Dynamic Analysis of Spur Gear Transmissions (DANST). PC Version 3.00 User Manual
NASA Technical Reports Server (NTRS)
Oswald, Fred B.; Lin, Hsiang Hsi; Delgado, Irebert R.
1996-01-01
DANST is a FORTRAN computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the static transmission error, dynamic load, tooth bending stress and other properties of spur gears as they are influenced by operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratios ranging from one to three. It was designed to be easy to use and it is extensively documented in several previous reports and by comments in the source code. This report describes installing and using a new PC version of DANST, covers input data requirements and presents examples.
Dynamic Forces in Spur Gears - Measurement, Prediction, and Code Validation
NASA Technical Reports Server (NTRS)
Oswald, Fred B.; Townsend, Dennis P.; Rebbechi, Brian; Lin, Hsiang Hsi
1996-01-01
Measured and computed values for dynamic loads in spur gears were compared to validate a new version of the NASA gear dynamics code DANST-PC. Strain gage data from six gear sets with different tooth profiles were processed to determine the dynamic forces acting between the gear teeth. Results demonstrate that the analysis code successfully simulates the dynamic behavior of the gears. Differences between analysis and experiment were less than 10 percent under most conditions.
Balancing Dynamic Strength of Spur Gears Operated at Extended Center Distance
NASA Technical Reports Server (NTRS)
Lin, Hsiang Hsi; Liou, Chuen-Huei; Oswald, Fred B.; Townsend, Dennis P.
1996-01-01
This paper presents an analytical study on using hob offset to balance the dynamic tooth strength of spur gears operated at a center distance greater than the standard value. This study is an extension of a static study by Mabie and others. The study was limited to the offset values that assure the pinion and gear teeth will neither be undercut nor become pointed. The analysis presented in this paper was performed using DANST-PC, a new version of the NASA gear dynamics code. The operating speed of the transmission influences the amount of hob offset required to equalize the dynamic stresses in the pinion and gear. The optimum hob offset for the pinion was found to vary within a small range as the speed changes. The optimum value is generally greater than the optimum value found by static procedures. For gears that must operate over a wide range of speeds, an average offset value may be used.
Effect of contact ratio on spur gear dynamic load
NASA Technical Reports Server (NTRS)
Liou, Chuen-Huei; Lin, Hsiang Hsi; Oswald, Fred B.; Townsend, Dennis P.
1992-01-01
A computer simulation is presented which shows how the gear contact ratio affects the dynamic load on a spur gear transmission. The contact ratio can be affected by the tooth addendum, the pressure angle, the tooth size (diametral pitch), and the center distance. The analysis presented was performed using the NASA gear dynamics code, DANST. In the analysis, the contact ratio was varied over the range 1.20 to 2.40 by changing the length of the tooth addendum. In order to simplify the analysis, other parameters related to contact ratio were held constant. The contact ratio was found to have a significant influence on gear dynamics. Over a wide range of operating speeds, a contact ratio close to 2.0 minimized dynamic load. For low contact ratio gears (contact ratio less than 2.0), increasing the contact ratio reduced the gear dynamic load. For high contact ratio gears (contact ratio = or greater than 2.0), the selection of contact ratio should take into consideration the intended operating speeds. In general, high contact ratio gears minimized dynamic load better than low contact ratio gears.
Dávila-Romero, C; Hernández-Mocholí, M A; García-Hermoso, A
2015-03-01
This study is divided into three sequential stages: identification of fitness and game performance profiles (individual player performance), an assessment of the relationship between these profiles, and an assessment of the relationship between individual player profiles and team performance during play (in championship performance). The overall study sample comprised 525 (19 teams) female volleyball players aged 12-16 years and a subsample (N.=43) used to examine study aims one and two was selected from overall sample. Anthropometric, fitness and individual player performance (actual game) data were collected in the subsample. These data were analyzed through clustering methods, ANOVA and independence chi-square test. Then, we investigated whether the proportion of players with the highest individual player performance profile might predict a team's results in the championship. Cluster analysis identified three volleyball fitness profiles (high, medium, and low) and two individual player performance profiles (high and low). The results showed a relationship between both types of profile (fitness and individual player performance). Then, linear regression revealed a moderate relationship between the number of players with a high volleyball fitness profile and a team's results in the championship (R2=0.23). The current study findings may enable coaches and trainers to manage training programs more efficiently in order to obtain tailor-made training, identify volleyball-specific physical fitness training requirements and reach better results during competitions.
COLLINS, BRIAN A.; O'CONNOR, ERIN E.; SUÁREZ-OROZCO, CAROLA; NIETO-CASTAÑON, ALFONSO; TOPPELBERG, CLAUDIO O.
2013-01-01
Dual language children enter school with varying levels of proficiencies in their first and second language. This study of Latino children of immigrants (N = 163) analyzes their dual language profiles at kindergarten and second grade, derived from the direct assessment of Spanish and English proficiencies (Woodcock Language Proficiency Batteries–Revised). Children were grouped based on the similarity of language profiles (competent profiles, such as dual proficient, Spanish proficient, and English proficient; and low-performing profiles, including borderline proficient and limited proficient). At kindergarten, the majority of children (63%) demonstrated a low-performing profile; by second grade, however, the majority of children (64%) had competent profiles. Change and stability of language profiles over time of individual children were then analyzed. Of concern, are children who continued to demonstrate a low-performing, high-risk profile. Factors in the linguistic environments at school and home, as well as other family and child factors associated with dual language profiles and change/stability over time were examined, with a particular focus on the persistently low-performing profile groups. PMID:24825925
Kettelhut, Valeriya V; Nayar, Preethy
2013-06-01
CONTEXT-Transplant center performance profiling provides important information for various concerned parties. Comparing a transplant center's performance against the performance of the best-in-class centers may help in understanding the performance thresholds for the underperforming centers. OBJECTIVES-(1) To identify and describe "Centers for Medicare and Medicaid Services (CMS)-red-flag" performers and the "best-in-class" performers and (2) to examine the relationships between a center's performance profile and outcomes such as 1-year observed mortality, 1-month observed mortality, 1-year risk-adjusted mortality, and volume. METHODS-The data for analysis was obtained from the published reports on the Scientific Registry for Transplant Recipients (SRTR) website for adult liver transplant programs compiled for the rolling 2 1/2-year cohorts of patients and included 7 cohorts of liver transplant recipients in the study from January through July 1, 2002, through December 31, 2010. We defined 4 performance profiles: CMS-red-flag, lower-than-expected, higher-than-expected, and best-in-class performers. RESULTS-The current SRTR methods classify approximately 7% of the adult liver centers as CMS-red-flag performers and 6% of the centers as best-in-class performers in every reported period. Neither of the low-volume centers (<30 liver transplants per 2 1/2-year cohort) was profiled as CMS-red-flag until the 2010 reporting period. The transplant center's profile was significantly associated with the 1-year and 1-month observed mortality rates in every reported cohort (P< .001). CONCLUSION-The CMS-red-flag profile can be characterized with the following: (1) the highest observed 1-year mortality, (2) the highest observed 1-month mortality, (3) a very large difference between the observed and adjusted mortality rates, and (4) the center volume greater than 30 liver transplants per 2 1/2-year cohort. The SRTR methods are not sensitive for performance profiling in the centers that perform fewer than 30 orthotopic liver transplants per 2 1/2-year cohort.
DOT National Transportation Integrated Search
1992-03-01
This report provides aircraft takeoff and landing profiles, aircraft aerodynamic performance coefficients and engine performance coefficients for the aircraft data base (Database 9) in the Integrated Noise Model (INM) computer program. Flight profile...
Method and system for SCR optimization
Lefebvre, Wesley Curt [Boston, MA; Kohn, Daniel W [Cambridge, MA
2009-03-10
Methods and systems are provided for controlling SCR performance in a boiler. The boiler includes one or more generally cross sectional areas. Each cross sectional area can be characterized by one or more profiles of one or more conditions affecting SCR performance and be associated with one or more adjustable desired profiles of the one or more conditions during the operation of the boiler. The performance of the boiler can be characterized by boiler performance parameters. A system in accordance with one or more embodiments of the invention can include a controller input for receiving a performance goal for the boiler corresponding to at least one of the boiler performance parameters and for receiving data values corresponding to boiler control variables and to the boiler performance parameters. The boiler control variables include one or more current profiles of the one or more conditions. The system also includes a system model that relates one or more profiles of the one or more conditions in the boiler to the boiler performance parameters. The system also includes an indirect controller that determines one or more desired profiles of the one or more conditions to satisfy the performance goal for the boiler. The indirect controller uses the system model, the received data values and the received performance goal to determine the one or more desired profiles of the one or more conditions. The system model also includes a controller output that outputs the one or more desired profiles of the one or more conditions.
Profiles of mental health care professionals based on work role performance.
Markon, Marie-Pierre; Bamvita, Jean-Marie; Chiocchio, François; Fleury, Marie-Josée
2017-12-01
The worldwide burden of mental disorders is considerable, and on the rise, putting pressure on health care systems. Current reforms aim to improve the efficiency of mental health care systems by increasing service integration in communities and strengthening primary mental health care. In this context, mental health care professionals (MHPs) are increasingly required to work on interdisciplinary teams in a variety of settings. Little is known, however, about the profiles of MHPs in relation to their perceived work role performance. MHPs in Quebec (N = 315) from four local service networks completed a self-administered questionnaire eliciting information on individual and team characteristics, as well as team processes and states. Profiles of MHPs were created using a two-step cluster analysis. Five profiles were generated. MHPs belonging to profiles labelled senior medical outpatient specialized care MHPs and senior psychosocial outpatient specialized care MHPs perceived themselves as more performing than MHPs in other profiles. The profile labelled low-collaborators was significantly less performing than all other groups. Two other profiles were identified, positioned between the aforementioned groups in terms of the perceived performance of MHPs: the junior primary care MHPs and the diversified specialized care MHPs. Seniority within the team, delivering specialized type of care, and positive team processes were all features associated with profiles where perceived work performance was high. Overall, this study supports the case for initiatives aimed at improving stability and interdisciplinary collaboration in health teams, especially in primary care.
Long-term pavement performance program manual for profile measurements and processing
DOT National Transportation Integrated Search
2008-11-01
This manual describes operational procedures for measuring longitudinal pavement profiles for the Long-Term Pavement Performance (LTPP) Program using the International Cybernetics Corporation (ICC) road profiler, Face Company Dipstick, and the rod an...
Widlund, Anna; Tuominen, Heta; Korhonen, Johan
2018-01-01
It has been suggested that both performance and academic well-being play a role in adolescent students’ educational attainment and school dropout. In this study, we therefore examined, first, what kinds of academic well-being (i.e., school burnout, schoolwork engagement, and mathematics self-concept) and mathematics performance profiles can be identified among lower secondary school students (Ngrade 7 = 583, Ngrade 9 = 497); second, how stable these profiles are across one school year during the seventh and ninth grades; and, third, how students with different academic well-being and mathematics performance profiles differ with respect to their educational aspirations. By means of latent profile analyses, three groups of students in seventh grade: thriving (34%), average (51%), and negative academic well-being (15%) and four groups of students in ninth grade: thriving (25%), average (50%), negative academic well-being (18%), and low-performing (7%) with distinct well-being and mathematics performance profiles were identified. Configural frequency analyses revealed that the profiles were relatively stable across one school year; 60% of the students displayed identical profiles over time. The thriving students reported the highest educational aspirations compared to the other groups. In addition, the low-performing students in the ninth grade had the lowest educational aspirations just before the transition to upper secondary school. Practical implications as well as directions for future research are discussed. PMID:29593603
Widlund, Anna; Tuominen, Heta; Korhonen, Johan
2018-01-01
It has been suggested that both performance and academic well-being play a role in adolescent students' educational attainment and school dropout. In this study, we therefore examined, first, what kinds of academic well-being (i.e., school burnout, schoolwork engagement, and mathematics self-concept) and mathematics performance profiles can be identified among lower secondary school students ( N grade 7 = 583, N grade 9 = 497); second, how stable these profiles are across one school year during the seventh and ninth grades; and, third, how students with different academic well-being and mathematics performance profiles differ with respect to their educational aspirations. By means of latent profile analyses, three groups of students in seventh grade: thriving (34%), average (51%), and negative academic well-being (15%) and four groups of students in ninth grade: thriving (25%), average (50%), negative academic well-being (18%), and low-performing (7%) with distinct well-being and mathematics performance profiles were identified. Configural frequency analyses revealed that the profiles were relatively stable across one school year; 60% of the students displayed identical profiles over time. The thriving students reported the highest educational aspirations compared to the other groups. In addition, the low-performing students in the ninth grade had the lowest educational aspirations just before the transition to upper secondary school. Practical implications as well as directions for future research are discussed.
2016-01-01
temporal changes in urinary metabolite profiles mirrored cognitive performance during continuous wakefulness. Additionally , subjects identified by...profiles mirrored cognitive performance during continuous wakefulness. Additionally , subjects identified by cognitive assessments as having a high...field studies and would have little useful application in occupational or military operational environments. Addition - ally, their usefulness is
Houwen, Suzanne; Kamphorst, Erica; van der Veer, Gerda; Cantell, Marja
2018-04-30
A relationship between motor performance and cognitive functioning is increasingly being recognized. Yet, little is known about the precise nature of the relationship between both domains, especially in early childhood. To identify distinct constellations of motor performance, executive functioning (EF), and verbal ability in preschool aged children; and to explore how individual and contextual variables are related to profile membership. The sample consisted of 119 3- to 4-year old children (62 boys; 52%). The home based assessments consisted of a standardized motor test (Movement Assessment Battery for Children - 2), five performance-based EF tasks measuring inhibition and working memory, and the Receptive Vocabulary subtest from the Wechsler Preschool and Primary Scale of Intelligence Third Edition. Parents filled out the Behavior Rating Inventory of Executive Function - Preschool version. Latent profile analysis (LPA) was used to delineate profiles of motor performance, EF, and verbal ability. Chi-square statistics and multinomial logistic regression analysis were used to examine whether profile membership was predicted by age, gender, risk of motor coordination difficulties, ADHD symptomatology, language problems, and socioeconomic status (SES). LPA yielded three profiles with qualitatively distinct response patterns of motor performance, EF, and verbal ability. Quantitatively, the profiles showed most pronounced differences with regard to parent ratings and performance-based tests of EF, as well as verbal ability. Risk of motor coordination difficulties and ADHD symptomatology were associated with profile membership, whereas age, gender, language problems, and SES were not. Our results indicate that there are distinct subpopulations of children who show differential relations with regard to motor performance, EF, and verbal ability. The fact that we found both quantitative as well as qualitative differences between the three patterns of profiles underscores the need for a person-centered approach with a focus on patterns of individual characteristics. Copyright © 2018 Elsevier Ltd. All rights reserved.
Update of aircraft profile data for the Integrated Noise Model computer program, vol 1: final report
DOT National Transportation Integrated Search
1992-03-01
This report provides aircraft takeoff and landing profiles, aircraft aerodynamic performance coefficients and engine performance coefficients for the aircraft data base (Database 9) in the Integrated Noise Model (INM) computer program. Flight profile...
Personality Profiles of Effective Leadership Performance in Assessment Centers.
Parr, Alissa D; Lanza, Stephanie T; Bernthal, Paul
2016-01-01
Most research examining the relationship between effective leadership and personality has focused on individual personality traits. However, profiles of personality traits more fully describe individuals, and these profiles may be important as they relate to leadership. This study used latent class analysis to examine how personality traits combine and interact to form subpopulations of leaders, and how these subpopulations relate to performance criteria. Using a sample of 2,461 executive-level leaders, six personality profiles were identified: Unpredictable Leaders with Low Diligence (7.3%); Conscientious, Backend Leaders (3.6%); Unpredictable Leaders (8.6%); Creative Communicators (20.8%); Power Players (32.4%); and Protocol Followers (27.1%). One profile performed well on all criteria in an assessment center; remaining profiles exhibited strengths and weaknesses across criteria. Implications and future directions for research are highlighted.
Long term pavement performance directive : annual profiler-dipstick comparisons
DOT National Transportation Integrated Search
1996-11-25
The objective of this directive is to initiate a formal program for Profiler - Dipstick comparisons. These comparison tests should be performed as a minimum, on an annual basis, or within 90 days after major repairs to any of the LTPP profile measure...
Devine, Amy; Hill, Francesca; Szűcs, Dénes
2017-01-01
Introduction Individuals with high levels of mathematics anxiety are more likely to have other forms of anxiety, such as general anxiety and test anxiety, and tend to have some math performance decrement compared to those with low math anxiety. However, it is unclear how the anxiety forms cluster in individuals, or how the presence of other anxiety forms influences the relationship between math anxiety and math performance. Method We measured math anxiety, test anxiety, general anxiety and mathematics and reading performance in 1720 UK students (year 4, aged 8–9, and years 7 and 8, aged 11–13). We conducted latent profile analysis of students’ anxiety scores in order to examine the developmental change in anxiety profiles, the demographics of each anxiety profile and the relationship between profiles and academic performance. Results Anxiety profiles appeared to change in specificity between the two age groups studied. Only in the older students did clusters emerge with specifically elevated general anxiety or academic anxiety (test and math anxiety). Our findings suggest that boys are slightly more likely than girls to have elevated academic anxieties relative to their general anxiety. Year 7/8 students with specifically academic anxiety show lower academic performance than those who also have elevated general anxiety. Conclusions There may be a developmental change in the specificity of anxiety and gender seems to play a strong role in determining one’s anxiety profile. The anxiety profiles present in our year 7/8 sample, and their relationships with math performance, suggest a bidirectional relationship between math anxiety and math performance. PMID:28350857
Carey, Emma; Devine, Amy; Hill, Francesca; Szűcs, Dénes
2017-01-01
Individuals with high levels of mathematics anxiety are more likely to have other forms of anxiety, such as general anxiety and test anxiety, and tend to have some math performance decrement compared to those with low math anxiety. However, it is unclear how the anxiety forms cluster in individuals, or how the presence of other anxiety forms influences the relationship between math anxiety and math performance. We measured math anxiety, test anxiety, general anxiety and mathematics and reading performance in 1720 UK students (year 4, aged 8-9, and years 7 and 8, aged 11-13). We conducted latent profile analysis of students' anxiety scores in order to examine the developmental change in anxiety profiles, the demographics of each anxiety profile and the relationship between profiles and academic performance. Anxiety profiles appeared to change in specificity between the two age groups studied. Only in the older students did clusters emerge with specifically elevated general anxiety or academic anxiety (test and math anxiety). Our findings suggest that boys are slightly more likely than girls to have elevated academic anxieties relative to their general anxiety. Year 7/8 students with specifically academic anxiety show lower academic performance than those who also have elevated general anxiety. There may be a developmental change in the specificity of anxiety and gender seems to play a strong role in determining one's anxiety profile. The anxiety profiles present in our year 7/8 sample, and their relationships with math performance, suggest a bidirectional relationship between math anxiety and math performance.
Physical Profiling Performance of Air Force Primary Care Providers
2017-08-09
AFRL-SA-WP-TR-2017-0014 Physical Profiling Performance of Air Force Primary Care Providers Anthony P. Tvaryanas1; William P...COVERED (From – To) September 2016 – January 2017 4. TITLE AND SUBTITLE Physical Profiling Performance of Air Force Primary Care Providers...encounter with their primary care team. An independent medical standards subject matter expert (SME) reviewed encounters in the electronic health record
Frndak, Seth E; Smerbeck, Audrey M; Irwin, Lauren N; Drake, Allison S; Kordovski, Victoria M; Kunker, Katrina A; Khan, Anjum L; Benedict, Ralph H B
2016-10-01
We endeavored to clarify how distinct co-occurring symptoms relate to the presence of negative work events in employed multiple sclerosis (MS) patients. Latent profile analysis (LPA) was utilized to elucidate common disability patterns by isolating patient subpopulations. Samples of 272 employed MS patients and 209 healthy controls (HC) were administered neuroperformance tests of ambulation, hand dexterity, processing speed, and memory. Regression-based norms were created from the HC sample. LPA identified latent profiles using the regression-based z-scores. Finally, multinomial logistic regression tested for negative work event differences among the latent profiles. Four profiles were identified via LPA: a common profile (55%) characterized by slightly below average performance in all domains, a broadly low-performing profile (18%), a poor motor abilities profile with average cognition (17%), and a generally high-functioning profile (9%). Multinomial regression analysis revealed that the uniformly low-performing profile demonstrated a higher likelihood of reported negative work events. Employed MS patients with co-occurring motor, memory and processing speed impairments were most likely to report a negative work event, classifying them as uniquely at risk for job loss.
Personality Profiles of Effective Leadership Performance in Assessment Centers
Parr, Alissa D.; Lanza, Stephanie T.; Bernthal, Paul
2016-01-01
Most research examining the relationship between effective leadership and personality has focused on individual personality traits. However, profiles of personality traits more fully describe individuals, and these profiles may be important as they relate to leadership. This study used latent class analysis to examine how personality traits combine and interact to form subpopulations of leaders, and how these subpopulations relate to performance criteria. Using a sample of 2,461 executive-level leaders, six personality profiles were identified: Unpredictable Leaders with Low Diligence (7.3%); Conscientious, Backend Leaders (3.6%); Unpredictable Leaders (8.6%); Creative Communicators (20.8%); Power Players (32.4%); and Protocol Followers (27.1%). One profile performed well on all criteria in an assessment center; remaining profiles exhibited strengths and weaknesses across criteria. Implications and future directions for research are highlighted. PMID:27746587
DOT National Transportation Integrated Search
2004-09-01
This report profiles the motor carrier industry and its significant operating segments. It is one of a series of reports analyzing various aspects of the motor carrier industry. Other reports in the series focus on the safety performance of the indus...
Self-Protection Profiles of Worth and Academic Goals in University Students
ERIC Educational Resources Information Center
Ferradás, María del Mar; Freire, Carlos; Núñez, José Carlos
2017-01-01
This work analyzes the possible existence of self-protection profiles based on a combination of self-handicapping (behavioral and claimed) strategies and defensive pessimism in university students. Similarly, the relationship between these profiles and academic goals (learning, performance-approach, performance-avoidance, and work-avoidance) is…
NASA Astrophysics Data System (ADS)
Yarovyi, Andrii A.; Timchenko, Leonid I.; Kozhemiako, Volodymyr P.; Kokriatskaia, Nataliya I.; Hamdi, Rami R.; Savchuk, Tamara O.; Kulyk, Oleksandr O.; Surtel, Wojciech; Amirgaliyev, Yedilkhan; Kashaganova, Gulzhan
2017-08-01
The paper deals with a problem of insufficient productivity of existing computer means for large image processing, which do not meet modern requirements posed by resource-intensive computing tasks of laser beam profiling. The research concentrated on one of the profiling problems, namely, real-time processing of spot images of the laser beam profile. Development of a theory of parallel-hierarchic transformation allowed to produce models for high-performance parallel-hierarchical processes, as well as algorithms and software for their implementation based on the GPU-oriented architecture using GPGPU technologies. The analyzed performance of suggested computerized tools for processing and classification of laser beam profile images allows to perform real-time processing of dynamic images of various sizes.
NASA Astrophysics Data System (ADS)
Fang, L.
2014-12-01
The analysis in the impact of transition zone on the optical performance of human eye after laser refractive surgery is important for improving visual correction technology. By designing the ablation profiles of aspheric transition zone and creating the ablation profile for conventional refractive surgery in optical zone, the influence of aspheric transition zone on residual aberrations was studied. The results indicated that the ablation profiles of transition zone had a significant influence on the residual wavefront aberrations. For a hyperopia correction, the profile #9 shows a larger induced coma and spherical aberration when the translation of the centre of pupil remains constant. However, for a myopia astigmatism correction, the induced coma and spherical aberration in profile #1 shows relatively larger RMS values than those in other profiles. Therefore, the residual higher order aberrations may be decreased by optimizing ablation profiles of transition zone, but they cannot be eliminated. In order to achieve the best visual performance, the design of ablation pattern of transition zone played a crucial role.
The Impact of a Performance Profiling Intervention on Athletes' Intrinsic Motivation
ERIC Educational Resources Information Center
Weston, Neil J. V.; Greenlees, Iain A.; Thelwell, Richard C.
2011-01-01
Originally developed by Butler (1989) with the Great Britain Olympic boxing team, performance profiling is an assessment tool primarily used by sport psychologists to enhance athlete awareness. The completed profile provides the athlete, the coach, and psychologist with a visual representation of the athlete's perception of his or her performance…
ERIC Educational Resources Information Center
Cohen, Alexander B.; Tenenbaum, Gershon; English, R. William
2006-01-01
A multiple case study investigation is reported in which emotions and performance were assessed within the probabilistic individual zone of optimal functioning (IZOF) model (Kamata, Tenenbaum, & Hanin, 2002) to develop idiosyncratic emotion-performance profiles. These profiles were incorporated into a psychological skills training (PST)…
Ramírez-Rivera, Emmanuel de Jesús; Díaz-Rivera, Pablo; Guadalupe Ramón-Canul, Lorena; Juárez-Barrientos, José Manuel; Rodríguez-Miranda, Jesús; Herman-Lara, Erasmo; Prinyawiwatkul, Witoon; Herrera-Corredor, José Andrés
2018-07-01
The aim of this research was to compare the performance and sensory profiling of a panel of artisanal cheese producers against a trained panel and their relationship to consumer liking (external preference mapping). Performance was analyzed statistically at an individual level using the Fisher's test (F) for discrimination, the mean square error for repeatability, and Manhattan plots for visualizing the intra-panel homogeneity. At group level, performance was evaluated using ANOVA. External preference mapping technique was applied to determine the efficiency of each sensory profile. Results showed that the producers panel was discriminant and repetitive with a performance similar to that of the trained panel. Manhattan plots showed that the performance of artisanal cheese producers was more homogeneous than trained panelists. The correlation between sensory profiles (Rv = 0.95) demonstrated similarities in the generation and use of sensory profiles. The external preference maps generated individually with the profiles of each panel were also similar. Recruiting individuals familiar with the production of artisanal cheeses as panelists is a viable strategy for sensory characterization of artisanal cheeses within their context of origin because their results were similar to those from the trained panel and can be correlated with consumer liking data. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Molsberry, Samantha A; Cheng, Yu; Kingsley, Lawrence; Jacobson, Lisa; Levine, Andrew J; Martin, Eileen; Miller, Eric N; Munro, Cynthia A; Ragin, Ann; Sacktor, Ned; Becker, James T
2018-05-11
Mild forms of HIV-associated neurocognitive disorder (HAND) remain prevalent in the combination anti-retroviral therapy (cART) era. This study's objective was to identify neuropsychological subgroups within the Multicenter AIDS Cohort Study (MACS) based on the participant-based latent structure of cognitive function and to identify factors associated with subgroups. The MACS is a four-site longitudinal study of the natural and treated history of HIV disease among gay and bisexual men. Using neuropsychological domain scores we used a cluster variable selection algorithm to identify the optimal subset of domains with cluster information. Latent profile analysis was applied using scores from identified domains. Exploratory and post-hoc analyses were conducted to identify factors associated with cluster membership and the drivers of the observed associations. Cluster variable selection identified all domains as containing cluster information except for Working Memory. A three-profile solution produced the best fit for the data. Profile 1 performed below average on all domains, Profile 2 performed average on executive functioning, motor, and speed and below average on learning and memory, Profile 3 performed at or above average across all domains. Several demographic, cognitive, and social factors were associated with profile membership; these associations were driven by differences between Profile 1 and the other profiles. There is an identifiable pattern of neuropsychological performance among MACS members determined by all domains except Working Memory. Neither HIV nor HIV-related biomarkers were related with cluster membership, consistent with other findings that cognitive performance patterns do not map directly onto HIV serostatus.
Repp, B H
1999-03-01
Patterns of expressive dynamics were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. The grand average pattern (or dynamic profile) was representative of many performances and highly similar to the average dynamic profile of a group of advanced student performances, which suggests a widely shared central norm of expressive dynamics. The individual dynamic profiles were subjected to principal components analysis, which yielded Varimax-rotated components, each representing a different, nonstandard dynamic profile associated with a small subset of performances. Most performances had dynamic patterns resembling a mixture of several components, and no clustering of of performances into distinct groups was apparent. Some weak relationships of dynamic profiles with sociocultural variables were found, most notably a tendency of female pianists to exhibit a greater dynamic range in the melody. Within the melody, there were no significant relationships between expressive timing [Repp, J. Acoust. Soc. Am. 104, 1085-1100 (1998)] and expressive dynamics. These two important dimensions seemed to be controlled independently at this local level and thus offer the artist many degrees of freedom in giving a melody expressive shape.
DOT National Transportation Integrated Search
1992-03-01
This report provides aircraft takeoff and landing profiles, : aircraft aerodynamic performance coefficients and engine : performance coefficients for the aircraft data base : (Database 9) in the Integrated Noise Model (INM) computer : program. Flight...
NASA Astrophysics Data System (ADS)
Maljaars, E.; Felici, F.; Blanken, T. C.; Galperti, C.; Sauter, O.; de Baar, M. R.; Carpanese, F.; Goodman, T. P.; Kim, D.; Kim, S. H.; Kong, M.; Mavkov, B.; Merle, A.; Moret, J. M.; Nouailletas, R.; Scheffer, M.; Teplukhina, A. A.; Vu, N. M. T.; The EUROfusion MST1-team; The TCV-team
2017-12-01
The successful performance of a model predictive profile controller is demonstrated in simulations and experiments on the TCV tokamak, employing a profile controller test environment. Stable high-performance tokamak operation in hybrid and advanced plasma scenarios requires control over the safety factor profile (q-profile) and kinetic plasma parameters such as the plasma beta. This demands to establish reliable profile control routines in presently operational tokamaks. We present a model predictive profile controller that controls the q-profile and plasma beta using power requests to two clusters of gyrotrons and the plasma current request. The performance of the controller is analyzed in both simulation and TCV L-mode discharges where successful tracking of the estimated inverse q-profile as well as plasma beta is demonstrated under uncertain plasma conditions and the presence of disturbances. The controller exploits the knowledge of the time-varying actuator limits in the actuator input calculation itself such that fast transitions between targets are achieved without overshoot. A software environment is employed to prepare and test this and three other profile controllers in parallel in simulations and experiments on TCV. This set of tools includes the rapid plasma transport simulator RAPTOR and various algorithms to reconstruct the plasma equilibrium and plasma profiles by merging the available measurements with model-based predictions. In this work the estimated q-profile is merely based on RAPTOR model predictions due to the absence of internal current density measurements in TCV. These results encourage to further exploit model predictive profile control in experiments on TCV and other (future) tokamaks.
Single-cell genomic profiling of acute myeloid leukemia for clinical use: A pilot study
Yan, Benedict; Hu, Yongli; Ban, Kenneth H.K.; Tiang, Zenia; Ng, Christopher; Lee, Joanne; Tan, Wilson; Chiu, Lily; Tan, Tin Wee; Seah, Elaine; Ng, Chin Hin; Chng, Wee-Joo; Foo, Roger
2017-01-01
Although bulk high-throughput genomic profiling studies have led to a significant increase in the understanding of cancer biology, there is increasing awareness that bulk profiling approaches do not completely elucidate tumor heterogeneity. Single-cell genomic profiling enables the distinction of tumor heterogeneity, and may improve clinical diagnosis through the identification and characterization of putative subclonal populations. In the present study, the challenges associated with a single-cell genomics profiling workflow for clinical diagnostics were investigated. Single-cell RNA-sequencing (RNA-seq) was performed on 20 cells from an acute myeloid leukemia bone marrow sample. Putative blasts were identified based on their gene expression profiles and principal component analysis was performed to identify outlier cells. Variant calling was performed on the single-cell RNA-seq data. The present pilot study demonstrates a proof of concept for clinical single-cell genomic profiling. The recognized limitations include significant stochastic RNA loss and the relatively low throughput of the current proposed platform. Although the results of the present study are promising, further technological advances and protocol optimization are necessary for single-cell genomic profiling to be clinically viable. PMID:28454300
DOT National Transportation Integrated Search
2005-09-01
The Long-Term Pavement Performance (LTPP) program was designed as a 20-year study of pavement performance. A major data collection effort at LTPP test sections is the collection of longitudinal profile data using inertial profilers. Three types of in...
Said, Heather M; Gupta, Shweta; Vricella, Laura K; Wand, Katy; Nguyen, Thinh; Gross, Gilad
2017-10-01
The objective of this study is to determine whether ambient light serves as a fetal stimulus to decrease the amount of time needed to complete a biophysical profile. This is a randomized controlled trial of singleton gestations undergoing a biophysical profile. Patients were randomized to either ambient light or a darkened room. The primary outcome was the time needed to complete the biophysical profile. Secondary outcomes included total and individual component biophysical profile scores and scores less than 8. A subgroup analysis of different maternal body mass indices was also performed. 357 biophysical profile studies were analyzed. 182 studies were performed with ambient light and 175 were performed in a darkened room. There was no difference in the median time needed to complete the biophysical profile based on exposure to ambient light (6.1min in darkened room versus 6.6min with ambient light; P=0.73). No difference was found in total or individual component biophysical profile scores. Subgroup analysis by maternal body mass index did not demonstrate shorter study times with ambient light exposure in women who were normal weight, overweight or obese. Ambient light exposure did not decrease the time needed to complete the biophysical profile. There was no evidence that ambient light altered fetal behavior observed during the biophysical profile. Copyright © 2017 Elsevier B.V. All rights reserved.
Driver behavior profiling: An investigation with different smartphone sensors and machine learning
Ferreira, Jair; Carvalho, Eduardo; Ferreira, Bruno V.; de Souza, Cleidson; Suhara, Yoshihiko; Pentland, Alex
2017-01-01
Driver behavior impacts traffic safety, fuel/energy consumption and gas emissions. Driver behavior profiling tries to understand and positively impact driver behavior. Usually driver behavior profiling tasks involve automated collection of driving data and application of computer models to generate a classification that characterizes the driver aggressiveness profile. Different sensors and classification methods have been employed in this task, however, low-cost solutions and high performance are still research targets. This paper presents an investigation with different Android smartphone sensors, and classification algorithms in order to assess which sensor/method assembly enables classification with higher performance. The results show that specific combinations of sensors and intelligent methods allow classification performance improvement. PMID:28394925
Anchorage School District Profile of Performance, 1998-1999. Assessment and Evaluation Report.
ERIC Educational Resources Information Center
Fenton, Ray
The "Profile of Performance" is the Anchorage School District, Alaska, report card to the School Board and community on academic achievement. Part 1 of the report provides a summary of performance across the entire district on a variety of indicators of achievement. It includes an overview of district performance and an examination of…
ERIC Educational Resources Information Center
Anchorage School District, AK.
This profile is the report card of the Anchorage, Alaska, School District on the academic achievement of Anchorage students. Part 1 provides a summary of performance across the entire district on a variety of important indicators of success. Part 2, published separately, profiles each of the district's schools. Part 1 contains an overview of the…
Chu, Tsz Lun Alan; Zhang, Tao; Hung, Tsung-Min
2018-06-27
Research has suggested the need to use a person-centred approach to examine multidimensionality of motivation. Guided by self-determination theory (Deci & Ryan, 1985), the primary aim of the present study was to examine the motivational profiles in table tennis players and their composition by gender, country, training status, and competition levels (from recreational to international). The secondary aim was to examine the differences in performance anxiety and subjective vitality across the motivational profiles. Participants were 281 table tennis players from multiple countries, mostly the U.S. and China. Hierarchical and nonhierarchical cluster analyses were conducted and showed three motivational profiles with distinct quantity and quality: "low", "controlled", and "self-determined". Chi-square tests of independence demonstrated significant differences in their cluster membership by country, formal training with a coach, and competition levels, but not gender. MANCOVA results indicated differences in performance anxiety and subjective vitality across the motivational profiles, in which the controlled profile had the greatest anxiety symptoms. These differences are attributed to the quality over quantity of motivation, which have meaningful implications for table tennis coaches and sport psychology consultants to diagnose and intervene with players in order to reduce their performance anxiety and improve their well-being.
Scalability Analysis of Gleipnir: A Memory Tracing and Profiling Tool, on Titan
DOE Office of Scientific and Technical Information (OSTI.GOV)
Janjusic, Tommy; Kartsaklis, Christos; Wang, Dali
2013-01-01
Application performance is hindered by a variety of factors but most notably driven by the well know CPU-memory speed gap (also known as the memory wall). Understanding application s memory behavior is key if we are trying to optimize performance. Understanding application performance properties is facilitated with various performance profiling tools. The scope of profiling tools varies in complexity, ease of deployment, profiling performance, and the detail of profiled information. Specifically, using profiling tools for performance analysis is a common task when optimizing and understanding scientific applications on complex and large scale systems such as Cray s XK7. This papermore » describes the performance characteristics of using Gleipnir, a memory tracing tool, on the Titan Cray XK7 system when instrumenting large applications such as the Community Earth System Model. Gleipnir is a memory tracing tool built as a plug-in tool for the Valgrind instrumentation framework. The goal of Gleipnir is to provide fine-grained trace information. The generated traces are a stream of executed memory transactions mapped to internal structures per process, thread, function, and finally the data structure or variable. Our focus was to expose tool performance characteristics when using Gleipnir with a combination of an external tools such as a cache simulator, Gl CSim, to characterize the tool s overall performance. In this paper we describe our experience with deploying Gleipnir on the Titan Cray XK7 system, report on the tool s ease-of-use, and analyze run-time performance characteristics under various workloads. While all performance aspects are important we mainly focus on I/O characteristics analysis due to the emphasis on the tools output which are trace-files. Moreover, the tool is dependent on the run-time system to provide the necessary infrastructure to expose low level system detail; therefore, we also discuss any theoretical benefits that can be achieved if such modules were present.« less
Vertical electromagnetic profiling (VEMP)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lytle, R.J.
1984-08-01
Vertical seismic profiling (VSP) is based upon reception measurements performed in a borehole with a source near the ground surface. This technology has seen a surge in application and development in the last decade. The analogous concept of vertical electromagnetic profiling (VEMP) consists of reception measurements performed in a borehole with a source near the ground surface. Although the electromagnetic concept has seen some application, this technology has not been as systematically developed and applied as VSP. Vertical electromagnetic profiling provides distinct and complementary data due to sensing different physical parameters than seismic profiling. Certain of the advantages of VEMPmore » are presented. 28 references, 7 figures.« less
Pappas, E; Maris, T G; Papadakis, A; Zacharopoulou, F; Damilakis, J; Papanikolaou, N; Gourtsoyiannis, N
2006-10-01
The aim of this work is to investigate experimentally the detector size effect on narrow beam profile measurements. Polymer gel and magnetic resonance imaging dosimetry was used for this purpose. Profile measurements (Pm(s)) of a 5 mm diameter 6 MV stereotactic beam were performed using polymer gels. Eight measurements of the profile of this narrow beam were performed using correspondingly eight different detector sizes. This was achieved using high spatial resolution (0.25 mm) two-dimensional measurements and eight different signal integration volumes A X A X slice thickness, simulating detectors of different size. "A" ranged from 0.25 to 7.5 mm, representing the detector size. The gel-derived profiles exhibited increased penumbra width with increasing detector size, for sizes >0.5 mm. By extrapolating the gel-derived profiles to zero detector size, the true profile (Pt) of the studied beam was derived. The same polymer gel data were also used to simulate a small-volume ion chamber profile measurement of the same beam, in terms of volume averaging. The comparison between these results and actual corresponding small-volume chamber profile measurements performed in this study, reveal that the penumbra broadening caused by both volume averaging and electron transport alterations (present in actual ion chamber profile measurements) is a lot more intense than that resulted by volume averaging effects alone (present in gel-derived profiles simulating ion chamber profile measurements). Therefore, not only the detector size, but also its composition and tissue equivalency is proved to be an important factor for correct narrow beam profile measurements. Additionally, the convolution kernels related to each detector size and to the air ion chamber were calculated using the corresponding profile measurements (Pm(s)), the gel-derived true profile (Pt), and convolution theory. The response kernels of any desired detector can be derived, allowing the elimination of the errors associated with narrow beam profile measurements.
Two Profiles of the Dutch High Performing Employee
ERIC Educational Resources Information Center
de Waal, A. A.; Oudshoorn, Michella
2015-01-01
Purpose: The purpose of this study is to explore the profile of an ideal employee, to be more precise the behavioral characteristics of the Dutch high-performing employee (HPE). Organizational performance depends for a large part on the commitment of employees. Employees provide their knowledge, skills, experiences and creativity to the…
Computational Fluency Performance Profile of High School Students with Mathematics Disabilities
ERIC Educational Resources Information Center
Calhoon, Mary Beth; Emerson, Robert Wall; Flores, Margaret; Houchins, David E.
2007-01-01
The purpose of this descriptive study was to develop a computational fluency performance profile of 224 high school (Grades 9-12) students with mathematics disabilities (MD). Computational fluency performance was examined by grade-level expectancy (Grades 2-6) and skill area (whole numbers: addition, subtraction, multiplication, division;…
USDA-ARS?s Scientific Manuscript database
Oregano essential oils (OEO) have demonstrated effects on growth performance of broilers. This study was conducted to investigate the effects of Mexican oregano essential oils (MOO) extracts from Lippia berlandieri Schauer and Poliomintha longiflora Gray on performance, blood profiles, carcass vari...
Time-of-day effects on voice range profile performance in young, vocally untrained adult females.
van Mersbergen, M R; Verdolini, K; Titze, I R
1999-12-01
Time-of-day effects on voice range profile performance were investigated in 20 vocally healthy untrained women between the ages of 18 and 35 years. Each subject produced two complete voice range profiles: one in the morning and one in the evening, about 36 hours apart. The order of morning and evening trials was counterbalanced across subjects. Dependent variables were (1) average minimum and average maximum intensity, (2) Voice range profile area and (3) center of gravity (median semitone pitch and median intensity). In this study, the results failed to reveal any clear evidence of time-of-day effects on voice range profile performance, for any of the dependent variables. However, a reliable interaction of time-of-day and trial order was obtained for average minimum intensity. Investigation of other subject populations, in particular trained vocalists or those with laryngeal lesions, is required for any generalization of the results.
Day of Launch Profile Selection for Pad Abort Guidance
NASA Technical Reports Server (NTRS)
Whitley, Ryan J.
2010-01-01
A day of launch selection approach that involves choosing from an array of pitch profiles of varying loft was analyzed with the purpose of reducing the risk of a land landing failure during a pad abort. It was determined that selecting from three pitch profiles can reduce the number of waterline abort performance requirement failures approximately in half without compromising other performance metrics.
Qi, Yujun; Xiong, Wei; Liu, Weiqing; Fang, Hai; Lu, Weidong
2015-01-01
The plate of a pultruded fiber-reinforced polymer or fiber-reinforced plastic (FRP) profile produced via a pultrusion process is likely to undergo local buckling and cracking along the fiber direction under an external load. In this study, we constructed a pultruded glass-fiber-reinforced polymer-light wood composite (PGWC) profile to explore its mechanical performance. A rectangular cross-sectional PGWC profile was fabricated with a paulownia wood core, alkali-free glass fiber filaments, and unsaturated phthalate resin. Three-point bending and short column axial compression tests were conducted. Then, the stress calculation for the PGWC profile in the bending and axial compression tests was performed using the Timoshenko beam theory and the composite component analysis method to derive the flexural and axial compression rigidity of the profile during the elastic stress stage. The flexural capacity for this type of PGWC profile is 3.3-fold the sum of the flexural capacities of the wood core and the glass-fiber-reinforced polymer (GFRP) shell. The equivalent flexural rigidity is 1.5-fold the summed flexural rigidity of the wood core and GFRP shell. The maximum axial compressive bearing capacity for this type of PGWC profile can reach 1.79-fold the sum of those of the wood core and GFRP shell, and its elastic flexural rigidity is 1.2-fold the sum of their rigidities. These results indicate that in PGWC profiles, GFRP and wood materials have a positive combined effect. This study produced a pultruded composite material product with excellent mechanical performance for application in structures that require a large bearing capacity.
Qi, Yujun; Xiong, Wei; Liu, Weiqing; Fang, Hai; Lu, Weidong
2015-01-01
The plate of a pultruded fiber-reinforced polymer or fiber-reinforced plastic (FRP) profile produced via a pultrusion process is likely to undergo local buckling and cracking along the fiber direction under an external load. In this study, we constructed a pultruded glass-fiber-reinforced polymer-light wood composite (PGWC) profile to explore its mechanical performance. A rectangular cross-sectional PGWC profile was fabricated with a paulownia wood core, alkali-free glass fiber filaments, and unsaturated phthalate resin. Three-point bending and short column axial compression tests were conducted. Then, the stress calculation for the PGWC profile in the bending and axial compression tests was performed using the Timoshenko beam theory and the composite component analysis method to derive the flexural and axial compression rigidity of the profile during the elastic stress stage. The flexural capacity for this type of PGWC profile is 3.3-fold the sum of the flexural capacities of the wood core and the glass-fiber-reinforced polymer (GFRP) shell. The equivalent flexural rigidity is 1.5-fold the summed flexural rigidity of the wood core and GFRP shell. The maximum axial compressive bearing capacity for this type of PGWC profile can reach 1.79-fold the sum of those of the wood core and GFRP shell, and its elastic flexural rigidity is 1.2-fold the sum of their rigidities. These results indicate that in PGWC profiles, GFRP and wood materials have a positive combined effect. This study produced a pultruded composite material product with excellent mechanical performance for application in structures that require a large bearing capacity. PMID:26485431
Data Transfer Advisor with Transport Profiling Optimization
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rao, Nageswara S.; Liu, Qiang; Yun, Daqing
The network infrastructures have been rapidly upgraded in many high-performance networks (HPNs). However, such infrastructure investment has not led to corresponding performance improvement in big data transfer, especially at the application layer, largely due to the complexity of optimizing transport control on end hosts. We design and implement ProbData, a PRofiling Optimization Based DAta Transfer Advisor, to help users determine the most effective data transfer method with the most appropriate control parameter values to achieve the best data transfer performance. ProbData employs a profiling optimization based approach to exploit the optimal operational zone of various data transfer methods in supportmore » of big data transfer in extreme scale scientific applications. We present a theoretical framework of the optimized profiling approach employed in ProbData as wellas its detailed design and implementation. The advising procedure and performance benefits of ProbData are illustrated and evaluated by proof-of-concept experiments in real-life networks.« less
Computer programs for generation and evaluation of near-optimum vertical flight profiles
NASA Technical Reports Server (NTRS)
Sorensen, J. A.; Waters, M. H.; Patmore, L. C.
1983-01-01
Two extensive computer programs were developed. The first, called OPTIM, generates a reference near-optimum vertical profile, and it contains control options so that the effects of various flight constraints on cost performance can be examined. The second, called TRAGEN, is used to simulate an aircraft flying along an optimum or any other vertical reference profile. TRAGEN is used to verify OPTIM's output, examine the effects of uncertainty in the values of parameters (such as prevailing wind) which govern the optimum profile, or compare the cost performance of profiles generated by different techniques. A general description of these programs, the efforts to add special features to them, and sample results of their usage are presented.
WAIS-III index score profiles in the Canadian standardization sample.
Lange, Rael T
2007-01-01
Representative index score profiles were examined in the Canadian standardization sample of the Wechsler Adult Intelligence Scale-Third Edition (WAIS-III). The identification of profile patterns was based on the methodology proposed by Lange, Iverson, Senior, and Chelune (2002) that aims to maximize the influence of profile shape and minimize the influence of profile magnitude on the cluster solution. A two-step cluster analysis procedure was used (i.e., hierarchical and k-means analyses). Cluster analysis of the four index scores (i.e., Verbal Comprehension [VCI], Perceptual Organization [POI], Working Memory [WMI], Processing Speed [PSI]) identified six profiles in this sample. Profiles were differentiated by pattern of performance and were primarily characterized as (a) high VCI/POI, low WMI/PSI, (b) low VCI/POI, high WMI/PSI, (c) high PSI, (d) low PSI, (e) high VCI/WMI, low POI/PSI, and (f) low VCI, high POI. These profiles are potentially useful for determining whether a patient's WAIS-III performance is unusual in a normal population.
Intercomparison between ozone profiles measured above Spitsbergen by lidar and sonde techniques
NASA Technical Reports Server (NTRS)
Fabian, Rolf; Vondergathen, Peter; Ehlers, J.; Krueger, Bernd C.; Neuber, Roland; Beyerle, Georg
1994-01-01
This paper compares coincident ozone profile measurements by electrochemical sondes and lidar performed at Ny-Alesund/Spitsbergen. A detailed height dependent statistical analysis of the differences between these complementary methods was performed for the overlapping altitude region (13-35 km). The data set comprises ozone profile measurements conducted between Jan. 1989 and Jan. 1991. Differences of up to 25 percent were found above 30 km altitude.
Expression signature as a biomarker for prenatal diagnosis of trisomy 21.
Volk, Marija; Maver, Aleš; Lovrečić, Luca; Juvan, Peter; Peterlin, Borut
2013-01-01
A universal biomarker panel with the potential to predict high-risk pregnancies or adverse pregnancy outcome does not exist. Transcriptome analysis is a powerful tool to capture differentially expressed genes (DEG), which can be used as biomarker-diagnostic-predictive tool for various conditions in prenatal setting. In search of biomarker set for predicting high-risk pregnancies, we performed global expression profiling to find DEG in Ts21. Subsequently, we performed targeted validation and diagnostic performance evaluation on a larger group of case and control samples. Initially, transcriptomic profiles of 10 cultivated amniocyte samples with Ts21 and 9 with normal euploid constitution were determined using expression microarrays. Datasets from Ts21 transcriptomic studies from GEO repository were incorporated. DEG were discovered using linear regression modelling and validated using RT-PCR quantification on an independent sample of 16 cases with Ts21 and 32 controls. The classification performance of Ts21 status based on expression profiling was performed using supervised machine learning algorithm and evaluated using a leave-one-out cross validation approach. Global gene expression profiling has revealed significant expression changes between normal and Ts21 samples, which in combination with data from previously performed Ts21 transcriptomic studies, were used to generate a multi-gene biomarker for Ts21, comprising of 9 gene expression profiles. In addition to biomarker's high performance in discriminating samples from global expression profiling, we were also able to show its discriminatory performance on a larger sample set 2, validated using RT-PCR experiment (AUC=0.97), while its performance on data from previously published studies reached discriminatory AUC values of 1.00. Our results show that transcriptomic changes might potentially be used to discriminate trisomy of chromosome 21 in the prenatal setting. As expressional alterations reflect both, causal and reactive cellular mechanisms, transcriptomic changes may thus have future potential in the diagnosis of a wide array of heterogeneous diseases that result from genetic disturbances.
Kusurkar, Rashmi A; Croiset, Gerda; Galindo-Garré, Francisca; Ten Cate, Olle
2013-06-19
Students enter the medical study with internally generated motives like genuine interest (intrinsic motivation) and/or externally generated motives like parental pressure or desire for status or prestige (controlled motivation). According to Self-determination theory (SDT), students could differ in their study effort, academic performance and adjustment to the study depending on the endorsement of intrinsic motivation versus controlled motivation. The objectives of this study were to generate motivational profiles of medical students using combinations of high or low intrinsic and controlled motivation and test whether different motivational profiles are associated with different study outcomes. Participating students (N = 844) from University Medical Center Utrecht, the Netherlands, were classified to different subgroups through K-means cluster analysis using intrinsic and controlled motivation scores. Cluster membership was used as an independent variable to assess differences in study strategies, self-study hours, academic performance and exhaustion from study. Four clusters were obtained: High Intrinsic High Controlled (HIHC), Low Intrinsic High Controlled (LIHC), High Intrinsic Low Controlled (HILC), and Low Intrinsic Low Controlled (LILC). HIHC profile, including the students who are interest + status motivated, constituted 25.2% of the population (N = 213). HILC profile, including interest-motivated students, constituted 26.1% of the population (N = 220). LIHC profile, including status-motivated students, constituted 31.8% of the population (N = 268). LILC profile, including students who have a low-motivation and are neither interest nor status motivated, constituted 16.9% of the population (N = 143). Interest-motivated students (HILC) had significantly more deep study strategy (p < 0.001) and self-study hours (p < 0.05), higher GPAs (p < 0.001) and lower exhaustion (p < 0.001) than status-motivated (LIHC) and low-motivation (LILC) students. The interest-motivated profile of medical students (HILC) is associated with good study hours, deep study strategy, good academic performance and low exhaustion from study. The interest + status motivated profile (HIHC) was also found to be associated with a good learning profile, except that students with this profile showed higher surface strategy. Low-motivation (LILC) and status-motivated profiles (LIHC) were associated with the least desirable learning behaviours.
MIZUTANI, Hisashi; SAKO, Toshinori; OKUDA, Hiroko; ARAI, Nobuaki; KURIYAMA, Koji; MORI, Akihiro; YOSHIMURA, Itaru; KOYAMA, Hidekazu
2016-01-01
Density gradient ultracentrifugation (DGUC) and gel electrophoresis are conventionally used to obtain lipoprotein profiles of animals. We recently applied high-performance liquid chromatography with a gel permeation column (GP-HPLC) and an on-line dual enzymatic system to dogs for lipoprotein profile analysis. We compared the GP-HPLC with DGUC as a method to obtain a feline lipoprotein profile. The lipoprotein profiles showed large and small peaks, which corresponded to high-density lipoprotein (HDL) and low-density lipoprotein (LDL), respectively, whereas very low-density lipoprotein (VLDL) and chylomicron (CM) were only marginally detected. This profile was very similar to that of dogs reported previously. Healthy cats also had a small amount of cholesterol-rich particles distinct from the normal LDL or HDL profile. There was no difference in lipoprotein profiles between the sexes, but males had a significantly larger LDL particle size (P=0.015). This study shows the feasibility of GP-HPLC for obtaining accurate lipoprotein profiles with small sample volumes and provides valuable reference data for healthy cats that should facilitate diagnoses. PMID:27170431
Calculation of Airplane Performances Without the Aid of Polar Diagrams
NASA Technical Reports Server (NTRS)
Schrenk, Martin
1928-01-01
For good profiles the profile-drag coefficient is almost constant in the whole range which comes into consideration for practical flight. This is manifest in the consideration of the Gottingen airfoil tests and is confirmed by the investigations of the writer (measurements of the profile drag during flight by the Betz method), concerning which a detailed report will soon be published. The following deductions proceed from this fact. The formulas developed on the assumptions of a constant profile-drag coefficient afford an extensive insight into the influences exerted on flight performances by the structure of the airplane.
Performance Profiles of Major Energy Producers
2011-01-01
The information and analyses in Performance Profiles of Major Energy Producers is intended to provide a critical review, and promote an understanding, of the possible motivations and apparent consequences of investment decisions made by some of the largest corporations in the energy industry.
Leader personality and crew effectiveness - A full-mission simulation experiment
NASA Technical Reports Server (NTRS)
Chidester, Thomas R.; Foushee, H. Clayton
1989-01-01
A full-mission simulation research study was completed to assess the impact of individual personality on crew performance. Using a selection algorithm described by Chidester (1987), captains were classified as fitting one of three profiles along a battery of personality assessment scales. The performances of 23 crews led by captains fitting each profile were contrasted over a one and one-half day simulated trip. Crews led by captains fitting a positive Instrumental-Expressive profile (high achievement motivation and interpersonal skill) were consistently effective and made fewer errors. Crews led by captains fitting a Negative Expressive profile (below average achievement motivation, negative expressive style, such as complaining) were consistently less effective and made more errors. Crews led by captains fitting a Negative Instrumental profile (high levels of competitiveness, Verbal Aggressiveness, and Impatience and Irritability) were less effective on the first day but equal to the best on the second day. These results underscore the importance of stable personality variables as predictors of team coordination and performance.
NASA Technical Reports Server (NTRS)
Chidester, Thomas R.; Foushee, H. Clayton
1989-01-01
A full mission simulation research study was completed to assess the potential for selection along dimensions of personality. Using a selection algorithm described by Chidester (1987), captains were classified as fitting one of three profiles using a battery of personality assessment scales, and the performances of 23 crews led by captains fitting each profile were contrasted over a one and one-half day simulated trip. Crews led by captains fitting a Positive Instrumental Expressive profile (high achievement motivation and interpersonal skill) were consistently effective and made fewer errors. Crews led by captains fitting a Negative Communion profile (below average achievement motivation, negative expressive style, such as complaining) were consistently less effective and made more errors. Crews led by captains fitting a Negative Instrumental profile (high levels of Competitiveness, Verbal Aggressiveness, and Impatience and Irritability) were less effective on the first day but equal to the best on the second day. These results underscore the importance of stable personality variables as predictors of team coordination and performance.
Orsini, Cesar A; Binnie, Vivian I; Tricio, Jorge A
2018-01-01
To determine dental students' motivational profiles through a person-centred approach and to analyse the associations with the satisfaction of their basic psychological needs, study strategies, academic performance, self-esteem, and vitality. A total of 924 students from the University of San Sebastian (Chile) participated in this cross-sectional cor¬relational study in spring 2016. Data were collected through 5 self-reported instruments, in addition to students' academic performance. The Cronbach alpha, descriptive statistics, and correla¬tion scores were computed. A k-means cluster analysis with intrinsic and controlled motivation was conducted to identify different mo-tivational profiles. Subsequently, multivariate analysis of covariance controlling for the effects of gender and year of study was carried out to assess differences among the retained motivational profiles and learning variables. All instruments showed acceptable Cronbach alpha scores. A 4-cluster solution was retained for the motivational profile over a 3- or 5-cluster solution. Students' motiva-tional profiles were characterized by different degrees of intrinsic and controlled motivation. The high intrinsic motivation groups showed higher perceptions of their basic psychological, a greater propensity for a deep rather than surface study strategy, better academic performance, and higher scores for self-esteem and vitality than the low intrinsic motivation groups, regardless of the degree of controlled motivation. Students with a high intrinsic motivation profile, regardless of their controlled motivation scores, reported better learning characteristics. Therefore, special attention should be paid to students' motivational profiles, as the quality of motivation might serve as a basis for interventions to support their academic success and well-being.
NASA Astrophysics Data System (ADS)
Mues, A.; Kuenen, J.; Hendriks, C.; Manders, A.; Segers, A.; Scholz, Y.; Hueglin, C.; Builtjes, P.; Schaap, M.
2014-01-01
In this study the sensitivity of the model performance of the chemistry transport model (CTM) LOTOS-EUROS to the description of the temporal variability of emissions was investigated. Currently the temporal release of anthropogenic emissions is described by European average diurnal, weekly and seasonal time profiles per sector. These default time profiles largely neglect the variation of emission strength with activity patterns, region, species, emission process and meteorology. The three sources dealt with in this study are combustion in energy and transformation industries (SNAP1), nonindustrial combustion (SNAP2) and road transport (SNAP7). First of all, the impact of neglecting the temporal emission profiles for these SNAP categories on simulated concentrations was explored. In a second step, we constructed more detailed emission time profiles for the three categories and quantified their impact on the model performance both separately as well as combined. The performance in comparison to observations for Germany was quantified for the pollutants NO2, SO2 and PM10 and compared to a simulation using the default LOTOS-EUROS emission time profiles. The LOTOS-EUROS simulations were performed for the year 2006 with a temporal resolution of 1 h and a horizontal resolution of approximately 25 × 25km2. In general the largest impact on the model performance was found when neglecting the default time profiles for the three categories. The daily average correlation coefficient for instance decreased by 0.04 (NO2), 0.11 (SO2) and 0.01 (PM10) at German urban background stations compared to the default simulation. A systematic increase in the correlation coefficient is found when using the new time profiles. The size of the increase depends on the source category, component and station. Using national profiles for road transport showed important improvements in the explained variability over the weekdays as well as the diurnal cycle for NO2. The largest impact of the SNAP1 and 2 profiles were found for SO2. When using all new time profiles simultaneously in one simulation, the daily average correlation coefficient increased by 0.05 (NO2), 0.07 (SO2) and 0.03 (PM10) at urban background stations in Germany. This exercise showed that to improve the performance of a CTM, a better representation of the distribution of anthropogenic emission in time is recommendable. This can be done by developing a dynamical emission model that takes into account regional specific factors and meteorology.
