Stark County Area Transportation Study - Transportation Improvement Program 1997-2000

DOT National Transportation Integrated Search

1996-05-01

The Transportation Improvement Program (TIP) is the schedule of highway and transit improvements recommended for implementation within the next four years. It is, therefore, the end product of the transportation planning process. The TIP originates f...

Using program impact pathways to understand and improve program delivery, utilization, and potential for impact of Helen Keller International's homestead food production program in Cambodia.

PubMed

Olney, Deanna K; Vicheka, Sao; Kro, Meng; Chakriya, Chhom; Kroeun, Hou; Hoing, Ly Sok; Talukder, Aminzzaman; Quinn, Victoria; Iannotti, Lora; Becker, Elisabeth; Roopnaraine, Terry

2013-06-01

Evidence of the impact of homestead food production programs on nutrition outcomes such as anemia and growth is scant. In the absence of information on program impact pathways, it is difficult to understand why these programs, which have been successful in increasing intake of micronutrient-rich foods, have had such limited documented impact on nutrition outcomes. To conduct a process evaluation of Helen Keller International's (HKI's) homestead food production program in Cambodia to assess whether the program was operating as planned (in terms of design, delivery, and utilization) and to identify ways in which the program might need to be strengthened in order to increase its potential for impact. A program theory framework, which laid out the primary components along the hypothesized program impact pathways, was developed in collaboration with HKI and used to design the research. Semistructured interviews and focus group discussions with program beneficiaries (n = 36 and 12, respectively), nonbeneficiaries (n = 12), and program implementers (n = 17 and 2, respectively) and observations of key program delivery points, including health and nutrition training sessions (n = 6), village model farms (n = 6), and household gardens of beneficiaries (n = 36) and nonbeneficiaries (n = 12), were conducted to assess the delivery and utilization of the primary program components along the impact pathways. The majority of program components were being delivered and utilized as planned. However, challenges with some of the key components posited to improve outcomes such as anemia and growth were noted. Among these were a gap in the expected pathway from poultry production to increased intake of eggs and poultry meat, and some weaknesses in the delivery of the health and nutrition training sessions and related improvements in knowledge among the village health volunteers and beneficiaries. Although the program has been successful in delivering the majority of the program components as planned and has documented achievements in improving household production and intake of micronutrient-rich foods, it is likely that strengthening delivery and increasing utilization of some program components would increase its potential for nutritional impacts. This research has highlighted the importance of designing a program theory framework and assessing the components that lie along the primary program impact pathways to optimize program service delivery and utilization and, in turn, potential for impact.

Chemical Weapons Disposal: Improvements Needed in Program Accountability and Financial Management

DTIC Science & Technology

2000-05-01

United States General Accounting Office PAQ Report to Congressional Committees May 2000 CHEMICAL WEAPONS DISPOSAL Improvements Needed in Program...warfare materiel, and former production facilities and identify and locate buried chemical warfare materiel. Alternative Technologies and Approaches...production facilities, and buried chemical warfare materiel. These items are described in table 1. Table 1: Nonstockpile Chemical Materiel Category

Nasa's Emerging Productivity Program

NASA Technical Reports Server (NTRS)

Braunstein, D. R.

1984-01-01

The goals, membership, and organizational structure of the NASA Productivity Steering Committee are described as well as steps taken to make NASA a leader in the development and application of productivity and quality concepts at every level of agency management. The overall strategy for the Productivity Improvement and Quality Enhancement (PIQE) Program is through employee involvement, both civil servant and contractor, in all phases of agency-wide activity. Elements of the PIQE program and initial thrusts are examined.

Invest in People with a Staff Wellness Program.

ERIC Educational Resources Information Center

Bell, Spicer

1986-01-01

Adopting a wellness program for school personnel can reduce health insurance costs, workman's compensation insurance costs, absenteeism, and staff turnover while improving productivity and morale. Wellness programs focus on improving health and reducing the risk and impact of disease rather than on curing illnesses already contracted. Successful…

Total quality management: It works for aerospace information services

NASA Technical Reports Server (NTRS)

Erwin, James; Eberline, Carl; Colquitt, Wanda

1993-01-01

Today we are in the midst of information and 'total quality' revolutions. At the NASA STI Program's Center for AeroSpace Information (CASI), we are focused on using continuous improvements techniques to enrich today's services and products and to ensure that tomorrow's technology supports the TQM-based improvement of future STI program products and services. The Continuous Improvements Program at CASI is the foundation for Total Quality Management in products and services. The focus is customer-driven; its goal, to identify processes and procedures that can be improved and new technologies that can be integrated with the processes to gain efficiencies, provide effectiveness, and promote customer satisfaction. This Program seeks to establish quality through an iterative defect prevention approach that is based on the incorporation of standards and measurements into the processing cycle. Four projects are described that utilize cross-functional, problem-solving teams for identifying requirements and defining tasks and task standards, management participation, attention to critical processes, and measurable long-term goals. The implementation of these projects provides the customer with measurably improved access to information that is provided through several channels: the NASA STI Database, document requests for microfiche and hardcopy, and the Centralized Help Desk.

Motivation for Evaluation: A roadmap for Improving Program Efficacy

NASA Astrophysics Data System (ADS)

Taber, J. J.; Bohon, W.; Bravo, T. K.; Dorr, P. M.; Hubenthal, M.; Johnson, J. A.; Sumy, D. F.; Welti, R.; Davis, H. B.

2016-12-01

Over the past year, the Incorporated Research Institutions for Seismology (IRIS) Education and Public Outreach (EPO) program has undertaken a new effort to increase the rigor with which it evaluates its programs and products. More specifically we sought to make evaluation an integral part of our EPO staff's work, enable staff to demonstrate why we do the activities we do, enhance the impact or our products and programs, and empower staff to be able to make evidence-based claims. The challenges we faced included a modest budget, finding an applicable approach to both new and legacy programs ranging from formal and informal education to public outreach, and implementing the process without overwhelming staff. The Collaborative Impact Analysis Method (IAM; Davis and Scalice, 2015) was selected as it allowed us to combine the EPO staff's knowledge of programs, audiences and content with the expertise of an outside evaluation expert, through consultations and a qualitative rubric assessing the initial state of each product/program's evaluation. Staff then developed action plans to make incremental improvements to the evaluation of programs over time. We have found that this approach promotes the development of staff knowledge and skills regarding evaluation, provides a common language among staff, increases enthusiasm to collect and share data, encourages discussions of evaluative approaches when planning new activities, and improves each program's ability to capture the intended and unintended effects on the behaviors, attitudes, skills, interests, and/or knowledge of users/participants. We will share the initial IAM Scores for products and programs in the EPO portfolio, along with examples of the action plans for several key products and programs, and the impact that implementing those actions plans has had on our evaluations. Davis, H. & Scalice, D. (2015). Evaluate the Impact of your Education and Outreach Program Using the Quantitative Collaborative Impact Analysis Method (Invited). Abstract ED53D-0871 presented at 2015 Fall Meeting, AGU, San Francisco, Calif., 14 - 18 Dec.

Contamination Control Changes to the Reusable Solid Rocket Motor Program: A Ten Year Review

NASA Technical Reports Server (NTRS)

Bushman, David M.

1998-01-01

During the post Challenger period, the National Aeronautics and Space Administration and Thiokol implemented changes to the Reusable Solid Rocket Motor (RSRM) contract to include provisions for contamination control to enhance the production environment. During the ten years since those agreements for contamination controls were made, many changes have taken place in the production facilities at Thiokol. These changes have led to the production of much higher quality shuttle solid rocket motors and improved cleanliness and safety of operations in the production facilities. The experience in contamination control over this past decade highlights the value these changes have brought to the RSRM program, and how the system can be improved to meet the challenges the program will face in the next ten years.

Literacy and Workplace Change: Evaluation Findings from Eighteen Workplace Literacy Programs

ERIC Educational Resources Information Center

Benseman, John

2012-01-01

Many Western governments are looking to workplace literacy, language, and numeracy programs to address general skill improvement with a longterm aim of improving labor productivity. Rigorous research on these programs' effectiveness for both of these agendas, however, remains sparse and limited in scope. This article reports the findings of an…

An Integrated Theatre Production for School Nutrition Promotion Program

PubMed Central

Bush, Robert; Box, Selina; McCallum, David; Khalil, Stephanie

2018-01-01

In the context of stubbornly high childhood obesity rates, health promotion activities in schools provide a potential avenue to improve children’s nutritional behaviours. Theatre production has a rich history as a health behaviour promotion strategy but lacks sound, outcome-based evaluation. This study evaluated the effect of an integrated, two-part, place-based theatre performance program with 212 students in five schools in a regional urban and semi-rural area. The program included a theatre performance and a healthy eating competition. A brief survey assessed student healthy eating knowledge and attitudes at three time points. Nutrition behaviour was measured by scoring the contents of children’s lunch boxes before, during and up to six weeks after the intervention. Statistical analysis tested change over time on five variables (Knowledge, Attitude, Sometimes foods, Everyday foods, Overall lunch box score). Results showed that both components of the integrated program improved nutrition knowledge and that the theatre performance improved children’s healthy eating attitudes. All three lunch box scores peaked after the integrated program and remained significantly higher than baseline at 4–6 weeks follow-up. Interaction effects were identified for school catchment area on four of the five dependent variables. Evaluation of this integrated theatre production program indicates the potential benefit of taking a “super-setting” approach. It demonstrates an effect from students taking home information they had learned and incorporating it into lunch box preparation. It also showed consistent effects for school geographical catchment. This study suggests that, with careful, theory-based design, theatre productions in schools can improve student nutritional activities. PMID:29498690

An Integrated Theatre Production for School Nutrition Promotion Program.

PubMed

Bush, Robert; Capra, Sandra; Box, Selina; McCallum, David; Khalil, Stephanie; Ostini, Remo

2018-03-02

In the context of stubbornly high childhood obesity rates, health promotion activities in schools provide a potential avenue to improve children's nutritional behaviours. Theatre production has a rich history as a health behaviour promotion strategy but lacks sound, outcome-based evaluation. This study evaluated the effect of an integrated, two-part, place-based theatre performance program with 212 students in five schools in a regional urban and semi-rural area. The program included a theatre performance and a healthy eating competition. A brief survey assessed student healthy eating knowledge and attitudes at three time points. Nutrition behaviour was measured by scoring the contents of children's lunch boxes before, during and up to six weeks after the intervention. Statistical analysis tested change over time on five variables (Knowledge, Attitude, Sometimes foods, Everyday foods, Overall lunch box score). Results showed that both components of the integrated program improved nutrition knowledge and that the theatre performance improved children's healthy eating attitudes. All three lunch box scores peaked after the integrated program and remained significantly higher than baseline at 4-6 weeks follow-up. Interaction effects were identified for school catchment area on four of the five dependent variables. Evaluation of this integrated theatre production program indicates the potential benefit of taking a "super-setting" approach. It demonstrates an effect from students taking home information they had learned and incorporating it into lunch box preparation. It also showed consistent effects for school geographical catchment. This study suggests that, with careful, theory-based design, theatre productions in schools can improve student nutritional activities.

Structured Design Language for Computer Programs

NASA Technical Reports Server (NTRS)

Pace, Walter H., Jr.

1986-01-01

Box language used at all stages of program development. Developed to provide improved productivity in designing, coding, and maintaining computer programs. BOX system written in FORTRAN 77 for batch execution.

Genesis of an Employee Wellness Program at a Large University.

PubMed

Lloyd, Lisa K; Crixell, Sylvia H; Bezner, Janet R; Forester, Katherine; Swearingen, Carolyn

2017-11-01

University employee wellness programs have potential to support positive changes in employee health, thereby improving productivity and mitigating the rise in health care costs. The purpose of this article is to describe a theory-driven approach to systematically planning, developing, and implementing a comprehensive university employee wellness program. Long-term program goals were to improve employee health, well-being, and productivity by focusing on decreasing sedentary behavior, increasing physical activity, improving dietary habits, and reducing stress. An ecological approach was taken to identify levels of influence specific to a university setting: intrapersonal, interpersonal, department/college/division, and university. This framework guided the development of program components and strategies, which were grounded in several health behavior change theories. Input from supervisors and employees was incorporated throughout program development. A 15-week trial run, involving 514 employees, was evaluated to fine-tune services. Participation and feedback were positive, demonstrating that the program was valued. Support from upper administration is evidenced by continued funding. Critical factors to the successful launch of the program included a supportive administration, leverage of existing facilities and equipment, leadership provided by faculty, and service delivery by students.

Increasing productivity of the McAuto CAD/CAE system by user-specific applications programming

NASA Technical Reports Server (NTRS)

Plotrowski, S. M.; Vu, T. H.

1985-01-01

Significant improvements in the productivity of the McAuto Computer-Aided Design/Computer-Aided Engineering (CAD/CAE) system were achieved by applications programming using the system's own Graphics Interactive Programming language (GRIP) and the interface capabilities with the main computer on which the system resides. The GRIP programs for creating springs, bar charts, finite element model representations and aiding management planning are presented as examples.

Labor productivity, perceived effectiveness, and sustainability of innovative projects.

PubMed

Makai, Peter; Cramm, Jane M; van Grotel, Marloes; Nieboer, Anna P

2014-01-01

To assess labor productivity, perceived effectiveness, and sustainability of a national quality program that sought to stimulate efficiency gains through increased labor productivity while maintaining quality through implementing small-scale innovation projects. Longitudinal measures of labor productivity and quality were collected at baseline and after completion of the innovation projects. Perceived effectiveness and sustainability (measured by routinization) were assessed cross-sectionally after project completion. This study was conducted in The Netherlands. Ninety-eight improvement projects in long-term care organizations. A national quality program to stimulate innovative approaches in long-term care. Labor productivity, perceived effectiveness, and sustainability were the main outcome measures. Labor productivity data were available for only 37 (38%) of the 98 projects, 33 (89%) of which demonstrated significantly improved efficiency. Perceived effectiveness was significantly associated with sustainability (0.29; p < .05), but not labor productivity. To achieve sustainability in long-term care, developers of innovative projects must collect better quality information on efficiency gains in terms of labor productivity and focus more on efficiency improvement. More research is necessary to explore relationships between labor productivity, perceived effectiveness, and sustainability. © 2012 National Association for Healthcare Quality.

Elementary Keyboarding Software Product Reports.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This report provides detailed product descriptions of 45 software programs designed to teach or improve the keyboarding skills of elementary school students that were identified by the MicroSIFT (Microcomputer Information and Software for Teachers) staff. The descriptions include program titles, producer names, costs, grade levels, hardware,…

Advanced concepts in biomass production and pretreatment. Annual report, April 1986-March 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hiler, E.A.; Miller, F.R.; Dominy, R.E.

1987-04-01

The objective of the research is to develop an integrated system for methane production utilizing terrestrial biomass as the feedstock. The report provides specifics of research activities in the Texas A and M biomass program sponsored by Gas Research Institute and co-funded by Texas Agricultural Experiment Station. Researchers in the program include plant geneticists, plant physiologists, chemists, agronomists, ruminant physiologists, agricultural engineers, biochemical engineers, and agricultural economists. Major research emphases are genetic manipulation, physiology and production systems, harvesting, storage, processing and conversion systems, inhibitors, and economic and system analyses. During the past year, increasing emphasis was placed on the biologicalmore » pretreatment aspects of the program because of the critical importance of the area to the improved efficiency of the overall system. In the breeding, tissue culture, and production programs, continued substantial progress was made in identifying and characterizing sorghums that will produce high biomass yields and have improved lodging resistance and high uniformity. Economic and systems analyses provided important information regarding optimal overall systems.« less

Europe Report, Science and Technology

DTIC Science & Technology

1986-09-30

to certain basic products of the food industry such as beer, vinegar , 51 spirits, starches, etc. It is also assumed that modern biotechnologies...Czechoslovak food production. This is also the objective of innovative and modernizing programs in the fermented food sectors. The program for the...cattle and improves fodder utilization, assuming balanced doses of fodder. The development of fermentation techniques of production will occur within

Tree improvement opportunities in the North-Central States related to economic trends, a problem analysis.

Treesearch

David H. Dawson; John A. Pitcher

1970-01-01

Economic trends are interpreted and related to planning applied forest tree-improvement programs for the North-Central Region. Projected demands for forest products are considered in light of the forest resource and alternatives for its use. Suggestions are given for tree-improvement programs for seven conifer and three hardwood species.

A Comparative Analysis of the Resources Required for Test and Evaluation on Army-Led Weapon System Programs, Based Upon Program Size and Acquisition Management Complexity

DTIC Science & Technology

2007-12-01

Program Manager PMO Program Manager Office POM Program Objective Memorandum PPE Personal Protective Equipment PPT Production Prove...test • Technical feasibility test • Engineering development test • Production prove-out test ( PPT ) • Software qualification test 22 • Live fire...improvement BIDS (P3I) system is equipped with a detection suite to include high volume samplers, a fluorescent particle counter/sizer, a flow

Clean Up Your School Custodial Program.

ERIC Educational Resources Information Center

Steller, Arthur W.; Pell, Carroll

1986-01-01

Administrators can improve their school's custodial program by following steps that increase productivity, reduce costs, and provide long-term benefits of higher cleanliness standards. Administrators should work toward improved building cleanliness by insisting on a school board policy that establishes objectives for the custodial department.…

Wellness in Small Businesses. WBGH Worksite Wellness Series.

ERIC Educational Resources Information Center

Behrens, Ruth A.

Increasing numbers of small businesses are providing wellness activities for their employees. By instituting wellness programs, small businesses can improve employee morale, engender a commitment from employees, enhance the feeling of "family" among employees, improve worker productivity, and contain health care costs. Wellness programs are…

36 CFR 230.7 - Program practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... productivity, vigor, and health, and the value and quality of wood products. (4) Windbreak and Hedgerow... improvement of water quality and soil productivity on forest land. (6) Riparian and Wetland Protection and...

Modifying the Toyota Production System for continuous performance improvement in an academic children's hospital.

PubMed

Stapleton, F Bruder; Hendricks, James; Hagan, Patrick; DelBeccaro, Mark

2009-08-01

The Toyota Production System (TPS) has become a successful model for improving efficiency and eliminating errors in manufacturing processes. In an effort to provide patients and families with the highest quality clinical care, our academic children's hospital has modified the techniques of the TPS for a program in continuous performance improvement (CPI) and has expanded its application to educational and research programs. Over a period of years, physicians, nurses, residents, administrators, and hospital staff have become actively engaged in a culture of continuous performance improvement. This article provides background into the methods of CPI and describes examples of how we have applied these methods for improvement in clinical care, resident teaching, and research administration.

Improving Water Management Decision Support Tools Using NASA Satellite and Modeling Data

NASA Astrophysics Data System (ADS)

Toll, D. L.; Arsenault, K.; Nigro, J.; Pinheiro, A.; Engman, E. T.; Triggs, J.; Cosgrove, B.; Alonge, C.; Boyle, D.; Allen, R.; Townsend, P.; Ni-Meister, W.

2006-05-01

One of twelve Applications of National priority within NASA's Applied Science Program, the Water Management Program Element addresses concerns and decision making related to water availability, water forecast and water quality. The goal of the Water Management Program Element is to encourage water management organizations to use NASA Earth science data, models products, technology and other capabilities in their decision support tools for problem solving. The Water Management Program Element partners with Federal agencies, academia, private firms, and may include international organizations. This paper further describes the Water Management Program with the objective of informing the applications community of the potential opportunities for using NASA science products for problem solving. We will illustrate some ongoing and application Water Management projects evaluating and benchmarking NASA data with partnering federal agencies and their decision support tools: 1) Environmental Protection Agency for water quality; 2) Bureau of Reclamation for water supply, demand and forecast; and 3) NOAA National Weather Service for improved weather prediction. Examples of the types of NASA contributions to the these agency decision support tools include: 1) satellite observations within models assist to estimate water storage, i.e., snow water equivalent, soil moisture, aquifer volumes, or reservoir storages; 2) model derived products, i.e., evapotranspiration, precipitation, runoff, ground water recharge, and other 4-dimensional data assimilation products; 3) improve water quality, assessments by using improved inputs from NASA models (precipitation, evaporation) and satellite observations (e.g., temperature, turbidity, land cover) to nonpoint source models; and 4) water (i.e., precipitation) and temperature predictions from days to decades over local, regional and global scales.

Employer Health and Productivity Roadmap™ strategy.

PubMed

Parkinson, Michael D

2013-12-01

The National Institute for Occupational Safety and Health Total Worker Health™ Program defines essential elements of an integrated health protection and health promotion model to improve the health, safety, and performance of employers and employees. The lack of a clear strategy to address the core drivers of poor health, excessive medical costs, and lost productivity has deterred a comprehensive, integrated, and proactive approach to meet these challenges. The Employer Health and Productivity Roadmap™, comprising six interrelated and integrated core elements, creates a framework of shared accountability for both employers and their health and productivity partners to implement and monitor actionable measures that improve health, maximize productivity, and reduce excessive costs. The strategy is most effective when linked to a financially incentivized health management program or consumer-directed health plan insurance benefit design.

The Productive Ward Program™: A Two-Year Implementation Impact Review Using a Longitudinal Multilevel Study.

PubMed

Van Bogaert, Peter; Van Heusden, Danny; Verspuy, Martijn; Wouters, Kristien; Slootmans, Stijn; Van der Straeten, Johnny; Van Aken, Paul; White, Mark

2017-03-01

Aim To investigate the impact of the quality improvement program "Productive Ward - Releasing Time to Care™" using nurses' and midwives' reports of practice environment, burnout, quality of care, job outcomes, as well as workload, decision latitude, social capital, and engagement. Background Despite the requirement for health systems to improve quality and the proliferation of quality improvement programs designed for healthcare, the empirical evidence supporting large-scale quality improvement programs impacting patient satisfaction, staff engagement, and quality care remains sparse. Method A longitudinal study was performed in a large 600-bed acute care university hospital at two measurement intervals for nurse practice environment, burnout, and quality of care and job outcomes and three measurement intervals for workload, decision latitude, social capital, and engagement between June 2011 and November 2014. Results Positive results were identified in practice environment, decision latitude, and social capital. Less favorable results were identified in relation to perceived workload, emotional exhaustion. and vigor. Moreover, measures of quality of care and job satisfaction were reported less favorably. Conclusion This study highlights the need to further understand how to implement large-scale quality improvement programs so that they integrate with daily practices and promote "quality improvement" as "business as usual."

Role of genetic improvement in the Short Rotation Woody Crops Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Layton, P.A.; Wright, L.L.

1986-01-01

A major effort in the Short Rotation Woody Crops Program (SRWCP) is species screening and genetic improvement of selected species. Of the 125 species initially evaluated for SRIC, 20 are being seriously considered with most of emphasis on 16 hardwood species. Range-wide seed collections of 12 species were provenance tested; these include Platanus occidentalis (sycamore), Alnus glutinosa (European black alder), and Robinia pseudoacacia (black locust). Based on the results of these tests, highly productive, site-specific seed sources are being chosen for several geographic regions. Three of these species re currently being bred for increased productivity in SRIC systems. Genetic improvementmore » is viewed as a tool for increasing productivity, having anticipated gains of 40 to 50%. The techniques of somaclonal screening and genetic engineering are being evaluated for their usefulness in the SRIC improvement program. Currently, salt-tolerant Atriplex canescens (four-wing saltbush) and herbicide-resistant Populus spp. are being sought via somaclonal screening. 35 refs., 4 figs., 3 tabs.« less

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/industry project designated Intergrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies.

Instructional Technology Must Contribute to Productivity

ERIC Educational Resources Information Center

Molenda, Michael

2009-01-01

Those involved in instructional technology in higher education are urged to view instructional technology as a means of improving academic productivity. Instructional technology has been used for over forty years to analyze instructional problems and design solutions that reduce costs and improve learning outcomes. The Pew Program in Course…

An intervention program with the aim to improve and maintain work productivity for workers with rheumatoid arthritis: design of a randomized controlled trial and cost-effectiveness study

PubMed Central

2012-01-01

Background Workers with rheumatoid arthritis (RA) often experience restrictions in functioning at work and participation in employment. Strategies to maintain work productivity exist, but these interventions do not involve the actual workplace. Therefore the aim of this study is to investigate the (cost)effectiveness of an intervention program at the workplace on work productivity for workers with RA. Methods/design This study is a randomized controlled trial (RCT) in specialized rheumatology treatment centers in or near Amsterdam, the Netherlands. Randomisation to either the control or the intervention group is performed at patient level. Both groups will receive care as usual by the rheumatologist, and patients in the intervention group will also take part in the intervention program. The intervention program consists of two components; integrated care, including a participatory workplace intervention. Integrated care involves a clinical occupational physician, who will act as care manager, to coordinate the care. The care manager has an intermediate role between clinical and occupational care. The participatory workplace intervention will be guided by an occupational therapist, and involves problem solving by the patient and the patients’ supervisor. The aim of the workplace intervention is to achieve consensus between patient and supervisor concerning feasible solutions for the obstacles for functioning at work. Data collection will take place at baseline and after 6 and 12 months by means of a questionnaire. The primary outcome measure is work productivity, measured by hours lost from work due to presenteeism. Secondary outcome measures include sick leave, quality of life, pain and fatigue. Cost-effectiveness of the intervention program will be evaluated from the societal perspective. Discussion Usual care of primary and outpatient health services is not aimed at improving work productivity. Therefore it is desirable to develop interventions aimed at improving functioning at work. If the intervention program will be (cost)effective, substantial improvements in work productivity might be obtained among workers with RA at lower costs. Results are expected in 2015. Trial registration number NTR2886 PMID:22747949

An intervention program with the aim to improve and maintain work productivity for workers with rheumatoid arthritis: design of a randomized controlled trial and cost-effectiveness study.

PubMed

van Vilsteren, Myrthe; Boot, Cécile R L; Steenbeek, Romy; van Schaardenburg, Dirkjan; Voskuyl, Alexandre E; Anema, Johannes R

2012-07-02

Workers with rheumatoid arthritis (RA) often experience restrictions in functioning at work and participation in employment. Strategies to maintain work productivity exist, but these interventions do not involve the actual workplace. Therefore the aim of this study is to investigate the (cost)effectiveness of an intervention program at the workplace on work productivity for workers with RA. This study is a randomized controlled trial (RCT) in specialized rheumatology treatment centers in or near Amsterdam, the Netherlands. Randomisation to either the control or the intervention group is performed at patient level. Both groups will receive care as usual by the rheumatologist, and patients in the intervention group will also take part in the intervention program. The intervention program consists of two components; integrated care, including a participatory workplace intervention. Integrated care involves a clinical occupational physician, who will act as care manager, to coordinate the care. The care manager has an intermediate role between clinical and occupational care. The participatory workplace intervention will be guided by an occupational therapist, and involves problem solving by the patient and the patients' supervisor. The aim of the workplace intervention is to achieve consensus between patient and supervisor concerning feasible solutions for the obstacles for functioning at work. Data collection will take place at baseline and after 6 and 12 months by means of a questionnaire. The primary outcome measure is work productivity, measured by hours lost from work due to presenteeism. Secondary outcome measures include sick leave, quality of life, pain and fatigue. Cost-effectiveness of the intervention program will be evaluated from the societal perspective. Usual care of primary and outpatient health services is not aimed at improving work productivity. Therefore it is desirable to develop interventions aimed at improving functioning at work. If the intervention program will be (cost)effective, substantial improvements in work productivity might be obtained among workers with RA at lower costs. Results are expected in 2015. NTR2886.

The National Shipbuilding Research Program, 1990 Ship Production Symposium, Paper No. 3B-2: Shipbuilding and the Malcolm Baldridge National Quality Award

DTIC Science & Technology

1990-08-01

Operational and Support Service Quality Improvement: Measurement of use of manpower, materials, energy and capital, relating to lead times, yields, waste...Achieved goal of improving product and service quality 10 fold between 1987 and 1989 n Service and product quality levels are approaching 99.9995 percent

Results-driven approach to improving quality and productivity

Treesearch

John Dramm

2000-01-01

Quality control (QC) programs do not often realize their full potential. Elaborate and expensive QC programs can easily get side tracked by the process of building a program with promises of “Someday, this will all pay off.” Training employees in QC methods is no guarantee that quality will improve. Several documented cases show that such activity-centered efforts...

Iterative evaluation in a mobile counseling and testing program to reach people of color at risk for HIV--new strategies improve program acceptability, effectiveness, and evaluation capabilities.

PubMed

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2011-06-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program's results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention's HIV testing recommendations.

Reminder: NCI Requests Cancer Targets for Monoclonal Antibody Production and Characterization | Office of Cancer Clinical Proteomics Research

Cancer.gov

In an effort to improve rigor and reproducibility, the National Cancer Institute (NCI) Antibody Characterization Program requests cancer-related protein targets for monoclonal antibody production and distribution to the scientific community. The program from The Office of Cancer Clinical Proteomics Research provides well-characterized

Industry Immersion for Reading and Mathematics Improvement. Valley Products Company.

ERIC Educational Resources Information Center

Jones, Paul L.; And Others

An intensive industry immersion program of reading and mathematics was conducted in Spring 1989 for employees at Valley Products, Inc., in a cooperative venture by the Literacy Foundation, Memphis, the Memphis City Schools Adult Education Program, and the company. Employee participants were assessed with the San Diego Quick Assessment Test to…

9 CFR 147.14 - Procedures to determine status and effectiveness of sanitation monitored program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Procedures to determine status and effectiveness of sanitation monitored program. 147.14 Section 147.14 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE LIVESTOCK IMPROVEMENT AUXILIARY PROVISIONS ON...

7 CFR 205.203 - Soil fertility and crop nutrient management practice standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling... materials. (c) The producer must manage plant and animal materials to maintain or improve soil organic... fertility to maintain or improve soil organic matter content in a manner that does not contribute to...

25 CFR 163.32 - Forest development.

Code of Federal Regulations, 2010 CFR

2010-04-01

... activities undertaken to improve the sustainable productivity of commercial Indian forest land. The program... productivity of commercial forest land with emphasis on accomplishing on-the-ground projects. Forest...

Improving workplace productivity--it isn't just about reducing absence.

PubMed

Harte, Kathy; Mahieu, Kathleen; Mallett, David; Norville, Julie; VanderWerf, Sander

2011-01-01

Employers must get more aggressive in their health and productivity strategies. A comprehensive strategy includes data analytics across health and lost-time programs, absence policies that meet today's needs for both employer and employee, health and wellness programs targeting modifiable health behaviors, and absence program administration that is aligned to operational goals. This article targets key aspects of a comprehensive long-term health and productivity strategic vision. An organization can use these aspects independently to address immediate tactical issues while it develops its broader strategy. The target areas include a view from the perspective of data management, absence program design and management, employee health and wellness, and behavioral health.

Execution of Educational Mechanical Production Programs for School Children

NASA Astrophysics Data System (ADS)

Itoh, Nobuhide; Itoh, Goroh; Shibata, Takayuki

The authors are conducting experience-based engineering educational programs for elementary and junior high school students with the aim to provide a chance for them to experience mechanical production. As part of this endeavor, we planned and conducted a program called “Fabrication of Original Magnet Plates by Casting” for elementary school students. This program included a course for leading nature laws and logical thinking method. Prior to the program, a preliminary program was applied to school teachers to get comments and to modify for the program accordingly. The children responded excellently to the production process which realizes their ideas, but it was found that the course on natural laws and logical methods need to be improved to draw their interest and attention. We will continue to plan more effective programs, deepening ties with the local community.

Impact of a musculoskeletal disability management program on medical costs and productivity in a large manufacturing company.

PubMed

Bunn, William B; Baver, Robin S; Ehni, Thomas K; Stowers, Allan D; Taylor, David D; Holloway, Anita M; Duong, Duyen; Pikelny, Dan B; Sotolongo, David

2006-12-01

To evaluate a program to reduce musculoskeletal disability-related absenteeism at a North American manufacturing facility. Staged communication and educational interventions targeting physicians to improve care of musculoskeletal conditions and reduce related absenteeism. The program was implemented in three 1-year stages. The first stage required physicians to complete assessment forms for employees claiming disability because of musculoskeletal injuries. The second stage added physician education programs focusing on current clinical guidelines. The third stage incorporated local physician education about the facility's onsite physical therapy program. Annual number of work-related injuries, days lost per injury and per scheduled full-time-equivalent (FTE) employee, light-duty days per injury, average annual indemnity per FTE, indemnity per injury, medical costs per FTE, and medical costs per injury were examined to determine the program's effectiveness. Overall productivity improved by a mean of 12.5 days per injured employee. Mean days lost per work-related injury decreased from 35.1 to 27.6. Number of light-duty days increased from 6.1 to 11.1 per work-related injury. Mean annual indemnity per work-related injury decreased from $9327 to $4493; mean annual medical costs per work-related injury decreased from $4848 to $2679. The annual incidence of musculoskeletal injuries declined by up to 50%. This intervention was associated with reduced musculoskeletal disability-related absenteeism and increased productivity. The program reduced medical costs per work-related injury and improved the company's communications and relationship with local physicians.

Designing programs to improve diets for maternal and child health: estimating costs and potential dietary impacts of nutrition-sensitive programs in Ethiopia, Nigeria, and India.

PubMed

Masters, William A; Rosettie, Katherine L; Kranz, Sarah; Danaei, Goodarz; Webb, Patrick; Mozaffarian, Dariush

2018-05-01

Improving maternal and child nutrition in resource-poor settings requires effective use of limited resources, but priority-setting is constrained by limited information about program costs and impacts, especially for interventions designed to improve diet quality. This study utilized a mixed methods approach to identify, describe and estimate the potential costs and impacts on child dietary intake of 12 nutrition-sensitive programs in Ethiopia, Nigeria and India. These potential interventions included conditional livestock and cash transfers, media and education, complementary food processing and sales, household production and food pricing programs. Components and costs of each program were identified through a novel participatory process of expert regional consultation followed by validation and calibration from literature searches and comparison with actual budgets. Impacts on child diets were determined by estimating of the magnitude of economic mechanisms for dietary change, comprehensive reviews of evaluations and effectiveness for similar programs, and demographic data on each country. Across the 12 programs, total cost per child reached (net present value, purchasing power parity adjusted) ranged very widely: from 0.58 to 2650 USD/year among five programs in Ethiopia; 2.62 to 1919 USD/year among four programs in Nigeria; and 27 to 586 USD/year among three programs in India. When impacts were assessed, the largest dietary improvements were for iron and zinc intakes from a complementary food production program in Ethiopia (increases of 17.7 mg iron/child/day and 7.4 mg zinc/child/day), vitamin A intake from a household animal and horticulture production program in Nigeria (335 RAE/child/day), and animal protein intake from a complementary food processing program in Nigeria (20.0 g/child/day). These results add substantial value to the limited literature on the costs and dietary impacts of nutrition-sensitive interventions targeting children in resource-limited settings, informing policy discussions and serving as critical inputs to future cost-effectiveness analyses focusing on disease outcomes.

Designing programs to improve diets for maternal and child health: estimating costs and potential dietary impacts of nutrition-sensitive programs in Ethiopia, Nigeria, and India

PubMed Central

Rosettie, Katherine L; Kranz, Sarah; Danaei, Goodarz; Webb, Patrick; Mozaffarian, Dariush; Bhattacharjee, Lalita; Chandrasekhar, S; Christensen, Cheryl; Desai, Sonalde; Kazi-Hutchins, Nabeeha; Levin, Carol; Paarlberg, Robert; Vosti, Steven; Adekugbe, Olayinka; Atomsa, Gudina Egata; Badham, Jane; Baye, Kaleab; Beyero, Mesfin; Covic, Namukolo; Dalton, Babukiika; Dufour, Charlotte; Fracassi, Patrizia; Getahun, Zewditu; Haidar, Jemal; Hailu, Tesfaye; Kebede, Aweke; Kinabo, Joyce; Kussaga, Jamal Bakari; Mavrotas, George; Mwanja, Wilson Waiswa; Oguntona, Babatunde; Oladipo, Abiodun; Oniang’o, Ruth; Sibanda, Simbarashe; Sodjinou, Roger; Tom, Carol; Wamani, Henry; Wendelin, Akwilina; Adhikari, Ramesh Kant; Amatya, Archana; Bhattarai, Manav; Brahmbhatt, Viral; Chandyo, Ram Krishna; Gulati, Seema; Kapil, Umesh; Mehta, Ranju; Mohan, Sailesh; Prabhakaran, D; Prakash, V; Puri, Seema; Roy, S K; Sharma, Rekha; Shivakoti, Sabnam; Thorne-Lyman, Andrew; Rana, Pooja Pandey; Trilok-Kumar, Geeta

2018-01-01

Abstract Improving maternal and child nutrition in resource-poor settings requires effective use of limited resources, but priority-setting is constrained by limited information about program costs and impacts, especially for interventions designed to improve diet quality. This study utilized a mixed methods approach to identify, describe and estimate the potential costs and impacts on child dietary intake of 12 nutrition-sensitive programs in Ethiopia, Nigeria and India. These potential interventions included conditional livestock and cash transfers, media and education, complementary food processing and sales, household production and food pricing programs. Components and costs of each program were identified through a novel participatory process of expert regional consultation followed by validation and calibration from literature searches and comparison with actual budgets. Impacts on child diets were determined by estimating of the magnitude of economic mechanisms for dietary change, comprehensive reviews of evaluations and effectiveness for similar programs, and demographic data on each country. Across the 12 programs, total cost per child reached (net present value, purchasing power parity adjusted) ranged very widely: from 0.58 to 2650 USD/year among five programs in Ethiopia; 2.62 to 1919 USD/year among four programs in Nigeria; and 27 to 586 USD/year among three programs in India. When impacts were assessed, the largest dietary improvements were for iron and zinc intakes from a complementary food production program in Ethiopia (increases of 17.7 mg iron/child/day and 7.4 mg zinc/child/day), vitamin A intake from a household animal and horticulture production program in Nigeria (335 RAE/child/day), and animal protein intake from a complementary food processing program in Nigeria (20.0 g/child/day). These results add substantial value to the limited literature on the costs and dietary impacts of nutrition-sensitive interventions targeting children in resource-limited settings, informing policy discussions and serving as critical inputs to future cost-effectiveness analyses focusing on disease outcomes. PMID:29522103

Employee wellness program evaluation.

DOT National Transportation Integrated Search

2008-12-01

Well-designed wellness programs can keep healthy employees healthy, support employees with : health risks to improve their health behaviors, and facilitate organizational efforts to achieve : workforce performance goals. : Productivity lost through a...

Improving TV Program Comprehensibility: Developmental Effects of Visual and Verbal Production Features.

ERIC Educational Resources Information Center

Calvert, Sandra L.; And Others

Preplays (critical material presented before a televised program) were inserted before three sections of a televised story to determine if they would improve children's attention and comprehension by providing overall plot structure for selecting and integrating important story events. The preplays varied on two orthogonal dimensions: presence or…

Interpersonal Influence Field Test, Impact Study and Expert Review. Improving Teaching Competencies Program.

ERIC Educational Resources Information Center

Hiscox, Suzanne B.; And Others

This report focuses on Interpersonal Influence (INF), an instructional system developed by the Improving Teaching Competencies Program at the Northwest Regional Educational Laboratory. The stated purpose of the system is to provide classroom teachers with a set of skills and concepts that can help them engage in productive, collaborative efforts…

Impact of a process improvement program in a production software environment: Are we any better?

NASA Technical Reports Server (NTRS)

Heller, Gerard H.; Page, Gerald T.

1990-01-01

For the past 15 years, Computer Sciences Corporation (CSC) has participated in a process improvement program as a member of the Software Engineering Laboratory (SEL), which is sponsored by GSFC. The benefits CSC has derived from involvement in this program are analyzed. In the environment studied, it shows that improvements were indeed achieved, as evidenced by a decrease in error rates and costs over a period in which both the size and the complexity of the developed systems increased substantially. The principles and mechanics of the process improvement program, the lessons CSC has learned, and how CSC has capitalized on these lessons are also discussed.

Forest productivity: producing goods and services for people

Treesearch

Thomas R. Crow; Daniel C. Dey; Don Riemenschneider

2006-01-01

Presents the progress made by North Central Research Station scientists working in the Forest Productivity Integrated Research and Development Program over the past several years. We discuss policy relevant research on assessing productivity, modeling potential, productivity, and improving productivity within the conceptual framework for research and development in the...

Definition study for variable cycle engine testbed engine and associated test program

NASA Technical Reports Server (NTRS)

Vdoviak, J. W.

1978-01-01

The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

Genuine worker participation-an indispensable key to effective global OHS.

PubMed

Brown, Garrett

2009-01-01

Working conditions, including workplace safety, in global supply chains of products sold by transnational corporations have only marginally improved over the last 15 years despite the development of hundreds of corporate "codes of conduct," code monitoring systems, and an elaborate new "corporate social responsibility" industry. The two underlying reasons for the lack of significant change are: 1) a schizophrenic business model which fatally undermines "socially responsible" sourcing programs with unyielding dictates for the lowest possible production costs; and 2) the lack of any meaningful participation by shop-floor workers in plant safety programs. Only when trained, empowered, and active workers are an integral part of workplace safety programs will conditions improve over the long term.

Coverage of Nutrition Interventions Intended for Infants and Young Children Varies Greatly across Programs: Results from Coverage Surveys in 5 Countries.

PubMed

Leyvraz, Magali; Aaron, Grant J; Poonawala, Alia; van Liere, Marti J; Schofield, Dominic; Myatt, Mark; Neufeld, Lynnette M

2017-05-01

Background: The efficacy of a number of interventions that include fortified complementary foods (FCFs) or other products to improve infant and young child feeding (IYCF) is well established. Programs that provide such products free or at a subsidized price are implemented in many countries around the world. Demonstrating the impact at scale of these programs has been challenging, and rigorous information on coverage and utilization is lacking. Objective: The objective of this article is to review key findings from 11 coverage surveys of IYCF programs distributing or selling FCFs or micronutrient powders in 5 countries. Methods: Programs were implemented in Ghana, Cote d'Ivoire, India, Bangladesh, and Vietnam. Surveys were implemented at different stages of program implementation between 2013 and 2015. The Fortification Assessment Coverage Toolkit (FACT) was developed to assess 3 levels of coverage (message: awareness of the product; contact: use of the product ≥1 time; and effective: regular use aligned with program-specific goals), as well as barriers and factors that facilitate coverage. Analyses included the coverage estimates, as well as an assessment of equity of coverage between the poor and nonpoor, and between those with poor and adequate child feeding practices. Results: Coverage varied greatly between countries and program models. Message coverage ranged from 29.0% to 99.7%, contact coverage from 22.6% to 94.4%, and effective coverage from 0.8% to 88.3%. Beyond creating awareness, programs that achieved high coverage were those with effective mechanisms in place to overcome barriers for both supply and demand. Conclusions: Variability in coverage was likely due to the program design, delivery model, quality of implementation, and product type. Measuring program coverage and understanding its determinants is essential for program improvement and to estimate the potential for impact of programs at scale. Use of the FACT can help overcome this evidence gap.

Coverage of Nutrition Interventions Intended for Infants and Young Children Varies Greatly across Programs: Results from Coverage Surveys in 5 Countries123

PubMed Central

Aaron, Grant J; Poonawala, Alia; van Liere, Marti J; Schofield, Dominic; Myatt, Mark

2017-01-01

Background: The efficacy of a number of interventions that include fortified complementary foods (FCFs) or other products to improve infant and young child feeding (IYCF) is well established. Programs that provide such products free or at a subsidized price are implemented in many countries around the world. Demonstrating the impact at scale of these programs has been challenging, and rigorous information on coverage and utilization is lacking. Objective: The objective of this article is to review key findings from 11 coverage surveys of IYCF programs distributing or selling FCFs or micronutrient powders in 5 countries. Methods: Programs were implemented in Ghana, Cote d’Ivoire, India, Bangladesh, and Vietnam. Surveys were implemented at different stages of program implementation between 2013 and 2015. The Fortification Assessment Coverage Toolkit (FACT) was developed to assess 3 levels of coverage (message: awareness of the product; contact: use of the product ≥1 time; and effective: regular use aligned with program-specific goals), as well as barriers and factors that facilitate coverage. Analyses included the coverage estimates, as well as an assessment of equity of coverage between the poor and nonpoor, and between those with poor and adequate child feeding practices. Results: Coverage varied greatly between countries and program models. Message coverage ranged from 29.0% to 99.7%, contact coverage from 22.6% to 94.4%, and effective coverage from 0.8% to 88.3%. Beyond creating awareness, programs that achieved high coverage were those with effective mechanisms in place to overcome barriers for both supply and demand. Conclusions: Variability in coverage was likely due to the program design, delivery model, quality of implementation, and product type. Measuring program coverage and understanding its determinants is essential for program improvement and to estimate the potential for impact of programs at scale. Use of the FACT can help overcome this evidence gap. PMID:28404839

Improved Training Program for Fall Prevention of Warfighters with Lower Extremity Trauma

DTIC Science & Technology

2016-10-01

productive, active civilian life. The training program utilizes a microprocessor -controlled treadmill designed to deliver task- specific training...National Military Medical Center (WRNMMC), and Mayo. The fall prevention training program utilizes a microprocessor -controlled treadmill to deliver

Nutritional programming of reproductive development in heifers

USDA-ARS?s Scientific Manuscript database

Developmental programming is the biological process by which environmental factors influence the development of the organs and tissues in the body. There are two areas of developmental programming being investigated with applicability to beef production systems to improve performance of replacement...

ITERATIVE EVALUATION IN A MOBILE COUNSELING AND TESTING PROGRAM TO REACH PEOPLE OF COLOR AT RISK FOR HIV—NEW STRATEGIES IMPROVE PROGRAM ACCEPTABILITY, EFFECTIVENESS, AND EVALUATION CAPABILITIES

PubMed Central

Spielberg, Freya; Kurth, Ann; Reidy, William; McKnight, Teka; Dikobe, Wame; Wilson, Charles

2016-01-01

This article highlights findings from an evaluation that explored the impact of mobile versus clinic-based testing, rapid versus central-lab based testing, incentives for testing, and the use of a computer counseling program to guide counseling and automate evaluation in a mobile program reaching people of color at risk for HIV. The program’s results show that an increased focus on mobile outreach using rapid testing, incentives and health information technology tools may improve program acceptability, quality, productivity and timeliness of reports. This article describes program design decisions based on continuous quality assessment efforts. It also examines the impact of the Computer Assessment and Risk Reduction Education computer tool on HIV testing rates, staff perception of counseling quality, program productivity, and on the timeliness of evaluation reports. The article concludes with a discussion of implications for programmatic responses to the Centers for Disease Control and Prevention’s HIV testing recommendations. PMID:21689041

What You Can Do to Boost America's Productivity.

ERIC Educational Resources Information Center

Radvany, John E.

1979-01-01

Discusses factors contributing to the declining U.S. productivity growth rate and compares U.S. production to Germany and Japan. Presents model programs that have recognized the need to develop in people the desire to work, study, improve, and become more productive citizens. (LRA)

A Study of the Feasibility of Marketing Programming for Educational R & D Products.

