had worse self-rated health than the other group (r=-0.305). According to the ANOVA results, the self-rated health of mothers involved in productive social activities did not significantly differ between caregiver burden groups (mild burden group: 3.4 vs. severe burden group: 3.12; F=1.3, P=.253), whereas the self-rated health of mothers without productive social activities showed a significant difference between caregiver burden groups (mild burden group: 3.4 vs. severe burden group: 2.7; F=5.6, P=.017). Mothers with greater burden had worse self-rated health. However, in mothers who were engaged in productive social activities, self-rated health did not differ between the mild burden and severe burden groups. Therefore, productive social activities can favorably moderate the relationship between caregiver burden and self-rated health.

Internal cycle modeling and environmental assessment of multiple cycle consumer products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsiliyannis, C.A., E-mail: anion@otenet.gr

2012-01-15

Highlights: Black-Right-Pointing-Pointer Dynamic flow models are presented for remanufactured, reused or recycled products. Black-Right-Pointing-Pointer Early loss and stochastic return are included for fast and slow cycling products. Black-Right-Pointing-Pointer The reuse-to-input flow ratio (Internal Cycle Factor, ICF) is determined. Black-Right-Pointing-Pointer The cycle rate, which is increasing with the ICF, monitors eco-performance. Black-Right-Pointing-Pointer Early internal cycle losses diminish the ICF, the cycle rate and performance. - Abstract: Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast andmore » slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying reachable and efficient reuse/recycle targets for consumer products and in planning return via appropriate labelling and digital coding for enhancing environmental performance, while satisfying consumer demand.« less

Methane production from bicarbonate and acetate in an anoxic marine sediment

NASA Technical Reports Server (NTRS)

Crill, P. M.; Martens, C. S.

1986-01-01

Methane production from C-14 labeled bicarbonate and acetate was measured over the top 28 cm of anoxic Cape Lookout Bight sediments during the summer of 1983. The depth distribution and magnitude of summed radioisotopically determined rates compare well with previous measurements of total methane production and the sediment-water methane flux. Methane production from CO2 reduction and acetate fermentation accounts for greater than 80 percent of the total production rate and sediment-water flux. Methane production from bicarbonate was found to occur in all depth intervals sampled except those in the top 2 cm, whereas significant methane production from acetate only occurred at depths below 10 cm where sulfate was exhausted. Acetate provided 20 to 29 percent of the measured methane production integrated over the top 30 cm of the sediments.

Spatial Variability in Biodegradation Rates as Evidenced by Methane Production from an Aquifer

PubMed Central

Adrian, Neal R.; Robinson, Joseph A.; Suflita, Joseph M.

1994-01-01

Accurate predictions of carbon and energy cycling rates in the environment depend on sampling frequencies and on the spatial variability associated with biological activities. We examined the variability associated with anaerobic biodegradation rates at two sites in an alluvial sand aquifer polluted by municipal landfill leachate. In situ rates of methane production were measured for almost a year, using anaerobic wells installed at two sites. Methane production ranged from 0 to 560 μmol · m-2 · day-1 at one site (A), while a range of 0 to 120,000 μmol · m-2 · day-1 was measured at site B. The mean and standard deviations associated with methane production at site A were 17 and 57 μmol · m-2 · day-1, respectively. The comparable summary statistics for site B were 2,000 and 9,900 μmol · m-2 · day-1. The coefficients of variation at sites A and B were 340 and 490%, respectively. Despite these differences, the two sites had similar seasonal trends, with the maximal rate of methane production occurring in summer. However, the relative variability associated with the seasonal rates changed very little. Our results suggest that (i) two spatially distinct sites exist in the aquifer, (ii) methanogenesis is a highly variable process, (iii) the coefficient of variation varied little with the rate of methane production, and (iv) in situ anaerobic biodegradation rates are lognormally distributed. PMID:16349410

Cost comparisons for three harvesting systems operating in northern hardwood stands

Treesearch

Chris B. LeDoux; Neil K. Huyler

2000-01-01

Production rates, break-even piece (tree) sizes/costs (BEP), and operating costs were compared for a Koller K-300 cable yarder, a cut-to-length (CTL) harvester, and an A60F Holder tractor operating at three machine utilization rates (MUR) in northern hardwood stands. At an average product price of $0.40/ft3, the BEP size at an MUR of 90 was 7.64 ft3 for the Koller...

Internal cycle modeling and environmental assessment of multiple cycle consumer products.

PubMed

Tsiliyannis, C A

2012-01-01

Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast and slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying reachable and efficient reuse/recycle targets for consumer products and in planning return via appropriate labelling and digital coding for enhancing environmental performance, while satisfying consumer demand. Copyright © 2011 Elsevier Ltd. All rights reserved.

Electron-capture Rates for pf-shell Nuclei in Stellar Environments and Nucleosynthesis

NASA Astrophysics Data System (ADS)

Suzuki, Toshio; Honma, Michio; Mori, Kanji; Famiano, Michael A.; Kajino, Toshitaka; Hidakai, Jun; Otsuka, Takaharu

Gamow-Teller strengths in pf-shell nuclei obtained by a new shell-model Hamltonian, GXPF1J, are used to evaluate electron-capture rates in pf-shell nuclei at stellar environments. The nuclear weak rates with GXPF1J, which are generally smaller than previous evaluations for proton-rich nuclei, are applied to nucleosynthesis in type Ia supernova explosions. The updated rates are found to lead to less production of neutron-rich nuclei such as 58Ni and 54Cr, thus toward a solution of the problem of over-production of neutron-rich isotopes of iron-group nuclei compared to the solar abundance.

Community metabolism during early development of a restored wetland

USGS Publications Warehouse

McKenna, J.E.

2003-01-01

Productivity is an important ecological function of any natural system and may be quite high in wetlands. Restoration of productive wetlands may play a key role in re-establishing ecological function to portions of the vast areas of wetlands (roughly 86%) drained and otherwise altered in the United States over the past two centuries. A restored wetland at the Montezuma National Wildlife Refuge (upstate New York, USA) was examined to determine if ecological function (i.e., productivity), as well as biotic structure, was restored. Physicochemical conditions and both aquatic and terrestrial productivity were measured at the restoration site and compared with rates and conditions in a reference wetland. Gross aquatic community production rates (based on diurnal oxygen curves) were similar at each site (1,679 and 2,311 g O2 · m−2 · yr−1) and within the range expected for the habitat. Terrestrial Net Aboveground Primary Production rates (measured by monthly biomass changes) (2,400 and 2,500 g dry wt. · m−2 · yr−1) were also similar between sites when tree and herb production were combined. Aquatic respiration rates (3,704 and 4,552 g O2 · m−2· yr−1) were also similar but high, typically more than twice as large as gross aquatic production. As a result, net aquatic production rates at both sites were usually negative, indicating that these small wetlands are organic matter sinks that satisfy aquatic respiration by consumption of both autochthonous aquatic production and imported terrestrial production. They enhance diversity of the local landscape by producing populations of aquatic consumers that cannot be supported by aquatic production alone. Typical wetland conditions and processes developed quickly after restoration, but differences in biotic community structure indicate that observed rates of production and respiration at both sites were maintained by flow through different foodweb pathways. Despite the relatively high process rates, and successional progress of the restoration site is expected to be slow.

TA [2] Continuous, regional methane emissions estimates in northern Pennsylvania gas fields using atmospheric inversions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lauvaux, Thomas

Natural Gas (NG) production activities in the northeastern Marcellus shale have significantly increased in the last decade, possibly releasing large amounts of methane (CH 4) into the atmosphere from the operations at the productions sites and during the processing and transmission steps of the natural gas chain. Based on an intensive aircraft survey, leakage rates from the NG production were quantified in May 2015 and found to be in the order of 0.5% of the total production, higher than reported by the Environmental Protection Agency (EPA) but below the usually observed leakage rates over the shale gases in the US.more » Thanks to the high production rates on average at each well, leakage rates normalized by production appeared to be low in the northeastern Marcellus shale. This result confirms that natural gas production using unconventional techniques in this region is emitting relatively less CH 4 into the atmosphere than other shale reservoirs. The low emissions rate can be explained in part by the high productivity of wells drilled across the northeastern Marcellus region. We demonstrated here that atmospheric monitoring techniques can provide an independent quantification of NG leakage rates using aircraft measurements. The CH 4 analyzers were successfully calibrated at four sites across the region, measuring continuously the atmospheric CH 4 mixing ratios and isotopic 13Ch 4. Our preliminary findings confirm the low leakage rates from tower data collected over September 2015 to November 2016 compared to the aircraft mass-balance estimates in may 2015. However, several episodes revealing large releases of natural gas over several weeks showed that temporal variations in the emissions of CH 4 may increase the actual leakage rate over longer time periods.« less

Effects of nutrient content claims, sports celebrity endorsements and premium offers on pre-adolescent children's food preferences: experimental research.

PubMed

Dixon, H; Scully, M; Niven, P; Kelly, B; Chapman, K; Donovan, R; Martin, J; Baur, L A; Crawford, D; Wakefield, M

2014-04-01

To assess pre-adolescent children's responses to common child-oriented front-of-pack food promotions. Between-subjects, web-based experiment with four front-of-pack promotion conditions on energy-dense and nutrient-poor (EDNP) foods: no promotion [control]; nutrient content claims; sports celebrity endorsements (male athletes) and premium offers. Participants were 1302 grade 5 and 6 children (mean age 11 years) from Melbourne, Australia. Participants chose their preferred product from a randomly assigned EDNP food pack and comparable healthier food pack then completed detailed product ratings. Child-oriented pack designs with colourful, cartooned graphics, fonts and promotions were used. Compared to the control condition, children were more likely to choose EDNP products featuring nutrient content claims (both genders) and sports celebrity endorsements (boys only). Perceptions of nutritional content were enhanced by nutrient content claims. Effects of promotions on some product ratings (but not choice) were negated when children referred to the nutrition information panel. Premium offers did not enhance children's product ratings or choice. Nutrient content claims and sports celebrity endorsements influence pre-adolescent children's preferences towards EDNP food products displaying them. Policy interventions to reduce the impact of unhealthy food marketing to children should limit the use of these promotions. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

Clinical studies of sweat rate reduction by an over-the-counter soft-solid antiperspirant and comparison with a prescription antiperspirant product in male panelists.

PubMed

Swaile, D F; Elstun, L T; Benzing, K W

2012-03-01

Individuals with axillary hyperhidrosis have much higher than average sweat rates and are often prescribed anhydrous aluminum chloride (AlCl(3)) solutions. Topical application of these solutions can be irritating to the skin, resulting in poor compliance and lower than desired efficacy. Demonstrate the efficacy of an over the counter "clinical strength" soft-solid antiperspirant using a night time application regimen and compare to a prescription aluminum chloride (6.5%) antiperspirant using male panelists. Gravimetric hot room efficacy testing (100 F and 35% Humidity) was performed comparing an over the counter soft-solid antiperspirant to placebo in a single test. Two separate gravimetric tests were placed comparing a prescription aluminum chloride (6.5%) antiperspirant to the same soft solid product using an intent to treat model. Skin irritation was assessed daily by a trained grader. Placebo testing resulted in 85% of panelists having a reduction in sweating rate greater than 50%. Comparison testing showed the over the counter soft solid reduced sweat rate by an average of 34% better than the prescription product while resulting significantly less skin irritation. Over the counter "clinical strength" soft-solid antiperspirants can be considered as an alternative treatment to aluminum chloride antiperspirants for the treatment of heavy sweating. © 2012 The Author. BJD © 2012 British Association of Dermatologists.

Use of the cytosensor microphysiometer to predict results of a 21-day cumulative irritation patch test in humans.

PubMed

Landin, Wendell E; Mun, Greg C; Nims, Raymond W; Harbell, John W

2007-09-01

The cytosensor microphysiometer (mu phi) was investigated as a rapid, relatively inexpensive test to predict performance of skin cleansing wipes on the human 21-day cumulative irritation patch test (21CIPT). It indirectly measures metabolic rate changes in L929 cells as a function of test article dose, by measuring the acidification rate in a low-buffer medium. The dose producing a 50% reduction in metabolic rate (MRD50), relative to the baseline rate, is used as a measure of toxicity. The acute toxicity of the mu phi assay can be compared to the chronic toxicity of the 21CIPT, which is based largely on the exposure of test agents to the epidermal cells, resulting in damage and penetration of the stratum corneum leading to cell toxicity. Two series of surfactant-based cleansing wipe products were tested via the mu phi assay and 21CIPT. The first series, consisting of 20 products, was used to determine a prediction model. The second series of 38 products consisted of routine product development formulas or marketed products. Comparing the results from both tests, samples with an MRD50 greater than 50 mg/ml provided a 21CIPT score consistent with a product that performs satisfactorily in the market. When the MRD50 was greater than 78 mg/ml, the 21CIPT score was usually zero. The mu phi may be more sensitive than the 21CIPT for ranking minimally irritating materials. The mu phi assay is useful as a screen for predicting the performance of a wet wipes formula on the 21CIPT, and concurrently reduces the use of animals for safety testing in a product development program for cleansing wipes.

Comparison of two cut-to-length harvesting systems operating in eastern hardwoods

Treesearch

Chris B. LeDoux; Niel K. Huyler

2001-01-01

We compared production rates, operating costs, and break-even points (BEP) for small and large cut-to-length (CTL) harvesting systems operating at several machine utilization rates (MUR) in mixed hardwood and softwood stands in Vermont.

A fuzzy-logic-based model to predict biogas and methane production rates in a pilot-scale mesophilic UASB reactor treating molasses wastewater.

PubMed

Turkdogan-Aydinol, F Ilter; Yetilmezsoy, Kaan

2010-10-15

A MIMO (multiple inputs and multiple outputs) fuzzy-logic-based model was developed to predict biogas and methane production rates in a pilot-scale 90-L mesophilic up-flow anaerobic sludge blanket (UASB) reactor treating molasses wastewater. Five input variables such as volumetric organic loading rate (OLR), volumetric total chemical oxygen demand (TCOD) removal rate (R(V)), influent alkalinity, influent pH and effluent pH were fuzzified by the use of an artificial intelligence-based approach. Trapezoidal membership functions with eight levels were conducted for the fuzzy subsets, and a Mamdani-type fuzzy inference system was used to implement a total of 134 rules in the IF-THEN format. The product (prod) and the centre of gravity (COG, centroid) methods were employed as the inference operator and defuzzification methods, respectively. Fuzzy-logic predicted results were compared with the outputs of two exponential non-linear regression models derived in this study. The UASB reactor showed a remarkable performance on the treatment of molasses wastewater, with an average TCOD removal efficiency of 93 (+/-3)% and an average volumetric TCOD removal rate of 6.87 (+/-3.93) kg TCOD(removed)/m(3)-day, respectively. Findings of this study clearly indicated that, compared to non-linear regression models, the proposed MIMO fuzzy-logic-based model produced smaller deviations and exhibited a superior predictive performance on forecasting of both biogas and methane production rates with satisfactory determination coefficients over 0.98. 2010 Elsevier B.V. All rights reserved.

A rational approach to improving productivity in recombinant Pichia pastoris fermentation.

PubMed

d'Anjou, M C; Daugulis, A J

2001-01-05

A Mut(S) Pichia pastoris strain that had been genetically modified to produce and secrete sea raven antifreeze protein was used as a model system to demonstrate the implementation of a rational, model-based approach to improve process productivity. A set of glycerol/methanol mixed-feed continuous stirred-tank reactor (CSTR) experiments was performed at the 5-L scale to characterize the relationship between the specific growth rate and the cell yield on methanol, the specific methanol consumption rate, the specific recombinant protein formation rate, and the productivity based on secreted protein levels. The range of dilution rates studied was 0. 01 to 0.10 h(-1), and the residual methanol concentration was kept constant at approximately 2 g/L (below the inhibitory level). With the assumption that the cell yield on glycerol was constant, the cell yield on methanol increased from approximately 0.5 to 1.5 over the range studied. A maximum specific methanol consumption rate of 20 mg/g. h was achieved at a dilution rate of 0.06 h(-1). The specific product formation rate and the volumetric productivity based on product continued to increase over the range of dilution rates studied, and the maximum values were 0.06 mg/g. h and 1.7 mg/L. h, respectively. Therefore, no evidence of repression by glycerol was observed over this range, and operating at the highest dilution rate studied maximized productivity. Fed-batch mass balance equations, based on Monod-type kinetics and parameters derived from data collected during the CSTR work, were then used to predict cell growth and recombinant protein production and to develop an exponential feeding strategy using two carbon sources. Two exponential fed-batch fermentations were conducted according to the predicted feeding strategy at specific growth rates of 0.03 h(-1) and 0.07 h(-1) to verify the accuracy of the model. Cell growth was accurately predicted in both fed-batch runs; however, the model underestimated recombinant product concentration. The overall volumetric productivity of both runs was approximately 2.2 mg/L. h, representing a tenfold increase in the productivity compared with a heuristic feeding strategy. Copyright 2001 John Wiley & Sons, Inc.

Negative-hydrogen-ion production from a nanoporous 12CaO • 7Al2O3 electride surface

NASA Astrophysics Data System (ADS)

Sasao, Mamiko; Moussaoui, Roba; Kogut, Dmitry; Ellis, James; Cartry, Gilles; Wada, Motoi; Tsumori, Katsuyoshi; Hosono, Hideo

2018-06-01

A high production rate of negative hydrogen ions (H‑) was observed from a nanoporous 12CaO • 7Al2O3 (C12A7) electride surface immersed in hydrogen/deuterium low-pressure plasmas. The target was negatively biased at 20–130 V, and the target surface was bombarded by H3 + ions from the plasma. The production rate was compared with that from a clean molybdenum surface. Using the pseudo-exponential work-function dependence of the H‑ production rate, the total H‑ yield from the C12A7 electride surface bombarded at 80 V was evaluated to be 25% of that from a cesiated molybdenum surface with the lowest work-function. The measured H‑ energy spectrum indicates that the major production mechanism is desorption by sputtering. This material has potential to be used as a production surface of cesium-free negative ion sources for accelerators, heating beams in nuclear fusion, and surface modification for industrial applications.

Atomic oxygen production scaling in a nanosecond-pulsed externally grounded dielectric barrier plasma jet

NASA Astrophysics Data System (ADS)

Sands, Brian; Schmidt, Jacob; Ganguly, Biswa; Scofield, James

2014-10-01

Atomic oxygen production is studied in a capillary dielectric barrier plasma jet that is externally grounded and driven with a 20-ns risetime positive unipolar pulsed voltage at pulse repetition rates up to 25 kHz. The power coupled to the discharge can be easily increased by increasing the pulse repetition rate. At a critical turnover frequency, determined by the net energy density coupled to the discharge, the plasma chemistry abruptly changes. This is indicated by increased plasma conductance and a transition in reactive oxygen species production from an ozone-dominated production regime below the turnover frequency to atomic-oxygen-dominated production at higher pulse rates. Here, we characterize atomic oxygen production scaling using spatially- and temporally-resolved two-photon absorption laser-induced-fluorescence (TALIF). Quantitative results are obtained via calibration with xenon using a similar laser excitation and collection system. These results are compared with quantitative ozone and discharge power measurements using a helium gas flow with oxygen admixtures up to 3%.

Scholarly Activities of Family Medicine Faculty: Results of a National Survey.

PubMed

Hinojosa, Jose; Benè, Kristen L; Hickey, Colleen; Marvel, Kim

2006-12-01

This survey examined how family medicine residency programs define scholarly activity, the productivity of programs, and perceived barriers to scholarly work. Five types of residency programs are compared: university-based, community-based (unaffiliated, university-affiliated, university-administered), and military. A 13 item web-based questionnaire was sent to all 455 U. S. family medicine residency programs. The survey solicited demographic information as well as program expectations of faculty, presence of a research coordinator/director, activities considered scholarly, productivity, and perceived barriers. A total of 177 surveys were completed for a response rate of 38%, similar to response rates of web-based surveys in the literature. 67.6% of programs encouraged, but did not require scholarly activity, and 44.5% indicated their program had no research coordinator/ director. University-based programs had the highest levels of productivity compared to other program types. Primary barriers to scholarly activity noted were lack of time (73/138, 53%) and lack of supportive infrastructure (37/138, 27%). While interpretations are limited by the response rate of the survey, results provide an increased understanding of how programs define scholarly activity as well as reference points for faculty productivity. This information can help program directors when setting criteria for scholarly work.

Life cycle greenhouse gas impacts of ethanol, biomethane and limonene production from citrus waste

NASA Astrophysics Data System (ADS)

Pourbafrani, Mohammad; McKechnie, Jon; MacLean, Heather L.; Saville, Bradley A.

2013-03-01

The production of biofuel from cellulosic residues can have both environmental and financial benefits. A particular benefit is that it can alleviate competition for land conventionally used for food and feed production. In this research, we investigate greenhouse gas (GHG) emissions associated with the production of ethanol, biomethane, limonene and digestate from citrus waste, a byproduct of the citrus processing industry. The study represents the first life cycle-based evaluations of citrus waste biorefineries. Two biorefinery configurations are studied—a large biorefinery that converts citrus waste into ethanol, biomethane, limonene and digestate, and a small biorefinery that converts citrus waste into biomethane, limonene and digestate. Ethanol is assumed to be used as E85, displacing gasoline as a light-duty vehicle fuel; biomethane displaces natural gas for electricity generation, limonene displaces acetone in solvents, and digestate from the anaerobic digestion process displaces synthetic fertilizer. System expansion and two allocation methods (energy, market value) are considered to determine emissions of co-products. Considerable GHG reductions would be achieved by producing and utilizing the citrus waste-based products in place of the petroleum-based or other non-renewable products. For the large biorefinery, ethanol used as E85 in light-duty vehicles results in a 134% reduction in GHG emissions compared to gasoline-fueled vehicles when applying a system expansion approach. For the small biorefinery, when electricity is generated from biomethane rather than natural gas, GHG emissions are reduced by 77% when applying system expansion. The life cycle GHG emissions vary substantially depending upon biomethane leakage rate, feedstock GHG emissions and the method to determine emissions assigned to co-products. Among the process design parameters, the biomethane leakage rate is critical, and the ethanol produced in the large biorefinery would not meet EISA’s requirements for cellulosic biofuel if the leakage rate is higher than 9.7%. For the small biorefinery, there are no GHG emission benefits in the production of biomethane if the leakage rate is higher than 11.5%. Compared to system expansion, the use of energy and market value allocation methods generally results in higher estimates of GHG emissions for the primary biorefinery products (i.e., smaller reductions in emissions compared to reference systems).

Mapping {sup 15}O Production Rate for Proton Therapy Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grogg, Kira; Alpert, Nathaniel M.; Zhu, Xuping

Purpose: This work was a proof-of-principle study for the evaluation of oxygen-15 ({sup 15}O) production as an imaging target through the use of positron emission tomography (PET), to improve verification of proton treatment plans and to study the effects of perfusion. Methods and Materials: Dynamic PET measurements of irradiation-produced isotopes were made for a phantom and rabbit thigh muscles. The rabbit muscle was irradiated and imaged under both live and dead conditions. A differential equation was fitted to phantom and in vivo data, yielding estimates of {sup 15}O production and clearance rates, which were compared to live versus dead rates formore » the rabbit and to Monte Carlo predictions. Results: PET clearance rates agreed with decay constants of the dominant radionuclide species in 3 different phantom materials. In 2 oxygen-rich materials, the ratio of {sup 15}O production rates agreed with the expected ratio. In the dead rabbit thighs, the dynamic PET concentration histories were accurately described using {sup 15}O decay constant, whereas the live thigh activity decayed faster. Most importantly, the {sup 15}O production rates agreed within 2% (P>.5) between conditions. Conclusions: We developed a new method for quantitative measurement of {sup 15}O production and clearance rates in the period immediately following proton therapy. Measurements in the phantom and rabbits were well described in terms of {sup 15}O production and clearance rates, plus a correction for other isotopes. These proof-of-principle results support the feasibility of detailed verification of proton therapy treatment delivery. In addition, {sup 15}O clearance rates may be useful in monitoring permeability changes due to therapy.« less

Bacterial contamination of ex vivo processed PBPC products under clean room conditions.

PubMed

Ritter, Markus; Schwedler, Joachim; Beyer, Jörg; Movassaghi, Kamran; Mutters, Reinier; Neubauer, Andreas; Schwella, Nimrod

2003-11-01

Patients undergoing high-dose radio- and/or chemotherapy and autologous or allogeneic PBPC transplantation are at high risk for infections owing to profound immunosuppression. In this study, the rate of microbial contamination of ex vivo processed PBPC products was analyzed, comparing preparation under clean room conditions to standard laboratory conditions. After implementation of good manufacturing practice conditions in the two participating institutions, the microbial contamination rate of 366 PBPC harvests from 198 patients was determined under certified clean room conditions (Group A) from 2000 until 2002. To investigate influence of improved environmental conditions along with other parameters, this set of samples was compared with a historical control set of 1413 PBPC products, which have been processed ex vivo under a clean bench in a regular laboratory room and were harvested from 626 patients (Group B) from 1989 until 2000. In Group B microbial contamination was found in 74 PBPC products (5.2%) from 57 patients. In Group A microbial growth was detected in 3 leukapheresis products (0.8%) from 3 patients. After exclusion of PBPC products, which were probably contaminated before manipulation, statistical analysis showed a significant difference (chi2= 10.339; p < 0.001). These data suggest an impact of clean room conditions on the bacterial contamination rate of PBPC products. To identify confounding variables, variables like technique of leukapheresis, culture methodology, and microbial colonization of central venous catheters were taken into account. Further variables might be identified in following studies.

Improving the yield from fermentative hydrogen production.

PubMed

Kraemer, Jeremy T; Bagley, David M

2007-05-01

Efforts to increase H(2) yields from fermentative H(2) production include heat treatment of the inoculum, dissolved gas removal, and varying the organic loading rate. Although heat treatment kills methanogens and selects for spore-forming bacteria, the available evidence indicates H(2) yields are not maximized compared to bromoethanesulfonate, iodopropane, or perchloric acid pre-treatments and spore-forming acetogens are not killed. Operational controls (low pH, short solids retention time) can replace heat treatment. Gas sparging increases H(2) yields compared to un-sparged reactors, but no relationship exists between the sparging rate and H(2) yield. Lower sparging rates may improve the H(2) yield with less energy input and product dilution. The reasons why sparging improves H(2) yields are unknown, but recent measurements of dissolved H(2) concentrations during sparging suggest the assumption of decreased inhibition of the H(2)-producing enzymes is unlikely. Significant disagreement exists over the effect of organic loading rate (OLR); some studies show relatively higher OLRs improve H(2) yield while others show the opposite. Discovering the reasons for higher H(2) yields during dissolved gas removal and changes in OLR will help improve H(2) yields.

29 CFR 525.9 - Criteria for employment of workers with disabilities under certificates at special minimum wage...

Code of Federal Regulations, 2010 CFR

2010-07-01

... relate to the individuals' productivity; (2) The prevailing wages of experienced employees not disabled... at the special minimum wage rate; (3) The productivity of the workers with disabilities compared to... (see § 525.12(h)) or the productivity of experienced nondisabled workers employed in the vicinity on...

Production and survival of elk (Cervus elaphus) calves in Michigan

USGS Publications Warehouse

Bender, L.C.; Carlson, E.; Schmitt, S.M.; Haufler, J.B.

2002-01-01

We determined production and survival of elk (Cervus elaphus nelsoni) calves in Michigan using a variety of methods to index herd productivity. Calf production in Michigan was comparable with the highest rates ever recorded for North American elk. Calf survival averaged 0.90 (SD = 0.05), 0.97 (SD = 0.04) and 0.87 (SD = 0.05) for summer, winter and annually, 1987-1991. Calf survival rates in Michigan were higher than in other North American elk populations. Continued high calf production, in combination with high calf survival, indicates that elk condition is excellent in Michigan, as habitat quality allows cow elk to breed and successfully raise a calf, essentially every year, despite the high energetic demands associated with late gestation and lactation.

Randomized trial of a combination of natural products (cernitin, saw palmetto, B-sitosterol, vitamin E) on symptoms of benign prostatic hyperplasia (BPH).

PubMed

Preuss, H G; Marcusen, C; Regan, J; Klimberg, I W; Welebir, T A; Jones, W A

2001-01-01

Because benign prostatic hyperplasia (BPH) is relatively common, it is important to discover safe and effective means to treat this often debilitating perturbation. Accordingly, we examined the effectiveness of a combination of natural products (cernitin, saw palmetto, B-sitosterol, vitamin E) in treating symptoms of BPH. We undertook a randomized, placebo-controlled, double-blind study. Patients were enrolled from 3 urological practices in the USA. 144 subjects were randomized for study. 17 subjects eventually withdrew, leaving 70 patients in the test group and 57 in the placebo group to complete the study. Inclusion criteria consisted of a diagnosis of BPH, no evidence of cancer, and a maximal urinary flow rate between 5 and 15 ml/second. Patients received either placebo or the combined natural products for 3 months. Evaluations were performed via the American Urological Association (AUA) Symptom Index score, urinary flow rate, PSA measurement, and residual bladder volume. Nocturia showed a markedly significant decrease in severity in patients receiving the combined natural products compared to those taking placebo (p < 0.001). Daytime frequency was also lessened significantly (p < 0.04). When the average individual total AUA Symptom Index score in the test group was compared to that in the placebo group at the end of the study, the difference proved highly significant (p < 0.014). PSA measurements, maximal and average urinary flow rates, and residual volumes showed no statistically significant differences. When taken for 3 months, a combination of natural products (cernitin, saw palmetto, B-sitosterol, vitamin E) compared to placebo can significantly lessen nocturia and frequency and diminish overall symptomatology of BPH as indicated by an improvement in the total AUA Symptom Index score. The combination of natural products caused no significant adverse side effects.

Continuous prophylaxis with recombinant factor IX Fc fusion protein and conventional recombinant factor IX products: comparisons of efficacy and weekly factor consumption.

PubMed

Iorio, Alfonso; Krishnan, Sangeeta; Myrén, Karl-Johan; Lethagen, Stefan; McCormick, Nora; Yermakov, Sander; Karner, Paul

2017-04-01

Continuous prophylaxis for patients with hemophilia B requires frequent injections that are burdensome and that may lead to suboptimal adherence and outcomes. Hence, therapies requiring less-frequent injections are needed. In the absence of head-to-head comparisons, this study compared the first extended-half-life-recombinant factor IX (rFIX) product-recombinant factor IX Fc fusion protein (rFIXFc)-with conventional rFIX products based on annualized bleed rates (ABRs) and factor consumption reported in studies of continuous prophylaxis. This study compared ABRs and weekly factor consumption rates in clinical studies of continuous prophylaxis treatment with rFIXFc and conventional rFIX products (identified by systematic literature review) in previously-treated adolescents and adults with moderate-to-severe hemophilia B. Meta-analysis was used to pool ABRs reported for conventional rFIX products for comparison. Comparisons of weekly factor consumption were based on the mean, reported or estimated from the mean dose per injection. Five conventional rFIX studies (injections 1 to >3 times/week) met the criteria for comparison with once-weekly rFIXFc reported by the B-LONG study. The pooled mean ABR for conventional rFIX was slightly higher than but comparable to rFIXFc (difference=0.71; p = 0.210). Weekly factor consumption was significantly lower with rFIXFc than in conventional rFIX studies (difference in means = 42.8-74.5 IU/kg/week [93-161%], p < 0.001). Comparisons of clinical study results suggest weekly injections with rFIXFc result in similar bleeding rates and significantly lower weekly factor consumption compared with more-frequently-injected conventional rFIX products. The real-world effectiveness of rFIXFc may be higher based on results from a model of the impact of simulated differences in adherence.

Effect of pranayama on rate pressure product in mild hypertensives.

PubMed

Goyal, Rajni; Lata, Hem; Walia, Lily; Narula, Manjit K

2014-07-01

The modern living life-style is known to produce various physical and psychological stresses resulting in increased blood pressure (BP) and heart rate (HR). This can lead to increased myocardial oxygen demand (MVO2). MVO2 correlated best with rate pressure product (RPP). RPP is a product of HR and systolic BP. The present study was conducted to evaluate the effect of relaxation in the form of pranayama on RPP in mild hypertensives. Mild hypertensive patients were divided into two groups. Group A received antihypertensive drugs for 6 weeks and Group B received antihypertensive drugs along with pranayama training for 6 weeks. BP decreased significantly in Group B (148 ± 8.09-127 ± 12.10 mm of Hg) where pranayama was added. The decrease was significant as compared to Group A. HR decreased significantly in both the groups as compared to baseline, however the decrease was similar in both groups. RPP decreased significantly in both groups as compared to baseline, however the decrease was significantly more (P < 0.01) when pranayama was added to antihypertensive drugs (96.73 ± 20.53) when compared to antihypertensive drugs alone (114.66 ± 26.30). The pranayama produces relaxed state and in this state parasympathetic activity overrides sympathetic activity. Hence, addition of pranayama can be a useful addition to antihypertensive drugs for better control of hypertension in mild hypertensives.

Estimation of phytoplankton production from space: current status and future potential of satellite remote sensing.

PubMed

Joint; Groom

2000-07-30

A new generation of ocean colour satellites is now operational, with frequent observation of the global ocean. This paper reviews the potential to estimate marine primary production from satellite images. The procedures involved in retrieving estimates of phytoplankton biomass, as pigment concentrations, are discussed. Algorithms are applied to SeaWiFS ocean colour data to indicate seasonal variations in phytoplankton biomass in the Celtic Sea, on the continental shelf to the south west of the UK. Algorithms to estimate primary production rates from chlorophyll concentration are compared and the advantages and disadvantage discussed. The simplest algorithms utilise correlations between chlorophyll concentration and production rate and one equation is used to estimate daily primary production rates for the western English Channel and Celtic Sea; these estimates compare favourably with published values. Primary production for the central Celtic Sea in the period April to September inclusive is estimated from SeaWiFS data to be 102 gC m(-2) in 1998 and 93 gC m(-2) in 1999; published estimates, based on in situ incubations, are ca. 80 gC m(-2). The satellite data demonstrate large variations in primary production between 1998 and 1999, with a significant increase in late summer in 1998 which did not occur in 1999. Errors are quantified for the estimation of primary production from simple algorithms based on satellite-derived chlorophyll concentration. These data show the potential to obtain better estimates of marine primary production than are possible with ship-based methods, with the ability to detect short-lived phytoplankton blooms. In addition, the potential to estimate new production from satellite data is discussed.

Gender disparities in research productivity among 9952 academic physicians.

PubMed

Eloy, Jean Anderson; Svider, Peter F; Cherla, Deepa V; Diaz, Lucia; Kovalerchik, Olga; Mauro, Kevin M; Baredes, Soly; Chandrasekhar, Sujana S

2013-08-01

The number of women in medicine has increased considerably over the past 3 decades, and they now comprise approximately half of medical school matriculants. We examine whether gender disparities in research productivity are present throughout various specialties and compare these findings to those previously described among otolaryngologists. Bibliometric analysis. Research productivity, measured by the h-index, was calculated for 9,952 academic physicians representing 34 medical specialties. Additionally, trends in how rate of research productivity changed throughout different career stages were compared. Women were underrepresented at the level of professor and in positions of departmental leadership relative to their representation among assistant and associate professors. Male faculty had statistically higher research productivity both overall (H = 10.3 ± 0.14 vs. 5.6 ± 0.14) and at all academic ranks. For the overall sample, men and women appeared to have equivalent rates of research productivity. In internal medicine, men had higher early-career productivity, while female faculty had productivity equaling and even surpassing that of their male colleagues beyond 20 to 25 years. Men and women had equivalent productivity in surgical specialties throughout their careers, and similar rates in pediatrics until 25 to 30 years. Female academic physicians have decreased research productivity relative to men, which may be one factor contributing to their underrepresentation at the level of professor and departmental leader relative to their proportions in junior academic ranks. Potential explanations may include fewer woman physicians in the age groups during which higher academic ranks are attained, greater family responsibilities, and greater involvement in clinical service and educational contributions. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Concentrations and Potential Health Risks of Metals in Lip Products

PubMed Central

Liu, Sa; Rojas-Cheatham, Ann

2013-01-01

Background: Metal content in lip products has been an issue of concern. Objectives: We measured lead and eight other metals in a convenience sample of 32 lip products used by young Asian women in Oakland, California, and assessed potential health risks related to estimated intakes of these metals. Methods: We analyzed lip products by inductively coupled plasma optical emission spectrometry and used previous estimates of lip product usage rates to determine daily oral intakes. We derived acceptable daily intakes (ADIs) based on information used to determine public health goals for exposure, and compared ADIs with estimated intakes to assess potential risks. Results: Most of the tested lip products contained high concentrations of titanium and aluminum. All examined products had detectable manganese. Lead was detected in 24 products (75%), with an average concentration of 0.36 ± 0.39 ppm, including one sample with 1.32 ppm. When used at the estimated average daily rate, estimated intakes were > 20% of ADIs derived for aluminum, cadmium, chromium, and manganese. In addition, average daily use of 10 products tested would result in chromium intake exceeding our estimated ADI for chromium. For high rates of product use (above the 95th percentile), the percentages of samples with estimated metal intakes exceeding ADIs were 3% for aluminum, 68% for chromium, and 22% for manganese. Estimated intakes of lead were < 20% of ADIs for average and high use. Conclusions: Cosmetics safety should be assessed not only by the presence of hazardous contents, but also by comparing estimated exposures with health-based standards. In addition to lead, metals such as aluminum, cadmium, chromium, and manganese require further investigation. PMID:23674482

Enhanced pyruvate production in Candida glabrata by carrier engineering.

PubMed

Luo, Zhengshan; Liu, Song; Du, Guocheng; Xu, Sha; Zhou, Jingwen; Chen, Jian

2018-02-01

Pyruvate is an important organic acid that plays a key role in the central metabolic pathway. Manipulating transporters is an efficient strategy to enhance production of target organic acids and a means to understand the effects of altered intracellular pyruvate content on global metabolic networks. Efforts have been made to manipulate mitochondrial pyruvate carrier (MPC) to transport pyruvate into different subcellular compartments in Candida glabrata to demonstrate the effects of the subcellular distribution of pyruvate on central carbon metabolism. By increasing the mitochondrial pyruvate content through enhancing the rate of pyruvate transport into mitochondria, a high central carbon metabolism rate, specific growth rate and specific pyruvate production rate were obtained. Comparing the intracellular pyruvate content of engineered and control strains showed that higher intracellular pyruvate levels were not conducive to improving pyruvate productivity or central carbon metabolism. Plasma membrane expression of MPCs significantly increased the expression levels of key rate-limiting glycolytic enzymes. Moreover, pyruvate production of CGΔura3-Sp-MPC1, CGΔura3-Sp-MPC2, and CGΔura3-Sp-MPC1-Sp-MPC2 increased 134.4%, 120.3%, and 30.0%, respectively. In conclusion, lower intracellular pyruvate content enhanced central carbon metabolism and provided useful clues for improving the production of other organic acids in microorganisms. © 2017 Wiley Periodicals, Inc.

Nomenclature and traceability debate for biosimilars: small-molecule surrogates lend support for distinguishable nonproprietary names.

PubMed

Chao, Jingdong; Skup, Martha; Alexander, Emily; Tundia, Namita; Macaulay, Dendy; Wu, Eric; Mulani, Parvez

2015-03-01

The purpose of the present study was to investigate the traceability of adverse events (AEs) for branded and generic drugs with identical nonproprietary names and to consider potential implications for the traceability of AEs for branded and biosimilar biologics. Adverse event reports in the Food and Drug Administration AE Reporting System (FAERS) were compared with those in a commercial insurance claims database (Truven Health MarketScan(®)) for 2 drugs (levetiracetam and enoxaparin sodium) with manufacturing or prescribing considerations potentially analogous to those of some biosimilars. Monthly rates of branded- and generic-attributed AEs were estimated pre- and post-generic entry. Post-entry branded-to-generic AE relative rate ratios were calculated. In FAERS, monthly AE rate ratios during the post-generic period showed a pattern in which AE rates for the branded products were greater than for the generic products. Differences in rates of brand- and generic-attributed AEs were statistically significant for both study drugs; the AE rate for the branded products peaked at approximately 10 times that of the generic levetiracetam products and approximately 4 times that of the generic enoxaparin sodium products. In contrast, monthly ratios for the MarketScan data were relatively constant over time. Use of the same nonproprietary name for generic and branded products may contribute to poor traceability of AEs reported in the FAERS database due to the significant misattribution of AEs to branded products (when those AEs were in fact associated with patient use of generic products). To ensure accurate and robust safety surveillance and traceability for biosimilar products in the United States, improved product identification mechanisms, such as related but distinguishable nonproprietary names for biosimilars and reference biologics, should be considered.

Comparative risk assessment and cessation information seeking among smokeless tobacco users.

PubMed

Jun, Jungmi; Nan, Xiaoli

2018-05-01

This research examined (1) smokeless tobacco users' comparative optimism in assessing the health and addiction risks of their own product in comparison with cigarettes, and (2) the effects of comparative optimism on cessation information-seeking. A nationally-representative sample from the 2015 Health Information National Trends Survey (HINTS)-FDA was employed. The analyses revealed the presence of comparative optimism in assessing both health and addiction risks among smokeless tobacco users. Comparative optimism was negatively correlated with most cessation information-seeking variables. Health bias (the health risk rating gap between the subject's own tobacco product and cigarettes) was associated with decreased intent to use cessation support. However, the health bias and addiction bias (the addiction risk rating gap between the subject's own tobacco product and cigarettes) were not consistent predictors of all cessation information-seeking variables, when covariates of socio-demographics and tobacco use status were included. In addition, positive correlations between health bias and past/recent cessation-information searches were observed. Optimisic biases may negatively influence cessation behaviors not only directly but also indirectly by influencing an important moderator, cessation information-seeking. Future interventions should prioritize dispelling the comparative optimism in perceiving risks of smokeless tobacco use, as well as provide more reliable cessation information specific to smokeless tobacco users. Copyright © 2018 Elsevier Ltd. All rights reserved.

Investigating why recycling gravity harvested algae increases harvestability and productivity in high rate algal ponds.

PubMed

Park, J B K; Craggs, R J; Shilton, A N

2013-09-15

It has previously been shown that recycling gravity harvested algae promotes Pediastrum boryanum dominance and improves harvestability and biomass production in pilot-scale High Rate Algal Ponds (HRAPs) treating domestic wastewater. In order to confirm the reproducibility of these findings and investigate the mechanisms responsible, this study utilized twelve 20 L outdoor HRAP mesocosms operated with and without algal recycling. It then compared the recycling of separated solid and liquid components of the harvested biomass against un-separated biomass. The work confirmed that algal recycling promoted P. boryanum dominance, improved 1 h-settleability by >20% and increased biomass productivity by >25% compared with controls that had no recycling. With regard to the improved harvestability, of particular interest was that recycling the liquid fraction alone caused a similar improvement in settleability as recycling the solid fraction. This may be due to the presence of extracellular polymeric substances in the liquid fraction. While there are many possible mechanisms that could account for the increased productivity with algal recycling, all but two were systematically eliminated: (i) the mean cell residence time was extended thereby increasing the algal concentration and more fully utilizing the incident sunlight and, (ii) the relative proportions of algal growth stages (which have different specific growth rates) was changed, resulting in a net increase in the overall growth rate of the culture. Copyright © 2013 Elsevier Ltd. All rights reserved.

Parallel microfluidic synthesis of size-tunable polymeric nanoparticles using 3D flow focusing towards in vivo study

PubMed Central

Lim, Jong-Min; Bertrand, Nicolas; Valencia, Pedro M.; Rhee, Minsoung; Langer, Robert; Jon, Sangyong; Farokhzad, Omid C.; Karnik, Rohit

2014-01-01

Microfluidic synthesis of nanoparticles (NPs) can enhance the controllability and reproducibility in physicochemical properties of NPs compared to bulk synthesis methods. However, applications of microfluidic synthesis are typically limited to in vitro studies due to low production rates. Herein, we report the parallelization of NP synthesis by 3D hydrodynamic flow focusing (HFF) using a multilayer microfluidic system to enhance the production rate without losing the advantages of reproducibility, controllability, and robustness. Using parallel 3D HFF, polymeric poly(lactide-co-glycolide)-b-polyethyleneglycol (PLGA-PEG) NPs with sizes tunable in the range of 13–150 nm could be synthesized reproducibly with high production rate. As a proof of concept, we used this system to perform in vivo pharmacokinetic and biodistribution study of small (20 nm diameter) PLGA-PEG NPs that are otherwise difficult to synthesize. Microfluidic parallelization thus enables synthesis of NPs with tunable properties with production rates suitable for both in vitro and in vivo studies. PMID:23969105

Kinetics of homogeneous and surface-catalyzed mercury(II) reduction by iron(II)

USGS Publications Warehouse

Amirbahman, Aria; Kent, Douglas B.; Curtis, Gary P.; Marvin-DiPasquale, Mark C.

2013-01-01

Production of elemental mercury, Hg(0), via Hg(II) reduction is an important pathway that should be considered when studying Hg fate in environment. We conducted a kinetic study of abiotic homogeneous and surface-catalyzed Hg(0) production by Fe(II) under dark anoxic conditions. Hg(0) production rate, from initial 50 pM Hg(II) concentration, increased with increasing pH (5.5–8.1) and aqueous Fe(II) concentration (0.1–1 mM). The homogeneous rate was best described by the expression, rhom = khom [FeOH+] [Hg(OH)2]; khom = 7.19 × 10+3 L (mol min)−1. Compared to the homogeneous case, goethite (α-FeOOH) and hematite (α-Fe2O3) increased and γ-alumina (γ-Al2O3) decreased the Hg(0) production rate. Heterogeneous Hg(0) production rates were well described by a model incorporating equilibrium Fe(II) adsorption, rate-limited Hg(II) reduction by dissolved and adsorbed Fe(II), and rate-limited Hg(II) adsorption. Equilibrium Fe(II) adsorption was described using a surface complexation model calibrated with previously published experimental data. The Hg(0) production rate was well described by the expression rhet = khet [>SOFe(II)] [Hg(OH)2], where >SOFe(II) is the total adsorbed Fe(II) concentration; khet values were 5.36 × 10+3, 4.69 × 10+3, and 1.08 × 10+2 L (mol min)−1 for hematite, goethite, and γ-alumina, respectively. Hg(0) production coupled to reduction by Fe(II) may be an important process to consider in ecosystem Hg studies.

The production rate of cosmogenic 21-Ne in chondrites deduced from 81-Kr measurements

NASA Technical Reports Server (NTRS)

Schultz, L.; Freundel, M.

1986-01-01

Cosmogenic Ne-21 is used widely to calculate exposure ages of stone meteorites. In order to do so, the production rate P(21) must be known. This rate, however, is dependent on the chemical composition of the meteorite as well as the mass of, and position within, the meteoroid during its exposure to the cosmic radiation. Even for a mean shielding the production rates determined from measurments of different radionuclides vary by a factor of two. A method that can be used to determine exposure ages of meteorites that avoids shielding and chemical composition corrections is the -81-Kr-Kr-method. However, for chondrites, in many cases, the direct determination of production rates for the Kr isotopes is prevented by the trapped gases and the neutron effects on bromine. Therefore, this method was applied to four eucrite falls and then their 81-Kr-83-Kr-ages were compared to their cosmogenic Ne-21 and Ar-38 concentrations. The eucrites Bouvante-le-Haut, Juvinas, Sioux County, and Stannern were chosen for these measurements because of their similar chemical composition regarding the major elements.

Energy deposition rates by charged particles. [in upper atmosphere

NASA Technical Reports Server (NTRS)

Torkar, K. M.; Urban, A.; Bjordal, J.; Lundblad, J. A.; Soraas, F.; Smith, L. G.; Dumbs, A.; Grandal, B.; Ulwick, J. C.; Vancour, R. P.

1985-01-01

A summary of measurements of the precipitation of electrons and positive ions (in the keV-MeV range) detected aboard eight rockets launched within the Energy Budget Campaign from Northern Scandinavia is given, together with corresponding satellite data. In some cases strong temporal variations of the downgoing integral fluxes were observed. The fluxes provide the background for the calculated ion production rates and altitude profiles of the energy deposition into the atmosphere at different levels of geomagnetic disturbance and cosmic noise absorption. The derived ion production rates by eneretic particles are compared to other night-time ionisation sources.

Understanding the impact of flow rate and recycle on the conversion of a complex biorefinery stream using a flow-through microbial electrolysis cell

DOE PAGES

Lewis, Alex J.; Borole, Abhijeet P.

2016-06-16

We investigated the effect of flow rate and recycle on the conversion of a biomass-derived pyrolysis aqueous phase in amicrobial electrolysis cell (MEC) to demonstrate production of renewable hydrogen in biorefinery. A continuous MEC operation was investigated under one-pass and recycle conditions usingthe complex, biomass-derived, fermentable, mixed substrate feed at a constant concentration of 0.026 g/L,while testing flow rates ranging from 0.19 to 3.6 mL/min. This corresponds to an organic loading rate (OLR) of 0.54₋10 g/L-day. Mass transfer issues observed at low flow rates were alleviated using high flow rates.Increasing the flow rate to 3.6 mL/min (3.7 min HRT) duringmore » one-pass operation increased the hydrogen productivity 3-fold, but anode conversion efficiency (ACE) decreased from 57.9% to 9.9%. Recycle of the anode liquid helped to alleviate kinetic limitations and the ACE increased by 1.8-fold and the hydrogen productivity by 1.2-fold compared to the one-pass condition at the flow rate of 3.6 mL/min (10 g/L-d OLR). High COD removal was also achieved under recycle conditions, reaching 74.2 1.1%, with hydrogen production rate of 2.92 ± 0.51 L/L-day. This study demonstrates the advantages of combining faster flow rates with a recycle process to improve rate of hydrogen production from a switchgrass-derived stream in the biorefinery.« less

Transportation costs for forest products from the Puget Sound area and Alaska to Pacific Rim markets.

Treesearch

Harold W. Wisdom

1990-01-01

Ocean freight rates to Pacific Rim markets for softwood logs, cants, and wood pulp from Alaska were compared with rates from the Puget Sound area by using analysis of covariance and analysis of variance techniques. The results did not support the hypothesis that lower freight rates for Alaska result from shorter shipping distances. In many cases, ocean freight rates...

The carbon dioxide production rate assumption biases gastric emptying parameters in healthy adults.

PubMed

Markey, Oonagh; Shafat, Amir

2013-02-28

An altered gastric emptying (GE) rate has been implicated in the aetiology of obesity. The (13)C-octanoic acid breath test (OBT) is frequently used to measure GE, and the cumulative percentage of (13)C recovered (cPDR) is a common outcome measure. However, true cPDR in breath is dependent on accurate measurement of carbon dioxide production rate (VCO(2)). The current study aimed to quantify differences in the (13)C OBT results obtained using directly measured VCO(2) (VCO(2DM)) compared with (i) predicted from resting VCO(2) (VCO(2PR)) and (ii) predicted from body surface area VCO(2) (VCO(2BSA)). The GE rate of a high-fat test meal was assessed in 27 lean subjects using the OBT. Breath samples were gathered during the fasted state and at regular intervals throughout the 6-h postprandial period for determination of (13)C-isotopic enrichment by continuous-flow isotope-ratio mass spectrometry. The VCO(2) was measured directly from exhaled air samples and the PDR calculated by three methods. The bias and the limits of agreement were calculated using Bland-Altman plots. Compared with the VCO(2DM), the cPDR was underestimated by VCO(2PR) (4.8%; p = 0.0001) and VCO(2BSA) (2.7%; p = 0.02). The GE T(half) was underestimated by VCO(2PR) (13 min; p = 0.0001) and VCO(2BSA) (10 min; p = 0.01), compared with VCO(2DM). The findings highlight the importance of directly measuring VCO(2)production rates throughout the (13)C OBT and could partly explain the conflicting evidence regarding the effect of obesity on GE rates. Copyright © 2013 John Wiley & Sons, Ltd.

Increased ethanol production by deletion of HAP4 in recombinant xylose-assimilating Saccharomyces cerevisiae.

PubMed

Matsushika, Akinori; Hoshino, Tamotsu

2015-12-01

The Saccharomyces cerevisiae HAP4 gene encodes a transcription activator that plays a key role in controlling the expression of genes involved in mitochondrial respiration and reductive pathways. This work examines the effect of knockout of the HAP4 gene on aerobic ethanol production in a xylose-utilizing S. cerevisiae strain. A hap4-deleted recombinant yeast strain (B42-DHAP4) showed increased maximum concentration, production rate, and yield of ethanol compared with the reference strain MA-B42, irrespective of cultivation medium (glucose, xylose, or glucose/xylose mixtures). Notably, B42-DHAP4 was capable of producing ethanol from xylose as the sole carbon source under aerobic conditions, whereas no ethanol was produced by MA-B42. Moreover, the rate of ethanol production and ethanol yield (0.44 g/g) from the detoxified hydrolysate of wood chips was markedly improved in B42-DHAP4 compared to MA-B42. Thus, the results of this study support the view that deleting HAP4 in xylose-utilizing S. cerevisiae strains represents a useful strategy in ethanol production processes.

[Proceeding: Production rate, metabolic clearance rate and mean plasma concentration of cortisol in hyperthyroidism (author's transl)].

PubMed

Linquette, M; Lefebvre, J; Racadot, A; Cappoen, J P

1975-01-01

The adrenocortical function was studied in 23 patients with hyperthyroidism and compared with a group of 15 normal subjects. Parameters of adrenal function were determined with 1,2(3)H-cortisol. The half-life of cortisol is significantly shortened in hyperthyroidism, as compared to normal subjects (49,5 +/- 6,6 min vs 68,3 +/- 10,5 min) and metabolic clearance rate is increased (418,5 +/- 89,5 L/24 h vs 237,5 +/- 48,5 L/24 h, for normal subjects). The production rate of cortisol, calculated from specific and cumulate activities of THE and THF is increased in hyperthyroidism expressed as mg/24 h or mg/m2/24 h (respectively : 26,7 +/- 7,8 mg/24 h vs 15,7 +/- 3 mg/24 h and 16,9 +/- 4,6 mg/m2/24 h vs 9,5 +/- 1,8 mg/m2/24 h). The mean plasma concentration, calculated as the radio (see article) is not statiscally different in hyperthyroid and normal subjects (6,8 +/- 2,1 microg/100 ml vs 7,3 +/- 1,9 microg/100 ml). 7 patients were reinvestigated after treatment of thyrotoxicosis when they were clinically and biologically in euthyroid state. All the values were normalized, without statistically significant difference from control (T 1/2 = 65,4 +/- 18 min, Metb Cl. Rate : 255 +/- 64,5 L/24 h, production rate : 15,6 +/- 1,8 mg/24 h and 9 +/- 1,4 mg/m2/24 h. mean plasma concentration : 6,8 +/- 2,8 microg/100 ml). Shortened cortisol half life, increased metabolic clearance rate and production rate, and normal mean plasma concentration have been reported in hyperthyroidism (Peterson, Copinschi, Gallagher). These changes, secondary to thyroid hormone excess, are the consequences of increased hepatic catabolism of cortisol. The activity of 11 OH steroid deshydrogenase is increased, as demonstrated by increased ratio (see article) in normal subjects (0,001 less than p less than 0,005). There is a high proportion of 17 kéto metabolites (E, DHE, THE) whose feed-back effect is weak as compared to 17 OH metabolites (F, DHF, THF). The hypothalamo-hypophyso-adrenal system is stimulated to maintain a normal plasma concentration. The fact that the mean plasma concentration is normal despite the increased production rate suggest that changes are rather due to increased catabolism than to central effect of thyroid hormones.

Numerical simulation of Forchheimer flow to a partially penetrating well with a mixed-type boundary condition

NASA Astrophysics Data System (ADS)

Mathias, Simon A.; Wen, Zhang

2015-05-01

This article presents a numerical study to investigate the combined role of partial well penetration (PWP) and non-Darcy effects concerning the performance of groundwater production wells. A finite difference model is developed in MATLAB to solve the two-dimensional mixed-type boundary value problem associated with flow to a partially penetrating well within a cylindrical confined aquifer. Non-Darcy effects are incorporated using the Forchheimer equation. The model is verified by comparison to results from existing semi-analytical solutions concerning the same problem but assuming Darcy's law. A sensitivity analysis is presented to explore the problem of concern. For constant pressure production, Non-Darcy effects lead to a reduction in production rate, as compared to an equivalent problem solved using Darcy's law. For fully penetrating wells, this reduction in production rate becomes less significant with time. However, for partially penetrating wells, the reduction in production rate persists for much larger times. For constant production rate scenarios, the combined effect of PWP and non-Darcy flow takes the form of a constant additional drawdown term. An approximate solution for this loss term is obtained by performing linear regression on the modeling results.

Methane Emissions from Conventional and Unconventional Natural Gas Production Sites in the Marcellus Shale Basin.

PubMed

Omara, Mark; Sullivan, Melissa R; Li, Xiang; Subramanian, R; Robinson, Allen L; Presto, Albert A

2016-02-16

There is a need for continued assessment of methane (CH4) emissions associated with natural gas (NG) production, especially as recent advancements in horizontal drilling combined with staged hydraulic fracturing technologies have dramatically increased NG production (we refer to these wells as "unconventional" NG wells). In this study, we measured facility-level CH4 emissions rates from the NG production sector in the Marcellus region, and compared CH4 emissions between unconventional NG (UNG) well pad sites and the relatively smaller and older "conventional" NG (CvNG) sites that consist of wells drilled vertically into permeable geologic formations. A top-down tracer-flux CH4 measurement approach utilizing mobile downwind intercepts of CH4, ethane, and tracer (nitrous oxide and acetylene) plumes was performed at 18 CvNG sites (19 individual wells) and 17 UNG sites (88 individual wells). The 17 UNG sites included four sites undergoing completion flowback (FB). The mean facility-level CH4 emission rate among UNG well pad sites in routine production (18.8 kg/h (95% confidence interval (CI) on the mean of 12.0-26.8 kg/h)) was 23 times greater than the mean CH4 emissions from CvNG sites. These differences were attributed, in part, to the large size (based on number of wells and ancillary NG production equipment) and the significantly higher production rate of UNG sites. However, CvNG sites generally had much higher production-normalized CH4 emission rates (median: 11%; range: 0.35-91%) compared to UNG sites (median: 0.13%, range: 0.01-1.2%), likely resulting from a greater prevalence of avoidable process operating conditions (e.g., unresolved equipment maintenance issues). At the regional scale, we estimate that total annual CH4 emissions from 88 500 combined CvNG well pads in Pennsylvania and West Virginia (660 Gg (95% CI: 500 to 800 Gg)) exceeded that from 3390 UNG well pads by 170 Gg, reflecting the large number of CvNG wells and the comparably large fraction of CH4 lost per unit production. The new emissions data suggest that the recently instituted Pennsylvania CH4 emissions inventory substantially underestimates measured facility-level CH4 emissions by >10-40 times for five UNG sites in this study.

High activity of mitochondrial glycerophosphate dehydrogenase and glycerophosphate-dependent ROS production in prostate cancer cell lines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhury, Subir K.R.; Department of Pathology and Molecular Medicine, McMaster University, 1200 Main St. West, Hamilton, Ont., L8N 3Z5; Gemin, Adam

Most malignant cells are highly glycolytic and produce high levels of reactive oxygen species (ROS) compared to normal cells. Mitochondrial glycerophosphate dehydrogenase (mGPDH) participates in the reoxidation of cytosolic NADH by delivering reducing equivalents from this molecule into the electron transport chain, thus sustaining glycolysis. Here, we investigate the role of mGPDH in maintaining an increased rate of glycolysis and evaluate glycerophosphate-dependent ROS production in prostate cancer cell lines (LNCaP, DU145, PC3, and CL1). Immunoblot, polarographic, and spectrophotometric analyses revealed that mGPDH abundance and activity was significantly elevated in prostate cancer cell lines when compared to the normal prostate epithelialmore » cell line PNT1A. Furthermore, both the glycolytic capacity and glycerophosphate-dependent ROS production was increased 1.68- to 4.44-fold and 5- to 7-fold, respectively, in prostate cancer cell lines when compared to PNT1A cells. Overall, these data demonstrate that mGPDH is involved in maintaining a high rate of glycolysis and is an important site of electron leakage leading to ROS production in prostate cancer cells.« less

Comparative study of quality and efficacy of originator's and generic ABZ for the mass treatment of soil-transmitted nematode infections in Nepal

PubMed Central

Albonico, Marco; Mathema P., Pragya; Montresor, Antonio; Khakurel, Balkrishna; Reggi, Valerio; Pandey, Sharada; Savioli, Lorenzo

2017-01-01

Quality and efficacy of two locally-manufactured generic albendazole (ABZ) products (Curex and Royal Drug) used for de-worming children in Nepal since 1999 were tested against the originator product (GSK). The study conducted disintegration and dissolution testing and a randomised controlled clinical trial comparing cure rates (CR) and egg reduction rates (ERR) for Ascaris lumbricoides, Trichuris trichiura and hookworm infections. Stool samples from 1277 children were examined before and 21 days after treatment. For A. lumbricoides GSK's (97.0%) and Royal Drug's (95.0 %) product provided significantly higher CR than Curex's (82.6%); however, all products provided ERR higher than 90%. For T. trichiura Curex's product showed significantly lower ERR (63.2%). For hookworm, GSK's product performed significantly better (CR 74.3%, ERR 87.1%) than Royal Drug's (CR 53.3%, ERR 80.8%) and Curex's (CR 50.7%, ERR 73.1%). Only GSK's product passed both disintegration and dissolution. Both generic products failed dissolution. Curex's product showed poor disintegration. Despite its lower efficacy the cheaper Curex's product achieved good results in controlling morbidity due to soil-transmitted helminth (STH) infections. This study shows that cost-effectiveness of drugs used in mass de-worming campaigns should not be inferred on the basis of one single quality testing parameter. PMID:17129592

Asexual and sexual replication in sporulating organisms

NASA Astrophysics Data System (ADS)

Lee, Bohyun; Tannenbaum, Emmanuel

2007-08-01

Replication via sporulation is the replication strategy for all multicellular life, and may even be observed in unicellular life (such as with budding yeast). We consider diploid populations replicating via one of two possible sporulation mechanisms. (1) Asexual sporulation, whereby adult organisms produce single-celled diploid spores that grow into adults themselves. (2) Sexual sporulation, whereby adult organisms produce single-celled diploid spores that divide into haploid gametes. The haploid gametes enter a haploid “pool,” where they may recombine with other haploids to form a diploid spore that then grows into an adult. We consider a haploid fusion rate given by second-order reaction kinetics. We work with a simplified model where the diploid genome consists of only two chromosomes, each of which may be rendered defective with a single point mutation of the wild-type. We find that the asexual strategy is favored when the rate of spore production is high compared to the characteristic growth rate from a spore to a reproducing adult. Conversely, the sexual strategy is favored when the rate of spore production is low compared to the characteristic growth rate from a spore to a reproducing adult. As the characteristic growth time increases, or as the population density increases, the critical ratio of spore production rate to organism growth rate at which the asexual strategy overtakes the sexual one is pushed to higher values. Therefore, the results of this model suggest that, for complex multicellular organisms, sexual replication is favored at high population densities and low growth and sporulation rates.

Implications of two Holocene time-dependent geomagnetic models for cosmogenic nuclide production rate scaling

NASA Astrophysics Data System (ADS)

Lifton, Nathaniel

2016-01-01

The geomagnetic field is a major influence on in situ cosmogenic nuclide production rates at a given location (in addition to atmospheric pressure and, to a lesser extent, solar modulation effects). A better understanding of how past fluctuations in these influences affected production rates should allow more accurate application of cosmogenic nuclides. As such, this work explores the cosmogenic nuclide production rate scaling implications of two recent time-dependent spherical harmonic geomagnetic models spanning the Holocene. Korte and Constable (2011, Phys. Earth Planet. Inter.188, 247-259) and Korte et al. (2011, Earth Planet. Sci. Lett. 312, 497-505) recently updated earlier spherical harmonic paleomagnetic models with new paleomagnetic data from sediment cores in addition to new archeomagnetic and volcanic data. These updated models offer improved resolution and accuracy over the previous versions, in part due to increased temporal and spatial data coverage. In addition, Pavón-Carrasco et al. (2014, Earth Planet. Sci. Lett. 388, 98-109) developed another time-dependent spherical harmonic model of the Holocene geomagnetic field, based solely on archeomagnetic and volcanic paleomagnetic data from the same underlying paleomagnetic database as the Korte et al. models, but extending to 14 ka. With the new models as input, trajectory-traced estimates of effective vertical cutoff rigidity (RC - the standard method for ordering cosmic ray data) yield significantly different time-integrated scaling predictions when compared to each other and to results using the earlier models. In addition, predictions of each new model using RC are tested empirically using recently published production rate calibration data for both 10Be and 3He, and compared to predictions using corresponding time-varying geocentric dipolar RC formulations and a static geocentric axial dipole (GAD) model. Results for the few calibration sites from geomagnetically sensitive regions suggest that the Pavón-Carrasco et al. (2014) time-varying dipolar model tends to predict sea level, high latitude production rates more in line with those from calibration sites not affected by geomagnetic variations. This suggests that uncertainties arising from hemispheric and temporal sampling biases in the Holocene spherical harmonic models considered here, combined with the currently limited spatial and temporal distribution of production rate calibration sites as empirical tests, limit the robustness of the non-dipole aspects of these models for production rate scaling. These analyses should be revisited as such models improve and additional calibration sites become available.

Possible Increase in Nitric Oxide Production by Lightning Discharges Due to Catalytic Effects of Ice Particles

NASA Technical Reports Server (NTRS)

Peterson, Harold; Beasley, William

2011-01-01

We address the question of whether ice crystals with habits typically encountered by lightning discharges may serve as catalysts for the production of NOx by lightning. If so, and if the effect is sufficiently large, it would need to be taken into account in estimates of global NOx production by lightning. In this study, we make a series of plausible assumptions about the temperatures and concentrations of reactant species in the environment of discharges and we postulate a mechanism by which ice crystals could adsorb nitrogen atoms. We then compare production rates between uncatalyzed and catalyzed reactions at 2000 K, 3000 K, and 4000 K, temperatures observed in lightning channels during the cool-down period after a return stroke. Catalyzed NO production rates are greater at 2000 K, whereas uncatalyzed production occurs most rapidly at 4000 K. The channel temperature stays around 2000 K for a longer period of time than at 4000 K. The longer residence time at 2000 K is sufficient to allow fresh reactants to participate in the mix in. Therefore, our results suggest that nearly three times as much NO per flash is produced by ice-catalyzed reactions as compared with uncatalyzed reactions.

Presenteeism, Absenteeism, and Lost Work Productivity among Depressive Patients from Five Cities of Colombia.

