The use of hypermedia to increase the productivity of software development teams

NASA Technical Reports Server (NTRS)

Coles, L. Stephen

1991-01-01

Rapid progress in low-cost commercial PC-class multimedia workstation technology will potentially have a dramatic impact on the productivity of distributed work groups of 50-100 software developers. Hypermedia/multimedia involves the seamless integration in a graphical user interface (GUI) of a wide variety of data structures, including high-resolution graphics, maps, images, voice, and full-motion video. Hypermedia will normally require the manipulation of large dynamic files for which relational data base technology and SQL servers are essential. Basic machine architecture, special-purpose video boards, video equipment, optical memory, software needed for animation, network technology, and the anticipated increase in productivity that will result for the introduction of hypermedia technology are covered. It is suggested that the cost of the hardware and software to support an individual multimedia workstation will be on the order of $10,000.

Defining the Relationship Between Human Error Classes and Technology Intervention Strategies

NASA Technical Reports Server (NTRS)

Wiegmann, Douglas A.; Rantanen, Esa; Crisp, Vicki K. (Technical Monitor)

2002-01-01

One of the main factors in all aviation accidents is human error. The NASA Aviation Safety Program (AvSP), therefore, has identified several human-factors safety technologies to address this issue. Some technologies directly address human error either by attempting to reduce the occurrence of errors or by mitigating the negative consequences of errors. However, new technologies and system changes may also introduce new error opportunities or even induce different types of errors. Consequently, a thorough understanding of the relationship between error classes and technology "fixes" is crucial for the evaluation of intervention strategies outlined in the AvSP, so that resources can be effectively directed to maximize the benefit to flight safety. The purpose of the present project, therefore, was to examine the repositories of human factors data to identify the possible relationship between different error class and technology intervention strategies. The first phase of the project, which is summarized here, involved the development of prototype data structures or matrices that map errors onto "fixes" (and vice versa), with the hope of facilitating the development of standards for evaluating safety products. Possible follow-on phases of this project are also discussed. These additional efforts include a thorough and detailed review of the literature to fill in the data matrix and the construction of a complete database and standards checklists.

JPRS Report, Soviet Union, The Working Class & The Contemporary World.

DTIC Science & Technology

1987-10-15

34 (14 April 1986). The abrupt changes in production relations and the recovery and growth of the economy have exerted a pronounced influence on the...the socioeconomic posi- tion of the peasantry: it has acquired an opportunity in its production and economic relations to go beyond the framework... relations , the principle of material interest and the technological discipline of large-scale production . A significant proportion of this youth remained

Using a CBL Unit, a Temperature Sensor, and a Graphing Calculator to Model the Kinetics of Consecutive First-Order Reactions as Safe In-Class Demonstrations

ERIC Educational Resources Information Center

Moore-Russo, Deborah A.; Cortes-Figueroa, Jose E.; Schuman, Michael J.

2006-01-01

The use of Calculator-Based Laboratory (CBL) technology, the graphing calculator, and the cooling and heating of water to model the behavior of consecutive first-order reactions is presented, where B is the reactant, I is the intermediate, and P is the product for an in-class demonstration. The activity demonstrates the spontaneous and consecutive…

JPRS Report, Science & Technology, USSR: Science & Technology Policy.

DTIC Science & Technology

1990-08-22

RESOURCE-CONSERVING AND ECOLOGI- CALLY CLEAN PROCESSES FOR METALLURGY AND CHEMISTRY : 25 MILLION RUBLES. Continuous and combined processes in metallurgy...class hydrocarbons from natural gas were developed. They are of great production importance. At the Institute of General and Inorganic Chemistry a...clinics of the country the study of the narcotic analgesic fenaridin, which was developed at the Institute of Fine Organic Chemistry , was completed. The

The Effects of Faculty Status, Faculty Gender, Field of Study, and Class Size on the Use of Blogs, Wikis, and Discussion Boards

ERIC Educational Resources Information Center

Yang, Dazhi; Spear, Caile E.

2017-01-01

This study examined faculty's use of time intensive Web 2.0 technologies (blogs, discussion forums, and wikis) in teaching during a university's quest for higher research productivity and higher ranking in the Carnegie Classification. Results show there was a difference in using Web 2.0 technologies in teaching between faculty with different…

To What Extent Does 'Flipping' Make Lessons Effective in a Multimedia Production Class?

ERIC Educational Resources Information Center

Choi, Jaeho; Lee, Youngju

2018-01-01

This study examines the effects of a flipped classroom in a technology integration course for pre-service teachers. In total, 79 students were randomly assigned into a flipped classroom or a traditional classroom group and given three multimedia production tasks. Students in the flipped group reviewed an e-book for lessons on multimedia…

The learning of aquaponics practice in university

NASA Astrophysics Data System (ADS)

Agustina, T. W.; Rustaman, N. Y.; Riandi; Purwianingsih, W.

2018-05-01

This study aims to obtain a description of the perfomance capabilities of aquaponic technology and the assessment of product and packaging of harvest kale. The aquaponic practice used a STREAM (Science Technology Religion Art Matematics) approach. The method was explanatory sequential mixed method. The research was conducted on one class of Biology Education students in 6th semester. The sample was chosen purposively with 49 students. The study instruments are student worksheet, observation sheet, rubric performance and product assessment, interview sheet and field notes. The indicator of performance rubrics on the manufacture of aquaponic technology consisted of the product rubric, cultivation criteria and packing method of kale. The interview rubric is in the form of student constraints on the manufacture of aquaponics. Based on the results, most students have performance in designing technology that is categorized as enough up to good. Almost all students produce a very good kale harvest. Most of the students produce kale packaging products that are categorized as enough. The implications of this research are the learning of aquaponic with the STREAM approach can equip student’s performance and product capabilities.

The Learning of Compost Practice in University

NASA Astrophysics Data System (ADS)

Agustina, T. W.; Rustaman, N. Y.; Riandi; Purwianingsih, W.

2017-09-01

The compost as one of the topics of the Urban Farming Movement in Bandung city, Indonesia. The preliminary study aims to obtain a description of the performance capabilities and compost products made by students with STREAM (Science-Technology-Religion-Art-Mathematics) approach. The method was explanatory sequential mixed method. The study was conducted on one class of Biology Education students at the one of the universities in Bandung, Indonesia. The sample was chosen purposively with the number of students as many as 44 people. The instruments were making Student Worksheets, Observation Sheets of Performance and Product Assessment, Rubric of Performance and Product, and Field Notes. The indicators of performance assessment rubrics include Stirring of Compost Materials and Composting Technology in accordance with the design. The product assessment rubric are a Good Composting Criteria and Compost Packaging. The result of can be stated most students have good performance. However, the ability to design of compost technology, compost products and the ability to pack compost are still lacking. The implication of study is students of Biology Education require habituation in the ability of designing technology.

Kent and Riegel's Handbook of industrial chemistry and biotechnology. 11th ed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kent, James A.

2007-07-01

This handbook provides extensive information on plastics, rubber, adhesives, textile fibers, pharmaceutical chemistry, synthetic organic chemicals, soaps and detergents, as well as various other major classes of industrial chemistry. There is detailed coverage of coal utilization technology, dyes and dye intermediates, chlor-alkali and heavy chemicals, paints and pigments, chemical explosives, propellants, petroleum and petrochemicals, natural gas, industrial gases, synthetic nitrogen products, fats and oils, sulfur and sulfuric acid, phosphorous and phosphates, wood products, and sweeteners. The chapter on coal is entitled: coal technology for power, liquid fuels and chemicals. 100 ills.

48 CFR 23.803 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE... procurement of alternative chemicals, products, and manufacturing processes that reduce overall risks to human...), except in the case of Class I substances being used for specified essential uses, as identified under 40...

Joint Cost, Production Technology and Output Disaggregation in Regulated Motor Carriers

DOT National Transportation Integrated Search

1978-11-01

The study uses a sample of 252 Class I Instruction 27 Motor Carriers (Instruction 27 carriers earned at least 75 percent of their revenues from intercity transportation of general commodities over a three year period) of general freight that existed ...

Flipping the Class: A New Media Pedagogy

ERIC Educational Resources Information Center

Arduser, Lora

2016-01-01

Business communication evolves and adapts to suit the times, and today's workplace documents are increasingly multimodal. Therefore, business and professional communication specialists need to adapt to a new media workplace ecology--one that requires proficiencies with technologies such as video production, digital animation, and sound. Business…

The effects of collaborative video production on the attitudes and science knowledge of sixth graders

NASA Astrophysics Data System (ADS)

Gaston, Joseph Pickett

This quantitative study examined the effects of collaborative video production (CVP) on the attitudes and conceptual understanding of sixth-grade science students at a public middle school in the Southeastern United States. This study followed the nonequivalent control group design, as described by Campbell and Stanley (1963). The study involved four classes of sixth-grade students. The two control classes were taught the science concept by the cooperating teacher through direct instruction, and the two experimental classes learned the science concept through the CVP project. Pre- and posttests were administered to all students, as well as two pre- and post-surveys measuring student attitudes towards science and technology. Analysis of covariance (ANCOVA) with the pretest scores as the covariate (Xc) was conducted with the posttest and post-survey data to determine if a significant difference existed in scores between the two groups. In each case, no significant difference was found. The results of this study suggest that CVP was as effective at conveying conceptual understanding to sixth-grade science students as direct instruction. Although not significant, the study also showed that mean scores of students' attitudes towards science and technology increased from pre-surveys to post-surveys for those who participated in the CVP activity. These findings suggest that the treatment contributed to an increase in participants' attitudes and towards technology and the academic subject. No such increase in mean post-survey scores existed for students receiving direct instruction.

Direct Capture Technologies for Genomics-Guided Discovery of Natural Products.

PubMed

Chan, Andrew N; Santa Maria, Kevin C; Li, Bo

2016-01-01

Microbes are important producers of natural products, which have played key roles in understanding biology and treating disease. However, the full potential of microbes to produce natural products has yet to be realized; the overwhelming majority of natural product gene clusters encoded in microbial genomes remain "cryptic", and have not been expressed or characterized. In contrast to the fast-growing number of genomic sequences and bioinformatic tools, methods to connect these genes to natural product molecules are still limited, creating a bottleneck in genome-mining efforts to discover novel natural products. Here we review developing technologies that leverage the power of homologous recombination to directly capture natural product gene clusters and express them in model hosts for isolation and structural characterization. Although direct capture is still in its early stages of development, it has been successfully utilized in several different classes of natural products. These early successes will be reviewed, and the methods will be compared and contrasted with existing traditional technologies. Lastly, we will discuss the opportunities for the development of direct capture in other organisms, and possibilities to integrate direct capture with emerging genome-editing techniques to accelerate future study of natural products.

New laser protective eyewear

NASA Astrophysics Data System (ADS)

McLear, Mark

1996-04-01

Laser technology has significantly impacted our everyday life. Lasers are now used to correct your vision, clear your arteries, and are used in the manufacturing of such diverse products as automobiles, cigarettes, and computers. Lasers are no longer a research tool looking for an application. They are now an integral part of manufacturing. In the case of Class IV lasers, this explosion in laser applications has exposed thousands of individuals to potential safety hazards including eye damage. Specific protective eyewear designed to attenuate the energy of the laser beam below the maximum permissible exposure is required for Class 3B and Class IV lasers according to laser safety standards.

Impact of a transposon insertion in phzF2 on the specialized metabolite production and interkingdom interactions of Pseudomonas aeruginosa.

PubMed

Phelan, Vanessa V; Moree, Wilna J; Aguilar, Julieta; Cornett, Dale S; Koumoutsi, Alexandra; Noble, Suzanne M; Pogliano, Kit; Guerrero, Carlos A; Dorrestein, Pieter C

2014-05-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production.

Impact of a Transposon Insertion in phzF2 on the Specialized Metabolite Production and Interkingdom Interactions of Pseudomonas aeruginosa

PubMed Central

Phelan, Vanessa V.; Moree, Wilna J.; Aguilar, Julieta; Cornett, Dale S.; Koumoutsi, Alexandra; Noble, Suzanne M.; Pogliano, Kit; Guerrero, Carlos A.

2014-01-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production. PMID:24532776

The application of artificial intelligence technology to aeronautical system design

NASA Technical Reports Server (NTRS)

Bouchard, E. E.; Kidwell, G. H.; Rogan, J. E.

1988-01-01

This paper describes the automation of one class of aeronautical design activity using artificial intelligence and advanced software techniques. Its purpose is to suggest concepts, terminology, and approaches that may be useful in enhancing design automation. By understanding the basic concepts and tasks in design, and the technologies that are available, it will be possible to produce, in the future, systems whose capabilities far exceed those of today's methods. Some of the tasks that will be discussed have already been automated and are in production use, resulting in significant productivity benefits. The concepts and techniques discussed are applicable to all design activity, though aeronautical applications are specifically presented.

[PRIORITY TECHNOLOGIES OF THE MEDICAL WASTE DISPOSAL SYSTEM].

PubMed

Samutin, N M; Butorina, N N; Starodubova, N Yu; Korneychuk, S S; Ustinov, A K

2015-01-01

The annual production of waste in health care institutions (HCI) tends to increase because of the growth of health care provision for population. Among the many criteria for selecting the optimal treatment technologies HCI is important to provide epidemiological and chemical safety of the final products. Environmentally friendly method of thermal disinfection of medical waste may be sterilizators of medical wastes intended for hospitals, medical centers, laboratories and other health care facilities that have small and medium volume of processing of all types of waste Class B and C. The most optimal method of centralized disposal of medical waste is a thermal processing method of the collected material.

Empowering Pre-Service Teachers to Produce Ubiquitous Flipped Classes

ERIC Educational Resources Information Center

García-Sánchez, Soraya; Santos-Espino, Jose Miguel

2017-01-01

This work focuses on technological and educational outcomes that resulted from the production of foreign language educational videos by 90 pre-service instructors enrolled in an official Master's Degree in Secondary Education programme. This teaching practice, conducted during two consecutive years, was set in a ubiquitous learning environment…

21 CFR 830.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... identification and data capture (AIDC) means any technology that conveys the unique device identifier or the... use. Human cell, tissue, or cellular or tissue-based product (HCT/P) regulated as a device means an... device or more that consist of a single type, model, class, size, composition, or software version that...

The Video Toaster Meets Science + English + At-Risk Students.

ERIC Educational Resources Information Center

Perryess, Charlie

1992-01-01

Describes an experimental Science-English class for at-risk students which was team taught and used technology--particularly a Video Toaster (a videotape editing machine)--as a motivator. Discusses procedures for turning videotape taken on field trips into three- to five-minute student productions on California's water crisis. (SR)

Perceptions of Presentation Capture in Counselor Education

ERIC Educational Resources Information Center

Gibson, Robert; Miller, Ann

2011-01-01

Lecture/presentation capture is a gradually emerging technology at many colleges and universities and will likely increase in use because students prefer courses that offer online lectures over traditional classes that do not. Many capture products also allow faculty to segment and edit lectures, add/exchange notations, view lectures on mobile…

Rational preparation of waste coal mixture for production of bricks by the method of compression molding

NASA Astrophysics Data System (ADS)

Stolboushkin, A. Yu; Ivanov, A. I.; Temlyantsev, M. V.; Fomina, O. A.

2016-10-01

Rational preparation of the mixture containing technogenic raw material - waste coal for the production of wall ceramics is developed. It was established that the technology of high-quality ceramic bricks requires: grinding of raw materials to class 0.3 + 0 mm, its aggregation in the intensive mixers into granules 1-3 mm, compression molding of adobe to plastic deformation of granules, drying and firing.

White House Technology Reinvestment Project Briefing And Transcripts

DTIC Science & Technology

1993-04-12

commercial standard accounting NASA, and the Air Force, to develop an entirely new practices meeting Generally Accepted Accounting class of materials for use...diversion, and what we’ll call new very effective public servants. We are product development . This is not going extremely impressed with them. I can... develop new products and new demonstrably our nation’s competitive, markets. This project has generated enormous By supporting innovative interest in the

Perceptibility and the "Choice Experience": User Sensory Perceptions and Experiences Inform Vaginal Prevention Product Design.

PubMed

Guthrie, Kate Morrow; Dunsiger, Shira; Vargas, Sara E; Fava, Joseph L; Shaw, Julia G; Rosen, Rochelle K; Kiser, Patrick F; Kojic, E Milu; Friend, David R; Katz, David F

The development of pericoital (on demand) vaginal HIV prevention technologies remains a global health priority. Clinical trials to date have been challenged by nonadherence, leading to an inability to demonstrate product efficacy. The work here provides new methodology and results to begin to address this limitation. We created validated scales that allow users to characterize sensory perceptions and experiences when using vaginal gel formulations. In this study, we sought to understand the user sensory perceptions and experiences (USPEs) that characterize the preferred product experience for each participant. Two hundred four women evaluated four semisolid vaginal formulations using the USPE scales at four randomly ordered formulation evaluation visits. Women were asked to select their preferred formulation experience for HIV prevention among the four formulations evaluated. The scale scores on the Sex-associated USPE scales (e.g., Initial Penetration and Leakage) for each participant's selected formulation were used in a latent class model analysis. Four classes of preferred formulation experiences were identified. Sociodemographic and sexual history variables did not predict class membership; however, four specific scales were significantly related to class: Initial Penetration, Perceived Wetness, Messiness, and Leakage. The range of preferred user experiences represented by the scale scores creates a potential target range for product development, such that products that elicit scale scores that fall within the preferred range may be more acceptable, or tolerable, to the population under study. It is recommended that similar analyses should be conducted with other semisolid vaginal formulations, and in other cultures, to determine product property and development targets.

Terpenoid-Alkaloids: Their Biosynthetic Twist of Fate and Total Synthesis.

PubMed

Cherney, Emily C; Baran, Phil S

2011-04-01

Terpenes and alkaloids are ever-growing classes of natural products that provide new molecular structures which inspire chemists and possess a broad range of biological activity. Terpenoid-alkaloids originate from the same prenyl units that construct terpene skeletons. However, during biosynthesis, a nitrogen atom (or atoms) is introduced in the form of β-aminoethanol, ethylamine, or methylamine. Nitrogen incorporation can occur either before, during, or after the cyclase phase. The outcome of this unique biosynthesis is the formation of natural products containing unprecedented structures. These complex structural motifs expose current limitations in organic chemistry, thus providing opportunities for invention. This review focuses on total syntheses of terpenoid-alkaloids and unique issues presented by this class of natural products. More specifically, it examines how these syntheses relate to the way terpenoid-alkaloids are made in Nature. Developments in chemistry that have facilitated these syntheses are emphasized, as well as chemical technology needed to conquer those that evade synthesis.

Three Approaches to Teaching the Same Subject at Two Universities.

ERIC Educational Resources Information Center

Taricani, Ellen

In the fall of 1997, a senior level course was taught as an interdisciplinary class for learning the processes in food product development. The course implemented many new teaching methods and technologies. It was an effort between two departments: food science and agricultural economics. Students worked in teams with industry mentors who assisted…

Resource Recovery. Redefining the 3 Rs. Reduce...Reuse...Recycle. Resources in Technology.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

Discusses the problems of waste disposal, recycling, and resource recovery. Includes information on the social and cultural impact, the three classes of resource recovery (reuse, direct recycling, and indirect recycling), and specific products (paper, glass, plastics, metals, and so on). Includes a student quiz and possible outcomes. (JOW)

Can radiation chemistry supply a highly efficient AO(R)P process for organics removal from drinking and waste water? A review.

PubMed

Trojanowicz, Marek; Bojanowska-Czajka, Anna; Capodaglio, Andrea G

2017-09-01

The increasing role of chemistry in industrial production and its direct and indirect impacts in everyday life create the need for continuous search and efficiency improvement of new methods for decomposition/removal of different classes of waterborne anthropogenic pollutants. This review paper addresses a highly promising class of water treatment solutions, aimed at tackling the pressing problem of emerging contaminants in natural and drinking waters and wastewater discharges. Radiation processing, a technology originating from radiation chemistry studies, has shown encouraging results in the treatment of (mainly) organic water pollution. Radiation ("high energy") processing is an additive-free technology using short-lived reactive species formed by the radiolysis of water, both oxidative and reducing, to carry out decomposition of organic pollutants. The paper illustrates the basic principles of radiolytic treatment of organic pollutants in water and wastewaters and specifically of one of its most practical implementations (electron beam processing). Application examples, highlighting the technology's strong points and operational conditions are described, and a discussion on the possible future of this technology follows.

Biological safety cabinetry.

PubMed Central

Kruse, R H; Puckett, W H; Richardson, J H

1991-01-01

The biological safety cabinet is the one piece of laboratory and pharmacy equipment that provides protection for personnel, the product, and the environment. Through the history of laboratory-acquired infections from the earliest published case to the emergence of hepatitis B and AIDS, the need for health care worker protection is described. A brief description with design, construction, function, and production capabilities is provided for class I and class III safety cabinets. The development of the high-efficiency particulate air filter provided the impetus for clean room technology, from which evolved the class II laminar flow biological safety cabinet. The clean room concept was advanced when the horizontal airflow clean bench was manufactured; it became popular in pharmacies for preparing intravenous solutions because the product was protected. However, as with infectious microorganisms and laboratory workers, individual sensitization to antibiotics and the advent of hazardous antineoplastic agents changed the thinking of pharmacists and nurses, and they began to use the class II safety cabinet to prevent adverse personnel reactions to the drugs. How the class II safety cabinet became the mainstay in laboratories and pharmacies is described, and insight is provided into the formulation of National Sanitation Foundation standard number 49 and its revisions. The working operations of a class II cabinet are described, as are the variations of the four types with regard to design, function, air velocity profiles, and the use of toxins. The main certification procedures are explained, with examples of improper or incorrect certifications. The required levels of containment for microorganisms are given. Instructions for decontaminating the class II biological safety cabinet of infectious agents are provided; unfortunately, there is no method for decontaminating the cabinet of antineoplastic agents. Images PMID:2070345

Global, Frequent Landsat-class Mosaics for Real Time Crop Monitoring and Analysis

NASA Astrophysics Data System (ADS)

Varlyguin, D.; Crutchfield, J.; Hulina, S.; Reynolds, C. A.; Frantz, R.; Tetrault, R. L.

2016-12-01

The presentation will discuss the current status of GDA technology for operational, automated generation of near global mosaics of Landsat-class data for visualization, monitoring, and analysis. Current version of the mosaic combines Landsat 8 and Landsat 7. Sentinel-2A and ASTER imagery are to be added shortly. The mosaics are surface reflectance calibrated and are analysis ready. They offer full spatial resolution and all multi-spectral bands of the source imagery. Each mosaic covers all major agricultural regions of the world for the last 18 months with a 16 day frequency. The mosaics are updated in real-time, as soon as GDA downloads the imagery, calibrates it to the surface reflectances, and generates data gap masks (all typically under 10 minutes for a Landsat scene). Best pixel value from available opportunities is selected during the mosaic update. The technology eliminates the complex, multi-step, hands-on process of data preparation and provides imagery ready for repetitive, field-to-country analysis of crop conditions, progress, acreages, yield, and production. The mosaics are used for real-time, on-line interactive mapping and time series drilling via GeoSynergy webGIS platform and for off line in-season crop mapping. USDA FAS uses this product for persistent monitoring of selected countries and their croplands and for in-season crop analysis. The presentation will overview Landsat-class mosaics and their use in support of USDA FAS efforts.

A Case Study for Teaching Quantitative Biochemical Buffer Problems Using Group Work and "Khan Style" Videos

ERIC Educational Resources Information Center

Barreto, Jose; Reilly, John; Brown, David; Frost. Laura; Coticone, Sulekha Rao; Dubetz, Terry Ann; Beharry, Zanna; Davis-McGibony, C. Michele; Ramoutar, Ria; Rudd, Gillian

2014-01-01

New technological developments have minimized training, hardware expense, and distribution problems for the production and use of instructional videos, and any science instructor can now make instructional videos for their classes. We created short "Khan style" videos for the topic of buffers in biochemistry and assigned them as…

A Predictive Study of Learner Attitudes toward Open Learning in a Robotics Class

ERIC Educational Resources Information Center

Avsec, Stanislav; Rihtarsic, David; Kocijancic, Slavko

2014-01-01

Open learning (OL) strives to transform teaching and learning by applying learning science and emerging technologies to increase student success, improve learning productivity, and lower barriers to access. OL of robotics has a significant growth rate in secondary and/or high schools, but failures exist. Little is known about why many users stop…

Tablet PCs in a Paperless Classroom: Student and Teacher Perceptions on Screen Size

ERIC Educational Resources Information Center

Runnels, Judith; Rutson-Griffiths, Arthur

2013-01-01

A paperless classroom, when all materials required to complete a class are available in an electronic form, has been shown to have positive impacts on student and teacher motivation, engagement, productivity, and efficiency. Recent trends suggest that of all of the technological tools available, tablet PCs can support many aspects of a paperless…

America's Pressing Challenge - Building a Stronger Foundation. A Companion to Science and Engineering Indicators - 2006. NSB-06-02

ERIC Educational Resources Information Center

National Science Foundation, 2006

2006-01-01

This document identifies priorities for ensuring a world-class education in science, technology, engineering, and mathematics (STEM) fields for all Americans. America's competitive edge in this "flat world," its strength and versatility, all depend on an educational system capable of producing young people and productive citizens who are well…

Development and Validation of a Gas-Fired Residential Heat Pump Water Heater - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael Garrabrant; Roger Stout; Paul Glanville

2013-01-21

For gas-fired residential water heating, the U.S. and Canada is predominantly supplied by minimum efficiency storage water heaters with Energy Factors (EF) in the range of 0.59 to 0.62. Higher efficiency and higher cost ($700 - $2,000) options serve about 15% of the market, but still have EFs below 1.0, ranging from 0.65 to 0.95. To develop a new class of water heating products that exceeds the traditional limit of thermal efficiency, the project team designed and demonstrated a packaged water heater driven by a gas-fired ammonia-water absorption heat pump. This gas-fired heat pump water heater can achieve EFs ofmore » 1.3 or higher, at a consumer cost of $2,000 or less. Led by Stone Mountain Technologies Inc. (SMTI), with support from A.O. Smith, the Gas Technology Institute (GTI), and Georgia Tech, the cross-functional team completed research and development tasks including cycle modeling, breadboard evaluation of two cycles and two heat exchanger classes, heat pump/storage tank integration, compact solution pump development, combustion system specification, and evaluation of packaged prototype GHPWHs. The heat pump system extracts low grade heat from the ambient air and produces high grade heat suitable for heating water in a storage tank for domestic use. Product features that include conventional installation practices, standard footprint and reasonable economic payback, position the technology to gain significant market penetration, resulting in a large reduction of energy use and greenhouse gas emissions from domestic hot water production.« less

European display scene

NASA Astrophysics Data System (ADS)

Bartlett, Christopher T.

2000-08-01

The manufacture of Flat Panel Displays (FPDs) is dominated by Far Eastern sources, particularly in Active Matrix Liquid Crystal Displays (AMLCD) and Plasma. The United States has a very powerful capability in micro-displays. It is not well known that Europe has a very active research capability which has lead to many innovations in display technology. In addition there is a capability in display manufacturing of organic technologies as well as the licensed build of Japanese or Korean designs. Finally, Europe has a display systems capability in military products which is world class.

42 CFR 416.185 - Process for establishing a new class of new technology IOLs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.185 Process for establishing a new class of new technology IOLs. (a) Announcement of deadline for requests for review. CMS announces the deadline for each year's requests for review of a new class of new technology...

Educational technologies and the teaching of ethics in science and engineering.

PubMed

Loui, Michael C

2005-07-01

To support the teaching of ethics in science and engineering, educational technologies offer a variety of functions: communication between students and instructors, production of documents, distribution of documents, archiving of class sessions, and access to remote resources. Instructors may choose to use these functions of the technologies at different levels of intensity, to support a variety of pedagogies, consistent with accepted good practices. Good pedagogical practices are illustrated in this paper with four examples of uses of educational technologies in the teaching of ethics in science and engineering. Educational technologies impose costs for the purchase of hardware, licensing of software, hiring of support personnel, and training of instructors. Whether the benefits justify these costs is an unsettled question. While many researchers are studying the possible benefits of educational technologies, all instructors should assess the effectiveness of their practices.

Teledesic Global Wireless Broadband Network: Space Infrastructure Architecture, Design Features and Technologies

NASA Technical Reports Server (NTRS)

Stuart, James R.

1995-01-01

The Teledesic satellites are a new class of small satellites which demonstrate the important commercial benefits of using technologies developed for other purposes by U.S. National Laboratories. The Teledesic satellite architecture, subsystem design features, and new technologies are described. The new Teledesic satellite manufacturing, integration, and test approaches which use modern high volume production techniques and result in surprisingly low space segment costs are discussed. The constellation control and management features and attendant software architecture features are addressed. After briefly discussing the economic and technological impact on the USA commercial space industries of the space communications revolution and such large constellation projects, the paper concludes with observations on the trend toward future system architectures using networked groups of much smaller satellites.

Synthesis and analysis of separation networks for the recovery of intracellular chemicals generated from microbial-based conversions

DOE PAGES

Yenkie, Kirti M.; Wu, Wenzhao; Maravelias, Christos T.

2017-05-08

Background. Bioseparations can contribute to more than 70% in the total production cost of a bio-based chemical, and if the desired chemical is localized intracellularly, there can be additional challenges associated with its recovery. Based on the properties of the desired chemical and other components in the stream, there can be multiple feasible options for product recovery. These options are composed of several alternative technologies, performing similar tasks. The suitability of a technology for a particular chemical depends on (1) its performance parameters, such as separation efficiency; (2) cost or amount of added separating agent; (3) properties of the bioreactormore » effluent (e.g., biomass titer, product content); and (4) final product specifications. Our goal is to first synthesize alternative separation options and then analyze how technology selection affects the overall process economics. To achieve this, we propose an optimization-based framework that helps in identifying the critical technologies and parameters. Results. We study the separation networks for two representative classes of chemicals based on their properties. The separation network is divided into three stages: cell and product isolation (stage I), product concentration (II), and product purification and refining (III). Each stage exploits differences in specific product properties for achieving the desired product quality. The cost contribution analysis for the two cases (intracellular insoluble and intracellular soluble) reveals that stage I is the key cost contributor (>70% of the overall cost). Further analysis suggests that changes in input conditions and technology performance parameters lead to new designs primarily in stage I. Conclusions. The proposed framework provides significant insights for technology selection and assists in making informed decisions regarding technologies that should be used in combination for a given set of stream/product properties and final output specifications. Additionally, the parametric sensitivity provides an opportunity to make crucial design and selection decisions in a comprehensive and rational manner. This will prove valuable in the selection of chemicals to be produced using bioconversions (bioproducts) as well as in creating better bioseparation flow sheets for detailed economic assessment and process implementation on the commercial scale.« less

Synthesis and analysis of separation networks for the recovery of intracellular chemicals generated from microbial-based conversions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yenkie, Kirti M.; Wu, Wenzhao; Maravelias, Christos T.

Background. Bioseparations can contribute to more than 70% in the total production cost of a bio-based chemical, and if the desired chemical is localized intracellularly, there can be additional challenges associated with its recovery. Based on the properties of the desired chemical and other components in the stream, there can be multiple feasible options for product recovery. These options are composed of several alternative technologies, performing similar tasks. The suitability of a technology for a particular chemical depends on (1) its performance parameters, such as separation efficiency; (2) cost or amount of added separating agent; (3) properties of the bioreactormore » effluent (e.g., biomass titer, product content); and (4) final product specifications. Our goal is to first synthesize alternative separation options and then analyze how technology selection affects the overall process economics. To achieve this, we propose an optimization-based framework that helps in identifying the critical technologies and parameters. Results. We study the separation networks for two representative classes of chemicals based on their properties. The separation network is divided into three stages: cell and product isolation (stage I), product concentration (II), and product purification and refining (III). Each stage exploits differences in specific product properties for achieving the desired product quality. The cost contribution analysis for the two cases (intracellular insoluble and intracellular soluble) reveals that stage I is the key cost contributor (>70% of the overall cost). Further analysis suggests that changes in input conditions and technology performance parameters lead to new designs primarily in stage I. Conclusions. The proposed framework provides significant insights for technology selection and assists in making informed decisions regarding technologies that should be used in combination for a given set of stream/product properties and final output specifications. Additionally, the parametric sensitivity provides an opportunity to make crucial design and selection decisions in a comprehensive and rational manner. This will prove valuable in the selection of chemicals to be produced using bioconversions (bioproducts) as well as in creating better bioseparation flow sheets for detailed economic assessment and process implementation on the commercial scale.« less

Synthesis and analysis of separation networks for the recovery of intracellular chemicals generated from microbial-based conversions.

PubMed

Yenkie, Kirti M; Wu, Wenzhao; Maravelias, Christos T

2017-01-01

Bioseparations can contribute to more than 70% in the total production cost of a bio-based chemical, and if the desired chemical is localized intracellularly, there can be additional challenges associated with its recovery. Based on the properties of the desired chemical and other components in the stream, there can be multiple feasible options for product recovery. These options are composed of several alternative technologies, performing similar tasks. The suitability of a technology for a particular chemical depends on (1) its performance parameters, such as separation efficiency; (2) cost or amount of added separating agent; (3) properties of the bioreactor effluent (e.g., biomass titer, product content); and (4) final product specifications. Our goal is to first synthesize alternative separation options and then analyze how technology selection affects the overall process economics. To achieve this, we propose an optimization-based framework that helps in identifying the critical technologies and parameters. We study the separation networks for two representative classes of chemicals based on their properties. The separation network is divided into three stages: cell and product isolation (stage I), product concentration (II), and product purification and refining (III). Each stage exploits differences in specific product properties for achieving the desired product quality. The cost contribution analysis for the two cases (intracellular insoluble and intracellular soluble) reveals that stage I is the key cost contributor (>70% of the overall cost). Further analysis suggests that changes in input conditions and technology performance parameters lead to new designs primarily in stage I. The proposed framework provides significant insights for technology selection and assists in making informed decisions regarding technologies that should be used in combination for a given set of stream/product properties and final output specifications. Additionally, the parametric sensitivity provides an opportunity to make crucial design and selection decisions in a comprehensive and rational manner. This will prove valuable in the selection of chemicals to be produced using bioconversions (bioproducts) as well as in creating better bioseparation flow sheets for detailed economic assessment and process implementation on the commercial scale.

Early Identification of SE-Related Program Risks

DTIC Science & Technology

2009-09-30

development of feasibility evidence for a 100-KSLOC project . It is good to note that the “sweet spots” are... models , or experiments with planned technologies and increasingly detailed analysis of development approaches and project productivity rates. The ...incomplete without the FED, it becomes a first-class project deliverable. This implies that it needs a plan for its development , and that each task

Overview of emerging nonvolatile memory technologies

PubMed Central

2014-01-01

Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new class of memory technologies and scaling of scientific procedures based on an investigation of recent progress in advanced Flash memory devices. PMID:25278820

Overview of emerging nonvolatile memory technologies.

PubMed

Meena, Jagan Singh; Sze, Simon Min; Chand, Umesh; Tseng, Tseung-Yuen

2014-01-01

Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new class of memory technologies and scaling of scientific procedures based on an investigation of recent progress in advanced Flash memory devices.

Development of an Exploration-Class Cascade Distillation System: Flight Like Prototype Preliminary Design

NASA Technical Reports Server (NTRS)

Callahan, Michael R.; Sargusingh, Miriam J.

2015-01-01

The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, distillation systems have been actively pursued as one of the technologies for water recovery. One such technology is the Cascade Distillation System (CDS) a multi-stage vacuum rotary distiller system designed to recover water in a microgravity environment. Its rotating cascading distiller operates similarly to the state of the art (SOA) vapor compressor distiller (VCD), but its control scheme and ancillary components are judged to be straightforward and simpler to implement into a successful design. Through the Advanced Exploration Systems (AES) Life Support Systems (LSS) Project, the NASA Johnson Space Center (JSC) in collaboration with Honeywell International is developing a second generation flight forward prototype (CDS 2.0). The key objectives for the CDS 2.0 design task is to provide a flight forward ground prototype that demonstrates improvements over the SOA system in the areas of increased reliability and robustness, and reduced mass, power and volume. It will also incorporate exploration-class automation. The products of this task are a preliminary flight system design and a high fidelity prototype of an exploration class CDS. These products will inform the design and development of the third generation CDS which is targeted for on-orbit DTO. This paper details the preliminary design of the CDS 2.0.

The re-emerging role of microbial natural products in antibiotic discovery.

PubMed

Genilloud, Olga

2014-07-01

New classes of antibacterial compounds are urgently needed to respond to the high frequency of occurrence of resistances to all major classes of known antibiotics. Microbial natural products have been for decades one of the most successful sources of drugs to treat infectious diseases but today, the emerging unmet clinical need poses completely new challenges to the discovery of novel candidates with the desired properties to be developed as antibiotics. While natural products discovery programs have been gradually abandoned by the big pharma, smaller biotechnology companies and research organizations are taking over the lead in the discovery of novel antibacterials. Recent years have seen new approaches and technologies being developed and integrated in a multidisciplinary effort to further exploit microbial resources and their biosynthetic potential as an untapped source of novel molecules. New strategies to isolate novel species thought to be uncultivable, and synthetic biology approaches ranging from genome mining of microbial strains for cryptic biosynthetic pathways to their heterologous expression have been emerging in combination with high throughput sequencing platforms, integrated bioinformatic analysis, and on-site analytical detection and dereplication tools for novel compounds. These different innovative approaches are defining a completely new framework that is setting the bases for the future discovery of novel chemical scaffolds that should foster a renewed interest in the identification of novel classes of natural product antibiotics from the microbial world.

Project Based Learning Multi Life Skill for Collaborative Skills and Technological Skills of Senior High School Students

NASA Astrophysics Data System (ADS)

Susilawati; Ardhyani, S.; Masturi; Wijayanto; Khoiri, N.

2017-04-01

This work aims to determine the effect of Project Based Learning containing Multi Life-Skills on collaborative and technology skills of senior high school (SMA) students, especially on thestatic fluid subject. The research design was aquasi-experiment using Posttest-Only Control Design. This work was conducted in SMA Negeri 1 Bae Kudus, with the population is all students of class X, while the sample is students of class X MIA 2 as an experimental class and X MIA 3 as a control class. The data were obtained by observation, test, and documentation. The results showed this model significantly affects the collaborative and technology skills of students of SMA 1 Bae Kudus, where the average result of collaborative and technology skills for the experimental class is higher than that of the control class. This is also supported by the remark of the post-test experimental class is higher than that of the control class.

NASA/BLM APT, phase 2. Volume 2: Technology demonstration. [Arizona

NASA Technical Reports Server (NTRS)

1981-01-01

Techniques described include: (1) steps in the preprocessing of LANDSAT data; (2) the training of a classifier; (3) maximum likelihood classification and precision; (4) geometric correction; (5) class description; (6) digitizing; (7) digital terrain data; (8) an overview of sample design; (9) allocation and selection of primary sample units; (10) interpretation of secondary sample units; (11) data collection ground plots; (12) data reductions; (13) analysis for productivity estimation and map verification; (14) cost analysis; and (150) LANDSAT digital products. The evaluation of the pre-inventory planning for P.J. is included.

Do Science and Technology Teachers and Pre-Service Primary Teachers Have Different Thoughts about Concept Maps in Science and Technology Lessons?

ERIC Educational Resources Information Center

Karakuyu, Yunus

2011-01-01

The purpose of this study is to determine the thoughts of primary science and technology teachers, primary class teachers, pre-service primary class teachers and pre-service primary science and technology teachers' about concept maps. This scale applied the use of basic and random method on the chosen 125 4th and 5th grade primary class teachers…

20% Research & Design Science Project

NASA Astrophysics Data System (ADS)

Spear, Beth A.

2015-04-01

A project allowing employees to use 15 % of their time on independent projects was established at 3M in the 1950's. The result of this project included products like post it notes and masking tape. Google allows its employees to use 20% of their time on independently pursued projects. The company values creativity and innovation. Employees are allowed to explore projects of interest to them one day out of the week, 20 % of their work week. Products like AdSense, Gmail, Google Transit, Google News, and Google Talk are the result of this 20 % program. My school is implementing the Next Generation Science Standards (NGSS) as part of our regularly scheduled curriculum review. These new standards focus on the process of learning by doing and designing. The NGSS are very hands on and active. The new standards emphasize learning how to define, understand and solve problems in science and technology. In today's society everyone needs to be familiar with science and technology. This project allows students to develop and practice skills to help them be more comfortable and confident with science and technology while exploring something of interest to them. This project includes three major parts: research, design, and presentation. Students will spend approximately 2-4 weeks defining a project proposal and educating themselves by researching a science and technology topic that is of interest to them. In the next phase, 2-4 weeks, students design a product or plan to collect data for something related to their topic. The time spent on research and design will be dependant on the topic students select. Projects should be ambitious enough to encompass about six weeks. Lastly a presentation or demonstration incorporating the research and design of the project is created, peer reviewed and presented to the class. There are some problems anticipated or already experienced with this project. It is difficult for all students to choose a unique topic when you have large class sizes. Some students find it painful to design something independently as they are used to being told what to do. Assessing the projects, which include a wide degree of ambition established within the proposal, can be challenging. Implementation of this project requires the loss of approximately 20 % of class time. This can be a challenge when class time is already at a premium. However; the benefits of this project outweigh the loss of instructional time. This project is student centered and allows each student to pursue a topic of interest to them. This ability to choose their own topic allows students to explore with very few boundaries to confine their imagination. The project allows students to propose an ambitious project. The option for failure with the design portion of the project allows them to learn that failure is not always negative and can provide many learning opportunities, much like real world situations. This project is aligned with the NGSS encouraging creativity and innovation through unique, authentic investigations in science and technology.

OAST Space Theme Workshop. Volume 3: Working Group Summary. 5: Propulsion (P-1). A. Summary Statement. B. Technology Needs (Form 1). C. Priority Assessments (Form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

All themes require some form of advanced propulsion capabilities to achieve their stated objectives. Requirements cover a broad spectrum ranging from a new generation of heavy lift launch vehicles to low thrust, long lift system for on-orbit operations. The commonality extant between propulsive technologies was established and group technologies were grouped into vehicle classes by functional capability. The five classes of launch vehicles identified by the space transportation theme were augmented with a sixth class, encompassing planetary and on-orbit operations. Propulsion technologies in each class were then ranked, and assigned priority numbers. Prioritized technologies were matched to theme requirements.

Technology to sort lumber by color and grain for furniture parts

Treesearch

D. Earl Kline; Richard Conners; Philip A. Araman

2000-01-01

This paper describes an automatic color and grain sorting system for wood edge-glued panel parts. The color sorting system simultaneously examines both faces of a panel part and then determines which face has the "best" color, and sorts the part into one of a number of color classes at plant production speeds. In-plant test results show that the system...

Smart adaptable system for older adults' Daily Life Activities Management - The ABLE platform.

PubMed

Giokas, Kostas; Anastasiou, Athanasios; Tsirmpas, Charalampos; Koutsouri, Georgia; Koutsouris, Dimitris; Iliopoulou, Dimitra

2014-01-01

In this paper we propose a system (ABLE) that will act as the main platform for a number of low-cost, mature technologies that will be integrated in order to create a dynamically adaptive Daily Life Activities Management environment in order to facilitate the everyday life of senior (but not exclusively) citizens at home. While the main target group of ABLE's users is the ageing population its use can be extended to all people that are vulnerable or atypical in body, intellect or emotions and are categorized by society as disabled. The classes of assistive products that are well defined in the international standard, ISO9999 such as assistive products for personal medical treatment, personal care and protection, communication, information and reaction and for personal mobility, will be easily incorporated in our proposed platform. Furthermore, our platform could integrate and implement the above classes under several service models that will be analyzed further.

New membranes could speed the biofuels conversion process and reduce cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Michael

2014-07-23

ORNL researchers have developed a new class of membranes that could enable faster, more cost efficient biofuels production. These membranes are tunable at the nanopore level and have potential uses in separating water from fuel and acid from bio-oils. The membrane materials technology just won an R&D 100 award. ORNL and NREL are partnering, with support from the DOE Bioenergy Technologies Office, to determine the best uses of these membranes to speed the biofuels conversion process. Development of the membranes was funded by DOE BETO and ORNL's Laboratory Directed Research and Development Program.

New membranes could speed the biofuels conversion process and reduce cost

ScienceCinema

Hu, Michael

2018-01-26

ORNL researchers have developed a new class of membranes that could enable faster, more cost efficient biofuels production. These membranes are tunable at the nanopore level and have potential uses in separating water from fuel and acid from bio-oils. The membrane materials technology just won an R&D 100 award. ORNL and NREL are partnering, with support from the DOE Bioenergy Technologies Office, to determine the best uses of these membranes to speed the biofuels conversion process. Development of the membranes was funded by DOE BETO and ORNL's Laboratory Directed Research and Development Program.

Understanding the Nature of Learners' Out-of-Class Language Learning Experience with Technology

ERIC Educational Resources Information Center

Lai, Chun; Hu, Xiao; Lyu, Boning

2018-01-01

Out-of-class learning with technology comprises an essential context of second language development. Understanding the nature of out-of-class language learning with technology is the initial step towards safeguarding its quality. This study examined the types of learning experiences that language learners engaged in outside the classroom and the…

Technology and Teaching: Promoting Active Learning Using Individual Response Technology in Large Introductory Psychology Classes

ERIC Educational Resources Information Center

Poirier, Christopher R.; Feldman, Robert S.

2007-01-01

Individual response technology (IRT), in which students use wireless handsets to communicate real-time responses, permits the recording and display of aggregated student responses during class. In comparison to a traditional class that did not employ IRT, students using IRT performed better on exams and held positive attitudes toward the…

Beyond products: services-based strategy.

PubMed

Quinn, J B; Doorley, T L; Paquette, P C

1990-01-01

Services technologies are changing the way companies in every industry--manufacturers and service providers alike--compete. Vertical integration, physical facilities, even a seemingly superior product can no longer assure a competitive edge. Instead, sustainable advantage is more and more likely to come from developing superior capabilities in a few core service skills--and out-sourcing as much of the rest as possible. Within companies, technology is increasing the leverage of service activities: today, more value added comes from design innovations, product image, or other attributes that services create than from the production process. New technologies also let independent enterprises provide world-class services at lower costs than customers could achieve if they performed the activities themselves. These changes have far-reaching implications for how managers structure their organizations and define strategic focus. Companies like Apple, Honda, and Merck show that a less integrated but more focused organization is key to competitive success. They build their strategies around a few highly developed capabilities. And they outsource as many of the other activities in their value chain as possible. To help managers develop an activity-focused strategy, the authors offer a new way to approach competitive analyses, guidelines for determining which activities to outsource and which to retain, and an overview of the risks and rewards of strategic outsourcing. Throughout, they draw on the findings of their three-year study of the major impacts technology has had in the service sector.

