Diurnal and seasonal variations of carbonyls and their effect on ozone concentrations in the atmosphere of Monterrey, Mexico.

PubMed

Menchaca-Torre, H Lizette; Mercado-Hernández, Roberto; Rodríguez-Rodríguez, José; Mendoza-Domínguez, Alberto

2015-04-01

Few studies have been made regarding carbonyl concentrations in Monterrey, México. The Monterrey Metropolitan Area (MMA) has the third largest population in the country and has increasing pollution issues. The concentrations of 10 aldehydes and two ketones were measured in the MMA, in the spring and fall of 2011 and 2012. Formaldehyde (16-42 ppbv) was the most abundant carbonyl, followed by acetaldehyde (5-15 ppbv) and acetone (7-15 ppbv). The concentrations showed marked diurnal trends with maximum values between 10:00 a.m. and 2:00 p.m., when photochemical activity is intense. Thus, secondary production of carbonyls is statistically significant in the city. Biogenic production of several carbonyls, such as 2-butanone, was supported by their mid correlation with solar radiation and low correlation with propionaldehyde, which is mainly emitted by anthropogenic sources. The seasonal variability of the concentrations was observed in the first three samplings, with the highest levels reached in the fall. The rainy conditions during the fourth sampling did not allow comparison. Carbonyl-NOx-O3 analysis was made. Results indicated a carbonyl-sensitive atmosphere, especially during the midday samplings of 10:00 a. m. to 2:00 p.m. and 2:00 p.m. and 6:00 p.m. because of the intense solar radiation during these periods. Monitoring of carbonyls in Monterrey, Mexico, was performed to quantify the pollutant concentration in the city's atmosphere. Although primary emission is significantly important, the secondary production of the pollutants, along with ozone production being carbonyl sensitive, indicates that air pollution controls must address the direct sources and the precursors of the pollutants to achieve air quality.

Adverse analytical findings with clenbuterol among U-17 soccer players attributed to food contamination issues.

PubMed

Thevis, Mario; Geyer, Lina; Geyer, Hans; Guddat, Sven; Dvorak, Jiri; Butch, Anthony; Sterk, Saskia S; Schänzer, Wilhelm

2013-05-01

The illicit use of growth promoters in animal husbandry has frequently been reported in the past. Among the drugs misused to illegally increase the benefit of stock farming, clenbuterol has held a unique position due to the substance's composition, mechanism of action, metabolism, and disposition. Particularly clenbuterol's disposition in animals' edible tissues destined for food production can cause considerable issues on consumption by elite athletes registered in national and international doping control systems as demonstrated in this case-related study. Triggered by five adverse analytical findings with clenbuterol among the Mexican national soccer team in out-of-competition controls in May 2011, the Fédération Internationale de Football Association (FIFA) initiated an inquest into a potential food contamination (and thus sports drug testing) problem in Mexico, the host country of the FIFA U-17 World Cup 2011. Besides 208 regular doping control samples, which were subjected to highly sensitive mass spectrometric test methods for anabolic agents, 47 meat samples were collected in team hotels during the period of the tournament and forwarded to Institute of Food Safety, RIKILT. In 14 out of 47 meat samples (30%), clenbuterol was detected at concentrations between 0.06 and 11 µg/kg. A total of 109 urine samples out of 208 doping control specimens (52%) yielded clenbuterol findings at concentrations ranging from 1-1556 pg/ml, and only 5 out of 24 teams provided urine samples that did not contain clenbuterol. At least one of these teams was on a strict 'no-meat' diet reportedly due to the known issue of clenbuterol contamination in Mexico. Eventually, owing to the extensive evidence indicating meat contamination as the most plausible reason for the extraordinary high prevalence of clenbuterol findings, none of the soccer players were sanctioned. However, elite athletes have to face severe consequences when testing positive for a prohibited anabolic agent and sufficient supporting information corroborating the scenario of inadvertent ingestion are required to be acquitted from anti-doping rule violations. Hence, governmental contribution is urgently needed to combat the illegal use of clenbuterol in stock breading. Copyright © 2013 John Wiley & Sons, Ltd.

The economic impact of poor sample quality in clinical chemistry laboratories: results from a global survey.

PubMed

Erdal, Erik P; Mitra, Debanjali; Khangulov, Victor S; Church, Stephen; Plokhoy, Elizabeth

2017-03-01

Background Despite advances in clinical chemistry testing, poor blood sample quality continues to impact laboratory operations and the quality of results. While previous studies have identified the preanalytical causes of lower sample quality, few studies have examined the economic impact of poor sample quality on the laboratory. Specifically, the costs associated with workarounds related to fibrin and gel contaminants remain largely unexplored. Methods A quantitative survey of clinical chemistry laboratory stakeholders across 10 international regions, including countries in North America, Europe and Oceania, was conducted to examine current blood sample testing practices, sample quality issues and practices to remediate poor sample quality. Survey data were used to estimate costs incurred by laboratories to mitigate sample quality issues. Results Responses from 164 participants were included in the analysis, which was focused on three specific issues: fibrin strands, fibrin masses and gel globules. Fibrin strands were the most commonly reported issue, with an overall incidence rate of ∼3%. Further, 65% of respondents indicated that these issues contribute to analyzer probe clogging, and the majority of laboratories had visual inspection and manual remediation practices in place to address fibrin- and gel-related quality problems (55% and 70%, respectively). Probe maintenance/replacement, visual inspection and manual remediation were estimated to carry significant costs for the laboratories surveyed. Annual cost associated with lower sample quality and remediation related to fibrin and/or gel globules for an average US laboratory was estimated to be $100,247. Conclusions Measures to improve blood sample quality present an important step towards improved laboratory operations.

Reducing the Impact of Sampling Bias in NASA MODIS and VIIRS Level 3 Satellite Derived IR SST Observations over the Arctic

NASA Astrophysics Data System (ADS)

Minnett, P. J.; Liu, Y.; Kilpatrick, K. A.

2016-12-01

Sea-surface temperature (SST) measurements by satellites in the northern hemisphere high latitudes confront several difficulties. Year-round prevalent clouds, effects near ice edges, and the relative small difference between SST and low-level cloud temperatures lead to a significant loss of infrared observations regardless of the more frequent polar satellite overpasses. Recent research (Liu and Minnett, 2016) identified sampling issues in the Level 3 NASA MODIS SST products when 4km observations are aggregated into global grids at different time and space scales, particularly in the Arctic, where a binary decision cloud mask designed for global data is often overly conservative at high latitudes and results in many gaps and missing data. This under sampling of some Arctic regions results in a warm bias in Level 3 products, likely a result of warmer surface temperature, more distant from the ice edge, being identified more frequently as cloud free. Here we present an improved method for cloud detection in the Arctic using a majority vote from an ensemble of four classifiers trained based on an Alternative Decision Tree (ADT) algorithm (Freund and Mason 1999, Pfahringer et. al. 2001). This new cloud classifier increases sampling of clear pixel by 50% in several regions and generally produces cooler monthly average SST fields in the ice-free Arctic, while still retaining the same error characteristics at 1km resolution relative to in situ observations. SST time series of 12 years of MODIS (Aqua and Terra) and more recently VIIRS sensors are compared and the improvements in errors and uncertainties resulting from better cloud screening for Level 3 gridded products are assessed and summarized.

On Statistical Approaches for Demonstrating Analytical Similarity in the Presence of Correlation.

PubMed

Yang, Harry; Novick, Steven; Burdick, Richard K

Analytical similarity is the foundation for demonstration of biosimilarity between a proposed product and a reference product. For this assessment, currently the U.S. Food and Drug Administration (FDA) recommends a tiered system in which quality attributes are categorized into three tiers commensurate with their risk and approaches of varying statistical rigor are subsequently used for the three-tier quality attributes. Key to the analyses of Tiers 1 and 2 quality attributes is the establishment of equivalence acceptance criterion and quality range. For particular licensure applications, the FDA has provided advice on statistical methods for demonstration of analytical similarity. For example, for Tier 1 assessment, an equivalence test can be used based on an equivalence margin of 1.5 σ R , where σ R is the reference product variability estimated by the sample standard deviation S R from a sample of reference lots. The quality range for demonstrating Tier 2 analytical similarity is of the form X̄ R ± K × σ R where the constant K is appropriately justified. To demonstrate Tier 2 analytical similarity, a large percentage (e.g., 90%) of test product must fall in the quality range. In this paper, through both theoretical derivations and simulations, we show that when the reference drug product lots are correlated, the sample standard deviation S R underestimates the true reference product variability σ R As a result, substituting S R for σ R in the Tier 1 equivalence acceptance criterion and the Tier 2 quality range inappropriately reduces the statistical power and the ability to declare analytical similarity. Also explored is the impact of correlation among drug product lots on Type I error rate and power. Three methods based on generalized pivotal quantities are introduced, and their performance is compared against a two-one-sided tests (TOST) approach. Finally, strategies to mitigate risk of correlation among the reference products lots are discussed. A biosimilar is a generic version of the original biological drug product. A key component of a biosimilar development is the demonstration of analytical similarity between the biosimilar and the reference product. Such demonstration relies on application of statistical methods to establish a similarity margin and appropriate test for equivalence between the two products. This paper discusses statistical issues with demonstration of analytical similarity and provides alternate approaches to potentially mitigate these problems. © PDA, Inc. 2016.

Suitability of spring wheat varieties for the production of best quality pizza.

PubMed

Tehseen, Saima; Anjum, Faqir Muhammad; Pasha, Imran; Khan, Muhammad Issa; Saeed, Farhan

2014-08-01

The selection of appropriate wheat cultivars is an imperative issue in product development and realization. The nutritional profiling of plants and their cultivars along with their suitability for development of specific products is of considerable interests for multi-national food chains. In this project, Pizza-Hut Pakistan provided funds for the selection of suitable newly developed Pakistani spring variety for pizza production. In this regard, the recent varieties were selected and evaluated for nutritional and functional properties for pizza production. Additionally, emphasis has been paid to assess all varieties for their physico-chemical attributes, rheological parameters and mineral content. Furthermore, pizza prepared from respective flour samples were further evaluated for sensory attributes Results showed that Anmool, Abadgar, Imdad, SKD-1, Shafaq and Moomal have higher values for protein, gluten content, pelshenke value and SDS sedimentation and these were relatively better in studied parameters as compared to other varieties although which were considered best for good quality pizza production. TD-1 got significantly highest score for flavor of pizza and lowest score was observed from wheat variety Kiran. Moreover, it is concluded from current study that all wheat varieties except TJ-83 and Kiran exhibited better results for flavor.

Class-modelling in food analytical chemistry: Development, sampling, optimisation and validation issues - A tutorial.

PubMed

Oliveri, Paolo

2017-08-22

Qualitative data modelling is a fundamental branch of pattern recognition, with many applications in analytical chemistry, and embraces two main families: discriminant and class-modelling methods. The first strategy is appropriate when at least two classes are meaningfully defined in the problem under study, while the second strategy is the right choice when the focus is on a single class. For this reason, class-modelling methods are also referred to as one-class classifiers. Although, in the food analytical field, most of the issues would be properly addressed by class-modelling strategies, the use of such techniques is rather limited and, in many cases, discriminant methods are forcedly used for one-class problems, introducing a bias in the outcomes. Key aspects related to the development, optimisation and validation of suitable class models for the characterisation of food products are critically analysed and discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

9 CFR 102.1 - Licenses issued by the Administrator.

Code of Federal Regulations, 2011 CFR

2011-01-01

... biological products under the Virus-Serum-Toxin Act shall hold an unexpired and unrevoked U.S. Veterinary Biologics Establishment License issued by the Administrator and a U.S. Veterinary Biological Product License...

9 CFR 102.1 - Licenses issued by the Administrator.

Code of Federal Regulations, 2010 CFR

2010-01-01

... biological products under the Virus-Serum-Toxin Act shall hold an unexpired and unrevoked U.S. Veterinary Biologics Establishment License issued by the Administrator and a U.S. Veterinary Biological Product License...

Developing Sampling Frame for Case Study: Challenges and Conditions

ERIC Educational Resources Information Center

Ishak, Noriah Mohd; Abu Bakar, Abu Yazid

2014-01-01

Due to statistical analysis, the issue of random sampling is pertinent to any quantitative study. Unlike quantitative study, the elimination of inferential statistical analysis, allows qualitative researchers to be more creative in dealing with sampling issue. Since results from qualitative study cannot be generalized to the bigger population,…

Challenging Conventional Wisdom for Multivariate Statistical Models with Small Samples

ERIC Educational Resources Information Center

McNeish, Daniel

2017-01-01

In education research, small samples are common because of financial limitations, logistical challenges, or exploratory studies. With small samples, statistical principles on which researchers rely do not hold, leading to trust issues with model estimates and possible replication issues when scaling up. Researchers are generally aware of such…

Consumers' attitudes towards GM Free products in a European Region. The case of the Prefecture of Drama-Kavala-Xanthi in Greece.

PubMed

Tsourgiannis, L; Karasavvoglou, A; Florou, G

2011-10-01

This study aims to identify the factors that affect consumers purchasing behaviour towards food products that are free from Genetic Modified Organism (GM Free) in a European Region and more precisely in the Prefecture of Drama-Kavala-Xanthi. Field interviews conducted in a random selected sample consisted of 337 consumers in the cities of Drama, Kavala, Xanthi, in November and December of 2009. Principal components analysis (PCA) was conducted in order to identify the factors that affect people in preferring consuming products that are GM Free. The factors that influence people in the study area to buy GM Free products are: (a) products' certification as GM Free or organic products, (b) interest about the protection of the environment and nutrition value, (c) marketing issues, and (d) price and quality. Furthermore, cluster and discriminant analysis identified two groups of consumers: (a) those are influenced by the product price, quality and marketing aspects and (b) those are interested in product's certification and environmental protection. Non parametric statistical bivariate techniques were performed to profile the identified groups of consumers regarding their personal characteristics and some other factors affecting their buying behaviour. Copyright © 2011. Published by Elsevier Ltd.

MICROBIOLOGICAL QUALITY OF FOOD SUPPLEMENTS.

PubMed

Ratajczak, Magdalena; Kubicka, Marcelina M; Kamińska, Dorota; Długaszewska, Jolanta

2015-01-01

Many specialists note that the food offered today - as a result of very complex technological processing - is devoid of many components that are important for the organism and the shortages have to be supplemented. The simplest for it is to consume diet supplements that provide the missing element in a concentrated form. In accordance with the applicable law, medicinal products include all substances or mixtures of substances that are attributed with properties of preventing or treating diseases with humans or animals. Permits to admit supplements to the market are issued by the Chief Sanitary Inspector and the related authorities; permits for medicines are issued by the Chief Pharmaceutical Inspector and the Office for Registration of Medicinal Products, Medical Devices and Biocidal Products. Therefore, admittance of a supplement to the market is less costly and time consuming_than admittance of a medicine. Supplements and medicines may contain the same component but medicines will have a larger concentration than supplements. Sale of supplements at drug stores and in the form of tablets, capsules, liquids or powders makes consumer often confusing supplements with medicines. Now there are no normative documents specifying limits of microbiological impurities in diet supplements. In Polish legislation, diet supplements are subject to legal acts concerning food. Medicines have to comply with microbiological purity requirements specified in the Polish Pharmacopeia. As evidenced with the completed tests, the proportion of diet supplement samples with microbiological impurities is 6.5%. Sales of diet supplements have been growing each year, they are consumed by healthy people but also people with immunology deficiencies and by children and therefore consumers must be certain that they buy safe products.

Design and Implementation of a C++ Software Package to scan for and parse Tsunami Messages issued by the Tsunami Warning Centers for Operational use at the Pacific Tsunami Warning Center

NASA Astrophysics Data System (ADS)

Sardina, V.

2012-12-01

The US Tsunami Warning Centers (TWCs) have traditionally generated their tsunami message products primarily as blocks of text then tagged with headers that identify them on each particular communications' (comms) circuit. Each warning center has a primary area of responsibility (AOR) within which it has an authoritative role regarding parameters such as earthquake location and magnitude. This means that when a major tsunamigenic event occurs the other warning centers need to quickly access the earthquake parameters issued by the authoritative warning center before issuing their message products intended for customers in their own AOR. Thus, within the operational context of the TWCs the scientists on duty have an operational need to access the information contained in the message products issued by other warning centers as quickly as possible. As a solution to this operational problem we designed and implemented a C++ software package that allows scanning for and parsing the entire suite of tsunami message products issued by the Pacific Tsunami Warning Center (PTWC), the West Coast and Alaska Tsunami Warning Center (WCATWC), and the Japan Meteorological Agency (JMA). The scanning and parsing classes composing the resulting C++ software package allow parsing both non-official message products(observatory messages) routinely issued by the TWCs, and all official tsunami message products such as tsunami advisories, watches, and warnings. This software package currently allows scientists on duty at the PTWC to automatically retrieve the parameters contained in tsunami messages issued by WCATWC, JMA, or PTWC itself. Extension of the capabilities of the classes composing the software package would make it possible to generate XML and CAP compliant versions of the TWCs' message products until new messaging software natively adds this capabilities. Customers who receive the TWCs' tsunami message products could also use the package to automatically retrieve information from messages sent via any text-based communications' circuit currently used by the TWCs to disseminate their tsunami message products.

Mathematical modeling of a multi-product EMQ model with an enhanced end items issuing policy and failures in rework.

PubMed

Chiu, Yuan-Shyi Peter; Sung, Peng-Cheng; Chiu, Singa Wang; Chou, Chung-Li

2015-01-01

This study uses mathematical modeling to examine a multi-product economic manufacturing quantity (EMQ) model with an enhanced end items issuing policy and rework failures. We assume that a multi-product EMQ model randomly generates nonconforming items. All of the defective are reworked, but a certain portion fails and becomes scraps. When rework process ends and the entire lot of each product is quality assured, a cost reduction n + 1 end items issuing policy is used to transport finished items of each product. As a result, a closed-form optimal production cycle time is obtained. A numerical example demonstrates the practical usage of our result and confirms a significant savings in stock holding and overall production costs as compared to that of a prior work (Chiu et al. in J Sci Ind Res India, 72:435-440 2013) in the literature.

Forest products issue.

Treesearch

Thornton T. Munger

1935-01-01

This issue of Forest Research Notes is devoted to abstracts of projects under way or recently completed by the Section of Forest Products. This section conducts research designed to contribute to better and more economic utilization of the products of the forest. As shown by the variety of subjects presented in these notes, the projects range from the statistics of...

The Musical in the High School.

ERIC Educational Resources Information Center

Grote, David G., Ed.

1981-01-01

This special journal issue examines the place of the musical production in secondary school theatre activities. Articles in the issue discuss (1) the value of a musical production to students and the school drama program, (2) mature directing of a musical production, (3) the use of "off-Broadway" musicals in the high school, (4) the advantages of…

76 FR 35619 - Labeling and Effectiveness Testing; Sunscreen Drug Products for Over-the-Counter Human Use

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

...The Food and Drug Administration (FDA) is issuing this document to address labeling and effectiveness testing for certain over-the counter (OTC) sunscreen products containing specified active ingredients and marketed without approved applications. This document addresses labeling and effectiveness testing issues raised by the nearly 2,900 submissions that we received in response to the sunscreen proposed rule of August 27, 2007 (2007 proposed rule). The document also identifies specific claims that render a product that is subject to this rule misbranded or would not be allowed on any OTC sunscreen product marketed without an approved application. The document does not address issues related to sunscreen active ingredients or certain other issues regarding the GRASE determination for sunscreen products. The document requires OTC sunscreen products to comply with the content and format requirements for OTC drug labeling contained in the 1999 Drug Facts final rule (published in the Federal Register of March 17, 1999, by lifting the delay of implementation date for that rule that we published on September 3, 2004).

Fast, comprehensive two-dimensional liquid chromatography

PubMed Central

Stoll, Dwight R.; Li, Xiaoping; Wang, Xiaoli; Carr, Peter W.; Porter, Sarah E. G.; Rutan, Sarah C.

2011-01-01

The absolute need to improve the separating power of liquid chromatography, especially for multi-constituent biological samples, is becoming increasingly evident. In response, over the past few years, there has been a great deal of interest in the development of two dimension liquid chromatography (2DLC). Just as 1DLC is preferred to 1DGC based on its compatibility with biological materials we believe that ultimately 2DLC will be preferred to the much more highly developed 2DGC for such samples. The huge advantage of 2D chromatographic techniques over 1D methods is inherent in the tremendous potential increase in peak capacity (resolving power). This is especially true of comprehensive 2D chromatography wherein it is possible, under ideal conditions, to obtain a total peak capacity equal to the product of the peak capacities of the first and second dimension separations. However, the very long timescale (typically several hours to tens of hours) of comprehensive 2DLC is clearly its chief drawback. Recent advances in the use of higher temperatures to speed up isocratic and gradient elution liquid chromatography have been used to decrease the time needed to do the second dimension LC separation of 2DLC to about 20 seconds for a full gradient elution run. Thus fast, high temperature LC is becoming a very promising technique. Peak capacities of over 2000 and rates of peak capacity production of nearly 1 peak/s have been achieved. In consequence, many real samples showing more than 200 peaks with signal to noise ratios of better than 10:1 have been run in total times of under 30 minutes. This report is not intended to be a comprehensive review of 2DLC, but is deliberately focused on the issues involved in doing fast 2DLC by means of elevating the column temperature; however, many issues of broader applicability will be discussed. PMID:17888443

Social inclusion of the people with mental health issues: Compare international results.

PubMed

Santos, Jussara Carvalho Dos; Barros, Sônia; Huxley, Peter John

2018-06-01

Social inclusion of people with mental health issues is an aim of the World Health Organisation. Many countries have adopted that objective, including Brazil and the United Kingdom and both have focused treatment in the community. The aim of this article is to compare international results using the same inclusion instrument. The samples in this study were 225 people with mental health issues in community services in São Paulo, Brazil. Their results are compared to findings from 168 people with similar mental health issues in Hong Kong, China, and from the United Kingdom - a nationally representative sample of 212 people without mental health issues. The instrument used to measure a social inclusion called Social and Communities Opportunities Profile (SCOPE) has been validated for use in the United Kingdom, China and Brazil. The results are that people with mental health issues have worse social inclusion when compared to general population. Between the people with mental health issues, the sample of São Paulo has the lowest social inclusion index but, in relation to access to the Brazilian revised mental health services, that sample has a similarly high inclusion rating to the general population of the United Kingdom. Findings are important to understand mental health in the community context, as well as their adversities and potentialities.

30 CFR 260.123 - How do I measure natural gas production for a lease issued in a sale held after November 2000?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I measure natural gas production for a... Systems Royalty Suspension (rs) Leases § 260.123 How do I measure natural gas production for a lease issued in a sale held after November 2000? You must measure natural gas production subject to the royalty...

30 CFR 260.123 - How do I measure natural gas production for a lease issued in a sale held after November 2000?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false How do I measure natural gas production for a... measure natural gas production for a lease issued in a sale held after November 2000? You must measure natural gas production subject to the royalty suspension volume for your lease as follows: 5.62 thousand...

Chlorination of bisphenol A: non-targeted screening for the identification of transformation products and assessment of estrogenicity in generated water.

PubMed

Bourgin, Marc; Bichon, Emmanuelle; Antignac, Jean-Philippe; Monteau, Fabrice; Leroy, Gaëla; Barritaud, Lauriane; Chachignon, Mathilde; Ingrand, Valérie; Roche, Pascal; Le Bizec, Bruno

2013-11-01

Besides the performance of water treatments on the removal of micropollutants, concern about the generation of potential biologically active transformation products has been growing. Thus, the detection and structural elucidation of micropollutants transformation products have turned out to be major issues to evaluate comprehensively the efficiency of the processes implemented for drinking water treatment. However, most of existing water treatment studies are carried out at the bench scale with high concentrations and simplified conditions and thus do not reflect realistic conditions. Conversely, this study describes a non-targeted profiling approach borrowed from metabolomic science, using liquid chromatography coupled to high-resolution mass spectrometry, in order to reveal potential chlorination products of bisphenol A (BPA) in real water samples spiked at 50μgL(-1). Targeted measurements first evidenced a fast removal of BPA (>99%) by chlorination with sodium hypochlorite (0.8mgL(-1)) within 10min. Then, the developed differential global profiling approach enabled to reveal 21 chlorination products of BPA. Among them, 17 were brominated compounds, described for the first time, demonstrating the potential interest of this innovative methodology applied to environmental sciences. In parallel to the significant removal of BPA, the estrogenic activity of water samples, evaluated by ER-CALUX assay, was found to significantly decrease after 10min of chlorination. These results confirm that chlorination is effective at removing BPA in drinking water and they may indicate that the generated compounds have significantly lower estrogenic activity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Introduction to Papers from the 5th Workshop on Language Production: The Neural Bases of Language Production

ERIC Educational Resources Information Center

Rapp, Brenda; Miozzo, Michele

2011-01-01

The papers in this special issue of "Language and Cognitive Processing" on the neural bases of language production illustrate two general approaches in current cognitive neuroscience. One approach focuses on investigating cognitive issues, making use of the logic of associations/dissociations or the logic of neural markers as key investigative…

77 FR 45242 - Revisions to Safety Standards for Durable Infant or Toddler Products: Infant Bath Seats and Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... direction in the Danny Keysar Child Product Safety Notification Act to issue standards for durable infant or... not usually subject to CPSC's standards, such as child care facilities, family child care homes, and... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision...

Weighting issues in recreation research and in identifying support for resource conservation management alternatives

Treesearch

Amy L. Sheaffer; Jay Beaman; Joseph T. O' Leary; Rebecca L. Williams; Doran M. Mason

2001-01-01

Sampling for research in recreation settings in an ongoing challenge. Often certain groups of users are more likely to be sampled. It is important in measuring public support for resource conservation and in understanding use of natural resources for recreation to evaluate issues of bias in survey methodologies. Important methodological issues emerged from a statewide...

Mining Health-Related Issues in Consumer Product Reviews by Using Scalable Text Analytics

PubMed Central

Torii, Manabu; Tilak, Sameer S.; Doan, Son; Zisook, Daniel S.; Fan, Jung-wei

2016-01-01

In an era when most of our life activities are digitized and recorded, opportunities abound to gain insights about population health. Online product reviews present a unique data source that is currently underexplored. Health-related information, although scarce, can be systematically mined in online product reviews. Leveraging natural language processing and machine learning tools, we were able to mine 1.3 million grocery product reviews for health-related information. The objectives of the study were as follows: (1) conduct quantitative and qualitative analysis on the types of health issues found in consumer product reviews; (2) develop a machine learning classifier to detect reviews that contain health-related issues; and (3) gain insights about the task characteristics and challenges for text analytics to guide future research. PMID:27375358

Mining Health-Related Issues in Consumer Product Reviews by Using Scalable Text Analytics.

PubMed

Torii, Manabu; Tilak, Sameer S; Doan, Son; Zisook, Daniel S; Fan, Jung-Wei

2016-01-01

In an era when most of our life activities are digitized and recorded, opportunities abound to gain insights about population health. Online product reviews present a unique data source that is currently underexplored. Health-related information, although scarce, can be systematically mined in online product reviews. Leveraging natural language processing and machine learning tools, we were able to mine 1.3 million grocery product reviews for health-related information. The objectives of the study were as follows: (1) conduct quantitative and qualitative analysis on the types of health issues found in consumer product reviews; (2) develop a machine learning classifier to detect reviews that contain health-related issues; and (3) gain insights about the task characteristics and challenges for text analytics to guide future research.

Editorial

NASA Astrophysics Data System (ADS)

Wäppling, Roger

2005-01-01

During a number of years, the production of Physica Scripta has been taken care of by Lindsay Ross International Ltd (now part of Marston Books Ltd). The editorial office of Physica Scripta has worked in close collaboration with the production company and many routines have been developed in joint efforts. The present issue of Physica Scripta is the last produced by LRI/Marston and I would like to take this opportunity to thank all our collaborators at the production company for their contributions to the success of our journal during this extended period of cooperation. For the next issue, i.e. the January 2006 issue, the production has been moved to IOP Press but the transition should be seamless to our contributors.

On-line Monitoring of Continuous Flow Chemical Synthesis Using a Portable, Small Footprint Mass Spectrometer

NASA Astrophysics Data System (ADS)

Bristow, Tony W. T.; Ray, Andrew D.; O'Kearney-McMullan, Anne; Lim, Louise; McCullough, Bryan; Zammataro, Alessio

2014-10-01

For on-line monitoring of chemical reactions (batch or continuous flow), mass spectrometry (MS) can provide data to (1) determine the fate of starting materials and reagents, (2) confirm the presence of the desired product, (3) identify intermediates and impurities, (4) determine steady state conditions and point of completion, and (5) speed up process optimization. Recent developments in small footprint atmospheric pressure ionization portable mass spectrometers further enable this coupling, as the mass spectrometer can be easily positioned with the reaction system to be studied. A major issue for this combination is the transfer of a sample that is representative of the reaction and also compatible with the mass spectrometer. This is particularly challenging as high concentrations of reagents and products can be encountered in organic synthesis. The application of a portable mass spectrometer for on-line characterization of flow chemical synthesis has been evaluated by coupling a Microsaic 4000 MiD to the Future Chemistry Flow Start EVO chemistry system. Specifically, the Hofmann rearrangement has been studied using the on-line mass spectrometry approach. Sample transfer from the flow reactor is achieved using a mass rate attenuator (MRA) and a sampling make-up flow from a high pressure pump. This enables the appropriate sample dilution, transfer, and preparation for electrospray ionization. The capability of this approach to provide process understanding is described using an industrial pharmaceutical process that is currently under development. The effect of a number of key experimental parameters, such as the composition of the sampling make-up flow and the dilution factor on the mass spectrometry data, is also discussed.

Improved Monitoring of Vegetation Productivity using Continuous Assimilation of Radiometric Data

NASA Astrophysics Data System (ADS)

Baret, F.; Lauvernet, C.; Weiss, M.; Prevot, L.; Rochdi, N.

Canopy functioning models describe crop production from meteorological and soil inputs. However, because of the large number of variables and parameters used, and the poor knowledge of the actual values of some of them, the time course of the canopy and thus final production simulated by these models is often not very accurate. Satellite observations sensors allow controlling the simulations through assimilation of the radiometric data within radiative transfer models coupled to canopy functioning models. An assimilation scheme is presented with application to wheat crops. The coupling between radiative transfer models and canopy functioning models is described. The assimilation scheme is then applied to an experiment achieved within the ReSeDA project. Several issues relative to the assimilation process are discussed. They concern the type of canopy functioning model used, the possibility to assimilate biophysical products rather than radiances, and the use of ancillary information. Further, considerations associated to the problems linked to high spatial and temporal resolution data are listed and illustrated by preliminary results acquired within the ADAM project. Further discussion is made on the required temporal sampling for space observations.

Antimicrobials in animal production: usage and practices among livestock farmers in Oyo and Kaduna States of Nigeria.

PubMed

Ojo, Olufemi Ernest; Fabusoro, Eniola; Majasan, Ademola Adetokunbo; Dipeolu, Morenike Atinuke

2016-01-01

Antimicrobials have proven to be important for sustainable livestock production by their use as growth promoters and in the control of animal infections. However, injudicious use of antimicrobials could accelerate the emergence and spread of resistant bacterial strains with attendant socioeconomic and public health issues. This work assessed antimicrobial usage in animal production with emphasis on usage and practices by livestock producers in Oyo and Kaduna States of Nigeria. Data on antimicrobial usage were collected through interviews, questionnaire and focus group discussions. Four hundred and fifty-four farmers in 11 communities within 11 Local Government Areas of Oyo and Kaduna States of Nigeria were sampled in a multi-stage sampling procedure. The study showed that antimicrobial agents were widely distributed, readily accessible and commonly used in animal production. Fluoroquinolones and other critically important antimicrobials for human medicine were widely used in animals as prophylactics. Potentially harmful antimicrobials including furazolidones and chloramphenicol already banned for use in humans and animals were freely marketed and used in livestock production. Most of the respondents believed that veterinarians should be responsible for the administration of antimicrobials to animals, but in practice, they buy and administer antimicrobials without consulting veterinary professionals. It was observed that the ready availability of antimicrobial agents promoted the use of antimicrobials in livestock production and may encourage non-adherence to hygienic principles and management laxity in farm operations. The non-involvement of veterinary professionals and laboratory investigations in disease diagnosis prior to antimicrobial use could lead to improper usage that contribute to the development of antimicrobial resistance in bacterial strains. Responsible antimicrobial stewardship and strict regulations are vital to prolonging the benefits derivable from the use of antimicrobials.

10 CFR 32.25 - Conditions of licenses issued under § 32.22: Quality control, labeling, and reports of transfer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Conditions of licenses issued under § 32.22: Quality... Concentrations and Items § 32.25 Conditions of licenses issued under § 32.22: Quality control, labeling, and... in the manufacture of the product to assure that each production lot meets the quality control...

10 CFR 32.25 - Conditions of licenses issued under § 32.22: Quality control, labeling, and reports of transfer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Conditions of licenses issued under § 32.22: Quality... Concentrations and Items § 32.25 Conditions of licenses issued under § 32.22: Quality control, labeling, and... in the manufacture of the product to assure that each production lot meets the quality control...

Big Data in the Industry - Overview of Selected Issues

NASA Astrophysics Data System (ADS)

Gierej, Sylwia

2017-12-01

This article reviews selected issues related to the use of Big Data in the industry. The aim is to define the potential scope and forms of using large data sets in manufacturing companies. By systematically reviewing scientific and professional literature, selected issues related to the use of mass data analytics in production were analyzed. A definition of Big Data was presented, detailing its main attributes. The importance of mass data processing technology in the development of Industry 4.0 concept has been highlighted. Subsequently, attention was paid to issues such as production process optimization, decision making and mass production individualisation, and indicated the potential for large volumes of data. As a result, conclusions were drawn regarding the potential of using Big Data in the industry.

Using self-report and adverse event measures to track health's impact on productivity in known groups.

PubMed

Allen, Harris M; Bunn, William B

2003-09-01

The use of survey data to measure and monitor health and productivity differences between groups is an issue of increasing importance. This article examines the capacity of productivity self-reports (derived from surveys) and adverse event measures (derived from administrative sources) to differentiate groups with a priori known characteristics. A replication strategy is used to test the contributions that productivity self-reports make, alone as well as above and beyond measures of adverse events, to the discrimination of 5 pairs of groups classified by clinical, job type, and demographic criteria. These tests are conducted on representative samples of the active, largely blue-collar employee population at International Truck and Engine Corporation. The results show that both productivity self-reports and adverse event measures differentiate and track known groups. Even in the presence of highly significant effects from adverse event measures, self-reports improve the assessment of productivity. We conclude that: 1) although the joint use of self-reports and adverse event measures is the better approach, practitioners can use self-reports with the expectation that this method will track group differences in health and productivity when adverse event measures are not available; and 2) survey self-reports make unique and independent contributions when adverse events measures are used.

Amendments to (63)Ni production calculation for Hiroshima by Takamiya et al. and DS02 fluence data by Egbert et al.

PubMed

Takamiya, K; Imanaka, T; Egbert, S D; Rühm, W

2011-05-01

In a previous paper, Takamiya et al. calculated (63)Ni production in copper samples exposed to the Hiroshima atomic bomb. More specifically, they used their experimental cross-section values of the (63)Cu(n,p)(63)Ni reaction and compared the result with that of the corresponding calculation in the radiation dosimetry system DS02, which used another set of cross-section values. These results were different, and the following two reasons were found: typographical errors in several energy boundary values in the DS02 report that was also used in the calculation by Takamiya et al. and an inappropriate assumption on the cross-section values of the low neutron energy region in the calculation by Takamiya et al. These two issues are described and amended in the present report.

An immunomagnetic separation-real-time PCR system for the detection of Alicyclobacillus acidoterrestris in fruit products.

PubMed

Wang, Zhouli; Cai, Rui; Yuan, Yahong; Niu, Chen; Hu, Zhongqiu; Yue, Tianli

2014-04-03

Alicyclobacillus acidoterrestris is the most important spoilage species within the Alicyclobacillus genus and has become a major issue in the pasteurized fruit juice industry. The aim of this study was to develop a method combining immunomagnetic separation (IMS) with real-time PCR system (IMS-PCR) for rapid and specific detection of A. acidoterrestris in fruit products. A real-time PCR with the TaqMan system was designed to target the 16S rDNA genes with specific primer and probe set. The specificity of the assay was confirmed using 9 A. acidoterrestris strains and 21 non-A. acidoterrestris strains. The results indicated that no combination of the designed primers and probe was found in any Alicyclobacillus genus except A. acidoterrestris. The detection limit of the established IMS-PCR was less than 10CFU/mL and the testing process was accomplished in 2-3h. For the three types of samples (sterile water, apple juice and kiwi juice), the correlation coefficient of standard curves was greater than 0.991, and the calculated PCR efficiencies were from 108% to 109%. As compared with the standard culture method performed concurrently on the same set of samples, the sensitivity, specificity and accuracy of IMS-PCR for 196 naturally contaminated fruit products were 90.0%, 98.3% and 97.5%, respectively. The results exhibited that the proposed IMS-PCR method was effective for the rapid detection of A. acidoterrestris in fruit products. Copyright © 2014. Published by Elsevier B.V.

Commutability of food microbiology proficiency testing samples.

PubMed

Abdelmassih, M; Polet, M; Goffaux, M-J; Planchon, V; Dierick, K; Mahillon, J

2014-03-01

Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results. © 2013 The Society for Applied Microbiology.

Preliminary observations on the effects of milk fortification with conjugated linoleic acid in yogurt preparation

NASA Astrophysics Data System (ADS)

Salamon, R. V.; Albert, I.; András, C. D.; Csapó, J.; Ibănescu, C.

2015-04-01

The fortification and enrichment of food with health benefic natural or natural identical substances creating new functional foods became an important issue for food researchers and processors. However, often occurs that the obtained products (despite of their health benefic activity) cannot be marketed due to strange or accustomed taste and/or texture. The aim of the research was to elucidate the effect of conjugated linoleic acid (CLA) enrichment of raw milk on the rheological properties of the obtained yogurt. The results show that the values of the complex viscosity at 50 rad.s-1 (correlated with the thickness and sliminess of the food gel structures) of the CLA-enriched yogurt was the lowest among the studied samples, meaning the enriched yogurt is more creamy than the commercial products. These observations gave us the hope that, in this case, the texture of enriched product will not present any drawback related to consumer quality judgment.

Progress Towards a Global Understanding of Plankton Dynamics: The Global Alliance of CPR Surveys (GACS)

NASA Astrophysics Data System (ADS)

Batten, S.; Richardson, A.; Melrose, C.; Muxagata, E.; Hosie, G.; Verheye, H.; Hall, J.; Edwards, M.; Koubbi, P.; Abu-Alhaija, R.; Chiba, S.; Wilson, W.; Nagappa, R.; Takahashi, K.

