Ergonomics strategies and actions for achieving productive use of an ageing work-force.

PubMed

Kumashiro, M

2000-07-01

In this report, a basic ERGOMA (Ergonomics in Industrial Management) strategy is proposed as a policy for corporate production and employment in countries where ageing populations and reduced birth rates are imminent, and a strategy related to this is proposed. Specifically, as a strategy at the company level, the results of survey studies aimed at the development of methods for determining job capacity, to enable effective use of the labour of ageing workers, were summarized. A number of the insights gained here are steps in the development of a foundational methodology for practical use, and in actual practice a number of these insights must be subjected to measurements. However, the theory and newly developed methodology described here are thought to represent significant changes from the approaches to job capacity diagnosis and assessment published in the past and from the stance towards utilization of an ageing work-force. The author is confident that this represents new progress in one of the ergonomics approach to dealing with the working environment of ageing workers and an ageing work-force in general.

Chapter 1.1 Process Scale-Up of Cellulose Nanocrystal Production to 25 kg per Batch at the Forest Products Laboratory

Treesearch

Richard S. Reiner; Alan W. Rudie

2013-01-01

The Fiber and Chemical Sciences Research Work Unit at the Forest Products Laboratory began working out the preparation of cellulose nanocrystals in 2006, using the method of Dong, Revol, and Gray. Initial samples were provided to several scientists within the Forest Service. Continued requests for this material forced scale-up from the initial 20 g scale to kg...

Muscle Deoxygenation Causes Muscle Fatigue

NASA Technical Reports Server (NTRS)

Murthy, G.; Hargens, A. R.; Lehman, S.; Rempel, D.

1999-01-01

Muscle fatigue is a common musculoskeletal disorder in the work place, and may be a harbinger for more disabling cumulative trauma disorders. Although the cause of fatigue is multifactorial, reduced blood flow and muscle oxygenation may be the primary factor in causing muscle fatigue during low intensity muscle exertion. Muscle fatigue is defined as a reduction in muscle force production, and also occurs among astronauts who are subjected to postural constraints while performing lengthy, repetitive tasks. The objectives of this research are to: 1) develop an objective tool to study the role of decreased muscle oxygenation on muscle force production, and 2) to evaluate muscle fatigue during prolonged glovebox work.

Peter Drucker, Knowledge Work, and the Structure of Schools.

ERIC Educational Resources Information Center

Tucker, Marc S.

1988-01-01

Discusses Peter Drucker's recommendations in "The Age of Discontinuity" (1969) concerning the decline of manual work, the ascendancy of knowledge work, and the relationship between economic stability and an educated, productive work force. Applies Drucker's principles to the movement to restructure schools, which aims to make line…

The theory of social services in disaccumulationist capitalism.

PubMed

Hirschhorn, L

1979-01-01

The theory of social services today must be based on a more general theory of the "disaccumulation" of capitalist society. Capitalist society disaccumulates as new productive forces emerge within the framework of the capitalist labor market. These forces are expressed abstractly in new sources of productivity based on information and organization and concretely in a new organization of work. This new organization of work breaks down the old capitalist division between labor and non-labor time and poses instead a more fluid interaction and integration of work and non-work. Capitalist society, however, disaccumulates through social crisis. The reorganization of work is simultaneously expressed as the decay of the labor market. This decay delegitimates social services and creates the present social service crisis. Social services can find their new sources of legitimacy only if social classes can move past the crisis of disaccumulation and find the appropriate new forms of social life based on the emerging non-capitalist organization of work.

Chemical Work Force Drops Steeply in 1985.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1986

1986-01-01

Provides data on industrial employment in the chemical industry, comparing subgroups of production for all employees and for scientists and engineers. Gives company by company sales per employee breakdown. Compares wages among industry subgroups. Cites productivity measures. (JM)

Employment in the U.S. Chemical Industry. Chemical Work Force Tops 1.1 Million.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1990

1990-01-01

The annual census of industrial employment, production workers, women, the workweek, scientists and engineers, chemical employment, wages, and productivity in the chemical industry is presented. Trends in the numbers of workers, productivity, and unit labor costs are illustrated in graphs. (CW)

Tiffany Diamonds and Classical Music as Influences on the Performance of "Don Juan in Hell".

ERIC Educational Resources Information Center

Johnson, Jim

This paper analyzes Paul Gregory's 1951 production of "Don Juan in Hell," now considered to be a seminal work in the development of professional and educational readers theatre. The paper contends that the production, which presented a nondramatic work without the usual emphasis on design and spectacle, forced a reexamination of the role…

CHANGING CONCEPTS OF PRODUCTIVE LIVING.

ERIC Educational Resources Information Center

BOYD, ROBERT D.

AT A CONFERENCE OF ADULT EDUCATORS DESIGNED TO BRING INTO FOCUS NEW PERSPECTIVES OF THE ROLES OF ADULT EDUCATION, PAPERS WERE PRESENTED ON THE CHANGING CONCEPTS OF PRODUCTIVE LIVING AND THE RELATIONSHIP BETWEEN CONCERN FOR PRODUCTIVE LIVING AND ADULT EDUCATION. AN OVERVIEW PROVIDED A WORKING ORIENTATION AND DESCRIBED THE BASIC FORCES AND PROBLEMS…

Flow Modulation and Force Control in Insect Fast Maneuver

NASA Astrophysics Data System (ADS)

Li, Chengyu; Dong, Haibo; Zhang, Wen; Gai, Kuo

2012-11-01

In this work, an integrated study combining high-speed photogrammetry and direct numerical simulation (DNS) is used to study free flying insects in fast maneuver. Quantitative measurement has shown the significant differences between quad-winged flyers such as dragonfly and damselfly and two-winged flyers such as cicada. Comparisons of unsteady 3D vortex formation and associated aerodynamic force production reveal the different mechanisms used by insects in fast turn. This work is supported by NSF CBET-1055949.

Improving Productivity in the Work Force: Implications for Research and Development in Vocational Education. Occasional Paper No. 72.

ERIC Educational Resources Information Center

Sullivan, Dennis J.

Declining productivity is a major problem in the American economy. Gains in productivity, and finally, actual rates of productivity, have been declining since the late 1960s. Specific problems arising as a result of this decline in productivity are the inflationary pressures that we face as a nation, the increased regulatory environment under…

The categorisation of swimming start performance with reference to force generation on the main block and footrest components of the Omega OSB11 start blocks.

PubMed

Slawson, Sian E; Conway, Paul P; Cossor, Jodi; Chakravorti, Nandini; West, Andrew A

2013-01-01

Work presented in this paper provides a methodology for categorising swimming start performance based on peak force production on the main block and footrest components of the Omega OSB11 starting block. A total of 46 elite British swimmers were tested, producing over 1000 start trials. Overwater cameras were synchronised to a specifically designed start block that allowed the measurement of force production via two sets of four, tri-axis, force transducers; one set in the main block and one in the footrest. Data were then analysed, segregating trials for gender. Each start was categorised, with respect to the peak force production in horizontal and vertical components, into one of nine categories. Three performance indicators, i.e. block time, take-off velocity and distance of entry, were used to assess whether differences in performance could be correlated with these categories. Results from these data suggest that swimmers generating higher than average peak forces were more likely to produce a better overall start performance than those who produced forces lower than the average, for this population of athletes.

Partnership with Industry: Film Production Technology.

ERIC Educational Resources Information Center

Rietveld, Richard; And Others

The 1988 final report of a task force from the Florida Postsecondary Education Planning Commission stated that in order to ensure continued growth of the motion picture film industry in the state, the postsecondary community must provide a well-trained and competent work force adept in all aspects of the industry. The film industry is a growing…

The Blake Interaction Model for Task Force Program Development in Vocational Education.

ERIC Educational Resources Information Center

Blake, Duane L.

The Blake Interaction Model presented in this manual is designed to eliminate three problems which usually confront a task force charged with the responsibility of program development in a conference setting: (1) how to involve simultaneously several work groups in the productive capacity developing solutions for several separate problems; (2) how…

The Entrepreneurial Spirit and the Evolving Workplace.

ERIC Educational Resources Information Center

Workforce Economics, 1999

1999-01-01

A growing percentage of the U.S. work force depends upon entrepreneurial skills and behaviors to succeed in the new opportunity economy. The explosion of technology, accelerating need for new and different products, globalization of business, and demand for speed in delivery have shifted the economic driving force toward companies that can meet…

U.S. Productivity: The Challenges Ahead.

ERIC Educational Resources Information Center

Workforce Economics, 1999

1999-01-01

Despite the soaring stock market, low unemployment, and low inflation rate, the long-term prospects for U.S. economic health remain a cause for concern. Labor productivity has slowed since 1973. As a result of this slowdown, many companies are investing in work force development and new equipment to boost productivity. Long-term economic health…

An approach to human work systems development under the circumstances of an aging society and international business operations.

PubMed

Ikeda, Y T

1997-12-01

At least three serious aspects of problems exist as obstacles for the national economy in Japan to grow or even to maintain its present level: the lack of natural resources, the trends of a decreasing young labor force, and an increase in the shift of domestic business operations to foreign countries. Although top managers make the decisions of product or service planning, or both, work systems designers are also responsible for conserving the resources. An action against the decrease of the young work force is needed to maintain work systems in an operable condition. The business shifts to foreign countries affect all the people, who are losing job opportunities. The present paper presents an approach to reorienting human work systems within the scope of the work systems designers' roles under the circumstance of these social environments. The following discussion is based on the assumptions that work organizations be productive for themselves and the world, effective and efficient for themselves, and contributive to their communities and the world. In essence, an approach to human work systems development should be fair to managers and workers alike. Presented are cases of these work systems as developed along the perspectives mentioned.

What Is the Meaning of the Physical Magnitude "Work"?

ERIC Educational Resources Information Center

Kanderakis, Nikos

2014-01-01

Usually, in physics textbooks, the physical magnitude "work" is introduced as the product of a force multiplied by its displacement, in relation to the transfer of energy. In other words, "work" is presented as an internal affair of physics theory, while its relation to the world of experience, that is its empirical meaning, is…

Discourse Appropriation and Category Boundary Work: Casual Teachers in the Market

ERIC Educational Resources Information Center

Charteris, Jennifer; Jenkins, Kathryn; Jones, Marguerite; Bannister-Tyrrell, Michelle

2017-01-01

With the increasing casualisation of the teacher labour force, there is little written on the experiences of casual teachers and the challenges they face in brokering professional identities within constantly shifting and uncertain work contexts. Being a category bound casual teacher (a product of category boundary work) is a complex subject…

Work and Family. Policies for a Changing Work Force.

ERIC Educational Resources Information Center

Ferber, Marianne A., Ed.; And Others

This book reviews changes in work and family structures and their effects on worker productivity and employer practices. The first two chapters introduce the topic and trace the history of family structure and composition in the United States, the changing nature of employment, and the central role of the employment relationship to the social…

The impact of hepatitis C on labor force participation, absenteeism, presenteeism and non-work activities.

PubMed

DiBonaventura, Marco daCosta; Wagner, Jan-Samuel; Yuan, Yong; L'Italien, Gilbert; Langley, Paul; Ray Kim, W

2011-01-01

Between 2.7 and 3.9 million people are currently infected with the hepatitis C virus (HCV) in the United States. Although many studies have investigated the impact of HCV on direct healthcare costs, few studies have estimated the indirect costs associated with the virus using a nationally-representative dataset. Using data from the 2009 United States (US) National Health and Wellness Survey, patients who reported a hepatitis C diagnosis (n = 695) were compared to controls on labor force participation, productivity loss, and activity impairment after adjusting for demographics, health risk behaviors, and comorbidities. All analyses applied sampling weights to project to the population. Patients with HCV were significantly less likely to be in the labor force than controls and reported significantly higher levels of absenteeism (4.88 vs. 3.03%), presenteeism (16.69 vs. 13.50%), overall work impairment (19.40 vs.15.35%), and activity impairment (25.01 vs. 21.78%). A propensity score matching methodology replicated many of these findings. While much of the work on HCV has focused on direct costs, our results suggest indirect costs should not be ignored when quantifying the societal burden of HCV. To our knowledge, this is the first study which has utilized a large, nationally-representative data source for identifying the impact of HCV on labor force participation and work and activity impairment using both a propensity-score matching and a regression modeling framework. All data were patient-reported (including HCV diagnosis and work productivity), which could have introduced some subjective biases.

The effect of intrinsic muscular nonlinearities on the energetics of locomotion in a computational model of an anguilliform swimmer.

PubMed

Hamlet, Christina; Fauci, Lisa J; Tytell, Eric D

2015-11-21

Animals move through their environments using muscles to produce force. When an animal׳s nervous system activates a muscle, the muscle produces different amounts of force depending on its length, its shortening velocity, and its time history of force production. These muscle forces interact with forces from passive tissue properties and forces from the external environment. Using an integrative computational model that couples an elastic, actuated model of an anguilliform, lamprey-like swimmer with a surrounding Navier-Stokes fluid, we study the effects of this coupling between the muscle force and the body motion. Swimmers with different forms of this coupling can achieve similar motions, but use different amounts of energy. The velocity dependence is the most important property of the ones we considered for reducing energy costs and helping us to stabilize oscillations. These effects are strongly influenced by how rapidly the muscle deactivates; if force decays too slowly, muscles on opposite sides of the body end up fighting each other, increasing energy cost. Work-dependent deactivation, an effect that causes a muscle to deactivate more rapidly if it has recently produced mechanical work, works together with the velocity dependence to reduce the energy cost of swimming. Copyright © 2015 Elsevier Ltd. All rights reserved.

Walking, running and the evolution of short toes in humans.

PubMed

Rolian, Campbell; Lieberman, Daniel E; Hamill, Joseph; Scott, John W; Werbel, William

2009-03-01

The phalangeal portion of the forefoot is extremely short relative to body mass in humans. This derived pedal proportion is thought to have evolved in the context of committed bipedalism, but the benefits of shorter toes for walking and/or running have not been tested previously. Here, we propose a biomechanical model of toe function in bipedal locomotion that suggests that shorter pedal phalanges improve locomotor performance by decreasing digital flexor force production and mechanical work, which might ultimately reduce the metabolic cost of flexor force production during bipedal locomotion. We tested this model using kinematic, force and plantar pressure data collected from a human sample representing normal variation in toe length (N=25). The effect of toe length on peak digital flexor forces, impulses and work outputs was evaluated during barefoot walking and running using partial correlations and multiple regression analysis, controlling for the effects of body mass, whole-foot and phalangeal contact times and toe-out angle. Our results suggest that there is no significant increase in digital flexor output associated with longer toes in walking. In running, however, multiple regression analyses based on the sample suggest that increasing average relative toe length by as little as 20% doubles peak digital flexor impulses and mechanical work, probably also increasing the metabolic cost of generating these forces. The increased mechanical cost associated with long toes in running suggests that modern human forefoot proportions might have been selected for in the context of the evolution of endurance running.

An R package for simulating growth and organic wastage in aquaculture farms in response to environmental conditions and husbandry practices

PubMed Central

Baldan, Damiano; Porporato, Erika Maria Diletta; Pastres, Roberto

2018-01-01

A new R software package, RAC, is presented. RAC allows to simulate the rearing cycle of 4 species, finfish and shellfish, highly important in terms of production in the Mediterranean Sea. The package works both at the scale of the individual and of the farmed population. Mathematical models included in RAC were all validated in previous works, and account for growth and metabolism, based on input data characterizing the forcing functions—water temperature, and food quality/quantity. The package provides a demo dataset of forcings for each species, as well as a typical set of husbandry parameters for Mediterranean conditions. The present work illustrates RAC main features, and its current capabilities/limitations. Three test cases are presented as a proof of concept of RAC applicability, and to demonstrate its potential for integrating different open products nowadays provided by remote sensing and operational oceanography. PMID:29723208

Ontogeny of aerodynamics in mallards: comparative performance and developmental implications.

PubMed

Dial, Terry R; Heers, Ashley M; Tobalske, Bret W

2012-11-01

Wing morphology correlates with flight performance and ecology among adult birds, yet the impact of wing development on aerodynamic capacity is not well understood. Recent work using chukar partridge (Alectoris chukar), a precocial flier, indicates that peak coefficients of lift and drag (C(L) and C(D)) and lift-to-drag ratio (C(L):C(D)) increase throughout ontogeny and that these patterns correspond with changes in feather microstructure. To begin to place these results in a comparative context that includes variation in life-history strategy, we used a propeller and force-plate model to study aerodynamic force production across a developmental series of the altricial-flying mallard (Anas platyrhynchos). We observed the same trend in mallards as reported for chukar in that coefficients of vertical (C(V)) and horizontal force (C(H)) and C(V):C(H) ratio increased with age, and that measures of gross-wing morphology (aspect ratio, camber and porosity) in mallards did not account for intraspecific trends in force production. Rather, feather microstructure (feather unfurling, rachis width, feather asymmetry and barbule overlap) all were positively correlated with peak C(V):C(H). Throughout ontogeny, mallard primary feathers became stiffer and less transmissive to air at both macroscale (between individual feathers) and microscale (between barbs/barbules/barbicels) levels. Differences between species were manifest primarily as heterochrony of aerodynamic force development. Chukar wings generated measurable aerodynamic forces early (<8 days), and improved gradually throughout a 100 day ontogenetic period. Mallard wings exhibited delayed aerodynamic force production until just prior to fledging (day 60), and showed dramatic improvement within a condensed 2-week period. These differences in timing may be related to mechanisms of escape used by juveniles, with mallards swimming to safety and chukar flap-running up slopes to take refuge. Future comparative work should test whether the need for early onset of aerodynamic force production in the chukar, compared with delayed, but rapid, change in the mallard wing, leads to a limited repertoire of flight behavior in adult chukar compared with mallards.

Social Significance of Fundamental Science Common to all Mankind

NASA Astrophysics Data System (ADS)

Zel'Dovich, Ya. B.

It is a challenge of science to play a great role in solution of the problem of meeting material and spiritual human demands. The argument is known that science has become a productive force. When characterizing economy of one or another country or region, it is a practice to speak about science-intensive works, i.e., those where production and competitiveness are directly related to a science level. The science-intensive works include, for example, production of microelectronic circuits and their application in computer and information science or production of pharmaceutical preparations using gene engineering. This list could be continued indefinitely…

YAP is essential for mechanical force production and epithelial cell proliferation during lung branching morphogenesis

PubMed Central

Lin, Chuwen; Yao, Erica; Zhang, Kuan; Jiang, Xuan; Croll, Stacey; Thompson-Peer, Katherine; Chuang, Pao-Tien

2017-01-01

Branching morphogenesis is a fundamental program for tissue patterning. We show that active YAP, a key mediator of Hippo signaling, is distributed throughout the murine lung epithelium and loss of epithelial YAP severely disrupts branching. Failure to branch is restricted to regions where YAP activity is removed. This suggests that YAP controls local epithelial cell properties. In support of this model, mechanical force production is compromised and cell proliferation is reduced in Yap mutant lungs. We propose that defective force generation and insufficient epithelial cell number underlie the branching defects. Through genomic analysis, we also uncovered a feedback control of pMLC levels, which is critical for mechanical force production, likely through the direct induction of multiple regulators by YAP. Our work provides a molecular pathway that could control epithelial cell properties required for proper morphogenetic movement and pattern formation. DOI: http://dx.doi.org/10.7554/eLife.21130.001 PMID:28323616

What Do Technicians Do? EQW Working Papers WP17.

ERIC Educational Resources Information Center

Barley, Stephen R.

Between 1950 and 1988, the number of professional and technical workers increased by 282% while the labor force as a whole only increased by 94%. Most persons employed as technicians work on or with reputedly complex technologies. Most work at the empirical interface between a larger production process and the materials on which the process…

Work, Family, and the Faculty Career. New Pathways: Faculty Career and Employment for the 21st Century Working Paper Series, Inquiry #8.

ERIC Educational Resources Information Center

Gappa, Judith M.; MacDermid, Shelley M.

This paper, one in a series about the priorities of the professoriate, examines work-family issues as they affect faculty recruitment, retention, and productivity. Following a brief discussion of changing work-force demographics, the first part of the paper examines the structure of an academic career, focusing particularly on junior faculty and…

Task Force on Faculty Productivity.

ERIC Educational Resources Information Center

Hozeski, Bruce W.; And Others

A survey was conducted of 532 faculty members and 11 administrators at Ball State University (Indiana) concerning the number of hours that faculty typically work; extent of their time devoted to teaching, research, and service/administration; how faculty workload differs by rank and status; and how faculty feel about productivity issues. Findings…

COMPARISON OF SCANNING ELECTRON AND ATOMIC FORCE MICROSCOPY OF SURFACE FINISHES ON STAINLESS STEEL THAT REDUCE BACTERIAL ATTACHMENT

EPA Science Inventory

Bacteria adhere to food products and processing surfaces that can cross-contaminate other products and work surfaces (Arnold, 1998). Using materials for food processing surfaces that are resistant to bacterial contamination could enhance food safety. Stainless steel, although sus...

Competitive Manufacturing: New Strategies for Regional Development.

ERIC Educational Resources Information Center

Rosenfeld, Stuart A.

In the past, economic development in the rural United States, particularly in the rural South, relied principally on the attractiveness of a low-wage work force to mass-production manufacturing industries. Now however, the viability of the traditional mass-production economy's organizational structure and operating procedures has been eroded by…

On-the-Job Productivity Losses Among Employees With Health Problems: The Role of Work Accommodations.

PubMed

Gifford, Brian; Zong, Yang

2017-09-01

Debates about the productivity impact of work accommodations typically focus on employment and labor force participation outcomes. This study considers whether accommodations mediate on-the-job productivity losses among employees who report health problems. The study uses ordered logistic regression to predict employees' self-reported productivity losses as a function of health problems and experiences with needed work accommodations. On average, the odds that an employee who did not get a needed accommodation reported higher levels of lost productivity are 5.11 times the odds for an employee who got a needed accommodation. Although health problems make it difficult for many employees to perform well on the job, accommodations could reduce productivity losses in some cases. Nonetheless, more research on the impact of specific kinds of accommodations for different chronic conditions is warranted.

Michael Seibert | NREL

Science.gov Websites

Artificial Photosynthesis for H2Production, April 22-23, 2003, sponsored by the Air Force Office of Scientific Research. Member, US-Australian Working Group on Artificial Photosynthesis, August 2002-2003

[Women and work. Panorama in Latin America 1960-1990].

PubMed

Espinosa, G

1994-01-01

Significant increases have occurred over the past 40 years in the labor force participation of Latin American women. The changes have been caused primarily by transformations in the economic system, but also in part by changes of attitude regarding the role of women in economic development and household survival. Average female labor force participation rates are difficult to compare over time and between countries because of differing cultural patterns concerning work, use of differing concepts of productive work and labor force, and different time periods of coverage. Some common trends can be observed in labor force participation despite the data limitations. A decline occurred in overall participation rates, at least until 1980, while female participation rates increased continually over the entire period. Several factors have been suggested to explain the overall decline, among them longer school attendance by young people. The Latin American Economic Commission classified Latin American countries into four groups according to their level of economic and social modernization. The role of women in the labor market and in domestic work is associated with the level of modernization. In all four groups, female activity rates have systematically increased in all countries. The distribution of women in the different productive sectors varied in the four groups. The two most developed groups concentrate a large part of the urban population, and in these groups the increase in female economic participation has been most pronounced. Establishment of maquiladora industries has been particularly associated with growth of female labor force participation in the past 15 years. The work of maquiladoras is associated with such problems of the informal sector as poor hygiene and exploitation. The informal sector is known to have grown considerably and to have permitted survival of many families during the economic crisis of the 1980s, but sufficient data is not yet available to gauge its true size.

Using a health and productivity dashboard: a case example.

PubMed

Riedel, John E

2007-01-01

Health and productivity management is complicated and requires some strategies that help simplify the endeavor for employers. The use of a "dashboard" concept implies that raw information about employee health can be arranged in ways that help decision-makers better understand the scope and magnitude of health issues within their work force. In this edition of the Art we look at a case study of the use of a health and productivity dashboard within an employer organization. As health promotion professionals that work in worksite settings struggle with portraying the economic importance of worker health, a health and productivity dashboard (HPD) may provide a very real strategic advantage.

Reduced muscle fiber force production and disrupted myofibril architecture in patients with chronic rotator cuff tears.

PubMed

Mendias, Christopher L; Roche, Stuart M; Harning, Julie A; Davis, Max E; Lynch, Evan B; Sibilsky Enselman, Elizabeth R; Jacobson, Jon A; Claflin, Dennis R; Calve, Sarah; Bedi, Asheesh

2015-01-01

A persistent atrophy of muscle fibers and an accumulation of fat, collectively referred to as fatty degeneration, commonly occur in patients with chronic rotator cuff tears. The etiology of fatty degeneration and function of the residual rotator cuff musculature have not been well characterized in humans. We hypothesized that muscles from patients with chronic rotator cuff tears have reduced muscle fiber force production, disordered myofibrils, and an accumulation of fat vacuoles. The contractility of muscle fibers from biopsy specimens of supraspinatus muscles of 13 patients with chronic full-thickness posterosuperior rotator cuff tears was measured and compared with data from healthy vastus lateralis muscle fibers. Correlations between muscle fiber contractility, American Shoulder and Elbow Surgeons (ASES) scores, and tear size were analyzed. Histology and electron microscopy were also performed. Torn supraspinatus muscles had a 30% reduction in maximum isometric force production and a 29% reduction in normalized force compared with controls. Normalized supraspinatus fiber force positively correlated with ASES score and negatively correlated with tear size. Disordered sarcomeres were noted, along with an accumulation of lipid-laden macrophages in the extracellular matrix surrounding supraspinatus muscle fibers. Patients with chronic supraspinatus tears have significant reductions in muscle fiber force production. Force production also correlates with ASES scores and tear size. The structural and functional muscle dysfunction of the residual muscle fibers is independent of the additional area taken up by fibrotic tissue. This work may help establish future therapies to restore muscle function after the repair of chronically torn rotator cuff muscles. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The Business and Industry Perspective on U.S. Productivity: Implications for Vocational Education. Occasional Paper No. 82.

ERIC Educational Resources Information Center

Miller, Thomas W.

The current lag in U. S. productivity has many implications for vocational education. Before discussing the role of vocational education in easing the productivity crisis, it is necessary to understand the causes of the crisis. Included among these are rising energy prices; the segmentation of the American work force, by both geography and skills;…

Will America Choose High Skills or Low Wages?

ERIC Educational Resources Information Center

Magaziner, Ira; Clinton, Hillary Rodham

1992-01-01

To compete more effectively in the global economy, the U.S. must reorganize the way people work in stores, factories, and elsewhere. Two factors hinder production of a highly educated work force: lack of a clear standard of achievement and insufficient student motivation. A new educational performance standard (Certificate of Initial Mastery) is…

Using ergonomics to enhance safe production at a surface coal mine--a case study with powder crews.

PubMed

Torma-Krajewski, Janet; Wiehagen, William; Etcheverry, Ann; Turin, Fred; Unger, Richard

2009-10-01

Job tasks that involve exposure to work-related musculoskeletal disorder (WMSD) risk factors may impact both the risk of injury and production downtime. Common WMSD risks factors associated with mining tasks include forceful exertions, awkward postures, repetitive motion, jolting and jarring, forceful gripping, contact stress, and whole body and segmental vibration. Mining environments that expose workers to temperature/humidity extremes, windy conditions, and slippery and uneven walking surfaces also contribute to injury risk. National Institute for Occupational Safety and Health (NIOSH) researchers worked with powder crew members from the Bridger Coal Company to identify and rank routine work tasks based on perceived exposure to WMSD risk factors. This article presents the process followed to identify tasks that workers believed involved the greatest exposure to risk factors and discusses risk reduction strategies. Specifically, the proposed prill truck design changes addressed cab ingress/egress, loading blast holes, and access to the upper deck of the prill truck.

Increase Productivity Through Knowledge Management

NASA Astrophysics Data System (ADS)

Gavrikova, N. A.; Dolgih, I. N.; Dyrina, E. N.

2016-04-01

Increase in competition level requires companies to improve the efficiency of work force use characterized by labor productivity. Professional knowledge of staff and its experience play the key role in it. The results of Extrusion Line operator’s working time analysis are performed in this article. The analysis revealed that the reasons of working time ineffective use connected with inadequate information exchange and knowledge management in the company. Authors suggest the way to solve this problem: the main sources of knowledge in engineering enterprise have been defined, the conditions of success and the stages of knowledge management control have been stated.

The effect of workstation and task variables on forces applied during simulated meat cutting.

PubMed

McGorry, Raymond W; Dempsey, Patrick G; O'Brien, Niall V

2004-12-01

The purpose of the study was to investigate factors related to force and postural exposure during a simulated meat cutting task. The hypothesis was that workstation, tool and task variables would affect the dependent kinetic variables of gripping force, cutting moment and the dependent kinematic variables of elbow elevation and wrist angular displacement in the flexion/extension and radial/ulnar deviation planes. To evaluate this hypothesis a 3 x 3 x 2 x 2 x 2 (surface orientation by surface height by blade angle by cut complexity by work pace) within-subject factorial design was conducted with 12 participants. The results indicated that the variables can act and interact to modify the kinematics and kinetics of a cutting task. Participants used greater grip force and cutting moment when working at a pace based on productivity. The interactions of the work surface height and orientation indicated that the use of an adjustable workstation could minimize wrist deviation from neutral and improve shoulder posture during cutting operations. Angling the knife blade also interacted with workstation variables to improve wrist and upper extremity posture, but this benefit must be weighed against the potential for small increases in force exposure.

Labor-Force Participation, Policies & Practices in an Aging America: Adaptation Essential for a Healthy & Resilient Population.

PubMed

Berkman, Lisa F; Börsch-Supan, Axel; Avendano, Mauricio

2015-01-01

Population aging in the United States poses challenges to societal institutions while simultaneously creating opportunities to build a more resilient, successful, and cohesive society. Work organization and labor-force participation are central to both the opportunities and challenges posed by our aging society. We argue that expectations about old age have not sufficiently adapted to the reality of aging today. Our institutions need more adaptation in order to successfully face the consequences of demographic change. Although this adaptation needs to focus especially on work patterns among the "younger elderly," our society has to change its general attitudes toward work organization and labor-force participation, which will have implications for education and health care. We also show that work's beneficial effects on well-being in older ages are often neglected, while the idea that older workers displace younger workers is a misconception emerging from the "lump of labor" fallacy. We conclude, therefore, that working at older ages can lead to better quality of life for older people and to a more productive and resilient society overall.

Operationalizing Space Weather Products - Process and Issues

NASA Astrophysics Data System (ADS)

Scro, K. D.; Quigley, S.

2006-12-01

Developing and transitioning operational products for any customer base is a complicated process. This is the case for operational space weather products and services for the USAF. This presentation will provide information on the current state of affairs regarding the process required to take an idea from the research field to the real-time application of 24-hour space weather operations support. General principles and specific issues are discussed and will include: customer requirements, organizations in-play, funding, product types, acquisition of engineering and validation data, security classification, version control, and various important changes that occur during the process. The author's viewpoint is as an individual developing space environmental system-impact products for the US Air Force: 1) as a member of its primary research organization (Air Force Research Laboratory), 2) working with its primary space environment technology transition organization (Technology Application Division of the Space and Missile Systems Center, SMC/WXT), and 3) delivering to the primary sponsor/customer of such system-impact products (Air Force Space Command). The experience and focus is obviously on specific military operationalization process and issues, but most of the paradigm may apply to other (commercial) enterprises as well.

Employee Sabbaticals: Who Benefits and Why.

ERIC Educational Resources Information Center

Toomey, Edmund L.; Connor, Joan M.

1988-01-01

Discusses benefits of employee sabbaticals including (1) continuing employee education; (2) avoiding technical obsolescence; (3) reducing job-related stress and burnout; (4) creating a more productive work force; and (5) stemming the tide of early retirement. (JOW)

Modulated cortical control of individual fingers in experienced musicians: an EEG study. Electroencephalographic study.

PubMed

Slobounov, S; Chiang, H; Johnston, J; Ray, W

2002-12-01

The present research was designed to address the nature of interdependency between fingers during force production tasks in subjects with varying experience in performing independent finger manipulation. Specifically, behavioral and electroencephalographic (EEG) measures associated with controllability of the most enslaved (ring) and the least enslaved (index) fingers was examined in musicians and non-musicians. Six piano players and 6 age-matched control subjects performed a series of isometric force production tasks with the index and ring fingers. Subjects produced 3 different force levels with either their index or ring fingers. We measured the isometric force output produced by all 4 fingers (index, ring, middle and little), including both ramp and static phases of force production. We applied time-domain averaging of EEG single trials in order to extract 4 components of the movement-related cortical potentials (MRCP) preceding and accompanying force responses. Three behavioral findings were observed. First, musicians were more accurate than non-musicians at reaching the desired force level. Second, musicians showed less enslaving as compared to non-musicians. And third, the amount of enslaving increased with the increment of nominal force levels regardless of whether the index or ring finger was used as the master finger. In terms of EEG measures, we found differences between tasks performed with the index and ring fingers in non-musicians. For musicians, we found larger MRCP amplitudes at most electrode sites for the ring finger. Our data extends previous enslaving research and suggest an important role for previous experience in terms of the independent use of the fingers. Given that a variety of previous work has shown finger independence to be reflected in cortical representation in the brain and our findings of MRCP amplitude associated with greater independence of fingers in musicians, this suggests that what has been considered to be stable constraints in terms of finger movements can be modulated by experience. This work supports the idea that experience is associated with changes in behavioral and EEG correlates of task performance and may have clinical implications in disorders such as stroke or focal hand dystonia. Practice-related procedures offer useful approaches to rehabilitation strategies.

Displaced Workers: A Challenge for Voc Ed. Information Series No. 255.

ERIC Educational Resources Information Center

Clark, Donald M.

Worker displacement is a priority human resource issue that must be resolved to improve economic productivity, to further revitalize the American economy, and to cope with growing international competition. The work force and work place of the 1980s are undergoing changes that could result in ever larger scale joblessness. These changes include…

International Labour Standards and Technical Co-Operation: The Case of Special Public Works Programmes.

ERIC Educational Resources Information Center

Mayer, Jean

1989-01-01

Applies international labor standards to results of the International Labour Office's special public works programs to discover whether program intentions have been met. Finds that while productive employment has been pursued, popular participation is not occurring and such issues as (1) forced labor, (2) child employment, and (3) inequality of…

Financing Lifelong Learning for All: An International Perspective. Working Paper No. 46

ERIC Educational Resources Information Center

Burke, Gerald

2002-01-01

Improvements in lifelong learning are necessary for a range of overlapping reasons, including changing needs of the labour force in a globalised economy, the aging of the population in high-income countries and inequalities in education, work and income. Increased lifelong learning, for all, is important for productivity, but also to support…

Workplace Communication Skills, Workplace Basic Skills, & Literacy Training in UAW-Chrysler Region 3. Final Performance Report.

ERIC Educational Resources Information Center

Indiana Vocational Technical Coll., Indianapolis.

A workplace literacy partnership program model was demonstrated at four Chrysler plants in Indiana. Objectives were to improve workers' individual skills, enhance personal productivity, and increase work force job security and plant competitiveness. During the 3-month start-up phase, project staff worked with management and labor representatives…

The mechanical forces in katydid sound production

NASA Astrophysics Data System (ADS)

Xiao, Huaping; Chiu, Cheng-Wei; Zhou, Yan; He, Xingliang; Epstein, Ben; Liang, Hong

2013-10-01

Katydids and crickets generate their characteristic calling sound by rubbing their wings together. The mechanisms of the rubbing force, however, have not been extensively studied. The change of mechanical force with external parameters (speed and applied load) in the stridulation process has not been reported. Our current study aims to investigate the mechanical forces of katydid stridulation. Four pairs of files and plectrums from a katydid, which are responsible for the katydid's sound production, were examined with a specially designed experimental configuration. Due to the asymmetric nature of the wing motion in their opening and closing, the contact between the plectrum and file resembles that of a ratchet. Multiple frequencies were generated during experimental wing rubbing so that a calling-like sound was produced. Results showed that the morphology of the plectrum/file contact has significant effects on mechanical forces induced on the wings and resulting sound production. The roles of the mechanical forces include sound generation, tone modification, and energy consumption. The findings in this work reveal the variation trend of mechanical force with sliding speed and applied load. The frequency and amplitude of the sound wave produced in tribo-test are close to those in natural condition. By mimicking the microstructure of the plectrum and file teeth, acoustic instruments with high mechanical energy conversion rate can be developed. Our results provide new approaches in the design and improvement of micro-machines for acoustic applications, as well as in hybrid robotic systems.

Older adults' perceptions of work.

PubMed

Bambrick, Patricia; Bonder, Bette

2005-01-01

Traditional definitions of work may not reflect the activities of older adults. A broader definition that incorporates non-economic as well as economic measures may better describe their participation in the labor force and the meanings they ascribe to these activities. Because productive activity has been linked to successful aging, it is important to understand how elders perceive work. Twenty-six community-residing older adults were interviewed over a two-year period. Participants were mostly female and represented diverse cultural, religious and educational backgrounds. All these individuals participated in some activities they perceived as work. Three themes emerged as describing their attributions of meaning or importance to productive activities: contribution to self-concept, giving back to community, and staying engaged. Findings suggest that the productive activities of older adults contribute to quality of life for them and have implications for society as well.

Work climate and work load measurement in production room of Batik Merak Manis Laweyan

NASA Astrophysics Data System (ADS)

Suhardi, Bambang; Simanjutak, Sry Yohana; Laksono, Pringgo Widyo; Herjunowibowo, Dewanto

2017-11-01

The work environment is everything around the labours that can affect them in the exercise of duties and work that is charged. In a work environment, there are workplace climate and workload which affect the labour in force carrying out its work. The working climate is one of the physical factors that could potentially cause health problems towards labour at extreme conditions of hot and cold that exceed the threshold limit value allowed by the standards of health. The climate works closely related to the workload accepted by workers in the performance of their duties. The influence of workload is pretty dominant against the performance of human resources and may cause negative effects to the safety and health of the labours. This study aims to measure the effect of the work climate and the workload against workers productivity. Furthermore, some suggestions to increase the productivity also been recommended. The research conducted in production room of Batik Merak Manis Laweyan. The results showed that the workplace climate and the workload at eight stations in production room of Merak Manis does not agree to the threshold limit value that has been set. Therefore, it is recommended to add more opening windows to add air velocity inside the building thus the humidity and temperature might be reduced.

11th Annual Systems Engineering Conference

DTIC Science & Technology

2008-10-23

effectiveness for force structure architecture studies – Problem of interest was Layered Intelligence, Surveillance and Reconnaissance ( LISR ) with Integrated...Cleared for Public Release, Control No. 08-110, dtd. 10-1-0811 LISR CET Typical Products 1 Satellite_A; 1 Satellite_B; 3 VehA; 1 VehB (50%) 2 VehA; 3...the means to support LISR force structure architecture studies: Stand-alone and as a lead-in to detailed work Cleared for Public Release, Control No

Wire electric-discharge machining and other fabrication techniques

NASA Technical Reports Server (NTRS)

Morgan, W. H.

1983-01-01

Wire electric discharge machining and extrude honing were used to fabricate a two dimensional wing for cryogenic wind tunnel testing. Electric-discharge cutting is done with a moving wire electrode. The cut track is controlled by means of a punched-tape program and the cutting feed is regulated according to the progress of the work. Electric-discharge machining involves no contact with the work piece, and no mechanical force is exerted. Extrude hone is a process for honing finish-machined surfaces by the extrusion of an abrasive material (silly putty), which is forced through a restrictive fixture. The fabrication steps are described and production times are given.

Relaxation from particle production

DOE PAGES

Hook, Anson; Marques-Tavares, Gustavo

2016-12-20

Here, we consider using particle production as a friction force by which to implement a “Relaxion” solution to the electroweak hierarchy problem. Using this approach, we are able to avoid superplanckian field excursions and avoid any conflict with the strong CP problem. The relaxation mechanism can work before, during or after inflation allowing for inflationary dynamics to play an important role or to be completely decoupled.

New insights into the passive force enhancement in skeletal muscles.

PubMed

Lee, Eun-Jeong; Joumaa, Venus; Herzog, Walter

2007-01-01

The steady-state isometric force following active stretching of a muscle is always greater than the steady-state isometric force obtained in a purely isometric contraction at the same length. This phenomenon has been termed "residual force enhancement" and it is associated with an active and a passive component. The origin of these components remains a matter of scientific debate. The purpose of this work was to test the hypothesis that the passive component of the residual force enhancement is caused by a passive structural element. In order to achieve this purpose, single fibers (n=6) from the lumbrical muscles of frog (Rana pipiens) were isolated and attached to a force transducer and a motor that could produce computer-controlled length changes. The passive force enhancement was assessed for three experimental conditions: in a normal Ringer's solution, and after the addition of 5 and 15mM 2,3-butanedione monoxime (BDM) which inhibits force production in a dose-dependent manner. If our hypothesis was correct, one would expect the passive force enhancement to be unaffected following BDM application. However, we found that increasing concentrations of BDM decreased the isometric forces, increased the normalized residual force enhancement, and most importantly for this study, increased the passive force enhancement. Furthermore, BDM decreased the rate of force relaxation after deactivation following active stretching of fibers, passive stretching in the Ringer's and BDM conditions produced the same passive force-sarcomere length relationship, and passive force enhancement required activation and force production. These results led to the conclusion that the passive force enhancement cannot be caused by a structural component exclusively as had been assumed up to date, but must be associated, directly or indirectly, with cross-bridge attachments upon activation and the associated active force.

Labor-Force Participation, Policies & Practices in an Aging America: Adaptation Essential for a Healthy & Resilient Population

PubMed Central

Berkman, Lisa F.; Börsch-Supan, Axel; Avendano, Mauricio

2016-01-01

Population aging in the United States poses challenges to societal institutions while simultaneously creating opportunities to build a more resilient, successful, and cohesive society. Work organization and labor-force participation are central to both the opportunities and challenges posed by our aging society. We argue that expectations about old age have not sufficiently adapted to the reality of aging today. Our institutions need more adaptation in order to successfully face the consequences of demographic change. Although this adaptation needs to focus especially on work patterns among the “younger elderly,” our society has to change its general attitudes toward work organization and labor-force participation, which will have implications for education and health care. We also show that work’s beneficial effects on well-being in older ages are often neglected, while the idea that older workers displace younger workers is a misconception emerging from the “lump of labor” fallacy. We conclude, therefore, that working at older ages can lead to better quality of life for older people and to a more productive and resilient society overall. PMID:28042166

Shaping an Effective Parental-Leave Policy.

ERIC Educational Resources Information Center

Meiers, Margaret E.

1989-01-01

As increasing numbers of women and two-career couples enter the work force, parental leave provisions are becoming a routine business practice. Companies are beginning to recognize parental leave as a cost-effective strategy for retaining employees and maintaining productivity. (JOW)

76 FR 20305 - Consultative Group To Eliminate the Use of Child Labor and Forced Labor in Imported Agricultural...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

..., productivity, working conditions, and human resource management). iii. Could include positive incentives for... guarantees, access to financing, inclusion in national or country of origin trade promotion/registries, and...

Connecting Inner-City Youth to the World of Work. A Program Statement by the Committee for Economic Development.

ERIC Educational Resources Information Center

Committee for Economic Development, Washington, DC.

The United States should provide all young people entering the work force with opportunities to develop productive careers. Despite that fact, the nation's schools fail to equip many young people with appropriate skills, the job market often fails to link them to long-term advancement-oriented employment, and their communities often provide few…

The Competitiveness and Productivity of Tomorrow's Work Force: Compelling Reasons for Investing in Healthy Children.

ERIC Educational Resources Information Center

National Center for Education in Maternal and Child Health, Washington, DC.

This fact sheet outlines some demographic trends that are influencing the cost and availability of health care for children and making it increasingly necessary to take action to improve the health of the nation's children. In recent years children, as a group, are more likely to be poor, lack health insurance, have working mothers, receive…

Traction force microscopy of engineered cardiac tissues.

PubMed

Pasqualini, Francesco Silvio; Agarwal, Ashutosh; O'Connor, Blakely Bussie; Liu, Qihan; Sheehy, Sean P; Parker, Kevin Kit

2018-01-01

Cardiac tissue development and pathology have been shown to depend sensitively on microenvironmental mechanical factors, such as extracellular matrix stiffness, in both in vivo and in vitro systems. We present a novel quantitative approach to assess cardiac structure and function by extending the classical traction force microscopy technique to tissue-level preparations. Using this system, we investigated the relationship between contractile proficiency and metabolism in neonate rat ventricular myocytes (NRVM) cultured on gels with stiffness mimicking soft immature (1 kPa), normal healthy (13 kPa), and stiff diseased (90 kPa) cardiac microenvironments. We found that tissues engineered on the softest gels generated the least amount of stress and had the smallest work output. Conversely, cardiomyocytes in tissues engineered on healthy- and disease-mimicking gels generated significantly higher stresses, with the maximal contractile work measured in NRVM engineered on gels of normal stiffness. Interestingly, although tissues on soft gels exhibited poor stress generation and work production, their basal metabolic respiration rate was significantly more elevated than in other groups, suggesting a highly ineffective coupling between energy production and contractile work output. Our novel platform can thus be utilized to quantitatively assess the mechanotransduction pathways that initiate tissue-level structural and functional remodeling in response to substrate stiffness.

Power, muscular work, and external forces in cycling.

PubMed

de Groot, G; Welbergen, E; Clijsen, L; Clarijs, J; Cabri, J; Antonis, J

1994-01-01

Cycling performance is affected by the interaction of a number of variables, including environment, mechanical, and human factors. Engineers have focused on the development of more efficient bicycles. Kinesiologists have examined cycling performance from a human perspective. This paper summarizes only certain aspects of human ergonomics of cycling, especially those which are important for the recent current research in our departments. Power is a key to performance of physical work. During locomotion an imaginary flow of energy takes place from the metabolism to the environment, with some efficiency. The 'useful' mechanical muscle power output might be used to perform movements and to do work against the environment. The external power is defined as the sum of joint powers, each calculated as the product of the joint (net) moment and angular velocity. This definition of external power is closely related to the mean external power as applied to exercise physiology: the sum of joint powers reflects all mechanical power which in principle can be used to fulfil a certain task. In this paper, the flow of energy for cycling is traced quantitatively as far as possible. Studies on the total lower limb can give insight into the contribution of individual muscles to external power. The muscle velocity (positive or negative) is obtained from the positions and orientations of body segments and a bar linkage model of the lower limb. The muscle activity can be measured by electromyography. In this way, positive and negative work regions in individual muscles are identified. Synergy between active agonistic/antagonistic muscle groups occurs in order to deliver external power. Maximum power is influenced by body position, geometry of the bicycle and pedalling rate. This has to be interpreted in terms of the length-tension and force-velocity-power relationships of the involved muscles. Flat road and uphill cycling at different saddle-tube angles is simulated on an ergometer. The measured pedal forces (magnitude and direction) are only dependent on the intersegmental orientation of saddle tube, crank position, upper and lower leg, and foot. The changed direction of the gravitational force with respect to the saddle-tube does not interfere with the co-ordinated force production pattern. During locomotory cycling at constant speed the external power is mainly used to overcome the aerodynamic friction force. This force and the rolling resistance are determined by coasting down experiments, yielding the external power.(ABSTRACT TRUNCATED AT 400 WORDS)

Production and Optimization of Direct Coal Liquefaction derived Low Carbon-Footprint Transportation Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Markovich

This report summarizes works conducted under DOE Contract No. DE-FC26-05NT42448. The work scope was divided into two categories - (a) experimental program to pretreat and refine a coal derived syncrude sample to meet transportation fuels requirements; (b) system analysis of a commercial scale direct coal liquefaction facility. The coal syncrude was derived from a bituminous coal by Headwaters CTL, while the refining study was carried out under a subcontract to Axens North America. The system analysis included H{sub 2} production cost via six different options, conceptual process design, utilities requirements, CO{sub 2} emission and overall plant economy. As part ofmore » the system analysis, impact of various H{sub 2} production options was evaluated. For consistence the comparison was carried out using the DOE H2A model. However, assumptions in the model were updated using Headwaters database. Results of Tier 2 jet fuel specifications evaluation by the Fuels & Energy Branch, US Air Force Research Laboratory (AFRL/RZPF) located at Wright Patterson Air Force Base (Ohio) are also discussed in this report.« less

Mechanical efficiency and force–time curve variation during repetitive jumping in trained and untrained jumpers.

PubMed

McBride, Jeffrey M; Snyder, James G

2012-10-01

Mechanical efficiency (ME), the ratio between work performed and energy expenditure, is a useful criterion in determining the roles of stored elastic energy and chemically deduced energy contributing to concentric performance in stretch-shortening cycle movements. Increased force production during the eccentric phase has been shown to relate to optimal muscle-tendon unit (MTU) length change and thus optimization of usage of stored elastic energy. This phenomenon, as previously reported, is reflected by higher jump heights and ME. The purpose of this investigation was to determine if ME may be different between trained and untrained jumpers and thus be accounted for by variation in force production in the eccentric phase as a reflection of usage of stored elastic energy during various jump types. This investigation involved 9 trained (age 20.7 ± 3.2 years, height 178.6 ± 5.3 cm, body mass 79.0 ± 5.5 kg) and 7 untrained (age 21.43 ± 2.37 years, height 176.17 ± 10.89 cm, body mass 78.8 ± 12.5 kg) male jumpers. Trained subjects were Division I track and field athletes who compete in the horizontal or vertical jumping or running events. Force-time and displacement-time curves were obtained during jumping to determine jump height and to calculate work performed and to observe possible differences in force production in the eccentric phase. Respiratory gases with a metabolic cart were obtained during jumping to calculate energy expenditure. ME was calculated as the ratio between work performed and energy expenditure. The subjects completed four sessions involving 20 repetitions of countermovement jumps (CMJ) and drop jumps from 40 cm (DJ40), 60 cm (DJ60) and 80 cm (DJ80). The trained jumpers jumped significantly higher in the CMJ, DJ40, DJ60 and DJ80 conditions than their untrained counterparts (p ≤ 0.05). ME was significantly higher in the trained in comparison to the untrained jumpers during DJ40. The amount of negative work during all jump types was significantly greater in the trained jumpers. There was a significant correlation between negative work and ME in the trained jumpers (r = 0.82) but not in the untrained jumpers (r = 0.54). The present study indicates that trained jumpers jump higher and have greater ME, possibly as a result of increased for production in the eccentric phase as a reflection of optimal MTU length change and thus increased usage of storage of elastic energy.