PubMed

Uribe, José Miguel; Pinto, Diana M; Vecino-Ortiz, Andres I; Gómez-Restrepo, Carlos; Rondón, Martín

2017-12-01

To estimate productivity losses due to absenteeism and presenteeism and their determinants in patients with depression from five Colombian cities. We used data from a multicenter, mixed-methods study of adult patients diagnosed with major depressive disorder or double depression (major depressive disorder plus dysthymia) during 2010. The World Health Organization's Health and Work Performance Questionnaire was used to assess absenteeism and presenteeism. We explored the determinants of productivity losses using a two-part model. We also used a costing model to calculate the corresponding monetary losses. We analyzed data from 107 patients employed in the last 4 weeks. Absenteeism was reported by 70% of patients; presenteeism was reported by all but one. Half of the patients reported a level of performance at work at least 50% below usual. Average number of hours per month lost to absenteeism and presenteeism was 43 and 51, respectively. The probability of any absenteeism was 17 percentage points lower in patients rating their mental health favorably compared with those rating it poorly (standard error [SE] 0.09; P < 0.10) and 19 percentage points higher in patients with at least one comorbidity compared with patients with none (SE 0.10; P < 0.10). All other covariates showed no significant associations on hours lost to absenteeism. Patients with favorable mental health self-ratings had 16.4 fewer hours per month of presenteeism compared with those with poor self-ratings (SE 4.52; P < 0.01). The 2015 monetary value of productivity losses amounted to US $840 million. This study in a middle-income country confirms the high economic burden of depression. Health policies and workplace interventions ensuring adequate diagnosis and treatment of depression are recommended. Copyright © 2017. Published by Elsevier Inc.

An age-structured model of hiv infection that allows for variations in the production rate of viral particles and the death rate of productively infected cells.

PubMed

Nelson, Patrick W; Gilchrist, Michael A; Coombs, Daniel; Hyman, James M; Perelson, Alan S

2004-09-01

Mathematical models of HIV-1 infection can help interpret drug treatment experiments and improve our understanding of the interplay between HIV-1 and the immune system. We develop and analyze an age- structured model of HIV-1 infection that allows for variations in the death rate of productively infected T cells and the production rate of viral particles as a function of the length of time a T cell has been infected. We show that this model is a generalization of the standard differential equation and of delay models previously used to describe HIV-1 infection, and provides a means for exploring fundamental issues of viral production and death. We show that the model has uninfected and infected steady states, linked by a transcritical bifurcation. We perform a local stability analysis of the nontrivial equilibrium solution and provide a general stability condition for models with age structure. We then use numerical methods to study solutions of our model focusing on the analysis of primary HIV infection. We show that the time to reach peak viral levels in the blood depends not only on initial conditions but also on the way in which viral production ramps up. If viral production ramps up slowly, we find that the time to peak viral load is delayed compared to results obtained using the standard (constant viral production) model of HIV infection. We find that data on viral load changing over time is insufficient to identify the functions specifying the dependence of the viral production rate or infected cell death rate on infected cell age. These functions must be determined through new quantitative experiments.

Reaction Acceleration in Thin Films with Continuous Product Deposition for Organic Synthesis.

PubMed

Wei, Zhenwei; Wleklinski, Michael; Ferreira, Christina; Cooks, R Graham

2017-08-01

Thin film formats are used to study the Claisen-Schmidt base-catalyzed condensation of 6-hydroxy-1-indanone with substituted benzaldehydes and to compare the reaction acceleration relative to the bulk. Relative acceleration factors initially exceeded 10 3 and were on the order of 10 2 at steady state, although the confined volume reaction was not electrostatically driven. Substituent effects were muted compared to those in the corresponding bulk and microdroplet reactions and it is concluded that the rate-limiting step at steady state is reagent transport to the interface. Conditions were found that allowed product deposition from the thin film to occur continuously as the reaction mixture was added and as the solvent evaporated. Yields of 74 % and production rates of 98 mg h -1 were reached in a very simple experimental system that could be multiplexed to greater scales. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Laparoscopic lens fogging: solving a common surgical problem in standard and robotic laparoscopes via a scientific model.

PubMed

Manning, Todd G; Papa, Nathan; Perera, Marlon; McGrath, Shannon; Christidis, Daniel; Khan, Munad; O'Beirne, Richard; Campbell, Nicholas; Bolton, Damien; Lawrentschuk, Nathan

2018-03-01

Laparoscopic lens fogging (LLF) hampers vision and impedes operative efficiency. Attempts to reduce LLF have led to the development of various anti-fogging fluids and warming devices. Limited literature exists directly comparing these techniques. We constructed a model peritoneum to simulate LLF and to compare the efficacy of various anti-fogging techniques. Intraperitoneal space was simulated using a suction bag suspended within an 8 L container of water. LLF was induced by varying the temperature and humidity within the model peritoneum. Various anti-fogging techniques were assessed including scope warmers, FRED TM , Resoclear TM , chlorhexidine, betadine and immersion in heated saline. These products were trialled with and without the use of a disposable scope warmer. Vision scores were evaluated by the same investigator for all tests and rated according to a predetermined scale. Fogging was assessed for each product or technique 30 times and a mean vision rating was recorded. All products tested imparted some benefit, but FRED TM performed better than all other techniques. Betadine and Resoclear TM performed no better than the use of a scope warmer alone. Immersion in saline prior to insertion resulted in decreased vision ratings. The robotic scope did not result in LLF within the model. In standard laparoscopes, the most superior preventative measure was FRED TM utilised on a pre-warmed scope. Despite improvements in LLF with other products FRED TM was better than all other techniques. The robotic laparoscope performed superiorly regarding LLF compared to standard laparoscope.

Raney Ni-Sn catalyst for H2 production from biomass-derived hydrocarbons.

PubMed

Huber, G W; Shabaker, J W; Dumesic, J A

2003-06-27

Hydrogen (H2) was produced by aqueous-phase reforming of biomass-derived oxygenated hydrocarbons at temperatures near 500 kelvin over a tin-promoted Raney-nickel catalyst. The performance of this non-precious metal catalyst compares favorably with that of platinum-based catalysts for production of hydrogen from ethylene glycol, glycerol, and sorbitol. The addition of tin to nickel decreases the rate of methane formation from C-O bond cleavage while maintaining the high rates of C-C bond cleavage required for hydrogen formation.

Anaerobic co-digestion of spent coffee grounds with different waste feedstocks for biogas production.

PubMed

Kim, Jaai; Kim, Hakchan; Baek, Gahyun; Lee, Changsoo

2017-02-01

Proper management of spent coffee grounds has become a challenging problem as the production of this waste residue has increased rapidly worldwide. This study investigated the feasibility of the anaerobic co-digestion of spent coffee ground with various organic wastes, i.e., food waste, Ulva, waste activated sludge, and whey, for biomethanation. The effect of co-digestion was evaluated for each tested co-substrate in batch biochemical methane potential tests by varying the substrate mixing ratio. Co-digestion with waste activated sludge had an apparent negative effect on both the yield and production rate of methane. Meanwhile, the other co-substrates enhanced the reaction rate while maintaining methane production at a comparable or higher level to that of the mono-digestion of spent coffee ground. The reaction rate increased with the proportion of co-substrates without a significant loss in methanation potential. These results suggest the potential to reduce the reaction time and thus the reactor capacity without compromising methane production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Prolonged oral administration of potassium upon aldosterone biosynthesis by rat glomerulosa tissue in vitro.

PubMed

Regöly-Mérei, J; Sólyom, J

1975-01-01

Steroid production rate of adrenals derived from rats drinking a 0.3 M KC1 + 5% glucose solution for 7 days was compared to that of control rats drinking a 5% glucose solution in order to investigate the effect of potassium loading upon the early and late step of aldosterone biosynthesis. Following potassium loading the quartered adrenals produced more aldosterone but less corticosterone as compared to the control. Potassium loading resulted in an increased aldosterone production rate by capsular adrenals (z. glomerulosa) provided that the corticosterone concentration in the incubation medium was elevated either by incubating it together with the decapsulated adrenal or adding exogenous corticosterone (4--16 mug/ml) to the medium. The corticosterone to aldosterone converting capacity of capsular adrenals is markedly higher in the potassium-loaded rats than in the controls. In the first 15 minutes of incubation the corticosterone production rate of the two groups was equal, aldosterone production rate by capsular adrenals of potassium-loaded rats, being higher than that of control animals. Corticosterone output of capsular adrenals from potassium-loaded rats decreased more rapidly in course of the incubation than it did in control tissue. These results suggest that the increase in aldosterone secretion in vivo following potassium loading is due to the stimulation of conversion of corticosterone to aldosterone in the glomerulosa cells. However, the endogenous corticosterone production during the incubation of glomerulosa cells from pottasium-loaded rats decreases so rapidly that the cells are not capable of producing more aldosterone than the control ones in spite of activated 18-hydroxylase.

The influence of abrupt increases in seawater pCO2 on plankton productivity in the subtropical North Pacific Ocean

PubMed Central

Böttjer, Daniela; Letelier, Ricardo M.; Church, Matthew J.

2018-01-01

We conducted a series of experiments to examine short-term (2–5 days) effects of abrupt increases in the partial pressure of carbon dioxide (pCO2) in seawater on rates of primary and bacterial production at Station ALOHA (22°45’ N, 158° W) in the North Pacific Subtropical Gyre (NPSG). The majority of experiments (8 of 10 total) displayed no response in rates of primary production (measured by 14C-bicarbonate assimilation; 14C-PP) under elevated pCO2 (~1100 μatm) compared to ambient pCO2 (~387 μatm). In 2 of 10 experiments, rates of 14C-PP decreased significantly (~43%) under elevated pCO2 treatments relative to controls. Similarly, no significant differences between treatments were observed in 6 of 7 experiments where bacterial production was measured via incorporation of 3H-leucine (3H-Leu), while in 1 experiment, rates of 3H-Leu incorporation measured in the dark (3H-LeuDark) increased more than 2-fold under high pCO2 conditions. We also examined photoperiod-length, depth-dependent (0–125 m) responses in rates of 14C-PP and 3H-Leu incorporation to abrupt pCO2 increases (to ~750 μatm). In the majority of these depth-resolved experiments (4 of 5 total), rates of 14C-PP demonstrated no consistent response to elevated pCO2. In 2 of 5 depth-resolved experiments, rates of 3H-LeuDark incorporation were lower (10% to 15%) under elevated pCO2 compared to controls. Our results revealed that rates of 14C-PP and bacterial production in this persistently oligotrophic habitat generally demonstrated no or weak responses to abrupt changes in pCO2. We postulate that any effects caused by changes in pCO2 may be masked or outweighed by the role that nutrient availability and temperature play in controlling metabolism in this ecosystem. PMID:29694353

Study of the Effect of Nanoparticles and Surface Morphology on Reverse Osmosis and Nanofiltration Membrane Productivity

PubMed Central

Fang, Yuming; Duranceau, Steven J.

2013-01-01

To evaluate the significance of reverse osmosis (RO) and nanofiltration (NF) surface morphology on membrane performance, productivity experiments were conducted using flat-sheet membranes and three different nanoparticles, which included SiO2, TiO2 and CeO2. In this study, the productivity rate was markedly influenced by membrane surface morphology. Atomic force microscopy (AFM) analysis of membrane surfaces revealed that the higher productivity decline rates associated with polyamide RO membranes as compared to that of a cellulose acetate NF membrane was due to the inherent ridge-and-valley morphology of the active layer. The unique polyamide active layer morphology was directly related to the surface roughness, and was found to contribute to particle accumulation in the valleys causing a higher flux decline than in smoother membranes. Extended RO productivity experiments using laboratory grade water and diluted pretreated seawater were conducted to compare the effect that different nanoparticles had on membrane active layers. Membrane flux decline was not affected by particle type when the feed water was laboratory grade water. On the other hand, membrane productivity was affected by particle type when pretreated diluted seawater served as feed water. It was found that CeO2 addition resulted in the least observable flux decline, followed by SiO2 and TiO2. A productivity simulation was conducted by fitting the monitored flux data into a cake growth rate model, where the model was modified using a finite difference method to incorporate surface thickness variation into the analysis. The ratio of cake growth term (k1) and particle back diffusion term (k2) was compared in between different RO and NF membranes. Results indicated that k2 was less significant for surfaces that exhibited a higher roughness. It was concluded that the valley areas of thin-film membrane surfaces have the ability to capture particles, limiting particle back diffusion. PMID:24956946

Sensory evaluation ratings and melting characteristics show that okra gum is an acceptable milk-fat ingredient substitute in chocolate frozen dairy dessert.

PubMed

Romanchik-Cerpovicz, Joelle E; Costantino, Amanda C; Gunn, Laura H

2006-04-01

Reducing dietary fat intake may lower the risk of developing coronary heart disease. This study examined the feasibility of substituting okra gum for 25%, 50%, 75%, or 100% milk fat in frozen chocolate dairy dessert. Fifty-six consumers evaluated the frozen dairy desserts using a hedonic scale. Consumers rated color, smell, texture, flavor, aftertaste, and overall acceptability characteristics of all products as acceptable. All ratings were similar among the products except for the aftertaste rating, which was significantly lower for chocolate frozen dairy dessert containing 100% milk-fat replacement with okra gum compared with the control (0% milk-fat replacement) (P<0.05). Whereas melting points of all products were similar, melting rates slowed significantly as milk-fat replacement with okra gum increased, suggesting that okra gum may increase the stability of frozen dairy desserts (P<0.05). Overall, this study shows that okra gum is an acceptable milk-fat ingredient substitute in chocolate frozen dairy dessert.

Performance of a new carbon dioxide absorbent, Yabashi lime® as compared to conventional carbon dioxide absorbent during sevoflurane anesthesia in dogs.

PubMed

Kondoh, Kei; Atiba, Ayman; Nagase, Kiyoshi; Ogawa, Shizuko; Miwa, Takashi; Katsumata, Teruya; Ueno, Hiroshi; Uzuka, Yuji

2015-08-01

In the present study, we compare a new carbon dioxide (CO2) absorbent, Yabashi lime(®) with a conventional CO2 absorbent, Sodasorb(®) as a control CO2 absorbent for Compound A (CA) and Carbon monoxide (CO) productions. Four dogs were anesthetized with sevoflurane. Each dog was anesthetized with four preparations, Yabashi lime(®) with high or low-flow rate of oxygen and control CO2 absorbent with high or low-flow rate. CA and CO concentrations in the anesthetic circuit, canister temperature and carbooxyhemoglobin (COHb) concentration in the blood were measured. Yabashi lime(®) did not produce CA. Control CO2 absorbent generated CA, and its concentration was significantly higher in low-flow rate than a high-flow rate. CO was generated only in low-flow rate groups, but there was no significance between Yabashi lime(®) groups and control CO2 absorbent groups. However, the CO concentration in the circuit could not be detected (≤5ppm), and no change was found in COHb level. Canister temperature was significantly higher in low-flow rate groups than high-flow rate groups. Furthermore, in low-flow rate groups, the lower layer of canister temperature in control CO2 absorbent group was significantly higher than Yabashi lime(®) group. CA and CO productions are thought to be related to the composition of CO2 absorbent, flow rate and canister temperature. Though CO concentration is equal, it might be safer to use Yabashi lime(®) with sevoflurane anesthesia in dogs than conventional CO2 absorbent at the point of CA production.

Energy Vs. Productivity: Diminishing Returns

ERIC Educational Resources Information Center

MOSAIC, 1975

1975-01-01

Energy invested in corn production is compared with food energy returned in calculations by David Pimentel at Cornell University. The rate of return is falling off sharply in this already energy-intensive agriculture. Increased energy input, in the form of fertilizer, would yield far greater returns where agriculture is less sophisticated.…

Changing Workloads and Productivity in Interlibrary Loan.

ERIC Educational Resources Information Center

Paine, Nancy E.; Ward, John

1996-01-01

Compares interlibrary loan data from a 1995 survey of Greater Midwest Research Library Consortium and Association of Research Libraries members with a 1989 survey. Shows an increase in transaction to staff ratio and a negative correlation between transaction to staff ratio and lending fill rate. Relates factors affecting productivity, such as…

The relationship between annual survival rate and migration distance in mallards: an examination of the time-allocation hypothesis for the evolution of migration

USGS Publications Warehouse

Hestbeck, J.B.; Nichols, J.D.; Hines, J.E.

1992-01-01

Predictions of the time-allocation hypothesis were tested with several a posteriori analyses of banding data for the mallard (Anas platyrhynchos). The time-allocation hypothesis states that the critical difference between resident and migrant birds is their allocation of time to reproduction on the breeding grounds and survival on the nonbreeding grounds. Residents have higher reproduction and migrants have higher survival. Survival and recovery rates were estimated by standard band-recovery methods for banding reference areas in the central United States and central Canada. A production-rate index was computed for each reference area with data from the U.S. Fish and Wildlife Service May Breeding Population Survey and July Production Survey. An analysis of covariance was used to test for the effects of migration distance and time period (decade) on survival, recovery, and production rates. Differences in migration chronology were tested by comparing direct-recovery distributions for different populations during the fall migration. Differences in winter locations were tested by comparing distributions of direct recoveries reported during December and January. A strong positive relationship was found between survival rate, and migration distance for 3 of the 4 age and sex classes. A weak negative relationship was found between recovery rate and migration distance. No relationship was found between production rate and migration distance. During the fall migration, birds from the northern breeding populations were located north of birds from the southern breeding populations. No pattern could be found in the relative locations of breeding and wintering areas. Although our finding that survival rate increased with migration distance was consistent with the time-allocation hypothesis, our results on migration chronology and location of wintering areas were not consistent with the mechanism underlying the time-allocation hypothesis. Neither this analysis nor other recent studies of life-history characteristics of migratory and resident birds supported the timeallocation hypothesis.

Technologies that affect the weaning rate in beef cattle production systems.

PubMed

Dill, Matheus Dhein; Pereira, Gabriel Ribas; Costa, João Batista Gonçalves; Canellas, Leonardo Canali; Peripolli, Vanessa; Neto, José Braccini; Sant'Anna, Danilo Menezes; McManus, Concepta; Barcellos, Júlio Otávio Jardim

2015-10-01

We investigated the differences between weaning rates and technologies adopted by farmers in cow-calf production systems in Rio Grande do Sul State, Brazil. Interviews were carried out with 73 farmers about 48 technologies that could affect reproductive performance. Data were analyzed by multivariate analysis using a non-hierarchical cluster method. The level of significance was set at P < 0.05. Three distinct clusters of farmers were created (R (2) = 0.90), named as low (LWR), intermediate (IWR), and high (HWR) weaning rate, with 100, 91, and 96 % of the farmers identified within their respective groups and average weaning rates of 59, 72, and 83 %, respectively. IWR and HWR farmers used more improved natural pasture, fixed-time artificial insemination, selection for birth weight, and proteinated salt compared to LWR. HWR farmers used more stocking rate control, and IWR farmers used more ultrasound to evaluate reproductive performance compared to the LWR group. IWR and HWR adopted more technologies related to nutrition and reproductive aspects of the herd in comparison to LWR. We concluded that farmers with higher technology use on farm had higher weaning rates which could be used to benefit less efficient farmers.

Growth, productivity, and relative extinction risk of a data-sparse devil ray

PubMed Central

Pardo, Sebastián A.; Kindsvater, Holly K.; Cuevas-Zimbrón, Elizabeth; Sosa-Nishizaki, Oscar; Pérez-Jiménez, Juan Carlos; Dulvy, Nicholas K.

2016-01-01

Devil rays (Mobula spp.) face intensifying fishing pressure to meet the ongoing international demand for gill plates. The paucity of information on growth, mortality, and fishing effort for devil rays make quantifying population growth rates and extinction risk challenging. Furthermore, unlike manta rays (Manta spp.), devil rays have not been listed on CITES. Here, we use a published size-at-age dataset for the Spinetail Devil Ray (Mobula japanica), to estimate somatic growth rates, age at maturity, maximum age, and natural and fishing mortality. We then estimate a plausible distribution of the maximum intrinsic population growth rate (rmax) and compare it to 95 other chondrichthyans. We find evidence that larger devil ray species have low somatic growth rate, low annual reproductive output, and low maximum population growth rates, suggesting they have low productivity. Fishing rates of a small-scale artisanal Mexican fishery were comparable to our estimate of rmax, and therefore probably unsustainable. Devil ray rmax is very similar to that of manta rays, indicating devil rays can potentially be driven to local extinction at low levels of fishing mortality and that a similar degree of protection for both groups is warranted. PMID:27658342

Microbial Electrosynthesis and Anaerobic Fermentation: An Economic Evaluation for Acetic Acid Production from CO2 and CO.

PubMed

Christodoulou, Xenia; Velasquez-Orta, Sharon B

2016-10-18

Microbial electrosynthesis (MES) and anaerobic fermentation (AF) are two biological processes capable of reducing CO 2 , CO, and water into acetic acid, an essential industrial reagent. In this study, we evaluated investment and production costs of acetic acid via MES and AF, and compared them to industrial chemical processes: methanol carbonylation and ethane direct oxidation. Production and investment costs were found high-priced for MES (1.44 £/kg, 1770 £/t) and AF (4.14 £/kg, 1598 £/t) because of variable and fixed costs and low production yields (100 t/y) compared to methanol carbonylation (0.26 £/kg, 261 £/t) and ethane direct oxidation (0.11 £/kg, 258 £/t). However, integrating AF with MES would reduce the release of CO 2 , double production rates (200 t/y), and decrease investment costs by 9% (1366 £/t). This resulted into setting the production costs at 0.24 £/kg which is currently market competitive (0.48 £/kg). This economically feasible bioprocess produced molar flow rates of 4550 mol per day from MES and AF independently. Our findings offer a bright opportunity toward the use and scale-up of MES and AF for an economically viable acetic acid production process.

Copper effects on bacterial activity of estuarine silty sediments

NASA Astrophysics Data System (ADS)

Almeida, Adelaide; Cunha, Ângela; Fernandes, Sandra; Sobral, Paula; Alcântara, Fernanda

2007-07-01

Bacteria of silty estuarine sediments were spiked with copper to 200 μg Cu g -1 dry weight sediment in order to assess the impact of copper on bacterial degradation of organic matter and on bacterial biomass production. Bacterial density was determined by direct counting under epifluorescence microscopy and bacterial production by the incorporation of 3H-Leucine. Leucine turnover rate was evaluated by 14C-leucine incorporation and ectoenzymatic activities were estimated as the hydrolysis rate of model substrates for β-glucosidase and leucine-aminopeptidase. The presence of added copper in the microcosms elicited, after 21 days of incubation, generalised anoxia and a decrease in organic matter content. The non-eroded surface of the copper-spiked sediment showed, when compared to the control, a decrease in bacterial abundance and significant lower levels of bacterial production and of leucine turnover rate. Bacterial production and leucine turnover rate decreased to 1.4% and 13% of the control values, respectively. Ectoenzymatic activities were also negatively affected but by smaller factors. After erosion by the water current in laboratory flume conditions, the eroded surface of the control sediment showed a generalised decline in all bacterial activities. The erosion of the copper-spiked sediment showed, however, two types of responses with respect to bacterial activities at the exposed surface: positive responses of bacterial production and leucine turnover rate contrasting with slight negative responses of ectoenzymatic activities. The effects of experimental erosion in the suspended cells were also different in the control and in the copper-spiked sediment. Bacterial cells in the control microcosm exhibited, when compared to the non-eroded sediment cells, decreases in all activities after the 6-h suspension. The response of the average suspended copper-spiked sediment cell differed from the control by a less sharp decrease in ectoenzymatic activities and, mainly, by the great intensification of bacterial biomass production and leucine turnover rate. We conclude that the bacterial community of silty estuarine sediments seems to withstand considerable concentrations of copper at the cost of reduced bacterial organic matter degradation and of the almost halting of bacterial production. The toxic effects elicited by copper on protein and carbohydrate degradation were not rapidly repaired by erosion and oxygenation of the sediment cells but, in contrast, bacterial biomass production and leucine turnover were rapidly and efficiently reactivated.

Time reversibility and nonequilibrium thermodynamics of second-order stochastic processes.

PubMed

Ge, Hao

2014-02-01

Nonequilibrium thermodynamics of a general second-order stochastic system is investigated. We prove that at steady state, under inversion of velocities, the condition of time reversibility over the phase space is equivalent to the antisymmetry of spatial flux and the symmetry of velocity flux. Then we show that the condition of time reversibility alone cannot always guarantee the Maxwell-Boltzmann distribution. Comparing the two conditions together, we find that the frictional force naturally emerges as the unique odd term of the total force at thermodynamic equilibrium, and is followed by the Einstein relation. The two conditions respectively correspond to two previously reported different entropy production rates. In the case where the external force is only position dependent, the two entropy production rates become one. We prove that such an entropy production rate can be decomposed into two non-negative terms, expressed respectively by the conditional mean and variance of the thermodynamic force associated with the irreversible velocity flux at any given spatial coordinate. In the small inertia limit, the former term becomes the entropy production rate of the corresponding overdamped dynamics, while the anomalous entropy production rate originates from the latter term. Furthermore, regarding the connection between the first law and second law, we find that in the steady state of such a limit, the anomalous entropy production rate is also the leading order of the Boltzmann-factor weighted difference between the spatial heat dissipation densities of the underdamped and overdamped dynamics, while their unweighted difference always tends to vanish.

The structure and productivity of the Thalassia testudinum community in Bon Accord Lagoon, Tobago.

PubMed

Juman, Rahanna A

2005-05-01

The Thalassia testudinum dominated seagrass community in the Buccoo Reef/ Bon Accord Lagoon Marine Park, measures 0.5 km(2) and is part of a contiguous coral reef, seagrass bed and mangrove swamp system in southwest Tobago. 7 testudinum coverage, productivity and percent turnover rates were measured from February 1998 to February 1999 at four sample locations, while total T. testudinum biomass was measured at two locations in the lagoon from 1992-2002. Productivity and turnover rates varied spatially and seasonally. They were higher in the back-reef area than in the mangrove-fringed lagoon, and were lowest at locations near to a sewage outfall. 7 testudinum coverage ranged from 6.6% in the lagoon to 68.5% in the back-reef area while productivity ranged from 3.9 to 4.9 g dry wt m(-2) d(-1) . Productivity and percentage turnover rates were higher in the dry season (January-June) than in the wet season (July-December). Productivity ranged from 3.0 in the wet season to 5.0 g dry wt m2 d-' in the dry season while percentage turnover rates ranged from 4.2% to 5.6%. Total Thalassia biomass and productivity in Bon Accord Lagoon were compared to six similar sites in the Caribbean that also participate in the Caribbean Coastal Marine Productivity Program (CARICOMP). This seagrass community is being negatively impacted by nutrient-enriched conditions.

Production cost analysis of Euphorbia lathyris. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendel, D.A.; Schooley, F.A.; Dickenson, R.L.

1979-08-01

The purpose of SRI's study was to estimate the costs of producing Euphorbia in commercial quantities in five regions of the United States, which include both irrigated and nonirrigated areas. The study assumed that a uniform crop yield could be achieved in the five regions by varying the quantities of production inputs. Therefore, the production costs estimates, which are based on fourth quarter 1978 dollars, include both fixed and variable costs for each region. Doane's Machinery Custom Rates for 1978 were used to estimate all variable costs except materials, which were estimated separately. Custom rates are determined by members ofmore » the Doane Countywide Farm Panel, a group of farmers specifically selected to represent the various sizes and types of commercial farms found throughout the country. The rates reported are the most recent rates the panel members had either paid, charged, or known for certain a second party had paid or charged. Custom rates for any particular operation include equipment operating costs (fuel, lubrication, and repairs), equipment ownership costs (depreciation, taxes, interest), as well as a labor charge for the operator. Custom rates are regionally specific and thereby assist the accuracy of this analysis. Fixed costs include land, management, and transportation of the plant material to a conversion facility. When appropriate, fixed costs were regionally specific. Changes in total production costs over future time periods were not addressed. The total estimated production costs of Euphorbia in each region were compared with production costs for corn and alfalfa in the same regions. Finally, the effects on yield and costs of changes in the production inputs were estimated.« less

Effect of pH and dilution rate on specific production rate of extra cellular metabolites by Lactobacillus salivarius UCO_979C in continuous culture.

PubMed

Valenzuela, Javier Ferrer; Pinuer, Luis; Cancino, Apolinaria García; Yáñez, Rodrigo Bórquez

2015-08-01

The effect of pH and dilution rate on the production of extracellular metabolites of Lactobacillus salivarius UCO_979 was studied. The experiments were carried out in continuous mode, with chemically defined culture medium at a temperature of 37 °C, 200 rpm agitation and synthetic air flow of 100 ml/min. Ethanol, acetic acid, formic acid, lactic acid and glucose were quantified through HPLC, while exopolysaccharide (EPS) was extracted with ethanol and quantified through the Dubois method. The results showed no linear trends for the specific production of lactic acid, EPS, acetic acid and ethanol, while the specific glucose consumption and ATP production rates showed linear trends. There was a metabolic change of the strain for dilution rates below 0.3 h(-1). The pH had a significant effect on the metabolism of the strain, which was evidenced by a higher specific glucose consumption and increased production of ATP at pH 6 compared with that obtained at pH 7. This work shows not only the metabolic capabilities of L. salivarius UCO_979C, but also shows that it is possible to quantify some molecules associated with its current use as gastrointestinal probiotic, especially regarding the production of organic acids and EPS.

Effects of industrial and agricultural waste amendment on soil greenhouse gas production in a paddy field in Southeastern China

NASA Astrophysics Data System (ADS)

Wang, Weiqi; Neogi, Suvadip; Lai, Derrick Y. F.; Zeng, Congsheng; Wang, Chun; Zeng, Dongping

2017-09-01

Controlling the production and subsequent emissions of greenhouse gases (GHGs) from paddy fields is crucial to minimize the climatic impacts arising from crop production. The application of chemical or biological amendments is one possible way to limit the production of GHGs in paddy soils. Yet, few existing studies have examined the impacts of applying fertilizers originated from industrial and agricultural wastes on soil GHG production and its governing factors in subtropical paddy fields. In this study, we examined the effects of various agricultural and industrial amendments, including biochar, steel slag, shell slag, gypsum slag, and slag-derived silicate and calcium fertilizers, on the production potential of GHGs in an early paddy field in southeast China. The mean CO2 production rates from soils amended with steel slag as well as silicate and calcium fertilizers were significantly higher than those of the controls by 13.4% and 18.6%, respectively (P < 0.05). Mean soil CH4 production rates from the plots amended with steel slag, biochar, shell slag, and gypsum slag were significantly lower than those of the controls by 42.5%, 36.1%, 60.8%, and 61.8%, respectively (P < 0.05). Meanwhile, we found no significant difference in mean soil N2O production rates between the control and any of the treatments (P > 0.05). Overall, the soil production rate of CO2 was positively correlated with that of CH4 (P < 0.05), but negatively correlated with that of N2O (P < 0.05). When compared to the controls, the ratio of soil CO2:CH4 production increased significantly in the plots receiving biochar, and silicate and calcium fertilizer amendments (P < 0.05), while that of CO2:N2O production increased significantly only in the biochar-amended plots. Soil CH4:N2O production ratio decreased significantly in the plots amended with steel slag and gypsum slag, as compared to the controls (P < 0.05). Our results suggest that the application of biochar, shell slag and gypsum slag would help reduce greenhouse gas production and mitigate climate change impacts of rice cultivation, largely attributable to the reduction in methanogenesis.

A Prediction Formula for Double Product in Pregnancy.

PubMed

Teli, Anita; Bagali, Shrilaxmi; Ghatanatti, Ravi

2016-02-01

Maternal cardiovascular changes in pregnancy are numerous and increase in double product throughout pregnancy is the part of the same process. Double product is a cardinal surrogate of the myocardial oxygen demand and cardiac workload. It is the product of heart rate and systolic blood pressure and an important determinant of cardiovascular risk in hypertensive patients. This study was intended to determine the double product by comparing normal individuals with different trimesters of pregnancy. A cross sectional study was conducted in 220 healthy women in the age range of 18-35 years with 60 subjects each in 1(st), 2(nd) and 3(rd) trimesters and 40 non pregnant subjects as control group. Cardiovascular parameters were recorded in both the groups. Statistical analysis was done by comparison of parameters using one-way ANOVA and post-hoc by Tukey-Krammer test. Correlation of double product and weeks of pregnancy was done using Pearson's correlation. Regression analysis was done to know the predictor of double product. It was observed that there was statistically very highly significant increase (p=0.000) in the double product throughout the pregnancy and duration of pregnancy was found to be the predictor of the product. The increase in the double product is due to increase in heart rate and stroke volume. Double product is the useful predictor for early identification of preeclampsia and acute myocardial infarction in pregnant women when compared to normal non- pregnant women and hence helps in the early management of complications.

Acceptance of two US Department of Agriculture commodity whole-grain products: a school-based study in Texas and Minnesota.

PubMed

Chu, Yen Li; Warren, Cynthia A; Sceets, Christine E; Murano, Peter; Marquart, Len; Reicks, Marla

2011-09-01

Whole-grain intake among children and adolescents is below national recommendations, prompting efforts to increase intake in schools. The purpose of this study was to compare the acceptance of whole-grain pancakes and tortillas to refined grain counterparts when served as part of the school meal. Data were collected at 10 schools in Minnesota and seven schools in Texas during the Spring and Fall semesters of 2009. Three pancake and two tortilla products of varying red or white whole-wheat flour content were each served an average of four times per school. Aggregate plate waste was collected and percent consumption used to assess acceptance. Students rated each product on overall liking, taste, color, and softness on 5-point (elementary schools) or 9-point hedonic scales (middle and high schools). Analysis of covariance was used to compare intake and rating scores of all products. For all children, intake of whole-grain products was substantial (percent consumption ranging from 67% to 75%). No differences were noted in consumption of whole-wheat pancakes compared to refined wheat pancakes, while consumption of whole-wheat tortillas was lower than refined products. In elementary schools, overall liking scores of pancakes made with red whole-wheat and both types of whole-wheat tortillas were lower than refined products. However, in middle and high schools, overall liking scores of 100% red whole-wheat pancakes and 66% white whole-wheat tortillas were similar to refined products. Substituting refined grain with whole-grain options represents a viable approach to increasing consumption of whole-grain products in schools. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

Measuring Creative Capacity in Gifted Students: Comparing Teacher Ratings and Student Products

ERIC Educational Resources Information Center

Kettler, Todd; Bower, Janessa

2017-01-01

Creativity and giftedness are frequently associated, and schools may use measures of creativity for identifying gifted and talented students. The researchers examined three aspects of elementary student creativity: (a) the relationship between a teacher's rating of student creativity and rubric-scored student writing samples, (b) group differences…

40 CFR 1037.115 - Other requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... rate by multiplying it by the global warming potential of your refrigerant and dividing the product by 1430 (which is the global warming potential of HFC-134a). Apply this adjustment before comparing your leakage rate to the standard. Determine global warming potentials consistent with 40 CFR 86.1866. Note...

40 CFR 1037.115 - Other requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... rate by multiplying it by the global warming potential of your refrigerant and dividing the product by 1430 (which is the global warming potential of HFC-134a). Apply this adjustment before comparing your leakage rate to the standard. Determine global warming potentials consistent with 40 CFR 86.1866. Note...

Direct measurement of neon production rates by (α,n) reactions in minerals

NASA Astrophysics Data System (ADS)

Cox, Stephen E.; Farley, Kenneth A.; Cherniak, Daniele J.

2015-01-01

The production of nucleogenic neon from alpha particle capture by 18O and 19F offers a potential chronometer sensitive to temperatures higher than the more widely used (U-Th)/He chronometer. The accuracy depends on the cross sections and the calculated stopping power for alpha particles in the mineral being studied. Published 18O(α,n)21Ne production rates are in poor agreement and were calculated from contradictory cross sections, and therefore demand experimental verification. Similarly, the stopping powers for alpha particles are calculated from SRIM (Stopping Range of Ions in Matter software) based on a limited experimental dataset. To address these issues we used a particle accelerator to implant alpha particles at precisely known energies into slabs of synthetic quartz (SiO2) and barium tungstate (BaWO4) to measure 21Ne production from capture by 18O. Within experimental uncertainties the observed 21Ne production rates compare favorably to our predictions using published cross sections and stopping powers, indicating that ages calculated using these quantities are accurate at the ∼3% level. In addition, we measured the 22Ne/21Ne ratio and (U-Th)/He and (U-Th)/Ne ages of Durango fluorapatite, which is an important model system for this work because it contains both oxygen and fluorine. Finally, we present 21Ne/4He production rate ratios for a variety of minerals of geochemical interest along with software for calculating neon production rates and (U-Th)/Ne ages.

Cosmic ray exposure dating with in situ produced cosmogenic 3He: results from young Hawaiian lava flows

USGS Publications Warehouse

Kurz, M.D.; Colodner, D.; Trull, T.W.; Moore, R.B.; O'Brien, K.

1990-01-01

In an effort to determine the in situ production rate of spallation-produced cosmogenic 3He, and evaluate its use as a surface exposure chronometer, we have measured cosmogenic helium contents in a suite of Hawaiian radiocarbon-dated lava flows. The lava flows, ranging in age from 600 to 13,000 years, were collected from Hualalai and Mauna Loa volcanoes on the island of Hawaii. Because cosmic ray surface-exposure dating requires the complete absence of erosion or soil cover, these lava flows were selected specifically for this purpose. The 3He production rate, measured within olivine phenocrysts, was found to vary significantly, ranging from 47 to 150 atoms g-1 yr-1 (normalized to sea level). Although there is considerable scatter in the data, the samples younger than 10,000 years are well-preserved and exposed, and the production rate variations are therefore not related to erosion or soil cover. Data averaged over the past 2000 years indicate a sea-level 3He production rate of 125 ?? 30 atoms g-1 yr-1, which agrees well with previous estimates. The longer record suggests a minimum in sea level normalized 3He production rate between 2000 and 7000 years (55 ?? 15 atoms g-1 yr-1), as compared to samples younger than 2000 years (125 ?? 30 atoms g-1 yr-1), and those between 7000 and 10,000 years (127 ?? 19 atoms g-1 yr-1). The minimum in production rate is similar in age to that which would be produced by variations in geomagnetic field strength, as indicated by archeomagnetic data. However, the production rate variations (a factor of 2.3 ?? 0.8) are poorly determined due to the large uncertainties in the youngest samples and questions of surface preservation for the older samples. Calculations using the atmospheric production model of O'Brien (1979) [35], and the method of Lal and Peters (1967) [11], predict smaller production rate variations for similar variation in dipole moment (a factor of 1.15-1.65). Because the production rate variations, archeomagnetic data, and theoretical estimates are not well determined at present, the relationship between dipole moment and production rate will require further study. Precise determination of the production rate is an important uncertainty in the surface-exposure technique, but the data demonstrate that it is feasible to date samples as young as 600 years of age providing that there has been no erosion or soil cover. Therefore, the technique will have important applications for volcanology, glacial geology, geomorphology and archaeology. ?? 1990.

Observations and analysis of O(1D) and NH2 line profiles for the coma of comet P/Halley

NASA Technical Reports Server (NTRS)

Smyth, William H.; Combi, Michael R.; Roesler, Fred L.; Scherb, Frank

1995-01-01

A set of high-resolution Fabry-Perot measurements of the coma of comet P/Halley was acquired in the (O I) 6300 A and NH2 6298.62 A emission lines. These high-resolution measurements provide the first optical observations capable of studying directly the photochemical kinetics and dynamic outflow of the coma. The observations were analyzed by a Monte Carlo Particle Trajectory Model. The agreement of the model and observed line profiles was excellent and verified the underlying dynamics, exothermic photodissociative chemistry, and collisional thermalization in the coma. The somewhat wider intrinsic line profile width for the O(1D) emission in 1986 January compared to 1986 May, is, for example, produced by the larger outflow speeds and gas temperatures nearer perihelion in January. The January O(1D) profile, which is wider than the January NH2 profile, is indicative of the photochemical kinetics in the dissociation of the parent molecules H2O and OH in the coma. The absolute calibration of the observations in 1986 January allowed the production rates for H2O and the NH2-parent molecules to be determined. The average daily water production rates derived from the O(1D) emission data for January 16 and 17 are presented. These very large water production rates are consistent with the extrapolated (and 7.6 day time variable) water production rates determined from the analysis of lower spectral resolution observations for O(1D) and H-alpha emissions that covered the time period up to January 13. The large production rates on January 16 and 17 establish that the maximum water production rate for comet Halley accurred pre-perihelion in January. Implications drawn from comparison with 18 cm radio emission data in January suggest that the peak water production rate was even larger. The average production rate for NH3 determined from the NH2 emission data for January 17 was (1.48 +/- 0.10) x 10(exp 28) molecules/s, yielding an NH3/H2O production rate ratio of 0.55%.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standardmore » LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.« less

Methane Gas Emissions - is Older Infrastructure Leakier?

NASA Astrophysics Data System (ADS)

Wendt, L. P.; Caulton, D.; Zondlo, M. A.; Lane, H.; Lu, J.; Golston, L.; Pan, D.

2015-12-01

Large gains in natural gas production from hydraulic fracturing is reinvigorating the US energy economy. It is a clean burning fuel with lower emissions than that of coal or oil. Studies show that methane (CH4) leaks from natural gas infrastructure vary widely. A broader question is whether leak rates of methane might offset the benefits of combustion of natural gas. Excess methane (CH4) is a major greenhouse gas with a radiative forcing constant of 25 times that of CO2 when projected over a 100-year period. An extensive field study of 250 wells in the Marcellus Shale conducted in July 2015 examined the emission rates of this region and identifed super-emitters. Spud production data will provide information as to whether older infrastructure is responsible for more of the emissions. Quantifying the emission rate was determined by extrapolating methane releases at a distance from private well pads using an inverse Gaussian plume model. Wells studied were selected by prevailing winds, distance from public roads, and topographical information using commercial (ARCGIS and Google Earth), non-profit (drillinginfo), and government (State of PA) databases. Data were collected from the mobile sensing lab (CH4, CO2 and H2O sensors), as well as from a stationary tower. Emission rates from well pads will be compared to their original production (spud dates) to evaluate whether infrastructure age and total production correlates with the observed leak rates. Very preliminary results show no statistical correlation between well pad production rates and observed leak rates.

Effects of carbonyl bond, metal cluster dissociation, and evaporation rates on predictions of nanotube production in high-pressure carbon monoxide

NASA Technical Reports Server (NTRS)

Scott, Carl D.; Smalley, Richard E.

2003-01-01

The high-pressure carbon monoxide (HiPco) process for producing single-wall carbon nanotubes (SWNTs) uses iron pentacarbonyl as the source of iron for catalyzing the Boudouard reaction. Attempts using nickel tetracarbonyl led to no production of SWNTs. This paper discusses simulations at a constant condition of 1300 K and 30 atm in which the chemical rate equations are solved for different reaction schemes. A lumped cluster model is developed to limit the number of species in the models, yet it includes fairly large clusters. Reaction rate coefficients in these schemes are based on bond energies of iron and nickel species and on estimates of chemical rates for formation of SWNTs. SWNT growth is measured by the conformation of CO2. It is shown that the production of CO2 is significantly greater for FeCO because of its lower bond energy as compared with that of NiCO. It is also shown that the dissociation and evaporation rates of atoms from small metal clusters have a significant effect on CO2 production. A high rate of evaporation leads to a smaller number of metal clusters available to catalyze the Boudouard reaction. This suggests that if CO reacts with metal clusters and removes atoms from them by forming MeCO, this has the effect of enhancing the evaporation rate and reducing SWNT production. The study also investigates some other reactions in the model that have a less dramatic influence.

Effects of Carbonyl Bond and Metal Cluster Dissociation and Evaporation Rates on Predictions of Nanotube Production in HiPco

NASA Technical Reports Server (NTRS)

Scott, Carl D.; Smalley, Richard E.

2002-01-01

The high-pressure carbon monoxide (HiPco) process for producing single-wall carbon nanotubes (SWNT) uses iron pentacarbonyl as the source of iron for catalyzing the Boudouard reaction. Attempts using nickel tetracarbonyl led to no production of SWNTs. This paper discusses simulations at a constant condition of 1300 K and 30 atm in which the chemical rate equations are solved for different reaction schemes. A lumped cluster model is developed to limit the number of species in the models, yet it includes fairly large clusters. Reaction rate coefficients in these schemes are based on bond energies of iron and nickel species and on estimates of chemical rates for formation of SWNTs. SWNT growth is measured by the co-formation of CO2. It is shown that the production of CO2 is significantly greater for FeCO due to its lower bond energy as compared with that ofNiCO. It is also shown that the dissociation and evaporation rates of atoms from small metal clusters have a significant effect on CO2 production. A high rate of evaporation leads to a smaller number of metal clusters available to catalyze the Boudouard reaction. This suggests that if CO reacts with metal clusters and removes atoms from them by forming MeCO, this has the effect of enhancing the evaporation rate and reducing SWNT production. The study also investigates some other reactions in the model that have a less dramatic influence.

Production, fertility, survival, and body measurements of Montbéliarde-sired crossbreds compared with pure Holsteins during their first 5 lactations.

PubMed

Hazel, A R; Heins, B J; Seykora, A J; Hansen, L B

2014-01-01

Two-breed crossbreds of Montbéliarde and Holstein (MO × HO) as well as 3-breed crossbreds of Montbéliarde and Jersey/Holstein (MO × JH) were compared with pure Holstein (HO) cows for production, somatic cell score (SCS), fertility, survival to subsequent calving, mortality, and body measurements during their first 5 lactations. Cows calved for the first time between 2005 and 2010 and were housed in either a confinement herd or a herd that had access to pasture for 165d of the year in the north central region of the United States. Body, hoof, and udder measurements of cows were also objectively measured. The MO × HO crossbred cows were not different from pure HO cows for fat-plus-protein production during any lactation. However, the MO × JH crossbred cows had 5% lower fat-plus-protein production compared with pure HO cows in the confinement herd. On the other hand, the MO × JH crossbred cows were not different for fat-plus-protein production in the third to fifth lactation compared with pure HO cows in the seasonal pasture herd. Across the 2 herds, the MO × HO and MO × JH crossbred cows had 21% higher first-service conception rate, 41 fewer days open, and 12% higher pregnancy rate compared with the pure HO cows. Furthermore, the MO × HO (5%) and MO × JH (12%) crossbred cows had lower mortality rates than the pure HO cows (18%). Because of superior fertility and lower mortality rates, the MO × HO and MO × JH crossbred cows, combined, had greater survival to second (+13%), third (+24%), fourth (+25%), and fifth (+17%) lactation compared with pure HO cows. For body measurements, MO × HO were similar to pure HO cows for hip height and heart girth, but MO × HO cows had more body condition and greater body weight (+39kg) across the first 5 lactations. The MO × JH cows had more body condition but 5cm shorter hip height and 28kg less body weight than pure HO cows across the first 5 lactations. Foot angle was steeper and hoof length was shorter for MO × HO cows, but MO × JH cows were similar to pure HO cows for hoof measurements. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Ten-year growth in the scientific production of Brazilian Psychiatry: the impact of the new evaluation policies.

PubMed

Gerolin, Jerônimo; Bressan, Rodrigo A; Pietrobon, Ricardo; Mari, Jair de Jesus

2010-03-01

Developed by the Ministry of Education, the Qualis evaluation criteria have strongly impacted the scientific production of Post-Graduation Programs. A new set of more stringent criteria has been proposed for Qualis. Our aim was to evaluate the impact of the new Qualis criteria on the scientific production of Post-Graduation Programs in psychiatry over the last 10 years. We extracted data from annual reports published between 1998 and 2008, and compared performance measured in terms of the old Qualis rating criteria and the new set of criteria. There was a 25% increase in the number of Information Science Institute-indexed articles in the second five-year period, which rose from 1,213 to 1,518. While, according to the old Qualis criteria, 84% of the Information Science Institute production would have been classified as highly-rated (IF > 1), only 17% of the papers were classified as highly-rated (A1) according to the new Qualis rating criteria. Most papers (65%) were assigned to intermediate categories (B1 and B2) with an IF < 2.29. All psychiatric Post-Graduation Programs have increased their production, but by favoring quality over quantity, the new rules have proved to be more useful for discriminating among the scientific production.

Productive responses of breeding Cashmere goats and their kids to different stocking rates on improved upland pastures.

PubMed

Celaya, R; Moreno-Gonzalo, J; López López, C; Ferreira, L M M; García, U; Ferre, I; Osoro, K

2016-03-01

Although goat meat production could be an option for diversification in improved upland pastures in northern Spain, precise information on the optimal grazing management to enhance goat performance and maximize production per unit land area is lacking. The objective of this study was to compare the effects of 3 stocking rates, high stocking rate (HSR; 20 goats/ha), medium stocking rate (MSR; 15 goats/ha), and low stocking rate (LSR; 10 goats/ha), on gastrointestinal (GI) nematode infections and productive responses of Cashmere goats grazing such pastures. Treatments were replicated twice on 6 paddocks sown with and and with a high presence of the native grass . The experiment lasted 3 grazing seasons (from spring to autumn). Pastures were sampled for sward height and botanical and proximate composition. Body weight and BCS changes of goats were monitored and GI nematode infections were assessed by fecal egg counts (FEC). The established treatments resulted in lower mean sward height in the HSR than in the MSR and LSR (9.6, 11.5, and 14.4 cm, respectively; < 0.001). Pasture botanical composition and nutritive quality did not differ between treatments. The mean FEC of does across the 3 grazing seasons were greater ( < 0.05) in the HSR than in the LSR. spp., , and were the most prevalent nematode species identified in coprocultures. Does showed more favorable ( < 0.001) BW and BCS changes in the LSR than in the MSR and HSR (-14, -30, and -52 g/d and -0.1, -0.3, and -0.7 BCS units [scale 1 to 5], respectively). Greater ( < 0.001) kids' BW gains were observed in the LSR and MSR (average 94 g/d) compared with the HSR (70 g/d). Inversely, kid output per unit land area was greater in the HSR than in the MSR and LSR (320, 258, and 192 kg∙ha∙yr, respectively; < 0.001), whereas daily kids' BW gains per hectare were greater ( < 0.001) in the HSR and MSR (average 1.37 kg∙d∙ha) compared with the LSR (0.98 kg∙d∙ha). A medium stocking rate of 15 goats/ha could represent the best compromise between animal health, performance, and productivity per unit land area in this type of upland pastures, but stricter controls of parasite levels during the grazing season would be necessary to avoid production losses, unless alternative nutraceuticals are provided.

Bacterial and primary production in the Greenland Sea

NASA Astrophysics Data System (ADS)

Børsheim, Knut Yngve

2017-12-01

Bacterial production rates were measured in water profiles collected in the Greenland Sea and adjacent areas. Hydrography and nutrients throughout the water column were measured along 75°N from 12°W to 10°E at 20 km distance intervals. Net primary production rates from satellite sensed data were compared with literature values from 14C incubations and used for regional and seasonal comparisons. Maximum bacterial production rates were associated with the region close to the edge of the East Greenland current, and the rates decreased gradually towards the center of the Greenland Sea central gyre. Integrated over the upper 20 m the maximum bacterial production rate was 17.9 mmol C m- 2 day- 1, and east of the center of the gyre the average integrated rate was 4.6 mmol C m- 2 day- 1. It is hypothesized that high bacterial production rates in the western Greenland Sea were sustained by organic material carried from the Arctic Ocean by the East Greenland Current. The depth profiles of nitrate and phosphate were very similar both sides of the Arctic front, with 2% higher values between 500 m and 2000 m in the Arctic domain, and a N/P ratio of 13.6. The N/Si ratio varied by depth and region, with increasing silicate depletion from 1500 m depth to the surface. The rate of depletion from 1500 m depth to surface in the Atlantic domain was twice as high as in the Arctic domain. Net primary production rates in the area between the edge of the East Greenland current and the center of the Greenland Sea gyre was 96 mmol C m- 2 day- 1 at the time of the expedition in 2006, and 78 mmol C m- 2 day- 1 east of the center including the Atlantic domain. Annual net primary production estimated from satellite data in the Greenland Sea increased substantially in the period between 2003 and 2016, and the rate of increase was lowest close to the East Greenland Current.

Ultrasound assisted lipase catalyzed synthesis of poly-6-hydroxyhexanoate.

PubMed

Gumel, A M; Annuar, M S M; Chisti, Y; Heidelberg, T

2012-05-01

Ultrasonic irradiation greatly improved the Candida antarctica lipase B mediated ring opening polymerization of ε-caprolactone to poly-6-hydroxyhexanoate in the ionic liquid 1-ethyl-3-methylimidazolium tetraflouroborate. Compared to the conventional nonsonicated reaction, sonication improved the monomer conversion by 63% and afforded a polymer product of a narrower molecular weight distribution and a higher degree of crystallinity. Under sonication, the polydispersity index of the product was ~1.44 compared to a value of ~2.55 for the product of the conventional reaction. With sonication, nearly 75% of the monomer was converted to product, but the conversion was only ~16% for the reaction carried out conventionally. Compared to conventional operation, sonication enhanced the rate of polymer propagation by >2-fold and the turnover number of the lipase by >3-fold. Copyright © 2011 Elsevier B.V. All rights reserved.

Nitrogen uptake by phytoplankton in surface waters of the Indian sector of Southern Ocean during austral summer

NASA Astrophysics Data System (ADS)

Tripathy, S. C.; Patra, Sivaji; Vishnu Vardhan, K.; Sarkar, A.; Mishra, R. K.; Anilkumar, N.

2018-03-01

This study reports the nitrogen uptake rate (using 15N tracer) of phytoplankton in surface waters of different frontal zones in the Indian sector of the Southern Ocean (SO) during austral summer of 2013. The investigated area encompasses four major frontal systems, i.e., the subtropical front (STF), subantarctic front (SAF), polar front-1 (PF1) and polar front-2 (PF2). Southward decrease of surface water temperature was observed, whereas surface salinity did not show any significant trend. Nutrient (NO3 - and SiO4 4-) concentrations increased southward from STF to PF; while ammonium (NH4 +), nitrite (NO2 -) and phosphate (PO4 3-) remained comparatively stable. Analysis of nutrient ratios indicated potential N-limited conditions at the STF and SAF but no such scenario was observed for PF. In terms of phytoplankton biomass, PF1 was found to be the most productive followed by SAF, whereas PF2 was the least productive region. Nitrate uptake rate increased with increasing latitude, as no systematic spatial variation was discerned for NH4 + and urea (CO(NH2)2). Linear relationship between nitrate and total N-uptake reveals that the studied area is capable of exporting up to 60% of the total production to the deep ocean if the environmental settings are favorable. Like N-uptake rates the f-ratio also increased towards PF region indicating comparatively higher new production in the PF than in the subtropics. The moderately high average f-ratio (0.53) indicates potentially near equal contributions by new production and regenerated production to the total productivity in the study area. Elevation in N-uptake rates with declining temperature suggests that the SO with its vast quantity of cool water could play an important role in drawing down the atmospheric CO2 through the "solubility pump".

Ultrasound assisted biogas production from landfill leachate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oz, Nilgün Ayman, E-mail: nilgunayman@comu.edu.tr; Yarimtepe, Canan Can

Highlights: • Effect of low frequency ultrasound pretreatment on leachate was investigated. • Three different ultrasound energy inputs (200, 400 and 600 W/l) was applied. • Low-frequency ultrasound treatment increased soluble COD in landfill leachate. • Application of ultrasound to leachate increased biogas production about 40%. • Application of ultrasound to leachate increased total methane production rate about 20%. - Abstract: The aim of this study is to increase biogas production and methane yield from landfill leachate in anaerobic batch reactors by using low frequency ultrasound as a pretreatment step. In the first part of the study, optimum conditions formore » solubilization of organic matter in leachate samples were investigated using various sonication durations at an ultrasound frequency of 20 kHz. The level of organic matter solubilization during ultrasonic pretreatment experiments was determined by calculating the ratio of soluble chemical oxygen demand (sCOD) to total chemical oxygen demand (tCOD). The sCOD/tCOD ratio was increased from 47% in raw leachate to 63% after 45 min sonication at 600 W/l. Non-parametric Friedman’s test indicated that ultrasonic pretreatment has a significant effect on sCOD parameter for leachate (p < 0.05). In the second part of the study, anaerobic batch reactors were operated for both ultrasonically pretreated and untreated landfill leachate samples in order to assess the effect of sonication on biogas and methane production rate. In anaerobic batch reactor feed with ultrasonically pretreated leachate, 40% more biogas was obtained compared to the control reactor. For statistical analysis, Mann–Whitney U test was performed to compare biogas and methane production rates for raw and pretreated leachate samples and it has been found that ultrasonic pretreatment significantly enhanced biogas and methane production rates from leachate (p < 0.05) in anaerobic batch reactors. The overall results showed that low frequency ultrasound pretreatment can be potentially used for wastewater management especially with integration of anaerobic processes.« less

Switch-backs associated with generic drugs approved using product-specific determinations of therapeutic equivalence.

PubMed

Gagne, Joshua J; Polinski, Jennifer M; Jiang, Wenlei; Dutcher, Sarah K; Xie, Jing; Lii, Joyce; Fulchino, Lisa A; Kesselheim, Aaron S

2016-08-01

US Food and Drug Administration approval for generic drugs relies on demonstrating pharmaceutical equivalence and bioequivalence; however, some drug products have unique attributes that necessitate product-specific approval pathways. We evaluated rates of patients' switching back to brand-name versions from generic versions of four drugs approved via such approaches. We used data from Optum LifeSciences Research Database to identify patients using a brand-name version of a study drug (acarbose tablets, salmon calcitonin nasal spray, enoxaparin sodium injection, and venlafaxine extended release tablets) or a control drug. We followed patients to identify switching to generic versions and then followed those who switched to identify whether they switched back to brand-name versions. We calculated switch and switch-back rates and used Kaplan-Meier and log-rank tests to compare rates between study and control drugs. Our cohort included 201 959 eligible patients. Brand-to-generic switch rates ranged from 66 to 106 switches per 100 person-years for study drugs and 80 to 110 for control drugs. Rates of switch-back to brand-name versions ranged from 5 to 37 among study drugs and 3 to 53 among control drugs. Switch-back rates were higher for venlafaxine vs. sertraline (p < 0.01) and calcitonin vs. alendronate (p = 0.01). Switch-back rates were lower for venlafaxine vs. paroxetine (p < 0.01) and acarbose vs. nateglinide (p < 0.01). Rates were similar for acarbose vs. glimepiride (p = 0.97) and for enoxaparin vs. fondiparinux (p = 0.11). As compared to control drugs, patients were not more likely to systematically switch back from generic to brand-name versions of the four study drugs. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Exposure factors for cleaning, automotive care, and surface protection products for exposure assessments.

PubMed

Park, Ji Young; Lim, Miyoung; Yang, Wonho; Lee, Kiyoung

2017-01-01

Accurately measuring the usage patterns of consumer products (CPs) is important to conduct realistic exposure assessments. We determined the exposure factors for 18 consumer products: household bleach, mold stain remover, all-purpose cleaner, washing machine cleaner, air conditioner cleaner, glass cleaner, drain cleaner, adhesive remover, liquid snow chain, tire shine spray, wheel cleaner, rain repellent, car wax spray, leather polish, furniture polish, anti-fog product, fabric waterproofing spray, and rust inhibitor. Field survey staff visited homes and collected product use information via face-to-face interviews. In total, 10,000 participants (5010 men and 4990 women) aged 15 years and older completed the questionnaire. Household bleach had the highest use rate of 47.4% and use rates for the other products ranged from 0.8 to 21.7%. The use rates of many CPs differed by age group and gender. Many household cleaning products were used regularly, but some products, such as air conditioner cleaner and liquid snow chain, were used in specific seasons or for specific purposes; therefore, they were used less frequently compared to cleaning products. These exposure factor data will be useful as input data for exposure and risk assessments and setting safety guidelines. Copyright © 2016 Elsevier Ltd. All rights reserved.

Solar Energy Systems for Lunar Oxygen Generation

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Heller, Richard S.; Wong, Wayne A.; Hepp, Aloysius F.

2010-01-01

An evaluation of several solar concentrator-based systems for producing oxygen from lunar regolith was performed. The systems utilize a solar concentrator mirror to provide thermal energy for the oxygen production process. Thermal energy to power a Stirling heat engine and photovoltaics are compared for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The initial oxygen production method utilized in the analysis is hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process (rate) affected the oxygen production rate. An evaluation of the power requirements for a carbothermal lunar regolith reduction reactor has also been conducted. The reactor had a total power requirement between 8,320 to 9,961 W when producing 1000 kg/year of oxygen. The solar concentrator used to provide the thermal power (over 82 percent of the total energy requirement) would have a diameter of less than 4 m.

Brand logo recognition by children aged 3 to 6 years. Mickey Mouse and Old Joe the Camel.

PubMed

Fischer, P M; Schwartz, M P; Richards, J W; Goldstein, A O; Rojas, T H

1991-12-11

Little is known about the influence of advertising on very young children. We, therefore, measured product logo recognition by subjects aged 3 to 6 years. Children were instructed to match logos with one of 12 products pictured on a game board. Twenty-two logos were tested, including those representing children's products, adult products, and those for two popular cigarette brands (Camel and Marlboro). Preschools in Augusta and Atlanta, Ga. A convenience sample of 229 children attending preschool. The children demonstrated high rates of logo recognition. When analyzed by product category, the level of recognition of cigarette logos was intermediate between children's and adult products. The recognition rates of The Disney Channel logo and Old Joe (the cartoon character promoting Camel cigarettes) were highest in their respective product categories. Recognition rates increased with age. Approximately 30% of 3-year-old children correctly matched Old Joe with a picture of a cigarette compared with 91.3% of 6-year-old children. Very young children see, understand, and remember advertising. Given the serious health consequences of smoking, the exposure of children to environmental tobacco advertising may represent an important health risk and should be studied further.

Isolation and Evaluation of Oil-Producing Microalgae from Subtropical Coastal and Brackish Waters

PubMed Central

Lim, David K. Y.; Garg, Sourabh; Timmins, Matthew; Zhang, Eugene S. B.; Thomas-Hall, Skye R.; Schuhmann, Holger; Li, Yan; Schenk, Peer M.

2012-01-01

Microalgae have been widely reported as a promising source of biofuels, mainly based on their high areal productivity of biomass and lipids as triacylglycerides and the possibility for cultivation on non-arable land. The isolation and selection of suitable strains that are robust and display high growth and lipid accumulation rates is an important prerequisite for their successful cultivation as a bioenergy source, a process that can be compared to the initial selection and domestication of agricultural crops. We developed standard protocols for the isolation and cultivation for a range of marine and brackish microalgae. By comparing growth rates and lipid productivity, we assessed the potential of subtropical coastal and brackish microalgae for the production of biodiesel and other oil-based bioproducts. This study identified Nannochloropsis sp., Dunaniella salina and new isolates of Chlorella sp. and Tetraselmis sp. as suitable candidates for a multiple-product algae crop. We conclude that subtropical coastal microalgae display a variety of fatty acid profiles that offer a wide scope for several oil-based bioproducts, including biodiesel and omega-3 fatty acids. A biorefinery approach for microalgae would make economical production more feasible but challenges remain for efficient harvesting and extraction processes for some species. PMID:22792403

A Comparison of Assessment Methods and Raters in Product Creativity

ERIC Educational Resources Information Center

Lu, Chia-Chen; Luh, Ding-Bang

2012-01-01

Although previous studies have attempted to use different experiences of raters to rate product creativity by adopting the Consensus Assessment Method (CAT) approach, the validity of replacing CAT with another measurement tool has not been adequately tested. This study aimed to compare raters with different levels of experience (expert ves.…

Social values of specialty forest products to rural communities

Treesearch

Marla R. Emery

1999-01-01

Rural communities have long been known for their cultural distinctiveness, independent spirits, and, unfortunately, comparatively high poverty rates. A look at the promotion of Specialty Forest Products (SFP) as a rural development strategy against the backdrop of larger social trends such as welfare reform and economic restructuring suggests the need to ask hard...

Comparison of guinea-pig serum lipoproteins after iodination by two different methods.

PubMed Central

Weech, P K; McTaggart, F; Mills, G L

1978-01-01

1. Guinea-pig low-density lipoproteins were isolated by ultracentrifugation and iodinated either by the IC1 method or by the chloramine-T procedure. 2. The efficiency of labelling by both methods was essentially the same. 3. When the two products were compared by ultracentrifugation, gel chromatography and immunodiffusion analysis, no significant difference in their properties was detected. 4. When they were compared by gradient-gel electrophoresis, aggregates were found in the product of the IC1 method, but not in the lipoprotein iodinated by the chloramine-T process. 5. Both products were metabolized by the guinea pig with essentially the same fractional catabolic rate. 6. The fractional catabolic rate of lipoprotein iodinated by the chloramine-T method was not significantly different from that of lipoprotein biologically labelled in the protein moiety with [75Se]selenomethionine. 7. It is concluded that the products of both methods of iodination are almost equally acceptable, provided that the optimum conditions for the chloramine-T reaction are carefully established. Images Fig. 4. Fig. 5. PMID:206260

Decolorization and biogas production by an anaerobic consortium: effect of different azo dyes and quinoid redox mediators.

PubMed

Alvarez, L H; Valdez-Espinoza, R; García-Reyes, R B; Olivo-Alanis, D; Garza-González, M T; Meza-Escalante, E R; Gortáres-Moroyoqui, P

2015-01-01

The inhibitory effect of azo dyes and quinoid compounds on an anaerobic consortium was evaluated during a decolorization process and biogas production. In addition, the impact of quinoid compounds such as lawsone (LAW) and anthraquinone-2,6-disulfonate (AQDS) on the rate of decolorization of Direct Blue 71 (DB71) was assessed. The anaerobic consortium was not completely inhibited under all tested dye concentrations (0.1-2 mmol l(-1)), evidenced by an active decolorization process and biogas production. The presence of quinoid compounds at different concentrations (4, 8, and 12 mmol l(-1)) also inhibited biogas production compared to the control incubated without the quinoid compounds. In summary, the anaerobic consortium was affected to a greater extent by increasing the quantity of azo dyes or quinoid compounds. Nevertheless, at a lower concentration (1 mmol l(-1)) of quinoid compounds, the anaerobic consortium effectively decolorized 2 mmol l(-1) of DB71, increasing up to 5.2- and 20.4-fold the rate of decolorization with AQDS and LAW, respectively, compared to the control lacking quinoid compounds.

Quantifying methane emissions from natural gas production in north-eastern Pennsylvania

NASA Astrophysics Data System (ADS)

Barkley, Zachary R.; Lauvaux, Thomas; Davis, Kenneth J.; Deng, Aijun; Miles, Natasha L.; Richardson, Scott J.; Cao, Yanni; Sweeney, Colm; Karion, Anna; Smith, MacKenzie; Kort, Eric A.; Schwietzke, Stefan; Murphy, Thomas; Cervone, Guido; Martins, Douglas; Maasakkers, Joannes D.