2016-02-01

The Continuous Plankton Recorder (CPR) was first used in 1931 to routinely sample plankton and its continued deployment now sustains the longest-running, and spatially most extensive marine biological sampling programme in the world. Towed behind, for the most part commercial, ships it collects plankton samples from the surface waters that are subsequently analysed to provide taxonomically-resolved abundance data on a broad range of planktonic organisms from the size of coccolithophores to euphausiids. Plankton appear to integrate changes in the physical environment and by underpinning most marine food-webs, pass on this variability to higher trophic levels which have societal value. CPRs are deployed increasingly around the globe in discrete regional surveys that until recently interacted in an informal way. In 2011 the Global Alliance of CPR Surveys (GACS) was launched to bring these surveys together to collaborate more productively and address issues such as: methodological standardization, data integration, capacity building, and data analysis. Early products include a combined global database and regularly-released global marine ecological status reports. There are, of course, limitations to the exploitation of CPR data as well as the current geographic coverage. A current focus of GACS is integration of the data with models to meaningfully extrapolate across time and space. In this way the output could be used to provide more robust synoptic representations of key plankton variables. Recent years have also seen the CPR used as a platform in itself with the inclusion of additional sensors and water samplers that can sample the microplankton. The archive of samples has already been used for some molecular investigations and curation of samples is maintained for future studies. Thus the CPR is a key element of any regional to global ocean observing system of biodiversity.

Strategic development of a multivariate calibration model for the uniformity testing of tablets by transmission NIR analysis.

PubMed

Sasakura, D; Nakayama, K; Sakamoto, T; Chikuma, T

2015-05-01

The use of transmission near infrared spectroscopy (TNIRS) is of particular interest in the pharmaceutical industry. This is because TNIRS does not require sample preparation and can analyze several tens of tablet samples in an hour. It has the capability to measure all relevant information from a tablet, while still on the production line. However, TNIRS has a narrow spectrum range and overtone vibrations often overlap. To perform content uniformity testing in tablets by TNIRS, various properties in the tableting process need to be analyzed by a multivariate prediction model, such as a Partial Least Square Regression modeling. One issue is that typical approaches require several hundred reference samples to act as the basis of the method rather than a strategically designed method. This means that many batches are needed to prepare the reference samples; this requires time and is not cost effective. Our group investigated the concentration dependence of the calibration model with a strategic design. Consequently, we developed a more effective approach to the TNIRS calibration model than the existing methodology.

Crustal heterogeneity of the moon viewed from the Galileo SSI camera: Lunar sample calibrations and compositional implications

NASA Technical Reports Server (NTRS)

Pieters, Carle M.; Belton, M.; Becker, T.; Carr, M. H.; Chapmann, C.; Fanale, F. P.; Fischer, Erich M.; Gaddis, L.; Greeley, Ronald; Greenberg, R.

1991-01-01

Summaries are given of the spectral calibration, compositional parameters, nearside color, and limb and farside color of the Moon. The farside of the Moon, a large area of lunar crust, is dominated by heavily cratered terrain and basin deposits that represent the products of the first half billion years of crustal evolution. Continuing analysis of the returned lunar samples suggest a magma ocean and/or serial magmatism model for evolution of the primordial lunar crust. However, testing either hypothesis requires compositional information about the crustal stratigraphy and lateral heterogeneity. Resolution of this important planetary science issue is dependent on additional data. New Galileo multispectral images indicate previously unknown local and regional compositional diversity of the farside crust. Future analysis will focus on individual features and a more detailed assessment of crustal stratigraphy and heterogeneity.

Phosphodiesterase-5 inhibitors and their analogues as adulterants of herbal and food products: analysis of the Malaysian market, 2014-16.

PubMed

Bujang, Nur Baizura; Chee, Chin Fei; Heh, Choon Han; Rahman, Noorsaadah Abd; Buckle, Michael J C

2017-07-01

Adulteration of herbal health supplements with phosphodiesterase-5 (PDE-5) inhibitors and their analogues is becoming a worldwide problem. The aim of this study was to investigate herbal and food products sold in the Malaysian market for the presence of these adulterants. Sixty-two products that claim to enhance men's sexual health were sampled between April 2014 and April 2016. These products included unregistered products seized by the Pharmacy Enforcement Division of the Ministry of Health (n = 39), products sent to the National Pharmaceutical Regulatory Agency for pre-registration testing (n = 9) and products investigated under the post-registration market surveillance programme (n = 14). The products were tested against an in-house spectral library consisting of 61 PDE-5 inhibitors and analogues using a validated liquid chromatography-mass spectrometry ion-trap-time-of-flight (LC-MS IT-TOF) method. Thirty-two (82%) of the unregistered products and two (14%) of the registered products were found to be adulterated with at least one PDE-5 inhibitor or analogue, while none of the pre-registration products contained adulterants. A total of 16 different adulterants were detected and 36% of the adulterated products contained a mixture of two or more adulterants. This study has demonstrated that the adulteration of unregistered herbal products in the Malaysian market is an alarming issue that needs to be urgently addressed by the relevant authorities.

[Influence of PCR cycle number on microbial diversity analysis through next generation sequencing].

PubMed

An, Yunhe; Gao, Lijuan; Li, Junbo; Tian, Yanjie; Wang, Jinlong; Zheng, Xuejuan; Wu, Huijuan

2016-08-25

Using of high throughput sequencing technology to study the microbial diversity in complex samples has become one of the hottest issues in the field of microbial diversity research. In this study, the soil and sheep rumen chyme samples were used to extract DNA, respectively. Then the 25 ng total DNA was used to amplify the 16S rRNA V3 region with 20, 25, 30 PCR cycles, and the final sequencing library was constructed by mixing equal amounts of purified PCR products. Finally, the operational taxonomic unit (OUT) amount, rarefaction curve, microbial number and species were compared through data analysis. It was found that at the same amount of DNA template, the proportion of the community composition was not the best with more numbers of PCR cycle, although the species number was much more. In all, when the PCR cycle number is 25, the number of species and proportion of the community composition were the most optimal both in soil or chyme samples.

General administrative rulings and decisions; amendment to the examination and investigation sample requirements; companion document to direct final rule--FDA. Proposed rule.

PubMed

1998-09-25

The Food and Drug Administration (FDA) is proposing to amend its regulations regarding the collection of twice the quantity of food, drug, or cosmetic estimated to be sufficient for analysis. This action increases the dollar amount that FDA will consider to determine whether to routinely collect a reserve sample of a food, drug, or cosmetic product in addition to the quantity sufficient for analysis. Experience has demonstrated that the current dollar amount does not adequately cover the cost of most quantities sufficient for analysis plus reserve samples. This proposed rule is a companion to the direct final rule published elsewhere in this issue of the Federal Register. This action is part of FDA's continuing effort to achieve the objectives of the President's "Reinventing Government" initiative, and it is intended to reduce the burden of unnecessary regulations on food, drugs, and cosmetics without diminishing the protection of the public health.

Efficiency of organic acid preparations for the elimination of naturally occurring Salmonella in feed material.

PubMed

Axmann, Sonja; Kolar, Veronika; Adler, Andreas; Strnad, Irmengard

2017-11-01

Salmonella can enter animal stocks via feedstuffs, thus posing not only an infection risk for animals, but also threatening to contaminate food of animal origin and finally humans. Salmonella contamination in feedstuffs is still a recurring and serious issue in animal production (especially for the poultry sector), and is regularly detected upon self-monitoring by feed companies (self-checks) and official inspections authorities. Operators within the feed chain in certain cases need to use hygienic condition enhancers, such as organic acids, to improve the quality of feed for animal nutrition, providing additional guarantees for the protection of animal and public health. The present study investigated the efficiencies of five organic acid preparations. The acid products were added to three different feed materials contaminated with Salmonella (contamination occurred by recontamination in the course of the production process) at seven different inclusion rates (1-7%) and analysed after 1, 2, and 7 days' exposure time using culture method (tenfold analysis). A reliable standard was established for defining a successful decontamination under the prevailing test conditions: 10 Salmonella-negative results out of 10 tested samples (0/10: i.e. 0 positive samples and 10 negative samples). The results demonstrated that the tested preparations showed significant differences with regard to the reduction in Salmonella contamination. At an inclusion rate of 7% of the feed materials, two out of five acid preparations showed an insufficient, very small, decontamination effect, whereas two others had a relatively large partial effect. Reliable decontamination was demonstrated only for one acid preparation, however, subject to the use of the highest acid concentration.

Flow line sampler

DOEpatents

Nicholls, Colin I.

1992-07-14

An on-line product sampling apparatus and method for measuring product samples from a product stream (12) in a flow line (14) having a sampling aperture (11), includes a sampling tube (18) for containing product samples removed from flow line (14). A piston (22) removes product samples from the product stream (12) through the sampling aperture (11) and returns samples to product stream (12). A sensor (20) communicates with sample tube (18), and senses physical properties of samples while the samples are within sample tube (18). In one embodiment, sensor (20) comprises a hydrogen transient nuclear magnetic resonance sensor for measuring physical properties of hydrogen molecules.

Proteomics for the authentication of fish species.

PubMed

Mazzeo, Maria Fiorella; Siciliano, Rosa Anna

2016-09-16

Assessment of seafood authenticity and origin, mainly in the case of processed products (fillets, sticks, baby food) represents the crucial point to prevent fraudulent deceptions thus guaranteeing market transparency and consumers health. The most dangerous practice that jeopardies fish safety is intentional or unintentional mislabeling, originating from the substitution of valuable fish species with inferior ones. Conventional analytical methods for fish authentication are becoming inadequate to comply with the strict regulations issued by the European Union and with the increase of mislabeling due to the introduction on the market of new fish species and market globalization. This evidence prompts the development of high-throughput approaches suitable to identify unambiguous biomarkers of authenticity and screen a large number of samples with minimal time consumption. Proteomics provides suitable and powerful tools to investigate main aspects of food quality and safety and has given an important contribution in the field of biomarkers discovery applied to food authentication. This report describes the most relevant methods developed to assess fish identity and offers a perspective on their potential in the evaluation of fish quality and safety thus depicting the key role of proteomics in the authentication of fish species and processed products. The assessment of fishery products authenticity is a main issue in the control quality process as deceptive practices could imply severe health risks. Proteomics based methods could significantly contribute to detect falsification and frauds, thus becoming a reliable operative first-line testing resource in food authentication. Copyright © 2016 Elsevier B.V. All rights reserved.

Imagery associated with menstruation in advertising targeted to adolescent women.

PubMed

Havens, B; Swenson, I

1988-01-01

Education about menstruation is not restricted to school instruction or information provided by adults and peers; exposure to advertisements in teen media provides imagery depicting menstruation and feminine role expectations. This paper analyzes the imagery in advertisements for sanitary products and products for the relief of menstrual symptoms. A 25% random sample of Seventeen magazine issues from 1976 to 1986 stratified by year were reviewed. A total of 135 ads for sanitary products and 32 ads for products for the relief of menstrual discomfort were analyzed. Each ad was examined for recurrent themes in text, context and tone. Data collected were examined for similarities in themes across both product type and time. The ads depict menstruation as a "hygienic crisis" that is best managed by an effective "security system" affording protection and "peace of mind." The failure of adequate protection places the woman at risk for soiling, staining, embarrassment and odor. Menstruating women are depicted as dynamic, energetic and always functioning at their optimal level. Such imagery may encourage guilt and diminished self-esteem in the adolescent who experiences discomfort. A lack of maternal, teacher or male figures in the ads is evident; the importance of peer support is reinforced.

Storm Prediction Center Day 3-8 Fire Weather Forecast Issued on May 27,

Science.gov Websites

National RADAR Product Archive NOAA Weather Radio Research Non-op. Products Forecast Tools Svr. Tstm information in MS-Word or PDF. Note: Through September 29, 2015 the SPC will issue Experimental Probabilistic

Testing Software Development Project Productivity Model

NASA Astrophysics Data System (ADS)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control, Simulation and etc... This research validates findings from previous work concerning software project productivity and leverages said results in this study. The hypothesized project productivity model provides statistical support and validation of expert opinions used by practitioners in the field of software project estimation.

Impact of ITP on physician visits and workplace productivity.

PubMed

Tarantino, Michael D; Mathias, Susan D; Snyder, Claire F; Isitt, John J; Gernsheimer, Terry; Young, Joan

2010-02-01

To assess the impact of immune thrombocytopenic purpura (ITP) on primary care and specialist visits and workplace productivity. This was a cross-sectional, descriptive study comparing ITP patients to age- and gender-matched controls. Subjects completed a one-time web-based survey, which included questions on work loss, work productivity, and physician visits. ITP patients and controls were compared on these outcomes. For ITP patients, the relationship between work-related issues and physician visits with clinical characteristics (time since diagnosis, platelet count, number of treatments received, and an ITP-specific health-related quality of life measure, the ITP-PAQ) was explored. A total of 1002 ITP patients and 1031 controls completed the survey. On average, ITP patients were 46 years old, diagnosed 9 years ago, and had platelet counts of 148 x 10(9)/L; 37% had undergone splenectomy. More ITP patients had primary care (20% vs. 11%) and specialist (28% vs. 11%) visits in the past month versus controls (p < or = 0.001). Higher proportions of ITP patients have ever taken sick leave (56% vs. 30%), and missed chore hours in the past week (18% vs. 13%) (p < or = 0.003). ITP patients scored significantly worse than controls on all six work productivity items. Patients diagnosed within the past year were more likely to have specialist visits and to miss chore hours versus those diagnosed less recently. Worse ITP-PAQ scores and more ITP-related treatments were related to more physician visits and worse work-related and productivity outcomes. Platelet count is not associated with these outcomes. The study is limited by the potential for biased samples due to recruitment approaches, the inherent issues of a cross-sectional study design and recall bias in questionnaire responses. ITP was consistently associated with more physician visits and worse work and productivity outcomes. Future research should build on these findings by calculating a comprehensive cost-of-illness of ITP including both direct and indirect costs.

Chemometric classification of casework arson samples based on gasoline content.

PubMed

Sinkov, Nikolai A; Sandercock, P Mark L; Harynuk, James J

2014-02-01

Detection and identification of ignitable liquids (ILs) in arson debris is a critical part of arson investigations. The challenge of this task is due to the complex and unpredictable chemical nature of arson debris, which also contains pyrolysis products from the fire. ILs, most commonly gasoline, are complex chemical mixtures containing hundreds of compounds that will be consumed or otherwise weathered by the fire to varying extents depending on factors such as temperature, air flow, the surface on which IL was placed, etc. While methods such as ASTM E-1618 are effective, data interpretation can be a costly bottleneck in the analytical process for some laboratories. In this study, we address this issue through the application of chemometric tools. Prior to the application of chemometric tools such as PLS-DA and SIMCA, issues of chromatographic alignment and variable selection need to be addressed. Here we use an alignment strategy based on a ladder consisting of perdeuterated n-alkanes. Variable selection and model optimization was automated using a hybrid backward elimination (BE) and forward selection (FS) approach guided by the cluster resolution (CR) metric. In this work, we demonstrate the automated construction, optimization, and application of chemometric tools to casework arson data. The resulting PLS-DA and SIMCA classification models, trained with 165 training set samples, have provided classification of 55 validation set samples based on gasoline content with 100% specificity and sensitivity. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

A standard bacterial isolate set for research on contemporary dairy spoilage.

PubMed

Trmčić, A; Martin, N H; Boor, K J; Wiedmann, M

2015-08-01

Food spoilage is an ongoing issue that could be dealt with more efficiently if some standardization and unification was introduced in this field of research. For example, research and development efforts to understand and reduce food spoilage can greatly be enhanced through availability and use of standardized isolate sets. To address this critical issue, we have assembled a standard isolate set of dairy spoilers and other selected nonpathogenic organisms frequently associated with dairy products. This publicly available bacterial set consists of (1) 35 gram-positive isolates including 9 Bacillus and 15 Paenibacillus isolates and (2) 16 gram-negative isolates including 4 Pseudomonas and 8 coliform isolates. The set includes isolates obtained from samples of pasteurized milk (n=43), pasteurized chocolate milk (n=1), raw milk (n=1), cheese (n=2), as well as isolates obtained from samples obtained from dairy-powder production (n=4). Analysis of growth characteristics in skim milk broth identified 16 gram-positive and 13 gram-negative isolates as psychrotolerant. Additional phenotypic characterization of isolates included testing for activity of β-galactosidase and lipolytic and proteolytic enzymes. All groups of isolates included in the isolate set exhibited diversity in growth and enzyme activity. Source data for all isolates in this isolate set are publicly available in the FoodMicrobeTracker database (http://www.foodmicrobetracker.com), which allows for continuous updating of information and advancement of knowledge on dairy-spoilage representatives included in this isolate set. This isolate set along with publicly available isolate data provide a unique resource that will help advance knowledge of dairy-spoilage organisms as well as aid industry in development and validation of new control strategies. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Climate change and food safety: an emerging issue with special focus on Europe.

PubMed

Miraglia, M; Marvin, H J P; Kleter, G A; Battilani, P; Brera, C; Coni, E; Cubadda, F; Croci, L; De Santis, B; Dekkers, S; Filippi, L; Hutjes, R W A; Noordam, M Y; Pisante, M; Piva, G; Prandini, A; Toti, L; van den Born, G J; Vespermann, A

2009-05-01

According to general consensus, the global climate is changing, which may also affect agricultural and livestock production. The potential impact of climate change on food security is a widely debated and investigated issue. Nonetheless, the specific impact on safety of food and feed for consumers has remained a less studied topic. This review therefore identifies the various food safety issues that are likely to be affected by changes in climate, particularly in Europe. Amongst the issues identified are mycotoxins formed on plant products in the field or during storage; residues of pesticides in plant products affected by changes in pest pressure; trace elements and/or heavy metals in plant products depending on changes in their abundance and availability in soils; polycyclic aromatic hydrocarbons in foods following changes in long-range atmospheric transport and deposition into the environment; marine biotoxins in seafood following production of phycotoxins by harmful algal blooms; and the presence of pathogenic bacteria in foods following more frequent extreme weather conditions, such as flooding and heat waves. Research topics that are amenable to further research are highlighted.

Economic issues with follow-on protein products.

PubMed

Lanthier, Michael; Behrman, Rachel; Nardinelli, Clark

2008-09-01

The economic effects of the possible introduction of 'follow-on' protein products have been the subject of recent debate. Here, we aim to explore the economic issues surrounding this debate using three measures: total sales, product complexity and patent expiry. Our analysis shows that the sales of therapeutic protein products are concentrated in a relatively small number of branded products, which may be the most attractive targets for follow-on development. For the years 2013-2015, we estimate that products representing US$20 billion in annual sales--approximately half of all sales in 2006--can be expected to lose patent protection.

NEW DISINFECTION BY-PRODUCT ISSUES: EMERGING DBP'S AND ALTERNATIVE ROUTES OF EXPOSURE

EPA Science Inventory

This paper discusses current issues with drinking water disinfection by-products (DBPs), which include emerging (unregulated) DBPs that can be formed at greater levels with alternative disinfectants (as compared to chlorine) and routes of human exposure (which include inhalation ...

Periodontal Research: Basics and beyond – Part II (Ethical issues, sampling, outcome measures and bias)

PubMed Central

Avula, Haritha

2013-01-01

A good research beginning refers to formulating a well-defined research question, developing a hypothesis and choosing an appropriate study design. The first part of the review series has discussed these issues in depth and this paper intends to throw light on other issues pertaining to the implementation of research. These include the various ethical norms and standards in human experimentation, the eligibility criteria for the participants, sampling methods and sample size calculation, various outcome measures that need to be defined and the biases that can be introduced in research. PMID:24174747

The EuPA Biobank Initiative: Meeting the future challenges of biobanking in proteomics & systems medicine.

PubMed

Wheelock, Åsa M; Paulson, Linda; Litton, Jan-Eric

2015-09-08

In this News & Reviews Discussion, the recently launched EuPA (European Proteomics Association) Biobank Initiative is introduced in the context of current and future challenges in biobanking. The purpose of the initiative is to provide a forumand knowledge platform for integrating the extensive experiences collected by the EuPA community, and link it to the European and international biobanking communities at large. The specific impact of providing a forum and easy access to this type of information to the EuPA community is the potential of improving the quality of future sample collections and biobanks, the quality of the research produced from these sample collections, as well as the output and productivity from existing biobanks. The underutilization of biobanks has recently been identified as an emerging issue of biobankingworldwide. Measures to improve our ability to locate and access appropriate sample collections for a wide range of research purposes may enhance both the scientific quality and biobank sustainability, thereby contributing to the important task of moving our research beyond basic findings and mere publications, into clinical practice. This manuscript is intended as a Discussion piece, and represents a recollection of the presentation under the “EuPA Initiative” session at HUPO/EuPA 2014 in Madrid. The launch of the EuPA (European Proteomics Association) Biobank Initiative in the context of current and future challenges in biobanking is discussed. The purpose of the initiative is to provide a forum and knowledge base for integrating the extensive experiences collected by the EuPA community, and link it to the European and international biobanking communities at large. The specific impact of providing a forumand easy access to this type of information to the EuPA community is the potential of improving the quality of future sample collections and biobanks, the quality of the research produced from these sample collections, aswell as the output and productivity fromexisting biobanks. The underutilization of biobanks has recently been identified as a challenge to the well-being and economic sustainability of biobanking worldwide. Measures to improve our ability to localize and access appropriate sample collections for validation studies and other research purposes is thus of benefit bothto scientific quality and biobank sustainability, thereby contributing to the important task of moving our research beyond basic findings and mere publications, into clinical practice. This article is part of a Special Issue entitled: HUPO 2014.

Hybrid analysis (barcode-high resolution melting) for authentication of Thai herbal products, Andrographis paniculata (Burm.f.) Wall.ex Nees

PubMed Central

Osathanunkul, Maslin; Suwannapoom, Chatmongkon; Khamyong, Nuttaluck; Pintakum, Danupol; Lamphun, Santisuk Na; Triwitayakorn, Kanokporn; Osathanunkul, Kitisak; Madesis, Panagiotis

2016-01-01

Background: Andrographis paniculata Nees is a medicinal plant with multiple pharmacological properties. It has been used over many centuries as a household remedy. A. paniculata products sold on the markets are in processed forms so it is difficult to authenticate. Therefore buying the herbal products poses a high-risk of acquiring counterfeited, substituted and/or adulterated products. Due to these issues, a reliable method to authenticate products is needed. Materials and Methods: High resolution melting analysis coupled with DNA barcoding (Bar-HRM) was applied to detect adulteration in commercial herbal products. The rbcL barcode was selected to use in primers design for HRM analysis to produce standard melting profile of A. paniculata species. DNA of the tested commercial products was isolated and their melting profiles were then generated and compared with the standard A. paniculata. Results: The melting profiles of the rbcL amplicons of the three closely related herbal species (A. paniculata, Acanthus ebracteatus and Rhinacanthus nasutus) are clearly separated so that they can be distinguished by the developed method. The method was then used to authenticate commercial herbal products. HRM curves of all 10 samples tested are similar to A. paniculata which indicated that all tested products were contained the correct species as labeled. Conclusion: The method described in this study has been proved to be useful in aiding identification and/or authenticating A. paniculata. This Bar-HRM analysis has allowed us easily to determine the A. paniculata species in herbal products on the markets even they are in processed forms. SUMMARY We propose the use of DNA barcoding combined with High Resolution Melting analysis for authenticating of Andrographis paniculata products.The developed method can be used regardless of the type of the DNA template (fresh or dried tissue, leaf, and stem).rbcL region was chosen for the analysis and work well with our samplesWe can easily determine the A. paniculata species in herbal products tested. Abbreviations used: bp: Base pair, Tm: Melting temperature PMID:27041863

The ethics of research on stored biological samples: outcomes of a Workshop.

PubMed

Vaz, Manjulika; Sridhar, T S; Pai, Sanjay A

2016-01-01

Research is often conducted using laboratory samples and data. The ethical issues that arise in a study involving residual samples are considerably different from those arising in a prospective study. Some of these ethical issues concern the risks to confidentiality, individual autonomy, trust in and credibility of the researcher or the research, commercialisation and even the nomenclature involved.

GC-MS analysis of polybrominated diphenyl ethers in Lake Erie

NASA Astrophysics Data System (ADS)

Vagula, Mary C.; Vartak, Marissa; Tallmadge, Weslene

2012-06-01

Lake Erie is one of the five great lakes of North America. It is the shallowest, the warmest, and the most biologically productive of the Great Lakes producing more fish than all of the other four lakes combined. It is also a source of drinking water for 11 million people and a recreational asset. On the flipside, it is also very vulnerable and troubled with environmental challenges because it has the smallest water volume, but the greatest pressures from the human settlement. One of the many issues faced by the Lake is pollution. It receives larger loads of many pollutants than any other Great Lake. Even with the best pollution controls many pesticides and organohalogens continue to enter the lake. Polybrominated diphenyl ethers (PBDEs) are a class of flame-retardants that have been used in a variety of consumer products since the 1970s. They are added to many commercial and household products such as computers, foam mattresses, carpets, etc. Being largely non-polar and chemically stable, these chemicals are extremely lipophilic and resist degradation in the environment, thus giving them a high affinity for their bioaccumulation. Due to these properties PBDEs have become ubiquitous environmental contaminants. These compounds are reported to be endocrine disruptors and could cause oxidative damage. This report presents the sample preparation protocol, the GC-MS analysis of PBDEs in Lake Erie sediment samples.

Development of an RNA-based kit for easy generation of TCR-engineered lymphocytes to control T-cell assay performance.

PubMed

Bidmon, Nicole; Kind, Sonja; Welters, Marij J P; Joseph-Pietras, Deborah; Laske, Karoline; Maurer, Dominik; Hadrup, Sine Reker; Schreibelt, Gerty; Rae, Richard; Sahin, Ugur; Gouttefangeas, Cécile; Britten, Cedrik M; van der Burg, Sjoerd H

2018-07-01

Cell-based assays to monitor antigen-specific T-cell responses are characterized by their high complexity and should be conducted under controlled conditions to lower multiple possible sources of assay variation. However, the lack of standard reagents makes it difficult to directly compare results generated in one lab over time and across institutions. Therefore TCR-engineered reference samples (TERS) that contain a defined number of antigen-specific T cells and continuously deliver stable results are urgently needed. We successfully established a simple and robust TERS technology that constitutes a useful tool to overcome this issue for commonly used T-cell immuno-assays. To enable users to generate large-scale TERS, on-site using the most commonly used electroporation (EP) devices, an RNA-based kit approach, providing stable TCR mRNA and an optimized manufacturing protocol were established. In preparation for the release of this immuno-control kit, we established optimal EP conditions on six devices and initiated an extended RNA stability study. Furthermore, we coordinated on-site production of TERS with 4 participants. Finally, a proficiency panel was organized to test the unsupervised production of TERS at different laboratories using the kit approach. The results obtained show the feasibility and robustness of the kit approach for versatile in-house production of cellular control samples. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Investigating the relationship between raw milk bacterial composition, as described by intergenic transcribed spacer-PCR fingerprinting, and pasture altitude.

PubMed

Bonizzi, I; Buffoni, J N; Feligini, M; Enne, G

2009-10-01

To assess the bacterial biodiversity level in bovine raw milk used to produce Fontina, a Protected Designation of Origin cheese manufactured at high-altitude pastures and in valleys of Valle d'Aosta region (North-western Italian Alps) without any starters. To study the relation between microbial composition and pasture altitude, in order to distinguish high-altitude milk against valley and lowland milk. The microflora from milks sampled at different alpine pasture, valley and lowland farms were fingerprinted by PCR of the 16S-23S intergenic transcribed spacers (ITS-PCR). The resulting band patterns were analysed by generalized multivariate statistical techniques to handle discrete (band presence-absence) and continuous (altitude) information. The fingerprints featured numerous bands and marked variability indicating complex, differentiated bacterial communities. Alpine pasture milks were distinguished from lowland ones by cluster analysis, while this technique less clearly discriminated alpine pasture and valley samples. Generalized principal component analysis and clustering-after-ordination enabled a more effective distinction of alpine pasture, valley and lowland samples. Alpine raw milks for Fontina production contain highly diverse bacterial communities, the composition of which is related to the altitude of the pasture where milk was produced. This research may provide analytical support to the important issue represented by the authentication of the geographical origin of alpine milk productions.

Toxoplasma gondii Antibodies in Bulk Tank Milk Samples of Caprine Dairy Herds.

PubMed

Gazzonis, Alessia Libera; Zanzani, Sergio Aurelio; Stradiotto, Katia; Olivieri, Emanuela; Villa, Luca; Manfredi, Maria Teresa

2018-06-15

A major public health issue, Toxoplasma gondii infection can affect humans mainly via the consumption of animal products from certain species, including small ruminants. Therefore, a regular monitoring of the infection in ovine and caprine populations is advisable for the control of human and animal toxoplasmosis. Antibody detection in individual and bulk tank milk may represent a valid alternative to serological analysis, being its collection easy and not affecting animal welfare. Many serological tools for milk analysis have already been validated for several parasites, including Apicomplexa. Thus, the aim of the present study was to obtain epidemiological data on T. gondii infection through the detection of antibodies in bulk tank milk of dairy goat herds from an important area for caprine dairy production (Northern Italy). The performance of a commercial ELISA was first evaluated for analysis on caprine milk samples, using a panel of serum-milk pairs of goats naturally infected by T. gondii. The analysis on bulk tank milk confirmed the presence of antibodies anti-T. gondii in 59% of the samples. Toxoplasma gondii antibody positivity was more frequently found in farms reared under extensive (64.9%) or semi-intensive systems (68.7%) in comparison to intensive farms (51.1%). Analysis on milk revealed to be a valid alternative to serological tests, being easily applied in large-scale epidemiological surveys and for continuous monitoring of T. gondii infection.

Measuring Involvement with Social Issues.

ERIC Educational Resources Information Center

Nowak, Glen J.; Salmon, Charles T.

A study applied research concepts from consumer product involvement to test a model for research on involvement with social issues. Issue involvement was defined as the state or level of perceived importance and/or interest evoked by a stimulus (issue) within a specific situation. Attitudes on four social issues--abortion, pornography, the…

Role of farmer group institutions in increasing farm production and household food security

NASA Astrophysics Data System (ADS)

Rahmadanih; Bulkis, S.; Arsyad, M.; Amrullah, A.; Viantika, N. M.

2018-05-01

Food productions and food security are still becomes serious issue in agriculture development. The research objectives are (1) Examining the role of Farmer Group in increasing farm production and (2) Analyzing the role of Farmer Group in relationship with the household food security. The research was conducted in Soppeng District, South Sulawesi, Indonesia by taking unit of analysis at household level of Farmer Group members. Sample were 6 farmer groups, consisting of 365 households. The Results showed that the Farmer Group has a good role as a production, collaboration and market unit to increase farming production (score 2.3-2.6), but haven’t much impact to increase household food security. Rice production are 4.2 – 6.2 tons per hectare and household food security level are “low and marginal food secure” (mean score 4 and 6). Nevertheless, the role of Farmer Group showed a positive relationship with the level of household food security. So, it is necessarry to increase the role of Farmer Group in order to increase income and household food security based on Farmer Group’s needs and potencies through facilitation of (a) seed and water/irrigation availability, (b) preparing organization rules (AD/ART) and (c) appropriate training and education of food and nutrition.

Use of Real Time Satellite Infrared and Ocean Color to Produce Ocean Products

NASA Astrophysics Data System (ADS)

Roffer, M. A.; Muller-Karger, F. E.; Westhaver, D.; Gawlikowski, G.; Upton, M.; Hall, C.

2014-12-01

Real-time data products derived from infrared and ocean color satellites are useful for several types of users around the world. Highly relevant applications include recreational and commercial fisheries, commercial towing vessel and other maritime and navigation operations, and other scientific and applied marine research. Uses of the data include developing sampling strategies for research programs, tracking of water masses and ocean fronts, optimizing ship routes, evaluating water quality conditions (coastal, estuarine, oceanic), and developing fisheries and essential fish habitat indices. Important considerations for users are data access and delivery mechanisms, and data formats. At this time, the data are being generated in formats increasingly available on mobile computing platforms, and are delivered through popular interfaces including social media (Facebook, Linkedin, Twitter and others), Google Earth and other online Geographical Information Systems, or are simply distributed via subscription by email. We review 30 years of applications and describe how we develop customized products and delivery mechanisms working directly with users. We review benefits and issues of access to government databases (NOAA, NASA, ESA), standard data products, and the conversion to tailored products for our users. We discuss advantages of different product formats and of the platforms used to display and to manipulate the data.

Why do we have such difficulty assessing aerosol impacts in Southeast Asia? Examining the representativeness of regional in situ, remote sensing, and modeling data using examples from a recent field trial

NASA Astrophysics Data System (ADS)

Reid, J.; Hyer, E. J.; Lagrosas, N.; Salinas Cortijo, S. V.; Campbell, J. R.; Chew, B.; Cook, J.; Di Girolamo, L.; Kuciauskas, A. P.; Johnson, R. S.; Jonsson, H.; Lynch, P.; Sessions, W.; Simpas, J. B.; Turk, F. J.; Wang, J.

2012-12-01

Southeast Asia faces numerous climate change issues, and the interaction between aerosol particles, clouds, and precipitation is thought to impact the environment in this region at both weather and climate scales. Aerosol particles have direct radiative effects, indirect effects through interaction with clouds and precipitation, and also act as a tracer for other processes affecting the carbon cycle or atmospheric chemistry. Southeast Asia also hosts some of the most complex meteorological phenomenon of the world, challenging in situ, remote sensing and modeling systems. Indeed, there is more diversity in satellite based aerosol, fire, cloud, and precipitation products in Southeast Asia than perhaps anywhere else in the world outside of the poles. In addition to serious direct challenges to aerosol observability in Southeast Asia, such as persistent ubiquitous cloud cover, there are also contextual biases (such as for aerosol retrievals the classic clear sky bias). Contextual bias affects the representativeness of nearly all aerosol assessments in Southeast Asia. As part of the 7 Southeast Asian Studies (7SEAS) program, a small intensive study was conducted in Singapore and the Palawan Archipelago in September 2011 to study the flow of biomass burning smoke through the South China/East Sea and into the summertime monsoonal trough. Analysis of field data coupled with multiple satellite and model products allowed us to investigate questions on the representativeness of data and to what extent they capture the 'true' state of the meteorological and aerosol environment. Four specific representativeness issues are presented based on IOP examples: 1) Individual biases in retrievals or model simulations; 2) Sampling biases at short time scales based on product coverage; 3) Temporal and spatial scale biases inherent in large and point based measurements; 4) Contextual biases that develop from the aggregation of data products. Considering all four of these issues we conclude with a discussion of strategies for hypothesis testing and the development of regional state vectors with realistic uncertainties.

ANITA (Advanced Network for Isotope and TArget laboratories) - The urgent need for a European target preparation network

NASA Astrophysics Data System (ADS)

Schumann, Dorothea; Sibbens, Goedele; Stolarz, Anna; Eberhardt, Klaus; Lommel, Bettina; Stodel, Christelle

2018-05-01

A wide number of research fields in the nuclear sector requires high-quality and well-characterized samples and targets. Currently, only a few laboratories own or have access to the equipment allowing fulfilling such demands. Coordination of activities and sharing resources is therefore mandatory to meet the increasing needs. This very urgent issue has now been addressed by six European target laboratories with an initiative called ANITA (Advanced Network for Isotope and TArget laboratories). The global aim of ANITA is to establish an overarching research infrastructure service for isotope and target production and develop a tight cooperation between the target laboratories in Europe in order to transfer the knowledge and improve the production techniques of well-characterized samples and targets. Moreover, the interaction of the target producers with the users shall be encouraged and intensified to deliver tailor-made targets best-suited to the envisaged experiments. For the realization of this ambitious goal, efforts within the European Commission and strong support by the target-using communities will be necessary. In particular, an appropriate funding instrument has to be found and applied, enabling ANITA to develop from an initiative employed by the interested parties to a real coordination platform.

Mercury Levels in Locally Manufactured Mexican Skin-Lightening Creams

PubMed Central

Peregrino, Claudia P.; Moreno, Myriam V.; Miranda, Silvia V.; Rubio, Alma D.; Leal, Luz O.

2011-01-01

Mercury is considered one of the most toxic elements for plants and animals. Nevertheless, in the Middle East, Asia and Latin America, whitening creams containing mercury are being manufactured and purchased, despite their obvious health risks. Due to the mass distribution of these products, this can be considered a global public health issue. In Mexico, these products are widely available in pharmacies, beauty aid and health stores. They are used for their skin lightening effects. The aim of this work was to analyze the mercury content in some cosmetic whitening creams using the cold vapor technique coupled with atomic absorption spectrometry (CV-AAS). A total of 16 skin-lightening creams from the local market were investigated. No warning information was noted on the packaging. In 10 of the samples, no mercury was detected. The mercury content in six of the samples varied between 878 and 36,000 ppm, despite the fact that the U.S. Food and Drug Administration (FDA) has determined that the limit for mercury in creams should be less than 1 ppm. Skin creams containing mercury are still available and commonly used in Mexico and many developing countries, and their contents are poorly controlled. PMID:21776243

Biosimilars--global issues, national solutions.

PubMed

Knezevic, Ivana; Griffiths, Elwyn

2011-09-01

Biotechnology derived medicinal products are presently the best characterized biologicals with considerable production and clinical experience, and have revolutionized the treatment of some of the most difficult-to-treat diseases, prolonging and improving the quality of life and patient care. They are also currently one of the fastest growing segments of the pharmaceutical industry market. The critical challenge that the biopharmaceutical industry is facing is the expiry of patents for the first generation of biopharmaceuticals, mainly recombinant DNA derived products, such as interferons, growth hormone and erythropoetin. The question that immediately arose was how should such copies of the originator products be licensed, bearing in mind that they are highly complex biological molecules produced by equally complex biological production processes with their inherent problem of biological variability. Copying biologicals is much more complex than copying small molecules and the critical issue was how to handle the licensing of products if relying in part on data from an innovator product. Since 2004 there has been considerable international consultation on how to deal with biosimilars and biological copy products. This has led to a better understanding of the challenges in the regulatory evaluation of the quality, safety and efficacy of "biosimilars", to the exchange of information between regulators, as well as to the identification of key issues. The aim of this article is to provide a brief overview of the scientific and regulatory challenges faced in developing and evaluating similar biotherapeutic products for global use. It is intended as an introduction to the series of articles in this special issue of Biologicals devoted to similar biotherapeutic products. Copyright © 2011. Published by Elsevier Ltd.