Determination of thermodynamics and kinetics of RNA reactions by force

PubMed Central

Tinoco, Ignacio; Li, Pan T. X.; Bustamante, Carlos

2008-01-01

Single-molecule methods have made it possible to apply force to an individual RNA molecule. Two beads are attached to the RNA; one is on a micropipette, the other is in a laser trap. The force on the RNA and the distance between the beads are measured. Force can change the equilibrium and the rate of any reaction in which the product has a different extension from the reactant. This review describes use of laser tweezers to measure thermodynamics and kinetics of unfolding/refolding RNA. For a reversible reaction the work directly provides the free energy; for irreversible reactions the free energy is obtained from the distribution of work values. The rate constants for the folding and unfolding reactions can be measured by several methods. The effect of pulling rate on the distribution of force-unfolding values leads to rate constants for unfolding. Hopping of the RNA between folded and unfolded states at constant force provides both unfolding and folding rates. Force-jumps and force-drops, similar to the temperature jump method, provide direct measurement of reaction rates over a wide range of forces. The advantages of applying force and using single-molecule methods are discussed. These methods, for example, allow reactions to be studied in non-denaturing solvents at physiological temperatures; they also simplify analysis of kinetic mechanisms because only one intermediate at a time is present. Unfolding of RNA in biological cells by helicases, or ribosomes, has similarities to unfolding by force. PMID:17040613

Teaching Basic Skills for the Information Age.

ERIC Educational Resources Information Center

Jones, Barry O.

1986-01-01

The educational establishment should accommodate itself to society's historical shift from industrial production to increasingly service-oriented work functions. Broadening the educational experiences of the labor force to a lifetime approach of self-growth would be consistent with this societal transition. (CJH)

Automation Applications in an Advanced Air Traffic Management System : Volume 4A. Automation Requirements.

DOT National Transportation Integrated Search

1974-08-01

Volume 4 describes the automation requirements. A presentation of automation requirements is made for an advanced air traffic management system in terms of controller work force, computer resources, controller productivity, system manning, failure ef...

On-Site Construction Productivity Improvement Through Total Quality Management

DTIC Science & Technology

1991-12-01

morale of the work force. i Kaoru Ishikawa , Guide to Ouality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 45. ’"Ibid. 34...Curve Kaoru Ishikawa , Guide to Quality Control, (2d ed; New York: Asian Productivity Organization, 1982), p. 62. 54 For any normal distribution, 99.73...KAIZEN The Key to Japan’s Comoetitive Success. New York: Random House Business Division, 1986. Ishikawa , Kaoru , Guide to Ouality Control. 2d ed; New

Work and power analysis of the golf swing.

PubMed

Nesbit, Steven M; Serrano, Monika

2005-12-01

A work and power (energy) analysis of the golf swing is presented as a method for evaluating the mechanics of the golf swing. Two computer models were used to estimate the energy production, transfers, and conversions within the body and the golf club by employing standard methods of mechanics to calculate work of forces and torques, kinetic energies, strain energies, and power during the golf swing. A detailed model of the golf club determined the energy transfers and conversions within the club during the downswing. A full-body computer model of the golfer determined the internal work produced at the body joints during the downswing. Four diverse amateur subjects were analyzed and compared using these two models. The energy approach yielded new information on swing mechanics, determined the force and torque components that accelerated the club, illustrated which segments of the body produced work, determined the timing of internal work generation, measured swing efficiencies, calculated shaft energy storage and release, and proved that forces and range of motion were equally important in developing club head velocity. A more comprehensive description of the downswing emerged from information derived from an energy based analysis. Key PointsFull-Body Model of the golf swing.Energy analysis of the golf swing.Work of the body joints dDuring the golf swing.Comparisons of subject work and power characteristics.

Work and Power Analysis of the Golf Swing

PubMed Central

Nesbit, Steven M.; Serrano, Monika

2005-01-01

A work and power (energy) analysis of the golf swing is presented as a method for evaluating the mechanics of the golf swing. Two computer models were used to estimate the energy production, transfers, and conversions within the body and the golf club by employing standard methods of mechanics to calculate work of forces and torques, kinetic energies, strain energies, and power during the golf swing. A detailed model of the golf club determined the energy transfers and conversions within the club during the downswing. A full-body computer model of the golfer determined the internal work produced at the body joints during the downswing. Four diverse amateur subjects were analyzed and compared using these two models. The energy approach yielded new information on swing mechanics, determined the force and torque components that accelerated the club, illustrated which segments of the body produced work, determined the timing of internal work generation, measured swing efficiencies, calculated shaft energy storage and release, and proved that forces and range of motion were equally important in developing club head velocity. A more comprehensive description of the downswing emerged from information derived from an energy based analysis. Key Points Full-Body Model of the golf swing. Energy analysis of the golf swing. Work of the body joints dDuring the golf swing. Comparisons of subject work and power characteristics. PMID:24627666

How electronic health records can unmask the hidden value of PAs.

PubMed

Ogunfiditimi, Folusho; Sherry, Scott P; Foote, Monica; Christie, Sarah L; Shock, Lisa P; Cawley, James; Browne, Aaron

2017-06-01

The Fee for Value (FFV) Task Force, a subgroup of the American Academy of PAs' Research and Strategic Initiatives Commission, has examined tools and mechanisms aimed at better clarifying the volume and value of PA work and how that work contributes to improving access to high-quality care. Establishing the value of PAs has been a challenging task for many healthcare providers. Often, PA value has been defined by their clinical productivity, without any clear direction as to what constitutes value versus productivity. The objective of this article is to unmask the value of PAs through the role of electronic health records and highlight PAs' ability to produce services that are value-oriented and quantifiably productive.

Employee Assistance and Skills Enhancement. Project EASE II. Final Report. [Reporting Period: November 1, 1993-July 31, 1995].

ERIC Educational Resources Information Center

Reed, Tipawan Truong-Quang

Project Employment Assistance and Skill Enhancement (EASE II) was an on-the-job literacy and basic skills improvement project for employees of small companies in the metal working industry in the Chicago area. The goal of the project was to improve literacy skills, leading to the improvement of work force productivity targeted to disadvantaged…

Wage differentials among Appalachian sawmills

Treesearch

Charles H. Wolf

1977-01-01

Wage differences among Appalachian sawmills were investigated, using multiple-regression analysis. Wages and fringe benefits were found to vary with type of product sawed, education of the work force, distance to urban areas, general wage levels, and use of collective-bargaining agreements between management and labor.

A Cross-Disciplinary Partnership to Improve Manufacturing Education.

ERIC Educational Resources Information Center

Stephens, Matthew P.; Kraebber, Henry W.

1998-01-01

An exemplary university/business partnership involved the development of a training program to enhance workplace productivity for a relatively small manufacturing facility. The objectives were to educate the work force in the principles of workplace organization and lean manufacturing practices. (Author/JOW)

A Practical Framework Toward Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools.

PubMed

Akseli, Ilgaz; Xie, Jingjin; Schultz, Leon; Ladyzhynsky, Nadia; Bramante, Tommasina; He, Xiaorong; Deanne, Rich; Horspool, Keith R; Schwabe, Robert

2017-01-01

Enabling the paradigm of quality by design requires the ability to quantitatively correlate material properties and process variables to measureable product performance attributes. Conventional, quality-by-test methods for determining tablet breaking force and disintegration time usually involve destructive tests, which consume significant amount of time and labor and provide limited information. Recent advances in material characterization, statistical analysis, and machine learning have provided multiple tools that have the potential to develop nondestructive, fast, and accurate approaches in drug product development. In this work, a methodology to predict the breaking force and disintegration time of tablet formulations using nondestructive ultrasonics and machine learning tools was developed. The input variables to the model include intrinsic properties of formulation and extrinsic process variables influencing the tablet during manufacturing. The model has been applied to predict breaking force and disintegration time using small quantities of active pharmaceutical ingredient and prototype formulation designs. The novel approach presented is a step forward toward rational design of a robust drug product based on insight into the performance of common materials during formulation and process development. It may also help expedite drug product development timeline and reduce active pharmaceutical ingredient usage while improving efficiency of the overall process. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Structural, mechanical and myothermic properties of rabbit rectococcygeus muscle.

PubMed Central

Davey, D F; Gibbs, C L; McKirdy, H C

1975-01-01

1. The fine structure of rabbit rectococcygeus muscle has been studied with the electron microscope. 2. The mechanical performance and the heat production of this muscle has been investigated during tetanic contractions at 27 degrees C. 3. In isometric contractions a force of 164 +/- 27 mN/mm2 (mean +/- S.D., n = 17) is developed and the heat production is linearly related to the force. 4. There is a relationship between the duration of stimulation (t) and the total heat production (H) of the type H = A plus bt, where A and b are constants. 5. After-loaded isotonic experiments show that the relationship between force and velocity can be fitted by the 'characteristic equation' of Hill (1938). 6. The value of a/P0 (0-302 +/- 0-093, mean +/- S.D.) is slightly higher than in frog skeletal muscle but the constant b is about 50 times smaller. 7. The ratio of work/total energy production, for the stimulus conditions employed, was maximally 0-185. 8. The ratio of total enthalpy to initial enthalpy is difficult to measure accurately but is probably about 2. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Plate 2 PMID:1151809

Female labor force participation: an international perspective.

PubMed

Psacharopoulos, G; Tzannatos, Z

1989-07-01

This article gives an international perspective in regard to female participation in the labor force. In most countries women contribute less than men toward the value of recorded production. Social environment, statistical inconsistencies and methods of recording labor all contribute to this inequity. In Britain for instance, women caring for the household duties are in some studies considered to be part of the labor force and in other studies they are not. Further, internationally, women often find themselves in casual, temporary, or seasonal work that goes unrecorded. Defining what "labor force participation" constitutes is a key starting point to any survey. At what age is one considered employable? What constitutes a person "actively seeking" employment? Economists often try to explain labor force participation rate by age, sex, race and income groups and use this information to cite trends. The income-leisure model theorizes that choice of work or non-work by women is based primarily upon wages for work vs. wages for non-work. This theory sees non-labor income exerting a negative influence. Empirical evidence, however, suggests that women will choose work if wages are good regardless of any non-work benefits. Because most men are permanently in the labor force, estimates of labor reserves and projections of supply focus mostly on women. International generalizations are often misleading since trends vary widely among countries. During the last 20 years the global female participation rate has remained almost constant, but this is misleading. The percentage of working women in industrial countries increased 10%; developing countries showed a decrease of 7%. Female rates are often tied closely to shifts in the overall economy, (e.g., a transition from an agricultural to an industrial economy often sees a drop in female labor because subsistence jobs are lost). Of course the ability of women to bear children and the social expectations regarding child care often play a role. It is common in western industrialized countries to see drops in female participation during childbearing years. Countries with the lowest female participation rates are those with strong religious views about women in society, (e.g., Catholic and Muslim countries).

Prediction of Bubble Diameter at Detachment from a Wall Orifice in Liquid Cross Flow Under Reduced and Normal Gravity Conditions

NASA Technical Reports Server (NTRS)

Nahra, Henry K.; Kamotani, Y.

2003-01-01

Bubble formation and detachment is an integral part of the two-phase flow science. The objective of the present work is to theoretically investigate the effects of liquid cross-flow velocity, gas flow rate embodied in the momentum flux force, and orifice diameter on bubble formation in a wall-bubble injection configuration. A two-dimensional one-stage theoretical model based on a global force balance on the bubble evolving from a wall orifice in a cross liquid flow is presented in this work. In this model, relevant forces acting on the evolving bubble are expressed in terms of the bubble center of mass coordinates and solved simultaneously. Relevant forces in low gravity included the momentum flux, shear-lift, surface tension, drag and inertia forces. Under normal gravity conditions, the buoyancy force, which is dominant under such conditions, can be added to the force balance. Two detachment criteria were applicable depending on the gas to liquid momentum force ratio. For low ratios, the time when the bubble acceleration in the direction of the detachment angle is greater or equal to zero is calculated from the bubble x and y coordinates. This time is taken as the time at which all the detaching forces that are acting on the bubble are greater or equal to the attaching forces. For high gas to liquid momentum force ratios, the time at which the y coordinate less the bubble radius equals zero is calculated. The bubble diameter is evaluated at this time as the diameter at detachment from the fact that the bubble volume is simply given by the product of the gas flow rate and time elapsed. Comparison of the model s predictions was also made with predictions from a two-dimensional normal gravity model based on Kumar-Kuloor formulation and such a comparison is presented in this work.

Roles of production, consumption and trade in global and regional aerosol radiative forcing

NASA Astrophysics Data System (ADS)

Lin, J.; Tong, D.; Davis, S. J.; Ni, R.; Tan, X.; Pan, D.; Zhao, H.; Lu, Z.; Streets, D. G.; Feng, T.; Zhang, Q.; Yan, Y.; Hu, Y.; Li, J.; Liu, Z.; Jiang, X.; Geng, G.; He, K.; Huang, Y.; Guan, D.

2016-12-01

Anthropogenic aerosols exert strong radiative forcing on the climate system. Prevailing view regards aerosol radiative forcing as a result of emissions from regions' economic production, with China and other developing regions having the largest contributions to radiative forcing at present. However, economic production is driven by global demand for computation, and international trade allows for separation of regions consuming goods and services from regions where goods and related aerosol pollution are produced. It has recently been recognized that regions' consumption and trade have profoundly altered the spatial distribution of aerosol emissions and pollution. Building upon our previous work, this study quantifies for the first time the roles of trade and consumption in aerosol climate forcing attributed to different regions. We contrast the direct radiative forcing of aerosols related to regions' consumption of goods and services against the forcing due to emissions produced in each region. Aerosols assessed include black carbon, primary organic aerosol, and secondary inorganic aerosols including sulfate, nitrate and ammonium. We find that global aerosol radiative forcing due to emissions produced in East Asia is much stronger than the forcing related to goods and services ultimately consumed in that region because of its large net export of emissions-intensive goods. The opposite is true for net importers like Western Europe and North America: global radiative forcing related to consumption is much greater than the forcing due to emissions produced in these regions. Overall, trade is associated with a shift of radiative forcing from net importing to net exporting regions. Compared to greenhouse gases such as carbon dioxide, the short atmospheric lifetimes of aerosols cause large localized differences in radiative forcing. International efforts to reduce emissions in the exporting countries will help alleviate trade-related climate and health impacts of aerosols while lowering global emissions associated with global consumption. Ref: Lin et al., China's international trade and air pollution in the United States, PNAS, 2014 Lin et al., Global climate forcing of aerosols embodied in international trade, Nature Geoscience, 2016

Clamping characteristics study on different types of clamping unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiao, Zhiwei; Liu, Haichao; Xie, Pengcheng

2015-05-22

Plastic products are becoming more and more widely used in aerospace, IT, digital electronics and many other fields. With the development of technology, the requirement of product precision is getting higher and higher. However, type and working performance of clamping unit play a decisive role in product precision. Clamping characteristics of different types of clamping unit are discussed in this article, which use finite element numerical analysis method through the software ABAQUS to study the clamping uniformity, and detect the clamping force repeatability precision. The result shows that compared with toggled three-platen clamping unit, clamping characteristics of internal circulation two-platenmore » clamping unit are better, for instance, its mold cavity deformation and force that bars and mold parting surface suffered are more uniform, and its clamping uniformity and repeatability precision is also better.« less

Air Force Reusable Booster System A Quick-look, Design Focused Modeling and Cost Analysis Study

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2011-01-01

Presents work supporting the Air force Reusable Booster System (RBS) - A Cost Study with Goals as follows: Support US launch systems decision makers, esp. in regards to the research, technology and demonstration investments required for reusable systems to succeed. Encourage operable directions in Reusable Booster / Launch Vehicle Systems technology choices, system design and product and process developments. Perform a quick-look cost study, while developing a cost model for more refined future analysis.

Projections for Our Changing Workplace and Work Force: Implications for Business Educators.

ERIC Educational Resources Information Center

Olivas, Louis

1981-01-01

Discusses issues that will have significance for business educators in the coming decade. These include increased government regulation, productivity, improved sophisticated technology, the workplace, women, the economy, research and development, the individual, privacy and rights, and the intellectual life. (CT)

Mechanisms of force production during linear accelerations in bluegill sunfish Lepomis macrochirus

NASA Astrophysics Data System (ADS)

Tytell, Eric D.; Wise, Tyler N.; Boden, Alexandra L.; Sanders, Erin K.; Schwalbe, Margot A. B.

2016-11-01

In nature, fish rarely swim steadily. Although unsteady behaviors are common, we know little about how fish change their swimming kinematics for routine accelerations, and how these changes affect the fluid dynamic forces and the wake produced. To study force production during acceleration, particle image velocimetry was used to quantify the wake of bluegill sunfish Lepomis macrochirus and to estimate the pressure field during linear accelerations and steady swimming. We separated "steady" and "unsteady" trials and quantified the forward acceleration using inertial measurement units. Compared to steady sequences, unsteady sequences had larger accelerations and higher body amplitudes. The wake consisted of single vortices shed during each tail movement (a '2S' wake). The structure did not change during acceleration, but the circulation of the vortices increased, resulting in larger forces. A fish swimming unsteadily produced significantly more force than the same fish swimming steadily, even when the accelerations were the same. This increase is likely due to increased added mass during unsteady swimming, as a result of the larger body amplitude. Pressure estimates suggest that the increase in force is correlated with more low pressure regions on the anterior body. This work was supported by ARO W911NF-14-1-0494 and NSF RCN-PLS 1062052.

A new approach to evaluating the well-being of police.

PubMed

Juniper, B; White, N; Bellamy, P

2010-10-01

There is a growing body of evidence that links employee well-being to organizational performance. Although police forces are under increasing pressure to improve efficiency and productivity, the evaluation of well-being in law enforcement is mostly restricted to self-report stress questionnaires that are based on questionable construction methodologies. No instrument to specifically determine the well-being of police force employees currently exists. To construct an instrument that measures the work-related well-being of officers and staff within a police force. The approach is drawn from well-established clinical models used to evaluate the well-being of patients. Potential variables were confirmed using an item selection method known as impact analysis that places keen emphasis on frequency and importance as perceived by the respondents themselves. Analyses of 822 completed response sets showed that nine separate dimensions of police work can adversely affect well-being (advancement, facilities, home work interface, job, physical health, psychological health, relationships, organizational and workload). Overall, officers showed inferior well-being compared with their colleagues. Content validity and adequate internal reliability were confirmed. This study considered a new robust approach to evaluating the well-being of all those working in law enforcement. The nine dimensions extended beyond conventional stress measures and may offer a practical alternative way of assessing the overall well-being status of an entire force using a systematic item selection framework.

[Demographic pressure, "informal sector" and technological choices in Third World countries].

PubMed

Hugon, P

1983-01-01

Trisectorial models of economic functioning have been proposed to replace the dualistic models that proved incapable of illuminating postwar employment trends in developing countries. The new models propose 3 sectors: the subsistence sector, where average productivity corresponds to the subsistence minimum and which is thus incapable of generating a surplus for savings; the intermediate sector, weakly capitalistic, characterized by the absence of a permanent salaried work force or codified labor relations, in which precariousness of employment and the exploitation of specific social relations allow a low wage rate, with a concommitant mode of regulation that largely escapes state control; and the intensely capitalistic sector, with a salaried work force, codified labor relations, existence of administered prices, various state subventions and protections and a monopolistic type of regulation. The 3 sectors are described in greater detail and represented graphically, along with a critique of the limitations of most studies employing a trisectorial perspective. A study of the impact of demographic pressure at different levels of technology embedded in specific sociohistoric systems follows. The final section contains an analysis of 3 types of effects which may mediate the role of demographic pressure in the choice of technologies: effects of demographic pressure on structures of production and consumption, on segments of the labor force, and on involutive and evolutive processes. It is argued that the links between demographic pressure, technologic choices, and the productive sector can only be analyzed in specific social systems.

Validation of the North American Land Data Assimilation System (NLDAS) retrospective forcing over the southern Great Plains

NASA Astrophysics Data System (ADS)

Luo, Lifeng; Robock, Alan; Mitchell, Kenneth E.; Houser, Paul R.; Wood, Eric F.; Schaake, John C.; Lohmann, Dag; Cosgrove, Brian; Wen, Fenghua; Sheffield, Justin; Duan, Qingyun; Higgins, R. Wayne; Pinker, Rachel T.; Tarpley, J. Dan

2003-11-01

Atmospheric forcing used by land surface models is a critical component of the North American Land Data Assimilation System (NLDAS) and its quality crucially affects the final product of NLDAS and our work on model improvement. A three-year (September 1996-September 1999) retrospective forcing data set was created from the Eta Data Assimilation System and observations and used to run the NLDAS land surface models for this period. We compared gridded NLDAS forcing with station observations obtained from networks including the Oklahoma Mesonet and Atmospheric Radiation Measurement/Cloud and Radiation Testbed at the southern Great Plains. Differences in all forcing variables except precipitation between the NLDAS forcing data set and station observations are small at all timescales. While precipitation data do not agree very well at an hourly timescale, they do agree better at longer timescales because of the way NLDAS precipitation forcing is generated. A small high bias in downward solar radiation and a low bias in downward longwave radiation exist in the retrospective forcing. To investigate the impact of these differences on land surface modeling we compared two sets of model simulations, one forced by the standard NLDAS product and one with station-observed meteorology. The differences in the resulting simulations of soil moisture and soil temperature for each model were small, much smaller than the differences between the models and between the models and observations. This indicates that NLDAS retrospective forcing provides an excellent state-of-the-art data set for land surface modeling, at least over the southern Great Plains region.

Juggling work and elder caregiving: work-life balance for aging American workers.

PubMed

Pitsenberger, D Jeanne

2006-04-01

As the American work force ages, the demands of caring for aging relatives increase. Family caregiving often interferes with workplace responsibilities, creating physical, emotional, and financial stress for caregivers. Employers must address the productivity losses created by absenteeism of workers who struggle with work-life issues created by caregiving roles. Occupational health nurses must understand the factors that affect workers in their caregiving roles and make appropriate nursing interventions. They are in key positions to help aging employees and their employers face the increased demands on work-life balance created by elder caregiving.

Resistive thrust production can be as crucial as added mass mechanisms for inertial undulatory swimmers

NASA Astrophysics Data System (ADS)

Piñeirua, M.; Godoy-Diana, R.; Thiria, B.

2015-08-01

In this Rapid Communication, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the resistive swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number, and the reactive swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.

Tunisia.

PubMed

1987-02-01

In 1986, Tunisia's population was 7,424,000, with an annual growth rate of 2.5%. The infant mortality rate was 90/1000 and life expectancy averages 58 years. The work force of 1,810,000 is distributed as follows: agriculture, 30.5%; manufacturing, 16.5%; services, 15.0%; construction and mining, 11.4%; and other, 26.6%. The gross domestic product was US$8.35 billion in 1985, with a per capita income (1986) of $1163. The Destourian Socialist Party has been the governing party in Tunisia since independence. Tunisia is a leader in the Arab world in the promotion of equal status for women under the law and the government supports an active family planning program. Tunisia's economy depends on oil, agriculture, phosphates, worker remittances, and tourism for economic growth. In response to an economic crisis in 1985-86, measures to restructure the economy were instituted, including basic commodity price increases, limits on wage increases, import liberalization, and price control modifications. Unemployment, aggravated by a rapidly growing work force, is a major problem in Tunisia. An estimated 50% of the potential work force is unemployed or underemployed.

The principles of quality-associated costing: derivation from clinical transfusion practice.

PubMed

Trenchard, P M; Dixon, R

1997-01-01

As clinical transfusion practice works towards achieving cost-effectiveness, prescribers of blood and its derivatives must be certain that the prices of such products are based on real manufacturing costs and not market forces. Using clinical cost-benefit analysis as the context for the costing and pricing of blood products, this article identifies the following two principles: (1) the product price must equal the product cost (the "price = cost" rule) and (2) the product cost must equal the real cost of product manufacture. In addition, the article describes a new method of blood product costing, quality-associated costing (QAC), that will enable valid cost-benefit analysis of blood products.

Restructuring the System Is the Solution.

ERIC Educational Resources Information Center

Perelman, Lewis J.

1988-01-01

For the U.S. to survive despite intensifying international competition, accelerating technological change, oppressive public and private debt, and demographic and work force changes, the learning enterprise must become far more productive. Two 1998 scenarios are presented: business-as-usual (favoring the rich) and a restructured system based on…

The basic instrument for the study of China's population and employment: the labor life table.

PubMed

Jiang, Z

1991-01-01

The data and methods are provided for generating a labor life table for China in 1988. The purpose is to supply a useful instrument for studying, planning, and analyzing employment and social services, welfare programs, and insurance. These tables were constructed using age- and sex-specific employment data from the 1% sample of demographic data for 1987 in 13 nonfarming sectors. Employment was derived from the 1985 Industrial Survey on 2 sectors of the nonfarming population. Urban employment and rural agricultural employment were not calculated because of the imprecision of the data. The age structure has unique characteristic differences between the employment rate curves of the material and nonmaterial production sectors. The peak for the nonmaterial production sector is near 50 years for men and 44 years for women, while the curve for the material sector is more nearly bell-shaped with a peak for females at 20-30 years. The female employment pattern indicates that women continue working after the birth of a child, and women do not return to the work force once they resign. The reasons for the pattern in nonmaterial production are indicated. The method used to calculate the labor life table employs the same methods as the multiple life table approach for mortality, with some modifications. The assumption is a static labor population between the ages of 15-70 years. The age for which employment is the highest is selected; then the number of people employed is generated. Employment beyond the peak age is derived through the % of the labor force in the total population. The arithmetic mean value of the labor force for adjacent age groups is determined by survivors until a particular age. Mean work expectancy years and age-specific cumulative labor force are calculated per the life table method. As data become available, causes of death of the labor force and transfer of labor between sectors and regions may be computed. An example of retirement information is that 60-year old workers receive their pensions for an average number of years following retirement of 17.8-3.33 give or take 14 years. The data provided in this article are also available from the 1990 Yearbook of the Chinese Populations.

Naval Procurement Problems: Theory and Practice

DTIC Science & Technology

1982-01-01

contrast when construction is contracted for the product may be modified before delivery and new information of relevance to both parties may be learned en...defense policy which may be desirable. For example, what price are we willing to pay for flexibility and surge capacity is a defense policy question...work force by an order of magnitude and achieve the productivity used as a basis for contract pricing was a primary factor in the schedule slippage

Investment in Learning: An Assessment of the Economic Return.

ERIC Educational Resources Information Center

Rasell, M. Edith; Appelbaum, Eileen

Past investments in the U.S. work force--early childhood interventions, formal education, and training--have improved productivity and made important contributions both to the wages of individuals and to the growth of the economy. Excellent, comprehensive prenatal care, good nutrition, medical care, and intensive early childhood education programs…

Getting Results through Learning.

ERIC Educational Resources Information Center

Human Resource Development Council, Washington, DC.

This handbook, which was developed for federal managers, explains how low-cost and no-cost training methods developed in the private sector and the services and support available from federal human resource development (HRD) offices can be used to build a smarter and more productive work force. Presented in part 1 are the following: seven…

Attitude: A Component of Competent Performance.

ERIC Educational Resources Information Center

Meussling, Vonne

The findings of a survey of attitude studies to determine the effect of students' attitudes on communication competence as they enter the work force and develop their careers are reported in this paper. The paper explains how attitude improvement is an effective management tool in controlling costly absenteeism, output, job productivity, work…

Understanding the New Job-Analysis Technology.

ERIC Educational Resources Information Center

Aho, Kaye L.

1989-01-01

The author examines such trends as rapid job change, organizational decentralization, the need for increased productivity, legal challenges, and changing work force needs; the evolving job-analysis technology; and the potential impact of this technology on human resources professionals. She also summarizes the key features to look for in a…

77 FR 39519 - Records Schedules; Availability and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... compiled from various sources to track and monitor the effects of past nuclear tests on Armed Forces personnel. 3. Department of Energy, Federal Energy Regulatory Commission (N1- 138-12-2, 1 temporary item... temporary item). Project files, including working papers relating to product reports. 7. Department of Labor...

Hours of Boredom, Moments of Terror: Temporal Desynchrony in Military and Security Force Operations

DTIC Science & Technology

2010-10-01

Administrative Science Quarterly 24 (1979), 285–306. 31 Robert A. Karasek and Tores Theorell , Healthy Work: Stress, Productivity and the...first symptoms of incipient failure. 30 Robert A. Karasek , “Job Demands, Job Decision Latitude and Mental Strain: Implications for Job Redesign

FAA Aviation Forecasts - Fiscal Years 1987-1998.

DTIC Science & Technology

1987-02-01

production of turbine powered aircraft. Further, a majority of the companies have significantly reduced their work forces and have consolidated plants . The...Hernando, Hillsborough, Pasco, and Pinellas . The hub’s 1985 population was 1.9 million. By 2000, the hub is expected to reach 2.4 mil- lion, which is 28

The Information Society: Fact or Charming Mythology?

ERIC Educational Resources Information Center

Ledingham, John A.

Today the majority of the United States work force is employed in the production, processing, and dissemination of information. However, the situation with regard to videotex, the medium that served as the basis for predicting an information society, is far from settled. The statistics concerning videotex are impressive, the technology…

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Ares I-X Range Safety Analyses Overview

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Gowan, John W., Jr.; Thompson, Brian G.; Tarpley, Ashley W.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Trial-by-fire transformation: an interview with Globe Metallurgical's Arden C. Sims. Interview by Bruce Rayner.

PubMed

Sims, A C

1992-01-01

Globe Metallurgical Inc., a $115 million supplier of specialty metals, is best known as the first small company to win the Baldrige Award in 1988. But there is much more to this gutsy little company than total quality. During the 1980s, Globe transformed itself from a rust-belt has-been on the verge of bankruptcy into a high-technology, high-quality industry leader. Along the way, the company went private in a management-led leveraged buyout, embraced flexible work teams, adopted a high-value-added, niche marketing strategy, and took its business global. Leading the way in Globe's reinvention was Chief Executive Arden C. Sims, the slow-talking son of a West Virginian coal miner. When he joined the company in 1984, Sims had no experience in the new managerial techniques. He was a product of the old school of management: cut costs and trim operations to regain competitiveness. But he soon discovered that old-style management was not enough to battle offshore competitors, an unproductive work force, rising costs, and outdated production technology. He was forced to go looking for new ideas and practices. In a succession of learning experiences, Sims attended a seminar on total quality in 1985, paving the way for the company's quality program; he discovered the power of flexible work teams when management was forced to run the furnaces during a year-long strike; he organized an LBO, allowing him to change the work order even more dramatically; and he took the company global and into highly profitable niche markets by severing a long-standing relationship with Globe's sales and marketing representative. As a result of these and other changes, Globe leads the specialty metals industry in virtually all performance measures.

Why High School Students Learn So Little and What Can Be Done about It. Testimony, Subcommittee on Education and Health, U.S. Congress, October 1, 1987. Working Paper #88-01.

ERIC Educational Resources Information Center

Bishop, John

The testimony presented in this document outlines the productivity lag between the needs of companies and the students who will enter the work force that is evident today within the United States. Manufacturing companies are having difficulty as they try to introduce flexible manufacturing technology. A lack of skill in communication, mathematics,…

Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator.

PubMed

Aminzahed, Iman; Mashhadi, Mahmoud Mosavi; Sereshk, Mohammad Reza Vaziri

2017-02-01

Micro forming is a manufacturing process to fabricate micro parts with high quality and a cost effective manner. Deep drawing could be a favorable method for production of complicated parts in macro and micro sizes. In this paper piezoelectric actuator is used as a novel approach in the field of micro manufacturing. Also, in current work, investigations are conducted with four rectangular punches and blanks with various thicknesses. Blank holder pressure effects on thickness distributions, punch force, and springback are studied. According to the results of this work, increasing of blank holder pressure in scaled deep drawing, in contrast to thickness of drawn part, leads to decrease in the punch forces and springback. Furthermore, it is shown that in micro deep drawing, the effects of holder pressure on mentioned parameters can be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

Productivity losses associated with diabetes in the US.

PubMed

Ng, Y C; Jacobs, P; Johnson, J A

2001-02-01

The objective of this study was to estimate the cost of productivity losses in the U.S. attributable to diabetes, with regard to specific demographic and disease-related characteristics in the U.S.. We used the 1989 National Health Interview Survey, a random survey of individuals in the U.S. that included a diabetes supplement. Data on individuals were obtained for labor force participation, hours of work, demographic and occupational characteristics, self-reported health status, and several variables that indicated the presence, duration, and severity (complications) of diabetes. Using multivariate regression analyses, we estimated the association of independent variables (e.g., demographics, health, and diabetes status) with labor force participation, hours of work lost, and the economic value of lost work attributable to diabetes and its complications and duration. In general, the presence of diabetes and complications were found to be related to workforce participation variables. The magnitude of the lost-productivity costs depended on personal characteristics and on the presence and status of diabetes. In general, the loss of yearly earnings amounted to about a one-third reduction in earnings and ranged from $3,700 to $8,700 per annum. Diabetes has a considerable net effect on earnings, and the complications and duration of diabetes have compound effects. Our findings have implications for the cost-effectiveness of diabetes control; the presence of complicating factors is the single most important predictive factor in lost productivity costs attributable to diabetes, and thus the avoidance or retardation of complications will have an impact on indirect health-related costs.

Increasing older persons' employment in Finland: in search of a new strategy.

PubMed

Sihto, M

1999-01-01

Using Finland as a case study, it is argued that early retirement will probably no longer be used on a large scale to reduce older-worker labor-force participation and unemployment among older workers. Instead, new strategies are needed to enhance the ability of older workers to remain productive and in the labor force, and to facilitate the reintegration of unemployed older persons back into working life. Both tasks require massive pioneering efforts. Reducing unemployment rates among older workers, particularly, requires completely new kinds of labor-market measures.

Arthritis-related work transitions: a prospective analysis of reported productivity losses, work changes, and leaving the labor force.

PubMed

Gignac, Monique A M; Cao, Xingshan; Lacaille, Diane; Anis, Aslam H; Badley, Elizabeth M

2008-12-15

To prospectively examine arthritis-related productivity losses, work changes, and leaving employment, the relationships among these work transitions, and the factors associated with them. Participants with inflammatory arthritis or osteoarthritis were interviewed at 4 time points, 18 months apart, using a structured questionnaire. At baseline (T1), all participants (n = 490; 381 women, 109 men) were employed. At T2, T3, and T4, the sample decreased to 413, 372, and 349 participants, respectively. Respondents were recruited using community advertising and from rheumatology and rehabilitation clinics. Work transitions considered were productivity losses (absenteeism, job disruptions), work changes (reduced hours, changing jobs), and leaving employment. Also measured were demographic, illness, work context, and psychological variables. Generalized estimation equations modeled predictors of work transitions over time. Although 63.1% of respondents remained employed throughout the study, work transitions were common (reported by 76.5% of participants). Productivity losses, especially job disruptions such as being unable to take on extra work, were the most frequently reported. Work transitions were related to subsequently making other work transitions, including leaving employment. Age, sex, education, activity limitations, control, depression, and arthritis-work spillover were also associated with work transitions. This study sheds light on a process of diverse employment changes that may occur in the lives of many individuals with arthritis. It emphasizes the interrelationships among work transitions, as well as other factors in predicting work transitions, and it provides insight into work changes that may signal impending difficulties with remaining employed.

Labor-Management Cooperation in Illinois: How a Joint Union Company Team Is Improving Facility Safety.

PubMed

Mahan, Bruce; Maclin, Reggie; Ruttenberg, Ruth; Mundy, Keith; Frazee, Tom; Schwartzkopf, Randy; Morawetz, John

2018-01-01

This study of Afton Chemical Corporation's Sauget facility and its International Chemical Workers Union Council (ICWUC) Local 871C demonstrates how significant safety improvements can be made when committed leadership from both management and union work together, build trust, train the entire work force in U.S. Occupational Safety and Health Administration 10-hour classes, and communicate with their work force, both salaried and hourly. A key finding is that listening to the workers closest to production can lead to solutions, many of them more cost-efficient than top-down decision-making. Another is that making safety and health an authentic value is hard work, requiring time, money, and commitment. Third, union and management must both have leadership willing to take chances and learn to trust one another. Fourth, training must be for everyone and ongoing. Finally, health and safety improvements require dedicated funding. The result was resolution of more than one hundred safety concerns and an ongoing institutionalized process for continuing improvement.

Chronic disease and labour force participation among older Australians.

PubMed

Schofield, Deborah J; Shrestha, Rupendra N; Passey, Megan E; Earnest, Arul; Fletcher, Susan L

2008-10-20

To examine the association between long-term health conditions and being out of the labour force among older Australians. Retrospective analysis of cross-sectional data from the Australian Bureau of Statistics 2003 Survey of Disability, Ageing and Carers for people aged 45-64 years. Rates of premature retirement associated with ill health; odds ratios of being out of the labour force associated with each long-term health condition and number of conditions; weighted population estimates; estimates of gross domestic product lost as a result. 9198 people surveyed were aged 45-64 years, 3010 of whom were not in the labour force. Of these, 1373 (45.6%) had retired because of a chronic health condition, most commonly a back problem (10.4%), or arthritis and related disorders (8.6%). When adjusted for age and sex, all conditions studied except diseases of the ear and mastoid process, other endocrine/nutritional and metabolic disorders, noise-induced deafness or hearing loss, and high cholesterol were significantly associated with being out of the labour force. Extrapolating from these results, an estimated 663 235 older Australians were not working because of ill health, reducing Australia's gross domestic product by around $14.7 billion per annum. Prevention of long-term health conditions may help older Australians remain in the labour force longer, thereby increasing revenue to fund health care for the ageing population.

Effects of oncoming target velocities on rapid force production and accuracy of force production intensity and timing.

PubMed

Ohta, Yoichi

2017-12-01

The present study aimed to clarify the effects of oncoming target velocities on the ability of rapid force production and accuracy and variability of simultaneous control of both force production intensity and timing. Twenty male participants (age: 21.0 ± 1.4 years) performed rapid gripping with a handgrip dynamometer to coincide with the arrival of an oncoming target by using a horizontal electronic trackway. The oncoming target velocities were 4, 8, and 12 m · s -1 , which were randomly produced. The grip force required was 30% of the maximal voluntary contraction. Although the peak force (Pf) and rate of force development (RFD) increased with increasing target velocity, the value of the RFD to Pf ratio was constant across the 3 target velocities. The accuracy of both force production intensity and timing decreased at higher target velocities. Moreover, the intrapersonal variability in temporal parameters was lower in the fast target velocity condition, but constant variability in 3 target velocities was observed in force intensity parameters. These results suggest that oncoming target velocity does not intrinsically affect the ability for rapid force production. However, the oncoming target velocity affects accuracy and variability of force production intensity and timing during rapid force production.

The cost of lost productivity due to fetal alcohol spectrum disorder-related premature mortality.

PubMed

Easton, Brian; Burd, Larry; Sarnocinska-Hart, Anna; Rehm, Jürgem; Popova, Svetlana

2015-01-01

Individuals with Fetal Alcohol Spectrum Disorder (FASD) have increased mortality as compared to the general population. To estimate the productivity losses due to premature mortality of individuals with FASD in Canada in 2011. A demographic approach with a counterfactual scenario in which nobody in Canada is born with FASD was used. Population estimates were calculated using data on the labour force, unemployment rate, and average weekly wage obtained from Statistics Canada. The number of FASD-related deaths, coded in the International Classification of Diseases, version 10, was estimated based on data from Statistics Canada and pooled prevalence estimates of the major disease conditions associated with FASD were obtained from a meta-analysis. The estimates of FASD-related mortality rates served as a basis for the length of working life span estimation. Once the number of working years lost to premature deaths was derived, productivity losses were computed. It was estimated that in total 327 individuals with FASD aged 20 to 69 (almost twice as many men as women) died in Canada in 2011. As a result, there were 2,877 years of potential employment lost, which translated to a loss ranging from $88 million to $126 million. This amount represents the increase in national income, had there been no premature mortality from FASD and the workers with FASD had been typical members of the labour force (without compromised productivity due to FASD). The estimates of productivity losses further reinforce the value of FASD prevention as a primary strategy.

A Stationary One-Equation Turbulent Model with Applications in Porous Media

NASA Astrophysics Data System (ADS)

de Oliveira, H. B.; Paiva, A.

2018-06-01

A one-equation turbulent model is studied in this work in the steady-state and with homogeneous Dirichlet boundary conditions. The considered problem generalizes two distinct approaches that are being used with success in the applications to model different flows through porous media. The novelty of the problem relies on the consideration of the classical Navier-Stokes equations with a feedback forces field, whose presence in the momentum equation will affect the equation for the turbulent kinetic energy (TKE) with a new term that is known as the production and represents the rate at which TKE is transferred from the mean flow to the turbulence. By assuming suitable growth conditions on the feedback forces field and on the function that describes the rate of dissipation of the TKE, as well as on the production term, we will prove the existence of the velocity field and of the TKE. The proof of their uniqueness is made by assuming monotonicity conditions on the feedback forces field and on the turbulent dissipation function, together with a condition of Lipschitz continuity on the production term. The existence of a unique pressure, will follow by the application of a standard version of de Rham's lemma.

The interrelation between mechanical characteristics of contracting muscle, cross-bridge internal structure, and the mechanism of chemomechanical energy transduction.

PubMed

Rosenfeld, E V

2012-09-01

The cross-bridge working stroke is regarded as a continuous (without jumps) change of myosin head internal state under the action of a force exerted within the nucleotide-binding site. Involvement of a concept of continuous cross-bridge conformation enables discussion of the nature of the force propelling muscle, and the Coulomb repulsion of like-charged adenosine triphosphate (ATP) fragments ADP(2-) and P (i) (2-) can quite naturally be considered as the source of this force. Two entirely different types of working stroke termination are considered. Along with the fluctuation mechanism, which controls the working stroke duration t (w) at isometric contraction, another interrupt mechanism is initially taken into account. It is triggered when the lever arm shift amounts to the maximal value S ≈ 11 nm, the back door opens, and P(i) crashes out. As a result, t (w) becomes inversely proportional to the velocity v of sliding filaments t (w) ≈ S/v for a wide range of values of v. Principal features of the experimentally observed dependences of force, efficiency, and rate of heat production on velocity and ATP concentration can then be reproduced by fitting a single parameter: the velocity-independent time span t (r) between the termination of the last and beginning of the next working stroke. v becomes the principal variable of the model, and the muscle force changes under external load are determined by variations in v rather than in the tension of filaments. The Boltzmann equation for an ensemble of cross-bridges is obtained, and some collective effects are discussed.

Discrimination in the Pakistan labour market: myth and reality.

PubMed

Mohiuddin, Y

1991-01-01

This paper examines what author calls a fundamental form of sex discrimination in Pakistan: the fact that women's extensive participation in the labor force is ignored by economic planners. While wage and job discrimination are the most common forms of sex discrimination in Europe and North America, in Pakistan sex discrimination revolves around the divergence between the myth that women do not work and the reality that women's labor force participation is high. Because of the myth that women do not work, women are overlooked by the same planning process that could serve to enhance their productivity. The paper is divided into 5 sections: 1) the introduction; 2) an examination of the myth concerning women's labor force participation and its underlying reasons; 3) an analysis of the extent of women's participation in the labor force in rural and urban settings; 4) a discussion of the extent of wage and occupational discrimination in Pakistan; and 5) a discussion of the policy implications. While official figures calculate the labor force activity of rural women and urban women to be between 3%-10.7% and 3.5%-4.7%, respectively, the author explains that the figures are closer to 55% and 25% (and this does not include women's participation in the informal sector). The author identifies 4 reasons that perpetuate the myth that women do not work: 1) women are physically hidden from view, a seclusion institutionalized by the practice of purdah (the veil); 2) the middle-class ideal of a nonworking wife; 3) the perception that only paid labor counts as work; and 4) the failure of statistics to capture the true extent of women's participation.

Control of thumb force using surface functional electrical stimulation and muscle load sharing

PubMed Central

2013-01-01

Background Stroke survivors often have difficulties in manipulating objects with their affected hand. Thumb control plays an important role in object manipulation. Surface functional electrical stimulation (FES) can assist movement. We aim to control the 2D thumb force by predicting the sum of individual muscle forces, described by a sigmoidal muscle recruitment curve and a single force direction. Methods Five able bodied subjects and five stroke subjects were strapped in a custom built setup. The forces perpendicular to the thumb in response to FES applied to three thumb muscles were measured. We evaluated the feasibility of using recruitment curve based force vector maps in predicting output forces. In addition, we developed a closed loop force controller. Load sharing between the three muscles was used to solve the redundancy problem having three actuators to control forces in two dimensions. The thumb force was controlled towards target forces of 0.5 N and 1.0 N in multiple directions within the individual’s thumb work space. Hereby, the possibilities to use these force vector maps and the load sharing approach in feed forward and feedback force control were explored. Results The force vector prediction of the obtained model had small RMS errors with respect to the actual measured force vectors (0.22±0.17 N for the healthy subjects; 0.17±0.13 N for the stroke subjects). The stroke subjects showed a limited work range due to limited force production of the individual muscles. Performance of feed forward control without feedback, was better in healthy subjects than in stroke subjects. However, when feedback control was added performances were similar between the two groups. Feedback force control lead, especially for the stroke subjects, to a reduction in stationary errors, which improved performance. Conclusions Thumb muscle responses to FES can be described by a single force direction and a sigmoidal recruitment curve. Force in desired direction can be generated through load sharing among redundant muscles. The force vector maps are subject specific and also suitable in feedforward and feedback control taking the individual’s available workspace into account. With feedback, more accurate control of muscle force can be achieved. PMID:24103414

Effect of unilateral knee extensor fatigue on force and balance of the contralateral limb.

PubMed

Arora, Shruti; Budden, Shawn; Byrne, Jeannette M; Behm, David G

2015-10-01

Fatigue in one limb can decrease force production in the homologous muscle as well as other muscles of the non-fatigued limb affecting balance. The objective of the study was to examine the effect of unilateral knee extensor fatigue on the non-fatigued limb's standing balance, muscle force and activation. Sixteen healthy male subjects performed pre-fatigue balance trials, warm-up exercises, maximum voluntary isometric contractions, a knee extensors fatigue protocol, and post-fatigue balance trials. The fatigue protocol consisted of sets of 15 consecutive isometric contractions of 16 s each with 4 s recovery between repetitions, which were performed at 30% peak force for the dominant knee extensor muscles. Additional sets of contractions continued until a 50% decrease in MVIC knee extensor force was observed. Pre- and post-fatigue balance assessment consisted of transition from double to single leg standing and also single leg standing trials, which were performed bilaterally and in randomized order. The peak force and F100 were significantly decreased by 44.8% (ES = 2.54) and 39.9% (ES = 0.59), respectively, for the fatigued limb post-fatigue. There were no significant changes in the non-fatigued limb's muscle force, activation, muscle onset timing or postural stability parameters. While the lack of change in non-fatigued limb force production is in agreement with some of the previous literature in this area, the lack of effect on postural measures directly contradicts earlier work. It is hypothesized that discrepancies in the duration and the intensity of the fatigue protocol may have accounted for this discrepancy.

Daily Magnetograms for 1978 from the AFGL (Air Force Geophysics Laboratory) Network.

DTIC Science & Technology

1985-01-08

school student , carried out much of the computer work that produced the edited data shown in these plots and who lost his life in October 1982 while...dedicated efforts of a group of college and high-school students . Armand Paboojian supervised and personally undertook much of the production of the...F. IDevane. S.I., directed the contractual effort of Boston College under which most of the students worked. Ri" Laperriere carried out a large

Teaching Graphics in Technical Communication Classes.

ERIC Educational Resources Information Center

Spurgeon, Kristene C.

Perhaps because the United States is undergoing a video revolution, perhaps because of its increasing sales of goods to non-English speaking markets where graphics can help explain the products, perhaps because of the decreasing communication skills of the work force, graphic aids are becoming more and more widely used and more and more important.…

The Digital Work Force: Building Infotech Skills at the Speed of Innovation.

ERIC Educational Resources Information Center

Meares, Carol Ann; Sargent, John F., Jr.

This report is the product of an effort by the Office of Technology Policy to assess current and future needs for information technology (IT) workers through a comprehensive information-gathering project that included the following three activities: (1) nationwide regional meetings that included discussions with industry executives,…

The Database Business: Managing Today--Planning for Tomorrow. Optimizing Human Resource Factors.

ERIC Educational Resources Information Center

Clark, Joseph E.; And Others

1988-01-01

The first paper describes the National Technical Information Service productivity improvement system and its emphasis on human resources development. The second addresses the benefits of telecommuting to employers and employees. The third discusses the problems generated by the baby boom work force pressing for advancement at a time when many…

Older Worker Attitudes toward Change and Challenge.

ERIC Educational Resources Information Center

Donchin, Gwyneth G.

A task force from a high technology company recently conducted a nine-month study to determine the attitudes of older workers toward work, management, technological change, and productivity. Data were gathered from personnel files; an age audit was undertaken, and 4,000 employees were randomly interviewed. The workers were asked to offer opinions…

Vocational Education at the Crossroads.

ERIC Educational Resources Information Center

Merkel-Keller, Claudia

The United States faces stiff global competition in the marketplace of the future as other countries such as Germany, Japan, and the nations of the Pacific rim produce better products with a more skilled work force. Germany and Japan spend far more resources on job training for their youth than does the United States, especially on training…

Project REACH. Regional Education to Achieve with Company Help. Performance Report.

ERIC Educational Resources Information Center

Parkway School District, Chesterfield, MO.

Project REACH (Regional Education to Achieve with Company) was a regional workplace literacy (WL) program designed to increase the levels of literacy, job performance/satisfaction/retention, productivity, and self-esteem of the work force of six businesses in the Saint Louis area and to foster the development of business-education partnerships for…

Soviet Political Perspectives on Power Projection.

DTIC Science & Technology

1987-03-01

justified by the recognition on the part of many Soviet economists that the traditional Soviet development model does not work. Rapid nationalization...37 Models of Economic Development................................43 IV. ARMED STRUGGLE AND REVOLUTIONARY CHANGE...Soviets always describe revolutionary change in ~.~ the Third World as merely the product of local social and political forces, part of an inevitable

The Training of "Triple Helix Workers"? Doctoral Students in University-Industry-Government Collaborations

ERIC Educational Resources Information Center

Thune, Taran

2010-01-01

Changes in knowledge production, increasing interaction between government, universities and industry, and changes in labor markets for doctoral degree holders are forces that have spurred a debate about the organization of doctoral education and the competencies graduates need to master to work as scientists and researchers in a triple helix…

Comparing men's and women's experiences of work after cancer: a photovoice study.

PubMed

Morrison, T L; Thomas, R L

2015-10-01

Work is an important quality of life indicator for many cancer survivors. There is, however, a lack of appropriate support to help survivors with work integration. As a result, many survivors are forced to independently navigate their return to work, experiencing unnecessary pitfalls in the process. As a preliminary step toward addressing this current gap in survivorship support, we explored the work integration experiences of 20 cancer survivors, 10 women and 10 men. Photovoice methods were combined with two individual interviews per participant. Participant-produced photographs and interview transcripts were analyzed to identify key themes. Both commonalities and gender-differentiated motivations underlying work integration emerged. Female and male participants both demonstrated and discussed differentiated manners of coping. Men expressed a propensity for productivity and active engagements over talking used predominantly by women. Appreciation of men's proclivity for productivity and activity suggests that a gender-tailored approach to rehabilitation may enhance male survivors' participation and the utility of rehabilitation efforts.

