Software for Aerospace Education. A Bibliography (Second Edition).

ERIC Educational Resources Information Center

Vogt, Gregory L.; And Others

The software described in this bibliography represents programs made available to the National Aeronautics and Space Administration (NASA) Educational Technology Branch by software producers and vendors. More than 200 computer software programs and 12 laser videodisk programs are reviewed in terms of title, copyright, subject, application, type,…

Clay fractions from a soil chronosequence after glacier retreat reveal the initial evolution of organo-mineral associations

NASA Astrophysics Data System (ADS)

Dümig, Alexander; Häusler, Werner; Steffens, Markus; Kögel-Knabner, Ingrid

2012-05-01

Interactions between organic and mineral constituents prolong the residence time of organic matter in soils. However, the structural organization and mechanisms of organic coverage on mineral surfaces as well as their development with time are still unclear. We used clay fractions from a soil chronosequence (15, 75 and 120 years) in the foreland of the retreating Damma glacier (Switzerland) and from mature soils outside the proglacial area (>700 and <3000 years) to elucidate the evolution of organo-mineral associations during initial soil formation. The chemical composition of the clay-bound organic matter (OM) was assessed by solid-state 13C NMR spectroscopy while the quantities of amino acids and neutral sugar monomers were determined after acid hydrolysis. The mineral phase was characterized by X-ray diffraction, oxalate extraction, specific surface area by N2 adsorption (BET approach), and cation exchange capacity at pH 7 (CECpH7). The last two methods were applied before and after H2O2 treatment. We found pronounced shifts in quantity and quality of OM during aging of the clay fractions, especially within the first one hundred years of soil formation. The strongly increasing organic carbon (OC) loading of clay-sized particles resulted in decreasing specific surface areas (SSA) of the mineral phases and increasing CECpH7. Thus, OC accumulation was faster than the supply of mineral surfaces and cation exchange capacity was mainly determined by the OC content. Clay-bound OC of the 15-year-old soils showed high proportions of carboxyl C and aromatic C. This may point to remnants of ancient OC which were inherited from the recently exposed glacial till. With increasing age (75 and 120 years), the relative proportions of carboxyl and aromatic C decreased. This was associated with increasing O-alkyl C proportions, whereas accumulation of alkyl C was mainly detected in clay fractions from the mature soils. These findings from solid-state 13C NMR spectroscopy are in line with the increasing amounts of microbial-derived carbohydrates with soil age. The large accumulation of proteins, which was comparable to those of carbohydrates, and the very low C/N ratios of H2O2-resistant OM indicated strong and preferential associations between proteinaceous compounds and mineral surfaces. In the acid soils, poorly crystalline Fe oxides were the main providers of mineral surface area and important for the stabilization of OM during aging of the clay fractions. This was indicated by (I) the strong correlations between oxalate soluble Fe and both, SSA of H2O2-treated clay fractions and OC content, and (II) the low formation of expandable clays due to small extents of mineral weathering. Our chronosequence approach provided new insights into the evolution of organo-mineral interactions in acid soils. The formation of organo-mineral associations started with the sorption of proteinaceous compounds and microbial-derived carbohydrates on mineral surfaces which were mainly provided by ferrihydrite. The sequential accumulation of different organic compounds and the large OC loadings point to multiple accretion of OM in distinct zones or layers during the initial evolution of clay fractions.

Software reliability experiments data analysis and investigation

NASA Technical Reports Server (NTRS)

Walker, J. Leslie; Caglayan, Alper K.

1991-01-01

The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

Using an architectural approach to integrate heterogeneous, distributed software components

NASA Technical Reports Server (NTRS)

Callahan, John R.; Purtilo, James M.

1995-01-01

Many computer programs cannot be easily integrated because their components are distributed and heterogeneous, i.e., they are implemented in diverse programming languages, use different data representation formats, or their runtime environments are incompatible. In many cases, programs are integrated by modifying their components or interposing mechanisms that handle communication and conversion tasks. For example, remote procedure call (RPC) helps integrate heterogeneous, distributed programs. When configuring such programs, however, mechanisms like RPC must be used explicitly by software developers in order to integrate collections of diverse components. Each collection may require a unique integration solution. This paper describes improvements to the concepts of software packaging and some of our experiences in constructing complex software systems from a wide variety of components in different execution environments. Software packaging is a process that automatically determines how to integrate a diverse collection of computer programs based on the types of components involved and the capabilities of available translators and adapters in an environment. Software packaging provides a context that relates such mechanisms to software integration processes and reduces the cost of configuring applications whose components are distributed or implemented in different programming languages. Our software packaging tool subsumes traditional integration tools like UNIX make by providing a rule-based approach to software integration that is independent of execution environments.

The Software Line-up: What Reviewers Look for When Evaluating Software.

ERIC Educational Resources Information Center

ELECTRONIC Learning, 1982

1982-01-01

Contains a check list to aid teachers in evaluating software used in computer-assisted instruction on microcomputers. The evaluation form contains three sections: program description, program evaluation, and overall evaluation. A brief description of a software evaluation program in use at the Granite School District in Utah is included. (JJD)

Estimating Software Effort Hours for Major Defense Acquisition Programs

ERIC Educational Resources Information Center

Wallshein, Corinne C.

2010-01-01

Software Cost Estimation (SCE) uses labor hours or effort required to conceptualize, develop, integrate, test, field, or maintain program components. Department of Defense (DoD) SCE can use initial software data parameters to project effort hours for large, software-intensive programs for contractors reporting the top levels of process maturity,…

Classification software technique assessment

NASA Technical Reports Server (NTRS)

Jayroe, R. R., Jr.; Atkinson, R.; Dasarathy, B. V.; Lybanon, M.; Ramapryian, H. K.

1976-01-01

A catalog of software options is presented for the use of local user communities to obtain software for analyzing remotely sensed multispectral imagery. The resources required to utilize a particular software program are described. Descriptions of how a particular program analyzes data and the performance of that program for an application and data set provided by the user are shown. An effort is made to establish a statistical performance base for various software programs with regard to different data sets and analysis applications, to determine the status of the state-of-the-art.

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

Evaluating Math Drill and Practice Programs.

ERIC Educational Resources Information Center

Schnorr, Janice M.; Semmel, Dorothy S.

1986-01-01

General guidelines for a process evaluation of software for a specific subject and grade include: (1) Specify instructional objectives and list desired software program characteristics; (2) Access and review descriptions of programs (information sources for math programs are listed); (3) Preview software; and (4) Compare and make purchase…

The Role and Quality of Software Safety in the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

A progress report on a NASA research program for embedded computer systems software

NASA Technical Reports Server (NTRS)

Foudriat, E. C.; Senn, E. H.; Will, R. W.; Straeter, T. A.

1979-01-01

The paper presents the results of the second stage of the Multipurpose User-oriented Software Technology (MUST) program. Four primary areas of activities are discussed: programming environment, HAL/S higher-order programming language support, the Integrated Verification and Testing System (IVTS), and distributed system language research. The software development environment is provided by the interactive software invocation system. The higher-order programming language (HOL) support chosen for consideration is HAL/S mainly because at the time it was one of the few HOLs with flight computer experience and it is the language used on the Shuttle program. The overall purpose of IVTS is to provide a 'user-friendly' software testing system which is highly modular, user controlled, and cooperative in nature.

NASA software specification and evaluation system: Software verification/validation techniques

NASA Technical Reports Server (NTRS)

1977-01-01

NASA software requirement specifications were used in the development of a system for validating and verifying computer programs. The software specification and evaluation system (SSES) provides for the effective and efficient specification, implementation, and testing of computer software programs. The system as implemented will produce structured FORTRAN or ANSI FORTRAN programs, but the principles upon which SSES is designed allow it to be easily adapted to other high order languages.

Computers and Young Children. Storyboard Software: Flannel Boards in the Computer Age.

ERIC Educational Resources Information Center

Shade, Daniel D.

1995-01-01

Describes storyboard software as computer programs with which children can build a story using visuals. Notes the importance of such programs from preliterate or nonreading children. Describes a new storyboard program, "Wiggins in Storyland," and its features. Lists recommended storyboard software programs, with publishers and compatible…

Educational Software: A Developer's Perspective.

ERIC Educational Resources Information Center

Armstrong, Timothy C.; Loane, Russell F.

1994-01-01

Examines the current status and short-term future of computer software development in higher education. Topics discussed include educational advantages of software; current program development techniques, including object oriented programming; and market trends, including IBM versus Macintosh and multimedia programs. (LRW)

Software Piracy, Ethics, and the Academician.

ERIC Educational Resources Information Center

Bassler, Richard A.

The numerous software programs available for easy, low-cost copying raise ethical questions. The problem can be examined from the viewpoints of software users, teachers, authors, vendors, and distributors. Software users might hesitate to purchase or use software which prevents the making of back-up copies for program protection. Teachers in…

Learning to Write Programs with Others: Collaborative Quadruple Programming

ERIC Educational Resources Information Center

Arora, Ritu; Goel, Sanjay

2012-01-01

Most software development is carried out by teams of software engineers working collaboratively to achieve the desired goal. Consequently software development education not only needs to develop a student's ability to write programs that can be easily comprehended by others and be able to comprehend programs written by others, but also the ability…

Space Physics Data Facility Web Services

NASA Technical Reports Server (NTRS)

Candey, Robert M.; Harris, Bernard T.; Chimiak, Reine A.