A Surrogate-based Adaptive Sampling Approach for History Matching and Uncertainty Quantification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Weixuan; Zhang, Dongxiao; Lin, Guang

A critical procedure in reservoir simulations is history matching (or data assimilation in a broader sense), which calibrates model parameters such that the simulation results are consistent with field measurements, and hence improves the credibility of the predictions given by the simulations. Often there exist non-unique combinations of parameter values that all yield the simulation results matching the measurements. For such ill-posed history matching problems, Bayesian theorem provides a theoretical foundation to represent different solutions and to quantify the uncertainty with the posterior PDF. Lacking an analytical solution in most situations, the posterior PDF may be characterized with a samplemore » of realizations, each representing a possible scenario. A novel sampling algorithm is presented here for the Bayesian solutions to history matching problems. We aim to deal with two commonly encountered issues: 1) as a result of the nonlinear input-output relationship in a reservoir model, the posterior distribution could be in a complex form, such as multimodal, which violates the Gaussian assumption required by most of the commonly used data assimilation approaches; 2) a typical sampling method requires intensive model evaluations and hence may cause unaffordable computational cost. In the developed algorithm, we use a Gaussian mixture model as the proposal distribution in the sampling process, which is simple but also flexible to approximate non-Gaussian distributions and is particularly efficient when the posterior is multimodal. Also, a Gaussian process is utilized as a surrogate model to speed up the sampling process. Furthermore, an iterative scheme of adaptive surrogate refinement and re-sampling ensures sampling accuracy while keeping the computational cost at a minimum level. The developed approach is demonstrated with an illustrative example and shows its capability in handling the above-mentioned issues. Multimodal posterior of the history matching problem is captured and are used to give a reliable production prediction with uncertainty quantification. The new algorithm reveals a great improvement in terms of computational efficiency comparing previously studied approaches for the sample problem.« less

Methods for implementing a medicine outlet survey: lessons from the anti-malarial market.

PubMed

O'Connell, Kathryn A; Poyer, Stephen; Solomon, Tsione; Munroe, Erik; Patouillard, Edith; Njogu, Julius; Evance, Illah; Hanson, Kara; Shewchuk, Tanya; Goodman, Catherine

2013-02-05

In recent years an increasing number of public investments and policy changes have been made to improve the availability, affordability and quality of medicines available to consumers in developing countries, including anti-malarials. It is important to monitor the extent to which these interventions are successful in achieving their aims using quantitative data on the supply side of the market. There are a number of challenges related to studying supply, including outlet sampling, gaining provider cooperation and collecting accurate data on medicines. This paper provides guidance on key steps to address these issues when conducting a medicine outlet survey in a developing country context. While the basic principles of good survey design and implementation are important for all surveys, there are a set of specific issues that should be considered when conducting a medicine outlet survey. This paper draws on the authors' experience of designing and implementing outlet surveys, including the lessons learnt from ACTwatch outlet surveys on anti-malarial retail supply, and other key studies in the field. Key lessons and points of debate are distilled around the following areas: selecting a sample of outlets; techniques for collecting and analysing data on medicine availability, price and sales volumes; and methods for ensuring high quality data in general. The authors first consider the inclusion criteria for outlets, contrasting comprehensive versus more focused approaches. Methods for developing a reliable sampling frame of outlets are then presented, including use of existing lists, key informants and an outlet census. Specific issues in the collection of data on medicine prices and sales volumes are discussed; and approaches for generating comparable price and sales volume data across products using the adult equivalent treatment dose (AETD) are explored. The paper concludes with advice on practical considerations, including questionnaire design, field worker training, and data collection. Survey materials developed by ACTwatch for investigating anti-malarial markets in sub-Saharan Africa and Asia provide a helpful resource for future studies in this area.

Commercial Instrumentation Technology Associates' Biomedical Experiments

NASA Technical Reports Server (NTRS)

2003-01-01

Experiments to seek solutions for a range of biomedical issues are at the heart of several investigations that will be hosted by the Commercial Instrumentation Technology Associates (ITA), Inc. Biomedical Experiments (CIBX-2) payload. CIBX-2 is unique, encompassing more than 20 separate experiments including cancer research, commercial experiments, and student hands-on experiments from 10 schools as part of ITA's ongoing University Among the Stars program. Student Marnix Aklian and ITA's Mark Bem prepare biological samples for flight as part of ITA's hands-on student outreach program on STS-95. Similar activities are a part of the CIBX-2 payload. The experiments are sponsored by NASA's Space Product Development Program (SPD).

The complete NLO corrections to dijet hadroproduction

NASA Astrophysics Data System (ADS)

Frederix, R.; Frixione, S.; Hirschi, V.; Pagani, D.; Shao, H.-S.; Zaro, M.

2017-04-01

We study the production of jets in hadronic collisions, by computing all contributions proportional to α S n α m , with n + m = 2 and n + m = 3. These correspond to leading and next-to-leading order results, respectively, for single-inclusive and dijet observables in a perturbative expansion that includes both QCD and electroweak effects. We discuss issues relevant to the definition of hadronic jets in the context of electroweak corrections, and present sample phenomenological predictions for the 13-TeV LHC. We find that both the leading and next-to-leading order contributions largely respect the relative hierarchy established by the respective coupling-constant combinations.

The complete NLO corrections to dijet hadroproduction

DOE PAGES

Frederix, R.; Frixione, S.; Hirschi, V.; ...

2017-04-12

We study the production of jets in hadronic collisions, by computing all contributions proportional to αS nα m, with n + m = 2 and n + m = 3. These correspond to leading and next-to-leading order results, respectively, for single-inclusive and dijet observables in a perturbative expansion that includes both QCD and electroweak effects. We discuss issues relevant to the definition of hadronic jets in the context of electroweak corrections, and present sample phenomenological predictions for the 13-TeV LHC. We find that both the leading and next-to-leading order contributions largely respect the relative hierarchy established by the respective coupling-constantmore » combinations.« less

Sample size of the reference sample in a case-augmented study.

PubMed

Ghosh, Palash; Dewanji, Anup

2017-05-01

The case-augmented study, in which a case sample is augmented with a reference (random) sample from the source population with only covariates information known, is becoming popular in different areas of applied science such as pharmacovigilance, ecology, and econometrics. In general, the case sample is available from some source (for example, hospital database, case registry, etc.); however, the reference sample is required to be drawn from the corresponding source population. The required minimum size of the reference sample is an important issue in this regard. In this work, we address the minimum sample size calculation and discuss related issues. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

The issue of applying marketing on the pharmaceutical market in Serbia.

PubMed

Dickov, V; Dickov, A; Martinović-Mitrović, S

2011-03-01

The issue of applying marketing on the pharmaceutical market has the features of subject-based approach, with the intention to appreciate the specific nature of the products, as well as the special characteristics of the complexly formed demand. The relevance of the issue is related to the above-average performance of the pharmaceutical industry, its role in the generation of humanity's demographic transition, and specific development routes of marketing as a scientific and practical discipline. The sensitive nature of a pharmaceutical product on the one hand generates the intense legislation on this market, whereas on the other, the circumstances of its use generate a specific environment in which the production/consumption of the products of pharmaceutical industry is intensively reflected as a specific medical, cultural, economic and even political phenomenon.

Effects of Pesticide Treatments on Nutrient Levels in Worker Honey Bees (Apis mellifera).

PubMed

Feazel-Orr, Haley K; Catalfamo, Katelyn M; Brewster, Carlyle C; Fell, Richard D; Anderson, Troy D; Traver, Brenna E

2016-03-01

Honey bee colony loss continues to be an issue and no factor has been singled out as to the cause. In this study, we sought to determine whether two beekeeper-applied pesticide products, tau-fluvalinate and Fumagilin-B(®), and one agrochemical, chlorothalonil, impact the nutrient levels in honey bee workers in a natural colony environment. Treatments were performed in-hive and at three different periods (fall, spring, and summer) over the course of one year. Bees were sampled both at pre-treatment and two and four weeks post-treatment, weighed, and their protein and carbohydrate levels were determined using BCA and anthrone based biochemical assays, respectively. We report that, based on the pesticide concentrations tested, no significant negative impact of the pesticide products was observed on wet weight, protein levels, or carbohydrate levels of bees from treated colonies compared with bees from untreated control colonies.

How patient outcomes are reported in drug advertisements.

PubMed

Lexchin, J

1999-05-01

To examine how changes in outcomes are reported in drug advertisements in medical journals. Advertisements from a convenience sample of 38 issues of Canadian Family Physician, Canadian Journal of Anaesthesia, Canadian Journal of Psychiatry, Canadian Medical Association Journal, and the New England Journal of Medicine. Method of reporting changes in clinical outcomes (relative risk reduction [RRR], absolute risk reduction [ARR], number needed to treat [NNT]), name of product, and company marketing product were sought. In the 22 advertisements included in the analysis, 11 reported results as RRRs; two reported results as RRRs, but readers could calculate ARRs or NNTs from figures given in the advertisement; and nine gave no measure of results, but readers could calculate RRRs, ARRs, or NNTs from figures given. Most companies report changes in outcomes as RRRs, and this bias could influence the way physicians prescribe. Changes to the rules governing journal advertising and increased emphasis on critical appraisal skills would help mitigate this bias.

Food safety issues: a summary report of a panel session addressing pre- and post-harvest strategies to improve public health.

PubMed

Kirkhorn, Steven R

2008-01-01

The paper presents a summary of a panel presentation by animal scientists and public health veterinarians on food safety methods to improve public health of the public consuming beef and poultry. Pre-harvest methods discussed include vaccination to decrease shedding of Esherichia coli O157:H7, direct-fed microbials (DFMs), calving methods, and responsible use of antimicrobials. Post-harvest methods discussed include increased sampling and use of hazard analysis and critical control point (HACCP) methods, test-and-hold of meat products prior to release for public consumption, development of attainment categories, the use of pulsed field gel electrophoresis (PFGE) for genotyping and serotyping, and an 11-step surveillance program. The public health concern and financial consequences of contamination with E. coli O157:H7 is discussed. A "carrot and stick" approach for both producers and processors to increase vaccination and product testing is recommended.

Sampling of atmospheric carbonyl compounds for determination by liquid chromatography after 2,4-dinitrophenylhydrazine labelling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vairavamurthy, A.; Roberts, J.M.; Newman, L.

1991-02-01

Determination of carbonyl compounds in the ambient atmosphere is receiving increasing attention because of the critical role these compounds play as pollutants and as key participants in tropospheric photochemistry. Carbonyls are involved in photochemical reactions as products of the oxidation of hydrocarbons, precursors of oxidants including ozone and peroxycarboxylic nitric anhydrides (PANs), and as sources of free radicals and organic aerosols. A correct understanding and assessment of the role of carbonyls in tropospheric chemistry requires the accurate and precise measurement of these compounds along with their parent and product compounds. Here we discuss some of these important issues along withmore » the different techniques used for time-integrated collection of carbonyls in the DNPH based liquid chromatographic methods because of their complexity, variability and as well their importance; we emphasize the principles, advantages, and limitations of these techniques. 58 refs., 9 figs., 3 tabs.« less

Effects of Pesticide Treatments on Nutrient Levels in Worker Honey Bees (Apis mellifera)

PubMed Central

Feazel-Orr, Haley K.; Catalfamo, Katelyn M.; Brewster, Carlyle C.; Fell, Richard D.; Anderson, Troy D.; Traver, Brenna E.

2016-01-01

Honey bee colony loss continues to be an issue and no factor has been singled out as to the cause. In this study, we sought to determine whether two beekeeper-applied pesticide products, tau-fluvalinate and Fumagilin-B®, and one agrochemical, chlorothalonil, impact the nutrient levels in honey bee workers in a natural colony environment. Treatments were performed in-hive and at three different periods (fall, spring, and summer) over the course of one year. Bees were sampled both at pre-treatment and two and four weeks post-treatment, weighed, and their protein and carbohydrate levels were determined using BCA and anthrone based biochemical assays, respectively. We report that, based on the pesticide concentrations tested, no significant negative impact of the pesticide products was observed on wet weight, protein levels, or carbohydrate levels of bees from treated colonies compared with bees from untreated control colonies. PMID:26938563

Sexual orientation and differences in mental health, stress, and academic performance in a national sample of U.S. college students.

PubMed

Oswalt, Sara B; Wyatt, Tammy J

2011-01-01

This study examined the relationships of mental health issues and sexual orientation in a national sample of college students. Using the Fall 2009 American College Health Association-National College Health Assessment, responses from heterosexual, gay, lesbian, bisexual, and unsure students (N = 27,454) relating to mental health issues and impact of these issues on academics were examined. The findings indicate that gay, lesbian, bisexual, and unsure students consistently reported higher levels of mental health issues and a more frequent impact on academics because of these issues than heterosexual students. Bisexuals frequently reported higher levels than students identifying as gay, lesbian, and unsure.

Quality characteristics and safety of smoke-flavoured water.

PubMed

Tano-Debrah, Kwaku; Amamoo-Otchere, Joanne; Karikari, A Y; Diako, Charles

2007-06-01

Smoke-flavoured water is produced in Ghana by filling a previously smoked container with potable water and allowing the water to condition with the smoke to attain a characteristic rain water flavour. Owing to the current knowledge on the toxicity, carcinogenicity and other safety issues of some smoke-constituents, the commercial production of the product is becoming a public health concern. This study sought to determine the effects of the smoke-flavouring process on the quality characteristics of smoke-flavoured water to predict the safety of the product. A traditional and a commercial protocol for the production of smoke-flavoured water were simulated in the laboratory and at the site of a company which used to produce the product, respectively. Samples of the flavoured water produced were analyzed for pH, colour, turbidity, conductivity, total hardness, dissolved oxygen content (DO), biochemical oxygen demand (BOD), the polycyclic aromatic hydrocarbon constituents (PAHs), coliform count, and flavour acceptability. Data obtained were evaluated in reference to data on control samples prepared during the investigations. The results obtained suggested that the smoke-flavouring process may not significantly change most of the physico-chemical and microbiological characteristics of the water processed, and thus not affect the drinking quality characteristics of the water. The process however has the potential of adding some organic compounds, which could include polycyclic aromatic hydrocarbons (PAHs), the group that may have the toxicity and carcinogenic effects. The types of PAHs and their concentrations are expected to vary with the process characteristics, but could be insignificantly low to affect the safety of the water. The results suggest a need for some standardization of the process.

Optimization of biogas production using MEMS based near infrared inline-sensor

NASA Astrophysics Data System (ADS)

Saupe, Ray; Seider, Thomas; Stock, Volker; Kujawski, Olaf; Otto, Thomas; Gessner, Thomas

2013-03-01

Due to climate protection and increasing oil prices, renewable energy is becoming extremely important. Anaerobic digestion is a particular environmental and resource-saving way of heat and power production in biogas plants. These plants can be operated decentralized and independent of weather conditions and allow peak load operation. To maximize energy production, plants should be operated at a high efficiency. That means the entire installed power production capacity (e.g. CHP) and biogas production have to be used. However, current plant utilization in many areas is significantly lower, which is economically and environmentally inefficient, since the biochemical process responds to fluctuations in boundary conditions, e.g. mixing in the conditions and substrate composition. At present only a few easily accessible parameters such as fill level, flow rates and temperature are determined on-line. Monitoring of substrate composition occurs only sporadically with the help of laboratory methods. Direct acquisition of substrate composition combined with a smart control and regulation concept enables significant improvement in plant efficiency. This requires a compact, reliable and cost-efficient sensor. It is for this reason that a MEMS sensor system based on NIR spectroscopy has been developed. Requirements are high accuracy, which is the basic condition for exact chemometric evaluation of the sample as well as optimized MEMS design and packaging in order to work in poor environmental conditions. Another issue is sample presentation, which needs an exact adopted optical-mechanical system. In this paper, the development and application of a MEMS-based analyzer for biogas plants will be explained. The above mentioned problems and challenges will be discussed. Measurement results will be shown to demonstrate its performance.

Dendritic cells for active immunotherapy: optimizing design and manufacture in order to develop commercially and clinically viable products.

PubMed

Nicolette, C A; Healey, D; Tcherepanova, I; Whelton, P; Monesmith, T; Coombs, L; Finke, L H; Whiteside, T; Miesowicz, F

2007-09-27

Dendritic cell (DC) active immunotherapy is potentially efficacious in a broad array of malignant disease settings. However, challenges remain in optimizing DC-based therapy for maximum clinical efficacy within manufacturing processes that permit quality control and scale-up of consistent products. In this review we discuss the critical issues that must be addressed in order to optimize DC-based product design and manufacture, and highlight the DC based platforms currently addressing these issues. Variables in DC-based product design include the type of antigenic payload used, DC maturation steps and activation processes, and functional assays. Issues to consider in development include: (a) minimizing the invasiveness of patient biological material collection; (b) minimizing handling and manipulations of tissue at the clinical site; (c) centralized product manufacturing and standardized processing and capacity for commercial-scale production; (d) rapid product release turnaround time; (e) the ability to manufacture sufficient product from limited starting material; and (f) standardized release criteria for DC phenotype and function. Improvements in the design and manufacture of DC products have resulted in a handful of promising leads currently in clinical development.

DARPA Concurrent Design/Concurrent Engineering Workshop Held in Key West, Florida on December 6-8, 1988

DTIC Science & Technology

1988-12-01

engineering disciplines. (Here I refer to training in multifunction team mana ement dir’lplines, quality engineering methods, experimental design by such...4001 SSOME ISSUES S• View of strategic issues has been evolving - Speed of design and product deployment - to accelerate experimentation with new...manufacturingprocess design n New technologies (e.g., composites) which can revolutionize prod-uct technical design in some cases Issue still to be faced: " non

Product vs corporate carbon footprint: Some methodological issues. A case study and review on the wine sector.

PubMed

Navarro, Alejandra; Puig, Rita; Fullana-I-Palmer, Pere

2017-03-01

Carbon footprint (CF) is nowadays one of the most widely used environmental indicators. The scope of the CF assessment could be corporate (when all production processes of a company are evaluated, together with upstream and downstream processes following a life cycle approach) or product (when one of the products is evaluated throughout its life cycle). Our hypothesis was that usually product CF studies (PCF) collect corporate data, because it is easier for companies to obtain them than product data. Six main methodological issues to take into account when collecting corporate data to be used for PCF studies were postulated and discussed in the present paper: fugitive emissions, credits from waste recycling, use of "equivalent factors", reference flow definition, accumulation and allocation of corporate values to minor products. A big project with 18 wineries, being wine one of the most important agri-food products assessed through CF methodologies, was used to study and to exemplify these 6 methodological issues. One of the main conclusions was that indeed, it is possible to collect corporate inventory data in a per year basis to perform a PCF, but having in mind the 6 methodological issues described here. In the literature, most of the papers are presenting their results as a PCF, while they collected company data and obtained, in fact, a "key performance indicator" (ie., CO 2 eq emissions per unit of product produced), which is then used as a product environmental impact figure. The methodology discussed in this paper for the wine case study is widely applicable to any other product or industrial activity. Copyright © 2017 Elsevier B.V. All rights reserved.

Understanding safety and production risks in rail engineering planning and protection.

PubMed

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

Use of Repeated Fluoropolymer Suspensions to Obtain Composite Electrochemical Coating Based on Zinc

NASA Astrophysics Data System (ADS)

Musikhina, T. A.; Zemtsova, E. A.; Fuks, C. L.

2017-11-01

This article deals with the issues of utilization of the waste products of fluoropolymers, namely, the suspensions of fluoroplasts that have lost their consumer properties. Such waste is recommended to be used as a filler of zinc coatings to provide increased corrosion resistance. Using the method of mathematical planning of the experiment, the authors establish the optimal compositions of galvanizing chloride-ammonium electrolytes to obtain the corrosion-resistant composite electrochemical coatings (CEC) of zinc-fluoropolymer. As a result, coatings with a finely crystalline structure were obtained differing in the distribution pattern on the surface of the samples and depending on the variation in the zinc concentration in the electrolytes. The samples of steel reinforcement with the zinc-fluoropolymer coating were tested on corrosion resistance. The increase of anticorrosive properties in CEC zinc-fluoropolymer and a slight decrease in microhardness were indicated.

A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting

PubMed Central

Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won

2017-01-01

The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times. PMID:29149220

A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting.

PubMed

Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won; Ha, Ji-Hyoung

2017-01-01

The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times.

Quality and safety attributes of afghan raisins before and after processing

PubMed Central

McCoy, Stacy; Chang, Jun Won; McNamara, Kevin T; Oliver, Haley F; Deering, Amanda J

2015-01-01

Raisins are an important export commodity for Afghanistan; however, Afghan packers are unable to export to markets seeking high-quality products due to limited knowledge regarding their quality and safety. To evaluate this, Afghan raisin samples from pre-, semi-, and postprocessed raisins were obtained from a raisin packer in Kabul, Afghanistan. The raisins were analyzed and compared to U.S. standards for processed raisins. The samples tested did not meet U.S. industry standards for embedded sand and pieces of stem, total soluble solids, and titratable acidity. The Afghan raisins did meet or exceed U.S. Grade A standard for the number of cap-stems, percent damaged, crystallization levels, moisture content, and color. Following processing, the number of total aerobic bacteria, yeasts, molds, and total coliforms were within the acceptable limits. Although quality issues are present in the Afghan raisins, the process used to clean the raisins is suitable to maintain food safety standards. PMID:25650241

[Methodological limitations and recommendations in publications on migrant population health in Spain].

PubMed

Monge, Susana; Ronda, Elena; Pons-Vigués, Mariona; Vives Cases, Carmen; Malmusi, Davide; Gil-González, Diana

2015-01-01

Our objective was to describe the methodological limitations and recommendations identified by authors of original articles on immigration and health in Spain. A literature review was conducted of original articles published in Spanish or English between 1998 and 2012 combining keywords on immigration and health. A total of 311 articles were included; of these, 176 (56.6%) mentioned limitations, and 15 (4.8%) made recommendations. The most frequently mentioned limitations included the following: reduced sample sizes; internal validity and sample representativeness issues, with under- or overrepresentation of specific groups; problems of validity of the collected information and missing data mostly related to measurement tools; and absence of key variables for adjustment or stratification. Based on these results, a series of recommendations are proposed to minimise common limitations and advance the quality of scientific production on immigration and health in our setting. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

Social Issues: Making Them Relevant and Appropriate to Undergraduate Student Designers

ERIC Educational Resources Information Center

Lofthouse, Vicky

2013-01-01

Sustainable design education is now considered a core issue for industrial/product design courses, however research has shown that the predominant focus tends to be on environmental issues, as social issues are much harder to tackle. Similarly, social issues are rarely considered in industrial practice. If student designers are to become…

Food & Environment. Teaching Global Issues.

ERIC Educational Resources Information Center

Gage, Susan

1989-01-01

Through articles and activities designed for the senior secondary level, students examine the food production system in British Columbia and the world and explore creative, sustainable alternatives for food production. A description of raising food in the first world with the critical issues of energy use and environmental degradation precedes a…

43 CFR 3483.5 - Crediting of production toward diligent development.

Code of Federal Regulations, 2011 CFR

2011-10-01

... development. (a) For Federal coal leases issued after August 4, 1976, all production after the effective date of the Federal lease shall be credited toward diligent development. (b) For Federal coal leases... after August 4, 1976, shall be credited toward diligent development. (c) For Federal coal leases issued...

43 CFR 3483.5 - Crediting of production toward diligent development.

Code of Federal Regulations, 2013 CFR

2013-10-01

... development. (a) For Federal coal leases issued after August 4, 1976, all production after the effective date of the Federal lease shall be credited toward diligent development. (b) For Federal coal leases... after August 4, 1976, shall be credited toward diligent development. (c) For Federal coal leases issued...

43 CFR 3483.5 - Crediting of production toward diligent development.

Code of Federal Regulations, 2014 CFR

2014-10-01

... development. (a) For Federal coal leases issued after August 4, 1976, all production after the effective date of the Federal lease shall be credited toward diligent development. (b) For Federal coal leases... after August 4, 1976, shall be credited toward diligent development. (c) For Federal coal leases issued...

43 CFR 3483.5 - Crediting of production toward diligent development.

Code of Federal Regulations, 2012 CFR

2012-10-01

... development. (a) For Federal coal leases issued after August 4, 1976, all production after the effective date of the Federal lease shall be credited toward diligent development. (b) For Federal coal leases... after August 4, 1976, shall be credited toward diligent development. (c) For Federal coal leases issued...

Sustainable Electronic Roadmap and Forum Summary; Sustainable Electronics Forum, October 15-18, 2012, Racine, WI

EPA Science Inventory

The Roadmap presents critical issues and research questions for each theme. For Theme 1, the issues for limiting the harm from materials and process in electronics industry include identifying the chemicals in products, production process, in the extraction of virgin materials, i...

Patterns and Correlates of Research Productivity in Population Scientists.

ERIC Educational Resources Information Center

Richards, James M., Jr.

Although a concern with population issues has gone out of fashion, the problems underlying that concern have not disappeared. Solving these problems would be facilitated by increased knowledge produced by scientists working directly on population issues. A study was conducted to explore patterns and correlates of research productivity of members…

Methodological considerations in using complex survey data: an applied example with the Head Start Family and Child Experiences Survey.

PubMed

Hahs-Vaughn, Debbie L; McWayne, Christine M; Bulotsky-Shearer, Rebecca J; Wen, Xiaoli; Faria, Ann-Marie

2011-06-01

Complex survey data are collected by means other than simple random samples. This creates two analytical issues: nonindependence and unequal selection probability. Failing to address these issues results in underestimated standard errors and biased parameter estimates. Using data from the nationally representative Head Start Family and Child Experiences Survey (FACES; 1997 and 2000 cohorts), three diverse multilevel models are presented that illustrate differences in results depending on addressing or ignoring the complex sampling issues. Limitations of using complex survey data are reported, along with recommendations for reporting complex sample results. © The Author(s) 2011

An overview of algae biofuel production and potential environmental impact.

PubMed

Menetrez, Marc Y

2012-07-03

Algae are among the most potentially significant sources of sustainable biofuels in the future of renewable energy. A feedstock with virtually unlimited applicability, algae can metabolize various waste streams (e.g., municipal wastewater, carbon dioxide from industrial flue gas) and produce products with a wide variety of compositions and uses. These products include lipids, which can be processed into biodiesel; carbohydrates, which can be processed into ethanol; and proteins, which can be used for human and animal consumption. Algae are commonly genetically engineered to allow for advantageous process modification or optimization. However, issues remain regarding human exposure to algae-derived toxins, allergens, and carcinogens from both existing and genetically modified organisms (GMOs), as well as the overall environmental impact of GMOs. A literature review was performed to highlight issues related to the growth and use of algal products for generating biofuels. Human exposure and environmental impact issues are identified and discussed, as well as current research and development activities of academic, commercial, and governmental groups. It is hoped that the ideas contained in this paper will increase environmental awareness of issues surrounding the production of algae and will help the algae industry develop to its full potential.

Wilderness Medicine Newsletter, 1995.

ERIC Educational Resources Information Center

Weber, Holly, Ed.; Thompson, Ken, Ed.

1995-01-01

This document consists of the six issues of the "Wilderness Medicine Newsletter" issued during 1995. The newsletter addresses issues related to the treatment and prevention of medical emergencies in the wilderness. Issues typically include feature articles, interviews with doctors in the field of wilderness medicine, product reviews,…

Using HEM surveys to evaluate disposal of by-product water from CBNG development in the Powder River Basin, Wyoming

USGS Publications Warehouse

Lipinski, B.A.; Sams, J.I.; Smith, B.D.; Harbert, W.

2008-01-01

Production of methane from thick, extensive coal beds in the Powder River Basin of Wyoming has created water management issues. Since development began in 1997, more than 650 billion liters of water have been produced from approximately 22,000 wells. Infiltration impoundments are used widely to dispose of by-product water from coal bed natural gas (CBNG) production, but their hydrogeologic effects are poorly understood. Helicopter electromagnetic surveys (HEM) were completed in July 2003 and July 2004 to characterize the hydrogeology of an alluvial aquifer along the Powder River. The aquifer is receiving CBNG produced water discharge from infiltration impoundments. HEM data were subjected to Occam's inversion algorithms to determine the aquifer bulk conductivity, which was then correlated towater salinity using site-specific sampling results. The HEM data provided high-resolution images of salinity levels in the aquifer, a result not attainable using traditional sampling methods. Interpretation of these images reveals clearly the produced water influence on aquifer water quality. Potential shortfalls to this method occur where there is no significant contrast in aquifer salinity and infiltrating produced water salinity and where there might be significant changes in aquifer lithology. Despite these limitations, airborne geophysical methods can provide a broadscale (watershed-scale) tool to evaluate CBNG water disposal, especially in areas where field-based investigations are logistically prohibitive. This research has implications for design and location strategies of future CBNG water surface disposal facilities within the Powder River Basin. ?? 2008 2008 Society of ExplorationGeophysicists. All rights reserved.

Recommended protocols for sampling macrofungi

Treesearch

Gregory M. Mueller; John Paul Schmit; Sabine M. Hubndorf Leif Ryvarden; Thomas E. O' Dell; D. Jean Lodge; Patrick R. Leacock; Milagro Mata; Loengrin Umania; Qiuxin (Florence) Wu; Daniel L. Czederpiltz

2004-01-01

This chapter discusses several issues regarding reommended protocols for sampling macrofungi: Opportunistic sampling of macrofungi, sampling conspicuous macrofungi using fixed-size, sampling small Ascomycetes using microplots, and sampling a fixed number of downed logs.

[Determination of short chain chlorinated paraffins in leather products by solid phase extraction coupled with gas chromatography-mass spectrometry].

PubMed

Zhang, Weiya; Wan, Xin; Li, Lixia; Wang, Chengyun; Jin, Shupei; Xing, Jun

2014-10-01

The short chain chlorinated paraffins (SCCPs) are the additives frequently used in the leather production in China, but they have been put into the list of forbidden chemicals issued by European Union recently. In fact, there is not a commonly recognized method for the determination of the SCCPs in the leather products due to the serious matrix interferences from the leather products and the complex chemical structures of the SCCPs. A method of solid phase extraction coupled with gas chromatography-mass spectrometry (SPE-GC-MS) was established for the determination of the SCCPs in the leather products after the optimization of the SPE conditions. It was found that the interferences from the leather products were thor- oughly separated from the analyte of the SCCPs on a home-made solid phase extraction (SPE) column filled with silica packing while eluted with a mixed solvent of n-hexane-methylene chloride (2:1, v/v). With this method, the recoveries for the SCCPs spiked in the real leather samples varied from 90.47% to 99.00% with the relative standard deviations (RSDs) less than 6.7%, and the limits of detection (LODs) were between 0.069 and 0.110 mg/kg. This method is suitable for qualitative and quantitative analysis of SCCPs in the leather products.

Microbiological Quality of the Water used in Agriculture in Sardinia.

PubMed

Sanna, A; Meloni, B; Ruggeri, A; Succa, S; Sanna, C; Carraro, V; Coroneo, V

2016-01-01

The microbiological quality of the water used in irrigation is crucial for the safety of products, such as fruit and vegetables, especially when destined to be consumed raw. However, the microbiological quality of this water is not defined at a community regulatory level or at a national level. With our present work, we wanted to investigate the microbiological quality of the water used for crop irrigation in various Sardinian provinces. Since in most fields the irrigation water is filtered to remove any impurities, the sample was processed twice - both before and after the filtering process. Furthermore, with the purpose of hypothesising the potential health risks attributable to the consumption of crops from the tested fields, samples of horticultural product were collect. Any eventual seasonal differences in the values of microbial concentration were assessed. Microorganism faecal contamination indicators (Escherichia coli, total coliform and faecal streptococci), but even the presence of the opportunistic pathogen such as Pseudomonas aeruginosa were researched in irrigation water. Total mesophilic counts (TMC) were assessed at 36°C and 22°C. On horticultural products we researched both the indicators of process parameters, such as Escherichia coli, Total mesophilic counts at 30°C, Enterobacteriaceae, Total Psychrophilic counts and Pseudomonas aeruginosa, and pathogens, such as Salmonella spp, Listeria monocytogenes and Yersinia enterocolitica. The number of target microorganisms, when present in irrigation water, was very limited: Escherichia coli, total coliform and faecal streptococci, were detected respectively in 48% and 67% of the water samples tested with average concentration values of 0.9, 1.2 and 1.4 log respectively. In fresh vegetable products, the total mesophilic counts (TMC) were found to have average values of 6.6x107 CFU/g. The average values of Enterobacteriaceae totalled 6.1x105 CFU/g; Escherichia coli was detected in only one sample (curly endive) with a value of 180 CFU/g. The data highlights the high quality of the water and how this contributed to achieving satisfactory quality on prime material. However the use of filters, to eliminate impurities, and reservoirs, may represent a crucial issue, if not managed correctly.

Positive lists of cosmetic ingredients: Analytical methodology for regulatory and safety controls - A review.

PubMed

Lores, Marta; Llompart, Maria; Alvarez-Rivera, Gerardo; Guerra, Eugenia; Vila, Marlene; Celeiro, Maria; Lamas, J Pablo; Garcia-Jares, Carmen

2016-04-07

Cosmetic products placed on the market and their ingredients, must be safe under reasonable conditions of use, in accordance to the current legislation. Therefore, regulated and allowed chemical substances must meet the regulatory criteria to be used as ingredients in cosmetics and personal care products, and adequate analytical methodology is needed to evaluate the degree of compliance. This article reviews the most recent methods (2005-2015) used for the extraction and the analytical determination of the ingredients included in the positive lists of the European Regulation of Cosmetic Products (EC 1223/2009): comprising colorants, preservatives and UV filters. It summarizes the analytical properties of the most relevant analytical methods along with the possibilities of fulfilment of the current regulatory issues. The cosmetic legislation is frequently being updated; consequently, the analytical methodology must be constantly revised and improved to meet safety requirements. The article highlights the most important advances in analytical methodology for cosmetics control, both in relation to the sample pretreatment and extraction and the different instrumental approaches developed to solve this challenge. Cosmetics are complex samples, and most of them require a sample pretreatment before analysis. In the last times, the research conducted covering this aspect, tended to the use of green extraction and microextraction techniques. Analytical methods were generally based on liquid chromatography with UV detection, and gas and liquid chromatographic techniques hyphenated with single or tandem mass spectrometry; but some interesting proposals based on electrophoresis have also been reported, together with some electroanalytical approaches. Regarding the number of ingredients considered for analytical control, single analyte methods have been proposed, although the most useful ones in the real life cosmetic analysis are the multianalyte approaches. Copyright © 2016 Elsevier B.V. All rights reserved.

Exposure Assessment Issues in Epidemiology Studies of Phthalates

PubMed Central

Johns, Lauren E.; Cooper, Glinda S.; Galizia, Audrey; Meeker, John D.

2015-01-01

Purpose The purpose of this paper is to review exposure assessment issues that need to be addressed in designing and interpreting epidemiology studies of phthalates, a class of chemicals commonly used in consumer and personal care products. Specific issues include population trends in exposure, temporal reliability of a urinary metabolite measurement, and how well a single urine sample may represent longer-term exposure. The focus of this review is on seven specific phthalates: diethyl phthalate (DEP); di-n-butyl phthalate (DBP); diisobutyl phthalate (DiBP); butyl benzyl phthalate (BBzP); di(2-ethylhexyl) phthalate (DEHP); diisononyl phthalate (DiNP); and diisodecyl phthalate (DiDP). Methods Comprehensive literature search using multiple search strategies Results Since 2001, declines in population exposure to DEP, BBzP, DBP, and DEHP have been reported in the United States and Germany, but DEHP exposure has increased in China. Although the half-lives of various phthalate metabolites are relatively short (3 to 18 hours), the intraclass correlation coefficients (ICCs) for phthalate metabolites, based on spot and first morning urine samples collected over a week to several months, range from weak to moderate, with a tendency toward higher ICCs (greater temporal stability) for metabolites of the shorter-chained (DEP, DBP, DiBP and BBzP, ICCs generally 0.3 to 0.6) compared with those of the longer-chained (DEHP, DiNP, DiDP, ICCs generally 0.1 to 0.3) phthalates. Additional research on optimal approaches to addressing the issue of urine dilution in studies of associations between biomarkers and different type of health effects is needed. Conclusions In conclusion, the measurement of urinary metabolite concentrations in urine could serve as a valuable approach to estimating exposure to phthalates in environmental epidemiology studies. Careful consideration of the strengths and limitations of this approach when interpreting study results is required. PMID:26313703

Western Coordinating Committee-204 goals and why they are important to the future of animal production systems.

PubMed

Cherney, D J R

2004-03-01

There are scientists who believe that science is value-free and that social and ethical issues are not their concern. The birth of Dolly, the cloned lamb, greatly increased public and scientific awareness of ethical issues raised by molecular biology as they intersect with human experience. There are many other issues involving animal production systems, including animal welfare, rural community issues, and environmental concerns. Last year Germany became the first European nation to grant animals a constitutional right. Several European nations ban the use of traditional battery cages for laying hens and gestation crates for sows. In the US, 37 states have recently passed animal anticruelty laws. Times are changing, and if animal production systems are to be part of the future, animal scientists must join with society to solve these ethical issues. The Western Coordinating Committee-204 (WCC-204), Animal Bioethics, has as its goals to 1) create a forum in which animal scientists and nonanimal scientists may work together to examine and discuss contentious social issues, 2) provide a means of encouraging the development of research projects dealing with bioethics of the animal sciences, 3) develop mechanisms of outreach that would allow animal scientists to respond directly to consumers and critics, and 4) provide the means for ongoing critical analysis of the animal science professions in the context of their ability to address moral and sociopolitical issues. Animal scientists can no longer ignore social ethics, and by realizing the goals of Western Coordinating Committee-204, we can help maintain the future of animal production systems.

Integrating post-manufacturing issues into design and manufacturing decisions

NASA Technical Reports Server (NTRS)

Eubanks, Charles F.

1996-01-01

An investigation is conducted on research into some of the fundamental issues underlying the design for manufacturing, service and recycling that affect engineering decisions early in the conceptual design phase of mechanical systems. The investigation focuses on a system-based approach to material selection, manufacturing methods and assembly processes related to overall product requirements, performance and life-cycle costs. Particular emphasis is placed on concurrent engineering decision support for post-manufacturing issues such as serviceability, recyclability, and product retirement.

Safety issues with herbal products.

PubMed

Marrone, C M

1999-12-01

To review safety issues associated with the use of herbal products. Literature accessed through MEDLINE and other Internet search engines. Key search terms included herbs, dietary supplements, and safety. A misconception exists among consumers that herbal remedies are safe because they are natural. In an effort to provide healthcare practitioners with information necessary for a patient discussion, a review of safety concerns with herbal products was conducted. Several safety concerns exist with herbal products including lack of safety data, absence of quality-control requirements for potency and purity, and lenient labeling standards.