Force production and time-averaged flow structure around thin, non-slender delta wings

NASA Astrophysics Data System (ADS)

Tu, Han; Green, Melissa

2017-11-01

Experimental force measurement and time-averaged three dimensional flow visualization of low Reynolds number baseline cases have been carried out on a steady flat plate delta wing. Current data will serve as steady reference for future unsteady flow and actuation cases. The comprehensive study will compare force production in highly unsteady environments, which is necessary to consider in unmanned combat aerial vehicle (UCAV) control strategies. Force measurements are carried out at angles of attack 10, 15, 20, 25 and 30 degrees. The coefficient of drag increases with angle of attack, while the coefficient of lift reaches a maximum value at 20 degrees. Time-averaged flow visualization conducted at angles of attack of 20, 25 and 30 degrees shows vortices with larger magnitude that persist farther into wake are generated at higher angles of attack. These results compare analogously with similar steady baseline experiment results of high Reynolds number conducted by collaborators. This work was supported by the Office of Naval Research under ONR Award No. N00014-16-1-2732. We also acknowledge the collaborative support of Dr. David Rival and Mr. Matthew Marzanek at Queen's University.

Music Theory and the Harmony Method in J. Kepler's Work " The harmony of the Universe"

NASA Astrophysics Data System (ADS)

Smirnov, V. A.

In Kepler's book The Harmony of the Universe, edited in 1619, the theory of music as a science of that time is presented. Also the investigation of the correspondence between musical proportion and orbital parameters of the planets is presented. Kepler's book The Harmony of the Universe is a work that discloses the basic physical regularities of the developing Universe, which so far had not been definitively formulated. To explain the development process, Kepler introduced the concept of a "productive force" or "forming force" that directs the development of natural phenomena with the principles of world harmony, described by him. In addition to the four known natural interactions is a fifth one, that had never been studied fully. In this way we can explain the development of natural phenomena as alive and nonalive. Arising from the "productive force" that directs the flow of processes with the laws of harmony is an explanation of the existence of "anti-entropy" processes, a contradiction to the second law of thermodynamics, but playing a fundamental part in nature. The "golden section" apparatus defines space and time frames of process flow. The contents of the book give a notion about the way or "program" of development. Which basic law of nature is hiden in the contents of book is yet to be resolved (Kepler, 1939).

Foreign workers in Kuwait: implications for the Kuwaiti labor force.

PubMed

Shah, N M

1986-01-01

An analysis of the foreign population in Kuwait shows that foreign nationals make up 60 percent of the population and 78 percent of the labor force in Kuwait. The implications of these figures for the Kuwaiti labor force are discussed by analyzing the occupational structures of Kuwaitis and non-Kuwaitis. "Structural analysis of the labor force indicates that 62 percent of Kuwaiti males are concentrated in administrative and service occupations while their percentage in sales and production work has declined during 1970-80. This demonstrates the need for reorienting educational/training programs and changing Kuwaiti attitudes towards manual work to ensure the realization of the 'Kuwaitization' process, and balance the nationals with foreign nationals." mortality has stabilized at relatively high levels and there is resistance to family planning. The author concludes that the main cause of the stalling of the demographic transition process is to be found in the role of the state and the dynamics of the social structure and that "demographic trends will depend more on the changes in social structure, land reforms, and response of the formal governing system to the needs of the underprivileged sections of the society, rather than on the health and family planning policies." excerpt

On-product overlay enhancement using advanced litho-cluster control based on integrated metrology, ultra-small DBO targets and novel corrections

NASA Astrophysics Data System (ADS)

Bhattacharyya, Kaustuve; Ke, Chih-Ming; Huang, Guo-Tsai; Chen, Kai-Hsiung; Smilde, Henk-Jan H.; Fuchs, Andreas; Jak, Martin; van Schijndel, Mark; Bozkurt, Murat; van der Schaar, Maurits; Meyer, Steffen; Un, Miranda; Morgan, Stephen; Wu, Jon; Tsai, Vincent; Liang, Frida; den Boef, Arie; ten Berge, Peter; Kubis, Michael; Wang, Cathy; Fouquet, Christophe; Terng, L. G.; Hwang, David; Cheng, Kevin; Gau, TS; Ku, Y. C.

2013-04-01

Aggressive on-product overlay requirements in advanced nodes are setting a superior challenge for the semiconductor industry. This forces the industry to look beyond the traditional way-of-working and invest in several new technologies. Integrated metrology2, in-chip overlay control, advanced sampling and process correction-mechanism (using the highest order of correction possible with scanner interface today), are a few of such technologies considered in this publication.

Strategies for Improving U.S. Air Force Productivity: Developing Methodologies for Assessing the Potential Relationship between Communication Behaviors and Productivity.

DTIC Science & Technology

1980-09-01

1176 NL EmillllllllEhmhmmhhhhhmhu ,mhhmmhhhhmhhhu Ehmmhhmhhmhhl EllhlhElhlhEEE Emmhhhhhhmmhu 1 II 12.5 111111.25 1 I1 6 MICROCOPY RESOLUTION TEST ...Technician Performance t/-O7 20J ABSTRCT fContinue an reverse aid* it necesary and Identify by block number) ILJ Liedhe poetwas a preliminary testing of a...of work characteristics. These were evaluated according to re- sponse patterns, factor structure, and/or reliability indicants.. Preliminary testing

Time-Dependent Testing Evaluation and Modeling for Rubber Stopper Seal Performance.

PubMed

Zeng, Qingyu; Zhao, Xia

2018-01-01

Sufficient rubber stopper sealing performance throughout the entire sealed product life cycle is essential for maintaining container closure integrity in the parenteral packaging industry. However, prior publications have lacked systematic considerations for the time-dependent influence on sealing performance that results from the viscoelastic characteristics of the rubber stoppers. In this paper, we report results of an effort to study these effects by applying both compression stress relaxation testing and residual seal force testing for time-dependent experimental data collection. These experiments were followed by modeling fit calculations based on the Maxwell-Wiechert theory modified with the Kohlrausch-Williams-Watts stretched exponential function, resulting in a nonlinear, time-dependent sealing force model. By employing both testing evaluations and modeling calculations, an in-depth understanding of the time-dependent effects on rubber stopper sealing force was developed. Both testing and modeling data show good consistency, demonstrating that the sealing force decays exponentially over time and eventually levels off because of the viscoelastic nature of the rubber stoppers. The nonlinearity of stress relaxation derives from the viscoelastic characteristics of the rubber stoppers coupled with the large stopper compression deformation into restrained geometry conditions. The modeling fit with capability to handle actual testing data can be employed as a tool to calculate the compression stress relaxation and residual seal force throughout the entire sealed product life cycle. In addition to being time-dependent, stress relaxation is also experimentally shown to be temperature-dependent. The present work provides a new, integrated methodology framework and some fresh insights to the parenteral packaging industry for practically and proactively considering, designing, setting up, controlling, and managing stopper sealing performance throughout the entire sealed product life cycle. LAY ABSTRACT: Historical publications in the parenteral packaging industry have lacked systematic considerations for the time-dependent influence on the sealing performance that results from effects of viscoelastic characteristic of the rubber stoppers. This study applied compression stress relaxation testing and residual seal force testing for time-dependent experimental data collection. These experiments were followed by modeling fit calculations based on the Maxwell-Wiechert theory modified with the Kohlrausch-Williams-Watts stretched exponential function, resulting in a nonlinear, time-dependent sealing force model. Experimental and modeling data show good consistency, demonstrating that sealing force decays exponentially over time and eventually levels off. The nonlinearity of stress relaxation derives from the viscoelastic characteristics of the rubber stoppers coupled with the large stopper compression deformation into restrained geometry conditions. In addition to being time-dependent stress relaxation, it is also experimentally shown to be temperature-dependent. The present work provides a new, integrated methodology framework and some fresh insights to the industry for practically and proactively considering, designing, setting up, controlling, and managing of the stopper sealing performance throughout the entire sealed product life cycle. © PDA, Inc. 2018.

76 FR 42709 - Submission for OMB Review; Prohibition on Acquisition of Products Produced by Forced or...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... on Acquisition of Products Produced by Forced or Indentured Child Labor AGENCY: Department of Defense... acquisition of products produced by forced or indentured child labor. DATES: Submit comments on or before... on Acquisition of Products Produced by Forced or Indentured Child Labor, by any of the following...

76 FR 24025 - Information Collection; Prohibition on Acquisition of Products Produced by Forced or Indentured...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Acquisition of Products Produced by Forced or Indentured Child Labor AGENCY: Department of Defense (DOD... acquisition of products produced by forced or indentured child labor. DATES: Submit comments on or before..., Prohibition on Acquisition of Products Produced by Forced or Indentured Child Labor, signed by the President...

48 CFR 22.1503 - Procedures for acquiring end products on the List of Products Requiring Contractor Certification...

Code of Federal Regulations, 2010 CFR

2010-10-01

... end products on the List of Products Requiring Contractor Certification as to Forced or Indentured... products on the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor... contracting officer must check the List of Products Requiring Contractor Certification as to Forced or...

Gender, Stress, and Coping in the U.S. Military. Volume 3. Performance.

DTIC Science & Technology

1995-10-01

work force was actually out of work and the production was not getting done. These college students (NTID is basically an undergraduate school for deaf...that can be learned and do not require any kind of mystical involvement in the idea of maleness. For example, 0 one of our Navy ROTC summer students who...an ongoing study at Duke of coronary vascular disease in a group of people who were students at UNC (University of North Carolina) in the early to mid

The Idyllic Workplace

NASA Technical Reports Server (NTRS)

Schoenfelder, Tony E.

2002-01-01

How many of us have worked in organizations where the discipline was so rigid and unyielding that it would send even a Marine Corps Drill Instructor screaming into the night? How many of us have worked in organizations where sightings of senior management were sporadic and rare, and any other interactions were by appointment only? Or, how many of us have worked in organizations where your role, absent specific direction, was to be seldom seen and rarely heard? And how many of us have worked in organizations where seemingly light itself was not permitted to escape without the acquiescence and approval of the director? Sadly, there are organizations that embody some of these conditions, and the resultant adverse effects on employee productivity, creativity and morale are profound. But what if you could work in an organization in which there was little hierarchy, where rank and seniority played no part, where there were no closed meetings or doors, where everyone knows what was expected of them, and where creativity was not only tolerated but encouraged and celebrated? Was there ever such a place? There was, and it was known as NASA's Space Station Task Force. I was fortunate enough to work there for a time, and I would like to tell you how this organization with few apparent rules led to incredibly high levels of employee satisfaction and fulfillment, and yielded work products of enduring quality. On May 20, 1982, NASA Administrator James M. Beggs established the Space Station Task Force under the direction of John D. Hodge. The Task Force was charged with the responsibility for "the development of the programmatic aspects of a Space Station as they evolve, including mission analysis, requirements definition and program management," and was authorized to draw on Space Station activities at the NASA Program Offices and Field Centers. No additional conditions or directions were provided. Hodge knew that in order to accomplish the job he had been given, he was going to have to obtain the services of the "best and the brightest" and facilitate the unleashing of the full force of their creative capabilities. In order to avoid the stultifying effects of a typical hierarchical organization, he set up a loosely structured, horizontal organization with only one supervisor of record - himself. He populated this organization with detailees from Headquarters, the field Centers and the Jet Propulsion Lab, thereby assuring himself of the political and technical expertise with which to deal with Congress and the bureaucracy, and conduct the required engineering studies and analyses.

The health and cost implications of high body mass index in Australian defence force personnel.

PubMed

Peake, Jonathan; Gargett, Susan; Waller, Michael; McLaughlin, Ruth; Cosgrove, Tegan; Wittert, Gary; Nasveld, Peter; Warfe, Peter

2012-06-19

Frequent illness and injury among workers with high body mass index (BMI) can raise the costs of employee healthcare and reduce workforce maintenance and productivity. These issues are particularly important in vocational settings such as the military, which require good physical health, regular attendance and teamwork to operate efficiently. The purpose of this study was to compare the incidence of injury and illness, absenteeism, productivity, healthcare usage and administrative outcomes among Australian Defence Force personnel with varying BMI. Personnel were grouped into cohorts according to the following ranges for (BMI): normal (18.5 - 24.9 kg/m2; n = 197), overweight (25-29.9 kg/m2; n = 154) and obese (≥30 kg/m2) with restricted body fat (≤28% for females, ≤24% for males) (n = 148) and with no restriction on body fat (n = 180). Medical records for each individual were audited retrospectively to record the incidence of injury and illness, absenteeism, productivity, healthcare usage (i.e., consultation with medical specialists, hospital stays, medical investigations, prescriptions) and administrative outcomes (e.g., discharge from service) over one year. These data were then grouped and compared between the cohorts. The prevalence of injury and illness, cost of medical specialist consultations and cost of medical scans were all higher (p < 0.05) in both obese cohorts compared with the normal cohort. The estimated productivity losses from restricted work days were also higher (p < 0.05) in the obese cohort with no restriction on body fat compared with the normal cohort. Within the obese cohort, the prevalence of injury and illness, healthcare usage and productivity were not significantly greater in the obese cohort with no restriction on body fat compared with the cohort with restricted body fat. The number of restricted work days, the rate of re-classification of Medical Employment Classification and the rate of discharge from service were similar between all four cohorts. High BMI in the military increases healthcare usage, but does not disrupt workforce maintenance. The greater prevalence of injury and illness, greater healthcare usage and lower productivity in obese Australian Defence Force personnel is not related to higher levels of body fat.

Poland's Education and Training: Boosting and Adapting Human Capital. OECD Economics Department Working Papers, No. 495

ERIC Educational Resources Information Center

O'Brien, Paul; Paczynski, Wojciech

2006-01-01

An effective system of education and training is important for both social and economic reasons. Its role in the Polish economy is to provide the current and future labour force with skills to facilitate both continuing productivity growth and reallocation of resources as structural adjustment proceeds. Important reforms to decentralise primary…

It's Time to Improve Academic, Not Just Administrative, Productivity

ERIC Educational Resources Information Center

Massy, William F.

2009-01-01

There is no doubt that the American economy is in the midst of a major restructuring. While the consequences are not yet fully apparent, two powerful implications for higher education have become clear. First, because solutions to the nation's problems will require a highly educated work force, the demands on colleges can only increase. Second,…

Total Quality Management (TQM) as the Procedure for Management of Integrated Academics.

ERIC Educational Resources Information Center

Anderson, Lowell D.

Total Quality Management (TQM) is a way of doing business that involves every employee, both labor and management, in an effort to improve quality and productivity. The quality management concept consists of common principles: (1) customer focus; (2) process focus; (3) failure prevention; (4) mobilization of work force; (5) decision making based…

Approaches to Forming a Learning Consortium. Issues to Address. Business Assistance Note #3.

ERIC Educational Resources Information Center

Bergman, Terri

A learning consortium is a group of companies that come together to learn from each other to develop new capabilities, build the skills of their employees, and increase the productive capacities of their enterprises. Most undertake both work force and workplace development efforts. Although the key feature is cooperative learning, most learning…

Policy issues inherent in advanced technology development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baumann, P.D.

1994-12-31

In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most ofmore » the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.« less

Mental health issues in the workplace: maintaining a productive work force.

PubMed

Raderstorf, Mark; Kurtz, Jennifer

2006-08-01

Occupational health nurses must intervene early and validate the conditions and experiences of employees with psychiatric disabilities. Occupational health nurses must ensure employees are receiving appropriate treatment. They must be aware of and prepared to mitigate iatrogenic influences. Occupational health nurses can facilitate resolution of workplace conflicts and issues regarding changing supervisors or departments. They can also facilitate return to work by establishing clear restrictions and coordinating accommodations. compassionate and supportive, yet assertive, approach is key to managing mental health disability. It will, in most cases, facilitate successful return to full-time work.

Ergonomics and quality management--humans in interaction with technology, work environment, and organization.

PubMed

Eklund, J A

1999-01-01

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate important ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elaborate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, inappropriate design of technology, and an unsuitable organization are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain support from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.

A metabolic basis for impaired muscle force production and neuromuscular compensation during sprint cycling.

PubMed

Bundle, Matthew W; Ernst, Carrie L; Bellizzi, Matthew J; Wright, Seth; Weyand, Peter G

2006-11-01

For both different individuals and modes of locomotion, the external forces determining all-out sprinting performances fall predictably with effort duration from the burst maximums attained for 3 s to those that can be supported aerobically as trial durations extend to roughly 300 s. The common time course of this relationship suggests a metabolic basis for the decrements in the force applied to the environment. However, the mechanical and neuromuscular responses to impaired force production (i.e., muscle fatigue) are generally considered in relation to fractions of the maximum force available, or the maximum voluntary contraction (MVC). We hypothesized that these duration-dependent decrements in external force application result from a reliance on anaerobic metabolism for force production rather than the absolute force produced. We tested this idea by examining neuromuscular activity during two modes of sprint cycling with similar external force requirements but differing aerobic and anaerobic contributions to force production: one- and two-legged cycling. In agreement with previous studies, we found greater peak per leg aerobic metabolic rates [59% (+/-6 SD)] and pedal forces at VO2 peak [30% (+/-9)] during one- vs. two-legged cycling. We also determined downstroke pedal forces and neuromuscular activity by surface electromyography during 15 to 19 all-out constant load sprints lasting from 12 to 400 s for both modes of cycling. In support of our hypothesis, we found that the greater reliance on anaerobic metabolism for force production induced compensatory muscle recruitment at lower pedal forces during two- vs. one-legged sprint cycling. We conclude that impaired muscle force production and compensatory neuromuscular activity during sprinting are triggered by a reliance on anaerobic metabolism for force production.

Transition from wing to leg forces during landing in birds.

PubMed

Provini, Pauline; Tobalske, Bret W; Crandell, Kristen E; Abourachid, Anick

2014-08-01

Transitions to and from the air are critical for aerial locomotion and likely shaped the evolution of flying animals. Research on take-off demonstrates that legs generate greater body accelerations compared with wings, and thereby contribute more to initial flight velocity. Here, we explored coordination between wings and legs in two species with different wingbeat styles, and quantified force production of these modules during the final phase of landing. We used the same birds that we had previously studied during take-off: zebra finch (Taeniopygia guttata, N=4) and diamond dove (Geopelia cuneata, N=3). We measured kinematics using high-speed video, aerodynamics using particle image velocimetry, and ground-reaction forces using a perch mounted on a force plate. In contrast with the first three wingbeats of take-off, the final four wingbeats during landing featured ~2 times greater force production. Thus, wings contribute proportionally more to changes in velocity during the last phase of landing compared with the initial phase of take-off. The two species touched down at the same velocity (~1 m s(-1)), but they exhibited significant differences in the timing of their final wingbeat relative to touchdown. The ratio of average wing force to peak leg force was greater in diamond doves than in zebra finches. Peak ground reaction forces during landing were ~50% of those during take-off, consistent with the birds being motivated to control landing. Likewise, estimations of mechanical energy flux for both species indicate that wings produce 3-10 times more mechanical work within the final wingbeats of flight compared with the kinetic energy of the body absorbed by legs during ground contact. © 2014. Published by The Company of Biologists Ltd.

OptForce: An Optimization Procedure for Identifying All Genetic Manipulations Leading to Targeted Overproductions

PubMed Central

Ranganathan, Sridhar; Suthers, Patrick F.; Maranas, Costas D.

2010-01-01

Computational procedures for predicting metabolic interventions leading to the overproduction of biochemicals in microbial strains are widely in use. However, these methods rely on surrogate biological objectives (e.g., maximize growth rate or minimize metabolic adjustments) and do not make use of flux measurements often available for the wild-type strain. In this work, we introduce the OptForce procedure that identifies all possible engineering interventions by classifying reactions in the metabolic model depending upon whether their flux values must increase, decrease or become equal to zero to meet a pre-specified overproduction target. We hierarchically apply this classification rule for pairs, triples, quadruples, etc. of reactions. This leads to the identification of a sufficient and non-redundant set of fluxes that must change (i.e., MUST set) to meet a pre-specified overproduction target. Starting with this set we subsequently extract a minimal set of fluxes that must actively be forced through genetic manipulations (i.e., FORCE set) to ensure that all fluxes in the network are consistent with the overproduction objective. We demonstrate our OptForce framework for succinate production in Escherichia coli using the most recent in silico E. coli model, iAF1260. The method not only recapitulates existing engineering strategies but also reveals non-intuitive ones that boost succinate production by performing coordinated changes on pathways distant from the last steps of succinate synthesis. PMID:20419153

Recovery of metal values from copper slag and reuse of residual secondary slag.

PubMed

Sarfo, Prince; Das, Avimanyu; Wyss, Gary; Young, Courtney

2017-12-01

Resource and environmental factors have become major forces in mining and metallurgy sectors driving research for sustainability purposes. The concept of zero-waste processing has been gaining ground readily. The scant availability of high quality raw materials has forced the researchers to shift their focus to recycling while the exceedingly stringent environmental regulations have forced researchers to explore new frontiers of minimizing/eliminating waste generation. The present work is aimed at addressing both aspects by employing recycling to generate wealth from copper slag and producing utilizable materials at the same time thus restoring the ecosystem. Copper slag was characterized and processed. The pyro-metallurgical processing prospects to generate utilizable materials were arrived at through rigorous thermodynamic analysis. Carbothermal reduction at elevated temperature (near 1440°C) helped recover a majority of the metal values (e.g., Fe, Cu and Mo) into the iron-rich alloy product which can be a feed material for steel making. On the other hand, the non-metallic residue, the secondary slag, can be used in the glass and ceramic industries. Reduction time and temperature and carbon content were shown to be the most important process variables for the reaction which were optimized to identify the most favored operating regime that maximizes the metal recovery and simultaneously maximizes the hardness of the secondary slag and minimizes its density, the two major criteria for the secondary slag product to be utilizable. The flux addition level was shown to have relatively less impact on the process performance if these are maintained at an adequate level. The work established that the copper slag, a waste material, can be successfully processed to generate reusable products through pyrometallurgical processing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Size, History-Dependent, Activation and Three-Dimensional Effects on the Work and Power Produced During Cyclic Muscle Contractions.

PubMed

Ross, Stephanie A; Ryan, David S; Dominguez, Sebastian; Nigam, Nilima; Wakeling, James M

2018-05-03

Muscles undergo cycles of length change and force development during locomotion, and these contribute to their work and power production to drive body motion. Muscle fibres are typically considered to be linear actuators whose stress depends on their length, velocity, and activation state, and whose properties can be scaled up to explain the function of whole muscles. However, experimental and modelling studies have shown that a muscle's stress additionally depends on inactive and passive tissues within the muscle, the muscle's size, and its previous contraction history. These effects have not been tested under common sets of contraction conditions, especially the cyclic contractions that are typical of locomotion. Here we evaluate the relative effects of size, history-dependent, activation and three-dimensional effects on the work and power produced during cyclic contractions of muscle models. Simulations of muscle contraction were optimized to generate high power outputs: this resulted in the muscle models being largely active during shortening, and inactive during lengthening. As such, the history-dependent effects were dominated by force depression during simulated active shortening rather than force enhancement during active stretch. Internal work must be done to deform the muscle tissue, and to accelerate the internal muscle mass, resulting in reduced power and work that can be done on an external load. The effect of the muscle mass affects the scaling of muscle properties, with the inertial costs of contraction being relatively greater at larger sizes and lower activation levels.

America's Changing Work Force: Statistics in Brief.

ERIC Educational Resources Information Center

American Association of Retired Persons, Washington, DC.

This booklet provides information about the demographics of the changing work force. It offers an at-a-glance profile of workers age 45 and older and considers likely changes in the work force of the future. The document includes topics such as the composition of the work force of today and tomorrow by age and sex, labor force participation rates,…

Design and testing of an innovative measurement device for tyre-road contact forces

NASA Astrophysics Data System (ADS)

Cheli, F.; Braghin, F.; Brusarosco, M.; Mancosu, F.; Sabbioni, E.

2011-08-01

The measurement of tyre-road contact forces is the first step towards the development of new control systems for improving vehicle safety and performances. Tyre-road contact forces measurement systems are very expensive and significantly modify the unsprung masses of the vehicle as well as the rotational inertia of the tyres. Thus, vehicle dynamics results are significantly affected. As a consequence, the measured contact forces do not correspond to the contact forces under real working conditions. A new low-cost tyre-road contact forces measurement system is proposed in this paper that can be applied to passenger cars. Its working principle is based on the measurement of three deformations of the wheel rim through strain gauges. The tyre-rim assembly is thus turned into a sensor for tyre-road contact forces. The influence of the strain gauges position onto the measurement results has been assessed through finite element simulations and experimental tests. It has been proven that, for a large variety of rims, the strain gauge position that leads to high signal-to-noise ratios is almost the same. A dynamic calibration procedure has been developed in order to allow the reconstruction of contact force and torque components once per wheel turn. The capability of the developed device to correctly estimate tyre-road contact forces has been assessed, in a first stage, through indoor laboratory experimental test on an MTS Flat-Trac ® testing machine. Results show that the implemented measuring system allows to reconstruct contact forces once per wheel turn with a precision that is comparable to that of existing high-cost measurement systems. Subsequently, outdoor tests with a vehicle having all four wheels equipped with the developed measuring device have also been performed. Reliability of the measurements provided by the developed sensor has been assessed by comparing the global measured longitudinal/lateral forces and the product of the measured longitudinal/lateral accelerations times the vehicle mass. A good agreement has been found during all the performed manoeuvres.

Effect of block weight on work demands and physical workload during masonry work.

PubMed

Van Der Molen, H F; Kuijer, P P F M; Hopmans, P P W; Houweling, A G; Faber, G S; Hoozemans, M J M; Frings-Dresen, M H W

2008-03-01

The effect of block weight on work demands and physical workload was determined for masons who laid sandstone building blocks over the course of a full work day. Three groups of five sandstone block masons participated. Each group worked with a different block weight: 11 kg, 14 kg or 16 kg. Productivity and durations of tasks and activities were assessed through real time observations at the work site. Energetic workload was also assessed through monitoring the heart rate and oxygen consumption at the work site. Spinal load of the low back was estimated by calculating the cumulated elastic energy stored in the lumbar spine using durations of activities and previous data on corresponding compression forces. Block weight had no effect on productivity, duration or frequency of tasks and activities, energetic workload or cumulative spinal load. Working with any of the block weights exceeded exposure guidelines for work demands and physical workload. This implies that, regardless of block weight in the range of 11 to 16 kg, mechanical lifting equipment or devices to adjust work height should be implemented to substantially lower the risk of low back injuries.

Collaborative environments for capability-based planning

NASA Astrophysics Data System (ADS)

McQuay, William K.

2005-05-01

Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.

Work demands, job insecurity and sickness absence from work. how productive is the new, flexible labour force?

PubMed

D'Souza, Rennie M; Strazdins, Lyndall; Broom, Dorothy H; Rodgers, Bryan; Berry, Helen L

2006-06-01

We investigate one aspect of productivity--sickness absence--and ask whether job insecurity and high work demands are associated with increased sickness absence and, if so, whether mental or physical health mediates this association. We further investigate if having control at work modifies these associations. We used cross-sectional survey data from 2,248 employees aged 40-44 years living in two cities of south-eastern Australia. Logistic regressions were used to compare the associations between job insecurity and demands among those with short (1-3 days) or long-term (> 3 days) sickness absence with those who had no sickness absence in the last four weeks. The mediating effects of mental and physical health were assessed by evaluating changes in the magnitude of the association between these work conditions and sickness absence. High job insecurity (OR = 3.28; 95% CI 1.54-6.95) and high work demands (OR = 1.62; 95% CI 1.13-2.30) were significantly associated with long-term, but not with short-term, sickness absence. These associations were unaffected by job control. Depression and anxiety explained 61% of the association between high work demands and long-term sickness absence and 30% of the association between job insecurity and long-term sickness absence. Difficult working conditions may reduce productivity by contributing to longer absences from work. Reforms intended to improve economic performance should address any potential health costs of insecurity or intensification, which could inadvertently decrease productivity, possibly through their impact on mental health.

Numerical Exact Ab Initio Four-Nucleon Scattering Calculations: from Dream to Reality

NASA Astrophysics Data System (ADS)

Fonseca, A. C.; Deltuva, A.

2017-03-01

In the present manuscript we review the work of the last ten years on the pursuit to obtain numerical exact solutions of the four-nucleon scattering problem using the most advanced force models that fit two nucleon data up to pion production threshold with a χ ^2 per data point approximately one, together with the Coulomb interaction between protons; three- and four-nucleon forces are also included in the framework of a meson exchange potential model where NN couples to NΔ. Failure to describe the world data on four-nucleon scattering observables in the framework of a non relativistic scattering approach falls necessarily on the force models one uses. Four-nucleon observables pose very clear challenges, particular in the low energy region where there are a number of resonances whose position and width needs to be dynamically generated by the nucleon-nucleon (NN) interactions one uses. In addition, our calculations constitute the most advance piece of work where observables for all four-nucleon reactions involving isospin I=0, I=0 coupled to I=1 and isospin I=1 initial states are calculated at energies both below and above breakup threshold. We also present a very extensive comparison between calculated results and data for cross sections and spin observables. Therefore the present work reveals both the shortcomings and successes of some of the present NN force models in describing four-nucleon data and serve as a benchmark for future developments.

Employment barriers for persons with psychiatric disabilities: update of a report for the President's Commission.

PubMed

Cook, Judith A

2006-10-01

A major public policy problem is the extremely low labor force participation of people with severe mental illness coupled with their overrepresentation on the public disability rolls. This situation is especially troubling given the existence of evidence-based practices designed to return them to the labor force. This article reviews research from the fields of disability, economics, health care, and labor studies to describe the nature of barriers to paid work and economic security for people with disabling mental disorders. These barriers include low educational attainment, unfavorable labor market dynamics, low productivity, lack of appropriate vocational and clinical services, labor force discrimination, failure of protective legislation, work disincentives caused by state and federal policies, poverty-level income, linkage of health care access to disability beneficiary status, and ineffective work incentive programs. The article concludes with a discussion of current policy initiatives in health care, mental health, and disability. Recommendations for a comprehensive system of services and supports to address multiple barriers are presented. These include access to affordable health care, including mental health treatment and prescription drug coverage; integrated clinical and vocational services; safe and stable housing that is not threatened by changes in earned income; remedial and postsecondary education and vocational training; benefits counseling and financial literacy education; economic security through asset development; legal aid for dealing with employment discrimination; peer support and self-help to enhance vocational self-image and encourage labor force attachment; and active involvement of U.S. business and employer communities.

Linear and nonlinear thermodynamics of a kinetic heat engine with fast transformations

NASA Astrophysics Data System (ADS)

Cerino, Luca; Puglisi, Andrea; Vulpiani, Angelo

2016-04-01

We investigate a kinetic heat engine model composed of particles enclosed in a box where one side acts as a thermostat and the opposite side is a piston exerting a given pressure. Pressure and temperature are varied in a cyclical protocol of period τ : their relative excursions, δ and ɛ , respectively, constitute the thermodynamic forces dragging the system out of equilibrium. The analysis of the entropy production of the system allows us to define the conjugated fluxes, which are proportional to the extracted work and the consumed heat. In the limit of small δ and ɛ the fluxes are linear in the forces through a τ -dependent Onsager matrix whose off-diagonal elements satisfy a reciprocal relation. The dynamics of the piston can be approximated, through a coarse-graining procedure, by a Klein-Kramers equation which—in the linear regime—yields analytic expressions for the Onsager coefficients and the entropy production. A study of the efficiency at maximum power shows that the Curzon-Ahlborn formula is always an upper limit which is approached at increasing values of the thermodynamic forces, i.e., outside of the linear regime. In all our analysis the adiabatic limit τ →∞ and the the small-force limit δ ,ɛ →0 are not directly related.

Women and changes in the Chilean economy: some questions.

PubMed

Smiaroski, M S

1996-10-01

The author argues that a new development model that encourages greater participation of women in the work force in domestic piecework, temporary work, and subcontracting may further lead to the exploitation of women in Chile. The importance of women in economic development in Chile should be based on building skills, providing support child care services, reorienting women's education, and tax incentives. Chile over the past decade has achieved relatively stable economic growth and increased employment of women. During 1990-93 the growth of women in the work force increased at a rate of 16.8%, while men's presence increased by only 9.8%. The Chilean economy is based on a sophisticated modern sector and a labor-intensive informal sector. The Chilean model of development relies on cheap, flexible labor and a government approval of this model. Increased participation of women in the labor force is usually perceived as increased economic empowerment. A 1994 Oxfam study found that women were being forced into the labor market due to declines in family income and low wages. 46% of men and women received wages that did not cover basic necessities. The Chilean labor market is gender-stratified. Men are paid better than women for the same work. Men are in more permanent positions. Labor laws are either inadequate or violated, particularly for hours of work and overtime pay and conditions of employment and benefits. Traditional female jobs are those that rely on women's natural attributes. These unskilled attributes are rewarded with low wages. Little opportunity is provided for upgrading skills or acquiring new skills. Some women turn down advancement because of a lack of role models. Women have little opportunity to develop their self-image as workers. Poor self-images affect women's work attitudes and motivation. Some firms use competition between women to boost production. Chilean women remain in subordinate roles.

Radon and its daughter products behaviour in the air of an underground tourist route in the former arsenic and gold mine in Złoty Stok (Sudety Mountains, SW Poland).

PubMed

Przylibski, T A

2001-01-01

This paper describes the occurrence of radon and its daughter products in the accessible workings, partially open to the public, in the former arsenic and gold mine in Zloty Stok. The geology of the area and the characteristics of the workings provide the background for explanation of the genesis of radon and its daughter products and of the spatial and temporal variations in their concentrations. The results demonstrate that well-ventilated areas along the tourist route have the lowest values of all the measured parameters and that temporal variations of these parameters are irregular. The highest concentration values for radon (up to 18.50kBq/m3) and its daughter products (up to 14.49kBq/m3) have been recorded in the workings with obstructed natural ventilation. These are the areas where seasonal oscillations in the concentrations of these isotopes have been registered, with the maxima in summer and the minima in winter. These sections of the workings are inaccessible to the casual visitor. Radon is supplied to the workings from the side walls and its concentration is influenced, most of all, by ventilation and the degree of rock fissuring. The reason is the uniform and not very high content of 226Ra in the rocks where the galleries were excavated. Only locally, in the workings of the Gertruda adit lying outside the tourist route, do open fault zones have significant influence on enhanced concentrations of radon and its daughter products. These fault zones constitute effective routes of radon migration to the workings. In spite of this, it must be stated that neither guides nor tourists are exposed to excessive concentrations of radon or its daughter products in the tourist route area. However, the extension of the route to other workings will require the introduction of forced ventilation in order to lower theconcentration of radon and its daughter products. reserved.

Meeting the challenges of an aging workforce.

PubMed

Silverstein, Michael

2008-04-01

Demographic, labor market and economic forces are combining to produce increases in the number and percentage of U.S. workers 55 and older. In some ways these workers will be our most skilled and productive employees but in others the most vulnerable. The literature on aging and work was reviewed, including demographic trends, physical and cognitive changes, safety and performance, work ability, and retirement patterns. Older workers have more serious, but less frequent, workplace injuries and illnesses than younger ones. There is evidence that many of these problems can be prevented and their consequences reduced by anticipating the physical and cognitive changes of age. Many employers are aware that such efforts are necessary, but most have not yet addressed them. There is a need for implementation and evaluative research of programs and policies with four dimensions: the work environment, work arrangements and work-life balance, health promotion and disease prevention, and social support. Employers who establish age-friendly workplaces that promote and support the work ability of employees as they age may gain in safety, productivity, competitiveness, and sustainable business practices. (c) 2008 Wiley-Liss, Inc.

Draft SEI Program Plans: 1994-1998

DTIC Science & Technology

1993-08-01

process must depersonalize risks so they are viewed as opportunities for program success. Factors for communication are in all the method devel...and the undergraduate level to adequately prepare new soft- ware engineers entering the work force. Educators and trainers of current professionals...learning opportu- nities. The technical foundation for many of these products is the evolving SEI model curricula for graduate and undergraduate degree

Business and the Future of Education. Sequoia Action Brief #1.

ERIC Educational Resources Information Center

Hawkins, Robert B., Jr.

Many entry level employees do not have the skills to become productive members of the work force. The nationwide decline in educational performance is documented by functional illiteracy among 13 percent of white 17-year-olds, and 42 percent of black 17-year-olds; a decline in the national average scores on the Scholastic Aptitude Test (SAT); and…

Stakeholder Views on Attributes of Scientific Literacy Important for Future Citizens and Employees--A Delphi Study

ERIC Educational Resources Information Center

Post, Aveliis; Rannikmae, Miia; Holbrook, Jack

2011-01-01

This study is based on the creation of a theoretical tool for determining competencies and knowledge in science education which stakeholders value as necessary for students to become productive members of the future work force as well as responsible citizens. Stakeholders' opinions (N = 85) were gathered from persons in different walks of life by…

More Than Meets the Eye: How Relationships Enhance Literacy Learning.

ERIC Educational Resources Information Center

Skolnick, Donna

Why does one classroom hum with productivity and enthusiasm and the one next door sag under the weight of the work? To understand the invisible forces within a classroom of busy children, people must look beneath the surface to the relationships that shape behavior and determine daily patterns of teaching and learning. This book focuses on the web…

The Economic Implications of Korean Unification

DTIC Science & Technology

2002-06-01

allowing unplanned activities to become legal.205 In a similar vein, state employees were forced to create their own work-arounds by increasingly...enterprises were given the option to adopt a piece-rate system for employee wages to spur labor productivity. 208...Indonesia, Vietnam has weathered the Asian economic crisis rather well. Unlike the deep recession that faced Thailand, Malaysia , Indonesia, and

Mexico's New Braceros: How NAFTA Promotes Child Labor and Truancy in the Onion Fields of Mexicali.

ERIC Educational Resources Information Center

Bacon, David

1997-01-01

Although NAFTA has proven profitable for U.S. growers who have relocated agricultural production to Mexico, it has helped create an economic crisis that has forced thousands of Mexican children to leave school in order to work and supplement their parents' shrinking income. In Mexicali Valley (Baja California), approximately a fourth of the…

Workforce Development: Building Statewide Systems. Issue Paper No. 2. Investing in People Project.

ERIC Educational Resources Information Center

McCarthy, Karin; Lashman, Rebekah

This report is the product of a project called Investing in People, in which the National Conference of Legislatures and Jobs for the Future helped five states as they tried to develop and implement work force preparation and training strategies to meet the challenge of a competitive global economy. The report is organized in six sections. The…

The older worker with osteoarthritis of the knee.

PubMed

Palmer, Keith T

2012-06-01

Changing demographics mean that many patients with large joint arthritis will work beyond traditional retirement age. This review considers the impact of knee osteoarthritis (OA) on work participation and the relation between work and total knee replacement (TKR). Two systematic searches in Embase and Medline, supplemented by three systematic reviews. Probably, although evidence is limited, knee OA considerably impairs participation in work (labour force participation, work attendance and work productivity). AREAS OF UNCERTAINTY/RESEARCH NEED: Little is known about effective interventions (treatments, work changes and policies) to improve vocational participation in patients with knee OA; or how type of work affects long-term clinical outcomes (e.g. pain, function and the need for revision surgery) in patients with TKRs. The need for such research is pressing and opportune, as increasing numbers of patients with knee OA or TKR expect to work on.

Using optical tweezers to relate the chemical and mechanical cross-bridge cycles.

PubMed

Steffen, Walter; Sleep, John

2004-12-29

In most current models of muscle contraction there are two translational steps, the working stroke, whereby an attached myosin cross-bridge moves relative to the actin filament, and the repriming step, in which the cross-bridge returns to its original orientation. The development of single molecule methods has allowed a more detailed investigation of the relationship of these mechanical steps to the underlying biochemistry. In the normal adenosine triphosphate cycle, myosin.adenosine diphosphate.phosphate (M.ADP.Pi) binds to actin and moves it by ca. 5 nm on average before the formation of the end product, the rigor actomyosin state. All the other product-like intermediate states tested were found to give no net movement indicating that M.ADP.Pi alone binds in a pre-force state. Myosin states with bound, unhydrolysed nucleoside triphosphates also give no net movement, indicating that these must also bind in a post-force conformation and that the repriming, post- to pre-transition during the forward cycle must take place while the myosin is dissociated from actin. These observations fit in well with the structural model in which the working stroke is aligned to the opening of the switch 2 element of the ATPase site.

Industry 4.0 - How will the nonwoven production of tomorrow look like?

NASA Astrophysics Data System (ADS)

Cloppenburg, F.; Münkel, A.; Gloy, Y.; Gries, T.

2017-10-01

Industry 4.0 stands for the on-going fourth industrial revolution, which uses cyber physical systems. In the textile industry the terms of industry 4.0 are not sufficiently known yet. First developments of industry 4.0 are mainly visible in the weaving industry. The cost structure of the nonwoven industry is unique in the textile industry. High shares of personnel, energy and machine costs are distinctive for nonwoven producers. Therefore the industry 4.0 developments in the nonwoven industry should concentrate on reducing these shares by using the work force efficiently and by increasing the productivity of first-rate quality and therefore decreasing waste production and downtimes. Using the McKinsey digital compass three main working fields are necessary: Self-optimizing nonwoven machines, big data analytics and assistance systems. Concepts for the nonwoven industry are shown, like the “EasyNonwoven” concept, which aims on economically optimizing the machine settings using self-optimization routines.

The New Work Force. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Imel, Susan

During the last years of this century, the work force will grow more slowly, becoming older, more female, and more disadvantaged. An increasing number of minority groups and immigrants will enter the work force. Despite public demands for reform, education lags behind in preparing youth for employment. The changing work force has many implications…

Feedback control in deep drawing based on experimental datasets

NASA Astrophysics Data System (ADS)

Fischer, P.; Heingärtner, J.; Aichholzer, W.; Hortig, D.; Hora, P.

2017-09-01

In large-scale production of deep drawing parts, like in automotive industry, the effects of scattering material properties as well as warming of the tools have a significant impact on the drawing result. In the scope of the work, an approach is presented to minimize the influence of these effects on part quality by optically measuring the draw-in of each part and adjusting the settings of the press to keep the strain distribution, which is represented by the draw-in, inside a certain limit. For the design of the control algorithm, a design of experiments for in-line tests is used to quantify the influence of the blank holder force as well as the force distribution on the draw-in. The results of this experimental dataset are used to model the process behavior. Based on this model, a feedback control loop is designed. Finally, the performance of the control algorithm is validated in the production line.

Decision method for optimal selection of warehouse material handling strategies by production companies

NASA Astrophysics Data System (ADS)

Dobos, P.; Tamás, P.; Illés, B.

2016-11-01

Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

Agricultural science and food policy for consumers and workers: recipes for public health successes or disasters?

PubMed

Watterson, A

2000-01-01

In the world of high speed globalization, the search for global food and water security has failed despite being driven by aggressive agribusiness and aided all too often by so-called Green Revolution research scientists and technologists. In the process, agricultural workers, rural communities, and food production workers face significant occupational and environmental hazards. Countervailing forces to the World Trade Organization (WTO) and agribusiness food strategies are needed. Critical to these forces will be Non-Governmental Organizations (NGOs) working toward non-toxic, nondestructive, community-based agriculture informed by integrated humanistic, scientifically cautious, worker-sensitive, and ecologically located principles.

The synergic control of multi-finger force production: Stability of explicit and implicit task components

PubMed Central

Reschechtko, Sasha; Zatsiorsky, Vladimir M.; Latash, Mark L.

2016-01-01

Manipulating objects with the hands requires the accurate production of resultant forces including shear forces; effective control of these shear forces also requires the production of internal forces normal to the surface of the object(s) being manipulated. In the present study, we investigated multi-finger synergies stabilizing shear and normal components of force, as well as drifts in both components of force, during isometric pressing tasks requiring a specific magnitude of shear force production. We hypothesized that shear and normal forces would evolve similarly in time, and also show similar stability properties as assessed by the decomposition of inter-trial variance within the uncontrolled manifold hypothesis. Healthy subjects were required to accurately produce total shear and total normal forces with four fingers of the hand during a steady-state force task (with and without visual feedback) and a self-paced force pulse task. The two force components showed similar time profiles during both shear force pulse production and unintentional drift induced by turning the visual feedback off. Only the explicitly instructed components of force, however, were stabilized with multi-finger synergies. No force-stabilizing synergies and no anticipatory synergy adjustments were seen for the normal force in shear force production trials. These unexpected qualitative differences in the control of the two force components – which are produced by some of the same muscles and show high degree of temporal coupling – are interpreted within the theory of control with referent coordinates for salient variables. These observations suggest the existence of two classes of neural variables: one that translates into shifts of referent coordinates and defines changes in magnitude of salient variables, and the other controlling gains in back-coupling loops that define stability of the salient variables. Only the former are shared between the explicit and implicit task components. PMID:27601252

75 FR 78755 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to... products requiring federal contractor certification as to the use of forced or indentured child labor. To.... 13126 (``Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor''), in...

NASA/ORNL/AFRL Project Work on EBM LSHR: Additive Manufacturing of High-Temperature Gamma-Prime Strengthened Ni-Based Superalloys

NASA Technical Reports Server (NTRS)

Sudbrack, Chantal K.; Kirka, Michael M.; Dehoff, Ryan R.; Carter, Robert W.; Semiatin, Sheldon L.; Gabb, Timothy P.

2016-01-01

Powder-bed fabrication of aerospace alloys may revolutionize production by eliminating the need for extensive machining and expensive tooling. Heated-bed electron-beam melting (EBM) offers advantages over non-heated laser additive manufacturing (AM) methods, including lower residual stress, reduced risk of contamination, slower cooling rates, and faster build times. NASA Glenn Research Center has joint project work with Oak Ridge National Lab and the Air Force Research Laboratory to explore the feasibility of fabricating advanced Ni-based gamma-prime superalloys with EBM AM.

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Force account work. 35.936-14 Section... Force account work. (a) A grantee must secure the project officer's prior written approval for use of the force account method for (1) any step 1 or step 2 work in excess of $10,000; (2) any sewer...

Training managers for high productivity: Guidelines and a case history

NASA Technical Reports Server (NTRS)

Ranftl, R. M.

1985-01-01

Hughes Aircrafts 13-year productivity study clearly identifies management as the key link in the entire productivity chain. This fact led to the establishment of a long-term series of seminars on personal, managerial, organizational, and operational productivity for all levels and sectors of line and staff management. To inspire the work force to higher levels of productivity and creativity management, itself, must first be inspired. In turn they have to clearly understand the productive and creative processes, fashion an effective productivity improvement plan with sound strategy and implementation, create an optimal environmental chemistry, and provide the outstanding leadership necessary to propel their organizations to achieve full potential. The primary goals of the seminars are to (1) ignite that spark of inspiration, enabling productive action to follow, (2) provide participants a credible roadmap and effective tools for implementation, and (3) develop a dedicated commitment to leadership and productivity throughout the management team.

Fertility and work-force participation: The experience of Melbourne Wives.

PubMed

Ware, H

1976-11-01

Summary Current and retrospective data on the fertility control, work-force participation intentions and practice of Melbourne wives are combined in an examination of the causal link between work-force participation and reduced family size. Stress is laid on the analysis of the interaction between work-force participation and fertility over time, taking into account the proportion of married life spent in the work-force, rather than relying exclusively on a measure of current participation, the only option available in the analysis of census-type data. The wide range of information available makes it possible to study the effects of work-force participation on wives of unimpaired fertility, as well as the different consequences of planned and unplanned participation, and of working in a variety of occupations and for a number of distinct reasons. Examination of the future fertility intentions and current contraceptive practice of the younger wives shows that working wives are not, in these respects, markedly different from their house-wife peers. Overall, the balance of the evidence indicates that in the majority of cases fertility influences work-force participation rather than the converse.

The labor force of the future.

PubMed

Norwood, J L

1987-07-01

In the decades ahead, the US labor force will reflect changes in the industrial structure, with declines in some manufacturing industries and expansion in service industries. The services sector is so diverse that the jobs within it cannot be categorized as either high wage or low wage. The service-producing sector employs 85% of professional specialty workers in the US. In general, information on compensation trends indicates that greater increases in compensation have occurred for workers in service-producing as opposed to goods-producing industries. The increase in service sector jobs has created opportunities for women to enter the labor force and, at present, 5 out of 6 women work in this sector compared to fewer than 2 out of 3 men. Productivity growth rates in the service-producing industries vary substantially and are strongly affected by the business cycle. Central to employment opportunities in the years ahead will be the effect of new technology. To date, the aggregate effect of new technology has been increased employment and higher living standards. Although retraining programs should be in place, the scenario of a huge technology-created labor surplus seems unlikely. In fact, a more likely problem is a shortage of labor resulting from earlier labor force withdrawal and demographic aging of the population. Those in the 25-54-year age group will represent a larger share of the labor force in the years ahead. In addition, blacks are expected to account for 20% of the labor force growth in the next decade. Finally, given increasing labor force participation rates among mothers, employers may have to provide more flexible work schedules, assistance with day care, and more attractive benefits packages.

Generation and use of human 3D-CAD models

NASA Astrophysics Data System (ADS)

Grotepass, Juergen; Speyer, Hartmut; Kaiser, Ralf

2002-05-01

Individualized Products are one of the ten mega trends of the 21st Century with human modeling as the key issue for tomorrow's design and product development. The use of human modeling software for computer based ergonomic simulations within the production process increases quality while reducing costs by 30- 50 percent and shortening production time. This presentation focuses on the use of human 3D-CAD models for both, the ergonomic design of working environments and made to measure garment production. Today, the entire production chain can be designed, individualized models generated and analyzed in 3D computer environments. Anthropometric design for ergonomics is matched to human needs, thus preserving health. Ergonomic simulation includes topics as human vision, reachability, kinematics, force and comfort analysis and international design capabilities. In German more than 17 billions of Mark are moved to other industries, because clothes do not fit. Individual clothing tailored to the customer's preference means surplus value, pleasure and perfect fit. The body scanning technology is the key to generation and use of human 3D-CAD models for both, the ergonomic design of working environments and made to measure garment production.

Ares I-X Range Safety Simulation Verification and Analysis IV and V

NASA Technical Reports Server (NTRS)

Tarpley, Ashley; Beaty, James; Starr, Brett

2010-01-01

NASA s ARES I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) flight data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual 91-710. Some products included in the flight data package were a nominal ascent trajectory, ascent flight envelope trajectories, and malfunction turn trajectories. These data are used by the Air Force s 45th Space Wing (45SW) to ensure Eastern Range public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data in regards to public safety and mission success, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. Multiple NASA centers and contractor organizations were assigned specific products to IV&V. The data generation and IV&V work was coordinated through the Launch Constellation Range Safety Panel s Trajectory Working Group, which included members from the prime and IV&V organizations as well as the 45SW. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures ARES I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for an RS product. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

76 FR 31365 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor... Contractor Certification as to Forced or Indentured Child Labor.'' This notice adds a product, hand-woven... of the List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child...

Work Force Information and Career-Technical Education. In Brief: Fast Facts for Policy and Practice No. 10.

ERIC Educational Resources Information Center

Sommers, Dixie

To prepare young people and adults for labor market success, career-technical education (CTE) practitioners must know how to find and use work force information. Recent federal legislation, including the Workforce Investment Act of 1998, underscores the importance of work force education. The nationwide work force information system makes data on…

A socioecological analysis of the determinants of national public health nutrition work force capacity: Australia as a case study.