2005-01-01

The Space Physics Data Facility (SPDF) Web services provides a distributed programming interface to a portion of the SPDF software. (A general description of Web services is available at http://www.w3.org/ and in many current software-engineering texts and articles focused on distributed programming.) The SPDF Web services distributed programming interface enables additional collaboration and integration of the SPDF software system with other software systems, in furtherance of the SPDF mission to lead collaborative efforts in the collection and utilization of space physics data and mathematical models. This programming interface conforms to all applicable Web services specifications of the World Wide Web Consortium. The interface is specified by a Web Services Description Language (WSDL) file. The SPDF Web services software consists of the following components: 1) A server program for implementation of the Web services; and 2) A software developer s kit that consists of a WSDL file, a less formal description of the interface, a Java class library (which further eases development of Java-based client software), and Java source code for an example client program that illustrates the use of the interface.

Test-driven programming

NASA Astrophysics Data System (ADS)

Georgiev, Bozhidar; Georgieva, Adriana

2013-12-01

In this paper, are presented some possibilities concerning the implementation of a test-driven development as a programming method. Here is offered a different point of view for creation of advanced programming techniques (build tests before programming source with all necessary software tools and modules respectively). Therefore, this nontraditional approach for easier programmer's work through building tests at first is preferable way of software development. This approach allows comparatively simple programming (applied with different object-oriented programming languages as for example JAVA, XML, PYTHON etc.). It is predictable way to develop software tools and to provide help about creating better software that is also easier to maintain. Test-driven programming is able to replace more complicated casual paradigms, used by many programmers.

Naming in a Programming Support Environment.

DTIC Science & Technology

1984-02-01

and Control, 1974. 10. T. E. Cheatham. An Overview of the Harvard Program Development System. I; Software Engineering Environments, H. Hunke, Ed.. North...Holland Publishing Compary, 1981, pp. 253-266. 11. T. E. Cheatham. Comparing Programming Support Environments. In Software Engineering Environments...Company. 1981. Third Edition 16. F. DeRemer and H Kron Programming -inthe Large Versus Programming -in-theSmall. IEEE Transactions on Software Engineering

Formal verification of mathematical software

NASA Technical Reports Server (NTRS)

Sutherland, D.

1984-01-01

Methods are investigated for formally specifying and verifying the correctness of mathematical software (software which uses floating point numbers and arithmetic). Previous work in the field was reviewed. A new model of floating point arithmetic called the asymptotic paradigm was developed and formalized. Two different conceptual approaches to program verification, the classical Verification Condition approach and the more recently developed Programming Logic approach, were adapted to use the asymptotic paradigm. These approaches were then used to verify several programs; the programs chosen were simplified versions of actual mathematical software.

Software For Computing Reliability Of Other Software

NASA Technical Reports Server (NTRS)

Nikora, Allen; Antczak, Thomas M.; Lyu, Michael

1995-01-01

Computer Aided Software Reliability Estimation (CASRE) computer program developed for use in measuring reliability of other software. Easier for non-specialists in reliability to use than many other currently available programs developed for same purpose. CASRE incorporates mathematical modeling capabilities of public-domain Statistical Modeling and Estimation of Reliability Functions for Software (SMERFS) computer program and runs in Windows software environment. Provides menu-driven command interface; enabling and disabling of menu options guides user through (1) selection of set of failure data, (2) execution of mathematical model, and (3) analysis of results from model. Written in C language.

Software and the future of programming languages.

PubMed

Aho, Alfred V

2004-02-27

Although software is the key enabler of the global information infrastructure, the amount and extent of software in use in the world today are not widely understood, nor are the programming languages and paradigms that have been used to create the software. The vast size of the embedded base of existing software and the increasing costs of software maintenance, poor security, and limited functionality are posing significant challenges for the software R&D community.

A Computerized Cataloging System for an Outdoor Program Library or Resource Center.

ERIC Educational Resources Information Center

Watters, Ron

The Outdoor Resource Library Cataloging System is a computer software program designed primarily for outdoor programs with small to medium-sized resource centers. The software is free to nonprofit organizations and is available from the Idaho State University Outdoor Program. The software is used to construct a database of library materials, which…

Implementation of density functional theory method on object-oriented programming (C++) to calculate energy band structure using the projector augmented wave (PAW)

NASA Astrophysics Data System (ADS)

Alfianto, E.; Rusydi, F.; Aisyah, N. D.; Fadilla, R. N.; Dipojono, H. K.; Martoprawiro, M. A.

2017-05-01

This study implemented DFT method into the C++ programming language with object-oriented programming rules (expressive software). The use of expressive software results in getting a simple programming structure, which is similar to mathematical formula. This will facilitate the scientific community to develop the software. We validate our software by calculating the energy band structure of Silica, Carbon, and Germanium with FCC structure using the Projector Augmented Wave (PAW) method then compare the results to Quantum Espresso calculation’s results. This study shows that the accuracy of the software is 85% compared to Quantum Espresso.

Interactive Programming Support for Secure Software Development

ERIC Educational Resources Information Center

Xie, Jing

2012-01-01

Software vulnerabilities originating from insecure code are one of the leading causes of security problems people face today. Unfortunately, many software developers have not been adequately trained in writing secure programs that are resistant from attacks violating program confidentiality, integrity, and availability, a style of programming…

Conjunctive programming: An interactive approach to software system synthesis

NASA Technical Reports Server (NTRS)

Tausworthe, Robert C.

1992-01-01

This report introduces a technique of software documentation called conjunctive programming and discusses its role in the development and maintenance of software systems. The report also describes the conjoin tool, an adjunct to assist practitioners. Aimed at supporting software reuse while conforming with conventional development practices, conjunctive programming is defined as the extraction, integration, and embellishment of pertinent information obtained directly from an existing database of software artifacts, such as specifications, source code, configuration data, link-edit scripts, utility files, and other relevant information, into a product that achieves desired levels of detail, content, and production quality. Conjunctive programs typically include automatically generated tables of contents, indexes, cross references, bibliographic citations, tables, and figures (including graphics and illustrations). This report presents an example of conjunctive programming by documenting the use and implementation of the conjoin program.

Free and open source software for the manipulation of digital images.

PubMed

Solomon, Robert W

2009-06-01

Free and open source software is a type of software that is nearly as powerful as commercial software but is freely downloadable. This software can do almost everything that the expensive programs can. GIMP (gnu image manipulation program) is the free program that is comparable to Photoshop, and versions are available for Windows, Macintosh, and Linux platforms. This article briefly describes how GIMP can be installed and used to manipulate radiology images. It is no longer necessary to budget large amounts of money for high-quality software to achieve the goals of image processing and document creation because free and open source software is available for the user to download at will.

Using software metrics and software reliability models to attain acceptable quality software for flight and ground support software for avionic systems

NASA Technical Reports Server (NTRS)

Lawrence, Stella

1992-01-01

This paper is concerned with methods of measuring and developing quality software. Reliable flight and ground support software is a highly important factor in the successful operation of the space shuttle program. Reliability is probably the most important of the characteristics inherent in the concept of 'software quality'. It is the probability of failure free operation of a computer program for a specified time and environment.

Software Engineering Laboratory (SEL) compendium of tools, revision 1

NASA Technical Reports Server (NTRS)

1982-01-01

A set of programs used to aid software product development is listed. Known as software tools, such programs include requirements analyzers, design languages, precompilers, code auditors, code analyzers, and software librarians. Abstracts, resource requirements, documentation, processing summaries, and availability are indicated for most tools.

A survey of program slicing for software engineering

NASA Technical Reports Server (NTRS)

Beck, Jon

1993-01-01

This research concerns program slicing which is used as a tool for program maintainence of software systems. Program slicing decreases the level of effort required to understand and maintain complex software systems. It was first designed as a debugging aid, but it has since been generalized into various tools and extended to include program comprehension, module cohesion estimation, requirements verification, dead code elimination, and maintainence of several software systems, including reverse engineering, parallelization, portability, and reuse component generation. This paper seeks to address and define terminology, theoretical concepts, program representation, different program graphs, developments in static slicing, dynamic slicing, and semantics and mathematical models. Applications for conventional slicing are presented, along with a prognosis of future work in this field.

Software-Realized Scaffolding to Facilitate Programming for Science Learning.

ERIC Educational Resources Information Center

Guzdial, Mark

1994-01-01

Discussion of the use of programming as a learning activity focuses on software-realized scaffolding. Emile, software that facilitates programming for modeling and simulation in physics, is described, and results of an evaluation of the use of Emile with high school students are reported. (Contains 95 references.) (LRW)

Software Quality Metrics: A Software Management Monitoring Method for Air Force Logistics Command in Its Software Quality Assurance Program for the Quantitative Assessment of the System Development Life Cycle under Configuration Management.

