Managing Risk Assessment in Science Departments.

ERIC Educational Resources Information Center

Forlin, Peter; Forlin, Chris

1997-01-01

Describes a health-and-safety risk-management audit in four Queensland, Australia high schools. One major outcome of this research project is the development of a comprehensive risk-management policy in compliance with the law. Other outcomes include the preparation of a professional-development package in risk-management policy for use as a…

Enhancing the prospective biology teachers’ Pedagogical Content Knowledge (PCK) through a peer coaching based model

NASA Astrophysics Data System (ADS)

Anwar, Yenny

2018-05-01

This paper presents the results of implementation Peer Coaching Based Model that was implemented in development and Packaging Learning Tool program aimed at developing a Pedagogical Content Knowledge prospective teachers’ capabilities. Development and Packaging Learning Tool is a training program that applies various knowledge, attitude, and skill of students in order to form professional teacher. A need assessment was conducted to identify prospective teachers’ professional needs, especially PCK ability. Tests, questionnaires, interviews, field notes and video recordings were used in this research. The result indicated that the ability of Prospective teachers’ PCK has increased. This can be shown from the N-Gain that included in the medium category. This increase shows that there is integration of pedagogy and content; they have used varied strategies and can explain the reasons for its used. This means that the pattern belongs to the lower limit of the growing- PCK category. It is recommended to use peer coaching model during peer teaching.

Tutors' opinions of suitability of online learning programmes in continuing professional development for midwives.

PubMed

Gould, Dinah; Papadopoulos, Irena; Kelly, Daniel

2014-04-01

Online learning is frequently used in continuing professional development for qualified nurses and midwives. It is frequently assumed that the same package is appropriate for different groups of learners and that by reducing the need for tutorial input, tutorial time is saved. We evaluated the suitability of an online learning resource for suitability in continuing professional development for midwives. Originally developed for use as part of a work-based package for a specific audience, there had always been plans for more general use of the resource with other groups of health workers. Sequential mixed methods study. English universities. Seventy university tutors. Online questionnaire and in-depth interviews. Tutors did not consider that the online learning materials would be suitable for a wider audience without significant adaptation. They thought that uptake would increase need for tutorial input. Our findings demonstrate the pitfalls of removing learning from the context of practice. Technology customised to meet the needs of one group of learners probably does not have the potential for transfer to another group without significant adaptation. Those responsible for designing e-learning should take into account the needs of all the different audiences for whom the resource is intended from the outset, with consideration for the context in which learning will be applied to practice and how students will be supported. If the same package is to be used by different audiences and in different settings, tutors and students will require explicit instructions of how they should use the resource and depth of knowledge and level of competency that should be attained at the conclusion of the programme. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Online Parent Information and Support project, meeting parents' information and support needs for home-based management of childhood chronic kidney disease: research protocol.

PubMed

Swallow, Veronica; Knafl, Kathleen; Sanatacroce, Sheila; Hall, Andrew; Smith, Trish; Campbell, Malcolm; Webb, Nicholas J A

2012-09-01

This article is a report of a protocol for studying the development and evaluation of an online parent information and support package for home-based care of children with chronic kidney disease stages 3-5. The study is funded by a National Institute of Health Research, Research for Patient Benefit Grant awarded (December 2010). Approval to undetake the study was obtained from the Department of Health National Research Ethics Service (June 2011). Children with chronic kidney disease require skilled, home-based care by parents, supported by professionals. Parents have identified a need for continuously available online resources to supplement professional support, and structured resources tailored to parents' needs are highlighted by policy makers as key to optimizing care; yet, online resource provision is patchy with little evidence base. Using mixed methods, we will (i) conduct parent/child/young person/professional/patient and parent volunteer focus groups to explore views on existing resources, (ii) collaboratively define gaps in provision, identify desirable components, develop/test resources and conduct a feasibility randomized controlled trial, and (iii) of usual professional support versus usual support supplemented by the package. Eighty parents of children with chronic kidney disease will be randomized. Primary outcomes will assess parents' self-efficacy and views of resources, using standardized measures at entry and 24 weeks, and semi-structured interviews at 24 weeks. We will finalize trial components for a later definitive trial. By working collaboratively, we will derive a detailed insight into parents' information and support needs and experiences of using the package, and should see improved parental self-efficacy. © 2012 Blackwell Publishing Ltd.

Instructional image processing on a university mainframe: The Kansas system

NASA Technical Reports Server (NTRS)

Williams, T. H. L.; Siebert, J.; Gunn, C.

1981-01-01

An interactive digital image processing program package was developed that runs on the University of Kansas central computer, a Honeywell Level 66 multi-processor system. The module form of the package allows easy and rapid upgrades and extensions of the system and is used in remote sensing courses in the Department of Geography, in regional five-day short courses for academics and professionals, and also in remote sensing projects and research. The package comprises three self-contained modules of processing functions: Subimage extraction and rectification; image enhancement, preprocessing and data reduction; and classification. Its use in a typical course setting is described. Availability and costs are considered.

Net costs of health worker rural incentive packages: an example from the Lao People's Democratic Republic.

PubMed

Keuffel, Eric; Jaskiewicz, Wanda; Paphassarang, Chanthakhath; Tulenko, Kate

2013-11-01

Many developing countries are examining whether to institute incentive packages that increase the share of health workers who opt to locate in rural settings; however, uncertainty exists with respect to the expected net cost (or benefit) from these packages. We utilize the findings from the discrete choice experiment surveys applied to students training to be health professionals and costing analyses in Lao People's Democratic Republic to model the anticipated effect of incentive packages on new worker location decisions and direct costs. Incorporating evidence on health worker density and health outcomes, we then estimate the expected 5-year net cost (or benefit) of each incentive packages for 3 health worker cadres--physicians, nurses/midwives, and medical assistants. Under base case assumptions, the optimal incentive package for each cadre produced a 5-year net benefit (maximum net benefit for physicians: US$ 44,000; nurses/midwives: US$ 5.6 million; medical assistants: US$ 485,000). After accounting for health effects, the expected net cost of select incentive packages would be substantially less than the original estimate of direct costs. In the case of Lao People's Democratic Republic, incentive packages that do not invest in capital-intensive components generally should produce larger net benefits. Combining discrete choice experiment surveys, costing surveys and cost-benefit analysis methods may be replicated by other developing countries to calculate whether health worker incentive packages are viable policy options.

Effective e-learning for health professionals and students--barriers and their solutions. A systematic review of the literature--findings from the HeXL project.

PubMed

Childs, Sue; Blenkinsopp, Elizabeth; Hall, Amanda; Walton, Graham

2005-12-01

In 2003/4 the Information Management Research Institute, Northumbria University, conducted a research project to identify the barriers to e-learning for health professionals and students. The project also established possible ways to overcome these barriers. The North of England Workforce Development Confederation funded the project. The project comprised a systematic review of the literature on barriers to and solutions/critical success factors for e-learning in the health field. Fifty-seven references were suitable for analysis. This review was supplemented by a questionnaire survey of learners and an interview study of learning providers to ensure that data identified from the literature were grounded in reality. The main barriers are: requirement for change; costs; poorly designed packages; inadequate technology; lack of skills; need for a component of face-to-face teaching; time intensive nature of e-learning; computer anxiety. A range of solutions can solve these barriers. The main solutions are: standardization; strategies; funding; integration of e-learning into the curriculum; blended teaching; user friendly packages; access to technology; skills training; support; employers paying e-learning costs; dedicated work time for e-learning. The authors argue that librarians can play an important role in e-learning: providing support and support materials; teaching information skills; managing and providing access to online information resources; producing their own e-learning packages; assisting in the development of other packages.

Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS) User's Guide

NASA Technical Reports Server (NTRS)

Chapman, Jeffryes W.; Lavelle, Thomas M.; May, Ryan D.; Litt, Jonathan S.; Guo, Ten-Huei

2014-01-01

The Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS) software package is an open source, MATLABSimulink toolbox (plug in) that can be used by industry professionals and academics for the development of thermodynamic and controls simulations.

The Development and Implementation of a Teaching and Learning Strategy at a Modern Military Academy

ERIC Educational Resources Information Center

Thain, Richard Holman; McDonough, Ambrose; Priestley, Alan Duncan

2008-01-01

A strategy for teaching and learning was developed at Britannia Royal Naval College during 2006 in order to address several key issues. These included improving professional knowledge and skills retention, enhancing pedagogical practices to increase levels of student motivation, and adapting the training and educational package to an extremely…

Patient assessment within the context of healthcare delivery packages: A comparative analysis.

PubMed

Rossen, Camilla Blach; Buus, Niels; Stenager, Egon; Stenager, Elsebeth

2016-01-01

Due to an increased focus on productivity and cost-effectiveness, many countries across the world have implemented a variety of tools for standardizing diagnostics and treatment. In Denmark, healthcare delivery packages are increasingly used for assessment of patients. A package is a tool for creating coordination, continuity and efficient pathways; each step is pre-booked, and the package has a well-defined content within a predefined category of diseases. The aim of this study was to investigate how assessment processes took place within the context of healthcare delivery packages. The study used a constructivist Grounded Theory approach. Ethnographic fieldwork was carried out in three specialized units: a mental health unit and two multiple sclerosis clinics in Southern Denmark, which all used assessment packages. Several types of data were sampled through theoretical sampling. Participant observation was conducted for a total of 126h. Formal and informal interviews were conducted with 12 healthcare professionals and 13 patients. Furthermore, audio recordings were made of 9 final consultations between physicians and patients; 193min of recorded consultations all in all. Lastly, the medical records of 13 patients and written information about packages were collected. The comparative, abductive analysis focused on the process of assessment and the work made by all the actors involved. In this paper, we emphasized the work of healthcare professionals. We constructed five interrelated categories: 1. "Standardized assessing", 2. "Flexibility", which has two sub-categories, 2.1. "Diagnostic options" and 2.2. "Time and organization", and, finally, 3. "Resisting the frames". The process of assessment required all participants to perform the predefined work in the specified way at the specified time. Multidisciplinary teamwork was essential for the success of the process. The local organization of the packages influenced the assessment process, most notably the pre-defined scope of relevant diseases targeted by the package. The inflexible frames of the assessment package could cause resistance among clinicians. Moreover, expert knowledge was an important factor for the efficiency of the process. Some types of organizational work processes resulted in many patients being assessed, but without being diagnosed with at package-relevant disease. Limiting the grounds for using specialist knowledge in structured health care delivery may affect specialists' sense of professional autonomy and can result in professionals employing strategies to resist the frames of the packages. Finally, when organizing healthcare delivery packages, it seems important to consider how to make the optimal use of specialist knowledge. Copyright © 2015 Elsevier Ltd. All rights reserved.

AXIS: Adult Education eXpress Intercommunication Support. Final Report.

ERIC Educational Resources Information Center

Reiff, Tana

This package includes the final report and selected products of the Adult education eXpress Intercommunication Support (AXIS) project, which was conducted to facilitate communication related to professional development services administered by the Pennsylvania Department of Education's Bureau of Adult Basic and Literacy Education (ABLE) and…

Competencies for the 21st Century Information Professional: Translating the SLA Competencies into Business Competencies.

ERIC Educational Resources Information Center

Henczel, Sue

This paper examines how the Special Libraries Association competencies can be mapped to the broader business competencies of marketing (promoting), packaging (product development), persuading and performing (sales/customer service), and positioning (strategic maneuvering). It introduces a process whereby the skills, knowledge, understandings, and…

Hydration education: developing, piloting and evaluating a hydration education package for general practitioners

PubMed Central

McCotter, L; Douglas, P; Laur, C; Gandy, J; Fitzpatrick, L; Rajput-Ray, M; Ray, S

2016-01-01

Objectives To (1) assess the hydration knowledge, attitudes and practices (KAP) of doctors; (2) develop an evidence-based training package; and (3) evaluate the impact of the training package. Design Educational intervention with impact evaluation. Setting Cambridgeshire, UK. Participants General practitioners (GPs (primary care physicians)). Interventions Hydration and healthcare training. Main outcome measures Hydration KAP score before and immediately after the training session. Results Knowledge gaps of doctors identified before the teaching were the definition of dehydration, European Food Safety Authority water intake recommendations, water content of the human body and proportion of water from food and drink. A face-to-face teaching package was developed on findings from the KAP survey and literature search. 54 questionnaires were completed before and immediately after two training sessions with GPs. Following the training, total hydration KAP scores increased significantly (p<0.001; median (25th, 75th centiles); 32 (29, 34)). Attendees rated the session as excellent or good (90%) and reported the training was likely to influence their professional practice (100%). Conclusions The training package will continue to be developed and adapted, with increased focus on follow-up strategies as well as integration into medical curricula and standards of practice. However, further research is required in the area of hydration care to allow policymakers to incorporate hydration awareness and care with greater precision in local and national policies. PMID:27927656

Continuing professional development of dentists through distant learning: an Indira Gandhi National Open University-Dental Council of India experiment a report.

PubMed

Kuba, Ruchika; Kohli, Anil

2014-01-01

To keep themselves updated with all the advancements in the field of dentistry, dentists should involve themselves in some kind of professional development. Distance learning is the most appropriate way to serve the growing demand due to technological advancements. Indira Gandhi National Open University in collaboration with Dental Council of India (DCI) developed and launched two continuing professional development programs in Endodontics (postgraduate certificate in endodontics) and postgraduate certificate in oral implantology and has trained over 400 and 280 BDS dentists respectively till date. The program package consists of self-instructional material, assignments, videos and practical training. The training is conducted in premiere dental colleges and institutions recognized by DCI. The certificate is awarded after a term end examination, both in theory and practical. The pass percentages of the theory courses ranged from around 63% to 98%, and 90% of the candidates cleared the practical exam.

Incentives for non-physician health professionals to work in the rural and remote areas of Mozambique--a discrete choice experiment for eliciting job preferences.

PubMed

Honda, Ayako; Vio, Ferruccio

2015-04-26

Successfully motivating and retaining health workers is critical for the effective performance of health systems. In Mozambique, a shortage of health care professionals and low levels of staff motivation in rural and remote areas pose challenges to the provision of equitable health care delivery. This study provides quantitative information on the job preferences of non-physician health professionals in Mozambique, examining how different aspects of jobs are valued and how health professionals might respond to policy options that would post them to district hospitals in rural areas. The study used a discrete choice experiment (DCE) to elicit the job preferences of non-physician health professionals. Data collection took place in four Mozambique provinces: Maputo City, Maputo Province, Sofala and Nampula. DCE questionnaires were administered to 334 non-physician health professionals with specialized or university training ('mid-level specialists' and N1 and N2 categories). In addition, questionnaires were administered to 123 N1 and N2 students to enable comparison of the results for those with work experience with those without and determine how new N1 and N2 graduates can be attracted to rural posts. The results indicate that the provision of basic government housing has the greatest impact on the probability of choosing a job at a public health facility, followed by the provision of formal education opportunities and the availability of equipment and medicine at a health facility. The sub-group analysis suggests that job preferences vary according to stage of life and that incentive packages should vary accordingly. Recruitment strategies to encourage non-clinical professionals to work in rural/remote areas should also consider birthplace, as those born in rural/remote areas are more willing to work remotely. The study was undertaken within an overarching project that aimed to develop incentive packages for non-physician health professionals assigned to work in remote/rural areas. Based on the DCE results, the project team, together with the Mozambique Ministry of Health, has developed a range of health workforce retention strategies focusing on the provision of housing benefits and professional development opportunities to be utilized when assigning non-physician health professionals to rural/remote areas.

Assessing and Validating an Educational Resource Package for Health Professionals to Improve Smoking Cessation Care in Aboriginal and Torres Strait Islander Pregnant Women.

PubMed

Bar-Zeev, Yael; Bovill, Michelle; Bonevski, Billie; Gruppetta, Maree; Reath, Jennifer; Gould, Gillian S

2017-09-29

Australian Aboriginal pregnant women have a high smoking prevalence (45%). Health professionals lack adequate educational resources to manage smoking. Resources need to be tailored to ensure saliency, cultural-sensitivity and account for diversity of Indigenous populations. As part of an intervention to improve health professionals' smoking cessation care in Aboriginal pregnant women, a resource package was developed collaboratively with two Aboriginal Medical Services. The purpose of this study was to assess and validate this resource package. A multi-centred community-based participatory 4-step process (with three Aboriginal Medical Services from three Australian states), included: (1) Scientific review by an expert panel (2) 'Suitability of Materials' scoring by two Aboriginal Health Workers (3) Readability scores (4) Focus groups with health professionals. Content was analysed using six pre-determined themes (attraction, comprehension, self-efficacy, graphics and layout, cultural acceptability, and persuasion), with further inductive analysis for emerging themes. Suitability of Material scoring was adequate or superior. Average readability was grade 6.4 for patient resources (range 5.1-7.2), and 9.8 for health provider resources (range 8.5-10.6). Emergent themes included 'Getting the message right'; 'Engaging with family'; 'Needing visual aids'; and 'Requiring practicality under a tight timeframe'. Results were presented back to a Stakeholder and Consumer Aboriginal Advisory Panel and resources were adjusted accordingly. This process ensured materials used for the intervention were culturally responsive, evidence-based and useful. This novel formative evaluation protocol could be adapted for other Indigenous and culturally diverse interventions. The added value of this time-consuming and costly process is yet to be justified in research, and might impact the potential adaption by other projects.

Effects of a Multimedia Professional Development Package on Inclusive Science Teachers' Vocabulary Instruction

ERIC Educational Resources Information Center

Kennedy, Michael J.; Rodgers, Wendy J.; Romig, John Elwood; Lloyd, John Wills; Brownell, Mary T.

2017-01-01

Vocabulary knowledge is vital for students' success in school and beyond. However, students with disabilities and others who consistently score below their peers on various measures of vocabulary knowledge have difficulties in secondary-level content area courses. Because many students with disabilities are now educated primarily in general…

Effects of a Multimedia Professional Development Package on Inclusive Science Teachers' Vocabulary Instruction

ERIC Educational Resources Information Center

Kennedy, Michael J.; Rodgers, Wendy J.; Romig, John Elwood; Lloyd, John Wills; Brownell, Mary T.

2017-01-01

Vocabulary knowledge is vital for students' success in school and beyond. However, students with disabilities and others who consistently score below their peers on various measures of vocabulary knowledge have difficulties in secondary-level content area courses. Because many students with disabilities are now educated primarily in general…

The Promise, Pitfalls, and Persistent Challenge of Action Research

ERIC Educational Resources Information Center

Higgins, Chris

2016-01-01

Action research began as an ambitious epistemological and social intervention. As the concept has become reified, packaged for methodology textbooks and professional development workshops, it has degenerated into a cure that may be worse than the disease. The point is not the trivial one that action research, like any practice, sometimes shows up…

Development and evaluation of a wheelchair service provision training of trainers programme

PubMed Central

2017-01-01

Background In many countries, availability of basic training and continued professional development programmes in wheelchair services is limited. Therefore, many health professionals lack access to formal training opportunities and new approaches to improve wheelchair service provision. To address this need, the World Health Organization (WHO) developed the WHO Wheelchair Service Training of Trainers Programme (WSTPt), aiming to increase the number of trainers who are well prepared to deliver the WHO Wheelchair Service Training Packages. Despite these efforts, there was no recognised method to prepare trainers to facilitate these training programmes in a standardised manner. Objectives To understand if the WSTPt is an effective mechanism to train aspiring wheelchair service provision trainers. Method An action research study was conducted using a mixed-methods approach to data collection and analysis to integrate feedback from questionnaires and focus groups from three WHO WSTPt pilots. Results Trainees were satisfied with the WHO WSTPt and the iterative process appears to have helped to improve each subsequent pilot and the final training package. Conclusion The WHO WSTPt is an effective mechanism to train wheelchair service provision trainers. This programme has potential to increase the number of trainees and may increase the number of qualified service providers. PMID:28936423

A New Image Processing and GIS Package

NASA Technical Reports Server (NTRS)

Rickman, D.; Luvall, J. C.; Cheng, T.

1998-01-01

The image processing and GIS package ELAS was developed during the 1980's by NASA. It proved to be a popular, influential and powerful in the manipulation of digital imagery. Before the advent of PC's it was used by hundreds of institutions, mostly schools. It is the unquestioned, direct progenitor or two commercial GIS remote sensing packages, ERDAS and MapX and influenced others, such as PCI. Its power was demonstrated by its use for work far beyond its original purpose, having worked several different types of medical imagery, photomicrographs of rock, images of turtle flippers and numerous other esoteric imagery. Although development largely stopped in the early 1990's the package still offers as much or more power and flexibility than any other roughly comparable package, public or commercial. It is a huge body or code, representing more than a decade of work by full time, professional programmers. The current versions all have several deficiencies compared to current software standards and usage, notably its strictly command line interface. In order to support their research needs the authors are in the process of fundamentally changing ELAS, and in the process greatly increasing its power, utility, and ease of use. The new software is called ELAS II. This paper discusses the design of ELAS II.

Microcomputer Applications for Health Care Professionals. Volume I. Curriculum Improvement Project. Region II.

ERIC Educational Resources Information Center

Bruce, Lucy

This volume is one of three in a self-paced computer literacy course that gives allied health students a firm base of knowledge concerning computer usage in the hospital environment. It also develops skill in several applications software packages. Volume I contains materials for a three-hour course. A student course syllabus provides this…

Introducing Dynamic Mathematics Software to Secondary School Teachers: The Case of GeoGebra

ERIC Educational Resources Information Center

Hohenwarter, Judith; Hohenwarter, Markus; Lavicza, Zsolt

2009-01-01

This paper describes a study aimed to identify most common impediments related to the introduction of an open-source mathematical software package GeoGebra. We report on the analysis of data collected during a three-week professional development programme organised for middle and high school teachers in Florida. The study identified challenges…

Microcomputer Applications for Health Care Professionals. Volume II. Curriculum Improvement Project. Region II.

ERIC Educational Resources Information Center

Bruce, Lucy

This volume is one of three in a self-paced computer literacy course that gives allied health students a firm base of knowledge concerning computer usage in the hospital environment. It also develops skill in several applications software packages. Volume II contains materials for three one-hour courses on word processing applications, spreadsheet…

Empowering families with the experience of mental illness. A presentation of the Polish version of CAMILLE training package.

PubMed

Tabak, Izabela; Zabłocka-Żytka, Lidia; Czabała, Jan C

2016-01-01

The paper presents the CAMILLE training package prepared in the EU program Empowerment of Children and Adolescents of Mentally Ill Parents through Training of Professionals working with children and adolescents. The training is designed for psychiatrists, psychologists, social workers, teachers and others working with children and adolescents where a parent experiences mental disorders. The project was realized on 4 stages: (1) pre-analyses (quality and quantity) with professionals, family members and people experiencing mental disorders, in regards to the needs, experiences and expectations in education of professionals working with families of parents with mental illness; (2) development of a new pan-European training program for specialists working with these families; (3) pre-pilot implementation and evaluation of the training; (4) preparing of the final version of the training and pilot implementation in 7 countries participating in the project, also in Poland. The training program consists of 9 subjects, divided into 3 main groups: the basic knowledge (mental disorders, child development, attachment), experiences and needs of the families (experiences of parents, children, stigma), methods of family support (talking with children, resilience, successful services). The pilot implementation of the program showed great professionals' interest in the subject and training methods. The evaluation showed significant positive effects of the training in terms of the raise of awareness of influence of the parent's illness on needs of the child, parental abilities and ability of building the child resilience. The CAMILLE training is a valuable program that can be implemented in Poland.

Hypermedia and visual technology

NASA Technical Reports Server (NTRS)

Walker, Lloyd

1990-01-01

Applications of a codified professional practice that uses visual representations of the thoughts and ideas of a working group are reported in order to improve productivity, problem solving, and innovation. This visual technology process was developed under the auspices of General Foods as part of a multi-year study. The study resulted in the validation of this professional service as a way to use art and design to facilitate productivity and innovation and to define new opportunities. It was also used by NASA for planning Lunar/Mars exploration and by other companies for general business and advanced strategic planning, developing new product concepts, and litigation support. General Foods has continued to use the service for packaging innovation studies.

EVALUATION OF A MUSCULOSKELETAL TRAINING PACKAGE FOR OCCUPATIONAL HEALTH PRACTITIONERS

PubMed Central

Madan, Ira; Walker-Bone, Karen

2016-01-01

Background Musculoskeletal disorders (MSDs) are a common cause of disability in the workplace. Despite this there is known to be a wide variation in the assessment of MSDs by UK occupational health (OH) professionals. Therefore we developed a workshop, supported by a bespoke, on-line video, focussing on the assessment and management of MSDs. Aims To assess the impact of the training package on the knowledge, confidence and reported behaviour of attendees. Methods Workshops were held in two regional centres in England. Delegates completed a questionnaire on arrival to establish their baseline knowledge and confidence and again at the end of the training. A third questionnaire, with one reminder, was emailed to delegates four months following the workshops. Results 92 OH professionals (77 nurses, 10 doctors and 5 ‘others’) attended and more than 80% reported that they had no previous training in examining the upper or lower limb or in distinguishing specific from non-specific MSDs. Confidence among delegates in examination, diagnosis and management of MSDs improved after the workshop and these changes were sustained and remained statistically significant from baseline four months afterwards. Following the training, 79% (50) of delegates reported that they had shared the knowledge and skills acquired with their colleagues and 71% reported that they had used the examination techniques in their day-to-day practice. Conclusion We have developed a training package which resulted in improved knowledge among attendees and gave them confidence to use their skills in practice. PMID:24213093

Compiling, costing and funding complex packages of home-based health care.

PubMed

Noyes, Jane; Lewis, Mary

2007-06-01

Nurses play a central role in putting together complex packages of care to support children with complex healthcare needs and their families in the community. However, there is little evidence or guidance to support this area of practice. At present, the process of compiling a care package and obtaining funding takes too long, causing significant delays in discharge and great frustration for parents, children and professionals. This article presents a combination of best practice guidance and, where possible, evidence-based principles that can be adapted and applied to an individual case irrespective of the child's diagnosis. The aim is to assist nurses and other healthcare professionals in organising funding for packages of care, bringing about the desired outcomes of successful discharge and appropriate community support. To work effectively as keyworkers for these children and families nurses need knowledge and skills in relation to: multidisciplinary assessment frameworks and processes, identifying appropriate models of service provision, costing care packages and approaches to obtaining funding. A further article next month will address risk management and clinical governance issues in delivering complex home-based care.

Essentials of PEM Fellowship Part 2: The Profession in Entrustable Professional Activities.

PubMed

Hsu, Deborah; Nypaver, Michele; Fein, Daniel M; McAneney, Constance; Santen, Sally; Nagler, Joshua; Zuckerbraun, Noel; Roskind, Cindy Ganis; Reynolds, Stacy; Zaveri, Pavan; Stankovic, Curt; House, Joseph B; Langhan, Melissa; Titus, M Olivia; Dahl-Grove, Deanna; Klasner, Ann E; Ramirez, Jose; Chang, Todd; Jacobs, Elizabeth; Chapman, Jennifer; Lumba-Brown, Angela; Thompson, Tonya; Mittiga, Matthew; Eldridge, Charles; Heffner, Viday; Herman, Bruce E; Kennedy, Christopher; Madhok, Manu; Kou, Maybelle

2016-06-01

This article is the second in a 7-part series that aims to comprehensively describe the current state and future directions of pediatric emergency medicine (PEM) fellowship training from the essential requirements to considerations for successfully administering and managing a program to the careers that may be anticipated upon program completion. This article describes the development of PEM entrustable professional activities (EPAs) and the relationship of these EPAs with existing taxonomies of assessment and learning within PEM fellowship. It summarizes the field in concepts that can be taught and assessed, packaging the PEM subspecialty into EPAs.

Aid Professional Growth. Module CG D-2 of Category D--Operating. Competency-Based Career Guidance Modules.

ERIC Educational Resources Information Center

Ruff, Eldon E.

This learning module, one in a series of competency-based guidance program training packages focusing upon professional and paraprofessional competencies of guidance personnel, deals with aiding professional growth. Addressed in the module are the following topics: assessing competencies; determining certification, licensure, and registration…

2012 drug packaging review: many dangerous, reportable flaws.

PubMed

2013-05-01

Drug packaging plays an important role in protecting and providing information to patients. The packaging examined by Prescrire in 2012, on the whole, still fails to perform all of these functions effectively. Two issues are especially worrisome. First, packaging too often poses a danger to children. In addition, too many patient leaflets provide incomplete information about adverse effects, thus failing to properly protect the most vulnerable patients. Yet, the method Prescrire used to analyse drug packaging shows that it is not difficult to detect and anticipate risks. It is up to healthcare professionals to take advantage of the method, to protect patients from, and report, dangerous packaging.

History-Infused Lessons in Introductory Calculus at the Secondary Level: Students' Learning and Perceptions

ERIC Educational Resources Information Center

Poh, Wei Beng; Dindyal, Jaguthsing

2016-01-01

A history-infused lesson package developed by a team of teachers in a professional learning community was used to teach introductory calculus in a secondary school. First, we report a quasi-experimental design that showed that students in the experimental group performed significantly better than students in the control group. Second, we report on…

Write Proposals. Module CG B-2 of Category B--Supporting. Competency-Based Career Guidance Modules.

ERIC Educational Resources Information Center

Gustafson, Richard A.

This module is intended to help guidance personnel in a variety of educational and agency settings plan and develop successful proposals to assist in financing the improvement of existing or future career guidance programs. The module is one of a series of competency-based guidance program training packages focusing upon specific professional and…

Textbook Software versus Professional Software: Which Is Better for Instructional Purposes?

ERIC Educational Resources Information Center

Snell, Meggan; Yatsenko, Olga

2002-01-01

Compares textbook software with professional packages such as Peachtree for teaching accounting, in terms of cost, availability, ease of teaching and learning, and applicability. Makes suggestions for choosing accounting software. (SK)

A community-based approach to non-communicable chronic disease management within a context of advancing universal health coverage in China: progress and challenges.

PubMed

Xiao, Nanzi; Long, Qian; Tang, Xiaojun; Tang, Shenglan

2014-01-01

Paralleled with the rapid socio-economic development and demographic transition, an epidemic of non-communicable chronic diseases (NCDs) has emerged in China over the past three decades, resulting in increased disease and economic burdens. Over the past decade, with a political commitment of implementing universal health coverage, China has strengthened its primary healthcare system and increased investment in public health interventions. A community-based approach to address NCDs has been acknowledged and recognized as one of the most cost-effective solutions. Community-based strategies include: financial and health administrative support; social mobilization; community health education and promotion; and the use of community health centers in NCD detection, diagnosis, treatment, and patient management. Although China has made good progress in developing and implementing these strategies and policies for NCD prevention and control, many challenges remain. There are a lack of appropriately qualified health professionals at grass-roots health facilities; it is difficult to retain professionals at that level; there is insufficient public funding for NCD care and management; and NCD patients are economically burdened due to limited benefit packages covering NCD treatment offered by health insurance schemes. To tackle these challenges we propose developing appropriate human resource policies to attract greater numbers of qualified health professionals at the primary healthcare level; adjusting the service benefit packages to encourage the use of community-based health services; and increase government investment in public health interventions, as well as investing more on health insurance schemes.

Development of a Learning-Oriented Computer Assisted Instruction Designed to Improve Skills in the Clinical Assessment of the Nutritional Status: A Pilot Evaluation

PubMed Central

García de Diego, Laura; Cuervo, Marta; Martínez, J. Alfredo

2015-01-01

Computer assisted instruction (CAI) is an effective tool for evaluating and training students and professionals. In this article we will present a learning-oriented CAI, which has been developed for students and health professionals to acquire and retain new knowledge through the practice. A two-phase pilot evaluation was conducted, involving 8 nutrition experts and 30 postgraduate students, respectively. In each training session, the software developed guides users in the integral evaluation of a patient’s nutritional status and helps them to implement actions. The program includes into the format clinical tools, which can be used to recognize possible patient’s needs, to improve the clinical reasoning and to develop professional skills. Among them are assessment questionnaires and evaluation criteria, cardiovascular risk charts, clinical guidelines and photographs of various diseases. This CAI is a complete software package easy to use and versatile, aimed at clinical specialists, medical staff, scientists, educators and clinical students, which can be used as a learning tool. This application constitutes an advanced method for students and health professionals to accomplish nutritional assessments combining theoretical and empirical issues, which can be implemented in their academic curriculum. PMID:25978456

Development of a learning-oriented computer assisted instruction designed to improve skills in the clinical assessment of the nutritional status: a pilot evaluation.

PubMed

García de Diego, Laura; Cuervo, Marta; Martínez, J Alfredo

2015-01-01

Computer assisted instruction (CAI) is an effective tool for evaluating and training students and professionals. In this article we will present a learning-oriented CAI, which has been developed for students and health professionals to acquire and retain new knowledge through the practice. A two-phase pilot evaluation was conducted, involving 8 nutrition experts and 30 postgraduate students, respectively. In each training session, the software developed guides users in the integral evaluation of a patient's nutritional status and helps them to implement actions. The program includes into the format clinical tools, which can be used to recognize possible patient's needs, to improve the clinical reasoning and to develop professional skills. Among them are assessment questionnaires and evaluation criteria, cardiovascular risk charts, clinical guidelines and photographs of various diseases. This CAI is a complete software package easy to use and versatile, aimed at clinical specialists, medical staff, scientists, educators and clinical students, which can be used as a learning tool. This application constitutes an advanced method for students and health professionals to accomplish nutritional assessments combining theoretical and empirical issues, which can be implemented in their academic curriculum.

Building Bridges between healthcare professionals, patients and families: A coproduced and integrated approach to self-management support in stroke.

PubMed

Jones, Fiona; Pöstges, Heide; Brimicombe, Lucinda

2016-10-14

Programmes providing self-management support for patients and families are gaining attention and have shown promising outcomes with regards to reducing long-term unmet needs post stroke. However, notions of what good self-management support looks like can differ depending on professional opinion, individual preferences, skills and experiences of patients and their families as well as on how care and rehabilitation is organised in a particular healthcare setting. This resonates with the perspective of patient-centred care, according to which the meaning of good care is not universal, but rather jointly shaped between healthcare professionals and patients in everyday interactions. While self-management support is continuously co-produced in care and rehabilitation practices, most self-management programmes are typically provided as an 'add-on' to existing statutory care. This paper aims to deepen the understanding of how self-management support can be made an integral part of everyday care and rehabilitation using Bridges methodology. The authors provide a self-reflective account on 'Bridges' an integrated approach to self-management support, which is used by healthcare professionals within acute and community stroke rehabilitation across the UK, and in some parts of New Zealand and Australia. Bridges is based on self-efficacy principles, but has a central aim of professionals sharing decision-making and expertise with patients and families in every healthcare interaction. Methodologically, the co-production of a Bridges support package with local healthcare professionals and patients is critical. The authors present the values articulated by the support package and how it engages professionals, patients and Bridges training facilitators in a continuous process of adjusting and re-adjusting situated self-management support practices. Our reflections reveal the need to consider development and implementation of self-management support as one and the same on-going process, if we are to facilitate successful engagement and interest from healthcare professionals as well as their patients and families.

Examining the Efficacy of a Basic Functional Behavioral Assessment Training Package for School Personnel

ERIC Educational Resources Information Center

Loman, Sheldon L.; Horner, Robert H.

2014-01-01

This study evaluated the effects of manualized training in "Basic" functional behavioral assessment (FBA) for typical school professionals on the ability of these professionals to complete technically adequate FBAs. Twelve school professionals participated in four 1-hr training sessions using the Basic FBA training handbook. After…

Computer Aided Design Parameters for Forward Basing

DTIC Science & Technology

1988-12-01

21 meters. Systematic errors within limits stated for absolute accuracy are tolerated at this level. DEM data acquired photogrammetrically using manual ...This is a professional drawing package, 19 capable of the manipulation required for this project. With the AutoLISP programming language (a variation on...Table 2). 0 25 Data Conversion Package II GWN System’s Digital Terrain Modeling (DTM) package was used. This AutoLISP -based third party software is

Speaking Up for Yourself (Self-Advocacy). How To Plan and Run Courses That Really Help.

ERIC Educational Resources Information Center

Cook, Sherry; Nicolls, Beryl, Ed.

This guide is part of a package developed for people with disabilities and professionals wishing to conduct advocacy courses by Skills for People, a British advocacy group. The guide contains 13 sections: (1) why this guide was written; (2) how to use this guide; (3) how to have good meetings; (4) checklist for genuine involvement; (5) checklist…

Mitigating land pollution through pesticide packages - The case of a collection scheme in Rural China.

PubMed

Jin, Shuqin; Bluemling, Bettina; Mol, Arthur P J

2018-05-01

Pesticide packages that are discarded on agricultural land can contaminate water bodies and pose a threat to the environment and human health. Little is known about how developing countries deal with this kind of land pollution. While in developed countries, packages are collected by professional organizations, the smallholder context in developing countries makes the collection of this waste much more difficult. This paper introduces and analyses a successful Pesticide Package Collection Scheme in one of the poorest regions in China, i.e. Guangxi Province. The purpose of the paper is to analyze and discuss how such a scheme can be established by multiple actors. The paper finds that the underlying success factors for establishing such a scheme are 1.) that a scheme piggy-bags on existing economic structures that reach out to farmers (e.g. associations); 2.) that the scheme itself facilitates actors' exchange of resources to establish a temporary resource equilibrium; 3.) that all stakeholders obtain returns on their investment, even if the quality and time scale of these returns may differ. The initiation of the scheme by a pesticide company however increased both its political and market influence. Caution hence has to be paid to whether the short-term improvement in land pollution happens at the expense of a dependency on and increased use of certain kinds of pesticides. Copyright © 2017 Elsevier B.V. All rights reserved.

2010 drug packaging review: identifying problems to prevent errors.

PubMed

2011-06-01

Prescrire's analyses showed that the quality of drug packaging in 2010 still left much to be desired. Potentially dangerous packaging remains a significant problem: unclear labelling is source of medication errors; dosing devices for some psychotropic drugs create a risk of overdose; child-proof caps are often lacking; and too many patient information leaflets are misleading or difficult to understand. Everything that is needed for safe drug packaging is available; it is now up to regulatory agencies and drug companies to act responsibly. In the meantime, health professionals can help their patients by learning to identify the pitfalls of drug packaging and providing safe information to help prevent medication errors.

13 CFR 120.824 - Professional management and staff.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional management and staff. 120.824 Section 120.824 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS..., management, marketing, packaging, processing, closing, servicing or liquidation services provided by...

The Cultural Obstacles of Counseling Licensure in Hong Kong

ERIC Educational Resources Information Center

Lam, Gigi; Yeung, Marine

2017-01-01

A comprehensive package of counseling credentialism comprises certification, registration, and licensing. Counseling in Hong Kong adheres to certification for which diverse counseling master's programs exist. In addition, counselors can register as members of professional counseling organizations such as the Hong Kong Professional Counseling…

Evaluation of a co-delivered training package for community mental health professionals on service user- and carer-involved care planning.

PubMed

Grundy, A C; Walker, L; Meade, O; Fraser, C; Cree, L; Bee, P; Lovell, K; Callaghan, P

2017-08-01

WHAT IS KNOWN ON THE SUBJECT?: There is consistent evidence that service users and carers feel marginalized in the process of mental health care planning. Mental health professionals have identified ongoing training needs in relation to involving service users and carers in care planning. There is limited research on the acceptability of training packages for mental health professionals which involve service users and carers as co-facilitators. WHAT DOES THIS PAPER ADD TO EXISTING KNOWLEDGE?: A co-produced and co-delivered training package on service user- and carer-involved care planning was acceptable to mental health professionals. Aspects of the training that were particularly valued were the co-production model, small group discussion and the opportunity for reflective practice. The organizational context of care planning may need more consideration in future training models. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: Mental health nurses using co-production models of delivering training to other mental health professionals can be confident that such initiatives will be warmly welcomed, acceptable and engaging. On the basis of the results reported here, we encourage mental health nurses to use co-production approaches more often. Further research will show how clinically effective this training is in improving outcomes for service users and carers. Background There is limited evidence for the acceptability of training for mental health professionals on service user- and carer-involved care planning. Aim To investigate the acceptability of a co-delivered, two-day training intervention on service user- and carer-involved care planning. Methods Community mental health professionals were invited to complete the Training Acceptability Rating Scale post-training. Responses to the quantitative items were summarized using descriptive statistics (Miles, ), and qualitative responses were coded using content analysis (Weber, ). Results Of 350 trainees, 310 completed the questionnaire. The trainees rated the training favourably (median overall TARS scores = 56/63; median 'acceptability' score = 34/36; median 'perceived impact' score = 22/27). There were six qualitative themes: the value of the co-production model; time to reflect on practice; delivery preferences; comprehensiveness of content; need to consider organizational context; and emotional response. Discussion The training was found to be acceptable and comprehensive with participants valuing the co-production model. Individual differences were apparent in terms of delivery preferences and emotional reactions. There may be a need to further address the organizational context of care planning in future training. Implications for practice Mental health nurses should use co-production models of continuing professional development training that involve service users and carers as co-facilitators. © 2017 The Authors. Journal of Psychiatric and Mental Health Nursing Published by John Wiley & Sons Ltd.

Continuing professional development for volunteers working in palliative care in a tertiary care cancer institute in India: a cross-sectional observational study of educational needs.

PubMed

Deodhar, Jayita Kedar; Muckaden, Mary Ann

2015-01-01

Training programs for volunteers prior to their working in palliative care are well-established in India. However, few studies report on continuing professional development programs for this group. To conduct a preliminary assessment of educational needs of volunteers working in palliative care for developing a structured formal continuing professional development program for this group. Cross-sectional observational study conducted in the Department of Palliative Medicine of a tertiary care cancer institute in India. Participant volunteers completed a questionnaire, noting previous training, years of experience, and a comprehensive list of topics for inclusion in this program, rated in order of importance according to them. Descriptive statistics for overall data and Chi-square tests for categorical variables for group comparisons were applied using Statistical Package for Social Sciences version 18. Fourteen out of 17 volunteers completed the questionnaire, seven having 5-10-years experience in working in palliative care. A need for continuing professional development program was felt by all participants. Communication skills, more for children and elderly specific issues were given highest priority. Spiritual-existential aspects and self-care were rated lower in importance than psychological, physical, and social aspects in palliative care. More experienced volunteers (>5 years of experience) felt the need for self-care as a topic in the program than those with less (<5-years experience) (P < 0.05). Understanding palliative care volunteers' educational needs is essential for developing a structured formal continuing professional development program and should include self-care as a significant component.

The Roles of Knowledge Professionals for Knowledge Management.

ERIC Educational Resources Information Center

Kim, Seonghee

This paper starts by exploring the definition of knowledge and knowledge management; examples of acquisition, creation, packaging, application, and reuse of knowledge are provided. It then considers the partnership for knowledge management and especially how librarians as knowledge professionals, users, and technology experts can contribute to…

Using lifestyle analysis to develop wellness marketing strategies for IT professionals in India.

PubMed

Suresh, Sathya; Ravichandran, Swathi

2010-01-01

Revenues for the information technology (IT) industry have grown 10 times over the past decade in India. Although this growth has resulted in increased job opportunities, heavy workloads, unhealthy eating habits, and reduced family time are significant downfalls. To understand lifestyle choices of IT professionals, this study segmented and profiled wellness clients based on lifestyle. Data were collected from clients of five wellness centers. Cluster and discriminant analyses revealed four wellness consumer segments based on lifestyle. Results indicated a need for varying positioning approaches, segmentation, and marketing strategies suited for identified segments. To assist managers of wellness centers, four distinct packages were created that can be marketed to clients in the four segments.

Disordered Eating Cognitions as Predictors of Attitudes toward Seeking Professional Psychological Services

ERIC Educational Resources Information Center

Dotson, Keri B.; Masuda, Akihiko; Cohen, Lindsey L.

2011-01-01

The present study investigated whether young adults' disordered eating cognitions predicted attitudes toward seeking professional psychological services. Two hundred and eighty three 18- to 24-year-old undergraduate students completed a survey package that included measures of disordered eating cognitions and help-seeking attitudes. Hierarchical…

Designing CBE for Continuing Professional Education.

ERIC Educational Resources Information Center

Rees, Keith

Deakin Australia (DA) CBE (Continuing Business Education) programs are designed for use in conjunction with print and audio materials which are distributed as distance learning packages to business studies graduates working or planning to work as accountants, who are enrolled in the professional licensing program run by the Australian Society of…

The impact of a quality-improvement package on reproductive health services delivered by private providers in Uganda.

PubMed

Agha, Sohail

2010-09-01

This study assesses the effectiveness of a quality-improvement (QI) package designed to enable small-scale commercial reproductive health (RH) service providers to improve the services they offer. The study was conducted among midwives who are members of the Uganda Private Midwives Association. A pretest-post-test quasi-experimental panel study design was used wherein midwife clinics were allocated to two experimental groups and one control group. Baseline and follow-up measurements of structural and process attributes of quality were taken at the clinics by means of a facility inventory, interviews with midwives, and observations of client-provider interactions. Nearly 70 percent of the midwives who were trained to use the package reported that it was easy to use. Among clinics in which midwives received training in the use of the self-assessment tool and in developing action plans, structural and process attributes of quality improved only among those clinics in which the midwives' supervisors received training in finding solutions to the problems identified through self-assessments. The QI package may be implemented with small-scale private providers of RH services who are part of a professional association, network, or franchise that supervises their performance.

Are Different Professionals Ready to Support Children of Parents with Mental Illness? Evaluating the Impact of a Pan-European Training Programme.

PubMed

Viganò, Giovanni; Kaunonen, Marja; Ryan, Peter; Simpson, Wendy; Dawson, Ian; Tabak, Izabela; Scherbaum, Norbert; Poma, Stefano Zanone

2017-04-01

A training package (pre-tested in a pilot phase) about supporting children who have parents with a mental illness and/or with substance misuse (COPMI) was developed and delivered to 131 different professionals from six different European Countries. A questionnaire about importance, awareness and competence on the issue (8 items on knowledge and 15 items on skills) was developed and completed by participants before and after the training. The training was evaluated by participants as generally very successful in terms of improving the importance, awareness and competence of their knowledge and skills, with a statistically significant difference in the pre-/post-analyses (no decreases occurred). Different professional groups performed differently in the pre-training self-rating scores. The participants in some countries were mainly drawn from one professional group (i.e. teachers in Finland, social workers in Germany and psychologists in Poland). It was found that stigma was considered an extremely important concern even before the training, whilst country-specific legal issues were not taken into proper account in the training. Some possibilities for further refinement of the training programme are suggested.

Preparing mental health professionals for new directions in mental health practice: Evaluating the sensory approaches e-learning training package.

PubMed

Meredith, Pamela; Yeates, Harriet; Greaves, Amanda; Taylor, Michelle; Slattery, Maddy; Charters, Michelle; Hill, Melissa

2018-02-01

The application of sensory modulation approaches in mental health settings is growing in recognition internationally. However, a number of barriers have been identified as limiting the implementation of the approach, including workplace culture and a lack of accessible and effective sensory approaches training. The aim of this project was to investigate the efficacy of providing this training through a custom-designed e-learning package. Participants in the present study were predominately nurses and occupational therapists working in mental health settings in Queensland, Australia. Data were collected from 121 participants using an online survey. Significant improvements were found between pre- and post-training in participants' real and perceived levels of knowledge, their perceived levels of confidence, and their attitudes towards using sensory modulation approaches in mental health settings. The findings of the study suggest that the custom-designed sensory approaches e-learning package is an effective, accessible, acceptable, and usable method to train health professionals in sensory modulation approaches. As this study is the first to analyse the efficacy of an e-learning sensory approaches package, the results are considered preliminary, and further investigation is required. © 2017 Australian College of Mental Health Nurses Inc.

Supporting home care for the dying: an evaluation of healthcare professionals' perspectives of an individually tailored hospice at home service.

PubMed

Jack, Barbara A; Baldry, Catherine R; Groves, Karen E; Whelan, Alison; Sephton, Janice; Gaunt, Kathryn

2013-10-01

To explore health care professionals' perspective of hospice at home service that has different components, individually tailored to meet the needs of patients. Over 50% of adults diagnosed with a terminal illness and the majority of people who have cancer, prefer to be cared for and to die in their own home. Despite this, most deaths occur in hospital. Increasing the options available for patients, including their place of care and death is central to current UK policy initiatives. Hospice at home services aim to support patients to remain at home, yet there are wide variations in the design of services and delivery. A hospice at home service was developed to provide various components (accompanied transfer home, crisis intervention and hospice aides) that could be tailored to meet the individual needs of patients. An evaluation study. Data were collected from 75 health care professionals. District nurses participated in one focus group (13) and 31 completed an electronic survey. Palliative care specialist nurses participated in a focus group (9). One hospital discharge co-ordinator and two general practitioners participated in semi-structured interviews and a further 19 general practitioners completed the electronic survey. Health care professionals reported the impact and value of each of the components of the service, as helping to support patients to remain at home, by individually tailoring care. They also positively reported that support for family carers appeared to enable them to continue coping, rapid access to the service was suggested to contribute to faster hospital discharges and the crisis intervention service was identified as helping patients remain in their own home, where they wanted to be. Health care professionals perceived that the additional individualised support provided by this service contributed to enabling patients to continue be cared for and to die at home in their place of choice. This service offers various components of a hospice at home service, enabling a tailor made package to meet individual and local area needs. Developing an individually tailored package of care appears to be able to meet specific needs. © 2013 Blackwell Publishing Ltd.

Readability of medicinal package leaflets: a systematic review

PubMed Central

Pires, Carla; Vigário, Marina; Cavaco, Afonso

2015-01-01

OBJECTIVE To review studies on the readability of package leaflets of medicinal products for human use. METHODS We conducted a systematic literature review between 2008 and 2013 using the keywords “Readability and Package Leaflet” and “Readability and Package Insert” in the academic search engine Biblioteca do Conhecimento Online, comprising different bibliographic resources/databases. The preferred reporting items for systematic reviews and meta-analyses criteria were applied to prepare the draft of the report. Quantitative and qualitative original studies were included. Opinion or review studies not written in English, Portuguese, Italian, French, or Spanish were excluded. RESULTS We identified 202 studies, of which 180 were excluded and 22 were enrolled [two enrolling healthcare professionals, 10 enrolling other type of participants (including patients), three focused on adverse reactions, and 7 descriptive studies]. The package leaflets presented various readability problems, such as complex and difficult to understand texts, small font size, or few illustrations. The main methods to assess the readability of the package leaflet were usability tests or legibility formulae. Limitations with these methods included reduced number of participants; lack of readability formulas specifically validated for specific languages (e.g., Portuguese); and absence of an assessment on patients literacy, health knowledge, cognitive skills, levels of satisfaction, and opinions. CONCLUSIONS Overall, the package leaflets presented various readability problems. In this review, some methodological limitations were identified, including the participation of a limited number of patients and healthcare professionals, the absence of prior assessments of participant literacy, humor or sense of satisfaction, or the predominance of studies not based on role-plays about the use of medicines. These limitations should be avoided in future studies and be considered when interpreting the results. PMID:25741660

Readability of medicinal package leaflets: a systematic review.

PubMed

Pires, Carla; Vigário, Marina; Cavaco, Afonso

2015-01-01

OBJECTIVE To review studies on the readability of package leaflets of medicinal products for human use. METHODS We conducted a systematic literature review between 2008 and 2013 using the keywords "Readability and Package Leaflet" and "Readability and Package Insert" in the academic search engine Biblioteca do Conhecimento Online, comprising different bibliographic resources/databases. The preferred reporting items for systematic reviews and meta-analyses criteria were applied to prepare the draft of the report. Quantitative and qualitative original studies were included. Opinion or review studies not written in English, Portuguese, Italian, French, or Spanish were excluded. RESULTS We identified 202 studies, of which 180 were excluded and 22 were enrolled [two enrolling healthcare professionals, 10 enrolling other type of participants (including patients), three focused on adverse reactions, and 7 descriptive studies]. The package leaflets presented various readability problems, such as complex and difficult to understand texts, small font size, or few illustrations. The main methods to assess the readability of the package leaflet were usability tests or legibility formulae. Limitations with these methods included reduced number of participants; lack of readability formulas specifically validated for specific languages (e.g., Portuguese); and absence of an assessment on patients literacy, health knowledge, cognitive skills, levels of satisfaction, and opinions. CONCLUSIONS Overall, the package leaflets presented various readability problems. In this review, some methodological limitations were identified, including the participation of a limited number of patients and healthcare professionals, the absence of prior assessments of participant literacy, humor or sense of satisfaction, or the predominance of studies not based on role-plays about the use of medicines. These limitations should be avoided in future studies and be considered when interpreting the results.

Frosting on the cake: pictures on food packaging bias serving size.