GROUND WATER ISSUE: NONAQUEOUS PHASE LIQUIDS COMPATIBILITY WITH MATERIALS USED IN WELL CONSTRUCTION, SAMPLING, AND REMEDIATION.

EPA Science Inventory

This issue paper provides a comprehensive literature review regarding the compatibility of NAPLs with a wide variety of materials used at hazardous waste sites. A condensed reference table of compatibility data for 207 chemicals and 28 commonly used well construction and sampling...

A randomized trial testing the efficacy of modifications to the nutrition facts table on comprehension and use of nutrition information by adolescents and young adults in Canada.

PubMed

Hobin, E; Sacco, J; Vanderlee, L; White, C M; Zuo, F; Sheeshka, J; McVey, G; Fodor O'Brien, M; Hammond, D

2015-12-01

Given the proposed changes to nutrition labelling in Canada and the dearth of research examining comprehension and use of nutrition facts tables (NFts) by adolescents and young adults, our objective was to experimentally test the efficacy of modifications to NFts on young Canadians' ability to interpret, compare and mathematically manipulate nutrition information in NFts on prepackaged food. An online survey was conducted among 2010 Canadians aged 16 to 24 years drawn from a consumer sample. Participants were randomized to view two NFts according to one of six experimental conditions, using a between-groups 2 x 3 factorial design: serving size (current NFt vs. standardized serving-sizes across similar products) x percent daily value (% DV) (current NFt vs. "low/med/high" descriptors vs. colour coding). The survey included seven performance tasks requiring participants to interpret, compare and mathematically manipulate nutrition information on NFts. Separate modified Poisson regression models were conducted for each of the three outcomes. The ability to compare two similar products was significantly enhanced in NFt conditions that included standardized serving-sizes (p ≤ .001 for all). Adding descriptors or colour coding of % DV next to calories and nutrients on NFts significantly improved participants' ability to correctly interpret % DV information (p ≤ .001 for all). Providing both standardized serving-sizes and descriptors of % DV had a modest effect on participants' ability to mathematically manipulate nutrition information to calculate the nutrient content of multiple servings of a product (relative ratio = 1.19; 95% confidence limit: 1.04-1.37). Standardizing serving-sizes and adding interpretive % DV information on NFts improved young Canadians' comprehension and use of nutrition information. Some caution should be exercised in generalizing these findings to all Canadian youth due to the sampling issues associated with the study population. Further research is needed to replicate this study in a more heterogeneous sample in Canada and across a range of food products and categories.

AuScope research infrastructure - supporting Australian mineral discovery

NASA Astrophysics Data System (ADS)

McInnes, B.; Rawling, T.

2016-12-01

Earth and geospatial scientists are heavy users of data products. When industry geologists access spatial data from the field and the exploration office they require data products that are discoverable, searchable, interoperable and attributed with robust metadata. Over the last decade AuScope has utilised NCRIS funding to provide a variety of data products including geophysical data (reflection and passive seismic, magnetotellurics and gravity), GIS layers from state and national geological survey organisations, hyperspectral core logging (National Virtual Core Library) and time-series geospatial data from GNSS and VLBI instruments - all delivered using AuScope GRID technologies based on the Spatial Information Services Stack (SiSS). Perhaps one of the best examples of collaboration to deliver data products to industry users is the National Mineral Library. Working with researchers at Curtin Universities John de Laeter Centre and ANDS, AuScope has also supported the development of a Laboratory Information Management System (LIMS). The project has produced an entirely new workflow, based around a TESCAN TIMA field emission scanning electron microscope, that allows metadata to be collected and recorded from the sample collection and preparation right through to data delivery and publication. This process has facilitated the scanning of a large stockpile of mineral samples from across Western Australia that will produce a state-wide Mineral Library, allowing mineral explorers to better understand the composition of critical rock outcrop samples from all over the state. This new NCRIS supported initiative provides a dataset that underpins both academic and applied research programs and is important for the economic future of Australia. Mining companies do a lot of heavy mineral analysis in research and development but, because there isn't a baseline for mineralogy across each state, it is difficult to have full confidence in the heavy mineral data. This creates an issue for pinpointing where the next major mineral deposits are. Having solid baseline data will help improve targeting, which in turn reduces the costs associated with exploration and supports new discovery.

Information systems - Issues in global habitability

NASA Technical Reports Server (NTRS)

Norman, S. D.; Brass, J. A.; Jones, H.; Morse, D. R.

1984-01-01

The present investigation is concerned with fundamental issues, related to information considerations, which arise in an interdisciplinary approach to questions of global habitability. Information system problems and issues are illustrated with the aid of an example involving biochemical cycling and biochemical productivity. The estimation of net primary production (NPP) as an important consideration in the overall global habitability issue is discussed. The NPP model requires three types of data, related to meteorological information, a land surface inventory, and the vegetation structure. Approaches for obtaining and processing these data are discussed. Attention is given to user requirements, information system requirements, workstations, network communications, hardware/software access, and data management.

Bioprocess automation on a Mini Pilot Plant enables fast quantitative microbial phenotyping.

PubMed

Unthan, Simon; Radek, Andreas; Wiechert, Wolfgang; Oldiges, Marco; Noack, Stephan

2015-03-11

The throughput of cultivation experiments in bioprocess development has drastically increased in recent years due to the availability of sophisticated microliter scale cultivation devices. However, as these devices still require time-consuming manual work, the bottleneck was merely shifted to media preparation, inoculation and finally the analyses of cultivation samples. A first step towards solving these issues was undertaken in our former study by embedding a BioLector in a robotic workstation. This workstation already allowed for the optimization of heterologous protein production processes, but remained limited when aiming for the characterization of small molecule producer strains. In this work, we extended our workstation to a versatile Mini Pilot Plant (MPP) by integrating further robotic workflows and microtiter plate assays that now enable a fast and accurate phenotyping of a broad range of microbial production hosts. A fully automated harvest procedure was established, which repeatedly samples up to 48 wells from BioLector cultivations in response to individually defined trigger conditions. The samples are automatically clarified by centrifugation and finally frozen for subsequent analyses. Sensitive metabolite assays in 384-well plate scale were integrated on the MPP for the direct determination of substrate uptake (specifically D-glucose and D-xylose) and product formation (specifically amino acids). In a first application, we characterized a set of Corynebacterium glutamicum L-lysine producer strains and could rapidly identify a unique strain showing increased L-lysine titers, which was subsequently confirmed in lab-scale bioreactor experiments. In a second study, we analyzed the substrate uptake kinetics of a previously constructed D-xylose-converting C. glutamicum strain during cultivation on mixed carbon sources in a fully automated experiment. The presented MPP is designed to face the challenges typically encountered during early-stage bioprocess development. Especially the bottleneck of sample analyses from fast and parallelized microtiter plate cultivations can be solved using cutting-edge robotic automation. As robotic workstations become increasingly attractive for biotechnological research, we expect our setup to become a template for future bioprocess development.

A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry

NASA Astrophysics Data System (ADS)

Amin, M. A. Mohd; Abas, N. H.; Shahidan, S.; Rahmat, M. H.; Suhaini, N. A.; Nagapan, S.; Rahim, R. Abdul

2017-11-01

Malaysia considers the construction industry as one of the main contributors to its Gross Domestic Product (GDP). However, there are some unresolved issues arising from the ongoing and widespread adoption of the conventional method of construction such as the resultant fragmentation of the industry itself; delays in production and delivery time of unnecessary wastages and lack of sustainability practice. Malaysian Government has been continuously encouraging the industry to use, partly or if not wholly, the Industrialized Building System (IBS), which is considered to be an important part of sustainable construction initiative. IBS was introduced to Malaysia as the solution to issues related to dependencies of foreign workers, raising demand for affordable accommodations and improving image, quality and productivity of construction industry. However, the IBS adoption in Malaysia remains low. This paper presents the review of the current issues and barriers of IBS adoption in Malaysian construction industry.

NORM -- The new kid on the block

DOE Office of Scientific and Technical Information (OSTI.GOV)

Estey, H.P.

1991-12-31

The existence of radioactive materials in accumulations of scale and sludge in oil and gas production equipment is a relatively new issue. This developing issue first gained international attention in 1981 when significant radiation levels were detected on oil and gas production platforms in the North Sea; it didn`t become a domestic issue until 1986 when a similar situation was detected in a Mississippi pipe yard. Most published papers on the occurrence of Naturally Occurring Radioactive Materials (NORM) in oil and gas production equipment have been based on studies of NORM-related activities in the United Kingdom (North Sea NORM). Thismore » paper addresses the occurrences and regulation of NORM in the US oil and gas production industry as experienced, witnessed and/or observed by the author over the past four years.« less

The changing marketing of smokeless tobacco in magazine advertisements.

PubMed

Curry, Laurel E; Pederson, Linda L; Stryker, Jo Ellen

2011-07-01

Concerns about secondhand smoke, increasing indoor smoking bans, and health concerns regarding cigarettes are contributing to the development of new smokeless tobacco (ST) products by the tobacco industry and the repositioning of traditional ST products. The objective of this research was to systematically document the changing advertising strategies and themes of the ST industry. Using descriptive content analysis, this study analyzed 17 nationally circulated magazines for ST advertisements (ads) from 1998-1999 and 2005-2006, recording both magazine and advertisement characteristics (e.g., themes, selling proposition, people portrayed, and setting/surroundings.) Ninety-five unique ads were found during the two time periods-occurring with total frequency of 290 ad placements in 816 issues. One hundred ninety-one ads were found in the 2005-2006 sample, while 99 were found in the 1998-1999 magazines. Significant differences in ST ads were identified between time periods and magazine types. A greater percentage of ads were found in the latter time period, and the average number of ads per issue increased (0.24 in 1998-1999 and 0.49 in 2005-2006, p < .001). More recent magazines and general adult magazines contained a greater proportion of flavored products, "alternative to cigarette" messages, and indoor settings when compared with earlier magazines and men's magazines, respectively. While continuing to advertise in men's magazines with themes appealing to men and "traditional" ST users, the ST industry appears to be simultaneously changing its message placement and content in order to include readers of general adult magazines who may not currently use ST.

Is content of medical journals related to advertisements? Case-control study.

PubMed

Vlassov, Vasiliy V

2007-12-01

To assess the relatedness of journal content to paid advertisements published in the journal. The case-control study was performed on a convenience sample of 7 journals subscribed by Central Medical Library in Moscow--4 international (American Journal of Hypertension, British Journal of General Practice, The Lancet, and New England Journal of Medicine) and 3 Russian peer reviewed journals (Terapevticheskii Arkhiv, Khirurgiia, and Voeno-Meditsinskii Zhurnal). In each issue containing a paid advertisement, classifieds excluded, we searched for articles related to the advertised product and compared this issue with a control issue - the next or a later issue without this advertisement. In American Journal of Hypertension (33 issues from 2002-2004) 94 placements of advertisements were found, 7 of which were closely related to the article topic in the same issue (7/94) vs 2/66 in the control issue. The odds ratio (OR) and 95% confidence interval (CI) for advertisements to be accompanied by related articles was OR, 2.6; 95%CI, 0.5-13). In British Journal of General Practice (27 issues from 2003-2005) there were 7/63 advertisements related to the article topic vs 0/28 in the control issue (OR, 7.2; 95% CI, 1.3 to 44). In The Lancet (49 issues from 2004) there were 8/162 advertisements related to the article topic vs 8/104 in the control issue (OR, 0.6; 95% CI, 0.3-1.5). In New England Journal of Medicine (37 issues from 2004) there were 12/81 advertisements related to the article topic vs 8/75 in the control issue (OR, 1.5; 95% CI, 0.56-3.79). In Terapevticheskii Arkhiv (10 issues from 2004) there were 38/93 advertisements related to the article topic vs 1/83 in the control issue (OR, 56.66; 95% CI, 4.4-253). In Khirurgiia (25 issues from 2003-2005) there were 3/83 advertisements related to the article topic vs 0/70 in the control issue (OR, 2.7; 95% CI, 0.3-26). In Voeno-Meditsinskii Zhurnal (33 issues from 2003-2005) there were 17/31 advertisements related to the article topic vs 2/31 in the control issue (OR,17.6; 95% CI, 3.6-87). The strong relatedness between the content of the articles and advertisements placed in 3 of 7 journals and explicit placement of the advertisements face to face or overleaf the related research articles support the hypothesis that journal content is manipulated to place more emphasis on the advertisements.

Is Content of Medical Journals Related to Advertisements? Case-control Study

PubMed Central

Vlassov, Vasiliy V.

2007-01-01

Aim To assess the relatedness of journal content to paid advertisements published in the journal. Methods The case-control study was performed on a convenience sample of 7 journals subscribed by Central Medical Library in Moscow – 4 international (American Journal of Hypertension, British Journal of General Practice, The Lancet, and New England Journal of Medicine) and 3 Russian peer reviewed journals (Terapevticheskii Arkhiv, Khirurgiia, and Voeno-Meditsinskii Zhurnal). In each issue containing a paid advertisement, classifieds excluded, we searched for articles related to the advertised product and compared this issue with a control issue – the next or a later issue without this advertisement. Results In American Journal of Hypertension (33 issues from 2002-2004) 94 placements of advertisements were found, 7 of which were closely related to the article topic in the same issue (7/94) vs 2/66 in the control issue. The odds ratio (OR) and 95% confidence interval (CI) for advertisements to be accompanied by related articles was OR, 2.6; 95%CI, 0.5-13). In British Journal of General Practice (27 issues from 2003-2005) there were 7/63 advertisements related to the article topic vs 0/28 in the control issue (OR, 7.2; 95% CI, 1.3 to 44). In The Lancet (49 issues from 2004) there were 8/162 advertisements related to the article topic vs 8/104 in the control issue (OR, 0.6; 95% CI, 0.3-1.5). In New England Journal of Medicine (37 issues from 2004) there were 12/81 advertisements related to the article topic vs 8/75 in the control issue (OR, 1.5; 95% CI, 0.56-3.79). In Terapevticheskii Arkhiv (10 issues from 2004) there were 38/93 advertisements related to the article topic vs 1/83 in the control issue (OR, 56.66; 95% CI, 4.4-253). In Khirurgiia (25 issues from 2003-2005) there were 3/83 advertisements related to the article topic vs 0/70 in the control issue (OR, 2.7; 95% CI, 0.3-26). In Voeno-Meditsinskii Zhurnal (33 issues from 2003-2005) there were 17/31 advertisements related to the article topic vs 2/31 in the control issue (OR,17.6; 95% CI, 3.6-87). Conclusions The strong relatedness between the content of the articles and advertisements placed in 3 of 7 journals and explicit placement of the advertisements face to face or overleaf the related research articles support the hypothesis that journal content is manipulated to place more emphasis on the advertisements. PMID:18074412

Amino Acid profile as a feasible tool for determination of the authenticity of fruit juices.

PubMed

Asadpoor, Mostafa; Ansarin, Masoud; Nemati, Mahboob

2014-12-01

Fruit juice is a nutrient rich food product with a direct connection to public health. The purpose of this research was to determine the amino acid profile of juices and provide a quick and accurate indicator for determining their authenticity. The method of analysis was HPLC with fluorescence detector and pre-column derivatization by orthophtaldialdehyde (OPA). Sixty-six samples of fruit juices were analyzed, and fourteen amino acids were identified and determined in the sampled fruit juices. The fruit samples used for this analysis were apples, oranges, cherry, pineapple, mango, apricot, pomegranate, peach and grapes. The results showed that 32% of samples tested in this study had a lower concentrate percentage as compared to that of their labels and/or other possible authenticity problems in the manufacturing process. The following samples showed probable adulteration: four cherry juice samples, two pomegranate juice samples, one mango, three grape, four peach, seven orange, two apple and one apricot juice samples. In general, determining the amount of amino acids and comparing sample amino acids profiles with the standard values seems to be an indicator for quality control. This method can provide the regulatory agencies with a tool, to help produce a healthier juice. The aim of this study is the analytical control of the fruit juice composition is becoming an important issue, and HPLC can provide an important and essential tool for more accurate research as well as for routine analysis.

Energy Productivity: Key to Environmental Protection and Economic Progress. Worldwatch Paper 63.

ERIC Educational Resources Information Center

Chandler, William U.

This report examines various topics and issues related to worldwide energy productivity and energy conservation. Following an introduction, these issues are considered in 6 sections focusing on: (1) energy demand projections (with data on 1982 energy consumption in selected countries); (2) continued industrial efficiency gains (including data on…

Education Statistics Quarterly. Volume 5, Issue 4, 2004. NCES 2005-610

ERIC Educational Resources Information Center

National Center for Education Statistics, 2004

2004-01-01

The "Quarterly" offers an accessible, convenient overview of all NCES products released in a given quarter. Each issue includes: short publications (those less than 15 pages in length) in their entirety, executive summaries of longer publications, descriptive paragraphs of other NCES products, as well as notices about training and funding…

The Timing of Training

DTIC Science & Technology

1992-12-01

Report are the most athorftat~v and modi carefully cousideredl products IDA publishes. They normnally embody recults of mijor projects which (a) hov a...promising approaches to maintaining strong military manpower capability during a period of declining budgets and force levels. This is one of a total ...9 B. Productivity Issues ................................................................................ 12 C. Recruitm ent Issues

9 CFR 71.2 - Secretary to issue rule governing quarantine and interstate movement of diseased animals...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Secretary to issue rule governing quarantine and interstate movement of diseased animals, including poultry. 71.2 Section 71.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE...

9 CFR 71.2 - Secretary to issue rule governing quarantine and interstate movement of diseased animals...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Secretary to issue rule governing quarantine and interstate movement of diseased animals, including poultry. 71.2 Section 71.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE...

9 CFR 71.2 - Secretary to issue rule governing quarantine and interstate movement of diseased animals...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Secretary to issue rule governing quarantine and interstate movement of diseased animals, including poultry. 71.2 Section 71.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE...

9 CFR 71.2 - Secretary to issue rule governing quarantine and interstate movement of diseased animals...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Secretary to issue rule governing quarantine and interstate movement of diseased animals, including poultry. 71.2 Section 71.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE...

Safety Issues at the Defense Production Reactors. A Report to the U.S. Department of Energy.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Physical Sciences, Mathematics, and Resources.

This report provides an assessment of safety management, safety review, and safety methodology employed by the Department of Energy (DOE) and private contractors. Chapter 1, "The DOE Safety Framework," examines safety objectives for production reactors and processes to implement the objectives. Chapter 2, "Technical Issues,"…

Technical note: Alternatives to reduce adipose tissue sampling bias.

PubMed

Cruz, G D; Wang, Y; Fadel, J G

2014-10-01

Understanding the mechanisms by which nutritional and pharmaceutical factors can manipulate adipose tissue growth and development in production animals has direct and indirect effects in the profitability of an enterprise. Adipocyte cellularity (number and size) is a key biological response that is commonly measured in animal science research. The variability and sampling of adipocyte cellularity within a muscle has been addressed in previous studies, but no attempt to critically investigate these issues has been proposed in the literature. The present study evaluated 2 sampling techniques (random and systematic) in an attempt to minimize sampling bias and to determine the minimum number of samples from 1 to 15 needed to represent the overall adipose tissue in the muscle. Both sampling procedures were applied on adipose tissue samples dissected from 30 longissimus muscles from cattle finished either on grass or grain. Briefly, adipose tissue samples were fixed with osmium tetroxide, and size and number of adipocytes were determined by a Coulter Counter. These results were then fit in a finite mixture model to obtain distribution parameters of each sample. To evaluate the benefits of increasing number of samples and the advantage of the new sampling technique, the concept of acceptance ratio was used; simply stated, the higher the acceptance ratio, the better the representation of the overall population. As expected, a great improvement on the estimation of the overall adipocyte cellularity parameters was observed using both sampling techniques when sample size number increased from 1 to 15 samples, considering both techniques' acceptance ratio increased from approximately 3 to 25%. When comparing sampling techniques, the systematic procedure slightly improved parameters estimation. The results suggest that more detailed research using other sampling techniques may provide better estimates for minimum sampling.

Food Supply and Food Safety Issues in China

PubMed Central

Lam, Hon-Ming; Remais, Justin; Fung, Ming-Chiu; Xu, Liqing; Sun, Samuel Sai-Ming

2013-01-01

Food supply and food safety are major global public health issues, and are particularly important in heavily populated countries such as China. Rapid industrialisation and modernisation in China are having profound effects on food supply and food safety. In this Review, we identified important factors limiting agricultural production in China, including conversion of agricultural land to other uses, freshwater deficits, and soil quality issues. Additionally, increased demand for some agricultural products is examined, particularly those needed to satisfy the increased consumption of animal products in the Chinese diet, which threatens to drive production towards crops used as animal feed. Major sources of food poisoning in China include pathogenic microorganisms, toxic animals and plants entering the food supply, and chemical contamination. Meanwhile, two growing food safety issues are illegal additives and contamination of the food supply by toxic industrial waste. China’s connections to global agricultural markets are also having important effects on food supply and food safety within the country. Although the Chinese Government has shown determination to reform laws, establish monitoring systems, and strengthen food safety regulation, weak links in implementation remain. PMID:23746904

Use of genetic algorithms to improve the solid waste collection service in an urban area.

PubMed

Buenrostro-Delgado, Otoniel; Ortega-Rodriguez, Juan Manuel; Clemitshaw, Kevin C; González-Razo, Carlos; Hernández-Paniagua, Iván Y

2015-07-01

Increasing generation of Urban Solid Waste (USW) has become a significant issue in developing countries due to unprecedented population growth and high rates of urbanisation. This issue has exceeded current plans and programs of local governments to manage and dispose of USW. In this study, a Genetic Algorithm for Rule-set Production (GARP) integrated into a Geographic Information System (GIS) was used to find areas with socio-economic conditions that are representative of the generation of USW constituents in such areas. Socio-economic data of selected variables categorised by Basic Geostatistical Areas (BGAs) were taken from the 2000 National Population Census (NPC). USW and additional socio-economic data were collected during two survey campaigns in 1998 and 2004. Areas for sampling of USW were stratified into lower, middle and upper economic strata according to income. Data on USW constituents were analysed using descriptive statistics and Multivariate Analysis. ARC View 3.2 was used to convert the USW data and socio-economic variables to spatial data. Desk-top GARP software was run to generate a spatial model to identify areas with similar socio-economic conditions to those sampled. Results showed that socio-economic variables such as monthly income and education are positively correlated with waste constituents generated. The GARP used in this study revealed BGAs with similar socio-economic conditions to those sampled, where a similar composition of waste constituents generated is expected. Our results may be useful to decrease USW management costs by improving the collection services. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mineral composition of organically grown tomato

NASA Astrophysics Data System (ADS)

Ghambashidze, Giorgi

2014-05-01

In recent years, consumer concerns on environmental and health issues related to food products have increased and, as a result, the demand for organically grown production has grown. Results indicate that consumers concerned about healthy diet and environmental degradation are the most likely to buy organic food, and are willing to pay a high premium. Therefore, it is important to ensure the quality of the produce, especially for highly consumed products. The tomato (Lycopersicon esculentum) is one of the most widely consumed fresh vegetables in the world. It is also widely used by the food industries as a raw material for the production of derived products such as purees or ketchup. Consequently, many investigations have addressed the impact of plant nutrition on the quality of tomato fruit. The concentrations of minerals (P, Na, K, Ca and Mg) and trace elements (Cu, Zn and Mn) were determined in tomatoes grown organically in East Georgia, Marneuli District. The contents of minerals and Mn seem to be in the range as shown in literature. Cu and Zn were found in considerably high amounts in comparison to maximum permissible values established in Georgia. Some correlations were observed between the minerals and trace elements studied. K and Mg were strongly correlated with Cu and Zn. Statistically significant difference have shown also P, K and Mg based between period of sampling.

ELIMINATION OF THE CHARACTERIZATION OF DWPF POUR STREAM SAMPLE AND THE GLASS FABRICATION AND TESTING OF THE DWPF SLUDGE BATCH QUALIFICATION SAMPLE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J.; Peeler, D.; Edwards, T.

2012-05-11

A recommendation to eliminate all characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification sample was made by a Six-Sigma team chartered to eliminate non-value-added activities for the Defense Waste Processing Facility (DWPF) sludge batch qualification program and is documented in the report SS-PIP-2006-00030. That recommendation was supported through a technical data review by the Savannah River National Laboratory (SRNL) and is documented in the memorandums SRNL-PSE-2007-00079 and SRNL-PSE-2007-00080. At the time of writing those memorandums, the DWPF was processing sludge-only waste but, has since transitioned to a coupledmore » operation (sludge and salt). The SRNL was recently tasked to perform a similar data review relevant to coupled operations and re-evaluate the previous recommendations. This report evaluates the validity of eliminating the characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification samples based on sludge-only and coupled operations. The pour stream sample has confirmed the DWPF's ability to produce an acceptable waste form from Slurry Mix Evaporator (SME) blending and product composition/durability predictions for the previous sixteen years but, ultimately the pour stream analysis has added minimal value to the DWPF's waste qualification strategy. Similarly, the information gained from the glass fabrication and PCT of the sludge batch qualification sample was determined to add minimal value to the waste qualification strategy since that sample is routinely not representative of the waste composition ultimately processed at the DWPF due to blending and salt processing considerations. Moreover, the qualification process has repeatedly confirmed minimal differences in glass behavior from actual radioactive waste to glasses fabricated from simulants or batch chemicals. In contrast, the variability study has significantly added value to the DWPF's qualification strategy. The variability study has evolved to become the primary aspect of the DWPF's compliance strategy as it has been shown to be versatile and capable of adapting to the DWPF's various and diverse waste streams and blending strategies. The variability study, which aims to ensure durability requirements and the PCT and chemical composition correlations are valid for the compositional region to be processed at the DWPF, must continue to be performed. Due to the importance of the variability study and its place in the DWPF's qualification strategy, it will also be discussed in this report. An analysis of historical data and Production Records indicated that the recommendation of the Six Sigma team to eliminate all characterization of pour stream glass samples and the glass fabrication and PCT performed with the qualification glass does not compromise the DWPF's current compliance plan. Furthermore, the DWPF should continue to produce an acceptable waste form following the remaining elements of the Glass Product Control Program; regardless of a sludge-only or coupled operations strategy. If the DWPF does decide to eliminate the characterization of pour stream samples, pour stream samples should continue to be collected for archival reasons, which would allow testing to be performed should any issues arise or new repository test methods be developed.« less

Tank 241-C-112 vapor sampling and analysis tank characterization report. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huckaby, J.L.

1995-05-31

Tank 241-C-112 headspace gas and vapor samples were collected and analyzed to help determine the potential risks to tank farm workers due to fugitive emissions from the tank. The drivers and objectives of waste tank headspace sampling and analysis are discussed in {open_quotes}Program Plan for the Resolution of Tank Vapor Issues.{close_quotes} Tank 241-C-112 was vapor sampled in accordance with {open_quotes}Data Quality Objectives for Generic In-Tank Health and Safety Issue Resolution.{close_quotes}

Convenience food products. Drivers for consumption.

PubMed

Brunner, Thomas A; van der Horst, Klazine; Siegrist, Michael

2010-12-01

Convenience is one of the big trends in the food business. The demand for convenience food products is steadily increasing; therefore, understanding convenience food consumption is an important issue. Despite being vital properties of convenience food, saving time and effort have not been very successful constructs for predicting convenience food consumption. To examine a wide range of possible drivers for convenience food consumption, the present study uses a convenience food frequency questionnaire that asks about consumption behavior. A paper-and-pencil questionnaire was sent out to a representative sample of people in German-speaking Switzerland and yielded N = 918 complete datasets from persons mainly responsible for buying and preparing food in the household. The various convenience food products could be categorized into four groups, which we labeled as highly processed food items, moderately processed food items, single components, and salads. Fifteen drivers were found to have a significant impact either on total convenience consumption or on one of the identified categories. Strong predictors were age, concern about naturalness, nutrition knowledge, and cooking skills. Copyright © 2010 Elsevier Ltd. All rights reserved.

The discursive production of professionals about humanizing health: singularity, rights and ethics1

PubMed Central

Silva, Rose Mary Costa Rosa Andrade; de Oliveira, Denize Cristina; Pereira, Eliane Ramos

2015-01-01

Objective: to describe the discursive production of professionals about the humanization of health. Method: qualitative study of descriptive approach, inspired by the social representation theory, with 24 professionals in the healthcare field, working in a university hospital with the established humanization policy. The selection of participants was conducted according to criteria of adequacy and diversity for an intentional sample. Data collection was conducted by semi-structured interviews. Results: through content analysis, three categories emerged, around which the analyses were conducted: "humanizing health as an act of accepting the other as unique", "humanizing health as a matter of right" and "humanizing health as an ethical issue". The discursive production of professionals is based on a perspective which is based on the humanist prospect with socio-historical bias. Conclusion: healthcare professionals must know the National Humanization Policy in order to provide quality care, promoting the meeting, welcoming and recognition of oneself, others and their profession in the political and socio-historical scenario of their country as a citizen, not only of rights, but also of obligations. PMID:26487145

Advances in Polyhydroxyalkanoate (PHA) Production.

PubMed

Koller, Martin

2017-11-02

This editorial paper provides a synopsis of the contributions to the Bioengineering special issue "Advances in Polyhydroxyalkanoate (PHA) Production". It illustrates the embedding of the issue's individual research articles in the current global research and development landscape related to polyhydroxyalkanoates (PHA). The article shows how these articles are interrelated to each other, reflecting the entire PHA process chain including strain selection, metabolic and genetic considerations, feedstock evaluation, fermentation regimes, process engineering, and polymer processing towards high-value marketable products.

Orbit and sampling requirements: TRMM experience

NASA Technical Reports Server (NTRS)

North, Gerald

1993-01-01

The Tropical Rainfall Measuring Mission (TRMM) concept originated in 1984. Its overall goal is to produce datasets that can be used in the improvement of general circulation models. A primary objective is a multi-year data stream of monthly averages of rain rate over 500 km boxes over the tropical oceans. Vertical distributions of the hydrometers, related to latent heat profiles, and the diurnal cycle of rainrates are secondary products believed to be accessible. The mission is sponsored jointly by the U.S. and Japan. TRMM is an approved mission with launch set for 1997. There are many retrieval and ground truth issues still being studied for TRMM, but here we concentrate on sampling since it is the single largest term in the error budget. The TRMM orbit plane is inclined by 35 degrees to the equator, which leads to a precession of the visits to a given grid box through the local hours of the day, requiring three to six weeks to complete the diurnal cycle, depending on latitude. For sampling studies we can consider the swath width to be about 700 km.

Amendment to examination and investigation sample requirements--FDA. Direct final rule.

PubMed

1998-09-25

The Food and Drug Administration (FDA) is amending its regulations regarding the collection of twice the quantity of food, drug, or cosmetic estimated to be sufficient for analysis. This action increases the dollar amount that FDA will consider to determine whether to routinely collect a reserve sample of a food, drug, or cosmetic product in addition to the quantity sufficient for analysis. Experience has demonstrated that the current dollar amount does not adequately cover the cost of most quantities sufficient for analysis plus reserve samples. This direct final rule is part of FDA's continuing effort to achieve the objectives of the President's "Reinventing Government" initiative, and is intended to reduce the burden of unnecessary regulations on food, drugs, and cosmetics without diminishing the protection of the public health. Elsewhere in this issue of the Federal Register, FDA is publishing a companion proposed rule under FDA's usual procedures for notice and comment to provide a procedural framework to finalize the rule in the event the agency receives any significant adverse comment and withdraws this direct final rule.

RT-PCR-DGGE Analysis to Elucidate the Dominant Bacterial Species of Industrial Spanish-Style Green Table Olive Fermentations.

PubMed

Benítez-Cabello, Antonio; Bautista-Gallego, Joaquín; Garrido-Fernández, Antonio; Rantsiou, Kalliopi; Cocolin, Luca; Jiménez-Díaz, Rufino; Arroyo-López, Francisco N

2016-01-01

This paper describes the dominant bacterial species metabolically active through the industrial production of Spanish-style Manzanilla and Gordal olives. For this purpose, samples (brines and fruits) obtained at 0, 15, and 90 fermentation days were analyzed by a culture-independent approach to determine viable cells by reverse transcription of RNA and further PCR-DGGE analysis, detecting at least 7 different species. Vibrio vulnificus, Lactobacillus plantarum group, and Lactobacillus parafarraginis were present in samples from both cultivars; Lactobacillus sanfranciscensis and Halolactobacillus halophilus were detected only in Gordal samples, while Staphylococcus sp. was exclusively found at the onset of Manzanilla fermentations. Physicochemical data showed a typical fermentation profile while scanning electron microscopy confirmed the in situ biofilm formation on the olive epidermis. Different Bacillus, Staphylococcus, and Enterococcus species, not detected during the fermentation process, were also found in the solid marine salt used by the industry for preparation of brines. Elucidation of these non-lactic acid bacteria species role during fermentation is then an appealingly challenge, particularly regarding safety issues.

Family Violence: A Curriculum Sample. Women's Issues Series, Vol. II.

ERIC Educational Resources Information Center

Refugee Women's Alliance, Seattle, WA.

The materials in this curriculum sample are written as an English-as-a-Second-Language (ESL) lesson for immigrants and refugees, designed to begin discussion of family violence. An introductory section outlines issues related to discussion of family violence in the classroom setting, including the importance of opening lines of communication and…

49 CFR 1105.12 - Sample newspaper notices for abandonment exemption cases.

Code of Federal Regulations, 2010 CFR

2010-10-01

... original and 10 copies of any pleading that raises matters other than environmental issues (such as trails... and 10 copies of any pleading that raises matters other than environmental issues (such as trails use... OF ENVIRONMENTAL LAWS § 1105.12 Sample newspaper notices for abandonment exemption cases. In every...

Iranian staff nurses' views of their productivity and human resource factors improving and impeding it: a qualitative study

PubMed Central

Nayeri, Nahid Dehghan; Nazari, Ali Akbar; Salsali, Mahvash; Ahmadi, Fazlollah

2005-01-01

Background Nurses, as the largest human resource element of health care systems, have a major role in providing ongoing, high-quality care to patients. Productivity is a significant indicator of professional development within any professional group, including nurses. The human resource element has been identified as the most important factor affecting productivity. This research aimed to explore nurses' perceptions and experiences of productivity and human resource factors improving or impeding it. Method A qualitative approach was used to obtain rich data; open, semi-structured interviews were also conducted. The sampling was based on the maximum variant approach; data analysis was carried out by content analysis, with the constant comparative method. Results Participants indicated that human resources issues are the most important factor in promoting or impeding their productivity. They suggested that the factors influencing effectiveness of human resource elements include: systematic evaluation of staff numbers; a sound selection process based on verifiable criteria; provision of an adequate staffing level throughout the year; full involvement of the ward sister in the process of admitting patients; and sound communication within the care team. Paying attention to these factors creates a suitable background for improved productivity and decreases negative impacts of human resource shortages, whereas ignoring or interfering with them would result in lowering of nurses' productivity. Conclusion Participants maintained that satisfactory human resources can improve nurses' productivity and the quality of care they provide; thereby fulfilling the core objective of the health care system. PMID:16212672

Issues Validation: A New Environmental Scanning Technique for Family Life Educators.

ERIC Educational Resources Information Center

Weigel, Randy R.; And Others

1992-01-01

Three-state study used Issues Validation, environmental scanning process for family life educators that combines literature reviews, professional and public opinion, and survey research to identify issues facing families and youth. Samples of residents, local advisory committees, and community professionals ranked 30 issues facing families and…

Exploring community pharmacists' views on generic medicines: a nationwide study from Malaysia.

PubMed

Chong, Chee Ping; Hassali, Mohamed Azmi; Bahari, Mohd Baidi; Shafie, Asrul Akmal

2011-02-01

To evaluate the Malaysian community pharmacists' views on generic medicines. A sample of 1419 Malaysian community pharmacies with resident pharmacists. A cross-sectional nationwide survey using a self-completed mailing questionnaire. Pharmacists' views on generic medicines including issues surrounding efficacy, safety, quality and bioequivalence. Responses were received from 219 pharmacies (response rate 15.4%). Only 50.2% of the surveyed pharmacists agreed that all products that are approved as generic equivalents can be considered therapeutically equivalent with the innovator medicines. Around 76% of respondents indicated that generic substitution of narrow therapeutic index medicines is inappropriate. The majority of the pharmacists understood that a generic medicine must contain the same amount of active ingredient (84.5%) and must be in the same dosage form as the innovator brand (71.7%). About 21% of respondents though that generic medicines are of inferior quality compared to innovator medicines. Most of the pharmacists (61.6%) disagreed that generic medicines produce more side-effects than innovator brand. Pharmacists graduated from Malaysian universities, twinning program and overseas universities were not differed significantly in their views on generic medicines. Additionally, the respondents appeared to have difficulty in ascertaining the bioequivalent status of the marketed generic products in Malaysia. The Malaysian pharmacists' have lack of information and/or trust in the generic manufacturing and/or approval system in Malaysia. This issue should be addressed by pharmacy educators and relevant government agencies.

Chemometrics and chromatographic fingerprints to classify plant food supplements according to the content of regulated plants.

PubMed

Deconinck, E; Sokeng Djiogo, C A; Courselle, P

2017-09-05

Plant food supplements are gaining popularity, resulting in a broader spectrum of available products and an increased consumption. Next to the problem of adulteration of these products with synthetic drugs the presence of regulated or toxic plants is an important issue, especially when the products are purchased from irregular sources. This paper focusses on this problem by using specific chromatographic fingerprints for five targeted plants and chemometric classification techniques in order to extract the important information from the fingerprints and determine the presence of the targeted plants in plant food supplements in an objective way. Two approaches were followed: (1) a multiclass model, (2) 2-class model for each of the targeted plants separately. For both approaches good classification models were obtained, especially when using SIMCA and PLS-DA. For each model, misclassification rates for the external test set of maximum one sample could be obtained. The models were applied to five real samples resulting in the identification of the correct plants, confirmed by mass spectrometry. Therefore chromatographic fingerprinting combined with chemometric modelling can be considered interesting to make a more objective decision on whether a regulated plant is present in a plant food supplement or not, especially when no mass spectrometry equipment is available. The results suggest also that the use of a battery of 2-class models to screen for several plants is the approach to be preferred. Copyright © 2017 Elsevier B.V. All rights reserved.

Understanding Vocational Education and Training, Productivity and Workforce Participation: An Issues Paper

ERIC Educational Resources Information Center

Evesson, Justine; Bretherton, Tanya; Buchanan, John; Rafferty, Mike; Considine, Gillian

2009-01-01

This issues paper reports on the findings from the first year of a three-year program of research by the University of Sydney's Workplace Research Centre. The overarching aim of the research is to investigate how, if at all, vocational education and training can make a difference in improving productivity and workforce participation. The authors…

The Production of Software for Distribution in EEC Countries. Copyright and Contract Issues.