DTIC Science & Technology

1982-03-01

pilot systems. Magnitude of the mutant error is classified as: o Program does not compute. o Program computes but does not run test data. o Program...14 Test and Integration ... ............ .. 105 15 The Mapping of SQM to the SDLC ........ ... 108 16 ADS Development .... .............. . 224 17...and funds. While the test phase concludes the normal development cycle, one should realize that with software the development continues in the

Architecture of the software for LAMOST fiber positioning subsystem

NASA Astrophysics Data System (ADS)

Peng, Xiaobo; Xing, Xiaozheng; Hu, Hongzhuan; Zhai, Chao; Li, Weimin

2004-09-01

The architecture of the software which controls the LAMOST fiber positioning sub-system is described. The software is composed of two parts as follows: a main control program in a computer and a unit controller program in a MCS51 single chip microcomputer ROM. And the function of the software includes: Client/Server model establishment, observation planning, collision handling, data transmission, pulse generation, CCD control, image capture and processing, and data analysis etc. Particular attention is paid to the ways in which different parts of the software can communicate. Also software techniques for multi threads, SOCKET programming, Microsoft Windows message response, and serial communications are discussed.

Extreme Programming: Maestro Style

NASA Technical Reports Server (NTRS)

Norris, Jeffrey; Fox, Jason; Rabe, Kenneth; Shu, I-Hsiang; Powell, Mark

2009-01-01

"Extreme Programming: Maestro Style" is the name of a computer programming methodology that has evolved as a custom version of a methodology, called extreme programming that has been practiced in the software industry since the late 1990s. The name of this version reflects its origin in the work of the Maestro team at NASA's Jet Propulsion Laboratory that develops software for Mars exploration missions. Extreme programming is oriented toward agile development of software resting on values of simplicity, communication, testing, and aggressiveness. Extreme programming involves use of methods of rapidly building and disseminating institutional knowledge among members of a computer-programming team to give all the members a shared view that matches the view of the customers for whom the software system is to be developed. Extreme programming includes frequent planning by programmers in collaboration with customers, continually examining and rewriting code in striving for the simplest workable software designs, a system metaphor (basically, an abstraction of the system that provides easy-to-remember software-naming conventions and insight into the architecture of the system), programmers working in pairs, adherence to a set of coding standards, collaboration of customers and programmers, frequent verbal communication, frequent releases of software in small increments of development, repeated testing of the developmental software by both programmers and customers, and continuous interaction between the team and the customers. The environment in which the Maestro team works requires the team to quickly adapt to changing needs of its customers. In addition, the team cannot afford to accept unnecessary development risk. Extreme programming enables the Maestro team to remain agile and provide high-quality software and service to its customers. However, several factors in the Maestro environment have made it necessary to modify some of the conventional extreme-programming practices. The single most influential of these factors is that continuous interaction between customers and programmers is not feasible.

Semantic Metrics for Analysis of Software

NASA Technical Reports Server (NTRS)

Etzkorn, Letha H.; Cox, Glenn W.; Farrington, Phil; Utley, Dawn R.; Ghalston, Sampson; Stein, Cara

2005-01-01

A recently conceived suite of object-oriented software metrics focus is on semantic aspects of software, in contradistinction to traditional software metrics, which focus on syntactic aspects of software. Semantic metrics represent a more human-oriented view of software than do syntactic metrics. The semantic metrics of a given computer program are calculated by use of the output of a knowledge-based analysis of the program, and are substantially more representative of software quality and more readily comprehensible from a human perspective than are the syntactic metrics.

Exploratory research for the development of a computer aided software design environment with the software technology program

NASA Technical Reports Server (NTRS)

Hardwick, Charles

1991-01-01

Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

Program Helps Standardize Documentation Of Software

NASA Technical Reports Server (NTRS)

Howe, G.

1994-01-01

Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.

Ensemble: an Architecture for Mission-Operations Software

NASA Technical Reports Server (NTRS)

Norris, Jeffrey; Powell, Mark; Fox, Jason; Rabe, Kenneth; Shu, IHsiang; McCurdy, Michael; Vera, Alonso

2008-01-01

Ensemble is the name of an open architecture for, and a methodology for the development of, spacecraft mission operations software. Ensemble is also potentially applicable to the development of non-spacecraft mission-operations- type software. Ensemble capitalizes on the strengths of the open-source Eclipse software and its architecture to address several issues that have arisen repeatedly in the development of mission-operations software: Heretofore, mission-operations application programs have been developed in disparate programming environments and integrated during the final stages of development of missions. The programs have been poorly integrated, and it has been costly to develop, test, and deploy them. Users of each program have been forced to interact with several different graphical user interfaces (GUIs). Also, the strategy typically used in integrating the programs has yielded serial chains of operational software tools of such a nature that during use of a given tool, it has not been possible to gain access to the capabilities afforded by other tools. In contrast, the Ensemble approach offers a low-risk path towards tighter integration of mission-operations software tools.

Tools for Administration of a UNIX-Based Network

NASA Technical Reports Server (NTRS)

LeClaire, Stephen; Farrar, Edward

2004-01-01

Several computer programs have been developed to enable efficient administration of a large, heterogeneous, UNIX-based computing and communication network that includes a variety of computers connected to a variety of subnetworks. One program provides secure software tools for administrators to create, modify, lock, and delete accounts of specific users. This program also provides tools for users to change their UNIX passwords and log-in shells. These tools check for errors. Another program comprises a client and a server component that, together, provide a secure mechanism to create, modify, and query quota levels on a network file system (NFS) mounted by use of the VERITAS File SystemJ software. The client software resides on an internal secure computer with a secure Web interface; one can gain access to the client software from any authorized computer capable of running web-browser software. The server software resides on a UNIX computer configured with the VERITAS software system. Directories where VERITAS quotas are applied are NFS-mounted. Another program is a Web-based, client/server Internet Protocol (IP) address tool that facilitates maintenance lookup of information about IP addresses for a network of computers.

42 CFR 495.360 - Software and ownership rights.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 5 2012-10-01 2012-10-01 false Software and ownership rights. 495.360 Section 495... PROGRAM Requirements Specific to the Medicaid Program § 495.360 Software and ownership rights. (a) General... that the State or local government will have all ownership rights in software or modifications thereof...

42 CFR 495.360 - Software and ownership rights.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Software and ownership rights. 495.360 Section 495... PROGRAM Requirements Specific to the Medicaid Program § 495.360 Software and ownership rights. (a) General... that the State or local government will have all ownership rights in software or modifications thereof...

42 CFR 495.360 - Software and ownership rights.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Software and ownership rights. 495.360 Section 495... PROGRAM Requirements Specific to the Medicaid Program § 495.360 Software and ownership rights. (a) General... that the State or local government will have all ownership rights in software or modifications thereof...

42 CFR 495.360 - Software and ownership rights.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 5 2014-10-01 2014-10-01 false Software and ownership rights. 495.360 Section 495... PROGRAM Requirements Specific to the Medicaid Program § 495.360 Software and ownership rights. (a) General... that the State or local government will have all ownership rights in software or modifications thereof...

Office Computer Software: A Comprehensive Review of Software Programs.

ERIC Educational Resources Information Center

Secretary, 1992

1992-01-01

Describes types of software including system software, application software, spreadsheets, accounting software, graphics packages, desktop publishing software, database, desktop and personal information management software, project and records management software, groupware, and shareware. (JOW)

A Novel Approach for Collaborative Pair Programming

ERIC Educational Resources Information Center

Goel, Sanjay; Kathuria, Vanshi

2010-01-01

The majority of an engineer's time in the software industry is spent working with other programmers. Agile methods of software development like eXtreme Programming strongly rely upon practices like daily meetings and pair programming. Hence, the need to learn the skill of working collaboratively is of primary importance for software developers.…

Is Software Available for Early Childhood Spanish Speaking Children?

ERIC Educational Resources Information Center

Cardona de Divale, Maria Victoria

A search was conducted on the Internet for software available for bilingual Spanish-speaking children. The only programs found under this heading were 18 programs for learning Spanish. Five of the least expensive were selected for review using a standardized scale for evaluating children's software. Four of the programs were found to be…

Software Measurement Guidebook

NASA Technical Reports Server (NTRS)

1995-01-01

This Software Measurement Guidebook is based on the extensive experience of several organizations that have each developed and applied significant measurement programs over a period of at least 10 years. The lessons derived from those experiences reflect not only successes but also failures. By applying those lessons, an organization can minimize, or at least reduce, the time, effort, and frustration of introducing a software measurement program. The Software Measurement Guidebook is aimed at helping organizations to begin or improve a measurement program. It does not provide guidance for the extensive application of specific measures (such as how to estimate software cost or analyze software complexity) other than by providing examples to clarify points. It does contain advice for establishing and using an effective software measurement program and for understanding some of the key lessons that other organizations have learned. Some of that advice will appear counterintuitive, but it is all based on actual experience. Although all of the information presented in this guidebook is derived from specific experiences of mature measurement programs, the reader must keep in mind that the characteristics of every organization are unique. Some degree of measurement is critical for all software development and maintenance organizations, and most of the key rules captured in this report will be generally applicable. Nevertheless, each organization must strive to understand its own environment so that the measurement program can be tailored to suit its characteristics and needs.