2017-11-01

Natural gas infrastructure releases methane (CH4), a potent greenhouse gas, into the atmosphere. The estimated emission rate associated with the production and transportation of natural gas is uncertain, hindering our understanding of its greenhouse footprint. This study presents a new application of inverse methodology for estimating regional emission rates from natural gas production and gathering facilities in north-eastern Pennsylvania. An inventory of CH4 emissions was compiled for major sources in Pennsylvania. This inventory served as input emission data for the Weather Research and Forecasting model with chemistry enabled (WRF-Chem), and atmospheric CH4 mole fraction fields were generated at 3 km resolution. Simulated atmospheric CH4 enhancements from WRF-Chem were compared to observations obtained from a 3-week flight campaign in May 2015. Modelled enhancements from sources not associated with upstream natural gas processes were assumed constant and known and therefore removed from the optimization procedure, creating a set of observed enhancements from natural gas only. Simulated emission rates from unconventional production were then adjusted to minimize the mismatch between aircraft observations and model-simulated mole fractions for 10 flights. To evaluate the method, an aircraft mass balance calculation was performed for four flights where conditions permitted its use. Using the model optimization approach, the weighted mean emission rate from unconventional natural gas production and gathering facilities in north-eastern Pennsylvania approach is found to be 0.36 % of total gas production, with a 2σ confidence interval between 0.27 and 0.45 % of production. Similarly, the mean emission estimates using the aircraft mass balance approach are calculated to be 0.40 % of regional natural gas production, with a 2σ confidence interval between 0.08 and 0.72 % of production. These emission rates as a percent of production are lower than rates found in any other basin using a top-down methodology, and may be indicative of some characteristics of the basin that make sources from the north-eastern Marcellus region unique.

Laser flash photolysis of ozone - O/1D/ quantum yields in the fall-off region 297-325 nm

NASA Technical Reports Server (NTRS)

Brock, J. C.; Watson, R. T.

1980-01-01

The wavelength dependence of the quantum yield for O(1D) production from ozone photolysis has been determined between 297.5 nm and 325 nm in order to resolve serious discrepancies among previous studies. The results of this investigation are compared to earlier work by calculating atmospheric production rate constants for O(1D). It is found that for the purpose of calculating this rate constant, there is now good agreement among three studies at 298 K. Furthermore, it appears that previous data on the temperature dependence of the O(1D) quantum yield fall-off is adequate for determining the vertical profile of the O(1D) production rate constant. Several experimental difficulties associated with using NO2(asterisk) chemiluminescence to monitor O(1D) have been identified.

Comparison between Nintendo Wii Fit aerobics and traditional aerobic exercise in sedentary young adults.

PubMed

Douris, Peter C; McDonald, Brittany; Vespi, Frank; Kelley, Nancy C; Herman, Lawrence

2012-04-01

Exergaming is becoming a popular recreational activity for young adults. The purpose was to compare the physiologic and psychological responses of college students playing Nintendo Wii Fit, an active video game console, vs. an equal duration of moderate-intensity brisk walking. Twenty-one healthy sedentary college-age students (mean age 23.2 ± 1.8 years) participated in a randomized, double cross-over study, which compared physiologic and psychological responses to 30 minutes of brisk walking exercise on a treadmill vs. 30 minutes playing Nintendo Wii Fit "Free Run" program. Physiologic parameters measured included heart rate, rate pressure product, respiratory rate, and rating of perceived exertion. Participants' positive well-being, psychological distress, and level of fatigue associated with each exercise modality were quantified using the Subjective Exercise Experience Scale. The mean maximum heart rate (HRmax) achieved when exercising with Wii Fit (142.4 ± 20.5 b·min(-1)) was significantly greater (p = 0.001) compared with exercising on the treadmill (123.2 ± 13.7 b·min(-1)). Rate pressure product was also significantly greater (p = 0.001) during exercise on the Wii Fit. Participants' rating of perceived exertion when playing Wii Fit (12.7 ± 3.0) was significantly greater (p = 0.014) when compared with brisk walking on the treadmill (10.1 ± 3.3). However, psychologically when playing Wii Fit, participants' positive well-being decreased significantly (p = 0.018) from preexercise to postexercise when compared with exercising on the treadmill. College students have the potential to surpass exercise intensities achieved when performing a conventional standard for moderate-intensity exercise when playing Nintendo Wii Fit "Free Run" with a self-selected intensity. We concluded that Nintendo Wii Fit "Free Run" may act as an alternative to traditional moderate-intensity aerobic exercise in fulfilling the American College of Sports Medicine requirements for physical activity.

The kinematic and microphysical control of lightning rate, extent, and NOX production

NASA Astrophysics Data System (ADS)

Carey, Lawrence D.; Koshak, William; Peterson, Harold; Mecikalski, Retha M.

2016-07-01

This study investigates the kinematic and microphysical control of lightning properties, particularly those that may govern the production of nitrogen oxides (NOX = NO + NO2) via lightning (LNOX), such as flash rate, type, and extent. The NASA Lightning Nitrogen Oxides Model (LNOM) is applied to lightning observations following multicell thunderstorms through their lifecycle in a Lagrangian sense over Northern Alabama on 21 May 2012 during the Deep Convective Clouds and Chemistry (DC3) experiment. LNOM provides estimates of flash rate, type, channel length distributions, channel segment altitude distributions (SADs), and LNOX production profiles. The LNOM-derived lightning characteristics and LNOX production are compared to the evolution of radar-inferred updraft and precipitation properties. Intercloud, intracloud (IC) flash SAD comprises a significant fraction of the total (IC + cloud-to-ground [CG]) SAD, while increased CG flash SAD at altitudes >6 km occurs after the simultaneous peaks in several thunderstorm properties (i.e., total [IC + CG] and IC flash rate, graupel volume/mass, convective updraft volume, and maximum updraft speed). At heights <6 km, the CG LNOX production dominates the column-integrated total LNOX production. Unlike the SAD, total LNOX production consists of a more equal contribution from IC and CG flashes for heights >6 km. Graupel volume/mass, updraft volume, and maximum updraft speed are all well correlated to the total flash rate (correlation coefficient, ρ ≥ 0.8) but are less correlated to total flash extent (ρ ≥ 0.6) and total LNOX production (ρ ≥ 0.5). Although LNOM transforms lightning observations into LNOX production values, these values are estimates and are subject to further independent validation.

Charged Substrate and Product Together Contribute Like a Nonreactive Species to the Overall Electrostatic Steering in Diffusion-Reaction Processes.

PubMed

Xu, Jingjie; Xie, Yan; Lu, Benzhuo; Zhang, Linbo

2016-08-25

The Debye-Hückel limiting law is used to study the binding kinetics of substrate-enzyme system as well as to estimate the reaction rate of a electrostatically steered diffusion-controlled reaction process. It is based on a linearized Poisson-Boltzmann model and known for its accurate predictions in dilute solutions. However, the substrate and product particles are in nonequilibrium states and are possibly charged, and their contributions to the total electrostatic field cannot be explicitly studied in the Poisson-Boltzmann model. Hence the influences of substrate and product on reaction rate coefficient were not known. In this work, we consider all the charged species, including the charged substrate, product, and mobile salt ions in a Poisson-Nernst-Planck model, and then compare the results with previous work. The results indicate that both the charged substrate and product can significantly influence the reaction rate coefficient with different behaviors under different setups of computational conditions. It is interesting to find that when substrate and product are both considered, under an overall neutral boundary condition for all the bulk charged species, the computed reaction rate kinetics recovers a similar Debye-Hückel limiting law again. This phenomenon implies that the charged product counteracts the influence of charged substrate on reaction rate coefficient. Our analysis discloses the fact that the total charge concentration of substrate and product, though in a nonequilibrium state individually, obeys an equilibrium Boltzmann distribution, and therefore contributes as a normal charged ion species to ionic strength. This explains why the Debye-Hückel limiting law still works in a considerable range of conditions even though the effects of charged substrate and product particles are not specifically and explicitly considered in the theory.

Planning and production of grammatical and lexical verbs in multi-word messages.

PubMed

Michel Lange, Violaine; Messerschmidt, Maria; Harder, Peter; Siebner, Hartwig Roman; Boye, Kasper

2017-01-01

Grammatical words represent the part of grammar that can be most directly contrasted with the lexicon. Aphasiological studies, linguistic theories and psycholinguistic studies suggest that their processing is operated at different stages in speech production. Models of sentence production propose that at the formulation stage, lexical words are processed at the functional level while grammatical words are processed at a later positional level. In this study we consider proposals made by linguistic theories and psycholinguistic models to derive two predictions for the processing of grammatical words compared to lexical words. First, based on the assumption that grammatical words are less crucial for communication and therefore paid less attention to, it is predicted that they show shorter articulation times and/or higher error rates than lexical words. Second, based on the assumption that grammatical words differ from lexical words in being dependent on a lexical host, it is hypothesized that the retrieval of a grammatical word has to be put on hold until its lexical host is available, and it is predicted that this is reflected in longer reaction times (RTs) for grammatical compared to lexical words. We investigated these predictions by comparing fully homonymous sentences with only a difference in verb status (grammatical vs. lexical) elicited by a specific context. We measured RTs, duration and accuracy rate. No difference in duration was observed. Longer RTs and a lower accuracy rate for grammatical words were reported, successfully reflecting grammatical word properties as defined by linguistic theories and psycholinguistic models. Importantly, this study provides insight into the span of encoding and grammatical encoding processes in speech production.

Planning and production of grammatical and lexical verbs in multi-word messages

PubMed Central

Messerschmidt, Maria; Harder, Peter; Siebner, Hartwig Roman; Boye, Kasper

2017-01-01

Grammatical words represent the part of grammar that can be most directly contrasted with the lexicon. Aphasiological studies, linguistic theories and psycholinguistic studies suggest that their processing is operated at different stages in speech production. Models of sentence production propose that at the formulation stage, lexical words are processed at the functional level while grammatical words are processed at a later positional level. In this study we consider proposals made by linguistic theories and psycholinguistic models to derive two predictions for the processing of grammatical words compared to lexical words. First, based on the assumption that grammatical words are less crucial for communication and therefore paid less attention to, it is predicted that they show shorter articulation times and/or higher error rates than lexical words. Second, based on the assumption that grammatical words differ from lexical words in being dependent on a lexical host, it is hypothesized that the retrieval of a grammatical word has to be put on hold until its lexical host is available, and it is predicted that this is reflected in longer reaction times (RTs) for grammatical compared to lexical words. We investigated these predictions by comparing fully homonymous sentences with only a difference in verb status (grammatical vs. lexical) elicited by a specific context. We measured RTs, duration and accuracy rate. No difference in duration was observed. Longer RTs and a lower accuracy rate for grammatical words were reported, successfully reflecting grammatical word properties as defined by linguistic theories and psycholinguistic models. Importantly, this study provides insight into the span of encoding and grammatical encoding processes in speech production. PMID:29091940

U.S. Army Methanol-Fueled Administrative Vehicle Demonstration Program

DTIC Science & Technology

1989-08-01

for either fuel when compared with published production specifications. iii Also, four Chevrolet vehicles, two each with L-4 engines and two with V-6...With Manufacturer’s Production Specifications ... 217 G CRC Deposit Ratings for Inspected Vehicles ...................... 235 Viii LIST OF ILLUSTRATIONS...vehicles within the Government’s administrative fleet and to stimulate further the production and use of methanol-fueled vehicles. This program was

Specific light uptake rates can enhance astaxanthin productivity in Haematococcus lacustris.

PubMed

Lee, Ho-Sang; Kim, Z-Hun; Park, Hanwool; Lee, Choul-Gyun

2016-05-01

Lumostatic operation was applied for efficient astaxanthin production in autotrophic Haematococcus lacustris cultures using 0.4-L bubble column photobioreactors. The lumostatic operation in this study was performed with three different specific light uptake rates (q(e)) based on cell concentration, cell projection area, and fresh weight as one-, two- and three-dimensional characteristics values, respectively. The q(e) value from the cell concentration (q(e1D)) obtained was 13.5 × 10⁻⁸ μE cell⁻¹ s⁻¹, and the maximum astaxanthin concentration was increased to 150 % compared to that of a control with constant light intensity. The other optimum q e values by cell projection area (q(e2D)) and fresh weight (q( e3D)) were determined to be 195 μE m⁻² s⁻¹ and 10.5 μE g⁻¹ s⁻¹ for astaxanthin production, respectively. The maximum astaxanthin production from the lumostatic cultures using the parameters controlled by cell projection area (2D) and fresh weight (3D) also increased by 36 and 22% over that of the controls, respectively. When comparing the optimal q e values among the three different types, the lumostatic cultures using q(e) based on fresh weight showed the highest astaxanthin productivity (22.8 mg L⁻¹ day⁻¹), which was a higher level than previously reported. The lumostatic operations reported here demonstrated that more efficient and effective astaxanthin production was obtained by H. lacustris than providing a constant light intensity, regardless of which parameter is used to calculate the specific light uptake rate.

Paid expenditures and productivity costs associated with permanent disability pensions in patients with spinal disorders: Nationwide Finnish Register-based Study, 1990-2010.

PubMed

Asklöf, Tom; Martikainen, Janne; Kautiainen, Hannu; Haanpää, Maija; Kiviranta, Ilkka; Pohjolainen, Timo

2016-01-01

The objective of this study is to present the paid expenditures and productivity costs of disability pensions (DP) due to spinal disorders (SD) in Finland during 1990-2010. This study is a register-based national study. All new cases aged 20-64 that were granted a DP due to SD were identified from the nationwide register maintained by the Finnish Centre of Pensions. The data included sex, age group, year of the DP decision, main cause of incapacity (diagnosis) leading to permanent DP and yearly paid expenditures for DPs. Annual productivity costs were estimated based on labour force participation rate and the employment rate adjusted gross domestic product. A total of 39,107 individuals (18,072 females, 21,035 males) received DPs during the study period. SDs generated 9,372 million euros extra cost during this period due to DP (females 3.5 billion, males 5.9 billion). The total DP expenditures paid increased during the first half of 1990s but decreased during the second half of 1990s (-44.8 %). For degenerative SD cases, the DP expenditure was 5.1 billion €, disc disease 3.5 billion € and for other SDs 0.7 billion €. Males, compared to females, were expected to have a rate 1.22 times greater costs due to DPs. The estimated total annual productivity costs due to SDs have been over six times higher than expenditures paid for DPs per year. The costs of DPs are different compared to occurrence rates due to salary and early retirement age differences between genders. Despite a significant decrease in DP-associated expenditures due to SDs after 1993, the annual expenditures have stayed on a high level in Finland.

[Contents of general flavonoides in Epimedium acuminatum Franch. and its differently-processed products].

PubMed

Chen, H L; Wang, J K; Zhang, L L; Wu, Z Y

2000-04-01

Determining and comparing the contents of general flavonoides in four kinds of differently-processed products of Epimedium acuminatum. Determining the contents by ultraviolet spectrophotometry. The contents were found in the following seguence: unprocessed product, clearly-fried product, alcohol-broiled product, salt-broiled product, sheep-fat-broiled product. The average recovery rate was 96.01%, with a 0.74% RSD(n = 5). Heating causes the contents of general flavonoides in the processed products to decrease. These processed products are still often used in clinical treatment, for the reason that the adjuvant features certain coordinating and promoting functions. The study is to be pursued further.

Fluoride-sensitivity of growth and acid production of oral Actinomyces: comparison with oral Streptococcus.

PubMed

Kawashima, Junko; Nakajo, Kazuko; Washio, Jumpei; Mayanagi, Gen; Shimauchi, Hidetoshi; Takahashi, Nobuhiro

2013-12-01

Actinomyces are predominant oral bacteria; however, their cariogenic potential in terms of acid production and fluoride sensitivity has not been elucidated in detail and compared with that of other caries-associated oral bacteria, such as Streptococcus. Therefore, this study aimed to elucidate and compare the acid production and growth of Actinomyces and Streptococcus in the presence of bicarbonate and fluoride to mimic conditions in the oral cavity. Acid production from glucose was measured by pH-stat at pH 5.5 and 7.0 under anaerobic conditions. Growth rate was assessed by optical density in anaerobic culture. Although Actinomyces produced acid at a lower rate than did Streptococcus, their acid production was more tolerant of fluoride (IDacid production 50 = 110-170 ppm at pH 7.0 and 10-13 ppm at pH 5.5) than that of Streptococcus (IDacid production 50 = 36-53 ppm at pH 7.0 and 6.3-6.5 ppm at pH 5.5). Bicarbonate increased acid production by Actinomyces with prominent succinate production and enhanced their fluoride tolerance (IDacid production 50 = 220-320 ppm at pH 7.0 and 33-52 ppm at pH 5.5). Bicarbonate had no effect on these variables in Streptococcus. In addition, although the growth rate of Actinomyces was lower than that of Streptococcus, Actinomyces growth was more tolerant of fluoride (IDgrowth 50 = 130-160 ppm) than was that of Streptococcus (IDgrowth 50 = 27-36 ppm). These results indicate that oral Actinomyces are more tolerant of fluoride than oral Streptococcus, and bicarbonate enhances the fluoride tolerance of oral Actinomyces. Because of the limited number of species tested here, further study is needed to generalize these findings to the genus level. © 2013 The Societies and Wiley Publishing Asia Pty Ltd.

Hydraulic conductance as well as nitrogen accumulation plays a role in the higher rate of leaf photosynthesis of the most productive variety of rice in Japan

PubMed Central

Taylaran, Renante D.; Adachi, Shunsuke; Ookawa, Taiichiro; Usuda, Hideaki; Hirasawa, Tadashi

2011-01-01

An indica variety Takanari is known as one of the most productive rice varieties in Japan and consistently produces 20–30% heavier dry matter during ripening than Japanese commercial varieties in the field. The higher rate of photosynthesis of individual leaves during ripening has been recognized in Takanari. By using pot-grown plants under conditions of minimal mutual shading, it was confirmed that the higher rate of leaf photosynthesis is responsible for the higher dry matter production after heading in Takanari as compared with a japonica variety, Koshihikari. The rate of leaf photosynthesis and shoot dry weight became larger in Takanari after the panicle formation and heading stages, respectively, than in Koshihikari. Roots grew rapidly in the panicle formation stage until heading in Takanari compared with Koshihikari. The higher rate of leaf photosynthesis in Takanari resulted not only from the higher content of leaf nitrogen, which was caused by its elevated capacity for nitrogen accumulation, but also from higher stomatal conductance. When measured under light-saturated conditions, stomatal conductance was already decreased due to the reduction in leaf water potential in Koshihikari even under conditions of a relatively small difference in leaf–air vapour pressure difference. In contrast, the higher stomatal conductance was supported by the maintenance of higher leaf water potential through the higher hydraulic conductance in Takanari with the larger area of root surface. However, no increase in root hydraulic conductivity was expected in Takanari. The larger root surface area of Takanari might be a target trait in future rice breeding for increasing dry matter production. PMID:21527630

Hydraulic conductance as well as nitrogen accumulation plays a role in the higher rate of leaf photosynthesis of the most productive variety of rice in Japan.

PubMed

Taylaran, Renante D; Adachi, Shunsuke; Ookawa, Taiichiro; Usuda, Hideaki; Hirasawa, Tadashi

2011-07-01

An indica variety Takanari is known as one of the most productive rice varieties in Japan and consistently produces 20-30% heavier dry matter during ripening than Japanese commercial varieties in the field. The higher rate of photosynthesis of individual leaves during ripening has been recognized in Takanari. By using pot-grown plants under conditions of minimal mutual shading, it was confirmed that the higher rate of leaf photosynthesis is responsible for the higher dry matter production after heading in Takanari as compared with a japonica variety, Koshihikari. The rate of leaf photosynthesis and shoot dry weight became larger in Takanari after the panicle formation and heading stages, respectively, than in Koshihikari. Roots grew rapidly in the panicle formation stage until heading in Takanari compared with Koshihikari. The higher rate of leaf photosynthesis in Takanari resulted not only from the higher content of leaf nitrogen, which was caused by its elevated capacity for nitrogen accumulation, but also from higher stomatal conductance. When measured under light-saturated conditions, stomatal conductance was already decreased due to the reduction in leaf water potential in Koshihikari even under conditions of a relatively small difference in leaf-air vapour pressure difference. In contrast, the higher stomatal conductance was supported by the maintenance of higher leaf water potential through the higher hydraulic conductance in Takanari with the larger area of root surface. However, no increase in root hydraulic conductivity was expected in Takanari. The larger root surface area of Takanari might be a target trait in future rice breeding for increasing dry matter production.

Corn nitrogen fertilization rate tools compared over eight midwest states

USDA-ARS?s Scientific Manuscript database

Publicly-available nitrogen (N) rate recommendation tools are utilized to help maximize yield in corn production. These tools often fail both when N is over-applied and result in excess N being lost to the environment, or when N is under-applied and the result in decreased yield and economic returns...

Participation Patterns in Higher Education: A Comparative Welfare and Production Regime Perspective

ERIC Educational Resources Information Center

Andres, Lesley; Pechar, Hans

2013-01-01

This article considers the counter-intuitive observation that some of the wealthiest nations can feature low tertiary graduation rates (e.g. Austria, Germany, and Switzerland). It also considers the observation that many countries with high tertiary graduation rates show low levels of social equity, while many countries with low tertiary…

Computer assisted yarding cost analysis.

Treesearch

Ronald W. Mifflin

1980-01-01

Programs for a programable calculator and a desk-top computer are provided for quickly determining yarding cost and comparing the economics of alternative yarding systems. The programs emphasize the importance of the relationship between production rate and machine rate, which is the hourly cost of owning and operating yarding equipment. In addition to generating the...

Nitrogen source and rate effects on furrow irrigated corn yields and NUE

USDA-ARS?s Scientific Manuscript database

Nitrogen (N) rate studies were conducted under furrow irrigated corn (Zea mays L.) production on a silty clay soil to compare polymer-coated urea (PCU) and stabilized urea (SU; contains urease and nitrification inhibitors) effects on corn yields, plant N uptake and N use efficiency (NUE) to granular...

A Quantitative Study: Enhancing the Productivity of the Emotionally Challenged High School Students

ERIC Educational Resources Information Center

Mammen, John

2013-01-01

This quantitative, causal-comparative study examined the degree of influence the parent teacher relationship can make on the grade point averages and graduation rates of students in an alternative school setting. Findings of this study revealed that the active parent teacher communication had direct relationship with the success rate of…

Improved embryo development in Japanese black cattle by in vitro fertilization using ovum pick-up plus intracytoplasmic sperm injection with dithiothreitol.

PubMed

Oikawa, Toshinori; Itahashi, Tomoko; Numabe, Takashi

2016-01-01

The purpose of this study was to determine whether dithiothreitol (DTT) treatment of sperm and ethanol activation improve embryo production by intracytoplasmic sperm injection (ICSI). Further, we compared ICSI with standard in vitro fertilization (IVF) in oocytes obtained from cattle. We demonstrated that DTT reduced the disulfide bond in the bovine sperm head. Using oocytes obtained from a slaughterhouse, ICSI-DTT treatment without ethanol showed the highest rate of blastocyst formation. We applied these results to fertilization using ovum pick-up (OPU). Eleven Japanese black cattle served as donors for OPU plus standard IVF (OPU-IVF). Of them, four donors with low embryo development rates were selected to determine whether embryo development was enhanced by OPU plus ICSI (OPU-ICSI). We assessed effects on embryo development following IVF and ICSI in oocytes obtained using OPU. Blastocyst rates were significantly higher for OPU-ICSI than for OPU-IVF. Our results suggest that OPU-ICSI improves the blastocyst development rate in donors with low embryo production compared with the standard OPU-IVF.

Improved embryo development in Japanese black cattle by in vitro fertilization using ovum pick-up plus intracytoplasmic sperm injection with dithiothreitol

PubMed Central

OIKAWA, Toshinori; ITAHASHI, Tomoko; NUMABE, Takashi

2015-01-01

The purpose of this study was to determine whether dithiothreitol (DTT) treatment of sperm and ethanol activation improve embryo production by intracytoplasmic sperm injection (ICSI). Further, we compared ICSI with standard in vitro fertilization (IVF) in oocytes obtained from cattle. We demonstrated that DTT reduced the disulfide bond in the bovine sperm head. Using oocytes obtained from a slaughterhouse, ICSI-DTT treatment without ethanol showed the highest rate of blastocyst formation. We applied these results to fertilization using ovum pick-up (OPU). Eleven Japanese black cattle served as donors for OPU plus standard IVF (OPU-IVF). Of them, four donors with low embryo development rates were selected to determine whether embryo development was enhanced by OPU plus ICSI (OPU-ICSI). We assessed effects on embryo development following IVF and ICSI in oocytes obtained using OPU. Blastocyst rates were significantly higher for OPU-ICSI than for OPU-IVF. Our results suggest that OPU-ICSI improves the blastocyst development rate in donors with low embryo production compared with the standard OPU-IVF. PMID:26460690

Co-fermentation of carbon sources by Enterobacter aerogenes ATCC 29007 to enhance the production of bioethanol.

PubMed

Thapa, Laxmi Prasad; Lee, Sang Jun; Yang, Xiao Guang; Yoo, Hah Young; Kim, Sung Bong; Park, Chulhwan; Kim, Seung Wook

2014-06-01

We investigated the enhancement of bioethanol production in Enterobacter aerogenes ATCC 29007 by co-fermentation of carbon sources such as glycerol, glucose, galactose, sucrose, fructose, xylose, starch, mannitol and citric acid. Biofuel production increases with increasing growth rate of microorganisms; that is why we investigated the optimal growth rate of E. aerogenes ATCC 29007, using mixtures of different carbon sources with glycerol. E. aerogenes ATCC 29007 was incubated in media containing each carbon source and glycerol; growth rate and bioethanol production improved in all cases compared to those in medium containing glycerol alone. The growth rate and bioethanol production were highest with mannitol. Fermentation was carried out at 37 °C for 18 h, pH 7, using 50 mL defined production medium in 100 mL serum bottles at 200 rpm. Bioethanol production under optimized conditions in medium containing 16 g/L mannitol and 20 g/L glycerol increased sixfold (32.10 g/L) than that containing glycerol alone (5.23 g/L) as the carbon source in anaerobic conditions. Similarly, bioethanol production using free cells in continuous co-fermentation also improved (27.28 g/L) when 90.37 % of 16 g/L mannitol and 67.15 % of 20 g/L glycerol were used. Although naturally existing or engineered microorganisms can ferment mixed sugars sequentially, the preferential utilization of glucose to non-glucose sugars often results in lower overall yield and productivity of ethanol. Here, we present new findings in E. aerogenes ATCC 29007 that can be used to improve bioethanol production by simultaneous co-fermentation of glycerol and mannitol.

Atmospheric Pb and Ti accumulation rates from Sphagnum moss: dependence upon plant productivity.

PubMed

Kempter, H; Krachler, M; Shotyk, W

2010-07-15

The accumulation rates of atmospheric Pb and Ti were obtained using the production rates of Sphagnum mosses collected in four ombrotrophic bogs from two regions of southern Germany: Upper Bavaria (Oberbayern, OB) and the Northern Black Forest (Nordschwarzwald, NBF). Surfaces of Sphagnum carpets were marked with plastic mesh and one year later the production of plant matter was harvested. Metal concentrations were determined in acid digests using sector field ICP-MS employing well established analytical procedures. Up to 12 samples (40 x 40 cm) were collected per site, and 6-10 sites were investigated per bog. Variations within a given sampling site were in the range 2.3-4x for Pb concentrations, 1.8-2.5x for Ti concentrations, 3-8.3x for Pb/Ti, 5.6-7.8x for Pb accumulation rates, and 2.3-6.4x for Ti accumulation rates. However, the median values of these parameters for the sites (6-10 per bog) were quite consistent. The mosses from the bogs in NBF exhibited significantly greater productivity (187-202 g m(-2) a(-1)) compared to the OB peat bogs (71-91 g m(-2) a(-1)), and these differences had a pronounced effect on the Pb and Ti accumulation rates. Highly productive mosses showed no indication of a "dilution effect" of Pb or Ti concentrations, suggesting that more productive plants were simply able to accumulate more particles from the air. The median rates of net Pb accumulation by the mosses are in excellent agreement with the fluxes obtained by direct atmospheric measurements at nearby monitoring stations in both regions (EMEP and MAPESI data).

Enhanced production of poly(3-hydroxybutyrate) in a novel airlift reactor with in situ cell retention using Azohydromonas australica.

PubMed

Gahlawat, Geeta; Sengupta, Bedoshree; Srivastava, Ashok K

2012-09-01

Economic production of biodegradable plastics is a challenge particularly because of high substrate and energy cost inputs for its production. Research efforts are being directed towards innovations to minimize both of the above costs to economize polyhydroxybutyrate (PHB) production. A novel airlift reactor (ALR) with outer aeration and internal settling was utilized in this investigation. Although it featured no power consumption for agitation, it facilitated increased oxygen transfer rate and better cell retention than stirred tank reactor (STR), thereby resulting in enhanced PHB productivity. ALR with in situ cell retention demonstrated a significant improvement in biomass concentration and biopolymer accumulation. The total PHB production rate, specific biomass, and product yield in the ALR were observed to be 0.84 g/h, 0.43 g/g, and 0.32 g/g, respectively. The studies revealed that the volumetric oxygen mass transfer rate and mixing time for ALR were 0.016 s⁻¹ and 3.73 s, respectively, at 2.0 vvm as compared with corresponding values of 0.005 s⁻¹ and 4.95 s, respectively, in STR. This demonstrated that ALR has better oxygen mass transfer and mixing efficiency than STR. Hence, ALR with cell retention would serve as a better bioreactor design for economic biopolymer production than STR, particularly due to its lower cost of operation and simplicity along with its enhanced oxygen and heat transfer rates.

Deriving fractional rate of degradation of logistic-exponential (LE) model to evaluate early in vitro fermentation.

PubMed

Wang, M; Sun, X Z; Tang, S X; Tan, Z L; Pacheco, D

2013-06-01

Water-soluble components of feedstuffs are mainly utilized during the early phase of microbial fermentation, which could be deemed an important determinant of gas production behavior in vitro. Many studies proposed that the fractional rate of degradation (FRD) estimated by fitting gas production curves to mathematical models might be used to characterize the early incubation for in vitro systems. In this study, the mathematical concept of FRD was developed on the basis of the Logistic-Exponential (LE) model, with initial gas volume being zero (LE0). The FRD of the LE0 model exhibits a continuous increase from initial (FRD 0) toward final asymptotic value (FRD F) with longer incubation time. The relationships between the FRD and gas production at incubation times 2, 4, 6, 8, 12 and 24 h were compared for four models, in addition to LE0, Generalization of the Mitscherlich (GM), c th order Michaelis-Menten (MM) and Exponential with a discrete LAG (EXPLAG). A total of 94 in vitro gas curves from four subsets with a wide range of feedstuffs from different laboratories and incubation periods were used for model testing. Results indicated that compared with the GM, MM and EXPLAG models, the FRD of LE0 model consistently had stronger correlations with gas production across the four subsets, especially at incubation times 2, 4, 6, 8 and 12 h. Thus, the LE0 model was deemed to provide a better representation of the early fermentation rates. Furthermore, the FRD 0 also exhibited strong correlations (P < 0.05) with gas production at early incubation times 2, 4, 6 and 8 h across all four subsets. In summary, the FRD of LE0 model provides an alternative to quantify the rate of early stage incubation, and its initial value could be an important starting parameter of rate.

Production of scandium-44 m and scandium-44 g with deuterons on calcium-44: cross section measurements and production yield calculations.

PubMed

Duchemin, C; Guertin, A; Haddad, F; Michel, N; Métivier, V

2015-09-07

HIGHLIGHTS • Production of Sc-44 m, Sc-44 g and contaminants. • Experimental values determined using the stacked-foil technique. • Thick-Target production Yield (TTY) calculations. • Comparison with the TALYS code version 1.6.Among the large number of radionuclides of medical interest, Sc-44 is promising for PET imaging. Either the ground-state Sc-44 g or the metastable-state Sc-44 m can be used for such applications, depending on the molecule used as vector. This study compares the production rates of both Sc-44 states, when protons or deuterons are used as projectiles on an enriched Calcium-44 target. This work presents the first set of data for the deuteron route. The results are compared with the TALYS code. The Thick-Target production Yields of Sc-44 m and Sc-44 g are calculated and compared with those for the proton route for three different scenarios: the production of Sc-44 g for conventional PET imaging, its production for the new 3 γ imaging technique developed at the SUBATECH laboratory and the production of a Sc-44 m/Sc-44 g in vivo generator for antibody labelling.

The production and escape of nitrogen atoms on Mars

NASA Technical Reports Server (NTRS)

Fox, J. L.

1993-01-01

Updated rate coefficients and a revised ionosphere-thermosphere model are used to compute the production rates and densities of odd nitrogen species in the Martian atmosphere. Computed density profiles for N(4S), N(2D), N(2P), and NO are presented. The model NO densities are found to be about a factor of 2-3 less than those measured by the Viking 1 mass spectrometer. Revised values for the escape rates of N atoms from dissociative recombination and ionospheric reactions are also computed. Dissociative recombination is found to be comparable in importance to photodissociation at low solar activity, but it is still the most important escape mechanism for N-14 at high solar activity.

Comparison of water production rates from UV spectroscopy and visual magnitudes for some recent comets

NASA Technical Reports Server (NTRS)

Roettger, E. E.; Feldman, P. D.; A'Hearn, M. F.; Festou, M. C.

1990-01-01

IUE data on the UV and visible coma emissions of the comets Bradfield, P/Tempel 2, Wilson, and P/Halley, are presently compared with the visual lightcurves from magnitudes reported in the IAU circulars to consider the temporal evolution of these comets. While the water-production rates obtainable from visual magnitudes on the basis of Newburn's (1984) method are consistent with OH-derived rates to first order, they are sometimes either displaced or unable to exhibit the same pre/postperihelion asymmetry. The best agreement is obtained for the relatively dust-free Comet P/Tempel 2. IUE Fine Error Sensor lightcurves are generally in agreement with curves based on total visual magnitude.

Correlation studies on nitrogen for sunflower crop across the agroclimatic variability.

PubMed

Nasim, Wajid; Belhouchette, Hatem; Tariq, Muhammad; Fahad, Shah; Hammad, Hafiz Mohkum; Mubeen, Muhammad; Munis, Muhammad Farooq Hussain; Chaudhary, Hassan Javed; Khan, Imran; Mahmood, Faisal; Abbas, Tauqeer; Rasul, Fahd; Nadeem, Muhammad; Bajwa, Ali Ahsan; Ullah, Najeeb; Alghabari, Fahad; Saud, Shah; Mubarak, Hussani; Ahmad, Rafiq

2016-02-01

Nitrogen (N) fertilizer is an important yield limiting factor for sunflower production. The correlation between yield components and growth parameters of three sunflower hybrids (Hysun-33, Hysun-38, Pioneer-64A93) were studied with five N rates (0, 60, 120, 180, 240 kg ha(-1)) at three different experimental sites during the two consecutive growing seasons 2008 and 2009. The results revealed that total dry matter (TDM) production and grain yield were positively and linearly associated with leaf area index (LAI), leaf area duration (LAD), and crop growth rate (CGR) at all three sites of the experiments. The significant association of yield with growth components indicated that the humid climate was most suitable for sunflower production. Furthermore, the association of these components can be successfully used to predict the grain yield under diverse climatic conditions. The application of N at increased rate of 180 kg ha(-1) resulted in maximum yield as compared to standard rate (120 kg ha(-1)) at all the experimental sites. In this way, N application rate was significantly correlated with growth and development of sunflower under a variety of climatic conditions. Keeping in view such relationship, the N dose can be optimized for sunflower crop in a particular region to maximize the productivity. Multilocation trails help to predict the input rates precisely while taking climatic variations into account also. In the long run, results of this study provides basis for sustainable sunflower production under changing climate.

Boosting subsurface life: is subseafloor sediment a natural catalyst for radiolytic hydrogen production?

NASA Astrophysics Data System (ADS)

Sauvage, J.; Graham, D.; Spivack, A. J.; Dunlea, A. G.; Murray, R. W.; D'Hondt, S.

2014-12-01

Naturally occurring production of molecular hydrogen (H2) by water radiolysis may be a fundamentally important source of electron donors (energy) for life in subsurface environments where organic matter is scarce. Previous studies with very high gamma radiation rates and wet mineral phases have reported high H2 production relative to production from water radiolysis in the absence of solid phases. Numerical calculations by other previous studies have predicted enhanced H2 production from seawater radiolysis relative to pure water radiolysis, due to the interaction of anions with hydroxyl radicals. Given these reports, the potential catalytic influences of solid and dissolved chemical phases on radiolytic H2 production need to be carefully quantified in order to fully evaluate the role of radiolytic H2 as a microbial energy source. For such quantification, we undertook gamma-irradiation experiments with pure water, deep ocean water and mixtures (slurries, φ = 0.85) of seawater with: North Pacific abyssal clay and calcareous oozes, coastal sediment, zirconium dioxide, and zeolite. We carried out our experiments at the Rhode Island Nuclear Science Center using a 37Cesium source at low dose rates (up to 0.1 Gy/hr). Our results to date include the following. First, the per-dose radiolytic H2 yield of pure water at low dose rates is directly comparable to the per-dose yield at much higher dose rates (ca. 1 kGy/hr); this result indicates that H2 production rate is linearly related to radiation dose rate across four orders of magnitude. Second, there is no statistically significant difference (90% confidence limit) between the radiolytic H2 yield from pure water and that from seawater; this result rules out influence of abundant seawater salts on H2 yield from water radiolysis. Third, H2 production from a mixture of abyssal clay and seawater is 25% higher than the yield from pure water. This enhanced yield is consistent with catalysis of radiolytic H2 production by zeolite.

High temperature stimulates acetic acid accumulation and enhances the growth inhibition and ethanol production by Saccharomyces cerevisiae under fermenting conditions.

PubMed

Woo, Ji-Min; Yang, Kyung-Mi; Kim, Sae-Um; Blank, Lars M; Park, Jin-Byung

2014-07-01

Cellular responses of Saccharomyces cerevisiae to high temperatures of up to 42 °C during ethanol fermentation at a high glucose concentration (i.e., 100 g/L) were investigated. Increased temperature correlated with stimulated glucose uptake to produce not only the thermal protectant glycerol but also ethanol and acetic acid. Carbon flux into the tricarboxylic acid (TCA) cycle correlated positively with cultivation temperature. These results indicate that the increased demand for energy (in the form of ATP), most likely caused by multiple stressors, including heat, acetic acid, and ethanol, was matched by both the fermentation and respiration pathways. Notably, acetic acid production was substantially stimulated compared to that of other metabolites during growth at increased temperature. The acetic acid produced in addition to ethanol seemed to subsequently result in adverse effects, leading to increased production of reactive oxygen species. This, in turn, appeared to cause the specific growth rate, and glucose uptake rate reduced leading to a decrease of the specific ethanol production rate far before glucose depletion. These results suggest that adverse effects from heat, acetic acid, ethanol, and oxidative stressors are synergistic, resulting in a decrease of the specific growth rate and ethanol production rate and, hence, are major determinants of cell stability and ethanol fermentation performance of S. cerevisiae at high temperatures. The results are discussed in the context of possible applications.

Processing parameters associated with scale-up of balloon film production

NASA Technical Reports Server (NTRS)

Simpson, D. M.; Harrison, I. R.

1993-01-01

A method is set forth for assessing strain-rate profiles that can be used to develop a scale-up theory for blown-film extrusion. Strain rates are evaluated by placing four ink dots on the stalk of an extruded bubble to follow the displacements of the dots as a function of time. The instantaneous Hencky strain is obtained with the displacement data and plotted for analysis. Specific attention is given to potential sources of error in the distance measurements and corrections for these complex bubble geometries. The method is shown to be effective for deriving strain-rate data related to different processing parameters for the production of balloon film. The strain rates can be compared to frostline height, blow-up ratio, and take-up ratio to optimize these processing variables.

Emission Rates of Volatile Organic Compounds Released from Newly Produced Household Furniture Products Using a Large-Scale Chamber Testing Method

PubMed Central

Ho, Duy Xuan; Kim, Ki-Hyun; Ryeul Sohn, Jong; Hee Oh, Youn; Ahn, Ji-Won

2011-01-01

The emission rates of volatile organic compounds (VOCs) were measured to investigate the emission characteristics of five types of common furniture products using a 5 m3 size chamber at 25°C and 50% humidity. The results indicated that toluene and α-pinene are the most dominant components. The emission rates of individual components decreased constantly through time, approaching the equilibrium emission level. The relative ordering of their emission rates, if assessed in terms of total VOC (TVOC), can be arranged as follows: dining table > sofa > desk chair > bedside table > cabinet. If the emission rates of VOCs are examined between different chemical groups, they can also be arranged in the following order: aromatic (AR) > terpenes (TER) > carbonyl (CBN) > others > paraffin (PR) > olefin (HOL) > halogenated paraffin (HPR). In addition, if emission strengths are compared between coated and uncoated furniture, there is no significant difference in terms of emission magnitude. Our results indicate that the emission characteristics of VOC are greatly distinguished between different furniture products in terms of relative dominance between different chemicals. PMID:22125421

Comparing Positively and Negatively Charged Distonic Radical Ions in Phenylperoxyl Forming Reactions.

PubMed

Williams, Peggy E; Marshall, David L; Poad, Berwyck L J; Narreddula, Venkateswara R; Kirk, Benjamin B; Trevitt, Adam J; Blanksby, Stephen J

2018-06-04

In the gas phase, arylperoxyl forming reactions play a significant role in low-temperature combustion and atmospheric processing of volatile organic compounds. We have previously demonstrated the application of charge-tagged phenyl radicals to explore the outcomes of these reactions using ion trap mass spectrometry. Here, we present a side-by-side comparison of rates and product distributions from the reaction of positively and negatively charge tagged phenyl radicals with dioxygen. The negatively charged distonic radical ions are found to react with significantly greater efficiency than their positively charged analogues. The product distributions of the anion reactions favor products of phenylperoxyl radical decomposition (e.g., phenoxyl radicals and cyclopentadienone), while the comparable fixed-charge cations yield the stabilized phenylperoxyl radical. Electronic structure calculations rationalize these differences as arising from the influence of the charged moiety on the energetics of rate-determining transition states and reaction intermediates within the phenylperoxyl reaction manifold and predict that this influence could extend to intra-molecular charge-radical separations of up to 14.5 Å. Experimental observations of reactions of the novel 4-(1-carboxylatoadamantyl)phenyl radical anion confirm that the influence of the charge on both rate and product distribution can be modulated by increasing the rigidly imposed separation between charge and radical sites. These findings provide a generalizable framework for predicting the influence of charged groups on polarizable radicals in gas phase distonic radical ions. Graphical Abstract.

Comparing Positively and Negatively Charged Distonic Radical Ions in Phenylperoxyl Forming Reactions

NASA Astrophysics Data System (ADS)

Williams, Peggy E.; Marshall, David L.; Poad, Berwyck L. J.; Narreddula, Venkateswara R.; Kirk, Benjamin B.; Trevitt, Adam J.; Blanksby, Stephen J.

2018-06-01

In the gas phase, arylperoxyl forming reactions play a significant role in low-temperature combustion and atmospheric processing of volatile organic compounds. We have previously demonstrated the application of charge-tagged phenyl radicals to explore the outcomes of these reactions using ion trap mass spectrometry. Here, we present a side-by-side comparison of rates and product distributions from the reaction of positively and negatively charge tagged phenyl radicals with dioxygen. The negatively charged distonic radical ions are found to react with significantly greater efficiency than their positively charged analogues. The product distributions of the anion reactions favor products of phenylperoxyl radical decomposition (e.g., phenoxyl radicals and cyclopentadienone), while the comparable fixed-charge cations yield the stabilized phenylperoxyl radical. Electronic structure calculations rationalize these differences as arising from the influence of the charged moiety on the energetics of rate-determining transition states and reaction intermediates within the phenylperoxyl reaction manifold and predict that this influence could extend to intra-molecular charge-radical separations of up to 14.5 Å. Experimental observations of reactions of the novel 4-(1-carboxylatoadamantyl)phenyl radical anion confirm that the influence of the charge on both rate and product distribution can be modulated by increasing the rigidly imposed separation between charge and radical sites. These findings provide a generalizable framework for predicting the influence of charged groups on polarizable radicals in gas phase distonic radical ions.

Organic degradation under simulated Martian conditions.

PubMed

Stoker, C R; Bullock, M A

1997-05-25

We report on laboratory experiments which simulate the breakdown of organic compounds under Martian surface conditions. Chambers containing Mars-analog soil mixed with the amino acid glycine were evacuated and filled to 100 mbar pressure with a Martian atmosphere gas mixture and then irradiated with a broad spectrum Xe lamp. Headspace gases were periodically withdrawn and analyzed via gas chromatography for the presence of organic gases expected to be decomposition products of the glycine. The quantum efficiency for the decomposition of glycine by light at wavelengths from 2000 to 2400 angstroms was measured to be 1.46 +/- 1.0 x 10(-6) molecules/photon. Scaled to Mars, this represents an organic destruction rate of 2.24 +/- 1.2 x 10(-4) g of C m-2 yr-1. We compare this degradation rate with the rate that organic compounds are brought to Mars as a result of meteoritic infall to show that organic compounds are destroyed on Mars at rates far exceeding the rate that they are deposited by meteorites. Thus the fact that no organic compounds were found on Mars by the Viking Lander Gas Chromatograph Mass Spectrometer experiment can be explained without invoking the presence of strong oxidants in the surface soils. The organic destruction rate may be considered as an upper bound for the globally averaged biomass production rate of extant organisms at the surface of Mars. This upper bound is comparable to the slow growing cryptoendolithic microbial communities found in dry Antarctica deserts. Finally, comparing these organic destruction rates to recently reported experiments on the stability of carbonate on the surface of Mars, we find that organic compounds may currently be more stable than calcite.

Organic degradation under simulated Martian conditions

NASA Astrophysics Data System (ADS)

Stoker, Carol R.; Bullock, Mark A.

1997-05-01

We report on laboratory experiments which simulate the breakdown of organic compounds under Martian surface conditions. Chambers containing Mars-analog soil mixed with the amino acid glycine were evacuated and filled to 100 mbar pressure with a Martian atmosphere gas mixture and then irradiated with a broad spectrum Xe lamp. Headspace gases were periodically withdrawn and analyzed via gas chromatography for the presence of organic gases expected to be decomposition products of the glycine. The quantum efficiency for the decomposition of glycine by light at wavelengths from 2000 to 2400 Å was measured to be 1.46+/-1.0×10-6molecules/photon. Scaled to Mars, this represents an organic destruction rate of 2.24+/-1.2×10-4g of Cm-2yr-1. We compare this degradation rate with the rate that organic compounds are brought to Mars as a result of meteoritic infall to show that organic compounds are destroyed on Mars at rates far exceeding the rate that they are deposited by meteorites. Thus the fact that no organic compounds were found on Mars by the Viking Lander Gas Chromatograph Mass Spectrometer experiment can be explained without invoking the presence of strong oxidants in the surface soils. The organic destruction rate may be considered as an upper bound for the globally averaged biomass production rate of extant organisms at the surface of Mars. This upper bound is comparable to the slow growing cryptoendolithic microbial communities found in dry Antarctica deserts. Finally, comparing these organic destruction rates to recently reported experiments on the stability of carbonate on the surface of Mars, we find that organic compounds may currently be more stable than calcite.

Continuous hydrogen and methane production from Agave tequilana bagasse hydrolysate by sequential process to maximize energy recovery efficiency.

PubMed

Montiel Corona, Virginia; Razo-Flores, Elías

2018-02-01

Continuous H 2 and CH 4 production in a two-stage process to increase energy recovery from agave bagasse enzymatic-hydrolysate was studied. In the first stage, the effect of organic loading rate (OLR) and stirring speed on volumetric hydrogen production rate (VHPR) was evaluated in a continuous stirred tank reactor (CSTR); by controlling the homoacetogenesis with the agitation speed and maintaining an OLR of 44 g COD/L-d, it was possible to reach a VHPR of 6 L H 2 /L-d, equivalent to 1.34 kJ/g bagasse. In the second stage, the effluent from CSTR was used as substrate to feed a UASB reactor for CH 4 production. Volumetric methane production rate (VMPR) of 6.4 L CH 4 /L-d was achieved with a high OLR (20 g COD/L-d) and short hydraulic retention time (HRT, 14 h), producing 225 mL CH 4 /g-bagasse equivalent to 7.88 kJ/g bagasse. The two-stage continuous process significantly increased energy conversion efficiency (56%) compared to one-stage hydrogen production (8.2%). Copyright © 2017 Elsevier Ltd. All rights reserved.

Institutional Productivity Ratings Based on Publications in Nine Literacy Journals: 1992-2005

ERIC Educational Resources Information Center

Morrison, Timothy G.; Wilcox, Brad

2008-01-01

This study extended the work of three previous studies that compared the scholarly productivity of faculty members in universities as represented in nine literacy journals. The top 25 universities were identified and this study shows that several institutions have remained consistent through the years as those that produce the largest amount of…

Radiocarbon Production by Thunderstorms

NASA Astrophysics Data System (ADS)

Babich, L. P.

2017-11-01

In view of the neutron flux enhancements observed in thunderstorms, a contribution of thunderstorm neutrons to atmospheric radiocarbon (isotope 614C) production is analyzed in connection with the archaeometry. Herein, estimates of neutron fluence per lightning electromagnetic pulse in regions with severe thunderstorm activity, at which a local rate of the 614C production is comparable to the observed rates, are shown to be consistent with the measured magnitudes of thunderstorm neutron fluence. At present, available observations of atmospheric neutron and parent gamma ray flashes correlated with thunderstorms do not allow making final conclusions about thunderstorm contributions to 614C production. For this, numerous studies of high-energy phenomena in thunderstorms are required, especially in the tropical belt where the thunderstorm activity is especially severe and where the 614C production by galactic cosmic rays is almost independent of the solar activity disturbing the Earth's magnetic field shielding the Earth from cosmic rays.

Yield-stress fluids foams: flow patterns and controlled production in T-junction and flow-focusing devices.

PubMed

Laborie, Benoit; Rouyer, Florence; Angelescu, Dan E; Lorenceau, Elise

2016-11-23

We study the formation of yield-stress fluid foams in millifluidic flow-focusing and T-junction devices. First, we provide a phase diagram for the unsteady operating regimes of bubble production when the gas pressure and the yield-stress fluid flow rate are imposed. Three regimes are identified: a co-flow of gas and yield-stress fluid, a transient production of bubble and a flow of yield-stress fluid only. Taking wall slip into account, we provide a model for the pressure at the onset of bubble formation. Then, we detail and compare two simple methods to ensure steady bubble production: regulation of the gas pressure or flow-rate. These techniques, which are easy to implement, thus open pathways for controlled production of dry yield-stress fluid foams as shown at the end of this article.

Production of a nitrogeneous humic fertilizer by the oxidation-ammoniation of lignite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coca, J.

1984-12-01

Two lignite samples were oxidised with HNO/sub 3/ (20% wt) at 75 C and treated afterwards with NH/sub 3/ in a fluidised-bed reactor in a temperature range 100-375 C. The effects of temperature, NH/sub 3/ flow rate, and reaction time on the total N/sub 2/ content of the product are reported. The product contained 7-13% wt of total N/sub 2/ which increased as the ammoniation temperature increased. Soil nitrification measurements of the N/sub 2/-enriched lignites showed that the maximum conversion to nitrates and rate of nitrification are exhibited by the product obtained at the lowest ammoniation temperature, i.e. 100 C.more » Maximum conversion to nitrates at that temperature was 45%, which compares well with similar products such as ammoniated peat (35%) and ammonium nitrohumates (45%).« less

Pyrolysis of tyre powder using microwave thermogravimetric analysis: Effect of microwave power.

PubMed

Song, Zhanlong; Yang, Yaqing; Zhou, Long; Zhao, Xiqiang; Wang, Wenlong; Mao, Yanpeng; Ma, Chunyuan

2017-02-01

The pyrolytic characteristics of tyre powder treated under different microwave powers (300, 500, and 700 W) were studied via microwave thermogravimetric analysis. The product yields at different power levels were studied, along with comparative analysis of microwave pyrolysis and conventional pyrolysis. The feedstock underwent preheating, intense pyrolysis, and final pyrolysis in sequence. The main and secondary weight loss peaks observed during the intense pyrolysis stage were attributed to the decomposition of natural rubbers and synthetic rubbers, respectively. The total mass loss rates, bulk temperatures, and maximum temperatures were distinctively higher at higher powers. However, the maximum mass loss rate (0.005 s -1 ), the highest yields of liquid product (53%), and the minimum yields of residual solid samples (43.83%) were obtained at 500 W. Compared with conventional pyrolysis, microwave pyrolysis exhibited significantly different behaviour with faster reaction rates, which can decrease the decomposition temperatures of both natural and synthetic rubber by approximately 110 °C-140 °C.

Effect of heating rate on thermal cracking characteristics and kinetics of Xinjiang oil sand bitumen by TG-FTIR

NASA Astrophysics Data System (ADS)

Hao, Junhui; Zhang, Jinhong; Qiao, Yingyun; Tian, Yuanyu

2017-08-01

This work was aimed to investigate effects of heating rate on thermal cracking behaviors, distribution of gaseous products and activation energy of the thermal cracking process of Xinjiang oil sand bitumen (OSB). The thermal cracking experiments of Xinjiang OSB were performed by using thermogravimetric analyzer (TGA) at various heating rates of 10, 20, 50, 80 and 120 K/min. The evolving characteristic of gaseous products produced from the thermal cracking process was evaluated by the Fourier transform infrared spectrometry (FTIR) connected with TG. The kinetic parameters of the thermal cracking process of Xinjiang OSB at each of heating rate were determined by the Coats-Redfern model. The result show that the temperature intervals of DE volatilization stage and main reaction stage, the ((dw/dt) max and Tmax in thermal cracking process of Xinjiang OSB all increased with the increasing heating rate. While the heating rate has not obvious effect on the coke yield of Xinjiang OSB. Furthermore, the maximum absorbance of gaseous products and corresponding temperature became larger as the heating rate increases. The activation energy of this two stage both presented increasing trend with the rising heating rate, while the increasing content of that of DE volatilization stage was weaker compared to that of main reaction stage.

Enhancement of Loperamide Dissolution Rate by Liquisolid Compact Technique.

PubMed

Venkateswarlu, Kambham; Preethi, Jami Komala; Chandrasekhar, Kothapalli Bonnoth

2016-09-01

Purpose: The aim of present study was to improve the dissolution rate of poorly soluble drug Loperamide (LPM) by liquisolid compact technique. Methods: Liquisolid compacts of LPM were prepared using Propylene glycol (PG) as a solvent, Avicel pH 102 as carrier, Aerosil as coating material and Sodium Starch Glycolate (SSG) as superdisintegrant. Interactions between the drug and excipients were examined by Fourier Transform Infrared (FTIR) spectroscopy. The dissolution studies for LPM liquisolid formulation, marketed product and pure drug were carried out in pH 1.2 HCl buffer as dissolution media. Results: Results confirmed the absence of chemical interactions between the drug and excipients. From the solubility studies, it was observed the LPM was highly soluble in PG thereby it was selected as a solvent. The dissolution efficiency of LPM at 15 min was increased from 9.99 % for pure drug and 54.57% for marketed product to 86.81% for the tablets prepared by liquisolid compact technique. Stability studies showed no significant change in percent cumulative drug release, hardness, disintegration time, friability and drug content for 3 months. Conclusion: Formulation F2 showed significant increase in dissolution rate compared to the marketed product at pH 1.2 where LPM is largely absorbed. Around 90% of the drug was released from F2 in 30 min compared to the marketed product and it might be due to the increased wetting and surface area of the particles. Hence, the liquisolid compact technique appears to be a promising approach for improving the dissolution rate of poorly soluble drug.

Directed evolution of xylose isomerase for improved xylose catabolism and fermentation in the yeast Saccharomyces cerevisiae.

PubMed

Lee, Sun-Mi; Jellison, Taylor; Alper, Hal S

2012-08-01

The heterologous expression of a highly functional xylose isomerase pathway in Saccharomyces cerevisiae would have significant advantages for ethanol yield, since the pathway bypasses cofactor requirements found in the traditionally used oxidoreductase pathways. However, nearly all reported xylose isomerase-based pathways in S. cerevisiae suffer from poor ethanol productivity, low xylose consumption rates, and poor cell growth compared with an oxidoreductase pathway and, additionally, often require adaptive strain evolution. Here, we report on the directed evolution of the Piromyces sp. xylose isomerase (encoded by xylA) for use in yeast. After three rounds of mutagenesis and growth-based screening, we isolated a variant containing six mutations (E15D, E114G, E129D, T142S, A177T, and V433I) that exhibited a 77% increase in enzymatic activity. When expressed in a minimally engineered yeast host containing a gre3 knockout and tal1 and XKS1 overexpression, the strain expressing this mutant enzyme improved its aerobic growth rate by 61-fold and both ethanol production and xylose consumption rates by nearly 8-fold. Moreover, the mutant enzyme enabled ethanol production by these yeasts under oxygen-limited fermentation conditions, unlike the wild-type enzyme. Under microaerobic conditions, the ethanol production rates of the strain expressing the mutant xylose isomerase were considerably higher than previously reported values for yeast harboring a xylose isomerase pathway and were also comparable to those of the strains harboring an oxidoreductase pathway. Consequently, this study shows the potential to evolve a xylose isomerase pathway for more efficient xylose utilization.

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

PubMed

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Human-induced seismicity and large-scale hydrocarbon production in the USA and Canada

NASA Astrophysics Data System (ADS)

van der Baan, Mirko; Calixto, Frank J.

2017-07-01

We compare current and historic seismicity rates in six States in the USA and three Provinces in Canada to past and present hydrocarbon production. All States/Provinces are major hydrocarbon producers. Our analyses span three to five decades depending on data availability. Total hydrocarbon production has significantly increased in the past few years in these regions. Increased production in most areas is due to large-scale hydraulic fracturing and thus underground fluid injection. Furthermore, increased hydrocarbon production generally leads to increased water production, which must be treated, recycled, or disposed of underground. Increased fluid injection enhances the likelihood of fault reactivation, which may affect current seismicity rates. We find that increased seismicity in Oklahoma, likely due to salt-water disposal, has an 85% correlation with oil production. Yet, the other areas do not display State/Province-wide correlations between increased seismicity and production, despite 8-16-fold increases in production in some States. However, in various cases, seismicity has locally increased. Multiple factors play an important role in determining the likelihood of anthropogenic activities influencing earthquake rates, including (i) the near-surface tectonic background rate, (ii) the existence of critically stressed and favorably oriented faults, which must be hydraulically connected to injection wells, (iii) the orientation and magnitudes of the in situ stress field, combined with (iv) the injection volumes and implemented depletion strategies. A comparison with the seismic hazard maps for the USA and Canada shows that induced seismicity is less likely in areas with a lower hazard. The opposite, however, is not necessarily true.

Nutrient controls on new production in the Bodega Bay, California, coastal upwelling plume

NASA Astrophysics Data System (ADS)

Dugdale, R. C.; Wilkerson, F. P.; Hogue, V. E.; Marchi, A.

2006-12-01

A theoretical framework for the time-dependent processes leading to the high rates of new production in eastern boundary upwelling systems has been assembled from a series of past upwelling studies. As part of the CoOP WEST (Wind Events and Shelf Transport) study, new production in the Bodega Bay upwelling area and it's control by ambient nitrate and ammonium concentrations and the advective wind regime are described. Data and analyses are focused primarily on the WEST 2001 cruise (May-June 2001) when the two legs differed greatly in wind regimes but not nutrient concentrations. Elevated concentrations of ammonium in upwelled water with high nitrate were observed in both legs. Nitrate uptake by phytoplankton as a function of nitrate concentration was linear rather than Michaelis-Menten-like, modulated by inhibitory levels of ammonium, yielding coefficients that enable the specific nitrate uptake element of new production to be estimated from nutrient concentrations. The range of specific nitrate uptake rates for the two legs of WEST 2001 were similar, essentially a physiological response to nutrient conditions. However, the low "realization" of new production i.e. incorporation of biomass as particulate nitrogen that occurred in this system compared to the theoretical maximum possible was determined by the strong advective and turbulent conditions that dominated the second leg of the WEST 2001 study. These data are compared with other upwelling areas using a physiological shift-up model [Dugdale, R.C., Wilkerson, F.P., Morel, A. 1990. Realization of new production in coastal upwelling areas: a means to compare relative performance. Limnology and Oceanography 35, 822-829].

Optimising stocking rate and grazing management to enhance environmental and production outcomes for native temperate grasslands

NASA Astrophysics Data System (ADS)

Badgery, Warwick; Zhang, Yingjun; Huang, Ding; Broadfoot, Kim; Kemp, David; Mitchell, David

2015-04-01

Stocking rate and grazing management can be altered to enhance the sustainable production of grasslands but the relative influence of each has not often been determined for native temperate grasslands. Grazing management can range from seasonal rests through to intensive rotational grazing involving >30 paddocks. In large scale grazing, it can be difficult to segregate the influence of grazing pressure from the timing of utilisation. Moreover, relative grazing pressure can change between years as seasonal conditions influence grassland production compared to the relative constant requirements of animals. This paper reports on two studies in temperate native grasslands of northern China and south eastern Australia that examined stocking rate and regionally relevant grazing management strategies. In China, the grazing experiment involved combinations of a rest, moderate or heavy grazing pressure of sheep in spring, then moderate or heavy grazing in summer and autumn. Moderate grazing pressure at 50% of the current district average, resulted in the better balance between maintaining productive and diverse grasslands, a profitable livestock system, and mitigation of greenhouse gases through increased soil carbon, methane uptake by the soil, and efficient methane emissions per unit of weight gain. Spring rests best maintained a desirable grassland composition, but had few other benefits and reduced livestock productivity due to lower feed quality from grazing later in the season. In Australia, the grazing experiment compared continuous grazing to flexible 4- and 20-paddock rotational grazing systems with sheep. Stocking rates were adjusted between systems biannually based on the average herbage mass of the grassland. No treatment degraded the perennial pasture composition, but ground cover was maintained at higher levels in the 20-paddock system even though this treatment had a higher stocking rate. Overall there was little difference in livestock production (e.g. kg lamb/ha), because individual animal performance was greater for continuous grazing than higher intensity grazing systems (4-Paddock and 20-Paddock). Differences in SOC, CO2 flux and erosion were determined by landscape position rather than grazing treatment. To remove the confounding influences of stocking rate and grazing management, the Ausfarm biophysical model, calibrated to the experimental treatments, examined the interaction between grazing management and stocking rates. Ground cover and profitability were similar between grazing systems at lower stocking rates (3 ewes per ha), but continuous grazing had higher profitability and lower ground cover above the optimum stocking rate of 4 ewes per ha. The findings of these two studies suggest that optimising stocking rate is more important than grazing management for a sustainable and profitable grazing system. Grazing management can further enhance environmental outcomes for an optimal stocking rate, but the findings from the Chinese study particularly highlight the need to look at multiple ecosystem services, when optimising systems. The Australian study also suggests the optimum stocking rate is dependent on the intensity of grazing management. Further work is required to understand the influence of landscape on grassland production and how stocking rates and grazing management can be sustainably optimised for different landscape areas to utilise this variation more effectively.

Community respiration/production and bacterial activity in the upper water column of the central Arctic Ocean

NASA Astrophysics Data System (ADS)

Sherr, Barry F.; Sherr, Evelyn B.

2003-04-01

Community metabolism (respiration and production) and bacterial activity were assessed in the upper water column of the central Arctic Ocean during the SHEBA/JOIS ice camp experiment, October 1997-September 1998. In the upper 50 m, decrease in integrated dissolved oxygen (DO) stocks over a period of 124 d in mid-winter suggested a respiration rate of ˜3.3 nM O 2 h -1 and a carbon demand of ˜4.5 gC m -2. Increase in 0-50 m integrated stocks of DO during summer implied a net community production of ˜20 gC m -2. Community respiration rates were directly measured via rate of decrease in DO in whole seawater during 72-h dark incubation experiments. Incubation-based respiration rates were on average 3-fold lower during winter (11.0±10.6 nM O 2 h -1) compared to summer (35.3±24.8 nM O 2 h -1). Bacterial heterotrophic activity responded strongly, without noticeable lag, to phytoplankton growth. Rate of leucine incorporation by bacteria (a proxy for protein synthesis and cell growth) increased ˜10-fold, and the cell-specific rate of leucine incorporation ˜5-fold, from winter to summer. Rates of production of bacterial biomass in the upper 50 m were, however, low compared to other oceanic regions, averaging 0.52±0.47 ngC l -1 h -1 during winter and 5.1±3.1 ngC l -1 h -1 during summer. Total carbon demand based on respiration experiments averaged 2.4±2.3 mgC m -3 d -1 in winter and 7.8±5.5 mgC m -3 d -1 in summer. Estimated bacterial carbon demand based on bacterial productivity and an assumed 10% gross growth efficiency was much lower, averaging about 0.12±0.12 mgC m -3 d -1 in winter and 1.3±0.7 mgC m -3 d -1 in summer. Our estimates of bacterial activity during summer were an order of magnitude less than rates reported from a summer 1994 study in the central Arctic Ocean, implying significant inter-annual variability of microbial processes in this region.

A comparison of the Health Star Rating system when used for restaurant fast foods and packaged foods.

PubMed

Dunford, Elizabeth K; Wu, Jason H Y; Wellard-Cole, Lyndal; Watson, Wendy; Crino, Michelle; Petersen, Kristina; Neal, Bruce

2017-10-01

In June 2014, the Australian government agreed to the voluntary implementation of an interpretive 'Health Star Rating' (HSR) front-of-pack labelling system for packaged foods. The aim of the system is to make it easier for consumers to compare the healthiness of products based on number of stars. With many Australians consuming fast food there is a strong rationale for extending the HSR system to include fast food items. To examine the performance of the HSR system when applied to fast foods. Nutrient content data for fast food menu items were collected from the websites of 13 large Australian fast-food chains. The HSR was calculated for each menu item. Statistics describing HSR values for fast foods were calculated and compared to results for comparable packaged foods. Data for 1529 fast food products were compared to data for 3810 packaged food products across 16 of 17 fast food product categories. The mean HSR for the fast foods was 2.5 and ranged from 0.5 to 5.0 and corresponding values for the comparator packaged foods were 2.6 and 0.5 to 5.0. Visual inspection of the data showed broadly comparable distributions of HSR values across the fast food and the packaged food categories, although statistically significant differences were apparent for seven categories (all p < 0.04). In some cases these differences reflected the large sample size and the power to detect small variations across fast foods and packaged food, and in others it appeared to reflect primarily differences in the mix of product types within a category. These data support the idea that the HSR system could be extended to Australian fast foods. There are likely to be significant benefits to the community from the use of a single standardised signposting system for healthiness across all fresh, packaged and restaurant foods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Numerical Study of Pressure Influence on Methane-Oxygen Laminar Counterflow Diffusion Flames

NASA Astrophysics Data System (ADS)

Iino, Kimio; Akamatsu, Fumiteru; Katsuki, Masashi

We carried out numerical studies on methane/oxygen diffusion flames of counter-flow configuration to elucidate the influence of pressure on flame structure, heat release rate and reaction mechanisms. The chemistry in gas-phase was based on GRI-Mech 3.0 database. The thickness of diffusion flame became thinner with increasing strain rate a , with its characteristic flame thickness varying inversely with √a, especially its relation became significant with increasing pressure. Flame temperature increased with increasing pressure. Enhanced H2O production reactions, especially chain terminal reactions for H2O production, were found to be important in determining the flame temperature at high pressures. The small reduction in the flame temperature with increasing strain rate at high pressures, compared to the atmospheric pressure, is caused by the capacitor effect of product dissociation. From QRPDs, the third body dependent reactions were enhanced in high pressure conditions, hence C2 pathway was enhanced.