ERIC Educational Resources Information Center

Crabb, Geoffrey

This pamphlet begins by discussing two legal issues to be considered when negotiating and formalizing the production of computer programs for distribution within ECC (European Economic Community) countries: protection of the program against unauthorized copying, and the nature of the contracts to be prepared. It is noted that all member states of…

Product Safety: The Stonewall Hearings. Instructor's Guide [and] Student Materials. Business Issues in the Classroom. Revised.

ERIC Educational Resources Information Center

Maxey, Phyllis F.; And Others

One of a series of units on business designed for secondary school students, this packet examines the issues concerning business responsibility for safe products. Teacher and student materials are provided in separate sections. The teacher's guide presents an overview of activities and objectives, five detailed lesson plans, answer keys,…

Primary Healthcare Provider Knowledge, Beliefs and Clinic-Based Practices Regarding Alternative Tobacco Products and Marijuana: A Qualitative Study

ERIC Educational Resources Information Center

Bascombe, Ta Misha S.; Scott, Kimberly N.; Ballard, Denise; Smith, Samantha A.; Thompson, Winifred; Berg, Carla J.

2016-01-01

Use prevalence of alternative tobacco products and marijuana has increased dramatically. Unfortunately, clinical guidelines have focused on traditional cigarettes with limited attention regarding these emerging public health issues. Thus, it is critical to understand how healthcare professionals view this issue and are responding to it. This…

Combination of mass spectrometry-based targeted lipidomics and supervised machine learning algorithms in detecting adulterated admixtures of white rice.

PubMed

Lim, Dong Kyu; Long, Nguyen Phuoc; Mo, Changyeun; Dong, Ziyuan; Cui, Lingmei; Kim, Giyoung; Kwon, Sung Won

2017-10-01

The mixing of extraneous ingredients with original products is a common adulteration practice in food and herbal medicines. In particular, authenticity of white rice and its corresponding blended products has become a key issue in food industry. Accordingly, our current study aimed to develop and evaluate a novel discrimination method by combining targeted lipidomics with powerful supervised learning methods, and eventually introduce a platform to verify the authenticity of white rice. A total of 30 cultivars were collected, and 330 representative samples of white rice from Korea and China as well as seven mixing ratios were examined. Random forests (RF), support vector machines (SVM) with a radial basis function kernel, C5.0, model averaged neural network, and k-nearest neighbor classifiers were used for the classification. We achieved desired results, and the classifiers effectively differentiated white rice from Korea to blended samples with high prediction accuracy for the contamination ratio as low as five percent. In addition, RF and SVM classifiers were generally superior to and more robust than the other techniques. Our approach demonstrated that the relative differences in lysoGPLs can be successfully utilized to detect the adulterated mixing of white rice originating from different countries. In conclusion, the present study introduces a novel and high-throughput platform that can be applied to authenticate adulterated admixtures from original white rice samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing Campus Climates for Lesbian, Gay, Bisexual and Transgender (LGBT) Students: Methodological and Political Issues

ERIC Educational Resources Information Center

Brown, Robert D.; Gortmaker, Valerie J.

2009-01-01

Methodological and political issues arise during the designing, conducting, and reporting of campus-climate studies for LGBT students. These issues interact; making a decision about a methodological issue (e.g., sample size) has an impact on a political issue (e.g., how well the findings will be received). Ten key questions that must be addressed…

Measurement of testosterone in human sexuality research: methodological considerations.

PubMed

van Anders, Sari M; Goldey, Katherine L; Bell, Sarah N

2014-02-01

Testosterone (T) and other androgens are incorporated into an increasingly wide array of human sexuality research, but there are a number of issues that can affect or confound research outcomes. This review addresses various methodological issues relevant to research design in human studies with T; unaddressed, these issues may introduce unwanted noise, error, or conceptual barriers to interpreting results. Topics covered are (1) social and demographic factors (gender and sex; sexual orientations and sexual diversity; social/familial connections and processes; social location variables), (2) biological rhythms (diurnal variation; seasonality; menstrual cycles; aging and menopause), (3) sample collection, handling, and storage (saliva vs. blood; sialogogues, saliva, and tubes; sampling frequency, timing, and context; shipping samples), (4) health, medical issues, and the body (hormonal contraceptives; medications and nicotine; health conditions and stress; body composition, weight, and exercise), and (5) incorporating multiple hormones. Detailing a comprehensive set of important issues and relevant empirical evidence, this review provides a starting point for best practices in human sexuality research with T and other androgens that may be especially useful for those new to hormone research.

Computer aided design and manufacturing: analysis and development of research issues

NASA Astrophysics Data System (ADS)

Taylor, K.; Jadeja, J. C.

2005-11-01

The paper focuses on the current issues in the areas of computer aided manufacturing and design. The importance of integrating CAD and CAM is analyzed. The associated issues with the integration and recent advancements in this field have been documented. The development of methods for enhancing productivity is explored. A research experiment was conducted in the laboratories of West Virginia University with an objective to portray effects of various machining parameters on production. Graphical results and their interpretations are supplied to better realize the main purpose of the experimentation.

American Society of Limnology and Oceanography Symposium Report on What Controls Phytoplankton Production in Nutrient-Rich Areas of the Open Sea Held at San Marcos, California on 22-24 February 1991

DTIC Science & Technology

1991-06-25

issue of Lininology and Oceantg- raphv (in prep.) was provided by: the U.S. Environmental Protection Agency’s Global Change Research Program and the...proposition, along with the outstanding scientific issues , call for rigorous discussion and debate on the regulation of productivity in these regions. To...this issue are convinced that sufficient evidence exists in support of the hypothesis that iron plays an important role in regulating the produc

The National Shipbuilding Research Program. Proceedings of tghe IREASPS Technical Symposium. Paper No. 23: Productivity Issues in Naval Shipbuilding

DTIC Science & Technology

1982-09-01

potential for gains from this strategy has been blunted by legislation, unions and social norms which no longer permit the " sweatshop " mentality in our...positive impact on shipbuilding productivity. Our intent here is not to attempt to provide the ultimate specifica- tion for management success, but...the increasing involvement by both management and workers to jointly address productivity issues. This also reflects the changing social norms and

Introduction to NASA Symposium on Productivity and Quality

NASA Technical Reports Server (NTRS)

Braunstein, David

1984-01-01

The discussions will concentrate on white-collar organizational issues common to large organizations. The program will address a number of management issues for improving our nation's productivity and quality, and therefore its competitive position. executives have contributed their time to share /their experience with you. In addition, the American Institute of Astronautics & Aeronautics corporate members have helped to organize the sessions. I am most grateful for this support. The NASA Administrator has set the goal for NASA to become a leader in productivity and quality.

In Situ Visualization of the Phase Behavior of Oil Samples Under Refinery Process Conditions.

PubMed

Laborde-Boutet, Cedric; McCaffrey, William C

2017-02-21

To help address production issues in refineries caused by the fouling of process units and lines, we have developed a setup as well as a method to visualize the behavior of petroleum samples under process conditions. The experimental setup relies on a custom-built micro-reactor fitted with a sapphire window at the bottom, which is placed over the objective of an inverted microscope equipped with a cross-polarizer module. Using reflection microscopy enables the visualization of opaque samples, such as petroleum vacuum residues, or asphaltenes. The combination of the sapphire window from the micro-reactor with the cross-polarizer module of the microscope on the light path allows high-contrast imaging of isotropic and anisotropic media. While observations are carried out, the micro-reactor can be heated to the temperature range of cracking reactions (up to 450 °C), can be subjected to H2 pressure relevant to hydroconversion reactions (up to 16 MPa), and can stir the sample by magnetic coupling. Observations are typically carried out by taking snapshots of the sample under cross-polarized light at regular time intervals. Image analyses may not only provide information on the temperature, pressure, and reactive conditions yielding phase separation, but may also give an estimate of the evolution of the chemical (absorption/reflection spectra) and physical (refractive index) properties of the sample before the onset of phase separation.

Origins of hydrocarbon gas seeping out from offshore mud volcanoes in the Nile delta

NASA Astrophysics Data System (ADS)

Prinzhofer, Alain; Deville, Eric

2013-04-01

This paper discusses the origin of gas seepages (free gas or dissolved gas in ground water or brine) sampled with the Nautile submarine during the Nautinil cruise at the seafloor of the deep water area of the Nile turbiditic system on different mud volcanoes and brine pools. Generally, the gas is wet and includes C1, C2, C3, iC4, nC4, CO2. These gas samples show no evidence of biodegradation which is not the case of the gas present in the deep hydrocarbon accumulations at depth. It indicates that the gas expelled by the mud volcanoes is not issued from direct leakages from deep gas fields. The collected gas samples mainly have a thermogenic origin and show different maturities. Some samples show very high maturities indicating that these seepages are sourced from great depths, below the Messinian salt. Moreover, the different chemical compositions of the gas samples reflect not only differences in maturity but also the fact that the gas finds its origin in different deep source rocks. Carbon dioxide has an organic signature and cannot result from carbonate decomposition or mantle fluids. The crustal-derived radiogenic isotopes show that the analyzed gas samples have suffered a fractionation processes after the production of the radiogenic isotopes, due either to oil occurrence at depth interacting with the flux of gas, and/or fractionation during the fluid migration.

Biocides Steering Group on human exposure assessment: a preliminary report.

PubMed

van Hemmen, J J

1999-06-30

In a project granted by DG XI of the European Commission, it is attempted to collate experimental and theoretical data on human (workers and consumers) exposure assessment to biocidal products, and to outline the methodology for sampling and measurement. On the basis of the available evidence, approaches are presented for the exposure assessment to be used for estimation of risks in authorization procedures under the recently accepted Directive 98/8/EC. Gaps in knowledge are indicated, making it possible to study the issues involved in a comprehensive and cost-effective way. Some recommendations are given on how to best do this. The current project has been detailed in a final report.

76 FR 19975 - Proposed Information Collection; Comment Request; Survey of Building and Zoning Permit Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... local building permit officials needed for updating the universe of permit-issuing places. The questions... issued. The universe of permit-issuing places is the sampling frame for the Building Permits Survey (BPS...

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement.

PubMed

de Vet, W W J M; Kleerebezem, R; van der Wielen, P W J J; Rietveld, L C; van Loosdrecht, M C M

2011-07-01

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation. Copyright © 2011 Elsevier Ltd. All rights reserved.

Gluten-Free Foods in Rural Maritime Provinces: Limited Availability, High Price, and Low Iron Content.

PubMed

Jamieson, Jennifer A; Gougeon, Laura

2017-12-01

We investigated the price difference between gluten-free (GF) and gluten-containing (GC) foods available in rural Maritime stores. GF foods and comparable GC items were sampled through random visits to 21 grocery stores in nonurban areas of Nova Scotia, New Brunswick, and Prince Edward Island, Canada. Wilcoxon rank tests were conducted on price per 100 g of product, and on the price relative to iron content; 2226 GF foods (27.2% staple items, defined as breads, cereals, flours, and pastas) and 1625 GC foods were sampled, with an average ± SD of 66 ± 2.7 GF items per store in rural areas and 331 ± 12 in towns. The median price of GF items ($1.76/100 g) was more expensive than GC counterparts ($1.05/100 g) and iron density was approximately 50% less. GF staple foods were priced 5% higher in rural stores than in town stores. Although the variety of GF products available to consumers has improved, higher cost and lower nutrient density remain issues in nonurban Maritime regions. Dietitians working in nonurban areas should consider the relative high price, difficult access, and low iron density of key GF items, and work together with clients to find alternatives and enhance their food literacy.

Stress-Induced Fracturing of Reservoir Rocks: Acoustic Monitoring and μCT Image Analysis

NASA Astrophysics Data System (ADS)

Pradhan, Srutarshi; Stroisz, Anna M.; Fjær, Erling; Stenebråten, Jørn F.; Lund, Hans K.; Sønstebø, Eyvind F.

2015-11-01

Stress-induced fracturing in reservoir rocks is an important issue for the petroleum industry. While productivity can be enhanced by a controlled fracturing operation, it can trigger borehole instability problems by reactivating existing fractures/faults in a reservoir. However, safe fracturing can improve the quality of operations during CO2 storage, geothermal installation and gas production at and from the reservoir rocks. Therefore, understanding the fracturing behavior of different types of reservoir rocks is a basic need for planning field operations toward these activities. In our study, stress-induced fracturing of rock samples has been monitored by acoustic emission (AE) and post-experiment computer tomography (CT) scans. We have used hollow cylinder cores of sandstones and chalks, which are representatives of reservoir rocks. The fracture-triggering stress has been measured for different rocks and compared with theoretical estimates. The population of AE events shows the location of main fracture arms which is in a good agreement with post-test CT image analysis, and the fracture patterns inside the samples are visualized through 3D image reconstructions. The amplitudes and energies of acoustic events clearly indicate initiation and propagation of the main fractures. Time evolution of the radial strain measured in the fracturing tests will later be compared to model predictions of fracture size.

Farmer Perceptions of Soil and Water Conservation Issues: Implications to Agricultural and Extension Education.

ERIC Educational Resources Information Center

Bruening, Thomas H.; Martin, Robert A.

A sample of 731 farmers was surveyed to identify perceptions regarding selected soil and water conservation practices. The sample was stratified and proportioned by conservation district to have a representative group of respondents across Iowa. Items on the mailed questionnaire were designed to assess perceptions regarding issues in soil and…

Plastics in the Ocean: Engaging Students in Core Competencies Through Issues-Based Activities in the Science Classroom.

NASA Astrophysics Data System (ADS)

Fergusson-Kolmes, L. A.

2016-02-01

Plastic pollution in the ocean is a critical issue. The high profile of this issue in the popular media makes it an opportune vehicle for promoting deeper understanding of the topic while also advancing student learning in the core competency areas identified in the NSF's Vision and Change document: integration of the process of science, quantitative reasoning, modeling and simulation, and an understanding of the relationship between science and society. This is a challenging task in an introductory non-majors class where the students may have very limited math skills and no prior science background. In this case activities are described that ask students to use an understanding of density to make predictions and test them as they consider the fate of different kinds of plastics in the marine environment. A comparison of the results from different sampling regimes introduces students to the difficulties of carrying out scientific investigations in the complex marine environment as well as building quantitative literacy skills. Activities that call on students to make connections between global issues of plastic pollution and personal actions include extraction of microplastic from personal care products, inventories of local plastic-recycling options and estimations of contributions to the waste stream on an individual level. This combination of hands-on-activities in an accessible context serves to help students appreciate the immediacy of the threat of plastic pollution and calls them to reflect on possible solutions.

What Can You Do with a Returned Sample of Martian Dust?

NASA Technical Reports Server (NTRS)

Zolensky, Michael E.; Nakamura-Messenger, K.

2007-01-01

A major issue that we managed to successfully address for the Stardust Mission was the magnitude and manner of preliminary examination (PET) of the returned samples, which totaled much less than 1 mg. Not since Apollo and Luna days had anyone faced this issue, and the lessons of Apollo PET were not extremely useful because of the very different sample masses in this case, and the incredible advances in analytical capabilities since the 1960s. This paper reviews some of the techniques for examination of small very rare samples that would be returned from Mars missions.

Detection of Listeria spp. in liquid egg products and in the egg breaking plants environment and tracking of Listeria monocytogenes by PFGE.

PubMed

Rivoal, Katell; Fablet, Aurore; Courtillon, Céline; Bougeard, Stéphanie; Chemaly, Marianne; Protais, Jocelyne

2013-08-16

Human listeriosis, caused by Listeria monocytogenes, is a severe bacterial infection that can lead to meningitis, cerebromeningitis, bacteremia or septicemia, with acute lethality and potentially leading to death. A study has shown that 29.5% of the caged laying hens in France are contaminated by L. monocytogenes (Chemaly et al., 2008). However, very little information regarding egg and egg product contamination is currently available. The objective of this study is to determine the sanitary status of egg products and egg breaking plants in France regarding Listeria spp. and L. monocytogenes contaminations. The sampling scheme performed in five egg breaking plants in Western France during one year have revealed that 8.5% of raw egg products were contaminated by L. monocytogenes. No pasteurized egg products have been shown to be contaminated by L. monocytogenes. However, a high level of contamination by Listeria spp., and particularly by L. innocua, has been shown with 26.2% and 1.8% of raw and pasteurized egg products contaminated, respectively. This work has also revealed the presence of Listeria spp. and L. monocytogenes in the environment of egg breaking plants with 65.1% and 8.0% of contaminated samples, respectively. The typing of 253 isolates of L. monocytogenes by PFGE using ApaI and AscI enzymes has revealed a high diversity with 46 different pulsotypes and has shown that the raw material is a source of contamination of egg breaking plants. One L. monocytogenes cluster was dominant in the 5 egg-breaking plants during the four seasons studied. The issue of which strains are better adapted to egg products must be considered and studied in depth by comparing them to pulsotypes from strains of other chains. However, the traceability of L. monocytogenes in plants during the various seasons has also made it possible to highlight the presence of strains that are specific to egg breaking plants. The study of cleaning and disinfection methods in these plants as well as the recurring bacteria's resistance to disinfectants could provide answers to the egg product industry. Copyright © 2013 Elsevier B.V. All rights reserved.

The Effect of Collective Bargaining on the Issue of "Excellence or Equality" in Higher Education.

ERIC Educational Resources Information Center

Kaufman, Jacob J.; Flanary, Patricia E.

What is the effect of collective bargaining on the issue of excellence or equality in higher education? Relevant to this discussion are: (1) institutions of higher education vary so greatly in goals, student bodies, and products that we cannot study higher education as a single industry producing a single product; (2) the economic and political…

Voices from the local communities (Voces de las comunidades locales)

Treesearch

Ma. Elena Baca Gomez; Jorge Cordero; Carmela Wallace; Alberto Lafon

2006-01-01

We would have liked to hear more talks about production issues and alternative modes of production, such as the one given about ecotourism activities. However, the examples and experiences from Sonora and the United States were very useful and interesting. In a subsequent meeting, we would like to hear more about legal and organizational issues and not so much about...

Moving from the Classroom to the Workplace: A Service-Learning Case Study of a Media Production Capstone Course

ERIC Educational Resources Information Center

Giese, Mark

2013-01-01

This is a case study of how a capstone course, Producing and Directing, evolved into a service-learning course designed to provide graduating students with real-world workplace experience. It will examine issues including course structure, grading issues, course and client logistics, unaddressed skill sets, group work, and work-product quality…

Observing the ocean with different platforms/methods. Advantages, disadvantages and lessons learnt

NASA Astrophysics Data System (ADS)

Petihakis, George; Potiris, Manolis; Ntoumas, Manolis; Frangoulis, Kostas; Tsiaras, Kostas; Triantafyllou, George; Pollani, Annika

2015-04-01

Methods for observing/measuring the ocean, present remarkable diversity. In situ sampling or remote sensing, automated or not measurements with sensing probes, utilize different measuring principles, sample different parts of the system, are characterized by different accuracy/precision and sample over a large range of spatial and temporal scales with variable resolution. Measurements, quite often are dependent on the platform design and the platform interaction with the highly variable ambient environment. To add to the aforementioned issues that render the combination of data from different sources challenging from a scientific perspective, there are also a number of technical and data issues. These are important for the good operational status of the platforms, the smooth data flow and the collection of appropriate meta-data. Finally the raw data files need to be processed into a user friendly output format so the operator will be able to identify as early as possible sensor drift and failures. In this work, data from different observation platforms/sensors is analysed and compared, while mechanisms and processes responsible for differences are identified. More detailed, temperature, salinity and chlorophyll data from four fixed observing stations, one Ferry Box, satellites and a monthly in situ sampling program, is used. Main results indicate that a) regular calibration according to expected parameter range and well-defined, consistent deployment plan of proven sensors is sufficient for acquiring high quality data in the long term. Better knowledge of site specific response of new instrumentation is required for producing consistent long term data b) duplicate sensors on one platform considerably improve data flow and data quality c) if an area is sampled by multiple platforms, then platform dependent errors can be quantified d) fixed point observatories are efficient tools for assessing regional performance of satellite products. Higher vertical and temporal sampling rate of the upper 20m of the water column increase inter-comparability between the two platforms e) delayed mode, lower processing level data/meta-data should be archived and disseminated in addition to standard formatted files due to analysis artifacts and loss of information during transmission and processing.

Norwegian farmers ceasing certified organic production: characteristics and reasons.

PubMed

Flaten, Ola; Lien, Gudbrand; Koesling, Matthias; Løes, Anne-Kristin

2010-12-01

This article examines the characteristics of and reasons for Norwegian farmers' ceasing or planning to cease certified organic production. We gathered cross-sectional survey data in late 2007 from organic farmers deregistering between January 2004 and September 2007 (n=220), and similar data from a random sample of farmers with certified organic management in 2006 (n=407). Of the respondents deregistering by November 2007, 17% had quit farming altogether, 61% now farmed conventionally, and 21% were still farming by organic principles, but without certification. Nearly one in four organic farmers in 2007 indicated that they planned to cease certification within the next 5-10 years. From the two survey samples, we categorised farmers who expect to be deregistered in 5-10 years into three groups: conventional practices (n=139), continuing to farm using organic principles (uncertified organic deregistrants, n=105), and stopped farming (n=33). Of the numerous differences among these groups, two were most striking: the superior sales of uncertified organic deregistrants through consumer-direct marketing and the lowest shares of organic land among conventional deregistrants. We summarised a large number of reasons for deregistering into five factors through factor analysis: economics, regulations, knowledge-exchange, production, and market access. Items relating to economics and regulations were the primary reasons offered for opting out. The regression analysis showed that the various factors were associated with several explanatory variables. Regulations, for example, figured more highly among livestock farmers than crop farmers. The economic factor strongly reflected just a few years of organic management. Policy recommendations for reducing the number of dropouts are to focus on economics, environmental attitudes, and the regulatory issues surrounding certified organic production. Copyright © 2010 Elsevier Ltd. All rights reserved.

The compositional mosaic of Fusarium species and their mycotoxins in unprocessed cereals, food and feed products in Belgium.

PubMed

Vanheule, Adriaan; Audenaert, Kris; De Boevre, Marthe; Landschoot, Sofie; Bekaert, Boris; Munaut, Françoise; Eeckhout, Mia; Höfte, Monica; De Saeger, Sarah; Haesaert, Geert

2014-07-02

Global food safety depends on continuous monitoring of food contaminants such as mycotoxins in cereals and cereal-derived products. Here, we combine this type of investigation with quantitative occurrence data on Fusarium infestation of these products in extensive correlation studies. Finally, this contributes to a thorough understanding of the presence, origin and physiology of Fusarium Head Blight (FHB) related mycotoxins and the correlations within their ranks. Two hundred and thirty-seven samples were analyzed from diverse cereal matrices, representing the most important stages of the cereal food and feed chain in Belgium. Food, feed and non-processed field samples were investigated, with a strong emphasis on whole-grain food products. Two approaches were pursued to estimate the full scope of FHB and its repercussions: UPLC-MS/MS was applied to detect twelve different mycotoxins, and Q-PCR was used to measure the presence of ten Fusarium species. We found that different matrices have different characteristic contamination profiles, and extensive correlation studies identified certain mycotoxins for future assessment (e.g. moniliformin produced by the Fusarium avenaceum/Fusarium tricinctum species group). The investigated harvest year of 2012 yielded many non-processed field materials containing elevated levels of deoxynivalenol (DON), while even in a so-called DON-year less prevalent toxins such as T-2 and HT-2 might be considered problematic due to their consistent co-occurrence with related mycotoxins. Our data illustrate complex interactions between the many Fusarium species that are responsible for FHB and their mycotoxins. Correlation studies demonstrate that consistent co-occurrence of mycotoxins is not to be neglected, and pinpoint issues for future surveillance and legislation. Copyright © 2014 Elsevier B.V. All rights reserved.

Strategy for the reduction of Trichloromethane residue levels in farm bulk milk.

PubMed

Ryan, Siobhan; Gleeson, David; Jordan, Kieran; Furey, Ambrose; O'Sullivan, Kathleen; O'Brien, Bernadette

2013-05-01

High fat dairy products, such as butter and margarine can be contaminated during the milk production process with a residue called Trichloromethane (TCM), which results from the use of chlorine based detergent solutions. Although, TCM concentrations in Irish products are not at levels that are a public health issue, such contamination can cause marketing difficulties in countries to which Irish products are being exported. In an attempt to reduce such milk residues, a template procedure was developed, tried and tested on 43 farms (from 3 processing companies). This involved identifying farms with high TCM milk, applying corrective action in the form of advice and recommendations to reduce TCM and re-measuring milks from these farms. Trichloromethane in milk was measured by head-space gas chromatography with electron capture detector. The TCM reduction strategy proved successful in significantly reducing the levels in milk in the farms tested, e.g. TCM was reduced from 0.006 to the target of 0.002 mg/kg (P < 0.05). The strategy was then applied to farms who supplied milk to six Irish dairy processors with the objective of reducing TCM in those milks to a level of ≤ 0.002 mg/kg. Initially, milk tankers containing milks from approximately 10-15 individual farms were sampled and analysed and tankers with high TCM (>0.002 mg/kg) identified. Individual herd milks contributing to these tankers were subsequently sampled and analysed and farms supplying high TCM identified. Guidance and advice was provided to the high TCM milk suppliers and levels of TCM of these milk supplies were monitored subsequently. A significant reduction (minimum P < 0.05) in milk TCM was observed in 5 of the 6 dairy processor milks, while a numerical reduction in TCM was observed in the remaining processor milk.

Feasibility: An important but neglected issue in patient hand hygiene.

PubMed

Knighton, Shanina C; McDowell, Cherese; Rai, Herleen; Higgins, Patricia; Burant, Christopher; Donskey, Curtis J

2017-06-01

Patient hand hygiene may be a useful strategy to prevent acquisition of pathogens and to reduce the risk for transmission by colonized patients. Several studies demonstrate that patients and long-term-care facility (LTCF) residents may have difficulty using hand hygiene products that are provided; however, none of them measure feasibility for patients to use different hand hygiene products. A convenience sample of 42 hospitalized patients and 46 LTCF residents was assessed for their ability to use 3 hand sanitizer products (8-oz pushdown pump bottle, 2-oz pocket-sized bottle with a reclosable lid, and alcohol-impregnated hand wipes). The time (seconds) required for accessing each product was compared among acute-care patients and LTCF residents. Participants provided feedback on which product they preferred and found easiest to use. Of 88 participants, 86 (97.7%) preferred the pushdown pump, 2 (2.3%) preferred the bottle with the reclosable lid, and none preferred the hand wipes. For both hospitalized patients and LTCF residents, the average time required to access the pushdown pump was significantly less than the time required to access the other products (pushdown pump, 0.45 seconds; bottle with reclosable lid, 3.86 seconds; and wipes, 5.66 seconds; P < .001). Feasibility and ease of use should be considered in the selection of hand hygiene products for patients and LTCF residents. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Investigations on Cs-free alternatives for negative ion formation in a low pressure hydrogen discharge at ion source relevant parameters

NASA Astrophysics Data System (ADS)

Kurutz, U.; Friedl, R.; Fantz, U.

2017-07-01

Caesium (Cs) is applied in high power negative hydrogen ion sources to reduce a converter surface’s work function and thus enabling an efficient negative ion surface formation. Inherent drawbacks with the usage of this reactive alkali metal motivate the search for Cs-free alternative materials for neutral beam injection systems in fusion research. In view of a future DEMOnstration power plant, a suitable material should provide a high negative ion formation efficiency and comply with the RAMI issues of the system: reliability, availability, maintainability, inspectability. Promising candidates, like low work function materials (molybdenum doped with lanthanum (MoLa) and LaB6), as well as different non-doped and boron-doped diamond samples were investigated in this context at identical and ion source relevant parameters at the laboratory experiment HOMER. Negative ion densities were measured above the samples by means of laser photodetachment and compared with two reference cases: pure negative ion volume formation with negative ion densities of about 1× {10}15 {{{m}}}-3 and the effect of H- surface production using an in situ caesiated stainless steel sample which yields 2.5 times higher densities. Compared to pure volume production, none of the diamond samples did exhibit a measurable increase in H- densities, while showing clear indications of plasma-induced erosion. In contrast, both MoLa and LaB6 produced systematically higher densities (MoLa: ×1.60 LaB6: ×1.43). The difference to caesiation can be attributed to the higher work functions of MoLa and LaB6 which are expected to be about 3 eV for both compared to 2.1 eV of a caesiated surface.

A High-Throughput Molecular Pipeline Reveals the Diversity in Prevalence and Abundance of Pratylenchus and Meloidogyne Species in Coffee Plantations.

PubMed

Bell, Christopher A; Atkinson, Howard J; Andrade, Alan C; Nguyen, Hoa X; Swibawa, I Gede; Lilley, Catherine J; McCarthy, James; Urwin, P E

2018-05-01

Coffee yields are adversely affected by plant-parasitic nematodes and the pathogens are largely underreported because a simple and reliable identification method is not available. We describe a polymerase chain reaction-based approach to rapidly detect and quantify the major Pratylenchus and Meloidogyne nematode species that are capable of parasitizing coffee. The procedure was applied to soil samples obtained from a number of coffee farms in Brazil, Vietnam, and Indonesia to assess the prevalence of these species associated both with coffee (Coffea arabica and C. canephora) and its intercropped species Musa acuminata (banana) and Piper nigrum (black pepper). Pratylenchus coffeae and P. brachyurus were associated with coffee in all three countries but there were distinct profiles of Meloidogyne spp. Meloidogyne incognita, M. exigua, and M. paranaensis were identified in samples from Brazil and M. incognita and M. hapla were detected around the roots of coffee in Vietnam. No Meloidogyne spp. were detected in samples from Indonesia. There was a high abundance of Meloidogyne spp. in soil samples in which Pratylenchus spp. were low or not detected, suggesting that the success of one genus may deter another. Meloidogyne spp. in Vietnam and Pratylenchus spp. in Indonesia were more numerous around intercropped plants than in association with coffee. The data suggest a widespread but differential nematode problem associated with coffee production across the regions studied. The issue is compounded by the current choice of intercrops that support large nematode populations. Wider application of the approach would elucidate the true global scale of the nematode problem and the cost to coffee production. [Formula: see text] Copyright © 2018 The Author(s). This is an open access article distributed under the CC BY 4.0 International license .

Marketing environment dynamics and implications for pricing strategies: the case of home health care.

PubMed

Ponsford, B J; Barlow, D

1999-01-01

This research reviews the factors affecting the pricing or rate schedules of home health care agencies. A large number of factors affect costs and thus rate structures. The major factors include reimbursement structures with accompanying discount structures, administrative burdens, and risks. Channel issues include bargaining power, competition, and size. Staffing issues affect pricing and product through the provider level, productivity, and quality outcomes. Physician and patient issues include quality concerns and choices. These factors are discussed in light of overall marketing strategy and the interaction of pricing with other marketing controllables such as product, place/distribution, and promotion. Economic and accounting principles are also reviewed with consideration to understanding direct and indirect costs in order to enable negotiators to effectively price health care services.

Regulation of immunotherapeutic products for cancer and FDA’s role in product development and clinical evaluation

PubMed Central

2013-01-01

Immunotherapeutics include drugs and biologics that render therapeutic benefit by harnessing the power of the immune system. The promise of immune-mediated therapies is target specificity with a consequent reduction in off-target side effects. Recent scientific advances have led to clinical trials of both active and passive immunotherapeutic products that have the potential to convert life-ending diseases into chronic but manageable conditions. Clinical trials investigating immunotherapeutics are ongoing with some trials at advanced stages of development. However, as with many products involving novel mechanisms of action, major regulatory and scientific issues arising with clinical use of immunotherapeutic products remain to be addressed. In this review, we address issues related to different immunotherapeutics and provide recommendations for the characterization and evaluation of these products during various stages of product and clinical development. PMID:24764535

Enabling optical metrology on small 5×5μm2 in-cell targets to support flexible sampling and higher order overlay and CD control for advanced logic devices nodes

NASA Astrophysics Data System (ADS)

Salerno, Antonio; de la Fuente, Isabel; Hsu, Zack; Tai, Alan; Chang, Hammer; McNamara, Elliott; Cramer, Hugo; Li, Daoping

2018-03-01

In next generation Logic devices, overlay control requirements shrink to sub 2.5nm level on-product overlay. Historically on-product overlay has been defined by the overlay capability of after-develop in-scribe targets. However, due to design and dimension, the after development metrology targets are not completely representative for the final overlay of the device. In addition, they are confined to the scribe-lane area, which limits the sampling possibilities. To address these two issues, metrology on structures matching the device structure and which can be sampled with high density across the device is required. Conventional after-etch CDSEM techniques on logic devices present difficulties in discerning the layers of interest, potential destructive charging effects and finally, they are limited by the long measurement times[1] [2] [3] . All together, limit the sampling densities and making CDSEM less attractive for control applications. Optical metrology can overcome most of these limitations. Such measurement, however, does require repetitive structures. This requirement is not fulfilled by logic devices, as the features vary in pitch and CD over the exposure field. The solution is to use small targets, with a maximum pad size of 5x5um2 , which can easily be placed in the logic cell area. These targets share the process and architecture of the device features of interest, but with a modified design that replicates as close as possible the device layout, allowing for in-device metrology for both CD and Overlay. This solution enables measuring closer to the actual product feature location and, not being limited to scribe-lanes, it opens the possibility of higher-density sampling schemes across the field. In summary, these targets become the facilitator of in-device metrology (IDM), that is, enabling the measurements both in-device Overlay and the CD parameters of interest and can deliver accurate, high-throughput, dense and after-etch measurements for Logic. Overlay improvements derived from a high-densely sampled Overlay map measured with 5x5 um2 In Device Metrology (IDM) targets were investigated on a customer Logic application. In this work we present both the main design aspects of the 5x5 um2 IDM targets, as well as the results on the improved Overlay performance.

An Independent Scientific Assessment of Well Stimulation in California Volume III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Birkholzer, Jens

This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, issued in July 2015, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, this volume, presents case studies that assess environmental issues and qualitative risks for specificmore » geographic regions. The Summary Report summarizes key findings, conclusions and recommendations of all three volumes.« less

An Independent Scientific Assessment of Well Stimulation in California Volume II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Corinne E. Bachmann

This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, the present volume, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, also issued in July 2015, presents case studies that assess environmental issues and qualitative risksmore » for specific geographic regions. A final Summary Report summarizes key findings, conclusions and recommendations of all three volumes.« less

16 CFR 1210.11 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.11 General. Section 14(a) of the Consumer Product... product that is subject to a consumer product safety standard and that is distributed in commerce to issue...

Ethical issues in the export, storage and reuse of human biological samples in biomedical research: perspectives of key stakeholders in Ghana and Kenya.

PubMed

Tindana, Paulina; Molyneux, Catherine S; Bull, Susan; Parker, Michael

2014-10-18

For many decades, access to human biological samples, such as cells, tissues, organs, blood, and sub-cellular materials such as DNA, for use in biomedical research, has been central in understanding the nature and transmission of diseases across the globe. However, the limitations of current ethical and regulatory frameworks in sub-Saharan Africa to govern the collection, export, storage and reuse of these samples have resulted in inconsistencies in practice and a number of ethical concerns for sample donors, researchers and research ethics committees. This paper examines stakeholders' perspectives of and responses to the ethical issues arising from these research practices. We employed a qualitative strategy of inquiry for this research including in-depth interviews and focus group discussions with key research stakeholders in Kenya (Nairobi and Kilifi), and Ghana (Accra and Navrongo). The stakeholders interviewed emphasised the compelling scientific importance of sample export, storage and reuse, and acknowledged the existence of some structures governing these research practices, but they also highlighted the pressing need for a number of practical ethical concerns to be addressed in order to ensure high standards of practice and to maintain public confidence in international research collaborations. These concerns relate to obtaining culturally appropriate consent for sample export and reuse, understanding cultural sensitivities around the use of blood samples, facilitating a degree of local control of samples and sustainable scientific capacity building. Drawing on these findings and existing literature, we argue that the ethical issues arising in practice need to be understood in the context of the interactions between host research institutions and local communities and between collaborating institutions. We propose a set of 'key points-to-consider' for research institutions, ethics committees and funding agencies to address these issues.

Operationalizing Space Weather Products - Process and Issues

NASA Astrophysics Data System (ADS)

Scro, K. D.; Quigley, S.

2006-12-01

Developing and transitioning operational products for any customer base is a complicated process. This is the case for operational space weather products and services for the USAF. This presentation will provide information on the current state of affairs regarding the process required to take an idea from the research field to the real-time application of 24-hour space weather operations support. General principles and specific issues are discussed and will include: customer requirements, organizations in-play, funding, product types, acquisition of engineering and validation data, security classification, version control, and various important changes that occur during the process. The author's viewpoint is as an individual developing space environmental system-impact products for the US Air Force: 1) as a member of its primary research organization (Air Force Research Laboratory), 2) working with its primary space environment technology transition organization (Technology Application Division of the Space and Missile Systems Center, SMC/WXT), and 3) delivering to the primary sponsor/customer of such system-impact products (Air Force Space Command). The experience and focus is obviously on specific military operationalization process and issues, but most of the paradigm may apply to other (commercial) enterprises as well.

Perceptions of Geography Students in the USA and Egypt on Global Issues

ERIC Educational Resources Information Center

Saleh, Edrees Sultan; Gandy, S. Kay

2015-01-01

The study aimed to compare the perceptions of Egyptian and US students on global issues. The authors developed a survey of global issues and administered it to sample of 321 Geography students in the USA and Egypt. The survey tapped five issues: global citizenship, cultural diversity, global conflicts, nuclear arms race, and global warming. The…

14 CFR 21.257 - Type certificates: issue.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Type certificates: issue. 21.257 Section 21.257 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... certificates: issue. An applicant is entitled to a type certificate for a product manufactured under a...

14 CFR 21.257 - Type certificates: issue.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Type certificates: issue. 21.257 Section 21.257 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... certificates: issue. An applicant is entitled to a type certificate for a product manufactured under a...

14 CFR 21.187 - Issue of multiple airworthiness certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of multiple airworthiness certification. 21.187 Section 21.187 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Airworthiness Certificates § 21.187 Issue...

Exceptional Parent, 1996.

ERIC Educational Resources Information Center

Klein, Stanley, Ed.

1996-01-01

Twelve 1996 issues of "Exceptional Parent" magazine provide a variety of articles and resources on parenting the child or young adult with a disability. The January issue is a resource guide, with directories of national organizations, associations, products, and services. The February issue focuses on early childhood, including articles…

Quality of herbal medicines: challenges and solutions.