OAST Space Theme Workshop. Volume 3: Working group summary. 4: Software (E-4). A. Summary. B. Technology needs (form 1). C. Priority assessment (form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

Only a few efforts are currently underway to develop an adequate technology base for the various themes. Particular attention must be given to software commonality and evolutionary capability, to increased system integrity and autonomy; and to improved communications among the program users, the program developers, and the programs themselves. There is a need for quantum improvement in software development methods and increasing the awareness of software by all concerned. Major thrusts identified include: (1) data and systems management; (2) software technology for autonomous systems; (3) technology and methods for improving the software development process; (4) advances related to systems of software elements including their architecture, their attributes as systems, and their interfaces with users and other systems; and (5) applications of software including both the basic algorithms used in a number of applications and the software specific to a particular theme or discipline area. The impact of each theme on software is assessed.

Software attribute visualization for high integrity software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-03-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

A Matrix Approach to Software Process Definition

NASA Technical Reports Server (NTRS)

Schultz, David; Bachman, Judith; Landis, Linda; Stark, Mike; Godfrey, Sally; Morisio, Maurizio; Powers, Edward I. (Technical Monitor)

2000-01-01

The Software Engineering Laboratory (SEL) is currently engaged in a Methodology and Metrics program for the Information Systems Center (ISC) at Goddard Space Flight Center (GSFC). This paper addresses the Methodology portion of the program. The purpose of the Methodology effort is to assist a software team lead in selecting and tailoring a software development or maintenance process for a specific GSFC project. It is intended that this process will also be compliant with both ISO 9001 and the Software Engineering Institute's Capability Maturity Model (CMM). Under the Methodology program, we have defined four standard ISO-compliant software processes for the ISC, and three tailoring criteria that team leads can use to categorize their projects. The team lead would select a process and appropriate tailoring factors, from which a software process tailored to the specific project could be generated. Our objective in the Methodology program is to present software process information in a structured fashion, to make it easy for a team lead to characterize the type of software engineering to be performed, and to apply tailoring parameters to search for an appropriate software process description. This will enable the team lead to follow a proven, effective software process and also satisfy NASA's requirement for compliance with ISO 9001 and the anticipated requirement for CMM assessment. This work is also intended to support the deployment of sound software processes across the ISC.

DSN system performance test software

NASA Technical Reports Server (NTRS)

Martin, M.

1978-01-01

The system performance test software is currently being modified to include additional capabilities and enhancements. Additional software programs are currently being developed for the Command Store and Forward System and the Automatic Total Recall System. The test executive is the main program. It controls the input and output of the individual test programs by routing data blocks and operator directives to those programs. It also processes data block dump requests from the operator.

Man-rated flight software for the F-8 DFBW program

NASA Technical Reports Server (NTRS)

Bairnsfather, R. R.

1976-01-01

The design, implementation, and verification of the flight control software used in the F-8 DFBW program are discussed. Since the DFBW utilizes an Apollo computer and hardware, the procedures, controls, and basic management techniques employed are based on those developed for the Apollo software system. Program assembly control, simulator configuration control, erasable-memory load generation, change procedures and anomaly reporting are discussed. The primary verification tools are described, as well as the program test plans and their implementation on the various simulators. Failure effects analysis and the creation of special failure generating software for testing purposes are described.

The Role of Data Analysis Software in Graduate Programs in Education and Post-Graduate Research

ERIC Educational Resources Information Center

Harwell, Michael

2018-01-01

The importance of data analysis software in graduate programs in education and post-graduate educational research is self-evident. However the role of this software in facilitating supererogated statistical practice versus "cookbookery" is unclear. The need to rigorously document the role of data analysis software in students' graduate…

PREVAPORATION PERFORMANCE PREDICTION SOFTWARE

EPA Science Inventory

The Pervaporation, Performance, Prediction Software and Database (PPPS&D) computer software program is currently being developed within the USEPA, NRMRL. The purpose of the PPPS&D program is to educate and assist potential users in identifying opportunities for using pervaporati...

A Home Computer Primer.

ERIC Educational Resources Information Center

Stone, Antonia

1982-01-01

Provides general information on currently available microcomputers, computer programs (software), hardware requirements, software sources, costs, computer games, and programing. Includes a list of popular microcomputers, providing price category, model, list price, software (cassette, tape, disk), monitor specifications, amount of random access…

An Instructional Note on Linear Programming--A Pedagogically Sound Approach.

ERIC Educational Resources Information Center

Mitchell, Richard

1998-01-01

Discusses the place of linear programming in college curricula and the advantages of using linear-programming software. Lists important characteristics of computer software used in linear programming for more effective teaching and learning. (ASK)

Repository-Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

1992-01-01

Support of a software engineering program was provided in the following areas: client/customer liaison; research representation/outreach; and program support management. Additionally, a list of deliverables is presented.

Validation of a Quality Management Metric

DTIC Science & Technology

2000-09-01

quality management metric (QMM) was used to measure the performance of ten software managers on Department of Defense (DoD) software development programs. Informal verification and validation of the metric compared the QMM score to an overall program success score for the entire program and yielded positive correlation. The results of applying the QMM can be used to characterize the quality of software management and can serve as a template to improve software management performance. Future work includes further refining the QMM, applying the QMM scores to provide feedback

An Evaluation of the Availability and Application of Microcomputer Software Programs for Use in Air Force Ground Transportation Squadrons

DTIC Science & Technology

1988-09-01

software programs capable of being used on a microcomputer will be considered for analysis. No software intended for use on a miniframe or mainframe...Dial-A-Log consists of a program written in a computer language called L-10 that is run on a DEC-20 miniframe . The combination of the specific...proliferation of software dealing with microcomputers. Instead, they were geared more towards managing the use of miniframe or mainframe computer

1986 Petroleum Software Directory. [800 mini, micro and mainframe computer software packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-01-01

Pennwell's 1986 Petroleum Software Directory is a complete listing of software created specifically for the petroleum industry. Details are provided on over 800 mini, micro and mainframe computer software packages from more than 250 different companies. An accountant can locate programs to automate bookkeeping functions in large oil and gas production firms. A pipeline engineer will find programs designed to calculate line flow and wellbore pressure drop.

Computer-Aided Software Engineering - An approach to real-time software development

NASA Technical Reports Server (NTRS)

Walker, Carrie K.; Turkovich, John J.

1989-01-01

A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

Space Station: NASA's software development approach increases safety and cost risks. Report to the Chairman, Committee on Science, Space, and Technology, House of Representatives

NASA Astrophysics Data System (ADS)

1992-06-01

The House Committee on Science, Space, and Technology asked NASA to study software development issues for the space station. How well NASA has implemented key software engineering practices for the station was asked. Specifically, the objectives were to determine: (1) if independent verification and validation techniques are being used to ensure that critical software meets specified requirements and functions; (2) if NASA has incorporated software risk management techniques into program; (3) whether standards are in place that will prescribe a disciplined, uniform approach to software development; and (4) if software support tools will help, as intended, to maximize efficiency in developing and maintaining the software. To meet the objectives, NASA proceeded: (1) reviewing and analyzing software development objectives and strategies contained in NASA conference publications; (2) reviewing and analyzing NASA, other government, and industry guidelines for establishing good software development practices; (3) reviewing and analyzing technical proposals and contracts; (4) reviewing and analyzing software management plans, risk management plans, and program requirements; (4) reviewing and analyzing reports prepared by NASA and contractor officials that identified key issues and challenges facing the program; (5) obtaining expert opinions on what constitutes appropriate independent V-and-V and software risk management activities; (6) interviewing program officials at NASA headquarters in Washington, DC; at the Space Station Program Office in Reston, Virginia; and at the three work package centers; Johnson in Houston, Texas; Marshall in Huntsville, Alabama; and Lewis in Cleveland, Ohio; and (7) interviewing contractor officials doing work for NASA at Johnson and Marshall. The audit work was performed in accordance with generally accepted government auditing standards, between April 1991 and May 1992.

Man-rated flight software for the F-8 DFBW program

NASA Technical Reports Server (NTRS)

Bairnsfather, R. R.

1975-01-01

The design, implementation, and verification of the flight control software used in the F-8 DFBW program are discussed. Since the DFBW utilizes an Apollo computer and hardware, the procedures, controls, and basic management techniques employed are based on those developed for the Apollo software system. Program Assembly Control, simulator configuration control, erasable-memory load generation, change procedures and anomaly reporting are discussed. The primary verification tools--the all-digital simulator, the hybrid simulator, and the Iron Bird simulator--are described, as well as the program test plans and their implementation on the various simulators. Failure-effects analysis and the creation of special failure-generating software for testing purposes are described. The quality of the end product is evidenced by the F-8 DFBW flight test program in which 42 flights, totaling 58 hours of flight time, were successfully made without any DFCS inflight software, or hardware, failures.