Give Your Technology Program a Little "Class"!

ERIC Educational Resources Information Center

Vengersammy, Ormilla

2009-01-01

The Orange County Library System (OCLS) began to offer basic technology classes in July 2000. The computers were funded through a grant awarded by the Bill & Melinda Gates Foundation. Over time, the library staff noticed that the demand for the classes increased, so the offering of classes also increased. When the author arrived at OCLS, her…

Single-Pol Synthetic Aperture Radar Terrain Classification using Multiclass Confidence for One-Class Classifiers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koch, Mark William; Steinbach, Ryan Matthew; Moya, Mary M

2015-10-01

Except in the most extreme conditions, Synthetic aperture radar (SAR) is a remote sensing technology that can operate day or night. A SAR can provide surveillance over a long time period by making multiple passes over a wide area. For object-based intelligence it is convenient to segment and classify the SAR images into objects that identify various terrains and man-made structures that we call “static features.” In this paper we introduce a novel SAR image product that captures how different regions decorrelate at different rates. Using superpixels and their first two moments we develop a series of one-class classification algorithmsmore » using a goodness-of-fit metric. P-value fusion is used to combine the results from different classes. We also show how to combine multiple one-class classifiers to get a confidence about a classification. This can be used by downstream algorithms such as a conditional random field to enforce spatial constraints.« less

Microbial production of plant hormones: Opportunities and challenges.

PubMed

Shi, Tian-Qiong; Peng, Hui; Zeng, Si-Yu; Ji, Rong-Yu; Shi, Kun; Huang, He; Ji, Xiao-Jun

2017-03-04

Plant hormones are a class of organic substances which are synthesized during the plant metabolism. They have obvious physiological effect on plant growth at very low concentrations. Generally, plant hormones are mainly divided into 5 categories: auxins, cytokinins, ethylene, gibberellins (GAs) and abscisic acid (ABA). With the deepening of research, some novel plant hormones such as brassinosteroid and salicylates have been found and identified. The plant hormone products are mainly obtained through plant extraction, chemical synthesis as well as microbial fermentation. However, the extremely low yield in plants and relatively complex chemical structure limit the development of the former 2 approaches. Therefore, more attention has been paid into the microbial fermentative production. In this commentary, the developments and technological achievements of the 2 important plant hormones (GAs and ABA) have been discussed. The discovery, producing strains, fermentation technologies, and their accumulation mechanisms are first introduced. Furthermore, progresses in the industrial mass scale production are discussed. Finally, guidelines for future studies for GAs and ABA production are proposed in light of the current progress, challenges and trends in the field. With the widespread use of plant hormones in agriculture, we believe that the microbial production of plant hormones will have a bright future.

Advanced Turbine Systems annual program review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koop, W.E.

1995-10-01

Integrated High Performance Turbine Engine Technology (IHPTET) is a joint Air Force, Navy, Army, NASA, ARPA, and industry program focused on developing turbine engine technologies, with the goal of doubling propulsion capability by around the turn-of-the-century, and thus providing smaller, lighter, more durable, more affordable turbine engines in the future. IHPTET`s technology development plan for increasing propulsion capability with respect to time is divided into three phases. This phased approach reduces the technological risk of taking one giant leap, and also reduces the {open_quotes}political{close_quotes} risk of not delivering a product for an extended period of time, in that the phasingmore » allows continuous transfer of IHPTET technologies to our warfighters and continuous transfer to the commercial sector (dual-use). The IHPTET program addresses the three major classes of engines: turbofan/turbojet, turboshaft/turboprop, and expendables.« less

Automated optical assembly

NASA Astrophysics Data System (ADS)

Bala, John L.

1995-08-01

Automation and polymer science represent fundamental new technologies which can be directed toward realizing the goal of establishing a domestic, world-class, commercial optics business. Use of innovative optical designs using precision polymer optics will enable the US to play a vital role in the next generation of commercial optical products. The increased cost savings inherent in the utilization of optical-grade polymers outweighs almost every advantage of using glass for high volume situations. Optical designers must gain experience with combined refractive/diffractive designs and broaden their knowledge base regarding polymer technology beyond a cursory intellectual exercise. Implementation of a fully automated assembly system, combined with utilization of polymer optics, constitutes the type of integrated manufacturing process which will enable the US to successfully compete with the low-cost labor employed in the Far East, as well as to produce an equivalent product.

JPRS Report, Science & Technology, Japan.

DTIC Science & Technology

1988-10-06

pollack, herring, smelt, etc.). In the fish that are reproduced by artificial insemination , it is advantageous for egg production when there are many...operations. So far, we have been directing our efforts to the rocket and satellite fields and space environment utilization, and in the future we intend...as well as of bringing to completion Engineering Test Satellite VI for the development of 2-ton class large satellites in the future. We

Design, Development and Application of New, High-Performance Gear Steels

DTIC Science & Technology

2010-02-01

thesis work focused on design principles for advanced carburized bearing steels . He also received a Master of Product Development degree from...Design computational design technology to develop a new class of high-strength, secondary hardening gear steels that are optimized for high-temperature...high contact fatigue resistance, which makes it a candidate for applications such as camshafts and bearings , as well as gear sets. (Printed with

Global knowledge, local implications: a community college's response

NASA Astrophysics Data System (ADS)

Valentin, Marjorie R.; Stroup, Margaret H.; Donnelly, Judith F.

2005-10-01

Three Rivers Community College (TRCC), with federal funding, provided a customized laser program for Joining Technologies in Connecticut, which offers world-class resources for welding and joining applications. This program addresses the shortage of skilled labor in the laser arena, lack of knowledge of fundamental science of applied light, and an increase in nonperforming product. Hiring and retraining a skilled workforce are important and costly issues facing today's small manufacturing companies.

Ionic liquid-based green processes for energy production.

PubMed

Zhang, Suojiang; Sun, Jian; Zhang, Xiaochun; Xin, Jiayu; Miao, Qingqing; Wang, Jianji

2014-11-21

To mitigate the growing pressure on resource depletion and environment degradation, the development of green processes for the production of renewable energy is highly required. As a class of novel and promising media, ionic liquids (ILs) have shown infusive potential applications in energy production. Aiming to offer a critical overview regarding the new challenges and opportunities of ILs for developing green processes of renewable energy, this article emphasises the role of ILs as catalysts, solvents, or electrolytes in three broadly interesting energy production processes from renewable resources, such as CO2 conversion to fuels and fuel additives, biomass pretreatment and conversion to biofuels, as well as solar energy and energy storage. It is expected that this article will stimulate a generation of new ideas and new technologies in IL-based renewable energy production.

A simple approach to industrial laser safety.

PubMed

Lewandowski, Michael A; Hinz, Michael W

2005-02-01

Industrial applications of lasers include marking, welding, cutting, and other material processing. Lasers used in these ways have significant power output but are generally designed to limit operator exposure to direct or scattered laser radiation to harmless levels in order to meet the Federal Laser Product Performance Standard (21CFR1040) for Class 1 laser products. Interesting challenges occur when companies integrate high power lasers into manufacturing or process control equipment. A significant part of the integration process is developing engineering and administrative controls to produce an acceptable level of laser safety while balancing production, maintenance, and service requirements. 3M Company uses a large number of high power lasers in numerous manufacturing processes. Whether the laser is purchased as a Class 1 laser product or whether it is purchased as a Class 4 laser and then integrated into a manufacturing application, 3M Company has developed an industrial laser safety program that maintains a high degree of laser safety while facilitating the rapid and economical integration of laser technology into the manufacturing workplace. This laser safety program is based on the requirements and recommendations contained in the American National Standard for Safe Use of Lasers, ANSI Z136.1. The fundamental components of the 3M program include hazard evaluation, engineering, administrative, and procedural controls, protective equipment, signs and labels, training, and re-evaluation upon change. This program is implemented in manufacturing facilities and has resulted in an excellent history of laser safety and an effective and efficient use of laser safety resources.

Innovation network

PubMed Central

Acemoglu, Daron; Akcigit, Ufuk; Kerr, William R.

2016-01-01

Technological progress builds upon itself, with the expansion of invention in one domain propelling future work in linked fields. Our analysis uses 1.8 million US patents and their citation properties to map the innovation network and its strength. Past innovation network structures are calculated using citation patterns across technology classes during 1975–1994. The interaction of this preexisting network structure with patent growth in upstream technology fields has strong predictive power on future innovation after 1995. This pattern is consistent with the idea that when there is more past upstream innovation for a particular technology class to build on, then that technology class innovates more. PMID:27681628

Application of NX Siemens PLM software in educational process in preparing students of engineering branch

NASA Astrophysics Data System (ADS)

Sadchikova, G. M.

2017-01-01

This article discusses the results of the introduction of computer-aided design NX by Siemens Plm Software to the classes of a higher education institution. The necessity of application of modern information technologies in teaching students of engineering profile and selection of a software product is substantiated. The author describes stages of the software module study in relation to some specific courses, considers the features of NX software, which require the creation of standard and unified product databases. The article also gives examples of research carried out by the students with the various software modules.

Estimating the Technology of Cognitive and Noncognitive Skill Formation*

PubMed Central

Cunha, Flavio; Heckman, James; Schennach, Susanne

2009-01-01

This paper formulates and estimates multistage production functions for child cognitive and noncognitive skills. Output is determined by parental environments and investments at different stages of childhood. We estimate the elasticity of substitution between investments in one period and stocks of skills in that period to assess the benefits of early investment in children compared to later remediation. We establish nonparametric identification of a general class of nonlinear factor models. A by-product of our approach is a framework for evaluating childhood interventions that does not rely on arbitrarily scaled test scores as outputs and recognizes the differential effects of skills in different tasks. Using the estimated technology, we determine optimal targeting of interventions to children with different parental and personal birth endowments. Substitutability decreases in later stages of the life cycle for the production of cognitive skills. It increases in later stages of the life cycle for the production of noncognitive skills. This finding has important implications for the design of policies that target the disadvantaged. For some configurations of disadvantage and outcomes, it is optimal to invest relatively more in the later stages of childhood. PMID:20563300

Propulsion technology needs for advanced space transportation systems. [orbit maneuvering engine (space shuttle), space shuttle boosters

NASA Technical Reports Server (NTRS)

Gregory, J. W.

1975-01-01

Plans are formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems from 1980 to the year 2000. The many possible vehicle applications are reviewed and cataloged to isolate the common threads of primary propulsion technology that satisfies near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Thrust classes of primary propulsion engines that are apparent include: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; and (2) large booster engines of over 250,000 pounds thrust. Major classes of propulsion systems and the important subdivisions of each class are identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements.

Using Mobile Phone Technology in EFL Classes

ERIC Educational Resources Information Center

Sad, Süleyman Nihat

2008-01-01

Teachers of English as a foreign language (EFL) who want to develop successful lessons face numerous challenges, including large class sizes and inadequate instructional materials and technological support. Another problem is unmotivated students who refuse to participate in class activities. According to Harmer (2007), uncooperative and…

3D printed porous ceramic scaffolds for bone tissue engineering: a review.

PubMed

Wen, Yu; Xun, Sun; Haoye, Meng; Baichuan, Sun; Peng, Chen; Xuejian, Liu; Kaihong, Zhang; Xuan, Yang; Jiang, Peng; Shibi, Lu

2017-08-22

This study summarizes the recent research status and development of three-dimensional (3D)-printed porous ceramic scaffolds in bone tissue engineering. Recent literature on 3D-printed porous ceramic scaffolds was reviewed. Compared with traditional processing and manufacturing technologies, 3D-printed porous ceramic scaffolds have obvious advantages, such as enhancement of the controllability of the structure or improvement of the production efficiency. More sophisticated scaffolds were fabricated by 3D printing technology. 3D printed bioceramics have broad application prospects in bone tissue engineering. Through understanding the advantages and limitations of different 3D-printing approaches, new classes of bone graft substitutes can be developed.

Comparison of Optimal Small Spacecraft Micro Electric Propulsion Technologies for Mission Opportunities

NASA Technical Reports Server (NTRS)

Spangelo, Sara

2015-01-01

The goal of this paper is to explore the mission opportunities that are uniquely enabled by U-class Solar Electric Propulsion (SEP) technologies. Small SEP thrusters offers significant advantages relative to existing technologies and will revolutionize the class of mission architectures that small spacecraft can accomplish by enabling trajectory maneuvers with significant change in velocity requirements and reaction wheel-free attitude control. This paper aims to develop and apply a common system-level modeling framework to evaluate these thrusters for relevant upcoming mission scenarios, taking into account the mass, power, volume, and operational constraints of small highly-constrained missions. We will identify the optimal technology for broad classes of mission applications for different U-class spacecraft sizes and provide insights into what constrains the system performance to identify technology areas where improvements are needed.

Quantifying Fugitive Methane Emissions from Natural Gas Production with Mobile Technology

NASA Astrophysics Data System (ADS)

Tsai, T.; Rella, C.; Crosson, E.

2013-12-01

Quantification of fugitive methane (CH4) emissions to determine the environmental impact of natural gas production is challenging with current methods. We present a new mobile method known as the Plume Scanner that can quickly quantify CH4 emissions of point sources. The Plume Scanner is a direct measurement technique which utilizes a mobile Picarro cavity ring-down spectrometer and a gas sampling system based on AirCore technology [1]. As the Plume Scanner vehicle drives through the plume, the air is simultaneously sampled at four different heights, and therefore, the spatial CH4 distribution can be captured (Fig. 1). The flux of the plume is then determined by multiplying the spatial CH4 distribution data with the anemometer measurements. In this way, fugitive emission rates of highly localized sources such as natural gas production pads can be made quickly (~7 min). Verification with controlled CH4 releases demonstrate that under stable atmospheric conditions (Pasquill stability class is C or greater), the Plume Scanner measurements have an error of 2% and a repeatability of 15% [2]. Under unstable atmospheric conditions (Class A or B), the error is 6%, and the repeatability increases to 70% due to the variability of wind conditions. Over two weeks, 275 facilities in the Barnett Shale were surveyed from public roads by sampling the air for elevations in CH4 concentration, and 77% were found leaking. Emissions from 52 sites have been quantified with the Plume Scanner (Fig. 2), and the total emission is 4,900 liters per min (lpm) or 39,000 metric tons/yr CO2e. 1. Karion, A., C. Sweeney, P. Tans, and T. Newberger (2010), AirCore: An innovative atmospheric sampling system, J. Atmos. Oceanic Tech, 27, 1839-1853. 2. F. Pasquill (1961), The estimation of the dispersion of wind borne material, Meterol. Mag., 90(1063), 33-49 Figure 1. Plume Scanner Cartoon Figure 2. Distribution of methane fugitive emissions with error bars associated with the Pasquill stability classes drawn for reference.

42 CFR 416.185 - Process for establishing a new class of new technology IOLs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technology IOLs. 416.185 Section 416.185 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.185 Process for establishing a new class of new technology IOLs. (a) Announcement of deadline for...

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be...

42 CFR 416.185 - Process for establishing a new class of new technology IOLs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology IOLs. 416.185 Section 416.185 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.185 Process for establishing a new class of new technology IOLs. (a) Announcement of deadline for...

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be...

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be considered. CMS uses the...

42 CFR 416.185 - Process for establishing a new class of new technology IOLs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology IOLs. 416.185 Section 416.185 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.185 Process for establishing a new class of new technology IOLs. (a) Announcement of deadline for requests for...

Climate impacts of energy technologies depend on emissions timing

NASA Astrophysics Data System (ADS)

Edwards, Morgan R.; Trancik, Jessika E.

2014-05-01

Energy technologies emit greenhouse gases with differing radiative efficiencies and atmospheric lifetimes. Standard practice for evaluating technologies, which uses the global warming potential (GWP) to compare the integrated radiative forcing of emitted gases over a fixed time horizon, does not acknowledge the importance of a changing background climate relative to climate change mitigation targets. Here we demonstrate that the GWP misvalues the impact of CH4-emitting technologies as mid-century approaches, and we propose a new class of metrics to evaluate technologies based on their time of use. The instantaneous climate impact (ICI) compares gases in an expected radiative forcing stabilization year, and the cumulative climate impact (CCI) compares their time-integrated radiative forcing up to a stabilization year. Using these dynamic metrics, we quantify the climate impacts of technologies and show that high-CH4-emitting energy sources become less advantageous over time. The impact of natural gas for transportation, with CH4 leakage, exceeds that of gasoline within 1-2 decades for a commonly cited 3 W m-2 stabilization target. The impact of algae biodiesel overtakes that of corn ethanol within 2-3 decades, where algae co-products are used to produce biogas and corn co-products are used for animal feed. The proposed metrics capture the changing importance of CH4 emissions as a climate threshold is approached, thereby addressing a major shortcoming of the GWP for technology evaluation.

A Geospatial Comparison of Distributed Solar Heat and Power in Europe and the US

PubMed Central

Norwood, Zack; Nyholm, Emil; Otanicar, Todd; Johnsson, Filip

2014-01-01

The global trends for the rapid growth of distributed solar heat and power in the last decade will likely continue as the levelized cost of production for these technologies continues to decline. To be able to compare the economic potential of solar technologies one must first quantify the types and amount of solar resource that each technology can utilize; second, estimate the technological performance potential based on that resource; and third, compare the costs of each technology across regions. In this analysis, we have performed the first two steps in this process. We use physical and empirically validated models of a total of 8 representative solar system types: non-tracking photovoltaics, 2d-tracking photovoltaics, high concentration photovoltaics, flat-plate thermal, evacuated tube thermal, concentrating trough thermal, concentrating solar combined heat and power, and hybrid concentrating photovoltaic/thermal. These models are integrated into a simulation that uses typical meteorological year weather data to create a yearly time series of heat and electricity production for each system over 12,846 locations in Europe and 1,020 locations in the United States. Through this simulation, systems composed of various permutations of collector-types and technologies can be compared geospatially and temporally in terms of their typical production in each location. For example, we see that silicon solar cells show a significant advantage in yearly electricity production over thin-film cells in the colder climatic regions, but that advantage is lessened in regions that have high average irradiance. In general, the results lead to the conclusion that comparing solar technologies across technology classes simply on cost per peak watt, as is usually done, misses these often significant regional differences in annual performance. These results have implications for both solar power development and energy systems modeling of future pathways of the electricity system. PMID:25474632

A geospatial comparison of distributed solar heat and power in Europe and the US.

PubMed

Norwood, Zack; Nyholm, Emil; Otanicar, Todd; Johnsson, Filip

2014-01-01

The global trends for the rapid growth of distributed solar heat and power in the last decade will likely continue as the levelized cost of production for these technologies continues to decline. To be able to compare the economic potential of solar technologies one must first quantify the types and amount of solar resource that each technology can utilize; second, estimate the technological performance potential based on that resource; and third, compare the costs of each technology across regions. In this analysis, we have performed the first two steps in this process. We use physical and empirically validated models of a total of 8 representative solar system types: non-tracking photovoltaics, 2d-tracking photovoltaics, high concentration photovoltaics, flat-plate thermal, evacuated tube thermal, concentrating trough thermal, concentrating solar combined heat and power, and hybrid concentrating photovoltaic/thermal. These models are integrated into a simulation that uses typical meteorological year weather data to create a yearly time series of heat and electricity production for each system over 12,846 locations in Europe and 1,020 locations in the United States. Through this simulation, systems composed of various permutations of collector-types and technologies can be compared geospatially and temporally in terms of their typical production in each location. For example, we see that silicon solar cells show a significant advantage in yearly electricity production over thin-film cells in the colder climatic regions, but that advantage is lessened in regions that have high average irradiance. In general, the results lead to the conclusion that comparing solar technologies across technology classes simply on cost per peak watt, as is usually done, misses these often significant regional differences in annual performance. These results have implications for both solar power development and energy systems modeling of future pathways of the electricity system.

Camouflage target reconnaissance based on hyperspectral imaging technology

NASA Astrophysics Data System (ADS)

Hua, Wenshen; Guo, Tong; Liu, Xun

2015-08-01

Efficient camouflaged target reconnaissance technology makes great influence on modern warfare. Hyperspectral images can provide large spectral range and high spectral resolution, which are invaluable in discriminating between camouflaged targets and backgrounds. Hyperspectral target detection and classification technology are utilized to achieve single class and multi-class camouflaged targets reconnaissance respectively. Constrained energy minimization (CEM), a widely used algorithm in hyperspectral target detection, is employed to achieve one class camouflage target reconnaissance. Then, support vector machine (SVM), a classification method, is proposed to achieve multi-class camouflage target reconnaissance. Experiments have been conducted to demonstrate the efficiency of the proposed method.

Immunologic responses to therapeutic biologic agents.

PubMed

Purcell, R T; Lockey, R F

2008-01-01

Recombinant protein technology and the subsequent development of biologic agents for pharmacotherapy have greatly improved the treatment of a wide variety of diseases in humans. These products are subject to reactions not previously seen in other drug classes. Additionally, subtle alteration in the manufacture or administration of a biologic agent may cause reactions in subjects who previously tolerated it. This review highlights the unique immunologic reactions that are associated with the more commonly used biologic agents.

Recovery Act--Class 8 Truck Freight Efficiency Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trucks, Daimler

2015-07-26

Daimler Trucks North America completed a five year, $79.6M project to develop and demonstrate a concept vehicle with at least 50% freight efficiency improvement over a weighted average of several drive cycles relative to a 2009 best-in-class baseline vehicle. DTNA chose a very fuel efficient baseline vehicle, the 2009 Freightliner Cascadia with a DD15 engine, yet successfully demonstrated a 115% freight efficiency improvement. DTNA learned a great deal about the various technologies that were incorporated into Super Truck and those that, through down-selection, were discarded. Some of the technologies competed with each other for efficiency, and notably some of themore » technologies complemented each other. For example, we found that Super Truck’s improved aerodynamic drag resulted in improved fuel savings from eCoast, relative to a similar vehicle with worse aerodynamic drag. However, some technologies were in direct competition with each other, namely the predictive technologies which use GPS and 3D digital maps to efficiently manage the vehicles kinetic energy through controls and software, versus hybrid which is a much costlier technology that essentially targets the same inefficiency. Furthermore, the benefits of a comprehensive, integrated powertrain/vehicle approach was proven, in which vast improvements in vehicle efficiency (e.g. lower aero drag and driveline losses) enabled engine strategies such as downrating and downspeeding. The joint engine and vehicle developments proved to be a multiplier-effect which resulted in large freight efficiency improvements. Although a large number of technologies made the selection process and were used on the Super Truck demonstrator vehicle, some of the technologies proved not feasible for series production.« less

40 CFR 82.70 - Nonessential Class II products and exceptions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Nonessential Class II products and... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Ban on Nonessential Products Containing Class I Substances and Ban on Nonessential Products Containing or Manufactured With Class II Substances § 82.70...

40 CFR 82.70 - Nonessential Class II products and exceptions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 18 2012-07-01 2012-07-01 false Nonessential Class II products and... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Ban on Nonessential Products Containing Class I Substances and Ban on Nonessential Products Containing or Manufactured With Class II Substances § 82.70...

40 CFR 82.70 - Nonessential Class II products and exceptions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 18 2014-07-01 2014-07-01 false Nonessential Class II products and... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Ban on Nonessential Products Containing Class I Substances and Ban on Nonessential Products Containing or Manufactured With Class II Substances § 82.70...

40 CFR 82.70 - Nonessential Class II products and exceptions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 18 2013-07-01 2013-07-01 false Nonessential Class II products and... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Ban on Nonessential Products Containing Class I Substances and Ban on Nonessential Products Containing or Manufactured With Class II Substances § 82.70...

The statistical big bang of 1911: ideology, technological innovation and the production of medical statistics.

PubMed

Higgs, W

1996-12-01

This paper examines the relationship between intellectual debate, technologies for analysing information, and the production of statistics in the General Register Office (GRO) in London in the early twentieth century. It argues that controversy between eugenicists and public health officials respecting the cause and effect of class-specific variations in fertility led to the introduction of questions in the 1911 census on marital fertility. The increasing complexity of the census necessitated a shift from manual to mechanised forms of data processing within the GRO. The subsequent increase in processing power allowed the GRO to make important changes to the medical and demographic statistics it published in the annual Reports of the Registrar General. These included substituting administrative sanitary districts for registration districts as units of analysis, consistently transferring deaths in institutions back to place of residence, and abstracting deaths according to the International List of Causes of Death.

The impact of pharmacophore modeling in drug design.

PubMed

Guner, Osman F

2005-07-01

With the reliable use of computer simulations in scientific research, it is possible to achieve significant increases in productivity as well as a reduction in research costs compared with experimental approaches. For example, computer-simulation can substantially enchance productivity by focusing the scientist to better, more informed choices, while also driving the 'fail-early' concept to result in a significant reduction in cost. Pharmacophore modeling is a reliable computer-aided design tool used in the discovery of new classes of compounds for a given therapeutic category. This commentary will briefly review the benefits and applications of this technology in drug discovery and design, and will also highlight its historical evolution. The two most commonly used approaches for pharmacophore model development will be discussed, and several examples of how this technology was successfully applied to identify new potent leads will be provided. The article concludes with a brief outline of the controversial issue of patentability of pharmacophore models.

First-Year Composition Teachers' Uses of New Media Technologies in the Composition Class

ERIC Educational Resources Information Center

Mina, Lilian W.

2014-01-01

As new media technologies emerge and evolve rapidly, the need to make informed decisions about using these technologies in teaching writing increases. This dissertation research study aimed at achieving multiple purposes. The first purpose was to catalog the new media technologies writing teachers use in teaching first-year composition classes.…

Undergraduate Students' Perceptions of Technology-Supported Learning: The Case of an Accounting Class

ERIC Educational Resources Information Center

Flynn, Antoinette; Concannon, Fiona; Bheachain, Caoilfhionn Ni

2005-01-01

The aim of this study is to explore students' perceptions of e-learning in a large undergraduate accounting class environment. E-learning technologies are increasingly widespread; however, they are often employed for technology's sake rather than directed by a pedagogic rationale. This study explores e-learning technology from the student's…

Software Engineering for Human Spaceflight

NASA Technical Reports Server (NTRS)

Fredrickson, Steven E.

2014-01-01

The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

Laser-boosted lightcraft technology demonstrator

NASA Technical Reports Server (NTRS)

Richard, J. C.; Morales, C.; Smith, W. L.; Myrabo, L. N.

1990-01-01

The detailed description and performance analysis of a 1.4 meter diameter Lightcraft Technology Demonstator (LTD) is presented. The launch system employs a 100 MW-class ground-based laser to transmit power directly to an advanced combined-cycle engine that propels the 120 kg LTD to orbit - with a mass ratio of two. The single-stage-to-orbit (SSTO) LTD machine then becomes an autonomous sensor satellite that can deliver precise, high quality information typical of today's large orbital platforms. The dominant motivation behind this study is to provide an example of how laser propulsion and its low launch costs can induce a comparable order-of-magnitude reduction in sensor satellite packaging costs. The issue is simply one of production technology for future, survivable SSTO aerospace vehicles that intimately share both laser propulsion engine and satellite functional hardware.

The Human Space Life Sciences Critical Path Roadmap Project: A Strategy for Human Space Flight through Exploration-Class Missions

NASA Technical Reports Server (NTRS)

Sawin, Charles F.

1999-01-01

The product of the critical path roadmap project is an integrated strategy for mitigating the risks associated with human exploration class missions. It is an evolving process that will assure the ability to communicate the integrated critical path roadmap. Unlike previous reports, this one will not sit on a shelf - it has the full support of the JSC Space and Life Sciences Directorate (SA) and is already being used as a decision making tool (e.g., budget and investigation planning for Shuttle and Space Station mission). Utility of this product depends on many efforts, namely: providing the required information (completed risk data sheets, critical question information, technology data). It is essential to communicate the results of the critical path roadmap to the scientific community - this meeting is a good opportunity to do so. The web site envisioned for the critical path roadmap will provide the capability to communicate to a broader community and to track and update the system routinely.

The Regional Structure of Technical Innovation

NASA Astrophysics Data System (ADS)

O'Neale, Dion

2014-03-01

There is strong evidence that the productivity per capita of cities and regions increases with population. One likely explanation for this phenomenon is that densely populated regions bring together otherwise unlikely combinations of individuals and organisations with diverse, specialised capabilities, leading to increased innovation and productivity. We have used the REGPAT patent database to construct a bipartite network of geographic regions and the patent classes for which those regions display a revealed comparative advantage. By analysing this network, we can infer relationships between different types of patent classes - and hence the structure of (patentable) technology. The network also provides a novel perspective for studying the combinations of technical capabilities in different geographic regions. We investigate measures such as the diversity and ubiquity of innovations within regions and find that diversity (resp. ubiquity) is positively (resp. negatively) correlated with population. We also find evidence of a nested structure for technical innovation. That is, specialised innovations tend to occur only when other more general innovations are already present.

The identification of trends in outgassing technology

NASA Technical Reports Server (NTRS)

Colony, J. A.

1980-01-01

A large amount of chemical analysis data involving identification of outgassing products from spacecraft, experiment modules, and support equipment accumulated at the Goddard Space Flight Center over the past ten years were reduced to a computer compatible format and subjected to a variety of relevant program operations. From these data a list of the most troublesome outgassing species were compiled and several useful and interesting materials' correlations were developed. The frequency of occurrence totals show that in aerospace program, di(2-ethyl hexyl) phthalate (DEHP) is the most often found individual species in outgassing samples and that esters are the leading generic class of compounds. The effectiveness of this data bank was demonstrated by the good correlations between materials and their outgassing products for solar panel bakeouts and cable bakeouts. However, trends in frequency of occurrence of many compounds were demonstrated where no correlation could be established. In the case of the class of compounds called aliphatic hydrocarbons, it is shown that the number of instances of significant outgassing due to these materials is increasing.

Feynman propagator for spin foam quantum gravity.

PubMed

Oriti, Daniele

2005-03-25

We link the notion causality with the orientation of the spin foam 2-complex. We show that all current spin foam models are orientation independent. Using the technology of evolution kernels for quantum fields on Lie groups, we construct a generalized version of spin foam models, introducing an extra proper time variable. We prove that different ranges of integration for this variable lead to different classes of spin foam models: the usual ones, interpreted as the quantum gravity analogue of the Hadamard function of quantum field theory (QFT) or as inner products between quantum gravity states; and a new class of causal models, the quantum gravity analogue of the Feynman propagator in QFT, nontrivial function of the orientation data, and implying a notion of "timeless ordering".

Can Technology Improve Large Class Learning? The Case of an Upper-Division Business Core Class

ERIC Educational Resources Information Center

Stanley, Denise

2013-01-01

Larger classes are often associated with lower student achievement. The author tested the hypothesis that the introduction of personal response systems significantly improves scores in a 250-seat classroom, through the channels of improved attendance and engagement. She focused on how continuous participation with the technology could change…

Summary of development of 70 MW class model superconducting generator--research and development of superconducting for electric power application

NASA Astrophysics Data System (ADS)

Oishi, Ikuo; Nishijima, Kenichi

2002-03-01

A 70 MW class superconducting model generator was designed, manufactured, and tested from 1988 to 1999 as Phase I, which was Japan's national project on applications of superconducting technologies to electric power apparatuses that was commissioned by NEDO as part of New Sunshine Program of AIST and MITI. Phase II then is now being carried out by almost same organization as Phase I. With the development of the 70 MW class superconducting model generator, technologies for a 200 MW class pilot generator were established. The world's largest output (79 MW), world's longest continuous operation (1500 h), and other sufficient characteristics were achieved on the 70 MW class superconducting model generator, and key technologies of design and manufacture required for the 200 MW class pilot generator were established. This project contributed to progress of R&D of power apparatuses. Super-GM has started the next project (Phase II), which shall develop the key technologies for larger-capacity and more-compact machine and is scheduled from 2000 to 2003. Phase II shall be the first step for commercialization of superconducting generator.

Acceptability and characteristics of 124 human bioequivalence studies with active substances classified according to the Biopharmaceutic Classification System

PubMed Central

Ramirez, Elena; Laosa, Olga; Guerra, Pedro; Duque, Blanca; Mosquera, Beatriz; Borobia, Alberto M; Lei, Suhua H; Carcas, Antonio J; Frias, Jesus

2010-01-01

AIM The aim of this study was to evaluate the acceptability of 124 bioequivalence (BE) studies with 80 active substances categorized according to the Biopharmaceutics Classification System (BCS) in order to establish if there were different probabilities of proving BE between the different BCS classes. METHODS We evaluated the differences between pharmaceutical products with active substances from different BCS classes in terms of acceptability, number of subjects in the study (n), the point estimates, and intra- and inter-subject coefficients of variation data from BE studies with generic products. RESULTS Out of 124 BE studies 89 (71.77%) were performed with pharmaceutical products containing active substances classified by the BCS. In all BCS classes there were non-bioequivalent pharmaceutical products: 4 out of 26 (15.38%) in class 1, 14 out of 28 (50%) in class 2, 3 out of 22 (13.63%) in class 3 and 1 out of 13 (7.69%) in class 4. When we removed those pharmaceutical products in which intra-subject variability was higher than predicted (2 in class 1 active substances, 9 in class 2 and 2 in class 3) there were still non-BE pharmaceutical products in classes 1, 2 and 3. CONCLUSIONS Comparisons between pharmaceutical products with active substances from the four BCS classes have not allowed us to define differential characteristics of each class in terms of n, inter and intra-subject variability for Cmax or AUC. Despite the usually employed test dissolution methodology proposed as quality control, pharmaceutical products with active substances from the four classes of BCS showed non-BE studies. PMID:21039763

Technology Development for Human Exploration Beyond LEO in the New Millennium IAA-13-3 Strategies and Plans for Human Mars Missions

NASA Technical Reports Server (NTRS)

Larson, William E.; Lueck, Dale E.; Parrish, Clyde F.; Sanders, Gerald B.; Trevathan, Joseph R.; Baird, R. Scott; Simon, Tom; Peters, T.; Delgado, H. (Technical Monitor)

2001-01-01

As we look forward into the new millennium, the extension of human presence beyond Low-Earth Orbit (LEO) looms large in the plans of NASA. The Agency's Strategic Plan specifically calls out the need to identify and develop technologies for 100 and 1000-day class missions beyond LEO. To meet the challenge of these extended duration missions, it is important that we learn how to utilize the indigenous resources available to us on extraterrestrial bodies. This concept, known as In-Situ Resource Utilization (ISRU) can greatly reduce the launch mass & cost of human missions while reducing the risk. These technologies may also pave the way for the commercial development of space. While no specific target beyond LEO is identified in NASA's Strategic Plan, mission architecture studies have been on-going for the Moon, Mars, Near-Earth Asteroids and Earth/Moon & Earth/Sun Libration Points. As a result of these studies, the NASA Office of Space Flight (Code M) through the Johnson and Kennedy Space Centers, is leading the effort to develop ISRU technologies and systems to meet the current and future needs of human missions beyond LEO and on to Mars. This effort also receives support from the NASA Office of Biological and Physical Research (Code U), the Office of Space Science (Code S), and the Office of Aerospace Technology (Code R). This paper will present unique developments in the area of fuel and oxidizer production, breathing air production, water production, C02 collection, separation of atmospheric gases, and gas liquefaction and storage. A technology overview will be provided for each topic along with the results achieved to date, future development plans, and the mission architectures that these technologies support.

Livestock improvement: art, science, or industry?

PubMed

Harris, D L

1998-09-01

The shift in perspectives about livestock improvement over a 70-yr period is reviewed. The view changes from livestock improvement as an art, through its becoming a science, to its application as a technology in industry. The use of scientific tools in corporate settings for poultry, dairy, and swine breeding usually involves a strong focus on the economics of production, and this focus determines that selection indexes should be used. Such focus has seemed to not have been present in breeding for the extensively managed species and livestock classes but seems needed in order to provide a basis for organization and direction of positive contributions of the breeding segment to the production segment.

NASA/GE quiet engine C acoustic test results

NASA Technical Reports Server (NTRS)

Kazin, S. B.; Pass, J. E.

1974-01-01

The acoustic investigation and evaluation of the C propulsion turbofan engine are discussed. The engine was built as a part of the Quiet Engine Program. The objectives of the program are as follows: (1) to determine the noise levels produced turbofan bypass engines, (2) to demonstrate the technology and innovations which will reduce the production and radiation of noise in turbofan engines, and (3) to acquire experimental acoustic and aerodynamic data for high bypass turbofan engines to provide a better understanding of noise production mechanisms. The goals of the program called for a turbofan engine 15 to 20 PNdB quieter than currently available engines in the same thrust class.

Study on new biomass energy systems

NASA Astrophysics Data System (ADS)

1992-03-01

A biomass energy total system is proposed, and its feasibility is studied. It is the system in which liquid fuel is produced from eucalyptuses planted in the desert area in Australia for production of biomass resource. Eucalyptus tree planting aims at a growth amount of 40 cu m/ha. per year and a practical application area of 45,000ha. CO2 fixation in the biomass plantation becomes 540,000 tons at a 12 ton/ha. rate. Assuming that 0.55 ton of liquid fuel is produced from 1 ton of biomass, a petrochemical plant having a production of 2.5 million bbl/year per unit (equivalent to the fuel used in the 100,000kW class power plant) is needed. Moreover, survey is made on practicality of diesel substitution fuel by esterification of palm oil, and a marked effect of reduction in soot/smoke and particulates in exhaust gas is confirmed. The biomass conversion process technology and the technology for afforestation at the arid land and irrigation are important as future subjects, and the technology development using a bench plant and a pilot plant is needed.

Re-inventing NDE as science — How student ideas will help adapt NDE to the new ecosystem of science and technology

NASA Astrophysics Data System (ADS)

Meyendorf, Norbert

2018-04-01

Industry 4.0 stands for the fourth industrial revolution that is ongoing at present. Industry 4.0 is a terminology generally used in Europe to characterize the integration of production and communication technologies, the so called "smart factory". Lowering costs and efficient in-time production will be possible for low numbers of unique parts, for example by additive manufacturing (3D printing). A significant aspect is also quality and maintainability of these sometimes unique structures and components. NDE has to follow these trends, but introduce the capability of cyber systems into the inspection and maintenance processes. The author initiated in his NDE introductory class student projects where small groups of students had to identify everyday problems that can be solved by NDE techniques and suggest technical solutions based on today's technology. The results where exiting. After discussing the ecosystem and the present situation of NDE as a science, several of these ideas were presented. Let us listen to the ideas and needs of the young generation to re-invent NDE!

40 CFR 82.23 - Transfers of allowances of class II controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., any production, and allowable imports and exports of class II controlled substances reported by the... quantity of the transferor's class II consumption allowances, production allowances, export production... EPA; and (G) For trades of consumption allowances, production allowances, export production allowances...

Reducing the Time and Expenditure: From Prototype to Production in Information Technology Application Development

DTIC Science & Technology

2004-09-01

It also combines the properties of procedures and data into one package . Objects are instances of some class or group of items that exhibit similar...Encapsulation—a means of packaging an object so that only valid operations on it are allowed • Modularity—decomposing a system into cohesive, loosely coupled...Advertise availability during special occasions ( holidays , seasons, etc…) Request for Password -Returns message that e- mail has been sent to

How inverse solver technologies can support die face development and process planning in the automotive industry

NASA Astrophysics Data System (ADS)

Huhn, Stefan; Peeling, Derek; Burkart, Maximilian

2017-10-01

With the availability of die face design tools and incremental solver technologies to provide detailed forming feasibility results in a timely fashion, the use of inverse solver technologies and resulting process improvements during the product development process of stamped parts often is underestimated. This paper presents some applications of inverse technologies that are currently used in the automotive industry to streamline the product development process and greatly increase the quality of a developed process and the resulting product. The first focus is on the so-called target strain technology. Application examples will show how inverse forming analysis can be applied to support the process engineer during the development of a die face geometry for Class `A' panels. The drawing process is greatly affected by the die face design and the process designer has to ensure that the resulting drawn panel will meet specific requirements regarding surface quality and a minimum strain distribution to ensure dent resistance. The target strain technology provides almost immediate feedback to the process engineer during the die face design process if a specific change of the die face design will help to achieve these specific requirements or will be counterproductive. The paper will further show how an optimization of the material flow can be achieved through the use of a newly developed technology called Sculptured Die Face (SDF). The die face generation in SDF is more suited to be used in optimization loops than any other conventional die face design technology based on cross section design. A second focus in this paper is on the use of inverse solver technologies for secondary forming operations. The paper will show how the application of inverse technology can be used to accurately and quickly develop trim lines on simple as well as on complex support geometries.

The Evolving Relationship Between Technology and National Security in China: Innovation, Defense Transformation, and China’s Place in the Global Technology Order

DTIC Science & Technology

2016-02-12

SECURITY CLASSIFICATION OF: This project examined China’s drive to become a world-class defense and dual -use technological and industrial power and...2211 China, science, technology, dual use, defense, security, innovation REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10...Place in the Global Technology Order Report Title This project examined China’s drive to become a world-class defense and dual -use technological and

Results of the pollution reduction technology program for turboprop engines

NASA Technical Reports Server (NTRS)

Mularz, E. J.

1976-01-01

A program was performed to evolve and demonstrate advanced combustor technology aimed at achieving the 1979 EPA standards for turboprop engines (Class P2). The engine selected for this program was the 501-D22A turboprop. Three combustor concepts were designed and tested in a combustor rig at the exact combustor operating conditions of the 50-D22A engine over the EPA landing-takeoff cycle. Each combustor concept exhibited pollutant emissions well below the EPA standards, achieving substantial reductions in unburned hydrocarbons, carbon monoxide, and smoke emissions compared with emissions from the production combustor of this engine. Oxides of nitrogen emissions remained well below the EPA standards, also.

Lightweight high-performance 1-4 meter class spaceborne mirrors: emerging technology for demanding spaceborne requirements

NASA Astrophysics Data System (ADS)

Hull, Tony; Hartmann, Peter; Clarkson, Andrew R.; Barentine, John M.; Jedamzik, Ralf; Westerhoff, Thomas

2010-07-01

Pending critical spaceborne requirements, including coronagraphic detection of exoplanets, require exceptionally smooth mirror surfaces, aggressive lightweighting, and low-risk cost-effective optical manufacturing methods. Simultaneous development at Schott for production of aggressively lightweighted (>90%) Zerodur® mirror blanks, and at L-3 Brashear for producing ultra-smooth surfaces on Zerodur®, will be described. New L-3 techniques for large-mirror optical fabrication include Computer Controlled Optical Surfacing (CCOS) pioneered at L-3 Tinsley, and the world's largest MRF machine in place at L-3 Brashear. We propose that exceptional mirrors for the most critical spaceborne applications can now be produced with the technologies described.

Future of dual-use space awareness technologies

NASA Astrophysics Data System (ADS)

Kislitsyn, Boris V.; Idell, Paul S.; Crawford, Linda L.

2000-10-01

The use of all classes of space systems, whether owned by defense, civil, commercial, scientific, allied or foreign organizations, is increasing rapidly. In turn, the surveillance of such systems and activities in space are of interest to all parties. Interests will only increase in time and with the new ways to exploit the space environment. However, the current space awareness infrastructure and capabilities are not maintaining pace with the demands and advanced technologies being brought online. The use of surveillance technologies, some of which will be discussed in the conference, will provide us the eventual capability to observe and assess the environment, satellite health and status, and the uses of assets on orbit. This provides us a space awareness that is critical to the military operator and to the commercial entrepreneur for their respective successes. Thus the term 'dual-use technologies' has become a reality. For this reason we will briefly examine the background, current, and future technology trends that can lead us to some insights for future products and services.

Traditional and possible technological uses of Digitaria exilis (acha) and Digitaria iburua (iburu): a review.

PubMed

Jideani, I A

1999-01-01

The focus of this article is the traditional and technological uses of two tropical cereal grains: Digitaria exilis (acha) and D. iburua (iburu); with emphasis on their carbohydrate and protein components. Some useful attributes of the grains emanating from present knowledge are discussed. The major classes of traditional foods from these grains are thick and thin porridges; steam cooked products, e.g. couscous; and nonalcoholic and alcoholic beverages. The proteins in these grains are not easily extractable; however, the digestibility of the proteins are better than those of sorghum and millet. The high levels of residue protein in them may have important functional properties. Technologically, acha and iburu can be utilized in ways similar to rice. The two grains require minimal processing due to grain size and location of constituents. Whole acha and iburu grains are now used for quick cooking, non-conventional food products including weaning foods of low bulk density and breakfast cereal with good fiber content. The grains could be used in a wide variety of other products. Cookies, crackers, and popcorn, made in an almost endless array of forms are examples. The breeding of acha and iburu cultivars with good kernel properties is critically important to their utilization potential.

A simple and low-cost platform technology for producing pexiganan antimicrobial peptide in E. coli.

PubMed

Zhao, Chun-Xia; Dwyer, Mirjana Dimitrijev; Yu, Alice Lei; Wu, Yang; Fang, Sheng; Middelberg, Anton P J

2015-05-01

Antimicrobial peptides, as a new class of antibiotics, have generated tremendous interest as potential alternatives to classical antibiotics. However, the large-scale production of antimicrobial peptides remains a significant challenge. This paper reports a simple and low-cost chromatography-free platform technology for producing antimicrobial peptides in Escherichia coli (E. coli). A fusion protein comprising a variant of the helical biosurfactant protein DAMP4 and the known antimicrobial peptide pexiganan is designed by joining the two polypeptides, at the DNA level, via an acid-sensitive cleavage site. The resulting DAMP4(var)-pexiganan fusion protein expresses at high level and solubility in recombinant E. coli, and a simple heat-purification method was applied to disrupt cells and deliver high-purity DAMP4(var)-pexiganan protein. Simple acid cleavage successfully separated the DAMP4 variant protein and the antimicrobial peptide. Antimicrobial activity tests confirmed that the bio-produced antimicrobial peptide has the same antimicrobial activity as the equivalent product made by conventional chemical peptide synthesis. This simple and low-cost platform technology can be easily adapted to produce other valuable peptide products, and opens a new manufacturing approach for producing antimicrobial peptides at large scale using the tools and approaches of biochemical engineering. © 2014 Wiley Periodicals, Inc.

Evaluating the effectiveness of personal response system technology on millennial student learning.