ERIC Educational Resources Information Center

Sikorski, Linda A.; Hutchins, C. L.

This document argues the need for improved procedures for planning educational change. Specifically, it argues for a marketing approach which involves starting with the real needs of a particular population and planning a coordinated set of products and programs to serve those needs. The authors focus on using marketing concepts and techniques to…

OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS & HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2004-10-01

The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit-fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all major preparations for themore » high pressure drilling campaign. Baker Hughes encountered difficulties in providing additional pumping capacity before TerraTek's scheduled relocation to another facility, thus the program was delayed further to accommodate the full testing program.« less

The impact of an integrated population health enhancement and disease management program on employee health risk, health conditions, and productivity.

PubMed

Loeppke, Ron; Nicholson, Sean; Taitel, Michael; Sweeney, Matthew; Haufle, Vince; Kessler, Ronald C

2008-12-01

This study evaluated the impact of an integrated population health enhancement program on employee health risks, health conditions, and productivity. Specifically, we analyzed changes in these measures among a cohort of 543 employees who completed a health risk assessment in both 2003 and 2005. We compared these findings with 2 different sets of employees who were not offered health enhancement programming. We found that the DIRECTV cohort showed a significant reduction in health risks after exposure to the program. Relative to a matched comparison group, the proportion of low-risk employees at DIRECTV in 2005 was 8.2 percentage points higher; the proportion of medium-risk employees was 7.1 percentage points lower; and the proportion of high-risk employees was 1.1 percentage points lower (p < 0.001). The most noticeable changes in health risk were a reduction in the proportion of employees with high cholesterol; an improvement in diet; a reduction of heavy drinking; management of high blood pressure; improved stress management; increased exercise; fewer smokers; and a drop in obesity rates. We also found that a majority of employees who improved their risk levels from 2003 to 2005 maintained their gains in 2006. Employees who improved their risks levels also demonstrated relative improvement in absenteeism. Overall, this study provides additional evidence that integrated population health enhancement positively impacts employees' health risk and productivity; it also reinforces the view that "good health is good business."

Increase Productivity with Volunteers.

ERIC Educational Resources Information Center

Gray, Sandra T.

1984-01-01

The advantages of volunteer programs including school business partnerships are described, among which are cutting costs, improving productivity, increasing student achievement, and expanding community support. Hints for successful implementation are offered. (MJL)

Design Control Systems of Human Machine Interface in the NTVS-2894 Seat Grinder Machine to Increase the Productivity

NASA Astrophysics Data System (ADS)

Ardi, S.; Ardyansyah, D.

2018-02-01

In the Manufacturing of automotive spare parts, increased sales of vehicles is resulted in increased demand for production of engine valve of the customer. To meet customer demand, we carry out improvement and overhaul of the NTVS-2894 seat grinder machine on a machining line. NTVS-2894 seat grinder machine has been decreased machine productivity, the amount of trouble, and the amount of downtime. To overcome these problems on overhaul the NTVS-2984 seat grinder machine include mechanical and programs, is to do the design and manufacture of HMI (Human Machine Interface) GP-4501T program. Because of the time prior to the overhaul, NTVS-2894 seat grinder machine does not have a backup HMI (Human Machine Interface) program. The goal of the design and manufacture in this program is to improve the achievement of production, and allows an operator to operate beside it easier to troubleshoot the NTVS-2894 seat grinder machine thereby reducing downtime on the NTVS-2894 seat grinder machine. The results after the design are HMI program successfully made it back, machine productivity increased by 34.8%, the amount of trouble, and downtime decreased 40% decrease from 3,160 minutes to 1,700 minutes. The implication of our design, it could facilitate the operator in operating machine and the technician easer to maintain and do the troubleshooting the machine problems.

Increased wood-fiber production: technology, economics, and ecology

Treesearch

William R. Bentley

1973-01-01

Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

An evaluation of the Well at Dell health management program: health risk change and financial return on investment.

PubMed

Musich, Shirley; McCalister, Tre'; Wang, Sara; Hawkins, Kevin

2015-01-01

To investigate the effectiveness of the Well at Dell comprehensive health management program in delivering health care and productivity cost savings relative to program investment (i.e., return on investment). A quasi-experimental design was used to quantify the financial impact of the program and nonexperimental pre-post design to evaluate change in health risks. Ongoing worksite health management program implemented across multiple U.S. locations. Subjects were 24,651 employees with continuous medical enrollment in 2010-2011 who were eligible for 2011 health management programming. Incentive-driven, outcomes-based multicomponent corporate health management program including health risk appraisal (HRA)/wellness, lifestyle management, and disease management coaching programs. Medical, pharmacy, and short-term disability pre/post expenditure trends adjusted for demographics, health status, and baseline costs. Self-reported health risks from repeat HRA completers. Analysis: Propensity score-weighted and multivariate regression-adjusted comparison of baseline to post trends in health care expenditures and productivity costs for program participants and nonparticipants (i.e., difference in difference) relative to programmatic investment. The Well at Dell program achieved an overall return on investment of 2.48 in 2011. Most of the savings were realized from the HRA/wellness component of the program. Cost savings were supported with high participation and significant health risk improvement. An incentive-driven, well-managed comprehensive corporate health management program can continue to achieve significant health improvement while promoting health care and productivity cost savings in an employee population.

Use of humic products for production of berry crops

USDA-ARS?s Scientific Manuscript database

Many berry growers in the United States and elsewhere are incorporating humic acid products into their fertilizer programs. Proclaimed benefits of these substances include improved soil properties and structure, greater bioavailability of soil nutrients, increased microbial populations, and plant ho...

The status of tree improvement programs for northern tree species

Treesearch

David S. Canavera

1977-01-01

Forest tree improvement research and application in the Northeast is reviewed in the perspective of past development and future needs. Control over provenance selection can provide the best quality seed for today's reforestation programs. Future supplies of seed must come from seed orchards if forest land owners are to attain the maximum production per unit area...

The role of genetics and tree improvement in southern forest productivity

Treesearch

Ronald C. Schmidtling; T.L. Robison; S.E. McKeand; R.J. Rousseau; H.L. Allen; B. Goldfarb

2004-01-01

Because of space limitations, a thorough discussion of the rich history of tree improvement in the Southeastern United States cannot be totally accomplished in this forum. However, a synopsis of key program highlights and the people who forged and directed these programs is presented, together with a discussion of current and future work. This discussion covers...

Economic approaches to measuring the significance of food safety in international trade.

PubMed

Caswell, J A

2000-12-20

International trade in food products has expanded rapidly in recent years. This paper presents economic approaches for analyzing the effects on trade in food products of the food safety requirements of governments and private buyers. Important economic incentives for companies to provide improved food safety arise from (1) public incentives such as ex ante requirements for sale of a product with sufficient quality and ex post penalties (liability) for sale of products with deficient quality, and (2) private incentives for producing quality such as internal performance goals (self-regulation) and the external (certification) requirements of buyers. The World Trade Organization's Sanitary Phytosanitary Agreement facilitates scrutiny of the benefits and costs of country-level regulatory programs and encourages regulatory rapprochement on food safety issues. Economists can help guide risk management decisions by providing estimates of the benefits and costs of programs to improve food safety and by analyzing their effect on trade in food products.

CrossTalk: The Journal of Defense Software Engineering. Volume 19, Number 6

DTIC Science & Technology

2006-06-01

improvement methods. The total volume of projects studied now exceeds 12,000. Software Productivity Research, LLC Phone: (877) 570-5459 (973) 273-5829...While performing quality con- sulting, Olson has helped organizations measurably improve quality and productivity , save millions of dollars in costs of...This article draws parallels between the outrageous events on the Jerry Springer Show and problems faced by process improvement programs. by Paul

Failure mode analysis to predict product reliability.

NASA Technical Reports Server (NTRS)

Zemanick, P. P.

1972-01-01

The failure mode analysis (FMA) is described as a design tool to predict and improve product reliability. The objectives of the failure mode analysis are presented as they influence component design, configuration selection, the product test program, the quality assurance plan, and engineering analysis priorities. The detailed mechanics of performing a failure mode analysis are discussed, including one suggested format. Some practical difficulties of implementation are indicated, drawn from experience with preparing FMAs on the nuclear rocket engine program.

Improved health behaviors persist over two years for employees in a worksite wellness program.

PubMed

LeCheminant, James D; Merrill, Ray M

2012-10-01

This study evaluates whether improvements in health behaviors related to a worksite wellness program persist through 2 years. The program was designed to build behavioral capability and self-efficacy by yielding immediately applicable skills and tools and segmenting the behavior change process into weekly, manageable doses. Analyses are based on 267 individuals employed from 2009 through 2011. Significant improvements were observed in the frequency and volume of exercise, and the consumption of vegetables and fruits over 12 and 24 months. Requests for health coaching significantly increased over the study period. Thus, the type of wellness program evaluated in this study produced sustainable health behaviors through 24 months, which likely will translate into future positive health outcomes and improved employee productivity.

Process of Continual Improvement in a School of Nursing.

ERIC Educational Resources Information Center

Norman, Linda D.; Lutenbacher, Melanie

1996-01-01

Vanderbilt University School of Nursing used the Batalden model of systems improvement to change its program. The model analyzes services and products, customers, social community need, and customer knowledge to approach improvements in a systematic way. (JOW)

Prescription for Health Care Costs. Wellness Programs on Campus.

ERIC Educational Resources Information Center

Dunlavey, Christopher S.

1992-01-01

The wellness program is applied within the higher education setting as one means to control health care costs. Discussed are the program's design, objectives, content, facilities, structure and staff, financing, and evaluation. It is noted that wellness programs are not only cost effective but can help to improve morale and increase productivity.…

36 CFR 230.7 - Program practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... soil erosion. (5) Soil and Water Protection and Improvement (SIP5), which includes the maintenance or improvement of water quality and soil productivity on forest land. (6) Riparian and Wetland Protection and...) Forest and Agroforest Improvement (SIP3), which includes the improvement of forest and agroforest stand...

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

Safe patient handling in diagnostic imaging.

PubMed

Murphey, Susan L

2010-01-01

Raising awareness of the risk to diagnostic imaging personnel from manually lifting, transferring, and repositioning patients is critical to improving workplace safety and staff utilization. The aging baby boomer generation and growing bariatric population exacerbate the problem. Also, legislative initiatives are increasing nationwide for hospitals to implement safe patient handling programs. A management process designed to improve working conditions through implementing ergonomic programs can reduce losses and improve productivity and patient care outcome measures for imaging departments.

Comparative Effects of Different Balance-Training-Progression Styles on Postural Control and Ankle Force Production: A Randomized Controlled Trial.

PubMed

Cuğ, Mutlu; Duncan, Ashley; Wikstrom, Erik

2016-02-01

Despite the effectiveness of balance training, the exact parameters needed to maximize the benefits of such programs remain unknown. One such factor is how individuals should progress to higher levels of task difficulty within a balance-training program. Yet no investigators have directly compared different balance-training-progression styles. To compare an error-based progression (ie, advance when proficient at a task) with a repetition-based progression (ie, advance after a set amount of repetitions) style during a balance-training program in healthy individuals. Randomized controlled trial. Research laboratory. A total of 28 (16 women, 12 men) physically healthy young adults (age = 21.57 ± 3.95 years, height = 171.60 ± 11.03 cm, weight = 72.96 ± 16.18 kg, body mass index = 24.53 ± 3.7). All participants completed 12 supervised balance-training sessions over 4 weeks. Each session consisted of a combination of dynamic unstable-surface tasks that incorporated a BOSU ball and lasted about 30 minutes. Static balance from an instrumented force plate, dynamic balance as measured via the Star Excursion Balance Test, and ankle force production in all 4 cardinal planes of motion as measured with a handheld dynamometer before and after the intervention. Selected static postural-control outcomes, dynamic postural control, and ankle force production in all planes of motion improved (P < .05). However, no differences between the progression styles were observed (P > .05) for any of the outcome measures. A 4-week balance-training program consisting of dynamic unstable-surface exercises on a BOSU ball improved dynamic postural control and ankle force production in healthy young adults. These results suggest that an error-based balance-training program is comparable with but not superior to a repetition-based balance-training program in improving postural control and ankle force production in healthy young adults.

Proactive Management of Fermentation and Formulation Interactions to Improve Biocontrol Product Performance

USDA-ARS?s Scientific Manuscript database

The key components of biocontrol product development—discovery, fermentation, and formulation—are interactively linked to each other and ultimately to product performance. To identify biocontrol agents suited for commercial development, our discovery programs utilize a cumulative ranking system tha...

Multiple impacts of an intergenerational program in Japan: Evidence from the Research on Productivity through Intergenerational Sympathy Project.

PubMed

Yasunaga, Masashi; Murayama, Yoh; Takahashi, Tomoya; Ohba, Hiromi; Suzuki, Hiroyuki; Nonaka, Kumiko; Kuraoka, Masataka; Sakurai, Ryota; Nishi, Mariko; Sakuma, Naoko; Kobayashi, Erika; Shinkai, Shoji; Fujiwara, Yoshinori

2016-03-01

Compelling evidence supporting the benefits of social engagement in older adults has been increasingly discussed. However, knowledge regarding an intergenerational program is limited. Herein, we provide a targeted review of intergenerational programs by focusing on our novel interventional program, Research on Productivity through Intergenerational Sympathy. The Research on Productivity through Intergenerational Sympathy program is an intergenerational picture-book reading program launched in 2004. Participants were involved a 3-month intensive weekly training seminar comprising classes about book selection, reading techniques and basic knowledge of children's school life. Subsequently, they participated in group activities that involved playing a hand game, and reading picture books to children at kindergartens, elementary schools and public childcare centers, once every 1-2 weeks. The Research on Productivity through Intergenerational Sympathy program has shown improvement of physical and psychological functioning of older adults and healthy upbringing of children. Similarly, Experience Corps - designed to train and place volunteers in participating elementary schools for an academic year during which time they assist teachers - also showed positive effects for older adults' health status and the psychological/academic success of young children in the USA. Health promotion efforts for older adults must support social policy for the creation of meaningful service programs for older adults on a large social scale. As such, an intergenerational program based on the concept of social capital, defined as "features of social organization, such as trust, norms and networks, that can improve the efficacy of society by facilitating coordinated actions," is an effective and sustainable program for health promotion among older adults. © 2016 Japan Geriatrics Society.

Communicative-Pragmatic Treatment in Schizophrenia: A Pilot Study

PubMed Central

Bosco, Francesca M.; Gabbatore, Ilaria; Gastaldo, Luigi; Sacco, Katiuscia

2016-01-01

This paper aims to verify the efficacy of Cognitive Pragmatic Treatment (CPT), a new remediation training for the improvement of the communicative-pragmatic abilities, in patients with schizophrenia. The CPT program is made up of 20 group sessions, focused on a number of communication modalities, i.e., linguistic, extralinguistic and paralinguistic, theory of mind (ToM) and other cognitive functions able to play a role on the communicative performance, such as awareness and planning. A group of 17 patients with schizophrenia took part in the training program. They were evaluated before and after training, through the equivalent forms of the Assessment Battery for Communication (ABaCo), a tool for testing, both in comprehension and in production, a wide range of pragmatic phenomena such as direct and indirect speech acts, irony and deceit, and a series of neuropsychological and ToM tests. The results showed a significant improvement in patients’ performance on both production and comprehension tasks following the program, and in all the communication modalities evaluated through the ABaCo, i.e., linguistic, extralinguistic, paralinguistic, and social appropriateness. This improvement persisted after 3 months from the end of the training program, as shown by the follow-up tests. These preliminary findings provide evidence of the efficacy of the CPT program in improving communicative-pragmatic abilities in schizophrenic individuals. PMID:26941667

PRN 84-5: Label Improvement Program for Fumigants

EPA Pesticide Factsheets

This notice required registrants of fumigant products to revise the labeling of products registered under FIFRA section 3 or 24(c) to include additional precautionary statements and other statements described in the notice.

The Commercial Vehicle Information Systems and Network program, 2012.

DOT National Transportation Integrated Search

2014-03-01

The Commercial Vehicle Information Systems and : Networks (CVISN) program supports that safety : mission by providing grant funds to States for: : Improving safety and productivity of motor : carriers, commercial motor vehicles : (CMVs), and thei...

The commercial vehicle information systems and networks program, 2013.

DOT National Transportation Integrated Search

2015-04-01

The Commercial Vehicle Information Systems and Networks (CVISN) grant program supports the Federal Motor Carrier Safety Administrations (FMCSAs) safety mission by providing grant funds to States to: : Improve safety and productivity of moto...

A case study of population health improvement at a Midwest regional hospital employer.

PubMed

Long, D Adam; Sheehan, Paula

2010-06-01

This article reviews the population health improvement initiative of a Midwest regional hospital employer. Services included health risk assessments, health education, and motivational health coaching conducted telephonically. Outcomes categories for this program evaluation comprised participation rates, participant satisfaction, health status and behavior change, productivity change, health care claims savings, and return on investment. Participation rates varied widely with incentive structure, although retention of participants in coaching programs averaged 89%. The participant satisfaction rate for the last 14 months of interventions was 96%. Four years of population health status and behavior trending showed significant improvements in smoking status, dietary fat and fiber intake, exercise, mental health (ie, stress, effects depressive symptoms in the past year, life satisfaction), readiness to change (ie, diet, exercise, stress, smoking, body weight), perceptions of overall health, an index of good health habits, sum of lifestyle health risks, and sum of risks and chronic conditions. Body mass index showed nonsignificant improvements during the years of greatest participation (years 2 to 4). Indicators of productivity demonstrated improvements as well. These gains were noted for employees across all health risk statuses, which suggests population health improvement strategies can influence productivity even for healthy employees. Program year 3 was evaluated for health care claims savings using a 2-stage multivariate regression approach. Stage 1 was a computation of propensity-to-participate scores. Stage 2 was an estimation of per member per month (PMPM) claims savings for participant cohorts using a propensity score-weighted linear regression analysis. Participants averaged $40.65 PMPM savings over the control population. Program return on investment, including incentive costs and vendor fees, was 2.87:1.

Exploring Productivity Outcomes from a Brief Intervention for At-Risk Drinking in an Employee Assistance Program

PubMed Central

Osilla, Karen Chan; Cruz, Erin dela; Miles, Jeremy N.V.; Zellmer, Steven; Watkins, Katherine; Larimer, Mary E.; Marlatt, G. Alan

2009-01-01

Brief intervention (BI) research has traditionally examined alcohol and drug use outcomes; however it is unknown whether BIs can also impact on-the-job productivity. This exploratory study examines changes in workplace productivity and related costs for clients receiving a BI for at-risk drinking in the employee assistance program (EAP). Participants were 44 clients attending the EAP for behavioral health concerns, screened for at-risk drinking, assigned to BI+Usual Care (n=25) or UC alone (n=19), and who completed 3-month follow-up. Absenteeism, presenteeism, and productivity costs were derived as outcomes. At follow-up, participants in the BI+UC group had improved productivity when at work (presenteeism) compared to the UC group. The estimated cost savings from improved productivity for the BI+UC group was $1200 per client over the UC group. Groups did not differ by absenteeism (missed days of work). Preliminary evidence suggests the broad impact BIs may have. Implications for future BI research are discussed. PMID:19897312

Evolving Improvements to TRMM Ground Validation Rainfall Estimates

NASA Technical Reports Server (NTRS)

Robinson, M.; Kulie, M. S.; Marks, D. A.; Wolff, D. B.; Ferrier, B. S.; Amitai, E.; Silberstein, D. S.; Fisher, B. L.; Wang, J.; Einaudi, Franco (Technical Monitor)

2000-01-01

The primary function of the TRMM Ground Validation (GV) Program is to create GV rainfall products that provide basic validation of satellite-derived precipitation measurements for select primary sites. Since the successful 1997 launch of the TRMM satellite, GV rainfall estimates have demonstrated systematic improvements directly related to improved radar and rain gauge data, modified science techniques, and software revisions. Improved rainfall estimates have resulted in higher quality GV rainfall products and subsequently, much improved evaluation products for the satellite-based precipitation estimates from TRMM. This presentation will demonstrate how TRMM GV rainfall products created in a semi-automated, operational environment have evolved and improved through successive generations. Monthly rainfall maps and rainfall accumulation statistics for each primary site will be presented for each stage of GV product development. Contributions from individual product modifications involving radar reflectivity (Ze)-rain rate (R) relationship refinements, improvements in rain gauge bulk-adjustment and data quality control processes, and improved radar and gauge data will be discussed. Finally, it will be demonstrated that as GV rainfall products have improved, rainfall estimation comparisons between GV and satellite have converged, lending confidence to the satellite-derived precipitation measurements from TRMM.

How effective are tree improvement programs in the 50 states?

Treesearch

Christopher D. Risbrudt; Stephen E. McDonald

1986-01-01

All 50 states were surveyed to determine the extent of their activities in producing genetically improved trees for timber production. Describes the funds expended, the species being improved, and the use of State and Private Forestry funds provided for genetic improvement. Projects future timber volumes attributable to genetic improvement, and estimates benefit cost...

Implementing Welfare-Employment Programs: An Institutional Analysis of the Work Incentive (WIN) Program.

ERIC Educational Resources Information Center

Mitchell, John J.; And Others

Factors that influence the effectiveness of state and local units of the federal Work Incentive (WIN) program were examined to suggest ways to improve the program, which is designed to move recipients of Aid to Families with Dependent Children (AFDC) into productive jobs. Factors studied were organizational, managerial, and service delivery…

A program downloader and other utility software for the DATAC bus monitor unit

NASA Technical Reports Server (NTRS)

Novacki, Stanley M., III

1987-01-01

A set or programs designed to facilitate software testing on the DATAC Bus Monitor is described. By providing a means to simplify program loading, firmware generation, and subsequent testing of programs, the overhead involved in software evaluation is reduced and that time is used more productively in performance, analysis and improvement of current software.

Performance pay improves engagement, progress, and satisfaction in computer-based job skills training of low-income adults

PubMed Central

Koffarnus, Mikhail N.; DeFulio, Anthony; Sigurdsson, Sigurdur O.; Silverman, Kenneth

2018-01-01

Advancing the education of low-income adults could increase employment and income, but adult education programs have not successfully engaged low-income adults. Monetary reinforcement may be effective in promoting progress in adult education. This experiment evaluated the benefits of providing incentives for performance in a job-skills training program for low-income, unemployed adults. Participants worked on Typing and Keypad programs for 7 months. Participants randomly assigned to Group A (n=23) earned hourly and productivity pay on the Typing program (Productivity Pay), but earned only equalized hourly pay on the Keypad program (Hourly Pay). Group B (n=19) participants had the opposite contingencies. Participants worked more on, advanced further on, and preferred their productivity pay program. These results show that monetary incentives can increase performance in a job-skills training program, and indicate that payment in adult education programs should be delivered contingent on performance in the training program instead of simply on attendance. PMID:24114155

Performance pay improves engagement, progress, and satisfaction in computer-based job skills training of low-income adults.

PubMed

Koffarnus, Mikhail N; DeFulio, Anthony; Sigurdsson, Sigurdur O; Silverman, Kenneth

2013-01-01

Advancing the education of low-income adults could increase employment and income, but adult education programs have not successfully engaged low-income adults. Monetary reinforcement may be effective in promoting progress in adult education. This experiment evaluated the benefits of providing incentives for performance in a job-skills training program for low-income, unemployed adults. Participants worked on typing and keypad programs for 7 months. Participants randomly assigned to Group A (n = 23) earned hourly and productivity pay on the typing program (productivity pay), but earned only equalized hourly pay on the keypad program (hourly pay). Group B (n = 19) participants had the opposite contingencies. Participants worked more on, advanced further on, and preferred their productivity pay program. These results show that monetary incentives can increase performance in a job-skills training program, and indicate that payment in adult education programs should be delivered contingent on performance in the training program instead of simply on attendance. © Society for the Experimental Analysis of Behavior.

The Air Force Manufacturing Technology (MANTECH): Technology transfer methodology as exemplified by the radar transmit/receive module program

NASA Technical Reports Server (NTRS)

Houpt, Tracy; Ridgely, Margaret

1991-01-01

The Air Force Manufacturing Technology program is involved with the improvement of radar transmit/receive modules for use in active phased array radars for advanced fighter aircraft. Improvements in all areas of manufacture and test of these modules resulting in order of magnitude improvements in the cost of and the rate of production are addressed, as well as the ongoing transfer of this technology to the Navy.

Validation of a Poison Prevention Program.

ERIC Educational Resources Information Center

Gill, Noel C.; Braden, Barbara T.

Two way analyses of variance and cross-group descriptive comparisons assessed the effectiveness of the Siop Poison Prevention Program, which included an educational program and the use of warning labels, on improving verbal and visual discrimination of poisonous and nonpoisonous products for preschool children. The study sample consisted of 156…

Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

NASA Technical Reports Server (NTRS)

Jamar, L. G.

1986-01-01

Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

Road weather management program performance metrics : implementation and assessment.

DOT National Transportation Integrated Search

2009-08-31

Since the late 1990s, the U.S. Department of Transportation (USDOT), Federal Highway Administration (FHWA) has managed a program dedicated to improving the safety, mobility and productivity of the nations surface transportation modes by integra...

ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM; BAGHOUSE FILTRATION PRODUCTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

The direct liquefaction proof of concept program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstratingmore » optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.« less

Wheat forecast economics effect study. [value of improved information on crop inventories, production, imports and exports

NASA Technical Reports Server (NTRS)

Mehra, R. K.; Rouhani, R.; Jones, S.; Schick, I.

1980-01-01

A model to assess the value of improved information regarding the inventories, productions, exports, and imports of crop on a worldwide basis is discussed. A previously proposed model is interpreted in a stochastic control setting and the underlying assumptions of the model are revealed. In solving the stochastic optimization problem, the Markov programming approach is much more powerful and exact as compared to the dynamic programming-simulation approach of the original model. The convergence of a dual variable Markov programming algorithm is shown to be fast and efficient. A computer program for the general model of multicountry-multiperiod is developed. As an example, the case of one country-two periods is treated and the results are presented in detail. A comparison with the original model results reveals certain interesting aspects of the algorithms and the dependence of the value of information on the incremental cost function.

50 CFR 679.27 - Improved Retention/Improved Utilization Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... IR/IU species is prohibited all fish of that species brought on board the vessel up to the MRA for... equivalent of primary products on board equals the MRA for that species. (C) Retention of an IR/IU species is... MRA for that species. (C) Retention of an IR/IU species is prohibited no fish or product of that...

50 CFR 679.27 - Improved Retention/Improved Utilization Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... IR/IU species is prohibited all fish of that species brought on board the vessel up to the MRA for... equivalent of primary products on board equals the MRA for that species. (C) Retention of an IR/IU species is... MRA for that species. (C) Retention of an IR/IU species is prohibited no fish or product of that...

50 CFR 679.27 - Improved Retention/Improved Utilization Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... IR/IU species is prohibited all fish of that species brought on board the vessel up to the MRA for... equivalent of primary products on board equals the MRA for that species. (C) Retention of an IR/IU species is... MRA for that species. (C) Retention of an IR/IU species is prohibited no fish or product of that...

Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitzman, D.O.; Stepp, A.K.; Dennis, D.M.

This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents.

Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitzman, D.O.; stepp, A.K.; Dennis, D.M.

This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents.

Programmed iron oxide nanoparticles disintegration in anaerobic digesters boosts biogas production.

PubMed

Casals, Eudald; Barrena, Raquel; García, Ana; González, Edgar; Delgado, Lucía; Busquets-Fité, Martí; Font, Xavier; Arbiol, Jordi; Glatzel, Pieter; Kvashnina, Kristina; Sánchez, Antoni; Puntes, Víctor

2014-07-23

A novel concept of dosing iron ions using Fe3O4 engineered nanoparticles is used to improve biogas production in anaerobic digestion processes. Since small nanoparticles are unstable, they can be designed to provide ions in a controlled manner, and the highest ever reported improvement of biogas production is obtained. The nanoparticles evolution during operation is followed by an array of spectroscopic techniques. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Software For Integer Programming

NASA Technical Reports Server (NTRS)

Fogle, F. R.

1992-01-01

Improved Exploratory Search Technique for Pure Integer Linear Programming Problems (IESIP) program optimizes objective function of variables subject to confining functions or constraints, using discrete optimization or integer programming. Enables rapid solution of problems up to 10 variables in size. Integer programming required for accuracy in modeling systems containing small number of components, distribution of goods, scheduling operations on machine tools, and scheduling production in general. Written in Borland's TURBO Pascal.

Mobil Solar Energy Corporation thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-06-01

Mobil Solar Energy Corporation manufactures photovoltaic modules based on its unique Edge-defined Film-fed Growth (EFG) process for producing octagon-shaped hollow polycrystalline silicon tubes. The octagons are cut by lasers into 100 mm x 100 mm wafers which are suitable for solar cell processing. This process avoids slicing, grinding and polishing operations which are wasteful of material and are typical of most other wafer production methods. EFG wafers are fabricated into solar cells and modules using processes that have been specially developed to allow scaling up to high throughput rates. The goals of the Photovoltaic Manufacturing Technology Initiative (PVMaT) program at Mobil Solar were to improve the EFG manufacturing line through technology advances that accelerate cost reduction in production and stimulate market growth for its product. The program was structured into three main tasks: to decrease silicon utilization by lowering wafer thickness from 400 to 200 (mu)m; to enhance laser cutting yields and throughput while improving the wafer strength; and to raise crystal growth productivity and yield. The technical problems faced and the advances made in the Mobil Solar PVMaT program are described. The author concludes with a presentation of the results of a detailed cost model for EFT module production. This model describes the accelerated reductions in manufacturing costs which are already in place and the future benefits anticipated to result from the technical achievements of the PVMaT program.

Advanced Industrial Materials (AIM) program. Annual progress report. FY 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% ofmore » industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 or 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.` Though AIM remains essentially a National Laboratory Program, it is necessary that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains healthy and productive, thanks to the superb investigators and Laboratory Program Managers. Separate abstracts have been indexed into the energy database for articles from this report.« less

TRIENNIAL LACTATION SYMPOSIUM/BOLFA: Late gestation heat stress of dairy cattle programs dam and daughter milk production.

PubMed

Dahl, G E; Tao, S; Laporta, J

2017-12-01

Anticipated increases in the world population to 9 billion people will lead to increased demand for food. Dairy products represent one of the most sustainable animal sources of food protein because ruminants can utilize byproduct and forage feeds unsuitable for human consumption. Continued improvements in productivity will depend on deeper understanding of the biology of lactation, including developmental programming of tissues critical to that process. Although prenatal programming of postnatal phenotype is well documented for growth, behavior, and disease, there may also be instances of "programming" that last for a specific physiological stage (e.g., lactation). We distinguish between these 2 terms by the use of developmental programming to describe a permanent effect, whereas the more general term is used to describe nonpermanent impacts on the mammary gland. Despite this complexity, here we review the evidence that exposure to elevated temperature and humidity during late gestation can program reduced yields in the subsequent lactation, largely through effects at the mammary gland. Furthermore, we provide emerging evidence that adult capacity for milk synthesis can be programmed in the calf that dam is carrying by events during fetal life occurring 2 yr before. Specifically, calves born to dams that are heat stressed for the final 6 wk of gestation produce 19% less milk in lactation relative to calves from dams provided with evaporative cooling. Importantly, the increased milk yield in animals derived from dams under evaporative cooling occurred without a greater decline in BW that accompanies negative energy balance during early lactation. Therefore, the increase in milk production suggests an increase in the efficiency of conversion of feed to milk. These data indicate that a brief period of heat stress late in development reduces the physiological efficiency of the cow in a coordinated manner to result in a substantial decline in productivity. It is likely that this programming effect would be observed across genetic lines and result in poor sustainability of milk production. Milk will continue to be an important source of high-quality, human-edible food and technologies that improve the efficiency of production will be critical to enhance sustainability. These data provide compelling support for the concept that programming impacts on the dam and the developing fetus will play a role in optimizing the efficiency of production.

Coal-oil coprocessing at HTI - development and improvement of the technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stalzer, R.H.; Lee, L.K.; Hu, J.

1995-12-31

Co-Processing refers to the combined processing of coal and petroleum-derived heavy oil feedstocks. The coal feedstocks used are those typically utilized in direct coal liquefaction: bituminous, subbituminous, and lignites. Petroleum-derived oil, is typically a petroleum residuum, containing at least 70 W% material boiling above 525{degrees}C. The combined coal and oil feedstocks are processed simultaneously with the dual objective of liquefying the coal and upgrading the petroleum-derived residuum to lower boiling (<525{degrees}C) premium products. HTI`s investigation of the Co-Processing technology has included work performed in laboratory, bench and PDU scale operations. The concept of co-processing technology is quite simple and amore » natural outgrowth of the work done with direct coal liquefaction. A 36 month program to evaluate new process concepts in coal-oil coprocessing at the bench-scale was begun in September 1994 and runs until September 1997. Included in this continuous bench-scale program are provisions to examine new improvements in areas such as: interstage product separation, feedstock concentrations (coal/oil), improved supported/dispersed catalysts, optimization of reactor temperature sequencing, and in-line hydrotreating. This does not preclude other ideas from DOE contracts and other sources that can lead to improved product quality and economics. This research work has led to important findings which significantly increased liquid yields, improved product quality, and improved process economics.« less

Relative value unit-based compensation incentivization in an academic vascular practice improves productivity with no early adverse impact on quality.

PubMed

Awad, Nadia; Caputo, Francis J; Carpenter, Jeffrey P; Alexander, James B; Trani, José L; Lombardi, Joseph V

2017-02-01

Given the increased pressure from governmental programs to restructure reimbursements to reflect quality metrics achieved by physicians, review of current reimbursement schemes is necessary to ensure sustainability of the physician's performance while maintaining and ultimately improving patient outcomes. This study reviewed the impact of reimbursement incentives on evidence-based care outcomes within a vascular surgical program at an academic tertiary care center. Data for patients with a confirmed 30-day follow-up for the vascular surgery subset of our institution's National Surgical Quality Improvement Program submission for the years 2013 and 2014 were reviewed. The outcomes reviewed included 30-day mortality, readmission, unplanned returns to the operating room, and all major morbidities. A comparison of both total charges and work relative value units (RVUs) generated was performed before and after changes were made from a salary-based to a productivity-based compensation model. P value analysis was used to determine if there were any statistically significant differences in patient outcomes between the two study years. No statistically significant difference in outcomes of the core measures studied was identified between the two periods. There was a trend toward a lower incidence of respiratory complications, largely driven by a lower incidence in pneumonia between 2013 and 2014. The vascular division had a net increase of 8.2% in total charges and 5.7% in work RVUs after the RVU-based incentivization program was instituted. Revenue-improving measures can improve sustainability of a vascular program without negatively affecting patient care as evidenced by the lack of difference in evidence-based core outcome measures in our study period. Further studies are needed to elucidate the long-term effects of incentivization programs on both patient care and program viability. Copyright © 2016. Published by Elsevier Inc.

Status report on CIP/CUP progress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larkin, W.J.

1975-01-01

Work on the Cascade Improvement Program (CIP) and the Cascade Uprating Program (CUP) continues basically on schedule. When completed the productive capability of the gaseous diffusion facilities at Paducah, Oak Ridge, and Portsmouth will be increased by 60 percent. (JGB)

Advanced Industrial Materials Program

NASA Astrophysics Data System (ADS)

Stooksbury, F.

1994-06-01

The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

Improving designer productivity

NASA Technical Reports Server (NTRS)

Hill, Gary C.

1992-01-01

Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting those challenges.

Time management strategies for research productivity.

PubMed

Chase, Jo-Ana D; Topp, Robert; Smith, Carol E; Cohen, Marlene Z; Fahrenwald, Nancy; Zerwic, Julie J; Benefield, Lazelle E; Anderson, Cindy M; Conn, Vicki S

2013-02-01

Researchers function in a complex environment and carry multiple role responsibilities. This environment is prone to various distractions that can derail productivity and decrease efficiency. Effective time management allows researchers to maintain focus on their work, contributing to research productivity. Thus, improving time management skills is essential to developing and sustaining a successful program of research. This article presents time management strategies addressing behaviors surrounding time assessment, planning, and monitoring. Herein, the Western Journal of Nursing Research editorial board recommends strategies to enhance time management, including setting realistic goals, prioritizing, and optimizing planning. Involving a team, problem-solving barriers, and early management of potential distractions can facilitate maintaining focus on a research program. Continually evaluating the effectiveness of time management strategies allows researchers to identify areas of improvement and recognize progress.

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

GENXICC2.1: An improved version of GENXICC for hadronic production of doubly heavy baryons

NASA Astrophysics Data System (ADS)

Wang, Xian-You; Wu, Xing-Gang

2013-03-01

We present an improved version of GENXICC, which is a generator for hadronic production of the doubly heavy baryons Ξcc, Ξbc and Ξbb and has been introduced by C.H. Chang, J.X. Wang and X.G. Wu [Comput. Phys. Commun. 177 (2007) 467; Comput. Phys. Commun. 181 (2010) 1144]. In comparison with the previous GENXICC versions, we update the program in order to generate the unweighted baryon events more effectively under various simulation environments, whose distributions are now generated according to the probability proportional to the integrand. One Les Houches Event (LHE) common block has been added to produce a standard LHE data file that contains useful information of the doubly heavy baryon and its accompanying partons. Such LHE data can be conveniently imported into PYTHIA to do further hadronization and decay simulation, especially, the color-flow problem can be solved with PYTHIA8.0. NEW VERSION PROGRAM SUMMARYTitle of program: GENXICC2.1 Program obtained from: CPC Program Library Reference to original program: GENXICC Reference in CPC: Comput. Phys. Commun. 177, 467 (2007); Comput. Phys. Commun. 181, 1144 (2010) Does the new version supersede the old program: No Computer: Any LINUX based on PC with FORTRAN 77 or FORTRAN 90 and GNU C compiler as well Operating systems: LINUX Programming language used: FORTRAN 77/90 Memory required to execute with typical data: About 2.0 MB No. of bytes in distributed program: About 2 MB, including PYTHIA6.4 Distribution format: .tar.gz Nature of physical problem: Hadronic production of doubly heavy baryons Ξcc, Ξbc and Ξbb. Method of solution: The upgraded version with a proper interface to PYTHIA can generate full production and decay events, either weighted or unweighted, conveniently and effectively. Especially, the unweighted events are generated by using an improved hit-and-miss approach. Reasons for new version: Responding to the feedback from users of CMS and LHCb groups at the Large Hadron Collider, and based on the recent improvements of PYTHIA on the color-flow problem, we improve the efficiency for generating the unweighted events, and also improve the color-flow part for further hadronization. Especially, an interface has been added to import the output production events into a suitable form for PYTHIA8.0 simulation, in which the color-flow during the simulation can be correctly set. Typical running time: It depends on which option is chosen to match PYTHIA when generating the full events and also on which mechanism is chosen to generate the events. Typically, for the dominant gluon-gluon fusion mechanism to generate the mixed events via the intermediate diquarks in (cc)[3S1]3¯ and (cc)[1S0]6 states, setting IDWTUP=3 and unwght =.true., it takes 30 min to generate 105 unweighted events on a 2.27 GHz Intel Xeon E5520 processor machine; setting IDWTUP=3 and unwght =.false. or IDWTUP=1 and IGENERATE=0, it only needs 2 min to generate the 105 baryon events (the fastest way, for theoretical purposes only). As a comparison, for previous GENXICC versions, if setting IDWTUP=1 and IGENERATE=1, it takes about 22 hours to generate 1000 unweighted events. Keywords: Event generator; Doubly heavy baryons; Hadronic production. Summary of the changes (improvements): (1) The scheme for generating unweighted events has been improved; (2) One Les Houches Event (LHE) common block has been added to record the standard LHE data in order to be the correct input for PYTHIA8.0 for later simulation; (3) We present the code for connecting GENXICC to PYTHIA8.0, where three color-flows have to be correctly set for later simulation. More specifically, we present the changes together with their detailed explanations in the following:

Cartographic standards to improve maps produced by the Forest Inventory and Analysis program

Treesearch

Charles H. (Hobie) Perry; Mark D. Nelson

2009-01-01

The Forest Service, U.S. Department of Agriculture's Forest Inventory and Analysis (FIA) program is incorporating an increasing number of cartographic products in reports, publications, and presentations. To create greater quality and consistency within the national FIA program, a Geospatial Standards team developed cartographic design standards for FIA map...

Analyzing the greenhouse gas impact potential of smallholder development actions across a global food security program

NASA Astrophysics Data System (ADS)

Grewer, Uwe; Nash, Julie; Gurwick, Noel; Bockel, Louis; Galford, Gillian; Richards, Meryl; Costa Junior, Ciniro; White, Julianna; Pirolli, Gillian; Wollenberg, Eva

2018-04-01

This article analyses the greenhouse gas (GHG) impact potential of improved management practices and technologies for smallholder agriculture promoted under a global food security development program. Under ‘business-as-usual’ development, global studies on the future of agriculture to 2050 project considerable increases in total food production and cultivated area. Conventional cropland intensification and conversion of natural vegetation typically result in increased GHG emissions and loss of carbon stocks. There is a strong need to understand the potential greenhouse gas impacts of agricultural development programs intended to achieve large-scale change, and to identify pathways of smallholder agricultural development that can achieve food security and agricultural production growth without drastic increases in GHG emissions. In an analysis of 134 crop and livestock production systems in 15 countries with reported impacts on 4.8 million ha, improved management practices and technologies by smallholder farmers significantly reduce GHG emission intensity of agricultural production, increase yields and reduce post-harvest losses, while either decreasing or only moderately increasing net GHG emissions per area. Investments in both production and post-harvest stages meaningfully reduced GHG emission intensity, contributing to low emission development. We present average impacts on net GHG emissions per hectare and GHG emission intensity, while not providing detailed statistics of GHG impacts at scale that are associated to additional uncertainties. While reported improvements in smallholder systems effectively reduce future GHG emissions compared to business-as-usual development, these contributions are insufficient to significantly reduce net GHG emission in agriculture beyond current levels, particularly if future agricultural production grows at projected rates.

Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitzman, D.O.; Stepp, A.K.

This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitzman, D.O.; Bailey, S.A.; Stepp, A.K.

This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

A new pathway to product standardization.

PubMed

Whitcomb, J

2000-06-01

As the benefits of product standardization become more evident in improved financial, managerial, and clinical outcomes, tools to make the process easier will be in demand. Once a standardization program is established, e-commerce offers tools to keep it on track.

78 FR 59754 - Notice of Application for Approval of Railroad Safety Program Plan and Product Safety Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... crewmembers or roadway workers. It does so while increasing railroad productivity and significantly improving... the document, if submitted on behalf of an association, business, labor union, etc.). See http://www...

PRN 87-1: Label Improvement Program for Pesticides Applied through Irrigation Systems (Chemigation)

EPA Pesticide Factsheets

This Notice requires registrants of pesticide products registered under FIFRA and applied through irrigation systems to revise the labeling for such products to include additional use directions and other statements described in this Notice.

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are themore » aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.« less

Getting Real Performance Out of Pay-for-Performance

PubMed Central

Nicholson, Sean; Pauly, Mark V; Wu, Anita Ya Jung; Murray, James F; Teutsch, Steven M; Berger, Marc L

2008-01-01

Context Most private and public health insurers are implementing pay-for-performance (P4P) programs in an effort to improve the quality of medical care. This article offers a paradigm for evaluating how P4P programs should be structured and how effective they are likely to be. Methods This article assesses the current comprehensiveness of evidence-based medicine by estimating the percentage of outpatient medical spending for eighteen medical processes recommended by the Institute of Medicine. Findings Three conditions must be in place for outcomes-based P4P programs to improve the quality of care: (1) health insurers must not fully understand what medical processes improve health (i.e., the health production function); (2) providers must know more about the health production function than insurers do; and (3) health insurers must be able to measure a patient's risk-adjusted health. Only two of these conditions currently exist. Payers appear to have incomplete knowledge of the health production function, and providers appear to know more about the health production function than payers do, but accurate methods of adjusting the risk of a patient's health status are still being developed. Conclusions This article concludes that in three general situations, P4P will have a different impact on quality and costs and so should be structured differently. When information about patients’ health and the health production function is incomplete, as is currently the case, P4P payments should be kept small, should be based on outcomes rather than processes, and should target physicians’ practices and health systems. As information improves, P4P incentive payments could be increased, and P4P may become more powerful. Ironically, once information becomes complete, P4P can be replaced entirely by “optimal fee-for-service.” PMID:18798885

Social protection for all ages? Impacts of Ethiopia's Productive Safety Net Program on child nutrition.

PubMed

Porter, Catherine; Goyal, Radhika

2016-06-01

We investigate the impact of a large-scale social protection scheme, the Productive Safety Net Program (PSNP) in Ethiopia, on child nutritional outcomes. Children living in households that receive cash transfers should experience improved child nutrition. However, in the case of the PSNP, which for the majority of participants is a public works program, there are several potential threats to finding effects: first, without conditionality on child inputs, increased household income may not be translated into improved child nutrition. Second, the work requirement may impact on parental time, child time use and calories burned. Third, if there is a critical period for child human capital investment that closes before the age of 5 then children above this age may not see any improvement in medium-term nutritional outcomes, measured here as height-for-age. Using a cohort study that collected data both pre-and post-program implementation in 2002, 2006 and 2009, we exploit several novel aspects of the survey design to find estimates that can deal with non-random program placement. We present both matching and difference-in-differences estimates for the index children, as well as sibling-differences. Our estimates show an important positive medium-term nutritional impact of the program for children aged 5-15 that are comparable in size to Conditional Cash Transfer program impacts for much younger children. We show indicative evidence that the program impact on improved nutrition is associated with improved food security and reduced child working hours. Our robustness checks restrict the comparison group, by including only households who were shortlisted, but never received PSNP, and also exclude those who never received aid, thus identifying impact based on timing alone. We cannot rule out that the nutritional impact of the program is the same for younger and older children. Copyright © 2016 Elsevier Ltd. All rights reserved.

A worksite vegan nutrition program is well-accepted and improves health-related quality of life and work productivity.

PubMed

Katcher, Heather I; Ferdowsian, Hope R; Hoover, Valerie J; Cohen, Joshua L; Barnard, Neal D

2010-01-01

Vegetarian and vegan diets are effective in preventing and treating several chronic diseases. However, their acceptability outside a clinical trial setting has not been extensively studied. The aim of this study was to determine the acceptability of a worksite vegan nutrition program and its effects on health-related quality of life and work productivity. Employees of a major insurance corporation with a body mass index > or =25 kg/m(2) and/or a previous diagnosis of type 2 diabetes received either weekly group instruction on a low-fat vegan diet (n = 68) or received no diet instruction (n = 45) for 22 weeks. The vegan group reported improvements in general health (p = 0.002), physical functioning (p = 0.001), mental health (p = 0.03), vitality (p = 0.004), and overall diet satisfaction (p < 0.001) compared with the control group. The vegan group also reported a decrease in food costs (p = 0.003), and increased difficulty finding foods when eating out (p = 0.04) compared with the control group. The vegan group reported a 40-46% decrease in health-related productivity impairments at work (p = 0.03) and in regular daily activities (p = 0.004). A worksite vegan nutrition program is well-accepted and can be implemented by employers to improve the health, quality of life, and work productivity of employees.