PubMed

Hughes, Roger

2006-01-01

This article uses a socioecological analytical approach to assess the capacity of the public health nutrition work force in Australia as a prelude to work force development strategy planning. It demonstrates how the socioecological model can be used to assess and inform the development of the infrastructure required for effective public health nutrition effort. An interpretive case study method was used involving triangular analysis of quantitative and qualitative data from multiple sources including semistructured interviews with advanced-level practitioners, literature review, a cross-sectional national work force survey, and position description audit and consensus development using a Delphi study. The findings of this analysis indicate that the Australian public health nutrition work force's capacity to effectively address priority nutrition issues is limited by determinants that can be categorized as relating to human resource infrastructure, organizational and policy environments, intelligence access and use, practice improvement and learning systems, and work force preparation. This socioecological analysis supports an intelligence-based focus for work force development effort in Australia and a conceptual framework for work force capacity assessment with potential applications in other countries.

Target: Alcohol Abuse in the Hard-to-Reach Work Force. Ideas and Resources for Responding to Problems of the Hard-to-Reach Work Force.

ERIC Educational Resources Information Center

Informatics, Inc., Rockville, MD.

This guide is designed as a source of ideas and information for individuals and organizations interested in occupational alcoholism programs for the hard-to-reach work force. Following a brief overview of the problem and a report on progress in occupational alcoholism programming, a working definition of the hard-to-reach work force is offered;…

Determining Trajectory of Triboelectrically Charged Particles, Using Discrete Element Modeling

NASA Technical Reports Server (NTRS)

2008-01-01

The Kennedy Space Center (KSC) Electrostatics and Surface Physics Laboratory is participating in an Innovative Partnership Program (IPP) project with an industry partner to modify a commercial off-the-shelf simulation software product to treat the electrodynamics of particulate systems. Discrete element modeling (DEM) is a numerical technique that can track the dynamics of particle systems. This technique, which was introduced in 1979 for analysis of rock mechanics, was recently refined to include the contact force interaction of particles with arbitrary surfaces and moving machinery. In our work, we endeavor to incorporate electrostatic forces into the DEM calculations to enhance the fidelity of the software and its applicability to (1) particle processes, such as electrophotography, that are greatly affected by electrostatic forces, (2) grain and dust transport, and (3) the study of lunar and Martian regoliths.

Perception of force and stiffness in the presence of low-frequency haptic noise

PubMed Central

Gurari, Netta; Okamura, Allison M.; Kuchenbecker, Katherine J.

2017-01-01

Objective This work lays the foundation for future research on quantitative modeling of human stiffness perception. Our goal was to develop a method by which a human’s ability to perceive suprathreshold haptic force stimuli and haptic stiffness stimuli can be affected by adding haptic noise. Methods Five human participants performed a same-different task with a one-degree-of-freedom force-feedback device. Participants used the right index finger to actively interact with variations of force (∼5 and ∼8 N) and stiffness (∼290 N/m) stimuli that included one of four scaled amounts of haptically rendered noise (None, Low, Medium, High). The haptic noise was zero-mean Gaussian white noise that was low-pass filtered with a 2 Hz cut-off frequency; the resulting low-frequency signal was added to the force rendered while the participant interacted with the force and stiffness stimuli. Results We found that the precision with which participants could identify the magnitude of both the force and stiffness stimuli was affected by the magnitude of the low-frequency haptically rendered noise added to the haptic stimulus, as well as the magnitude of the haptic stimulus itself. The Weber fraction strongly correlated with the standard deviation of the low-frequency haptic noise with a Pearson product-moment correlation coefficient of ρ > 0.83. The mean standard deviation of the low-frequency haptic noise in the haptic stimuli ranged from 0.184 N to 1.111 N across the four haptically rendered noise levels, and the corresponding mean Weber fractions spanned between 0.042 and 0.101. Conclusions The human ability to perceive both suprathreshold haptic force and stiffness stimuli degrades in the presence of added low-frequency haptic noise. Future work can use the reported methods to investigate how force perception and stiffness perception may relate, with possible applications in haptic watermarking and in the assessment of the functionality of peripheral pathways in individuals with haptic impairments. PMID:28575068

Effect of Burnishing Parameters on Surface Finish

NASA Astrophysics Data System (ADS)

Shirsat, Uddhav; Ahuja, Basant; Dhuttargaon, Mukund

2017-08-01

Burnishing is cold working process in which hard balls are pressed against the surface, resulting in improved surface finish. The surface gets compressed and then plasticized. This is a highly finishing process which is becoming more popular. Surface quality of the product improves its aesthetic appearance. The product made up of aluminum material is subjected to burnishing process during which kerosene is used as a lubricant. In this study factors affecting burnishing process such as burnishing force, speed, feed, work piece diameter and ball diameter are considered as input parameters while surface finish is considered as an output parameter In this study, experiments are designed using 25 factorial design in order to analyze the relationship between input and output parameters. The ANOVA technique and F-test are used for further analysis.

USSR Report, Agriculture, No. 1375.

DTIC Science & Technology

1983-03-18

The entire republic extended a helping hand to the Issy-Kul’ residents. Skiers established communications with shepherds who were cut off...sought in all areas of agricul- tural production. Each working day is marked by the mobilization of all forces, knowledge and experience for...amount of precipita- tion did not stop the grain growers. They counteracted the caprices of the weather with a profound knowledge of agrotechnology and

Pathfinder. Volume 9, Number 1, January/February 2011

DTIC Science & Technology

2011-02-01

that users can access global foundation, imagery, product and activity layers online whenever and wherever they need to, much the way we access data...Professional Development Strengthening mission performance starts with an expert, diverse and collaborative global work force that rapidly shifts and...universities. The RAND study addressed two broad ques- tions: How future global development and trends result in new operational demands being placed on

Challenges in Designing U.S. Farm Policy. Issues in Agricultural Policy. Agriculture Information Bulletin Number 518.

ERIC Educational Resources Information Center

Lipton, Kathryn L.

Today, farming claims fewer members in the U.S. work force, and its share of the gross national product has substantially decreased. Yet farming remains important to the economy because of its links to a variety of industries. Extensive use of financial inputs has made farmers more vulnerable to fluctuations in the general economy, rising costs,…

Valuing and Managing Diversity in Business and Industry: Literature Review and Models. Training and Development Research Center Project Number Fifty-Nine.

ERIC Educational Resources Information Center

Johnson, Sandra J.

An increasingly diverse work force is a definite trend in the United States, and a number of companies have linked valuing and managing diversity to increased productivity. Equal employment opportunity and affirmative action are pointed to as foundational to the development of formal programs for valuing or managing diversity in the workplace. The…

Transition from the labor market: older workers and retirement.

PubMed

Peterson, Chris L; Murphy, Greg

2010-01-01

The new millennium has seen the projected growth of older populations as a source of many problems, not the least of which is how to sustain this increasingly aging population. Some decades ago, early retirement from work posed few problems for governments, but most nations are now trying to ensure that workers remain in the workforce longer. In this context, the role played by older employees can be affected by at least two factors: their productivity (or perceived productivity) and their acceptance by younger workers and management. If the goal of maintaining employees into older age is to be achieved and sustained, opportunities must be provided, for example, for more flexible work arrangements and more possibilities to pursue bridge employment (work after formal retirement). The retirement experience varies, depending on people's circumstances. Some people, for example, have retirement forced upon them by illness or injury at work, by ill-health (such as chronic illnesses), or by downsizing and associated redundancies. This article focuses on the problems and opportunities associated with working to an older age or leaving the workforce early, particularly due to factors beyond one's control.

Research on Liquid Management Technology in Water Tank and Reactor for Propulsion System with Hydrogen Production System Utilizing Aluminum and Water Reaction

NASA Astrophysics Data System (ADS)

Imai, Ryoji; Imamura, Takuya; Sugioka, Masatoshi; Higashino, Kazuyuki

2017-12-01

High pressure hydrogen produced by aluminum and water reaction is considered to be applied to space propulsion system. Water tank and hydrogen production reactor in this propulsion system require gas and liquid separation function under microgravity condition. We consider to install vane type liquid acquisition device (LAD) utilizing surface tension in the water tank, and install gas-liquid separation mechanism by centrifugal force which swirling flow creates in the hydrogen reactor. In water tank, hydrophilic coating was covered on both tank wall and vane surface to improve wettability. Function of LAD in water tank and gas-liquid separation in reaction vessel were evaluated by short duration microgravity experiments using drop tower facility. In the water tank, it was confirmed that liquid was driven and acquired on the outlet due to capillary force created by vanes. In addition of this, it was found that gas-liquid separation worked well by swirling flow in hydrogen production reactor. However, collection of hydrogen gas bubble was sometimes suppressed by aluminum alloy particles, which is open problem to be solved.

[Territory and decentralization in the agenda for productive transformation with equity].

PubMed

Sojo, A

1991-08-01

The regional perspective and the decentralization in Latin American and Caribbean countries was examined in light of technological changes and transformation of economic production to boost productivity. National population policies were not the major cause of redistribution of the population, rather such transformation significantly changed the comparative regional and urban advantages in the use of territory affecting the spatial distribution of the population. Hypotheses were advanced using the transformation of production, regional development, and decentralization on the retention, attraction, and migration of population in different areas with varying economic conditions. Spurious competitiveness means global strategies of enterprises that establish foreign operations by means of factor sourcing. Flexible specialization is a company strategy of permanent innovation based on flexible equipment and a qualified work force. The increasing transnationalization of capital is the source of skills and technology that sustain competitive advantages. Decentralization can resolve local demand, facilitate access to information, mobilize resources, and exercise control over local operations. In Japan, Germany, and Italy vs. the US and France there is a social contract among companies, trade unions, universities, and regional administrations in the interest of capital and the work force. There is no direct relationship between technology and region, the industrial cluster exhibits systemic competitiveness in developed countries (the Emilian model in Italy affirms the ability of small enterprises to develop new products), the regional impact is diverse relative to new technologies (some deprived rural economic areas have potential as in central and northern Italy), and population and region are linked (regional and rural-urban differences in the growth of population and migratory flows account for spatial distribution of the population). Decentralization and systemic competitiveness concern productivity and regional policies (spatial diversity for increased productivity) and technology and human resources are interdependent (technical progress is determined by the level of qualification of the population).

Assessing differences in hours worked between male and female dentists: an analysis of cross-sectional national survey data from 1979 through 1999.

PubMed

Walton, Surrey M; Byck, Gayle R; Cooksey, Judith A; Kaste, Linda M

2004-05-01

Women are increasingly entering the dental work force. This study examines the impact of sex, age and other demographic characteristics on dentists' work force participation and on hours worked from 1979 through 1999. The study drew on cross-sectional data on dentists (4,209 men and 354 women) from national population surveys conducted by the U.S. Bureau of Labor Statistics from 1979 through 1999. The authors used descriptive statistics and regression analyses to examine sex differences in work force participation and in hours worked across age, as well as other factors. Work force participation was high for both men and women. Men worked more hours and worked part time less frequently; they worked more than 42 hours per week more frequently. Older dentists worked fewer hours, with a larger impact of age seen among men. Having children had a significantly greater effect on the number of hours worked per week among female dentists than among male dentists. There were significant differences in dentists' hours worked by sex and by age. The consistency of the results with past studies suggests these differences will hold in the near future. Women's entry into the dental work force has been significant and has helped maintain the supply of dentists. Sex differences in the work force should be considered in evaluating the supply of dentists and related work force policy.

Environmental Assessment for the Replacement of a Vehicle Wash Rack, Travis Air Force Base, California

DTIC Science & Technology

2005-04-01

meet state and U.S. Air Force (Air Force) environmental requirements for the use of cleaning products and washing systems; comply with Air Force and...and O/WSs • Use environmentally compliant cleaning products and wash systems • Be equipped with a credit card reader or similar device, to document... cleaning products and washing systems, including operating a covered O/WS within design capacity limits • Comply with Air Force and Department of

The health and cost implications of high body mass index in Australian defence force personnel

PubMed Central

2012-01-01

Background Frequent illness and injury among workers with high body mass index (BMI) can raise the costs of employee healthcare and reduce workforce maintenance and productivity. These issues are particularly important in vocational settings such as the military, which require good physical health, regular attendance and teamwork to operate efficiently. The purpose of this study was to compare the incidence of injury and illness, absenteeism, productivity, healthcare usage and administrative outcomes among Australian Defence Force personnel with varying BMI. Methods Personnel were grouped into cohorts according to the following ranges for (BMI): normal (18.5 − 24.9 kg/m2; n = 197), overweight (25–29.9 kg/m2; n = 154) and obese (≥30 kg/m2) with restricted body fat (≤28% for females, ≤24% for males) (n = 148) and with no restriction on body fat (n = 180). Medical records for each individual were audited retrospectively to record the incidence of injury and illness, absenteeism, productivity, healthcare usage (i.e., consultation with medical specialists, hospital stays, medical investigations, prescriptions) and administrative outcomes (e.g., discharge from service) over one year. These data were then grouped and compared between the cohorts. Results The prevalence of injury and illness, cost of medical specialist consultations and cost of medical scans were all higher (p < 0.05) in both obese cohorts compared with the normal cohort. The estimated productivity losses from restricted work days were also higher (p < 0.05) in the obese cohort with no restriction on body fat compared with the normal cohort. Within the obese cohort, the prevalence of injury and illness, healthcare usage and productivity were not significantly greater in the obese cohort with no restriction on body fat compared with the cohort with restricted body fat. The number of restricted work days, the rate of re-classification of Medical Employment Classification and the rate of discharge from service were similar between all four cohorts. Conclusions High BMI in the military increases healthcare usage, but does not disrupt workforce maintenance. The greater prevalence of injury and illness, greater healthcare usage and lower productivity in obese Australian Defence Force personnel is not related to higher levels of body fat. PMID:22716068

Characteristics of personal health records: findings of the Medical Library Association/National Library of Medicine Joint Electronic Personal Health Record Task Force.

PubMed

Jones, Dixie A; Shipman, Jean P; Plaut, Daphne A; Selden, Catherine R

2010-07-01

The Medical Library Association (MLA)/National Library of Medicine (NLM) Joint Electronic Personal Health Record Task Force examined the current state of personal health records (PHRs). A working definition of PHRs was formulated, and a database was built with fields for specified PHR characteristics. PHRs were identified and listed. Each task force member was assigned a portion of the list for data gathering. Findings were recorded in the database. Of the 117 PHRs identified, 91 were viable. Almost half were standalone products. A number used national standards for nomenclature and/or record structure. Less than half were mobile device enabled. Some were publicly available, and others were offered only to enrollees of particular health plans or employees at particular institutions. A few were targeted to special health conditions. The PHR field is very dynamic. While most PHR products have some common elements, their features can vary. PHRs can link their users with librarians and information resources. MLA and NLM have taken an active role in making this connection and in encouraging librarians to assume this assistance role with PHRs.

How actin network dynamics control the onset of actin-based motility

PubMed Central

Kawska, Agnieszka; Carvalho, Kévin; Manzi, John; Boujemaa-Paterski, Rajaa; Blanchoin, Laurent; Martiel, Jean-Louis; Sykes, Cécile

2012-01-01

Cells use their dynamic actin network to control their mechanics and motility. These networks are made of branched actin filaments generated by the Arp2/3 complex. Here we study under which conditions the microscopic organization of branched actin networks builds up a sufficient stress to trigger sustained motility. In our experimental setup, dynamic actin networks or “gels” are grown on a hard bead in a controlled minimal protein system containing actin monomers, profilin, the Arp2/3 complex and capping protein. We vary protein concentrations and follow experimentally and through simulations the shape and mechanical properties of the actin gel growing around beads. Actin gel morphology is controlled by elementary steps including “primer” contact, growth of the network, entanglement, mechanical interaction and force production. We show that varying the biochemical orchestration of these steps can lead to the loss of network cohesion and the lack of effective force production. We propose a predictive phase diagram of actin gel fate as a function of protein concentrations. This work unveils how, in growing actin networks, a tight biochemical and physical coupling smoothens initial primer-caused heterogeneities and governs force buildup and cell motility. PMID:22908255

A robotic platform for studying sea lion thrust production

NASA Astrophysics Data System (ADS)

Leftwich, Megan; Patel, Rahi; Kulkarni, Aditya; Friedman, Chen

California Sea Lions are agile swimmers and, uniquely, use their foreflippers (rather than hind flipper undulation) to generate thrust. Recently, a sea lion flipper from a deceased subject was externally scanned in high detail for fluid dynamics research. The flipper's geometry is used in this work to build an accurate scaled down flipper model (approximately 68% of the full size span). The flipper model is placed in a water flume to obtain lift and drag force measurements. The unique trailing edge features are then examined for their effect on the measured forces by comparing to similar flipper models with a smooth trailing edge, sinusoidal trailing edge, and a saw-tooth trailing edge. Additionally, a robotic flipper is being designed and built, replicating the sea lion foreflipper anatomical structure. The robot is actuated by a set of servo motors and replicates the sea lion flipper clap motion based on previously extracted kinematics. The flipper tip speed is designed to match typical full scale Reynolds numbers for an acceleration from rest maneuver. The model is tested in the water flume as well to obtain the forces and flow structures during the thrust production phase of the flipper motion.

3 CFR - White House Task Force on Middle-Class Working Families

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false White House Task Force on Middle-Class Working... Task Force on Middle-Class Working Families Memorandum for the Heads of Executive Departments and... times. To these ends, I hereby direct the following: Section 1. White House Task Force on Middle-Class...

Stereoscopic image production: live, CGI, and integration

NASA Astrophysics Data System (ADS)

Criado, Enrique

2006-02-01

This paper shortly describes part of the experience gathered in more than 10 years of stereoscopic movie production, some of the most common problems found and the solutions, with more or less fortune, we applied to solve those problems. Our work is mainly focused in the entertainment market, theme parks, museums, and other cultural related locations and events. In our movies, we have been forced to develop our own devices to permit correct stereo shooting (stereoscopic rigs) or stereo monitoring (real-time), and to solve problems found with conventional film editing, compositing and postproduction software. Here, we discuss stereo lighting, monitoring, special effects, image integration (using dummies and more), stereo-camera parameters, and other general 3-D movie production aspects.

Using dictionaries to study the mental lexicon.

PubMed

Anshen, F; Aronoff, M

The notion of a mental lexicon has its historical roots in practical reference dictionaries. The distributional analysis of dictionaries provides one means of investigating the structure of the mental lexicon. We review our earlier work with dictionaries, based on a three-way horserace model of lexical access and production, and then present the most recent results of our ongoing analysis of the Oxford English Dictionary, Second Edition on CD-ROM, which traces changes in productivity over time of the English suffixes -ment and -ity, both of which originate in French borrowings. Our results lead us to question the validity of automatic analogy from a set of existing words as the driving force behind morphological productivity. Copyright 1999 Academic Press.

Surface forcing of non-stand-replacing fires in Siberian larch forests

NASA Astrophysics Data System (ADS)

Chen, Dong; Loboda, Tatiana V.

2018-04-01

Wildfires are the dominant disturbance agent in the Siberian larch forests. Extensive low- to mediate-intensity non-stand-replacing fires are a notable property of fire regime in these forests. Recent large scale studies of these fires have focused mostly on their impacts on carbon budget; however, their potential impacts on energy budget through post-fire albedo changes have not been considered. This study quantifies the post-fire surface forcing for Siberian larch forests that experienced non-stand-replacing fires between 2001 and 2012 using the full record of MODIS MCD43A3 albedo product and a burned area product developed specifically for the Russian forests. Despite a large variability, the mean effect of non-stand-replacing fires imposed through albedo is a negative forcing which lasts for at least 14 years. However, the magnitude of the forcing is much smaller than that imposed by stand-replacing fires, highlighting the importance of differentiating between the two fire types in the studies involving the fire impacts in the region. The results of this study also show that MODIS-based summer differenced normalized burn ratio (dNBR) provides a reliable metric for differentiating non-stand-replacing from stand-replacing fires with an overall accuracy of 88%, which is of considerable importance for future work on modeling post-fire energy budget and carbon budget in the region.

How Insects Initiate Flight: Computational Analysis of a Damselfly in Takeoff Flight

NASA Astrophysics Data System (ADS)

Bode-Oke, Ayodeji; Zeyghami, Samane; Dong, Haibo; Flow Simulation Research Group Team

2017-11-01

Flight initiation is essential for survival in biological fliers and can be classified into jumping and non-jumping takeoffs. During jumping takeoffs, the legs generate most of the initial impulse. Whereas the wings generate most of the forces in non-jumping takeoffs, which are usually voluntary, slow, and stable. It is of interest to understand how non-jumping takeoffs occur and what strategies insects use to generate the required forces. Using a high fidelity computational fluid dynamics simulation, we identify the flow features and compute the wing aerodynamic forces to elucidate how flight forces are generated by a damselfly performing a non-jumping takeoff. Our results show that a damselfly generates about three times its bodyweight during the first half-stroke for liftoff while flapping through a steeply inclined stroke plane and slicing the air at high angles of attack. Consequently, a Leading Edge Vortex (LEV) is formed during both the downstroke and upstroke on all the four wings. The formation of the LEV, however, is inhibited in the subsequent upstrokes following takeoff. Accordingly, we observe a drastic reduction in the magnitude of the aerodynamic force, signifying the importance of LEV in augmenting force production. This work was supported by National Science Foundation [CBET-1313217] and Air Force Research Laboratory [FA9550-12-1-007].

In vivo measurement of aerodynamic weight support in freely flying birds

NASA Astrophysics Data System (ADS)

Lentink, David; Haselsteiner, Andreas; Ingersoll, Rivers

2014-11-01

Birds dynamically change the shape of their wing during the stroke to support their body weight aerodynamically. The wing is partially folded during the upstroke, which suggests that the upstroke of birds might not actively contribute to aerodynamic force production. This hypothesis is supported by the significant mass difference between the large pectoralis muscle that powers the down-stroke and the much smaller supracoracoideus that drives the upstroke. Previous works used indirect or incomplete techniques to measure the total force generated by bird wings ranging from muscle force, airflow, wing surface pressure, to detailed kinematics measurements coupled with bird mass-distribution models to derive net force through second derivatives. We have validated a new method that measures aerodynamic force in vivo time-resolved directly in freely flying birds which can resolve this question. The validation of the method, using independent force measurements on a quadcopter with pulsating thrust, show the aerodynamic force and impulse are measured within 2% accuracy and time-resolved. We demonstrate results for quad-copters and birds of similar weight and size. The method is scalable and can be applied to both engineered and natural flyers across taxa. The first author invented the method, the second and third authors validated the method and present results for quadcopters and birds.

Influence of non-edible vegetable based oil as cutting fluid on chip, surface roughness and cutting force during drilling operation of Mild Steel

NASA Astrophysics Data System (ADS)

Susmitha, M.; Sharan, P.; Jyothi, P. N.

2016-09-01

Friction between work piece-cutting tool-chip generates heat in the machining zone. The heat generated reduces the tool life, increases surface roughness and decreases the dimensional sensitiveness of work material. This can be overcome by using cutting fluids during machining. They are used to provide lubrication and cooling effects between cutting tool and work piece and cutting tool and chip during machining operation. As a result, important benefits would be achieved such longer tool life, easy chip flow and higher machining quality in the machining processes. Non-edible vegetable oils have received considerable research attention in the last decades owing to their remarkable improved tribological characteristics and due to increasing attention to environmental issues, have driven the lubricant industry toward eco friendly products from renewable sources. In the present work, different non-edible vegetable oils are used as cutting fluid during drilling of Mild steel work piece. Non-edible vegetable oils, used are Karanja oil (Honge), Neem oil and blend of these two oils. The effect of these cutting fluids on chip formation, surface roughness and cutting force are investigated and the results obtained are compared with results obtained with petroleum based cutting fluids and dry conditions.

Validity and reliability of a controlled pneumatic resistance exercise device.

PubMed

Paulus, David C; Reynolds, Michael C; Schilling, Brian K

2008-01-01

During the concentric portion of the free-weight squat exercise, accelerating the mass from rest results in a fluctuation in ground reaction force. It is characterized by an initial period of force greater than the load while accelerating from rest followed by a period of force lower than the external load during negative acceleration. During the deceleration phase, less force is exerted and muscles are loaded sub-optimally. Thus, using a reduced inertia form of resistance such as pneumatics has the capability to minimize these inertial effects as well as control the force in real time to maximize the force exerted over the exercise cycle. To improve the system response of a preliminary design, a squat device was designed with a reduced mass barbell and two smaller pneumatic cylinders. The resistance was controlled by regulating cylinder pressure such that it is capable of adjusting force within a repetition to maximize force exerted during the lift. The resistance force production of the machine was statically validated with the input voltage and output force R2 =0.9997 for at four increments of the range of motion, and the intraclass correlation coefficient (ICC) between trials at the different heights equaled 0.999. The slew rate at three forces was 749.3 N/s +/- 252.3. Dynamic human subject testing showed the desired input force correlated with average and peak ground reaction force with R2 = 0.9981 and R2 = 0.9315, respectively. The ICC between desired force and average and peak ground reaction force was 0.963. Thus, the system is able to deliver constant levels of static and dynamic force with validity and reliability. Future work will be required to develop the control strategy required for real-time control, and performance testing is required to determine its efficacy.

Measuring and Enhancing Organizational Productivity: An Annotated Bibliography.

DTIC Science & Technology

1981-07-01

Repor for Peritod April 1 9811 - Jur. 19841 U R E S LABORATORY AIR FORCE SYSTEMS COMMAND BROOKS AIR FORCE BASETEXAS 78235 81 8 06060 NOTICE When U.S...personnel utilization, retention and productivity. To develop an effective force management system , research is needed to provide Air Force managers with...2) formal production incentive systems , (3) manpower planning, and (4) behavioral science and organizational design. He argues for developing

Predictive Capability of the Compressible MRG Equation for an Explosively Driven Particle with Validation

NASA Astrophysics Data System (ADS)

Garno, Joshua; Ouellet, Frederick; Koneru, Rahul; Balachandar, Sivaramakrishnan; Rollin, Bertrand

2017-11-01

An analytic model to describe the hydrodynamic forces on an explosively driven particle is not currently available. The Maxey-Riley-Gatignol (MRG) particle force equation generalized for compressible flows is well-studied in shock-tube applications, and captures the evolution of particle force extracted from controlled shock-tube experiments. In these experiments only the shock-particle interaction was examined, and the effects of the contact line were not investigated. In the present work, the predictive capability of this model is considered for the case where a particle is explosively ejected from a rigid barrel into ambient air. Particle trajectory information extracted from simulations is compared with experimental data. This configuration ensures that both the shock and contact produced by the detonation will influence the motion of the particle. The simulations are carried out using a finite volume, Euler-Lagrange code using the JWL equation of state to handle the explosive products. This work was supported by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program, as a Cooperative Agreement under the Predictive Science Academic Alliance Program,under Contract No. DE-NA0002378.

Variability in syringe components and its impact on functionality of delivery systems.

PubMed

Rathore, Nitin; Pranay, Pratik; Eu, Bruce; Ji, Wenchang; Walls, Ed

2011-01-01

Prefilled syringes and autoinjectors are becoming increasingly common for parenteral drug administration primarily due to the convenience they offer to the patients. Successful commercialization of such delivery systems requires thorough characterization of individual components. Complete understanding of various sources of variability and their ranking is essential for robust device design. In this work, we studied the impact of variability in various primary container and device components on the delivery forces associated with syringe injection. More specifically, the effects of barrel size, needle size, autoinjector spring force, and frictional forces have been evaluated. An analytical model based on underlying physics is developed that can be used to fully characterize the design space for a product delivery system. Use of prefilled syringes (syringes prefilled with active drug) is becoming increasingly common for injectable drugs. Compared to vials, prefilled syringes offer higher dose accuracy and ease of use due to fewer steps required for dosage. Convenience to end users can be further enhanced through the use of prefilled syringes in combination with delivery devices such as autoinjectors. These devices allow patients to self-administer the drug by following simple steps such as pressing a button. These autoinjectors are often spring-loaded and are designed to keep the needle tip shielded prior to injection. Because the needle is not visible to the user, such autoinjectors are perceived to be less invasive than syringes and help the patient overcome the hesitation associated with self-administration. In order to successfully develop and market such delivery devices, we need to perform an in-depth analysis of the components that come into play during the activation of the device and dose delivery. Typically, an autoinjector is activated by the press of a button that releases a compressed spring; the spring relaxes and provides the driving force to push the drug out of the syringe and into the site of administration. Complete understanding of the spring force, syringe barrel dimensions, needle size, and drug product properties is essential for robust device design. It is equally important to estimate the extent of variability that exists in these components and the resulting impact it could have on the performance of the device. In this work, we studied the impact of variability in syringe and device components on the delivery forces associated with syringe injection. More specifically, the effect of barrel size, needle size, autoinjector spring force, and frictional forces has been evaluated. An analytical model based on underlying physics is developed that can be used to predict the functionality of the autoinjector.

The retailing of health care.

PubMed

Paul, T; Wong, J

1984-01-01

A number of striking parallels between recent developments in health care marketing and changes in the retailing industry exist. The authors have compared retailing paradigms to the area on health care marketing so strategists in hospitals and other health care institutions can gain insight from these parallels. Many of the same economic, demographic, technological and lifestyle forces may be at work in both the health care and retail markets. While the services or products offered in health care are radically different from those of conventional retail markets, the manner in which the products and services are positioned, priced or distributed is surprisingly similar.

Amphibian research and monitoring initiative: Concepts and implementation

USGS Publications Warehouse

Corn, P.S.; Adams, M.J.; Battaglin, W.A.; Gallant, Alisa L.; James, D.L.; Knutson, M.; Langtimm, C.A.; Sauer, J.R.

2005-01-01

This report provides the basis for discussion and subsequent articulation of a national plan for the Amphibian Research and Monitoring Initiative (ARMI). The authors were members of a task force formed from within the U.S. Geological Survey (USGS) that included scientists with expertise in biology, cartography, hydrology, and statistics. The assignment of the task force was to extend work begun by the National Amphibian Leadership Group. This group, composed of senior USGS scientists, managers, and external authorities, met in Gainesville, Florida, in February 20001. The product of this meeting was a document outlining the framework for a national program to monitor amphibian populations and to conduct research into the causes of declines.

A split-crank bicycle ergometer uses servomotors to provide programmable pedal forces for studies in human biomechanics.

PubMed

Van der Loos, H F Machiel; Worthen-Chaudhari, Lise; Schwandt, Douglas; Bevly, David M; Kautz, Steven A

2010-08-01

This paper presents a novel computer-controlled bicycle ergometer, the TiltCycle, for use in human biomechanics studies of locomotion. The TiltCycle has a tilting (reclining) seat and backboard, a split pedal crankshaft to isolate the left and right loads to the feet of the pedaler, and two belt-driven, computer-controlled motors to provide assistance or resistance loads independently to each crank. Sensors measure the kinematics and force production of the legs to calculate work performed, and the system allows for goniometric and electromyography signals to be recorded. The technical description presented includes the mechanical design, low-level software and control algorithms, system identification and validation test results.

A potential method for lift evaluation from velocity field data

NASA Astrophysics Data System (ADS)

de Guyon-Crozier, Guillaume; Mulleners, Karen

2017-11-01

Computing forces from velocity field measurements is one of the challenges in experimental aerodynamics. This work focuses on low Reynolds flows, where the dynamics of the leading and trailing edge vortices play a major role in lift production. Recent developments in 2D potential flow theory, using discrete vortex models, have shown good results for unsteady wing motions. A method is presented to calculate lift from experimental velocity field data using a discrete vortex potential flow model. The model continuously adds new point vortices at leading and trailing edges whose circulations are set directly from vorticity measurements. Forces are computed using the unsteady Blasius equation and compared with measured loads.

Grasp Assist Device with Automatic Mode Control Logic

NASA Technical Reports Server (NTRS)

Laske, Evan (Inventor); Davis, Donald R. (Inventor); Ihrke, Chris A. (Inventor)

2018-01-01

A system includes a glove, sensors, actuator assemblies, and controller. The sensors include load sensors which measure an actual grasping force and attitude sensors which determine a glove attitude. The actuator assembly provides a grasp assist force to the glove. Respective locations of work cells in the work environment and permitted work tasks for each work cell are programmed into the controller. The controller detects the glove location and attitude. A work task is selected by the controller for the location. The controller calculates a required grasp assist force using measured actual grasping forces from the load sensors. The required grasp assist force is applied via the glove using the actuator assembly to thereby assist the operator in performing the identified work task.

State Workforce Policy Initiative.

ERIC Educational Resources Information Center

Public/Private Ventures, Philadelphia, PA.

Surging demand for workers, growing income inequality, and passage of welfare reforms have made work force development one of the United States' key national concerns. Public/Private Ventures has been working with various states to design work force development strategies that seek to address the concerns of many work force development specialists…

Comments on "The Cultural Conception and Structural Perpetuation of Female Subordination: an Examination of Gender Relations among the Populations of the Chalt-Chaprote Community in the Nager Valley of Northern Pakistan".

PubMed

Mujahid-mukhtar, E

1992-01-01

Commentary on the article on female subordination among the Chalt-Chaprote in northern Pakistan focused on the lack of uniqueness of the community profile and suggestions for improving the arguments. There were logical inconsistencies: that this community is no different in socioeconomic characteristics and in gender status from anywhere in Pakistan or southeast Asia. Access to formal education and health facilities is limited; there is low priority work, no decision making power, and a denial of rights of inheritance. This gender insubordination may not be due to the "gender hierarchy of supernatural forces." This community might be compared with another community which does not have the prevalent beliefs in the supernatural hierarchy. These beliefs in, for instance, the frailty of women may have been passed on in generations where bearing and rearing children meant dependence on men, which reinforced men's attitude of dominance. The second point made is that the calculation of women's productive work obfuscates the true picture of men and women's work; an example is given. The suggestion is to provide labor force participation rates. The final point is that men's only activities are excluded from the analysis and the focus is on agricultural and related activities. It would appear from the level of community development that there would be nonagricultural productive activity in the community: commerce, construction, teaching, and other services.

China Report: Economic Affairs, No. 358

DTIC Science & Technology

1983-06-28

represents a fundamental, material production department within the national economy. It provides fuel and motive power for every other sector of the nation...farm machines have become indispensable motive forces and tools in tapping the latent potential of production. Labor forces emancipated by the...play and production enthusiasm of peasants and resulting in strong self- motivated forces in agricultural production. Over the past 5 years, the province

Force and number of myosin motors during muscle shortening and the coupling with the release of the ATP hydrolysis products

PubMed Central

Caremani, Marco; Melli, Luca; Dolfi, Mario; Lombardi, Vincenzo; Linari, Marco

2015-01-01

The chemo-mechanical cycle of the myosin II–actin reaction in situ has been investigated in Ca2+-activated skinned fibres from rabbit psoas, by determining the number and strain (s) of myosin motors interacting during steady shortening at different velocities (V) and the effect of raising inorganic phosphate (Pi) concentration. It was found that in control conditions (no added Pi), shortening at V ≤ 350 nm s–1 per half-sarcomere, corresponding to force (T) greater than half the isometric force (T0), decreases the number of myosin motors in proportion to the reduction of T, so that s remains practically constant and similar to the T0 value independent of V. At higher V the number of motors decreases less than in proportion to T, so that s progressively decreases. Raising Pi concentration by 10 mm, which reduces T0 and the number of motors by 40–50%, does not influence the dependence on V of number and strain. A model simulation of the myosin–actin reaction in which the structural transitions responsible for the myosin working stroke and the release of the hydrolysis products are orthogonal explains the results assuming that Pi and then ADP are released with rates that increase as the motor progresses through the working stroke. The rate of ADP release from the conformation at the end of the working stroke is also strain-sensitive, further increasing by one order of magnitude within a few nanometres of negative strain. These results provide the molecular explanation of the relation between the rate of energy liberation and the load during muscle contraction. Key points Muscle contraction is due to cyclical ATP-driven working strokes in the myosin motors while attached to the actin filament. Each working stroke is accompanied by the release of the hydrolysis products, orthophosphate and ADP. The rate of myosin–actin interactions increases with the increase in shortening velocity. We used fast half-sarcomere mechanics on skinned muscle fibres to determine the relation between shortening velocity and the number and strain of myosin motors and the effect of orthophosphate concentration. A model simulation of the myosin–actin reaction explains the results assuming that orthophosphate and then ADP are released with rates that increase as the motor progresses through the working stroke. The ADP release rate further increases by one order of magnitude with the rise of negative strain in the final motor conformation. These results provide the molecular explanation of the relation between the rate of energy liberation and shortening velocity during muscle contraction. PMID:26041599

Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

Treesearch

Alex Wiedenhoeft

2006-01-01

Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

Air Force Academy Aeronautics Digest - Spring/Summer 1982.

DTIC Science & Technology

1983-03-01

Ben Rich, discusses the philosophy of advanced aircraft design and development that has made the "Skunk Works" so successful. Editorial Review by Capt...This Digest has been reviewed and is approved for publication. Thomas E. McCann, Lt. Colonel, USAF Director of Research and Continuing Education... review . Our thanks also to Associate Editor, Martha Arends, and Production Artist, Deborah Ross, of Contract Techical Services, Inc. *The first eight

Deterministic Intracellular Modeling

DTIC Science & Technology

2003-03-01

eukaryotes encompass all plants, animal, fungi and protists [6:71]. Structures in this class are more defined. For example, cells in this class possess a...affect cells. 5.3 Recommendations Further research into the construction and evaluation of intracellular models would benefit Air Force toxicology studies...manual220/indexE.html. 16. MathWorks, “The Benefits of MATLAB.” Internet, 2003. http://www.mathworks.com/products/matlab/description1.jsp. 17. Mendes

Alternative Energy Sources for United States Air Force Installations

DTIC Science & Technology

1975-08-01

easy to maintain, and have a relatively long life expectancy. b. Linear Focus Parabolic trough collectors have been fabricated by two primary methods...engineered and economically manufactured and dis- tributed solar collectors . Development, optimization, production design, and manufacture of these units is...193 and domestic hnt water heating. These systems function by converting the solar energy incident on a collector surface to thermal energy in a working

Motivational and Productivity Factors that Influence the Naval Construction Force

DTIC Science & Technology

1990-08-01

rework, unavailability of tools and equipment, disrespectful treatment, lack of recognition, little participation in decision-making, M 0 T I V A M(l...can be used by management as a motivating tool for workers. Herzberg recommends the following guidelines to for an effective job enrichment program...misconception is to focus solely on labor. One must consider all resources available within the work environment, including tools , equipment, materials

Labor force participation and human capital increases in an aging population and implications for U.S. research investment.

PubMed

Manton, Kenneth G; Lowrimore, Gene R; Ullian, Arthur D; Gu, Xiliang; Tolley, H Dennis

2007-06-26

The proportion of the United States labor force >/=65 years of age is projected to increase between 2004 and 2014 by the passing of age 65 of the large post-World War II baby boom cohorts starting in 2010 and their greater longevity, income, education, and health [Toossi M (2005) Mon Labor Rev 128(11):25-44]. The aging of the U.S. labor force will continue to at least 2034, when the largest of the baby boom cohorts reaches age 70. Thus, the average health and functional capacity of persons age 65+ must improve for sufficient numbers of elderly persons to be physically and cognitively capable of work. This will require greater investments in research, public health, and health care. We examine how disability declines and improved health may increase human capital at later ages and stimulate the growth of gross domestic product and national wealth.

Agricultural Work Force Households: How Much Do They Depend on Farming? Background for Agricultural Policy. Agriculture Information Bulletin Number 547.

ERIC Educational Resources Information Center

Cox, E. Jane; Oliveira, Victor J.

According to data from the 1985 Agricultural Work Force Survey, over 13.5 million of the 17.6 million agricultural work force household members (77 percent) lived in households headed by a farm worker. Some farm workers worked on the farm as their primary job, whereas others primarily worked off the farm. Farm work was an occasional form of…

Employer supports for parents with young children.

PubMed

Friedman, D E

2001-01-01

The competing interests of employers, working parents, and very young children collide in decisions over work schedules, child care arrangements, promotions, children's sicknesses, and overtime hours. With the rising number of women in the labor force, more and more employers are concerned about how their workers balance work and family priorities. This article examines the supports that employers provide to help parents with young children juggle demands on their time and attention. It reviews the availability of traditional benefits, such as vacation and health insurance, and describes family-friendly initiatives. Exciting progress is being made in this arena by leading employers, but coverage remains uneven: Employers say they provide family-friendly policies and programs to improve staff recruitment and retention, reduce absenteeism, and increase job satisfaction and company loyalty. Evaluations demonstrate positive impacts on each of these valued outcomes. Employee benefits and work/family supports seldom reach all layers of the work force, and low-income workers who need assistance the most are the least likely to receive or take advantage of it. Understandably, employer policies seek to maximize productive work time. However, it is often in the best interests of children for a parent to be able to set work aside to address urgent family concerns. The author concludes that concrete work/family supports like on-site child care, paid leave, and flextime are important innovations. Ultimately, the most valuable aid to employees would be a family-friendly workplace culture, with supportive supervision and management practices.

Past climates primary productivity changes in the Indian Ocean

NASA Astrophysics Data System (ADS)

Le Mézo, P. K.; Kageyama, M.; Bopp, L.; Beaufort, L.; Braconnot, P.; Bassinot, F. C.

2016-02-01

Organic climate recorders, e.g., coccolithophorids and foraminifera, are widely used to reconstruct past climate conditions, such as the Indian monsoon intensity and variability, since they are sensitive to climate-induced fluctuations of their environment. In the Indian Ocean, it is commonly accepted that a stronger summer monsoon will enhance productivity in the Arabian Sea and therefore the amount of organisms in a sediment core should reflect monsoon intensity. In this study, we use the coupled Earth System Model IPSLCM5A, which has a biogeochemical component PISCES that simulates primary production. We use 8 climate simulations of the IPSL-CM5A model, from -72kyr BP climate conditions to a preindustrial state. Our simulations have different orbital forcing (precession, obliquity and eccentricity), greenhouse gas concentrations as well as different ice sheet covers. The objective of this work is to characterize the mechanisms behind the changes in primary productivity between the different time periods. Our model shows that in climates where monsoon is enhanced (due to changes in precession) we do not necessarily see an increase in summer productivity in the Arabian Sea, and inversely. It seems that the glacial-interglacial state of the simulation is important in driving productivity changes in this region of the world. We try to explain the changes in productivity in the Arabian Sea with the local climate and then to link the changes in local climate to large scale atmospheric forcing and commonly used Indian monsoon definitions.

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Force account work. 35.936-14 Section... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.936-14 Force account work. (a) A grantee must secure the project officer's prior written approval for use of...

Diversity in the Work Force. The Highlight Zone: Research @ Work No. 4.

ERIC Educational Resources Information Center

Wentling, Rose Mary

A literature review was conducted to identify critical work force diversity issues in today's changing workplace and identify ways organizations and career and technical education (CTE) practitioners can increase work force diversity. A broad, all-inclusive definition of diversity was developed that focuses on how diversity affects individuals and…

78 FR 44158 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... List of Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor... Executive Order 13126 (``Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor... Federal Contractor Certification as to Forced or Indentured Child Labor Under 48 CFR Subpart 22.15 and E.O...

World and regional labour force trends and prospects.

PubMed

Ypsilantis, J N

1974-01-01

Changes in fertility during 1970-1985 will not have any effect on the composition of the world work force until 1985 because the people who will be of working age at that time have already been born. However, fertility for this period will directly influence the size of the age group 15-30 in the year 2000. Moreover, fertility trends for this period will have an indirect effect on participation of women in the labor force. The number of people in the labor force has proportionately followed total population. Just as total population is projected to increase in the single decade 1970-1980 by an amount equal to its size in 1750, so the labor force will increase by 360 million during the 1980's (its original size in 1750). By the end of the present century the world labor force may well number some 2,6000 million, reaching 3,000 million by the year 2010; 4,000 million by 2030; 5,000 million by 2070; and stabilizing at about 5,200 million by the end of the 21st century. There will be great regional variations. Increases will range from 20-35% in Europe and the U.S.S.R. to 100-120% in South Asia, Africa, and Latin America. For East Asia and North America the increases may amount to 60% by the year 2000 and 100% by 2050. In 1970 less developed regions had 2/3 the world's labor force; by 2000 they will have 3/4. In 1970 about 20% of the labor force in more developed regions were working in agriculture while in less developed regions 2/3 were so engaged. In other terms, in more developed regions 10 farmers supported 108 persons while in less developed regions 10 farmers supported only 38. According to Food and Agriculture Organization projections, by 2000 only 3.5% of the labor force in developed regions and 43.5% in less developed regions will be in agriculture. Differences in gross national product between regions is striking. In 1970 the less developed regions contained 70% of world population, 67% of the world labor force, 87% of the world agricultural labor, and produced 15% of its wealth. There are also sharp contrasts in participation in the labor force. In less developed countries more youths and older persons are in the labor force while in developed countries more women work. By the year 2000 female activity rates in more developed regions will increase for ages 20-64 and decrease for those under 20 and over 64. This will raise female participation in the labor force to 35%. In less developed regions female participation is expected to decline. The proportion of young workers is expected to increase in less developed and decline in more developed regions; the same will be true for older workers. The dependency burden will be concentrated among the young in less developed nations; in more devel oped regions there will be larger numbers of older dependents.

Quantitative investigation of hydraulic mixing energy input during batch mode anaerobic digestion and its impact on performance.

PubMed

McLeod, James; Othman, Maazuza Z; Parthasarathy, Rajarathinam

2018-05-26

The relationship between mixing energy input and biogas production was investigated by anaerobically digesting sewage sludge in lab scale, hydraulically mixed, batch mode digesters at six different specific energy inputs. The goal was to identify how mixing energy influenced digestion performance at quantitative levels to help explain the varying results in other published works. The results showed that digester homogeneity was largely uninfluenced by energy input, whereas cumulative biogas production and solids destruction were. With similar solids distributions between conditions, the observed differences were attributed to shear forces disrupting substrate-microbe flocs rather than the formation of temperature and/or concentration gradients. Disruption of the substrate-microbe flocs produced less favourable conditions for hydrolytic bacteria, resulting in less production of biomass and more biogas. Overall, this hypothesis explains the current body of research including the inhibitory conditions reported at extreme mixing power inputs. However, further work is required to definitively prove it. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of knee joint forces during kneeling work with different kneepads.

PubMed

Xu, Hang; Jampala, Sree; Bloswick, Donald; Zhao, Jie; Merryweather, Andrew

2017-01-01

The main purpose of this study is to determine knee joint forces resulting from kneeling work with and without kneepads to quantify how different kneepads redistribute force. Eleven healthy males simulated a tile setting task to different locations during six kneepad states (five different kneepad types and without kneepad). Peak and average forces on the anatomical landmarks of both knees were obtained by custom force sensors. The results revealed that kneepad design can significantly modify the forces on the knee joint through redistribution. The Professional Gel design was preferred among the five tested kneepads which was confirmed with both force measurements and participants' responses. The extreme reaching locations induced significantly higher joint forces on left knee or right knee depending on task. The conclusion of this study is that a properly selected kneepad for specific tasks and a more neutral working posture can modify the force distribution on the knees and likely decrease the risk of knee disorders from kneeling work. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rocket center Peenemünde — Personal memories

NASA Astrophysics Data System (ADS)

Dannenberg, Konrad; Stuhlinger, Ernst

Von Braun built his first rockets as a young teenager. At 14, he started making plans for rockets for human travel to the Moon and Mars. The German Army began a rocket program in 1929. Two years later, Colonel (later General) Becker contacted von Braun who experimented with rockets in Berlin, gave him a contract in 1932, and, jointly with the Air Force, in 1936 built the rocket center Peenemünde where von Braun and his team developed the A-4 (V-2) rocket under Army auspices, while the Air Force developed the V-1 (buzz bomb), wire-guided bombs, and rocket planes. Albert Speer, impressed by the work of the rocketeers, allowed a modest growth of the Peenemünde project; this brought Dannenberg to the von Braun team in 1940. Hitler did not believe in rockets; he ignored the A-4 project until 1942 when he began to support it, expecting that it could turn the fortunes of war for him. He drastically increased the Peenemünde work force and allowed the transfer of soldiers from the front to Peenemünde; that was when Stuhlinger, in 1943, came to Peenemünde as a Pfc.-Ph.D. Later that year, Himmler wrenched the authority over A-4 production out of the Army's hands, put it under his command, and forced production of the immature rocket at Mittelwerk, and its military deployment against targets in France, Belgium, and England. Throughout the development of the A-4 rocket, von Braun was the undisputed leader of the project. Although still immature by the end of the war, the A-4 had proceeded to a status which made it the first successful long-range precision rocket, the prototype for a large number of military rockets built by numerous nations after the war, and for space rockets that launched satellites and traveled to the Moon and the planets.

In Situ Roughness Measurements for the Solar Cell Industry Using an Atomic Force Microscope

PubMed Central

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production. PMID:22319338

In situ roughness measurements for the solar cell industry using an atomic force microscope.

PubMed

González-Jorge, Higinio; Alvarez-Valado, Victor; Valencia, Jose Luis; Torres, Soledad

2010-01-01

Areal roughness parameters always need to be under control in the thin film solar cell industry because of their close relationship with the electrical efficiency of the cells. In this work, these parameters are evaluated for measurements carried out in a typical fabrication area for this industry. Measurements are made using a portable atomic force microscope on the CNC diamond cutting machine where an initial sample of transparent conductive oxide is cut into four pieces. The method is validated by making a comparison between the parameters obtained in this process and in the laboratory under optimal conditions. Areal roughness parameters and Fourier Spectral Analysis of the data show good compatibility and open the possibility to use this type of measurement instrument to perform in situ quality control. This procedure gives a sample for evaluation without destroying any of the transparent conductive oxide; in this way 100% of the production can be tested, so improving the measurement time and rate of production.

Formability analysis of aluminum alloys through deep drawing process

NASA Astrophysics Data System (ADS)

Pranavi, U.; Janaki Ramulu, Perumalla; Chandramouli, Ch; Govardhan, Dasari; Prasad, PVS. Ram

2016-09-01

Deep drawing process is a significant metal forming process used in the sheet metal forming operations. From this process complex shapes can be manufactured with fewer defects. Deep drawing process has different effectible process parameters from which an optimum level of parameters should be identified so that an efficient final product with required mechanical properties will be obtained. The present work is to evaluate the formability of Aluminum alloy sheets using deep drawing process. In which effects of punch radius, lubricating conditions, die radius, and blank holding forces on deep drawing process observed for AA 6061 aluminum alloy sheet of 2 mm thickness. The numerical simulations are performed for deep drawing of square cups using three levels of aforesaid parameters like lubricating conditions and blank holding forces and two levels of punch radii and die radii. For numerical simulation a commercial FEM code is used in which Hollomon's power law and Hill's 1948 yield criterions are implemented. The deep drawing setup used in the FEM code is modeled using a CAD tool by considering the modeling requirements from the literature. Two different strain paths (150x150mm and 200x200mm) are simulated. Punch forces, thickness distributions and dome heights are evaluated for all the conditions. In addition failure initiation and propagation is also observed. From the results, by increasing the coefficient of friction and blank holding force, punch force, thickness distribution and dome height variations are observed. The comparison has done and the optimistic parameters were suggested from the results. From this work one can predict the formability for different strain paths without experimentation.