PubMed

McCurry, Mary K; Hunter Revell, Susan M

2011-08-01

As nurse educators, we must explore new technologies that capitalize on the characteristics of millennial learners. One such technology, the personal response system (PRS), is an effective way to promote active learning and increase comprehension. Few nursing studies have examined the benefits of PRS technology on student outcomes. The purpose of this study was to evaluate the effectiveness of PRS technology on learning outcomes in two sections of an undergraduate nursing research course. A crossover design compared class quiz averages between and within groups. Findings related to between and within class quiz scores were mixed, whereas the effectiveness of in-class PRS questions on paper-and-pencil quiz scores and PRS-targeted quiz items was significant. Knowledge gained from this study can be used to enhance our ability to actively engage our technologically savvy undergraduate students. By threading technology into the undergraduate curriculum, learning outcomes may be improved. Copyright 2011, SLACK Incorporated.

Role of Knowledge Management in Development and Lifecycle Management of Biopharmaceuticals.

PubMed

Rathore, Anurag S; Garcia-Aponte, Oscar Fabián; Golabgir, Aydin; Vallejo-Diaz, Bibiana Margarita; Herwig, Christoph

2017-02-01

Knowledge Management (KM) is a key enabler for achieving quality in a lifecycle approach for production of biopharmaceuticals. Due to the important role that it plays towards successful implementation of Quality by Design (QbD), an analysis of KM solutions is needed. This work provides a comprehensive review of the interface between KM and QbD-driven biopharmaceutical production systems as perceived by academic as well as industrial viewpoints. A comprehensive set of 356 publications addressing the applications of KM tools to QbD-related tasks were screened and a query to gather industrial inputs from 17 major biopharmaceutical organizations was performed. Three KM tool classes were identified as having high relevance for biopharmaceutical production systems and have been further explored: knowledge indicators, ontologies, and process modeling. A proposed categorization of 16 distinct KM tool classes allowed for the identification of holistic technologies supporting QbD. In addition, the classification allowed for addressing the disparity between industrial and academic expectations regarding the application of KM methodologies. This is a first of a kind attempt and thus we think that this paper would be of considerable interest to those in academia and industry that are engaged in accelerating development and commercialization of biopharmaceuticals.

Educational technologies in health sciences libraries: teaching technology skills.

PubMed

Hurst, Emily J

2014-01-01

As technology rapidly changes, libraries remain go-to points for education and technology skill development. In academic health sciences libraries, trends suggest librarians provide more training on technology topics than ever before. While education and training have always been roles for librarians, providing technology training on new mobile devices and emerging systems requires class creation and training capabilities that are new to many librarians. To appeal to their users, many health sciences librarians are interested in developing technology-based classes. This column explores the question: what skills are necessary for developing and teaching technology in an academic health sciences library setting?

Educational Technologies in Health Science Libraries: Teaching Technology Skills

PubMed Central

Hurst, Emily J.

2014-01-01

As technology rapidly changes, libraries remain go-to points for education and technology skill development. In academic health sciences libraries, trends suggest librarians provide more training on technology topics than ever before. While education and training have always been roles for librarians, providing technology training on new mobile devices and emerging systems requires class creation and training capabilities that are new to many. To appeal to their users, many health sciences librarians are interested in developing technology-based classes. This column explores the question: what skills are necessary for developing and teaching technology in an academic health sciences library setting? PMID:24528269

Bacteriocins as food preservatives: Challenges and emerging horizons.

PubMed

Johnson, Eldin Maliyakkal; Jung, Dr Yong-Gyun; Jin, Dr Ying-Yu; Jayabalan, Dr Rasu; Yang, Dr Seung Hwan; Suh, Joo Won

2017-09-07

The increasing demand for fresh-like food products and the potential health hazards of chemically preserved and processed food products have led to the advent of alternative technologies for the preservation and maintenance of the freshness of the food products. One such preservation strategy is the usage of bacteriocins or bacteriocins producing starter cultures for the preservation of the intended food matrixes. Bacteriocins are ribosomally synthesized smaller polypeptide molecules that exert antagonistic activity against closely related and unrelated group of bacteria. This review is aimed at bringing to lime light the various class of bacteriocins mainly from gram positive bacteria. The desirable characteristics of the bacteriocins which earn them a place in food preservation technology, the success story of the same in various food systems, the various challenges and the strategies employed to put them to work efficiently in various food systems has been discussed in this review. From the industrial point of view various aspects like the improvement of the producer strains, downstream processing and purification of the bacteriocins and recent trends in engineered bacteriocins has also been briefly discussed in this review.

Investigation of the Values Found in Primary Education Science and Technology Textbooks in Turkey

ERIC Educational Resources Information Center

Benzer, Elif

2013-01-01

In this study, the value types of 6, 7 and 8 class text books which take place in the primary education science and technology education program, have been targeted for investigation for the present rate of these values in different textbooks, and, whether they changed in accordance with class variables (class, subject content, and divisions of…

Ribosome display: next-generation display technologies for production of antibodies in vitro.

PubMed

He, Mingyue; Khan, Farid

2005-06-01

Antibodies represent an important and growing class of biologic research reagents and biopharmaceutical products. They can be used as therapeutics in a variety of diseases. With the rapid expansion of proteomic studies and biomarker discovery, there is a need for the generation of highly specific binding reagents to study the vast number of proteins encoded by the genome. Display technologies provide powerful tools for obtaining antibodies. Aside from the preservation of natural antibody repertoires, they are capable of exploiting diversity by DNA recombination to create very large libraries for selection of novel molecules. In contrast to in vivo immunization processes, display technologies allow selection of antibodies under in vitro-defined selection condition(s), resulting in enrichment of antibodies with desired properties from large populations. In addition, in vitro selection enables the isolation of antibodies against difficult antigens including self-antigens, and this can be applied to the generation of human antibodies against human targets. Display technologies can also be combined with DNA mutagenesis for antibody evolution in vitro. Some methods are amenable to automation, permitting high-throughput generation of antibodies. Ribosome display is considered as representative of the next generation of display technologies since it overcomes the limitations of cell-based display methods by using a cell-free system, offering advantages of screening larger libraries and continuously expanding new diversity during selection. Production of display-derived antibodies can be achieved by choosing one of a variety of prokaryotic and eukaryotic cell-based expression systems. In the near future, cell-free protein synthesis may be developed as an alternative for large-scale generation of antibodies.

Factors associated with patterns of mobile technology use among persons who inject drugs.

PubMed

Collins, Kelly M; Armenta, Richard F; Cuevas-Mota, Jazmine; Liu, Lin; Strathdee, Steffanie A; Garfein, Richard S

2016-01-01

New and innovative methods of delivering interventions are needed to further reduce risky behaviors and increase overall health among persons who inject drugs (PWID). Mobile health (mHealth) interventions have potential for reaching PWID; however, little is known about mobile technology use (MTU) in this population. In this study, the authors identify patterns of MTU and identified factors associated with MTU among a cohort of PWID. Data were collected through a longitudinal cohort study examining drug use, risk behaviors, and health status among PWID in San Diego, California. Latent class analysis (LCA) was used to define patterns of MTU (i.e., making voice calls, text messaging, and mobile Internet access). Multinomial logistic regression was then used to identify demographic characteristics, risk behaviors, and health indicators associated with mobile technology use class. In LCA, a 4-class solution fit the data best. Class 1 was defined by low MTU (22%, n = 100); class 2, by PWID who accessed the Internet using a mobile device but did not use voice or text messaging (20%, n = 95); class 3, by primarily voice, text, and connected Internet use (17%, n = 91); and class 4, by high MTU (41%, n = 175). Compared with low MTU, high MTU class members were more likely to be younger, have higher socioeconomic status, sell drugs, and inject methamphetamine daily. The majority of PWID in San Diego use mobile technology for voice, text, and/or Internet access, indicating that rapid uptake of mHealth interventions may be possible in this population. However, low ownership and use of mobile technology among older and/or homeless individuals will need to be considered when implementing mHealth interventions among PWID.

Efforts to Handle Waste through Science, Environment, Technology and Society (SETS)

NASA Astrophysics Data System (ADS)

Rahmawati, D.; Rahman, T.; Amprasto, A.

2017-09-01

This research to identify the attempt to deal with the waste through a learning SETS to facilitate troubleshooting and environmentally conscious high school students. The research method is weak experiment, with the design of the study “The One-group pretest-Posttest Design”. The population used in this study is an entire senior high school class in Ciamis Regency of Indonesia many as 10 classes totaling 360 students. The sample used in this study were 1 class. Data collected through pretest and posttest to increase problem-solving skills and environmental awareness of students. Instruments used in this research is to test the ability to solve the problem on the concept of Pollution and Environmental Protection, in the form of essays by 15 matter, the attitude scale questionnaire of 28 statements. The analysis N-gain average showed that the SETS problem-solving skills and environmental awareness of students in the medium category. In addition, students’ creativity in finding out pretty good waste management by creating products that are aesthetically valuable and economic appropriately.

Low Cost, Upper Stage-Class Propulsion

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The low cost, upper stage-class propulsion (LCUSP) element will develop a high strength copper alloy additive manufacturing (AM) process as well as critical components for an upper stage-class propulsion system that will be demonstrated with testing. As manufacturing technologies have matured, it now appears possible to build all the major components and subsystems of an upper stage-class rocket engine for substantially less money and much faster than traditionally done. However, several enabling technologies must be developed before that can happen. This activity will address these technologies and demonstrate the concept by designing, manufacturing, and testing the critical components of a rocket engine. The processes developed and materials' property data will be transitioned to industry upon completion of the activity. Technologies to enable the concept are AM copper alloy process development, AM post-processing finishing to minimize surface roughness, AM material deposition on existing copper alloy substrate, and materials characterization.

Class Construction: White Working-Class Student Identity in the New Millennium

ERIC Educational Resources Information Center

Freie, Carrie

2007-01-01

"Class Construction" explores class, racial, and gender identity construction among white, working-class students. Delving into River City High School, Freie asks what happens to the adolescent children of working-class families when economic changes such as globalization and technological advancements have altered the face of working-class jobs.…

Impact of telecommunication technologies on the middle class formation

NASA Astrophysics Data System (ADS)

Khusnullova, A.; Absalyamova, S.; Sakhapov, R.; Mukhametgalieva, Ch

2017-12-01

The article is devoted to the study of the impact of the information economy on the formation of the middle class. The paper identifies factors contributing to the increase in the share of the middle class in the transition to the information economy. The positive synergetic influence of telecommunication technologies on the formation of the middle class is considered through a possibility of using virtual spaces for labor and educational activities, a possibility of obtaining high returns in the form of dividends on intellectual capital, a qualitative change in the structure of needs, an access to new types of information services, etc. Authors develop a complex model of research of the middle class in the information economy, differing from those available using an expanded list of criteria. In addition to such widely used criteria as income level, level of education and self-identification, the criterion "degree of involvement in the information society" was introduced. The study substantiates that the transition to the information economy made an access to information and communication technologies one of the most significant criteria for social differentiation of society. On the basis of the model, an econometric estimate of the middle class has been carried out, which makes it possible to reveal the share of the middle class in modern society, dynamics of its development, as well as multicollinearity between spending on education, the Gini coefficient, access to information and telecommunication technologies and the size of the middle class.

Microtools for single-cell analysis in biopharmaceutical development and manufacturing.

PubMed

Love, Kerry Routenberg; Bagh, Sangram; Choi, Jonghoon; Love, J Christopher

2013-05-01

Biologic drugs are promoting growth in the biopharmaceutical industry. Despite the clinical benefits of these drugs, the time and costs required to bring new biologics to market still are substantial. Three key challenges, among others, persist in the development of biologic drugs: namely, establishing product similarity, product toxicity, and global accessibility. New classes of microtools that facilitate the isolation and interrogation of single cells have the potential to impact each of these challenges. This opinion considers recent examples of microtools with demonstrated or potential utility to address problems in these areas. Integrating these advanced technologies into the development of new biologics could greatly reduce time and costs required to bring alternative products to market, and thus expand their global availability. Copyright © 2013 Elsevier Ltd. All rights reserved.

Generating a Generation of Proteasome Inhibitors: From Microbial Fermentation to Total Synthesis of Salinosporamide A (Marizomib) and Other Salinosporamides

PubMed Central

Potts, Barbara C.; Lam, Kin S.

2010-01-01

The salinosporamides are potent proteasome inhibitors among which the parent marine-derived natural product salinosporamide A (marizomib; NPI-0052; 1) is currently in clinical trials for the treatment of various cancers. Methods to generate this class of compounds include fermentation and natural products chemistry, precursor-directed biosynthesis, mutasynthesis, semi-synthesis, and total synthesis. The end products range from biochemical tools for probing mechanism of action to clinical trials materials; in turn, the considerable efforts to produce the target molecules have expanded the technologies used to generate them. Here, the full complement of methods is reviewed, reflecting remarkable contributions from scientists of various disciplines over a period of 7 years since the first publication of the structure of 1. PMID:20479958

Understanding Class A and Pathogen Equivalency

EPA Science Inventory

Over the last several years, there has been a growing interest in using alternative technologies to produce Class A biosolids from municipal sludge. The 503 regulations include provisions for permitting the use of alternative and innovative treatment technologies. Under these pr...

Laser-boosted lightcraft technology demonstrator

NASA Technical Reports Server (NTRS)

Antonison, M.; Myrabo, Leik; Chen, S.; Decusatis, C.; Kusche, K.; Minucci, M.; Moder, J.; Morales, C.; Nelson, C.; Richard, J.

1989-01-01

The ultimate goal for this NASA/USRA-sponsored 'Apollo Lightcraft Project' is to develop a revolutionary manned launch vehicle technology that can potentially reduce payload transport costs by a factor of 1000 below the space shuttle orbiter. The Rensellaer design team proposes to utilize advanced, highly energetic, beamed-energy sources (laser, microwave) and innovative combined-cycle (airbreathing/rocket) engines to accomplish this goal. This year's effort, the detailed description and performance analysis of an unmanned 1.4-m Lightcraft Technology Demonstrator (LTD) drone, is presented. The novel launch system employs a 100-MW-class ground-based laser to transmit power directly to an advanced combined-cycle engine that propels the 120-kg LTD to orbit, with a mass ratio of two. The single-stage-to-orbit (SSTO) LTD machine then becomes an autonomous sensor satellite that can deliver precise, high-quality information typical of today's large orbital platforms. The dominant motivation behind this study is to provide an example of how laser propulsion and its low launch costs can induce a comparable order-of-magnitude reduction in sensor satellite packaging costs. The issue is simply one of production technology for future, survivable SSTO aerospace vehicles that intimately share both laser propulsion engine and satellite functional hardware. A mass production cost goal of 10(exp 3)/kg for the LTD vehicle is probably realizable.

(abstract) Formal Inspection Technology Transfer Program

NASA Technical Reports Server (NTRS)

Welz, Linda A.; Kelly, John C.

1993-01-01

A Formal Inspection Technology Transfer Program, based on the inspection process developed by Michael Fagan at IBM, has been developed at JPL. The goal of this program is to support organizations wishing to use Formal Inspections to improve the quality of software and system level engineering products. The Technology Transfer Program provides start-up materials and assistance to help organizations establish their own Formal Inspection program. The course materials and certified instructors associated with the Technology Transfer Program have proven to be effective in classes taught at other NASA centers as well as at JPL. Formal Inspections (NASA tailored Fagan Inspections) are a set of technical reviews whose objective is to increase quality and reduce the cost of software development by detecting and correcting errors early. A primary feature of inspections is the removal of engineering errors before they amplify into larger and more costly problems downstream in the development process. Note that the word 'inspection' is used differently in software than in a manufacturing context. A Formal Inspection is a front-end quality enhancement technique, rather than a task conducted just prior to product shipment for the purpose of sorting defective systems (manufacturing usage). Formal Inspections are supporting and in agreement with the 'total quality' approach being adopted by many NASA centers.

Product-based Safety Certification for Medical Devices Embedded Software.

PubMed

Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

2015-01-01

Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

Technology Usage among Community College Faculty in First-Time-in-College Classes: A Call to Standardization

ERIC Educational Resources Information Center

Goomas, David T.

2013-01-01

Technology in higher education has played an increasingly dramatic role, particularly on community college campuses, with emphasis on how to provide better services to students via the use of technology. This report examines the challenge for faculty teaching first-time-in-college (FTIC) classes at El Centro College of the Dallas County Community…

Effects of Game Technology on Elementary Student Learning in Mathematics

ERIC Educational Resources Information Center

Shin, Namsoo; Sutherland, LeeAnn M.; Norris, Cathleen A.; Soloway, Elliot

2012-01-01

This paper reports the effects of game technology on student learning in mathematics as investigated in two data sets collected from slightly different subjects. In the first, 41 second graders (7 or 8 years old) from two classes used either a technology-based game or a paper-based game for 5 weeks. For the next 13 weeks, both classes used a…

Entry, Descent and Landing Systems Analysis: Exploration Class Simulation Overview and Results

NASA Technical Reports Server (NTRS)

DwyerCianciolo, Alicia M.; Davis, Jody L.; Shidner, Jeremy D.; Powell, Richard W.

2010-01-01

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and exploration or human-scale missions. The year one exploration class mission activity considered technologies capable of delivering a 40-mt payload. This paper provides an overview of the exploration class mission study, including technologies considered, models developed and initial simulation results from the EDL-SA year one effort.

13 CFR 121.1204 - What are the procedures for requesting and granting waivers?

Code of Federal Regulations, 2011 CFR

2011-01-01

... granting waivers? (a) Waivers for classes of products. (1) SBA may, at its own initiative, examine a class..., association, or Federal agency may submit a request for a waiver for a particular class of products. Requests... Administration, 409 3rd Street SW., Washington, DC 20416. (3) Requests for a waiver of a class of products need...

Classification of natural products as sources of drugs according to the biopharmaceutics drug disposition classification system (BDDCS).

PubMed

Li, Ji; Larregieu, Caroline A; Benet, Leslie Z

2016-12-01

Natural products (NPs) are compounds that are derived from natural sources such as plants, animals, and micro-organisms. Therapeutics has benefited from numerous drug classes derived from natural product sources. The Biopharmaceutics Drug Disposition Classification System (BDDCS) was proposed to serve as a basis for predicting the importance of transporters and enzymes in determining drug bioavailability and disposition. It categorizes drugs into one of four biopharmaceutical classes according to their water solubility and extent of metabolism. The present paper reviews 109 drugs from natural product sources: 29% belong to class 1 (high solubility, extensive metabolism), 22% to class 2 (low solubility, extensive metabolism), 40% to class 3 (high solubility, poor metabolism), and 9% to class 4 (low solubility, poor metabolism). Herein we evaluated the characteristics of NPs in terms of BDDCS class for all 109 drugs as wells as for subsets of NPs drugs derived from plant sources as antibiotics. In the 109 NPs drugs, we compiled 32 drugs from plants, 50% (16) of total in class 1, 22% (7) in class 2 and 28% (9) in class 3, none found in class 4; Meantime, the antibiotics were found 5 (16%) in class 2, 22 (71%) in class 3, and 4 (13%) in class 4; no drug was found in class 1. Based on this classification, we anticipate BDDCS to serve as a useful adjunct in evaluating the potential characteristics of new natural products. Copyright © 2016 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Additive manufacturing techniques for the production of tissue engineering constructs.

PubMed

Mota, Carlos; Puppi, Dario; Chiellini, Federica; Chiellini, Emo

2015-03-01

'Additive manufacturing' (AM) refers to a class of manufacturing processes based on the building of a solid object from three-dimensional (3D) model data by joining materials, usually layer upon layer. Among the vast array of techniques developed for the production of tissue-engineering (TE) scaffolds, AM techniques are gaining great interest for their suitability in achieving complex shapes and microstructures with a high degree of automation, good accuracy and reproducibility. In addition, the possibility of rapidly producing tissue-engineered constructs meeting patient's specific requirements, in terms of tissue defect size and geometry as well as autologous biological features, makes them a powerful way of enhancing clinical routine procedures. This paper gives an extensive overview of different AM techniques classes (i.e. stereolithography, selective laser sintering, 3D printing, melt-extrusion-based techniques, solution/slurry extrusion-based techniques, and tissue and organ printing) employed for the development of tissue-engineered constructs made of different materials (i.e. polymeric, ceramic and composite, alone or in combination with bioactive agents), by highlighting their principles and technological solutions. Copyright © 2012 John Wiley & Sons, Ltd.

Evaluation of solar electric propulsion technologies for discovery class missions

NASA Technical Reports Server (NTRS)

Oh, David Y.

2005-01-01

A detailed study examines the potential benefits that advanced electric propulsion (EP) technologies offer to the cost-capped missions in NASA's Discovery program. The study looks at potential cost and performance benefits provided by three EP technologies that are currently in development: NASA's Evolutionary Xenon Thruster (NEXT), an Enhanced NSTAR system, and a Low Power Hall effect thruster. These systems are analyzed on three straw man Discovery class missions and their performance is compared to a state of the art system using the NSTAR ion thruster. An electric propulsion subsystem cost model is used to conduct a cost-benefit analysis for each option. The results show that each proposed technology offers a different degree of performance and/or cost benefit for Discovery class missions.

Factors driving spatial and temporal variation in production and production/biomass ratio of stream-resident brown trout (Salmo trutta) in Cantabrian streams

USGS Publications Warehouse

Lobon-Cervia, J.; Gonzalez, G.; Budy, P.

2011-01-01

1.The objective was to identify the factors driving spatial and temporal variation in annual production (PA) and turnover (production/biomass) ratio (P/BA) of resident brown trout Salmo trutta in tributaries of the Rio Esva (Cantabrian Mountains, Asturias, north-western Spain). We examined annual production (total production of all age-classes over a year) (PA) and turnover (P/BA) ratios, in relation to year-class production (production over the entire life time of a year-class) (PT) and turnover (P/BT) ratio, over 14years at a total of 12 sites along the length of four contrasting tributaries. In addition, we explored whether the importance of recruitment and site depth for spatial and temporal variations in year-class production (PT), elucidated in previous studies, extends to annual production. 2.Large spatial (among sites) and temporal (among years) variation in annual production (range 1.9-40.3gm-2 per year) and P/BA ratio (range 0.76-2.4per year) typified these populations, values reported here including all the variation reported globally for salmonids streams inhabited by one or several species. 3.Despite substantial differences among streams and sites in all production attributes, when all data were pooled, annual (PA) and year-class production (PT) and annual (P/BA) and year-class P/BT ratios were tightly linked. Annual (PA) and year-class production (PT) were similar but not identical, i.e. PT=0.94 PA, whereas the P/BT ratios were 4+P/BA ratios. 4.Recruitment (Rc) and mean annual density (NA) were major density-dependent drivers of production and their relationships were described by simple mathematical models. While year-class production (PT) was determined (R2=70.1%) by recruitment (Rc), annual production (PA) was determined (R2=60.3%) by mean annual density (NA). In turn, variation in recruitment explained R2=55.2% of variation in year-class P/BT ratios, the latter attaining an asymptote at P/BT=6 at progressively higher levels of recruitment. Similarly, variations in mean annual density (NA) explained R2=52.1% of variation in annual P/BA, the latter reaching an asymptote at P/BA=2.1. This explained why P/BT is equal to P/BA plus the number of year-classes at high but not at low densities. 5.Site depth was a major determinant of spatial (among sites) variation in production attributes. All these attributes described two-phase trajectories with site depth, reaching a maximum at sites of intermediate depth and declining at shallower and deeper sites. As a consequence, at sites where recruitment and mean annual density reached minimum or maximum values, annual (PA) and year-class production (PT) and annual (P/BA) and year-class P/BT ratios also reached minimum and maximum values. ?? 2011 Blackwell Publishing Ltd.

With Great Measurements Come Great Results

NASA Astrophysics Data System (ADS)

Williams, Carl

Measurements are the foundation for science and modern life. Technologies we take for granted every day depend on them-cell phones, CAT scans, pharmaceuticals, even sports equipment. Metrology, or measurement science, determines what industry can make reliably and what they cannot. At the National Institute of Standards and Technology (NIST) we specialize in making world class measurements that an incredibly wide range of industries use to continually improve their products - computer chips with nanoscale components, atomic clocks that you can hold in your hand, lasers for both super-strong welds and delicate eye surgeries. Think of all the key technologies developed over the last 100 years and better measurements, standards, or analysis techniques played a role in making them possible. NIST works collaboratively with industry researchers on the advanced metrology for tomorrow's technologies. A new kilogram based on electromagnetic force, cars that weigh half as much but are just as strong, quantum computers, personalized medicine, single atom devices - it's all happening in our labs now. This talk will focus on how metrology creates the future.

Influenza antiviral therapeutics.

PubMed

Mayburd, Anatoly L

2010-01-01

In this review we conducted a landscaping study of the therapeutic anti-influenza agents, limiting the scope by exclusion of vaccines. The resulting 2800 patent publications were classified into 23 distinct technological sectors. The mechanism of action, the promise and drawbacks of the corresponding technological sectors were explored on comparative basis. A set of quantitative parameters was defined based on landscaping procedure that appears to correlate with the practical success of a given class of therapeutics. Thus, the sectors not considered promising from the mechanistic side were also displaying low value of the classifying parameters. The parameters were combined into a probabilistic Marketing Prediction Score, assessing a likelihood of a given sector to produce a marketable product. The proposed analytical methodology may be useful for automatic search and assessment of technologies for the goals of acquisition, investment and competitive bidding. While not being a substitute for an expert evaluation, it provides an initial assessment suitable for implementation with large-scale automated landscaping.

Deciphering the therapeutic stem cell strategies of large and midsize pharmaceutical firms.

PubMed

Vertès, Alain A

2014-01-01

The slow adoption of cytotherapeutics remains a vexing hurdle given clinical progress achieved to date with a variety of stem cell lineages. Big and midsize pharmaceutical companies as an asset class still delay large-scale investments in this arena until technological and market risks will have been further reduced. Nonetheless, a handful of stem cell strategic alliance and licensing transactions have already been implemented, indicating that progress is actively monitored, although most of these involve midsize firms. The greatest difficulty is, perhaps, that the regenerative medicine industry is currently only approaching the point of inflexion of the technology development S-curve, as many more clinical trials read out. A path to accelerating technology adoption is to focus on innovation outliers among healthcare actors. These can be identified by analyzing systemic factors (e.g., national science policies and industry fragmentation) and intrinsic factors (corporate culture, e.g., nimble decision-making structures; corporate finance, e.g., opportunity costs and ownership structure; and operations, e.g., portfolio management strategies, threats on existing businesses and patent expirations). Another path is to accelerate the full clinical translation and commercialization of an allogeneic cytotherapeutic product in any indication to demonstrate the disease-modifying potential of the new products for treatment and prophylaxis, ideally for a large unmet medical need such as dry age-related macular degeneration, or for an orphan disease such as biologics-refractory acute graft-versus-host disease. In times of decreased industry average research productivities, regenerative medicine products provide important prospects for creating new franchises with a market potential that could very well mirror that achieved with the technology of monoclonal antibodies.

Spray Forming Aluminum - Final Report (Phase II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. D. Leon

1999-07-08

The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Incmore » developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.« less

Destruction of problematic airborne contaminants by hydrogen reduction using a Catalytically Active, Regenerable Sorbent (CARS)

NASA Technical Reports Server (NTRS)

Thompson, John O.; Akse, James R.

1993-01-01

Thermally regenerable sorbent beds were demonstrated to be a highly efficient means for removal of toxic airborne trace organic contaminants aboard spacecraft. The utilization of the intrinsic weight savings available through this technology was not realized since many of the contaminants desorbed during thermal regeneration are poisons to the catalytic oxidizer or form highly toxic oxidation by-products in the Trace Contaminant Control System (TCCS). Included in this class of compounds are nitrogen, sulfur, silicon, and halogen containing organics. The catalytic reduction of these problematic contaminants using hydrogen at low temperatures (200-300 C) offers an attractive route for their destruction since the by-products of such reactions, hydrocarbons and inorganic gases, are easily removed by existing technology. In addition, the catalytic oxidizer can be operated more efficiently due to the absence of potential poisons, and any posttreatment beds can be reduced in size. The incorporation of the catalyst within the sorbent bed further improves the system's efficiency. The demonstration of this technology provides the basis for an efficient regenerable TCCS for future NASA missions and can be used in more conventional settings to efficiently remove environmental pollutants.

Cell-Free Systems Based on CHO Cell Lysates: Optimization Strategies, Synthesis of “Difficult-to-Express” Proteins and Future Perspectives

PubMed Central

Thoring, Lena; Wüstenhagen, Doreen A.; Borowiak, Maria; Stech, Marlitt; Sonnabend, Andrei; Kubick, Stefan

2016-01-01

Nowadays, biotechnological processes play a pivotal role in target protein production. In this context, Chinese Hamster Ovary (CHO) cells are one of the most prominent cell lines for the expression of recombinant proteins and revealed as a safe host for nearly 40 years. Nevertheless, the major bottleneck of common in vivo protein expression platforms becomes obvious when looking at the production of so called “difficult-to-express” proteins. This class of proteins comprises in particular several ion channels and multipass membrane proteins as well as cytotoxic proteins. To enhance the production of “difficult-to-express” proteins, alternative technologies were developed, mainly based on translationally active cell lysates. These so called “cell-free” protein synthesis systems enable an efficient production of different classes of proteins. Eukaryotic cell-free systems harboring endogenous microsomal structures for the synthesis of functional membrane proteins and posttranslationally modified proteins are of particular interest for future applications. Therefore, we present current developments in cell-free protein synthesis based on translationally active CHO cell extracts, underlining the high potential of this platform. We present novel results highlighting the optimization of protein yields, the synthesis of various “difficult-to-express” proteins and the cotranslational incorporation of non-standard amino acids, which was exemplarily demonstrated by residue specific labeling of the glycoprotein Erythropoietin and the multimeric membrane protein KCSA. PMID:27684475

The Influence of Information Technology on Student's Behavioural Nature in the Class Room

ERIC Educational Resources Information Center

Ali, Liaqat

2018-01-01

The use of mobile phones and other gadgets in the university class room is becoming a culture in the modern age of technology. Some students use this technology for the purpose of information only. However, it was noted that others use mobile phone to receive messages through different applications such as WhatsApp, Facebook, Instagram and Viber.…

Current Status of Study on Hydrogen Production with Space Solar Power Systems (SSPS)

NASA Astrophysics Data System (ADS)

Mori, M.; Kagawa, H.; Nagayama, H.; Saito, Y.

2004-12-01

Japan Aerospace Exploration Agency (JAXA) has been conducting studies on Space Solar Power Systems (SSPS) using microwave and laser beams for years since FY1998 organizing a special committee and working groups. The microwave based SSPS are huge solar power systems that generate GW power by solar cells. The electric power is transmitted via microwave from the SSPS to the ground. In the laser based SSPS, a solar condenser equipped with lenses or mirrors and laser-generator would be put into orbit. A laser beam would be sent to Earth-based hydrogen generating device. We are proposing a roadmap that consists of a stepwise approach to achieve commercial SSPS in 20-30 years. The first step is 50kW class Technology Demonstration Satellite to demonstrate microwave power transmission. The second step is to demonstrate robotic assembly of 10MW class large scale flexible structure in space on ISS co-orbit. The third step is to build a prototype SSPS in GEO. The final step is to build commercial SSPS in GEO. We continue the study of SSPS concepts and architectures, technology flight demonstration and major technology development. System design of tens of kW class Technology Demonstration Satellite and conceptual study of 10MW class demonstration system on ISS co-orbit are also conducted. Several key technologies which are needed to be developed in appropriate R&D roadmap, such as high-voltage solar cell array, fiber type of direct solar pumping solid-state laser, high efficiency magnetron, thermal control technology and control technology of large scale flexible structure etc. are also investigated. In the study of concept design of commercial SSPS mentioned above, we have studied some configurations of both microwave based SSPS and laser based SSPS. In case of microwave based SSPS, the solar energy must be converted to electricity and then converted to a microwave beam. The on-ground rectifying antenna will collect the microwave beam and convert it to electricity to connect to commercial power grids. From the past experiences of the conceptual design of the1GW class SSPS, it is clear that system with the mirrors and modularized unit which integrated solar cells and microwave power transmitters is promising. In this type of SSPS, the solar lights are directed to the energy conversion unit integrated solar cells and microwave power transmitters using mirrors. The key factor in designing systems is feasibility of thermal system. Considering above these factors, some reference models are being considered now. FY2003 reference model is the model for formation flight without the center truss which connect to primary mirrors to energy conversion unit. Using this model as basis, we are carrying out examination from various viewpoints aiming at the cost minimum to build and maintain the systems. In case of laser based SSPS, the laser beam would be directly produced from the solar light using the direct solar pumping solid-state laser device. This laser beams would be collected on ground and used to produce hydrogen from seawater. The receiving / energy conversion station is settled on an ocean, and producing hydrogen can be stored and transported by ships to consumers. In designing laser based SSPS, conversion efficiency of the direct solar pumping solid-state laser and feasibility of thermal system are critical factors. Since magnification of solar concentrator is very high, improvement of thermal control system is important. Feasibility of its ground facilities and production technology of hydrogen using laser beams has been also studied. Both hydrogen generating systems with photo-catalyst device and electrolytic ones have been examined. From the past experiences of this study, high efficient electric power generating technology using the solar cell which suited the wavelength of laser is promising. The life cycle cost model of laser based SSPS was created and evaluated its validity. Sensitivity analysis of laser based SSPS are also continued aiming at hydrogen generating cost of around 20 cent per Nm3 . This paper presents a summary of studies on SSPS that JAXA has examined.

The Relationship between Academic Averages of Primary School Science and Technology Class and Test Sub-Test Scores of Placement Test of Science

ERIC Educational Resources Information Center

Guzeller, Cem Oktay

2012-01-01

In this research, the relationship between written exam scores of science and technology class of 6th, 7th, and 8th grades, project, participation in class activities and performance work, year-end academic success point averages and sub-test raw scores of LDT science of 6th, 7th and 8th grades. Academic success point averages were used as…

Technologies for Outer Planet Missions: A companion to the OPAG Exploration Strategy

NASA Astrophysics Data System (ADS)

Beauchamp, Patricia; McKinnon, William

The Outer Planets Assessment Group (OPAG) advocates the need for a focused technology program for the next Outer Planet Flagship Mission after the Europa Jupiter System Mission (EJSM) in order to be ready for a launch in the mid-2020s. Current planning assumes that a mission to Titan and Enceladus will be the highest priority. The challenges common to all Outer Planetary (OP) missions—large distances, long ight times, and stringent limitations on mass, power, and data rate—mean that all missions can signicantly benet from technical advances in a number of broad areas. Since technology development timescales are long, it is most productive to base technology requirements on the expected general characteristics of future missions. While the strategic Flagship mission concepts are better understood, an estimate of the needs for the competed small class (Discovery) and medium class (New Frontiers) missions can be included in constructing an effective technology investment plan. Technology investment priorities are guided by the requirements established in mission and system studies that are focused on the highest priority science objectives. The next OP mission (after EJSM) may involve orbiting one or both of the saturnian satellites Titan and Enceladus. Other potential OP missions include atmospheric probes of the giant planets, in situ exploration at Titan, flybys or orbiters to the ice giants Neptune and Uranus, and ultimately, landing on Europa or Enceladus. The breadth of technology needed for OP exploration clearly calls for an aggressive and focused technology development strategy that aligns with the Decadal Survey recommended mission profile, and includes technologies developed by NASA, as well as acquisition of applicable technologies from other government and commercial sectors. This presentation shows how the technologies discussed in the white paper derive from the Outer Planet science goals, with particular attention to those required by a mission to Titan and Enceladus -active solar system satellites. We explain why they are significant relative to current solar system goals/priorities and outline how they should influence the next generation of solar system exploration missions. Government sponsorship acknowledged

Technologies for Outer Planet Missions: A Companion to the OPAG Exploration Strategy

NASA Astrophysics Data System (ADS)

Beauchamp, P. M.; McKinnon, W. B.

2009-12-01

The Outer Planets Assessment Group (OPAG) advocates the need for a focused technology program for the next Outer Planet Flagship Mission after the Europa Jupiter System Mission (EJSM) in order to be ready for a launch in the mid-2020s. Current planning assumes that a mission to Titan and Enceladus will be the highest priority. The challenges common to all Outer Planetary (OP) missions — large distances, long flight times, and stringent limitations on mass, power, and data rate — mean that all missions can significantly benefit from technical advances in a number of broad areas. Since technology development timescales are long, it is most productive to base technology requirements on the expected general characteristics of future missions. While the strategic Flagship mission concepts are better understood, an estimate of the needs for the competed small class (Discovery) and medium class (New Frontiers) missions can be included in constructing an effective technology investment plan. Technology investment priorities are guided by the requirements established in mission and system studies that are focused on the highest priority science objectives. The next OP mission (after EJSM) may involve orbiting one or both of the saturnian satellites Titan and Enceladus. Other potential OP missions include atmospheric probes of the giant planets, in situ exploration at Titan, flybys or orbiters to the ice giants Neptune and Uranus, and ultimately, landing on Europa or Enceladus. The breadth of technology needed for OP exploration clearly calls for an aggressive and focused technology development strategy that aligns with the Decadal Survey recommended mission profile, and includes technologies developed by NASA, as well as acquisition of applicable technologies from other government and commercial sectors. This presentation shows how the technologies discussed in the white paper derive from the Outer Planet science goals, with particular attention to those required by a mission to Titan and Enceladus. We explain why they are significant relative to current solar system goals/priorities and outline how they should influence the next generation of solar system exploration missions.

Technologies for Outer Planet Missions: A companion to the OPAG Exploration Strategy

NASA Astrophysics Data System (ADS)

Beauchamp, Patricia; McKinnon, William

2010-05-01

The Outer Planets Assessment Group (OPAG) advocates the need for a focused technology program for the next Outer Planet Flagship Mission after the Europa Jupiter System Mission (EJSM) in order to be ready for a launch in the mid-2020s. Current planning assumes that a mission to Titan and Enceladus will be the highest priority. The challenges common to all Outer Planetary (OP) missions—large distances, long flight times, and stringent limitations on mass, power, and data rate—mean that all missions can significantly benefit from technical advances in a number of broad areas. Since technology development timescales are long, it is most productive to base technology requirements on the expected general characteristics of future missions. While the strate¬gic Flagship mission concepts are better understood, an estimate of the needs for the competed small class (Discovery) and medium class (New Frontiers) missions can be included in constructing an effective technology investment plan. Technology investment priorities are guided by the requirements established in mission and system studies that are focused on the highest priority science objectives. The next OP mission (after EJSM) may involve orbiting one or both of the saturnian satellites Titan and Enceladus. Other potential OP missions include atmospheric probes of the giant planets, in situ exploration at Titan, flybys or orbiters to the ice giants Neptune and Uranus, and ultimately, landing on Europa or Enceladus. The breadth of technology needed for OP exploration clearly calls for an aggressive and focused technology development strategy that aligns with the Decadal Survey recommended mission profile, and includes technologies developed by NASA, as well as acquisition of applicable technologies from other government and commercial sectors. This presentation shows how the technologies discussed in the white paper derive from the Outer Planet science goals, with particular attention to those required by a mission to Titan and Enceladus. We explain why they are significant relative to current solar system goals/priorities and outline how they should influence the next generation of solar system exploration missions. Government sponsorship acknowledged

Mission Architecture and Technology Options for a Flagship Class Venus In Situ Mission

NASA Technical Reports Server (NTRS)

Balint, Tibor S.; Kwok, Johnny H.; Kolawa, Elizabeth A.; Cutts, James A.; Senske, David A.

2008-01-01

Venus, as part of the inner triad with Earth and Mars, represents an important exploration target if we want to learn more about solar system formation and evolution. Comparative planetology could also elucidate the differences between the past, present, and future of these three planets, and can help with the characterization of potential habitable zones in our solar system and, by extension, extrasolar systems. A long lived in situ Venus mission concept, called the Venus Mobile Explorer, was prominently featured in NASA's 2006 SSE Roadmap and supported in the community White Paper by the Venus Exploration Analysis Group (VEXAG). Long-lived in situ missions are expected to belong to the largest (Flagship) mission class, which would require both enabling and enhancing technologies beside mission architecture options. Furthermore, extreme environment mitigation technologies for Venus are considered long lead development items and are expected to require technology development through a dedicated program. To better understand programmatic and technology needs and the motivating science behind them, in this fiscal year (FY08) NASA is funding a Venus Flaghip class mission study, based on key science and technology drivers identified by a NASA appointed Venus Science and Technology Definition Team (STDT). These mission drivers are then assembled around a suitable mission architecture to further refine technology and cost elements. In this paper we will discuss the connection between the final mission architecture and the connected technology drivers from this NASA funded study, which - if funded - could enable a future Flagship class Venus mission and potentially drive a proposed Venus technology development program.

The Opinions about Relationship between Students and Teachers in the Class of Hands-on

NASA Astrophysics Data System (ADS)

Pigultong, M.

2018-02-01

This research has the purpose to study on 1) Relationship between Students and Teachers in the Class of Hands - on and 2) Class Management at Rajamangala University of Technology Thanyaburi. The research consists of collecting information from 400 students who have valid student status in 2016 at Rajamangala University of Technology Thanyaburi. This research uses content analysis technique, Average (-X) and Standard Deviation to interpret the information. The results of the research focus on 2 topics 1) The Human relationship between Students and Teachers. The samples group had high expectations of human relationship (x=3.87). 2) Class Management. The samples group had high expectations of Class Management (x=3.88).

75 FR 4693 - New Postal Product

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... Post Group exceed six times the rate for the first ounce of a First-Class Mail letter. Id., para. (e... Dominant Products 1000 Market Dominant Product List First-Class Mail Single-Piece Letters/Postcards Bulk Letters/Postcards Flats Parcels Outbound Single-Piece First-Class Mail International Inbound Single-Piece...

Defining the Relationship Between Human Error Classes and Technology Intervention Strategies

NASA Technical Reports Server (NTRS)

Wiegmann, Douglas A.; Rantanen, Eas M.

2003-01-01

The modus operandi in addressing human error in aviation systems is predominantly that of technological interventions or fixes. Such interventions exhibit considerable variability both in terms of sophistication and application. Some technological interventions address human error directly while others do so only indirectly. Some attempt to eliminate the occurrence of errors altogether whereas others look to reduce the negative consequences of these errors. In any case, technological interventions add to the complexity of the systems and may interact with other system components in unforeseeable ways and often create opportunities for novel human errors. Consequently, there is a need to develop standards for evaluating the potential safety benefit of each of these intervention products so that resources can be effectively invested to produce the biggest benefit to flight safety as well as to mitigate any adverse ramifications. The purpose of this project was to help define the relationship between human error and technological interventions, with the ultimate goal of developing a set of standards for evaluating or measuring the potential benefits of new human error fixes.

Performance assessment of small-package-class nonintrusive inspection systems

NASA Astrophysics Data System (ADS)

Spradling, Michael L.; Hyatt, Roger

1997-02-01

The DoD Counterdrug Technology Development Program has addressed the development and demonstration of technology to enhance nonintrusive inspection of small packages such as passenger baggage, commercially delivered parcels, and breakbulk cargo items. Within the past year they have supported several small package-class nonintrusive inspection system performance assessment activities. All performance assessment programs involved the use of a red/blue team concept and were conducted in accordance with approved assessment protocols. This paper presents a discussion related to the systematic performance assessment of small package-class nonintrusive inspection technologies, including transmission, backscatter and computed tomography x-ray imaging, and protocol-related considerations for the assessment of these systems.

MW-Class Electric Propulsion System Designs

NASA Technical Reports Server (NTRS)

LaPointe, Michael R.; Oleson, Steven; Pencil, Eric; Mercer, Carolyn; Distefano, Salvador

2011-01-01

Electric propulsion systems are well developed and have been in commercial use for several years. Ion and Hall thrusters have propelled robotic spacecraft to encounters with asteroids, the Moon, and minor planetary bodies within the solar system, while higher power systems are being considered to support even more demanding future space science and exploration missions. Such missions may include orbit raising and station-keeping for large platforms, robotic and human missions to near earth asteroids, cargo transport for sustained lunar or Mars exploration, and at very high-power, fast piloted missions to Mars and the outer planets. The Advanced In-Space Propulsion Project, High Efficiency Space Power Systems Project, and High Power Electric Propulsion Demonstration Project were established within the NASA Exploration Technology Development and Demonstration Program to develop and advance the fundamental technologies required for these long-range, future exploration missions. Under the auspices of the High Efficiency Space Power Systems Project, and supported by the Advanced In-Space Propulsion and High Power Electric Propulsion Projects, the COMPASS design team at the NASA Glenn Research Center performed multiple parametric design analyses to determine solar and nuclear electric power technology requirements for representative 300-kW class and pulsed and steady-state MW-class electric propulsion systems. This paper describes the results of the MW-class electric power and propulsion design analysis. Starting with the representative MW-class vehicle configurations, and using design reference missions bounded by launch dates, several power system technology improvements were introduced into the parametric COMPASS simulations to determine the potential system level benefits such technologies might provide. Those technologies providing quantitative system level benefits were then assessed for technical feasibility, cost, and time to develop. Key assumptions and primary results of the COMPASS MW-class electric propulsion power system study are reported, and discussion is provided on how the analysis might be used to guide future technology investments as NASA moves to more capable high power in-space propulsion systems.

Integrating Rapid Prototyping into Graphic Communications

ERIC Educational Resources Information Center

Xu, Renmei; Flowers, Jim

2015-01-01

Integrating different science, technology, engineering, and mathematics (STEM) areas can help students learn and leverage both the equipment and expertise at a single school. In comparing graphic communications classes with classes that involve rapid prototyping (RP) technologies like 3D printing, there are sufficient similarities between goals,…

The quest to be "modern": The adoption of electric light, heat, and power technology in small-town America, 1883-1929

NASA Astrophysics Data System (ADS)

Hellrigel, Mary Ann

This dissertation is a social, business, and technological history of electrification in the United States. It examines the origins of the electric utility industry, the development of light, heat and power technology, the marketing of electric service, and the adoption of electricity and domestic appliances in the late nineteenth and early twentieth centuries in two communities: Harrisburg and West Chester, Pennsylvania. Beginning in the 1880s, manufactured gas and electric utilities waged an intense and lengthy battle for the urban energy marketplace. Many villages, small towns and big cities had multiple gas and electric companies, driving technological change as they worked to increase reliability, lower costs, and improve lamps, lighting fixtures, and appliances. Producers as well as consumers grappled with these new sources of energy, looking for profitable and practical ways to incorporate them into everyday life. Gas and utility executives, locked in head-to-head competition, realized that marketing their invisible product was an uncertain process. Utilities redefined the concepts of "tradition" and "modernity" to attract investors and offer appliances and installation in addition to selling energy. Upper and middle class households seeking a modern comfortable home could use gas or electricity (and often both), while working classes made do with kerosene, coal and wood. Mixed technologies, based on consumer preference, access, product availability, price, and service greatly influenced the creation of "modern" America. Initially, Pennsylvania law mandated local energy systems-electricity and gas had to be consumed within the same town. Only in the early twentieth century were these laws amended to permit inter-connections, allowing merger and consolidation of utilities to serve a wider geographic area. By the 1910s, law, technology, and capital made it possible to abandon local central stations. In only a few decades, the industry shifted from locally-owned small scale generation plants to larger regional systems capable of long distance transmission and directed by a cadre of engineering, financial, and managerial experts. In 1928, Harrisburg's electric utility merged into the Pennsylvania Power & Light Company and the next year West Chester's electric and gas companies became part of the Philadelphia Electric Company, marking the beginning of a new era.