Automated Data Abstraction of Cardiopulmonary Resuscitation Process Measures for Complete Episodes of Cardiac Arrest Resuscitation.

PubMed

Lin, Steve; Turgulov, Anuar; Taher, Ahmed; Buick, Jason E; Byers, Adam; Drennan, Ian R; Hu, Samantha; J Morrison, Laurie

2016-10-01

Cardiopulmonary resuscitation (CPR) process measures research and quality assurance has traditionally been limited to the first 5 minutes of resuscitation due to significant costs in time, resources, and personnel from manual data abstraction. CPR performance may change over time during prolonged resuscitations, which represents a significant knowledge gap. Moreover, currently available commercial software output of CPR process measures are difficult to analyze. The objective was to develop and validate a software program to help automate the abstraction and transfer of CPR process measures data from electronic defibrillators for complete episodes of cardiac arrest resuscitation. We developed a software program to facilitate and help automate CPR data abstraction and transfer from electronic defibrillators for entire resuscitation episodes. Using an intermediary Extensible Markup Language export file, the automated software transfers CPR process measures data (electrocardiogram [ECG] number, CPR start time, number of ventilations, number of chest compressions, compression rate per minute, compression depth per minute, compression fraction, and end-tidal CO 2 per minute). We performed an internal validation of the software program on 50 randomly selected cardiac arrest cases with resuscitation durations between 15 and 60 minutes. CPR process measures were manually abstracted and transferred independently by two trained data abstractors and by the automated software program, followed by manual interpretation of raw ECG tracings, treatment interventions, and patient events. Error rates and the time needed for data abstraction, transfer, and interpretation were measured for both manual and automated methods, compared to an additional independent reviewer. A total of 9,826 data points were each abstracted by the two abstractors and by the software program. Manual data abstraction resulted in a total of six errors (0.06%) compared to zero errors by the software program. The mean ± SD time measured per case for manual data abstraction was 20.3 ± 2.7 minutes compared to 5.3 ± 1.4 minutes using the software program (p = 0.003). We developed and validated an automated software program that efficiently abstracts and transfers CPR process measures data from electronic defibrillators for complete cardiac arrest episodes. This software will enable future cardiac arrest studies and quality assurance programs to evaluate the impact of CPR process measures during prolonged resuscitations. © 2016 by the Society for Academic Emergency Medicine.

Automatic programming for critical applications

NASA Technical Reports Server (NTRS)

Loganantharaj, Raj L.

1988-01-01

The important phases of a software life cycle include verification and maintenance. Usually, the execution performance is an expected requirement in a software development process. Unfortunately, the verification and the maintenance of programs are the time consuming and the frustrating aspects of software engineering. The verification cannot be waived for the programs used for critical applications such as, military, space, and nuclear plants. As a consequence, synthesis of programs from specifications, an alternative way of developing correct programs, is becoming popular. The definition, or what is understood by automatic programming, has been changed with our expectations. At present, the goal of automatic programming is the automation of programming process. Specifically, it means the application of artificial intelligence to software engineering in order to define techniques and create environments that help in the creation of high level programs. The automatic programming process may be divided into two phases: the problem acquisition phase and the program synthesis phase. In the problem acquisition phase, an informal specification of the problem is transformed into an unambiguous specification while in the program synthesis phase such a specification is further transformed into a concrete, executable program.

Learning Theories Applied to Teaching Technology: Constructivism versus Behavioral Theory for Instructing Multimedia Software Programs

ERIC Educational Resources Information Center

Reed, Cajah S.

2012-01-01

This study sought to find evidence for a beneficial learning theory to teach computer software programs. Additionally, software was analyzed for each learning theory's applicability to resolve whether certain software requires a specific method of education. The results are meant to give educators more effective teaching tools, so students…

Software Model Checking Without Source Code

NASA Technical Reports Server (NTRS)

Chaki, Sagar; Ivers, James

2009-01-01

We present a framework, called AIR, for verifying safety properties of assembly language programs via software model checking. AIR extends the applicability of predicate abstraction and counterexample guided abstraction refinement to the automated verification of low-level software. By working at the assembly level, AIR allows verification of programs for which source code is unavailable-such as legacy and COTS software-and programs that use features-such as pointers, structures, and object-orientation-that are problematic for source-level software verification tools. In addition, AIR makes no assumptions about the underlying compiler technology. We have implemented a prototype of AIR and present encouraging results on several non-trivial examples.

Software Requirements Engineering Methodology (Development)

DTIC Science & Technology

1979-06-01

Higher Order Software [20]; and the Michael Jackson Design Methodology [21]. Although structured programming constructs have proven to be more useful...reviewed here. Similarly, the manual techniques for software design (e.g., HIPO Diagrams, Nassi-Schneidermann charts, Top-Down Design, the Michael ... Jackson Design Methodology, Yourdon’s Structured Design) are not addressed. 6.1.3 Research Programs There are a number of research programs underway

Data analysis software for the autoradiographic enhancement process. Volumes 1, 2, and 3, and appendix

NASA Technical Reports Server (NTRS)

Singh, S. P.

1979-01-01

The computer software developed to set up a method for Wiener spectrum analysis of photographic films is presented. This method is used for the quantitative analysis of the autoradiographic enhancement process. The software requirements and design for the autoradiographic enhancement process are given along with the program listings and the users manual. A software description and program listings modification of the data analysis software are included.

In the right order of brush strokes: a sketch of a software philosophy retrospective.

PubMed

Pyshkin, Evgeny

2014-01-01

This paper follows a discourse on software recognized as a product of art and human creativity progressing probably for as long as software exists. A retrospective view on computer science and software philosophy development is introduced. In so doing we discover parallels between software and various branches of human creative manifestations. Aesthetic properties and mutual dependency of the form and matter of art works are examined in their application to software programs. While exploring some philosophical and even artistic reflection on software we consider extended comprehension of technical sciences of programming and software engineering within the realm of liberal arts.

Microcomputer Software for Libraries: A Survey.

ERIC Educational Resources Information Center

Nolan, Jeanne M.

1983-01-01

Reports on findings of research done by Nolan Information Management Services concerning availability of microcomputer software for libraries. Highlights include software categories (specific, generic-database management programs, original); number of programs available in 1982 for 12 applications; projections for 1983; and future software…

Software for the Humanities and Social Sciences.

ERIC Educational Resources Information Center

National Collegiate Software Clearinghouse, Raleigh, NC.

This computer software program bibliography available from the National Collegiate Software Clearinghouse (NCSC) includes programs for college students and researchers in anthropology, economics and business, education, English and text analysis, foreign language, general interest, history, management, philosophy and religion, political science,…

10 CFR 961.11 - Text of the contract.

Code of Federal Regulations, 2014 CFR

2014-01-01

... program including information on cost projections, project plans and progress reports. 5. (a) Beginning on...-type documents or computer software (including computer programs, computer software data bases, and computer software documentation). Examples of technical data include research and engineering data...

10 CFR 961.11 - Text of the contract.

Code of Federal Regulations, 2013 CFR

2013-01-01

... program including information on cost projections, project plans and progress reports. 5. (a) Beginning on...-type documents or computer software (including computer programs, computer software data bases, and computer software documentation). Examples of technical data include research and engineering data...

Statistical Software and Artificial Intelligence: A Watershed in Applications Programming.

ERIC Educational Resources Information Center

Pickett, John C.

1984-01-01

AUTOBJ and AUTOBOX are revolutionary software programs which contain the first application of artificial intelligence to statistical procedures used in analysis of time series data. The artificial intelligence included in the programs and program features are discussed. (JN)

Management of an affiliated Physics Residency Program using a commercial software tool.

PubMed

Zacarias, Albert S; Mills, Michael D

2010-06-01

A review of commercially available allied health educational management software tools was performed to evaluate their capacity to manage program data associated with a CAMPEP-accredited Therapy Physics Residency Program. Features of these software tools include: a) didactic course reporting and organization, b) competency reporting by topic, category and didactic course, c) student time management and accounting, and d) student patient case reporting by topic, category and course. The software package includes features for recording school administrative information; setting up lists of courses, faculty, clinical sites, categories, competencies, and time logs; and the inclusion of standardized external documents. There are provisions for developing evaluation and survey instruments. The mentors and program may be evaluated by residents, and residents may be evaluated by faculty members using this feature. Competency documentation includes the time spent on the problem or with the patient, time spent with the mentor, date of the competency, and approval by the mentor and program director. Course documentation includes course and lecture title, lecturer, topic information, date of lecture and approval by the Program Director. These software tools have the facility to include multiple clinical sites, with local subadministrators having the ability to approve competencies and attendance at clinical conferences. In total, these software tools have the capability of managing all components of a CAMPEP-accredited residency program. The application database lends the software to the support of multiple affiliated clinical sites within a single residency program. Such tools are a critical and necessary component if the medical physics profession is to meet the projected needs for qualified medical physicists in future years.