LADEE/LDEX observations of lunar pickup ion distribution and variability

NASA Astrophysics Data System (ADS)

Poppe, A. R.; Halekas, J. S.; Szalay, J. R.; Horányi, M.; Levin, Z.; Kempf, S.

2016-04-01

We report fortuitous observations of low-energy lunar pickup ion fluxes near the Moon while in the solar wind by the Lunar Dust Experiment (LDEX) on board the Lunar Atmosphere and Dust Environment Explorer (LADEE). We describe the method of observation and the empirical calibration of the instrument for ion observations. LDEX observes several trends in the exospheric ion production rate, including a scale height of approximately 100 km, a positive, linear correlation with solar wind flux, and evidence of a slight enhancement near 7-8 h local time. We compare the LDEX observations to both LADEE Neutral Mass Spectrometer ion mode observations and theoretical models. The LDEX data are best fit by total exospheric ion production rates of ≈6 × 103 m-3 s-1 with dominant contributions from Al+, CO+, and Ar+, although the LDEX data suggest that the aluminum neutral density and corresponding ion production rate are lower than predicted by recent models.

Characterization of a mutated Geobacillus stearothermophilus L-arabinose isomerase that increases the production rate of D-tagatose.

PubMed

Kim, H-J; Kim, J-H; Oh, H-J; Oh, D-K

2006-07-01

Characterization of a mutated Geobacillus stearothermophilus L-arabinose isomerase used to increase the production rate of D-tagatose. A mutated gene was obtained by an error-prone polymerase chain reaction using L-arabinose isomerase gene from G. stearothermophilus as a template and the gene was expressed in Escherichia coli. The expressed mutated L-arabinose isomerase exhibited the change of three amino acids (Met322-->Val, Ser393-->Thr, and Val408-->Ala), compared with the wild-type enzyme and was then purified to homogeneity. The mutated enzyme had a maximum galactose isomerization activity at pH 8.0, 65 degrees C, and 1.0 mM Co2+, while the wild-type enzyme had a maximum activity at pH 8.0, 60 degrees C, and 1.0-mM Mn2+. The mutated L-arabinose isomerase exhibited increases in D-galactose isomerization activity, optimum temperature, catalytic efficiency (kcat/Km) for D-galactose, and the production rate of D-tagatose from D-galactose. The mutated L-arabinose isomerase from G. stearothermophilus is valuable for the commercial production of D-tagatose. This work contributes knowledge on the characterization of a mutated L-arabinose isomerase, and allows an increased production rate for D-tagatose from D-galactose using the mutated enzyme.

Depth distribution of microbial production and oxidation of methane in northern boreal peatlands.

PubMed

Sundh, I; Nilsson, M; Granberg, G; Svensson, B H

1994-05-01

The depth distributions of anaerobic microbial methane production and potential aerobic microbial methane oxidation were assessed at several sites in both Sphagnum- and sedge-dominated boreal peatlands in Sweden, and compared with net methane emissions from the same sites. Production and oxidation of methane were measured in peat slurries, and emissions were measured with the closed-chamber technique. Over all eleven sites sampled, production was, on average, highest 12 cm below the depth of the average water table. On the other hand, highest potential oxidation of methane coincided with the depth of the average water table. The integrated production rate in the 0-60 cm interval ranged between 0.05 and 1.7 g CH4 m (-2) day(-) and was negatively correlated with the depth of the average water table (linear regression: r (2) = 0.50, P = 0.015). The depth-integrated potential CH4-oxidation rate ranged between 3.0 and 22.1 g CH4 m(-2) day(-1) and was unrelated to the depth of the average water table. A larger fraction of the methane was oxidized at sites with low average water tables; hence, our results show that low net emission rates in these environments are caused not only by lower methane production rates, but also by conditions more favorable for the development of CH4-oxidizing bacteria in these environments.

Quality Assessment of Physical and Organoleptic Instant Corn Rice on Scale-Up Process

NASA Astrophysics Data System (ADS)

Kumalasari, R.; Ekafitri, R.; Indrianti, N.

2017-12-01

Development of instant corn rice product has been successfully conducted on a laboratory scale. Corn has high carbohydrate content but low in fiber. The addition of fiber in instant corn rice, intended to improve the functioning of the product, and replace fiber loss during the process. Scale up process of Instant corn rice required to increase the production capacity. Scale up was the process to get identic output on a larger scale based on predetermined production scale. This study aimed to assess the changes and differences in the quality of instant corn rice during scale up. Instant corn rice scale up was done on production capacity 3 kg, 4 kg and 5 kg. Results showed that scale up of instant corn rice producing products with rehydration ratio ranges between 514% - 570%, the absorption rate ranged between 414% - 470%, swelling rate ranging between 119% - 134%, bulk density ranged from 0.3661 to 0.4745 (g/ml) and porosity ranging between 30-37%. The physical quality of instant corn rice on scale up were stable from the ones at laboratory scale on swelling rate, rehydration ratio, and absorption rate but not stable on bulk density and porosity. Organoleptic qualities were stable at increased scale compared on a laboratory scale. Bulk density was higher than those at laboratory scale, and the porosity was lower than those at laboratory scale.

Early Performance Results from the GOES-R Product Generation System

NASA Astrophysics Data System (ADS)

Marley, S.; Weiner, A.; Kalluri, S. N.; Hansen, D.; Dittberner, G.

2013-12-01

Enhancements to remote sensing capabilities for the next generation of Geostationary Operational Environmental Satellite (GOES R-series) scheduled to be launched in 2015 require high performance computing capabilities to output meteorological observations and products at low latency compared to the legacy processing systems. GOES R-series (GOES-R, -S, -T, and -U) represents a generational change in both spacecraft and instrument capability, and the GOES Re-Broadcast (GRB) data which contains calibrated and navigated radiances from all the instruments will be at a data rate of 31 Mb/sec compared to the current 2.11 Mb/sec from existing GOES satellites. To keep up with the data processing rates, the Product Generation (PG) system in the ground segment is designed on a Service Based Architecture (SBA). Each algorithm is executed as a service and subscribes to the data it needs to create higher level products via an enterprise service bus. Various levels of product data are published and retrieved from a data fabric. Together, the SBA and the data fabric provide a flexible, scalable, high performance architecture that meets the needs of product processing now and can grow to accommodate new algorithms in the future. The algorithms are linked together in a precedence chain starting from Level 0 to Level 1b and higher order Level 2 products that are distributed to data distribution nodes for external users. Qualification testing for more than half the product algorithms has so far been completed the PG system.

Taxation of smokeless tobacco in India.

PubMed

Rout, S K; Arora, M

2014-12-01

The role of fiscal policy, especially taxation, though has been proved to be an effective instrument of tobacco control, its application is limited in India due to several reasons. This paper examines the tax structure, price and affordability of SLT products in order to provide evidence on how to strengthen the role of fiscal policy in tobacco control. Secondary data on tax structure and revenue from tobacco products were collected from the Ministry of Finance, Government of India. In order to measure the rise of prices corresponding to the increase in tax rate, the retail price index (RPI) and Whole Price Index (WPI) of SLT products were compared with the price index for all commodities for the period 2006-2012. The affordability of tobacco products is calculated by dividing prices of tobacco products by per capita income. During the last 6 years, the tax rate on SLT has gone up leading to a rise in the prices of SLT products more than the general price rise. However, the price rise is less than the per capita income growth indicating increasing affordability. The study observed a decline in the consumption of zarda and kahini due to the price increase during 2008-2013. However, the decline in the consumption of zarda is less compared with khaini due to a very low rise in its price. The prices should be raised more than the growth in income to influence consumption. Tax administration is a major challenge for SLT products and strengthening it could enhance revenue collection from SLT products.

xylA and xylB overexpression as a successful strategy for improving xylose utilization and poly-3-hydroxybutyrate production in Burkholderia sacchari.

PubMed

Guamán, Linda P; Oliveira-Filho, Edmar R; Barba-Ostria, Carlos; Gomez, José G C; Taciro, Marilda K; da Silva, Luiziana Ferreira

2018-03-01

Despite the versatility and many advantages of polyhydroxyalkanoates as petroleum-based plastic substitutes, their higher production cost compared to petroleum-based polymers has historically limited their large-scale production. One appealing approach to reducing production costs is to employ less expensive, renewable feedstocks. Xylose, for example is an abundant and inexpensive carbon source derived from hemicellulosic residues abundant in agro-industrial waste (sugarcane bagasse hemicellulosic hydrolysates). In this work, the production of poly-3-hydroxybutyrate P(3HB) from xylose was studied to develop technologies for conversion of agro-industrial waste into high-value chemicals and biopolymers. Specifically, this work elucidates the organization of the xylose assimilation operon of Burkholderia sacchari, a non-model bacterium with high capacity for P(3HB) accumulation. Overexpression of endogenous xylose isomerase and xylulokinase genes was successfully assessed, improving both specific growth rate and P(3HB) production. Compared to control strain (harboring pBBR1MCS-2), xylose utilization in the engineered strain was substantially improved with 25% increase in specific growth rate, 34% increase in P(3HB) production, and the highest P(3HB) yield from xylose reported to date for B. sacchari (Y P3HB/Xil  = 0.35 g/g). This study highlights that xylA and xylB overexpression is an effective strategy to improve xylose utilization and P(3HB) production in B. sacchari.

Improvement on the productivity of continuous tequila fermentation by Saccharomyces cerevisiae of Agave tequilana juice with supplementation of yeast extract and aeration.

PubMed

Hernández-Cortés, Guillermo; Valle-Rodríguez, Juan Octavio; Herrera-López, Enrique J; Díaz-Montaño, Dulce María; González-García, Yolanda; Escalona-Buendía, Héctor B; Córdova, Jesús

2016-12-01

Agave (Agave tequilana Weber var. azul) fermentations are traditionally carried out employing batch systems in the process of tequila manufacturing; nevertheless, continuous cultures could be an attractive technological alternative to increase productivity and efficiency of sugar to ethanol conversion. However, agave juice (used as a culture medium) has nutritional deficiencies that limit the implementation of yeast continuous fermentations, resulting in high residual sugars and low fermentative rates. In this work, fermentations of agave juice using Saccharomyces cerevisiae were put into operation to prove the necessity of supplementing yeast extract, in order to alleviate nutritional deficiencies of agave juice. Furthermore, continuous fermentations were performed at two different aeration flow rates, and feeding sterilized and non-sterilized media. The obtained fermented musts were subsequently distilled to obtain tequila and the preference level was compared against two commercial tequilas, according to a sensorial analysis. The supplementation of agave juice with air and yeast extract augmented the fermentative capacity of S. cerevisiae S1 and the ethanol productivities, compared to those continuous fermentations non supplemented. In fact, aeration improved ethanol production from 37 to 40 g L(-1), reducing sugars consumption from 73 to 88 g L(-1) and ethanol productivity from 3.0 to 3.2 g (Lh)(-1), for non-aerated and aerated (at 0.02 vvm) cultures, respectively. Supplementation of yeast extract allowed an increase in specific growth rate and dilution rates (0.12 h(-1), compared to 0.08 h(-1) of non-supplemented cultures), ethanol production (47 g L(-1)), reducing sugars consumption (93 g L(-1)) and ethanol productivity [5.6 g (Lh)(-1)] were reached. Additionally, the effect of feeding sterilized or non-sterilized medium to the continuous cultures was compared, finding no significant differences between both types of cultures. The overall effect of adding yeast extract and air to the continuous fermentations resulted in 88 % increase in ethanol productivity. For all cultures, pH was not controlled, reaching low pH values (from 2.6 to 3). This feature suggested a reduced probability of contamination for prolonged continuous cultures and explained why no significant differences were found between continuous cultures fed with sterilized or non-sterilized media. Concentrations of volatile compounds quantified in the distillates (tequila) were in the allowed ranges established by the Mexican regulation of tequila (NOM-006-SCFI-2012, Norma Oficial Mexicana: Bebidas alcohólicas-Tequila-specificaciones, 2012). The preference level of the distillates was similar to that of two well-known commercial tequilas. The results suggested the possibility of implementing this innovative technology on an industrial scale, attaining high productivities and using non-sterilized agave juice.

The slippery difficulty of ever containing drug resistance with current practices.

PubMed

Fullybright, R

2017-04-01

It has previously been shown that the rate of drug resistance emergence in medicine is exponential, while we have been producing drugs at a much lower rate. Our ability to successfully contain resistance at any one time is function of how many drugs we have at our disposal to counter new resistances from pathogens. Here, we assess our level of preparedness through a mathematical comparison of the drug manufacture rate by the pharmaceutical industry with the resistance emergence rate in pathogens. To that effect, changes in the rates of growth of the drugs production and resistance emergence processes are computed over multiple time segments and compared. It is found that new resistance emergence rate in infectious diseases medicine remains mathematically and permanently ahead of the drugs production rate by the pharmaceutical industry. Consequently, we are not in a position to ever contain current or future strengths of resistance from pathogens. A review of current practices is called for.

Application of Glomus sp. and Pseudomonas diminuta Reduce the Use of Chemical Fertilizers in Production of Potato Grown on Different Soil Types

NASA Astrophysics Data System (ADS)

Nurbaity, A.; Sofyan, E. T.; Hamdani, J. S.

2016-08-01

The use of high chemical fertilizer rates in potato production has been applied on the farm in Indonesia. Application of biofertilizer consists of arbuscular mycorrhizal fungi has been tested to reduce the use of NPK rates in production of potato and to determine whether different soil types will have different response to this biofertilizer. A greenhouse experiment was conducted using mixtures of spores of Glomus sp. and inoculant of mycorrhizal helper bacteria Pseudomonas diminuta, applied at different rates of NPK fertilizer (0, 25, 50, 75 and 100% of recommended rates) and different soil types (Andisols and Inceptisols). Results of experiment showed that application of Glomus sp. and P. diminuta reduced the use of NPK up to 50%, where the growth (plant height and tuber number), N,P,K uptake and tuber yields of potato had similar effect to the highest recommendation rate of NPK fertilizer. Inceptisols in general had better response to the biofertiliser compared to Andisols. Findings from this experiment confirmed the evidences that biofertilizer could reduce the use of chemical fertilizer, and the widely distributed soil in Indonesia such as Inceptisols, is potential to be used as a medium for potato production.

Sediment deposition from forest roads at stream crossings as influenced by road characteristics

Treesearch

A.J. Lang; W.M. Aust; M.C. Bolding; K.J. McGuire

2015-01-01

Recent controversies associated with ditched forest roads and stream crossings in the Pacific Northwest have focused national attention on sediment production and best management practices (BMPs) at stream crossings. Few studies have quantified soil erosion rates at stream crossings as influenced by road characteristics and compared them to modeled rates. Soil erosion...

Real-time monitoring of subsurface microbial metabolism with graphite electrodes

DOE PAGES

Wardman, Colin; Nevin, Kelly P.; Lovley, Derek R.

2014-11-21

Monitoring in situ microbial activity in anoxic submerged soils and aquatic sediments can be labor intensive and technically difficult, especially in dynamic environments in which a record of changes in microbial activity over time is desired. Microbial fuel cell concepts have previously been adapted to detect changes in the availability of relatively high concentrations of organic compounds in waste water but, in most soils and sediments, rates of microbial activity are not linked to the concentrations of labile substrates, but rather to the turnover rates of the substrate pools with steady state concentrations in the nM-μ M range. In ordermore » to determine whether levels of current produced at a graphite anode would correspond to the rates of microbial metabolism in anoxic sediments, small graphite anodes were inserted in sediment cores and connected to graphite brush cathodes in the overlying water. Currents produced were compared with the rates of [2- 14C]-acetate metabolism. There was a direct correlation between current production and the rate that [2- 14C]-acetate was metabolized to 14CO 2 and 14CH 4 in sediments in which Fe(III) reduction, sulfate reduction, or methane production was the predominant terminal electron-accepting process. At comparable acetate turnover rates, currents were higher in the sediments in which sulfate-reduction or Fe(III) reduction predominated than in methanogenic sediments. This was attributed to reduced products (Fe(II), sulfide) produced at distance from the anode contributing to current production in addition to the current that was produced from microbial oxidation of organic substrates with electron transfer to the anode surface in all three sediment types. In conclusion, the results demonstrate that inexpensive graphite electrodes may provide a simple strategy for real-time monitoring of microbial activity in a diversity of anoxic soils and sediments.« less

A study of the influence of experimentally induced hypothyroidism on antibody production and decay rates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnstone, Douglas E.; Howland, Joe W.; Michaelson, Solomon

1962-01-01

The effect of hypothyroidism induced by intravenous injections of I 131 on antibody production, the anamnestic response, and on antibody decay rate, compared to normal animals, was studied in 63 rabbits. After initial antigenic stimulation, normal animals reached a higher peak titer on an average of 5 days earlier than hypothyroid animals. Antibody half-life in these animals, as measured by time for antibody concentration to fall 50% from peak titer, was 11.4 days in normal compared to 21.3 days in hypothyroid animals. Following a second antigenic stimulation, normal rabbits reached a peak titer in an average of 6.4 days comparedmore » to 15 days for hypothyroid animals. The half-life for both groups was measured by determining the rate of disappearance of passively infused antibody. The half-life, thus measured, in normals was 2.4 plus or minus 0.2 days and was 8.8 plus or minus 1.9 days for hypothyroid animals. The time required for serum-tissue equilibration of infused antibody in normals was 1.0 plus or minus 0.00 days compared to 2.3 plus or minus 1.5 days in hypothyroid animals.« less

Tolerability and cosmetic acceptability of liquor carbonis distillate (coal tar) solution 15% as topical therapy for plaque psoriasis.

PubMed

Brouda, Irina; Edison, Brenda; Van Cott, Alicia; Green, Barbara A

2010-04-01

Although generally recognized as an effective therapy for psoriasis, coal tar therapy lost appeal in modern clinical practice due to poor patient acceptability of its aesthetic properties. A new liquor carbonis distillate (LCD) solution 15% (equivalent to coal tar 2.3%) that uses an evaporative and transparent vehicle, fragrance, and a dab-on applicator was developed. Cosmetic acceptability of the LCD solution was compared to calcipotriene cream 0.005% during a randomized, active-controlled, investigator-blinded clinical trial. Participants with moderate plaque psoriasis applied LCD solution or calcipotriene cream twice daily to body lesions for 12 weeks and then were followed for 6 additional weeks without treatment. Participants completed a cosmetic acceptability survey about their medications after starting therapy. Mean ratings for aesthetic and product performance attributes were high in both groups; however, more participants treated with LCD solution versus calcipotriene cream rated their product as more convenient and beneficial compared to prior psoriasis therapies. Ratings of the scent, staining, drying time, and dab-on applicator for the LCD solution were favorable. Participant experience with LCD solution in this study suggests that it is a cosmetically acceptable psoriasis treatment that is comparable to calcipotriene cream.

Impacts of drug reimbursement reductions on utilization and expenditures of oral antidiabetic medications in Taiwan: an interrupted time series study.

PubMed

Hsu, Jason C; Lu, Christine Y; Wagner, Anita K; Chan, K Arnold; Lai, Mei-Shu; Ross-Degnan, Dennis

2014-06-01

To control increasing pharmaceutical expenditures, Taiwan's National Health Insurance has implemented a series of drug reimbursement price reductions since 2000. This study examined changes in use and expenditures of oral antidiabetic medications following the price regulation in November 2006. We obtained claims data between January 2006 and August 2007 from Taiwan's National Health Insurance Research Database. We categorized oral antidiabetic products as affected by the reimbursement reduction ("targeted") or not ("non-targeted"), by level of relative price reduction, and by manufacturer type (international vs. local manufacturers). We used an interrupted time series design and segmented regression models to estimate changes in monthly per capita prescribing rate, volume, and insurance reimbursement expenditures following the policy. The majority (129/178; 72.5%) of oral antidiabetic products were targeted by this round of price reductions. There was a relative reduction of 9.5% [95%CI: -12.68, -6.32] in total expenditures at ten months post-policy compared to expected rates. For targeted products, there were 2.04% [95%CI: -4.15, 0.07] and 13.26% [95%CI: -16.64, -9.87] relative reductions in prescribing rate and expenditures, respectively, at ten months post-policy. Non-targeted products increased significantly (22% [95%CI: 10.49, 33.51] and 22.85% [95%CI: 11.69, 34.01] relative increases in prescribing rate and expenditures respectively). Larger reimbursement cuts led to greater reductions in prescribing rate, volume, and insurance reimbursement expenditures of targeted products. Prescribing rates of both targeted and non-targeted products by international manufacturers declined after the policy while rates of prescribing non-targeted products by local manufacturers increased. While total government expenditures for oral antidiabetic medications were contained by the policy, our results indicate that prescribing shifted at the margin from targeted to non-targeted products and from international to local products. Further research is warranted to understand how changes in medication use due to price regulation policies affect medication adherence and patient health outcomes. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Cell-production rates estimated by the use of vincristine sulphate and flow cytometry. I. An in vitro study using murine tumour cell lines.

PubMed

Barfod, I H; Barfod, N M

1980-01-01

A method for the evaluation of cell-production rates is described which combines flow cytometry (FCM) and the stathmokinetic method. By means of FCM it is possible to estimate the distribution of cells with G1, S and (G2 + M) DNA content in a population. As this method gives the relative (G2 + M) DNA content of cells within the cell cycle, it may be possible to evaluate cell-production rates by this technique. In the present study it was found that administration of a metaphase-arresting (stathmokinetic) agent, vincristine sulphate (VS), to asynchronous cell populations of three different murine tumour cell lines in vitro increased the peak representing cells with (G2 + M) DNA content as the number of mitotic (M) cells increased during the period of treatment. The accumulation of mitotic cells was determined by cell counts on smears under the microscope and compared with increase in the (G2 + M) DNA peak measured by FCM as a function of time after the administration of VS. Good agreement was obtained between the cell-production rates as estimated by FCM and by mitotic counts in all three cell lines investigated.

Maximizing the productivity of the microalgae Scenedesmus AMDD cultivated in a continuous photobioreactor using an online flow rate control.

PubMed

McGinn, Patrick J; MacQuarrie, Scott P; Choi, Jerome; Tartakovsky, Boris

2017-01-01

In this study, production of the microalga Scenedesmus AMDD in a 300 L continuous flow photobioreactor was maximized using an online flow (dilution rate) control algorithm. To enable online control, biomass concentration was estimated in real time by measuring chlorophyll-related culture fluorescence. A simple microalgae growth model was developed and used to solve the optimization problem aimed at maximizing the photobioreactor productivity. When optimally controlled, Scenedesmus AMDD culture demonstrated an average volumetric biomass productivity of 0.11 g L -1  d -1 over a 25 day cultivation period, equivalent to a 70 % performance improvement compared to the same photobioreactor operated as a turbidostat. The proposed approach for optimizing photobioreactor flow can be adapted to a broad range of microalgae cultivation systems.

Daily endogenous cortisol production and hydrocortisone pharmacokinetics in adult horses and neonatal foals.

PubMed

Hart, Kelsey A; Dirikolu, Levent; Ferguson, Duncan C; Norton, Natalie A; Barton, Michelle H

2012-01-01

To compare daily endogenous cortisol production rate and the pharmacokinetics of an i.v. bolus of hydrocortisone between neonatal foals and adult horses. 10 healthy full-term 2- to 4-day-old foals and 7 healthy adult horses. Blood samples were collected from each horse every 15 to 20 minutes for 24 hours for determination of 24-hour mean cortisol concentration. Afterward, dexamethasone (0.08 mg/kg) was administered i.v. to suppress endogenous cortisol production. Twelve hours afterward, hydrocortisone sodium succinate (1.0 mg/kg) was administered as a rapid i.v. bolus and serial blood samples were collected to determine hydrocortisone pharmacokinetics. Cortisol concentrations, daily cortisol production rate, and hydrocortisone pharmacokinetics were determined, and results were compared between adult horses and foals. The mean ± SD 24-hour cortisol concentration was significantly lower in foals (20 ± 4 ng/mL) than in horses (26 ± 6 ng/mL), but the daily cortisol production rate was significantly greater in foals (6,710 ± 320 ng/kg/d) than in horses (2,140 ± 400 ng/kg/d). For hydrocortisone, foals had a significantly greater volume of distribution at steady state (1.92 ± 1.11 L/kg) and total body clearance (1.39 ± 0.108 L/kg/h) and significantly lower peak plasma concentration (1,051 ± 343 ng/mL) than did horses (0.58 ± 0.15 L/kg, 0.349 ± 0.065 L/kg/h, and 8,934 ± 3,843 ng/mL, respectively). Important differences were detected in cortisol production and metabolism between neonatal foals and adult horses consistent with lower plasma protein binding of cortisol in foals. This decrease may contribute to cortisol insufficiency during prolonged critical illness in neonatal foals.

Bonded Cumomer Analysis of Human Melanoma Metabolism Monitored by 13C NMR Spectroscopy of Perfused Tumor Cells*

PubMed Central

Shestov, Alexander A.; Mancuso, Anthony; Lee, Seung-Cheol; Guo, Lili; Nelson, David S.; Roman, Jeffrey C.; Henry, Pierre-Gilles; Leeper, Dennis B.; Blair, Ian A.; Glickson, Jerry D.

2016-01-01

A network model for the determination of tumor metabolic fluxes from 13C NMR kinetic isotopomer data has been developed and validated with perfused human DB-1 melanoma cells carrying the BRAF V600E mutation, which promotes oxidative metabolism. The model generated in the bonded cumomer formalism describes key pathways of tumor intermediary metabolism and yields dynamic curves for positional isotopic enrichment and spin-spin multiplets. Cells attached to microcarrier beads were perfused with 26 mm [1,6-13C2]glucose under normoxic conditions at 37 °C and monitored by 13C NMR spectroscopy. Excellent agreement between model-predicted and experimentally measured values of the rates of oxygen and glucose consumption, lactate production, and glutamate pool size validated the model. ATP production by glycolytic and oxidative metabolism were compared under hyperglycemic normoxic conditions; 51% of the energy came from oxidative phosphorylation and 49% came from glycolysis. Even though the rate of glutamine uptake was ∼50% of the tricarboxylic acid cycle flux, the rate of ATP production from glutamine was essentially zero (no glutaminolysis). De novo fatty acid production was ∼6% of the tricarboxylic acid cycle flux. The oxidative pentose phosphate pathway flux was 3.6% of glycolysis, and three non-oxidative pentose phosphate pathway exchange fluxes were calculated. Mass spectrometry was then used to compare fluxes through various pathways under hyperglycemic (26 mm) and euglycemic (5 mm) conditions. Under euglycemic conditions glutamine uptake doubled, but ATP production from glutamine did not significantly change. A new parameter measuring the Warburg effect (the ratio of lactate production flux to pyruvate influx through the mitochondrial pyruvate carrier) was calculated to be 21, close to upper limit of oxidative metabolism. PMID:26703469

15 years of comet photometry: A comparative analysis of 80 comets

NASA Technical Reports Server (NTRS)

Osip, David J.; Schleicher, David G.; Millis, Robert L.; Hearn, M. F. A.; Birch, P. V.

1992-01-01

In 1976 we began a program of narrowband photometry of comets that has encompassed well over 400 nights of observations. To date, the program has provided detailed information on 80 comets, 11 of which have been observed on multiple apparitions. In this paper we present the observed range of compositions (molecular production rate ratios) and dustiness (gas production compared with AF-rho) for a well sampled group of comets. Based on these results we present preliminary analysis of taxonomic groupings as well as the abundance ratios we associate with a 'typical' comet.

Yeast Biomass Production in Brewery's Spent Grains Hemicellulosic Hydrolyzate

NASA Astrophysics Data System (ADS)

Duarte, Luís C.; Carvalheiro, Florbela; Lopes, Sónia; Neves, Ines; Gírio, Francisco M.

Yeast single-cell protein and yeast extract, in particular, are two products which have many feed, food, pharmaceutical, and biotechnological applications. However, many of these applications are limited by their market price. Specifically, the yeast extract requirements for culture media are one of the major technical hurdles to be overcome for the development of low-cost fermentation routes for several top value chemicals in a biorefinery framework. A potential biotechnical solution is the production of yeast biomass from the hemicellulosic fraction stream. The growth of three pentose-assimilating yeast cell factories, Debaryomyces hansenii, Kluyveromyces marxianus, and Pichia stipitis was compared using non-detoxified brewery's spent grains hemicellulosic hydrolyzate supplemented with mineral nutrients. The yeasts exhibited different specific growth rates, biomass productivities, and yields being D. hansenii as the yeast species that presented the best performance, assimilating all sugars and noteworthy consuming most of the hydrolyzate inhibitors. Under optimized conditions, D. hansenii displayed a maximum specific growth rate, biomass yield, and productivity of 0.34 h-1, 0.61 g g-1, and 0.56 g 1-1 h-1, respectively. The nutritional profile of D. hansenii was thoroughly evaluated, and it compares favorably to others reported in literature. It contains considerable amounts of some essential amino acids and a high ratio of unsaturated over saturated fatty acids.

The flexibility of a distant loop modulates active site motion and product release in ribonuclease A.

PubMed

Doucet, Nicolas; Watt, Eric D; Loria, J Patrick

2009-08-04

The role of the flexible loop 1 in protein conformational motion and in the dissociation of enzymatic product from ribonuclease A (RNase A) was investigated by creation of a chimeric enzyme in which a 6-residue loop 1 from the RNase A homologue, eosinophil cationic protein (ECP), replaced the 12-residue loop 1 in RNase A. The chimera (RNase A(ECP)) experiences only local perturbations in NMR backbone chemical shifts compared to WT RNase A. Many of the flexible residues that were previously identified in WT as involved in an important conformational change now experience no NMR-detected millisecond motions in the chimera. Likewise, binding of the product analogue, 3'-CMP, to RNase A(ECP) results in only minor chemical shift changes in the enzyme similar to what is observed for the H48A mutant of RNase A and in contrast to WT enzyme. For both RNase A(ECP) and H48A there is a 10-fold decrease in the product release rate constant, k(off), compared to WT, in agreement with previous studies indicating the importance of flexibility in RNase A in the overall rate-limiting product release step. Together, these NMR and biochemical experiments provide additional insight into the mechanism of millisecond motions in the RNase A catalytic cycle.

Are Methods for Estimating Primary Production and the Growth Rates of Phytoplankton Approaching Agreement?

NASA Astrophysics Data System (ADS)

Cullen, J. J.

2016-02-01

During the 1980s, estimates of primary productivity and the growth rates of phytoplankton in oligotrophic waters were controversial, in part because rates based on seasonal accumulations of oxygen in the shallow oxygen maximum were reported to be much higher than could be accounted for with measurements of photosynthesis based on incubations with C-14. Since then, much has changed: tested and standardized methods have been employed to collect comprehensive time-series observations of primary production and related oceanographic properties in oligotrophic waters of the North Pacific subtropical gyre and the Sargasso Sea; technical and theoretical advances have led to new tracer-based estimates of photosynthesis (e.g., oxygen/argon and triple isotopes of dissolved oxygen); and biogeochemical sensor systems on ocean gliders and profiling floats can describe with unprecedented resolution the dynamics of phytoplankton, oxygen and nitrate as driven by growth, loss processes including grazing, and vertical migration for nutrient acquisition. Meanwhile, the estimation of primary productivity, phytoplankton biomass and phytoplankton growth rates from remote sensing of ocean color has matured, complementing biogeochemical models that describe and predict these key properties of plankton dynamics. In a selective review focused on well-studied oligotrophic waters, I compare methods for estimating the primary productivity and growth rates of phytoplankton to see if they are converging on agreement, not only in the estimated rates, but also in the underlying assumptions, such as the ratio of gross- to net primary production — and how this relates to the measurement — and the ratio of chlorophyll to carbon in phytoplankton. Examples of agreement are encouraging, but some stark contrasts illustrate the need for improved mechanistic understanding of exactly what each method is measuring.

Bioelectrochemical enhancement of methane production from highly concentrated food waste in a combined anaerobic digester and microbial electrolysis cell.

PubMed

Park, Jungyu; Lee, Beom; Tian, Donjie; Jun, Hangbae

2018-01-01

A microbial electrolysis cell (MEC) is a promising technology for enhancing biogas production from an anaerobic digestion (AD) reactor. In this study, the effects of the MEC on the rate of methane production from food waste were examined by comparing an AD reactor with an AD reactor combined with a MEC (AD+MEC). The use of the MEC accelerated methane production and stabilization via rapid organic oxidation and rapid methanogenesis. Over the total experimental period, the methane production rate and stabilization time of the AD+MEC reactor were approximately 1.7 and 4.0 times faster than those of the AD reactor. Interestingly however, at the final steady state, the methane yields of both the reactors were similar to the theoretical maximum methane yield. Based on these results, the MEC did not increase the methane yield over the theoretical value, but accelerated methane production and stabilization by bioelectrochemical reactions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Possible Catalytic Effects of Ice Particles on the Production of NOx by Lightning Discharges

NASA Technical Reports Server (NTRS)

2010-01-01

One mechanism by which NO(x) is produced in the atmosphere is heating in lightning discharge channels. Since most viable proposed electrification mechanisms involve ice crystals, it is reasonable to assume that lightning discharge channels frequently pass through fields of ice particles of various kinds. We address the question of whether ice crystals may serve as catalysts for the production of NO(x) by lightning discharges. If so, and if the effect is large, it would need to be taken into account in estimates of global NO(x) production by lightning. In this study, we make a series of plausible assumptions about the temperature and concentration of reactant species in the environment of discharges and we postulate a mechanism by which ice crystals are able to adsorb nitrogen atoms. We then compare production rates between uncatalyzed and catalytic reactions at 2000 K, 3000 K, and 4000 K. Catalyzed NO production rates are greater at 2000 K, whereas uncatalyzed production occurs most rapidly at 4000 K. 2010

Comparing in situ removal strategies for improving styrene bioproduction.

PubMed

McKenna, Rebekah; Moya, Luis; McDaniel, Matthew; Nielsen, David R

2015-01-01

As an important conventional monomer compound, the biological production of styrene carries significant promise with respect to creating novel sustainable materials. Since end-product toxicity presently limits styrene production by previously engineered Escherichia coli, in situ product removal by both solvent extraction and gas stripping were explored as process-based strategies for circumventing its inhibitory effects. In solvent extraction, the addition of bis(2-ethylhexyl)phthalate offered the greatest productivity enhancement, allowing net volumetric production of 836 ± 64 mg/L to be reached, representing a 320 % improvement over single-phase cultures. Gas stripping rates, meanwhile, were controlled by rates of bioreactor agitation and, to a greater extent, aeration. A periodic gas stripping protocol ultimately enabled up to 561 ± 15 mg/L styrene to be attained. Lastly, by relieving the effects of styrene toxicity, new insight was gained regarding subsequent factors limiting its biosynthesis in E. coli and strategies for future strain improvement are discussed.

Wastewater treatment high rate algal ponds (WWT HRAP) for low-cost biofuel production.

PubMed

Mehrabadi, Abbas; Craggs, Rupert; Farid, Mohammed M

2015-05-01

Growing energy demand and water consumption have increased concerns about energy security and efficient wastewater treatment and reuse. Wastewater treatment high rate algal ponds (WWT HRAPs) are a promising technology that could help solve these challenges concurrently where climate is favorable. WWT HRAPs have great potential for biofuel production as a by-product of WWT, since the costs of algal cultivation and harvest for biofuel production are covered by the wastewater treatment function. Generally, 800-1400 GJ/ha/year energy (average biomass energy content: 20 GJ/ton; HRAP biomass productivity: 40-70 tons/ha/year) can be produced in the form of harvestable biomass from WWT HRAP which can be used to provide community-level energy supply. In this paper the benefits of WWT HRAPs are compared with conventional mass algal culture systems. Moreover, parameters to effectively increase algal energy content and overall energy production from WWT HRAP are discussed including selection of appropriate algal biomass biofuel conversion pathways. Copyright © 2014 Elsevier Ltd. All rights reserved.

Color and chemistry on Triton

NASA Technical Reports Server (NTRS)

Thompson, W. Reid; Sagan, Carl

1990-01-01

The surface of Triton is very bright but shows subtle yellow to peach hues which probably arise from the production of colored organic compounds from CH4 + N2 and other simple species. In order to investigate possible relationships between chemical processes and the observed surface distribution of chromophores, the surface units are classified according to color/albedo properties, the rates of production of organic chromophores by the action of ultraviolet light and high-energy charged particles is estimated, and rates, spectral properties, and expected seasonal redistribution processes are compared to suggest possible origins of the colors seen on Triton's surface.

Distinguishing hyperhidrosis and normal physiological sweat production: new data and review of hyperhidrosis data for 1980-2013.

PubMed

Thorlacius, Linnea; Gyldenløve, Mette; Zachariae, Claus; Carlsen, Berit C

2015-10-01

Hyperhidrosis is a condition in which the production of sweat is abnormally increased. No objective criteria for the diagnosis of hyperhidrosis exist, mainly because reference intervals for normal physiological sweat production at rest are unknown. The main objective of this study was to establish reference intervals for normal physiological axillary and palmar sweat production. Gravimetric testing was performed in 75 healthy control subjects. Subsequently, these results were compared with findings in a cohort of patients with hyperhidrosis and with the results derived from a review of data on hyperhidrosis published between 1980 and 2013. Approximately 90% of the controls had axillary and palmar sweat production rates of below 100 mg/5 min. In all except one of the axillary and palmar hyperhidrosis studies reviewed, average sweat production exceeded 100 mg/5 min. A sweat production rate of 100 mg/5 min as measured by gravimetric testing may be a reasonable cut-off value for distinguishing axillary and palmar hyperhidrosis from normal physiological sweat production. © 2015 The International Society of Dermatology.

Prostaglandins are important in thermoregulation of a reptile (Pogona vitticeps).

PubMed Central

Seebacher, Frank; Franklin, Craig E

2003-01-01

The effectiveness of behavioural thermoregulation in reptiles is amplified by cardiovascular responses, particularly by differential rates of heart beat in response to heating and cooling (heart-rate hysteresis). Heart-rate hysteresis is ecologically important in most lineages of ectothermic reptile, and we demonstrate that heart-rate hysteresis in the lizard Pogona vitticeps is mediated by prostaglandins. In a control treatment (administration of saline), heart rates during heating were significantly faster than during cooling at any given body temperature. When cyclooxygenase 1 and 2 enzymes were inhibited, heart rates during heating were not significantly different from those during cooling. Administration of agonists showed that thromboxane B(2) did not have a significant effect on heart rate, but prostacyclin and prostaglandin F(2alpha) caused a significant increase (3.5 and 13.6 beats min(-1), respectively) in heart rate compared with control treatments. We speculate that heart-rate hysteresis evolved as a thermoregulatory mechanism that may ultimately be controlled by neurally induced stimulation of nitric oxide production, or maybe via photolytically induced production of vitamin D. PMID:12952634

Prostaglandins are important in thermoregulation of a reptile (Pogona vitticeps).

PubMed

Seebacher, Frank; Franklin, Craig E

2003-08-07

The effectiveness of behavioural thermoregulation in reptiles is amplified by cardiovascular responses, particularly by differential rates of heart beat in response to heating and cooling (heart-rate hysteresis). Heart-rate hysteresis is ecologically important in most lineages of ectothermic reptile, and we demonstrate that heart-rate hysteresis in the lizard Pogona vitticeps is mediated by prostaglandins. In a control treatment (administration of saline), heart rates during heating were significantly faster than during cooling at any given body temperature. When cyclooxygenase 1 and 2 enzymes were inhibited, heart rates during heating were not significantly different from those during cooling. Administration of agonists showed that thromboxane B(2) did not have a significant effect on heart rate, but prostacyclin and prostaglandin F(2alpha) caused a significant increase (3.5 and 13.6 beats min(-1), respectively) in heart rate compared with control treatments. We speculate that heart-rate hysteresis evolved as a thermoregulatory mechanism that may ultimately be controlled by neurally induced stimulation of nitric oxide production, or maybe via photolytically induced production of vitamin D.

Sweat production during global heating and during isometric exercise in people with diabetes.

PubMed

Petrofsky, Jerrold Scott; Lee, Scott; Patterson, Chris; Cole, Melissa; Stewart, Brian

2005-11-01

While sweat production in response to heat is impaired in people with diabetes, sweat production has not been examined during isometric exercise. Eight subjects with type 2 diabetes and 9 control subjects exerted a fatiguing isometric contraction of the handgrip muscles at a tension of 40% of the maximum voluntary strength (MVC) after exposure to a 32 deg C environment for 30 min. compared to 10 controls and 10 subjects with diabetes exposed to a 39 deg C environment. Sweat was impaired to all areas of the body during heat exposure in patients with diabetes under both environmental conditions. For example, on the chest, the average sweat rates after exposure to the 32 deg environment was 259.2 +/- 55.2 nanoliters/min in control subjects and 198.3 +/- 46.2 nanoliters/min for subjects with diabetes. Compared to the 32 deg C environment, control subjects increased sweat in all 4 areas proportionally more than subjects with diabetes. Sudomotor rhythm was present in sweat in control subjects at a rate of repetition of 11 and 50 seconds but almost absent in subjects with diabetes. During exercise, sweat rates slowly increased from the beginning to the end of the exercise. But the head of the subjects with diabetes showed hypersweating while the other areas showed diminished sweating compared to control subjects. Thus some of the impairment in sweating may be due to central mechanisms associated with heat sensitivity or in the hypothalamus and not to the sweat glands themselves.

Partitioning Effects during Terminal Carbon and Electron Flow in Sediments of a Low-Salinity Meltwater Pond near Bratina Island, McMurdo Ice Shelf, Antarctica

PubMed Central

Mountfort, Douglas O.; Kaspar, Heinrich F.; Downes, Malcolm; Asher, Rodney A.

1999-01-01

A study of anaerobic sediments below cyanobacterial mats of a low-salinity meltwater pond called Orange Pond on the McMurdo Ice Shelf at temperatures simulating those in the summer season (<5°C) revealed that both sulfate reduction and methane production were important terminal anaerobic processes. Addition of [2-14C]acetate to sediment samples resulted in the passage of label mainly to CO2. Acetate addition (0 to 27 mM) had little effect on methanogenesis (a 1.1-fold increase), and while the rate of acetate dissimilation was greater than the rate of methane production (6.4 nmol cm−3 h−1 compared to 2.5 to 6 nmol cm−3 h−1), the portion of methane production attributed to acetate cleavage was <2%. Substantial increases in the methane production rate were observed with H2 (2.4-fold), and H2 uptake was totally accounted for by methane production under physiological conditions. Formate also stimulated methane production (twofold), presumably through H2 release mediated through hydrogen lyase. Addition of sulfate up to 50-fold the natural levels in the sediment (interstitial concentration, ∼0.3 mM) did not substantially inhibit methanogenesis, but the process was inhibited by 50-fold chloride (36 mM). No net rate of methane oxidation was observed when sediments were incubated anaerobically, and denitrification rates were substantially lower than rates for sulfate reduction and methanogenesis. The results indicate that carbon flow from acetate is coupled mainly to sulfate reduction and that methane is largely generated from H2 and CO2 where chloride, but not sulfate, has a modulating role. Rates of methanogenesis at in situ temperatures were four- to fivefold less than maximal rates found at 20°C. PMID:10584008

Efficacy of Selected Insecticides Applied to Hybrid Rice Seed

PubMed Central

Adams, A.; Gore, J.; Musser, F.; Cook, D.; Walker, T.; Dobbins, C.

2016-01-01

Hybrid rice and insecticide seed treatments targeting rice water weevil, Lissorhoptrus oryzophilus Kuschel, have altered the landscape of rice production. The effect of reduced seeding rates on seed treatment efficacy in hybrid rice has not been studied. During 2011 and 2012, an experiment was conducted at seven locations to determine the relationship between low seeding rates used in hybrid rice and efficacy of selected insecticidal seed treatments as measured by rice water weevil densities and yield. Labeled rates of thiamethoxam, chlorantraniliprole, and clothianidin were compared with higher rates of these products to determine if labeled rates provide an acceptable level of control of the rice water weevil. Study locations were divided into low, moderate, and high groups based on rice water weevil larval densities. All seed treatments and seed treatment rates reduced rice water weevil densities. However, there was no observed yield or economic benefit from the use of an insecticidal seed treatment in areas of low pressure. Differences in yield were observed among seed treatments and seed treatment rates in moderate and high pressure locations, and all seed treatments yielded better than the untreated plots, but these differences were not always economical. All seed treatments showed an economic advantage in areas of high weevil pressure, and there were no differences among seed treatment products or rates, suggesting that currently labeled seed treatment rates in hybrid rice are effective for rice water weevil management. PMID:26537671

Learning trajectories for speech motor performance in children with specific language impairment.

PubMed

Richtsmeier, Peter T; Goffman, Lisa

2015-01-01

Children with specific language impairment (SLI) often perform below expected levels, including on tests of motor skill and in learning tasks, particularly procedural learning. In this experiment we examined the possibility that children with SLI might also have a motor learning deficit. Twelve children with SLI and thirteen children with typical development (TD) produced complex nonwords in an imitation task. Productions were collected across three blocks, with the first and second blocks on the same day and the third block one week later. Children's lip movements while producing the nonwords were recorded using an Optotrak camera system. Movements were then analyzed for production duration and stability. Movement analyses indicated that both groups of children produced shorter productions in later blocks (corroborated by an acoustic analysis), and the rate of change was comparable for the TD and SLI groups. A nonsignificant trend for more stable productions was also observed in both groups. SLI is regularly accompanied by a motor deficit, and this study does not dispute that. However, children with SLI learned to make more efficient productions at a rate similar to their peers with TD, revealing some modification of the motor deficit associated with SLI. The reader will learn about deficits commonly associated with specific language impairment (SLI) that often occur alongside the hallmark language deficit. The authors present an experiment showing that children with SLI improved speech motor performance at a similar rate compared to typically developing children. The implication is that speech motor learning is not impaired in children with SLI. Copyright © 2015 Elsevier Inc. All rights reserved.

Scalar Dyon Production In Near Extremal Kerr-Newman Black Holes

NASA Astrophysics Data System (ADS)

Chen, Chiang-Mei; Kim, Sang Pyo; Sun, Jia-Rui; Tang, Fu-Yi

2018-01-01

The pair production of charged scalar dyons is analytically studied in near-extremal Kerr-Newman (KN) dyonic black holes. The pair production rate and its thermal interpretation are given. Moreover, the absorption cross section ratio has been compared with the two-point function of the conformal field theories (CFTs) holographically dual to the near horizon geometry, namely warped AdS3, of the near extremal Kerr-Newman black holes to verify the threefold dyonic KN/CFTs correspondence.

Maximum Entropy Production As a Framework for Understanding How Living Systems Evolve, Organize and Function

NASA Astrophysics Data System (ADS)

Vallino, J. J.; Algar, C. K.; Huber, J. A.; Fernandez-Gonzalez, N.

2014-12-01

The maximum entropy production (MEP) principle holds that non equilibrium systems with sufficient degrees of freedom will likely be found in a state that maximizes entropy production or, analogously, maximizes potential energy destruction rate. The theory does not distinguish between abiotic or biotic systems; however, we will show that systems that can coordinate function over time and/or space can potentially dissipate more free energy than purely Markovian processes (such as fire or a rock rolling down a hill) that only maximize instantaneous entropy production. Biological systems have the ability to store useful information acquired via evolution and curated by natural selection in genomic sequences that allow them to execute temporal strategies and coordinate function over space. For example, circadian rhythms allow phototrophs to "predict" that sun light will return and can orchestrate metabolic machinery appropriately before sunrise, which not only gives them a competitive advantage, but also increases the total entropy production rate compared to systems that lack such anticipatory control. Similarly, coordination over space, such a quorum sensing in microbial biofilms, can increase acquisition of spatially distributed resources and free energy and thereby enhance entropy production. In this talk we will develop a modeling framework to describe microbial biogeochemistry based on the MEP conjecture constrained by information and resource availability. Results from model simulations will be compared to laboratory experiments to demonstrate the usefulness of the MEP approach.

A Comparison of Ambulatory Surgery Center Production Costs and Medicare Payments: Evidence on Colonoscopy and Endoscopy.

PubMed

Mitchell, Jean M; Carey, Kathleen

2016-02-01

Ambulatory surgery centers (ASCs) are freestanding facilities that specialize in surgical and diagnostic procedures that do not require an overnight stay. While it is generally assumed that ASCs are less costly than hospital outpatient surgery departments, there is sparse empirical evidence regarding their relative production costs. To estimate ASC production costs using financial and claims records for procedures performed by surgery centers that specialize in gastroenterology procedures (colonoscopy and endoscopy). We estimate production costs in ASCs that specialize in gastroenterology procedures using financial cost and patient discharge data from Pennsylvania for the time period 2004-2013. We focus on the 2 primary procedures (colonoscopies and endoscopies) performed at each ASC. We use our estimates to predict average costs for each procedure and then compare predicted costs to Medicare ACS payments for these procedures. Comparisons of the costs of each procedure with 2013 national Medicare ASC payment rates suggest that Medicare payments exceed production costs for both colonoscopy and endoscopy. This study demonstrated that it is feasible to estimate production costs for procedures performed in freestanding surgery centers. The procedure-specific cost estimates can then be compared with ASC payment rates to ascertain if payments are aligned with costs. This approach can serve as an evaluation template for CMS and private insurers who are concerned that ASC facility payments for specific procedures may be excessive.

Sulfide and methane production in sewer sediments.

PubMed

Liu, Yiwen; Ni, Bing-Jie; Ganigué, Ramon; Werner, Ursula; Sharma, Keshab R; Yuan, Zhiguo

2015-03-01

Recent studies have demonstrated significant sulfide and methane production by sewer biofilms, particularly in rising mains. Sewer sediments in gravity sewers are also biologically active; however, their contribution to biological transformations in sewers is poorly understood at present. In this study, sediments collected from a gravity sewer were cultivated in a laboratory reactor fed with real wastewater for more than one year to obtain intact sediments. Batch test results show significant sulfide production with an average rate of 9.20 ± 0.39 g S/m(2)·d from the sediments, which is significantly higher than the areal rate of sewer biofilms. In contrast, the average methane production rate is 1.56 ± 0.14 g CH4/m(2)·d at 20 °C, which is comparable to the areal rate of sewer biofilms. These results clearly show that the contributions of sewer sediments to sulfide and methane production cannot be ignored when evaluating sewer emissions. Microsensor and pore water measurements of sulfide, sulfate and methane in the sediments, microbial profiling along the depth of the sediments and mathematical modelling reveal that sulfide production takes place near the sediment surface due to the limited penetration of sulfate. In comparison, methane production occurs in a much deeper zone below the surface likely due to the better penetration of soluble organic carbon. Modelling results illustrate the dependency of sulfide and methane productions on the bulk sulfate and soluble organic carbon concentrations can be well described with half-order kinetics. Copyright © 2014 Elsevier Ltd. All rights reserved.

Site Productivity and Tree Mortality on New Frontiers of Gypsy Moth Infestation

Treesearch

David A. Gansner; David A. Gansner

1987-01-01

Recent analysis of forest stand losses to gypsy moth has provided basic information for analyzing the relationship between forest site productivity and tree mortality on new frontiers of infestation. Poor timber-growing sites had the lowest rates of mortality. Oak mortality (number of trees) amounted to 18 percent on poor sites compared with 26 percent on medium and 28...

Evaluation of a rapid determination of heat production and respiratory quotient in Holstein steers using the washed rumen technique

USDA-ARS?s Scientific Manuscript database

The objective of this study was to validate use of the washed rumen technique for rapid measurement of fasting heat production (FHP) and respiratory quotient (RQ), and compare this with heart rate (HR) and core temperature (CT). The experiment used 8 Holstein steers (322±30 kg) under controlled temp...

Logging costs and cutting methods in young-growth ponderosa pine in California

Treesearch

Philip M. McDonald; William A. Atkinson; Dale O. Hall

1969-01-01

Mixed-conifer stands at the Challenge Experimental Forest, Calif., were cut to four specifications: seed-tree, group selection, single tree selection, and clearcut. Logging costs and production rates were compared and evaluated. Cutting method had little effect on felling or skidding production; felling ranged from 1,802 to 2,019 bd ft per hour, and skidding from 3,138...

Comparison and feasibility of North American methods for harvesting small trees and residues for energy

Treesearch

Bruce R. Hartsough; Bryce J. Stokes

1990-01-01

A database of North American harvesting systems was developed. Parameters for each system included site, material and product characteristics, equipment mix and production rate. Onto-truck and delivered costs per green tonne, and breakeven oil prices were developed using standard costing methods. Systems costs were compared over the ranges of piece size, volume per...

A nutrient profiling assessment of packaged foods using two star-based front-of-pack labels.

PubMed

Carrad, Amy M; Louie, Jimmy Chun Yu; Yeatman, Heather R; Dunford, Elizabeth K; Neal, Bruce C; Flood, Victoria M

2016-08-01

To compare two front-of-pack nutrition labelling systems for the assessment of packaged foods and drinks with Australian Dietary Guidelines. A cross-sectional nutrient profiling assessment. Food and drink products (n 20 225) were categorised into scoring levels using criteria for the Institute of Medicine (IOM) three-star system and the five-star Australian Health Star Rating (HSR). The effectiveness of these systems to categorise foods in accordance with Australian Dietary Guidelines was explored. The study was conducted in Australia, using a comprehensive food database. Packaged food and drink products (n 20 225) available in Australia. Using the IOM three-star system, the majority (55 %) of products scored the minimum 0 points and 25·5 % scored the maximum 3 points. Using HSR criteria, the greatest proportion of products (15·2 %) scored three-and-a-half stars from a possible five and 12·5 % received the lowest rating of a half-star. Very few products (4·1 %) scored five stars. Products considered core foods and drinks in Australian Dietary Guidelines received higher scores than discretionary foods in all food categories for both labelling systems (all P<0·05; Mann-Whitney U test), with the exception of fish products using IOM three-star criteria (P=0·603). The largest discrepancies in median score between the two systems were for the food categories edible oils, convenience foods and dairy. Both the IOM three-star and Australian HSR front-of-pack labelling systems rated packaged foods and drinks broadly in line with Australian Dietary Guidelines by assigning core foods higher ratings and discretionary foods lower ratings.

Phototrophic cultivation of NaCl-tolerant mutant of Spirulina platensis for enhanced C-phycocyanin production under optimized culture conditions and its dynamic modeling.

PubMed

Gupta, Apurva; Mohan, Devendra; Saxena, Rishi Kumar; Singh, Surendra

2018-02-01

Commercial cultivation of Spirulina sp. is highly popular due to the presence of high amount of C-phycocyanin (C-PC) and other valuable chemicals like carotenoids and γ-linolenic acid. In this study, the pH and the concentrations of nitrogen and carbon source were manipulated to achieve improved cell growth and C-PC production in NaCl-tolerant mutant of Spirulina platensis. In this study, highest C-PC (147 mg · L -1 ) and biomass (2.83 g · L -1 ) production was achieved when a NaCl-tolerant mutant of S. platensis was cultivated in a nitrate and bicarbonate sufficient medium (40 and 60 mM, respectively) at pH 9.0 under phototrophic conditions. Kinetic study of wildtype S. platensis and its NaCl-tolerant mutant was also done to determine optimum nitrate concentrations for maximum growth and C-PC production. Kinetic parameter of inhibition (Haldane model) was fitted to the relationship between specific growth rate and substrate concentration obtained from the growth curves. Results showed that the maximum specific growth rate (μ max ) for NaCl-tolerant mutant increased by 17.94% as compared to its wildtype counterpart, with a slight increase in half-saturation constant (K s ), indicating that this strain could grow well at high concentration of NaNO 3 . C-PC production rate (C max ) in mutant cells increased by 12.2% at almost half the value of K s as compared to its wildtype counterpart. Moreover, the inhibition constant (K i ) value was 207.85% higher in NaCl-tolerant mutant as compared to its wildtype strain, suggesting its ability to produce C-PC even at high concentrations of NaNO 3 . © 2017 Phycological Society of America.

Kinetics and product identification of the reactions of (E)-2-hexenyl acetate and 4-methyl-3-penten-2-one with OH radicals and Cl atoms at 298 K and atmospheric pressure

NASA Astrophysics Data System (ADS)

Gaona-Colmán, Elizabeth; Blanco, María B.; Teruel, Mariano A.

2017-07-01

Rate coefficients for the reactions of hydroxyl radicals and chlorine atoms with two biogenic volatile organic compounds as (E)-2-hexenyl acetate and 4-methyl-3-penten-2-one have been determined at 298 K and atmospheric pressure. The decay of the organics was followed using a chromatograph with a flame ionization detector (GC-FID) and the rate constants were determined using a relative rate method. Rate coefficients are found to be (in cm3 molecule-1 s-1): k1(OH + (E)-2-hexenyl acetate) = (6.88 ± 1.41) × 10-11, k2(Cl + (E)-2-hexenyl acetate) = (3.10 ± 1.13) × 10-10, k3(OH + 4-methyl-3-penten-2-one) = (1.02 ± 0.20) × 10-10 and k4(Cl + 4-methyl-3-penten-2-one) = (2.66 ± 0.90) × 10-10 at 298 K. This is the first kinetic experimental study for these reactions studied under atmospheric pressure. The rate coefficients are compared with previous determinations for other unsaturated and oxygenated compounds and reactivity trends are presented. Products identification studies were performed using solid-phase microextraction (SPME) method employing on-fiber products derivatization with o-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine hydrochloride using gas chromatograph with a mass spectrometer detector (GC-MS) for the reactions studied. In addition, atmospheric lifetimes of the unsaturated compounds studied are estimated and compared with other tropospheric sinks for these compounds.

Effects of flow field on the metabolic characteristics of Streptomyces lincolnensis in the industrial fermentation of lincomycin.

PubMed

Li, Xiao; Zhang, Jiang; Tan, Ya-Li; Li, Zhi-Hong; Yu, Xue-Feng; Xia, Jian-Ye; Chu, Ju; Ge, You-Qun

2013-01-01

In this work, the flow field in the existing fermentor with radial-flow impellers (C1) was studied using the computational fluid dynamics (CFD) software package Fluent, then the fermentor with radial-axial flow impellers (C2) was constructed and was compared with the C1 fermentor by CFD and experimental research. The simulation results revealed that the flow field in C2 fermentor had characteristics such as higher turbulent kinetic energy, gas holdup and shear rates. Metabolic variables of Streptomyces lincolnensis in the two fermentors such as carbon and nitrogen source consumption rates, specific growth rates (μ), hyphae morphologies, and lincomycin productivities were further explored. The correlation analysis between the experimental measurements and the simulation results indicated that the hyphae clustering and dry cell weight (DCW) decreasing at production stage were eliminated in C2 fermentor, which had higher gas volumetric mass transfer coefficient (K(L)a), dissolved oxygen (DO) concentration and consumption rates of nutrient materials. When C2 was employed in the fermentor, the specific growth rate of S. lincolnensis at growth stage was higher, and the maintenance metabolism together with secondary metabolism at production stage was kept at higher levels. As a result, the yield of lincomycin was achieved 7039 μg ml(-1) when the 60 m(3) industrial fermentor was equipped with C2, which was increased by 46% compared to that obtained in the C1 fermentor. Copyright © 2012 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

The 2-Oxoacid Dehydrogenase Complexes in Mitochondria Can Produce Superoxide/Hydrogen Peroxide at Much Higher Rates Than Complex I*

PubMed Central

Quinlan, Casey L.; Goncalves, Renata L. S.; Hey-Mogensen, Martin; Yadava, Nagendra; Bunik, Victoria I.; Brand, Martin D.

2014-01-01

Several flavin-dependent enzymes of the mitochondrial matrix utilize NAD+ or NADH at about the same operating redox potential as the NADH/NAD+ pool and comprise the NADH/NAD+ isopotential enzyme group. Complex I (specifically the flavin, site IF) is often regarded as the major source of matrix superoxide/H2O2 production at this redox potential. However, the 2-oxoglutarate dehydrogenase (OGDH), branched-chain 2-oxoacid dehydrogenase (BCKDH), and pyruvate dehydrogenase (PDH) complexes are also capable of considerable superoxide/H2O2 production. To differentiate the superoxide/H2O2-producing capacities of these different mitochondrial sites in situ, we compared the observed rates of H2O2 production over a range of different NAD(P)H reduction levels in isolated skeletal muscle mitochondria under conditions that favored superoxide/H2O2 production from complex I, the OGDH complex, the BCKDH complex, or the PDH complex. The rates from all four complexes increased at higher NAD(P)H/NAD(P)+ ratios, although the 2-oxoacid dehydrogenase complexes produced superoxide/H2O2 at high rates only when oxidizing their specific 2-oxoacid substrates and not in the reverse reaction from NADH. At optimal conditions for each system, superoxide/H2O2 was produced by the OGDH complex at about twice the rate from the PDH complex, four times the rate from the BCKDH complex, and eight times the rate from site IF of complex I. Depending on the substrates present, the dominant sites of superoxide/H2O2 production at the level of NADH may be the OGDH and PDH complexes, but these activities may often be misattributed to complex I. PMID:24515115

Process relevant screening of cellulolytic organisms for consolidated bioprocessing.

PubMed

Antonov, Elena; Schlembach, Ivan; Regestein, Lars; Rosenbaum, Miriam A; Büchs, Jochen

2017-01-01

Although the biocatalytic conversion of cellulosic biomass could replace fossil oil for the production of various compounds, it is often not economically viable due to the high costs of cellulolytic enzymes. One possibility to reduce costs is consolidated bioprocessing (CBP), integrating cellulase production, hydrolysis of cellulose, and the fermentation of the released sugars to the desired product into one process step. To establish such a process, the most suitable cellulase-producing organism has to be identified. Thereby, it is crucial to evaluate the candidates under target process conditions. In this work, the chosen model process was the conversion of cellulose to the platform chemical itaconic acid by a mixed culture of a cellulolytic fungus with Aspergillus terreus as itaconic acid producer. Various cellulase producers were analyzed by the introduced freeze assay that measures the initial carbon release rate, quantifying initial cellulase activity under target process conditions. Promising candidates were then characterized online by monitoring their respiration activity metabolizing cellulose to assess the growth and enzyme production dynamics. The screening of five different cellulase producers with the freeze assay identified Trichoderma   reesei and Penicillium   verruculosum as most promising. The measurement of the respiration activity revealed a retarded induction of cellulase production for P.   verruculosum but a similar cellulase production rate afterwards, compared to T.   reesei . The freeze assay measurement depicted that P.   verruculosum reaches the highest initial carbon release rate among all investigated cellulase producers. After a modification of the cultivation procedure, these results were confirmed by the respiration activity measurement. To compare both methods, a correlation between the measured respiration activity and the initial carbon release rate of the freeze assay was introduced. The analysis revealed that the different initial enzyme/cellulose ratios as well as a discrepancy in cellulose digestibility are the main differences between the two approaches. With two complementary methods to quantify cellulase activity and the dynamics of cellulase production for CBP applications, T.   reesei and P.   verruculosum were identified as compatible candidates for the chosen model process. The presented methods can easily be adapted to screen for suitable cellulose degrading organisms for various other applications.

Carbon dioxide utilisation of Dunaliella tertiolecta for carbon bio-mitigation in a semicontinuous photobioreactor.

PubMed

Farrelly, Damien J; Brennan, Liam; Everard, Colm D; McDonnell, Kevin P

2014-04-01

Bio-fixation of carbon dioxide (CO2) by microalgae has been recognised as an attractive approach to offset anthropogenic emissions. Biological carbon mitigation is the process whereby autotrophic organisms, such as microalgae, convert CO2 into organic carbon and O2 through photosynthesis; this process through respiration produces biomass. In this study Dunaliella tertiolecta was cultivated in a semicontinuous culture to investigate the carbon mitigation rate of the system. The algae were produced in 1.2-L Roux bottles with a working volume of 1 L while semicontinuous production commenced on day 4 of cultivation when the carbon mitigation rate was found to be at a maximum for D. tertiolecta. The reduction in CO2 between input and output gases was monitored to predict carbon fixation rates while biomass production and microalgal carbon content are used to calculate the actual carbon mitigation potential of D. tertiolecta. A renewal rate of 45 % of flask volume was utilised to maintain the culture in exponential growth with an average daily productivity of 0.07 g L(-1) day(-1). The results showed that 0.74 g L(-1) of biomass could be achieved after 7 days of semicontinuous production while a total carbon mitigation of 0.37 g L(-1) was achieved. This represented an increase of 0.18 g L(-1) in carbon mitigation rate compared to batch production of D. tertiolecta over the same cultivation period.

Atmospheric nitrogen deposition influences denitrification and nitrous oxide production in lakes.

PubMed

McCrackin, Michelle L; Elser, James J

2010-02-01

Microbially mediated denitrification is an important process that may ameliorate the effects of nitrogen (N) loading by permanently removing excess N inputs. In this study, we measured the rate of denitrification and nitrous oxide (N2O) production during denitrification in sediments from 32 Norwegian lakes at the high and low ends of a gradient of atmospheric N deposition. Denitrification and N2O production rates averaged 41.7 and 1.1 micromol N x m(-2) x h(-1), respectively, for high-deposition lakes. There was no detectable denitrification or N2O production in low-deposition lakes. Epilimnetic nitrate concentration was strongly correlated with denitrification rate (r2 = 0.67). We also measured the denitrification rate in response to experimental additions of organic carbon, nitrate, and phosphorus. Experimental nitrate additions stimulated denitrification in sediments of all lakes, regardless of N deposition level. In fact, the rate of denitrification in nitrate-amended treatments was the same magnitude for lakes in both deposition areas. These findings suggest that lake sediments possess considerable capacity to remove nitrate and that this capacity has not been saturated under conditions of chronic N loading. Further, nitrous oxide was nearly 3% of the total gaseous product during denitrification in high-deposition lakes, a fraction that is comparable to polluted marine sediments. Our findings suggest that, while lakes play an important role in N removal in the landscape, they may be a source of N2O emissions, especially in areas subject to elevated N inputs.

Photochemical free radical production rates in the eastern Caribbean

NASA Astrophysics Data System (ADS)

Dister, Brian; Zafiriou, Oliver C.