76 FR 71087 - Market Test of Experimental Product: “First-Class Tracer”

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... POSTAL SERVICE Market Test of Experimental Product: ``First-Class Tracer'' AGENCY: Postal Service \\TM\\. ACTION: Notice. SUMMARY: The Postal Service gives notice of a market test of an experimental... ``First-Class Tracer'' experimental product on or after December 7, 2011. The Postal Service has filed...

76 FR 58461 - Information Collection; Qualified Products List for Class A Foams for Wildland Firefighting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... A Foams for Wildland Firefighting AGENCY: Forest Service, USDA. ACTION: Notice; request for comment... approved information collection, Qualified Products List for Class A Foams for Wildland Firefighting. DATES... year, including holidays. SUPPLEMENTARY INFORMATION: Title: Qualified Products List for Class A Foam...

What Do 2nd and 10th Graders Have in Common? Worms and Technology: Using Technology to Collaborate across Boundaries

ERIC Educational Resources Information Center

Culver, Patti; Culbert, Angie; McEntyre, Judy; Clifton, Patrick; Herring, Donna F.; Notar, Charles E.

2009-01-01

The article is about the collaboration between two classrooms that enabled a second grade class to participate in a high school biology class. Through the use of modern video conferencing equipment, Mrs. Culbert, with the help of the Dalton State College Educational Technology Training Center (ETTC), set up a live, two way video and audio feed of…

Effects of an Inverted Instructional Delivery Model on Achievement of Ninth-Grade Physical Science Honors Students

NASA Astrophysics Data System (ADS)

Howell, Donna

This mixed-methods action research study was designed to assess the achievement of ninth-grade Physical Science Honors students by analysis of pre and posttest data. In addition, perceptual data from students, parents, and the researcher were collected to form a complete picture of the flipped lecture format versus the traditional lecture format. The researcher utilized a 4MAT learning cycle in two Physical Science Honors classes. One of these classes was traditionally delivered with lecture-type activities taking place inside the classroom and homework-type activities taking place at home; the other inverted, or flipped, delivered with lecture-type activities taking place outside the classroom and homework-type activities taking place inside the classroom. Existing unit pre and posttests for both classes were analyzed for differences in academic achievement. At the completion of the units, the flipped class students and parents were surveyed, and student focus groups were convened to ascertain their perceptions of the flipped classroom delivery model. Statistical analysis of posttest data revealed that there is no significant difference between the traditional lecture delivery format and the flipped delivery format. Analysis of perceptual data revealed six themes that must be considered when deciding to flip the classroom: how to hold students accountable for viewing the at-home videos, accessibility of students to the required technology, technical considerations relating to the video production, comprehension of the material both during and after viewing the videos, pedagogy of the overall flipped method, and preference for the flipped method overall. Findings revealed that students, parents, and the researcher all had a preference for the flipped class format, provided the above issues are addressed. The flipped class format encourages students to become more responsible for their learning, and, in addition, students reported that the hands-on inquiry activities done in class aided them in learning the subject matter. It is recommended, however, that before instructors decide to flip the classroom, they ensure that all students have access to needed technology, that there is a plan in place for ensuring that the students actually view the assigned videos, that they have a way to create the videos and ensure adequate quality, and that some discussion is held in class after each assigned video to ensure comprehension of the material.

Modeling of a production system using the multi-agent approach

NASA Astrophysics Data System (ADS)

Gwiazda, A.; Sękala, A.; Banaś, W.

2017-08-01

The method that allows for the analysis of complex systems is a multi-agent simulation. The multi-agent simulation (Agent-based modeling and simulation - ABMS) is modeling of complex systems consisting of independent agents. In the case of the model of the production system agents may be manufactured pieces set apart from other types of agents like machine tools, conveyors or replacements stands. Agents are magazines and buffers. More generally speaking, the agents in the model can be single individuals, but you can also be defined as agents of collective entities. They are allowed hierarchical structures. It means that a single agent could belong to a certain class. Depending on the needs of the agent may also be a natural or physical resource. From a technical point of view, the agent is a bundle of data and rules describing its behavior in different situations. Agents can be autonomous or non-autonomous in making the decision about the types of classes of agents, class sizes and types of connections between elements of the system. Multi-agent modeling is a very flexible technique for modeling and model creating in the convention that could be adapted to any research problem analyzed from different points of views. One of the major problems associated with the organization of production is the spatial organization of the production process. Secondly, it is important to include the optimal scheduling. For this purpose use can approach multi-purposeful. In this regard, the model of the production process will refer to the design and scheduling of production space for four different elements. The program system was developed in the environment NetLogo. It was also used elements of artificial intelligence. The main agent represents the manufactured pieces that, according to previously assumed rules, generate the technological route and allow preprint the schedule of that line. Machine lines, reorientation stands, conveyors and transport devices also represent the other type of agent that are utilized in the described simulation. The article presents the idea of an integrated program approach and shows the resulting production layout as a virtual model. This model was developed in the NetLogo multi-agent program environment.

Polyphenolic profiles of Basque cider apple cultivars and their technological properties.

PubMed

Alonso-Salces, Rosa M; Barranco, Alejandro; Abad, Beatriz; Berrueta, Luis A; Gallo, Blanca; Vicente, Francisca

2004-05-19

The polyphenolic compositions of 31 Basque cider apple cultivars were determined in pulp, peel, and juice by high-performance liquid chromatography with diode array detection analysis of crude extracts and after thiolysis. Total polyphenols are distributed in a wide concentration range depending on the cultivar. Procyanidins are the class of polyphenols that present major concentrations in apple. Their average degrees of polymerization range from 4 to 8 depending on the cultivar. Apple cultivars were technologically classified into bitter and nonbitter categories using different classification systems obtained by applying several pattern recognition techniques, such as principal component analysis, K-nearest neighbors, soft independent modeling of class analogy, partial least-squares, and multilayer feed-forward-artificial neural networks, to apple pulp, peel, or juice data (individual polyphenol concentrations, total procyanidin content, and the average degree of polymerization of procyanidins). Bitter apple cultivars present higher contents of flavan-3-ols and/or dihydrochalcones than nonbitter cultivars. Detailed knowledge of the polyphenolic profile of each apple cultivar affords information about their susceptibility to oxidation, their sensory properties (bitterness, astringency), and their possible influence on the characteristics and quality of the final product (juice, cider) when apples are processed.

A 100 kW-Class Technology Demonstrator for Space Solar Power

NASA Astrophysics Data System (ADS)

Howell, J.; Carrington, C.; Day, G.

2004-12-01

A first step in the development of solar power from space is the flight demonstration of critical technologies. These fundamental technologies include efficient solar power collection and generation, power management and distribution, and thermal management. In addition, the integration and utilization of these technologies into a viable satellite bus could provide an energy-rich platform for a portfolio of payload experiments such as wireless power transmission (WPT). This paper presents the preliminary design of a concept for a 100 kW-class free-flying platform suitable for flight demonstration of Space Solar Power (SSP) technology experiments.

Parametric identification of the process of preparing ceramic mixture as an object of control

NASA Astrophysics Data System (ADS)

Galitskov, Stanislav; Nazarov, Maxim; Galitskov, Konstantin

2017-10-01

Manufacture of ceramic materials and products largely depends on the preparation of clay raw materials. The main process here is the process of mixing, which in industrial production is mostly done in cross-compound clay mixers of continuous operation with steam humidification. The authors identified features of dynamics of this technological stage, which in itself is a non-linear control object with distributed parameters. When solving practical tasks for automation of a certain class of ceramic materials production it is important to make parametric identification of moving clay. In this paper the task is solved with the use of computational models, approximated to a particular section of a clay mixer along its length. The research introduces a methodology of computational experiments as applied to the designed computational model. Parametric identification of dynamic links was carried out according to transient characteristics. The experiments showed that the control object in question is to a great extent a non-stationary one. The obtained results are problematically oriented on synthesizing a multidimensional automatic control system for preparation of ceramic mixture with specified values of humidity and temperature exposed to the technological process of major disturbances.

Carbon Nanotubes for Human Space Flight

NASA Technical Reports Server (NTRS)

Scott, Carl D.; Files, Brad; Yowell, Leonard

2003-01-01

Single-wall carbon nanotubes offer the promise of a new class of revolutionary materials for space applications. The Carbon Nanotube Project at NASA Johnson Space Center has been actively researching this new technology by investigating nanotube production methods (arc, laser, and HiPCO) and gaining a comprehensive understanding of raw and purified material using a wide range of characterization techniques. After production and purification, single wall carbon nanotubes are processed into composites for the enhancement of mechanical, electrical, and thermal properties. This "cradle-to-grave" approach to nanotube composites has given our team unique insights into the impact of post-production processing and dispersion on the resulting material properties. We are applying our experience and lessons-learned to developing new approaches toward nanotube material characterization, structural composite fabrication, and are also making advances in developing thermal management materials and electrically conductive materials in various polymer-nanotube systems. Some initial work has also been conducted with the goal of using carbon nanotubes in the creation of new ceramic materials for high temperature applications in thermal protection systems. Human space flight applications such as advanced life support and fuel cell technologies are also being investigated. This discussion will focus on the variety of applications under investigation.

Future remote-sensing programs

NASA Technical Reports Server (NTRS)

Schweickart, R. L.

1975-01-01

User requirements and methods developed to fulfill them are discussed. Quick-look data, data storage on computer-compatible tape, and an integrated capability for production of images from the whole class of earth-viewing satellites are among the new developments briefly described. The increased capability of LANDSAT-C and Nimbus G and the needs of specialized applications such as, urban land use planning, cartography, accurate measurement of small agricultural fields, thermal mapping and coastal zone management are examined. The affect of the space shuttle on remote sensing technology through increased capability is considered.

Practical methods for near-term piloted Mars missions

NASA Technical Reports Server (NTRS)

Zubrin, Robert M.; Weaver, David B.

1993-01-01

An evaluation is made of ways of using near-term technologies for direct and semidirect manned Mars missions. A notable feature of the present schemes is the in situ propellant production of CH4/O2 and H2O on the Martian surface in order to reduce surface consumable and return propellant requirements. Medium-energy conjunction class trajectories are shown to be optimal for such missions. Attention is given to the backup plans and abort philosophy of these missions. Either the Russian Energia B or U.S. Saturn VII launch vehicles may be used.

Biosurfactants for Microbubble Preparation and Application

PubMed Central

Xu, Qingyi; Nakajima, Mitsutoshi; Liu, Zengshe; Shiina, Takeo

2011-01-01

Biosurfactants can be classified by their chemical composition and their origin. This review briefly describes various classes of biosurfactants based on their origin and introduces a few of the most widely used biosurfactants. The current status and future trends in biosurfactant production are discussed, with an emphasis on those derived from plants. Following a brief introduction of the properties of microbubbles, recent progress in the application of microbubble technology to molecular imaging, wastewater treatment, and aerobic fermentation are presented. Several studies on the preparation, characterization and applications of biosurfactant-based microbubbles are reviewed. PMID:21339998

The Determinants of Parental Effort in Education Production: Do Parents Respond to Changes in Class Size?

ERIC Educational Resources Information Center

Bonesronning, Hans

2004-01-01

The present paper supplements the traditional class size literature by exploring the causal relationship between class size and parental effort in education production. Class size variation that is exogenous to parental effort comes from interaction between enrollment and a maximum class size rule of 30 students in the lower secondary school in…

Three Investigations of the Utility of Textbook Technology Supplements

ERIC Educational Resources Information Center

Gurung, Regan A. R.

2015-01-01

In three separate introductory psychology classes over a three-year period, I tested whether over 600 students' exam scores were associated with the use of textbook technology supplements (TTSs). Each class used a different textbook and a different TTS ("Learnsmart," "PsychPortal," and "Aplia"). In general, students…

Virtual Teams and Synchronous Presentations: An Online Class Experience

ERIC Educational Resources Information Center

Adkins, Joni K.

2013-01-01

Global expansion, cost containment, and technology advances have all played a role in the increase of virtual teams in today's workplace. Virtual teams in an online graduate information technology management class prepared and presented synchronous presentations over a business or non-profit sector case. This paper includes a brief literature…

Facilitate Active Learning: The Role of Perceived Benefits of Using Technology

ERIC Educational Resources Information Center

Zhuang, Weiling; Xiao, Qian

2018-01-01

The authors examine factors influencing student active learning and the ensuing class learning experience in the context of applying technologies in the classroom. The results suggest that the psychological benefit directly and indirectly influences class learning experience. In addition, the functional benefit only indirectly influences class…

Decoding ClassDojo: Psycho-Policy, Social-Emotional Learning and Persuasive Educational Technologies

ERIC Educational Resources Information Center

Williamson, Ben

2017-01-01

ClassDojo is one of the world's most successful educational technologies, currently used by over 3 million teachers and 35 million children globally. It reinforces and enacts emerging governmental "psycho-policies" around the measurement and modification of children's social and emotional learning in schools. This article focuses…

Desktop Simulation: Towards a New Strategy for Arts Technology Education

ERIC Educational Resources Information Center

Eidsheim, Nina Sun

2009-01-01

For arts departments in many institutions, technology education entails prohibitive equipment costs, maintenance requirements and administrative demands. There are also inherent pedagogical challenges: for example, recording studio classes where, due to space and time constraints, only a few students in what might be a large class can properly…

Student Evaluation of Audience Response Technology in Large Lecture Classes

ERIC Educational Resources Information Center

MacGeorge, Erina L.; Homan, Scott R.; Dunning, John B., Jr.; Elmore, David; Bodie, Graham D.; Evans, Ed; Khichadia, Sangeetha; Lichti, Steven M.; Feng, Bo; Geddes, Brian

2008-01-01

In the past few years, audience response technology (ART) has been widely adopted on college campuses, and is especially popular among instructors of large lecture classes. Claims regarding ART's benefits to students have received only limited empirical evaluation, and prior studies exhibit methodological limitations. The current study provides a…

Does HOPSports Promote Youth Physical Activity in Physical Education Classes?

ERIC Educational Resources Information Center

West, Stephanie T.; Shores, Kindal A.

2014-01-01

This study investigated how a technological intervention, HOPSports (HOPS), impacted youth physical activity (PA) in a physical education (PE) class. Research indicates rising levels of youth television watching and video game use, physical inactivity, and related overweight. One approach to increase youth PA is to use technology-based…

Real Time, On Line Crop Monitoring and Analysis with Near Global Landsat-class Mosaics

NASA Astrophysics Data System (ADS)

Varlyguin, D.; Hulina, S.; Crutchfield, J.; Reynolds, C. A.; Frantz, R.

2015-12-01

The presentation will discuss the current status of GDA technology for operational, automated generation of 10-30 meter near global mosaics of Landsat-class data for visualization, monitoring, and analysis. Current version of the mosaic combines Landsat 8 and Landsat 7. Sentinel-2A imagery will be added once it is operationally available. The mosaics are surface reflectance calibrated and are analysis ready. They offer full spatial resolution and all multi-spectral bands of the source imagery. Each mosaic covers all major agricultural regions of the world and 16 day time window. 2014-most current dates are supported. The mosaics are updated in real-time, as soon as GDA downloads Landsat imagery, calibrates it to the surface reflectances, and generates data gap masks (all typically under 10 minutes for a Landsat scene). The technology eliminates the complex, multi-step, hands-on process of data preparation and provides imagery ready for repetitive, field-to-country analysis of crop conditions, progress, acreages, yield, and production. The mosaics can be used for real-time, on-line interactive mapping and time series drilling via GeoSynergy webGIS platform. The imagery is of great value for improved, persistent monitoring of global croplands and for the operational in-season analysis and mapping of crops across the globe in USDA FAS purview as mandated by the US government. The presentation will overview operational processing of Landsat-class mosaics in support of USDA FAS efforts and will look into 2015 and beyond.

One-Centimeter Orbits in Near-Real Time: The GPS Experience on OSTM/JASON-2

NASA Technical Reports Server (NTRS)

Haines, Bruce; Armatys, Michael; Bar-Sever, Yoaz; Bertiger, Willy; Desai, Shailen; Dorsey, Angela; Lane, Christopher; Weiss, Jan

2010-01-01

The advances in Precise Orbit Determination (POD) over the past three decades have been driven in large measure by the increasing demands of satellite altimetry missions. Since the launch of Seasat in 1978, both tracking-system technologies and orbit modeling capabilities have evolved considerably. The latest in a series of precise (TOPEX-class) altimeter missions is the Ocean Surface Topography Mission (OSTM, also Jason-2). GPS-based orbit solutions for this mission are accurate to 1-cm (radial RMS) within 3-5 hrs of real time. These GPS-based orbit products provide the basis for a near-real time sea-surface height product that supports increasingly diverse applications of operational oceanography and climate forecasting.

Andragogical Model in Language Training of Mining Specialists

NASA Astrophysics Data System (ADS)

Bondareva, Evgeniya; Chistyakova, Galina; Kleshevskyi, Yury; Sergeev, Sergey; Stepanov, Aleksey

2017-11-01

Nowadays foreign language competence is one of the main professional skills of mining engineers. Modern competitive conditions require the ability for meeting production challenges in a foreign language from specialists and managers of mining enterprises. This is the reason of high demand on foreign language training/retraining courses. Language training of adult learners fundamentally differs from children and adolescent education. The article describes the features of andragogical learning model. The authors conclude that distance learning is the most productive education form having a number of obvious advantages over traditional (in-class) one. Interactive learning method that involves active engagement of adult trainees appears to be of the greatest interest due to introduction of modern information and communication technologies for distance learning.

Marching to the beat of Moore's Law

NASA Astrophysics Data System (ADS)

Borodovsky, Yan

2006-03-01

Area density scaling in integrated circuits, defined as transistor count per unit area, has followed the famous observation-cum-prediction by Gordon Moore for many generations. Known as "Moore's Law" which predicts density doubling every 18-24 month, it has provided all important synchronizing guidance and reference for tools and materials suppliers, IC manufacturers and their customers as to what minimal requirements their products and services need to meet to satisfy technical and financial expectations in support of the infrastructure required for the development and manufacturing of corresponding technology generation nodes. Multiple lithography solutions are usually under considerations for any given node. In general, three broad classes of solutions are considered: evolutionary - technology that is extension of existing technology infrastructure at similar or slightly higher cost and risk to schedule; revolutionary - technology that discards significant parts of the existing infrastructure at similar cost, higher risk to schedule but promises higher capability as compared to the evolutionary approach; and last but not least, disruptive - approach that as a rule promises similar or better capabilities, much lower cost and wholly unpredictable risk to schedule and products yields. This paper examines various lithography approaches, their respective merits against criteria of respective infrastructure availability, affordability and risk to IC manufacturer's schedules and strategy involved in developing and selecting best solution in an attempt to sort out key factors that will impact the decision on the lithography choice for large-scale manufacturing for the future technology nodes.

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation.

PubMed

Patil, Hemlata; Tiwari, Roshan V; Repka, Michael A

2016-02-01

Hot-melt extrusion (HME) is a promising technology for the production of new chemical entities in the developmental pipeline and for improving products already on the market. In drug discovery and development, industry estimates that more than 50% of active pharmaceutical ingredients currently used belong to the biopharmaceutical classification system II (BCS class II), which are characterized as poorly water-soluble compounds and result in formulations with low bioavailability. Therefore, there is a critical need for the pharmaceutical industry to develop formulations that will enhance the solubility and ultimately the bioavailability of these compounds. HME technology also offers an opportunity to earn intellectual property, which is evident from an increasing number of patents and publications that have included it as a novel pharmaceutical formulation technology over the past decades. This review had a threefold objective. First, it sought to provide an overview of HME principles and present detailed engineered extrusion equipment designs. Second, it included a number of published reports on the application of HME techniques that covered the fields of solid dispersions, microencapsulation, taste masking, targeted drug delivery systems, sustained release, films, nanotechnology, floating drug delivery systems, implants, and continuous manufacturing using the wet granulation process. Lastly, this review discussed the importance of using the quality by design approach in drug development, evaluated the process analytical technology used in pharmaceutical HME monitoring and control, discussed techniques used in HME, and emphasized the potential for monitoring and controlling hot-melt technology.

Process Engineering Technology Center Initiative

NASA Technical Reports Server (NTRS)

Centeno, Martha A.

2001-01-01

NASA's Kennedy Space Center (KSC) is developing as a world-class Spaceport Technology Center (STC). From a process engineering (PE) perspective, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are safe, successful shuttle and expendable vehicle launches carrying state-of-the-art payloads. PE is devoted to process design, process management, and process improvement, rather than product design. PE also emphasizes the relationships of workers with systems and processes. Thus, it is difficult to speak of having a laboratory for PE at KSC because the entire facility is practically a laboratory when observed from a macro level perspective. However, it becomes necessary, at times, to show and display how KSC has benefited from PE and how KSC has contributed to the development of PE; hence, it has been proposed that a Process Engineering Technology Center (PETC) be developed to offer a place with a centralized focus on PE projects, and a place where KSC's PE capabilities can be showcased, and a venue where new Process Engineering technologies can be investigated and tested. Graphics for showcasing PE capabilities have been designed, and two initial test beds for PE technology research have been identified. Specifically, one test bed will look into the use of wearable computers with head mounted displays to deliver work instructions; the other test bed will look into developing simulation models that can be assembled into one to create a hierarchical model.

Process Engineering Technology Center Initiative

NASA Technical Reports Server (NTRS)

Centeno, Martha A.

2002-01-01

NASA's Kennedy Space Center (KSC) is developing as a world-class Spaceport Technology Center (STC). From a process engineering (PE) perspective, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are safe, successful shuttle and expendable vehicle launches carrying state-of-the-art payloads. PE is devoted to process design, process management, and process improvement, rather than product design. PE also emphasizes the relationships of workers with systems and processes. Thus, it is difficult to speak of having a laboratory for PE at K.S.C. because the entire facility is practically a laboratory when observed from a macro level perspective. However, it becomes necessary, at times, to show and display how K.S.C. has benefited from PE and how K.S.C. has contributed to the development of PE; hence, it has been proposed that a Process Engineering Technology Center (PETC) be developed to offer a place with a centralized focus on PE projects, and a place where K.S.C.'s PE capabilities can be showcased, and a venue where new Process Engineering technologies can be investigated and tested. Graphics for showcasing PE capabilities have been designed, and two initial test beds for PE technology research have been identified. Specifically, one test bed will look into the use of wearable computers with head mounted displays to deliver work instructions; the other test bed will look into developing simulation models that can be assembled into one to create a hierarchical model.

International Trade. U.S. Metric Study Interim Report.

ERIC Educational Resources Information Center

Gordon, Gerald F.

In order to evaluate the potential effects of U.S. conversion to SI (Systems International) units on U.S. foreign trade, 188 export product classes and 155 import product classes were selected from 1,166 Standard Industrial Classification (SIC) product classes and questionnaires were mailed to a total of 510 firms, utilizing separate forms for…

The roles and functions of a lunar base Nuclear Technology Center

NASA Astrophysics Data System (ADS)

Buden, D.; Angelo, J. A., Jr.

This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth.

Microwave (MW) promoted high yield expedient synthesis of steryl ferulates--A class of novel biologically active compounds: A comparative study of their antioxidant activity with that of naturally occurring γ-oryzanol.

PubMed

Begum, Ashma; Borah, Preetismita; Chowdhury, Pritish

2016-03-01

Synthetic steryl ferulates [3-O-(trans-4-feruloyl)-sterols] are currently gaining considerable importance in recent years to be used as nutraceuticals and food additives as well as in pharmaceutical applications substituting γ-oryzanol - a class of naturally occurring steryl ferulates having potent antioxidant and other organoleptic properties. Considering the importance of this class of compounds coupled with green technology associated with microwave energy (MW) in organic synthesis, we report here an expedited and high yield synthesis of steryl ferulates from abundant steroids, viz., cholesterol, cholestanol, stigmasterol, stigmastanol, β-sitosterol, β-campesterol, β-campestanol and ergosterol applying MW energy in the crucial step of esterification process of sterols with trans-4-O-acetylferulic acid to furnish their esterified products, viz., 3-O-(trans-4-O-acetylferuloyl)-sterols for their eventual deprotection to their respective steryl ferulates. We further report an efficient and scalable process of producing acetylferulic acid. Testing of synthesized steryl ferulates against antioxidant assays has also been highlighted. Copyright © 2015 Elsevier Inc. All rights reserved.

Solar synthesis of advanced materials: A solar industrial program initiative

NASA Astrophysics Data System (ADS)

Lewandowski, A.

1992-06-01

This is an initiative for accelerating the use of solar energy in the advanced materials manufacturing industry in the United States. The initiative will be based on government-industry collaborations that will develop the technology and help US industry compete in the rapidly expanding global advanced materials marketplace. Breakthroughs in solar technology over the last 5 years have created exceptional new tools for developing advanced materials. Concentrated sunlight from solar furnaces can produce intensities that approach those on the surface of the sun and can generate temperatures well over 2000 C. Very thin layers of illuminated surfaces can be driven to remarkably high temperatures in a fraction of a second. Concentrated solar energy can be delivered over large areas, allowing for rapid processing and high production rates. By using this technology, researchers are transforming low-cost raw materials into high-performance products. Solar synthesis of advanced materials uses bulk materials and energy more efficiently, lowers processing costs, and reduces the need for strategic materials -- all with a technology that does not harm the environment. The Solar Industrial Program has built a unique, world class solar furnace at NREL to help meet the growing need for applied research in advanced materials. Many new advanced materials processes have been successfully demonstrated in this facility, including metalorganic deposition, ceramic powders, diamond-like carbon materials, rapid heat treating, and cladding (hard coating).

Review of Portable, Manually Operated, and Non-Total Flooding Fire Extinguishing Technologies for Use on Naval Vessels

DTIC Science & Technology

2011-12-01

Corrosion problems arising from the use of perfluoro-or hydrofluorocarbon agents have been investigated and are of concern. The concern centers on the...which was formerly known as Powdered Aerosol B, can be used on Class A, Class B, and Class C fires. These agents are a blend of several halocarbons...Canada Review of Portable, Manually Operated, and Non-Total Flooding Fire Extinguishing Technologies for Use on Naval Vessels Contract Project Manager

Proteases as therapeutics

PubMed Central

Craik, Charles S.; Page, Michael J.; Madison, Edwin L.

2015-01-01

Proteases are an expanding class of drugs that hold great promise. The U.S. FDA (Food and Drug Administration) has approved 12 protease therapies, and a number of next generation or completely new proteases are in clinical development. Although they are a well-recognized class of targets for inhibitors, proteases themselves have not typically been considered as a drug class despite their application in the clinic over the last several decades; initially as plasma fractions and later as purified products. Although the predominant use of proteases has been in treating cardiovascular disease, they are also emerging as useful agents in the treatment of sepsis, digestive disorders, inflammation, cystic fibrosis, retinal disorders, psoriasis and other diseases. In the present review, we outline the history of proteases as therapeutics, provide an overview of their current clinical application, and describe several approaches to improve and expand their clinical application. Undoubtedly, our ability to harness proteolysis for disease treatment will increase with our understanding of protease biology and the molecular mechanisms responsible. New technologies for rationally engineering proteases, as well as improved delivery options, will expand greatly the potential applications of these enzymes. The recognition that proteases are, in fact, an established class of safe and efficacious drugs will stimulate investigation of additional therapeutic applications for these enzymes. Proteases therefore have a bright future as a distinct therapeutic class with diverse clinical applications. PMID:21406063

Reliable, Low-Cost, Low-Weight, Non-Hermetic Coating for MCM Applications

NASA Technical Reports Server (NTRS)

Jones, Eric W.; Licari, James J.

2000-01-01

Through an Air Force Research Laboratory sponsored STM program, reliable, low-cost, low-weight, non-hermetic coatings for multi-chip-module(MCK applications were developed. Using the combination of Sandia Laboratory ATC-01 test chips, AvanTeco's moisture sensor chips(MSC's), and silicon slices, we have shown that organic and organic/inorganic overcoatings are reliable and practical non-hermetic moisture and oxidation barriers. The use of the MSC and unpassivated ATC-01 test chips provided rapid test results and comparison of moisture barrier quality of the overcoatings. The organic coatings studied were Parylene and Cyclotene. The inorganic coatings were Al2O3 and SiO2. The choice of coating(s) is dependent on the environment that the device(s) will be exposed to. We have defined four(4) classes of environments: Class I(moderate temperature/moderate humidity). Class H(high temperature/moderate humidity). Class III(moderate temperature/high humidity). Class IV(high temperature/high humidity). By subjecting the components to adhesion, FTIR, temperature-humidity(TH), pressure cooker(PCT), and electrical tests, we have determined that it is possible to reduce failures 50-70% for organic/inorganic coated components compared to organic coated components. All materials and equipment used are readily available commercially or are standard in most semiconductor fabrication lines. It is estimated that production cost for the developed technology would range from $1-10/module, compared to $20-200 for hermetically sealed packages.

Comparative Analyses of Discourse in Specialized STEM School Classes

ERIC Educational Resources Information Center

Tofel-Grehl, Colby; Callahan, Carolyn M.; Nadelson, Louis S.

2017-01-01

The authors detail the discourse patterns observed within mathematics and science classes at specialized STEM (science, technology, engineering, and mathematics) high schools. Analyses reveal that teachers in mathematics classes tended to engage their students in authoritative discourse while teachers in science classes tended to engage students…

77 FR 75703 - Partial Approval and Disapproval of Air Quality Implementation Plans; Arizona; Regional Haze and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

... action includes all portions of the SIP except for three electric generating stations that were addressed... Arizona's Best Available Retrofit Technology (BART) control analysis and determinations, Reasonable... refer to Best Available Retrofit Technology. (6) The term Class I area refers to a mandatory Class I...

Science/Technology/Society: Model Lessons for Secondary Science Classes.

ERIC Educational Resources Information Center

Pearson, Janice V., Ed.

This volume contains 35 lessons designed to be used in secondary science classes to introduce the science/technology/society (STS) themes and issues. While the first 11 lessons focus on general STS themes, the other 24 lessons cover specific STS issues that fall under such categories as population growth, water resources, world hunger, food…

An Online, Interactive Renewable Energy Laboratory

ERIC Educational Resources Information Center

O'Leary, D. A.; Shattuck, J.; Kubby, J.

2012-01-01

An undergraduate introductory science, technology, engineering, and math (STEM) class can be a jarring disappointment to new students expecting to work with cutting-edge, real-world technology. Their cell phones are often more technically advanced and real-world than the tools used in a class lab. Not surprisingly, many complain that the STEM labs…

Digital Masterpieces

ERIC Educational Resources Information Center

Hunter-Doniger, Tracey

2005-01-01

Tracey Hunter-Doniger is an elementary visual arts teacher who is fortunate enough to work in a school that realizes the value and influence art has on technology. Twice a year, her first-through fifth-grade classes meet in the computer lab to create computer-generated works of art. the class discusses the importance of art in technology, such as…

Cloud Computing Technologies in Writing Class: Factors Influencing Students' Learning Experience

ERIC Educational Resources Information Center

Wang, Jenny

2017-01-01

The proposed interactive online group within the cloud computing technologies as a main contribution of this paper provides easy and simple access to the cloud-based Software as a Service (SaaS) system and delivers effective educational tools for students and teacher on after-class group writing assignment activities. Therefore, this study…

Multivariate regression model for partitioning tree volume of white oak into round-product classes

Treesearch

Daniel A. Yaussy; David L. Sonderman

1984-01-01

Describes the development of multivariate equations that predict the expected cubic volume of four round-product classes from independent variables composed of individual tree-quality characteristics. Although the model has limited application at this time, it does demonstrate the feasibility of partitioning total tree cubic volume into round-product classes based on...

A Multinomial Logit Approach to Estimating Regional Inventories by Product Class

Treesearch

Lawrence Teeter; Xiaoping Zhou

1998-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The objective of this research is to develop a methodology to distribute the volume on each FIA survey plot to product classes and...

MUTAGENICITY IN SALMONELLA AND DNA DAMAGE IN THE CHO/COMET ASSAY INDUCED BY NITROHALOMETHANES, A NOVEL CLASS OF DRINKING WATER DISINFECTION BY-PRODUCTS

EPA Science Inventory

Mutagenicity in Salmonella and DNA Damage in the CHO/Comet Assay Induced by Nitrohalomethanes, a Novel Class of Drinking Water Disinfection By-Products.

Halomethanes are a class of drinking water disinfection by-products (DBPs) whose genotoxicity has been studied extensi...

Biomass and productivity of three phytoplankton size classes in San Francisco Bay.

USGS Publications Warehouse

Cole, B.E.; Cloern, J.E.; Alpine, A.E.

1986-01-01

The 5-22 mu m size accounted for 40-50% of annual production in each embayment, but production by phytoplanton >22 mu m ranged from 26% in the S reach to 54% of total phytoplankton production in the landward embayment of the N reach. A productivity index is derived that predicts daily productivity for each size class as a function of ambient irradiance and integrated chlorophyll a in the photic zone. For the whole phytoplankton community and for each size class, this index was constant at approx= 0.76 g C m-2 (g chlorophyll a Einstein)-1. The annual means of maximum carbon assimilation numbers were usually similar for the three size classes. Spatial and temporal variations in size-fractionated productivity are primarily due to differences in biomass rather than size-dependent carbon assimilation rates. -from Authors

21 CFR 7.41 - Health hazard evaluation and recall classification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... exposed to the product being considered, with particular attention paid to the hazard to those individuals....e., Class I, Class II, or Class III, to indicate the relative degree of health hazard of the product...

Phytoplankton class-specific primary production in the world's oceans: Seasonal and interannual variability from satellite observations

NASA Astrophysics Data System (ADS)

Uitz, Julia; Claustre, Hervé; Gentili, Bernard; Stramski, Dariusz

2010-09-01

We apply an innovative approach to time series data of surface chlorophyll from satellite observations with SeaWiFS (Sea-viewing Wide Field-of-view Sensor) to estimate the primary production associated with three major phytoplankton classes (micro-, nano-, and picophytoplankton) within the world's oceans. Statistical relationships, determined from an extensive in situ database of phytoplankton pigments, are used to infer class-specific vertical profiles of chlorophyll a concentration from satellite-derived surface chlorophyll a. This information is combined with a primary production model and class-specific photophysiological parameters to compute global seasonal fields of class-specific primary production over a 10-year period from January 1998 through December 2007. Microphytoplankton (mostly diatoms) appear as a major contributor to total primary production in coastal upwelling systems (70%) and temperate and subpolar regions (50%) during the spring-summer season. The contribution of picophytoplankton (e.g., prokaryotes) reaches maximum values (45%) in subtropical oligotrophic gyres. Nanophytoplankton (e.g., prymnesiophytes) provide a ubiquitous, substantial contribution (30-60%). Annual global estimates of class-specific primary production amount to 15 Gt C yr-1 (32% of total), 20 Gt C yr-1 (44%) and 11 Gt C yr-1 (24%) for micro-, nano-, and picophytoplankton, respectively. The analysis of interannual variations revealed large anomalies in class-specific primary production as compared to the 10-year mean cycle in both the productive North Atlantic basin and the more stable equatorial Pacific upwelling. Microphytoplankton show the largest range of variability of the three phytoplankton classes on seasonal and interannual time scales. Our results contribute to an understanding and quantification of carbon cycle in the ocean.

Technology Education Tackles Energy Crisis.

ERIC Educational Resources Information Center

Cutshall, Sandy

2002-01-01

Describes the solar-hydrogen technologies at the East Valley Institute of Technology, the only technology center in the nations that offers this class. Describes its focus on solving the energy crisis. (JOW)

Successful development of recombinant DNA-derived pharmaceuticals.

PubMed

Werner, R G; Pommer, C H

1990-11-01

Successful development of recombinant DNA-derived pharmaceuticals, a new class of therapeutic agents, is determined by a variety of factors affecting the selection and positioning of the compound under development. For an efficient development it is of utmost importance that the mechanism of action of the compound selected be understood on a molecular level. The compound's potential therapeutical profile and a strong patent position are key positioning considerations, as well as vital elements in shortening the development phase and protecting innovation. Installation of an interdisciplinary project management team, along with a clear definition of team members' responsibilities, is required to avoid delays and improve communication during development. Selection of the organism to be used in production must take into consideration both the structure of the protein and the quality and safety of the final product. New technologies require a considerable investment in new manufacturing facilities and equipment. Often, the decision for such an investment must be made early and with a high degree of uncertainty. Desired product yield, expected dosage, and estimated market potential are the most important considerations in this decision. Following public disclosure of the plan to develop recombinant DNA-derived products, approval of the production plant and expansion or adaptation to the new process and technology may be delayed. For this reason, they should be considered as a critical step in the overall development phase. Recruitment of qualified staff is a time-consuming and critical element of the production process. Its impact on the product timeline should not be underestimated, especially if such technologies are new to the company. The entire production process must be validated in respect to identity, purity, and safety of the product to guarantee constant product quality, as well as for safety aspects in the environment. Adequate in-process and final product controls have to be established and specifications determined for release or rejection of batches for preclinical and clinical studies as well as for marketing. Preclinical testing is limited because recombinant DNA-derived proteins cannot be differentiated from naturally occurring human proteins, and because some proteins are species-specific.

Ontology-based content analysis of US patent applications from 2001-2010.

PubMed

Weber, Lutz; Böhme, Timo; Irmer, Matthias

2013-01-01

Ontology-based semantic text analysis methods allow to automatically extract knowledge relationships and data from text documents. In this review, we have applied these technologies for the systematic analysis of pharmaceutical patents. Hierarchical concepts from the knowledge domains of chemical compounds, diseases and proteins were used to annotate full-text US patent applications that deal with pharmacological activities of chemical compounds and filed in the years 2001-2010. Compounds claimed in these applications have been classified into their respective compound classes to review the distribution of scaffold types or general compound classes such as natural products in a time-dependent manner. Similarly, the target proteins and claimed utility of the compounds have been classified and the most relevant were extracted. The method presented allows the discovery of the main areas of innovation as well as emerging fields of patenting activities - providing a broad statistical basis for competitor analysis and decision-making efforts.

Class II composite resin restorations: faster, easier, predictable.

PubMed

Jackson, R D

2016-11-18

Composite resin continues to displace amalgam as the preferred direct restorative material in developed countries. Even though composite materials have evolved to include nanoparticles with high physical properties and low shrinkage stress, dentists have been challenged to efficiently create quality, long lasting, predictable restorations. Unlike amalgam, composite resin cannot be condensed making the establishment of a predictable, proper contact more difficult. In addition, composite requires an understanding of adhesives and an appreciation for their exacting application. These facts combined with the precise adaptation and light-curing of multiple layers makes placement of quality Class II composite restorations tedious and time-consuming. For private practicing dentists, it can also have an effect on economic productivity. Clinicians have always wanted an easier, efficient placement technique for posterior composite restorations that rivals that for amalgam. It appears that advances in instrumentation, materials and technology have finally delivered it.

Advanced Class of FML on the Base Al-Li Alloy 1441 with Lower Density

NASA Astrophysics Data System (ADS)

Antipov, V. V.; Senatorova, O. G.; Lukina, N. F.

Structure, composition, properties combination of specimens and components, a number of technological parameters for production of advanced FML based on high-modulus Al-Li 1441 alloy (E 79 GPa) with reduced density (d 2.6 g/m3) and optimized adhesive prepreg reinforced with high-strength high-modulus VMP glass fibres are described. Service life 1441 alloy provides the possibility of manufacture of thin sheets (up to 0.3 mm), clad and unclad. Moreover, some experience on the usage of 1441 T1, T11 sheets and shapes in Be 200 and Be 103 aircraft was accumulated. The class of FML materials based on Al-Li alloy provide an 5% improvement in weight efficiency and stiffness of skin structures as compared with those made from FML with conventional Al-Cu-Mg (2024T3 a.o.) and Al-Zn-Mg-Cu (7475T76 a.o.) alloys.

Teachers' Participation in Professional Development Concerning the Implementation of New Technologies in Class: A Latent Class Analysis of Teachers and the Relationship with the Use of Computers, ICT Self-Efficacy and Emphasis on Teaching ICT Skills

ERIC Educational Resources Information Center

Drossel, Kerstin; Eickelmann, Birgit

2017-01-01

The increasing availability of new technologies in an ever more digitalized world has gained momentum in practically all spheres of life, making technology-related skills a key competence not only in professional settings. Thus, schools assume responsibility for imparting these skills to their students, and hence to future generations of…

EVALUATION OF THE EFFECTIVENESS OF TRUCK EFFICIENCY TECHNOLOGIES IN CLASS 8 TRACTOR-TRAILERS BASED ON A TRACTIVE ENERGY ANALYSIS USING MEASURED DRIVE CYCLE DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaClair, Tim J; Gao, Zhiming; Fu, Joshua S.

2014-01-01

Quantifying the fuel savings that can be achieved from different truck fuel efficiency technologies for a fleet s specific usage allows the fleet to select the combination of technologies that will yield the greatest operational efficiency and profitability. This paper presents an analysis of vehicle usage in a commercial vehicle fleet and an assessment of advanced efficiency technologies using an analysis of measured drive cycle data for a class 8 regional commercial shipping fleet. Drive cycle measurements during a period of a full year from six tractor-trailers in normal operations in a less-than-truckload (LTL) carrier were analyzed to develop amore » characteristic drive cycle that is highly representative of the fleet s usage. The vehicle mass was also estimated to account for the variation of loads that the fleet experienced. The drive cycle and mass data were analyzed using a tractive energy analysis to quantify the fuel efficiency and CO2 emissions benefits that can be achieved on class 8 tractor-trailers when using advanced efficiency technologies, either individually or in combination. Although differences exist among class 8 tractor-trailer fleets, this study provides valuable insight into the energy and emissions reduction potential that various technologies can bring in this important trucking application.« less

Evaluation of Commercial Agrochemicals as New Tools for Malaria Vector Control.

PubMed

Hoppé, Mark; Hueter, Ottmar F; Bywater, Andy; Wege, Philip; Maienfisch, Peter

2016-10-01

Malaria is a vector-borne and life-threatening disease caused by parasites that are transmitted to people through the bites of infected female Anopheles mosquitoes. The vector control insecticide market represents a small fraction of the crop protection market and is estimated to be valued at up to $500 million at the active ingredient level. Insecticide resistance towards the current WHOPES-approved products urgently requires the development of new tools to protect communities against the transmission of malaria. The evaluation of commercial products for malaria vector control is a viable and cost effective strategy to identify new malaria vector control products. Several examples of such spin-offs from crop protection insecticides are already evidencing the success of this strategy, namely pirimiphos-methyl for indoor residual sprays and spinosad, diflubenzuron, novaluron, and pyriproxifen for mosquito larvae control, a supplementary technology for control of malaria vectors. In our study the adulticidal activities of 81 insecticides representing 23 insecticidal modes of action classes, 34 fungicides from 6 fungicidal mode of action classes and 15 herbicides from 2 herbicidal modes of action classes were tested in a newly developed screening system. WHOPES approved insecticides for malaria vector control consistently caused 80-100% mortality of adult Anopheles stephensi at application rates between 0.2 and 20 mg active ingradient (AI) litre -1 . Chlorfenapyr, fipronil, carbosulfan and endosulfan showed the expected good activity. Four new insecticides and three fungicides with promising activity against adult mosquitoes were identified, namely the insecticides acetamiprid, thiamethoxam, thiocyclam and metaflumizone and the fungicides diflumetorin, picoxystrobin, and fluazinam. Some of these compounds certainly deserve to be further evaluated for malaria vector control. This is the first report describing good activity of commercial fungicides against malaria vectors.

Implementation of 7e learning cycle model using technology based constructivist teaching (TBCT) approach to improve students' understanding achievment in mechanical wave material

NASA Astrophysics Data System (ADS)

Warliani, Resti; Muslim, Setiawan, Wawan

2017-05-01

This study aims to determine the increase in the understanding achievement in senior high school students through the Learning Cycle 7E with technology based constructivist teaching approach (TBCT). This study uses a pretest-posttest control group design. The participants were 67 high school students of eleventh grade in Garut city with two class in control and experiment class. Experiment class applying the Learning Cycle 7E through TBCT approach and control class applying the 7E Learning Cycle through Constructivist Teaching approach (CT). Data collection tools from mechanical wave concept test with totally 22 questions with reability coefficient was found 0,86. The findings show the increase of the understanding achievement of the experiment class is in the amount of 0.51 was higher than the control class that is in the amount of 0.33.

40 CFR 82.7 - Grant and phase reduction of baseline production and consumption allowances for class I...

Code of Federal Regulations, 2010 CFR

2010-07-01

... OZONE Production and Consumption Controls § 82.7 Grant and phase reduction of baseline production and consumption allowances for class I controlled substances. For each control period specified in the following... allowances apportioned to him under §§ 82.5 and 82.6 of this subpart. Control period Class I substances in...

Fun, collaboration and formative assessment: skinquizition, a class wide gaming competition in a medical school with a large class.

PubMed

Schlegel, Elisabeth F M; Selfridge, Nancy J

2014-05-01

Formative assessments are tools for assessing content retention, providing valuable feedback to students and teachers. In medical education, information technology-supported games can accommodate large classes divided into student teams while fostering active engagement. To establish an innovative stimulating approach to formative assessments for large classes furthering collaborative skills that promotes learning and student engagement linked to improvement of academic performance. Using audience response technology, a fast-paced, competitive, interactive quiz game involving dermatology was developed. This stimulating setting, provided on the last day of class, prepares students for high-stakes exams to continue their medical education while training collaborative skills as supported by survey outcomes and average class scores. Educational game competitions provide formative assessments and feedback for students and faculty alike, enhancing learning and teaching processes. In this study, we show an innovative approach to accommodate a large class divided into competing teams furthering collaborative skills reflected by academic performance.

Introducing bio- and micro-technology into undergraduate thermal-fluids courses: investigating pipe pressure loss via atomic force microscopy.

PubMed

Müller, Marcus; Traum, Matthew J

2012-01-01

To introduce bio- and micro-technologies into general undergraduate thermal-fluids classes, a hands-on interdisciplinary in-class demonstration is described that juxtaposes classical pressure loss pipe flow experiments against a modern micro-characterization technique, AFM profilometry. Both approaches measure surface roughness and can segue into classroom discussions related to material selection and design of bio-medical devices to handle biological fluids such as blood. Appealing to the range of engineering students populating a general thermal-fluids course, a variety of pipe/hose/tube materials representing a spectrum of disciplines can be tested using both techniques. This in-class demonstration relies on technical content already available in standard thermal-fluids textbooks, provides experimental juxtaposition between classical and micro-technology-enabled approaches to the same experiment, and can be taught by personnel with no specialized micro- or bio-technology expertise.