Adapting the Army’s Training and Leader Development Programs for Future Challenges

DTIC Science & Technology

2013-01-01

development information from the insti- tutional domain. • Collective training support products are proposed improvements in the primary prod- ucts...not to argue for a totally centralized approach. Decentralized initiatives are ben- eficial , and training program managers and executors should continue...institution that helps improve policy and decisionmaking through research and analysis. This electronic document was made available from www.rand.org as a

An evaluation of the Participatory Action-Oriented Training (PAOT) program in small enterprises in Vietnam.

PubMed

Nguyen, Toai Phuong; Khai, Ton That

2014-01-01

Participatory Action-Oriented Training (PAOT) has been known as a practical training methodology for improving health and safety at work, particularly for small- and medium-sized enterprises (SMEs). Our hypothesis is that PAOT is a better approach than a traditional local method, and the objective of this study was to evaluate the efficacy of PAOT and to make suggestions for improvement. An intervention was performed for one year at 20 volunteer SMEs. PAOT was applied in 10 factories, and a traditional local method was applied in the other 10 SMEs as a control. Two cross-sectional studies were performed consisting of a questionnaire and environmental measurements. Data were also collected on the number of factory improvements, productivity, worker income, accidents, and health costs. There were significant improvements among the intervention factories in terms of work environment, number of improvements and health costs between the pre- and post- intervention phases. In terms of productivity, significant increases were seen in the civil engineering, metal, garment, and rice mill industries in the intervention group, while the metal casting and, garment industries in the control group also showed significant increase in productivity. The findings support the idea that a PAOT program produces better outcomes in SMEs. It is recommended that a PAOT program be widely applied to SMEs to improve health and safety. A fuller examination could be obtained with more environmental measurements taken over a much longer period of time, together with data on sickness absence and accidents that have been independently validated.

Economic analysis of tree improvement: A status report

Treesearch

George F. Dutrow

1974-01-01

Review of current literature establishes that most authors believe that tree improvement expands production, although some point out drawbacks and alternatives. Both softwood and hardwood improvement programs have been analyzed. The authors used various models, economic assumptions, and standards of measurement, but available data were limited. Future models shouId...

The Development of a Graphical Notation for the Formal Specification of Software

DTIC Science & Technology

1990-12-01

the language. A detailed user survey should be performed after the language implementation is complete to determine the effectiveness of the graphical...productivity. ’Ihere is no better way to improve programmer productivity than to help the programmer to avoid performing the work in the first place. This is...optional prototyping phase is performed ) to develop a computer program (2:40). In 1985, Robert Balzer proposed the program transformation lifecycle

7 CFR 205.205 - Crop rotation practice standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... are applicable to the operation: (a) Maintain or improve soil organic matter content; (b) Provide for... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.205...

7 CFR 205.205 - Crop rotation practice standard.

Code of Federal Regulations, 2013 CFR

2013-01-01

... are applicable to the operation: (a) Maintain or improve soil organic matter content; (b) Provide for... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.205...

7 CFR 205.205 - Crop rotation practice standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... are applicable to the operation: (a) Maintain or improve soil organic matter content; (b) Provide for... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.205...

7 CFR 205.205 - Crop rotation practice standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... are applicable to the operation: (a) Maintain or improve soil organic matter content; (b) Provide for... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.205...

Comparative Effects of Different Balance-Training–Progression Styles on Postural Control and Ankle Force Production: A Randomized Controlled Trial

PubMed Central

Cuğ, Mutlu; Duncan, Ashley; Wikstrom, Erik

2016-01-01

Context:  Despite the effectiveness of balance training, the exact parameters needed to maximize the benefits of such programs remain unknown. One such factor is how individuals should progress to higher levels of task difficulty within a balance-training program. Yet no investigators have directly compared different balance-training–progression styles. Objective:  To compare an error-based progression (ie, advance when proficient at a task) with a repetition-based progression (ie, advance after a set amount of repetitions) style during a balance-training program in healthy individuals. Design:  Randomized controlled trial. Setting:  Research laboratory. Patients or Other Participants:  A total of 28 (16 women, 12 men) physically healthy young adults (age = 21.57 ± 3.95 years, height = 171.60 ± 11.03 cm, weight = 72.96 ± 16.18 kg, body mass index = 24.53 ± 3.7). Intervention(s):  All participants completed 12 supervised balance-training sessions over 4 weeks. Each session consisted of a combination of dynamic unstable-surface tasks that incorporated a BOSU ball and lasted about 30 minutes. Main Outcome Measure(s):  Static balance from an instrumented force plate, dynamic balance as measured via the Star Excursion Balance Test, and ankle force production in all 4 cardinal planes of motion as measured with a handheld dynamometer before and after the intervention. Results:  Selected static postural-control outcomes, dynamic postural control, and ankle force production in all planes of motion improved (P < .05). However, no differences between the progression styles were observed (P > .05) for any of the outcome measures. Conclusions:  A 4-week balance-training program consisting of dynamic unstable-surface exercises on a BOSU ball improved dynamic postural control and ankle force production in healthy young adults. These results suggest that an error-based balance-training program is comparable with but not superior to a repetition-based balance-training program in improving postural control and ankle force production in healthy young adults. PMID:26878257

Impact of a health promotion program on employee health risks and work productivity.

PubMed

Mills, Peter R; Kessler, Ronald C; Cooper, John; Sullivan, Sean

2007-01-01

Evaluate the impact of a multicomponent workplace health promotion program on employee health risks and work productivity. Quasi-experimental 12-month before-after intervention-control study. A multinational corporation headquartered in the United Kingdom. Of 618 employees offered the program, 266 (43%) completed questionnaires before and after the program. A total of 1242 of 2500 (49.7%) of a control population also completed questionnaires 12 months apart. A multicomponent health promotion program incorporating a health risk appraisal questionnaire, access to a tailored health improvement web portal, wellness literature, and seminars and workshops focused upon identified wellness issues. Outcomes were (1) cumulative count of health risk factors and the World Health Organization health and work performance questionnaire measures of (2) workplace absenteeism and (3) work performance. After adjusting for baseline differences, improvements in all three outcomes were significantly greater in the intervention group compared with the control group. Mean excess reductions of 0.45 health risk factors and 0.36 monthly absenteeism days and a mean increase of 0.79 on the work performance scale were observed in the intervention group compared with the control group. The intervention yielded a positive return on investment, even using conservative assumptions about effect size estimation. The results suggest that a well-implemented multicomponent workplace health promotion program can produce sizeable changes in health risks and productivity.

Lessons from NASA Applied Sciences Program: Success Factors in Applying Earth Science in Decision Making

NASA Astrophysics Data System (ADS)

Friedl, L. A.; Cox, L.

2008-12-01

The NASA Applied Sciences Program collaborates with organizations to discover and demonstrate applications of NASA Earth science research and technology to decision making. The desired outcome is for public and private organizations to use NASA Earth science products in innovative applications for sustained, operational uses to enhance their decisions. In addition, the program facilitates the end-user feedback to Earth science to improve products and demands for research. The Program thus serves as a bridge between Earth science research and technology and the applied organizations and end-users with management, policy, and business responsibilities. Since 2002, the Applied Sciences Program has sponsored over 115 applications-oriented projects to apply Earth observations and model products to decision making activities. Projects have spanned numerous topics - agriculture, air quality, water resources, disasters, public health, aviation, etc. The projects have involved government agencies, private companies, universities, non-governmental organizations, and foreign entities in multiple types of teaming arrangements. The paper will examine this set of applications projects and present specific examples of successful use of Earth science in decision making. The paper will discuss scientific, organizational, and management factors that contribute to or impede the integration of the Earth science research in policy and management. The paper will also present new methods the Applied Sciences Program plans to implement to improve linkages between science and end users.

Idea Project Final Report, An Improved Metropolitan Area Transportation System (Imats)

DOT National Transportation Integrated Search

1995-01-20

THIS INVESTIGATION WAS COMPLETED AS PART OF THE ITS-IDEA PROGRAM, WHICH IS ONE OF THREE IDEA PROGRAMS MANAGED BY THE TRANSPORTATION RESEARCH BOARD (TRB) TO FOSTER INNOVATIONS IN SURFACE TRANSPORTATION. IT FOCUSES ON PRODUCTS AND RESULTS FOR THE DEVEL...

Employee Involvement, Attitudes, and Productivity in High Technology Manufacturing: A Two-Year, Experimental Study.

ERIC Educational Resources Information Center

Stinnett, William D.; And Others

To investigate methods of improving both employees' productivity and the quality of their work life, workers from four businesses were surveyed before and after their organizations implemented a total employees involvement program. Survey questions covered employees' perceptions of (1) the quality of the product produced, (2) the leadership's…

Price Estimation Guidelines

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.; Aster, R. W.; Firnett, P. J.; Miller, M. A.

1985-01-01

Improved Price Estimation Guidelines, IPEG4, program provides comparatively simple, yet relatively accurate estimate of price of manufactured product. IPEG4 processes user supplied input data to determine estimate of price per unit of production. Input data include equipment cost, space required, labor cost, materials and supplies cost, utility expenses, and production volume on industry wide or process wide basis.

Crop improvement in the era of climate change: an integrated, multi-disciplinary approach for common bean (Phaseolus vulgaris L.)

USDA-ARS?s Scientific Manuscript database

Two forces are converging that will jointly challenge researchers to design programs that ensure our crop production systems meet the world’s food demand. Climate change will potentially reduce productivity while a global population increase will require more food. If productivity is not increased...

Telephone-administered cognitive-behavioral therapy for clients with depressive symptoms in an employee assistance program: a pilot study.

PubMed

Lam, Raymond W; Lutz, Kevin; Preece, Melady; Cayley, Paula M; Bowen Walker, Anne

2011-02-01

To assess the clinical and work productivity effects of a brief intervention using telephone-administered cognitive-behavioral therapy (CBT) for clients with depressive symptoms attending an employee assistance program (EAP). Self-referred clients attending the PPC Canada EAP with clinically relevant depressive symptoms at initial assessment were offered an 8-session telephone-administered CBT program. Outcomes before and after intervention were assessed with the 9-item Personal Health Questionnaire (PHQ-9), Global Assessment of Functioning (GAF), and clinician ratings of work absence and performance impairment. Fifty clients were referred to the pilot program; 39 participated and 31 completed the telephone CBT program. Among program participants, there was significant improvement in PHQ-9 and GAF scores. There was also a significant reduction in performance impairment but not work absence. Anecdotal reports indicated high satisfaction ratings among participants. The results of this pilot study, although limited by the absence of a comparison or control group, suggest that a brief telephone-administered CBT program can improve depressive symptomatology, work productivity, and general function in depressed clients attending an EAP. Further controlled studies are needed to confirm these preliminary findings.

Exploring productivity outcomes from a brief intervention for at-risk drinking in an employee assistance program.

PubMed

Osilla, Karen Chan; dela Cruz, Erin; Miles, Jeremy N V; Zellmer, Steven; Watkins, Katherine; Larimer, Mary E; Marlatt, G Alan

2010-03-01

Brief intervention (BI) research has traditionally examined alcohol and drug use outcomes; however it is unknown whether BIs can also impact on-the-job productivity. This exploratory study examines changes in workplace productivity and related costs for clients receiving a BI for at-risk drinking in the employee assistance program (EAP). Participants were 44 clients attending the EAP for behavioral health concerns, screened for at-risk drinking, assigned to BI+Usual Care (n=25) or UC alone (n=19), and who completed 3-month follow-up. Absenteeism, presenteeism, and productivity costs were derived as outcomes. At follow-up, participants in the BI+UC group had improved productivity when at work (presenteeism) compared to the UC group. The estimated cost savings from improved productivity for the BI+UC group was $1200 per client over the UC group. Groups did not differ by absenteeism (missed days of work). Preliminary evidence suggests the broad impact BIs may have. Implications for future BI research are discussed. Copyright 2009 Elsevier Ltd. All rights reserved.

Productivity improvement in engineering at Rocketdyne

NASA Technical Reports Server (NTRS)

Nordlund, R. M.; Vogt, S. T.; Woo, A. K.

1985-01-01

The Rocketdyne Division of Rockwell International has embarked on a productivity improvement program in engineering. This effort included participation in the White Collar Productivity Improvement (WCPI) project sponsored by the American Productivity Center. A number of things have been learned through this project. It seems that any productivity improvement project should be employee driven. The Rocketdyne project was essentially started as a result of a grassroots effort to remove some particular hindrances, and employee enthusiasm was a prime factor in the continuing progress of the effort. A significant result was that awareness of problems at all levels increased. Many issues surfaced in the diagnostic phase, and were then noted and discussed. This process added legitimacy to issues that had previously been merely unspoken concerns. The initial feelings of many members of the pilot group was that significant changes would occur relatively quickly. It is now recognized that this will have to be an ongoing, long-term effort.

The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorrell, C.A.

1997-04-01

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80%more » of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`« less

A High School Program in Human Ecology: Helping Everyone Live Productively. Student Handbook.

ERIC Educational Resources Information Center

Brandywine School District, Claymont, DE.

The program's goal is to provide high school students an opportunity to become an active force in the advancement of the human condition and to develop positive attitudes to improve their effectiveness in dealing with their environment. The student handbook consists of eight chapters, including an introduction to the program in chapter I. Chapter…

Read Naturally [R]. What Works Clearinghouse Intervention Report. Updated

ERIC Educational Resources Information Center

What Works Clearinghouse, 2013

2013-01-01

The “Read Naturally[R]” program is a supplemental reading program that aims to improve reading fluency, accuracy, and comprehension of elementary and middle school students using a combination of texts, audio CDs, and computer software. The program uses one of four products that share a common fluency-building strategy: “Read Naturally[R] Masters…

75 FR 47307 - Center for Devices and Radiological Health 510(k) Working Group Preliminary Report and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... 510(k) program optimally achieves these goals. In September 2009, CDRH convened an internal 510(k...) program and explore actions CDRH could take to strengthen the program and improve the consistency of its... CDRH uses science to guide its regulatory decision making across the total product life cycle of...

A Programming Environment Evaluation Methodology for Object-Oriented Systems. Ph.D Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1987-01-01

The object-oriented design strategy as both a problem decomposition and system development paradigm has made impressive inroads into the various areas of the computing sciences. Substantial development productivity improvements have been demonstrated in areas ranging from artificial intelligence to user interface design. However, there has been very little progress in the formal characterization of these productivity improvements and in the identification of the underlying cognitive mechanisms. The development and validation of models and metrics of this sort require large amounts of systematically-gathered structural and productivity data. There has, however, been a notable lack of systematically-gathered information on these development environments. A large part of this problem is attributable to the lack of a systematic programming environment evaluation methodology that is appropriate to the evaluation of object-oriented systems.

The impact of a prospective survey-based workplace intervention program on employee health, biologic stress markers, and organizational productivity.

PubMed

Anderzén, Ingrid; Arnetz, Bengt B

2005-07-01

To study whether knowledge about psychosocial work indicators and a structured method to implement changes based on such knowledge comprise an effective management tool for enhancing organizational as well as employee health and well-being. White- collar employees representing 22 different work units were assessed before and after a 1-year intervention program. Subjective ratings on health and work environment, biologic markers, absenteeism, and productivity were measured. Significant improvements in performance feedback, participatory management, employeeship, skills development, efficiency, leadership, employee well-being, and work-related exhaustion were identified. The restorative hormone testosterone increased during the intervention and changes correlated with increased overall organizational well-being. Absenteeism decreased and productivity improved. Fact-based psychosocial workplace interventions are suggested to be an important process for enhancing employee well-being as well as organizational performance.

Practical strategies of black walnut genetic improvement—an update

Treesearch

George Rink; J.W. Van Sambeek; Phil O' Connor; Mark Coggeshall

2017-01-01

The ultimate goal of any tree improvement program is the large-scale production and distribution of genetically improved seedlings. In black walnut, projections based on earlier research indicate that genetically improved seedlings could provide growth improvement of between 15 to 25 percent by using seed or seedlings of the proper geographic origin (Bey 1980; Clausen...

Improving designer productivity. [artificial intelligence

NASA Technical Reports Server (NTRS)

Hill, Gary C.

1992-01-01

Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting these challenges.

Development of interactive hypermedia software for high school biology: A research and development study

NASA Astrophysics Data System (ADS)

Alturki, Uthman T.

The goal of this research was to research, design, and develop a hypertext program for students who study biology. The Ecology Hypertext Program was developed using Research and Development (R&D) methodology. The purpose of this study was to place the final "product", a CD-ROM for learning biology concepts, in the hands of teachers and students to help them in learning and teaching process. The product was created through a cycle of literature review, needs assessment, development, and a cycle of field tests and revisions. I applied the ten steps of R&D process suggested by Borg and Gall (1989) which, consisted of: (1) Literature review, (2) Needs assessment, (3) Planning, (4) Develop preliminary product, (5) Preliminary field-testing, (6) Preliminary revision, (7) Main field-testing, (8) Main revision, (9) Final field-testing, and (10) Final product revision. The literature review and needs assessment provided a support and foundation for designing the preliminary product---the Ecology Hypertext Program. Participants in the needs assessment joined a focus group discussion. They were a group of graduate students in education who suggested the importance for designing this product. For the preliminary field test, the participants were a group of high school students studying biology. They were the potential user of the product. They reviewed the preliminary product and then filled out a questionnaire. Their feedback and suggestions were used to develop and improve the product in a step called preliminary revision. The second round of field tasting was the main field test in which the participants joined a focus group discussion. They were the same group who participated in needs assessment task. They reviewed the revised product and then provided ideas and suggestions to improve the product. Their feedback were categorized and implemented to develop the product as in the main revision task. Finally, a group of science teachers participated in this study by reviewing the product and then filling out the questionnaire. Their suggestions were used to conduct the final step in R&D methodology, the final product revision. The primary result of this study was the Ecology Hypertext Program. It considered a small attempt to give students an opportunity to learn through an interactive hypertext program. In addition, using the R&D methodology was an ideal procedure for designing and developing new educational products and material.

Research and application of online measurement system of tire tread profile in automobile tire production

NASA Astrophysics Data System (ADS)

Wang, Pengyao; Chen, Xiangguang; Yang, Kai; Liu, Xuejiao

2017-01-01

To improve the measuring efficiency of width and thickness of tire tread in the process of automobile tire production, the actual condition for the tire production process is analyzed, and a fast online measurement system based on moving tire tread of tire specifications is established in this paper. The coordinate data of tire tread profile is acquired by 3D laser sensor, and we use C# language for programming which is an object-oriented programming language to complete the development of client program. The system with laser sensor can provide real-time display of tire tread profile and the data to require in the process of tire production. Experimental results demonstrate that the measuring precision of the system is <= 1mm, it can meet the measurement requirements of the production process, and the system has the characteristics of convenient installation and testing, system stable operation.

Mobil Solar Energy Corporation thin EFG octagons. Final subcontract report, 1 April 1992--31 January 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalejs, J.P.

1994-06-01

Mobil Solar Energy Corporation manufactures photovoltaic modules based on its unique Edge-defined Film-fed Growth (EFG) process for producing octagon-shaped hollow polycrystalline silicon tubes. The octagons are cut by lasers into 100 mm x 100 mm wafers which are suitable for solar cell processing. This process avoids slicing, grinding and polishing operations which are wasteful of material and are typical of most other wafer production methods. EFG wafers are fabricated into solar cells and modules using processes that have been specially developed to allow scaling up to high throughput rates. The goals of the Photovoltaic Manufacturing Technology Initiative (PVMaT) program atmore » Mobil Solar were to improve the EFG manufacturing line through technology advances that accelerate cost reduction in production and stimulate market growth for its product. The program was structured into three main tasks: to decrease silicon utilization by lowering wafer thickness from 400 to 200 {mu}m; to enhance laser cutting yields and throughput while improving the wafer strength; and to raise crystal growth productivity and yield. The technical problems faced and the advances made in the Mobil Solar PVMaT program are described. The author concludes with a presentation of the results of a detailed cost model for EFT module production. This model describes the accelerated reductions in manufacturing costs which are already in place and the future benefits anticipated to result from the technical achievements of the PVMaT program.« less

Advanced Natural Gas Reciprocating Engines(s)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zurlo, James

The ARES program was initiated in 2001 to improve the overall brake thermal efficiency of stationary, natural gas, reciprocating engines. The ARES program is a joint award that is shared by Dresser, Inc., Caterpillar and Cummins. The ARES program was divided into three phases; ARES I (achieve 44% BTE), ARES II (achieve 47% BTE) and ARES III (achieve 50% BTE). Dresser, Inc. completed ARES I in March 2005 which resulted in the commercialization of the APG1000 product line. ARES II activities were completed in September 2010 and the technology developed is currently being integrated into products. ARES III activities beganmore » in October 2010. The ARES program goal is to improve the efficiency of natural gas reciprocating engines. The ARES project is structured in three phases with higher efficiency goals in each phase. The ARES objectives are as follows: 1. Achieve 44% (ARES I), 47% (ARES II), and 50% brake thermal efficiency (BTE) as a final ARES III objective 2. Achieve 0.1 g/bhp-hr NOx emissions (with after-treatment) 3. Reduce the cost of the produced electricity by 10% 4. Improve or maintain reliability, durability and maintenance costs« less

Patient and Nurse Experiences in a Rural Chronic Disease Management Program: A Qualitative Evaluation.

PubMed

Davisson, Erica A; Swanson, Elizabeth A

Rural status confounds chronic disease self-management. The purpose of this qualitative, descriptive study was to evaluate the nurse-led "Living Well" chronic disease management program reporting patient recruitment and retention issues since program initiation in 2013. The Chronic Care Model (CCM) was the guiding framework used to reinforce that interdisciplinary teams must have productive patient interactions for their program(s) to be sustainable. A rural, Midwest county clinic's chronic disease management program. Observations, interviews, and within- and across-case coding were used. Patients' responses were analyzed to identify (1) reasons for recruitment and retention problems and (2) program elements that were viewed as successful or needing improvement. A convenience sample of 6 rural, English-speaking adults (65 years or older, with no severe cognitive impairment) with at least one chronic condition was recruited and interviewed. Themes emerged related to nurse knowledge, availability, and value; peer support; overcoming barriers; adherence enhancement; and family/friends' involvement. Patients reported engagement in self-management activities because of program elements such as support groups and productive nurse-patient interactions. Interdisciplinary communication, commitment, and patient referral processes were identified as reasons for recruitment and retention issues. Findings substantiated that certain elements must be present and improved upon for future rural programs to be successful. Interdisciplinary communication may need to be improved to address recruitment and retention problems. It was clear from patient interviews that the nurse coordinators played a major role in patients' self-management adherence and overall satisfaction with the program. This is important to case management because results revealed the need for programs of this nature that incorporate the vital role of nurse coordinators and align with the CCM value of providing a supportive community health care resource for patients with chronic disease.

75 FR 62692 - Dairy Import Licensing Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... intended to improve program administration and reflect ongoing changes in the markets for cheese and other... the markets for cheese and other dairy products subject to import licensing requirements. The historical licenses provide for orderly importation of a wide variety of cheeses and permit companies to...

Training Innovations for Economic Development

ERIC Educational Resources Information Center

Breeden, Kenneth H.

2002-01-01

This article talks about Certified Manufacturing Specialist (CMS), a Georgia training program that has successfully addressed the needs of both students and partners in business and industry. The program helped business reduce the learning curve for new employees; improved productivity, quality, and safety; reduced material waste; eased the…

Sustained employability of workers in a production environment: design of a stepped wedge trial to evaluate effectiveness and cost-benefit of the POSE program.

PubMed

van Holland, Berry J; de Boer, Michiel R; Brouwer, Sandra; Soer, Remko; Reneman, Michiel F

2012-11-20

Sustained employability and health are generating awareness of employers in an aging and more complex work force. To meet these needs, employers may offer their employees health surveillance programs, to increase opportunities to work on health and sustained employability. However, evidence for these health surveillance programs is lacking. The FLESH study (Functional Labour Evaluation for Sustained Health and employment) was developed to evaluate a comprehensive workers' health promotion program on its effectiveness, cost-benefit, and process of the intervention. The study is designed as a cluster randomised stepped wedge trial with randomisation at company plant level and is carried out in a large meat processing company. Every contracted employee is offered the opportunity to participate in the POSE program (Promotion Of Sustained Employability). The main goals of the POSE program are 1) providing employee's insight into their current employability and health status, 2) offering opportunities to improve employability and decrease health risks and 3) improving employability and health sustainably in order to keep them healthy at work. The program consists of a broad assessment followed by a counselling session and, if needed, a tailored intervention. Measurements will be performed at baseline and will be followed up at 20, 40, 60, 80, 106 and 132 weeks. The primary outcome measures are work ability, productivity and absenteeism. Secondary outcomes include health status, vitality, and psychosocial workload. A cost-benefit study will be conducted from the employers' perspective. A process evaluation will be conducted and the satisfaction of employer and employees with the program will be assessed. This study provides information on the effectiveness of the POSE program on sustained employment. When the program proves to be effective, employees benefit by improved work ability, and health. Employers benefit from healthier employees, reduced sick leave (costs) and higher productivity. The study can expose key elements for a successful implementation and execution of the POSE program and may serve as an example to other companies inside and outside the industry. The trial is registered at the Dutch Trial Register (http://www.trialregister.nl): NTR3445.

Sustained employability of workers in a production environment: design of a stepped wedge trial to evaluate effectiveness and cost-benefit of the POSE program

PubMed Central

2012-01-01

Background Sustained employability and health are generating awareness of employers in an aging and more complex work force. To meet these needs, employers may offer their employees health surveillance programs, to increase opportunities to work on health and sustained employability. However, evidence for these health surveillance programs is lacking. The FLESH study (Functional Labour Evaluation for Sustained Health and employment) was developed to evaluate a comprehensive workers’ health promotion program on its effectiveness, cost-benefit, and process of the intervention. Methods The study is designed as a cluster randomised stepped wedge trial with randomisation at company plant level and is carried out in a large meat processing company. Every contracted employee is offered the opportunity to participate in the POSE program (Promotion Of Sustained Employability). The main goals of the POSE program are 1) providing employee’s insight into their current employability and health status, 2) offering opportunities to improve employability and decrease health risks and 3) improving employability and health sustainably in order to keep them healthy at work. The program consists of a broad assessment followed by a counselling session and, if needed, a tailored intervention. Measurements will be performed at baseline and will be followed up at 20, 40, 60, 80, 106 and 132 weeks. The primary outcome measures are work ability, productivity and absenteeism. Secondary outcomes include health status, vitality, and psychosocial workload. A cost-benefit study will be conducted from the employers’ perspective. A process evaluation will be conducted and the satisfaction of employer and employees with the program will be assessed. Discussion This study provides information on the effectiveness of the POSE program on sustained employment. When the program proves to be effective, employees benefit by improved work ability, and health. Employers benefit from healthier employees, reduced sick leave (costs) and higher productivity. The study can expose key elements for a successful implementation and execution of the POSE program and may serve as an example to other companies inside and outside the industry. Trial registration The trial is registered at the Dutch Trial Register (http://www.trialregister.nl): NTR3445 PMID:23164366

Improved Graphite Fiber.

DTIC Science & Technology

1982-10-01

The purpose of the program was to develop a production method for improved graphite fibers. A goal of 750 x 10 to the 3rd power psi tensile strength...at 60-65 x 10 to the 6th power psi modulus was set for the program. Improved 3-4 micron diameter boron strengthened graphite fibers were successfully... graphite fiber. An average tensile strength of 550 x 10 to the 3rd power psi at the 60 x 10 to the 6th power psi modulus level was achieved through a preliminary optimization of the plant processing conditions.

Space Shuttle main engine product improvement

NASA Technical Reports Server (NTRS)

Lucci, A. D.; Klatt, F. P.

1985-01-01

The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

Healthcare Commercialization Programs: Improving the Efficiency of Translating Healthcare Innovations From Academia Into Practice.

PubMed

Collins, John M; Reizes, Ofer; Dempsey, Michael K

2016-01-01

Academic investigators are generating a plethora of insights and technologies that have the potential to significantly improve patient care. However, to address the imperative to improve the quality, cost and access to care with ever more constrained funding, the efficiency and the consistency with which they are translated into cost effective products and/or services need to improve. Healthcare commercialization programs (HCPs) are described and proposed as an option that institutions can add to their portfolio to improve translational research. In helping teams translate specific healthcare innovations into practice, HCPs expand the skillset of investigators and enhance an institution's innovation capacity. Lessons learned are shared from configuring and delivering HCPs, which build on the fundamentals of the National Science Foundation's Innovation Corps program, to address the unique challenges in supporting healthcare innovations and innovators.

Remote operated vehicle with CO{sub 2} blasting (ROVCO{sub 2}): Volume 1. Final report, September 1993--July 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-06-01

This report documents the second phase of the Remote Operated Vehicle with CO{sub 2} Blasting (ROVCO{sub 2}) Program. The ROVCO{sub 2} Program`s goal is to develop and demonstrate a tool to improve the productivity of concrete floor decontamination. The second phase integrated non-developmental subsystems on to the ROVCO{sub 2} system and performed quantitative decontamination effectiveness, productivity, and reliability testings. The report documents these development activities and the analysis of cost and performance. The results show that the ROVCO{sub 2} system is an efficient decontamination tool.

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-01-01

Mobil Solar Energy Corporation currently practices a unique crystal growth technology for producing crystalline silicon sheet, which is then cut with lasers into wafers. The wafers are processed into solar cells and incorporated into modules for photovoltaic applications. The silicon sheet is produced using a method known as Edge-defined Film-fed growth (EFG), in the form of hollow eight-sided polygons (octagons) with 10 cm faces. These are grown to lengths of 5 meters and thickness of 300 microns, with continuous melt replenishment, in compact furnaces designed to operate at a high sheet area production area of 135 sq cm/min. The present Photovoltaic Manufacturing Technology (PVMaT) three-year program seeks to advance the manufacturing line capabilities of the Mobil Solar crystal growth and cutting technologies. If successful, these advancements will provide significant reductions in already low silicon raw material usage, improve process productivity, laser cutting throughput and yield, and so lower both individual wafer cost and the cost of module production. This report summarizes the significant technical improvements in EFG technology achieved in Phase 1 of this program. Technical results are reported for each of the three main program areas: (1) thin octagon growth (crystal growth) -- to reduce the thickness of the octagon to an interim goal of 250 microns during Phase 1, with an ultimate goal of achieving 200 micron thicknesses; (2) laser cutting -- to improve the laser cutting process, so as to produce wafers with decreased laser cutting damage at increased wafer throughput rates; and (3) process control and product specification -- to implement advanced strategies in crystal growth process control and productivity designed to increase wafer yields.

International School Feeding: USDA's Oversight of the McGovern-Dole Food for Education Program Needs Improvement. Report to Congressional Requesters. GAO-11-544

ERIC Educational Resources Information Center

Melito, Thomas

2011-01-01

The McGovern-Dole International Food for Education and Child Nutrition Program (MGD Program) provides donations of U.S. agricultural products and financial and technical assistance for school feeding programs in the developing world. According to the U.S. Department of Agriculture (USDA), with about $200 million in funding in fiscal year 2010, the…

The effect of disease prevention and health promotion on workplace productivity: a literature review.

PubMed

Riedel, J E; Lynch, W; Baase, C; Hymel, P; Peterson, K W

2001-01-01

This report was prepared by the Center for Disease Prevention and Health Promotion in the Institute for Health and Productivity Management as part of an effort to improve understanding of the connection between employee health and performance and to begin to identify new strategies through which treating health as an investment in human capital can lead to greater business success. Computer database searches of peer-reviewed literature published between 1993 and 1998 and manual reviews of 20 journals were used to identify research on the link between employee health and performance. Data was extracted to summarize the overall findings on the magnitude of health problems addressed by health promotion and disease prevention programs, and the impact of interventions on improving health risk, reducing medical care cost, and improving worker performance. From this summary, major conclusions on early detection of disease, the impact of behavior change programs, and appropriate care-seeking were drawn. This systematic review is supplemented with summaries of 15 seminal articles and descriptions of five leading-practices programs. The influence of developments in work/family issues, complementary and alternative medicine, and quality of care and health outcomes research are briefly discussed. Finally, a conceptual framework for studying the impact of health and productivity is described.

Aerospace technology as a source of new ideas.

NASA Technical Reports Server (NTRS)

Hamilton, J. T.

1972-01-01

It is shown that technological products and processes resulting from aeronautical and space research and development can be a significant source of new product or product improvement ideas. The problems associated with technology transfer are discussed. As an example, the commercialization of NASTRAN, NASA's structural analysis computer program, is discussed. Some other current application projects are also outlined.

National workshop on forest productivity & technology: cooperative research to support a sustainable & competitive future - progress and strategy

Treesearch

Eric D. Vance

2010-01-01

The Agenda 2020 Program is a partnership among government agencies, the forest products industry, and academia to develop technology capable of enhancing forest productivity, sustaining environmental values, increasing energy efficiency, and improving the economic competitiveness of the United States forest sector. In November 2006, the USDA Forest Service, in...

Small Business Programs: Benefits, Barriers, Bridges and Critical Success Factors

DTIC Science & Technology

2009-05-01

Decreased product development time cycles • Product, process and technology innovation • Joint marketing and advertising • Access to new markets or...Increased Joint Marketing and Advertising Yuva (2005) Increased Penetration into New Markets Yuva (2005); Terrill (2007) Improved Forecasting and Response

Evolution of Stored-Product Entomology: Protecting the World Food Supply.

PubMed

Hagstrum, David W; Phillips, Thomas W

2017-01-31

Traditional methods of stored-product pest control were initially passed from generation to generation. Ancient literature and archaeology reveal hermetic sealing, burning sulfur, desiccant dusts, and toxic botanicals as early control methods. Whereas traditional nonchemical methods were subsequently replaced by synthetic chemicals, other traditional methods were improved and integrated with key modern pesticides. Modern stored-product integrated pest management (IPM) makes decisions using knowledge of population dynamics and threshold insect densities. IPM programs are now being fine-tuned to meet regulatory and market standards. Better sampling methods and insights from life histories and ecological studies have been used to optimize the timing of pest management. Over the past 100 years, research on stored-product insects has shifted from being largely concentrated within 10 countries to being distributed across 65 countries. Although the components of IPM programs have been well researched, more research is needed on how these components can be combined to improve effectiveness and assure the security of postharvest food as the human population increases.

Schools Shape Up with Employee Wellness.

ERIC Educational Resources Information Center

Kaldy, Joanne

1985-01-01

Increasingly, schools are beginning employee wellness programs, which encourage employees to make personal commitments to life-style changes that will increase their productivity and generally improve their health. This article provides an introduction to wellness programs, lists advantages, and tells how to start one and make it work. (DCS)

Soil moisture and temperature algorithms and validation

USDA-ARS?s Scientific Manuscript database

Passive microwave remote sensing of soil moisture has matured over the past decade as a result of the Advanced Microwave Scanning Radiometer (AMSR) program of JAXA. This program has resulted in improved algorithms that have been supported by rigorous validation. Access to the products and the valida...

Idea Project Final Report, Vehicle-To-Vehicle Communication For Collision Avoidance And Improved Traffic Flow

DOT National Transportation Integrated Search

1995-05-14

THIS INVESTIGATION WAS COMPLETED AS PART OF THE ITS-IDEA PROGRAM WHICH IS ONE OF THREE IDEA PROGRAMS MANAGED BY THE TRANSPORTATION RESEARCH BOARD (TRB) TO FOSTER INNOVATIONS IN SURFACE TRANSPORTATION. IT FOCUSES ON PRODUCTS AND RESULT FOR THE DEVELOP...

Creating a bridge between data collection and program planning: a technical assistance model to maximize the use of HIV/AIDS surveillance and service utilization data for planning purposes.

PubMed

Logan, Jennifer A; Beatty, Maile; Woliver, Renee; Rubinstein, Eric P; Averbach, Abigail R

2005-12-01

Over time, improvements in HIV/AIDS surveillance and service utilization data have increased their usefulness for planning programs, targeting resources, and otherwise informing HIV/AIDS policy. However, community planning groups, service providers, and health department staff often have difficulty in interpreting and applying the wide array of data now available. We describe the development of the Bridging Model, a technical assistance model for overcoming barriers to the use of data for program planning. Through the use of an iterative feedback loop in the model, HIV/AIDS data products constantly are evolving to better inform the decision-making tasks of their multiple users. Implementation of this model has led to improved data quality and data products and to a greater willingness and ability among stakeholders to use the data for planning purposes.

Facing the PA team growth problem in space programs: The Hermes approach

NASA Astrophysics Data System (ADS)

Bernede, G.

1991-08-01

The increasing need for product assurance (PA) in space programs makes finding skilled and trained engineers willing to work in the PA field a top level difficulty. Few engineers are available and exchanging them from one project to another is not a solution. No reservoir of talent exists for the time being in Europe. Educational efforts have started in several countries to have product assurance techniques become part of basic engineering knowledge. These efforts will bring strong improvement compared to today's situation but not in time for programs such as Hermes. Peculiar solutions must be developed. Approaches used to solve this problem within the Hermes program are outlined.

Perspectives on Evaluation, Linkage and Program Improvement.

ERIC Educational Resources Information Center

Bank, Adrianne; And Others

Actual and potential relationships between evaluators and linkers--curriculum or management specialists who disseminate the products of evaluation to school districts--were explored. Evaluation and linkage evolved as distinct educational occupations, stimulated by federal involvement in research, development, and school improvement since the early…

Comparison of Dijkstra's algorithm and dynamic programming method in finding shortest path for order picker in a warehouse

NASA Astrophysics Data System (ADS)

Nordin, Noraimi Azlin Mohd; Omar, Mohd; Sharif, S. Sarifah Radiah

2017-04-01

Companies are looking forward to improve their productivity within their warehouse operations and distribution centres. In a typical warehouse operation, order picking contributes more than half percentage of the operating costs. Order picking is a benchmark in measuring the performance and productivity improvement of any warehouse management. Solving order picking problem is crucial in reducing response time and waiting time of a customer in receiving his demands. To reduce the response time, proper routing for picking orders is vital. Moreover, in production line, it is vital to always make sure the supplies arrive on time. Hence, a sample routing network will be applied on EP Manufacturing Berhad (EPMB) as a case study. The Dijkstra's algorithm and Dynamic Programming method are applied to find the shortest distance for an order picker in order picking. The results show that the Dynamic programming method is a simple yet competent approach in finding the shortest distance to pick an order that is applicable in a warehouse within a short time period.

EPO Program and Product Evaluation Throughout the Development Lifecycle

NASA Astrophysics Data System (ADS)

Kaiser, C.; Butcher, G. J.

2013-12-01

Evaluation of successful education and public outreach (EPO) programs and products is becoming increasingly important for the continued development of such efforts. This presentation will detail the tools and techniques used to evaluate two EPO efforts- 1) NASA's REEL Science Communications Contest and Video Production Workshop, and 2) the 'Sensors, Circuits, and Satellites' product. A primary challenge with evaluating any EPO product geared towards children and students is the limitation on collecting information from minors. With regards to the REEL Science Contest, over 120 students participated in producing and entering 48 contest entries but because of the Office of Budget and Management (OBM) regulations that restrict collecting feedback from more than nine individuals, we were only able to collect evaluation data from a small subset of this group. The five winning students who participated in the final workshop took part in the evaluation. The benefit of a small group size is that it allowed for more in-depth one-on-one interviews with each student. The feedback collected from this evaluation offered valuable insight into what worked well along with areas of improvement for futures contests and workshops. The REEL Science video contest had another evaluation opportunity since NASA scientists, communications experts, and producers also participated in the program and worked directly with the students. A survey was administered for this audience in an effort to gauge the perceived value and success of the program from the perspective of the originating institution. We found that if a program is well received, the program is more likely to receive future support. Additionally, this component of the program evaluation provided useful feedback and lessons learned to help optimize the role of the internal audience for similar programs in the future. Implementing formative evaluation is key to developing a successful EPO product development. Collecting data at key stages during development allows for modifications and improvements to the product before time and money have been wasted going down the wrong path. Depending on the product and the stage of development, there are several evaluation tools to employ: surveys, observations, expert analysis, heuristic evaluations, feedback forms, diary studies, use case testing and interviews. In the case of developing the 'Sensors, Circuits, and Satellites' product, surveys were collected from teachers and students who participated in the lesson or activity. Audio recordings were also made of the teachers as they completed each activity to collect direct quotes, questions, concerns, and feedback. Facilitators completed feedback forms to capture quotes and observations of the students working through the activities and engaging with the product. All of these data provided valuable insight into the participants' experiences and effectiveness of the product. A complement of tools and techniques is the best approach to evaluating EPO products and programs. These will vary based on application, but can easily be implemented at key points in the development lifecycle to produce feedback and data used to assess and meet EPO goals and objectives.

The Effect of Monitoring: How Data Collection Type and Frequency Boosts Participation and the Adoption of Best Practices in a Coffee Agronomy Training Program in Rwanda.

PubMed

Gathani, Sachin; Gomez, Maria Paula; Sabates, Ricardo; Stoelinga, Dimitri

2015-12-01

The impact of surveying on individuals' behavior and decision making has been widely studied in academic literature on market research but not so much the impact of monitoring on economic development interventions. To estimate whether different monitoring strategies lead to improvement in participation levels and adoption of best practices for coffee production for farmer who participated in TechnoServe Agronomy Training Program in Rwanda. Farmers were identified randomly for monitoring purposes to belong to two different groups and then selected depending on the additional criterion of having productive coffee trees. We estimate treatment-on-the-treated and intention-to-treat effects on training attendance rates and farmers best-practice adoptions using difference-in-differences estimation techniques. Farmers were randomly identified to a high or low monitoring with different type and frequency of data collection and selected if they had productive coffee trees as part of the monitoring strategy. Attendance to training sessions by all farmers in the program and best-practice adoption data for improving coffee yield. We find that monitoring led to surprisingly large increases in farmer participation levels in the project and also improved best-practice adoption rates. We also find that higher frequency of data collection has long-lasting effects and are more pronounced for low-attendance farmers. Monitoring not only provides more data and a better understanding of project dynamics, which in turn can help improve design, but can also improve processes and outcomes, in particular for the least engaged. © The Author(s) 2016.

INNOVATIVE MIOR PROCESS UTILIZING INDIGENOUS RESERVOIR CONSTITUENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.O. Hitzman; S.A. Bailey

This research program is directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal is to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery.This microbial technology has the capability of producing multiple oil releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery. Research has begun on the program and experimental laboratory work is underway. Polymer-producing cultures have been isolated frommore » produced water samples and initially characterized. Concurrently, a microcosm scale sand-packed column has been designed and developed for testing cultures of interest, including polymer-producing strains. In research that is planned to begin in future work, comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents will be conducted in sand pack and cores with synthetic and natural field waters at concentrations, flooding rates, and with cultures and conditions representative of oil reservoirs.« less

NASA Symposium on Productivity and Quality: Strategies for Improving Operations in Government and Industry

NASA Technical Reports Server (NTRS)

1984-01-01

The purpose of the Symposium is to increase the awareness of productivity and quality issues in the United States, and to foster national initiatives through government and industry executive leadership. The Symposium will provide a forum for discussion of white-collar productivity issues by experienced executives from successful organizations and an opportunity to share information learned through Productivity initiatives in govemment, industry and academic organizations. It will focus on white-collar organizational issues that are common to large companies and technology oriented organizations. The Symposium program will include strategies for improving operations in government and industry and will be responsive to the management issues viewed necessary to increase our nation's productivity growth rate.

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 repesentatives from aerospace and computer companies. The IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management are summarized and plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems are discussed.

F-35 Joint Strike Fighter: Current Outlook Is Improved, but Long-Term Affordability Is a Major Concern

DTIC Science & Technology

2013-03-01

and improvement efforts with DOD, F-35 program, and contractor officials. We toured the aircraft manufacturing plant , obtained production and supply...members of the contractor’s work force and DOD plant representatives. We evaluated DOD’s restructuring actions and impacts on the program, tracked...Testing of the final increment is expected to begin in 2014 and continue through 2016. Initial operational test and evaluation ( IOT &E) is

Genetic considerations for mollusk production in aquaculture: current state of knowledge

PubMed Central

Astorga, Marcela P.

2014-01-01

In 2012, world mollusk production in aquaculture reached a volume of 15,171,000 tons, representing 23% of total aquaculture production and positioning mollusks as the second most important category of aquaculture products (fishes are the first). Clams and oysters are the mollusk species with the highest production levels, followed in descending order by mussels, scallops, and abalones. In view of the increasing importance attached to genetic information on aquaculture, which can help with good maintenance and thus the sustainability of production, the present work offers a review of the state of knowledge on genetic and genomic information about mollusks produced in aquaculture. The analysis was applied to mollusks which are of importance for aquaculture, with emphasis on the 5 species with the highest production levels. According to FAO, these are: Japanese clam Ruditapes philippinarum; Pacific oyster Crassostrea gigas; Chilean mussel Mytilus chilensis; Blood clam Anadara granosa and Chinese clam Sinonovacula constricta. To date, the genomes of 5 species of mollusks have been sequenced, only one of which, Crassostrea gigas, coincides with the species with the greatest production in aquaculture. Another important species whose genome has been sequenced is Mytilus galloprovincialis, which is the second most important mussel in aquaculture production, after M. chilensis. Few genetic improvement programs have been reported in comparison with the number reported in fish species. The most commonly investigated species are oysters, with at least 5 genetic improvement programs reported, followed by abalones with 2 programs and mussels with one. The results of this work will establish the current situation with respect to the genetics of mollusks which are of importance for aquaculture production, in order to assist future decisions to ensure the sustainability of these resources. PMID:25540651

Minifactory: a precision assembly system adaptable to the product life cycle

NASA Astrophysics Data System (ADS)

Muir, Patrick F.; Rizzi, Alfred A.; Gowdy, Jay W.

1997-12-01

Automated product assembly systems are traditionally designed with the intent that they will be operated with few significant changes for as long as the product is being manufactured. This approach to factory design and programming has may undesirable qualities which have motivated the development of more 'flexible' systems. In an effort to improve agility, different types of flexibility have been integrated into factory designs. Specifically, automated assembly systems have been endowed with the ability to assemble differing products by means of computer-controlled robots, and to accommodate variations in parts locations and dimensions by means of sensing. The product life cycle (PLC) is a standard four-stage model of the performance of a product from the time that it is first introduced in the marketplace until the time that it is discontinued. Manufacturers can improve their return on investment by adapting the production process to the PLC. We are developing two concepts to enable manufacturers to more readily achieve this goal: the agile assembly architecture (AAA), an abstract framework for distributed modular automation; and minifactory, our physical instantation of this architecture for the assembly of precision electro-mechanical devices. By examining the requirements which each PLC stage places upon the production system, we identify characteristics of factory design and programming which are appropriate for that stage. As the product transitions from one stage to the next, the factory design and programing should also transition from one embodiment to the next in order to achieve the best return on investment. Modularity of the factory components, highly flexible product transport mechanisms, and a high level of distributed intelligence are key characteristics of minifactory that enable this adaptation.