1993-02-01

Potential photochemical production rates of total (NO-scavengeable) free radicals were surveyed underway (> 900 points) in the eastern Caribbean and Orinoco delta in spring and fall 1988. These data document seasonal trends and large-scale (˜ 10-1000 km) variability in the pools of sunlight-generated reactive transients, which probably mediate a major portion of marine photoredox transformations. Radical production potential was detectable in all waters and was reasonably quantifiable at rates above 0.25 nmol L-1 min-1 sun-1. Radical production rates varied from ˜ 0.1-0.5 nmol L-1 min-1 of full-sun illumination in "blue water" to > 60 nmol L-1 min-1 in some estuarine waters in the high-flow season. Qualitatively, spatiotemporal potential rate distributions strikingly resembled that of "chlorophyll" (a riverine-influence tracer of uncertain specificity) in 1979-1981 CZCS images of the region [Müller-Karger et al., 1988] at all scales. Basin-scale occurrence of greatly enhanced rates in fall compared to spring is attributed to terrestrial chromophore inputs, primarily from the Orinoco River, any contributions from Amazon water and nutrient-stimulus effects could not be resolved. A major part of the functionally photoreactive colored organic matter (COM) involved in radical formation clearly mixes without massive loss out into high-salinity waters, although humic acids may flocculate in estuaries. A similar conclusion applies over smaller scales for COM as measured optically [Blough et al., this issue]. Furthermore, optical absorption and radical production rates were positively correlated in the estuarine region in fall. These cruises demonstrated that photochemical techniques are now adequate to treat terrestrial photochemical chromophore inputs as an estuarine mixing problem on a large scale, though the ancillary data base does not currently support such an analysis in this region. Eastern Caribbean waters are not markedly more reactive at comparable salinities than waters of the Gulf of Maine and North Atlantic Bight, despite large inputs of colored waters from two large tropical rivers with substantial "black water" tributaries. Other sources of reactive COM, such as grazing, sedimentary diagenesis, and "marine humus" may increase temperate waters' photoreactivity; alternatively, northern waters may be chromophore-rich because they are light-poor and photobleaching is a major sink of photoreactive COM.

Staying on Task: Can a Thinking Skills Approach Support a Productive Pedagogy for Inclusion?

ERIC Educational Resources Information Center

Baumfield, Vivienne; Devlin, Niall

2005-01-01

This study investigates the effects of a thinking skills approach on the on task rates of pupils with Special Educational Needs (SEN). There were three situations: two experimental and one controlled. The experimental situations compared on task rates of 19 primary-aged pupils with SEN in thinking skills (TS) and non-thinking skills (XTS) lessons.…

STELLAR ENCOUNTER RATE IN GALACTIC GLOBULAR CLUSTERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahramian, Arash; Heinke, Craig O.; Sivakoff, Gregory R.

2013-04-01

The high stellar densities in the cores of globular clusters cause significant stellar interactions. These stellar interactions can produce close binary mass-transferring systems involving compact objects and their progeny, such as X-ray binaries and radio millisecond pulsars. Comparing the numbers of these systems and interaction rates in different clusters drives our understanding of how cluster parameters affect the production of close binaries. In this paper we estimate stellar encounter rates ({Gamma}) for 124 Galactic globular clusters based on observational data as opposed to the methods previously employed, which assumed 'King-model' profiles for all clusters. By deprojecting cluster surface brightness profilesmore » to estimate luminosity density profiles, we treat 'King-model' and 'core-collapsed' clusters in the same way. In addition, we use Monte Carlo simulations to investigate the effects of uncertainties in various observational parameters (distance, reddening, surface brightness) on {Gamma}, producing the first catalog of globular cluster stellar encounter rates with estimated errors. Comparing our results with published observations of likely products of stellar interactions (numbers of X-ray binaries, numbers of radio millisecond pulsars, and {gamma}-ray luminosity) we find both clear correlations and some differences with published results.« less

Linear extension rates and gross carbonate production of Acropora cervicornis at Coral Gardens, Belize.

NASA Astrophysics Data System (ADS)

Peeling, E.; Greer, L.; Lescinsky, H.; Humston, R.; Wirth, K. R.; Baums, I. B.; Curran, A.

2014-12-01

Branching Acropora coral species have fast growth and carbonate production rates, and thus have functioned as important reef-building species throughout the Pleistocene and Holocene. Recently, net carbonate production (kg CaCO3 m-2 year-1) has been recognized as an important measure of reef health, especially when monitoring endangered species, such as Acropora cervicornis. This study examines carbonate production in a thriving population of A. cervicornis at the Coral Gardens reef in Belize. Photographic surveys were conducted along five transects of A. cervicornis-dominated reefs from 2011-2014. Matching photographs from 2013 and 2014 were scaled to 1 m2 and compared to calculate 84 individual A. cervicornis linear extension rates across the reef. Linear extension rates averaged 12.4 cm/yr and were as high as 17 cm/yr in some areas of the reef. Carbonate production was calculated two ways. The first followed the standard procedure of multiplying percent live coral cover, by the linear extension rate and skeletal density. The second used the number of live coral tips per square meter in place of percent live coral multiplied by the average cross-sectional area of the branches. The standard method yielded a carbonate production rate of 113 kg CaCO3 m-2 year-1 for the reef, and the tip method yielded a rate of 6 kg m-2 year-1. We suggest that the tip method is a more accurate measure of production, because A. cervicornis grows primarily from the live tips, with only limited radial growth and resheeting over dead skeleton. While this method omits the contributions of radial growth and resheeting, and is therefore somewhat of an underestimate, our future work will quantify these aspects of growth in a more complete carbonate budget. Still, our estimate suggests a carbonate production rate per unit area of A. cervicornis that is on par with other Caribbean coral species, rather than two orders of magnitude higher as reported by Perry et al (2013). Although gross coral production at Coral Gardens is high by Caribbean standards, further assessment is required to understand the complete carbonate budget and how well live coral growth may balance bio-erosion or future predicted high CO2 acidification at this site.

Left Ventricular Wall Stress-Mass-Heart Rate Product and Cardiovascular Events in Treated Hypertensive Patients: LIFE Study.

PubMed

Devereux, Richard B; Bang, Casper N; Roman, Mary J; Palmieri, Vittorio; Boman, Kurt; Gerdts, Eva; Nieminen, Markku S; Papademetriou, Vasilios; Wachtell, Kristian; Hille, Darcy A; Dahlöf, Björn

2015-11-01

In the Losartan Intervention for End Point Reduction in Hypertension (LIFE) study, 4.8 years' losartan- versus atenolol-based antihypertensive treatment reduced left ventricular hypertrophy and cardiovascular end points, including cardiovascular death and stroke. However, there was no difference in myocardial infarction (MI), possibly related to greater reduction in myocardial oxygen demand by atenolol-based treatment. Myocardial oxygen demand was assessed indirectly by the left ventricular mass×wall stress×heart rate (triple product) in 905 LIFE participants. The triple product was included as time-varying covariate in Cox models assessing predictors of the LIFE primary composite end point (cardiovascular death, MI, or stroke), its individual components, and all-cause mortality. At baseline, the triple product in both treatment groups was, compared with normal adults, elevated in 70% of patients. During randomized treatment, the triple product was reduced more by atenolol, with prevalences of elevated triple product of 39% versus 51% on losartan (both P≤0.001). In Cox regression analyses adjusting for age, smoking, diabetes mellitus, and prior stroke, MI, and heart failure, 1 SD lower triple product was associated with 23% (95% confidence interval 13%-32%) fewer composite end points, 31% (18%-41%) less cardiovascular mortality, 30% (15%-41%) lower MI, and 22% (11%-33%) lower all-cause mortality (all P≤0.001), without association with stroke (P=0.34). Although losartan-based therapy reduced ventricular mass more, greater heart rate reduction with atenolol resulted in larger reduction of the triple product. Lower triple product during antihypertensive treatment was strongly, independently associated with lower rates of the LIFE primary composite end point, cardiovascular death, and MI, but not stroke. © 2015 American Heart Association, Inc.

Taste CREp: the Cosmic-Ray Exposure program

NASA Astrophysics Data System (ADS)

Martin, Léo; Blard, Pierre-Henri; Balco, Greg; Lavé, Jérôme; Delunel, Romain; Lifton, Nathaniel

2017-04-01

We present here the CREp program and the ICE-D production rate database, an online system to compute Cosmic Ray Exposure (CRE) ages with cosmogenic 3He and 10Be (crep.crpg.cnrs-nancy.fr). The CREp calculator is designed to automatically reflect the current state of the global calibration database production rate stored in ICE-D (http://calibration.ice-d.org). ICE-D will be regularly updated in order to incorporate new calibration data and reflect the current state of the available literature. The CREp program permits to calculate ages in a flexible way: 1) Two scaling models are available, i.e. i) the empirical Lal-Stone time-dependent model (Balco et al., 2008; Lal, 1991; Stone, 2000) with the muon parameters of Braucher et al. (2011), and ii) the Lifton-Sato-Dunai (LSD) theoretical model (Lifton et al., 2014). 2) Users may also test the impact of the atmosphere model, using either i) the ERA-40 database (Uppala et al., 2005), or ii) the standard atmosphere (N.O.A.A., 1976). 3) For the time-dependent correction, users or choose among the three proposed geomagnetic datasets (Lifton, 2016; Lifton et al., 2014; Muscheler et al., 2005) or import their own database. 4) For the important choice of the production rate, CREp is linked to a database of production rate calibration data, ICE-D. This database includes published empirical calibration rate studies that are publicly available at present, including those of the CRONUS-Earth and CRONUS-EU projects, as well as studies from other projects. Users may select the production rates either: i) using a worldwide mean value, ii) a regionally averaged value (not available in regions with no data), iii) a local unique value, which can be chosen among the existing dataset or imported by the user, or iv) any combination of single or multiple calibration data. We tested the efficacy of the different scaling models by looking at the statistical dispersion of the computed Sea Level High Latitude (SLHL) calibrated production rates. Lal/Stone and LSD models have comparable efficacies, and the impact of the tested atmospheric model and the geomagnetic database is also limited. If a global mean is chosen, the 1σ uncertainty arising from the production rate is about 5% for 10Be and 10% for 3He. If a regional production rate is picked, these uncertainties are potentially lower.

Renal mitochondrial impairment is attenuated by AT1 blockade in experimental Type I diabetes.

PubMed

de Cavanagh, Elena M V; Ferder, León; Toblli, Jorge E; Piotrkowski, Bárbara; Stella, Inés; Fraga, Cesar G; Inserra, Felipe

2008-01-01

To investigate whether ANG II type 1 (AT(1)) receptor blockade could protect kidney mitochondria in streptozotocin-induced Type 1 diabetes, we treated 8-wk-old male Sprague-Dawley rats with a single streptozotocin injection (65 mg/kg ip; STZ group), streptozotocin and drinking water containing either losartan (30 mg.kg(-1).day(-1); STZ+Los group) or amlodipine (3 mg.kg(-1).day(-1); STZ+Amlo group), or saline (intraperitoneally) and pure water (control group). Four-month-long losartan or amlodipine treatments started 30 days before streptozotocin injection to improve the antioxidant defenses. The number of renal lesions, plasma glucose and lipid levels, and proteinuria were higher and creatinine clearance was lower in STZ and STZ+Amlo compared with STZ+Los and control groups. Glycemia was higher in STZ+Los compared with control. Blood pressure, basal mitochondrial membrane potential and mitochondrial pyruvate content, and renal oxidized glutathione levels were higher and NADH/cytochrome c oxidoreductase activity was lower in STZ compared with the other groups. In STZ and STZ+Amlo groups, mitochondrial H(2)O(2) production rate was higher and uncoupling protein-2 content, cytochrome c oxidase activity, and renal glutathione level were lower than in STZ+Los and control groups. Mitochondrial nitric oxide synthase activity was higher in STZ+Amlo compared with the other groups. Mitochondrial pyruvate content and H(2)O(2) production rate negatively contributed to electron transfer capacity and positively contributed to renal lesions. Uncoupling protein-2 content negatively contributed to mitochondrial H(2)O(2) production rate and renal lesions. Renal glutathione reduction potential positively contributed to mitochondria electron transfer capacity. In conclusion, AT(1) blockade protects kidney mitochondria and kidney structure in streptozotocin-induced diabetes independently of blood pressure and glycemia.

Microbial Mercury Cycling in Sediments of the San Francisco Bay-Delta

USGS Publications Warehouse

Marvin-DiPasquale, M.; Agee, J.L.

2003-01-01

Microbial mercury (Hg) methylation and methylmercury (MeHg) degradation processes were examined using radiolabled model Hg compounds in San Francisco Bay-Delta surface sediments during three seasonal periods: late winter, spring, and fall. Strong seasonal and spatial differences were evident for both processes. MeHg production rates were positively correlated with microbial sulfate reduction rates during late winter only. MeHg production potential was also greatest during this period and decreased during spring and fall. This temporal trend was related both to an increase in gross MeHg degradation, driven by increasing temperature, and to a build-up in pore water sulfide and solid phase reduced sulfur driven by increased sulfate reduction during the warmer seasons. MeHg production decreased sharply with depth at two of three sites, both of which exhibited a corresponding increase in reduced sulfur compounds with depth. One site that was comparatively oxidized and alkaline exhibited little propensity for net MeHg production. These results support the hypothesis that net MeHg production is greatest when and where gross MeHg degradation rates are low and dissolved and solid phase reduced sulfur concentrations are low.

Microbial mercury cycling in sediments of the San Francisco Bay-Delta

USGS Publications Warehouse

Marvin-DiPasquale, Mark; Agee, Jennifer L.

2003-01-01

Microbial mercury (Hg) methylation and methylmercury (MeHg) degradation processes were examined using radiolabled model Hg compounds in San Francisco Bay-Delta surface sediments during three seasonal periods: late winter, spring, and fall. Strong seasonal and spatial differences were evident for both processes. MeHg production rates were positively correlated with microbial sulfate reduction rates during late winter only. MeHg production potential was also greatest during this period and decreased during spring and fall. This temporal trend was related both to an increase in gross MeHg degradation, driven by increasing temperature, and to a build-up in pore water sulfide and solid phase reduced sulfur driven by increased sulfate reduction during the warmer seasons. MeHg production decreased sharply with depth at two of three sites, both of which exhibited a corresponding increase in reduced sulfur compounds with depth. One site that was comparatively oxidized and alkaline exhibited little propensity for net MeHg production. These results support the hypothesis that net MeHg production is greatest when and where gross MeHg degradation rates are low and dissolved and solid phase reduced sulfur concentrations are low.

South Asians have elevated postexercise blood pressure and myocardial oxygen consumption compared to Europeans despite equivalent resting pressure.

PubMed

Chaturvedi, Nish; Bathula, Rajaram; Shore, Angela C; Panerai, Ronney; Potter, John; Kooner, Jaspal; Chambers, John; Hughes, Alun D

2012-10-01

Stroke mortality rate is higher in South Asians than in Europeans, despite equivalent or lower resting blood pressure (BP). Elevated recovery BP after exercise predicts stroke, independently of resting values. We hypothesized that South Asians would have adverse postexercise hemodynamics and sought explanations for this. A population-based sample of 147 European and 145 South Asian middle-aged men and women performed the Dundee 3-minute step test. Cardiovascular risk factors were measured. BP, heart rate, and rate-pressure product, a measure of myocardial oxygen consumption, were compared. With 90% power and 5% significance, we could detect a difference of 0.38 of a standard deviation in any outcome measure. Resting systolic BP was similar in South Asians (144 mm Hg) and Europeans (142 mm Hg) (P=0.2), as was exercise BP (P=0.4). However, recovery systolic BP at 3 minutes after exercise was higher in South Asians by 4.3 mm Hg (95% confidence interval [CI], 0.2 to 8.3 mm Hg; P=0.04). This effect persisted when adjusted for exercise BP and work effort (5.4 mm Hg [95% CI, 2.2 to 8.7 mm Hg; P=0.001]). Adjustment for baroreflex insensitivity and greater aortic stiffness in South Asians contributes greatly to attenuating this ethnic difference (1.9 mm Hg [95% CI, -0.9 to 4.6 mm Hg; P=0.4]). Similarly, rate-pressure product recovery after exercise was impaired in South Asians by 735 mm Hg/min (95% CI, 137 to 1334 mm Hg/min; P=0.02); again, adjustment for baroreflex insensitivity and aortic stiffness attenuated this difference (261 mm Hg/min [95% CI, -39 to 561 mm Hg/min; P=0.3]). Postexercise recovery of BP and rate-pressure product is impaired in South Asians compared to Europeans even though resting and exercise BP are similar. This is associated with the autonomic dysfunction and aortic stiffness in South Asians.

Optimizing rice yields while minimizing yield-scaled global warming potential.

PubMed

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

Solar Versus Fission Surface Power for Mars

NASA Technical Reports Server (NTRS)

Rucker, Michelle A.; Oleson, Steve; George, Pat; Landis, Geoffrey A.; Fincannon, James; Bogner, Amee; Jones, Robert E.; Turnbull, Elizabeth; McNatt, Jeremiah; Martini, Michael C.;

Enhanced cortisol production rates, free cortisol, and 11beta-HSD-1 expression correlate with visceral fat and insulin resistance in men: effect of weight loss.

PubMed

Purnell, Jonathan Q; Kahn, Steven E; Samuels, Mary H; Brandon, David; Loriaux, D Lynn; Brunzell, John D

2009-02-01

Controversy exists as to whether endogenous cortisol production is associated with visceral obesity and insulin resistance in humans. We therefore quantified cortisol production and clearance rates, abdominal fat depots, insulin sensitivity, and adipocyte gene expression in a cohort of 24 men. To test whether the relationships found are a consequence rather than a cause of obesity, eight men from this larger group were studied before and after weight loss. Daily cortisol production rates (CPR), free cortisol levels (FC), and metabolic clearance rates (MCR) were measured by stable isotope methodology and 24-h sampling; intra-abdominal fat (IAF) and subcutaneous fat (SQF) by computed tomography; insulin sensitivity (S(I)) by frequently sampled intravenous glucose tolerance test; and adipocyte 11beta-hydroxysteroid dehydrogenase-1 (11beta-HSD-1) gene expression by quantitative RT-PCR from subcutaneous biopsies. Increased CPR and FC correlated with increased IAF, but not SQF, and with decreased S(I). Increased 11beta-HSD-1 gene expression correlated with both IAF and SQF and with decreased S(I). With weight loss, CPR, FC, and MCR did not change compared with baseline; however, with greater loss in body fat than lean mass during weight loss, both CPR and FC increased proportionally to final fat mass and IAF and 11beta-HSD-1 decreased compared with baseline. These data support a model in which increased hypothalamic-pituitary-adrenal activity in men promotes selective visceral fat accumulation and insulin resistance and may promote weight regain after diet-induced weight loss, whereas 11beta-HSD-1 gene expression in SQF is a consequence rather than cause of adiposity.

A model of the productivity of the northern pintail

USGS Publications Warehouse

Carlson, J.D.; Clark, W.R.; Klaas, E.E.

1993-01-01

We adapted a stochastic computer model to simulate productivity of the northern pintail (Anas acuta). Researchers at the Northern Prairie Wildlife Research Center of the U.S. Fish and Wildlife Service originally developed the model to simulate productivity of the mallard (A. platyrhynchos). We obtained data and descriptive information on the breeding biology of pintails from a literature review and from discussions with waterfowl biologists. All biological parameters in the productivity component of the mallard model (e.g, initial body weights, weight loss during laying and incubation, incubation time, clutch size, nest site selection characteristics) were compared with data on pintails and adjusted accordingly. The function in the mallard model that predicts nest initiation in response to pond conditions adequately mimicked pintail behavior and did not require adjustment.Recruitment rate was most sensitive to variations in parameters that control nest success, seasonal duckling survival rate, and yearling and adult body weight. We simulated upland and wetland habitat conditions in central North Dakota and compared simulation results with observed data. Simulated numbers were not significantly different from observed numbers of successful nests during wet, average, and dry wetland conditions. The simulated effect of predator barrier fencing in a study area in central North Dakota increased recruitment rate by an average of 18.4%. This modeling synthesized existing knowledge on the breeding biology of the northern pintail, identified necessary research, and furnished a useful tool for the examination and comparison of various management options.

Display of phytase on the cell surface of Saccharomyces cerevisiae to degrade phytate phosphorus and improve bioethanol production.

PubMed

Chen, Xianzhong; Xiao, Yan; Shen, Wei; Govender, Algasan; Zhang, Liang; Fan, You; Wang, Zhengxiang

2016-03-01

Currently, development of biofuels as an alternative fuel has gained much attention due to resource and environmental challenges. Bioethanol is one of most important and dominant biofuels, and production using corn or cassava as raw materials has become a prominent technology. However, phytate contained in the raw material not only decreases the efficiency of ethanol production, but also leads to an increase in the discharge of phosphorus, thus impacting on the environment. In this study, to decrease phytate and its phosphorus content in an ethanol fermentation process, Saccharomyces cerevisiae was engineered through a surface-displaying system utilizing the C-terminal half of the yeast α-agglutinin protein. The recombinant yeast strain, PHY, was constructed by successfully displaying phytase on the surface of cells, and enzyme activity reached 6.4 U/g wet biomass weight. Ethanol productions using various strains were compared, and the results demonstrated that the specific growth rate and average fermentation rate of the PHY strain were higher 20 and 18 %, respectively, compared to the control strain S. cerevisiae CICIMY0086, in a 5-L bioreactor process by simultaneous saccharification and fermentation. More importantly, the phytate phosphorus concentration decreased by 89.8 % and free phosphorus concentration increased by 142.9 % in dry vinasse compared to the control in a 5-L bioreactor. In summary, we constructed a recombinant S. cerevisiae strain displaying phytase on the cell surface, which could improve ethanol production performance and effectively reduce the discharge of phosphorus. The strain reported here represents a useful novel engineering platform for developing an environment-friendly system for bioethanol production from a corn substrate.

Methane production enhancement by an independent cathode in integrated anaerobic reactor with microbial electrolysis.

PubMed

Cai, Weiwei; Han, Tingting; Guo, Zechong; Varrone, Cristiano; Wang, Aijie; Liu, Wenzong

2016-05-01

Anaerobic digestion (AD) represents a potential way to achieve energy recovery from waste organics. In this study, a novel bioelectrochemically-assisted anaerobic reactor is assembled by two AD systems separated by anion exchange membrane, with the cathode placing in the inside cylinder (cathodic AD) and the anode on the outside cylinder (anodic AD). In cathodic AD, average methane production rate goes up to 0.070 mL CH4/mL reactor/day, which is 2.59 times higher than AD control reactor (0.027 m(3) CH4/m(3)/d). And COD removal is increased ∼15% over AD control. When changing to sludge fermentation liquid, methane production rate has been further increased to 0.247 mL CH4/mL reactor/day (increased by 51.53% comparing with AD control). Energy recovery efficiency presents profitable gains, and economic revenue from increased methane totally self-cover the cost of input electricity. The study indicates that cathodic AD could cost-effectively enhance methane production rate and degradation of glucose and fermentative liquid. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of indigenous fresh water microalga Scenedesmus obtusus for feed and fuel applications: Effect of carbon dioxide, light and nutrient sources on growth and biochemical characteristics.

PubMed

Sarat Chandra, T; Deepak, R S; Maneesh Kumar, M; Mukherji, S; Chauhan, V S; Sarada, R; Mudliar, S N

2016-05-01

Scenedesmus obtusus, a freshwater microalga, was evaluated for its growth and biochemical characteristics under various culture conditions. S. obtusus was tolerant at all tested CO2 concentrations up to 20%. Among the different nitrogen sources, urea showed enhanced biomass productivities up to 2-fold compared to control, where the nitrogen source was sodium nitrate. Light intensity and photoperiod had a significant effect on growth rate and biomass productivity. The growth rate was observed maximum under continuous light exposure at the light intensities, 30μmolm(-2)sec(-1) and 60μmolm(-2)sec(-1) The species was able to tolerate the salinity levels up to 25mM NaCl, where, the increase in the concentration of NaCl suppressed the growth. Ammonium acetate and glycine showed better growth rate and biomass productivity indicating mixotrophic ability of S. obtusus. Supplementation of acetate and bicarbonate significantly enhanced the biomass productivity. Biodiesel properties of S. obtusus cultivated at various culture conditions were estimated. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mexico City's active photochemistry: conclusions from the MCMA-2003 study

NASA Astrophysics Data System (ADS)

Brune, W.; Shirley, T.; Lesher, R.; Mao, J.; Volkamer, R.; Molina, L.; Molina, M.; Velasco, E.; Westberg, H.; Lamb, B.; Jobson, T.; Alexander, M.; Gonzalez, B. C.

2004-12-01

Mexico City Metropolitan Area's active photochemistry was studied using an extensive suite of measurements on the CENICA environmental laboratory's roof, as part of the MCMA-2003 field study. Intense morning sunlight photolyzed HONO and HCHO, producing hydrogen oxides (OH and HO2) at high rates. The HOx interacted with rush-hour volatile organic compounds (VOCs) and nitrogen oxides (NOx), amplifying the production rate of ozone and nitric acid. With typically 100 ppbv of NOx and 1 ppmC of VOCs, ozone production rates exceeded 30 ppbv/hour, routinely creating in excess of 150 ppbv of ozone, even though the midday mixed layer was more than 3 km deep. Analyses of glyoxal, a product of VOC oxidation, and the hydroperoxyl radical (HO2) indicate that MCMA's ozone production was VOC-limited during morning rush hour, when typically 1/2 of the ozone is produced, and for a significant number of days during midday and afternoon at the site. Aspects of Mexico City's active photochemistry will be compared to the observed photochemistry in U.S. urban areas.

Chemostat studies of bacteriophage M13 infected Escherichia coli JM109 for continuous ssDNA production.

PubMed

Kick, Benjamin; Behler, Karl Lorenz; Severin, Timm Steffen; Weuster-Botz, Dirk

2017-09-20

Steady state studies in a chemostat enable the control of microbial growth rate at defined reaction conditions. The effects of bacteriophage M13 infection on maximum growth rate of Escherichia coli JM109 were studied in parallel operated chemostats on a milliliter-scale to analyze the steady state kinetics of phage production. The bacteriophage infection led to a decrease in maximum specific growth rate of 15% from 0.74h -1 to 0.63h -1 . Under steady state conditions, a constant cell specific ssDNA formation rate of 0.15±0.004 mg ssDNA g CDW -1 h -1 was observed, which was independent of the growth rate. Using the estimated kinetic parameters for E. coli infected with bacteriophage M13, the ssDNA concentration in the steady state could be predicted as function of the dilution rate and the glucose concentration in the substrate. Scalability of milliliter-scale data was approved by steady state studies on a liter-scale at a selected dilution rate. An ssDNA space-time yield of 5.7mgL -1 h -1 was achieved with increased glucose concentration in the feed at a dilution rate of 0.3h -1 , which is comparable to established fed-batch fermentation with bacteriophage M13 for ssDNA production. Copyright © 2017 Elsevier B.V. All rights reserved.

Movies with smoking make less money.

PubMed

Glantz, Stanton A; Polansky, Jonathan R

2012-11-01

To determine the relationship between presence of smoking in films and total box office receipts. Regression analysis of box office receipts as a function of film rating, production budget, year of release and presence of smoking for 1232 films released in the USA between 2002 and 2010. R-rated films made, on average, 87% (95% CI 83% to 90%) of what PG-13 films of similar smoking status made and smoking films made 87% (95% CI 79% to 96%) of what comparably rated smoke-free films made. Larger budget films made more money. There was no significant effect of release year or G/PG rating compared with PG-13-rated movies. Because PG-13 films without smoking (median $48.6 million) already make 41% more money at the box office than R-rated movies with smoking (median $34.4 million), implementing an R rating for smoking to remove it from youth-rated films will not conflict with the economic self-interest of producer-distributors.

Efficient production of acetone-butanol-ethanol (ABE) from cassava by a fermentation-pervaporation coupled process.

PubMed

Li, Jing; Chen, Xiangrong; Qi, Benkun; Luo, Jianquan; Zhang, Yuming; Su, Yi; Wan, Yinhua

2014-10-01

Production of acetone-butanol-ethanol (ABE) from cassava was investigated with a fermentation-pervaporation (PV) coupled process. ABE products were in situ removed from fermentation broth to alleviate the toxicity of solvent to the Clostridium acetobutylicum DP217. Compared to the batch fermentation without PV, glucose consumption rate and solvent productivity increased by 15% and 21%, respectively, in batch fermentation-PV coupled process, while in continuous fermentation-PV coupled process running for 304 h, the substrate consumption rate, solvent productivity and yield increased by 58%, 81% and 15%, reaching 2.02 g/Lh, 0.76 g/Lh and 0.38 g/g, respectively. Silicalite-1 filled polydimethylsiloxane (PDMS)/polyacrylonitrile (PAN) membrane modules ensured media recycle without significant fouling, steadily generating a highly concentrated ABE solution containing 201.8 g/L ABE with 122.4 g/L butanol. After phase separation, a final product containing 574.3g/L ABE with 501.1g/L butanol was obtained. Therefore, the fermentation-PV coupled process has the potential to decrease the cost in ABE production. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rhagoletis cerasi: Oviposition Reduction Effects of Oil Products

PubMed Central

Daniel, Claudia

2014-01-01

The European cherry fruit fly, Rhagoletis cerasi (L.) (Diptera: Tephritidae), is a highly destructive pest. Methods to control it are limited and alternatives are needed. Observations of cherry fruit flies suggest that females exert much effort to penetrate cherries at color change stage (from green to yellow) for oviposition. Therefore, the question arose as to whether a physical barrier on the fruit surface could reduce oviposition. The effects of different commercial horticultural oil products on R. cerasi oviposition were evaluated in a series of laboratory, semi-field and field experiments. In the laboratory experiments, the rate of successful oviposition on fruits treated with 0.25% v/v of the rapeseed oil product Telmion was significantly reduced by 90% compared to the untreated control. In semi-field experiments, deposits of 1% of rapeseed, mineral and paraffinic oil significantly reduced oviposition for up to 3 days. Semi-field experiments indicated that the oil products lose efficacy within 3 to 6 days after application due to degradation. Although treatments with the rapeseed oil product Telmion reduced infestation rates in an on-farm field experiment, the infested fruit clearly exceeded the level of market tolerance of 2%. Further research is needed to assess whether combinations of oil products, higher application rates and different formulations might improve field efficacy. PMID:26462686

Rhagoletis cerasi: Oviposition Reduction Effects of Oil Products.

PubMed

Daniel, Claudia

2014-04-16

The European cherry fruit fly, Rhagoletis cerasi (L.) (Diptera: Tephritidae), is a highly destructive pest. Methods to control it are limited and alternatives are needed. Observations of cherry fruit flies suggest that females exert much effort to penetrate cherries at color change stage (from green to yellow) for oviposition. Therefore, the question arose as to whether a physical barrier on the fruit surface could reduce oviposition. The effects of different commercial horticultural oil products on R. cerasi oviposition were evaluated in a series of laboratory, semi-field and field experiments. In the laboratory experiments, the rate of successful oviposition on fruits treated with 0.25% v/v of the rapeseed oil product Telmion was significantly reduced by 90% compared to the untreated control. In semi-field experiments, deposits of 1% of rapeseed, mineral and paraffinic oil significantly reduced oviposition for up to 3 days. Semi-field experiments indicated that the oil products lose efficacy within 3 to 6 days after application due to degradation. Although treatments with the rapeseed oil product Telmion reduced infestation rates in an on-farm field experiment, the infested fruit clearly exceeded the level of market tolerance of 2%. Further research is needed to assess whether combinations of oil products, higher application rates and different formulations might improve field efficacy.

Light dose versus rate of delivery: implications for macroalgal productivity.

PubMed

Desmond, Matthew J; Pritchard, Daniel W; Hepburn, Christopher D

2017-06-01

The role of how light is delivered over time is an area of macroalgal photosynthesis that has been overlooked but may play a significant role in controlling rates of productivity and the structure and persistence of communities. Here we present data that quantify the relative influence of total quantum dose and delivery rate on the photosynthetic productivity of five ecologically important Phaeophyceae species from southern New Zealand. Results suggested that greater net oxygen production occurs when light is delivered at a lower photon flux density (PFD) over a longer period compared to a greater PFD over a shorter period, given the same total dose. This was due to greater efficiency (α) at a lower PFD which, for some species, meant a compensatory effect can occur. This resulted in equal or greater productivity even when the total quantum dose of the lower PFD was significantly reduced. It was also shown that light limitation at Huriawa Peninsula, where macroaglae were sourced, may be restricting the acclimation potential of species at greater depths, and that even at shallow depth periods of significant light limitation are likely to occur. This research is of particular interest as the variability of light delivery to coastal reef systems increases as a result of anthropogenic disturbances, and as the value of in situ community primary productivity estimates is recognised.

Liquid and Solid Meal Replacement Products Differentially Affect Postprandial Appetite and Food Intake in Older Adults

PubMed Central

Stull, April J.; Apolzan, John W.; Thalacker-Mercer, Anna E.; Iglay, Heidi B.; Campbell, Wayne W.

2008-01-01

Liquid and solid foods are documented to elicit differential appetitive and food intake responses. This study was designed to assess the influences of liquid vs solid meal replacement products on postprandial appetite ratings and subsequent food intake in healthy older adults. This study used a randomized and crossover design with two 1-day trials (1 week between trials), and 24 adults (12 men and 12 women) aged 50 to 80 years with body mass index (calculated as kg/m2) between 22 and 30 participated. After an overnight fast, the subjects consumed meal replacement products as either a beverage (liquid) or a bar (solid). The meal replacement products provided 25% of each subject's daily estimated energy needs with comparable macro-nutrient compositions. Subjects rated their appetite on a 100 mm quasilogarithmic visual analog scale before and 15, 30, 45, 60, 90, 120, and 150 minutes after consuming the meal replacement product. At minute 120, each subject consumed cooked oatmeal ad libitum to a “comfortable level of fullness.” Postprandial composite (area under the curve from minute 15 to minute 120) hunger was higher (P=0.04) for the liquid vs solid meal replacement products and desire to eat (P=0.15), preoccupation with thoughts of food (P=0.07), and fullness (P=0.25) did not differ for the liquid vs solid meal replacement products. On average, the subjects consumed 13.4% more oatmeal after the liquid vs solid (P=0.006) meal replacement product. These results indicate that meal replacement products in liquid and solid form do not elicit comparable appetitive and ingestive behavior responses and that meal replacement products in liquid form blunt the postprandial decline in hunger and increase subsequent food intake in older adults. PMID:18589034

Mass-Specific Metabolic Rate Influences Sperm Performance through Energy Production in Mammals

PubMed Central

Tourmente, Maximiliano; Roldan, Eduardo R. S.

2015-01-01

Mass-specific metabolic rate, the rate at which organisms consume energy per gram of body weight, is negatively associated with body size in metazoans. As a consequence, small species have higher cellular metabolic rates and are able to process resources at a faster rate than large species. Since mass-specific metabolic rate has been shown to constrain evolution of sperm traits, and most of the metabolic activity of sperm cells relates to ATP production for sperm motility, we hypothesized that mass-specific metabolic rate could influence sperm energetic metabolism at the cellular level if sperm cells maintain the metabolic rate of organisms that generate them. We compared data on sperm straight-line velocity, mass-specific metabolic rate, and sperm ATP content from 40 mammalian species and found that the mass-specific metabolic rate positively influences sperm swimming velocity by (a) an indirect effect of sperm as the result of an increased sperm length, and (b) a direct effect independent of sperm length. In addition, our analyses show that species with higher mass-specific metabolic rate have higher ATP content per sperm and higher concentration of ATP per μm of sperm length, which are positively associated with sperm velocity. In conclusion, our results suggest that species with high mass-specific metabolic rate have been able to evolve both long and fast sperm. Moreover, independently of its effect on the production of larger sperm, the mass-specific metabolic rate is able to influence sperm velocity by increasing sperm ATP content in mammals. PMID:26371474

Cost Minimization for Joint Energy Management and Production Scheduling Using Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Shah, Rahul H.

Production costs account for the largest share of the overall cost of manufacturing facilities. With the U.S. industrial sector becoming more and more competitive, manufacturers are looking for more cost and resource efficient working practices. Operations management and production planning have shown their capability to dramatically reduce manufacturing costs and increase system robustness. When implementing operations related decision making and planning, two fields that have shown to be most effective are maintenance and energy. Unfortunately, the current research that integrates both is limited. Additionally, these studies fail to consider parameter domains and optimization on joint energy and maintenance driven production planning. Accordingly, production planning methodology that considers maintenance and energy is investigated. Two models are presented to achieve well-rounded operating strategy. The first is a joint energy and maintenance production scheduling model. The second is a cost per part model considering maintenance, energy, and production. The proposed methodology will involve a Time-of-Use electricity demand response program, buffer and holding capacity, station reliability, production rate, station rated power, and more. In practice, the scheduling problem can be used to determine a joint energy, maintenance, and production schedule. Meanwhile, the cost per part model can be used to: (1) test the sensitivity of the obtained optimal production schedule and its corresponding savings by varying key production system parameters; and (2) to determine optimal system parameter combinations when using the joint energy, maintenance, and production planning model. Additionally, a factor analysis on the system parameters is conducted and the corresponding performance of the production schedule under variable parameter conditions, is evaluated. Also, parameter optimization guidelines that incorporate maintenance and energy parameter decision making in the production planning framework are discussed. A modified Particle Swarm Optimization solution technique is adopted to solve the proposed scheduling problem. The algorithm is described in detail and compared to Genetic Algorithm. Case studies are presented to illustrate the benefits of using the proposed model and the effectiveness of the Particle Swarm Optimization approach. Numerical Experiments are implemented and analyzed to test the effectiveness of the proposed model. The proposed scheduling strategy can achieve savings of around 19 to 27 % in cost per part when compared to the baseline scheduling scenarios. By optimizing key production system parameters from the cost per part model, the baseline scenarios can obtain around 20 to 35 % in savings for the cost per part. These savings further increase by 42 to 55 % when system parameter optimization is integrated with the proposed scheduling problem. Using this method, the most influential parameters on the cost per part are the rated power from production, the production rate, and the initial machine reliabilities. The modified Particle Swarm Optimization algorithm adopted allows greater diversity and exploration compared to Genetic Algorithm for the proposed joint model which results in it being more computationally efficient in determining the optimal scheduling. While Genetic Algorithm could achieve a solution quality of 2,279.63 at an expense of 2,300 seconds in computational effort. In comparison, the proposed Particle Swarm Optimization algorithm achieved a solution quality of 2,167.26 in less than half the computation effort which is required by Genetic Algorithm.

Phytoplankton Productivity in an Arctic Fjord (West Greenland): Estimating Electron Requirements for Carbon Fixation and Oxygen Production

PubMed Central

Hancke, Kasper; Dalsgaard, Tage; Sejr, Mikael Kristian; Markager, Stiig; Glud, Ronnie Nøhr

2015-01-01

Accurate quantification of pelagic primary production is essential for quantifying the marine carbon turnover and the energy supply to the food web. Knowing the electron requirement (Κ) for carbon (C) fixation (Κ C) and oxygen (O2) production (Κ O2), variable fluorescence has the potential to quantify primary production in microalgae, and hereby increasing spatial and temporal resolution of measurements compared to traditional methods. Here we quantify Κ C and Κ O2 through measures of Pulse Amplitude Modulated (PAM) fluorometry, C fixation and O2 production in an Arctic fjord (Godthåbsfjorden, W Greenland). Through short- (2h) and long-term (24h) experiments, rates of electron transfer (ETRPSII), C fixation and/or O2 production were quantified and compared. Absolute rates of ETR were derived by accounting for Photosystem II light absorption and spectral light composition. Two-hour incubations revealed a linear relationship between ETRPSII and gross 14C fixation (R2 = 0.81) during light-limited photosynthesis, giving a Κ C of 7.6 ± 0.6 (mean ± S.E.) mol é (mol C)−1. Diel net rates also demonstrated a linear relationship between ETRPSII and C fixation giving a Κ C of 11.2 ± 1.3 mol é (mol C)−1 (R2 = 0.86). For net O2 production the electron requirement was lower than for net C fixation giving 6.5 ± 0.9 mol é (mol O2)−1 (R2 = 0.94). This, however, still is an electron requirement 1.6 times higher than the theoretical minimum for O2 production [i.e. 4 mol é (mol O2)−1]. The discrepancy is explained by respiratory activity and non-photochemical electron requirements and the variability is discussed. In conclusion, the bio-optical method and derived electron requirement support conversion of ETR to units of C or O2, paving the road for improved spatial and temporal resolution of primary production estimates. PMID:26218096

Study of the dependence of direct soft photon production on the jet characteristics in hadronic Z 0 decays

NASA Astrophysics Data System (ADS)

Abdallah, J.; Abreu, P.; Adam, W.; Adzic, P.; Albrecht, T.; Alemany-Fernandez, R.; Allmendinger, T.; Allport, P. P.; Amaldi, U.; Amapane, N.; Amato, S.; Anashkin, E.; Andreazza, A.; Andringa, S.; Anjos, N.; Antilogus, P.; Apel, W.-D.; Arnoud, Y.; Ask, S.; Asman, B.; Augustin, J. E.; Augustinus, A.; Baillon, P.; Ballestrero, A.; Bambade, P.; Barbier, R.; Bardin, D.; Barker, G. J.; Baroncelli, A.; Battaglia, M.; Baubillier, M.; Becks, K.-H.; Begalli, M.; Behrmann, A.; Ben-Haim, E.; Benekos, N.; Benvenuti, A.; Berat, C.; Berggren, M.; Bertrand, D.; Besancon, M.; Besson, N.; Bloch, D.; Blom, M.; Bluj, M.; Bonesini, M.; Boonekamp, M.; Booth, P. S. L.; Borisov, G.; Botner, O.; Bouquet, B.; Bowcock, T. J. V.; Boyko, I.; Bracko, M.; Brenner, R.; Brodet, E.; Bruckman, P.; Brunet, J. M.; Buschbeck, B.; Buschmann, P.; Calvi, M.; Camporesi, T.; Canale, V.; Carena, F.; Castro, N.; Cavallo, F.; Chapkin, M.; Charpentier, Ph.; Checchia, P.; Chierici, R.; Chliapnikov, P.; Chudoba, J.; Chung, S. U.; Cieslik, K.; Collins, P.; Contri, R.; Cosme, G.; Cossutti, F.; Costa, M. J.; Crennell, D.; Cuevas, J.; D'Hondt, J.; da Silva, T.; da Silva, W.; Della Ricca, G.; de Angelis, A.; de Boer, W.; de Clercq, C.; de Lotto, B.; de Maria, N.; de Min, A.; de Paula, L.; di Ciaccio, L.; di Simone, A.; Doroba, K.; Drees, J.; Eigen, G.; Ekelof, T.; Ellert, M.; Elsing, M.; Espirito Santo, M. C.; Fanourakis, G.; Fassouliotis, D.; Feindt, M.; Fernandez, J.; Ferrer, A.; Ferro, F.; Flagmeyer, U.; Foeth, H.; Fokitis, E.; Fulda-Quenzer, F.; Fuster, J.; Gandelman, M.; Garcia, C.; Gavillet, Ph.; Gazis, E.; Gokieli, R.; Golob, B.; Gomez-Ceballos, G.; Goncalves, P.; Graziani, E.; Grosdidier, G.; Grzelak, K.; Guy, J.; Haag, C.; Hallgren, A.; Hamacher, K.; Hamilton, K.; Haug, S.; Hauler, F.; Hedberg, V.; Hennecke, M.; Hoffman, J.; Holmgren, S.-O.; Holt, P. J.; Houlden, M. A.; Jackson, J. N.; Jarlskog, G.; Jarry, P.; Jeans, D.; Johansson, E. K.; Jonsson, P.; Joram, C.; Jungermann, L.; Kapusta, F.; Katsanevas, S.; Katsoufis, E.; Kernel, G.; Kersevan, B. P.; Kerzel, U.; King, B. T.; Kjaer, N. J.; Kluit, P.; Kokkinias, P.; Kourkoumelis, C.; Kouznetsov, O.; Krumstein, Z.; Kucharczyk, M.; Lamsa, J.; Leder, G.; Ledroit, F.; Leinonen, L.; Leitner, R.; Lemonne, J.; Lepeltier, V.; Lesiak, T.; Liebig, W.; Liko, D.; Lipniacka, A.; Lopes, J. H.; Lopez, J. M.; Loukas, D.; Lutz, P.; Lyons, L.; MacNaughton, J.; Malek, A.; Maltezos, S.; Mandl, F.; Marco, J.; Marco, R.; Marechal, B.; Margoni, M.; Marin, J.-C.; Mariotti, C.; Markou, A.; Martinez-Rivero, C.; Masik, J.; Mastroyiannopoulos, N.; Matorras, F.; Matteuzzi, C.; Mazzucato, F.; Mazzucato, M.; Mc Nulty, R.; Meroni, C.; Migliore, E.; Mitaroff, W.; Mjoernmark, U.; Moa, T.; Moch, M.; Moenig, K.; Monge, R.; Montenegro, J.; Moraes, D.; Moreno, S.; Morettini, P.; Mueller, U.; Muenich, K.; Mulders, M.; Mundim, L.; Murray, W.; Muryn, B.; Myatt, G.; Myklebust, T.; Nassiakou, M.; Navarria, F.; Nawrocki, K.; Nemecek, S.; Nicolaidou, R.; Nikolenko, M.; Oblakowska-Mucha, A.; Obraztsov, V.; Olshevski, A.; Onofre, A.; Orava, R.; Osterberg, K.; Ouraou, A.; Oyanguren, A.; Paganoni, M.; Paiano, S.; Palacios, J. P.; Palka, H.; Papadopoulou, Th. D.; Pape, L.; Parkes, C.; Parodi, F.; Parzefall, U.; Passeri, A.; Passon, O.; Peralta, L.; Perepelitsa, V.; Perrotta, A.; Petrolini, A.; Piedra, J.; Pieri, L.; Pierre, F.; Pimenta, M.; Piotto, E.; Podobnik, T.; Poireau, V.; Pol, M. E.; Polok, G.; Pozdniakov, V.; Pukhaeva, N.; Pullia, A.; Radojicic, D.; Rebecchi, P.; Rehn, J.; Reid, D.; Reinhardt, R.; Renton, P.; Richard, F.; Ridky, J.; Rivero, M.; Rodriguez, D.; Romero, A.; Ronchese, P.; Roudeau, P.; Rovelli, T.; Ruhlmann-Kleider, V.; Ryabtchikov, D.; Sadovsky, A.; Salmi, L.; Salt, J.; Sander, C.; Savoy-Navarro, A.; Schwickerath, U.; Sekulin, R.; Siebel, M.; Sisakian, A.; Smadja, G.; Smirnova, O.; Sokolov, A.; Sopczak, A.; Sosnowski, R.; Spassov, T.; Stanitzki, M.; Stocchi, A.; Strauss, J.; Stugu, B.; Szczekowski, M.; Szeptycka, M.; Szumlak, T.; Tabarelli, T.; Tegenfeldt, F.; Timmermans, J.; Tkatchev, L.; Tobin, M.; Todorovova, S.; Tome, B.; Tonazzo, A.; Tortosa, P.; Travnicek, P.; Treille, D.; Tristram, G.; Trochimczuk, M.; Troncon, C.; Turluer, M.-L.; Tyapkin, I. A.; Tyapkin, P.; Tzamarias, S.; Uvarov, V.; Valenti, G.; van Dam, P.; van Eldik, J.; van Remortel, N.; van Vulpen, I.; Vegni, G.; Veloso, F.; Venus, W.; Verdier, P.; Verzi, V.; Vilanova, D.; Vitale, L.; Vrba, V.; Wahlen, H.; Washbrook, A. J.; Weiser, C.; Wicke, D.; Wickens, J.; Wilkinson, G.; Winter, M.; Witek, M.; Yushchenko, O.; Zalewska, A.; Zalewski, P.; Zavrtanik, D.; Zhuravlov, V.; Zimin, N. I.; Zintchenko, A.; Zupan, M.; DELPHI Collaboration

2010-06-01

An analysis of the direct soft photon production rate as a function of the parent jet characteristics is presented, based on hadronic events collected by the DELPHI experiment at LEP1. The dependences of the photon rates on the jet kinematic characteristics (momentum, mass, etc.) and on the jet charged, neutral and total hadron multiplicities are reported. Up to a scale factor of about four, which characterizes the overall value of the soft photon excess, a similarity of the observed soft photon behavior to that of the inner hadronic bremsstrahlung predictions is found for the momentum, mass, and jet charged multiplicity dependences. However for the dependence of the soft photon rate on the jet neutral and total hadron multiplicities a prominent difference is found for the observed soft photon signal as compared to the expected bremsstrahlung from final state hadrons. The observed linear increase of the soft photon production rate with the jet total hadron multiplicity and its strong dependence on the jet neutral multiplicity suggest that the rate is proportional to the number of quark pairs produced in the fragmentation process, with the neutral pairs being more effectively radiating than the charged ones.

Design requirements for SRB production control system. Volume 3: Package evaluation, modification and hardware

NASA Technical Reports Server (NTRS)

1981-01-01

The software package evaluation was designed to analyze commercially available, field-proven, production control or manufacturing resource planning management technology and software package. The analysis was conducted by comparing SRB production control software requirements and conceptual system design to software package capabilities. The methodology of evaluation and the findings at each stage of evaluation are described. Topics covered include: vendor listing; request for information (RFI) document; RFI response rate and quality; RFI evaluation process; and capabilities versus requirements.

Comments on the diphoton excess: Critical reappraisal of effective field theory interpretations

DOE PAGES

Kamenik, Jernej F.; Safdi, Benjamin R.; Soreq, Yotam; ...

2016-07-08

We consider the diphoton excess observed by ATLAS and CMS using the most up-to-date data and estimate the preferred enhancement in the production rate between 8 TeV and 13 TeV. Within the framework of effective field theory (EFT), we then show that for both spin-0 and spin-2 Standard Model (SM) gauge-singlet resonances, two of the three processes S → ZZ, S → Z γ, and S → W W must occur with a non-zero rate. Moreover, we demonstrate that these branching ratios are highly correlated in the EFT. Couplings of S to additional SM states may be constrained and differentiated by comparing the S production rates with and without the vector-boson fusion (VBF) cuts. We find that for a given VBF to inclusive production ratio there is maximum rate of S to gauge bosons, bmore » $$\\bar{b}$$, and lighter quark anti-quark pairs. Furthermore, simultaneous measurements of the width and the VBF ratio may be able to point towards the existence of hidden decays.« less

Techno-Economic Analysis of Magnesium Extraction from Seawater via a Catalyzed Organo-Metathetical Process

NASA Astrophysics Data System (ADS)

Liu, Jian; Bearden, Mark D.; Fernandez, Carlos A.; Fifield, Leonard S.; Nune, Satish K.; Motkuri, Radha K.; Koech, Philip K.; McGrail, B. Pete

2018-03-01

Magnesium (Mg) has many useful applications especially in the form of various Mg alloys that can decrease weight while increasing strength compared with common steels. To increase the affordability and minimize environment consequence, a novel catalyzed organo-metathetical (COMET) process was proposed to extract Mg from seawater aiming to achieve a significant reduction in total energy and production cost compared with the melting salt electrolysis method currently adapted by US Mg LLC. A process flow sheet for a reference COMET process was set up using Aspen Plus. The energy consumption, production cost, and CO2 emissions were estimated using the Aspen economic analyzer. Our results showed that it is possible to produce Mg from seawater with a production cost of 2.0/kg-Mg while consuming about 35.6 kWh/kg-Mg and releasing 7.7 kg CO2/kg-Mg. Under the simulated conditions, the reference COMET process maintains a comparable CO2 emission rate, saves about 40% in production cost, and saves about 15% in energy consumption compared with a simplified US Mg process.

Lack of bedrock grain size influence on the soil production rate

NASA Astrophysics Data System (ADS)

Gontier, Adrien; Rihs, Sophie; Chabaux, Francois; Lemarchand, Damien; Pelt, Eric; Turpault, Marie-Pierre

2015-10-01

Our study deals with the part played by bedrock grain size on soil formation rates. U- and Th-series disequilibria were measured in two soil profiles developed from two different facies of the same bedrock, i.e., fine and coarse grain size granites, in the geomorphically flat landscape of the experimental Breuil-Chenue forest site, Morvan, France. The U- and Th-series disequilibria of soil layers and the inferred soil formation rate (1-2 mm ky-1) are nearly identical along the two profiles despite differences in bedrock grain size, variable weathering states and a significant redistribution of U and Th from the uppermost soil layers. This indicates that the soil production rate is more affected by regional geomorphology than by the underlying bedrock texture. Such a production rate inferred from residual soil minerals integrated over the age of the soil is consistent with the flat and slowly eroding geomorphic landscape of the study site. It also compares well to the rate inferred from dissolved solutes integrated over the shorter time scale of solute transport from granitic and basaltic watersheds under similar climates. However, it is significantly lower than the denudation or soil formation rates previously reported from either cosmogenic isotope or U-series measurements from similar climates and lithologies. Our results highlight the particularly low soil production rates of flat terrains in temperate climates. Moreover, they provide evidence that the reactions of mineral weathering actually take place in horizons deeper than 1 m, while a chemical steady state of both concentrations and U-series disequilibria is established in the upper most soil layers, i.e., above ∼70 cm depth. In such cases, the use of soil surface horizons for determining weathering rates is precluded and illustrates the need to focus instead on the deepest soil horizons.

Measurement of Charged Current Coherent Pion Production by Neutrinos on Carbon at MINER$$\

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mislivec, Aaron Robert

Neutrino-nucleus coherent pion production is a rare neutrino scattering process where the squared four-momentum transferred to the nucleus is small, a lepton and pion are produced in the forward direction, and the nucleus remains in its initial state. This process is an important background in neutrino oscillation experiments. Measurements of coherent pion production are needed to constrain models which are used to predict coherent pion production in oscillation experiments. This thesis reports measurements of νµ and νµ charged current coherent pion production on carbon for neutrino energies in the range 2 < Eν < 20 GeV. The measurements were mademore » using data from MINERνA, which is a dedicated neutrino-nucleus scattering experiment that uses a fi scintillator tracking detector in the high-intensity NuMI neutrino beam at Fermilab. Coherent interactions were isolated from the data using only model-independent signatures of the reaction, which are a forward muon and pion, no evidence of nuclear breakup, and small four-momentum transfer to the nucleus. The measurements were compared to the coherent pion production model used by oscillation experiments. The data and model agree in the total interaction rate and are similar in the dependence of the interaction rate on the squared four- momentum transferred from the neutrino. The data and model disagree significantly in the pion kinematics. The measured νµ and νµ interaction rates are consistent, which supports model predictions that the neutrino and antineutrino interaction rates are equal.« less

Lightning on jupiter: rate, energetics, and effects.

PubMed

Lewis, J S

1980-12-19

Voyager data on the optical and radio-frequency detection of lightning discharges in the atmosphere of Jupiter suggest a stroke rate significantly lower than on the earth. The efficiency of conversion of atmospheric convective energy flux into lightning is almost certainly less than on the earth, probably near 10(-7) rather than the terrestrial value of 10(-4). At this level the rate of production of complex organic molecules by lightning and by thunder shock waves is negligible compared to the rates of known photochemical processes for forming colored inorganic solids.

Gradient perception of children's productions of /s/ and /θ/: A comparative study of rating methods.

PubMed

Schellinger, Sarah K; Munson, Benjamin; Edwards, Jan

2017-01-01

Past studies have shown incontrovertible evidence for the existence of covert contrasts in children's speech, i.e. differences between target productions that are nonetheless transcribed with the same phonetic symbol. Moreover, there is evidence that these are relevant to forming prognoses and tracking progress in children with speech sound disorder. A challenge remains to determine the most efficient and reliable methods for assessing covert contrasts. This study investigates how readily listeners can identify covert contrasts in children's speech when using a continuous rating scale in the form of a visual analogue scale (VAS) to denote children's productions. Individual listeners' VAS responses were found to correlate statistically significantly with a variety of continuous measures of children's production accuracy, including judgements of binary accuracy pooled over a large set of listeners. These findings reinforce the growing body of evidence that VAS judgements are potentially useful clinical measures of covert contrast.

Top-down Estimate of Methane Emissions from Natural Gas Production in Northeastern Pennsylvania Using Aircraft and Tower Observations

NASA Astrophysics Data System (ADS)

Barkley, Z.; Lauvaux, T.; Davis, K. J.; Deng, A.; Miles, N. L.; Richardson, S.; Martins, D. K.; Cao, Y.; Sweeney, C.; McKain, K.; Schwietzke, S.; Smith, M. L.; Kort, E. A.

2016-12-01

Leaks in natural gas infrastructure release CH4, a potent greenhouse gas, into the atmosphere. The estimated emission rate associated with the production and transportation of natural gas is uncertain, hindering our understanding of the energy's greenhouse footprint. This study presents two applications of inverse methodology for estimating regional emission rates from natural gas production and gathering facilities in northeastern Pennsylvania. First, we used the WRF-Chem mesoscale model at 3km resolution to simulate CH4 enhancements and compared them to observations obtained from a three-week flight campaign in May 2015 over the Marcellus shale region. Methane emission rates were adjusted to minimize the errors between aircraft observations and the model-simulated concentrations for each flight. Second, we present the first tower-based high resolution atmospheric inversion of CH4 emission rates from unconventional natural gas production activities. A year of continuous CH4 and calibrated δ13C isotope measurements were collected at four tower locations in northeastern Pennsylvania. The adjoint model used here combines a backward-in-time Lagrangian Particle Dispersion Model coupled with the WRF-Chem model at the same resolution. The prior for both optimization systems was compiled for major sources of CH4 within the Mid-Atlantic states, accounting for emissions from natural gas sources as well as emissions related to farming, waste management, coal, and other sources. Optimized natural gas emission rates are found to be 0.36% of total gas production, with a 2σ confidence interval between 0.27-0.45% of production. We present the results from the tower inversion over one year at 3km resolution providing additional information on spatial and temporal variability of emission rates from production and gathering facilities within the natural gas industry in comparison to flux estimates from the aircraft campaign.

Kinetic modeling of lactic acid production from batch submerged fermentation of cheese whey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tango, M.S.A.; Ghaly, A.E.

1999-12-01

A kinetic model for the production of lactic acid through batch submerged fermentation of cheese whey using Lactobacillus helveticus was developed. The model accounts for the effect of substrate limitation, substrate inhibition, lactic acid inhibition, maintenance energy and cell death on the cell growth, substrate utilization, and lactic acid production during the fermentation process. The model was evaluated using experimental data from Tango and Ghaly (1999). The predicted results obtained from the model compared well with experimental (R{sup 2} = 0.92--0.98). The model was also used to investigate the effect of the initial substrate concentration on the lag period, fermentationmore » time, specific growth rate, and cell productivity during batch fermentation. The maximum specific growth rate ({micro}{sub m}), the saturation constant (K{sub S}), the substrate inhibition constant (K{sub IS}), and the lactic acid inhibition constant (K{sub IP}) were found to be 0.25h{sup {minus}1}, 0.9 g/L, 250.0 g/L, and 60.0 g/L, respectively. High initial lactose concentration in cheese whey reduced both the specific growth rate and substrate utilization rate due to the substrate inhibition phenomenon. The maximum lactic acid production occurred at about 100 g/L initial lactose concentration after 40 h of fermentation. The maximum lactic acid concentration above which Lactobacillus helveticus did not grow was found to be 80.0 g/L.« less

Evaluation of a rapid determination of heat production and respiratory quotient in holstein steers using the washed rumen technique

USDA-ARS?s Scientific Manuscript database

The objective of this study was to validate use of the washed rumen technique for rapid measurement of fasting heat production (FHP) and RQ, and to compare this with heart rate (HR) and core temperature (CT). Eight Holstein steers (322 ± 30 kg) were maintained in a controlled temperature (21°C) envi...

Is there a better metric than site index to indicate the productivity of forested lands?

Treesearch

Maria E. Blanco Martin; Michael Hoppus; Andrew Lister; James A. Westfall

2009-01-01

The Forest Service, U.S. Department of Agriculture's Forest Inventory and Analysis (FIA) program selects site trees for each plot that are used to measure site productivity. The ability of a site to produce wood volume is indicated indirectly by comparing total tree height with tree age. This comparison assumes that the rate of height growth is strongly related to...

Effects of 6-mercaptopurine treatment on sperm production and reproductive performance: a study in male mice.

PubMed

Ligumsky, Moshe; Badaan, Shadi; Lewis, Hadassa; Meirow, Dror

2005-04-01

Azathioprine and 6-mercaptopurine interact in purine metabolism and DNA synthesis, thus their potential mutagenic effects have been of concern in the management of inflammatory bowel disease (IBD), especially in patients of childbearing age. Although several clinical studies have indicated their safety in both reproduction and pregnancy, in a recent large epidemiological study concerns were raised about their adverse effects in pregnant patients with IBD, and experimental or basic data on this subject are limited. The aim of this study was to investigate sperm production, sperm quality, and reproductive outcome following prolonged 6-MP administration to male mice. Highly inbred Balb/c adult male mice were used. 6-MP at doses of 2, 5, and 8 mg/kg (n = 9 for each group) was given daily for 51 days and the treatment group was compared with controls. After 45 days of treatment, the mice were mated with females. Following 13 days of pregnancy, the products of conception were evaluated and live fetuses were examined for gross malformations. Sperm production and morphology were examined after 51 days of 6-MP administration. Treatment with 6-MP at all doses did not affect sperm morphology and sperm production in the testicular tubules, as compared with controls (70% normal sperm). However, pregnancy rates were inversely related to escalating doses of 6-MP: 55%, 41%, 28%, and 16% for control, 2, 5, and 8 mg/kg groups, respectively. Resorption rates (abortions) were 21% in the control group as compared with 45-50% in all the treatment groups, but the incidence of major congenital malformations was not increased. Long-term 6-MP treatment in male mice did not impair sperm production and sperm morphology. However, a significantly high rate of embryonic resorption indicated occult sperm damage. Thus, normal sperm analysis does not necessarily imply that sperm damage at genetic level did not occur. It is difficult to extrapolate from these results to the clinical use of 6-MP/azathioprine in IBD patients; however, further basic genetic testing for DNA damage and clinical follow-up are warranted.

The Influence of Sugar Cane Bagasse Type and Its Particle Size on Xylose Production and Xylose-to-Xylitol Bioconversion with the Yeast Debaryomyces hansenii.

PubMed

Aghcheh, Razieh Karimi; Bonakdarpour, Babak; Ashtiani, Farzin Zokaee

2016-11-01

In the present study, the effect of the type of sugar cane bagasse (non-depithed or depithed) and its particle size on the production of xylose and its subsequent fermentation to xylitol by Debaryomyces hansenii CBS767 was investigated using a full factorial experimental design. It was found that the particle size range and whether bagasse was depithed or not had a significant effect on the concentration and yield of xylose in the resulting hemicellulose hydrolysate. Depithed bagasse resulted in higher xylose concentrations compared to non-depithed bagasse. The corresponding detoxified hemicellulose hydrolysates were used as fermentation media for the production of xylitol. The hemicellulose hydrolysate prepared from depithed bagasse also yielded meaningfully higher xylitol fermentation rates compared to non-depithed bagasse. However, in the case of non-depithed bagasse, the hemicellulose hydrolysate prepared from larger particle size range resulted in higher xylitol fermentation rates, whereas the effect in the case of non-depithed bagasse was not pronounced. Therefore, depithing of bagasse is an advantageous pretreatment when it is to be employed in bioconversion processes.

Effect of total solids content on methane and volatile fatty acid production in anaerobic digestion of food waste.

PubMed

Liotta, Flavia; d'Antonio, Giuseppe; Esposito, Giovanni; Fabbricino, Massimiliano; van Hullebusch, Eric D; Lens, Piet N L; Pirozzi, Francesco; Pontoni, Ludovico

2014-10-01

This work investigates the role of the moisture content on anaerobic digestion of food waste, as representative of rapidly biodegradable substrates, analysing the role of volatile fatty acid production on process kinetics. A range of total solids from 4.5% to 19.2% is considered in order to compare methane yields and kinetics of reactors operated under wet to dry conditions. The experimental results show a reduction of the specific final methane yield of 4.3% and 40.8% in semi-dry and dry conditions compared with wet conditions. A decreasing trend of the specific initial methane production rate is observed when increasing the total solids concentration. Because of lack of water, volatile fatty acids accumulation occurs during the first step of the process at semi-dry and dry conditions, which is considered to be responsible for the reduction of process kinetic rates. The total volatile fatty acids concentration and speciation are proposed as indicators of process development at different total solids content. © The Author(s) 2014.

Going Steady: Using multiple isotopes to test the steady-state assumption at the Susquehanna Shale Hills Critical Zone Observatory (Invited)

NASA Astrophysics Data System (ADS)

West, N.; Kirby, E.; Ma, L.; Bierman, P. R.

2013-12-01

Regolith-mantled hillslopes are ubiquitous features of most temperate landscapes, and their morphology reflects the climatically, biologically, and tectonically mediated interplay between regolith production and downslope transport. Despite intensive research, few studies have quantified both of these mass fluxes in the same field site. Here, we exploit two isotopic systems to quantify regolith production and transport within the Susquehanna Shale Hills Critical Zone Observatory (SSHO), in central Pennsylvania. We present an analysis of 131 meteoric 10Be measurements from regolith and bedrock to quantify rates of regolith transport, and compare these data with previously determined regolith production rates, measured using uranium-series isotopes. Regolith flux inferred from meteoric 10Be varies linearly with topographic gradient (determined from high-resolution LiDAR-based topography) along the upper portions of hillslopes in and adjacent to SSHO. However, regolith flux appears to depend on the product of gradient and regolith depth where regolith is thick, near the base of hillslopes. Meteoric 10Be inventories along 4 ridgetops within and adjacent to the SSHO indicate regolith residence times ranging from ~ 9 - 15 ky, similar to residence times inferred from U-series isotopes (6.7 × 3 ky - 15 × 8 ky). Similarly, the downslope flux of regolith (~ 500 - 1,000 m2/My) nearly balances production (850 × 22 m2/My - 960 × 530 m2/My). The combination of our results with U-series derived regolith production rates implies that regolith production and erosion rates along ridgecrests in the SSHO may be approaching steady state conditions over the Holocene.

Accounting for graduate medical education production of primary care physicians and general surgeons: timing of measurement matters.