The effect of safety factor profile on transport in steady-state, high-performance scenarios
Holcomb, C. T.; Ferron, J. R.; Luce, T. C.; ...
2012-03-09
In this study, an analysis of the dependence of transport on the safety factor profile in high-performance, steady-state scenario discharges is presented. This is based on experimental scans of q 95 and q min taken with fixed β N, toroidal field, double-null plasma shape, divertor pumping, and electron cyclotron current drive input. The temperature and thermal diffusivity profiles were found to vary considerably with the q-profile, and these variations were significantly different for electrons and ions. With fixed q 95, both temperature profiles increase and broaden as q min is increased and the magnetic shear becomes low or negative inmore » the inner half radius, but these temperature profile changes are stronger for the electrons. Power balance calculations show the peak in the ion thermal diffusivity (χ i) at ρ – 0.6 – 0.8 increases with q 95 or q min.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Toropovs, N., E-mail: nikolajs.toropovs@rtu.lv; Riga Technical University, Institute of Materials and Structures, Riga; Lo Monte, F.
2015-02-15
High-Performance Concrete (HPC) is particularly prone to explosive spalling when exposed to high temperature. Although the exact causes that lead to spalling are still being debated, moisture transport during heating plays an important role in all proposed mechanisms. In this study, slabs made of high-performance, low water-to-binder ratio mortars with addition of superabsorbent polymers (SAP) and polypropylene fibers (PP) were heated from one side on a temperature-controlled plate up to 550 °C. A combination of measurements was performed simultaneously on the same sample: moisture profiles via neutron radiography, temperature profiles with embedded thermocouples and pore pressure evolution with embedded pressuremore » sensors. Spalling occurred in the sample with SAP, where sharp profiles of moisture and temperature were observed. No spalling occurred when PP-fibers were introduced in addition to SAP. The experimental procedure described here is essential for developing and verifying numerical models and studying measures against fire spalling risk in HPC.« less
Al-Kandari, Fatimah; Vidal, Victoria L
2007-06-01
This descriptive study of 224 nursing students assessed their health-promoting lifestyle profile and correlated it with the levels of enrollment in nursing courses and academic performance. The health-promoting lifestyle profile was measured by Walker's Health-promoting Lifestyle Profile II instrument. Academic performance was measured by assessing the nursing grade point average and general grade point average of the students. The students had positive health-promoting lifestyles with significant differences noted between males and females in the overall profile, physical activity, interpersonal relations, and stress management. Sociodemographic variables, such as age, nationality, and marital status, but not income, showed an association with students' health-promoting lifestyles. A significant correlation was noted between students' nursing enrollment and level of health responsibility. No significant correlation was established between a health-promoting lifestyle and academic performance. This study poses a challenge for nurse educators to provide an effective environment to maximize students' potential to be future vanguards of health.
Conceptual design of high speed supersonic aircraft: A brief review on SR-71 (Blackbird) aircraft
NASA Astrophysics Data System (ADS)
Xue, Hui; Khawaja, H.; Moatamedi, M.
2014-12-01
The paper presents the conceptual design of high-speed supersonic aircraft. The study focuses on SR-71 (Blackbird) aircraft. The input to the conceptual design is a mission profile. Mission profile is a flight profile of the aircraft defined by the customer. This paper gives the SR-71 aircraft mission profile specified by US air force. Mission profile helps in defining the attributes the aircraft such as wing profile, vertical tail configuration, propulsion system, etc. Wing profile and vertical tail configurations have direct impact on lift, drag, stability, performance and maneuverability of the aircraft. A propulsion system directly influences the performance of the aircraft. By combining the wing profile and the propulsion system, two important parameters, known as wing loading and thrust to weight ratio can be calculated. In this work, conceptual design procedure given by D. P. Raymer (AIAA Educational Series) is applied to calculate wing loading and thrust to weight ratio. The calculated values are compared against the actual values of the SR-71 aircraft. Results indicates that the values are in agreement with the trend of developments in aviation.
Performance of the K+ ion diode in the 2 MV injector for heavy ion fusion
NASA Astrophysics Data System (ADS)
Bieniosek, F. M.; Henestroza, E.; Kwan, J. W.
2002-02-01
Heavy ion beam inertial fusion driver concepts depend on the availability and performance of high-brightness high-current ion sources. Surface ionization sources have relatively low current density but high brightness because of the low temperature of the emitted ions. We have measured the beam profiles at the exit of the injector diode, and compared the measured profiles with EGUN and WARP-3D predictions. Spherical aberrations are significant in this large aspect ratio diode. We discuss the measured and calculated beam size and beam profiles, the effect of aberrations, quality of vacuum, and secondary electron distributions on the beam profile.
Logo recognition in video by line profile classification
NASA Astrophysics Data System (ADS)
den Hollander, Richard J. M.; Hanjalic, Alan
2003-12-01
We present an extension to earlier work on recognizing logos in video stills. The logo instances considered here are rigid planar objects observed at a distance in the scene, so the possible perspective transformation can be approximated by an affine transformation. For this reason we can classify the logos by matching (invariant) line profiles. We enhance our previous method by considering multiple line profiles instead of a single profile of the logo. The positions of the lines are based on maxima in the Hough transform space of the segmented logo foreground image. Experiments are performed on MPEG1 sport video sequences to show the performance of the proposed method.
NASA Astrophysics Data System (ADS)
Mues, A.; Kuenen, J.; Hendriks, C.; Manders, A.; Segers, A.; Scholz, Y.; Hueglin, C.; Builtjes, P.; Schaap, M.
2013-07-01
In this study the sensitivity of the model performance of the chemistry transport model (CTM) LOTOS-EUROS to the description of the temporal variability of emissions was investigated. Currently the temporal release of anthropogenic emissions is described by European average diurnal, weekly and seasonal time profiles per sector. These default time profiles largely neglect the variation of emission strength with activity patterns, region, species, emission process and meteorology. The three sources dealt with in this study are combustion in energy and transformation industries (SNAP1), non-industrial combustion (SNAP2) and road transport (SNAP7). First the impact of neglecting the temporal emission profiles for these SNAP categories on simulated concentrations was explored. In a~second step, we constructed more detailed emission time profiles for the three categories and quantified their impact on the model performance separately as well as combined. The performance in comparison to observations for Germany was quantified for the pollutants NO2, SO2 and PM10 and compared to a simulation using the default LOTOS-EUROS emission time profiles. In general the largest impact on the model performance was found when neglecting the default time profiles for the three categories. The daily average correlation coefficient for instance decreased by 0.04 (NO2), 0.11 (SO2) and 0.01 (PM10) at German urban background stations compared to the default simulation. A systematic increase of the correlation coefficient is found when using the new time profiles. The size of the increase depends on the source category, the component and station. Using national profiles for road transport showed important improvements of the explained variability over the weekdays as well as the diurnal cycle for NO2. The largest impact of the SNAP1 and 2 profiles were found for SO2. When using all new time profiles simultaneously in one simulation the daily average correlation coefficient increased by 0.05 (NO2), 0.07 (SO2) and 0.03 (PM10) at urban background stations in Germany. This exercise showed that to improve the performance of a CTM a better representation of the distribution of anthropogenic emission in time is recommendable. This can be done by developing a dynamical emission model which takes into account regional specific factors and meteorology.
Toka Özer, Türkan; Yula, Erkan; Doğan, Metin; Baskın, Hüseyin
2018-04-27
Incidence of mycobacterial infections has been increasing. However, diagnosis and treatment of mycobacterial infections can be difficult. The aim of this study was to investigate high-performance liquid chromatography (HPLC) analysis of the mycolic acids for rapid identification and dendrogram cluster analysis of mycobacterium species. Clinical specimens received for mycobacterial culture and antimicrobial susceptibility test were processed by standard laboratory protocols. Positive cultures were analyzed with HPLC method. Mycolic acid analysis with HPLC was used for diagnosis of tuberculosis and other mycobacterial infections. These reports were compared with Sherlock Library mycobacterial species, and the similarity index was analyzed. This value was formed by a software in multidimensional space that was the calculation of the average distance between the nearest library profile and unknown profile. The ninety-two samples were identified as M. tuberculosis. (similarity index between 0.593 and 0.994). One of the other strains was identified as M. avium intracellulare (strain No. 82) (SI = 0.906); one of them was identified as M. interjectum (strain no. 89) (SI = 0.644). Total 94 samples were identified, and dendrogram was applied to these samples. Profile A (10.6%), profile B (59.6%), profile C (11.7%), profile D (3.2%), and other profiles as single different profiles were identified. Rates for each as 1% (89, 94, 1, 82, 26, 42, 32, 41, 100, 43, 47, 44, 40, 35). High-performance liquid chromatography is a useful, rapid, reliable, and practical method for diagnosis of mycobacterium species. © 2018 Wiley Periodicals, Inc.
Effect of out-of-roundness on the performance of a diesel engine connecting-rod bearing
NASA Technical Reports Server (NTRS)
Vijayaraghavan, D.; Brewe, D. E.; Keith, T. G., Jr.
1993-01-01
In this paper, the dynamic performance of the Ruston and Hornsby VEB diesel engine connecting-rod bearing with circular and out-of-round profiles is analyzed. The effect of cavitation is considered by using a cavitation algorithm, which mimics JFO boundary conditions. The effect of mass inertia is accounted for by solving coupled nonlinear equations of motion. The journal profiles considered are circular, elliptical, semi-elliptical, and three lobe epicycloid. The predicted journal trajectory and other performance parameters for one complete load cycle are presented for all of the out-of-round profiles and are also compared with the predictions for the circular bearing.
Effect of out-of-roundness on the performance of a diesel engine connecting-rod bearing
NASA Technical Reports Server (NTRS)
Vijayaraghavan, D.; Brewe, D. E.; Keith, T. G., Jr.
1991-01-01
In this paper, the dynamic performance of the Ruston and Hornsby VEB diesel engine connecting-rod bearing with circular and out-of-round profiles is analyzed. The effect of cavitation is considered by using a cavitation algorithm, which mimics JFO boundary conditions. The effect of mass inertia is accounted for by solving coupled nonlinear equations of motion. The journal profiles considered are circular, elliptical, semi-elliptical, and three lobe epicycloid. The predicted journal trajectory and other performance parameters for one complete load cycle are presented for all of the out-of-round profiles and are also compared with the predictions for the circular bearing.
Classification of Features of Pavement Profiles Using Empirical Mode Decomposition
DOT National Transportation Integrated Search
2014-12-01
The Long-Term Pavement Performance (LTPP) database contains surface profile data for numerous pavements that are used mainly for computing International Roughness Index (IRI).(2) In order to obtain more information from these surface profiles, a Hilb...
Profiling an application for power consumption during execution on a compute node
Archer, Charles J; Blocksome, Michael A; Peters, Amanda E; Ratterman, Joseph D; Smith, Brian E
2013-09-17
Methods, apparatus, and products are disclosed for profiling an application for power consumption during execution on a compute node that include: receiving an application for execution on a compute node; identifying a hardware power consumption profile for the compute node, the hardware power consumption profile specifying power consumption for compute node hardware during performance of various processing operations; determining a power consumption profile for the application in dependence upon the application and the hardware power consumption profile for the compute node; and reporting the power consumption profile for the application.
2013-01-01
Background Students enter the medical study with internally generated motives like genuine interest (intrinsic motivation) and/or externally generated motives like parental pressure or desire for status or prestige (controlled motivation). According to Self-determination theory (SDT), students could differ in their study effort, academic performance and adjustment to the study depending on the endorsement of intrinsic motivation versus controlled motivation. The objectives of this study were to generate motivational profiles of medical students using combinations of high or low intrinsic and controlled motivation and test whether different motivational profiles are associated with different study outcomes. Methods Participating students (N = 844) from University Medical Center Utrecht, the Netherlands, were classified to different subgroups through K-means cluster analysis using intrinsic and controlled motivation scores. Cluster membership was used as an independent variable to assess differences in study strategies, self-study hours, academic performance and exhaustion from study. Results Four clusters were obtained: High Intrinsic High Controlled (HIHC), Low Intrinsic High Controlled (LIHC), High Intrinsic Low Controlled (HILC), and Low Intrinsic Low Controlled (LILC). HIHC profile, including the students who are interest + status motivated, constituted 25.2% of the population (N = 213). HILC profile, including interest-motivated students, constituted 26.1% of the population (N = 220). LIHC profile, including status-motivated students, constituted 31.8% of the population (N = 268). LILC profile, including students who have a low-motivation and are neither interest nor status motivated, constituted 16.9% of the population (N = 143). Interest-motivated students (HILC) had significantly more deep study strategy (p < 0.001) and self-study hours (p < 0.05), higher GPAs (p < 0.001) and lower exhaustion (p < 0.001) than status-motivated (LIHC) and low-motivation (LILC) students. Conclusions The interest-motivated profile of medical students (HILC) is associated with good study hours, deep study strategy, good academic performance and low exhaustion from study. The interest + status motivated profile (HIHC) was also found to be associated with a good learning profile, except that students with this profile showed higher surface strategy. Low-motivation (LILC) and status-motivated profiles (LIHC) were associated with the least desirable learning behaviours. PMID:23782767
What Matters from Admissions? Identifying Success and Risk Among Canadian Dental Students.
Plouffe, Rachel A; Hammond, Robert; Goldberg, Harvey A; Chahine, Saad
2018-05-01
The aims of this study were to determine whether different student profiles would emerge in terms of high and low GPA performance in each year of dental school and to investigate the utility of preadmissions variables in predicting performance and performance stability throughout each year of dental school. Data from 11 graduating cohorts (2004-14) at the Schulich School of Medicine & Dentistry, University of Western Ontario, Canada, were collected and analyzed using bivariate correlations, latent profile analysis, and hierarchical generalized linear models (HGLMs). The data analyzed were for 616 students in total (332 males and 284 females). Four models were developed to predict adequate and poor performance throughout each of four dental school years. An additional model was developed to predict student performance stability across time. Two separate student profiles reflecting high and low GPA performance across each year of dental school were identified, and scores on cognitive preadmissions variables differentially predicted the probability of grouping into high and low performance profiles. Students with higher pre-dental GPAs and DAT chemistry were most likely to remain stable in a high-performance group across each year of dental school. Overall, the findings suggest that selection committees should consider pre-dental GPA and DAT chemistry scores as important tools for predicting dental school performance and stability across time. This research is important in determining how to better predict success and failure in various areas of preclinical dentistry courses and to provide low-performing students with adequate academic assistance.
Ozernov-Palchik, Ola; Norton, Elizabeth S; Sideridis, Georgios; Beach, Sara D; Wolf, Maryanne; Gabrieli, John D E; Gaab, Nadine
2017-09-01
Research suggests that early identification of developmental dyslexia is important for mitigating the negative effects of dyslexia, including reduced educational attainment and increased socioemotional difficulties. The strongest pre-literacy predictors of dyslexia are rapid automatized naming (RAN), phonological awareness (PA), letter knowledge, and verbal short-term memory. The relationship among these constructs has been debated, and several theories have emerged to explain the unique role of each in reading ability/disability. Furthermore, the stability of identification of risk based on these measures varies widely across studies, due in part to the different cut-offs employed to designate risk. We applied a latent profile analysis technique with a diverse sample of 1215 kindergarten and pre-kindergarten students from 20 schools, to investigate whether PA, RAN, letter knowledge, and verbal short-term memory measures differentiated between homogenous profiles of performance on these measures. Six profiles of performance emerged from the data: average performers, below average performers, high performers, PA risk, RAN risk, and double-deficit risk (both PA and RAN). A latent class regression model was employed to investigate the longitudinal stability of these groups in a representative subset of children (n = 95) nearly two years later, at the end of 1st grade. Profile membership in the spring semester of pre-kindergarten or fall semester of kindergarten was significantly predictive of later reading performance, with the specific patterns of performance on the different constructs remaining stable across the years. There was a higher frequency of PA and RAN deficits in children from lower socioeconomic status (SES) backgrounds. There was no evidence for the IQ-achievement discrepancy criterion traditionally used to diagnose dyslexia. Our results support the feasibility of early identification of dyslexia risk and point to the heterogeneity of risk profiles. These findings carry important implications for improving outcomes for children with dyslexia, based on more targeted interventions. © 2016 John Wiley & Sons Ltd.
Implementing a Nurse Manager Profile to Improve Unit Performance.
Krugman, Mary E; Sanders, Carolyn L
2016-06-01
Nurse managers face significant pressures in the rapidly changing healthcare environment. Staying current with multiple sources of data, including reports that detail institutional and unit performance outcomes, is particularly challenging. A Nurse Manager Customized Profile was developed at a western academic hospital to provide a 1-page visual of pertinent data to help managers and director supervisors focus coaching to improve unit performance. Use of the Decisional Involvement Scale provided new insights into measuring manager performance.
ERIC Educational Resources Information Center
Stevens, Debbie; Cadorette, Deborah
2012-01-01
The purpose of this article is to examine the background and purpose of using dominance profiles to assist coaches in determining learning preferences for themselves and their athletes. Dominance profiles can provide information that will help coaches understand the differences in how athletes think, act, and learn. Dominance profiles can help…
Profiling Learners' Achievement Goals when Completing Academic Essays
ERIC Educational Resources Information Center
Ng, Chi-Hung Clarence
2009-01-01
This study explored adult learners' goal profiles in relation to the completion of a compulsory academic essay. Based on learners' scores on items assessing mastery, performance-approach, and work-avoidance goals, cluster analyses produced three distinct categories of learners: performance-focused, work-avoidant, and multiple-goal learners. These…
Performance and Comparison of Lithium-Ion Batteries Under Low-Earth-Orbit Mission Profiles
NASA Technical Reports Server (NTRS)
Reid, Concha M.; Smart, Marshall C.; Bugga, Ratnakumar V.; Manzo, Michelle A.; Miller, Thomas B.; Gitzendanner, Rob
2007-01-01
The performance of two 28 V, 25 Ah lithium-ion batteries is being evaluated under low-Earth-orbit mission profiles for satellite and orbiter applications. The batteries are undergoing life testing and have achieved over 12,000 cycles to 40 percent depth-of-discharge.
[Athletic performance, self-esteem and temperamental profile : Which relationship?].
Masmoudi, Jawaher; Trigui, Dorsa; Feki, Ines; Bâati, Imen; Jaoua, Abdelaziz
2015-03-01
Several authors emphasize the close relationship between self-esteem and athletic performance; such a relationship may raise the following question: by saying "strong" or "without any physical condition", is it a fair presentation of the individual's abilities or he reveals the most fundamental aspects of his personality, such as emotional temperament? To evaluate self-esteem, physical self and temperamental profile in a group of sportsmen, and to look for a relationship between these variables and athletic performance. We performed a cross-sectional, descriptive and analytic study in 80 young handball players of the "senior" category. We assessed self-esteem using the Rosenberg Self Esteem Scale, physical self-using the Physical Self-Inventory (PSI), and temperamental profile using the Temperament Evaluation of Memphis, Paris and San Diego Auto-questionnaire (TEMPS-A). Athletic performance was evaluated by the team coach by means of a score ranging from 1 to 10. High self-esteem was correlated to female gender (p=0.03), to an early start of physical activity (p<0.01), and certain dimensions of the physical self: perceived physical value (p=0.02), appearance (p<0.01), and the global score (p=0.01). Athletic performance was correlated to high self-esteem (p<0.01) and to two dimensions of the physical self: the global score (p=0.01) and the perceived physical value (p<0.01). Hyperthymic temperament was associated with high self-esteem (p=0.001). Good athletic performance was associated with hyperthymic (p<0.01) and cyclothymic (p<0.01) temperament. Low athletic performance was associated with depressive (p=0.04) and irritable (p=0.01) temperament. Our study shows the close relationship between selfesteem, temperamental profile and athletic performance. We suggest that the intervention of a psychiatrist or a psychologist aimed at improving sportsmen's' self-esteem might help to achieve better athletic performance. In this intervention, the individual temperamental profile should be taken into account.
Collective hormonal profiles predict group performance.
Akinola, Modupe; Page-Gould, Elizabeth; Mehta, Pranjal H; Lu, Jackson G
2016-08-30
Prior research has shown that an individual's hormonal profile can influence the individual's social standing within a group. We introduce a different construct-a collective hormonal profile-which describes a group's hormonal make-up. We test whether a group's collective hormonal profile is related to its performance. Analysis of 370 individuals randomly assigned to work in 74 groups of three to six individuals revealed that group-level concentrations of testosterone and cortisol interact to predict a group's standing across groups. Groups with a collective hormonal profile characterized by high testosterone and low cortisol exhibited the highest performance. These collective hormonal level results remained reliable when controlling for personality traits and group-level variability in hormones. These findings support the hypothesis that groups with a biological propensity toward status pursuit (high testosterone) coupled with reduced stress-axis activity (low cortisol) engage in profit-maximizing decision-making. The current work extends the dual-hormone hypothesis to the collective level and provides a neurobiological perspective on the factors that determine who rises to the top across, not just within, social hierarchies.
Performance Assessment of Kernel Density Clustering for Gene Expression Profile Data
Zeng, Beiyan; Chen, Yiping P.; Smith, Oscar H.
2003-01-01
Kernel density smoothing techniques have been used in classification or supervised learning of gene expression profile (GEP) data, but their applications to clustering or unsupervised learning of those data have not been explored and assessed. Here we report a kernel density clustering method for analysing GEP data and compare its performance with the three most widely-used clustering methods: hierarchical clustering, K-means clustering, and multivariate mixture model-based clustering. Using several methods to measure agreement, between-cluster isolation, and withincluster coherence, such as the Adjusted Rand Index, the Pseudo F test, the r2 test, and the profile plot, we have assessed the effectiveness of kernel density clustering for recovering clusters, and its robustness against noise on clustering both simulated and real GEP data. Our results show that the kernel density clustering method has excellent performance in recovering clusters from simulated data and in grouping large real expression profile data sets into compact and well-isolated clusters, and that it is the most robust clustering method for analysing noisy expression profile data compared to the other three methods assessed. PMID:18629292
2014-09-01
profile .............................................................. 11 Table 5. Eastman Kodak company profile...schedules. Company profiles for KPMG LLP, Eastman Kodak and Texas Instruments (TI) are presented in Tables 4–6. Following each profile is a summary of the...and business continuity (Giglio n.d.-a). 2. Case Two A company profile (see Table 5) and case study summary on Eastman Kodak are presented in the
Optimizing UV laser focus profiles for improved MALDI performance.
Holle, Armin; Haase, Andreas; Kayser, Markus; Höhndorf, Jens
2006-06-01
Matrix assisted laser desorption/ionization (MALDI) applications, such as proteomics, genomics, clinical profiling and MALDI imaging, have created a growing demand for faster instrumentation. Since the commonly used nitrogen lasers have throughput and life span limitations, diode-pumped solid-state lasers are an alternative. Unfortunately this type of laser shows clear performance limitations in MALDI in terms of sensitivity, resolution and ease of use, for applications such as thin-layer sample preparations, acceptance of various matrices (e.g. DHB for glycopeptides) and MALDI imaging. While it is obvious that the MALDI process has some dependence on the characteristics of the laser used, it is unclear which features are the most critical in determining laser performance for MALDI. In this paper we show, for the first time, that a spatially structured laser beam profile in lieu of a Gaussian profile is of striking importance. This result enabled us to design diode-pumped Nd : YAG lasers that on various critical applications perform as well for MALDI as the nitrogen lasers and in some respects even better. The modulation of the beam profile appears to be a new parameter for optimizing the MALDI process. In addition, the results trigger new questions directing us to a better understanding of the MALDI process. Copyright (c) 2006 John Wiley & Sons, Ltd.
Design of Launch Abort System Thrust Profile and Concept of Operations
NASA Technical Reports Server (NTRS)
Litton, Daniel; O'Keefe, Stephen A.; Winski, Richard G.; Davidson, John B.
2008-01-01
This paper describes how the Abort Motor thrust profile has been tailored and how optimizing the Concept of Operations on the Launch Abort System (LAS) of the Orion Crew Exploration Vehicle (CEV) aides in getting the crew safely away from a failed Crew Launch Vehicle (CLV). Unlike the passive nature of the Apollo system, the Orion Launch Abort Vehicle will be actively controlled, giving the program a more robust abort system with a higher probability of crew survival for an abort at all points throughout the CLV trajectory. By optimizing the concept of operations and thrust profile the Orion program will be able to take full advantage of the active Orion LAS. Discussion will involve an overview of the development of the abort motor thrust profile and the current abort concept of operations as well as their effects on the performance of LAS aborts. Pad Abort (for performance) and Maximum Drag (for separation from the Launch Vehicle) are the two points that dictate the required thrust and shape of the thrust profile. The results in this paper show that 95% success of all performance requirements is not currently met for Pad Abort. Future improvements to the current parachute sequence and other potential changes will mitigate the current problems, and meet abort performance requirements.
Glendale Community College Campus Profile '99.
ERIC Educational Resources Information Center
Spicer, Scot L.; Karpp, Edward R.; Amba, Conrad
The Campus Profile is an annual publication designed to help faculty, staff, and students understand Glendale Community College's (California) diverse operations and make informed decisions. The publication is organized around the statewide accountability model. This year's Campus Profile includes more accountability performance measures than in…
Excimer laser system Profile-500
NASA Astrophysics Data System (ADS)
Atejev, V. V.; Bukreyev, V. S.; Vartapetov, Serge K.; Semenov, A. D.; Sugrobov, V. A.; Turin, V. S.; Fedorov, Sergei N.
1999-07-01
The description of ophthalmological excimer laser system 'PROFILE-500' for photorefractive and physiotherapeutic keratectomy is presented. Excimer Laser Systems 'PROFILE- 500' are optical system that use ArF excimer lasers to perform photorefractive keratectomy or LASIK; surgical procedures used to correct myopia, hyperopia and astigmatism.
HPC Profiling with the Sun Studio™ Performance Tools
NASA Astrophysics Data System (ADS)
Itzkowitz, Marty; Maruyama, Yukon
In this paper, we describe how to use the Sun Studio Performance Tools to understand the nature and causes of application performance problems. We first explore CPU and memory performance problems for single-threaded applications, giving some simple examples. Then, we discuss multi-threaded performance issues, such as locking and false-sharing of cache lines, in each case showing how the tools can help. We go on to describe OpenMP applications and the support for them in the performance tools. Then we discuss MPI applications, and the techniques used to profile them. Finally, we present our conclusions.
Meaning profiles of dwellings, pathways, and metaphors in design: implications for education
NASA Astrophysics Data System (ADS)
Casakin, Hernan; Kreitler, Shulamith
2017-11-01
The study deals with the roles and interrelations of the meaning-based assessments of dwellings, pathways and metaphors in design performance. It is grounded in the Meaning Theory [Kreitler, S., and H. Kreitler. 1990. The Cognitive Foundations of Personality Traits. New York: Plenum], which enables identifying the cognitive contents and processes underlying cognitive performance in different domains, thus rendering them more accessible to educational training. The objectives were to identify the components of the meaning profiles of dwellings, pathways, and metaphors as perceived by design students; to analyse their interrelations; and to examine which of the identified components of these constructs serve as best predictors of design performance aided by the use of metaphors. Participants were administered a design task and questionnaires about the Dimensional Profiles of Dwellings, Pathways, and Metaphors, based on the meaning system. Factors based on the factor analyses of the responses to the three questionnaires were used in regression analyses as predictors of the performance score in a design task. The following three factors of the dimensional meaning profiles of metaphors were significant predictors of design performance: sensory, functional, and structural evaluations. Implications for design education are discussed, primarily concerning the important role of metaphor in design problem-solving.
NASA Astrophysics Data System (ADS)
Huang, Chien-Yao; Lee, Wen-Chin; Lin, Albert
2016-09-01
Co-optimization of the gallium and sulfur profiles in penternary Cu(In,Ga)(Se,S)2 thin film solar cell and its impacts on device performance and variability are investigated in this work. An absorber formation method to modulate the gallium profiling under low sulfur-incorporation is disclosed, which solves the problem of Ga-segregation in selenization. Flatter Ga-profiles, which lack of experimental investigations to date, are explored and an optimal Ga-profile achieving 17.1% conversion efficiency on a 30 cm × 30 cm sub-module without anti-reflection coating is presented. Flatter Ga-profile gives rise to the higher Voc × Jsc by improved bandgap matching to solar spectrum, which is hard to be achieved by the case of Ga-accumulation. However, voltage-induced carrier collection loss is found, as evident from the measured voltage-dependent photocurrent characteristics based on a small-signal circuit model. The simulation results reveal that the loss is attributed to the synergistic effect of the detrimental gallium and sulfur gradients, which can deteriorate the carrier collection especially in quasi-neutral region (QNR). Furthermore, the underlying physics is presented, and it provides a clear physical picture to the empirical trends of device performance, I-V characteristics, and voltage-dependent photocurrent, which cannot be explained by the standard solar circuit model. The parameter "FGa" and front sulfur-gradient are found to play critical roles on the trade-off between space charge region (SCR) recombination and QNR carrier collection. The co-optimized gallium and sulfur gradients are investigated, and the corresponding process modification for further efficiency-enhancement is proposed. In addition, the performance impact of sulfur-gradient variation is studied, and a gallium design for suppressing the sulfur-induced variability is proposed. Device performances of varied Ga-profiles with front sulfur-gradients are simulated based on a compact device model. Finally, an exploratory path toward 20% high-efficiency Ga-profile with robustness against sulfur-induced performance variability is presented.
Castañer, Marta; Andueza, Juan; Hileno, Raúl; Puigarnau, Silvia; Prat, Queralt; Camerino, Oleguer
2018-01-01
Laterality is a key aspect of the analysis of basic and specific motor skills. It is relevant to sports because it involves motor laterality profiles beyond left-right preference and spatial orientation of the body. The aim of this study was to obtain the laterality profiles of young athletes, taking into account the synergies between the support and precision functions of limbs and body parts in the performance of complex motor skills. We applied two instruments: (a) MOTORLAT, a motor laterality inventory comprising 30 items of basic, specific, and combined motor skills, and (b) the Precision and Agility Tapping over Hoops (PATHoops) task, in which participants had to perform a path by stepping in each of 14 hoops arranged on the floor, allowing the observation of their feet, left-right preference and spatial orientation. A total of 96 young athletes performed the PATHoops task and the 30 MOTORLAT items, allowing us to obtain data about limb dominance and spatial orientation of the body in the performance of complex motor skills. Laterality profiles were obtained by means of a cluster analysis and a correlational analysis and a contingency analysis were applied between the motor skills and spatial orientation actions performed. The results obtained using MOTORLAT show that the combined motor skills criterion (for example, turning while jumping) differentiates athletes' uses of laterality, showing a clear tendency toward mixed laterality profiles in the performance of complex movements. In the PATHoops task, the best spatial orientation strategy was “same way” (same foot and spatial wing) followed by “opposite way” (opposite foot and spatial wing), in keeping with the research assumption that actions unfolding in a horizontal direction in front of an observer's eyes are common in a variety of sports. PMID:29930527
Anthropometric Profiling of New Zealand Junior Elite Triathletes
Dave, Bhargav; Dave, Asmi; Kotecha, Nilesh; Oates, Myrtle
2016-01-01
Introduction The triathlon involves a combination of three separate disciplines-swimming, cycling and running. To date, very few studies have been conducted on the anthropometric characteristics of the New Zealand junior elite triathletes. The aim of this study was to determine the correlation between physical traits of calf girth or sum of eight skinfolds (anthropometry) and running or cycling performances in the triathlon event. Methods Eleven junior elite triathletes (6 females, 5 males; (Av. age: 17) who were selected for the New Zealand national squad, were examined in this cross-sectional study. All athletes were measured for the complete anthropometric profile, as per the International Society for Advancement of Kinanthropometry (ISAK) guidelines. It was then correlated with the cycling and running performances using interclass correlation (ICC) with 90% confidence interval (CI) limits. Results A non-significant positive correlation observed between eight skinfolds tests on running performance (ICC: 0.10; 90% CI: −0.68–0.77; p>0.05) and biking performance (ICC: 0.15; 90% CI: −0.65–0.79; p>0.05), suggested athletes with greater body fat may render a better athletic performance. Conversely, a significant negative correlation was observed between calf girth and running performance (ICC:−0.66; 90% CI: −0.94 – −0.12; p<0.05) and a non-significant negative correlation was observed between calf girth and cycling performance (ICC:−0.94; 90% CI: −0.97– 0.68; p>0.05). Conclusion Anthropometric data can help in predicting an ideal body profile. This research indicates the similarities and differences of the New Zealand junior profile and the world junior profile. PMID:27504176
Performance and data analysis aspects of the new DIII-D monostatic profile reflectometer system
Zeng, Lei; Peebles, William A.; Doyle, Edward J.; ...
2014-08-07
A new frequency-modulated (FMCW) profile reflectometer system, featuring a monostatic antenna geometry (using one microwave antenna for both launch and receive), has been installed on the DIII-D tokamak, providing a first experimental test of this measurement approach for profile reflectometry. Significant features of the new system are briefly described in this paper, including the new monostatic arrangement, use of overmoded, broadband transmission waveguide, and dual-polarization combination/demultiplexing. Updated data processing and analysis, and in-service performance aspects of the new monostatic profile reflectometer system are also presented. By using a raytracing code (GENRAY) to determine the approximate trajectory of the probe beam,more » the electron density (n e) profile can be successfully reconstructed with L-mode plasmas vertically shifted by more than 10 cm off the vessel midplane. Specifically, it is demonstrated that the new system has a capability to measure n e profiles with plasma vertical offsets of up to ±17 cm. Furthermore, examples are also presented of accurate, high time and spatial resolution density profile measurements made over a wide range of DIII-D conditions, e.g. the measured temporal evolution of the density profile across an L-H transition.« less
Profiling an application for power consumption during execution on a plurality of compute nodes
Archer, Charles J.; Blocksome, Michael A.; Peters, Amanda E.; Ratterman, Joseph D.; Smith, Brian E.
2012-08-21
Methods, apparatus, and products are disclosed for profiling an application for power consumption during execution on a compute node that include: receiving an application for execution on a compute node; identifying a hardware power consumption profile for the compute node, the hardware power consumption profile specifying power consumption for compute node hardware during performance of various processing operations; determining a power consumption profile for the application in dependence upon the application and the hardware power consumption profile for the compute node; and reporting the power consumption profile for the application.
The first decade of MALDI protein profiling: a lesson in translational biomarker research.
Albrethsen, Jakob
2011-05-16
MALDI protein profiling has identified several important challenges in omics-based biomarker research. First, research into the analytical performance of a novel omics-platform of potential diagnostic impact must be carried out in a critical manner and according to common guidelines. Evaluation studies should be performed at an early time and preferably before massive advancement into explorative biomarker research. In particular, MALDI profiling underscores the need for an adequate understanding of the causal relationship between molecular abundance and the quantitative measure in multivariate biomarker research. Secondly, MALDI profiling has raised awareness of the significant risk of false-discovery in biomarker research due to several confounding factors, including sample processing and unspecific host-response to disease. Here, the experience from MALDI profiling supports that a central challenge in unbiased molecular profiling is to pinpoint the aberrations of clinical interest among potentially massive unspecific changes that can accompany disease. The lessons from the first decade of MALDI protein profiling are relevant for future efforts in advancing omics-based biomarker research beyond the laboratory setting and into clinical verification. Copyright © 2011 Elsevier B.V. All rights reserved.
Characterizing Task-Based OpenMP Programs
Muddukrishna, Ananya; Jonsson, Peter A.; Brorsson, Mats
2015-01-01
Programmers struggle to understand performance of task-based OpenMP programs since profiling tools only report thread-based performance. Performance tuning also requires task-based performance in order to balance per-task memory hierarchy utilization against exposed task parallelism. We provide a cost-effective method to extract detailed task-based performance information from OpenMP programs. We demonstrate the utility of our method by quickly diagnosing performance problems and characterizing exposed task parallelism and per-task instruction profiles of benchmarks in the widely-used Barcelona OpenMP Tasks Suite. Programmers can tune performance faster and understand performance tradeoffs more effectively than existing tools by using our method to characterize task-based performance. PMID:25860023
Design of refractive laser beam shapers to generate complex irradiance profiles
NASA Astrophysics Data System (ADS)
Li, Meijie; Meuret, Youri; Duerr, Fabian; Vervaeke, Michael; Thienpont, Hugo
2014-05-01
A Gaussian laser beam is reshaped to have specific irradiance distributions in many applications in order to ensure optimal system performance. Refractive optics are commonly used for laser beam shaping. A refractive laser beam shaper is typically formed by either two plano-aspheric lenses or by one thick lens with two aspherical surfaces. Ray mapping is a general optical design technique to design refractive beam shapers based on geometric optics. This design technique in principle allows to generate any rotational-symmetric irradiance profile, yet in literature ray mapping is mainly developed to transform a Gaussian irradiance profile to a uniform profile. For more complex profiles especially with low intensity in the inner region, like a Dark Hollow Gaussian (DHG) irradiance profile, ray mapping technique is not directly applicable in practice. In order to these complex profiles, the numerical effort of calculating the aspherical surface points and fitting a surface with sufficient accuracy increases considerably. In this work we evaluate different sampling approaches and surface fitting methods. This allows us to propose and demonstrate a comprehensive numerical approach to efficiently design refractive laser beam shapers to generate rotational-symmetric collimated beams with a complex irradiance profile. Ray tracing analysis for several complex irradiance profiles demonstrates excellent performance of the designed lenses and the versatility of our design procedure.
Interpreting Power-Force-Velocity Profiles for Individualized and Specific Training.
Morin, Jean-Benoît; Samozino, Pierre
2016-03-01
Recent studies have brought new insights into the evaluation of power-force-velocity profiles in both ballistic push-offs (eg, jumps) and sprint movements. These are major physical components of performance in many sports, and the methods the authors developed and validated are based on data that are now rather simple to obtain in field conditions (eg, body mass, jump height, sprint times, or velocity). The promising aspect of these approaches is that they allow for more individualized and accurate evaluation, monitoring, and training practices, the success of which is highly dependent on the correct collection, generation, and interpretation of athletes' mechanical outputs. The authors therefore wanted to provide a practical vade mecum to sports practitioners interested in implementing these power-force-velocity-profiling approaches. After providing a summary of theoretical and practical definitions for the main variables, the authors first detail how vertical profiling can be used to manage ballistic push-off performance, with emphasis on the concept of optimal force-velocity profile and the associated force-velocity imbalance. Furthermore, they discuss these same concepts with regard to horizontal profiling in the management of sprinting performance. These sections are illustrated by typical examples from the authors' practice. Finally, they provide a practical and operational synthesis and outline future challenges that will help further develop these approaches.
Lee, Jueun; Jung, Youngae; Shin, Jeoung-Hwa; Kim, Ho Kyoung; Moon, Byeong Cheol; Ryu, Do Hyun; Hwang, Geum-Sook
2014-07-04
Curcuma, a genus of rhizomatous herbaceous species, has been used as a spice, traditional medicine, and natural dye. In this study, the metabolite profile of Curcuma extracts was determined using gas chromatography-time of flight mass spectrometry (GC/TOF MS) and ultrahigh-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF MS) to characterize differences between Curcuma aromatica and Curcuma longa grown on the Jeju-do or Jin-do islands, South Korea. Previous studies have performed primary metabolite profiling of Curcuma species grown in different regions using NMR-based metabolomics. This study focused on profiling of secondary metabolites from the hexane extract of Curcuma species. Principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA) plots showed significant differences between the C. aromatica and C. longa metabolite profiles, whereas geographical location had little effect. A t-test was performed to identify statistically significant metabolites, such as terpenoids. Additionally, targeted profiling using UPLC/Q-TOF MS showed that the concentration of curcuminoids differed depending on the plant origin. Based on these results, a combination of GC- and LC-MS allowed us to analyze curcuminoids and terpenoids, the typical bioactive compounds of Curcuma, which can be used to discriminate Curcuma samples according to species or geographical origin.
Motivational Profiles as a Combination of Academic Goals in Higher Education
ERIC Educational Resources Information Center
Valle, Antonio; Núñez, José Carlos; Cabanach, Ramón G.; Rodríguez, Susana; Rosário, Pedro; Inglés, Cándido J.
2015-01-01
The aim of the current study was to obtain information from students in higher education on different motivational profiles that resulted from the combination of three academic goals (i.e. learning goals (LG), performance-approach goals and performance-avoidance goals). Moreover, information related to the relevance of each goal within each…
Doman, Caitlin A.; Waddell, Kimberly J.; Bailey, Ryan R.; Moore, Jennifer L.
2016-01-01
OBJECTIVE. This study explored how upper-extremity (UE) functional capacity and daily performance change during the course of outpatient rehabilitation in people with stroke. METHOD. Fifteen participants receiving outpatient occupational therapy services for UE paresis poststroke were enrolled. UE motor capacity was measured with the Action Research Arm Test (ARAT), and UE performance was measured using bilateral, wrist-worn accelerometers. Measurements were taken at or near the start of therapy, at every 10th visit or every 30 days throughout the duration of services, and at discharge. RESULTS. Three patterns were observed: (1) increase in ARAT scores and more normalized accelerometry profiles, (2) increase in ARAT scores but no change in accelerometry profiles, and (3) no change in ARAT scores or in accelerometry profiles. CONCLUSION. UE performance in daily life was highly variable, with inconsistencies between change in UE capacity and change in UE performance. UE capacity and performance are important constructs to assess separately during rehabilitation. PMID:27089298
Synthesis of national risk profile
NASA Technical Reports Server (NTRS)
1979-01-01
The methodology used and results obtained in computing the national risk profile for carbon fibers (CF) released after an aircraft accident (fire or explosion) are presented. The computation was performed by use of twenty-six individual conditional risk profiles, together with the extrapolation of these profiles to other U.S. airports. The risk profile was obtained using 1993 CF utilization forecasts, but numbers of facilities were taken from 1972 and 1975 census data, while losses were expressed in 1977 dollars.
NASA Technical Reports Server (NTRS)
Chidester, Thomas R.; Kanki, Barbara G.; Foushee, H. Clayton; Dickinson, Cortlandt L.; Bowles, Stephen V.
1990-01-01
Crew effectiveness is a joint product of the piloting skills, attitudes, and personality characteristics of team members. As obvious as this point might seem, both traditional approaches to optimizing crew performance and more recent training development highlighting crew coordination have emphasized only the skill and attitudinal dimensions. This volume is the first in a series of papers on this simulation. A subsequent volume will focus on patterns of communication within crews. The results of a full-mission simulation research study assessing the impact of individual personality on crew performance is reported. Using a selection algorithm described in previous research, captains were classified as fitting one of three profiles along a battery of personality assessment scales. The performances of 23 crews led by captains fitting each profile were contrasted over a one-and-one-half-day simulated trip. Crews led by captains fitting a positive Instrumental-Expressive profile (high achievement motivation and interpersonal skill) were consistently effective and made fewer errors. Crews led by captains fitting a Negative Expressive profile (below average achievement motivation, negative expressive style, such as complaining) were consistently less effective and made more errors. Crews led by captains fitting a Negative Instrumental profile (high levels of competitiveness, verbal aggressiveness, and impatience and irritability) were less effective on the first day but equal to the best on the second day. These results underscore the importance of stable personality variables as predictors of team coordination and performance.
VRLA Ultrabattery for high-rate partial-state-of-charge operation
NASA Astrophysics Data System (ADS)
Lam, L. T.; Louey, R.; Haigh, N. P.; Lim, O. V.; Vella, D. G.; Phyland, C. G.; Vu, L. H.; Furukawa, J.; Takada, T.; Monma, D.; Kano, T.
The objective of this study is to produce and test the hybrid valve-regulated Ultrabattery designed specifically for hybrid-electric vehicle duty, i.e., high-rate partial-state-of-charge operation. The Ultrabattery developed by CSIRO Energy Technology is a hybrid energy-storage device, which combines an asymmetric supercapacitor, and a lead-acid battery in one unit cells, taking the best from both technologies without the need for extra, expensive electronic controls. The capacitor will enhance the power and lifespan of the lead-acid battery as it acts as a buffer during high-rate discharging and charging. Consequently, this hybrid technology is able to provide and absorb charge rapidly during vehicle acceleration and braking. The work programme of this study is divided into two main parts, namely, field trial of prototype Ultrabatteries in a Honda Insight HEV and laboratory tests of prototype batteries. In this paper, the performance of prototype Ultrabatteries under different laboratory tests is reported. The evaluation of Ultrabatteries in terms of initial performance and cycling performance has been conducted at both CSIRO and Furukawa laboratories. The initial performance of prototype Ultrabatteries, such as capacity, power, cold cranking and self-discharge has been evaluated based upon the US FreedomCAR Battery Test Manual (DOE/ID-11069, October 2003). Results show that the Ultrabatteries meet, or exceed, respective targets of power, available energy, cold cranking and self-discharge set for both minimum and maximum power-assist HEVs. The cycling performance of prototype Ultrabatteries has been evaluated using: (i) simplified discharge and charge profile to simulate the driving conditions of micro-HEV; (ii) 42-V profile to simulate the driving conditions of mild-HEV and (iii) EUCAR and RHOLAB profiles to simulate the driving conditions of medium-HEV. For comparison purposes, nickel-metal-hydride (Ni-MH) cells, which are presently used in the Honda Insight HEV, have also been subjected to some of the above profiles (i.e., simplified discharge and charge profile and EUCAR profile). Although the Ultrabattery and a Ni-MH cell under EUCAR test profile are still on cycling, the outcomes to date show that the performance of these batteries and cells has been at least four times longer than that of the state-of-the art lead-acid cells or batteries. Excitingly, the performance of Ultrabatteries is proven to be comparable with that of the Ni-MH cells.
Ion Beam Characterization of a NEXT Multi-Thruster Array Plume
NASA Technical Reports Server (NTRS)
Pencil, Eric J.; Foster, John E.; Patterson, Michael J.; Diaz, Esther M.; Van Noord, Jonathan L.; McEwen, Heather K.
2006-01-01
Three operational, engineering model, 7-kW ion thrusters and one instrumented, dormant thruster were installed in a cluster array in a large vacuum facility at NASA Glenn Research Center. A series of engineering demonstration tests were performed to evaluate the system performance impacts of operating various multiple-thruster configurations in an array. A suite of diagnostics was installed to investigate multiple-thruster operation impact on thruster performance and life, thermal interactions, and alternative system modes and architectures. The ion beam characterization included measuring ion current density profiles and ion energy distribution with Faraday probes and retarding potential analyzers, respectively. This report focuses on the ion beam characterization during single thruster operation, multiple thruster operation, various neutralizer configurations, and thruster gimbal articulation. Comparison of beam profiles collected during single and multiple thruster operation demonstrated the utility of superimposing single engine beam profiles to predict multi-thruster beam profiles. High energy ions were detected in the region 45 off the thruster axis, independent of thruster power, number of operating thrusters, and facility background pressure, which indicated that the most probable ion energy was not effected by multiple-thruster operation. There were no significant changes to the beam profiles collected during alternate thruster-neutralizer configurations, therefore supporting the viability of alternative system configuration options. Articulation of one thruster shifted its beam profile, whereas the beam profile of a stationary thruster nearby did not change, indicating there were no beam interactions which was consistent with the behavior of a collisionless beam expansion.
Defensive pessimism, self-esteem and achievement goals: A person-centered approach.
Ferradás Canedo, María M; Freire Rodríguez, Carlos; Regueiro Fernández, Bibiana; Valle Arias, Antonio
2018-02-01
The relationship between defensive pessimism, self-esteem, and achievement goals is a controversial issue. The main contribution of this research is the adoption of a person-centered approach to explore the existence of differentiated profiles of university students, which combine self-esteem and defensive pessimism. In addition, we analyze whether these profiles differ in their achievement goals (learning, performance-approach, performance-avoidance, and work-avoidance). 1,028 university students took part in the study. Four student profiles were identified: (a) HSE/MDP (high self-esteem and moderate defensive pessimism); (b) LSE/LDP (low self-esteem and low defensive pessimism); (c) HSE/LDP (high self-esteem and low defensive pessimism); and (d) LSE/HDP (low self-esteem and high defensive pessimism). These four profiles differ significantly in their achievement goals. The use of defensive pessimism may involve students with either low or high self-esteem, although the two profiles follow differentiated motivational achievement trajectories.
Design and performance of a shape memory alloy-reinforced composite aerodynamic profile
NASA Astrophysics Data System (ADS)
Simpson, J. C.; Boller, C.
2008-04-01
Based on a shape memory alloy (SMA)-reinforced composite developed separately, the applicability of the composite has been demonstrated through realization of a realistically scaled aerodynamic profile of around 0.5 m span by 0.5 m root chord whose skins had been made from this composite. The design, manufacturing and assembly of the profile are described. The curved skins were manufactured with two layers of SMA wires integrated into the layup of aramid fibre prepregs. All SMA wires were connected such that they can be operated as individual sets of wires and at low voltages, similar to the conditions for electrical energy generation in a real aircraft. The profile was then mounted on a vibration test rig and excited by a shaker at its tip which allowed the dynamic performance of the profile to be validated under internal actuation conditions generated through the SMA wires.
USDA-ARS?s Scientific Manuscript database
An ultra-high performance liquid chromatography-ion mobility- quadrupole time-of-flight mass spectrometry (UHPLC-IM-QTOF-MS) method was developed for profiling the indole alkaloids in yohimbe bark. Many indole alkaloids with the yohimbine core structure, plus methylated, oxidized, and reduced speci...
USDA-ARS?s Scientific Manuscript database
Ultra-High Performance-Quadrupole Time of Flight Mass Spectrometr(UHPLC-QToF-MS)profiling has become an impattant tool for identification of marker compounds and generation of metabolic patterns that could be interrogated using chemometric modeling software. Chemometric approaches can be used to ana...
ERIC Educational Resources Information Center
Cox, Daniel J.; Merkel, R. Lawrence; Penberthy, Jennifer Kim; Kovatchev, Boris; Hankin, Cheryl S.
2004-01-01
Objective: Adolescents with attention-deficit/hyperactivity disorder (ADHD) are at high risk for driving accidents. One dose of methylphenidate (MPH) improves simulator driving performances of ADHD-diagnosed adolescents at 1.5 hours post-dose. However, little is known about the effects of different MPH delivery profiles on driving performance…
ERIC Educational Resources Information Center
Nelson, Barry
2013-01-01
The purpose of this study was to determine if a commercial teacher selection tool, the Ventures for Excellence Teacher StyleProfile, had a statistically significant relationship with teacher evaluation and performance feedback data gathered during a teacher's first year of teaching in the Midwest School District. A review of the literature…
Preschool Children's Performance on Profiling Elements of Prosody in Speech-Communication (PEPS-C)
ERIC Educational Resources Information Center
Gibbon, Fiona E.; Smyth, Heather
2013-01-01
Profiling Elements of Prosody in Speech-Communication (PEPS-C) has not been used widely to assess prosodic abilities of preschool children. This study was therefore aimed at investigating typically developing 4-year-olds' performance on PEPS-C. PEPS-C was presented to 30 typically developing 4-year-olds recruited in southern Ireland. Children were…
NASA Technical Reports Server (NTRS)
Stabe, R. G.; Whitney, W. J.; Moffitt, T. P.
1984-01-01
Experimental results are presented for a 0.767 scale model of the first stage of a two-stage turbine designed for a high by-pass ratio engine. The turbine was tested with both uniform inlet conditions and with an inlet radial temperature profile simulating engine conditions. The inlet temperature profile was essentially mixed-out in the rotor. There was also substantial underturning of the exit flow at the mean diameter. Both of these effects were attributed to strong secondary flows in the rotor blading. There were no significant differences in the stage performance with either inlet condition when differences in tip clearance were considered. Performance was very close to design intent in both cases.
ERIC Educational Resources Information Center
Borg, Elin
2015-01-01
Latent profile analysis was used to identify different categories of students having different "profiles" using self-reported classroom behaviour. Four categories of students with unique classroom behaviour profiles were identified among secondary school students in Oslo, Norway (n = 1570). Analyses examined how classroom behaviour…
DOT National Transportation Integrated Search
1994-12-01
This publication consists of individual profiles for each reporting transit agency located in an urbanized area with a population exceeding 200,000. The data contained in each profile consists of general and summary reports, as well as modal, perform...
DOT National Transportation Integrated Search
1995-12-01
This publication consists of individual profiles for each reporting transit agency located in an urbanized area with a population exceeding 200,000. The data contained in each profile consists of general and summary reports, as well as modal, perform...
Sullivan, Courtney; Bilsborough, Johann C; Cianciosi, Michael; Hocking, Joel; Cordy, Justin; Coutts, Aaron J
2014-05-01
To examine the influence of quarter outcome and the margin of the score differential on both the physical activity profile and skill performance of players during professional Australian Football matches. Prospective, longitudinal. Physical activity profiles were assessed via microtechnology (Global Positioning System and accelerometer) from 40 professional AF players from the same team during 15 Australian Football League games. Skill performance measures (involvement and effectiveness) and player rank scores (Champion Data(©) Rank) were provided by a commercial statistical provider. The physical performance variables, skill involvements and individual player performance scores were expressed relative to playing time for each quarter. The influence of the quarter result (i.e. win vs. loss) and score margin (i.e. small: <9 points, moderate: 10-18 points, and large: >19 points) on activity profile and skill involvements and skill efficiency performance of players were examined. Skill involvements (total disposals/min, long kicks/min, marks/min, running bounces/min and player rank/min) were greater in quarters won (all p<0.01). In contrast, the players high speed running distance per minute (>14.5 km h(-1), HSR/min), sprints/min and peak speed were higher in losing quarters (all p<0.01). Smaller score margins were associated with increased physical activity (m/min, HSR/min, and body load/min, all p<0.05) and decreased skill efficiency (handball clangers/min and player rank/min, all p<0.05). Professional AF players are likely to have an increased physical activity profile and decreased skill involvement and proficiency when their team is less successful. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Cui, Ning; Liang, Renrong; Wang, Jing; Xu, Jun
2012-06-01
Choosing novel materials and structures is important for enhancing the on-state current in tunnel field-effect transistors (TFETs). In this paper, we reveal that the on-state performance of TFETs is mainly determined by the energy band profile of the channel. According to this interpretation, we present a new concept of energy band profile modulation (BPM) achieved with gate structure engineering. It is believed that this approach can be used to suppress the ambipolar effect. Based on this method, a Si TFET device with a symmetrical tri-material-gate (TMG) structure is proposed. Two-dimensional numerical simulations demonstrated that the special band profile in this device can boost on-state performance, and it also suppresses the off-state current induced by the ambipolar effect. These unique advantages are maintained over a wide range of gate lengths and supply voltages. The BPM concept can serve as a guideline for improving the performance of nanoscale TFET devices.
Absorbing boundary layers for spin wave micromagnetics
NASA Astrophysics Data System (ADS)
Venkat, G.; Fangohr, H.; Prabhakar, A.
2018-03-01
Micromagnetic simulations are used to investigate the effects of different absorbing boundary layers (ABLs) on spin waves (SWs) reflected from the edges of a magnetic nano-structure. We define the conditions that a suitable ABL must fulfill and compare the performance of abrupt, linear, polynomial and tan hyperbolic damping profiles in the ABL. We first consider normal incidence in a permalloy stripe and propose a transmission line model to quantify reflections and calculate the loss introduced into the stripe due to the ABL. We find that a parabolic damping profile absorbs the SW energy efficiently and has a low reflection coefficient, thus performing much better than the commonly used abrupt damping profile. We then investigated SWs that are obliquely incident at 26.6 °, 45 ° and 63.4 ° on the edge of a yttrium-iron-garnet film. The parabolic damping profile again performs efficiently by showing a high SW energy transfer to the ABL and a low reflected SW amplitude.
Profiling Oman education data using data mining approach
NASA Astrophysics Data System (ADS)
Alawi, Sultan Juma Sultan; Shaharanee, Izwan Nizal Mohd; Jamil, Jastini Mohd
2017-10-01
Nowadays, with a large amount of data generated by many application services in different learning fields has led to the new challenges in education field. Education portal is an important system that leads to a better development of education field. This research paper presents an innovative data mining techniques to understand and summarizes the information of Oman's education data generated from the Ministry of Education Oman "Educational Portal". This research embarks into performing student profiling of the Oman student database. This study utilized the k-means clustering technique to determine the students' profiles. An amount of 42484-student records from Sultanate of Oman has been extracted for this study. The findings of this study show the practicality of clustering technique to investigating student's profiles. Allowing for a better understanding of student's behavior and their academic performance. Oman Education Portal contain a large amounts of user activity and interaction data. Analyses of this large data can be meaningful for educator to improve the student performance level and recognize students who needed additional attention.
Cognitive profiles in euthymic patients with bipolar disorders: results from the FACE-BD cohort.
Roux, Paul; Raust, Aurélie; Cannavo, Anne Sophie; Aubin, Valérie; Aouizerate, Bruno; Azorin, Jean-Michel; Bellivier, Frank; Belzeaux, Raoul; Bougerol, Thierry; Cussac, Iréna; Courtet, Philippe; Etain, Bruno; Gard, Sébastien; Job, Sophie; Kahn, Jean-Pierre; Leboyer, Marion; Olié, Emilie; Henry, Chantal; Passerieux, Christine
2017-03-01
Although cognitive deficits are a well-established feature of bipolar disorders (BD), even during periods of euthymia, little is known about cognitive phenotype heterogeneity among patients with BD. We investigated neuropsychological performance in 258 euthymic patients with BD recruited via the French network of expert centers for BD. We used a test battery assessing six domains of cognition. Hierarchical cluster analysis of the cross-sectional data was used to determine the optimal number of subgroups and to assign each patient to a specific cognitive cluster. Subsequently, subjects from each cluster were compared on demographic, clinical functioning, and pharmacological variables. A four-cluster solution was identified. The global cognitive performance was above normal in one cluster and below normal in another. The other two clusters had a near-normal cognitive performance, with above and below average verbal memory, respectively. Among the four clusters, significant differences were observed in estimated intelligence quotient and social functioning, which were lower for the low cognitive performers compared to the high cognitive performers. These results confirm the existence of several distinct cognitive profiles in BD. Identification of these profiles may help to develop profile-specific cognitive remediation programs, which might improve functioning in BD. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Early Prediction of Lupus Nephritis Using Advanced Proteomics
2010-06-01
SELDI-TOF-MS. Additional proteomic profiling studies using NMR- and MS-based metabonomics have been completed, and LC/MS based protein profiling using...Flight mass spectrometry (SELDI-TOF-MS). Changes in proteomic profiles will be confirmed and enhanced using NMR- and MS-based metabonomics , by Dr...performed using NMR- and MS-based metabonomics at Miami University, in the laboratory of Dr. Michael Kennedy. Initial spectra and profiles obtained show
Achievement goal profiles and developments in effort and achievement in upper elementary school.
Hornstra, Lisette; Majoor, Marieke; Peetsma, Thea
2017-12-01
The multiple goal perspective posits that certain combinations of achievement goals are more favourable than others in terms of educational outcomes. This study aimed to examine longitudinally whether students' achievement goal profiles and transitions between profiles are associated with developments in self-reported and teacher-rated effort and academic achievement in upper elementary school. Participants were 722 fifth-grade students and their teachers in fifth and sixth grade (N = 68). Students reported on their achievement goals and effort in language and mathematics three times in grade 5 to grade 6. Teachers rated students' general school effort. Achievement scores were obtained from school records. Goal profiles were derived with latent profile and transition analyses. Longitudinal multilevel analyses were conducted. Theoretically favourable goal profiles (high mastery and performance-approach goals, low on performance-avoidance goals), as well as transitions from less to more theoretically favourable goal profiles, were associated with higher levels and more growth in effort for language and mathematics and with stronger language achievement gains. Overall, these results provide support for the multiple goal perspective and show the sustained benefits of favourable goal profiles beyond effects of cognitive ability and background characteristics. © 2017 The Authors. British Journal of Education Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.
Effective Filtering of Query Results on Updated User Behavioral Profiles in Web Mining
Sadesh, S.; Suganthe, R. C.