The dopaminergic system and aggression in laying hens

USDA-ARS?s Scientific Manuscript database

Aggression and pecking behavior in laying hens is a serious concern to the production and well-being of the hens. Current breeding programs attempt to reduce aggression in hens without altering production have had limited success. Improved understanding of the neural mediation of aggression, will be...

Energy Efficiency on Parade

Science.gov Websites

heating, ventilation and air conditioning (HVAC) systems, structural insulated panels to improve products and systems. NREL building engineers estimate the combination of advanced products and design Building America program manager George James. "All of the technologies and systems used in this house

Animal Well-Being in Small Poultry Flocks: Improving bird health and product quality

USDA-ARS?s Scientific Manuscript database

Consumer interest in farm animal welfare is increasing and, while there is little legislation, voluntary welfare assurance programs exist; however, most small poultry producers do not participate in these programs. Raising birds in small flocks has some inherent welfare advantages, such as ample sp...

GCOM-W soil moisture and temperature algorithms and validation

USDA-ARS?s Scientific Manuscript database

Passive microwave remote sensing of soil moisture has matured over the past decade as a result of the Advanced Microwave Scanning Radiometer (AMSR) program of JAXA. This program has resulted in improved algorithms that have been supported by rigorous validation. Access to the products and the valida...

Targeting Obesity through Health Promotion Programs for School Staff

ERIC Educational Resources Information Center

Herbert, Patrick C.; Lohrmann, David K.; Hall, Cougar

2017-01-01

Health promotion programs for school staff are an overlooked and under-utilized resource that can lead to reductions in overweight and obesity among teachers and other staff members if implemented properly. In addition to increasing the overall staff wellness, boosting morale, increasing productivity, improving academic achievement, providing…

Standardizing Interpretive Training to Create a More Meaningful Visitor Experience

ERIC Educational Resources Information Center

Carr, Rob

2016-01-01

Implementing a standardized interpretive training and mentoring program across multiple departments has helped created a shared language that staff and volunteers use to collaborate and evaluate interpretive programs and products. This has led to more efficient and effective training and measurable improvements in the quality of the visitor's…

PowerGuard® manufacturing innovation and expansion

NASA Astrophysics Data System (ADS)

Dinwoodie, Thomas; Kleiner, Tim; O'Brien, Colleen; Quiroz, Maurice

1999-03-01

PowerLight Corporation, with support from the DOE's PVMaT program, has undertaken a comprehensive agenda to automate the manufacture of its PowerGuard PV roof tile system. The advanced manufacturing will lead to substantially reduced costs, quality improvements, and increased production capacity. Over the three years of the PVMaT contract, system costs are expected to fall 2.65/Wp, with annual production capability increasing from 5 to 16 MW. PowerLight is on schedule with meeting its objectives under this program.

The Human Factor in Business--And in Schools.

ERIC Educational Resources Information Center

Sparks, Dennis

1984-01-01

When business management begins to be concerned with its employees, productivity improves. A variety of human resource development programs used in business can be adapted to educational settings. The school staff developer's role is to improve job satisfaction, health, and motivation of staff members. (DF)

Plant breeding for harmony between agriculture and the environment

USDA-ARS?s Scientific Manuscript database

Crop improvements made since the 1950’s coupled with inexpensive agronomic inputs (fertilizers, herbicides, etc.) have resulted in agricultural production that has kept pace with population growth. Breeding programs primarily focus on improving a crop’s environmental adaptability and biotic stress t...

Increasing Productivity with Microcomputers: Key to Improvement of Special Educattion in the 1980s.

ERIC Educational Resources Information Center

Brady, Richard C.; Dodge, Bernard J.

1982-01-01

Five microcomputer applications which may improve the management of teacher education programs are noted (database management, word processing, spread sheets, project scheduling and management, and test scoring), and six steps in introducing microcomputers into a department are discussed. (CL)

Improving efficiency and access to mental health care: combining integrated care and advanced access.

PubMed

Pomerantz, Andrew; Cole, Brady H; Watts, Bradley V; Weeks, William B

2008-01-01

To provide an example of implementation of a new program that enhances access to mental health care in primary care. A general and specialized mental health service was redesigned to introduce open access to comprehensive mental health care in a primary care clinic. Key variables measured before and after implementation of the clinic included numbers of completed referrals, waiting time for appointments and clinic productivity. Workload and pre/post-implementation waiting time data were gathered through a computerized electronic monitoring system. Waiting time for new appointments was shortened from a mean of 33 days to 19 min. Clinician productivity and evaluations of new referrals more than doubled. These improvements have been sustained for 4 years. Moving mental health services into primary care, initiating open access and increasing use of technological aids led to dramatic improvements in access to mental health care and efficient use of resources. Implementation and sustainability of the program were enhanced by using a quality improvement approach.

Twenty-five years of accomplishments of the College of American Pathologists Q-probes program for clinical pathology.

PubMed

Howanitz, Peter J; Perrotta, Peter L; Bashleben, Christine P; Meier, Frederick A; Ramsey, Glenn E; Massie, Larry W; Zimmerman, Roberta L; Karcher, Donald S

2014-09-01

During the past 25 years, the College of American Pathologists' (CAP) Q-Probes program has been available as a subscription program to teach laboratorians how to improve the quality of clinical laboratory services. To determine the accomplishments of the CAP Q-Probes program. We reviewed Q-Probes participant information, study data and conclusions, author information, and program accomplishments. During this time 117 Q-Probes clinical pathology studies were conducted by 54 authors and coauthors, 42,899 laboratories enrolled from 24 countries, 98 peer-reviewed publications occurred and were cited more than 1600 times, and the studies were featured 59 times in CAP Today. The most frequent studies (19) focused on turnaround times for results or products at specific locations (emergency department, operating room, inpatients, outpatients), specific diseases (acute myocardial infarction, urinary tract), availability for specific events such as morning rounds or surgery, a specific result (positive blood cultures), and a method on how to use data for improvement (stat test outliers). Percentile ranking of study participants with better performance provided benchmarks for each study with attributes statistically defined that influenced improved performance. Other programs, such as an ongoing quality improvement program (Q-Tracks), a laboratory competency assessment program, a pathologist certification program, and an ongoing physician practice evaluation program (Evalumetrics), have been developed from Q-Probes studies. The CAP's Q-Probes program has made significant contributions to the medical literature and has developed a worldwide reputation for improving the quality of clinical pathology services worldwide.

Assessment Study on Sensors and Automation in the Industries of the Future. Reports on Industrial Controls, Information Processing, Automation, and Robotics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Bonnie; Boddy, Mark; Doyle, Frank

This report presents the results of an expert study to identify research opportunities for Sensors & Automation, a sub-program of the U.S. Department of Energy (DOE) Industrial Technologies Program (ITP). The research opportunities are prioritized by realizable energy savings. The study encompasses the technology areas of industrial controls, information processing, automation, and robotics. These areas have been central areas of focus of many Industries of the Future (IOF) technology roadmaps. This report identifies opportunities for energy savings as a direct result of advances in these areas and also recognizes indirect means of achieving energy savings, such as product quality improvement,more » productivity improvement, and reduction of recycle.« less

Healthcare Commercialization Programs: Improving the Efficiency of Translating Healthcare Innovations From Academia Into Practice

PubMed Central

Reizes, Ofer; Dempsey, Michael K.

2016-01-01

Academic investigators are generating a plethora of insights and technologies that have the potential to significantly improve patient care. However, to address the imperative to improve the quality, cost and access to care with ever more constrained funding, the efficiency and the consistency with which they are translated into cost effective products and/or services need to improve. Healthcare commercialization programs (HCPs) are described and proposed as an option that institutions can add to their portfolio to improve translational research. In helping teams translate specific healthcare innovations into practice, HCPs expand the skillset of investigators and enhance an institution’s innovation capacity. Lessons learned are shared from configuring and delivering HCPs, which build on the fundamentals of the National Science Foundation’s Innovation Corps program, to address the unique challenges in supporting healthcare innovations and innovators. PMID:27766188

Successful strategies for building thriving undergraduate physics programs at minority serving institutions

NASA Astrophysics Data System (ADS)

Williams, Quinton

2013-03-01

After having been pulled back from the brink of academic program deletion, Jackson State University (Jackson, Mississippi) is now the only HBCU (Historically Black College and University) listed as a top producer of B.S. degrees earned by African Americans in both fields of physics and geoscience. Very pragmatic, strategic actions were taken to enhance the undergraduate degree program which resulted in it becoming one of the most productive academic units at the university. Successful strategies will be shared for growing the enrollment of physics majors, building productive research/educational programs, and improving the academic performance of underprepared students. Despite myriad challenges faced by programs at minority serving institutions in a highly competitive 21st century higher education system, it is still possible for undergraduate physics programs to transition from surviving to thriving.

Optimizing antiretroviral product selection: a sample approach to improving patient outcomes, saving money, and scaling-up health services in developing countries.

PubMed

Amole, Carolyn D; Brisebois, Catherine; Essajee, Shaffiq; Koehler, Erin; Levin, Andrew D; Moore, Meredith C; Brown Ripin, David H; Sickler, Joanna J; Singh, Inder R

2011-08-01

Over the last decade, increased funding to support HIV treatment programs has enabled millions of new patients in developing countries to access the medications they need. Today, although demand for antiretrovirals continues to grow, the financial crisis has severely constrained funding leaving countries with difficult choices on program prioritization. Product optimization is one solution countries can pursue to continue to improve patient care while also uncovering savings that can be used for further scale up or other health system needs. Program managers can make procurement decisions that actually reduce program costs by considering additional factors beyond World Health Organization guidelines when making procurement decisions. These include in-country product availability, convenience, price, and logistics such as supply chain implications and laboratory testing requirements. Three immediate product selection opportunities in the HIV space include using boosted atazanavir in place of lopinovir for second-line therapy, lamivudine instead of emtricitabine in both first-line and second-line therapy, and tenofovir + lamivudine over abacavir + didanosine in second-line therapy. If these 3 opportunities were broadly implemented in sub-Saharan Africa and India today, approximately $300 million of savings would be realized over the next 5 years, enabling hundreds of thousands of additional patients to be treated. Although the discussion herein is specific to antriretrovirals, the principles of product selection are generalizable to diseases with multiple treatment options and fungible commodity procurement. Identifying and implementing approaches to overcome health system inefficiencies will help sustain and may expand quality care in resource-limited settings.

Development and operation of a quality assurance system for deviations from standard operating procedures in a clinical cell therapy laboratory.

PubMed

McKenna, D; Kadidlo, D; Sumstad, D; McCullough, J

2003-01-01

Errors and accidents, or deviations from standard operating procedures, other policy, or regulations must be documented and reviewed, with corrective actions taken to assure quality performance in a cellular therapy laboratory. Though expectations and guidance for deviation management exist, a description of the framework for the development of such a program is lacking in the literature. Here we describe our deviation management program, which uses a Microsoft Access database and Microsoft Excel to analyze deviations and notable events, facilitating quality assurance (QA) functions and ongoing process improvement. Data is stored in a Microsoft Access database with an assignment to one of six deviation type categories. Deviation events are evaluated for potential impact on patient and product, and impact scores for each are determined using a 0- 4 grading scale. An immediate investigation occurs, and corrective actions are taken to prevent future similar events from taking place. Additionally, deviation data is collectively analyzed on a quarterly basis using Microsoft Excel, to identify recurring events or developing trends. Between January 1, 2001 and December 31, 2001 over 2500 products were processed at our laboratory. During this time period, 335 deviations and notable events occurred, affecting 385 products and/or patients. Deviations within the 'technical error' category were most common (37%). Thirteen percent of deviations had a patient and/or a product impact score > or = 2, a score indicating, at a minimum, potentially affected patient outcome or moderate effect upon product quality. Real-time analysis and quarterly review of deviations using our deviation management program allows for identification and correction of deviations. Monitoring of deviation trends allows for process improvement and overall successful functioning of the QA program in the cell therapy laboratory. Our deviation management program could serve as a model for other laboratories in need of such a program.

Impact of the Surgical Research Methodology Program on surgical residents' research profiles.

PubMed

Farrokhyar, Forough; Amin, Nalin; Dath, Deepak; Bhandari, Mohit; Kelly, Stephan; Kolkin, Ann M; Gill-Pottruff, Catherine; Skot, Martina; Reid, Susan

2014-01-01

To evaluate whether implementing the formal Surgical Research Methodology (SRM) Program in the surgical residency curriculum improved research productivity compared with the preceding informal Research Seminar Series (RSS). The SRM Program replaced the RSS in July 2009. In the SRM Program, the curriculum in Year-1 consisted of 12 teaching sessions on the principles of clinical epidemiology and biostatistics, whereas the focus in Year-2 was on the design, conduct, and presentation of a research project. The RSS consisted of 8 research methodology sessions repeated annually for 2 years along with the design, conduct, and presentation of a research project. Research productivity was measured as the number of peer-reviewed publications and the generation of studies with higher levels of evidence. Outcome measures were independently assessed by 2 authors to avoid bias. Student t test and chi-square test were used for the analysis. Frequencies, mean differences with 95% CI, and effect sizes have been reported. In this study, 81 SRM residents were compared with 126 RSS residents. The performance of the SRM residents was superior on all metrics in our evaluation. They were significantly more productive and published more articles than the RSS residents (mean difference = 1.0 [95% CI: 0.5-1.5], p < 0.001) with an effect size of 0.26. The SRM residents presented significantly more projects that were of higher levels of evidence (systematic reviews/meta-analyses, randomized controlled trials, and prospective cohorts) than the RSS residents (52.5% vs 29%, p = 0.005). In addition, the research performance improved 11.0 grades (95% CI: 8.5%-13.5%, p < 0.001) with an effect size of 0.51 in favor of the SRM Program. Although not all surgeons opt for a career as surgeon-scientist, knowledge of research methodology is crucial to appropriately apply evidence-based findings in clinical practice. The SRM Program has significantly improved the research productivity and performance of the surgical residents from all disciplines. The implementation of a similar research methodology program is highly recommended for the benefit of residents' future careers and ultimately, evidence-based patient care. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Project LEAP: The Labor Education Achievement Program. A Program To Improve the Literacy Level and Productivity of the Workforce. Final Project Report. April 1, 1991-September 30, 1992.

ERIC Educational Resources Information Center

Metropolitan Baltimore Council of AFL-CIO Unions, MD.

Maryland's Labor Education Achievement Program (LEAP) worked with a wide diversity of union workers in multiple industries and within numerous private companies and public agencies over a dispersed geographic area. Staff development included a workshop for local coordinators and a teacher inservice training session. LEAP provided…

A turbocharger for the 1990s

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, E.R.

1991-07-01

This paper reports that the large-bore engines of the 1970s and 1980s have seen tremendous amounts of technological improvements. The key buzzwords were: Lower the emissions, and improve the fuel consumption. As the 1990s approach dramatic improvements in specific outputs along with continued research to further improve emissions and fuel consumption. One of the keys to success will have to be the degree to which the industry responds with improvements in turbocharger performance. In 1985, Cooper Bessemer Rotating Products Division began a program to develop the turbocharger of the 1990s. This paper will describe the development of the CB turbochargermore » series from concept to early production.« less

Addressing hospital-acquired pressure ulcers: patient care managers enhancing outcomes at the point of service.

PubMed

Frumenti, Jeanine M; Kurtz, Abby

2014-01-01

An innovative leadership training program for patient care managers (PCMs) aimed at improving the management of operational failures was conducted at a large metropolitan hospital center. The program focused on developing and enhancing the transformational leadership skills of PCMs by improving their ability to manage operational failures in general and, in this case, hospital-acquired pressure ulcers. The PCMs received 8 weeks of intense training using the Toyota Production System process improvement approach, along with executive coaching. Compared with the control group, the gains made by the intervention group were statistically significant.

Which Factor, Teaching or Writing, Contributes More to Faculty Development?

ERIC Educational Resources Information Center

Boice, Robert

The effect of a highly-structured faculty development program that focused on improving teaching skills and writing productivity through weekly individual sessions was studied with 16 social sciences faculty. Participants were alternatively assigned to one of four groups that emphasized development in teaching skills, writing productivity, or a…

System Development of Estimated Figures of Volume Production Plan

ERIC Educational Resources Information Center

Brazhnikov, Maksim A.; Khorina, Irina V.; Minina, Yulia I.; Kolyasnikova, Lyudmila V.; Streltsov, Aleksey V.

2016-01-01

The relevance of this problem is primarily determined by a necessity of improving production efficiency in conditions of innovative development of the economy and implementation of Import Substitution Program. The purpose of the article is development of set of criteria and procedures for the comparative assessment of alternative volume production…

Socio-Economic Impact Assessment of the Computerized Customer Information System (CCIS) at the Southern California Rapid Transit District (SCRTD)

DOT National Transportation Integrated Search

1983-06-01

This document is a product of an ongoing program to assess the impacts of automated transit information system (ATIS) technology on the transit industry's efforts to improve the productivity and quality of telephone information/marketing services to ...

Understanding Acceptance of Software Metrics--A Developer Perspective

ERIC Educational Resources Information Center

Umarji, Medha

2009-01-01

Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Rapidly Degradable Pyrotechnic System

DTIC Science & Technology

2009-02-01

casing. The second material and primary focus of the program effort was the improvement of a newly emerging enzyme , a thermophilic hydrolase formed...12 3.2.4.1 Details of Selected Enzyme (Description, Production and Environmental Impact) ......................14 4. MATERIALS AND METHODS...24 5.3 Improvement of extracelular enzyme secretion

Tri-Lab Co-Design Milestone: In-Depth Performance Portability Analysis of Improved Integrated Codes on Advanced Architecture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert J.; Hammond, Simon David; Richards, David

2017-09-01

This milestone is a tri-lab deliverable supporting ongoing Co-Design efforts impacting applications in the Integrated Codes (IC) program element Advanced Technology Development and Mitigation (ATDM) program element. In FY14, the trilabs looked at porting proxy application to technologies of interest for ATS procurements. In FY15, a milestone was completed evaluating proxy applications in multiple programming models and in FY16, a milestone was completed focusing on the migration of lessons learned back into production code development. This year, the co-design milestone focuses on extracting the knowledge gained and/or code revisions back into production applications.

IVS Working Group 2 for Product Specification and Observing Programs

NASA Astrophysics Data System (ADS)

Schuh, H.; Charlot, P.; Hase, H.; Himwich, E.; Kingham, K.; Klatt, C.; Ma, C.; Malkin, Z.; Niell, A.; Nothnagel, A.; Schluter, W.; Takashima, K.; Vandenberg, N.

2002-03-01

After the scientific rationale is given in the introduction the Terms of Reference and the proceeding of IVS Working Group 2 are presented. Then the present status and future goals of all international activities within IVS are described. In particular the current products of IVS are described in terms of accuracy, reliability, frequency of observing sessions, temporal resolution of the parameters estimated by VLBI data analysis, time delay from observing to product, i.e. time which has passed after the end of the last session included in the VLBI solution till availability of the final products and frequency of solution (in the case of "global solutions";, when all existing or a high number of VLBI sessions are used to determine so-called global parameters). All IVS products and their potential users are covered in the report. This includes the Earth orientation parameters (EOP), the reference frames (TRF and CRF), geodynamical and geophysical parameters and physical parameters. Measures which should be taken within IVS to meet the goals defined in the first steps are presented. As most of the measures are related to the observing programs, these are the main focus for improving the current status of IVS products. The report shows that due to various requirements of the different users of IVS products the following aspects must be accomplished: - significant improvement of the accuracy of VLBI products, - shorter time delay from observation to availability of results, - almost continuous temporal coverage by VLBI sessions. A first scenario of the IVS observing program for 2002 and 2003 considers an increase of observing time by about 30%-40% and includes sessions carried out by S2 and K4 technology. The midterm observing program for the next 4-5 years seems to be rather ambitious. However, it appears feasible if all efforts are concentrated and the necessary resources are made available. From: Bidzina Kapanadze (Ilia State Iniversity) Address: bidzina_kapanadze@iliauni.edu.ge Database: ast

The Use of Lean Six Sigma Methodology in Increasing Capacity of a Chemical Production Facility at DSM.

PubMed

Meeuwse, Marco

2018-03-30

Lean Six Sigma is an improvement method, combining Lean, which focuses on removing 'waste' from a process, with Six Sigma, which is a data-driven approach, making use of statistical tools. Traditionally it is used to improve the quality of products (reducing defects), or processes (reducing variability). However, it can also be used as a tool to increase the productivity or capacity of a production plant. The Lean Six Sigma methodology is therefore an important pillar of continuous improvement within DSM. In the example shown here a multistep batch process is improved, by analyzing the duration of the relevant process steps, and optimizing the procedures. Process steps were performed in parallel instead of sequential, and some steps were made shorter. The variability was reduced, giving the opportunity to make a tighter planning, and thereby reducing waiting times. Without any investment in new equipment or technical modifications, the productivity of the plant was improved by more than 20%; only by changing procedures and the programming of the process control system.

Can a Clinician-Scientist Training Program Develop Academic Orthopaedic Surgeons? One Program's Thirty-Year Experience.

PubMed

Brandt, Aaron M; Rettig, Samantha A; Kale, Neel K; Zuckerman, Joseph D; Egol, Kenneth A

2017-10-25

Clinician-scientist numbers have been stagnant over the past few decades despite awareness of this trend. Interventions attempting to change this problem have been seemingly ineffective, but research residency positions have shown potential benefit. We sought to evaluate the effectiveness of a clinician-scientist training program (CSTP) in an academic orthopedic residency in improving academic productivity and increasing interest in academic careers. Resident training records were identified and reviewed for all residents who completed training between 1976 and 2014 (n = 329). There were no designated research residents prior to 1984 (pre-CSTP). Between 1984 and 2005, residents self-selected for the program (CSTP-SS). In 2005, residents were selected by program before residency (CSTP-PS). Residents were also grouped by program participation, research vs. clinical residents (RR vs. CR). Data were collected on academic positions and productivity through Internet-based and PubMed search, as well as direct e-mail or phone contact. Variables were then compared based on the time duration and designation. Comparing all RR with CR, RR residents were more likely to enter academic practice after training (RR, 34%; CR, 20%; p = 0.0001) and were 4 times more productive based on median publications (RR, 14; CR, 4; p < 0.0001). Furthermore, 42% of RR are still active in research compared to 29% of CR (p = 0.04), but no statistical difference in postgraduate academic productivity identified. The CSTP increased academic productivity during residency for the residents and the program. However, this program did not lead to a clear increase in academic productivity after residency and did not result in more trainees choosing a career as clinician-scientists. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Assuring reliability program effectiveness.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1973-01-01

An attempt is made to provide simple identification and description of techniques that have proved to be most useful either in developing a new product or in improving reliability of an established product. The first reliability task is obtaining and organizing parts failure rate data. Other tasks are parts screening, tabulation of general failure rates, preventive maintenance, prediction of new product reliability, and statistical demonstration of achieved reliability. Five principal tasks for improving reliability involve the physics of failure research, derating of internal stresses, control of external stresses, functional redundancy, and failure effects control. A final task is the training and motivation of reliability specialist engineers.

Photovoltaic Research in the Small Business Innovative Research Program

NASA Astrophysics Data System (ADS)

Bower, Ward I.; Bulawka, Alec

1997-02-01

The Small Business Innovative Research Program (SBIR) is currently authorized to be funded through September 30, 2000. The National Photovoltaics Program is a contributor to the Department of Energy (DOE) SBIR program. The small business photovoltaic industry has been benefiting from the SBIR program through awards that have funded basic research, new processes and products that have PV and other commercial applications. This paper provides information on SBIR opportunities, selected details of the SBIR program, statistics from the 1995 and 1996 DOE SBIR program, and methods for improving PV industry participation and success in the SBIR program.

Research and development of energy-efficient appliance motor-compressors. Volume IV. Production demonstration and field test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Middleton, M.G.; Sauber, R.S.

Two models of a high-efficiency compressor were manufactured in a pilot production run. These compressors were for low back-pressure applications. While based on a production compressor, there were many changes that required production process changes. Some changes were performed within our company and others were made by outside vendors. The compressors were used in top mount refrigerator-freezers and sold in normal distribution channels. Forty units were placed in residences for a one-year field test. Additional compressors were built so that a life test program could be performed. The results of the field test reveal a 27.0% improvement in energy consumptionmore » for the 18 ft/sup 3/ high-efficiency model and a 15.6% improvement in the 21 ft/sup 3/ improvement in the 21 ft/sup 3/ high-efficiency model as compared to the standard production unit.« less

FY 1987 Aquatic Species Program: Annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.A.; Sprague, S.

The goal of the Department of Energy/Solar Energy Research Institute Aquatic Species Program is to develop the technology base to produce liquid fuels from microalagae at prices competitive with conventional alternatives. Microalgae are unusual plants that can accumulate large quantities of oil and can thrive in high-salinity water, which currently has no competing uses. The algal oils, in turn, are readily converted into gasoline and diesel fuels. The best site for successful microalgae production was determined to be the US desert Southwest, with potential applications to other warm areas. Aggressive research is needed, but the improvements required are attainable. Themore » four prime research areas in the development of this technology are growth and production, engineering design, harvesting, and conversion. Algae are selected for three criteria: tolerance to environmental fluctuations, high growth rates, and high lipid production. From 1982 to 1986, the program collected more than 3000 strains of microalgae that are more than twice as tolerant to temperature and salinity fluctuation than the initial strains. Productivity has been increased by a factor of two in outdoor culture systems since 1982, and lipid content has also been increased from 20% of body weight in 1982 to greater than 66% of body weight in 1987. Research programs are ongoing in lipid biochemistry and genetic engineering so that ultimately strains can be modified and improved to combine their best characteristics. An outdoor test facility is being built in Roswell, New Mexico.« less

Voluntary medical male circumcision scale-up in Nyanza, Kenya: evaluating technical efficiency and productivity of service delivery.

PubMed

Omondi Aduda, Dickens S; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

2015-01-01

Voluntary medical male circumcision (VMMC) service delivery is complex and resource-intensive. In Kenya's context there is still paucity of information on resource use vis-à-vis outputs as programs scale up. Knowledge of technical efficiency, productivity and potential sources of constraints is desirable to improve decision-making. To evaluate technical efficiency and productivity of VMMC service delivery in Nyanza in 2011/2012 using data envelopment analysis. Comparative process evaluation of facilities providing VMMC in Nyanza in 2011/2012 using output orientated data envelopment analysis. Twenty one facilities were evaluated. Only 1 of 7 variables considered (total elapsed operation time) significantly improved from 32.8 minutes (SD 8.8) in 2011 to 30 minutes (SD 6.6) in 2012 (95%CI = 0.0350-5.2488; p = 0.047). Mean scale technical efficiency significantly improved from 91% (SD 19.8) in 2011 to 99% (SD 4.0) in 2012 particularly among outreach compared to fixed service delivery facilities (CI -31.47959-4.698508; p = 0.005). Increase in mean VRS technical efficiency from 84% (SD 25.3) in 2011 and 89% (SD 25.1) in 2012 was not statistically significant. Benchmark facilities were #119 and #125 in 2011 and #103 in 2012. Malmquist Productivity Index (MPI) at fixed facilities declined by 2.5% but gained by 4.9% at outreach ones by 2012. Total factor productivity improved by 83% (p = 0.032) in 2012, largely due to progress in technological efficiency by 79% (p = 0.008). Significant improvement in scale technical efficiency among outreach facilities in 2012 was attributable to accelerated activities. However, ongoing pure technical inefficiency requires concerted attention. Technological progress was the key driver of service productivity growth in Nyanza. Incorporating service-quality dimensions and using stepwise-multiple criteria in performance evaluation enhances comprehensiveness and validity. These findings highlight site-level resource use and sources of variations in VMMC service productivity, which are important for program planning.

The business of pediatric hospital medicine.

PubMed

Percelay, Jack M; Zipes, David G

2014-07-01

Pediatric hospital medicine (PHM) programs are mission driven, not margin driven. Very rarely do professional fee revenues exceed physician billing collections. In general, inpatient hospital care codes reimburse less than procedures, payer mix is poor, and pediatric inpatient care is inherently time-consuming. Using traditional accounting principles, almost all PHM programs will have a negative bottom line in the narrow sense of program costs and revenues generated. However, well-run PHM programs contribute positively to the bottom line of the system as a whole through the value-added services hospitalists provide and hospitalists' ability to improve overall system efficiency and productivity. This article provides an overview of the business of hospital medicine with emphasis on the basics of designing and maintaining a program that attends carefully to physician staffing (the major cost component of a program) and physician charges (the major revenue component of the program). Outside of these traditional calculations, resource stewardship is discussed as a way to reduce hospital costs in a capitated or diagnosis-related group reimbursement model and further improve profit-or at least limit losses. Shortening length of stay creates bed capacity for a program already running at capacity. The article concludes with a discussion of how hospitalists add value to the system by making other providers and other parts of the hospital more efficient and productive. Copyright 2014, SLACK Incorporated.

Crew resource management training within the automotive industry: does it work?

PubMed

Marquardt, Nicki; Robelski, Swantje; Hoeger, Rainer

2010-04-01

This article presents the development, implementation, and evaluation of a crew resource management (CRM) training program specifically designed for employees within the automotive industry. The central objective of this training program was to improve communication, teamwork, and stress management skills as well to increase the workers' situational awareness of potential errors that can occur during the production process. Participants in the training program of this study were 80 employees, all of whom were working in a production unit for gearbox manufacturing. Effectiveness of the CRM training course was evaluated two times (1 month and 6 months after the training program). The results showed a significant improvement in a wide range of CRM-relevant categories, especially in teamwork-related attitudes, in addition to an increase in the workers' situational awareness after the training program. On the basis of the results, it can be stated that CRM training, which was originally developed for the aviation industry, can be transferred to the automotive industry. However, because of the lack of behavioral observations, these effects are limited to CRM attitudes and knowledge changes. Several recommendations for future research and training development in the field of human factors training are made.

How development programs can affect fertility: the case of Bangladesh.

PubMed

Robey, B

1988-09-01

Improving living standards and increasing productivity in developing countries may result in fertility reduction. In Bangladesh, government policy stresses rural development and fertility reduction. Programs that raise women's status reduce fertility. Educational level is inversely correlated to childbearing. Women aged 25-29 with a Secondary School Certificate have 2.4 children, versus 4.0 for those with no education. Employment also decreases fertility. Thus, improving the educational and employment status of women could have major effects on fertility. Studying the Bangladesh Rural Social Services program revealed that community organization efforts and self-help programs for economic and social improvement also decrease fertility. Rural electrification programs, which have been emphasized in development planning, contribute to changing attitudes and behavior of residents of these regions. In addition to electrification, improved transportation and communications should enhance the spread of information to rural areas. Agricultural development programs, such as the Comilla development program, have not affected fertility. This is attributed to the concentration of benefits to a few farms, with the majority becoming poorer. Unless agricultural development benefits are widely distributed, there will probably be little effect on fertility. Thus, the development programs most likely to affect fertility are those which emphasize female education and employment, open rural areas to information and ideas, and are open to a whole community.

Five Years Later: A Look at the EIA Investment.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Div. of Public Accountability.

A 5-year review of the impact of South Carolina's comprehensive reform legislation, the Education Improvement Act of 1984 (EIA), is presented. Throughout the report, comparisons of EIA program productivity in 1989 with pre-EIA performance are displayed in short program summaries, 33 graphs, and 14 tables. The EIA targeted seven major areas for…

College of Lake County National Workplace Literacy Program. Final Report.

ERIC Educational Resources Information Center

Gee, Mary Kay

The College of Lake County's 3-year National Workplace Literacy Program (1994-1997) contributed to economic development by meeting companies' changing educational and production needs as they fluctuated and met new challenges for global marketing and improvement. It assessed 883 employees at 8 business sites with customized assessment tools and…

A Federal Perspective on Improving Practices, Programs, and Policies in Special Education.

ERIC Educational Resources Information Center

Kaufman, Martin; And Others

1993-01-01

Unification of objective and subjective models is suggested as a means for contributing to a professional knowledge base for special education. The knowledge production, access, and use activities of the Office of Special Education programs are user oriented, while incorporating the empirical rigor of the initial research and evaluation. (SLD)

Flocking to Film School. Learning the Realities of Hollywood in the Classroom.

ERIC Educational Resources Information Center

Hawkins, B. Denise

1996-01-01

A New York University program in film and television production is working to improve the participation of people of color and women in the film industry, where these populations have been underrepresented. Increasingly, graduates are succeeding in breaking into the industry, historically difficult to enter through academic programs. (MSE)

Hybrid Food Preservation Program Improves Food Preservation and Food Safety Knowledge

ERIC Educational Resources Information Center

Francis, Sarah L.

2014-01-01

The growing trend in home food preservation raises concerns about whether the resulting food products will be safe to eat. The increased public demand for food preservation information led to the development of the comprehensive food preservation program, Preserve the Taste of Summer (PTTS). PTTS is a comprehensive hybrid food preservation program…

Multi-Image or Lap-Dissolve Slide Techniques and Visual Images in the Large Lecture Section.

ERIC Educational Resources Information Center

Bodner, George M.; And Others

1984-01-01

Advantages and disadvantages of using multi-image or lap-dissolve (LD) slide techniques in large lecture sections are discussed. Production, use, and evaluation of LD programs are also discussed. Indicates that these programs are an effective way of improving instruction on visually oriented topics. (JN)

'Feel better/work better' epitomizes employee fitness program.

PubMed

Molidor, C

1979-01-01

It stands to reason that employees who feel better will take less time off because of illness and, consequently, improve their productivity. Rather than leave the health of their employees to chance, the Mercy Center for Health Care Services in Aurora, IL, put together a program that develops the total fitness of individual employees.

76 FR 65909 - Medicare and Medicaid Program; Regulatory Provisions To Promote Program Efficiency, Transparency...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... commonly found in other medical facilities, for example, cooking, anesthesia, paint shops, or piped-in... Part A and Part B claims appeals. In 2003, the Medicare Prescription Drug, Improvement, and... BIPA. The Food and Drug Administration's (FDA) categorization of a product as a category A device is...

The Army Budget Amended Fiscal Year 1990-91

DTIC Science & Technology

1989-05-01

Station -PERS: Personnel -PGTS: Precision Gunnery Target System -PHIL: Phillipines -PIP: Product Improvement Program -PL: Public Law -PM TRADE : Program...COMANDS 24.174 24.884 27,092 37,280 FOREIGN CURRECY FLUCTUATION 453,848 73,260 0 0 009 BASE INFORMATION MANAGEMENT 72,028 68.967 78,953 80,323 056 BASE

Y-Linked markers for improved population control of the tephritid fruit fly pest, Anastrepha suspensa

USDA-ARS?s Scientific Manuscript database

Insect pest control programs incorporating the sterile insect technique (SIT) rely on the mass production and release of sterilized insects to reduce the wild-type population through infertile matings. Most effective programs release only males to avoid any crop damage caused by female fruit flies o...

76 FR 56661 - Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, General...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... designed to improve energy efficiency and established the Energy Conservation Program for Consumer Products... prescribed or amended under this section must be reasonably designed to produce test results which measure... conservation standards for GSILs which include for the first time minimum rated lifetime requirements that are...

Questions for Online Surveys

ERIC Educational Resources Information Center

Ritter, Lois A., Ed.; Sue, Valerie M., Ed.

2007-01-01

The primary function of an evaluation is often to assess the degree of success of a program or to collect information that may be used to improve a program, product, or service. To meet an evaluation's goals and objectives by using an online survey, it is imperative that the questionnaire contain valid and reliable items asked about specific…

Validation of the GCOM-W SCA and JAXA soil moisture algorithms

USDA-ARS?s Scientific Manuscript database

Satellite-based remote sensing of soil moisture has matured over the past decade as a result of the Global Climate Observing Mission-Water (GCOM-W) program of JAXA. This program has resulted in improved algorithms that have been supported by rigorous validation. Access to the products and the valida...

An Inservice Program for Vocational Teachers of the Disadvantaged. Handbook.

ERIC Educational Resources Information Center

Ehresman, Norman D.; And Others

A product of a research project designed to improve the teaching effectiveness of vocational teachers of disadvantaged students, this handbook includes the specific procedures and materials that can be utilized in an inservice program for vocational teachers of disadvantaged youth. (The final report of this project is contained in a separate…

Remote monitoring and Tennessee Valley Authority programs

NASA Technical Reports Server (NTRS)

Stevens, A. R.; Voss, A. W.

1977-01-01

The Tennessee Valley Authority was created in 1933 as a resource development agency and was charged with the basic mission of improving the economy of a depressed region through power production, flood control, and navigation. Those programs which availed themselves of remotely monitored data, either directly or indirectly supporting this mission, were examined.

Toward full life cycle control: Adding maintenance measurement to the SEL

NASA Technical Reports Server (NTRS)

Rombach, H. Dieter; Ulery, Bradford T.; Valett, Jon D.

1992-01-01

Organization-wide measurement of software products and processes is needed to establish full life cycle control over software products. The Software Engineering Laboratory (SEL)--a joint venture between NASA GSFC, the University of Maryland, and Computer Sciences Corporation--started measurement of software development more than 15 years ago. Recently, the measurement of maintenance was added to the scope of the SEL. In this article, the maintenance measurement program is presented as an addition to the already existing and well-established SEL development measurement program and evaluated in terms of its immediate benefits and long-term improvement potential. Immediate benefits of this program for the SEL include an increased understanding of the maintenance domain, the differences and commonalities between development and maintenance, and the cause-effect relationships between development and maintenance. Initial results from a sample maintenance study are presented to substantiate these benefits. The long-term potential of this program includes the use of maintenance baselines to better plan and manage future projects and to improve development and maintenance practices for future projects wherever warranted.

Operational Efficiency and Productivity Improvement Initiatives in a Large Cardiac Catheterization Laboratory.

PubMed

Reed, Grant W; Hantz, Scott; Cunningham, Rebecca; Krishnaswamy, Amar; Ellis, Stephen G; Khot, Umesh; Rak, Joe; Kapadia, Samir R

2018-02-26

This study sought to report outcomes from an efficiency improvement project in a large cardiac cath lab. Operational inefficiencies are common in the cath lab, yet solutions are challenging. A detailed report describing and providing solutions for these inefficiencies may be valuable in guiding improvements in productivity. In this observational study, the authors report metrics of efficiency before and after a cath lab quality improvement program in June 2014. Main outcomes included lab room start times, room turnaround times, laboratory use, and employee satisfaction. Time series analysis was used to assess trend over time. Chi-square testing and analysis of variance were used to assess change before and after the initiative. The principal changes included implementation of a pyramidal nursing schedule, increased use of an electronic scheduling system, and increased utilization of a preparation and recovery area. Comparing before with after the program, start times improved an average of 17 min, and on-time starts improved from 61.8% to 81.7% (p = 0.0024). Turnaround times improved from 20.5 min to 16.4 min (trend p < 0.0001), and the proportion of days at full lab utilization improved from 7.7% to 77.3% (p < 0.00001). There were no increases in overtime, night, or weekend cases. There was a reduction in full time employees from 36.1 in 2013 to 29.6 in 2016, with an improvement in employee satisfaction. A systematic approach to reducing inefficiencies can improve cath lab start times, turnaround times, and overall productivity. This knowledge may be helpful in assisting other cath labs in similar efficiency improvement initiatives. Copyright © 2018 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Collaboration of chemistry instructional games and group investigation (Gi) model to improve learning outcome in high school students

NASA Astrophysics Data System (ADS)

Puspita, Ita; Sugiyarto, Kristian H.; Ikhsan, Jaslin

2017-05-01

The aims of this research are to: (1) develop chemistry instructional games on reaction rate matter; and (2) reveal the collaboration of chemistry instructional games and group investigation model to improvement learning outcome in high school student. This study is research and development (R&D). The procedure of developing product was adapted from Borg & Gall that modified into three principal steps: product planning, product developing, and product evaluating. The product planning step consist of field study, literature study, and manufacturing product. Product developing was developed product using Adobe Flash Professional CS 6 program. The last, product evaluating was performed by year XI of high school students, uses experimental methods nonequivalent control-group design by control class and experiment class. The results of this research show that: (1) a software of chemistry instructional games successfully developed using Adobe Flash Professional CS 6 and can be run on Android device; and (2) the test results of students showed that the collaboration of instructional games and group investigation model able to improvement learning outcome of hight school student.

76 FR 76603 - Improving American Indian and Alaska Native Educational Opportunities and Strengthening Tribal...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... college, careers, and productive and satisfying lives. My Administration is also committed to improving... and cultural traditions; offer a high-quality college education; provide career and technical education, job training, and other career-building programs; and often serve as anchors in some of the...

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fridley, David; Zheng, Nina; Zhou, Nan

Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labelingmore » programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other technical performance requirements in existing international programs in order to shed light on where Chinese programs currently stands and considerations for their 2010 programs.« less

The Creation of a Pediatric Hospital Medicine Dashboard: Performance Assessment for Improvement.

PubMed

Fox, Lindsay Anne; Walsh, Kathleen E; Schainker, Elisabeth G

2016-07-01

Leaders of pediatric hospital medicine (PHM) recommended a clinical dashboard to monitor clinical practice and make improvements. To date, however, no programs report implementing a dashboard including the proposed broad range of metrics across multiple sites. We sought to (1) develop and populate a clinical dashboard to demonstrate productivity, quality, group sustainability, and value added for an academic division of PHM across 4 inpatient sites; (2) share dashboard data with division members and administrations to improve performance and guide program development; and (3) revise the dashboard to optimize its utility. Division members proposed a dashboard based on PHM recommendations. We assessed feasibility of data collection and defined and modified metrics to enable collection of comparable data across sites. We gathered data and shared the results with division members and administrations. We collected quarterly and annual data from October 2011 to September 2013. We found comparable metrics across all sites for descriptive, productivity, group sustainability, and value-added domains; only 72% of all quality metrics were tracked in a comparable fashion. After sharing the data, we saw increased timeliness of nursery discharges and an increase in hospital committee participation and grant funding. PHM dashboards have the potential to guide program development, mobilize faculty to improve care, and demonstrate program value to stakeholders. Dashboard implementation at other institutions and data sharing across sites may help to better define and strengthen the field of PHM by creating benchmarks and help improve the quality of pediatric hospital care. Copyright © 2016 by the American Academy of Pediatrics.

Federal Workforce Quality: Measurement and Improvement

DTIC Science & Technology

1992-08-01

explicit standards of production and service quality . Assessment Tools 4 OPM should institutionalize its data collection program of longitudinal research...include data about quirements, should set explicit standards of various aspects of the model. That is, the production and service quality . effort...are the immediate consumers service quality are possible. of the products and services delivered, and still others in the larger society who have no

Slash X Honduras Caribbean pine hybrids: An overview of nursery production systems in Southeast Queensland, Australia

Treesearch

A. G. Baxter

2002-01-01

The Queensland Department of Primary Industries (DPI) Forestry has a requirement to produce 4.5 million trees per year for its plantation production program. This stock is raised at DPI Forestry nurseries in the southeast and far north of Queensland. To improve the productivity of its plantation estate, DPI Forestry has invested significant resources in the development...

Recent activities in flame retardancy of wood-plastic composites at the Forest Products Laboratory

Treesearch

Robert H. White; Nicole M. Stark; Nadir Ayrilmis

2011-01-01

For a variety of reasons, wood-plastic composite (WPC) products are widely available for some building applications. In applications such as outdoor decking, WPCs have gained a significant share of the market. As an option to improve the efficient use of wood fiber, the USDA Forest Service, Forest Products Laboratory (FPL), has an extensive research program on WPCs....

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.; Britt, J.; Birkmire, R.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., assisted by NREL's PV Manufacturing R&D program, have continued to advance CIGS production technology by developing trajectory-oriented predictive/control models, fault-tolerance control, control platform development, in-situ sensors, and process improvements. Modeling activities included developing physics-based and empirical models for CIGS and sputter-deposition processing, implementing model-based control, and applying predictive models to the construction of new evaporation sources and for control. Model-based control is enabled by implementing reduced or empirical models into a control platform. Reliability improvement activities include implementing preventive maintenance schedules; detecting failed sensors/equipment and reconfiguring to tinue processing; and systematicmore » development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which in turn have been enabled by control and reliability improvements due to this PV Manufacturing R&D program.« less

The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

PubMed

Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

2011-01-01

PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also significantly improved self-reported productivity. CONCLUSION. An effective intervention can change employee health risk status and activation both at the population level and at the individual high risk level. However, program engagement at the population level was low, indicating that additional promotional strategies, such as greater use of incentives, need to be examined. Less intensive coaching can be as effective as more intensive, albeit both interventions produced modest behavior change and retention in the consumer activation arm was most difficult. Further research is needed concerning recruitment and retention methods that will enable populations to realize the full potential of activated consumerism.

An Institutional Postdoctoral Research Training Program: Increasing Productivity of Postdoctoral Trainees

PubMed Central

Greco-Sanders, Linda; Laudenslager, Mark

2015-01-01

Objective Postdoctoral training is a critical stage of career development, and there has been a national effort to increase the consistency and quality of postdoctoral experiences. However, much of the effort has gone towards improving the process of training with less effort focusing on the content of what should be achieved during postdoctoral training, primarily because of a lack of empirical evidence in this area. One possible predictor of later scientific productivity is the number of peer-reviewed papers published during postdoctoral training. This manuscript reports on efforts to increase postdoctoral productivity. Method A single institution made postdoctoral training program changes designed to increase postdoctoral publication productivity. Postdoctoral publication productivity was compared between 114 trainees who matriculated prior to the changes and 20 trainees who matriculated after the changes. Results Postdoctoral trainees who matriculated after program changes had higher publication rates than postdoctoral trainees who matriculated prior to program changes [χ2(df= 15)=31.4, p=.002]. Four or more postdoctoral publications are associated with the greatest likelihood of sustained posttraining publications; postdocs matriculating after the program changes were more than twice as likely to have four or more publications (55 vs 26 %). Conclusions Postdoctoral program changes designed to increase postdoctoral publication rates can be successful. Defining, for each postdoc, a minimal postdoctoral publication rate may be an appropriate component of individualized development plans. PMID:25876090

An Institutional Postdoctoral Research Training Program: Increasing Productivity of Postdoctoral Trainees.

PubMed

Ross, Randal G; Greco-Sanders, Linda; Laudenslager, Mark

2016-04-01

Postdoctoral training is a critical stage of career development, and there has been a national effort to increase the consistency and quality of postdoctoral experiences. However, much of the effort has gone towards improving the process of training with less effort focusing on the content of what should be achieved during postdoctoral training, primarily because of a lack of empirical evidence in this area. One possible predictor of later scientific productivity is the number of peer-reviewed papers published during postdoctoral training. This manuscript reports on efforts to increase postdoctoral productivity. A single institution made postdoctoral training program changes designed to increase postdoctoral publication productivity. Postdoctoral publication productivity was compared between 114 trainees who matriculated prior to the changes and 20 trainees who matriculated after the changes. Postdoctoral trainees who matriculated after program changes had higher publication rates than postdoctoral trainees who matriculated prior to program changes [χ(2)(df = 15) = 31.4, p = .002]. Four or more postdoctoral publications are associated with the greatest likelihood of sustained posttraining publications; postdocs matriculating after the program changes were more than twice as likely to have four or more publications (55 vs 26%). Postdoctoral program changes designed to increase postdoctoral publication rates can be successful. Defining, for each postdoc, a minimal postdoctoral publication rate may be an appropriate component of individualized development plans.