PubMed

Petterson, Stephen; Burke, Matthew; Phillips, Robert; Teevan, Bridget

2011-05-01

Legislation proposed in 2009 to expand GME set institutional primary care and general surgery production eligibility thresholds at 25% at entry into training. The authors measured institutions' production of primary care physicians and general surgeons on completion of first residency versus two to four years after graduation to inform debate and explore residency expansion and physician workforce implications. Production of primary care physicians and general surgeons was assessed by retrospective analysis of the 2009 American Medical Association Masterfile, which includes physicians' training institution, residency specialty, and year of completion for up to six training experiences. The authors measured production rates for each institution based on physicians completing their first residency during 2005-2007 in family or internal medicine, pediatrics, or general surgery. They then reassessed rates to account for those who completed additional training. They compared these rates with proposed expansion eligibility thresholds and current workforce needs. Of 116,004 physicians completing their first residency, 54,245 (46.8%) were in primary care and general surgery. Of 683 training institutions, 586 met the 25% threshold for expansion eligibility. At two to four years out, only 29,963 physicians (25.8%) remained in primary care or general surgery, and 135 institutions lost eligibility. A 35% threshold eliminated 314 institutions collectively training 93,774 residents (80.8%). Residency expansion thresholds that do not account for production at least two to four years after completion of first residency overestimate eligibility. The overall primary care production rate from GME will not sustain the current physician workforce composition. Copyright © by the Association of American medical Colleges.

Early Improvement in Work Productivity Predicts Future Clinical Course in Depressed Outpatients: Findings from the CO-MED Trial

PubMed Central

Jha, Manish K.; Minhajuddin, Abu; Greer, Tracy L.; Carmody, Thomas; Rush, A. John; Trivedi, Madhukar H.

2018-01-01

Objective Depression symptom severity, the most commonly studied outcome in antidepressant treatment trials, accounts for only a small portion of burden related to major depression. While lost work productivity is the biggest contributor to depression’s economic burden, few studies have systematically evaluated the independent effect of treatment on work productivity and the relationship between changes in work productivity and longer-term clinical course. Method Work productivity was measured repeatedly by the Work Productivity and Activity Impairment (WPAI) self-report in 331 employed participants with major depression enrolled in the Combining Medications to Enhance Depression Outcomes (CO-MED) trial. Trajectories of change in work productivity during the first 6 weeks of treatment were identified and used to predict remission at 3 and 7 months. Results Participants reported reduced absence from work and increased work productivity with antidepressant treatment even after controlling for changes in depression severity. Three distinct trajectories of changes in work productivity were identified: 1) robust early improvement (24%), 2) minimal change (49%), and 3) high-impairment slight reduction (27%). As compared to other participants, those with robust improvement had 3–5 times higher remission rates at 3 months and 2–5 times higher remission rates at 7 months, even after controlling for select baseline variables and remission status at week 6. Conclusions In this secondary analysis, self-reported work productivity improved in depressed patients with antidepressant treatment even after accounting for depressive symptom reduction. Early improvement in work productivity is associated with much higher remission rates after 3 and 7 months of treatment. PMID:27523501

Early Improvement in Work Productivity Predicts Future Clinical Course in Depressed Outpatients: Findings From the CO-MED Trial.

PubMed

Jha, Manish K; Minhajuddin, Abu; Greer, Tracy L; Carmody, Thomas; Rush, A John; Trivedi, Madhukar H

2016-12-01

Depression symptom severity, the most commonly studied outcome in antidepressant treatment trials, accounts for only a small portion of burden related to major depression. While lost work productivity is the biggest contributor to depression's economic burden, few studies have systematically evaluated the independent effect of treatment on work productivity and the relationship between changes in work productivity and longer-term clinical course. Work productivity was measured repeatedly by the Work Productivity and Activity Impairment self-report questionnaire in 331 employed participants with major depression enrolled in the Combining Medications to Enhance Depression Outcomes trial. Trajectories of change in work productivity during the first 6 weeks of treatment were identified and used to predict remission at 3 and 7 months. Participants reported reduced absence from work and increased work productivity with antidepressant treatment even after controlling for changes in depression severity. Three distinct trajectories of changes in work productivity were identified: 1) robust early improvement (24%), 2) minimal change (49%), and 3) high-impairment slight reduction (27%). Compared with other participants, those with robust improvement had 3-5 times higher remission rates at 3 months and 2-5 times higher remission rates at 7 months, even after controlling for select baseline variables and remission status at week 6. In this secondary analysis, self-reported work productivity improved in depressed patients with antidepressant treatment even after accounting for depressive symptom reduction. Early improvement in work productivity is associated with much higher remission rates after 3 and 7 months of treatment.

Concentration of anti-Müllerian hormone in dairy heifers is positively associated with productive herd life.

PubMed

Jimenez-Krassel, F; Scheetz, D M; Neuder, L M; Ireland, J L H; Pursley, J R; Smith, G W; Tempelman, R J; Ferris, T; Roudebush, W E; Mossa, F; Lonergan, P; Evans, A C O; Ireland, J J

2015-05-01

Reliable biomarkers predictive of productive herd life (time in herd after birth of first calf) have heretofore not been discovered in dairy cattle. However, circulating concentrations of anti-Müllerian hormone (AMH) are positively associated with number of follicles or antral follicle count (AFC), ovarian function, and fertility, and approximately 25% of cows have a relatively low AFC and low AMH concentrations. The present study tested the hypothesis that heifers with the lowest AMH concentrations have suboptimal fertility and are removed from a herd for poor reproductive performance at a greater rate, and therefore have a shorter productive herd life compared with age-matched herdmates with higher AMH. To test this hypothesis, 11- to 15-mo-old Holstein heifers (n=281) were subjected to a single measurement of AMH. All heifers not removed from the herd had the opportunity to complete 2 lactations and start their third lactation after calving. During this time, performance and health parameters for each individual were recorded daily by herd managers. Results showed that the quartile of heifers with the lowest AMH concentration also had, on average, a shorter productive herd life (by 196 d), a reduced survival rate after birth of the first calf, the lowest level of milk production (first lactation), the lowest total percentage of cows pregnant (across all lactations), the highest culling rates (first and second lactations and overall), and the highest culling rate for poor reproduction (first lactation) compared with age-matched herdmates with higher AMH. We concluded that a single determination of AMH concentration in young adult dairy heifers may be a simple diagnostic method to predict herd longevity, and AMH may be a useful phenotypic marker to improve longevity of dairy cows. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Assessing conservation tools for an at-risk shorebird: Feasibility of headstarting for American Oystercatchers Haematopus palliatus

USGS Publications Warehouse

Collins, Samantha A.; Sanders, Felicia J.; Jodice, Patrick G.R.

2016-01-01

Management of threatened and endangered populations of wildlife increasingly relies upon active intervention such as predator control, habitat manipulation, and ex situ breeding or care. One tool that has received consideration for the management of declining or threatened avian populations is headstarting, or the artificial incubation of eggs and subsequent placement of newly hatched chicks in original or foster nests. We assessed the feasibility of implementing a headstarting program for the American Oystercatcher Haematopus palliatus, a species of high conservation concern in the eastern USA. Annual productivity is often low and lost during incubation, suggesting artificial incubation could enhance annual productivity. We used a control-impact approach to assign nests as either control or headstart and measured daily survival rate, success of parents accepting headstarted chicks, attendance patterns and behaviours of parents, and chick survival. We also implemented a transparent scoring process to rate the success of each step and the overall program. Daily survival rates of nests were significantly higher at headstart compared to control nests, and parents continued to incubate when eggs were well secured at nest sites. Attendance patterns and behaviour did not differ between headstart and control parents, and parents readily accepted healthy chicks whether they were returned to original or foster nests. Chick survival and subsequently annual productivity were, however, not higher at headstart compared to control nests suggesting that although we were able to enhance nest survival, low chick survival was still limiting annual productivity. Ultimately, headstarting may be most appropriate for American Oystercatchers where productivity is lost primarily to flooding, predation, or disturbance during the incubation stage but not during the chick-rearing stage. If, for example, high rates of nest loss are due to predators that also may prey upon chicks, then headstarting may not be an effective conservation tool.

Methyl mercury dynamics in littoral sediments of a temperate seepage lake

USGS Publications Warehouse

Krabbenhoft, D.P.; Gilmour, C.C.; Benoit, J.M.; Babiarz, Christopher L.; Andren, A.W.; Hurley, J.P.

1998-01-01

The sites and rates of methyl mercury (MeHg) production and transport in littoral zone sediments were investigated at Pallette Lake in northern Wisconsin. In littoral areas where groundwater inflow occurs, sulfate supply from groundwater creates profiles of electron acceptors (sulfate) and donors (methane, sulfide) that are reversed from those found in sediments whose sulfate supply is delivered from overlying water. The highest MeHg concentrations in porewaters and the maximal advective MeHg flux rates (4.5-61.7 ng??m-2??day-1) were observed in the spring, while highest bulk phase concentrations occur later in the summer. These estimated MeHg fluxes are greater than the mean areal production rates estimated previously for the water column and are similar to the atmospheric flux. Gross MeHg production was measured using the addition of 203Hg as a tracer to sediments. The depth at which maximal 203Hg methylation occurred coincided with the observed maximums m solid-phase and porewater MeHg concentrations. Because input, advection, and accumulation of MeHg in these sediments were measured directly, an independent estimate of MeHg production could be made and compared with 203Hg-derived rates. This comparison suggests that the 203Hg tracer method provides reasonable estimates of gross methylation rates and that a substantial fraction of solid-phase Hg is available for methylation.

The Influence of Process Equipment on the Properties of Suspension Plasma Sprayed Yttria-Stabilized Zirconia Coatings

NASA Astrophysics Data System (ADS)

Marr, Michael; Waldbillig, David; Kesler, Olivera

2013-03-01

Suspension plasma-sprayed YSZ coatings were deposited at lab-scale and production-type facilities to investigate the effect of process equipment on coating properties. The target application for these coatings is solid oxide fuel cell (SOFC) electrolytes; hence, dense microstructures with low permeability values were preferred. Both facilities had the same torch but different suspension feeding systems, torch robots, and substrate holders. The lab-scale facility had higher torch-substrate relative speeds compared with the production-type facility. On porous stainless steel substrates, permeabilities and microstructures were comparable for coatings from both facilities, and no segmentation cracks were observed. Coating permeability was further reduced by increasing substrate temperatures during deposition or reducing suspension feed rates. On SOFC cathode substrates, coatings made in the production-type facility had higher permeabilities and more segmentation cracks compared with coatings made in the lab-scale facility. Increased cracking in coatings from the production-type facility was likely caused mainly by its lower torch-substrate relative speed.

Effects of appropriate and inappropriate odors on product evaluations.

PubMed

Schifferstein, Hendrik N J; Miciiaut, Anne M K

2002-12-01

In accounting for an odorant's effect on the evaluation of a product, both the odor's intrinsic pleasantness and its appropriateness for that particular product are relevant. When comparing the effects of pleasant smells, consumers are likely to prefer products with appropriate smells to those with an inappropriate smell. We investigated the effect of adding congruent and incongruent odorants on product evaluations for each of three product categories: food (tea, instant whip, cake mix), personal care (shampoo, deodorant, lip balm), and household products (cream cleaner, air freshener, furniture wax). In a between-subjects design, 96 respondents judged scented and unscented products presented in commercial packages of major national brands. The respondents assessed the overall evaluation, 14 to 19 beliefs about the product, buying intention, and the frequency of use for each product. Respondents were instructed to evaluate each product as they would in a store. Although congruency ratings between odor and product show that the manipulation of congruency was successful, no main effect was found for the congruency on overall evaluations of the products. To account for this unexpected finding, we speculate that congruency between odor and product may be more important during product consumption or product use than during its selection. In addition, the odor's effects may have been attenuated in our experiment because we asked our respondents to rate each product on the attribute 'has a nice smell'.

Identification and thermochemical analysis of high-lignin feedstocks for biofuel and biochemical production

PubMed Central

2011-01-01

Background Lignin is a highly abundant biopolymer synthesized by plants as a complex component of plant secondary cell walls. Efforts to utilize lignin-based bioproducts are needed. Results Herein we identify and characterize the composition and pyrolytic deconstruction characteristics of high-lignin feedstocks. Feedstocks displaying the highest levels of lignin were identified as drupe endocarp biomass arising as agricultural waste from horticultural crops. By performing pyrolysis coupled to gas chromatography-mass spectrometry, we characterized lignin-derived deconstruction products from endocarp biomass and compared these with switchgrass. By comparing individual pyrolytic products, we document higher amounts of acetic acid, 1-hydroxy-2-propanone, acetone and furfural in switchgrass compared to endocarp tissue, which is consistent with high holocellulose relative to lignin. By contrast, greater yields of lignin-based pyrolytic products such as phenol, 2-methoxyphenol, 2-methylphenol, 2-methoxy-4-methylphenol and 4-ethyl-2-methoxyphenol arising from drupe endocarp tissue are documented. Conclusions Differences in product yield, thermal decomposition rates and molecular species distribution among the feedstocks illustrate the potential of high-lignin endocarp feedstocks to generate valuable chemicals by thermochemical deconstruction. PMID:22018114

Measuring Productivity in College-Level Chemistry Education Scholarship

ERIC Educational Resources Information Center

Pienta, Norbert J.

2004-01-01

The American Chemical Society (ACS) Directories of Graduate Research provides useful data for the comparison of publication rates with colleagues in chemistry department. It is essential to compare fairly regarding cases of promotion, tenure and merit raises.

Effects of temperature and glycerol and methanol-feeding profiles on the production of recombinant galactose oxidase in Pichia pastoris

PubMed Central

Anasontzis, George E; Salazar Penã, Margarita; Spadiut, Oliver; Brumer, Harry; Olsson, Lisbeth

2014-01-01

Optimization of protein production from methanol-induced Pichia pastoris cultures is necessary to ensure high productivity rates and high yields of recombinant proteins. We investigated the effects of temperature and different linear or exponential methanol-feeding rates on the production of recombinant Fusarium graminearum galactose oxidase (EC 1.1.3.9) in a P. pastoris Mut+ strain, under regulation of the AOX1 promoter. We found that low exponential methanol feeding led to 1.5-fold higher volumetric productivity compared to high exponential feeding rates. The duration of glycerol feeding did not affect the subsequent product yield, but longer glycerol feeding led to higher initial biomass concentration, which would reduce the oxygen demand and generate less heat during induction. A linear and a low exponential feeding profile led to productivities in the same range, but the latter was characterized by intense fluctuations in the titers of galactose oxidase and total protein. An exponential feeding profile that has been adapted to the apparent biomass concentration results in more stable cultures, but the concentration of recombinant protein is in the same range as when constant methanol feeding is employed. © 2014 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:728–735, 2014 PMID:24493559

Studies on Batch Production of Bacterial Concentrates from Mixed Species Lactic Starters

PubMed Central

Pettersson, H. E.

1975-01-01

Optimum growth conditions for mixed species starter FDs 0172 at constant pH in skim milk, whey, and tryptone medium were investigated. Growth rate and maximum population were optimal at 30 C. pH values between 5.5 and 7.0 did not influence the growth rate and maximum population obtainable. Lactic acid-producing activity declined rapidly after reaching the end of the exponential growth phase. The bacterial balance was found to be influenced by the growth parameters: media, pH, temperature, and neutralizer. Skim milk or whey medium at 25 C, pH 6.5, and neutralized with 20% (vol/vol) NH4OH kept the bacterial balance almost constant throughout the cultivation. Grown in tryptone medium at constant pH, the changes in bacterial balance and other metabolic activities were striking compared to the other two media tested. The effect of lactate as an inhibitor was found to be complex, changing with the growth conditions. Concentrates made from mixed species starters FDs 0172, FD 0570, CH 0170, CHs 0170, and T 27 were comparable to controls when cultivated at the optimum conditions found and thereafter centrifuged. Aroma production, proteolytic activity, and CO2 production did not change significantly compared to controls when cultivated at optimum conditions in skim milk or whey medium. PMID:16350009

Cost minimization analysis of a store-and-forward teledermatology consult system.

PubMed

Pak, Hon S; Datta, Santanu K; Triplett, Crystal A; Lindquist, Jennifer H; Grambow, Steven C; Whited, John D

2009-03-01

The aim of this study was to perform a cost minimization analysis of store-and-forward teledermatology compared to a conventional dermatology referral process (usual care). In a Department of Defense (DoD) setting, subjects were randomized to either a teledermatology consult or usual care. Accrued healthcare utilization recorded over a 4-month period included clinic visits, teledermatology visits, laboratories, preparations, procedures, radiological tests, and medications. Direct medical care costs were estimated by combining utilization data with Medicare reimbursement rates and wholesale drug prices. The indirect cost of productivity loss for seeking treatment was also included in the analysis using an average labor rate. Total and average costs were compared between groups. Teledermatology patients incurred $103,043 in total direct costs ($294 average), while usual-care patients incurred $98,365 ($283 average). However, teledermatology patients only incurred $16,359 ($47 average) in lost productivity cost while usual-care patients incurred $30,768 ($89 average). In total, teledermatology patients incurred $119,402 ($340 average) and usual-care patients incurred $129,133 ($372 average) in costs. From the economic perspective of the DoD, store-and-forward teledermatology was a cost-saving strategy for delivering dermatology care compared to conventional consultation methods when productivity loss cost is taken into consideration.

[Scientific publication output of Spanish emergency physicians from 2005 to 2014: a comparative study].

PubMed

Fernández-Guerrero, Inés María; Martín-Sánchez, Francisco Javier; Burillo-Putze, Guillermo; Miró, Òscar

2017-10-01

To analyze the research output of Spanish emergency physicians between 2005 and 2014 and to compare it to their output in the previous 10-year period (1995-2004) as well as to that of emergency physicians in other countries and Spanish physicians in other specialties. Original articles indexed in the Science Citation Index Expanded of the Web of Science were included. Documents from Spanish emergency physicians were identified by combining the word Spain and any other search term identifying an emergency service or unit in Spain. To identify articles from 7 other Spanish specialties (hematology, endocrinology, cardiology, pneumology, digestive medicine, pediatrics, surgery and orthopedic medicine or traumatology) and emergency physicians in 8 other countries (United States, United Kingdom, Ireland, Italy, France, Germany, Netherlands, Belgium) we used similar strategies. Information about production between 1995 and 2004 was extracted from a prior publication. Spanish emergency physicians signed 1254 articles (mean [SD], 125 [44] articles/y) between 2005 and 2014. That level of productivity was greater than in the 1995-2004 period (mean, 26 [14] articles/y), although the annual growth rate fell from 12.5% in the previous 10-year period to 5.2% in the most recent one. Emergency medicine was among the least productive Spanish specialties we studied, but our discipline's annual growth rate of 5.2% was the highest. Spanish emergency medicine occupies an intermediate position (ranking fifth) among the 9 countries studied, although the population-adjusted rank was higher (fourth). When output was adjusted for gross domestic product, Spain climbed higher in rank, to second position. The annual growth rate was the fourth highest among countries, after Germany (9.9%), the Netherlands (7.3%), and Italy (6.0%). The research output of Spanish emergency physicians continues to be quantitatively lower than that of other Spanish specialties and of emergency physicians in other countries. The annual rate of growth in publications, although good, fell below the growth rate of the previous period.

Dependence on glucose limitation of the pCO2 influences on CHO cell growth, metabolism and IgG production.

PubMed

Takuma, Shinya; Hirashima, Chikashi; Piret, James M

2007-08-15

The culture levels of glucose and CO(2) have been reported to independently have important influences on mammalian cell processes. In this work the combined effects of glucose limitation and CO(2) partial pressure (pCO(2)) on monoclonal antibody (IgG) producing Chinese Hamster Ovary cells were investigated in a perfusion reactor operated with controlled cell specific medium feed rate, pH and osmolality. Under high glucose conditions (14.3 +/- 0.8 mM), the apparent growth rate decreased (from 0.021 to 0.009 h(-1)) as the pCO(2) increased to approximately 220 mmHg, while the cell specific IgG productivity was almost unchanged. The lactate yield from glucose was not affected by pCO(2) up to approximately 220 mmHg and glucose was mainly converted to lactate. A feed medium modification from high (33 mM) to low (6 mM) glucose resulted in <0.1 mM glucose in the culture. As a result of apparently shifting metabolism towards the conversion of pyruvate to CO(2), both the ratio of lactate to glucose and the alanine production rate were lowered (1.51-1.14 and 17.7-0.56 nmol/10(6) cells h, respectively). Interestingly, when the pCO(2) was increased to approximately 140 mmHg, limiting glucose resulted in 1.7-fold higher growth rates, compared to high glucose conditions. However, at approximately 220 mmHg pCO(2) this beneficial effect of glucose limitation on these CHO cells was lost as the growth rate dropped dramatically to 0.008 h(-1) and the IgG productivity was lowered by 15% (P < 0.01) relative to the high glucose condition. The IgG galactosylation increased under glucose- limited compared to high-glucose conditions. (c) 2007 Wiley Periodicals, Inc.

Is the Grass Always Greener? Comparing the Environmental Impact of Conventional, Natural and Grass-Fed Beef Production Systems.

PubMed

Capper, Judith L

2012-04-10

This study compared the environmental impact of conventional, natural and grass-fed beef production systems. A deterministic model based on the metabolism and nutrient requirements of the beef population was used to quantify resource inputs and waste outputs per 1.0 × 10⁸ kg of hot carcass weight beef in conventional (CON), natural (NAT) and grass-fed (GFD) production systems. Production systems were modeled using characteristic management practices, population dynamics and production data from U.S. beef production systems. Increased productivity (slaughter weight and growth rate) in the CON system reduced the cattle population size required to produce 1.0 × 10⁸ kg of beef compared to the NAT or GFD system. The CON system required 56.3% of the animals, 24.8% of the water, 55.3% of the land and 71.4% of the fossil fuel energy required to produce 1.0 × 10⁸ kg of beef compared to the GFD system. The carbon footprint per 1.0 × 10⁸ kg of beef was lowest in the CON system (15,989 × 10³ t), intermediate in the NAT system (18,772 × 10³ t) and highest in the GFD system (26,785 × 10³ t). The challenge to the U.S beef industry is to communicate differences in system environmental impacts to facilitate informed dietary choice.

Optimization of food waste hydrolysis in leach bed coupled with methanogenic reactor: effect of pH and bulking agent.

PubMed

Xu, Su Yun; Lam, Hoi Pui; Karthikeyan, O Parthiba; Wong, Jonathan W C

2011-02-01

The effects of pH and bulking agents on hydrolysis/acidogenesis of food waste were studied using leach bed reactor (LBR) coupled with methanogenic up-flow anaerobic sludge blanket (UASB) reactor. The hydrolysis rate under regulated pH (6.0) was studied and compared with unregulated one during initial experiment. Then, the efficacies of five different bulking agents, i.e. plastic full particles, plastic hollow sphere, bottom ash, wood chip and saw dust were experimented under the regulated pH condition. Leachate recirculation with 50% water replacement was practiced throughout the experiment. Results proved that the daily leachate recirculation with pH control (6.0) accelerated the hydrolysis rate (59% higher volatile fatty acids) and methane production (up to 88%) compared to that of control without pH control. Furthermore, bottom ash improved the reactor alkalinity, which internally buffered the system that improved the methane production rate (0.182 l CH(4)/g VS(added)) than other bulking agents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Promoting employee health by integrating health protection, health promotion, and continuous improvement: a longitudinal quasi-experimental intervention study.

PubMed

von Thiele Schwarz, Ulrica; Augustsson, Hanna; Hasson, Henna; Stenfors-Hayes, Terese

2015-02-01

To test the effects of integrating health protection and health promotion with a continuous improvement system (Kaizen) on proximal employee outcomes (health promotion, integration, and Kaizen) and distal outcomes (workability, productivity, self-rated health and self-rated sickness absence). Twelve units in a county hospital in Sweden were randomized to control or intervention groups using a quasiexperimental study design. All staff (approximately 500) provided self-ratings in questionnaires at baseline, and a 12- and 24-month follow-up (response rate, 79% to 87.5%). There was a significant increase in the proximal outcomes over time in the intervention group compared with the control group, and a trend toward improvement in the distal outcomes workability and productivity. Integration seems to promote staff engagement in health protection and promotion, as well as to improve their understanding of the link between work and health.

A comparison of three pH control methods for revealing effects of undissociated butyric acid on specific butanol production rate in batch fermentation of Clostridium acetobutylicum

PubMed Central

2013-01-01

pH control has been essential for butanol production with Clostridium acetobutylicum. However, it is not very clear at what pH level the acid crash will occur, at what pH level butanol production will be dominant, and at what pH level butyric acid production will be prevailing. Furthermore, contradictory results have been reported about required acidic conditions for initiation of solventogenesis. In this study, with the aim of further understanding the role of undissociated butyric acid in butanol production, we investigated the correlation between undissociated butyric acid concentration and specific butanol production rate in batch fermentation of Clostridium acetobutylicum by comparing three pH control approaches: NaOH neutralization (at 12, 24 or 36 h), CaCO3 supplementation (2, 5, or 8 g/l) and NaOAc buffering (pH 4.6, 5.0 or 5.6). By neutralizing the fermentation pH to ~5.0 at different time, we observed that neutralization should take place at the beginning of exponential phase (12 h), and otherwise resulting in lower concentrations of undissociated butyric acid, cell biomass and final butanol. CaCO3 supplementation extended cell growth to 36 h and resulted in higher butyrate yield under 8 g/L of CaCO3. In the NaOAc buffering, the highest specific butanol rate (0.58 h−1) was associated with the highest undissociated butyric acid (1.92 g/L). The linear correlation of the undissociated butyric acid with the specific butanol production rates suggested the undissociated butyric acid could be the major driving force for butanol production. PMID:23294525

A comparison of three pH control methods for revealing effects of undissociated butyric acid on specific butanol production rate in batch fermentation of Clostridium acetobutylicum.

PubMed

Yang, Xuepeng; Tu, Maobing; Xie, Rui; Adhikari, Sushil; Tong, Zhaohui

2013-01-07

pH control has been essential for butanol production with Clostridium acetobutylicum. However, it is not very clear at what pH level the acid crash will occur, at what pH level butanol production will be dominant, and at what pH level butyric acid production will be prevailing. Furthermore, contradictory results have been reported about required acidic conditions for initiation of solventogenesis. In this study, with the aim of further understanding the role of undissociated butyric acid in butanol production, we investigated the correlation between undissociated butyric acid concentration and specific butanol production rate in batch fermentation of Clostridium acetobutylicum by comparing three pH control approaches: NaOH neutralization (at 12, 24 or 36 h), CaCO3 supplementation (2, 5, or 8 g/l) and NaOAc buffering (pH 4.6, 5.0 or 5.6). By neutralizing the fermentation pH to ~5.0 at different time, we observed that neutralization should take place at the beginning of exponential phase (12 h), and otherwise resulting in lower concentrations of undissociated butyric acid, cell biomass and final butanol. CaCO3 supplementation extended cell growth to 36 h and resulted in higher butyrate yield under 8 g/L of CaCO3. In the NaOAc buffering, the highest specific butanol rate (0.58 h-1) was associated with the highest undissociated butyric acid (1.92 g/L). The linear correlation of the undissociated butyric acid with the specific butanol production rates suggested the undissociated butyric acid could be the major driving force for butanol production.

The health and cost implications of high body mass index in Australian defence force personnel.

PubMed

Peake, Jonathan; Gargett, Susan; Waller, Michael; McLaughlin, Ruth; Cosgrove, Tegan; Wittert, Gary; Nasveld, Peter; Warfe, Peter

2012-06-19

Frequent illness and injury among workers with high body mass index (BMI) can raise the costs of employee healthcare and reduce workforce maintenance and productivity. These issues are particularly important in vocational settings such as the military, which require good physical health, regular attendance and teamwork to operate efficiently. The purpose of this study was to compare the incidence of injury and illness, absenteeism, productivity, healthcare usage and administrative outcomes among Australian Defence Force personnel with varying BMI. Personnel were grouped into cohorts according to the following ranges for (BMI): normal (18.5 - 24.9 kg/m2; n = 197), overweight (25-29.9 kg/m2; n = 154) and obese (≥30 kg/m2) with restricted body fat (≤28% for females, ≤24% for males) (n = 148) and with no restriction on body fat (n = 180). Medical records for each individual were audited retrospectively to record the incidence of injury and illness, absenteeism, productivity, healthcare usage (i.e., consultation with medical specialists, hospital stays, medical investigations, prescriptions) and administrative outcomes (e.g., discharge from service) over one year. These data were then grouped and compared between the cohorts. The prevalence of injury and illness, cost of medical specialist consultations and cost of medical scans were all higher (p < 0.05) in both obese cohorts compared with the normal cohort. The estimated productivity losses from restricted work days were also higher (p < 0.05) in the obese cohort with no restriction on body fat compared with the normal cohort. Within the obese cohort, the prevalence of injury and illness, healthcare usage and productivity were not significantly greater in the obese cohort with no restriction on body fat compared with the cohort with restricted body fat. The number of restricted work days, the rate of re-classification of Medical Employment Classification and the rate of discharge from service were similar between all four cohorts. High BMI in the military increases healthcare usage, but does not disrupt workforce maintenance. The greater prevalence of injury and illness, greater healthcare usage and lower productivity in obese Australian Defence Force personnel is not related to higher levels of body fat.

A comparative study on the metabolism of Epimedium koreanum Nakai-prenylated flavonoids in rats by an intestinal enzyme (lactase phlorizin hydrolase) and intestinal flora.

PubMed

Zhou, Jing; Chen, Yan; Wang, Ying; Gao, Xia; Qu, Ding; Liu, Congyan

2013-12-24

The aim of this study was to compare the significance of the intestinal hydrolysis of prenylated flavonoids in Herba Epimedii by an intestinal enzyme and flora. Flavonoids were incubated at 37 °C with rat intestinal enzyme and intestinal flora. HPLC-UV was used to calculate the metabolic rates of the parent drug in the incubation and LC/MS/MS was used to determine the chemical structures of metabolites generated by different flavonoid glycosides. Rates of flavonoid metabolism by rat intestinal enzyme were quicker than those of intestinal flora. The sequence of intestinal flora metabolic rates was icariin>epimedin B>epimedin A>epimedin C>baohuoside I, whereas the order of intestinal enzyme metabolic rates was icariin>epimedin A>epimedin C>epimedin B>baohuoside I. Meanwhile, the LC/MS/MS graphs showed that icariin produced three products, epimedin A/B/C had four and baohuoside I yielded one product in incubations of both intestinal enzyme and flora, which were more than the results of HPLC-UV due to the fact LC/MS/MS has lower detectability and higher sensitivity. Moreover, the outcomes indicated that the rate of metabolization of flavonoids by intestinal enzyme were faster than those of intestinal flora, which was consistent with the HPLC-UV results. In conclusion, the metabolic pathways of the same components by intestinal flora and enzyme were the same. What's more, an intestinal enzyme such as lactase phlorizin hydrolase exhibited a more significant metabolic role in prenylated flavonoids of Herba Epimedi compared with intestinal flora.

Characteristics of a gelled liquid hyprogen polyphenylene oxide (PPO) foam open-cell insulation system, phase 1

NASA Technical Reports Server (NTRS)

1973-01-01

A large scale gel production and storage facility and a small scale facility, the latter used for detailed visual examination of the gel/PPO foam interface, were developed. A subcontract was given to investigate techniques for the production of gelled liquid hydrogen, develop a process design for scale-up to a 1.89 cu m (500 gallon) gel production and storage facility, determine gel transfer characteristics, determine the solubility rate of gaseous helium in the gel, and investigate the gross gel/PPO foam interfacial phenomena. An inside-tank process for scaled-up production of gelled liquid hydrogen was selected. No detectable gel structure degradation occurred during repeated shearing. The viscosity of gelled liquid hydrogen at shear rates of 300/sec and higher is 2 to 5-fold greater than that of neat liquid hydrogen. No clogging problems were encountered during the transfer of gelled liquid hydrogen through warmed transfer lines. The solubility rate of helium in liquid hydrogen was significantly reduced by the presence of gel structure. The boil-off rates from gelled liquid hydrogen were reduced from 25 to 50 percent compared to those observed for the neat liquid hydrogen under compatible conditions. The polyphenylene oxide (PPO) foam insulation was found to be compatible with liquid ethane.

Forecasting the (un)productivity of the 2014 M 6.0 South Napa aftershock sequence

USGS Publications Warehouse

Llenos, Andrea L.; Michael, Andrew J.

2017-01-01

The 24 August 2014 Mw 6.0 South Napa mainshock produced fewer aftershocks than expected for a California earthquake of its magnitude. In the first 4.5 days, only 59 M≥1.8 aftershocks occurred, the largest of which was an M 3.9 that happened a little over two days after the mainshock. We investigate the aftershock productivity of the South Napa sequence and compare it with other M≥5.5 California strike‐slip mainshock–aftershock sequences. While the productivity of the South Napa sequence is among the lowest, northern California mainshocks generally have fewer aftershocks than mainshocks further south, although the productivities vary widely in both regions. An epidemic‐type aftershock sequence (ETAS) model (Ogata, 1988) fit to Napa seismicity from 1980 to 23 August 2014 fits the sequence well and suggests that low‐productivity sequences are typical of this area. Utilizing regional variations in productivity could improve operational earthquake forecasting (OEF) by improving the model used immediately after the mainshock. We show this by comparing the daily rate of M≥2 aftershocks to forecasts made with the generic California model (Reasenberg and Jones, 1989; hereafter, RJ89), RJ89 models with productivity updated daily, a generic California ETAS model, an ETAS model based on premainshock seismicity, and ETAS models updated daily following the mainshock. RJ89 models for which only the productivity is updated provide better forecasts than the generic RJ89 California model, and the Napa‐specific ETAS models forecast the aftershock rates more accurately than either generic model. Therefore, forecasts that use localized initial parameters and that rapidly update the productivity may be better for OEF than using a generic model and/or updating all parameters.

Opsonophagocytic Antibodies to Serotype Ia, Ib, and III Group B Streptococcus among Korean Infants and in Intravenous Immunoglobulin Products.

PubMed

Kim, Han Wool; Lee, Ji Hyen; Cho, Hye Kyung; Lee, Hyunju; Seo, Ho Seong; Lee, Soyoung; Kim, Kyung Hyo

2017-05-01

Group B streptococcus (GBS) infection is a leading cause of sepsis and meningitis among infants, and is associated with high rates of morbidity and mortality in many countries. Protection against GBS typically involves antibody-mediated opsonization by phagocytes and complement components. The present study evaluated serotype-specific functional antibodies to GBS among Korean infants and in intravenous immunoglobulin (IVIG) products. An opsonophagocytic killing assay (OPA) was used to calculate the opsonization indices (OIs) of functional antibodies to serotypes Ia, Ib, and III in 19 IVIG products from 5 international manufacturers and among 98 Korean infants (age: 0-11 months). The GBS Ia, Ib, and III serotypes were selected because they are included in a trivalent GBS vaccine formulation that is being developed. The OI values for the IVIG products were 635-5,706 (serotype Ia), 488-1,421 (serotype Ib), and 962-3,315 (serotype III), and none of the IVIG lots exhibited undetectable OI values (< 4). The geometric mean OI values were similar for all 3 serotypes when we compared the Korean manufacturers. The seropositive rate among infants was significantly lower for serotype Ia (18.4%), compared to serotype Ib and serotype III (both, 38.8%). Infant age of ≥ 3 months was positively correlated with the seropositive rates for each serotype. Therefore, only a limited proportion of infants exhibited protective immunity against serotype Ia, Ib, and III GBS infections. IVIG products that exhibit high antibody titers may be a useful therapeutic or preventive measure for infants. Further studies are needed to evaluate additional serotypes and age groups. © 2017 The Korean Academy of Medical Sciences.

Opsonophagocytic Antibodies to Serotype Ia, Ib, and III Group B Streptococcus among Korean Infants and in Intravenous Immunoglobulin Products

PubMed Central

2017-01-01

Group B streptococcus (GBS) infection is a leading cause of sepsis and meningitis among infants, and is associated with high rates of morbidity and mortality in many countries. Protection against GBS typically involves antibody-mediated opsonization by phagocytes and complement components. The present study evaluated serotype-specific functional antibodies to GBS among Korean infants and in intravenous immunoglobulin (IVIG) products. An opsonophagocytic killing assay (OPA) was used to calculate the opsonization indices (OIs) of functional antibodies to serotypes Ia, Ib, and III in 19 IVIG products from 5 international manufacturers and among 98 Korean infants (age: 0–11 months). The GBS Ia, Ib, and III serotypes were selected because they are included in a trivalent GBS vaccine formulation that is being developed. The OI values for the IVIG products were 635–5,706 (serotype Ia), 488–1,421 (serotype Ib), and 962–3,315 (serotype III), and none of the IVIG lots exhibited undetectable OI values (< 4). The geometric mean OI values were similar for all 3 serotypes when we compared the Korean manufacturers. The seropositive rate among infants was significantly lower for serotype Ia (18.4%), compared to serotype Ib and serotype III (both, 38.8%). Infant age of ≥ 3 months was positively correlated with the seropositive rates for each serotype. Therefore, only a limited proportion of infants exhibited protective immunity against serotype Ia, Ib, and III GBS infections. IVIG products that exhibit high antibody titers may be a useful therapeutic or preventive measure for infants. Further studies are needed to evaluate additional serotypes and age groups. PMID:28378545

Enhancing the Feasibility of Microcystis aeruginosa as a Feedstock for Bioethanol Production under the Influence of Various Factors

PubMed Central

Lee, Moon Geon; Seo, Hyo Jin; Shin, Jin Hyuk; Shin, Tai Sun; Kim, Min Yong; Choi, Jong Il

2016-01-01

Microcystis aeruginosa, a freshwater microalga, is capable of producing and accumulating different types of sugars in its biomass which make it a good feedstock for bioethanol production. Present study aims to investigate the effect of different factors increasing growth rate and carbohydrates productivity of M. aeruginosa. MF media (modified BG11 media) and additional ingredients such as aminolevulinic acid (2 mM), lysine (2.28 mM), alanine (1 mM), and Naphthalene acetic acid (1 mM) as cytokine promoted M. aeruginosa growth and sugar contents. Salmonella showed growth-assisting effect on M. aeruginosa. Enhanced growth rate and carbohydrates contents were observed in M. aeruginosa culture grown at 25°C under red LED light of 90 μmolm−2s−1 intensity. More greenish and carbohydrates rich M. aeruginosa biomass was prepared (final OD660 nm = 2.21 and sugar contents 10.39 mM/mL) as compared to control (maximum OD660 nm = 1.4 and sugar contents 3 mM/mL). The final algae biomass was converted to algae juice through a specific pretreatment method. The resulted algae Juice was used as a substrate in fermentation process. Highest yield of bioethanol (50 mM/mL) was detected when Brettanomyces custersainus, Saccharomyces cerevisiae, and Pichia stipitis were used in combinations for fermentation process as compared to their individual fermentation. The results indicated the influence of different factors on the growth rate and carbohydrates productivity of M. aeruginosa and its feasibility as a feedstock for fermentative ethanol production. PMID:27556034

Enhancing the Feasibility of Microcystis aeruginosa as a Feedstock for Bioethanol Production under the Influence of Various Factors.

PubMed

Khan, Muhammad Imran; Lee, Moon Geon; Seo, Hyo Jin; Shin, Jin Hyuk; Shin, Tai Sun; Yoon, Yang Ho; Kim, Min Yong; Choi, Jong Il; Kim, Jong Deog

2016-01-01

Microcystis aeruginosa, a freshwater microalga, is capable of producing and accumulating different types of sugars in its biomass which make it a good feedstock for bioethanol production. Present study aims to investigate the effect of different factors increasing growth rate and carbohydrates productivity of M. aeruginosa. MF media (modified BG11 media) and additional ingredients such as aminolevulinic acid (2 mM), lysine (2.28 mM), alanine (1 mM), and Naphthalene acetic acid (1 mM) as cytokine promoted M. aeruginosa growth and sugar contents. Salmonella showed growth-assisting effect on M. aeruginosa. Enhanced growth rate and carbohydrates contents were observed in M. aeruginosa culture grown at 25°C under red LED light of 90 μmolm(-2)s(-1) intensity. More greenish and carbohydrates rich M. aeruginosa biomass was prepared (final OD660 nm = 2.21 and sugar contents 10.39 mM/mL) as compared to control (maximum OD660 nm = 1.4 and sugar contents 3 mM/mL). The final algae biomass was converted to algae juice through a specific pretreatment method. The resulted algae Juice was used as a substrate in fermentation process. Highest yield of bioethanol (50 mM/mL) was detected when Brettanomyces custersainus, Saccharomyces cerevisiae, and Pichia stipitis were used in combinations for fermentation process as compared to their individual fermentation. The results indicated the influence of different factors on the growth rate and carbohydrates productivity of M. aeruginosa and its feasibility as a feedstock for fermentative ethanol production.

Asymmetries in the production of self-directed behavior by chimpanzees and gorillas during a computerized cognitive test.

PubMed

Wagner, Katherine E; Hopper, Lydia M; Ross, Stephen R

2016-03-01

Self-directed behaviors (SDBs) are a commonly used behavioral indicator of arousal in nonhuman primates. Experimental manipulations, designed to increase arousal and uncertainty, have been used to elicit SDB production in primates. Beyond measuring rates of SDB production, researchers have also recorded their lateralized production by primates, thought to reflect laterality of hemispheric brain control and response to emotion. Although a handful of such studies exist, all have been conducted with chimpanzees. Expanding on this line of inquiry, we tested both chimpanzees (N = 3) and gorillas (N = 3) in a serial learning task presented on a touchscreen interface that incorporated both EASY (two-item list) and HARD (four-item list) versions of the task. Although SDB production by the apes did not differ across the two levels of task complexity, both species produced higher rates of SDB when they made an error, regardless of task difficulty. Furthermore, the apes made more SDB with the left hand-directed to the right side of their body (contralateral SDB) and left side of their body (ipsilateral SDB)-when they made an incorrect response. There was no difference in the rate of SDB produced with the right hand across correct compared to incorrect trials. The apes' responses reflect previous reports that show humans are quicker at selecting negative emotional stimuli when using their left, compared to their right, hand (the reverse is true for positive stimuli). However, previous work has shown that chimpanzees are more likely to produce (contralateral) SDB with their right hand when aroused and so we discuss our results in relation to these findings and consider how they relate to the 'right hemisphere' and 'valence' models of emotional processing in apes.

Impacts of cloud water droplets on the OH production rate from peroxide photolysis.

PubMed

Martins-Costa, M T C; Anglada, J M; Francisco, J S; Ruiz-López, Manuel F

2017-12-06

Understanding the difference between observed and modeled concentrations of HO x radicals in the troposphere is a current major issue in atmospheric chemistry. It is widely believed that existing atmospheric models miss a source of such radicals and several potential new sources have been proposed. In recent years, interest has increased on the role played by cloud droplets and organic aerosols. Computer modeling of ozone photolysis, for instance, has shown that atmospheric aqueous interfaces accelerate the associated OH production rate by as much as 3-4 orders of magnitude. Since methylhydroperoxide is a main source and sink of HO x radicals, especially at low NO x concentrations, it is fundamental to assess what is the influence of clouds on its chemistry and photochemistry. In this study, computer simulations for the photolysis of methylhydroperoxide at the air-water interface have been carried out showing that the OH production rate is severely enhanced, reaching a comparable level to ozone photolysis.

Malolactic bioconversion using a Oenococcus oeni strain for cider production: effect of yeast extract supplementation.

PubMed

Herrero, Mónica; García, Luis A; Díaz, Mario

2003-12-01

Yeast extract addition to reconstituted apple juice had a positive impact on the development of the malolactic starter culture used to ensure malolactic fermentation in cider, using active but non-proliferating cells. In this work, the reuse of fermentation lees from cider is proposed as an alternative to the use of commercial yeast extract products. Malolactic enzymatic assays, both in whole cells and cell-free extracts, were carried out to determine the best time to harvest cells for use as an inoculum in cider. Cells harvested at the late exponential phase, the physiological stage of growth corresponding to the maximum values of specific malolactic activity, achieved a good rate of malic acid degradation in controlled cider fermentation. Under the laboratory conditions used, malic acid degradation rates in the fermentation media turned out to be near 2.0 and 2.5 times lower, compared with the rates obtained in whole-cell enzymatic assays, as useful data applicable to industrial cider production.

Process performance of high-solids batch anaerobic digestion of sewage sludge.

PubMed

Liao, Xiaocong; Li, Huan; Cheng, Yingchao; Chen, Nan; Li, Chenchen; Yang, Yuning

2014-01-01

The characteristics of high-solids anaerobic digestion (AD) of sewage sludge were investigated by comparison with conventional low-solids processes. A series of batch experiments were conducted under mesophilic condition and the initial solid contents were controlled at four levels of 1.79%, 4.47%, 10.28% and 15.67%. During these experiments, biogas production, organic degradation and intermediate products were monitored. The results verified that high-solids batch AD of sewage sludge was feasible. Compared with the low-solids AD with solid contents of 1.79% or 4.47%, the high-solids processes decreased the specific biogas yield per gram of sludge volatile solids slightly, achieved the same organic degradation rate of about 40% within extended degradation time, but increased the volumetric biogas production rate and the treatment capability of digesters significantly. The blocked mass and energy transfer, the low substrate to inoculum rate and the excessive cumulative free ammonia were the main factors impacting the performance of high-solids batch AD.

Oxidative damage, skin aging, antioxidants and a novel antioxidant rating system.

PubMed

Palmer, Debbie M; Kitchin, Jennifer Silverman

2010-01-01

It is believed that oxidative stress is caused by an imbalance between the production of reactive oxygen and a biological system's ability to neutralize the reactive intermediates. Oxidative damage occurs because of both intrinsic and extrinsic mechanisms. Together, intrinsic and extrinsic damage are the primary causes of skin aging. The skin uses a series of intrinsic antioxidants to protect itself from free radical damage. Naturally occurring extrinsic antioxidants have also been widely shown to offset and alleviate these changes. Unlike sunscreens, which have an SPF rating system to guide consumers in their purchases, there is no widely accepted method to choose antioxidant anti-aging products. ORAC (Oxygen Radical Absorbance Capacity) and ABEL-RAC (Analysis By Emitted Light-Relative Antioxidant Capacity), are both accepted worldwide as a standard measure of the antioxidant capacity of foods, and are rating systems that could be applied to all antioxidant skincare products. The standardization of antioxidant creams could revolutionize the cosmeceutical market and give physicians and consumers the ability to compare and choose effectively.

Gaseous nitrogen and bacterial responses to raw and digested dairy manure applications in incubated soil.

PubMed

Saunders, Olivia E; Fortuna, Ann-Marie; Harrison, Joe H; Cogger, Craig G; Whitefield, Elizabeth; Green, Tonia

2012-11-06

A study was conducted under laboratory conditions to compare rates of nitrous oxide (N(2)O) and ammonia (NH(3)) emissions when soil was amended with anaerobically digested dairy manure slurry containing <30% food byproducts, raw dairy manure slurry, or urea. Slurries were applied via surface and subsurface methods. A second objective was to correlate genes regulating nitrification and denitrification with rates of N(2)O production, slurry treatment, and application method. Ammonia volatilization from incubated soil ranged from 140 g kg(-1) of total N applied in digested slurry to 230 g kg(-1) in urea. Subsurface application of raw dairy manure slurry decreased ammonia volatilization compared with surface application. Anaerobic digestion increased N(2)O production. Cumulative N(2)O loss averaged 27 g kg(-1) of total N applied for digested slurry, compared with 5 g kg(-1) for raw dairy slurry. Genes of interest included a 16S rRNA gene selective for β-subgroup proteobacterial ammonia-oxidizers, amoA, narG, and nosZ quantified with quantitative polymerase chain reaction (qPCR) and real-time polymerase chain reaction (RT-PCR). Application of anaerobically digested slurry increased nitrifier and denitrifier gene copies that correlated with N(2)O production. Expression of all genes measured via mRNA levels was affected by N applications to soil. This study provides new information linking genetic markers in denitrifier and nitrifier populations to N(2)O production.

A WRF-Chem Analysis of Flash Rates, Lightning-NOx Production and Subsequent Trace Gas Chemistry of the 29-30 May 2012 Convective Event in Oklahoma During DC3

NASA Technical Reports Server (NTRS)

Cummings, Kristin A.; Pickering, Kenneth; Barth, Mary; Weinheimer, A.; Bela, M.; Li, Y; Allen, D.; Bruning, E.; MacGorman, D.; Rutledge, S.;

Enrofloxacin degradation in broiler chicken manure under various laboratory conditions.

PubMed

Slana, Marko; Sollner-Dolenc, Marija

2016-03-01

The rate of degradation of enrofloxacin in broiler chicken manure has been characterized in the laboratory according to the CVMP guideline on determining the fate of veterinary medicinal products in manure. Degradation was followed in a flow-through system under aerobic and anaerobic conditions, in the dark and in the presence of light. The rate of degradation of enrofloxacin and the formation of its degradation products are dependent on laboratory conditions. A rapid degradation of enrofloxacin in the dark was noticed, where a shorter degradation half-life under aerobic (DT50 = 59.1 days), comparing to anaerobic conditions (DT50 = 88.9 days), was determined. The presence of light slowed down the enrofloxacin degradation half-life, which was significantly shorter under aerobic (DT50 = 115.0 days), comparing to anaerobic conditions (DT50 = 190.8 days). Desethylene-enrofoxacin was the only degradation product formed, its concentrations ranged from 2.5 to 14.9 %. The concentration of the degradation product was approximately 2.5-fold higher under aerobic conditions. Enrofloxacin degradation in sterile manure incubated under sterile conditions was marginal comparing to non-sterile conditions; after 120 days of incubation, approximately 80 % of enrofloxacin was still present in manure and only 1 % of desethylene-enrofloxacin was formed. The present work demonstrates that enrofloxacin degradation in chicken manure is relatively fast when incubated in the dark under aerobic conditions which is the recommended incubation system for chicken manure according to CVMP guideline.

Investigating nutrient profiling and Health Star Ratings on core dairy products in Australia.

PubMed

Wellard, Lyndal; Hughes, Clare; Watson, Wendy L

2016-10-01

To determine whether the ratings from the Australian front-of-pack labelling scheme, Health Star Rating (HSR), and the ability to carry health claims using the Nutrient Profiling Scoring Criterion (NPSC) for core dairy products promote foods consistent with the Australian Dietary Guidelines. The Australian nutrient profiling model used for assessing eligibility for health claims was compared with the nutrient profiling model underpinning the HSR system to determine their agreement when assessing dairy products. Agreement between the extent to which products met nutrient profiling criteria and scored three stars or over using the HSR calculator was determined using Cohen's kappa tests. The four largest supermarket chains in Sydney, Australia. All available products in the milk, hard cheese, soft cheese and yoghurt categories (n 1363) were surveyed in March-May 2014. Nutrition composition and ingredients lists were recorded for each product. There was 'good' agreement between NPSC and HSR overall (κ=0·78; 95 % CI 0·75, 0·81; P<0·001), for hard cheeses (κ=0·72; 95 % CI 0·65, 0·79; P<0·001) and yoghurt (κ=0·79; 95 % CI 0·73, 0·86; P<0·001). There was 'fair' agreement for milk (κ=0·33; 95 % CI 0·20, 0·45; P<0·001) and 'very good' agreement for soft cheese (κ=0·84; 95 % CI 0·75, 0·92; P<0·001). Generally, products tended to have HSR consistent with other products of a similar type within their categories. For dairy products, the HSR scheme largely aligned with the NPSC used for determining eligibility for health claims. Both systems appeared be consistent with the Australian Dietary Guidelines for dairy products, with lower-fat products rating higher.

Combinatorial pathway optimization in Escherichia coli by directed co-evolution of rate-limiting enzymes and modular pathway engineering.

PubMed

Lv, Xiaomei; Gu, Jiali; Wang, Fan; Xie, Wenping; Liu, Min; Ye, Lidan; Yu, Hongwei

2016-12-01

Metabolic engineering of microorganisms for heterologous biosynthesis is a promising route to sustainable chemical production which attracts increasing research and industrial interest. However, the efficiency of microbial biosynthesis is often restricted by insufficient activity of pathway enzymes and unbalanced utilization of metabolic intermediates. This work presents a combinatorial strategy integrating modification of multiple rate-limiting enzymes and modular pathway engineering to simultaneously improve intra- and inter-pathway balance, which might be applicable for a range of products, using isoprene as an example product. For intra-module engineering within the methylerythritol-phosphate (MEP) pathway, directed co-evolution of DXS/DXR/IDI was performed adopting a lycopene-indicated high-throughput screening method developed herein, leading to 60% improvement of isoprene production. In addition, inter-module engineering between the upstream MEP pathway and the downstream isoprene-forming pathway was conducted via promoter manipulation, which further increased isoprene production by 2.94-fold compared to the recombinant strain with solely protein engineering and 4.7-fold compared to the control strain containing wild-type enzymes. These results demonstrated the potential of pathway optimization in isoprene overproduction as well as the effectiveness of combining metabolic regulation and protein engineering in improvement of microbial biosynthesis. Biotechnol. Bioeng. 2016;113: 2661-2669. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Selection of mutants tolerant of oxidative stress from respiratory cultures of Lactobacillus plantarum C17.

PubMed

Zotta, T; Ianniello, R G; Guidone, A; Parente, E; Ricciardi, A

2014-03-01

Lactobacillus plantarum is a lactic acid bacterium involved in the production of many fermented foods. Recently, several studies have demonstrated that aerobic or respiratory metabolism in this species leads to improved technological and stress response properties. We investigated respiratory growth, metabolite production and stress resistance of Lact. plantarum C17 during batch, fed-batch and chemostat cultivations under respiratory conditions. Sixty mutants were selected for their ability to tolerate oxidative stress using H2 O2 and menadione as selective agents and further screened for their capability to growth under anaerobic, respiratory and oxidative stress conditions. Dilution rate clearly affected the physiological state of cells and, generally, slow-growing cultures had improved survival to stresses, catalase production and oxygen uptake. Most mutants were more competitive in terms of biomass production and ROS degradation compared with wild-type strain (wt) C17 and two of these (C17-m19 and C17-m58) were selected for further experiments. This work confirms that, in Lact. plantarum, respiration and low growth rates confer physiological and metabolic advantages compared with anaerobic cultivation. Our strategy of natural selection successfully provides a rapid and inexpensive screening for a large number of strains and represents a food-grade approach of practical relevance in the production of starter and probiotic cultures. © 2013 The Society for Applied Microbiology.

Lipase-catalyzed biodiesel production from waste activated bleaching earth as raw material in a pilot plant.

PubMed

Park, Enoch Y; Sato, Masayasu; Kojima, Seiji

2008-05-01

The production of fatty acid methyl esters (FAMEs) from waste activated bleaching earth (ABE) discarded by the crude oil refining industry using lipase from Candida cylindracea was investigated in a 50-L pilot plant. Diesel oil or kerosene was used as an organic solvent for the transesterification of triglycerides embedded in the waste ABE. When 1% (w/w) lipase was added to waste ABE, the FAME content reached 97% (w/w) after reaction for 12 h at 25 degrees C with an agitation rate of 30 rpm. The FAME production rate was strongly dependent upon the amount of enzyme added. Mixtures of FAME and diesel oil at ratios of 45:55 (BDF-45) and 35:65 (BDF-35) were assessed and compared with the European specifications for biodiesel as automotive diesel fuel, as defined by pr EN 14214. The biodiesel quality of BDF-45 met the EN 14214 standard. BDF-45 was used as generator fuel, and the exhaust emissions were compared with those of diesel oil. The CO and SO2 contents were reduced, but nitrogen oxide emission increased by 10%. This is the first report of a pilot plant study of lipase-catalyzed FAME production using waste ABE as a raw material. This result demonstrates a promising reutilization method for the production of FAME from industrial waste resources containing vegetable oils for use as a biodiesel fuel.

Abiotic Degradation and Toxicological Impacts of Pharmaceuticals and Personal Care Products (PPCPs) in Surface Waters: Roles of Mineral Sediments and Solar Radiation

NASA Astrophysics Data System (ADS)

Rubasinghege, G. R. S.; Rijal, H.; Maldonado-Torres, S.; Gurung, R.; Rogelj, S.; Piyasena, M.

2017-12-01

The growing medical and personal needs of human populations have escalated release of pharmaceuticals and personal care products into surface waters. This work investigates abiotic degradation pathways of a particular PPCP, ibuprofen, in the presence of a major mineral component of sedimentation (kaolinite clay), as well as the health effects of the primary compound and its degradation products. Results from these studies showed that the rate and extent of ibuprofen degradation is greatly influenced by the presence of sedimentation particles and solar radiation. In the absence of solar radiation, the dominant reaction mechanism was observed to be the adsorption of ibuprofen onto sedimentation particle surface where surface silanol groups play a key role. In contrast, under solar radiation and in the presence of clay particles, ibuprofen breaks down to several fractions. The decay rates were at least 6-fold higher for irradiated samples compared to those of dark conditions. Toxicity of primary ibuprofen and its secondary residues were tested on three microorganisms: Bacillus megaterium, Pseudoaltermonas atlantica; and algae from the Chlorella genus. The results from the biological assays show that primary PPCP is more toxic than the mixture of secondary products. Overall, however, biological assays carried out using only 4-acetylbenzoic acid, the most abundant secondary product, show a higher toxic effect on algae compared to its parent compound.

Modeling the optimal central carbon metabolic pathways under feedback inhibition using flux balance analysis.

PubMed

De, Rajat K; Tomar, Namrata

2012-12-01

Metabolism is a complex process for energy production for cellular activity. It consists of a cascade of reactions that form a highly branched network in which the product of one reaction is the reactant of the next reaction. Metabolic pathways efficiently produce maximal amount of biomass while maintaining a steady-state behavior. The steady-state activity of such biochemical pathways necessarily incorporates feedback inhibition of the enzymes. This observation motivates us to incorporate feedback inhibition for modeling the optimal activity of metabolic pathways using flux balance analysis (FBA). We demonstrate the effectiveness of the methodology on a synthetic pathway with and without feedback inhibition. Similarly, for the first time, the Central Carbon Metabolic (CCM) pathways of Saccharomyces cerevisiae and Homo sapiens have been modeled and compared based on the above understanding. The optimal pathway, which maximizes the amount of the target product(s), is selected from all those obtained by the proposed method. For this, we have observed the concentration of the product inhibited enzymes of CCM pathway and its influence on its corresponding metabolite/substrate. We have also studied the concentration of the enzymes which are responsible for the synthesis of target products. We further hypothesize that an optimal pathway would opt for higher flux rate reactions. In light of these observations, we can say that an optimal pathway should have lower enzyme concentration and higher flux rates. Finally, we demonstrate the superiority of the proposed method by comparing it with the extreme pathway analysis.

Upper Limb Absence: Predictors of Work Participation and Work Productivity.

PubMed

Postema, Sietke G; Bongers, Raoul M; Brouwers, Michael A; Burger, Helena; Norling-Hermansson, Liselotte M; Reneman, Michiel F; Dijkstra, Pieter U; van der Sluis, Corry K

2016-06-01

To analyze work participation, work productivity, contributing factors, and physical work demands of individuals with upper limb absence (ULA). Cross-sectional study: postal survey (response rate, 45%). Twelve rehabilitation centers and orthopedic workshops. Individuals (n=207) with unilateral transverse upper limb reduction deficiency (RD) or acquired amputation (AA), at or proximal to the carpal level, between the ages of 18 and 65 years, and a convenience sample of control subjects (n=90) matched on age and sex. Not applicable. Employment status, self-reported work productivity measured with the Quality-Quantity method, and self-reported upper extremity work demands measured with the Upper Extremity Work Demands scale. Seventy-four percent of the individuals with RD and 57% of the individuals with AA were employed (vs 82% of the control group and 66% of the general population). Male sex, younger age, a medium or higher level of education, prosthesis use, and good general health were predictors of work participation. Work productivity was similar to that of the control group. Higher work productivity was inversely related to musculoskeletal complaint-related pain. When having predominantly mentally demanding work, individuals with ULA perceived higher upper extremity work demands compared with controls. Work participation of individuals with RD was slightly higher compared with that of the general population, whereas employment rates of individuals with AA were slightly lower. Furthermore, work productivity did not differ between individuals with RD, AA, and controls. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Comparison of cancer incidence between production and office workers at a shipyard in Korea: a retrospective cohort study from 1992 to 2005.

PubMed

Jeong, Kyoung-Sook; Kim, Yangho; Kim, Moon-Chan; Yoo, Cheol-In

2011-09-01

Cancer is a major concern in shipbuilding. Since 1970s, shipbuilding and repair has been a strategic industry in Korea, which has become currently the world's largest shipbuilding country. The aim of this study is to investigate the cancer incidence in shipyard workers in Korea. The cohort comprised 30,288 male employees (20,647 production workers and 9,641 office workers) ever employed between 1992 and 2005 in a shipyard in Korea. The authors compared the cancer incidence between the groups using the participants' hospital medical records and data received from Korea National Cancer Incidence Database and Korean National Statistical Office. The total number of cancers was 135 among office workers and 519 among production workers in the shipyard. The age-standardized cancer rates among office and production workers were 136.2 and 179.7 per 100,000 person-years, respectively. The standardized rate ratios for stomach cancer, liver cancer, and lung cancer in production workers compared with office workers were 1.67 (95% CI: 1.12-2.49), 2.13 (95% CI: 1.37-3.36), and 3.71 (95% CI: 1.68-8.19), respectively. The observed increase in stomach, liver, and lung cancers among production workers suggests that some occupational factors in the shipyard might have contributed to the increased cancer risk. Further study is needed to clarify the risk of those cancers and to identify the specific factors involved. Copyright © 2011 Wiley-Liss, Inc.

A Critical Assessment of Microbiological Biogas to Biomethane Upgrading Systems.

PubMed

Rittmann, Simon K-M R

2015-01-01

Microbiological biogas upgrading could become a promising technology for production of methane (CH(4)). This is, storage of irregular generated electricity results in a need to store electricity generated at peak times for use at non-peak times, which could be achieved in an intermediate step by electrolysis of water to molecular hydrogen (H(2)). Microbiological biogas upgrading can be performed by contacting carbon dioxide (CO(2)), H(2) and hydrogenotrophic methanogenic Archaea either in situ in an anaerobic digester, or ex situ in a separate bioreactor. In situ microbiological biogas upgrading is indicated to require thorough bioprocess development, because only low volumetric CH(4) production rates and low CH(4) fermentation offgas content have been achieved. Higher volumetric production rates are shown for the ex situ microbiological biogas upgrading compared to in situ microbiological biogas upgrading. However, the ex situ microbiological biogas upgrading currently suffers from H(2) gas liquid mass transfer limitation, which results in low volumetric CH(4) productivity compared to pure H(2)/CO(2) conversion to CH(4). If waste gas utilization from biological and industrial sources can be shown without reduction in volumetric CH(4) productivity, as well as if the aim of a single stage conversion to a CH(4) fermentation offgas content exceeding 95 vol% can be demonstrated, ex situ microbiological biogas upgrading with pure or enrichment cultures of methanogens could become a promising future technology for almost CO(2)-neutral biomethane production.

Predicting the effects of coastal hypoxia on vital rates of the planktonic copepod Acartia tonsa Dana.

PubMed

Elliott, David T; Pierson, James J; Roman, Michael R

2013-01-01

We describe a model predicting the effects of low environmental oxygen on vital rates (egg production, somatic growth, and mortality) of the coastal planktonic copepod Acartia tonsa. Hypoxic conditions can result in respiration rate being directly limited by oxygen availability. We hypothesized that A. tonsa egg production, somatic growth, and ingestion rates would all respond in a similar manner to low oxygen conditions, as a result of oxygen dependent changes in respiration rate. Rate data for A. tonsa egg production, somatic growth, and ingestion under low environmental oxygen were compiled from the literature and from supplementary experiments. The response of these rates to oxygen was compared by converting all to the analogous units in terms of oxygen utilization, which we termed analogous respiration rate. These analogous respiration rates, along with published measurements of respiration rates, were used to parameterize and evaluate the relationship between A. tonsa respiration rate and environmental oxygen. At 18 °C, our results suggest that A. tonsa experiences sub-lethal effects of hypoxia below an oxygen partial pressure of 8.1 kPa (~3.1 mg L(-1) = 2.3 mL L(-1)). The results of this study can be used to predict the effects of hypoxia on A. tonsa growth and mortality as related to environmental temperature and oxygen partial pressure. Such predictions will be useful as a way to incorporate the effects of coastal hypoxia into population, community, or ecosystem level models that include A. tonsa. This approach can also be used to characterize the effects of hypoxia on other aquatic organisms.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, Hans C.; Brislawn, Colin; Renslow, Ryan S.

Productivity is a major determinant of ecosystem diversity. Microbial ecosystems are the most diverse on the planet yet very few relationships between diversity and productivity have been reported as compared to macro-ecological studies. Here we evaluated the spatial relationships of productivity and microbiome diversity in a laboratory-cultivated photosynthetic mat. The goal was to determine how spatial diversification of microorganisms drives localized carbon and energy acquisition rates. We measured sub-millimeter depth profiles of net primary-productivity and gross oxygenic photosynthesis in the context of the localized microenvironment and community structure and observed negative correlations between species richness and productivity within the energy-replete,more » photic zone. Variations between localized community structures were associated with distinct taxa as well as environmental profiles describing a continuum of biological niches. Spatial regions corresponding to high primary productivity and photosynthesis rates had relatively low species richness and high evenness. Hence, this system exhibited negative species-productivity and species–energy relationships. These negative relationships may be indicative of photosynthetically-driven, light-controlled mat ecosystems that are able to be the most productive with a relatively smaller, even distributions of species that specialize within the highly-oxic, photic zones.« less

Survival and Growth of Probiotic Lactic Acid Bacteria in Refrigerated Pickle Products.

PubMed

Fan, Sicun; Breidt, Fred; Price, Robert; Pérez-Díaz, Ilenys

2017-01-01

We examined 10 lactic acid bacteria that have been previously characterized for commercial use as probiotic cultures, mostly for dairy products, including 1 Pediococcus and 9 Lactobacilli. Our objectives were to develop a rapid procedure for determining the long-term survivability of these cultures in acidified vegetable products and to identify suitable cultures for probiotic brined vegetable products. We therefore developed assays to measure acid resistance of these cultures to lactic and acetic acids, which are present in pickled vegetable products. We used relatively high acid concentrations (compared to commercial products) of 360 mM lactic acid and 420 mM acetic acid to determine acid resistance with a 1 h treatment. Growth rates were measured in a cucumber juice medium at pH 5.3, 4.2, and 3.8, at 30 °C and 0% to 2% NaCl. Significant differences in acid resistance and growth rates were found among the 10 cultures. In general, the acid resistant strains had slower growth rates than the acid sensitive strains. Based on the acid resistance data, selected cultures were tested for long-term survival in a simulated acidified refrigerated cucumber product. We found that one of the most acid resistant strains (Lactobacillus casei) could survive for up to 63 d at 4 °C without significant loss of viability at 10 8 CFU/mL. These data may aid in the development of commercial probiotic refrigerated pickle products. © 2016 Institute of Food Technologists®.

The effect of adjusting model inputs to achieve mass balance on time-dynamic simulations in a food-web model of Lake Huron

USGS Publications Warehouse

Langseth, Brian J.; Jones, Michael L.; Riley, Stephen C.