2015-01-01
Web with tremendous volume of information retrieves result for user related queries. With the rapid growth of web page recommendation, results retrieved based on data mining techniques did not offer higher performance filtering rate because relationships between user profile and queries were not analyzed in an extensive manner. At the same time, existing user profile based prediction in web data mining is not exhaustive in producing personalized result rate. To improve the query result rate on dynamics of user behavior over time, Hamilton Filtered Regime Switching User Query Probability (HFRS-UQP) framework is proposed. HFRS-UQP framework is split into two processes, where filtering and switching are carried out. The data mining based filtering in our research work uses the Hamilton Filtering framework to filter user result based on personalized information on automatic updated profiles through search engine. Maximized result is fetched, that is, filtered out with respect to user behavior profiles. The switching performs accurate filtering updated profiles using regime switching. The updating in profile change (i.e., switches) regime in HFRS-UQP framework identifies the second- and higher-order association of query result on the updated profiles. Experiment is conducted on factors such as personalized information search retrieval rate, filtering efficiency, and precision ratio. PMID:26221626
Haring, Alexander P; Tong, Yuxin; Halper, Justin; Johnson, Blake N
2018-06-10
Additive manufacturing (AM) appears poised to provide novel pharmaceutical technology and controlled release systems, yet understanding the effects of processing and post-processing operations on pill design, quality, and performance remains a significant barrier. This paper reports a study of the relationship between programmed concentration profile and resultant temporal release profile using a 3D printed polypill system consisting of a Food and Drug Administration (FDA) approved excipient (Pluronic F-127) and therapeutically relevant dosages of three commonly used oral agents for treatment of type 2 diabetes (300-500 mg per pill). A dual-extrusion hydrogel microextrusion process enables the programming of three unique concentration profiles, including core-shell, multilayer, and gradient structures. Experimental and computational studies of diffusive mass transfer processes reveal that programmed concentration profiles are dynamic throughout both pill 3D printing and solidification. Spectrophotometric assays show that the temporal release profiles could be selectively programmed to exhibit delayed, pulsed, or constant profiles over a 5 h release period by utilizing the core-shell, multilayer, and gradient distributions, respectively. Ultimately, this work provides new insights into the mass transfer processes that affect design, quality, and performance of spatially graded controlled release systems, as well as demonstrating the potential to create disease-specific polypill technology with programmable temporal release profiles. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
The Impact of Hospital Size on CMS Hospital Profiling.
Sosunov, Eugene A; Egorova, Natalia N; Lin, Hung-Mo; McCardle, Ken; Sharma, Vansh; Gelijns, Annetine C; Moskowitz, Alan J
2016-04-01
The Centers for Medicare & Medicaid Services (CMS) profile hospitals using a set of 30-day risk-standardized mortality and readmission rates as a basis for public reporting. These measures are affected by hospital patient volume, raising concerns about uniformity of standards applied to providers with different volumes. To quantitatively determine whether CMS uniformly profile hospitals that have equal performance levels but different volumes. Retrospective analysis of patient-level and hospital-level data using hierarchical logistic regression models with hospital random effects. Simulation of samples including a subset of hospitals with different volumes but equal poor performance (hospital effects=+3 SD in random-effect logistic model). A total of 1,085,568 Medicare fee-for-service patients undergoing 1,494,993 heart failure admissions in 4930 hospitals between July 1, 2005 and June 30, 2008. CMS methodology was used to determine the rank and proportion (by volume) of hospitals reported to perform "Worse than US National Rate." Percent of hospitals performing "Worse than US National Rate" was ∼40 times higher in the largest (fifth quintile by volume) compared with the smallest hospitals (first quintile). A similar gradient was seen in a cohort of 100 hospitals with simulated equal poor performance (0%, 0%, 5%, 20%, and 85% in quintiles 1 to 5) effectively leaving 78% of poor performers undetected. Our results illustrate the disparity of impact that the current CMS method of hospital profiling has on hospitals with higher volumes, translating into lower thresholds for detection and reporting of poor performance.
A ranking index for quality assessment of forensic DNA profiles forensic DNA profiles
2010-01-01
Background Assessment of DNA profile quality is vital in forensic DNA analysis, both in order to determine the evidentiary value of DNA results and to compare the performance of different DNA analysis protocols. Generally the quality assessment is performed through manual examination of the DNA profiles based on empirical knowledge, or by comparing the intensities (allelic peak heights) of the capillary electrophoresis electropherograms. Results We recently developed a ranking index for unbiased and quantitative quality assessment of forensic DNA profiles, the forensic DNA profile index (FI) (Hedman et al. Improved forensic DNA analysis through the use of alternative DNA polymerases and statistical modeling of DNA profiles, Biotechniques 47 (2009) 951-958). FI uses electropherogram data to combine the intensities of the allelic peaks with the balances within and between loci, using Principal Components Analysis. Here we present the construction of FI. We explain the mathematical and statistical methodologies used and present details about the applied data reduction method. Thereby we show how to adapt the ranking index for any Short Tandem Repeat-based forensic DNA typing system through validation against a manual grading scale and calibration against a specific set of DNA profiles. Conclusions The developed tool provides unbiased quality assessment of forensic DNA profiles. It can be applied for any DNA profiling system based on Short Tandem Repeat markers. Apart from crime related DNA analysis, FI can therefore be used as a quality tool in paternal or familial testing as well as in disaster victim identification. PMID:21062433
Energy management using virtual reality improves 2000-m rowing performance.
Hoffmann, Charles P; Filippeschi, Alessandro; Ruffaldi, Emanuele; Bardy, Benoit G
2014-01-01
Elite-standard rowers tend to use a fast-start strategy followed by an inverted parabolic-shaped speed profile in 2000-m races. This strategy is probably the best to manage energy resources during the race and maximise performance. This study investigated the use of virtual reality (VR) with novice rowers as a means to learn about energy management. Participants from an avatar group (n = 7) were instructed to track a virtual boat on a screen, whose speed was set individually to follow the appropriate to-be-learned speed profile. A control group (n = 8) followed an indoor training programme. In spite of similar physiological characteristics in the groups, the avatar group learned and maintained the required profile, resulting in an improved performance (i.e. a decrease in race duration), whereas the control group did not. These results suggest that VR is a means to learn an energy-related skill and improve performance.
Size Matters: Penis Size and Sexual Position in Gay Porn Profiles.
Brennan, Joseph
2018-01-01
This article combines qualitative and quantitative textual approaches to the representation of penis size and sexual position of performers in 10 of the most visited gay pornography Web sites currently in operation. Specifically, in excess of 6,900 performer profiles sourced from 10 commercial Web sites are analyzed. Textual analysis of the profile descriptions is combined with a quantitative representation of disclosed penis size and sexual position, which is presented visually by two figures. The figures confirm that these sites generally market themselves as featuring penises that are extraordinarily large and find a sample-wide correlation between smaller penis sizes (5-6.5 inches) and receptive sexual acts (bottoming), and larger (8.5-13 inches) with penetrative acts (topping). These observations are supported through the qualitative textual readings of how the performers are described on these popular sites, revealing the narratives and marketing strategies that shape the construction of popular porn brands, performers, and profitable fantasies.
Genomics DNA Profiling in Elite Professional Soccer Players: A Pilot Study
Kambouris, M; Del Buono, A; Maffulli, N
2014-01-01
Functional variants in exonic regions have been associated with development of cardiovascular disease, diabetes and cancer. Athletic performance can be considered a multi-factorial complex phenotype. Genomic DNA was extracted from buccal swabs of seven soccer players from the Fulham football team. Single nucleotide polymorphism (SNPs) genotyping was undertaken. To achieve optimal athletic performance, predictive genomics DNA profiling for sports performance can be used to aid in sport selection and elaboration of personalized training and nutrition programs. Predictive DNA profiling may be able to detect athletes with potential or frank injuries, or screening and selection of future athletes, and can help them to maximize utilization of their potential and improve performance in sports. The aim of this study is to provide a wide scenario of specific genomic variants that an athlete carries, to implement which measures should be taken to maximize the athlete’s potential. PMID:24809029
Vandenbroucke, Loren; Verschueren, Karine; Ceulemans, Eva; De Smedt, Bert; De Roover, Kim; Baeyens, Dieter
2016-06-01
Executive functioning (EF), needed for goal-oriented behaviour, thoughts, and emotions, is important for various life domains. This study examined the relationship between family demographics and EF subcomponents. A kindergarten sample was tested on subcomponents of working memory, inhibition, and cognitive flexibility. Parents provided information on demographic variables. For 78 children both EF and demographic data were available. First, demographic profiles were identified within the sample. Two profiles were found: A low-risk profile of mainly two-biological-parent, high-income families with a highly educated mother who did not smoke during pregnancy and a high-risk profile of low-income families with a young, low-educated mother who more often smoked during pregnancy. Second, children with different demographic profiles were compared on EF subcomponents. Results indicate differential relations between family demographics and EF subcomponents: Whereas for most EF subcomponents no association with family demographics was found, high-risk children performed better on response shifting and tended to perform worse on verbal memory than low-risk children. Parenting stress decreased performance only for high-risk children. Although this study found limited impact of family demographics for EF, further longitudinal research can provide nuanced insights about which factors influence specific EF subcomponents during which developmental periods and guide targeted prevention of EF difficulties. © 2015 The British Psychological Society.
Effect of tooth profile modification on wear in internal gears
NASA Astrophysics Data System (ADS)
Tunalioglu, M. S.; Tuc, B.
2018-05-01
Internal gears are often used in the automotive industry when two gears are required to rotate in the same direction. Tooth shapes, slippage speeds at the beginning and end of meshing are different according to the external gears. Manufacturing of internal gears is more difficult than external gears. Thus, it is necessary to determine the working conditions and wear behavior of internal gears carefully. The profile modification method in terms of strength and surface tension of the gear mechanism are performed in order to increase the load-carrying capability. In this study, profile modification method was performed in the internal gears to reduce the wear on the teeth. For this purpose, the wear of the internal gears was theoretically investigated by adapting the Archard wear equation to the internal gears. Closed circuit power circulation system was designed and manufactured to experimentally investigate the wear in internal gears. With this system, wear tests of gears made of St 50 material without profile modification and different profile modifications were made and the results were compared. Experimental study was performed in the same loading and cycle time conditions to validate the theoretical results and it was seen that the results are compatible. According to the experimental results, it is seen that in the internal gears, when profile modification done the wear is decreased in the teeth tip region.
Metabolic Cost of Experimental Exercises
NASA Technical Reports Server (NTRS)
Webb, James T.; Gernhardt, Michael L.
2009-01-01
Although the type and duration of activity during decompression was well documented, the metabolic cost of 1665 subject-exposures with 8 activity profiles from 17 altitude decompression sickness (DCS) protocols at Brooks City-Base, TX from 1983-2005 was not determined. Female and male human volunteers (30 planned, 4 completed) performed activity profiles matching those 8 activity profiles at ground level with continuous monitoring of metabolic cost. A Cosmed K4b2 Cardio Pulmonary Exercise Testing device was used to measure oxygen uptake (VO2) during the profiles. The results show levels of metabolic cost to the females for the profiles tested varied from 4.3 to 25.5 ml/kg/min and from 3.0 to 12.0 ml/kg/min to the males. The increase in VO2 from seated rest to the most strenuous of the 8 activity profiles was 3.6-fold for the females and 2.8-fold for the males. These preliminary data on 4 subjects indicate close agreement of oxygen uptake for activity performed during many subject-exposures as published earlier. The relatively low average oxygen uptake required to perform the most strenuous activity may imply the need for adjustment of modeling efforts using metabolic cost as a risk factor. Better definition of metabolic cost during exposure to altitude, a critical factor in DCS risk, may allow refinement of DCS prediction models.
Performance in College Chemistry: a Statistical Comparison Using Gender and Jungian Personality Type
NASA Astrophysics Data System (ADS)
Greene, Susan V.; Wheeler, Henry R.; Riley, Wayne D.
This study sorted college introductory chemistry students by gender and Jungian personality type. It recognized differences from the general population distribution and statistically compared the students' grades with their Jungian personality types. Data from 577 female students indicated that ESFP (extroverted, sensory, feeling, perceiving) and ENFP (extroverted, intuitive, feeling, perceiving) profiles performed poorly at statistically significant levels when compared with the distribution of females enrolled in introductory chemistry. The comparable analysis using data from 422 male students indicated that the poorly performing male profiles were ISTP (introverted, sensory, thinking, perceiving) and ESTP (extroverted, sensory, thinking, perceiving). ESTJ (extroverted, sensory, thinking, judging) female students withdrew from the course at a statistically significant level. For both genders, INTJ (introverted, intuitive, thinking, judging) students were the best performers. By examining the documented characteristics of Jungian profiles that correspond with poorly performing students in chemistry, one may more effectively assist the learning process and the retention of these individuals in the fields of natural science, engineering, and technology.
Suomi NPP OMPS limb profiler initial sensor performance assessment
NASA Astrophysics Data System (ADS)
Jaross, Glen; Chen, Grace; Kowitt, Mark; Warner, Jeremy; Xu, Philippe; Kelly, Thomas; Linda, Michael; Flittner, David
2012-11-01
Following the successful launch of the Ozone Mapping and Profiler Suite (OMPS) aboard the Suomi National Polar-orbiting Partnership (NPP) spacecraft, the NASA OMPS Limb team began an evaluation of sensor and data product performance in relation to the original goals for this instrument. Does the sensor design work as well as expected, and can limb scatter measurements by NPP OMPS and successor instruments form the basis for accurate long-term monitoring of ozone vertical profiles? While this paper does not address the latter question, the answer to the former is a qualified Yes given this early stage of the mission.
Objective Diagnosis of Cervical Cancer by Tissue Protein Profile Analysis
NASA Astrophysics Data System (ADS)
Patil, Ajeetkumar; Bhat, Sujatha; Rai, Lavanya; Kartha, V. B.; Chidangil, Santhosh
2011-07-01
Protein profiles of homogenized normal cervical tissue samples from hysterectomy subjects and cancerous cervical tissues from biopsy samples collected from patients with different stages of cervical cancer were recorded using High Performance Liquid Chromatography coupled with Laser Induced Fluorescence (HPLC-LIF). The Protein profiles were subjected to Principle Component Analysis to derive statistically significant parameters. Diagnosis of sample types were carried out by matching three parameters—scores of factors, squared residuals, and Mahalanobis Distance. ROC and Youden's Index curves for calibration standards were used for objective estimation of the optimum threshold for decision making and performance.
A comparison of optimal and noise-abatement trajectories of a tilt-rotor aircraft
NASA Technical Reports Server (NTRS)
Schmitz, F. H.; Stepniewski, W. Z.; Gibs, J.; Hinterkeuser, W. Z.
1972-01-01
The potential benefits of flight path control to optimize performance and/or reduce the noise of a tilt-rotor aircraft operating in the takeoff and landing phases of flight are investigated. A theoretical performance-acoustic model is developed and then mathematically flown to yield representative takeoff and landing profiles. Minimum-time and minimum-fuel trajectories are compared to proposed noise-abatement profiles to assess the reductions in annoyance possible through flight path control. Significant reductions are feasible if a nearly vertical-takeoff flight profile is flown near the landing site; however, the time expended and fuel consumed increase.
Goal Profiles, Mental Toughness and its Influence on Performance Outcomes among Wushu Athletes
Roy, Jolly
2007-01-01
This study examined the association between goal orientations and mental toughness and its influence on performance outcomes in competition. Wushu athletes (n = 40) competing in Intervarsity championships in Malaysia completed Task and Ego Orientations in Sport Questionnaire (TEOSQ) and Psychological Performance Inventory (PPI). Using cluster analysis techniques including hierarchical methods and the non-hierarchical method (k-means cluster) to examine goal profiles, a three cluster solution emerged viz. cluster 1 - high task and moderate ego (HT/ME), cluster 2 - moderate task and low ego (MT/LE) and, cluster 3 - moderate task and moderate ego (MT/ME). Analysis of the fundamental areas of mental toughness based on goal profiles revealed that athletes in cluster 1 scored significantly higher on negative energy control than athletes in cluster 2. Further, athletes in cluster 1 also scored significantly higher on positive energy control than athletes in cluster 3. Chi-square (χ2) test revealed no significant differences among athletes with different goal profiles on performance outcomes in the competition. However, significant differences were observed between athletes (medallist and non medallist) in self- confidence (p = 0.001) and negative energy control (p = 0.042). Medallist’s scored significantly higher on self-confidence (mean = 21.82 ± 2.72) and negative energy control (mean = 19.59 ± 2.32) than the non-medallists (self confidence-mean = 18.76 ± 2.49; negative energy control mean = 18.14 ± 1.91). Key points Mental toughness can be influenced by certain goal profile combination. Athletes with successful outcomes in performance (medallist) displayed greater mental toughness. PMID:24198700
Axial Compressor Reversed Flow Performance.
1985-05-01
5.3.2. Axial Tempature Profils TIme-verage axial temperature profiles were acquired through the use of exposed...on the above questions, or any additional details concerning the current application, future potential, or other value of this research. Please use the...were heavily dependent upon the model used for defining compressor post-stall performance, both steady state end transient, especially In the reve a
ERIC Educational Resources Information Center
Unlu, Ali; Schurig, Michael
2015-01-01
Recently, performance profiles in reading, mathematics and science were created using the data collectively available in the Trends in International Mathematics and Science Study (TIMSS) and the Progress in International Reading Literacy Study (PIRLS) 2011. In addition, a classification of children to the end of their primary school years was…
Air Force Handbook. 109th Congress
2009-01-01
FY06 Combat Survivor Evader Locator (CSEL) Acquisition Status Capabilities/Profile Functions /Performance Parameters 38 • Air Force’s primary source for...Broadcast Service (GBS) Capabilities/Profile Acquisition Status Functions /Performance Parameters • Purchase Requirements (Phase 2): • 3 primary ...Operations (AF CONOPS) that support the CSAF and joint vision of combat operations. • AF CONOPS describe key Air Force mission and/or functional areas
Nasr, Mohammed A F; Abd-Elhamid, Tamer; Hussein, Mohamed A
2017-12-01
Meat production efficiency can be enhanced by crossbreeding to capture heterosis. This study aimed to investigate the impact of rabbit genotype on growth performance, carcass traits, meat quality and amino acids profile. A total of 504 weaned rabbits from nine genotypes of full factorial crossing of New Zealand White (NZW), Californian (CA) and Rex (RX) were used. Longissimus thoracis et lumborum muscles were assessed for meat quality and amino acids profile. There were no differences between groups at weaning and 6weeks, but by 10weeks differences were significant (P<0.001) and the numerically heaviest groups were CA×RX and RX×NZW (1970g, P<0.001) with to some extent better amino acids profile. In conclusion, RX growth performance was improved by crossing CA sire with RX dam and RX sire with NZW dam and to have dual purpose breed with better growth performance without hazard on carcass and meat quality. CA×RX and RX×NZW had the heaviest body weight at 10weeks of age and highest body weight gain during the whole finishing period. Copyright © 2017 Elsevier Ltd. All rights reserved.
Autonomous, Controlled, and Amotivated Types of Academic Motivation: A Person-Oriented Analysis
ERIC Educational Resources Information Center
Ratelle, Catherine F.; Guay, Frederic; Vallerand, Robert J.; Larose, Simon; Senecal, Caroline
2007-01-01
The authors investigated students' profiles regarding autonomous, controlled, and amotivated regulation and tested whether profile groups differed on some academic adjustment outcomes. Studies 1 and 2 performed on high school students revealed 3 profiles: (a) students with high levels of both controlled motivation and amotivation but low levels of…
The Profiles in Practice School Reporting Software.
ERIC Educational Resources Information Center
Griffin, Patrick
"The Profiles in Practice: School Reporting Software" provides a framework for reports on different aspects of performance in an assessment program. This booklet is the installation guide and user manual for the Profiles in Practice software, which is included as a CD-ROM. The chapters of the guide are: (1) "Installation"; (2) "Starting the…
WISC-R Subtest Pattern Stability and Learning Disabilities: A Profile Analysis.
ERIC Educational Resources Information Center
Mealor, David J.; Abrams, Pamela F.
Profile analysis was performed on Wechsler Intelligence Scale for Children-Revised (WISC-R) scores of 29 learning disabled students (6-10 years old) in a Specific Learning Disabilities (SLD) program, to determine whether subtest patterns for initial and re-evaluation WISC-R administrations would differ significantly. Profile analysis was applied…
DOT National Transportation Integrated Search
1995-12-01
This publication consists of individual profiles for each reporting transit agency located in an urbanized area with a population less than 200,000. The data contained in each profile consists of general and summary reports, as well as modal, perform...
Contribution of occupational therapy to the assessment of competence: A case study
Blanchet, Marie; Huynh, Tammy; Giroux, Dominique; Bottari, Carolina
2016-06-01
Many occupational therapists contribute to the assessment of competence to take care of oneself and manage one’s affairs, but few guidelines exist regarding this practice with adults who have experienced a traumatic brain injury (TBI). This study explored the ability of the Instrumental Activities of Daily Living Profile (IADL Profile) to capture competence following a TBI. Task performance on the IADL Profile of a 46-year-old man (ML) who was found to be incompetent following a severe TBI was compared to eight control subjects (mean age 49.3 ± 4.2 years). The IADL Profile scores, observable behaviours, and verbalizations were compared using descriptive statistics (M, SD) and qualitative analyses. The independence level of ML was lower than that of the control subjects on seven of the eight tasks of the IADL Profile (p < .05), especially for preparing a hot meal and creating a budget. ML demonstrated difficulties that impacted his performance on many tasks, and he had difficulty critiquing his results. The IADL Profile could be used as part of a functional assessment to document competence. © CAOT 2016.
NASA Astrophysics Data System (ADS)
Ilhan, Z.; Wehner, W. P.; Schuster, E.; Boyer, M. D.; Gates, D. A.; Gerhardt, S.; Menard, J.
2015-11-01
Active control of the toroidal current density profile is crucial to achieve and maintain high-performance, MHD-stable plasma operation in NSTX-U. A first-principles-driven, control-oriented model describing the temporal evolution of the current profile has been proposed earlier by combining the magnetic diffusion equation with empirical correlations obtained at NSTX-U for the electron density, electron temperature, and non-inductive current drives. A feedforward + feedback control scheme for the requlation of the current profile is constructed by embedding the proposed nonlinear, physics-based model into the control design process. Firstly, nonlinear optimization techniques are used to design feedforward actuator trajectories that steer the plasma to a desired operating state with the objective of supporting the traditional trial-and-error experimental process of advanced scenario planning. Secondly, a feedback control algorithm to track a desired current profile evolution is developed with the goal of adding robustness to the overall control scheme. The effectiveness of the combined feedforward + feedback control algorithm for current profile regulation is tested in predictive simulations carried out in TRANSP. Supported by PPPL.
NASA Astrophysics Data System (ADS)
Nguyen, K.-L.; Robert, C.; Conan, J.-M.; Mugnier, L. M.; Cohard, J.-M.; Irvine, M.; Lagouarde, J.-P.
2017-09-01
Two experiments of urban scintillometry were performed recently. Their objective was to study the SCINDAR Cn² profiler performance on a composite urbanforest ground. The SCINDAR provides horizontal Cn² profiles with a few hundred meter profile resolution. Several improvements in data processing are reported: the choice of the spatial resolution of the profile and the hyper-parameters adjustment for Cn² regularization. The distributed Cn² values along the optical path are estimated every minute with small error bars. Their non-uniformity is shown to be consistent with the differences of the line of sight to ground and the coverage of the terrain. The SCINDAR data are also in the same order of magnitude with the three scintillometer data that were simultaneously recorded.
Electrocardiographic anxiety profiles improve speech anxiety.
Kim, Pyoung Won; Kim, Seung Ae; Jung, Keun-Hwa
2012-12-01
The present study was to set out in efforts to determine the effect of electrocardiographic (ECG) feedback on the performance in speech anxiety. Forty-six high school students participated in a speech performance educational program. They were randomly divided into two groups, an experimental group with ECG feedback (N = 21) and a control group (N = 25). Feedback was given with video recording in the control, whereas in the experimental group, an additional ECG feedback was provided. Speech performance was evaluated by the Korean Broadcasting System (KBS) speech ability test, which determines the 10 different speaking categories. ECG was recorded during rest and speech, together with a video recording of the speech performance. Changes in R-R intervals were used to reflect anxiety profiles. Three trials were performed for 3-week program. Results showed that the subjects with ECG feedback revealed a significant improvement in speech performance and anxiety states, which compared to those in the control group. These findings suggest that visualization of the anxiety profile feedback with ECG can be a better cognitive therapeutic strategy in speech anxiety.
NASA Technical Reports Server (NTRS)
Groce, J. L.; Izumi, K. H.; Markham, C. H.; Schwab, R. W.; Thompson, J. L.
1986-01-01
The Local Flow Management/Profile Descent (LFM/PD) algorithm designed for the NASA Transport System Research Vehicle program is described. The algorithm provides fuel-efficient altitude and airspeed profiles consistent with ATC restrictions in a time-based metering environment over a fixed ground track. The model design constraints include accommodation of both published profile descent procedures and unpublished profile descents, incorporation of fuel efficiency as a flight profile criterion, operation within the performance capabilities of the Boeing 737-100 airplane with JT8D-7 engines, and conformity to standard air traffic navigation and control procedures. Holding and path stretching capabilities are included for long delay situations.
NASA Technical Reports Server (NTRS)
Stabe, R. G.; Whitney, W. J.; Moffitt, T. P.
1984-01-01
Experimental results are presented for a 0.767 scale model of the first stage of a two-stage turbine designed for a high by-pass ratio engine. The turbine was tested with both uniform inlet conditions and with an inlet radial temperature profile simulating engine conditions. The inlet temperature profile was essentially mixed-out in the rotor. There was also substantial underturning of the exit flow at the mean diameter. Both of these effects were attributed to strong secondary flows in the rotor blading. There were no significant differences in the stage performance with either inlet condition when differences in tip clearance were considered. Performance was very close to design intent in both cases. Previously announced in STAR as N84-24589
NASA Technical Reports Server (NTRS)
Juhasz, A.
1974-01-01
The performance of a short highly asymmetric annular diffuser equipped with wall bleed (suction) capability was evaluated at nominal inlet Mach numbers of 0.188, 0.264, and 0.324 with the inlet pressure and temperature at near ambient values. The diffuser had an area ratio of 2.75 and a length- to inlet-height ratio of 1.6. Results show that the radial profiles of diffuser exit velocity could be controlled from a severely hub peaked to a slightly tip biased form by selective use of bleed. At the same time, other performance parameters were also improved. These results indicate the possible application of the diffuser bleed technique to control flow profiles to gas turbine combustors.
Jeunet, Camille; N'Kaoua, Bernard; Subramanian, Sriram; Hachet, Martin; Lotte, Fabien
2015-01-01
Mental-Imagery based Brain-Computer Interfaces (MI-BCIs) allow their users to send commands to a computer using their brain-activity alone (typically measured by ElectroEncephaloGraphy-EEG), which is processed while they perform specific mental tasks. While very promising, MI-BCIs remain barely used outside laboratories because of the difficulty encountered by users to control them. Indeed, although some users obtain good control performances after training, a substantial proportion remains unable to reliably control an MI-BCI. This huge variability in user-performance led the community to look for predictors of MI-BCI control ability. However, these predictors were only explored for motor-imagery based BCIs, and mostly for a single training session per subject. In this study, 18 participants were instructed to learn to control an EEG-based MI-BCI by performing 3 MI-tasks, 2 of which were non-motor tasks, across 6 training sessions, on 6 different days. Relationships between the participants' BCI control performances and their personality, cognitive profile and neurophysiological markers were explored. While no relevant relationships with neurophysiological markers were found, strong correlations between MI-BCI performances and mental-rotation scores (reflecting spatial abilities) were revealed. Also, a predictive model of MI-BCI performance based on psychometric questionnaire scores was proposed. A leave-one-subject-out cross validation process revealed the stability and reliability of this model: it enabled to predict participants' performance with a mean error of less than 3 points. This study determined how users' profiles impact their MI-BCI control ability and thus clears the way for designing novel MI-BCI training protocols, adapted to the profile of each user.
Jeunet, Camille; N’Kaoua, Bernard; Subramanian, Sriram; Hachet, Martin; Lotte, Fabien
2015-01-01
Mental-Imagery based Brain-Computer Interfaces (MI-BCIs) allow their users to send commands to a computer using their brain-activity alone (typically measured by ElectroEncephaloGraphy—EEG), which is processed while they perform specific mental tasks. While very promising, MI-BCIs remain barely used outside laboratories because of the difficulty encountered by users to control them. Indeed, although some users obtain good control performances after training, a substantial proportion remains unable to reliably control an MI-BCI. This huge variability in user-performance led the community to look for predictors of MI-BCI control ability. However, these predictors were only explored for motor-imagery based BCIs, and mostly for a single training session per subject. In this study, 18 participants were instructed to learn to control an EEG-based MI-BCI by performing 3 MI-tasks, 2 of which were non-motor tasks, across 6 training sessions, on 6 different days. Relationships between the participants’ BCI control performances and their personality, cognitive profile and neurophysiological markers were explored. While no relevant relationships with neurophysiological markers were found, strong correlations between MI-BCI performances and mental-rotation scores (reflecting spatial abilities) were revealed. Also, a predictive model of MI-BCI performance based on psychometric questionnaire scores was proposed. A leave-one-subject-out cross validation process revealed the stability and reliability of this model: it enabled to predict participants’ performance with a mean error of less than 3 points. This study determined how users’ profiles impact their MI-BCI control ability and thus clears the way for designing novel MI-BCI training protocols, adapted to the profile of each user. PMID:26625261
Al-Khelaifi, Fatima; Diboun, Ilhame; Donati, Francesco; Botrè, Francesco; Alsayrafi, Mohammed; Georgakopoulos, Costas; Suhre, Karsten; Yousri, Noha A; Elrayess, Mohamed A
2018-01-05
The outstanding performance of an elite athlete might be associated with changes in their blood metabolic profile. The aims of this study were to compare the blood metabolic profiles between moderate- and high-power and endurance elite athletes and to identify the potential metabolic pathways underlying these differences. Metabolic profiling of serum samples from 191 elite athletes from different sports disciplines (121 high- and 70 moderate-endurance athletes, including 44 high- and 144 moderate-power athletes), who participated in national or international sports events and tested negative for doping abuse at anti-doping laboratories, was performed using non-targeted metabolomics-based mass spectroscopy combined with ultrahigh-performance liquid chromatography. Multivariate analysis was conducted using orthogonal partial least squares discriminant analysis. Differences in metabolic levels between high- and moderate-power and endurance sports were assessed by univariate linear models. Out of 743 analyzed metabolites, gamma-glutamyl amino acids were significantly reduced in both high-power and high-endurance athletes compared to moderate counterparts, indicating active glutathione cycle. High-endurance athletes exhibited significant increases in the levels of several sex hormone steroids involved in testosterone and progesterone synthesis, but decreases in diacylglycerols and ecosanoids. High-power athletes had increased levels of phospholipids and xanthine metabolites compared to moderate-power counterparts. This pilot data provides evidence that high-power and high-endurance athletes exhibit a distinct metabolic profile that reflects steroid biosynthesis, fatty acid metabolism, oxidative stress, and energy-related metabolites. Replication studies are warranted to confirm differences in the metabolic profiles associated with athletes' elite performance in independent data sets, aiming ultimately for deeper understanding of the underlying biochemical processes that could be utilized as biomarkers with potential therapeutic implications.
Emotional States of Athletes Prior to Performance-Induced Injury
Devonport, Tracey J.; Lane, Andrew M.; Hanin, Yuri L.
2005-01-01
Psychological states experienced by athletes prior to injured, best and worst performances were investigated retrospectively using a mixed methodology. Fifty-nine athletes volunteered to complete an individualized assessment of performance states based on the Individual Zones of Optimal fFunctioning (IZOF) model. A subsection (n = 30) of participants completed a standardized psychometric scale (Brunel Mood Rating Scale: BRUMS), retrospectively describing how they felt before best, worst, and injured performances. IZOF results showed similar emotion states being identified for injured and best performances. Analysis of BRUMS scores indicated a significant main effect for differences in mood by performance outcome, with post-hoc analyses showing best performance was associated with lower scores on depression and fatigue and higher vigor than injured performance and worst performance. Worst performance was associated with higher fatigue and confusion than injured performance. Results indicate that retrospective emotional profiles before injured performance are closer to successful performance, than unsuccessful, and confirm differences between successful and unsuccessful performance. Qualitative and quantitative approaches used to retrospectively assess pre-performance emotional states before three performance outcomes, produced complimentary findings. Practical implications of the study are discussed. Key Points Psychological states experienced by athletes prior to injured, best and worst performances were investigated retrospectively using a mixed methodology. Results indicate that retrospective emotional profiles before injured performance are closer to successful performance, than unsuccessful, and confirm differences between successful and unsuccessful performance, a finding that occurred using both methods. Future research should further examine the emotional antecedents of injury and that applied sport psychologists recognize the potential risk of injury associated with emotional profiles typically linked with best performance. PMID:24501552
NASA Astrophysics Data System (ADS)
Elwood, Teri; Simmons-Potter, Kelly
2017-08-01
Quantification of the effect of temperature on photovoltaic (PV) module efficiency is vital to the correct interpretation of PV module performance under varied environmental conditions. However, previous work has demonstrated that PV module arrays in the field are subject to significant location-based temperature variations associated with, for example, local heating/cooling and array edge effects. Such thermal non-uniformity can potentially lead to under-prediction or over-prediction of PV array performance due to an incorrect interpretation of individual module temperature de-rating. In the current work, a simulated method for modeling the thermal profile of an extended PV array has been investigated through extensive computational modeling utilizing ANSYS, a high-performance computational fluid dynamics (CFD) software tool. Using the local wind speed as an input, simulations were run to determine the velocity at particular points along modular strings corresponding to the locations of temperature sensors along strings in the field. The point velocities were utilized along with laminar flow theories in order to calculate Nusselt's number for each point. These calculations produced a heat flux profile which, when combined with local thermal and solar radiation profiles, were used as inputs in an ANSYS Thermal Transient model that generated a solar string operating temperature profile. A comparison of the data collected during field testing, and the data fabricated by ANSYS simulations, will be discussed in order to authenticate the accuracy of the model.
Assessing Continuous Operator Workload With a Hybrid Scaffolded Neuroergonomic Modeling Approach.
Borghetti, Brett J; Giametta, Joseph J; Rusnock, Christina F
2017-02-01
We aimed to predict operator workload from neurological data using statistical learning methods to fit neurological-to-state-assessment models. Adaptive systems require real-time mental workload assessment to perform dynamic task allocations or operator augmentation as workload issues arise. Neuroergonomic measures have great potential for informing adaptive systems, and we combine these measures with models of task demand as well as information about critical events and performance to clarify the inherent ambiguity of interpretation. We use machine learning algorithms on electroencephalogram (EEG) input to infer operator workload based upon Improved Performance Research Integration Tool workload model estimates. Cross-participant models predict workload of other participants, statistically distinguishing between 62% of the workload changes. Machine learning models trained from Monte Carlo resampled workload profiles can be used in place of deterministic workload profiles for cross-participant modeling without incurring a significant decrease in machine learning model performance, suggesting that stochastic models can be used when limited training data are available. We employed a novel temporary scaffold of simulation-generated workload profile truth data during the model-fitting process. A continuous workload profile serves as the target to train our statistical machine learning models. Once trained, the workload profile scaffolding is removed and the trained model is used directly on neurophysiological data in future operator state assessments. These modeling techniques demonstrate how to use neuroergonomic methods to develop operator state assessments, which can be employed in adaptive systems.
ERIC Educational Resources Information Center
Ortega-Maldonado, Alberto; Llorens, Susana; Acosta, Hedy; Coo, Cristián
2017-01-01
The aim of this study is to explore the differences between face-to-face and on-line students in a post graduate education program. The variables considered are Post Graduate Student's profile, competences and learning outcomes, academic performance and satisfaction. The sample was composed by 47 students (64% face-to-face). Analysis of variance…
Profiles of More and Less Successful L2 Learners: A Cluster Analysis Study
ERIC Educational Resources Information Center
Sparks, Richard L.; Patton, Jon; Ganschow, Leonore
2012-01-01
This retrospective study examined L1 achievement, intelligence, L2 aptitude, and L2 proficiency profiles of 208 students completing two years of high school L2 courses. A cluster analysis was performed to determine whether distinct cognitive and achievement profiles of more and less successful L2 learners would emerge. The results of…
DOT National Transportation Integrated Search
1994-12-01
This publication consists of individual profiles for each reporting transit agency located in an urbanized area with a population less than 200,000. The data contained in each profile consists of general and summary reports, as well as modal, perform...
USDA-ARS?s Scientific Manuscript database
When a wheat endosperm is crushed the force profile shows viscoelastic response and the modulus of elasticity is an important parameter that might have substantial influence on wheat milling. An experiment was performed to model endosperm crush response profile (ECRP) and to determine the modulus o...
ERIC Educational Resources Information Center
Ambrose, Allison S.; Hines, Edward R.; Hodel, Ross A.; Kelly, Kathleen F.; Mushrush, Christopher E., Pruden, Sheila J.; Vogt, W. Paul
2006-01-01
This report is a companion to "Recession, Retrenchment and Recovery: Higher Education Funding and Student Financial Aid" (ED502180). It provides profiles of individual states and their performance on a variety of measures used in the economic and fiscal analysis of the Recession, Retrenchment and Recovery project. The profiles describe the results…
Neural network evaluation of tokamak current profiles for real time control
NASA Astrophysics Data System (ADS)
Wróblewski, Dariusz
1997-02-01
Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q0, minimum value of q, qmin, and the location of qmin. Very good performance of the trained neural network both for simulated test data and for experimental datais demonstrated.
Neural network evaluation of tokamak current profiles for real time control (abstract)
NASA Astrophysics Data System (ADS)
Wróblewski, Dariusz
1997-01-01
Active feedback control of the current profile, requiring real-time determination of the current profile parameters, is envisioned for tokamaks operating in enhanced confinement regimes. The distribution of toroidal current in a tokamak is now routinely evaluated based on external (magnetic probes, flux loops) and internal (motional Stark effect) measurements of the poloidal magnetic field. However, the analysis involves reconstruction of magnetohydrodynamic equilibrium and is too intensive computationally to be performed in real time. In the present study, a neural network is used to provide a mapping from the magnetic measurements (internal and external) to selected parameters of the safety factor profile. The single-pass, feedforward calculation of output of a trained neural network is very fast, making this approach particularly suitable for real-time applications. The network was trained on a large set of simulated equilibrium data for the DIII-D tokamak. The database encompasses a large variety of current profiles including the hollow current profiles important for reversed central shear operation. The parameters of safety factor profile (a quantity related to the current profile through the magnetic field tilt angle) estimated by the neural network include central safety factor, q0, minimum value of q, qmin, and the location of qmin. Very good performance of the trained neural network both for simulated test data and for experimental data is demonstrated.
Frankfort, Suzanne V; van Campen, Jos P C M; Tulner, Linda R; Beijnen, Jos H
2008-09-01
By using surface enhanced laser desorption/ionisation- time of flight mass spectrometry (SELDI-TOF MS) an amyloid beta (Abeta) profile was shown in cerebrospinal fluid (CSF) of patients with dementia. To investigate the Abeta-profile in serum with SELDI-TOF MS, to evaluate if this profile resembles CSF profiles and to investigate the correlation between intensity of Abeta-peptide-peaks in serum and clinical, demographical and genetic variables. Duplicate profiling of Abeta by an SELDI-TOF MS immunocapture assay was performed in 106 patients, suffering from Alzheimer's Disease or Vascular Dementia and age-matched non-demented control patients. Linear regression analyses were performed to investigate the intensities of four selected Abeta peaks as dependent variables in relation to the independent clinical, demographic or genetic variables. Abeta37, Abeta38 and Abeta40 were found among additional unidentified Abeta peptides, with the most pronounced Abeta peak at a molecular mass of 7752. This profile partly resembled the CSF profile. The clinical diagnosis was not a predictive independent variable, however ABCB1 genotypes C1236T, G2677T/A, age and creatinine level showed to be related to Abeta peak intensities in multivariate analyses. We found an Abeta profile in serum that partly resembled the CSF profile in demented patients. Age, creatinine levels, presence of the APOE epsilon4 allele and ABCB1 genotypes (C1236T and G2677T/A) were correlated with the Abeta serum profile. The role of P-gp as an Abeta transporter and the role of ABCB1 genotypes deserves further research. The investigated serum Abeta profile is probably not useful in the diagnosis of dementia.
Personality types and student performance in an introductory physics course
NASA Astrophysics Data System (ADS)
Harlow, Jason J. B.; Harrison, David M.; Justason, Michael; Meyertholen, Andrew; Wilson, Brian
2017-12-01
We measured the personality type of the students in a large introductory physics course of mostly life science students using the True Colors instrument. We found large correlations of personality type with performance on the precourse Force Concept Inventory (FCI), both term tests, the postcourse FCI, and the final examination. We also saw correlations with the normalized gain on the FCI. The personality profile of the students in this course is very different from the profile of the physics faculty and graduate students, and also very different from the profile of students taking the introductory physics course intended for physics majors and specialists.
Sub-microradian Surface Slope Metrology with the ALS Developmental Long Trace Profiler
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yashchuk, Valeriy V; Barber, Samuel; Domning, Edward E.
2009-09-11
A new low budget slope measuring instrument, the Developmental Long Trace Profiler (DLTP), was recently brought to operation at the ALS Optical Metrology Laboratory. The design, instrumental control and data acquisition system, initial alignment and calibration procedures, as well as the developed experimental precautions and procedures are described in detail. The capability of the DLTP to achieve sub-microradian surface slope metrology is verified via cross-comparison measurements with other high performance slope measuring instruments when measuring the same high quality test optics. The directions of future work to develop a surface slope measuring profiler with nano-radian performance are also discussed.
Experimental evaluation of a high performance superconducting torquer
NASA Astrophysics Data System (ADS)
Goldie, James H.; Avakian, Kevin M.; Downer, James R.; Gerver, Michael; Gondhalekar, Vijay; Johnson, Bruce G.
The high performance superconducting torquer (HPSCT) was designed to slew a large inertia in one degree of freedom with a double versine torque profile, a profile used for pointing applications which minimizes the exciting of structural resonances. The program culminated with the successful demonstration of closed loop torque control, following a desired double versine torque profile to an accuracy of approximately 1 percent of the peak torque of the profile. The targeted double versine possessed a peak torque which matches the torque capacity of the Sperry M4500 CMG (controlled moment gyro). The research provided strong evidence of the feasibility of an advanced concept CMG which would use cryoresistive control coils in conjunction with an electromagnetically suspended rotor and superconducting source coil. The cryoresistive coils interact with the superconducting solenoid to develop the desired torque and, in addition, the required suspension forces.
Quantitative high dynamic range beam profiling for fluorescence microscopy
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, T. J., E-mail: t.j.mitchell@dur.ac.uk; Saunter, C. D.; O’Nions, W.
2014-10-15
Modern developmental biology relies on optically sectioning fluorescence microscope techniques to produce non-destructive in vivo images of developing specimens at high resolution in three dimensions. As optimal performance of these techniques is reliant on the three-dimensional (3D) intensity profile of the illumination employed, the ability to directly record and analyze these profiles is of great use to the fluorescence microscopist or instrument builder. Though excitation beam profiles can be measured indirectly using a sample of fluorescent beads and recording the emission along the microscope detection path, we demonstrate an alternative approach where a miniature camera sensor is used directly withinmore » the illumination beam. Measurements taken using our approach are solely concerned with the illumination optics as the detection optics are not involved. We present a miniature beam profiling device and high dynamic range flux reconstruction algorithm that together are capable of accurately reproducing quantitative 3D flux maps over a large focal volume. Performance of this beam profiling system is verified within an optical test bench and demonstrated for fluorescence microscopy by profiling the low NA illumination beam of a single plane illumination microscope. The generality and success of this approach showcases a widely flexible beam amplitude diagnostic tool for use within the life sciences.« less
Collective hormonal profiles predict group performance
Akinola, Modupe; Page-Gould, Elizabeth; Mehta, Pranjal H.; Lu, Jackson G.
2016-01-01
Prior research has shown that an individual’s hormonal profile can influence the individual’s social standing within a group. We introduce a different construct—a collective hormonal profile—which describes a group’s hormonal make-up. We test whether a group’s collective hormonal profile is related to its performance. Analysis of 370 individuals randomly assigned to work in 74 groups of three to six individuals revealed that group-level concentrations of testosterone and cortisol interact to predict a group’s standing across groups. Groups with a collective hormonal profile characterized by high testosterone and low cortisol exhibited the highest performance. These collective hormonal level results remained reliable when controlling for personality traits and group-level variability in hormones. These findings support the hypothesis that groups with a biological propensity toward status pursuit (high testosterone) coupled with reduced stress-axis activity (low cortisol) engage in profit-maximizing decision-making. The current work extends the dual-hormone hypothesis to the collective level and provides a neurobiological perspective on the factors that determine who rises to the top across, not just within, social hierarchies. PMID:27528679
EXECUTIVE FUNCTION PROFILES IN CHILDREN WITH AND WITHOUT SPECIFIC LANGUAGE IMPAIRMENT
Marton, Klara; Campanelli, Luca; Scheuer, Jessica; Yoon, Jungmee; Eichorn, Naomi
2013-01-01
We present findings from a study that focused on specific executive functions (EF) in children with and without specific language impairment (SLI). We analyzed performance patterns and EF profiles (spatial working memory, inhibition control, and sustained attention) in school-age SLI children and two control groups: age-matched and language matched. Our main research goal was to identify those EFs that show a weakness in children with SLI. Our specific aims were to: (1) examine whether the EF problems in children with SLI are domain-general; (2) examine whether deficits in EF in children with SLI can be explained by the general slowness hypothesis or by an overall delay in development; (3) compare EF profiles to examine whether children with SLI show a distinct pattern of performance from their peers. Our findings showed different EF profiles for the groups. We observed differences in performance patterns related to age (e.g., reaction time in response inhibition) and differences related to language status (e.g., sensitivity to interference). The findings show interesting associations in EFs that play a crucial role in language processing. PMID:25302062
Use of a genetic algorithm to improve the rail profile on Stockholm underground
NASA Astrophysics Data System (ADS)
Persson, Ingemar; Nilsson, Rickard; Bik, Ulf; Lundgren, Magnus; Iwnicki, Simon
2010-12-01
In this paper, a genetic algorithm optimisation method has been used to develop an improved rail profile for Stockholm underground. An inverted penalty index based on a number of key performance parameters was generated as a fitness function and vehicle dynamics simulations were carried out with the multibody simulation package Gensys. The effectiveness of each profile produced by the genetic algorithm was assessed using the roulette wheel method. The method has been applied to the rail profile on the Stockholm underground, where problems with rolling contact fatigue on wheels and rails are currently managed by grinding. From a starting point of the original BV50 and the UIC60 rail profiles, an optimised rail profile with some shoulder relief has been produced. The optimised profile seems similar to measured rail profiles on the Stockholm underground network and although initial grinding is required, maintenance of the profile will probably not require further grinding.
Choi, Hye Jeong; Miller-Day, Michelle; Shin, YoungJu; Hecht, Michael L.; Pettigrew, Jonathan; Krieger, Janice L.; Lee, JeongKyu; Graham, John W.
2017-01-01
This current study identifies distinct parent prevention communication profiles and examines whether youth with different parental communication profiles have varying substance use trajectories over time. Eleven schools in two rural school districts in the Midwestern United States were selected, and 784 students were surveyed at three time points from the beginning of 7th grade to the end of 8th grade. A series of latent profile analyses were performed to identify discrete profiles/subgroups of substance-specific prevention communication (SSPC). The results revealed a 4-profile model of SSPC: Active-Open, Passive-Open, Active-Silent, and Passive-Silent. A growth curve model revealed different rates of lifetime substance use depending on the youth’s SSPC profile. These findings have implications for parenting interventions and tailoring messages for parents to fit specific SSPC profiles. PMID:29056872
DC and analog/RF performance optimisation of source pocket dual work function TFET
NASA Astrophysics Data System (ADS)
Raad, Bhagwan Ram; Sharma, Dheeraj; Kondekar, Pravin; Nigam, Kaushal; Baronia, Sagar
2017-12-01
We investigate a systematic study of source pocket tunnel field-effect transistor (SP TFET) with dual work function of single gate material by using uniform and Gaussian doping profile in the drain region for ultra-low power high frequency high speed applications. For this, a n+ doped region is created near the source/channel junction to decrease the depletion width results in improvement of ON-state current. However, the dual work function of the double gate is used for enhancement of the device performance in terms of DC and analog/RF parameters. Further, to improve the high frequency performance of the device, Gaussian doping profile is considered in the drain region with different characteristic lengths which decreases the gate to drain capacitance and leads to drastic improvement in analog/RF figures of merit. Furthermore, the optimisation is performed with different concentrations for uniform and Gaussian drain doping profile and for various sectional length of lower work function of the gate electrode. Finally, the effect of temperature variation on the device performance is demonstrated.
NASA Technical Reports Server (NTRS)
Rao, Gopalakrishna M.; Prettyman-Lukoschek, Jill S.
1995-01-01
The Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft power is provided by the Modular Power Subsystems (MPS) which contains three 50 ampere-hour Nickel Cadmium (NiCd) batteries. The batteries were fabricated by McDonnell Douglas Electronics Systems Company, with the cells fabricated by Gates Aerospace Batteries (GAB), Gainesville, Florida. Shortly following launch, the battery performance characteristics showed similar signatures as the anomalous performance observed on both the Upper Atmosphere Research Satellite (UARS) and the Compton Gamma Ray Observatory (CGRO). This prompted the development and implementation of alternate charging profiles to optimize the spacecraft battery performance. The Flight Operations Team (FOT), under the direction of Goddard Space Flight Center's (GSFC) EP/EUVE Project and Space Power Applications Branch have monitored and managed battery performance through control of the battery Charge to Discharge (C/D) ratio and implementation of a Solar Array (SA) offset. This paper provides a brief overview of the EP/EUVE mission, the MPS, the FOT's battery management for achieving the alternate charging profile, and the observed spacecraft battery performance.
Razban, Behrooz; Nelson, Kristina Y; McMartin, Dena W; Cullimore, D Roy; Wall, Michelle; Wang, Dunling
2012-01-01
An analytical method to produce profiles of bacterial biomass fatty acid methyl esters (FAME) was developed employing rapid agitation followed by static incubation (RASI) using selective media of wastewater microbial communities. The results were compiled to produce a unique library for comparison and performance analysis at a Wastewater Treatment Plant (WWTP). A total of 146 samples from the aerated WWTP, comprising 73 samples of each secondary and tertiary effluent, were included analyzed. For comparison purposes, all samples were evaluated via a similarity index (SI) with secondary effluents producing an SI of 0.88 with 2.7% variation and tertiary samples producing an SI 0.86 with 5.0% variation. The results also highlighted significant differences between the fatty acid profiles of the tertiary and secondary effluents indicating considerable shifts in the bacterial community profile between these treatment phases. The WWTP performance results using this method were highly replicable and reproducible indicating that the protocol has potential as a performance-monitoring tool for aerated WWTPs. The results quickly and accurately reflect shifts in dominant bacterial communities that result when processes operations and performance change.
Cross-wind profiling based on the scattered wave scintillation in a telescope focus.
Banakh, V A; Marakasov, D A; Vorontsov, M A
2007-11-20
The problem of wind profile reconstruction from scintillation of an optical wave scattered off a rough surface in a telescope focus plane is considered. Both the expression for the spatiotemporal correlation function and the algorithm of cross-wind velocity and direction profiles reconstruction based on the spatiotemporal spectrum of intensity of an optical wave scattered by a diffuse target in a turbulent atmosphere are presented. Computer simulations performed under conditions of weak optical turbulence show wind profiles reconstruction by the developed algorithm.
Tisdall, P A; DeYoung, D R; Roberts, G D; Anhalt, J P
1982-01-01
Identification of routine mycobacterial isolates by gas-liquid chromatography profile analysis was performed on 335 strains received at the Mayo Clinic over a 10-month period. Comparison of identification by gas-liquid chromatography versus conventional biochemical profiles was made. The two methods agreed on the identification of 320 isolates, with gas-liquid chromatography profiling making eight errors and biochemical profiling making four errors. In three cases, discrepancies could not be resolved. PMID:6811612
Characterization of transverse profiles
DOT National Transportation Integrated Search
2001-04-01
A study of the transverse profile data currently being collected under the Long Term Pavement Performance project was undertaken. The data were collected by three processes: (1) Dipstick, (2) a photographic method, and (3) straightedge used to collec...
DOT National Transportation Integrated Search
2001-09-01
The Long Term Pavement Performance (LTPP) program has been collecting profile and : International Roughness Index (IRI) information from more than 2,062 test sections since 1989 : using K.J. Law 690DNC optical sensor Profilometers. Analysis of the IR...
ERIC Educational Resources Information Center
Chiang, Hsu-Min; Tsai, Luke Y.; Cheung, Ying Kuen; Brown, Alice; Li, Huacheng
2014-01-01
A meta-analysis was performed to examine differences in IQ profiles between individuals with Asperger's disorder (AspD) and high-functioning autism (HFA). Fifty-two studies were included for this study. The results showed that (a) individuals with AspD had significantly higher full-scale IQ, verbal IQ (VIQ), and performance IQ (PIQ) than did…
NASA Technical Reports Server (NTRS)
Garland, Jay L.; Roberts, Michael S.; Levine, Lanfang H.; Mills, Aaron L.
2003-01-01
Community-level physiological profiling based upon fluorometric detection of oxygen consumption was performed on hydroponic rhizosphere and salt marsh litter samples by using substrate levels as low as 50 ppm with incubation times between 5 and 24 h. The rate and extent of response were increased in samples acclimated to specific substrates and were reduced by limiting nitrogen availability in the wells.
NASA Astrophysics Data System (ADS)
Katoh, Takumi; Matsumura, Ryo; Takaguchi, Ryotaro; Takenaka, Mitsuru; Takagi, Shinichi
2018-04-01
To clarify the process of formation of source regions of high-performance Ge n-channel tunneling field-effect transistors (TFETs), p+-n junctions formed by low-energy ion implantation (I/I) of BF2 atoms are characterized. Here, the formation of p+-n junctions with steep B profiles and low junction leakage is a key issue. The steepness of 5.7 nm/dec in profiles of B implanted into Ge is obtained for BF2 I/I at 3 keV with a dose of 4 × 1014 cm-2. Ge-on-insulator (GOI) n-TFETs with the source tunnel junctions formed by low-energy B and BF2 I/I are fabricated on GOI substrates and the device operation is confirmed. Although the performance at room temperature is significantly degraded by the source junction leakage current, an I on/I off ratio of 105 and the minimum sub-threshold swing (S.S.) of 130 mV/dec are obtained at 10 K. It is found that GOI n-TFETs with steeper B profiles formed by BF2 I/I have led to higher on current and a lower sub-threshold slope, demonstrating the effectiveness of steep B profiles in enhancing the GOI TFET performance.
Profiling optimization for big data transfer over dedicated channels
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yun, D.; Wu, Qishi; Rao, Nageswara S
The transfer of big data is increasingly supported by dedicated channels in high-performance networks, where transport protocols play an important role in maximizing applicationlevel throughput and link utilization. The performance of transport protocols largely depend on their control parameter settings, but it is prohibitively time consuming to conduct an exhaustive search in a large parameter space to find the best set of parameter values. We propose FastProf, a stochastic approximation-based transport profiler, to quickly determine the optimal operational zone of a given data transfer protocol/method over dedicated channels. We implement and test the proposed method using both emulations based onmore » real-life performance measurements and experiments over physical connections with short (2 ms) and long (380 ms) delays. Both the emulation and experimental results show that FastProf significantly reduces the profiling overhead while achieving a comparable level of end-to-end throughput performance with the exhaustive search-based approach.« less
Diagnostic Profiles: A Standard Setting Method for Use with a Cognitive Diagnostic Model
ERIC Educational Resources Information Center
Skaggs, Gary; Hein, Serge F.; Wilkins, Jesse L. M.
2016-01-01
This article introduces the Diagnostic Profiles (DP) standard setting method for setting a performance standard on a test developed from a cognitive diagnostic model (CDM), the outcome of which is a profile of mastered and not-mastered skills or attributes rather than a single test score. In the DP method, the key judgment task for panelists is a…
ERIC Educational Resources Information Center
Withagen, Ans; Vervloed, Mathijs P. J.; Janssen, Neeltje M.; Knoors, Harry; Verhoeven, Ludo
2009-01-01
The Tactual Profile assesses tactual functioning of children with severe visual impairments between 0 and 16 years of age. The Tactual Profile consists of 430 items, measuring tactile skills required for performing everyday tasks at home and in school. Items are graded according to age level and divided into three domains: tactual sensory, tactual…
2007-05-04
TITLE AND SUBTITLE Nonlinear Acoustic Landmine Detection: Profiling Soil Surface Vibrations and Modeling Mesoscopic Elastic Behavior 6. AUTHOR(S...project report; no. 352 (2007) NONLINEAR ACOUSTIC LANDMINE DETECTION: PROFILING SOIL SURFACE VIBRATIONS AND MODELING MESOSCOPIC ELASTIC... model (Caughey 1966). Nonlinear acoustic landmine detection experiments are performed in the anechoic chamber facility using both a buried acrylic
Kang, Hee-Chung; Hong, Jae-Seok
2011-08-16
With a greater emphasis on cost containment in many health care systems, it has become common to evaluate each physician's relative resource use. This study explored the major factors that influence the economic performance rankings of medical clinics in the Korea National Health Insurance (NHI) program by assessing the consistency between cost-efficiency indices constructed using different profiling criteria. Data on medical care benefit costs for outpatient care at medical clinics nationwide were collected from the NHI claims database. We calculated eight types of cost-efficiency index with different profiling criteria for each medical clinic and investigated the agreement between the decile rankings of each index pair using the weighted kappa statistic. The exclusion of pharmacy cost lowered agreement between rankings to the lowest level, and differences in case-mix classification also lowered agreement considerably. A medical clinic may be identified as either cost-efficient or cost-inefficient, even when using the same index, depending on the profiling criteria applied. Whether a country has a single insurance or a multiple-insurer system, it is very important to have standardized profiling criteria for the consolidated management of health care costs.
Real-time feedback control of the plasma density profile on ASDEX Upgrade
NASA Astrophysics Data System (ADS)
Mlynek, A.; Reich, M.; Giannone, L.; Treutterer, W.; Behler, K.; Blank, H.; Buhler, A.; Cole, R.; Eixenberger, H.; Fischer, R.; Lohs, A.; Lüddecke, K.; Merkel, R.; Neu, G.; Ryter, F.; Zasche, D.; ASDEX Upgrade Team
2011-04-01
The spatial distribution of density in a fusion experiment is of significant importance as it enters in numerous analyses and contributes to the fusion performance. The reconstruction of the density profile is therefore commonly done in offline data analysis. In this paper, we present an algorithm which allows for density profile reconstruction from the data of the submillimetre interferometer and the magnetic equilibrium in real-time. We compare the obtained results to the profiles yielded by a numerically more complex offline algorithm. Furthermore, we present recent ASDEX Upgrade experiments in which we used the real-time density profile for active feedback control of the shape of the density profile.
Internal Structure and Morphology Profile in Optimizing Filter Membrane Performance
NASA Astrophysics Data System (ADS)
Sanaei, Pejman; Cummings, Linda J.