Do Plastic Surgery Programs with Integrated Residencies or Subspecialty Fellowships Have Increased Academic Productivity?

PubMed Central

Duquette, Stephen P.; Valsangkar, Nakul P.; Sood, Rajiv; Socas, Juan; Zimmers, Teresa A.

2016-01-01

Background: The aim of this study was to evaluate the effect of different surgical training pathways on the academic performance of plastic surgical divisions. Methods: Eighty-two academic parameters for 338 plastic surgeons (PS), 1737 general surgeons (GS), and 1689 specialist surgeons (SS) from the top 55 National Institutes of Health (NIH)-funded academic departments of surgery were examined using data gathered from websites, SCOPUS, and NIH Research Portfolio Online Reporting Tools. Results: The median size of a PS division was 7 faculty members. PS faculty had lower median publications (P)/citations (C) (ie, P/C) than GS and SS (PS: 25/328, GS: 35/607, and SS: 40/713, P < 0.05). Publication and citation differences were observed at all ranks: assistant professor (PS: 11/101, GS: 13/169, and SS: 19/249), associate professor (PS: 33/342, GS: 40/691, and SS: 44/780), and professor (PS: 57/968, GS: 97/2451, and SS: 101/2376). PS had a lower percentage of faculty with current/former NIH funding (PS: 13.5%, GS: 22.8%, and SS: 25.1%, P < 0.05). Academic productivity for PS faculty was improved in integrated programs. P/C for PS faculty from divisions with traditional 3-year fellowships was 19/153, integrated 6-year residency was 25/329, and both traditional and 6-year programs were 27/344, P < 0.05. Craniofacial and hand fellowships increased productivity within the integrated residency programs. P/C for programs with a craniofacial fellowship were 32/364 and for those that additionally had a hand fellowship were 45/536. PS faculty at divisions with integrated training programs also had a higher frequency of NIH funding. Conclusions: PS divisions vary in degree of academic productivity. Dramatically improved scholarly output is observed with integrated residency training programs and advanced specialty fellowships. PMID:27014543

Highlights of contractor initiatives in quality enhancement and productivity improvement

NASA Technical Reports Server (NTRS)

1986-01-01

The NASA/Contractor Team efforts are presented as part of NASA's continuing effort to facilitate the sharing of quality and productivity improvement ideas among its contractors. This complilation is not meant to be a comprehensive review of contractor initiative nor does it necessarily express NASA's views. The submissions represent samples from a general survey, and were not edited by NASA. The efforts are examples of quality and productivity programs in private industry, and as such, highlight company efforts in individual areas. Topics range from modernization of equipment, hardware, and technology to management of human resources. Of particular interest are contractor initiatives which deal with measurement and evaluation data pertaining to quality and productivity performance.

Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. O. Hitzman; A. K. Stepp; D. M. Dennis

This research program is directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal is to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work is underway. Microbial cultures have been isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters withmore » cultures and conditions representative of oil reservoirs. Field pilot studies are underway.« less

Blast optimization for improved dragline productivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphreys, M.; Baldwin, G.

1994-12-31

A project aimed at blast optimization for large open pit coal mines is utilizing blast monitoring and analysis techniques, advanced dragline monitoring equipment, and blast simulation software, to assess the major controlling factors affecting both blast performance and subsequent dragline productivity. This has involved collaborative work between the explosives supplier, mine operator, monitoring equipment manufacturer, and a mining research organization. The results from trial blasts and subsequently monitored dragline production have yielded promising results and continuing studies are being conducted as part of a blast optimization program. It should be stressed that the optimization of blasting practices for improved draglinemore » productivity is a site specific task, achieved through controlled and closely monitored procedures. The benefits achieved at one location can not be simply transferred to another minesite unless similar improvement strategies are first implemented.« less

Recent Improvements to the U.S. Geological Survey Streamgaging Program...from the National Streamflow Information Program

USGS Publications Warehouse

Blanchard, Stephen F.

2007-01-01

INTRODUCTION The U.S. Geological Survey (USGS) established its first streamgage in 1889 on the Rio Grande River at Embudo, N.M. As the need for streamflow information increased, the USGS streamgaging network expanded to its current (2007) size of approximately 7,400 streamgages nationwide. The USGS streamgaging network, for most of its history, required mechanical measuring and recording devices to collect station data. Time-consuming and labor-intensive site visits were required to gather the recorded data for processing in the office. Eventually the data were published in paper reports. The USGS has progressively improved the streamgaging program by incorporating new technologies and techniques that streamline data collection, data delivery, and records processing while increasing the number and quality of product types that can be derived from the data. Improvements in recent decades that have expanded and broadened the streamgaging program are included the fact sheet.

Economic Evaluation of a Worksite Obesity Prevention and Intervention Trial among Hotel Workers in Hawaii

PubMed Central

Meenan, Richard T.; Vogt, Thomas M.; Williams, Andrew E.; Stevens, Victor J.; Albright, Cheryl L.; Nigg, Claudio

2010-01-01

Objective Economic evaluation of Work, Weight, and Wellness (3W), a two-year randomized trial of a weight loss program delivered through Hawaii hotel worksites. Methods Business case analysis from hotel perspective. Program resources were micro-costed (2008 dollars). Program benefits were reduced medical costs, fewer absences, and higher productivity. Primary outcome was discounted 24-month net present value (NPV). Results Control program cost $222K to implement over 24 months ($61 per participant), intervention program cost $1.12M ($334). Including overweight participants (body mass index > 25), discounted control NPV was −$217K; −$1.1M for intervention program. Presenteeism improvement of 50% combined with baseline 10% productivity shortfall required to generate positive 24-month intervention NPV. Conclusions 3W’s positive clinical outcomes did not translate into immediate economic benefit for participating hotels, although modest cost savings were observed in the trial’s second year. PMID:20061889

An Experimental Investigation of Computer Program Development Approaches and Computer Programming Metrics.

DTIC Science & Technology

1979-12-01

team progranming in reducing software dleveloup- ment costs relative to ad hoc approaches and improving software product quality relative to...are interpreted as demonstrating the advantages of disciplined team programming in reducing software development costs relative to ad hoc approaches...is due oartialty to the cost and imoracticality of a valiI experimental setup within a oroauct ion environment. Thus the question remains, are

Performance excellence: using Lean Six Sigma tools to improve the US Army behavioral health surveillance process, boost team morale, and maximize value to customers and stakeholders.

PubMed

Watkins, Eren Youmans; Kemeter, Dave M; Spiess, Anita; Corrigan, Elizabeth; Kateley, Keri; Wills, John V; Mancha, Brent Edward; Nichols, Jerrica; Bell, Amy Millikan

2014-01-01

Lean Six Sigma (LSS) is a process improvement, problem-solving methodology used in business and manufacturing to improve the speed, quality, and cost of products. LSS can also be used to improve knowledge-based products integral to public health surveillance. An LSS project by the Behavioral Social Health Outcomes Program of the Army Institute of Public Health reduced the number of labor hours spent producing the routine surveillance of suicidal behavior publication. At baseline, the total number of labor hours was 448; after project completion, total labor hours were 199. Based on customer feedback, publication production was reduced from quarterly to annually. Process improvements enhanced group morale and established best practices in the form of standard operating procedures and business rules to ensure solutions are sustained. LSS project participation also fostered a change in the conceptualization of tasks and projects. These results demonstrate that LSS can be used to inform the public health process and should be considered a viable method of improving knowledge-based products and processes.

Quantifying Preferences of Farmers and Veterinarians for National Animal Health Programs: The Example of Bovine Mastitis and Antimicrobial Usage in Switzerland

PubMed Central

van den Borne, Bart H. P.; van Soest, Felix J. S.; Reist, Martin; Hogeveen, Henk

2017-01-01

Bovine udder health in Switzerland is of a relatively high level. However, antimicrobial usage (AMU) seems high in comparison to other European countries also. A new udder health and AMU improvement program could improve this situation but it is uncertain whether there is support from the field. This study aimed to quantify preferences of dairy farmers and veterinarians for the start and design characteristics of a new national udder health and AMU improvement program in Switzerland. A total of 478 dairy farmers and 98 veterinarians completed an online questionnaire. Questions on their demographics and their mindset toward AMU were complemented with an adaptive choice-based conjoint interview, a novel conjoint analysis technique to quantify preferences of respondents for characteristics of a product for which multiple trade-off decisions must be made (here a bovine udder health and AMU improvement program). The conjoint analysis was followed by a multivariate multiple regression analysis to identify groups of respondents with different program design preferences. Logistic regression models were used to associate covariates with respondents’ preference to start a new udder health and AMU improvement program. Most farmers (55%) and veterinarians (62%) were in favor of starting a new voluntary udder health and AMU improvement program, but the program design preferences agreed moderately between the two stakeholder groups. Farmers preferred an udder health and AMU improvement program that did not contain a penalty system for high AMU, was voluntary for all dairy herds, and aimed to simultaneously improve udder health and reduce AMU. Veterinarians preferred a program that had the veterinary organization and the government taking the lead in program design decision making, did not contain a penalty system for high AMU, and aimed to simultaneously improve udder health and reduce AMU. Differences between groups of farmers and veterinarians concerning their start preference were identified. Also, the magnitude of various program design preferences changed for farmers with different opinions toward AMU. The information obtained from this study may support the decision-making process and the communication to the field afterward, when discussing national strategies to improve udder health and AMU in Switzerland. PMID:28626750

Overview of the Integrated Programs for Aerospace Vehicle Design (IPAD) project

NASA Technical Reports Server (NTRS)

Venneri, S. L.

1983-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of data base management technology and associated software for integrated company wide management of engineering and manufacturing information. Results to date on the IPAD project include an in depth documentation of a representative design process for a large engineering project, the definition and design of computer aided design software needed to support that process, and the release of prototype software to manage engineering information. This paper provides an overview of the IPAD project and summarizes progress to date and future plans.

Efficient Windows Collaborative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nils Petermann

2010-02-28

The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanismsmore » to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.« less

Data Availability in Appliance Standards and Labeling Program Development and Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romankiewicz, John; Khanna, Nina; Vine, Edward

2013-05-01

In this report, we describe the necessary data inputs for both standards development and program evaluation and perform an initial assessment of the availability and uncertainty of those data inputs in China. For standards development, we find that China and its standards and labeling program administrators currently has access to the basic market and technical data needed for conducting market and technology assessment and technological and economic analyses. Some data, such as shipments data, is readily available from the China Energy Label product registration database while the availability of other data, including average unit energy consumption, prices and design options,more » needs improvement. Unlike some other countries such as the United States, most of the necessary data for conducting standards development analyses are not publicly available or compiled in a consolidated data source. In addition, improved data on design and efficiency options as well as cost data (e.g., manufacturing costs, mark-ups, production and product use-phase costs) – key inputs to several technoeconomic analyses – are particularly in need given China’s unconsolidated manufacturing industry. For program evaluation, we find that while China can conduct simple savings evaluations on its incentive programs with the data it currently has available from the Ministry of Finance – the program administrator, the savings estimates produced by such an evaluation will carry high uncertainty. As such, China could benefit from an increase in surveying and metering in the next one to three years to decrease the uncertainty surrounding key data points such as unit energy savings and free ridership.« less

PRN 94-7: Label Improvement Program for the Revision of Use Directions for Commensal Rodenticides and Statement of the Agency's Policies on the Use of Rodenticide Bait Stations

EPA Pesticide Factsheets

This Notice requires registrants of certain pesticide products claimed to control commensal rodents and registered under FIFRA to revise the labeling of such products to bear certain statements concerning tamper-resistant bait stations.

Current research in Spain on walnut for wood production

Treesearch

Neus Alet& #224; ; Neus NO-VALUE

2004-01-01

The Department of Mediterranean Trees at the Institut de Recerca i Tecnologia Agroalimentaries (IRTA) in Spain initiated a research program in 1993 to examine the variability among walnut species for wood production and to establish orchards with improved selections. The main objective of the programme is to obtain superior Persian walnut (Juglans regia...

Basic Workplace Skills: The Foundation for Productivity Improvement. Workforce Brief #4.

ERIC Educational Resources Information Center

Bergman, Terri

Studies have confirmed that there is a strong correlation between employees' levels of basic workplace skills and their productivity in the workplace. Programs to build basic workplace skills have been shown to yield the following positive results: more instances of employees using reading and writing on the job, higher employee participation in…

Development of pulsed processes for the manufacture of solar cells

NASA Technical Reports Server (NTRS)

Minnucci, J. A.

1978-01-01

The results of a 1-year program to develop the processes required for low-energy ion implantation for the automated production of silicon solar cells are described. The program included: (1) demonstrating state-of-the-art ion implantation equipment and designing an automated ion implanter, (2) making efforts to improve the performance of ion-implanted solar cells to 16.5 percent AM1, (3) developing a model of the pulse annealing process used in solar cell production, and (4) preparing an economic analysis of the process costs of ion implantation.

Achieving Workplace Health through Application of Wellness Strategies

NASA Technical Reports Server (NTRS)

Robinson, Judith L.

2008-01-01

Purpose: 1) Understand and measure JSC workplace health: a) levels, sources, indicators & effects of negative, work-related stress; b) define leading indicators of emerging issues. 2 Provide linkage to outcomes: a) Focus application of wellness strategies & HR tools; b) Increase quality of work life and productivity. 3) Current effort will result in: a) Online assessment tool; b) Assessment of total JSC population (civil service & contractors); c) Application of mitigation tools and strategies. 4) Product of the JSC Employee Wellness Program. 5) Collaboration with Corporate Health Improvement Program/University of Arizona.

Programmatic Perspectives on Using `Rapid Prototyping Capability' for Water Management Applications Using NASA Products

NASA Astrophysics Data System (ADS)

Toll, D.; Friedl, L.; Entin, J.; Engman, E.

2006-12-01

The NASA Water Management Program addresses concerns and decision making related to water availability, water forecast and water quality. The goal of the Water Management Program Element is to encourage water management organizations to use NASA Earth science data, models products, technology and other capabilities in their decision support tools (DSTs) for problem solving. The goal of the NASA Rapid Prototyping Capability (RPC) is to speed the evaluation of these NASA products and technologies to improve current and future DSTs by reducing the time to access, configure, and assess the effectiveness of NASA products and technologies. The NASA Water Management Program Element partners with Federal agencies, academia, private firms, and may include international organizations. Currently, the NASA Water Management Program oversees eight application projects. However, water management is a very broad descriptor of a much larger number of activities that are carried out to insure safe and plentiful water supply for humans, industry and agriculture, promote environmental stewardship, and mitigate disaster such as floods and droughts. The goal of this presentation is to summarize how the RPC may further enhance the effectiveness of using NASA products for water management applications.

Fire and Flood - Extending NOAA Resources to the Classroom and the Citizen Science for Resilient and Informed Communities

NASA Astrophysics Data System (ADS)

Rogers, M. A.; Schranz, S.

2017-12-01

The Front Range of the Rocky Mountains in Colorado is a region particularly susceptable to both wildfire and flash flooding. As the population of Colorado continues to boom, it is critical to enhance the familiarity of resources that are available to the general public to understand, predict, and react to these dangers. At the Cooperative Institute for Research in the Atmosphere (CIRA), a NOAA Cooperative Institute in partnership with Colorado State University, several research products related fire and precipitation processes have been evaluated and developed for public use. As part of a pilot program under development at CIRA, extensive use of CIRA public-facing products are now being used as part of teacher professional development programs available to educators on an ad-hoc basis along the Front Range. These PD programs address state standards in weather prediction, hazard mitigation, and natural disaster awareness, and are designed to incorporate NOAA resources into the classroom, including use of satellite imagery products such as the Satellite Loop Interactive Data Explorer in Real-Time (SLIDER) package, fire weather products developed at the Earth Systems Research Laboratory, and others. Resilience-focused efforts are drawn from fire weather training resources developed for and used by NWS IMET teams, and state suggestions for fire and flood mitigation efforts, tying in these concepts to the basic science made observable using NOAA products. Teachers become proficient in using products as teaching elements in the classroom, with the end goal of improving both awareness and resiliency while improving the awareness of NOAA products. Citizen science programs also incorporate these elements in ad-hoc presentations to museum groups and through partnerships with citizen science networks along the Front Range. Subject-matter expert presentations to community members of local organizations such as the Soaring Eagle Ecology Center and the Anythink Library Network stimulates interest and helps build community connections to increase awareness about the dangers of fire flood and drought. Examples and lessons learned from both programs will be presented.

Fingerprinting of Materials: Technical Supplement

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1992-01-01

This supplement to the Guidelines for Maintaining a Chemical Fingerprinting Program has been developed to assist NASA personnel, contractors, and sub-contractors in defining the technical aspects and basic concepts which can be used in chemical fingerprinting programs. This material is not meant to be totally inclusive to all chemical fingerprinting programs, but merely to present current concepts. Each program will be tailored to meet the needs of the individual organizations using chemical fingerprinting to improve their quality and reliability in the production of aerospace systems.

A retrospective evaluation of the Perfecting Patient Care University training program for health care organizations.

PubMed

Morganti, Kristy Gonzalez; Lovejoy, Susan; Beckjord, Ellen Burke; Haviland, Amelia M; Haas, Ann C; Farley, Donna O

2014-01-01

This study evaluated how the Perfecting Patient Care (PPC) University, a quality improvement (QI) training program for health care leaders and clinicians, affected the ability of organizations to improve the health care they provide. This training program teaches improvement methods based on Lean concepts and principles of the Toyota Production System and is offered in several formats. A retrospective evaluation was performed that gathered data on training, other process factors, and outcomes after staff completed the PPC training. A majority of respondents reported gaining QI competencies and cultural achievements from the training. Organizations had high average scores for the success measures of "outcomes improved" and "sustainable monitoring" but lower scores for diffusion of QI efforts. Total training dosage was significantly associated with the measures of QI success. This evaluation provides evidence that organizations gained the PPC competencies and cultural achievements and that training dosage is a driver of QI success.

BEEC: An event generator for simulating the Bc meson production at an e+e- collider

NASA Astrophysics Data System (ADS)

Yang, Zhi; Wu, Xing-Gang; Wang, Xian-You

2013-12-01

The Bc meson is a doubly heavy quark-antiquark bound state and carries flavors explicitly, which provides a fruitful laboratory for testing potential models and understanding the weak decay mechanisms for heavy flavors. In view of the prospects in Bc physics at the hadronic colliders such as Tevatron and LHC, Bc physics is attracting more and more attention. It has been shown that a high luminosity e+e- collider running around the Z0-peak is also helpful for studying the properties of Bc meson and has its own advantages. For this purpose, we write down an event generator for simulating Bc meson production through e+e- annihilation according to relevant publications. We name it BEEC, in which the color-singlet S-wave and P-wave (cb¯)-quarkonium states together with the color-octet S-wave (cb¯)-quarkonium states can be generated. BEEC can also be adopted to generate the similar charmonium and bottomonium states via the semi-exclusive channels e++e-→|(QQ¯)[n]>+Q+Q¯ with Q=b and c respectively. To increase the simulation efficiency, we simplify the amplitude as compact as possible by using the improved trace technology. BEEC is a Fortran program written in a PYTHIA-compatible format and is written in a modular structure, one may apply it to various situations or experimental environments conveniently by using the GNU C compiler make. A method to improve the efficiency of generating unweighted events within PYTHIA environment is proposed. Moreover, BEEC will generate a standard Les Houches Event data file that contains useful information of the meson and its accompanying partons, which can be conveniently imported into PYTHIA to do further hadronization and decay simulation. Catalogue identifier: AEQC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEQC_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 114868 No. of bytes in distributed program, including test data, etc.: 963939 Distribution format: tar.gz Programming language: FORTRAN 77/90. Computer: Any computer with Fortran compiler, the program is tested with GNU Fortran compiler and Intel Fortran compiler. Operating system: UNIX, Linux and Windows. RAM: About 2.0 MB. Classification: 11.2. Nature of problem: Production of charmonium, (cb¯)-quarkonium and bottomonium via e+e- annihilation channel around the Z0 peak. Solution method: The production of heavy (QQ)-quarkonium (Q,Q‧=b,c) via e+e- annihilation are estimated by using the improved trace technology. The (QQ)-quarkonium in color-singlet 1S-wave state, 1P-wave state, and the color-octet 1S-wave states have been studied within the framework of non-relativistic QCD. The code with option can generate weighted and unweighted events conveniently, in particular, the unweighted events are generated by using an improved hit-and-miss approach so as to improve the generating efficiency. Restrictions: The generator is aimed at the production of double heavy quarkonium through e+e- annihilation at the Z0 peak. The considered processes are those that are associated with two heavy quark jets, which could provide sizable quarkonium events around the Z0 peak. Running time: It depends on which option one chooses to match PYTHIA when generating the heavy quarkonium events. Typically, for the production of the S-wave quarkonium states, if setting IDPP=2 (unweighted events), then it takes about 2 h on a 2.9 GHz AMD Athlon (tm) II×4 635 Processor machine to generate 105 events; if setting IDPP=3 (weighted events), it takes only ˜16 min to generate 105 events. For the production of the P-wave quarkonium states, the time will be almost one hundred times longer than the case of the S-wave quarkonium.

9 CFR 149.0 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.0 Purpose and scope. The Trichinae... slaughter facilities and other persons that handle or process swine from pork production sites that have...

Health information technology impact on productivity.

PubMed

Eastaugh, Steven R

2012-01-01

Managers work to achieve the greatest output for the least input effort, better balancing all factors of delivery to achieve the most with the smallest resource effort. Documentation of actual health information technology (HIT) cost savings has been elusive. Information technology and linear programming help to control hospital costs without harming service quality or staff morale. This study presents production function results from a study of hospital output during the period 2008-2011. The results suggest that productivity varies widely among the 58 hospitals as a function of staffing patterns, methods of organization, and the degree of reliance on information support systems. Financial incentives help to enhance productivity. Incentive pay for staff based on actual productivity gains is associated with improved productivity. HIT can enhance the marginal value product of nurses and staff, so that they concentrate their workday around patient care activities. The implementation of electronic health records (EHR) was associated with a 1.6 percent improvement in productivity.

Mining HIV protease cleavage data using genetic programming with a sum-product function.

PubMed

Yang, Zheng Rong; Dalby, Andrew R; Qiu, Jing

2004-12-12

In order to design effective HIV inhibitors, studying and understanding the mechanism of HIV protease cleavage specification is critical. Various methods have been developed to explore the specificity of HIV protease cleavage activity. However, success in both extracting discriminant rules and maintaining high prediction accuracy is still challenging. The earlier study had employed genetic programming with a min-max scoring function to extract discriminant rules with success. However, the decision will finally be degenerated to one residue making further improvement of the prediction accuracy difficult. The challenge of revising the min-max scoring function so as to improve the prediction accuracy motivated this study. This paper has designed a new scoring function called a sum-product function for extracting HIV protease cleavage discriminant rules using genetic programming methods. The experiments show that the new scoring function is superior to the min-max scoring function. The software package can be obtained by request to Dr Zheng Rong Yang.

An overview of the Douglas Aircraft Company Aeroelastic Design Optimization Program (ADOP)

NASA Technical Reports Server (NTRS)

Dodd, Alan J.

1989-01-01

From a program manager's viewpoint, the history, scope and architecture of a major structural design program at Douglas Aircraft Company called Aeroelastic Design Optimization Program (ADOP) are described. ADOP was originally intended for the rapid, accurate, cost-effective evaluation of relatively small structural models at the advanced design level, resulting in improved proposal competitiveness and avoiding many costly changes later in the design cycle. Before release of the initial version in November 1987, however, the program was expanded to handle very large production-type analyses.

Productivity in Pediatric Palliative Care: Measuring and Monitoring an Elusive Metric.

PubMed

Kaye, Erica C; Abramson, Zachary R; Snaman, Jennifer M; Friebert, Sarah E; Baker, Justin N

2017-05-01

Workforce productivity is poorly defined in health care. Particularly in the field of pediatric palliative care (PPC), the absence of consensus metrics impedes aggregation and analysis of data to track workforce efficiency and effectiveness. Lack of uniformly measured data also compromises the development of innovative strategies to improve productivity and hinders investigation of the link between productivity and quality of care, which are interrelated but not interchangeable. To review the literature regarding the definition and measurement of productivity in PPC; to identify barriers to productivity within traditional PPC models; and to recommend novel metrics to study productivity as a component of quality care in PPC. PubMed ® and Cochrane Database of Systematic Reviews searches for scholarly literature were performed using key words (pediatric palliative care, palliative care, team, workforce, workflow, productivity, algorithm, quality care, quality improvement, quality metric, inpatient, hospital, consultation, model) for articles published between 2000 and 2016. Organizational searches of Center to Advance Palliative Care, National Hospice and Palliative Care Organization, National Association for Home Care & Hospice, American Academy of Hospice and Palliative Medicine, Hospice and Palliative Nurses Association, National Quality Forum, and National Consensus Project for Quality Palliative Care were also performed. Additional semistructured interviews were conducted with directors from seven prominent PPC programs across the U.S. to review standard operating procedures for PPC team workflow and productivity. Little consensus exists in the PPC field regarding optimal ways to define, measure, and analyze provider and program productivity. Barriers to accurate monitoring of productivity include difficulties with identification, measurement, and interpretation of metrics applicable to an interdisciplinary care paradigm. In the context of inefficiencies inherent to traditional consultation models, novel productivity metrics are proposed. Further research is needed to determine optimal metrics for monitoring productivity within PPC teams. Innovative approaches should be studied with the goal of improving efficiency of care without compromising value. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Marketing complementary foods and supplements in Burkina Faso, Madagascar, and Vietnam: lessons learned from the Nutridev program.

PubMed

Bruyeron, Olivier; Denizeau, Mirrdyn; Berger, Jacques; Trèche, Serge

2010-06-01

Sustainable approaches to improving infant and young child feeding are needed. The Nutridev program worked in Vietnam, Madagascar, and Burkina Faso to test different strategies to improve complementary feeding using fortified products sold to families. To review the experiences of programs producing and marketing fortified complementary foods and to report on the feasibility of local production and marketing of fortified complementary foods to increase usage of high-quality foods among children of low-income families in a self-sustaining manner. Project documents, surveys of mothers, and production and sales reports were reviewed. Nutridev experience in Vietnam, Madagascar, and Burkina Faso demonstrates that it is possible to produce affordable, high-quality complementary foods and supplements locally in developing countries. Strategies to make products readily available to the targeted population and to convince this population to consume them yielded mixed results, varying greatly based on the strategy utilized and the context in which it was implemented. In several contexts, the optimal approach appears to be strengthening the existing food distribution network to sell complementary foods and supplements, with the implementation of a temporary promotion and nutrition education network in partnership with local authorities (e.g., health services) to increase awareness among families about the fortified complementary food product and optimal feeding practices. In urban areas, where the density of the population is high, design and implementation of specific networks very close to consumers seems to be a good way to combine economic sustainability and good consumption levels.

Framework for a National Testing and Evaluation Program Based Upon the National Stormwater Testing and Evaluation for Products and Practices (STEPP) Initiative (WERF Report INFR2R14)

EPA Science Inventory

Abstract:The National STEPP Program seeks to improve water quality by accelerating the effective implementation and adoption of innovative stormwater management technologies. Itwill attempt to accomplish this by establishing practices through highly reliable, and cost-effective S...

Factors determining the location of forest products firms

Treesearch

R.F. Fraser; F.M. Goode

1991-01-01

In the past decade there has been an increase in the number of intrastate, state and regional programs aimed at encouraging forest resource based economic development in northeastern USA. These programs were aimed at deriving economic benefits from the large volume of mature forest resources in the region. The improvement of rura1 communities by creating job...

Evaluating Students' Perception of Group Work for Mobile Application Development Learning, Productivity, Enjoyment and Confidence in Quality

ERIC Educational Resources Information Center

Powell, Loreen M.; Wimmer, Hayden

2016-01-01

Teaching programming and mobile application development concepts can be challenging for instructors; however, teaching an interdisciplinary class with varied skill levels amplifies this challenge. To encompass a broad range of students, many instructors have sought to improve their lessons and methods by experimenting with group/team programming.…

Nongraded Primary Programs: Possibilities for Improving Practice for Teachers. Practitioner Brief Number 4

ERIC Educational Resources Information Center

McIntyre, Ellen; Kyle, Diane

2002-01-01

In nongraded, multi-age classrooms, children have the opportunity to learn a great deal from their more proficient classmates. Children in multi-age, nongraded programs often learn that children differ, and they learn to assist each other in productive ways. The organizational scheme has the potential to remove much of the competition of…

The Microcomputer in the Small School District.

ERIC Educational Resources Information Center

Whitworth, Jerry

1985-01-01

Small school district administrators can use microcomputers to improve their management abilities and productivity through computerized accounting, electronic mail and online subscription services, and the use of integrated software programs. (MD)

Intelligent Vehicle Highway Systems Projects

DOT National Transportation Integrated Search

1993-02-01

The Intelligent Vehicle Highway Systems (IVHS) program consists of a range of advanced technologies and concepts which, in combination, can improve mobility and transportation productivity, enhance safety, maximize the use of existing transportation ...

Developing a Methodology for Eliciting Subjective Probability Estimates During Expert Evaluations of Safety Interventions: Application for Bayesian Belief Networks

NASA Technical Reports Server (NTRS)

Wiegmann, Douglas A.a

2005-01-01

The NASA Aviation Safety Program (AvSP) has defined several products that will potentially modify airline and/or ATC operations, enhance aircraft systems, and improve the identification of potential hazardous situations within the National Airspace System (NAS). Consequently, there is a need to develop methods for evaluating the potential safety benefit of each of these intervention products so that resources can be effectively invested to produce the judgments to develop Bayesian Belief Networks (BBN's) that model the potential impact that specific interventions may have. Specifically, the present report summarizes methodologies for improving the elicitation of probability estimates during expert evaluations of AvSP products for use in BBN's. The work involved joint efforts between Professor James Luxhoj from Rutgers University and researchers at the University of Illinois. The Rutgers' project to develop BBN's received funding by NASA entitled "Probabilistic Decision Support for Evaluating Technology Insertion and Assessing Aviation Safety System Risk." The proposed project was funded separately but supported the existing Rutgers' program.

SHARP's systems engineering challenge: rectifying integrated product team requirements with performance issues in an evolutionary spiral development acquisition

NASA Astrophysics Data System (ADS)

Kuehl, C. Stephen

2003-08-01

Completing its final development and early deployment on the Navy's multi-role aircraft, the F/A-18 E/F Super Hornet, the SHAred Reconnaissance Pod (SHARP) provides the war fighter with the latest digital tactical reconnaissance (TAC Recce) Electro-Optical/Infrared (EO/IR) sensor system. The SHARP program is an evolutionary acquisition that used a spiral development process across a prototype development phase tightly coupled into overlapping Engineering and Manufacturing Development (EMD) and Low Rate Initial Production (LRIP) phases. Under a tight budget environment with a highly compressed schedule, SHARP challenged traditional acquisition strategies and systems engineering (SE) processes. Adopting tailored state-of-the-art systems engineering process models allowd the SHARP program to overcome the technical knowledge transition challenges imposed by a compressed program schedule. The program's original goal was the deployment of digital TAC Recce mission capabilities to the fleet customer by summer of 2003. Hardware and software integration technical challenges resulted from requirements definition and analysis activities performed across a government-industry led Integrated Product Team (IPT) involving Navy engineering and test sites, Boeing, and RTSC-EPS (with its subcontracted hardware and government furnished equipment vendors). Requirements development from a bottoms-up approach was adopted using an electronic requirements capture environment to clarify and establish the SHARP EMD product baseline specifications as relevant technical data became available. Applying Earned-Value Management (EVM) against an Integrated Master Schedule (IMS) resulted in efficiently managing SE task assignments and product deliveries in a dynamically evolving customer requirements environment. Application of Six Sigma improvement methodologies resulted in the uncovering of root causes of errors in wiring interconnectivity drawings, pod manufacturing processes, and avionics requirements specifications. Utilizing the draft NAVAIR SE guideline handbook and the ANSI/EIA-632 standard: Processes for Engineering a System, a systems engineering tailored process approach was adopted for the accelerated SHARP EMD prgram. Tailoring SE processes in this accelerated product delivery environment provided unique opportunities to be technically creative in the establishment of a product performance baseline. This paper provides an historical overview of the systems engineering activities spanning the prototype phase through the EMD SHARP program phase, the performance requirement capture activities and refinement process challenges, and what SE process improvements can be applied to future SHARP-like programs adopting a compressed, evolutionary spiral development acquisition paradigm.

Solid State Lighting Program (Falcon)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meeks, Steven

2012-06-30

Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioningmore » which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated defect and DSA map overlay to failed die identified using end product probe test results. Results from our two year effort have led to “automated end-to-end defect detection” with full defect traceability and the ability to unambiguously correlate device killer defects to optically detected features and their point of origin within the process. Success of the program can be measured by yield improvements at our partner’s facilities and new product orders.« less

Investigate Methods of Improving Production Throughput in a Shipyard (The National Shipbuilding Research Program)

DTIC Science & Technology

1995-09-01

New Global Competition” ...10 “New Systems for Process Control and Product Costing ” . . . 11 “Performance Measurement Systems for the Future”, should...Selected Highlights: Page 53-World Class - Definition and applicable discussions. “Its clear that yesterdays cost systems don’t work in todays...Why conventional cost systems fail Indirect, No information about activities, Too late. Plant activities only, Inaccurate product costs , No customer

Identifying weaknesses in undergraduate programs within the context input process product model framework in view of faculty and library staff in 2014.

PubMed

Neyazi, Narges; Arab, Mohammad; Farzianpour, Freshteh; Mahmoudi, Mahmood

2016-06-01

Objective of this research is to find out weaknesses of undergraduate programs in terms of personnel and financial, organizational management and facilities in view of faculty and library staff, and determining factors that may facilitate program quality-improvement. This is a descriptive analytical survey research and from purpose aspect is an application evaluation study that undergraduate groups of selected faculties (Public Health, Nursing and Midwifery, Allied Medical Sciences and Rehabilitation) at Tehran University of Medical Sciences (TUMS) have been surveyed using context input process product model in 2014. Statistical population were consist of three subgroups including department head (n=10), faculty members (n=61), and library staff (n=10) with total population of 81 people. Data collected through three researcher-made questionnaires which were based on Likert scale. The data were then analyzed using descriptive and inferential statistics. Results showed desirable and relatively desirable situation for factors in context, input, process, and product fields except for factors of administration and financial; and research and educational spaces and equipment which were in undesirable situation. Based on results, researcher highlighted weaknesses in the undergraduate programs of TUMS in terms of research and educational spaces and facilities, educational curriculum, administration and financial; and recommended some steps in terms of financial, organizational management and communication with graduates in order to improve the quality of this system.

Online Learning Program Strategic Planning and Execution: Considering Goals, Benefits, Problems and Communities of Practice

ERIC Educational Resources Information Center

Sawyer, Edward A.; Howard, Caroline

2007-01-01

The nation's social agenda for improving education and training has converged with national economic forces (Hornbeck & Salamon, 1991). The emphasis on lifelong learning of the workforce through education, training and development, demands for ever-improving productivity and significant technological advancements have required new tools to…

Strengthening Collective Action to Improve Marketing Performance: Evidence from Farmer Groups in Central Africa

ERIC Educational Resources Information Center

Ochieng, Justus; Knerr, Beatrice; Owuor, George; Ouma, Emily

2018-01-01

Purpose: Several development organisations have implemented programs to enhance smallholder farmers' crop productivity and market access through collective action with mixed results. Therefore, this study examines the drivers of success of collective action initiatives as a pathway to improving farmers marketing performance using data from Rwanda…

75 FR 80786 - Solicitation of Applications for the Federal-State Marketing Improvement Program (FSMIP)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... funds a wide range of applied research projects that address barriers, challenges, and opportunities in... explore new market opportunities for U.S. food and agricultural products and to encourage research and... encourage research and innovation aimed at improving the efficiency and performance of the U.S. marketing...

75 FR 20111 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... the ``three heating products'') must be designed to ``achieve the maximum improvement in energy... and CO 2 savings are performed with different computer models, leading to different time frames for... of EPCA sets forth a variety of provisions designed to improve energy efficiency. Part A\\1\\ of Title...

78 FR 22850 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... million * As defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or... software continues to be modified via a pre-planned product improvement (P3I) program in order to improve its counter- countermeasure capabilities. No software source code or algorithms will be released. The...

LED Lighting in a Performing Arts Building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, N. J.; Kaye, S. M.; Coleman, P. M.

At the University of Florida in Gainesville, the DOE Solid-State Lighting GATEWAY program evaluated LED architectural and theatrical lighting in four academic/performance-related spaces within the Nadine McGuire Theatre + Dance Pavilion. Due to a wise choice of products and luminaire light distributions, the change brought significant quality improvements including improved controllability and color.

Genetic manipulation of miR156 for improvement of biomass production and forage quality in red clover

USDA-ARS?s Scientific Manuscript database

Red clover (Trifolium pratense) is an important forage legume in the United States. Improving forage quality and biomass yield is an important goal of forage breeding programs. Plant development, particularly the transition from vegetative to reproductive growth, is an important factor affecting bio...

International Comparison of Product Certification and Verification Methods for Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Romankiewicz, John; Fridley, David

2012-06-01

Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates andmore » energy savings potential.« less

Improved Real-Time Monitoring Using Multiple Expert Systems

NASA Technical Reports Server (NTRS)

Schwuttke, Ursula M.; Angelino, Robert; Quan, Alan G.; Veregge, John; Childs, Cynthia

1993-01-01

Monitor/Analyzer of Real-Time Voyager Engineering Link (MARVEL) computer program implements combination of techniques of both conventional automation and artificial intelligence to improve monitoring of complicated engineering system. Designed to support ground-based operations of Voyager spacecraft, also adapted to other systems. Enables more-accurate monitoring and analysis of telemetry, enhances productivity of monitoring personnel, reduces required number of such personnel by performing routine monitoring tasks, and helps ensure consistency in face of turnover of personnel. Programmed in C language and includes commercial expert-system software shell also written in C.

Equipment upgrades for the Pu-238 program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Congdon, J.W.; Stephens, W.D.; Marra, J.E.

1990-02-14

Much of the equipment and instrumentation in the Pu-238 production facilities is more than 15 years old. Significant improvements have been made in the available instrumentation, in particular, due to the application of microprocessors and lasers. The Actinide Technology Section of SRL has selected and is in the process of evaluating several state-of-the-art instruments which have potential applications in the Pu-238 program. The ease of operation and the accuracy of the instruments have been improved and, in most cases, the cost of the instruments have decreased. 5 refs.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

PubMed

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

LIEKKI -- Combustion and gasification research in Finland 1988--1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hupa, M.; Matinlinna, J.

1996-12-31

The objective of the Combustion and Gasification Research Program LIEKKI is to develop environmentally sound energy production techniques that are based on combustion and/or gasification. The research supports equipment manufacturers in Finland as they develop and improve their top export products, such as the fluidized bed boilers, black liquor recovery boilers, and heavy diesel power plants. The research is also heavily focused on new techniques not yet on the market, ones with higher efficiency of electricity production and, simultaneously, significantly simpler emission control systems. The most important concepts here include combustors or gasifiers based on fluidized bed technology at elevatedmore » pressures. At present the LIEKKI program includes 49 research projects and it connects some 150 scientists and research engineers in the universities and research centers of Finland. The overall annual budget of the program has been around 10 Mill. USD, co-funded by the industry and the government agency TEKES (Technology Development Centre) in Finland. The program is coordinated by Aabo Akademi University in Turku, Finland.« less

Year in review 2006

DOT National Transportation Integrated Search

2007-01-01

Improving the productivity and mobility of the national highway transportation system are key goals of the Federal Highway Administration (FHWA). During 2006, FHWA's Long-Term Pavement Performance (LTPP) program worked toward these goals through its ...

Year in review : 2005.

DOT National Transportation Integrated Search

2006-01-01

Improving the productivity and mobility of the national highway transportation system are : key goals of the Federal Highway Administration (FHWA). During 2005, FHWAs : Long-Term Pavement Performance (LTPP) program continued to work toward these g...

THE CDF ARCHIVE: HERSCHEL PACS AND SPIRE SPECTROSCOPIC DATA PIPELINE AND PRODUCTS FOR PROTOSTARS AND YOUNG STELLAR OBJECTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, Joel D.; Yang, Yao-Lun; II, Neal J. Evans

2016-03-15

We present the COPS-DIGIT-FOOSH (CDF) Herschel spectroscopy data product archive, and related ancillary data products, along with data fidelity assessments, and a user-created archive in collaboration with the Herschel-PACS and SPIRE ICC groups. Our products include datacubes, contour maps, automated line fitting results, and best 1D spectra products for all protostellar and disk sources observed with PACS in RangeScan mode for two observing programs: the DIGIT Open Time Key Program (KPOT-nevans-1 and SDP-nevans-1; PI: N. Evans), and the FOOSH Open Time Program (OT1-jgreen02-2; PI: J. Green). In addition, we provide our best SPIRE-FTS spectroscopic products for the COPS Open Time Program (OT2-jgreen02-6;more » PI: J. Green) and FOOSH sources. We include details of data processing, descriptions of output products, and tests of their reliability for user applications. We identify the parts of the data set to be used with caution. The resulting absolute flux calibration has improved in almost all cases. Compared to previous reductions, the resulting rotational temperatures and numbers of CO molecules have changed substantially in some sources. On average, however, the rotational temperatures have not changed substantially (<2%), but the number of warm (T{sub rot} ∼ 300 K) CO molecules has increased by about 18%.« less

The CDF Archive: Herschel PACS and SPIRE Spectroscopic Data Pipeline and Products for Protostars and Young Stellar Objects

NASA Astrophysics Data System (ADS)

Green, Joel D.; Yang, Yao-Lun; Evans, Neal J., II; Karska, Agata; Herczeg, Gregory; van Dishoeck, Ewine F.; Lee, Jeong-Eun; Larson, Rebecca L.; Bouwman, Jeroen

2016-03-01

We present the COPS-DIGIT-FOOSH (CDF) Herschel spectroscopy data product archive, and related ancillary data products, along with data fidelity assessments, and a user-created archive in collaboration with the Herschel-PACS and SPIRE ICC groups. Our products include datacubes, contour maps, automated line fitting results, and best 1D spectra products for all protostellar and disk sources observed with PACS in RangeScan mode for two observing programs: the DIGIT Open Time Key Program (KPOT_nevans1 and SDP_nevans_1; PI: N. Evans), and the FOOSH Open Time Program (OT1_jgreen02_2; PI: J. Green). In addition, we provide our best SPIRE-FTS spectroscopic products for the COPS Open Time Program (OT2_jgreen02_6; PI: J. Green) and FOOSH sources. We include details of data processing, descriptions of output products, and tests of their reliability for user applications. We identify the parts of the data set to be used with caution. The resulting absolute flux calibration has improved in almost all cases. Compared to previous reductions, the resulting rotational temperatures and numbers of CO molecules have changed substantially in some sources. On average, however, the rotational temperatures have not changed substantially (<2%), but the number of warm (Trot ∼ 300 K) CO molecules has increased by about 18%.

Evaluation of empowerment program to increase production capacity of fishery processing business in Semarang City, Indonesia

NASA Astrophysics Data System (ADS)

Swastawati, F.; Roessali, W.; Wijayanti, I.; Anggo, A. D.

2018-01-01

This study aims to evaluate the empowerment program to increase the production capacity of fishery product processing. Empowerment program was the implementation and utilization of science and technology in the area (IPTEKDA) LIPI Indonesia for Higher Education. Activity carried out in 2016 on fish processing industry “Lumintu Group”. Implementation of activities includes the transfer of technology to increase production capacity, business capital assistance in the form of production equipment, production assistance, and business management. This study uses qualitative, descriptive analysis, data collection with observation, interviews, and questionnaires. The results showed that the total number of active members was 24 people, 50% of the members specially cultivated the smoked fish that is the type of Catfish (Arius thalassinus) and Stingray (Dasyatis sp), while 45.83% of members processed boneless milkfish, and 4,17% produce salted fish. Increased average production scale of 31.82% in smoked fish business, 12.4% in boneless milkfish and 38.89% in salted fish business. Willingness to return capital in the good category, meaning that all members were able to carry out the schedule of relative payback on time. Approximately 83.3% of the group members felt that the program that followed had greatly assisted in increasing the scale of business but hoped to improve skills in terms of processing and marketing.

Iterative design, implementation and evaluation of a supplemental feeding program for underweight children ages 6-59 months in Western Uganda.

PubMed

Jilcott, Stephanie B; Ickes, Scott B; Ammerman, Alice S; Myhre, Jennifer A

2010-03-01

In this paper we describe the development, implementation, evaluation, and subsequent improvements of a supplemental feeding program that provides community-based care to underweight children in a rural East African setting, using a locally-sourced and produced ready-to-use food (RUF). Production teams were trained to grind soybeans and groundnuts (peanuts), which were then mixed with moringa oleifera leaf powder to form an energy-dense supplemental food, designed for use as an RUF. Eligible children (based on low weight-for-age or mid-upper-arm circumference < 12 cm) received RUF of approximately 682 kcal per day for five weeks. Weekly growth monitoring and caregiver education were provided by trained health center staff and community volunteers. The program was evaluated by examining RUF nutrient composition, weight gain velocity, and qualitative data from key-informant interviews and home feeding observations. Locally-produced RUF had similar energy density but higher protein content than commercial RUTF (ready-to-use therapeutic food). Mean weight gain of children was 2.5 g/kg/day (range 0.9-6.0). Feeding observations revealed that caregivers were diluting the RUF fed to children. Production team members desired increased financial compensation for their work but were enthusiastic about the program as helpful to malnourished children. Locally-produced RUF is a promising strategy for community-based care of moderately malnourished children. Through the production team's entrepreneurship, a small business was formed, whereby financial incentives encouraged continued RUF production. Future efforts are needed to educate caregivers on correct RUF use and improve commercial viability in local markets.

The role of NASA's Water Resources applications area in improving access to water quality-related information and water resources management

NASA Astrophysics Data System (ADS)

Lee, C. M.

2016-02-01

The NASA Applied Sciences Program plays a unique role in facilitating access to remote sensing-based water information derived from US federal assets towards the goal of improving science and evidence-based decision-making in water resources management. The Water Resources Application Area within NASA Applied Sciences works specifically to develop and improve water data products to support improved management of water resources, with partners who are faced with real-world constraints and conditions including cost and regulatory standards. This poster will highlight the efforts and collaborations enabled by this program that have resulted in integration of remote sensing-based information for water quality modeling and monitoring within an operational context.