The Core Flight System (cFS) Community: Providing Low Cost Solutions for Small Spacecraft

NASA Technical Reports Server (NTRS)

McComas, David; Wilmot, Jonathan; Cudmore, Alan

2016-01-01

In February 2015 the NASA Goddard Space Flight Center (GSFC) completed the open source release of the entire Core Flight Software (cFS) suite. After the open source release a multi-NASA center Configuration Control Board (CCB) was established that has managed multiple cFS product releases. The cFS was developed and is being maintained in compliance with the NASA Class B software development process requirements and the open source release includes all Class B artifacts. The cFS is currently running on three operational science spacecraft and is being used on multiple spacecraft and instrument development efforts. While the cFS itself is a viable flight software (FSW) solution, we have discovered that the cFS community is a continuous source of innovation and growth that provides products and tools that serve the entire FSW lifecycle and future mission needs. This paper summarizes the current state of the cFS community, the key FSW technologies being pursued, the development/verification tools and opportunities for the small satellite community to become engaged. The cFS is a proven high quality and cost-effective solution for small satellites with constrained budgets.

A new class of renewable thermoplastics with extraordinary performance from nanostructured lignin-elastomers

DOE PAGES

Chen, Jihua D.; Keum, Jong Kahk; Naskar, Amit K.; ...

2016-03-22

In this study, a new class of thermoplastic elastomers has been created by introducing nanoscale-dispersed lignin (a biomass-derived phenolic oligomer) into nitrile rubber. Temperature-induced controlled miscibility between the lignin and the rubber during high shear melt-phase synthesis allows tuning the material s morphology and performance. The sustainable product has unprecedented yield stress (15–45 MPa), strain hardens at large deformation, and has outstanding recyclability. The multiphase polymers developed from an equal-mass mixture of a melt-stable lignin fraction and nitrile rubber with optimal acrylonitrile content, using the method described here, show 5–100 nm lignin lamellae with a high-modulus rubbery interphase. Molded ormore » printed elastomeric products prepared from the lignin-nitrile material offer an additional revenue stream to pulping mills and biorefineries. Research was sponsored by the Technology Innovation Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U.S. Department of Energy. TEM (J.C. and C.D.T.) and SAXS (J.K.K.) experiments were conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility.« less

Science/Technology/Society: Model Lessons for Secondary Social Studies Classes.

ERIC Educational Resources Information Center

LaRue, Robert D., Jr., Ed.

This volume contains 36 lessons designed to be used in secondary social studies classes to introduce the science/technology/society (STS) themes and issues. While the first 11 lessons focus on general STS themes, the other 25 lessons cover specific STS issues that fall under such categories as population growth, water resources, world hunger, food…

The Clock Project: Gears as Visual-Tangible Representations for Mathematical Concepts

ERIC Educational Resources Information Center

Andrade, Alejandro

2011-01-01

As we have noticed from our own classroom experiences, children often find it difficult to identify the adequate operations learned in mathematics class when they are solving mechanical-operators problems in Technology class. We wanted to design a project that exploits the idea of a hands-on relationship between mathematics and technology to teach…

Formation of a Virtual Professional Learning Community in a Combined Local and Distance Doctoral Cohort

ERIC Educational Resources Information Center

Ford, Lance; Branch, Gracie; Moore, George

2008-01-01

A phenomenological study was conducted with a group of doctoral students preparing to be technology leaders. Students and faculty participated in weekend-intensive course work in which the faculty and some students attended classes on campus, and another group of students attended classes through distance technologies. Using some of these very…

Technological and Traditional Drawing Approaches Encourage Active Engagement in Histology Classes for Science Undergraduates

ERIC Educational Resources Information Center

Cogdell, Barbara; Torsney, Ben; Stewart, Katherine; Smith, Robert A.

2012-01-01

In order to promote more active engagement of science undergraduates in histology practical classes some technology-based innovations were introduced. First, an interactive pre-lab tutorial was set up using an electronic handset voting system, where guidance on tissue analysis was given. Second, a web-based resource where students could access…

Student Perceptions of Using Tablet Technology in Post-Secondary Classes

ERIC Educational Resources Information Center

Mang, Colin F.; Wardley, Leslie J.

2013-01-01

This paper assesses students' attitudes towards using tablets, such as the Apple iPad, in university classes. Tablets are found to be a substitute for laptop computers. Students initially expressed a great deal of optimism regarding the technology, and, although their views diminished slightly as they gained experience with using a tablet,…

A Second Look at Mobile Technology in the Classroom: Don't Ban It. Use It!

ERIC Educational Resources Information Center

Decker, James Brandon

2013-01-01

The misuse of smartphones in class frequently exasperates teachers. Instead of seeing this mobile technology as a nuisance, teachers can use it to their advantage. Smartphones can maximize collaboration, improve assessment, expand routine vocabulary lessons, augment out-of-class activities, and add multimedia tools to lessons, all while using…

Using Qualitative Data Analysis Software in Teaching about Group Work Practice

ERIC Educational Resources Information Center

Macgowan, Mark J.; Beaulaurier, Richard L.

2005-01-01

Courses on social group work have traditionally relied on in-class role plays to teach group work skills. The most common technological aid in such courses has been analog videotape. In recent years new technologies have emerged that allow the instructor to customize and tailor didactic experiences to individual classes and individual learners.…

Technology Uptake in Chinese EFL Classes

ERIC Educational Resources Information Center

Li, Li; Walsh, Steve

2011-01-01

This article presents findings from what we believe to be the first large-scale study of its kind on the use of ICT (information and communications technology) in English language classes in China. Participants are 400 EFL (English as a foreign language) teachers from different types of schools in Beijing. The purpose of the study was to examine…

Aerospace-Oriented Units for Use in Humanities Classes, Grades 7-12.

ERIC Educational Resources Information Center

Rademacher, Jean, Ed.; Williams, Mary H., Ed.

This curriculum guide, funded under ESEA Title 3, is designed to help students in English and social studies classes develop a global frame of reference and increase their awareness of advances in air and space technology. The history of aerospace technology from the first mythological references to flight to the space exploration of the future is…

A Fast, Affordable, Science and Technology SATellite (FASTSAT) and the Small Satellite Market Development Environment

NASA Technical Reports Server (NTRS)

Boudreaux, Mark; Montgomery, Edward; Cacas, Joseph

2008-01-01

The National Aeronautics and Space Administr ation at Marshall Space Flight Center and the National Space Science and Technology Center in Huntsville Alabama USA, are jointly developing a new class of science and technology mission small satellites. The Fast, Affordable, Science and Technology SATell ite (FASTSAT) was designed and developed using a new collaborative and best practices approach. The FASTSAT development, along with the new class of low cost vehicles currently being developed, would allow performance of 30 kg payload mass missions for a cost of less than 10 million US dollars.

Gothic pedagogy and Victorian reform treatises.

PubMed

Kehler, Grace

2008-01-01

This paper considers the work of bodily affect in three Victorian reform treatises about the industrial working classes: Kay's The Moral and Physical Condition of the Working Classes Employed in the Cotton Manufacture in Manchester, Chadwick's Report on the Sanitary Condition of the Labouring Population of Great Britain, and Engels's The Condition of the Working Class in England. Employing a gothic technology that graphically illustrates and appeals to the sensations, these treatises provide a striking instance of the extent to which Victorian attempts at social reform were routed through the visceral, sensible knowledge of the body. Since, however, the gothic tends toward the excessive, a second crucial feature of its technology entails the arousal of conflicting sensations that problematize class relations.

OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS & HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2004-10-01

The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit-fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all major preparations for themore » high pressure drilling campaign. Baker Hughes encountered difficulties in providing additional pumping capacity before TerraTek's scheduled relocation to another facility, thus the program was delayed further to accommodate the full testing program.« less

NDVI, C3 and C4 production, and distributions in Great Plains grassland land cover classes

USGS Publications Warehouse

Tieszen, L.L.; Reed, Bradley C.; Bliss, Norman B.; Wylie, Bruce K.; DeJong, Benjamin D.

1997-01-01

The distributions of C3 and C4 grasses were used to interpret the distribution, seasonal performance, and potential production of grasslands in the Great Plains of North America. Thirteen major grassland seasonal land cover classes were studied with data from three distinct sources. Normalized Difference Vegetation Index (NDVI) data derived from the National Oceanic and Atmospheric Administration (NOAA) Advanced Very High Resolution Radiometer (AVHRR) sensor were collected for each pixel over a 5-yr period (1989–1993), analyzed for quantitative attributes and seasonal relationships, and then aggregated by land cover class. Data from the State Soil Geographic (STATSGO) database were used to identify dominant plant species contributing to the potential production in each map unit. These species were identified as C3 or C4, and contributions to production were aggregated to provide estimates of the percentage of C3 and C4 production for each intersection of the STATSGO map units and the seasonal land cover classes. Carbon isotope values were obtained at specific sites from the soil organic matter of the upper horizon of soil cores and were related to STATSGO estimates of potential production.The grassland classes were distributed with broad northwest-to-southeast orientations. Some classes had large variations in C3 and C4 composition with high proportions of C4species in the south and low proportions in the north. This diversity of photosynthetic types within land cover classes that cross regions of different temperature and precipitation results in similar seasonal patterns and magnitudes of NDVI. The easternmost class, 65, containing tallgrass prairie components, bluestem, Indiangrass, and switchgrass, possessed the highest maximum NDVI and time-integrated NDVI values each year. Grassland classes varied over 5 yr from a high integrated NDVI mean of 4.9 in class 65 in the east to a low of 1.2 in class 76 (sand sage, blue grama, wheatgrass, and buffalograss) in the southwest. Although environmental conditions varied widely during the 5 yr, the rankings of class performance were consistent across years for these NDVI metrics. Land cover classes were less consistent in time of onset, which was often earlier in areas in the north dominated by C3 grasses than in areas to the south dominated by C4grasses. At the level of seasonal land cover classes, no significant relationship was found between the proportions of C3 and C4 species and estimates of potential production derived from the STATSGO database or inferred from the seasonal patterns of NDVI. The isotopic data from specific sites and the potential production data from STATSGO suggest similar patterns of high proportional production by C4 species throughout the south and a decline in proportional production north of the central Great Plains. The land cover classes integrate ecosystem units that encompass a wide diversity of species and C3 and C4 proportions and provide a classification that consistently captures significant ecosystem parameters for the Great Plains.

Rethinking Innovation: Disruptive Technology and Strategic Response

DTIC Science & Technology

2005-04-01

Computer News, a magazine on public sector information technology. Pierce teaches classes at the Naval Postgraduate School and recently authored Warfighting and Disruptive Technologies : Disguising Innovation.

Toxicants in Consumer Products. Household Hazardous Waste Disposal Project. Metro Toxicant Program No. 1B.

ERIC Educational Resources Information Center

Ridgley, Susan M.

Four general product classes (pesticides, paint products, household cleaners, and automotive products) are reviewed in this document. Each product class is described, and several aspects of the problem associated with product use or disposal are examined, including estimates of volumes used and environmental impacts. Technical data on the specific…

Modulation of lipoprotein metabolism by antisense technology: preclinical drug discovery methodology.

PubMed

Crooke, Rosanne M; Graham, Mark J

2013-01-01

Antisense oligonucleotides (ASOs) are a new class of specific therapeutic agents that alter the intermediary metabolism of mRNA, resulting in the suppression of disease-associated gene products. ASOs exert their pharmacological effects after hybridizing, via Watson-Crick base pairing, to a specific target RNA. If appropriately designed, this event results in the recruitment of RNase H, the degradation of targeted mRNA or pre-mRNA, and subsequent inhibition of the synthesis of a specific protein. A key advantage of the technology is the ability to selectively inhibit targets that cannot be modulated by traditional therapeutics such as structural proteins, transcription factors, and, of topical interest, lipoproteins. In this chapter, we will first provide an overview of antisense technology, then more specifically describe the status of lipoprotein-related genes that have been studied using the antisense platform, and finally, outline the general methodology required to design and evaluate the in vitro and in vivo efficacy of those drugs.

Designing a good life: a matrix for the technological mediation of morality.

PubMed

Swierstra, Tsjalling; Waelbers, Katinka

2012-03-01

Technologies fulfill a social role in the sense that they influence the moral actions of people, often in unintended and unforeseen ways. Scientists and engineers are already accepting much responsibility for the technological, economical and environmental aspects of their work. This article asks them to take an extra step, and now also consider the social role of their products. The aim is to enable engineers to take a prospective responsibility for the future social roles of their technologies by providing them with a matrix that helps to explore in advance how emerging technologies might plausibly affect the reasons behind people's (moral) actions. On the horizontal axis of the matrix, we distinguished the three basic types of reasons that play a role in practical judgment: what is the case, what can be done and what should be done. On the vertical axis we distinguished the morally relevant classes of issues: stakeholders, consequences and the good life. To illustrate how this matrix may work in practice, the final section applies the matrix to the case of the Google PowerMeter. © The Author(s) 2010. This article is published with open access at Springerlink.com

Audiovisual physics reports: students' video production as a strategy for the didactic laboratory

NASA Astrophysics Data System (ADS)

Vinicius Pereira, Marcus; de Souza Barros, Susana; de Rezende Filho, Luiz Augusto C.; Fauth, Leduc Hermeto de A.

2012-01-01

Constant technological advancement has facilitated access to digital cameras and cell phones. Involving students in a video production project can work as a motivating aspect to make them active and reflective in their learning, intellectually engaged in a recursive process. This project was implemented in high school level physics laboratory classes resulting in 22 videos which are considered as audiovisual reports and analysed under two components: theoretical and experimental. This kind of project allows the students to spontaneously use features such as music, pictures, dramatization, animations, etc, even when the didactic laboratory may not be the place where aesthetic and cultural dimensions are generally developed. This could be due to the fact that digital media are more legitimately used as cultural tools than as teaching strategies.

Mechanism of action of mRNA-based vaccines.

PubMed

Iavarone, Carlo; O'hagan, Derek T; Yu, Dong; Delahaye, Nicolas F; Ulmer, Jeffrey B

2017-09-01

The present review summarizes the growing body of work defining the mechanisms of action of this exciting new vaccine technology that should allow rational approaches in the design of next generation mRNA vaccines. Areas covered: Bio-distribution of mRNA, localization of antigen production, role of the innate immunity, priming of the adaptive immune response, route of administration and effects of mRNA delivery systems. Expert commentary: In the last few years, the development of RNA vaccines had a fast growth, the rising number of proof will enable rational approaches to improving the effectiveness and safety of this modern class of medicine.

Agile rediscovering values: Similarities to continuous improvement strategies

NASA Astrophysics Data System (ADS)

Díaz de Mera, P.; Arenas, J. M.; González, C.

2012-04-01

Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

Real-Time Payload Control and Monitoring on the World Wide Web

NASA Technical Reports Server (NTRS)

Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1998-01-01

World Wide Web (W3) technologies such as the Hypertext Transfer Protocol (HTTP) and the Java object-oriented programming environment offer a powerful, yet relatively inexpensive, framework for distributed application software development. This paper describes the design of a real-time payload control and monitoring system that was developed with W3 technologies at NASA Ames Research Center. Based on Java Development Toolkit (JDK) 1.1, the system uses an event-driven "publish and subscribe" approach to inter-process communication and graphical user-interface construction. A C Language Integrated Production System (CLIPS) compatible inference engine provides the back-end intelligent data processing capability, while Oracle Relational Database Management System (RDBMS) provides the data management function. Preliminary evaluation shows acceptable performance for some classes of payloads, with Java's portability and multimedia support identified as the most significant benefit.

Feasibility of Optimizing Recovery and Reserves from a Mature and Geological Complex Multiple Turbidite Offshore Calif. Reservoir through the Drilling and Completion of a Trilateral Horizontal Well, Class III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pacific Operators Offshore, Inc.

The intent of this project was to increase production and extend the economic life of this mature field through the application of advanced reservoir characterization and drilling technology, demonstrating the efficacy of these technologies to other small operators of aging fields. Two study periods were proposed; the first to include data assimilation and reservoir characterization and the second to drill the demonstration well. The initial study period showed that a single tri-lateral well would not be economically efficient in redevelopment of Carpinteria's multiple deep water turbidite sand reservoirs, and the study was amended to include the drilling of a seriesmore » of horizontal redrills from existing surplus well bores on Pacific Operators' Platform Hogan.« less

Training Centers for Onsite Wastewater Treatment

EPA Pesticide Factsheets

Onsite wastewater training centers offer classes, demonstration projects and research facilities for onsite industry professionals. Classes include wastewater management, new technologies and pre-licensing.

Transformation of Teacher Practice Using Mobile Technology with One-to-One Classes: M-Learning Pedagogical Approaches

ERIC Educational Resources Information Center

Lindsay, Lucie

2016-01-01

The rapid global uptake of mobile technology is reflected in pioneering New Zealand schools. Teachers of classes where each student uses a mobile device were surveyed on how frequently they use various mobile learning activities and asked to describe the new pedagogical opportunities it offers. The teachers' m-learning pedagogical approaches and…

Examining the Relationship among Students' Learning Styles, Technology Acceptance, and Students' Completion Rates in E-Learning and Traditional Class Environments

ERIC Educational Resources Information Center

Schneiderheinze, Douglas D.

2011-01-01

Distance learning is gaining popularity in many education environments. Online classes are on the increase because students need alternatives to traditional face-to-face classroom training. Time constraint on today's students coupled with the need for education to keep up with advances in technology, in all fields, has forced educators to…

An Undergraduate Laboratory Class Using CRISPR/Cas9 Technology to Mutate Drosophila Genes

ERIC Educational Resources Information Center

Adame, Vanesa; Chapapas, Holly; Cisneros, Marilyn; Deaton, Carol; Deichmann, Sophia; Gadek, Chauncey; Lovato, TyAnna L.; Chechenova, Maria B.; Guerin, Paul; Cripps, Richard M.

2016-01-01

CRISPR/Cas9 genome editing technology is used in the manipulation of genome sequences and gene expression. Because of the ease and rapidity with which genes can be mutated using CRISPR/Cas9, we sought to determine if a single-semester undergraduate class could be successfully taught, wherein students isolate mutants for specific genes using…

Pollution reduction technology program for small jet aircraft engines: Class T1

NASA Technical Reports Server (NTRS)

Bruce, T. W.; Davis, F. G.; Mongia, H. C.

1977-01-01

Small jet aircraft engines (EPA class T1, turbojet and turbofan engines of less than 35.6 kN thrust) were evaluated with the objective of attaining emissions reduction consistent with performance constraints. Configurations employing the technological advances were screened and developed through full scale rig testing. The most promising approaches in full-scale engine testing were evaluated.

E-Book Usability in Educational Technology Classes: Teachers and Teacher Candidates' Perception toward E-Book for Teaching and Learning

ERIC Educational Resources Information Center

Shin, Sunghee

2014-01-01

This study was designed to enrich the learning experiences of in-service and pre-service teachers in two educational technology classes by adopting e-books as the course material. Graduate students were more positive about their e-book reading experience than undergraduate students, but, surprisingly, more undergraduates (63.6%) became interested…

Virtual Team Meetings: Reflections on a Class Exercise Exploring Technology Choice

ERIC Educational Resources Information Center

Bull Schaefer, Rebecca A.; Erskine, Laura

2012-01-01

Students find that choosing the appropriate technology for a virtual team meeting is not as simple as it first appears. The authors describe a class exercise used to demonstrate the benefits and drawbacks of using virtual team meetings by requiring students to replace a face-to-face meeting with a virtual meeting. The exercise challenged students'…

Xenon Acquisition Strategies for High-Power Electric Propulsion NASA Missions

NASA Technical Reports Server (NTRS)

Herman, Daniel A.; Unfried, Kenneth G.

2015-01-01

Solar electric propulsion (SEP) has been used for station-keeping of geostationary communications satellites since the 1980s. Solar electric propulsion has also benefitted from success on NASA Science Missions such as Deep Space One and Dawn. The xenon propellant loads for these applications have been in the 100s of kilograms range. Recent studies performed for NASA's Human Exploration and Operations Mission Directorate (HEOMD) have demonstrated that SEP is critically enabling for both near-term and future exploration architectures. The high payoff for both human and science exploration missions and technology investment from NASA's Space Technology Mission Directorate (STMD) are providing the necessary convergence and impetus for a 30-kilowatt-class SEP mission. Multiple 30-50- kilowatt Solar Electric Propulsion Technology Demonstration Mission (SEP TDM) concepts have been developed based on the maturing electric propulsion and solar array technologies by STMD with recent efforts focusing on an Asteroid Redirect Robotic Mission (ARRM). Xenon is the optimal propellant for the existing state-of-the-art electric propulsion systems considering efficiency, storability, and contamination potential. NASA mission concepts developed and those proposed by contracted efforts for the 30-kilowatt-class demonstration have a range of xenon propellant loads from 100s of kilograms up to 10,000 kilograms. This paper examines the status of the xenon industry worldwide, including historical xenon supply and pricing. The paper will provide updated information on the xenon market relative to previous papers that discussed xenon production relative to NASA mission needs. The paper will discuss the various approaches for acquiring on the order of 10 metric tons of xenon propellant to support potential near-term NASA missions. Finally, the paper will discuss acquisitions strategies for larger NASA missions requiring 100s of metric tons of xenon will be discussed.

Characteristics and Performance of Existing Load Disaggregation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayhorn, Ebony T.; Sullivan, Greg P.; Butner, Ryan S.

2015-04-10

Non-intrusive load monitoring (NILM) or non-intrusive appliance load monitoring (NIALM) is an analytic approach to disaggregate building loads based on a single metering point. This advanced load monitoring and disaggregation technique has the potential to provide an alternative solution to high-priced traditional sub-metering and enable innovative approaches for energy conservation, energy efficiency, and demand response. However, since the inception of the concept in the 1980’s, evaluations of these technologies have focused on reporting performance accuracy without investigating sources of inaccuracies or fully understanding and articulating the meaning of the metrics used to quantify performance. As a result, the market for,more » as well as, advances in these technologies have been slowly maturing.To improve the market for these NILM technologies, there has to be confidence that the deployment will lead to benefits. In reality, every end-user and application that this technology may enable does not require the highest levels of performance accuracy to produce benefits. Also, there are other important characteristics that need to be considered, which may affect the appeal of NILM products to certain market targets (i.e. residential and commercial building consumers) and the suitability for particular applications. These characteristics include the following: 1) ease of use, the level of expertise/bandwidth required to properly use the product; 2) ease of installation, the level of expertise required to install along with hardware needs that impact product cost; and 3) ability to inform decisions and actions, whether the energy outputs received by end-users (e.g. third party applications, residential users, building operators, etc.) empower decisions and actions to be taken at time frames required for certain applications. Therefore, stakeholders, researchers, and other interested parties should be kept abreast of the evolving capabilities, uses, and characteristics of NILM that make them attractive for certain building environments and different classes of end-users. The intent of this report is to raise awareness of trending NILM approaches. Additionally, three existing technologies were acquired and evaluated using the Residential Building Stock Assessment (RBSA) owner-occupied test bed operated by the Northwest Energy Efficiency Alliance (NEEA) to understand performance accuracy of current NILM products under realistic conditions. Based on this field study experience, the characteristics exhibited by the NILM products included in the assessment are also discussed in this report in terms of ease of use, ease of installation, ability to inform decisions and actions. Results of the analysis performed to investigate the accuracy of the participating NILM products in estimating energy use of individual appliances are also presented.« less

Effect of water-to-cement ratio and curing method on the strength, shrinkage and slump of the biosand filter concrete body.

PubMed

Chan, Nicole; Young-Rojanschi, Candice; Li, Simon

2018-03-01

The biosand filter is a household-level water treatment technology used globally in low-resource settings. As of December 2016, over 900,000 biosand filters had been implemented in 60 countries around the world. Local, decentralized production is one of the main advantages of this technology, but it also creates challenges, especially in regards to quality control. Using the current recommended proportions for the biosand filter concrete mix, slump was measured at water-to-cement ratios of 0.51, 0.64 and 0.76, with two replicates for each level. Twenty-eight-day strength was tested on four replicate cylinders, each at water-to-cement ratios of 0.51, 0.59, 0.67 and 0.76. Wet curing and dry curing were compared for 28-day strength and for their effect on shrinkage. Maximum strength occurred at water-to-cement ratios of 0.51-0.59, equivalent to 8-9.3 L water for a full-scale filter assuming saturated media, corresponding to a slump class of S1 (10-40 mm). Wet curing significantly improved strength of the concrete mix and reduced shrinkage. Quality control measures such as the slump test can significantly improve the quality within decentralized production of biosand filters, despite localized differences in production conditions.

Sorbent-based Oxygen Production for Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sethi, Vijay

Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO 2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a majormore » advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, potentially 200 °C lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.« less

An assessment of a collaborative mapping approach for exploring land use patterns for several European metropolises

NASA Astrophysics Data System (ADS)

Jokar Arsanjani, Jamal; Vaz, Eric

2015-03-01

Until recently, land surveys and digital interpretation of remotely sensed imagery have been used to generate land use inventories. These techniques however, are often cumbersome and costly, allocating large amounts of technical and temporal costs. The technological advances of web 2.0 have brought a wide array of technological achievements, stimulating the participatory role in collaborative and crowd sourced mapping products. This has been fostered by GPS-enabled devices, and accessible tools that enable visual interpretation of high resolution satellite images/air photos provided in collaborative mapping projects. Such technologies offer an integrative approach to geography by means of promoting public participation and allowing accurate assessment and classification of land use as well as geographical features. OpenStreetMap (OSM) has supported the evolution of such techniques, contributing to the existence of a large inventory of spatial land use information. This paper explores the introduction of this novel participatory phenomenon for land use classification in Europe's metropolitan regions. We adopt a positivistic approach to assess comparatively the accuracy of these contributions of OSM for land use classifications in seven large European metropolitan regions. Thematic accuracy and degree of completeness of OSM data was compared to available Global Monitoring for Environment and Security Urban Atlas (GMESUA) datasets for the chosen metropolises. We further extend our findings of land use within a novel framework for geography, justifying that volunteered geographic information (VGI) sources are of great benefit for land use mapping depending on location and degree of VGI dynamism and offer a great alternative to traditional mapping techniques for metropolitan regions throughout Europe. Evaluation of several land use types at the local level suggests that a number of OSM classes (such as anthropogenic land use, agricultural and some natural environment classes) are viable alternatives for land use classification. These classes are highly accurate and can be integrated into planning decisions for stakeholders and policymakers.

The Evolution of Qualitative and Quantitative Research Classes when Delivered via Distance Education.

ERIC Educational Resources Information Center

Hecht, Jeffrey B.; Klass, Patricia H.

This study examined whether new streamed Internet audio and video technology could be used for primary instruction in off-campus research classes. Several different off-campus student cohorts at Illinois State university enrolled in both a fall semester qualitative research methods class and a spring semester quantitative research methods class.…

An Experiment Comparing HBSE Graduate Social Work Classes: Face-to-Face and at a Distance

ERIC Educational Resources Information Center

Woehle, Ralph; Quinn, Andrew

2009-01-01

This article describes a quasi-experimental comparison of two master's level social work classes delivering content on human behavior in the social environment. One class, delivered face-to-face, was largely synchronous. The other class, delivered using distance technologies, was more asynchronous than the first. The authors hypothesized that…

Xenon Acquisition Strategies for High-Power Electric Propulsion NASA Missions

NASA Technical Reports Server (NTRS)

Herman, Daniel A.; Unfried, Kenneth G.

2015-01-01

The benefits of high-power solar electric propulsion (SEP) for both NASA's human and science exploration missions combined with the technology investment from the Space Technology Mission Directorate have enabled the development of a 50kW-class SEP mission. NASA mission concepts developed, including the Asteroid Redirect Robotic Mission, and those proposed by contracted efforts for the 30kW-class demonstration have a range of xenon propellant loads from 100's of kg up to 10,000 kg. A xenon propellant load of 10 metric tons represents greater than 10% of the global annual production rate of xenon. A single procurement of this size with short-term delivery can disrupt the xenon market, driving up pricing, making the propellant costs for the mission prohibitive. This paper examines the status of the xenon industry worldwide, including historical xenon supply and pricing. The paper discusses approaches for acquiring on the order of 10 MT of xenon propellant considering realistic programmatic constraints to support potential near-term NASA missions. Finally, the paper will discuss acquisitions strategies for mission campaigns utilizing multiple high-power solar electric propulsion vehicles requiring 100's of metric tons of xenon over an extended period of time where a longer term acquisition approach could be implemented.

Automation of Presentation Record Production Based on Rich-Media Technology Using SNT Petri Nets Theory.

PubMed

Martiník, Ivo

2015-01-01

Rich-media describes a broad range of digital interactive media that is increasingly used in the Internet and also in the support of education. Last year, a special pilot audiovisual lecture room was built as a part of the MERLINGO (MEdia-rich Repository of LearnING Objects) project solution. It contains all the elements of the modern lecture room determined for the implementation of presentation recordings based on the rich-media technologies and their publication online or on-demand featuring the access of all its elements in the automated mode including automatic editing. Property-preserving Petri net process algebras (PPPA) were designed for the specification and verification of the Petri net processes. PPPA does not need to verify the composition of the Petri net processes because all their algebraic operators preserve the specified set of the properties. These original PPPA are significantly generalized for the newly introduced class of the SNT Petri process and agent nets in this paper. The PLACE-SUBST and ASYNC-PROC algebraic operators are defined for this class of Petri nets and their chosen properties are proved. The SNT Petri process and agent nets theory were significantly applied at the design, verification, and implementation of the programming system ensuring the pilot audiovisual lecture room functionality.

Automation of Presentation Record Production Based on Rich-Media Technology Using SNT Petri Nets Theory

PubMed Central

Martiník, Ivo

2015-01-01

Rich-media describes a broad range of digital interactive media that is increasingly used in the Internet and also in the support of education. Last year, a special pilot audiovisual lecture room was built as a part of the MERLINGO (MEdia-rich Repository of LearnING Objects) project solution. It contains all the elements of the modern lecture room determined for the implementation of presentation recordings based on the rich-media technologies and their publication online or on-demand featuring the access of all its elements in the automated mode including automatic editing. Property-preserving Petri net process algebras (PPPA) were designed for the specification and verification of the Petri net processes. PPPA does not need to verify the composition of the Petri net processes because all their algebraic operators preserve the specified set of the properties. These original PPPA are significantly generalized for the newly introduced class of the SNT Petri process and agent nets in this paper. The PLACE-SUBST and ASYNC-PROC algebraic operators are defined for this class of Petri nets and their chosen properties are proved. The SNT Petri process and agent nets theory were significantly applied at the design, verification, and implementation of the programming system ensuring the pilot audiovisual lecture room functionality. PMID:26258164

Assisting children with attention deficit hyperactivity disorder to reduce the hyperactive behavior of arbitrary standing in class with a Nintendo Wii remote controller through an active reminder and preferred reward stimulation.

PubMed

Shih, Ching-Hsiang; Wang, Shu-Hui; Wang, Yun-Ting

2014-09-01

Recent studies in the field of special education have shown that in combination with software technology, high-tech commercial products can be applied as useful assistive technology devices to help people with disabilities. This study extended this concept to turn a Nintendo Wii Remote Controller into a high-performance limb action detector, in order to evaluate whether two students with Attention Deficit Hyperactivity Disorder (ADHD) could reduce their hyperactive behavior through an active reminder and stimulation in the form of the participants' preferred rewards. This study focused on one particular hyperactive behavior common to both students: standing up arbitrarily during class. The active reminder was in the form of vibration feedback provided via the built-in function of the Wii Remote Controller, which was controlled and triggered by a control system to remind participants when they were engaging in standing behavior. This study was performed according to a multiple baseline design across participants. The results showed that both participants significantly improved their control over their hyperactive behavior during the intervention phase, and retained this effective performance in the maintenance phase. The practical and developmental implications of the findings are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Increased frequency of class I and II anti-human leukocyte antigen antibodies in systemic lupus erythematosus and scleroderma and associated factors: a comparative study.

PubMed

Tozkir, Hilmi; Pamuk, Omer Nuri; Duymaz, Julide; Gurkan, Hakan; Yazar, Metin; Sari, Gulce; Tanrikulu, Hazel; Pamuk, Gulsum Emel

2016-12-01

There is significant autoantibody production in systemic lupus erythematosus (SLE) and scleroderma (SSc); microchimerism is also thought to play a role in pathogenesis. We determined the frequency of anti-HLA antibodies in SLE and SSc patients and evaluated associated clinical factors. We included 77 SLE patients, 46 SSc patients and 53 healthy controls into the study. Clinical data about the patients were obtained from hospital records. Anti-human leukocyte (anti-HLA) antigen antibody analysis of sera was performed by applying Lifecodes anti-HLA Class I and Class II Screening kits based on xMAP technology. The frequencies of class I and II anti-HLA antibodies were significantly higher in SLE (27.3% and 41.6%) and SSc (26.1% and 41.3%) groups than in healthy controls (1.9% and 5.7%) (all P < 0.001). Frequencies of thrombocytopenia (P = 0.021), anti-ribonucleoprotein (P = 0.037) and anti-Ro (P = 0.027) were significantly higher in the class I antibody-positive SLE group; however, pericarditis was less frequent (P = 0.05). On the other hand, the class II antibody-positive SLE group had more frequent anti-ribosomal P antibody (P = 0.038), but less frequent active disease (P = 0.038). In the SSc group, class I antibody-positive patients had more frequent digital ulcers (P = 0.048) and anti-centromere antibodies (P = 0.01). There was no association of anti-HLA antibodies with pulmonary hypertension and interstitial fibrosis in SSc patients. Both class I and class II antibodies were found to be significantly increased in SLE and SSc. Rather than major organ involvement, anti-HLA antibodies were associated with the presence of other antibodies in both diseases. © 2014 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Rheological and molecular weight comparisons of approved hyaluronic acid products - preliminary standards for establishing class III medical device equivalence.

PubMed

Braithwaite, Gavin J C; Daley, Michael J; Toledo-Velasquez, David

2016-01-01

Hyaluronic acid of various molecular weights has been in use for the treatment of osteoarthritis knee pain for decades. Worldwide, these products are regulated as either as drugs or devices and in some countries as both. In the US, this class of products is regulated as Class III medical devices, which places specific regulatory requirements on developers of these materials under a Pre-Market Approval process, typically requiring data from prospective randomized controlled clinical studies. In 1984 pharmaceutical manufacturers became able to file an Abbreviated New Drug Application for approval of a generic drug, thus establishing standards for demonstrating equivalence to an existing chemical entity. Recently, the first biosimilar, or 'generic biologic', was approved. Biosimilars are biological products that are approved by the FDA because they are 'highly similar' to a reference product, and have been shown to have no clinically meaningful differences from the reference product. For devices, Class II medical devices have a pathway for declaring equivalence to an existing product by filing a 510 k application for FDA clearance. However, until recently no equivalent regulatory pathway was available to Class III devices. In this paper, we consider the critical mechanical performance parameters for intra-articular hyaluronic products to demonstrate indistinguishable characteristics. Analogous to the aforementioned pathways that allow for a demonstration of equivalence, we examine these parameters for an existing, marketed device and compare molecular weight and rheological properties of multiple batches of a similar product. We propose that this establishes a scientific rationale for establishing Class III medical device equivalence.

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.12 - Development of standards compliance tests for a hydrographic product or class.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The... a hydrographic product or class. (a) NOAA shall work, to the extent practicable, through existing...

15 CFR 996.13 - Determination of whether to offer certification for a hydrographic product or class.

Code of Federal Regulations, 2010 CFR

2010-01-01

... certification for a hydrographic product or class. 996.13 Section 996.13 Commerce and Foreign Trade Regulations..., DEPARTMENT OF COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The...

77 FR 30336 - Product List Changes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... POSTAL REGULATORY COMMISSION [Docket Nos. MC2012-23 and CP2012-29; Order No. 1346] Product List... recently-filed Postal Service request to add First-Class Package Service Contract 7 the competitive product... competitive product list.\\1\\ The Postal Service asserts that First- Class Package Service Contract 7 is ``a...

Limits to Open Class Performance?

NASA Technical Reports Server (NTRS)

Bowers, Albion H.

2008-01-01

This presentation discusses open or unlimited class aircraft performance limitations and design solutions. Limitations in this class of aircraft include slow climbing flight which requires low wing loading, high cruise speed which requires high wing loading, gains in induced or viscous drag alone which result in only half the gain overall and other structural problems (yaw inertia and spins, flutter and static loads integrity). Design solutions include introducing minimum induced drag for a given span (elliptical span load or winglets) and introducing minimum induced drag for a bell shaped span load. It is concluded that open class performance limits (under current rules and technologies) is very close to absolute limits, though some gains remain to be made from unexplored areas and new technologies.

Recent Advances in Exopolysaccharides from Paenibacillus spp.: Production, Isolation, Structure, and Bioactivities

PubMed Central

Liang, Tzu-Wen; Wang, San-Lang

2015-01-01

This review provides a comprehensive summary of the most recent developments of various aspects (i.e., production, purification, structure, and bioactivity) of the exopolysaccharides (EPSs) from Paenibacillus spp. For the production, in particular, squid pen waste was first utilized successfully to produce a high yield of inexpensive EPSs from Paenibacillus sp. TKU023 and P. macerans TKU029. In addition, this technology for EPS production is prevailing because it is more environmentally friendly. The Paenibacillus spp. EPSs reported from various references constitute a structurally diverse class of biological macromolecules with different applications in the broad fields of pharmacy, cosmetics and bioremediation. The EPS produced by P. macerans TKU029 can increase in vivo skin hydration and may be a new source of natural moisturizers with potential value in cosmetics. However, the relationships between the structures and activities of these EPSs in many studies are not well established. The contents and data in this review will serve as useful references for further investigation, production, structure and application of Paenibacillus spp. EPSs in various fields. PMID:25837984

Recent advances in exopolysaccharides from Paenibacillus spp.: production, isolation, structure, and bioactivities.

PubMed

Liang, Tzu-Wen; Wang, San-Lang

2015-04-01

This review provides a comprehensive summary of the most recent developments of various aspects (i.e., production, purification, structure, and bioactivity) of the exopolysaccharides (EPSs) from Paenibacillus spp. For the production, in particular, squid pen waste was first utilized successfully to produce a high yield of inexpensive EPSs from Paenibacillus sp. TKU023 and P. macerans TKU029. In addition, this technology for EPS production is prevailing because it is more environmentally friendly. The Paenibacillus spp. EPSs reported from various references constitute a structurally diverse class of biological macromolecules with different applications in the broad fields of pharmacy, cosmetics and bioremediation. The EPS produced by P. macerans TKU029 can increase in vivo skin hydration and may be a new source of natural moisturizers with potential value in cosmetics. However, the relationships between the structures and activities of these EPSs in many studies are not well established. The contents and data in this review will serve as useful references for further investigation, production, structure and application of Paenibacillus spp. EPSs in various fields.

Optimization of Deep Drilling Performance - Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2005-09-30

This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2004 through September 2005. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for amore » next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all Phase 1 testing and is planning Phase 2 development.« less

77 FR 2302 - Agency Information Collection Activities; Proposed Collection; Comment Request; Antimicrobial...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-17

... and quantities exported; and (3) a listing of the target animals, indications, and production classes... Number Firm Name Dosage Form(s) Production Class(es) Animal Species--Food Animal or Food and Non-Food...] Agency Information Collection Activities; Proposed Collection; Comment Request; Antimicrobial Animal Drug...

40 CFR 82.24 - Recordkeeping and reporting requirements for class II controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... kilograms) of production of each class II controlled substance used in processes resulting in their...) The quantity (in kilograms) of production of each class II controlled substance used in processes... processes resulting in their transformation or eventual destruction; (vi) A list of the quantities and names...

Will it Blend? Visualization and Accuracy Evaluation of High-Resolution Fuzzy Vegetation Maps

NASA Astrophysics Data System (ADS)

Zlinszky, A.; Kania, A.

2016-06-01

Instead of assigning every map pixel to a single class, fuzzy classification includes information on the class assigned to each pixel but also the certainty of this class and the alternative possible classes based on fuzzy set theory. The advantages of fuzzy classification for vegetation mapping are well recognized, but the accuracy and uncertainty of fuzzy maps cannot be directly quantified with indices developed for hard-boundary categorizations. The rich information in such a map is impossible to convey with a single map product or accuracy figure. Here we introduce a suite of evaluation indices and visualization products for fuzzy maps generated with ensemble classifiers. We also propose a way of evaluating classwise prediction certainty with "dominance profiles" visualizing the number of pixels in bins according to the probability of the dominant class, also showing the probability of all the other classes. Together, these data products allow a quantitative understanding of the rich information in a fuzzy raster map both for individual classes and in terms of variability in space, and also establish the connection between spatially explicit class certainty and traditional accuracy metrics. These map products are directly comparable to widely used hard boundary evaluation procedures, support active learning-based iterative classification and can be applied for operational use.

Recent R&D status for 70 MW class superconducting generators in the Super-GM project

NASA Astrophysics Data System (ADS)

Ageta, Takasuke

2000-05-01

Three types of 70 MW class superconducting generators called model machines have been developed to establish basic technologies for a pilot machine. The series of on-site verification tests was completed in June 1999. The world's highest generator output (79 MW), the world's longest continuous operation (1500 hours) and other excellent results were obtained. The model machine was connected to a commercial power grid and fundamental data were collected for future utilization. It is expected that fundamental technologies on design and manufacture required for a 200 MW class pilot machine are established.

Ethics in the classroom: a reflection on integrating ethical discussions in an introductory course in computer programming.

PubMed

Smolarski, D C; Whitehead, T

2000-04-01

In this paper, we describe our recent approaches to introducing students in a beginning computer science class to the study of ethical issues related to computer science and technology. This consists of three components: lectures on ethics and technology, in-class discussion of ethical scenarios, and a reflective paper on a topic related to ethics or the impact of technology on society. We give both student reactions to these aspects, and instructor perspective on the difficulties and benefits in exposing students to these ideas.

Project Integration Architecture as a Foundation for Autonomous Solution Systems: The Postulation of a Meaningful "SolveYourself" Method

NASA Technical Reports Server (NTRS)

Jones, William Henry

2005-01-01

The Project Integration Architecture (PIA) uses object-oriented technology to implement self-revelation and semantic infusion through class derivation. That is, the kind of an object can be discovered through program inquiry and the well-known, well-defined meaning of that object can be utilized as a result of that discovery. This technology has already been demonstrated by the PIA effort in its parameter object classes. It is proposed that, by building on this technology, an autonomous, automatic, goal-seeking, solution system may be devised.

Enhancing students' science literacy using solar cell learning multimedia containing science and nano technology

NASA Astrophysics Data System (ADS)

Eliyawati, Sunarya, Yayan; Mudzakir, Ahmad

2017-05-01

This research attempts to enhance students' science literacy in the aspects of students' science content, application context, process, and students' attitude using solar cell learning multimedia containing science and nano technology. The quasi-experimental method with pre-post test design was used to achieve these objectives. Seventy-two students of class XII at a high school were employed as research's subject. Thirty-six students were in control class and another thirty-six were in experiment class. Variance test (t-test) was performed on the average level of 95% to identify the differences of students' science literacy in both classes. As the result, there were significant different of learning outcomes between experiment class and control class. Almost half of students (41.67%) in experiment class are categorized as high. Therefore, the learning using solar cell learning multimedia can improve students' science literacy, especially in the students' science content, application context, and process aspects with n-gain(%) 59.19 (medium), 63.04 (medium), and 52.98 (medium). This study can be used to develop learning multimedia in other science context.

Associations among personal care product use patterns and exogenous hormone use in the NIEHS Sister Study.

PubMed

Taylor, Kyla W; Baird, Donna D; Herring, Amy H; Engel, Lawrence S; Nichols, Hazel B; Sandler, Dale P; Troester, Melissa A

2017-09-01

It is hypothesized that certain chemicals in personal care products may alter the risk of adverse health outcomes. The primary aim of this study was to use a data-centered approach to classify complex patterns of exposure to personal care products and to understand how these patterns vary according to use of exogenous hormone exposures, oral contraceptives (OCs) and post-menopausal hormone therapy (HT). The NIEHS Sister Study is a prospective cohort study of 50,884 US women. Limiting the sample to non-Hispanic blacks and whites (N=47,019), latent class analysis (LCA) was used to identify groups of individuals with similar patterns of personal care product use based on responses to 48 survey questions. Personal care products were categorized into three product types (beauty, hair, and skincare products) and separate latent classes were constructed for each type. Adjusted prevalence differences (PD) were calculated to estimate the association between exogenous hormone use, as measured by ever/never OC or HT use, and patterns of personal care product use. LCA reduced data dimensionality by grouping of individuals with similar patterns of personal care product use into mutually exclusive latent classes (three latent classes for beauty product use, three for hair, and four for skin care. There were strong differences in personal care usage by race, particularly for haircare products. For both blacks and whites, exogenous hormone exposures were associated with higher levels of product use, especially beauty and skincare products. Relative to individual product use questions, latent class variables capture complex patterns of personal care product usage. These patterns differed by race and were associated with ever OC and HT use. Future studies should consider personal care product exposures with other exogenous exposures when modeling health risks.

Associations among personal care product use patterns and exogenous hormone use in the NIEHS Sister Study

PubMed Central

Taylor, Kyla W.; Baird, Donna D.; Herring, Amy H.; Engel, Lawrence S.; Nichols, Hazel B.; Sandler, Dale P.; Troester, Melissa A.

2017-01-01

It is hypothesized that certain chemicals in personal care products may alter the risk of adverse health outcomes. The primary aim of this study was to use a data-centered approach to classify complex patterns of exposure to personal care products and to understand how these patterns vary according to use of exogenous hormone exposures, oral contraceptives (OCs) and post-menopausal hormone therapy (HT). The NIEHS Sister Study is a prospective cohort study of 50,884 US women. Limiting the sample to non-Hispanic blacks and whites (N = 47,019), latent class analysis (LCA) was used to identify groups of individuals with similar patterns of personal care product use based on responses to 48 survey questions. Personal care products were categorized into three product types (beauty, hair, and skincare products) and separate latent classes were constructed for each type. Adjusted prevalence differences (PD) were calculated to estimate the association between exogenous hormone use, as measured by ever/never OC or HT use, and patterns of personal care product use. LCA reduced data dimensionality by grouping of individuals with similar patterns of personal care product use into mutually exclusive latent classes (three latent classes for beauty product use, three for hair, and four for skin care. There were strong differences in personal care usage by race, particularly for haircare products. For both blacks and whites, exogenous hormone exposures were associated with higher levels of product use, especially beauty and skincare products. Relative to individual product use questions, latent class variables capture complex patterns of personal care product usage. These patterns differed by race and were associated with ever OC and HT use. Future studies should consider personal care product exposures with other exogenous exposures when modeling health risks. PMID:28120835

Summary and recommendations on nuclear electric propulsion technology for the space exploration initiative

NASA Technical Reports Server (NTRS)

Doherty, Michael P.; Holcomb, Robert S.