PubMed

Brand, John; Wansink, Brian; Cohen, Abby

2016-08-01

Food packaging often pictures supplementary extras, such as toppings or frosting, that are not listed on the nutritional labelling. The present study aimed to assess if these extras might exaggerate how many calories† are pictured and if they lead consumers to overserve. Four studies were conducted in the context of fifty-one different cake mixes. For these cake mixes, Study 1 compared the calories stated on the nutrition label with the calories of the cake (and frosting) pictured on the box. In Studies 2, 3 and 4, undergraduates (Studies 2 and 3) or food-service professionals (Study 4) were given one of these typical cake mix boxes, with some being told that cake frosting was not included on the nutritional labelling whereas others were provided with no additional information. They were then asked to indicate what they believed to be a reasonable serving size of cake. Settings Laboratory setting. Undergraduate students and food-service professionals. Study 1 showed that the average calories of cake and frosting pictured on the package of fifty-one different cake mixes exceed the calories on the nutritional label by 134 %. Studies 2 and 3 showed that informing consumers that the nutritional information does not include frosting reduces how much people serve. Study 4 showed that even food-service professionals overserve if not told that frosting is not included on the nutritional labelling. To be less misleading, packaging should either not depict extras in its pictures or it should more boldly and clearly state that extras are not included in calorie counts.

Primary packaging considerations in developing medicines for children: oral liquid and powder for constitution.

PubMed

Campbell, Gossett A; Vallejo, Erick

2015-01-01

The packaging presentation of oral liquid pediatric medicines is a critical step in maintaining chemical and physical stability, compliance, adherence, and proper handling by the target patient population, guardians, caregivers, and health-care professionals. The common packaging presentations for commercial oral liquid pediatric drug products are glass bottle, plastic bottle, sachet, and stick pack configurations. The type of pack presentation selected is driven by the quality target product profile (QTPP) that is designed around the physicochemical properties of the drug substance and the desired drug product suitability for the target population. The QTPP defines the intended use of the drug product, drug product quality criteria, dose strength, dosage form, container closure system, storage conditions, stability criteria, dosing device, shelf life, and attributes affecting the pharmacokinetic characteristics. Oral liquid pediatric formulations are typically prepared from a powder that is constituted at the time of use as a suspension or a solution for single or multiple use depending on the stability of the constituted formulation. Active ingredients with high aqueous solubility can be developed as a powder for oral solution and presented in a bottle for multiple use product and a stick pack, packet, or sachet for single-use product. Active ingredients with low aqueous solubility can be developed as a powder for oral suspension and presented in a bottle for multiple use product and a stick pack or sachet for single-use product. A secondary package may be used in cases where the primary pack failed to provide adequate protection against light degradation. This work will help formulation scientists select the most appropriate pack presentation in the early stages of pediatric clinical development. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Patients' and practitioners' views on health behaviour change: a qualitative study.

PubMed

Elwell, Laura; Povey, Rachel; Grogan, Sarah; Allen, Candia; Prestwich, Andrew

2013-01-01

This study was designed to examine patients' and health professionals' perspectives on lifestyle behaviour change and to inform the development of a lifestyle behaviour change intervention to be used in primary care. Focus groups were conducted with seven patients and 13 health professionals where they were asked to discuss lifestyle behaviour change in relation to the design and development phase of a tailored lifestyle behaviour change intervention package. An inductive thematic analysis of transcripts suggested a range of issues that are relevant to the development and implementation of lifestyle change interventions such as time, lack of resources and starting interventions too late, as well as personal circumstances and the continuous effort that behaviour change requires. They were interpreted as two superordinate themes of 'internal and external influences on behaviour change' and 'behaviour change initiation and maintenance'. The results are discussed in relation to the implications they may have for researchers and health service commissioners designing interventions and practitioners implementing lifestyle change interventions in primary care. Many factors are involved in patients' and health care professionals' understanding of interventions and lifestyle behaviour change. These should be taken into consideration when designing interventions based on behaviour change theories.

Provide for Student Safety. Second Edition. Module E-5 of Category E--Instructional Management. Professional Teacher Education Module Series

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

One in a series of 127 performance-based teacher education learning packages focusing on specific professional competencies of vocational teachers, this learning module deals with providing for student safety. It consists of four learning experiences. Covered in the individual learning experiences are the following topics: providing for student…

Employ Simulation Techniques. Second Edition. Module C-5 of Category C--Instructional Execution. Professional Teacher Education Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

One of a series of performance-based teacher education learning packages focusing upon specific professional competencies of vocational teachers, this learning module deals with employing simulation techniques. It consists of an introduction and four learning experiences. Covered in the first learning experience are various types of simulation…

Comparing Recruitment and Retention Strategies for Rehabilitation Professionals among Hospital and Home Care Employers

PubMed Central

Tran, Diem; Davis, Aileen; McGillis Hall, Linda

2012-01-01

ABSTRACT Purpose: The objective of this study was to compare hospital and home care employers' rankings of both the importance and the feasibility of workforce strategies for recruiting and retaining rehabilitation professionals. Methods: An online self-administered questionnaire was distributed to all employers of rehabilitation professionals in Ontario hospitals (n=144) and Community Care Access Centre home care providers (n=34). Importance and feasibility rankings were based on the percentage of high ratings; 95% CIs were used to determine significant differences between hospital and home care rankings of recruitment and retention strategies. Results: The response rate was 50% (72/144) from hospitals and 73.5% (25/34) from home-care settings. The recruitment and retention strategies considered most important and feasible for rehabilitation therapists, regardless of setting, were communication between employer and worker, compensation packages, access to research, and professional development in budget planning. Tangible resources, support personnel, work safety, and marketing rehabilitation careers to high school students were ranked significantly higher by hospitals than by home care providers. Conclusions: Similarities exist between hospital and home care employers in terms of the importance and feasibility of recruitment and retention strategies for rehabilitation professionals. However, when developing a rehabilitation health human resources plan, the strategies identified as different between hospital and home care settings should be taken into account. PMID:23277683

Evaluation of CNT Energy Savers Retrofit Packages Implemented in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farley, Jenne; Ruch, Russell

This evaluation explored the feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25%-30% source energy savings through the study of three case studies. There is an urgent need to scale up energy efficiency retrofitting of Chicago's multifamily buildings in order to address rising energy costs and a rapidly depleting rental stock. Aimed at retrofit program administrators and building science professionals, this research project investigates the possibility of using prescriptive retrofit packages as a time- and resource-effective approach to the process of retrofitting multifamily buildings.

Evaluation of CNT Energy Savers Retrofit Packages Implemented in Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farley, Jenne; Ruch, Russell

This evaluation explored the feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25%-30% source energy savings through the study of three case studies. There is an urgent need to scale up energy efficiency retrofitting of Chicago's multifamily buildings in order to address rising energy costs and a rapidly depletingrental stock. Aimed at retrofit program administrators and building science professionals, this research project investigates the possibility of using prescriptive retrofit packages as a time- and resource-effective approach to the process of retrofitting multifamily buildings.

Primary Health Care Evaluation: the view of clients and professionals about the Family Health Strategy.

PubMed

da Silva, Simone Albino; Baitelo, Tamara Cristina; Fracolli, Lislaine Aparecida

2015-01-01

to evaluate the attributes of primary health care as for access; longitudinality; comprehensiveness; coordination; family counseling and community counseling in the Family Health Strategy, triangulating and comparing the views of stakeholders involved in the care process. evaluative research with a quantitative approach and cross-sectional design. Data collected using the Primary Care Assessment Tool for interviews with 527 adult clients, 34 health professionals, and 330 parents of children up to two years old, related to 33 family health teams, in eleven municipalities. Analysis conducted in the Statistical Package for Social Sciences software, with a confidence interval of 95% and error of 0.1. the three groups assessed the first contact access - accessibility with low scores. Professionals evaluated with a high score the other attributes. Clients assigned low score evaluations for the attributes: community counseling; family counseling; comprehensiveness - services rendered; comprehensiveness - available services. the quality of performance self-reported by the professionals of the Family Health Strategy is not perceived or valued by clients, and the actions and services may have been developed inappropriately or insufficiently to be apprehended by the experience of clients.

Stored product mites (Acari: Astigmata) infesting food in various types of packaging.

PubMed

Hubert, Jan; Nesvorna, Marta; Volek, Vlado

2015-02-01

From 2008 to 2014, stored product mites have been reported from prepackaged dried food on the market in the Czech Republic. The infestation was by Carpoglyphus lactis (L.) in dried fruits and Tyrophagus putrescentiae (Schrank) in dog feed. The infestation is presumably caused by poor protection of the packages. We compared various packaging methods for their resistance to mites using dried apricots and dog feed in laboratory experiments. The trial packages included nine different plastic films, monofilm, duplex and triplex, and one type of plastic cup (ten replicates per packaging type). All packaging materials are available on the Czech market for dried food products. The samples of dried food were professionally packed in a factory and packaged dried apricots were exposed to C. lactis and dog food to T. putrescentiae. After 3 months of exposure, the infestation and mite density of the prepackaged food was assessed. Mites were found to infest six types of packages. Of the packaging types with mites, 1-5 samples were infested and the maximum abundance was 1,900 mites g(-1) of dried food. Mites entered the prepackaged food by faulty sealing. Inadequate sealing is suggested to be the major cause of the emerged infestation of dried food.

Glossary

MedlinePlus

... instructions that come inside the box or package. Qualitative Test: A test that gives results in terms ... Federal, State & Local Officials Consumers Health Professionals Science & Research Industry Scroll back to top Popular Content Home ...

Drug packaging in 2013: small changes would reap big benefits.

PubMed

2014-05-01

Drug packaging is important both in protecting and informing patients. Some improvements were made in 2013, but many of the products examined by Prescrire still had poor-quality or even dangerous packaging. Problem packaging is a major concern for patients who are more vulnerable to adverse effects, particularly children and pregnant women. Several problems were noted with products intended for self-medication (umbrella brands), oral solutions sold with dosing devices, and injectable drugs. Looking back at 20 years of Red Cards that Prescrire has issued to products with dangerous packaging reveals several improvements, but too many dangers persist. Urgent action needs to be taken by regulatory agencies and drug companies: patient leaflets must be more explicit with regard to adverse effects, especially those of nonsteroidal anti-inflammatory drugs during pregnancy; accidental ingestion by children must be prevented; and companies must design safer dosing devices. Healthcare professionals and patients must remain vigilant and report all packaging issues to the relevant authorities.

Increasing home dialysis knowledge through a web-based e-learning program.

PubMed

Bennett, Paul N; Jaeschke, Sadie; Sinclair, Peter M; Kerr, Peter G; Holt, Steve; Schoch, Monica; Fortnum, Debbie; Ockerby, Cherene; Kent, Bridie

2014-06-01

There has been a global decline in the uptake of home-based dialysis therapies in the past 20 years. The ability to provide appropriate information to potential patients in this area may be confounded by a lack of knowledge of home dialysis options. The aim of this study was to develop a web-based education package for health professionals to increase knowledge and positive perceptions of home-based dialysis options. A three-module e-learning package concerning home dialysis was developed under the auspices of the home dialysis first project. These modules were tested on 88 undergraduate health professionals. Changes in attitudes and knowledge of home dialysis were measured using custom designed surveys administered electronically to students who completed the modules. Matched pre and post responses to the survey items were compared using Wilcoxon signed rank tests. The pre survey indicated clear deficits in existing knowledge of home dialysis options. In particular, when asked if haemodialysis could be performed at home, 22% of participants responded 'definitely no' and a further 24% responded 'probably no'. Upon completion of the e-learning, post survey responses indicated statistically significant improvements (P < 0.001) in eight of the nine items. When asked if the e-learning had increased their knowledge about home dialysis, 99% of participants responded 'definitely yes'. A suite of web-based education modules can successfully deliver significant improvements in awareness and knowledge around home dialysis therapies. © 2014 Asian Pacific Society of Nephrology.

An Old Wine in a New Bottle: Opportunities for Physical Educators to Package and Deliver It, not Just Stomp Grapes.

ERIC Educational Resources Information Center

Cardinal, Bradley J.

To avoid the "old wine" of the past and move toward the future, physical education professionals will have to document what they do and change the way they package and deliver it. In 1975 Public Law 93-641 was passed and a report of the U.S. Surgeon General was released which called for health promotion and disease prevention. The report…

2011 drug packaging review: too many dangers and too many patients overlooked.

PubMed

2012-05-01

Every year, Prescrire's analysis of drug packaging confirms the importance of taking packaging into account in assessing a drug's harm-benefit balance. Safe, tried and true options are available, yet the quality of most of the drug packaging Prescrire examined in 2011 left much to be desired. Few of the packaging items examined help prevent medication errors and many actually increase the risks: misleading and confusing labelling, dosing devices that create a risk of overdose, bottles without a child-proof cap, and inadequate or dangerous patient information leaflets. Umbrella brands continue to expand and are a potential source of medication errors. Some patients are at greater risk: the patient leaflets for NSAIDs endanger pregnant women and their unborn babies; children are insufficiently protected by paediatric packaging and are at risk due to the lack of child-proof caps on too many bottles. The raft of regulatory measures taken by the French drug regulatory agency (Afssaps) in the aftermath of the Mediator disaster overlooked the importance of packaging. Until drug regulatory agencies tackle the vast issue of drug packaging, it is up to healthcare professionals to protect patients from harm.

Haemodialysis patients' knowledge and beliefs about medication.

PubMed

Hooper, J M; Rainer, E; Banks, R A

1996-01-01

Patient adherence to treatment continues to concern health professionals. Non-adherence is costly to: a) the patient in terms of health, psychological well-being and quality of life, b) the health care providers in terms of individual professionalism, job satisfaction and the provision of optimum care packages, and c) the managers in terms of finance and service planning. Several factors are thought to be influential in treatment adherence.

Ada Quality and Style: Guidelines for Professional Programmers

DTIC Science & Technology

1989-01-01

Paes. Enter the total Block 7. Performing Organization Name(s) and number of pages.AccLpr., A). Self-explanatory. Block 16. Price.o de Enter...parts of typical header comment blocks. Including other, de facto extraneous or superfluous information is a waste of time. Most of the information...specification and to export only what is necessary for another unit to use the package properly. Visibility of objects such as DEFAULT.3IDT.t in package TEXTo

SimHap GUI: an intuitive graphical user interface for genetic association analysis.

PubMed

Carter, Kim W; McCaskie, Pamela A; Palmer, Lyle J

2008-12-25

Researchers wishing to conduct genetic association analysis involving single nucleotide polymorphisms (SNPs) or haplotypes are often confronted with the lack of user-friendly graphical analysis tools, requiring sophisticated statistical and informatics expertise to perform relatively straightforward tasks. Tools, such as the SimHap package for the R statistics language, provide the necessary statistical operations to conduct sophisticated genetic analysis, but lacks a graphical user interface that allows anyone but a professional statistician to effectively utilise the tool. We have developed SimHap GUI, a cross-platform integrated graphical analysis tool for conducting epidemiological, single SNP and haplotype-based association analysis. SimHap GUI features a novel workflow interface that guides the user through each logical step of the analysis process, making it accessible to both novice and advanced users. This tool provides a seamless interface to the SimHap R package, while providing enhanced functionality such as sophisticated data checking, automated data conversion, and real-time estimations of haplotype simulation progress. SimHap GUI provides a novel, easy-to-use, cross-platform solution for conducting a range of genetic and non-genetic association analyses. This provides a free alternative to commercial statistics packages that is specifically designed for genetic association analysis.

Development and evaluation of training resources to prepare health professionals for counselling pregnant women about non-invasive prenatal testing for Down syndrome: a mixed methods study.

PubMed

Oxenford, Kerry; Daley, Rebecca; Lewis, Celine; Hill, Melissa; Chitty, Lyn S

2017-04-27

The availability of non-invasive prenatal testing (NIPT) for aneuploidies is expanding rapidly throughout the world. Training health professionals to offer NIPT in a way that supports informed choice is essential for implementation. The aim of this study was to develop and evaluate a training package for health professionals to support the introduction of NIPT into clinical practice. Training on NIPT was offered to health professionals, primarily midwives, involved in Down syndrome screening and testing in eight hospitals located in England and Scotland as part of a research study evaluating the implementation of NIPT in the UK National Health Service. Training was evaluated using a mixed methods approach that included quantitative questionnaires at three time points and post-training qualitative interviews. The questionnaires measured confidence, self-perceived knowledge and actual knowledge about NIPT for Down syndrome. Interviews explored opinions about the training and experiences of offering NIPT. The training provided to the health professionals was found to positively impact on their confidence in discussing NIPT with women in their clinic, and both their perceived and actual knowledge and understanding of NIPT was improved. Knowledge remained weak in four areas; cell-free fetal DNA levels increase with gestation; turnaround time for NIPT results; cell-free fetal DNA is placental in origin; and NIPT false positive rate. Training materials, including a lesson plan, PowerPoint presentation and written factsheet on NIPT, have been developed and evaluated for use in educating midwives and supporting the introduction of NIPT. Implementation of training should include a greater focus on the areas where knowledge remained low. Some groups of midwives will need additional training or support to optimise their confidence in discussing NIPT with women.

Relationships between medical student burnout, empathy, and professionalism climate.

PubMed

Brazeau, Chantal M L R; Schroeder, Robin; Rovi, Sue; Boyd, Linda

2010-10-01

Medical student burnout is prevalent, and there has been much discussion about burnout and professionalism in medical education and the clinical learning environment. Yet, few studies have attempted to explore relationships between those issues using validated instruments. Medical students were surveyed at the beginning of their fourth year using the Maslach Burnout Inventory, the Jefferson Scale of Physician Empathy-Student Version, and the Professionalism Climate Instrument. The data were analyzed using Statistical Package for the Social Sciences, and Spearman correlation analysis was performed. Scores indicative of higher medical student burnout were associated with lower medical student empathy scores and with lower professionalism climate scores observed in medical students, residents, and faculty. Investigators observed relationships between medical student burnout, empathy, and professionalism climate. These findings may have implications for the design of curriculum interventions to promote student well-being and professionalism.

Distance education methods are useful for delivering education to palliative caregivers: A single-arm trial of an education package (PalliativE Caregivers Education Package).

PubMed

Forbat, Liz; Robinson, Rowena; Bilton-Simek, Rachel; Francois, Karemah; Lewis, Marsha; Haraldsdottir, Erna

2018-02-01

Face-to-face/group education for palliative caregivers is successful, but relies on caregivers travelling, being absent from the patient, and rigid timings. This presents inequities for those in rural locations. To design and test an innovative distance-learning educational package (PrECEPt: PalliativE Caregivers Education Package). Single-arm mixed-method feasibility proof-of-concept trial (ACTRN12616000601437). The primary outcome was carer self-efficacy, with secondary outcomes focused on caregiver preparedness and carer tasks/needs. Analysis focused on three outcome measures (taken at baseline and 6 weeks) and feasibility/acceptability qualitative data. A single specialist palliative care service. Eligible informal caregivers were those of patients registered with the outpatient or community service, where the patient had a prognosis of ⩾12 weeks, supporting someone with nutrition/hydration and/or pain management needs, proficient in English and no major mental health diagnosis. Two modules were developed and tested (nutrition/hydration and pain management) with 18 caregivers. The materials did not have a statistically significant impact on carer self-efficacy. However, statistically significant improvements were observed on the two subsidiary measures of (1) caregiving tasks, consequences and needs ( p = 0.03, confidence interval: 0.72, 9.4) and (2) caregiver preparedness ( p = 0.001, confidence interval: -1.22, -0.46). The study determined that distance learning is acceptable and feasible for both caregivers and healthcare professionals. Distance education improves caregiver preparedness and is a feasible and acceptable approach. A two-arm trial would determine whether the materials benefitted caregivers and patients compared to a control group not receiving the materials. Additional modules could be fruitfully developed and offered.

Reaching consensus: a review on sexual health training modules for professional capacity building.

PubMed

Karimian, Zahra; Azin, Seied Ali; Javid, Nasrin; Araban, Marzieh; Maasoumi, Raziyeh; Aghayan, Shahrokh; Merghati Khoie, Effat

2018-01-01

Background: Professional capacity building (PCB) is the focus point in health-related subjects.The present study was conducted to systematically review the existing sexual health training modules for health care providers. Methods: The following keywords were used to search: training, education, professional capacity, practitioner, sexual health, skill education, module, course, package and curriculum.The term MESH is referred to Medical Subject Headings and the following databases were investigated: MEDLINE, EMBASE, PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL), The Cochrane Library and Web of Science, Scopus, Google Scholar, SID,Magiran, and Iranmedex. All articles from 1980 to 2015 were extracted. Online modules were excluded. Considering that lesson plan was the basis of instruction, the modules were selected based on the characteristics of the lesson plans. Results: A total number of 38 published training modules in the field of sexuality we redetermined. In total, more than half of the modules (58%) were designed for medical doctor sand allied health professionals and the remaining (42%) were for nurses and midwives. Almost all the modules (97%) were introduced and utilized in developed countries, and only 3% were disseminated in developing countries. Conclusion: There are invaluable modules to build professional capacity in the field of sexual health. As a number of modules have been designed for nurses and midwifes, as the first-line health care providers, the use of these groups in sexual counseling and empowerment for sexual health is essential. No sexual health training program was designed in Iran. Therefore, designing such modules according to Iranian culture is strongly recommended.

Reaching consensus: a review on sexual health training modules for professional capacity building

PubMed Central

Karimian, Zahra; Azin, Seied Ali; Javid, Nasrin; Araban, Marzieh; Maasoumi, Raziyeh; Aghayan, Shahrokh; Merghati Khoie, Effat

2018-01-01

Background: Professional capacity building (PCB) is the focus point in health-related subjects.The present study was conducted to systematically review the existing sexual health training modules for health care providers. Methods: The following keywords were used to search: training, education, professional capacity, practitioner, sexual health, skill education, module, course, package and curriculum.The term MESH is referred to Medical Subject Headings and the following databases were investigated: MEDLINE, EMBASE, PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL), The Cochrane Library and Web of Science, Scopus, Google Scholar, SID,Magiran, and Iranmedex. All articles from 1980 to 2015 were extracted. Online modules were excluded. Considering that lesson plan was the basis of instruction, the modules were selected based on the characteristics of the lesson plans. Results: A total number of 38 published training modules in the field of sexuality we redetermined. In total, more than half of the modules (58%) were designed for medical doctor sand allied health professionals and the remaining (42%) were for nurses and midwives. Almost all the modules (97%) were introduced and utilized in developed countries, and only 3% were disseminated in developing countries. Conclusion: There are invaluable modules to build professional capacity in the field of sexual health. As a number of modules have been designed for nurses and midwifes, as the first-line health care providers, the use of these groups in sexual counseling and empowerment for sexual health is essential. No sexual health training program was designed in Iran. Therefore, designing such modules according to Iranian culture is strongly recommended. PMID:29423357

Operational safety assessment of turbo generators with wavelet Rényi entropy from sensor-dependent vibration signals.

PubMed

Zhang, Xiaoli; Wang, Baojian; Chen, Xuefeng

2015-04-16

With the rapid development of sensor technology, various professional sensors are installed on modern machinery to monitor operational processes and assure operational safety, which play an important role in industry and society. In this work a new operational safety assessment approach with wavelet Rényi entropy utilizing sensor-dependent vibration signals is proposed. On the basis of a professional sensor and the corresponding system, sensor-dependent vibration signals are acquired and analyzed by a second generation wavelet package, which reflects time-varying operational characteristic of individual machinery. Derived from the sensor-dependent signals' wavelet energy distribution over the observed signal frequency range, wavelet Rényi entropy is defined to compute the operational uncertainty of a turbo generator, which is then associated with its operational safety degree. The proposed method is applied in a 50 MW turbo generator, whereupon it is proved to be reasonable and effective for operation and maintenance.

Augmentative and Alternative Communication System (AAC) for Social Inclusion of People With Complex Communication Needs in the Industry.

PubMed

Krüger, Simone; Berberian, Ana Paula

2015-01-01

Inclusion of people with special needs in the labor market has been increasing in some regions of Brazil as a result of the Articles 6 and 7 of the Constitution of the Federal Republic of Brazil and the Quota Law (No. 8.213/91, Art. 93) which entitle people with disabilities to work in order to improve their social condition. To support persons with complex communication needs in the workplace, 40 graphic symbols termed "symbols of industrial expressions" were developed within the framework of the COMMUNIS package. The symbols were developed for a company of the food sector in the Metropolitan Region of Curitiba, Brazil. Individual interviews were held with the human resources professionals, as well as with employees with complex communication needs in order to identify problems, assess requirements, and generate a list of specific symbols to develop. The symbols were then validated with regard to their ease of recognition. Only five symbols needed revision. The results suggest that it is possible to develop a set of symbols for the workplace that are judged to be iconic by human resources professionals and employees with complex communication needs.

Helping dentists manage accounts receivable.

PubMed

Scott, J

2001-01-01

First Pacific Corporation (FPC) has worked with dental practices since 1961, providing personal services that optimize practice performance. In addition to being the premier service provider for administrative tasks in dental offices, they supply state-of-the-art hardware and accounts receivable management software. FPC designs and teaches practice development strategies, deliver on-site training, and much more. FPC is dedicated to the long-term professional success of dental clients, their staff, and their practices through a unique, integrated package of services. As a family-owned business, with headquarters in Salem, Oregon, FPC employs approximately two hundred staff who serve practices in twenty-two states.

Australian nursing and midwifery educators delivering evidence-based education in Tanzania: A qualitative study.

PubMed

Gower, Shelley; van den Akker, Jose; Jones, Mark; Dantas, Jaya A R; Duggan, Ravani

2016-05-01

Since 2011, Western Australian nursing and midwifery educators have been providing evidence-based continuing education to Tanzanian health professionals. Despite thorough preparation before departure, differences in local resource levels and available facilities have necessitated impromptu adaptation of curriculum content and delivery methods to ensure an effective program was delivered. This study explored the personal, cultural and teaching strategies utilised by Western Australian nursing and midwifery educators in Tanzania and examined if the transferability of education packages was influenced by the educators' cultural competence. Using a qualitative exploratory approach, data was collected from 15 Western Australian nursing and midwifery educators using a demographic survey and in-depth individual semi-structured interviews. The core themes identified from the analysis were Determination to learn, Assessing needs, Communication skills and Greater understanding. These findings are described using the conceptual framework of Campinha-Bacote's The Process of Cultural Competence in the Delivery of Healthcare Services. With appropriate levels of cultural competence, international health professionals can be effective at providing ongoing professional development to colleagues in developing country contexts, which may help address difficulties with retention and motivation of staff. It is essential that prior to departure cultural competence training is provided to educators to enhance their teaching capacity and effectiveness in international settings. Copyright © 2016 Elsevier Ltd. All rights reserved.

An intervention to stop smoking among patients suspected of TB--evaluation of an integrated approach.

PubMed

Siddiqi, Kamran; Khan, Amir; Ahmad, Maqsood; Shafiq-ur-Rehman

2010-03-25

In many low- and middle-income countries, where tobacco use is common, tuberculosis is also a major problem. Tobacco use increases the risk of developing tuberculosis, secondary mortality, poor treatment compliance and relapses. In countries with TB epidemic, even a modest relative risk leads to a significant attributable risk. Treating tobacco dependence, therefore, is likely to have benefits for controlling tuberculosis in addition to reducing the non-communicable disease burden associated with smoking. In poorly resourced health systems which face a dual burden of disease secondary to tuberculosis and tobacco, an integrated approach to tackle tobacco dependence in TB control could be economically desirable. During TB screening, health professionals come across large numbers of patients with respiratory symptoms, a significant proportion of which are likely to be tobacco users. These clinical encounters, considered to be "teachable moments", provide a window of opportunity to offer treatment for tobacco dependence. We aim to develop and trial a complex intervention to reduce tobacco dependence among TB suspects based on the WHO 'five steps to quit' model. This model relies on assessing personal motivation to quit tobacco use and uses it as the basis for assessing suitability for the different therapeutic options for tobacco dependence.We will use the Medical Research Council framework approach for evaluating complex interventions to: (a) design an evidence-based treatment package (likely to consist of training materials for health professionals and education tools for patients); (b) pilot the package to determine the delivery modalities in TB programme (c) assess the incremental cost-effectiveness of the package compared to usual care using a cluster RCT design; (d) to determine barriers and drivers to the provision of treatment of tobacco dependence within TB programmes; and (e) support long term implementation. The main outcomes to assess the effectiveness would be point abstinence at 4 weeks and continuous abstinence up to 6 months. This work will be carried out in Pakistan and is expected to have relevance for other low and middle income countries with high tobacco use and TB incidence. This will enhance our knowledge of the cost-effectiveness of treating tobacco dependence in patients suspected of TB. ISRCTN08829879.

ConcreteWorks v3 training/user manual (P1) : ConcreteWorks software (P2).

DOT National Transportation Integrated Search

2017-04-01

ConcreteWorks is designed to be a user-friendly software package that can help concrete : professionals optimize concrete mixture proportioning, perform a concrete thermal analysis, and : increase the chloride diffusion service life. The software pac...

SimHap GUI: An intuitive graphical user interface for genetic association analysis

PubMed Central

Carter, Kim W; McCaskie, Pamela A; Palmer, Lyle J

2008-01-01

Background Researchers wishing to conduct genetic association analysis involving single nucleotide polymorphisms (SNPs) or haplotypes are often confronted with the lack of user-friendly graphical analysis tools, requiring sophisticated statistical and informatics expertise to perform relatively straightforward tasks. Tools, such as the SimHap package for the R statistics language, provide the necessary statistical operations to conduct sophisticated genetic analysis, but lacks a graphical user interface that allows anyone but a professional statistician to effectively utilise the tool. Results We have developed SimHap GUI, a cross-platform integrated graphical analysis tool for conducting epidemiological, single SNP and haplotype-based association analysis. SimHap GUI features a novel workflow interface that guides the user through each logical step of the analysis process, making it accessible to both novice and advanced users. This tool provides a seamless interface to the SimHap R package, while providing enhanced functionality such as sophisticated data checking, automated data conversion, and real-time estimations of haplotype simulation progress. Conclusion SimHap GUI provides a novel, easy-to-use, cross-platform solution for conducting a range of genetic and non-genetic association analyses. This provides a free alternative to commercial statistics packages that is specifically designed for genetic association analysis. PMID:19109877

Seismic waveform modeling over cloud

NASA Astrophysics Data System (ADS)

Luo, Cong; Friederich, Wolfgang

2016-04-01

With the fast growing computational technologies, numerical simulation of seismic wave propagation achieved huge successes. Obtaining the synthetic waveforms through numerical simulation receives an increasing amount of attention from seismologists. However, computational seismology is a data-intensive research field, and the numerical packages usually come with a steep learning curve. Users are expected to master considerable amount of computer knowledge and data processing skills. Training users to use the numerical packages, correctly access and utilize the computational resources is a troubled task. In addition to that, accessing to HPC is also a common difficulty for many users. To solve these problems, a cloud based solution dedicated on shallow seismic waveform modeling has been developed with the state-of-the-art web technologies. It is a web platform integrating both software and hardware with multilayer architecture: a well designed SQL database serves as the data layer, HPC and dedicated pipeline for it is the business layer. Through this platform, users will no longer need to compile and manipulate various packages on the local machine within local network to perform a simulation. By providing users professional access to the computational code through its interfaces and delivering our computational resources to the users over cloud, users can customize the simulation at expert-level, submit and run the job through it.

Using reusable learning objects (rlos) in injection skills teaching: Evaluations from multiple user types.

PubMed

Williams, Julia; O'Connor, Mórna; Windle, Richard; Wharrad, Heather J

2015-12-01

Clinical skills are a critical component of pre-registration nurse education in the United Kingdom, yet there is widespread concern about the clinical skills displayed by newly-qualified nurses. Novel means of supporting clinical skills education are required to address this. A package of Reusable Learning Objects (RLOs) was developed to supplement pre-registration teaching on the clinical skill of administering injection medication. RLOs are electronic resources addressing a single learning objective whose interactivity facilitates learning. This article evaluates a package of five injection RLOs across three studies: (1) questionnaires administered to pre-registration nursing students at University of Nottingham (UoN) (n=46) evaluating the RLO package as a whole; (2) individual RLOs evaluated in online questionnaires by educators and students from UoN; from other national and international institutions; and healthcare professionals (n=265); (3) qualitative evaluation of the RLO package by UoN injection skills tutors (n=6). Data from all studies were assessed for (1) access to, (2) usefulness, (3) impact and (4) integration of the RLOs. Study one found that pre-registration nursing students rate the RLO package highly across all categories, particularly underscoring the value of their self-test elements. Study two found high ratings in online assessments of individual RLOs by multiple users. The global reach is particularly encouraging here. Tutors reported insufficient levels of student-RLO access, which might be explained by the timing of their student exposure. Tutors integrate RLOs into teaching and agree on their use as teaching supplements, not substitutes for face-to-face education. This evaluation encompasses the first years postpackage release. Encouraging data on evaluative categories in this early review suggest that future evaluations are warranted to track progress as the package is adopted and evaluated more widely. Copyright © 2015 Elsevier Ltd. All rights reserved.

Knowledge about persons with disability act (1995) among health care professionals dealing with persons affected by disabilities.

PubMed

Berry, B S; Devapitchai, K S; Raju, M S

2009-01-01

To assess the level of awareness about the different provisions of the persons with Disability Act (1995) among the health care professionals, 201 health care professionals dealing with the disabled persons from different parts of India were interviewed using structured interview checklist. The data were analysed through statistical package of social sciences software. Chi-square test were applied on the variables and the Pvalues were ascertained. The results show that 48.3% knew about administration hierarchy, 53.7% of respondents were aware of the free education available for the disabled, 68.5% were aware of the employment scheme, 62.7% about poverty alleviation schemes, 59.2% know about the traveling benefits, 56.2% of professionals were aware of the benefits for people with low vision. Only 29.9% of respondents knew about provisions to overcome architectural barriers. 43.8% of them knew about the least disability percentage whereas only 28.4% were aware of research and manpower schemes. Regarding affirmative action, 32.17% told correctly and 52.7% of the professionals responded correctly with respectto non- discrimination schemes. The level of awareness among the professionals working in rural regions is lower with regard to administration hierarchy and poverty alleviation schemes. Informations regarding disabled friendly environments and research and manpower development were found to be low among respondents of all professions which need to be effectively intervened. Gender did not show any influence with respect to the components of the act. The study showed that there is an ample need for educational interventions among the health care professionals in all socio-demography. Inclusion of PWD Act in the curriculum of medical schools as a topic in conferences and workshops for health care professionals are suggested.

A pilot randomised controlled trial to assess the utility of an e-learning package that trains users in adverse drug reaction causality.

PubMed

Conroy, Elizabeth J; Kirkham, Jamie J; Bellis, Jennifer R; Peak, Matthew; Smyth, Rosalind L; Williamson, Paula R; Pirmohamed, Munir

2015-12-01

Causality assessment of adverse drug reactions (ADRs) by healthcare professionals is often informal which can lead to inconsistencies in practice. The Liverpool Causality Assessment Tool (LCAT) offers a systematic approach. An interactive, web-based, e-learning package, the Liverpool ADR Causality Assessment e-learning Package (LACAeP), was designed to improve causality assessment using the LCAT. This study aimed to (1) get feedback on usability and usefulness on the LACAeP, identify areas for improvement and development, and generate data on effect size to inform a larger scale study; and (2) test the usability and usefulness of the LCAT. A pilot, single-blind, parallel-group, randomised controlled trial hosted by the University of Liverpool was undertaken. Participants were paediatric medical trainees at specialty training level 1+ within the Mersey and North-West England Deaneries. Participants were randomised (1 : 1) access to the LACAeP or no training. The primary efficacy outcome was score by correct classification, predefined by a multidisciplinary panel of experts. Following participation, feedback on both the LCAT and the LACAeP was obtained, via a built in survey, from participants. Of 57 randomised, 35 completed the study. Feedback was mainly positive although areas for improvement were identified. Seventy-four per cent of participants found the LCAT easy to use and 78% found the LACAeP training useful. Sixty-one per cent would be unlikely to recommend the training. Scores ranged from 4 to 13 out of 20. The LACAeP increased scores by 1.3, but this was not significant. Improving the LACAeP before testing it in an appropriately powered trial, informed by the differences observed, is required. Rigorous evaluation will enable a quality resource that will be of value in healthcare professional training. © 2015 The Authors. International Journal of Pharmacy Practice published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society.

A pilot randomised controlled trial to assess the utility of an e‐learning package that trains users in adverse drug reaction causality

PubMed Central

Kirkham, Jamie J.; Bellis, Jennifer R.; Peak, Matthew; Smyth, Rosalind L.; Williamson, Paula R.; Pirmohamed, Munir

2015-01-01

Abstract Objectives Causality assessment of adverse drug reactions (ADRs) by healthcare professionals is often informal which can lead to inconsistencies in practice. The Liverpool Causality Assessment Tool (LCAT) offers a systematic approach. An interactive, web‐based, e‐learning package, the Liverpool ADR Causality Assessment e‐learning Package (LACAeP), was designed to improve causality assessment using the LCAT. This study aimed to (1) get feedback on usability and usefulness on the LACAeP, identify areas for improvement and development, and generate data on effect size to inform a larger scale study; and (2) test the usability and usefulness of the LCAT. Methods A pilot, single‐blind, parallel‐group, randomised controlled trial hosted by the University of Liverpool was undertaken. Participants were paediatric medical trainees at specialty training level 1+ within the Mersey and North‐West England Deaneries. Participants were randomised (1 : 1) access to the LACAeP or no training. The primary efficacy outcome was score by correct classification, predefined by a multidisciplinary panel of experts. Following participation, feedback on both the LCAT and the LACAeP was obtained, via a built in survey, from participants. Key findings Of 57 randomised, 35 completed the study. Feedback was mainly positive although areas for improvement were identified. Seventy‐four per cent of participants found the LCAT easy to use and 78% found the LACAeP training useful. Sixty‐one per cent would be unlikely to recommend the training. Scores ranged from 4 to 13 out of 20. The LACAeP increased scores by 1.3, but this was not significant. Conclusions Improving the LACAeP before testing it in an appropriately powered trial, informed by the differences observed, is required. Rigorous evaluation will enable a quality resource that will be of value in healthcare professional training. PMID:26032626

The development of research tools used in the STORK Study (the Scottish Trial of Refer or Keep) to explore midwives' intrapartum decision making.

PubMed

Styles, Maggie; Cheyne, Helen; O'Carroll, Ronan; Greig, Fiona; Dagge-Bell, Fiona; Niven, Catherine

2011-10-01

to develop appropriate tools to assess midwives' attitudes and behaviour in relation to decision making involving risk. a questionnaire and series of vignettes were developed and testes to explore midwives' intrapartum decision making in relation to their attitudes towards risk. An innovative online computer package was developed specifically for use in the STORK Study which enabled the programme to be very tightly controlled with limited functions accessible to participants. a pilot study was conducted with over 50 midwives and nurses to ensure face and content validity of the vignettes and questionnaire. Initially designed to be a paper-based study, rigorous piloting highlighted the many difficulties in presenting it in that particular format. The solution to this problem was to develop the study as a secure online package. online data collection provided the researchers with a greater degree of control of the data collection process, not achievable using traditional paper survey methods. Another example of this control is the immediate entry of data from participants' responses to a background database which automatically stores and backs up data this means that no additional time is required for data entry. The cost of employing an information technology professional was easily offset by the financial savings made through the limited use of stationery and postage. although the development and testing of the research tools for the STORK Study was labour and time intensive, ultimately a questionnaire and vignette package was produced that had been rigorously tested by over 50 midwives and nurses. The researchers are confident in the reliability of the questionnaire and vignettes, as well as the validity of the data collected. The use of an online survey is clearly indicated when the population has readily available internet access, and where controlling the process of data collection is required, as such control cannot be achieved in traditional survey and questionnaire implementation. Copyright © 2010 Elsevier Ltd. All rights reserved.

Health Instruction Packages: Cardiac Anatomy.

ERIC Educational Resources Information Center

Phillips, Gwen; And Others

Text, illustrations, and exercises are utilized in these five learning modules to instruct nurses, students, and other health care professionals in cardiac anatomy and functions and in fundamental electrocardiographic techniques. The first module, "Cardiac Anatomy and Physiology: A Review" by Gwen Phillips, teaches the learner to draw…

Business Graphics

NASA Technical Reports Server (NTRS)

1987-01-01

Genigraphics Corporation's Masterpiece 8770 FilmRecorder is an advanced high resolution system designed to improve and expand a company's in-house graphics production. GRAFTIME/software package was designed to allow office personnel with minimal training to produce professional level graphics for business communications and presentations. Products are no longer being manufactured.

Cabbages and condoms: packaging and channels of distribution.

PubMed

Potts, M

1984-12-01

Contraception is only rarely a therapy for disease. Usually, contraceptives help adults implement informed choices. Therefore, wider channels of distribution and promotion are possible and necessary than in the case of curative therapies. The more channels of distribution that are available for the same method of contraception, the higher the prevalence of use. Establishing new channels of distribution can be as important as developing new methods of contraception. Family planning is an important element in public health, and active promotion enhances the health of individuals and physicians. Other health professionals need to understand the role of non-medical skills and channels of contraceptive distribution.

Drug packaging in 2015: risky industry choices and lax regulation.

PubMed

2016-06-01

Prescrire examined the packaging quality of 240 drugs in 2015. No new advances were identified, but drug packaging continues to expose patients to a variety of dangers. Some past advances persist: for example, INNs are often more legible, and recent patient leaflets tend to be clearer and more informative. But these measures are not applied to all drugs, and are rarely applied retroactively to older drugs. The overall picture in 2015 is that many drugs are difficult to identify, risky or downright dangerous to prepare, or supplied with patient leaflets that fail to correctly inform patients about their medication. And measures to prevent drug poisoning in children need to be completely rethought. It is high time for regulators and policy makers to take the issue of drug packaging seriously, so blatant are the signs of their failure to do so: the increasing use of bulk bottles for new drugs; failure to implement guidelines on safe drug packaging (unit-dose presentations, appropriate dosing devices, etc.); and expanding umbrella brands which, given the dangers they pose to patients, should be banned instead. All things considered, healthcare professionals and patients must remain vigilant and report any dangers they identify. A major European initiative on drug packaging is becoming increasingly necessary.

29 CFR 516.3 - Bona fide executive, administrative, and professional employees (including academic...

Code of Federal Regulations, 2010 CFR

2010-07-01

... information and data required by § 516.2(a) except paragraphs (a) (6) through (10) and, in addition, the basis... appropriate addenda such as “plus hospitalization and insurance plan A,” “benefit package B,” “2 weeks paid...

29 CFR 516.3 - Bona fide executive, administrative, and professional employees (including academic...

Code of Federal Regulations, 2012 CFR

2012-07-01

... information and data required by § 516.2(a) except paragraphs (a) (6) through (10) and, in addition, the basis... appropriate addenda such as “plus hospitalization and insurance plan A,” “benefit package B,” “2 weeks paid...

29 CFR 516.3 - Bona fide executive, administrative, and professional employees (including academic...

Code of Federal Regulations, 2014 CFR

2014-07-01

... information and data required by § 516.2(a) except paragraphs (a) (6) through (10) and, in addition, the basis... appropriate addenda such as “plus hospitalization and insurance plan A,” “benefit package B,” “2 weeks paid...

29 CFR 516.3 - Bona fide executive, administrative, and professional employees (including academic...

Code of Federal Regulations, 2011 CFR

2011-07-01

... information and data required by § 516.2(a) except paragraphs (a) (6) through (10) and, in addition, the basis... appropriate addenda such as “plus hospitalization and insurance plan A,” “benefit package B,” “2 weeks paid...

29 CFR 516.3 - Bona fide executive, administrative, and professional employees (including academic...

Code of Federal Regulations, 2013 CFR

2013-07-01

... information and data required by § 516.2(a) except paragraphs (a) (6) through (10) and, in addition, the basis... appropriate addenda such as “plus hospitalization and insurance plan A,” “benefit package B,” “2 weeks paid...

Hera - The HEASARC's New Data Analysis Service

NASA Technical Reports Server (NTRS)

Pence, William

2006-01-01

Hera is the new computer service provided by the HEASARC at the NASA Goddard Space Flight Center that enables qualified student and professional astronomical researchers to immediately begin analyzing scientific data from high-energy astrophysics missions. All the necessary resources needed to do the data analysis are freely provided by Hera, including: * the latest version of the hundreds of scientific analysis programs in the HEASARC's HEASOFT package, as well as most of the programs in the Chandra CIAO package and the XMM-Newton SAS package. * high speed access to the terabytes of data in the HEASARC's high energy astrophysics Browse data archive. * a cluster of fast Linw workstations to run the software * ample local disk space to temporarily store the data and results. Some of the many features and different modes of using Hera are illustrated in this poster presentation.

An integrative review of e-learning in the delivery of self-management support training for health professionals.

PubMed

Lawn, Sharon; Zhi, Xiaojuan; Morello, Andrea

2017-10-10

E-learning involves delivery of education through Information and Communication Technology (ITC) using a wide variety of instructional designs, including synchronous and asynchronous formats. It can be as effective as face-to-face training for many aspects of health professional training. There are, however, particular practices and skills needed in providing patient self-management support, such as partnering with patients in goal-setting, which may challenge conventional practice norms. E-learning for the delivery of self-management support (SMS) continuing education to existing health professionals is a relatively new and growing area with limited studies identifying features associated with best acquisition of skills in self-management support. An integrative literature review examined what is known about e-learning for self-management support. This review included both qualitative and quantitative studies that focused on e-learning provided to existing health professionals for their continuing professional development. Papers were limited to those published in English between 2006 and 2016. Content analysis was used to organize and focus and describe the findings. The search returned 1505 articles, with most subsequently excluded based on their title or abstract. Fifty-two full text articles were obtained and checked, with 42 excluded because they did not meet the full criteria. Ten peer-reviewed articles were included in this review. Seven main themes emerged from the content analysis: participants and professions; time; package content; guiding theoretical framework; outcome measures; learning features or formats; and learning barriers. These themes revealed substantial heterogeneity in instructional design and other elements of e-learning applied to SMS, indicating that there is still much to understand about how best to deliver e-learning for SMS skills development. Few e-learning approaches meet the need for high levels of interactivity, reflection, practice and application to practice for health professionals learning to deliver effective SMS. Findings suggest that the context of SMS for patients with chronic condition matters to how health professional training is delivered, to ensure partnership and person-centred care. Further creative approaches and their rigorous evaluation are needed to deliver completely online learning in this space. Blended learning that combines e-learning and face-to-face methods is suggested to support SMS skills development for health professionals.

What is best practice in sex and relationship education? A synthesis of evidence, including stakeholders’ views

PubMed Central

Pound, Pandora; Denford, Sarah; Shucksmith, Janet; Tanton, Clare; Johnson, Anne M; Owen, Jenny; Hutten, Rebecca; Mohan, Leanne; Bonell, Chris; Abraham, Charles; Campbell, Rona

2017-01-01

Objectives Sex and relationship education (SRE) is regarded as vital to improving young people’s sexual health, but a third of schools in England lacks good SRE and government guidance is outdated. We aimed to identify what makes SRE programmes effective, acceptable, sustainable and capable of faithful implementation. Design This is a synthesis of findings from five research packages that we conducted (practitioner interviews, case study investigation, National Survey of Sexual Attitudes and Lifestyles, review of reviews and qualitative synthesis). We also gained feedback on our research from stakeholder consultations. Settings Primary research and stakeholder consultations were conducted in the UK. Secondary research draws on studies worldwide. Results Our findings indicate that school-based SRE and school-linked sexual health services can be effective at improving sexual health. We found professional consensus that good programmes start in primary school. Professionals and young people agreed that good programmes are age-appropriate, interactive and take place in a safe environment. Some young women reported preferring single-sex classes, but young men appeared to want mixed classes. Young people and professionals agreed that SRE should take a ‘life skills’ approach and not focus on abstinence. Young people advocated a ‘sex-positive’ approach but reported this was lacking. Young people and professionals agreed that SRE should discuss risks, but young people indicated that approaches to risk need revising. Professionals felt teachers should be involved in SRE delivery, but many young people reported disliking having their teachers deliver SRE and we found that key messages could become lost when interpreted by teachers. The divergence between young people and professionals was echoed by stakeholders. We developed criteria for best practice based on the evidence. Conclusions We identified key features of effective and acceptable SRE. Our best practice criteria can be used to evaluate existing programmes, contribute to the development of new programmes and inform consultations around statutory SRE. PMID:28669970

Operational Safety Assessment of Turbo Generators with Wavelet Rényi Entropy from Sensor-Dependent Vibration Signals

PubMed Central

Zhang, Xiaoli; Wang, Baojian; Chen, Xuefeng

2015-01-01

With the rapid development of sensor technology, various professional sensors are installed on modern machinery to monitor operational processes and assure operational safety, which play an important role in industry and society. In this work a new operational safety assessment approach with wavelet Rényi entropy utilizing sensor-dependent vibration signals is proposed. On the basis of a professional sensor and the corresponding system, sensor-dependent vibration signals are acquired and analyzed by a second generation wavelet package, which reflects time-varying operational characteristic of individual machinery. Derived from the sensor-dependent signals’ wavelet energy distribution over the observed signal frequency range, wavelet Rényi entropy is defined to compute the operational uncertainty of a turbo generator, which is then associated with its operational safety degree. The proposed method is applied in a 50 MW turbo generator, whereupon it is proved to be reasonable and effective for operation and maintenance. PMID:25894934

SU-F-E-16: A Specific Training Package for Medical Physicists in Support to Nuclear and Radiological Emergency Situations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meghzifene, A; Berris, T

Purpose: To provide the professional medical physicists with adequate competencies and skills in order to help them get prepared to support Nuclear or Radiological Emergency (NRE) situations. Methods: Although clinical medical physicists working have in-depth knowledge in radiation dosimetry, including dose reconstruction and dose measurements, they are usually not involved in NRE situations. However, in a few instances where medical physicists were involved in NREs, it appeared that many lacked specific knowledge and skills that are required in such situations. This lack of specific knowledge and skills is probably due to the fact that most current medical physics curricula domore » not include a specific module on this topic. As a response to this finding, the IAEA decided to initiate a project to develop a specific training package to help prepare medical physicists to support NRE situations. The training package was developed with the kind support of the Government of Japan and in collaboration with Fukushima Medical University (FMU) and the National Institute of Radiological Sciences (NIRS). Results: The first International Workshop to test the training package was held in Fukushima, Japan in June 2015. It consisted of lectures, demonstrations, simulation, role play, and practical sessions followed by discussions. The training was delivered through 14 modules which were prepared with the support of 12 lecturers. A knowledge assessment test was done before the workshop, followed by the same test done at the end of the Workshop, to assess the knowledge acquired during the training. Conclusion: The Workshop was successfully implemented. The overall rating of the workshop by the participants was excellent and all participants reported that they acquired a good understanding of the main issues that are relevant to medical physics support in case of NRE situations. They are expected to disseminate the knowledge to other medical physicists in their countries.« less

Foods and Families Learning Package: An Educational Supplement to Early Childhood News.

ERIC Educational Resources Information Center

General Mills, Inc., Minneapolis, Minn.

This resource guide for the early childhood professional contains creative art activities, active learning experiences, interactive bulletin boards, teacher-made materials, simple cooking projects, inviting fingerplays, songs, and music. The activities are planned to stimulate children's curiosity and senses. Through experiencing these activities,…

Determining the Impact of Family Programs upon Retention: Why Successful Officers Stay.

DTIC Science & Technology

1986-05-12

officers in their bracket . Note that Category II variables were thought to have neutral, or no effect upon retention. Somewhat unexpectedly they proved...packages for instance, dental and orthodontics for dependants. - Believe most of us that achieve this level - are professionals - attraction to stay

77 FR 42335 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

...)(1); or (C) An affirmative final determination of material injury or threat thereof under section 705... Feature Mastering, Ajilon Professional Staffing and Kforce. 81,354 ALCOA, Inc., Global Alcoa, TN Packaging... are covered by active certifications. Consequently, further investigation in these cases would serve...

The Women, Infants, and Children food package and 100% fruit juice

USDA-ARS?s Scientific Manuscript database

For those of us who are professionally concerned with infant and childhood nutrition, the nutritional support of our most vulnerable infants, children, and their families is a very high priority. Therefore, it is most important to continue to examine and improve the Women, Infants, and Children (WIC...

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

NASA Technical Reports Server (NTRS)

Shalkhauser, K. A.; Li, K.; Shih, Y. C.

1992-01-01

Packaging schemes were developed that provide low-loss, hermetic enclosure for advanced monolithic microwave and millimeter-wave integrated circuits (MMICs). The package designs are based on a fused quartz substrate material that offers improved radio frequency (RF) performance through 44 gigahertz (GHz). The small size and weight of the packages make them appropriate for a variety of applications, including phased array antenna systems. Packages were designed in two forms; one for housing a single MMIC chip, the second in the form of a multi-chip phased array module. The single chip array module was developed in three separate sizes, for chips of different geometry and frequency requirements. The phased array module was developed to address packaging directly for antenna applications, and includes transmission line and interconnect structures to support multi-element operation. All packages are fabricated using fused quartz substrate materials. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices. The package and test fixture designs were both developed in a generic sense, optimizing performance for a wide range of possible applications and devices.