Reference management software for systematic reviews and meta-analyses: an exploration of usage and usability.

PubMed

Lorenzetti, Diane L; Ghali, William A

2013-11-15

Reference management software programs enable researchers to more easily organize and manage large volumes of references typically identified during the production of systematic reviews. The purpose of this study was to determine the extent to which authors are using reference management software to produce systematic reviews; identify which programs are used most frequently and rate their ease of use; and assess the degree to which software usage is documented in published studies. We reviewed the full text of systematic reviews published in core clinical journals indexed in ACP Journal Club from 2008 to November 2011 to determine the extent to which reference management software usage is reported in published reviews. We surveyed corresponding authors to verify and supplement information in published reports, and gather frequency and ease-of-use data on individual reference management programs. Of the 78 researchers who responded to our survey, 79.5% reported that they had used a reference management software package to prepare their review. Of these, 4.8% reported this usage in their published studies. EndNote, Reference Manager, and RefWorks were the programs of choice for more than 98% of authors who used this software. Comments with respect to ease-of-use issues focused on the integration of this software with other programs and computer interfaces, and the sharing of reference databases among researchers. Despite underreporting of use, reference management software is frequently adopted by authors of systematic reviews. The transparency, reproducibility and quality of systematic reviews may be enhanced through increased reporting of reference management software usage.

Modular Infrastructure for Rapid Flight Software Development

NASA Technical Reports Server (NTRS)

Pires, Craig

2010-01-01

This slide presentation reviews the use of modular infrastructure to assist in the development of flight software. A feature of this program is the use of model based approach for application unique software. A review of two programs that this approach was use on are: the development of software for Hover Test Vehicle (HTV), and Lunar Atmosphere and Dust Environment Experiment (LADEE).

Software Template for Instruction in Mathematics

NASA Technical Reports Server (NTRS)

Shelton, Robert O.; Moebes, Travis A.; Beall, Anna

2005-01-01

Intelligent Math Tutor (IMT) is a software system that serves as a template for creating software for teaching mathematics. IMT can be easily connected to artificial-intelligence software and other analysis software through input and output of files. IMT provides an easy-to-use interface for generating courses that include tests that contain both multiple-choice and fill-in-the-blank questions, and enables tracking of test scores. IMT makes it easy to generate software for Web-based courses or to manufacture compact disks containing executable course software. IMT also can function as a Web-based application program, with features that run quickly on the Web, while retaining the intelligence of a high-level language application program with many graphics. IMT can be used to write application programs in text, graphics, and/or sound, so that the programs can be tailored to the needs of most handicapped persons. The course software generated by IMT follows a "back to basics" approach of teaching mathematics by inducing the student to apply creative mathematical techniques in the process of learning. Students are thereby made to discover mathematical fundamentals and thereby come to understand mathematics more deeply than they could through simple memorization.

Space station: The role of software

NASA Technical Reports Server (NTRS)

Hall, D.

1985-01-01

Software will play a critical role throughout the Space Station Program. This presentation sets the stage and prompts participant interaction at the Software Issues Forum. The presentation is structured into three major topics: (1) an overview of the concept and status of the Space Station Program; (2) several charts designed to lay out the scope and role of software; and (3) information addressing the four specific areas selected for focus at the forum, specifically: software management, the software development environment, languages, and standards. NASA's current thinking is highlighted and some of the relevant critical issues are raised.

Concept Development for Software Health Management

NASA Technical Reports Server (NTRS)

Riecks, Jung; Storm, Walter; Hollingsworth, Mark

2011-01-01

This report documents the work performed by Lockheed Martin Aeronautics (LM Aero) under NASA contract NNL06AA08B, delivery order NNL07AB06T. The Concept Development for Software Health Management (CDSHM) program was a NASA funded effort sponsored by the Integrated Vehicle Health Management Project, one of the four pillars of the NASA Aviation Safety Program. The CD-SHM program focused on defining a structured approach to software health management (SHM) through the development of a comprehensive failure taxonomy that is used to characterize the fundamental failure modes of safety-critical software.

Software Implemented Fault-Tolerant (SIFT) user's guide

NASA Technical Reports Server (NTRS)

Green, D. F., Jr.; Palumbo, D. L.; Baltrus, D. W.

1984-01-01

Program development for a Software Implemented Fault Tolerant (SIFT) computer system is accomplished in the NASA LaRC AIRLAB facility using a DEC VAX-11 to interface with eight Bendix BDX 930 flight control processors. The interface software which provides this SIFT program development capability was developed by AIRLAB personnel. This technical memorandum describes the application and design of this software in detail, and is intended to assist both the user in performance of SIFT research and the systems programmer responsible for maintaining and/or upgrading the SIFT programming environment.

Language and Program for Documenting Software Design

NASA Technical Reports Server (NTRS)

Kleine, H.; Zepko, T. M.

1986-01-01

Software Design and Documentation Language (SDDL) provides effective communication medium to support design and documentation of complex software applications. SDDL supports communication among all members of software design team and provides for production of informative documentation on design effort. Use of SDDL-generated document to analyze design makes it possible to eliminate many errors not detected until coding and testing attempted. SDDL processor program translates designer's creative thinking into effective document for communication. Processor performs as many automatic functions as possible, freeing designer's energy for creative effort. SDDL processor program written in PASCAL.

Library-Specific Microcomputer Software.

ERIC Educational Resources Information Center

Levert, Virginia M.

1985-01-01

Discusses number and type of microcomputer software programs useful to libraries and types of hardware on which they run, as identified by Nolan Information Management Services. Highlights include general application programs, applications designed to support library technical processes, producers of library software, and choosing among options.…

Software and package applicating for network meta-analysis: A usage-based comparative study.

PubMed

Xu, Chang; Niu, Yuming; Wu, Junyi; Gu, Huiyun; Zhang, Chao

2017-12-21

To compare and analyze the characteristics and functions of software applications for network meta-analysis (NMA). PubMed, EMbase, The Cochrane Library, the official websites of Bayesian inference Using Gibbs Sampling (BUGS), Stata and R, and Google were searched to collect the software and packages for performing NMA; software and packages published up to March 2016 were included. After collecting the software, packages, and their user guides, we used the software and packages to calculate a typical example. All characteristics, functions, and computed results were compared and analyzed. Ten types of software were included, including programming and non-programming software. They were developed mainly based on Bayesian or frequentist theory. Most types of software have the characteristics of easy operation, easy mastery, exact calculation, or excellent graphing. However, there was no single software that performed accurate calculations with superior graphing; this could only be achieved through the combination of two or more types of software. This study suggests that the user should choose the appropriate software according to personal programming basis, operational habits, and financial ability. Then, the choice of the combination of BUGS and R (or Stata) software to perform the NMA is considered. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Environmental Health Monitor: Advanced Development of Temperature Sensor Suite.

DTIC Science & Technology

1995-07-30

systems was implemented using program code existing at Veritay. The software , written in Microsoft® QuickBASIC, facilitated program changes for...currently unforeseen reason re-calibration is needed, this can be readily * accommodated by a straightforward change in the software program---without...unit. A linear relationship between these differences * was obtained using curve fitting software . The ½/-inch globe to 6-inch globe correlation * was

Legacy Systems Upgrade for Software Risk Assessment

DTIC Science & Technology

2001-12-01

Nieto, T. R., Visual Basic 6: How to Program , Prentice Hall, Inc., 1999 Edson, David, Professional Development with Visio 2000: The...and the necessity for the program . Second, follow with a review of the enhancement algorithms and software extensions intended to add additional...taken prior to the programming . First, one must gain thorough understanding of the operation of VitéProject software and its interface with Visio

A toolbox for developing bioinformatics software

PubMed Central

Potrzebowski, Wojciech; Puton, Tomasz; Rother, Magdalena; Wywial, Ewa; Bujnicki, Janusz M.

2012-01-01

Creating useful software is a major activity of many scientists, including bioinformaticians. Nevertheless, software development in an academic setting is often unsystematic, which can lead to problems associated with maintenance and long-term availibility. Unfortunately, well-documented software development methodology is difficult to adopt, and technical measures that directly improve bioinformatic programming have not been described comprehensively. We have examined 22 software projects and have identified a set of practices for software development in an academic environment. We found them useful to plan a project, support the involvement of experts (e.g. experimentalists), and to promote higher quality and maintainability of the resulting programs. This article describes 12 techniques that facilitate a quick start into software engineering. We describe 3 of the 22 projects in detail and give many examples to illustrate the usage of particular techniques. We expect this toolbox to be useful for many bioinformatics programming projects and to the training of scientific programmers. PMID:21803787

Data-Driven Software Framework for Web-Based ISS Telescience

NASA Technical Reports Server (NTRS)

Tso, Kam S.