The role of NASA's Water Resources applications area in improving access to water quality-related information and water resources management

NASA Astrophysics Data System (ADS)

Lee, C. M.

2016-12-01

The NASA Applied Sciences Program plays a unique role in facilitating access to remote sensing-based water information derived from US federal assets towards the goal of improving science and evidence-based decision-making in water resources management. The Water Resources Application Area within NASA Applied Sciences works specifically to develop and improve water data products to support improved management of water resources, with partners who are faced with real-world constraints and conditions including cost and regulatory standards. This poster will highlight the efforts and collaborations enabled by this program that have resulted in integration of remote sensing-based information for water quality modeling and monitoring within an operational context.

Design of China Leading Energy Efficiency Program (LEP) for equipment and appliances and comparative study of international experience on super-efficient products

NASA Astrophysics Data System (ADS)

Liang, Xiuying; Zhu, Chunyan

2017-11-01

With rising global emphasizes on climate change and sustainable development, how to accelerate the transformation of energy efficiency has become an important question. Designing and implementing energy-efficiency policies for super-efficient products represents an important direction to achieve breakthroughs in the field of energy conservation. On December 31, 2014, China’s National Development and Reform Commission (NDRC) jointly six other ministerial agencies launched China Leading Energy Efficiency Program (LEP), which identifies top efficiency models for selected product categories. LEP sets the highest energy efficiency benchmark. Design of LEP took into consideration of how to best motivate manufacturers to accelerate technical innovation, promote high efficiency products. This paper explains core elements of LEP, such as objectives, selection criteria, implementation method and supportive policies. It also proposes recommendations to further improve LEP through international policy comparison with Japan’s Top Runner Program, U.S. Energy Star Most Efficient, and SEAD Global Efficiency Medal.

Balancing the Needs of China's Wetland Conservation and Rice Production.

PubMed

Chen, Hongjun; Wang, Guoping; Lu, Xianguo; Jiang, Ming; Mendelssohn, Irving A

2015-06-02

China's rice policy for protecting paddy fields and constructing rice production bases is in conflict with its wetland conservation strategy. The policy will increase the rice planting area, the loss of remaining wetlands, and environmental pollution, with intensive application of fertilizers and heavy use of pesticides. The key to resolving this conflict is to bring rice production in compliance with wetland conservation and sustainable agriculture. An operational, sound regulatory program is needed to improve China's wetland conservation. Using wetland conservation in the US as an example, we argue that more effective technical guidelines for wetland inventory and monitoring are necessary to support the implementation of the regulatory program. Agricultural conservation programs are also needed to stop further wetland loss from agricultural usages. An ecoagricultural strategy and practice should be adopted for rice production to reduce pollution and loss of remaining wetlands. Agroecological engineering tools can be used to reduce the impacts of nutrient- and pesticide-enriched agricultural runoff to wetlands.

[The significance of meat quality in marketing].

PubMed

Kallweit, E

1994-07-01

Food quality in general and meat quality in particular are not only evaluated by means of objective quality traits but the entire production process is gaining more attention by the modern consumer. Due to this development quality programs were developed to define the majority of the processes in all production and marketing steps which are again linked by contracts. Not all of these items are quality relevant, but are concessions to ethic principles (animal welfare etc.). This is demonstrated by the example of Scharrel-pork production. The price differentiation at the pork market is still influenced predominantly by quantitative carcass traits. On the European market quality programs still are of minor significance. Premiums which are paid for high quality standards are more or less compensated by higher production costs and lower lean meat percentages, which must be expected in stress susceptible strains. The high efforts to establish quality programs, however, help to improve the quality level in general, and secure the market shares for local producers.

Regional softwood sawmill processing variables as influenced by productive capacity

Treesearch

P. H. Steele; F. G. Wagner; K. E. Skog

The relationship between annual softwood sawmill production and lumber processing variables was examined using data from Sawmill Improvement Program (SIP) studies of 650 softwood mills. The variables were lumber recovery factor (LRF); headrig and resaw kerf width; total sawing variation, rough green size, and oversizing-undersizing for 4/4 and 8/4 lumber; planer...

An assessment of educational needs in the Alaskan forest products industry.

Treesearch

Jon Thomas; Eric Hansen; Allen M. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

An assessment of educational needs in the Alaskan forest products industry

Treesearch

J. Thomas; E. Hansen; A. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

ERIC Educational Resources Information Center

Harden, Samantha M.; You, Wen; Almeida, Fabio A.; Hill, Jennie L.; Linnan, Laura A.; Allen, Kacie C.; Estabrooks, Paul A.

2015-01-01

Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health…

Understanding Vocational Education and Training, Productivity and Workforce Participation: An Issues Paper

ERIC Educational Resources Information Center

Evesson, Justine; Bretherton, Tanya; Buchanan, John; Rafferty, Mike; Considine, Gillian

2009-01-01

This issues paper reports on the findings from the first year of a three-year program of research by the University of Sydney's Workplace Research Centre. The overarching aim of the research is to investigate how, if at all, vocational education and training can make a difference in improving productivity and workforce participation. The authors…

Community based rehabilitation: Does it really improve the level of productivity among persons with physical disabilities?

PubMed

Moniruzzaman; Saha, Palash Chandra; Habib, Md Monjurul

2015-01-01

The Community Based Rehabilitation (CBR) is a common approach to work with disable people to improve their quality of life by improving the level of productivity and integrating them into society. But the effectiveness of CBR varies by country to country. The aim of the study was to find out whether CBR programs really improved the level of productivity among persons with physical disabilities. A cross-sectional study was conducted among equal number of respondents (n=51) from each CBR coverage and non-coverage areas from two different upazilla (sub-districts) located 40 km away from the capital city of Bangladesh. Respondents were selected purposively and data were collected by face to face interviews. Willer's (1994) version of the Community Integration Questionnaire (CIQ) was used to measure the level of productivity among adult with physical disabilities. The mean score of total productivity integration in CBR coverage and non-coverage areas were 4.3 ± 2.4 and 4.5 ± 2.2 respectively. This difference was statistically non-significant (p=0.602).The levels of productivity integration between CBR coverage and non-coverage areas varied only 2-4% (p=0.793). The mean score of productivity integration and levels of productivity were not different significantly in CBR coverage and non-coverage areas.

Increasing the use of evaluation data collection in an EPO program

NASA Astrophysics Data System (ADS)

Taber, J. J.; Bohon, W.; Bravo, T. K.; Dordevic, M.; Dorr, P. M.; Hubenthal, M.; Johnson, J. A.; Sumy, D.; Welti, R.; Davis, H. B.

2017-12-01

Over the past two years, the Incorporated Research Institutions for Seismology Education and Public Outreach (EPO) program has sought to increase the evaluation rigor of its programs and products. Specifically we sought to make evaluation an integral part of our work; enabling staff to demonstrate why we do the activities we do, enhancing the impact or our products/programs, and empowering staff to make evidence-based claims. The Collaborative Impact Analysis Method (Davis and Scalice, 2015) was selected as it allowed us to combine staff's knowledge of programs, audiences and content with the expertise of an outside evaluation expert, through consultations and a qualitative rubric assessing the initial state of each product/program's evaluation. Staff then developed action plans to make improvements to the programs over time. A key part of the initial action plans has been the collection and analysis of new evaluation data. The most frequently used tools were surveys as they were relatively straightforward to implement and analyze, and could be adapted for different situations. Examples include: brand awareness, value of booth interactions, assessing community interest in a data app, and user surveys of social media and specific web pages. Other evaluation activities included beta testing of new software, and interviews with students and faculty involved in summer field experiences. The surveys have allowed us to document increased impact in some areas, to improve the usability of products and activities, and to provide baseline impact data. The direct involvement of staff in the process has helped staff appreciate the value of evaluation, but there are also challenges to this approach. Since many of the surveys are developed and conducted by EPO staff, rather than being primarily handled by the evaluator, the process takes considerably more staff time to implement. We are still determining how to best manage and present the data and analysis; our current approach is to post evaluation reports on our EPO website so that other groups may be able to benefit from our evaluation results. Davis, H. & Scalice, D. (2015). Evaluate the Impact of your Education and Outreach Program Using the Quantitative Collaborative Impact Analysis Method. Abstract ED53D-0871, 2015 Fall Meeting, AGU.

Simulated selection responses for breeding programs including resistance and resilience to parasites in Creole goats.

PubMed

Gunia, M; Phocas, F; Gourdine, J-L; Bijma, P; Mandonnet, N

2013-02-01

The Creole goat is a local breed used for meat production in Guadeloupe (French West Indies). As in other tropical countries, improvement of parasite resistance is needed. In this study, we compared predicted selection responses for alternative breeding programs with or without parasite resistance and resilience traits. The overall breeding goal included traits for production, reproduction, and parasite resilience and resistance to ensure a balanced selection outcome. The production traits were BW and dressing percentage (DP). The reproduction trait was fertility (FER), which was the number of doe kiddings per mating. The resistance trait was worm fecal egg count (FEC), which is a measurement of the number of gastro-intestinal parasite eggs found in the feces. The resilience trait was the packed cell volume (PCV), which is a measurement of the volume of red blood cells in the blood. Dressing percentage, BW, and FEC were measured at 11 mo of age, which is the mating or selling age. Fertility and PCV were measured on females at each kidding period. The breeding program accounting for the overall breeding goal and a selection index including all traits gave annual selection responses of 800 g for BW, 3.75% for FER, 0.08% for DP, -0.005 ln(eggs/g) for FEC, and 0.28% for PCV. The expected selection responses for BW and DP in this breeding program were reduced by 2% and 6%, respectively, compared with a breeding program not accounting for FEC and PCV. The overall breeding program, proposed for the Creole breed, offers the best breeding strategy in terms of expected selection responses, making it possible to improve all traits together. It offers a good balance between production and adaptation traits and may present some interest for the selection of other goat breeds in the tropics.

"Employment and arthritis: making it work" a randomized controlled trial evaluating an online program to help people with inflammatory arthritis maintain employment (study protocol).

PubMed

Carruthers, Erin C; Rogers, Pamela; Backman, Catherine L; Goldsmith, Charles H; Gignac, Monique A; Marra, Carlo; Village, Judy; Li, Linda C; Esdaile, John M; Lacaille, Diane

2014-07-21

Arthritis and musculoskeletal conditions are the leading cause of long-term work disability (WD), an outcome with a major impact on quality of life and a high cost to society. The importance of decreased at-work productivity has also recently been recognized. Despite the importance of these problems, few interventions have been developed to reduce the impact of arthritis on employment. We have developed a novel intervention called "Making It Work", a program to help people with inflammatory arthritis (IA) deal with employment issues, prevent WD and improve at-work productivity. After favorable results in a proof-of-concept study, we converted the program to a web-based format for broader dissemination and improved accessibility. The objectives of this study are: 1) to evaluate in a randomized controlled trial (RCT) the effectiveness of the program at preventing work cessation and improving at-work productivity; 2) to perform a cost-utility analysis of the intervention. 526 participants with IA will be recruited from British Columbia, Alberta, and Ontario in Canada. The intervention consists of a) 5 online group sessions; b) 5 web-based e-learning modules; c) consultations with an occupational therapist for an ergonomic work assessment and a vocational rehabilitation counselor. Questionnaires will be administered online at baseline and every 6 months to collect information about demographics, disease measures, costs, work-related risk factors for WD, quality of life, and work outcomes. Primary outcomes include at-work productivity and time to work cessation of > 6 months for any reason. Secondary outcomes include temporary work cessation, number of days missed from work per year, reduction in hours worked per week, quality adjusted life year for the cost utility analysis, and changes from baseline in employment risk factors. Analysis of Variance will evaluate the intervention's effect on at-work productivity, and multivariable Cox regression models will estimate the risk of work cessation associated with the intervention after controlling for risk factors for WD and other important predictors imbalanced at baseline. This program fills an important gap in arthritis health services and addresses an important and costly problem. Knowledge gained from the RCT will be useful to health care professionals, policy planners and arthritis stakeholders. ClinicalTrials.gov NCT01852851; registered April 13, 2012; first participant randomized on July 6, 2013.

Unisys' experience in software quality and productivity management of an existing system

NASA Technical Reports Server (NTRS)

Munson, John B.

1988-01-01

A summary of Quality Improvement techniques, implementation, and results in the maintenance, management, and modification of large software systems for the Space Shuttle Program's ground-based systems is provided.

Establishment of a Graduate Certificate Program in Biobased Industrial Products – Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

John R. Schlup

2005-11-04

A certificate of graduate studies in Biobased Industrial Products is to be established at Kansas State University (KSU) along with the development of a similar program at Pittsburg State University, Pittsburg, KS. At KSU, the program of study will be coordinated through the steering committee of the Agricultural Products Utilization Forum (APUF); the certificate of graduate studies will be awarded through the Graduate School of Kansas State University. This certificate will establish an interdisciplinary program of study that will: (1) ensure participating students receive a broad education in several disciplines related to Biobased Industrial Products, (2) provide a documented coursemore » of study for students preferring a freestanding certificate program, and (3) provide a paradigm shift in student awareness away from petroleum-based feedstocks to the utilization of renewable resources for fuels and chemical feedstocks. The academic program described herein will accomplish this goal by: (1) providing exposure to several academic disciplines key to Biobased Industrial Products; (2) improving university/industry collaboration through an external advisory board, distance learning opportunities, and student internships; (3) expanding the disciplines represented on the students' supervisory committee; (4) establishing a seminar series on Biobased Industrial Products that draws upon expert speakers representing several disciplines; and (5) increasing collaboration between disciplines. Numerous research programs emphasizing Biobased Industrial Products currently exist at KSU and PSU. The certificate of graduate studies, the emphasis on interdisciplinary collaboration within the students? thesis research, the proposed seminar series, and formation of an industrial advisory board will: (1) provide an interdisciplinary academic experience that spans several departments, four colleges, four research centers, and two universities; (2) tangibly promote collaboration between KSU and PSU; (3) catalyze involvement of plant geneticists with researchers active in the development and utilization of biobased industrial products; and, (4) promote university/industry collaboration.« less

The voice of the customer--Part 2: Benchmarking battery chargers against the Consumer's Ideal Product.

PubMed

Bauer, S M; Lane, J P; Stone, V I; Unnikrishnan, N

1998-01-01

The Rehabilitation Engineering Research Center on Technology Evaluation and Transfer is exploring how the end users of assistive technology devices define the ideal device. This work is called the Consumer Ideal Product program. In this work, end users identify and establish the importance of a broad range of product design features, along with the related product support and service provided by manufacturers and vendors. This paper describes a method for systematically transforming end-user defined requirements into a form that is useful and accessible to product designers, manufacturers, and vendors. In particular, product requirements, importance weightings, and metrics are developed from the Consumer Ideal Product battery charger outcomes. Six battery charges are benchmarked against these product requirements using the metrics developed. The results suggest improvements for each product's design, service, and support. Overall, the six chargers meet roughly 45-75% of the ideal product's requirements. Many of the suggested improvements are low-cost changes that, if adopted, could provide companies a competitive advantage in the marketplace.

Health promotion program: a resident well-being study.

PubMed

Watson, David T; Long, William J; Yen, David; Pichora, David R

2009-01-01

Surgical training places unique stresses on residents that can lead to decreased levels of presenteeism. We hypothesized that presenteeism levels could be positively influenced by improving workplace hygiene. a cohort of surgical residents was asked to complete the Stanford Presenteeism Scale: Health Status and Employee Productivity (SPS-6) questionnaire before, and one year after the implementation of a workplace health promotion program. Twenty-six of thirty-three residents responded to the initial survey and reported a mean SPS-6 score of 17.3 +/- 4.5, well below population normative value of 24 +/- 3 (p < 0.0001). At one-year post intervention 25 of 32 residents responded, reporting a mean SPS-6 score of 18.3+/- 4.6. The mean SPS-6 score improved by 1.2+/- 3.8 (p = 0.35). Subgroup analysis showed a trend toward improved SPS-6 in those who participated in the health promotion program (p = 0.15) and a significant difference when junior residents were compared to seniors (p = 0.034). Overall, results were limited by our small sample size. Presenteeism scores for surgical residents at our institution are well below population values. Use of validated tools such as the SPS-6 may allow for more objective analysis and decision making when planning for resident education and workload. PRESENTEEISM: the ability while on the job to produce quality work at maximum productivity. DECREASED PRESENTEEISM: a state of decreased productivity and below-normal work quality related to health/workplace distracters.

Propulsion system-flight control integration-flight evaluation and technology transition

NASA Technical Reports Server (NTRS)

Burcham, Frank W., Jr.; Gilyard, Glenn B.; Myers, Lawrence P.

1990-01-01

Integration of propulsion and flight control systems and their optimization offering significant performance improvement are assessed. In particular, research programs conducted by NASA on flight control systems and propulsion system-flight control interactions on the YF-12 and F-15 aircraft are addressed; these programs have demonstrated increased thrust, reduced fuel consumption, increased engine life, and improved aircraft performance. Focus is placed on altitude control, speed-Mach control, integrated controller design, as well as flight control systems and digital electronic engine control. A highly integrated digital electronic control program is analyzed and compared with a performance seeking control program. It is shown that the flight evaluation and demonstration of these technologies have been a key part in the transition of the concepts to production and operational use on a timely basis.

Genomic selection signatures in sheep from the Western Pyrenees.

PubMed

Ruiz-Larrañaga, Otsanda; Langa, Jorge; Rendo, Fernando; Manzano, Carmen; Iriondo, Mikel; Estonba, Andone

2018-03-22

The current large spectrum of sheep phenotypic diversity results from the combined product of sheep selection for different production traits such as wool, milk and meat, and its natural adaptation to new environments. In this study, we scanned the genome of 25 Sasi Ardi and 75 Latxa sheep from the Western Pyrenees for three types of regions under selection: (1) regions underlying local adaptation of Sasi Ardi semi-feral sheep, (2) regions related to a long traditional dairy selection pressure in Latxa sheep, and (3) regions experiencing the specific effect of the modern genetic improvement program established for the Latxa breed during the last three decades. Thirty-two selected candidate regions including 147 annotated genes were detected by using three statistical parameters: pooled heterozygosity H, Tajima's D, and Wright's fixation index F st . For Sasi Ardi sheep, chromosomes Ovis aries (OAR)4, 6, and 22 showed the strongest signals and harbored several candidate genes related to energy metabolism and morphology (BBS9, ELOVL3 and LDB1), immunity (NFKB2), and reproduction (H2AFZ). The major genomic difference between Sasi Ardi and Latxa sheep was on OAR6, which is known to affect milk production, with highly selected regions around the ABCG2, SPP1, LAP3, NCAPG, LCORL, and MEPE genes in Latxa sheep. The effect of the modern genetic improvement program on Latxa sheep was also evident on OAR15, on which several olfactory genes are located. We also detected several genes involved in reproduction such as ESR1 and ZNF366 that were affected by this selection program. Natural and artificial selection have shaped the genome of both Sasi Ardi and Latxa sheep. Our results suggest that Sasi Ardi traits related to energy metabolism, morphological, reproductive, and immunological features have been under positive selection to adapt this semi-feral sheep to its particular environment. The highly selected Latxa sheep for dairy production showed clear signatures of selection in genomic regions related to milk production. Furthermore, our data indicate that the selection criteria applied in the modern genetic improvement program affect immunity and reproduction traits.

Perceptions of households on purpose of keeping, trait preference, and production constraints for selected goat types in Ethiopia.

PubMed

Tadesse, Dereje; Urge, Mengistu; Animut, Getachew; Mekasha, Yoseph

2014-02-01

A study was carried out to understand the needs and perception of goat keepers in selected areas of Ethiopia in order to identify the breeding objectives, traits of preference, and production constraints that may be required in designing improvement programs. The study was conducted in three districts (Bati, Meta, and Kebri-Beyah) representing the lowland crop-livestock (LLCL), highland cereal-livestock (HLCL), and pastoral/agropastoral (P/AP) systems, respectively. The study targeted the three goat types (Bati, Hararghe Highland, and Short-eared Somali) found in Ethiopia. Households in all systems considered meat production, milk production, and income generation as major purpose of keeping goats. However, those in the low rainfall and arid environments of P/AP systems gave high ranking to adaptability to harsh environments and also to building social and religious values. In LLCL and HLCL systems, goat skin and manure were more valued than in P/AP systems. Principally, in P/AP systems, the awareness of households to skin utilization and marketing was very low. Despite diverse multiple breeding objectives identified, household breeding practices were affected by constraints related to disease prevalence, feed shortage and water scarcity, and lack of awareness on skin management, utilization, and marketing. Thus, designing and implementing of sustainable goat improvement programs is an overriding priority and should take into account the breeding objectives and knowledge of goat keepers in all production systems. Along with the breed improvement, a strategy should also be devised to enhance the utilization and marketing of goat skin at all levels of production.

Mentoring Human Performance - 12480

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geis, John A.; Haugen, Christian N.

2012-07-01

Although the positive effects of implementing a human performance approach to operations can be hard to quantify, many organizations and industry areas are finding tangible benefits to such a program. Recently, a unique mentoring program was established and implemented focusing on improving the performance of managers, supervisors, and work crews, using the principles of Human Performance Improvement (HPI). The goal of this mentoring was to affect behaviors and habits that reliably implement the principles of HPI to ensure continuous improvement in implementation of an Integrated Safety Management System (ISMS) within a Conduct of Operations framework. Mentors engaged with personnel inmore » a one-on-one, or one-on-many dialogue, which focused on what behaviors were observed, what factors underlie the behaviors, and what changes in behavior could prevent errors or events, and improve performance. A senior management sponsor was essential to gain broad management support. A clear charter and management plan describing the goals, objectives, methodology, and expected outcomes was established. Mentors were carefully selected with senior management endorsement. Mentors were assigned to projects and work teams based on the following three criteria: 1) knowledge of the work scope; 2) experience in similar project areas; and 3) perceived level of trust they would have with project management, supervision, and work teams. This program was restructured significantly when the American Reinvestment and Recovery Act (ARRA) and the associated funding came to an end. The program was restructured based on an understanding of the observations, attributed successes and identified shortfalls, and the consolidation of those lessons. Mentoring the application of proven methods for improving human performance was shown effective at increasing success in day-to-day activities and increasing confidence and level of skill of supervisors. While mentoring program effectiveness is difficult to measure, and return on investment is difficult to quantify, especially in complex and large organizations where the ability to directly correlate causal factors can be challenging, the evidence presented by Sydney Dekker, James Reason, and others who study the field of human factors does assert managing and reducing error is possible. Employment of key behaviors-HPI techniques and skills-can be shown to have a significant impact on error rates. Our mentoring program demonstrated reduced error rates and corresponding improvements in safety and production. Improved behaviors are the result, of providing a culture with consistent, clear expectations from leadership, and processes and methods applied consistently to error prevention. Mentoring, as envisioned and executed in this program, was effective in helping shift organizational culture and effectively improving safety and production. (authors)« less

An Analysis of Research Quality and Productivity at Six Academic Orthopaedic Residencies.

PubMed

Osborn, Patrick M; Ames, S Elizabeth; Turner, Norman S; Caird, Michelle S; Karam, Matthew D; Mormino, Matthew A; Krueger, Chad A

2018-06-06

It remains largely unknown what factors impact the research productivity of residency programs. We hypothesized that dedicated resident research time would not affect the quantity and quality of a program's peer-reviewed publication within orthopedic residencies. These findings may help programs improve structure their residency programs to maximize core competencies. Three hundred fifty-nine residents and 240 staff from six different US orthopedic residency programs were analyzed. All publications published by residents and faculty at each program from January 2007 to December 2015 were recorded. SCImago Journal Rankings (SJR) were found for each journal. There were no significant differences in publications by residents at each program (p > 0.05). Faculty with 10+ years of on staff, had significantly more publications than those with less than 10years (p < 0.01). Programs with increased resident research time did not consistently produce publications with higher SJR than those without dedicated research time. Increased dedicated resident research time did not increase resident publication rates or lead to publications with higher SJR. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

FY2017 Energy Efficient Mobility Systems Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

During fiscal year 2017 (FY 2017), the U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) created the Energy Efficient Mobility Systems (EEMS) Program to understand the range of mobility futures that could result from these disruptive technologies and services, and to create solutions that improve mobility energy productivity, or the value derived from the transportation system per unit of energy consumed. Increases in mobility energy productivity result from improvements in the quality or output of the transportation system, and/or reductions in the energy used for transportation.

Navy/Marine Corps Manager’s Desktop Guide for CALS Implementation. 2nd Edition

DTIC Science & Technology

1993-06-30

significant process and productivity that CALS initiatives are providing within the Navy infrastructure. CALS programs are on-line and working in today’s Navy...era of declining budgets, CALS is most important in enhancing logistic support productivity to maintain operations and improve readiness. Our...is to be accomplished through the general adoption of a set of procedures and staridards for the production , access, management, maintenance, and

Kaizen newspaper

NASA Technical Reports Server (NTRS)

Shearer, Scott C. (Inventor); Proferes, John Nicholas (Inventor); Baker, Sr., Mitchell D. (Inventor); Reilly, Kenneth B. (Inventor); Tiwari, Vijai K. (Inventor)

2013-01-01

Systems, computer program products, and methods are disclosed for tracking an improvement event. An embodiment includes an event interface configured to receive a plurality of entries related to each of a plurality of improvement events. The plurality of entries includes a project identifier for the improvement event, a creation date, an objective, an action related to reaching the objective, and a first deadline related to the improvement event. A database interface is configured to store the plurality of entries in an event database.

Professional Development Capacity Building in Pennsylvania's Regional Staff Development Program: The "WorkNet" Project. Final Report [and] WorkNet Workplace Literacy Trainer's Guide.

ERIC Educational Resources Information Center

Carman, Priscilla S.

These two documents are products of a project to improve the capability of the Pennsylvania Regional Staff Development Centers to provide current, research-based workplace literacy training and technical assistance to adult basic and literacy education programs. The final report describes these project activities: development of training materials…

Vocational Training for Women Refugees in Africa: Guide-lines from Selected Field Projects. Training Discussion Paper No. 26.

ERIC Educational Resources Information Center

Hall, Eve

In addition to describing how training programs for African refugees fail to meet the needs of women (who along with children are the majority of refugees), this document offers guidelines for improving the programs and, thus, the productivity and incomes of women refugees. The first section, called "Women Refugees: The Overlooked…

Manpower Services in the Workplace. An Employer Technical Services Program for a State Employment Service.

ERIC Educational Resources Information Center

Kirsch, Arthur W.; And Others

This report outlines a program through which a State Employment Service, using existing resources, can provide employers and their workers with a broad range of technical services in order to improve productivity and make work more tolerable. The report is based on observations and analysis by a team of participant-observers of a Skill Improvement…

Report of a Therapeutic Drama Program in a Federal Prison: Implications for Applied Communication.

ERIC Educational Resources Information Center

Mettee, Dorothy L.

Noting that new approaches must be found to decrease the numbers of inmates returning to United States prisons and to provide means for productive changes that will result in self-improvement and new options for inmates both inside and outside the prison after their release, a drama program was established in 1979 for inmates at the Federal…

Project LEAP: The Labor Education Achievement Program. A Program To Improve the Literacy Level and Productivity of the Workforce. Final Project Report. April 1, 1990-June 30, 1991.

ERIC Educational Resources Information Center

Metropolitan Baltimore Council of AFL-CIO Unions, MD.

The Labor Education Achievement Program (LEAP) exceeded its recruitment and enrollment goal for April 1990 to June 1991. The number of union workers receiving services was 697 in 59 classes at 20 sites. Recruitment success was made possible by the use of the communication networks of the Baltimore AFL-CIO Metropolitan Council of Unions and public…

Establishing Esri ArcGIS Enterprise Platform Capabilities to Support Response Activities of the NASA Earth Science Disasters Program

NASA Astrophysics Data System (ADS)

Molthan, A.; Seepersad, J.; Shute, J.; Carriere, L.; Duffy, D.; Tisdale, B.; Kirschbaum, D.; Green, D. S.; Schwizer, L.

2017-12-01

NASA's Earth Science Disasters Program promotes the use of Earth observations to improve the prediction of, preparation for, response to, and recovery from natural and technological disasters. NASA Earth observations and those of domestic and international partners are combined with in situ observations and models by NASA scientists and partners to develop products supporting disaster mitigation, response, and recovery activities among several end-user partners. These products are accompanied by training to ensure proper integration and use of these materials in their organizations. Many products are integrated along with other observations available from other sources in GIS-capable formats to improve situational awareness and response efforts before, during and after a disaster. Large volumes of NASA observations support the generation of disaster response products by NASA field center scientists, partners in academia, and other institutions. For example, a prediction of high streamflows and inundation from a NASA-supported model may provide spatial detail of flood extent that can be combined with GIS information on population density, infrastructure, and land value to facilitate a prediction of who will be affected, and the economic impact. To facilitate the sharing of these outputs in a common framework that can be easily ingested by downstream partners, the NASA Earth Science Disasters Program partnered with Esri and the NASA Center for Climate Simulation (NCCS) to establish a suite of Esri/ArcGIS services to support the dissemination of routine and event-specific products to end users. This capability has been demonstrated to key partners including the Federal Emergency Management Agency using a case-study example of Hurricane Matthew, and will also help to support future domestic and international disaster events. The Earth Science Disasters Program has also established a longer-term vision to leverage scientists' expertise in the development and delivery of end-user training, increase public awareness of NASA's Disasters Program, and facilitate new partnerships with disaster response organizations. Future research and development will foster generation of products that leverage NASA's Earth observations for disaster prediction, preparation and mitigation, response, and recovery.

Proposal Improvements That Work

NASA Technical Reports Server (NTRS)

Dunn, F.

1998-01-01

Rocketdyne Propulsion and Power, an operating location of Boeing in Canoga Park, California is under contract with NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama for design, development, production, and mission support of Space Shuttle Main Engines (SSMEs). The contract was restructured in 1996 to emphasize a mission contracting environment under which Rocketdyne supports the Space Transportation System launch manifest of seven flights a year without the need for a detailed list of contract deliverables such as nozzles, turbopumps, and combustion devices. This contract structure is in line with the overall Space Shuttle program goals established by the NASA to fly safely, meet the flight manifest, and reduce cost. Rocketdyne's Contracts, Pricing, and Estimating team has worked for the past several years with representatives from MSFC, the local Defense Contract Management Command, and the DCAA to improve the quality of cost proposals to MSFC for contract changes on the SSME. The contract changes on the program result primarily from engineering change proposals for product enhancements to improve safety, maintainability, or operability in the space environment. This continuous improvement team effort has been successful in improving proposal quality, reducing cycle time, and reducing cost. Some of the principal lessons learned are highlighted here to show how proposal improvements can be implemented to enhance customer satisfaction and ensure cost proposals can be evaluated easily by external customers.

Assessing the Utility of and Improving USGS Earthquake Hazards Program Products

NASA Astrophysics Data System (ADS)

Gomberg, J. S.; Scott, M.; Weaver, C. S.; Sherrod, B. L.; Bailey, D.; Gibbons, D.

2010-12-01

A major focus of the USGS Earthquake Hazards Program (EHP) has been the development and implementation of products and information meant to improve earthquake hazard assessment, mitigation and response for a myriad of users. Many of these products rely on the data and efforts of the EHP and its partner scientists who are building the Advanced National Seismic System (ANSS). We report on a project meant to assess the utility of many of these products and information, conducted collaboratively by EHP scientists and Pierce County Department of Emergency Management staff. We have conducted focus group listening sessions with members of the engineering, business, medical, media, risk management, and emergency response communities as well as participated in the planning and implementation of earthquake exercises in the Pacific Northwest. Thus far we have learned that EHP and ANSS products satisfy many of the needs of engineers and some planners, and information is widely used by media and the general public. However, some important communities do not use these products despite their intended application for their purposes, particularly county and local emergency management and business communities. We have learned that products need to convey more clearly the impact of earthquakes, in everyday terms. Users also want products (e.g. maps, forecasts, etc.) that can be incorporated into tools and systems they use regularly. Rather than simply building products and posting them on websites, products need to be actively marketed and training provided. We suggest that engaging users prior to and during product development will enhance their usage and effectiveness.

Egypt's FOF shifts into high gear.

PubMed

1983-01-01

Family of the Future (FOF), a private Egyptian family planning organization, is implementing a number of new activities in its 4 year old contraceptive social marketing program. These changes, in part, are a response to the recommendations made in a 1982 audit of the program. New activities include television advertising of contraceptives, implementation of a physician training program, and expansion of the program's product line. In 1980, FOF initiated a televised promotional campaign for several of its products. Television advertising is generally not approved of in Arab countries. The FOF television ads generated some religious controversy but spurred lagging sales of the program's condoms and vaginal foam tablets (Annan). Prior to the campaign, sales of Annan averaged 35,000 tablets/month. During the 1st month following the television campaign, sales reached 660,000 and during the 2nd month, more than 1 million tablets were sold. An IUD insertion training program for physicians was implemented in October, 1983. Contraceptive training in Egyptian medical shools is inadequate. As a result physicians are hesitant about recommending IUDs to their patients. IUDs are popular among poor urban women, and IUDs acoount for more than 1/2 of the couple years of protection provided by the FOF program. Another training program is currently being developed for the purpose of improving the marketing skills of FOF managers. The program's product line is expected to increase. A low dose oral contraceptive will be introducted in late 1983 or early 1984, and plans are being developed for the introduction of an ultra-thin condom. The program is also considering selling several noncontraceptive items. Products udner consideration are surgical gloves as a supplemental item for the program's IUD kits, pregnancy test kits, and vitamin supplements for pregnant women.

50 CFR 679.27 - Improved Retention/Improved Utilization Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... prohibited all fish of that species brought on board the vessel up to the MRA for that species. (C) Retention... on board equals the MRA for that species. (C) Retention of an IR/IU species is prohibited no fish or... the point that the round-weight equivalent of primary products on board equals the MRA for that...

50 CFR 679.27 - Improved Retention/Improved Utilization Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... prohibited all fish of that species brought on board the vessel up to the MRA for that species. (C) Retention... on board equals the MRA for that species. (C) Retention of an IR/IU species is prohibited no fish or... the point that the round-weight equivalent of primary products on board equals the MRA for that...

Horizontal Evaluation: Fostering Knowledge Sharing and Program Improvement within a Network

ERIC Educational Resources Information Center

Thiele, Graham; Devaux, Andre; Velasco, Claudio; Horton, Douglas

2007-01-01

Horizontal evaluation combines self-assessment and external evaluation by peers. Papa Andina, a regional network that works to reduce rural poverty in the Andean region by fostering innovation in potato production and marketing, has used horizontal evaluations to improve the work of local project teams and to share knowledge within the network. In…

Hardwood genetics and tree improvement - A Midwest USA perspective

Treesearch

C. H. Michler; R. Meilan; K. E. Woeste; P. M. Pijut; D. Jacobs; P. Aldrich; J. Glaubitz

2005-01-01

Fine hardwood trees in the Central Hardwoods region of the United States are an important resource for the furniture, cabinetry, flooring, modular home, and paneling manufacturing industries. Consumers find wood from these trees to be very desirable because of quality factors such as grain, strength and color. To enhance wood production, tree improvement programs can...

The Use of Technology to Improve Staff Performance

ERIC Educational Resources Information Center

Nepo, Kaori G.

2010-01-01

The on-going staff training is one of critical components for the effective programming for adolescents and adults with autism, although it is often overlooked. The available technology can be useful to improve not only productivity and organization of our daily life, but also the work performance. The purpose of this study was to examine the…

76 FR 37678 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... the purpose of Part A-1 of EPCA, which is to improve the efficiency of electric motors and pumps and... to improve the efficiency of electric motors, pumps and certain other industrial equipment to.... Energy Information Administration. \\2\\ Based on Energy Efficiency and Electric Motors, Report PB- 259 129...

Effective career ladders.

PubMed

Bryant, B; Rabbitts, D; Shover, J; Torres, M; VanDerHeyden, B; Violand-Jones, S

1992-01-01

Motivation, quality improvement, productivity enhancement. These are just some of the benefits of an effective career ladder program. The key term here is effective. It is easy for laboratory personnel to stagnate professionally if they do not have a career ladder program, but it is even easier for them to become frustrated--even cynical--over a program that fails to live up to its expectations to encourage, support, and reward professional advancement. If you have been looking form some ideas to get your own career ladder program off the ground, the following responses from your colleagues may help as CLMR asks: What makes your career ladder program effective?

Process, not product: investigating recommendations for improving citizen science "success".

PubMed

Freitag, Amy; Pfeffer, Max J

2013-01-01

Citizen science programs are increasingly popular for a variety of reasons, from public education to new opportunities for data collection. The literature published in scientific journals resulting from these projects represents a particular perspective on the process. These articles often conclude with recommendations for increasing "success". This study compared these recommendations to those elicited during interviews with program coordinators for programs within the United States. From this comparison, success cannot be unilaterally defined and therefore recommendations vary by perspective on success. Program coordinators tended to have more locally-tailored recommendations specific to particular aspects of their program mission.

New Activities of the U.S. National Tsunami Hazard Mitigation Program, Mapping and Modeling Subcommittee

NASA Astrophysics Data System (ADS)

Wilson, R. I.; Eble, M. C.

2013-12-01

The U.S. National Tsunami Hazard Mitigation Program (NTHMP) is comprised of representatives from coastal states and federal agencies who, under the guidance of NOAA, work together to develop protocols and products to help communities prepare for and mitigate tsunami hazards. Within the NTHMP are several subcommittees responsible for complimentary aspects of tsunami assessment, mitigation, education, warning, and response. The Mapping and Modeling Subcommittee (MMS) is comprised of state and federal scientists who specialize in tsunami source characterization, numerical tsunami modeling, inundation map production, and warning forecasting. Until September 2012, much of the work of the MMS was authorized through the Tsunami Warning and Education Act, an Act that has since expired but the spirit of which is being adhered to in parallel with reauthorization efforts. Over the past several years, the MMS has developed guidance and best practices for states and territories to produce accurate and consistent tsunami inundation maps for community level evacuation planning, and has conducted benchmarking of numerical inundation models. Recent tsunami events have highlighted the need for other types of tsunami hazard analyses and products for improving evacuation planning, vertical evacuation, maritime planning, land-use planning, building construction, and warning forecasts. As the program responsible for producing accurate and consistent tsunami products nationally, the NTHMP-MMS is initiating a multi-year plan to accomplish the following: 1) Create and build on existing demonstration projects that explore new tsunami hazard analysis techniques and products, such as maps identifying areas of strong currents and potential damage within harbors as well as probabilistic tsunami hazard analysis for land-use planning. 2) Develop benchmarks for validating new numerical modeling techniques related to current velocities and landslide sources. 3) Generate guidance and protocols for the production and use of new tsunami hazard analysis products. 4) Identify multistate collaborations and funding partners interested in these new products. Application of these new products will improve the overall safety and resilience of coastal communities exposed to tsunami hazards.

NASA wiring for space applications program test results

NASA Astrophysics Data System (ADS)

Stavnes, Mark; Hammoud, Ahmad

1995-11-01

The electrical power wiring tests results from the NASA Wiring for Space Applications program are presented. The goal of the program was to develop a base for the building of a lightweight, arc track-resistant electrical wiring system for aerospace applications. This new wiring system would be applied to such structures as pressurized modules, trans-atmospheric vehicles, LEO/GEO environments, and lunar and Martian environments. Technological developments from this program include the fabrication of new insulating materials, the production of new wiring constructions, an improved system design, and an advanced circuit protection design.

Optimization of Ocean Color Algorithms: Application to Satellite Data Merging

NASA Technical Reports Server (NTRS)

Maritorena, Stephane; Siegel, David A.; Morel, Andre

2003-01-01

The objective of our program is to develop and validate a procedure for ocean color data merging which is one of the major goals of the SIMBIOS project. The need for a merging capability is dictated by the fact that since the launch of MODIS on the Terra platform and over the next decade, several global ocean color missions from various space agencies are or will be operational simultaneously. The apparent redundancy in simultaneous ocean color missions can actually be exploited to various benefits. The most obvious benefit is improved coverage. The patchy and uneven daily coverage from any single sensor can be improved by using a combination of sensors. Beside improved coverage of the global Ocean the merging of Ocean color data should also result in new, improved, more diverse and better data products with lower uncertainties. Ultimately, ocean color data merging should result in the development of a unified, scientific quality, ocean color time series, from SeaWiFS to NPOESS and beyond. Various approaches can be used for ocean color data merging and several have been tested within the frame of the SIMBIOS program. As part of the SIMBIOS Program, we have developed a merging method for ocean color data. Conversely to other methods our approach does not combine end-products like the subsurface chlorophyll concentration (chl) from different sensors to generate a unified product. Instead, our procedure uses the normalized water-leaving radiances (L(sub WN)(lambda)) from single or multiple sensors and uses them in the inversion of a semi-analytical ocean color model that allows the retrieval of several ocean color variables simultaneously. Beside ensuring simultaneity and consistency of the retrievals (all products are derived from a single algorithm), this model-based approach has various benefits over techniques that blend end-products (e.g. chlorophyll): 1) it works with single or multiple data sources regardless of their specific bands, 2) it exploits band redundancies and band differences, 3) it accounts for uncertainties in the (L(sub WN)(lambda)) data and, 4) it provides uncertainty estimates for the retrieved variables.

Federal incentives for industrial modernization: Historical review and future opportunities

NASA Technical Reports Server (NTRS)

Coleman, Sandra C.; Batson, Robert G.

1987-01-01

Concerns over the aging of the U.S. aerospace industrial base led DOD to introduce first its Technology Modernization (Tech Mod) Program, and more recently the Industrial Modernization Incentive Program (IMIP). These incentives include productivity shared savings rewards, contractor investment protection to allow for amortization of plant and equipment, and subcontractor/vendor participation. The purpose here is to review DOD IMIP and to evaluate whether a similar program is feasible for NASA and other non-DOD agencies. The IMIP methodology is of interest to industrial engineers because it provides a structured, disciplined approach to identifying productivity improvement opportunities and documenting their expected benefit. However, it is shown that more research on predicting and validating cost avoidance is needed.

LTTP: 1999 Year in Review

DOT National Transportation Integrated Search

2002-12-13

Improving the productivity and mobility of the national highway transportation system is a key goal of the Federal Highway Administration (FHWA). During 1999, FHWA's Long Term Pavement Performance (LTPP) program continued to work toward these goals t...

Product Definition Data (PDD) Current Environment Report

DOT National Transportation Integrated Search

1989-05-01

The objective of the Air Force Computer-aided Acquisition and Logistics Support (CALS) Program is to improve weapon system reliability, supportability and maintainability, and to reduce the cost of weapon system acquisition and logistics support. As ...

77 FR 27797 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... 4279-2) for the following: Applicant/Location: Samoa Tuna Processors, Inc. Principal Product/Purpose... improvements, replace machinery and equipment and utilities repairs and other upgrades. The plant will be...

77 FR 27798 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... 4279-2) for the following: Applicant/Location: Tri Marine Samoa, Inc. Principal Product/Purpose: The..., which includes building renovations and improvements, repairs and upgrades, construction of a processing...

Voluntary Medical Male Circumcision Scale-Up in Nyanza, Kenya: Evaluating Technical Efficiency and Productivity of Service Delivery

PubMed Central

Omondi Aduda, Dickens S.; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

2015-01-01

Background Voluntary medical male circumcision (VMMC) service delivery is complex and resource-intensive. In Kenya’s context there is still paucity of information on resource use vis-à-vis outputs as programs scale up. Knowledge of technical efficiency, productivity and potential sources of constraints is desirable to improve decision-making. Objective To evaluate technical efficiency and productivity of VMMC service delivery in Nyanza in 2011/2012 using data envelopment analysis. Design Comparative process evaluation of facilities providing VMMC in Nyanza in 2011/2012 using output orientated data envelopment analysis. Results Twenty one facilities were evaluated. Only 1 of 7 variables considered (total elapsed operation time) significantly improved from 32.8 minutes (SD 8.8) in 2011 to 30 minutes (SD 6.6) in 2012 (95%CI = 0.0350–5.2488; p = 0.047). Mean scale technical efficiency significantly improved from 91% (SD 19.8) in 2011 to 99% (SD 4.0) in 2012 particularly among outreach compared to fixed service delivery facilities (CI -31.47959–4.698508; p = 0.005). Increase in mean VRS technical efficiency from 84% (SD 25.3) in 2011 and 89% (SD 25.1) in 2012 was not statistically significant. Benchmark facilities were #119 and #125 in 2011 and #103 in 2012. Malmquist Productivity Index (MPI) at fixed facilities declined by 2.5% but gained by 4.9% at outreach ones by 2012. Total factor productivity improved by 83% (p = 0.032) in 2012, largely due to progress in technological efficiency by 79% (p = 0.008). Conclusions Significant improvement in scale technical efficiency among outreach facilities in 2012 was attributable to accelerated activities. However, ongoing pure technical inefficiency requires concerted attention. Technological progress was the key driver of service productivity growth in Nyanza. Incorporating service-quality dimensions and using stepwise-multiple criteria in performance evaluation enhances comprehensiveness and validity. These findings highlight site-level resource use and sources of variations in VMMC service productivity, which are important for program planning. PMID:25706119

The Teachers of Quality Academy: Evaluation of the Effectiveness and Impact of a Health Systems Science Training Program.

PubMed

Walsh, Danielle S; Lazorick, Suzanne; Lawson, Luan; Lake, Donna; Garrison, Herbert G; Higginson, Jason; Vos, Paul; Baxley, Elizabeth

2018-05-01

This project aimed to evaluate the effectiveness of a faculty development program in health systems science (HSS)-the Teachers of Quality Academy (TQA). Participants in TQA and a comparison group were evaluated before, during, and 1 year after the program using self-perception questionnaires, tests of HSS knowledge, and tracking of academic productivity and career advancement. Among program completers (n = 27), the mean self-assessed ratings of knowledge and skills of HSS topics immediately after the program, as compared to baseline, increased significantly compared to controls (n = 30). Participants demonstrated progressive improvement of self-perceived skills and attitudes, and retention of HSS knowledge, from baseline to completion of the program. Participants also demonstrated substantially higher HSS scholarly productivity, leadership, and career advancement compared to the comparison group. The TQA effectively created a faculty cadre able to role model, teach, and create a curriculum in HSS competencies for medical students, resident physicians, and other health professionals.

Cooperation between schools and businesses/industries in meeting the demand for working experience

NASA Astrophysics Data System (ADS)

Widiyanti, Yoto, Solichin

2017-09-01

Vocational Secondary School (VSS) as one of the educational institutions has a mission or purpose to prepare a workforce who can fill job requirements and qualified professionals who are expected to play a role as a featured tool for business and industry in Indonesia in facing global competition. The principle of industrial cooperation between schools and business world has the objective to accelerate the adjustment period needed by vocational high school graduates to enter the workforce, which eventually will improve the quality of the vocational high schools. A scope of activities that would enable both sides to implement the activities is necessary to be applied during the cooperation. The types of programs that will be conducted consist of the Internship Program, Training Program, Production Program (innovative product), and Graduate Distribution Program. Such programs also implement the strategies of cooperation, such as recruitment, career fair, human resource delivery to the company, hiring process and arrival at the enterprise.