1993-01-01

A project in Nuclear Electric Propulsion (NEP) technology is being established to develop the NEP technologies needed for advanced propulsion systems. A paced approach has been suggested which calls for progressive development of NEP component and subsystem level technologies. This approach will lead to major facility testing to achieve TRL-5 for megawatt NEP for SEI mission applications. This approach is designed to validate NEP power and propulsion technologies from kilowatt class to megawatt class ratings. Such a paced approach would have the benefit of achieving the development, testing, and flight of NEP systems in an evolutionary manner. This approach may also have the additional benefit of synergistic application with SEI extraterrestrial surface nuclear power applications.

An Exploration of What Happens when Second and Third Graders in Two Countries Interact through a Technology Enhanced Multicultural Collaboration

ERIC Educational Resources Information Center

Richards, Brenda Eklund

2010-01-01

This study used qualitative methodology to document what happened when two groups of children--a second grade class in Columbia, South Carolina, U.S.A. and a third grade class in Amman, Jordan--collaborated on a technology enhanced cultural exchange. Key aspects of this project included dialogic collaboration based upon Short's (2003) model of…

Learning Specific Content in Technology Education: Learning Study as a Collaborative Method in Swedish Preschool Class Using Hands-On Material

ERIC Educational Resources Information Center

Kilbrink, Nina; Bjurulf, Veronica; Blomberg, Ingela; Heidkamp, Anja; Hollsten, Ann-Christin

2014-01-01

This article describes the process of a learning study conducted in technology education in a Swedish preschool class. The learning study method used in this study is a collaborative method, where researchers and teachers work together as a team concerning teaching and learning about a specific learning object. The object of learning in this study…

Teaching Business Statistics with Real Data to Undergraduates and the Use of Technology in the Class Room

ERIC Educational Resources Information Center

Singamsetti, Rao

2007-01-01

In this paper an attempt is made to highlight some issues of interpretation of statistical concepts and interpretation of results as taught in undergraduate Business statistics courses. The use of modern technology in the class room is shown to have increased the efficiency and the ease of learning and teaching in statistics. The importance of…

16 CFR 1025.18 - Class actions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

16 CFR § 1025.18 - Class actions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

16 CFR 1025.18 - Class actions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL RULES OF PRACTICE FOR ADJUDICATIVE..., regulation, or consumer product safety rule, or (3) Manufacturers, distributors, or retailers, or a... consumer product safety rule. When appropriate, a class may be divided into subclasses and each subclass...

"A Future for Fisheries?" Setting of a Field-based Class for Evaluation of Aquaculture and Fisheries Sustainability

NASA Astrophysics Data System (ADS)

Macko, Stephen; O'Connell, Matthew

2016-04-01

For the first time in 2015, aquaculture yields approximately equaled global wild capture fisheries. Are either of these levels of production sustainable? This course explored the limitations of both sources of fishery landings and included legal limitations, environmental concerns and technological problems and adaptations. It made use of visits to aquaculture facilities, government laboratories like NOAA , as well as large fish distribution centers like J.J. McDowell's Seafood (Jessup, MD), and included presentations by experts on legalities including the Law of the Sea. In addition, short day-long trips to "ocean-related" locations were also used to supplement the experience and included speakers involved with aquaculture. Central Virginia is a fortunate location for such a class, with close access for travel to the Chesapeake Bay and numerous field stations, museums with ocean-based exhibits (the Smithsonian and National Zoo) that address both extant and extinct Earth history, as well as national/state aquaria in Baltimore and Virginia Beach. Furthermore, visits to local seafood markets at local grocery stores, or larger city markets in Washington, Baltimore and Virginia Beach, enhance the exposure to productivity in the ocean, and viability of the fisheries sustainability. Sustainability awareness is increasingly a subject in educational settings. Marine science classes are perfect settings of establishing sustainability awareness owing to declining populations of organisms and perceived collapse in fisheries worldwide. Students in oceanography classes often request more direct exposure to actual ocean situations or field trips. This new approach to such a course supplement addresses the requests by utilizing local resources and short field trips for a limited number of students to locations in which Ocean experiences are available, and are often supported through education and outreach components. The vision of the class was a mixture of classroom time, readings, along with paper and laboratories. The course could then address not only the particulars of the marine science, but also aspects of sustainability with discussions on ethics, including keeping animals in captivity or overfishing of particular species and the special difficulties that arise from captive or culturing ocean populations. In addition, the class was encouraged to post web-based journals of experiences in order to share opinions of observations in each of the settings, including the evaluation of the foods they were consuming during the class.

Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

NASA Technical Reports Server (NTRS)

Ray, Ranjan; Jha, Sunil C.

1987-01-01

Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

A comparison of student performance in human development classes using three different modes of delivery: Online, face-to-face, and combined

NASA Astrophysics Data System (ADS)

Kalsow, Susan Christensen

1999-11-01

The problem. The dual purposes of this research were to determine if there is a difference in student performance in three Human Development classes when the modes of delivery are different and to analyze student perceptions of using Web-based learning as all or part of their course experience. Procedures. Data for this study were collected from three Human Development courses taught at Drake University. Grades from five essays, projects, and overall grades were used in the three classes and analyzed using a single factor analysis of variance to determine if there was a significant difference. Content analysis was used on the evaluation comments of the participants in the online and combined classes to determine their perceptions of Web-based learning. Findings. The single factor analysis of variance measuring student performance showed no significant difference among the online, face-to-face, and combined scores at the .05 level of significance, however, the difference was significant at the .06. The content analysis of the online and combined course showed the three major strengths of learning totally or partly online to be increased comfort in using the computer, the quality of the overall experience, and convenience in terms of increased access to educational opportunities. The barriers included lack of human interaction and access to the professor. Conclusions. The study indicates that Web-based learning is a viable option for postsecondary educational delivery in terms of student performance and learning. On the average, performance is at least as good as performance in traditional face-to-face classrooms. Improved performance, however, is contingent on adequate access to equipment, faculty skill in teaching using a new mode of delivery, and the personality of the student. The convenient access to educational opportunities and becoming more comfortable with technology are benefits that were important to these two groups. Web-based learning is not for everyone, but Web-assisted learning may be. It has the potential to reach a population of students who otherwise would not have access to postsecondary education. Recommendations. Technology in the twenty-first century will continue to explode and impact our lives. Universities and colleges have the potential to reach a more diverse population, but face-to-face learning will always have value. Consideration must be given to how technology and the use of Web-based learning can be used in varying degrees to meet the needs of students. Classes in the future should have some expected component of navigation and productive use of online learning. Web classes vary from totally online to mostly face-to-face, but all students in the twenty-first century should be expected to know and use this powerful educational resource.

Using synchronous distance-education technology to deliver a weight management intervention.

PubMed

Dunn, Carolyn; Whetstone, Lauren MacKenzie; Kolasa, Kathryn M; Jayaratne, K S U; Thomas, Cathy; Aggarwal, Surabhi; Nordby, Kelly; Riley, Kenisha E M

2014-01-01

To compare the effectiveness of online delivery of a weight management program using synchronous (real-time), distance-education technology to in-person delivery. Synchronous, distance-education technology was used to conduct weekly sessions for participants with a live instructor. Program effectiveness was indicated by changes in weight, body mass index (BMI), waist circumference, and confidence in ability to eat healthy and be physically active. Online class participants (n = 398) had significantly greater reductions in BMI, weight, and waist circumference than in-person class participants (n = 1,313). Physical activity confidence increased more for in-person than online class participants. There was no difference for healthy eating confidence. This project demonstrates the feasibility of using synchronous distance-education technology to deliver a weight management program. Synchronous online delivery could be employed with no loss to improvements in BMI, weight, and waist circumference. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Scaling up Education Reform

ERIC Educational Resources Information Center

Gaffney, Jon D. H.; Richards, Evan; Kustusch, Mary Bridget; Ding, Lin; Beichner, Robert J.

2008-01-01

The SCALE-UP (Student-Centered Activities for Large Enrollment for Undergraduate Programs) project was developed to implement reforms designed for small classes into large physics classes. Over 50 schools across the country, ranging from Wake Technical Community College to Massachusetts Institute of Technology (MIT), have adopted it for classes of…

Large Observatory for x-ray Timing (LOFT-P): a Probe-class mission concept study

NASA Astrophysics Data System (ADS)

Wilson-Hodge, Colleen A.; Ray, Paul S.; Chakrabarty, Deepto; Feroci, Marco; Alvarez, Laura; Baysinger, Michael; Becker, Chris; Bozzo, Enrico; Brandt, Soren; Carson, Billy; Chapman, Jack; Dominguez, Alexandra; Fabisinski, Leo; Gangl, Bert; Garcia, Jay; Griffith, Christopher; Hernanz, Margarita; Hickman, Robert; Hopkins, Randall; Hui, Michelle; Ingram, Luster; Jenke, Peter; Korpela, Seppo; Maccarone, Tom; Michalska, Malgorzata; Pohl, Martin; Santangelo, Andrea; Schanne, Stephane; Schnell, Andrew; Stella, Luigi; van der Klis, Michiel; Watts, Anna; Winter, Berend; Zane, Silvia

2016-07-01

LOFT-P is a mission concept for a NASA Astrophysics Probe-Class (<$1B) X-ray timing mission, based on the LOFT M-class concept originally proposed to ESAs M3 and M4 calls. LOFT-P requires very large collecting area, high time resolution, good spectral resolution, broad-band spectral coverage (2-30 keV), highly flexible scheduling, and an ability to detect and respond promptly to time-critical targets of opportunity. It addresses science questions such as: What is the equation of state of ultra dense matter? What are the effects of strong gravity on matter spiraling into black holes? It would be optimized for sub-millisecond timing of bright Galactic X-ray sources including X-ray bursters, black hole binaries, and magnetars to study phenomena at the natural timescales of neutron star surfaces and black hole event horizons and to measure mass and spin of black holes. These measurements are synergistic to imaging and high-resolution spectroscopy instruments, addressing much smaller distance scales than are possible without very long baseline X-ray interferometry, and using complementary techniques to address the geometry and dynamics of emission regions. LOFT-P would have an effective area of >6 m2, > 10x that of the highly successful Rossi X-ray Timing Explorer (RXTE). A sky monitor (2-50 keV) acts as a trigger for pointed observations, providing high duty cycle, high time resolution monitoring of the X-ray sky with 20 times the sensitivity of the RXTE All-Sky Monitor, enabling multi-wavelength and multimessenger studies. A probe-class mission concept would employ lightweight collimator technology and large-area solid-state detectors, segmented into pixels or strips, technologies which have been recently greatly advanced during the ESA M3 Phase A study of LOFT. Given the large community interested in LOFT (>800 supporters*, the scientific productivity of this mission is expected to be very high, similar to or greater than RXTE ( 2000 refereed publications). We describe the results of a study, recently completed by the MSFC Advanced Concepts Office, that demonstrates that such a mission is feasible within a NASA probe-class mission budget.

Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

NASA Technical Reports Server (NTRS)

Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

2005-01-01

This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

Estimation of a Frontier Production Function for the South Carolina Educational Process.

ERIC Educational Resources Information Center

Cooper, Samuel T.; Cohn, Elchanan

1997-01-01

Estimates frontier production functions for South Carolina's educational process, using data from 541 classes. Classes taught by teachers who received merit awards show greater mathematics and reading achievement gain scores, as do classes with fewer free-lunch students. There was a positive relationship between achievement and (larger) class…

Applications of statistical physics to technology price evolution

NASA Astrophysics Data System (ADS)

McNerney, James

Understanding how changing technology affects the prices of goods is a problem with both rich phenomenology and important policy consequences. Using methods from statistical physics, I model technology-driven price evolution. First, I examine a model for the price evolution of individual technologies. The price of a good often follows a power law equation when plotted against its cumulative production. This observation turns out to have significant consequences for technology policy aimed at mitigating climate change, where technologies are needed that achieve low carbon emissions at low cost. However, no theory adequately explains why technology prices follow power laws. To understand this behavior, I simplify an existing model that treats technologies as machines composed of interacting components. I find that the power law exponent of the price trajectory is inversely related to the number of interactions per component. I extend the model to allow for more realistic component interactions and make a testable prediction. Next, I conduct a case-study on the cost evolution of coal-fired electricity. I derive the cost in terms of various physical and economic components. The results suggest that commodities and technologies fall into distinct classes of price models, with commodities following martingales, and technologies following exponentials in time or power laws in cumulative production. I then examine the network of money flows between industries. This work is a precursor to studying the simultaneous evolution of multiple technologies. Economies resemble large machines, with different industries acting as interacting components with specialized functions. To begin studying the structure of these machines, I examine 20 economies with an emphasis on finding common features to serve as targets for statistical physics models. I find they share the same money flow and industry size distributions. I apply methods from statistical physics to show that industries cluster the same way according to industry type. Finally, I use these industry money flows to model the price evolution of many goods simultaneously, where network effects become important. I derive a prediction for which goods tend to improve most rapidly. The fastest-improving goods are those with the highest mean path lengths in the money flow network.

Kilowatt-Class Fission Power Systems for Science and Human Precursor Missions

NASA Technical Reports Server (NTRS)

Mason, Lee S.; Gibson, Marc Andrew; Poston, Dave

2013-01-01

Nuclear power provides an enabling capability for NASA missions that might otherwise be constrained by power availability, mission duration, or operational robustness. NASA and the Department of Energy (DOE) are developing fission power technology to serve a wide range of future space uses. Advantages include lower mass, longer life, and greater mission flexibility than competing power system options. Kilowatt-class fission systems, designated "Kilopower," were conceived to address the need for systems to fill the gap above the current 100-W-class radioisotope power systems being developed for science missions and below the typical 100-k We-class reactor power systems being developed for human exploration missions. This paper reviews the current fission technology project and examines some Kilopower concepts that could be used to support future science missions or human precursors.

Applied Physics Modules Selected for Architectural and Civil Drafting Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of six learning modules is equivalent to the content of a three-credit hour class in surveying and drafting technology, architectural drafting technology, building construction technology, and civil engineering technology.…

15 CFR 996.11 - Development of standards for a hydrographic product or class.

Code of Federal Regulations, 2012 CFR

2012-01-01

... COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality... class. (a) NOAA shall work, to the extent practicable, through existing, recognized, standards bodies in...

15 CFR 996.11 - Development of standards for a hydrographic product or class.

Code of Federal Regulations, 2013 CFR

2013-01-01

... COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality... class. (a) NOAA shall work, to the extent practicable, through existing, recognized, standards bodies in...

15 CFR 996.11 - Development of standards for a hydrographic product or class.

Code of Federal Regulations, 2011 CFR

2011-01-01

... COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality... class. (a) NOAA shall work, to the extent practicable, through existing, recognized, standards bodies in...

15 CFR 996.11 - Development of standards for a hydrographic product or class.

Code of Federal Regulations, 2014 CFR

2014-01-01

... COMMERCE QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES QUALITY ASSURANCE AND CERTIFICATION REQUIREMENTS FOR NOAA HYDROGRAPHIC PRODUCTS AND SERVICES The Quality... class. (a) NOAA shall work, to the extent practicable, through existing, recognized, standards bodies in...

Multilevel Classification of PISA 2015 Research Participant Countries' Literacy and These Classes' Relationship with Information and Communication Technologies

ERIC Educational Resources Information Center

Yalcin, Seher

2018-01-01

In this study, it is aimed to distinguish the reading skills of students participating in PISA 2015 application into multi-level latent classes at the student and country level. Furthermore, it is aimed to examine how the clusters emerged at country-level is predicted by variables as students have the information and communication technology (ICT)…

High Spatial Resolution Thermal Satellite Technologies

NASA Technical Reports Server (NTRS)

Ryan, Robert

2003-01-01

This document in the form of viewslides, reviews various low-cost alternatives to high spatial resolution thermal satellite technologies. There exists no follow-on to Landsat 7 or ASTER high spatial resolution thermal systems. This document reviews the results of the investigation in to the use of new technologies to create a low-cost useful alternative. Three suggested technologies are examined. 1. Conventional microbolometer pushbroom modes offers potential for low cost Landsat Data Continuity Mission (LDCM) thermal or ASTER capability with at least 60-120 ground sampling distance (GSD). 2. Backscanning could produce MultiSpectral Thermal Imager performance without cooled detectors. 3. Cooled detector could produce hyperspectral thermal class system or extremely high spatial resolution class instrument.

The future of memory

NASA Astrophysics Data System (ADS)

Marinella, M.

In the not too distant future, the traditional memory and storage hierarchy of may be replaced by a single Storage Class Memory (SCM) device integrated on or near the logic processor. Traditional magnetic hard drives, NAND flash, DRAM, and higher level caches (L2 and up) will be replaced with a single high performance memory device. The Storage Class Memory paradigm will require high speed (< 100 ns read/write), excellent endurance (> 1012), nonvolatility (retention > 10 years), and low switching energies (< 10 pJ per switch). The International Technology Roadmap for Semiconductors (ITRS) has recently evaluated several potential candidates SCM technologies, including Resistive (or Redox) RAM, Spin Torque Transfer RAM (STT-MRAM), and phase change memory (PCM). All of these devices show potential well beyond that of current flash technologies and research efforts are underway to improve the endurance, write speeds, and scalabilities to be on-par with DRAM. This progress has interesting implications for space electronics: each of these emerging device technologies show excellent resistance to the types of radiation typically found in space applications. Commercially developed, high density storage class memory-based systems may include a memory that is physically radiation hard, and suitable for space applications without major shielding efforts. This paper reviews the Storage Class Memory concept, emerging memory devices, and possible applicability to radiation hardened electronics for space.

A 0.4-2.3 GHz broadband power amplifier extended continuous class-F design technology

NASA Astrophysics Data System (ADS)

Chen, Peng; He, Songbai

2015-08-01

A 0.4-2.3 GHz broadband power amplifier (PA) extended continuous class-F design technology is proposed in this paper. Traditional continuous class-F PA performs in high-efficiency only in one octave bandwidth. With the increasing development of wireless communication, the PA is in demand to cover the mainstream communication standards' working frequencies from 0.4 GHz to 2.2 GHz. In order to achieve this objective, the bandwidths of class-F and continuous class-F PA are analysed and discussed by Fourier series. Also, two criteria, which could reduce the continuous class-F PA's implementation complexity, are presented and explained to investigate the overlapping area of the transistor's current and voltage waveforms. The proposed PA design technology is based on the continuous class-F design method and divides the bandwidth into two parts: the first part covers the bandwidth from 1.3 GHz to 2.3 GHz, where the impedances are designed by the continuous class-F method; the other part covers the bandwidth from 0.4 GHz to 1.3 GHz, where the impedance to guarantee PA to be in high-efficiency over this bandwidth is selected and controlled. The improved particle swarm optimisation is employed for realising the multi-impedances of output and input network. A PA based on a commercial 10 W GaN high electron mobility transistor is designed and fabricated to verify the proposed design method. The simulation and measurement results show that the proposed PA could deliver 40-76% power added efficiency and more than 11 dB power gain with more than 40 dBm output power over the bandwidth from 0.4-2.3 GHz.

Computer Class Role Playing Games, an innovative teaching methodology based on STEM and ICT: first experimental results

NASA Astrophysics Data System (ADS)

Maraffi, S.

2016-12-01

Context/PurposeWe experienced a new teaching and learning technology: a Computer Class Role Playing Game (RPG) to perform educational activity in classrooms through an interactive game. This approach is new, there are some experiences on educational games, but mainly individual and not class-based. Gaming all together in a class, with a single scope for the whole class, it enhances peer collaboration, cooperative problem solving and friendship. MethodsTo perform the research we experimented the games in several classes of different degrees, acquiring specific questionnaire by teachers and pupils. Results Experimental results were outstanding: RPG, our interactive activity, exceed by 50% the overall satisfaction compared to traditional lessons or Power Point supported teaching. InterpretationThe appreciation of RPG was in agreement with the class level outcome identified by the teacher after the experimentation. Our work experience get excellent feedbacks by teachers, in terms of efficacy of this new teaching methodology and of achieved results. Using new methodology more close to the student point of view improves the innovation and creative capacities of learners, and it support the new role of teacher as learners' "coach". ConclusionThis paper presents the first experimental results on the application of this new technology based on a Computer game which project on a wall in the class an adventure lived by the students. The plots of the actual adventures are designed for deeper learning of Science, Technology, Engineering, Mathematics (STEM) and Social Sciences & Humanities (SSH). The participation of the pupils it's based on the interaction with the game by the use of their own tablets or smartphones. The game is based on a mixed reality learning environment, giving the students the feel "to be IN the adventure".

Design and Preliminary Testing of a High Performance Antiproton Trap (HiPAT)

NASA Technical Reports Server (NTRS)

Martin, James; Meyer, Kirby; Kramer, Kevin; Smith, Gerald; Lewis, Raymond; Rodgers, Stephen L. (Technical Monitor)

2000-01-01

Antimatter represents the pinnacle of energy density, offering the potential to enhance current fusion/fission concepts enabling various classes of deep space missions. Current production rates are sufficient to support proof-of-concept evaluation of many key technologies associated with antimatter-derived propulsion. Storage has been identified as a key enabling technology for all antimatter-related operations, and as such is the current focus of this NASA-MSFC effort to design and fabricate a portable device capable of holding up to 10(exp 12) particles. Hardware has been assembled and initial tests are underway to evaluate the trap behavior using electron gun generated, positive hydrogen ions. Ions have been stored for tens of minutes, limited by observed interaction with background gas. Additionally, radio frequency manipulation is being tested to increase lifetime by stabilizing the stored particles, potentially reducing their interaction with background gas, easing requirements on ultimate trap vacuum and precision mechanical alignment.

[Hygienic assessment of conditions of the exploitation of facilities of the urban drainage system].

PubMed

Alikbayeva, L A; Iakubova, I Sh; Ryzhkov, A L; Lavrinova, A A; Sidorov, A A

The aim of the study was the hygienic characteristics of the location of sewage pumping stations (SPSs) in the residential area of the city and the assessment of working conditions for the staff. The features of the technological process at the SPSs resulted in the formation of specific working conditions characterized by the presence of a cooling microclimate, noise production, technological vibration, air pollution by microorganisms. The assessment of working conditions has allowed to refer them to the 3 class (harmful working conditions) of the 2 and 3 degree. Preventive measures for SPSs should include the use of equipment for cleaning the air of working zone, having a combined odourremoving and microbicidal action; the automation of the labor process; the installation of additional equipment for filtering air circulating in workplaces and emitting into the atmosphere; provision of sealing equipment with the use of noise insulating materials.

Serodiagnosis of parasitic diseases.

PubMed Central

Maddison, S E

1991-01-01

In this review on serodiagnosis of parasitic diseases, antibody detection, antigen detection, use of monoclonal antibodies in parasitic serodiagnosis, molecular biological technology, and skin tests are discussed. The focus at the Centers for Disease Control on developing improved antigens, a truly quantitative FAST-enzyme-linked immunosorbent assay, and the very specific immunoblot assays for antibody detection is highlighted. The last two assays are suitable for field studies. Identification of patient response in terms of immunoglobulin class or immunoglobulin G subclass isotypes or both is discussed. Immunoglobulin isotypes may asist in defining the stage of some diseases. In other instances, use of a particular anti-isotype conjugate may increase the specificity of the assay. Monoclonal antibodies have played important roles in antigen purification and identification, in competitive antibody assays with increased sensitivity and specificity, and in assays for antigen detection in serum, body fluids, or excreta. Molecular biological technology has allowed significant advances in the production of defined parasitic serodiagnostic antigens. PMID:1747862

[Progress in synthetic biology of pinocembrin].

PubMed

Guo, Lei; Kong, Jianqiang

2015-04-01

Pinocembrin, belonging to flavanons, was isolated from various plants. Pinocembrin has a variety of pharmacological activities, such as neuroprotective effect, antimicrobial activity, and antioxidant efficacy. Pinocembrin was approved as class I drugs to its phase II clinical trial by CFDA in 2009, mainly used for the treatment of ischemic stroke. As a promising compound, the manufacturing technologies of pinocembrin, including chemical synthesis, extraction from plant and synthetic biology, have attracted many attentions. Compared with the first two technologies, synthetic biology has many advantages, such as environment-friendly and low-cost. Construction of biosynthetic pathway in microorganism offers promising results for large scale pinocembrin production by fermentation after taking lots of effective strategies. This article reviews some of recent strategies in microorganisms to improve the yield, with focus on the selection of appropriate the key enzyme sources, the supply of precursors and cofactors by microorganisms, the choice of substance and the level of the key enzyme expression.

Eight strategies to engage industry in biosecurity.

PubMed

Gilmore, James; Lambert, Janet Lynch

2005-01-01

A significant portion of the domestic bio-research base-and the one most likely to provide translational research-is not engaged in biodefense. Despite the fact that more than one-third of all life science researchers are employed in commercial bio-research, fewer than 3% of the 1,500 U.S. bio-technology companies are involved in biosecurity initiatives. The bio-tech industry has largely not aligned itself to play an integral role in biosecurity, but there are a few policy changes that could dramatically alter this balance. These include engaging and motivating the bio-technology middle class, seeding secondary markets, focusing on system solutions, providing reagents and standards, aligning communications, and prioritizing translational research. By reaching out, policymakers can span the current chasm between the bio-industry and government, build a stable biodefense industrial base, establish solid working relationships, and secure better services and products. The rewards would be significant for government and industry alike.

Melt dispersion granules: formulation and evaluation to improve oral delivery of poorly soluble drugs - a case study with valsartan.

PubMed

Chella, Naveen; Tadikonda, Ramarao

2015-06-01

Solid dispersion (SD) technique is a promising strategy to improve the solubility and dissolution of BCS class II drugs. However, only few products are marketed till today based on SD technology due to poor flow properties and stability. The present work was intended to solve these problems by using combination approach, melt dispersion and surface adsorption technologies. The main aim of the present work is to improve the absorption in the stomach (at lower pH) where the absorption window exists for the drug by improving the dissolution, resulting in the enhancement of oral bioavailability of poorly soluble, weakly acidic drug with pH dependant solubility, i.e. valsartan. Melt dispersion granules were prepared in different ratios using different carriers (Gelucire 50/13, PEG 8000 and Pluronic F-68) and lactose as an adsorbent. Similarly, physical mixtures were also prepared at corresponding ratios. The prepared dispersion granules and physical mixtures were characterized by FTIR, DSC and in vitro dissolution studies. DSC studies revealed reduction in the crystallinity with a possibility of presence of amorphous character of drug in the dispersion granules. From dissolution studies, valsartan Gelucire dispersion (GSD4; 1:4 ratio) showed complete drug release in 30 min against the plain drug which showed only 11.31% of drug release in 30 min. Pharmacokinetic studies of optimized formulation in male Wistar rats showed 2.65-fold higher bioavailability and 1.47-fold higher Cmax compared to pure drug. The melt dispersion technology has the potential to improve dissolution and the bioavailability of BCS class II drugs.

The AstroSat Production Line: From AstroSat 100 to AstroSat 1000

NASA Astrophysics Data System (ADS)

Maliet, E.; Pawlak, D.; Koeck, C.; Beaufumé, E.

2008-08-01

From the late 90s onward, Astrium Satellites has developed and improved several classes of high resolution optical Earth Observation satellites. The resulting product line ranges from micro-satellites (about 120 kg) type to the large satellites (in the range of 1 200 kg). They all make uses of state of the art technologies for optical payloads, as well as for avionics. Several classes of platforms have thus been defined and standardised: AstroSat 100 for satellites up to 150 kg, allowing affordable but fully operational missions, AstroSat 500 for satellites up to 800 kg, allowing complex high resolution missions, and AstroSat 1000 for satellites up to 1 200 kg, providing very high resolution and outstanding imaging and agility capabilities. A new class, AstroSat 250, has been developed by Astrium Satellites, and is now proposed, offering a state-of-the-art 3-axis agile platform for high- resolution missions, with a launch mass below 550 kg. The Astrosat platforms rely on a centralised architecture avionics based on an innovative AOCS hybridising of measurements from GPS, stellar sensors and inertial reference unit. Operational safety has been emphasised through thruster free safe modes. All optical payloads make use of all Silicon Carbide (SiC) telescopes. High performance and low consumption linear CCD arrays provide state of the art images. The satellites are designed for simple flight operations, large data collection capability, and large versatility of payload and missions. They are adaptable to a large range of performances. Astrium satellites have already been selected by various customers worldwide.

Demonstration of Enabling Spar-Shell Cooling Technology in Gas Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Downs, James

2014-12-29

In this Advanced Turbine Program-funded Phase III project, Florida Turbine Technologies, Inc. (FTT) has developed and tested, at a pre-commercial prototypescale, spar-shell turbine airfoils in a commercial gas turbine. The airfoil development is based upon FTT’s research and development to date in Phases I and II of Small Business Innovative Research (SBIR) grants. During this program, FTT has partnered with an Original Equipment Manufacturer (OEM), Siemens Energy, to produce sparshell turbine components for the first pre-commercial prototype test in an F-Class industrial gas turbine engine and has successfully completed validation testing. This project will further the commercialization of this newmore » technology in F-frame and other highly cooled turbine airfoil applications. FTT, in cooperation with Siemens, intends to offer the spar-shell vane as a first-tier supplier for retrofit applications and new large frame industrial gas turbines. The market for the spar-shell vane for these machines is huge. According to Forecast International, 3,211 new gas turbines units (in the >50MW capacity size range) will be ordered in ten years from 2007 to 2016. FTT intends to enter the market in a low rate initial production. After one year of successful extended use, FTT will quickly ramp up production and sales, with a target to capture 1% of the market within the first year and 10% within 5 years (2020).« less

9 CFR 381.170 - Standards for kinds and classes, and for cuts of raw poultry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Standards for kinds and classes, and for cuts of raw poultry. 381.170 Section 381.170 Animals and Animal Products FOOD SAFETY AND... of raw poultry. (a) The following standards specify the various classes of the specified kinds of...

9 CFR 381.170 - Standards for kinds and classes, and for cuts of raw poultry.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Standards for kinds and classes, and for cuts of raw poultry. 381.170 Section 381.170 Animals and Animal Products FOOD SAFETY AND... of raw poultry. (a) The following standards specify the various classes of the specified kinds of...

40 CFR 82.17 - Apportionment of baseline production allowances for class II controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... allowances for class II controlled substances. 82.17 Section 82.17 Protection of Environment ENVIRONMENTAL... Consumption Controls § 82.17 Apportionment of baseline production allowances for class II controlled... 1,759,681 MDA Manufacturing HCFC-22 2,383,835 Solvay Solexis HCFC-142b 6,541,764 [ 74 FR 66446, Dec...

40 CFR 144.80 - What is a Class V injection well?

Code of Federal Regulations, 2013 CFR

2013-07-01

... process; (2) In situ production of uranium or other metals; this category includes only in situ production... described in § 144.6, injection wells are classified as follows: (a) Class I. (1) Wells used by generators...) Class II. Wells which inject fluids: (1) Which are brought to the surface in connection with natural gas...

40 CFR 144.80 - What is a Class V injection well?

Code of Federal Regulations, 2014 CFR

2014-07-01

... process; (2) In situ production of uranium or other metals; this category includes only in situ production... described in § 144.6, injection wells are classified as follows: (a) Class I. (1) Wells used by generators...) Class II. Wells which inject fluids: (1) Which are brought to the surface in connection with natural gas...

40 CFR 144.80 - What is a Class V injection well?

Code of Federal Regulations, 2012 CFR

2012-07-01

... process; (2) In situ production of uranium or other metals; this category includes only in situ production... described in § 144.6, injection wells are classified as follows: (a) Class I. (1) Wells used by generators...) Class II. Wells which inject fluids: (1) Which are brought to the surface in connection with natural gas...

40 CFR 144.80 - What is a Class V injection well?

Code of Federal Regulations, 2011 CFR

2011-07-01

... process; (2) In situ production of uranium or other metals; this category includes only in situ production... described in § 144.6, injection wells are classified as follows: (a) Class I. (1) Wells used by generators...) Class II. Wells which inject fluids: (1) Which are brought to the surface in connection with natural gas...

The status of US multi-campus colleges and schools of pharmacy.

PubMed

Harrison, Lauren C; Congdon, Heather Brennan; DiPiro, Joseph T

2010-09-10

To assess the current status of multi-campus colleges and schools of pharmacy within the United States. Data on multi-campus programs, technology, communication, and opinions regarding benefits and challenges were collected from Web sites, e-mail, and phone interviews from all colleges and schools of pharmacy with students in class on more than 1 campus. Twenty schools and colleges of pharmacy (18 public and 2 private) had multi-campus programs; 16 ran parallel campuses and 4 ran sequential campuses. Most programs used synchronous delivery of classes. The most frequently reported reasons for establishing the multi-campus program were to have access to a hospital and/or medical campus and clinical resources located away from the main campus and to increase class size. Effectiveness of distance education technology was most often sited as a challenge. About 20% of colleges and schools of pharmacy have multi-campus programs most often to facilitate access to clinical resources and to increase class size. These programs expand learning opportunities and face challenges related to technology, resources, and communication.

The Status of US Multi-campus Colleges and Schools of Pharmacy

PubMed Central

Harrison, Lauren C.; DiPiro, Joseph T.

2010-01-01

Objective To assess the current status of multi-campus colleges and schools of pharmacy within the United States. Methods Data on multi-campus programs, technology, communication, and opinions regarding benefits and challenges were collected from Web sites, e-mail, and phone interviews from all colleges and schools of pharmacy with students in class on more than 1 campus. Results Twenty schools and colleges of pharmacy (18 public and 2 private) had multi-campus programs; 16 ran parallel campuses and 4 ran sequential campuses. Most programs used synchronous delivery of classes. The most frequently reported reasons for establishing the multi-campus program were to have access to a hospital and/or medical campus and clinical resources located away from the main campus and to increase class size. Effectiveness of distance education technology was most often sited as a challenge. Conclusion About 20% of colleges and schools of pharmacy have multi-campus programs most often to facilitate access to clinical resources and to increase class size. These programs expand learning opportunities and face challenges related to technology, resources, and communication. PMID:21088729

High throughput screening technologies for ion channels

PubMed Central

Yu, Hai-bo; Li, Min; Wang, Wei-ping; Wang, Xiao-liang

2016-01-01

Ion channels are involved in a variety of fundamental physiological processes, and their malfunction causes numerous human diseases. Therefore, ion channels represent a class of attractive drug targets and a class of important off-targets for in vitro pharmacological profiling. In the past decades, the rapid progress in developing functional assays and instrumentation has enabled high throughput screening (HTS) campaigns on an expanding list of channel types. Chronologically, HTS methods for ion channels include the ligand binding assay, flux-based assay, fluorescence-based assay, and automated electrophysiological assay. In this review we summarize the current HTS technologies for different ion channel classes and their applications. PMID:26657056

Advances in NSAID development: evolution of diclofenac products using pharmaceutical technology.

PubMed

Altman, Roy; Bosch, Bill; Brune, Kay; Patrignani, Paola; Young, Clarence

2015-05-01

Diclofenac is a nonsteroidal anti-inflammatory drug (NSAID) of the phenylacetic acid class with anti-inflammatory, analgesic, and antipyretic properties. Contrary to the action of many traditional NSAIDs, diclofenac inhibits cyclooxygenase (COX)-2 enzyme with greater potency than it does COX-1. Similar to other NSAIDs, diclofenac is associated with serious dose-dependent gastrointestinal, cardiovascular, and renal adverse effects. Since its introduction in 1973, a number of different diclofenac-containing drug products have been developed with the goal of improving efficacy, tolerability, and patient convenience. Delayed- and extended-release forms of diclofenac sodium were initially developed with the goal of improving the safety profile of diclofenac and providing convenient, once-daily dosing for the treatment of patients with chronic pain. New drug products consisting of diclofenac potassium salt were associated with faster absorption and rapid onset of pain relief. These include diclofenac potassium immediate-release tablets, diclofenac potassium liquid-filled soft gel capsules, and diclofenac potassium powder for oral solution. The advent of topical formulations of diclofenac enabled local treatment of pain and inflammation while minimizing systemic absorption of diclofenac. SoluMatrix diclofenac, consisting of submicron particles of diclofenac free acid and a proprietary combination of excipients, was developed to provide analgesic efficacy at reduced doses associated with lower systemic absorption. This review illustrates how pharmaceutical technology has been used to modify the pharmacokinetic properties of diclofenac, leading to the creation of novel drug products with improved clinical utility.

32 CFR 37.1375 - Technology investment agreements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement of...

32 CFR 37.1375 - Technology investment agreements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement of...

32 CFR 37.1375 - Technology investment agreements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement of...

32 CFR 37.1375 - Technology investment agreements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement of...

32 CFR 37.1375 - Technology investment agreements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement of...

Bolivian satellite technology program on ERTS natural resources

NASA Technical Reports Server (NTRS)

Brockmann, H. C. (Principal Investigator); Bartoluccic C., L.; Hoffer, R. M.; Levandowski, D. W.; Ugarte, I.; Valenzuela, R. R.; Urena E., M.; Oros, R.

1977-01-01

The author has identified the following significant results. Application of digital classification for mapping land use permitted the separation of units at more specific levels in less time. A correct classification of data in the computer has a positive effect on the accuracy of the final products. Land use unit comparison with types of soils as represented by the colors of the coded map showed a class relation. Soil types in relation to land cover and land use demonstrated that vegetation was a positive factor in soils classification. Groupings of image resolution elements (pixels) permit studies of land use at different levels, thereby forming parameters for the classification of soils.

Wideband pulse amplifiers for the NECTAr chip

NASA Astrophysics Data System (ADS)

Sanuy, A.; Delagnes, E.; Gascon, D.; Sieiro, X.; Bolmont, J.; Corona, P.; Feinstein, F.; Glicenstein, J.-F.; Naumann, C. L.; Nayman, P.; Ribó, M.; Tavernet, J.-P.; Toussenel, F.; Vincent, P.; Vorobiov, S.

2012-12-01

The NECTAr collaboration's FE option for the camera of the CTA is a 16 bits and 1-3 GS/s sampling chip based on analog memories including most of the readout functions. This works describes the input amplifiers of the NECTAr ASIC. A fully differential wideband amplifier, with voltage gain up to 20 V/V and a BW of 400 MHz. As it is impossible to design a fully differential OpAmp with an 8 GHz GBW product in a 0.35 CMOS technology, an alternative implementation based on HF linearized transconductors is explored. The output buffer is a class AB miller operational amplifier, with special non-linear current boost.

Advanced Computational Methods for Thermal Radiative Heat Transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tencer, John; Carlberg, Kevin Thomas; Larsen, Marvin E.

2016-10-01

Participating media radiation (PMR) in weapon safety calculations for abnormal thermal environments are too costly to do routinely. This cost may be s ubstantially reduced by applying reduced order modeling (ROM) techniques. The application of ROM to PMR is a new and unique approach for this class of problems. This approach was investigated by the authors and shown to provide significant reductions in the computational expense associated with typical PMR simulations. Once this technology is migrated into production heat transfer analysis codes this capability will enable the routine use of PMR heat transfer in higher - fidelity simulations of weaponmore » resp onse in fire environments.« less

Advanced Subsonic Airplane Design and Economic Studies

NASA Technical Reports Server (NTRS)

Liebeck, Robert H.; Andrastek, Donald A.; Chau, Johnny; Girvin, Raquel; Lyon, Roger; Rawdon, Blaine K.; Scott, Paul W.; Wright, Robert A.

1995-01-01

A study was made to examine the effect of advanced technology engines on the performance of subsonic airplanes and provide a vision of the potential which these advanced engines offered. The year 2005 was selected as the entry-into-service (EIS) date for engine/airframe combination. A set of four airplane classes (passenger and design range combinations) that were envisioned to span the needs for the 2005 EIS period were defined. The airframes for all classes were designed and sized using 2005 EIS advanced technology. Two airplanes were designed and sized for each class: one using current technology (1995) engines to provide a baseline, and one using advanced technology (2005) engines. The resulting engine/airframe combinations were compared and evaluated on the basis on sensitivity to basic engine performance parameters (e.g. SFC and engine weight) as well as DOC+I. The advanced technology engines provided significant reductions in fuel burn, weight, and wing area. Average values were as follows: reduction in fuel burn = 18%, reduction in wing area = 7%, and reduction in TOGW = 9%. Average DOC+I reduction was 3.5% using the pricing model based on payload-range index and 5% using the pricing model based on airframe weight. Noise and emissions were not considered.

[Testing methods for the characterization of catheter balloons and lumina].

PubMed

Werner, C; Rössler, K; Deckert, F

1995-10-01

The present paper reports on the characterization of catheter balloons and lumina on the basis of such known parameters as residual volume, compliance, burst pressure and flow rate, with the aim of developing standards, test methods and testing equipment as well as standards. These are becoming ever more important with the coming into force of the EC directive on medical products [7] and the law governing medical products in Germany [13], which requires manufacturers to specify the properties of their products. Our testing concept is based on a commercially available machine that subjects materials to alternating extension and compression forces over the long-term, to which we added a special hydraulic module. Using the multimedia technology we achieved a real time superimposition of the volume-diameter curve on the balloon. The function of the testing device and method is demonstrated on dilatation catheters. Our initial results reveal compatibility with the requirements of the 1% accuracy class. Use of this methodology for comparative testing of catheters and quality evaluation is recommended.

Applications of pharmacogenomics in regulatory science: a product life cycle review.

PubMed

Tan-Koi, W C; Leow, P C; Teo, Y Y

2018-05-22

With rapid developments of pharmacogenomics (PGx) and regulatory science, it is important to understand the current PGx integration in product life cycle, impact on clinical practice thus far and opportunities ahead. We conducted a cross-sectional review on PGx-related regulatory documents and implementation guidelines in the United States and Europe. Our review found that although PGx-related guidance in both markets span across the entire product life cycle, the scope of implementation guidelines varies across two continents. Approximately one-third of Food and Drug Administration (FDA)-approved drugs with PGx information in drug labels and half of the European labels posted on PharmGKB website contain recommendations on genetic testing. The drugs affected 19 and 15 World Health Organization Anatomical Therapeutic Chemical drug classes (fourth level) in the United States and Europe, respectively, with protein kinase inhibitors (13 drugs in the United States and 16 drugs in Europe) being most prevalent. Topics of emerging interest were novel technologies, adaptive design in clinical trial and sample collection.

Process balance and product quality in the production of natural indigo from Polygonum tinctorium Ait. applying low-technology methods.

PubMed

Bechtold, T; Turcanu, A; Geissler, S; Ganglberger, E

2002-02-01

Indigo is the most important blue component in the class of natural dyes for cellulose and protein fibres. In the moderate European climate Polygonum tinctorium Ait. could be an interesting source for natural indigo (Vat blue 1). Following a cultivation of the plant material a simple procedure for the extraction of the indigo precursor indican was investigated with regard to crop and quality of dye obtained. The dependence of the crop on the storage conditions of the harvested plant material was investigated. The results quantify the distinct sensitivity of the fresh material to the time of storage before extraction with regard to the amount of natural indigo obtained, the photometrically determined indigo content in the product and the shade and colour depth observed in standardised dyeing experiments. A basic set of data is presented, which describes the process in terms of consumption of energy, water and chemicals and organic waste released from the extraction step.

Advancing understanding of microbial bioenergy conversion processes by activity-based protein profiling

DOE PAGES

Liu, Yun; Fredrickson, James K.; Sadler, Natalie C.; ...

2015-09-25

Here, the development of renewable biofuels is a global priority, but success will require novel technologies that greatly improve our understanding of microbial systems biology. An approach with great promise in enabling functional characterization of microbes is activity-based protein profiling (ABPP), which employs chemical probes to directly measure enzyme function in discrete enzyme classes in vivo and/or in vitro, thereby facilitating the rapid discovery of new biocatalysts and enabling much improved biofuel production platforms. We review general design strategies in ABPP, and highlight recent advances that are or could be pivotal to biofuels processes including applications of ABPP to cellulosicmore » bioethanol, biodiesel, and phototrophic production of hydrocarbons. We also examine the key challenges and opportunities of ABPP in renewable biofuels research. The integration of ABPP with molecular and systems biology approaches will shed new insight on the catalytic and regulatory mechanisms of functional enzymes and their synergistic effects in the field of biofuels production.« less

Multi-scale process and supply chain modelling: from lignocellulosic feedstock to process and products

PubMed Central

Hosseini, Seyed Ali; Shah, Nilay

2011-01-01

There is a large body of literature regarding the choice and optimization of different processes for converting feedstock to bioethanol and bio-commodities; moreover, there has been some reasonable technological development in bioconversion methods over the past decade. However, the eventual cost and other important metrics relating to sustainability of biofuel production will be determined not only by the performance of the conversion process, but also by the performance of the entire supply chain from feedstock production to consumption. Moreover, in order to ensure world-class biorefinery performance, both the network and the individual components must be designed appropriately, and allocation of resources over the resulting infrastructure must effectively be performed. The goal of this work is to describe the key challenges in bioenergy supply chain modelling and then to develop a framework and methodology to show how multi-scale modelling can pave the way to answer holistic supply chain questions, such as the prospects for second generation bioenergy crops. PMID:22482032

[Rationale for differentiated sanitary protection zones for battery recycling enterprises in modern conditions].

PubMed

Pinigin, M A; Popov, B A; Sabirova, Z F; Budarina, O V; Ul'ianova, A V

2013-01-01

In the paper there is presented the rationale for differentiated sanitary protective zones in the present conditions both of the increase of volumes of production and introduction of various technological solutions on the example of battery recycling enterprise. It is established that the in acting regulations the classification of enterprises recycling of non-ferrous metals, fails to take into account such the hazard risks criteria of the enterprise, as volume of emissions of priority substances, the height of their arrival in the atmosphere, etc., and also does not take into account increased significantly in the current time processing volumes. The results of the performed research allowed to offer new positions in the classification of production of secondary lead from used batteries (I to IV class), depending on the volume of production (from 20 000 to 160 000 tons per year), the amount of emissions of lead (0.2 to 1, 6 tons per year) and release height (15 to 60 m).

Analysis of high-frequency energy in long-term average spectra of singing, speech, and voiceless fricatives.