2005-01-01

Software that enables authorized users to monitor and control scientific payloads aboard the International Space Station (ISS) from diverse terrestrial locations equipped with Internet connections is undergoing development. This software reflects a data-driven approach to distributed operations. A Web-based software framework leverages prior developments in Java and Extensible Markup Language (XML) to create portable code and portable data, to which one can gain access via Web-browser software on almost any common computer. Open-source software is used extensively to minimize cost; the framework also accommodates enterprise-class server software to satisfy needs for high performance and security. To accommodate the diversity of ISS experiments and users, the framework emphasizes openness and extensibility. Users can take advantage of available viewer software to create their own client programs according to their particular preferences, and can upload these programs for custom processing of data, generation of views, and planning of experiments. The same software system, possibly augmented with a subset of data and additional software tools, could be used for public outreach by enabling public users to replay telescience experiments, conduct their experiments with simulated payloads, and create their own client programs and other custom software.

Spacelab software development and integration concepts study report. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

1973-01-01

Software considerations were developed for incorporation in the spacelab systems design, and include management concepts for top-down structured programming, composite designs for modular programs, and team management methods for production programming.

Software Review: Welcome to the World of Delta Drawing.

ERIC Educational Resources Information Center

King, Charles

1983-01-01

Provided is a review of an educational software program called "Delta Drawing." Included are comments on how the graphics program works, programing features, comparison with LOGO, educational value, and availability. Indicates that as a powerful learning program, it is innovative and imaginative. (JN)

Elementary Keyboarding Software Product Reports.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This report provides detailed product descriptions of 45 software programs designed to teach or improve the keyboarding skills of elementary school students that were identified by the MicroSIFT (Microcomputer Information and Software for Teachers) staff. The descriptions include program titles, producer names, costs, grade levels, hardware,…

Computer Software Reviews.

ERIC Educational Resources Information Center

Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

Intended to provide guidance in the selection of the best computer software available to support instruction and to make optimal use of schools' financial resources, this publication provides a listing of computer software programs that have been evaluated according to their currency, relevance, and value to Hawaii's educational programs. The…

Teaching Reprint File Management: Basic Principles and Software Programs.

ERIC Educational Resources Information Center

Wood, Elizabeth H.

1989-01-01

Describes a workshop for teaching library users how to manage reprint files which was developed at the University of Southern California Norris Medical Library. Software programs designed for this purpose are suggested, and a sidebar lists software features to consider. (eight references) (MES)

Dynamic visualization techniques for high consequence software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-02-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification. The prototype tool is described along with the requirements constraint language after a brief literature review is presented. Examples of howmore » the tool can be used are also presented. In conclusion, the most significant advantage of this tool is to provide a first step in evaluating specification completeness, and to provide a more productive method for program comprehension and debugging. The expected payoff is increased software surety confidence, increased program comprehension, and reduced development and debugging time.« less

Software reliability models for critical applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pham, H.; Pham, M.

This report presents the results of the first phase of the ongoing EG G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the secondmore » place. 407 refs., 4 figs., 2 tabs.« less

Software reliability models for critical applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pham, H.; Pham, M.

This report presents the results of the first phase of the ongoing EG&G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place.more » 407 refs., 4 figs., 2 tabs.« less

Preoperative Planning of Orthopedic Procedures using Digitalized Software Systems.

PubMed

Steinberg, Ely L; Segev, Eitan; Drexler, Michael; Ben-Tov, Tomer; Nimrod, Snir

2016-06-01

The progression from standard celluloid films to digitalized technology led to the development of new software programs to fulfill the needs of preoperative planning. We describe here preoperative digitalized programs and the variety of conditions for which those programs can be used to facilitate preparation for surgery. A PubMed search using the keywords "digitalized software programs," "preoperative planning" and "total joint arthroplasty" was performed for all studies regarding preoperative planning of orthopedic procedures that were published from 1989 to 2014 in English. Digitalized software programs are enabled to import and export all picture archiving communication system (PACS) files (i.e., X-rays, computerized tomograms, magnetic resonance images) from either the local working station or from any remote PACS. Two-dimension (2D) and 3D CT scans were found to be reliable tools with a high preoperative predicting accuracy for implants. The short learning curve, user-friendly features, accurate prediction of implant size, decreased implant stocks and low-cost maintenance makes digitalized software programs an attractive tool in preoperative planning of total joint replacement, fracture fixation, limb deformity repair and pediatric skeletal disorders.

Maintenance Manual for AUDIT. A System for Analyzing SESCOMP Software. Volume 4: Appendix D. Listings of the AUDIT Software for the IBM 360.

DTIC Science & Technology

1977-08-01

The AUDIT documentation provides the maintenance programmer personnel with the information to effectively maintain and use the AUDIT software. The ...SESCOMPSPEC’s) and produces reports detailing the deviations from those standards. The AUDIT software also examines a program unit to detect and report...changes in word length on the output of computer programs. This report contains the listings of the AUDIT software for the IBM 360. (Author)

Maintenance Manual for AUDIT. A System for Analyzing SESCOMP Software. Volume 3: Appendix C - Listings of the AUDIT Software for the UNIVAC 1108.

DTIC Science & Technology

1977-08-01

The AUDIT documentation provides the maintenance programmer personnel with the information to effectively maintain and use the AUDIT software. The ...SESCOMPSPEC’s) and produces reports detailing the deviations from those standards. The AUDIT software also examines a program unit to detect and report...changes in word length on the output of computer programs. This report contains the listings of the AUDIT software for the UNIVAC 1108. (Author)

Maintenance Manual for AUDIT. A System for Analyzing SESCOMP Software. Volume 2: Appendix B. Listings of the Audit Software for the CDC 6000.

DTIC Science & Technology

1977-08-01

The AUDIT documentation provides the maintenance programmer personnel with the information to effectively maintain and use the AUDIT software. The ...SESCOMPSPEC’s) and produces reports detailing the deviations from those standards. The AUDIT software also examines a program unit to detect and report...changes in word length on the output of computer programs. This report contains the listings of the AUDIT software for the CDC 6000. (Author)

The repository-based software engineering program: Redefining AdaNET as a mainstream NASA source

NASA Technical Reports Server (NTRS)

1993-01-01

The Repository-based Software Engineering Program (RBSE) is described to inform and update senior NASA managers about the program. Background and historical perspective on software reuse and RBSE for NASA managers who may not be familiar with these topics are provided. The paper draws upon and updates information from the RBSE Concept Document, baselined by NASA Headquarters, Johnson Space Center, and the University of Houston - Clear Lake in April 1992. Several of NASA's software problems and what RBSE is now doing to address those problems are described. Also, next steps to be taken to derive greater benefit from this Congressionally-mandated program are provided. The section on next steps describes the need to work closely with other NASA software quality, technology transfer, and reuse activities and focuses on goals and objectives relative to this need. RBSE's role within NASA is addressed; however, there is also the potential for systematic transfer of technology outside of NASA in later stages of the RBSE program. This technology transfer is discussed briefly.

Software analysis handbook: Software complexity analysis and software reliability estimation and prediction

NASA Technical Reports Server (NTRS)

Lee, Alice T.; Gunn, Todd; Pham, Tuan; Ricaldi, Ron

1994-01-01

This handbook documents the three software analysis processes the Space Station Software Analysis team uses to assess space station software, including their backgrounds, theories, tools, and analysis procedures. Potential applications of these analysis results are also presented. The first section describes how software complexity analysis provides quantitative information on code, such as code structure and risk areas, throughout the software life cycle. Software complexity analysis allows an analyst to understand the software structure, identify critical software components, assess risk areas within a software system, identify testing deficiencies, and recommend program improvements. Performing this type of analysis during the early design phases of software development can positively affect the process, and may prevent later, much larger, difficulties. The second section describes how software reliability estimation and prediction analysis, or software reliability, provides a quantitative means to measure the probability of failure-free operation of a computer program, and describes the two tools used by JSC to determine failure rates and design tradeoffs between reliability, costs, performance, and schedule.

Evaluation of drug interaction microcomputer software: comparative study.

PubMed

Poirier, T I; Giudici, R

1991-01-01

Twelve drug interaction microcomputer software programs were evaluated and compared using general and specific criteria. This article summarizes and compares the features, ratings, advantages, and disadvantages of each program. Features of an ideal drug interaction program are noted. Recommended programs based on three price ranges are suggested.

Software Maintenance of the Subway Environment Simulation Computer Program

DOT National Transportation Integrated Search

1980-12-01

This document summarizes the software maintenance activities performed to support the Subway Environment Simulation (SES) Computer Program. The SES computer program is a design-oriented analytic tool developed during a recent five-year research proje...

Development of an Environment for Software Reliability Model Selection

DTIC Science & Technology

1992-09-01

now is directed to other related problems such as tools for model selection, multiversion programming, and software fault tolerance modeling... multiversion programming, 7. Hlardware can be repaired by spare modules, which is not. the case for software, 2-6 N. Preventive maintenance is very important

SUNREL Related Links | Buildings | NREL

Science.gov Websites

SUNREL Related Links SUNREL Related Links DOE Simulation Software Tools Directory a directory of 301 building software tools for evaluation of energy efficiency, renewable energy, and sustainability in buildings. TREAT Software Program a computer program that uses SUNREL and is designed to provide

Prototyping with Data Dictionaries for Requirements Analysis.