Development of a black willow improvement program for biomass production in the Lower Mississippi River Alluvial Valley

Treesearch

Randell J. Rousseau; Emile S. Gardiner; Theodor D. Leininger

2012-01-01

Black willow (Salix nigra Marsh.) has the potential to be a significant feedstock source for bioenergy and biofuels production in the Lower Mississippi Alluvial Valley (LMAV). This potential is based on a number of primary factors including rapid growth, ease of vegetative propagation, excellent rooting, and the ability to regenerate from coppice...

The Effects of Employer-Sponsored Child Care on Employee Absenteeism, Turnover, Productivity, Recruitment or Job Satisfaction: What Is Claimed and What Is Known.

ERIC Educational Resources Information Center

Miller, Thomas I.

1984-01-01

Evaluates the evidence supporting claims that employer-sponsored child care programs improve employee work behaviors and attitudes. Results indicated that assertions that employer-sponsored child care reduces workers' absenteeism or tardiness, or that it increases workers' productivity or job satisfaction are not supported by credible research.…

Prehospital blood product transfusion by U.S. army MEDEVAC during combat operations in Afghanistan: a process improvement initiative.

PubMed

Malsby, Robert F; Quesada, Jose; Powell-Dunford, Nicole; Kinoshita, Ren; Kurtz, John; Gehlen, William; Adams, Colleen; Martin, Dustin; Shackelford, Stacy

2013-07-01

U.S. Army flight medics performed a process improvement initiative of 15 blood product transfusions on select Category A (Urgent) helicopter evacuation casualties meeting approved clinical indications for transfusion. These transfusions were initiated from point of injury locations aboard MEDEVAC aircraft originating from one of two locations in southern Afghanistan. All flight medics executing the transfusions were qualified through a standardized and approved program of instruction, which included day and night skills validation, and a 90% or higher written examination score. There was no adverse reaction or out-of-standard blood product temperature despite hazardous conditions and elevated cabin temperatures. All casualties within a 10-minute flight time who met clinical indications were transfused. Utilization of a standard operating procedure with strict handling and administration parameters, a rigorous training and qualification program, an elaborate cold chain system, and redundant documentation of blood product units ensured that flight medic initiated transfusions were safe and effective. Research study is needed to refine the indications for prehospital blood transfusion and to determine the effect on outcomes in severely injured trauma patients. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

Vulnerability of Rehabilitated Agricultural Production Systems to Invasion by Nontarget Plant Species

NASA Astrophysics Data System (ADS)

Baer, Sara G.; Engle, David M.; Knops, Johannes M. H.; Langeland, Kenneth A.; Maxwell, Bruce D.; Menalled, Fabian D.; Symstad, Amy J.

2009-02-01

Vast areas of arable land have been retired from crop production and “rehabilitated” to improved system states through landowner incentive programs in the United States (e.g., Conservation and Wetland Reserve Programs), as well as Europe (i.e., Agri-Environment Schemes). Our review of studies conducted on invasion of rehabilitated agricultural production systems by nontarget species elucidates several factors that may increase the vulnerability of these systems to invasion. These systems often exist in highly fragmented and agriculturally dominated landscapes, where propagule sources of target species for colonization may be limited, and are established under conditions where legacies of past disturbance persist and prevent target species from persisting. Furthermore, rehabilitation approaches often do not include or successfully attain all target species or historical ecological processes (e.g., hydrology, grazing, and/or fire cycles) key to resisting invasion. Uncertainty surrounds ways in which nontarget species may compromise long term goals of improving biodiversity and ecosystem services through rehabilitation efforts on former agricultural production lands. This review demonstrates that more studies are needed on the extent and ecological impacts of nontarget species as related to the goals of rehabilitation efforts to secure current and future environmental benefits arising from this widespread conservation practice.

Natural methods for increasing reproductive efficiency in small ruminants.

PubMed

Martin, G B; Milton, J T B; Davidson, R H; Banchero Hunzicker, G E; Lindsay, D R; Blache, D

2004-07-01

This paper describes three strategies to improve the reproductive performance of small ruminants in ways that lead to "clean, green and ethical" animal production. The first is aimed at control of the timing of reproductive events for which we turn to the socio-sexual inputs of the "male effect" to induce synchronised ovulation in females that would otherwise be anovulatory. The second strategy, "focussed feeding", is based on our knowledge of the responses to nutrition and aims to develop short programs of nutritional supplements that are precisely timed and specifically designed for individual events in the reproductive process, such as gamete production, embryo survival, fetal programming and colostrum production. The third strategy aims to maximise offspring survival by a combination of management, nutrition and genetic selection for behavior (temperament). All of these approaches involve non-pharmacological manipulation of the endogenous control systems of the animals and complement the detailed information from ultrasound that is now becoming available. The use of such clean, green and ethical tools in the management of our animals can be cost-effective, increase productivity and, at the same time, greatly improve the image of meat and milk industries in society and the marketplace.

Development and Validation of Remote Sensing-Based Surface Inundation Products for Vector-Borne Disease Risk in East Africa

NASA Astrophysics Data System (ADS)

Jensen, K.; McDonald, K. C.; Ceccato, P.; Schroeder, R.; Podest, E.

2014-12-01

The potential impact of climate variability and change on the spread of infectious disease is of increasingly critical concern to public health. Newly-available remote sensing datasets may be combined with predictive modeling to develop new capabilities to mitigate risks of vector-borne diseases such as malaria, leishmaniasis, and rift valley fever. We have developed improved remote sensing-based products for monitoring water bodies and inundation dynamics that have potential utility for improving risk forecasts of vector-borne disease epidemics. These products include daily and seasonal surface inundation based on the global mappings of inundated area fraction derived at the 25-km scale from active and passive microwave instruments ERS, QuikSCAT, ASCAT, and SSM/I data - the Satellite Water Microwave Product Series (SWAMPS). Focusing on the East African region, we present validation of this product using multi-temporal classification of inundated areas in this region derived from high resolution PALSAR (100m) and Landsat (30m) observations. We assess historical occurrence of malaria in the east African country of Eritrea with respect to the time series SWAMPS datasets, and we aim to construct a framework for use of these new datasets to improve prediction of future malaria risk in this region. This work is supported through funding from the NASA Applied Sciences Program, the NASA Terrestrial Ecology Program, and the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) Program. This study is also supported and monitored by National Oceanic and Atmospheric Administration (NOAA) under Grant - CREST Grant # NA11SEC4810004. The statements contained within the manuscript/research article are not the opinions of the funding agency or the U.S. government, but reflect the authors' opinions. This work was conducted in part under the framework of the ALOS Kyoto and Carbon Initiative. ALOS PALSAR data were provided by JAXA EORC.

Evolution of root endosymbiosis with bacteria: How novel are nodules?

PubMed

Markmann, Katharina; Parniske, Martin

2009-02-01

Plants form diverse symbioses with nitrogen-fixing bacteria to gain access to ammonium, a product of the prokaryote-exclusive enzyme nitrogenase. Improving the symbiotic effectiveness of crop plants like maize, wheat or rice is a highly topical challenge and could help reduce the need for energy-intense nitrogen fertilizer in staple food production. Root nodule symbiosis (RNS) constitutes one of the most productive nitrogen-fixing systems, but it is restricted to a small group of related angiosperms. Here, we review the genetic regulation of RNS and its interconnections with other plant symbiosis or plant developmental programs. Since RNS uses genetic programs that are widely conserved in land plants, we evaluate the prospects for a transfer to plants that are currently non-nodulating.

A video approach to interactive patient education.

PubMed

Maller, C E; Twitty, V J; Sauve, A

1997-04-01

A quality improvement model presents the stages of designing and producing a preoperative videotape for improved patient satisfaction outcomes. PACU nurses formed an interdisciplinary team of providers and patients to update an existing preoperative sound/slide program into video. Improved patient outcomes were reflected in greater availability, accessibility, and consistency of preoperative instruction. A videotape program for home viewing was instituted to reach out to the surgical patient population served by the Albuquerque Veterans Affairs Medical Center in New Mexico. A quality improvement storyboard approach to videotape production met Joint Commission on Accreditation of Health Care Organization (JCAHO) standards for interactive patient education at a recent JCAHO survey. Preliminary evaluative data from patients supports a growing appeal of videos to patients and family members as an additional preoperative teaching strategy for adult surgical patients.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., with the assistance of NREL's PV Manufacturing R&D program, have continued the advancement of CIGS production technology through the development of trajectory-oriented predictive/control models, fault-tolerance control, control-platform development, in-situ sensors, and process improvements. Modeling activities to date include the development of physics-based and empirical models for CIGS and sputter-deposition processing, implementation of model-based control, and application of predictive models to the construction of new evaporation sources and for control. Model-based control is enabled through implementation of reduced or empirical models into a control platform. Reliability improvement activities include implementation of preventivemore » maintenance schedules; detection of failed sensors/equipment and reconfiguration to continue processing; and systematic development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which, in turn, have been enabled by control and reliability improvements due to this PV Manufacturing R&D program. This has resulted in substantial improvements of flexible CIGS PV module performance and efficiency.« less

Process improvement as an investment: Measuring its worth

NASA Technical Reports Server (NTRS)

Mcgarry, Frank; Jeletic, Kellyann

1993-01-01

This paper discusses return on investment (ROI) generated from software process improvement programs. It details the steps needed to compute ROI and compares these steps from the perspective of two process improvement approaches: the widely known Software Engineering Institute's capability maturity model and the approach employed by NASA's Software Engineering Laboratory (SEL). The paper then describes the specific investments made in the SEL over the past 18 years and discusses the improvements gained from this investment by the production organization in the SEL.

Review: Sustainability of crossbreeding in developing countries; definitely not like crossing a meadow….

PubMed

Leroy, G; Baumung, R; Boettcher, P; Scherf, B; Hoffmann, I

2016-02-01

Crossbreeding, considering either terminal or rotational crossing, synthetic breed creation or breed replacement, is often promoted as an efficient strategy to increase farmers' income through the improvement of productivity of local livestock in developing countries. Sustainability of crossbreeding is however frequently challenged by constraints such as poor adaptation to the local environment or lack of logistic support. In this review, we investigate factors that may influence the long-term success or the failure of crossbreeding programs, based on the scientific literature and country reports submitted for The Second Report on the State of the World's Animal Genetic Resources for Food and Agriculture. Crossbreeding activities vary widely across species and countries. Its sustainability is dependent on different prerequisites such as continual access to adequate breeding stock (especially after the end of externally funded crossbreeding projects), the opportunity of improved livestock to express their genetic potential (e.g. through providing proper inputs) and integration within a reliable market chain. As formal crossbreeding programs are often associated with adoption of other technologies, they can be a catalyst for innovation and development for smallholders. Given the increasing global demand for animal products, as well as the potential environmental consequences of climate change, there is a need for practical research to improve the implementation of long-term crossbreeding programs in developing countries.

Acquisition-Management Program

NASA Technical Reports Server (NTRS)

Avery, Don E.; Vann, A. Vernon; Jones, Richard H.; Rew, William E.

1987-01-01

NASA Acquisition Management Subsystem (AMS) program integrated NASA-wide standard automated-procurement-system program developed in 1985. Designed to provide each NASA installation with procurement data-base concept with on-line terminals for managing, tracking, reporting, and controlling contractual actions and associated procurement data. Subsystem provides control, status, and reporting for various procurement areas. Purpose of standardization is to decrease costs of procurement and operation of automatic data processing; increases procurement productivity; furnishes accurate, on-line management information and improves customer support. Written in the ADABAS NATURAL.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1972-01-01

A program to advance the technology for a cost-effective hydrogen/oxygen fuel cell system for future manned spacecraft is discussed. The evaluation of base line design concepts and the development of product improvements in the areas of life, power, specific weight and volume, versatility of operation, field maintenance and thermal control were conducted from the material and component level through the fabrication and test of an engineering model of the fuel cell system. The program was to be accomplished in a 13 month period.

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

NASA Technical Reports Server (NTRS)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

Reliability Growth of Tactical Coolers at CMC Electronics Cincinnati: 1/5-Watt Cooler Test Report

NASA Astrophysics Data System (ADS)

Kuo, D. T.; Lody, T. D.

2004-06-01

CMC Electronics Cincinnati (CMC) is conducting a reliability growth program to extend the life of tactical Stirling-cycle cryocoolers. The continuous product improvement processes consist of testing production coolers to failure, determining the root cause, incorporating improvements and verification. The most recent life data for the 1/5-Watt Cooler (Model B512B) is presented with a discussion of leading root causes and potential improvements. The mean time to failure (MTTF) life of the coolers was found to be 22,552 hours with the root cause of failure attributed to the accumulation of methane and carbon dioxide in the cooler and the wear of the piston.

Integrated approach for managing health risks at work--the role of occupational health nurses.

PubMed

Marinescu, Luiza G

2007-02-01

Currently, many organizations are using a department-centered approach to manage health risks at work. In such a model, segregated departments are providing employee benefits such as health insurance, workers' compensation, and short- and long-term disability or benefits addressing work-life issues. In recent years, a new model has emerged: health and productivity management (HPM). This is an employee-centered, integrated approach, designed to increase efficiency, reduce competition for scarce resources, and increase employee participation in prevention activities. Evidence suggests that corporations using integrated HPM programs achieve better health outcomes for their employees, with consequent increased productivity and decreased absenteeism. Occupational health nurses are well positioned to assume leadership roles in their organizations by coordinating efforts and programs across departments that offer health, wellness, and safety benefits. To assume their role as change agents to improve employees' health, nurses should start using the language of business more often by improving their communication skills, computer skills, and ability to quantify and articulate results of programs and services to senior management.

Down Syndrome

MedlinePlus

... Down syndrome increases as a woman gets older. Down syndrome cannot be cured. Early treatment programs can help improve skills. They may include ... occupational, and/or educational therapy. With support and treatment, many ... Down syndrome live happy, productive lives. NIH: National Institute of ...

The congestion mitigation and air quality improvement program

DOT National Transportation Integrated Search

2000-01-01

Clean air is an important part of a healthy environment. Unfortunately, many industrial and transportation activities that sustain our economy can also produce air pollutant emissions as by-products, degrading our air quality. Safeguarding our air fr...

Best Practices in Photovoltaic System Operations and Maintenance: 2nd Edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whaley, Cass

This best practices guide encourages high-quality system deployment and operation that improves lifetime project performance and energy production while reducing, or at least optimizing, costs to deliver an operation and maintenance program.

METAL FORMING (INDUSTRIAL MULTIMEDIA BRANCH, SUSTAINABLE TECHNOLOGY DIVISION, NRMRL)

EPA Science Inventory

The Industrial Multimedia Branch's research program in metal products manufacturing was developed to identify environmental problems and deliver solutions for environmental improvements based on sustainable technology to the industry. There are over 35,000 manufacturing establish...

77 FR 27797 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... 4279-2) for the following: Applicant/Location: Samoa Cold Storage, Inc. Principal Product/Purpose: The... demolition of the interior of the existing facility, renovations and improvements, repairs and upgrades and...

New techniques for positron emission tomography in the study of human neurological disorders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhl, D.E.

1993-01-01

This progress report describes accomplishments of four programs. The four programs are entitled (1) Faster,simpler processing of positron-computing precursors: New physicochemical approaches, (2) Novel solid phase reagents and methods to improve radiosynthesis and isotope production, (3) Quantitative evaluation of the extraction of information from PET images, and (4) Optimization of tracer kinetic methods for radioligand studies in PET.

Constellation Commodities Studies Summary

NASA Technical Reports Server (NTRS)

Dirschka, Eric

2011-01-01

Constellation program was NASA's long-term program for space exploration. The goal of the commodities studies was to solicit industry expertise in production, storage, and transportation required for future use and to improve efficiency and life cycle cost over legacy methods. Objectives were to consolidate KSC, CCAFS and other requirements; extract available industry expertise; identify commercial opportunities; and establish synergy with State of Florida partnerships. Study results are reviewed.

STX--Fortran-4 program for estimates of tree populations from 3P sample-tree-measurements

Treesearch

L. R. Grosenbaugh

1967-01-01

Describes how to use an improved and greatly expanded version of an earlier computer program (1964) that converts dendrometer measurements of 3P-sample trees to population values in terms of whatever units user desires. Many new options are available, including that of obtaining a product-yield and appraisal report based on regression coefficients supplied by user....

Space Shuttle Program Legacy Report

NASA Technical Reports Server (NTRS)

Johnson, Scott

2012-01-01

Share lessons learned on Space Shuttle Safety and Mission Assurance (S&MA) culture, processes, and products that can guide future enterprises to improve mission success and minimize the risk of catastrophic failures. Present the chronology of the Johnson Space Center (JSC) S&MA organization over the 40-year history of the Space Shuttle Program (SSP) and identify key factors and environments which contributed to positive and negative performance.

AFOSR Mission Critical STEAM Program

DTIC Science & Technology

2014-02-10

recently established several new academic and research facilities in the sciences, and most impressively in the area of Ecology and Biotechnology. Alcorn...the Taiwanese culture • To participate in language and cultural immersion programs • To use Mandarin to function optimally in Taiwan • To forge new...science and mathematics would significantly improve STEAM matriculation in college. In any industry, productivity is a function of the raw material

Systematic review of employer-sponsored wellness strategies and their economic and health-related outcomes.

PubMed

Kaspin, Lisa C; Gorman, Kathleen M; Miller, Ross M

2013-02-01

This review determines the characteristics and health-related and economic outcomes of employer-sponsored wellness programs and identifies possible reasons for their success. PubMed, ABI/Inform, and Business Source Premier databases, and Corporate Wellness Magazine were searched. English-language articles published from 2005 to 2011 that reported characteristics of employer-sponsored wellness programs and their impact on health-related and economic outcomes among US employees were accepted. Data were abstracted, synthesized, and interpreted. Twenty references were accepted. Wellness interventions were classified into health assessments, lifestyle management, and behavioral health. Improved economic outcomes were reported (health care costs, return on investment, absenteeism, productivity, workers' compensation, utilization) as well as decreased health risks. Programs associated with favorable outcomes had several characteristics in common. First, the corporate culture encouraged wellness to improve employees' lives, not only to reduce costs. Second, employees and leadership were strongly motivated to support the wellness programs and to improve their health in general. Third, employees were motivated by a participation-friendly corporate policy and physical environment. Fourth, successful programs adapted to the changing needs of the employees. Fifth, community health organizations provided support, education, and treatment. Sixth, successful wellness programs utilized technology to facilitate health risk assessments and wellness education. Improved health-related and economic outcomes were associated with employer-sponsored wellness programs. Companies with successful programs tended to include wellness as part of their corporate culture and supported employee participation in several key ways.

Computer science: Key to a space program renaissance. The 1981 NASA/ASEE summer study on the use of computer science and technology in NASA. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Freitas, R. A., Jr. (Editor); Carlson, P. A. (Editor)

1983-01-01

Adoption of an aggressive computer science research and technology program within NASA will: (1) enable new mission capabilities such as autonomous spacecraft, reliability and self-repair, and low-bandwidth intelligent Earth sensing; (2) lower manpower requirements, especially in the areas of Space Shuttle operations, by making fuller use of control center automation, technical support, and internal utilization of state-of-the-art computer techniques; (3) reduce project costs via improved software verification, software engineering, enhanced scientist/engineer productivity, and increased managerial effectiveness; and (4) significantly improve internal operations within NASA with electronic mail, managerial computer aids, an automated bureaucracy and uniform program operating plans.

30 years of ergonomics at 3M: a case study.

PubMed

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Regulatory Monitoring of Fortified Foods: Identifying Barriers and Good Practices

PubMed Central

Rowe, Laura A; Vossenaar, Marieke; Garrett, Greg S

2015-01-01

While fortification of staple foods and condiments has gained enormous global traction, poor performance persists throughout many aspects of implementation, most notably around the critical element of regulatory monitoring, which is essential for ensuring foods meet national fortification standards. Where coverage of fortified foods is high, limited nutritional impact of fortification programs largely exists due to regulatory monitoring that insufficiently identifies and holds producers accountable for underfortified products. Based on quality assurance data from 20 national fortification programs in 12 countries, we estimate that less than half of the samples are adequately fortified against relevant national standards. In this paper, we outline key findings from a literature review, key informant interviews with 11 fortification experts, and semi-quantitative surveys with 39 individuals from regulatory agencies and the food fortification industry in 17 countries on the perceived effectiveness of regulatory monitoring systems and barriers to compliance against national fortification standards. Findings highlight that regulatory agencies and industry disagree on the value that enforcement mechanisms have in ensuring compliance against standards. Perceived political risk of enforcement and poorly resourced inspectorate capacity appear to adversely reinforce each other within an environment of unclear legislation to create a major hurdle for improving overall compliance of fortification programs against national standards. Budget constraints affect the ability of regulatory agencies to create a well-trained inspector cadre and improve the detection and enforcement of non-compliant and underfortified products. Recommendations to improve fortification compliance include improving technical capacity; ensuring sustained leadership, accountability, and funding in both the private and the public sectors; and removing political barriers to ensure consistent detection of underfortified products and enforcement of applicable fortification standards. Only by taking concrete steps to improve the entire regulatory system that is built on a cooperative working relationship between regulatory agencies and food producers will a nutrition strategy that uses fortification see its intended health effects. PMID:26374804

Status of the Local Enforcement of Energy Efficiency Standards and Labeling Program in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina; Fino-Chen, Cecilia

2011-09-26

As part of its commitment to promoting and improving the local enforcement of appliance energy efficiency standards and labeling, the China National Institute of Standardization (CNIS) launched the National and Local Enforcement of Energy Efficiency Standards and Labeling project on August 14, 2009. The project’s short-term goal is to expand the effort to improve enforcement of standards and labeling requirements to the entire country within three years, with a long-term goal of perfecting overall enforcement. For this project, Jiangsu, Shandong, Sichuan and Shanghai were selected as pilot locations. This report provides information on the local enforcement project’s recent background, activitiesmore » and results as well as comparison to previous rounds of check-testing in 2006 and 2007. In addition, the report also offers evaluation on the achievement and weaknesses in the local enforcement scheme and recommendations. The results demonstrate both improvement and some backsliding. Enforcement schemes are in place in all target cities and applicable national standards and regulations were followed as the basis for local check testing. Check testing results show in general high labeling compliance across regions with 100% compliance for five products, including full compliance for all three products tested in Jiangsu province and two out of three products tested in Shandong province. Program results also identified key weaknesses in labeling compliance in Sichuan as well as in the efficiency standards compliance levels for small and medium three-phase asynchronous motors and self-ballasted fluorescent lamps. For example, compliance for the same product ranged from as low as 40% to 100% with mixed results for products that had been tested in previous rounds. For refrigerators, in particular, the efficiency standards compliance rate exhibited a wider range of 50% to 100%, and the average rate across all tested models also dropped from 96% in 2007 to 63%, possibly due to the implementation of newly strengthened efficiency standards in 2009. Areas for improvement include: Greater awareness at the local level to ensure that all manufacturers register their products with the label certification project and to minimize their resistance to inspections; improvement of the product sampling methodology to include representative testing of both large and small manufacturers and greater standardization of testing tools and procedures; and continued improvement in local enforcement efforts.« less

Evaluation of a Worksite Diabetes Education Program at a Large Urban Medical Center.

PubMed

Renda, Susan; Baernholdt, Marianne; Becker, Kathleen

2016-01-01

Evidence suggests that diabetes education can be delivered at the worksite to better support employees' diabetes self-management and improve productivity and health care costs. This study was conducted to address the feasibility of a diabetes worksite education program for employees at a large urban academic health care institution. The diabetes education program was delivered in the diabetes center at the institution, a resource that was previously underutilized by employees. Through collaboration with groups in the institution, 20 employees of diverse ethnicity participated in the worksite diabetes education program with positive outcomes: improved glycemic control measured (HbA1c), attainment of self-management goals, and satisfaction with the program. Work absences trended downward, but numbers of hospitalizations and emergency department visits were unchanged in the 3 months following education. Recommendations include replication of the study with more employee participation and program evaluation over a longer period of time to continue assessment of employees' educational needs. © 2015 The Author(s).

Improving the Defense Acquisition System and Reducing System Costs

DTIC Science & Technology

1981-03-30

The need for this specific commitment results from the competition among the conflicting objectives of high perform- ance, lower cost, shorter... conflict with initiatives to improve reliability and support. Whereas the fastest acquisition approach involves initiating production prxor to...their Individual thrusts result in confusion on the part of OASD who tries to implement conflicting programs, and of defense contractors performing

Interorganizational relationships within state tobacco control networks: a social network analysis.

PubMed

Krauss, Melissa; Mueller, Nancy; Luke, Douglas

2004-10-01

State tobacco control programs are implemented by networks of public and private agencies with a common goal to reduce tobacco use. The degree of a program's comprehensiveness depends on the scope of its activities and the variety of agencies involved in the network. Structural aspects of these networks could help describe the process of implementing a state's tobacco control program, but have not yet been examined. Social network analysis was used to examine the structure of five state tobacco control networks. Semi-structured interviews with key agencies collected quantitative and qualitative data on frequency of contact among network partners, money flow, relationship productivity, level of network effectiveness, and methods for improvement. Most states had hierarchical communication structures in which partner agencies had frequent contact with one or two central agencies. Lead agencies had the highest control over network communication. Networks with denser communication structures had denser productivity structures. Lead agencies had the highest financial influence within the networks, while statewide coalitions were financially influenced by others. Lead agencies had highly productive relationships with others, while agencies with narrow roles had fewer productive relationships. Statewide coalitions that received Robert Wood Johnson Foundation funding had more highly productive relationships than coalitions that did not receive the funding. Results suggest that frequent communication among network partners is related to more highly productive relationships. Results also highlight the importance of lead agencies and statewide coalitions in implementing a comprehensive state tobacco control program. Network analysis could be useful in developing process indicators for state tobacco control programs.

The Philippine Population Program strategic plan (1981-1985).

PubMed

1980-01-01

The challenge of the population problem is to effectively mobilize the country's population for productive activity. Rather than simply concern with controlling numbers, emphasis is on human resource management, the structure of employment, labor productivity and income distribution. The long-term Philippine Development Plans reflect recognition of the dynamic interaction between fertility, productivity and welfare. Objectives of the 5-Year Philippine Development Plan 1978-1982, the 10-Year Plan 1978-1987, and the Long-Term Plan to year 2000 integrate population concerns and socioeconomic goals. These objectives include the following: promotion of social development and social justice; attainment of self-sufficiency in food and greater self-reliance in energy; increased development of lagging regions, especially rural areas; improvements of habitat through the development of human settlements and proper management of the environment; and maintenance of population growth at levels conducive to national welfare. Some population concerns that are directly relevant to welfare (in addition to those related to productivity) are distribution patterns of social goods and services, access to services by sectors of the population, and buying power of families. As a total population policy should establish closer linkages, operationally, between the demographic aspects and the productivity and welfare aspects of development, the mission of the National Population Program encompasses 3 areas: fertility; productivity; and welfare. Strategic policies include the following: abortion is unacceptable as a contraceptive method; the population program shall be non-coercive; and the program shall view individual and family welfare in the context and as the main objective of national socioeconomic programs.

Assessment of the Impact of Teaching Demands on Research Productivity Among Doctoral Nursing Program Faculty.

PubMed

Smeltzer, Suzanne C; Cantrell, Mary Ann; Sharts-Hopko, Nancy C; Heverly, Mary Ann; Jenkinson, Amanda; Nthenge, Serah

2016-01-01

This article reports the findings of a study that examined the research and scholarship productivity of doctorally prepared nursing faculty teaching and mentoring doctoral students and the conflicting demands on them to maintain programs of research and scholarship. The specific aims were to (a) examine the research productivity and scholarship of faculty members teaching in doctoral programs and mentoring doctoral students to examine the perceived effectiveness of existing institutional mechanisms to support scholarship, (b) explore institutional features and personal practices used by doctoral program faculty to develop and maintain research and scholarship productivity, and (c) analyze predictors of scholarship productivity. Data were collected via an on-line researcher-developed survey that examined doctoral faculty roles/responsibilities and their relationship to their scholarly productivity, overall research productivity, and institutional features and personal practices to support research/scholarship activities. Survey respondents reported spending a large amount of time engaged in research-related activities with 58.9% (n = 326) spending anywhere from 6 to 20 hours per week conducting research, writing research-based papers, giving presentations, grant writing, or conducting evidence-based improvement projects. Scholar productivity among the respondents was robust. Personal practices that most strongly supported faculty members' scholarship productivity were the belief that engaging in scholarship made them better teachers and the personal gratification in experiencing doctoral students' successes. A multiple regression analysis conducted to determine predictors of productivity indicated that the strongest predictor was the average number of hours spent on research/scholarship-related activities, followed by time bought out from teaching and other responsibilities of the faculty role for research. Copyright © 2016 Elsevier Inc. All rights reserved.

Template for success: using a resident-designed sign-out template in the handover of patient care.

PubMed

Clark, Clancy J; Sindell, Sarah L; Koehler, Richard P

2011-01-01

Report our implementation of a standardized handover process in a general surgery residency program. The standardized handover process, sign-out template, method of implementation, and continuous quality improvement process were designed by general surgery residents with support of faculty and senior hospital administration using standard work principles and business models of the Virginia Mason Production System and the Toyota Production System. Nonprofit, tertiary referral teaching hospital. General surgery residents, residency faculty, patient care providers, and hospital administration. After instruction in quality improvement initiatives, a team of general surgery residents designed a sign-out process using an electronic template and standard procedures. The initial implementation phase resulted in 73% compliance. Using resident-driven continuous quality improvement processes, real-time feedback enabled residents to modify and improve this process, eventually attaining 100% compliance and acceptance by residents. The creation of a standardized template and protocol for patient handovers might eliminate communication failures. Encouraging residents to participate in this process can establish the groundwork for successful implementation of a standardized handover process. Integrating a continuous quality-improvement process into such an initiative can promote active participation of busy general surgery residents and lead to successful implementation of standard procedures. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

High Efficiency, Clean Combustion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald Stanton

2010-03-31

Energy use in trucks has been increasing at a faster rate than that of automobiles within the U.S. transportation sector. According to the Energy Information Administration (EIA) Annual Energy Outlook (AEO), a 23% increase in fuel consumption for the U.S. heavy duty truck segment is expected between 2009 to 2020. The heavy duty vehicle oil consumption is projected to grow between 2009 and 2050 while light duty vehicle (LDV) fuel consumption will eventually experience a decrease. By 2050, the oil consumption rate by LDVs is anticipated to decrease below 2009 levels due to CAFE standards and biofuel use. In contrast,more » the heavy duty oil consumption rate is anticipated to double. The increasing trend in oil consumption for heavy trucks is linked to the vitality, security, and growth of the U.S. economy. An essential part of a stable and vibrant U.S. economy is a productive U.S. trucking industry. Studies have shown that the U.S. gross domestic product (GDP) is strongly correlated to freight transport. Over 90% of all U.S. freight tonnage is transported by diesel power and over 75% is transported by trucks. Given the vital role that the trucking industry plays in the economy, improving the efficiency of the transportation of goods was a central focus of the Cummins High Efficient Clean Combustion (HECC) program. In a commercial vehicle, the diesel engine remains the largest source of fuel efficiency loss, but remains the greatest opportunity for fuel efficiency improvements. In addition to reducing oil consumption and the dependency on foreign oil, this project will mitigate the impact on the environment by meeting US EPA 2010 emissions regulations. Innovation is a key element in sustaining a U.S. trucking industry that is competitive in global markets. Unlike passenger vehicles, the trucking industry cannot simply downsize the vehicle and still transport the freight with improved efficiency. The truck manufacturing and supporting industries are faced with numerous challenges to reduce oil consumption and greenhouse gases, meet stringent emissions regulations, provide customer value, and improve safety. The HECC program successfully reduced engine fuel consumption and greenhouse gases while providing greater customer valve. The US EPA 2010 emissions standard poses a significant challenge for developing clean diesel powertrains that meet the DoE Vehicle Technologies Multi-Year Program Plan (MYPP) for fuel efficiency improvement while remaining affordable. Along with exhaust emissions, an emphasis on heavy duty vehicle fuel efficiency is being driven by increased energy costs as well as the potential regulation of greenhouse gases. An important element of the success of meeting emissions while significantly improving efficiency is leveraging Cummins component technologies such as fuel injection equipment, aftertreatment, turbomahcinery, electronic controls, and combustion systems. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 55% peak brake thermal efficiency for the engine plus aftertreatment system. The first step in developing high efficiency clean products has been supported by the DoE co-sponsored HECC program. The objectives of the HECC program are: (1) To design and develop advanced diesel engine architectures capable of achieving US EPA 2010 emission regulations while improving the brake thermal efficiency by 10% compared to the baseline (a state of the art 2007 production diesel engine). (2) To design and develop components and subsystems (fuel systems, air handling, controls, etc) to enable construction and development of multi-cylinder engines. (3) To perform an assessment of the commercial viability of the newly developed engine technology. (4) To specify fuel properties conducive to improvements in emissions, reliability, and fuel efficiency for engines using high-efficiency clean combustion (HECC) technologies. To demonstrate the technology is compatible with B20 (biodiesel). (5) To further improve the brake thermal efficiency of the engine as integrated into the vehicle. To demonstrate robustness and commercial viability of the HECC engine technology as integrated into the vehicles. The Cummins HECC program supported the Advanced Combustion Engine R&D and Fuels Technology initiatives of the DoE Vehicle Technologies Multi-Year Program Plan (MYPP). In particular, the HECC project goals enabled the DoE Vehicle Technologies Program (VTP) to meet energy-efficiency improvement targets for advanced combustion engines suitable for passenger and commercial vehicles, as well as addressing technology barriers and R&D needs that are common between passenger and commercial vehicle applications of advanced combustion engines.« less

Performance evaluation of the multiple root node approach to the Rete pattern matcher for production systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sohn, A.; Gaudiot, J.-L.

1991-12-31

Much effort has been expanded on special architectures and algorithms dedicated to efficient processing of the pattern matching step of production systems. In this paper, the authors investigate the possible improvement on the Rete pattern matcher for production systems. Inefficiencies in the Rete match algorithm have been identified, based on which they introduce a pattern matcher with multiple root nodes. A complete implementation of the multiple root node-based production system interpreter is presented to investigate its relative algorithmic behavior over the Rete-based Ops5 production system interpreter. Benchmark production system programs are executed (not simulated) on a sequential machine Sun 4/490more » by using both interpreters and various experimental results are presented. Their investigation indicates that the multiple root node-based production system interpreter would give a maximum of up to 6-fold improvement over the Lisp implementation of the Rete-based Ops5 for the match step.« less

Material properties and their influence on the behaviour of tungsten as plasma facing material

NASA Astrophysics Data System (ADS)

Wirtz, M.; Uytdenhouwen, I.; Barabash, V.; Escourbiac, F.; Hirai, T.; Linke, J.; Loewenhoff, Th.; Panayotis, S.; Pintsuk, G.

2017-06-01

With the aim of a possible improvement of the material specification for tungsten, five different tungsten products by different companies and by different production technologies (forging and rolling) are subject to a materials characterization program. Tungsten produced by forging results in an uniaxial elongated grain shape while rolled products have a plate like grain shape which has an influence on the mechanical properties of the material. The materials were investigated with respect to the following parameters: hardness measurements, microstructural investigations, tensile tests and recrystallisation sensitivity tests at 3 different temperatures. The obtained results show that different production processes have an influence on the resulting anisotropic microstructure and the related material properties of tungsten in the as-received state. Additionally, the recrystallization sensitivity varies between the different products, what could be a result of the different production processes. Additionally, two tungsten products were exposed to thermal shocks. The obtained results show that the improved recrystallisation behaviour has no major impact on the thermal shock performance.

In vitro culture of lavenders (Lavandula spp.) and the production of secondary metabolites.

PubMed

Gonçalves, Sandra; Romano, Anabela

2013-01-01

Lavenders (Lavandula spp., Lamiaceae) are aromatic ornamental plants that are used widely in the food, perfume and pharmaceutical industries. The large-scale production of lavenders requires efficient in vitro propagation techniques to avoid the overexploitation of natural populations and to allow the application of biotechnology-based approaches for plant improvement and the production of valuable secondary metabolites. In this review we discuss micropropagation methods that have been developed in several lavender species, mainly based on meristem proliferation and organogenesis. Specific requirements during stages of micropropagation (establishment, shoot multiplication, root induction and acclimatization) and requisites for plant regeneration trough organogenesis, as an important step for the implementation of plant improvement programs, were revised. We also discuss different methods for the in vitro production of valuable secondary metabolites, focusing on the prospects for highly scalable cultures to meet the market demand for lavender-derived products. Copyright © 2012 Elsevier Inc. All rights reserved.

Improving the Nurse–Family Partnership in Community Practice

PubMed Central

Donelan-McCall, Nancy; O’Brien, Ruth; MacMillan, Harriet; Jack, Susan; Jenkins, Thomas; Dunlap, Wallace P.; O’Fallon, Molly; Yost, Elly; Thorland, Bill; Pinto, Francesca; Gasbarro, Mariarosa; Baca, Pilar; Melnick, Alan; Beeber, Linda

2013-01-01

BACKGROUND: Evidence-based preventive interventions are rarely final products. They have reached a stage of development that warrant public investment but require additional research and development to strengthen their effects. The Nurse-Family Partnership (NFP), a program of nurse home visiting, is grounded in findings from replicated randomized controlled trials. OBJECTIVE: Evidence-based programs require replication in accordance with the models tested in the original randomized controlled trials in order to achieve impacts comparable to those found in those trials, and yet they must be changed in order to improve their impacts, given that interventions require continuous improvement. This article provides a framework and illustrations of work our team members have developed to address this tension. METHODS: Because the NFP is delivered in communities outside of research contexts, we used quantitative and qualitative research to identify challenges with the NFP program model and its implementation, as well as promising approaches for addressing them. RESULTS: We describe a framework used to address these issues and illustrate its use in improving nurses’ skills in retaining participants, reducing closely spaced subsequent pregnancies, responding to intimate partner violence, observing and promoting caregivers’ care of their children, addressing parents’ mental health problems, classifying families’ risks and strengths as a guide for program implementation, and collaborating with indigenous health organizations to adapt and evaluate the program for their populations. We identify common challenges encountered in conducting research in practice settings and translating findings from these studies into ongoing program implementation. CONCLUSIONS: The conduct of research focused on quality improvement, model improvement, and implementation in NFP practice settings is challenging, but feasible, and holds promise for improving the impact of the NFP. PMID:24187112

Effective and Innovative Practices for Stronger Facilities Management.

ERIC Educational Resources Information Center

Banick, Sarah

2002-01-01

Describes the five winners of the APPA's Effective & Innovative Practices Award. These facilities management programs and processes were recognized for enhancing service delivery, lowering costs, increasing productivity, improving customer service, generating revenue, or otherwise benefiting the educational institution. (EV)

NANOFILTRATION FOR REMOVAL OF DRINKING WATER DISINFECTION BY-PRODUCT PRCURSORS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

Pilot testing of SHRP 2 reliability data and analytical products: Washington.

DOT National Transportation Integrated Search

2014-07-30

The second Strategic Highway Research Program (SHRP 2) addresses the challenges of moving people and goods efficiently and safely on the nations highways. In its Reliability focus area, the research emphasizes improving the reliability of highway ...

Intellectual Disability and Assistive Technology: Opening the GATE Wider.

PubMed

Boot, Fleur Heleen; Dinsmore, John; Khasnabis, Chapal; MacLachlan, Malcolm

2017-01-01

The World Health Organization has launched a program to promote Global Cooperation on Assistive Technology (GATE). The objective of the GATE program is to improve access to high quality, affordable assistive technology for people with varying disabilities, diseases, and age-related conditions. As a first step, GATE has developed the assistive products list, a list of priority assistive products based on addressing the greatest need at population level. A specific group of people who can benefit from user appropriate assistive technology are people with intellectual disabilities. However, the use of assistive products by people with intellectual disabilities is a neglected area of research and practice, and offers considerable opportunities for the advancement of population health and the realization of basic human rights. It is unknown how many people with intellectual disabilities globally have access to appropriate assistive products and which factors influence their access. We call for a much greater focus on people with intellectual disabilities within the GATE program. We present a framework for understanding the complex interaction between intellectual disability, health and wellbeing, and assistive technology.

Process, Not Product: Investigating Recommendations for Improving Citizen Science “Success”

PubMed Central

Freitag, Amy; Pfeffer, Max J.

2013-01-01

Citizen science programs are increasingly popular for a variety of reasons, from public education to new opportunities for data collection. The literature published in scientific journals resulting from these projects represents a particular perspective on the process. These articles often conclude with recommendations for increasing “success”. This study compared these recommendations to those elicited during interviews with program coordinators for programs within the United States. From this comparison, success cannot be unilaterally defined and therefore recommendations vary by perspective on success. Program coordinators tended to have more locally-tailored recommendations specific to particular aspects of their program mission. PMID:23691154

Development of advanced magnetic resonance sensor for industrial applications. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Los Santos, A.

1997-06-01

Southwest Research Institute (SwRI) and various subcontractors, in a cooperative agreement with the DOE, have developed and tested an advanced magnetic resonance (MR) sensor for several industrial applications and made various market surveys. The original goal of the program was to develop an advanced moisture sensor to allow more precise and rapid control of drying processes so that energy and/or product would not be wasted. Over the course of the program, it was shown that energy savings were achievable but in many processes the return in investment did not justify the cost of a magnetic resonance sensor. However, in manymore » processes, particularly chemical, petrochemical, paper and others, the return in investment can be very high as to easily justify the cost of a magnetic resonance sensor. In these industries, substantial improvements in product yield, quality, and efficiency in production can cause substantial energy savings and reductions in product wastage with substantial environmental effects. The initial applications selected for this program included measurement of corn gluten at three different points and corn germ at one point in an American Maize corn processing plant. During the initial phases (I and II) of this program, SwRI developed a prototype advanced moisture sensor utilizing NMR technology capable of accurately and reliably measuring moisture in industrial applications and tested the sensor in the laboratory under conditions simulating on-line products in the corn wet milling industry. The objective of Phase III was to test the prototype sensor in the plant environment to determine robustness, reliability and long term stability. Meeting these objectives would permit extended field testing to improve the statistical database used to calibrate the sensor and subject the sensor to true variations in operating conditions encountered in the process rather than those which could only be simulated in the laboratory.« less

Video: useful tool for delivering family planning messages.

PubMed

Sumarsono, S K

1985-10-01

In 1969, the Government of Indonesia declared that the population explosion was a national problem. The National Family Planning Program was consequently launched to encourage adoption of the ideal of a small, happy and prosperous family norm. Micro-approach messages are composed of the following: physiology of menstruation; reproductive process; healthy pregnancy; rational family planning; rational application of contraceptives; infant and child care; nutrition improvement; increase in breastfeeding; increase in family income; education in family life; family health; and deferred marriage age. Macro-approach messages include: the population problem and its impact on socioeconomic aspects; efforts to cope with the population problem; and improvement of women's lot. In utilizing the media and communication channels, the program encourages the implementation of units and working units of IEC to produce IEC materials; utilizes all possible existing media and IEC channels; maintains the consistent linkage between the activity of mass media and the IEC activities in the field; and encourages the private sector to participate in the production of IEC media and materials. A media production center was set up and carries out the following activities: producing video cassettes for tv broadcasts of family planning drama, family planning news, and tv spots; producing duplicates of the video cassettes for distribution to provinces in support of the video network; producing teaching materials for family planning workers; and transfering family planning films into video cassettes. A video network was developed and includes video monitors in family planning service points such as hospitals, family planning clinics and public places like bus stations. In 1985, the program will be expanded by 50 mobile information units equipped with video monitors. Video has potentials to increase the productivity and effectiveness of the family planning program. The video production process is cheaper and simpler than film production. Video will be very helpful as a communication aid in group meetings. It can also be used as a teaching aid for training.

EOS MLS Level 1B Data Processing, Version 2.2

NASA Technical Reports Server (NTRS)

Perun, Vincent; Jarnot, Robert; Pickett, Herbert; Cofield, Richard; Schwartz, Michael; Wagner, Paul

2009-01-01

A computer program performs level- 1B processing (the term 1B is explained below) of data from observations of the limb of the Earth by the Earth Observing System (EOS) Microwave Limb Sounder (MLS), which is an instrument aboard the Aura spacecraft. This software accepts, as input, the raw EOS MLS scientific and engineering data and the Aura spacecraft ephemeris and attitude data. Its output consists of calibrated instrument radiances and associated engineering and diagnostic data. [This software is one of several computer programs, denoted product generation executives (PGEs), for processing EOS MLS data. Starting from level 0 (representing the aforementioned raw data, the PGEs and their data products are denoted by alphanumeric labels (e.g., 1B and 2) that signify the successive stages of processing.] At the time of this reporting, this software is at version 2.2 and incorporates improvements over a prior version that make the code more robust, improve calibration, provide more diagnostic outputs, improve the interface with the Level 2 PGE, and effect a 15-percent reduction in file sizes by use of data compression.

Producer farmer’s sovereignty in dry land and swamps areas

NASA Astrophysics Data System (ADS)

Suhaeti, RN; Wahyuni, S.

2018-01-01

Farmers could perform their farming if they have sovereignty on their farming production inputs and marketing. Suboptimal land, such as dry land and swamps areas have good prospect if applying appropriate technologies. A research in 2015, on status of farmers’ sovereignty, had been conducted in Piani and North Candi Laras Subdistricts, Tapin District, South Borneo Province, representing swamp land and dry land respectively. Data and information were obtained through interviewing related agencies at provincial and district levels and 30 units of farmer’s households. The primary and secondary data were analyzed descriptively. The research results showed that farmers in swamps and dry land were categorized as large farmers and had sovereignty over the land and production. Water shortage and excessive in both land types could be overcome by giving access on appropriate technology such as programs making farmers improve their farming techniques and providing levees. In addition, land certification program, farming expansion and constructing new irrigated lowland were also some efforts to improve farmers’ sovereignty. It was crucial to identify and improve farmer’s sovereignty indicators through research in larger sites and samples.

EMPRESS: A European Project to Enhance Process Control Through Improved Temperature Measurement

NASA Astrophysics Data System (ADS)

Pearce, J. V.; Edler, F.; Elliott, C. J.; Rosso, L.; Sutton, G.; Andreu, A.; Machin, G.

2017-08-01

A new European project called EMPRESS, funded by the EURAMET program `European Metrology Program for Innovation and Research,' is described. The 3 year project, which started in the summer of 2015, is intended to substantially augment the efficiency of high-value manufacturing processes by improving temperature measurement techniques at the point of use. The project consortium has 18 partners and 5 external collaborators, from the metrology sector, high-value manufacturing, sensor manufacturing, and academia. Accurate control of temperature is key to ensuring process efficiency and product consistency and is often not achieved to the level required for modern processes. Enhanced efficiency of processes may take several forms including reduced product rejection/waste; improved energy efficiency; increased intervals between sensor recalibration/maintenance; and increased sensor reliability, i.e., reduced amount of operator intervention. Traceability of temperature measurements to the International Temperature Scale of 1990 (ITS-90) is a critical factor in establishing low measurement uncertainty and reproducible, consistent process control. Introducing such traceability in situ (i.e., within the industrial process) is a theme running through this project.