Sustainable Library Development Training Package

ERIC Educational Resources Information Center

Peace Corps, 2012

2012-01-01

This Sustainable Library Development Training Package supports Peace Corps' Focus In/Train Up strategy, which was implemented following the 2010 Comprehensive Agency Assessment. Sustainable Library Development is a technical training package in Peace Corps programming within the Education sector. The training package addresses the Volunteer…

Interference Analysis Status and Plans for Aeronautical Mobile Airport Communications System (AeroMACS)

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Wilson, Jeffrey D.

2010-01-01

Interference issues related to the operation of an aeronautical mobile airport communications system (AeroMACS) in the C-Band (specifically 5091-5150 MHz) is being investigated. The issue of primary interest is co-channel interference from AeroMACS into mobile-satellite system (MSS) feeder uplinks. The effort is focusing on establishing practical limits on AeroMACS transmissions from airports so that the threshold of interference into MSS is not exceeded. The analyses are being performed with the software package Visualyse Professional, developed by Transfinite Systems Limited. Results with omni-directional antennas and plans to extend the models to represent AeroMACS more accurately will be presented. These models should enable realistic analyses of emerging AeroMACS designs to be developed from NASA Test Bed, RTCA 223, and European results.

Green Packaging Management of Logistics Enterprises

NASA Astrophysics Data System (ADS)

Zhang, Guirong; Zhao, Zongjian

From the connotation of green logistics management, we discuss the principles of green packaging, and from the two levels of government and enterprises, we put forward a specific management strategy. The management of green packaging can be directly and indirectly promoted by laws, regulations, taxation, institutional and other measures. The government can also promote new investment to the development of green packaging materials, and establish specialized institutions to identify new packaging materials, standardization of packaging must also be accomplished through the power of the government. Business units of large scale through the packaging and container-based to reduce the use of packaging materials, develop and use green packaging materials and easy recycling packaging materials for proper packaging.

An intervention to stop smoking among patients suspected of TB - evaluation of an integrated approach

PubMed Central

2010-01-01

Background In many low- and middle-income countries, where tobacco use is common, tuberculosis is also a major problem. Tobacco use increases the risk of developing tuberculosis, secondary mortality, poor treatment compliance and relapses. In countries with TB epidemic, even a modest relative risk leads to a significant attributable risk. Treating tobacco dependence, therefore, is likely to have benefits for controlling tuberculosis in addition to reducing the non-communicable disease burden associated with smoking. In poorly resourced health systems which face a dual burden of disease secondary to tuberculosis and tobacco, an integrated approach to tackle tobacco dependence in TB control could be economically desirable. During TB screening, health professionals come across large numbers of patients with respiratory symptoms, a significant proportion of which are likely to be tobacco users. These clinical encounters, considered to be "teachable moments", provide a window of opportunity to offer treatment for tobacco dependence. Methods/Design We aim to develop and trial a complex intervention to reduce tobacco dependence among TB suspects based on the WHO 'five steps to quit' model. This model relies on assessing personal motivation to quit tobacco use and uses it as the basis for assessing suitability for the different therapeutic options for tobacco dependence. We will use the Medical Research Council framework approach for evaluating complex interventions to: (a) design an evidence-based treatment package (likely to consist of training materials for health professionals and education tools for patients); (b) pilot the package to determine the delivery modalities in TB programme (c) assess the incremental cost-effectiveness of the package compared to usual care using a cluster RCT design; (d) to determine barriers and drivers to the provision of treatment of tobacco dependence within TB programmes; and (e) support long term implementation. The main outcomes to assess the effectiveness would be point abstinence at 4 weeks and continuous abstinence up to 6 months. Discussion This work will be carried out in Pakistan and is expected to have relevance for other low and middle income countries with high tobacco use and TB incidence. This will enhance our knowledge of the cost-effectiveness of treating tobacco dependence in patients suspected of TB. Trial Registration Trial Registration Number: ISRCTN08829879 PMID:20338041

A Novel Dietary Assessment Method to Measure a Healthy and Sustainable Diet Using the Mobile Food Record: Protocol and Methodology.

PubMed

Harray, Amelia J; Boushey, Carol J; Pollard, Christina M; Delp, Edward J; Ahmad, Ziad; Dhaliwal, Satvinder S; Mukhtar, Syed Aqif; Kerr, Deborah A

2015-07-03

The world-wide rise in obesity parallels growing concerns of global warming and depleting natural resources. These issues are often considered separately but there may be considerable benefit to raising awareness of the impact of dietary behaviours and practices on the food supply. Australians have diets inconsistent with recommendations, typically low in fruit and vegetables and high in energy-dense nutrient-poor foods and beverages (EDNP). These EDNP foods are often highly processed and packaged, negatively influencing both health and the environment. This paper describes a proposed dietary assessment method to measure healthy and sustainable dietary behaviours using 4-days of food and beverage images from the mobile food record (mFR) application. The mFR images will be assessed for serves of fruit and vegetables (including seasonality), dairy, eggs and red meat, poultry and fish, ultra-processed EDNP foods, individually packaged foods, and plate waste. A prediction model for a Healthy and Sustainable Diet Index will be developed and tested for validity and reliability. The use of the mFR to assess adherence to a healthy and sustainable diet is a novel and innovative approach to dietary assessment and will have application in population monitoring, guiding intervention development, educating consumers, health professionals and policy makers, and influencing dietary recommendations.

feedr and animalnexus.ca: A paired R package and user-friendly Web application for transforming and visualizing animal movement data from static stations.

PubMed

LaZerte, Stefanie E; Reudink, Matthew W; Otter, Ken A; Kusack, Jackson; Bailey, Jacob M; Woolverton, Austin; Paetkau, Mark; de Jong, Adriaan; Hill, David J

2017-10-01

Radio frequency identification (RFID) provides a simple and inexpensive approach for examining the movements of tagged animals, which can provide information on species behavior and ecology, such as habitat/resource use and social interactions. In addition, tracking animal movements is appealing to naturalists, citizen scientists, and the general public and thus represents a tool for public engagement in science and science education. Although a useful tool, the large amount of data collected using RFID may quickly become overwhelming. Here, we present an R package (feedr) we have developed for loading, transforming, and visualizing time-stamped, georeferenced data, such as RFID data collected from static logger stations. Using our package, data can be transformed from raw RFID data to visits, presence (regular detections by a logger over time), movements between loggers, displacements, and activity patterns. In addition, we provide several conversion functions to allow users to format data for use in functions from other complementary R packages. Data can also be visualized through static or interactive maps or as animations over time. To increase accessibility, data can be transformed and visualized either through R directly, or through the companion site: http://animalnexus.ca, an online, user-friendly, R-based Shiny Web application. This system can be used by professional and citizen scientists alike to view and study animal movements. We have designed this package to be flexible and to be able to handle data collected from other stationary sources (e.g., hair traps, static very high frequency (VHF) telemetry loggers, observations of marked individuals in colonies or staging sites), and we hope this framework will become a meeting point for science, education, and community awareness of the movements of animals. We aim to inspire citizen engagement while simultaneously enabling robust scientific analysis.

[European Union Network for Patient Safety and Quality of Care (PASQ). Development and preliminary results in Europe and in the Spanish National Health System].

PubMed

Agra-Varela, Y; Fernández-Maíllo, M; Rivera-Ariza, S; Sáiz-Martínez-Acitorez, I; Casal-Gómez, J; Palanca-Sánchez, I; Bacou, J

2015-01-01

The joint action, European Union Network for Patient Safety and Quality of Care: PaSQ, aims to promote patient safety (PS) in the European Union (EU) and to facilitate the exchange of experiences among Member States (MS) and stakeholders on issues related to quality of care, PS, and patient involvement. The development and preliminary results are presented here, especially as regards the Spanish National Health System (SNHS). PaSQ is developed through 7 work packages, primarily aimed at sharing good practices (GP), which were identified using specific questionnaires and selected by means of explicit criteria, as well as to implement safe clinical practices (SCP) of proven effectiveness and agreed among MS. A total of 482 GP (39% provided by Spanish professionals) were identified. The 34 events organised in the EU, 11 including Spanish participation, facilitate sharing these practices. A total of 194 Health Care centres (49% in Spain) are implementing SCP (hand hygiene, safe surgery, medication reconciliation, and paediatric early warning scores) ACHIEVEMENTS AND FUTURE PERSPECTIVES: PaSQ is making it possible to strengthen collaboration between organizations and professionals at EU and SNHS level regarding PS and quality of care. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

The Indigenous Counselling and Nicotine (ICAN) QUIT in Pregnancy Pilot Study protocol: a feasibility step-wedge cluster randomised trial to improve health providers' management of smoking during pregnancy

PubMed Central

Bonevski, Billie; Bovill, Michelle; Gruppetta, Maree; Oldmeadow, Chris; Palazzi, Kerrin; Atkins, Lou; Reath, Jennifer

2017-01-01

Introduction Indigenous women have the highest smoking prevalence during pregnancy (47%) in Australia. Health professionals report lack of knowledge, skills and confidence to effectively manage smoking among pregnant women in general. We developed a behaviour change intervention aimed to improve health professionals’ management of smoking in Indigenous pregnant women—the Indigenous Counselling And Nicotine (ICAN) QUIT in Pregnancy. This intervention includes webinar training for health professionals, an educational resources package for health professionals and pregnant women, free oral nicotine replacement therapy (NRT) for pregnant women, and audit and feedback on health professionals' performance. The aim of this study is to test the feasibility and acceptability of the ICAN QUIT in Pregnancy intervention to improve health professionals' provision of evidence-based culturally responsive smoking cessation care to Australian Indigenous pregnant smokers. Methods and analysis This protocol describes the design of a step-wedge cluster randomised pilot study. Six Aboriginal Medical Services (AMSs) are randomised into three clusters. Clusters receive the intervention staggered by 1 month. Health professionals report on their knowledge and skills pretraining and post-training and at the end of the study. Pregnant women are recruited and followed up for 3 months. The primary outcome is the recruitment rate of pregnant women. Secondary outcomes include feasibility of recruitment and follow-up of participating women, and webinar training of health professionals, measured using a designated log; and measures of effectiveness outcomes, including quit rates and NRT prescription rates. Ethics and dissemination In accordance with the Aboriginal Health and Medical Research Council guidelines, this study has been developed in collaboration with a Stakeholder and Consumer Aboriginal Advisory Panel (SCAAP). The SCAAP provides cultural consultation, advice and direction to ensure that implementation is acceptable and respectful to the Aboriginal communities involved. Results will be disseminated to AMSs, Aboriginal communities and national Aboriginal bodies. Registration details This protocol (version 4, 14 October 2016) is registered with the Australian and New Zealand Clinical Trials Registry (Ref #: ACTRN12616001603404). PMID:28780551

Comparison of expectations and beliefs about good teaching in an academic day release medical education program: a qualitative study.

PubMed

van Roermund, Thea A C M; Mokkink, Henk G; Bottema, Ben J A M; van Weel, Chris; Scherpbier, Albert J J A

2014-10-03

In a professional learner-centered(ness) educational environment, communication and alignment of expectations about teaching are indispensable. Professional education of residents could benefit from an analysis and comparison of teachers' and residents' educational expectations and beliefs. Our purpose is to identify success factors and barriers related to aligning expectations and beliefs and building a supportive professional learner-centered educational environment. We conducted semi-structured individual interviews with teachers and semi-structured focus groups with residents. A single interview format was used to make it possible to compare the results. Data were analysed using a qualitative software package (AtlasTi). Data analysis steps were followed by the author team, which identified four domains of good teaching: personal traits, knowledge, relationships and teaching qualities. Teachers and residents agreed about the importance of personal professional characteristics like being a role model and having an open and enthusiastic attitude. They all thought that having a specific knowledge base was essential for teaching. Approaching residents as adult learners was found to be an important element of the learner-centred environment and it was agreed that teachers should take practical experiences to a higher level. However, teachers and residents had different expectations about the practical consequences of being a role model, adult learning, coaching and openness, and the type of knowledge that was needed in the professional development program. Communication about different expectations appeared to be difficult. Teachers and residents agreed on a conceptual level about expectations and beliefs regarding good teaching, but disagreed on an executive level. According to the residents, the disagreement about good teaching was not the biggest barrier to creating alignment and a supportive professional relationship; instead, it was the absence of a proper dialogue regarding issues about expectations and beliefs.

Health Instruction Packages: Dental Personnel.

ERIC Educational Resources Information Center

Hayes, Gary E.; And Others

Text, illustrations, and exercises are utilized in this set of four learning modules designed to instruct non-professional dental personnel in selected job-related skills. The first module, by Gary E. Hayes, describes how to locate the hinge axis point of the jaw, place and secure a bitefork, and perform a facebow transfer. The second module,…

Does Generosity Beget Generosity? Alumni Giving and Undergraduate Financial Aid

ERIC Educational Resources Information Center

Meer, Jonathan; Rosen, Harvey S.

2012-01-01

We investigate how undergraduates' financial aid packages affect their subsequent donative behavior as alumni. We analyze micro data on alumni giving at an anonymous research university, and focus on three types of financial aid, scholarships, loans, and campus jobs. Consistent with the view of some professional fundraisers, we allow the receipt…

Health Instruction Packages: Nursing--Specific Diseases and Disorders.

ERIC Educational Resources Information Center

Curran, Fern A.; And Others

Text, illustrations, and exercises are utilized in this set of learning modules to instruct nurses and other health care professionals in the symptoms and treatment of common medical disorders. The first module, by Fern A. Curran, discusses the causes of decubitus ulcers (i.e., bedsores), the physical damage they can do, and methods of preventing…

Command Performance The USFS presents its annual Termiticide Report for 2014

Treesearch

Thomas Shelton; Donald Fye; Juliet Tang; Mark Mankowski

2015-01-01

For a termiticide to reach the American market where it's available for purchase by pest management professionals (PMPs), it must be federally registered by the U.S. Environmental Protection Agency (EPA). Chemical manufacturers wishing to register their products as a termiticide submit a registration package to the EPA containing fairly standard, nontarget...

Technological Tools in the Introductory Statistics Classroom: Effects on Student Understanding of Inferential Statistics

ERIC Educational Resources Information Center

Meletiou-Mavrotheris, Maria

2004-01-01

While technology has become an integral part of introductory statistics courses, the programs typically employed are professional packages designed primarily for data analysis rather than for learning. Findings from several studies suggest that use of such software in the introductory statistics classroom may not be very effective in helping…

Quality and safety aspects of meat products as affected by various physical manipulations of packaging materials.

PubMed

Lee, Keun Taik

2010-09-01

This article explores the effects of physically manipulated packaging materials on the quality and safety of meat products. Recently, innovative measures for improving quality and extending the shelf-life of packaged meat products have been developed, utilizing technologies including barrier film, active packaging, nanotechnology, microperforation, irradiation, plasma and far-infrared ray (FIR) treatments. Despite these developments, each technology has peculiar drawbacks which will need to be addressed by meat scientists in the future. To develop successful meat packaging systems, key product characteristics affecting stability, environmental conditions during storage until consumption, and consumers' packaging expectations must all be taken into consideration. Furthermore, the safety issues related to packaging materials must also be taken into account when processing, packaging and storing meat products.

Packaging: a grounded theory of how to report physiological deterioration effectively.

PubMed

Andrews, Tom; Waterman, Heather

2005-12-01

The aim of this paper is to present a study of how ward-based staff use vital signs and the Early Warning Score to package physiological deterioration effectively to ensure successful referral to doctors. The literature tends to emphasize the identification of premonitory signs in predicting physiological deterioration. However, these signs lack sensitivity and specificity, and there is evidence that nurses rely on subjective and subtle indicators. The Early Warning Score was developed for the early detection of deterioration and has been widely implemented, with various modifications. The data reported here form part of a larger study investigating the practical problems faced by general ward staff in detecting physiological deterioration. During 2002, interviews and observations were carried out using a grounded theory approach, and a total of 44 participants were interviewed (30 nurses, 7 doctors and 7 health care support workers). Participants reported that quantifiable evidence is the most effective means of referring patients to doctors, and the Early Warning Score achieves this by improving communication between professionals. Rather than reporting changes in individual vital signs, the Early Warning Score effectively packages them together, resulting in a much more convincing referral. It gives nurses a precise, concise and unambiguous means of communicating deterioration, and confidence in using medical language. Thus, nurses are empowered and doctors can focus quickly on identified problems. The Early Warning Score leads to successful referral of patients by providing an agreed framework for assessment, increasing confidence in the use of medical language and empowering nurses. It is essential that nurses and nursing students are supported in its use and in developing confidence in using medical language by continued emphasis on physiology and pathophysiology in the nursing curriculum.

Packaging Technologies for 500C SiC Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu

2013-01-01

Various SiC electronics and sensors are currently under development for applications in 500C high temperature environments such as hot sections of aerospace engines and the surface of Venus. In order to conduct long-term test and eventually commercialize these SiC devices, compatible packaging technologies for the SiC electronics and sensors are required. This presentation reviews packaging technologies developed for 500C SiC electronics and sensors to address both component and subsystem level packaging needs for high temperature environments. The packaging system for high temperature SiC electronics includes ceramic chip-level packages, ceramic printed circuit boards (PCBs), and edge-connectors. High temperature durable die-attach and precious metal wire-bonding are used in the chip-level packaging process. A high temperature sensor package is specifically designed to address high temperature micro-fabricated capacitive pressure sensors for high differential pressure environments. This presentation describes development of these electronics and sensor packaging technologies, including some testing results of SiC electronics and capacitive pressure sensors using these packaging technologies.

School-Based Multidisciplinary Teacher Team-Building Combining On-Line Professional Development (ESSEA) and Field-Based Environmental Monitoring (GLOBE)

NASA Astrophysics Data System (ADS)

Low, R.

2003-12-01

The multidisciplinary nature of Earth system science provides a strong foundation for integrated science teaching at the K-12 level. In a Minneapolis-St. Paul based project, urban middle school teaching teams composed of language arts and math specialists as well as physical, Earth, and biological science teachers participate in the NASA Earth system science course (ESSEA) and in the international GLOBE environmental monitoring project. For students, the goal is to integrate science throughout the curriculum as well as involve classes from different subjects in a high-interest school science project. For teachers, the project provides greatly-needed classroom support and teacher team building, as well as professional development. The on-line course provides continuity and communication between the different team members. Face-to-face meetings with the instructors on site are conducted every 4 weeks. The problem-based learning approach to environmental issues developed in the ESSEA course lends itself to application to local environmental issues. New ESSEA modules developed for the project highlight environmental problems associated with flooding, introduced species, and eutrofication of lakes and rivers located near the participating schools. In addition, ESSEA participants are certified as GLOBE teachers, and assist their students in monitoring water quality. The synergistic partnership of ESSEA and GLOBE provides an attractive package upon which long-term school-based environmental monitoring projects can be based.

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

NASA Technical Reports Server (NTRS)

Shalkhauser, K. A.; Li, K.; Shih, Y. C.

1992-01-01

Packaging schemes are developed that provide low-loss, hermetic enclosure for enhanced monolithic microwave and millimeter-wave integrated circuits. These package schemes are based on a fused quartz substrate material offering improved RF performance through 44 GHz. The small size and weight of the packages make them useful for a number of applications, including phased array antenna systems. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices.

Industrial packaging and assembly infrastructure for MOEMS

NASA Astrophysics Data System (ADS)

van Heeren, Henne

2004-01-01

In a mature industry all elements of the supply chain are available and are more or less in balance. Mainstream technologies are defined and well supported by a chain of specialist companies. Those specialist companies, offering services ranging from consultancy to manufacturing subcontracting, are an essential element in the industrialization. There specialization and dedication to one or a few elements in the technology increases professionalism and efficiency. The MOEMS industry however, is still in its infancy. After the birth and growth of many companies aiming at development of products, the appearance of companies aiming at the production of components and systems, we see know the first companies concentrating on the delivering of services to this industry. We can divide them in the like : * Design and Engineering companies * Foundries * Assembly and Packaging providers * Design and simulation software providers For manufacturing suppliers and customers the lack of industry standards and mainstream technologies is a serious drawback. Insight in availability and trends in technology is important to make the right choices in the field of industrialization and production. This awareness was the reason to perform a detailed study to the companies supplying commercial services in this field. This article focuses on one important part of this study: packaging and assembly. This tends to remain a bottleneck at the end of the design cycle, often delaying and sometimes preventing industrialization and commercialization. For nearly all MEMS/MST products literally everything comes together in the packaging and assembly. This is the area of full integration: electrical, mechanical, optical fluidic, magnetic etc. functionalities come together. The problems associated with the concentration of functionalities forms a big headache for the designer. Conflicting demands, of which functionality versus economics is only one, and technical hurdles have to overcome. Besides that, packaging and assembly is from nature application specific and solutions found are not always transferable from one product to another. But designers can often benefit from experience from other and general available technologies. A number of companies offer packaging and assembly services for MEMS/MST and this report give typical examples of those commercial services. The companies range from small start-ups, offering very specialized services, to large semiconductor packaging companies, having production lines for microsystem based products. Selecting the proper packaging method may tip the scales towards a product success or towards a product failure, while it nearly always present s a substantial part of the cost of the product. This is therefore is not a marginal concern, but a crucial part of the product design. The presentation will also address mayor trends and technologies. Finally, the article provides sufficient levels of classification and categorisation for various aspects for the technologies, in specific, and the industry, in general, to provide particularly useful insights into the activities and the developments in this market. With over 50 companies studied and assessed, it provides an up to date account of the state of this business and its future potential.

Implementing an electronic medication overview in Belgium.

PubMed

Storms, Hannelore; Marquet, Kristel; Nelissen, Katherine; Hulshagen, Leen; Lenie, Jan; Remmen, Roy; Claes, Neree

2014-12-16

An accurate medication overview is essential to reduce medication errors. Therefore, it is essential to keep the medication overview up-to-date and to exchange healthcare information between healthcare professionals and patients. Digitally shared information yields possibilities to improve communication. However, implementing a digitally shared medication overview is challenging. This articles describes the development process of a secured, electronic platform designed for exchanging medication information as executed in a pilot study in Belgium, called "Vitalink". The goal of "Vitalink" is to improve the exchange of medication information between professionals working in healthcare and patients in order to achieve a more efficient cooperation and better quality of care. Healthcare professionals of primary and secondary health care and patients of four Belgian regions participated in the project. In each region project groups coordinated implementation and reported back to the steering committee supervising the pilot study. The electronic medication overview was developed based on consensus in the project groups. The steering committee agreed to establish secured and authorized access through the use of electronic identity documents (eID) and a secured, eHealth-platform conform prior governmental regulations regarding privacy and security of healthcare information. A successful implementation of an electronic medication overview strongly depends on the accessibility and usability of the tool for healthcare professionals. Coordinating teams of the project groups concluded, based on their own observations and on problems reported to them, that secured and quick access to medical data needed to be pursued. According to their observations, the identification process using the eHealth platform, crucial to ensure secured data, was very time consuming. Secondly, software packages should meet the needs of their users, thus be adapted to daily activities of healthcare professionals. Moreover, software should be easy to install and run properly. The project would have benefited from a cost analysis executed by the national bodies prior to implementation.

Survey of sensitizing components of oxidative hair dyes (retail and professional products) in Germany.

PubMed

Kirchlechner, Stephan; Hübner, Anja; Uter, Wolfgang

2016-07-01

Components of oxidative hair dyes, such as p-toluylenediamine, are very potent contact sensitizers to which many consumers as well as hairdressers and their clients are commonly exposed. Based on the qualitative composition of both retail and professional haircare products as determined by package labeling (according to INCI), we conducted a survey on the exposure to active components of oxidative hair dyes in Germany. The joint occurrence of components is also discussed. Nearly all of the 20 most commonly used substances are potent or very potent contact sensitizers. Contained in 88 % of all products, p-toluylenediamine is the most common component. There are only minor differences between retail and professional products. A frequent combination of substances includes p-toluylenediamine (sulfate), resorcinol as well as m-aminophenol. However, their actual concentrations (which were not investigated in this study) may vastly differ depending on the shade of the individual hair dye. Descriptive univariate analysis reveals that the currently used patch test series "Hairdressing Chemicals", as recommended by the German Contact Allergy Research Group (DKG), does not adequately cover the spectrum of allergens consumers and professionals are exposed to. Other studies have also suggested that a number of other allergens should be tested as well. Taking into account the dynamic kinetics of oxidative hair dyes with respect to allergy development, the effects of combined simultaneous exposure to multiple allergens on the risk of sensitization requires further research. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

[For the Establishment of an Informative Support Framework in Pharmacies: Informative Support System for Diabetes].

PubMed

Yamamoto, Michiko; Doi, Hirohisa; Watanabe, Kazuhiro

2016-01-01

According to the Japanese revitalization strategy endorsed by the government in June, 2013, pharmacies are expected to play an active role as the hub of health information. But this is not sufficiently organized: an infrastructure for providing neutral information which becomes the basis of such health information is not yet established for healthcare professionals, patients and consumers. As for drug information available subsequent to the marketing of pharmaceutical products, information from the pharmaceutical companies including Package Inserts and Interview-forms are often found. However, though such information from companies is important, it is necessary for healthcare professionals and patients to have access to the information evaluated by a trustworthy third party. With overseas distribution, the dissemination of drug information is provided by third parties, which are independent of regulatory agencies. For example, National Health Service (NHS) Evidence in the UK offers wide-ranging information based on evidence from a disease to pharmaceutical products, and is a widely available information source for healthcare professionals, patients and consumers. With regard to therapeutic medications, drug information and health foods in the Japanese community, it is necessary for patients and healthcare professionals that we establish neutral and common systematic information based on the research evidence. By providing information on the Internet, which enables people to access the information easily and to assess a product's usefulness objectively, we hope to eventually develop a system that ensures a patient's safety in the use of drugs.

Evaluating the Effectiveness of a Comprehensive Staff Training Package for Behavioral Interventions for Children with Autism

ERIC Educational Resources Information Center

Weinkauf, Sara M.; Zeug, Nicole M.; Anderson, Claire T.; Ala'i-Rosales, Shahla

2011-01-01

The effectiveness of behavioral interventions for the treatment of young children with autism has been well documented in professional literature. The success of these procedures, however, depends on the fidelity of implementation and proper training of the therapist. The purpose of this study was to evaluate a 125-skill, comprehensive staff…

Power Line Technician. Second Edition. Module B. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This module is the second in a series that is designed to help students achieve greater professional and personal success as power line technicians. Each module represents one or more complete units of instruction with components organized into one instructor and one student "package": the instructor's manual and the student workbook.…

Power Line Technician. Second Edition. Module A. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This module is the first in a series that is designed to help students achieve greater professional and personal success as power line technicians. Each module represents one or more complete units of instruction with components organized into one instructor and one student "package": the instructor's manual and the student workbook. The…

78 FR 59058 - Second Call for Nominations for the Wild Horse and Burro Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

..., 2013 (78 FR 39768), it is not necessary to respond to this Notice. DATES: Nominations must be post... 260, Washington, DC 20240. All mail and packages that are sent via FedEx or UPS should be addressed as... study; 8. Career Highlights: Significant related experience, civic and professional activities, elected...

78 FR 39768 - Notice of Call for Nominations for the Wild Horse and Burro Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... Agriculture, through the U.S. Forest Service. DATES: Nominations must be post marked or submitted to the.... All mail and packages that are sent via FedEx or UPS should be addressed as follows: National Wild... study); 8. Career Highlights: Significant related experience, civic and professional activities, elected...

Transformation of food packaging from passive to innovative via nanotechnology: concepts and critiques.

PubMed

Mlalila, Nichrous; Kadam, Dattatreya M; Swai, Hulda; Hilonga, Askwar

2016-09-01

In recent decades, there is a global advancement in manufacturing industry due to increased applications of nanotechnology. Food industry also has been tremendously changing from passive packaging to innovative packaging, to cope with global trends, technological advancements, and consumer preferences. Active research is taking place in food industry and other scientific fields to develop innovative packages including smart, intelligent and active food packaging for more effective and efficient packaging materials with balanced environmental issues. However, in food industry the features behind smart packaging are narrowly defined to be distinguished from intelligent packaging as in other scientific fields, where smart materials are under critical investigations. This review presents some scientific concepts and features pertaining innovative food packaging. The review opens new research window in innovative food packaging to cover the existing disparities for further precise research and development of food packaging industry.

Packaging Software Assets for Reuse

NASA Astrophysics Data System (ADS)

Mattmann, C. A.; Marshall, J. J.; Downs, R. R.

2010-12-01

The reuse of existing software assets such as code, architecture, libraries, and modules in current software and systems development projects can provide many benefits, including reduced costs, in time and effort, and increased reliability. Many reusable assets are currently available in various online catalogs and repositories, usually broken down by disciplines such as programming language (Ibiblio for Maven/Java developers, PyPI for Python developers, CPAN for Perl developers, etc.). The way these assets are packaged for distribution can play a role in their reuse - an asset that is packaged simply and logically is typically easier to understand, install, and use, thereby increasing its reusability. A well-packaged asset has advantages in being more reusable and thus more likely to provide benefits through its reuse. This presentation will discuss various aspects of software asset packaging and how they can affect the reusability of the assets. The characteristics of well-packaged software will be described. A software packaging domain model will be introduced, and some existing packaging approaches examined. An example case study of a Reuse Enablement System (RES), currently being created by near-term Earth science decadal survey missions, will provide information about the use of the domain model. Awareness of these factors will help software developers package their reusable assets so that they can provide the most benefits for software reuse.

Incentives for improving human resource outcomes in health care: overview of reviews.

PubMed

Misfeldt, Renee; Linder, Jordana; Lait, Jana; Hepp, Shelanne; Armitage, Gail; Jackson, Karen; Suter, Esther

2014-01-01

To review the effectiveness of financial and nonfinancial incentives for improving the benefits (recruitment, retention, job satisfaction, absenteeism, turnover, intent to leave) of human resource strategies in health care. Overview of 33 reviews published from 2000 to 2012 summarized the effectiveness of incentives for improving human resource outcomes in health care (such as job satisfaction, turnover rates, recruitment, and retention) that met the inclusion criteria and were assessed by at least two research members using the Assessment of Multiple Systematic Reviews quality assessment tool. Of those, 13 reviews met the quality criteria and were included in the overview. Information was extracted on a description of the review, the incentives considered, and their impact on human resource outcomes. The information on the relationship between incentives and outcomes was assessed and synthesized. While financial compensation is the best-recognized approach within an incentives package, there is evidence that health care practitioners respond positively to incentives linked to the quality of the working environments including opportunities for professional development, improved work life balance, interprofessional collaboration, and professional autonomy. There is less evidence that workload factors such as job demand, restructured staffing models, re-engineered work designs, ward practices, employment status, or staff skill mix have an impact on human resource outcomes. Overall, evidence of effective strategies for improving outcomes is mixed. While financial incentives play a key role in enhancing outcomes, they need to be considered as only one strategy within an incentives package. There is stronger evidence that improving the work place environment and instituting mechanisms for work-life balance need to be part of an overall strategy to improve outcomes for health care practitioners.

fgui: A Method for Automatically Creating Graphical User Interfaces for Command-Line R Packages

PubMed Central

Hoffmann, Thomas J.; Laird, Nan M.

2009-01-01

The fgui R package is designed for developers of R packages, to help rapidly, and sometimes fully automatically, create a graphical user interface for a command line R package. The interface is built upon the Tcl/Tk graphical interface included in R. The package further facilitates the developer by loading in the help files from the command line functions to provide context sensitive help to the user with no additional effort from the developer. Passing a function as the argument to the routines in the fgui package creates a graphical interface for the function, and further options are available to tweak this interface for those who want more flexibility. PMID:21625291

What is best practice in sex and relationship education? A synthesis of evidence, including stakeholders' views.

PubMed

Pound, Pandora; Denford, Sarah; Shucksmith, Janet; Tanton, Clare; Johnson, Anne M; Owen, Jenny; Hutten, Rebecca; Mohan, Leanne; Bonell, Chris; Abraham, Charles; Campbell, Rona

2017-07-02

Sex and relationship education (SRE) is regarded as vital to improving young people's sexual health, but a third of schools in England lacks good SRE and government guidance is outdated. We aimed to identify what makes SRE programmes effective, acceptable, sustainable and capable of faithful implementation. This is a synthesis of findings from five research packages that we conducted (practitioner interviews, case study investigation, National Survey of Sexual Attitudes and Lifestyles, review of reviews and qualitative synthesis). We also gained feedback on our research from stakeholder consultations. Primary research and stakeholder consultations were conducted in the UK. Secondary research draws on studies worldwide. Our findings indicate that school-based SRE and school-linked sexual health services can be effective at improving sexual health. We found professional consensus that good programmes start in primary school. Professionals and young people agreed that good programmes are age-appropriate, interactive and take place in a safe environment. Some young women reported preferring single-sex classes, but young men appeared to want mixed classes. Young people and professionals agreed that SRE should take a 'life skills' approach and not focus on abstinence. Young people advocated a 'sex-positive' approach but reported this was lacking. Young people and professionals agreed that SRE should discuss risks, but young people indicated that approaches to risk need revising. Professionals felt teachers should be involved in SRE delivery, but many young people reported disliking having their teachers deliver SRE and we found that key messages could become lost when interpreted by teachers. The divergence between young people and professionals was echoed by stakeholders. We developed criteria for best practice based on the evidence. We identified key features of effective and acceptable SRE. Our best practice criteria can be used to evaluate existing programmes, contribute to the development of new programmes and inform consultations around statutory SRE. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development of an e-learning package on Service-Learning for university teachers: experience from Hong Kong.

PubMed

Shek, Daniel T L; Chan, Stephen C F

2013-01-01

To help university teachers to understand Service-Learning and develop Service-Learning subjects, a 3-h+ e-learning package was developed at The Hong Kong Polytechnic University (PolyU). There are seven units in this e-learning package: introduction session (Unit 1), what is Service-Learning? (Unit 2), impact and benefits of Service-Learning (Unit 3), myths and positive attitudes toward Service-Learning (Unit 4), developing a Service-Learning subject at PolyU (Unit 5), self-reflection about Service-Learning (Unit 6), and concluding session (Unit 7). To understand the views of the users on the e-learning package, the package was offered before formal launching. For the first offering, three focus group sessions were held. Results showed that the users were satisfied with the structural arrangement of the e-learning package and agreed that the e-learning package was useful for them to understand more about Service-Learning. For the second offering, colleagues were generally satisfied with the e-learning package and demonstrated gain in knowledge on Service-Learning. Suggestions for improvement were noted.

IFT Scientific Status Summary 2008: Innovative Food Packaging Solutions

USDA-ARS?s Scientific Manuscript database

Food and beverage packaging comprises 55-65% of the $110 billion value of packaging in the United States. This review provides a summary of innovative technology developments in food packaging. The expanded role of food and beverage packaging is reviewed. Active and intelligent food packaging, ba...

The use of applied software for the professional training of students studying humanities

NASA Astrophysics Data System (ADS)

Sadchikova, A. S.; Rodin, M. M.

2017-01-01

Research practice is an integral part of humanities students' training process. In this regard the training process is to include modern information techniques of the training process of students studying humanities. This paper examines the most popular applied software products used for data processing in social science. For testing purposes we selected the most commonly preferred professional packages: MS Excel, IBM SPSS Statistics, STATISTICA, STADIA. Moreover the article contains testing results of a specialized software Prikladnoy Sotsiolog that is applicable for the preparation stage of the research. The specialised software were tested during one term in groups of students studying humanities.

Program evaluation of a model to integrate internationally educated health professionals into clinical practice

PubMed Central

2013-01-01

Background The demand for health professionals continues to increase, partially due to the aging population and the high proportion of practitioners nearing retirement. The University of British Columbia (UBC) has developed a program to address this demand, by providing support for internationally trained Physiotherapists in their preparation for taking the National Physiotherapy competency examinations. The aim was to create a program comprised of the educational tools and infrastructure to support internationally educated physiotherapists (IEPs) in their preparation for entry to practice in Canada and, to improve their pass rate on the national competency examination. Methods The program was developed using a logic model and evaluated using program evaluation methodology. Program tools and resources included educational modules and curricular packages which were developed and refined based on feedback from clinical experts, IEPs and clinical physical therapy mentors. An examination bank was created and used to include test-enhanced education. Clinical mentors were recruited and trained to provide clinical and cultural support for participants. Results The IEP program has recruited 124 IEPs, with 69 now integrated into the Canadian physiotherapy workforce, and more IEPs continuing to apply to the program. International graduates who participated in the program had an improved pass rate on the national Physiotherapy Competency Examination (PCE); participation in the program resulted in them having a 28% (95% CI, 2% to 59%) greater possibility of passing the written section than their counterparts who did not take the program. In 2010, 81% of all IEP candidates who completed the UBC program passed the written component, and 82% passed the clinical component. Conclusion The program has proven to be successful and sustainable. This program model could be replicated to support the successful integration of other international health professionals into the workforce. PMID:24119470

Job satisfaction of urban community health workers after the 2009 healthcare reform in China: a systematic review.

PubMed

Zhang, Mingji; Yang, Rongrong; Wang, Wei; Gillespie, James; Clarke, Susan; Yan, Fei

2016-02-01

In 2009 China introduced a new round of healthcare reform to strengthen primary care networks through the development of Community Health Services (CHS). This study aimed to measure the degree of overall job satisfaction and also satisfaction dimensions and then find common causes of dissatisfaction among Community Health Workers (CHWs) in urban China by conducting a systematic review of relevant studies on CHWs' job satisfaction. Web of Science, PubMed, Google scholar, Wanfangdata and CNKI were searched. Publications about job satisfaction of CHWs were screened and assessed. Finally 18 Chinese articles and 4 English articles were included. Quantitative and qualitative data were extracted for nine themes concerning job satisfaction. Narrative synthesis was employed to analyze the data. CHWs were generally neither satisfied nor dissatisfied with their work after 2009. Financial rewards and opportunities for professional development were the most important determinants of job dissatisfaction. Workers were generally satisfied with interpersonal relationships in the workplace. The expanded public health services package and human-resources related regulations, e.g. the professional rank promotion system, government-controlled staffing policy (i.e. staff-quota system) and government-controlled budgetary planning (i.e. the Separation of Revenue and Expenditure), were policies that had an effect on job satisfaction. Financial rewards and professional development were the two main predictors of job satisfaction. To improve CHS in China, policy-makers (especially the central government) need to consider the impact of current policies on job satisfaction in order to reduce job dissatisfaction. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

[A philosophical information leaflet to accompany a DSM classification].

PubMed

Kraaijenbrink, J; Kuipers, T; van der Laan, B; Kremer, S

2016-01-01

The introduction of the dsm-5 has re-ignited discussion about the classification of mental disorders. The public may have misconceptions with regard to the nature of the information contained in a dsm-classification. To bring about a conceptual switch so that the professional user of a classification sees it as an aid to diagnosis rather than as a definition of a problem or illness. We devised a 'thought experiment' to serve as a support for dsm classifications. The 'thought experiment' led us to devise a medicine package containing a 'philosophical' information leaflet. This 'thought-experiment', the information leaflet and the medicine package were presented to both students and trainee doctors at the ucp in Groningen and to clinicians at the fpc dr. S. van Mesdag Clinic. Students and trainee doctors were able to make the desired conceptual switch as a result of 'the thought experiment' and with the help they received from the medicine packaging containing the 'philosophical' information leaflet.

A Novel Dietary Assessment Method to Measure a Healthy and Sustainable Diet Using the Mobile Food Record: Protocol and Methodology

PubMed Central

Harray, Amelia J.; Boushey, Carol J.; Pollard, Christina M.; Delp, Edward J.; Ahmad, Ziad; Dhaliwal, Satvinder S.; Mukhtar, Syed Aqif; Kerr, Deborah A.

2015-01-01

The world-wide rise in obesity parallels growing concerns of global warming and depleting natural resources. These issues are often considered separately but there may be considerable benefit to raising awareness of the impact of dietary behaviours and practices on the food supply. Australians have diets inconsistent with recommendations, typically low in fruit and vegetables and high in energy-dense nutrient-poor foods and beverages (EDNP). These EDNP foods are often highly processed and packaged, negatively influencing both health and the environment. This paper describes a proposed dietary assessment method to measure healthy and sustainable dietary behaviours using 4-days of food and beverage images from the mobile food record (mFR) application. The mFR images will be assessed for serves of fruit and vegetables (including seasonality), dairy, eggs and red meat, poultry and fish, ultra-processed EDNP foods, individually packaged foods, and plate waste. A prediction model for a Healthy and Sustainable Diet Index will be developed and tested for validity and reliability. The use of the mFR to assess adherence to a healthy and sustainable diet is a novel and innovative approach to dietary assessment and will have application in population monitoring, guiding intervention development, educating consumers, health professionals and policy makers, and influencing dietary recommendations. PMID:26151176

The emerging dental workforce: short-term expectations of, and influences on dental students graduating from a London dental school in 2005.

PubMed

Gallagher, Jennifer E; Clarke, Wendy; Wilson, Nairn H F

2008-07-01

The aim of this research was to identify short-term career aspirations and goals of final-year dental students at a London dental school and the perceived factors that influenced these aspirations. Two methods were used to collect data on final-year students' short-term career plans and influences. Qualitative data were collected through focus groups and analysed using 'framework methodology'. These findings informed a questionnaire survey of all students at the end of their final undergraduate year. Data were entered into and analysed using a statistical software package. Thirty-five students participated in focus groups, with recruitment continuing until data were saturated. Ninety per cent (n=126) of the total population (140) responded to the questionnaire survey; the majority were Asian (70%), female (58%), and aged 23 years (59%). Short-term professional expectations focused around 'achieving professional status within a social context', 'gaining professional experience', 'developing independence' and 'achieving financial stability'. 'Achieving financial stability' was ranked as the most important influence in decision-making about their career in the short term (77%), followed by 'balance of work and other aspects of life' (75%) and 'good lifestyle' (75%). Four out of ten intended to work towards membership of a Royal College and/or becoming a specialist. Proximity to family (81%) and friends (79%) was an important or very important influence on location in the short term. Asian students were significantly more likely to rate 'proximity to family' (p=0.042), working in an 'urban area' (p=0.001) and 'opportunities for private care' (p=0.043) of greater importance than their White counterparts. Short-term aspirations involve 'achieving professional status within a social context', and personal, social, professional and financial goals. Location of future practice was significantly associated with ethnicity.

Health Libraries and Information Services in Tanzania: A Strategic Assessment

PubMed Central

Haruna, Hussein; Mtoroki, Majaliwa; Gerendasy, Dan D.; Detlefsen, Ellen G.

2016-01-01

Objective To identify the current status and local impact of health sciences libraries and the perception of these libraries by their users, as a pre-requisite to the development of a competence-based curriculum for health information science training in Tanzania. Methodology A needs assessment was carried out using a convenience sample of local respondents, including librarians, trainers, academicians, students, health care providers and patients and families, drawn from national, referral, regional, district hospitals, health training institutions, and Universities from both government and non-government entities in Tanzania. A focus group approach was used to gather data from respondents. Results Results from this assessment revealed that health science libraries in Tanzania are faced with the challenges of insufficient infrastructure, old technology, limited facilities and furniture, inadequate and incompetent library staff, lack of health sciences librarians, outdated and insufficient resources, as well as low knowledge and use of information technologies by library clients. Most respondents would prefer to have both physical and electronic libraries, as well as librarians with specialized health information science skills, to cope with changing nature of the medical field. Conclusion The findings obtained from this assessment are strong enough to guide the development of a curriculum and training strategy and an operational plan and training packages for health information professionals. The development of a training curriculum for health information science professionals will mean better health information service delivery for Tanzania. PMID:28283146

Optimizing Performance Through Sleep-Wake Homeostasis: Integrating Physiological and Neurobehavioral Data via Ambulatory Acquisition in Laboratory and Field Environments

DTIC Science & Technology

2009-04-18

intake and sophisticated signal processing of electroencephalographic (EEG), electrooculographic ( EOG ), electrocardiographic (ECG), and...electroencephalographic (EEG), electrooculographic ( EOG ), electrocardiographic (ECG), and electromyographic (EMG) physiological signals . It also has markedly...ambulatory physiological acquisition and quantitative signal processing; (2) Brain Amp MR Plus 32 and BrainVision Recorder Professional Software Package for

Meet Guidance Needs of Older Adults. Module CG C-16 of Category C--Implementing. Competency-Based Career Guidance Modules.

ERIC Educational Resources Information Center

Cook, Patricia; Stewart, Ellen

This learning module, one in a series of competency-based guidance program training packages focusing upon professional and paraprofessional competencies of guidance personnel, deals with meeting the guidance needs of older adults. Addressed in the module are the following topics: describing a negative and a positive bias, stereotype, or attitude…

25 CFR 170.462 - When may a self-determination contract or self-governance agreement include PS&E review and...

Code of Federal Regulations, 2010 CFR

2010-04-01

..., DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction... design and approval of the PS&E package; (2) A licensed professional engineer will certify that the PS&E meets or exceeds the design, health, and safety standards in appendix B to subpart D for an IRR...

Imagers for digital still photography

NASA Astrophysics Data System (ADS)

Bosiers, Jan; Dillen, Bart; Draijer, Cees; Manoury, Erik-Jan; Meessen, Louis; Peters, Inge

2006-04-01

This paper gives an overview of the requirements for, and current state-of-the-art of, CCD and CMOS imagers for use in digital still photography. Four market segments will be reviewed: mobile imaging, consumer "point-and-shoot cameras", consumer digital SLR cameras and high-end professional camera systems. The paper will also present some challenges and innovations with respect to packaging, testing, and system integration.

Provide Career Guidance to Girls and Women. Module CG C-13 of Category C--Implementing. Competency-Based Career Guidance Modules.

ERIC Educational Resources Information Center

Birk, Janice M.; Colby, Pamela G.

This learning module, one in a series of competency-based guidance program training packages focusing upon professional and paraprofessional competencies of guidance personnel, deals with providing career guidance to girls and women. Addressed in the module are the following topics: society's influence on shaping differential roles and behaviors…

Introduction to the Practice of Statistics David Moore Introduction to the Practice of Statistics and George McCabe WH. Freeman 850 £39.99 071676282X 071676282X [Formula: see text].

PubMed

2005-10-01

This is a very well-written and beautifully presented book. It is north American in origin and, while it will be invaluable for teachers of statistics to nurses and other healthcare professionals, it is probably not suitable for many preor post-registration students in health in the UK. The material is quite advanced and, while well illustrated, exemplified and with numerous examples for students, it takes a fairly mathematical approach in places. Nevertheless, the book has much to commend it, including a CD-ROM package containing tutorials, a statistical package, solutions based on the exercises in the text and case studies.

Natural biopolimers in organic food packaging

NASA Astrophysics Data System (ADS)

Wieczynska, Justyna; Cavoski, Ivana; Chami, Ziad Al; Mondelli, Donato; Di Donato, Paola; Di Terlizzi, Biagio

2014-05-01

Concerns on environmental and waste problems caused by use of non-biodegradable and non-renewable based plastic packaging have caused an increase interest in developing biodegradable packaging using renewable natural biopolymers. Recently, different types of biopolymers like starch, cellulose, chitosan, casein, whey protein, collagen, egg white, soybean protein, corn zein, gelatin and wheat gluten have attracted considerable attention as potential food packaging materials. Recyclable or biodegradable packaging material in organic processing standards is preferable where possible but specific principles of packaging are not precisely defined and standards have to be assessed. There is evidence that consumers of organic products have specific expectations not only with respect to quality characteristics of processed food but also in social and environmental aspects of food production. Growing consumer sophistication is leading to a proliferation in food eco-label like carbon footprint. Biopolymers based packaging for organic products can help to create a green industry. Moreover, biopolymers can be appropriate materials for the development of an active surfaces designed to deliver incorporated natural antimicrobials into environment surrounding packaged food. Active packaging is an innovative mode of packaging in which the product and the environment interact to prolong shelf life or enhance safety or sensory properties, while maintaining the quality of the product. The work will discuss the various techniques that have been used for development of an active antimicrobial biodegradable packaging materials focusing on a recent findings in research studies. With the current focus on exploring a new generation of biopolymer-based food packaging materials with possible applications in organic food packaging. Keywords: organic food, active packaging, biopolymers , green technology

Effect of drug reminder packaging on medication adherence: a systematic review revealing research gaps

PubMed Central

2014-01-01

Background This was a systematic review of the literature in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Evidence mapping was used to reveal the effect of drug reminder packaging on medication adherence, to identify research gaps and to make suggestions for future research. Methods PubMed, Embase, CINAHL and PsycINFO were searched with an end date of September 2013 using the Medical Subject Headings (MeSH) term ‘medication adherence’ and 20 different search terms for ‘drug reminder packaging’, limited to the English and German languages. Additional references were identified through cross-referencing. All prospective controlled trials with an intervention using drug reminder packaging for patients taking at least one medication without the assistance of a health-care professional were included in the evidence mapping of the effect of drug reminder packaging on adherence and outcomes according to the Economic, Clinical and Humanistic Outcomes (ECHO) model. Results A total of 30 studies met the inclusion criteria: 10 randomized controlled trials, 19 controlled clinical trials and 1 cohort study. Drug reminder packaging had a significant effect on at least one adherence parameter in 17 studies (57%). The methodological quality was strong in five studies. Two studies provided complete information. Clear research gaps emerged. Conclusions Overall, the studies showed a positive effect of drug reminder packaging on adherence and clinical outcomes. However, poor reporting and important gaps like missing humanistic and economic outcomes and neglected safety issues limit the drawing of firm conclusions. Suggestions are made for future research. PMID:24661495

A systematic review of substance misuse assessment packages.

PubMed

Sweetman, Jennifer; Raistrick, Duncan; Mdege, Noreen D; Crosby, Helen

2013-07-01

Health-care systems globally are moving away from process measures of performance to payments for outcomes achieved. It follows that there is a need for a selection of proven quality tools that are suitable for undertaking comprehensive assessments and outcomes assessments. This review aimed to identify and evaluate existing comprehensive assessment packages. The work is part of a national program in the UK, Collaborations in Leadership of Applied Health Research and Care. Systematic searches were carried out across major databases to identify instruments designed to assess substance misuse. For those instruments identified, searches were carried out using the Cochrane Library, Embase, Ovid MEDLINE(®) and PsychINFO to identify articles reporting psychometric data. From 595 instruments, six met the inclusion criteria: Addiction Severity Index; Chemical Use, Abuse and Dependence Scale; Form 90; Maudsley Addiction Profile; Measurements in the Addictions for Triage and Evaluation; and Substance Abuse Outcomes Module. The most common reasons for exclusion were that instruments were: (i) designed for a specific substance (239); (ii) not designed for use in addiction settings (136); (iii) not providing comprehensive assessment (89); and (iv) not suitable as an outcome measure (20). The six packages are very different and suited to different uses. No package had adequate evaluation of their properties and so the emphasis should be on refining a small number of tools with very general application rather than creating new ones. An alternative to using 'off-the-shelf' packages is to create bespoke packages from well-validated, single-construct scales. [ © 2013 Australasian Professional Society on Alcohol and other Drugs.

Food packaging history and innovations.

PubMed

Risch, Sara J

2009-09-23

Food packaging has evolved from simply a container to hold food to something today that can play an active role in food quality. Many packages are still simply containers, but they have properties that have been developed to protect the food. These include barriers to oxygen, moisture, and flavors. Active packaging, or that which plays an active role in food quality, includes some microwave packaging as well as packaging that has absorbers built in to remove oxygen from the atmosphere surrounding the product or to provide antimicrobials to the surface of the food. Packaging has allowed access to many foods year-round that otherwise could not be preserved. It is interesting to note that some packages have actually allowed the creation of new categories in the supermarket. Examples include microwave popcorn and fresh-cut produce, which owe their existence to the unique packaging that has been developed.