Membrane filters are in widespread use, and manufacturers have considerable interest in improving their performance, in terms of particle retention properties, and total throughput over the filter lifetime. A good question to ask is therefore: what is the optimal configuration of filter membranes, in terms of internal morphology (pore size and shape), to achieve the most efficient filtration? To answer this question, we must first propose a robust measure of filtration performance. As filtration occurs the membrane becomes blocked, or fouled, by the impurities in the feed solution, and any performance measure must take account of this. For example, one performance measure might be the total throughput (the volume of filtered feed solution) at the end of the filtration process, when the membrane is so badly blocked that it is deemed no longer functional. Here we present a simplified mathematical model, which (i) characterizes membrane internal pore structure via pore or permeability profiles in the depth of the membrane; (ii) accounts for various membrane fouling mechanisms (adsorption, blocking and cake formation); and (iv) predicts the optimum pore profile for our chosen performance measure. NSF DMS-1261596 and NSF DMS-1615719.
Analysis of Cohesion and Collective Efficacy Profiles for the Performance of Soccer Players
Leo, Francisco M.; Sánchez-Miguel, Pedro A.; Sánchez-Oliva, David; Amado, Diana; García-Calvo, Tomás
2013-01-01
The principal aims of the study were to define different profiles of cohesion and perceived efficacy in soccer players and to measure their differences in performance. The subjects were 235 soccer players in the under-18 category who played in the National League in Spain and 15 coaches whose ages ranged from 29 to 45 years. Diverse instruments to assess cohesion, perceived efficacy, and expectations of success were used in the study. Moreover, we measured playing time and performance. The results of the study proved the existence of four cohesion and efficacy profiles that presented significant differences in expectations of success, playing time, and performance. Furthermore, significant differences were found in the distribution of players in the teams as a function of performance. The main conclusion of this study is that soccer players with higher cohesion and collective efficacy levels belonged to teams that completed the season at the top-level classification. In contrast, athletes with low cohesion and collective efficacy usually played in unsuccessful teams. Coaches and sports psychologists are encouraged to promote both social and task cohesion and collective efficacy to enhance team performance. PMID:24511358
Tm:germanate Fiber Laser for Planetary Water Vapor Atmospheric Profiling
NASA Technical Reports Server (NTRS)
Barnes, Norman P.; De Young, Russell
2009-01-01
The atmospheric profiling of water vapor is necessary for finding life on Mars and weather on Earth. The design and performance of a water vapor lidar based on a Tm:germanate fiber laser is presented.
Motor carrier industry profile : an update 2004-2005.
DOT National Transportation Integrated Search
2005-08-01
This report updates the Motor Carrier Industry Profile: 2001-20031 and Stock Market Performance of Publicly Traded Trucking Sector Stocks by Industry Segment, 2000-20042 to reflect more recent developments of particular significance to the industry a...
Neural network evaluation of reflectometry density profiles for control purposes
NASA Astrophysics Data System (ADS)
Santos, J.; Nunes, F.; Manso, M.; Nunes, I.
1999-01-01
Broadband reflectometry is a diagnostic that is able to measure the density profile with high spatial and temporal resolutions, therefore it can be used to improve the performance of advanced tokamak operation modes and to supplement or correct the magnetics for plasma position control. To perform these tasks real-time processing is needed. Here we present a method that uses a neural network to make a fast evaluation of radial positions for selected density layers. Typical ASDEX Upgrade density profiles were used to generate the simulated network training and test sets. It is shown that the method has the potential to meet the tight timing requirements of control applications with the required accuracy. The network is also able to provide an accurate estimation of the position of density layers below the first density layer which is probed by an O-mode reflectometer, provided that it is trained with a realistic density profile model.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sengupta, M.; Ganesh, R.
The dynamics of cylindrically trapped electron plasma has been investigated using a newly developed 2D Electrostatic PIC code that uses unapproximated, mass-included equations of motion for simulation. Exhaustive simulations, covering the entire range of Brillouin ratio, were performed for uniformly filled circular profiles in rigid rotor equilibrium. The same profiles were then loaded away from equilibrium with an initial value of rigid rotation frequency different from that required for radial force balance. Both these sets of simulations were performed for an initial zero-temperature or cold load of the plasma with no spread in either angular velocity or radial velocity. Themore » evolution of the off-equilibrium initial conditions to a steady state involve radial breathing of the profile that scales in amplitude and algebraic growth with Brillouin fraction. For higher Brillouin fractions, the growth of the breathing mode is followed by complex dynamics of spontaneous hollow density structures, excitation of poloidal modes, leading to a monotonically falling density profile.« less
Comparing Experiment and Computation of Hypersonic Laminar Boundary Layers with Isolated Roughness
NASA Technical Reports Server (NTRS)
Bathel, Brett F.; Iyer, Prahladh S.; Mahesh, Krishnan; Danehy, Paul M.; Inman, Jennifer A.; Jones, Stephen B.; Johansen, Craig T.
2014-01-01
Streamwise velocity profile behavior in a hypersonic laminar boundary layer in the presence of an isolated roughness element is presented for an edge Mach number of 8.2. Two different roughness element types are considered: a 2-mm tall, 4-mm diameter cylinder, and a 2-mm radius hemisphere. Measurements of the streamwise velocity behavior using nitric oxide (NO) planar laser-induced fluorescence (PLIF) molecular tagging velocimetry (MTV) have been performed on a 20-degree wedge model. The top surface of this model acts as a flat-plate and is oriented at 5 degrees with respect to the freestream flow. Computations using direct numerical simulation (DNS) of these flows have been performed and are compared to the measured velocity profiles. Particular attention is given to the characteristics of velocity profiles immediately upstream and downstream of the roughness elements. In these regions, the streamwise flow can experience strong deceleration or acceleration. An analysis in which experimentally measured MTV profile displacements are compared with DNS particle displacements is performed to determine if the assumption of constant velocity over the duration of the MTV measurement is valid. This assumption is typically made when reporting MTV-measured velocity profiles, and may result in significant errors when comparing MTV measurements to computations in regions with strong deceleration or acceleration. The DNS computations with the cylindrical roughness element presented in this paper were performed with and without air injection from a rectangular slot upstream of the cylinder. This was done to determine the extent to which gas seeding in the MTV measurements perturbs the boundary layer flowfield.
Hybrid Organic/Inorganic Materials Depth Profiling Using Low Energy Cesium Ions
NASA Astrophysics Data System (ADS)
Noël, Céline; Houssiau, Laurent
2016-05-01
The structures developed in organic electronics, such as organic light emitting diodes (OLEDs) or organic photovoltaics (OPVs) devices always involve hybrid interfaces, joining metal or oxide layers with organic layers. No satisfactory method to probe these hybrid interfaces physical chemistry currently exists. One promising way to analyze such interfaces is to use in situ ion beam etching, but this requires ion beams able to depth profile both inorganic and organic layers. Mono- or diatomic ion beams commonly used to depth profile inorganic materials usually perform badly on organics, while cluster ion beams perform excellently on organics but yield poor results when organics and inorganics are mixed. Conversely, low energy Cs+ beams (<500 eV) allow organic and inorganic materials depth profiling with comparable erosion rates. This paper shows a successful depth profiling of a model hybrid system made of metallic (Au, Cr) and organic (tyrosine) layers, sputtered with 500 eV Cs+ ions. Tyrosine layers capped with metallic overlayers are depth profiled easily, with high intensities for the characteristic molecular ions and other specific fragments. Metallic Au or Cr atoms are recoiled into the organic layer where they cause some damage near the hybrid interface as well as changes in the erosion rate. However, these recoil implanted metallic atoms do not appear to severely degrade the depth profile overall quality. This first successful hybrid depth profiling report opens new possibilities for the study of OLEDs, organic solar cells, or other hybrid devices.
NASA Technical Reports Server (NTRS)
Aires, F.; Rossow, W. B.; Scott, N. A.; Chedin, A.; Hansen, James E. (Technical Monitor)
2001-01-01
A fast temperature water vapor and ozone atmospheric profile retrieval algorithm is developed for the high spectral resolution Infrared Atmospheric Sounding Interferometer (IASI) space-borne instrument. Compression and de-noising of IASI observations are performed using Principal Component Analysis. This preprocessing methodology also allows, for a fast pattern recognition in a climatological data set to obtain a first guess. Then, a neural network using first guess information is developed to retrieve simultaneously temperature, water vapor and ozone atmospheric profiles. The performance of the resulting fast and accurate inverse model is evaluated with a large diversified data set of radiosondes atmospheres including rare events.
More effective nutrition label formats are not necessarily preferred.
Levy, A S; Fein, S B; Schucker, R E
1992-10-01
An experimental design was used to compare performance and preference for five nutrition label formats. Four performance measures--accuracy and false-positives in identifying nutrient differences, time required, and correctness in judging which product was more nutritious--were derived from a product-comparison task. A sample of 1,460 food shoppers over 18 years old was recruited by a shopping mall-intercept method. Results of the study demonstrated that preferences and performance do not necessarily agree. The Control format, which had no nutrition profile information, performed the best but was liked the least. The Adjectival format, which provided nutrition profile information in the form of descriptive adjectives, was the most preferred. Results also showed that listing Daily Reference Values or nutrition profile aids increased preference but either did not affect performance or decreased it, depending on the specific aid and performance measure. Formats that some subjects liked for having adequate information others disliked for being hard to use. Formats that some subjects liked for being easy to use others disliked for having inadequate information. Age, education, and race were related to all of the performance measures except judgment of relative nutrition. Only gender was related to preference. Results of the study are useful as guidance for the development of consumer education materials.
1980-01-01
instability at low flows was investigated. The major cause was found to be flow detachment from the impeller vanes . ] Slotted blades were found to be...Characteristics (70 RPM), Variant (D- Aerofoil Blades , Sets VB1, 2 & 3...12 7 Pressure Rise - Flow Characteristics (70 RPM), Variant () - Slotted Aerofoil Blades , Sets VB1, 2 & 3
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhu, Xiangqi; Wang, Jiyu; Mulcahy, David
This paper presents a voltage-load sensitivity matrix (VLSM) based voltage control method to deploy demand response resources for controlling voltage in high solar penetration distribution feeders. The IEEE 123-bus system in OpenDSS is used for testing the performance of the preliminary VLSM-based voltage control approach. A load disaggregation process is applied to disaggregate the total load profile at the feeder head to each load nodes along the feeder so that loads are modeled at residential house level. Measured solar generation profiles are used in the simulation to model the impact of solar power on distribution feeder voltage profiles. Different casemore » studies involving various PV penetration levels and installation locations have been performed. Simulation results show that the VLSM algorithm performance meets the voltage control requirements and is an effective voltage control strategy.« less
ERIC Educational Resources Information Center
Ko, Stephen; Chan, Simon C. H.
2017-01-01
The authors draw on the taxonomy of managerial competencies to assess the alignment of perceptions between industry practitioners and business academics when profiling managerial competencies required for effective performance in workplaces. Findings show that the set of managerial competency profiles, as viewed by practitioners, generally fit…
Task-based exposure assessment of nanoparticles in the workplace
NASA Astrophysics Data System (ADS)
Ham, Seunghon; Yoon, Chungsik; Lee, Euiseung; Lee, Kiyoung; Park, Donguk; Chung, Eunkyo; Kim, Pilje; Lee, Byoungcheun
2012-09-01
Although task-based sampling is, theoretically, a plausible approach to the assessment of nanoparticle exposure, few studies using this type of sampling have been published. This study characterized and compared task-based nanoparticle exposure profiles for engineered nanoparticle manufacturing workplaces (ENMW) and workplaces that generated welding fumes containing incidental nanoparticles. Two ENMW and two welding workplaces were selected for exposure assessments. Real-time devices were utilized to characterize the concentration profiles and size distributions of airborne nanoparticles. Filter-based sampling was performed to measure time-weighted average (TWA) concentrations, and off-line analysis was performed using an electron microscope. Workplace tasks were recorded by researchers to determine the concentration profiles associated with particular tasks/events. This study demonstrated that exposure profiles differ greatly in terms of concentrations and size distributions according to the task performed. The size distributions recorded during tasks were different from both those recorded during periods with no activity and from the background. The airborne concentration profiles of the nanoparticles varied according to not only the type of workplace but also the concentration metrics. The concentrations measured by surface area and the number concentrations measured by condensation particle counter, particulate matter 1.0, and TWA mass concentrations all showed a similar pattern, whereas the number concentrations measured by scanning mobility particle sizer indicated that the welding fume concentrations at one of the welding workplaces were unexpectedly higher than were those at workplaces that were engineering nanoparticles. This study suggests that a task-based exposure assessment can provide useful information regarding the exposure profiles of nanoparticles and can therefore be used as an exposure assessment tool.
Pimperton, Hannah; Nation, Kate
2010-06-01
Poor comprehenders are children who show significant deficits in their reading comprehension performance, despite average, or above-average word reading ability. To date, there have been no in-depth studies of the mathematical performance profiles of such children. This study aimed to explore the mathematical profiles of poor comprehenders. Given that language impairment is associated with difficulties with mathematics, and that poor comprehenders tend to have oral language weaknesses, we hypothesized that poor comprehenders would show relative weaknesses in aspects of mathematical performance. From a sample of 109 children aged 7-8 years, we selected 14 poor comprehenders and 14 controls with age-appropriate reading comprehension ability. The groups were matched on non-verbal ability, multiple measures of reading accuracy, and chronological age. We compared the performance of the group of poor comprehenders with that of the matched controls on two standardized measures of mathematical ability, one measuring procedural arithmetic prowess and the other tapping higher-level mathematical reasoning. Although there were no group differences in performance on the arithmetic measure, the poor comprehenders showed significantly lower scores than the controls on the mathematical reasoning task. The poor comprehenders exhibited impaired verbal ability relative to controls, with these differences in verbal ability associated with the group differences found on the test of mathematical reasoning. Poor comprehenders' deficits are not limited to the domain of literacy; their underlying profile of impairments also seems to selectively impact on certain components of mathematical ability.
2013-01-01
Background We have recently reported on the changes in plasma free amino acid (PFAA) profiles in lung cancer patients and the efficacy of a PFAA-based, multivariate discrimination index for the early detection of lung cancer. In this study, we aimed to verify the usefulness and robustness of PFAA profiling for detecting lung cancer using new test samples. Methods Plasma samples were collected from 171 lung cancer patients and 3849 controls without apparent cancer. PFAA levels were measured by high-performance liquid chromatography (HPLC)–electrospray ionization (ESI)–mass spectrometry (MS). Results High reproducibility was observed for both the change in the PFAA profiles in the lung cancer patients and the discriminating performance for lung cancer patients compared to previously reported results. Furthermore, multivariate discriminating functions obtained in previous studies clearly distinguished the lung cancer patients from the controls based on the area under the receiver-operator characteristics curve (AUC of ROC = 0.731 ~ 0.806), strongly suggesting the robustness of the methodology for clinical use. Moreover, the results suggested that the combinatorial use of this classifier and tumor markers improves the clinical performance of tumor markers. Conclusions These findings suggest that PFAA profiling, which involves a relatively simple plasma assay and imposes a low physical burden on subjects, has great potential for improving early detection of lung cancer. PMID:23409863
Inattentiveness and Language Abilities in Preschoolers: A Latent Profile Analysis.
Tambyraja, Sherine R; Rhoad-Drogalis, A; Khan, K S; Justice, L M; Sawyer, B E
2018-06-23
Growing evidence suggests that early symptoms of inattentiveness may affect the language development and academic success of young children. In the present study, we examined the extent to which profiles of inattentiveness and language could be discerned within a heterogeneous group of preschoolers attending early childhood special education programs (n = 461). Based on parent-reported observations of children's symptoms of inattentiveness and direct assessments of children's language skills (grammar, vocabulary, and narrative ability), three distinct profiles were identified. The three groups, representing levels of severity (at risk, almost average, above average), differed not only by their end of year performance, but also with respect to which their abilities changed over the course of the academic year. Children in the poorest performing profile had poorer mean scores in the spring of their preschool year on all measures, but exhibited patterns of gain that exceeded or equaled their peers in higher-performing groups, in the domains of vocabulary and grammar. Examination of subsequent kindergarten reading skills suggested that profile differences remained consistent. Findings underscore the associations between early symptoms of inattentiveness and language difficulties, and further indicate that these relations extend to the acquisition of early reading skills. Future research is needed to corroborate these findings with more robust measures of attention, and to understand the long-term associations between inattentiveness, language and literacy, and potential effects on these associations from early intervention.
Temperature control in a 30 stage, 5-cm Centrifugal Contactor Pilot Plant
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jack D. Law; Troy G. Garn; David H. Meikrantz
2009-09-01
Temperature profile testing was performed using a 30 stage 5-cm centrifugal contactor pilot plant. These tests were performed to evaluate the ability to control process temperature by adjusting feed solution temperatures. This would eliminate the need for complex jacketed heat exchanger installation on the centrifugal contactors. Thermocouples were installed on the inlet and outlets of each stage, as well as directly in the mixing zone of several of the contactor stages. Lamp oil, a commercially available alkane mixture of C14 to C18 chains, and tap water adjusted to pH 2 with nitric acid were the solution feeds for the temperaturemore » profile testing. Temperature data profiles for an array of total throughputs and contactor rpm values for both single-phase and two-phase systems were collected with selected profiles. The total throughput ranged from 0.5-1.4 L/min with rotor speeds from 3500-4000 rpm. Inlet solution temperatures ranging from ambient up to 50 °C were tested. Results of the two-phase temperature profile testing are detailed« less
SASS Applied to Optimum Work Roll Profile Selection in the Hot Rolling of Wide Steel
NASA Astrophysics Data System (ADS)
Nolle, Lars
The quality of steel strip produced in a wide strip rolling mill depends heavily on the careful selection of initial ground work roll profiles for each of the mill stands in the finishing train. In the past, these profiles were determined by human experts, based on their knowledge and experience. In previous work, the profiles were successfully optimised using a self-organising migration algorithm (SOMA). In this research, SASS, a novel heuristic optimisation algorithm that has only one control parameter, has been used to find the optimum profiles for a simulated rolling mill. The resulting strip quality produced using the profiles found by SASS is compared with results from previous work and the quality produced using the original profile specifications. The best set of profiles found by SASS clearly outperformed the original set and performed equally well as SOMA without the need of finding a suitable set of control parameters.
Wagner, Bridget K.; Clemons, Paul A.
2009-01-01
Discovering small-molecule modulators for thousands of gene products requires multiple stages of biological testing, specificity evaluation, and chemical optimization. Many cellular profiling methods, including cellular sensitivity, gene-expression, and cellular imaging, have emerged as methods to assess the functional consequences of biological perturbations. Cellular profiling methods applied to small-molecule science provide opportunities to use complex phenotypic information to prioritize and optimize small-molecule structures simultaneously against multiple biological endpoints. As throughput increases and cost decreases for such technologies, we see an emerging paradigm of using more information earlier in probe- and drug-discovery efforts. Moreover, increasing access to public datasets makes possible the construction of “virtual” profiles of small-molecule performance, even when multiplexed measurements were not performed or when multidimensional profiling was not the original intent. We review some key conceptual advances in small-molecule phenotypic profiling, emphasizing connections to other information, such as protein-binding measurements, genetic perturbations, and cell states. We argue that to maximally leverage these measurements in probe and drug discovery requires a fundamental connection to synthetic chemistry, allowing the consequences of synthetic decisions to be described in terms of changes in small-molecule profiles. Mining such data in the context of chemical structure and synthesis strategies can inform decisions about chemistry procurement and library development, leading to optimal small-molecule screening collections. PMID:19825513
Determination of accurate vertical atmospheric profiles of extinction and turbulence
NASA Astrophysics Data System (ADS)
Hammel, Steve; Campbell, James; Hallenborg, Eric
2017-09-01
Our ability to generate an accurate vertical profile characterizing the atmosphere from the surface to a point above the boundary layer top is quite rudimentary. The region from a land or sea surface to an altitude of 3000 meters is dynamic and particularly important to the performance of many active optical systems. Accurate and agile instruments are necessary to provide measurements in various conditions, and models are needed to provide the framework and predictive capability necessary for system design and optimization. We introduce some of the path characterization instruments and describe the first work to calibrate and validate them. Along with a verification of measurement accuracy, the tests must also establish each instruments performance envelope. Measurement of these profiles in the field is a problem, and we will present a discussion of recent field test activity to address this issue. The Comprehensive Atmospheric Boundary Layer Extinction/Turbulence Resolution Analysis eXperiment (CABLE/TRAX) was conducted late June 2017. There were two distinct objectives for the experiment: 1) a comparison test of various scintillometers and transmissometers on a homogeneous horizontal path; 2) a vertical profile experiment. In this paper we discuss only the vertical profiling effort, and we describe the instruments that generated data for vertical profiles of absorption, scattering, and turbulence. These three profiles are the core requirements for an accurate assessment of laser beam propagation.
Long term pavement performance directive : non-automated dipstick longitudinal measurement procedure
DOT National Transportation Integrated Search
1996-11-25
The following procedure for longitudinal profile measurements on LTPP test sections, using nonautomated Dipsticks, should be used on all test sections requiring manual measurement of the : longitudinal profile. This is a replacement for the procedure...
NASA Technical Reports Server (NTRS)
Ferrare, R. A.; Whiteman, D. N.; Melfi, S. H.; Goldsmith, J. E. M.; Bisson, S. E.; Lapp, M.
1991-01-01
We describe preliminary results from a comprehensive computer model developed to guide optimization of a Raman lidar system for measuring daytime profiles of atmospheric water vapor, emphasizing an ultraviolet, solar-blind approach.
Raouf, Joan; Idborg, Helena; Englund, Petter; Alexanderson, Helene; Dastmalchi, Maryam; Jakobsson, Per-Johan; Lundberg, Ingrid E; Korotkova, Marina
2018-05-02
Polymyositis (PM) and dermatomyositis (DM) are severe chronic autoimmune diseases, characterized by muscle fatigue and low muscle endurance. Conventional treatment includes high doses of glucocorticoids and immunosuppressive drugs; however, few patients recover full muscle function. One explanation of the persistent muscle weakness could be altered lipid metabolism in PM/DM muscle tissue as we previously reported. Using a targeted lipidomic approach we aimed to characterize serum lipid profiles in patients with PM/DM compared to healthy individuals (HI) in a cross-sectional study. Also, in the longitudinal study we compared serum lipid profiles in patients newly diagnosed with PM/DM before and after immunosuppressive treatment. Lipidomic profiles were analyzed in serum samples from 13 patients with PM/DM, 12 HI and 8 patients newly diagnosed with PM/DM before and after conventional immunosuppressive treatment using liquid chromatography tandem mass spectrometry (LC-MS/MS) and a gas-chromatography flame ionization detector (GC-FID). Functional Index (FI), as a test of muscle performance and serum levels of creatine kinase (s-CK) as a proxy for disease activity were analyzed. The fatty acid (FA) composition of total serum lipids was altered in patients with PM/DM compared to HI; the levels of palmitic (16:0) acid were significantly higher while the levels of arachidonic (20:4, n-6) acid were significantly lower in patients with PM/DM. The profiles of serum phosphatidylcholine and triacylglycerol species were changed in patients with PM/DM compared to HI, suggesting disproportionate levels of saturated and polyunsaturated FAs that might have negative effects on muscle performance. After immunosuppressive treatment the total serum lipid levels of eicosadienoic (20:2, n-6) and eicosapentaenoic (20:5, n-3) acids were increased and serum phospholipid profiles were altered in patients with PM/DM. The correlation between FI or s-CK and levels of several lipid species indicate the important role of lipid changes in muscle performance and inflammation. Serum lipids profiles are significantly altered in patients with PM/DM compared to HI. Moreover, immunosuppressive treatment in patients newly diagnosed with PM/DM significantly affected serum lipid profiles. These findings provide new evidence of the dysregulated lipid metabolism in patients with PM/DM that could possibly contribute to low muscle performance.
Patil, Ajeetkumar; Bhat, Sujatha; Pai, Keerthilatha M; Rai, Lavanya; Kartha, V B; Chidangil, Santhosh
2015-09-08
An ultra-sensitive high performance liquid chromatography-laser induced fluorescence (HPLC-LIF) based technique has been developed by our group at Manipal, for screening, early detection, and staging for various cancers, using protein profiling of clinical samples like, body fluids, cellular specimens, and biopsy-tissue. More than 300 protein profiles of different clinical samples (serum, saliva, cellular samples and tissue homogenates) from volunteers (normal, and different pre-malignant/malignant conditions) were recorded using this set-up. The protein profiles were analyzed using principal component analysis (PCA) to achieve objective detection and classification of malignant, premalignant and healthy conditions with high sensitivity and specificity. The HPLC-LIF protein profiling combined with PCA, as a routine method for screening, diagnosis, and staging of cervical cancer and oral cancer, is discussed in this paper. In recent years, proteomics techniques have advanced tremendously in life sciences and medical sciences for the detection and identification of proteins in body fluids, tissue homogenates and cellular samples to understand biochemical mechanisms leading to different diseases. Some of the methods include techniques like high performance liquid chromatography, 2D-gel electrophoresis, MALDI-TOF-MS, SELDI-TOF-MS, CE-MS and LC-MS techniques. We have developed an ultra-sensitive high performance liquid chromatography-laser induced fluorescence (HPLC-LIF) based technique, for screening, early detection, and staging for various cancers, using protein profiling of clinical samples like, body fluids, cellular specimens, and biopsy-tissue. More than 300 protein profiles of different clinical samples (serum, saliva, cellular samples and tissue homogenates) from healthy and volunteers with different malignant conditions were recorded by using this set-up. The protein profile data were analyzed using principal component analysis (PCA) for objective classification and detection of malignant, premalignant and healthy conditions. The method is extremely sensitive to detect proteins with limit of detection of the order of femto-moles. The HPLC-LIF combined with PCA as a potential proteomic method for the diagnosis of oral cancer and cervical cancer has been discussed in this paper. This article is part of a Special Issue entitled: Proteomics in India. Copyright © 2015 Elsevier B.V. All rights reserved.
Influence of ion-implanted profiles on the performance of GaAs MESFET's and MMIC amplifiers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pavlidis, D.; Cazaux, J.L.; Graffeuil, J.
1988-04-01
The RF small-signal performance of GaAs MESFET's and MMIC amplifiers as a function of various ion-implanted profiles is theoretically and experimentally investigated. Implantation energy, dose, and recess depth influence are theoretically analyzed with the help of a specially developed device simulator. The performance of MMIC amplifiers processed with various energies, doses, recess depths, and bias conditions is discussed and compared to experimental characteristics. Some criteria are finally proposed for the choice of implantation conditions and process in order to optimize the characteristics of ion-implanted FET's and to realize process-tolerant MMIC amplifiers.
Kiefl, Johannes; Cordero, Chiara; Nicolotti, Luca; Schieberle, Peter; Reichenbach, Stephen E; Bicchi, Carlo
2012-06-22
The continuous interest in non-targeted profiling induced the development of tools for automated cross-sample analysis. Such tools were found to be selective or not comprehensive thus delivering a biased view on the qualitative/quantitative peak distribution across 2D sample chromatograms. Therefore, the performance of non-targeted approaches needs to be critically evaluated. This study focused on the development of a validation procedure for non-targeted, peak-based, GC×GC-MS data profiling. The procedure introduced performance parameters such as specificity, precision, accuracy, and uncertainty for a profiling method known as Comprehensive Template Matching. The performance was assessed by applying a three-week validation protocol based on CITAC/EURACHEM guidelines. Optimized ¹D and ²D retention times search windows, MS match factor threshold, detection threshold, and template threshold were evolved from two training sets by a semi-automated learning process. The effectiveness of proposed settings to consistently match 2D peak patterns was established by evaluating the rate of mismatched peaks and was expressed in terms of results accuracy. The study utilized 23 different 2D peak patterns providing the chemical fingerprints of raw and roasted hazelnuts (Corylus avellana L.) from different geographical origins, of diverse varieties and different roasting degrees. The validation results show that non-targeted peak-based profiling can be reliable with error rates lower than 10% independent of the degree of analytical variance. The optimized Comprehensive Template Matching procedure was employed to study hazelnut roasting profiles and in particular to find marker compounds strongly dependent on the thermal treatment, and to establish the correlation of potential marker compounds to geographical origin and variety/cultivar and finally to reveal the characteristic release of aroma active compounds. Copyright © 2012 Elsevier B.V. All rights reserved.
Sub-microradian Surface Slope Metrology with the ALS Developmental Long Trace Profiler
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yashchuk, Valeriy V.; Barber, Samuel; Domning, Edward E.
2009-06-15
Development of X-ray optics for 3rd and 4th generation X-ray light sources with a level of surface slope precision of 0.1-0.2 {micro}rad requires the development of adequate fabrication technologies and dedicated metrology instrumentation and methods. Currently, the best performance of surface slope measurement has been achieved with the NOM (Nanometer Optical Component Measuring Machine) slope profiler at BESSY (Germany) [1] and the ESAD (Extended Shear Angle Difference) profiler at the PTB (Germany) [2]. Both instruments are based on electronic autocollimators (AC) precisely calibrated for the specific application [3] with small apertures of 2.5-5 mm in diameter. In the present work,more » we describe the design, initial alignment and calibration procedures, the instrumental control and data acquisition system, as well as the measurement performance of the Developmental Long Trace Profiler (DLTP) slope measuring instrument recently brought into operation at the Advanced Light Source (ALS) Optical Metrology Laboratory (OML). Similar to the NOM and ESAD, the DLTP is based on a precisely calibrated autocollimator. However, this is a reasonably low budget instrument used at the ALS OML for the development and testing of new measuring techniques and methods. Some of the developed methods have been implemented into the ALS LTP-II (slope measuring long trace profiler [4]) which was recently upgraded and has demonstrated a capability for 0.25 {micro}rad surface metrology [5]. Performance of the DLTP was verified via a number of measurements with high quality reference mirrors. A comparison with the corresponding results obtained with the world's best slope measuring instrument, the BESSY NOM, proves the accuracy of the DLTP measurements on the level of 0.1-0.2 {micro}rad depending on the curvature of a surface under test. The directions of future work to develop a surface slope measuring profiler with nano-radian performance are also discussed.« less
Willmes, K
1985-08-01
Methods for the analysis of a single subject's test profile(s) proposed by Huber (1973) are applied to the Aachen Aphasia Test (AAT). The procedures are based on the classical test theory model (Lord & Novick, 1968) and are suited for any (achievement) test with standard norms from a large standardization sample and satisfactory reliability estimates. Two test profiles of a Wernicke's aphasic, obtained before and after a 3-month period of speech therapy, are analyzed using inferential comparisons between (groups of) subtest scores on one test application and between two test administrations for single (groups of) subtests. For each of these comparisons, the two aspects of (i) significant (reliable) differences in performance beyond measurement error and (ii) the diagnostic validity of that difference in the reference population of aphasic patients are assessed. Significant differences between standardized subtest scores and a remarkably better preserved reading and writing ability could be found for both test administrations using the multiple test procedure of Holm (1979). Comparison of both profiles revealed an overall increase in performance for each subtest as well as changes in level of performance relations between pairs of subtests.
New Insights on Developmental Dyslexia Subtypes: Heterogeneity of Mixed Reading Profiles
Zoubrinetzky, Rachel; Bielle, Frédérique; Valdois, Sylviane
2014-01-01
We examined whether classifications based on reading performance are relevant to identify cognitively homogeneous subgroups of dyslexic children. Each of the 71 dyslexic participants was selected to have a mixed reading profile, i.e. poor irregular word and pseudo-word reading performance (accuracy and speed). Despite their homogeneous reading profile, the participants were found to split into four distinct cognitive subgroups, characterized by a single phonological disorder, a single visual attention span disorder, a double deficit or none of these disorders. The two subgroups characterized by single and contrasted cognitive disorders were found to exhibit a very similar reading pattern but more contrasted spelling performance (quantitative analysis). A qualitative analysis of the error types produced in reading and spelling provided some cues about the participants' underlying cognitive deficit. The overall findings disqualify subtyping based on reading profiles as a classification method to identify cognitively homogeneous subgroups of dyslexic children. They rather show an opaque relationship between the cognitive underpinnings of developmental dyslexia and their behavioral manifestations in reading and spelling. Future neuroimaging and genetic studies should take this issue into account since synthesizing over cognitively heterogeneous children would entail potential pitfalls. PMID:24918441
The effect of reactive ion etch (RIE) process conditions on ReRAM device performance
NASA Astrophysics Data System (ADS)
Beckmann, K.; Holt, J.; Olin-Ammentorp, W.; Alamgir, Z.; Van Nostrand, J.; Cady, N. C.
2017-09-01
The recent surge of research on resistive random access memory (ReRAM) devices has resulted in a wealth of different materials and fabrication approaches. In this work, we describe the performance implications of utilizing a reactive ion etch (RIE) based process to fabricate HfO2 based ReRAM devices, versus a more unconventional shadow mask fabrication approach. The work is the result of an effort to increase device yield and reduce individual device size. Our results show that choice of RIE etch gas (SF6 versus CF4) is critical for defining the post-etch device profile (cross-section), and for tuning the removal of metal layers used as bottom electrodes in the ReRAM device stack. We have shown that etch conditions leading to a tapered profile for the device stack cause poor electrical performance, likely due to metal re-deposition during etching, and damage to the switching layer. These devices exhibit nonlinear I-V during the low resistive state, but this could be improved to linear behavior once a near-vertical etch profile was achieved. Device stacks with vertical etch profiles also showed an increase in forming voltage, reduced switching variability and increased endurance.
Zhang, Xiaoya; Liu, Xutong; Jia, Hongmin; He, Pingli; Mao, Xiangbing; Qiao, Shiyan; Zeng, Xiangfang
2018-03-28
The objective of this study was to investigate whether valine (Val) supplementation in a reduced protein (RP) diet regulates growth performance associated with the changes in plasma amino acids (AAs) profile, metabolism, endocrine, and neural system in piglets. Piglets or piglets with a catheter in the precaval vein were randomly assigned to two treatments, including two RP diets with standardized ileal digestible (SID) Val:Lysine (Lys) ratio of 0.45 and 0.65, respectively. The results indicated that piglets in the higher Val:Lys ratio treatment had higher average daily feed intake (ADFI) ( P < 0.001), average daily gain (ADG) ( P = 0.001), feed conversion ratio (FCR) ( P = 0.004), lower plasma urea nitrogen ( P = 0.032), expression of gastric cholecystokinin (CCK), and hypothalamic pro-opiomelanocortin (POMC). Plasma AAs profiles including postprandial plasma essential AAs (EAAs) profile and in serum, muscle, and liver involved in metabolism of AAs and fatty acids were significantly different between two treatments. In conclusion, Val influenced growth performance associated with metabolism of AAs and fatty acids and both endocrine and neural system in piglets.
Does symbolism benefit environmental and business performance in the adoption of ISO 14001?
Ferrón-Vílchez, Vera
2016-12-01
Much research has focused on the organisational and reputational benefits of ISO 14001. However, less discussed is the symbolic adoption that some firms are implementing without experiencing significant reductions in environmental impacts. This work analyses the relationships between the different ISO 14001 adoption profiles (from symbolic profile to factual approach) and both environmental performance and profitability. These relationships are examined using a sample of 1214 manufacturing firms in 7 OECD countries while controlling for selection bias. The results suggest that only ISO 14001 adopters that monitor an extensive set of negative environmental impacts are associated with real improvements in both environmental performance and business performance. Copyright © 2016 Elsevier Ltd. All rights reserved.
Combined VHF Dopplar radar and airborne (CV-990) measurements of atmospheric winds on the mesoscale
NASA Technical Reports Server (NTRS)
Fairall, Christopher W.; Thomson, Dennis W.
1989-01-01
Hourly measurements of wind speed and direction obtained using two wind profiling Doppler radars during two prolonged jet stream occurrences over western Pennsylvania were analyzed. In particular, the time-variant characteristics of derived shear profiles were examined. To prevent a potential loss of structural detail and retain statistical significance, data from both radars were stratified into categories based on the location data from the Penn State radar were also compared to data from Pittsburgh radiosondes. Profiler data dropouts were studied in an attempt to determine possible reasons for the apparently reduced performance of profiling radars operating beneath a jet stream. Temperature profiles for the radar site were obtained using an interpolated temperature and dewpoint temperature sounding procedure developed at Penn State. The combination of measured wind and interpolated temperature profiles allowed Richardson number profiles to be generated for the profiler sounding volume. Both Richardson number and wind shear statistics were then examined along with pilot reports of turbulence in the vicinity of the profiler.
Quantification of smoothness index differences related to LTPP equipment type : tech brief.
DOT National Transportation Integrated Search
2006-07-01
Researchers in the Long-Term Pavement Performance : (LTPP) program are conducting a major data collection : effort. They are using an inertial profiler to collect longitudinal : profile data at regular intervals on two wheelpaths : located along the ...
ERIC Educational Resources Information Center
Brener, Nancy D.; Wechsler, Howell; McManus, Tim
2013-01-01
Background: School Health Profiles (Profiles) results help states understand how they compare to each other on specific school health policies and practices. The purpose of this study was to develop composite measures of critical Profiles results and use them to rate each state on their overall performance. Methods: Using data from state Profiles…
NASA Astrophysics Data System (ADS)
Martínez, J.; Rey, J.; Gutiérrez, L. M.; Novo, A.; Ortiz, A. J.; Alejo, M.; Galdón, J. M.
2015-12-01
The Giribaile archaeological site is one of the most important Iberian enclaves of the Alto Guadalquivir (Southern Spain). However, to date, only minimal excavation work has been performed at the site. Evaluation requires a preliminary, non-destructive general analysis to determine high-interest areas. This stage required a geophysical survey. Specifically, a 100 m2 grid was selected, where an initial campaign of nine electrical resistivity imaging (ERI) profiles was performed, where each profile was 111 m in length; these profiles were previously located using a detailed topographical survey. A total of 112 electrodes were used for each profile, spaced at 1 m apart with a Wenner-Schlumberger configuration. Secondly, 201 GPR profiles were created using a 500 MHz antenna. The 100 m long profiles were spaced 0.5 m apart and parallel to one another. The present research analyses the efficiency of each of these geophysical tools in supporting archaeological research. Using these methodologies, the position, morphology, and depth of different buried structures can be determined. 3D interpretation of the geophysical survey in 100 × 100 m grid allowed to differentiate structures square and rectangular, interesting buildings in a semicircle (interpreted as ovens) plus delineate different streets. From the geophysical survey follows the Carthaginian presence inside this ancient Iberian enclave.
The OMPS Limb Profiler instrument
NASA Astrophysics Data System (ADS)
Rault, D. F.; Xu, P.
2011-12-01
The Ozone Mapping and Profiler Suite (OMPS) will continue the monitoring of the global distribution of the Earth's middle atmosphere ozone and aerosol. OMPS is composed of three instruments, namely the Total Column Mapper (heritage: TOMS, OMI), the Nadir Profiler (heritage: SBUV) and the Limb Profiler (heritage: SOLSE/LORE, OSIRIS, SCIAMACHY, SAGE III). The ultimate goal of the mission is to better understand and quantify the rate of stratospheric ozone recovery. OMPS is scheduled to be launched on the NPOESS Preparatory Project (NPP) platform in October 2011. The focus of the paper will be on the Limb Profiler (LP) instrument. The LP instrument will measure the Earth's limb radiance, from which ozone profile will be retrieved from the upper tropopause uo to 60km. End-to-end studies of the sensor and retrieval algorithm indicate the following expected performance for ozone: accuracy of 5% or better from the tropopause up to 50 km, precision of about 3-5% from 18 to 50 km, and vertical resolution of 1.5-2 km with vertical sampling of 1 km and along-track horizontal sampling of 1 deg latitude. The paper will describe the mission, discuss the retrieval algorithm, and summarize the expected performance. If available, the paper will also present early on-orbit data.
Pre-clinical cognitive phenotypes for Alzheimer disease: a latent profile approach.
Hayden, Kathleen M; Kuchibhatla, Maragatha; Romero, Heather R; Plassman, Brenda L; Burke, James R; Browndyke, Jeffrey N; Welsh-Bohmer, Kathleen A
2014-11-01
Cognitive profiles for pre-clinical Alzheimer disease (AD) can be used to identify groups of individuals at risk for disease and better characterize pre-clinical disease. Profiles or patterns of performance as pre-clinical phenotypes may be more useful than individual test scores or measures of global decline. To evaluate patterns of cognitive performance in cognitively normal individuals to derive latent profiles associated with later onset of disease using a combination of factor analysis and latent profile analysis. The National Alzheimer Coordinating Centers collect data, including a battery of neuropsychological tests, from participants at 29 National Institute on Aging-funded Alzheimer Disease Centers across the United States. Prior factor analyses of this battery demonstrated a four-factor structure comprising memory, attention, language, and executive function. Factor scores from these analyses were used in a latent profile approach to characterize cognition among a group of cognitively normal participants (N = 3,911). Associations between latent profiles and disease outcomes an average of 3 years later were evaluated with multinomial regression models. Similar analyses were used to determine predictors of profile membership. Four groups were identified; each with distinct characteristics and significantly associated with later disease outcomes. Two groups were significantly associated with development of cognitive impairment. In post hoc analyses, both the Trail Making Test Part B, and a contrast score (Delayed Recall - Trails B), significantly predicted group membership and later cognitive impairment. Latent profile analysis is a useful method to evaluate patterns of cognition in large samples for the identification of preclinical AD phenotypes; comparable results, however, can be achieved with very sensitive tests and contrast scores. Copyright © 2014 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.
SU-F-T-179: Fast and Accurate Profile Acquisition for Proton Beam Using Multi-Ion Chamber Arrays
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, X; Zou, J; Chen, T
2016-06-15
Purpose: Proton beam profile measurement is more time-consuming than photon beam. Due to the energy modulation during proton delivery, chambers have to move step-by-step instead of continuously. Multi-ion chamber arrays are appealing to this task since multiple measurements can be performed at once. However, their utilization suffers from sparse spatial resolution and potential intrinsic volume-averaging effect of the disk-shaped ion chambers. We proposed an approach to measure proton beam profiles accurately and efficiently. Methods: Mevion S250 proton system and IBA Matrixx ion chamber arrays were used in this study. Matrixx has interchamber distance of 7.62 mm, and chamber diameter ofmore » 4.5 mm. We measured the same beam profile by moving the Matrixx seven times with 1 mm each time along y axis. All 7 measurements were superimposed to get a “finer” profile with 1 mm spatial resolution. Coarser resolution profiles of 2 mm and 3 mm were also generated by using subsets of measurements. Those profiles were compared to the TPS calculated beam profile. Gamma analysis was performed for 2D dose maps to evaluate the difference to TPS dose plane. Results: Preliminary results showed a large discrepancy between the TPS calculated profile and the single measurement profile with 7.6 mm resolution. A good match could be achieved when the resolution reduced to 3 mm by adding one extra measurement. Gamma analysis for 2D dose map of a 10×10 field showed a passing rate (γ ≤ 1) of 90.6% using a 3% and 3mm criterion for single measurement, which increased to 92.3% for 2-measurement superimposition, and slightly further increased to 92.9% for 7-measurement superimposition. Conclusion: The results indicated that 2 measurements shifted by 3mm using Matrixx generated a smooth proton beam profile with good matching to Eclipse beam profile. We suggest using this 2-measurement approach in clinic for double scattering proton beam profile measurement.« less
Profiling outcomes of ambulatory care: casemix affects perceived performance.
Berlowitz, D R; Ash, A S; Hickey, E C; Kader, B; Friedman, R; Moskowitz, M A
1998-06-01
The authors explored the role of casemix adjustment when profiling outcomes of ambulatory care. The authors reviewed the medical records of 656 patients with hypertension, diabetes, or chronic obstructive pulmonary disease (COPD) receiving care at one of three Department of Veterans Affairs medical centers. Outcomes included measures of physiological control for hypertension and diabetes, and of exacerbations for COPD. Predictors of poor outcomes, including physical examination findings, symptoms, and comorbidities, were identified and entered into regression models. Observed minus expected performance was described for each site, both before and after casemix adjustment. Risk-adjustment models were developed that were clinically plausible and had good performance properties. Differences existed among the three sites in the severity of the patients being cared for. For example, the percentage of patients expected to have poor blood pressure control were 35% at site 1, 37% at site 2, and 44% at site 3 (P < 0.01). Casemix-adjusted measures of performance were different from unadjusted measures. Sites that were outliers (P < 0.05) with one approach had observed performance no different from expected with another approach. Casemix adjustment models can be developed for outpatient medical conditions. Sites differ in the severity of patients they treat, and adjusting for these differences can alter judgments of site performance. Casemix adjustment is necessary when profiling outpatient medical conditions.
An occultation satellite system for determining pressure levels in the atmosphere
NASA Technical Reports Server (NTRS)
Ungar, S. G.; Lusignan, B. B.
1972-01-01
An operational two-satellite microwave occultation system will establish a pressure reference level to be used in fixing the temperature-pressure profile generated by the SIRS infrared sensor as a function of altitude. In the final error analysis, simulated data for the SIRS sensor were used to test the performance of the occultation system. The results of this analysis indicate that the occultation system is capable of measuring the altitude of the 300-mb level to within 24 mrms, given a maximum error of 2 K in the input temperature profile. The effects of water vapor can be corrected by suitable climatological profiles, and improvements in the accuracy of the SIRS instrument should yield additional improvements in the performance of the occultation system.
APPLICATION OF THE AERIAL PROFILING OF TERRAIN SYSTEM.
Cyran, Edward J.
1985-01-01
The U. S. Geological Survey has completed the performance evaluation flight tests of the Aerial Profiling of Terrain System (APTS) and is now performing a series of application tests to determine its effectiveness and efficiency as an earth-science data collection tool. These tests are designed to evaluate the APTS at such tasks as positioning water wells, testing reliability of older maps, measuring elevations of kettle ponds, and profiling stream valleys for flood studies. The results of three application tests in Massachusetts are discussed: positioning water wells and measuring elevations along the Charles River; testing four older 1:24,000-scale quadrangle maps in the Plymouth area; and measuring elevations of several hundred kettle ponds near the Cape Cod Canal.
Detonator Performance Characterization using Multi-Frame Laser Schlieren Imaging
NASA Astrophysics Data System (ADS)
Clarke, Steven; Landon, Colin; Murphy, Michael; Martinez, Michael; Mason, Thomas; Thomas, Keith
2009-06-01
Multi-frame Laser Schlieren Imaging of shock waves produced by detonators in transparent witness materials can be used to evaluate detonator performance. We use inverse calculations of the 2D propagation of shock waves in the EPIC finite element model computer code to calculate a temporal-spatial-pressure profile on the surface of the detonator that is consistent with the experimental shock waves from the schlieren imaging. Examples of calculated 2D temporal-spatial-pressure profiles from a range of detonator types (EFI --exploding foil initiators, DOI -- direct optical initiation, EBW -- exploding bridge wire, hotwire), detonator HE materials (PETN, HMX, etc), and HE densities. Also pressure interaction profiles from the interaction of multiple shock waves will be shown. LA-UR-09-00909.
NASA Astrophysics Data System (ADS)
Gebresellasie, K.; Shirokoff, J.; Lewis, J. C.
2012-12-01
X-ray line spectra profile fitting using Pearson VII, pseudo-Voigt and generalized Fermi functions was performed on asphalt binders prior to the calculation of aromaticity and crystallite size parameters. The effects of these functions on the results are presented and discussed in terms of the peak profile fit parameters, the uncertainties in calculated values that can arise owing to peak shape, peak features in the pattern and crystallite size according to the asphalt models (Yen, modified Yen or Yen-Mullins) and theories. Interpretation of these results is important in terms of evaluating the performance of asphalt binders widely used in the application of transportation systems (roads, highways, airports).
Interferometer Control of Optical Tweezers
NASA Technical Reports Server (NTRS)
Decker, Arthur J.
2002-01-01
This paper discusses progress in using spatial light modulators and interferometry to control the beam profile of an optical tweezers. The approach being developed is to use a spatial light modulator (SLM) to control the phase profile of the tweezers beam and to use a combination of the SLM and interferometry to control the intensity profile. The objective is to perform fine and calculable control of the moments and forces on a tip or tool to be used to manipulate and interrogate nanostructures. The performance of the SLM in generating multiple and independently controllable tweezers beams is also reported. Concurrent supporting research projects are mentioned and include tweezers beam scattering and neural-net processing of the interference patterns for control of the tweezers beams.
Numerical Assessment of Four-Port Through-Flow Wave Rotor Cycles with Passage Height Variation
NASA Technical Reports Server (NTRS)
Paxson, D. E.; Lindau, Jules W.
1997-01-01
The potential for improved performance of wave rotor cycles through the use of passage height variation is examined. A Quasi-one-dimensional CFD code with experimentally validated loss models is used to determine the flowfield in the wave rotor passages. Results indicate that a carefully chosen passage height profile can produce substantial performance gains. Numerical performance data are presented for a specific profile, in a four-port, through-flow cycle design which yielded a computed 4.6% increase in design point pressure ratio over a comparably sized rotor with constant passage height. In a small gas turbine topping cycle application, this increased pressure ratio would reduce specific fuel consumption to 22% below the un-topped engine; a significant improvement over the already impressive 18% reductions predicted for the constant passage height rotor. The simulation code is briefly described. The method used to obtain rotor passage height profiles with enhanced performance is presented. Design and off-design results are shown using two different computational techniques. The paper concludes with some recommendations for further work.
Exploring Game Performance in the National Basketball Association Using Player Tracking Data
Calleja-González, Julio; Jiménez Sáiz, Sergio; Schelling i del Alcázar, Xavi; Balciunas, Mindaugas
2015-01-01
Recent player tracking technology provides new information about basketball game performance. The aim of this study was to (i) compare the game performances of all-star and non all-star basketball players from the National Basketball Association (NBA), and (ii) describe the different basketball game performance profiles based on the different game roles. Archival data were obtained from all 2013-2014 regular season games (n = 1230). The variables analyzed included the points per game, minutes played and the game actions recorded by the player tracking system. To accomplish the first aim, the performance per minute of play was analyzed using a descriptive discriminant analysis to identify which variables best predict the all-star and non all-star playing categories. The all-star players showed slower velocities in defense and performed better in elbow touches, defensive rebounds, close touches, close points and pull-up points, possibly due to optimized attention processes that are key for perceiving the required appropriate environmental information. The second aim was addressed using a k-means cluster analysis, with the aim of creating maximal different performance profile groupings. Afterwards, a descriptive discriminant analysis identified which variables best predict the different playing clusters. The results identified different playing profile of performers, particularly related to the game roles of scoring, passing, defensive and all-round game behavior. Coaching staffs may apply this information to different players, while accounting for individual differences and functional variability, to optimize practice planning and, consequently, the game performances of individuals and teams. PMID:26171606
Exploring Game Performance in the National Basketball Association Using Player Tracking Data.
Sampaio, Jaime; McGarry, Tim; Calleja-González, Julio; Jiménez Sáiz, Sergio; Schelling I Del Alcázar, Xavi; Balciunas, Mindaugas
2015-01-01
Recent player tracking technology provides new information about basketball game performance. The aim of this study was to (i) compare the game performances of all-star and non all-star basketball players from the National Basketball Association (NBA), and (ii) describe the different basketball game performance profiles based on the different game roles. Archival data were obtained from all 2013-2014 regular season games (n = 1230). The variables analyzed included the points per game, minutes played and the game actions recorded by the player tracking system. To accomplish the first aim, the performance per minute of play was analyzed using a descriptive discriminant analysis to identify which variables best predict the all-star and non all-star playing categories. The all-star players showed slower velocities in defense and performed better in elbow touches, defensive rebounds, close touches, close points and pull-up points, possibly due to optimized attention processes that are key for perceiving the required appropriate environmental information. The second aim was addressed using a k-means cluster analysis, with the aim of creating maximal different performance profile groupings. Afterwards, a descriptive discriminant analysis identified which variables best predict the different playing clusters. The results identified different playing profile of performers, particularly related to the game roles of scoring, passing, defensive and all-round game behavior. Coaching staffs may apply this information to different players, while accounting for individual differences and functional variability, to optimize practice planning and, consequently, the game performances of individuals and teams.
A retrieval algorithm of hydrometer profile for submillimeter-wave radiometer
NASA Astrophysics Data System (ADS)
Liu, Yuli; Buehler, Stefan; Liu, Heguang
2017-04-01
Vertical profiles of particle microphysics perform vital functions for the estimation of climatic feedback. This paper proposes a new algorithm to retrieve the profile of the parameters of the hydrometeor(i.e., ice, snow, rain, liquid cloud, graupel) based on passive submillimeter-wave measurements. These parameters include water content and particle size. The first part of the algorithm builds the database and retrieves the integrated quantities. Database is built up by Atmospheric Radiative Transfer Simulator(ARTS), which uses atmosphere data to simulate the corresponding brightness temperature. Neural network, trained by the precalculated database, is developed to retrieve the water path for each type of particles. The second part of the algorithm analyses the statistical relationship between water path and vertical parameters profiles. Based on the strong dependence existing between vertical layers in the profiles, Principal Component Analysis(PCA) technique is applied. The third part of the algorithm uses the forward model explicitly to retrieve the hydrometeor profiles. Cost function is calculated in each iteration, and Differential Evolution(DE) algorithm is used to adjust the parameter values during the evolutionary process. The performance of this algorithm is planning to be verified for both simulation database and measurement data, by retrieving profiles in comparison with the initial one. Results show that this algorithm has the ability to retrieve the hydrometeor profiles efficiently. The combination of ARTS and optimization algorithm can get much better results than the commonly used database approach. Meanwhile, the concept that ARTS can be used explicitly in the retrieval process shows great potential in providing solution to other retrieval problems.
Willie, Tiara C; Chakrapani, Venkatesan; White Hughto, Jaclyn M; Kershaw, Trace S
2017-12-01
Globally, transgender women (TGW) experience multiple forms of victimization such as violence and discrimination that can place them at risk for poor sexual health. To date, research overlooks the heterogeneity in experiences of victimization among TGW. Furthermore, few studies have examined the association between victimization and sexual risk among TGW in India, despite the high burden of HIV and victimization in this community. Latent profile analysis was performed to identify patterns of victimization in a convenience sample of 299 TGW recruited from nongovernmental organizations across four states in India. Analysis of covariance was performed to examine differences in sexual risk (i.e., alcohol use before sex; inconsistent condom use with a male regular partner, a male causal partner, and a male paying partner; and having multiple sexual partners) between latent profiles. Five distinct profiles of Indian TGW were identified based on the type and severity of victimization: (1) Low victimization, (2) High verbal police victimization, (3) High verbal and physical police victimization, (4) Moderate victimization, and (5) High victimization. While controlling for age, education, income, HIV status, and marital status, results revealed that TGW in the moderate victimization and high victimization profiles had higher sexual risk than TGW in the low victimization and high verbal police victimization profiles. In addition, TGW in high verbal and physical police victimization profile had higher sexual risk than TGW in low victimization profile. These findings underscore the importance of tailoring sexual risk reduction interventions to the specific needs of TGW based on patterns of victimization.
Physical qualities and activity profiles of sub-elite and recreational Australian football players.
Stein, Josh G; Gabbett, Tim J; Townshend, Andrew D; Dawson, Brian T
2015-11-01
To investigate the relationship between physical qualities and match activity profiles of recreational Australian football players. Prospective cohort study. Forty players from three recreational Australian football teams (Division One, Two and Three) underwent a battery of fitness tests (vertical jump, 10 and 40 m sprint, 6 m × 30 m repeated sprint test, Yo-Yo intermittent recovery level Two and 2-km time trial). The activity profiles of competitive match-play were quantified using 10-Hz Global Positioning System units. Division One players possessed greater maximum velocity, Yo-Yo level Two and 2-km time trial performances than Division Two and Three players. In addition, Division One players covered greater relative distance, and relative distances at moderate- and high-intensities during match-play than Division Two and Three players. Division Two players had better 2-km time trial performances than Division Three players. Positive associations (P < 0.05) were found between 10 m acceleration, maximum velocity, Yo-Yo level Two and 2-km time trial performances and relative distance, and relative distances covered at moderate- and high-intensities during match-play. Moderate relationships were found between vertical jump and relative distance and high-intensity running. Sub-elite Australian football players competing at a higher level exhibit greater physical qualities and match-play activity profiles than lesser-skilled recreational players. Acceleration and maximum velocity, 2-km time trial and Yo-Yo level Two performances discriminate between players of different playing levels, and are related to physical match performance in recreational Australian football. The development of these qualities is likely to contribute to improved match performance in recreational Australian football players. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.
Profile Optimization Method for Robust Airfoil Shape Optimization in Viscous Flow
NASA Technical Reports Server (NTRS)
Li, Wu
2003-01-01
Simulation results obtained by using FUN2D for robust airfoil shape optimization in transonic viscous flow are included to show the potential of the profile optimization method for generating fairly smooth optimal airfoils with no off-design performance degradation.
Evaluation of the in-service safety performance of safety-shape and vertical concrete barriers.
DOT National Transportation Integrated Search
2011-12-16
Roadside concrete barriers have been widely used to protect errant motorists from hitting : roadside hazards or obstacles. Two concrete barrier profiles, vertical and safety-shape, have been used : for this purpose. The safety-shape profile has been ...
Status of Test and Analysis Plans For 915 MHz Wind Profiler Replacement Technology Assessment
NASA Technical Reports Server (NTRS)
Roberts, Barry C.; Barbre/Jacobs, BJ
2017-01-01
Evaluate the performance and output of instruments that could replace the current 915-MHz Doppler Radar Wind Profiler (DRWP) networks at the Eastern Range (ER) and Western Range (WR) over a three month (12 week) period.
Schmikli, Sándor L; de Vries, Wouter R; Brink, Michel S; Backx, Frank Jg
2012-11-01
To verify if in male elite junior soccer players a minimum 1-month performance decrease is accompanied by a mood profile and hormone levels typical of non-functional over-reaching (NFOR). A prospective case-control study using a monthly performance monitor with a standardised field test to detect the performance changes. Players with a performance decrease lasting at least 1 month were compared with control players without a performance decrease on mood scores and pre-exercise and postexercise levels of stress hormones. Sporting field and sports medical laboratory. Ninety-four young elite soccer players were monitored during the 2006-2008 seasons. Twenty-one players were invited to the laboratory, seven of whom showed a significant performance decrease. Performance change over time, scores on the profile of mood states and premaximal and postmaximal exercise serum levels of adrenocorticotropic hormone (ACTH), growth hormone (GH) and cortisol. Players with a performance decrease showed psychological and hormonal changes typical of the non-functional state of over-reaching. Scores were higher on depression and anger, whereas the resting GH levels and ACTH levels after maximal exercise were reduced. ACTH and GH were capable of classifying all but one player correctly as either NFOR or control. Performance-related criteria in field tests are capable of identifying players with worsened mood and adaptations of the endocrine system that fit the definition of NFOR. Performance, mood and hormone levels may therefore be considered as valid instruments to diagnose NFOR in young elite soccer players.
Assessment of the pharmacodynamics of intranasal, intravenous and oral scopolamine
NASA Technical Reports Server (NTRS)
Tietze, Karen J.
1990-01-01
Space motion sickness is an important issue in the space medical sciences program. One of the objectives of the ongoing clinical experimental protocol Pharmacokinetics of Intranasal Scopolamine in Normal Subjects is to evaluate the pharmacodynamics of scopolamine using salivary flow rate and pH profiles and cognitive performance tests as pharmacodynamic parameters. Normal volunteers collected saliva and performed the NTI Multiresource Performance Battery tests at designed time intervals to establish control saliva flow rates, salivary pH profiles, and the characteristics of the learning curve for the performance program under normal conditions. In the clinical part of the study, saliva samples and performance test scores are collected from healthy nonsmoking subjects after receiving a single 0.4 mg dose of either intranasal, intravenous, or oral scopolamine.
Automated AFM for small-scale and large-scale surface profiling in CMP applications
NASA Astrophysics Data System (ADS)
Zandiatashbar, Ardavan; Kim, Byong; Yoo, Young-kook; Lee, Keibock; Jo, Ahjin; Lee, Ju Suk; Cho, Sang-Joon; Park, Sang-il
2018-03-01
As the feature size is shrinking in the foundries, the need for inline high resolution surface profiling with versatile capabilities is increasing. One of the important areas of this need is chemical mechanical planarization (CMP) process. We introduce a new generation of atomic force profiler (AFP) using decoupled scanners design. The system is capable of providing small-scale profiling using XY scanner and large-scale profiling using sliding stage. Decoupled scanners design enables enhanced vision which helps minimizing the positioning error for locations of interest in case of highly polished dies. Non-Contact mode imaging is another feature of interest in this system which is used for surface roughness measurement, automatic defect review, and deep trench measurement. Examples of the measurements performed using the atomic force profiler are demonstrated.