PubMed

Zhang, Junhua; Wider, Barbara; Shang, Hongcai; Li, Xuemei; Ernst, Edzard

2012-01-01

The popularity of herbal medicines has risen worldwide. This increase in usage renders safety issues important. Many adverse events of herbal medicines can be attributed to the poor quality of the raw materials or the finished products. Different types of herbal medicines are associated with different problems. Quality issues of herbal medicines can be classified into two categories: external and internal. In this review, external issues including contamination (e.g. toxic metals, pesticides residues and microbes), adulteration and misidentification are detailed. Complexity and non-uniformity of the ingredients in herbal medicines are the internal issues affecting the quality of herbal medicines. Solutions to the raised problems are discussed. The rigorous implementation of Good Agricultural and Collection Practices (GACP) and Good Manufacturing Practices (GMP) would undoubtedly reduce the risk of external issues. Through the use of modern analytical methods and pharmaceutical techniques, previously unsolved internal issues have become solvable. Standard herbal products can be manufactured from the standard herbal extracts. Copyright © 2011 Elsevier Ltd. All rights reserved.

Microfluidic-Based sample chips for radioactive solutions

DOE PAGES

Tripp, J. L.; Law, J. D.; Smith, T. E.; ...

2015-01-01

Historical nuclear fuel cycle process sampling techniques required sample volumes ranging in the tens of milliliters. The radiation levels experienced by analytical personnel and equipment, in addition to the waste volumes generated from analysis of these samples, have been significant. These sample volumes also impacted accountability inventories of required analytes during process operations. To mitigate radiation dose and other issues associated with the historically larger sample volumes, a microcapillary sample chip was chosen for further investigation. The ability to obtain microliter volume samples coupled with a remote automated means of sample loading, tracking, and transporting to the analytical instrument wouldmore » greatly improve analytical efficiency while reducing both personnel exposure and radioactive waste volumes. Sample chip testing was completed to determine the accuracy, repeatability, and issues associated with the use of microfluidic sample chips used to supply µL sample volumes of lanthanide analytes dissolved in nitric acid for introduction to an analytical instrument for elemental analysis.« less

The Opinions of Middle School Mathematics Teachers on the Integration of Mathematics Course and Social Issues

ERIC Educational Resources Information Center

Turhan Turkkan, Buket; Karakus, Memet

2018-01-01

The purpose of this study is to examine the opinions of middle school mathematics teachers on the integration of mathematics course and social issues. For this purpose, qualitative research method was used in this study. As for determining the participants of the research, criterion sampling among purposeful sampling methods was used. Being a…

Identification of Cellulose Breaking Bacteria in Landfill Samples for Organic Waste Management

NASA Astrophysics Data System (ADS)

Chan, P. M.; Leung, F. C.

2015-12-01

According to the Hong Kong Environmental Protection Department, the citizens of Hong Kong disposes 13,500 tonnes of waste to the landfill everyday. Out of the 13,500 tonnes, 3600 tonnes consist of organic waste. Furthermore, due to the limited supply of land for landfills in Hong Kong, it is estimated that landfills will be full by about 2020. Currently, organic wastes at landfills undergo anaerobic respiration, where methane gas, one of the most harmful green house gases, will be released. The management of such waste is a pressing issue, as possible solutions must be presented in this crucial period of time. The Independent Schools Foundation Academy introduced their very own method to manage the waste produced by the students. With an approximate of 1500 students on campus, the school produces 27 metric tonnes of food waste each academic year. The installation of the rocket food composter provides an alternate method of disposable of organic waste the school produces, for the aerobic environment allows for different by-products to be produced, namely compost that can be used for organic farming by the primary school students and subsequently carbon dioxide, a less harmful greenhouse gas. This research is an extension on the current work, as another natural factor is considered. It evaluates the microorganism community present in leachate samples collected from the North East New Territories Landfill, for the bacteria in the area exhibits special characteristics in the process of decomposition. Through the sequencing and analysis of the genome of the bacteria, the identification of the bacteria might lead to a break through on the current issue. Some bacteria demonstrate the ability to degrade lignin cellulose, or assist in the production of methane gas in aerobic respirations. These characteristics can hopefully be utilized in the future in waste managements across the globe.

Addressing incontinence for people with dementia living at home: a documentary analysis of local English community nursing service continence policies and clinical guidance.

PubMed

Drennan, Vari M; Norrie, Caroline; Cole, Laura; Donovan, Sheila

2013-02-01

To establish whether the problems and issues experienced by people with dementia living at home and their carers were addressed in the clinical guidance for continence management for community nursing services in England. Internationally, the numbers of people with dementia are rising. Managing incontinence is a significant issue as the presence of incontinence is one of the triggers for people with dementia to move their residence to a care home. People with dementia living at home and their family carers report difficulties in accessing knowledgeable professionals and acceptable continence products. A review by documentary analysis of clinical policies and guidance from a sample of community nursing services in all Strategic Health Authority regions of England. A sample of clinical policy and guidance documents for continence assessment and management from up to four community nursing services in each of the ten Strategic Health Authority regions in England was sought. Documentary analysis was undertaken on the relevance of the documents identified for people with dementia living at home. Ninety-eight documents from 38 local community nursing services spread across ten Strategic Health Authority areas were obtained and analysed. Only in the documents of three services were nurses offered detailed guidance about the management of incontinence for people with dementia at home. In the documentation of only one service were people with dementia identified as a special case which warranted the provision of additional continence products. Clinical guidance on continence assessment and management for community nurses in many parts of England does not address the specific needs of people with dementia living at home or their carers. Nurses working in community settings and those providing clinical leadership in continence care should review their clinical guidance and policies to ensure relevance for people with dementia living at home and their family carers. © 2012 Blackwell Publishing Ltd.

Recent status of resist outgas testing for metal containing resists at EIDEC

NASA Astrophysics Data System (ADS)

Shiobara, Eishi; Mikami, Shinji; Yamada, Kenji

2018-03-01

The metal containing resist is one of the strong candidates for high lithographic performance Extreme Ultraviolet (EUV) resists. EIDEC has prepared the infrastructure for outgas testing in hydrogen environment for metal containing resists at High Power EUV irradiation tool (HPEUV). We have experimentally obtained the preliminary results of the non-cleanable metal contamination on witness sample using model material by HPEUV [1]. The metal contamination was observed at only the condition of hydrogen environment. It suggested the generation of volatile metal hydrides by hydrogen radicals. Additionally, the metal contamination on a witness sample covered with Ru was not removed by hydrogen radical cleaning. The strong interaction between the metal hydride and Ru was confirmed by the absorption simulation [2]. Recently, ASML announced a resist outgassing barrier technology using Dynamic Gas Lock (DGL) membrane located between projection optics and wafer stage [3, 4]. DGL membrane blocks the diffusion of all kinds of resist outgassing to the projection optics and prevents the reflectivity loss of EUV mirrors. The investigation of DGL membrane for high volume manufacturing is just going on. It extends the limitation of material design for EUV resists. However, the DGL membrane has an impact for the productivity of EUV scanners due to the transmission loss of EUV light and the necessity of periodic maintenance. The well understanding and control of the outgassing characteristics of metal containing resists may help to improve the productivity of EUV scanner. We consider the outgas evaluation for the resists still useful. For the improvement of resist outgas testing in hydrogen, there are some issues such as the contamination limited regime, the optimization of exposure dose to obtain the measurable contamination film thickness and the detection of minimum amount of metal related outgas species generated. We are considering a new platform of outgas testing for metal containing resists based on the electron-beam irradiation system as one of the solutions for these issues. The concept is presented in this paper.

Guide for preparing annual reports on radiation-safety testing of electronic products (general)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

For manufacturers of electronic products other than those for which a specific guide has been issued, the guide replaces the Guide for the Filing of Annual Reports (21 CFR Subchapter J, Section 1002.11), HHS Publication FDA 82-8127. The electronic product (general) annual reporting guide is applicable to the following products: products intended to produce x radiation (accelerators, analytical devices, therapy x-ray machines); microwave diathermy machines; cold-cathode discharge tubes; and vacuum switches and tubes operating at or above 15,000 volts. To carry out its responsibilities under Public Law 90-602, the Food and Drug Administration's Center for Devices and Radiological Health (CDRH)more » has issued a series of regulations contained in Title 21 of the Code of Federal Regulations (CFR). Part 1002 of 21 CFR deals with records and reports. Section 1002.61 categorizes electronic products into Groups A through C. Section 1002.30 requires manufacturers of products in Groups B and C to establish and maintain certain records, while Section 1002.11 requires such manufacturers to submit an Annual Report summarizing the contents of the required records. Section 1002.7 requires that reports conform to reporting guides issued by CDRH unless an acceptable justification for an alternate format is provided.« less

9 CFR 104.4 - Products for research and evaluation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... BIOLOGICAL PRODUCTS § 104.4 Products for research and evaluation. (a) An application for a U.S. Veterinary Biological Product Permit to import a biological product for research and evaluation shall be accompanied by... a biological product for research and evaluation shall not be issued unless the scientific...

9 CFR 104.4 - Products for research and evaluation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... BIOLOGICAL PRODUCTS § 104.4 Products for research and evaluation. (a) An application for a U.S. Veterinary Biological Product Permit to import a biological product for research and evaluation shall be accompanied by... a biological product for research and evaluation shall not be issued unless the scientific...

7 CFR 58.56 - Incubation of product samples.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Incubation of product samples. 58.56 Section 58.56 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Packaging Products with Official Identification § 58.56 Incubation of product samples. (a) Samples of...

7 CFR 58.56 - Incubation of product samples.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Incubation of product samples. 58.56 Section 58.56 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Packaging Products with Official Identification § 58.56 Incubation of product samples. (a) Samples of...

7 CFR 58.56 - Incubation of product samples.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Incubation of product samples. 58.56 Section 58.56 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Packaging Products with Official Identification § 58.56 Incubation of product samples. (a) Samples of...

7 CFR 58.56 - Incubation of product samples.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Incubation of product samples. 58.56 Section 58.56 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Packaging Products with Official Identification § 58.56 Incubation of product samples. (a) Samples of...

7 CFR 58.56 - Incubation of product samples.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Incubation of product samples. 58.56 Section 58.56 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Packaging Products with Official Identification § 58.56 Incubation of product samples. (a) Samples of...

Editorial: from plant biotechnology to bio-based products.

PubMed

Stöger, Eva

2013-10-01

From plant biotechnology to bio-based products - this Special Issue of Biotechnology Journal is dedicated to plant biotechnology and is edited by Prof. Eva Stöger (University of Natural Resources and Life Sciences, Vienna, Austria). The Special Issue covers a wide range of topics in plant biotechnology, including metabolic engineering of biosynthesis pathways in plants; taking advantage of the scalability of the plant system for the production of innovative materials; as well as the regulatory challenges and society acceptance of plant biotechnology. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Product qualification: a barrier to point-of-care microfluidic-based diagnostics?

PubMed

Tantra, Ratna; van Heeren, Henne

2013-06-21

One of the most exciting applications of microfluidics-based diagnostics is its potential use in next generation point-of-care (POC) devices. Many prototypes are already in existence, but, as of yet, few have achieved commercialisation. In this article, we consider the issue surrounding product qualification as a potential barrier to market success. The study discusses, in the context of POC microfluidics-based diagnostics, what the generic issues are and potential solutions. Our findings underline the need for a community-based effort that is necessary to speed up the product qualification process.

Economic tools for realization of methane production project on Kuzbass coal deposits

NASA Astrophysics Data System (ADS)

Sharf, I.; Sokolova, M.; Kochetkova, O.; Dmitrieva, N.

2016-09-01

Environmental issues and, above all, issues related to the release of greenhouse gases into the atmosphere, such as coal bed methane, actualize the challenge of searching a variety of options for its disposal. The difference in the macroeconomic, industrial, geological and infrastructural features determine the need to choose the most cost-effective option for using of methane emitted from the coal deposits. Various economic ways to improve the profitability of production are viewed on the basis of the analysis of methane production project from Kuzbass coal deposits, Kemerovo region, Russia.

9 CFR 102.5 - U.S. Veterinary Biological Product License.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false U.S. Veterinary Biological Product... BIOLOGICAL PRODUCTS § 102.5 U.S. Veterinary Biological Product License. (a) Authorization to produce each biological product shall be specified on a U.S. Veterinary Biological Product License, issued by the...

9 CFR 102.5 - U.S. Veterinary Biological Product License.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false U.S. Veterinary Biological Product... BIOLOGICAL PRODUCTS § 102.5 U.S. Veterinary Biological Product License. (a) Authorization to produce each biological product shall be specified on a U.S. Veterinary Biological Product License, issued by the...

Vaccines against seasonal and pandemic influenza and the implications of changes in substrates for virus production.

PubMed

Minor, Philip D

2010-02-15

Influenza virus changes constantly, making vaccine production challenging. Changing the growth substrate from eggs to cell culture raises issues at all stages of the process, from surveillance to the assay of vaccines. The pandemic threat-first H5N1, then H1N1-encouraged a review of methods and brought issues into sharp relief.

75 FR 34750 - Web-Based Public Meeting To Discuss Issues Related to the Development of an Enforcement Action...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-18

... help FDA in developing an enforcement action plan. FDA is seeking input on a number of specific issues... generally and to reduce tobacco use by minors. Tobacco products are responsible for more than 440,000 deaths... other things, that the use of tobacco products by children is a pediatric disease and virtually all new...

National Response Plan

DTIC Science & Technology

2004-12-01

statutory authority for all domestic and imported food except meat , poultry , and egg products, which are under the authority of the USDA/Food Safety...Federal agencies (e.g., USDA). (Note: HHS, through the FDA, has statutory authority for all domestic and imported food except meat , poultry , and egg ...wildlife issues in disease and natural disaster issues Inspection and verification of meat , poultry , and egg products in affected areas Food

Questions, Instructions, and Modes of Listening in the Joint Production of Guided Action: A Study of Student-Teacher Collaboration in Handicraft Education

ERIC Educational Resources Information Center

Ekstrom, Anna; Lindwall, Oskar; Saljo, Roger

2009-01-01

This article concerns a central issue in education as an institutional activity: instructions and their role in guiding student activities and understanding. In the study, we investigate the tensions between specifics and generalities in the joint production of guided action. This issue is explored in the context of handicraft education--or more…

Sampling populations of humans across the world: ELSI issues.

PubMed

Knoppers, Bartha Maria; Zawati, Ma'n H; Kirby, Emily S

2012-01-01

There are an increasing number of population studies collecting data and samples to illuminate gene-environment contributions to disease risk and health. The rising affordability of innovative technologies capable of generating large amounts of data helps achieve statistical power and has paved the way for new international research collaborations. Most data and sample collections can be grouped into longitudinal, disease-specific, or residual tissue biobanks, with accompanying ethical, legal, and social issues (ELSI). Issues pertaining to consent, confidentiality, and oversight cannot be examined using a one-size-fits-all approach-the particularities of each biobank must be taken into account. It remains to be seen whether current governance approaches will be adequate to handle the impact of next-generation sequencing technologies on communication with participants in population biobanking studies.

Editorial for Special Issue on Herbal Medicines and Natural Products.

PubMed

Zhou, Zhi-Wei; Zhou, Shu-Feng

2015-11-16

Herbal medicines and natural products have been the most productive source of drug development and there is a large line of evidence on the applications of herbal medicines and natural products for the management of body function and the treatment of aliments. The multiple bioactive components in herbal medicines and natural products can explain the multiple targets effect in their medical applications. The increasing usage of state-of-art computational, molecular biological, and analytical chemistry techniques will promote the exploration of the pharmacological effect of previously inaccessible sources of herbal medicines and natural products. Notably, with the increasing reports on the safety issues regarding the medical use of herbal medicines and natural products, the awareness of pharmacovigilance in herbal medicines and natural products needs to be strengthened. To prevent the adverse drug reactions related to herbal medicines and natural products, physicians need to be aware of potential risks and alert patients in the use of herbal medicines and natural products.

Child toy safety: An interdisciplinary approach to unravel the microbiological hazard posed by soap bubbles.

PubMed

Amoruso, Irene; Bertoncello, Chiara; Caravello, Gianumberto; Giaccone, Valerio; Baldovin, Tatjana

2015-11-01

In 2012 some children developed sepsis after playing together with a soap bubble toy. Microbiological testing revealed heavy contamination of the soap solution, which reasonably represented the vehicle of infection. We investigated the issue with a multidisciplinary approach: review of toy safety legislation; microbiological testing of additional samples; query of the RAPEX database for non-compliant soap bubbles; identification of major manufacturing districts. Microbiological contamination of industrial soap bubbles was widespread. Sixty-three notifications of batches contaminated by environmental microorganisms and opportunistic pathogens had been reported. The Chinese had a virtual monopoly of the soap bubble market. We identified two main manufacturing districts in Guangdong Province, both notable for degradation of their water resources. The use of untreated water for the industrial production of soap bubbles may explain the bacterial contamination. Existing legislation provides an unsatisfactory approach for managing microbiological hazards in sensitive toy categories and for identifying responsible parties in import and export of the products.

14 CFR 21.117 - Issue of supplemental type certificates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Issue of supplemental type certificates. 21.117 Section 21.117 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Supplemental Type Certificates § 21.117 Issue of...

14 CFR 21.117 - Issue of supplemental type certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of supplemental type certificates. 21.117 Section 21.117 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Supplemental Type Certificates § 21.117 Issue of...

14 CFR 21.117 - Issue of supplemental type certificates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Issue of supplemental type certificates. 21.117 Section 21.117 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Supplemental Type Certificates § 21.117 Issue of...

14 CFR 21.117 - Issue of supplemental type certificates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Issue of supplemental type certificates. 21.117 Section 21.117 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Supplemental Type Certificates § 21.117 Issue of...

14 CFR 21.199 - Issue of special flight permits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of special flight permits. 21.199 Section 21.199 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Airworthiness Certificates § 21.199 Issue of...

Evaluation of an attributive measurement system in the automotive industry

NASA Astrophysics Data System (ADS)

Simion, C.

2016-08-01

Measurement System Analysis (MSA) is a critical component for any quality improvement process. MSA is defined as an experimental and mathematical method of determining how much the variation within the measurement process contributes to overall process variability and it falls into two categories: attribute and variable. Most problematic measurement system issues come from measuring attribute data, which are usually the result of human judgment (visual inspection). Because attributive measurement systems are often used in some manufacturing processes, their assessment is important to obtain the confidence in the inspection process, to see where are the problems in order to eliminate them and to guide the process improvement. It was the aim of this paper to address such a issue presenting a case study made in a local company from the Sibiu region supplying products for the automotive industry, specifically the bag (a technical textile component, i.e. the fabric) for the airbag module. Because defects are inherent in every manufacturing process and in the field of airbag systems a minor defect can influence their performance and lives depend on the safety feature, there is a stringent visual inspection required on the defects of the bag material. The purpose of this attribute MSA was: to determine if all inspectors use the same criteria to determine “pass” from “fail” product (i.e. the fabric); to assess company inspection standards against customer's requirements; to determine how well inspectors are conforming to themselves; to identify how inspectors are conforming to a “known master,” which includes: how often operators ship defective product, how often operators dispose of acceptable product; to discover areas where training is required, procedures must be developed and standards are not available. The results were analyzed using MINITAB software with its module called Attribute Agreement Analysis. The conclusion was that the inspection process must be improved by operator training, developing visual aids/boundary samples, establishing standards and set-up procedures.

Analysis of federal and state policies and environmental issues for bioethanol production facilities.

PubMed

McGee, Chandra; Chan Hilton, Amy B

2011-03-01

The purpose of this work was to investigate incentives and barriers to fuel ethanol production from biomass in the U.S. during the past decade (2000-2010). In particular, we examine the results of policies and economic conditions during this period by way of cellulosic ethanol activity in four selected states with the potential to produce different types of feedstocks (i.e., sugar, starch, and cellulosic crops) for ethanol production (Florida, California, Hawaii, and Iowa). Two of the four states, Iowa and California, currently have commercial ethanol production facilities in operation using corn feedstocks. While several companies have proposed commercial scale facilities in Florida and Hawaii, none are operating to date. Federal and state policies and incentives, potential for feedstock production and conversion to ethanol and associated potential environmental impacts, and environmental regulatory conditions among the states were investigated. Additionally, an analysis of proposed and operational ethanol production facilities provided evidence that a combination of these policies and incentives along with the ability to address environmental issues and regulatory environment and positive economic conditions all impact ethanol production. The 2000-2010 decade saw the rise of the promise of cellulosic ethanol. Federal and state policies were enacted to increase ethanol production. Since the initial push for development, expansion of cellulosic ethanol production has not happened as quickly as predicted. Government and private funding supported the development of ethanol production facilities, which peaked and then declined by the end of the decade. Although there are technical issues that remain to be solved to more efficiently convert cellulosic material to ethanol while reducing environmental impacts, the largest barriers to increasing ethanol production appear to be related to government policies, economics, and logistical issues. The numerous federal and state policies do not effectively give investors confidence to commit to the construction and long-term operation of facilities under current economic conditions. Additional changes in policy and breakthroughs in technology and logistics will be required to address these hurdles to increases in ethanol production in the U.S. in the next decade.

[Batch release of immunoglobulin and monoclonal antibody products].

PubMed

Gross, S

2014-10-01

The Paul-Ehrlich Institute (PEI) is an independent institution of the Federal Republic of Germany responsible for performing official experimental batch testing of sera. The institute decides about the release of each batch and performs experimental research in the field. The experimental quality control ensures the potency of the product and also the absence of harmful impurities. For release of an immunoglobulin batch the marketing authorization holder has to submit the documentation of the manufacture and the results of quality control measures together with samples of the batch to the PEI. Experimental testing is performed according to the approved specifications regarding the efficacy and safety. Since implementation of the 15th German drug law amendment, the source of antibody is not defined anymore. According to § 32 German drug law, all batches of sera need to be released by an official control laboratory. Sera are medicinal products, which contain antibodies, antibody fragments or fusion proteins with a functional antibody portion. Therefore, all batches of monoclonal antibodies and derivatives must also be released by the PEI and the marketing authorization holder has to submit a batch release application. Under certain circumstances a waiver for certain products can be issued with regard to batch release. The conditions for such a waiver apply to the majority of monoclonal antibodies.

Young consumers' considerations of healthy working conditions in purchasing decisions: a qualitative examination.

PubMed

Dixon, Shane M; Nordvall, Anna-Carin; Cukier, Wendy; Neumann, W Patrick

2017-05-01

Research has suggested that products manufactured under healthy work conditions (HWC) may provide a marketing advantage to companies. This paper explores young consumers' considerations of HWC in purchasing decisions using data from qualitative interviews with a sample of 21 university students. The results suggest that interviewees frequently considered the working conditions of those who produced the products they purchased. Participants reported a willingness to pay 17.5% more on a $100 product if it were produced under HWC compared to not. Their ability and willingness to act on this issue was, however, hampered by  a lack of credible information about working conditions in production, the limited availability of HWC goods and a presumed higher price of HWC goods. While caution should be applied when generalising from this targetable market segment to a general population, these results provide actionable direction for companies interested in using a HWC brand image to gain a strategic sales advantage. Practitioner Summary: This interview study shows that young consumers are interested in, and willing to pay a premium for, goods made under healthy working conditions (HWC). Reported barriers to acting on this impulse include a lack of credible information on working conditions. Ergonomics can help provide a strategic marketing advantage for companies.

Alcohol and tobacco advertising in black and general audience newspapers: targeting with message cues?

PubMed

Cohen, Elisia L; Caburnay, Charlene A; Rodgers, Shelly

2011-07-01

This study content analyzed 928 tobacco- and alcohol-related advertisements from a 3-year national sample of Black (n = 24) and general audience (n = 11) newspapers from 24 U.S. cities. The authors compared the frequency of tobacco and alcohol product and control advertising in Black versus general audience newspapers, as well as the presence of 5 message cues: model ethnicity, presence of health official, referral to resources, personal behavior mobilization, and localization. Results within health issues show that Black newspapers had more alcohol product advertising than did general audience newspapers. In contrast, Black newspapers had less alcohol and tobacco control advertising than general audience newspapers. Black newspapers' tobacco/alcohol product advertisements had more African American models than did general audience newspapers' tobacco/alcohol advertising, whereas general audience newspapers' tobacco control advertisements were significantly more likely to feature public health officials than ads in Black newspapers. Fewer message cues such as personal behavior mobilization, referral to resources, and localization were present in Black versus general audience newspapers. Results suggest that Black newspapers may have greater dependency than do general audience newspapers on these risk-related advertisements that target African American consumers. Given the current advertising environment, public health initiatives are needed to counter unhealthy alcohol product advertising messages that target vulnerable populations.

Total Mercury, Methylmercury, Methylmercury Production Potential, and Ancillary Streambed-Sediment and Pore-Water Data for Selected Streams in Oregon, Wisconsin, and Florida, 2003-04

USGS Publications Warehouse

Marvin-DiPasquale, Mark C.; Lutz, Michelle A.; Krabbenhoft, David P.; Aiken, George R.; Orem, William H.; Hall, Britt D.; DeWild, John F.; Brigham, Mark E.

2008-01-01

Mercury contamination of aquatic ecosystems is an issue of national concern, affecting both wildlife and human health. Detailed information on mercury cycling and food-web bioaccumulation in stream settings and the factors that control these processes is currently limited. In response, the U.S. Geological Survey (USGS) National Water-Quality Assessment Program (NAWQA) conducted detailed studies from 2002 to 2006 on various media to enhance process-level understanding of mercury contamination, biogeochemical cycling, and trophic transfer. Eight streams were sampled for this study: two streams in Oregon, and three streams each in Wisconsin and Florida. Streambed-sediment and pore-water samples were collected between February 2003 and September 2004. This report summarizes the suite of geochemical and microbial constituents measured, the analytical methods used, and provides the raw data in electronic form for both bed-sediment and pore-water media associated with this study.

Understanding public perception of hydraulic fracturing: a case study in Spain.

PubMed

Costa, D; Pereira, V; Góis, J; Danko, A; Fiúza, A

2017-12-15

Public acceptance is crucial for the implementation of energy technologies. Hydraulic fracturing is a technology widely used in the USA for natural gas production from shale formations, but currently finds strong public opposition worldwide, especially in Europe. Shale gas exploitation and exploration have the potential to significantly reduce import dependency in several countries, including Spain. To better understand public opinion on this issue, this article reports a survey targeting both the entire Spanish population and the inhabitants of the province of Burgos, the location where shale gas exploration permits have already been issued. Results demonstrate that half of the Spanish population opposes shale gas, and this opposition increases in autonomous communities that are closer to possible exploration sites. The results also show that socio-demographic aspects are not strong predictors of opposition. In addition, Burgos' population show different behaviours toward shale gas that demonstrates that proximity and prospect of shale gas development affects opinion. Finally, there is still a great level of unfamiliarity with high volume hydraulic fracturing and shale gas in both populations sampled. Copyright © 2017 Elsevier Ltd. All rights reserved.

7 CFR 94.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Surveillance sample. This is a 100 gram sample for Salmonella analysis that is drawn by the USDA egg product... analyze for Salmonella in egg products. Unofficial sample. These samples of egg products are drawn by...

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

PubMed

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Immunoassay as an analytical tool in agricultural biotechnology.

PubMed

Grothaus, G David; Bandla, Murali; Currier, Thomas; Giroux, Randal; Jenkins, G Ronald; Lipp, Markus; Shan, Guomin; Stave, James W; Pantella, Virginia

2006-01-01

Immunoassays for biotechnology engineered proteins are used by AgBiotech companies at numerous points in product development and by feed and food suppliers for compliance and contractual purposes. Although AgBiotech companies use the technology during product development and seed production, other stakeholders from the food and feed supply chains, such as commodity, food, and feed companies, as well as third-party diagnostic testing companies, also rely on immunoassays for a number of purposes. The primary use of immunoassays is to verify the presence or absence of genetically modified (GM) material in a product or to quantify the amount of GM material present in a product. This article describes the fundamental elements of GM analysis using immunoassays and especially its application to the testing of grains. The 2 most commonly used formats are lateral flow devices (LFD) and plate-based enzyme-linked immunosorbent assays (ELISA). The main applications of both formats are discussed in general, and the benefits and drawbacks are discussed in detail. The document highlights the many areas to which attention must be paid in order to produce reliable test results. These include sample preparation, method validation, choice of appropriate reference materials, and biological and instrumental sources of error. The article also discusses issues related to the analysis of different matrixes and the effects they may have on the accuracy of the immunoassays.

Impact of a product-specific reference standard for the measurement of a PEGylated rFVIII activity: the Swiss Multicentre Field Study.

PubMed

Bulla, O; Poncet, A; Alberio, L; Asmis, L M; Gähler, A; Graf, L; Nagler, M; Studt, J-D; Tsakiris, D A; Fontana, P

2017-07-01

Measuring factor VIII (FVIII) activity can be challenging when it has been modified, such as when FVIII is pegylated to increase its circulating half-life. Use of a product-specific reference standard may help avoid this issue. Evaluate the impact of using a product-specific reference standard for measuring the FVIII activity of BAX 855 - a pegylated FVIII - in eight of Switzerland's main laboratories. Factor VIII-deficient plasma, spiked with five different concentrations of BAX 855, plus a control FVIII sample, was sent to the participating laboratories. They measured FVIII activity by using either with a one-stage (OSA) or the chromogenic assay (CA) against their local or a product-specific reference standard. When using a local reference standard, there was an overestimation of BAX 855 activity compared to the target concentrations, both with the OSA and CA. The use of a product-specific reference standard reduced this effect: mean recovery ranged from 127.7% to 213.5% using the OSA with local reference standards, compared to 110% to 183.8% with a product-specific reference standard, and from 146.3% to 182.4% using the CA with local reference standards compared to 72.7% to 103.7% with a product-specific reference standard. In this in vitro study, the type of reference standard had a major impact on the measurement of BAX 855 activity. Evaluation was more accurate and precise when using a product-specific reference standard. © 2017 John Wiley & Sons Ltd.

Qualitative research on the attitudes toward teenage sexual behavior of Chinese British families: methodological issues.

PubMed

Yu, Juping

2009-04-01

Qualitative approaches have been increasingly used to explore ethnic differences in teenage sexual behavior, and methodological issues of conducting such research often remain unaddressed. This article discusses issues related to sampling, rapport, language, and ethnical considerations arising while undertaking research on attitudes toward teenage sexual behavior held by Chinese British families. It highlights the value of using snowball sampling, the importance of establishing rapport, and some advantages of matching the ethnic background between researcher and participants. The researcher's gender and social and cultural backgrounds affect research processes and findings, and this itself merits further reflection.

Findings

MedlinePlus

... Issue All Issues Explore Findings by Topic Cell Biology Cellular Structures, Functions, Processes, Imaging, Stress Response Chemistry ... Glycobiology, Synthesis, Natural Products, Chemical Reactions Computers in Biology Bioinformatics, Modeling, Systems Biology, Data Visualization Diseases Cancer, ...

Water resources of Hot Springs County, Wyoming

USGS Publications Warehouse

Plafcan, Maria; Ogle, Kathy Muller

1994-01-01

The wells and springs inventoried in Hot Springs County most commonly had been completed in or issued from the Quaternary alluvium, Quaternary terrace deposits, Fort Union and Mesaverde Formations, Cody Shale, and the Frontier and Chugwater Formations. The largest discharges measured were from the Quaternary terrace deposits (400 gallons per minute) and the Phosphoria Formation (1,000 gallons per minute). Discharges from all other geologic units varied, but most wells and springs yielded 50 gallons per minute or less.Water-quality samples collected from springs that issued from the Absaroka Volcanic Supergroup, the Bighorn Dolomite, and the Flathead Sandstone had the lowest dissolved-solids concentrations, which ranged from 58 to 265 milligrams per liter, and the least variable water types. Water from the volcanic rocks was a sodium bicarbonate type; whereas, water from the Flathead Sandstone was a calcium bicarbonate type. Water types for all the other aquifers varied from sampling site to sampling site; however, water samples from the Fort Union Formation and the Cody Shale were consistently of the sodium sulfate type. The effect of oil- and gas-development at Hamilton Dome on thermal spring discharges at Hot Springs State Park near Thermopolis was studied. The estimated drawdown from 1918, when the Hamilton Dome oil field was discovered, to 1988 was made using drill-stem data from previous studies. Drawdown at Big Spring in the Park was estimated to be less than 3 feet on the basis of recent oil- and water-production data, previous modeling studies, and the estimated water-level drawdown of 330 feet in wells at the Hamilton Dome oil field.Streams originating in the Plains region of the county, such as Middle Fork Owl Creek, are ephemeral or intermittent; whereas, streams originating in the mountains, such as Gooseberry Creek, are perennial. Average annual runoff across the county ranges from 0.26 inches at a representative streamflow-gaging station near Worland in the plains region to 5.4 inches in the Owl Creek Mountains and southeastern Absaroka Range.

36 CFR 223.242 - Supplemental guidance, Memorandum of Agreements and Memorandums of Understanding.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Special Forest Products Award of Contracts, Permits... collaboration, issue resolution, and local implementation of these regulations. Existing Memorandums of...

Updating a synchronous fluorescence spectroscopic virgin olive oil adulteration calibration to a new geographical region.

PubMed

Kunz, Matthew Ross; Ottaway, Joshua; Kalivas, John H; Georgiou, Constantinos A; Mousdis, George A

2011-02-23

Detecting and quantifying extra virgin olive adulteration is of great importance to the olive oil industry. Many spectroscopic methods in conjunction with multivariate analysis have been used to solve these issues. However, successes to date are limited as calibration models are built to a specific set of geographical regions, growing seasons, cultivars, and oil extraction methods (the composite primary condition). Samples from new geographical regions, growing seasons, etc. (secondary conditions) are not always correctly predicted by the primary model due to different olive oil and/or adulterant compositions stemming from secondary conditions not matching the primary conditions. Three Tikhonov regularization (TR) variants are used in this paper to allow adulterant (sunflower oil) concentration predictions in samples from geographical regions not part of the original primary calibration domain. Of the three TR variants, ridge regression with an additional 2-norm penalty provides the smallest validation sample prediction errors. Although the paper reports on using TR for model updating to predict adulterant oil concentration, the methods should also be applicable to updating models distinguishing adulterated samples from pure extra virgin olive oil. Additionally, the approaches are general and can be used with other spectroscopic methods and adulterants as well as with other agriculture products.

From durum wheat to pasta: effect of technological processing on the levels of arsenic, cadmium, lead and nickel--a pilot study.

PubMed

Cubadda, F; Raggi, A; Zanasi, F; Carcea, M

2003-04-01

A study was undertaken to investigate the effect of technological processing in pasta-making on the content of arsenic, cadmium, lead and nickel. Milling of durum wheat as well as further processing were carried out in a pilot plant. Commercial pasta samples purchased from the local market were also included for comparison. Furthermore, the effect of cooking was investigated to gain information on the actual content of the selected elements in the final ready-to-eat product. Analyte concentrations in whole grain, semolina, pasta and cooked pasta were determined by inductively coupled plasma-mass spectrometry. Milling reduced the element content in the order nickel > arsenic > cadmium > lead. In the experimental conditions of this study, slight contamination by atmospheric lead in milling/pasta-making and release of nickel during pasta-making were observed. These issues have evidently been effectively dealt with in industrial processing given that remarkably lower levels of lead and nickel were found in commercial pastas compared with the experimental samples. On the whole, commercial pasta samples showed low average levels of all the elements included in this study. Cooking caused a significant decrease of the element content in all pasta samples, with average losses of 50-60% on a dry weight basis.

Effects of alternative cropping systems on globe artichoke qualitative traits.

PubMed

Spanu, Emanuela; Deligios, Paola A; Azara, Emanuela; Delogu, Giovanna; Ledda, Luigi

2018-02-01

Traditionally, globe artichoke cultivation in the Mediterranean basin is based on monoculture and on use of high amounts of nitrogen fertiliser. This raises issues regarding its compatibility with sustainable agriculture. We studied the effect of one typical conventional (CONV) and two alternative cropping systems [globe artichoke in sequence with French bean (NCV1), or in biannual rotation (NCV2) with cauliflower and with a leguminous cover crop in inter-row spaces] on yield, polyphenol and mineral content of globe artichoke heads over two consecutive growing seasons. NCV2 showed statistical differences in terms of fresh product yield with respect to the monoculture systems. In addition, the dihydroxycinnamic acids and dicaffeoylquinic acids of non-conventional samples were one-fold significantly higher than the conventional one. All the samples reported good mineral content, although NCV2 achieved a higher Fe content than conventional throughout the two seasons. After two and three dates of sampling, the CONV samples showed the highest levels of K content. In our study, an acceptable commercial yield and quality of 'Spinoso sardo' were achieved by shifting the common conventional agronomic management to more sustainable ones, by means of an accurate choice of cover crop species and rotations introduced in the systems. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Quality Assurance/Quality Control Jobs

NASA Astrophysics Data System (ADS)

Fanslau, Melody; Young, Janelle

The production of a quality and safe food product is essential to the success of any food manufacturing facility. Because of this great importance, a career in quality can be extremely rewarding. Without happy customers willing to buy a product, a company would not be able to survive. Quality issues such as foreign objects, spoiled or mislabeled product, failure to meet net weight requirements, or a recall can all turn customers away from buying a product. The food industry is a customer-driven market in which some consumers are brand loyal based on a history of high quality or in which a single bad experience with a product will turn them away for a lifetime. With this said, the main role of a quality department is to help ensure that quality issues such as these are eliminated or kept to a minimum to maintain or increase the number of customers purchasing their product.

[Good morning, Mr. Representative. Anything new to tell us about? Analysis of the pharmacological products introduced by the drugs industry into a health district].

PubMed

Baena Díez, J M; López Mompó, C; López Gosp, D; Martínez Martínez, J L; Ellacuría Torres, A; Fuentes Rodríguez, S

2003-12-01

To study whether the visits of technical health representatives (ITS) mean that new drugs are introduced. Design. Prospective, descriptive study. Urban health centre. The products presented by 137 ITS from 83 drug laboratories in weekly sessions for a year were studied. The products presented, the year they were first marketed, intrinsic value (IV), newness and use potential, cost per package and defined daily dose and material handed over were studied. 472 drug products were introduced. The most common ones belonged to the cardiovascular group (27.3%), digestion and metabolism (14.8%) and anti-infection drugs (13.3%). 65.5% had been on the market for <5 years. 84.3% had a high IV. Only 31 products (6.6%) were new (95% CI, 4.5-9.2). 71% of these supposed no or very slight therapeutic improvement, 25.8% a modest improvement and 3.2% a major improvement. Mean cost was 19.3 euros per package and 2 euros per DDD, with significant differences found (P<.006) on stratifying by date of marketing (more recently marketed products cost more). 61% of the products were presented with additional material (leaflets, monographs, journals), 21.6% with gifts of symbolic value, and 19.9% with samples of the product. There were significant differences (P<.03) between the new drugs and the normal prescriptions issued at the centre. In the new drugs, there were fewer products with high IV and cost per package and per DDD was higher. The products introduced by the reps do not include any important new drugs. They are presented with abundant back-up and are more expensive than those normally prescribed.