Design development scopes towards occupational wellness of women workers: specific reference to local agro based food processing industries in NE India.

PubMed

Bhattacharyya, Nandita; Chakrabarti, Debkumar

2012-01-01

Women workers constitute one of the most vulnerable segments of the country's labour force. They often face different workplace health challenges than men do. They are engaged in a range of work that extends from heavy, monotonous, repetitive jobs, which are in many times experienced with low-paid and involves in long hours of work. Women's workplace health problems are frequently compounded by getting more of the same at home--the "double jeopardy" of domestic work. Specific issues to improve the workers motivation leading to enhancement of productivity and improving occupational health and safety were addressed. Context specific application of ergonomics principles were studied in the process of designing of work related equipment of local fruit processing units, as well as in tea industry, covering 180 subjects selected purposively. Ergonomic risk factors prevailed among the workers associates productivity and relevant health issues were quantified using QEC, RULA. NMQ was used to gather data on prevalence of CTDs among the workers. Pineapple peeling, tea leaves plucking were found highly labour intensive, done manually. Postures scores found were very high. WRMSDs were prevalent among the workers. Scope for ergonomic design intervention was observed to improve productivity and occupational health.

The Work, the Workplace, and the Work Force of Tomorrow.

ERIC Educational Resources Information Center

Allen, Claudia

1995-01-01

Ann McLaughlin, a former secretary of labor, discusses her views on the future of the workplace. She feels that to solve the impending problem of educational deficits among the work force, employers will begin their own educational programs, improving both employee loyalty and work force mobility. Includes predictions for future growth fields.…

Adult mouse motor units develop almost all of their force in the subprimary range: a new all-or-none strategy for force recruitment?

PubMed

Manuel, Marin; Heckman, C J

2011-10-19

Classical studies of the mammalian neuromuscular system have shown an impressive adaptation match between the intrinsic properties of motoneurons and the contractile properties of their motor units. In these studies, the rate at which motoneurons start to fire repetitively corresponds to the rate at which individual twitches start to sum, and the firing rate increases linearly with the amount of excitation ("primary range") up to the point where the motor unit develops its maximal force. This allows for the gradation of the force produced by a motor unit by rate modulation. In adult mouse motoneurons, however, we recently described a regime of firing ("subprimary range") that appears at lower excitation than what is required for the primary range, a finding that might challenge the classical conception. To investigate the force production of mouse motor units, we simultaneously recorded, for the first time, the motoneuron discharge elicited by intracellular ramps of current and the force developed by its motor unit. We showed that the motor unit developed nearly its maximal force during the subprimary range. This was found to be the case regardless of the input resistance of the motoneuron, the contraction speed, or the tetanic force of the motor unit. Our work suggests that force modulation in small mammals mainly relies on the number of motor units that are recruited rather than on rate modulation of individual motor units.

Europe, women, and work: is the "adult worker" ideal achieved?

PubMed

Montanari, Ingalill

2009-01-01

Against the background of an overall increase in female labor force participation in Europe, this article presents a comparative analysis of the development of the extent and quality of women's participation in market work over the last 15 years in relation to selected sectoral and, with regard to the service sector, subsectoral sites in which women perform their market work. This is an explorative test of the utility of the theoretical perspective that focuses on the gendered division of total necessary work in society, production as well as reproduction, in order to explain gender inequality. Countries examined are the "old E.U." member states in various constellations. Data from the Organization for Economic Cooperation and Development, International Labor Organization, European Social Survey, and Luxembourg Income Study are used.

Final Environmental Assessment: For Construction of a Security Forces Complex on Eglin Air Force Base, FL

DTIC Science & Technology

2005-05-01

form of weapons cleaning products and wastes. State of Florida and Air Force regulations have been implemented 05/31/05 Final Environmental Assessment...Forces Complex will generate hazardous materials in the form of weapons cleaning products and wastes. Break-Free CLP Liquid is a cleaner, lubricant

Influence of Emotion on the Control of Low-Level Force Production

ERIC Educational Resources Information Center

Naugle, Kelly M.; Coombes, Stephen A.; Cauraugh, James H.; Janelle, Christopher M.

2012-01-01

The accuracy and variability of a sustained low-level force contraction (2% of maximum voluntary contraction) was measured while participants viewed unpleasant, pleasant, and neutral images during a feedback occluded force control task. Exposure to pleasant and unpleasant images led to a relative increase in force production but did not alter the…

Ertl and Non-Ertl amputees exhibit functional biomechanical differences during the sit-to-stand task.

PubMed

Ferris, Abbie E; Christiansen, Cory L; Heise, Gary D; Hahn, David; Smith, Jeremy D

2017-05-01

People with transtibial amputation stand ~50times/day. There are two general approaches to transtibial amputation: 1) distal tibia and fibula union using a "bone-bridge" (Ertl), 2) non-union of the tibia and fibula (Non-Ertl). The Ertl technique may improve functional outcomes by increasing the end-bearing ability of the residual limb. We hypothesized individuals with an Ertl would perform a five-time sit-to-stand task faster through greater involvement/end-bearing of the affected limb. Ertl (n=11) and Non-Ertl (n=7) participants sat on a chair with each foot on separate force plates and performed the five-time sit-to-stand task. A symmetry index (intact vs affected limbs) was calculated using peak ground reaction forces. The Ertl group performed the task significantly faster (9.33s (2.66) vs 13.27 (2.83)s). Symmetry index (23.33 (23.83)% Ertl, 36.53 (13.51)% Non-Ertl) indicated the intact limb for both groups produced more force than the affected limb. Ertl affected limb peak ground reaction forces were significantly larger than the Non-Ertl affected limb. Peak knee power and net work of the affected limb were smaller than their respective intact limb for both groups. The Ertl intact limb produced significantly greater peak knee power and net work than the Non-Ertl intact knee. Although loading asymmetries existed between the intact and affected limb of both groups, the Ertl group performed the task ~30% faster. This was driven by greater power and work production of the Ertl intact limb knee. Our results suggest that functional differences exist between the procedures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biogeographic and ecological regulation of disease: Prevalence of Sin Nombre virus in island mice is related to island area, precipitation, and predator richness

USGS Publications Warehouse

Orrock, John L.; Allan, Brian F.; Drost, Charles A.

2011-01-01

The relative roles of top-down and bottom-up forces in affecting disease prevalence in wild hosts is important for understanding disease dynamics and human disease risk. We found that the prevalence of Sin Nombre virus (SNV), the agent of a severe disease in humans (hantavirus pulmonary syndrome), in island deer mice from the eight California Channel Islands was greater with increased precipitation (a measure of productivity), greater island area, and fewer species of rodent predators. In finding a strong signal of the ecological forces affecting SNV prevalence, our work highlights the need for future work to understand the relative importance of average rodent density, population fluctuations, behavior, and specialist predators as they affect SNV prevalence. In addition to illustrating the importance of both bottom-up and top-down limitation of disease prevalence, our results suggest that predator richness may have important bearing on the risk of exposure to animal-borne diseases that affect humans.

What is the Meaning of the Physical Magnitude `Work'?

NASA Astrophysics Data System (ADS)

Kanderakis, Nikos

2014-06-01

Usually, in physics textbooks, the physical magnitude `work' is introduced as the product of a force multiplied by its displacement, in relation to the transfer of energy. In other words, `work' is presented as an internal affair of physics theory, while its relation to the world of experience, that is its empirical meaning, is missing. On the other hand, in the history of its creation, `work' was a concept that had empirical meaning from the start. It was constructed by engineers to measure the work (labor) of motor engines, men, and animals. Very soon however this initial meaning seems to vanish. In this article, it will be looked at how `work' is presented in physics textbooks, what was its initial meaning in the history of its formulation, under what circumstances this initial meaning faded, and how elements from the history of its creation can be used in the classroom to teach it.

Sexual harassment at work place: are you safe?

PubMed

Naveed, Anila; Tharani, Ambreen; Alwani, Nasreen

2010-01-01

In today's world women are increasingly participating in the realm of work force, yet they are facing many obstacles in their way. Sexual harassment is one of those obstacles. Sexual harassment at work place is prevalent in every society. It could happen to anyone but women are the targeted victims. Sexual harassment is considered as a traumatic event and the victim may end up in having physical and mental sufferings that hinders a person to work effectively. At an organisational level this may result in decrease work effectiveness, decreased work productivity, high absenteeism, high turnover, and low staff morale. Hence there is a need that, organisations and government should look seriously into this matter. Proper education and training programs should be developed to deal with these issues. The goal must be both to deal with sexual harassment incidents effectively and to prevent the occurrence of future incidents.

Facial expressions and speech acts: experimental evidences on the role of the upper face as an illocutionary force indicating device in language comprehension.

PubMed

Domaneschi, Filippo; Passarelli, Marcello; Chiorri, Carlo

2017-08-01

Language scientists have broadly addressed the problem of explaining how language users recognize the kind of speech act performed by a speaker uttering a sentence in a particular context. They have done so by investigating the role played by the illocutionary force indicating devices (IFIDs), i.e., all linguistic elements that indicate the illocutionary force of an utterance. The present work takes a first step in the direction of an experimental investigation of non-verbal IFIDs because it investigates the role played by facial expressions and, in particular, of upper-face action units (AUs) in the comprehension of three basic types of illocutionary force: assertions, questions, and orders. The results from a pilot experiment on production and two comprehension experiments showed that (1) certain upper-face AUs seem to constitute non-verbal signals that contribute to the understanding of the illocutionary force of questions and orders; (2) assertions are not expected to be marked by any upper-face AU; (3) some upper-face AUs can be associated, with different degrees of compatibility, with both questions and orders.

Bidirectional transfer between joint and individual actions in a task of discrete force production.

PubMed

Masumoto, Junya; Inui, Nobuyuki

2017-07-01

The present study examined bidirectional learning transfer between joint and individual actions involving discrete isometric force production with the right index finger. To examine the effects of practice of joint action on performance of the individual action, participants performed a pre-test (individual condition), practice blocks (joint condition), and a post-test (individual condition) (IJI task). To examine the effects of practice of the individual action on performance during the joint action, the participants performed a pre-test (joint condition), practice blocks (individual condition), and a post-test (joint condition) (JIJ task). Whereas one participant made pressing movements with a target peak force of 10% maximum voluntary contraction (MVC) in the individual condition, two participants produced the target force of the sum of 10% MVC produced by each of them in the joint condition. In both the IJI and JIJ tasks, absolute errors and standard deviations of peak force were smaller post-test than pre-test, indicating bidirectional transfer between individual and joint conditions for force accuracy and variability. Although the negative correlation between forces produced by two participants (complementary force production) became stronger with practice blocks in the IJI task, there was no difference between the pre- and post-tests for the negative correlation in the JIJ task. In the JIJ task, the decrease in force accuracy and variability during the individual action did not facilitate complementary force production during the joint action. This indicates that practice performed by two people is essential for complementary force production in joint action.

Effects of Jaw Clenching and Jaw Alignment Mouthpiece Use on Force Production During Vertical Jump and Isometric Clean Pull.

PubMed

Allen, Charles R; Fu, Yang-Chieh; Cazas-Moreno, Vanessa; Valliant, Melinda W; Gdovin, Jacob R; Williams, Charles C; Garner, John C

2018-01-01

Allen, CR, Fu, Y-C, Cazas-Moreno, V, Valliant, MW, Gdovin, JR, Williams, CC, and Garner, JC. Effects of jaw clenching and jaw alignment mouthpiece use on force production during vertical jump and isometric clean pull. J Strength Cond Res 32(1): 237-243, 2018-This study examined the effects of jaw clenching, a self-adapted, jaw-repositioning mouthpiece on force production during maximum countermovement vertical jump and maximum isometric midthigh clean pull assessments in an attempt to determine any ergogenic effect attributable to clenching, jaw-repositioning mouthpiece use, or the combination of both. Thirty-six male subjects performed vertical jump and isometric clean pull assessments from a force platform under various mouthpiece and clench conditions. A 3 × 2 (mouthpiece × clench) repeated-measures analysis of variance was conducted to analyze each of the following force production variables for both assessments: peak force, normalized peak force, and rate of force development. In addition, jump height was analyzed for the vertical jump. Results revealed improvements in peak force (F1,35 = 15.84, p ≤ 0.001, (Equation is included in full-text article.)= 0.31), normalized peak force (F1,35 = 16.28, p ≤ 0.001, (Equation is included in full-text article.)= 0.32), and rate of force development (F1,35 = 12.89, p = 0.001, (Equation is included in full-text article.)= 0.27) during the isometric clean pull assessment when participants maximally clenched their jaw, regardless of mouthpiece condition. There were no statistically significant differences in jump height, peak force, normalized peak force, or rate of force development during the vertical jump for any treatment condition. This study supports previous research demonstrating that the implementation of remote voluntary contractions such as jaw clenching can lead to concurrent activation potentiation and a resulting ergogenic effect during activities involving and requiring high-force production.

JPRS Report China

DTIC Science & Technology

1990-02-12

military support for the Nicaraguan antigovernment (Contra) forces, generating hope that the " fast knot" in U.S.-Nicaraguan relations can be untied...outpaced the public portion. There is no need to worry no matter how much faster it is growing. What we must be concerned with is not how fast it is...nonferrous metals were smaller. Some that only had a few days of production capacity worked intermittently . Some of the larger, newly opened enterprises

The Role of the Founder in the Creation of Organizational Culture.

DTIC Science & Technology

1983-01-01

090S 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA G WORK UNIT NUMBERS Sloan School of Management Massachusetts...founders were obsessed with product quality and had a hard time seeing how some of their own managerial demands could undermine quality by forcing... employees , but these employees will, as they move up in the organization and become experienced managers , develop a range of new assumptions which

Developing customer databases.

PubMed

Rao, S K; Shenbaga, S

2000-01-01

There is a growing consensus among pharmaceutical companies that more product and customer-specific approaches to marketing and selling a new drug can result in substantial increases in sales. Marketers and researchers taking a proactive micro-marketing approach to identifying, profiling, and communicating with target customers are likely to facilitate such approaches and outcomes. This article provides a working framework for creating customer databases that can be effectively mined to achieve a variety of such marketing and sales force objectives.

International Naval Technology Transfer: Lessons Learned from the Spanish and Chilean Shipbuilding Experience

DTIC Science & Technology

2012-04-30

immediately following (Alvarez-Maldonado Muela, 1997, pp. 37–43; Molas -Gallart, 1995, pp. 46–47). Instead, Spain turned to Germany for technical...capability and training the production work force (Castillo Masete, 1990, p. 118; Molas - Gallart, 1990, pp. 353–354). After the death of Franco in...created to coordinate armament procurement and budgeting, allowing for the creation of a uniform defense industrial policy ( Molas -Gallart, 1995, pp

Translations on Eastern Europe Political, Sociological, and Military Affairs No. 1359.

DTIC Science & Technology

1977-03-01

of the development of productive forces, science and technology and cannot ensure the right to work, an increase in the standard of living and the...winning of international peace and security. In this struggle the chief tool, in addition to political enlight - enment activity, is the organization...development of the trade exchange and to find and utilize new forms of cooperation in the economy, science, technology and culture. Mr Prime Minister

The Future of Air Force Motion Imagery Exploitation: Lessons from the Commercial World

DTIC Science & Technology

2012-01-01

works during the filming of the show, the primary exception 14 Although not the first of its kind, the breakthrough program for this genre on U.S...recent genre of popular television pro- gramming that relies on the unscripted performances of people who are not professional actors (the cast...reality television production crews; such moments, from which the genre derives its name, are often prominently featured in reality television

48 CFR 622.1503 - Procedures for acquiring end products on the List of Products Requiring Contractor Certification...

Code of Federal Regulations, 2010 CFR

2010-10-01

... end products on the List of Products Requiring Contractor Certification as to Forced or Indentured... List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor. (e) The... manufacture an end product furnished pursuant to a contract awarded subject to the certification required in...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

Education in Basic Skills and Training for Productive Work

NASA Astrophysics Data System (ADS)

Labarca, Guillermo

1998-09-01

The success of global policies and strategies aimed at training for productive work depends to a large extent on the level of development of basic skills among the work force and, likewise, training costs will vary according to the level of general preparation of those entering on the process. In view of the close relationship between the structure of the school system, the development of basic skills and actual training, different options are available to resolve imbalances between training for productive employment and previous basic education. Our conclusions are that training cannot replace basic education, that the process of technological change goes hand in hand with an increased demand for workers with a high level of education, that substituting training in specific skills for good basic education is not the most efficient option, and that one of the favorable effects of primary education is that it facilitates after- school training. This article seeks to identify certain dimensions of human resource training which are often overlooked in relation to both basic skills and specific training proper: namely, the imbalances existing between vocational training and previous education, and the options available for correcting them.

The Burden of Poor Mental Well-being Among Patients With Type 2 Diabetes Mellitus

PubMed Central

Bolge, Susan C.; Flores, Natalia M.; Phan, Jennifer H.

2016-01-01

Objective: The aim of this study was to evaluate the association of mental well-being with outcomes among patients with type 2 diabetes mellitus (T2DM). Methods: Seven thousand eight hundred fifty-two adults with T2DM were identified from a national, Internet-based study. Mental well-being [SF-36v2 mental component summary (MCS)] was categorized as good (MCS ≥ 50), poor (40 ≤ MCS < 50), and very poor (MCS < 40). Outcomes included past 6 months of health care resource use and lost productivity (Work Productivity and Activity Impairment questionnaire). Results: Respondents with very poor/poor versus good mental well-being were more likely to visit the emergency room (27%/18% vs 11%, P < 0.001) or be hospitalized (19%/14% vs 9%, P < 0.001). Among labor force participants, those with very poor/poor versus good mental well-being experienced greater overall work impairment (43.7/26.0 vs 10.7, P < 0.001). Conclusions: Greater resource use and work productivity impairment associated with poorer mental well-being among patients with T2DM has cost implications. PMID:27820762

Internal Aspects of the Skill Transfer of Manual Assembly Work

ERIC Educational Resources Information Center

Doyo, Daisuke

2009-01-01

In manual assembly work, parts are often assembled by applying force with a simple tool or by hand. A worker thus needs control the force he or she applies in working, as an appropriate level of force is requisite for minimizing work failures and improving efficiency. The object of this study is to clarify the relationship between the level of…

Portfolio theory of optimal isometric force production: Variability predictions and nonequilibrium fluctuation dissipation theorem

NASA Astrophysics Data System (ADS)

Frank, T. D.; Patanarapeelert, K.; Beek, P. J.

2008-05-01

We derive a fundamental relationship between the mean and the variability of isometric force. The relationship arises from an optimal collection of active motor units such that the force variability assumes a minimum (optimal isometric force). The relationship is shown to be independent of the explicit motor unit properties and of the dynamical features of isometric force production. A constant coefficient of variation in the asymptotic regime and a nonequilibrium fluctuation-dissipation theorem for optimal isometric force are predicted.

Employment in Perspective: Women in the Labor Force. Third Quarter 1988. Report 758.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

The female share of the older work force has nearly doubled since 1950. In 1987, the 6.2 million women aged 55 and over in the labor force constituted 4 of every 10 older workers. Because young women today have a stronger work attachment than did their mothers and grandmothers, the female share of the older work force is likely to continue to…

Evaluation of Container Closure System Integrity for Storage of Frozen Drug Products: Impact of Capping Force and Transportation.

PubMed

Nieto, Alejandra; Roehl, Holger; Adler, Michael; Mohl, Silke

2018-05-31

Frozen-state storage and cold-chain transport are key operations in the development and commercialization of biopharmaceuticals. Nowadays, a few marketed drug products are stored (and/or) shipped under frozen conditions to ensure sufficient stability, particularly for live viral vaccines. When these products are stored in glass vials with stoppers, the elastomer of the stopper needs to be flexible enough to seal the vial at the target's lowest temperature to ensure container closure integrity and hence both sterility and safety of the drug product. The container closure integrity assessment in the frozen state (e.g., -20°C, -80°C) should include: Container Closure Integrity (CCI) of the Container Closure System (CCS) itself, impact of processing, e.g. capping process on CCI and impact of shipment and movement on CCI in the frozen state. The objective of this work was an evaluation of the impact of processing and shipment on CCI of a CCS in the frozen state. The impact on other quality attributes was not investigated. In this light, the ThermCCI method was applied to evaluate the impact of shipping stress and variable capping force on CCI of frozen vials and to evaluate the temperature limits of rubber stoppers. In conclusion, retaining CCI during cold storage is mostly a function of vial-stopper combination and temperatures below -40°C may pose a risk to the CCI of a frozen drug product. Variable capping force may have an influence on the CCI of a frozen drug product if not appropriately assessed. Regarding the impact of shipment on the CCI of glass vials, no indication was given either at room temperature, -20°C or -75°C when compared to static storage at such temperatures. Copyright © 2018, Parenteral Drug Association.

Verifying Air Force Weather Passive Satellite Derived Cloud Analysis Products

NASA Astrophysics Data System (ADS)

Nobis, T. E.

2017-12-01

Air Force Weather (AFW) has developed an hourly World-Wide Merged Cloud Analysis (WWMCA) using imager data from 16 geostationary and polar-orbiting satellites. The analysis product contains information on cloud fraction, height, type and various optical properties including optical depth and integrated water path. All of these products are derived using a suite of algorithms which rely exclusively on passively sensed data from short, mid and long wave imager data. The system integrates satellites with a wide-range of capabilities, from the relatively simple two-channel OLS imager to the 16 channel ABI/AHI to create a seamless global analysis in real time. Over the last couple of years, AFW has started utilizing independent verification data from active sensed cloud measurements to better understand the performance limitations of the WWMCA. Sources utilized include space based lidars (CALIPSO, CATS) and radar (CloudSat) as well as ground based lidars from the Department of Energy ARM sites and several European cloud radars. This work will present findings from our efforts to compare active and passive sensed cloud information including comparison techniques/limitations as well as performance of the passive derived cloud information against the active.

Dissipation of contractile forces: the missing piece in cell mechanics.

PubMed

Kurzawa, Laetitia; Vianay, Benoit; Senger, Fabrice; Vignaud, Timothée; Blanchoin, Laurent; Théry, Manuel

2017-07-07

Mechanical forces are key regulators of cell and tissue physiology. The basic molecular mechanism of fiber contraction by the sliding of actin filament upon myosin leading to conformational change has been known for decades. The regulation of force generation at the level of the cell, however, is still far from elucidated. Indeed, the magnitude of cell traction forces on the underlying extracellular matrix in culture is almost impossible to predict or experimentally control. The considerable variability in measurements of cell-traction forces indicates that they may not be the optimal readout to properly characterize cell contractile state and that a significant part of the contractile energy is not transferred to cell anchorage but instead is involved in actin network dynamics. Here we discuss the experimental, numerical, and biological parameters that may be responsible for the variability in traction force production. We argue that limiting these sources of variability and investigating the dissipation of mechanical work that occurs with structural rearrangements and the disengagement of force transmission is key for further understanding of cell mechanics. © 2017 Kurzawa et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Evaluation of Force Degradation Pattern of Elastomeric Ligatures and Elastomeric Separators in Active Tieback State.

PubMed

Mohammadi, Amir; Mahmoodi, Farhang

2015-01-01

Background and aims. The purpose of this study was to evaluate initial force and force decay of commercially available elastomeric ligatures and elastomeric separators in active tieback state in a simulated oral environment. Materials and methods. A total of 288 elastomeric ligatures and elastomeric separators from three manufacturers (Dentaurum, RMO, 3M Unitek) were stretched to 100% and 150% of their original inner diameter. Force levels were measured initially and at 3-minute, 24-hour, and 1-, 2-, 3- and 4-week intervals. Data were analyzed by univariate analysis of variance and a post hoc Tukey test. Results. The means of initial forces of elastomeric ligatures and separators from three above-mentioned companies, when stretched to 100% of their inner diameters, were 199, 305 and 284 g, and 330, 416, 330 g; when they were stretched to 150% of their inner diameters the values were 286, 422 and 375 g, and 433, 540 and 504 g, respectively. In active tieback state, 11-18% of the initial force of the specimens was lost within the first 3 minutes and 29-63% of the force decay occurred in the first 24 hours; then force decay rate decreased. 62-81% of the initial force was lost in 4 weeks. Although force decay pattern was identical in all the products, the initial force and force decay of Dentaurum elastomeric products were less than the similar products of other companies (P<0.05). Under the same conditions, the force of elastomeric separators was greater than elastomeric ligatures of the same company. Conclusion. Regarding the force pattern of elastomeric ligatures and separators and optimal force for tooth movement, many of these products can be selected for applying orthodontic forces in active tieback state.

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

Honeywell's Working Parents Task Force. Final Report and Recommendations.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

This publication provides a summary of the Honeywell Working Parent Task Force's recommendations on how to solve problems experienced by working parents. The Task Force consisted of three committees: the Employment Practices Committee (EPC); the Parent Education Committee (PEC); and the Child Care Facilities Committee (CCFC). After examining a…

Workforce Education: Issues for the New Century.

ERIC Educational Resources Information Center

Pautler, Albert J., Jr.

This paper is intended to guide small groups of vocational educators in discussions regarding work force education issues for the next century. The following work force issues are suggested: the aging work force; vocational education's role in reforming K-12 education; distance education for technical education programs; the labor shortages…

78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Air Force... Control Working Group (SSCWG) meeting on 6 December 2013 from 0900-1300 PST at Los Angeles Air Force Base...

Active shortening protects against stretch-induced force deficits in human skeletal muscle.

PubMed

Saripalli, Anjali L; Sugg, Kristoffer B; Mendias, Christopher L; Brooks, Susan V; Claflin, Dennis R

2017-05-01

Skeletal muscle contraction results from molecular interactions of myosin "crossbridges" with adjacent actin filament binding sites. The binding of myosin to actin can be "weak" or "strong," and only strong binding states contribute to force production. During active shortening, the number of strongly bound crossbridges declines with increasing shortening velocity. Forcibly stretching a muscle that is actively shortening at high velocity results in no apparent negative consequences, whereas stretch of an isometrically (fixed-length) contracting muscle causes ultrastructural damage and a decline in force-generating capability. Our working hypothesis is that stretch-induced damage is uniquely attributable to the population of crossbridges that are strongly bound. We tested the hypothesis that stretch-induced force deficits decline as the prevailing shortening velocity is increased. Experiments were performed on permeabilized segments of individual skeletal muscle fibers obtained from human subjects. Fibers were maximally activated and allowed either to generate maximum isometric force (F o ), or to shorten at velocities that resulted in force maintenance of ≈50% F o or ≈2% F o For each test condition, a rapid stretch equivalent to 0.1 × optimal fiber length was applied. Relative to prestretch F o , force deficits resulting from stretches applied during force maintenance of 100, ≈50, and ≈2% F o were 23.2 ± 8.6, 7.8 ± 4.2, and 0.3 ± 3.3%, respectively (means ± SD, n = 20). We conclude that stretch-induced damage declines with increasing shortening velocity, consistent with the working hypothesis that the fraction of strongly bound crossbridges is a causative factor in the susceptibility of skeletal muscle to stretch-induced damage. NEW & NOTEWORTHY Force deficits caused by stretch of contracting muscle are most severe when the stretch is applied during an isometric contraction, but prevented if the muscle is shortening at high velocity when the stretch occurs. This study indicates that velocity-controlled modulation of the number of strongly bound crossbridges is the basis for the observed relationship between stretch-induced muscle damage and prevailing shortening velocity. Copyright © 2017 the American Physiological Society.

Active shortening protects against stretch-induced force deficits in human skeletal muscle

PubMed Central

Saripalli, Anjali L.; Sugg, Kristoffer B.; Brooks, Susan V.

2017-01-01

Skeletal muscle contraction results from molecular interactions of myosin “crossbridges” with adjacent actin filament binding sites. The binding of myosin to actin can be “weak” or “strong,” and only strong binding states contribute to force production. During active shortening, the number of strongly bound crossbridges declines with increasing shortening velocity. Forcibly stretching a muscle that is actively shortening at high velocity results in no apparent negative consequences, whereas stretch of an isometrically (fixed-length) contracting muscle causes ultrastructural damage and a decline in force-generating capability. Our working hypothesis is that stretch-induced damage is uniquely attributable to the population of crossbridges that are strongly bound. We tested the hypothesis that stretch-induced force deficits decline as the prevailing shortening velocity is increased. Experiments were performed on permeabilized segments of individual skeletal muscle fibers obtained from human subjects. Fibers were maximally activated and allowed either to generate maximum isometric force (Fo), or to shorten at velocities that resulted in force maintenance of ≈50% Fo or ≈2% Fo. For each test condition, a rapid stretch equivalent to 0.1 × optimal fiber length was applied. Relative to prestretch Fo, force deficits resulting from stretches applied during force maintenance of 100, ≈50, and ≈2% Fo were 23.2 ± 8.6, 7.8 ± 4.2, and 0.3 ± 3.3%, respectively (means ± SD, n = 20). We conclude that stretch-induced damage declines with increasing shortening velocity, consistent with the working hypothesis that the fraction of strongly bound crossbridges is a causative factor in the susceptibility of skeletal muscle to stretch-induced damage. NEW & NOTEWORTHY Force deficits caused by stretch of contracting muscle are most severe when the stretch is applied during an isometric contraction, but prevented if the muscle is shortening at high velocity when the stretch occurs. This study indicates that velocity-controlled modulation of the number of strongly bound crossbridges is the basis for the observed relationship between stretch-induced muscle damage and prevailing shortening velocity. PMID:28235860

Propulsive Forces of a Biomimetic Undulating Fin

NASA Astrophysics Data System (ADS)

Kalumuck, Kenneth; Brandt, Alan; Armand, Mehran

2007-11-01

Understanding gained from much recent work on force production mechanisms of aquatic organisms holds great promise for improved undersea vehicle propulsion and maneuvering. One class of fish locomotion is that of the median fin utilized by animals such as squid, cuttlefish, knifefish, and seahorse. It is characterized by undulatory motion that creates traveling waves along the fin. Results of experiments conducted on a submerged mechanical underwater undulating fin test bed are presented. The 0.5 m long fin is mounted to a cylindrical body and consists of a flexible skin attached to ribs driven by an adjustable cam mechanism and variable speed motor that enables changing the characteristics of the undulating wave(s). Forces produced were measured in a captive mode under quiescent conditions as well in the presence of an ambient current. Propulsive forces are characterized as a function of the fin width, oscillation frequency, amplitude, and wavelength. Free swimming experiments were also conducted to determine the point of self propulsion. Flow field structure visualization using dye tracers is presented for selected cases. Estimates of performance and applications for use with larger scale vehicles are discussed.

ReaxFF Study of the Oxidation of Softwood Lignin in View of Carbon Fiber Production

DOE PAGES

Beste, Ariana

2014-10-06

We investigate the oxidative, thermal conversion of softwood lignin by performing molecular dynamics simulations based on a reactive force field (ReaxFF). The lignin samples are constructed from coniferyl alcohol units, which are connected through linkages that are randomly selected from a natural distribution of linkages in softwood. The goal of this work is to simulate the oxidative stabilization step during carbon fiber production from lignin precursor. We find that at simulation conditions where stabilization reactions occur, the lignin fragments have already undergone extensive degradation. The 5-5 linkage shows the highest reactivity towards cyclization and dehydrogenation.

Global and Regional Sea Level Rise Scenarios for the United States

NASA Technical Reports Server (NTRS)

Sweet, William V.; Kopp, Robert E.; Weaver, Christopher P.; Obeysekera, Jayantha; Horton, Radley M.; Thieler, E. Robert; Zervas, Chris

2017-01-01

The Sea Level Rise and Coastal Flood Hazard Scenarios and Tools Interagency Task Force, jointly convened by the U.S. Global Change Research Program (USGCRP) and the National Ocean Council (NOC), began its work in August 2015. The Task Force has focused its efforts on three primary tasks: 1) updating scenarios of global mean sea level (GMSL) rise, 2) integrating the global scenarios with regional factors contributing to sea level change for the entire U.S. coastline, and 3) incorporating these regionally appropriate scenarios within coastal risk management tools and capabilities deployed by individual agencies in support of the needs of specific stakeholder groups and user communities. This technical report focuses on the first two of these tasks and reports on the production of gridded relative sea level (RSL, which includes both ocean-level change and vertical land motion) projections for the United States associated with an updated set of GMSL scenarios. In addition to supporting the longer-term Task Force effort, this new product will be an important input into the USGCRP Sustained Assessment process and upcoming Fourth National Climate Assessment (NCA4) due in 2018. This report also serves as a key technical input into the in-progress USGCRP Climate Science Special Report (CSSR).

ISOON + SOLIS: Merging the Data Products

NASA Astrophysics Data System (ADS)

Radick, R.; Dalrymple, N.; Mozer, J.; Wiborg, P.; Harvey, J.; Henney, C.; Neidig, D.

2005-05-01

The combination of AFRL's ISOON and NSO's SOLIS offers significantly greater capability than the individual instruments. We are working toward merging the SOLIS and ISOON data products in a single central facility. The ISOON system currently includes both an observation facility and a remote analysis center (AC). The AC is capable of receiving data from both the ISOON observation facility as well as external sources. It archives the data and displays corrected images and time-lapse animations. The AC has a large number of digital tools that can be applied to solar images to provide quantitative information quickly and easily. Because of its convenient tools and ready archival capability, the ISOON AC is a natural place to merge products from SOLIS and ISOON. We have completed a preliminary integration of the ISOON and SOLIS data products. Eventually, we intend to distribute viewing stations to various users and academic institutions, install the AC software tools at a number of user locations, and publish ISOON/SOLIS data products jointly on a common web page. In addition, SOLIS data products, separately, are and will continue to be fully available on the NSO,s Digital Library and SOLIS web pages, and via the Virtual Solar Observatory. This work is being supported by the National Science Foundation and the Air Force Office of Scientific Research.

Individual differences in phonetic cue use in production and perception of a non-native sound contrast

PubMed Central

Schertz, Jessamyn; Cho, Taehong; Lotto, Andrew; Warner, Natasha

2015-01-01

The current work examines native Korean speakers’ perception and production of stop contrasts in their native language (L1, Korean) and second language (L2, English), focusing on three acoustic dimensions that are all used, albeit to different extents, in both languages: voice onset time (VOT), f0 at vowel onset, and closure duration. Participants used all three cues to distinguish the L1 Korean three-way stop distinction in both production and perception. Speakers’ productions of the L2 English contrasts were reliably distinguished using both VOT and f0 (even though f0 is only a very weak cue to the English contrast), and, to a lesser extent, closure duration. In contrast to the relative homogeneity of the L2 productions, group patterns on a forced-choice perception task were less clear-cut, due to considerable individual differences in perceptual categorization strategies, with listeners using either primarily VOT duration, primarily f0, or both dimensions equally to distinguish the L2 English contrast. Differences in perception, which were stable across experimental sessions, were not predicted by individual variation in production patterns. This work suggests that reliance on multiple cues in representation of a phonetic contrast can form the basis for distinct individual cue-weighting strategies in phonetic categorization. PMID:26644630

Memories of early work on muscle contraction and regulation in the 1950's and 1960's

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huxley, Hugh E.

2008-04-25

Professor Ebashi's epic work on the biochemistry of the regulation of muscle contraction began in the early 1950's, during the same period that work on the molecular basis of force production in muscle was also beginning. The latter work started in two MRC Research Units in the UK, and was continued jointly by the two workers from those Units who had, independently, gone to MIT to learn the new techniques of electron microscopy and to apply them to muscle. In a somewhat similar fashion, Professor Ebashi also spent one or two years in the USA, continuing his work on themore » role of calcium in muscle regulation in Lippman's laboratory, before returning to Japan to achieve the great breakthroughs in this work during the 1960's. Hanson and Huxley, after putting forward the overlapping actin and myosin filament arrays model for the striated muscle sarcomere, and subsequently the sliding filament model of muscle contraction (simultaneously with A.F Huxley and R. Niedergerke), returned to the UK to pursue detailed structural studies in separate Research Units, in a mixture of consultation, collaboration, and competition, during the later 1950's and throughout the 1960's. However, the path to enlightenment described here in some detail was somewhat more tortuous than the standard literature perhaps reveals. Nevertheless, by the time of the Cold Spring Harbor Symposium on Muscle Contraction in 1972, the two lines of enquiry on regulation itself, and on the tilting cross-bridge model of force production, had arrived at a good deal of common ground, and indeed the identification of troponin and its periodic distribution along the actin filaments had helped resolve a long-standing puzzle in the interpretation of the low angle X-ray diagram. Since then, an enormous amount of remarkable new work has been necessary to establish troponin regulation and the tilting cross-bridge mechanism in molecular detail, but the work in the 1950's and 1960's has provided a firm and accurate basis for our current understanding.« less

A Global View on the Effects of Work on Health in Later Life.

PubMed

Staudinger, Ursula M; Finkelstein, Ruth; Calvo, Esteban; Sivaramakrishnan, Kavita

2016-04-01

Work is an important environment shaping the aging processes during the adult years. Therefore, the cumulative and acute effects of work characteristics on late-life health deserve great attention. Given that population aging has become a global trend with ensuing changes in labor markets around the world, increased attention is paid to investigating the effects of the timing of retirement around the world and the macroeconomic benefits often associated with delaying retirement. It will be essential for societies with aging populations to maintain productivity given an aging workforce and for individuals it will be crucial to add healthy and meaningful years rather than just years to their lives. We first describe the available evidence about participation of older workers (65+) in the labor force in high, middle, and low-income countries. Second, we discuss the individual-level and societal influences that might govern labor-force participation of older adults. Thirdly, we review evidence on the association between work on the one and physical, mental, and cognitive health in later life on the other. Globally, both is true: work supports healthy aging and jeopordizes it. We draw implications for policymaking in terms of social protection, HR policies, and older employee employability. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Fluid dynamics of flapping aquatic flight in the bird wrasse: three-dimensional unsteady computations with fin deformation.

PubMed

Ramamurti, Ravi; Sandberg, William C; Löhner, Rainald; Walker, Jeffrey A; Westneat, Mark W

2002-10-01

Many fishes that swim with the paired pectoral fins use fin-stroke parameters that produce thrust force from lift in a mechanism of underwater flight. These locomotor mechanisms are of interest to behavioral biologists, biomechanics researchers and engineers. In the present study, we performed the first three-dimensional unsteady computations of fish swimming with oscillating and deforming fins. The objective of these computations was to investigate the fluid dynamics of force production associated with the flapping aquatic flight of the bird wrasse Gomphosus varius. For this computational work, we used the geometry of the wrasse and its pectoral fin, and previously measured fin kinematics, as the starting points for computational investigation of three-dimensional (3-D) unsteady fluid dynamics. We performed a 3-D steady computation and a complete set of 3-D quasisteady computations for a range of pectoral fin positions and surface velocities. An unstructured, grid-based, unsteady Navier-Stokes solver with automatic adaptive remeshing was then used to compute the unsteady flow about the wrasse through several complete cycles of pectoral fin oscillation. The shape deformation of the pectoral fin throughout the oscillation was taken from the experimental kinematics. The pressure distribution on the body of the bird wrasse and its pectoral fins was computed and integrated to give body and fin forces which were decomposed into lift and thrust. The velocity field variation on the surface of the wrasse body, on the pectoral fins and in the near-wake was computed throughout the swimming cycle. We compared our computational results for the steady, quasi-steady and unsteady cases with the experimental data on axial and vertical acceleration obtained from the pectoral fin kinematics experiments. These comparisons show that steady state computations are incapable of describing the fluid dynamics of flapping fins. Quasi-steady state computations, with correct incorporation of the experimental kinematics, are useful when determining trends in force production, but do not provide accurate estimates of the magnitudes of the forces produced. By contrast, unsteady computations about the deforming pectoral fins using experimentally measured fin kinematics were found to give excellent agreement, both in the time history of force production throughout the flapping strokes and in the magnitudes of the generated forces.

Evolution of Logistics: Supporting NATO’s Multinational Corps

DTIC Science & Technology

1991-02-15

French Munitions Council was formed to coordinate the pooling of common use items (ammunition, 2 petroleum products, and food .) Problems remained...recipient countries provided the U.S. forces food , housing, transportation, training facilities, etc. This was particularly true for the 24 U.S. forces in...Commonwealth forces ’with perishable foods and petroleum products, and the ROK forces with war materiel. 3 4 The forces of each nation arrived in Korea

Towards a Learning Workforce: A Policy Discussion Paper on Adult Learners at Work.

ERIC Educational Resources Information Center

Tuckett, Alan

There is widespread agreement in Great Britain that the work force must receive more skills training if the country is to be competitive in the future. Of special concern is the 70 percent of the work force who left school at the earliest possible opportunity, and the (overlapping) 70 percent of the work force who have not received training for a…

[Salary and clinical productivity among physicians in Norwegian somatic hospitals 2001-2008].

PubMed

Johannessen, Karl-Arne

2010-09-23

Analysis of the future need for medical doctors necessitates an assessment of their productivity. The goals of this study were to analyze the relation between doctors' work force and the increased activity in hospitals, and to describe the development of working hours and salary for hospital doctors in a gender perspective. Information about man-labour years, working time and salary for doctors in Norwegian somatic hospitals was retrieved for the period 2001-2008. Number of hospital stays, DRG points and outpatient consultations per man-labour year are used as measures of doctors' clinical productivity. The percentage of female doctors increased from 34.7 % to 42.2 %. The mean annual salary increased more for men (14.4 % higher in 2001 and 16.6 % higher in 2008) than women. Total salary costs for doctors increased by 69.9 % (from 3.66 bill to 6.22 bill. NOK); 42.6 % of this increase was generated by new positions (1 306 man-labour years, + 21.2 %). Labour years from extended working hours increased by 6.8 % (constituting 1043 labour years in 2008; 12.2 % of the total), but the average extended labour time per doctor decreased (-16.7 % for women and -9.6 % for men). The number of hospital stays increased by 13.2 %, DRG points increased by 12.4 % and outpatient consultations increased by 9.3 % per doctor's work year in the period 2001-2008. Higher salaries for men may be explained by age, more men in senior positions and longer working hours than for women. The productivity of Norwegian doctors still increased from 2001 to 2008 (taking into account the increase in salary).

Forces on nuclei moving on autoionizing molecular potential energy surfaces.

PubMed

Moiseyev, Nimrod

2017-01-14

Autoionization of molecular systems occurs in diatomic molecules and in small biochemical systems. Quantum chemistry packages enable calculation of complex potential energy surfaces (CPESs). The imaginary part of the CPES is associated with the autoionization decay rate, which is a function of the molecular structure. Molecular dynamics simulations, within the framework of the Born-Oppenheimer approximation, require the definition of a force field. The ability to calculate the forces on the nuclei in bio-systems when autoionization takes place seems to rely on an understanding of radiative damages in RNA and DNA arising from the release of slow moving electrons which have long de Broglie wavelengths. This work addresses calculation of the real forces on the nuclei moving on the CPES. By using the transformation of the time-dependent Schrödinger equation, previously used by Madelung, we proved that the classical forces on nuclei moving on the CPES correlated with the gradient of the real part of the CPES. It was proved that the force on the nuclei of the metastable molecules is time independent although the probability to detect metastable molecules exponentially decays. The classical force is obtained from the transformed Schrödinger equation when ℏ=0 and the Schrödinger equation is reduced to the classical (Newtonian) equations of motion. The forces on the nuclei regardless on what potential energy surface they move (parent CPES or product real PESs) vary in time due to the autoionization process.

Why Japanese workers remain in the labor force so long: lessons for the United States?

PubMed

Williamson, John B; Higo, Masa

2009-12-01

As part of the search for ways to increase labor force participation rates among older workers in the United States, it makes sense to take a close look at evidence from Japan, one of the few industrial countries with a substantially higher labor force participation rate among older workers, particularly men, than the United States. Based mainly on prior studies and original interview data, we first discuss five potential factors which help explain why Japanese workers remain in the labor force as long as they do: (1) perceived economic necessity; (2) the large fraction of workers who are self-employed; (3) a culture that puts a high value on remaining in the labor force throughout the life course; (4) the long healthy life expectancy; and (5) the government's role in facilitating the labor force participation of older workers. We suggest that the Japanese national cultural value on remaining economically productive well into old age clearly underlies the development of the government's legislative initiatives aiming to extend the working lives of older workers. We then outline three policy suggestions for those seeking to increase labor force participation rates among older U.S. workers: (1) increase the financial incentive to workers who remain in the labor force; (2) improve public programs designed to foster efforts by older workers to become self-employed; and (3) increase the extent of government efforts to link older workers to prospective employers.

Gender, technology change and globalization: the case of China.

PubMed

Guo, H; Zhao, M

1999-01-01

This paper reviews the experience of women workers in China while the country's economy is changing into a globalized, technologically advanced one. New computer-based technology is increasingly acknowledged as a powerful and pervasive force that can shape or, at least in many ways, affect employment. It is hailed for opening up fresh employment opportunities and reducing the physical stress involved in work. However, the possibilities of redundancies or intensification of workload also exist. By focusing on changes in women's work, the article reveals the contradictions inherent in following a development path based on ever-higher levels of technology in the context of an intensive mode of production, to which productivity is the core value. The economy is bolstered and some workers gain employment in expanding industries. However, workers, who lack access to training and who are reliant on the dwindling state support for their reproductive responsibilities, are marginalized and seek employment in the growing informal economy.

Force and Directional Force Modulation Effects on Accuracy and Variability in Low-Level Pinch Force Tracking.

PubMed

Park, Sangsoo; Spirduso, Waneen; Eakin, Tim; Abraham, Lawrence

2018-01-01

The authors investigated how varying the required low-level forces and the direction of force change affect accuracy and variability of force production in a cyclic isometric pinch force tracking task. Eighteen healthy right-handed adult volunteers performed the tracking task over 3 different force ranges. Root mean square error and coefficient of variation were higher at lower force levels and during minimum reversals compared with maximum reversals. Overall, the thumb showed greater root mean square error and coefficient of variation scores than did the index finger during maximum reversals, but not during minimum reversals. The observed impaired performance during minimum reversals might originate from history-dependent mechanisms of force production and highly coupled 2-digit performance.

Perceived Submaximal Force Production in Young Adults

ERIC Educational Resources Information Center

Jackson, Allen W.; Ludtke, Andrew W.; Martin, Scott B.; Koziris, L. (Perry); Dishman, Rod K.

2006-01-01

The purpose of this investigation was to examine the force production patterns using perceived stimulus cues from 10% to 90% of maximal force. In Experiment 1, 54 men (age: 19-34 years) and 53 women (age: 18-37 years) performed leg extensions on a dynamometer at a speed of 60 degrees/s. Participants produced actual forces perceived to be 10-90% of…

[Hope for patients with rare diseases--"orphan" drugs].

PubMed

Kuzelová, M; Kubácková, K; Palágyi, M; Smíd, M

2006-01-01

Rare diseases are defined as those affected less than five in every 10 000 person in European Union. The purpose of this paper is to present activities, which make possible to stimulate research development and marketing of appropriate medicine for tretment of rare disease, named "Orphan" medicinal products. EU "Orphan" medicinal products legislation which entered into force in April 2000 is described. Definition of "Orphan" medicinal products as well as the procedure of designation and placing the products into the Community register is presented. Those incentives to industry are described, which are already five years very well implemented oh the European level mostly on the pre-authorisation phase of "Orphan" medicinal products development, but also in the registration process as well as the post-authorisation phase. Finaly, the first twenty "Orphan" medicinal products, which have been given positive opinion in the Community for the grant of a marketing authorisation till April 2005 are mentioned in this work. The real availability of "Orphan" medicinal products in the particular EU member states is analysed.

[Fact Sheets on Working Women].

ERIC Educational Resources Information Center

National Commission on Working Women, Washington, DC.

These four fact sheets address a number of issues relating to women in the work force. The first, "An Overview of Women in the Work Force," offers a look at the numbers of women in the labor force, the occupational categories represented by women workers, women in professional and nonprofessional occupations, and women in nontraditional…

America's Changing Work Force. Statistics in Brief.

ERIC Educational Resources Information Center

American Association of Retired Persons, Washington, DC.

This booklet provides information about the changing work force. It offers a profile of workers aged 45 and older, as well as likely changes in the work force of the future. Tables and graphs illustrate the following: profile of Americans aged 50 and older, by employment status; employment status of the civilian noninstitutional population by age…

Is American business working for the poor?

PubMed

Bane, M J; Ellwood, D T

1991-01-01

At first glance, poverty seems to have little to do with business. When most people--managers included--think about poverty, they assume that people are poor because they are isolated from the mainstream economy, not productive participants in it. But according to Harvard University professors Mary Jo Bane and David Ellwood, this is a misleading image of the true face of poverty in the United States today. Most poor adults--and a full 90% of poor children--live in families where work is the norm, not the exception. Poor people often work or want to work. But at the low-wage end of the American economy, having a job is no guarantee of avoiding poverty. Poverty is a business issue, then, because the American poor are part of the American work force. And this poses a problem for managers. In a more competitive and fast-changing economic environment, the performance of companies increasingly depends on the capabilities of their employees. In response to this human-resource challenge, more and more managers are embracing the language of "empowerment". And yet how can low-wage employees believe empowerment when their experience of work is, quite literally, impoverishment? It is unlikely that American companies can create the work force of the future with the poverty policies of the past. Fortunately, there are some simple policy mechanisms that can assist the working poor without putting an undue burden on business. Enacting them, however, requires managers to see poverty policy as one part of a national human-resource strategy that links the strategic concerns of companies to a broad social agenda.

The impact of working technique on physical loads - an exposure profile among newspaper editors.

PubMed

Lindegård, A; Wahlström, J; Hagberg, M; Hansson, G-A; Jonsson, P; Wigaeus Tornqvist, E

2003-05-15

The aim of this study was to investigate the possible associations between working technique, sex, symptoms and level of physical load in VDU-work. A study group of 32 employees in the editing department of a daily newspaper answered a questionnaire, about physical working conditions and symptoms from the neck and the upper extremities. Muscular load, wrist positions and computer mouse forces were measured. Working technique was assessed from an observation protocol for computer work. In addition ratings of perceived exertion and overall comfort were collected. The results showed that subjects classified as having a good working technique worked with less muscular load in the forearm (extensor carpi ulnaris p=0.03) and in the trapezius muscle on the mouse operating side (p=0.02) compared to subjects classified as having a poor working technique. Moreover there were no differences in gap frequency (number of episodes when muscle activity is below 2.5% of a reference contraction) or muscular rest (total duration of gaps) between the two working technique groups. Women in this study used more force (mean force p=0.006, peak force p=0.02) expressed as % MVC than the men when operating the computer mouse. No major differences were shown in muscular load, wrist postures, perceived exertion or perceived comfort between men and women or between cases and symptom free subjects. In conclusion a good working technique was associated with reduced muscular load in the forearm muscles and in the trapezius muscle on the mouse operating side. Moreover women used more force (mean force and peak force) than men when operating the click button (left button) of the computer mouse.

Population issues in economic planning: uses of demography in business.