NASA Technical Reports Server (NTRS)
Edwards, B. F.; Waligora, J. M.; Horrigan, D. J., Jr.
1985-01-01
This analysis was done to determine whether various decompression response groups could be characterized by the pooled nitrogen (N2) washout profiles of the group members, pooling individual washout profiles provided a smooth time dependent function of means representative of the decompression response group. No statistically significant differences were detected. The statistical comparisons of the profiles were performed by means of univariate weighted t-test at each 5 minute profile point, and with levels of significance of 5 and 10 percent. The estimated powers of the tests (i.e., probabilities) to detect the observed differences in the pooled profiles were of the order of 8 to 30 percent.
Rath, J J; Veluvolu, K C; Defoort, M
2014-01-01
The estimation of road excitation profile is important for evaluation of vehicle stability and vehicle suspension performance for autonomous vehicle control systems. In this work, the nonlinear dynamics of the active automotive system that is excited by the unknown road excitation profile are considered for modeling. To address the issue of estimation of road profile, we develop an adaptive supertwisting observer for state and unknown road profile estimation. Under Lipschitz conditions for the nonlinear functions, the convergence of the estimation error is proven. Simulation results with Ford Fiesta MK2 demonstrate the effectiveness of the proposed observer for state and unknown input estimation for nonlinear active suspension system.
Rath, J. J.; Veluvolu, K. C.; Defoort, M.
2014-01-01
The estimation of road excitation profile is important for evaluation of vehicle stability and vehicle suspension performance for autonomous vehicle control systems. In this work, the nonlinear dynamics of the active automotive system that is excited by the unknown road excitation profile are considered for modeling. To address the issue of estimation of road profile, we develop an adaptive supertwisting observer for state and unknown road profile estimation. Under Lipschitz conditions for the nonlinear functions, the convergence of the estimation error is proven. Simulation results with Ford Fiesta MK2 demonstrate the effectiveness of the proposed observer for state and unknown input estimation for nonlinear active suspension system. PMID:24683321
Atmospheric turbulence profiling with SLODAR using multiple adaptive optics wavefront sensors.
Wang, Lianqi; Schöck, Matthias; Chanan, Gary
2008-04-10
The slope detection and ranging (SLODAR) method recovers atmospheric turbulence profiles from time averaged spatial cross correlations of wavefront slopes measured by Shack-Hartmann wavefront sensors. The Palomar multiple guide star unit (MGSU) was set up to test tomographic multiple guide star adaptive optics and provided an ideal test bed for SLODAR turbulence altitude profiling. We present the data reduction methods and SLODAR results from MGSU observations made in 2006. Wind profiling is also performed using delayed wavefront cross correlations along with SLODAR analysis. The wind profiling analysis is shown to improve the height resolution of the SLODAR method and in addition gives the wind velocities of the turbulent layers.
Methods and tools for profiling and control of distributed systems
NASA Astrophysics Data System (ADS)
Sukharev, R.; Lukyanchikov, O.; Nikulchev, E.; Biryukov, D.; Ryadchikov, I.
2018-02-01
This article is devoted to the topic of profiling and control of distributed systems. Distributed systems have a complex architecture, applications are distributed among various computing nodes, and many network operations are performed. Therefore, today it is important to develop methods and tools for profiling distributed systems. The article analyzes and standardizes methods for profiling distributed systems that focus on simulation to conduct experiments and build a graph model of the system. The theory of queueing networks is used for simulation modeling of distributed systems, receiving and processing user requests. To automate the above method of profiling distributed systems the software application was developed with a modular structure and similar to a SCADA-system.
Altering the Speed Profiles of Wheelchair Rugby Players With Game-Simulation Drill Design.
Rhodes, James M; Mason, Barry S; Paulson, Thomas A W; Goosey-Tolfrey, Victoria L
2018-01-01
To examine the speed profiles of elite wheelchair rugby (WCR) players during game-simulation training drills of differing player number and shot-clock regulations. A secondary aim was to determine whether the profiles were further influenced by player classification. Eight elite WCR players (low-point n = 3, high-point n = 5) were monitored using a radio-frequency-based indoor tracking system during training sessions over a 5-mo period. Speed profiles were collected for 3 modified game-simulation drills-3-versus-3 drills (n = 8 observations), 30-s shot clock (n = 24 observations), and 15-s shot clock (n = 16 observations)-and were compared with regular game-simulation drills (4 vs 4, 40-s shot clock; n = 16 observations). Measures included mean and peak speed; exercise-intensity ratios, defined as the ratio of time spent performing at high and low speeds; and the number of high-speed activities performed. Compared with regular game-simulation drills, 3-versus-3 drills elicited a moderate increase in mean speed (6.3%; effect size [ES] = 0.7) and the number of high-speed activities performed (44.1%; ES = 1.1). Minimal changes in speed profiles were observed during the 30-s shot clock, although moderate to large increases in all measures were observed during the 15-s shot-clock drills. Classification-specific differences were further identified, with increased activity observed for high-point players during the 3-versus-3 drill and for low-point players during the 15-s shot clock. By reducing the number of players on court and the shot clock to 15 s, coaches can significantly increase elite WCR players' speed profiles during game-simulation drills.
Neuro- and social-cognitive clustering highlights distinct profiles in adults with anorexia nervosa.
Renwick, Beth; Musiat, Peter; Lose, Anna; DeJong, Hannah; Broadbent, Hannah; Kenyon, Martha; Loomes, Rachel; Watson, Charlotte; Ghelani, Shreena; Serpell, Lucy; Richards, Lorna; Johnson-Sabine, Eric; Boughton, Nicky; Treasure, Janet; Schmidt, Ulrike
2015-01-01
This study aimed to explore the neuro- and social-cognitive profile of a consecutive series of adult outpatients with anorexia nervosa (AN) when compared with widely available age and gender matched historical control data. The relationship between performance profiles, clinical characteristics, service utilization, and treatment adherence was also investigated. Consecutively recruited outpatients with a broad diagnosis of AN (restricting subtype AN-R: n = 44, binge-purge subtype AN-BP: n = 33 or Eating Disorder Not Otherwise Specified-AN subtype EDNOS-AN: n = 23) completed a comprehensive set of neurocognitive (set-shifting, central coherence) and social-cognitive measures (Emotional Theory of Mind). Data were subjected to hierarchical cluster analysis and a discriminant function analysis. Three separate, meaningful clusters emerged. Cluster 1 (n = 45) showed overall average to high average neuro- and social- cognitive performance, Cluster 2 (n = 38) showed mixed performance characterized by distinct strengths and weaknesses, and Cluster 3 (n = 17) showed poor overall performance (Autism Spectrum disorder (ASD) like cluster). The three clusters did not differ in terms of eating disorder symptoms, comorbid features or service utilization and treatment adherence. A discriminant function analysis confirmed that the clusters were best characterized by performance in perseveration and set-shifting measures. The findings suggest that considerable neuro- and social-cognitive heterogeneity exists in patients with AN, with a subset showing ASD-like features. The value of this method of profiling in predicting longer term patient outcomes and in guiding development of etiologically targeted treatments remains to be seen. © 2014 Wiley Periodicals, Inc.
NASA Technical Reports Server (NTRS)
Thomson, D. W.; Syrett, William J.; Fairall, C. W.
1991-01-01
In the first experiment, it was found that wind profilers are far better suited for the detailed examination of jet stream structure than are weather balloons. The combination of good vertical resolution with not previously obtained temporal resolution reveals structural details not seen before. Development of probability-derived shear values appears possible. A good correlation between pilot reports of turbulence and wind shear was found. In the second experiment, hourly measurements of wind speed and direction obtained using two wind profiling Doppler radars during two prolonged jet stream occurrences over western Pennsylvania were analyzed. In particular, the time-variant characteristics of derived shear profiles were examined. Profiler data dropouts were studied in an attempt to determine possible reasons for the apparently reduced performance of profiling radar operating beneath a jet stream. Richardson number and wind shear statistics were examined along with pilot reports of turbulence in the vicinity of the profiler.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dyer, J. A.
In preparation for the next revision of the E-Area Low-Level Waste Facility (LLWF) Performance Assessment (PA), a mass balance model was developed in Microsoft Excel to confirm correct implementation of intact- and subsided-area infiltration profiles for the proposed closure cap in the PORFLOW vadose-zone model. The infiltration profiles are based on the results of Hydrologic Evaluation of Landfill Performance (HELP) model simulations for both intact and subsided cases.
Performance evaluation of DNA copy number segmentation methods.
Pierre-Jean, Morgane; Rigaill, Guillem; Neuvial, Pierre
2015-07-01
A number of bioinformatic or biostatistical methods are available for analyzing DNA copy number profiles measured from microarray or sequencing technologies. In the absence of rich enough gold standard data sets, the performance of these methods is generally assessed using unrealistic simulation studies, or based on small real data analyses. To make an objective and reproducible performance assessment, we have designed and implemented a framework to generate realistic DNA copy number profiles of cancer samples with known truth. These profiles are generated by resampling publicly available SNP microarray data from genomic regions with known copy-number state. The original data have been extracted from dilutions series of tumor cell lines with matched blood samples at several concentrations. Therefore, the signal-to-noise ratio of the generated profiles can be controlled through the (known) percentage of tumor cells in the sample. This article describes this framework and its application to a comparison study between methods for segmenting DNA copy number profiles from SNP microarrays. This study indicates that no single method is uniformly better than all others. It also helps identifying pros and cons of the compared methods as a function of biologically informative parameters, such as the fraction of tumor cells in the sample and the proportion of heterozygous markers. This comparison study may be reproduced using the open source and cross-platform R package jointseg, which implements the proposed data generation and evaluation framework: http://r-forge.r-project.org/R/?group_id=1562. © The Author 2014. Published by Oxford University Press.
Tokuda, Junichi; Morikawa, Shigehiro; Dohi, Takeyoshi; Hata, Nobuhiko
2004-01-01
Image registration in magnetic resonance (MR) image-guided liver therapy enhances surgical guidance by fusing preoperative multimodality images with intraoperative images, or by fusing intramodality images to correlate serial intraoperative images to monitor the effect of therapy. The objective of this paper is to describe the application of navigator echo and projection profile matching to fast two-dimensional image registration for MR-guided liver therapy. We obtain navigator echoes along the read-out and phase-encoding directions by using modified gradient echo imaging. This registration is made possible by masking out the liver profile from the image and performing profile matching with cross-correlation or mutual information as similarity measures. The set of experiments include a phantom study with a 2.0-T experimental MR scanner, and a volunteer and a clinical study with a 0.5-T open-configuration MR scanner, and these evaluate the accuracy and effectiveness of this method for liver therapy. Both the phantom and volunteer study indicate that this method can perform registration in 34 ms with root-mean-square error of 1.6 mm when the given misalignment of a liver is 30 mm. The clinical studies demonstrate that the method can track liver motion of up to approximately 40 mm. Matching profiles with cross-correlation information perform better than with mutual information in terms of robustness and speed. The proposed image registration method has potential clinical impact on and advantages for MR-guided liver therapy.
Towards a Quality Assessment Method for Learning Preference Profiles in Negotiation
NASA Astrophysics Data System (ADS)
Hindriks, Koen V.; Tykhonov, Dmytro
In automated negotiation, information gained about an opponent's preference profile by means of learning techniques may significantly improve an agent's negotiation performance. It therefore is useful to gain a better understanding of how various negotiation factors influence the quality of learning. The quality of learning techniques in negotiation are typically assessed indirectly by means of comparing the utility levels of agreed outcomes and other more global negotiation parameters. An evaluation of learning based on such general criteria, however, does not provide any insight into the influence of various aspects of negotiation on the quality of the learned model itself. The quality may depend on such aspects as the domain of negotiation, the structure of the preference profiles, the negotiation strategies used by the parties, and others. To gain a better understanding of the performance of proposed learning techniques in the context of negotiation and to be able to assess the potential to improve the performance of such techniques a more systematic assessment method is needed. In this paper we propose such a systematic method to analyse the quality of the information gained about opponent preferences by learning in single-instance negotiations. The method includes measures to assess the quality of a learned preference profile and proposes an experimental setup to analyse the influence of various negotiation aspects on the quality of learning. We apply the method to a Bayesian learning approach for learning an opponent's preference profile and discuss our findings.
A Comparison of Modeled Pollutant Profiles With MOZAIC Aircraft Measurements
In this study, we use measurements performed under the MOZAIC program to evaluate vertical profiles of meteorological parameters, CO, and ozone that were simulated for the year 2006 with several versions of the WRF/CMAQ modeling system. Model updates, including WRF nudging strate...
Teaching Professions. FasTrak.
ERIC Educational Resources Information Center
Ohio State Dept. of Education, Columbus.
This document focuses on Ohio's need for a skilled workforce. It begins by introducing the Specialization Ohio Integrated Technical and Academic Competency (ITAC) profiles. Each Specialization ITAC represents a profile of the professional or occupational competencies deemed essential for a person to perform proficiently when graduating from the…
Tremblay, Karine N; Richer, Louis; Lachance, Lise; Côté, Alain
2010-01-01
Children with intellectual disabilities show deficits in cognitive abilities and adaptive behavior which increase the risk of psychopathological disorders. This exploratory study aims at delineating profiles of children based on their cognitive functioning and adaptive behaviors, and to compare them on psychopathological manifestations. A cognitive assessment and an evaluation of adaptive behaviors are conducted with 52 school-age children receiving services from a rehabilitation center for people with intellectual disabilities. Adaptive behaviors are evaluated by a special educator and a questionnaire concerning psychopathology is filled out by a parent and a teacher. Cluster analyses highlight three profiles among children: Performing, Uncooperative and Non-performing. They differ on cognitive functions, collaboration and in terms of practical abilities of adaptive behaviors. Chi-square tests show significant differences in social competences, but not in problematic behaviors, according to the viewpoint of parents and teachers. Potential explanations are provided to understand the absence of significant differences in problematic behaviors between the three profiles.
Transportable Rayleigh/Raman lidar for aerosol and water vapor profiling
NASA Astrophysics Data System (ADS)
Congeduti, Fernando; D'Aulerio, P.; Casadio, S.; Baldetti, P.; Belardinelli, F.
2001-01-01
A nighttime operating Raman/Rayleigh/Mie lidar system for the measurement of profiles of the water vapor mixing ratio and the aerosol backscatter ratio is described. The transmitter utilizes two laser beam at 532 nm and 355 nm from a Nd:YAG pulsed laser and the receiver consists of three Newtonian telescopes. Optical fibers carry the signal to the detectors. The system, which is installed in two containers, is transportable. Data are recorded with resolutions of 75-m in altitude and 1-min in time. Water vapor profiles from 200 m above the lidar altitude up to the upper troposphere and aerosol profiles form 500 m up to the lower stratosphere were obtained also at the lowest resolution. The lidar was deployed and used in the 'Target Area of the Lago Maggiore' during the MAP-SOP international campaign. Measurements taken during that campaign are reported to show the lidar performance. Improvements of the system by employing an array of nine 50-cm diameter telescopes are planned. These should effectively enhance the lidar performance.
Surface Composition of NiPd Alloys
NASA Technical Reports Server (NTRS)
Noebe, Ronald D.; Khalil, Joe; Bozzolo, Guillermo; Gray, Hugh R. (Technical Monitor)
2002-01-01
Surface segregation in Ni-Pd alloys has been studied using the BFS method for alloys. Not only does the method predict an oscillatory segregation profile but it also indicates that the number of Pd-enriched surface planes can vary as a function of orientation. The segregation profiles were computed as a function of temperature, crystal face, and composition. Pd enrichment of the first layer is observed in (111) and (100) surfaces, and enrichment of the top two layers occurs for (110) surfaces. In all cases, the segregation profile shows oscillations that are actually related to weak ordering tendencies in the bulk. An atom-by-atom analysis was performed to identify the competing mechanisms leading to the observed surface behaviors. Large-scale atomistic simulations were also performed to investigate the temperature dependence of the segregation profiles as well as for analysis of the bulk structures. Finally, the observed surface behaviors are discussed in relation to the bulk phase structure of Ni-Pd alloys, which exhibit a tendency to weakly order.
Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André
2015-03-01
This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice.
Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André
2015-01-01
This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice. PMID:25838891
STS-1 operational flight profile. Volume 3: Ascent, cycle 3
NASA Technical Reports Server (NTRS)
1980-01-01
The ascent opeational flight profile for the space transportation system 1 flight is designed (1) to limit the maximum undispersed dynamic pressure to 580 lb/sq ft, (2) to follow the design load indicator profiles where q alpha is a specified profile and q beta is desired to be as close to zero as passible, and (3) to maximize nominal and abort performance. Significant trajectory parameters achieved are presented. A maximum dynamic pressure of 575 lb/sq ft was achieved, a minimum q alpha of -2187 lb-deg/sq ft was achieved, and q beta was limited to approximately + or - 100 lb-deg/sq ft in the high q region of the trajectory. The trajectory performance allows a press to main engine cutoff capability with one space shuttle main engine out at 262 seconds ground elapsed time. The orbital maneuvering system burns achieve a final orbit of 150.9 x 149.9 x 149.8 n. mi. and the desired inclination of 40.3 degrees.
Diagnostic performance of the "MESACUP anti-Skin profile TEST".
Horváth, Orsolya N; Varga, Rita; Kaneda, Makoto; Schmidt, Enno; Ruzicka, Thomas; Sárdy, Miklós
2016-01-01
The "MESACUP anti-Skin profile TEST" is a new, commercially available ELISA kit to detect circulating IgG autoantibodies against desmoglein 1, desmoglein 3, BP180, BP230, and type VII collagen, both simultaneously and more rapidly than previous assays. The aim of this study was to evaluate the diagnostic accuracy of this kit for the diagnosis of pemphigus foliaceus, pemphigus vulgaris, bullous pemphigoid and epidermolysis bullosa acquisita. Dual-centre retrospective study in which 138 patients with autoimmune blistering diseases were compared to 40 controls Using the MESACUP anti-Skin profile TEST, both sensitivities and specificities for desmoglein 1, desmoglein 3, BP180, BP230, and type VII collagen autoantibodies were similar to those obtained using previous, specific ELISA systems and 88% of the results were concordant without any significant difference. The MESACUP anti-Skin profile TEST had a similar performance to previously produced ELISA systems. The novel kit can be used for rapid diagnosis of most common autoimmune blistering diseases and is especially suitable for identifying overlapping disorders.
Secondary metabolites profiles and antioxidant activities of germinated brown and red rice
NASA Astrophysics Data System (ADS)
Nurnaistia, Y.; Aisyah, S.; Munawaroh, H. S. H.; Zackiyah
2018-05-01
The research aims to investigate the effect of germination on the secondary metabolite profiles and antioxidant activity of brown and red rice. The germination was performed by using a simple laboratory-scale machine that was designed and optimized to provide conditions that support the germination process. The germination was carried out for 2 days in dark conditions at 26°C and 99% humidity. Analysis of the secondary metabolite profile of ungerminated and germinated rice was performed using LC-MS. The antioxidant activities of ungerminated and germinated rice were done by using DPPH method. The results showed that the profiles of secondary metabolites of brown and red rice changed after germination. Some peaks were found to be induced in the germinated rice. However, some peaks were also loss during germination. The antioxidant activity of brown rice was slightly increased due to the germination, from 11.2% to 22.5%. Meanwhile the antioxidant activity of red rice was decreased after germination, from 73.8% to 60.0%.
Riis, Margit L H; Lüders, Torben; Markert, Elke K; Haakensen, Vilde D; Nesbakken, Anne-Jorun; Kristensen, Vessela N; Bukholm, Ida R K
2012-01-01
Gene expression studies on breast cancer have generally been performed on tissue obtained at the time of surgery. In this study, we have compared the gene expression profiles in preoperative tissue (core needle biopsies) while tumor is still in its normal milieu to postoperative tissue from the same tumor obtained during surgery. Thirteen patients were included of which eleven had undergone sentinel node diagnosis procedure before operation. Microarray gene expression analysis was performed using total RNA from all the samples. Paired significance analysis of microarrays revealed 228 differently expressed genes, including several early response stress-related genes such as members of the fos and jun families as well as genes of which the expression has previously been associated with cancer. The expression profiles found in the analyses of breast cancer tissue must be evaluated with caution. Different profiles may simply be the result of differences in the surgical trauma and timing of when samples are taken and not necessarily associated with tumor biology.
Riis, Margit L. H.; Lüders, Torben; Markert, Elke K.; Haakensen, Vilde D.; Nesbakken, Anne-Jorun; Kristensen, Vessela N.; Bukholm, Ida R. K.
2012-01-01
Gene expression studies on breast cancer have generally been performed on tissue obtained at the time of surgery. In this study, we have compared the gene expression profiles in preoperative tissue (core needle biopsies) while tumor is still in its normal milieu to postoperative tissue from the same tumor obtained during surgery. Thirteen patients were included of which eleven had undergone sentinel node diagnosis procedure before operation. Microarray gene expression analysis was performed using total RNA from all the samples. Paired significance analysis of microarrays revealed 228 differently expressed genes, including several early response stress-related genes such as members of the fos and jun families as well as genes of which the expression has previously been associated with cancer. The expression profiles found in the analyses of breast cancer tissue must be evaluated with caution. Different profiles may simply be the result of differences in the surgical trauma and timing of when samples are taken and not necessarily associated with tumor biology. PMID:23227362
NASA Astrophysics Data System (ADS)
Lama, R.; Dahal, D. R.; Gautam, S.; Acharya, N.; Neopane, H.; Thapa, B. S.
2018-06-01
Francis turbine are ideal turbines for Himalayan and Andes region where both low and high-altitude mountains are located. Turbines operating in such regions face operational and maintenance problems due to the sediment erosion. In order to reduce the erosion effects on these components the design of components for higher sediment handling is essence. This paper presents performance analysis of Francis runner and prediction of sediment erosion on the runner blades for different operating conditions with different guide vane profiles. The simulations were carried out for 11 guide vane opening angles using Tabakoff erosion model. At full load and best efficiency point the erosion was localized at pressure side of runner blades outlet due to higher relative velocity. On the other hand, at part load condition, erosion was observed at suction side of the blades. Application of asymmetric guide vane profile NACA 4412 showed higher efficiency for all operating conditions with minimum erosion on runner blades in compare to symmetric guide vane profile NACA 0012.
On the study of wavy leading-edge vanes to achieve low fan interaction noise
NASA Astrophysics Data System (ADS)
Tong, Fan; Qiao, Weiyang; Xu, Kunbo; Wang, Liangfeng; Chen, Weijie; Wang, Xunnian
2018-04-01
The application of wavy leading-edge vanes to reduce a single-stage axial fan noise is numerically studied. The aerodynamic and acoustic performance of the fan is numerically investigated using a hybrid unsteady Reynolds averaged Navier-Stokes (URANS)/acoustic analogy method (Goldstein equations). First, the hybrid URANS/Goldstein method is developed and successfully validated against experiment results. Next, numerical simulations are performed to investigate the noise reduction effects of the wavy leading-edge vanes. The aerodynamic and acoustic performance is assessed for a fan with vanes equipped with two different wavy leading-edge profiles and compared with the performance of conventional straight leading-edge vanes. Results indicate that a fan with wavy leading-edge vanes produces lower interaction noise than the baseline fan without a significant loss in aerodynamic performance. In fact, it is demonstrated that wavy leading-edge vanes have the potential to lead to both aerodynamic and acoustic improvements. The two different wavy leading-edge profiles are shown to successfully reduce the fan tone sound power level by 1.2 dB and 4.3 dB, respectively. Fan efficiency is also improved by about 1% with one of the tested wavy leading-edge profiles. Large eddy simulation (LES) is also performed for a simplified fan stage model to assess the effects of wavy leading-edge vanes on the broadband fan noise. Results indicate that the overall sound power level of a fan can be reduced by about 4 dB with the larger wavy leading-edge profile. Finally, the noise reduction mechanisms are investigated and analysed. It is found that the wavy leading-edge profiles can induce significant streamwise vorticity around the leading-edge protuberances and reduce pressure fluctuations (especially at locations of wavy leading-edge hills) and unsteady forces on the stator vanes. The underlying mechanism of the reduced pressure fluctuations is also discussed by examining the magnitude-squared coherence between the velocity and pressure fluctuations in the vicinity of the noise sources. Moreover, a reduction in the correlation level of the wall pressure fluctuations along the vane leading-edge is observed, as well as destructive phase interference along the vane leading-edge.
NASA Technical Reports Server (NTRS)
Chu, W. P.
1977-01-01
Spacecraft remote sensing of stratospheric aerosol and ozone vertical profiles using the solar occultation experiment has been analyzed. A computer algorithm has been developed in which a two step inversion of the simulated data can be performed. The radiometric data are first inverted into a vertical extinction profile using a linear inversion algorithm. Then the multiwavelength extinction profiles are solved with a nonlinear least square algorithm to produce aerosol and ozone vertical profiles. Examples of inversion results are shown illustrating the resolution and noise sensitivity of the inversion algorithms.
1979-02-01
A 0 ’A099 7 1 3 tAU N A E R O S P A C E C O R P B E T H P A G E N Y F / 6 ~ ~ i DEVELOPMENT OF ENVIRONMENTAL. PROFILES FOR TESTING EQUIPMENT...IHIlia- ’ -Q IIIII.L25 MICROCOPY RESOLUTION’ TEST CHART C RMS-9-R-1 DEVELOPMENT OF ENVIRONMENTAL PROFILES FOR TESTING EQUIPMENT INSTALLED IN NAVAL... Development of Environmental Profiles for Testing ,’~ Final j quipment Installed in Naval Aircraft (Fixed Wing), e 7- e* 8 S. PERFORMING ORGANIZATION
Moreira, Alexandre; Massa, Marcelo; Thiengo, Carlos R; Rodrigues Lopes, Rafael Alan; Lima, Marcelo R; Vaeyens, Roel; Barbosa, Wesley P; Aoki, Marcelo S
2017-12-01
The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs). Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale), and physical performance tests (Yo-Yo and vertical jumps) were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions) from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R 2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77), while testosterone presented the highest structure coefficient (0.75) for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players.
Tian, Weidong; Zhang, Lan V; Taşan, Murat; Gibbons, Francis D; King, Oliver D; Park, Julie; Wunderlich, Zeba; Cherry, J Michael; Roth, Frederick P
2008-01-01
Background: Learning the function of genes is a major goal of computational genomics. Methods for inferring gene function have typically fallen into two categories: 'guilt-by-profiling', which exploits correlation between function and other gene characteristics; and 'guilt-by-association', which transfers function from one gene to another via biological relationships. Results: We have developed a strategy ('Funckenstein') that performs guilt-by-profiling and guilt-by-association and combines the results. Using a benchmark set of functional categories and input data for protein-coding genes in Saccharomyces cerevisiae, Funckenstein was compared with a previous combined strategy. Subsequently, we applied Funckenstein to 2,455 Gene Ontology terms. In the process, we developed 2,455 guilt-by-profiling classifiers based on 8,848 gene characteristics and 12 functional linkage graphs based on 23 biological relationships. Conclusion: Funckenstein outperforms a previous combined strategy using a common benchmark dataset. The combination of 'guilt-by-profiling' and 'guilt-by-association' gave significant improvement over the component classifiers, showing the greatest synergy for the most specific functions. Performance was evaluated by cross-validation and by literature examination of the top-scoring novel predictions. These quantitative predictions should help prioritize experimental study of yeast gene functions. PMID:18613951
Demers, Hendrix; Ramachandra, Ranjan; Drouin, Dominique; de Jonge, Niels
2012-01-01
Lateral profiles of the electron probe of scanning transmission electron microscopy (STEM) were simulated at different vertical positions in a micrometers-thick carbon sample. The simulations were carried out using the Monte Carlo method in the CASINO software. A model was developed to fit the probe profiles. The model consisted of the sum of a Gaussian function describing the central peak of the profile, and two exponential decay functions describing the tail of the profile. Calculations were performed to investigate the fraction of unscattered electrons as function of the vertical position of the probe in the sample. Line scans were also simulated over gold nanoparticles at the bottom of a carbon film to calculate the achievable resolution as function of the sample thickness and the number of electrons. The resolution was shown to be noise limited for film thicknesses less than 1 μm. Probe broadening limited the resolution for thicker films. The validity of the simulation method was verified by comparing simulated data with experimental data. The simulation method can be used as quantitative method to predict STEM performance or to interpret STEM images of thick specimens. PMID:22564444
Performance of SMA-reinforced composites in an aerodynamic profile
NASA Astrophysics Data System (ADS)
Simpson, John; Boller, Christian
2002-07-01
Within the European collaborative applied fundamental research project ADAPT, fundamentals of SMA-reinforced composites were evaluated and the specific manufacturing techniques for these composites developed and realised. The involved partners are listed at the end. To demonstrate applicability of these composites a realistically scaled aerodynamic profile of around 0.5m span by 0.5m root chord was designed, manufactured and assembled. The curved skins were manufactured as SMA composites with two layers of SMA-wires integrated into the layup of aramid fibre prepregs. All SMA wires were connected such that they can be operated as individual sets of wires and at low voltages, similar to the conditions for electrical energy generation in a real aircraft. The profile was then mounted on a vibration test rig and activated and excited by a shaker at its tip which allowed to test the dynamic performance of the profile under different external loading conditions with various internal actuation conditions through the SMA wires. The paper includes some background of the design and manufacturing of the aerodynamic profile and will discuss some of the results determined recently on the test rig. A view with regard to future wind tunnel testing will be given as well.
NASA Astrophysics Data System (ADS)
Oh, Jaechul; Weaver, J. L.; Phillips, L.; Obenschain, S. P.; Schmitt, A. J.; Kehne, D. M.; Chan, L.-Y.; Serlin, V.
2011-10-01
Previous experiments with Nike KrF laser (λ = 248 nm , Δν ~ 1 THz) observed LPI signatures near quarter critical density (nc / 4) in CH plasmas, however, detailed measurement of the temperature (Te) and density (ne) profiles was missing. The current Nike LPI campaign will perform experimental determination of the plasma profiles. A side-on grid imaging refractometer (GIR) is the main diagnostic to resolve Te and ne in space taking 2D snapshots of probe laser (λ = 266 nm , Δt = 8 psec) beamlets (50 μm spacing) refracted by the plasma at laser peak time. Ray tracing of the beamlets through hydrodynamically simulated (FASTRAD3D) plasma profiles estimates the refractometer may access densities up to ~ 0 . 2nc . With the measured Te and ne profiles in the plasma corona, we will discuss analysis of light data radiated from the plasmas in spectral ranges relevant to two plasmon decay and convective Raman instabilities. Validity of the (Te ,ne) data will also be discussed for the thermal transport study. Work supported by DoE/NNSA and ONR and performed at NRL.
Ali, Taha A; Shehata, Mohamed I; Mohamed, Nazmi A
2015-06-01
In this work, fiber Bragg grating (FBG) strain sensors in single and quasi-distributed systems are investigated, seeking high-accuracy measurement. Since FBG-based strain sensors of small lengths are preferred in medical applications, and that causes the full width at half-maximum (FWHM) to be larger, a new apodization profile is introduced for the first time, to the best of our knowledge, with a remarkable FWHM at small sensor lengths compared to the Gaussian and Nuttall profiles, in addition to a higher mainlobe slope at these lengths. A careful selection of apodization profiles with detailed investigation is performed-using sidelobe analysis and the FWHM, which are primary judgment factors especially in a quasi-distributed configuration. A comparison between the elite selection of apodization profiles (extracted from related literature) and the proposed new profile is carried out covering the reflectivity peak, FWHM, and sidelobe analysis. The optimization process concludes that the proposed new profile with a chosen small length (L) of 10 mm and Δnac of 1.4×10-4 is the optimum choice for single stage and quasi-distributed strain-sensor networks, even better than the Gaussian profile at small sensor lengths. The proposed profile achieves the smallest FWHM of 15 GHz (suitable for UDWDM), and the highest mainlobe slope of 130 dB/nm. For the quasi-distributed scenario, a noteworthy high isolation of 6.953 dB is achieved while applying a high strain value of 1500 μstrain (με) for a five-stage strain-sensing network. Further investigation was undertaken, proving that consistency in choosing the apodization profile in the quasi-distributed network is mandatory. A test was made of the inclusion of a uniform apodized sensor among other apodized sensors with the proposed profile in an FBG strain-sensor network.
Current Perspectives on Profiling and Enhancing Wheelchair Court Sport Performance.
Paulson, Thomas; Goosey-Tolfrey, Victoria
2017-03-01
Despite the growing interest in Paralympic sport, the evidence base for supporting elite wheelchair sport performance remains in its infancy when compared with able-bodied (AB) sport. Subsequently, current practice is often based on theory adapted from AB guidelines, with a heavy reliance on anecdotal evidence and practitioner experience. Many principles in training prescription and performance monitoring with wheelchair athletes are directly transferable from AB practice, including the periodization and tapering of athlete loads around competition, yet considerations for the physiological consequences of an athlete's impairment and the interface between athlete and equipment are vital when targeting interventions to optimize in-competition performance. Researchers and practitioners are faced with the challenge of identifying and implementing reliable protocols that detect small but meaningful changes in impairment-specific physical capacities and on-court performance. Technologies to profile both linear and rotational on-court performance are an essential component of sport-science support to understand sport-specific movement profiles and prescribe training intensities. In addition, an individualized approach to the prescription of athlete training and optimization of the "wheelchair-user interface" is required, accounting for an athlete's anthropometrics, sports classification, and positional role on court. In addition to enhancing physical capacities, interventions must focus on the integration of the athlete and his or her equipment, as well as techniques for limiting environmental influence on performance. Taken together, the optimization of wheelchair sport performance requires a multidisciplinary approach based on the individual requirements of each athlete.
Propulsive performance of pitching foils with variable chordwise flexibility
NASA Astrophysics Data System (ADS)
Zeyghami, Samane; Moored, Keith; Lehigh University Team
2017-11-01
Many swimming and flying animals propel themselves efficiently through water by oscillating flexible fins. These fins are not homogeneously flexible, but instead their flexural stiffness varies along their chord and span. Here we seek to evaluate the effect stiffness profile on the propulsive performance of pitching foils. Stiffness profile characterizes the variation in the local fin stiffness along the chord. To this aim, we developed a low order model of a functionally-graded material where the chordwise flexibility is modeled by two torsional springs along the chordline and the stiffness and location of the springs can be varied arbitrarily. The torsional spring structural model is then strongly coupled to a boundary element fluid model to simulate the fluid-structure interactions. Keeping the leading edge kinematics unchanged, we alter the stiffness profile of the foil and allow it to swim freely in response to the resulting hydrodynamic forces. We then detail the dependency of the hydrodynamic performance and the wake structure to the variations in the local structural properties of the foil.
Gilles, L; Ellerbroek, B L
2010-11-01
Real-time turbulence profiling is necessary to tune tomographic wavefront reconstruction algorithms for wide-field adaptive optics (AO) systems on large to extremely large telescopes, and to perform a variety of image post-processing tasks involving point-spread function reconstruction. This paper describes a computationally efficient and accurate numerical technique inspired by the slope detection and ranging (SLODAR) method to perform this task in real time from properly selected Shack-Hartmann wavefront sensor measurements accumulated over a few hundred frames from a pair of laser guide stars, thus eliminating the need for an additional instrument. The algorithm is introduced, followed by a theoretical influence function analysis illustrating its impulse response to high-resolution turbulence profiles. Finally, its performance is assessed in the context of the Thirty Meter Telescope multi-conjugate adaptive optics system via end-to-end wave optics Monte Carlo simulations.
Comparison of two procedures for predicting rocket engine nozzle performance
NASA Technical Reports Server (NTRS)
Davidian, Kenneth J.
1987-01-01
Two nozzle performance prediction procedures which are based on the standardized JANNAF methodology are presented and compared for four rocket engine nozzles. The first procedure required operator intercedence to transfer data between the individual performance programs. The second procedure is more automated in that all necessary programs are collected into a single computer code, thereby eliminating the need for data reformatting. Results from both procedures show similar trends but quantitative differences. Agreement was best in the predictions of specific impulse and local skin friction coefficient. Other compared quantities include characteristic velocity, thrust coefficient, thrust decrement, boundary layer displacement thickness, momentum thickness, and heat loss rate to the wall. Effects of wall temperature profile used as an input to the programs was investigated by running three wall temperature profiles. It was found that this change greatly affected the boundary layer displacement thickness and heat loss to the wall. The other quantities, however, were not drastically affected by the wall temperature profile change.
Pirsiavash, Ali; Broumandan, Ali; Lachapelle, Gérard
2017-07-05
The performance of Signal Quality Monitoring (SQM) techniques under different multipath scenarios is analyzed. First, SQM variation profiles are investigated as critical requirements in evaluating the theoretical performance of SQM metrics. The sensitivity and effectiveness of SQM approaches for multipath detection and mitigation are then defined and analyzed by comparing SQM profiles and multipath error envelopes for different discriminators. Analytical discussions includes two discriminator strategies, namely narrow and high resolution correlator techniques for BPSK(1), and BOC(1,1) signaling schemes. Data analysis is also carried out for static and kinematic scenarios to validate the SQM profiles and examine SQM performance in actual multipath environments. Results show that although SQM is sensitive to medium and long-delay multipath, its effectiveness in mitigating these ranges of multipath errors varies based on tracking strategy and signaling scheme. For short-delay multipath scenarios, the multipath effect on pseudorange measurements remains mostly undetected due to the low sensitivity of SQM metrics.
Antibiotic profiles of bacteria isolated on selective campylobacter media
USDA-ARS?s Scientific Manuscript database
The objective of this study was to determine antibiotic profiles of non-Campylobacter bacteria recovered on selective Campylobacter media. Broiler carcasses were obtained from a processing facility, and whole-carcass rinses were performed by shaking carcasses in plastic bags with 200 mL of distilled...
We have performed for the first time a comprehensive profiling of changes in protein expression of soluble proteins in livers from mice treated with the mouse liver tumorigen, propiconazole, to uncover the pathways and networks altered by this fungicide. Utilizing twodimensional...
Healthcare managers' leadership profiles in relation to perceptions of work stressors and stress.
Lornudd, Caroline; Bergman, David; Sandahl, Christer; von Thiele Schwarz, Ulrica
2016-05-03
Purpose The purpose of this study is to investigate the relationship between leadership profiles and differences in managers' own levels of work stress symptoms and perceptions of work stressors causing stress. Design/methodology/approach Cross-sectional data were used. Healthcare managers ( n = 188) rated three dimensions of their leadership behavior and levels of work stressors and stress. Hierarchical cluster analysis was performed to identify leadership profiles based on leadership behaviors. Differences in stress-related outcomes between profiles were assessed using one-way analysis of variance. Findings Four distinct clusters of leadership profiles were found. They discriminated in perception of work stressors and stress: the profile distinguished by the lowest mean in all behavior dimensions, exhibited a pattern with significantly more negative ratings compared to the other profiles. Practical implications This paper proposes that leadership profile is an individual factor involved in the stress process, including work stressors and stress, which may inform targeted health promoting interventions for healthcare managers. Originality/value This is the first study to investigate the relationship between leadership profiles and work stressors and stress in healthcare managers.
Wind measurements by electromagnetic probes
NASA Technical Reports Server (NTRS)
Susko, Michael
1989-01-01
The operation and performance characteristics of the Marshall Space Flight Center's Radar Wind Profiler, designed to provide measurement of the wind in the troposphere, are discussed. The Radar Wind Profiler uses a technology similar to that used in conventional Doppler radar systems, except the frequency is generally lower, antenna is larger, and dwell time is much longer. Its primary function is to monitor the vertical wind profile prior to launch of the Space Shuttle at more frequency intervals and nearer to launch time than is presently possible with the conventional balloon systems. A new wind profile will be obtained on the order of every 15 min based on an average of five wind profiles measured every 3 min at a height interval of 150 m to 20 km. The most significant features of the Radar Wind Profiler are the continuity in time and reliability.
NASA Technical Reports Server (NTRS)
Petri, K.; Salik, A.; Cooney, J.
1986-01-01
A report is given of measurements of atmospheric profiles of water vapor in the boundary layer by use of solar blind Raman lidar. These measurement episodes, occuring twice a day over a two week period, were accompanied by a dense net of supporting measurements. The support included two radiosonde launches per measurement episodes as well as a kytoon support measurement of water vapor using a wet bulb-dry bulb instrument. The kytoon strategy included ten minute stops at strategic altitudes. Additional kytoon measurements included ozone profiles and nephelometric extinction profiles in the visible. Typically, six or seven 1000 shot lidar profile averages were collected during a measurement episode. Overall performance comparisons are provided and intercomparisons between auxiliary measurement devices are presented. Data on the accuracy of the lidar water vapor profiles are presented.
NASA Astrophysics Data System (ADS)
Karaya, Y.; Mallikarjuna, J. M.
2017-09-01
Gasoline direct injection (GDI) engines have gained popularity in the recent times because of lower fuel consumption and exhaust emissions. But in these engines, the mixture preparation plays an important role which affects combustion, performance and emission characteristics. The mixture preparation in turn depends mainly upon combustion chamber geometry. Therefore, in this study, an attempt has been made to understand the effect of piston profile on the performance and emission characteristics in a GDI engine. The analysis is carried out on a four-stroke wall guided GDI engine using computational fluid dynamics (CFD). The spray breakup model used is validated with the available experimental results from the literature to the extent possible. The analysis is carried out for four piston profiles viz., offset pentroof with offset bowl (OPOB), flat piston with offset bowl (FPOB), offset pentroof with offset scoop (OPOS) and inclined piston with offset bowl (IPOB) fitted in an engine equipped with a six-hole injector with the split injection ratio of 30:70. All the CFD simulations are carried out at the engine speed of 2000 rev/min., with the overall equivalence ratio of about 0.65±0.05. The performance and emission characteristics of the engine are compared while using the above piston profiles. It is found that, the OPOB piston is preferred compared to that of the other pistons because it has better in-cylinder flow, IMEP and lower HC emissions compared to that of other pistons.
Samouei, Rahele; Fooladvand, Maryam; Janghorban, Shahla; Khorvash, Fariba
2015-01-01
The issue of students' academic failure is one of the most important educational, economic, and social issues. Cognizance of the factors related to academic downfall is so efficient in its prevention and control and leads to protecting governmental assets and labor force. In order to achieve this goal, this study intends to determine the predictive factors of the students' academic performance in Isfahan University of Medical Sciences in terms of their personality profile, mental health, and their demographic characteristics. This study was a descriptive-correlation study on 771 students who entered Isfahan University of Medical Sciences between 2005 and 2007. The information was gathered through using the students' educational and clinical files (for measuring personality characteristics and mental health) and SAMA Software (To get the mean scores). Minnesota Multiphasic Personality Inventory short form and General Health Questionnaire were used for collecting clinical data. The data were analyzed using SPSS 15 (stepwise regression coefficient, variance analysis, Student's t-test, and Spearman correlation coefficient). The results showed that the aforementioned students obtained a normal average for their personality profile and mental health indicators. Of all the reviewed variables, education, age, gender, depression, and hypochondria were the predictive factors of the students' educational performance. It could be concluded that some of the personality features, mental health indicators, and personality profile play such a significant role in the students' educational life that the disorder in any of them affects the students' educational performance and academic failure.
Logotheti, Marianthi; Papadodima, Olga; Venizelos, Nikolaos; Chatziioannou, Aristotelis; Kolisis, Fragiskos
2013-01-01
Schizophrenia affecting almost 1% and bipolar disorder affecting almost 3%–5% of the global population constitute two severe mental disorders. The catecholaminergic and the serotonergic pathways have been proved to play an important role in the development of schizophrenia, bipolar disorder, and other related psychiatric disorders. The aim of the study was to perform and interpret the results of a comparative genomic profiling study in schizophrenic patients as well as in healthy controls and in patients with bipolar disorder and try to relate and integrate our results with an aberrant amino acid transport through cell membranes. In particular we have focused on genes and mechanisms involved in amino acid transport through cell membranes from whole genome expression profiling data. We performed bioinformatic analysis on raw data derived from four different published studies. In two studies postmortem samples from prefrontal cortices, derived from patients with bipolar disorder, schizophrenia, and control subjects, have been used. In another study we used samples from postmortem orbitofrontal cortex of bipolar subjects while the final study was performed based on raw data from a gene expression profiling dataset in the postmortem superior temporal cortex of schizophrenics. The data were downloaded from NCBI's GEO datasets. PMID:23554570
Advances in Engineering Software for Lift Transportation Systems
NASA Astrophysics Data System (ADS)
Kazakoff, Alexander Borisoff
2012-03-01
In this paper an attempt is performed at computer modelling of ropeway ski lift systems. The logic in these systems is based on a travel form between the two terminals, which operates with high capacity cabins, chairs, gondolas or draw-bars. Computer codes AUTOCAD, MATLAB and Compaq-Visual Fortran - version 6.6 are used in the computer modelling. The rope systems computer modelling is organized in two stages in this paper. The first stage is organization of the ground relief profile and a design of the lift system as a whole, according to the terrain profile and the climatic and atmospheric conditions. The ground profile is prepared by the geodesists and is presented in an AUTOCAD view. The next step is the design of the lift itself which is performed by programmes using the computer code MATLAB. The second stage of the computer modelling is performed after the optimization of the co-ordinates and the lift profile using the computer code MATLAB. Then the co-ordinates and the parameters are inserted into a program written in Compaq Visual Fortran - version 6.6., which calculates 171 lift parameters, organized in 42 tables. The objective of the work presented in this paper is an attempt at computer modelling of the design and parameters derivation of the rope way systems and their computer variation and optimization.
Yang, Pinchen; Cheng, Chung-Ping; Chang, Chen-Lin; Liu, Tai-Ling; Hsu, Hsiu-Yi; Yen, Cheng-Fang
2013-02-01
The Wechsler Intelligence Scale for Children 4th edition-Chinese version (WISC-IV-Chinese) has been in clinical use in Taiwan since 2007. Research is needed to determine how the WISC-IV, modified from its earlier version, will affect its interpretation in clinical practice in a Mandarin-speaking context. We attempted to use WISC-IV-Chinese scores to identify the cognitive strengths and weaknesses in 334 Taiwanese children with attention-deficit/hyperactivity disorder (ADHD). Comparison of cognitive profiles of WISC-IV-Chinese scores between subtypes of ADHD was also performed. The results indicated that the four-factor model of the WISC-IV-Chinese fitted well for Taiwanese children with ADHD. The profiles showed that performance in the index score of the Processing Speed Index was the weakness domain for the Taiwanese children with ADHD, as confirmed by two different kinds of analytic methods. Cognitive profile analysis of ADHD subtypes revealed children with inattentive subtypes to have a greater weakness in processing speed performance. The implications of the profiles of the index scores on the WISC-IV-Chinese version for Taiwanese children with ADHD were explored. © 2013 The Authors. Psychiatry and Clinical Neurosciences © 2013 Japanese Society of Psychiatry and Neurology.
Ghouzam, Yassine; Postic, Guillaume; Guerin, Pierre-Edouard; de Brevern, Alexandre G.; Gelly, Jean-Christophe
2016-01-01
Protein structure prediction based on comparative modeling is the most efficient way to produce structural models when it can be performed. ORION is a dedicated webserver based on a new strategy that performs this task. The identification by ORION of suitable templates is performed using an original profile-profile approach that combines sequence and structure evolution information. Structure evolution information is encoded into profiles using structural features, such as solvent accessibility and local conformation —with Protein Blocks—, which give an accurate description of the local protein structure. ORION has recently been improved, increasing by 5% the quality of its results. The ORION web server accepts a single protein sequence as input and searches homologous protein structures within minutes. Various databases such as PDB, SCOP and HOMSTRAD can be mined to find an appropriate structural template. For the modeling step, a protein 3D structure can be directly obtained from the selected template by MODELLER and displayed with global and local quality model estimation measures. The sequence and the predicted structure of 4 examples from the CAMEO server and a recent CASP11 target from the ‘Hard’ category (T0818-D1) are shown as pertinent examples. Our web server is accessible at http://www.dsimb.inserm.fr/ORION/. PMID:27319297
Ghouzam, Yassine; Postic, Guillaume; Guerin, Pierre-Edouard; de Brevern, Alexandre G; Gelly, Jean-Christophe
2016-06-20
Protein structure prediction based on comparative modeling is the most efficient way to produce structural models when it can be performed. ORION is a dedicated webserver based on a new strategy that performs this task. The identification by ORION of suitable templates is performed using an original profile-profile approach that combines sequence and structure evolution information. Structure evolution information is encoded into profiles using structural features, such as solvent accessibility and local conformation -with Protein Blocks-, which give an accurate description of the local protein structure. ORION has recently been improved, increasing by 5% the quality of its results. The ORION web server accepts a single protein sequence as input and searches homologous protein structures within minutes. Various databases such as PDB, SCOP and HOMSTRAD can be mined to find an appropriate structural template. For the modeling step, a protein 3D structure can be directly obtained from the selected template by MODELLER and displayed with global and local quality model estimation measures. The sequence and the predicted structure of 4 examples from the CAMEO server and a recent CASP11 target from the 'Hard' category (T0818-D1) are shown as pertinent examples. Our web server is accessible at http://www.dsimb.inserm.fr/ORION/.
The interdependence of profile drag and lift with Joukowski type and related airfoils
NASA Technical Reports Server (NTRS)
Muttray, H
1935-01-01
On the basis of a systematic investigation of Gottingen wind-tunnel data on Joukowski type and related airfoils, it is shown in what manner the profile drag coefficient is dependent on the lift coefficient. The individual factors for the construction of the profile drag polars are given. They afford a more accurate calculation of the performance coefficients of airplane designs than otherwise attainable with the conventional assumption of constant drag coefficient.
Fonseca, Fernando G A; Esmerino, Erick A; Filho, Elson R Tavares; Ferraz, Juliana P; da Cruz, Adriano G; Bolini, Helena M A
2016-05-01
Rapid sensory profiling methods have gained space in the sensory evaluation field. Techniques using direct analysis of the terms generated by consumers are considered easy to perform, without specific training requirements, thus improving knowledge about consumer perceptions on various products. This study aimed to determine the sensory profile of different commercial samples of chocolate ice cream, labeled as conventional and light or diet, using the "comment analysis" and "pivot profile" methods, based on consumers' perceptions. In the comment analysis task, consumers responded to 2 separate open questions describing the sensory attributes they liked or disliked in each sample. In the pivot profile method, samples were served in pairs (consisting of a coded sample and pivot), and consumers indicated the higher and lower intensity attributes in the target sample compared with the pivot. We observed that both methods were able to characterize the different chocolate ice cream samples using consumer perception, with high correlation results and configurational similarity (regression vector coefficient=0.917) between them. However, it is worth emphasizing that comment analysis is performed intuitively by consumers, whereas the pivot profile method showed high analytical and discriminative power even using consumers, proving to be a promising technique for routine application when classical descriptive methods cannot be used. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Testing job typologies and identifying at-risk subpopulations using factor mixture models.
Keller, Anita C; Igic, Ivana; Meier, Laurenz L; Semmer, Norbert K; Schaubroeck, John M; Brunner, Beatrice; Elfering, Achim
2017-10-01
Research in occupational health psychology has tended to focus on the effects of single job characteristics or various job characteristics combined into 1 factor. However, such a variable-centered approach does not account for the clustering of job attributes among groups of employees. We addressed this issue by using a person-centered approach to (a) investigate the occurrence of different empirical constellations of perceived job stressors and resources and (b) validate the meaningfulness of profiles by analyzing their association with employee well-being and performance. We applied factor mixture modeling to identify profiles in 4 large samples consisting of employees in Switzerland (Studies 1 and 2) and the United States (Studies 3 and 4). We identified 2 profiles that spanned the 4 samples, with 1 reflecting a combination of relatively low stressors and high resources (P1) and the other relatively high stressors and low resources (P3). The profiles differed mainly in terms of their organizational and social aspects. Employees in P1 reported significantly higher mean levels of job satisfaction, performance, and general health, and lower means in exhaustion compared with P3. Additional analyses showed differential relationships between job attributes and outcomes depending on profile membership. These findings may benefit organizational interventions as they show that perceived work stressors and resources more strongly influence satisfaction and well-being in particular profiles. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Brender, Jeffrey R.; Zhang, Yang
2015-01-01
The formation of protein-protein complexes is essential for proteins to perform their physiological functions in the cell. Mutations that prevent the proper formation of the correct complexes can have serious consequences for the associated cellular processes. Since experimental determination of protein-protein binding affinity remains difficult when performed on a large scale, computational methods for predicting the consequences of mutations on binding affinity are highly desirable. We show that a scoring function based on interface structure profiles collected from analogous protein-protein interactions in the PDB is a powerful predictor of protein binding affinity changes upon mutation. As a standalone feature, the differences between the interface profile score of the mutant and wild-type proteins has an accuracy equivalent to the best all-atom potentials, despite being two orders of magnitude faster once the profile has been constructed. Due to its unique sensitivity in collecting the evolutionary profiles of analogous binding interactions and the high speed of calculation, the interface profile score has additional advantages as a complementary feature to combine with physics-based potentials for improving the accuracy of composite scoring approaches. By incorporating the sequence-derived and residue-level coarse-grained potentials with the interface structure profile score, a composite model was constructed through the random forest training, which generates a Pearson correlation coefficient >0.8 between the predicted and observed binding free-energy changes upon mutation. This accuracy is comparable to, or outperforms in most cases, the current best methods, but does not require high-resolution full-atomic models of the mutant structures. The binding interface profiling approach should find useful application in human-disease mutation recognition and protein interface design studies. PMID:26506533
On the Use of Topside RO-Derived Electron Density for Model Validation
NASA Astrophysics Data System (ADS)
Shaikh, M. M.; Nava, B.; Haralambous, H.
2018-05-01
In this work, the standard Abel inversion has been exploited as a powerful observation tool, which may be helpful to model the topside of the ionosphere and therefore to validate ionospheric models. A thorough investigation on the behavior of radio occultation (RO)-derived topside electron density (Ne(h))-profiles has therefore been performed with the main purpose to understand whether it is possible to predict the accuracy of a single RO-retrieved topside by comparing the peak density and height of the retrieved profile to the true values. As a first step, a simulation study based on the use of the NeQuick2 model has been performed to show that when the RO-derived electron density peak and height match the true peak values, the full topside Ne(h)-profile may be considered accurate. In order to validate this hypothesis with experimental data, electron density profiles obtained from four different incoherent scatter radars have therefore been considered together with co-located RO-derived Ne(h)-profiles. The evidence presented in this paper show that in all cases examined, if the incoherent scatter radar and the corresponding co-located RO profile have matching peak parameter values, their topsides are in very good agreement. The simulation results presented in this work also highlighted the importance of considering the occultation plane azimuth while inverting RO data to obtain Ne(h)-profile. In particular, they have indicated that there is a preferred range of azimuths of the occultation plane (80°-100°) for which the difference between the "true" and the RO-retrieved Ne(h)-profile in the topside is generally minimal.
Benschop, Corina C G; van de Merwe, Linda; de Jong, Jeroen; Vanvooren, Vanessa; Kempenaers, Morgane; Kees van der Beek, C P; Barni, Filippo; Reyes, Eusebio López; Moulin, Léa; Pene, Laurent; Haned, Hinda; Sijen, Titia
2017-07-01
Searching a national DNA database with complex and incomplete profiles usually yields very large numbers of possible matches that can present many candidate suspects to be further investigated by the forensic scientist and/or police. Current practice in most forensic laboratories consists of ordering these 'hits' based on the number of matching alleles with the searched profile. Thus, candidate profiles that share the same number of matching alleles are not differentiated and due to the lack of other ranking criteria for the candidate list it may be difficult to discern a true match from the false positives or notice that all candidates are in fact false positives. SmartRank was developed to put forward only relevant candidates and rank them accordingly. The SmartRank software computes a likelihood ratio (LR) for the searched profile and each profile in the DNA database and ranks database entries above a defined LR threshold according to the calculated LR. In this study, we examined for mixed DNA profiles of variable complexity whether the true donors are retrieved, what the number of false positives above an LR threshold is and the ranking position of the true donors. Using 343 mixed DNA profiles over 750 SmartRank searches were performed. In addition, the performance of SmartRank and CODIS were compared regarding DNA database searches and SmartRank was found complementary to CODIS. We also describe the applicable domain of SmartRank and provide guidelines. The SmartRank software is open-source and freely available. Using the best practice guidelines, SmartRank enables obtaining investigative leads in criminal cases lacking a suspect. Copyright © 2017 Elsevier B.V. All rights reserved.
Performance comparison of leading image codecs: H.264/AVC Intra, JPEG2000, and Microsoft HD Photo
NASA Astrophysics Data System (ADS)
Tran, Trac D.; Liu, Lijie; Topiwala, Pankaj
2007-09-01
This paper provides a detailed rate-distortion performance comparison between JPEG2000, Microsoft HD Photo, and H.264/AVC High Profile 4:4:4 I-frame coding for high-resolution still images and high-definition (HD) 1080p video sequences. This work is an extension to our previous comparative study published in previous SPIE conferences [1, 2]. Here we further optimize all three codecs for compression performance. Coding simulations are performed on a set of large-format color images captured from mainstream digital cameras and 1080p HD video sequences commonly used for H.264/AVC standardization work. Overall, our experimental results show that all three codecs offer very similar coding performances at the high-quality, high-resolution setting. Differences tend to be data-dependent: JPEG2000 with the wavelet technology tends to be the best performer with smooth spatial data; H.264/AVC High-Profile with advanced spatial prediction modes tends to cope best with more complex visual content; Microsoft HD Photo tends to be the most consistent across the board. For the still-image data sets, JPEG2000 offers the best R-D performance gains (around 0.2 to 1 dB in peak signal-to-noise ratio) over H.264/AVC High-Profile intra coding and Microsoft HD Photo. For the 1080p video data set, all three codecs offer very similar coding performance. As in [1, 2], neither do we consider scalability nor complexity in this study (JPEG2000 is operating in non-scalable, but optimal performance mode).
Churchill, Jennifer D; Novroski, Nicole M M; King, Jonathan L; Seah, Lay Hong; Budowle, Bruce
2017-09-01
The MiSeq FGx Forensic Genomics System (Illumina) enables amplification and massively parallel sequencing of 59 STRs, 94 identity informative SNPs, 54 ancestry informative SNPs, and 24 phenotypic informative SNPs. Allele frequency and population statistics data were generated for the 172 SNP loci included in this panel on four major population groups (Chinese, African Americans, US Caucasians, and Southwest Hispanics). Single-locus and combined random match probability values were generated for the identity informative SNPs. The average combined STR and identity informative SNP random match probabilities (assuming independence) across all four populations were 1.75E-67 and 2.30E-71 with length-based and sequence-based STR alleles, respectively. Ancestry and phenotype predictions were obtained using the ForenSeq™ Universal Analysis System (UAS; Illumina) based on the ancestry informative and phenotype informative SNP profiles generated for each sample. Additionally, performance metrics, including profile completeness, read depth, relative locus performance, and allele coverage ratios, were evaluated and detailed for the 725 samples included in this study. While some genetic markers included in this panel performed notably better than others, performance across populations was generally consistent. The performance and population data included in this study support that accurate and reliable profiles were generated and provide valuable background information for laboratories considering internal validation studies and implementation. Copyright © 2017 Elsevier B.V. All rights reserved.
Profiles 1999 State Report. Oklahoma Educational Indicators Program.
ERIC Educational Resources Information Center
Oklahoma State Dept. of Education, Oklahoma City. Office of Accountability.