Examining the effects of a DNA fingerprinting workshop on science teachers' professional development and student learning

NASA Astrophysics Data System (ADS)

Sonmez, Duygu

The 21st century has become the age of biology with the completion of the human genome project and other milestone discoveries. Recent progress has redefined what it means to be scientifically literate, which is the ultimate goal in science education. "What students should know?" "What needs to be taught?" These questions lead to reformulation of the science curriculum due to the changing nature of scientific knowledge. Molecular biology is increasingly emphasized in the science curriculum along with applications of the latest developments within our daily lives, such as medicine or legal matters. However, many schools and classrooms exclude the latest advances in molecular genetics from science curriculum and even teach biology as a non-laboratory science. Many science educators wonder what can be done to help every child gain meaningful experiences with molecular genetics. Limited content knowledge among teachers due to the changing nature of scientific knowledge, and the rapid discoveries in technology are known to be a part of the problem for teachers, especially for teachers who have been in the workforce for many years. A major aim of professional development is to help teachers cope with the advances in scientific knowledge and provide paths for teachers to continually improve their knowledge and skills. The expectation is that increased knowledge and skills among teachers will be reflected in student achievement. Professional development is typically offered in a variety of formats, from short-term, one-shot workshop approaches to long term courses. The effectiveness of short-term exposures, though, is in many cases is questionable. One of the issues appears to be the gap between the incidence of teachers' attendance at professional development programs and the incidence of implementation in participants' classrooms. This study focuses on this issue by exploring the relationship between teachers' professional development attendance and their implementation behavior. The goal is to understand what factors affect teachers' decision making to implement the new knowledge and skills in their classrooms. For this purpose, the study focuses on the effects of a DNA fingerprinting workshop, which has been developed and is regularly offered by a large Midwestern university in the United States for secondary science teachers and their students through cooperation between the university and a large Midwestern public school district. The workshop focuses on the biotechnology applications of genetics---specifically, use of DNA fingerprinting technology in different areas of social life---while forensic science is emphasized. Results indicate that the teachers' motivation to attend the DNA Fingerprinting professional development workshop was mainly influenced by two variables: (1) the need to improve content knowledge and skills, and (2) requirements associated with current educational policies. Level of content knowledge was also found to be a factor contributing to teachers' motivation to implement the workshop. Concerns related to student maturity and classroom management were also identified as factors influencing teachers' implementation behavior. Evidence that the DNA Fingerprinting workshop can be successfully implemented by classroom teachers was obtained. The DNA fingerprinting workshop was found to be a successful model for packaging professional development experiences for content intensive areas.

Status and Trend of Automotive Power Packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Zhenxian

2012-01-01

Comprehensive requirements in aspects of cost, reliability, efficiency, form factor, weight, and volume for power electronics modules in modern electric drive vehicles have driven the development of automotive power packaging technology intensively. Innovation in materials, interconnections, and processing techniques is leading to enormous improvements in power modules. In this paper, the technical development of and trends in power module packaging are evaluated by examining technical details with examples of industrial products. The issues and development directions for future automotive power module packaging are also discussed.

Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

2015-01-01

This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

Vacuum decay container closure integrity leak test method development and validation for a lyophilized product-package system.

PubMed

Patel, Jayshree; Mulhall, Brian; Wolf, Heinz; Klohr, Steven; Guazzo, Dana Morton

2011-01-01

A leak test performed according to ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method was developed and validated for container-closure integrity verification of a lyophilized product in a parenteral vial package system. This nondestructive leak test method is intended for use in manufacturing as an in-process package integrity check, and for testing product stored on stability in lieu of sterility tests. Method development and optimization challenge studies incorporated artificially defective packages representing a range of glass vial wall and sealing surface defects, as well as various elastomeric stopper defects. Method validation required 3 days of random-order replicate testing of a test sample population of negative-control, no-defect packages and positive-control, with-defect packages. Positive-control packages were prepared using vials each with a single hole laser-drilled through the glass vial wall. Hole creation and hole size certification was performed by Lenox Laser. Validation study results successfully demonstrated the vacuum decay leak test method's ability to accurately and reliably detect those packages with laser-drilled holes greater than or equal to approximately 5 μm in nominal diameter. All development and validation studies were performed at Whitehouse Analytical Laboratories in Whitehouse, NJ, under the direction of consultant Dana Guazzo of RxPax, LLC, using a VeriPac 455 Micro Leak Test System by Packaging Technologies & Inspection (Tuckahoe, NY). Bristol Myers Squibb (New Brunswick, NJ) fully subsidized all work. A leak test performed according to ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method was developed and validated to detect defects in stoppered vial packages containing lyophilized product for injection. This nondestructive leak test method is intended for use in manufacturing as an in-process package integrity check, and for testing product stored on stability in lieu of sterility tests. Test method validation study results proved the method capable of detecting holes laser-drilled through the glass vial wall greater than or equal to 5 μm in nominal diameter. Total test time is less than 1 min per package. All method development and validation studies were performed at Whitehouse Analytical Laboratories in Whitehouse, NJ, under the direction of consultant Dana Guazzo of RxPax, LLC, using a VeriPac 455 Micro Leak Test System by Packaging Technologies & Inspection (Tuckahoe, NY). Bristol Myers Squibb (New Brunswick, NJ) fully subsidized all work.

Development of Active Learning Curriculum for CASPER's Microgravity Drop Tower

NASA Astrophysics Data System (ADS)

Carmona-Reyes, Jorge; Wang, Li; York, Judy; Matthews, Lorin; Laufer, Rene; Cook, Mike; Schmoke, Jimmy; Hyde, Truell

2016-10-01

As CASPER's new drop tower comes on line, plans for correlated educational research curricula are underway. CASPER's educational research team is working on developing curricula specific to the CASPER drop tower, modeled on a contest currently in use by (BEST) Robotics Inc. within central Texas independent school districts. The curricula integrates age specific use of computer programming software packages such as ``Scratch'' with industry standard communication protocols and augmented reality applications. Content is constructed around an earth and space science framework, covering subjects such as stars and galaxies, matter and energy, fusion and fission at a middle school level. CASPER faculty are partnering with the Region 12 Service Center; this combination provides a wide range of expertise that includes professional development, pedagogical methods, computational thinking in addition to microgravity and space science research expertise. The details of this work will be presented and samples of the manner in which it is impacting the CASPER research and educational outreach partnership will be discussed.

49 CFR 173.36 - Hazardous materials in Large Packagings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Packagings (e.g., 51H) are only authorized for use with flexible inner packagings. (3) Friction. The nature and thickness of the outer packaging must be such that friction during transportation is not likely to... transportation in inner packagings appropriately resistant to an increase of internal pressure likely to develop...

1974-75 NCTE Guide to Teaching Materials for English, Grades 7-12: An Annotated Listing of Textbooks and Related Materials for Secondary Schools Prepared by the NCTE Staff.

ERIC Educational Resources Information Center

National Council of Teachers of English, Urbana, IL.

This guide contains 550 annotations for English anthologies, textbooks, workbooks, multimedia packages, and other materials for grades 7-12. Works of literature, audiovisual materials, and professional publications are included only when integrally related to specific, listed instructional materials. Entries are grouped into the following subject…

Evaluation of a Reading Comprehension Strategy Package to Improve Reading Comprehension of Adult College Students with Acquired Brain Injuries

ERIC Educational Resources Information Center

Griffiths, Gina G.

2013-01-01

Adults with mild to moderate acquired brain injury (ABI) often pursue post-secondary or professional education after their injuries in order to enter or re-enter the job market. An increasing number of these adults report problems with reading-to-learn. The problem is particularly concerning given the growing population of adult survivors of ABI.…

Packaging of silicon photonic devices: from prototypes to production

NASA Astrophysics Data System (ADS)

Morrissey, Padraic E.; Gradkowski, Kamil; Carroll, Lee; O'Brien, Peter

2018-02-01

The challenges associated with the photonic packaging of silicon devices is often underestimated and remains technically challenging. In this paper, we review some key enabling technologies that will allow us to overcome the current bottleneck in silicon photonic packaging; while also describing the recent developments in standardisation, including the establishment of PIXAPP as the worlds first open-access PIC packaging and assembly Pilot Line. These developments will allow the community to move from low volume prototype photonic packaged devices to large scale volume manufacturing, where the full commercialisation of PIC technology can be realised.

Developing Listening and Speaking Skills. Learning Package No. 46.

ERIC Educational Resources Information Center

Hyslop, Nancy, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on developing listening and speaking skills is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Developing Thinking Skills through Literature. Learning Package No. 19.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing thinking skills through literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Developing Oral Language. Learning Package No. 1.

ERIC Educational Resources Information Center

Hong, Zhang; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing oral language is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Organizational culture of a private hospital.

PubMed

Vegro, Thamiris Cavazzani; Rocha, Fernanda Ludmilla Rossi; Camelo, Silvia Helena Henriques; Garcia, Alessandra Bassalobre

2016-06-01

Objective To assess the values and practices that characterize the organizational culture of a private hospital in the state of São Paulo in the perspective of nursing professionals. Methods Quantitative, descriptive, cross-sectional study. Data collection was conducted between January and March 2013 using the Brazilian Instrument for Assessing Organizational Culture. Twenty-one nurses and sixty-two nursing aides and technicians participated in the study. The responses of the participants were coded into numerical categories, generating an electronic database to be analyzed by means of the software Statistical Package for the Social Sciences. Results Scores of cooperative professionalism values (3.24); hierarchical strictness values (2.83); individual professionalism values (2.69); well-being values (2.71); external integration practices (3.73); reward and training practices (2.56); and relationship promotion practices (2.83). Conclusion In the perception of workers, despite the existence of hierarchical strictness there is cooperation at work and the institution pursues customer satisfaction and good interpersonal relationships.

Maldives. Package on population education for special interest groups developed.

PubMed

1995-01-01

The Population Education Program of the Non-Formal Education Center has developed a package of Population Education for Special Interest Groups comprising a learning package and fieldworker's guide. The learning package is especially developed for teaching population education for out-of-school populations. Special interest groups in Maldives include newly married couples, adolescents, and working youth. Produced under the guidance of UNESCO, Bangkok, the package contains 36 different materials such as posters, charts, leaflets, booklets, stories, and illustrated booklets which may be taught in 36 to 45 periods. The materials deal with eight themes, namely, family size and family welfare, population and resources, delayed marriage and parenthood, responsible parenthood, population-related values and beliefs, women in development, AIDS/STD, and respect for old people. Accompanying the learning package is the fieldworker's guide used to teach the package. It contains individual guides for each of the 36 learning materials. The guide gives the titles of the materials, format, objectives of the materials, messages, target groups, and an overview of the content of each learning materials. The methodologies used for teaching the learning materials include role playing, group discussion, questioning, brainstorming, survey, creative writing, problem-solving and evaluation. The package will be used by fieldworkers to conduct island-based population education courses. full text

Practical fundamentals of glass, rubber, and plastic sterile packaging systems.

PubMed

Sacha, Gregory A; Saffell-Clemmer, Wendy; Abram, Karen; Akers, Michael J

2010-01-01

Sterile product packaging systems consist of glass, rubber, and plastic materials that are in intimate contact with the formulation. These materials can significantly affect the stability of the formulation. The interaction between the packaging materials and the formulation can also affect the appropriate delivery of the product. Therefore, a parenteral formulation actually consists of the packaging system as well as the product that it contains. However, the majority of formulation development time only considers the product that is contained in the packaging system. Little time is spent studying the interaction of the packaging materials with the contents. Interaction between the packaging and the contents only becomes a concern when problems are encountered. For this reason, there are few scientific publications that describe the available packaging materials, their advantages and disadvantages, and their important product attributes. This article was created as a reference for product development and describes some of the packaging materials and systems that are available for parenteral products.

The Importance of Take-Out Food Packaging Attributes: Conjoint Analysis and Quality Function Deployment Approach

NASA Astrophysics Data System (ADS)

Lestari Widaningrum, Dyah

2014-03-01

This research aims to investigate the importance of take-out food packaging attributes, using conjoint analysis and QFD approach among consumers of take-out food products in Jakarta, Indonesia. The conjoint results indicate that perception about packaging material (such as paper, plastic, and polystyrene foam) plays the most important role overall in consumer perception. The clustering results that there is strong segmentation in which take-out food packaging material consumer consider most important. Some consumers are mostly oriented toward the colour of packaging, while another segment of customers concerns on packaging shape and packaging information. Segmentation variables based on packaging response can provide very useful information to maximize image of products through the package's impact. The results of House of Quality development described that Conjoint Analysis - QFD is a useful combination of the two methodologies in product development, market segmentation, and the trade off between customers' requirements in the early stages of HOQ process

Interactive Multimedia Package in Ameliorating Communicative Skill in English

ERIC Educational Resources Information Center

Singaravelu, G.

2011-01-01

The study enlightens the effectiveness of Interactive-Multimedia Package in developing communicative skill in English at standard VI. Present methods of developing communicative skill are ineffective to the students in improving their communicative competencies in English. Challenging interactive Multimedia Package helps to enhance the…

Recent advances in biopolymers and biopolymer-based nanocomposites for food packaging materials.

PubMed

Tang, X Z; Kumar, P; Alavi, S; Sandeep, K P

2012-01-01

Plastic packaging for food and non-food applications is non-biodegradable, and also uses up valuable and scarce non-renewable resources like petroleum. With the current focus on exploring alternatives to petroleum and emphasis on reduced environmental impact, research is increasingly being directed at development of biodegradable food packaging from biopolymer-based materials. The proposed paper will present a review of recent developments in biopolymer-based food packaging materials including natural biopolymers (such as starches and proteins), synthetic biopolymers (such as poly lactic acid), biopolymer blends, and nanocomposites based on natural and synthetic biopolymers. The paper will discuss the various techniques that have been used for developing cost-effective biodegradable packaging materials with optimum mechanical strength and oxygen and moisture barrier properties. This is a timely review as there has been a recent renewed interest in research studies, both in the industry and academia, towards development of a new generation of biopolymer-based food packaging materials with possible applications in other areas.

Job satisfaction and importance for intensive care unit research coordinators: results from binational survey.

PubMed

Rickard, Claire M; Roberts, Brigit L; Foote, Jonathon; McGrail, Matthew R

2007-09-01

To measure Intensive Care Unit Research coordinator job satisfaction and importance and to identify priorities for role development. Research coordinator numbers are growing internationally in response to increasing clinical research activity. In Australia, 1% of registered nurses work principally in research, many as Research coordinators. Internationally, the Association of Clinical Research Professionals currently has 6536 certified Research coordinators in 13 countries, with likely additional large numbers practicing without the voluntary certification. Research coordinators are almost always nurses, but little is know about this emerging specialty. Design. Cross-sectional study using anonymous self-report questionnaire. After ethics approval, the McCloskey-Mueller Satisfaction Scale and McCloskey-Mueller Importance Scale were administered via the Internet. The sample was 49 (response rate 71%) Research coordinators from the Australia and New Zealand Intensive Care Unit Research coordinators' Interest Group. Research coordinators were satisfied with structural aspects of the position working business hours; flexibility of working hours; high levels of responsibility and control over their work. Dissatisfaction was expressed regarding: remuneration and recognition; compensation for weekend work; salary package; career advancement opportunities; and childcare facilities. High priorities for role development are those rated highly important but with much lower satisfaction. These are: compensation for weekend call-out work; salary and remuneration package; recognition by management and clinicians; career advancement opportunities; departmental research processes; encouragement and feedback; and number of working hours. Increasing numbers of nurses have been attracted to this clinically based research position. These data contribute to the understanding and development of the role.

The comparison of antimicrobial packaging properties with different applications incorporation method of active material

NASA Astrophysics Data System (ADS)

Anwar, R. W.; Sugiarto; Warsiki, E.

2018-03-01

Contamination after the processing of products during storage, distribution and marketing is one of the main causes of food safety issues. Handling of food products after processing can be done during the packaging process. Antimicrobial (AM) active packaging is one of the concept of packaging product development by utilize the interaction between the product and the packaging environment that can delay the bacterial damage by killing or reducing bacterial growth. The active system is formed by incorporating an antimicrobial agent against a packaging matrix that will function as a carrier. Many incorporation methods have been developed in this packaging-making concept which were direct mixing, polishing, and encapsulation. The aims of this research were to examine the different of the AM packaging performances including its stability and effectiveness of its function that would be produced by three different methods. The stability of the packaging function was analyzed by looking at the diffusivity of the active ingredient to the matrix using SEM. The effectiveness was analyzed by the ability of the packaging to prevent the growing of the microbial. The results showed that different incorporation methods resulted on different characteristics of the AM packaging.

Comparison of TAPS Packages for Engineering

ERIC Educational Resources Information Center

Sidhu, S. Manjit

2008-01-01

Purpose: This paper aims to present the development of technology-assisted problem solving (TAPS) packages at University Tenaga Nasional (UNITEN). The project is the further work of the development of interactive multimedia based packages targeted for students having problems in understanding the subject of engineering mechanics dynamics.…

Development and validation of a comprehensive model for map of fruits based on enzyme kinetics theory and arrhenius relation.

PubMed

Mangaraj, S; K Goswami, T; Mahajan, P V

2015-07-01

MAP is a dynamic system where respiration of the packaged product and gas permeation through the packaging film takes place simultaneously. The desired level of O2 and CO2 in a package is achieved by matching film permeation rates for O2 and CO2 with respiration rate of the packaged product. A mathematical model for MAP of fresh fruits applying enzyme kinetics based respiration equation coupled with the Arrhenious type model was developed. The model was solved numerically using MATLAB programme. The model was used to determine the time to reach to the equilibrium concentration inside the MA package and the level of O2 and CO2 concentration at equilibrium state. The developed model for prediction of equilibrium O2 and CO2 concentration was validated using experimental data for MA packaging of apple, guava and litchi.

Tree Classification Software

NASA Technical Reports Server (NTRS)

Buntine, Wray

1993-01-01

This paper introduces the IND Tree Package to prospective users. IND does supervised learning using classification trees. This learning task is a basic tool used in the development of diagnosis, monitoring and expert systems. The IND Tree Package was developed as part of a NASA project to semi-automate the development of data analysis and modelling algorithms using artificial intelligence techniques. The IND Tree Package integrates features from CART and C4 with newer Bayesian and minimum encoding methods for growing classification trees and graphs. The IND Tree Package also provides an experimental control suite on top. The newer features give improved probability estimates often required in diagnostic and screening tasks. The package comes with a manual, Unix 'man' entries, and a guide to tree methods and research. The IND Tree Package is implemented in C under Unix and was beta-tested at university and commercial research laboratories in the United States.

Developing a Decision-Making Plan for the Reading Teacher. Learning Package No. 25.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on developing a decision-making plan for the reading teacher is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on…

An economic perspective on Malawi's medical "brain drain".

PubMed

Record, Richard; Mohiddin, Abdu

2006-12-18

The medical "brain drain" has been described as rich countries "looting" doctors and nurses from developing countries undermining their health systems and public health. However this "brain-drain" might also be seen as a success in the training and "export" of health professionals and the benefits this provides. This paper illustrates the arguments and possible policy options by focusing on the situation in one of the poorest countries in the world, Malawi. Many see this "brain drain" of medical staff as wrong with developed countries exploiting poorer ones. The effects are considerable with Malawi facing high vacancy rates in its public health system, and with migration threatening to outstrip training despite efforts to improve pay and conditions. This shortage of staff has made it more challenging for Malawi to deliver on its Essential Health Package and to absorb new international health funding.Yet, without any policy effort Malawi has been able to demonstrate its global competitiveness in the training ("production") of skilled health professionals. Remittances from migration are a large and growing source of foreign exchange for poor countries and tend to go directly to households. Whilst the data for Malawi is limited, studies from other poor countries demonstrate the power of remittances in significantly reducing poverty. Malawi can benefit from the export of health professionals provided there is a resolution of the situation whereby the state pays for training and the benefits are gained by the individual professional working abroad. Solutions include migrating staff paying back training costs, or rich host governments remitting part of a tax (e.g. income or national insurance) to the Malawi government. These schemes would allow Malawi to scale up training of health professionals for local needs and to work abroad. There is concern about the negative impacts of the medical "brain-drain". However a closer look at the evidence for and against the medical "brain-drain" in Malawi suggests that there are potential gains in managing medical migration to produce outcomes that are beneficial to individuals, households and the country. Finally we present several policy options.

An economic perspective on Malawi's medical "brain drain"

PubMed Central

Record, Richard; Mohiddin, Abdu

2006-01-01

Background The medical "brain drain" has been described as rich countries "looting" doctors and nurses from developing countries undermining their health systems and public health. However this "brain-drain" might also be seen as a success in the training and "export" of health professionals and the benefits this provides. This paper illustrates the arguments and possible policy options by focusing on the situation in one of the poorest countries in the world, Malawi. Discussion Many see this "brain drain" of medical staff as wrong with developed countries exploiting poorer ones. The effects are considerable with Malawi facing high vacancy rates in its public health system, and with migration threatening to outstrip training despite efforts to improve pay and conditions. This shortage of staff has made it more challenging for Malawi to deliver on its Essential Health Package and to absorb new international health funding. Yet, without any policy effort Malawi has been able to demonstrate its global competitiveness in the training ("production") of skilled health professionals. Remittances from migration are a large and growing source of foreign exchange for poor countries and tend to go directly to households. Whilst the data for Malawi is limited, studies from other poor countries demonstrate the power of remittances in significantly reducing poverty. Malawi can benefit from the export of health professionals provided there is a resolution of the situation whereby the state pays for training and the benefits are gained by the individual professional working abroad. Solutions include migrating staff paying back training costs, or rich host governments remitting part of a tax (e.g. income or national insurance) to the Malawi government. These schemes would allow Malawi to scale up training of health professionals for local needs and to work abroad. Summary There is concern about the negative impacts of the medical "brain-drain". However a closer look at the evidence for and against the medical "brain-drain" in Malawi suggests that there are potential gains in managing medical migration to produce outcomes that are beneficial to individuals, households and the country. Finally we present several policy options. PMID:17176457

Implementing a framework for goal setting in community based stroke rehabilitation: a process evaluation.

PubMed

Scobbie, Lesley; McLean, Donald; Dixon, Diane; Duncan, Edward; Wyke, Sally

2013-05-24

Goal setting is considered 'best practice' in stroke rehabilitation; however, there is no consensus regarding the key components of goal setting interventions or how they should be optimally delivered in practice. We developed a theory-based goal setting and action planning framework (G-AP) to guide goal setting practice. G-AP has 4 stages: goal negotiation, goal setting, action planning & coping planning and appraisal & feedback. All stages are recorded in a patient-held record. In this study we examined the implementation, acceptability and perceived benefits of G-AP in one community rehabilitation team with people recovering from stroke. G-AP was implemented for 6 months with 23 stroke patients. In-depth interviews with 8 patients and 8 health professionals were analysed thematically to investigate views of its implementation, acceptability and perceived benefits. Case notes of interviewed patients were analysed descriptively to assess the fidelity of G-AP implementation. G-AP was mostly implemented according to protocol with deviations noted at the planning and appraisal and feedback stages. Each stage was felt to make a useful contribution to the overall process; however, in practice, goal negotiation and goal setting merged into one stage and the appraisal and feedback stage included an explicit decision making component. Only two issues were raised regarding G-APs acceptability: (i) health professionals were concerned about the impact of goal non-attainment on patient's well-being (patients did not share their concerns), and (ii) some patients and health professionals found the patient-held record unhelpful. G-AP was felt to have a positive impact on patient goal attainment and professional goal setting practice. Collaborative partnerships between health professionals and patients were apparent throughout the process. G-AP has been perceived as both beneficial and broadly acceptable in one community rehabilitation team; however, implementation of novel aspects of the framework was inconsistent. The regulatory function of goal non-attainment and the importance of creating flexible partnerships with patients have been highlighted. Further development of the G-AP framework, training package and patient held record is required to address the specific issues highlighted by this process evaluation. Further evaluation of G-AP is required across diverse community rehabilitation settings.

Space shuttle food system study: Food and beverage package development, modification 8S

NASA Technical Reports Server (NTRS)

1976-01-01

A new, highly utile rehydration package was developed for foods in zero gravity. Rehydratable foods will become more acceptable as a result of their overall rehydration capability and improved palatability. This new package design is greatly enhanced by the specified spacecraft condition of atmospheric pressure; the pressure differential between the atmosphere and the package carries the functional responsibility for rapid food rehydration without excess package manipulation by the consumer. Crew acceptance will further be enhanced by less manipulation, hotter rehydration water temperatures and the ability to hold the foods at preparation temperatures until they are consumed.

Trends in Food Packaging.

ERIC Educational Resources Information Center

Ott, Dana B.

1988-01-01

This article discusses developments in food packaging, processing, and preservation techniques in terms of packaging materials, technologies, consumer benefits, and current and potential food product applications. Covers implications due to consumer life-style changes, cost-effectiveness of packaging materials, and the ecological impact of…

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

PubMed

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

KMWin – A Convenient Tool for Graphical Presentation of Results from Kaplan-Meier Survival Time Analysis

PubMed Central

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Background Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. Results On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. Conclusions We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups. PMID:22723912

Youth Work Training Package Review: More of the Same or Radical Rationalisation?

ERIC Educational Resources Information Center

Corney, Tim; Broadbent, Robyn

2007-01-01

The development of a national youth work training package in Australia began over 15 years ago. The current package sits under the umbrella of the general Community Services Industry Training Package. The first stage of a review of this package has been completed and the subsequent report not only confirms the recent trend towards the…

Development and Use of an Open-Source, User-Friendly Package to Simulate Voltammetry Experiments

ERIC Educational Resources Information Center

Wang, Shuo; Wang, Jing; Gao, Yanjing

2017-01-01

An open-source electrochemistry simulation package has been developed that simulates the electrode processes of four reaction mechanisms and two typical electroanalysis techniques: cyclic voltammetry and chronoamperometry. Unlike other open-source simulation software, this package balances the features with ease of learning and implementation and…

Developing a Package Training System for Industry

ERIC Educational Resources Information Center

Battersby, D. L. N.

1974-01-01

The hotel and catering industry is one of Great Britain's largest. A packaged training system has been developed to satisfy the needs of this industry, an ever-growing occupational field with multiple categories. The material provided in each package outlines short pieces of instruction and helps the trainer create appropriate training. (DS)

Guide to using Cuechart, Tellagraf, and Disspla at ANL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertoncini, P.J.; Thommes, M.M.

1986-01-01

Guide to Curchart, Tellagraf, and Disspla at ANL provides information necessary for using the three ISSCO graphics packages at Argonne: Cuechart is a cue-and-response program available in CMS that aids users in creating bar charts, line charts, pie charts, and word charts. It is appropriate for users with little or no previous graphics experience. Cuechart provides much of the capability of Tellagraf without the user's having to learn Tellagraf commands. Tellagraf is a more powerful, easy-to-use graphics package also available in CMS. With a little training, scientists, administrators, and secretaries can produce sophisticated publication-quality log or linear plots, bar charts,more » pie charts, tables, or posters. Disspla is a more versatile and sophisticated graphics package. It is available in both CMS and batch and consists of several hundred Fortran-callable and PL/I-callable subroutines that will enable you to obtain professional quality plots. In addition to log or linear plots, bar charts, pie charts, and pages of text, Disspla provides subroutines for contour plots, 3-D plots, and world maps.« less

[Drug information for patients (Package Leaflets), and user testing in EU].

PubMed

Yamamoto, Michiko; Doi, Hirohisa; Furukawa, Aya

2015-01-01

Patients and consumers have desired high quality drug information in their pharmacotherapy, and are entitled to receive it. It is desirable that the information should be aimed at shared decision-making between patients and healthcare professionals about medications. The quality of drug information available to patients should also be assured. With an aim to improve the quality of "Drug Guide for Patients", we investigated Patient Information Leaflets (PILs) which are approved by the Medicines and Healthcare Products Regulatory Agency (MHRA) in the United Kingdom (UK) with regard to the criteria of development and user testing for assuring the quality of the PILs. In the European Union (EU), these are called Package Leaflets (PLs). PILs have been a legal requirement in the UK since 1999 for all medications. The user testing of PILs has been implemented as evidence since 2005 so that people can rely on the information provided in the leaflet. Execution of PILs which follow the guidance of the user testing, according to the guidance of this user testing, would reflect the views of patients. Here, we introduce the development process and implementation of user testing of PILs. In terms of readability, accessibility and understandability of drug information for patients, we need to discuss involving the public in decisions on how its quality should be assured and how it can be made easily be comprehensible for patients, in order to make effective use of "Drug Guide for Patients" in the future in Japan.

Factors associated with job satisfaction among commune health workers: implications for human resource policies.

PubMed

Tran, Bach Xuan; Van Hoang, Minh; Nguyen, Hinh Duc

2013-01-30

Job satisfaction among health workers is an important indicator in assessing the performance and efficiency of health services. This study measured job satisfaction and determined associated factors among health workers in 38 commune health stations in an urban district and a rural district of Hanoi, Vietnam. A total of 252 health workers (36 medical doctors and 216 nurses and technicians; 74% female) were interviewed. A job satisfaction measure was developed using factor analysis, from which four dimensions emerged, namely 'benefits and prospects,' 'facility and equipment,' 'performance,' and 'professionals.' The results demonstrate that respondents were least satisfied with the following categories: salary and incentives (24.0%), benefit packages (25.1%), equipment (35.7%), and environment (41.8%). The average satisfaction score was moderate across four domains; it was the highest for 'performance' (66.6/100) and lowest for 'facility and equipment' (50.4/100). Tobit-censored regression models, constructed using stepwise selection, determined significant predictors of job satisfaction including age, areas of work and expertise, professional education, urban versus rural setting, and sufficient number of staff. The findings highlight the need to implement health policies that focus on incentives, working conditions, workloads, and personnel management at grassroots level.

Basic analysis of reflectometry data software package for the analysis of multilayered structures according to reflectometry data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Astaf'ev, S. B., E-mail: bard@ns.crys.ras.ru; Shchedrin, B. M.; Yanusova, L. G.

2012-01-15

The main principles of developing the Basic Analysis of Reflectometry Data (BARD) software package, which is aimed at obtaining a unified (standardized) tool for analyzing the structure of thin multilayer films and nanostructures of different nature based on reflectometry data, are considered. This software package contains both traditionally used procedures for processing reflectometry data and the authors' original developments on the basis of new methods for carrying out and analyzing reflectometry experiments. The structure of the package, its functional possibilities, examples of application, and prospects of development are reviewed.

Instrument Packages for the Cold, Dark, High Radiation Environments

NASA Technical Reports Server (NTRS)

Clark, P. E.; Millar, P. S.; Yeh, P. S.; Beamna, B.; Brigham, D.; Feng, S.

2011-01-01

We are developing a small cold temperature instrument package concept that integrates a cold temperature power system and radhard ultra low temperature ultra low power electronics components and power supplies now under development into a cold temperature surface operational version of a planetary surface instrument package. We are already in the process of developing a lower power lower tem-perature version for an instrument of mutual interest to SMD and ESMD to support the search for volatiles (the mass spectrometer VAPoR, Volatile Analysis by Pyrolysis of Regolith) both as a stand alone instrument and as part of an environmental monitoring package.

Developments in blade shape design for a Darrieus vertical axis wind turbine

NASA Astrophysics Data System (ADS)

Ashwill, T. D.; Leonard, T. M.

1986-09-01

A new computer program package has been developed that determines the troposkein shape for a Darrieus Vertical Axis Wind Turbine Blade with any geometrical configuration or rotation rate. This package allows users to interact and develop a buildable blade whose shape closely approximates the troposkein. Use of this package can significantly reduce flatwise mean bending stresses in the blade and increase fatigue life.

Food packages for Space Shuttle

NASA Technical Reports Server (NTRS)

Fohey, M. F.; Sauer, R. L.; Westover, J. B.; Rockafeller, E. F.

1978-01-01

The paper reviews food packaging techniques used in space flight missions and describes the system developed for the Space Shuttle. Attention is directed to bite-size food cubes used in Gemini, Gemini rehydratable food packages, Apollo spoon-bowl rehydratable packages, thermostabilized flex pouch for Apollo, tear-top commercial food cans used in Skylab, polyethylene beverage containers, Skylab rehydratable food package, Space Shuttle food package configuration, duck-bill septum rehydration device, and a drinking/dispensing nozzle for Space Shuttle liquids. Constraints and testing of packaging is considered, a comparison of food package materials is presented, and typical Shuttle foods and beverages are listed.

Sustainable practice change: Professionals' experiences with a multisectoral child health promotion programme in Sweden

PubMed Central

2011-01-01

Background New methods for prevention and health promotion and are constantly evolving; however, positive outcomes will only emerge if these methods are fully adopted and sustainable in practice. To date, limited attention has been given to sustainability of health promotion efforts. This study aimed to explore facilitators, barriers, and requirements for sustainability as experienced by professionals two years after finalizing the development and implementation of a multisectoral child health promotion programme in Sweden (the Salut programme). Initiated in 2005, the programme uses a 'Salutogenesis' approach to support health-promoting activities in health care, social services, and schools. Methods All professionals involved in the Salut Programme's pilot areas were interviewed between May and September 2009, approximately two years after the intervention package was established and implemented. Participants (n = 23) were midwives, child health nurses, dental hygienists/dental nurses, and pre-school teachers. Transcribed data underwent qualitative content analysis to illuminate perceived facilitators, barriers, and requirements for programme sustainability. Results The programme was described as sustainable at most sites, except in child health care. The perception of facilitators, barriers, and requirements were largely shared across sectors. Facilitators included being actively involved in intervention development and small-scale testing, personal values corresponding to programme intentions, regular meetings, working close with collaborators, using manuals and a clear programme branding. Existing or potential barriers included insufficient managerial involvement and support and perceived constraints regarding time and resources. In dental health care, barriers also included conflicting incentives for performance. Many facilitators and barriers identified by participants also reflected their perceptions of more general and forthcoming requirements for programme sustainability. Conclusions These results contribute to the knowledge of processes involved in achieving sustainability in health promotion initiatives. Facilitating factors include involving front-line professionals in intervention development and using small scale testing; however, the success of a programme requires paying attention to the role of managerial support and an overall supportive system. In summary, these results emphasise the importance for both practitioners and researchers to pay attention to parallel processes at different levels in multidisciplinary improvement efforts intended to ensure sustainable practice change. PMID:21426583

The nurse, the Geneva Conventions and human rights.

PubMed

1992-01-01

Alleged reports from the warfronts over the past few years have been shocking: bombing of hospitals and ambulances, health workers refusing to care for wounded members of the opposition, medical involvement in the torture of prisoners, etc. Such conduct is in violation of professional codes of conduct and the Geneva Conventions. Yet the combatants and health care personnel in too many instances remain impervious. In many economically and politically unstable countries, where uprisings and war can explode any day, anyone can become involved, but particularly health care professionals because of the nature of their work. When confronted with a dilemma in a conflict situation, nurses must remember that they are accountable for their own professional actions and as such must be aware of patient/client rights and of their rights and obligations under the terms of the Geneva Conventions of 1949 and the Additional Protocols of 1977. To assist nurses in making the right decisions, ICN developed a Code for Nurses and in 1984, with the League of Red Cross and Red Crescent Societies, prepared an educational package for nurses on the Geneva conventions and the principles of humanitarian law. Subsequently ICN, with its member nurses' associations, developed position papers on the role of nurses in caring for prisoners and detainees and in safeguarding human rights. And today in face of daily reports of humanitarian violations, ICN urges NNAs to reconfirm their commitment and to take concrete moves to assure that their members fully understand what is expected of nurses in conflict situations. Extracts of the Geneva Conventions' essential provisions and ICN's position statements are provided below as one step in bringing about this awareness.

Mapping of initiatives to increase membership in mutual health organizations in Benin.

PubMed

Turcotte-Tremblay, Anne-Marie; Haddad, Slim; Yacoubou, Ismaïlou; Fournier, Pierre

2012-12-05

Mutual health organizations (MHO) have been implemented across Africa to increase access to healthcare and improve financial protection. Despite efforts to develop MHOs, low levels of both initial enrolment and membership renewals continue to threaten their financial viability. The purpose of this study was to map initiatives implemented to increase the pool of MHO members in Benin. A multiple case study was conducted to assess MHOs supported by five major promoters in Benin. Three months of fieldwork resulted in 23 semi-structured interviews and two focus groups with MHO promoters, technicians, elected members, and health professionals affiliated with the MHOs. Fifteen non-structured interviews provided additional information and a valuable source of triangulation. MHOs have adopted a wide range of initiatives targeting different entry points and involving a variety of stakeholders. Initiatives have included new types of collective health insurance packages and efforts to raise awareness by going door-to-door and organizing health education workshops. Different types of partnerships have been established to strengthen relationships with healthcare professionals and political leaders. However, the selection and implementation of these initiatives have been limited by insufficient financial and human resources. The study highlights the importance of prioritizing sustainable strategies to increase MHO membership. No single MHO initiative has been able to resolve the issue of low membership on its own. If combined, existing initiatives could provide a comprehensive and inclusive approach that would target all entry points and include key stakeholders such as household decision-makers, MHO elected members, healthcare professionals, community leaders, governmental authorities, medical advisors, and promoters. There is a need to evaluate empirically the implementation of these interventions. Mechanisms to promote dialogue between MHO stakeholders would be useful to devise innovative strategies, avoid repeating unsuccessful ones, and develop a coordinated plan to promote MHOs.

77 FR 14445 - Leakage Tests on Packages for Shipment of Radioactive Material

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NUCLEAR REGULATORY COMMISSION [NRC-2011-0045] Leakage Tests on Packages for Shipment of..., ``Leakage Tests on Packages for Radioactive Material.'' ADDRESSES: You can access publicly available... Materials--Leakage Tests on Packages for Shipment'' approved February 1998. The NRC staff developed and...

An Object-Oriented Serial DSMC Simulation Package

NASA Astrophysics Data System (ADS)

Liu, Hongli; Cai, Chunpei

2011-05-01

A newly developed three-dimensional direct simulation Monte Carlo (DSMC) simulation package, named GRASP ("Generalized Rarefied gAs Simulation Package"), is reported in this paper. This package utilizes the concept of simulation engine, many C++ features and software design patterns. The package has an open architecture which can benefit further development and maintenance of the code. In order to reduce the engineering time for three-dimensional models, a hybrid grid scheme, combined with a flexible data structure compiled by C++ language, are implemented in this package. This scheme utilizes a local data structure based on the computational cell to achieve high performance on workstation processors. This data structure allows the DSMC algorithm to be very efficiently parallelized with domain decomposition and it provides much flexibility in terms of grid types. This package can utilize traditional structured, unstructured or hybrid grids within the framework of a single code to model arbitrarily complex geometries and to simulate rarefied gas flows. Benchmark test cases indicate that this package has satisfactory accuracy for complex rarefied gas flows.

XAPiir: A recursive digital filtering package

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, D.

1990-09-21

XAPiir is a basic recursive digital filtering package, containing both design and implementation subroutines. XAPiir was developed for the experimental array processor (XAP) software package, and is written in FORTRAN. However, it is intended to be incorporated into any general- or special-purpose signal analysis program. It replaces the older package RECFIL, offering several enhancements. RECFIL is used in several large analysis programs developed at LLNL, including the seismic analysis package SAC, several expert systems (NORSEA and NETSEA), and two general purpose signal analysis packages (SIG and VIEW). This report is divided into two sections: the first describes the use ofmore » the subroutine package, and the second, its internal organization. In the first section, the filter design problem is briefly reviewed, along with the definitions of the filter design parameters and their relationship to the subroutine input parameters. In the second section, the internal organization is documented to simplify maintenance and extensions to the package. 5 refs., 9 figs.« less

Implementation and use of direct-flow connections in a coupled ground-water and surface-water model

USGS Publications Warehouse

Swain, Eric D.

1994-01-01

The U.S. Geological Survey's MODFLOW finite-difference ground-water flow model has been coupled with three surface-water packages - the MODBRANCH, River, and Stream packages - to simulate surface water and its interaction with ground water. Prior to the development of the coupling packages, the only interaction between these modeling packages was that leakage values could be passed between MODFLOW and the three surface-water packages. To facilitate wider and more flexible uses of the models, a computer program was developed and added to MODFLOW to allow direct flows or stages to be passed between any of the packages and MODFLOW. The flows or stages calculated in one package can be set as boundary discharges or stages to be used in another package. Several modeling packages can be used in the same simulation depending upon the level of sophistication needed in the various reaches being modeled. This computer program is especially useful when any of the River, Stream, or MODBRANCH packages are used to model a river flowing directly into or out of wetlands in direct connection with the aquifer and represented in the model as an aquifer block. A field case study is shown to illustrate an application.

Literacity: A multimedia adult literacy package combining NASA technology, recursive ID theory, and authentic instruction theory

NASA Technical Reports Server (NTRS)

Willis, Jerry; Willis, Dee Anna; Walsh, Clare; Stephens, Elizabeth; Murphy, Timothy; Price, Jerry; Stevens, William; Jackson, Kevin; Villareal, James A.; Way, Bob

1994-01-01

An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application under development is LiteraCity, a simulation-based instructional package for adults who do not have functional reading skills. Using fuzzy logic routines and other technologies developed by NASA's Information Systems Directorate and hypermedia sound, graphics, and animation technologies the project attempts to overcome the limited impact of adult literacy assessment and instruction by involving the adult in an interactive simulation of real-life literacy activities. The project uses a recursive instructional development model and authentic instruction theory. This paper describes one component of a project to design, develop, and produce a series of computer-based, multimedia instructional packages. The packages are being developed for use in adult literacy programs, particularly in correctional education centers. They use the concepts of authentic instruction and authentic assessment to guide development. All the packages to be developed are instructional simulations. The first is a simulation of 'finding a friend a job.'

MEMS packaging: state of the art and future trends

NASA Astrophysics Data System (ADS)

Bossche, Andre; Cotofana, Carmen V. B.; Mollinger, Jeff R.

1998-07-01

Now that the technology for Integrated sensor and MEMS devices has become sufficiently mature to allow mass production, it is expected that the prices of bare chips will drop dramatically. This means that the package prices will become a limiting factor in market penetration, unless low cost packaging solutions become available. This paper will discuss the developments in packaging technology. Both single-chip and multi-chip packaging solutions will be addressed. It first starts with a discussion on the different requirements that have to be met; both from a device point of view (open access paths to the environment, vacuum cavities, etc.) and from the application point of view (e.g. environmental hostility). Subsequently current technologies are judged on their applicability for MEMS and sensor packaging and a forecast is given for future trends. It is expected that the large majority of sensing devices will be applied in relative friendly environments for which plastic packages would suffice. Therefore, on the short term an important role is foreseen for recently developed plastic packaging techniques such as precision molding and precision dispensing. Just like in standard electronic packaging, complete wafer level packaging methods for sensing devices still have a long way to go before they can compete with the highly optimized and automated plastic packaging processes.

Delidding and resealing hybrid microelectronic packages

NASA Astrophysics Data System (ADS)

Luce, W. F.

1982-05-01

The objective of this single phase MM and T contract was to develop the manufacturing technology necessary for the precision removal (delidding) and replacement (resealing) of covers on hermetically sealed hybrid microelectronic packages. The equipment and processes developed provide a rework technique which does not degrade the reliability of the package of the enclosed circuitry. A qualification test was conducted on 88 functional hybrid packages, with excellent results. A petition will be filed, accompanied by this report, requesting Mil-M-38510 be amended to allow this rework method.

The challenges of packaging combination devices.

PubMed

Mankel, George

2008-01-01

This article focuses on the development of a packaging format for drug eluting stents where the package not only has to meet the needs of the stent, but also the needs of the drug incorporated into its polymer coating. The package has to allow the transfer of ethylene oxide gas for sterilisation, but when in storage, must provide a barrier to keep out moisture and oxygen. A pouch and commercial scale manufacturing process were developed to incorporate this dual function into one item.

Research and Development of Fully Automatic Alien Smoke Stack and Packaging System

NASA Astrophysics Data System (ADS)

Yang, Xudong; Ge, Qingkuan; Peng, Tao; Zuo, Ping; Dong, Weifu

2017-12-01

The problem of low efficiency of manual sorting packaging for the current tobacco distribution center, which developed a set of safe efficient and automatic type of alien smoke stack and packaging system. The functions of fully automatic alien smoke stack and packaging system adopt PLC control technology, servo control technology, robot technology, image recognition technology and human-computer interaction technology. The characteristics, principles, control process and key technology of the system are discussed in detail. Through the installation and commissioning fully automatic alien smoke stack and packaging system has a good performance and has completed the requirements for shaped cigarette.

Contamination in food from packaging material.

PubMed

Lau, O W; Wong, S K

2000-06-16

Packaging has become an indispensible element in the food manufacturing process, and different types of additives, such as antioxidants, stabilizers, lubricants, anti-static and anti-blocking agents, have also been developed to improve the performance of polymeric packaging materials. Recently the packaging has been found to represent a source of contamination itself through the migration of substances from the packaging into food. Various analytical methods have been developed to analyze the migrants in the foodstuff, and migration evaluation procedures based on theoretical prediction of migration from plastic food contact material were also introduced recently. In this paper, the regulatory control, analytical methodology, factors affecting the migration and migration evaluation are reviewed.

Moving towards Universal Health Coverage through the Development of Integrated Service Delivery Packages for Primary Health Care in the Solomon Islands

PubMed Central

Whiting, Stephen; Postma, Sjoerd; Jamshaid de Lorenzo, Ayesha; Aumua, Audrey

2016-01-01

The Solomon Islands Government is pursuing integrated care with the goal of improving the quality of health service delivery to rural populations. Under the auspices of Universal Health Coverage, integrated service delivery packages were developed which defined the clinical and public health services that should be provided at different levels of the health system. The process of developing integrated service delivery packages helped to identify key policy decisions the government needed to make in order to improve service quality and efficiency. The integrated service delivery packages have instigated the revision of job descriptions and are feeding into the development of a human resource plan for health. They are also being used to guide infrastructure development and health system planning and should lead to better management of resources. The integrated service delivery packages have become a key tool to operationalise the government’s policy to move towards a more efficient, equitable, quality and sustainable health system. PMID:28321177

Trends in antimicrobial food packaging systems: Emitting sachets and absorbent pads

USDA-ARS?s Scientific Manuscript database

Active antimicrobial packaging interacts with packaged food and headspace to reduce, retard, or even inhibit the growth of spoilage and pathogenic microorganisms. Sachets and pads are one of the most successful applications of active food packaging. This review discusses recent developments of antim...

Radio Astronomy Tools in Python: Spectral-cube, pvextractor, and more

NASA Astrophysics Data System (ADS)

Ginsburg, A.; Robitaille, T.; Beaumont, C.; Rosolowsky, E.; Leroy, A.; Brogan, C.; Hunter, T.; Teuben, P.; Brisbin, D.

2015-12-01

The radio-astro-tools organization has been established to facilitate development of radio and millimeter analysis tools by the scientific community. The first packages developed under its umbrella are: • The spectral-cube package, for reading, writing, and analyzing spectral data cubes • The pvextractor package for extracting position-velocity slices from position-position-velocity cubes along aribitrary paths • The radio-beam package to handle gaussian beams in the context of the astropy quantity and unit framework • casa-python to enable installation of these packages - and any other - into users' CASA environments without conflicting with the underlying CASA package. Community input in the form of code contributions, suggestions, questions and commments is welcome on all of these tools. They can all be found at http://radio-astro-tools.github.io.

Development and characterization of a packaging cell line for pseudo-infectious yellow fever virus particle generation.

PubMed

Queiroz, Sabrina Ribeiro de Almeida; Silva Júnior, José Valter Joaquim; Silva, Andréa Nazaré Monteiro Rangel da; Carvalho, Amanda Gomes de Oliveira; Santos, Jefferson José da Silva; Gil, Laura Helena Vega Gonzales

2018-01-01

Pseudo-infectious yellow fever viral particles (YFV-PIVs) have been used to study vaccines and viral packaging. Here, we report the development of a packaging cell line, which expresses the YFV prM/E proteins. HEK293 cells were transfected with YFV prM/E and C (84 nt) genes to generate HEK293-YFV-PrM/E-opt. The cells were evaluated for their ability to express the heterologous proteins and to package the replicon repYFV-17D-LucIRES, generating YFV-PIVs. The expression of prM/E proteins was confirmed, and the cell line trans-packaged the replicon for recovery of a reporter for the YFV-PIVs. HEK293-YFV-prM/E-opt trans-packaging capacity demonstrates its possible biotechnology application.

Patients in need of medicine information.

PubMed

Kazaryan, I; Sevikyan, A

2015-01-01

Reliable medicine information is important not only for physicians and pharmacists, but also for patients [6]. However, the results of studies implemented in some countries show that patients may have slightly different needs and preferences in using sources of information [1, 4, 5, 7]. The main objective of patient medicines information is assisting consumers to achieve safe and effective use of pharmaceuticals [2, 3]. To identify patients' needs in medicine information and sources they use to receive it. We interviewed 1059 people who had visited community pharmacies in 10 regions of Armenia and Yerevan. Previously developed questionnaire was used for interviewing patients. Statistical analysis was conducted using SPSS program. We found that consumers need medicine information. 68.9% of respondents often use pharmaceuticals only if necessary medicines information is available. The majority of them believe that it is important to have information about therapeutic indications of pharmaceuticals to be used (91.8%), their dosage and method of administration (91.1%), contraindications (82.4%), adverse reactions (81.9%) and the simultaneous use of multiple medicines (76.5%). 58.9% of consumers value information about medicine's price. More than 70% of patients often seek information from health professionals and use medicines package information leaflets (PIL), and more than 75% of respondents mainly trust the same sources. 71.5% of respondents read package leaflets, while 42.0% of consumers do this several times. Only 36.7% of respondents completely understand information in a leaflet. Patients in Armenia need medicine information. They prefer to receive information from sources they trust.Many patients do not understand the content of package information leaflets (PILs) due to barriers, which can be removed by introducing appropriate regulatory provisions for their content and readability.

NEWS: TRUMP resources

NASA Astrophysics Data System (ADS)

Swinbank, Elizabeth

2000-05-01

Support for astronomy in A-level physics aslogo Help is at hand for teachers and students choosing astronomy as part of A-level physics. The Teaching Resources Unit for Modern Physics (TRUMP) has produced a resource package covering all the astronomical options in the Edexcel, OCR and AQA (NEAB) syllabuses. The forerunner to TRUMP was the project that produced the highly successful Particle Physics Pack, sponsored by the Institute of Physics, which was instrumental in introducing particle physics into A-level syllabuses. The TRUMP Astrophysics Resource Package fills a gap between the colourful stimulus of popular materials on the one hand, and professional texts on the other. But this is not just another A-level textbook; the six-part resource pack has a similar structure and purpose to the Particle Physics Pack. It provides over 400 pages of comprehensive information for teachers, building on their existing subject knowledge and bringing them up to date as well as giving suggestions for teaching and notes on syllabus coverage. The package includes nearly 40 photocopiable sheets for students. The emphasis is on the physics that underpins the astronomy. There are details of student activities requiring no specialist equipment beyond that normally found in A-level labs, exercises using authentic data, and plenty of questions (all with worked solutions). The development of the TRUMP Astrophysics Package was funded by the Nuffield Foundation, the Particle Physics and Astronomy Research Council, the Institute of Physics and York University. The package is available by mail order, price £48 (inc. UK p&p) from the TRUMP Project, Science Education Group, University of York, Heslington, York YO10 5DD. Some parts may be purchased separately; for details contact the project's director, Elizabeth Swinbank (tel: 01904 434537, fax: 01904 434078, e-mail: es14@york.ac.uk) or consult the web page www.york.ac.uk/org/seg/trump. The BaBar experiment balogo In the spring of 1999, scientists began to collect data from the BaBar experiment - an international collaboration involving the UK, several other European countries and the USA. The experiment is designed to throw light on the puzzling question of why there is so little antimatter in the universe and so much matter. The TRUMP BaBar resource package brings the mystery of antimatter into schools. There are notes and colourful posters on the physics of BaBar, and photocopiable sheets supporting student activities. These include explorations of symmetry, templates for making a scale model of the BaBar detector, and a web-based research project. The pack is designed mainly for A-level physics (particularly those courses that include some particle physics) but parts also relate to GCSE science, Scottish Higher physics and Standard physics. The BaBar resource package is available free from the Particle Physics and Astronomy Research Council, which fully funded its development and production. Contact the Publicity Team, PPARC, Polaris House, North Star Avenue, Swindon, Wiltshire SN2 1SZ (tel: 01973 442123, e-mail: pr_pus@pparc.ac.uk).

Efficacy of Multimedia Package in Communicative Skill in English

ERIC Educational Resources Information Center

Singaravelu, G.

2014-01-01

The study enlightens the effectiveness of Multimedia Package in learning communicative skill in English. Objectives of the study: To prepare a Multimedia Package for developing communicative skill in English. To find out the impact of Multimedia Package in improving communicative skill in English. Quasi Experimental method was adopted in the…

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

Healthcare professionals' perceptions related to the provision of clinical pharmacy services in the public health sector of Mexico: a case study.