PubMed

Graham, R J

1984-01-01

Economists use demography in planning and forecasting business needs. As a bank, Westpac uses the information for its own internal business purposes and to assess general economic trends. Externally, the bank is expected by government and the public to have some authoritative views on the state of the economy. To form these views, it is necessary to understand a very wide array of statistical indicators, including demographic statistics. The main population issues of concern are: size, location, and changes in the population of Australia as a whole and by State; labor force (including projections); age profile of Australia and by State. The major source for this information is the Australian Bureau of Statistics. More detailed patterns often emerge, particularly for individual States, from papers prepared by others. This information is used by Westpac in 3 main planning areas and 2 broad assessment areas: planning -- location of bank branches, products/services offered, and marketing of products/services; and assessment -- economic outlook (labor force, housing needs, demand for funds) and specific industries. Recently, Westpac restructured its organization to cater to the changing needs of customers and the changing geographic patterns of population spread. The bank now has 4 major groups: retail financial services for personal and commercial markets; corporate and international; management services; and group planning (includes economic department). To offer products that fit the market, the bank needs to know the characteristics of the population by age, spending patterns, lifestyle preferences, and investment needs. Within Australia, a relatively new service offered by most financial institutions, which is directly related to population issues, is a counseling service for retirees. Westpac has a product called Club 55, which is a package of services designed for persons who have retired or are planning to retire. Another clearly perceived community need is for superannuation schemes. The marketing of financial services clearly is in evidence. With deregulation of the financial system, the pace of competition for the household dollar and corporate banking business has intensified in the last year or so, and the barrage of advertising is 1 result. Such advertising is carefully aimed at potential customers grouped by age, location, lifestyle, and spending patterns. Marketing is also conducted indirectly through industry groups and at various trade seminars. Turning to the broader aspects of economic planning, the same kinds of population indicators are applied to macroeconomic issues. In particular, assessments of labor force trends, housing needs, and demand for funds from the public and private sectors will affect financial policy of business and monetary and fiscal policy of governments. The most commonly used indicators are: population size/characteristics; location; population growth; labor force; labor force mobility, including geographic mobility; migration -- both shortterm and longterm. The aging of the population holds many implications for future government economic policy. This trend holds obvious implications for government spending and the taxation burden on the work force. Australia will face significantly higher welfare expenditures for which funding will need to be obtained from a relatively stable working age population -- about 65% of total population for the next 20 years.

Defining Conditions for the Use of Persistent Surveillance

DTIC Science & Technology

2009-12-01

as hard as the Air Force has worked the North Dakota and Ohio delegations,’ says Colonel Charles Bartlett, head of a special Air Force task force on...UAVs…While Richard Shelby , the Republican senator from Alabama, is concerned about the impact on Redstone Arsenal, which manages much of the Army’s...UAV work, Byron Dorgan, the North Dakota Democratic senator, wants to attract more work for Grand Forks Air Force base, partly to make up for the

Development and Evaluation of the Method with an Affective Interface for Promoting Employees' Morale

NASA Astrophysics Data System (ADS)

Fujino, Hidenori; Ishii, Hirotake; Shimoda, Hiroshi; Yoshikawa, Hidekazu

For the sustainable society, organization management not based on the mass production and mass consumption but having the flexibility to meet to various social needs precisely is required. For realizing such management, the emploees' work morale is required. Recently, however, the emploees' work morale is tend to decrease. Therefore, in this study, the authors developed the model of the method for promoting and keeping employees' work morale effectively and efficiently. Especially the authors thought “work morale” of “attitude to the work”. Based on this idea, it could be considered that the theory of the persuasion psychology and various persuasion techniques. Therefore, the model of the method applying the character agent was developed based on the forced compliance which is one of persuasion techniques based on the theory of the cognitive dissonance. By the evaluation experiment using human subjects, it was confirmed that developed method could improve workers' work morle effectively.

Collaboration between nurses and agricultural teachers to prevent adolescent agricultural injuries: the Agricultural Disability Awareness and Risk Education Model.

PubMed

Reed, Deborah B; Kidd, Pamela S

2004-01-01

Nearly 2 million children live or work on America's farms and ranches. Despite the increasing mechanization of production agriculture in the United States, children still constitute a considerable portion of the work force on farms and ranches. When adjusted for actual work exposure time, adolescent injury rates on agricultural establishments surpass those of adults (Castillo, D. N., Landen, D. D., & Layne, L. A. (1994). American Journal of Public Health, 84, 646-649). This project, headed by two public health nurses, developed and tested an agricultural safety curriculum [Agricultural Disability Awareness and Risk Education (AgDARE)] for use in high school agriculture classes. Students who participated in AgDARE scored significantly higher in farm safety attitude and intent to change work behavior than the control group. School and public health nurses, working together with agriculture teachers, may make an effective team in reducing injuries among teen agricultural workers.

Specific cerebellar regions are related to force amplitude and rate of force development

PubMed Central

Spraker, M.B.; Corcos, D.M.; Kurani, A.S.; Prodoehl, J.; Swinnen, S.P.; Vaillancourt, D.E.

2011-01-01

The human cerebellum has been implicated in the control of a wide variety of motor control parameters, such as force amplitude, movement extent, and movement velocity. These parameters often covary in both movement and isometric force production tasks, so it is difficult to resolve whether specific regions of the cerebellum relate to specific parameters. In order to address this issue, the current study used two experiments and SUIT normalization to determine whether BOLD activation in the cerebellum scales with the amplitude or rate of change of isometric force production or both. In the first experiment, subjects produced isometric pinch-grip force over a range of force amplitudes without any constraints on the rate of force development. In the second experiment, subjects varied the rate of force production, but the target force amplitude remained constant. The data demonstrate that BOLD activation in separate sub-areas of cerebellar regions lobule VI and Crus I/II scale with both force amplitude and force rate. In addition, BOLD activation in cerebellar lobule V and vermis VI was specific to force amplitude, whereas BOLD activation in lobule VIIb was specific to force rate. Overall, cerebellar activity related to force amplitude was located superior and medial, whereas activity related to force rate was inferior and lateral. These findings suggest that specific circuitry in the cerebellum may be dedicated to specific motor control parameters such as force amplitude and force rate. PMID:21963915

Acquire an Bruker Dimension FastScan (trademark) Atomic Force Microscope (AFM) for Materials, Physical and Biological Science Research and Education

DTIC Science & Technology

2016-04-14

two super users, Drs. Biswajit Sannigrahi and Guangchang Zhou were trained by the Senior Engineer for Product Service, Dr. Teddy Huang from the... Engineering : The number of undergraduates funded by your agreement who graduated during this period and intend to work for the Department of Defense The...science, mathematics, engineering or technology fields: Student Metrics This section only applies to graduating undergraduates supported by this

Three-stage stochastic pump: Another type of Onsager-Casimir symmetry and results far from equilibrium

NASA Astrophysics Data System (ADS)

Rosas, Alexandre; Van den Broeck, Christian; Lindenberg, Katja

2018-06-01

The stochastic thermodynamic analysis of a time-periodic single particle pump sequentially exposed to three thermochemical reservoirs is presented. The analysis provides explicit results for flux, thermodynamic force, entropy production, work, and heat. These results apply near equilibrium as well as far from equilibrium. In the linear response regime, a different type of Onsager-Casimir symmetry is uncovered. The Onsager matrix becomes symmetric in the limit of zero dissipation.

Technical Education, Work Force Training, and U.S. Competitiveness. Hearing before the Subcommittee on Technology and Competitiveness of the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Second Congress, First Session (September 17, 1991).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This document records the oral and written testimony given at a U.S. House of Representatives subcommittee hearing on technical training and productivity. Witnesses who provided testimony included an official of the National Science Foundation, several administrators of manufacturing companies, a representative of community colleges, and…

An Experimental Investigation of Productivity Stratification and Knowledge Transfer in an Electronically Mediated Environment

DTIC Science & Technology

2004-03-23

material at hand: it forces student engagement . As extracted from the works of Bloom (1976) and Hecht (1978) by Kumar (1991:50) in his meta...analysis of instruction-engagement, “if an instructional method [has] an influence on student achievement,” then “ student engagement in a learning task...must mediate the relationship.” An appropriate way to define student engagement is the time a student “actively participates in learning” (Kumar

An Update to the Budget and Economic Outlook: 2015 to 2025

DTIC Science & Technology

2015-08-01

Economic Analysis; Bureau of Labor Statistics ; Federal Reserve. Notes: Real gross domestic product is the output of the economy adjusted to remove the...the next few years, in CBO’s view, will be continued improvements in households’ creditworthiness and in the availability of credit. Delinquency rates...Budget Office; Bureau of Labor Statistics . Notes: The rate of short-term unemployment is the percentage of the labor force that has been out of work for

Validation of the Air Force Weather Agency Ensemble Prediction Systems

DTIC Science & Technology

2014-03-27

by Mr. Evan L. Kuchera. Also, I would like to express my gratitude to Mr. Jeff H. Zaunter for painstakingly working with me to provided station...my fellow AFIT classmates, Capt Jeremy J. Hromsco, Capt Haley A. Homan, Capt Kyle R. Thurmond and 2Lt Coy C. Fischer for their support and...Codes. The raw METARs and SPECIs were decoded and provided for this research by Mr. Jeff Zautner, 14/WS Meteorologist, Tailored Product Analyst

F-35 Joint Strike Fighter: Current Outlook Is Improved, but Long-Term Affordability Is a Major Concern

DTIC Science & Technology

2013-03-01

and improvement efforts with DOD, F-35 program, and contractor officials. We toured the aircraft manufacturing plant , obtained production and supply...members of the contractor’s work force and DOD plant representatives. We evaluated DOD’s restructuring actions and impacts on the program, tracked...Testing of the final increment is expected to begin in 2014 and continue through 2016. Initial operational test and evaluation ( IOT &E) is

KSC-2013-3565

NASA Image and Video Library

2013-06-24

CAPE CANAVERAL, Fla. –Outredgeous red romaine lettuce plants grow inside the bellows of a prototype VEGGIE flight pillow. U.S. astronauts living and working aboard the International Space Station are going to receive a newly developed Vegetable Production System VEGGIE. VEGGIE is set to launch aboard SpaceX's Dragon capsule on NASA's third Commercial Resupply Services mission targeted to launch Dec. 9 from Space Launch Complex 40 at Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Gioia Massa

KSC-2013-3562

NASA Image and Video Library

2011-06-29

CAPE CANAVERAL, Fla. – This prototype VEGGIE hardware was designed and built by Orbital Technologies Corp. of Madison, Wisc. U.S. astronauts living and working aboard the International Space Station are going to receive a newly developed Vegetable Production System VEGGIE. VEGGIE is set to launch aboard SpaceX's Dragon capsule on NASA's third Commercial Resupply Services mission targeted to launch Dec. 9 from Space Launch Complex 40 at Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Gioia Massa

KSC-2013-3563

NASA Image and Video Library

2012-09-25

CAPE CANAVERAL, Fla. – A 28-day-old Outredgeous red romaine lettuce plant grows in a prototype VEGGIE flight pillow. U.S. astronauts living and working aboard the International Space Station are going to receive a newly developed Vegetable Production System VEGGIE. VEGGIE is set to launch aboard SpaceX's Dragon capsule on NASA's third Commercial Resupply Services mission targeted to launch Dec. 9 from Space Launch Complex 40 at Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Gioia Massa

KSC-2013-3567

NASA Image and Video Library

2013-06-06

CAPE CANAVERAL, Fla. – Outredgeous red romaine lettuce plants grow inside the bellows of a prototype VEGGIE flight pillow. U.S. astronauts living and working aboard the International Space Station are going to receive a newly developed Vegetable Production System VEGGIE. VEGGIE is set to launch aboard SpaceX's Dragon capsule on NASA's third Commercial Resupply Services mission targeted to launch Dec. 9 from Space Launch Complex 40 at Cape Canaveral Air Force Station in Florida. Photo credit: NASA/Bryan Onate

Gendered histories: garment production and migration in Mexico.

PubMed

Wilson, F

1999-02-01

Data gathered in Aguascalientes during the 1990s are used to analyze how the garment industry in Mexico has responded to economic recession and trade liberalization. In particular, the relationship between industrial change and gendered patterns of migration are explored. The author concludes that "migration over recent years has increasingly allowed working women the possibility of entering a transnational labour force and given them important labouring and living experiences on both sides of the border." excerpt

A Comparative Evaluation of the Effects of the Implementation of the Production Oriented Maintenance Organization (POMO) on Aircraft Maintenance

DTIC Science & Technology

1978-09-01

Division AREA & WORK UNIT NUMBERS School of Systems and Logistics’ Air Force Institute of Technology,WPAFB,OH II. CONTROLLING OFFICE NAME AND ADDRESS 12 ...STRUCTURE) ............. ................ 9) 12 . SUMMARY OF ALL ANALYSIS RESUILT,"S ........ ........ 94 vii i LIST OF FIGURES Figure Page 1. Deputy...ness Rate (Variable 4) .... ............ ... 81 12 . Graph of Data Values for Abort Rate (Variable 5 e) . ..................... 82 13. Graph of Data

Workplace diversity: a leadership challenge. Managing diversity is a social, financial, and moral imperative.

PubMed

Lappetito, J

1994-03-01

Fostering workplace diversity is about building an organizational culture that embraces personal differences and encourages heterogeneous persons to work together toward a common end. Setting in motion the transition to a more inclusive and productive workplace is an uncommon challenge and the primary responsibility of leaders, especially in Catholic healthcare. The origins of diversity can be found in creation itself. Not only are we united as a people of God and as members of the body of Christ, we are bound together through our shared humanity. Three values are especially relevant to promoting diversity in the workplace: respect for human dignity, the common good, and distributive justice as participation in the common good. Economic incentives strengthen the theological and moral motives for developing a diverse work force. Organizations' financial success will depend ultimately on how well diversity is integrated into the organizational culture. As a process, managing diversity enables healthcare leaders to discover new ways to develop the potential of all employees and at the same time improve performance and production. At the heart of managing diversity lies the reform of internal systems, structures, and processes. Managing diversity also requires the transformation of the organization's culture. Initiatives that are useful for setting a positive future course include conducting a cultural audit, establishing a cultural diversity task force, and putting in place a diversity "champion" who is accountable directly to the chief executive officer.

InGaN working electrodes with assisted bias generated from GaAs solar cells for efficient water splitting.

PubMed

Liu, Shu-Yen; Sheu, J K; Lin, Yu-Chuan; Chen, Yu-Tong; Tu, S J; Lee, M L; Lai, W C

2013-11-04

Hydrogen generation through water splitting by n-InGaN working electrodes with bias generated from GaAs solar cell was studied. Instead of using an external bias provided by power supply, a GaAs-based solar cell was used as the driving force to increase the rate of hydrogen production. The water-splitting system was tuned using different approaches to set the operating points to the maximum power point of the GaAs solar cell. The approaches included changing the electrolytes, varying the light intensity, and introducing the immersed ITO ohmic contacts on the working electrodes. As a result, the hybrid system comprising both InGaN-based working electrodes and GaAs solar cells operating under concentrated illumination could possibly facilitate efficient water splitting.

Effect of work of adhesion on deep bed filtration process

NASA Astrophysics Data System (ADS)

Przekop, Rafał; Jackiewicz, Anna; WoŻniak, Michał; Gradoń, Leon

2016-06-01

Collection of aerosol particles in the particular steps of the technology of their production, and purification of the air at the workplace and atmospheric environment, requires the efficient method of separation of particulate matter from the carrier gas. There are many papers published in last few years in which the deposition of particles on fibrous collectors is considered, Most of them assume that collisions between particle and collector surface is 100% effective. In this work we study the influence of particles and fiber properties on the deposition efficiency. For the purpose of this work the lattice-Boltzmann model describes fluid dynamics, while the solid particle motion is modeled by the Brownian dynamics. The interactions between particles and surface are modelled using energy balanced oscillatory model. The work of adhesion was estimated using Atomic Force Microscopy.

Effect of work of adhesion on deep bed filtration process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Przekop, Rafał; Jackiewicz, Anna; Gradoń, Leon

2016-06-08

Collection of aerosol particles in the particular steps of the technology of their production, and purification of the air at the workplace and atmospheric environment, requires the efficient method of separation of particulate matter from the carrier gas. There are many papers published in last few years in which the deposition of particles on fibrous collectors is considered, Most of them assume that collisions between particle and collector surface is 100% effective. In this work we study the influence of particles and fiber properties on the deposition efficiency. For the purpose of this work the lattice-Boltzmann model describes fluid dynamics,more » while the solid particle motion is modeled by the Brownian dynamics. The interactions between particles and surface are modelled using energy balanced oscillatory model. The work of adhesion was estimated using Atomic Force Microscopy.« less

Statistics of work performed on a forced quantum oscillator.

PubMed

Talkner, Peter; Burada, P Sekhar; Hänggi, Peter

2008-07-01

Various aspects of the statistics of work performed by an external classical force on a quantum mechanical system are elucidated for a driven harmonic oscillator. In this special case two parameters are introduced that are sufficient to completely characterize the force protocol. Explicit results for the characteristic function of work and the corresponding probability distribution are provided and discussed for three different types of initial states of the oscillator: microcanonical, canonical, and coherent states. Depending on the choice of the initial state the probability distributions of the performed work may greatly differ. This result in particular also holds true for identical force protocols. General fluctuation and work theorems holding for microcanonical and canonical initial states are confirmed.

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M.; Ludtka, Gail M.; Wilgen, John B.; Murphy, Bart L.

2015-05-19

A carriage for high magnetic field environments includes a plurality of work-piece separators disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla for supporting and separating a plurality of work-pieces by a preselected, essentially equal spacing, so that, as a first work-piece is inserted into the magnetic field, a second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

The cost of muscle power production: muscle oxygen consumption per unit work increases at low temperatures in Xenopus laevis.

PubMed

Seebacher, Frank; Tallis, Jason A; James, Rob S

2014-06-01

Metabolic energy (ATP) supply to muscle is essential to support activity and behaviour. It is expected, therefore, that there is strong selection to maximise muscle power output for a given rate of ATP use. However, the viscosity and stiffness of muscle increases with a decrease in temperature, which means that more ATP may be required to achieve a given work output. Here, we tested the hypothesis that ATP use increases at lower temperatures for a given power output in Xenopus laevis. To account for temperature variation at different time scales, we considered the interaction between acclimation for 4 weeks (to 15 or 25°C) and acute exposure to these temperatures. Cold-acclimated frogs had greater sprint speed at 15°C than warm-acclimated animals. However, acclimation temperature did not affect isolated gastrocnemius muscle biomechanics. Isolated muscle produced greater tetanus force, and faster isometric force generation and relaxation, and generated more work loop power at 25°C than at 15°C acute test temperature. Oxygen consumption of isolated muscle at rest did not change with test temperature, but oxygen consumption while muscle was performing work was significantly higher at 15°C than at 25°C, regardless of acclimation conditions. Muscle therefore consumed significantly more oxygen at 15°C for a given work output than at 25°C, and plastic responses did not modify this thermodynamic effect. The metabolic cost of muscle performance and activity therefore increased with a decrease in temperature. To maintain activity across a range of temperature, animals must increase ATP production or face an allocation trade-off at lower temperatures. Our data demonstrate the potential energetic benefits of warming up muscle before activity, which is seen in diverse groups of animals such as bees, which warm flight muscle before take-off, and humans performing warm ups before exercise. © 2014. Published by The Company of Biologists Ltd.

Cerebrospinal fluid from subarachnoid haemorrhage patients causes excessive oxidative metabolism compared to vascular smooth muscle force generation.

PubMed

Pyne, G J; Cadoux-Hudson, T A; Clark, J F

2001-01-01

Cerebrospinal fluid (CSF) from subarachnoid haemorrhage (SAH) patients can stimulate vascular smooth muscle to generate force in vitro. CSF from SAH patients suffering from delayed ischaemic neurological deficits due to cerebral vasospasm can generate near maximal force in vitro and previous experiments have ascribed this generation of force to be a calcium mediated event. The intracellular calcium concentration has been demonstrated to rise during the vasospastic process. Calcium also stimulates oxidative metabolism as does adenosine diphosphate (ADP), the product of adenosine triphosphate (ATP) hydrolysis. Significant alteration in high energy metabolites such as ATP, ADP and phosphocreatine have also been demonstrated in various models of SAH mediated vasospasm. Vascular smooth muscle predominantly uses oxidative metabolism for force generation and reserves glycolytic metabolism for ion homeostasis. A decrease in oxidative metabolism during force generation would imply failing mitochondria and increased glycolytic high-energy phosphate supply. Increased oxidative metabolism would imply a decreased efficiency of the contractile apparatus or mitochondria. The aim of this study was to see if SAH CSF stimulation of porcine carotid artery oxidative metabolism was altered during force generation when compared with incremental calcium stimulation with potassium chloride depolarisation. CSF from patients (n = 10) who had subarachnoid haemorrhage stimulated force generation but with a significant 'right shift' in oxygen consumption. This 'right shift' is indicative of an increased energy cost for contractile work. These results suggest that vascular smooth muscle contractile apparatus, when stimulated by subarachnoid cerebrospinal fluid, is consuming excess adenosine triphosphate during force generation.

77 FR 20051 - Notice of Final Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-03

... Products Requiring Federal Contractor Certification as to Forced or Indentured Child Labor Pursuant to... (``Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor''), in accordance with the ``Procedural Guidelines for the Maintenance of the List of Products Requiring Federal Contractor Certification...

Productivity loss at work; health-related and work-related factors.

PubMed

van den Heuvel, Swenne G; Geuskens, Goedele A; Hooftman, Wendela E; Koppes, Lando L J; van den Bossche, Seth N J

2010-09-01

Productivity loss is an increasing problem in an aging working population that is decreasing in numbers. The aim of this study is to identify work-related and health-related characteristics associated with productivity loss, due to either sickness absence or reduced performance at work. In this cross-sectional study, data of the Netherlands Working Conditions Survey of 2007 were used, which includes a national representative sample of 22,759 employees aged 15 to 64 years. Demographic characteristics, health-related and work-related factors were assessed with a questionnaire. Logistic regression analyses were carried out to study the relationship of work-related and health-related factors with low performance at work and sickness absence in the past 12 months. Poor general health, the number of longstanding health conditions, and most types of longstanding health conditions were associated with productivity loss. Health-related factors were in general stronger associated with sickness absence than with low performance at work. Performance: poor health OR 1.54 CI 1.38-1.71, >1 health conditions OR 1.21 CI 1.09-1.35; sickness absence: poor health OR 2.62 CI 2.33-2.93, >1 health conditions OR 2.47 CI 2.21-2.75. Of the different types of longstanding health conditions, only psychological complaints and to a small extent musculoskeletal symptoms, were associated with low performance (respectively OR 1.54 CI 1.27-1.87; OR 1.09 CI 1.00-1.18). Low performance at work was less likely among employees with high physically demanding work (shift work OR 0.70 CI 0.63-0.76, using force OR 0.78 CI 0.72-0.84, and repetitive movements OR 0.74 CI 0.70-0.79). Psychosocial factors were stronger associated with low performance at work than with sickness absence (performance: job autonomy OR 1.28 CI 1.21-1.37, job demands OR 1.23 CI 1.16-1.31, emotionally demanding work OR 1.73 CI 1.62-1.85; sickness absence: job autonomy ns, job demands OR 1.09 CI 1.03-1.17, emotionally demanding work OR 1.09 CI 1.02-1.16). Except for psychological complaints, workers with a longstanding health condition generally perform well while being at work. Nevertheless, the likelihood of taking sick leave is increased. Among work-related factors, psychosocial work characteristics have the strongest relation with productivity loss, mostly with performance while at work.

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

Experimental estimation of energy absorption during heel strike in human barefoot walking.

PubMed

Baines, Patricia M; Schwab, A L; van Soest, A J

2018-01-01

Metabolic energy expenditure during human gait is poorly understood. Mechanical energy loss during heel strike contributes to this energy expenditure. Previous work has estimated the energy absorption during heel strike as 0.8 J using an effective foot mass model. The aim of our study is to investigate the possibility of determining the energy absorption by more directly estimating the work done by the ground reaction force, the force-integral method. Concurrently another aim is to compare this method of direct determination of work to the method of an effective foot mass model. Participants of our experimental study were asked to walk barefoot at preferred speed. Ground reaction force and lower leg kinematics were collected at high sampling frequency (3000 Hz; 1295 Hz), with tight synchronization. The work done by the ground reaction force is 3.8 J, estimated by integrating this force over the foot-ankle deformation. The effective mass model is improved by dropping the assumption that foot-ankle deformation is maximal at the instant of the impact force peak. On theoretical grounds it is clear that in the presence of substantial damping that peak force and peak deformation do not occur simultaneously. The energy absorption results, due the vertical force only, corresponding to the force-integral method is similar to the results of the improved application of the effective mass model (2.7 J; 2.5 J). However the total work done by the ground reaction force calculated by the force-integral method is significantly higher than that of the vertical component alone. We conclude that direct estimation of the work done by the ground reaction force is possible and preferable over the use of the effective foot mass model. Assuming that energy absorbed is lost, the mechanical energy loss of heel strike is around 3.8 J for preferred walking speeds (≈ 1.3 m/s), which contributes to about 15-20% of the overall metabolic cost of transport.

Software Product Data (SPD) Current Environment Report

DOT National Transportation Integrated Search

1990-04-01

This report describes the Air Force organization and functions employed in the acquisition, use, and management of Software Product Data (SPD). The flow of data among the Air Force and contractors during the design, development, and post-production p...

Work and power outputs determined from pedalling and flywheel friction forces during brief maximal exertion on a cycle ergometer.

PubMed

Hibi, N; Fujinaga, H; Ishii, K

1996-01-01

Work and power outputs during short-term, maximal exertion on a friction loaded cycle ergometer are usually calculated from the friction force applied to the flywheel. The inertia of the flywheel is sometimes taken into consideration, but the effects of internal resistances and other factors have been ignored. The purpose of this study was to estimate their effects by comparing work or power output determined from the force exerted on the pedals (pedalling force) with work or power output determined from the friction force and the moment of inertia of the rotational parts. A group of 22 male college students accelerated a cycle ergometer as rapidly as possible for 3 s. The total work output determined from the pedalling force (TWp) was significantly greater than that calculated from the friction force and the moment of inertia (TWf). Power output determined from the pedalling force during each pedal stroke (SPp) was also significantly greater than that calculated from the friction force and the moment of inertia. Percentage difference (% diff), defined by % diff = ¿(TWp - TWf)/TWf¿ x 100, ranged from 16.8% to 49.3% with a mean value of 30.8 (SD 9.1)%. It was observed that % diff values were higher in subjects with greater TWp or greater maximal SPp. These results would indicate that internal resistances and other factors, such as the deformation of the chain and the vibrations of the entire system, may have significant effects on the measurements of work and power outputs. The effects appear to depend on the magnitudes of pedalling force and pedal velocity.

Work in America: Implications for Families. Hearing before the Select Committee on Children, Youth, and Families. House of Representatives, Ninety-Ninth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

This hearing explored the value of work, and how changes in the economy and the composition of the work force have affected families. Witnesses (1) reported data on such topics as the kinds of jobs currently available, women's participation in the work force, unemployment, and labor force growth over the next decade; (2) argued that the economy is…

SPATIAL DISTRIBUTION OF PAIR PRODUCTION OVER THE PULSAR POLAR CAP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belyaev, Mikhail A.; Parfrey, Kyle, E-mail: mbelyaev@berkeley.edu

2016-10-20

Using an analytic, axisymmetric approach that includes general relativity, coupled to a condition for pair production deduced from simulations, we derive general results about the spatial distribution of pair-producing field lines over the pulsar polar cap. In particular, we show that pair production on magnetic field lines operates over only a fraction of the polar cap for an aligned rotator for general magnetic field configurations, assuming the magnetic field varies spatially on a scale that is larger than the size of the polar cap. We compare our result to force-free simulations of a pulsar with a dipole surface field andmore » find excellent agreement. Our work has implications for first-principles simulations of pulsar magnetospheres and for explaining observations of pulsed radio and high-energy emission.« less

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M; Ludtka, Gail M; Wilgen, John B; Murphy, Bart L

2014-05-20

A carriage for high magnetic field environments includes a first work-piece holding means for holding a first work-piece, the first work-piece holding means being disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla. The first work-piece holding means is further disposed in operable connection with a second work-piece holding means for holding a second work-piece so that, as the first work-piece is inserted into the magnetic field, the second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

Effects of ageing on orofacial fine force control and its relationship with parallel change in sensory perception.

PubMed

Etter, Nicole M; Mckeon, Patrick O; Dressler, Emily V; Andreatta, Richard D

2017-05-03

Current theoretical models suggest the importance of a bidirectional relationship between sensation and production in the vocal tract to maintain lifelong speech skills. The purpose of this study was to assess age-related changes in orofacial skilled force production and to begin defining the orofacial perception-action relationship in healthy adults. Low-level orofacial force control measures (reaction time, rise time, peak force, mean hold force (N) and force hold SD) were collected from 60 adults (19-84 years). Non-parametric Kruskal Wallis tests were performed to identify statistical differences between force and group demographics. Non-parametric Spearman's rank correlations were completed to compare force measures against previously published sensory data from the same cohort of participants. Significant group differences in force control were found for age, sex, speech usage and smoking status. Significant correlational relationships were identified between labial vibrotactile thresholds and several low-level force control measures collected during step and ramp-and-hold conditions. These findings demonstrate age-related alterations in orofacial force production. Furthermore, correlational analysis suggests as vibrotactile detection thresholds increase, the ability to maintain low-level force control accuracy decreases. Possible clinical applications and treatment consequences of these findings for speech disorders in the ageing population are provided.

The effect of aircraft control forces on pilot performance during instrument landings in a flight simulator.

PubMed

Hewson, D J; McNair, P J; Marshall, R N

2001-07-01

Pilots may have difficulty controlling aircraft at both high and low force levels due to larger variability in force production at these force levels. The aim of this study was to measure the force variability and landing performance of pilots during an instrument landing in a flight simulator. There were 12 pilots who were tested while performing 5 instrument landings in a flight simulator, each of which required different control force inputs. Pilots can produce the least force when pushing the control column to the right, therefore the force levels for the landings were set relative to each pilot's maximum aileron-right force. The force levels for the landings were 90%, 60%, and 30% of maximal aileron-right force, normal force, and 25% of normal force. Variables recorded included electromyographic activity (EMG), aircraft control forces, aircraft attitude, perceived exertion and deviation from glide slope and heading. Multivariate analysis of variance was used to test for differences between landings. Pilots were least accurate in landing performance during the landing at 90% of maximal force (p < 0.05). There was also a trend toward decreased landing performance during the landing at 25% of normal force. Pilots were more variable in force production during the landings at 60% and 90% of maximal force (p < 0.05). Pilots are less accurate at performing instrument landings when control forces are high due to the increased variability of force production. The increase in variability at high force levels is most likely associated with motor unit recruitment, rather than rate coding. Aircraft designers need to consider the reduction in pilot performance at high force levels, as well as pilot strength limits when specifying new standards.

Automating Mapping Production for the Enterprise: from Contract to Delivery

NASA Astrophysics Data System (ADS)

Uebbing, R.; Xie, C.; Beshah, B.; Welter, J.

2012-07-01

The ever increasing volume and quality of geospatial data has created new challenges for mapping companies. Due to increased image resolution, fusion of different data sources and more frequent data update requirements, mapping production is forced to streamline the work flow to meet client deadlines. But the data volume alone is not the only barrier for an efficient production work flow. Processing geospatial information traditionally uses domain and vendor specific applications that do not interface with each other, often leading to data duplication and therefore creating sources for error. Also, it creates isolation between different departments within a mapping company resulting in additional communication barriers. North West Geomatics has designed and implemented a data centric enterprise solution for the flight acquisition and production work flow to combat the above challenges. A central data repository containing not only geospatial data in the strictest sense such as images, vector layers and 3D point clouds, but also other information such as product specifications, client requirements, flight acquisition data, production resource usage and much more has been deployed at the company. As there is only one instance of the database shared throughout the whole organization it allows all employees, given they have been granted the appropriate permission, to view the current status of any project with a graphical and table based interface through its life cycle from sales, through flight acquisition, production and product delivery. Not only can users track progress and status of various work flow steps, but the system also allows users and applications to actively schedule or start specific production steps such as data ingestion and triangulation with many other steps (orthorectification, mosaicing, accounting, etc.) in the planning stages. While the complete system is exposed to the users through a web interface and therefore allowing outside customers to also view their data, much of the design and development was focused on work flow automation, scalability and security. Ideally, users will interact with the system to retrieve a specific project status and summaries while the work flow processes are triggered automatically by modeling their dependencies. The enterprise system is built using open source technologies (PostGIS, Hibernate, OpenLayers, GWT and others) and adheres to OGC web services for data delivery (WMS/WFS/WCS) to third party applications.

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2012

2012-01-01

The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

ERIC Educational Resources Information Center

Kimzey, Reed T.; Prince, Samuel M. O.

The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

Verifying Operational and Developmental Air Force Weather Cloud Analysis and Forecast Products Using Lidar Data from Department of Energy Atmospheric Radiation Measurement (ARM) Sites

NASA Astrophysics Data System (ADS)

Hildebrand, E. P.

2017-12-01

Air Force Weather has developed various cloud analysis and forecast products designed to support global Department of Defense (DoD) missions. A World-Wide Merged Cloud Analysis (WWMCA) and short term Advected Cloud (ADVCLD) forecast is generated hourly using data from 16 geostationary and polar-orbiting satellites. Additionally, WWMCA and Numerical Weather Prediction (NWP) data are used in a statistical long-term (out to five days) cloud forecast model known as the Diagnostic Cloud Forecast (DCF). The WWMCA and ADVCLD are generated on the same polar stereographic 24 km grid for each hemisphere, whereas the DCF is generated on the same grid as its parent NWP model. When verifying the cloud forecast models, the goal is to understand not only the ability to detect cloud, but also the ability to assign it to the correct vertical layer. ADVCLD and DCF forecasts traditionally have been verified using WWMCA data as truth, but this might over-inflate the performance of those models because WWMCA also is a primary input dataset for those models. Because of this, in recent years, a WWMCA Reanalysis product has been developed, but this too is not a fully independent dataset. This year, work has been done to incorporate data from external, independent sources to verify not only the cloud forecast products, but the WWMCA data itself. One such dataset that has been useful for examining the 3-D performance of the cloud analysis and forecast models is Atmospheric Radiation Measurement (ARM) data from various sites around the globe. This presentation will focus on the use of the Department of Energy (DoE) ARM data to verify Air Force Weather cloud analysis and forecast products. Results will be presented to show relative strengths and weaknesses of the analyses and forecasts.

Measuring Thermoforming Behaviour

NASA Astrophysics Data System (ADS)

Michaeli, W.; Hopmann, C.; Ederleh, L.; Begemann, M.

2011-05-01

Thermoforming is the process of choice for manufacturing thin-gauge or large-area parts for packaging or technical applications. The process allows low-weight parts to be produced rapidly and economically from thermoplastic semi-finished products. A technical and consequently economical problem is the choice of the right material in combination with the thermoformability of the product. The prediction of thermoformability includes the aspired product features and geometry and defined wall thickness distributions, depending on the specific stretchability of the semifinished product. In practice, thermoformability is estimated by empirical tests with the particular semi-finished product using e.g. staged pyramidal moulds or model cars. With this method, it still cannot be ensured that the product can be thermoformed with the intended properties. A promising alternative is the forming simulation using finite element analysis (FEA). For the simulation, it is necessary to describe the material behaviour using defined material models and the appropriate parameters. Therefore, the stress-/strain-behaviour of the semi-finished product under defined conditions is required. There are several, entirely different measurement techniques used in industry and at research facilities. This paper compares a choice of different measurement techniques to provide an objective basis for future work and research. The semi-finished products are examined with the Membrane-Inflation-Rheometer (MIR), an equibiaxial strain rheometer. A flat sample is heated to the desired temperature in silicone oil. During the measurement, a servohydraulic linear drive advances a piston, thus displacing the hot silicone oil and inflating the specimen to form a sphere. Further measurements are carried out with the Karo IV Laboratory Stretching Machine at Brückner Maschinenbau GmbH & Co. KG, Siegsdorf, Germany. The samples are heated using hot air. During the biaxial stretching, the resulting forces at the clamps are measured. These techniques are compared to the stretching device developed at IKV. This measuring device is integrated into a laboratory thermoforming machine, which allows a close-to-real-process heating, handling and forming of the semi-finished products. After the heating with IR-radiation, force-displacement data is measured during the equibiaxial deformation. This work shows the differences between these methods and emphasises the particular benefits. Further measurement methods, like uniaxial tensile tests and plug deformation, and the effects on the forming simulation will be part of future research.

Systems approach used in the Gas Centrifuge Enrichment Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rooks, W.A. Jr.

A requirement exists for effective and efficient transfer of technical knowledge from the design engineering team to the production work force. Performance-Based Training (PBT) is a systematic approach to the design, development, and implementation of technical training. This approach has been successfully used by the US Armed Forces, industry, and other organizations. The advantages of the PBT approach are: cost-effectiveness (lowest life-cycle training cost), learning effectiveness, reduced implementation time, and ease of administration. The PBT process comprises five distinctive and rigorous phases: Analysis of Job Performance, Design of Instructional Strategy, Development of Training Materials and Instructional Media, Validation of Materialsmore » and Media, and Implementation of the Instructional Program. Examples from the Gas Centrifuge Enrichment Plant (GCEP) are used to illustrate the application of PBT.« less

Observation of the wing deformation and the CFD study of cicada

NASA Astrophysics Data System (ADS)

Dai, Hu; Mohd Adam Das, Shahrizan; Luo, Haoxiang

2011-11-01

We studied the wing properties and kinematics of cicada when the 13-year species emerged in amazingly large numbers in middle Tennessee during May 2011. Using a high-speed camera, we recorded the wing motion of the insect and then reconstructed the three-dimensional wing kinematics using a video digitization software. Like many other insects, the deformation of the cicada wing is asymmetric between the downstroke and upstroke half cycles, and this particular deformation pattern would benefit production of the lift and propulsive forces. Both two-dimensional and three-dimensional CFD studies are carried out based on the reconstructed wing motion. The implication of the study on the role of the aerodynamic force in the wing deformation will be discussed. This work is sponsored by the NSF.

Downsizing: Is There a "Right" Way?

NASA Technical Reports Server (NTRS)

Tippett, Donald D.; Childress, Rhonda; Sweitzer, Melissa G

1998-01-01

In response to the pressures of surviving in in a competitive global market, many companies are turning to downsizing, right sizing, restructuring, reduction-in-force, and/or business process re-engineering, among others. Regardless of the terminology used, an inevitable result is a loss of jobs. Companies fail to grasp the profound ramifications of downsizing for both the people laid off and the organization and work force that remain after downsizing is complete. A search of the literature was conducted to ascertain what leading theorists and practitioners are saying about downsizing and the "right" way to go about it. This search culminated in the Nine Point Model for Downsizing (NPMD). The model is used to analyze a downsizing case study involving the December 1997 layoff of 19.000 employees by a leading manufacturer of imagine products.

Principles of time evolution in classical physics

NASA Astrophysics Data System (ADS)

Güémez, J.; Fiolhais, M.

2018-07-01

We address principles of time evolution in classical mechanical/thermodynamical systems in translational and rotational motion, in three cases: when there is conservation of mechanical energy, when there is energy dissipation and when there is mechanical energy production. In the first case, the time derivative of the Hamiltonian vanishes. In the second one, when dissipative forces are present, the time evolution is governed by the minimum potential energy principle, or, equivalently, maximum increase of the entropy of the universe. Finally, in the third situation, when internal sources of work are available to the system, it evolves in time according to the principle of minimum Gibbs function. We apply the Lagrangian formulation to the systems, dealing with the non-conservative forces using restriction functions such as the Rayleigh dissipative function.

Influence of the formulations in removing eggs of Pediculus humanus capitis (Phthiraptera: Pediculidae).

PubMed

Ortega-Insaurralde, Isabel; Toloza, Ariel Ceferino; Picollo, María Inés; Vassena, Claudia

2014-09-01

Head lice lay eggs in human head hairs in order to reproduce. There is a difficulty associated to the process of detaching these eggs: they are tightly gripped to the hair by a secretion produced by female head lice. The physical removal of eggs has become an important part of treatment of louse infestations. The finding of new products to loosen the eggs is necessary to avoid mistaken diagnosis or reinfestations. This work aimed to compare different kinds of pediculicide formulations in order to find if their presentations represented differences in the egg remover effect. We also wanted to present a new device to test the efficacy of the egg remover formulations. Products with creamy presentations (Bio infant lice and egg remover and hair conditioner) and one containing dimethicone (Nyda) showed the lower mean forces compared with the control (lower mean forces represented best removal activity). Whereas, the Biferdil egg remover (gel) and Nopucid Tribit (hydroalcoholic lotion) had no egg removal effect, presenting the highest mean forces (177.82 and 189.99 mN, respectively) compared with the control. Additionally, we proposed a removal index (RI) to compare the efficacy of different products on the egg removal activity (RI > 0, good performance). The higher index values were for Bio infant lice and egg remover (0.72) and Biferdil hair conditioner (0.58). The lowest index values were for Biferdil egg remover (-0.26) and Nopucid Tribit (-0.35).The formulation of over the counter pediculicides in the egg remover effect was discussed.

32 CFR 811.6 - Visual information product/material loans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 811.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE SALES AND... product/material loans. (a) You may request unclassified and classified copies of current Air Force productions and loans of DoD and other Federal productions from JVISDA, ATTN: ASQV-JVIA-T-AS, Bldg. 3, Bay 3...

32 CFR 811.6 - Visual information product/material loans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 811.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE SALES AND... product/material loans. (a) You may request unclassified and classified copies of current Air Force productions and loans of DoD and other Federal productions from JVISDA, ATTN: ASQV-JVIA-T-AS, Bldg. 3, Bay 3...

Military duty: risk factor for preterm labor? A review.

PubMed

McNeary, A M; Lomenick, T S

2000-08-01

The female military population represents a high-risk group for preterm labor and other adverse pregnancy outcomes. As the number of women entering the armed forces continues to increase, concerns regarding the effects of military service on pregnancy must persist. Although active duty females have access to prenatal care and maintain consistent follow-up, previous research has noted a 5-fold increase in preterm labor compared with civilian working women. Hospitalization and loss of work attributable to pregnancy complications directly affect productivity and mission accomplishment; therefore, it is crucial to identify those at risk to institute measures that will prevent such occurrences and decrease time away from work. This article provides a review of the existing literature concerning preterm labor in military women, comparisons with the civilian population, and recommendations for future research.

[The Brazilian economy in the 80's and its impact on the living conditions of the population].

PubMed

Ometto, A M; Furtuoso, M C; da Silva, M V

1995-10-01

In the 80's the Brazilian economy underwent one of the most severe crises of its history, resulting in the stagnation of the gross national product and inflation rates such as never previously reported. Despite this unfavorable scenario social indicators have presented a positive evolution. This work shows that although the Brazilian family has adopted the over-use of the family work force as a strategy for facing this crisis on the work market, the evolution of both income and poverty in that period were poor. The increase of expenses and the transformation of the forms of implementation of public policy in the health and nutrition areas are shown to be decisive factors in the performance of social indicators.

Scholarly productivity for nursing clinical track faculty.

PubMed

Tschannen, Dana; Anderson, Christine; Strobbe, Stephen; Bay, Esther; Bigelow, April; Dahlem, Chin Hwa Gina Y; Gosselin, Ann K; Pollard, Jennifer; Seng, Julia S

2014-01-01

Recent years have yielded substantial advancement by clinical track faculty in cohort expansion and collective contributions to the discipline of nursing. As a result, standards for progression and promotion for clinical faculty need to be more fully developed, articulated, and disseminated. Our school formed a task force to examine benchmarks for the progression and promotion of clinical faculty across schools of nursing, with the goal of guiding faculty, reviewers, and decision makers about what constitutes excellence in scholarly productivity. Results from analyses of curriculum vitae of clinical professors or associate professors at six universities with high research activity revealed a variety of productivity among clinical track members, which included notable diversity in the types of scholarly products. Findings from this project help quantify types of scholarship for clinical faculty at the time of promotion. This work provides a springboard for greater understanding of the contributions of clinical track faculty to nursing practice. Copyright © 2014 Elsevier Inc. All rights reserved.

Force-Time Entropy of Isometric Impulse.

PubMed

Hsieh, Tsung-Yu; Newell, Karl M

2016-01-01

The relation between force and temporal variability in discrete impulse production has been viewed as independent (R. A. Schmidt, H. Zelaznik, B. Hawkins, J. S. Frank, & J. T. Quinn, 1979 ) or dependent on the rate of force (L. G. Carlton & K. M. Newell, 1993 ). Two experiments in an isometric single finger force task investigated the joint force-time entropy with (a) fixed time to peak force and different percentages of force level and (b) fixed percentage of force level and different times to peak force. The results showed that the peak force variability increased either with the increment of force level or through a shorter time to peak force that also reduced timing error variability. The peak force entropy and entropy of time to peak force increased on the respective dimension as the parameter conditions approached either maximum force or a minimum rate of force production. The findings show that force error and timing error are dependent but complementary when considered in the same framework with the joint force-time entropy at a minimum in the middle parameter range of discrete impulse.

A Randomized Controlled Trial to Improve the Success of Women Assistant Professors.

PubMed

Grisso, Jeane Ann; Sammel, Mary Dupuis; Rubenstein, Arthur H; Speck, Rebecca M; Conant, Emily F; Scott, Patricia; Tuton, Lucy Wolf; Westring, Alyssa Friede; Friedman, Stewart; Abbuhl, Stephanie B

2017-05-01

Given the persistent disparity in the advancement of women compared with men faculty in academic medicine, it is critical to develop effective interventions to enhance women's careers. We carried out a cluster-randomized, multifaceted intervention to improve the success of women assistant professors at a research-intensive medical school. Twenty-seven departments/divisions were randomly assigned to intervention or control groups. The three-tiered intervention included components that were aimed at (1) the professional development of women assistant professors, (2) changes at the department/division level through faculty-led task forces, and (3) engagement of institutional leaders. Generalized linear models were used to test associations between assignment and outcomes, adjusting for correlations induced by the clustered design. Academic productivity and work self-efficacy improved significantly over the 3-year trial in both intervention and control groups, but the improvements did not differ between the groups. Average hours worked per week declined significantly more for faculty in the intervention group as compared with the control group (-3.82 vs. -1.39 hours, respectively, p = 0.006). The PhD faculty in the intervention group published significantly more than PhD controls; however, no differences were observed between MDs in the intervention group and MDs in the control group. Significant improvements in academic productivity and work self-efficacy occurred in both intervention and control groups, potentially due to school-wide intervention effects. A greater decline in work hours in the intervention group despite similar increases in academic productivity may reflect learning to "work smarter" or reveal efficiencies brought about as a result of the multifaceted intervention. The intervention appeared to benefit the academic productivity of faculty with PhDs, but not MDs, suggesting that interventions should be more intense or tailored to specific faculty groups.

Library and Information Services for Literacy, Productivity and Democracy. Joint Hearing before the Subcommittee on Education, Arts and Humanities of the Committee on Labor and Human Resources, United States Senate, and the Subcommittee on Labor-Management Relations of the Committee on Education and Labor, House of Representatives. One Hundred Second Congress, First Session. Oversight Hearing at the White House Conference on Library and Information Services.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

The oversight hearing at the second White House Conference on Library and Information Services (WHCLIS2) focuses on the role of the library in three major areas addressed by conference presenters: a literate work force; the productivity to compete in the international marketplace in the 21st century; and a populace fully equipped to participate in…

JPRS Report East Asia Southeast Asia

DTIC Science & Technology

1987-06-05

and cures —an important endeavor aimed at keeping the work force in good shape. However, that activity is being marred by difficulties, which should be...apiarists. Now Hanoi’s annual output amounts to 3-50 tons of honey gathered from more than 3,200 swarms. Thousands of apiaries have taken shape in 12...close-cycle production to harvest dozens of tons of honey -a year. Blessed by nature and a wide variety of wild and fruit trees whose blossom seasons

Aircraft Modifications: Assessing the Current State of Air Force Aircraft Modifications and the Implications for Future Military Capability

DTIC Science & Technology

2007-01-25

Air, Space , and Cyberspace." Introduction 3 group production lots together into ’spirals’ or ’increments’. These groupings, as well as an increased...important reference point for this work. The analysis of the modification process presented in this reserach , however, does help shed light on the...planning efforts. Chapter 7- The Future of Aircraft Modifications "Strategy is the art of making use of time and space . I am less concerned about the

Effects of L-Alanine and Inosine Germinants on the Elasticity of Bacillus anthracis Spores

DTIC Science & Technology

2010-01-22

there was some scanner hysteresis and drift in the detection system, we often observed that the deflection of the free cantilever was not equal to zero...of waste products.5,35 The degradation of the spore coat resulted in a cell that could bemore easily indented by the AFMprobe, as was observed on...changes in the mechanical properties of the spore. In this work, we use atomic force microscopy (AFM) to characterize the mechanical properties of the

Participatory ergonomics intervention for improving work-related musculoskeletal disorders in the 'One Tambon One Product' industry in Thailand.

PubMed

Hongsranagon, Prathurng; Somana, Yaowanit; Maha-Udomporn, Somkiet; Siriwong, Wattasit; Havanond, Piyalamporn; Deelertyuenyong, Nathawan; Petchprasit, Viroj; Munkatunyu, Nantawadee; Saksri, Pramrudee

2011-12-01

This paper relates to the first phase one of a three-phase study. Phase 1 investigated and identified risk factors for work-related musculoskeletal disorders (WMSDs) in 26 'One Tambon One Product' (OTOP) groups working in the informal sector. Data was collected from 93 participants in Khangkoi District, Saraburi Province, Thailand during 2009-2010. Results of inspections and direct observations of work places and interviews of managers and workers showed risk factors related to posture, repetition, force and duration in the workers' operations and the application of a checklist revealed that the OTOP groups had simple work processes. A knowledge-attitude-practice survey of managers and workers indicated that there was a moderate to high awareness regarding ergonomics and occupational safety and health principles and approximately 15% of workers reported WMSDs at a moderate level, mainly associated with lower back and shoulder pains, due to protracted periods of sitting. Specific recommendations in response to OTOP conditions and needs were made. The second phase of the study involves a participatory ergonomics worksite intervention by a number of stakeholders and the final phase deals with an evaluation of the intervention and an establishment of guidelines for ergonomics programs for OTOP groups.

The Pharmaceutical Capping Process-Correlation between Residual Seal Force, Torque Moment, and Flip-off Removal Force.