The Oklahoma Educational Indicators Program is a system developed under the Oklahoma Education Reform Act of 1990 to assess the performance of public schools and school systems. "Profiles 1999" consists of state, district, and school components. Each component divides the information presented into three major reporting categories: (1)…
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2006
2006-01-01
This report presents a profile of Australian technical and further education (TAFE) institutes for the 2003 calendar year. The project was undertaken to illustrate the extent of variation in the sector. The report also provides data on TAFE institutes that can be used by the institutes for planning, performance monitoring and marketing purposes.…
DOT National Transportation Integrated Search
2012-03-31
This report evaluates the performance of Continuous Risk Profile (CRP) compared with the : Sliding Window Method (SWM) and Peak Searching (PS) methods. These three network : screening methods all require the same inputs: traffic collision data and Sa...
DOT National Transportation Integrated Search
2012-03-01
This report evaluates the performance of Continuous Risk Profile (CRP) compared with the : Sliding Window Method (SWM) and Peak Searching (PS) methods. These three network : screening methods all require the same inputs: traffic collision data and Sa...
Complex Sentence Profiles in Children with Specific Language Impairment: Are They Really Atypical?
ERIC Educational Resources Information Center
Riches, Nick G.
2017-01-01
Children with Specific Language Impairment (SLI) have language difficulties of unknown origin. Syntactic profiles are atypical, with poor performance on non-canonical structures, e.g. object relatives, suggesting a localized deficit. However, existing analyses using ANOVAs are problematic because they do not systematically address unequal…
High School Profiles: Application of HTML for Recruitment Decision Making
ERIC Educational Resources Information Center
Johnson, Iryna Y.
2008-01-01
Because high school graduates are many colleges' primary target population, information on high school students' performance and sociodemographic characteristics becomes important for the recruitment process. This article introduces an HTML application (referred to here as the High School Profile) that arranges high school information and makes…
We have performed for the first time a comprehensive profiling of changes in protein expression of soluble proteins in livers from mice treated with the mouse liver tumorigen, propiconazole, to uncover the pathways and networks altered by this commonly used fungicide. Utilizing t...
ERIC Educational Resources Information Center
Missouri Univ., Columbia. Instructional Materials Lab.
This chart is intended for use in documenting the fact that a student participating in a culinary arts program has achieved the performance standards specified in the Missouri Competency Profile for culinary arts. The chart includes space for recording basic student and instructor information and the student's on-the-job training and work…
Cognitive Profiles of Chinese Adolescents with Dyslexia
ERIC Educational Resources Information Center
Chung, Kevin K. H.; Ho, Connie Suk-Han; Chan, David W.; Tsang, Suk-Man; Lee, Suk-Han
2010-01-01
The present study sought to identify cognitive abilities that might distinguish Hong Kong Chinese adolescents with and without dyslexia and examined the cognitive profile of dyslexic adolescents in order to better understand this important problem. The performance of 27 Chinese adolescents with childhood diagnoses of dyslexia was compared with 27…
ERIC Educational Resources Information Center
Ohio State Board of Education, Columbus.
This Ohio Integrated Technical and Academic Competency (ITAC) profile provides the professional or occupational competencies deemed essential for a graduate to perform proficiently in carpentry when he or she graduates from the specialization work force development program in industrial and engineering systems. The profile includes competency…
A Profile of Advanced Writing Performance: Putting Some Flesh on the Bones
ERIC Educational Resources Information Center
Morgan, Siân
2012-01-01
The "Common European Framework of Reference for Languages" (CEFR) has prompted much reflection on language testing and raised awareness of the importance of standardisation in assessing English for academic and professional purposes in an increasingly globalised world. Criticism has nevertheless been levelled at CEFR profiles for being…
DOE Office of Scientific and Technical Information (OSTI.GOV)
none,
2014-11-01
This 2014 Top Innovations profile describes Building America research and support in developing and gaining adoption of ASHRAE 62.2, a residential ventilation standard that is critical to transforming the U.S. housing industry to high-performance homes.
Radar Cuts Subsoil Survey Costs
NASA Technical Reports Server (NTRS)
Johnson, R.; Glaccum, R.
1984-01-01
Soil features located with minimum time and labor. Ground-penetrating radar (GPR) system supplements manual and mechanical methods in performing subsurface soil survey. Mobile system obtains graphic profile of soil discontinuities and interfaces as function of depth. One or two test borings necessary to substantiate soil profile. GPR proves useful as reconnaissance tool.
NASA Astrophysics Data System (ADS)
Barraclough, Brendan; Li, Jonathan G.; Lebron, Sharon; Fan, Qiyong; Liu, Chihray; Yan, Guanghua
2015-08-01
The ionization chamber volume averaging effect is a well-known issue without an elegant solution. The purpose of this study is to propose a novel convolution-based approach to address the volume averaging effect in model-based treatment planning systems (TPSs). Ionization chamber-measured beam profiles can be regarded as the convolution between the detector response function and the implicit real profiles. Existing approaches address the issue by trying to remove the volume averaging effect from the measurement. In contrast, our proposed method imports the measured profiles directly into the TPS and addresses the problem by reoptimizing pertinent parameters of the TPS beam model. In the iterative beam modeling process, the TPS-calculated beam profiles are convolved with the same detector response function. Beam model parameters responsible for the penumbra are optimized to drive the convolved profiles to match the measured profiles. Since the convolved and the measured profiles are subject to identical volume averaging effect, the calculated profiles match the real profiles when the optimization converges. The method was applied to reoptimize a CC13 beam model commissioned with profiles measured with a standard ionization chamber (Scanditronix Wellhofer, Bartlett, TN). The reoptimized beam model was validated by comparing the TPS-calculated profiles with diode-measured profiles. Its performance in intensity-modulated radiation therapy (IMRT) quality assurance (QA) for ten head-and-neck patients was compared with the CC13 beam model and a clinical beam model (manually optimized, clinically proven) using standard Gamma comparisons. The beam profiles calculated with the reoptimized beam model showed excellent agreement with diode measurement at all measured geometries. Performance of the reoptimized beam model was comparable with that of the clinical beam model in IMRT QA. The average passing rates using the reoptimized beam model increased substantially from 92.1% to 99.3% with 3%/3 mm and from 79.2% to 95.2% with 2%/2 mm when compared with the CC13 beam model. These results show the effectiveness of the proposed method. Less inter-user variability can be expected of the final beam model. It is also found that the method can be easily integrated into model-based TPS.
Comparison of MAX-DOAS profiling algorithms during CINDI-2 - Part 1: aerosols
NASA Astrophysics Data System (ADS)
Friess, Udo; Hendrick, Francois; Tirpitz, Jan-Lukas; Apituley, Arnoud; van Roozendael, Michel; Kreher, Karin; Richter, Andreas; Wagner, Thomas
2017-04-01
The second Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI-2) took place at the Cabauw Experimental Site for Atmospheric Research (CESAR; Utrecht area, The Netherlands) from 25 August until 7 October 2016. CINDI-2 was aiming at assessing the consistency of MAX-DOAS slant column density measurements of tropospheric species (NO2, HCHO, O3, and O4) relevant for the validation of future ESA atmospheric Sentinel missions, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world. An important objective of the campaign was to study the relationship between remote-sensing column and profile measurements of the above species and collocated reference ancillary observations. For this purpose, the CINDI-2 Profiling Task Team (CPTT) was created, involving 22 groups performing aerosol and trace gas vertical profile inversion using dedicated MAX-DOAS profiling algorithms, as well as the teams responsible for ancillary profile and surface concentration measurements (NO2 analysers, NO2 sondes, NO2 and Raman LIDARs, CAPS, Long-Path DOAS, sun photometer, nephelometer, etc). The main purpose of the CPTT is to assess the consistency of the different profiling tools for retrieving aerosol extinction and trace gas vertical profiles through comparison exercises using commonly defined settings and to validate the retrievals with correlative observations. In this presentation, we give an overview of the MAX-DOAS vertical profile comparison results, focusing on the retrieval of aerosol extinction profiles, with the trace gas retrievals being presented in a companion abstract led by F. Hendrick. The performance of the different algorithms is investigated with respect to the variable visibility and cloud conditions encountered during the campaign. The consistency between optimal-estimation-based and parameterized profiling tools is also evaluated for these different conditions, together with the level of agreement with available ancillary aerosol observations, including sun photometer, nephelometer and LIDAR. This comparison study will be put in the perspective of the development of a centralized MAX-DOAS processing system within the framework of the ESA Fiducial Reference Measurements (FRM) project.
Transport and Performance in DIII--D Discharges with Weak or Negative Central Magnetic Shear
NASA Astrophysics Data System (ADS)
Greenfield, C. M.
1996-11-01
The previously reported [B.W. Rice et al., Phys. Plasmas 3, 1983 (1996)] improved performance in DIII-D plasmas with weak or negative central magnetic shear has been additionally enhanced in recent experiments where controlled L-H transitions were used to further broaden the pressure profile and delay detrimental MHD activity [E.A. Lazarus et al., submitted to Phys. Rev. Letters]. These discharges exhibit the highest plasma energy (>=4 MJ) and fusion reactivity (R_DD <= 4.8 × 10^16 s-1, Q_DD <= 0.00146, equivalent Q_DT <= 0.32) yet realized in DIII-D. In such discharges, the core magnetic shear is reversed by tailoring the current profile through application of early, low power, neutral beam injection. These plasmas often undergo a transition to a high performance state, usually following an increase in the applied heating power. At the transition time, we observe the formation of an internal transport barrier near the location of the minimum safety factor, q_min. Formation of this barrier, which can result in central peaking of the temperature and density profiles, is consistent with suppression of turbulence by locally enhanced E×B flow shear. Beam emission spectroscopy and far infrared scattering measurements made in the vicinity of the barrier show that at the time of transition to high performance, fluctuation levels are reduced to below the threshold of detection (tilden/n <= 0.1%). Analysis with the ONETWO and TRANSP transport codes indicates concomitant reductions in the core ion thermal diffusivity to levels at or below Chang-Hinton neoclassical. Smaller reductions are indicated for the electrons. An L-H transition is programmed shortly before the plasma would become MHD unstable in order to broaden the profiles and delay the onset of instabilities. In the resulting state, the region exhibiting ion diffusivities at or below neoclassical is extended to nearly the entire plasma. Analysis to date suggests that the effect of strongly negative vs. weak magnetic shear on transport is negligible, although there is a significant effect on stability. A comparison of transport in strong and weakly sheared discharges will be shown, both in L- (peaked profiles) and H-mode (broadened profiles).
The Influence of Rotations on Match Running Performance in Female Australian Football Midfielders.
Black, Georgia M; Gabbett, Tim J; Johnston, Richard D; Naughton, Geraldine; Cole, Michael H; Dawson, Brian
2018-04-01
With female Australian football (AF) gaining popularity, understanding match demands is becoming increasingly important. The aim of this study was to compare running performances of rotated and whole-quarter state-level female AF players during match quarters. Twenty-two state-level female AF midfielders wore Global Positioning System units during 14 games to evaluate activity profiles. The Yo-Yo Intermittent Recovery Test Level 1 (Yo-Yo IR1) was used as a measure of high-intensity running ability. Data were categorized into whole quarter, rotation bout 1, and rotation bout 2 before being further divided into quartiles. Players were separated into high- or low-Yo-Yo IR1 groups using a median split based on their Yo-Yo IR1 performance. Short (4-6 min), moderate (6-12 min), and long (12-18 min) on-field bout activity profiles were compared with whole-quarter players. High Yo-Yo IR1 performance allowed players to cover greater relative distances (ES = 0.57-0.88) and high-speed distances (ES = 0.57-0.86) during rotations. No differences were reported between Yo-Yo IR1 groups when players were required to play whole quarters (ES ≤ 0.26, likelihood ≤64%). Players who were on field for short to moderate durations exhibited greater activity profiles than whole-quarter players. Superior high-speed running ability results in a greater activity profile than for players who possess lower high-speed running ability. The findings also highlight the importance of short to moderate (4-12 min) rotation periods and may be used to increase high-intensity running performance within quarters in female AF players.
Ghysels, R; Vanroye, E; Westhovens, M; Spooren, A
2017-03-01
In order to enhance occupational therapy reasoning in clinical practice, different elements such as client-centred approach, evidence-based care and interdisciplinary work should be taken into account, but is a challenge. To describe the development of the digital Hasselt Occupational Performance Profile (H-OPP © ) that enhances occupational therapy reasoning from ICF perspective. A participative qualitative design was used to create the H-OPP © in an iterative way in which occupational therapy lectures, ICF experts, students and occupational therapists in the field were involved. After linking occupational therapy terminology to the ICF, different stages of the H-OPP were identified and elaborated with main features: generating an occupational performance profile based on inventarization of problems and possibilities, formulating an occupational performance diagnosis and enabling to create an intervention plan. In all stages, both the perspectives of the client and the occupational therapist were taken into account. To increase practical use, the tool was further elaborated and digitalized. The H-OPP © is a digital coach that guides and facilitates professional reasoning in (novice) occupational therapists. It augments involvement of the client system. Furthermore, it enhances interdisciplinary communication and evidence-based care.
Argonne Bubble Experiment Thermal Model Development III
DOE Office of Scientific and Technical Information (OSTI.GOV)
Buechler, Cynthia Eileen
This report describes the continuation of the work reported in “Argonne Bubble Experiment Thermal Model Development” and “Argonne Bubble Experiment Thermal Model Development II”. The experiment was performed at Argonne National Laboratory (ANL) in 2014. A rastered 35 MeV electron beam deposited power in a solution of uranyl sulfate, generating heat and radiolytic gas bubbles. Irradiations were performed at beam power levels between 6 and 15 kW. Solution temperatures were measured by thermocouples, and gas bubble behavior was recorded. The previous report2 described the Monte-Carlo N-Particle (MCNP) calculations and Computational Fluid Dynamics (CFD) analysis performed on the as-built solution vesselmore » geometry. The CFD simulations in the current analysis were performed using Ansys Fluent, Ver. 17.2. The same power profiles determined from MCNP calculations in earlier work were used for the 12 and 15 kW simulations. The primary goal of the current work is to calculate the temperature profiles for the 12 and 15 kW cases using reasonable estimates for the gas generation rate, based on images of the bubbles recorded during the irradiations. Temperature profiles resulting from the CFD calculations are compared to experimental measurements.« less
On the parametrization of lateral dose profiles in proton radiation therapy.
Bellinzona, V E; Ciocca, M; Embriaco, A; Fontana, A; Mairani, A; Mori, M; Parodi, K
2015-07-01
The accurate evaluation of the lateral dose profile is an important issue in the field of proton radiation therapy. The beam spread, due to Multiple Coulomb Scattering (MCS), is described by the Molière's theory. To take into account also the contribution of nuclear interactions, modern Treatment Planning Systems (TPSs) generally approximate the dose profiles by a sum of Gaussian functions. In this paper we have compared different parametrizations for the lateral dose profile of protons in water for therapeutical energies: the goal is to improve the performances of the actual treatment planning. We have simulated typical dose profiles at the CNAO (Centro Nazionale di Adroterapia Oncologica) beamline with the FLUKA code and validated them with data taken at CNAO considering different energies and depths. We then performed best fits of the lateral dose profiles for different functions using ROOT and MINUIT. The accuracy of the best fits was analyzed by evaluating the reduced χ(2), the number of free parameters of the functions and the calculation time. The best results were obtained with the triple Gaussian and double Gaussian Lorentz-Cauchy functions which have 6 parameters, but good results were also obtained with the so called Gauss-Rutherford function which has only 4 parameters. The comparison of the studied functions with accurate and validated Monte Carlo calculations and with experimental data from CNAO lead us to propose an original parametrization, the Gauss-Rutherford function, to describe the lateral dose profiles of proton beams. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.
Cher, Chen-Yong; Coteus, Paul W; Gara, Alan; Kursun, Eren; Paulsen, David P; Schuelke, Brian A; Sheets, II, John E; Tian, Shurong
2013-10-01
A processor-implemented method for determining aging of a processing unit in a processor the method comprising: calculating an effective aging profile for the processing unit wherein the effective aging profile quantifies the effects of aging on the processing unit; combining the effective aging profile with process variation data, actual workload data and operating conditions data for the processing unit; and determining aging through an aging sensor of the processing unit using the effective aging profile, the process variation data, the actual workload data, architectural characteristics and redundancy data, and the operating conditions data for the processing unit.
Computation of nonparametric convex hazard estimators via profile methods.
Jankowski, Hanna K; Wellner, Jon A
2009-05-01
This paper proposes a profile likelihood algorithm to compute the nonparametric maximum likelihood estimator of a convex hazard function. The maximisation is performed in two steps: First the support reduction algorithm is used to maximise the likelihood over all hazard functions with a given point of minimum (or antimode). Then it is shown that the profile (or partially maximised) likelihood is quasi-concave as a function of the antimode, so that a bisection algorithm can be applied to find the maximum of the profile likelihood, and hence also the global maximum. The new algorithm is illustrated using both artificial and real data, including lifetime data for Canadian males and females.
Photon counting image sensor development for astronomical applications
NASA Technical Reports Server (NTRS)
Jenkins, Edward B.
1987-01-01
Specially built intensified CCD (ICCD) detector tubes were purchased and the performance of the electron bombardment process was investigated. In addition to studying the signal characteristics of the photoevents, there was interest in demonstrating that back-illuminated chips were not susceptible to radiation damage to their clocking electrodes. How to perform a centroid analysis for a 2-dimensional Gaussian distribution of charge is described. Measurement of the projection (along columns or rows) of the average charge spread profile is discussed. The development and flight of the Interstellar Medium Absorption Profile Spectrograph (IMAPS) is discussed.
NGMIX: Gaussian mixture models for 2D images
NASA Astrophysics Data System (ADS)
Sheldon, Erin
2015-08-01
NGMIX implements Gaussian mixture models for 2D images. Both the PSF profile and the galaxy are modeled using mixtures of Gaussians. Convolutions are thus performed analytically, resulting in fast model generation as compared to methods that perform the convolution in Fourier space. For the galaxy model, NGMIX supports exponential disks and de Vaucouleurs and Sérsic profiles; these are implemented approximately as a sum of Gaussians using the fits from Hogg & Lang (2013). Additionally, any number of Gaussians can be fit, either completely free or constrained to be cocentric and co-elliptical.
The front end test stand high performance H- ion source at Rutherford Appleton Laboratory.
Faircloth, D C; Lawrie, S; Letchford, A P; Gabor, C; Wise, P; Whitehead, M; Wood, T; Westall, M; Findlay, D; Perkins, M; Savage, P J; Lee, D A; Pozimski, J K
2010-02-01
The aim of the front end test stand (FETS) project is to demonstrate that chopped low energy beams of high quality can be produced. FETS consists of a 60 mA Penning Surface Plasma Ion Source, a three solenoid low energy beam transport, a 3 MeV radio frequency quadrupole, a chopper, and a comprehensive suite of diagnostics. This paper details the design and initial performance of the ion source and the laser profile measurement system. Beam current, profile, and emittance measurements are shown for different operating conditions.
Peterson, Leif E
2002-01-01
CLUSFAVOR (CLUSter and Factor Analysis with Varimax Orthogonal Rotation) 5.0 is a Windows-based computer program for hierarchical cluster and principal-component analysis of microarray-based transcriptional profiles. CLUSFAVOR 5.0 standardizes input data; sorts data according to gene-specific coefficient of variation, standard deviation, average and total expression, and Shannon entropy; performs hierarchical cluster analysis using nearest-neighbor, unweighted pair-group method using arithmetic averages (UPGMA), or furthest-neighbor joining methods, and Euclidean, correlation, or jack-knife distances; and performs principal-component analysis. PMID:12184816
Electronic-beam analysis of excimer lasers used for photorefractive keratotomy
NASA Astrophysics Data System (ADS)
Roundy, Carlos B.
1998-07-01
Excimer lasers are an excellent instrument for performing photorefractive keratotomy, PRK. The UV light from the laser causes an ablation of the cornea in proportion to the intensity of the light. The primary characteristic essential to successful PRK is the uniformity of the Top Hat, or working portion of the laser beam. In order for this intensity profile to be sufficiently uniform for PRK, it is essential to periodically measure the equality of the laser beam profile. This ensures that the laser continues to operate properly and provide the expected performance.
Shock compression response of cold-rolled Ni/Al multilayer composites
Specht, Paul E.; Weihs, Timothy P.; Thadhani, Naresh N.
2017-01-06
Uniaxial strain, plate-on-plate impact experiments were performed on cold-rolled Ni/Al multilayer composites and the resulting Hugoniot was determined through time-resolved measurements combined with impedance matching. The experimental Hugoniot agreed with that previously predicted by two dimensional (2D) meso-scale calculations. Additional 2D meso-scale simulations were performed using the same computational method as the prior study to reproduce the experimentally measured free surface velocities and stress profiles. Finally, these simulations accurately replicated the experimental profiles, providing additional validation for the previous computational work.
Measurements of Raman crystallinity profiles in thin-film microcrystalline silicon solar cells
NASA Astrophysics Data System (ADS)
Choong, G.; Vallat-Sauvain, E.; Multone, X.; Fesquet, L.; Kroll, U.; Meier, J.
2013-06-01
Wedge-polished thin film microcrystalline silicon solar cells are prepared and used for micro-Raman measurements. Thereby, the variations of the Raman crystallinity with depth are accessed easily. Depth resolution limits of the measurement set-up are established and calculations evidencing the role of optical limits are presented. Due to this new technique, Raman crystallinity profiles of two microcrystalline silicon cells give first hints for the optimization of the profile leading to improved electrical performance of such devices.
Lidar for Wind and Optical Turbulence Profiling
NASA Astrophysics Data System (ADS)
Fastig, Shlomo; Porat, Omer; Englander, Abraham; Sprung, Detlev; Stein, Karin U.; Sucher, Erik
2018-04-01
A field campaign for the comparison investigation of systems to measure wind and optical turbulence profiles was conducted in northern Germany. The experimental effort was to compare the performance of the LIDAR, SODAR-RASS and ultrasonic anemometers for the measurement of the above mentioned atmospheric parameters. Soreq's LIDAR is a fiber laser based system demonstrator for the vertical profiling of the wind and turbulence, based on the correlation of aerosol density variations. It provides measurements up to 350m with 20m resolution.
NASA Astrophysics Data System (ADS)
Negi, Deepchand Singh; Pattamatta, Arvind
2015-04-01
The present study deals with shape optimization of dimples on the target surface in multi-jet impingement heat transfer. Bezier polynomial formulation is incorporated to generate profile shapes for the dimple profile generation and a multi-objective optimization is performed. The optimized dimple shape exhibits higher local Nusselt number values compared to the reference hemispherical dimpled plate optimized shape which can be used to alleviate local temperature hot spots on target surface.
Jang, Jae-Wook; Yun, Jaesung; Mohaisen, Aziz; Woo, Jiyoung; Kim, Huy Kang
2016-01-01
Mass-market mobile security threats have increased recently due to the growth of mobile technologies and the popularity of mobile devices. Accordingly, techniques have been introduced for identifying, classifying, and defending against mobile threats utilizing static, dynamic, on-device, and off-device techniques. Static techniques are easy to evade, while dynamic techniques are expensive. On-device techniques are evasion, while off-device techniques need being always online. To address some of those shortcomings, we introduce Andro-profiler, a hybrid behavior based analysis and classification system for mobile malware. Andro-profiler main goals are efficiency, scalability, and accuracy. For that, Andro-profiler classifies malware by exploiting the behavior profiling extracted from the integrated system logs including system calls. Andro-profiler executes a malicious application on an emulator in order to generate the integrated system logs, and creates human-readable behavior profiles by analyzing the integrated system logs. By comparing the behavior profile of malicious application with representative behavior profile for each malware family using a weighted similarity matching technique, Andro-profiler detects and classifies it into malware families. The experiment results demonstrate that Andro-profiler is scalable, performs well in detecting and classifying malware with accuracy greater than 98 %, outperforms the existing state-of-the-art work, and is capable of identifying 0-day mobile malware samples.
Performance evaluation of MPEG internet video coding
NASA Astrophysics Data System (ADS)
Luo, Jiajia; Wang, Ronggang; Fan, Kui; Wang, Zhenyu; Li, Ge; Wang, Wenmin
2016-09-01
Internet Video Coding (IVC) has been developed in MPEG by combining well-known existing technology elements and new coding tools with royalty-free declarations. In June 2015, IVC project was approved as ISO/IEC 14496-33 (MPEG- 4 Internet Video Coding). It is believed that this standard can be highly beneficial for video services in the Internet domain. This paper evaluates the objective and subjective performances of IVC by comparing it against Web Video Coding (WVC), Video Coding for Browsers (VCB) and AVC High Profile. Experimental results show that IVC's compression performance is approximately equal to that of the AVC High Profile for typical operational settings, both for streaming and low-delay applications, and is better than WVC and VCB.
Carpentry Performance Objectives.
ERIC Educational Resources Information Center
Day, Gerald F.; Tucker, John
The guidelines for carpentry performance objectives were written for vocational educators in order to insure that their programs are fulfilling the training requirements of today's job market. The document outlines eight uses of performance objectives and provides sample employability profiles, training achievement records, and a carpentry…
An Interoperability Framework and Capability Profiling for Manufacturing Software
NASA Astrophysics Data System (ADS)
Matsuda, M.; Arai, E.; Nakano, N.; Wakai, H.; Takeda, H.; Takata, M.; Sasaki, H.
ISO/TC184/SC5/WG4 is working on ISO16100: Manufacturing software capability profiling for interoperability. This paper reports on a manufacturing software interoperability framework and a capability profiling methodology which were proposed and developed through this international standardization activity. Within the context of manufacturing application, a manufacturing software unit is considered to be capable of performing a specific set of function defined by a manufacturing software system architecture. A manufacturing software interoperability framework consists of a set of elements and rules for describing the capability of software units to support the requirements of a manufacturing application. The capability profiling methodology makes use of the domain-specific attributes and methods associated with each specific software unit to describe capability profiles in terms of unit name, manufacturing functions, and other needed class properties. In this methodology, manufacturing software requirements are expressed in terns of software unit capability profiles.
Effect of fuel/air nonuniformity on nitric oxide emissions
NASA Technical Reports Server (NTRS)
Lyons, V. J.
1979-01-01
A flame tube combustor holding jet A fuel was used in experiments performed at a pressure of .3 Mpa and a reference velocity of 25 meters/second for three inlet air temperatures of 600, 700, and 800 K. The gas sample measurements were taken at locations 18 cm and 48 cm downstream of the perforated plate flameholder. Nonuniform fuel/air profiles were produced using a fuel injector by separately fueling the inner five fuel tubes and the outer ring of twelve fuel tubes. Six fuel/air profiles were produced for nominal overall equivalence ratios of .5 and .6. An example of three of three of these profiles and their resultant nitric oxide NOx emissions are presented. The uniform fuel/air profile cases produced uniform and relatively low profile levels. When the profiles were either center-peaked or edge-peaked, the overall mass-weighted nitric oxide levels increased.
Objective Classification of Radar Profile Types, and Their Relationship to Lightning Occurrence
NASA Technical Reports Server (NTRS)
Boccippio, Dennis
2003-01-01
A cluster analysis technique is used to identify 16 "archetypal" vertical radar profile types from a large, globally representative sample of profiles from the TRMM Precipitation Radar. These include nine convective types (7 of these deep convective) and seven stratiform types (5 of these clearly glaciated). Radar profile classification provides an alternative to conventional deep convective storm metrics, such as 30 dBZ echo height, maximum reflectivity or VIL. As expected, the global frequency of occurrence of deep convective profile types matches satellite-observed total lightning production, including to very small scall local features. Each location's "mix" of profile types provides an objective description of the local convective spectrum, and in turn, is a first step in objectively classifying convective regimes. These classifiers are tested as inputs to a neural network which attempts to predict lightning occurrence based on radar-only storm observations, and performance is compared with networks using traditional radar metrics as inputs.
Road profile estimation of city roads using DTPS
NASA Astrophysics Data System (ADS)
Wang, Qi; McDaniel, J. Gregory; Sun, Nian X.; Wang, Ming L.
2013-04-01
This work presents a non-destructive and non-contact acoustic sensing approach for measuring road profile of road and bridge deck with vehicles running at normal speed without stopping traffic. This approach uses an instantaneous and real-time dynamic tire pressure sensor (DTPS) that can measure dynamic response of the tire-road interaction and increases the efficiency of currently used road profile measuring systems with vehicle body-mounted profilers and axle-mounted accelerometers. In this work, a prototype of real-time DTPS system has been developed and demonstrated on a testing van at speeds from 5 to 80 miles per hour (mph). A data analysis algorithm has been developed to remove axle dynamic motions from the measured DTPS data and to find the transfer function between dynamic tire pressure change and the road profile. Field test has been performed to estimate road profiles. The road profile resolution is approximately 5 to 10 cm in width and sensitivity is 0. 3 cm for the height road surface features at driving speeds of 5 to 80 mph.
Van Dijk, Fiona E; Mostert, Jeannette; Glennon, Jeffrey; Onnink, Marten; Dammers, Janneke; Vasquez, Alejandro Arias; Kan, Cornelis; Verkes, Robbert Jan; Hoogman, Martine; Franke, Barbara; Buitelaar, Jan K
2017-12-01
Deficits in multiple neuropsychological domains and specific personality profiles have been observed in attention-deficit/hyperactivity disorder (ADHD). In this study we investigated whether personality traits are related to neurocognitive profiles in adults with ADHD. Neuropsychological performance and Five Factor Model (FFM) personality traits were measured in adults with ADHD (n = 133) and healthy controls (n = 132). Three neuropsychological profiles, derived from previous community detection analyses, were investigated for personality trait differences. Irrespective of cognitive profile, participants with ADHD showed significantly higher Neuroticism and lower Extraversion, Agreeableness, and Conscientiousness than healthy controls. Only the FFM personality factor Openness differed significantly between the three profiles. Higher Openness was more common in those with aberrant attention and inhibition than those with increased delay discounting and atypical working memory / verbal fluency. The results suggest that the personality trait Openness, but not any other FFM factor, is linked to neurocognitive profiles in ADHD. ADHD symptoms rather than profiles of cognitive impairment have associations with personality traits. Copyright © 2017 Elsevier B.V. All rights reserved.
2012-01-01
Background The consensus profiling method was introduced to overcome the exaggerated stochastic effects associated with low copy number DNA typing. However, little empirical evidence has been provided which shows that a consensus profile, derived from dividing a sample into separate aliquots and including only alleles seen at least twice, gives the most informative profile, compared to a profile obtained by amplifying the entire low template DNA extract in one reaction. Therefore, this study aimed to investigate the quality of consensus profiles compared to profiles obtained using the whole low template extract for amplification. Methods A total of 100 pg and 25 pg DNA samples were amplified with the PowerPlex® ESI 16 Kits using 30 or 34 PCR cycles. A total of 100 pg and 25 pg DNA samples were then divided into three aliquots for a 34-cycle PCR and a consensus profile derived that included alleles that appeared in at least two of the replicates. Profiles from the non-split samples were compared to the consensus profiles focusing on peak heights, allele drop out, locus drop out and allele drop in. Results Performing DNA profiling on non-split extracts produced profiles with a higher percentage of correct loci compared to the consensus profiling technique. Consensus profiling did eliminate any spurious alleles from the final profile. However, there was a notable increase in allele and locus drop out when a LTDNA sample was divided prior to amplification. Conclusions The loss of information that occurs when a sample is split for amplification indicates that consensus profiling may not be producing the most informative DNA profile for samples where the template amount is limited. PMID:22748106
Effect of Age Group on Technical-Tactical Performance Profile of the Serve in Men's Volleyball.
García-de-Alcaraz, Antonio; Ortega, Enrique; Palao, José M
2016-10-01
The aim of this study was to analyze the technical-tactical performance profile of the serve for various age groups and categories of competition in men's volleyball. The sample comprised 13,262 serves performed by 986 players in 299 sets observed in various categories of competition (U-14, U-16, U-19, national senior, and international senior). An observational design was used. The variables studied were category of competition, type of execution, and serve performance. The results showed that for higher age groups (senior categories), there were significantly fewer jump serves and poorer serve performance, regardless of players' maturity and training development. The use of the jump serves increased the serve risk while attempting to hinder the organization of the opponent attack. This paper discusses the serve evolution and the implications on the training process at the different age groups in men's volleyball. © The Author(s) 2016.
Fitness testing of tennis players: How valuable is it?
Fernandez-Fernandez, Jaime; Ulbricht, Alexander; Ferrauti, Alexander
2014-01-01
In tennis, sport-specific technical skills are predominant factors, although a complex profile of physical performance factors is also required. The fitness test batteries assist in examining tennis players’ capabilities for performance at different levels in the laboratory as well as in the field, in the junior or elite level. While laboratory tests can be, and are, used to evaluate basic performance characteristics of athletes in most individual sports, in a more specific approach, field-based methods are better suited to the demands of complex intermittent sports like tennis. A regular test battery performed at different periods of the year allows to obtain an individual's performance profile, as well as the ability to prescribe individual training interventions. Thus, the aim of the present review was to describe and evaluate the different physical tests recommended and used by practitioners, sports scientists and institutions (national tennis federations). PMID:24668375
Molecular profiling of single circulating tumor cells from lung cancer patients.
Park, Seung-Min; Wong, Dawson J; Ooi, Chin Chun; Kurtz, David M; Vermesh, Ophir; Aalipour, Amin; Suh, Susie; Pian, Kelsey L; Chabon, Jacob J; Lee, Sang Hun; Jamali, Mehran; Say, Carmen; Carter, Justin N; Lee, Luke P; Kuschner, Ware G; Schwartz, Erich J; Shrager, Joseph B; Neal, Joel W; Wakelee, Heather A; Diehn, Maximilian; Nair, Viswam S; Wang, Shan X; Gambhir, Sanjiv S
2016-12-27
Circulating tumor cells (CTCs) are established cancer biomarkers for the "liquid biopsy" of tumors. Molecular analysis of single CTCs, which recapitulate primary and metastatic tumor biology, remains challenging because current platforms have limited throughput, are expensive, and are not easily translatable to the clinic. Here, we report a massively parallel, multigene-profiling nanoplatform to compartmentalize and analyze hundreds of single CTCs. After high-efficiency magnetic collection of CTC from blood, a single-cell nanowell array performs CTC mutation profiling using modular gene panels. Using this approach, we demonstrated multigene expression profiling of individual CTCs from non-small-cell lung cancer (NSCLC) patients with remarkable sensitivity. Thus, we report a high-throughput, multiplexed strategy for single-cell mutation profiling of individual lung cancer CTCs toward minimally invasive cancer therapy prediction and disease monitoring.
RF slice profile effects in magnetic resonance fingerprinting.
Hong, Taehwa; Han, Dongyeob; Kim, Min-Oh; Kim, Dong-Hyun
2017-09-01
The radio frequency (RF) slice profile effects on T1 and T2 estimation in magnetic resonance fingerprinting (MRF) are investigated with respect to time-bandwidth product (TBW), flip angle (FA) level and field inhomogeneities. Signal evolutions are generated incorporating the non-ideal slice selective excitation process using Bloch simulation and matched to the original dictionary with and without the non-ideal slice profile taken into account. For validation, phantom and in vivo experiments are performed at 3T. Both simulations and experiments results show that T1 and T2 error from non-ideal slice profile increases with increasing FA level, off-resonance, and low TBW values. Therefore, RF slice profile effects should be compensated for accurate determination of the MR parameters. Copyright © 2017 Elsevier Inc. All rights reserved.
Gaseous hydrogen/oxygen injector performance characterization
NASA Technical Reports Server (NTRS)
Degroot, W. A.; Tsuei, H. H.
1994-01-01
Results are presented of spontaneous Raman scattering measurements in the combustion chamber of a 110 N thrust class gaseous hydrogen/oxygen rocket. Temperature, oxygen number density, and water number density profiles at the injector exit plane are presented. These measurements are used as input profiles to a full Navier-Stokes computational fluid dynamics (CFD) code. Predictions of this code while using the measured profiles are compared with predictions while using assumed uniform injector profiles. Axial and radial velocity profiles derived from both sets of predictions are compared with Rayleigh scattering measurements in the exit plane of a 33:1 area ratio nozzle. Temperature and number density Raman scattering measurements at the exit plane of a test rocket with a 1:1.36 area ratio nozzle are also compared with results from both sets of predictions.
Buyong, Muhamad Ramdzan; Larki, Farhad; Faiz, Mohd Syafiq; Hamzah, Azrul Azlan; Yunas, Jumrail; Majlis, Burhanuddin Yeop
2015-01-01
In this work, the dielectrophoretic force (FDEP) response of Aluminium Microelectrode Arrays with tapered profile is investigated through experimental measurements and numerical simulations. A standard CMOS processing technique with a step for the formation of a tapered profile resist is implemented in the fabrication of Tapered Aluminium Microelectrode Arrays (TAMA). The FDEP is investigated through analysis of the Clausius-Mossotti factor (CMF) and cross-over frequency (fxo). The performance of TAMA with various side wall angles is compared to that of microelectrodes with a straight cut sidewall profile over a wide range of frequencies through FEM numerical simulations. Additionally, electric field measurement (EFM) is performed through scanning probe microscopy (SPM) in order to obtain the region of force focus in both platforms. Results showed that the tapered profile microelectrodes with angles between 60° and 70° produce the highest electric field gradient on the particles. Also, the region of the strongest electric field in TAMA is located at the bottom and top edge of microelectrode while the strongest electric field in microelectrodes with straight cut profile is found at the top corner of the microelectrode. The latter property of microelectrodes improves the probability of capturing/repelling the particles at the microelectrode’s side wall. PMID:25970255
Buyong, Muhamad Ramdzan; Larki, Farhad; Faiz, Mohd Syafiq; Hamzah, Azrul Azlan; Yunas, Jumrail; Majlis, Burhanuddin Yeop
2015-05-11
In this work, the dielectrophoretic force (F(DEP)) response of Aluminium Microelectrode Arrays with tapered profile is investigated through experimental measurements and numerical simulations. A standard CMOS processing technique with a step for the formation of a tapered profile resist is implemented in the fabrication of Tapered Aluminium Microelectrode Arrays (TAMA). The F(DEP) is investigated through analysis of the Clausius-Mossotti factor (CMF) and cross-over frequency (f(xo)). The performance of TAMA with various side wall angles is compared to that of microelectrodes with a straight cut sidewall profile over a wide range of frequencies through FEM numerical simulations. Additionally, electric field measurement (EFM) is performed through scanning probe microscopy (SPM) in order to obtain the region of force focus in both platforms. Results showed that the tapered profile microelectrodes with angles between 60° and 70° produce the highest electric field gradient on the particles. Also, the region of the strongest electric field in TAMA is located at the bottom and top edge of microelectrode while the strongest electric field in microelectrodes with straight cut profile is found at the top corner of the microelectrode. The latter property of microelectrodes improves the probability of capturing/repelling the particles at the microelectrode's side wall.
Buttini, Francesca; Pasquali, Irene; Brambilla, Gaetano; Copelli, Diego; Alberi, Massimiliano Dagli; Balducci, Anna Giulia; Bettini, Ruggero; Sisti, Viviana
2016-03-01
The aim of this work was to evaluate the effect of two different dry powder inhalers, of the NGI induction port and Alberta throat and of the actual inspiratory profiles of asthmatic patients on in-vitro drug inhalation performances. The two devices considered were a reservoir multidose and a capsule-based inhaler. The formulation used to test the inhalers was a combination of formoterol fumarate and beclomethasone dipropionate. A breath simulator was used to mimic inhalatory patterns previously determined in vivo. A multivariate approach was adopted to estimate the significance of the effect of the investigated variables in the explored domain. Breath simulator was a useful tool to mimic in vitro the in vivo inspiratory profiles of asthmatic patients. The type of throat coupled with the impactor did not affect the aerodynamic distribution of the investigated formulation. However, the type of inhaler and inspiratory profiles affected the respirable dose of drugs. The multivariate statistical approach demonstrated that the multidose inhaler, released efficiently a high fine particle mass independently from the inspiratory profiles adopted. Differently, the single dose capsule inhaler, showed a significant decrease of fine particle mass of both drugs when the device was activated using the minimum inspiratory volume (592 mL).
Tozzo, Pamela; Giuliodori, Alice; Rodriguez, Daniele; Caenazzo, Luciana
2014-03-01
We conducted a study on the effect of fingerprint enhancement methods on subsequent short tandem repeat profiling. First, we performed a study typing blood traces deposited on 5 different surfaces, treated with 8 types of dactyloscopic powders. Three different DNA extraction methods were used. Subsequently, we analyzed latent fingerprints on the same 5 surfaces enhanced with the 8 different powders used in the first part of the study. This study has demonstrated that DNA profiling can be performed on fingerprints left on different substrates, and the substrate will affect the amount of DNA that can be recovered for DNA typing. In the first phase of the study, a profile was obtained in 92% of the 120 samples analyzed; in the second part, in 55% of the 80 samples analyzed, we obtained a profile complete in 32.5% of the cases. From the results obtained, it seems that the powders used in latent fingerprints enhancement, rather than having a direct inhibitory effect on extraction and amplification of DNA, may cause partial degradation of DNA, reducing the efficiency of amplification reaction. It should not be forgotten that these results were obtained under laboratory conditions, and in real caseworks, there may still be different problems involved.
USDA-ARS?s Scientific Manuscript database
Acoustic Doppler velocimetry has made high-resolution turbulence measurements in sediment-laden flows possible. Recent developments have resulted in a commercially available lab-scale acoustic Doppler profiling device, a Nortek Vectrino II, that allows for three-dimensional velocity data to be colle...
Self-Perceived Levels of Responsibility in Seventh Grade Students.
ERIC Educational Resources Information Center
Martello, Chris
This study, conducted at Churchill Junior High School in Royal Oak, Michigan, examined the effectiveness of the Student Responsibility Profile (SRP)and investigated the attitudes of eighth grade students and teachers toward the SRP. The profile allows staff members to evaluate student responsibility performance in 10 areas and allows students to…
USDA-ARS?s Scientific Manuscript database
A rapid computer-aided program for profiling glucosinolates, “GLS-Finder", was developed. GLS-Finder is a Matlab script based expert system that is capable for qualitative and semi-quantitative analysis of glucosinolates in samples using data generated by ultra-high performance liquid chromatograph...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kim, Hang Bae
A reliability testing was performed for the software of Shutdown(SDS) Computers for Wolsong Nuclear Power Plants Units 2, 3 and 4. profiles to the SDS Computers and compared the outputs with the predicted results generated by the oracle. Test softwares were written to execute the test automatically. Random test profiles were generated using analysis code. 11 refs., 1 fig.
USDA-ARS?s Scientific Manuscript database
Leaves of greenhouse-grown ‘Hamlin’ and ‘Valencia’ orange (Citrus sinensis L.) seedlings were analyzed by high performance liquid chromatography in a study of the progression of changes in secondary metabolite profiles resulting from infection by Candidatus Liberibacter asiaticus (CLas), the Huanglo...
Partnership for a Nation of Learners: Joining Forces, Creating Value
ERIC Educational Resources Information Center
Kulpinski, Dan
2009-01-01
This publication presents in-depth profiles of six high-performing partnerships funded by the Partnership for a Nation of Learners (PNL) and short profiles of the remaining grantees. The partnerships illustrate a range of examples of how museums, libraries, public broadcasters, and other vital community organizations can collaborate to address…
An Investigation of Cognitive Skills and Behavior in High Ability Students
ERIC Educational Resources Information Center
Alloway, Tracy Packiam; Elsworth, Miquela
2012-01-01
The purpose of this study was to investigate the cognitive and behavioral profiles of high ability students. Performance on measures of verbal and visuo-spatial working memory and general ability (vocabulary and block design) was compared across the following groups: high, average, and low ability students. The behavioral profile of high ability…
eTeacher: Providing Personalized Assistance to E-Learning Students
ERIC Educational Resources Information Center
Schiaffino, Silvia; Garcia, Patricio; Amandi, Analia
2008-01-01
In this paper we present eTeacher, an intelligent agent that provides personalized assistance to e-learning students. eTeacher observes a student's behavior while he/she is taking online courses and automatically builds the student's profile. This profile comprises the student's learning style and information about the student's performance, such…
WAIS-R Verbal and Performance Profiles of Adolescents Referred for Atypical Learning Styles.
ERIC Educational Resources Information Center
Rush, Pamela; And Others
This study investigated Wechsler Adult Intelligence Scale-Revised (WAIS-R) profiles of deaf adolescents referred for academic difficulties. In addition, differences between referral deaf students and non-referral deaf peers were explored. The sample consisted of 28 severely-to-profoundly hearing impaired students enrolled in the School of…
The Cognitive Profile of Adult Dyslexics and Its Relation to Their Reading Abilities
ERIC Educational Resources Information Center
Beidas, Hanin; Khateb, Asaid; Breznitz, Zvia
2013-01-01
The question of which cognitive impairments are primarily associated with dyslexia has been a source of continuous debate. This study examined the cognitive profile of Hebrew-speaking compensated adult dyslexics and investigated whether their cognitive abilities accounted for a unique variance in their reading performance. Sixty-nine young adults…
Cady, John W.
1977-01-01
A computer program is presented which performs, for one or more bodies, along a profile perpendicular to strike, both forward calculations for the magnetic and gravity anomaly fields and independent gravity and magnetic inverse calculations for density and susceptibility or remanent magnetization.
BC Transfer Students: Profile and Performance Report (2008/09-2012/13)
ERIC Educational Resources Information Center
Tikina, Anna
2015-01-01
The British Columbia (BC) Council on Admissions and Transfer has been periodically publishing BC College Transfer Student Profile reports for almost 25 years. Historically, these reports tracked the mobility of students from colleges and institutes to degree granting research-intensive universities in BC, the pathway which is often referred to as…
A Profile of Effective Leadership in Some South African High-Poverty Schools
ERIC Educational Resources Information Center
Kamper, Gerrit
2008-01-01
The struggle of high-poverty schools for survival is well documented. Some have overcome poverty-related odds and performed exceptionally well, prompting the following research question: What elements constitute a profile of effective leadership in high-poverty schools? Investigations conducted at six successful high-poverty schools revealed the…
Gender Differences in Risk/Protection Profiles for Low Academic Performance
ERIC Educational Resources Information Center
Whitney, Stephen D.; Renner, Lynette M.; Herrenkohl, Todd I.
2010-01-01
Using holistic-interactionistic theory, the simultaneous nature of risk and protection factors for both males and females (age 6-11 in Wave 1) is examined using latent profile analysis (LPA). Risk/protection classes are estimated using multiple risk factor variables (e.g., physical child abuse) and multiple protective factors (e.g.,…
Some Innovative Methods to Improve Profiles Derivation
ERIC Educational Resources Information Center
Pei, Lai Kwan
2008-01-01
As the government aimed to provide appropriate education to all children (No Child Left Behind Act), it is important that the education providers can assess the performance of the students correctly so that they can provide the appropriate education for the students. Profile analysis is a very useful tool to interpret test scores and measure…
A top-down systems biology view of microbiome-mammalian metabolic interactions in a mouse model
Martin, François-Pierre J; Dumas, Marc-Emmanuel; Wang, Yulan; Legido-Quigley, Cristina; Yap, Ivan K S; Tang, Huiru; Zirah, Séverine; Murphy, Gerard M; Cloarec, Olivier; Lindon, John C; Sprenger, Norbert; Fay, Laurent B; Kochhar, Sunil; van Bladeren, Peter; Holmes, Elaine; Nicholson, Jeremy K
2007-01-01
Symbiotic gut microorganisms (microbiome) interact closely with the mammalian host's metabolism and are important determinants of human health. Here, we decipher the complex metabolic effects of microbial manipulation, by comparing germfree mice colonized by a human baby flora (HBF) or a normal flora to conventional mice. We perform parallel microbiological profiling, metabolic profiling by 1H nuclear magnetic resonance of liver, plasma, urine and ileal flushes, and targeted profiling of bile acids by ultra performance liquid chromatography–mass spectrometry and short-chain fatty acids in cecum by GC-FID. Top-down multivariate analysis of metabolic profiles reveals a significant association of specific metabotypes with the resident microbiome. We derive a transgenomic graph model showing that HBF flora has a remarkably simple microbiome/metabolome correlation network, impacting directly on the host's ability to metabolize lipids: HBF mice present higher ileal concentrations of tauro-conjugated bile acids, reduced plasma levels of lipoproteins but higher hepatic triglyceride content associated with depletion of glutathione. These data indicate that the microbiome modulates absorption, storage and the energy harvest from the diet at the systems level. PMID:17515922
Emergent literacy profiles of preschool-age children with specific language impairment.
Cabell, Sonia Q; Lomax, Richard G; Justice, Laura M; Breit-Smith, Allison; Skibbe, Lori E; McGinty, Anita S
2010-12-01
The primary aim of the present study was to explore the heterogeneity of emergent literacy skills among preschool-age children with specific language impairment (SLI) through examination of profiles of performance. Fifty-nine children with SLI were assessed on a battery of emergent literacy skills (i.e., alphabet knowledge, print concepts, emergent writing, rhyme awareness) and oral language skills (i.e., receptive/expressive vocabulary and grammar). Cluster analysis techniques identified three emergent literacy profiles: (1) Highest Emergent Literacy, Strength in Alphabet Knowledge; (2) Average Emergent Literacy, Strength in Print Concepts; and (3) Lowest Emergent Literacy across Skills. After taking into account the contribution of child age, receptive and expressive language skills made a small contribution to the prediction of profile membership. The present findings, which may be characterized as exploratory given the relatively modest sample size, suggest that preschool-age children with SLI display substantial individual differences with regard to their emergent literacy skills and that these differences cannot be fully determined by children's age or oral language performance. Replication of the present findings with a larger sample of children is needed.
Global metabolic profiling procedures for urine using UPLC-MS.
Want, Elizabeth J; Wilson, Ian D; Gika, Helen; Theodoridis, Georgios; Plumb, Robert S; Shockcor, John; Holmes, Elaine; Nicholson, Jeremy K
2010-06-01
The production of 'global' metabolite profiles involves measuring low molecular-weight metabolites (<1 kDa) in complex biofluids/tissues to study perturbations in response to physiological challenges, toxic insults or disease processes. Information-rich analytical platforms, such as mass spectrometry (MS), are needed. Here we describe the application of ultra-performance liquid chromatography-MS (UPLC-MS) to urinary metabolite profiling, including sample preparation, stability/storage and the selection of chromatographic conditions that balance metabolome coverage, chromatographic resolution and throughput. We discuss quality control and metabolite identification, as well as provide details of multivariate data analysis approaches for analyzing such MS data. Using this protocol, the analysis of a sample set in 96-well plate format, would take ca. 30 h, including 1 h for system setup, 1-2 h for sample preparation, 24 h for UPLC-MS analysis and 1-2 h for initial data processing. The use of UPLC-MS for metabolic profiling in this way is not faster than the conventional HPLC-based methods but, because of improved chromatographic performance, provides superior metabolome coverage.
Morón, María José; Luque, Rafael; Casilari, Eduardo
2014-01-01
This paper evaluates and characterizes the technical performance of medical wireless personal area networks (WPANs) that are based on smartphones. For this purpose, a prototype of a health telemonitoring system is presented. The prototype incorporates a commercial Android smartphone, which acts as a relay point, or “gateway”, between a set of wireless medical sensors and a data server. Additionally, the paper investigates if the conventional capabilities of current commercial smartphones can be affected by their use as gateways or “Holters” in health monitoring applications. Specifically, the profiling has focused on the CPU and power consumption of the mobile devices. These metrics have been measured under several test conditions modifying the smartphone model, the type of sensors connected to the WPAN, the employed Bluetooth profile (SPP (serial port profile) or HDP (health device profile)), the use of other peripherals, such as a GPS receiver, the impact of the use of the Wi-Fi interface or the employed method to encode and forward the data that are collected from the sensors. PMID:24451456
Morón, María José; Luque, Rafael; Casilari, Eduardo
2014-01-02
This paper evaluates and characterizes the technical performance of medical wireless personal area networks (WPANs) that are based on smartphones. For this purpose,a prototype of a health telemonitoring system is presented. The prototype incorporates a commercial Android smartphone, which acts as a relay point, or "gateway", between a set of wireless medical sensors and a data server. Additionally, the paper investigates if the conventional capabilities of current commercial smartphones can be affected by their use as gateways or "Holters" in health monitoring applications. Specifically, the profiling has focused on the CPU and power consumption of the mobile devices. These metrics have been measured under several test conditions modifying the smartphone model, the type of sensors connected to the WPAN, the employed Bluetooth profile (SPP (serial port profile) orHDP (health device profile)), the use of other peripherals, such as a GPS receiver, the impact of the use of the Wi-Fi interface or the employed method to encode and forward the data that are collected from the sensors.
NASA Technical Reports Server (NTRS)
Prabhakara, C.; Iacovazzi, R., Jr.; Yoo, J.-M.; Weinman, J. A.; Lau, William K. M. (Technical Monitor)
2001-01-01
Observations of brightness temperature, Tb made over land regions by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) radiometer have been analyzed along with the nearly simultaneous measurements of the vertical profiles of reflectivity factor, Z, made by the Precipitation Radar (PR) onboard the TRMM satellite. This analysis is performed to explore the interrelationship between the TMI and PR data in areas that are covered predominantly by convective or stratiform rain. In particular, we have compared on a scale of 20 km, average vertical profiles of Z with the averages of Tbs in the 19, 37 and 85 GHz channels. Generally, we find from these data that as Z increases, Tbs in the three channels decrease due to extinction. In order to explain physically the relationship between the Tb and Z observations, we have performed radiative transfer simulations utilizing vertical profiles of hydrometeors applicable to convective and stratiform rain regions. These profiles are constructed taking guidance from the Z observations of PR and recent LDR and ZDR measurements made by land-based polarimetric radars.
Work-to-Family Enrichment and Conflict Profiles: Job Characteristics and Employees' Well-Being.
Carvalho, Vânia Sofia; Chambel, Maria José
2016-10-03
This article aims to analyze work-to-family conflict (WFC) and enrichment (WFE) profiles related to job characteristics and well-being at work and general well-being. A cross-sectional survey data of 1885 employees was analyzed. The Latent Profile Analysis revealed that the five-profile solution exhibited strong statistical significance (p > .001). ANCOVAs were performed to analyze the relationship of the identified profiles with job characteristics and well-being. Employees in the Beneficial profile had the best perception of job characteristics (lowest demands and the highest control and support) and the highest well-being, and those in the Harmful profile had the lowest job characteristics perceptions and the lowest well-being. Through a comparison of the Moderate Active profile and the Moderate Harmful profile, WFE was found to buffer the effects of the WFC on well-being at work (burnout; engagement) and on general well-being (i.e., health perceptions). The promotion of WFE through higher job autonomy, job support, and fewer demands is a crucial aspect to consider. This study helps to consolidate the work-family balance typology and its effects on employees' well-being, and broadens this framework to consider job characteristics.
NASA Astrophysics Data System (ADS)
Haase, J. S.; Xie, F.; Muradyan, P.; Garrison, J. L.; Lulich, T.; Voo, J.; Larson, K. M.
2008-12-01
The Airborne GNSS Instrument System for Multistatic and Occultation Sensing (GISMOS) was deployed on the NCAR HIAPER (High-performance Instrumented Airborne Platform for Environmental Research) aircraft to make atmospheric observations over the Gulf of Mexico coastal region in February 2008. The objective of the measurements was to test the performance of the system in comparisons with radiosonde profiles and dropsonde profiles that were also collected during the field campaign. The airborne GNSS radio occultation measures of GNSS signals from satellites that are setting or rising behind the Earth's limb relative to the receiver on board an aircraft. High-gain side-looking antennas and a 10MHz GPS Recording System that records the raw RF signal make this set of instrumentation unique, and especially adapted for open-loop tracking observations in the lower atmosphere. Measurements of the amount of refraction in the signal ray paths are inverted using an Abel transform procedure to retrieve a profile of refractivity, which depends on atmospheric pressure, temperature and relative humidity. The airborne geometry, in contrast to the space- borne satellite occultation geometry, is affected by a large drift in the tangent point location, that is the location of the closest point to the Earth surface, as the ray path descends in the atmosphere. Therefore plans for the validation campaign included releasing dropsondes in the plane of the line of sight of the satellite-receiver occultation geometry in order to study this effect. Careful timing and location of the flight path was used to coordinate occultation times with operational and supplementary radiosonde launches. A total of 6 days of balloon sounding data were collected with 20 dropsondes and 28 supplementary radiosonde profiles. A discussion of the technical performance of the system will be presented, which describes the signal characteristics and antenna performance. Preliminary results on the quality of retrieved refractivity profiles will also be shown.
Effects of radial diffuser hydraulic design on a double-suction centrifugal pump
NASA Astrophysics Data System (ADS)
Hou, H. C.; Zhang, Y. X.; Xu, C.; Zhang, J. Y.; Li, Z. L.
2016-05-01
In order to study effects of radial diffuser on hydraulic performance of crude oil pump, the steady CFD numerical method is applied and one large double-suction oil pump running in long-distance pipeline is considered. The research focuses on analysing the influence of its diffuser vane profile on hydraulic performance of oil pump. The four different types of cylindrical vane have been designed by in-house codes mainly including double arcs (DA), triple arcs (TA), equiangular spiral line (ES) and linear variable angle spiral line (LVS). During design process diffuser vane angles at inlet and outlet are tentatively given within a certain range and then the wrapping angle of the four types of diffuser vanes can be calculated automatically. Under the given inlet and outlet angles, the linear variable angle spiral line profile has the biggest wrapping angle and profile length which is good to delay channel diffusion but bring more friction hydraulic loss. Finally the vane camber line is thickened at the certain uniform thickness distribution and the 3D diffuser models are generated. The whole flow passage of oil pump with different types of diffusers under various flow rate conditions are numerically simulated based on RNG k-ɛ turbulent model and SIMPLEC algorithm. The numerical results show that different types of diffusers can bring about great difference on the hydraulic performance of oil pump, of which the ES profile diffuser with its proper setting angle shows the best hydraulic performance and its inner flow field is improved obviously. Compared with the head data from model sample, all designed diffusers can make a certain improvement on head characteristic. At the large flow rate conditions the hydraulic efficiency increases obviously and the best efficiency point shift to the large flow rate range. The ES profile diffuser embodies the better advantages on pump performance which can be explained theoretically that the diffuser actually acts as a diffusion device and is good to transform the dynamic energy to pressure energy. Then through the hydraulic loss analysis of each pump component for all diffusers, it shows that the impeller takes up the biggest part of the whole loss about 8.19% averagely, the radial diffuser about 3.70% and the volute about 1.65%. The hydraulic loss of impeller is dominant at the large flow rate while the radial diffuser is at the small flow rate. Among all diffusers, the ES profile diffuser generates the least loss and combined to the distribution of velocity vector and turbulent kinetic energy for two kinds of diffusers it also shows that ES profile is fit to apply in radial diffuser. This research can offer a significant reference for the radial diffuser hydraulic design of such centrifugal pumps.
NASA Technical Reports Server (NTRS)
Seftor, C. J.; Jaross, G.; Kowitt, M.; Haken, M.; Li, J.; Flynn, L. E.
2014-01-01
The prelaunch specifications for nadir sensors of the Ozone Mapping and Profiler Suite (OMPS) were designed to ensure that measurements from them could be used to retrieve total column ozone and nadir ozone profile information both for operational use and for use in long-term ozone data records. In this paper, we will show results from our extensive analysis of the performance of the nadir mapper (NM) and nadir profiler (NP) sensors during the first year and a half of OMPS nadir operations. In most cases, we determined that both sensors meet or exceed their prelaunch specifications. Normalized radiance (radiance divided by irradiance) measurements have been determined to be well within their 2% specification for both sensors. In the case of stray light, the NM sensor is within its 2% specification for all but the shortest wavelengths, while the NP sensor is within its 2% specification for all but the longest wavelengths. Artifacts that negatively impacted the sensor calibration due to diffuser features were reduced to less than 1% through changes made in the solar calibration sequence. Preliminary analysis of the disagreement between measurements made by the NM and NP sensors in the region where their wavelengths overlap indicates that it is due to shifts in the shared dichroic filter after launch and that it can be corrected. In general, our analysis indicates that both the NM and NP sensors are performing well, that they are stable, and that any deviations from nominal performance can be well characterized and corrected.