PubMed

Díaz de León-Castañeda, Christian; Gutiérrez-Godínez, Jéssica; Colado-Velázquez, Juventino Iii; Toledano-Jaimes, Cairo

2018-04-22

In Mexico, the Modelo Nacional de Farmacia Hospitalaria (MNFH, or National Hospital Pharmacy Model), published in 2009, mainly aims to promote the provision of clinical pharmacy services in private and public hospitals. However, there is little scientific documentation about the quality of these services. To explore healthcare professionals' perceptions related to the quality of clinical pharmacy services provision. A case-study based on a qualitative approach was performed at the pharmaceutical services unit at a public hospital located in Mexico City, which operates under the administrative control of the Ministry of Health. Donabedian's conceptual model was adapted to explore health care professionals' perceptions of the quality of clinical pharmacy services provision. Semi-structured interviews were carried out with pharmacists, physicians and nurses and then transcribed and analyzed via discourse analysis and codification techniques, using the software package Atlas. ti. Limitations in pharmaceutical human resources were identified as the main factor affecting coverage and quality in clinical pharmacy services provision. However, the development in pharmacy staff of technical competences and skills for clinical pharmacy service provision were recognized. Significant improvements in the rational use of medicines were associated with clinical pharmacy services provision. The perception analysis performed in this study suggested that it is necessary to increase pharmacy staff in order to improve interprofessional relationships and the quality of clinical pharmacy services provision. Copyright © 2018 Elsevier Inc. All rights reserved.

Safety Alerts: An Observational Study in Portugal.

PubMed

Soares, Sara; Roque, Fátima; Teixeira Rodrigues, António; Figueiras, Adolfo; Herdeiro, Maria Teresa

2015-09-01

The information that is available when marketing authorizations are approved is limited. Pharmacovigilance has an important role during the postauthorization period, and alerts published by national authorities allow health care professionals to be informed about new data on safety profiles. This study therefore sought to analyze all safety alerts published by the Portuguese National Authority of Medicines and Health Products I.P. (INFARMED). We conducted an observational study of all alerts published on the INFARMED website from January 2002 through December 2014. From the data included in the alerts, the following information was abstracted: active substance name (and trade name), event that led to the alert, and the resulting safety measures. Active substances were classified according to the Anatomical Therapeutic Chemical (ATC) code. A total of 562 alerts were published, and 304 were eligible for inclusion. The musculoskeletal system was the ATC code with more alerts (n = 53), followed by the nervous system (n = 42). Communication of the information and recommendations to the health care professionals and the public in general was the most frequent safety measure (n = 128), followed by changes in the Summary of the Product Characteristics and package information leaflet (n = 66). During the study period, 26 marketing authorizations were temporarily suspended and 10 were revoked. The knowledge of the alerts published during the postmarketing period is very useful to the health care professionals for improving prescription and use of medicines and to the scientific community for the development of new researches. Copyright © 2015 Elsevier HS Journals, Inc. All rights reserved.

Wheelchair service provision education in academia.

PubMed

Fung, Karen H; Rushton, Paula W; Gartz, Rachel; Goldberg, Mary; Toro, Maria L; Seymour, Nicky; Pearlman, Jonathan

2017-01-01

An estimated 70 million people with disabilities need wheelchairs. To address this global crisis, the World Health Organization (WHO) proposed an eight-step wheelchair service provision model to ensure service quality regardless of resource setting. The International Society of Wheelchair Professionals (ISWP) aims to facilitate the integration of the WHO eight-step model into professional rehabilitation programmes. To develop an enhanced understanding of the current wheelchair service provision education provided in professional rehabilitation programmes worldwide. In a cross-sectional design, an online survey was distributed to ISWP contacts of educational institutions. Quantitative responses were analysed through summary statistics and qualitative answers were analysed by content analyses. When relevant, educational institutions were stratified into resource settings. Seventy-two representatives of educational institutions in 21 countries completed the survey. Wheelchair content was taught in 79% of represented institutions, of which 75% of respondents reported using original course material, 10% of respondents used WHO Wheelchair Service Training Packages and 15% of respondents used other available resources. The majority of educational institutions teaching with their own wheelchair-related course material taught ≤ 20 hours. Fourteen of the 15 respondents without wheelchair education, expressed an interest in integrating wheelchair education into their academic curricula. The majority of the educational institutions teach wheelchair education; however, there is great variability in what and how it is taught and evaluated. The results demonstrate the need for more in-depth investigation regarding the integration process of wheelchair education in educational institutions, with the ultimate goal of improving wheelchair service provision worldwide.

pyam: Python Implementation of YaM

NASA Technical Reports Server (NTRS)

Myint, Steven; Jain, Abhinandan

2012-01-01

pyam is a software development framework with tools for facilitating the rapid development of software in a concurrent software development environment. pyam provides solutions for development challenges associated with software reuse, managing multiple software configurations, developing software product lines, and multiple platform development and build management. pyam uses release-early, release-often development cycles to allow developers to integrate their changes incrementally into the system on a continual basis. It facilitates the creation and merging of branches to support the isolated development of immature software to avoid impacting the stability of the development effort. It uses modules and packages to organize and share software across multiple software products, and uses the concepts of link and work modules to reduce sandbox setup times even when the code-base is large. One sidebenefit is the enforcement of a strong module-level encapsulation of a module s functionality and interface. This increases design transparency, system stability, and software reuse. pyam is written in Python and is organized as a set of utilities on top of the open source SVN software version control package. All development software is organized into a collection of modules. pyam packages are defined as sub-collections of the available modules. Developers can set up private sandboxes for module/package development. All module/package development takes place on private SVN branches. High-level pyam commands support the setup, update, and release of modules and packages. Released and pre-built versions of modules are available to developers. Developers can tailor the source/link module mix for their sandboxes so that new sandboxes (even large ones) can be built up easily and quickly by pointing to pre-existing module releases. All inter-module interfaces are publicly exported via links. A minimal, but uniform, convention is used for building modules.

Hypertext-based computer vision teaching packages

NASA Astrophysics Data System (ADS)

Marshall, A. David

1994-10-01

The World Wide Web Initiative has provided a means for providing hypertext and multimedia based information across the whole INTERNET. Many applications have been developed on such http servers. At Cardiff we have developed a http hypertext based multimedia server, the Cardiff Information Server, using the widely available Mosaic system. The server provides a variety of information ranging from the provision of teaching modules, on- line documentation, timetables for departmental activities to more light hearted hobby interests. One important and novel development to the server has been the development of courseware facilities. This ranges from the provision of on-line lecture notes, exercises and their solutions to more interactive teaching packages. A variety of disciplines have benefitted notably Computer Vision, and Image Processing but also C programming, X Windows, Computer Graphics and Parallel Computing. This paper will address the issues of the implementation of the Computer Vision and Image Processing packages, the advantages gained from using a hypertext based system and also will relate practical experiences of using the packages in a class environment. The paper addresses issues of how best to provide information in such a hypertext based system and how interactive image processing packages can be developed and integrated into courseware. The suite of tools developed facilitates a flexible and powerful courseware package that has proved popular in the classroom and over the Internet. The paper will also detail many future developments we see possible. One of the key points raised in the paper is that Mosaic's hypertext language (html) is extremely powerful and yet relatively straightforward to use. It is also possible to link in Unix calls so that programs and shells can be executed. This provides a powerful suite of utilities that can be exploited to develop many packages.

Packaging Concerns and Techniques for Large Devices: Challenges for Complex Electronics

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

NASA is going to have to accept the use of non-hermetic packages for complex devices. There are a large number of packaging options available. Space application subjects the packages to stresses that they were probably not designed for (vacuum for instance). NASA has to find a way of having assurance in the integrity of the packages. There are manufacturers interested in qualifying non-hermetic packages to MIL-PRF-38535 Class V. Government space users are agreed that Class V should be for hermetic packages only. NASA is working on a new Class for non-hermetic packages for M38535 Appendix B, "Class Y". Testing for package integrity will be required but can be package specific as described by a Package Integrity Test Plan. The plan is developed by the manufacturer and approved by DSCC and government space.

Retrofitting Las Vegas. Implementing Energy Efficiency in Two Las Vegas Test Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puttagunta, S.

2013-04-01

In 2009, the state of Nevada received nearly $40 million in Neighborhood Stabilization Funds from the Department of Housing and Urban Development to use to stabilize communities that have suffered from foreclosures and abandonment. In order to provide guidance to local officials and maximize how effectively this NSP funding is used in retrofitting homes, the CARB team provided design specifications, energy modeling, and technical support for the BARA team and its local partners—Better Building Performance, Nevada Energy Star Partners Green Alliance, and Home Free Nevada—for two retrofit test homes. One home demonstrated a modest retrofit and the other a deepmore » energy retrofit. This report describes the retrofit packages, which were used as an educational experience for home performance professionals, building trades, remodelers, and the general public.« less

Review: nanocomposites in food packaging.

PubMed

Arora, Amit; Padua, G W

2010-01-01

The development of nanocomposites is a new strategy to improve physical properties of polymers, including mechanical strength, thermal stability, and gas barrier properties. The most promising nanoscale size fillers are montmorillonite and kaolinite clays. Graphite nanoplates are currently under study. In food packaging, a major emphasis is on the development of high barrier properties against the migration of oxygen, carbon dioxide, flavor compounds, and water vapor. Decreasing water vapor permeability is a critical issue in the development of biopolymers as sustainable packaging materials. The nanoscale plate morphology of clays and other fillers promotes the development of gas barrier properties. Several examples are cited. Challenges remain in increasing the compatibility between clays and polymers and reaching complete dispersion of nanoplates. Nanocomposites may advance the utilization of biopolymers in food packaging.

Analysis of IUE spectra using the interactive data language

NASA Technical Reports Server (NTRS)

Joseph, C. L.

1981-01-01

The Interactive Data Language (IDL) is used to analyze high resolution spectra from the IUE. Like other interactive languages, IDL is designed for use by the scientist rather than the professional programmer, allowing him to conceive of his data as simple entities and to operate on this data with minimal difficulty. A package of programs created to analyze interstellar absorption lines is presented as an example of the graphical power of IDL.

An educational package that supports laycarers to safely manage breakthrough subcutaneous injections for home-based palliative care patients: development and evaluation of a service quality improvement.

PubMed

Healy, Sue; Israel, Fiona; Charles, Margaret A; Reymond, Liz

2013-06-01

Palliative care services strive to support people to live and die well in their chosen environment, with optimal symptom control and a pattern of care supportive of laycarers. The likelihood of patients remaining at home often depends upon laycarers, who may be required to manage subcutaneous medications. This study reports the development, trial and evaluation of a package that teaches laycarers to manage subcutaneous medications used for symptom control in home-based patients. The package was developed by palliative care stakeholders and comprises an educational session, delivered by nurses, and a range of demonstrative, audiovisual and written resources. The package was trialled across 24 sites and was evaluated by 76 laycarers (pre- and post-use) and 53 nurses (at study completion). Outcomes of primary interest were perceived global usefulness of the package and rated relevance of components. Laycarers and nurses rated the usefulness and relevance of the package highly - all means were above 5 on a 7-point scale. Also, laycarers were invited to comment on the package, and three focus groups for 26 nurses explored post hoc issues following package implementation. In terms of the palliative patient's illness trajectory, consensus was that the time for package introduction depended upon each particular clinical situation and laycarer. Nursing opinion was divided concerning whether it is safe and appropriate for laycarers to manage subcutaneous injections. Nevertheless, this study demonstrates that the package supports laycarers to manage subcutaneous medications. This has important implications for families, services and health-care systems.

Packaging for Food Service

NASA Technical Reports Server (NTRS)

Stilwell, E. J.

1985-01-01

Most of the key areas of concern in packaging the three principle food forms for the space station were covered. It can be generally concluded that there are no significant voids in packaging materials availability or in current packaging technology. However, it must also be concluded that the process by which packaging decisions are made for the space station feeding program will be very synergistic. Packaging selection will depend heavily on the preparation mechanics, the preferred presentation and the achievable disposal systems. It will be important that packaging be considered as an integral part of each decision as these systems are developed.

Gaps in food safety professionals' knowledge about noroviruses.

PubMed

Kosa, Katherine M; Cates, Sheryl C; Hall, Aron J; Brophy, Jenna E; Fraser, Angela

2014-08-01

Noroviruses (NoVs) are the most common etiologic agents of endemic and epidemic foodborne disease in the United States. Food safety professionals play an important role in protecting the public from foodborne illness. A survey of food safety professionals (n = 314) was conducted to characterize their knowledge of NoVs and to identify gaps in this knowledge. To recruit individuals, 25 professional organizations promoted the survey via their Web sites, newsletters, and/or e-mail distribution lists. The survey used true or false and open-ended questions to assess knowledge about NoVs, including attribution, transmission, and prevention and control strategies, including food handling practices. The online survey was available from mid-October 2012 to mid-January 2013. Of the 314 respondents, 66.2% correctly identified NoVs as one of the three most common causes of foodborne disease in the United States. Only 5.4% of respondents correctly identified the three most common settings for NoV infections, and 65.0% of respondents had the misperception that cruise ships are one of the three most common settings. Seventeen respondents (5.4%) answered all 20 true-or-false questions correctly, 33 respondents (10.5%) answered at least 19 of the 20 questions correctly, and 186 respondents (65.0%) answered at least 15 of the 20 questions correctly (i.e., a score of 75% or higher). The content domain in which respondents had the most incorrect answers was food handling practices. Thirty-eight percent of respondents incorrectly responded that it is safe for restaurant workers infected with NoVs to handle packaged food, food equipment, and utensils. About half of respondents did not know the recommended sanitizing solution for eliminating NoVs from a contaminated surface. The survey findings identified several important gaps in food safety professionals' knowledge of NoVs. The study results will inform the development of a Web-based educational module on NoVs to improve efforts to prevent the spread of NoVs in retail and institutional food establishments.

Gaps in Food Safety Professionals' Knowledge about Noroviruses

PubMed Central

Kosa, Katherine M.; Cates, Sheryl C.; Hall, Aron J.; Brophy, Jenna E.; Fraser, Angela

2017-01-01

Noroviruses (NoVs) are the most common etiologic agents of endemic and epidemic foodborne disease in the United States. Food safety professionals play an important role in protecting the public from foodborne illness. A survey of food safety professionals (n = 314) was conducted to characterize their knowledge of NoVs and to identify gaps in this knowledge. To recruit individuals, 25 professional organizations promoted the survey via their Web sites, newsletters, and/or e-mail distribution lists. The survey used true or false and open-ended questions to assess knowledge about NoVs, including attribution, transmission, and prevention and control strategies, including food handling practices. The online survey was available from mid-October 2012 to mid-January 2013. Of the 314 respondents, 66.2% correctly identified NoVs as one of the three most common causes of foodborne disease in the United States. Only 5.4% of respondents correctly identified the three most common settings for NoV infections, and 65.0% of respondents had the misperception that cruise ships are one of the three most common settings. Seventeen respondents (5.4%) answered all 20 true-or-false questions correctly, 33 respondents (10.5%) answered at least 19 of the 20 questions correctly, and 186 respondents (65.0%) answered at least 15 of the 20 questions correctly (i.e., a score of 75% or higher). The content domain in which respondents had the most incorrect answers was food handling practices. Thirty-eight percent of respondents incorrectly responded that it is safe for restaurant workers infected with NoVs to handle packaged food, food equipment, and utensils. About half of respondents did not know the recommended sanitizing solution for eliminating NoVs from a contaminated surface. The survey findings identified several important gaps in food safety professionals' knowledge of NoVs. The study results will inform the development of a Web-based educational module on NoVs to improve efforts to prevent the spread of NoVs in retail and institutional food establishments. PMID:25198594

High Temperature Pt/Alumina Co-Fired System for 500 C Electronic Packaging Applications

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Neudeck, Philip G.; Spry, David J.; Beheim, Glenn M.; Hunter, Gary W.

2015-01-01

Gold thick-film metallization and 96 alumina substrate based prototype packaging system developed for 500C SiC electronics and sensors is briefly reviewed, the needs of improvement are discussed. A high temperature co-fired alumina material system based packaging system composed of 32-pin chip-level package and printed circuit board is discussed for packaging 500C SiC electronics and sensors.

Integrated Approach to Industrial Packaging Design

NASA Astrophysics Data System (ADS)

Vorobeva, O.

2017-11-01

The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

Headspace volume and percentage of carbon monoxide affects carboxymyoglobin layer development of modified atmosphere packaged beef steaks.

PubMed

Raines, Christopher R; Hunt, Melvin C

2010-01-01

Carboxymyoglobin (COMb) development of beef Longissimus lumborum as related to molecular CO availability and package headspace volume was evaluated. Steaks from six pairs of USDA Select strip loins were packaged in modified atmosphere packages with 0.2%, 0.4%, or 0.8% CO and 30% CO(2) and balanced with N(2) to obtain meat-to-gas ratios of 0.4, 0.7, and 1.1, and CO molar concentrations of 0.07, 0.10, and 0.20 mMol. Steak redness (CIE a*), COMb layer thickness, percentage of CO in the headspace, visual display color, and bloom intensity scores were evaluated 4 and 7 d after packaging. Greater concentration of CO in a smaller headspace resulted in a thicker COMb layer compared with lesser concentration of CO in a larger headspace, regardless of moles CO available. The combined effects of concentration of CO and headspace volume had a greater impact on COMb development than millimoles of CO in the package headspace. Package headspace can be reduced and the concentration of CO can be increased without detriment to fresh beef color or consumer safety.

[The development and operation of a package inserts service system for electronic medical records].

PubMed

Yamada, Hidetoshi; Nishimura, Sachiho; Shimamori, Yoshimitsu; Sato, Seiji; Hayase, Yukitoshi

2003-03-01

To promote the appropriate use of pharmaceuticals and to prevent side effects, physicians need package inserts on medicinal drugs as soon as possible. A medicinal drug information service system was established for electronic medical records to speed up and increase the efficiency of package insert communications within a medical institution. Development of this system facilitates access to package inserts by, for example, physicians. The time required to maintain files of package inserts was shortened, and the efficiency of the drug information service increased. As a source of package inserts for this system, package inserts using a standard generalized markup language (SGML) form were used, which are accessible to the public on the homepage of the Organization for Pharmaceutical Safety and Research (OPSR). This study found that a delay occurred in communicating revised package inserts from pharmaceutical companies to the OPSR. Therefore a pharmaceutical department page was set up as part of the homepage of the medical institution for electronic medical records to shorten the delay in the revision of package inserts posted on the medicinal drug information service homepage of the OPSR. The usefulness of this package insert service system for electronic medical records is clear. For more effective use of this system based on the OPSR homepage pharmaceutical companies have been requested to provide quicker updating of package inserts.

Migration and sorption phenomena in packaged foods.

PubMed

Gnanasekharan, V; Floros, J D

1997-10-01

Rapidly developing analytical capabilities and continuously evolving stringent regulations have made food/package interactions a subject of intense research. This article focuses on: (1) the migration of package components such as oligomers and monomers, processing aids, additives, and residual reactants in to packaged foods, and (2) sorption of food components such as flavors, lipids, and moisture into packages. Principles of diffusion and thermodynamics are utilized to describe the mathematics of migration and sorption. Mathematical models are developed from first principles, and their applicability is illustrated using numerical simulations and published data. Simulations indicate that available models are system (polymer-penetrant) specific. Furthermore, some models best describe the early stages of migration/sorption, whereas others should be used for the late stages of these phenomena. Migration- and/or sorption-related problems with respect to glass, metal, paper-based and polymeric packaging materials are discussed, and their importance is illustrated using published examples. The effects of migrating and absorbed components on food safety, quality, and the environment are presented for various foods and packaging materials. The impact of currently popular packaging techniques such as microwavable, ovenable, and retortable packaging on migration and sorption are discussed with examples. Analytical techniques for investigating migration and sorption phenomena in food packaging are critically reviewed, with special emphasis on the use and characteristics of food-simulating liquids (FSLs). Finally, domestic and international regulations concerning migration in packaged foods, and their impact on food packaging is briefly presented.

RSEIS and RFOC: Seismic Analysis in R

NASA Astrophysics Data System (ADS)

Lees, J. M.

2015-12-01

Open software is essential for reproducible scientific exchange. R-packages provide a platform for development of seismological investigation software that can be properly documented and traced for data processing. A suite of R packages designed for a wide range of seismic analysis is currently available in the free software platform called R. R is a software platform based on the S-language developed at Bell Labs decades ago. Routines in R can be run as standalone function calls, or developed in object-oriented mode. R comes with a base set of routines, and thousands of user developed packages. The packages developed at UNC include subroutines and interactive codes for processing seismic data, analyzing geographic information (GIS) and inverting data involved in a variety of geophysical applications. On CRAN (Comprehensive R Archive Network, http://www.r-project.org/) currently available packages related to seismic analysis are RSEIS, Rquake, GEOmap, RFOC, zoeppritz, RTOMO, and geophys, Rwave, PEIP, hht, rFDSN. These include signal processing, data management, mapping, earthquake location, deconvolution, focal mechanisms, wavelet transforms, Hilbert-Huang Transforms, tomographic inversion, and Mogi deformation among other useful functionality. All software in R packages is required to have detailed documentation, making the exchange and modification of existing software easy. In this presentation, I will focus on packages RSEIS and RFOC, showing examples from a variety of seismic analyses. The R approach has similarities to the popular (and expensive) MATLAB platform, although R is open source and free to down load.

Opportunities for cellulose nanomaterials in packaging films: a review and future trends

Treesearch

Nicole M. Stark

2016-01-01

Performance requirements for packaging films may include barrier properties, transparency, flexibility, and tensile strength. Conventional packaging materials such as plastic films and laminates, are typically made from petroleum-based polymers. Currently, there is a drive to develop sustainable packaging materials. These alternative materials must be able to be...

An Interactive Computer Aided Electrical Engineering Education Package.

ERIC Educational Resources Information Center

Cavati, Cicero Romao

This paper describes an educational package to help the learning process. A case study is presented of an energy distribution course in the Electrical Engineering Department at the Federal University of Espirito Santo (UFES). The advantages of the developed package are shown by comparing it with the traditional academic book. This package presents…

Quartz/fused silica chip carriers

NASA Technical Reports Server (NTRS)

1992-01-01

The primary objective of this research and development effort was to develop monolithic microwave integrated circuit (MMIC) packaging which will operate efficiently at millimeter-wave frequencies. The packages incorporated fused silica as the substrate material which was selected due to its favorable electrical properties and potential performance improvement over more conventional materials for Ka-band operation. The first step towards meeting this objective is to develop a package that meets standard mechanical and thermal requirements using fused silica and to be compatible with semiconductor devices operating up to at least 44 GHz. The second step is to modify the package design and add multilayer and multicavity capacity to allow for application specific integrated circuits (ASIC's) to control multiple phase shifters. The final step is to adapt the package design to a phased array module with integral radiating elements. The first task was a continuation of the SBIR Phase 1 work. Phase 1 identified fused silica as a viable substrate material by demonstrating various plating, machining, and adhesion properties. In Phase 2 Task 1, a package was designed and fabricated to validate these findings. Task 2 was to take the next step in packaging and fabricate a multilayer, multichip module (MCM). This package is the predecessor to the phased array module and demonstrates the ability to via fill, circuit print, laminate, and to form vertical interconnects. The final task was to build a phased array module. The radiating elements were to be incorporated into the package instead of connecting to it with wire or ribbon bonds.

Radiometric packaging of uncooled bolometric infrared focal plane arrays

NASA Astrophysics Data System (ADS)

García-Blanco, Sonia; Pope, Timothy; Côté, Patrice; Leclerc, Mélanie; Ngo Phong, Linh; Châteauneuf, François

2017-11-01

INO has a wide experience in the design and fabrication of different kinds of microbolometer focal plane arrays (FPAs). In particular, a 512x3 pixel microbolometer FPA has been selected as the sensor for the New Infrared Sensor Technology (NIRST) instrument, one of the payloads of the SACD/Aquarius mission. In order to make the absolute temperature measurements necessary for many infrared Earth observation applications, the microbolometer FPA must be integrated into a package offering a very stable thermal environment. The radiometric packaging technology developed at INO presents an innovative approach since it was conceived to be modular and adaptable for the packaging of different microbolometer FPAs and for different sets of assembly requirements without need for requalification of the assembly process. The development of the radiometric packaging technology has broadened the position of INO as a supplier of radiometric detector modules integrating FPAs of microbolometers inside a radiometric package capable of achieving the requirements of different space missions. This paper gives an overview of the design of INO's radiometric package. Key performance parameters are also discussed and the test campaign conducted with the radiometric package is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, William Eugene

These slides describe different strategies for installing Python software. Although I am a big fan of Python software development, robust strategies for software installation remains a challenge. This talk describes several different installation scenarios. The Good: the user has administrative privileges - Installing on Windows with an installer executable, Installing with Linux application utility, Installing a Python package from the PyPI repository, and Installing a Python package from source. The Bad: the user does not have administrative privileges - Using a virtual environment to isolate package installations, and Using an installer executable on Windows with a virtual environment. The Ugly:more » the user needs to install an extension package from source - Installing a Python extension package from source, and PyCoinInstall - Managing builds for Python extension packages. The last item referring to PyCoinInstall describes a utility being developed for the COIN-OR software, which is used within the operations research community. COIN-OR includes a variety of Python and C++ software packages, and this script uses a simple plug-in system to support the management of package builds and installation.« less

Stop Stroke: development of an innovative intervention to improve risk factor management after stroke.

PubMed

Redfern, Judith; Rudd, Anthony D; Wolfe, Charles D A; McKevitt, Christopher

2008-08-01

Stroke survivors are at high risk of stroke recurrence yet current strategies to reduce recurrence risk are sub-optimal. The UK Medical Research Council (MRC) have proposed a framework for developing and evaluating complex interventions, such as community management of stroke secondary prevention. The Framework outlines a five-phased approach from theory through to implementation of effective interventions. This paper reports Phases I-III of the development of a novel intervention to improve risk factor management after stroke. The pre-clinical/theoretical phase entailed reviewing the literature and undertaking quantitative and qualitative studies to identify current practices and barriers to secondary prevention. In Phase I (modelling), findings were used to design an intervention with the potential to overcome barriers to effective stroke secondary prevention management. The feasibility of delivering the intervention and its acceptability were tested in the Phase II exploratory trial involving 25 stroke survivors and their general practitioners. This led to the development of the definitive risk factor management intervention. This comprises multiple components and involves using an on-going population stroke register to target patients, carers and health care professionals with tailored secondary prevention advice. Clinical, socio-demographic and service use data collected by the stroke register are transformed to provide an individualised secondary prevention package for patients, carers and health care professionals at three time points: within 10 weeks, 3 and 6 months post-stroke. The intervention is currently being evaluated in a randomised controlled trial. Further research is needed to test generalisability to other aspects of stroke management and for other chronic diseases. The MRC Framework for complex interventions provides a structured approach to guide the development of novel interventions in public health. Implications for practice in stroke secondary prevention will emerge when the results of our randomised controlled trial are published.

Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

ERIC Educational Resources Information Center

Candan, Sevcan; Erten, Sinan

2015-01-01

In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

Modification of cellulose nanocrystals (CNCs) for use in poly(lactic acid) (PLA)-CNC composite packaging products

Treesearch

Liqing Wei; Nicole M. Stark; Ronald C. Sabo; Laurent Matuana

2016-01-01

There is growing interest in developing bio-based materials for packaging. Bio-derived materials such as cellulose nanocrystals (CNCs) and poly(lactic acid) (PLA) can be used to develop sustainable packaging applications. Incorporating CNCs into PLA can increase the crystallinity and barrier properties of PLA. The challenge lies in both increasing the flexibility of...

The Evolution of Alternative Rural Development Strategies in Ethiopia; Implications for Employment and Income Distribution. African Rural Employment Paper No. 12.

ERIC Educational Resources Information Center

Tecle, Tesfai

As Ethiopia has designed and implemented numerous intensive (geographically concentrated) and minimum-package rural development programs between 1967-75, the purpose of this monograph is to: (1) trace the evolution of these package projects; (2) analyze package performances; and (3) identify the implications for Ethiopian planners and policy…

Development of Potent Antiviral Drugs Inspired by Viral Hexameric DNA-Packaging Motors with Revolving Mechanism

PubMed Central

Pi, Fengmei; Zhao, Zhengyi; Chelikani, Venkata; Yoder, Kristine; Kvaratskhelia, Mamuka

2016-01-01

The intracellular parasitic nature of viruses and the emergence of antiviral drug resistance necessitate the development of new potent antiviral drugs. Recently, a method for developing potent inhibitory drugs by targeting biological machines with high stoichiometry and a sequential-action mechanism was described. Inspired by this finding, we reviewed the development of antiviral drugs targeting viral DNA-packaging motors. Inhibiting multisubunit targets with sequential actions resembles breaking one bulb in a series of Christmas lights, which turns off the entire string. Indeed, studies on viral DNA packaging might lead to the development of new antiviral drugs. Recent elucidation of the mechanism of the viral double-stranded DNA (dsDNA)-packaging motor with sequential one-way revolving motion will promote the development of potent antiviral drugs with high specificity and efficiency. Traditionally, biomotors have been classified into two categories: linear and rotation motors. Recently discovered was a third type of biomotor, including the viral DNA-packaging motor, beside the bacterial DNA translocases, that uses a revolving mechanism without rotation. By analogy, rotation resembles the Earth's rotation on its own axis, while revolving resembles the Earth's revolving around the Sun (see animations at http://rnanano.osu.edu/movie.html). Herein, we review the structures of viral dsDNA-packaging motors, the stoichiometries of motor components, and the motion mechanisms of the motors. All viral dsDNA-packaging motors, including those of dsDNA/dsRNA bacteriophages, adenoviruses, poxviruses, herpesviruses, mimiviruses, megaviruses, pandoraviruses, and pithoviruses, contain a high-stoichiometry machine composed of multiple components that work cooperatively and sequentially. Thus, it is an ideal target for potent drug development based on the power function of the stoichiometries of target complexes that work sequentially. PMID:27356896

ATLAS software configuration and build tool optimisation

NASA Astrophysics Data System (ADS)

Rybkin, Grigory; Atlas Collaboration

2014-06-01

ATLAS software code base is over 6 million lines organised in about 2000 packages. It makes use of some 100 external software packages, is developed by more than 400 developers and used by more than 2500 physicists from over 200 universities and laboratories in 6 continents. To meet the challenge of configuration and building of this software, the Configuration Management Tool (CMT) is used. CMT expects each package to describe its build targets, build and environment setup parameters, dependencies on other packages in a text file called requirements, and each project (group of packages) to describe its policies and dependencies on other projects in a text project file. Based on the effective set of configuration parameters read from the requirements files of dependent packages and project files, CMT commands build the packages, generate the environment for their use, or query the packages. The main focus was on build time performance that was optimised within several approaches: reduction of the number of reads of requirements files that are now read once per package by a CMT build command that generates cached requirements files for subsequent CMT build commands; introduction of more fine-grained build parallelism at package task level, i.e., dependent applications and libraries are compiled in parallel; code optimisation of CMT commands used for build; introduction of package level build parallelism, i. e., parallelise the build of independent packages. By default, CMT launches NUMBER-OF-PROCESSORS build commands in parallel. The other focus was on CMT commands optimisation in general that made them approximately 2 times faster. CMT can generate a cached requirements file for the environment setup command, which is especially useful for deployment on distributed file systems like AFS or CERN VMFS. The use of parallelism, caching and code optimisation significantly-by several times-reduced software build time, environment setup time, increased the efficiency of multi-core computing resources utilisation, and considerably improved software developer and user experience.

Packaging Technologies for High Temperature Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

2013-01-01

This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500 C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550 C. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500 C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500 C are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

Packaging Technologies for High Temperature Electronics and Sensors

NASA Technical Reports Server (NTRS)

Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

2013-01-01

This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

Using System Architecture, Review Entry Criteria, and Standard Work Package Data to Enable Rapid Development of Integrated Master Schedules

DTIC Science & Technology

2016-03-01

ENTRY CRITERIA, AND STANDARD WORK PACKAGE DATA TO ENABLE RAPID DEVELOPMENT OF INTEGRATED MASTER SCHEDULES by Burton W. Porter Jr. March 2016...2. REPORT DATE March 2016 3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE USING SYSTEM ARCHITECTURE, REVIEW ENTRY ... ENTRY CRITERIA, AND STANDARD WORK PACKAGE DATA TO ENABLE RAPID DEVELOPMENT OF INTEGRATED MASTER SCHEDULES Burton W. Porter Jr. Civilian

Emerging Chitosan-Based Films for Food Packaging Applications.

PubMed

Wang, Hongxia; Qian, Jun; Ding, Fuyuan

2018-01-17

Recent years have witnessed great developments in biobased polymer packaging films for the serious environmental problems caused by the petroleum-based nonbiodegradable packaging materials. Chitosan is one of the most abundant biopolymers after cellulose. Chitosan-based materials have been widely applied in various fields for their biological and physical properties of biocompatibility, biodegradability, antimicrobial ability, and easy film forming ability. Different chitosan-based films have been fabricated and applied in the field of food packaging. Most of the review papers related to chitosan-based films are focusing on antibacterial food packaging films. Along with the advances in the nanotechnology and polymer science, numerous strategies, for instance direct casting, coating, dipping, layer-by-layer assembly, and extrusion, have been employed to prepare chitosan-based films with multiple functionalities. The emerging food packaging applications of chitosan-based films as antibacterial films, barrier films, and sensing films have achieved great developments. This article comprehensively reviews recent advances in the preparation and application of engineered chitosan-based films in food packaging fields.

Electrospun antimicrobial hybrid mats: Innovative packaging material for meat and meat-products.

PubMed

Amna, Touseef; Yang, Jieun; Ryu, Kyeong-Seon; Hwang, I H

2015-07-01

To prevent the development and spread of spoilage/pathogenic microorganisms via meat foodstuffs, antimicrobial nanocomposite packaging can serve as a potential alternative. The objective of this study was to develop a new class of antimicrobial hybrid packaging mat composed of biodegradable polyurethane supplemented with virgin olive oil and zinc oxide via electrospinning. Instead of mixing antimicrobial compounds directly with food, incorporation in packaging materials allows the functional effect at food surfaces where microbial activity is localized. The nanofibers were characterized by SEM, EDX, XRD and TEM. The antibacterial activity was tested against two common foodborne pathogens viz., Staphylococcus aureus and Salmonella typhimurium. The present results indicated that incorporation of olive oil in the polymer affected morphology of PU nanofibers and nanocomposite packaging were able to inhibit growth of pathogens. Thus; as-spun mat can be used as prospective antimicrobial packaging, which potentially reduces contamination of meat/meat-products. Moreover, introduced biodegradable packaging for meat products could serve to replace PVC films and simultaneously help to protect natural environment.

Reporting and publishing guidelines: article 12 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

PubMed

Wilson, Kevin C; Irwin, Richard S; File, Thomas M; Schünemann, Holger J; Guyatt, Gordon H; Rabe, Klaus F

2012-12-01

Professional societies, like many other organizations around the world, have recognized the need to use rigorous processes to ensure that health care recommendations are informed by the best available research evidence. This is the twelfth of a series of 14 articles that were prepared to advise guideline developers in respiratory and other diseases. This article discusses the reporting and publishing of guidelines. The authors formulated and discussed the following questions on the reporting and publishing of guidelines. (1) What should be reported in guidelines? (2) How should guidelines be written? (3) How should the bottom-line message be conveyed? (4) How should guidelines be packaged? (5) Where should guidelines be published? (6) Who benefits from the publication of guidelines? (7) What information should be vetted by the editor(s)? (8) How should guidelines be peer reviewed? We conducted a review of the literature, looking for systematic reviews and methodological research that addressed these questions, but we did not conduct a full systematic review. Our conclusions are based on the available evidence from the published literature and logical arguments from experienced guideline developers. There is little empirical evidence that addresses the reporting and publishing of guidelines. A standard format for reporting guidelines is desirable to ensure that guidelines are comprehensive and that all of the information necessary to judge their quality is presented. In addition, guidelines should contain concise evidence-based recommendations. To facilitate the use of guidelines by consumers, it is preferable to publish them in journals that serve the target audience and to package them in multiple ways. Editors and peer reviewers should ensure that reporting standards have been met, potential conflicts of interest have been adequately addressed and made public, and that the recommendations address important clinical questions.

Mindfulness-Based Cognitive Therapy: An Efficacy Study for Mental Health Care Staff.

PubMed

Askey-Jones, Ryan

2018-05-21

Burnout is a major concern within the NHS impacting negatively on mental healthcare professionals. Evidence suggests that burnout can lead to reduced productivity and reduced quality of care for patients. Mindfulness-based interventions (MBIs) have demonstrated effectiveness in mitigating burnout for healthcare professionals; however no previous research has directly reported correlations between burnout and mindfulness. Does mindfulness-based cognitive therapy (MBCT) reduce burnout amongst mental healthcare professionals and are there any direct correlations between mindfulness and burnout itself?. This effectiveness study evaluated a series of 8-week (MBCT) groups adapted for healthcare professionals. Participants completed the Maslach Burnout Inventory (MBI) and Friedberg Mindfulness Inventory (FMI) at pre, post and 6-month follow-up. Analysis revealed overall significance and large effect sizes on all three sub-scales of the MBI and the FMI. There were significant correlations in mindfulness when burnout was reduced. These results suggest that MBCT groups for healthcare professionals offer a promising intervention for reducing burnout. Occupational departments could consider MBI's as part of a package of care for mental health care staff as a preventative intervention or as a means of reducing burnout amongst healthcare staff. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Recent Developments in Film and Gas Research in Modified Atmosphere Packaging of Fresh Foods.

PubMed

Zhang, Min; Meng, Xiangyong; Bhandari, Bhesh; Fang, Zhongxiang

2016-10-02

Due to the rise of consumer's awareness of fresh foods to health, in the past few years, the consumption of fresh and fresh-cut produces has increased sturdily. Modified atmosphere packaging (MAP) possesses a potential to become one of the most appropriate technologies for packaging fresh and fresh-cut produces. The MAP has advantages of extending the shelf-life, preserving or stabilizing the desired properties of fresh produces, and convenience in handing and distribution. The success of MAP-fresh foods depends on many factors including types of fresh foods, storage temperature and humidity, gas composition, and the characteristics of package materials. This paper reviews the recent developments highlighting the most critical factors of film and gas on the quality of MAP fresh foods. Although the innovations and development of food packaging technology will continue to promote the development of novel MAP, concentrated research and endeavors from scientists and engineers are still important to the development of MAP that focuses on consumers' requirements, enhancing product quality, environmental friendly design, and cost-effective application.

Differential maneuvering simulator data reduction and analysis software

NASA Technical Reports Server (NTRS)

Beasley, G. P.; Sigman, R. S.

1972-01-01

A multielement data reduction and analysis software package has been developed for use with the Langley differential maneuvering simulator (DMS). This package, which has several independent elements, was developed to support all phases of DMS aircraft simulation studies with a variety of both graphical and tabular information. The overall software package is considered unique because of the number, diversity, and sophistication of the element programs available for use in a single study. The purpose of this paper is to discuss the overall DMS data reduction and analysis package by reviewing the development of the various elements of the software, showing typical results that can be obtained, and discussing how each element can be used.

General specifications for the development of a USL NASA PC R and D statistical analysis support package

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Bassari, Jinous; Triantafyllopoulos, Spiros

1984-01-01

The University of Southwestern Louisiana (USL) NASA PC R and D statistical analysis support package is designed to be a three-level package to allow statistical analysis for a variety of applications within the USL Data Base Management System (DBMS) contract work. The design addresses usage of the statistical facilities as a library package, as an interactive statistical analysis system, and as a batch processing package.

Problem-based learning: effects on student’s scientific reasoning skills in science

NASA Astrophysics Data System (ADS)

Wulandari, F. E.; Shofiyah, N.

2018-04-01

This research aimed to develop instructional package of problem-based learning to enhance student’s scientific reasoning from concrete to formal reasoning skills level. The instructional package was developed using the Dick and Carey Model. Subject of this study was instructional package of problem-based learning which was consisting of lesson plan, handout, student’s worksheet, and scientific reasoning test. The instructional package was tried out on 4th semester science education students of Universitas Muhammadiyah Sidoarjo by using the one-group pre-test post-test design. The data of scientific reasoning skills was collected by making use of the test. The findings showed that the developed instructional package reflecting problem-based learning was feasible to be implemented in classroom. Furthermore, through applying the problem-based learning, students could dominate formal scientific reasoning skills in terms of functionality and proportional reasoning, control variables, and theoretical reasoning.

Alumina Based 500 C Electronic Packaging Systems and Future Development

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu

2012-01-01

NASA space and aeronautical missions for probing the inner solar planets as well as for in situ monitoring and control of next-generation aeronautical engines require high-temperature environment operable sensors and electronics. A 96% aluminum oxide and Au thick-film metallization based packaging system including chip-level packages, printed circuit board, and edge-connector is in development for high temperature SiC electronics. An electronic packaging system based on this material system was successfully tested and demonstrated with SiC electronics at 500 C for over 10,000 hours in laboratory conditions previously. In addition to the tests in laboratory environments, this packaging system has more recently been tested with a SiC junction field effect transistor (JFET) on low earth orbit through the NASA Materials on the International Space Station Experiment 7 (MISSE7). A SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE7 suite to International Space Station via a Shuttle mission and tested on the orbit for eighteen months. A summary of results of tests in both laboratory and space environments will be presented. The future development of alumina based high temperature packaging using co-fired material systems for improved performance at high temperature and more feasible mass production will also be discussed.

The Basis System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubois, P.F.

1989-05-16

This paper discusses the basis system. Basis is a program development system for scientific programs. It has been developed over the last five years at Lawrence Livermore National Laboratory (LLNL), where it is now used in about twenty major programming efforts. The Basis System includes two major components, a program development system and a run-time package. The run-time package provides the Basis Language interpreter, through which the user does input, output, plotting, and control of the program's subroutines and functions. Variables in the scientific packages are known to this interpreter, so that the user may arbitrarily print, plot, and calculatemore » with, any major program variables. Also provided are facilities for dynamic memory management, terminal logs, error recovery, text-file i/o, and the attachment of non-Basis-developed packages.« less

Food Packaging Materials

NASA Technical Reports Server (NTRS)

1978-01-01

The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

Streamlining ICAT development through off-the shelf hypermedia systems

NASA Technical Reports Server (NTRS)

Orey, Michael; Trent, Ann; Young, James; Sanders, Michael

1993-01-01

This project examined the efficacy of building intelligent computer assisted training using an off-the-shelf hypermedia package. In addition, we compared this package to an architecture that had been developed in a previous contract which was based in the C programming language. One person developed a tutor in LinkWay (an off-the-shelf hypermedia system) and another developed the same tutor using the ALM C-based architecture. Development times, ease of use, learner preferences, learner options, and learning effectiveness were compared. In all cases, the off-the-shelf package was shown to be superior to the C-based system.

ICT and the paperboard and packaging industry

Treesearch

Peter Ince; Sanna Kallioranta; Richard Vlosky

2005-01-01

The purpose of this chapter is to describe the reasons for the development of ICT and e-business systems in the paper and paperboard packaging industry and to discuss future scenarios that may serve to guide forest- sector research in this topical area. The paper and paperboard packaging industry encompasses producers of primary paper and paperboard packaging materials...

Vulnerability of point-of-care test reagents and instruments to environmental stresses: implications for health professionals and developers.

PubMed

Louie, Richard F; Ferguson, William J; Curtis, Corbin M; Vy, John H; Kost, Gerald J

2014-03-01

Strategic integration of point-of-care (POC) diagnostic tools during crisis response can accelerate triage and improve management of victims. Timely differential diagnosis is essential wherever care is provided to rule out or rule in disease, expedite life-saving treatment, and improve utilization of limited resources. POC testing needs to be accurate in any environment in which it is used. Devices are exposed to potentially adverse storage and operating conditions, such as high/low temperature and humidity during emergencies and field rescues. Therefore, characterizing environmental conditions allows technology developers, operators, and responders to understand the broad operational requirements of test reagents, instruments, and equipment in order to improve the quality and delivery of care in complex emergencies, disasters, and austere environmental settings. This review aims to describe the effects of environmental stress on POC testing performance and its impact on decision-making, to describe how to study the effects, and to summarize ways to mitigate the effects of environmental stresses through good laboratory practice, development of robust reagents, and novel thermal packaging solutions.

Participatory interaction design in user requirements specification in healthcare.

PubMed

Martikainen, Susanna; Ikävalko, Pauliina; Korpela, Mikko

2010-01-01

Healthcare information systems are accused of poor usability even in the popular media in Finland. Doctors especially have been very critical and actively expressed their opinions in public. User involvement and user-centered design methods are seen as the key solution to usability problems. In this paper we describe a research case where participatory methods were experimented within healthcare information systems development in medicinal care in a hospital. The study was part of a larger research project on Activity-driven Information Systems Development in healthcare. The study started by finding out about and modeling the present state of medicinal care in the hospital. After that it was important to define and model the goal state. The goal state, facilitated by the would-be software package, was modeled with the help of user interface drawings as one way of prototyping. Traditional usability methods were extended during the study. According to the health professionals' feedback, the use of participatory and user-centered interaction design methods, particularly user interface drawings enabled them to describe their requirements and create common understanding with the system developers.

Use of active management of the third stage of labour in seven developing countries.

PubMed

Stanton, Cynthia; Armbruster, Deborah; Knight, Rod; Ariawan, Iwan; Gbangbade, Sourou; Getachew, Ashebir; Portillo, Jose Angel; Jarquin, Douglas; Marin, Flor; Mfinanga, Sayoka; Vallecillo, Jesus; Johnson, Hope; Sintasath, David

2009-03-01

To document the use of active management of the third stage of labour for preventing postpartum haemorrhage and to explore factors associated with such use in seven developing countries. Nationally representative samples of facility-based deliveries were selected and observed to determine the use of active management of the third stage of labour and associated factors. Policies on active management were assessed through document review and interviews with relevant professionals. Use of a uterotonic during the third or fourth stages of labour was nearly universal. Correct use of active management of the third stage of labour was found in only 0.5% to 32% of observed deliveries due to multiple deficiencies in practice. In every country except Indonesia, policies regarding active management were conflicting. Developing countries have not targeted decreasing postpartum haemorrhage as an achievable goal; there is little use of active management of the third stage of labour, and policies regarding such management often conflict. Studies are needed to identify the most effective components of active management so that the most efficient package of practices can be promoted.

Maintaining psychology's scientific and professional credibility and ethical responsibility to self-regulate: a comment on "validations" of mental health assessment instruments.

PubMed

Moras, Karla

2005-03-01

Recent growth of "managed" mental health care in the United States has spawned huge demand for products that draw on one of psychology's most well developed subdisciplines, tests and measurement. The commercial potential of mental health assessment instruments intended for widespread use, to meet what Kraus, Seligman, and Jordan (this volume) describe as "an industry-wide surge in outcome evaluations in naturalistic ... settings," necessarily raises conflict of interest dilemmas for those who develop and market them. The American Psychological Association has devoted intensive effort to the preceding issue as it pertains to other aspects of the science and practice of clinical psychology. Comparable attention has not been focused recently on the development and marketing of assessment instruments. This Comment highlights the issue and suggests types of self-regulatory actions that might be taken, e.g., requiring and publishing full disclosure statements of authors' relationships to companies that market instruments like the Treatment Outcome Package in psychometric articles in which they are evaluated. 2004 Wiley Periodicals, Inc.

Advancements in meat packaging.

PubMed

McMillin, Kenneth W

2017-10-01

Packaging of meat provides the same or similar benefits for raw chilled and processed meats as other types of food packaging. Although air-permeable packaging is most prevalent for raw chilled red meat, vacuum and modified atmosphere packaging offer longer shelf life. The major advancements in meat packaging have been in the widely used plastic polymers while biobased materials and their integration into composite packaging are receiving much attention for functionality and sustainability. At this time, active and intelligent packaging are not widely used for antioxidant, antimicrobial, and other functions to stabilize and enhance meat properties although many options are being developed and investigated. The advances being made in nanotechnology will be incorporated into food packaging and presumably into meat packaging when appropriate and useful. Intelligent packaging using sensors for transmission of desired information and prompting of subsequent changes in packaging materials, environments or the products to maintain safety and quality are still in developmental stages. Copyright © 2017 Elsevier Ltd. All rights reserved.

NDE Software Developed at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Roth, Donald J.; Martin, Richard E.; Rauser, Richard W.; Nichols, Charles; Bonacuse, Peter J.

2014-01-01

NASA Glenn Research Center has developed several important Nondestructive Evaluation (NDE) related software packages for different projects in the last 10 years. Three of the software packages have been created with commercial-grade user interfaces and are available to United States entities for download on the NASA Technology Transfer and Partnership Office server (https://sr.grc.nasa.gov/). This article provides brief overviews of the software packages.

LavaNet—Neural network development environment in a general mine planning package

NASA Astrophysics Data System (ADS)

Kapageridis, Ioannis Konstantinou; Triantafyllou, A. G.

2011-04-01

LavaNet is a series of scripts written in Perl that gives access to a neural network simulation environment inside a general mine planning package. A well known and a very popular neural network development environment, the Stuttgart Neural Network Simulator, is used as the base for the development of neural networks. LavaNet runs inside VULCAN™—a complete mine planning package with advanced database, modelling and visualisation capabilities. LavaNet is taking advantage of VULCAN's Perl based scripting environment, Lava, to bring all the benefits of neural network development and application to geologists, mining engineers and other users of the specific mine planning package. LavaNet enables easy development of neural network training data sets using information from any of the data and model structures available, such as block models and drillhole databases. Neural networks can be trained inside VULCAN™ and the results be used to generate new models that can be visualised in 3D. Direct comparison of developed neural network models with conventional and geostatistical techniques is now possible within the same mine planning software package. LavaNet supports Radial Basis Function networks, Multi-Layer Perceptrons and Self-Organised Maps.

Neural Network Prototyping Package Within IRAF

NASA Technical Reports Server (NTRS)

Bazell, David

1997-01-01

The purpose of this contract was to develop a neural network package within the IRAF environment to allow users to easily understand and use different neural network algorithms the analysis of astronomical data. The package was developed for use within IRAF to allow portability to different computing environments and to provide a familiar and easy to use interface with the routines. In addition to developing the software and supporting documentation, we planned to use the system for the analysis of several sample problems to prove its viability and usefulness.

Deep sequencing of foot-and-mouth disease virus reveals RNA sequences involved in genome packaging.

PubMed

Logan, Grace; Newman, Joseph; Wright, Caroline F; Lasecka-Dykes, Lidia; Haydon, Daniel T; Cottam, Eleanor M; Tuthill, Tobias J

2017-10-18

Non-enveloped viruses protect their genomes by packaging them into an outer shell or capsid of virus-encoded proteins. Packaging and capsid assembly in RNA viruses can involve interactions between capsid proteins and secondary structures in the viral genome as exemplified by the RNA bacteriophage MS2 and as proposed for other RNA viruses of plants, animals and human. In the picornavirus family of non-enveloped RNA viruses, the requirements for genome packaging remain poorly understood. Here we show a novel and simple approach to identify predicted RNA secondary structures involved in genome packaging in the picornavirus foot-and-mouth disease virus (FMDV). By interrogating deep sequencing data generated from both packaged and unpackaged populations of RNA we have determined multiple regions of the genome with constrained variation in the packaged population. Predicted secondary structures of these regions revealed stem loops with conservation of structure and a common motif at the loop. Disruption of these features resulted in attenuation of virus growth in cell culture due to a reduction in assembly of mature virions. This study provides evidence for the involvement of predicted RNA structures in picornavirus packaging and offers a readily transferable methodology for identifying packaging requirements in many other viruses. Importance In order to transmit their genetic material to a new host, non-enveloped viruses must protect their genomes by packaging them into an outer shell or capsid of virus-encoded proteins. For many non-enveloped RNA viruses the requirements for this critical part of the viral life cycle remain poorly understood. We have identified RNA sequences involved in genome packaging of the picornavirus foot-and-mouth disease virus. This virus causes an economically devastating disease of livestock affecting both the developed and developing world. The experimental methods developed to carry out this work are novel, simple and transferable to the study of packaging signals in other RNA viruses. Improved understanding of RNA packaging may lead to novel vaccine approaches or targets for antiviral drugs with broad spectrum activity. Copyright © 2017 Logan et al.

Packaging of MEMS/MOEMS and nanodevices: reliability, testing, and characterization aspects

NASA Astrophysics Data System (ADS)

Tekin, Tolga; Ngo, Ha-Duong; Wittler, Olaf; Bouhlal, Bouchaib; Lang, Klaus-Dieter

2011-02-01

The last decade witnessed an explosive growth in research and development efforts devoted to MEMS devices and packaging. The successfully developed MEMS devices are, for example inkjet, pressure sensors, silicon microphones, accelerometers, gyroscopes, MOEMS, micro fuel cells and emerging MEMS. For the next decade, MEMS/MOEMS and nanodevice based products will penetrate into IT, telecommunications, automotive, defense, life sciences, medical and implantable applications. Forecasts say the MEMS market to be $14 billion by 2012. The packaging cost of MEMS/MOEMS products in general is about 70 percent. Unlike today's electronics IC packaging, their packaging are custom-built and difficult due to the moving structural elements. In order for the moving elements of a MEMS device to move effectively in a well-controlled atmosphere, hermetic sealing of the MEMS device in a cap is necessary. For some MEMS devices, such as resonators and gyroscopes, vacuum packaging is required. Usually, the cap is processed at the wafer level, and thus MEMS packaging is truly a wafer level packaging. In terms of MEMS/MOEMS and nanodevice packaging, there are still many critical issues need to be addressed due to the increasing integration density supported by 3D heterogeneous integration of multi-physic components/layers consisting of photonics, electronics, rf, plasmonics, and wireless. The infrastructure of MEMS/MOEMS and nanodevices and their packaging is not well established yet. Generic packaging platform technologies are not available. Some of critical issues have been studied intensively in the last years. In this paper we will discuss about processes, reliability, testing and characterization of MEMS/MOEMS and nanodevice packaging.