Women's and Community Issues Magazine. Final Report.

ERIC Educational Resources Information Center

Lutheran Social Mission Society, Philadelphia, PA. Lutheran Settlement House.

General Educational Development (GED), pre-GED, and adult basic education students and teachers in Lutheran Settlement House Women's Program GED classes participated in the production of two magazines focusing on women's and community issues. The process included the following: surveying GED classes to determine which current issues were of…

30 CFR 18.4 - Electrical equipment for which approval is issued.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES General Provisions § 18.4 Electrical equipment for which approval is issued. An approval will be issued... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical equipment for which approval is...

Education Statistics Quarterly. Volume 5, Issue 1.

ERIC Educational Resources Information Center

Dillow, Sally, Ed.

2003-01-01

This publication provides a comprehensive overview of work done across all parts of the National Center for Education Statistics (NCES). Each issue contains short publications, summaries, and descriptions that cover all NCES publications, data product, and funding opportunities developed over a 3-month period. Each issue also contains a message…

Motivating a Productive Discussion of Normative Issues through Debates

ERIC Educational Resources Information Center

Hennessey, Jessica

2014-01-01

In this article, the author presents a way of using in-class debates to discuss contentious issues and help students develop critical thinking skills. Three elements were incorporated into an undergraduate public finance course: a presentation of ethical approaches in order to formally discuss normative issues, class debates which required…

The development and status of Bt rice in China.

PubMed

Li, Yunhe; Hallerman, Eric M; Liu, Qingsong; Wu, Kongming; Peng, Yufa

2016-03-01

Multiple lines of transgenic rice expressing insecticidal genes from the bacterium Bacillus thuringiensis (Bt) have been developed in China, posing the prospect of increases in production with decreased application of pesticides. We explore the issues facing adoption of Bt rice for commercial production in China. A body of safety assessment work on Bt rice has shown that Bt rice poses a negligible risk to the environment and that Bt rice products are as safe as non-Bt control rice products as food. China has a relatively well-developed regulatory system for risk assessment and management of genetically modified (GM) plants; however, decision-making regarding approval of commercial production has become politicized, and two Bt rice lines that otherwise were ready have not been allowed to enter the Chinese agricultural system. We predict that Chinese farmers would value the prospect of increased yield with decreased use of pesticide and would readily adopt production of Bt rice. That Bt rice lines may not be commercialized in the near future we attribute to social pressures, largely due to the low level of understanding and acceptance of GM crops by Chinese consumers. Hence, enhancing communication of GM crop science-related issues to the public is an important, unmet need. While the dynamics of each issue are particular to China, they typify those in many countries where adoption of GM crops has been not been rapid; hence, the assessment of these dynamics might inform resolution of these issues in other countries. © 2015 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

Issues with monitoring the safety of psychoactive products under a legal regulated market for new psychoactive substances ('legal highs') in New Zealand.

PubMed

Rychert, Marta; Wilkins, Chris; Witten, Karen

2017-09-01

New Zealand's Psychoactive Substances Act (2013) established the world's first regulated market for 'low risk' psychoactive products ('legal highs'). Under an interim PSA regime, 47 existing products were permitted to be continued to be sold. To explore issues with the implementation of regulatory systems to monitor the safety of products on the legal market under the interim Psychoactive Substances Act regime. Semi-structured interviews with 30 key stakeholders, including industry, government agency, health and drug service professionals were conducted, transcribed and analysed thematically. In retrospect stakeholders questioned the decision to approve strong synthetic cannabinoid smoking products, noting their health risks because of product formulation, inconsistent manufacturing practices and smoking as the means of administration. Industry actors claimed the decision to approve synthetic cannabinoid smokeable products prevented potentially safer products from gaining market share. The system for withdrawing approved products which were subsequently found to be harmful was criticised for the poor quality of data available, limited engagement with health professionals and the slowness of product withdrawal. Many of the problems with the regime were attributed to the urgency under which the legal market under the interim Psychoactive Substances Act was established and implemented. The selection of 'safer' products, implementation of the product monitoring system, and engagement with health professionals may have benefited from more time and resources. An incremental approach to establishing the new market may have made the regulatory management of the new regime more workable. [Rychert M, Wilkins C, Witten K. Issues with monitoring the safety of psychoactive products under a legal regulated market for new psychoactive substances ('legal highs') in New Zealand. Drug Alcohol Rev 2017;00:000-000]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

Respiratory Issues in OI

MedlinePlus

Respiratory Issues in Osteogenesis Imperfecta \\ Introduction The respiratory system’s job is to bring oxygen into the body and remove carbon dioxide, the waste product of breathing. Because oxygen is the fuel ...

Planetary protection issues for sample return missions.

PubMed

DeVincenzi, D L; Klein, H P

1989-01-01

Sample return missions from a comet nucleus and the Mars surface are currently under study in the US, USSR, and by ESA. Guidance on Planetary Protection (PP) issues is needed by mission scientists and engineers for incorporation into various elements of mission design studies. Although COSPAR has promulgated international policy on PP for various classes of solar system exploration missions, the applicability of this policy to sample return missions, in particular, remains vague. In this paper, we propose a set of implementing procedures to maintain the scientific integrity of these samples. We also propose that these same procedures will automatically assure that COSPAR-derived PP guidelines are achieved. The recommendations discussed here are the first step toward development of official COSPAR implementation requirements for sample return missions.

Product Fund-Raising: A Practical Resource.

ERIC Educational Resources Information Center

Lemieux, Russell A.

1997-01-01

Reviews critical issues in selecting a product fund-raising program for schools. Suggests that the most important considerations should be the quality of the product or service and its "fit" with the school. (JDI)

Part 1: Tracing Russian VX to its synthetic routes by multivariate statistics of chemical attribution signatures.

PubMed

Holmgren, Karin Höjer; Valdez, Carlos A; Magnusson, Roger; Vu, Alexander K; Lindberg, Sandra; Williams, Audrey M; Alcaraz, Armando; Åstot, Crister; Hok, Saphon; Norlin, Rikard

2018-08-15

Chemical attribution signatures (CAS) associated with different synthetic routes used for the production of Russian VX (VR) were identified. The goal of the study was to retrospectively determine the production method employed for an unknown VR sample. Six different production methods were evaluated, carefully chosen to include established synthetic routes used in the past for large scale production of the agent, routes involving general phosphorus-sulfur chemistry pathways leading to the agent, and routes whose main characteristic is their innate simplicity in execution. Two laboratories worked in parallel and synthesized a total of 37 batches of VR via the six synthetic routes following predefined synthesis protocols. The chemical composition of impurities and byproducts in each route was analyzed by GC/MS-EI and 49 potential CAS were recognized as important markers in distinguishing these routes using Principal Component Analysis (PCA). The 49 potential CAS included expected species based on knowledge of reaction conditions and pathways but also several novel compounds that were fully identified and characterized by a combined analysis that included MS-CI, MS-EI and HR-MS. The CAS profiles of the calibration set were then analyzed using partial least squares discriminant analysis (PLS-DA) and a cross validated model was constructed. The model allowed the correct classification of an external test set without any misclassifications, demonstrating the utility of this methodology for attributing VR samples to a particular production method. This work is part one of a three-part series in this Forensic VSI issue of a Sweden-United States collaborative effort towards the understanding of the CAS of VR in diverse batches and matrices. This part focuses on the CAS in synthesized batches of crude VR and in the following two parts of the series the influence of food matrices on the CAS profiles are investigated. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluating MODIS satellite versus terrestrial data driven productivity estimates in Austria

NASA Astrophysics Data System (ADS)

Petritsch, R.; Boisvenue, C.; Pietsch, S. A.; Hasenauer, H.; Running, S. W.

2009-04-01

Sensors, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) on NASA's Terra satellite, are developed for monitoring global and/or regional ecosystem fluxes like net primary production (NPP). Although these systems should allow us to assess carbon sequestration issues, forest management impacts, etc., relatively little is known about the consistency and accuracy in the resulting satellite driven estimates versus production estimates driven from ground data. In this study we compare the following NPP estimation methods: (i) NPP estimates as derived from MODIS and available on the internet; (ii) estimates resulting from the off-line version of the MODIS algorithm; (iii) estimates using regional meteorological data within the offline algorithm; (iv) NPP estimates from a species specific biogeochemical ecosystem model adopted for Alpine conditions; and (v) NPP estimates calculated from individual tree measurements. Single tree measurements were available from 624 forested sites across Austria but only the data from 165 sample plots included all the necessary information for performing the comparison on plot level. To ensure independence of satellite-driven and ground-based predictions, only latitude and longitude for each site were used to obtain MODIS estimates. Along with the comparison of the different methods, we discuss problems like the differing dates of field campaigns (<1999) and acquisition of satellite images (2000-2005) or incompatible productivity definitions within the methods and come up with a framework for combining terrestrial and satellite data based productivity estimates. On average MODIS estimates agreed well with the output of the models self-initialization (spin-up) and biomass increment calculated from tree measurements is not significantly different from model results; however, correlation between satellite-derived versus terrestrial estimates are relatively poor. Considering the different scales as they are 9km² from MODIS and 1000m² from the sample plots together with the heterogeneous landscape may qualify the low correlation, particularly as the correlation increases when strongly fragmented sites are left out.

9 CFR 104.5 - Products for distribution and sale.

Code of Federal Regulations, 2013 CFR

2013-01-01

... BIOLOGICAL PRODUCTS § 104.5 Products for distribution and sale. An application for a U.S. Veterinary Biological Product Permit to import a biological product for Distribution and Sale shall be accompanied by... issued unless the conditions under which the biological product is to be prepared or the methods to be...

9 CFR 104.5 - Products for distribution and sale.

Code of Federal Regulations, 2012 CFR

2012-01-01

... BIOLOGICAL PRODUCTS § 104.5 Products for distribution and sale. An application for a U.S. Veterinary Biological Product Permit to import a biological product for Distribution and Sale shall be accompanied by... issued unless the conditions under which the biological product is to be prepared or the methods to be...

9 CFR 104.5 - Products for distribution and sale.

Code of Federal Regulations, 2014 CFR

2014-01-01

... BIOLOGICAL PRODUCTS § 104.5 Products for distribution and sale. An application for a U.S. Veterinary Biological Product Permit to import a biological product for Distribution and Sale shall be accompanied by... issued unless the conditions under which the biological product is to be prepared or the methods to be...

9 CFR 104.5 - Products for distribution and sale.

Code of Federal Regulations, 2011 CFR

2011-01-01

... BIOLOGICAL PRODUCTS § 104.5 Products for distribution and sale. An application for a U.S. Veterinary Biological Product Permit to import a biological product for Distribution and Sale shall be accompanied by... issued unless the conditions under which the biological product is to be prepared or the methods to be...

Risks related to the introduction of exotic diseases: a European view.

PubMed

Janssen, J; Marchant, B

1995-12-01

The European Union (EU) has historically been free of a number of epidemic diseases of livestock and is approaching eradication of several others. This situation is put at risk by the importation of live animals and animal products. Animal products include products which are broadly described as veterinary biologicals. For the purposes of assessing and controlling risks, these fall into two groups: crude products (e.g. serum and other blood products) and medicinal products (e.g. vaccines and other immunological products). This second group is covered by another paper in this issue of the Review. Risk reduction methods may be applied to crude veterinary biologicals pre- or post-importation. Pre-importation methods include product treatment, or ensuring that the source of the product is "risk-free'. Post-importation risk reduction involves product testing, or treatment achieved by channelling products to commercial operations which are covered by European medicines legislation. At present, EU Member States issue health certificates individually for crude veterinary biologicals, and conditions for entry may differ between States. This process will soon be harmonised (the provisions for marketing medicinal products have already been harmonised).

Accounting for treatment by center interaction in sample size determinations and the use of surrogate outcomes in the pessary for the prevention of preterm birth trial: a simulation study.

PubMed

Willan, Andrew R

2016-07-05

The Pessary for the Prevention of Preterm Birth Study (PS3) is an international, multicenter, randomized clinical trial designed to examine the effectiveness of the Arabin pessary in preventing preterm birth in pregnant women with a short cervix. During the design of the study two methodological issues regarding power and sample size were raised. Since treatment in the Standard Arm will vary between centers, it is anticipated that so too will the probability of preterm birth in that arm. This will likely result in a treatment by center interaction, and the issue of how this will affect the sample size requirements was raised. The sample size requirements to examine the effect of the pessary on the baby's clinical outcome was prohibitively high, so the second issue is how best to examine the effect on clinical outcome. The approaches taken to address these issues are presented. Simulation and sensitivity analysis were used to address the sample size issue. The probability of preterm birth in the Standard Arm was assumed to vary between centers following a Beta distribution with a mean of 0.3 and a coefficient of variation of 0.3. To address the second issue a Bayesian decision model is proposed that combines the information regarding the between-treatment difference in the probability of preterm birth from PS3 with the data from the Multiple Courses of Antenatal Corticosteroids for Preterm Birth Study that relate preterm birth and perinatal mortality/morbidity. The approach provides a between-treatment comparison with respect to the probability of a bad clinical outcome. The performance of the approach was assessed using simulation and sensitivity analysis. Accounting for a possible treatment by center interaction increased the sample size from 540 to 700 patients per arm for the base case. The sample size requirements increase with the coefficient of variation and decrease with the number of centers. Under the same assumptions used for determining the sample size requirements, the simulated mean probability that pessary reduces the risk of perinatal mortality/morbidity is 0.98. The simulated mean decreased with coefficient of variation and increased with the number of clinical sites. Employing simulation and sensitivity analysis is a useful approach for determining sample size requirements while accounting for the additional uncertainty due to a treatment by center interaction. Using a surrogate outcome in conjunction with a Bayesian decision model is an efficient way to compare important clinical outcomes in a randomized clinical trial in situations where the direct approach requires a prohibitively high sample size.

A Total Management Measurement Model for the Naval Weapons Center

DTIC Science & Technology

1991-02-01

Efficiency Productivity Public safety Employee safety Safety’Sccurity Customer safety Product security _ Quality of worklife Corporate Concern for...3 Corporate-ievel measures should represent a balance of in-house expertise; types of customers; and issues that surpass the customers’ I expertise...consideration. Examining the balance of distribution of these resources is also important. Addressing these issues would link the best potential to the most

9 CFR 318.9 - Samples of products, water, dyes, chemicals, etc., to be taken for examination.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Samples of products, water, dyes, chemicals, etc., to be taken for examination. 318.9 Section 318.9 Animals and Animal Products FOOD SAFETY... ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS General § 318.9 Samples of products, water, dyes...

9 CFR 318.9 - Samples of products, water, dyes, chemicals, etc., to be taken for examination.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Samples of products, water, dyes, chemicals, etc., to be taken for examination. 318.9 Section 318.9 Animals and Animal Products FOOD SAFETY... ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS General § 318.9 Samples of products, water, dyes...

9 CFR 318.9 - Samples of products, water, dyes, chemicals, etc., to be taken for examination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Samples of products, water, dyes, chemicals, etc., to be taken for examination. 318.9 Section 318.9 Animals and Animal Products FOOD SAFETY... ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS General § 318.9 Samples of products, water, dyes...

9 CFR 318.9 - Samples of products, water, dyes, chemicals, etc., to be taken for examination.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Samples of products, water, dyes, chemicals, etc., to be taken for examination. 318.9 Section 318.9 Animals and Animal Products FOOD SAFETY... ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS General § 318.9 Samples of products, water, dyes...

9 CFR 318.9 - Samples of products, water, dyes, chemicals, etc., to be taken for examination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Samples of products, water, dyes, chemicals, etc., to be taken for examination. 318.9 Section 318.9 Animals and Animal Products FOOD SAFETY... ESTABLISHMENTS; REINSPECTION AND PREPARATION OF PRODUCTS General § 318.9 Samples of products, water, dyes...

Assessment of health claims, content, and safety of herbal supplements containing Ginkgo biloba

PubMed Central

Fransen, Heidi P.; Pelgrom, Sylvia M.G.J.; Stewart-Knox, Barbara; de Kaste, Dries; Verhagen, Hans

2010-01-01

Background European Regulation 1924/2006 states that all health claims made on foods need to be substantiated scientifically. Objective To apply the PASSCLAIM criteria for the scientific substantiation of health claims on foods to herbal supplements containing Ginkgo biloba. Evaluation of three selected claimed health effects for G. biloba (improvement of blood circulation, improvement of symptoms of old age, and improvement of memory) was achieved through review of publicly available scientific data. A total of 35 human intervention studies were evaluated. Commercially available products claimed to contain mainly G. biloba (N=29) were randomly sampled in the Netherlands and analyzed for their content on ginkgo extract. Also, a toxicological risk assessment was performed. Results The three selected health claims investigated could not be substantiated. This was mainly because of a lack of data from studies in healthy volunteers. In most studies results performed with a 24% standardized G. biloba extract were described. However, our chemical analysis showed that 25 of the 29 sampled products did not contain the required minimum 24% standardized extract. Moreover, in most preparations the content of substances typical for G. biloba did not conform to what was declared on the label. Since toxicity data for G. biloba are very limited, a safety limit could not be established. Conclusions Evidence is lacking for three health claims of herbal products with G. biloba. Neither safety nor efficacy can be guaranteed at the recommended daily dose. The multidisciplinary approach described in this paper provides good insight into issues that are relevant for the evaluation of health claims for herbal food supplements. PMID:20927202

[Occupational exposure limits for polycyclic aromatic hydrocarbons. Current legal status and proposed changes].

PubMed

Brzeźnicki, Sławomir; Bonczarowska, Marzena; Gromiec, Jan P

2009-01-01

The evaluation of occupational exposure to polycyclic aromatic hydrocarbons (PAHs) in Poland is based on the results of measurements of their concentrations in workplace air compared to appropriate occupational exposure limits. The inconsistence in current regulations is the source of many interpretation-related problems. The objective of this work was to determine PAH concentrations in different technological processes and to analyze statistically the obtained data to indicate the presence (or absence) of differences between exposure indices calculated for 9 PAHs listed in the decree of the Minister of Labor and those (8 compounds) set by the Minister of Health. Air samples were collected during graphite electrode production, coke production, aluminum smelting, tire production and road paving. PAH concentrations in collected air samples were analyzed by HPLC. The obtained data calculated for each technological process indicate that indices of exposure based on 8 or 9 PAHs, taking into account their relative carcinogenicity, did not differ considerably and are not statistically different from exposure indices calculated for 11 PAHs. In view that the indices of exposure calculated for 8 and 9 compounds are not statistically different and that of all the PAHs listed in the decree of the Minister of Labor, two compounds are not classified as carcinogenic, it seems justified to substitute the latter by the list of compounds issued by the Minister of Health. The proposed modification should result in a better consistency of legal regulations without altering the quality of the occupational exposure evaluation. Furthermore, removing benzo(a)pyrene and dibenzo(ah)anthracene from the OEL list should solve the existing interpretation-related problems.

Airborne Multidrug-Resistant Bacteria Isolated from a Concentrated Swine Feeding Operation

PubMed Central

Chapin, Amy; Rule, Ana; Gibson, Kristen; Buckley, Timothy; Schwab, Kellogg

2005-01-01

The use of nontherapeutic levels of antibiotics in swine production can select for antibiotic resistance in commensal and pathogenic bacteria in swine. As a result, retail pork products, as well as surface and groundwaters contaminated with swine waste, have been shown to be sources of human exposure to antibiotic-resistant bacteria. However, it is unclear whether the air within swine operations also serves as a source of exposure to antibiotic-resistant bacterial pathogens. To investigate this issue, we sampled the air within a concentrated swine feeding operation with an all-glass impinger. Samples were analyzed using a method for the isolation of Enterococcus. A total of 137 presumptive Enterococcus isolates were identified to species level using standard biochemical tests and analyzed for resistance to erythromycin, clindamycin, virginiamycin, tetracycline, and vancomycin using the agar dilution method. Thirty-four percent of the isolates were confirmed as Enterococcus, 32% were identified as coagulase-negative staphylococci, and 33% were identified as viridans group streptococci. Regardless of bacterial species, 98% of the isolates expressed high-level resistance to at least two antibiotics commonly used in swine production. None of the isolates were resistant to vancomycin, an antibiotic that has never been approved for use in livestock in the United States. In conclusion, high-level multidrug-resistant Enterococcus, coagulase-negative staphylococci, and viridans group streptococci were detected in the air of a concentrated swine feeding operation. These findings suggest that the inhalation of air from these facilities may serve as an exposure pathway for the transfer of multidrug-resistant bacterial pathogens from swine to humans. PMID:15687049

Challenges of Moving IPG into Production

NASA Technical Reports Server (NTRS)

Schulbach, Cathy

2004-01-01

Over the past 5-6 years, NASA has been developing the Information Power Grid and has a persistent testbed currently based on GT2.4.2. This presentation will begin with an overview of IPG status and services, discuss key milestones in IPG development, and present early as well as expected applications. The presentation will discuss some of the issues encountered in developing a grid including the tension between providing centralized and distributed computing. These issues also affect how the grid is moved into full production. Finally, the presentation will provide current plans for moving IPG into full production, including gaining broad user input, developing acceptance criteria from the production operations group, planning upgrades, and training users.

Totally Integrated Munitions Enterprise ''Affordable Munitions Production for the 21st Century''

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burleson, R.R.; Poggio, M.E.; Rosenberg, S.J.

2000-09-13

The U.S. Army faces several munitions manufacturing issues: downsizing of the organic production base, timely fielding of affordable smart munitions, and munitions replenishment during national emergencies. Totally Integrated Munitions Enterprise (TIME) is addressing these complex issues via the development and demonstration of an integrated enterprise. The enterprise will include the tools, network, and open modular architecture controllers to enable accelerated acquisition, shortened concept to volume production, lower life cycle costs, capture of critical manufacturing processes, and communication of process parameters between remote sites to rapidly spin-off production for replenishment by commercial sources. TIME addresses the enterprise as a system, integratingmore » design, engineering, manufacturing, administration, and logistics.« less

Totally Integrated Munitions Enterprise ''Affordable Munitions Production for the 21st Century''

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burleson, R.R.; Poggio, M.E.; Rosenberg, S.J.

2000-07-14

The U.S. Army faces several munitions manufacturing issues: downsizing of the organic production base, timely fielding of affordable smart munitions, and munitions replenishment during national emergencies. TIME is addressing these complex issues via the development and demonstration of an integrated enterprise. The enterprise will include the tools, network, and open modular architecture controller to enable accelerated acquisition, shortened concept to volume production, lower life cycle costs, capture of critical manufacturing processes, and communication of process parameters between remote sites to rapidly spin-off production for replenishment by commercial sources. TIME addresses the enterprise as a system, integrating design, engineering, manufacturing, administration,more » and logistics.« less

Totally Integrated Munitions Enterprise ''Affordable Munitions Production for the 21st Century''

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burleson, R.R.; Poggio, M.E.; Rosenberg, S.J.

2000-08-18

The U.S. Army faces several munitions manufacturing issues: downsizing of the organic production base, timely fielding of affordable smart munitions, and munitions replenishment during national emergencies. Totally Integrated Munitions Enterprise (TIME) is addressing these complex issues via the development and demonstration of an integrated enterprise. The enterprise will include the tools, network, and open modular architecture controllers to enable accelerated acquisition, shortened concept to volume production, lower life cycle costs, capture of critical manufacturing processes, and communication of process parameters between remote sites to rapidly spin-off production for replenishment by commercial sources. TIME addresses the enterprise as a system, integratingmore » design, engineering, manufacturing, administration, and logistics.« less

9 CFR 113.3 - Sampling of biological products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Sampling of biological products. 113.3 Section 113.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... Applicability § 113.3 Sampling of biological products. Each licensee and permittee shall furnish representative...

9 CFR 113.3 - Sampling of biological products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sampling of biological products. 113.3 Section 113.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... Applicability § 113.3 Sampling of biological products. Each licensee and permittee shall furnish representative...

Contextual Factors Related to Conventional and Traditional Tobacco Use Among California Asian Indian Immigrants.

PubMed

Patel, Minal; Mistry, Ritesh; Maxwell, Annette E; Divan, Hozefa A; McCarthy, William J

2018-04-01

California's tobacco control program contracted for tobacco use surveillance of Asian Indian Americans to address the paucity of information about tobacco use in this community, given their growing proportion of California's population. This study examined correlates of conventional (CTU) and Asian Indian traditional tobacco use (TTU) in a population-based sample of predominantly immigrant Asian Indian adults residing in California (N = 3228). The analytic sample (n = 2140) was limited to self-identified immigrants from India. Descriptive statistics, bivariate analyses, and multivariate logistic regressions were conducted to examine correlates of tobacco use among Asian Indian immigrants related to their acculturation and religious affiliation. While 65% of the sample had ever used traditional tobacco products (paan masala, gutka, bidis), only 25% had ever used conventional tobacco (cigarettes, cigar, pipe, chewing tobacco, snuff). Less than 5% reported tobacco use in the past 30 days. Rates of ever TTU and CTU were higher among men than women. Ethnic enclave residence was not associated with tobacco use. Impaired mental health was associated with CTU, and number of years spent in the U.S. was positively associated with both CTU and TTU. Individuals affiliated with Sikhism were less likely to use tobacco than individuals affiliated with Hinduism. Few population-based studies in the U.S. address both CTU and TTU use among Asian Indian immigrants. Tobacco use in Asian Indian immigrants may be seriously underestimated if surveillance is limited to conventional tobacco products. Interventions to reduce tobacco use should address mental health issues and consider religious affiliation.

Analysis of cocoa flavanols and procyanidins (DP 1-10) in cocoa-containing ingredients and products by rapid resolution liquid chromatography: single-laboratory validation.

PubMed

Machonis, Philip R; Jones, Matthew A; Kwik-Uribe, Catherine

2014-01-01

Recently, a multilaboratory validation (MLV) of AOAC Official Method 2012.24 for the determination of cocoa flavanols and procyanidins (CF-CP) in cocoa-based ingredients and products determined that the method was robust, reliable, and transferrable. Due to the complexity of the CF-CP molecules, this method required a run time exceeding 1 h to achieve acceptable separations. To address this issue, a rapid resolution normal phase LC method was developed, and a single-laboratory validation (SLV) study conducted. Flavanols and procyanidins with a degree of polymerization (DP) up to 10 were eluted in 15 min using a binary gradient applied to a diol stationary phase, detected using fluorescence detection, and reported as a total sum of DP 1-10. Quantification was achieved using (-)-epicatechin-based relative response factors for DP 2-10. Spike recovery samples and seven different types of cocoa-based samples were analyzed to evaluate the accuracy, precision, LOD, LOQ, and linearity of the method. The within-day precision of the reported content for the samples was 1.15-5.08%, and overall precision was 3.97-13.61%. Spike-recovery experiments demonstrated recoveries of over 98%. The results of this SLV were compared to those previously obtained in the MLV and found to be consistent. The translation to rapid resolution LC allowed for an 80% reduction in analysis time and solvent usage, while retaining the accuracy and reliability of the original method. The savings in both cost and time of this rapid method make it well-suited for routine laboratory use.

Quality control of commercial bovine lactoferrin.

PubMed

Wakabayashi, Hiroyuki; Yamauchi, Koji; Abe, Fumiaki

2018-06-01

Herein we review commercial bovine lactoferrin quality issues by describing an example of industrial production, the current status of global quality standardization, and quality-activity concerns for further discussion. Morinaga Milk Industry has been industrially producing bovine lactoferrin in Milei GmbH, Germany, since 1989. We delineate its production and quality as an example of safe and high-quality manufacturing. Currently, global standardization in the quality of bovine lactoferrin is progressing through Novel Food and GRAS in the EU and USA, respectively. Novel Food was applied or notified to seven lactoferrin manufacturers and GRAS was notified to three manufacturers, two of which are for infant use and one is for adult use, by the end of 2017. The specifications of these regulations are relatively high, including more than 95% lactoferrin purity in protein, which means that such companies can supply relatively high-grade lactoferrin. There appear to be several concerns regarding lactoferrin quality affecting activities, including contamination of lipopolysaccharide (LPS) and angiogenin, purity, and degradation of lactoferrin sample. Although LPS is immunologically toxic when invading the body, it is distributed normally in foods and the gut. However, an industrial lactoferrin sample may contain LPS at a maximum LPS/lactoferrin molecule ratio = 1/1724, which means 99.9% of the lactoferrin molecule is LPS-free. It is difficult to speculate that LPS contained in a lactoferrin sample affects its activities. Finally in order to achieve good and reproducible results, we make proposals to researchers a use of high-grade lactoferrin, careful storage, and indication the manufacturers' names and specifications in the paper.

Corrosion of RoHS-Compliant Surface Finishes in Corrosive Mixed Flowing Gas Environments

NASA Astrophysics Data System (ADS)

Hannigan, K.; Reid, M.; Collins, M. N.; Dalton, E.; Xu, C.; Wright, B.; Demirkan, K.; Opila, R. L.; Reents, W. D.; Franey, J. P.; Fleming, D. A.; Punch, J.

2012-03-01

Recently, the corrosion resistance of printed wiring board (PWB) finishes has generated considerable interest due to field failures observed in various parts of the world. This study investigates the corrosion issues associated with the different lead-free PWB surface finishes. Corrosion products on various PWB surface finishes generated in mixed flowing gas (MFG) environments were studied, and analysis techniques such as scanning electron microscopy, energy-dispersive x-ray, x-ray diffraction, focused ion beam, and scanning Auger microscopy were used to quantify the corrosion layer thickness and determine the composition of corrosion products. The corrosion on organic solderability preservative samples shows similar corrosion products to bare copper and is mainly due to direct attack of copper traces by corrosive gases. The corrosion on electroless nickel immersion gold occurs primarily through the porosity in the film and is accelerated by the galvanic potential between gold and copper; similar results were observed on immersion silver. Immersion tin shows excellent corrosion resistance due to its inherent corrosion resistance in the MFG environment as well as the opposite galvanic potential between tin and copper compared with gold or silver and copper.

The influence of direct compression powder blend transfer method from the container to the tablet press on product critical quality attributes: a case study.

PubMed

Teżyk, Michał; Jakubowska, Emilia; Milczewska, Kasylda; Milanowski, Bartłomiej; Voelkel, Adam; Lulek, Janina

2017-06-01

The aim of this article is to compare the gravitational powder blend loading method to the tablet press and manual loading in terms of their influence on tablets' critical quality attributes (CQA). The results of the study can be of practical relevance to the pharmaceutical industry in the area of direct compression of low-dose formulations, which could be prone to content uniformity (CU) issues. In the preliminary study, particle size distribution (PSD) and surface energy of raw materials were determined using laser diffraction method and inverse gas chromatography, respectively. For trials purpose, a formulation containing two pharmaceutical ingredients (APIs) was used. Tablet samples were collected during the compression progress to analyze their CQAs, namely assay and CU. Results obtained during trials indicate that tested direct compression powder blend is sensitive to applied powder handling method. Mild increase in both APIs content was observed during manual scooping. Gravitational approach (based on discharge into the drum) resulted in a decrease in CU, which is connected to a more pronounced assay increase at the end of tableting than in the case of manual loading. The correct design of blend transfer over single unit processes is an important issue and should be investigated during the development phase since it may influence the final product CQAs. The manual scooping method, although simplistic, can be a temporary solution to improve the results of API's content and uniformity when compared to industrial gravitational transfer.

Dryland ecohydrology and climate change: critical issues and technical advances

NASA Astrophysics Data System (ADS)

Wang, L.; D'Odorico, P.; Evans, J. P.; Eldridge, D.; McCabe, M. F.; Caylor, K. K.; King, E. G.

2012-04-01

Drylands cover about 40% of the terrestrial land surface and account for approximately 40% of global net primary productivity. Water is fundamental to the biophysical processes that sustain ecosystem function and food production, particularly in drylands, where a tight coupling exists between water resource availability and ecosystem productivity, surface energy balance, and biogeochemical cycles. Currently, drylands support at least 2 billion people and comprise both natural and managed ecosystems. In this synthesis, we identify some current critical issues in the understanding of dryland systems and discuss how arid and semiarid environments are responding to the changes in climate and land use. Specifically, we focus on dryland agriculture and food security, dryland population growth, desertification, shrub encroachment and dryland development issues as factors of change requiring increased understanding and management. We also review recent technical advances in the quantitative assessment of human versus climate change related drivers of desertification, evapotranspiration partitioning using field deployable stable water isotope systems and the remote sensing of key ecohydrological processes. These technological advances provide new tools that assist in addressing major critical issues in dryland ecohydrology under climate change

The Hispanic Outlook in Higher Education, 1996-97.

ERIC Educational Resources Information Center

Hixson, Adalyn, Ed.; Gilroy, Marilyn, Ed.

1997-01-01

This document consists of all of Volume 7 (26 issues) of the journal, "The Hispanic Outlook in Higher Education," a biweekly journal that addresses issues in higher education for Hispanic Americans. Each issue presents several feature articles, a policy update called "Outlook on Washington," and a sample student success story.…

Ethical Issues in Expert Opinions and Testimony.

ERIC Educational Resources Information Center

Weed, Roger O.

2000-01-01

This article provides an overview of ethical issues in private for-profit practice, with particular focus on expert testimony, using examples from a sample of claims filed with the National Association of Rehabilitation Professionals in the Private Sector and malpractice insurance companies. Complaints most frequently involve issues related to…

Interactive Features of Web Surveys

ERIC Educational Resources Information Center

Conrad, Frederick G.

2007-01-01

Educational researchers and policy makers have come to rely on data from sample surveys. However, survey research on educational issues poses some special challenges. In many respects, the survey methodology issues in educational research are the same as those throughout the social and behavioral sciences. These issues concern obtaining the best…

Employment Issues in Higher Education: A Legal Compendium.

ERIC Educational Resources Information Center

Sagan, Jean S., Ed.; Rebel, Thomas P., Ed.

This volume contains 32 articles and sample documents treating legal issues in higher education employment focusing on major issues arising in a non-unionized setting. The first of six sections contains seven articles on the employment relationship in general that touch on current legal trends in employee selection procedures, employment…

Retention Issues: A Study of Alabama Special Education Teachers

ERIC Educational Resources Information Center

Plash, Shawn; Piotrowski, Chris

2006-01-01

This study investigated issues that impact attrition, migration and retention of special education teachers in Alabama. The sample comprised 70 teachers designated as "highly-qualified" who responded to a job satisfaction instrument, with a focus on retention issues, developed by Levine (2001). The results indicated that the major…

The Media Agenda-Setting Effect of Concrete versus Abstract Issues.

ERIC Educational Resources Information Center

Yagade, Aileen; Dozier, David M.

1990-01-01

Matches a content analysis sample of "Time" magazine coverage of two "concrete" issues (drug abuse, energy) and two "abstract" issues (nuclear arms race, federal budget deficit) with Gallup poll data over a lengthy period of time. Finds that concreteness increases news media agenda-setting power whereas abstractness…

Enhancing US competitiveness through Federal scientific and technical information: Issues and opportunities

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1990-01-01

The possibility of using Federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of Federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and Federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

Flash Desorption/Mass Spectrometry for the Analysis of Less- and Nonvolatile Samples Using a Linearly Driven Heated Metal Filament

NASA Astrophysics Data System (ADS)

Usmanov, Dilshadbek T.; Ninomiya, Satoshi; Hiraoka, Kenzo

2013-11-01

In this paper, the important issue of the desorption of less- and nonvolatile compounds with minimal sample decomposition in ambient mass spectrometry is approached using ambient flash desorption mass spectrometry. The preheated stainless steel filament was driven down and up along the vertical axis in 0.3 s. At the lowest position, it touched the surface of the sample with an invasion depth of 0.1 mm in 50 ms (flash heating) and was removed from the surface (fast cooling). The heating rate corresponds to ~104 °C/s at the filament temperature of 500 °C. The desorbed gaseous molecules were ionized by using a dielectric barrier discharge ion source, and the produced ions were detected by a time-of-flight (TOF) mass spectrometer. Less-volatile samples, such as pharmaceutical tablets, narcotics, explosives, and C60 gave molecular and protonated molecule ions as major ions with thermal decomposition minimally suppressed. For synthetic polymers (PMMA, PLA, and PS), the mass spectra reflected their backbone structures because of the suppression of the sequential thermal decompositions of the primary products. The present technique appears to be suitable for high-throughput qualitative analyses of many types of solid samples in the range from a few ng to 10 μg with minimal sample consumption. Some contribution from tribodesorption in addition to thermal desorption was suggested for the desorption processes. [Figure not available: see fulltext.

Development and Characterization of Chitosan Cross-Linked With Tripolyphosphate as a Sustained Release Agent in Tablets, Part I: Design of Experiments and Optimization.

PubMed

Pinto, Colin A; Saripella, Kalyan K; Loka, Nikhil C; Neau, Steven H

2018-04-01

Certain issues with the use of particles of chitosan (Ch) cross-linked with tripolyphosphate (TPP) in sustained release formulations include inefficient drug loading, burst drug release, and incomplete drug release. Acetaminophen was added to Ch:TPP particles to test for advantages of drug addition extragranularly over drug addition made during cross-linking. The influences of Ch concentration, Ch:TPP ratio, temperature, ionic strength, and pH were assessed. Design of experiments allowed identification of factors and 2-factor interactions that have significant effects on average particle size and size distribution, yield, zeta potential, and true density of the particles, as well as drug release from the directly compressed tablets. Statistical model equations directed production of a control batch that minimized span, maximized yield, and targeted a t 50 of 90 min (sample A); sample B that differed by targeting a t 50 of 240-300 min to provide sustained release; and sample C that differed from sample B by maximizing span. Sample B maximized yield and provided its targeted t 50 and the smallest average particle size, with the higher zeta potential and the lower span of samples B and C. Extragranular addition of a drug to Ch:TPP particles achieved 100% drug loading, eliminated a burst drug release, and can accomplish complete drug release. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Development of a passive, in situ, integrative sampler for hydrophilic organic contaminants in aquatic environments

USGS Publications Warehouse

Alvarez, D.A.; Petty, J.D.; Huckins, J.N.; Jones-Lepp, T. L.; Getting, D.T.; Goddard, J.P.; Manahan, S.E.