Government funding for HIV not keeping pace with epidemic.

PubMed

1999-05-14

In April 1999, UNAIDS warned that government spending has failed to keep up with the global spread of AIDS. Although the U.S. is the largest funder of international AIDS programs among industrialized nations, Norway and the Netherlands ranked first and second, respectively, with respect to the portion of their gross national product spent on these programs. The United States gave only $17 for each $1 million of its gross national product, compared with Norway's $93 and the Netherlands' $92 per $1 million. UNAIDS executive director Peter Piot cautioned that, in order to effectively improve conditions in developing nations, more must be invested in the fight against AIDS.

Application Of Artificial Intelligence To Wind Tunnels

NASA Technical Reports Server (NTRS)

Lo, Ching F.; Steinle, Frank W., Jr.

1989-01-01

Report discusses potential use of artificial-intelligence systems to manage wind-tunnel test facilities at Ames Research Center. One of goals of program to obtain experimental data of better quality and otherwise generally increase productivity of facilities. Another goal to increase efficiency and expertise of current personnel and to retain expertise of former personnel. Third goal to increase effectiveness of management through more efficient use of accumulated data. System used to improve schedules of operation and maintenance of tunnels and other equipment, assignment of personnel, distribution of electrical power, and analysis of costs and productivity. Several commercial artificial-intelligence computer programs discussed as possible candidates for use.

Engineering Design Education Program for Graduate School

NASA Astrophysics Data System (ADS)

Ohbuchi, Yoshifumi; Iida, Haruhiko

The new educational methods of engineering design have attempted to improve mechanical engineering education for graduate students in a way of the collaboration in education of engineer and designer. The education program is based on the lecture and practical exercises concerning the product design, and has engineering themes and design process themes, i.e. project management, QFD, TRIZ, robust design (Taguchi method) , ergonomics, usability, marketing, conception etc. At final exercise, all students were able to design new product related to their own research theme by applying learned knowledge and techniques. By the method of engineering design education, we have confirmed that graduate students are able to experience technological and creative interest.

The National Shipbuilding Research Program, 1991 Ship Production Symposium Proceedings: Paper No. IVA-3: Improving Your Competitive Position Through Total Quality Management (TQM)

DTIC Science & Technology

1991-09-01

process of TQM, it will expect help from suppliers in the pursuit of increased product and service quality . So if your customers are describing their...customer expectations typically prompt the changes. Remaining competitive in today’s global economy requires an increased level of product and service ... quality at lower cost. In government the motivation often arises from Presidential Order #12552, or more importantly, con- strained budgets. The

Introduction to NASA Symposium on Productivity and Quality

NASA Technical Reports Server (NTRS)

Braunstein, David

1984-01-01

The discussions will concentrate on white-collar organizational issues common to large organizations. The program will address a number of management issues for improving our nation's productivity and quality, and therefore its competitive position. executives have contributed their time to share /their experience with you. In addition, the American Institute of Astronautics & Aeronautics corporate members have helped to organize the sessions. I am most grateful for this support. The NASA Administrator has set the goal for NASA to become a leader in productivity and quality.

NASA's Agricultural Program: A USDA/Grower Partnership

NASA Technical Reports Server (NTRS)

McKellip, Rodney; Thomas, Michael

2002-01-01

Ag20/20 is a partnership between USDA, NASA, and four national commodity associations. It is driven by the information needs of U.S. farmers. Ag20/20 is focused on utilization of earth science and remote sensing for decision-making and oriented toward economically viable operational solutions. Its purpose is to accelerate the use of remote sensing and other geospatial technologies on the farm to: 1) Increase the production efficiency of the American farmer; 2) Reduce crop production risks; 3) Improve environmental stewardship tools for agricultural production.

U.S. Department of Energy’s Industrial Technology Program and Its Impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.; Roop, Joseph M.

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environ-mental performance, product quality, and productivity. To help ITP determine the impacts of its pro-grams, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP pro-gram benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commer-cialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the newmore » technolo¬gies, and estimates air pollution and carbon emission reductions. This paper discusses the results of PNNL’s most recent review (conducted in 2009). From 1976-2008, the commercialized technologies from ITP’s research and development programs and other activities have cumulatively saved 9.27 quadrillion Btu, with a net cost savings of $63.91 billion.« less

U.S. Department of Energy’s Industrial Technologies Program and Its Impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.; Brown, Scott A.

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environ-mental performance, product quality, and productivity. To help ITP determine the impacts of its pro-grams, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP pro-gram benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commer-cialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the newmore » technolo-gies, and estimates air pollution and carbon emission reductions. This paper discusses the results of PNNL’s most recent review (conducted in 2010). From 1976-2009, the commercialized technologies from ITP’s research and development programs and other activities have cumulatively saved 10.0 quadrillion Btu, with a net cost savings of $61.82 billion.« less

U.S. Department of Energy’s Industrial Technology Program and Its Impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.; Roop, Joseph M.

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environ-mental performance, product quality, and productivity. To help ITP determine the impacts of its pro-grams, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP pro-gram benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commer-cialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the newmore » technolo¬gies, and estimates air pollution and carbon emission reductions. This paper discusses the results of PNNL’s most recent review (conducted in 2008). From 1976-2007, the commercialized technologies from ITP’s research and development programs and other activities have cumulatively saved 6.17 quadrillion Btu, with a net cost savings of $63.0 billion.« less

U. S. Department of Energy (DOE) Industrial Programs and Their Impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.; Roop, Joseph M.

The U.S. Department of Energy's Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environmental performance, product quality, and productivity. To help ITP determine the impacts of its programs, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP program benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commercialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the newmore » technologies, and estimates air pollution and carbon emission reductions. This paper discusses the results of the most recent PNNL review (conducted in 2003). From 1976-2002, the commercialized technologies from ITP's R&D programs and other activities have cumulatively saved 3.7 quadrillion Btu, with a net cost savings of $14.6 billion.« less

U.S. Department of Energy (DOE) Industrial Programs and Their Impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.; Roop, Joseph M.

The U.S. Department of Energy’s Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not only use energy and materials more efficiently but also improve environmental performance, product quality, and productivity. To help ITP determine the impacts of its programs, Pacific Northwest National Laboratory (PNNL) periodically reviews and analyzes ITP program benefits. PNNL contacts vendors and users of ITP-sponsored technologies that have been commercialized, estimates the number of units that have penetrated the market, conducts engineering analyses to estimate energy savings from the newmore » technologies, and estimates air pollution and carbon emission reductions. This paper discusses the results of the most recent PNNL review (conducted in 2005). From 1976-2004, the commercialized technologies from ITP’s research and development (R&D) programs and other activities have cumulatively saved 4.72 quadrillion Btu, with a net cost savings of $23.1 billion.« less

Photographic and photometric enhancement of Lunar Orbiter products, projects A, B and C

NASA Technical Reports Server (NTRS)

1972-01-01

A detailed discussion is presented of the framelet joining, photometric data improvement, and statistical error analysis. The Lunar Orbiter film handling system, readout system, and the digitization are described, along with the technique of joining adjacent framelets by a using a digital computer. Time and cost estimates are given. The problems and techniques involved in improving the digitized data are discussed. It was found that spectacular improvements are possible. Program documentations are included.

Optimization of Deep Drilling Performance - Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2005-09-30

This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2004 through September 2005. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for amore » next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all Phase 1 testing and is planning Phase 2 development.« less

Implementing quality/productivity improvement initiatives in an engineering environment

NASA Technical Reports Server (NTRS)

Ruda, R. R.

1985-01-01

Quality/Productivity Improvement (QPI) initiatives in the engineering environment at McDonnell Douglas-Houston include several different, distinct activities, each having its own application, yet all targeted toward one common goal - making continuous improvement a way of life. The chief executive and the next two levels of management demonstrate their commitment to QPI with hands-on involvement in several activities. Each is a member of a QPI Council which consists of six panels - Participative Management, Communications, Training, Performance/Productivity, Human Resources Management and Strategic Management. In addition, each manager conducts Workplace Visits and Bosstalks, to enhance communications with employees and to provide a forum for the identification of problems - both real and perceived. Quality Circles and Project Teams are well established within McConnel Douglas as useful and desirable employee involvement teams. The continued growth of voluntary membership in the circles program is strong evidence of the employee interest and management support that have developed within the organization.

New techniques for positron emission tomography in the study of human neurological disorders. Progress report, June 1990--June 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhl, D.E.

1993-06-01

This progress report describes accomplishments of four programs. The four programs are entitled (1) Faster,simpler processing of positron-computing precursors: New physicochemical approaches, (2) Novel solid phase reagents and methods to improve radiosynthesis and isotope production, (3) Quantitative evaluation of the extraction of information from PET images, and (4) Optimization of tracer kinetic methods for radioligand studies in PET.

[Marketing as a tool to increase the effectiveness of public health plans. 2008 SESPAS Report].

PubMed

Beerli-Palacio, Asunción; Martín-Santana, Josefa D; Porta, Miquel

2008-04-01

Recent years have seen a steady increase in social marketing applied to health with the aim of increasing public awareness and changing people's behavior. Programs or actions based on the principles of social marketing have been shown to be effective in improving public health. However, that is not the general rule in Spain, where health policies have been based on health plans directed more to economic efficiency than to citizens' needs. For a health marketing program to be effective, the following factors are necessary: 1) the program has a long-term temporal horizon for action; 2) the objectives are established in terms of behavioral changes; 3) market research is used as a source of information; 4) different actions are established according to the segments identified as targets; 5) the program is operationalized in the four variables of the marketing mix, namely, product, price, distribution and communication, and is not only based on advertising campaigns; 6) the core of the program is exchange, understood as the factors that motivate people to change in return for the promise of something beneficial to them; 7) the factors or forces that compete with the desired behavioral changes are neutralized, and 8) businesses' social responsibility is used as a mechanism to reinforce health improvement programs. The design of health marketing programs should include definition of strategic and operational actions aimed not only at potential adopters of the desired behavior but also at all agents who may help or hinder behavioral change (health professionals, the pharmaceutical industry, politicians, the advertising industry, and products and services with health-challenging objectives).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romm, J.J.

Many American companies have found that saving energy and cutting pollution dramatically improves the bottom line. But beyond these gains, businesses that launch energy efficiency programs to save money are often astonished to discover unforeseen benefits: energy efficient lighting, heating, cooling, motors, and industrial processes can increase worker productivity, decrease absenteeism, and improve the quality of work performed. Profits created by the jump in worker productivity can exceed energy savings by a factor of ten. Energy efficiency and pollution prevention represent the next wave in manufacturing, following the quality revolution launched by the Japanese in the 1960s. Unless America leadsmore » the lean and clean revolution, economic health will be undermined as other countries develop clean processes and products and US companies suffer competitively. Also, developing countries will leapfrog their wasteful model and buy products and manufacturing processes from foreign firms already practicing lean and clean.« less

Varying rotation lengths in northern production forests: Implications for habitats provided by retention and production trees.

PubMed

Felton, Adam; Sonesson, Johan; Nilsson, Urban; Lämås, Tomas; Lundmark, Tomas; Nordin, Annika; Ranius, Thomas; Roberge, Jean-Michel

2017-04-01

Because of the limited spatial extent and comprehensiveness of protected areas, an increasing emphasis is being placed on conserving habitats which promote biodiversity within production forest. For this reason, alternative silvicultural programs need to be evaluated with respect to their implications for forest biodiversity, especially if these programs are likely to be adopted. Here we simulated the effect of varied rotation length and associated thinning regimes on habitat availability in Scots pine and Norway spruce production forests, with high and low productivity. Shorter rotation lengths reduced the contribution made by production trees (trees grown for industrial use) to the availability of key habitat features, while concurrently increasing the contribution from retention trees. The contribution of production trees to habitat features was larger for high productivity sites, than for low productivity sites. We conclude that shortened rotation lengths result in losses of the availability of habitat features that are key for biodiversity conservation and that increased retention practices may only partially compensate for this. Ensuring that conservation efforts better reflect the inherent variation in stand rotation lengths would help improve the maintenance of key forest habitats in production forests.

Impact of a drug-free program on broiler chicken growth performances, gut health, Clostridium perfringens and Campylobacter jejuni occurrences at the farm level.

PubMed

Gaucher, M-L; Quessy, S; Letellier, A; Arsenault, J; Boulianne, M

2015-08-01

The use of antimicrobial agents as feed additives in poultry production is a public health concern due to the overall increase in antimicrobial resistance. Although some alternative products are commercially available, little is known on their potential impact on flock health and productivity. A prospective study involving 1.55 million birds was conducted on eight commercial broiler farms in Québec, Canada, to evaluate the impact of replacing antibiotic growth promoters and anticoccidial drugs by a drug-free program including improved brooding conditions, anticoccidial vaccination, essential oil-based feed additives, and water acidification. Various productivity and health parameters were compared between barns allocated to the conventional and the drug-free program. Zootechnical performances were monitored as productivity criteria. Clinical necrotic enteritis and subclinical enteritis occurrences, litter and fecal moistures content were measured, and microscopic gut health was evaluated. Clostridium perfringens and Campylobacter spp. strains were recovered from fecal samples collected during farm visits. Clostridium perfringens counts were used as poultry health indicators and Campylobacter prevalence was noted as well. The drug-free program was associated with a significant increase in feed conversion ratio and a decrease in mean live weight at slaughter and in daily weight gain. An increased incidence of necrotic enteritis outbreaks and subclinical enteritis cases, as well as an increase in litter moisture content at the end of the rearing period were also observed for this program. Mean microscopic intestinal lesion scores and prevalence of Campylobacter colonization were not statistically different between the two groups but the drug-free program was associated with higher Clostridium perfringens isolation rates. According to the current study design, the results suggest that substitution of antibiotic growth promoters and anticoccidial drugs by a drug-free program impacts various broiler chicken production parameters and Clostridium perfringens carriage levels. © 2015 Poultry Science Association Inc.

Challenges and strategies in applying performance measurement to federal public health programs.

PubMed

DeGroff, Amy; Schooley, Michael; Chapel, Thomas; Poister, Theodore H

2010-11-01

Performance measurement is widely accepted in public health as an important management tool supporting program improvement and accountability. However, several challenges impede developing and implementing performance measurement systems at the federal level, including the complexity of public health problems that reflect multiple determinants and involve outcomes that may take years to achieve, the decentralized and networked nature of public health program implementation, and the lack of reliable and consistent data sources and other issues related to measurement. All three of these challenges hinder the ability to attribute program results to specific public health program efforts. The purpose of this paper is to explore these issues in detail and offer potential solutions that support the development of robust and practical performance measures to meet the needs for program improvement and accountability. Adapting performance measurement to public health programs is both an evolving science and art. Through the strategies presented here, appropriate systems can be developed and monitored to support the production of meaningful data that will inform effective decision making at multiple levels. Published by Elsevier Ltd.

Emergency radiobioassay preparedness exercises through the NIST radiochemistry intercomparison program.

PubMed

Nour, Svetlana; LaRosa, Jerry; Inn, Kenneth G W

2011-08-01

The present challenge for the international emergency radiobioassay community is to analyze contaminated samples rapidly while maintaining high quality results. The National Institute of Standards and Technology (NIST) runs a radiobioassay measurement traceability testing program to evaluate the radioanalytical capabilities of participating laboratories. The NIST Radiochemistry Intercomparison Program (NRIP) started more than 10 years ago, and emergency performance testing was added to the program seven years ago. Radiobioassay turnaround times under the NRIP program for routine production and under emergency response scenarios are 60 d and 8 h, respectively. Because measurement accuracy and sample turnaround time are very critical in a radiological emergency, response laboratories' analytical systems are best evaluated and improved through traceable Performance Testing (PT) programs. The NRIP provides participant laboratories with metrology tools to evaluate their performance and to improve it. The program motivates the laboratories to optimize their methodologies and minimize the turnaround time of their results. Likewise, NIST has to make adjustments and periodical changes in the bioassay test samples in order to challenge the participating laboratories continually. With practice, radioanalytical measurements turnaround time can be reduced to 3-4 h.

Severe Storms Branch research report (April 1984 April 1985)

NASA Technical Reports Server (NTRS)

Dubach, L. (Editor)

1985-01-01

The Mesoscale Atmospheric Processes Research Program is a program of integrated studies which are to achieve an improved understanding of the basic behavior of the atmosphere through the use of remotely sensed data and space technology. The program consist of four elements: (1) special observations and analysis of mesoscale systems; (20 the development of quanitative algorithms to use remotely sensed observations; (3) the development of new observing systems; and (4) numerical modeling. The Severe Storms Branch objectives are the improvement of the understanding, diagnosis, and prediction of a wide range of atmospheric storms, which includes severe thunderstorms, tornadoes, flash floods, tropical cyclones, and winter snowstorms. The research often shed light upon various aspects of local weather, such as fog, sea breezes, air pollution, showers, and other products of nonsevere cumulus cloud clusters. The part of the program devoted to boundary layer processes, gust front interactions, and soil moisture detection from satellites gives insights into storm growth and behavior.

Forebody/Inlet of the Joint Strike Fighter Tested at Low Speeds

NASA Technical Reports Server (NTRS)

Johns, Albert L.

1998-01-01

As part of a national cooperative effort to develop a multinational fighter aircraft, a model of a Joint Strike Fighter concept was tested in several NASA Lewis Research Center wind tunnels at low speeds over a range of headwind velocities and model attitudes. This Joint Strike Fighter concept, which is scheduled to go into production in 2005, will greatly improve the range, capability, maneuverability, and survivability of fighter aircraft, and the production program could ultimately be worth $100 billion. The test program was a team effort between Lewis and Lockheed Martin Tactical Aircraft Systems. Testing was completed in September 1997, several weeks ahead of schedule, allowing Lockheed additional time to review the results and analysis data before the next test and resulting in significant cost savings for Lockheed. Several major milestones related to dynamic and steady-state data acquisition and overall model performance were reached during this model test. Results from this program will contribute to both the concept demonstration phase and the production aircraft.

Workplace Literacy in a Total Quality Management Environment for the Manufacturing Industry in Chicago and Northern Illinois. Final Performance Report.

ERIC Educational Resources Information Center

Mrowicki, Linda; And Others

A project was conducted to improve the productivity and efficiency of 10 manufacturers by providing workplace literacy instruction to workers lacking basic skills required for their jobs, and to improve the capability of educational programs to meet the basic skill needs of the manufacturing industry by developing an evaluation manual for basic…

ENVIRONMENTAL TECHNOLOGY VERIFICATION OF BAGHOUSE FILTRATION PRODUCTS

EPA Science Inventory

The Environmental Technology Verification Program (ETV) was started by EPA in 1995 to generate independent credible data on the performance of innovative technologies that have potential to improve protection of public health and the environment. ETV does not approve or certify p...

Genomics to feed a switchgrass breeding program

USDA-ARS?s Scientific Manuscript database

Development of improved cultivars is one of three pillars, along with sustainable production and efficient conversion, required for dedicated cellulosic bioenergy crops to succeed. Breeding new cultivars is a long, slow process requiring patience, dedication, and motivation to realize gains and adva...

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... determining whether to continue, modify, or terminate an information technology program or project. (iii... technology to improve productivity in the Department. (P) Plan, develop, install, and operate computer-based systems for message exchange, scheduling, computer conferencing, televideo technologies, and other...

PRN 83-3: Label Improvement Program - Storage and Disposal Label Statements

EPA Pesticide Factsheets

This Notice is to inform all registrants that the label of all pesticide products must include updated storage and disposal statements. No application for amended registration is required if you use the exact wording contained in this Notice.

Drug-device combination products in the twenty-first century: epinephrine auto-injector development using human factors engineering.

PubMed

Edwards, Eric S; Edwards, Evan T; Simons, F Estelle R; North, Robert

2015-05-01

The systematic application of human factors engineering (HFE) principles to the development of drug-device combination products, including epinephrine auto-injectors (EAIs), has the potential to improve the effectiveness and safety of drug administration. A PubMed search was performed to assess the role of HFE in the development of drug-device combination products. The following keywords were used in different combinations: 'human factors engineering,' 'human factors,' 'medical products,' 'epinephrine/adrenaline auto-injector,' 'healthcare' and 'patient safety.' This review provides a summary of HFE principles and their application to the development of drug-device combination products as advised by the US FDA. It also describes the HFE process that was applied to the development of Auvi-Q, a novel EAI, highlighting specific steps that occurred during the product-development program. For drug-device combination products, device labeling and usability are critical and have the potential to impact clinical outcomes. Application of HFE principles to the development of drug-delivery devices has the potential to improve product quality and reliability, reduce risk and improve patient safety when applied early in the development process. Additional clinical and real-world studies will confirm whether the application of HFE has helped to develop an EAI that better meets the needs of patients at risk of anaphylaxis.

Process evaluation of the Regional Biomass Energy Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, C.R.; Brown, M.A.; Perlack, R.D.

1994-03-01

The U.S. Department of Energy (DOE) established the Regional Biomass Energy Program (RBEP) in 1983 to increase the production and use of biomass energy resources. Through the creation of five regional program (the Great Lakes, Northeast, Pacific Northwest, Southeast, and West), the RBEP focuses on regionally specific needs and opportunities. In 1992, Oak Ridge National (ORNL) conducted a process evaluation of the RBEP Program designed to document and explain the development of the goals and strategies of the five regional programs; describe the economic and market context surrounding commercialization of bioenergy systems; assess the criteria used to select projects; describemore » experiences with cost sharing; identify program accomplishments in the transfer of information and technology; and offer recommendations for program improvement.« less

Developmental programming: the concept, large animal models, and the key role of uteroplacental vascular development.

PubMed

Reynolds, L P; Borowicz, P P; Caton, J S; Vonnahme, K A; Luther, J S; Hammer, C J; Maddock Carlin, K R; Grazul-Bilska, A T; Redmer, D A

2010-04-01

Developmental programming refers to the programming of various bodily systems and processes by a stressor of the maternal system during pregnancy or during the neonatal period. Such stressors include nutritional stress, multiple pregnancy (i.e., increased numbers of fetuses in the gravid uterus), environmental stress (e.g., high environmental temperature, high altitude, prenatal steroid exposure), gynecological immaturity, and maternal or fetal genotype. Programming refers to impaired function of numerous bodily systems or processes, leading to poor growth, altered body composition, metabolic dysfunction, and poor productivity (e.g., poor growth, reproductive dysfunction) of the offspring throughout their lifespan and even across generations. A key component of developmental programming seems to be placental dysfunction, leading to altered fetal growth and development. We discuss various large animal models of developmental programming and how they have and will continue to contribute to our understanding of the mechanisms underlying altered placental function and developmental programming, and, further, how large animal models also will be critical to the identification and application of therapeutic strategies that will alleviate the negative consequences of developmental programming to improve offspring performance in livestock production and human medicine.

A program-management plan with critical-path definition for Combustion Augmentation with Thermionic Energy Conversion (CATEC)

NASA Technical Reports Server (NTRS)

Morris, J. F.; Merrill, O. S.; Reddy, H. K.

1981-01-01

Thermionic energy conversion (TEC) is discussed. In recent TEC-topping analyses, overall plant efficiency (OPE) and cost of electricity (COE) improved slightly with current capabilities and substantially with fully matured technologies. Enhanced credibility derives from proven hot-corrosion protection for TEC by silicon-carbide clads in fossil fuel combustion products. Combustion augmentation with TEC (CATEC) affords minimal cost and plant perturbation, but with smaller OPE and COE improvements than more conventional topping applications. Risk minimization as well as comparative simplicity and convenience, favor CATEC for early market penetration. A program-management plan is proposed. Inputs, characteristics, outputs and capabilities are discussed.

A program-management plan with critical-path definition for Combustion Augmentation with Thermionic Energy Conversion (CATEC)

NASA Astrophysics Data System (ADS)

Morris, J. F.; Merrill, O. S.; Reddy, H. K.

Thermionic energy conversion (TEC) is discussed. In recent TEC-topping analyses, overall plant efficiency (OPE) and cost of electricity (COE) improved slightly with current capabilities and substantially with fully matured technologies. Enhanced credibility derives from proven hot-corrosion protection for TEC by silicon-carbide clads in fossil fuel combustion products. Combustion augmentation with TEC (CATEC) affords minimal cost and plant perturbation, but with smaller OPE and COE improvements than more conventional topping applications. Risk minimization as well as comparative simplicity and convenience, favor CATEC for early market penetration. A program-management plan is proposed. Inputs, characteristics, outputs and capabilities are discussed.

Optimizing the post-graduate institutional program evaluation process.

PubMed

Lypson, Monica L; Prince, Mark E P; Kasten, Steven J; Osborne, Nicholas H; Cohan, Richard H; Kowalenko, Terry; Dougherty, Paul J; Reynolds, R Kevin; Spires, M Catherine; Kozlow, Jeffrey H; Gitlin, Scott D

2016-02-17

Reviewing program educational efforts is an important component of postgraduate medical education program accreditation. The post-graduate review process has evolved over time to include centralized oversight based on accreditation standards. The institutional review process and the impact on participating faculty are topics not well described in the literature. We conducted multiple Plan-Do-Study-Act (PDSA) cycles to identify and implement areas for change to improve productivity in our institutional program review committee. We also conducted one focus group and six in-person interviews with 18 committee members to explore their perspectives on the committee's evolution. One author (MLL) reviewed the transcripts and performed the initial thematic coding with a PhD level research associate and identified and categorized themes. These themes were confirmed by all participating committee members upon review of a detailed summary. Emergent themes were triangulated with the University of Michigan Medical School's Admissions Executive Committee (AEC). We present an overview of adopted new practices to the educational program evaluation process at the University of Michigan Health System that includes standardization of meetings, inclusion of resident members, development of area content experts, solicitation of committed committee members, transition from paper to electronic committee materials, and focus on continuous improvement. Faculty and resident committee members identified multiple improvement areas including the ability to provide high quality reviews of training programs, personal and professional development, and improved feedback from program trainees. A standing committee that utilizes the expertise of a group of committed faculty members and which includes formal resident membership has significant advantages over ad hoc or other organizational structures for program evaluation committees.

Defense Logistics Agency Can Improve Its Product Quality Deficiency Report Processing

DTIC Science & Technology

2015-07-01

Contracts for M2 Machine Gun Spare Parts in Support of Operations in Southwest Asia,” January 11, 2010 Appendixes DODIG-2015-140 │ 29 Appendix B...personnel are adequately processing product quality deficiency reports and identifying the root cause for defective spare parts . This is the first...quality deficiency report program and prevents meaningful analysis of the primary causes of spare- part quality deficiencies. In addition, the

[Challenges and countermeasures of forestry schistosomiasis control programs in ecological priority of Yangtze River economic belt development].

PubMed

Ning, Su; Yong-Jie, Xu

2016-12-13

Relevant projects carried out within the Yangtze River economic belt on the impact of schistosomiasis epidemic and transmission are important issues for "ecological priority" in the process of implementing the strategy. The key problems of schistosomiasis epidemic risk, epidemic happening repeatedly, difficulty of rehabilitating Oncomelania hupensis snail control and schistosomiasis prevention forest, lag of evaluation system and platform construction, lack of basic research, et al. were analyzed in the Yangtze River economic belt taking "ecological priority" as the basis in this paper. Then corresponding countermeasures to these challenges were put forward so as to provide the reference for the national forestry schistosomiasis control programs, which include: execution of the comprehensive prevention and control strategy, scheming of the new round of forestry schistosomiasis control programs, strengthening schistosomiasis prevention and control, promoting productivity in existing forestry to consolidate and improve the achievements of previous forestry schistosomiasis control programs, and promoting the intensity of technological innovation to improve the technological level of forestry schistosomiasis control programs.

Aviation Weather Information Requirements Study

NASA Technical Reports Server (NTRS)

Keel, Byron M.; Stancil, Charles E.; Eckert, Clifford A.; Brown, Susan M.; Gimmestad, Gary G.; Richards, Mark A.; Schaffner, Philip R. (Technical Monitor)

2000-01-01

The Aviation Safety Program (AvSP) has as its goal an improvement in aviation safety by a factor of 5 over the next 10 years and a factor of 10 over the next 20 years. Since weather has a big impact on aviation safety and is associated with 30% of all aviation accidents, Weather Accident Prevention (WxAP) is a major element under this program. The Aviation Weather Information (AWIN) Distribution and Presentation project is one of three projects under this element. This report contains the findings of a study conducted by the Georgia Tech Research Institute (GTRI) under the Enhanced Weather Products effort, which is a task under AWIN. The study examines current aviation weather products and there application. The study goes on to identify deficiencies in the current system and to define requirements for aviation weather products that would lead to an increase in safety. The study also provides an overview the current set of sensors applied to the collection of aviation weather information. New, modified, or fused sensor systems are identified which could be applied in improving the current set of weather products and in addressing the deficiencies defined in the report. In addition, the study addresses and recommends possible sensors for inclusion in an electronic pilot reporting (EPIREP) system.

Actions for productivity improvement in crew training

NASA Technical Reports Server (NTRS)

Miller, G. E.

1985-01-01

Improvement of the productivity of astronaut crew instructors in the Space Shuttle program and beyond is proposed. It is suggested that instructor certification plans should be established to shorten the time required for trainers to develop their skills and improve their ability to convey those skills. Members of the training cadre should be thoroughly cross trained in their task. This provides better understanding of the overall task and greater flexibility in instructor utilization. Improved facility access will give instructors the benefit of practical application experience. Former crews should be integrated into the training of upcoming crews to bridge some of the gap between simulated conditions and the real world. The information contained in lengthy and complex training manuals can be presented more clearly and efficiently as computer lessons. The illustration, animation and interactive capabilities of the computer combine an effective means of explanation.

NASA's Impacts Towards Improving International Water Management Using Satellites

NASA Astrophysics Data System (ADS)

Toll, D. L.; Doorn, B.; Searby, N. D.; Entin, J. K.; Lawford, R. G.; Mohr, K. I.; Lee, C. M.

2013-12-01

Key objectives of the NASA's Water Resources and Capacity Building Programs are to discover and demonstrate innovative uses and practical benefits of NASA's advanced system technologies for improved water management. This presentation will emphasize NASA's water research, applications, and capacity building activities using satellites and models to contribute to water issues including water availability, transboundary water, flooding and droughts to international partners, particularly developing countries. NASA's free and open exchange of Earth data observations and products helps engage and improve integrated observation networks and enables national and multi-national regional water cycle research and applications that are especially useful in data sparse regions of most developing countries. NASA satellite and modeling products provide a huge volume of valuable data extending back over 50 years across a broad range of spatial (local to global) and temporal (hourly to decadal) scales and include many products that are available in near real time (see earthdata.nasa.gov). To further accomplish these objectives NASA works to actively partner with public and private groups (e.g. federal agencies, universities, NGO's, and industry) in the U.S. and internationally to ensure the broadest use of its satellites and related information and products and to collaborate with regional end users who know the regions and their needs best. The event will help demonstrate the strong partnering and the use of satellite data to provide synoptic and repetitive spatial coverage helping water managers' deal with complex issues. This presentation will outline and describe NASA's international water related research, applications and capacity building programs' efforts to address developing countries critical water challenges in Asia, African and Latin America. This will specifically highlight impacts and case studies from NASA's programs in Water Resources (e.g., drought, snow-pack and agriculture projects), Capacity Building (e.g., 'SERVIR' science visualizations and environmental monitoring), and Terrestrial Hydrology (e.g., land-atmosphere feedbacks and improved stream flow estimation). The presentation will also demonstrate how NASA is a major contributor to water tasks and activities in GEOSS (Global Earth Observing System of Systems) and GEO (Group on Earth Observations).

Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.; Loomis, H.

2014-09-01

The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three cold climate production builders in three U.S. cities and worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Also, BSC provided support through performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive ormore » performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; and increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense® Efficient Hot Water Distribution requirement.« less

Recent Enhancements in NOAA's JPSS Land Product Suite and Key Operational Applications

NASA Astrophysics Data System (ADS)

Csiszar, I. A.; Yu, Y.; Zhan, X.; Vargas, M.; Ek, M. B.; Zheng, W.; Wu, Y.; Smirnova, T. G.; Benjamin, S.; Ahmadov, R.; James, E.; Grell, G. A.

2017-12-01

A suite of operational land products has been produced as part of NOAA's Joint Polar Satellite System (JPSS) program to support a wide range of operational applications in environmental monitoring, prediction, disaster management and mitigation, and decision support. The Visible Infrared Imaging Radiometer Suite (VIIRS) on the Suomi National Polar-orbiting Partnership (NPP) and the operational JPSS satellite series forms the basis of six fundamental and multiple additional added-value environmental data records (EDRs). A major recent improvement in the land-based VIIRS EDRs has been the development of global gridded products, providing a format and science content suitable for ingest into NOAA's operational land surface and coupled numerical weather prediction models. VIIRS near-real-time Green Vegetation Fraction is now in the process of testing for full operational use, while land surface temperature and albedo are under testing and evaluation. The operational 750m VIIRS active fire product, including fire radiative power, is used to support emission modeling and air quality applications. Testing the evaluation for operational NOAA implementation of the improved 375m VIIRS active fire product is also underway. Added-value and emerging VIIRS land products include vegetation health, phenology, near-real-time surface type and surface condition change, and other biogeophysical variables. As part of the JPSS program, a global soil moisture data product has also been generated from the Advanced Microwave Scanning Radiometer 2 (AMSR2) sensor on the GCOM-W1 (Global Change Observation Mission - Water 1) satellite since July 2012. This product is included in the blended NESDIS Soil Moisture Operational Products System, providing soil moisture data as a critical input for land surface modeling.

Implementation of a Thermodynamic Solver within a Computer Program for Calculating Fission-Product Release Fractions

NASA Astrophysics Data System (ADS)

Barber, Duncan Henry

During some postulated accidents at nuclear power stations, fuel cooling may be impaired. In such cases, the fuel heats up and the subsequent increased fission-gas release from the fuel to the gap may result in fuel sheath failure. After fuel sheath failure, the barrier between the coolant and the fuel pellets is lost or impaired, gases and vapours from the fuel-to-sheath gap and other open voids in the fuel pellets can be vented. Gases and steam from the coolant can enter the broken fuel sheath and interact with the fuel pellet surfaces and the fission-product inclusion on the fuel surface (including material at the surface of the fuel matrix). The chemistry of this interaction is an important mechanism to model in order to assess fission-product releases from fuel. Starting in 1995, the computer program SOURCE 2.0 was developed by the Canadian nuclear industry to model fission-product release from fuel during such accidents. SOURCE 2.0 has employed an early thermochemical model of irradiated uranium dioxide fuel developed at the Royal Military College of Canada. To overcome the limitations of computers of that time, the implementation of the RMC model employed lookup tables to pre-calculated equilibrium conditions. In the intervening years, the RMC model has been improved, the power of computers has increased significantly, and thermodynamic subroutine libraries have become available. This thesis is the result of extensive work based on these three factors. A prototype computer program (referred to as SC11) has been developed that uses a thermodynamic subroutine library to calculate thermodynamic equilibria using Gibbs energy minimization. The Gibbs energy minimization requires the system temperature (T) and pressure (P), and the inventory of chemical elements (n) in the system. In order to calculate the inventory of chemical elements in the fuel, the list of nuclides and nuclear isomers modelled in SC11 had to be expanded from the list used by SOURCE 2.0. A benchmark calculation demonstrates the improvement in agreement of the total inventory of those chemical elements included in the RMC fuel model to an ORIGEN-S calculation. ORIGEN-S is the Oak Ridge isotope generation and depletion computer program. The Gibbs energy minimizer requires a chemical database containing coefficients from which the Gibbs energy of pure compounds, gas and liquid mixtures, and solid solutions can be calculated. The RMC model of irradiated uranium dioxide fuel has been converted into the required format. The Gibbs energy minimizer has been incorporated into a new model of fission-product vaporization from the fuel surface. Calculated release fractions using the new code have been compared to results calculated with SOURCE IST 2.0P11 and to results of tests used in the validation of SOURCE 2.0. The new code shows improvements in agreement with experimental releases for a number of nuclides. Of particular significance is the better agreement between experimental and calculated release fractions for 140La. The improved agreement reflects the inclusion in the RMC model of the solubility of lanthanum (III) oxide (La2O3) in the fuel matrix. Calculated lanthanide release fractions from earlier computer programs were a challenge to environmental qualification analysis of equipment for some accident scenarios. The new prototype computer program would alleviate this concern. Keywords: Nuclear Engineering; Material Science; Thermodynamics; Radioactive Material, Gibbs Energy Minimization, Actinide Generation and Depletion, FissionProduct Generation and Depletion.

Design for improved maintenance of the fiber-optic cable system (As carried out in a concurrent engineering environment)

NASA Astrophysics Data System (ADS)

Tremoulet, P. C.

The author describes a number of maintenance improvements in the Fiber Optic Cable System (FOCS). They were achieved during a production phase pilot concurrent engineering program. Listed in order of importance (saved maintenance time and material) by maintenance level, they are: (1) organizational level: improved fiber optic converter (FOC) BITE; (2) Intermediate level: reduced FOC adjustments from 20 to 2; partitioned FOC into electrical and optical parts; developed cost-effective fault isolation test points and test using standard test equipment; improved FOC chassis to have lower mean time to repair; and (3) depot level: revised test requirements documents (TRDs) for common automatic test equipment and incorporated ATE testability into circuit and assemblies and application-specific integrated circuits. These improvements met this contract's tailored logistics MIL-STD 1388-1A requirements of monitoring the design for supportability and determining the most effective support equipment. Important logistics lessons learned while accomplishing these maintainability and supportability improvements on the pilot concurrent engineering program are also discussed.

Partnerships Take a New Turn.

ERIC Educational Resources Information Center

Rich, Don

1983-01-01

Milwaukee Area Technical College has joined with business and industry to develop training programs for computer-based information processing, and engineering and manufacturing technologies. These partnerships are important as companies look for ways to improve productivity and quality, keep abreast of changing technology, and ensure economic…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT--BAGHOUSE FILTRATION PRODUCTS, DONALDSON COMPANY, INC., 6282 FILTRATION MEDIA

EPA Science Inventory

The Environmental Technology Verification (ETV) Program, established by the U.S. EPA, is designed to accelerate the developmentand commercialization of new or improved technologies through third-party verification and reporting of performance. The Air Pollution Control Technology...

Environmental Technology Verification: Baghouse Filtration Products--Donaldson Co., Inc., Tetratec #6255-3 Filtration Media

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. ETV seeks to ach...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS--DONALDSON COMPANY, INC. 6277 FILTRATION MEDIA

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through high quality, peer reviewed data on technology performance to those involved in the des...

Environmental Technology Verification Report -- Baghouse filtration products, GE Energy QG061 filtration media ( tested May 2007)

EPA Science Inventory

EPA has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The Air Pollution Control Technology Verification Center, a cente...

Benefit-cost assessment of a maintenance decision support system (MDSS) implementation : the city and county of Denver.

DOT National Transportation Integrated Search

2009-12-07

The Federal Highway Administration, U.S. Department of Transportation, has established a Road Weather Management Program (RWMP) that seeks to improve the safety, mobility and productivity of the nations surface transportation modes by integrating ...

A Cross-Disciplinary Partnership to Improve Manufacturing Education.

ERIC Educational Resources Information Center

Stephens, Matthew P.; Kraebber, Henry W.

1998-01-01

An exemplary university/business partnership involved the development of a training program to enhance workplace productivity for a relatively small manufacturing facility. The objectives were to educate the work force in the principles of workplace organization and lean manufacturing practices. (Author/JOW)

Preventative Maintenance.

ERIC Educational Resources Information Center

Migliorino, James

Boards of education must be convinced that spending money up front for preventive maintenance will, in the long run, save districts' tax dollars. A good program of preventive maintenance can minimize disruption of service; reduce repair costs, energy consumption, and overtime; improve labor productivity and system equipment reliability; handle…

7 CFR 1212.60 - Programs, plans and projects.

Code of Federal Regulations, 2010 CFR

2010-01-01

... encourage, expand or improve the quality, marketing, and utilization of honey and honey products; (3) Conducting activities that may lead to developing new markets or marketing strategies for honey and honey... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING...

AEROSPACE NESHAP GUIDANCE: PAINTING AND DEPAINTING ALTERNATIVES FOR SELECTED DOD OPERATIONS

EPA Science Inventory

This project was sponsored by the DOD's Strategic Environmental Research and Development program (SERDP) and conducted by the EPA's Clean Processes and Products Branch at the NRMRL. In support of SERDP's objective of developing environmental solutions that improve mission readine...

Environmental Technology Verification: Baghouse Filtration Products--TDC Filter Manufacturing, Inc., SB025 Filtration Media

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. ETV seeks to ach...

Pilot testing of SHRP 2 reliability data and analytical products: Minnesota.

DOT National Transportation Integrated Search

2015-01-01

The Minnesota pilot site has undertaken an effort to test data and analytical tools developed through the Strategic Highway Research Program (SHRP) 2 Reliability focus area. The purpose of these tools is to facilitate the improvement of travel time r...

Human Resource Managers Rank Their Pressure Points.

ERIC Educational Resources Information Center

Herring, Jack

1983-01-01

A survey of 700 top-level human resource executives that elicited 309 responses revealed the highest priority ranking of 24 human resource issues to be: productivity improvement, controlling costs of employee benefits, compensation planning and administration, employee communications, upgrading management training development programs,…

Pipeline safety and security : improved workforce planning and communication needed

DOT National Transportation Integrated Search

2002-08-01

Pipelines transport about 65 percent of the crude oil and refined oil products and nearly all of the natural gas in the United States. The Office of Pipeline Safety (OPS), within the Department of Transportation's (DOT) Research and Special Programs ...

Optimization Of Ocean Color Algorithms: Application To Satellite And In Situ Data Merging. Chapter 9

NASA Technical Reports Server (NTRS)

Maritorena, Stephane; Siegel, David A.; Morel, Andre

2003-01-01

The objective of our program is to develop and validate a procedure for ocean color data merging which is one of the major goals of the SIMBIOS project (McClain et al., 1995). The need for a merging capability is dictated by the fact that since the launch of MODIS on the Terra platform and over the next decade, several global ocean color missions from various space agencies are or will be operational simultaneously. The apparent redundancy in simultaneous ocean color missions can actually be exploited to various benefits. The most obvious benefit is improved coverage (Gregg et al., 1998; Gregg & Woodward, 1998). The patchy and uneven daily coverage from any single sensor can be improved by using a combination of sensors. Beside improved coverage of the global ocean the merging of ocean color data should also result in new, improved, more diverse and better data products with lower uncertainties. Ultimately, ocean color data merging should result in the development of a unified, scientific quality, ocean color time series, from SeaWiFS to NPOESS and beyond. Various approaches can be used for ocean color data merging and several have been tested within the frame of the SIMBIOS program (see e.g. Kwiatkowska & Fargion, 2003, Franz et al., 2003). As part of the SIMBIOS Program, we have developed a merging method for ocean color data. Conversely to other methods our approach does not combine end-products like the subsurface chlorophyll concentration (chl) from different sensors to generate a unified product. Instead, our procedure uses the normalized waterleaving radiances (LwN( )) from single or multiple sensors and uses them in the inversion of a semianalytical ocean color model that allows the retrieval of several ocean color variables simultaneously. Beside ensuring simultaneity and consistency of the retrievals (all products are derived from a single algorithm), this model-based approach has various benefits over techniques that blend end-products (e.g. chlorophyll): 1) it works with single or multiple data sources regardless of their specific bands, 2) it exploits band redundancies and band differences, 3) it accounts for uncertainties in the LwN( ) data and, 4) it provides uncertainty estimates for the retrieved variables.

United States Food and Drug Administration and Department of Defense shelf-life extension program of pharmaceutical products: progress and promise.

PubMed

Khan, Saeed R; Kona, Ravikanth; Faustino, Patrick J; Gupta, Abhay; Taylor, Jeb S; Porter, Donna A; Khan, Mansoor

2014-05-01

The Department of Defense (DoD)-United States Food and Drug Administration (FDA) shelf-life extension program (SLEP) was established in 1986 through an intra-agency agreement between the DoD and the FDA to extend the shelf life of product nearing expiry. During the early stages of development, special attention was paid to program operation, labeling requirements, and the cost benefits associated with this program. In addition to the substantial cost benefits, the program also provides the FDA's Center for Drug Evaluation and Research with significant scientific understanding and pharmaceutical resource. As a result of this unique resource, numerous regulatory research opportunities to improve public health present themselves from this distinctive scientific database, which includes examples of products shelf life, their long-term stability issues, and various physical and chemical tests to identify such failures. The database also serves as a scientific resource for mechanistic understanding and identification of test failures leading to the development of new formulations or more robust packaging. It has been recognized that SLEP is very important in maintaining both national security and public welfare by confirming that the stockpiled pharmaceutical products meet quality standards after the "expiration date" assigned by the sponsor. SLEP research is an example of regulatory science that is needed to best ensure product performance past the original shelf life. The objective of this article is to provide a brief history and background and most importantly the public health benefits of the SLEP. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Symposium: Animal welfare challenges for today and tomorrow.

PubMed

Vizzier Thaxton, Yvonne; Christensen, Karen D; Mench, Joy A; Rumley, Elizabeth R; Daugherty, Christine; Feinberg, Bruce; Parker, Molly; Siegel, Paul; Scanes, Colin G

2016-09-01

The increasing separation of the public from production agriculture means there is often a lack of knowledge among consumers about current production practices and a perception that increased productivity and economic efficiency are necessarily associated with a decline in animal welfare. A symposium was organized to present information about animal welfare issues and the challenges they pose for both scientists and the poultry and allied industries. Companion papers provide information about understanding public attitudes and physiological/immunological approaches to welfare assessment, while this paper outlines current and future challenges to egg and meat production and industry responses to those challenges. For broiler chickens, increases in growth rate result in corollary increases in metabolic heat generation and water consumption, leading to the need for continuing improvements in housing, ventilation, and litter management. Stocking densities, lighting programs, muscle myopathies, and use of antibiotics are also areas that require research attention. In the layer industry, the key challenge is housing, with the industry undergoing a shift from conventional cage housing to alternatives like enriched colonies or cage-free. While these alternative systems have hen welfare advantages, there are also welfare disadvantages that require the development of mitigation strategies, and it is also essential to address associated issues including economic, environmental, egg safety, and worker health impacts. Concerns on the horizon include euthanasia of surplus male chicks and spent hens as well as beak-trimming. The humaneness of slaughter methods is an important welfare and consumer confidence issue, and the current regulations for poultry slaughter in the USA are discussed and compared to those for livestock. The poultry and allied industries, including retailers, are responding to these concerns by consulting with experts, developing science-based animal care standards and auditing programs, strengthening training and oversight programs, promoting research, and improving communication channels. In future, intensifying multi-disciplinary research efforts and developing mechanisms to improve communication between scientists and stakeholders, including the public, will be critical to addressing these issues. © 2016 Poultry Science Association Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar-Lezama, Armando

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.