NASA Technical Reports Server (NTRS)
Bauman, William H., III; Flinn, Clay
2013-01-01
On the day of launch, the 45th Weather Squadron (45 WS) Launch Weather Officers (LWOs) monitor the upper-level winds for their launch customers. During launch operations, the payload/launch team sometimes asks the LWOs if they expect the upper-level winds to change during the countdown. The LWOs used numerical weather prediction model point forecasts to provide the information, but did not have the capability to quickly retrieve or adequately display the upper-level observations and compare them directly in the same display to the model point forecasts to help them determine which model performed the best. The LWOs requested the Applied Meteorology Unit (AMU) develop a graphical user interface (GUI) that will plot upper-level wind speed and direction observations from the Cape Canaveral Air Force Station (CCAFS) Automated Meteorological Profiling System (AMPS) rawinsondes with point forecast wind profiles from the National Centers for Environmental Prediction (NCEP) North American Mesoscale (NAM), Rapid Refresh (RAP) and Global Forecast System (GFS) models to assess the performance of these models. The AMU suggested adding observations from the NASA 50 MHz wind profiler and one of the US Air Force 915 MHz wind profilers, both located near the Kennedy Space Center (KSC) Shuttle Landing Facility, to supplement the AMPS observations with more frequent upper-level profiles. Figure 1 shows a map of KSC/CCAFS with the locations of the observation sites and the model point forecasts.
Tan, Yen Hock; Huang, He; Kihara, Daisuke
2006-08-15
Aligning distantly related protein sequences is a long-standing problem in bioinformatics, and a key for successful protein structure prediction. Its importance is increasing recently in the context of structural genomics projects because more and more experimentally solved structures are available as templates for protein structure modeling. Toward this end, recent structure prediction methods employ profile-profile alignments, and various ways of aligning two profiles have been developed. More fundamentally, a better amino acid similarity matrix can improve a profile itself; thereby resulting in more accurate profile-profile alignments. Here we have developed novel amino acid similarity matrices from knowledge-based amino acid contact potentials. Contact potentials are used because the contact propensity to the other amino acids would be one of the most conserved features of each position of a protein structure. The derived amino acid similarity matrices are tested on benchmark alignments at three different levels, namely, the family, the superfamily, and the fold level. Compared to BLOSUM45 and the other existing matrices, the contact potential-based matrices perform comparably in the family level alignments, but clearly outperform in the fold level alignments. The contact potential-based matrices perform even better when suboptimal alignments are considered. Comparing the matrices themselves with each other revealed that the contact potential-based matrices are very different from BLOSUM45 and the other matrices, indicating that they are located in a different basin in the amino acid similarity matrix space.
González, Jorge Ernesto; Radl, Analía; Romero, Ivonne; Barquinero, Joan Francesc; García, Omar; Di Giorgio, Marina
2016-12-01
Mitotic Index (MI) estimation expressed as percentage of mitosis plays an important role as quality control endpoint. To this end, MI is applied to check the lot of media and reagents to be used throughout the assay and also to check cellular viability after blood sample shipping, indicating satisfactory/unsatisfactory conditions for the progression of cell culture. The objective of this paper was to apply the CellProfiler open-source software for automatic detection of mitotic and nuclei figures from digitized images of cultured human lymphocytes for MI assessment, and to compare its performance to that performed through semi-automatic and visual detection. Lymphocytes were irradiated and cultured for mitosis detection. Sets of images from cultures were analyzed visually and findings were compared with those using CellProfiler software. The CellProfiler pipeline includes the detection of nuclei and mitosis with 80% sensitivity and more than 99% specificity. We conclude that CellProfiler is a reliable tool for counting mitosis and nuclei from cytogenetic images, saves considerable time compared to manual operation and reduces the variability derived from the scoring criteria of different scorers. The CellProfiler automated pipeline achieves good agreement with visual counting workflow, i.e. it allows fully automated mitotic and nuclei scoring in cytogenetic images yielding reliable information with minimal user intervention. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
NASA Astrophysics Data System (ADS)
Realpe Campaña, Julian David; Porsani, Jorge Luís; Bortolozo, Cassiano Antonio; Serejo de Oliveira, Gabriela; Monteiro dos Santos, Fernando Acácio
2017-03-01
Results of a TEM profile by using the fixed-loop array and an analysis of the induced magnetic field are presented in this work performed in the northwest region of São Paulo State, Brazil, Paraná Basin. The objectives of this research were to map the sedimentary and crystalline aquifers in the area and analyzing the behavior of the magnetic field by observation of magnetic profiles. TEM measurements in the three spatial components were taken to create magnetic profiles of the induced (secondary) magnetic field. The TEM data were acquired using a fixed transmitter loop of 200 m × 200 m and a 3D coil receiver moving along a profile line of 1000 m. Magnetic profiles of dBz, dBx and dBy components showed symmetrical spatial behavior related with loop geometry. z-component showed a behavior probably related to superparamagnetic effect (SPM). dBz data was used to perform individual 1D inversion for each position and to generate an interpolated pseudo-2D geoelectric profile. The results showed two low resistivity zones: the first shallow, between 10 m and 70 m deep, probably related to the Adamantina Formation (sedimentary aquifer). The second between 200 m and 300 m depth, probably related to a fractured zone filled with water or clay inside the basalt layer of the Serra Geral Formation (crystalline aquifer). These results agree with the well logs information available in the studied region.
Suppression effects in feature-based attention
Wang, Yixue; Miller, James; Liu, Taosheng
2015-01-01
Attending to a feature enhances visual processing of that feature, but it is less clear what occurs to unattended features. Single-unit recording studies in middle temporal (MT) have shown that neuronal modulation is a monotonic function of the difference between the attended and neuron's preferred direction. Such a relationship should predict a monotonic suppressive effect in psychophysical performance. However, past research on suppressive effects of feature-based attention has remained inconclusive. We investigated the suppressive effect for motion direction, orientation, and color in three experiments. We asked participants to detect a weak signal among noise and provided a partially valid feature cue to manipulate attention. We measured performance as a function of the offset between the cued and signal feature. We also included neutral trials where no feature cues were presented to provide a baseline measure of performance. Across three experiments, we consistently observed enhancement effects when the target feature and cued feature coincided and suppression effects when the target feature deviated from the cued feature. The exact profile of suppression was different across feature dimensions: Whereas the profile for direction exhibited a “rebound” effect, the profiles for orientation and color were monotonic. These results demonstrate that unattended features are suppressed during feature-based attention, but the exact suppression profile depends on the specific feature. Overall, the results are largely consistent with neurophysiological data and support the feature-similarity gain model of attention. PMID:26067533
Zhang, Li; Liu, Haiyu; Qin, Lingling; Zhang, Zhixin; Wang, Qing; Zhang, Qingqing; Lu, Zhiwei; Wei, Shengli; Gao, Xiaoyan; Tu, Pengfei
2015-02-01
A global chemical profiling based quality evaluation approach using ultra performance liquid chromatography with tandem quadrupole time-of-flight mass spectrometry was developed for the quality evaluation of three rhubarb species, including Rheum palmatum L., Rheum tanguticum Maxim. ex Balf., and Rheum officinale Baill. Considering that comprehensive detection of chemical components is crucial for the global profile, a systemic column performance evaluation method was developed. Based on this, a Cortecs column was used to acquire the chemical profile, and Chempattern software was employed to conduct similarity evaluation and hierarchical cluster analysis. The results showed R. tanguticum could be differentiated from R. palmatum and R. officinale at the similarity value 0.65, but R. palmatum and R. officinale could not be distinguished effectively. Therefore, a common pattern based on three rhubarb species was developed to conduct the quality evaluation, and the similarity value 0.50 was set as an appropriate threshold to control the quality of rhubarb. A total of 88 common peaks were identified by their accurate mass and fragmentation, and partially verified by reference standards. Through the verification, the newly developed method could be successfully used for evaluating the holistic quality of rhubarb. It would provide a reference for the quality control of other herbal medicines. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
NASA Astrophysics Data System (ADS)
Hazreek, Z. A. M.; Kamarudin, A. F.; Rosli, S.; Fauziah, A.; Akmal, M. A. K.; Aziman, M.; Azhar, A. T. S.; Ashraf, M. I. M.; Shaylinda, M. Z. N.; Rais, Y.; Ishak, M. F.; Alel, M. N. A.
2018-04-01
Geotechnical site investigation as known as subsurface profile evaluation is the process of subsurface layer characteristics determination which finally used for design and construction phase. Traditionally, site investigation was performed using drilling technique thus suffers from several limitation due to cost, time, data coverage and sustainability. In order to overcome those problems, this study adopted surface techniques using seismic refraction and ambient vibration method for subsurface profile depth evaluation. Seismic refraction data acquisition and processing was performed using ABEM Terraloc and OPTIM software respectively. Meanwhile ambient vibration data acquisition and processing was performed using CityShark II, Lennartz and GEOPSY software respectively. It was found that studied area consist of two layers representing overburden and bedrock geomaterials based on p-wave velocity value (vp = 300 – 2500 m/s and vp > 2500 m/s) and natural frequency value (Fo = 3.37 – 3.90 Hz) analyzed. Further analysis found that both methods show some good similarity in term of depth and thickness with percentage accuracy at 60 – 97%. Consequently, this study has demonstrated that the application of seismic refractin and ambient vibration method was applicable in subsurface profile depth and thickness estimation. Moreover, surface technique which consider as non-destructive method adopted in this study was able to compliment conventional drilling method in term of cost, time, data coverage and environmental sustainaibility.
Priya, Syama Hari; Prakasan, Nisha; Purushothaman, Jayamurthy
2017-01-01
The medicinally important phytochemicals present in Syzygium cumini seeds probably accounts for its wide use in traditional systems of medicines in India, like Ayurveda, Unani, and Siddha. The aim of the study was to determine the antioxidant potential of three different geographical variants of S. cumini seeds and to compare the phenolic profiling to know the effect of geographical variation in phenolic composition. Total phenolic and flavonoid content of S. cumini seeds were analyzed. Antioxidant activities in terms of 2,2-diphenyl-1-picrylhydrazyl, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid), nitric oxide and superoxide radical scavenging assays were performed. The most active fractions were subjected to high-performance liquid chromatography (HPLC) profiling to identify the phenolic composition. Among all the fractions, 70% methanol fraction of S. cumini seed showed significant antioxidant potential. There existed a linear correlation between phenolic content and antioxidant activity. HPLC profiling of 70% methanol (ME) fractions of all the variants revealed the presence of phenolic compounds with high concentrations of ellagic acid and gallic acid. The differences in phenolic concentration due to geographical changes might be the reason for higher antioxidant potential showed by 70% ME of Trivandrum variant. 70% methanolic fraction of S. cumini can act as a novel source of natural antioxidant.
Professional assessment of facial profile attractiveness.
Soh, Jen; Chew, Ming Tak; Wong, Hwee Bee
2005-08-01
The aim of this study was to compare the assessments of Chinese facial profile attractiveness by orthodontists and oral surgeons. The sample comprised 31 dental professionals (20 orthodontists, 11 oral surgeons) in an Asian community. Facial profile photographs and lateral cephalometric radiographs of 2 Chinese adults (1 man, 1 woman) with normal profiles, Class I incisor relationships, and Class I skeletal patterns were digitized. The digital images were modified by altering cephalometric skeletal and dental hard tissue Chinese normative values in increments of 2 standard deviations in the anteroposterior plane to obtain 7 facial profiles for each sex. The images were bimaxillary protrusion, protrusive mandible, retrusive mandible, normal profile (Class I incisor with Class I skeletal pattern), retrusive maxilla, protrusive maxilla, and bimaxillary retrusion. The Mann-Whitney U test was used to determine professional differences in assessment. Multiple regression analysis was performed with age, professional status, sex, and number of years in practice as independent variables. A strong correlation was found in the profile assessment between orthodontists and oral surgeons. Normal and bimaxillary retrusive Chinese male and female profiles were judged to be highly attractive by orthodontists and oral surgeons. Chinese male and female profiles with protrusive mandibles were judged the least attractive. There was a difference in professional opinion about the most attractive male profile (P < .05), with orthodontists preferring a flatter profile and oral surgeons preferring a fuller normal Chinese profile. Sex of dental professionals and number of years in clinical practice were found to affect profile rankings.
Profiler - A Fast and Versatile New Program for Decomposing Galaxy Light Profiles
NASA Astrophysics Data System (ADS)
Ciambur, Bogdan C.
2016-12-01
I introduce Profiler, a user-friendly program designed to analyse the radial surface brightness profiles of galaxies. With an intuitive graphical user interface, Profiler can accurately model galaxies of a broad range of morphological types, with various parametric functions routinely employed in the field (Sérsic, core-Sérsic, exponential, Gaussian, Moffat, and Ferrers). In addition to these, Profiler can employ the broken exponential model for disc truncations or anti-truncations, and two special cases of the edge-on disc model: along the disc's major or minor axis. The convolution of (circular or elliptical) models with the point spread function is performed in 2D, and offers a choice between Gaussian, Moffat or a user-provided profile for the point spread function. Profiler is optimised to work with galaxy light profiles obtained from isophotal measurements, which allow for radial gradients in the geometric parameters of the isophotes, and are thus often better at capturing the total light than 2D image-fitting programs. Additionally, the 1D approach is generally less computationally expensive and more stable. I demonstrate Profiler's features by decomposing three case-study galaxies: the cored elliptical galaxy NGC 3348, the nucleated dwarf Seyfert I galaxy Pox 52, and NGC 2549, a double-barred galaxy with an edge-on, truncated disc.
Comparison of MAX-DOAS profiling algorithms during CINDI-2 - Part 2: trace gases
NASA Astrophysics Data System (ADS)
Hendrick, Francois; Friess, Udo; Tirpitz, Lukas; Apituley, Arnoud; Van Roozendael, Michel; Kreher, Karin; Richter, Andreas; Wagner, Thomas
2017-04-01
The second Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI-2) took place at the Cabauw Experimental Site for Atmospheric Research (CESAR; Utrecht area, The Netherlands) from 25 August until 7 October 2016. CINDI-2 was aiming at assessing the consistency of MAX-DOAS slant column density measurements of tropospheric species (NO2, HCHO, O3, and O4) relevant for the validation of future ESA atmospheric Sentinel missions, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world. An important objective of the campaign was to study the relationship between remote-sensing column and profile measurements of the above species and collocated reference ancillary observations. For this purpose, the CINDI-2 Profiling Task Team (CPTT) was created, involving 22 groups performing aerosol and trace gas vertical profile inversion using dedicated MAX-DOAS profiling algorithms, as well as the teams responsible for ancillary profile and surface concentration measurements (NO2 analysers, NO2 sondes, NO2 and Raman LIDARs, CAPS, Long-Path DOAS, sunphotometer, nephelometer, etc). The main purpose of the CPTT is to assess the consistency of the different profiling tools for retrieving aerosol extinction and trace gas vertical profiles through comparison exercises using commonly defined settings and to validate the retrievals with correlative observations. In this presentation, we give an overview of the MAX-DOAS vertical profile comparison results, focusing on NO2 and HCHO, the aerosol retrievals being presented in a companion abstract led by U. Frieß. The performance of the different algorithms is investigated with respect to the various sky and weather conditions and aerosol loadings encountered during the campaign. The consistency between optimal-estimation-based and parameterized profiling tools is also evaluated for these different conditions, together with the level of agreement with available NO2 and HCHO ancillary observations. This comparison study will be put in the perspective of the development of a centralized MAX-DOAS processing system within the framework of the ESA Fiducial Reference Measurements (FRM) project.
The New Microwave Temperature and Humidity Profiler (MTHP) Airborne Instrument
NASA Astrophysics Data System (ADS)
Lim, B.; Bendig, R.; Denning, R.; Pandian, P.; Read, W. G.; Tanner, A.
2016-12-01
The Jet Propulsion Laboratory (JPL) has developed a next generation sensor, the Microwave Temperature and Humidity Profiler (MTHP) for use on airborne platforms. The instrument measures the 60 GHz oxygen band and 183 GHz water vapor band, and scans ahead of the aircraft flight path, allowing for atmospheric retrievals above and below the aircraft, to generate vertical profiles. The millimeter wave microwave receivers utilize low noise amplifiers made on the 35 nm indium phosphide (InP) High Electron Mobility Transistors (HEMTs) process that offer low noise figures ( 4 dB). Continuous calibration is performed with a novel rotating drum, through an aperture matched to the measurement frequencies, with two external targets - one at ambient and another heated to 55oC. The instrument performs a scan of the vertical structure of the atmosphere and calibration targets every 1.5 seconds The instrument has recently flown on the Gulfstream 2 in June 2016 and participated in the NCAR ARISTO C-130 flight test campaign in August 2016. The performance of the instrument during these campaigns, will be presented.
Effect of plasma distribution on propulsion performance in electrodeless plasma thrusters
NASA Astrophysics Data System (ADS)
Takao, Yoshinori; Takase, Kazuki; Takahashi, Kazunori
2016-09-01
A helicon plasma thruster consisting of a helicon plasma source and a magnetic nozzle is one of the candidates for long-lifetime thrusters because no electrodes are employed to generate or accelerate plasma. A recent experiment, however, detected the non-negligible axial momentum lost to the lateral wall boundary, which degrades thruster performance, when the source was operated with highly ionized gases. To investigate this mechanism, we have conducted two-dimensional axisymmetric particle-in-cell (PIC) simulations with the neutral distribution obtained by Direct Simulation Monte Carlo (DSMC) method. The numerical results have indicated that the axially asymmetric profiles of the plasma density and potential are obtained when the strong decay of neutrals occurs at the source downstream. This asymmetric potential profile leads to the accelerated ion towards the lateral wall, leading to the non-negligible net axial force in the opposite direction of the thrust. Hence, to reduce this asymmetric profile by increasing the neutral density at downstream and/or by confining plasma with external magnetic field would result in improvement of the propulsion performance. These effects are also analyzed by PIC/DSMC simulations.
Mischak, Harald; Vlahou, Antonia; Ioannidis, John P A
2013-04-01
Mass spectrometry platforms have attracted a lot of interest in the last 2 decades as profiling tools for native peptides and proteins with clinical potential. However, limitations associated with reproducibility and analytical robustness, especially pronounced with the initial SELDI systems, hindered the application of such platforms in biomarker qualification and clinical implementation. The scope of this article is to give a short overview on data available on performance and on analytical robustness of the different platforms for peptide profiling. Using the CE-MS platform as a paradigm, data on analytical performance are described including reproducibility (short-term and intermediate repeatability), stability, interference, quantification capabilities (limits of detection), and inter-laboratory variability. We discuss these issues by using as an example our experience with the development of a 273-peptide marker for chronic kidney disease. Finally, we discuss pros and cons and means for improvement and emphasize the need to test in terms of comparative clinical performance and impact, different platforms that pass reasonably well analytical validation tests. Copyright © 2012 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.
Ogden, Samantha J; Horton, Jeffrey K; Stubbs, Simon L; Tatnell, Peter J
2015-01-01
The 1.2 mm Electric Coring Tool (e-Core™) was developed to increase the throughput of FTA(™) sample collection cards used during forensic workflows and is similar to a 1.2 mm Harris manual micro-punch for sampling dried blood spots. Direct short tandem repeat (STR) DNA profiling was used to compare samples taken by the e-Core tool with those taken by the manual micro-punch. The performance of the e-Core device was evaluated using a commercially available PowerPlex™ 18D STR System. In addition, an analysis was performed that investigated the potential carryover of DNA via the e-Core punch from one FTA disc to another. This contamination study was carried out using Applied Biosystems AmpflSTR™ Identifiler™ Direct PCR Amplification kits. The e-Core instrument does not contaminate FTA discs when a cleaning punch is used following excision of discs containing samples and generates STR profiles that are comparable to those generated by the manual micro-punch. © 2014 American Academy of Forensic Sciences.
Effect of the collector tube profile on Pitot pump performances
NASA Astrophysics Data System (ADS)
Komaki, K.; Kanemoto, T.; Sagara, K.; Umekage, T.
2013-12-01
The pitot pump is composed of the rotating casing with the impeller channel and the pitot tube type collector as the discharge line. The radial impeller feeds water to the rotating casing. The water rotating together with the casing is caught by the stationary pitot tube type collector, and then discharges to the outside. This type pump, as the extra high head pump, is provided mainly for boiler feed systems, and has been designed by trial and error. To optimize the pump profiles, it is desirable to investigate not only performances but also internal flow conditions. This paper discusses experimentally and numerically the relation between the pump performances and the flow conditions in the rotating casing. The moderately larger dimensions of the collector make the pump head and the discharge high with the higher hydraulic efficiency. The flow in the casing is almost the forced vortex type whose velocity is in proportion to the radius but the core velocity is affected with the drag force of the stationary collector. Based upon the above results, the profile of the pitot tube type collector was optimized with the numerical simulation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Troy G. Garn; Dave H. Meikrantz; Mitchell R. Greenhalgh
2008-09-01
An annular centrifugal contactor pilot plant incorporating 30 stages of commercial 5 cm CINC V-02 units has been built and operated at INL during the past year. The pilot plant includes an automated process control and data acquisitioning system. The primary purpose of the pilot plant is to evaluate the performance of a large number of inter-connected centrifugal contactors and obtain temperature profile measurements within a 30-stage cascade. Additional solvent extraction flowsheet testing using stable surrogates is also being considered. Preliminary hydraulic testing was conducted with all 30 contactors interconnected for continuous counter-current flow. Hydraulic performance and system operational testsmore » were conducted successfully but with higher single-stage rotor speeds found necessary to maintain steady interstage flow at flowrates of 1 L/min and higher. Initial temperature profile measurements were also completed in this configuration studying the performance during single aqueous and two-phase counter-current flow at ambient and elevated inlet solution temperatures. Temperature profile testing of two discreet sections of the cascade required additional feed and discharge connections. Lamp oil, a commercially available alkane mixture of C14 to C18 chains, and tap water adjusted to pH 2 were the solution feeds for all the testing described in this report. Numerous temperature profiles were completed using a newly constructed 30-stage centrifugal contactor pilot plant. The automated process control and data acquisition system worked very well throughout testing. Temperature data profiles for an array of total flowrates (FT) and contactor rpm values for both single-phase and two-phase systems have been collected with selected profiles and comparisons reported. Total flowrates (FT) ranged from 0.5-1.4 L/min with rotor speeds from 3500-4000 rpm. Solution inlet temperatures ranging from ambient up to 50° C were tested. Ambient temperature testing shows that a small amount of heat is added to the processed solution by the mechanical energy of the contactors. The temperature profiles match the ambient temperature of the laboratory but are nearly 10° C higher toward the middle of the cascade. Heated input solution testing provides temperature profiles with smaller temperature gradients and are more influenced by the temperature of the inlet solutions than the ambient laboratory temperature. The temperature effects of solution mixing, even at 4000 rpm, were insignificant in any of the studies conducted on lamp oil and water.« less
Effects of CNT size on the desalination performance of an outer-wall CNT slit membrane.
Ang, Elisa Y M; Ng, Teng Yong; Yeo, Jingjie; Lin, Rongming; Liu, Zishun; Geethalakshmi, K R
2018-05-23
We investigate the effect of varying carbon nanotube (CNT) size on the desalination performance through slit confinements formed by horizontally aligned CNTs stacked on top of one another. By increasing the CNT size, the results obtained from this study indicate a corresponding increase in the water flow rate, accompanied by a slight reduction in salt rejection performance. However, due to the increase in the membrane area with CNT size, the permeability performance is observed to reduce as the CNT size increases. Nevertheless, a comparison with nanoporous 2D membranes shows that the permeability of an outer-wall CNT slit membrane remains significantly higher for all CNT sizes considered. This indicates that precise dimensions of the CNTs are not highly crucial for achieving ultra-high permeability performance in such membranes, as long as the critical slit size is maintained. In-depth analytical studies were further conducted to correlate the influence of curvature effects due to increasing CNT size on the flow characteristcis of the outer-wall CNT membrane. These include the analysis of the measured velocity profiles, oxygen density mapping, potential of mean force profile and friction profile. The present numerical results demonstrate the superb desalination performance of the outer-wall CNT slit membrane, regardless of the size of CNTs used. In addition, an extensive analysis conducted provides detailed characterization of how the curvature affects flow across outer-wall CNTs, and can be used to guide future design and fabrication for experimental testing.
Kempton, Thomas; Sirotic, Anita C; Coutts, Aaron J
2017-04-01
To examine differences in physical and technical performance profiles using a large sample of match observations drawn from successful and less-successful professional rugby league teams. Match activity profiles were collected using global positioning satellite (GPS) technology from 29 players from a successful rugby league team during 24 games and 25 players from a less-successful team during 18 games throughout 2 separate competition seasons. Technical performance data were obtained from a commercial statistics provider. A progressive magnitude-based statistical approach was used to compare differences in physical and technical performance variables between the reference teams. There were no clear differences in playing time, absolute and relative total distances, or low-speed running distances between successful and less-successful teams. The successful team possibly to very likely had lower higher-speed running demands and likely had fewer physical collisions than the less-successful team, although they likely to most likely demonstrated more accelerations and decelerations and likely had higher average metabolic power. The successful team very likely gained more territory in attack, very likely had more possessions, and likely committed fewer errors. In contrast, the less-successful team was likely required to attempt more tackles, most likely missed more tackles, and very likely had a lower effective tackle percentage. In the current study, successful match performance was not contingent on higher match running outputs or more physical collisions; rather, proficiency in technical performance components better differentiated successful and less-successful teams.
OMPS Limb Profiler Instrument Performance Assessment
NASA Technical Reports Server (NTRS)
Jaross, Glen R.; Bhartia, Pawan K.; Chen, Grace; Kowitt, Mark; Haken, Michael; Chen, Zhong; Xu, Philippe; Warner, Jeremy; Kelly, Thomas
2014-01-01
Following the successful launch of the Ozone Mapping and Profiler Suite (OMPS) aboard the Suomi National Polar-orbiting Partnership (SNPP) spacecraft, the NASA OMPS Limb team began an evaluation of instrument and data product performance. The focus of this paper is the instrument performance in relation to the original design criteria. Performance that is closer to expectations increases the likelihood that limb scatter measurements by SNPP OMPS and successor instruments can form the basis for accurate long-term monitoring of ozone vertical profiles. The team finds that the Limb instrument operates mostly as designed and basic performance meets or exceeds the original design criteria. Internally scattered stray light and sensor pointing knowledge are two design challenges with the potential to seriously degrade performance. A thorough prelaunch characterization of stray light supports software corrections that are accurate to within 1% in radiances up to 60 km for the wavelengths used in deriving ozone. Residual stray light errors at 1000nm, which is useful in retrievals of stratospheric aerosols, currently exceed 10%. Height registration errors in the range of 1 km to 2 km have been observed that cannot be fully explained by known error sources. An unexpected thermal sensitivity of the sensor also causes wavelengths and pointing to shift each orbit in the northern hemisphere. Spectral shifts of as much as 0.5nm in the ultraviolet and 5 nm in the visible, and up to 0.3 km shifts in registered height, must be corrected in ground processing.
Effect of motivational climate profiles on motivational indices in team sport.
Ommundsen, Y; Roberts, G C
1999-12-01
Contemporary perspectives of achievement motivation have been based on social cognitive theories which give motivational climate a central place in the regulation of subsequent affective states, cognitions and behaviour in achievement contexts. This study examined the relationship between different profiles of the motivational climate in teamsport and achievement, and socially related cognitions among Norwegian team sport athletes. Players (N= 148) assessed their perception of the motivational climate using the Norwegian version of the Motivational climate in sport questionnaire, sources of satisfaction in team sport, achievement strategies, perceived purposes of sport, and conceptions of ability. Multivariate analysis of variance (2x2) showed both main effects for profiles of the motivational climate and an interaction effect. Athletes perceiving the climate as high in mastery and high in performance oriented criteria reported psychological responses that were more adaptative than those perceiving the climate as low in mastery and high in performance criteria. With one exception, the findings showed that those high in mastery and low in performance were more likely to emphasise self-referenced criteria when judging perceived ability in team sport. For both social responsibility and lifetime skills as purposes in sport, it was the high performance and low mastery athletes who were least likely to endorse these purposes. And importantly, the high mastery climate seemed to moderate the impact of being in a high performance climate. The pattern of findings suggests that perceiving the motivational climate as performance oriented may not be motivationally maladaptive when accompanied by mastery oriented situational cues.
Electric/Hybrid Vehicle Simulation
NASA Technical Reports Server (NTRS)
Slusser, R. A.; Chapman, C. P.; Brennand, J. P.
1985-01-01
ELVEC computer program provides vehicle designer with simulation tool for detailed studies of electric and hybrid vehicle performance and cost. ELVEC simulates performance of user-specified electric or hybrid vehicle under user specified driving schedule profile or operating schedule. ELVEC performs vehicle design and life cycle cost analysis.
Development of a valid simulation assessment for a military dismounted assault task.
Silk, Aaron J; Billing, Daniel C
2013-03-01
The Australian Defence Force is currently developing physical standards commensurate with job demands. Vital to this development process has been the accurate profiling of common military tasks. One such task required of all dismounted combat soldiers, an offensive assault on an enemy force, was the subject of in-depth profiling. In addition to overall assault performance, potential differences among patrol roles (scout, gunner, and flank) were investigated. Three different mock assaults of 100 to 150 m were performed by three patrols comprising qualified experienced infantry soldiers. Each soldier was fitted with a heart rate monitor and wore a global positioning device. Average assault duration was 6.5 minutes and required nineteen 7-m bounds performed on a 22-seconds duty cycle at 75% heart rate reserve and a work to rest ratio 1:4. Assaults conducted in more densely vegetated terrain resulted in significantly reduced (p < 0.05) bound distance, bound duration, and movement velocity. Results indicated significant performance differences (p < 0.05) among patrol roles for external load carried, heart rate response, bound duration, and distance covered while movement velocity was not different (p > 0.05). As a result of profiling the assault task, a valid simulation capable of assessing soldiers' physical capacity to perform this task was developed. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.
Characteristics of dilute gas-solids suspensions in drag reducing flow
NASA Technical Reports Server (NTRS)
Kane, R. S.; Pfeffer, R.
1973-01-01
Measurements were performed on dilute flowing gas-solids suspensions and included data, with particles present, on gas friction factors, velocity profiles, turbulence intensity profiles, turbulent spectra, and particle velocity profiles. Glass beads of 10 to 60 micron diameter were suspended in air at Reynolds numbers of 10,000 to 25,000 and solids loading ratios from 0 to 4. Drag reduction was achieved for all particle sizes in vertical flow and for the smaller particle sizes in horizontal flow. The profile measurements in the vertical tube indicated that the presence of particles thickened the viscous sublayer. A quantitative theory based on particle-eddy interaction and viscous sublayer thickening has been proposed.
Development and validation of a Client Problem Profile and Index for drug treatment.
Joe, George W; Simpson, D Dwayne; Greener, Jack M; Rowan-Szal, Grace A
2004-08-01
The development of the Client Problem Profile and Index are described, and initial concurrent and predictive validity data are presented for a sample of 547 patients in outpatient methadone treatment. Derived from the TCU Brief Intake for drug treatment admissions, the profile covers 14 problem areas related to drug use (particularly cocaine, heroin/opiate, marijuana, other illegal drugs, and multiple drug use), HIV risks, psychosocial-functioning, health, employment, and criminality. Analyses of predictive validity show the profile and its index (number of problem areas) were significantly related to therapeutic engagement, during-treatment performance, and posttreatment follow-up outcomes. Low moderate to high moderate effect sizes were observed in analyses of the index's discrimination.
Source-to-incident-flux relation in a Tokamak blanket module
NASA Astrophysics Data System (ADS)
Imel, G. R.
The next-generation Tokamak experiments, including the Tokamak fusion test reactor (TFTR), will utilize small blanket modules to measure performance parameters such as tritium breeding profiles, power deposition profiles, and neutron flux profiles. Specifically, a neutron calorimeter (simply a neutron moderating blanket module) which permits inferring the incident 14 MeV flux based on measured temperature profiles was proposed for TFTR. The problem of how to relate this total scalar flux to the fusion neutron source is addressed. This relation is necessary since the calorimeter is proposed as a total fusion energy monitor. The methods and assumptions presented was valid for the TFTR Lithium Breeding Module (LBM), as well as other modules on larger Tokamak reactors.
The Performance of Fundamental Gross Motor Skills by Children Enrolled in Head Start.
ERIC Educational Resources Information Center
Woodard, Rebecca J.; Yun, Joonkoo
2001-01-01
This study sought to descriptively evaluate the performance of fundamental gross motor skills among Head Start children. Levels of performance were compared and contrasted with performance profiles of the Test of Gross Motor Development. Findings suggest that Head Start curriculum should focus on the importance of developing fundamental gross…
Screening for prenatal substance use: development of the Substance Use Risk Profile-Pregnancy scale.
Yonkers, Kimberly A; Gotman, Nathan; Kershaw, Trace; Forray, Ariadna; Howell, Heather B; Rounsaville, Bruce J
2010-10-01
To report on the development of a questionnaire to screen for hazardous substance use in pregnant women and to compare the performance of the questionnaire with other drug and alcohol measures. Pregnant women were administered a modified TWEAK (Tolerance, Worried, Eye-openers, Amnesia, K[C] Cut Down) questionnaire, the 4Ps Plus questionnaire, items from the Addiction Severity Index, and two questions about domestic violence (N=2,684). The sample was divided into "training" (n=1,610) and "validation" (n=1,074) subsamples. We applied recursive partitioning class analysis to the responses from individuals in the training subsample that resulted in a three-item Substance Use Risk Profile-Pregnancy scale. We examined sensitivity, specificity, and the fit of logistic regression models in the validation subsample to compare the performance of the Substance Use Risk Profile-Pregnancy scale with the modified TWEAK and various scoring algorithms of the 4Ps. The Substance Use Risk Profile-Pregnancy scale is comprised of three informative questions that can be scored for high- or low-risk populations. The Substance Use Risk Profile-Pregnancy scale algorithm for low-risk populations was mostly highly predictive of substance use in the validation subsample (Akaike's Information Criterion=579.75, Nagelkerke R=0.27) with high sensitivity (91%) and adequate specificity (67%). The high-risk algorithm had lower sensitivity (57%) but higher specificity (88%). The Substance Use Risk Profile-Pregnancy scale is simple and flexible with good sensitivity and specificity. The Substance Use Risk Profile-Pregnancy scale can potentially detect a range of substances that may be abused. Clinicians need to further assess women with a positive screen to identify those who require treatment for alcohol or illicit substance use in pregnancy. III.
Planas, Maria-Elena; García, Patricia J.; Bustelo, Monserrat; Carcamo, Cesar P.; Martinez, Sebastian; Nopo, Hugo; Rodriguez, Julio; Merino, Maria-Fernanda; Morrison, Andrew
2015-01-01
Most studies reporting ethnic disparities in the quality of healthcare come from developed countries and rely on observational methods. We conducted the first experimental study to evaluate whether health providers in Peru provide differential quality of care for family planning services, based on the indigenous or mestizo (mixed ethnoracial ancestry) profile of the patient. In a crossover randomized controlled trial conducted in 2012, a sample of 351 out of the 408 public health establishments in Metropolitan Lima, Peru were randomly assigned to receive unannounced simulated patients enacting indigenous and mestizo profiles (sequence-1) or mestizo and then indigenous profiles (sequence-2), with a five week wash-out period. Both ethnic profiles used the same scripted scenario for seeking contraceptive advice but had distinctive cultural attributes such as clothing, styling of hair, make-up, accessories, posture and patterns of movement and speech. Our primary outcome measure of quality of care is the proportion of technical tasks performed by providers, as established by Peruvian family planning clinical guidelines. Providers and data analysts were kept blinded to the allocation. We found a non-significant mean difference of -0·7% (p = 0·23) between ethnic profiles in the percentage of technical tasks performed by providers. However we report large deficiencies in the compliance with quality standards of care for both profiles. Differential provider behaviour based on the patient's ethnic profiles compared in the study did not contribute to deficiencies in family planning outcomes observed. The study highlights the need to explore other determinants for poor compliance with quality standards, including demand and supply side factors, and calls for interventions to improve the quality of care for family planning services in Metropolitan Lima. PMID:25671664
Seo, Ja Young; Park, Hyung-Doo; Kim, Jong Won; Oh, Hyeon Ju; Yang, Jeong Soo; Chang, Yun Sil; Park, Won Soon; Lee, Soo-Youn
2014-01-01
Newborn screening for congenital adrenal hyperplasia (CAH) based on measuring 17-hydroxyprogesterone (17-OHP) by immunoassay generates a number of false-positive results, especially in preterm neonates. We applied steroid profiling by using liquid chromatography-tandem mass spectrometry (LC-MS/MS) as a second-tier test in newborns with positive CAH screening and evaluated its clinical utility in a tertiary care hospital setting. By performing a 4-year retrospective data review, we were able to test 121 dried blood spots from newborns with positive CAH screening for 17-OHP, androstenedione and cortisol levels by LC-MS/MS. We prospectively evaluated the clinical utility of steroid profiling after the implementation of steroid profiling as a second-tier test in our routine clinical practice. During the 2-year prospective study period, 104 cases with positive initial screening by FIA were tested by LC-MS/MS. Clinical and laboratory follow-up were performed for at least 6 months. The preterm neonates accounted for 50.7% (76/150) and 70.4% (88/125) of screening-positive cases in retrospective and prospective cohorts, respectively. By applying steroid profiling as a second-tier test for positive CAH screening, we eliminated all false-positive results and decreased the median follow-up time from 75 to 8 days. Our data showed that steroid profiling reduced the burden of follow-up exams by improving the positive predictive value of the CAH screening program. The use of steroid profiling as a second-tier test for positive CAH screening will improve clinical practice particularly in a tertiary care hospital setting where positive CAH screening from preterm neonates is frequently encountered.
Planas, Maria-Elena; García, Patricia J; Bustelo, Monserrat; Carcamo, Cesar P; Martinez, Sebastian; Nopo, Hugo; Rodriguez, Julio; Merino, Maria-Fernanda; Morrison, Andrew
2015-01-01
Most studies reporting ethnic disparities in the quality of healthcare come from developed countries and rely on observational methods. We conducted the first experimental study to evaluate whether health providers in Peru provide differential quality of care for family planning services, based on the indigenous or mestizo (mixed ethnoracial ancestry) profile of the patient. In a crossover randomized controlled trial conducted in 2012, a sample of 351 out of the 408 public health establishments in Metropolitan Lima, Peru were randomly assigned to receive unannounced simulated patients enacting indigenous and mestizo profiles (sequence-1) or mestizo and then indigenous profiles (sequence-2), with a five week wash-out period. Both ethnic profiles used the same scripted scenario for seeking contraceptive advice but had distinctive cultural attributes such as clothing, styling of hair, make-up, accessories, posture and patterns of movement and speech. Our primary outcome measure of quality of care is the proportion of technical tasks performed by providers, as established by Peruvian family planning clinical guidelines. Providers and data analysts were kept blinded to the allocation. We found a non-significant mean difference of -0.7% (p = 0.23) between ethnic profiles in the percentage of technical tasks performed by providers. However we report large deficiencies in the compliance with quality standards of care for both profiles. Differential provider behaviour based on the patient's ethnic profiles compared in the study did not contribute to deficiencies in family planning outcomes observed. The study highlights the need to explore other determinants for poor compliance with quality standards, including demand and supply side factors, and calls for interventions to improve the quality of care for family planning services in Metropolitan Lima.
Predictive genomics DNA profiling for athletic performance.
Kambouris, Marios; Ntalouka, Foteini; Ziogas, Georgios; Maffulli, Nicola
2012-12-01
Genes control biological processes such as muscle, cartilage and bone formation, muscle energy production and metabolism (mitochondriogenesis, lactic acid removal), blood and tissue oxygenation (erythropoiesis, angiogenesis, vasodilatation), all essential in sport and athletic performance. DNA sequence variations in such genes confer genetic advantages that can be exploited, or genetic 'barriers' that could be overcome to achieve optimal athletic performance. Predictive Genomic DNA Profiling for athletic performance reveals genetic variations that may be associated with better suitability for endurance, strength and speed sports, vulnerability to sports-related injuries and individualized nutritional requirements. Knowledge of genetic 'suitability' in respect to endurance capacity or strength and speed would lead to appropriate sport and athletic activity selection. Knowledge of genetic advantages and barriers would 'direct' an individualized training program, nutritional plan and nutritional supplementation to achieving optimal performance, overcoming 'barriers' that results from intense exercise and pressure under competition with minimum waste of time and energy and avoidance of health risks (hypertension, cardiovascular disease, inflammation, and musculoskeletal injuries) related to exercise, training and competition. Predictive Genomics DNA profiling for Athletics and Sports performance is developing into a tool for athletic activity and sport selection and for the formulation of individualized and personalized training and nutritional programs to optimize health and performance for the athlete. Human DNA sequences are patentable in some countries, while in others DNA testing methodologies [unless proprietary], are non patentable. On the other hand, gene and variant selection, genotype interpretation and the risk and suitability assigning algorithms based on the specific Genomic variants used are amenable to patent protection.
Conceptual Trade Study of General Purpose Heat Source Powered Stirling Converter Configurations
NASA Technical Reports Server (NTRS)
Turpin, J. B.
2007-01-01
This Technical Manual describes a parametric study of general purpose heat source (GPHS) powered Stirling converter configurations. This study was performed in support of MSFC s efforts to establish the capability to perform non-nuclear system level testing and integration of radioisotope power systems. Six different GPHS stack configurations at a total of three different power levels (80, 250, and 500 W(sub e) were analyzed. The thermal profiles of the integrated GPHS modules (for each configuration) were calculated to determine maximum temperatures for comparison to allowable material limits. Temperature profiles for off-nominal power conditions were also assessed in order to better understand how power demands from the Stirling engine impact the performance of a given configuration.
NASA Technical Reports Server (NTRS)
Orasanu, Judith
1991-01-01
Aircrew effectiveness in coping with emergencies has been linked to captain's personality profile. The present study analyzed cockpit communication during simulated flight to examine the relation between captains' discourse strategies, personality profiles, and crew performance. Positive Instrumental/Expressive captains and Instrumental-Negative captains used very similar communication strategies and their crews made few errors. Their talk was distinguished by high levels of planning and strategizing, gathering information, predicting/alerting, and explaining, especially during the emergency flight phase. Negative-Expressive captains talked less overall, and engaged in little problem solving talk, even during emergencies. Their crews made many errors. Findings support the theory that high crew performance results when captains use language to build shared mental models for problem situations.
Accelerating Information Retrieval from Profile Hidden Markov Model Databases.
Tamimi, Ahmad; Ashhab, Yaqoub; Tamimi, Hashem
2016-01-01
Profile Hidden Markov Model (Profile-HMM) is an efficient statistical approach to represent protein families. Currently, several databases maintain valuable protein sequence information as profile-HMMs. There is an increasing interest to improve the efficiency of searching Profile-HMM databases to detect sequence-profile or profile-profile homology. However, most efforts to enhance searching efficiency have been focusing on improving the alignment algorithms. Although the performance of these algorithms is fairly acceptable, the growing size of these databases, as well as the increasing demand for using batch query searching approach, are strong motivations that call for further enhancement of information retrieval from profile-HMM databases. This work presents a heuristic method to accelerate the current profile-HMM homology searching approaches. The method works by cluster-based remodeling of the database to reduce the search space, rather than focusing on the alignment algorithms. Using different clustering techniques, 4284 TIGRFAMs profiles were clustered based on their similarities. A representative for each cluster was assigned. To enhance sensitivity, we proposed an extended step that allows overlapping among clusters. A validation benchmark of 6000 randomly selected protein sequences was used to query the clustered profiles. To evaluate the efficiency of our approach, speed and recall values were measured and compared with the sequential search approach. Using hierarchical, k-means, and connected component clustering techniques followed by the extended overlapping step, we obtained an average reduction in time of 41%, and an average recall of 96%. Our results demonstrate that representation of profile-HMMs using a clustering-based approach can significantly accelerate data retrieval from profile-HMM databases.
Are all risks equal? Early experiences of poverty-related risk and children's functioning.
Roy, Amanda L; Raver, C Cybele
2014-06-01
Using cumulative risk and latent class analysis (LCA) models, we examined how exposure to deep poverty (income-to-needs ratio <0.50) and 4 poverty-related risks (i.e., single-parent household, residential crowding, caregiver depression, and multiple life stressors) in preschool is related to children's future difficulty in school in a longitudinal sample of 602 Head Start-enrolled, low-income families. Results from the LCA revealed 4 risk profiles: low risk, deep poverty and single, single and stressed, and deep poverty and crowded household. Tests of measurement invariance across racial/ethnic groups established that, although patterns of risk are similar across groups (i.e., risks covary in the same way), the prevalence of risk profiles differs. African American families were overrepresented in the "deep poverty and single" profile while Latino and White families were overrepresented in the "deep poverty and crowded" profile. Finally, children's third grade functioning in 3 domains (i.e., academic performance, behavior problems, and self-regulatory skills) was predicted using a cumulative risk index and LCA-identified risk profiles. Both approaches demonstrated that children who experienced higher levels of risk in preschool had worse school performance than children with low levels of risk. However, LCA also revealed that children who experienced "single and stressed" family settings had more behavior problems than low-risk children while children who experienced "deep poverty and crowded" family settings had worse academic performance. The results indicate that all risks are not equal for children's development and highlight the utility of LCA for tailoring intervention efforts to best meet the needs of target populations. PsycINFO Database Record (c) 2014 APA, all rights reserved
Are All Risks Equal? Early Experiences of Poverty-Related Risk and Children’s Functioning
Roy, Amanda L.; Raver, C. Cybele
2014-01-01
Using cumulative risk and latent class analysis (LCA) models, this research examines how exposure to deep poverty (income-to-needs ratio <.50) and four poverty-related risks (single-parent household, residential crowding, caregiver depression, and multiple life stressors) in preschool is related to children’s future difficulty in school in a longitudinal sample of 602 Head-Start enrolled, low-income families. Results from the LCA revealed four risk profiles: low risk, deep poverty and single, single and stressed, and deep poverty and crowded household. Tests of measurement invariance across racial/ethnic groups established that although patterns of risk are similar across groups (i.e. risks co-vary in the same way), the prevalence of risk profiles differ. African American families were over-represented in the ‘deep poverty and single’ profile while Latino and White families were over-represented in the ‘deep poverty and crowded’ profile. Finally, children’s third grade functioning in three domains (academic performance, behavior problems, self-regulatory skills) was predicted using a cumulative risk index and LCA identified risk profiles. Both approaches demonstrated that children who experienced higher levels of risk in preschool had worse school performance than children with low levels of risk. However, the LCA also revealed that children who experienced ‘single and stressed’ family settings had more behavior problems than low risk children while children who experienced ‘deep poverty and crowded’ family settings had worse academic performance. The results indicate that all risks are not equal for children’s development and highlight the utility of LCA for tailoring intervention efforts to best meet the needs of target populations. PMID:24749652
Nuclear electric propulsion mission performance for fast piloted Mars missions
NASA Technical Reports Server (NTRS)
Hack, K. J.; George, J. A.; Dudzinski, L. A.
1991-01-01
A mission study aimed at minimizing the time humans would spend in the space environment is presented. The use of nuclear electric propulsion (NEP), when combined with a suitable mission profile, can reduce the trip time to durations competitive with other propulsion systems. Specifically, a split mission profile utilizing an earth crew capture vehicle accounts for a significant portion of the trip time reduction compared to previous studies. NEP is shown to be capable of performing fast piloted missions to Mars at low power levels using near-term technology and is considered to be a viable candidate for these missions.
Nanometer-Scale Electrical Potential Profiling Across Perovskite Solar Cells
DOE Office of Scientific and Technical Information (OSTI.GOV)
Xiao, Chuanxiao; Jiang, Chun-Sheng; Ke, Weijun
2016-11-21
We used Kelvin probe force microscopy to study the potential distribution on cross-section of perovskite solar cells with different types of electron-transporting layers (ETLs). Our results explain the low open-circuit voltage and fill factor in ETL-free cells, and support the fact that intrinsic SnO2 as an alternative ETL material can make high-performance devices. Furthermore, the potential-profiling results indicate a reduction in junction-interface recombination by the optimized SnO2 layer and adding a fullerene layer, which is consistent with the improved device performance and current-voltage hysteresis.
Shock compression response of cold-rolled Ni/Al multilayer composites
NASA Astrophysics Data System (ADS)
Specht, Paul E.; Weihs, Timothy P.; Thadhani, Naresh N.
2017-01-01
Uniaxial strain, plate-on-plate impact experiments were performed on cold-rolled Ni/Al multilayer composites and the resulting Hugoniot was determined through time-resolved measurements combined with impedance matching. The experimental Hugoniot agreed with that previously predicted by two dimensional (2D) meso-scale calculations [Specht et al., J. Appl. Phys. 111, 073527 (2012)]. Additional 2D meso-scale simulations were performed using the same computational method as the prior study to reproduce the experimentally measured free surface velocities and stress profiles. These simulations accurately replicated the experimental profiles, providing additional validation for the previous computational work.
DOE Office of Scientific and Technical Information (OSTI.GOV)
McLoughlin, K.
2016-01-22
The software application “MetaQuant” was developed by our group at Lawrence Livermore National Laboratory (LLNL). It is designed to profile microbial populations in a sample using data from whole-genome shotgun (WGS) metagenomic DNA sequencing. Several other metagenomic profiling applications have been described in the literature. We ran a series of benchmark tests to compare the performance of MetaQuant against that of a few existing profiling tools, using real and simulated sequence datasets. This report describes our benchmarking procedure and results.
NASA Astrophysics Data System (ADS)
Morozov, A.; Krücken, R.; Ulrich, A.; Wieser, J.
2006-11-01
Side-view intensity profiles of fluorescent light were measured for neon and nitrogen excited with 12keV electron beams at gas pressures from 250to1400hPa. The intensity profiles were compared with theoretical profiles calculated using the CASINO program which performs Monte Carlo simulations of electron scattering. It was assumed that the spatial distribution of fluorescent intensity is directly proportional to the spatial distribution of energy loss by primary electrons. The comparison shows good correlation of experimental data and the results of numeric simulations.
NASA Astrophysics Data System (ADS)
Siomos, N.; Filioglou, M.; Poupkou, A.; Liora, N.; Dimopoulos, S.; Melas, D.; Chaikovsky, A.; Balis, D. S.
2016-06-01
Vertical profiles of the aerosol mass concentration derived by the Lidar/Radiometer Inversion Code (LIRIC), that uses combined sunphotometer and lidar data, were used in order to validate the aerosol mass concentration profiles estimated by the air quality model CAMx. Lidar and CIMEL measurements performed at the Laboratory of Atmospheric Physics of the Aristotle University of Thessaloniki, Greece (40.5N, 22.9E) from the period 2013-2014 were used in this study.
NASA Astrophysics Data System (ADS)
Shirokoff, J.; Lewis, J. Courtenay
2010-10-01
The aromaticity and crystallite parameters in asphalt binders are calculated from data obtained after profile fitting x-ray line spectra using Pearson VII and pseudo-Voigt functions. The results are presented and discussed in terms of the peak profile fit parameters used, peak deconvolution procedure, and differences in calculated values that can arise owing to peak shape and additional peaks present in the pattern. These results have implications concerning the evaluation and performance of asphalt binders used in highways and road applications.
Kinetic simulations of the stability of a plasma confined by the magnetic field of a current rod
NASA Astrophysics Data System (ADS)
Tonge, J.; Leboeuf, J. N.; Huang, C.; Dawson, J. M.
2003-09-01
The kinetic stability of a plasma in the magnetic field of a current rod is investigated for various temperature and density profiles using three-dimensional particle-in-cell simulations. Such a plasma obeys similar physics to a plasma in a dipole magnetic field, while it is easier to perform computer simulations, and do theoretical analysis, of a plasma in the field of a current rod. Simple energy principle calculations and simulations with a variety of temperature and density profiles show that the plasma is stable to interchange for pressure profiles proportional to r-10/3. As predicted by theory the simulations also show that the density profile will be stationary as long as density is proportional to r-2 even though the temperature profile may not be stable.
NASA Technical Reports Server (NTRS)
Kelly, K. K.; Tuck, A. F.; Heidt, L. E.; Loewenstein, M.; Podolske, J. R.; Strahan, S. E.; Vedder, J. F.
1990-01-01
Vertical profiles of water vapor inside the Antarctic vortex have been compared with those taken outside it over Punta Arenas (53 deg S, 71 deg W). A similar exercise was performed with Arctic vortex profiles and those taken over Stavanger (59 deg N, 6 deg E). Residual water, defined as the stratospheric water vapor mixing ratio with the contribution from methane oxidation subtracted, is also shown as profiles inside and outside the vortex for both missions. The Arctic and Antarctic profiles of water vapor and residual water are compared. Locally dehydrated air was evident both inside and outside the Antarctic vortex, but such dehydration was not evident in and around the Arctic vortex. Arctic profiles of residual water are consistent with nontropical entry for some air.
Logerstedt, David; Arundale, Amelia; Lynch, Andrew; Snyder-Mackler, Lynn
2015-01-01
Injuries to the knee, including intra-articular fractures, ligamentous ruptures, and meniscal and articular cartilage lesions, are commonplace within sports. Despite advancements in surgical techniques and enhanced rehabilitation, athletes returning to cutting, pivoting, and jumping sports after a knee injury are at greater risk of sustaining a second injury. The clinical utility of objective criteria presents a decision-making challenge to ensure athletes are fully rehabilitated and safe to return to sport. A system centered on specific indicators that can be used to develop a comprehensive profile to monitor rehabilitation progression and to establish return to activity criteria is recommended to clear athletes to begin a progressive and systematic approach to activities and sports. Integration of a sports knee injury performance profile with return to activity criteria can guide clinicians in facilitating an athlete's safe return to sport, prevention of subsequent injury, and life-long knee joint health.
Analysis and testing of high entrainment single nozzle jet pumps with variable mixing tubes
NASA Technical Reports Server (NTRS)
Hickman, K. E.; Hill, P. G.; Gilbert, G. B.
1972-01-01
An analytical model was developed to predict the performance characteristics of axisymmetric single-nozzle jet pumps with variable area mixing tubes. The primary flow may be subsonic or supersonic. The computer program uses integral techniques to calculate the velocity profiles and the wall static pressures that result from the mixing of the supersonic primary jet and the subsonic secondary flow. An experimental program was conducted to measure mixing tube wall static pressure variations, velocity profiles, and temperature profiles in a variable area mixing tube with a supersonic primary jet. Static pressure variations were measured at four different secondary flow rates. These test results were used to evaluate the analytical model. The analytical results compared well to the experimental data. Therefore, the analysis is believed to be ready for use to relate jet pump performance characteristics to mixing tube design.
Brightness analysis of an electron beam with a complex profile
NASA Astrophysics Data System (ADS)
Maesaka, Hirokazu; Hara, Toru; Togawa, Kazuaki; Inagaki, Takahiro; Tanaka, Hitoshi
2018-05-01
We propose a novel analysis method to obtain the core bright part of an electron beam with a complex phase-space profile. This method is beneficial to evaluate the performance of simulation data of a linear accelerator (linac), such as an x-ray free electron laser (XFEL) machine, since the phase-space distribution of a linac electron beam is not simple, compared to a Gaussian beam in a synchrotron. In this analysis, the brightness of undulator radiation is calculated and the core of an electron beam is determined by maximizing the brightness. We successfully extracted core electrons from a complex beam profile of XFEL simulation data, which was not expressed by a set of slice parameters. FEL simulations showed that the FEL intensity was well remained even after extracting the core part. Consequently, the FEL performance can be estimated by this analysis without time-consuming FEL simulations.
Logerstedt, David; Arundale, Amelia; Lynch, Andrew; Snyder-Mackler, Lynn
2015-01-01
Injuries to the knee, including intra-articular fractures, ligamentous ruptures, and meniscal and articular cartilage lesions, are commonplace within sports. Despite advancements in surgical techniques and enhanced rehabilitation, athletes returning to cutting, pivoting, and jumping sports after a knee injury are at greater risk of sustaining a second injury. The clinical utility of objective criteria presents a decision-making challenge to ensure athletes are fully rehabilitated and safe to return to sport. A system centered on specific indicators that can be used to develop a comprehensive profile to monitor rehabilitation progression and to establish return to activity criteria is recommended to clear athletes to begin a progressive and systematic approach to activities and sports. Integration of a sports knee injury performance profile with return to activity criteria can guide clinicians in facilitating an athlete's safe return to sport, prevention of subsequent injury, and life-long knee joint health. PMID:26537805
Effectiveness of an Individualized Training Based on Force-Velocity Profiling during Jumping
Jiménez-Reyes, Pedro; Samozino, Pierre; Brughelli, Matt; Morin, Jean-Benoît
2017-01-01
Ballistic performances are determined by both the maximal lower limb power output (Pmax) and their individual force-velocity (F-v) mechanical profile, especially the F-v imbalance (FVimb): difference between the athlete's actual and optimal profile. An optimized training should aim to increase Pmax and/or reduce FVimb. The aim of this study was to test whether an individualized training program based on the individual F-v profile would decrease subjects' individual FVimb and in turn improve vertical jump performance. FVimb was used as the reference to assign participants to different training intervention groups. Eighty four subjects were assigned to three groups: an “optimized” group divided into velocity-deficit, force-deficit, and well-balanced sub-groups based on subjects' FVimb, a “non-optimized” group for which the training program was not specifically based on FVimb and a control group. All subjects underwent a 9-week specific resistance training program. The programs were designed to reduce FVimb for the optimized groups (with specific programs for sub-groups based on individual FVimb values), while the non-optimized group followed a classical program exactly similar for all subjects. All subjects in the three optimized training sub-groups (velocity-deficit, force-deficit, and well-balanced) increased their jumping performance (12.7 ± 5.7% ES = 0.93 ± 0.09, 14.2 ± 7.3% ES = 1.00 ± 0.17, and 7.2 ± 4.5% ES = 0.70 ± 0.36, respectively) with jump height improvement for all subjects, whereas the results were much more variable and unclear in the non-optimized group. This greater change in jump height was associated with a markedly reduced FVimb for both force-deficit (57.9 ± 34.7% decrease in FVimb) and velocity-deficit (20.1 ± 4.3%) subjects, and unclear or small changes in Pmax (−0.40 ± 8.4% and +10.5 ± 5.2%, respectively). An individualized training program specifically based on FVimb (gap between the actual and optimal F-v profiles of each individual) was more efficient at improving jumping performance (i.e., unloaded squat jump height) than a traditional resistance training common to all subjects regardless of their FVimb. Although improving both FVimb and Pmax has to be considered to improve ballistic performance, the present results showed that reducing FVimb without even increasing Pmax lead to clearly beneficial jump performance changes. Thus, FVimb could be considered as a potentially useful variable for prescribing optimal resistance training to improve ballistic performance. PMID:28119624
Anchorage School District Profile of Performance 1997-98. Assessment and Evaluation Report #98-3.
ERIC Educational Resources Information Center
Fenton, Ray
The Anchorage School District (Alaska) provides a comprehensive program of education to students from kindergarten through grade 12. This profile focuses on student achievement and other outcome indicators of student success, but it does not include information on the social or physical wellness of Anchorage students. The first section gives an…
ERIC Educational Resources Information Center
Moynihan, Christy; And Others
This study examined the relationship between graduate medical education (GME) and practice profiles in three specialties: family practice, psychiatry, and obstetrics/gynecology. Two analyses were performed, the first assessing the relationship between GME and current practice patterns and the second assessing the relationship between GME and…
A Latent Profile Analysis of Math Achievement, Numerosity, and Math Anxiety in Twins
ERIC Educational Resources Information Center
Hart, Sara A.; Logan, Jessica A. R.; Thompson, Lee; Kovas, Yulia; McLoughlin, Gráinne; Petrill, Stephen A.