2004-01-01

Increasingly it is being realized that a holistic hazard assessment of complex environmental contaminant mixtures requires data on the concentrations of hydrophilic organic contaminants including new generation pesticides, pharmaceuticals, personal care products, and many chemicals associated with household, industrial, and agricultural wastes. To address this issue, we developed a passive in situ sampling device (the polar organic chemical integrative sampler [POCIS]) that integratively concentrates trace levels of complex mixtures of hydrophilic environmental contaminants, enables the determination of their time-weighted average water concentrations, and provides a method of estimating the potential exposure of aquatic organisms to the complex mixture of waterborne contaminants. Using a prototype sampler, linear uptake of selected herbicides and pharmaceuticals with log KowS < 4.0 was observed for up to 56 d. Estimation of the ambient water concentrations of chemicals of interest is achieved by using appropriate uptake models and determination of POCIS sampling rates for appropriate exposure conditions. Use of POCIS in field validation studies targeting the herbicide diuron in the United Kingdom resulted in the detection of the chemical at estimated concentrations of 190 to 600 ng/L. These values are in agreement with reported levels found in traditional grab samples taken concurrently.

Provenance information as a tool for addressing engineered nanoparticle reproducibility challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.; Munusamy, Prabhakaran; Thrall, Brian D.

Nanoparticles of various types are of increasing research and technological importance in biological and other applications. Difficulties in the production and delivery of nanoparticles with consistent and well defined properties appear in many forms and have a variety of causes. Among several issues are those associated with incomplete information about the history of particles involved in research studies including the synthesis method, sample history after synthesis including time and nature of storage and the detailed nature of any sample processing or modification. In addition, the tendency of particles to change with time or environmental condition suggests that the time betweenmore » analysis and application is important and some type of consistency or verification process can be important. The essential history of a set of particles can be identified as provenance information tells the origin or source of a batch of nano-objects along with information related to handling and any changes that may have taken place since it was originated. A record of sample provenance information for a set of particles can play a useful role in identifying some of the sources and decreasing the extent of particle variability and the observed lack of reproducibility observed by many researchers.« less

Metaproteomics of complex microbial communities in biogas plants

PubMed Central

Heyer, Robert; Kohrs, Fabian; Reichl, Udo; Benndorf, Dirk

2015-01-01

Production of biogas from agricultural biomass or organic wastes is an important source of renewable energy. Although thousands of biogas plants (BGPs) are operating in Germany, there is still a significant potential to improve yields, e.g. from fibrous substrates. In addition, process stability should be optimized. Besides evaluating technical measures, improving our understanding of microbial communities involved into the biogas process is considered as key issue to achieve both goals. Microscopic and genetic approaches to analyse community composition provide valuable experimental data, but fail to detect presence of enzymes and overall metabolic activity of microbial communities. Therefore, metaproteomics can significantly contribute to elucidate critical steps in the conversion of biomass to methane as it delivers combined functional and phylogenetic data. Although metaproteomics analyses are challenged by sample impurities, sample complexity and redundant protein identification, and are still limited by the availability of genome sequences, recent studies have shown promising results. In the following, the workflow and potential pitfalls for metaproteomics of samples from full-scale BGP are discussed. In addition, the value of metaproteomics to contribute to the further advancement of microbial ecology is evaluated. Finally, synergistic effects expected when metaproteomics is combined with advanced imaging techniques, metagenomics, metatranscriptomics and metabolomics are addressed. PMID:25874383

[Medical legal issues associated with the evaluation of herniated discs in seafarers to merchant ships].

PubMed

Onofri, E; Salesi, M; Massoni, F; Rosati, M V; Ricci, S

2012-01-01

"Seafarer" means person employed with any job on board a ship offshore, whether publicly or privately, excluding ships of war. Day by day a seafarer is forced to confront a reality in constant motion and live in environments that require awkward movements, and restricting the normal mobility of the person. In order to verify the frequency of herniated discs in this particular category of workers, given the recent introduction of INAIL tabulated diseases, a study was conducted on a sample of seafarers. Data analysis showed that 48.3% of the seafarers of the sample has herniated lumbar disc, and 34.5% of these duties in the deck, and 65.5% of the machine. The study of sample, varied as to age and task being performed, supports the assertion that the individual risk factors, especially age and obesity, are not strongly implicated in the genesis of disk herniation suffered by seafarers while the work factors (vibrations) play a more significant role in the onset of this disease. This consideration is part of a context, that of legal medical evaluation and in particular the causal relationship, which currently seems rather lacking in terms of literature and scientific production.

Risk assessments of polybrominated diphenyl ethers (PBDEs) during sludge application in China

NASA Astrophysics Data System (ADS)

Qian, Jun

2018-02-01

Due to increasingly less space in municipal environment, waste management has become an urgent issue worldwide. As one of common municipal waste, sewage sludge from wastewater treatment plants (WWTPs) contains abundant nutrients, some of which can be quite essential for plant growth. In consideration of nutrient recycling and energy saving, sludge application has been frequently promoted in many countries across the world. However, even after several sludge stabilization procedures, sewage sludge may still contain a large variety of toxic pollutants, especially some emerging organic contaminants (EOCs). Applied in various household products and plastic industries as additives, polybrominated diphenyl ethers (PBDEs) have been constantly detected in sewage sludge samples from several cities in China since 2005, as well as some biosolid samples after sludge stabilization processes, suggesting their strong persistence and wide occurrence. During sludge application onto farmland soils, PBDEs may desorb from sludge particles and get attached by soil organic matter (SOM), followed by plant root uptake and translocation to aboveground tissues. In this study, data about current pollution of PBDEs in sewage sludge samples from China was reviewed, and the potential risks during sludge application was comprehensively assessed.

Biosimilar therapeutics-what do we need to consider?

PubMed

Schellekens, Huub

2009-01-01

Patents for the first generation of approved biopharmaceuticals have either expired or are about to expire. Thus the market is opening for generic versions, referred to as 'biosimilars' (European Union) or 'follow-on protein products' (United States). Healthcare professionals need to understand the critical issues surrounding the use of biosimilars to make informed treatment decisions.The complex high-molecular-weight three-dimensional structures of biopharmaceuticals, their heterogeneity and dependence on production in living cells makes them different from classical chemical drugs. Current analytical methods cannot characterize these complex molecules sufficiently to confirm structural equivalence with reference molecules. Verification of the similarity of biosimilars to innovator biopharmaceuticals remains a key challenge. Furthermore, a critical safety issue, the immunogenicity of biopharmaceuticals, has been highlighted in recent years, confirming a need for comprehensive immunogenicity testing prior to approval and extended post-marketing surveillance.Biosimilars present a new set of challenges for regulatory authorities when compared with conventional generics. While the demonstration of a pharmacokinetic similarity is sufficient for conventional, small-molecule generic agents, a number of issues will make the approval of biosimilars more complicated. Documents recently published by the European Medicines Agency (EMEA) outlining requirements for the market approval of biosimilars provide much-needed guidance. The EMEA has approved a number of biosimilar products in a scientifically rigorous and balanced process. Outstanding issues include the interchangeability of biosimilars and innovator products, the possible need for unique naming to differentiate the various biopharmaceutical products, and more comprehensive labelling for biosimilars to include relevant clinical data.

Corrosion Considerations for Thermochemical Biomass Liquefaction Process Systems in Biofuel Production

NASA Astrophysics Data System (ADS)

Brady, M. P.; Keiser, J. R.; Leonard, D. N.; Whitmer, L.; Thomson, J. K.

2014-12-01

Thermochemical liquefaction processing of biomass to produce bio-derived fuels (e.g., gasoline, jet fuel, diesel, home heating oil, etc.) is of great recent interest as a renewable energy source. Approaches under investigation include direct liquefaction, hydrothermal liquefaction, hydropyrolysis, fast pyrolysis, etc., to produce energy dense liquids that can be utilized as produced or further processed to provide products of higher value. An issue with bio-oils is that they tend to contain significant concentrations of organic oxygenates, including acids, which make the bio-oil a potential source of corrosion issues in transport, storage, and use. Efforts devoted to modified/further processing of bio-oils to make them less corrosive are currently being widely pursued. Another issue that must also be addressed in bio-oil liquefaction is potential corrosion issues in the process equipment. Depending on the specific process, bio-oil liquefaction production temperatures are typically in the 300-600°C range, and the process environment can contain aggressive sulfur and halide species from both the biomass used and/or process additives. Detailed knowledge of the corrosion resistance of candidate process equipment alloys in these bio-oil production environments is currently lacking. This paper summarizes recent, ongoing efforts to assess the extent of corrosion of bio-oil process equipment, with the ultimate goal of providing a basis for the selection of the lowest cost alloy grades capable of providing the long-term corrosion resistance needed for future bio-oil production plants.

Corrosion considerations for thermochemical biomass liquefaction process systems in biofuel production

DOE PAGES

Brady, Michael P.; Keiser, James R.; Leonard, Donovan N.; ...

2014-11-11

Thermochemical liquifaction processing of biomass to produce bio-derived fuels (e.g. gasoline, jet fuel, diesel, home heating oil, etc.) is of great recent interest as a renewable energy source. Approaches under investigation include direct liquefaction, hydrothermal liquefaction, hydropyrolysis, fast pyrolysis, etc. to produce energy dense liquids that can be utilized as produced or further processed to provide products of higher value. An issue with bio-oils is that they tend to contain significant concentrations of organic compounds, which make the bio-oil acidic and a potential source of corrosion issues in in transport, storage, and use. Efforts devoted to modified/further processing of bio-oilsmore » to make them less corrosive are currently being widely pursued. Another aspect that must also be addressed is potential corrosion issues in the bio-oil liquefaction process equipment itself. Depending on the specific process, bio-oil liquefaction production temperatures can reach up to 400-600 °C, and involve the presence of aggressive sulfur, and halide species from both the biomass used and/or process additives. Detailed knowledge of the corrosion resistance of candidate process equipment alloys in these bio-oil production environments is currently lacking. Lastly, this paper summarizes our recent, ongoing efforts to assess the extent to which corrosion of bio-oil process equipment may be an issue, with the ultimate goal of providing the basis to select the lowest cost alloy grades capable of providing the long-term corrosion resistance needed for future bio-oil production plants.« less

Issues Involving The OSI Concept of Operation For Noble Gas Radionuclide Detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrigan, C R; Sun, Y

2011-01-21

The development of a technically sound protocol for detecting the subsurface release of noble gas radionuclides is critical to the successful operation of an on site inspection (OSI) under the CTBT and has broad ramifications for all aspects of the OSI regime including the setting of specifications for both sampling and analysis equipment used during an OSI. With NA-24 support, we are investigating a variety of issues and concerns that have significant bearing on policy development and technical guidance regarding the detection of noble gases and the creation of a technically justifiable OSI concept of operation. The work at LLNLmore » focuses on optimizing the ability to capture radioactive noble gases subject to the constraints of possible OSI scenarios. This focus results from recognizing the difficulty of detecting gas releases in geologic environments - a lesson we learned previously from the LLNL Non-Proliferation Experiment (NPE). Evaluation of a number of important noble gas detection issues, potentially affecting OSI policy, has awaited the US re-engagement with the OSI technical community. Thus, there have been numerous issues to address during the past 18 months. Most of our evaluations of a sampling or transport issue necessarily involve computer simulations. This is partly due to the lack of OSI-relevant field data, such as that provided by the NPE, and partly a result of the ability of LLNL computer-based models to test a range of geologic and atmospheric scenarios far beyond what could ever be studied in the field making this approach very highly cost effective. We review some highlights of the transport and sampling issues we have investigated during the past year. We complete the discussion of these issues with a description of a preliminary design for subsurface sampling that is intended to be a practical solution to most if not all the challenges addressed here.« less

Viability of NLCD Products From IRS-P6, And From Landsat 7 Scan-gap Data

NASA Technical Reports Server (NTRS)

Coan, Michael

2007-01-01

Landcover test on Salt Lake test site illustrates potential issues with AWiFS/LISS-III for classification of certain land cover classes (evergreen, shrub/scrub, woody wetlands, emergent wetlands). Canopy and impervious graphs of product differences from source indicate slightly lower overall accuracies (shorter peaks, wider bases) for AWiFS/LISS-III, compared to L5/L7. Inspection of individual products from canopy and impervious estimate tests revealed issues with combining AWifs quadrants, and similar but less severe effects with combining multiple dates of L7 scan gap data.

Map design and production issues for the Utah Gap Analysis Project

USGS Publications Warehouse

Hutchinson, John A.; Wittmann, J.H.

1997-01-01

The cartographic preparation and printing of four maps for the Utah GAP Project presented a wide range of challenges in cartographic design and production. In meeting these challenges, the map designers had to balance the purpose of the maps together with their legibility and utility against both the researchers' desire to show as much detail as possible and the technical limitations inherent in the printing process. This article describes seven design and production issues in order to illustrate the challenges of making maps from a merger of satellite data and GIS databases, and to point toward future investigation and development.

14 CFR 21.142 - Production limitation record.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Production limitation record. 21.142 Section 21.142 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... limitation record. The FAA issues a production limitation record as part of a production certificate. The...

14 CFR 21.142 - Production limitation record.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Production limitation record. 21.142 Section 21.142 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... limitation record. The FAA issues a production limitation record as part of a production certificate. The...

14 CFR 21.142 - Production limitation record.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Production limitation record. 21.142 Section 21.142 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... limitation record. The FAA issues a production limitation record as part of a production certificate. The...

Issues in Electronic Publishing.

ERIC Educational Resources Information Center

Meadow, Charles T.

1997-01-01

Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

Statistical Methods in Assembly Quality Management of Multi-Element Products on Automatic Rotor Lines

NASA Astrophysics Data System (ADS)

Pries, V. V.; Proskuriakov, N. E.

2018-04-01

To control the assembly quality of multi-element mass-produced products on automatic rotor lines, control methods with operational feedback are required. However, due to possible failures in the operation of the devices and systems of automatic rotor line, there is always a real probability of getting defective (incomplete) products into the output process stream. Therefore, a continuous sampling control of the products completeness, based on the use of statistical methods, remains an important element in managing the quality of assembly of multi-element mass products on automatic rotor lines. The feature of continuous sampling control of the multi-element products completeness in the assembly process is its breaking sort, which excludes the possibility of returning component parts after sampling control to the process stream and leads to a decrease in the actual productivity of the assembly equipment. Therefore, the use of statistical procedures for continuous sampling control of the multi-element products completeness when assembled on automatic rotor lines requires the use of such sampling plans that ensure a minimum size of control samples. Comparison of the values of the limit of the average output defect level for the continuous sampling plan (CSP) and for the automated continuous sampling plan (ACSP) shows the possibility of providing lower limit values for the average output defects level using the ACSP-1. Also, the average sample size when using the ACSP-1 plan is less than when using the CSP-1 plan. Thus, the application of statistical methods in the assembly quality management of multi-element products on automatic rotor lines, involving the use of proposed plans and methods for continuous selective control, will allow to automating sampling control procedures and the required level of quality of assembled products while minimizing sample size.

30 CFR 585.202 - What types of leases will BOEM issue?

Code of Federal Regulations, 2012 CFR

2012-07-01

... RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases General Lease Information § 585.202 What types of leases will BOEM issue? BOEM may issue leases on the OCS for the assessment and production of renewable energy and may authorize a...

30 CFR 585.202 - What types of leases will BOEM issue?

Code of Federal Regulations, 2013 CFR

2013-07-01

... RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases General Lease Information § 585.202 What types of leases will BOEM issue? BOEM may issue leases on the OCS for the assessment and production of renewable energy and may authorize a...

30 CFR 585.202 - What types of leases will BOEM issue?

Code of Federal Regulations, 2014 CFR

2014-07-01

... RENEWABLE ENERGY AND ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases General Lease Information § 585.202 What types of leases will BOEM issue? BOEM may issue leases on the OCS for the assessment and production of renewable energy and may authorize a...

30 CFR 285.202 - What types of leases will MMS issue?

Code of Federal Regulations, 2010 CFR

2010-07-01

... RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Issuance of OCS Renewable Energy Leases General Lease Information § 285.202 What types of leases will MMS issue? The MMS may issue leases on the OCS for the assessment and production of renewable energy and may authorize a...

Products and Services Notice - Naval Oceanography Portal

Science.gov Websites

Tropical Cyclone Formation Alert, Northwest Pacific Ocean Issued as required when tropical cyclone PGTW Tropical Cyclone Formation Alert, North Indian Ocean Issued as required when TC formation is , Southwest Pacific Ocean Issued as required when TC formation is expected in 12-24 hours WTPS31-35 PGTW

The Database Business: Managing Today--Planning for Tomorrow. Issues and Futures.

ERIC Educational Resources Information Center

Aitchison, T. M.; And Others

1988-01-01

Current issues and the future of the database business are discussed in five papers. Topics covered include aspects relating to the quality of database production; international ownership in the U.S. information marketplace; an overview of pricing strategies in the electronic information industry; and pricing issues from the viewpoints of online…

Education Statistics Quarterly. Volume 4 Issue 4, 2002.

ERIC Educational Resources Information Center

National Center for Education Statistics, 2002

2002-01-01

This publication provides a comprehensive overview of work done across all parts of the National Center for Education Statistics (NCES). Each issue contains short publications, summaries, and descriptions that cover all NCES publications and data products released in a 3-month period. Each issue also contains a message from the NCES on a timely…

Issues in midterm analysis and forecasting 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-07-01

Issues in Midterm Analysis and Forecasting 1998 (Issues) presents a series of nine papers covering topics in analysis and modeling that underlie the Annual Energy Outlook 1998 (AEO98), as well as other significant issues in midterm energy markets. AEO98, DOE/EIA-0383(98), published in December 1997, presents national forecasts of energy production, demand, imports, and prices through the year 2020 for five cases -- a reference case and four additional cases that assume higher and lower economic growth and higher and lower world oil prices than in the reference case. The forecasts were prepared by the Energy Information Administration (EIA), using EIA`smore » National Energy Modeling System (NEMS). The papers included in Issues describe underlying analyses for the projections in AEO98 and the forthcoming Annual Energy Outlook 1999 and for other products of EIA`s Office of Integrated Analysis and Forecasting. Their purpose is to provide public access to analytical work done in preparation for the midterm projections and other unpublished analyses. Specific topics were chosen for their relevance to current energy issues or to highlight modeling activities in NEMS. 59 figs., 44 tabs.« less

Toward Successful Implementation of Speech Recognition Technology: A Survey of SRT Utilization Issues in Healthcare Settings.

PubMed

Clarke, Martina A; King, Joshua L; Kim, Min Soon

2015-07-01

To evaluate physician utilization of speech recognition technology (SRT) for medical documentation in two hospitals. A quantitative survey was used to collect data in the areas of practice, electronic equipment used for documentation, documentation created after providing care, and overall thoughts about and satisfaction with the SRT. The survey sample was from one rural and one urban facility in central Missouri. In addition, qualitative interviews were conducted with a chief medical officer and a physician champion regarding implementation issues, training, choice of SRT, and outcomes from their perspective. Seventy-one (60%) of the anticipated 125 surveys were returned. A total of 16 (23%) participants were practicing in internal medicine and 9 (13%) were practicing in family medicine. Fifty-six (79%) participants used a desktop and 14 (20%) used a laptop (2%) computer. SRT products from Nuance were the dominant SRT used by 59 participants (83%). Windows operating systems (Microsoft, Redmond, WA) was used by more than 58 (82%) of the survey respondents. With regard to user experience, 42 (59%) participants experienced spelling and grammatical errors, 15 (21%) encountered clinical inaccuracy, 9 (13%) experienced word substitution, and 4 (6%) experienced misleading medical information. This study shows critical issues of inconsistency, unreliability, and dissatisfaction in the functionality and usability of SRT. This merits further attention to improve the functionality and usability of SRT for better adoption within varying healthcare settings.

Working with Persistent Pain: An Exploration of Strategies Utilised to Stay Productive at Work.

PubMed

Oakman, Jodi; Kinsman, Natasha; Briggs, Andrew M

2017-03-01

Purpose Maintaining productive employment for people with persistent pain conditions is challenging. This study aims to explore supports-work and non-work- used by employees to assist them in maintaining productive employment. Methods An exploratory, mixed-methods study comprising a questionnaire battery followed by semi-structured interviews to collect in-depth qualitative data was undertaken. The questionnaires measured descriptive variables used to select participants for interviews based on maximum heterogeneity sampling. Thirty-five semi-structured interviews were undertaken (14 males; 21 females). The interview schedule covered: employment situation, workplace challenges, workplace supports, coping strategies, motivations, future employment options and any other resources utilised. Inductive content analysis was undertaken using a grounded theory approach to systematically explore the data. Results Three key themes were identified: barriers to working productively, enablers to working productively, disclosing my condition at work. A key determinant of maintaining productive employment was a supportive employer. In addition, flexibility in the work organisation was also pivotal in maintaining sustainable, productive employment. An important issue emerged with regard to disclosure of one's condition to an employer. For some, this was a significant barrier to employment. Conclusions To ensure sustainable employment is attainable for those with persistent pain conditions, a good match is required between an employee and their work. Workplace accommodations may assist with improving job fit but this requires disclosure of a condition to an employer. Weighing up the risks and benefits of disclosure is difficult, and may be assisted by knowledge of available supports to assist with maintaining ongoing employment.

Survey of smallholder beef cattle production systems in different agro-ecological zones of Cambodia.

PubMed

Samkol, Pok; Sath, Keo; Patel, Mikaela; Windsor, Peter Andrew; Holtenius, Kjell

2015-10-01

A survey was conducted to better understand the contribution of farm productivity to rural household income and identify differences in production systems, feeding practices and development constraints to smallholder beef cattle producers in the four agro-ecological zones (AEZs) of Cambodia. A semi-structured questionnaire was used to interview 360 households in the four AEZs: I, the Great Lake Floodplain; II, the Mekong Floodplain; III, the Coastal and IV, the Plateau/Mountainous. In addition, samples of common nutritional resources used for cattle feed were collected for nutrient composition analysis, plus cattle were scored for body condition. Rice farming and cattle production were the most common sources of income in all AEZs. The average cattle herd size was 3.7 (SD = 2.4), but the majority of households raised 1-3 animals. The most common cattle management system was grazing with supplementation, mainly with rice straw and 'cut-and-carry' natural grasses fed during the wet season in all AEZs. The body condition score of all cattle types was 3.2 (SD = 0.8), except for cows in lactation that were 1.8. Major constraints to cattle production in AEZs I, II and III were lack of quality feed resources, capital for cattle production and concerns on breed quality, whereas in AEZ IV, diseases were identified as the main constraint. This survey confirms the importance of cattle to smallholders in the four AEZs. Interventions including farmer education to improve husbandry skills, increase the utilisation of forages and crop residues and address disease issues are necessary to enhance cattle production and rural livelihoods in Cambodia.

Diversity, distribution and quantification of antibiotic resistance genes in goat and lamb slaughterhouse surfaces and meat products.

PubMed

Lavilla Lerma, Leyre; Benomar, Nabil; Knapp, Charles W; Correa Galeote, David; Gálvez, Antonio; Abriouel, Hikmate

2014-01-01

The distribution and quantification of tetracycline, sulfonamide and beta-lactam resistance genes were assessed in slaughterhouse zones throughout meat chain production and the meat products; this study represents the first to report quantitatively monitor antibiotic resistance genes (ARG) in goat and lamb slaughterhouse using a culture independent approach, since most studies focused on individual bacterial species and their specific resistance types. Quantitative PCR (qPCR) revealed a high prevalence of tetracycline resistance genes tetA and tetB in almost all slaughterhouse zones. Sulfonamide resistance genes were largely distributed, while beta-lactam resistance genes were less predominant. Statistical analysis revealed that resistant bacteria, in most cases, were spread by the same route in almost all slaughterhouse zones, except for tetB, blaCTX and blaTEM genes, which occurred in few zones as isolated 'hot spots.' The sum of all analyzed ARG indicated that slaughterhouse surfaces and end products act as reservoirs of ARG, mainly tet genes, which were more prevalent in slaughtering room (SR), cutting room (CR) and commercial meat products (MP). Resistance gene patterns suggest they were disseminated throughout slaughterhouse zones being also detected in commercial meat products, with significant correlations between different sampling zones/end products and total resistance in SR, CR and white room (WR) zones, and also refrigerator 4 (F4) and MP were observed. Strategically controlling key zones in slaughterhouse (SR, CR and WR) by adequate disinfection methods could strategically reduce the risks of ARG transmission and minimize the issues of food safety and environment contamination.

Diversity, Distribution and Quantification of Antibiotic Resistance Genes in Goat and Lamb Slaughterhouse Surfaces and Meat Products

PubMed Central

Lavilla Lerma, Leyre; Benomar, Nabil; Knapp, Charles W.; Correa Galeote, David; Gálvez, Antonio; Abriouel, Hikmate

2014-01-01

The distribution and quantification of tetracycline, sulfonamide and beta-lactam resistance genes were assessed in slaughterhouse zones throughout meat chain production and the meat products; this study represents the first to report quantitatively monitor antibiotic resistance genes (ARG) in goat and lamb slaughterhouse using a culture independent approach, since most studies focused on individual bacterial species and their specific resistance types. Quantitative PCR (qPCR) revealed a high prevalence of tetracycline resistance genes tetA and tetB in almost all slaughterhouse zones. Sulfonamide resistance genes were largely distributed, while beta-lactam resistance genes were less predominant. Statistical analysis revealed that resistant bacteria, in most cases, were spread by the same route in almost all slaughterhouse zones, except for tetB, blaCTX and blaTEM genes, which occurred in few zones as isolated ‘hot spots.’ The sum of all analyzed ARG indicated that slaughterhouse surfaces and end products act as reservoirs of ARG, mainly tet genes, which were more prevalent in slaughtering room (SR), cutting room (CR) and commercial meat products (MP). Resistance gene patterns suggest they were disseminated throughout slaughterhouse zones being also detected in commercial meat products, with significant correlations between different sampling zones/end products and total resistance in SR, CR and white room (WR) zones, and also refrigerator 4 (F4) and MP were observed. Strategically controlling key zones in slaughterhouse (SR, CR and WR) by adequate disinfection methods could strategically reduce the risks of ARG transmission and minimize the issues of food safety and environment contamination. PMID:25479100

Design of systems for productivity and well being.

PubMed

Edwards, Kasper; Jensen, Per Langaa

2014-01-01

It has always been an ambition within the ergonomic profession to ensure that design or redesign of production systems consider both productivity and employee well being, but there are many approaches to how to achieve this. This paper identifies the basic issues to be addressed in light of some research activities at DTU, especially by persons responsible for facilitating design processes. Four main issues must be addressed: (1) determining the limits and scope of the system to be designed; (2) identifying stakeholders related to the system and their role in the system design; (3) handling the process' different types of knowledge; and (4) emphasizing that performance management systems, key performance indicators (KPIs), and leadership are also part of the system design and must be given attention. With the examples presented, we argue that knowledge does exist to help system design facilitators address these basic issues. Copyright © 2013. Published by Elsevier Ltd.

Issues deserve attention in encapsulating probiotics: Critical review of existing literature.

PubMed

Chen, Jun; Wang, Qi; Liu, Cheng-Mei; Gong, Joshua

2017-04-13

Probiotic bacteria are being increasingly added to food for developing products with health-promoting properties. However, the efficacy of probiotics in commercial products is often questioned due to the loss of their viability during shelf storage and in human gastrointestinal tracts. Encapsulation of probiotics has been expected to provide protection to probiotics, but not many commercial products contain encapsulated and viable probiotic cells owing to various reasons. To promote the development and application of encapsulation technologies, this paper has critically reviewed previous publications with a focus on the areas where studies have fallen short, including insufficient consideration of structural effects of encapsulating material, general defects in encapsulating methods and issues in evaluation methodologies and risk assessments for application. Corresponding key issues that require further studies are highlighted. Some emerging trends in the field, such as current treads in encapsulating material and recently advanced encapsulation techniques, have also been discussed.

[Aluminium content in foods with aluminium-containing food additives].

PubMed

Ogimoto, Mami; Suzuki, Kumi; Kabashima, Junichiro; Nakazato, Mitsuo; Uematsu, Yoko

2012-01-01

The aluminium (Al) content of 105 samples, including bakery products made with baking powder, agricultural products and seafoods treated with alum, was investigated. The amounts of Al detected were as follows (limit of quantification: 0.01 mg/g): 0.01-0.37 mg/g in 26 of 57 bakery products, 0.22-0.57 mg/g in 3 of 6 powder mixes, 0.01-0.05 mg/g in all three agricultural products examined, 0.03-0.90 mg/g in 4 of 6 seafood samples, 0.01-0.03 mg/g in 3 of 11 samples of instant noodles, 0.04-0.14 mg/g in 3 of 4 samples of vermicelli, 0.01 mg/g in 1 of 16 soybean products, but none in soybeans. Amounts equivalent to the PTWI of a 16 kg infant were detected in two samples of bakery products, two samples of powder mixes and one sample of salted jellyfish, if each sample was taken once a week. These results suggest that certain foods, depending on the product and the intake, might exceed the PTWI of children, especially infants.

FDA Issues Final Guidance Clarifying FDA and EPA Jurisdiction over Mosquito-Related Products

EPA Pesticide Factsheets

FDA finalized guidance to provide information on FDA and EPA jurisdiction over the regulation of mosquito-related products intended to function as pesticides, including those products intended to function as pesticides

Introduction--the Socially Sustainable Egg Production project.

PubMed

Swanson, J C; Mench, J A; Thompson, P B

2011-01-01

The social and political pressure to change egg production from conventional cage systems to alternative systems has been largely driven by the desire to provide more behavioral freedom for egg-laying hens. However, a change of this magnitude can affect other components of the production system and may result in unintended outcomes. To understand this issue, a Socially Sustainable Egg Production project was formed to 1) conduct a holistic and integrated systematic review of the current state of knowledge about various aspects of sustainable egg production, and 2) develop a coordinated grant proposal for future extramural funding based on the research priorities identified from the review. Expert study groups were formed to write evidence-based papers in 5 critical sustainability areas: hen health and welfare, economics, food safety and quality, public attitudes, and environmental impacts. These papers were presented as the PSA Emerging Issues Symposium on Social Sustainability of Egg Production at the 2010 Poultry Science Association meeting.

TES L2 Lite Standard Products

Atmospheric Science Data Center

2015-07-21

L2 Lite Standard Products The TES Lite products are intended to simplify TES data usage including data /model and data/data comparisons. This product can be used for science analysis ... PGE corrected a date range issue in the originally delivered standard output.  An updated set of  TES L2 Lite standard products was ...

Situating Language Production within the Matrix of Human Cognition: The State of the Art in Language Production Research

ERIC Educational Resources Information Center

Goldrick, Matthew; Costa, Albert; Schiller, Niels O.

2008-01-01

A summary of recent work in language production is presented, focusing on the "Third International Workshop on Language Production" (Chicago, USA, August 2006). The articles included in this special issue focus on three overlapping themes: language production in dialogue (Arnold; Costa, Pickering, & Sorace); multilingual language…

Ethical issues in livestock cloning.

PubMed

Thompson, P B

1999-01-01

Although cloning may eventually become an important technology for livestock production, four ethical issues must be addressed before the practice becomes widespread. First, researchers must establish that the procedure is not detrimental to the health or well-being of affected animals. Second, animal research institutions should evaluate the net social benefits to livestock producers by weighing the benefits to producers against the opportunity cost of research capacity lost to biomedical projects. Third, scientists should consider the indirect effects of cloning research on the larger ethical issues surrounding human cloning. Finally, the market structure for products of cloned animals should protect individual choice, and should recognize that many individuals find the prospect of cloning (or consuming cloned animals) repugnant. Analysis of these four issues is complicated by spurious arguments alleging that cloning will have a negative impact on environment and genetic diversity.

Solar Occultation Satellite Data and Derived Meteorological Products: Sampling Issues and Comparisons with Aura MLS

NASA Technical Reports Server (NTRS)

Manney, Gloria; Daffer, William H.; Zawodny, Joseph M.; Bernath, Peter F.; Hoppel, Karl W.; Walker, Kaley A.; Knosp, Brian W.; Boone, Chris; Remsberg, Ellis E.; Santee, Michelle L.;

Highs and lows: patterns of use, positive and negative effects of benzylpiperazine-containing party pills (BZP-party pills) amongst young people in New Zealand.

PubMed

Butler, Rachael A; Sheridan, Janie L

2007-11-19

This study aimed to investigate patterns and context of use of BZP-party pills, function of use, and positive and negative effects experienced by a sample of New Zealand young people who had used the products. A qualitative study comprised of semi-structured interviews and group discussions. The sample included 58 young people aged 17-23 years who had used BZP-party pills in the previous 12 months. Young people were using these substances in a range of settings--primarily during weekend social occasions--particularly as part of the dance party culture. They were mostly used for their stimulant properties and to enhance socialisation, and were often taken in combination with other legal and illicit drugs. Young people had suffered a range of physical and emotional negative effects, although none of these was reported as being life-threatening or long-term. Many participants had reduced the frequency with which they used BZP-party pills due to adverse effects. Potentially risky behaviours identified included taking large doses, mixing BZP-party pills with alcohol and other substances, and driving whilst under the influence of BZP-party pills. Findings suggest that young people in this study were not suffering excessive or dangerous adverse effects. However, potentially risky use of these products raises the issue of the need for developing harm reduction interventions.

Risk Factors of Extended-Spectrum β-Lactamase Producing Enterobacteriaceae Occurrence in Farms in Reunion, Madagascar and Mayotte Islands, 2016–2017

PubMed Central

Gay, Noellie; Leclaire, Alexandre; Laval, Morgane; Miltgen, Guillaume; Jégo, Maël; Stéphane, Ramin; Jaubert, Julien; Belmonte, Olivier; Cardinale, Eric

2018-01-01

In South Western Indian ocean (IO), Extended-Spectrum β-Lactamase producing Enterobacteriaceae (ESBL-E) are a main public health issue. In livestock, ESBL-E burden was unknown. The aim of this study was estimating the prevalence of ESBL-E on commercial farms in Reunion, Mayotte and Madagascar and genes involved. Secondly, risk factors of ESBL-E occurrence in broiler, beef cattle and pig farms were explored. In 2016–2017, commercial farms were sampled using boot swabs and samples stored at 4 °C before microbiological analysis for phenotypical ESBL-E and gene characterization. A dichotomous questionnaire was performed. Prevalences observed in all production types and territories were high, except for beef cattle in Reunion, which differed significantly. The most common ESBL gene was blaCTX-M-1. Generalized linear models explaining ESBL-E occurrence varied between livestock production sectors and allowed identifying main protective (e.g., water quality control and detergent use for cleaning) and risk factors (e.g., recent antibiotic use, other farmers visiting the exploitation, pet presence). This study is the first to explore tools for antibiotic resistance management in IO farms. It provides interesting hypothesis to explore about antibiotic use in IO territories and ESBL-E transmission between pig, beef cattle and humans in Madagascar. PMID:29473906

ADVANCES IN GROUND WATER SAMPLING PROCEDURES

EPA Science Inventory

Obtaining representative ground water samples is important for site assessment and remedial performance monitoring objectives. Issues which must be considered prior to initiating a ground-water monitoring program include defining monitoring goals and objectives, sampling point...

Cardoon (Cynara cardunculus L.) biomass production in a calcareous soil amended with sewage sludge compost and irrigated with sewage water

NASA Astrophysics Data System (ADS)

Lag, A.; Gomez, I.; Navarro-Pedreño, J.; Melendez, I.; Perez Gimeno, A.; Soriano-Disla, J. M.

2010-05-01

Energy use is one of the most important current global issues. Traditional energetic resources are limited and its use generates environmental problems, i.e. Global Warming, thus it is necessary to find alternative ways to produce energy. Energy crops represent one step towards sustainability but it must be coupled with appropriate land use and management adapted to local conditions. Moreover, positive effects like soil conservation; economical improvement of rural areas and CO2 storage could be achieved. Treated sewage water and sewage sludge compost were used as low-cost inputs for nutrition and irrigation, to cultivate cardoon (Cynara cardunculus L.) a perennial Mediterranean crop. The aim of the present field experiment was to ascertain the optimum dose of compost application to obtain maximum biomass production. Four compost treatments were applied by triplicate (D1=0; D2=30; D3=50; D4=70 ton/ha) and forty eight cardoon plants were placed in each plot, 12 per treatment, in a calcareous soil (CLfv; WRB, 2006) plot, located in the South East of Spain, in semi-arid conditions. The experiment was developed for one cardoon productive cycle (one year); soil was sampled three times (October, April and July). Soil, compost and treated sewage irrigation water were analyzed (physical and chemical properties). Stalk, capitula and leave weight as well as height and total biomass production were the parameters determined for cardoon samples. Analyses of variance (ANOVA) at p=0,05 significance level were performed to detect differences among treatments for each sampling/plot and to study soil parameters evolution and biomass production for each plot/dose. Several statistical differences in soil were found between treatments for extractable zinc, magnesium and phosphorus; as well as Kjeldahl nitrogen and organic carbon due to compost application, showing a gradual increase of nutrients from D1 to D4. However, considering the evolution of soil parameters along time, pH was the only with marked and significant decreasing trend from the first to the last sampling period. Mean cardoon biomass production in D1subplot was 13 ton/ha which differed significantly from D4 production, which was about 20 ton/ha. Hence, the maximum biomass production was obtained with the maximum compost dose. The results show that compost amendment increased cardoon biomass production, probably due to the improvement of soil properties, especially plant nutrient availability. No significant differences were found in soil parameters along time, with the exception of pH. However, longer test time is needed to evaluate long term effects in soil and to check the maintenance of biomass productivity. References Fernadez J., Curt, M.D., Aguado P.L. Industrial applications of Cynara cardunculus for energy and other uses. Industrial Crops and Product 24 (2006) pp 222-229. WRB (2006). World Reference Base for Soil Resources (2nd ed.). World Soil Resources Report 103, FAO, Rome, Italy (2006) 133 pp. Casado, J.; Sellés, S.; Navarro, J.; Bustamante, M.A.; Mataix, J.; Guerrero, C.; Gomez, I. Evaluation of composted sewage sludge as nutricional source for horticulturals soils. Waste Management 26 (2006). pp 946-952. Acknowledgements: The author gratefully acknowledges the Spanish Ministry of Innovation and Science for a research fellowship (AP2007-01641).

Recommendations and calculations concerning physical characteristics of the EEVT apparatus

NASA Technical Reports Server (NTRS)

1985-01-01

Several issues arose during the course of preparing for the flight of EEVT on STS-3. Documents concerning the issues are presented in the following order: (1) the possibility of mixing latex spheres with kidney cells as standard electrokinetic markers; (2) tube breakage and the potential for the development of leaks and bubbles; (3) effects of the shape of the sample gate on the electric field and the outward migration of cells; (4) suggestions for reducing electroosmosis by decreasing the diameter of the sample; and (5) predictions of the effects of modified sample dimensions on electroosmotic band spreading.