Optimization and Control of Burning Plasmas Through High Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pankin, Alexei

This project has revived the FACETS code, that has been developed under SciDAC fund- ing in 2008-2012. The code has been dormant for a number of years after the SciDAC funding stopped. FACETS depends on external packages. The external packages and libraries such as PETSc, FFTW, HDF5 and NETCDF that are included in FACETS have evolved during these years. Some packages in FACETS are also parts of other codes such as PlasmaState, NUBEAM, GACODES, and UEDGE. These packages have been also evolved together with their host codes which include TRANSP, TGYRO and XPTOR. Finally, there is also a set ofmore » packages in FACETS that are being developed and maintained by Tech-X. These packages include BILDER, SciMake, and FcioWrappers. Many of these packages evolved significantly during the last several years and FACETS had to be updated to synchronize with the re- cent progress in the external packages. The PI has introduced new changes to the BILDER package to support the updated interfaces to the external modules. During the last year of the project, the FACETS version of the UEDGE code has been extracted from FACETS as a standalone package. The PI collaborates with the scientists from LLNL on the updated UEDGE model in FACETS. Drs. T. Rognlien, M. Umansky and A. Dimits from LLNL are contributing to this task.« less

NCTE (National Council of Teachers of English) Guide to Teaching Materials for English, Grades 7-12; An Annotated Listing of Textbooks and Related Materials for Secondary Schools Prepared by the NCTE Staff. 1975-76 Supplement.

ERIC Educational Resources Information Center

National Council of Teachers of English, Urbana, IL.

This supplement to the "NCTE Guide to Teaching Materials for English, Grades 7-12" contains annotations for English anthologies, textbooks, workbooks, multimedia packages, and other materials for the junior high and high school levels. Works of literature, audiovisual materials, and professional publications are included when related to specific,…

Attributes of quality in audiovisual materials for health professionals.

PubMed

Suter, E; Waddell, W H

1981-07-01

Utilizing a series of meetings and incorporating individual efforts of producers, evaluators, and users of audiovisual materials; an attempt has been made to define the quality of an instructional item. Attributes of quality in content, instructional design, technical production, and packaging of audiovisual materials are addressed through questions about general criteria that permit expression of individual dictates off creativity and taste. These attributes of quality are intended for use by the producers and evaluators of audiovisual instruction.

Obsessive Compulsive Treatment Efficacy Trial (OCTET) comparing the clinical and cost effectiveness of self-managed therapies: study protocol for a randomised controlled trial.

PubMed

Gellatly, Judith; Bower, Peter; McMillan, Dean; Roberts, Christopher; Byford, Sarah; Bee, Penny; Gilbody, Simon; Arundel, Catherine; Hardy, Gillian; Barkham, Michael; Reynolds, Shirley; Gega, Lina; Mottram, Patricia; Lidbetter, Nicola; Pedley, Rebecca; Peckham, Emily; Connell, Janice; Molle, Jo; O'Leary, Neil; Lovell, Karina

2014-07-10

UK National Institute of Health and Clinical Excellence guidelines for obsessive compulsive disorder (OCD) specify recommendations for the treatment and management of OCD using a stepped care approach. Steps three to six of this model recommend treatment options for people with OCD that range from low-intensity guided self-help (GSH) to more intensive psychological and pharmacological interventions. Cognitive behavioural therapy (CBT), including exposure and response prevention, is the recommended psychological treatment. However, whilst there is some preliminary evidence that self-managed therapy packages for OCD can be effective, a more robust evidence base of their clinical and cost effectiveness and acceptability is required. Our proposed study will test two different self-help treatments for OCD: 1) computerised CBT (cCBT) using OCFighter, an internet-delivered OCD treatment package; and 2) GSH using a book. Both treatments will be accompanied by email or telephone support from a mental health professional. We will evaluate the effectiveness, cost and patient and health professional acceptability of the treatments. This study will provide more robust evidence of efficacy, cost effectiveness and acceptability of self-help treatments for OCD. If cCBT and/or GSH prove effective, it will provide additional, more accessible treatment options for people with OCD. Current Controlled Trials: ISRCTN73535163. Date of registration: 5 April 2011.

IN-PACKAGE CHEMISTRY ABSTRACTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Thomas

2005-07-14

This report was developed in accordance with the requirements in ''Technical Work Plan for Postclosure Waste Form Modeling'' (BSC 2005 [DIRS 173246]). The purpose of the in-package chemistry model is to predict the bulk chemistry inside of a breached waste package and to provide simplified expressions of that chemistry as a function of time after breach to Total Systems Performance Assessment for the License Application (TSPA-LA). The scope of this report is to describe the development and validation of the in-package chemistry model. The in-package model is a combination of two models, a batch reactor model, which uses the EQ3/6more » geochemistry-modeling tool, and a surface complexation model, which is applied to the results of the batch reactor model. The batch reactor model considers chemical interactions of water with the waste package materials, and the waste form for commercial spent nuclear fuel (CSNF) waste packages and codisposed (CDSP) waste packages containing high-level waste glass (HLWG) and DOE spent fuel. The surface complexation model includes the impact of fluid-surface interactions (i.e., surface complexation) on the resulting fluid composition. The model examines two types of water influx: (1) the condensation of water vapor diffusing into the waste package, and (2) seepage water entering the waste package as a liquid from the drift. (1) Vapor-Influx Case: The condensation of vapor onto the waste package internals is simulated as pure H{sub 2}O and enters at a rate determined by the water vapor pressure for representative temperature and relative humidity conditions. (2) Liquid-Influx Case: The water entering a waste package from the drift is simulated as typical groundwater and enters at a rate determined by the amount of seepage available to flow through openings in a breached waste package.« less

SIGKit: a New Data-based Software for Learning Introductory Geophysics

NASA Astrophysics Data System (ADS)

Zhang, Y.; Kruse, S.; George, O.; Esmaeili, S.; Papadimitrios, K. S.; Bank, C. G.; Cadmus, A.; Kenneally, N.; Patton, K.; Brusher, J.

2016-12-01

Students of diverse academic backgrounds take introductory geophysics courses to learn the theory of a variety of measurement and analysis methods with the expectation to be able to apply their basic knowledge to real data. Ideally, such data is collected in field courses and also used in lecture-based courses because they provide a critical context for better learning and understanding of geophysical methods. Each method requires a separate software package for the data processing steps, and the complexity and variety of professional software makes the path through data processing to data interpretation a strenuous learning process for students and a challenging teaching task for instructors. SIGKit (Student Investigation of Geophysics Toolkit) being developed as a collaboration between the University of South Florida, the University of Toronto, and MathWorks intends to address these shortcomings by showing the most essential processing steps and allowing students to visualize the underlying physics of the various methods. It is based on MATLAB software and offered as an easy-to-use graphical user interface and packaged so it can run as an executable in the classroom and the field even on computers without MATLAB licenses. An evaluation of the software based on student feedback from focus-group interviews and think-aloud observations helps drive its development and refinement. The toolkit provides a logical gateway into the more sophisticated and costly software students will encounter later in their training and careers by combining essential visualization, modeling, processing, and analysis steps for seismic, GPR, magnetics, gravity, resistivity, and electromagnetic data.

Simbrain 3.0: A flexible, visually-oriented neural network simulator.

PubMed

Tosi, Zachary; Yoshimi, Jeffrey

2016-11-01

Simbrain 3.0 is a software package for neural network design and analysis, which emphasizes flexibility (arbitrarily complex networks can be built using a suite of basic components) and a visually rich, intuitive interface. These features support both students and professionals. Students can study all of the major classes of neural networks in a familiar graphical setting, and can easily modify simulations, experimenting with networks and immediately seeing the results of their interventions. With the 3.0 release, Simbrain supports models on the order of thousands of neurons and a million synapses. This allows the same features that support education to support research professionals, who can now use the tool to quickly design, run, and analyze the behavior of large, highly customizable simulations. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Suicide postvention: what mental health professionals need to know].

PubMed

Becker, Katja; Manthey, Thomas; Kaess, Michael; Brockmann, Elisabeth; Zimmermann, Frank; Plener, Paul L

2017-11-01

Postvention is the term used to describe a package of interventions designed for people affected by suicide. Inpatient suicides in Departments of Child and Adolescent Psychiatry are rare, but nevertheless constitute an immense burden to family members, friends, and fellow patients, as well as to medical staff members. Besides including an effective management of the acute crisis situation with well-defined communication rules, appropriate interaction with the bereaved, and prevention of copycat suicides in other patients, reliable guidelines for dealing with inpatient suicide must also contain a precise procedure on how to handle mental stress in physicians, psychotherapists, and other staff members. Furthermore, postvention should be an important part of the professional training of physicians as well as psychotherapists who work in child and adolescent psychiatry departments or outpatient clinics.

PlasmaPy: beginning a community developed Python package for plasma physics

NASA Astrophysics Data System (ADS)

Murphy, Nicholas A.; Huang, Yi-Min; PlasmaPy Collaboration

2016-10-01

In recent years, researchers in several disciplines have collaborated on community-developed open source Python packages such as Astropy, SunPy, and SpacePy. These packages provide core functionality, common frameworks for data analysis and visualization, and educational tools. We propose that our community begins the development of PlasmaPy: a new open source core Python package for plasma physics. PlasmaPy could include commonly used functions in plasma physics, easy-to-use plasma simulation codes, Grad-Shafranov solvers, eigenmode solvers, and tools to analyze both simulations and experiments. The development will include modern programming practices such as version control, embedding documentation in the code, unit tests, and avoiding premature optimization. We will describe early code development on PlasmaPy, and discuss plans moving forward. The success of PlasmaPy depends on active community involvement and a welcoming and inclusive environment, so anyone interested in joining this collaboration should contact the authors.

Safety evaluation for packaging (onsite) concrete-lined waste packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romano, T.

1997-09-25

The Pacific Northwest National Laboratory developed a package to ship Type A, non-transuranic, fissile excepted quantities of liquid or solid radioactive material and radioactive mixed waste to the Central Waste Complex for storage on the Hanford Site.

Multimedia package for LRFD concrete bridge design.

DOT National Transportation Integrated Search

2009-02-01

This Project developed a Load and Resistance Factor Design (LRFD) multimedia package to provide a practical introduction and an in-depth understanding of the technological advances in the design of concrete bridges. This package can be used to train ...

Meteorological data-processing package

NASA Technical Reports Server (NTRS)

Billingsly, J. B.; Braken, P. A.

1979-01-01

METPAK, meteorological data-processing package of satellite data used to develop cloud-tracking maps, is given. Data can develop and enhance numerical prediction models for mesoscale phenomena and improve ability to detect and predict storms.

SnapShot: Visualization to Propel Ice Hockey Analytics.

PubMed

Pileggi, H; Stolper, C D; Boyle, J M; Stasko, J T

2012-12-01

Sports analysts live in a world of dynamic games flattened into tables of numbers, divorced from the rinks, pitches, and courts where they were generated. Currently, these professional analysts use R, Stata, SAS, and other statistical software packages for uncovering insights from game data. Quantitative sports consultants seek a competitive advantage both for their clients and for themselves as analytics becomes increasingly valued by teams, clubs, and squads. In order for the information visualization community to support the members of this blossoming industry, it must recognize where and how visualization can enhance the existing analytical workflow. In this paper, we identify three primary stages of today's sports analyst's routine where visualization can be beneficially integrated: 1) exploring a dataspace; 2) sharing hypotheses with internal colleagues; and 3) communicating findings to stakeholders.Working closely with professional ice hockey analysts, we designed and built SnapShot, a system to integrate visualization into the hockey intelligence gathering process. SnapShot employs a variety of information visualization techniques to display shot data, yet given the importance of a specific hockey statistic, shot length, we introduce a technique, the radial heat map. Through a user study, we received encouraging feedback from several professional analysts, both independent consultants and professional team personnel.

Effectiveness of CAI Package on Achievement in Physics of IX Standard Students

ERIC Educational Resources Information Center

Maheswari, I. Uma; Ramakrishnan, N.

2015-01-01

The present study is an experimental one in nature, to find out the effectiveness of CAI package on in Physics of IX std. students. For this purpose a CAI package was developed and validated. The validated CAI package formed an independent variable of this study. The dependent variable is students' achievements in physics content. In order to find…

Ohmic Heating of an Electrically Conductive Food Package.

PubMed

Kanogchaipramot, Kanyawee; Tongkhao, Kullanart; Sajjaanantakul, Tanaboon; Kamonpatana, Pitiya

2016-12-01

Ohmic heating through an electrically conductive food package is a new approach to heat the food and its package as a whole after packing to avoid post-process contamination and to serve consumer needs for convenience. This process has been successfully completed using polymer film integrated with an electrically conductive film to form a conductive package. Orange juice packed in the conductive package surrounded with a conductive medium was pasteurized in an ohmic heater. A mathematical model was developed to simulate the temperature distribution within the package and its surroundings. A 3-D thermal-electric model showed heating uniformity inside the food package while the hot zone appeared in the orange juice adjacent to the conductive film. The accuracy of the model was determined by comparing the experimental results with the simulated temperature and current drawn; the model showed good agreement between the actual and simulated results. An inoculated pack study using Escherichia coli O157:H7 indicated negative growth of viable microorganisms at the target and over target lethal process temperatures, whereas the microorganism was present in the under target temperature treatment. Consequently, our developed ohmic heating system with conductive packaging offers potential for producing safe food. © 2016 Institute of Food Technologists®.

Sensory impacts of food-packaging interactions.

PubMed

Duncan, Susan E; Webster, Janet B

2009-01-01

Sensory changes in food products result from intentional or unintentional interactions with packaging materials and from failure of materials to protect product integrity or quality. Resolving sensory issues related to plastic food packaging involves knowledge provided by sensory scientists, materials scientists, packaging manufacturers, food processors, and consumers. Effective communication among scientists and engineers from different disciplines and industries can help scientists understand package-product interactions. Very limited published literature describes sensory perceptions associated with food-package interactions. This article discusses sensory impacts, with emphasis on oxidation reactions, associated with the interaction of food and materials, including taints, scalping, changes in food quality as a function of packaging, and examples of material innovations for smart packaging that can improve sensory quality of foods and beverages. Sensory evaluation is an important tool for improved package selection and development of new materials.

Developing capacities of community health workers in sexual and reproductive, maternal, newborn, child, and adolescent health: a mapping and review of training resources.

PubMed

Tran, Nguyen Toan; Portela, Anayda; de Bernis, Luc; Beek, Kristen

2014-01-01

Given country demands for support in the training of community health workers (CHWs) to accelerate progress towards reaching the Millennium Development Goals in sexual and reproductive health and maternal, newborn, child, and adolescent health (SR/MNCAH), the United Nations Health Agencies conducted a synthesis of existing training resource packages for CHWs in different components of SR/MNCAH to identify gaps and opportunities and inform efforts to harmonize approaches to developing the capacity of CHWs. A mapping of training resource packages for CHWs was undertaken with documents retrieved online and from key informants. Materials were classified by health themes and analysed using agreed parameters. Ways forward were informed by a subsequent expert consultation. We identified 31 relevant packages. They covered different components of the SR/MNCAH continuum in varying breadth (integrated packages) and depth (focused packages), including family planning, antenatal and childbirth care (mainly postpartum haemorrhage), newborn care, and childhood care, and HIV. There is no or limited coverage of interventions related to safe abortion, adolescent health, and gender-based violence. There is no training package addressing the range of evidence-based interventions that can be delivered by CHWs as per World Health Organization guidance. Gaps include weakness in the assessment of competencies of trainees, in supportive supervision, and in impact assessment of packages. Many packages represent individual programme efforts rather than national programme materials, which could reflect weak integration into national health systems. There is a wealth of training packages on SR/MNCAH for CHWs which reflects interest in strengthening the capacity of CHWs. This offers an opportunity for governments and partners to mount a synergistic response to address the gaps and ensure an evidence-based comprehensive package of interventions to be delivered by CHWs. Packages with defined competencies and methods for assessing competencies and supervision are considered best practices but remain a gap.

Developing Capacities of Community Health Workers in Sexual and Reproductive, Maternal, Newborn, Child, and Adolescent Health: A Mapping and Review of Training Resources

PubMed Central

Tran, Nguyen Toan; Portela, Anayda; de Bernis, Luc; Beek, Kristen

2014-01-01

Background Given country demands for support in the training of community health workers (CHWs) to accelerate progress towards reaching the Millennium Development Goals in sexual and reproductive health and maternal, newborn, child, and adolescent health (SR/MNCAH), the United Nations Health Agencies conducted a synthesis of existing training resource packages for CHWs in different components of SR/MNCAH to identify gaps and opportunities and inform efforts to harmonize approaches to developing the capacity of CHWs. Methods A mapping of training resource packages for CHWs was undertaken with documents retrieved online and from key informants. Materials were classified by health themes and analysed using agreed parameters. Ways forward were informed by a subsequent expert consultation. Results We identified 31 relevant packages. They covered different components of the SR/MNCAH continuum in varying breadth (integrated packages) and depth (focused packages), including family planning, antenatal and childbirth care (mainly postpartum haemorrhage), newborn care, and childhood care, and HIV. There is no or limited coverage of interventions related to safe abortion, adolescent health, and gender-based violence. There is no training package addressing the range of evidence-based interventions that can be delivered by CHWs as per World Health Organization guidance. Gaps include weakness in the assessment of competencies of trainees, in supportive supervision, and in impact assessment of packages. Many packages represent individual programme efforts rather than national programme materials, which could reflect weak integration into national health systems. Conclusions There is a wealth of training packages on SR/MNCAH for CHWs which reflects interest in strengthening the capacity of CHWs. This offers an opportunity for governments and partners to mount a synergistic response to address the gaps and ensure an evidence-based comprehensive package of interventions to be delivered by CHWs. Packages with defined competencies and methods for assessing competencies and supervision are considered best practices but remain a gap. PMID:24736623

Meso-scale controlled motion for a microfluidic drop ejector.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galambos, Paul C.; Givler, Richard C.; Pohl, Kenneth Roy

2004-12-01

The objective of this LDRD was to develop a uniquely capable, novel droplet solution based manufacturing system built around a new MEMS drop ejector. The development all the working subsystems required was completed, leaving the integration of these subsystems into a working prototype still left to accomplish. This LDRD report will focus on the three main subsystems: (1) MEMS drop ejector--the MEMS ''sideshooter'' effectively ejected 0.25 pl drops at 10 m/s, (2) packaging--a compact ejector package based on a modified EMDIP (Electro-Microfluidic Dual In-line Package--SAND2002-1941) was fabricated, and (3) a vision/stage system allowing precise ejector package positioning in 3 dimensionsmore » above a target was developed.« less

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

Space shuttle galley water system test program

NASA Technical Reports Server (NTRS)

1975-01-01

A water system for food rehydration was tested to determine the requirements for a space shuttle gallery flight system. A new food package concept had been previously developed in which water was introduced into the sealed package by means of a needle and septum. The needle configuration was developed and the flow characteristics measured. The interface between the food package and the water system, oven, and food tray was determined.

Ultra high speed image processing techniques. [electronic packaging techniques

NASA Technical Reports Server (NTRS)

Anthony, T.; Hoeschele, D. F.; Connery, R.; Ehland, J.; Billings, J.

1981-01-01

Packaging techniques for ultra high speed image processing were developed. These techniques involve the development of a signal feedthrough technique through LSI/VLSI sapphire substrates. This allows the stacking of LSI/VLSI circuit substrates in a 3 dimensional package with greatly reduced length of interconnecting lines between the LSI/VLSI circuits. The reduced parasitic capacitances results in higher LSI/VLSI computational speeds at significantly reduced power consumption levels.

Dill: an algorithm and a symbolic software package for doing classical supersymmetry calculations

NASA Astrophysics Data System (ADS)

Luc̆ić, Vladan

1995-11-01

An algorithm is presented that formalizes different steps in a classical Supersymmetric (SUSY) calculation. Based on the algorithm Dill, a symbolic software package, that can perform the calculations, is developed in the Mathematica programming language. While the algorithm is quite general, the package is created for the 4 - D, N = 1 model. Nevertheless, with little modification, the package could be used for other SUSY models. The package has been tested and some of the results are presented.

Hermetic Packages For Millimeter-Wave Circuits

NASA Technical Reports Server (NTRS)

Herman, Martin I.; Lee, Karen A.; Lowry, Lynn E.; Carpenter, Alain; Wamhof, Paul

1994-01-01

Advanced hermetic packages developed to house electronic circuits operating at frequencies from 1 to 100 gigahertz and beyond. Signals coupled into and out of packages electromagnetically. Provides circuit packages small, lightweight, rugged, and inexpensive in mass production. Packages embedded in planar microstrip and coplanar waveguide circuits, in waveguide-to-planar and planar-to-waveguide circuitry, in waveguide-to-waveguide circuitry, between radiating (antenna) elements, and between planar transmission lines and radiating elements. Other applications in automotive, communication, radar, remote sensing, and biomedical electronic systems foreseen.

GENERAL PURPOSE ADA PACKAGES

NASA Technical Reports Server (NTRS)

Klumpp, A. R.

1994-01-01

Ten families of subprograms are bundled together for the General-Purpose Ada Packages. The families bring to Ada many features from HAL/S, PL/I, FORTRAN, and other languages. These families are: string subprograms (INDEX, TRIM, LOAD, etc.); scalar subprograms (MAX, MIN, REM, etc.); array subprograms (MAX, MIN, PROD, SUM, GET, and PUT); numerical subprograms (EXP, CUBIC, etc.); service subprograms (DATE_TIME function, etc.); Linear Algebra II; Runge-Kutta integrators; and three text I/O families of packages. In two cases, a family consists of a single non-generic package. In all other cases, a family comprises a generic package and its instances for a selected group of scalar types. All generic packages are designed to be easily instantiated for the types declared in the user facility. The linear algebra package is LINRAG2. This package includes subprograms supplementing those in NPO-17985, An Ada Linear Algebra Package Modeled After HAL/S (LINRAG). Please note that LINRAG2 cannot be compiled without LINRAG. Most packages have widespread applicability, although some are oriented for avionics applications. All are designed to facilitate writing new software in Ada. Several of the packages use conventions introduced by other programming languages. A package of string subprograms is based on HAL/S (a language designed for the avionics software in the Space Shuttle) and PL/I. Packages of scalar and array subprograms are taken from HAL/S or generalized current Ada subprograms. A package of Runge-Kutta integrators is patterned after a built-in MAC (MIT Algebraic Compiler) integrator. Those packages modeled after HAL/S make it easy to translate existing HAL/S software to Ada. The General-Purpose Ada Packages program source code is available on two 360K 5.25" MS-DOS format diskettes. The software was developed using VAX Ada v1.5 under DEC VMS v4.5. It should be portable to any validated Ada compiler and it should execute either interactively or in batch. The largest package requires 205K of main memory on a DEC VAX running VMS. The software was developed in 1989, and is a copyrighted work with all copyright vested in NASA.

REMOVAL OF LEGACY PLUTONIUM MATERIALS FROM SWEDEN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Kerry A.; Bellamy, J. Steve; Chandler, Greg T.

2013-08-18

U.S. Department of Energy’s National Nuclear Security Administration (NNSA) Office of Global Threat Reduction (GTRI) recently removed legacy plutonium materials from Sweden in collaboration with AB SVAFO, Sweden. This paper details the activities undertaken through the U.S. receiving site (Savannah River Site (SRS)) to support the characterization, stabilization, packaging and removal of legacy plutonium materials from Sweden in 2012. This effort was undertaken as part of GTRI’s Gap Materials Program and culminated with the successful removal of plutonium from Sweden as announced at the 2012 Nuclear Security Summit. The removal and shipment of plutonium materials to the United States wasmore » the first of its kind under NNSA’s Global Threat Reduction Initiative. The Environmental Assessment for the U.S. receipt of gap plutonium material was approved in May 2010. Since then, the multi-year process yielded many first time accomplishments associated with plutonium packaging and transport activities including the application of the of DOE-STD-3013 stabilization requirements to treat plutonium materials outside the U.S., the development of an acceptance criteria for receipt of plutonium from a foreign country, the development and application of a versatile process flow sheet for the packaging of legacy plutonium materials, the identification of a plutonium container configuration, the first international certificate validation of the 9975 shipping package and the first intercontinental shipment using the 9975 shipping package. This paper will detail the technical considerations in developing the packaging process flow sheet, defining the key elements of the flow sheet and its implementation, determining the criteria used in the selection of the transport package, developing the technical basis for the package certificate amendment and the reviews with multiple licensing authorities and most importantly integrating the technical activities with the Swedish partners.« less

Development of a GIFTS (Graphics-Oriented Interactive Finite-Element Time-Sharing System) Plotting Package Compatible with Either PLOT10 or IBM/DSM Graphics.

DTIC Science & Technology

1983-06-01

1D-A132 95 DEVELOPMENT OF A GIFTS (GRAPHICS ORIENTED INTERACTIVE i/i FINITE-ELEMENT TIME..(U) NAVAL POSTGRADUATE SCHOOL I MONTEREY CA T R PICKLES JUN...183 THESIS " DEVELOPMENT OF A GIFTS PLOTTING PACKAGE COMPATIBLE WITH EITHER PLOT10 OR IBM/DSM GRAPHICS by Thomas R. Pickles June 1983 Thesis Advisor: G...TYPEAFtWEPORT & PERIOD COVERED Development of GIFTS Plotting Package Bi ’s Thesis; Compatible with either PLOTl0 or June 1983 IBM/DSM Graphics 6. PERFORMING ORO

Current topics in active and intelligent food packaging for preservation of fresh foods.

PubMed

Lee, Seung Yuan; Lee, Seung Jae; Choi, Dong Soo; Hur, Sun Jin

2015-11-01

The purpose of this review is to provide an overview of current packaging systems, e.g. active packaging and intelligent packaging, for various foods. Active packaging, such as modified atmosphere packaging (MAP), extends the shelf life of fresh produce, provides a high-quality product, reduces economic losses, including those caused by delay of ripening, and improves appearance. However, in active packaging, several variables must be considered, such as temperature control and different gas formulations with different product types and microorganisms. Active packaging refers to the incorporation of additive agents into packaging materials with the purpose of maintaining or extending food product quality and shelf life. Intelligent packaging is emerging as a potential advantage in food processing and is an especially useful tool for tracking product information and monitoring product conditions. Moreover, intelligent packaging facilitates data access and information exchange by altering conditions inside or outside the packaging and product. In spite of these advantages, few of these packaging systems are commercialized because of high cost, strict safety and hygiene regulations or limited consumer acceptance. Therefore more research is needed to develop cheaper, more easily applicable and effective packaging systems for various foods. © 2015 Society of Chemical Industry.

Gender impact on the socioprofessional identification of women dentists in Bulgaria.

PubMed

Katrova, Lydia G

2004-07-01

Women comprise 73 percent of all dentists in Bulgaria. Almost all of them started their careers as salaried, and now they are self-employed. The purpose of this study was to show how female dentists in Bulgaria met the challenges of the social and health reforms during the period of transition from totalitarian to democratic rule. A field sociological survey was carried out between October 1996 and June 1997, involving a sample of 842 dentists. The questionnaire was designed to give information on dental demography trends, pattern of participation and practice of female dentists, and their career development. The data were treated statistically using an SPSS package. Results show that for the period 1991-96 women dentists owned more than 50 percent of the newly opened private practices in Bulgaria. They were more interested in improving their qualifications and more successful in obtaining specialty status than male dentists. Dentists in Bulgaria by the late 1990 s, with no gender difference, tend to identify themselves as liberal practitioners within the pluralistic model of dental services delivery. The volume of services delivered and profile of women in professional practice and their social and professional mobility are highly competitive, despite the growing problems of maternity leave coverage and funding to re-enter the profession.

Subcutaneous infusion in palliative care: a focus on the neria soft 90 infusion set.

PubMed

Gabriel, Janice

2014-11-01

Subcutaneous administration of medications and/or fluids can play a crucial part in supporting patients at home and thereby avoiding the need for hospitalisation. It is an area of patient care that has received little attention compared with other types of parenteral therapies. However, it is an effective and safe route for continuous administration for individuals requiring palliative care. Technological advancements have led to improved subcutaneous infusion devices, such as fine-gauge cannulae with integral sharps protection, as well as integral hypoallergenic dressings. These design features not only help to increase patient comfort but also minimise the potential for needlestick injuries, as well as providing the health professional with one sterile package containing all of the components needed to establish subcutaneous infusion. However, technological developments alone are insufficient to improve patient outcomes. Knowledge of the individual patient, together with their diagnosis and intended treatment, will influence the choice of subcutaneous infusion device, with the overall aim of minimising the potential for complications and improving comfort. This paper provides an overview of subcutaneous infusion, including the importance of patient assessment and the education and training needs of health professionals, and then focuses on one specific subcutaneous infusion device: the neria soft 90 infusion set.

A Qualitative Investigation to Underpin the Development of an Electronic Tool to Assess Nutrition Literacy in Australians Adults.

PubMed

Cassar, Alyssa M; Denyer, Gareth S; O'Connor, Helen T; Gifford, Janelle A

2018-02-23

Nutrition literacy is linked to health via its influence on dietary intake. There is a need for a tool to assess nutrition literacy in research and dietetic practice. We sought guidance from nutrition professionals on topic areas and features of an electronic nutrition literacy assessment tool for Australian adults. 28 experienced nutrition professionals engaged in a range of nutrition and dietetic work areas participated in six focus groups using a semi-structured interview schedule. Data were analysed using an inductive approach using NVivo 10 (QSR International, Pty Ltd., Doncaster, Australia, 2012). Key areas identified to assess nutrition literacy included specific nutrients versus foods, labels and packaging, construction of the diet, knowledge of the Australian Dietary Guidelines and Australian Guide to Healthy Eating, understanding of serve and portion sizes, ability to select healthier foods, and demographics such as belief systems and culture. Exploitation of electronic features to enhance visual and auditory displays, including interactive animations such as "drag and drop" and virtual reality situations, were discussed. This study provided insight into the most relevant topic areas and presentation format to assess the nutrition literacy of adult Australians. The visual, auditory, and interactive capacity of the available technology could enhance the assessment of nutrition literacy.

Assisting problem drinkers to change on their own: effect of specific and non-specific advice.

PubMed

Spivak, K; Sanchez-Craig, M; Davila, R

1994-09-01

Problem drinkers (99 males, 41 females) wishing to quit or cut down without professional help received a 60-minute session during which they were assessed and given at random one of these materials: Guidelines, a two-page pamphlet outlining specific methods for achieving abstinence or moderate drinking; Manual, a 30-page booklet describing the methods in the Guidelines; or General Information, a package about alcohol effects. At 12 months follow-up, subjects in the Guidelines and Manual conditions showed significantly greater reductions of heavy days (of 5+ drinks) than subjects in General Information (70% vs. 24%); in addition, significantly fewer subjects in the Guidelines and the Manual conditions expressed need for professional assistance with their drinking (25% vs. 46% in General Information). No main effect of condition or gender was observed on rates of moderate drinkers. At 12 months follow-up, 31% of the men and 43% of the women were rated as moderate drinkers. It was concluded that drinkers intending to cut down on their own derive greater benefit (in terms of their alcohol use) from materials containing specific instructions to develop moderate drinking than from those providing general information on alcohol effects. Clinical and research implications of the findings are discussed.

Myths, beliefs and perceptions about mental disorders and health-seeking behavior in Delhi, India

PubMed Central

Kishore, Jugal; Gupta, Avni; Jiloha, Ram Chander; Bantman, Patrick

2011-01-01

Objectives: To assess the myths, beliefs and perceptions about mental disorders and health-seeking behavior in general population and medical professionals of India. Materials and Methods: A cross-sectional study was carried out with a sample of 436 subjects (360 subjects from urban and rural communities of Delhi and 76 medical professionals working in different organizations in Delhi). A pre-tested questionnaire consisting items on perceptions, myths, and beliefs about causes, treatment, and health-seeking behavior for mental disorders was used. The collected data were statistically analyzed using computer software package Epi-info. Appropriate tests of significance were applied to detect any significant association. Results: The mental disorders were thought to be because of loss of semen or vaginal secretion (33.9% rural, 8.6% urban, 1.3% professionals), less sexual desire (23.7% rural, 18% urban), excessive masturbation (15.3% rural, 9.8% urban), God's punishment for their past sins (39.6% rural, 20.7% urban, 5.2% professionals), and polluted air (51.5% rural, 11.5% urban, 5.2% professionals). More people (37.7%) living in joint families than in nuclear families (26.5%) believed that sadness and unhappiness cause mental disorders. 34.8% of the rural subjects and 18% of the urban subjects believed that children do not get mental disorders, which means they have conception of adult-oriented mental disorders. 40.2% in rural areas, 33.3% in urban areas, and 7.9% professionals believed that mental illnesses are untreatable. Many believed that psychiatrists are eccentric (46.1% rural, 8.4% urban, 7.9% professionals), tend to know nothing, and do nothing (21.5% rural, 13.7% urban, 3.9% professionals), while 74.4% of rural subjects, 37.1% of urban subjects, and 17.6% professionals did not know that psychiatry is a branch of medicine. More people in rural areas than in urban area thought that keeping fasting or a faith healer can cure them from mental illnesses, whereas 11.8% of medical professionals believed the same. Most of the people reported that they liked to go to someone close who could listen to their problems, when they were sad and anxious. Only 15.6% of urban and 34.4% of the rural population reported that they would like to go to a psychiatrist when they or their family members are suffering from mental illness. Conclusion: It can be concluded from this study that the myths and misconceptions are significantly more prevalent in rural areas than in urban areas and among medical professionals, and the people need to be communicated to change their behavior and develop a positive attitude toward mental disorders so that health-seeking behavior can improve. PMID:22303041

Nurses' perceptions of involvement in Thunder Project. American Association of Critical-Care Nurses Thunder Project task force.

PubMed

1995-03-01

The American Association of Critical-Care Nurse's (AACN) Thunder Project was conceptualized and developed to provide critical-care nurses with a research protocol ready for institutional review and implementation. Project goals included providing a research package (protocol, educational, and data collection materials) and a topic of clinical significance to critical-care nurses. Site coordinators and research associates were identified at participating institutions to coordinate and implement all study activities. In this article, an evaluation study undertaken to recount perceptions of site coordinators and research associates in relation to project goals and research experience is described. Data demonstrated that study goals were achieved, and research experience was considered professionally enhancing. Written comments described barriers to project implementation at participating sites. Obtaining informed consent and physician approval and/or cooperation were identified as significant barriers to implementation at some sites.

Creating a Social Media Assessment Tool for Family Nursing.

PubMed

Risling, Tracie; Risling, Derek; Holtslander, Lorraine

2017-02-01

The use of social media (SM) is contributing to an unprecedented state of global connectivity and occupying an increasingly prominent position in the lives of individuals and families. The more integrated these media become into society the more likely they are to play a role in overall health and family functioning, be it positively or negatively. Family systems theory provides an ideal lens through which to examine the effects of SM in today's family life. This article introduces a new SM assessment tool aligned with the principles of this foundational theory. Family nurses can use the proposed Social Media Assessment Package (SMAP) to gain an initial picture of usage patterns within a family as well as identify and support positive future SM choices. Practitioners may also use the SMAP in a personal evaluation of their practice as a means to maximize SM use in ongoing professional development.

Implementing a framework for goal setting in community based stroke rehabilitation: a process evaluation

PubMed Central

2013-01-01

Background Goal setting is considered ‘best practice’ in stroke rehabilitation; however, there is no consensus regarding the key components of goal setting interventions or how they should be optimally delivered in practice. We developed a theory-based goal setting and action planning framework (G-AP) to guide goal setting practice. G-AP has 4 stages: goal negotiation, goal setting, action planning & coping planning and appraisal & feedback. All stages are recorded in a patient-held record. In this study we examined the implementation, acceptability and perceived benefits of G-AP in one community rehabilitation team with people recovering from stroke. Methods G-AP was implemented for 6 months with 23 stroke patients. In-depth interviews with 8 patients and 8 health professionals were analysed thematically to investigate views of its implementation, acceptability and perceived benefits. Case notes of interviewed patients were analysed descriptively to assess the fidelity of G-AP implementation. Results G-AP was mostly implemented according to protocol with deviations noted at the planning and appraisal and feedback stages. Each stage was felt to make a useful contribution to the overall process; however, in practice, goal negotiation and goal setting merged into one stage and the appraisal and feedback stage included an explicit decision making component. Only two issues were raised regarding G-APs acceptability: (i) health professionals were concerned about the impact of goal non-attainment on patient’s well-being (patients did not share their concerns), and (ii) some patients and health professionals found the patient-held record unhelpful. G-AP was felt to have a positive impact on patient goal attainment and professional goal setting practice. Collaborative partnerships between health professionals and patients were apparent throughout the process. Conclusions G-AP has been perceived as both beneficial and broadly acceptable in one community rehabilitation team; however, implementation of novel aspects of the framework was inconsistent. The regulatory function of goal non-attainment and the importance of creating flexible partnerships with patients have been highlighted. Further development of the G-AP framework, training package and patient held record is required to address the specific issues highlighted by this process evaluation. Further evaluation of G-AP is required across diverse community rehabilitation settings. PMID:23705824

Romanian experience on packaging testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vieru, G.

2007-07-01

With more than twenty years ago, the Institute for Nuclear Research Pitesti (INR), through its Reliability and Testing Laboratory, was licensed by the Romanian Nuclear Regulatory Body- CNCAN and to carry out qualification tests [1] for packages intended to be used for the transport and storage of radioactive materials. Radioactive materials, generated by Romanian nuclear facilities [2] are packaged in accordance with national [3] and the IAEA's Regulations [1,6] for a safe transport to the disposal center. Subjecting these packages to the normal and simulating test conditions accomplish the evaluation and certification in order to prove the package technical performances.more » The paper describes the qualification tests for type A and B packages used for transport and storage of radioactive materials, during a period of 20 years of experience. Testing is used to substantiate assumption in analytical models and to demonstrate package structural response. The Romanian test facilities [1,3,6] are used to simulate the required qualification tests and have been developed at INR Pitesti, the main supplier of type A packages used for transport and storage of low radioactive wastes in Romania. The testing programme will continue to be a strong option to support future package development, to perform a broad range of verification and certification tests on radioactive material packages or component sections, such as packages used for transport of radioactive sources to be used for industrial or medical purposes [2,8]. The paper describes and contain illustrations showing some of the various tests packages which have been performed during certain periods and how they relate to normal conditions and minor mishaps during transport. Quality assurance and quality controls measures taken in order to meet technical specification provided by the design there are also presented and commented. (authors)« less

The experiences and challenges faced by rehabilitation community service therapists within the South African Primary Healthcare health system

PubMed Central

2017-01-01

Background Twenty-two years after the promulgation of a plethora of progressive health policies since 1994, the South African public health system reflects a number of stumbling blocks regarding implementation. Rehabilitation professionals are not sufficiently equipped nor allowed the opportunity to comprehensively implement Primary Healthcare (PHC) from a bottom-up approach, thus engaging communities. Training on addressing social health determinants and their impact on ill-health and health outcomes is inadequate. The inadequate understanding of the advocacy role that rehabilitation professionals could play in addressing social health determinants remains a challenge in healthcare. Rehabilitation, a pillar of PHC, remains poorly understood in terms of its role within the health system. Aim We argue for rehabilitation as a vehicle for addressing social determinants of health with community service practitioners playing a critical role in addressing the inequities within the healthcare package. Setting The article reflects the opportunities and challenges faced by rehabilitation community service therapists in the delivery of rehabilitation services in a rural area of the Eastern Cape province of South Africa. Methods A single case study from the perspective of a researcher was used to explore the experience and reflection of the first author during her community service as an occupational therapist. Results The case study highlights some existing gaps within the delivery of rehabilitation services in the rural Eastern Cape. A community service package with a specific approach towards addressing social determinants of health for persons with disability at a community level is suggested. Conclusion Advocating for a rehabilitation service package to shift to community-based levels is critical. It is envisaged that a community-based approach will facilitate an understanding of the barriers faced by persons with disabilities as constituting disability, thus facilitating learning about the disabling consequences of the rural environment coupled with the system as experienced by persons with disabilities. PMID:29062760

A QR code identification technology in package auto-sorting system

NASA Astrophysics Data System (ADS)

di, Yi-Juan; Shi, Jian-Ping; Mao, Guo-Yong

2017-07-01

Traditional manual sorting operation is not suitable for the development of Chinese logistics. For better sorting packages, a QR code recognition technology is proposed to identify the QR code label on the packages in package auto-sorting system. The experimental results compared with other algorithms in literatures demonstrate that the proposed method is valid and its performance is superior to other algorithms.

Building CHAOS: An Operating System for Livermore Linux Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garlick, J E; Dunlap, C M

2003-02-21

The Livermore Computing (LC) Linux Integration and Development Project (the Linux Project) produces and supports the Clustered High Availability Operating System (CHAOS), a cluster operating environment based on Red Hat Linux. Each CHAOS release begins with a set of requirements and ends with a formally tested, packaged, and documented release suitable for use on LC's production Linux clusters. One characteristic of CHAOS is that component software packages come from different sources under varying degrees of project control. Some are developed by the Linux Project, some are developed by other LC projects, some are external open source projects, and some aremore » commercial software packages. A challenge to the Linux Project is to adhere to release schedules and testing disciplines in a diverse, highly decentralized development environment. Communication channels are maintained for externally developed packages in order to obtain support, influence development decisions, and coordinate/understand release schedules. The Linux Project embraces open source by releasing locally developed packages under open source license, by collaborating with open source projects where mutually beneficial, and by preferring open source over proprietary software. Project members generally use open source development tools. The Linux Project requires system administrators and developers to work together to resolve problems that arise in production. This tight coupling of production and development is a key strategy for making a product that directly addresses LC's production requirements. It is another challenge to balance support and development activities in such a way that one does not overwhelm the other.« less

A Comparison of Authoring Software for Developing Mathematics Self-Learning Software Packages.

ERIC Educational Resources Information Center

Suen, Che-yin; Pok, Yang-ming

Four years ago, the authors started to develop a self-paced mathematics learning software called NPMaths by using an authoring package called Tencore. However, NPMaths had some weak points. A development team was hence formed to develop similar software called Mathematics On Line. This time the team used another development language called…

ARM Data-Oriented Metrics and Diagnostics Package for Climate Model Evaluation Value-Added Product

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Chengzhu; Xie, Shaocheng

A Python-based metrics and diagnostics package is currently being developed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Infrastructure Team at Lawrence Livermore National Laboratory (LLNL) to facilitate the use of long-term, high-frequency measurements from the ARM Facility in evaluating the regional climate simulation of clouds, radiation, and precipitation. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The Coupled Model Intercomparison Project (CMIP) model data sets are also included in the package to enable model intercomparison as demonstratedmore » in Zhang et al. (2017). The mean of the CMIP model can serve as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, and radiative fluxes, with plan to extend to more fields, such as aerosol and microphysics properties. Process-oriented diagnostics focusing on individual cloud- and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. The version 1.0 package is designed based on data collected at ARM’s Southern Great Plains (SGP) Research Facility, with the plan to extend to other ARM sites. The metrics and diagnostics package is currently built upon standard Python libraries and additional Python packages developed by DOE (such as CDMS and CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first present the input data, which constitutes the core content of the metrics and diagnostics package in section 2, and a user's guide documenting the workflow/structure of the version 1.0 codes, and including step-by-step instruction for running the package in section 3.« less

Performance assessment of small-package-class nonintrusive inspection systems

NASA Astrophysics Data System (ADS)

Spradling, Michael L.; Hyatt, Roger

1997-02-01

The DoD Counterdrug Technology Development Program has addressed the development and demonstration of technology to enhance nonintrusive inspection of small packages such as passenger baggage, commercially delivered parcels, and breakbulk cargo items. Within the past year they have supported several small package-class nonintrusive inspection system performance assessment activities. All performance assessment programs involved the use of a red/blue team concept and were conducted in accordance with approved assessment protocols. This paper presents a discussion related to the systematic performance assessment of small package-class nonintrusive inspection technologies, including transmission, backscatter and computed tomography x-ray imaging, and protocol-related considerations for the assessment of these systems.

Development of a software package for solid-angle calculations using the Monte Carlo method

NASA Astrophysics Data System (ADS)

Zhang, Jie; Chen, Xiulian; Zhang, Changsheng; Li, Gang; Xu, Jiayun; Sun, Guangai

2014-02-01

Solid-angle calculations play an important role in the absolute calibration of radioactivity measurement systems and in the determination of the activity of radioactive sources, which are often complicated. In the present paper, a software package is developed to provide a convenient tool for solid-angle calculations in nuclear physics. The proposed software calculates solid angles using the Monte Carlo method, in which a new type of variance reduction technique was integrated. The package, developed under the environment of Microsoft Foundation Classes (MFC) in Microsoft Visual C++, has a graphical user interface, in which, the visualization function is integrated in conjunction with OpenGL. One advantage of the proposed software package is that it can calculate the solid angle subtended by a detector with different geometric shapes (e.g., cylinder, square prism, regular triangular prism or regular hexagonal prism) to a point, circular or cylindrical source without any difficulty. The results obtained from the proposed software package were compared with those obtained from previous studies and calculated using Geant4. It shows that the proposed software package can produce accurate solid-angle values with a greater computation speed than Geant4.

Development of high performance scientific components for interoperability of computing packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gulabani, Teena Pratap

2008-01-01

Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achievedmore » by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.« less

PLATSIM: A Simulation and Analysis Package for Large-Order Flexible Systems. Version 2.0

NASA Technical Reports Server (NTRS)

Maghami, Peiman G.; Kenny, Sean P.; Giesy, Daniel P.

1997-01-01

The software package PLATSIM provides efficient time and frequency domain analysis of large-order generic space platforms. PLATSIM can perform open-loop analysis or closed-loop analysis with linear or nonlinear control system models. PLATSIM exploits the particular form of sparsity of the plant matrices for very efficient linear and nonlinear time domain analysis, as well as frequency domain analysis. A new, original algorithm for the efficient computation of open-loop and closed-loop frequency response functions for large-order systems has been developed and is implemented within the package. Furthermore, a novel and efficient jitter analysis routine which determines jitter and stability values from time simulations in a very efficient manner has been developed and is incorporated in the PLATSIM package. In the time domain analysis, PLATSIM simulates the response of the space platform to disturbances and calculates the jitter and stability values from the response time histories. In the frequency domain analysis, PLATSIM calculates frequency response function matrices and provides the corresponding Bode plots. The PLATSIM software package is written in MATLAB script language. A graphical user interface is developed in the package to provide convenient access to its various features.

Engaging Parents in Preventive Interventions for Young Children: Working with Cultural Diversity Within Low-Income, Urban Neighborhoods.

PubMed

Dawson-McClure, Spring; Calzada, Esther J; Brotman, Laurie M

2017-08-01

A robust literature documents the impact of poverty on child development and lifelong health, well-being and productivity. Racial and ethnic minority children continue to bear the burden of poverty disproportionately. Evidence-based parenting interventions in early childhood have the potential to attenuate risk attributable to poverty and stress. To reduce racial, ethnic, and socioeconomic disparities in the USA, parenting interventions must be accessible, engaging, and effective for low-income families of color living in large urban centers. This paper describes the initial development of ParentCorps and ongoing improvements to realize that vision. Initial development focused on creating a parenting intervention that places culture at the center and effectively embedding it in schools. ParentCorps includes core components found in nearly all effective parenting interventions with a culturally informed approach to engaging families and supporting behavior change. As the intervention is implemented at scale in increasingly diverse communities, improvement efforts include augmenting professional development to increase racial consciousness among all staff (evaluators, coaches, and school-based facilitators) and applying an implementation science framework to study and more fully support schools' use of a package of engagement strategies.

AIN-Based Packaging for SiC High-Temperature Electronics

NASA Technical Reports Server (NTRS)

Savrun, Ender

2004-01-01

Packaging made primarily of aluminum nitride has been developed to enclose silicon carbide-based integrated circuits (ICs), including circuits containing SiC-based power diodes, that are capable of operation under conditions more severe than can be withstood by silicon-based integrated circuits. A major objective of this development was to enable packaged SiC electronic circuits to operate continuously at temperatures up to 500 C. AlN-packaged SiC electronic circuits have commercial potential for incorporation into high-power electronic equipment and into sensors that must withstand high temperatures and/or high pressures in diverse applications that include exploration in outer space, well logging, and monitoring of nuclear power systems. This packaging embodies concepts drawn from flip-chip packaging of silicon-based integrated circuits. One or more SiC-based circuit chips are mounted on an aluminum nitride package substrate or sandwiched between two such substrates. Intimate electrical connections between metal conductors on the chip(s) and the metal conductors on external circuits are made by direct bonding to interconnections on the package substrate(s) and/or by use of holes through the package substrate(s). This approach eliminates the need for wire bonds, which have been the most vulnerable links in conventional electronic circuitry in hostile environments. Moreover, the elimination of wire bonds makes it possible to pack chips more densely than was previously possible.

Guidelines on What Constitutes Plagiarism and Electronic Tools to Detect it.

PubMed

Luksanapruksa, Panya; Millhouse, Paul W

2016-04-01

Plagiarism is a serious ethical problem among scientific publications. There are various definitions of plagiarism, and the major categories include unintentional (unsuitable paraphrasing or improper citations) and intentional. Intentional plagiarism includes mosaic plagiarism, plagiarism of ideas, plagiarism of text, and self-plagiarism. There are many Web sites and software packages that claim to detect plagiarism effectively. A violation of plagiarism laws can lead to serious consequences including author banning, loss of professional reputation, termination of a position, and even legal action.

Developing a Virtual Physics World

ERIC Educational Resources Information Center

Wegener, Margaret; McIntyre, Timothy J.; McGrath, Dominic; Savage, Craig M.; Williamson, Michael

2012-01-01

In this article, the successful implementation of a development cycle for a physics teaching package based on game-like virtual reality software is reported. The cycle involved several iterations of evaluating students' use of the package followed by instructional and software development. The evaluation used a variety of techniques, including…

ATTIRE (analytical tools for thermal infrared engineering): A sensor simulation and modeling package

NASA Astrophysics Data System (ADS)

Jaggi, S.

1993-02-01

The Advanced Sensor Development Laboratory (ASDL) at the Stennis Space Center develops, maintains and calibrates remote sensing instruments for the National Aeronautics & Space Administration (NASA). To perform system design trade-offs, analysis, and establish system parameters, ASDL has developed a software package for analytical simulation of sensor systems. This package called 'Analytical Tools for Thermal InfraRed Engineering' - ATTIRE, simulates the various components of a sensor system. The software allows each subsystem of the sensor to be analyzed independently for its performance. These performance parameters are then integrated to obtain system level information such as Signal-to-Noise Ratio (SNR), Noise Equivalent Radiance (NER), Noise Equivalent Temperature Difference (NETD) etc. This paper describes the uses of the package and the physics that were used to derive the performance parameters.

Understanding surgery: multimedia comes to theatre.

PubMed

Dakin, S; Garner, M; Plura, M

1997-01-01

Educational technology is well established within Schools of Nursing, however there are few computer based learning packages within the clinical environment. It was felt within the Operating Services Directorate, Royal Hallamshire Hospital, that the development of a multimedia package would enhance and complement existing teaching methods. This paper describes the theory behind the choice of a multimedia presentation and its development within the operating theatres. The package, concentrating on general surgery, has been developed by two experienced theatre nurses and a graphic designer. This has resulted in a structured but flexible, fun package which is relevant to all learners within the operating theatre environment and allied healthcare fields. The feedback obtained from users within the clinical area has reinforced the project team's original feeling that multimedia is a highly appropriate resource for clinical education.

A parent advice package for family shopping trips: development and evaluation1

PubMed Central

Clark, Hewitt B.; Greene, Brandon F.; Macrae, John W.; McNees, M. Patrick; Davis, Jerry L.; Risley, Todd R.

1977-01-01

This article reports on the primary steps in the development of parent advice for popular dissemination: (a) developing advice for one specific problem situation, family shopping trips; (b) testing the advice program for benefit to children and convenience to adults; and (c) packaging the advice so it can be used successfully by interested parents. Systematic observation of 12 families using the written advice package on shopping trips revealed its effectiveness in reducing child disruptions and increasing positive interactions between parents and children. These findings, along with interview information from families, showed that the package is usable, effective, and popular with both parents and children, and thus is ready for dissemination to a wide audience of parents—a step that in itself should involve research and evaluation. PMID:16795570

Development of a Nevada Statewide Database for Safety Analyst Software

DOT National Transportation Integrated Search

2017-02-02

Safety Analyst is a software package developed by the Federal Highway Administration (FHWA) and twenty-seven participating state and local agencies including the Nevada Department of Transportation (NDOT). The software package implemented many of the...