PubMed

Mathaes, Roman; Mahler, Hanns-Christian; Vorgrimler, Lothar; Steinberg, Henrik; Dreher, Sascha; Roggo, Yves; Nieto, Alejandra; Brown, Helen; Roehl, Holger; Adler, Michael; Luemkemann, Joerg; Huwyler, Joerg; Lam, Philippe; Stauch, Oliver; Mohl, Silke; Streubel, Alexander

2016-01-01

The majority of parenteral drug products are manufactured in glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. Different critical capping process parameters can affect rubber stopper defects, rubber stopper compression, container closure integrity, and also crimp cap quality. A sufficiently high force to remove the flip-off button prior to usage is required to ensure quality of the drug product unit by the flip-off button during storage, transportation, and until opening and use. Therefore, the final product is 100% visually inspected for lose or defective crimp caps, which is subjective as well as time- and labor-intensive. In this study, we sealed several container closure system configurations with different capping equipment settings (with corresponding residual seal force values) to investigate the torque moment required to turn the crimp cap. A correlation between torque moment and residual seal force has been established. The torque moment was found to be influenced by several parameters, including diameter of the vial head, type of rubber stopper (serum or lyophilized) and type of crimp cap (West(®) or Datwyler(®)). In addition, we measured the force required to remove the flip-off button of a sealed container closure system. The capping process had no influence on measured forces; however, it was possible to detect partially crimped vials. In conclusion, a controlled capping process with a defined target residual seal force range leads to a tight crimp cap on a sealed container closure system and can ensure product quality. The majority of parenteral drug products are manufactured in a glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. An adequate force to remove the flip-off button prior to usage is required to ensure product quality during storage and transportation until use. In addition, the complete crimp cap needs to be fixed in a tight position on the vial. In this study, we investigated the torque moment required to turn the crimp cap and the force required to remove the flip-off button of container closure system sealed with different capping equipment process parameters (having different residual seal force values). © PDA, Inc. 2016.

Women of Hispanic Origin in the Labor Force. Facts on Working Women No. 89-1 = La mujer de origen hispano en la fuerza laboral. Facts on Working Women Num. 89-1S.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

Data on Hispanic women in the labor force between 1978 and 1988 show the following: (1) 6.5 percent of the women in the work force in 1988 were of Hispanic origin (3.6 million); (2) the median age of Hispanic women was 26.1 years, 2-5 years younger than Black or White women; (3) 66 percent of Hispanic women participate in the labor force, a higher…

Snow driven Radiative Forcing in High Latitude Areas of Disturbance Using Higher Resolution Albedo Products from Landsat and Sentinel-2

NASA Astrophysics Data System (ADS)

Erb, A.; Li, Z.; Schaaf, C.; Wang, Z.; Rogers, B. M.

2017-12-01

Land surface albedo plays an important role in the surface energy budget and radiative forcing by determining the proportion of absorbed incoming solar radiation available to drive photosynthesis and surface heating. In Arctic regions, albedo is particularly sensitive to land cover and land use change (LCLUC) and modeling efforts have shown it to be the primary driver of effective radiative forcing from the biogeophysical effects of LCLUC. In boreal forests, the effects of these changes are complicated during snow covered periods when newly exposed, highly reflective snow can serve as the primary driver of radiative forcing. In Arctic biomes disturbance scars from fire, pest and harvest can remain in the landscape for long periods of time. As such, understanding the magnitude and persistence of these disturbances, especially in the shoulder seasons, is critical. The Landsat and Sentinel-2 Albedo Products couple 30m and 20m surface reflectances with concurrent 500m BRDF Products from the MODerate resolution Imaging Spectroradiometer (MODIS). The 12 bit radiometric fidelity of Sentinel-2 and Landsat-8 allow for the inclusion of high-quality, unsaturated albedo calculations over snow covered surfaces at scales more compatible with fragmented landscapes. Recent work on the early spring albedo of fire scars has illustrated significant post-fire spatial heterogeneity of burn severity at the landscape scale and highlights the need for a finer spatial resolution albedo record. The increased temporal resolution provided by multiple satellite instruments also allows for a better understanding of albedo dynamics during the dynamic shoulder seasons and in historically difficult high latitude locations where persistent cloud cover limits high quality retrievals. Here we present how changes in the early spring albedo of recent boreal forest disturbance in Alaska and central Canada affects landscape-scale radiative forcing. We take advantage of the long historical Landsat record to examine pre-disturbance albedo trends and to link historical land cover and disturbance history to post-disturbance early spring albedo values. We examine the impact of landscape heterogeneity on albedo in the growing and dormant seasons and quantify the effects of snow exposure changes from over-story canopy loss.

The Prediction of the Work of Friction Force on the Arbitrary Path

ERIC Educational Resources Information Center

Matehkolaee, Mehdi Jafari; Majidian, Kourosh

2013-01-01

In this paper we have calculated the work of friction force on the arbitrary path. In our method didn't use from energy conservative conceptions any way. The distinction of this procedure is that at least do decrease measurement on the path once. Thus we can forecast the amount of work of friction force without information about speed of…

Overexpression of antioxidant enzymes in diaphragm muscle does not alter contraction-induced fatigue or recovery

PubMed Central

McClung, Joseph M.; DeRuisseau, Keith C.; Whidden, Melissa A.; Van Remmen, Holly; Richardson, Arlan; Song, Wook; Vrabas, Ioannis S.; Powers, Scott K.

2010-01-01

Low levels of reactive oxygen species (ROS) production are necessary to optimize muscle force production in unfatigued muscle. In contrast, sustained high levels of ROS production have been linked to impaired muscle force production and contraction-induced skeletal muscle fatigue. Using genetically engineered mice, we tested the hypothesis that the independent transgenic overexpression of catalase (CAT), copper/zinc superoxide dismutase (CuZnSOD; SOD1) or manganese superoxide dismutase (MnSOD; SOD2) antioxidant enzymes would negatively affect force production in unfatigued diaphragm muscle but would delay the development of muscle fatigue and enhance force recovery after fatiguing contractions. Diaphragm muscle from wild-type littermates (WT) and from CAT, SOD1 and SOD2 overexpressing mice were subjected to an in vitro contractile protocol to investigate the force–frequency characteristics, the fatigue properties and the time course of recovery from fatigue. The CAT, SOD1 and SOD2 overexpressors produced less specific force (in N cm−2) at stimulation frequencies of 20–300 Hz and produced lower maximal tetanic force than WT littermates. The relative development of muscle fatigue and recovery from fatigue were not influenced by transgenic overexpression of any antioxidant enzyme. Morphologically, the mean cross-sectional area (in μm2) of diaphragm myofibres expressing myosin heavy chain type IIA was decreased in both CAT and SOD2 transgenic animals, and the percentage of non-contractile tissue increased in diaphragms from all transgenic mice. In conclusion, our results do not support the hypothesis that overexpression of independent antioxidant enzymes protects diaphragm muscle from contraction-induced fatigue or improves recovery from fatigue. Moreover, our data are consistent with the concept that a basal level of ROS is important to optimize muscle force production, since transgenic overexpression of major cellular antioxidants is associated with contractile dysfunction. Finally, the transgenic overexpression of independent endogenous antioxidants alters diaphragm skeletal muscle morphology, and these changes may also contribute to the diminished specific force production observed in these animals. PMID:19783618

Canine Supply for Physical Security: An Analysis of the Royal Australian Air Force Military Working Dog Program

DTIC Science & Technology

2016-03-01

PHYSICAL SECURITY: AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM by Mark W. Powell March 2016 Thesis...AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Mark W. Powell 7. PERFORMING...increased demand on its physical security elements. Its military working dog (MWD) workforce is required to meet an inventory of 204 by end of year 2023 as

NASA AETC Test Technology Subproject

NASA Technical Reports Server (NTRS)

Bell, James

2017-01-01

Funds directed to improve measurement capabilities (pressure, force, flow, and temperature), test techniques and processes, and develop technologies critical to meeting NASA research needs and applicable to a multitude of facilities. Primarily works by funding small ($40K - $400K) tasks which result in a demonstration or initial capability of a new technology in an AETC facility.TT research and development tasks are generally TRL 3-6; they should be things which work in small scale or lab environments but need further development for use in production facilities.TT differs from CA in its focus on smaller-scale tasks and on instrumentation. Technologies developed by TT may become CA projects in order be fully realized within a facility.

Controlled Synthesis of Atomically Layered Hexagonal Boron Nitride via Chemical Vapor Deposition.

PubMed

Liu, Juanjuan; Kutty, R Govindan; Liu, Zheng

2016-11-29

Hexagonal boron nitrite (h-BN) is an attractive material for many applications including electronics as a complement to graphene, anti-oxidation coatings, light emitters, etc. However, the synthesis of high-quality h-BN is still a great challenge. In this work, via controlled chemical vapor deposition, we demonstrate the synthesis of h-BN films with a controlled thickness down to atomic layers. The quality of as-grown h-BN is confirmed by complementary characterizations including high-resolution transition electron microscopy, atomic force microscopy, Raman spectroscopy and X-ray photo-electron spectroscopy. This work will pave the way for production of large-scale and high-quality h-BN and its applications as well.

Challenging/interesting lignin times

DOE PAGES

Ragauskas, Arthur J.

2016-08-31

Anyone who is working in the fuels industry knows that we are living in challenging times. On a personal note, I recall that ~5 years ago, some of my children's friends headed out into the petroleum industry to start their careers and several have now returned because of the retrenching work force. Despite these challenging times, the cellulosic ethanol industry continues to develop commercial operations, but with today's cost structure, biofuels production facilities have certainly slowed their pace of development and roll-out. Furthermore, the biological technology platform for biorefining plant polysaccharides to biofuels has been reported to have an intrinsicmore » advantage, if it can convert its waste lignin stream to value-added components.[1]« less

Acute pulmonary function change associated with work on large dairies in California.

PubMed

Eastman, Chelsea; Schenker, Marc B; Mitchell, Diane C; Tancredi, Daniel J; Bennett, Deborah H; Mitloehner, Frank M

2013-01-01

To study whether dairy workers in California have lower baseline and greater cross-shift decrements in lung function than control employees. A cross-sectional study of 210 dairy and 47 control workers who completed questionnaires and spirometry before and after the work shift. Dairy work was associated with mean baseline differences of -0.132 L (P = 0.07) and -0.131 L (P = 0.13) in forced expiratory volume in 1 second and forced vital capacity, respectively, compared with control employees, adjusting for age, height, smoking status, and days back at work since last day off. Dairy work was associated with a mean cross-shift difference of -65.2 mL (P = 0.02) and -103.1 mL (P < 0.01) in forced expiratory volume in 1 second and forced vital capacity, respectively, adjusting for smoking status and work-shift time. Dairy work in California was associated with mild acute airway obstruction. The unclear long-term effect of dairy work in California merits further investigation.

Explosive force production during isometric squats correlates with athletic performance in rugby union players.

PubMed

Tillin, Neale Anthony; Pain, Matthew Thomas Gerard; Folland, Jonathan

2013-01-01

This study investigated the association between explosive force production during isometric squats and athletic performance (sprint time and countermovement jump height). Sprint time (5 and 20 m) and jump height were recorded in 18 male elite-standard varsity rugby union players. Participants also completed a series of maximal- and explosive-isometric squats to measure maximal force and explosive force at 50-ms intervals up to 250 ms from force onset. Sprint performance was related to early phase (≤100 ms) explosive force normalised to maximal force (5 m, r = -0.63, P = 0.005; and 20 m, r = -0.54, P = 0.020), but jump height was related to later phase (>100 ms) absolute explosive force (0.51 < r < 0.61; 0.006 < P < 0.035). When participants were separated for 5-m sprint time (< or ≥ 1s), the faster group had greater normalised explosive force in the first 150 ms of explosive-isometric squats (33-67%; 0.001 < P < 0.017). The results suggest that explosive force production during isometric squats was associated with athletic performance. Specifically, sprint performance was most strongly related to the proportion of maximal force achieved in the initial phase of explosive-isometric squats, whilst jump height was most strongly related to absolute force in the later phase of the explosive-isometric squats.

Forces acting between polishing tool and workpiece surface in magnetorheological finishing

NASA Astrophysics Data System (ADS)

Schinhaerl, Markus; Vogt, Christian; Geiss, Andreas; Stamp, Richard; Sperber, Peter; Smith, Lyndon; Smith, Gordon; Rascher, Rolf

2008-08-01

Magnetorheological finishing is a computer-controlled polishing technique that is used mainly in the field of high-quality optical lens production. The process is based on the use of a magnetorheological polishing fluid that is able, in a reversible manner, to change its viscosity from a liquid state to a solid state under the control of a magnetic field. This outstanding characteristic facilitates rapid control (in milliseconds) of the yield stress, and thus the pressure applied to the workpiece surface to be polished. A three-axis dynamometer was used to measure the forces acting between the magnetorheological fluid and the workpiece surface during determination of the material removal characteristic of the polishing tool (influence function). The results of a testing series using a QED Q22-X MRF polishing machine with a 50 mm wheel assembly show that the normal forces range from about 2 to 20 N. Knowledge of the forces is essential, especially when thin workpieces are to be polished and distortion becomes significant. This paper discusses, and gives examples of, the variation in the parameters experienced during a programme of experiments, and provides examples of the value of this work.

Production of isometric forces during sustained acceleration.

PubMed

Sand, D P; Girgenrath, M; Bock, O; Pongratz, H

2003-06-01

The operation of high-performance aircraft requires pilots to apply finely graded forces on controls. Since they are often exposed to high levels of acceleration in flight, we investigated to what extent this ability is degraded in such an environment. Twelve healthy non-pilot volunteers were seated in the gondola of a centrifuge and their performance was tested at normal gravity (1 G) and while exposed to sustained forces of 1.5 G and 3 G oriented from head to foot (+Gz). Using an isometric joystick, they attempted to produce force vectors with specific lengths and directions commanded in random order by a visual display. Acceleration had substantial effects on the magnitude of produced force. Compared with 1 G, maximum produced force was about 2 N higher at 1.5 G and about 10 N higher at 3 G. The size of this effect was constant across the different magnitudes, but varied with the direction of the prescribed force. Acceleration degrades control of force production. This finding may indicate that the motor system misinterprets the unusual gravitoinertial environment and/or that proprioceptive feedback is degraded due to increased muscle tone. The production of excessive isometric force could affect the safe operation of high-performance aircraft.

Impact of Uncertainties in Meteorological Forcing Data and Land Surface Parameters on Global Estimates of Terrestrial Water Balance Components

NASA Astrophysics Data System (ADS)

Nasonova, O. N.; Gusev, Ye. M.; Kovalev, Ye. E.

2009-04-01

Global estimates of the components of terrestrial water balance depend on a technique of estimation and on the global observational data sets used for this purpose. Land surface modelling is an up-to-date and powerful tool for such estimates. However, the results of modelling are affected by the quality of both a model and input information (including meteorological forcing data and model parameters). The latter is based on available global data sets containing meteorological data, land-use information, and soil and vegetation characteristics. Now there are a lot of global data sets, which differ in spatial and temporal resolution, as well as in accuracy and reliability. Evidently, uncertainties in global data sets will influence the results of model simulations, but to which extent? The present work is an attempt to investigate this issue. The work is based on the land surface model SWAP (Soil Water - Atmosphere - Plants) and global 1-degree data sets on meteorological forcing data and the land surface parameters, provided within the framework of the Second Global Soil Wetness Project (GSWP-2). The 3-hourly near-surface meteorological data (for the period from 1 July 1982 to 31 December 1995) are based on reanalyses and gridded observational data used in the International Satellite Land-Surface Climatology Project (ISLSCP) Initiative II. Following the GSWP-2 strategy, we used a number of alternative global forcing data sets to perform different sensitivity experiments (with six alternative versions of precipitation, four versions of radiation, two pure reanalysis products and two fully hybridized products of meteorological data). To reveal the influence of model parameters on simulations, in addition to GSWP-2 parameter data sets, we produced two alternative global data sets with soil parameters on the basis of their relationships with the content of clay and sand in a soil. After this the sensitivity experiments with three different sets of parameters were performed. As a result, 16 variants of global annual estimates of water balance components were obtained. Application of alternative data sets on radiation, precipitation, and soil parameters allowed us to reveal the influence of uncertainties in input data on global estimates of water balance components.

Skeletal muscle strength and endurance are maintained during moderate dehydration.

PubMed

Périard, J D; Tammam, A H; Thompson, M W

2012-08-01

This study investigated the effects of moderate dehydration (~2.5% body weight) on muscle strength and endurance using percutaneous electrical stimulation to quantify central and peripheral fatigue, and isolate the combined effects of exercise-heat stress and dehydration, vs. the effect of dehydration alone. Force production and voluntary activation were calculated in 10 males during 1 brief and 15 repeated maximal voluntary isometric contractions performed prior to (control) walking in the heat (35°C), immediately following exercise, and the next morning (dehydration). The protocol was also performed in a euhydrated state. During the brief contractions, force production and voluntary activation were maintained in all trials. In contrast, force production decreased throughout the repeated contractions, regardless of hydration status (P<0.001). The decline in force was greater immediately following exercise-heat stress dehydration compared with control and euhydration (P<0.001). When dehydration was isolated from acute post-exercise dehydration, force production was maintained similarly to control and euhydration. Despite the progressive decline in force production and the increased fatigability observed during the repeated contractions, voluntary activation remained elevated throughout each muscle function test. Therefore, moderate dehydration, isolated from acute exercise-heat stress, does not appear to influence strength during a single contraction or enhance fatigability. © Georg Thieme Verlag KG Stuttgart · New York.

Force and work to shear green southern pine logs at slow speed

Treesearch

Peter Koch

1971-01-01

When logs of three diameter classes and two specific gravity classes were sheared with a 3/8-inch-thick knife travelling at 2 inches per minute, shearing force and work averaged greatest for dense 13.6-inch logs cut with a knife having a 45o sharpness angle (73,517 pounds; 49,838 foot-pounds). Force and work averaged at least 5.1-inch bolts of...

Seven Important Labor Force Trends.

ERIC Educational Resources Information Center

Bailey, John A.

1982-01-01

Presents statistics on the changing human resources mix in the labor force, which vocational counselors should be aware of. Trends include higher percentages of women working, and older men and married men leaving the work force. One result is an increasing number of persons are able to retire earlier. (JAC)

Biospheric feedback effects in a synchronously coupled model of human and Earth systems

NASA Astrophysics Data System (ADS)

Thornton, P. E.; Calvin, K. V.; Jones, A. D.; Di Vittorio, A. V.; Bond-Lamberty, B. P.; Chini, L. P.; Shi, X.; Mao, J.; Collins, W. D.; Edmonds, J.; Hurtt, G. C.

2017-12-01

Fossil fuel combustion and land-use change are the two largest contributors to industrial-era increases in atmospheric CO2 concentration. Projections of these are thus fundamental inputs for coupled Earth system models (ESMs) used to estimate the physical and biological consequences of future climate system forcing. While historical datasets are available to inform past and current climate analyses, assessments of future climate change have relied on projections of energy and land use from energy economic models, constrained by assumptions about future policy, land-use patterns, and socio-economic development trajectories. In this work we show that the climatic impacts on land ecosystems drives significant feedbacks in energy, agriculture, land-use, and carbon cycle projections for the 21st century. We find that exposure of human appropriated land ecosystem productivity to biospheric change results in reductions of land area used for crops; increases in managed forest area and carbon stocks; decreases in global crop prices; and reduction in fossil fuel emissions for a low-mid range forcing scenario. Land ecosystem response to increased carbon dioxide concentration, increased anthropogenic nitrogen deposition, and changes in temperature and precipitation all play a role. The feedbacks between climate-induced biospheric change and human system forcings to the climate system demonstrated in this work are handled inconsistently, or excluded altogether, in the one-way asynchronous coupling of energy economic models to ESMs used to date.

Quorum sensing molecules in activated sludge could trigger microalgae lipid synthesis.

PubMed

Zhang, Chaofan; Li, Qingcheng; Fu, Liang; Zhou, Dandan; Crittenden, John C

2018-05-18

Cultivating microalgae using wastewater is an economical strategy to produce biofuel; however, microbial contamination has to be controlled strictly. Microalgae lipid accumulation can be triggered by environmental pressures, and here, we studied whether microbial contamination is the pressure for microalgae. We hypothesized this pressure was forced via cell-to-cell communication with quorum sensing molecules (QSMs). In this work, we verified the impacts of QSMs produced by activated sludge (wastewater-born microbial consortiums) on both lipid content and biomass production of the microalgae Chlorophyta sp., since in combination, they determined lipid productivity. With QSMs stress, the lipid content of Chlorophyta sp. increased by ∼84%, while biomass production decreased only slightly. Consistently, enzymes on the fatty acid synthesis pathways were generally up-regulated, while they were slightly down-regulated for DNA replication. In summary, the total lipid production improved by 86%. These results revealed the positive effects of microbial contamination on microalgae biofuel production. Copyright © 2018 Elsevier Ltd. All rights reserved.

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants

PubMed Central

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-01-01

Objectives Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Methods Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment; (2) work and life under duress; and (3) impossibility to leave employer. Forced labour is positive if any one of the dimensions is positive. Results Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment, 71% work and life under duress and 14% impossibility to leave employer. Overall, 73% experienced forced labour during their most recent labour migration. Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Conclusion Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. PMID:28801409

Optimization model for the allocation of water resources based on the maximization of employment in the agriculture and industry sectors

NASA Astrophysics Data System (ADS)

Habibi Davijani, M.; Banihabib, M. E.; Nadjafzadeh Anvar, A.; Hashemi, S. R.

2016-02-01

In many discussions, work force is mentioned as the most important factor of production. Principally, work force is a factor which can compensate for the physical and material limitations and shortcomings of other factors to a large extent which can help increase the production level. On the other hand, employment is considered as an effective factor in social issues. The goal of the present research is the allocation of water resources so as to maximize the number of jobs created in the industry and agriculture sectors. An objective that has attracted the attention of policy makers involved in water supply and distribution is the maximization of the interests of beneficiaries and consumers in case of certain policies adopted. The present model applies the particle swarm optimization (PSO) algorithm in order to determine the optimum amount of water allocated to each water-demanding sector, area under cultivation, agricultural production, employment in the agriculture sector, industrial production and employment in the industry sector. Based on the results obtained from this research, by optimally allocating water resources in the central desert region of Iran, 1096 jobs can be created in the industry and agriculture sectors, which constitutes an improvement of about 13% relative to the previous situation (non-optimal water utilization). It is also worth mentioning that by optimizing the employment factor as a social parameter, the other areas such as the economic sector are influenced as well. For example, in this investigation, the resulting economic benefits (incomes) have improved from 73 billion Rials at baseline employment figures to 112 billion Rials in the case of optimized employment condition. Therefore, it is necessary to change the inter-sector and intra-sector water allocation models in this region, because this change not only leads to more jobs in this area, but also causes an improvement in the region's economic conditions.

Electron treatment of wood pulp for the viscose process

NASA Astrophysics Data System (ADS)

Stepanik, T. M.; Ewing, D. E.; Whitehouse, R.

2000-03-01

Electron processing is currently being evaluated by several viscose producers for integration into their process. The viscose industry converts dissolving wood pulp into products such as staple fibre, filament, cord, film, packaging, and non-edible sausage casings. These materials are used in the clothing, drapery, hygiene, automobile, food, and packaging industries. Viscose producers are facing increasingly high production costs and stringent environmental regulations that have forced some plants to close. Electron treatment of wood pulp can significantly reduce the amounts of chemicals used for producing viscose and the production of hazardous pollutants. Acsion Industries has worked with companies worldwide to demonstrate the benefits of using electron treated pulp for producing viscose (rayon). This paper describes the viscose process, the benefits of using electron treatment in the viscose process, and Acsion's efforts in developing this technology.

(Un)healthy relationships: African labourers, profits and health services in Angola's colonial-era diamond mines, 1917-75.

PubMed

Varanda, Jorge; Cleveland, Todd

2014-01-01

The Companhia de Diamantes de Angola, or Diamang, mined for diamonds in colonial Angola from 1917 until independence in 1975. The enterprise's Health Services Division (SSD) was responsible for supplying mine managers with an African labour force comprised of healthy, and therefore productive, employees. In practice, though, this otherwise 'healthy' system did not always work. While SSD personnel attempted to fulfil their charge by implementing a series of screening measures, production targets and a scarcely-populated regional labour pool regularly prompted senior officials to compel the SSD to clear recruits who were otherwise unfit for mine service. Drawing upon interviews with former SSD staff and African labourers, as well as company and colonial archival sources, this article focuses on the interplay over time between the SSD, the company's production demands and these labourers.

Productivity, part 1: getting things done, using e-mail, scanners, reference managers, note-taking applications, and text expanders.

PubMed

Lackey, Amanda E; Moshiri, Mariam; Pandey, Tarun; Lall, Chandana; Lalwani, Neeraj; Bhargava, Puneet

2014-05-01

In an era of declining reimbursements and tightening of the job market, today's radiologists are forced to "make do with less." With the rollout of the Patient Protection and Affordable Care Act, commonly called "Obamacare," radiologists will be expected not only to interpret studies but to also take on many additional roles, adding a new layer of complexity to already demanding daily duties. These changes make it more important than ever to develop a personal workflow management system incorporating some of the most potent productivity tools. In this article, the authors discuss current productivity techniques and related software with the most potential to help radiologists keep up with the ever increasing demands on their time at the work place and help us lead more balanced lives. Published by Elsevier Inc.

76 FR 61384 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

... Maintenance of the List of Products Requiring Federal Contractor Certification as to Forced or Indentured... DEPARTMENT OF LABOR Notice of Initial Determination Revising the List of Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to Executive Order 13126...

77 FR 59418 - Notice of Initial Determination Revising the List of Products Requiring Federal Contractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

... of products requiring federal contractor certification as to the use of forced or indentured child... DEPARTMENT OF LABOR Notice of Initial Determination Revising the List of Products Requiring Federal Contractor Certification as to Forced/Indentured Child Labor Pursuant to Executive Order 13126...

Work/Family Interactions: Trends and Applications.

ERIC Educational Resources Information Center

Engelbrecht, JoAnn D.; Nies, Joyce I.

1988-01-01

The authors discuss five trends and how family life educators can address them. The trends are (1) women's labor force participation, (2) growth of the service sector, (3) recognition that work and family life affect each other, (4) space sharing by work and family life, and (5) aging of the work force. (CH)

A Report of the Child Labor Task Force.

ERIC Educational Resources Information Center

Oregon State Bureau of Labor and Industry, Portland.

A task force studied youth work and its impact on the health, education, and safety of 16- and 17-year-olds. The study covered such issues as the following: effects of work on school performance, work's physical and psychological effects on young people, the effects work can have on young people's preparation for lifelong work, and what steps can…

Work-Family Spillover and Daily Reports of Work and Family Stress in the Adult Labor Force.

ERIC Educational Resources Information Center

Grzywacz, Joseph G.; Almeida, David M.; McDonald, Daniel A.

2002-01-01

Data from two affiliated national surveys were used to examine distribution of work-family spillover among working adults. Analyses testing family life course hypotheses indicated self-reported negative and positive spillover between work and family were not randomly distributed within the labor force. Age was found to have a persistent…

Sensing power transfer between the human body and the environment.

PubMed

Veltink, Peter H; Kortier, Henk; Schepers, H Martin

2009-06-01

The power transferred between the human body and the environment at any time and the work performed are important quantities to be estimated when evaluating and optimizing the physical interaction between the human body and the environment in sports, physical labor, and rehabilitation. It is the objective of the current paper to present a concept for estimating power transfer between the human body and the environment during free motions and using sensors at the interface, not requiring measurement systems in the environment, and to experimentally demonstrate this principle. Mass and spring loads were moved by hand over a fixed height difference via varying free movement trajectories. Kinematic and kinetic quantities were measured in the handle between the hand and the load. 3-D force and moments were measured using a 6 DOF force/moment sensor module, 3-D movement was measured using 3-D accelerometers and angular velocity sensors. The orientation was estimated from the angular velocity, using the initial orientation as a begin condition. The accelerometer signals were expressed in global coordinates using this orientation information. Velocity was estimated by integrating acceleration in global coordinates, obtained by adding gravitational acceleration to the accelerometer signals. Zero start and end velocities were used as begin and end conditions. Power was calculated as the sum of the inner products of velocity and force and of angular velocity and moment, and work was estimated by integrating power over time. The estimated performed work was compared to the potential energy difference corresponding to the change in height of the loads and appeared to be accurate within 4% for varying movements with net displacements and varying loads (mass and spring). The principle of estimating power transfer demonstrated in this paper can be used in future interfaces between the human body and the environment instrumented with body-mounted miniature 3-D force and acceleration sensors.

Results of telerobotic hand controller study using force information and rate control

NASA Technical Reports Server (NTRS)

Willshire, Kelli F.; Harrison, F. W.; Hogge, Edward F.; Williams, Robert L.; Soloway, Donald

1992-01-01

To increase quantified information about the effectiveness and subjective workload of force information relayed through manipulator input control devices, a space related task was performed by eight subjects with kinesthetic force feedback and/or local force accommodation through three different input control devices (i.e., hand controllers) operating in rate control mode. Task completion time, manipulator work, and subjective responses were measured. Results indicated a difference among the hand controllers. For the Honeywell six degree-of-freedom hand controller, the overall task completion times were shortest, the amount of work exerted was the least, and was the most preferred by test subjects. Neither force accommodation with or without reflection resulted in shorter task completion times or reduced work although those conditions were better than no force information for some aspects. Comparisons of results from previous studies are discussed.

Force decay of elastomeric chains - a mechanical design and product comparison study.

PubMed

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

Micromechanism linear actuator with capillary force sealing

DOEpatents

Sniegowski, Jeffry J.

1997-01-01

A class of micromachine linear actuators whose function is based on gas driven pistons in which capillary forces are used to seal the gas behind the piston. The capillary forces also increase the amount of force transmitted from the gas pressure to the piston. In a major subclass of such devices, the gas bubble is produced by thermal vaporization of a working fluid. Because of their dependence on capillary forces for sealing, such devices are only practical on the sub-mm size scale, but in that regime they produce very large force times distance (total work) values.

Hispanics in the Work Force, Part II: Hispanic Women.

ERIC Educational Resources Information Center

Escutia, Marta M.; Prieto, Margarita

This paper evaluates the status of Hispanic women in the United States work force. First, demographic information on age patterns, fertility rates, and educational attainment is reviewed. Then, labor market status is assessed in relation to Hispanic women's labor force participation, employment patterns, and poverty. Next, the Federal response to…

Entropy production and rectification efficiency in colloid transport along a pulsating channel

NASA Astrophysics Data System (ADS)

Florencia Carusela, M.; Rubi, J. Miguel

2018-06-01

We study the current rectification of particles moving in a pulsating channel under the influence of an applied force. We have shown the existence of different rectification scenarios in which entropic and energetic effects compete. The effect can be quantified by means of a rectification coefficient that is analyzed in terms of the force, the frequency and the diffusion coefficient. The energetic cost of the motion of the particles expressed in terms of the entropy production depends on the importance of the entropic contribution to the total force. Rectification is more important at low values of the applied force when entropic effects become dominant. In this regime, the entropy production is not invariant under reversal of the applied force. The phenomenon observed could be used to optimize transport in microfluidic devices or in biological channels.

Is rate-pressure product of any use in the isolated rat heart? Assessing cardiac 'effort' and oxygen consumption in the Langendorff-perfused heart.

PubMed

Aksentijević, Dunja; Lewis, Hannah R; Shattock, Michael J

2016-02-01

What is the central question of this study? Rate-pressure product (RPP) is commonly used as an index of cardiac 'effort'. In canine and human hearts (which have a positive force-frequency relationship), RPP is linearly correlated with oxygen consumption and has therefore been widely adopted as a species-independent index of cardiac work. However, given that isolated rodent hearts demonstrate a negative force-frequency relationship, its use in this model requires validation. What is the main finding and its importance? Despite its widespread use, RPP is not correlated with oxygen consumption (or cardiac 'effort') in the Langendorff-perfused isolated rat heart. This lack of correlation was also evident when perfusions included a range of metabolic substrates, insulin or β-adrenoceptor stimulation. Langendorff perfusion of hearts isolated from rats and mice has been used extensively for physiological, pharmacological and biochemical studies. The ability to phenotype these hearts reliably is, therefore, essential. One of the commonly used indices of function is rate-pressure product (RPP); a rather ill-defined index of 'work' or, more correctly, 'effort'. Rate-pressure product, as originally described in dog or human hearts, was shown to be correlated with myocardial oxygen consumption (MV̇O2). Despite its widespread use, the application of this index to rat or mouse hearts (which, unlike the dog or human, have a negative force-frequency relationship) has not been characterized. The aim of this study was to examine the relationship between RPP and MV̇O2 in Langendorff-perfused rat hearts. Paced hearts (300-750 beats min(-1)) were perfused either with Krebs-Henseleit (KH) buffer (11 mm glucose) or with buffer supplemented with metabolic substrates and insulin. The arteriovenous oxygen consumption (MV̇O2) was recorded. Metabolic status was assessed using (31) P magnetic resonance spectroscopy and lactate efflux. Experiments were repeated in the presence of isoprenaline and in unpaced hearts where heart rate was increased by cumulative isoprenaline challenge. In KH buffer-perfused hearts, MV̇O2 increased with increasing heart rate, but given that left ventricular developed pressure decreased with increases in rate, RPP was not correlated with MV̇O2, lactate production or phosphocreatine/ATP ratio. Although the provision of substrates or β-adrenoceptor stimulation changed the shape of the RPP-MV̇O2 relationship, neither intervention resulted in a positive correlation between RPP and oxygen consumption. Rate-pressure product is therefore an unreliable index of oxygen consumption or 'cardiac effort' in the isolated rat heart. © 2015 The Authors. Experimental Physiology published by John Wiley & Sons Ltd on behalf of The Physiological Society.

Hand digit control in children: motor overflow in multi-finger pressing force vector space during maximum voluntary force production.

PubMed

Shim, Jae Kun; Karol, Sohit; Hsu, Jeffrey; de Oliveira, Marcio Alves

2008-04-01

The aim of this study was to investigate the contralateral motor overflow in children during single-finger and multi-finger maximum force production tasks. Forty-five right handed children, 5-11 years of age produced maximum isometric pressing force in flexion or extension with single fingers or all four fingers of their right hand. The forces produced by individual fingers of the right and left hands were recorded and analyzed in four-dimensional finger force vector space. The results showed that increases in task (right) hand finger forces were linearly associated with non-task (left) hand finger forces. The ratio of the non-task hand finger force magnitude to the corresponding task hand finger force magnitude, termed motor overflow magnitude (MOM), was greater in extension than flexion. The index finger flexion task showed the smallest MOM values. The similarity between the directions of task hand and non-task hand finger force vectors in four-dimensional finger force vector space, termed motor overflow direction (MOD), was the greatest for index and smallest for little finger tasks. MOM of a four-finger task was greater than the sum of MOMs of single-finger tasks, and this phenomenon was termed motor overflow surplus. Contrary to previous studies, no single-finger or four-finger tasks showed significant changes of MOM or MOD with the age of children. We conclude that the contralateral motor overflow in children during finger maximum force production tasks is dependent upon the task fingers and the magnitude and direction of task finger forces.

Employee Involvement White Collar Work Force (Phase 1)

DTIC Science & Technology

1991-07-01

TITLE AND SUBTITLE Employee Involvement White Collar Work Force (Phase 1) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...N COMMITTEE August 1991 NSRP 0337 AL EFFECTS TRANSFER Employee Involvement White Collar Work Force (Phase 1) UNITED STATES NAVY David Taylor Research...report. AS used In the above, “Persons acting on behalf of the United States Navy” includes any employee , contractor, or subcontractor to the

Women Who Work, Part 2: Married Women in the Labour Force: The Influence of Age, Education, Child-Bearing Status and Residence. Special Labour Force Studies Series B, No. 2.

ERIC Educational Resources Information Center

Allingham, John D.; Spencer, Byron G.

To followup an earlier study of the relative importance of age, education, and marital status as variables influencing female participation in the labor force, this research attempts to measure the relative importance of similar factors in determining whether or not a woman works or wishes to work. Particular emphasis was given to such…

[Nitrous oxide production by the German Armed Forces in the 20th century : History of medicine and pharmacy in the Armed Forces].

PubMed

Kronabel, D B J

2010-03-01

The nitrous oxide production unit of the German Armed Forces was a worldwide unique facility which was only employed in the former main medical depot at Euskirchen (nitrous oxide: medical gas which is now obsolete). The last unit was phased out in 2002 and brought to the main medical depot at Blankenburg. Unfortunately the unit is now no longer in the depot and seems to have disappeared. This article describes the nitrous oxide production process and the use of the production unit which was designed by the Socsil company of Switzerland.

Labor-force participation of older married women.

PubMed

Henretta, J C; O'Rand, A M

1980-08-01

This article utilizes the 1969, 1971, and 1973 waves of the Longitudinal Retirement History Study (LRHS) to examine stopping work by working wives of respondents. Different patterns of labor-force participation reveal that younger wives of respondents were more likely to work than were older wives. Most wives did not reenter the labor force after leaving it. The determinants of stopping or continuing work in 1969-73 for those wives who worked in 1969 were also examined. Although the patterns were somewhat different for younger wives, two factors stand out: Coverage of the wife by a private pension plan and providing for children or elderly parents have substantial effects on the probability of continuing work.

A fundamental reconsideration of the CRASH3 damage analysis algorithm: the case against uniform ubiquitous linearity between BEV, peak collision force magnitude, and residual damage depth.

PubMed

Singh, Jai

2013-01-01

The objective of this study was a thorough reconsideration, within the framework of Newtonian mechanics and work-energy relationships, of the empirically interpreted relationships employed within the CRASH3 damage analysis algorithm in regards to linearity between barrier equivalent velocity (BEV) or peak collision force magnitude and residual damage depth. The CRASH3 damage analysis algorithm was considered, first in terms of the cases of collisions that produced no residual damage, in order to properly explain the damage onset speed and crush resistance terms. Under the modeling constraints of the collision partners representing a closed system and the a priori assumption of linearity between BEV or peak collision force magnitude and residual damage depth, the equations for the sole realistic model were derived. Evaluation of the work-energy relationships for collisions at or below the elastic limit revealed that the BEV or peak collision force magnitude relationships are bifurcated based upon the residual damage depth. Rather than being additive terms from the linear curve fits employed in the CRASH3 damage analysis algorithm, the Campbell b 0 and CRASH3 AL terms represent the maximum values that can be ascribed to the BEV or peak collision force magnitude, respectively, for collisions that produce zero residual damage. Collisions resulting in the production of non-zero residual damage depth already account for the surpassing of the elastic limit during closure and therefore the secondary addition of the elastic limit terms represents a double accounting of the same. This evaluation shows that the current energy absorbed formulation utilized in the CRASH3 damage analysis algorithm extraneously includes terms associated with the A and G stiffness coefficients. This sole realistic model, however, is limited, secondary to reducing the coefficient of restitution to a constant value for all cases in which the residual damage depth is nonzero. Linearity between BEV or peak collision force magnitude and residual damage depth may be applicable for particular ranges of residual damage depth for any given region of any given vehicle. Within the modeling construct employed by the CRASH3 damage algorithm, the case of uniform and ubiquitous linearity cannot be supported. Considerations regarding the inclusion of internal work recovered and restitution for modeling the separation phase change in velocity magnitude should account for not only the effects present during the evaluation of a vehicle-to-vehicle collision of interest but also to the approach taken for modeling the force-deflection response for each collision partner.

Women's Work Pathways Across the Life Course.

PubMed

Damaske, Sarah; Frech, Adrianne

2016-04-01

Despite numerous changes in women's employment in the latter half of the twentieth century, women's employment continues to be uneven and stalled. Drawing from data on women's weekly work hours in the National Longitudinal Survey of Youth (NLSY79), we identify significant inequality in women's labor force experiences across adulthood. We find two pathways of stable full-time work for women, three pathways of part-time employment, and a pathway of unpaid labor. A majority of women follow one of the two full-time work pathways, while fewer than 10% follow a pathway of unpaid labor. Our findings provide evidence of the lasting influence of work-family conflict and early socioeconomic advantages and disadvantages on women's work pathways. Indeed, race, poverty, educational attainment, and early family characteristics significantly shaped women's work careers. Work-family opportunities and constraints also were related to women's work hours, as were a woman's gendered beliefs and expectations. We conclude that women's employment pathways are a product of both their resources and changing social environment as well as individual agency. Significantly, we point to social stratification, gender ideologies, and work-family constraints, all working in concert, as key explanations for how women are "tracked" onto work pathways from an early age.

Influence of forces acting on side of machine on precision machining of large diameter holes

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Sanina, T. M.

2018-03-01

One of the most important factors that increase efficiency, durability and reliability of rotating units is precision installation, preventive maintenance work, timely replacing of a failed or worn components and assemblies. These works should be carried out in the operation of the equipment, as the downtime in many cases leads to large financial losses. Stop of one unit of an industrial enterprise can interrupt the technological chain of production, resulting in a possible stop of the entire equipment. Improving the efficiency and optimization of the repair process increases accuracy of installation work when installing equipment, conducting restoration under operating conditions relevant for enterprises of different industries because it eliminates dismantling the equipment, sending it to maintenance, the expectation of equipment return, the new installation with the required quality and accuracy of repair.

The contribution of organization theory to nursing health services research.

PubMed

Mick, Stephen S; Mark, Barbara A

2005-01-01

We review nursing and health services research on health care organizations over the period 1950 through 2004 to reveal the contribution of nursing to this field. Notwithstanding this rich tradition and the unique perspective of nursing researchers grounded in patient care production processes, the following gaps in nursing research remain: (1) the lack of theoretical frameworks about organizational factors relating to internal work processes; (2) the need for sophisticated methodologies to guide empirical investigations; (3) the difficulty in understanding how organizations adapt models for patient care delivery in response to market forces; (4) the paucity of attention to the impact of new technologies on the organization of patient care work processes. Given nurses' deep understanding of the inner workings of health care facilities, we hope to see an increasing number of research programs that tackle these deficiencies.

Maintaining knife sharpness in industrial meat cutting: A matter of knife or meat cutter ability.

PubMed

Karltun, J; Vogel, K; Bergstrand, M; Eklund, J

2016-09-01

Knife sharpness is imperative in meat cutting. The aim of this study was to compare the impact of knife blade steel quality with meat cutters' individual ability to maintain the cutting edge sharp in an industrial production setting. Twelve meat cutters in two different companies using three different knives during normal production were studied in this quasi-experimental study. Methods included were measuring knife cutting force before and after knife use, time knives were used, ratings of sharpness and discomfort and interviews. Results showed that the meat cutters' skill of maintaining sharpness during work had a much larger effect on knife sharpness during work than the knife steel differences. The ability was also related to feelings of discomfort and to physical exertion. It was found that meat cutters using more knives were more likely to suffer from discomfort in the upper limbs, which is a risk for developing MSD. Copyright © 2016 Elsevier Ltd. All rights reserved.

Inspiration in the harness of daily labor. Darwin, botany, and the triumph of evolution, 1859-1868.

PubMed

Bellon, Richard

2011-09-01

Charles Darwin hoped that a large body of working naturalists would embrace evolution after the Origin of Species appeared in late 1859. He was disappointed. His evolutionary ideas at first made painfully little progress in the scientific community. But by 1863 the tide had turned dramatically, and within five years evolution became scientific orthodoxy in Britain. The Origin's reception followed this peculiar trajectory because Darwin had not initially tied its theory to productive original scientific investigation, which left him vulnerable to charges of reckless speculation. The debate changed with his successful application of evolution to original problems, most notably orchid fertilization, the subject of a well-received book in 1862. Most of Darwin's colleagues found the argument of the Origin convincing when they realized that it functioned productively in the day-to-day work of science-and not before. The conceptual force of the Origin, however outwardly persuasive, acquired full scientific legitimacy only when placed "in the harness of daily labour".

The Labor Force Participation of Older Women: Retired? Working? Both?

ERIC Educational Resources Information Center

Hill, Elizabeth T.

2002-01-01

Noneconomic factors such as level of education, job flexibility in work hours, and physical stress appear to influence older women's labor force participation resulting in many retired women who are employed. Some women classified as retired work nearly as many hours as those employed, although many employed older women work part time. (Contains…

Aging Work Force Brings New Look at Teacher Retirement.

ERIC Educational Resources Information Center

Auriemma, Frank V.; And Others

1992-01-01

Higher salaries and improved working conditions have combined to make teaching a more attractive profession and to reduce teacher turnover rates. At the same time, however, the teaching work force has aged and faces problems in retirement programs. All levels of government should work with interested groups to find solutions to six major problems…

Electromyographic signal and force comparisons during maximal voluntary isometric contraction in water and on dry land.

PubMed

Pinto, Stephanie Santana; Liedtke, Giane Veiga; Alberton, Cristine Lima; da Silva, Eduardo Marczwski; Cadore, Eduardo Lusa; Kruel, Luiz Fernando Martins

2010-11-01

This study was designed to compare surface electromyographic (sEMG) signal and force production during maximal voluntary isometric contractions (MVCs) in water and on dry land. The reproducibility of sEMG and isometric force measurements between water and dry land environments was also assessed. Nine women performed MVC for elbow flexion and extension, hip flexion, and extension against identical fixed resistance in both environments. The sEMG signal from biceps brachii, triceps brachii, rectus femoris, and biceps femoris was recorded with waterproof adhesives placed over each electrode. The sEMG and force production showed no significant difference between water and dry land, except for HEX (p = 0.035). In addition, intraclass correlation coefficient values were significant and ranged from moderate to high (0.66-0.96) for sEMG and force production between environments. These results showed that the environment did not influence the sEMG and force in MVC.

Multi-finger synergies and the muscular apparatus of the hand.

PubMed

Cuadra, Cristian; Bartsch, Angelo; Tiemann, Paula; Reschechtko, Sasha; Latash, Mark L

2018-05-01

We explored whether the synergic control of the hand during multi-finger force production tasks depends on the hand muscles involved. Healthy subjects performed accurate force production tasks and targeted force pulses while pressing against loops positioned at the level of fingertips, middle phalanges, and proximal phalanges. This varied the involvement of the extrinsic and intrinsic finger flexors. The framework of the uncontrolled manifold (UCM) hypothesis was used to analyze the structure of inter-trial variance, motor equivalence, and anticipatory synergy adjustments prior to the force pulse in the spaces of finger forces and finger modes (hypothetical finger-specific control signals). Subjects showed larger maximal force magnitudes at the proximal site of force production. There were synergies stabilizing total force during steady-state phases across all three sites of force production; no differences were seen across the sites in indices of structure of variance, motor equivalence, or anticipatory synergy adjustments. Indices of variance, which did not affect the task (within the UCM), correlated with motor equivalent motion between the steady states prior to and after the force pulse; in contrast, variance affecting task performance did not correlate with non-motor equivalent motion. The observations are discussed within the framework of hierarchical control with referent coordinates for salient effectors at each level. The findings suggest that multi-finger synergies are defined at the level of abundant transformation between the low-dimensional hand level and higher dimensional finger level while being relatively immune to transformations between the finger level and muscle level. The results also support the scheme of control with two classes of neural variables that define referent coordinates and gains in back-coupling loops between hierarchical control levels.

Reduction of centrifugation force in discontinuous percoll gradients increases in vitro fertilization rates without reducing bovine sperm recovery.

PubMed

Guimarães, A C G; Leivas, F G; Santos, F W; Schwengber, E B; Giotto, A B; Machado, C I U; Gonçalves, C G M; Folchini, N P; Brum, D S

2014-05-01

The objective of this study was to determine the effect of different centrifugation forces in bovine sperm separation by discontinuous Percoll gradients for in vitro fertilization IVF. The semen samples from each bull were pooled or each bull were centrifuged separately and centrifuged in discontinuous Percoll gradients (30, 60 and 90%) at different forces: F1 (9000×g), F2 (6500×g), F3 (4500×g) and F4 (2200×g), according experiment. The sperm samples were evaluated to determine the concentration, motility, vigor, morphology, reactive oxygen species (ROS), integrity of the plasma membrane, lipid peroxidation, antioxidants and embryo development were also evaluated. No difference was observed in the concentration of sperm submitted to different centrifugation forces. The total percentage of motile sperm was increased after centrifugation at F3 and F4, and the ROS production at F1 was greater than the other forces. When the bulls semen were processed individually, no significant differences were observed for the sperm quality parameters between F1 and F4, including lipid peroxidation, antioxidants, cleavage rate and average time to the first cleavage. This work demonstrated for the first time that centrifugation at 2200×g enhanced the sperm penetration and fertilization rates without reducing sperm recovery compared to the typical centrifugation force (9000×g) currently used by the commercial bovine IVF industry. Copyright © 2014 Elsevier B.V. All rights reserved.

Bilateral movements increase sustained extensor force in the paretic arm.

PubMed

Kang, Nyeonju; Cauraugh, James H

2018-04-01

Muscle weakness in the extensors poststroke is a common motor impairment. Unfortunately, research is unclear on whether bilateral movements increase extensor force production in the paretic arm. This study investigated sustained force production while stroke individuals maximally extended their wrist and fingers on their paretic arm. Specifically, we determined isometric force production in three conditions: (a) unilateral paretic arm, (b) unilateral nonparetic arm, and (c) bilateral (both arms executing the same movement simultaneously). Seventeen chronic stroke patients produced isometric sustained force by executing wrist and fingers extension in unilateral and bilateral contraction conditions. Mean force, force variability (coefficient of variation), and signal-to-noise ratio were calculated for each contraction condition. Analysis of two-way (Arm × Type of Condition: 2 × 2; Paretic or Nonparetic Arm × Unilateral or Bilateral Conditions) within-subjects ANOVAs revealed that the bilateral condition increased sustained force in the paretic arm, but reduced sustained force in the nonparetic arm. Further, although the paretic arm exhibited more force variability and less signal-to-noise ratio than the nonparetic arm during a unilateral condition, there were no differences when participants simultaneously executed isometric contractions with both arms. Our unique findings indicate that bilateral contractions transiently increased extensor force in the paretic arm. Implications for Rehabilitation Bilateral movements increased isometric wrsit extensor force in paretic arms and redcued force in nonparetic arms versus unilateral movements. Both paretic and nonparetic arms produced similar force variability and signal-to-noise ratio during bilateral movements. Increased sustained force in the paretic arm during the bilateral condition indicates that rehabilitation protocols based on bilateral movements may be beneficial for functional recovery.

Youth Employment. Final Recommendations of the State Superintendent's Task Force.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This report contains the final recommendations of the task force on youth employment for the state of Wisconsin. The task force was specifically charged with studying issues related to working teenagers, reviewing existing laws and regulations on child labor, and developing recommendations to ensure that when teenagers work, their jobs do not…

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2010

2010-01-01

The labor force is the number of people aged 16 or older who are either working or looking for work. It does not include active-duty military personnel or institutionalized people, such as prison inmates. Quantifying this total supply of labor is a way of determining how big the economy can get. Labor force participation rates vary significantly…

Structural limits on force production and shortening of smooth muscle.

PubMed

Siegman, Marion J; Davidheiser, Sandra; Mooers, Susan U; Butler, Thomas M

2013-02-01

This study determined the factors that limit force production and shortening in two smooth muscles having very different relationships between active and passive force as a function of muscle length. The rat anococcygeus muscle develops active force over the range of lengths 0.2-2.0× the optimum length for force production (Lo). Passive tension due to extension of the resting muscle occurs only at lengths exceeding Lo. In contrast, the rabbit taenia coli develops force in the range of lengths 0.4-1.1 Lo, and passive force which is detectable at 0.56 Lo, increases to ~0.45 maximum active force at Lo, and increases sharply with further extension. The anococcygeus muscle can shorten to 0.2 Lo and the taenia coli to 0.4 Lo. Dynamic stiffness and energy usage at short muscle lengths suggest that the limit of shortening in the taenia coli, in contrast to the anococcygeus muscle, is not due to a failure of cross bridge interaction. Phosphorylation of the regulatory myosin light chains in intact muscles decreased to a small extent at short lengths compared to the decrease in force production. The differences in force production and the extent of shortening in the two muscles was maintained even when, following permeabilization, the myosin light chains were irreversibly phosphorylated with ATPγS, indicating that differences in activation played little, if any role. Ultrastructural studies on resting and activated muscles show that the taenia coli, which is rich in connective tissue (unlike the anococcygeus muscle) undergoes marked cellular twisting and contractile filament misalignment at short lengths with compression of the extracellular matrix. As a result, force is not transmitted in the longitudinal axis of the muscle, but is dissipated against an internal load provided by the compressed extracellular matrix. These observations on two very different normal smooth muscles reveal how differences in the relative contribution of active and passive structural elements determine their mechanical behavior, and how this is potentially modified by remodeling that occurs in disease and in response to changes in functional demand.