2014-01-01

Ecopath with Ecosim (EwE) is a widely used modeling tool in fishery research and management. Ecopath requires a mass-balanced snapshot of a food web at a particular point in time, which Ecosim then uses to simulate changes in biomass over time. Initial inputs to Ecopath, including estimates for biomasses, production to biomass ratios, consumption to biomass ratios, and diets, rarely produce mass balance, and thus ad hoc changes to inputs are required to balance the model. There has been little previous research of whether ad hoc changes to achieve mass balance affect Ecosim simulations. We constructed an EwE model for the offshore community of Lake Huron, and balanced the model using four contrasting but realistic methods. The four balancing methods were based on two contrasting approaches; in the first approach, production of unbalanced groups was increased by increasing either biomass or the production to biomass ratio, while in the second approach, consumption of predators on unbalanced groups was decreased by decreasing either biomass or the consumption to biomass ratio. We compared six simulation scenarios based on three alternative assumptions about the extent to which mortality rates of prey can change in response to changes in predator biomass (i.e., vulnerabilities) under perturbations to either fishing mortality or environmental production. Changes in simulated biomass values over time were used in a principal components analysis to assess the comparative effect of balancing method, vulnerabilities, and perturbation types. Vulnerabilities explained the most variation in biomass, followed by the type of perturbation. Choice of balancing method explained little of the overall variation in biomass. Under scenarios where changes in predator biomass caused large changes in mortality rates of prey (i.e., high vulnerabilities), variation in biomass was greater than when changes in predator biomass caused only small changes in mortality rates of prey (i.e., low vulnerabilities), and was amplified when environmental production was increased. When standardized to mean changes in biomass within each scenario, scenarios when vulnerabilities were low and when fishing mortality was increased explained the most variation in biomass. Our findings suggested that approaches to balancing Ecopath models have relatively little effect on changes in biomass over time, especially when compared to assumptions about how mortality rates of prey change in response to changes in predator biomass. We concluded that when constructing food-web models using EwE, determining the effect of changes in predator biomass on mortality rates of prey should be prioritized over determining the best way to balance the model.

Limits to the Positive Effect of Ocean Acidification on Macroalgal Primary Production, Interactions with Light and Temperature

NASA Astrophysics Data System (ADS)

Kubler, J.; Dudgeon, S. R.; Nisumaa, A. M.

2016-02-01

About one third of macroalgal species lack any carbon concentrating mechanism (CCM), which prevents carbon limitation under air equilibrium in other seaweed species. It is predicted that those species lacking CCM's will benefit from ongoing ocean acidification in terms of primary productivity and growth. The absolute sizes and pattern of those benefits are not known. Here, we compare the results of a model based on composite data from the literature, with a growth experiment using Plocamium cartilagineum, a broadly distributed rhodophyte species lacking a carbon concentrating mechanism and hypothesized to be carbon limited under current conditions. We grew P. cartilagineum, at 15 and 20°C in seawater aerated with a total of 53 different pCO2s (from 344 to 1053µatm), in 8 multiweek trials over 12 months. We measured growth and photosynthetic rates. A linear mixed model analysis was used to partition the effect sizes of drivers of variation in the experiment. The growth rates and maximum photosynthetic rates responded nonlinearly to OA, increasing with elevated pCO2 from recent atmospheric level to up 450µatm and decreasing at higher pCO2. Light harvesting efficiency was unaffected by pCO2 and inversely related to temperature. We were able to compare the results of the growth experiment directly to the model based on the additive effects of temperature and pCO2 on photosynthetic rates, finding concordance of the pattern of response. The size of the effect of pCO2 on growth rate in the experiment was greater than the effect predicted by the model for net primary productivity. These results predict that the benefit of OA for macroalgal growth may disappear as ocean acidification continues through this century.

The Effects of Exercise Intensity vs. Metabolic State on the Variability and Magnitude of Left Ventricular Twist Mechanics during Exercise

PubMed Central

Armstrong, Craig; Samuel, Jake; Yarlett, Andrew; Cooper, Stephen-Mark; Stembridge, Mike; Stöhr, Eric J.

2016-01-01

Increased left ventricular (LV) twist and untwisting rate (LV twist mechanics) are essential responses of the heart to exercise. However, previously a large variability in LV twist mechanics during exercise has been observed, which complicates the interpretation of results. This study aimed to determine some of the physiological sources of variability in LV twist mechanics during exercise. Sixteen healthy males (age: 22 ± 4 years, V˙O2peak: 45.5 ± 6.9 ml∙kg-1∙min-1, range of individual anaerobic threshold (IAT): 32–69% of V˙O2peak) were assessed at rest and during exercise at: i) the same relative exercise intensity, 40%peak, ii) at 2% above IAT, and, iii) at 40%peak with hypoxia (40%peak+HYP). LV volumes were not significantly different between exercise conditions (P > 0.05). However, the mean margin of error of LV twist was significantly lower (F2,47 = 2.08, P < 0.05) during 40%peak compared with IAT (3.0 vs. 4.1 degrees). Despite the same workload and similar LV volumes, hypoxia increased LV twist and untwisting rate (P < 0.05), but the mean margin of error remained similar to that during 40%peak (3.2 degrees, P > 0.05). Overall, LV twist mechanics were linearly related to rate pressure product. During exercise, the intra-individual variability of LV twist mechanics is smaller at the same relative exercise intensity compared with IAT. However, the absolute magnitude (degrees) of LV twist mechanics appears to be associated with the prevailing rate pressure product. Exercise tests that evaluate LV twist mechanics should be standardised by relative exercise intensity and rate pressure product be taken into account when interpreting results. PMID:27100099

The Effects of Exercise Intensity vs. Metabolic State on the Variability and Magnitude of Left Ventricular Twist Mechanics during Exercise.

PubMed

Armstrong, Craig; Samuel, Jake; Yarlett, Andrew; Cooper, Stephen-Mark; Stembridge, Mike; Stöhr, Eric J

2016-01-01

Increased left ventricular (LV) twist and untwisting rate (LV twist mechanics) are essential responses of the heart to exercise. However, previously a large variability in LV twist mechanics during exercise has been observed, which complicates the interpretation of results. This study aimed to determine some of the physiological sources of variability in LV twist mechanics during exercise. Sixteen healthy males (age: 22 ± 4 years, [Formula: see text]O2peak: 45.5 ± 6.9 ml∙kg-1∙min-1, range of individual anaerobic threshold (IAT): 32-69% of [Formula: see text]O2peak) were assessed at rest and during exercise at: i) the same relative exercise intensity, 40%peak, ii) at 2% above IAT, and, iii) at 40%peak with hypoxia (40%peak+HYP). LV volumes were not significantly different between exercise conditions (P > 0.05). However, the mean margin of error of LV twist was significantly lower (F2,47 = 2.08, P < 0.05) during 40%peak compared with IAT (3.0 vs. 4.1 degrees). Despite the same workload and similar LV volumes, hypoxia increased LV twist and untwisting rate (P < 0.05), but the mean margin of error remained similar to that during 40%peak (3.2 degrees, P > 0.05). Overall, LV twist mechanics were linearly related to rate pressure product. During exercise, the intra-individual variability of LV twist mechanics is smaller at the same relative exercise intensity compared with IAT. However, the absolute magnitude (degrees) of LV twist mechanics appears to be associated with the prevailing rate pressure product. Exercise tests that evaluate LV twist mechanics should be standardised by relative exercise intensity and rate pressure product be taken into account when interpreting results.

Integrated hydrogen production process from cellulose by combining dark fermentation, microbial fuel cells, and a microbial electrolysis cell.

PubMed

Wang, Aijie; Sun, Dan; Cao, Guangli; Wang, Haoyu; Ren, Nanqi; Wu, Wei-Min; Logan, Bruce E

2011-03-01

Hydrogen gas production from cellulose was investigated using an integrated hydrogen production process consisting of a dark fermentation reactor and microbial fuel cells (MFCs) as power sources for a microbial electrolysis cell (MEC). Two MFCs (each 25 mL) connected in series to an MEC (72 mL) produced a maximum of 0.43 V using fermentation effluent as a feed, achieving a hydrogen production rate from the MEC of 0.48 m(3) H(2)/m(3)/d (based on the MEC volume), and a yield of 33.2 mmol H(2)/g COD removed in the MEC. The overall hydrogen production for the integrated system (fermentation, MFC and MEC) was increased by 41% compared with fermentation alone to 14.3 mmol H(2)/g cellulose, with a total hydrogen production rate of 0.24 m(3) H(2)/m(3)/d and an overall energy recovery efficiency of 23% (based on cellulose removed) without the need for any external electrical energy input. Copyright © 2010 Elsevier Ltd. All rights reserved.

How Social Care Beneficiaries in Poland Rate Relative Harmfulness of Various Tobacco and Nicotine-Containing Products.

PubMed

Milcarz, Marek; Polańska, Kinga; Bak-Romaniszyn, Leokadia; Kaleta, Dorota

2017-09-07

The aim of the study was to examine how social care beneficiaries rate the relative harmfulness of tobacco/nicotine-containing products compared to traditional cigarettes. This information is crucial for the development of effective tobacco control strategies targeting disadvantaged populations. The cross-sectional study covered 1817 respondents who were taking advantage of social aid services offered by the local social care institutions in the Piotrkowski district, via face-to-face interviews. The linear regression analysis indicated that relative to women, men consider slim cigarettes, smokeless tobacco and e-cigarettes to be more harmful than traditional cigarettes ( p < 0.05). The smokers of traditional cigarettes reported menthol cigarettes to be less harmful than traditional cigarettes, relative to the non-smokers ( p = 0.05). The current results demonstrate that social care beneficiaries are not aware of the fact that some products are less harmful than others. Education concerning tobacco/nicotine products should include advice on how to reduce the adverse health effects of smoking (e.g., avoiding inhalation of combusted products), while driving the awareness that no nicotine-containing products are safe.

Bacteriocin Production with Lactobacillus amylovorus DCE 471 Is Improved and Stabilized by Fed-Batch Fermentation

PubMed Central

Callewaert, Raf; De Vuyst, Luc

2000-01-01

Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source. PMID:10653724

How Social Care Beneficiaries in Poland Rate Relative Harmfulness of Various Tobacco and Nicotine-Containing Products

PubMed Central

Milcarz, Marek; Polańska, Kinga; Bak-Romaniszyn, Leokadia; Kaleta, Dorota

2017-01-01

The aim of the study was to examine how social care beneficiaries rate the relative harmfulness of tobacco/nicotine-containing products compared to traditional cigarettes. This information is crucial for the development of effective tobacco control strategies targeting disadvantaged populations. The cross-sectional study covered 1817 respondents who were taking advantage of social aid services offered by the local social care institutions in the Piotrkowski district, via face-to-face interviews. The linear regression analysis indicated that relative to women, men consider slim cigarettes, smokeless tobacco and e-cigarettes to be more harmful than traditional cigarettes (p < 0.05). The smokers of traditional cigarettes reported menthol cigarettes to be less harmful than traditional cigarettes, relative to the non-smokers (p = 0.05). The current results demonstrate that social care beneficiaries are not aware of the fact that some products are less harmful than others. Education concerning tobacco/nicotine products should include advice on how to reduce the adverse health effects of smoking (e.g., avoiding inhalation of combusted products), while driving the awareness that no nicotine-containing products are safe. PMID:28880223

Comparing the efficacy of four immersion flush and static hydorgen peroxide and copper sulfate treatments on channel catfish eggs infected with water molds

USDA-ARS?s Scientific Manuscript database

Water mold infestations on channel catfish eggs lower the hatch rate (egg survival) and ultimately the number of catfish fry available for stocking in production ponds. This study compared the potential of two hydrogen peroxide (HP) and two copper sulfate pentahydrate (CSP) treatments to increase c...

Metabolic rate and environmental productivity: Well-provisioned animals evolved to run and idle fast

PubMed Central

Mueller, Pamela; Diamond, Jared

2001-01-01

Even among vertebrate species of the same body mass and higher-level taxonomic group, metabolic rates exhibit substantial differences, for which diverse explanatory factors—such as dietary energy content, latitude, altitude, temperature, and rainfall—have been postulated. A unifying underlying factor could be food availability, in turn controlled by net primary productivity (NPP) of the animal's natural environment. We tested this possibility by studying five North American species of Peromyscus mice, all of them similar in diet (generalist omnivores) and in gut morphology but differing by factors of up to 13 in NPP of their habitat of origin. We maintained breeding colonies of all five species in the laboratory under identical conditions and consuming identical diets. Basal metabolic rate (BMR) and daily ad libitum food intake both increased with NPP, which explained 88% and 90% of their variances, respectively. High-metabolism mouse species from high-NPP environments were behaviorally more active than were low-metabolism species from low-NPP environments. Intestinal glucose uptake capacity also increased with NPP (and with BMR and food intake), because species of high-NPP environments had larger small intestines and higher uptake rates. For metabolic rates of our five species, the driving environmental variable is environmental productivity itself (and hence food availability), rather than temporal variability of productivity. Thus, species that have evolved in the presence of abundant food run their metabolism “fast,” both while active and while idling, as compared with species of less productive environments, even when all species are given access to unlimited food. PMID:11606744

Higher plant modelling for life support applications: first results of a simple mechanistic model

NASA Astrophysics Data System (ADS)

Hezard, Pauline; Dussap, Claude-Gilles; Sasidharan L, Swathy

2012-07-01

In the case of closed ecological life support systems, the air and water regeneration and food production are performed using microorganisms and higher plants. Wheat, rice, soybean, lettuce, tomato or other types of eatable annual plants produce fresh food while recycling CO2 into breathable oxygen. Additionally, they evaporate a large quantity of water, which can be condensed and used as potable water. This shows that recycling functions of air revitalization and food production are completely linked. Consequently, the control of a growth chamber for higher plant production has to be performed with efficient mechanistic models, in order to ensure a realistic prediction of plant behaviour, water and gas recycling whatever the environmental conditions. Purely mechanistic models of plant production in controlled environments are not available yet. This is the reason why new models must be developed and validated. This work concerns the design and test of a simplified version of a mathematical model coupling plant architecture and mass balance purposes in order to compare its results with available data of lettuce grown in closed and controlled chambers. The carbon exchange rate, water absorption and evaporation rate, biomass fresh weight as well as leaf surface are modelled and compared with available data. The model consists of four modules. The first one evaluates plant architecture, like total leaf surface, leaf area index and stem length data. The second one calculates the rate of matter and energy exchange depending on architectural and environmental data: light absorption in the canopy, CO2 uptake or release, water uptake and evapotranspiration. The third module evaluates which of the previous rates is limiting overall biomass growth; and the last one calculates biomass growth rate depending on matter exchange rates, using a global stoichiometric equation. All these rates are a set of differential equations, which are integrated with time in order to provide total biomass fresh weight during the full growth duration. The model predicts a growth with exponential rate at the beginning and then it becomes linear for the end of the growth; this follows rather accurately the experimental data. Even if this model is too simple to be realistic for more complex plants in changing environments, this is the first step for an integrated approach of plant growth accounting of architectural and mass transfer limitations.

Prospective change control analysis of transfer of platelet concentrate production from a specialized stem cell transplantation unit to a blood transfusion center.

PubMed

Sigle, Joerg-Peter; Medinger, Michael; Stern, Martin; Infanti, Laura; Heim, Dominik; Halter, Joerg; Gratwohl, Alois; Buser, Andreas

2012-01-01

Specialized centers claim a need for blood component production independent from the general blood transfusion services. We performed a prospective change control analysis of the transfer of platelet (PLT) production for hematological patients at the University Hospital Basel from the Department of Hematology to the Blood Transfusion Centre, Swiss Red Cross, Basel in February 2006. We wanted to demonstrate that neither quality nor transfusion outcome was affected. Production quantity and efficiency, product quality and transfusion outcome were systematically recorded. A 2-year pretransfer period was compared to a 2 year post-transfer period. After transfer production quantity at the Blood Transfusion Centre increased from 4,483 to 6,190 PLT concentrates. Production efficiency increased with a significant decrease in the rate of expired products (18% vs. 8%; P < 0.001). Product quality showed a slight decrease in median PLT count per unit (2.84 vs. 2.75 × 10(11); P < 0.001) and a slight increase in mean storage time prior to transfusion (3.18 vs. 3.30 days; P < 0.001). Transfusion outcome measured as median corrected count increment one hour post-transfusion (10.5 vs. 10.7; P = 0.3) and the rate of patients with inadequate post-transfusion increment (31.5% vs. 32.1%; P = 0.6) did not differ. Supply and quality of PLT products was maintained after the transfer of PLT production to the Blood Transfusion Centre. An optimization of the supply chain process with markedly decreased expiration rates was achieved. These results argue against the need of specialized PLT production sites for selected patient groups. Copyright © 2012 Wiley Periodicals, Inc.

Photosynthetic strategies of two Mojave Desert shrubs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleinkopf, G.E.; Hartsock, T.L.; Wallace, A.

1980-01-01

Photosynthetic production of two Mojave Desert shrubs was measured under natural growing conditions. Measurements of photosynthesis, transpiration, resistances to water vapor flux, soil moisture potential, and tissue water potential were made. Atriplex canescens (Pursh) Nutt., a member of the C/sub 4/ biochemical carbon dioxide fixation group was highly competitive in growth rate and production during conditions of adequate soil moisture. As soil moisture conditions declined to minus 40 bars, the net photosynthetic rate of Atriplex decreased to zero. However, the C/sub 3/ shrub species Larrea tridentata (Sesse and Moc. ex DC.) Cov. was able to maintain positive net photosynthetic productionmore » during conditions of high temperature and extreme low soil moisture through the major part of the season. The comparative advantages of the C/sub 4/ versus the C/sub 3/ pathway of carbon fixation was lost between these two species as the soil moisture potential declined to minus 40 bars. Desert plants have diffferent strategies for survival, one of the strategies being the C/sub 4/ biochemical carbon fixation pathway. However, many of the plants are members of the C/sub 3/ group. In this instance, the C/sub 4/ fixation pathway does not confer an added advantage to the productivity of the species in the Mojave Desert. Species distribution based on comparative photosynthetic production is discussed« less

The Contribution of Intestinal Gluconeogenesis to Glucose Homeostasis Is Low in 2-Day-Old Pigs.

PubMed

Cherbuy, Claire; Vaugelade, Pierre; Labarthe, Simon; Honvo-Houeto, Edith; Darcy-Vrillon, Béatrice; Watford, Malcolm; Duée, Pierre-Henri

2017-03-01

Background: Active gluconeogenesis is essential to maintain blood glucose concentrations in neonatal piglets because of the high glucose requirements after birth. In several adult mammals, the liver, kidney, and possibly the gut may exhibit gluconeogenesis during fasting and insulinopenic conditions. During the postnatal period, the intestine expresses all of the gluconeogenic enzymes, suggesting the potential for gluconeogenesis. Galactose in milk is a potential gluconeogenic precursor for newborns. Objective: Our aim was to quantify the rate of intestinal glucose production from galactose in piglets compared with the overall rate of glucose production. Methods: A single bolus of [U- 14 C]-galactose was injected into 2-d-old piglets (females and males; mean ± SEM weight: 1.64 ± 0.07 kg) through a gastric catheter. Galactosemia, glycemia, and glucose turnover rate (assessed by monitoring d-[6- 3 H]-glucose) were monitored. Intestinal glucose production from [U- 14 C]-galactose was calculated from [U- 14 C]-glucose appearance in the blood and isotopic dilution. Galactose metabolism was also investigated in vitro in enterocytes isolated from 2-d-old piglets that were incubated with increasing concentrations of galactose. Results: In piglet enterocytes, galactose metabolism was active (mean ± SEM maximum rate of reaction: 2.26 ± 0.45 nmol · min -1 · 10 6 cells -1 ) and predominantly oriented toward lactate and pyruvate production (74.0% ± 14.5%) rather than glucose production (26.0% ± 14.5%). In conscious piglets, gastric galactose administration led to an increase in arterial galactosemia (from 0 to 1.0 ± 0.8 mmol/L) and glycemia (35% ± 12%). The initial increase in arterial glycemia after galactose administration was linked to an increase in glucose production rate (33% ± 15%) rather than to a decrease in glucose utilization rate (3% ± 6%). The contribution of intestinal glucose production from galactose was <10% of total glucose production in 2-d-old piglets. Conclusion: Our results indicate that there is a low contribution to glucose homeostasis from intestinal gluconeogenesis in 2-d-old piglets. © 2017 American Society for Nutrition.

Comparing generic and innovator drugs: a review of 12 years of bioequivalence data from the United States Food and Drug Administration.

PubMed

Davit, Barbara M; Nwakama, Patrick E; Buehler, Gary J; Conner, Dale P; Haidar, Sam H; Patel, Devvrat T; Yang, Yongsheng; Yu, Lawrence X; Woodcock, Janet

2009-10-01

In the US, manufacturers seeking approval to market a generic drug product must submit data demonstrating that the generic formulation provides the same rate and extent of absorption as (ie, is bioequivalent to) the innovator drug product. Thus, most orally administered generic drug products in the US are approved based on results of one or more clinical bioequivalence studies. To evaluate how well the bioequivalence measures of generic drugs approved in the US over a 12-year period compare with those of their corresponding innovator counterparts. This retrospective analysis compared the generic and innovator bioequivalence measures from 2070 single-dose clinical bioequivalence studies of orally administered generic drug products approved by the Food and Drug Administration (FDA) from 1996 to 2007 (12 y). Bioequivalence measures evaluated were drug peak plasma concentration (C(max)) and area under the plasma drug concentration versus time curve (AUC), representing drug rate and extent of absorption, respectively. The generic/innovator C(max) and AUC geometric mean ratios (GMRs) were determined from each of the bioequivalence studies, which used from 12 to 170 subjects. The GMRs from the 2070 studies were averaged. In addition, the distribution of differences between generic means and innovator means was determined for both C(max) and AUC. The mean +/- SD of the GMRs from the 2070 studies was 1.00 +/- 0.06 for C(max) and 1.00 +/- 0.04 for AUC. The average difference in C(max) and AUC between generic and innovator products was 4.35% and 3.56%, respectively. In addition, in nearly 98% of the bioequivalence studies conducted during this period, the generic product AUC differed from that of the innovator product by less than 10%. The criteria used to evaluate generic drug bioequivalence studies support the FDA's objective of approving generic drug formulations that are therapeutically equivalent to their innovator counterparts.

Comparing extraction rates of fossil fuel producers against global climate goals

NASA Astrophysics Data System (ADS)

Rekker, Saphira A. C.; O'Brien, Katherine R.; Humphrey, Jacquelyn E.; Pascale, Andrew C.

2018-06-01

Meeting global and national climate goals requires action and cooperation from a multitude of actors1,2. Current methods to define greenhouse gas emission targets for companies fail to acknowledge the unique influence of fossil fuel producers: combustion of reported fossil fuel reserves has the potential to push global warming above 2 °C by 2050, regardless of other efforts to mitigate climate change3. Here, we introduce a method to compare the extraction rates of individual fossil fuel producers against global climate targets, using two different approaches to quantify a burnable fossil fuel allowance (BFFA). BFFAs are calculated and compared with cumulative extraction since 2010 for the world's ten largest investor-owned companies and ten largest state-owned entities (SOEs), for oil and for gas, which together account for the majority of global oil and gas reserves and production. The results are strongly influenced by how BFFAs are quantified; allocating based on reserves favours SOEs over investor-owned companies, while allocating based on production would require most reduction to come from SOEs. Future research could refine the BFFA to account for equity, cost-effectiveness and emissions intensity.

CWA stand-off detection, a new figure-of-merit: the field surface scanning rate

NASA Astrophysics Data System (ADS)

Bernascolle, Philippe F.

2013-05-01

All the manufacturers of stand-off CWA detectors communicate on the "same" characteristics. And one can find these parameters in the comparison table published between all the different products [1]. These characteristics are for example the maximum detection range, the number of different detectable compounds, the weight, the price, etc… All these parameters are good to compare products between them, but they omit one very important point: the reaction time in case of an unexpected incoming chemical threat, in the case of the surveillance application. To answer this important question, we imagine a new parameter: the Field Surface Scanning Rate (FSSR). This value is a classical parameter in astronomical survey, use by astronomers to compare the performance of different telescopes, they compute the quantity of sky (in sky square degrees) analyzed per unit of time by the system. In this paper we will compare this new figure-of-merit, the FSSR, of some commercially off the shelf stand-off detector. The comparison between classical FTIR system and gas imaging system in term of FSSR will be presented.

Gaseous metabolism of leghorns and broilers during early growth: existence energy rate.

PubMed

Denbow, D M; Kuenzel, W J

1981-06-01

Existence energy rate (EER) was measured on male Ross x Arbor Acre broilers and DeKalb 231 x Cornell White Leghorns from day of hatch to 8 weeks of age. The EER was measured in an open circuit respirometer with feed and water available ad libitum. The log of heat production (kilocalories per bird per day) was plotted against the log for body weight (kilograms) for each type bird. Data from broilers and Leghorns were then compared using analysis of covariance. The equations best describing EER for Ross x Arbor Acre broilers and DeKalb 231 x Cornell White Leghorns were Y = 148W.77 and Y = 110W.74, respectively, where Y equals kcal/bird-day and W equals body weight (kg). There was no significant difference in slope (.77 compared to .74) between the two types of poultry; however, broilers had a significantly higher EER than Leghorns (147 compared to 110) when analyzed at equal body weights. Apparently the greater food intake and activity associated with feeding effected the marked increase in heat production by broilers.

Effects of housing system on the costs of commercial egg production1

PubMed Central

Matthews, W. A.; Sumner, D. A.

2014-01-01

This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. PMID:25480736

Effects of housing system on the costs of commercial egg production.

PubMed

Matthews, W A; Sumner, D A

2015-03-01

This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. © The Author 2015. Published by Oxford University Press on behalf of Poultry Science Association.

Gallic Acid as an Oxygen Scavenger in Bio-Based Multilayer Packaging Films

PubMed Central

Pant, Astrid F.; Sängerlaub, Sven; Müller, Kajetan

2017-01-01

Oxygen scavengers are used in food packaging to protect oxygen-sensitive food products. A mixture of gallic acid (GA) and sodium carbonate was used as an oxygen scavenger (OSc) in bio-based multilayer packaging films produced in a three-step process: compounding, flat film extrusion, and lamination. We investigated the film surface color as well as oxygen absorption at different relative humidities (RHs) and temperatures, and compared the oxygen absorption of OSc powder, monolayer films, and multilayer films. The films were initially brownish-red in color but changed to greenish-black during oxygen absorption under humid conditions. We observed a maximum absorption capacity of 447 mg O2/g GA at 21 °C and 100% RH. The incorporation of GA into a polymer matrix reduced the rate of oxygen absorption compared to the GA powder because the polymer acted as a barrier to oxygen and water vapor diffusion. As expected, the temperature had a significant effect on the initial absorption rate of the multilayer films; the corresponding activation energy was 75.4 kJ/mol. Higher RH significantly increased the oxygen absorption rate. These results demonstrate for the first time the production and the properties of a bio-based multilayer packaging film with GA as the oxygen scavenger. Potential applications include the packaging of food products with high water activity (aw > 0.86). PMID:28772849

Gallic Acid as an Oxygen Scavenger in Bio-Based Multilayer Packaging Films.

PubMed

Pant, Astrid F; Sängerlaub, Sven; Müller, Kajetan

2017-05-03

Oxygen scavengers are used in food packaging to protect oxygen-sensitive food products. A mixture of gallic acid (GA) and sodium carbonate was used as an oxygen scavenger (OSc) in bio-based multilayer packaging films produced in a three-step process: compounding, flat film extrusion, and lamination. We investigated the film surface color as well as oxygen absorption at different relative humidities (RHs) and temperatures, and compared the oxygen absorption of OSc powder, monolayer films, and multilayer films. The films were initially brownish-red in color but changed to greenish-black during oxygen absorption under humid conditions. We observed a maximum absorption capacity of 447 mg O₂/g GA at 21 °C and 100% RH. The incorporation of GA into a polymer matrix reduced the rate of oxygen absorption compared to the GA powder because the polymer acted as a barrier to oxygen and water vapor diffusion. As expected, the temperature had a significant effect on the initial absorption rate of the multilayer films; the corresponding activation energy was 75.4 kJ/mol. Higher RH significantly increased the oxygen absorption rate. These results demonstrate for the first time the production and the properties of a bio-based multilayer packaging film with GA as the oxygen scavenger. Potential applications include the packaging of food products with high water activity (a w > 0.86).

Racial and Ethnic Differences in Tobacco Information Seeking and Information Sources: Findings From the 2015 Health Information National Trends Survey.

PubMed

Nguyen, Anh B; Robinson, Joelle; O'Brien, Erin Keely; Zhao, Xiaoquan

2017-09-01

This article describes sources of health information, types of tobacco information sought, and trust in sources of tobacco information among U.S. racial/ethnic groups (Whites, Blacks, Hispanics, Asian and Pacific Islanders, and Other). Cross-sectional data (N = 3,788) from a nationally representative survey, HINTS-FDA 2015, were analyzed to examine unadjusted and adjusted associations between race/ethnicity and (a) first source of health information, (b) tobacco information seeking, and (c) trust in sources of tobacco information. Adjusted associations controlled for current tobacco product use and sociodemographic variables. Findings indicated that the Internet was the most common first source of health information while health care providers were the second most common source for all racial/ethnic groups. Tobacco-related health information seeking was more prevalent than other tobacco product information seeking. Unadjusted analyses indicated that a higher proportion of Whites sought other tobacco product information compared to Asians and Pacific Islanders. Trust was rated highest for doctors while trust for health organizations was rated second highest. Asians and Pacific Islanders had higher trust in the government compared to all other groups. Blacks had higher trust in religious organizations compared to all other groups besides Hispanics. Blacks had higher trust for tobacco companies compared to Whites and Other. Many of these differences were attenuated in adjusted analyses. This research has implications for tobacco control practice and policymaking by identifying potential dissemination strategies.

Dose rate in brachytherapy using after-loading machine: pulsed or high-dose rate?

PubMed

Hannoun-Lévi, J-M; Peiffert, D

2014-10-01

Since February 2014, it is no longer possible to use low-dose rate 192 iridium wires due to the end of industrial production of IRF1 and IRF2 sources. The Brachytherapy Group of the French society of radiation oncology (GC-SFRO) has recommended switching from iridium wires to after-loading machines. Two types of after-loading machines are currently available, based on the dose rate used: pulsed-dose rate or high-dose rate. In this article, we propose a comparative analysis between pulsed-dose rate and high-dose rate brachytherapy, based on biological, technological, organizational and financial considerations. Copyright © 2014 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Algal productivity and nitrate assimilation in an effluent dominated concrete lined stream

USGS Publications Warehouse

Kent, Robert; Belitz, Kenneth; Burton, Carmen

2005-01-01

This study examined algal productivity and nitrate assimilation in a 2.85 km reach of Cucamonga Creek, California, a concrete lined channel receiving treated municipal wastewater. Stream nitrate concentrations observed at two stations indicated nearly continuous loss throughout the diel study. Nitrate loss in the reach was approximately 11 mg/L/d or 1.0 g/m2/d as N, most of which occurred during daylight. The peak rate of nitrate loss (1.13 mg/l/hr) occurred just prior to an afternoon total CO2 depletion. Gross primary productivity, as estimated by a model using the observed differences in dissolved oxygen between the two stations, was 228 mg/L/d, or 21 g/m2/d as O2. The observed diel variations in productivity, nitrate loss, pH, dissolved oxygen, and CO2indicate that nitrate loss was primarily due to algal assimilation. The observed levels of productivity and nitrate assimilation were exceptionally high on a mass per volume basis compared to studies on other streams; these rates occurred because of the shallow stream depth. This study suggests that concrete‐lined channels can provide an important environmental service: lowering of nitrate concentrations similar to rates observed in biological treatment systems.

Investigation of a submerged membrane reactor for continuous biomass hydrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malmali, Mohammadmahdi; Stickel, Jonathan; Wickramasinghe, S. Ranil

Enzymatic hydrolysis of cellulose is one of the most costly steps in the bioconversion of lignocellulosic biomass. Use of a submerged membrane reactor has been investigated for continuous enzymatic hydrolysis of cellulose thus allowing for greater use of the enzyme compared to a batch process. Moreover, the submerged 0.65 μm polyethersulfone microfiltration membrane avoids the need to pump a cellulose slurry through an external loop. Permeate containing glucose is withdrawn at pressures slightly below atmospheric pressure. The membrane rejects cellulose particles and cellulase enzyme bound to cellulose. Our proof-of-concept experiments have been conducted using a modified, commercially available membrane filtrationmore » cell under low fluxes around 75 L/(m2 h). The operating flux is determined by the rate of glucose production. Maximizing the rate of glucose production involves optimizing mixing, reactor holding time, and the time the feed is held in the reactor prior to commencement of membrane filtration and continuous operation. When we maximize glucose production rates it will require that we operate it at low glucose concentration in order to minimize the adverse effects of product inhibition. Consequently practical submerged membrane systems will require a combined sugar concentration step in order to concentrate the product sugar stream prior to fermentation.« less

Optical measurements of atomic oxygen concentration, temperature and nitric oxide production rate in flames

NASA Astrophysics Data System (ADS)

Myhr, Franklin Henry

An optical method for measuring nitric oxide (NO) production rates in flames was developed and characterized in a series of steady, one-dimensional, atmospheric-pressure laminar flames of 0.700 Hsb2/0.199 Nsb2/0.101 COsb2 or 0.700 CHsb4/0.300 Nsb2 (by moles) with dry air, with equivalence ratios from 0.79 to 1.27. Oxygen atom concentration, (O), was measured by two-photon laser-induced fluorescence (LIF), temperature was measured by ultraviolet Rayleigh scattering, and nitrogen concentration was calculated from supplied reactant flows; together this information was used to calculate the NO production rate through the thermal (Zel'dovich) mechanism. Measurements by two other techniques were compared with results from the above method. In the first comparison, gas sampling was used to measure axial NO concentration profiles, the slopes of which were multiplied by velocity to obtain total NO production rates. In the second comparison, LIF measurements of hydroxyl radical (OH) were used with equilibrium water concentrations and a partial equilibrium assumption to find (O). Nitric oxide production rates from all three methods agreed reasonably well. Photolytic interference was observed during (O) LIF measurements in all of the flames; this is the major difficulty in applying the optical technique. Photolysis of molecular oxygen in lean flames has been well documented before, but the degree of interference observed in the rich flames suggests that some other molecule is also dissociating; the candidates are OH, CO, COsb2 and Hsb2O. An extrapolative technique for removing the effects of photolysis from (O) LIF measurements worked well in all flames where NO production was significant. Using the optical method to measure NO production rates in turbulent flames will involve a tradeoff among spatial resolution, systematic photolysis error, and random shot noise. With the conventional laser system used in this work, a single pulse with a resolution of 700 mum measured NO production rates as low as 2×10sp{-3}\\ gmol/msp3-s with photolysis error less than a factor of two and random shot noise of 35%. By using a double-pulse technique and relaxing the spatial resolution to 2 mm, production rates down to 2×10sp{-5}\\ gmol/msp3-s can be measured with shot noise of 22%. Extension to two-dimensional imaging will require a multipass cell or very large pulse energy (˜200 mJ at 226 nm).

A comparison of ground-based and aircraft-based methane emission flux estimates in a western oil and natural gas production basin

NASA Astrophysics Data System (ADS)

Snare, Dustin A.

Recent increases in oil and gas production from unconventional reservoirs has brought with it an increase of methane emissions. Estimating methane emissions from oil and gas production is complex due to differences in equipment designs, maintenance, and variable product composition. Site access to oil and gas production equipment can be difficult and time consuming, making remote assessment of emissions vital to understanding local point source emissions. This work presents measurements of methane leakage made from a new ground-based mobile laboratory and a research aircraft around oil and gas fields in the Upper Green River Basin (UGRB) of Wyoming in 2014. It was recently shown that the application of the Point Source Gaussian (PSG) method, utilizing atmospheric dispersion tables developed by US EPA (Appendix B), is an effective way to accurately measure methane flux from a ground-based location downwind of a source without the use of a tracer (Brantley et al., 2014). Aircraft measurements of methane enhancement regions downwind of oil and natural gas production and Planetary Boundary Layer observations are utilized to obtain a flux for the entire UGRB. Methane emissions are compared to volumes of natural gas produced to derive a leakage rate from production operations for individual production sites and basin-wide production. Ground-based flux estimates derive a leakage rate of 0.14 - 0.78 % (95 % confidence interval) per site with a mass-weighted average (MWA) of 0.20 % for all sites. Aircraft-based flux estimates derive a MWA leakage rate of 0.54 - 0.91 % for the UGRB.

Isobutanol production as an alternative metabolic sink to rescue the growth deficiency of the glycogen mutant of Synechococcus elongatus PCC 7942

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, XQ; Shen, CR; Liao, JC

2014-03-04

Glycogen synthesis initiated by glucose-1-phosphate adenylyltransferase (glgC) represents a major carbon storage route in cyanobacteria which could divert a significant portion of assimilated carbon. Significant growth retardation in cyanobacteria with glgC knocked out (Delta glgC) has been reported in high light conditions. Here, we knocked out the glgC gene and analyzed its effects on carbon distribution in an isobutanol-producing strain of Synechococcus elongatus PCC7942 and its parental wild-type strain. We showed that isobutanol production was able to partially rescue the growth of Delta glgC mutant where the growth rescue effect positively correlated with the rate of isobutanol production. Using (NaHCO3)-C-14more » incorporation analysis, we observed a 28 % loss of total carbon fixation rate in the Delta glgC mutant compared to the wild-type. Upon expression of the isobutanol production pathway in Delta glgC mutant, the total carbon fixation rate was restored to the wild-type level. Furthermore, we showed that 52 % of the total carbon fixed was redirected into isobutanol biosynthesis in the Delta glgC mutant expressing enzymes for isobutanol production, which is 2.5 times higher than that of the wild-type expressing the same enzymes. These results suggest that biosynthesis of non-native product such as isobutanol can serve as a metabolic sink for replacing glycogen to rescue growth and restore carbon fixation rate. The rescue effect may further serve as a platform for cyanobacteria energy and carbon metabolism study.« less

Incorporating benthic community changes into hydrochemical-based projections of coral reef calcium carbonate production under ocean acidification

NASA Astrophysics Data System (ADS)

Shaw, Emily C.; Hamylton, Sarah M.; Phinn, Stuart R.

2016-06-01

The existence of coral reefs is dependent on the production and maintenance of calcium carbonate (CaCO3) framework that is produced through calcification. The net production of CaCO3 will likely decline in the future, from both declining net calcification rates (decreasing calcification and increasing dissolution) and shifts in benthic community composition from calcifying organisms to non-calcifying organisms. Here, we present a framework for hydrochemical studies that allows both declining net calcification rates and changes in benthic community composition to be incorporated into projections of coral reef CaCO3 production. The framework involves upscaling net calcification rates for each benthic community type using mapped proportional cover of the benthic communities. This upscaling process was applied to the reef flats at One Tree and Lady Elliot reefs (Great Barrier Reef) and Shiraho Reef (Okinawa), and compared to existing data. Future CaCO3 budgets were projected for Lady Elliot Reef, predicting a decline of 53 % from the present value by end-century (800 ppm CO2) without any changes to benthic community composition. A further 5.7 % decline in net CaCO3 production is expected for each 10 % decline in calcifier cover, and net dissolution is predicted by end-century if calcifier cover drops below 18 % of the present extent. These results show the combined negative effect of both declining net calcification rates and changing benthic community composition on reefs and the importance of considering both processes for determining future reef CaCO3 production.

[Impact of air fresheners and deodorizers on the indoor total volatile organic compounds].

PubMed

Jinno, Hideto; Tanaka-Kagawa, Toshiko; Obama, Tomoko; Miyagawa, Makoto; Yoshikawa, Jun; Komatsu, Kazuhiro; Tokunaga, Hiroshi

2007-01-01

Indoor air quality is a growing health concern because of the increased incidence of the building-related illness, such as sick-building syndrome and multiple chemical sensitivity/idiopathic environmental intolerance. In order to effectively reduce the unnecessary chemical exposure in the indoor environment, it would be important to quantitatively compare the emissions from many types of sources. Besides the chemical emissions from the building materials, daily use of household products may contribute at significant levels to the indoor volatile organic compounds (VOCs). In this study, we investigated the emission rate of VOCs and carbonyl compounds for 30 air fresheners and deodorizers by the standard small chamber test method (JIS A 1901). The total VOC (TVOC) emission rates of these household products ranged from the undetectable level (< 20 microg/unit/h) to 6,900 microg/unit/h. The mean TVOC emission rate of the air fresheners for indoor use (16 products) was 1,400 microg/unit/ h and that of the deodorizers for indoor use (6 products) was 58 microg/unit/h, indicating that the fragrances in the products account for the major part of the TVOC emissions. Based on the emission rates, the impacts on the indoor TVOC were estimated by the simple model with a volume of 17.4 m3 and a ventilation frequency of 0.5 times/h. The mean of the TVOC increment for the indoor air fresheners was 170 microg/m3, accounting for 40% of the current provisional target value, 400 microg/m3. These results suggest that daily use of household products can significantly influence the indoor air quality.

Combinatorial application of two aldehyde oxidoreductases on isobutanol production in the presence of furfural.

PubMed

Seo, Hyung-Min; Jeon, Jong-Min; Lee, Ju Hee; Song, Hun-Suk; Joo, Han-Byul; Park, Sung-Hee; Choi, Kwon-Young; Kim, Yong Hyun; Park, Kyungmoon; Ahn, Jungoh; Lee, Hongweon; Yang, Yung-Hun

2016-01-01

Furfural is a toxic by-product formulated from pretreatment processes of lignocellulosic biomass. In order to utilize the lignocellulosic biomass on isobutanol production, inhibitory effect of the furfural on isobutanol production was investigated and combinatorial application of two oxidoreductases, FucO and YqhD, was suggested as an alternative strategy. Furfural decreased cell growth and isobutanol production when only YqhD or FucO was employed as an isobutyraldehyde oxidoreductase. However, combinatorial overexpression of FucO and YqhD could overcome the inhibitory effect of furfural giving higher isobutanol production by 110% compared with overexpression of YqhD. The combinatorial oxidoreductases increased furfural detoxification rate 2.1-fold and also accelerated glucose consumption 1.4-fold. When it compares to another known system increasing furfural tolerance, membrane-bound transhydrogenase (pntAB), the combinatorial aldehyde oxidoreductases were better on cell growth and production. Thus, to control oxidoreductases is important to produce isobutanol using furfural-containing biomass and the combinatorial overexpression of FucO and YqhD can be an alternative strategy.

LanzaTech- Capturing Carbon. Fueling Growth.

ScienceCinema

NONE

2018-01-16

LanzaTech will design a gas fermentation system that will significantly improve the rate at which methane gas is delivered to a biocatalyst. Current gas fermentation processes are not cost effective compared to other gas-to-liquid technologies because they are too slow for large-scale production. If successful, LanzaTech's system will process large amounts of methane at a high rate, reducing the energy inputs and costs associated with methane conversion.

Effect of beta-adrenergic blockade with timolol on myocardial blood flow during exercise after myocardial infarction in the dog.

PubMed

Herzog, C A; Aeppli, D P; Bache, R J

1984-12-01

The effect of beta-adrenergic blockade with timolol (40 micrograms/kg) on myocardial blood flow during rest and graded treadmill exercise was assessed in 12 chronically instrumented dogs 10 to 14 days after myocardial infarction was produced by acute left circumflex coronary artery occlusion. During exercise at comparable external work loads, the heart rate-systolic blood pressure product was significantly decreased after timilol, with concomitant reductions of myocardial blood flow in normal, border and central ischemic areas (p less than 0.001) and increases in subendocardial/subepicardial blood flow ratios (p less than 0.05). In addition to the blunted chronotropic response to exercise, timolol exerted an effect on myocardial blood flow that was not explained by changes in heart rate or blood pressure. At comparable rate-pressure products during exercise, total myocardial blood flow was 24% lower after timolol (p less than 0.02) and flow was redistributed from subepicardium to subendocardium in all myocardial regions. Thus, timolol altered myocardial blood flow during exercise by two separate mechanisms: a negative chronotropic effect, and a significant selective reduction of subepicardial perfusion independent of changes in heart rate or blood pressure with transmural redistribution of flow toward the subendocardium.

Lightning on Jupiter - Rate, energetics, and effects

NASA Technical Reports Server (NTRS)

Lewis, J. S.

1980-01-01

Voyager data on the optical and radio-frequency detection of lightning discharges in the atmosphere of Jupiter suggest a stroke rate significantly lower than on the earth. The efficiency of conversion of atmospheric convective energy flux into lightning is almost certainly less than on the earth, probably near 10 to the -7th rather than the terrestrial value of 10 to the -4th. At this level the rate of production of complex organic molecules by lightning and by thunder shock waves is negligible compared to the rates of known photochemical processes for forming colored inorganic solids.

Primary production export flux in Marguerite Bay (Antarctic Peninsula): Linking upper water-column production to sediment trap flux

NASA Astrophysics Data System (ADS)

Weston, Keith; Jickells, Timothy D.; Carson, Damien S.; Clarke, Andrew; Meredith, Michael P.; Brandon, Mark A.; Wallace, Margaret I.; Ussher, Simon J.; Hendry, Katharine R.

2013-05-01

A study was carried out to assess primary production and associated export flux in the coastal waters of the western Antarctic Peninsula at an oceanographic time-series site. New, i.e., exportable, primary production in the upper water-column was estimated in two ways; by nutrient deficit measurements, and by primary production rate measurements using separate 14C-labelled radioisotope and 15N-labelled stable isotope uptake incubations. The resulting average annual exportable primary production estimates at the time-series site from nutrient deficit and primary production rates were 13 and 16 mol C m-2, respectively. Regenerated primary production was measured using 15N-labelled ammonium and urea uptake, and was low throughout the sampling period. The exportable primary production measurements were compared with sediment trap flux measurements from 2 locations; the time-series site and at a site 40 km away in deeper water. Results showed ˜1% of the upper mixed layer exportable primary production was exported to traps at 200 m depth at the time-series site (total water column depth 520 m). The maximum particle flux rate to sediment traps at the deeper offshore site (total water column depth 820 m) was lower than the flux at the coastal time-series site. Flux of particulate organic carbon was similar throughout the spring-summer high flux period for both sites. Remineralisation of particulate organic matter predominantly occurred in the upper water-column (<200 m depth), with minimal remineralisation below 200 m, at both sites. This highly productive region on the Western Antarctic Peninsula is therefore best characterised as 'high recycling, low export'.

Lightning NOx Production and Its Consequences for Tropospheric Chemistry

NASA Technical Reports Server (NTRS)

Pickering, Kenneth E.

2005-01-01

Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the design of lightning parameterizations for global chemical transport models. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MMS) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO x in thunderstorms and ground-l;>ased lightning observations, has been used to constrain the amount of NO produced per flash. Cloud and chemistry simulations for several case studies of storms in different environments will be presented. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested for each storm. The resulting NOx mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. This result simplifies the lightning parameterization for global models (ie., an algorithm for estimating the IC/CG ratio is not necessary). Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. When combined with the global flash rate of 44 flashes per second from NASA's Optical Transient Detector (OTD) measurements, these estimates and the results from other techniques yield global NO production rates of2-9 TgN/year. Simulations of the photochemistry over the 24 hours following a storm has been performed to determine the additional ozone production which can be attributed to lightning NO. Convective transport of HOx precursors leads to the generation of a HOx plume which substantially aids the downstream ozone production.

An Assessment of Some Design Constraints on Heat Production of a 3D Conceptual EGS Model Using an Open-Source Geothermal Reservoir Simulation Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yidong Xia; Mitch Plummer; Robert Podgorney

2016-02-01

Performance of heat production process over a 30-year period is assessed in a conceptual EGS model with a geothermal gradient of 65K per km depth in the reservoir. Water is circulated through a pair of parallel wells connected by a set of single large wing fractures. The results indicate that the desirable output electric power rate and lifespan could be obtained under suitable material properties and system parameters. A sensitivity analysis on some design constraints and operation parameters indicates that 1) the fracture horizontal spacing has profound effect on the long-term performance of heat production, 2) the downward deviation anglemore » for the parallel doublet wells may help overcome the difficulty of vertical drilling to reach a favorable production temperature, and 3) the thermal energy production rate and lifespan has close dependence on water mass flow rate. The results also indicate that the heat production can be improved when the horizontal fracture spacing, well deviation angle, and production flow rate are under reasonable conditions. To conduct the reservoir modeling and simulations, an open-source, finite element based, fully implicit, fully coupled hydrothermal code, namely FALCON, has been developed and used in this work. Compared with most other existing codes that are either closed-source or commercially available in this area, this new open-source code has demonstrated a code development strategy that aims to provide an unparalleled easiness for user-customization and multi-physics coupling. Test results have shown that the FALCON code is able to complete the long-term tests efficiently and accurately, thanks to the state-of-the-art nonlinear and linear solver algorithms implemented in the code.« less

Impact of ambient odors on food intake, saliva production and appetite ratings.

PubMed

Proserpio, Cristina; de Graaf, Cees; Laureati, Monica; Pagliarini, Ella; Boesveldt, Sanne

2017-05-15

The aim of this study was to investigate the effect of ambient odor exposure on appetite, salivation and food intake. 32 normal-weight young women (age: 21.4±5.3year; BMI: 21.7±1.9kg/m 2 ) attended five test sessions in a non-satiated state. Each participant was exposed to ambient odors (chocolate, beef, melon and cucumber), in a detectable but mild concentration, and to a control condition (no-odor exposure). During each condition, at different time points, participants rated appetite for 15 food products, and saliva was collected. After approximately 30min, ad libitum intake was measured providing a food (chocolate rice, high-energy dense product) that was congruent with one of the odors they were exposed to. A significant odor effect on food intake (p=0.034) and salivation (p=0.017) was found. Exposure to odors signaling high-energy dense products increased food intake (243.97±22.84g) compared to control condition (206.94±24.93g; p=0.03). Consistently, salivation was increased significantly during chocolate and beef exposure (mean: 0.494±0.050g) compared to control condition (0.417±0.05g; p=0.006). Even though odor exposure did not induce specific appetite for congruent products (p=0.634), appetite scores were significantly higher during odor exposure (p<0.0001) compared to the no-odor control condition and increased significantly over time (p=0.010). Exposure to food odors seems to drive behavioral and physiological responses involved in eating behavior, specifically for odors and foods that are high in energy density. This could have implications for steering food intake and ultimately influencing the nutritional status of people. Copyright © 2017 Elsevier Inc. All rights reserved.

Acetate and bicarbonate assimilation and metabolite formation in Chlamydomonas reinhardtii: a 13C-NMR study.

PubMed

Singh, Himanshu; Shukla, Manish R; Chary, Kandala V R; Rao, Basuthkar J

2014-01-01

Cellular metabolite analyses by (13)C-NMR showed that C. reinhardtii cells assimilate acetate at a faster rate in heterotrophy than in mixotrophy. While heterotrophic cells produced bicarbonate and CO2aq, mixotrophy cells produced bicarbonate alone as predominant metabolite. Experiments with singly (13)C-labelled acetate ((13)CH(3)-COOH or CH(3)-(13)COOH) supported that both the (13)C nuclei give rise to bicarbonate and CO2(aq). The observed metabolite(s) upon further incubation led to the production of starch and triacylglycerol (TAG) in mixotrophy, whereas in heterotrophy the TAG production was minimal with substantial accumulation of glycerol and starch. Prolonged incubation up to eight days, without the addition of fresh acetate, led to an increased TAG production at the expense of bicarbonate, akin to that of nitrogen-starvation. However, such TAG production was substantially high in mixotrophy as compared to that in heterotrophy. Addition of mitochondrial un-coupler blocked the formation of bicarbonate and CO2(aq) in heterotrophic cells, even though acetate uptake ensued. Addition of PSII-inhibitor to mixotrophic cells resulted in partial conversion of bicarbonate into CO2(aq), which were found to be in equilibrium. In an independent experiment, we have monitored assimilation of bicarbonate via photoautotrophy and found that the cells indeed produce starch and TAG at a much faster rate as compared to that in mixotrophy and heterotrophy. Further, we noticed that the accumulation of starch is relatively more as compared to TAG. Based on these observations, we suggest that acetate assimilation in C. reinhardtii does not directly lead to TAG formation but via bicarbonate/CO2(aq) pathways. Photoautotrophic mode is found to be the best growth condition for the production of starch and TAG and starch in C. reinhardtii.

Acetate and Bicarbonate Assimilation and Metabolite Formation in Chlamydomonas reinhardtii: A 13C-NMR Study

PubMed Central

Singh, Himanshu; Shukla, Manish R.; Chary, Kandala V. R.; Rao, Basuthkar J.

2014-01-01

Cellular metabolite analyses by 13C-NMR showed that C. reinhardtii cells assimilate acetate at a faster rate in heterotrophy than in mixotrophy. While heterotrophic cells produced bicarbonate and CO2 aq, mixotrophy cells produced bicarbonate alone as predominant metabolite. Experiments with singly 13C-labelled acetate (13CH3-COOH or CH3-13COOH) supported that both the 13C nuclei give rise to bicarbonate and CO2 aq. The observed metabolite(s) upon further incubation led to the production of starch and triacylglycerol (TAG) in mixotrophy, whereas in heterotrophy the TAG production was minimal with substantial accumulation of glycerol and starch. Prolonged incubation up to eight days, without the addition of fresh acetate, led to an increased TAG production at the expense of bicarbonate, akin to that of nitrogen-starvation. However, such TAG production was substantially high in mixotrophy as compared to that in heterotrophy. Addition of mitochondrial un-coupler blocked the formation of bicarbonate and CO2 aq in heterotrophic cells, even though acetate uptake ensued. Addition of PSII-inhibitor to mixotrophic cells resulted in partial conversion of bicarbonate into CO2 aq, which were found to be in equilibrium. In an independent experiment, we have monitored assimilation of bicarbonate via photoautotrophy and found that the cells indeed produce starch and TAG at a much faster rate as compared to that in mixotrophy and heterotrophy. Further, we noticed that the accumulation of starch is relatively more as compared to TAG. Based on these observations, we suggest that acetate assimilation in C. reinhardtii does not directly lead to TAG formation but via bicarbonate/CO2 aq pathways. Photoautotrophic mode is found to be the best growth condition for the production of starch and TAG and starch in C. reinhardtii. PMID:25207648

Postprandial Gastrointestinal Function Differs after Acute Administration of Sourdough Compared with Brewer's Yeast Bakery Products in Healthy Adults.

PubMed

Polese, Barbara; Nicolai, Emanuele; Genovese, Daniela; Verlezza, Viviana; La Sala, Carmine N; Aiello, Marco; Inglese, Marianna; Incoronato, Mariarosaria; Sarnelli, Giovanni; De Rosa, Tiziana; Schiatti, Alfio; Mondelli, Francesco; Ercolini, Danilo; Cuomo, Rosario

2018-02-01

Europeans consume large quantities of bakery products, although these are known as one of the food categories that potentially leads to postprandial symptoms (such as fullness and bloating). The aim of this study was to evaluate the effects of sourdough baked goods on gastric emptying and gastrointestinal fermentation and symptoms in healthy people. In a double-blind, randomized crossover study, 2 sourdough croissants (SCs) or 2 brewer's yeast croissants (BCs) were served as single meals to 17 healthy adults [9 women; age range: 18-40 y; body mass index range (in kg/m2): 18-24]. Gastric volume (GV) was evaluated by magnetic resonance to calculate gastric-emptying rate in the 3-h interval after croissant ingestion. A hydrogen breath test was performed to measure hydrogen production after SC and BC ingestion. Palatability and postprandial gastrointestinal symptoms (discomfort, nausea, fullness, and bloating) over a 4-h period after the meal were evaluated. The area under the curve (AUC) was used to evaluate the overall effects on all variables tested. The total GV AUC was reduced by 11% during the 3 h after the consumption of SCs compared with BCs (P = 0.02). Hydrogen production during the 4-h interval after ingestion of SCs was 30% lower than after BCs (P = 0.03). SCs were rated as being >2 times as palatable as BCs (P < 0.001). The overall severity of postprandial symptoms was 36% lower during the 4 h after intake of SCs compared with BCs (P = 0.05). Sourdough bakery products could promote better postprandial gastrointestinal function in healthy adults and be more acceptable than those prepared with brewer's yeast. This trial was registered at www.clinicaltrials.gov as NCT03207516.

Antibacterial Efficacy of Several Surgical Hand Preparation Products Used by Veterinary Students.

PubMed

Chou, Po-Yen; Doyle, Aimie J; Arai, Shiori; Burke, Pierre J; Bailey, Trina R

2016-05-01

To compare the antibacterial efficacy of different surgical hand antisepsis protocols used by veterinary students. Prospective, randomized, controlled study. Third year veterinary students (n=45). The participants were randomly assigned to 4 of the following 12 hand preparation product/time combinations: nonabrasive hand scrub method with 4% chlorhexidine gluconate (CH); hand rub with a mixture of 30% 1-propanol and 45% 2-propanol solution (MPS), 70% 2-propanol solution (IPS), or 61% ethanol solution with 1% chlorhexidine gluconate (ES/CH), with a contact time of 1.5, 3, or 5 minutes. Antibacterial efficacy was assessed after surgical hand preparation and at the end of surgery. Log reductions of total bacterial colony forming unit (CFU)/mL and positive aerobic culture rates were compared using multivariable analysis of variance and multivariable logistic regression, respectively. After surgical hand preparation, CH and ES/CH provided significantly higher log CFU reduction and lower positive culture rate for Gram-positive and spore-forming bacteria compared to MPS and IPS. Increase in contact time did not provide significant improvement in bacterial reduction. At the end of surgery, ES/CH provided significantly higher log CFU reduction compared to IPS and lower positive culture rate for Gram-positive bacteria compared to CH, MPS, and IPS. Increase in contact time significantly improved log CFU reduction in ES/CH and MPS groups. In our population of veterinary students ES/CH hand rubs or CH scrubs were more effective in reducing bacterial CFU during surgical hand preparation than MPS or IPS. © Copyright 2016 by The American College of Veterinary Surgeons.

Lyman-alpha observations of Comet West /1975n/

NASA Technical Reports Server (NTRS)

Opal, C. B.; Carruthers, G. R.

1977-01-01

The rate of hydrogen production of Comet West is studied through rocket observation of solar Lyman-alpha radiation resonantly scattered by the escaping hydrogen atoms. Two sets of Lyman-alpha exposure sequences are used to obtain computer-smoothed brightness contour (isophote) maps covering a density range of 100:1. A simple radial outflow model is applied to the contour maps to determine the rate of hydrogen production (3.2 by 10 to the 30th power atoms/sec.) Discrepancies between the observed shape of the outer isophotes and predicted models may be explained by optical depth effects, or by the presence of small pieces of the comet's nucleus distributed along the orbit. Hydrogen, carbon, and oxygen production for Comet West and Comet Kohoutek are compared; differences may be accounted for by variations in the composition or evolution of the two comets.

Cranking up the heat: relationships between energetically costly song features and the increase in thorax temperature in male crickets and katydids.

PubMed

Erregger, Bettina; Kovac, Helmut; Stabentheiner, Anton; Hartbauer, Manfred; Römer, Heinrich; Schmidt, Arne K D

2017-07-15

Sexual displays of acoustically signalling insects are used in the context of mate attraction and mate choice. While energetic investment in sound production can increase the reproductive success of the sender, this entails metabolic costs. Resource allocation to sexually selected, reproductive traits can trade off against allocation to naturally selected traits (e.g. growth, immunity) when individuals' energy budgets are limited. Estimating the magnitude of the costs invested in acoustic signalling is necessary to understand this trade-off and its influence on fitness and life history. To compare the costs associated with acoustic signalling for two ensiferan species, we simultaneously took respiratory measurements to record the rate of CO 2 production and used infrared thermography to measure the increase in thorax temperature. Furthermore, to identify what combinations of acoustic parameters were energetically costly for the sender, we recorded the calling songs of 22 different cricket and katydid species for a comparative analysis and measured their thorax temperature while they sang. Acoustic signalling was energetically costly for Mecopoda sp. and Anurogryllus muticus , requiring a 12- and 16-fold increase over resting levels in the CO 2 production rate. Moreover, calling increased thorax temperature, on average by 7.6 and 5.8°C, respectively. We found that the song intensity and effective calling rate, not simply the chirp/trill duty cycle or the pulse rate alone, were good predictors for the thorax temperature increase in males. © 2017. Published by The Company of Biologists Ltd.

Acetoacetate is a more efficient energy-yielding substrate for human mesenchymal stem cells than glucose and generates fewer reactive oxygen species.

PubMed

Board, Mary; Lopez, Colleen; van den Bos, Christian; Callaghan, Richard; Clarke, Kieran; Carr, Carolyn

2017-07-01

Stem cells have been assumed to demonstrate a reliance on anaerobic energy generation, suited to their hypoxic in vivo environment. However, we found that human mesenchymal stem cells (hMSCs) have an active oxidative metabolism with a range of substrates. More ATP was consistently produced from substrate oxidation than glycolysis by cultured hMSCs. Strong substrate preferences were shown with the ketone body, acetoacetate, being oxidised at up to 35 times the rate of glucose. ROS-generation was 45-fold lower during acetoacetate oxidation compared with glucose and substrate preference may be an adaptation to reduce oxidative stress. The UCP2 inhibitor, genipin, increased ROS production with either acetoacetate or glucose by 2-fold, indicating a role for UCP2 in suppressing ROS production. Addition of pyruvate stimulated acetoacetate oxidation and this combination increased ATP production 27-fold, compared with glucose alone, which has implications for growth medium composition. Oxygen tension during culture affected metabolism by hMSCs. Between passages 2 and 5, rates of both glycolysis and substrate-oxidation increased at least 2-fold for normoxic (20% O 2 )- but not hypoxic (5% O 2 )-cultured hMSCs, despite declining growth rates and no detectable signs of differentiation. Culture of the cells with 3-hydroxybutyrate abolished the increased rates of these pathways. These findings have implications for stem cell therapy, which necessarily involves in vitro culture of cells, since low passage number normoxic cultured stem cells show metabolic adaptations without detectable changes in stem-like status. Copyright © 2017. Published by Elsevier Ltd.

Modeling growth of three bakery product spoilage molds as a function of water activity, temperature and pH.

PubMed

Dagnas, Stéphane; Onno, Bernard; Membré, Jeanne-Marie

2014-09-01

The objective of this study was to quantify the effect of water activity, pH and storage temperature on the growth of Eurotium repens, Aspergillus niger and Penicillium corylophilum, isolated from spoiled bakery products. Moreover, the behaviors of these three mold species were compared to assess whether a general modeling framework may be set and re-used in future research on bakery spoilage molds. The mold growth was modeled by building two distinct Gamma-type secondary models: one on the lag time for growth and another one on the radial growth rate. A set of 428 experimental growth curves was generated. The effect of temperature (15-35 °C), water activity (0.80-0.98) and pH (3-7) was assessed. Results showed that it was not possible to apply the same set of secondary model equations to the three mold species given that the growth rate varied significantly with the factors pH and water activity. In contrast, the temperature effect on both growth rate and lag time of the three mold species was described by the same equation. The equation structure and model parameter values of the Gamma models were also compared per mold species to assess whether a relationship between lag time and growth rate existed. There was no correlation between the two growth responses for E. repens, but a slight one for A. niger and P. corylophilum. These findings will help in determining bakery product shelf-life and guiding future work in the predictive mycology field. Copyright © 2014 Elsevier B.V. All rights reserved.

Evaluation of coloring efficacy of lac dye in comminuted meat product.

PubMed

Divya; Singh, R P; Baboo, B; Prasad, K M

2011-06-01

Effect of incorporation of graded levels (4, 6, 8, 10, 25 ppm) of lac dye on coloring efficacy and possible use of this natural color in processed meat products was studied. Inclusion of lac dye at different concentrations did not affect the pH significantly whereas a linear increase in the Lovibond red color unit of chicken nuggets was noted with raising the level of lac dye from 4 to 10 ppm. The sensory rating for color was highest at addition level of 25 ppm of lac dye and it was comparable to color score of the product containing 200 ppm sodium nitrite. Lac dye inclusion in nuggets at all concentrations studied had better antimicrobial properties as compared to 200 ppm sodium nitrite. It was concluded that lac dye from 10 to 25 ppm could be incorporated in comminuted meat products as a natural colorant with antimicrobial action.

Mixotrophic cultivation of Chlorella vulgaris using industrial dairy waste as organic carbon source.

PubMed

Abreu, Ana P; Fernandes, Bruno; Vicente, António A; Teixeira, José; Dragone, Giuliano

2012-08-01

Growth parameters and biochemical composition of the green microalga Chlorella vulgaris cultivated under different mixotrophic conditions were determined and compared to those obtained from a photoautotrophic control culture. Mixotrophic microalgae showed higher specific growth rate, final biomass concentration and productivities of lipids, starch and proteins than microalgae cultivated under photoautotrophic conditions. Moreover, supplementation of the inorganic culture medium with hydrolyzed cheese whey powder solution led to a significant improvement in microalgal biomass production and carbohydrate utilization when compared with the culture enriched with a mixture of pure glucose and galactose, due to the presence of growth promoting nutrients in cheese whey. Mixotrophic cultivation of C. vulgaris using the main dairy industry by-product could be considered a feasible alternative to reduce the costs of microalgal biomass production, since it does not require the addition of expensive carbohydrates to the culture medium. Copyright © 2012 Elsevier Ltd. All rights reserved.

Production of neutral species in Titan's ionosphere through dissociative recombination of ions

NASA Astrophysics Data System (ADS)

Plessis, Sylvain; Carrasco, Nathalie; Dobrijevic, Michel; Pernot, Pascal

2012-05-01

The production rates of neutral species by dissociative recombination (DR) of molecular ions with electrons in the ionosphere of Titan are quantified by a new model, including, for the first time, all the available kinetic data on this process. The calculation is based on the ion densities measured by the INMS instrument on Cassini orbiter during flyby T19 at 1100 km altitude. These production rates are compared with those predicted by photochemical models: we calculate that for many neutral species, DR has larger production rates than neutral chemistry. Concerning molecular growth in Titan's ionosphere, DR is shown to have two antagonistic effects: (1) a global chemical lysis of ions through C-C and C-N bond breaking (missed by the "H-loss" DR paradigm); and (2) an enhancement of the neutral chemistry by production of reactive radicals, such as C2H or NH2. Further exploration of this chemistry requires the development of ionospheric coupled models taking explicitly into account the richness of the DR process and the strong impact of ions on the budget of neutral species. This study emphasizes also the urgent need of additional experimental studies about DR of molecular ions, with two priorities: evaluation of the impact of the temperature of ions on the rates and fragmentation patterns, and the systematic study of the fragmentation patterns of CxHyNz+ ions with more than four heavy atoms (m/z > 60 u).

Biowaiver monographs for immediate release solid oral dosage forms: piroxicam.