Introduction to Software Packages. [Final Report.

ERIC Educational Resources Information Center

Frankel, Sheila, Ed.; And Others

This document provides an introduction to applications computer software packages that support functional managers in government and encourages the use of such packages as an alternative to in-house development. A review of current application areas includes budget/project management, financial management/accounting, payroll, personnel,…

Design and Development of a CPCI-Based Electronics Package for Space Station Experiments

NASA Technical Reports Server (NTRS)

Kolacz, John S.; Clapper, Randy S.; Wade, Raymond P.

2006-01-01

The NASA John H. Glenn Research Center is developing a Compact-PCI (CPCI) based electronics package for controlling space experiment hardware on the International Space Station. Goals of this effort include an easily modified, modular design that allows for changes in experiment requirements. Unique aspects of the experiment package include a flexible circuit used for internal interconnections and a separate enclosure (box in a box) for controlling 1 kW of power for experiment fuel heating requirements. This electronics package was developed as part of the FEANICS (Flow Enclosure Accommodating Novel Investigations in Combustion of Solids) mini-facility which is part of the Fluids and Combustion Facility s Combustion Integrated Rack (CIR). The CIR will be the platform for future microgravity combustion experiments and will reside on the Destiny Module of the International Space Station (ISS). The FEANICS mini-facility will be the primary means for conducting solid fuel combustion experiments in the CIR on ISS. The main focus of many of these solid combustion experiments will be to conduct applied scientific investigations in fire-safety to support NASA s future space missions. A description of the electronics package and the results of functional testing are the subjects of this report. The report concludes that the use of innovative packaging methods combined with readily available COTS hardware can provide a modular electronics package which is easily modified for changing experiment requirements.

NASA Electronic Parts and Packaging Program

NASA Technical Reports Server (NTRS)

Kayali, Sammy

2000-01-01

NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

Advanced Space Suit Portable Life Support Subsystem Packaging Design

NASA Technical Reports Server (NTRS)

Howe, Robert; Diep, Chuong; Barnett, Bob; Thomas, Gretchen; Rouen, Michael; Kobus, Jack

2006-01-01

This paper discusses the Portable Life Support Subsystem (PLSS) packaging design work done by the NASA and Hamilton Sundstrand in support of the 3 future space missions; Lunar, Mars and zero-g. The goal is to seek ways to reduce the weight of PLSS packaging, and at the same time, develop a packaging scheme that would make PLSS technology changes less costly than the current packaging methods. This study builds on the results of NASA s in-house 1998 study, which resulted in the "Flex PLSS" concept. For this study the present EMU schematic (low earth orbit) was used so that the work team could concentrate on the packaging. The Flex PLSS packaging is required to: protect, connect, and hold the PLSS and its components together internally and externally while providing access to PLSS components internally for maintenance and for technology change without extensive redesign impact. The goal of this study was two fold: 1. Bring the advanced space suit integrated Flex PLSS concept from its current state of development to a preliminary design level and build a proof of concept mockup of the proposed design, and; 2. "Design" a Design Process, which accommodates both the initial Flex PLSS design and the package modifications, required to accommodate new technology.

Natural additives and agricultural wastes in biopolymer formulations for food packaging.

PubMed

Valdés, Arantzazu; Mellinas, Ana Cristina; Ramos, Marina; Garrigós, María Carmen; Jiménez, Alfonso

2014-01-01

The main directions in food packaging research are targeted toward improvements in food quality and food safety. For this purpose, food packaging providing longer product shelf-life, as well as the monitoring of safety and quality based upon international standards, is desirable. New active packaging strategies represent a key area of development in new multifunctional materials where the use of natural additives and/or agricultural wastes is getting increasing interest. The development of new materials, and particularly innovative biopolymer formulations, can help to address these requirements and also with other packaging functions such as: food protection and preservation, marketing and smart communication to consumers. The use of biocomposites for active food packaging is one of the most studied approaches in the last years on materials in contact with food. Applications of these innovative biocomposites could help to provide new food packaging materials with improved mechanical, barrier, antioxidant, and antimicrobial properties. From the food industry standpoint, concerns such as the safety and risk associated with these new additives, migration properties and possible human ingestion and regulations need to be considered. The latest innovations in the use of these innovative formulations to obtain biocomposites are reported in this review. Legislative issues related to the use of natural additives and agricultural wastes in food packaging systems are also discussed.

Development of active, nanoparticle, antimicrobial technologies for muscle-based packaging applications.

PubMed

Morris, Michael A; Padmanabhan, Sibu C; Cruz-Romero, Malco C; Cummins, Enda; Kerry, Joseph P

2017-10-01

Fresh and processed muscle-based foods are highly perishable food products and packaging plays a crucial role in providing containment so that the full effect of preservation can be achieved through the provision of shelf-life extension. Conventional packaging materials and systems have served the industry well, however, greater demands are being placed upon industrial packaging formats owing to the movement of muscle-based products to increasingly distant markets, as well as increased customer demands for longer product shelf-life and storage capability. Consequently, conventional packaging materials and systems will have to evolve to meet these challenges. This review presents some of the new strategies that have been developed by employing novel nanotechnological concepts which have demonstrated some promise in significantly extending the shelf-life of muscle-based foods by providing commercially-applicable, antimicrobially-active, smart packaging solutions. The primary focus of this paper is applied to subject aspects, such as; material chemistries employed, forming methods utilised, interactions of the packaging functionalities including nanomaterials employed with polymer substrates and how such materials ultimately affect microbes. In order that such materials become industrially feasible, it is important that safe, stable and commercially-viable packaging materials are shown to be producible and effective in order to gain public acceptance, legislative approval and industrial adoption. Copyright © 2017. Published by Elsevier Ltd.

Natural additives and agricultural wastes in biopolymer formulations for food packaging

NASA Astrophysics Data System (ADS)

Valdés, Arantzazu; Mellinas, Ana Cristina; Ramos, Marina; Garrigós, María Carmen; Jiménez, Alfonso

2014-02-01

The main directions in food packaging research are targeted towards improvements in food quality and food safety. For this purpose, food packaging providing longer product shelf-life, as well as the monitoring of safety and quality based upon international standards, is desirable. New active packaging strategies represent a key area of development in new multifunctional materials where the use of natural additives and/or agricultural wastes is getting increasing interest. The development of new materials, and particularly innovative biopolymer formulations, can help to address these requirements and also with other packaging functions such as: food protection and preservation, marketing and smart communication to consumers. The use of biocomposites for active food packaging is one of the most studied approaches in the last years on materials in contact with food. Applications of these innovative biocomposites could help to provide new food packaging materials with improved mechanical, barrier, antioxidant and antimicrobial properties. From the food industry standpoint, concerns such as the safety and risk associated with these new additives, migration properties and possible human ingestion and regulations need to be considered. The latest innovations in the use of these innovative formulations to obtain biocomposites are reported in this review. Legislative issues related to the use of natural additives and agricultural wastes in food packaging systems are also discussed.

Natural additives and agricultural wastes in biopolymer formulations for food packaging

PubMed Central

Valdés, Arantzazu; Mellinas, Ana Cristina; Ramos, Marina; Garrigós, María Carmen; Jiménez, Alfonso

2014-01-01

The main directions in food packaging research are targeted toward improvements in food quality and food safety. For this purpose, food packaging providing longer product shelf-life, as well as the monitoring of safety and quality based upon international standards, is desirable. New active packaging strategies represent a key area of development in new multifunctional materials where the use of natural additives and/or agricultural wastes is getting increasing interest. The development of new materials, and particularly innovative biopolymer formulations, can help to address these requirements and also with other packaging functions such as: food protection and preservation, marketing and smart communication to consumers. The use of biocomposites for active food packaging is one of the most studied approaches in the last years on materials in contact with food. Applications of these innovative biocomposites could help to provide new food packaging materials with improved mechanical, barrier, antioxidant, and antimicrobial properties. From the food industry standpoint, concerns such as the safety and risk associated with these new additives, migration properties and possible human ingestion and regulations need to be considered. The latest innovations in the use of these innovative formulations to obtain biocomposites are reported in this review. Legislative issues related to the use of natural additives and agricultural wastes in food packaging systems are also discussed. PMID:24790975

Development of the physics driver in NOAA Environmental Modeling System (NEMS)

NASA Astrophysics Data System (ADS)

Lei, H.; Iredell, M.; Tripp, P.

2016-12-01

As a key component of the Next Generation Global Prediction System (NGGPS), a physics driver is developed in the NOAA Environmental Modeling System (NEMS) in order to facilitate the research, development, and transition to operations of innovations in atmospheric physical parameterizations. The physics driver connects the atmospheric dynamic core, the Common Community Physics Package and the other NEMS-based forecast components (land, ocean, sea ice, wave, and space weather). In current global forecasting system, the physics driver has incorporated major existing physics packages including radiation, surface physics, cloud and microphysics, ozone, and stochastic physics. The physics driver is also applicable to external physics packages. The structure adjustment in NEMS by separating the PHYS trunk is to create an open physics package pool. This open platform is beneficial to the enhancement of U.S. weather forecast ability. In addition, with the universal physics driver, the NEMS can also be used for specific functions by connecting external target physics packages through physics driver. The test of its function is to connect a physics dust-radiation model in the system. Then the modified system can be used for dust storm prediction and forecast. The physics driver is also developed into a standalone form. This is to facilitate the development works on physics packages. The developers can save instant fields of meteorology data and snapshots from the running system , and then used them as offline driving data fields to test the new individual physics modules or small modifications to current modules. This prevents the run of whole system for every test.

Evaluating the effectiveness of a strategy for teaching neonatal resuscitation in West Africa.

PubMed

Enweronu-Laryea, Christabel; Engmann, Cyril; Osafo, Alexandra; Bose, Carl

2009-11-01

To evaluate the effectiveness of a strategy for teaching neonatal resuscitation on the cognitive knowledge of health professionals who attend deliveries in Ghana, West Africa. Train-the-trainer model was used to train health professionals at 2-3 day workshops from 2003 to 2007. Obstetric Anticipatory Care and Basic Neonatal Care modules were taught as part of Neonatal Resuscitation Training package. American Neonatal Resuscitation Program was adapted to the clinical role of participants and local resources. Cognitive knowledge was evaluated by written pre- and post-training tests. The median pre-training and post-training scores were 38% and 71% for midwives, 43% and 81% for nurses, 52% and 90% for nurse anaesthetists, and 62% and 98% for physicians. All groups of the 271 professionals (18 nurse anaesthetists, 55 nurses, 68 physicians, and 130 midwives) who completed the course showed significant improvement (p<0.001) in median post-training test scores. Midwives at primary health care facilities were less likely to achieve passing post-test scores than midwives at secondary and tertiary facilities [35/53 vs. 24/26 vs. 45/51 (p=0.004)] respectively. Evidence-based neonatal resuscitation training adapted to local resources significantly improved cognitive knowledge of all groups of health professionals. Further modification of training for midwives working at primary level health facilities and incorporation of neonatal resuscitation in continuing education and professional training programs are recommended.

Rotational Molding Process Technician. Instructional Program Package.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

This curriculum package contains materials developed through a partnership of the Association of Rotational Molders, El Paso Community College (Texas), and the College of DuPage (Illinois). The materials, which were developed during a 2-day DACUM (Developing a Curriculum) process, are based on national skill standards and designed for…

Mass Transfer Study of Chlorine Dioxide Gas Through Polymeric Packaging Materials

USDA-ARS?s Scientific Manuscript database

A continuous system for measuring the mass transfer of gaseous chlorine dioxide (ClO2), a strong oxidizing agent and used in food and pharmaceutical packaging, through 10 different types of polymeric packaging material was developed utilizing electrochemical sensor as a detector. Permeability, diff...

NMRbox: A Resource for Biomolecular NMR Computation.

PubMed

Maciejewski, Mark W; Schuyler, Adam D; Gryk, Michael R; Moraru, Ion I; Romero, Pedro R; Ulrich, Eldon L; Eghbalnia, Hamid R; Livny, Miron; Delaglio, Frank; Hoch, Jeffrey C

2017-04-25

Advances in computation have been enabling many recent advances in biomolecular applications of NMR. Due to the wide diversity of applications of NMR, the number and variety of software packages for processing and analyzing NMR data is quite large, with labs relying on dozens, if not hundreds of software packages. Discovery, acquisition, installation, and maintenance of all these packages is a burdensome task. Because the majority of software packages originate in academic labs, persistence of the software is compromised when developers graduate, funding ceases, or investigators turn to other projects. To simplify access to and use of biomolecular NMR software, foster persistence, and enhance reproducibility of computational workflows, we have developed NMRbox, a shared resource for NMR software and computation. NMRbox employs virtualization to provide a comprehensive software environment preconfigured with hundreds of software packages, available as a downloadable virtual machine or as a Platform-as-a-Service supported by a dedicated compute cloud. Ongoing development includes a metadata harvester to regularize, annotate, and preserve workflows and facilitate and enhance data depositions to BioMagResBank, and tools for Bayesian inference to enhance the robustness and extensibility of computational analyses. In addition to facilitating use and preservation of the rich and dynamic software environment for biomolecular NMR, NMRbox fosters the development and deployment of a new class of metasoftware packages. NMRbox is freely available to not-for-profit users. Copyright © 2017 Biophysical Society. All rights reserved.

A PC-Based Free Text DSS for Health Care

NASA Technical Reports Server (NTRS)

Grams, Ralph R.; Buchanan, Paul; Massey, James K.; Jin, Ming

1987-01-01

A free Decision Support System(DST) has been constructed for health care professional that allows the analysis of complex medical cases and the creation of diagnostic list of potential diseases for clinical evaluation.The system uses a PC-based text management system specifically designed for desktop operation. The texts employed in the decision support package include the Merck Manual (published by Merck Sharpe & Dohme) and Control of Communicable Diseas in Man (published by the American Public Health Association). The background and design of the database are discussed along with a structured analysis procedure for handling free text DSS system. A case study is presented to show the application of this technology and conclusions are drawn in the summary that point to expanded areas of professional intention and new frontiers yet to be explored in this rapidly progressing field.

The Relationship of Motor Coordination, Visual Perception, and Executive Function to the Development of 4–6-Year-Old Chinese Preschoolers' Visual Motor Integration Skills

PubMed Central

Fang, Ying; Zhang, Ying

2017-01-01

Visual motor integration (VMI) is a vital ability in childhood development, which is associated with the performance of many functional skills. By using the Beery Developmental Test Package and Executive Function Tasks, the present study explored the VMI development and its factors (visual perception, motor coordination, and executive function) among 151 Chinese preschoolers from 4 to 6 years. Results indicated that the VMI skills of children increased quickly at 4 years and peaked at 5 years and decreased at around 5 to 6 years. Motor coordination and cognitive flexibility were related to the VMI development of children from 4 to 6 years. Visual perception was associated with the VMI development at early 4 years and inhibitory control was also associated with it among 4-year-old and the beginning of 5-year-old children. Working memory had no impact on the VMI. In conclusion, the development of VMI skills among children in preschool was not stable but changed dynamically in this study. Meanwhile the factors of the VMI worked in different age range for preschoolers. These findings may give some guidance to researchers or health professionals on improving children's VMI skills in their early childhood. PMID:29457030

Merging parallel optics packaging and surface mount technologies

NASA Astrophysics Data System (ADS)

Kopp, Christophe; Volpert, Marion; Routin, Julien; Bernabé, Stéphane; Rossat, Cyrille; Tournaire, Myriam; Hamelin, Régis

2008-02-01

Optical links are well known to present significant advantages over electrical links for very high-speed data rate at 10Gpbs and above per channel. However, the transition towards optical interconnects solutions for short and very short reach applications requires the development of innovative packaging solutions that would deal with very high volume production capability and very low cost per unit. Moreover, the optoelectronic transceiver components must be able to move from the edge to anywhere on the printed circuit board, for instance close to integrated circuits with high speed IO. In this paper, we present an original packaging design to manufacture parallel optic transceivers that are surface mount devices. The package combines highly integrated Multi-Chip-Module on glass and usual IC ceramics packaging. The use of ceramic and the development of sealing technologies achieve hermetic requirements. Moreover, thanks to a chip scale package approach the final device exhibits a much minimized footprint. One of the main advantages of the package is its flexibility to be soldered or plugged anywhere on the printed circuit board as any other electronic device. As a demonstrator we present a 2 by 4 10Gbps transceiver operating at 850nm.

The results of pre-design studies on the development of a new design of gas turbine compressor package of GPA-C-16 type

NASA Astrophysics Data System (ADS)

Smirnov, A. V.; Chobenko, V. M.; Shcherbakov, O. M.; Ushakov, S. M.; Parafiynyk, V. P.; Sereda, R. M.

2017-08-01

The article summarizes the results of analysis of data concerning the operation of turbocompressor packages at compressor stations for the natural gas transmission system of Ukraine. The basic requirements for gas turbine compressor packages used for modernization and reconstruction of compressor stations are considered. Using a 16 MW gas turbine package GPA-C-16S/76-1,44M1 as an example, the results of pre-design studies and some technical solutions that improve the energy efficiency of gas turbine compressor packages and their reliability, as well as its environmental performance are given. In particular, the article deals with the matching of performance characteristics of a centrifugal compressor (hereinafter compressor) and gas turbine drive to reduce fuel gas consumption; as well as application of energy efficient technologies, in particular, exhaust gas heat recovery units and gas-oil heat exchangers in turbocompressor packages oil system; as well as reducing emissions of carbon monoxide into the atmosphere using a catalytic exhaust system. Described technical solutions can be used for development of other types of gas turbine compressor packages.

Nutrition. Learning Activity Package.

ERIC Educational Resources Information Center

Lee, Carolyn

This learning activity package on nutrition is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

Shock & Anaphylactic Shock. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on shock and anaphylactic shock is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

75 FR 59086 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Adoption of Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... package printing entitled ``Control Techniques Guidelines for Flexible Package Printing'' (Publication No... adoption of the EPA CTG for flexible packaging printing. EPA develops CTGs as guidance on control... Promulgation of Air Quality Implementation Plans; Maryland; Adoption of Control Techniques Guidelines for...

Plodia interpunctella and Trogoderma variabile larval penetration and invasion of methoprene-treated foil packaging

USDA-ARS?s Scientific Manuscript database

Packaged food products inside retail stores and food warehouses are susceptible to infestation by stored-product insects. The insect growth regulator methoprene can be impregnated onto packaging to help limit stored-product insect population development and prevent infestations. The objectives of t...

Oral Hygiene. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on oral hygiene is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics…

40 CFR 300.425 - Establishing remedial priorities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... may submit HRS scoring packages to EPA anytime throughout the year. (2) EPA shall review lead agencies' HRS scoring packages and revise them as appropriate. EPA shall develop any additional HRS scoring packages on releases known to EPA. (3) EPA shall compile the NPL based on the methods identified in...

40 CFR 300.425 - Establishing remedial priorities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... may submit HRS scoring packages to EPA anytime throughout the year. (2) EPA shall review lead agencies' HRS scoring packages and revise them as appropriate. EPA shall develop any additional HRS scoring packages on releases known to EPA. (3) EPA shall compile the NPL based on the methods identified in...

40 CFR 300.425 - Establishing remedial priorities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... may submit HRS scoring packages to EPA anytime throughout the year. (2) EPA shall review lead agencies' HRS scoring packages and revise them as appropriate. EPA shall develop any additional HRS scoring packages on releases known to EPA. (3) EPA shall compile the NPL based on the methods identified in...

40 CFR 300.425 - Establishing remedial priorities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... may submit HRS scoring packages to EPA anytime throughout the year. (2) EPA shall review lead agencies' HRS scoring packages and revise them as appropriate. EPA shall develop any additional HRS scoring packages on releases known to EPA. (3) EPA shall compile the NPL based on the methods identified in...

40 CFR 300.425 - Establishing remedial priorities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... may submit HRS scoring packages to EPA anytime throughout the year. (2) EPA shall review lead agencies' HRS scoring packages and revise them as appropriate. EPA shall develop any additional HRS scoring packages on releases known to EPA. (3) EPA shall compile the NPL based on the methods identified in...

Grooming. Learning Activity Package.

ERIC Educational Resources Information Center

Stark, Pamela

This learning activity package on grooming for health workers is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

Transit safety retrofit package development : final report.

DOT National Transportation Integrated Search

2014-07-01

This report provides a summary of the Transit Safety Retrofit Package (TRP) Development project and its results. The report documents results of each project phase, and provides recommended next steps as well as a vision for a next generation TRP. Th...

METLIN-PC: An applications-program package for problems of mathematical programming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pshenichnyi, B.N.; Sobolenko, L.A.; Sosnovskii, A.A.

1994-05-01

The METLIN-PC applications-program package (APP) was developed at the V.M. Glushkov Institute of Cybernetics of the Academy of Sciences of Ukraine on IBM PC XT and AT computers. The present version of the package was written in Turbo Pascal and Fortran-77. The METLIN-PC is chiefly designed for the solution of smooth problems of mathematical programming and is a further development of the METLIN prototype, which was created earlier on a BESM-6 computer. The principal property of the previous package is retained - the applications modules employ a single approach based on the linearization method of B.N. Pschenichnyi. Hence the namemore » {open_quotes}METLIN.{close_quotes}« less

Overview of NASA Langley's Piezoelectric Ceramic Packaging Technology and Applications

NASA Technical Reports Server (NTRS)

Bryant, Robert G.

2007-01-01

Over the past decade, NASA Langley Research Center (LaRC) has developed several actuator packaging concepts designed to enhance the performance of commercial electroactive ceramics. NASA LaRC focused on properly designed actuator and sensor packaging for the following reasons, increased durability, protect the working material from the environment, allow for proper mechanical and electrical contact, afford "ready to use" mechanisms that are scalable, and develop fabrication methodology applicable to any active material of the same physical class. It is more cost effective to enhance or tailor the performance of existing systems, through innovative packaging, than to develop, test and manufacture new materials. This approach led to the development of several solid state actuators that include THUNDER, the Macrofiber Composite or (MFC) and the Radial Field Diaphragm or (RFD). All these actuators are fabricated using standard materials and processes derived from earlier concepts. NASA s fabrication and packaging technology as yielded, piezoelectric actuators and sensors that are easy to implement, reliable, consistent in properties, and of lower cost to manufacture in quantity, than their predecessors (as evidenced by their continued commercial availability.) These piezoelectric actuators have helped foster new research and development in areas involving computational modeling, actuator specific refinements, and engineering system redesign which led to new applications for piezo-based devices that replace traditional systems currently in use.

TYPE A FISSILE PACKAGING FOR AIR TRANSPORT PROJECT OVERVIEW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberl, K.; Blanton, P.

2013-10-11

This paper presents the project status of the Model 9980, a new Type A fissile packaging for use in air transport. The Savannah River National Laboratory (SRNL) developed this new packaging to be a light weight (<150-lb), drum-style package and prepared a Safety Analysis for Packaging (SARP) for submission to the DOE/EM. The package design incorporates unique features and engineered materials specifically designed to minimize packaging weight and to be in compliance with 10CFR71 requirements. Prototypes were fabricated and tested to evaluate the design when subjected to Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC). An overview ofmore » the design details, results of the regulatory testing, and lessons learned from the prototype fabrication for the 9980 will be presented.« less

Assessment of the implementation of the primary health care package at selected sites in South Africa.

PubMed

Heunis, J C; van Rensburg, H C J; Claassens, D L

2006-11-01

A major objective of public health policy in South Africa is to develop a district-based health service focused on the delivery of primary health care. The primary health care package has been developed to promote the delivery of a number of services at the primary level. This paper assesses the implementation of the package in eight historically disadvantaged urban renewal nodes singled out for accelerated development through the government's urban renewal strategy. Data were gathered by way of interviews with primary health care facility managers and programme co-ordinators and through physical observations at facilities. The findings show that while some facilities were able to offer clients most of the services specified by the package, many others were unable do so. The urban renewal nodes differed noticeably in this respect.

Edible packaging materials.

PubMed

Janjarasskul, Theeranun; Krochta, John M

2010-01-01

Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

Control Systems

NASA Technical Reports Server (NTRS)

1984-01-01

Boeing Commercial Airplane Company's Flight Control Department engineers relied on Langley developed software package known as ORACLS to develop an advanced control synthesis package for both continuous and discrete control system. Package was used by Boeing for computerized analysis of new system designs. Resulting applications include a multiple input/output control system for the terrain-following navigation equipment of the Air Forces B-1 Bomber, and another for controlling in flight changes of wing camber on an experimental airplane. ORACLS is one of 1,300 computer programs available from COSMIC.

Natural biopolymer-based nanocomposite films for packaging applications.

PubMed

Rhim, Jong-Whan; Ng, Perry K W

2007-01-01

Concerns on environmental waste problems caused by non-biodegradable petrochemical-based plastic packaging materials as well as the consumer's demand for high quality food products has caused an increasing interest in developing biodegradable packaging materials using annually renewable natural biopolymers such as polysaccharides and proteins. Inherent shortcomings of natural polymer-based packaging materials such as low mechanical properties and low water resistance can be recovered by applying a nanocomposite technology. Polymer nanocomposites, especially natural biopolymer-layered silicate nanocomposites, exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased modulus and strength, decreased gas permeability, and increased water resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. Consequently, natural biopolymer-based nanocomposite packaging materials with bio-functional properties have a huge potential for application in the active food packaging industry. In this review, recent advances in the preparation of natural biopolymer-based films and their nanocomposites, and their potential use in packaging applications are addressed.

Versatile Software Package For Near Real-Time Analysis of Experimental Data

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Hoadley, Sherwood T.

1998-01-01

This paper provides an overview of a versatile software package developed for time- and frequency-domain analyses of experimental wind-tunnel data. This package, originally developed for analyzing data in the NASA Langley Transonic Dynamics Tunnel (TDT), is applicable for analyzing any time-domain data. A Matlab-based software package, TDT-analyzer, provides a compendium of commonly-required dynamic analysis functions in a user-friendly interactive and batch processing environment. TDT-analyzer has been used extensively to provide on-line near real-time and post-test examination and reduction of measured data acquired during wind tunnel tests of aeroelastically-scaled models of aircraft and rotorcraft as well as a flight test of the NASA High Alpha Research Vehicle (HARV) F-18. The package provides near real-time results in an informative and timely manner far exceeding prior methods of data reduction at the TDT.

Humidity Data for 9975 Shipping Packages with Softwood Fiberboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daugherty, W. L.

The 9975 surveillance program is developing a technical basis to support extending the storage period of 9975 packages in K-Area Complex beyond the currently approved 15 years. A key element of this effort is developing a better understanding of degradation of the fiberboard assembly under storage conditions. This degradation is influenced greatly by the moisture content of the fiberboard, which is not well characterized on an individual package basis. Direct measurements of humidity and fiberboard moisture content have been made on two test packages with softwood fiberboard and varying internal heat levels from 0 up to 19W. Comparable measurements withmore » cane fiberboard have been reported previously. With an internal heat load, a temperature gradient in the fiberboard assembly leads to varying relative humidity in the air around the fiberboard. However, the absolute humidity tends to remain approximately constant throughout the package, especially at lower heat loads.« less

The Package-Based Development Process in the Flight Dynamics Division

NASA Technical Reports Server (NTRS)

Parra, Amalia; Seaman, Carolyn; Basili, Victor; Kraft, Stephen; Condon, Steven; Burke, Steven; Yakimovich, Daniil

1997-01-01

The Software Engineering Laboratory (SEL) has been operating for more than two decades in the Flight Dynamics Division (FDD) and has adapted to the constant movement of the software development environment. The SEL's Improvement Paradigm shows that process improvement is an iterative process. Understanding, Assessing and Packaging are the three steps that are followed in this cyclical paradigm. As the improvement process cycles back to the first step, after having packaged some experience, the level of understanding will be greater. In the past, products resulting from the packaging step have been large process documents, guidebooks, and training programs. As the technical world moves toward more modularized software, we have made a move toward more modularized software development process documentation, as such the products of the packaging step are becoming smaller and more frequent. In this manner, the QIP takes on a more spiral approach rather than a waterfall. This paper describes the state of the FDD in the area of software development processes, as revealed through the understanding and assessing activities conducted by the COTS study team. The insights presented include: (1) a characterization of a typical FDD Commercial Off the Shelf (COTS) intensive software development life-cycle process, (2) lessons learned through the COTS study interviews, and (3) a description of changes in the SEL due to the changing and accelerating nature of software development in the FDD.

Through the eyes of professional developers: Understanding the design of learning experiences for science teachers

NASA Astrophysics Data System (ADS)

Higgins, Tara Eileen

Professional development is important for improving teacher practice and student learning, particularly in inquiry-oriented and technology-enhanced science instruction. This study examines professional developers' practices and their impact on teachers' classroom instruction and student achievement. It analyzes professional developers designing and implementing a five-year professional development program designed to support middle school science teachers. The professional developers are four university-based researchers who worked with sixteen science teachers over three years, setting program goals, facilitating workshops, providing in-classroom support for teachers, and continually refining the program. The analysis is guided by the knowledge integration perspective, a sociocognitive framework for understanding how teachers and professional developers integrate their ideas about teaching and learning. The study investigates the professional developers' goals and teachers' interpretations of those goals. It documents how professional developers plan teacher learning experiences and explores the connection between professional development activities and teachers' classroom practice. Results are based on two rounds of interviews with professional developers, audio recordings of professional developers' planning meetings and videotaped professional development activities. Data include classroom observations, teacher interviews, teacher reflections during professional development activities, and results from student assessments. The study shows the benefit of a professional development approach that relies on an integrated cycle of setting goals, understanding teachers' interpretations, and refining implementation. The professional developers based their design on making inquiry and technology accessible, situating professional development in teachers' work, supporting collaboration, and sustaining learning. The findings reflect alignment of the design goals with the perspective guiding the curriculum design, and consider multiple goals for student and teacher learning. The study has implications for professional development design, particularly in supporting inquiry-oriented science and technology-enhanced instruction. Effective professional developers formulate coherent conceptions of program goals, use evidence of teacher outcomes to refine their goals and practices, and connect student and teacher learning. This study illustrates the value of research on the individuals who design and lead professional development programs.

On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications.

PubMed

Arrieta, Marina Patricia; Samper, María Dolores; Aldas, Miguel; López, Juan

2017-08-29

Poly(lactic acid) (PLA) is the most used biopolymer for food packaging applications. Several strategies have been made to improve PLA properties for extending its applications in the packaging field. Melt blending approaches are gaining considerable interest since they are easy, cost-effective and readily available processing technologies at the industrial level. With a similar melting temperature and high crystallinity, poly(hydroxybutyrate) (PHB) represents a good candidate to blend with PLA. The ability of PHB to act as a nucleating agent for PLA improves its mechanical resistance and barrier performance. With the dual objective to improve PLAPHB processing performance and to obtain stretchable materials, plasticizers are frequently added. Current trends to enhance PLA-PHB miscibility are focused on the development of composite and nanocomposites. PLA-PHB blends are also interesting for the controlled release of active compounds in the development of active packaging systems. This review explains the most relevant processing aspects of PLA-PHB based blends such as the influence of polymers molecular weight, the PLA-PHB composition as well as the thermal stability. It also summarizes the recent developments in PLA-PHB formulations with an emphasis on their performance with interest in the sustainable food packaging field. PLA-PHB blends shows highly promising perspectives for the replacement of traditional petrochemical based polymers currently used for food packaging.

Mapping of initiatives to increase membership in mutual health organizations in Benin

PubMed Central

2012-01-01

Introduction Mutual health organizations (MHO) have been implemented across Africa to increase access to healthcare and improve financial protection. Despite efforts to develop MHOs, low levels of both initial enrolment and membership renewals continue to threaten their financial viability. The purpose of this study was to map initiatives implemented to increase the pool of MHO members in Benin. Methods A multiple case study was conducted to assess MHOs supported by five major promoters in Benin. Three months of fieldwork resulted in 23 semi-structured interviews and two focus groups with MHO promoters, technicians, elected members, and health professionals affiliated with the MHOs. Fifteen non-structured interviews provided additional information and a valuable source of triangulation. Results MHOs have adopted a wide range of initiatives targeting different entry points and involving a variety of stakeholders. Initiatives have included new types of collective health insurance packages and efforts to raise awareness by going door-to-door and organizing health education workshops. Different types of partnerships have been established to strengthen relationships with healthcare professionals and political leaders. However, the selection and implementation of these initiatives have been limited by insufficient financial and human resources. Conclusions The study highlights the importance of prioritizing sustainable strategies to increase MHO membership. No single MHO initiative has been able to resolve the issue of low membership on its own. If combined, existing initiatives could provide a comprehensive and inclusive approach that would target all entry points and include key stakeholders such as household decision-makers, MHO elected members, healthcare professionals, community leaders, governmental authorities, medical advisors, and promoters. There is a need to evaluate empirically the implementation of these interventions. Mechanisms to promote dialogue between MHO stakeholders would be useful to devise innovative strategies, avoid repeating unsuccessful ones, and develop a coordinated plan to promote MHOs. PMID:23217438

Evaluating and planning the radioactive waste options for dismantling the Tokamak Fusion Test Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rule, K.; Scott, J.; Larson, S.

1995-12-31

The Tokamak Fusion Test Reactor (TFTR) is a one-of-a kind tritium fusion research reactor, and is planned to be decommissioned within the next several years. This is the largest fusion reactor in the world and as a result of deuterium-tritum reactions is tritium contaminated and activated from 14 Mev neutrons. This presents many unusual challenges when dismantling, packaging and disposing its components and ancillary systems. Special containers are being designed to accommodate the vacuum vessel, neutral beams, and tritium delivery and processing systems. A team of experienced professionals performed a detailed field study to evaluate the requirements and appropriate methodsmore » for packaging the radioactive materials. This team focused on several current and innovative methods for waste minimization that provides the oppurtunmost cost effective manner to package and dispose of the waste. This study also produces a functional time-phased schedule which conjoins the waste volume, weight, costs and container requirements with the detailed project activity schedule for the entire project scope. This study and project will be the first demonstration of the decommissioning of a tritium fusion test reactor. The radioactive waste disposal aspects of this project are instrumental in demonstrating the viability of a fusion power reactor with regard to its environmental impact and ultimate success.« less

Modification of in-pack conditions to extend the storage life of vacuum packaged lamb.

PubMed

Gill, C O; Penney, N

1985-01-01

High pH (>5·9) lamb loins from a research abattoir were subjected to differing packaging treatments to determine whether package modification could reliably extend the storage life of chilled lamb cuts beyond that attained by cuts vacuum-packaged in film of low gas permeability, as in current commercial practice. Treatments applied were carbon dioxide flushing or addition of a citrate buffer (pH 4·8), a 5% lactic acid solution or a Lactobacillus inoculum (plastic packs only) and packaging in a plastic film of moderately low oxygen permeability (140 cc/m(2)/24 h at 25°C and 90% relative humidity) or in a foil laminate of immeasurably low oxygen permeability. After 12 weeks' storage at -0.5°C, the cuts packaged in the plastic film were spoiled by off-odours produced by enterobacteria, except for inoculated cuts, which, instead, had developed unacceptable dairy flavours. In contrast, cuts packaged in foil laminate developed floras of lactobacilli that had not caused spoilage after 12 weeks, and meat colour was much improved by the exclusion of oxygen. Loin cuts from a commercial packaging operation were packaged in a shrinkable plastic film of low oxygen permeability (30 to 40 cc/m(2)/24 h at 25°C and 90% relative humidity), in foil laminate, or in foil laminate after the addition of 5% lactic acid solution. For the first 6 weeks, cuts were stored in a commercial chiller nominally operating at 0°C; subsequently, they were held in a laboratory chiller at -0.5°C. Some cuts packaged in the shrinkable plastic were spoiled after 9 weeks' storage and all were spoiled at 12 weeks, because of off-flavours produced by enterobacteria. All cuts packaged in the foil laminate were very acceptable at 9 weeks but most were spoiled by off-flavours at 12 weeks. Most cuts treated with lactic acid and packaged in foil laminate were unspoiled after 12 weeks. The packaging requirements indicated to be necessary for reliable extension of the storage life of vacuum packaged lamb are discussed. Copyright © 1985. Published by Elsevier Ltd.

The US Food and Drug Administration's Risk Evaluation and Mitigation Strategy (REMS) Program - Current Status and Future Direction.

PubMed

Wu, Jasmanda; Juhaeri, Juhaeri

2016-12-01

The US Food and Drug Administration (FDA) Amendments Act of 2007 granted the FDA new authorities to enhance drug safety by requiring application holders to submit a proposed Risk Evaluation and Mitigation Strategy (REMS). A REMS is a required risk management plan that uses tools beyond the package insert. REMS elements may include a medication guide and patient package insert for patients and a communication plan focused on health care professionals. Elements to assure safe use (ETASUs) are put in place to mitigate a specific known serious risk when other less restrictive elements of a REMS are not sufficient to mitigate such risk. An implementation system is required for an REMS that includes the ETASUs. With approximately eight years of experience with REMS programs, many health care settings have created systems to manage REMS and also to integrate REMS into their practice settings. At the same time, there are issues associated with the development and implementation of REMS. In 2011, FDA created the REMS Integration Initiative to develop guidance on how to apply statutory criteria to determine when a REMS is required, to improve standardization and assessment of REMS, and to improve integration of REMS into the existing healthcare system. A key component of the REMS Integration Initiative is stakeholder outreach to better understand how existing REMS programs are working and to identify opportunities for improvement. This review attempts to share our company's experience with the REMS program, and to provide updates on FDA's efforts to improve REMS communication, to standardize REMS process, to reduce REMS program burdens and to build a common REMS platform. Copyright © 2016 Elsevier HS Journals, Inc. All rights reserved.

Environmental mediation: A method for protecting environmental sciences and scientists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vigerstad, T.J.; Berdt Romilly, G. de; MacKeigan, P.

1995-12-31

The primary role for scientific analysis of environmental and human risks has been to support decisions that have arisen out of a regulatory decision-making model called ``Command and Control`` or ``Decide and Defend``. A project or a policy is proposed and permission for its implementation is sought. Permission-gaining sometimes requires a number of technical documents: Environmental Impact Statements, Public Health Risk Evaluations, policy analysis documents. Usually, little of this analysis is used to make any real decisions. This is a fact that has lead to enormous frustration and an atmosphere of distrust of government, industry and consulting scientists. There havemore » been a number of responses by governmental and industrial managers, some scientists, and even the legal system, to mitigate the frustration and distrust. One response has been to develop methods of packaging information using language which is considered more ``understandable`` to the public: Ecosystem Health, Social Risk Assessment, Economic Risk Management, Enviro-hazard Communication, Risk Focus Analysis, etc. A second is to develop more sophisticated persuasion techniques-a potential misuse of Risk Communication. A third is proposing to change the practice of science itself: e.g., ``post-normal science`` and ``popular epidemiology``. A fourth has been to challenge the definition of ``expert`` in legal proceedings. All of these approaches do not appear to address the underlying issue: lack of trust and credibility. To address this issue requires an understanding of the nature of environmental disputes and the development of an atmosphere of trust and credibility. The authors propose Environmental Mediation as a response to the dilemma faced by professional environmental scientists, engineers, and managers that protects the professionals and their disciplines.« less

Health Libraries and Information Services in Tanzania: A Strategic Assessment.

PubMed

Haruna, Hussein; Mtoroki, Majaliwa; Gerendasy, Dan D; Detlefsen, Ellen G

The intention of the Government of Tanzania is to establish more health information resource canters in all health facilities. With this regard, health information science personnel are needed to provide adequate and accurate health information services. However, availability of these personnel remains to be a challenge because of their non-existence. To identify the current status and local impact of health sciences libraries and user perception of these libraries, as a prerequisite to the development of a competence-based curriculum for health information science training in Tanzania. A needs assessment was carried out using a convenience sample of local respondents, including librarians, trainers, academicians, students, health care providers, and patients and families, drawn from national, referral, regional, district hospitals, health training institutions, and universities from both government and nongovernment entities in Tanzania. A focus group approach was used to gather data from respondents. Results from this assessment revealed that health science libraries in Tanzania are faced with the challenges of insufficient infrastructure, old technology, limited facilities and furniture, inadequate and incompetent library staff, lack of health sciences librarians, outdated and insufficient resources, and low knowledge and use of information technologies by library clients. Most respondents would prefer to have both physical and electronic libraries, as well as librarians with specialized health information science skills, to cope with changing nature of the medical field. The findings obtained from this assessment are strong enough to guide the development of a curriculum and training strategy and an operational plan and training packages for health information professionals. The development of a training curriculum for health information science professionals will mean better health information service delivery for Tanzania. Copyright © 2016 Icahn School of Medicine at Mount Sinai. All rights reserved.

Educational intervention in Primary Care for the prevention of congenital syphilis 1

PubMed Central

Lazarini, Flaviane Mello; Barbosa, Dulce Aparecida

2017-01-01

ABSTRACT Objectives: to evaluate the efficiency of educational interventions related to the knowledge of health care professionals of Primary Care and to verify the impact on the vertical transmission rates of congenital syphilis. Method: a quasi-experimental study conducted in the city of Londrina, Paraná, between 2013 and 2015. An educational intervention on diagnosis, treatment and notification was carried out with 102 professionals with knowledge measurement before and after the intervention. Incidence and mortality data from congenital syphilis were taken from the system for notifiable diseases (SINAN) and the Mortality Information System (SIM). Excel tabulation and statistical analysis was done in the Statistical Package for Social Sciences, version 2.1. A descriptive and inferential analysis was performed. Results: the mean number of correct responses increased from 53% to 74.3% after the intervention (p < 0.01). The adherence to professional training was 92.6%. There was a significant reduction in the vertical transmission rate of syphilis from 75% in 2013 to 40.2% in 2015. In 2014 and 2015 there were no records of infant mortality from this condition. Conclusion: the educational intervention significantly increased the knowledge of health professionals about syphilis and collaborated to reduce the rate of vertical transmission of the disease. PMID:28146181

Sport psychology education for sport injury rehabilitation professionals: a systematic review.

PubMed

Heaney, Caroline A; Walker, Natalie C; Green, Alison J K; Rostron, Claire L

2015-02-01

Sport psychology education has been shown to have a positive impact on the practice of sport injury rehabilitation professionals (SIRPs). The purpose of this paper is to review recommendations relating to such education. The paper presents a review of existing literature relating to the content and mode of delivery for a sport psychology education programme for SIRPs. The review seeks to address four questions: (1) What topic areas do researchers suggest should be integrated into the sport psychology education of SIRPs? (2) What topic areas are currently being recommended by professional bodies? (3) What are the findings of research examining the impact of sport psychology education on SIRPs? and (4) What do researchers recommend to be the most appropriate mode of delivery for sport psychology education for SIRPs? The findings of the review suggest that in order to maximise adherence amongst already qualified SIRPs sport psychology education should be delivered in a flexible short duration package. Additionally three broad areas that sport psychology education should cover emerged: (1) understanding of the psychological impact of injury, (2) interventions and psychological skills/techniques, and (3) referral and professional boundaries. This has important implications for the future training of SIRPs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Application of Au-Sn eutectic bonding in hermetic radio-frequency microelectromechanical system wafer level packaging

NASA Astrophysics Data System (ADS)

Wang, Qian; Choa, Sung-Hoon; Kim, Woonbae; Hwang, Junsik; Ham, Sukjin; Moon, Changyoul

2006-03-01

Development of packaging is one of the critical issues toward realizing commercialization of radio-frequency-microelectromechanical system (RF-MEMS) devices. The RF-MEMS package should be designed to have small size, hermetic protection, good RF performance, and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low-temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at temperatures below 300°C is used. Au-Sn multilayer metallization with a square loop of 70 µm in width is performed. The electrical feed-through is achieved by the vertical through-hole via filling with electroplated Cu. The size of the MEMS package is 1 mm × 1 mm × 700 µm. The shear strength and hermeticity of the package satisfies the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

Development of low cost, high reliability sealing techniques for hybrid microcircuit packages. Phase 2, supplement 1: Moisture permeation of adhesive-sealed hybrid microcircuit packages

NASA Technical Reports Server (NTRS)

Perkins, K. L.; Licari, J. J.

1978-01-01

The susceptibility of adhesive-sealed ceramic packages to moisture permeation was investigated. The two adhesives, Ablebond 789-1 and Epo-Tek H77, were evaluated as package sealants. These adhesives were previously selected as the most promising candidates for this application from a group of ten adhesives. Ceramic packages sealed with these adhesives were exposed to temperature-humidity conditions of 25 C/98 percent RH, 50 C/60 percent RH, 50 C/98 percent RH, and 85 C/85 percent RH and their moisture contents using were monitored solid state moisture sensors sealed inside them. Five packages were tested at each of these exposures - two ceramic packages sealed with each of the two adhesives and one seam-sealed gold-plated Kovar package. This latter package was included to serve as a control. The results showed that the adhesive-sealed packages were not hermetic to moisture. The rates at which moisture entered the packages increased with the severity of the exposure environments (i.e., higher temperatures and higher moisture vapor pressures) with greater dependence on temperature than on moisture vapor pressure.

Essential interventions: implementation strategies and proposed packages of care

PubMed Central

2014-01-01

In an effort to accelerate progress towards achieving Millennium Development Goal (MDG) 4 and 5, provision of essential reproductive, maternal, newborn and child health (RMNCH) interventions is being considered. Not only should a state-of-the-art approach be taken for services delivered to the mother, neonate and to the child, but services must also be deployed across the household to hospital continuum of care approach and in the form of packages. The paper proposed several packages for improved maternal, newborn and child health that can be delivered across RMNCH continuum of care. These packages include: supportive care package for women to promote awareness related to healthy pre-pregnancy and pregnancy interventions; nutritional support package for mother to improve supplementation of essential nutrients and micronutrients; antenatal care package to detect, treat and manage infectious and noninfectious diseases and promote immunization; high risk care package to manage preeclampsia and eclampsia in pregnancy; childbirth package to promote support during labor and importance of skilled birth attendance during labor; essential newborn care package to support healthy newborn care practices; and child health care package to prevent and manage infections. This paper further discussed the implementation strategies for employing these interventions at scale. PMID:25178110

The LEONARDO-DA-VINCI pilot project "e-learning-assistant" - Situation-based learning in nursing education.

PubMed

Pfefferle, Petra Ina; Van den Stock, Etienne; Nauerth, Annette

2010-07-01

E-learning will play an important role in the training portfolio of students in higher and vocational education. Within the LEONARDO-DA-VINCI action programme transnational pilot projects were funded by the European Union, which aimed to improve the usage and quality of e-learning tools in education and professional training. The overall aim of the LEONARDO-DA-VINCI pilot project "e-learning-assistant" was to create new didactical and technical e-learning tools for Europe-wide use in nursing education. Based on a new situation-oriented learning approach, nursing teachers enrolled in the project were instructed to adapt, develop and implement e- and blended learning units. According to the training contents nursing modules were developed by teachers from partner institutions, implemented in the project centers and evaluated by students. The user-package "e-learning-assistant" as a product of the project includes two teacher training units, the authoring tool "synapse" to create situation-based e-learning units, a student's learning platform containing blended learning modules in nursing and an open sourced web-based communication centre. Copyright 2009 Elsevier Ltd. All rights reserved.

The INTERGROWTH-21st Project Neurodevelopment Package: A Novel Method for the Multi-Dimensional Assessment of Neurodevelopment in Pre-School Age Children

PubMed Central

Fernandes, Michelle; Stein, Alan; Newton, Charles R.; Cheikh-Ismail, Leila; Kihara, Michael; Wulff, Katharina; de León Quintana, Enrique; Aranzeta, Luis; Soria-Frisch, Aureli; Acedo, Javier; Ibanez, David; Abubakar, Amina; Giuliani, Francesca; Lewis, Tamsin; Kennedy, Stephen; Villar, Jose

2014-01-01

Background The International Fetal and Newborn Growth Consortium for the 21st Century (INTERGROWTH-21st) Project is a population-based, longitudinal study describing early growth and development in an optimally healthy cohort of 4607 mothers and newborns. At 24 months, children are assessed for neurodevelopmental outcomes with the INTERGROWTH-21st Neurodevelopment Package. This paper describes neurodevelopment tools for preschoolers and the systematic approach leading to the development of the Package. Methods An advisory panel shortlisted project-specific criteria (such as multi-dimensional assessments and suitability for international populations) to be fulfilled by a neurodevelopment instrument. A literature review of well-established tools for preschoolers revealed 47 candidates, none of which fulfilled all the project's criteria. A multi-dimensional assessment was, therefore, compiled using a package-based approach by: (i) categorizing desired outcomes into domains, (ii) devising domain-specific criteria for tool selection, and (iii) selecting the most appropriate measure for each domain. Results The Package measures vision (Cardiff tests); cortical auditory processing (auditory evoked potentials to a novelty oddball paradigm); and cognition, language skills, behavior, motor skills and attention (the INTERGROWTH-21st Neurodevelopment Assessment) in 35–45 minutes. Sleep-wake patterns (actigraphy) are also assessed. Tablet-based applications with integrated quality checks and automated, wireless electroencephalography make the Package easy to administer in the field by non-specialist staff. The Package is in use in Brazil, India, Italy, Kenya and the United Kingdom. Conclusions The INTERGROWTH-21st Neurodevelopment Package is a multi-dimensional instrument measuring early child development (ECD). Its developmental approach may be useful to those involved in large-scale ECD research and surveillance efforts. PMID:25423589

Applying Various Comprehension Strategies. Learning Package No. 8.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on applying various comprehension strategies is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Cultural Literacy. Learning Package No. 44.

ERIC Educational Resources Information Center

Hong, Zhang, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on cultural literacy is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2010 CFR

2010-04-01

...). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that...). For purposes of this section, the term package design means the specific graphic arrangement or design... design of a container with respect to its shape or function. (4) Coordination with other provisions of...

Journal Writing. Learning Package No. 34.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on journal writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Design Approaches and Comparison of TAPS Packages for Engineering

ERIC Educational Resources Information Center

Sidhu, S. Manjit

2007-01-01

Purpose: The paper's purpose is to promote the use of modern technologies such as multimedia packages to engineering students. The aim is to help them to learning in their learning, visualization, problem solving and understanding engineering concepts such as in mechanics dynamics. Design/methodology/approach: TAPS packages are developed to help…

A TAPS Interactive Multimedia Package to Solve Engineering Dynamics Problem

ERIC Educational Resources Information Center

Sidhu, S. Manjit; Selvanathan, N.

2005-01-01

Purpose: To expose engineering students to using modern technologies, such as multimedia packages, to learn, visualize and solve engineering problems, such as in mechanics dynamics. Design/methodology/approach: A multimedia problem-solving prototype package is developed to help students solve an engineering problem in a step-by-step approach. A…

The Surgical Scrub. Learning Activity Package.

ERIC Educational Resources Information Center

Runge, Lillian

This learning activity package on the surgical scrub is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These…

Diagnostic Testing Package DX v 2.0 Technical Specification. Methodology Project.

ERIC Educational Resources Information Center

McArthur, David

This paper contains the technical specifications, schematic diagrams, and program printout for a computer software package for the development and administration of diagnostic tests. The second version of the Diagnostic Testing Package DX consists of a PASCAL-based set of modules located in two main programs: (1) EDITTEST creates, modifies, and…

Banning front-of-package food labels: first Amendment constraints on public health policy.

PubMed

Lytton, Timothy D

2011-06-01

In recent months, the FDA has begun a crackdown on misleading nutrition and health claims on the front of food packages by issuing warning letters to manufacturers and promising to develop stricter regulatory standards. Leading nutrition policy experts Marion Nestle and David Ludwig have called for an even tougher approach: a ban on all nutrition and health claims on the front of food packages. Nestle and Ludwig argue that most of these claims are scientifically unsound and misleading to consumers and that eliminating them would 'aid educational efforts to encourage the public to eat whole or minimally processed foods and to read the ingredients list on processed foods'. Nestle and Ludwig are right to raise concerns about consumer protection and public health when it comes to front-of-package food labels, but an outright ban on front-of-package nutrition and health claims would violate the First Amendment. As nutrition policy experts develop efforts to regulate front-of-package nutrition and health claims, they should be mindful of First Amendment constraints on government regulation of commercial speech.

Shelf life of packaged bakery goods--a review.