PubMed

Monson, Brian B; Lotto, Andrew J; Story, Brad H

2012-09-01

The human singing and speech spectrum includes energy above 5 kHz. To begin an in-depth exploration of this high-frequency energy (HFE), a database of anechoic high-fidelity recordings of singers and talkers was created and analyzed. Third-octave band analysis from the long-term average spectra showed that production level (soft vs normal vs loud), production mode (singing vs speech), and phoneme (for voiceless fricatives) all significantly affected HFE characteristics. Specifically, increased production level caused an increase in absolute HFE level, but a decrease in relative HFE level. Singing exhibited higher levels of HFE than speech in the soft and normal conditions, but not in the loud condition. Third-octave band levels distinguished phoneme class of voiceless fricatives. Female HFE levels were significantly greater than male levels only above 11 kHz. This information is pertinent to various areas of acoustics, including vocal tract modeling, voice synthesis, augmentative hearing technology (hearing aids and cochlear implants), and training/therapy for singing and speech.

Intelligent Tutor

NASA Technical Reports Server (NTRS)

1990-01-01

NASA also seeks to advance American education by employing the technology utilization process to develop a computerized, artificial intelligence-based Intelligent Tutoring System (ITS) to help high school and college physics students. The tutoring system is designed for use with the lecture and laboratory portions of a typical physics instructional program. Its importance lies in its ability to observe continually as a student develops problem solutions and to intervene when appropriate with assistance specifically directed at the student's difficulty and tailored to his skill level and learning style. ITS originated as a project of the Johnson Space Center (JSC). It is being developed by JSC's Software Technology Branch in cooperation with Dr. R. Bowen Loftin at the University of Houston-Downtown. Program is jointly sponsored by NASA and ACOT (Apple Classrooms of Tomorrow). Other organizations providing support include Texas Higher Education Coordinating Board, the National Research Council, Pennzoil Products Company and the George R. Brown Foundation. The Physics I class of Clear Creek High School, League City, Texas are providing the classroom environment for test and evaluation of the system. The ITS is a spinoff product developed earlier to integrate artificial intelligence into training/tutoring systems for NASA astronauts flight controllers and engineers.

Lecture archiving on a larger scale at the University of Michigan and CERN

NASA Astrophysics Data System (ADS)

Herr, Jeremy; Lougheed, Robert; Neal, Homer A.

2010-04-01

The ATLAS Collaboratory Project at the University of Michigan has been a leader in the area of collaborative tools since 1999. Its activities include the development of standards, software and hardware tools for lecture archiving, and making recommendations for videoconferencing and remote teaching facilities. Starting in 2006 our group became involved in classroom recordings, and in early 2008 we spawned CARMA, a University-wide recording service. This service uses a new portable recording system that we developed. Capture, archiving and dissemination of rich multimedia content from lectures, tutorials and classes are increasingly widespread activities among universities and research institutes. A growing array of related commercial and open source technologies is becoming available, with several new products introduced in the last couple years. As the result of a new close partnership between U-M and CERN IT, a market survey of these products was conducted and a summary of the results are presented here. It is informing an ambitious effort in 2009 to equip many CERN rooms with automated lecture archiving systems, on a much larger scale than before. This new technology is being integrated with CERN's existing webcast, CDS, and Indico applications.

Infrared spectroscopic ellipsometry in semiconductor manufacturing

NASA Astrophysics Data System (ADS)

Guittet, Pierre-Yves; Mantz, Ulrich; Weidner, Peter; Stehle, Jean-Louis; Bucchia, Marc; Bourtault, Sophie; Zahorski, Dorian

2004-05-01

Infrared spectroscopic ellipsometry (IRSE) metrology is an emerging technology in semiconductor production environment. Infineon Technologies SC300 implemented the first worldwide automated IRSE in a class 1 clean room in 2002. Combining properties of IR light -- large wavelength, low absorption in silicon -- with a short focus optics -- no backside reflection -- which allow model-based analysis, a large number of production applications were developed. Part of Infineon IRSE development roadmap is now focused on depth monitoring for arrays of 3D dry-etched structures. In trench DRAM manufacturing, the areal density is high, and critical dimensions are much lower than mid-IR wavelength. Therefore, extensive use of effective medium theory is made to model 3D structures. IR-SE metrology is not limited by shrinking critical dimensions, as long as the areal density is above a specific cut-off value determined by trenches dimensions, trench-filling and surrounding materials. Two applications for depth monitoring are presented. 1D models were developed and successfully applied to the DRAM trench capacitor structures. Modeling and correlation to reference methods are shown as well as dynamic repeatability and gauge capability results. Limitations of the current tool configuration are reviewed for shallow structures.

Future Carrier-Based Tactical Aircraft Study

DOT National Transportation Integrated Search

1996-03-01

This report describes an aircraft database which was developed to identify technology trends for several classes of tactical naval aircraft, including subsonic attack, supersonic fighter, and supersonic multimission aircraft classes. This study used ...

75 FR 3988 - New Postal Product

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-26

... agreement may contain letters, the prices paid under the agreement are higher than six times the rate for the current price of a one-ounce, single-piece First-Class Mail letter. Id., para. (e). It also...--Market Dominant Products 1000 Market Dominant Product List First-Class Mail Single-Piece Letters...

Computer Applications in Class and Transportation Scheduling. Educational Management Review Series Number 1.

ERIC Educational Resources Information Center

Piele, Philip K.

This document shows how computer technology can aid educators in meeting demands for improved class scheduling and more efficient use of transportation resources. The first section surveys literature on operational systems that provide individualized scheduling for students, varied class structures, and maximum use of space and staff skills.…

"Class-Bucks": A Motivational Tool to Encourage Active Student Participation during Lectures

ERIC Educational Resources Information Center

de Jager, T.

2013-01-01

The purpose of this study was to ascertain the influence of an extrinsic motivational tool, "class-bucks," on the possibility of improving first year student-teachers' participation in active learning at Tshwane University of Technology in South Africa. Research participants (n=289) were divided into four classes and engaged in this…

40 CFR 82.3 - Definitions for class I and class II controlled substances.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sell one (1) kilogram of class I, Group VI controlled substances from inventory produced or imported... for pre-plant uses means the privilege granted by this subpart to produce or import one (1) kilogram... substance at a destruction efficiency of 98 percent or greater, using one of the destruction technologies...

40 CFR 82.3 - Definitions for class I and class II controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sell one (1) kilogram of class I, Group VI controlled substances from inventory produced or imported... for pre-plant uses means the privilege granted by this subpart to produce or import one (1) kilogram... substance at a destruction efficiency of 98 percent or greater, using one of the destruction technologies...

40 CFR 82.3 - Definitions for class I and class II controlled substances.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sell one (1) kilogram of class I, Group VI controlled substances from inventory produced or imported... for pre-plant uses means the privilege granted by this subpart to produce or import one (1) kilogram... substance at a destruction efficiency of 98 percent or greater, using one of the destruction technologies...

40 CFR 82.3 - Definitions for class I and class II controlled substances.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sell one (1) kilogram of class I, Group VI controlled substances from inventory produced or imported... for pre-plant uses means the privilege granted by this subpart to produce or import one (1) kilogram... substance at a destruction efficiency of 98 percent or greater, using one of the destruction technologies...

40 CFR 82.3 - Definitions for class I and class II controlled substances.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sell one (1) kilogram of class I, Group VI controlled substances from inventory produced or imported... for pre-plant uses means the privilege granted by this subpart to produce or import one (1) kilogram... substance at a destruction efficiency of 98 percent or greater, using one of the destruction technologies...

Online Class Review: Using Streaming-Media Technology

ERIC Educational Resources Information Center

Loudon, Marc; Sharp, Mark

2006-01-01

We present an automated system that allows students to replay both audio and video from a large nonmajors' organic chemistry class as streaming RealMedia. Once established, this system requires no technical intervention and is virtually transparent to the instructor. This gives students access to online class review at any time. Assessment has…

Written Justifications to Multiple-Choice Concept Questions during Active Learning in Class

ERIC Educational Resources Information Center

Koretsky, Milo D.; Brooks, Bill J.; Higgins, Adam Z.

2016-01-01

Increasingly, instructors of large, introductory STEM courses are having students actively engage during class by answering multiple-choice concept questions individually and in groups. This study investigates the use of a technology-based tool that allows students to answer such questions during class. The tool also allows the instructor to…

Comparing Students' Attitudes towards the Use of Traditional and Alternative Assessment Practices.

ERIC Educational Resources Information Center

DeMauro, Tom; Helphrey, Traci; Schram, Greg; Spiekermann, Carrie

This paper describes a program designed to compare students' attitudes towards the use of traditional and alternative assessment practices. The targeted population consisted of a second and third grade general education class, a third grade physical education class, and an eighth grade applied technology class in three communities in northern…

Using Classroom Response Technology to Create an Active Learning Environment in Marketing Classes

ERIC Educational Resources Information Center

Muncy, James A.; Eastman, Jacqueline K.

2012-01-01

Classroom response systems (CRS), also called student/audience response systems or clickers, have been used by business instructors, particularly in larger classes, to allow instructors to ask students questions in class and have their responses immediately tabulated and reported electronically. While clickers have typically been used to measure…

Attitudes of Prospective High School Mathematics Teachers towards Integrating Information Technologies into Their Future Teaching.

ERIC Educational Resources Information Center

Hazzan, Orit

This paper examines why the number of high school mathematics teachers who integrate computers into their math classes remains relatively low by analyzing the attitudes of prospective high school mathematics teachers. Data were gathered from written questionnaires and class discussions of four classes of prospective high school mathematics…

A Study of Coordination Between Mathematics and Chemistry in the Pre-Technical Program.

ERIC Educational Resources Information Center

Loiseau, Roger A.

This research was undertaken to determine whether the mathematics course offered to students taking courses in chemical technology was adequate. Students in a regular class and an experimental class were given mathematics and chemistry pretests and posttests. The experimental class was taught using a syllabus designed to maximize the coherence…

Whole-Class Scaffolding for Learning to Solve Mathematics Problems Together in a Computer-Supported Environment

ERIC Educational Resources Information Center

Abdu, Rotem; Schwarz, Baruch; Mavrikis, Manolis

2015-01-01

We investigate teachers' practices in a whole-class context when they scaffold students' learning in situations where students use technologies that facilitate group learning to solve mathematical problems in small groups. We describe teachers' practices in order to evaluate their contribution to "Whole-Class Scaffolding" in the context…

The Flipped Classroom: An Opportunity to Engage Millennial Students through Active Learning Strategies

ERIC Educational Resources Information Center

Roehl, Amy; Reddy, Shweta Linga; Shannon, Gayla Jett

2013-01-01

"Flipping" the classroom employs easy-to-use, readily accessible technology in order to free class time from lecture. This allows for an expanded range of learning activities during class time. Using class time for active learning versus lecture provides opportunities for greater teacher-to-student mentoring, peer-to-peer collaboration…

Before You Ban: Law Students' In-Class Laptop Usage and Academic Performance

ERIC Educational Resources Information Center

Morse, Kimberly Ann

2016-01-01

Legal educators are routinely banning students' laptops or wireless connectivity in law classes. Faculty assumes students are significantly off-task and in-class laptops are harmful to learning. Current research focuses almost exclusively on undergraduate students technology uses in- and out of the classroom. Only a handful of studies objectively…

SCALE(ing)-UP Teaching: A Case Study of Student Motivation in an Undergraduate Course

ERIC Educational Resources Information Center

Chittum, Jessica R.; McConnell, Kathryne Drezek; Sible, Jill

2017-01-01

Teaching large classes is increasingly common; thus, demand for effective large-class pedagogy is rising. One method, titled "SCALE-UP" (Student-Centered Active Learning Environment for Undergraduate Programs), is intended for large classes and involves collaborative, active learning in a technology-rich and student-centered environment.…

25 CFR 543.20 - What are the minimum internal control standards for information technology and information...

Code of Federal Regulations, 2013 CFR

2013-04-01

... information technology and information technology data? 543.20 Section 543.20 Indians NATIONAL INDIAN GAMING... § 543.20 What are the minimum internal control standards for information technology and information... prevent the concealment of fraud. (4) Information technology agents having access to Class II gaming...

25 CFR 543.20 - What are the minimum internal control standards for information technology and information...

Code of Federal Regulations, 2014 CFR

2014-04-01

... information technology and information technology data? 543.20 Section 543.20 Indians NATIONAL INDIAN GAMING... § 543.20 What are the minimum internal control standards for information technology and information... prevent the concealment of fraud. (4) Information technology agents having access to Class II gaming...

The Effects of Educational Technology upon the Critical Thinking and Analytical Skills of Below Grade-Level and or Non-College Bound High School Students.

ERIC Educational Resources Information Center

Santavenere, Alex

An action research study was undertaken to examine the effects of educational technology resources on critical thinking and analytical skills. The researcher observed 3 different 11th grade classes, a total of 75 students, over a week as they worked in the school's computer lab. Each class was composed of 25 to 30 students, all of whom were…

Mobile Devices: A Distraction, or a Useful Tool to Engage Nursing Students?

PubMed

Gallegos, Cara; Nakashima, Hannah

2018-03-01

Engaging nursing students in theoretical courses, such as research, can be challenging. Innovative instructional strategies are essential to engage nursing students in theoretical nursing courses. This article describes an educational innovation using technology as a tool in an undergraduate nursing research class. All students in the course received iPads for the semester. Lecture material was presented in class using Nearpod, an interactive presentation embedded with slides, multimedia components, and learning activities. Students reported that using the mobile technology helped them minimize off-task activities, interact more with each other and the instructor, solve problems in the class, and develop skills and confidence related to their career. Allowing device use in the classroom, such as iPads and interactive mobile applications, can be a useful learning tool. Intentional use of technology and pedagogy can increase engagement and interaction with students. [J Nurs Educ. 2018;57(3):170-173.]. Copyright 2018, SLACK Incorporated.

Assessment of the Treatability of Toxic Organics by Overland Flow,

DTIC Science & Technology

1983-01-01

Tab’ I . Occunrence of organic chemsicals in household products . (After Hathaway 1980.1 Product Classter of organ iCs Product Classe of organirs...volatilization. the various classes of organics and their presence in Another important property of organic chemicals household products are given in Table 1...23 iv TABLES Table Page I. Occurrence of organic chemicals in household

Technology perspectives in the future exploration of extreme environments

NASA Astrophysics Data System (ADS)

Cutts, J.; Balint, T.; Kolawa, El.; Peterson, C.

2007-08-01

Solar System exploration is driven by high priority science goals and objectives at diverse destinations, as described in the NRC Decadal Survey and in NASA's 2006 Solar System Exploration (SSE) Roadmap. Proposed missions to these targets encounter extreme environments, including high or low temperatures, high pressure, corrosion, high heat flux, radiation and thermal cycling. These conditions are often coupled, such as low temperature and high radiation at Europa; and high temperature and high pressure near the surface of Venus. Mitigation of these environmental conditions frequently reaches beyond technologies developed for terrestrial applications, for example, by the automotive and oil industries. Therefore, space agencies require dedicated technology developments to enable these future missions. Within NASA, proposed missions are divided into three categories. Competed small (Discovery class) and medium (New Frontiers class) missions are cost capped, thus limiting significant technology developments. Therefore, large (Flagship class) missions are required not only to tackle key science questions which can't be addressed by smaller missions, but also to develop mission enabling technologies that can feed forward to smaller missions as well. In a newly completed extreme environment technology assessment at NASA, we evaluated technologies from the current State of Practice (SoP) to advanced concepts for proposed missions over the next decades. Highlights of this report are discussed here, including systems architectures, such as hybrid systems; protection systems; high temperature electronics; power generation and storage; mobility technologies; sample acquisition and mechanisms; and the need to test these technologies in relevant environments. It is expected that the findings - documented in detail in NASA's Extreme Environments Technologies report - would help identifying future technology investment areas, and in turn enable or enhance planned SSE missions, while reducing mission cost and risk.

Finding Sales Promotion and Making Decision for New Product Based on Group Analysis of Edge-Enhanced Product Networks

NASA Astrophysics Data System (ADS)

Huang, Yi; Tan, Jianbin; Wu, Bin

A novel method is proposed in this paper to find the promotive relationship of products from a network point of view. Firstly, a product network is built based on the dataset of handsets’ sale information collected from all outlets of a telecom operator of one province of China, with a period from Jan. 2006 to Jul. 2008. Then the edge enhanced model is applied on product network to divide all the products into several groups, according to which each outlet is assigned to class A or class B for a certain handset. Class A is defined as the outlet which sell the certain handset and contains all of handsets of its group, while other situation for class B which sell the certain handset too. It’s shown from the result of analysis on these two kinds of outlets that many handsets are sold better in outlets of class A than that of class B, even though the sales revenue of all these outlets in the time period is close. That is to say the handsets within a group would promote the sale for each other. Furthermore, a method proposed in this paper gives a way to find out the important attributes of the handsets which lead them to br divided into the same group, and it also explains how to add a new handset to an existing group and where would the new handset be sold best.

VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan

DTIC Science & Technology

2014-06-01

1472G. VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan and Preliminary Results © Her Majesty the Queen in Right of...19 th International Command and Control Research and Technology Symposium Title: VICTORIA Class Submarine Human-in-the-Loop...TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE VICTORIA Class Submarine Human-in-the-Loop Experimentation Plan 5a. CONTRACT

Secure Integration of Radio Frequency Identification (RFID) Technology into a Supply Chain

DTIC Science & Technology

2005-09-01

serves as the rough equivalent of a license plate on an automobile . Figure 1 (below) illustrates the typical construction of an RFID tag. An antenna...writable passive tags (RW) Reprogrammable Class 3 Semi-active tags Reprogrammable Class 4 Active tags Reprogrammable Class 5 Readers... Reprogrammable Table 1. EPC Tag Classes[3]. Table 2 summarizes the advantages, disadvantages and applications of each type of tag. Tag Type Advantages

Manufacturing and Security Challenges in 3D Printing

NASA Astrophysics Data System (ADS)

Zeltmann, Steven Eric; Gupta, Nikhil; Tsoutsos, Nektarios Georgios; Maniatakos, Michail; Rajendran, Jeyavijayan; Karri, Ramesh

2016-07-01

As the manufacturing time, quality, and cost associated with additive manufacturing (AM) continue to improve, more and more businesses and consumers are adopting this technology. Some of the key benefits of AM include customizing products, localizing production and reducing logistics. Due to these and numerous other benefits, AM is enabling a globally distributed manufacturing process and supply chain spanning multiple parties, and hence raises concerns about the reliability of the manufactured product. In this work, we first present a brief overview of the potential risks that exist in the cyber-physical environment of additive manufacturing. We then evaluate the risks posed by two different classes of modifications to the AM process which are representative of the challenges that are unique to AM. The risks posed are examined through mechanical testing of objects with altered printing orientation and fine internal defects. Finite element analysis and ultrasonic inspection are also used to demonstrate the potential for decreased performance and for evading detection. The results highlight several scenarios, intentional or unintentional, that can affect the product quality and pose security challenges for the additive manufacturing supply chain.

Assessment of the discrimination of animal fat by FT-Raman spectroscopy

NASA Astrophysics Data System (ADS)

Abbas, O.; Fernández Pierna, J. A.; Codony, R.; von Holst, C.; Baeten, V.

2009-04-01

In recent years, there has been an increased attention towards the composition of feeding fats. In the aftermath of the BSE crisis all animal by-products utilised in animal nutrition have been subjected to close scrutiny. Regulation requires that the material belongs to the category of animal by-products fit for human consumption. This implies the use of reliable techniques in order to insure the safety of products. The feasibility of using rapid and non-destructive methods, to control the composition of feedstuffs on animal fats has been studied. Fourier Transform Raman spectroscopy has been chosen for its advantage to give detailed structural information. Data were treated using chemometric methods as PCA and PLS-DA which have permitted to separate well the different classes of animal fats. The same methodology was applied on fats from various types of feedstock and production technology processes. PLS-DA model for the discrimination of animal fats from the other categories presents a sensitivity and a specificity of 0.958 and 0.914, respectively. These results encourage the use of FT-Raman spectroscopy to discriminate animal fats.

Applied Physics Modules Selected for Electrical and Electronic Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of twenty-three learning modules is equivalent to the content of two quarters of a five-credit hour class in electrical technology, electronic service technology, electronic engineering technology, or electromechanical…

Magnify: A Final Technical Report of the American Energy and Manufacturing Competitiveness Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, Charles

The energy landscape has undergone profound transformation, with dramatic shifts having an impact on U.S. productivity, global investment, manufacturing operations, and job creation. The sense of urgency for a tighter linkage between clean technologies, energy and advanced manufacturing has only grown. Prior to 2009, the tone of the nation’s energy conversation was centered on how to deal with long-standing energy security challenges and scarcity. Today, the tone is focused on seizing emerging energy growth opportunities to transform America’s industrial base and job creation outlook—centering on energy abundance and strength. In this context, the Council on Competitiveness and the Department ofmore » Energy’s Office of Energy Efficiency & Renewable Energy (EERE) teamed in the American Energy & Manufacturing Competitiveness (AEMC) Partnership to tackle two major goals via a multi-year partnership. The AEMC Partnership identified means to: • Increase U.S. competitiveness in the production of clean energy products • Increase U.S. manufacturing competitiveness across the board by increasing energy productivity The AEMC Partnership has engaged hundreds of leaders from industry, academia, labor and government in a series of 9 regional, progressive dialogues; original research; and 4 national summits. The AEMC dialogues and summits spanned the United States—taking place in our nation’s greatest manufacturing, research, technology and innovation hotspots. The goals of the AEMC Partnership have been straightforward: • State and define key barriers, challenges, and problems in U.S. competitiveness in manufacturing of clean energy products, energy efficiency products, and advanced manufacturing products. • Dive deeply into these problems and generate policies, solutions, concepts and models where the U.S. public and private sectors can work together to solve these problems. • Catalyze policy solutions—including models for public-private partnership (PPP) pilots—to increase competitive manufacturing of clean energy and energy efficiency products in the USA. • Elevate and increase awareness of the importance and benefits of competitive clean energy manufacturing. • Understand how energy game-changers, like breakthrough technologies, impact U.S. clean energy and energy efficient manufacturing. The Council on Competitiveness worked with its stakeholder network to generate potential PPP concepts and proposals to advance the goals of the AEMC Partnership. Magnify outlines 2 PPP concepts—honed by dialogues, conversations, interviews and research—that could be carried out by EERE and/or the Council to increase the competitive production of clean energy products, energy efficient products, and advanced manufacturing in the USA. Magnify’s 2 PPP concepts aim to bridge very specific gaps in the nation’s innovation ecosystem: • Clean Energy Materials Accelerator: This PPP concept focuses on reducing the risks associated with deploying newly developed materials in commercial products and processes by creating a platform to identify and address common challenges; increasing access to existing materials qualification and characterization tools; and creating standards for advanced materials with leaders in industry, academic, government, and other organizations. Why accelerate materials production? As the AEMC Partnership Dialogue and supporting research from the public and private sectors have documented, countries that lead in making next-generation materials will gain significant competitive advantage by unleashing a new wave of manufacturing innovation. • Manufacturing and Energy Technology Accelerator: This PPP concept is a new, physical and virtual collaborative resource platform designed to connect the nation’s world-class innovation institutions—SMEs, large multinational companies, universities, national laboratories, etc.—to facilitate the transition of cutting-edge clean energy technologies into products, processes, or services that are manufactured in the United States. Why should public and private sector leaders in innovation partner to co-create a scale-up platform? The United States is already a mecca for the world’s greatest minds in science and technology—drawn to our shores by world-class universities and opportunities to work with global leaders in innovation. Unfortunately, when it comes time to bring their ideas to market, technologists and entrepreneurs often choose, or are forced, to locate manufacturing overseas. The United States must regain its position in the world as a national scale-up platform for next-generation technologies. A thorough explanation of these PPP concepts and the rationale behind these recommendations is provided in Part 3 of Magnify. Magnify is an important step on the critical journey to define barriers, challenges and problems in the manufacturing of clean energy products and energy efficient products—and further honing concepts for scalable, public-private partnerships—to increase the competitive manufacturing of clean energy and energy efficient products, and the energy productivity throughout the U.S. manufactur¬ing sector. The rest of the world is waking up to the opportunities associated with a strategic focus on manufacturing and energy competitiveness. Global competition is on the rise, and the stakes are high for the United States to act now, to act decisively, and to leverage inherent strengths to ensure a more prosperous, competitive future for decades to come.« less

Lecture-Capture Software and the Teaching of Soils

NASA Astrophysics Data System (ADS)

Brevik, Eric C.

2014-05-01

Several companies now offer software that can record academic lectures and place them on password-protected course websites for future review by students. Using lecture-capture software offers several advantages for the instructor and the students, including: 1) The ability for students who miss class for legitimate reasons (e.g., participation in school-sanctioned extra-curricular activities, illness or family emergencies) to get lecture materials by logging into the class website. This provides these students with a more complete exposure to the material than simply copying a classmate's notes. 2) The instructor is able to direct students who miss class for legitimate reasons to the recorded lecture rather than needing to spend time going over the material with those students and that recap does not end up being rushed. 3) The ability to address course conflicts for graduating seniors by allowing them to take the lecture portion of the class via recorded lecture. 4) Students who desire more in-depth learning are able to go back to selected portions of previous lectures to review and reconsider a topic of discussion or to fill in vague sections of their notes. There are also potential disadvantages to the use of lecture-capture software, including: 1) decreased student attendance in class because they feel they can watch class later at a time of their own choosing, 2) additional time spent by the instructor dealing with the technology, and 3) problems with hardware or software during class time that prevents recording a given day's lecture. These problems can often be addressed or justified relatively easily. If problem 1 is of concern to an instructor it can be addressed by blocking online access to individual students who have a poor record of class attendance. In the case of problem 2, the extra time spent with the technology is often offset by a reduction in time answering questions from students who have missed class. Problem 3 does happen, but in the author's experience it is fairly rare, representing less than 5% of class sessions per semester. Student comments have been overwhelmingly favorable towards the use of captured lectures since the technology was first adopted in the author's classes in 2009.

Improving Student Success in Calculus: A Comparison of Four College Calculus Classes

NASA Astrophysics Data System (ADS)

Bagley, Spencer Franklin

The quality of education in science, technology, engineering, and mathematics (STEM) fields is an issue of particular educational and economic importance, and Calculus I is a linchpin course in STEM major tracks. A national study is currently being conducted examining the characteristics of successful programs in college calculus (CSPCC, 2012). In work related to the CSPCC program, this study examines the effects on student outcomes of four different teaching strategies used at a single institution. The four classes were a traditional lecture, a lecture with discussion, a lecture incorporating both discussion and technology, and an inverted model. This dissertation was guided by three questions: (1) What impact do these four instructional approaches have on students' persistence, beliefs about mathematics, and conceptual and procedural achievement in calculus? (2) How do students at the local institution compare to students in the national database? And (3) How do the similarities and differences in opportunities for learning presented in the four classes contribute to the similarities and differences in student outcomes? Quantitative analysis of surveys and exams revealed few statistically significant differences in outcomes, and students in the inverted classroom often had poorer outcomes than those in other classes. Students in the technology-enhanced class scored higher on conceptual items on the final exam than those in other classes. Comparing to the national database, local students had similar switching rates but less expert-like attitudes and beliefs about mathematics than the national average. Qualitative analysis of focus group interviews, classroom observations, and student course evaluations showed that several implementation issues, some the result of pragmatic constraints, others the result of design choice, weakened affordances provided by innovative features and shrunk the differences between classes. There were substantial differences between the inverted classroom in this study and successful implementations in the literature. I identified a set of departures that forms a list of best practices for inverting classrooms. Students in all classes felt that prior calculus experience was a prerequisite for their current calculus class, and that class sessions felt rushed. These concerns implicate the constraints imposed by the curriculum shared by the four classes.

Development and regulation of biosimilars: current status and future challenges.

PubMed

Tsiftsoglou, Asterios S; Ruiz, Sol; Schneider, Christian K

2013-06-01

Biologic medicinal products developed via rDNA technology as recombinant protein-based medicines that have been in clinical use since the early 1980s as original biopharmaceuticals have greatly contributed to the therapy of severe metabolic and degenerative diseases. The recent expiration of the data protection or patents for most of them created opportunities for the development of copy versions of original biopharmaceuticals with similar biologic activity (termed biosimilars). Production of these new products is expected to meet worldwide demand, promote market competition, maintain the incentives for innovation, and sustain the healthcare systems. The licencing of these products, however, relies on the experience gained with the original biopharmaceuticals. Critical issues related to this class of medicinal products include their terminology (to avoid confusion with generics and non-innovator copy versions that have not been tested according to the biosimilar guidelines), manufacturing, and regulation. The European Union (EU) has been the first to establish a regulatory framework for marketing authorization application (MAA) and has named these products biosimilars, a term also recently adopted by the US FDA. Unlike the conventional, more common small molecular weight human medicines and chemical generics, protein-based medicines exhibit higher molecular weight, complexity in structure and function that can be affected by changes in the manufacturing process. Therefore, biosimilars represent a relatively heterogeneous class of medicinal products that make their regulation quite challenging. According to the current understanding in the EU, a biosimilar is a copy version of an already authorized biopharmaceutical (or reference product) with similar biologic activity, physicochemical characteristics, efficacy, and safety, based on a full comparability exercise at quality, preclinical and clinical level to ensure similar efficacy and safety. Guidance has been provided through several Committee for Medicinal Products for Human Use (CHMP) guidelines as well as individual scientific advice requested from the European Medicines Agency (EMA) by various companies for the development and regulation of biosimilars. This review is mainly focused on the current status of regulation of biosimilars in the EU as well as on future challenges lying ahead for the improvement of the requirements needed for the marketing authorization of biosimilars. Emphasis is given on the quality requirements concerning these medicinal products (biologics).

Advancements Toward Oil-Free Rotorcraft Propulsion

NASA Technical Reports Server (NTRS)

Howard, Samuel A.; Bruckner, Robert J.; Radil, Kevin C.

2010-01-01

NASA and the Army have been working for over a decade to advance the state-of-the-art (SOA) in Oil-Free Turbomachinery with an eye toward reduced emissions and maintenance, and increased performance and efficiency among other benefits. Oil-Free Turbomachinery is enabled by oil-free gas foil bearing technology and relatively new high-temperature tribological coatings. Rotorcraft propulsion is a likely candidate to apply oil-free bearing technology because the engine size class matches current SOA for foil bearings and because foil bearings offer the opportunity for higher speeds and temperatures and lower weight, all critical issues for rotorcraft engines. This paper describes an effort to demonstrate gas foil journal bearing use in the hot section of a full-scale helicopter engine core. A production engine hot-core location is selected as the candidate foil bearing application. Rotordynamic feasibility, bearing sizing, and load capability are assessed. The results of the program will help guide future analysis and design in this area by documenting the steps required and the process utilized for successful application of oil-free technology to a full-scale engine.

ANALYTICAL CHEMISTRY RESEARCH NEEDS FOR ...

EPA Pesticide Factsheets

The consensus among environmental scientists and risk assessors is that the fate and effects of pharmaceutical and personal care products (PPCPS) in the environment are poorly understood. Many classes of PPCPs have yet to be investigated. Acquisition of trends data for a suite of PPCPs (representatives from each of numerous significant classes), shown to recur amongst municipal wastewater treatment plants across the country, may prove of key importance. The focus of this paper is an overview of some of the analytical methods being developed at the Environmenental Protection Agency and their application to wastewater and surface water samples. Because PPCPs are generally micro-pollutants, emphasis is on development of enrichment and pre- concentration techniques using various means of solid-phase extraction. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCP

Cryopreservation and other assisted reproductive technologies for the conservation of threatened amphibians and reptiles: bringing the ARTs up to speed.

PubMed

Clulow, John; Clulow, Simon

2016-06-01

Amphibians and reptiles are experiencing serious declines, with the number of threatened species and extinctions growing rapidly as the modern biodiversity crisis unfolds. For amphibians, the panzootic of chytridiomycosis is a major driver. For reptiles, habitat loss and harvesting from the wild are key threats. Cryopreservation and other assisted reproductive technologies (ARTs) could play a role in slowing the loss of amphibian and reptile biodiversity and managing threatened populations through genome storage and the production of live animals from stored material. These vertebrate classes are at different stages of development in cryopreservation and other ARTs, and each class faces different technical challenges arising from the separate evolutionary end-points of their reproductive biology. For amphibians, the generation of live offspring from cryopreserved spermatozoa has been achieved, but the cryopreservation of oocytes and embryos remains elusive. With reptiles, spermatozoa have been cryopreserved in a few species, but no offspring from cryopreserved spermatozoa have been reported, and the generation of live young from AI has only occurred in a small number of species. Cryopreservation and ARTs are more developed and advanced for amphibians than reptiles. Future work on both groups needs to concentrate on achieving proof of concept examples that demonstrate the use of genome storage and ARTs in successfully recovering threatened species to increase awareness and support for this approach to conservation.

Biosynthetic Potential-Based Strain Prioritization for Natural Product Discovery: A Showcase for Diterpenoid-Producing Actinomycetes

PubMed Central

2015-01-01

Natural products remain the best sources of drugs and drug leads and serve as outstanding small-molecule probes to dissect fundamental biological processes. A great challenge for the natural product community is to discover novel natural products efficiently and cost effectively. Here we report the development of a practical method to survey biosynthetic potential in microorganisms, thereby identifying the most promising strains and prioritizing them for natural product discovery. Central to our approach is the innovative preparation, by a two-tiered PCR method, of a pool of pathway-specific probes, thereby allowing the survey of all variants of the biosynthetic machineries for the targeted class of natural products. The utility of the method was demonstrated by surveying 100 strains, randomly selected from our actinomycete collection, for their biosynthetic potential of four classes of natural products, aromatic polyketides, reduced polyketides, nonribosomal peptides, and diterpenoids, identifying 16 talented strains. One of the talented strains, Streptomyces griseus CB00830, was finally chosen to showcase the discovery of the targeted classes of natural products, resulting in the isolation of three diterpenoids, six nonribosomal peptides and related metabolites, and three polyketides. Variations of this method should be applicable to the discovery of other classes of natural products. PMID:24484381

Stress-induced alterations in interferon production and class II histocompatibility antigen expression

NASA Technical Reports Server (NTRS)

Sonnenfeld, G.; Cunnick, J. E.; Armfield, A. V.; Wood, P. G.; Rabin, B. S.

1992-01-01

Mild electric foot-shock has been shown to be a stressor that can alter immune responses. Male Lewis rats were exposed to one session of 16 5.0-s 1.6-mA foot-shocks. Production of interferon-gamma by splenocytes in response to concanavalin-A was decreased in spleens from the shocked rats compared to control spleens. Spleen cells from rats treated with nadolol, a peripherally acting beta-adrenergic receptor antagonist, and then shocked, showed dose-dependent attenuation of the suppression of interferon-gamma production. This suggests that catecholamines mediate shock-induced suppression of interferon-gamma production. The percentage of splenic mononuclear cells expressing class II histocompatibility (Ia) antigens on their surfaces from spleens of shocked rats was determined by flow cytometry. Significantly decreased class II positive mononuclear cells were present in the spleens of shocked rats in comparison to the spleens of control rats. This may reflect an alteration of cell trafficking or decreased production of class II antigens.

Technology in Adult Education ESOL Classes

ERIC Educational Resources Information Center

Ball, Nancy

2011-01-01

Today's world is filled with technology resources such as cellphones, iPods, laptops and the internet. By using these technological resources, adult education ESOL teachers can improve instruction, boost learning and better prepare students for real world English use. This article examines advantages of technology use and offers examples of…

Self-Regulated Out-of-Class Language Learning with Technology

ERIC Educational Resources Information Center

Lai, Chun; Gu, Mingyue

2011-01-01

Current computer-assisted language learning (CALL) research has identified various potentials of technology for language learning. To realize and maximize these potentials, engaging students in self-initiated use of technology for language learning is a must. This study investigated Hong Kong university students' use of technology outside the…

Applied Physics Modules Selected for Manufacturing and Metal Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of eighteen learning modules is equivalent to the content of two quarters of a five-credit hour class in manufacturing engineering technology, machine tool and design technology, welding technology, and industrial plastics…

From Computer Lab to Technology Class.

ERIC Educational Resources Information Center

Sherwood, Sandra

1999-01-01

Discussion of integrating technology into elementary school classrooms focuses on teacher training that is based on a three-year plan developed at an elementary school in Marathon, New York. Describes the role of a technology teacher who facilitates technology integration by running the computer lab, offering workshops, and developing inservice…

78 FR 30331 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... Registration; Meridian Medical Technologies By Notice dated March 7, 2012, and published in the Federal Register on March 13, 2013, 78 FR 15974, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis... that the registration of Meridian Medical Technologies to import the basic class of controlled...

78 FR 64019 - Manufacturer of Controlled Substances; Notice of Registration; Agilent Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

...; Notice of Registration; Agilent Technologies By Notice dated May 24, 2013, and published in the Federal Register on June 4, 2013, 78 FR 33441, Agilent Technologies, 25200 Commercentre Drive, Lake Forest... of Agilent Technologies to manufacture the listed basic classes of controlled substances is...

77 FR 43864 - Manufacturer of Controlled Substances; Notice of Registration; Rhodes Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

...; Notice of Registration; Rhodes Technologies By Notice dated April 17, 2012, and published in the Federal Register on April 26, 2012, 77 FR 24986, Rhodes Technologies, 498 Washington Street, Coventry, Rhode Island... Technologies to manufacture the listed basic classes of controlled substances is consistent with the public...

78 FR 49547 - Manufacturer of Controlled Substances, Notice of Registration, Rhodes Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

..., Notice of Registration, Rhodes Technologies By Notice dated April 10, 2013, and published in the Federal Register on April 19, 2013, 78 FR 23596, Rhodes Technologies, 498 Washington Street, Coventry, Rhode Island... registration of Rhodes Technologies to manufacture the listed basic classes of controlled substances is...

21 CFR 25.34 - Devices and electronic products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Devices and electronic products. 25.34 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Categorical Exclusions § 25.34 Devices and electronic products. The classes... substitutes. (c) Issuance, amendment, or repeal of a standard for a class II medical device or an electronic...

21 CFR 25.34 - Devices and electronic products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Devices and electronic products. 25.34 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Categorical Exclusions § 25.34 Devices and electronic products. The classes... substitutes. (c) Issuance, amendment, or repeal of a standard for a class II medical device or an electronic...

21 CFR 25.34 - Devices and electronic products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Devices and electronic products. 25.34 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Categorical Exclusions § 25.34 Devices and electronic products. The classes... substitutes. (c) Issuance, amendment, or repeal of a standard for a class II medical device or an electronic...

21 CFR 25.34 - Devices and electronic products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Devices and electronic products. 25.34 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Categorical Exclusions § 25.34 Devices and electronic products. The classes... substitutes. (c) Issuance, amendment, or repeal of a standard for a class II medical device or an electronic...

21 CFR 25.34 - Devices and electronic products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Devices and electronic products. 25.34 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Categorical Exclusions § 25.34 Devices and electronic products. The classes... substitutes. (c) Issuance, amendment, or repeal of a standard for a class II medical device or an electronic...

Student pharmacists' use and perceived impact of educational technologies.

PubMed

Stolte, Scott K; Richard, Craig; Rahman, Ateequr; Kidd, Robert S

2011-06-10

To assess the frequency of use by and perceived impact of various educational technologies on student pharmacists. Data were obtained using a validated, Web-based survey instrument designed to evaluate the frequency of use and impact on learning of various technologies used in educating first-, second-, and third-year student pharmacists. Basic demographic data also were collected and analyzed. The majority (89.4%) of the 179 respondents were comfortable with the technology used in the academic program. The most frequently used technologies for educational purposes were in class electronic presentations, course materials posted on the school Web site, and e-mail. The technologies cited as having the most beneficial impact on learning were course materials posted on the Web site and in-class electronic presentations, and those cited as most detrimental were video-teleconferencing and online testing. Compared to the course textbook, students reported more frequent use of technologies such as electronic course materials, presentations, digital lecture recordings, e-mail, and hand-held devices. Because students' opinions of educational technologies varied, colleges and schools should incorporate educational technologies that students frequently use and that positively impact learning.

Student use and perceptions of mobile technology in clinical clerkships - Guidance for curriculum design.

PubMed

Law, Joanna K; Thome, Parker A; Lindeman, Brenessa; Jackson, Daren C; Lidor, Anne O

2018-01-01

We examined the types of technology used by medical students in clinical clerkships, and the perception of technology implementation into the curriculum. An online survey about technology use was completed prior to general surgery clinical clerkship. Types of devices and frequency/comfort of use were recorded. Perceptions of the benefits and barriers to technology use in clerkship learning were elicited. 125/131 (95.4%) students responded. Most students owned a smart phone (95.2%), tablet (52.8%), or both (50%); 61.6% spent > 11 h/week learning on a device at the Johns Hopkins School of Medicine for educational purposes. Technology use was seen as beneficial by 97.6% of students. Classes that used technology extensively were preferred by 54% of students, although 47.2% perceived decreased faculty/classmate interaction. Students use mobile technology to improve how they learn new material, and prefer taking classes that incorporate information technology. However, in-person/blended curricula are preferable to completely online courses. Copyright © 2017 Elsevier Inc. All rights reserved.

Research and Technology Activities Supporting Closed-Brayton-Cycle Power Conversion System Development

NASA Technical Reports Server (NTRS)

Barrett, Michael J.

2004-01-01

The elements of Brayton technology development emphasize power conversion system risk mitigation. Risk mitigation is achieved by demonstrating system integration feasibility, subsystem/component life capability (particularly in the context of material creep) and overall spacecraft mass reduction. Closed-Brayton-cycle (CBC) power conversion technology is viewed as relatively mature. At the 2-kWe power level, a CBC conversion system Technology Readiness Level (TRL) of six (6) was achieved during the Solar Dynamic Ground Test Demonstration (SD-GTD) in 1998. A TRL 5 was demonstrated for 10 kWe-class CBC components during the development of the Brayton Rotating Unit (BRU) from 1968 to 1976. Components currently in terrestrial (open cycle) Brayton machines represent TRL 4 for similar uses in 100 kWe-class CBC space systems. Because of the baseline component and subsystem technology maturity, much of the Brayton technology task is focused on issues related to systems integration. A brief description of ongoing technology activities is given.

Skyping Class: Using Videoconferencing in Organizational Communication Classes

ERIC Educational Resources Information Center

Garner, Johny T.; Buckner, Marjorie M.

2013-01-01

Organizations use this technology to connect employees and stakeholders because of reduced cost and greater participation among global stakeholders (Hertel, Geister, & Konradt, 2005). Scholars have examined videoconferencing in groups (Zornoza, Prieto, Marti, & Piero, 1993),…

Automated sorting of polymer flakes: fluorescence labeling and development of a measurement system prototype.

PubMed

Brunner, S; Fomin, P; Kargel, Ch

2015-04-01

The extensive demand and use of plastics in modern life is associated with a significant economical impact and a serious ecological footprint. The production of plastics involves a high energy consumption and CO2 emission as well as the large need for (limited) fossil resources. Due to the high durability of plastics, large amounts of plastic garbage is mounting in overflowing landfills (plus 9.6 million tons in Europe in the year 2012) and plastic debris is floating in the world oceans or waste-to-energy combustion releases even more CO2 plus toxic substances (dioxins, heavy metals) to the atmosphere. The recycling of plastic products after their life cycle can obviously contribute a great deal to the reduction of the environmental and economical impacts. In order to produce high-quality recycling products, mono-fractional compositions of waste polymers are required. However, existing measurement technologies such as near infrared spectroscopy show limitations in the sorting of complex mixtures and different grades of polymers, especially when black plastics are involved. More recently invented technologies based on mid-infrared, Raman spectroscopy or laser-aided spectroscopy are still under development and expected to be rather expensive. A promising approach to put high sorting purities into practice is to label plastic resins with unique combinations of fluorescence markers (tracers). These are incorporated into virgin resins during the manufacturing process at the ppm (or sub ppm) concentration level, just large enough that the fluorescence emissions can be detected with sensitive instrumentation but neither affect the visual appearance nor the mechanical properties of the polymers. In this paper we present the prototype of a measurement and classification system that identifies polymer flakes (mill material of a few millimeters size) located on a conveyor belt in real time based on the emitted fluorescence of incorporated markers. Classification performance and throughput were experimentally quantified using 3 different types of polymers (Polyoxymethylene (POM), Polybutylenterephthalat (PBT) and Acrylonitrile Styrene Acrylate (ASA)) in colored and uncolored form. Overall, 12 classes of plastic flakes were investigated in this study, where 11 classes were labeled with unique binary combinations of 4 fluorescence markers and class 12 includes unlabeled plastic flakes of various colors. From approx. 68,000 investigated flakes it was found that the developed measurement prototype system achieves an average sensitivity (true positive rate) of 99.4% and a precision (positive predictive value) of 99.5%, while being able to handle up to approx. 1800 flakes per second. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cultivating engineering innovation ability based on optoelectronic experimental platform

NASA Astrophysics Data System (ADS)

Li, Dangjuan; Wu, Shenjiang

2017-08-01

As the supporting experimental platform of the Xi'an Technological University education reform experimental class, "optical technological innovation experimental platform" integrated the design and comprehensive experiments of the optical multi-class courses. On the basis of summing up the past two years teaching experience, platform pilot projects were improve. It has played a good role by making the use of an open teaching model in the cultivating engineering innovation spirit and scientific thinking of the students.

LMS in university for in-class education: Synergy of free software, competitive approach and social networks technology

NASA Astrophysics Data System (ADS)

Radygin, V. Y.; Lukyanova, N. V.; Kupriyanov, D. Yu.

2017-01-01

Transformation of learning management systems over last two decades was investigated. The features of using e-learning systems for in-class education were discussed. The necessity of integration e-learning system with the student performance controlling system was shown. The influence of choice of student ranking system on students' motivation was described. The own way to choice of e-learning system design principles and technologies were suggested.

Ames Infusion Stories for NASA Annual Technology Report: Nano Entry System for CubeSat-Class Payloads

NASA Technical Reports Server (NTRS)

Smith, Brandon; Jan, Darrell Leslie; Venkatapathy, Etiraj

2015-01-01

The Nano Entry System for CubeSat-Class Payloads led to the development of the Nano-Adaptable Deployable Entry and Placement Technology ("Nano-ADEPT"). Nano-ADEPT is a mechanically deployed entry, descent, and landing (EDL) system that stows during launch and cruise (like an umbrella) and serves as both heat shield and primary structure during EDL. It is especially designed for small spacecraft where volume is a limiting constraint.