Effects of cross-bridge compliance on the force-velocity relationship and muscle power output

PubMed Central

Fenwick, Axel J.; Wood, Alexander M.

2017-01-01

Muscles produce force and power by utilizing chemical energy through ATP hydrolysis. During concentric contractions (shortening), muscles generate less force compared to isometric contractions, but consume greater amounts of energy as shortening velocity increases. Conversely, more force is generated and less energy is consumed during eccentric muscle contractions (lengthening). This relationship between force, energy use, and the velocity of contraction has important implications for understanding muscle efficiency, but the molecular mechanisms underlying this behavior remain poorly understood. Here we used spatially-explicit, multi-filament models of Ca2+-regulated force production within a half-sarcomere to simulate how force production, energy utilization, and the number of bound cross-bridges are affected by dynamic changes in sarcomere length. These computational simulations show that cross-bridge binding increased during slow-velocity concentric and eccentric contractions, compared to isometric contractions. Over the full ranges of velocities that we simulated, cross-bridge cycling and energy utilization (i.e. ATPase rates) increased during shortening, and decreased during lengthening. These findings are consistent with the Fenn effect, but arise from a complicated relationship between velocity-dependent cross-bridge recruitment and cross-bridge cycling kinetics. We also investigated how force production, power output, and energy utilization varied with cross-bridge and myofilament compliance, which is impossible to address under typical experimental conditions. These important simulations show that increasing cross-bridge compliance resulted in greater cross-bridge binding and ATPase activity, but less force was generated per cross-bridge and throughout the sarcomere. These data indicate that the efficiency of force production decreases in a velocity-dependent manner, and that this behavior is sensitive to cross-bridge compliance. In contrast, significant effects of myofilament compliance on force production were only observed during isometric contractions, suggesting that changes in myofilament compliance may not influence power output during non-isometric contractions as greatly as changes in cross-bridge compliance. These findings advance our understanding of how cross-bridge and myofilament properties underlie velocity-dependent changes in contractile efficiency during muscle movement. PMID:29284062

Effects of cross-bridge compliance on the force-velocity relationship and muscle power output.

PubMed

Fenwick, Axel J; Wood, Alexander M; Tanner, Bertrand C W

2017-01-01

Muscles produce force and power by utilizing chemical energy through ATP hydrolysis. During concentric contractions (shortening), muscles generate less force compared to isometric contractions, but consume greater amounts of energy as shortening velocity increases. Conversely, more force is generated and less energy is consumed during eccentric muscle contractions (lengthening). This relationship between force, energy use, and the velocity of contraction has important implications for understanding muscle efficiency, but the molecular mechanisms underlying this behavior remain poorly understood. Here we used spatially-explicit, multi-filament models of Ca2+-regulated force production within a half-sarcomere to simulate how force production, energy utilization, and the number of bound cross-bridges are affected by dynamic changes in sarcomere length. These computational simulations show that cross-bridge binding increased during slow-velocity concentric and eccentric contractions, compared to isometric contractions. Over the full ranges of velocities that we simulated, cross-bridge cycling and energy utilization (i.e. ATPase rates) increased during shortening, and decreased during lengthening. These findings are consistent with the Fenn effect, but arise from a complicated relationship between velocity-dependent cross-bridge recruitment and cross-bridge cycling kinetics. We also investigated how force production, power output, and energy utilization varied with cross-bridge and myofilament compliance, which is impossible to address under typical experimental conditions. These important simulations show that increasing cross-bridge compliance resulted in greater cross-bridge binding and ATPase activity, but less force was generated per cross-bridge and throughout the sarcomere. These data indicate that the efficiency of force production decreases in a velocity-dependent manner, and that this behavior is sensitive to cross-bridge compliance. In contrast, significant effects of myofilament compliance on force production were only observed during isometric contractions, suggesting that changes in myofilament compliance may not influence power output during non-isometric contractions as greatly as changes in cross-bridge compliance. These findings advance our understanding of how cross-bridge and myofilament properties underlie velocity-dependent changes in contractile efficiency during muscle movement.

The challenge of an aging work force: keeping older workers employed and employable.

PubMed

Rix, S E

1996-01-01

This article reviews labor-force trends and older-worker employment policies in Japan and the United States. Both countries have aging work forces, but Japan's labor force is and for some time has been older than that of the United States. Japan's Ministry of Labor began addressing older-worker issues over 30 years ago and in the ensuing years has promulgated numerous initiatives to extend working life. Mandatory retirement, however, remains both legal and common in Japan, yet labor-force participation rates are higher for older persons in that country than in the United States, where mandatory retirement is illegal. Japan's older-worker programs and policies clearly seem to have an impact on labor-force rates, although those rates are dropping among the elderly in Japan as well as in the United States. The transferability of these programs and policies to the United States is discussed.

A balanced ATP driving force module for enhancing photosynthetic biosynthesis of 3-hydroxybutyrate from CO2.

PubMed

Ku, Jason T; Lan, Ethan I

2018-03-01

Using engineered photoautotrophic microorganisms for the direct chemical synthesis from CO 2 is an attractive direction for both sustainability and CO 2 mitigation. However, the behaviors of non-native metabolic pathways may be difficult to control due to the different intracellular contexts between natural and heterologous hosts. While most metabolic engineering efforts focus on strengthening driving forces in pathway design to favor biochemical production in these organisms, excessive driving force may be detrimental to product biosynthesis due to imbalanced cellular intermediate distribution. In this study, an ATP-hydrolysis based driving force module was engineered into cyanobacterium Synechococcus elongatus PCC 7942 to produce 3-hydroxybutyrate (3HB), a valuable chemical feedstock for the synthesis of biodegradable plastics and antibiotics. However, while the ATP driving force module is effective for increasing product formation, uncontrolled accumulation of intermediate metabolites likely led to metabolic imbalance and thus to cell growth inhibition. Therefore, the ATP driving force module was reengineered by providing a reversible outlet for excessive carbon flux. Upon expression of this balanced ATP driving force module with 3HB biosynthesis, engineered strain produced 3HB with a cumulative titer of 1.2 g/L, a significant increase over the initial strain. This result highlighted the importance of pathway reversibility as an effective design strategy for balancing driving force and intermediate accumulation, thereby achieving a self-regulated control for increased net flux towards product biosynthesis. Copyright © 2018 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

United States Air Force Quality of Air Force Life Active Duty Air Force Personnel Survey: 1980 Quick Look Report

DTIC Science & Technology

1980-07-01

number) Quality of life Job satisfaction ABSTRACT (Continue on reverse tide If nece.’snry and Identify by block number) eport summarizes results of...following description! WORKS Doing work that is personally meaningful and important; pride in ay work) job satisfaction ) recognition for my efforts and...family (if married ) or from home end friends (if unmarried ). EXTREMELY UNDESIRABLE INDIFFERENT EXTREMELY DESIRABLE 68. A favorable attitude on the

Using Decision Structures for Policy Analysis in Software Product-line Evolution - A Case Study

NASA Astrophysics Data System (ADS)

Sarang, Nita; Sanglikar, Mukund A.

Project management decisions are the primary basis for project success (or failure). Mostly, such decisions are based on an intuitive understanding of the underlying software engineering and management process and have a likelihood of being misjudged. Our problem domain is product-line evolution. We model the dynamics of the process by incorporating feedback loops appropriate to two decision structures: staffing policy, and the forces of growth associated with long-term software evolution. The model is executable and supports project managers to assess the long-term effects of possible actions. Our work also corroborates results from earlier studies of E-type systems, in particular the FEAST project and the rules for software evolution, planning and management.

Coherent spectroscopic methods for monitoring pathogens, genetically modified products and nanostructured materials in colloidal solution

NASA Astrophysics Data System (ADS)

Moguilnaya, T.; Suminov, Y.; Botikov, A.; Ignatov, S.; Kononenko, A.; Agibalov, A.

2017-01-01

We developed the new automatic method that combines the method of forced luminescence and stimulated Brillouin scattering. This method is used for monitoring pathogens, genetically modified products and nanostructured materials in colloidal solution. We carried out the statistical spectral analysis of pathogens, genetically modified soy and nano-particles of silver in water from different regions in order to determine the statistical errors of the method. We studied spectral characteristics of these objects in water to perform the initial identification with 95% probability. These results were used for creation of the model of the device for monitor of pathogenic organisms and working model of the device to determine the genetically modified soy in meat.

Synergies in the space of control variables within the equilibrium-point hypothesis.

PubMed

Ambike, S; Mattos, D; Zatsiorsky, V M; Latash, M L

2016-02-19

We use an approach rooted in the recent theory of synergies to analyze possible co-variation between two hypothetical control variables involved in finger force production based on the equilibrium-point (EP) hypothesis. These control variables are the referent coordinate (R) and apparent stiffness (C) of the finger. We tested a hypothesis that inter-trial co-variation in the {R; C} space during repeated, accurate force production trials stabilizes the fingertip force. This was expected to correspond to a relatively low amount of inter-trial variability affecting force and a high amount of variability keeping the force unchanged. We used the "inverse piano" apparatus to apply small and smooth positional perturbations to fingers during force production tasks. Across trials, R and C showed strong co-variation with the data points lying close to a hyperbolic curve. Hyperbolic regressions accounted for over 99% of the variance in the {R; C} space. Another analysis was conducted by randomizing the original {R; C} data sets and creating surrogate data sets that were then used to compute predicted force values. The surrogate sets always showed much higher force variance compared to the actual data, thus reinforcing the conclusion that finger force control was organized in the {R; C} space, as predicted by the EP hypothesis, and involved co-variation in that space stabilizing total force. Copyright © 2015 IBRO. Published by Elsevier Ltd. All rights reserved.

Synergies in the space of control variables within the equilibrium-point hypothesis

PubMed Central

Ambike, Satyajit; Mattos, Daniela; Zatsiorsky, Vladimir M.; Latash, Mark L.

2015-01-01

We use an approach rooted in the recent theory of synergies to analyze possible co-variation between two hypothetical control variables involved in finger force production based in the equilibrium-point hypothesis. These control variables are the referent coordinate (R) and apparent stiffness (C) of the finger. We tested a hypothesis that inter-trial co-variation in the {R; C} space during repeated, accurate force production trials stabilizes the fingertip force. This was expected to correspond to a relatively low amount of inter-trial variability affecting force and a high amount of variability keeping the force unchanged. We used the “inverse piano” apparatus to apply small and smooth positional perturbations to fingers during force production tasks. Across trials, R and C showed strong co-variation with the data points lying close to a hyperbolic curve. Hyperbolic regressions accounted for over 99% of the variance in the {R; C} space. Another analysis was conducted by randomizing the original {R; C} data sets and creating surrogate data sets that were then used to compute predicted force values. The surrogate sets always showed much higher force variance compared to the actual data, thus reinforcing the conclusion that finger force control was organized in the {R; C} space, as predicted by the equilibrium-point hypothesis, and involved co-variation in that space stabilizing total force. PMID:26701299

Part-time careers in academic internal medicine: a report from the association of specialty professors part-time careers task force on behalf of the alliance for academic internal medicine.

PubMed

Linzer, Mark; Warde, Carole; Alexander, R Wayne; Demarco, Deborah M; Haupt, Allison; Hicks, Leroi; Kutner, Jean; Mangione, Carol M; Mechaber, Hilit; Rentz, Meridith; Riley, Joanne; Schuster, Barbara; Solomon, Glen D; Volberding, Paul; Ibrahim, Tod

2009-10-01

To establish guidelines for more effectively incorporating part-time faculty into departments of internal medicine, a task force was convened in early 2007 by the Association of Specialty Professors. The task force used informal surveys, current literature, and consensus building among members of the Alliance for Academic Internal Medicine to produce a consensus statement and a series of recommendations. The task force agreed that part-time faculty could enrich a department of medicine, enhance workforce flexibility, and provide high-quality research, patient care, and education in a cost-effective manner. The task force provided a series of detailed steps for operationalizing part-time practice; to do so, key issues were addressed, such as fixed costs, malpractice insurance, space, cross-coverage, mentoring, career development, productivity targets, and flexible scheduling. Recommendations included (1) increasing respect for work-family balance, (2) allowing flexible time as well as part-time employment, (3) directly addressing negative perceptions about part-time faculty, (4) developing policies to allow flexibility in academic advancement, (5) considering part-time faculty as candidates for leadership positions, (6) encouraging granting agencies, including the National Institutes of Health and Veterans Administration, to consider part-time faculty as eligible for research career development awards, and (7) supporting future research in "best practices" for incorporating part-time faculty into academic departments of medicine.

The Global Burden of Potential Productivity Loss from Uncorrected Presbyopia.

PubMed

Frick, Kevin D; Joy, Susan M; Wilson, David A; Naidoo, Kovin S; Holden, Brien A

2015-08-01

The onset of presbyopia in middle adulthood results in potential losses in productivity among otherwise healthy adults if uncorrected or undercorrected. The economic burden could be significant in lower-income countries, where up to 94% of cases may be uncorrected or undercorrected. This study estimates the global burden of potential productivity lost because of uncorrected functional presbyopia. Population data from the US Census Bureau were combined with the estimated presbyopia prevalence, age of onset, employment rate, gross domestic product (GDP) per capita in current US dollars, and near vision impairment disability weights from the Global Burden of Disease 2010 study to estimate the global loss of productivity from uncorrected and undercorrected presbyopia in each country in 2011. To allow comparison with earlier work, we also calculated the loss with the conservative assumption that the contribution to productivity extends only up to 50 years of age. The economic modeling did not require the use of subjects. We estimated the number of cases of uncorrected or undercorrected presbyopia in each country among the working-age population. The number of working-age cases was multiplied by the labor force participation rate, the employment rate, a disability weight, and the GDP per capita to estimate the potential loss of GDP due to presbyopia. The outcome being measured is the lost productivity in 2011 US dollars resulting from uncorrected or undercorrected presbyopia. There were an estimated 1.272 billion cases of presbyopia worldwide in 2011. A total of 244 million cases, uncorrected or undercorrected among people aged <50 years, were associated with a potential productivity loss of US $11.023 billion (0.016% of global GDP). If all those people aged <65 years are assumed to be productive, the potential productivity loss would be US $25.367 billion or 0.037% of global GDP. Correcting presbyopia to the level achieved in Europe would reduce the burden to US $1.390 billion (0.002% of global GDP). Even with conservative assumptions regarding the productive population, presbyopia is a significant burden on productivity, and correction would have a significant impact on productivity in lower-income countries.

Serotonin Affects Movement Gain Control in the Spinal Cord

PubMed Central

Glaser, Joshua I.; Deng, Linna; Thompson, Christopher K.; Stevenson, Ian H.; Wang, Qining; Hornby, Thomas George; Heckman, Charles J.; Kording, Konrad P.

2014-01-01

A fundamental challenge for the nervous system is to encode signals spanning many orders of magnitude with neurons of limited bandwidth. To meet this challenge, perceptual systems use gain control. However, whether the motor system uses an analogous mechanism is essentially unknown. Neuromodulators, such as serotonin, are prime candidates for gain control signals during force production. Serotonergic neurons project diffusely to motor pools, and, therefore, force production by one muscle should change the gain of others. Here we present behavioral and pharmaceutical evidence that serotonin modulates the input–output gain of motoneurons in humans. By selectively changing the efficacy of serotonin with drugs, we systematically modulated the amplitude of spinal reflexes. More importantly, force production in different limbs interacts systematically, as predicted by a spinal gain control mechanism. Psychophysics and pharmacology suggest that the motor system adopts gain control mechanisms, and serotonin is a primary driver for their implementation in force production. PMID:25232107

Namibia [South-West Africa].

PubMed

1983-01-01

Namibia, a country of 1,051,700 inhabitants of whom 85.6% are blacks of diverse ethnic and linguistic origins, 7.5% are white, and the rest are of mixed ancestry, has been illegally administered by South Africa since 1966, when a League of Nations mandate was revoked by the UN. The Namibian Desert was a barrier to European expansion until the late 18th century, when the area came under German and British influence. Efforts to bring about an orderly and peaceful transition to independent status are hampered at present by the lack of parallel progress toward withdrawal of Cuban combat forces from Angola. Beginning in 1980, considerable executive power was transferred from the administrator general appointed by the South African Government to an interim 3-tier system of elected representatives dividing responsibility between central, ethnic, and local authorities. The judicial structure has separate overlapping systems for whites, westernized blacks and coloreds and for indigenous blacks. Namibian society is highly politicized, with 4 white and about 40 nonwhite political groups. The South West Africa People's Organization (SWAPO) remains an active party inside Namibia despite simultaneous detention of its entire leadership in 1979 by the South African Government. Namibia's economy is dual, with a modern market sector of mining, ranching and fishing producing most of the wealth and a traditional subsistence sector supporting most of the labor force. About 60% of the work force of 500,000 in 1981 worked in agriculture, 19% in industry and commerce, 6% in mining, 8% in services, and 7% in government. Namibia's gross domestic product in 1980 was $1.712 billion, representing an average growth rate of 2.5% from 1970-80. However, real growth since 1978 has been negative because of persistent drought, political uncertainty, low demand for mineral products, and previous overfishing. Namibia has no separate representation in any international body. The country may have the most highly developed infrastructure in Africa in relation to its population size. The population is growing at an annual rate of 2.7%.

Modeling the Space-Time Destiny of Pan-Arctic Permafrost DOC in a Global Land Surface Model: Feedback Implications

NASA Astrophysics Data System (ADS)

Bowring, S.; Lauerwald, R.; Guenet, B.; Zhu, D.; Ciais, P.

2017-12-01

Most global climate models do not represent the unique permafrost soil environment and its respective processes. This significantly contributes to uncertainty in estimating their responses, and that of the planet at large, to warming. Here, the production, transport and atmospheric release of dissolved organic carbon (DOC) from high-latitude permafrost soils into inland waters and the ocean is explicitly represented for the first time in the land surface component (ORCHIDEE-MICT) of a CMIP6 global climate model (IPSL). This work merges two models that are able to mechanistically simulate complex processes for 1) snow, ice and soil phenomena in high latitude environments, and 2) DOC production and lateral transport through soils and the river network, respectively, at 0.5° to 2° resolution. The resulting model is subjected to a wide range of input forcing data, parameter testing and contentious feedback phenomena, including microbial heat generation as the active layer deepens. We present results for the present and future Pan-Arctic and Eurasia, with a focus on the Lena and Mackenzie River basins, and show that soil DOC concentrations, their riverine transport and atmospheric evasion are reasonably well represented as compared to observed stocks, fluxes and seasonality. We show that most basins exhibit large increases in DOC transport and riverine CO2 evasion across the suite of RCP scenarios to 2100. We also show that model output is strongly influenced by choice of input forcing data. The riverine component of what is known as the `boundless carbon cycle' is little-recognized in global climate modeling. Hydrological mobilization to the river network results either in sedimentary settling or atmospheric `evasion', presently amounting to 0.5-1.8 PgC yr-1. Our work aims at filling in these knowledge gaps, and the response of these DOC-related processes to thermal forcing. Potential feedbacks owing to such a response are of particular relevance, given the magnitude of the permafrost carbon pool.

Women and Work.

ERIC Educational Resources Information Center

Butler, Margaret; Swanson, Linda

1985-01-01

Examines changes in female labor force participation since 1950. Finds little difference currently between metro and nonmetro areas in propensity of women to work outside the home. Traces racial and age differences in labor force participation. Finds family situation and changing social expectations responsible for increase in working women. (LFL)

48 CFR 970.2270 - Unemployment compensation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the negotiation and administration of cost-reimbursement type contracts, that economical and practical... work force stability and the general outlook with respect to future work force stability; (v) In a...

Random myosin loss along thick-filaments increases myosin attachment time and the proportion of bound myosin heads to mitigate force decline in skeletal muscle

PubMed Central

Tanner, Bertrand C.W.; McNabb, Mark; Palmer, Bradley M.; Toth, Michael J.; Miller, Mark S.

2014-01-01

Diminished skeletal muscle performance with aging, disuse, and disease may be partially attributed to the loss of myofilament proteins. Several laboratories have found a disproportionate loss of myosin protein content relative to other myofilament proteins, but due to methodological limitations, the structural manifestation of this protein loss is unknown. To investigate how variations in myosin content affect ensemble cross-bridge behavior and force production we simulated muscle contraction in the half-sarcomere as myosin was removed either i) uniformly, from the Z-line end of thick-filaments, or ii) randomly, along the length of thick-filaments. Uniform myosin removal decreased force production, showing a slightly steeper force-to-myosin content relationship than the 1:1 relationship that would be expected from the loss of cross-bridges. Random myosin removal also decreased force production, but this decrease was less than observed with uniform myosin loss, largely due to increased myosin attachment time (ton) and fractional cross-bridge binding with random myosin loss. These findings support our prior observations that prolonged ton may augment force production in single fibers with randomly reduced myosin content from chronic heart failure patients. These simulation also illustrate that the pattern of myosin loss along thick-filaments influences ensemble cross-bridge behavior and maintenance of force throughout the sarcomere. PMID:24486373

Reliability of system for precise cold forging

NASA Astrophysics Data System (ADS)

Krušič, Vid; Rodič, Tomaž

2017-07-01

The influence of scatter of principal input parameters of the forging system on the dimensional accuracy of product and on the tool life for closed-die forging process is presented in this paper. Scatter of the essential input parameters for the closed-die upsetting process was adjusted to the maximal values that enabled the reliable production of a dimensionally accurate product at optimal tool life. An operating window was created in which exists the maximal scatter of principal input parameters for the closed-die upsetting process that still ensures the desired dimensional accuracy of the product and the optimal tool life. Application of the adjustment of the process input parameters is shown on the example of making an inner race of homokinetic joint from mass production. High productivity in manufacture of elements by cold massive extrusion is often achieved by multiple forming operations that are performed simultaneously on the same press. By redesigning the time sequences of forming operations at multistage forming process of starter barrel during the working stroke the course of the resultant force is optimized.

Application of vibratory-percussion crusher for disintegration of supertough materials

NASA Astrophysics Data System (ADS)

Shishkin, E. V.; Kazakov, S. V.

2017-10-01

This article describes the results of theoretical and experimental studies of a vibratory-percussion crusher, which is driven from a pair of self-synchronizing vibration exciters, attached to the shell symmetrically about its vertical axis. In addition to that, crusher’s dynamic model is symmetrical and balanced. Forced oscillation laws for crusher working members and their amplitude-frequency characteristics have been inducted. Domains of existence of synchronous opposite-phase oscillations of crusher working members (crusher’s operating mode) and crusher capabilities have been identified. The results of mechanical and technological tests of a pilot crusher presented in the article show that this crusher may be viewed as an advanced machine for disintegration of supertough materials with minimum regrinding of finished products.

Burma.

PubMed

1986-05-01

Burma's population stood at 36,392,000 in 1985, with an annual growth rate of 2%. The infant mortality rate was 96/1000 live births and life expectancy was 57 years. The literacy rate was 66%. Of the work force of 14.8 million, 66% are engaged in agriculture, 12% work in industry, 10% are in trade, and 11% are employed by the government. The government is a socialist republic. Burma's gross domestic product was US$6.5 billion in 1984-85, with an annual growth rate of 1-4% and a per capita income of $179. The government aims to establish a centrally controlled economy, although private enterprises have been allowed to operate in the agricultural sector. Economic progress has been hindered by widespread political insurgency and weak markets for export commodities.

Miniature reciprocating heat pumps and engines

NASA Technical Reports Server (NTRS)

Thiesen, Jack H. (Inventor); Mohling, Robert A. (Inventor); Willen, Gary S. (Inventor)

2003-01-01

The present invention discloses a miniature thermodynamic device that can be constructed using standard micro-fabrication techniques. The device can be used to provide cooling, generate power, compress gases, pump fluids and reduce pressure below ambient (operate as a vacuum pump). Embodiments of the invention relating to the production of a cooling effect and the generation of electrical power, change the thermodynamic state of the system by extracting energy from a pressurized fluid. Energy extraction is attained using an expansion process, which is as nearly isentropic as possible for the appropriately chosen fluid. An isentropic expansion occurs when a compressed gas does work to expand, and in the disclosed embodiments, the gas does work by overcoming either an electrostatic or a magnetic force.

Distributed collaborative environments for virtual capability-based planning

NASA Astrophysics Data System (ADS)

McQuay, William K.

2003-09-01

Distributed collaboration is an emerging technology that will significantly change how decisions are made in the 21st century. Collaboration involves two or more geographically dispersed individuals working together to share and exchange data, information, knowledge, and actions. The marriage of information, collaboration, and simulation technologies provides the decision maker with a collaborative virtual environment for planning and decision support. This paper reviews research that is focusing on the applying open standards agent-based framework with integrated modeling and simulation to a new Air Force initiative in capability-based planning and the ability to implement it in a distributed virtual environment. Virtual Capability Planning effort will provide decision-quality knowledge for Air Force resource allocation and investment planning including examining proposed capabilities and cost of alternative approaches, the impact of technologies, identification of primary risk drivers, and creation of executable acquisition strategies. The transformed Air Force business processes are enabled by iterative use of constructive and virtual modeling, simulation, and analysis together with information technology. These tools are applied collaboratively via a technical framework by all the affected stakeholders - warfighter, laboratory, product center, logistics center, test center, and primary contractor.

Effects of anisotropic thermal conduction on wind properties in hot accretion flow

NASA Astrophysics Data System (ADS)

Bu, De-Fu; Wu, Mao-Chun; Yuan, Ye-Fei

2016-06-01

Previous works have clearly shown the existence of winds from black hole hot accretion flow and investigated their detailed properties. In extremely low accretion rate systems, the collisional mean-free path of electrons is large compared with the length-scale of the system, thus thermal conduction is dynamically important. When the magnetic field is present, the thermal conduction is anisotropic and energy transport is along magnetic field lines. In this paper, we study the effects of anisotropic thermal conduction on the wind production in hot accretion flows by performing two-dimensional magnetohydrodynamic simulations. We find that thermal conduction has only moderate effects on the mass flux of wind. But the energy flux of wind can be increased by a factor of ˜10 due to the increase of wind velocity when thermal conduction is included. The increase of wind velocity is because of the increase of driving forces (e.g. gas pressure gradient force and centrifugal force) when thermal conduction is included. This result demonstrates that thermal conduction plays an important role in determining the properties of wind.

Motor-Evoked Pain Increases Force Variability in Chronic Jaw Pain.

PubMed

Wang, Wei-En; Roy, Arnab; Misra, Gaurav; Archer, Derek B; Ribeiro-Dasilva, Margarete C; Fillingim, Roger B; Coombes, Stephen A

2018-06-01

Musculoskeletal pain changes how people move. Although experimental pain is associated with increases in the variability of motor output, it is not clear whether motor-evoked pain in clinical conditions is also associated with increases in variability. In the current study, we measured jaw force production during a visually guided force paradigm in which individuals with chronic jaw pain and control subjects produced force at 2% of their maximum voluntary contraction (low target force level) and at 15% of their maximum voluntary contraction (high target force level). State measures of pain were collected before and after each trial. Trait measures of pain intensity and pain interference, self-report measures of jaw function, and measures of depression, anxiety, and fatigue were also collected. We showed that the chronic jaw pain group exhibited greater force variability compared with controls irrespective of the force level, whereas the accuracy of force production did not differ between groups. Furthermore, predictors of force variability shifted from trait measures of pain intensity and pain interference at the low force level to state measures of pain intensity at the high force level. Our observations show that motor-evoked jaw pain is associated with increases in force variability that are predicted by a combination of trait measures and state measures of pain intensity and pain interference. Chronic jaw pain is characterized by increases in variability during force production, which can be predicted by pain intensity and pain interference. This report could help clinicians better understand the long-term consequences of chronic jaw pain on the motor system. Copyright © 2018 The American Pain Society. Published by Elsevier Inc. All rights reserved.

Interior view to the south of computer work stations in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view to the south of computer work stations in front of elevated work area 1570 on left and elevated glassed in work area 1870 on right - Over-the-Horizon Backscatter Radar Network, Mountain Home Air Force Operations Building, On Desert Street at 9th Avenue Mountain Home Air Force Base, Mountain Home, Elmore County, ID

U.S. Department of Energy, Illness and Injury Surveillance Program, Worker Health Summary, 1995-2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

The Department of Energy’s (DOE) Illness and Injury Surveillance Program has created an opportunity to assess illness and injury rates and patterns among workers at participating sites for well over a decade. The Worker Health Summary introduces an additional perspective on worker health with the introduction of analyses comparing the experience of sites in different program offices and a focus on time trends covering a decade of worker illness and injury experience. These analyses by program office suggest that illness and injury patterns among National Nuclear Security Administration (NNSA) workers diverge in many ways from those seen among Environmental Managementmore » (EM) and Science workers for reasons not yet understood. These differences will receive further investigation in future special focus studies, as will other findings of interest. With the time depth now available in our data, the Worker Health Summary reveals an additional nuance in worker health trends: changing health patterns in a specialized and skilled but aging work force. Older workers are becoming an increasing percentage of the work force, and their absence rates for diseases such as diabetes and hypertension are increasing as well. The impact of these emerging health issues, if properly addressed, can be managed to maintain or even enhance worker health and productivity. Prevention strategies designed to reduce the toll of these health conditions appear warranted, and this report gives us an indication of where to focus them. The analyses that follow reflect the Illness and Injury Surveillance Program’s continued commitment to apply a public health perspective in protecting the health of DOE’s work force.« less

Teleoperator comfort and psychometric stability: Criteria for limiting master-controller forces of operation and feedback during telemanipulation

NASA Technical Reports Server (NTRS)

Wiker, Steven F.; Hershkowitz, Elaine; Zik, John

1989-01-01

The following question is addressed: How much force should operators exert, or experience, when operating a telemanipulator master-controller for sustained periods without encountering significant fatigue and discomfort, and without loss of stability in psychometric perception of force. The need to minimize exertion demands to avoid fatigue is diametrically opposed by the need to present a wide range of force stimuli to enhance perception of applied or reflected forces. For 104 minutes subjects repetitiously performed a series of 15 s isometric pinch grasps; controlled at 5, 15, and 25 percent of their maximum voluntary strength. Cyclic pinch grasps were separated by rest intervals of 7.5 and 15 s. Upon completion of every 10 minute period, subjects interrupted grasping activities to gage the intensity of fatigue and discomfort in the hand and forearm using a cross-modal matching technique. A series of psychometric tests were then conducted to determine accuracy and stability in the subject's perception of force experienced. Results showed that onset of sensations of discomfort and fatigue were dependent upon the magnitude of grasp force, work/rest ratio, and progression of task. Declines in force magnitude estimation slopes, indicating a reduction in force perception sensitivity, occurred with increased grasp force when work/rest ratios were greater than 1.0. Specific recommendations for avoiding discomfort and shifts in force perception, by limiting pinch grasp force required for master-controller operation and range of force reflection or work/rest ratios, are provided.

RACE pulls for shared control

NASA Astrophysics Data System (ADS)

Leahy, M. B., Jr.; Cassiday, B. K.

1993-02-01

Maintaining and supporting an aircraft fleet, in a climate of reduced manpower and financial resources, dictates effective utilization of robotics and automation technologies. To help develop a winning robotics and automation program the Air Force Logistics Command created the Robotics and Automation Center of Excellence (RACE). RACE is a command wide focal point. Race is an organic source of expertise to assist the Air Logistic Center (ALC) product directorates in improving process productivity through the judicious insertion of robotics and automation technologies. RACE is a champion for pulling emerging technologies into the aircraft logistic centers. One of those technology pulls is shared control. Small batch sizes, feature uncertainty, and varying work load conspire to make classic industrial robotic solutions impractical. One can view ALC process problems in the context of space robotics without the time delay. The ALC's will benefit greatly from the implementation of a common architecture that supports a range of control actions from fully autonomous to teleoperated. Working with national laboratories and private industry, we hope to transition shared control technology to the depot floor. This paper provides an overview of the RACE internal initiatives and customer support, with particular emphasis on production processes that will benefit from shared control technology.

RACE pulls for shared control

NASA Astrophysics Data System (ADS)

Leahy, Michael B., Jr.; Cassiday, Brian K.

1992-11-01

Maintaining and supporting an aircraft fleet, in a climate of reduced manpower and financial resources, dictates effective utilization of robotics and automation technologies. To help develop a winning robotics and automation program the Air Force Logistics Command created the Robotics and Automation Center of Excellence (RACE). RACE is a command wide focal point. An organic source of expertise to assist the Air Logistic Center (ALC) product directorates in improving process productivity through the judicious insertion of robotics and automation technologies. RACE is a champion for pulling emerging technologies into the aircraft logistic centers. One of those technology pulls is shared control. The small batch sizes, feature uncertainty, and varying work load conspire to make classic industrial robotic solutions impractical. One can view ALC process problems in the context of space robotics without the time delay. The ALCs will benefit greatly from the implementation of a common architecture that supports a range of control actions from fully autonomous to teleoperated. Working with national laboratories and private industry we hope to transition shared control technology to the depot floor. This paper provides an overview of the RACE internal initiatives and customer support, with particular emphasis on production processes that will benefit from shared control technology.

RACE pulls for shared control

NASA Technical Reports Server (NTRS)

Leahy, M. B., Jr.; Cassiday, B. K.

1993-01-01

Maintaining and supporting an aircraft fleet, in a climate of reduced manpower and financial resources, dictates effective utilization of robotics and automation technologies. To help develop a winning robotics and automation program the Air Force Logistics Command created the Robotics and Automation Center of Excellence (RACE). RACE is a command wide focal point. Race is an organic source of expertise to assist the Air Logistic Center (ALC) product directorates in improving process productivity through the judicious insertion of robotics and automation technologies. RACE is a champion for pulling emerging technologies into the aircraft logistic centers. One of those technology pulls is shared control. Small batch sizes, feature uncertainty, and varying work load conspire to make classic industrial robotic solutions impractical. One can view ALC process problems in the context of space robotics without the time delay. The ALC's will benefit greatly from the implementation of a common architecture that supports a range of control actions from fully autonomous to teleoperated. Working with national laboratories and private industry, we hope to transition shared control technology to the depot floor. This paper provides an overview of the RACE internal initiatives and customer support, with particular emphasis on production processes that will benefit from shared control technology.

Texture and color features for tile classification

NASA Astrophysics Data System (ADS)

Baldrich, Ramon; Vanrell, Maria; Villanueva, Juan J.

1999-09-01

In this paper we present the results of a preliminary computer vision system to classify the production of a ceramic tile industry. We focus on the classification of a specific type of tiles whose production can be affected by external factors, such as humidity, temperature, origin of clays and pigments. Variations on these uncontrolled factors provoke small differences in the color and the texture of the tiles that force to classify all the production. A constant and non- subjective classification would allow avoiding devolution from customers and unnecessary stock fragmentation. The aim of this work is to simulate the human behavior on this classification task by extracting a set of features from tile images. These features are induced by definitions from experts. To compute them we need to mix color and texture information and to define global and local measures. In this work, we do not seek a general texture-color representation, we only deal with textures formed by non-oriented colored-blobs randomly distributed. New samples are classified using Discriminant Analysis functions derived from known class tile samples. The last part of the paper is devoted to explain the correction of acquired images in order to avoid time and geometry illumination changes.

Western Aeronautical Test Range

NASA Technical Reports Server (NTRS)

Sakahara, Robert D.

2008-01-01

This viewgraph presentation reviews the work of the Western Aeronautical Test Range (WATR). NASA's Western Aeronautical Test Range is a network of facilities used to support aeronautical research, science missions, exploration system concepts, and space operations. The WATR resides at NASA's Dryden Flight Research Center located at Edwards Air Force Base, California. The WATR is a part of NASA's Corporate Management of Aeronautical Facilities and funded by the Strategic Capability Asset Program (SCAP). Maps show the general location of the WATR area that is used for aeronautical testing and evaluation. The products, services and facilities of WATR are discussed,

Essays on Macroeconomics and Oil

NASA Astrophysics Data System (ADS)

Cakir, Nida

In these essays, I examine (i) the empirical methods that are widely used in the literature to measure total factor productivity growth and (ii) the impact of nationalization on productivity in the oil industry. The first chapter, which is an ongoing work with SHI, Wei, investigates two empirical measures, quantity-based (primal) measure and price-based (dual) measure, of total factor productivity growth. My co-author and I analyze how these two measures are affected by output market imperfection or variable capacity utilization. We find that under constant-returns-to-scale production function assumption, existence of the imperfect competition in the output market creates a gap between the measured TFP growth and the true TFP growth, no matter which method is used. However, theoretically, it does not affect the equivalence between the two measures. Under variable capacity utilization, we show that constant-returns-to-scale assumption is almost enough to guarantee the validity of the two methods in correctly capturing the true TFP growth. In the second and third chapters, I analyze the link between nationalization and productivity. The second chapter documents the trends in expropriation acts, and evaluates the impact of expropriations on labor productivity of resource-rich developing countries in the oil industry. In the first part of this chapter, I investigate the trends in the expropriation acts that took place in 102 developing countries during the period 1922-2006. I find that more than half of the acts occurred between 1970 and 1976, there has been an increase in the number of expropriations in recent years, and the extractive sector including petroleum is more likely to be expropriated. Motivated by these facts, in the second part, I examine the oil industry in a period of widespread expropriations, the 1970s. In a sample of major oil-producing countries including OPEC and non-OPEC members, I show that losses in relative labor productivity after nationalization range from 25 percent to 55 percent. In the third chapter, I attempt to provide an answer for why nationalization is associated with lower productivity by examining the case of the 1975 Venezuelan oil industry nationalization. The first part of the chapter documents the facts. I find that prior to nationalization there was a significant contraction in manpower (particularly in the foreign work force) and exploration, and an increase in production and productivity. Production and productivity declined sharply, however, by the beginning of the nationalization process. This decline continued even after the process was finalized and a substantial expansion took place in the industry. In the second part, I explain these facts by using a dynamic partial equilibrium framework for nonrenewable resources featured by imperfect substitutability between domestic and foreign workers. The anticipation of nationalization preceding 1970 can explain the drop in the total work force at the expense of lower exploration which accompanies increasing productivity. The lost foreign expertise can explain the path of productivity during and after nationalization. A comparison of the simulated and actual time series shows that around 56 percent of the increase in productivity prior to 1970, and about 39 percent of the decline in productivity during and after the nationalization process can be attributed to the proposed mechanism.

Lifelong Learning NCES Task Force: Final Report, Volume I. Working Paper Series.

ERIC Educational Resources Information Center

Binkley, Marilyn; Hudson, Lisa; Knepper, Paula; Kolstad, Andy; Stowe, Peter; Wirt, John

In September 1998, the National Center for Education Statistics (NCES) established a 1-year task force to review the NCES's role concerning lifelong learning. The eight-member task force established a working definition of lifelong learning ("a process or system through which individuals are able and willing to learn at all stages of life,…

Extrinsic Motivation as Correlates of Work Attitude of the Nigerian Police Force: Implications for Counselling

ERIC Educational Resources Information Center

Igun, Sylvester Nosakhare

2008-01-01

The study examined Extrinsic motivation as correlates of work attitude of the Nigeria Police Force and its implications for counselling. 300 Police personnel were selected by random sampling technique from six departments that make up police force Headquarters, Abuja. The personnel were selected from each department using simple sampling…

Exploring Work and Development Options to Reduce Early Labour Force Exit of Mature Aged Australians

ERIC Educational Resources Information Center

Pillay, Hitendra; Kelly, Kathy; Tones, Megan

2008-01-01

Early labour force exit is a significant challenge associated with the ageing workforce in Australia and many other developed countries. A reduction and increased flexibility of work hours has been suggested to improve labour force participation of the mature aged cohort. However, little is known about mature aged workers' aspirations for…

The Productivity Burden of Diabetes at a Population Level.

PubMed

Magliano, Dianna J; Martin, Valencia J; Owen, Alice J; Zomer, Ella; Liew, Danny

2018-05-01

Recent studies suggest that diabetes may impact work productivity. In the current study, we sought to estimate the lifetime and population impact of diabetes on productivity using the novel measure of "productivity-adjusted life years" (PALYs). Using age-specific mortality rates and a productivity index attributable to diabetes (akin to the quality of life index, but which adjusts for reduction in productivity) and life table modeling, we estimated years of life and PALYs lost to diabetes among Australians with diabetes currently aged 20-65 years, with follow-up until 69 years. Life tables were first constructed for the cohort with diabetes and then repeated for the same cohort but with the assumption that they no longer had diabetes. The "nondiabetic" cohort had lower mortality rates and improved productivity. The differences in total years of life lived and PALYs lived between the two cohorts reflected the impact of diabetes. Overall, diabetes reduced total years of life lived by the cohort by 190,219 years or almost 3%. Diabetes reduced PALYs by 11.6% and 10.5% among men and women, respectively. For both sexes, the impact of diabetes on productivity was lowest in those aged 65-69 years and highest in those 20-24 years. Among the latter, PALYs were reduced by 12.2% and 11.0% for men and women, respectively. Elimination of diabetes can prolong life years lived by the whole population and increase the amount of productive years lived. Employers and government should be aware that having diabetes affects work force productivity and implement prevention programs to reduce the impact of diabetes on the workforce. © 2018 by the American Diabetes Association.

Measuring physicians' productivity in a Veterans' Affairs Medical Center.

PubMed

Coleman, David L; Moran, Eileen; Serfilippi, Delchi; Mulinski, Paul; Rosenthal, Ronnie; Gordon, Bruce; Mogielnicki, R Peter

2003-07-01

The mission of the Department of Veterans Affairs includes patient care, education, research, and backup to the Department of Defense. Because the measurement of physicians' productivity must reflect both institutional goals and market forces, the authors designed a productivity model that uses measures of clinical workload and academic activities commensurate with the VA's investments in these activities. The productivity model evaluates four domains of physicians' activity: clinical work, education, research, and administration. Examples of the application of the productivity model in the evaluation of VA-paid physician-staff and in the composition of contracts for clinical services are provided. The proposed model is a relatively simple strategy for measuring a broad range of the work of academic physicians in VA medical centers. The model provides incentives for documentation of resident supervision and participation in administrative activities required for effective and efficient clinical care. In addition, the model can aid in determining resource distribution among clinical services and permits comparison with non-VA health care systems. A strategy for modifying the model to incorporate measures of quality of clinical care, research, education, and administration is proposed. The model has been a useful part of the process to ensure the optimum use of resources and to meet clinical and academic institutional goals. The activities and accomplishments used to define physician productivity will have a substantial influence on the character of the medical profession, the vitality of medical education and research, and the cost and quality of health care.

Workforce 2000. A Bibliography.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This bibliography contains citations locating information about the future U.S. work force. Because of demographic, economic, and technological developments, significant changes are predicted in both the nature of work and the composition of the work force by the year 2000. Projections, viewpoints, and suggested responses to these changes from…

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants.

PubMed

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-08-11

Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment ; (2) work and life under duress ; and (3) impossibility to leave employer . Forced labour is positive if any one of the dimensions is positive. Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment , 71% work and life under duress and 14% impossibility to leave employer . Overall, 73% experienced forced labour during their most recent labour migration.Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Influence of Different Container Closure Systems and Capping Process Parameters on Product Quality and Container Closure Integrity (CCI) in GMP Drug Product Manufacturing.

PubMed

Mathaes, Roman; Mahler, Hanns-Christian; Roggo, Yves; Huwyler, Joerg; Eder, Juergen; Fritsch, Kamila; Posset, Tobias; Mohl, Silke; Streubel, Alexander

2016-01-01

Capping equipment used in good manufacturing practice manufacturing features different designs and a variety of adjustable process parameters. The overall capping result is a complex interplay of the different capping process parameters and is insufficiently described in literature. It remains poorly studied how the different capping equipment designs and capping equipment process parameters (e.g., pre-compression force, capping plate height, turntable rotating speed) contribute to the final residual seal force of a sealed container closure system and its relation to container closure integrity and other drug product quality parameters. Stopper compression measured by computer tomography correlated to residual seal force measurements.In our studies, we used different container closure system configurations from different good manufacturing practice drug product fill & finish facilities to investigate the influence of differences in primary packaging, that is, vial size and rubber stopper design on the capping process and the capped drug product. In addition, we compared two large-scale good manufacturing practice manufacturing capping equipment and different capping equipment settings and their impact on product quality and integrity, as determined by residual seal force.The capping plate to plunger distance had a major influence on the obtained residual seal force values of a sealed vial, whereas the capping pre-compression force and the turntable rotation speed showed only a minor influence on the residual seal force of a sealed vial. Capping process parameters could not easily be transferred from capping equipment of different manufacturers. However, the residual seal force tester did provide a valuable tool to compare capping performance of different capping equipment. No vial showed any leakage greater than 10(-8)mbar L/s as measured by a helium mass spectrometry system, suggesting that container closure integrity was warranted in the residual seal force range tested for the tested container closure systems. Capping equipment used in good manufacturing practice manufacturing features different designs and a variety of adjustable process parameters. The overall capping result is a complex interplay of the different capping process parameters and is insufficiently described in the literature. It remains poorly studied how the different capping equipment designs and capping equipment process parameters contribute to the final capping result.In this study, we used different container closure system configurations from different good manufacturing process drug product fill & finish facilities to investigate the influence of the vial size and the rubber stopper design on the capping process. In addition, we compared two examples of large-scale good manufacturing process capping equipment and different capping equipment settings and their impact on product quality and integrity, as determined by residual seal force. © PDA, Inc. 2016.

Black/immigrant competition re-assessed: new evidence from Los Angeles.

PubMed

Waldinger, R

1997-01-01

Findings are presented from a survey of employers conducted to assess the impact of immigration and employer practices upon the chances of Blacks finding employment in Los Angeles. The highest ranking person involved in the hiring process at each of 44 restaurants, 46 printers, 41 hotels, and 39 furniture manufacturers was interviewed. The hiring of new employees drawn from the network of current employees seems to have the dual function of bringing immigrant communities into the workplace, while detaching vacancies from the open market, thereby reducing the number of employment opportunities for Blacks. Employers also perceived immigrants to be far more desirable employees than Blacks, partly because they believe that immigrants will work more productively. Immigrants are also seen as the more tractable laborers. Any managerial propensity to favor immigrants over Blacks will probably be reinforced by the attitudes of the mainly Latino work force, for placing a Black worker in a mainly Latino work crew may frustrate productivity given the animosity between the two ethnic groups. Blacks also appear to opt out of the low-level labor market in response to rising expectations, on the one hand, and the anticipation of encountering employment difficulties on the other.

Enabling the Tablet Product Development of 5-Fluorocytosine by Conjugate Acid Base Cocrystals.

PubMed

Perumalla, Sathyanarayana R; Paul, Shubhajit; Sun, Changquan C

2016-06-01

5-Fluorocytosine (FC) is a high-dose antifungal drug that challenges the development of a tablet product due to poor solid-state stability and tabletability. Using 2 pharmaceutically acceptable conjugate acid base (CAB) cocrystals of FC with HCl and acesulfame, we have developed commercially viable high loading FC tablets. The tablets were prepared by direct compression using nano-coated microcrystalline cellulose Avicel PH105 as a tablet binder, which provided both excellent tabletability and good flowability. Commercial manufacturability of formulations based on both CAB cocrystals was verified on a compaction simulator. The results from an expedited friability study were used to set the compaction force, which yielded tablets with sufficient mechanical strength and rapid tablet disintegration. This work demonstrates the potential value of CAB cocrystals in drug product development. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Effects of N-acetylcysteine on isolated skeletal muscle contractile properties after an acute bout of aerobic exercise.

PubMed

Jannig, Paulo R; Alves, Christiano R R; Voltarelli, Vanessa A; Bozi, Luiz H M; Vieira, Janaina S; Brum, Patricia C; Bechara, Luiz R G

2017-12-15

The current study tested the hypotheses that 1) an acute bout of aerobic exercise impairs isolated skeletal muscle contractile properties and 2) N-acetylcysteine (a thiol antioxidant; NAC) administration can restore the impaired muscle contractility after exercise. At rest or immediately after an acute bout of aerobic exercise, extensor digitorum longus (EDL) and soleus muscles from male Wistar rats were harvested for ex vivo skeletal muscle contraction experiments. Muscles from exercised animals were incubated in Krebs Ringer's buffer in absence or presence of 20mM of NAC. Force capacity and fatigue properties were evaluated. Exercised EDL and soleus displayed lower force production across various stimulation frequencies (p<0.001), indicating that skeletal muscle force production was impaired after an acute bout of exercise. However, NAC treatment restored the loss of force production in both EDL and soleus after fatiguing exercise (p<0.05). Additionally, NAC treatment increased relative force production at different time points during a fatigue-induced protocol, suggesting that NAC treatment mitigates fatigue induced by successive contractions. NAC treatment improves force capacity and fatigue properties in ex vivo skeletal muscle from rats submitted to an acute bout of aerobic exercise. Copyright © 2017 Elsevier Inc. All rights reserved.

The effect of coracoacromial ligament excision and acromioplasty on the amount of rotator cuff force production necessary to restore intact glenohumeral biomechanics.

PubMed

Budoff, Jeffrey E; Lin, Cheng-Li; Hong, Chih-Kai; Chiang, Florence L; Su, Wei-Ren

2016-06-01

Coracoacromial ligament (CAL) excision and acromioplasty increase superior and anterosuperior glenohumeral translation. It is unknown how much of an increase in rotator cuff force production is required to re-establish intact glenohumeral biomechanics after these surgical procedures. We hypothesized that, after CAL excision and acromioplasty, an increase in rotator cuff force production would not be necessary to reproduce the anterosuperior and superior translations of the intact specimens. Nine cadaveric shoulders were subjected to loading in the superior and anterosuperior directions in the intact state after CAL excision, acromioplasty, and recording of the translations. The rotator cuff force was then increased to normalize glenohumeral biomechanics. After CAL excision at 150 and 200 N of loading, an increase in the rotator cuff force by 25% decreased anterosuperior translation to the point where there was no significant difference from the intact specimen's translation. After acromioplasty (and CAL excision) at 150 and 200 N, an increase in the rotator cuff force of 25% and 30%, respectively, decreased superior translation to the point where there was no significant difference from the intact specimen's translation. At 150 to 200 N of loading, CAL excision and acromioplasty increase the rotator cuff force required to maintain normal glenohumeral biomechanics by 25% to 30%. After a subacromial decompression, the rotator cuff has an increased force production requirement to maintain baseline glenohumeral mechanics. Under many circumstances, in vivo force requirements may be even greater after surgical attenuation of the coracoacromial arch. Basic Science Study; Biomechanics. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.