PubMed

Galić, K; Curić, D; Gabrić, D

2009-05-01

Packaging requirements for fresh bakery goods are often minimal as many of the products are for immediate consumption. However, packaging can be an important factor in extending the shelf life of other cereal-based goods (toast, frozen products, biscuits, cakes, pastas). Some amount of the texture changes and flavor loss manifest over the shelf life of a soft-baked good can usually be minimized or delayed by effective use of packaging materials. The gains in the extension of shelf life will be application specific. It is recognized that defining the shelf life of a food is a difficult task and is an area of intense research for food product development scientists (food technologists, microbiologists, packaging experts). Proper application of chemical kinetic principles to food quality loss allows for efficiently designing appropriate shelf-life tests and maximizing the useful information that can be obtained from the resulting data. In the development of any new food product including reformulating, change of packaging, or storage/distribution condition (to penetrate into a new market), one important aspect is the knowledge of shelf life.

The Hidden Cost of Buying a Computer.

ERIC Educational Resources Information Center

Johnson, Michael

1983-01-01

In order to process data in a computer, application software must be either developed or purchased. Costs for modifications of the software package and maintenance are often hidden. The decision to buy or develop software packages should be based upon factors of time and maintenance. (MLF)

Commercial portion-controlled foods in research studies: how accurate are label weights?

PubMed

Conway, Joan M; Rhodes, Donna G; Rumpler, William V

2004-09-01

The purpose of this study was to evaluate the reliability of label weights as surrogates for actual weights in commercial portion-controlled foods used in a research setting. Actual weights of replicate samples of 82 portion-controlled food items and 17 discrete units of food from larger packaging were determined over time. Comparison was made to the package label weights for the portion-controlled food items and the per-serving weights for the discrete units. The study was conducted at the US Department of Agriculture's Beltsville Human Nutrition Research Center's Human Study Facility, which houses a metabolic kitchen and human nutrition research facility. The primary outcome measures were the actual and label weights of 99 food items consumed by human volunteers during controlled feeding studies. Statistical analyses performed The difference between label and actual weights was tested by the paired t test for those data that complied with the assumptions of normality. The Wilcoxon signed rank test was used for the remainder of the data. Compliance with federal guidelines for packaged weights was also assessed. There was no statistical difference between actual and label weights for only 37 food items. The actual weights of 15 portion-controlled food items were 1% or more less than label weights, making them potentially out of compliance with federal guidelines. With advance planning and continuous monitoring, well-controlled feeding studies could incorporate portion-controlled food items and discrete units, especially beverages and confectionery products. Dietetics professionals should encourage individuals with diabetes and others on strict dietary regimens to check actual weights of portion-controlled products carefully against package weights.

Scripting MODFLOW model development using Python and FloPy

USGS Publications Warehouse

Bakker, Mark; Post, Vincent E. A.; Langevin, Christian D.; Hughes, Joseph D.; White, Jeremy; Starn, Jeffrey; Fienen, Michael N.

2016-01-01

Graphical user interfaces (GUIs) are commonly used to construct and postprocess numerical groundwater flow and transport models. Scripting model development with the programming language Python is presented here as an alternative approach. One advantage of Python is that there are many packages available to facilitate the model development process, including packages for plotting, array manipulation, optimization, and data analysis. For MODFLOW-based models, the FloPy package was developed by the authors to construct model input files, run the model, and read and plot simulation results. Use of Python with the available scientific packages and FloPy facilitates data exploration, alternative model evaluations, and model analyses that can be difficult to perform with GUIs. Furthermore, Python scripts are a complete, transparent, and repeatable record of the modeling process. The approach is introduced with a simple FloPy example to create and postprocess a MODFLOW model. A more complicated capture-fraction analysis with a real-world model is presented to demonstrate the types of analyses that can be performed using Python and FloPy.

Fostering students’ thinking skill and social attitude through STAD cooperative learning technique on tenth grade students of chemistry class

NASA Astrophysics Data System (ADS)

Kriswintari, D.; Yuanita, L.; Widodo, W.

2018-04-01

The aim of this study was to develop chemistry learning package using Student Teams Achievement Division (STAD) cooperative learning technique to foster students’ thinking skills and social attitudes. The chemistry learning package consisting of lesson plan, handout, students’ worksheet, thinking skill test, and observation sheet of social attitude was developed using the Dick and Carey model. Research subject of this study was chemistry learning package using STAD which was tried out on tenth grade students of SMA Trimurti Surabaya. The tryout was conducted using the one-group pre-test post-test design. Data was collected through observation, test, and questionnaire. The obtained data were analyzed using descriptive qualitative analysis. The findings of this study revealed that the developed chemistry learning package using STAD cooperative learning technique was categorized valid, practice and effective to be implemented in the classroom to foster students’ thinking skill and social attitude.

NORTICA—a new code for cyclotron analysis

NASA Astrophysics Data System (ADS)

Gorelov, D.; Johnson, D.; Marti, F.

2001-12-01

The new package NORTICA (Numerical ORbit Tracking In Cyclotrons with Analysis) of computer codes for beam dynamics simulations is under development at NSCL. The package was started as a replacement for the code MONSTER [1] developed in the laboratory in the past. The new codes are capable of beam dynamics simulations in both CCF (Coupled Cyclotron Facility) accelerators, the K500 and K1200 superconducting cyclotrons. The general purpose of this package is assisting in setting and tuning the cyclotrons taking into account the main field and extraction channel imperfections. The computer platform for the package is Alpha Station with UNIX operating system and X-Windows graphic interface. A multiple programming language approach was used in order to combine the reliability of the numerical algorithms developed over the long period of time in the laboratory and the friendliness of modern style user interface. This paper describes the capability and features of the codes in the present state.

Management of packaging waste in Poland--development agenda and accession to the EU.

PubMed

Grodzińska-Jurczak, Małgorzata; Zakowska, Hanna; Read, Adam

2004-06-01

In recent years the issue of the municipal waste in Poland has become increasingly topical, with a considerable rise in the waste generation, much of which can be attributed to a boom in product packaging (mainly plastic). The annual production of plastics packaging has been constantly increasing over the last 20 to 30 years, and now exceeds 3.7 million tons. Due to a lack of processing technologies and poorly developed selective segregation system, packaging waste is still treated as a part of the municipal solid waste (MSW) stream, most of which is landfilled. As a result of Poland's access to the European Union, previous legal regulations governing municipal waste management have been harmonized with those binding on the member countries. One of the main changes, the most revolutionary one, is to make entrepreneurs liable for environmental risks resulting from the introduction of packaging to the market, and for its recycling. In practice, all entrepreneurs are to ensure recovery, and recycling, of used packaging from products introduced to the market at the required level. In recent year, the required recycling levels were fulfilled for all types of materials but mainly by large institutions using grouped and transport packaging waste for that matter. Household packaging gathered in the selective segregation system at the municipalities was practically left alone. This paper is an attempt to describe the system and assess the first year of functioning of the new, revamped system of packaging waste management in Poland. Recommendations are made relating to those features that need to be included in packaging waste management systems in order to maximize their sustainability and harmonization with the EU legal system.

Knowledge of healthcare professionals about medication errors in hospitals

PubMed Central

Abdel-Latif, Mohamed M. M.

2016-01-01

Context: Medication errors are the most common types of medical errors in hospitals and leading cause of morbidity and mortality among patients. Aims: The aim of the present study was to assess the knowledge of healthcare professionals about medication errors in hospitals. Settings and Design: A self-administered questionnaire was distributed to randomly selected healthcare professionals in eight hospitals in Madinah, Saudi Arabia. Subjects and Methods: An 18-item survey was designed and comprised questions on demographic data, knowledge of medication errors, availability of reporting systems in hospitals, attitudes toward error reporting, causes of medication errors. Statistical Analysis Used: Data were analyzed with Statistical Package for the Social Sciences software Version 17. Results: A total of 323 of healthcare professionals completed the questionnaire with 64.6% response rate of 138 (42.72%) physicians, 34 (10.53%) pharmacists, and 151 (46.75%) nurses. A majority of the participants had a good knowledge about medication errors concept and their dangers on patients. Only 68.7% of them were aware of reporting systems in hospitals. Healthcare professionals revealed that there was no clear mechanism available for reporting of errors in most hospitals. Prescribing (46.5%) and administration (29%) errors were the main causes of errors. The most frequently encountered medication errors were anti-hypertensives, antidiabetics, antibiotics, digoxin, and insulin. Conclusions: This study revealed differences in the awareness among healthcare professionals toward medication errors in hospitals. The poor knowledge about medication errors emphasized the urgent necessity to adopt appropriate measures to raise awareness about medication errors in Saudi hospitals. PMID:27330261

Development of expert system for biobased polymer material selection: food packaging application.

PubMed

Sanyang, M L; Sapuan, S M

2015-10-01

Biobased food packaging materials are gaining more attention owing to their intrinsic biodegradable nature and renewability. Selection of suitable biobased polymers for food packaging applications could be a tedious task with potential mistakes in choosing the best materials. In this paper, an expert system was developed using Exsys Corvid software to select suitable biobased polymer materials for packaging fruits, dry food and dairy products. If - Then rule based system was utilized to accomplish the material selection process whereas a score system was formulated to facilitate the ranking of selected materials. The expert system selected materials that satisfied all constraints and selection results were presented in suitability sequence depending on their scores. The expert system selected polylactic acid (PLA) as the most suitable material.

FABRICATION AND DEPLOYMENT OF THE 9979 TYPE AF RADIOACTIVE WASTE PACKAGING FOR THE DEPARTMENT OF ENERGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, P.; Eberl, K.

2013-10-10

This paper summarizes the development, testing, and certification of the 9979 Type A Fissile Packaging that replaces the UN1A2 Specification Shipping Package eliminated from Department of Transportation (DOT) 49 CFR 173. The DOT Specification Package was used for many decades by the U.S. nuclear industry as a fissile waste container until its removal as an authorized container by DOT. This paper will discuss stream lining procurement of high volume radioactive material packaging manufacturing, such as the 9979, to minimize packaging production costs without sacrificing Quality Assurance. The authorized content envelope (combustible and non-combustible) as well as planned content envelope expansionmore » will be discussed.« less

Radiation treatment for sterilization of packaging materials

NASA Astrophysics Data System (ADS)

Haji-Saeid, Mohammad; Sampa, Maria Helena O.; Chmielewski, Andrzej G.

2007-08-01

Treatment with gamma and electron radiation is becoming a common process for the sterilization of packages, mostly made of natural or synthetic plastics, used in the aseptic processing of foods and pharmaceuticals. The effect of irradiation on these materials is crucial for packaging engineering to understand the effects of these new treatments. Packaging material may be irradiated either prior to or after filling. The irradiation prior to filling is usually chosen for dairy products, processed food, beverages, pharmaceutical, and medical device industries in the United States, Europe, and Canada. Radiation effects on packaging material properties still need further investigation. This paper summarizes the work done by different groups and discusses recent developments in regulations and testing procedures in the field of packaging technology.

Remote fluorescence lifetime inspection of hermeticity of packaged food containers

NASA Astrophysics Data System (ADS)

Mendoza, Edgar A.; Kempen, Cornelia; Sun, Sunjian; Esterkin, Yan

2014-09-01

This paper describes recent progress towards the development of a remote "frequency-domain" fluorescence lifetime (SeePhase™) monitor used for the real time hermetic seal leak inspection of packaged food containers. A multitude of food goods, meets, vegetables, and beverages are typically packaged within an inert environment to reduce the risk of bacteria growth and increase the storage life of the food product. The SeePhase™ system uses a multi-parameter oxygen, carbon dioxide, and moisture sensitive patch that is placed within the hermetic sealed food package. Upon the presence of gases oxygen, carbon dioxide, or moisture inside the hermetic sealed food package, the sensor patch produces a fluorescence lifetime signature characteristic of a hermetic seal leak damage of the package.

Career Mapping for Professional Development and Succession Planning.

PubMed

Webb, Tammy; Diamond-Wells, Tammy; Jeffs, Debra

Career mapping facilitates professional development of nurses by education specialists and nurse managers. On the basis of national Nursing Professional Development Scope and Standards, our education and professional development framework supports the organization's professional practice model and provides a foundation for the professional career map. This article describes development, implementation, and evaluation of the professional career map for nurses at a large children's hospital to support achievement of the nursing strategic goals for succession planning and professional development.

Development of a Communication Training Program to Improve Access to Legal Services for People with Complex Communication Needs

ERIC Educational Resources Information Center

Togher, Leanne; Balandin, Susan; Young, Katherine; Given, Fiona; Canty, Michael

2006-01-01

People with communication disabilities experience problems in accessing the justice system. In this article we describe the development of a multimedia package designed to train legal personnel to identify and reduce communication barriers to their services. The training package is being developed collaboratively by a diverse team that included…

Views and considerations on ICT-AT competences development within the ENTELIS project: The Case of Cyprus.

PubMed

Mavrou, Katerina; Meletiou-Mavrotheris, Maria

2015-01-01

This submission presents part of the EU funded project ENTELIS (European Network for Technology Enhanced Learning in an Inclusive Society), which aims to address issues of digital divide and digital equity for people with disabilities of all ages, and to increase participation and social inclusion. This paper presents the main activities and outcomes of the research work package of the project (WP3), from one of the partner countries, Cyprus. The aim of the conducted research was to identify the conceptions and beliefs of end-users, trainers, and service/technology providers and professionals, on the multifaceted relation between ICT/ICT-AT (Information Communication Technology - Assistive Technology) and learning of technology. Data collection involved the development and administration of three semi-structured interview protocols, one for each group of participants, in five different European countries. Results have been compiled to develop a State-of-Art Report on ICT and ICT-AT education and learning, highlighting the main trends, as well the main present barriers, emergent and future needs in terms of analysis, acquisition and reinforcing of digital competences bridging the worlds of education and work.

Practical Problems with Medication Use that Older People Experience: A Qualitative Study

PubMed Central

Notenboom, Kim; Beers, Erna; van Riet-Nales, Diana A; Egberts, Toine C G; Leufkens, Hubert G M; Jansen, Paul A F; Bouvy, Marcel L

2014-01-01

Objectives To identify the practical problems that older people experience with the daily use of their medicines and their management strategies to address these problems and to determine the potential clinical relevance thereof. Design Qualitative study with semistructured face-to-face interviews. Setting A community pharmacy and a geriatric outpatient ward. Participants Community-dwelling people aged 70 and older (N = 59). Measurements Participants were interviewed at home. Two researchers coded the reported problems and management strategies independently according to a coding scheme. An expert panel classified the potential clinical relevance of every identified practical problem and associated management strategy using a 3-point scale. Results Two hundred eleven practical problems and 184 management strategies were identified. Ninety-five percent of the participants experienced one or more practical problems with the use of their medicines: problems reading and understanding the instructions for use, handling the outer packaging, handling the immediate packaging, completing preparation before use, and taking the medicine. For 10 participants, at least one of their problems, in combination with the applied management strategy, had potential clinical consequences and 11 cases (5% of the problems) had the potential to cause moderate or severe clinical deterioration. Conclusion Older people experience a number of practical problems using their medicines, and their strategies to manage these problems are sometimes suboptimal. These problems can lead to incorrect medication use with clinically relevant consequences. The findings pose a challenge for healthcare professionals, drug developers, and regulators to diminish these problems. PMID:25516030

Hermetic electronic packaging of an implantable brain-machine-interface with transcutaneous optical data communication.

PubMed

Schuettler, Martin; Kohler, Fabian; Ordonez, Juan S; Stieglitz, Thomas

2012-01-01

Future brain-computer-interfaces (BCIs) for severely impaired patients are implanted to electrically contact the brain tissue. Avoiding percutaneous cables requires amplifier and telemetry electronics to be implanted too. We developed a hermetic package that protects the electronic circuitry of a BCI from body moisture while permitting infrared communication through the package wall made from alumina ceramic. The ceramic package is casted in medical grade silicone adhesive, for which we identified MED2-4013 as a promising candidate.

From Amorphous to Defined: Balancing the Risks of Spiral Development

DTIC Science & Technology

2007-04-30

630 675 720 765 810 855 900 Time (Week) Work started and active PhIt [Requirements,Iter1] : JavelinCalibration work packages1 1 1 Work started and...active PhIt [Technology,Iter1] : JavelinCalibration work packages2 2 2 Work started and active PhIt [Design,Iter1] : JavelinCalibration work packages3 3 3 3...Work started and active PhIt [Manufacturing,Iter1] : JavelinCalibration work packages4 4 Work started and active PhIt [Use,Iter1] : JavelinCalibration

Wafer-level vacuum/hermetic packaging technologies for MEMS

NASA Astrophysics Data System (ADS)

Lee, Sang-Hyun; Mitchell, Jay; Welch, Warren; Lee, Sangwoo; Najafi, Khalil

2010-02-01

An overview of wafer-level packaging technologies developed at the University of Michigan is presented. Two sets of packaging technologies are discussed: (i) a low temperature wafer-level packaging processes for vacuum/hermeticity sealing, and (ii) an environmentally resistant packaging (ERP) technology for thermal and mechanical control as well as vacuum packaging. The low temperature wafer-level encapsulation processes are implemented using solder bond rings which are first patterned on a cap wafer and then mated with a device wafer in order to encircle and encapsulate the device at temperatures ranging from 200 to 390 °C. Vacuum levels below 10 mTorr were achieved with yields in an optimized process of better than 90%. Pressures were monitored for more than 4 years yielding important information on reliability and process control. The ERP adopts an environment isolation platform in the packaging substrate. The isolation platform is designed to provide low power oven-control, vibration isolation and shock protection. It involves batch flip-chip assembly of a MEMS device onto the isolation platform wafer. The MEMS device and isolation structure are encapsulated at the wafer-level by another substrate with vertical feedthroughs for vacuum/hermetic sealing and electrical signal connections. This technology was developed for high performance gyroscopes, but can be applied to any type of MEMS device.

Academic Web Authoring Mulitmedia Development and Course Management Tools

ERIC Educational Resources Information Center

Halloran, Margaret E.

2005-01-01

Course management software enables faculty members to learn one software package for web-based curriculum, assessment, synchronous and asynchronous discussions, collaborative work, multimedia and interactive resource development. There are as many as 109 different course management software packages on the market and several studies have evaluated…

The NOD3 software package: A graphical user interface-supported reduction package for single-dish radio continuum and polarisation observations

NASA Astrophysics Data System (ADS)

Müller, Peter; Krause, Marita; Beck, Rainer; Schmidt, Philip

2017-10-01

Context. The venerable NOD2 data reduction software package for single-dish radio continuum observations, which was developed for use at the 100-m Effelsberg radio telescope, has been successfully applied over many decades. Modern computing facilities, however, call for a new design. Aims: We aim to develop an interactive software tool with a graphical user interface for the reduction of single-dish radio continuum maps. We make a special effort to reduce the distortions along the scanning direction (scanning effects) by combining maps scanned in orthogonal directions or dual- or multiple-horn observations that need to be processed in a restoration procedure. The package should also process polarisation data and offer the possibility to include special tasks written by the individual user. Methods: Based on the ideas of the NOD2 package we developed NOD3, which includes all necessary tasks from the raw maps to the final maps in total intensity and linear polarisation. Furthermore, plot routines and several methods for map analysis are available. The NOD3 package is written in Python, which allows the extension of the package via additional tasks. The required data format for the input maps is FITS. Results: The NOD3 package is a sophisticated tool to process and analyse maps from single-dish observations that are affected by scanning effects from clouds, receiver instabilities, or radio-frequency interference. The "basket-weaving" tool combines orthogonally scanned maps into a final map that is almost free of scanning effects. The new restoration tool for dual-beam observations reduces the noise by a factor of about two compared to the NOD2 version. Combining single-dish with interferometer data in the map plane ensures the full recovery of the total flux density. Conclusions: This software package is available under the open source license GPL for free use at other single-dish radio telescopes of the astronomical community. The NOD3 package is designed to be extendable to multi-channel data represented by data cubes in Stokes I, Q, and U.

Spooled packaging of shape memory alloy actuators

NASA Astrophysics Data System (ADS)

Redmond, John A.

A vast cross-section of transportation, manufacturing, consumer product, and medical technologies rely heavily on actuation. Accordingly, progress in these industries is often strongly coupled to the advancement of actuation technologies. As the field of actuation continues to evolve, smart materials show significant promise for satisfying the growing needs of industry. In particular, shape memory alloy (SMA) wire actuators present an opportunity for low-cost, high performance actuation, but until now, they have been limited or restricted from use in many otherwise suitable applications by the difficulty in packaging the SMA wires within tight or unusually shaped form constraints. To address this packaging problem, SMA wires can be spool-packaged by wrapping around mandrels to make the actuator more compact or by redirecting around multiple mandrels to customize SMA wire pathways to unusual form factors. The goal of this dissertation is to develop the scientific knowledge base for spooled packaging of low-cost SMA wire actuators that enables high, predictable performance within compact, customizable form factors. In developing the scientific knowledge base, this dissertation defines a systematic general representation of single and multiple mandrel spool-packaged SMA actuators and provides tools for their analysis, understanding, and synthesis. A quasi-static analytical model distills the underlying mechanics down to the three effects of friction, bending, and binding, which enables prediction of the behavior of generic spool-packaged SMA actuators with specifiable geometric, loading, frictional, and SMA material parameters. An extensive experimental and simulation-based parameter study establishes the necessary understanding of how primary design tradeoffs between performance, packaging, and cost are governed by the underlying mechanics of spooled actuators. A design methodology outlines a systematic approach to synthesizing high performance SMA wire actuators with mitigated material, power, and packaging costs and compact, customizable form factors. By examining the multi-faceted connections between performance, packaging, and cost, this dissertation builds a knowledge base that goes beyond implementing SMA actuators for particular applications. Rather, it provides a well-developed strategy for realizing the advantages of SMA actuation for a broadened range of applications, thereby enabling opportunities for new functionality and capabilities in industry.

Community pharmacists' perceptions of services that benefit older people in New Zealand.

PubMed

Tordoff, June; Chang, Shih Yen; Norris, Pauline T

2012-04-01

There is limited information in New Zealand about community pharmacists' perceptions of services that benefit older people. To explore the perceptions of community pharmacists' of services that benefit older people; the benefits perceived; and the experiences of pharmacists providing such services. Community pharmacies in New Zealand. A cross-sectional purpose-developed survey was carried out of all community pharmacies in New Zealand. This was followed by twenty qualitative telephone interviews of pharmacists identified as providing at least one specialized service. Interviews were recorded, transcribed verbatim, and coded for themes using constant comparison. Community pharmacists' opinions and perceptions in the cross-sectional survey and qualitative interviews. Responses were received from pharmacists in 403/905 evaluable pharmacies. All pharmacies provided some baseline services (advice, dispensing of prescriptions, medicines disposal) and 90% provided home deliveries of medicines. Adherence to medicines was supported by compliance packaging (96%), medication review (Medicines Use Review, MUR) (28%), and repeat prescription reminders (27%). Thirty-five percent provided screening (e.g. cholesterol, blood pressure), and 32% provided medicines education to community groups. Compliance packaging and home delivery were thought the services most beneficial for older people, and should help people adhere to their medicines. The 20 pharmacists interviewed by telephone provided 20 different specialized services (median 2, range 1-4). These included MUR, services to residential homes, visiting educators/special clinics, INR monitoring, services to hospices, and flu vaccination. Benefits perceived included improvements in adherence, patient safety, and patient-knowledge of medicines, and convenient access to services. "Patient need" was a frequent driver of services, and common facilitators for services were having appropriate training/skills, co-operation with health professionals, peer or expert support, sufficient time and funding. A lack of these facilitators were considered barriers as were resistance from general practitioners or the general public, or high set-up costs. Community pharmacists in New Zealand perceived they provide a range of services of potential benefit to older people for managing their medicines. Establishing new services requires cooperation from other health professionals, peer support, training, funding and time. Further research into patients' outcomes from new and established services is needed.

Qualification and Reliability for MEMS and IC Packages

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2004-01-01

Advanced IC electronic packages are moving toward miniaturization from two key different approaches, front and back-end processes, each with their own challenges. Successful use of more of the back-end process front-end, e.g. microelectromechanical systems (MEMS) Wafer Level Package (WLP), enable reducing size and cost. Use of direct flip chip die is the most efficient approach if and when the issues of know good die and board/assembly are resolved. Wafer level package solve the issue of known good die by enabling package test, but it has its own limitation, e.g., the I/O limitation, additional cost, and reliability. From the back-end approach, system-in-a-package (SIAP/SIP) development is a response to an increasing demand for package and die integration of different functions into one unit to reduce size and cost and improve functionality. MEMS add another challenging dimension to electronic packaging since they include moving mechanical elements. Conventional qualification and reliability need to be modified and expanded in most cases in order to detect new unknown failures. This paper will review four standards that already released or being developed that specifically address the issues on qualification and reliability of assembled packages. Exposures to thermal cycles, monotonic bend test, mechanical shock and drop are covered in these specifications. Finally, mechanical and thermal cycle qualification data generated for MEMS accelerometer will be presented. The MEMS was an element of an inertial measurement unit (IMU) qualified for NASA Mars Exploration Rovers (MERs), Spirit and Opportunity that successfully is currently roaring the Martian surface

Consumer preferences for beef color and packaging did not affect eating satisfaction.

PubMed

Carpenter, C E; Cornforth, D P; Whittier, D

2001-04-01

We investigated whether consumer preferences for beef colors (red, purple, and brown) or for beef packaging systems (modified atmosphere, MAP; vacuum skin pack, VSP; or overwrap with polyvinyl chloride, PVC) influenced taste scores of beef steaks and patties. To test beef color effects, boneless beef top loin steaks (choice) and ground beef patties (20% fat) were packaged in different atmospheres to promote development of red, purple, and brown color. To test effects of package type, steaks and patties were pre-treated with carbon monoxide in MAP to promote development of red color, and some meat was repackaged using VSP or PVC overwrap. The differently colored and packaged meats were separately displayed for members of four consumer panels who evaluated appearance and indicated their likelihood to purchase similar meat. Next, the panelists tasted meat samples from what they had been told were the packaging treatments just observed. However, the meat samples actually served were from a single untreated steak or patty. Thus, any difference in taste scores should reflect expectations established during the visual evaluation. The same ballot and sample coding were used for both the visual and taste evaluations. Color and packaging influenced (P<0.001) appearance scores and likelihood to purchase. Appearance scores were rated red>purple >brown and PVC >VSP>MAP. Appearance scores and likelihood to purchase were correlated (r=0.9). However, color or packaging did not affect (P>0.5) taste scores. Thus, consumer preferences for beef color and packaging influenced likelihood to purchase, but did not bias eating satisfaction.

Opportunities, challenges and concerns for the implementation and uptake of pelvic floor muscle assessment and exercises during the childbearing years: protocol for a critical interpretive synthesis.

PubMed

Salmon, Victoria E; Hay-Smith, E Jean C; Jarvie, Rachel; Dean, Sarah; Oborn, Eivor; Bayliss, Susan E; Bick, Debra; Davenport, Clare; Ismail, Khaled M; MacArthur, Christine; Pearson, Mark

2017-01-25

Pregnancy and childbirth are important risk factors for urinary incontinence (UI) in women. Pelvic floor muscle exercises (PFME) are effective for prevention of UI. Guidelines for the management of UI recommend offering pelvic floor muscle training (PFMT) to women during their first pregnancy as a preventive strategy. The objective of this review is to understand the relationships between individual, professional, inter-professional and organisational opportunities, challenges and concerns that could be essential to maximise the impact of PFMT during childbearing years and to effect the required behaviour change. Following systematic searches to identify sources for inclusion, we shall use a critical interpretive synthesis (CIS) approach to produce a conceptual model, mapping the relationships between individual, professional, inter-professional and organisational factors and the implementation, acceptability and uptake of PFME education, assessment and training during the childbearing years. Purposive sampling will be used to identify potentially relevant material relating to topics or areas of interest which emerge as the review progresses. A wide range of empirical and non-empirical sources will be eligible for inclusion to encompass the breadth of relevant individual, professional, inter-professional and organisational issues relating to PFME during childbearing years. Data analysis and synthesis will identify key themes, concepts, connections and relationships between these themes. Findings will be interpreted in relation to existing frameworks of implementation, attitudes and beliefs of individuals and behaviour change. We will collate examples to illustrate relationships expressed in the conceptual model and identify potential links between the model and drivers for change. The CIS review findings and resulting conceptual model will illustrate relationships between factors that might affect the implementation, acceptability and uptake of PFME education, assessment and training during the childbearing years. The model will inform the development and evaluation of a training package to support midwives with implementation and delivery of effective PFME during the antenatal period. The review forms part of the first phase of the United Kingdom National Institute for Health Research funded 'Antenatal Preventative Pelvic floor Exercises And Localisation (APPEAL)' programme (grant number: RP-PG-0514-20002) to prevent poor health linked to pregnancy and childbirth-related UI. PROSPERO: CRD42016042792.

Community-based benchmarking of the CMIP DECK experiments

NASA Astrophysics Data System (ADS)

Gleckler, P. J.

2015-12-01

A diversity of community-based efforts are independently developing "diagnostic packages" with little or no coordination between them. A short list of examples include NCAR's Climate Variability Diagnostics Package (CVDP), ORNL's International Land Model Benchmarking (ILAMB), LBNL's Toolkit for Extreme Climate Analysis (TECA), PCMDI's Metrics Package (PMP), the EU EMBRACE ESMValTool, the WGNE MJO diagnostics package, and CFMIP diagnostics. The full value of these efforts cannot be realized without some coordination. As a first step, a WCRP effort has initiated a catalog to document candidate packages that could potentially be applied in a "repeat-use" fashion to all simulations contributed to the CMIP DECK (Diagnostic, Evaluation and Characterization of Klima) experiments. Some coordination of community-based diagnostics has the additional potential to improve how CMIP modeling groups analyze their simulations during model-development. The fact that most modeling groups now maintain a "CMIP compliant" data stream means that in principal without much effort they could readily adopt a set of well organized diagnostic capabilities specifically designed to operate on CMIP DECK experiments. Ultimately, a detailed listing of and access to analysis codes that are demonstrated to work "out of the box" with CMIP data could enable model developers (and others) to select those codes they wish to implement in-house, potentially enabling more systematic evaluation during the model development process.

Nanostructured bioactive polymers used in food-packaging.

PubMed

Mateescu, Andreea L; Dimov, Tatiana V; Grumezescu, Alexandru M; Gestal, Monica C; Chifiriuc, Mariana C

2015-01-01

The development of effective packaging materials is crucial, because food microorganisms determine economic and public health issues. The current paper describes some of the most recent findings in regards of food preservation through novel packaging methods, using biodegradable polymers, efficient antimicrobial agents and nanocomposites with improved mechanical and oxidation stability, increased biodegradability and barrier effect comparatively with conventional polymeric matrices.

Gardening and Groundskeeping: A Series of Learning Activity Packages. Volume I: Learning Activity Packages 1-42.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Agricultural Education Section.

These forty-two learning activity packages, intended for student use, are based on a catalog of performance objectives, criterion-referenced measures, and performance guides for gardening-groundskeeping developed by the Vocational Education Consortium of States (V-TECS). They are organized by four areas of instruction: Organizing and Planning…

Grouping Students and Pacing Instruction. Learning Package No. 15.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on grouping students and pacing instruction is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

Language Diversity and Reading Instruction. Learning Package No. 21.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on language diversity and reading instruction is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Observation and Feedback. Learning Package No. 12.

ERIC Educational Resources Information Center

Aiex, Nola Kortner; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on observation and feedback is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Extending the Basal. Learning Package No. 13.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on extending the basal is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Using Skills and Strategies for Effective Learning. Learning Package No. 9.

ERIC Educational Resources Information Center

Hong, Zhang; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on using skills and strategies for effective learning is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the…

Writing Strategies for Gifted Children. Learning Package No. 45.

ERIC Educational Resources Information Center

Hyslop, Nancy; Smith, Carl, Comp.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing strategies for gifted children is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Trends and Issues in Reading Education. Learning Package No. 11.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on trends and issues in reading education is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

The Changing Perspective in Reading Assessment. Learning Package No. 14.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on changing perspective in reading assessment is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Making Writing Public. Learning Package No. 35.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on making writing public is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Promoting Language Growth across the Curriculum. Learning Package No. 18.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on language across the curriculum is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Reading Programs for Gifted Readers. Learning Package No. 28.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on reading programs for gifted readers is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Reader Response Theory and Related Instructional Strategies. Learning Package No. 24.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on reader response theory and related instructional strategies is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on…

Children and the Library. Learning Package No. 41.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on children and the library is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving…

Integrating the Language Arts. Learning Package No. 48.

ERIC Educational Resources Information Center

Chao, Han-Hua, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on integrating the language arts is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Spelling and the Writing Process. Learning Package No. 36.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on spelling and the writing process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Strategic Thinking through Writing. Learning Package No. 37.

ERIC Educational Resources Information Center

Hong, Zhang, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on strategic thinking through writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a…

Using Folk Literature. Learning Package No. 3.

ERIC Educational Resources Information Center

Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on using folk literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of several…

Appreciation of Literature. Learning Package No. 49.

ERIC Educational Resources Information Center

Kelly, Dawn, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on appreciating literature is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

Writing Apprehension and the Writing Process. Learning Package No. 32.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing apprehension and the writing process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Involving Parents in the Reading Process. Learning Package No. 7.

ERIC Educational Resources Information Center

Simic, Marge; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on involving parents in the reading process is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full…

Collaborative and Cooperative Learning Techniques. Learning Package No. 6.

ERIC Educational Resources Information Center

Compton, Joe; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on collaborative and cooperative learning techniques is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic;…

Motivating Low Performing Students. Learning Package No. 22.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on motivating low performing students is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text…

Reading in the Content Areas. Learning Package No. 4.

ERIC Educational Resources Information Center

Collins, Norma; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on reading in the content areas is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Television Viewing and Reading. Learning Package No. 23.

ERIC Educational Resources Information Center

Compton, Joe; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on television viewing and reading is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the full text of…

Assessing Performance through Informal Techniques. Learning Package No. 10.

ERIC Educational Resources Information Center

Nelson, Carol; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on assessing performance through informal techniques is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic;…

Writing across the Curriculum. Learning Package No. 50.

ERIC Educational Resources Information Center

Kelly, Dawn, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on writing across the curriculum is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture…

Ways To Evaluate Writing. Learning Package No. 47.

ERIC Educational Resources Information Center

Hyslop, Nancy, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on ways to evaluate writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving…

Computers and Writing. Learning Package No. 33.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on computers and writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

26 CFR 1.263(a)-4 - Amounts paid to acquire or create intangibles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the meaning of this paragraph (b)(3). (v) Creation of package design. Amounts paid to develop a package design are treated as amounts that do not create a separate and distinct intangible asset within the meaning of this paragraph (b)(3). For purposes of this section, the term package design means the...

Introduction to Human Services, Chapter III. Video Script Package, Text, and Audio Script Package.

ERIC Educational Resources Information Center

Miami-Dade Community Coll., FL.

Video, textual, and audio components of the third module of a multi-media, introductory course on Human Services are presented. The module packages, developed at Miami-Dade Community College, deal with technology, social change, and problem dependencies. A video cassette script is first provided that explores the "traditional,""inner," and "other…

The Relationship between Reading and Writing. Learning Package No. 40.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on the relationship between reading and writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC…

Expanding Thematic Units beyond the Textbook. Learning Package No. 2.

ERIC Educational Resources Information Center

Chao, Han-Hua; Smith, Carl, Comp.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on expanding thematic units beyond the textbook is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes a comprehensive search of the ERIC database; a lecture giving an overview on the topic; the…

Writing as Exploration. Learning Package No. 31.

ERIC Educational Resources Information Center

Collins, Norma, Comp.; Smith, Carl, Ed.

Originally developed as part of a project for the Department of Defense Schools (DoDDS) system, this learning package on expressive writing is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an…

The State System Exercise. Learning Packages in International Relations. Learning Package One.

ERIC Educational Resources Information Center

Coplin, William D.

Learning package 1, the first in a series of four, incorporates a simulation exercise designed to help students in higher education understand factors that affect the stability of the international relations system. Focus is on a "system" perspective in order to show the historical development and to point up the operation of various…

Social Science Elective Packages: An Independent Study Program for Grade 12.

ERIC Educational Resources Information Center

Moody, David B.

During the winter semester of 1970 a seminar was conducted for doctoral students in social studies education as a practicum in curriculum development to meet some of the special needs of the small high school, specifically the production of social science independent study packages. The packages produced were one-half Carnegie unit equivalent…

Using Peer-Mediated Literacy-Based Behavioral Interventions to Increase First Aid Safety Skills in Students With Developmental Disabilities.

PubMed

Kearney, Kelly B; Brady, Michael P; Hall, Kalynn; Honsberger, Toby

2017-08-01

Many adolescents with developmental disabilities do not learn the safety skills needed to maintain physical well-being in domestic and community environments. Literacy-based behavioral interventions (LBBIs) that combine print, pictures, and behavioral rehearsal are effective for promoting acquisition and maintenance of self-care skills, but have not been investigated as safety skill intervention. Also, LBBIs have primarily been implemented by teachers and other professionals. In this study, a peer partner was taught to deliver an LBBI story to students so they would learn to perform a basic first aid routine: cleaning and dressing a wound. Results showed that students' accuracy with the first aid routine increased after a peer delivered the LBBI instructional package, and maintained after the peer stopped delivering it. This study demonstrates the effectiveness of the LBBI instructional package for teaching first aid safety skills, and extends previous research showing the efficacy of peers in delivering this intervention.

Child-Resistant Packaging for E-Liquid: A Review of US State Legislation.

PubMed

Frey, Leslie T; Tilburg, William C

2016-02-01

A growing number of states have introduced or enacted legislation requiring child-resistant packaging for e-liquid containers; however, these laws involve varying terms, packaging standards, and enforcement provisions, raising concerns about their effectiveness. We evaluated bills against 4 benchmarks: broad product definitions that contemplate future developments in the market, citations to a specific packaging standard, stated penalties for violations, and express grants of authority to a state entity to enforce the packaging requirements. Our findings showed that 3 states meet all 4 benchmarks in their enacted legislation. We encourage states to consider these benchmarks when revising statutes or drafting future legislation.

Child-Resistant Packaging for E-Liquid: A Review of US State Legislation

PubMed Central

Tilburg, William C.

2016-01-01

A growing number of states have introduced or enacted legislation requiring child-resistant packaging for e-liquid containers; however, these laws involve varying terms, packaging standards, and enforcement provisions, raising concerns about their effectiveness. We evaluated bills against 4 benchmarks: broad product definitions that contemplate future developments in the market, citations to a specific packaging standard, stated penalties for violations, and express grants of authority to a state entity to enforce the packaging requirements. Our findings showed that 3 states meet all 4 benchmarks in their enacted legislation. We encourage states to consider these benchmarks when revising statutes or drafting future legislation. PMID:26691114

Structural constraints in the packaging of bluetongue virus genomic segments

PubMed Central

Burkhardt, Christiane; Sung, Po-Yu; Celma, Cristina C.

2014-01-01

The mechanism used by bluetongue virus (BTV) to ensure the sorting and packaging of its 10 genomic segments is still poorly understood. In this study, we investigated the packaging constraints for two BTV genomic segments from two different serotypes. Segment 4 (S4) of BTV serotype 9 was mutated sequentially and packaging of mutant ssRNAs was investigated by two newly developed RNA packaging assay systems, one in vivo and the other in vitro. Modelling of the mutated ssRNA followed by biochemical data analysis suggested that a conformational motif formed by interaction of the 5′ and 3′ ends of the molecule was necessary and sufficient for packaging. A similar structural signal was also identified in S8 of BTV serotype 1. Furthermore, the same conformational analysis of secondary structures for positive-sense ssRNAs was used to generate a chimeric segment that maintained the putative packaging motif but contained unrelated internal sequences. This chimeric segment was packaged successfully, confirming that the motif identified directs the correct packaging of the segment. PMID:24980574

Lenz's Law Magic Trick

NASA Astrophysics Data System (ADS)

Ruiz, Michael J.

2006-02-01

The demonstration of Lenz's law by dropping a powerful magnet down a nonmagnetic metal pipe has become a classic lecture-hall demonstration.1,2 An inexpensive version is packaged as a professional magic trick3 called "Newton's Nightmare." Combining sleight-of-hand with a demonstration of Lenz's law is a surefire way to heighten student interest. The subsequent student discussion motivated by a desire to understand the magic trick can lead to a memorable physics lesson. This paper will discuss Lenz's law magic and review literature that reveals the subtlety of the physics.

A Cross-sectional Study of Midwives' Perspectives Towards their Professional Educational Needs.

PubMed

Abedian, Kobra; Charati, Jamshid Yazdani; Samadaee, Keshvar; Shahhosseini, Zohreh

2014-06-01

Midwives are one of the most important health care providers and meeting their professional educational needs can be effective in maternal and child health promotion. The aim of this study was to investigate the midwives' perspectives towards their educational needs. In this cross-sectional study which was conducted in 2012 in Sari, North of Iran, 223 midwives during a convenience sampling method expressed their educational needs. The instrument of the data collection was a self-administered 64-question researcher- made questionnaire about the participants' educational needs in 10 fields related to midwifery profession. The mean age and employment record of the participants were 33.87±10.49 and 10.09±8.14 years respectively, and the majority (65.02%) of them was employed in the health care centers. Findings showed that the highest score of midwives' educational need was related to need to education about labor and delivery care (75.14±21.13%) which was followed by the need to education about pre marriage counseling (74.04±19.95%) and pre conception counseling (71.33±21.89%). Owing to the emergence of new dimensions of tasks in midwifery practice and due to developing some changes in the educational needs of midwives, it's necessary to implement an updated educational package in order to deliver the recommended standards of care and to increase midwives' participation in continuing education programs.

Packaging Technology Developed for High-Temperature Silicon Carbide Microsystems

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Hunter, Gary W.; Neudeck, Philip G.

2001-01-01

High-temperature electronics and sensors are necessary for harsh-environment space and aeronautical applications, such as sensors and electronics for space missions to the inner solar system, sensors for in situ combustion and emission monitoring, and electronics for combustion control for aeronautical and automotive engines. However, these devices cannot be used until they can be packaged in appropriate forms for specific applications. Suitable packaging technology for operation temperatures up to 500 C and beyond is not commercially available. Thus, the development of a systematic high-temperature packaging technology for SiC-based microsystems is essential for both in situ testing and commercializing high-temperature SiC sensors and electronics. In response to these needs, researchers at Glenn innovatively designed, fabricated, and assembled a new prototype electronic package for high-temperature electronic microsystems using ceramic substrates (aluminum nitride and aluminum oxide) and gold (Au) thick-film metallization. Packaging components include a ceramic packaging frame, thick-film metallization-based interconnection system, and a low electrical resistance SiC die-attachment scheme. Both the materials and fabrication process of the basic packaging components have been tested with an in-house-fabricated SiC semiconductor test chip in an oxidizing environment at temperatures from room temperature to 500 C for more than 1000 hr. These test results set lifetime records for both high-temperature electronic packaging and high-temperature electronic device testing. As required, the thick-film-based interconnection system demonstrated low (2.5 times of the room-temperature resistance of the Au conductor) and stable (decreased 3 percent in 1500 hr of continuous testing) electrical resistance at 500 C in an oxidizing environment. Also as required, the electrical isolation impedance between printed wires that were not electrically joined by a wire bond remained high (greater than 0.4 GW) at 500 C in air. The attached SiC diode demonstrated low (less than 3.8 W/mm2) and relatively consistent dynamic resistance from room temperature to 500 C. These results indicate that the prototype package and the compatible die-attach scheme meet the initial design standards for high-temperature, low-power, and long-term operation. This technology will be further developed and evaluated, especially with more mechanical tests of each packaging element for operation at higher temperatures and longer lifetimes.

Operating Experience and Lessons Learned in the Use of Soft-Sided Packaging for Transportation and Disposal of Low Activity Radioactive Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kapoor, A.; Gordon, S.; Goldston, W.

2013-07-08

This paper describes the operating experience and lessons learned at U.S. Department of Energy (DOE) sites as a result of an evaluation of potential trailer contamination and soft-sided packaging integrity issues related to the disposal of low-level and mixed low-level (LLW/MLLW) radioactive waste shipments. Nearly 4.3 million cubic meters of LLW/MLLW will have been generated and disposed of during fiscal year (FY) 2010 to FY 2015—either at commercial disposal sites or disposal sites owned by DOE. The LLW/MLLW is packaged in several different types of regulatory compliant packaging and transported via highway or rail to disposal sites safely and efficientlymore » in accordance with federal, state, and local regulations and DOE orders. In 1999, DOE supported the development of LLW containers that are more volumetrically efficient, more cost effective, and easier to use as compared to metal or wooden containers that existed at that time. The DOE Idaho National Engineering and Environmental Laboratory (INEEL), working in conjunction with the plastic industry, tested several types of soft-sided waste packaging systems that meet U.S. Department of Transportation requirements for transport of low specific activity and surface contaminated objects. Since then, soft-sided packaging of various capacities have been used successfully by the decontamination and decommissioning (D&D) projects to package, transport, and dispose D&D wastes throughout the DOE complex. The joint team of experts assembled by the Energy Facility Contractors Group from DOE waste generating sites, DOE and commercial waste disposal facilities, and soft-sided packaging suppliers conducted the review of soft-sided packaging operations and transportation of these packages to the disposal sites. As a result of this evaluation, the team developed several recommendations and best practices to prevent or minimize the recurrences of equipment contamination issues and proper use of soft-sided packaging for transport and disposal of waste.« less

Sentinel Wraps: Real-Time Monitoring of Food Contamination by Printing DNAzyme Probes on Food Packaging.

PubMed

Yousefi, Hanie; Ali, M Monsur; Su, Hsuan-Ming; Filipe, Carlos D M; Didar, Tohid F

2018-04-24

Here, we report the development of a transparent, durable, and flexible sensing surface that generates a fluorescence signal in the presence of a specific target bacterium. This material can be used in packaging, and it is capable of monitoring microbial contamination in various types of food products in real time without having to remove the sample or the sensor from the package. The sensor was fabricated by covalently attaching picoliter-sized microarrays of an E. coli-specific RNA-cleaving fluorogenic DNAzyme probe (RFD-EC1) to a thin, flexible, and transparent cyclo-olefin polymer (COP) film. Our experimental results demonstrate that the developed (RFD-EC1)-COP surface is specific, stable for at least 14 days under various pH conditions (pH 3-9), and can detect E. coli in meat and apple juice at concentrations as low as 10 3 CFU/mL. Furthermore, we demonstrate that our sensor is capable of detecting bacteria while still attached to the food package, which eliminates the need to manipulate the sample. The developed biosensors are stable for at least the shelf life of perishable packaged food products and provide a packaging solution for real-time monitoring of pathogens. These sensors hold the potential to make a significant contribution to the ongoing efforts to mitigate the negative public-health-related impacts of food-borne illnesses.

On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications

PubMed Central

Arrieta, Marina Patricia; Samper, María Dolores; Aldas, Miguel; López, Juan

2017-01-01

Poly(lactic acid) (PLA) is the most used biopolymer for food packaging applications. Several strategies have been made to improve PLA properties for extending its applications in the packaging field. Melt blending approaches are gaining considerable interest since they are easy, cost-effective and readily available processing technologies at the industrial level. With a similar melting temperature and high crystallinity, poly(hydroxybutyrate) (PHB) represents a good candidate to blend with PLA. The ability of PHB to act as a nucleating agent for PLA improves its mechanical resistance and barrier performance. With the dual objective to improve PLAPHB processing performance and to obtain stretchable materials, plasticizers are frequently added. Current trends to enhance PLA-PHB miscibility are focused on the development of composite and nanocomposites. PLA-PHB blends are also interesting for the controlled release of active compounds in the development of active packaging systems. This review explains the most relevant processing aspects of PLA-PHB based blends such as the influence of polymers molecular weight, the PLA-PHB composition as well as the thermal stability. It also summarizes the recent developments in PLA-PHB formulations with an emphasis on their performance with interest in the sustainable food packaging field. PLA-PHB blends shows highly promising perspectives for the replacement of traditional petrochemical based polymers currently used for food packaging. PMID:28850102

A Software Development Approach for Computer Assisted Language Learning

ERIC Educational Resources Information Center

Cushion, Steve

2005-01-01

Over the last 5 years we have developed, produced, tested, and evaluated an authoring software package to produce web-based, interactive, audio-enhanced language-learning material. That authoring package has been used to produce language-learning material in French, Spanish, German, Arabic, and Tamil. We are currently working on increasing…

Wolves--Fact and Fiction: Example Performance Package, Minnesota Profile of Learning.

ERIC Educational Resources Information Center

Minnesota State Dept. of Children, Families, and Learning, St. Paul.

Developed by classroom teachers during the development phase of Minnesota's Graduation Standards, these performance packages are made up of locally designed assignments that, taken together, show whether a student has learned and can apply the knowledge and skills related to comprehending literal meaning in reading, viewing and listening…

Development of antioxidant packaging material by applying corn-zein to LLDPE film in combination with phenolic compounds.

PubMed

Park, Hye-Yeon; Kim, Sung-Jin; Kim, Ki Myong; You, Young-Sun; Kim, So Yeon; Han, Jaejoon

2012-10-01

Functional active packaging materials were successfully developed by incorporating antioxidant agents into corn-zein-laminated linear low-density polyethylene (LLDPE) film. The minimum effective concentrations of the active compounds (for example, thymol, carvacrol, eugenol) were determined and these compounds were then laminated into LLDPE films to develop corn-zein-laminated films with antioxidant agents. The release rate of antioxidant agents in gas and liquid media were determined along with the mechanical and water barrier properties of the films containing these compounds. Tensile strength and percentage elongation at break were reduced in the corn-zein-laminated LLDPE films when compared to typical LLDPE film. Furthermore, the ability of the corn-zein-laminated films to repel moisture decreased by approximately 12.2%, but was improved by incorporating hydrophobic antioxidant compounds in the corn-zein layer. Examination of release kinetics in the gas and liquid phases verified that antioxidants were effectively released from the films and inhibited oxidation during testing. Finally, the films were used for fresh ground beef packaging, and effectively inhibited lipid oxidation and had a positive effect on the color stability of beef patties during storage. These results indicate that the developed antioxidant films are a novel active packaging material that can be effectively implemented by the food industry to improve the quality and safety of foods. Zein protein, a by-product of corn processing industry, was laminated into plastic films in combination with natural phenolic compounds to develop antioxidant packaging films. The films demonstrated their efficient release patterns of antioxidant compounds, which are suitable for packaging applications and food protection. © 2012 Institute of Food Technologists®

AOP: An R Package For Sufficient Causal Analysis in Pathway ...

EPA Pesticide Factsheets

Summary: How can I quickly find the key events in a pathway that I need to monitor to predict that a/an beneficial/adverse event/outcome will occur? This is a key question when using signaling pathways for drug/chemical screening in pharma-cology, toxicology and risk assessment. By identifying these sufficient causal key events, we have fewer events to monitor for a pathway, thereby decreasing assay costs and time, while maximizing the value of the information. I have developed the “aop” package which uses backdoor analysis of causal net-works to identify these minimal sets of key events that are suf-ficient for making causal predictions. Availability and Implementation: The source and binary are available online through the Bioconductor project (http://www.bioconductor.org/) as an R package titled “aop”. The R/Bioconductor package runs within the R statistical envi-ronment. The package has functions that can take pathways (as directed graphs) formatted as a Cytoscape JSON file as input, or pathways can be represented as directed graphs us-ing the R/Bioconductor “graph” package. The “aop” package has functions that can perform backdoor analysis to identify the minimal set of key events for making causal predictions.Contact: burgoon.lyle@epa.gov This paper describes an R/Bioconductor package that was developed to facilitate the identification of key events within an AOP that are the minimal set of sufficient key events that need to be tested/monit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwilliams, A. J.; Daugherty, W. L.; Skidmore, T. E.

The 9975 Type B shipping package is used within the DOE complex for shipping special nuclear materials. This package is re-certified annually in accordance with Safety Analysis Report for Packaging (SARP) requirements. The package is also used at the Savannah River Site as part of the long-term storage configuration of special nuclear materials. As such, the packages do not undergo annual recertification during storage, with uncertainty as to how long some of the package components will meet their functional requirements in the storage environment. The packages are currently approved for up to 15 years storage, and work continues to providemore » a technical basis to extend that period. This report describes efforts by the Savannah River National Laboratory (SRNL) to extend the service life estimate of Viton® GLT and GLT-S fluoroelastomer O-rings used in the 9975 shipping package. O-rings of both GLT and GLT-S compositions are undergoing accelerated aging at elevated temperature, and are periodically tested for compression stress relaxation (CSR) behavior. The CSR behavior of O-rings was evaluated at temperatures from 175 to 400 °F. These collective data were used to develop predictive models for extrapolation of CSR behavior to relevant service temperatures (< 156 °F). The predictive model developed from the CSR data conservatively indicates a service life of approximately 37 years for Viton GLT O-rings at the maximum effective service temperature of 156 °F. The estimated service life for Viton GLT-S O-rings is significantly longer.« less