PubMed

Shohin, Igor E; Kulinich, Julia I; Ramenskaya, Galina V; Abrahamsson, Bertil; Kopp, Sabine; Langguth, Peter; Polli, James E; Shah, Vinod P; Groot, D W; Barends, Dirk M; Dressman, Jennifer B

2014-02-01

Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing piroxicam in the free acid form are reviewed. Piroxicam solubility and permeability, its therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA), and corresponding dissolution data are taken into consideration. The available data suggest that according to the current biopharmaceutics classification system (BCS) and all current guidances, piroxicam would be assigned to BCS Class II. The extent of piroxicam absorption seems not to depend on manufacturing conditions or excipients, so the risk of bioinequivalence in terms of area under the curve (AUC) is very low, but the rate of absorption (i.e., BE in terms of Cmax ) can be affected by the formulation. Current in vitro dissolution methods may not always reflect differences in terms of Cmax for BCS Class II weak acids; however, minor differences in absorption rate of piroxicam would not subject the patient to unacceptable risks: as piroxicam products may be taken before or after meals, the rate of absorption cannot be considered crucial to drug action. Therefore, a biowaiver for IR piroxicam solid oral dosage form is considered feasible, provided that (a) the test product contains only excipients, which are also present in IR solid oral drug products containing piroxicam, which have been approved in ICH or associated countries, for instance, those presented in Table 3 of this paper; (b) both the test and comparator drug products dissolve 85% in 30 min or less at pH 1.2, 4.5, and 6.8; and (c) the test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8. When not all of these conditions can be fulfilled, BE of the products should be established in vivo. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Evaluation of TRMM Ground-Validation Radar-Rain Errors Using Rain Gauge Measurements

NASA Technical Reports Server (NTRS)

Wang, Jianxin; Wolff, David B.

2009-01-01

Ground-validation (GV) radar-rain products are often utilized for validation of the Tropical Rainfall Measuring Mission (TRMM) spaced-based rain estimates, and hence, quantitative evaluation of the GV radar-rain product error characteristics is vital. This study uses quality-controlled gauge data to compare with TRMM GV radar rain rates in an effort to provide such error characteristics. The results show that significant differences of concurrent radar-gauge rain rates exist at various time scales ranging from 5 min to 1 day, despite lower overall long-term bias. However, the differences between the radar area-averaged rain rates and gauge point rain rates cannot be explained as due to radar error only. The error variance separation method is adapted to partition the variance of radar-gauge differences into the gauge area-point error variance and radar rain estimation error variance. The results provide relatively reliable quantitative uncertainty evaluation of TRMM GV radar rain estimates at various times scales, and are helpful to better understand the differences between measured radar and gauge rain rates. It is envisaged that this study will contribute to better utilization of GV radar rain products to validate versatile spaced-based rain estimates from TRMM, as well as the proposed Global Precipitation Measurement, and other satellites.

Nicotine replacement therapy, tobacco products, and electronic cigarettes in pharmacies in St. Louis, Missouri.

PubMed

Barnoya, Joaquin; Jin, Linda; Hudmon, Karen Suchanek; Schootman, Mario

2015-01-01

To compare availability of nicotine replacement therapy (NRT), tobacco products, and electronic cigarettes (e-cigarettes) in pharmacies in St. Louis, MO. Cross-sectional study, on-site store audits of 322 pharmacies. St. Louis, MO. 242 eligible community pharmacies located in the study area. Pharmacies were visited by trained research assistants who conducted a 5- to 10-minute store audit using a paper-based data collection tool. Availability, accessibility, and pricing of NRT as a function of neighborhood poverty rate and proportion of black residents as well as availability of tobacco products and e-cigarettes. NRT availability decreased as neighborhood poverty rate increased (P = 0.02). Availability without pharmacy personnel assistance also decreased with increasing poverty rate (r = -0.19; 95% CI = -0.06, -0.31) and higher percentage of black residents (r = -0.18; 95% CI = -0.06, -0.31). Prices were lower in neighborhoods with higher poverty rates (P = 0.02) and a higher percentage of black residents (P = 0.03). E-cigarettes were available in 43% of pharmacies, and their availability and price did not differ by poverty rate or percentage of black residents. Low access to NRT might perpetuate smoking disparities in disadvantaged and racially diverse neighborhoods. Study data support policies to ensure equal NRT access to reduce disparities.

N2O production by nitrifier denitrification in the Benguela Upwelling System

NASA Astrophysics Data System (ADS)

Frame, C. H.; Hou, L.; Lehmann, M. F.

2014-12-01

The Benguela upwelling system off the coast of southwestern Africa is an important zone of marine N2O production whose upwelling rates vary seasonally. Here we present N2O stable isotopic and isotopomeric data collected during a period of high upwelling (September 2013) and low upwelling (January 2014). During both periods, 15N-nitrite and 15N-ammonium tracer inucbation experiments were used to investigate N2O production by ammonia oxidizing microorganisms in the top 150m of the water column. N2O production from 15N-ammonium was not measurable during these incubations. However, we detected N2O production from 15N-nitrite, suggesting that nitrifier denitrification is a source of shallow N2O in this region. Furthermore, decreasing the pH of the incubation water enhanced the amount of N2O produced, suggesting that upwelling of CO2-rich/low-pH deep water may enhance N2O production in this region. Finally, we present our incubation data in the larger context of the N2O and nitrite isotopic and concentration profiles, with an eye toward comparing incubation-based N2O production rates with profile-based estimates.

Ethanol production from glycerol using immobilized Pachysolen tannophilus during microaerated repeated-batch fermentor culture.

PubMed

Cha, Hye-Geun; Kim, Yi-Ok; Choi, Woon Yong; Kang, Do-Hyung; Lee, Hyeon-Yong; Jung, Kyung-Hwan

2015-03-01

Herein, we established a repeated-batch process for ethanol production from glycerol by immobilized Pachysolen tannophilus. The aim of this study was to develop a more practical and applicable ethanol production process for biofuel. In particular, using industrial-grade medium ingredients, the microaeration rate was optimized for maximization of the ethanol production, and the relevant metabolic parameters were then analyzed. The microaeration rate of 0.11 vvm, which is far lower than those occurring in a shaking flask culture, was found to be the optimal value for ethanol production from glycerol. In addition, it was found that, among those tested, Celite was a more appropriate carrier for the immobilization of P. tannophilus to induce production of ethanol from glycerol. Finally, through a repeated-batch culture, the ethanol yield (Ye/g) of 0.126 ± 0.017 g-ethanol/g-glycerol (n = 4) was obtained, and this value was remarkably comparable with a previous report. In the future, it is expected that the results of this study will be applied for the development of a more practical and profitable long-term ethanol production process, thanks to the industrial-grade medium preparation, simple immobilization method, and easy repeated-batch operation.

Coral reef ecosystem decline: changing dynamics of coral reef carbonate production and implications for reef growth potential

NASA Astrophysics Data System (ADS)

Perry, Chris

2016-04-01

Global-scale deteriorations in coral reef health have caused major shifts in species composition and are likely to be exacerbated by climate change. It has been suggested that one effect of these ecological changes will be to lower reef carbonate production rates, which will impair reef growth potential and, ultimately, may lead to states of net reef erosion. However, quantitative data to support such assertions are limited, and linkages between the ecological state of coral reefs and their past and present geomorphic performance (in other words their growth potential) are poorly resolved. Using recently collected data from sites in the Caribbean and Indian Ocean, and which have undergone very different post-disturbance ecological trajectories over the last ~20-30 years, the differential impacts of disturbance on contemporary carbonate production regimes and on reef growth potential can be explored. In the Caribbean, a region which has been severely impacted ecological over the last 30+ years, our datasets show that average carbonate production rates on reefs are now less than 50% of pre-disturbance rates, and that calculated accretion rates (mm yr-1) are an about order of magnitude lower within shallow water habitats compared to Holocene averages. Collectively, these data suggest that recent ecological declines are now propagating through the system to impact on the geomorphic performance of Caribbean reefs and will impair their future growth potential. In contrast, the carbonate budgets of most reefs across the Chagos archipelago (central Indian Ocean), which is geographically remote and largely isolated from direct human disturbances, have recovered rapidly from major past disturbances (specifically the 1998 coral bleaching event). The carbonate budgets on these remote reefs now average +3.7 G (G = kg CaCO3 m-2 yr-1). Most significantly the production rates on Acropora-dominated reefs, which were most severely impacted by the 1998 bleaching event, average +8.4 G, comparable with estimates under pre-human disturbance conditions, and are reflected in high reef growth rates (4.2 mm yr-1). These reefs thus retain the capacity to grow at rates exceeding measured regional mid-late Holocene and 20th century sea-level rise, and close to IPCC sea-level rise projections through to 2100. However, their positive growth potential is strongly tied to the persistence of several key coral species, and thus the frequency and magnitude of future disturbance events will be key determinants of near-future reef growth.

Wheat products as acceptable substitutes for rice.

PubMed

Yu, B H; Kies, C

1993-07-01

The objective of the study was to compare the acceptability to semi-trained US American and Asian palatability panelist, of four wheat products processed to be possible replacers of rice in human diets. Products evaluated using rice as the control standard of excellence were steamed whole wheat, couscous (steamed, extracted wheat flour semolina), rosamarina (rice shaped, extracted wheat flour pasta), and bulgar (steamed, pre-cooked partly debranned, cracked wheat). Using a ten point hedonic rating scale, both groups of panelists gave rosamarina closely followed by couscous, most favorable ratings although these ratings were somewhat lower than that of the positive control, steamed polished rice. Bulgar wheat was given the lowest evaluation and was, in general, found to be an unacceptable replacement for rice by both American and Asian judges because of its dark, 'greasy' color and distinctive flavor. In their personal dietaries, judges included rice from 0.25 to 18 times per week with the Asian judges consuming rice significantly more times per week than did the American judges (10.8 +/- 4.71 vs 1.75 +/- 1.65, p < 0.01). However, rice consumption patterns, nationality, race, or sex of the judges was not demonstrated to affect scoring of the wheat products as rice replacers.

Modulation of mitochondrial metabolism as a biochemical trait in blood feeding organisms: the redox vampire hypothesis redux.

PubMed

Ferreira, Caroline M; Oliveira, Matheus P; Paes, Marcia C; Oliveira, Marcus F

2018-06-01

Hematophagous organisms undergo remarkable metabolic changes during the blood digestion process, increasing fermentative glucose metabolism, and reducing respiratory rates, both consequence of functional mitochondrial remodeling. Here, we review the pathways involved in energy metabolism and mitochondrial functionality in a comparative framework across different hematophagous species, and consider how these processes regulate redox homeostasis during blood digestion. The trend across distinct species indicate that a switch in energy metabolism might represent an important defensive mechanism to avoid the potential harmful interaction of oxidants generated from aerobic energy metabolism with products derived from blood digestion. Indeed, in insect vectors, blood feeding transiently reduces respiratory rates and oxidant production, irrespective of tissue and insect model. On the other hand, a different scenario is observed in several unrelated parasite species when exposed to blood digestion products, as respiratory rates reduce and mitochondrial oxidant production increase. The emerging picture indicates that re-wiring of energy metabolism, through reduced mitochondrial function, culminates in improved tolerance to redox insults and seems to represent a key step for hematophagous organisms to cope with the overwhelming and potentially toxic blood meal. © 2018 International Federation for Cell Biology.

A comparison of memory for and attitudes about alcohol, cigarette, and other product advertisements in college students.

PubMed

Zinser, O; Freeman, J E; Ginnings, D K

1999-01-01

The purpose of this study was to compare the attitude ratings and recall scores of cigarette, alcohol, automobile, deodorant, jeans, soft drink, athletic shoe, breakfast cereal, and fast food restaurant advertisements. Male and female college students rated the advertisements of these product groups on a number of traits--adventurous, eye-catching, appealing, informative, believable, good times, recreational, effectiveness, romantic, athletic, buy product, and honesty. Drawing on their everyday experience, the students also were asked to recall as much about the advertisements from these product groups as they could. The results revealed that the rating and recall scores of the alcohol advertisements were significantly higher than those for the cigarette advertisements and among the highest of all of the advertisement groups. The female recall scores generally were significantly higher than the male recall scores. In contrast to the cigarette advertisements, the high scores of the alcohol advertisements were interpreted to be due in part to the wider distribution alcohol advertising has had. That alcohol advertising ranked among the highest of all of the advertising groups indicates that college students view alcohol advertising very favorably.

Instanton rate constant calculations close to and above the crossover temperature.

PubMed

McConnell, Sean; Kästner, Johannes

2017-11-15

Canonical instanton theory is known to overestimate the rate constant close to a system-dependent crossover temperature and is inapplicable above that temperature. We compare the accuracy of the reaction rate constants calculated using recent semi-classical rate expressions to those from canonical instanton theory. We show that rate constants calculated purely from solving the stability matrix for the action in degrees of freedom orthogonal to the instanton path is not applicable at arbitrarily low temperatures and use two methods to overcome this. Furthermore, as a by-product of the developed methods, we derive a simple correction to canonical instanton theory that can alleviate this known overestimation of rate constants close to the crossover temperature. The combined methods accurately reproduce the rate constants of the canonical theory along the whole temperature range without the spurious overestimation near the crossover temperature. We calculate and compare rate constants on three different reactions: H in the Müller-Brown potential, methylhydroxycarbene → acetaldehyde and H 2  + OH → H + H 2 O. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

The influence of temperature on ozone production under varying NOx conditions - a modelling study

NASA Astrophysics Data System (ADS)

Coates, Jane; Mar, Kathleen A.; Ojha, Narendra; Butler, Tim M.

2016-09-01

Surface ozone is a secondary air pollutant produced during the atmospheric photochemical degradation of emitted volatile organic compounds (VOCs) in the presence of sunlight and nitrogen oxides (NOx). Temperature directly influences ozone production through speeding up the rates of chemical reactions and increasing the emissions of VOCs, such as isoprene, from vegetation. In this study, we used an idealised box model with different chemical mechanisms (Master Chemical Mechanism, MCMv3.2; Common Representative Intermediates, CRIv2; Model for OZone and Related Chemical Tracers, MOZART-4; Regional Acid Deposition Model, RADM2; Carbon Bond Mechanism, CB05) to examine the non-linear relationship between ozone, NOx and temperature, and we compared this to previous observational studies. Under high-NOx conditions, an increase in ozone from 20 to 40 °C of up to 20 ppbv was due to faster reaction rates, while increased isoprene emissions added up to a further 11 ppbv of ozone. The largest inter-mechanism differences were obtained at high temperatures and high-NOx emissions. CB05 and RADM2 simulated more NOx-sensitive chemistry than MCMv3.2, CRIv2 and MOZART-4, which could lead to different mitigation strategies being proposed depending on the chemical mechanism. The increased oxidation rate of emitted VOC with temperature controlled the rate of Ox production; the net influence of peroxy nitrates increased net Ox production per molecule of emitted VOC oxidised. The rate of increase in ozone mixing ratios with temperature from our box model simulations was about half the rate of increase in ozone with temperature observed over central Europe or simulated by a regional chemistry transport model. Modifying the box model set-up to approximate stagnant meteorological conditions increased the rate of increase of ozone with temperature as the accumulation of oxidants enhanced ozone production through the increased production of peroxy radicals from the secondary degradation of emitted VOCs. The box model simulations approximating stagnant conditions and the maximal ozone production chemical regime reproduced the 2 ppbv increase in ozone per degree Celsius from the observational and regional model data over central Europe. The simulated ozone-temperature relationship was more sensitive to mixing than the choice of chemical mechanism. Our analysis suggests that reductions in NOx emissions would be required to offset the additional ozone production due to an increase in temperature in the future.

Radiolytic Hydrogen Production in the Subseafloor Basaltic Aquifer.

PubMed

Dzaugis, Mary E; Spivack, Arthur J; Dunlea, Ann G; Murray, Richard W; D'Hondt, Steven

2016-01-01

Hydrogen (H2) is produced in geological settings by dissociation of water due to radiation from radioactive decay of naturally occurring uranium ((238)U, (235)U), thorium ((232)Th) and potassium ((40)K). To quantify the potential significance of radiolytic H2 as an electron donor for microbes within the South Pacific subseafloor basaltic aquifer, we use radionuclide concentrations of 43 basalt samples from IODP Expedition 329 to calculate radiolytic H2 production rates in basement fractures. The samples are from three sites with very different basement ages and a wide range of alteration types. U, Th, and K concentrations vary by up to an order of magnitude from sample to sample at each site. Comparison of our samples to each other and to the results of previous studies of unaltered East Pacific Rise basalt suggests that significant variations in radionuclide concentrations are due to differences in initial (unaltered basalt) concentrations (which can vary between eruptive events) and post-emplacement alteration. However, there is no clear relationship between alteration type and calculated radiolytic yields. Local maxima in U, Th, and K produce hotspots of H2 production, causing calculated radiolytic rates to differ by up to a factor of 80 from sample to sample. Fracture width also greatly influences H2 production, where microfractures are hotspots for radiolytic H2 production. For example, H2 production rates normalized to water volume are 190 times higher in 1 μm wide fractures than in fractures that are 10 cm wide. To assess the importance of water radiolysis for microbial communities in subseafloor basaltic aquifers, we compare electron transfer rates from radiolysis to rates from iron oxidation in subseafloor basalt. Radiolysis appears likely to be a more important electron donor source than iron oxidation in old (>10 Ma) basement basalt. Radiolytic H2 production in the volume of water adjacent to a square cm of the most radioactive SPG basalt may support as many as 1500 cells.

Price and Availability of Sugar-Free, Sugar-Reduced and Low Glycemic Index Cereal Products in Northwestern México.

PubMed

Arámburo-Gálvez, Jesús G; Ontiveros, Noé; Vergara-Jiménez, Marcela J; Magaña-Ordorica, Dalia; Gracia-Valenzuela, Martina H; Cabrera-Chávez, Francisco

2017-12-18

Sugar-free (SF), sugar-reduced (SR), or low-glycemic-index (low GI) cereal products could be helpful for the dietary treatment of disorders related to glucose homeostasis. However, access and economic aspects are barriers that could hamper their consumption. Thus, the availability and price of such cereal products were evaluated in Northwestern México. The products were categorized in 10 groups. The data were collected in five cities by store visitation (from November 2015 to April 2016). The availability in specialized stores and supermarkets was expressed as availability rates based on the total number of products. The price of the SF, SR, and low GI products were compared with their conventional counterparts. Availability rates were higher in supermarkets than in specialized stores by product numbers (14.29% versus 3.76%, respectively; p < 0.001) and by product categories (53.57% versus 26.92%, respectively; p < 0.001). Five categories of products labeled as SF, SR, and low GI (oats, cookies and crackers, flours, snacks, and tostadas/totopos) had higher prices than their conventional counterparts ( p < 0.05). In conclusion, in Northwestern Mexico, the availability of SF, SR, and low GI cereal-based foods is relatively low, and these foods are more expensive than their conventional counterparts.

Insights into oil cracking based on laboratory experiments

USGS Publications Warehouse

Hill, R.J.; Tang, Y.; Kaplan, I.R.

2003-01-01

The objectives of this pyrolysis investigation were to determine changes in (1) oil composition, (2) gas composition and (3) gas carbon isotope ratios and to compare these results with hydrocarbons in reservoirs. Laboratory cracking of a saturate-rich Devonian oil by confined, dry pyrolysis was performed at T = 350-450??C, P = 650 bars and times ranging from 24 h to 33 days. Increasing thermal stress results in the C15+ hydrocarbon fraction cracking to form C6-14 and C1-5 hydrocarbons and pyrobitumen. The C6-14 fraction continues to crack to C 1-5 gases plus pyrobitumen at higher temperatures and prolonged heating time and the ?? 13Cethane-?? 13Cpropane difference becomes greater as oil cracking progresses. There is considerable overlap in product generation and product cracking. Oil cracking products accumulate either because the rate of generation of any product is greater than the rate of removal by cracking of that product or because the product is a stable end member under the experimental conditions. Oil cracking products decrease when the amount of product generated from a reactant is less than the amount of product cracked. If pyrolysis gas compositions are representative of gases generated from oil cracking in nature, then understanding the processes that alter natural gas composition is critical. ?? 2003 Elsevier Ltd. All rights reserved.

Front-of-pack symbols are not a reliable indicator of products with healthier nutrient profiles.

PubMed

Emrich, Teri E; Qi, Ying; Cohen, Joanna E; Lou, Wendy Y; L'Abbe, Mary L

2015-01-01

Front-of-pack (FOP) nutrition rating systems and symbols are a form of nutrition marketing used on food labels worldwide. In the absence of standardized criteria for their use, it is unclear if FOP symbols are being used to promote products more nutritious than products without symbols. To compare the amount of calories, saturated fat, sodium, and sugar in products with FOP symbols, and different FOP symbol types, to products without symbols. The median calorie, saturated fat, sodium, and sugar content per reference amount of products with FOP symbols were compared to products without FOP symbols using data from the Food Label Information Program, a database of 10,487 Canadian packaged food labels. Ten food categories and 60 subcategories were analyzed. Nutrient content differences were compared using Wilcoxon rank-sum test; differences greater than 25% were deemed nutritionally relevant. Products with FOP symbols were not uniformly lower in calories, saturated fat, sodium, and sugar per reference amount than products without these symbols in any food category and the majority of subcategories (59/60). None of the different FOP types examined were used to market products with overall better nutritional profiles than products without this type of marketing. FOP symbols are being used to market foods that are no more nutritious than foods without this type of marketing. Because FOP symbols may influence consumer perceptions of products and their purchases, it may be a useful public health strategy to set minimum nutritional standards for products using FOP symbol marketing. Copyright © 2014 Elsevier Ltd. All rights reserved.

Depletion of Appalachian coal reserves - how soon?

USGS Publications Warehouse

Milici, R.C.

2000-01-01

Much of the coal consumed in the US since the end of the last century has been produced from the Pennsylvanian strata of the Appalachian basin. Even though quantities mined in the past are less than they are today, this basin yielded from 70% to 80% of the nation's annual coal production from the end of the last century until the early 1970s. During the last 25 years, the proportion of the nation's coal that was produced annually from the Appalachian basin has declined markedly, and today it is only about 40% of the total. The amount of coal produced annually in the Appalachian basin, however, has been rising slowly over the last several decades, and has ranged generally from 400 to 500 million tons (Mt) per year. A large proportion of Appalachian historical production has come from relatively few counties in southwestern Pennsylvania, northern and southern West Virginia, eastern Kentucky, Virginia and Alabama. Many of these counties are decades past their years of peak production and several are almost depleted of economic deposits of coal. Because the current major consumer of Appalachian coal is the electric power industry, coal quality, especially sulfur content, has a great impact on its marketability. High-sulfur coal deposits in western Pennsylvania and Ohio are in low demand when compared with the lower sulfur coals of Virginia and southern West Virginia. Only five counties in the basin that have produced 500 Mt or more exhibit increasing rates of production at relatively high levels. Of these, six are in the central part of the basin and only one, Greene County, Pennsylvania, is in the northern part of the basin. Decline rate models, based on production decline rates and the decline rate of the estimated, 'potential' reserve, indicate that Appalachian basin annual coal production will be 200 Mt or less by the middle of the next century. Published by Elsevier Science B.V.Much of the coal consumed in the US since the end of the last century has been produced from the Pennsylvanian strata of the Appalachian basin. Even though quantities mined in the past are less than they are today, this basin yielded from 70% to 80% of the nation's annual coal production from the end of the last century until the early 1970s. During the last 25 years, the proportion of the nation's coal that was produced annually from the Appalachian basin has declined markedly, and today it is only about 40% of the total. The amount of coal produced annually in the Appalachian basin, however, has been rising slowly over the last several decades, and has ranged generally from 400 to 500 million tons (Mt) per year. A large proportion of Appalachian historical production has come from relatively few counties in southwestern Pennsylvania, northern and southern West Virginia, eastern Kentucky, Virginia and Alabama. Many of these counties are decades past their years of peak production and several are almost depleted of economic deposits of coal. Because the current major consumer of Appalachian coal is the electric power industry, coal quality, especially sulfur content, has a great impact on its marketability. High-sulfur coal deposits in western Pennsylvania and Ohio are in low demand when compared with the lower sulfur coals of Virginia and southern West Virginia. Only five counties in the basin that have produced 500 Mt or more exhibit increasing rates of production at relatively high levels. Of these, six are in the central part of the basin and only one, Greene County, Pennsylvania, is in the northern part of the basin. Decline rate models, based on production decline rates and the decline rate of the estimated, `potential' reserve, indicate that Appalachian basin annual coal production will be 200 Mt or less by the middle of the next century.

Characterization of Clostridium thermocellum strains with disrupted fermentation end product pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Der Veen, Douwe; Lo, Jonathan; Brown, Steven D

2013-01-01

Clostridium thermocellum is a thermophilic, cellulolytic anaerobe that is a candidate microorganism for industrial biofuels production. Strains with mutations in genes associated with production of Llactate ( ldh) and/or acetate ( pta) were characterized to gain insight into the intracellular processes that convert cellobiose to ethanol and other fermentation end products. Cellobiose-grown cultures of the ldh strain had identical biomass accumulation, fermentation end products, transcription profile and intracellular metabolite concentrations compared to its parent strain (DSM1313 hpt spo0A). The pta-deficient strain grew slower and had 30% lower final biomass concentration compared to the parent strain, yet produced 75% more ethanol.more » A ldh pta double mutant strain evolved for faster growth had growth rate and ethanol yield comparable to the parent strain, whereas its biomass accumulation was comparable to pta. Free amino acids were secreted by all examined strains, with both pta strains secreting higher amounts of alanine, valine, isoleucine, proline, glutamine, and threonine. Valine concentration for ldh pta reached 5 mM by the end of growth, or 2.7% of the substrate carbon utilized. These secreted amino acid concentrations correlate with increased intracellular pyruvate concentrations, up to 6-fold in the pta and 16-fold in the ldh pta strain. We hypothesize that the deletions in fermentation end product pathways result in an intracellular redox imbalance, which the organism attempts to relieve, in part by recycling NADP+ through increased production of amino acids.« less

Characterization of Clostridium thermocellum strains with disrupted fermentation end-product pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Der Veen, Douwe; Lo, Jonathan; Brown, Steven D

2013-01-01

Clostridium thermocellum is a thermophilic, cellulolytic anaerobe that is a candidate microorganism for industrial biofuels production. Strains with mutations in genes associated with production of L-lactate (Dldh) and/or acetate (Dpta) were characterized to gain insight into the intracellular processes that convert cellobiose to ethanol and other fermentation end-products. Cellobiose-grown cultures of the Dldh strain had identical biomass accumulation, fermentation end-products, transcription profile, and intracellular metabolite concentrations compared to its parent strain (DSM1313 Dhpt Dspo0A). The Dpta-deficient strain grew slower and had 30 % lower final biomass concentration compared to the parent strain, yet produced 75% more ethanol. A Dldh Dptamore » double-mutant strain evolved for faster growth had a growth rate and ethanol yield comparable to the parent strain, whereas its biomass accumulation was comparable to Dpta. Free amino acids were secreted by all examined strains, with both Dpta strains secreting higher amounts of alanine, valine, isoleucine, proline, glutamine, and threonine. Valine concentration for Dldh Dpta reached 5 mM by the end of growth, or 2.7 % of the substrate carbon utilized. These secreted amino acid concentrations correlate with increased intracellular pyruvate concentrations, up to sixfold in the Dpta and 16-fold in the Dldh Dpta strain. We hypothesize that the deletions in fermentation end-product pathways result in an intracellular redox imbalance, which the organism attempts to relieve, in part by recycling NADP* through increased production of amino acids.« less

Intercomparison of chemical mechanisms for air quality policy formulation and assessment under North American conditions.

PubMed

Derwent, Richard

2017-07-01

The intercomparison of seven chemical mechanisms for their suitability for air quality policy formulation and assessment is described. Box modeling techniques were employed using 44 sets of background environmental conditions covering North America to constrain the chemical development of the longer lived species. The selected mechanisms were modified to enable an unbiased assessment of the adequacy of the parameterizations of photochemical ozone production from volatile organic compound (VOC) oxidation in the presence of NO x . Photochemical ozone production rates responded differently to 30% NO x and VOC reductions with the different mechanisms, despite the striking similarities between the base-case ozone production rates. The 30% reductions in NO x and VOCs also produced changes in OH. The responses in OH to 30% reductions in NO x and VOCs appeared to be more sensitive to mechanism choice, compared with the responses in the photochemical ozone production rates. Although 30% NO x reductions generally led to decreases in OH, 30% reductions in VOCs led to increases in OH, irrespective of mechanism choice and background environmental conditions. The different mechanisms therefore gave different OH responses to NO x and VOC reductions and so would give different responses in terms of changes in the fate and behavior of air toxics, acidification and eutrophication, and fine particle formation compared with others, in response to ozone control strategies. Policymakers need to understand that there are likely to be inherent differences in the responses to ozone control strategies between different mechanisms, depending on background environmental conditions and the extents of NO x and VOC reductions under consideration. The purpose of this paper is to compare predicted ozone responses to NO x and VOC reductions with seven chemical mechanisms under North American conditions. The good agreement found between the tested mechanisms should provide some support for their application in the air quality models used for policymaking.

Sunflower Oil and Nannochloropsis oculata Microalgae as Sources of Unsaturated Fatty Acids for Mitigation of Methane Production and Enhancing Diets' Nutritive Value.

PubMed

Gomaa, Ali S; Kholif, Ahmed E; Kholif, Abdelkader M; Salama, Reda; El-Alamy, Hamza A; Olafadehan, Olurotimi A

2018-02-28

The objective of this assay was to investigate the effect of adding sunflower oil, Nannochloropsis oculata microalgae and their mixture at 0, 1, 2, 3, 4, and 5% to three total mixed rations (TMRs) with different concentrate:forage ratios (40C:60F, 50C:50F, and 60C:40F) on in vitro gas production (GP), methane (CH 4 ) production, and nutrient degradability. Asymptotic GP, GP rate, CH 4 concentration/g acid detergent fiber (ADF), dry matter (DM) degradability (DMD), short chain fatty acids (SCFAs), and ruminal bacteria population increased, but neutral detergent fiber (NDF) degradability (NDFD), ADF degradability (ADFD), and protozoa count decreased with increasing concentrate level in the TMR. Methane production/g DM and NDF was higher for 50C:50F TMR. Sunflower oil reduced asymptotic GP, lag time, CH 4 production/g ADF, ammonia-N (NH 3 -N), and SCFA. Compared to the control treatments, additives decreased GP rate, while sunflower oil/N. oculata mixture increased DMD and NDFD. All additives at 5% increased GP rate and lag time and decreased CH 4 production/g DM, ADF, and NDF, ruminal NH 3 -N, and protozoa count. All additives at 2% increased DMD, NDFD and ADFD, SCFA, and bacteria population. Supplementation of TMR, containing different concentrate:forage ratios, with sunflower oil, N. oculata, and sunflower oil/N. oculata mixture at different doses modified in vitro GP, CH 4 production, and nutrient degradability.

Consumer appeal of nutrition and health claims in three existing product concepts.

PubMed

Verbeke, Wim; Scholderer, Joachim; Lähteenmäki, Liisa

2009-06-01

This paper reports on consumers' reactions towards calcium-enriched fruit juice, omega-3 enriched spread and fibre-enriched cereals, each with a nutrition claim, health claim and reduction of disease risk claim. Cross-sectional data were collected in April 2006 from a sample of 341 consumers in Belgium. Consumers' reactions to the carrier product, functional ingredient and claim combinations were assessed as perceived convincingness of the claim, credibility of the product, attractiveness of the product, and intention to buy the product, while accounting for differences in product familiarity, attitudinal and demographic characteristics. Generally, health claims outperformed nutrition claims, and both of these claim types outperformed reduction of disease risk claims. Comparing consumer reactions across product concepts revealed clear preferences for fibre-enriched cereals as compared to the other two concepts. The interaction effects between claim type and product concept indicated that reduction of disease risk claims are perceived very well in omega-3 enriched spreads, particularly in terms of perceived convincingness of the claim, while not appealing to consumers in the other product concepts. Positive attitudes towards functional foods and familiarity with the concrete functional product category boosted the claim type and product ratings, whereas perceived control over own health and perceiving functional foods as a marketing scam decreased all product concept's appeal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cibin, Raj; Trybula, Elizabeth; Chaubey, Indrajeet

Cellulosic bioenergy feedstock such as perennial grasses and crop residues are expected to play a significant role in meeting US biofuel production targets. Here, we used an improved version of the Soil and Water Assessment Tool (SWAT) to forecast impacts on watershed hydrology and water quality by implementing an array of plausible land-use changes associated with commercial bioenergy crop production for two watersheds in the Midwest USA. Watershed-scale impacts were estimated for 13 bioenergy crop production scenarios, including: production of Miscanthus 9 giganteus and upland Shawnee switchgrass on highly erodible landscape positions, agricultural marginal land areas and pastures, removal ofmore » corn stover and combinations of these options. We also measured water quality as erosion and sediment loading; this was forecasted to improve compared to baseline when perennial grasses were used for bioenergy production, but not with stover removal scenarios. Erosion reduction with perennial energy crop production scenarios ranged between 0.2% and 59%. Stream flow at the watershed outlet was reduced between 0 and 8% across these bioenergy crop production scenarios compared to baseline across the study watersheds. Our results indicate that bioenergy production scenarios that incorporate perennial grasses reduced the nonpoint source pollutant load at the watershed outlet compared to the baseline conditions (0–20% for nitrate-nitrogen and 3–56% for mineral phosphorus); but, the reduction rates were specific to site characteristics and management practices.« less

Shielding experiments by the JASMIN Collaboration at Fermilab (II) - radioactivity measurement induced by secondary particles from the anti-proton production target

DOE PAGES

Hiroshi, Yashima; Norihiro, Matsuda; Yoshimi, Kasugai; ...

2011-08-01

The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting of an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10 12 protons per second. The samples of Al, Nb, Cu, and Au were placed near the target to investigate the spatial and energy distribution of secondary particles emitted from it. After irradiation, the induced activities of the samples were measuredmore » by studying their gamma ray spectra using HPGe detectors. The production rates of 30 nuclides induced in Al, Nb, Cu, Au samples were obtained. These rates increase for samples placed in a forward (small angle) position relative to the target. The angular dependence of these reaction rates becomes larger for increasing threshold energy. These experimental results are compared with Monte Carlo calculations. The calculated results generally agree with the experimental results to within a factor of 2 to 3.« less

Shielding experiments by the JASMIN collaboration at Fermilab (II) - Radioactivity measurement induced by secondary particles from the anti-proton production target

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yashima, Hiroshi; /Kyoto U., KURRI; Matsuda, Norihiro

2011-01-01

The JASMIN Collaboration has performed an experiment to conduct measurements of nuclear reaction rates around the anti-proton production (Pbar) target at the Fermi National Accelerator Laboratory (FNAL). At the Pbar target station, the target, consisting an Inconel 600 cylinder, was irradiated by a 120 GeV/c proton beam from the FNAL Main Injector. The beam intensity was 3.6 x 10{sub 12} protons per second. Samples of Al, Nb, Cu, and Au were placed near the target to investigate the spatial and energy distribution of secondary particles emitted from it. After irradiation, the induced activities of the samples were measured by studyingmore » their gamma ray spectra using HPGe detectors. The production rates of 30 nuclides induced in Al, Nb, Cu, Au samples were obtained. These rates increase for samples placed in a forward (small angle) position relative to the target. The angular dependence of these reaction rates becomes larger for increasing threshold energy. These experimental results are compared with Monte Carlo calculations. The calculated results generally agree with the experimental results to within a factor of 2 to 3.« less

Evaluation of software sensors for on-line estimation of culture conditions in an Escherichia coli cultivation expressing a recombinant protein.

PubMed

Warth, Benedikt; Rajkai, György; Mandenius, Carl-Fredrik

2010-05-03

Software sensors for monitoring and on-line estimation of critical bioprocess variables have mainly been used with standard bioreactor sensors, such as electrodes and gas analyzers, where algorithms in the software model have generated the desired state variables. In this article we propose that other on-line instruments, such as NIR probes and on-line HPLC, should be used to make more reliable and flexible software sensors. Five software sensor architectures were compared and evaluated: (1) biomass concentration from an on-line NIR probe, (2) biomass concentration from titrant addition, (3) specific growth rate from titrant addition, (4) specific growth rate from the NIR probe, and (5) specific substrate uptake rate and by-product rate from on-line HPLC and NIR probe signals. The software sensors were demonstrated on an Escherichia coli cultivation expressing a recombinant protein, green fluorescent protein (GFP), but the results could be extrapolated to other production organisms and product proteins. We conclude that well-maintained on-line instrumentation (hardware sensors) can increase the potential of software sensors. This would also strongly support the intentions with process analytical technology and quality-by-design concepts. 2010 Elsevier B.V. All rights reserved.

Productivity and safety in worker cooperatives and conventional firms.

PubMed

Grunberg, L; Everard, J; O'Toole, M

1984-01-01

This paper examines the relationship between productivity and workers' safety in firms characterized by very different types of relations in production. Arguments are developed to explain why worker cooperatives are expected to have higher productivity and lower accident rates than conventional capitalist firms. Workers who own and control their firms are expected to have a greater incentive to be efficient and a greater ability to safeguard their health than workers employed under hierarchical and alienating conditions. The hypotheses are tested by comparing carefully matched conventional and cooperative plywood companies. Preliminary results suggest that while cooperatives may be more productive they are not safer, indicating the limits of the isolated cooperative form in capitalist market economies.

Annotated bibliography and index map of sulfur and pyrites deposits in the United States and Alaska (including references to July 1, 1951)

USGS Publications Warehouse

Espenshade, Gilbert H.; Broedel, Carl H.

1952-01-01

Since the end of World War II, the pattern of sulfur production and consumption in the United States and abroad has changed markedly from the pattern that existed before the war. Although production of sulfur in the United States in 1950 was more than double the average annual production for the 1935-39 period, consumption had increased at such a rate that current domestic and foreign demand for U. S. sulfur exceeds the productive capacity of the industry. Production of sulfur (including brimstone, pyrites, and all other forms) in the 1935-39 period and in 1950 are compared in the table below.

Schwinger mechanism in the SU(3) Nambu-Jona-Lasinio model with an electric field

NASA Astrophysics Data System (ADS)

Tavares, William R.; Avancini, Sidney S.

2018-05-01

In this work we study the electrized quark matter under finite temperature and density conditions in the context of the SU(2) and SU(3) Nambu-Jona-Lasinio models. To this end, we evaluate the effective quark masses and the Schwinger quark-antiquark pair production rate. For the SU(3) NJL model we incorporate in the Lagrangian the 't Hooft determinant and we present a set of analytical expressions more convenient for numerical evaluations. We predict a decrease of the pseudocritical electric field with the increase of the temperature for both models and a more prominent production rate for the SU(3) model when compared to the SU(2).

A Study of Two-Equation Turbulence Models on the Elliptic Streamline Flow

NASA Technical Reports Server (NTRS)

Blaisdell, Gregory A.; Qin, Jim H.; Shariff, Karim; Rai, Man Mohan (Technical Monitor)

1995-01-01

Several two-equation turbulence models are compared to data from direct numerical simulations (DNS) of the homogeneous elliptic streamline flow, which combines rotation and strain. The models considered include standard two-equation models and models with corrections for rotational effects. Most of the rotational corrections modify the dissipation rate equation to account for the reduced dissipation rate in rotating turbulent flows, however, the DNS data shows that the production term in the turbulent kinetic energy equation is not modeled correctly by these models. Nonlinear relations for the Reynolds stresses are considered as a means of modifying the production term. Implications for the modeling of turbulent vortices will be discussed.

Effects of coffee management on deforestation rates and forest integrity.

PubMed

Hylander, Kristoffer; Nemomissa, Sileshi; Delrue, Josefien; Enkosa, Woldeyohannes

2013-10-01

Knowledge about how forest margins are utilized can be crucial for a general understanding of changes in forest cover, forest structure, and biodiversity across landscapes. We studied forest-agriculture transitions in southwestern Ethiopia and hypothesized that the presence of coffee (Coffea arabica)decreases deforestation rates because of coffee's importance to local economies and its widespread occurrence in forests and forest margins. Using satellite images and elevation data, we compared changes in forest cover over 37 years (1973-2010) across elevations in 2 forest-agriculture mosaic landscapes (1100 km(2) around Bonga and 3000 km(2) in Goma-Gera). In the field in the Bonga area, we determined coffee cover and forest structure in 40 forest margins that differed in time since deforestation. Both the absolute and relative deforestation rates were lower at coffee-growing elevations compared with at higher elevations (-10/20% vs. -40/50% comparing relative rates at 1800 m asl and 2300-2500 m asl, respectively). Within the coffee-growing elevation, the proportion of sites with high coffee cover (>20%) was significantly higher in stable margins (42% of sites that had been in the same location for the entire period) than in recently changed margins (0% of sites where expansion of annual crops had changed the margin). Disturbance level and forest structure did not differ between sites with 30% or 3% coffee. However, a growing body of literature on gradients of coffee management in Ethiopia reports coffee's negative effects on abundances of forest-specialist species. Even if the presence of coffee slows down the conversion of forest to annual-crop agriculture, there is a risk that an intensification of coffee management will still threaten forest biodiversity, including the genetic diversity of wild coffee. Conservation policy for Ethiopian forests thus needs to develop strategies that acknowledge that forests without coffee production may have higher deforestation risks than forests with coffee production and that forests with coffee production often have lower biodiversity value. © 2013 Society for Conservation Biology.

Predicting the Effects of Coastal Hypoxia on Vital Rates of the Planktonic Copepod Acartia tonsa Dana

PubMed Central

Elliott, David T.; Pierson, James J.; Roman, Michael R.

2013-01-01

We describe a model predicting the effects of low environmental oxygen on vital rates (egg production, somatic growth, and mortality) of the coastal planktonic copepod Acartia tonsa. Hypoxic conditions can result in respiration rate being directly limited by oxygen availability. We hypothesized that A. tonsa egg production, somatic growth, and ingestion rates would all respond in a similar manner to low oxygen conditions, as a result of oxygen dependent changes in respiration rate. Rate data for A. tonsa egg production, somatic growth, and ingestion under low environmental oxygen were compiled from the literature and from supplementary experiments. The response of these rates to oxygen was compared by converting all to the analogous units in terms of oxygen utilization, which we termed analogous respiration rate. These analogous respiration rates, along with published measurements of respiration rates, were used to parameterize and evaluate the relationship between A. tonsa respiration rate and environmental oxygen. At 18°C, our results suggest that A. tonsa experiences sub-lethal effects of hypoxia below an oxygen partial pressure of 8.1 kPa (∼3.1 mg L−1 = 2.3 mL L−1). The results of this study can be used to predict the effects of hypoxia on A. tonsa growth and mortality as related to environmental temperature and oxygen partial pressure. Such predictions will be useful as a way to incorporate the effects of coastal hypoxia into population, community, or ecosystem level models that include A. tonsa. This approach can also be used to characterize the effects of hypoxia on other aquatic organisms. PMID:23691134

Algorithm and assessment work of active fire detection based on FengYun-3C/VIRR

NASA Astrophysics Data System (ADS)

Lin, Z.; Chen, F.

2017-12-01

The wildfire is one of the most destructive and uncontrollable disasters and causes huge environmental, ecological, social effects. To better serve scientific research and practical fire management, an algorithm and corresponding validation work of active fire detection based on FengYun-3C/VIRR data, which is an optical sensor onboard the Chinese polar-orbiting meteorological sun-synchronous satellite, is hereby introduced. While the main structure heritages the `contextual algorithm', some new concepts including `infrared channel slope' are introduced for better adaptions to different situations. The validation work contains three parts: 1) comparing with the current FengYun-3C fire product GFR; 2) comparing with MODIS fire products; 3) comparing with Landsat series data. Study areas are selected from different places all over the world from 2014 to 2016. The results showed great improvement on GFR files on accuracy of both positioning and detection rate. In most study areas, the results match well with MODIS products and Landsat series data (with over 85% match degree) despite the differences in imaging time. However, detection rates and match degrees in Africa and South-east Asia are not satisfied (around 70%), where the occurrences of numerous small fire events and corresponding smokes may strongly affect the results of the algorithm. This is our future research direction and one of the main improvements requires achieving.

Production of a pseudoscalar Higgs boson with a Z boson from gluon fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kao, C.

1992-12-01

The minimal supersymmetric model is adopted to study the production of a pseudoscalar Higgs boson ({ital A}) in association with a {ital Z} gauge boson from gluon fusion ({ital gg}{r arrow}{ital ZA}) at future hadron supercolliders. Its production rate is determined and compared to that of the associated production of the standard model Higgs boson ({ital H}{sub SM}) with a {ital Z} boson from quark-antiquark annihilation ({ital q{bar q}}{r arrow}{ital ZH}{sub SM}) and gluon fusion ({ital gg}{r arrow}{ital ZH}{sub SM}). Some promising decay modes are suggested for detection.

Impact of glycerol and nitrogen concentration on Enterobacter A47 growth and exopolysaccharide production.

PubMed

Torres, Cristiana A V; Marques, Rodolfo; Ferreira, Ana R V; Antunes, Sílvia; Grandfils, Christian; Freitas, Filomena; Reis, Maria A M

2014-11-01

Enterobacter A47 produces a fucose-containing exopolysaccharide (EPS) by cultivation in mineral medium supplemented with glycerol. EPS synthesis by Enterobacter A47 was shown to be influenced by both the initial glycerol and nitrogen concentrations and by the nutrients' feeding rate during the fed-batch phase. Initial nitrogen concentrations above 1.05g/L were detrimental for EPS synthesis: the productivity was reduced to 0.35-0.62g/Ld (compared to 1.89-2.04g/Ld under lower nitrogen concentrations) and the polymer had lower fucose content (14-17%mol, compared to 36-38%mol under lower nitrogen concentrations). On the other hand, EPS productivity was improved to 5.66g/Ld by increasing the glycerol and nitrogen feeding rates during the fed-batch phase. However, the EPS thus obtained had lower fucose (26%mol) and higher galactose (34%mol) contents, as well as lower average molecular weight (7.2×10(5)). The ability of Enterobacter A47 to synthesize EPS with different physico-chemical characteristics may be useful for the generation of biopolymers with distinct functional properties suitable for different applications. Copyright © 2014 Elsevier B.V. All rights reserved.

Establishment of a medium-scale mosquito facility: tests on mass production cages for Aedes albopictus (Diptera: Culicidae).

PubMed

Zhang, Dongjing; Li, Yongjun; Sun, Qiang; Zheng, Xiaoying; Gilles, Jeremie R L; Yamada, Hanano; Wu, Zhongdao; Xi, Zhiyong; Wu, Yu

2018-03-19

Mass egg production is an important component of Aedes albopictus mosquito control programs, such as the sterile insect technique and incompatible insect technique, which requires the releases of large number of sterile males. Developing standard operating procedures and optimized cages for adult maintenance of Ae. albopictus can improve the mass rearing efficiency. Three different sex ratios of females to males with a total number of 4,000 mosquitoes were tested by evaluating the insemination rate, egg production (total number of eggs per cage), female fecundity and egg hatch rate in small cage (30 × 30 × 30 cm). Blood meals with adenosine triphosphate (ATP, 0.05 g/ml), cage structures (Big cage A: 90 × 30 × 30 cm; Big cage B: 90 × 30 × 50 cm or 90 × 50 × 30 cm) and rearing densities (12,000, 16,000 and 20,000 mosquitoes, corresponding to 0.9 cm 2 /mosquito, 0.675 cm 2 /mosquito and 0.54 cm 2 /mosquito, respectively) were also tested and evaluated on the basis of egg production, female fecundity and egg hatch rate. An adult rearing unit holding 15 of Big cage A with optimal egg production was designed to produce 10 million eggs per rearing cycle in a 1.8 m 2 space. Female to male ratios at 3:1 in small cages resulted in higher egg production but did not affect insemination rate, female fecundity and egg hatch rate. A concentration of 0.05 g/ml of ATP added to blood meals improved the blood-feeding frequency and thus increased the overall egg production per cage. Cage structures affected the egg production per cage, but not egg hatch rate. A medium rearing density at 0.675 cm 2 /mosquito (16,000 mosquitoes) resulted in higher egg production compared to both low and high densities. An adult rearing unit for Ae. albopictus on the basis of Big cage A has been developed with the capacity of producing 10 million eggs within 15 days. Our results have indicated that the adult rearing methods and adult maintenance unit are recommended for Ae. albopictus mass rearing in support of the establishment of a medium-sized mosquito factory.

Control of C/N ratio for butyric acid production from textile wastewater sludge by anaerobic digestion.

PubMed

Fu, Bo; Zhang, Jingjing; Fan, Jinfeng; Wang, Jin; Liu, He

2012-01-01

Increasing textile wastewaters and their biotreatment byproduct-waste activated sludge are serious pollution problems. Butyric acid production from textile wastewater sludge by anaerobic digestion at different C/N ratios was investigated. Adding starch to textile wastewater sludge with a C/N ratio of 30 increased the butyric acid concentration and percentage accounting for total volatile fatty acids (TVFAs) to 21.42 g/L and 81.5%, respectively, as compared with 21.42 g/L and 10.6% of textile wastewater sludge alone. The maximum butyric acid yield (0.45 g/g VS), conversion rate (0.74 g/g VS(digest)) and production rate (2.25 g/L d) was achieved at a C/N ratio of 30. The biological toxicity of textile wastewater sludge also significantly decreased after the anaerobic digestion. The study indicated that the anaerobic co-digestion of textile wastewater sludge and carbohydrate-rich waste with appropriate C/N ratio is possible for butyric acid production.

Design of a new integrated chitosan-PAMAM dendrimer biosorbent for heavy metals removing and study of its adsorption kinetics and thermodynamics.

PubMed

Zarghami, Zabihullah; Akbari, Ahmad; Latifi, Ali Mohammad; Amani, Mohammad Ali

2016-04-01

In this research, different generations of PAMAM-grafted chitosan as integrated biosorbents were successfully synthesized via step by step divergent growth approach of dendrimer. The synthesized products were utilized as adsorbents for heavy metals (Pb(2+) in this study) removing from aqueous solution and their reactive Pb(2+) removal potential was evaluated. The results showed that as-synthesized products with higher generations of dendrimer, have more adsorption capacity compared to products with lower generations of dendrimer and sole chitosan. Adsorption capacity of as-prepared product with generation 3 of dendrimer is 18times more than sole chitosan. Thermodynamic and kinetic studies were performed for understanding equilibrium data of the uptake capacity and kinetic rate uptake, respectively. Thermodynamic and kinetic studies showed that Langmuir isotherm model and pseudo second order kinetic model are more compatible for describing equilibrium data of the uptake capacity and kinetic rate of the Pb(2+) uptake, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

Chemical stability of insulin. 2. Formation of higher molecular weight transformation products during storage of pharmaceutical preparations.

PubMed

Brange, J; Havelund, S; Hougaard, P

1992-06-01

Formation of covalent, higher molecular weight transformation (HMWT) products during storage of insulin preparations at 4-45 degrees C was studied by size exclusion chromatography. The main products are covalent insulin dimers (CID), but in protamine-containing preparations the concurrent formation of covalent insulin-protamine (CIP) products takes place. At temperatures greater than or equal to 25 degrees C parallel or consecutive formation of covalent oligo- and polymers can also be observed. Rate of HMWT is only slightly influenced by species of insulin but varies with composition and formulation, and for isophane (NPH) preparations, also with the strength of preparation. Temperature has a pronounced effect on CID, CIP, and, especially, covalent oligo- and polymer formation. The CIDs are apparently formed between molecules within the hexameric unit common for all types of preparations and rate of formation is generally faster in glycerol-containing preparations. Compared with insulin hydrolysis reactions (see the preceding paper), HMWT is one order of magnitude slower, except for NPH preparations.

Impact of Mated Female Nonproductive Days in Breeding Herd after Porcine Epidemic Diarrhea Virus Outbreak.

PubMed

Lin, Jung-Da; Lin, Chuen-Fu; Chung, Wen-Bin; Chiou, Ming-Tang; Lin, Chao-Nan

2016-01-01

Porcine epidemic diarrhea virus (PEDV) is an important pathogen that has a significant economic impact on the swine industry by imposing a high rate of mortality in suckling piglets. However, limited information on the productivity values of gilts and sows infected with PEDV is available. Here, we evaluate the productivity index in gilts and sows during the 1-year period before (19 January 2013 to 18 January 2014) and after (19 January 2014 to 18 January 2015) a PEDV outbreak from a 2000-sow breeding herd in Taiwan. The farrowing rate (FR), return rate (RR), total pigs born per litter (TB), pigs born alive per litter (BA), weaning pigs per litter (WPL), pre-weaning mortality, percentage of sows mated by 7 days after weaning, weaning to first service interval (WFSI), mated female nonproductive days (NPDs), replacement rate of sows and sow culling rate were compared using productive records. The FR (-9.6%), RR (+9.8%), TB (-1.6), BA (-1.1), WPL (-1.1), sows mated by 7 days after weaning (-6.9%), WFSI (+0.8 days), NPDs (+6.9 days) and sow culling rate (+7.2%) were significantly different between the 1-year pre-PEDV outbreak period and the post-PEDV outbreak period. Impacts of the PEDV infection on the reproductive performance were more severe in pregnant gilts than in sows. In conclusion, these findings indicate that the outbreak of PEDV caused an increase in the rate of NPDs in breeding herds.

Denitrification: an important pathway for nitrous oxide production in tropical mangrove sediments (Goa, India).

PubMed

Fernandes, Sheryl Oliveira; Bharathi, P A Loka; Bonin, Patricia C; Michotey, Valérie D

2010-01-01

Net nitrous oxide production and denitrification activity were measured in two mangrove ecosystems of Goa, India. The relatively pristine site Tuvem was compared to Divar, which is prone to high nutrient input. Stratified sampling at 2-cm intervals within the 0- to 10-cm depth range showed that N2O production at both the locations decreased with depth. Elevated denitrification activity at Divar resulted in maximum production of up to 1.95 nmol N2O-N g(-1) h(-1) at 2 to 4 cm, which was three times higher than at Tuvem. Detailed investigations to understand the major pathway contributing to N2O production performed at Tuvem showed that incomplete denitrification was responsible for up to 43 to 93% of N2O production. Nitrous oxide production rates closely correlated to nitrite concentration (n = 15; r = -0.47; p < 0.05) and denitrifier abundance (r = 0.55; p < 0.05), suggesting that nitrite utilization by microbial activity leads to N2O production. Nitrous oxide production through nitrification was below detection, affirming that denitrification is the major pathway responsible for production of the greenhouse gas. Net N2O production in these mangrove systems are comparatively higher than those reported from other natural estuarine sediments and therefore warrant mitigation measures.

Microbial oxidation of gaseous hydrocarbons: production of methylketones from corresponding n-alkanes by methane-utilizing bacteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patel, R.N.; Hou, C.T.; Laskin, A.I.

Cell suspensions of methane-utilizing bacteria grown on methane oxidized n-alkanes (propane, butane, pentane, hexane) to their corresponding methylketones (acetone, 2-butanone, 2-pentanone, 2-hexanone). The product methylketones accumulated extracellularly. The rate of production of methylketones varied with the organism used for oxidation; however, the average rate of acetone, 2-butanone, 2-pentanone, and 2-hexanone production was 1.2, 1.0, 0.15, and 0.025 ..mu..mol/h per 5.0 mg of protein in cell suspensions. Primary alcohols and aldehydes were also detected in low amounts as products of n-alkane (propane and butane) oxidation, but were rapidly metabolized further by cell suspensions. The optimal conditions for in vivo methylketone formationmore » from n-alkanes were compared in Methylococcus capsulatus (Texas strain), Methylosinus sp. (CRL-15), and Methylobacterium sp. (CRL-26). The rate of acetone and 2-butanone production was linear for the first 60 min of incubation and directly increased with cell concentration up to 10 mg of protein per ml for all three cultures tested. The optimal temperatures for the production of acetone and 2-butanone were 35/sup 0/C for Methylosinus trichosporium sp. (CRL-15) and Methylobacterium sp. (CRL-26) and 40/sup 0/C for Methylococcus capsulatus (Texas). Metal-chelating agents inhibited the production of methylketones, suggesting the involvement of a metal-containing enzymatic system in the oxidation of n-alkanes to the corresponding methylketones. The soluble crude extracts derived from methane-utilizing bacteria contained an oxidized nicotinamide adenine dinucleotide-dependent dehydrogenase which catalyzed the oxidation of secondary alcohols.« less

Teaching children about good health? Halo effects in child-directed advertisements for unhealthy food.

PubMed

Harris, J L; Haraghey, K S; Lodolce, M; Semenza, N L

2018-04-01

Food companies often use healthy lifestyle messages in child-directed advertising, raising public health concerns about health halo effects for nutrient-poor food/drinks. Examine effects of health messages promoting nutrient-poor foods in child-directed advertising. Randomized controlled experiment (N = 138). Children (7-11 years) viewed three child-friendly commercials in one of three conditions: (1) health halo (unfamiliar nutrient-poor food/drink ads with healthy messages); (2) nutrient-poor food/drink ads with other messages and (3) healthy food/drink ads. They rated the commercials and advertised products, provided attitudes about exercise and nutrition and consumed and rated healthy and unhealthy snack foods. Children in the health halo condition rated the advertised nutrient-poor products as significantly healthier compared with children in other conditions (p = .003), but the other commercials did not affect children's attitudes about other advertised products (p's > .50). Child age, gender or TV viewing habits did not significantly predict their ratings (p's > .18). There was no evidence that healthy lifestyle messages and/or healthy food commercials improved children's attitudes about nutrition, exercise or healthy snack consumption. Promoting healthy lifestyle messages in child-directed commercials for nutrient-poor food/drinks likely benefits brands by increasing products' perceived healthfulness, but these ads are unlikely to positively affect children's attitudes about health and nutrition. © 2017 World Obesity Federation.

Profound Effects of Population Density on Fitness-Related Traits in an Invasive Freshwater Snail

PubMed Central

Zachar, Nicholas; Neiman, Maurine

2013-01-01

Population density can profoundly influence fitness-related traits and population dynamics, and density dependence plays a key role in many prominent ecological and evolutionary hypotheses. Here, we evaluated how individual-level changes in population density affect growth rate and embryo production early in reproductive maturity in two different asexual lineages of Potamopyrgus antipodarum, a New Zealand freshwater snail that is an important model system for ecotoxicology and the evolution of sexual reproduction as well as a potentially destructive worldwide invader. We showed that population density had a major influence on individual growth rate and early-maturity embryo production, effects that were often apparent even when comparing treatments that differed in population density by only one individual. While individual growth rate generally decreased as population density increased, we detected a hump-shaped relationship between embryo production and density, with females from intermediate-density treatments producing the most embryos and females from low- and high-density treatments producing the fewest embryos. The two lineages responded similarly to the treatments, indicating that these effects of population density might apply more broadly across P. antipodarum. These results indicate that there are profound and complex relationships between population density, growth rate, and early-maturity embryo production in at least two lineages of this important model system, with potential implications for the study of invasive populations, research on the maintenance of sex, and approaches used in ecotoxicology. PMID:24278240

Profound effects of population density on fitness-related traits in an invasive freshwater snail.

PubMed

Zachar, Nicholas; Neiman, Maurine

2013-01-01

Population density can profoundly influence fitness-related traits and population dynamics, and density dependence plays a key role in many prominent ecological and evolutionary hypotheses. Here, we evaluated how individual-level changes in population density affect growth rate and embryo production early in reproductive maturity in two different asexual lineages of Potamopyrgus antipodarum, a New Zealand freshwater snail that is an important model system for ecotoxicology and the evolution of sexual reproduction as well as a potentially destructive worldwide invader. We showed that population density had a major influence on individual growth rate and early-maturity embryo production, effects that were often apparent even when comparing treatments that differed in population density by only one individual. While individual growth rate generally decreased as population density increased, we detected a hump-shaped relationship between embryo production and density, with females from intermediate-density treatments producing the most embryos and females from low- and high-density treatments producing the fewest embryos. The two lineages responded similarly to the treatments, indicating that these effects of population density might apply more broadly across P. antipodarum. These results indicate that there are profound and complex relationships between population density, growth rate, and early-maturity embryo production in at least two lineages of this important model system, with potential implications for the study of invasive populations, research on the maintenance of sex, and approaches used in ecotoxicology.

Tree Productivity Enhanced with Conversion from Forest to Urban Land Covers.

PubMed

Briber, Brittain M; Hutyra, Lucy R; Reinmann, Andrew B; Raciti, Steve M; Dearborn, Victoria K; Holden, Christopher E; Dunn, Allison L

2015-01-01

Urban areas are expanding, changing the structure and productivity of landscapes. While some urban areas have been shown to hold substantial biomass, the productivity of these systems is largely unknown. We assessed how conversion from forest to urban land uses affected both biomass structure and productivity across eastern Massachusetts. We found that urban land uses held less than half the biomass of adjacent forest expanses with a plot level mean biomass density of 33.5 ± 8.0 Mg C ha(-1). As the intensity of urban development increased, the canopy cover, stem density, and biomass decreased. Analysis of Quercus rubra tree cores showed that tree-level basal area increment nearly doubled following development, increasing from 17.1 ± 3.0 to 35.8 ± 4.7 cm(2) yr(-1). Scaling the observed stem densities and growth rates within developed areas suggests an aboveground biomass growth rate of 1.8 ± 0.4 Mg C ha(-1) yr(-1), a growth rate comparable to nearby, intact forests. The contrasting high growth rates and lower biomass pools within urban areas suggest a highly dynamic ecosystem with rapid turnover. As global urban extent continues to grow, cities consider climate mitigation options, and as the verification of net greenhouse gas emissions emerges as critical for policy, quantifying the role of urban vegetation in regional-to-global carbon budgets will become ever more important.

Zero-Point Energy Constraint for Unimolecular Dissociation Reactions. Giving Trajectories Multiple Chances To Dissociate Correctly.

PubMed

Paul, Amit K; Hase, William L

2016-01-28

A zero-point energy (ZPE) constraint model is proposed for classical trajectory simulations of unimolecular decomposition and applied to CH4* → H + CH3 decomposition. With this model trajectories are not allowed to dissociate unless they have ZPE in the CH3 product. If not, they are returned to the CH4* region of phase space and, if necessary, given additional opportunities to dissociate with ZPE. The lifetime for dissociation of an individual trajectory is the time it takes to dissociate with ZPE in CH3, including multiple possible returns to CH4*. With this ZPE constraint the dissociation of CH4* is exponential in time as expected for intrinsic RRKM dynamics and the resulting rate constant is in good agreement with the harmonic quantum value of RRKM theory. In contrast, a model that discards trajectories without ZPE in the reaction products gives a CH4* → H + CH3 rate constant that agrees with the classical and not quantum RRKM value. The rate constant for the purely classical simulation indicates that anharmonicity may be important and the rate constant from the ZPE constrained classical trajectory simulation may not represent the complete anharmonicity of the RRKM quantum dynamics. The ZPE constraint model proposed here is compared with previous models for restricting ZPE flow in intramolecular dynamics, and connecting product and reactant/product quantum energy levels in chemical dynamics simulations.

Tree Productivity Enhanced with Conversion from Forest to Urban Land Covers

PubMed Central

Briber, Brittain M.; Hutyra, Lucy R.; Reinmann, Andrew B.; Raciti, Steve M.; Dearborn, Victoria K.; Holden, Christopher E.; Dunn, Allison L.

2015-01-01

Urban areas are expanding, changing the structure and productivity of landscapes. While some urban areas have been shown to hold substantial biomass, the productivity of these systems is largely unknown. We assessed how conversion from forest to urban land uses affected both biomass structure and productivity across eastern Massachusetts. We found that urban land uses held less than half the biomass of adjacent forest expanses with a plot level mean biomass density of 33.5 ± 8.0 Mg C ha-1. As the intensity of urban development increased, the canopy cover, stem density, and biomass decreased. Analysis of Quercus rubra tree cores showed that tree-level basal area increment nearly doubled following development, increasing from 17.1 ± 3.0 to 35.8 ± 4.7 cm2 yr-1. Scaling the observed stem densities and growth rates within developed areas suggests an aboveground biomass growth rate of 1.8 ± 0.4 Mg C ha-1 yr-1, a growth rate comparable to nearby, intact forests. The contrasting high growth rates and lower biomass pools within urban areas suggest a highly dynamic ecosystem with rapid turnover. As global urban extent continues to grow, cities consider climate mitigation options, and as the verification of net greenhouse gas emissions emerges as critical for policy, quantifying the role of urban vegetation in regional-to-global carbon budgets will become ever more important. PMID:26302444

Aligning clinical compensation with clinical productivity: design and implementation of the financial value unit (FVU) system in an academic department of internal medicine.

PubMed

Stites, Steven; Steffen, Patrick; Turner, Scott; Pingleton, Susan

2013-07-01

A new metric was developed and implemented at the University of Kansas School of Medicine Department of Internal Medicine, the financial value unit (FVU). This metric analyzes faculty clinical compensation compared with clinical work productivity as a transparent means to decrease the physician compensation variability and compensate faculty equitably for clinical work.The FVU is the ratio of individual faculty clinical compensation compared with their total work relative value units (wRVUs) generated divided by Medical Group Management Association (MGMA) salary to wRVUs of a similar MGMA physician.The closer the FVU ratio is to 1.0, the closer clinical compensation is to that of an MGMA physician with similar clinical productivity. Using FVU metrics to calculate a faculty salary gap compared with MGMA median salary and wRVU productivity, a divisional production payment was established annually.From FY 2006 to FY 2011, both total faculty numbers and overall clinical activity increased. With the implementation of the FVU, both clinical productivity and compensation increased while, at the same time, physician retention rates remained high. Variability in physician compensation decreased. Dramatic clinical growth was associated with the alignment of clinical work and clinical compensation in a transparent and equable process.

Engineered heat treated methanogenic granules: a promising biotechnological approach for extreme thermophilic biohydrogen production.

PubMed

Abreu, Angela A; Alves, Joana I; Pereira, M Alcina; Karakashev, Dimitar; Alves, M Madalena; Angelidaki, Irini

2010-12-01

In the present study, two granular systems were compared in terms of hydrogen production rate, stability and bacterial diversity under extreme thermophilic conditions (70 degrees C). Two EGSB reactors were individually inoculated with heat treated methanogenic granules (HTG) and HTG amended with enrichment culture with high capacity of hydrogen production (engineered heat treated methanogenic granules - EHTG), respectively. The reactor inoculated with EHTG (R(EHTG)) attained a maximum production rate of 2.7l H(2)l(-1)day(-1) in steady state. In comparison, the R(HTG) containing the HTG granules was very unstable, with low hydrogen productions and only two peaks of hydrogen (0.8 and 1.5l H(2)l(-1)day(-1)). The presence of active hydrogen producers in the R(EHTG) system during the reactor start-up resulted in the development of an efficient H(2)-producing bacterial community. The results showed that "engineered inocula" where known hydrogen producers are co-inoculated with HTG is an efficient way to start up biohydrogen-producing reactors. Copyright (c) 2010 Elsevier Ltd. All rights reserved.