Ford Class Aircraft Carrier: Poor Outcomes Are the Predictable Consequences of the Prevalent Acquisition Culture

DTIC Science & Technology

2015-10-01

FORD CLASS AIRCRAFT CARRIER Poor Outcomes Are the Predictable Consequences of the Prevalent Acquisition Culture...2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Ford Class Aircraft Carrier: Poor Outcomes Are the Predictable...This Study The Navy set ambitious goals for the Ford -class program, including an array of new technologies and design features that were intended

Technology Education in Taiwan: A Transition from Industrial Arts to Living Technology.

ERIC Educational Resources Information Center

Lee, Lung-Sheng Steven

Secondary-level technology education in Taiwan is shifting its emphasis from industrial arts to living technology in an effort to overcome the following problems: industrial arts is seen as a subordinate subject; the public's perceptions are not aligned with the field; and industrial technology teachers have had to struggle with huge class sizes…

Use of Technology in College and University English Classrooms

ERIC Educational Resources Information Center

Black, Bethany; Lassmann, Marie E.

2016-01-01

Many forms of technology are available to college and university instructors. Technology has become an important part of today's world and an important part of instruction in various classrooms. Many may see technology as reasonable to use in a science, mathematics, or art class. In this paper, different types of technology used in college and…

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

Integration of Digital Technology and Innovative Strategies for Learning and Teaching Large Classes: A Calculus Case Study

ERIC Educational Resources Information Center

Vajravelu, Kuppalapalle; Muhs, Tammy

2016-01-01

Successful science and engineering programs require proficiency and dynamics in mathematics classes to enhance the learning of complex subject matter with a sufficient amount of practical problem solving. Improving student performance and retention in mathematics classes requires inventive approaches. At the University of Central Florida (UCF) the…

Statistical Analysis of the Association Between Subject Headings and Their Corresponding Class Notations in Science and Technology Monographs.

ERIC Educational Resources Information Center

Khosh-khui, Abolghasem

This study investigates the degree of relationship between scientific and technical subject headings and their corresponding class notations in the Dewey Decimal (DDC) and Library of Congress Classification (LCC) systems. The degree of association between a subject heading and its corresponding class of notation or notations is measured by…

E-Mail from Professor Enhances Student Motivation and Attitudes

ERIC Educational Resources Information Center

Legg, Angela M.; Wilson, Janie H.

2009-01-01

Traditionally, professors use the first day of class to build rapport. However, current technology allows professors to contact students prior to the first day of class. This study assessed how the receipt of a welcoming e-mail from a female professor 1 week before the first day of class affected student motivation and attitudes toward the…

76 FR 7852 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the HHS decision to designate a class of employees from BWX Technologies, Inc...

Actualizing the Environment: A Study of First-Year Composition Student MOO Activity.

ERIC Educational Resources Information Center

English, Joel A.

This paper describes the use of technology in a first year college writing class. The class utilizes a multi-user object-oriented domain (MOO) which allows participants to talk, perform actions, thoughts, and emotions, manipulate objects and furniture, and altogether control the online environment. The class holds discussions on the computer in…

MUTAGENICITY IN SALMONELLA OF HALONITROMETHANES: A RECENTLY RECOGNIZED CLASS OF DISINFECTION BY-PRODUCTS IN DRINKING WATER

EPA Science Inventory

Halonitromethanes (HNMs) are a recently identified class of disinfection by-products in drinking water. They include chloronitromethane (CHN), dichloronitromethane (DCNM), trichloronitromethane (TCNM), bromonitromethane (BNM), dibromonitromethane (DBNM), tribromonitromethane (TBN...

CMSAF products Cloud Fraction Coverage and Cloud Type used for solar global irradiance estimation

NASA Astrophysics Data System (ADS)

Badescu, Viorel; Dumitrescu, Alexandru

2016-08-01

Two products provided by the climate monitoring satellite application facility (CMSAF) are the instantaneous Cloud Fractional Coverage (iCFC) and the instantaneous Cloud Type (iCTY) products. Previous studies based on the iCFC product show that the simple solar radiation models belonging to the cloudiness index class n CFC = 0.1-1.0 have rRMSE values ranging between 68 and 71 %. The products iCFC and iCTY are used here to develop simple models providing hourly estimates for solar global irradiance. Measurements performed at five weather stations of Romania (South-Eastern Europe) are used. Two three-class characterizations of the state-of-the-sky, based on the iCTY product, are defined. In case of the first new sky state classification, which is roughly related with cloud altitude, the solar radiation models proposed here perform worst for the iCTY class 4-15, with rRMSE values ranging between 46 and 57 %. The spreading error of the simple models is lower than that of the MAGIC model for the iCTY classes 1-4 and 15-19, but larger for iCTY classes 4-15. In case of the second new sky state classification, which takes into account in a weighted manner the chance for the sun to be covered by different types of clouds, the solar radiation models proposed here perform worst for the cloudiness index class n CTY = 0.7-0.1, with rRMSE values ranging between 51 and 66 %. Therefore, the two new sky state classifications based on the iCTY product are useful in increasing the accuracy of solar radiation models.

The research of .NET framework based on delegate of the LCE

NASA Astrophysics Data System (ADS)

Chen, Yi-peng

2011-10-01

Programmers realize LCE Enterprise services provided by NET framework when they develop applied VC# programming design language with component technology facing objects Lots of basic codes used to be compiled in the traditional programming design. However, nowadays this can be done just by adding corresponding character at class, interface, method, assembly with simple declarative program. This paper mainly expatiates the mechanism to realize LCE event services with delegate mode in C#. It also introduces the procedure of applying event class, event publisher, subscriber and client in LCE technology. It analyses the technology points of LCE based on delegate mode with popular language and practicing cases.

Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

1995-01-01

Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology to be quantitatively compared in several categories, and a QFD matrix which allows process/chemical pairs to be rated against one another for importance (using consistent categories). Depending on the need for application, one can choose the part(s) needed or have the methodology completed in its entirety. For example, if a program needs to show the risk of changing a process/chemical one may choose to use part of Matrix A and Matrix C. If a chemical is being used, and the process must be changed; one might use the Process Concerns part of Matrix D for the existing process and all possible replacement processes. If an overall analysis of a program is needed, one may request the QFD to be completed.

Cognitive Capitalism: Economic Freedom Moderates the Effects of Intellectual and Average Classes on Economic Productivity.

PubMed

Coyle, Thomas R; Rindermann, Heiner; Hancock, Dale

2016-10-01

Cognitive ability stimulates economic productivity. However, the effects of cognitive ability may be stronger in free and open economies, where competition rewards merit and achievement. To test this hypothesis, ability levels of intellectual classes (top 5%) and average classes (country averages) were estimated using international student assessments (Programme for International Student Assessment; Trends in International Mathematics and Science Study; and Progress in International Reading Literacy Study) (N = 99 countries). The ability levels were correlated with indicators of economic freedom (Fraser Institute), scientific achievement (patent rates), innovation (Global Innovation Index), competitiveness (Global Competitiveness Index), and wealth (gross domestic product). Ability levels of intellectual and average classes strongly predicted all economic criteria. In addition, economic freedom moderated the effects of cognitive ability (for both classes), with stronger effects at higher levels of freedom. Effects were particularly robust for scientific achievements when the full range of freedom was analyzed. The results support cognitive capitalism theory: cognitive ability stimulates economic productivity, and its effects are enhanced by economic freedom. © The Author(s) 2016.

Robotic and automatic welding development at the Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Jones, C. S.; Jackson, M. E.; Flanigan, L. A.

1988-01-01

Welding automation is the key to two major development programs to improve quality and reduce the cost of manufacturing space hardware currently undertaken by the Materials and Processes Laboratory of the NASA Marshall Space Flight Center. Variable polarity plasma arc welding has demonstrated its effectiveness on class 1 aluminum welding in external tank production. More than three miles of welds were completed without an internal defect. Much of this success can be credited to automation developments which stabilize the process. Robotic manipulation technology is under development for automation of welds on the Space Shuttle's main engines utilizing pathfinder systems in development of tooling and sensors for the production applications. The overall approach to welding automation development undertaken is outlined. Advanced sensors and control systems methodologies are described that combine to make aerospace quality welds with a minimum of dependence on operator skill.

Challenges to communicate risks of human-caused earthquakes

NASA Astrophysics Data System (ADS)

Klose, C. D.

2014-12-01

The awareness of natural hazards has been up-trending in recent years. In particular, this is true for earthquakes, which increase in frequency and magnitude in regions that normally do not experience seismic activity. In fact, one of the major concerns for many communities and businesses is that humans today seem to cause earthquakes due to large-scale shale gas production, dewatering and flooding of mines and deep geothermal power production. Accordingly, without opposing any of these technologies it should be a priority of earth scientists who are researching natural hazards to communicate earthquake risks. This presentation discusses the challenges that earth scientists are facing to properly communicate earthquake risks, in light of the fact that human-caused earthquakes are an environmental change affecting only some communities and businesses. Communication channels may range from research papers, books and class room lectures to outreach events and programs, popular media events or even social media networks.

21 CFR 1303.13 - Adjustments of aggregate production quotas.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Changes in the demand for that class, changes in the national rate of net disposal of the class, and... for that class; (2) Whether any increased demand for that class, the national and/or individual rates... demand for that class can be met through existing inventories, increased individual manufacturing quotas...

Numerical Simulations for Enhanced Methane Recovery from Gas Hydrate Accumulations by Utilizing CO2 Sequestration

NASA Astrophysics Data System (ADS)

Sridhara, Prathyusha

In 2013, the International Energy Outlook (EIA, 2013) projected that global energy demand will grow by 56% between 2010 and 2040. Despite strong growth in renewable energy supplies, much of this growth is expected to be met by fossil fuels. Concerns ranging from greenhouse gas emissions and energy security are spawning new interests for other sources of energy including renewable and unconventional fossil fuel such as shale gas and oil as well as gas hydrates. The production methods as well as long-term reservoir behavior of gas hydrate deposits have been under extensive investigation. Reservoir simulators can be used to predict the production potentials of hydrate formations and to determine which technique results in enhanced gas recovery. In this work, a new simulation tool, Mix3HydrateResSim (Mix3HRS), which accounts for complex thermodynamics of multi-component hydrate phase comprised of varying hydrate solid crystal structure, is used to perform the CO2-assisted production technique simulations from CH4 hydrate accumulations. The simulator is one among very few reservoir simulators which can simulate the process of CH4 substitution by CO2 (and N2 ) in the hydrate lattice. Natural gas hydrate deposits around the globe are categorized into three different classes based on the characteristics of the geological sediments present in contact with the hydrate bearing deposits. Amongst these, the Class 2 hydrate accumulations predominantly confirmed in the permafrost and along seashore, are characterized by a mobile aqueous phase underneath a hydrate bearing sediment. The exploitation of such gas hydrate deposits results in release of large amounts of water due to the presence of permeable water-saturated sediments encompassing the hydrate deposits, thus lowering the produced gas rates. In this study, a suite of numerical simulation scenarios with varied complexity are considered which aimed at understanding the underlying changes in physical, thermodynamic and transport properties with change in pressure and temperature due to the presence of the simple CO2-hydrate and mixed hydrates (mainly CH4-CO2 hydrate and CH4 -CO2-N2 hydrate) in the porous geologic media. These simulations on CO2/ CH4-CO2 hydrate reservoirs provided a basic insight to formulate and interpret a novel technological approach. This approach aims at prediction of enhanced gas production profiles from Class 2 hydrate accumulations by utilizing CO2 sequestration. The approach also offers a possibility to permanently store CO 2 in the geologic formation to a greater extent compared to a direct injection of CO2 into gas hydrate sediments. The production technique implies a three-stage approach using one vertical well design. In Stage I, the CO2 is injected into the underlying aquifer. In Stage II, the well is shut in and injected CO2 is allowed to be converted into immobile CO2 hydrate. Finally, during Stage III, decomposition of CH4 hydrate is induced by the depressurization method. The gas production potential is estimated over 15 years. The results reveal that methane production is increased together with simultaneous reduction of concomitant water production rate comparing to a conventional Class 2 reservoir production.

Effect of Different Treatment Technologies on the Fate of Antibiotic Resistance Genes and Class 1 Integrons when Residual Municipal Wastewater Solids are Applied to Soil.

PubMed

Burch, Tucker R; Sadowsky, Michael J; LaPara, Timothy M

2017-12-19

Residual wastewater solids are a significant reservoir of antibiotic resistance genes (ARGs). While treatment technologies can reduce ARG levels in residual wastewater solids, the effects of these technologies on ARGs in soil during subsequent land-application are unknown. In this study we investigated the use of numerous treatment technologies (air drying, aerobic digestion, mesophilic anaerobic digestion, thermophilic anaerobic digestion, pasteurization, and alkaline stabilization) on the fate of ARGs and class 1 integrons in wastewater solids-amended soil microcosms. Six ARGs [erm(B), qnrA, sul1, tet(A), tet(W), and tet(X)], the integrase gene of class 1 integrons (intI1), and 16S rRNA genes were quantified using quantitative polymerase chain reaction. The quantities of ARGs and intI1 decreased in all microcosms, but thermophilic anaerobic digestion, alkaline stabilization, and pasteurization led to the most extensive decay of ARGs and intI1, often to levels similar to that of the control microcosms to which no wastewater solids had been applied. In contrast, the rates by which ARGs and intI1 declined using the other treatment technologies were generally similar, typically varying by less than 2 fold. These results demonstrate that wastewater solids treatment technologies can be used to decrease the persistence of ARGs and intI1 during their subsequent application to soil.

Capitalists, managers, professionals and mortality: findings from the Barcelona social class and all cause mortality longitudinal study.

PubMed

Muntaner, Carles; Borrell, Carme; Solà, Judit; Marì-Dell'olmo, Marc; Chung, Haejoo; Rodríguez-Sanz, Maica; Benach, Joan; Noh, Samuel

2009-11-01

To examine the effects of Neo-Marxian social class (i.e. measured as relations of control over productive assets) and potential mediators such as labour-market position, work organization, material deprivation and health behaviours upon mortality in Barcelona, Spain. Longitudinal data from the Barcelona 2000 Health Interview Survey (n = 7526) with follow-up interviews through the municipal census in 2008 (95.97% response rate) were used. Using data on relations of property, organizational power, and education, social classes were grouped according to Wright's scheme: capitalists, petit bourgeoisie, managers, supervisors, and skilled, semi-skilled and unskilled workers. Social class, measured as relations of control over productive assets, is an important predictor of mortality among working-class positions for men but not for women. Workers (hazard ratio 1.60, 95% confidence interval 1.10-2.35), managers and small employers had a higher risk of death than capitalists. The extensive use of conventional gradient measures of social stratification has neglected sociological measurements of social class conceptualized as relations of control over productive assets. This concept is capable of explaining how social inequalities are generated. To confirm the protective effect of the capitalist class position and the ''contradictory class location hypothesis'', additional efforts are needed to properly measure class among low-level supervisors, capitalists, managers, and small employers.

Risk society and the distribution of bads: theorizing class in the risk society.

PubMed

Curran, Dean

2013-03-01

Ulrich Beck states in the Risk Society (1992) that the rise of the social production of risks in the risk society signals that class ceases to be of relevance; instead the hierarchical logic of class will be supplanted by the egalitarian logic of the distribution of risks. Several trenchant critiques of Beck's claim have justified the continued relevance of class to contemporary society. While these accounts have emphasized continuity, they have not attempted to chart, as this paper will, how the growing social production of risk increases the importance of class. This paper argues that it is Beck's undifferentiated, catastrophic account of risk that undergirds his rejection of class, and that by inserting an account of risk involving gradations in both damages and calculability into Beck's framework, his theory of risk society may be used to develop a critical theory of class. Such a theory can be used to reveal how wealth differentials associated with class relations actually increase in importance to individuals' life-chances in the risk society. With the growing production and distribution of bads, class inequalities gain added significance, since it will be relative wealth differentials that both enables the advantaged to minimize their risk exposure and imposes on others the necessity of facing the intensified risks of the risk society. © London School of Economics and Political Science 2013.

Computer-aided decision making.

Treesearch

Keith M. Reynolds; Daniel L. Schmoldt

2006-01-01

Several major classes of software technologies have been used in decisionmaking for forest management applications over the past few decades. These computer-based technologies include mathematical programming, expert systems, network models, multi-criteria decisionmaking, and integrated systems. Each technology possesses unique advantages and disadvantages, and has...

75 FR 36694 - Importer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... 14187), Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis, Missouri 63144, made application... registration of Meridian Medical Technologies to import the basic classes of controlled substances is... Technologies to ensure that the company's registration is consistent with the public interest. The...

Analytically reduced form for the class of integrals containing multicenter products of 1s hydrogenic orbitals, Coulomb or Yukawa potentials, and plane waves

NASA Technical Reports Server (NTRS)

Straton, Jack C.

1989-01-01

The class of integrals containing the product of N 1s hydrogenic orbitals and M Coulomb or Yukawa potentials with m plane waves is investigated analytically. The results obtained by Straton (1989) are extended and generalized. It is shown that the dimensionality of the entire class can be reduced from 3m to M+N-1.

Applied Physics Modules Selected for Automotive and Diesel Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of ten learning modules is equivalent to the content of a five-credit hour class in automotive technology or diesel technology. Almost all the modules contain technological application in the form of laboratory experiments or…

Using Technology-Nested Instructional Strategies to Enhance Student Learning

ERIC Educational Resources Information Center

Lumpkin, Angela; Achen, Rebecca M.; Dodd, Regan K.

2015-01-01

Students today expect the use of technology in their classes, rather than have to listen to less-than-engaging lectures. College students are connected electronically and incessant technology consumers. As a result, they may prefer the infusion of technologies to help them learn and enjoy the process of learning, rather than having to listen…

Determining Science Teachers' Levels of Motivation and Self-Regulation Regarding Use of Education Technologies

ERIC Educational Resources Information Center

Efe, Hülya Aslan; Baysal, Yunus Emre

2017-01-01

In line with the growing importance of use of education technologies in the field of education, teachers are increasingly expected to use education technologies in class environment and to provide students with appropriate environments and opportunities to use these technologies. This situation makes it necessary to investigate teachers'…

Building Their Future: Girls in Technology Education in Connecticut.

ERIC Educational Resources Information Center

Silverman, Suzanne; Pritchard, Alice M.

A study of the experiences of girls in technology education courses in three Connecticut middle schools examined the impact of these experiences on the students' decisions about whether to take more technology classes in high school. Another focus was girls' attitudes toward careers in technological fields. Five basic types of data were gathered:…

Drug, devices, technologies, and techniques for blood management in minimally invasive and conventional cardiothoracic surgery: a consensus statement from the International Society for Minimally Invasive Cardiothoracic Surgery (ISMICS) 2011.

PubMed

Menkis, Alan H; Martin, Janet; Cheng, Davy C H; Fitzgerald, David C; Freedman, John J; Gao, Changqing; Koster, Andreas; Mackenzie, G Scott; Murphy, Gavin J; Spiess, Bruce; Ad, Niv

2012-01-01

The objectives of this consensus conference were to evaluate the evidence for the efficacy and safety of perioperative drugs, technologies, and techniques in reducing allogeneic blood transfusion for adults undergoing cardiac surgery and to develop evidence-based recommendations for comprehensive perioperative blood management in cardiac surgery, with emphasis on minimally invasive cardiac surgery. The consensus panel short-listed the potential topics for review from a comprehensive list of potential drugs, devices, technologies, and techniques. The process of short-listing was based on the need to prioritize and focus on the areas of highest importance to surgeons, anesthesiologists, perfusionists, hematologists, and allied health care involved in the management of patients who undergo cardiac surgery whether through the conventional or minimally invasive approach. MEDLINE, Cochrane Library, and Embase databases were searched from their date of inception to May 2011, and supplemental hand searches were also performed. Detailed methodology and search strategies are outlined in each of the subsequently published systematic reviews. In general, all relevant synonyms for drugs (antifibrinolytic, aprotinin, [Latin Small Letter Open E]-aminocaproic acid, tranexamic acid [TA], desmopressin, anticoagulants, heparin, antiplatelets, anti-Xa agents, adenosine diphosphate inhibitors, acetylsalicylic acid [ASA], factor VIIa [FVIIa]), technologies (cell salvage, miniaturized cardiopulmonary bypass (CPB) circuits, biocompatible circuits, ultrafiltration), and techniques (transfusion thresholds, minimally invasive cardiac or aortic surgery) were searched and combined with terms for blood, red blood cells, fresh-frozen plasma, platelets, transfusion, and allogeneic exposure. The American Heart Association/American College of Cardiology system was used to label the level of evidence and class of each recommendation. Database search identified more than 6900 articles, with 4423 full-text randomized controlled trials assessed for eligibility, and the final 125 systematic reviews and meta-analyses were used in the consensus conference. The results of the consensus conference, including the evidence-based statements and the recommendations, are outlined in the text, with references given for the relevant evidence that formed the basis for the statements and recommendations. RECOMMENDATIONS FOR ANTIFIBRINOLYTICS: The lysine analogs ?-aminocaproic acid (Amicar) and tranexamic acid (TA) reduce exposure to allogeneic blood inpatients undergoing on-pump cardiac surgery. These agents are recommended to be used routinely as part of a blood conservation strategy especially in patients at risk of undergoing onpump cardiac surgery (Class I, Level A). It is important not to exceed maximum TA total dosages (50Y100mg/kg) because of potential neurotoxicity in the elderly and open-heart procedures (Class IIb, Level C). Aprotinin is not recommended in adult cardiac surgery until further studies on its safety profile have been performed (Class III, Level A). RECOMMENDATIONS FOR TA IN OFF-PUMP CORONARY ARTERY BYPASS: Tranexamic acid may be recommended as part of a blood conservation strategy in high risk patients undergoing off-pump coronary artery bypass (OPCAB) surgery (Class I, Level A).Tranexamic acid dosing in OPCAB surgery needs further study particularly with regard to possible neurotoxicity such as seizures.In addition, the benefit-risk ratio in OPCAB needs further eludication because of the lower inherent risk for bleeding in this group (Class IIb, Level C). RECOMMENDATIONS FOR DDAVP: DDAVP can be considered for prophylaxis in coronary artery bypass grafting (CABG) surgery, in particular, for patients onASA within 7 days or prolonged CPB more than 140 minutes (Class IIa, Level A). Caution should be used with the DDAVP infusion rate to avoid significant systemic hypotension (Class I, Level A). RECOMMENDATIONS FOR TOPICAL HEMOSTATICS: The routine use of topical antifibrinolytics in cardiac surgery isnot recommended (Class IIa, Level A). Topical fibrin sealants may be considered in clinical situations where conventional approaches of surgical and medical improvement of hemostasis are not effective, that is, with bleeding problems more local than generalized, bearing in mind the blackbox warning of bovine thrombin by the US Food and Drug Administration (Class IIb, Level C).Recommendations for FVIIa:Prophylactic use of FVIIa cannot be recommended because of a significant increase in the risk of thromboembolic events and stroke (Class IIa, Level A).Factor VIIa may be considered in clinical situations where conventional approaches of surgical and pharmacologic hemostasis have failed and uncontrollable hemorrhage poses a high risk of severe and life-threatening outcomes (Class IIb, Level B). RECOMMENDATIONS FOR ERYTHROPOIETIN PLUS IRON: It is reasonable to administer erythropoietin preoperatively to increase red blood cell mass in patients who are anemic or refuse blood products (such as for Jehovah’s Witness faith) or who are likely to have postoperative anemia (Class IIa, Level A). RECOMMENDATIONS FOR ANTIPLATELETS BEFORE CARDIAC SURGERY: Acetylsalicylic acid may be continued until surgery (Class IIa,Level B) For stable elective CABG procedures with no drug-elutingstent, stop clopidogrel 5 days before surgery (Class I, Level A).h For stable elective CABG procedures with drug-eluting stents less than 1 year old, consider continuing clopidogrel or heparin as abridge to surgery (Class IIb, Level C).h Direct-acting P2Y12 receptor antagonists may be a better alternative than clopidogrel in acute coronary syndrome patients undergoing CABG surgery (Class IIa, Level B). RECOMMENDATIONS FOR ANTIPLATELETS AFTER CARDIAC SURGERY: In stable CABG surgery (nonYacute coronary syndrome patients), the routine use of postoperative clopidogrel with ASAis not warranted (Class IIb, Level B). RECOMMENDATIONS FOR ACUTE NORMOVOLEMIC HEMODILUTION: Acute normovolemic hemodilution can be considered in selected patients with adequate preoperative hemoglobin to reduce post-CPB bleeding (Class IIa, Level A).The routine use of acute normovolemic hemodilution is not recommended (Class IIb, Level B). RECOMMENDATIONS FOR RETROGRADE AUTOLOGOUS PRIMING: Retrograde autologous priming is recommended as a blood conservation modality to reduce allogeneic blood transfusion for onpump cardiac surgery (Class I, Level A). RECOMMENDATIONS FOR CELL SALVAGE: Routine use of cell salvage is recommended in operations where an increased blood loss is expected (Class 1, Level A). Cell salvage should be used throughout the entire operation and not merely as a replacement for CPB cardiotomy suction (Class IIa, Level A). BIOCOMPATIBLE CPB CIRCUITS: The routine use of biocompatible coated CPB circuitry may be considered as part of a multimodal blood conservation program. However, the heterogeneity of surface-modified products, anticoagulation management, and CPB technique does not significantly impact surgical blood loss and transfusion needs (Class IIb,Level A). RECOMMENDATIONS FOR MINIATURIZED EXTRACORPOREAL CARDIOPULMONARY CIRCUIT VERSUS CONVENTIONAL EXTRACORPOREAL CARDIOPULMONARY CIRCUIT: Miniaturized extracorporeal cardiopulmonary circuit can be considered as a blood conservation technique to reduce allogeneic blood exposure (Class IIa, Level A); however, issues related to heparinization management and biocompatible coatings remain to be clarified. RECOMMENDATIONS FOR ULTRAFILTRATION (CONTINUOUS OR MODIFIED):h Ultrafiltration may be considered for blood conservation (Class IIb, Level A); however, the impact on clinically relevant outcomes remains unknown. RECOMMENDATIONS FOR PLATELET PLASMAPHERESIS:It is reasonable to recommend platelet plasmapheresis for blood management in cardiac surgery (Class IIa, Level A), although the impact on clinically relevant outcomes remains unknown. RECOMMENDATIONS FOR POINT-OF-CARE MONITORING:The evidence is too premature to recommend point-of-caretechnology for routine use because its use has not been shown to impact clinical outcome (Class IIb, Level A). RECOMMENDATIONS FOR SURGICAL TECHNIQUES FOR OPCAB, MINIMALLY INVASIVE STERNOTOMY FOR AORTIC VALVE SURGERY, MINIMALLY INVASIVE STERNOTOMY FOR MITRAL VALVE SURGERY, AND TRANSCATHETHER AORTIC VALVE IMPLANTATION: Although these minimally invasive procedures are not primarily selected for the purpose of blood management, the reduced allogeneic blood exposure should be considered in the balance of benefits and risks when selecting the appropriate surgery for patients.

Closing the feedback loop: engaging students in large first-year mathematics test revision sessions using pen-enabled screens

NASA Astrophysics Data System (ADS)

Donovan, Diane; Loch, Birgit

2013-01-01

How can active learning, peer learning and prompt feedback be achieved in large first-year mathematics classes? Further, what technologies may support these aims? In this article, we assert that test revision sessions in first-year mathematics held in a technology-enhanced lecture theatre can be highly interactive with students solving problems, learning from each other and receiving immediate feedback. This is facilitated by pen-enabled screens and synchronization software. We argue that the educational benefits achievable through the technology do outweigh the technological distractions, and that these benefits can be achieved by focused, targeted one-off sessions and not only by a semester-long, regular approach. Repeat mid-semester test revision sessions were offered on a non-compulsory basis using pen-enabled screens for all students. Students worked practice test questions and marked solutions to mathematical problems on the screens. Students' work was then displayed anonymously for their peers to see. Answers were discussed with the whole class. We discuss outcomes from two offerings of these sessions using student feedback and lecturer reflections and show the impact of participation on self-reported student confidence. Pedagogical approaches that the technology allowed for the first time in a large class are highlighted. Students responded uniformly positively.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy's Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the student must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of themore » Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.« less

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul F.; Beck, Robin A. S.; Hamm, Kenneth R.; Yount, Bryan C.; Makino, A.; Smith, B.; Gage, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term; (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term; and (3) Heavy mass and human missions to Mars in the long term.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Wercinski, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (approximately 40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low-mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term and (3) Heavy mass and human missions to Mars in the long term.

The Effect of Clickers in University Science Courses

NASA Astrophysics Data System (ADS)

Sutherlin, Autumn L.; Sutherlin, Gordon R.; Akpanudo, Usenime M.

2013-10-01

In four studies on the use of student response systems, clickers, we sought to understand whether the use of clickers would impact students' attitudes toward the use of technology for instruction and achievement on examinations. While the results varied some by study, overall, the results revealed no significant changes in the already positive student attitude toward the use of instructional technology. In all four studies, the majority of the students reported that they learned more when clickers were used in class. The use of clickers did not serve as useful predictor of student achievement in science classes. The findings of this study are similar to others which suggest that some classroom technologies (like clickers) may not necessarily have a direct connection with student achievement, despite positive student feedback regarding their experience using these technologies. Further studies are needed to better understand the true nature of the relationship between these technologies and classroom outcomes.

Applying the Extended Technology Acceptance Model to the Use of Clickers in Student Learning: Some Evidence from Macroeconomics Classes

ERIC Educational Resources Information Center

Wu, Xiaoyu; Gao, Yuan

2011-01-01

This paper applies the extended technology acceptance model (exTAM) in information systems research to the use of clickers in student learning. The technology acceptance model (TAM) posits that perceived ease of use and perceived usefulness of technology influence users' attitudes toward using and intention to use technology. Research subsequent…

Empowered Youth: The Co-Creation of Youth as Technological Citizens and Consumers within Community-Based Technology Programs

ERIC Educational Resources Information Center

Pabst, Johanna K.

2014-01-01

The purpose of this study is to investigate the new media ecologies of urban, low-income youth and youth of color, and how they develop literacies and competencies around technology in the particular spaces of Community Technology Centers (CTCs), while placing them within their broader technological experiences and raced, classed, and gendered…

EMERGING CLASS A PROCESSES - A DISCUSSION OF NOVEL APPROACHES TO MEETING CLASS A, ALTERNATIVES 1, 3 AND 4; AND EMERGING TECHNOLOGIES APPLYING FOR A PFRP EQUIVALENCY UNDER CLASS A, ALTERNATIVE 6.

EPA Science Inventory

Pathogenic microorganisms enter the wastewater collection system from many sources including hospitals, slaughter houses and schools. During treatment at the wastewater treatment plant they become concentrated in the sewage sludge. Prior to any kind of beneficial use the sludge m...

The Conundrum of Social Class: Disparities in Publishing among STEM Students in Undergraduate Research Programs at a Hispanic Majority Institution

ERIC Educational Resources Information Center

Grineski, Sara; Daniels, Heather; Collins, Timothy; Morales, Danielle X.; Frederick, Angela; Garcia, Marilyn

2018-01-01

Research on the science, technology, engineering, and math (STEM) student development pipeline has largely ignored social class and instead examined inequalities based on gender and race. We investigate the role of social class in undergraduate student research publications. Data come from a sample of 213 undergraduate research participants…

Use of a Technology-Enhanced Version of the Good Behavior Game in an Elementary School Setting

ERIC Educational Resources Information Center

Lynne, Shauna; Radley, Keith C.; Dart, Evan H.; Tingstrom, Daniel H.; Barry, Christopher T.; Lum, John D. K.

2017-01-01

The purpose of this study was to investigate the effectiveness of a variation of the Good Behavior Game (GBG) in which teachers used ClassDojo to manage each team's progress. ClassDojo is a computer-based program that enables teachers to award students with points for demonstrating target behaviors. Dependent variables included class-wide…

Learning Designs Using Flipped Classroom Instruction (Conception d'apprentissage à l'aide de l'instruction en classe inversée)

ERIC Educational Resources Information Center

Mazur, Amber D.; Brown, Barbara; Jacobsen, Michele

2015-01-01

The flipped classroom is an instructional model that leverages technology-enhanced instruction outside of class time in order to maximize student engagement and learning during class time. As part of an action research study, the authors synthesize reflections about how the flipped classroom model can support teaching, learning and assessment…

What Are Students Doing during Lecture? Evidence from New Technologies to Capture Student Activity

ERIC Educational Resources Information Center

Maltese, Adam V.; Danish, Joshua A.; Bouldin, Ryan M.; Harsh, Joseph A.; Bryan, Branden

2016-01-01

Engaging students in class is paramount if they are to gain a deep understanding of class content. Student engagement is manifested by attention to the various components of instruction. However, there is little research at the tertiary level focusing on what aspects of instruction are related to changes in student attention during class. To…

"I'm Glad I Was Designed": Un/Doing Gender and Class in Susan Price's "Odin Trilogy"

ERIC Educational Resources Information Center

Lehtonen, Sanna

2012-01-01

Susan Price's "Odin Trilogy" (2005-2008) is a juvenile science fiction series that depicts a future where class relations have become polarised due to late capitalist and technological developments and where ways of doing gender continue to be strongly connected with class. The society in the novels is based on slavery: people are either…

75 FR 5236 - New Postal Product

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

... Description] Premium Stamped Stationery [Reserved for Product Description] Premium Stamped Cards [Reserved for... determine whether such an agreement (1) Improves the net financial position of the Postal Service or... Descriptions First-Class Mail [Reserved for Class Description] Single-Piece Letters/Postcards [Reserved for...

Course Management Systems: Traveling Beyond Powerpoint Slides Online

NASA Astrophysics Data System (ADS)

Gauthier, A. J.; Impey, C. D.

2004-12-01

Course management systems (CMS) like WebCT, Blackboard, Astronomica, etc., have reached and surpassed their tipping point in higher education. They are no longer a technology-trendy item to use in a course, but rather an expected supplement to undergraduate courses. There is a well known disconnect between the student population of ''digital natives'' (1) and higher education instructors, the ''digital immigrants'' (1). What expectations and technology skills do the new generations of undergraduates have? How can instructors easily meet their students' needs? What needs do instructors have and what resources are available to meet those needs? In the past, instructors would create their own HTML web pages to post class materials like PowerPoint slides, homework, and announcements. How does an instructor-created web resource differ from a secure university run CMS? How can you make your university or college's CMS system into a productive learning tool and not just a repository for class materials and grades? How can the astronomy instructor benefit from integrating a CMS into their course? What are common student attitudes regarding CMS usage in a course? How are instructors using CMSs in innovative ways? Where on your campus can you get free help designing and implementing a CMS resource for your students? This presentation aims to answer these questions. Extensive literature reviews, formal surveys, case study reports, and educational research from the instructional technology community inform our astronomy teaching community of the answers. Highlights from innovative systems and uses of CMSs in undergraduate Astro 101 classrooms will be presented. Resources and further references will be made available as handouts. (1) M. Prensky. ''Digital Natives, Digital Immigrants,'' On The Horizon, Vol.9, 2001.

Research on Historic Bim of Built Heritage in Taiwan - a Case Study of Huangxi Academy

NASA Astrophysics Data System (ADS)

Lu, Y. C.; Shih, T. Y.; Yen, Y. N.

2018-05-01

Digital archiving technology for conserving cultural heritage is an important subject nowadays. The Taiwanese Ministry of Culture continues to try to converge the concept and technology of conservation towards international conventions. However, the products from these different technologies are not yet integrated due to the lack of research and development in this field. There is currently no effective schema in HBIM for Taiwanese cultural heritage. The aim of this research is to establish an HBIM schema for Chinese built heritage in Taiwan. The proposed method starts from the perspective of the components of built heritage buildings, up to the investigation of the important properties of the components through important international charters and Taiwanese laws of cultural heritage conservation. Afterwards, object-oriented class diagram and ontology from the scale of components were defined to clarify the concept and increase the interoperability. A historical database was then established for the historical information of components and to bring it into the concept of BIM in order to build a 3D model of heritage objects which can be used for visualization. An integration platform was developed for the users to browse and manipulate the database and 3D model simultaneously. In addition, this research also evaluated the feasibility of this method using the study case at the Huangxi academy located in Taiwan. The conclusion showed that class diagram could help the establishment of database and even its application for different Chinese built heritage objects. The establishment of ontology helped to convey knowledge and increase interoperability. In comparison to traditional documentation methods, the querying result of the platform was more accurate and less prone to human error.

CYGNSS: Lessons We are Learning from a Class D Mission

NASA Technical Reports Server (NTRS)

Tumlinson, Jessica

2015-01-01

CYGNSS: Lessons Learned from NASA Class D Mission and how they selected their parts for the program to include balance between cost, risk, schedule and technology available as well as balancing cost restraints with mission risk profile.

Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallo, Jean-Baptiste

2014-03-07

Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulicmore » hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the trucking industry. By providing unbiased, third-party assessment of this “hybrid without batteries” technology, this report offers relevant, timely and valuable information to the industry.« less

75 FR 69462 - Importer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-12

... 36680), Rhodes Technologies, 498 Washington Street, Coventry, Rhode Island 02816, made application by... Technologies to import the basic classes of controlled substances is consistent with the public interest, and... 1, 1971. DEA has investigated Rhodes Technologies to ensure that the company's registration is...

76 FR 14690 - Manufacturer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... December 3, 2010, (75 FR 75498), Agilent Technologies, 25200 Commercentre Drive, Lake Forest, California... determined that the registration of Agilent Technologies to manufacture the listed basic classes of... Technologies to ensure that the company's registration is consistent with the public interest. The...

Changing classroom designs: Easy; Changing instructors' pedagogies: Not so easy...

NASA Astrophysics Data System (ADS)

Lasry, Nathaniel; Charles, Elizabeth; Whittaker, Chris; Dedic, Helena; Rosenfield, Steven

2013-01-01

Technology-rich student-centered classrooms such as SCALE-UP and TEAL are designed to actively engage students. We examine what happens when instructors adopt the classroom but not the pedagogy that goes with it. We measure the effect of using socio-technological spaces on students' conceptual change and compare learning gains made in groups using different pedagogies (active learning vs. conventional instruction). We also correlate instructors' self-reported instructional approach (teacher-centered, student-centered) with their classes' normalized FCI gains. We find that technology-rich spaces are only effective when implemented with student-centered active pedagogies. In their absence, the technology-rich classroom is not significantly different from conventional teacher-centered classrooms. We also find that instructors' self-reported perception of student-centeredness accounts for a large fraction of the variance (r2 = 0.83) in their class' average normalized gain. Adopting student-centered pedagogies appears to be a necessary condition for the effective use of technology-rich spaces. However, adopting a new pedagogy seems more difficult than adopting new technology.

Comparing Supply-Side Specifications in Models of Global Agriculture and the Food System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Sherman; van Meijl, Hans; Willenbockel, Dirk

This paper compares the theoretical specification of production and technical change across the partial equilibrium (PE) and computable general equilibrium (CGE) models of the global agricultural and food system included in the AgMIP model comparison study. The two modeling approaches have different theoretical underpinnings concerning the scope of economic activity they capture and how they represent technology and the behavior of supply and demand in markets. This paper focuses on their different specifications of technology and supply behavior, comparing their theoretical and empirical treatments. While the models differ widely in their specifications of technology, both within and between the PEmore » and CGE classes of models, we find that the theoretical responsiveness of supply to changes in prices can be similar, depending on parameter choices that define the behavior of supply functions over the domain of applicability defined by the common scenarios used in the AgMIP comparisons. In particular, we compare the theoretical specification of supply in CGE models with neoclassical production functions and PE models that focus on land and crop yields in agriculture. In practice, however, comparability of results given parameter choices is an empirical question, and the models differ in their sensitivity to variations in specification. To illustrate the issues, sensitivity analysis is done with one global CGE model, MAGNET, to indicate how the results vary with different specification of technical change, and how they compare with the results from PE models.« less

TOPICAL REVIEW: Electric current activated/assisted sintering (ECAS): a review of patents 1906-2008

NASA Astrophysics Data System (ADS)

Grasso, Salvatore; Sakka, Yoshio; Maizza, Giovanni

2009-10-01

The electric current activated/assisted sintering (ECAS) is an ever growing class of versatile techniques for sintering particulate materials. Despite the tremendous advances over the last two decades in ECASed materials and products there is a lack of comprehensive reviews on ECAS apparatuses and methods. This paper fills the gap by tracing the progress of ECAS technology from 1906 to 2008 and surveys 642 ECAS patents published over more than a century. It is found that the ECAS technology was pioneered by Bloxam (1906 GB Patent No. 9020) who developed the first resistive sintering apparatus. The patents were searched by keywords or by cross-links and were withdrawn from the Japanese Patent Office (342 patents), the United States Patent and Trademark Office (175 patents), the Chinese State Intellectual Property Office of P.R.C. (69 patents) and the World Intellectual Property Organization (12 patents). A subset of 119 (out of 642) ECAS patents on methods and apparatuses was selected and described in detail with respect to their fundamental concepts, physical principles and importance in either present ECAS apparatuses or future ECAS technologies for enhancing efficiency, reliability, repeatability, controllability and productivity. The paper is divided into two parts, the first deals with the basic concepts, features and definitions of basic ECAS and the second analyzes the auxiliary devices/peripherals. The basic ECAS is classified with reference to discharge time (fast and ultrafast ECAS). The fundamental principles and definitions of ECAS are outlined in accordance with the scientific and patent literature.

Co-streaming classes: a follow-up study in improving the user experience to better reach users.

PubMed

Hayes, Barrie E; Handler, Lara J; Main, Lindsey R

2011-01-01

Co-streaming classes have enabled library staff to extend open classes to distance education students and other users. Student evaluations showed that the model could be improved. Two areas required attention: audio problems experienced by online participants and staff teaching methods. Staff tested equipment and adjusted software configuration to improve user experience. Staff training increased familiarity with specialized teaching techniques and troubleshooting procedures. Technology testing and staff training were completed, and best practices were developed and applied. Class evaluations indicate improvements in classroom experience. Future plans include expanding co-streaming to more classes and on-going data collection, evaluation, and improvement of classes.

Playing at Work: The Intersection of Race, Class, and Gender with Power Structures of Work and Production.

ERIC Educational Resources Information Center

Corrado, Marisa; Glasberg, Davita Silfen; Merenstein, Beth; Peele, Melanie R.

2000-01-01

Focuses on an exercise where students were assigned social roles based on gender, class, and race and then selected division of labor and reward structures in order to explore inequality in work and production. Offers a review of literature on the power structure of work and production and an evaluation of the exercise. (CMK)

13 CFR 121.1202 - When will a waiver of the Nonmanufacturer Rule be granted for a class of products?

Code of Federal Regulations, 2010 CFR

2010-01-01

... segmentation of a Federal market, SBA will not necessarily use market definitions dependent on airline radius... the Federal market for that class of products. (b) Federal market means acquisitions by the Federal... market area for a product, SBA presumes that the entire United States is the relevant Federal market...

Low-Cost Quality Control and Nondestructive Evaluation Technologies for General Aviation Structures

NASA Technical Reports Server (NTRS)

Cramer, K. Elliott; Gavinsky, Bob; Semanskee, Grant

1998-01-01

NASA's Advanced General Aviation Transport Experiments (AGATE) Program has as a goal to reduce the overall cost of producing private aviation aircraft while maintaining the safety of these aircraft. In order to successfully meet this goal, it is necessary to develop nondestructive inspection techniques which will facilitate the production of the materials used in these aircraft and assure the quality necessary to maintain airworthiness. This paper will discuss a particular class of general aviation materials and several nondestructive inspection techniques that have proven effective for making these inspections. Additionally, this paper will discuss the investigation and application of other commercially available quality control techniques applicable to these structures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Volkoff, T. J., E-mail: adidasty@gmail.com

We motivate and introduce a class of “hierarchical” quantum superposition states of N coupled quantum oscillators. Unlike other well-known multimode photonic Schrödinger-cat states such as entangled coherent states, the hierarchical superposition states are characterized as two-branch superpositions of tensor products of single-mode Schrödinger-cat states. In addition to analyzing the photon statistics and quasiprobability distributions of prominent examples of these nonclassical states, we consider their usefulness for highprecision quantum metrology of nonlinear optical Hamiltonians and quantify their mode entanglement. We propose two methods for generating hierarchical superpositions in N = 2 coupled microwave cavities, exploiting currently existing quantum optical technology formore » generating entanglement between spatially separated electromagnetic field modes.« less

"A finer and fairer future": commodifying wage earners in American pulp science fiction.

PubMed

Drown, Eric

2006-09-01

Long-neglected by scholars, the pulp science fiction (SF) magazines of the Gernsback era (1926-1937) are due for re-examination. Presumed to be sub-literary stories for boys or, paradoxically, escapist leisure reading for practicing scientists and technicians, the SF from this period is actually neither. It is a powerful resource for understanding the ways ordinary people engaged with the promise and peril of industrial modernity. Published by a passionate entrepreneur seeking fame and fortune, composed by writers paid piecework rates and read by young science and technology enthusiasts aspiring to authentic remunerative work, the earliest pulp SF necessarily provoked inter-class discussions about labor, management, production and consumption.

27 CFR 4.62 - Mandatory statements.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., type, and distinctive designation. The advertisement shall contain a conspicuous statement of the class, type, or distinctive designation to which the product belongs, corresponding with the statement of class, type, or distinctive designation which is required to appear on the label of the product. (c...

Having your cake and eating it: office of fair trading proposal for funding new drugs to benefit patients and innovative companies.

PubMed

Godman, Brian; Haycox, Alan; Schwabe, Ulrich; Joppi, Roberta; Garattini, Silvio

2008-01-01

There are insufficient resources in the UK to fund all new technologies and new indications approved by the National Institute for Health and Clinical Excellence (NICE). Diverting funding from existing sources will have a detrimental effect on the provision of other priority services. The UK Office of Fair Trading (OFT) recently suggested a value-based pricing approach that appears workable but has generated considerable debate. Their proposal of a 25% premium for the originator product once generics are available is more generous than seen in a number of other European countries, where typically only the lowest priced product is reimbursed. The OFT proposal for a maximum 50% premium for patent-protected products, versus the prices of generics in a class or related classes, is also more generous than the proposed reforms for the pricing of proton pump inhibitors in Sweden or current reforms in Germany. In our opinion, the OFT proposals are persuasive and in accordance with the reforms seen in other European countries, and therefore should be adopted. The alternatives to fully funding new drugs or new indications as approved by NICE are either tightening the cost per QALY threshold, giving NICE an annual national budget to fund its advice alongside suggested areas for disinvestment, proactively switching patients from high-cost brand-name drugs to generics, or further delaying funding for new drugs and new indications approved by NICE. The majority of these suggestions are not in the best interests of patients or innovative pharmaceutical companies seeking to reap the rewards of their efforts.