2016-01-01
Underperformance in math is a problem with increasing prevalence, complex etiology, and severe repercussions. This study examined the etiological heterogeneity of math performance in a sample of 264 pairs of 12-year-old twins assessed on measures of math achievement, numerosity, and math anxiety. Latent profile analysis indicated 5 groupings of…
Profiles of Personal Resiliency in Youth Who Have Experienced Physical or Sexual Abuse
ERIC Educational Resources Information Center
Deblinger, Esther; Runyon, Melissa K.; Steer, Robert A.
2014-01-01
To determine whether children and adolescents (7-17 years old) who had experienced physical, sexual, or both types of abuse reflected distinct profiles of personal resiliency, we administered the "Resiliency Scales for Children and Adolescents" (RSCA) to 250 youth. We performed cluster analyses with T scores for the RSCA Self-Mastery,…
Student Motivational Profiles in an Introductory MIS Course: An Exploratory Cluster Analysis
ERIC Educational Resources Information Center
Nelson, Klara
2014-01-01
This study profiles students in an introductory MIS course according to a variety of variables associated with choice of academic major. The data were collected through a survey administered to 12 sections of the course. A two-step cluster analysis was performed with gender as a categorical variable and students' perceptions of task value…
Taiwanese College Students' Reading Practices and Profiles in Both Print- and Internet-Based Formats
ERIC Educational Resources Information Center
Chen, Su-Yen; Fang, Sheng-Ping
2014-01-01
This study expanded the definition of reading practices to include both print- and Internet-based reading, and examined the relationship of reading profiles to Taiwanese college students' performance on various practices. The results showed that more time was spent on Internet-than print-based extracurricular reading, and that the three…
Singapore Primary Students' Pursuit of Multiple Achievement Goals: A Latent Profile Analysis
ERIC Educational Resources Information Center
Ning, Hoi Kwan
2018-01-01
Based on measures of approach and avoidance mastery and performance goals delineated in the 2 × 2 achievement goal framework, this study utilized a person-centered approach to examine Singapore primary students' (N = 819) multiple goals pursuit in the general school context. Latent profile analysis identified six types of students with distinct…
ERIC Educational Resources Information Center
Yogev, Sima; Yogev, Abraham
2006-01-01
The teacher research movement has encouraged the development of "practitioner research" action-oriented and reflective studies among teachers and teacher educators alike. This study compares the profile of research conducted in the Israeli academic teacher colleges with that performed by university faculty. A content analysis of the 204…
ERIC Educational Resources Information Center
Matthews, Nicole L.; Pollard, Elena; Ober-Reynolds, Sharman; Kirwan, Janet; Malligo, Amanda; Smith, Christopher J.
2015-01-01
Profiles of performance on the Stanford Binet Intelligence Scales (SB5) and Vineland Adaptive Behavior Scales (VABS) were examined in 73 children and adolescents with autism spectrum disorder. SB5 cognitive profiles were observed to be similar between participants with and without early language delay, but different between participants with and…
Power profiles and short-term visual performance of soft contact lenses.
Papas, Eric; Dahms, Anne; Carnt, Nicole; Tahhan, Nina; Ehrmann, Klaus
2009-04-01
To investigate the manner in which contemporary soft contact lenses differ in the distribution of optical power within their optic zones and establish if these variations affect the vision of wearers or the prescribing procedure for back vertex power (BVP). By using a Visionix VC 2001 contact lens power analyzer, power profiles were measured across the optic zones of the following contemporary contact lenses ACUVUE 2, ACUVUE ADVANCE, O2OPTIX, NIGHT & DAY and PureVision. Single BVP measures were obtained using a Nikon projection lensometer. Visual performance was assessed in 28 masked subjects who wore each lens type in random order. Measurements taken were high and low contrast visual acuity in normal illumination (250 Cd/m), high contrast acuity in reduced illumination (5 Cd/m), subjective visual quality using a numerical rating scale, and visual satisfaction rating using a Likert scale. Marked differences in the distribution of optical power across the optic zone were evident among the lens types. No significant differences were found for any of the visual performance variables (p > 0.05, analysis of variance with repeated measures and Friedman test). Variations in power profile between contemporary soft lens types exist but do not, in general, result in measurable visual performance differences in the short term, nor do they substantially influence the BVP required for optimal correction.
Tariq, Sundus; Lone, Khalid Parvez; Tariq, Saba
2016-01-01
Optimal physical activity is important in attaining a peak bone mass. Physically active women have better bone mineral density and reduce fracture risk as compared to females living a sedentary life. The objective of this study was to compare parameters of bone profile and serum homocysteine levels in physically active and non-active postmenopausal females. In this cross sectional study postmenopausal females between 50-70 years of age were recruited and divided into two groups: Physically inactive (n=133) performing light physical activity and Physically active (n=34) performing moderate physical activity. Physical activity (in metabolic equivalents), bone mineral density and serum homocysteine levels were assessed. Spearman's rho correlation was applied to observe correlations. Two independent sample t test and Mann Whitney U test were applied to compare groups. P-value ≤ 0.05 was taken statistically significant. Parameters of bone profile were significantly higher and serum homocysteine levels were significantly lower in postmenopausal females performing moderate physical activity as compared to females performing light physical activity. Homocysteine was not significantly related to T-score and Z-score in both groups. Improving physical activity could be beneficial for improving the quality of bone, decreasing fracture risk and decreasing serum homocysteine levels.
Individualised training to address variability of radiologists' performance
NASA Astrophysics Data System (ADS)
Sun, Shanghua; Taylor, Paul; Wilkinson, Louise; Khoo, Lisanne
2008-03-01
Computer-based tools are increasingly used for training and the continuing professional development of radiologists. We propose an adaptive training system to support individualised learning in mammography, based on a set of real cases, which are annotated with educational content by experienced breast radiologists. The system has knowledge of the strengths and weakness of each radiologist's performance: each radiologist is assessed to compute a profile showing how they perform on different sets of cases, classified by type of abnormality, breast density, and perceptual difficulty. We also assess variability in cognitive aspects of image perception, classifying errors made by radiologists as errors of search, recognition or decision. This is a novel element in our approach. The profile is used to select cases to present to the radiologist. The intelligent and flexible presentation of these cases distinguishes our system from existing training tools. The training cases are organised and indexed by an ontology we have developed for breast radiologist training, which is consistent with the radiologists' profile. Hence, the training system is able to select appropriate cases to compose an individualised training path, addressing the variability of the radiologists' performance. A substantial part of the system, the ontology has been evaluated on a large number of cases, and the training system is under implementation for further evaluation.
Multiphysics Computational Analysis of a Solid-Core Nuclear Thermal Engine Thrust Chamber
NASA Technical Reports Server (NTRS)
Wang, Ten-See; Canabal, Francisco; Cheng, Gary; Chen, Yen-Sen
2007-01-01
The objective of this effort is to develop an efficient and accurate computational heat transfer methodology to predict thermal, fluid, and hydrogen environments for a hypothetical solid-core, nuclear thermal engine - the Small Engine. In addition, the effects of power profile and hydrogen conversion on heat transfer efficiency and thrust performance were also investigated. The computational methodology is based on an unstructured-grid, pressure-based, all speeds, chemically reacting, computational fluid dynamics platform, while formulations of conjugate heat transfer were implemented to describe the heat transfer from solid to hydrogen inside the solid-core reactor. The computational domain covers the entire thrust chamber so that the afore-mentioned heat transfer effects impact the thrust performance directly. The result shows that the computed core-exit gas temperature, specific impulse, and core pressure drop agree well with those of design data for the Small Engine. Finite-rate chemistry is very important in predicting the proper energy balance as naturally occurring hydrogen decomposition is endothermic. Locally strong hydrogen conversion associated with centralized power profile gives poor heat transfer efficiency and lower thrust performance. On the other hand, uniform hydrogen conversion associated with a more uniform radial power profile achieves higher heat transfer efficiency, and higher thrust performance.
NASA Astrophysics Data System (ADS)
Leke, J. R.; Mandey, J. S.; Laihad, J. T.; Tinangon, R. M.; Tangkau, L.; Junus, C.
2018-01-01
The study was conducted to determine the use of fish oil as by-product of fish canning factory in diet on the performance and lipid profiles of native chickens. The experiment used 100 native chicken with an average initial body weight of 48,9 gram (sd + 9.9), was used in this study for 8 weeks experiment. These were arranged by a completely randomized design with 5 treatments, 5 replications and 4 hens in replication each. The diets were: R0 = 100% Based Diet (BD) + 0% Fish Oil (FO); R1 = 98.5% BD + 1.5% FO; R2 = 98% BD + 2% FO; R3 = 97.5% BD + 2.5% FO; R4 = 97 % BD + 3% FO. Feed and water were provided ad libitum. Variables were performance parameters and lipid profiles. Results showed that fish oil inclusion in diets were significantly increased feed intake, body weight gain, carcass percentage, liver, breast and thigh weight, and decreased blood cholesterol, carbohydrate and meat cholesterol, and also tended to decrease abdominal fat. However, there were no affected on feed conversion, water, protein, fat and ash of breast meat. It can be concluded that the use of fish oil in diet up to 3% could improved performance parameters of native chickens.
Long-Term Pavement Performance Automated Faulting Measurement
DOT National Transportation Integrated Search
2015-02-01
This study focused on identifying transverse joint locations on jointed plain concrete pavements using an automated joint detection algorithm and computing faulting at these locations using Long-Term Pavement Performance (LTPP) Program profile data c...
NICU Network Neurobehavioral Profiles Predict Developmental Outcomes in a Low Risk Sample
Sucharew, Heidi; Khoury, Jane C.; Xu, Yingying; Succop, Paul; Yolton, Kimberly
2012-01-01
Summary Latent profile analysis (LPA) has been used previously to classify neurobehavioral responses of infants prenatally exposed to cocaine and other drugs of abuse. The objective of this study was to define NICU Network Neurobehavioral Scale (NNNS) profile response patterns in a cohort of infants with no known cocaine exposure or other risks for neurobehavior deficits, and determine whether these profiles predict neurobehavioral outcomes in these low-risk infants. NNNS exams were performed on 355 low-risk infants at approximately 5 weeks after birth. LPA was used to define discrete profiles based on the standard NNNS summary scales. Associations between the infant profiles and neurobehavioral outcomes at one to three years of age were examined. Twelve of the 13 summary scales were used and three discrete NNNS profiles identified: social/easy going infants (44%), hypotonic infants (24%), and high arousal/difficult infants (32%). Statistically significant associations between NNNS profiles and later neurobehavioral outcomes were found for psychomotor development and externalizing behaviors. Hypotonic infants had both lower psychomotor development and lower externalizing scores compared to the other two profiles. In conclusion, three distinct profiles of the NNNS summary scores were identifiable using LPA among infants with no known cocaine exposure. These profile patterns were associated with early childhood neurobehavioral outcome, similar to findings reported in a study of infants with substantial cocaine exposure, demonstrating the utility of this profiling technique in both exposed and unexposed populations. PMID:22686386
Improving Forecast Skill by Assimilation of AIRS Temperature Soundings
NASA Technical Reports Server (NTRS)
Susskind, Joel; Reale, Oreste
2010-01-01
AIRS was launched on EOS Aqua on May 4, 2002, together with AMSU-A and HSB, to form a next generation polar orbiting infrared and microwave atmospheric sounding system. The primary products of AIRS/AMSU-A are twice daily global fields of atmospheric temperature-humidity profiles, ozone profiles, sea/land surface skin temperature, and cloud related parameters including OLR. The AIRS Version 5 retrieval algorithm, is now being used operationally at the Goddard DISC in the routine generation of geophysical parameters derived from AIRS/AMSU data. A major innovation in Version 5 is the ability to generate case-by-case level-by-level error estimates delta T(p) for retrieved quantities and the use of these error estimates for Quality Control. We conducted a number of data assimilation experiments using the NASA GEOS-5 Data Assimilation System as a step toward finding an optimum balance of spatial coverage and sounding accuracy with regard to improving forecast skill. The model was run at a horizontal resolution of 0.5 deg. latitude X 0.67 deg longitude with 72 vertical levels. These experiments were run during four different seasons, each using a different year. The AIRS temperature profiles were presented to the GEOS-5 analysis as rawinsonde profiles, and the profile error estimates delta (p) were used as the uncertainty for each measurement in the data assimilation process. We compared forecasts analyses generated from the analyses done by assimilation of AIRS temperature profiles with three different sets of thresholds; Standard, Medium, and Tight. Assimilation of Quality Controlled AIRS temperature profiles significantly improve 5-7 day forecast skill compared to that obtained without the benefit of AIRS data in all of the cases studied. In addition, assimilation of Quality Controlled AIRS temperature soundings performs better than assimilation of AIRS observed radiances. Based on the experiments shown, Tight Quality Control of AIRS temperature profile performs best on the average from the perspective of improving Global 7 day forecast skill.
Stability of personality traits in schizophrenia and schizoaffective disorder: a pilot project.
Kentros, M; Smith, T E; Hull, J; McKee, M; Terkelsen, K; Capalbo, C
1997-09-01
This study was performed in an effort to begin characterization of personality traits in schizophrenia. Specific concerns included personality profiles relative to normal adults, personality profile stability over time, and trait-state issues. The authors administered the NEO Personality Inventory as well as symptom ratings at two time points to 21 patients. Patients were all stabilized outpatients attending an adult continuing day treatment program and diagnosed with either schizophrenia or schizoaffective disorder. Personality profiles were determined for all patients. Compared with a normal adult sample, this sample's scores on three out of five of the personality domains assessed were not distinguishable from normal adults. Test-retest correlations were highly significant over an average 28.2-week time interval. In general, the presence of positive symptoms did not appear related to NEO-PI stability, while negative symptoms did show a relationship to the stability of personality profiles. These data suggest that personality profiles can be looked at in schizophrenia, that these profiles do appear stable over time, and that negative symptoms have a strong influence on profile stability and appear to be "trait-like."
NASA Astrophysics Data System (ADS)
Zhang, Shouyin; Gao, Xiang; Li, Jiangang; Wan, Baonian; Kuang, Guangli; Mao, Jianshan; Zhang, Xiaodong; Xie, Jikang; Wan, Yuanxi; Team HT-7
2000-10-01
In HT-7 superconducting tokamak of circular limiter configuration (R0=122cm, a=30cm, Bt:1 ~2.2T), plasma profiles were modified and controlled by means of gas puffing, supersonic molecule injection, pellet injection, ICRF and IBW heating as well as LHW heating and current drive; improved plasma confinements were achieved either by application of one of the above measures or by the combination of them, study of the effects of the characteristics of plasma profiles on plasma confinements were performed. The results show that in most of the improved confinement plasmas in HT-7, there are very steep and strong peeking electron temperature profiles in core plasma, and/or large decrease of local temperature in radius of 0.5 ~0.7a which makes temperature gradient steeper when improvements begin, as temperature profile evolves back to previous normal shape the improvements end. Electron density profile and soft X-ray profiles were studied as well. This research was supported under Natural Science Foundation of China contract No.19905010.
New figuring model based on surface slope profile for grazing-incidence reflective optics
Zhou, Lin; Huang, Lei; Bouet, Nathalie; ...
2016-08-09
Surface slope profile is widely used in the metrology of grazing-incidence reflective optics instead of surface height profile. Nevertheless, the theoretical and experimental model currently used in deterministic optical figuring processes is based on surface height, not on surface slope. This means that the raw slope profile data from metrology need to be converted to height profile to perform the current height-based figuring processes. The inevitable measurement noise in the raw slope data will introduce significant cumulative error in the resultant height profiles. As a consequence, this conversion will degrade the determinism of the figuring processes, and will have anmore » impact on the ultimate surface figuring results. To overcome this problem, an innovative figuring model is proposed, which directly uses the raw slope profile data instead of the usual height data as input for the deterministic process. In this article, first the influence of the measurement noise on the resultant height profile is analyzed, and then a new model is presented; finally a demonstration experiment is carried out using a one-dimensional ion beam figuring process to demonstrate the validity of our approach.« less
Interferometric analysis of the ablation profile in refractive surgery
NASA Astrophysics Data System (ADS)
Rodríguez-Rodríguez, M. I.; López-Olazagasti, E.; Rosales, M. A.; Ramírez-Zavaleta, G.; Cantú, R.; Tepichín, E.
2008-08-01
In ophthalmology, the laser excimer corneal surface ablation used to correct the refractive eye defects, such as myopia, astigmatism and hyperopia and, more recently, presbyopia is known as refractive surgery. Typically, the characterization of the corresponding technique, as well as the laser accuracy, is performed by analyzing standard ablation profiles made on PMMA (polymethylmethacrylate) plates. A drawback of this technique is that those plates do not necessarily represent the dimensions of the cornea during the ablation. On the other hand, due to the time varying process of the eye aberrations, the direct eye refractometric measurements can produce some errors. We report in this work the interferometric analysis of the ablation profile obtained with refractive surgery, applied directly on a contact lens. In this case, the resultant ablation profile might be closer to the real profile as well as time invariant. We use, as a reference, a similar contact lens without ablation. The preliminary results of the characterization of the corresponding ablation profile are also presented.
Diffusion pore imaging with generalized temporal gradient profiles.
Laun, Frederik B; Kuder, Tristan A
2013-09-01
In porous material research, one main interest of nuclear magnetic resonance diffusion (NMR) experiments is the determination of the shape of pores. While it has been a longstanding question if this is in principle achievable, it has been shown recently that it is indeed possible to perform NMR-based diffusion pore imaging. In this work we present a generalization of these previous results. We show that the specific temporal gradient profiles that were used so far are not unique as more general temporal diffusion gradient profiles may be used. These temporal gradient profiles may consist of any number of "short" gradient pulses, which fulfil the short-gradient approximation. Additionally, "long" gradient pulses of small amplitude may be present, which can be used to fulfil the rephasing condition for the complete profile. Some exceptions exist. For example, classical q-space gradients consisting of two short gradient pulses of opposite sign cannot be used as the phase information is lost due to the temporal antisymmetry of this profile. Copyright © 2013 Elsevier Inc. All rights reserved.
CP-ABE Based Privacy-Preserving User Profile Matching in Mobile Social Networks
Cui, Weirong; Du, Chenglie; Chen, Jinchao
2016-01-01
Privacy-preserving profile matching, a challenging task in mobile social networks, is getting more attention in recent years. In this paper, we propose a novel scheme that is based on ciphertext-policy attribute-based encryption to tackle this problem. In our scheme, a user can submit a preference-profile and search for users with matching-profile in decentralized mobile social networks. In this process, no participant’s profile and the submitted preference-profile is exposed. Meanwhile, a secure communication channel can be established between the pair of successfully matched users. In contrast to existing related schemes which are mainly based on the secure multi-party computation, our scheme can provide verifiability (both the initiator and any unmatched user cannot cheat each other to pretend to be matched), and requires few interactions among users. We provide thorough security analysis and performance evaluation on our scheme, and show its advantages in terms of security, efficiency and usability over state-of-the-art schemes. PMID:27337001
CP-ABE Based Privacy-Preserving User Profile Matching in Mobile Social Networks.
Cui, Weirong; Du, Chenglie; Chen, Jinchao
2016-01-01
Privacy-preserving profile matching, a challenging task in mobile social networks, is getting more attention in recent years. In this paper, we propose a novel scheme that is based on ciphertext-policy attribute-based encryption to tackle this problem. In our scheme, a user can submit a preference-profile and search for users with matching-profile in decentralized mobile social networks. In this process, no participant's profile and the submitted preference-profile is exposed. Meanwhile, a secure communication channel can be established between the pair of successfully matched users. In contrast to existing related schemes which are mainly based on the secure multi-party computation, our scheme can provide verifiability (both the initiator and any unmatched user cannot cheat each other to pretend to be matched), and requires few interactions among users. We provide thorough security analysis and performance evaluation on our scheme, and show its advantages in terms of security, efficiency and usability over state-of-the-art schemes.
Lievens, Hans; Vernieuwe, Hilde; Álvarez-Mozos, Jesús; De Baets, Bernard; Verhoest, Niko E.C.
2009-01-01
In the past decades, many studies on soil moisture retrieval from SAR demonstrated a poor correlation between the top layer soil moisture content and observed backscatter coefficients, which mainly has been attributed to difficulties involved in the parameterization of surface roughness. The present paper describes a theoretical study, performed on synthetical surface profiles, which investigates how errors on roughness parameters are introduced by standard measurement techniques, and how they will propagate through the commonly used Integral Equation Model (IEM) into a corresponding soil moisture retrieval error for some of the currently most used SAR configurations. Key aspects influencing the error on the roughness parameterization and consequently on soil moisture retrieval are: the length of the surface profile, the number of profile measurements, the horizontal and vertical accuracy of profile measurements and the removal of trends along profiles. Moreover, it is found that soil moisture retrieval with C-band configuration generally is less sensitive to inaccuracies in roughness parameterization than retrieval with L-band configuration. PMID:22399956
FaSTR DNA: a new expert system for forensic DNA analysis.
Power, Timothy; McCabe, Brendan; Harbison, Sally Ann
2008-06-01
The automation of DNA profile analysis of reference and crime samples continues to gain pace driven in part by a realisation by the criminal justice system of the positive impact DNA technology can have in aiding in the solution of crime and the apprehension of suspects. Expert systems to automate the profile analysis component of the process are beginning to be developed. In this paper, we report the validation of a new expert system FaSTR DNA, an expert system suitable for the analysis of DNA profiles from single source reference samples and from crime samples. We compare the performance of FaSTR DNA with that of other equivalent systems, GeneMapper ID v3.2 (Applied Biosystems, Foster City, CA) and FSS-i(3) v4 (The Forensic Science Service((R)) DNA expert System Suite FSS-i(3), Forensic Science Service, Birmingham, UK) with GeneScan Analysis v3.7/Genotyper v3.7 software (Applied Biosystems, Foster City, CA, USA) with manual review. We have shown that FaSTR DNA provides an alternative solution to automating DNA profile analysis and is appropriate for implementation into forensic laboratories. The FaSTR DNA system was demonstrated to be comparable in performance to that of GeneMapper ID v3.2 and superior to that of FSS-i(3) v4 for the analysis of DNA profiles from crime samples.
NASA Technical Reports Server (NTRS)
Zak, J. Allen; Rodgers, William G., Jr.; Nolf, Scott; McKissick, Burnell T. (Technical Monitor)
2001-01-01
There has been a renewed interest in the application of remote sensor technology to operational aviation and airport-related activities such as Aircraft Vortex Spacing System (AVOSS). Radio Acoustic Sounding Systems (RASS), Doppler-acoustic sodars, Ultrahigh Frequencies (UHF) profilers and lidars have many advantages in measuring wind and temperature profiles in the lower atmospheric boundary layer since they can operate more or less continuously and unattended; however, there are limitations in their operational use at airports. For example, profilers deteriorate (limited altitude coverage or missing) in moderate or greater rain and can be affected by airplane targets in their field of view. Sodars can handle precipitation better but are affected by the high noise environments of airports and strong winds. Morning temperature inversions typically limit performance of RASS, sodars and profilers. Fog affects sonic anemometers. Lidars can have difficulties in clouds, fog or heavy precipitation. Despite their limitations these sensors have proven useful to provide wind and temperature profiles for AVOSS. Capabilities and limitations of these and other sensors used in the AVOSS program are discussed, parameter settings for the sensor systems are documented, and recommendations are made for the most cost-effective group of sensors for the future. The potential use of specially tuned dynamic forecast models and measurements from landing and departing aircraft are addressed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Liu, Xiuyan; Luan, Xin; Daniel Deng, Z.
An autonomous Moored Reciprocating Vertical Profiler (MRVP) has been developed and tested for measuring ocean turbulence. The MRVP is designed to combine the advantages of long-term moored measurements at specified depths with those of short-term ship-supported continuous profiling performed at high vertical resolution. The profiler is programmed to repeat vertical motions autonomously along the mooring cable based on a buoyancy-driven mechanism. A sea trial has been conducted in the South China Sea to evaluate the performance of the profiler. The shear probe data are unreliable when the flow past sensors is not sufficiently greater than an estimate of turbulent velocity.more » For 65% of the dataset, turbulence measurements are of high quality and the magnitude of dissipation rates is up to O(10 -10) W kg -1. To minimize the contamination induced by instrument vibration and improve the estimation of turbulent kinetic energy terms, an advanced cross-spectrum algorithm is implemented to the measured shear data. The corrected spectra agrees well with the empirical Nasmyth spectrum, and dissipation rates had averagely decreased a factor of 2 and 8 times lower than the raw spectra. The autonomous MRVP is proven to be a stable platform, and the novel upward measurement provides a new perspective for measuring long-term time series of turbulence mixing.« less
NASA Astrophysics Data System (ADS)
Ciptadi, G.; Rahayu, S.; Fatchiyah; Wahyuningsih, S.; Budiarto, A.; Nasich, M.; Putri, A. R. I.; Mudawamah, M.; Ihsan, M. N.
2018-02-01
This research aims were to study the effect of the oocyte and sperms cryopreservation of Indonesian local goat on the post-thawing quality and profile or characters of Calcium+2 intensity in relating with their fertility capacity. A study was conducted to test the freezing method and post-thawing viability both stock cells stored in the deep freezer and liquid nitrogen (-80°C of vs -196°C). A fertility test of sperms has been conducted through in vitro of sperm quality, while the oocytes cryopreserved test was done by in vitro maturation (IVM) rate (%). The profile of Calcium 2+ was performed and analysis by Confocal Laser Scanned Microscope (CLSM). The result showed that IVM rate of goat oocyte is considered lower when cryopreserved in -80°C than in -196°C. Meanwhile, sperm is considered having a good quality in 2 methods of cryopreservation with post-thawing motility > 40 % (SNI 2014). There is an important difference between Calcium intensity of fresh and post-thawing both for oocyte and spermatozoa. Calcium +2 profiles is varied individually on the peak of intensity, but it considered expressed the same profile of each fresh and post-thawing cell. In vitro fertilization test need to be performed to complete the viability and fertility competence of these sperm and oocyte freezing stocks.
Global gyrokinetic simulations of intrinsic rotation in ASDEX Upgrade Ohmic L-mode plasmas
NASA Astrophysics Data System (ADS)
Hornsby, W. A.; Angioni, C.; Lu, Z. X.; Fable, E.; Erofeev, I.; McDermott, R.; Medvedeva, A.; Lebschy, A.; Peeters, A. G.; The ASDEX Upgrade Team
2018-05-01
Non-linear, radially global, turbulence simulations of ASDEX Upgrade (AUG) plasmas are performed and the nonlinear generated intrinsic flow shows agreement with the intrinsic flow gradients measured in the core of Ohmic L-mode plasmas at nominal parameters. Simulations utilising the kinetic electron model show hollow intrinsic flow profiles as seen in a predominant number of experiments performed at similar plasma parameters. In addition, significantly larger flow gradients are seen than in a previous flux-tube analysis (Hornsby et al 2017 Nucl. Fusion 57 046008). Adiabatic electron model simulations can show a flow profile with opposing sign in the gradient with respect to a kinetic electron simulation, implying a reversal in the sign of the residual stress due to kinetic electrons. The shaping of the intrinsic flow is strongly determined by the density gradient profile. The sensitivity of the residual stress to variations in density profile curvature is calculated and seen to be significantly stronger than to neoclassical flows (Hornsby et al 2017 Nucl. Fusion 57 046008). This variation is strong enough on its own to explain the large variations in the intrinsic flow gradients seen in some AUG experiments. Analysis of the symmetry breaking properties of the turbulence shows that profile shearing is the dominant mechanism in producing a finite parallel wave-number, with turbulence gradient effects contributing a smaller portion of the parallel wave-vector.
Khalaf, K A; Parnianpour, M; Sparto, P J; Barin, K
1999-01-01
In any quantitative gait or occupational biomechanics investigation, the quantification of the different kinematic, kinetic, and electromyographic parameters is essential towards assessment of functional capacity and development of a biomechanical profile of the task demands. In the current study, the authors presented a methodology for using inferential statistics to evaluate the effect of lift characteristics on phase-dependent and phase-independent variability in performance. Using a database of kinematic and kinetic profiles obtained from a manual lifting study, the phase-dependent effects of lift characteristics: box mass (load), mode (technique of lift), and speed (frequency of lift) were investigated through the use of analysis of variance (ANOVA) techniques, which recognize the vectorial constitution of the profiles. In addition, the Karhunen-Loeve Expansion (KLE) feature extraction method was used for representing the lifting patterns of measured joint angular position, velocity, acceleration, and net muscular torque profiles obtained from a 2-D biomechanical lifting model in order to study the phase-independent effects. In comparison to traditional descriptive statistical analyses currently used in various occupational biomechanics experimental investigations, this method allows the significant information content of the time varying signal to be captured, enhancing the sensitivity of subsequent hypothesis testing procedures. The application of this technique to MMH investigations allows identification of the lift characteristics that dominate the variability of task demands, hence aiding in the design and assessment of ergonomic solutions.
Ultra-narrow band diode lasers with arbitrary pulse shape modulation (Conference Presentation)
NASA Astrophysics Data System (ADS)
Ryasnyanskiy, Aleksandr I.; Smirnov, Vadim; Mokhun, Oleksiy; Glebov, Alexei L.; Glebov, Leon B.
2017-03-01
Wideband emission spectra of laser diode bars (several nanometers) can be largely narrowed by the usage of thick volume Bragg gratings (VBGs) recorded in photo-thermo-refractive glass. Such narrowband systems, with GHz-wide emission spectra, found broad applications for Diode Pumped Alkali vapor Lasers, optically pumped rare gas metastable lasers, Spin Exchange Optical Pumping, atom cooling, etc. Although the majority of current applications of narrow line diode lasers require CW operation, there are a variety of fields where operation in a different pulse mode regime is necessary. Commercial electric pulse generators can provide arbitrary current pulse profiles (sinusoidal, rectangular, triangular and their combinations). The pulse duration and repetition rate however, have an influence on the laser diode temperature, and therefore, the emitting wavelength. Thus, a detailed analysis is needed to understand the correspondence between the optical pulse profiles from a diode laser and the current pulse profiles; how the pulse profile and duty cycle affects the laser performance (e.g. the wavelength stability, signal to noise ratio, power stability etc.). We present the results of detailed studies of the narrowband laser diode performance operating in different temporal regimes with arbitrary pulse profiles. The developed narrowband (16 pm) tunable laser systems at 795 nm are capable of operating in different pulse regimes while keeping the linewidth, wavelength, and signal-to-noise ratio (>20 dB) similar to the corresponding CW modules.
Spiga, D
2018-01-01
X-ray mirrors with high focusing performances are commonly used in different sectors of science, such as X-ray astronomy, medical imaging and synchrotron/free-electron laser beamlines. While deformations of the mirror profile may cause degradation of the focus sharpness, a deliberate deformation of the mirror can be made to endow the focus with a desired size and distribution, via piezo actuators. The resulting profile can be characterized with suitable metrology tools and correlated with the expected optical quality via a wavefront propagation code or, sometimes, predicted using geometric optics. In the latter case and for the special class of profile deformations with monotonically increasing derivative, i.e. concave upwards, the point spread function (PSF) can even be predicted analytically. Moreover, under these assumptions, the relation can also be reversed: from the desired PSF the required profile deformation can be computed analytically, avoiding the use of trial-and-error search codes. However, the computation has been so far limited to geometric optics, which entailed some limitations: for example, mirror diffraction effects and the size of the coherent X-ray source were not considered. In this paper, the beam-shaping formalism in the framework of physical optics is reviewed, in the limit of small light wavelengths and in the case of Gaussian intensity wavefronts. Some examples of shaped profiles are also shown, aiming at turning a Gaussian intensity distribution into a top-hat one, and checks of the shaping performances computing the at-wavelength PSF by means of the WISE code are made.
Classification of Phylogenetic Profiles for Protein Function Prediction: An SVM Approach
NASA Astrophysics Data System (ADS)
Kotaru, Appala Raju; Joshi, Ramesh C.
Predicting the function of an uncharacterized protein is a major challenge in post-genomic era due to problems complexity and scale. Having knowledge of protein function is a crucial link in the development of new drugs, better crops, and even the development of biochemicals such as biofuels. Recently numerous high-throughput experimental procedures have been invented to investigate the mechanisms leading to the accomplishment of a protein’s function and Phylogenetic profile is one of them. Phylogenetic profile is a way of representing a protein which encodes evolutionary history of proteins. In this paper we proposed a method for classification of phylogenetic profiles using supervised machine learning method, support vector machine classification along with radial basis function as kernel for identifying functionally linked proteins. We experimentally evaluated the performance of the classifier with the linear kernel, polynomial kernel and compared the results with the existing tree kernel. In our study we have used proteins of the budding yeast saccharomyces cerevisiae genome. We generated the phylogenetic profiles of 2465 yeast genes and for our study we used the functional annotations that are available in the MIPS database. Our experiments show that the performance of the radial basis kernel is similar to polynomial kernel is some functional classes together are better than linear, tree kernel and over all radial basis kernel outperformed the polynomial kernel, linear kernel and tree kernel. In analyzing these results we show that it will be feasible to make use of SVM classifier with radial basis function as kernel to predict the gene functionality using phylogenetic profiles.
Del Cole, Carolina Grego; Caetano, Sheila Cavalcante; Ribeiro, Wagner; Kümmer, Arthur Melo E E; Jackowski, Andrea Parolin
2017-01-01
Adaptive behavior can be impaired in different neurodevelopmental disorders and may be influenced by confounding factors, such as intelligence quotient (IQ) and socioeconomic classification. Our main objective was to verify whether adaptive behavior profiles differ in three conditions-Williams Beuren syndrome (WBS), Down syndrome (DS), and autism spectrum disorder (ASD), as compared with healthy controls (HC) and with each other. Although the literature points towards each disorder having a characteristic profile, no study has compared profiles to establish the specificity of each one. A secondary objective was to explore potential interactions between the conditions and socioeconomic status, and whether this had any effect on adaptive behavior profiles. One hundred and five adolescents were included in the study. All adolescents underwent the following evaluations: the Vineland Adaptive Behavior Scale (VABS), the Wechsler Intelligence Scale for Children (WISC), and the Brazilian Economic Classification Criteria. Our results demonstrated that the WBS group performed better than the DS group in the communication domain, β = -15.08, t(3.45), p = .005, and better than the ASD group in the socialization domain, β = 8.92, t(-2.08), p = .013. The DS group also performed better than the ASD group in socialization, β = 16.98, t(-2.32), p = .024. IQ was an important confounding factor, and socioeconomic status had an important effect on the adaptive behavior of all groups. There is a heterogeneity regarding adaptive behavior profiles in WBS, DS, and ASD. These data are important to better design specific strategies related to the health and social care of each particular group.
Dunham, Annie L; Ramirez, Luis D; Vang, Choua A; Linebarger, Jared H; Landercasper, Jeffrey
2018-07-01
Patients want information to search for destination of care for breast-conserving surgery (BCS). To inform patients wanting a lumpectomy, we aimed to develop a pilot project that communicated composite quality measure (QM) results using a '4-star' rating system. Two patient-centered QMs were included in the model-reoperation rate (ROR) and cosmetic outcome (COSM). A prospective database was reviewed for stage 0-3 patients undergoing initial lumpectomy by three surgeons from 2010 to 2015. Self-reported COSM was assessed by survey. Multivariate analyses were used to test for interactions between surgeon and other variables known to influence RORs and COSMs. Models of surgeon profiling were developed that summed the ROR and COSM performance scores, then reported results using a Centers for Medicare and Medicaid Services (CMS) star-type system. Functionality for a patient to 'weight' the importance of the ratio of ROR:COSM before profiling was introduced. The unadjusted ROR for stage 1-3 patients for three surgeons was 9.5, 13.0, and 16.3%, respectively (p = 0.179) [overall rate 10.4% (38/366)]. After risk adjustment, differences between surgeons were observed for RORs, but not COSMs. Overall, patients reported excellent, good, fair, and poor COSMs of 55, 30, 11 and 4%, respectively. Composite star scores reflected differences in performance by surgeon, which could increase, or even disappear, dependent on the patient's weighting of the ROR:COSM ratio. Composite measures of performance can be developed that allow patients to input their weighted preferences and values into surgeon profiling before they consider a destination of care for BCS.
Review of Research on Low-Profile Vortex Generators to Control Boundary-Layer Separation
NASA Technical Reports Server (NTRS)
Lin, John C.
2002-01-01
An in-depth review of boundary-layer flow-separation control by a passive method using low-profile vortex generators is presented. The generators are defined as those with a device height between 10% and 50% of the boundary layer thickness. Key results are presented for several research efforts, all of which were performed within the past decade and a half where the majority of these works emphasize experimentation with some recent efforts on numerical simulations. Topics of discussion consist of both basic fluid dynamics and applied aerodynamics research. The fluid dynamics research includes comparative studies on separation control effectiveness as well as device-induced vortex characterization and correlation. The comparative studies cover the controlling of low-speed separated flows in adverse pressure gradient and supersonic shock-induced separation. The aerodynamics research includes several applications for aircraft performance enhancement and covers a wide range of speeds. Significant performance improvements are achieved through increased lift and/or reduced drag for various airfoils-low-Reynolds number, high-lift, and transonic-as well as highly swept wings. Performance enhancements for non-airfoil applications include aircraft interior noise reduction, inlet flow distortion alleviation inside compact ducts, and a more efficient overwing fairing. The low-profile vortex generators are best for being applied to applications where flow-separation locations are relatively fixed and the generators can be placed reasonably close upstream of the separation. Using the approach of minimal near-wall proturbances through substantially reduced device height, these devices can produce streamwise vortices just strong enough to overcome the separation without unnecessarily persisting within the boundary layer once the flow-control objective is achieved. Practical advantages of low-profile vortex generators, such as their inherent simplicity and low device drag, are demonstrated to be critically important for many applications as well.
Kelly, Benjamin M; Xenophontos, Soteris; King, James A; Nimmo, Myra A
2017-01-01
Both sprint interval training (SIT) and high-intensity intermittent training (HIIT) have been described as time-efficient strategies for inducing favourable metabolic and cardiorespiratory adaptations in healthy and diseased participants. To date, little attention has been given to profiling the potential health benefits of HIIT or modified HIIT training within overweight and obese cohorts with particular focus on inflammation. Within this pilot trial, we tested the hypothesis that 6 sessions of HIIT performed over 2 weeks with 1-2 days' rest would improve aerobic capacity, glucose metabolism and inflammatory profile in an overweight and obese male cohort. Additionally, we profiled the potential health benefits of 4 HIIT sessions performed over the same period. 18 overweight or obese males (BMI = 31.2 ± 3.6; V̇O 2 = 30.3 ± 4.4 ml.kg.min -1 ) were studied before and 72 h after HIIT. Training sessions consisted of 10 x 1 min intervals at 90% HR peak separated by 1 min recovery periods. Exercise was performed either 6 (group 1, n = 8) or 4 (group 2, n = 10) times over a 2 week period. After training no changes were detected from baseline for body composition, aerobic capacity, glucose metabolism or inflammatory profile ( p > 0.05) in either group. Both 6 and 4 sessions of HIIT performed over a 2-week period are ineffective in improving selected health markers within an overweight and obese cohort. This trial reports data from human participants and was retrospectively registered on 22/02/2017 with the ISRCTN registry, trial number ISRCTN90672085.
Performance of a thirty-two year old concrete pavement
DOT National Transportation Integrated Search
1996-01-01
This report reviews pavement performance testing results on an experimental concrete pavement built on Minnesota T.H. 36 in 1958 that contains variations in joint spacing, reinforcement, dowels, and transverse joint fillers. South Dakota Profile Serv...
Programming with BIG data in R: Scaling analytics from one to thousands of nodes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schmidt, Drew; Chen, Wei -Chen; Matheson, Michael A.
Here, we present a tutorial overview showing how one can achieve scalable performance with R. We do so by utilizing several package extensions, including those from the pbdR project. These packages consist of high performance, high-level interfaces to and extensions of MPI, PBLAS, ScaLAPACK, I/O libraries, profiling libraries, and more. While these libraries shine brightest on large distributed platforms, they also work rather well on small clusters and often, surprisingly, even on a laptop with only two cores. Our tutorial begins with recommendations on how to get more performance out of your R code before considering parallel implementations. Because Rmore » is a high-level language, a function can have a deep hierarchy of operations. For big data, this can easily lead to inefficiency. Profiling is an important tool to understand the performance of an R code for both serial and parallel improvements.« less
An improved computer model for prediction of axial gas turbine performance losses
NASA Technical Reports Server (NTRS)
Jenkins, R. M.
1984-01-01
The calculation model performs a rapid preliminary pitchline optimization of axial gas turbine annular flowpath geometry, as well as an initial estimate of blade profile shapes, given only a minimum of thermodynamic cycle requirements. No geometric parameters need be specified. The following preliminary design data are determined: (1) the optimum flowpath geometry, within mechanical stress limits; (2) initial estimates of cascade blade shapes; and (3) predictions of expected turbine performance. The model uses an inverse calculation technique whereby blade profiles are generated by designing channels to yield a specified velocity distribution on the two walls. Velocity distributions are then used to calculate the cascade loss parameters. Calculated blade shapes are used primarily to determine whether the assumed velocity loadings are physically realistic. Model verification is accomplished by comparison of predicted turbine geometry and performance with an array of seven NASA single-stage axial gas turbine configurations.
Martinez, Dani; Teixidó, Mercè; Font, Davinia; Moreno, Javier; Tresanchez, Marcel; Marco, Santiago; Palacín, Jordi
2014-03-27
This paper proposes the use of an autonomous assistant mobile robot in order to monitor the environmental conditions of a large indoor area and develop an ambient intelligence application. The mobile robot uses single high performance embedded sensors in order to collect and geo-reference environmental information such as ambient temperature, air velocity and orientation and gas concentration. The data collected with the assistant mobile robot is analyzed in order to detect unusual measurements or discrepancies and develop focused corrective ambient actions. This paper shows an example of the measurements performed in a research facility which have enabled the detection and location of an uncomfortable temperature profile inside an office of the research facility. The ambient intelligent application has been developed by performing some localized ambient measurements that have been analyzed in order to propose some ambient actuations to correct the uncomfortable temperature profile.
Martinez, Dani; Teixidó, Mercè; Font, Davinia; Moreno, Javier; Tresanchez, Marcel; Marco, Santiago; Palacín, Jordi
2014-01-01
This paper proposes the use of an autonomous assistant mobile robot in order to monitor the environmental conditions of a large indoor area and develop an ambient intelligence application. The mobile robot uses single high performance embedded sensors in order to collect and geo-reference environmental information such as ambient temperature, air velocity and orientation and gas concentration. The data collected with the assistant mobile robot is analyzed in order to detect unusual measurements or discrepancies and develop focused corrective ambient actions. This paper shows an example of the measurements performed in a research facility which have enabled the detection and location of an uncomfortable temperature profile inside an office of the research facility. The ambient intelligent application has been developed by performing some localized ambient measurements that have been analyzed in order to propose some ambient actuations to correct the uncomfortable temperature profile. PMID:24681671
Thermodynamic performance testing of the orbiter flash evaporator system
NASA Technical Reports Server (NTRS)
Jaax, J. R.; Melgares, M. A.; Frahm, J. P.
1980-01-01
System level testing of the space shuttle orbiter's development flash evaporator system (FES) was performed in a thermal vacuum chamber capable of simulating ambient ascent, orbital, and entry temperature and pressure profiles. The test article included the evaporator assembly, high load and topping exhaust duct and nozzle assemblies, and feedwater supply assembly. Steady state and transient heat load, water pressure/temperature and ambient pressure/temperature profiles were imposed by especially designed supporting test hardware. Testing in 1978 verified evaporator and duct heater thermal design, determined FES performance boundaries, and assessed topping evaporator plume characteristics. Testing in 1979 combined the FES with the other systems in the orbiter active thermal control subsystem (ATCS). The FES met or exceeded all nominal and contingency performance requirements during operation with the integrated ATCS. During both tests stability problems were encountered during steady state operations which resulted in subsequent design changes to the water spray nozzle and valve plate assemblies.
Programming with BIG data in R: Scaling analytics from one to thousands of nodes
Schmidt, Drew; Chen, Wei -Chen; Matheson, Michael A.; ...
2016-11-09
Here, we present a tutorial overview showing how one can achieve scalable performance with R. We do so by utilizing several package extensions, including those from the pbdR project. These packages consist of high performance, high-level interfaces to and extensions of MPI, PBLAS, ScaLAPACK, I/O libraries, profiling libraries, and more. While these libraries shine brightest on large distributed platforms, they also work rather well on small clusters and often, surprisingly, even on a laptop with only two cores. Our tutorial begins with recommendations on how to get more performance out of your R code before considering parallel implementations. Because Rmore » is a high-level language, a function can have a deep hierarchy of operations. For big data, this can easily lead to inefficiency. Profiling is an important tool to understand the performance of an R code for both serial and parallel improvements.« less
Unmasking molecular profiles of bladder cancer.
Piao, Xuan-Mei; Byun, Young Joon; Kim, Wun-Jae; Kim, Jayoung
2018-03-01
Precision medicine is designed to tailor treatments for individual patients by factoring in each person's specific biology and mechanism of disease. This paradigm shifted from a "one size fits all" approach to "personalized and precision care" requires multiple layers of molecular profiling of biomarkers for accurate diagnosis and prediction of treatment responses. Intensive studies are also being performed to understand the complex and dynamic molecular profiles of bladder cancer. These efforts involve looking bladder cancer mechanism at the multiple levels of the genome, epigenome, transcriptome, proteome, lipidome, metabolome etc. The aim of this short review is to outline the current technologies being used to investigate molecular profiles and discuss biomarker candidates that have been investigated as possible diagnostic and prognostic indicators of bladder cancer.
USDA-ARS?s Scientific Manuscript database
Rose is one of the most important cut flowers among ornamental plants. Rose flower longevity is largely dependent on the timing of petal shedding occurrence. To understand the molecular mechanism underlying petal abscission in rose, we performed transcriptome profiling of the petal abscission zone d...
ERIC Educational Resources Information Center
Elpus, Kenneth
2015-01-01
The purpose of this study was to analyze the demographic profile of candidates seeking music teacher licensure in the United States and to understand whether performance on the Praxis II music teacher licensure tests varies systematically as a function of various demographic characteristics. Praxis II music test data and background questionnaire…
Development of a Software-Defined Radar
2017-10-01
waveform to the widest available (unoccupied) instantaneous bandwidth in real time. Consequently, the radar range resolution and target detection are...LabVIEW The matched filter range profile is calculated in real time using fast Fourier transform (FFT) operations to perform a cross-correlation...between the transmitted waveform and the received complex data. Figure 4 demonstrates the block logic used to achieve real -time range profile
Reading Performance Profile of Children with Dyslexia in Primary and Secondary School Students
ERIC Educational Resources Information Center
Balci, Emine; Çayir, Aybala
2018-01-01
The purpose of the present research was to provide information to the community about the reading subskill profiles of children with dyslexia in primary and secondary school students. 175 children (aged 7-15 yrs) were examined on a varied set of phonological coding, spelling and fluent reading tasks. For this purpose, students' fluent reading were…
Human Mars Mission Performance Crew Taxi Profile
NASA Technical Reports Server (NTRS)
Duaro, Vince A.
1999-01-01
Using the results from Integrated Mission Program (IMP), a simulation language and code used to model present and future Earth Moon, or Mars missions, this report presents six different case studies of a manned Mars mission. The mission profiles, timelines, propellant requirements, feasibility and perturbation analysis is presented for two aborted, two delayed rendezvous, and two normal rendezvous cases for a future Mars mission.
ERIC Educational Resources Information Center
Douglas, Scott Roy
2015-01-01
Independent confirmation that vocabulary in use unfolds across levels of performance as expected can contribute to a more complete understanding of validity in standardized English language tests. This study examined the relationship between Lexical Frequency Profiling (LFP) measures and rater judgements of test-takers' overall levels of…
ERIC Educational Resources Information Center
Khan, Zamirullah; ahmed, Naseem; Raja, Waseem Hassan
2016-01-01
The purpose of this study was to find out kinanthropometric profile of 20 Athletes of middle distance 800 meters, & long distance runners 5000 meters of Track Event of age 17 years were assessed for the present study. The data of athletes was collected at Athletics Summer Camp 2015 in Kashmir region. The athletes having participation of at…
Random-Profiles-Based 3D Face Recognition System
Joongrock, Kim; Sunjin, Yu; Sangyoun, Lee
2014-01-01
In this paper, a noble nonintrusive three-dimensional (3D) face modeling system for random-profile-based 3D face recognition is presented. Although recent two-dimensional (2D) face recognition systems can achieve a reliable recognition rate under certain conditions, their performance is limited by internal and external changes, such as illumination and pose variation. To address these issues, 3D face recognition, which uses 3D face data, has recently received much attention. However, the performance of 3D face recognition highly depends on the precision of acquired 3D face data, while also requiring more computational power and storage capacity than 2D face recognition systems. In this paper, we present a developed nonintrusive 3D face modeling system composed of a stereo vision system and an invisible near-infrared line laser, which can be directly applied to profile-based 3D face recognition. We further propose a novel random-profile-based 3D face recognition method that is memory-efficient and pose-invariant. The experimental results demonstrate that the reconstructed 3D face data consists of more than 50 k 3D point clouds and a reliable recognition rate against pose variation. PMID:24691101
Caruso, Paola; Biosca, Elena G; Bertolini, Edson; Marco-Noales, Ester; Gorris, María Teresa; Licciardello, Concetta; López, María M
2017-12-01
The characterization and intraspecific diversity of a collection of 45 Ralstonia solanacearum strains isolated in Spain from different sources and geographical origins is reported. To test the influence of the site and the host on strain diversity, phenotypic and genotypic analysis were performed by a polyphasic approach. Biochemical and metabolic profiles were compared. Serological relationship was evaluated by Indirect-ELISA using polyclonal and monoclonal antibodies. For genotypic analysis, hrpB and egl DNA sequence analysis, repetitive sequences (rep-PCR), amplified fragment length polymorphism (AFLP) profiles and macrorestriction with XbaI followed by pulsed field gel electrophoresis (PFGE) were performed. The biochemical and metabolic characterization, serological tests, rep-PCR typing and phylogenetic analysis showed that all analysed strains belonged to phylotype II sequevar 1 and shared homogeneous profiles. However, interesting differences among strains were found by AFLP and macrorestriction with XbaI followed by PFGE techniques, some profiles being related to the geographical origin of the strains. Diversity results obtained offer new insights into the biogeography of this quarantine organism and its possible sources and reservoirs in Spain and Mediterranean countries. Copyright© by the Spanish Society for Microbiology and Institute for Catalan Studies.
NASA Astrophysics Data System (ADS)
Wang, Hexiang; Schuster, Eugenio; Rafiq, Tariq; Kritz, Arnold; Ding, Siye
2016-10-01
Extensive research has been conducted to find high-performance operating scenarios characterized by high fusion gain, good confinement, plasma stability and possible steady-state operation. A key plasma property that is related to both the stability and performance of these advanced plasma scenarios is the safety factor profile. A key component of the EAST research program is the exploration of non-inductively driven steady-state plasmas with the recently upgraded heating and current drive capabilities that include lower hybrid current drive and neutral beam injection. Anticipating the need for tight regulation of the safety factor profile in these plasma scenarios, a first-principles-driven (FPD)control-oriented model is proposed to describe the safety factor profile evolution in EAST in response to the different actuators. The TRANSP simulation code is employed to tailor the FPD model to the EAST tokamak geometry and to convert it into a form suitable for control design. The FPD control-oriented model's prediction capabilities are demonstrated by comparing predictions with experimental data from EAST. Supported by the US DOE under DE-SC0010537,DE-FG02-92ER54141 and DE-SC0013977.
microMS: A Python Platform for Image-Guided Mass Spectrometry Profiling
NASA Astrophysics Data System (ADS)
Comi, Troy J.; Neumann, Elizabeth K.; Do, Thanh D.; Sweedler, Jonathan V.
2017-09-01
Image-guided mass spectrometry (MS) profiling provides a facile framework for analyzing samples ranging from single cells to tissue sections. The fundamental workflow utilizes a whole-slide microscopy image to select targets of interest, determine their spatial locations, and subsequently perform MS analysis at those locations. Improving upon prior reported methodology, a software package was developed for working with microscopy images. microMS, for microscopy-guided mass spectrometry, allows the user to select and profile diverse samples using a variety of target patterns and mass analyzers. Written in Python, the program provides an intuitive graphical user interface to simplify image-guided MS for novice users. The class hierarchy of instrument interactions permits integration of new MS systems while retaining the feature-rich image analysis framework. microMS is a versatile platform for performing targeted profiling experiments using a series of mass spectrometers. The flexibility in mass analyzers greatly simplifies serial analyses of the same targets by different instruments. The current capabilities of microMS are presented, and its application for off-line analysis of single cells on three distinct instruments is demonstrated. The software has been made freely available for research purposes. [Figure not available: see fulltext.
microMS: A Python Platform for Image-Guided Mass Spectrometry Profiling.
Comi, Troy J; Neumann, Elizabeth K; Do, Thanh D; Sweedler, Jonathan V
2017-09-01
Image-guided mass spectrometry (MS) profiling provides a facile framework for analyzing samples ranging from single cells to tissue sections. The fundamental workflow utilizes a whole-slide microscopy image to select targets of interest, determine their spatial locations, and subsequently perform MS analysis at those locations. Improving upon prior reported methodology, a software package was developed for working with microscopy images. microMS, for microscopy-guided mass spectrometry, allows the user to select and profile diverse samples using a variety of target patterns and mass analyzers. Written in Python, the program provides an intuitive graphical user interface to simplify image-guided MS for novice users. The class hierarchy of instrument interactions permits integration of new MS systems while retaining the feature-rich image analysis framework. microMS is a versatile platform for performing targeted profiling experiments using a series of mass spectrometers. The flexibility in mass analyzers greatly simplifies serial analyses of the same targets by different instruments. The current capabilities of microMS are presented, and its application for off-line analysis of single cells on three distinct instruments is demonstrated. The software has been made freely available for research purposes. Graphical Abstract ᅟ.
The Internet profiles of men who have sex with men within bareback websites
Valera, Pamela; Ventuneac, Ana; Maynard, Emily; Carballo-Diéguez, Alex
2011-01-01
The Internet has become a venue for men who have sex with men (MSM) to search for sexual partners. Some of these men intentionally seek unprotected anal intercourse with other men (a.k.a., “bareback” sex). This paper focuses on the creation, use,and content of Internet personal profiles of MSM in the greater New York Citymetropolitan area whouse bareback sites for sexual networking. We used a mixed-methods approach to examine data from a cybercartography of Internet sites conducted during the first phase of the research (199 personal profiles), and from in-depth interviews conducted during its second phase (120 MSM who sought partners online for bareback sex). Results indicate that men generally followed offline stereotypical patterns in their online profiles. However, men who disclosed being HIV positive were more likely to include face and head pictures. Overall, the images they used were heavily sexualised in accordance with group norms perceived and reinforced by the websites’ design and imagery. Bottom-identified men tended to be more explicit in the exposition of their sexual and drug use interests online. This paper highlights how certain virtual and social performances play upon and reinforce other, in the flesh, performances. PMID:21815842
NASA Astrophysics Data System (ADS)
Liu, Cheng-Fang; Lin, Yan; Lai, Wen-Yong; Huang, Wei
2017-11-01
Inkjet printing is a promising technology for the scalable fabrication of organic electronics because of the material conservation and facile patterning as compared with other solution processing techniques. In this study, we have systematically investigated the cross-sectional profile control of silver (Ag) electrode via inkjet printing. A facile methodology for achieving inkjet-printed Ag source/drain with improved profiles is developed. It is demonstrated that the printing conditions such as substrate temperature, drop spacing and printing layers affect the magnitude of the droplet deposition and the rate of evaporation, which can be optimized to greatly reduce the coffee ring effects for improving the inkjet-printed electrode profiles. Ag source/drain electrodes with uniform profiles were successfully inkjet-printed and incorporated into organic thin-film transistors (OTFTs). The resulting devices showed superior electrical performance than those without special treatments. It is noted to mention that the strategy for modulating the inkjet-printed Ag electrodes in this work does not demand the ink formulation or complicated steps, which is beneficial for scaling up the printing techniques for potential large-area/mass manufacturing.
Suarez-Sharp, Sandra; Delvadia, Poonam R; Dorantes, Angelica; Duan, John; Externbrink, Anna; Gao, Zongming; Ghosh, Tapash; Miksinski, Sarah Pope; Seo, Paul
2016-05-01
Dissolution profile comparisons are used by the pharmaceutical industry to assess the similarity in the dissolution characteristics of two formulations to decide whether the implemented changes, usually minor/moderate in nature, will have an impact on the in vitro/in vivo performance of the drug product. When similarity testing is applied to support the approval of lower strengths of the same formulation, the traditional approach for dissolution profile comparison is not always applicable for drug products exhibiting strength-dependent dissolution and may lead to incorrect conclusions about product performance. The objective of this article is to describe reasonable biopharmaceutic approaches for developing a biowaiver strategy for low solubility, proportionally similar/non-proportionally similar in composition immediate release drug products that exhibit strength-dependent dissolution profiles. The paths highlighted in the article include (1) approaches to address biowaiver requests, such as the use of multi-unit dissolution testing to account for sink condition differences between the higher and lower strengths; (2) the use of a single- vs. strength-dependent dissolution method; and (3) the use of single- vs. strength-dependent dissolution acceptance criteria. These approaches are cost- and time-effective and can avoid unnecessary bioequivalence studies.
How to provide tailored career coaching for medical students.
Hur, Yera; Cho, A Ra; Kim, Sun
2015-03-01
This study was performed to develop a counseling strategy, based on the profiles of medical students' Strong Interest Inventory (STRONG) and Myer-Briggs Type Indicator (MBTI) results, focusing on the three following questions: Into what distinct levels are students categorized by STRONG and MBTI? and What is the dispersion of the integrated profiles? Freshmen students from Konyang University College of Medicine who matriculated between March 2011 and 2013 were administered the MBTI personality type test and the STRONG interest inventory assessment. The integrated profiles were categorized per Kim et al. (2006), and frequency analysis was performed with the collected data, using SPSS version 21.0. Regarding MBTI types, 16.9% of students were categorized as ESTJ, and 12.9% was ISTJ. Further, 62.4% of students were Investigative (I) according to STRONG. The integrated profiles were divided into four types, according to their unclear/clear preference in the STRONG and MBTI results. Most students had 'clear preference and clear interest' (n=144, 80.9%), six students (3.4%) had 'clear interest but unclear preference,' and 28 students (15.7%) showed 'unclear interest but clear preference.' Using the combined results of the STRONG interest inventory assessment and MBTI tools, we can purvey more tailored information to students.
Calculation of the non-inductive current profile in high-performance NSTX plasmas
NASA Astrophysics Data System (ADS)
Gerhardt, S. P.; Fredrickson, E.; Gates, D.; Kaye, S.; Menard, J.; Bell, M. G.; Bell, R. E.; Le Blanc, B. P.; Kugel, H.; Sabbagh, S. A.; Yuh, H.
2011-03-01
The constituents of the current profile have been computed for a wide range of high-performance plasmas in NSTX (Ono et al 2000 Nucl. Fusion 40 557); these include cases designed to maximize the non-inductive fraction, pulse length, toroidal-β or stored energy. In the absence of low-frequency MHD activity, good agreement is found between the reconstructed current profile and that predicted by summing the independently calculated inductive, pressure-driven and neutral beam currents, without the need to invoke any anomalous beam ion diffusion. Exceptions occur, for instance, when there are toroidal Alfvén eigenmode avalanches or coupled m/n = 1/1 + 2/1 kink-tearing modes. In these cases, the addition of a spatially and temporally dependent fast-ion diffusivity can reduce the core beam current drive, restoring agreement between the reconstructed profile and the summed constituents, as well as bringing better agreement between the simulated and measured neutron emission rate. An upper bound on the fast-ion diffusivity of ~0.5-1 m2 s-1 is found in 'MHD-free' discharges, based on the neutron emission, the time rate of change in the neutron signal when a neutral beam is stepped and reconstructed on-axis current density.