DTIC Science & Technology

1985-03-01

statistical packages and software for screen layout. These items work at a higher level than another category of prototyping tool, program generators... Program generators are software packages which, when given specifications, produce source listings, usually in a high order language such as COBCL...with users and this will not happen if he must stop to develcp a detailed program . [Ref. 241] Hardware as well as software should be considered in

An Experimental Investigation of Computer Program Development Approaches and Computer Programming Metrics.

DTIC Science & Technology

1979-12-01

team progranming in reducing software dleveloup- ment costs relative to ad hoc approaches and improving software product quality relative to...are interpreted as demonstrating the advantages of disciplined team programming in reducing software development costs relative to ad hoc approaches...is due oartialty to the cost and imoracticality of a valiI experimental setup within a oroauct ion environment. Thus the question remains, are

Genetic Programming as Alternative for Predicting Development Effort of Individual Software Projects

PubMed Central

Chavoya, Arturo; Lopez-Martin, Cuauhtemoc; Andalon-Garcia, Irma R.; Meda-Campaña, M. E.

2012-01-01

Statistical and genetic programming techniques have been used to predict the software development effort of large software projects. In this paper, a genetic programming model was used for predicting the effort required in individually developed projects. Accuracy obtained from a genetic programming model was compared against one generated from the application of a statistical regression model. A sample of 219 projects developed by 71 practitioners was used for generating the two models, whereas another sample of 130 projects developed by 38 practitioners was used for validating them. The models used two kinds of lines of code as well as programming language experience as independent variables. Accuracy results from the model obtained with genetic programming suggest that it could be used to predict the software development effort of individual projects when these projects have been developed in a disciplined manner within a development-controlled environment. PMID:23226305

How reliable is computerized assessment of readability?

PubMed

Mailloux, S L; Johnson, M E; Fisher, D G; Pettibone, T J

1995-01-01

To assess the consistency and comparability of readability software programs, four software programs (Corporate Voice, Grammatix IV, Microsoft Word for Windows, and RightWriter) were compared. Standard materials included 28 pieces of printed educational materials on human immunodeficiency virus/acquired immunodeficiency syndrome distributed nationally and the Gettysburg Address. Statistical analyses for the educational materials revealed that each of the three formulas assessed (Flesch-Kincaid, Flesch Reading Ease, and Gunning Fog Index) provided significantly different grade equivalent scores and that the Microsoft Word program provided significantly lower grade levels and was more inconsistent in the scores provided. For the Gettysburg Address, considerable variation was revealed among formulas, with the discrepancy being up to two grade levels. When averaging across formulas, there was a variation of 1.3 grade levels between the four software programs. Given the variation between formulas and programs, implications for decisions based on results of these software programs are provided.

Efficient radiologic reading environment by using an open-source macro program as connection software.

PubMed

Lee, Young Han

2012-01-01

The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Software for Better Documentation of Other Software

NASA Technical Reports Server (NTRS)

Pinedo, John

2003-01-01

The Literate Programming Extraction Engine is a Practical Extraction and Reporting Language- (PERL-)based computer program that facilitates and simplifies the implementation of a concept of self-documented literate programming in a fashion tailored to the typical needs of scientists. The advantage for the programmer is that documentation and source code are written side-by-side in the same file, reducing the likelihood that the documentation will be inconsistent with the code and improving the verification that the code performs its intended functions. The advantage for the user is the knowledge that the documentation matches the software because they come from the same file. This program unifies the documentation process for a variety of programming languages, including C, C++, and several versions of FORTRAN. This program can process the documentation in any markup language, and incorporates the LaTeX typesetting software. The program includes sample Makefile scripts for automating both the code-compilation (when appropriate) and documentation-generation processes into a single command-line statement. Also included are macro instructions for the Emacs display-editor software, making it easy for a programmer to toggle between editing in a code or a documentation mode.

Machine Tool Software

NASA Technical Reports Server (NTRS)

1988-01-01

A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

Making software get along: integrating optical and mechanical design programs

NASA Astrophysics Data System (ADS)

Shackelford, Christie J.; Chinnock, Randal B.

2001-03-01

As modern optomechanical engineers, we have the good fortune of having very sophisticated software programs available to us. The current optical design, mechanical design, industrial design, and CAM programs are very powerful tools with some very desirable features. However, no one program can do everything necessary to complete an entire optomechanical system design. Each program has a unique set of features and benefits, and typically two or mo re will be used during the product development process. At a minimum, an optical design program and a mechanical CAD package will be employed. As we strive for efficient, cost-effective, and rapid progress in our development projects, we must use these programs to their full advantage, while keeping redundant tasks to a minimum. Together, these programs offer the promise of a `seamless' flow of data from concept all the way to the download of part designs directly to the machine shop for fabrication. In reality, transferring data from one software package to the next is often frustrating. Overcoming these problems takes some know-how, a bit of creativity, and a lot of persistence. This paper describes a complex optomechanical development effort in which a variety of software tools were used from the concept stage to prototyping. It will describe what software was used for each major design task, how we learned to use them together to best advantage, and how we overcame the frustrations of software that didn't get along.

Software packager user's guide

NASA Technical Reports Server (NTRS)

Callahan, John R.

1995-01-01

Software integration is a growing area of concern for many programmers and software managers because the need to build new programs quickly from existing components is greater than ever. This includes building versions of software products for multiple hardware platforms and operating systems, building programs from components written in different languages, and building systems from components that must execute on different machines in a distributed network. The goal of software integration is to make building new programs from existing components more seamless -- programmers should pay minimal attention to the underlying configuration issues involved. Libraries of reusable components and classes are important tools but only partial solutions to software development problems. Even though software components may have compatible interfaces, there may be other reasons, such as differences between execution environments, why they cannot be integrated. Often, components must be adapted or reimplemented to fit into another application because of implementation differences -- they are implemented in different programming languages, dependent on different operating system resources, or must execute on different physical machines. The software packager is a tool that allows programmers to deal with interfaces between software components and ignore complex integration details. The packager takes modular descriptions of the structure of a software system written in the package specification language and produces an integration program in the form of a makefile. If complex integration tools are needed to integrate a set of components, such as remote procedure call stubs, their use is implied by the packager automatically and stub generation tools are invoked in the corresponding makefile. The programmer deals only with the components themselves and not the details of how to build the system on any given platform.

Simplified programming and control of automated radiosynthesizers through unit operations.

PubMed

Claggett, Shane B; Quinn, Kevin M; Lazari, Mark; Moore, Melissa D; van Dam, R Michael

2013-07-15

Many automated radiosynthesizers for producing positron emission tomography (PET) probes provide a means for the operator to create custom synthesis programs. The programming interfaces are typically designed with the engineer rather than the radiochemist in mind, requiring lengthy programs to be created from sequences of low-level, non-intuitive hardware operations. In some cases, the user is even responsible for adding steps to update the graphical representation of the system. In light of these unnecessarily complex approaches, we have created software to perform radiochemistry on the ELIXYS radiosynthesizer with the goal of being intuitive and easy to use. Radiochemists were consulted, and a wide range of radiosyntheses were analyzed to determine a comprehensive set of basic chemistry unit operations. Based around these operations, we created a software control system with a client-server architecture. In an attempt to maximize flexibility, the client software was designed to run on a variety of portable multi-touch devices. The software was used to create programs for the synthesis of several 18F-labeled probes on the ELIXYS radiosynthesizer, with [18F]FDG detailed here. To gauge the user-friendliness of the software, program lengths were compared to those from other systems. A small sample group with no prior radiosynthesizer experience was tasked with creating and running a simple protocol. The software was successfully used to synthesize several 18F-labeled PET probes, including [18F]FDG, with synthesis times and yields comparable to literature reports. The resulting programs were significantly shorter and easier to debug than programs from other systems. The sample group of naive users created and ran a simple protocol within a couple of hours, revealing a very short learning curve. The client-server architecture provided reliability, enabling continuity of the synthesis run even if the computer running the client software failed. The architecture enabled a single user to control the hardware while others observed the run in progress or created programs for other probes. We developed a novel unit operation-based software interface to control automated radiosynthesizers that reduced the program length and complexity and also exhibited a short learning curve. The client-server architecture provided robustness and flexibility.

Simplified programming and control of automated radiosynthesizers through unit operations

PubMed Central

2013-01-01

Background Many automated radiosynthesizers for producing positron emission tomography (PET) probes provide a means for the operator to create custom synthesis programs. The programming interfaces are typically designed with the engineer rather than the radiochemist in mind, requiring lengthy programs to be created from sequences of low-level, non-intuitive hardware operations. In some cases, the user is even responsible for adding steps to update the graphical representation of the system. In light of these unnecessarily complex approaches, we have created software to perform radiochemistry on the ELIXYS radiosynthesizer with the goal of being intuitive and easy to use. Methods Radiochemists were consulted, and a wide range of radiosyntheses were analyzed to determine a comprehensive set of basic chemistry unit operations. Based around these operations, we created a software control system with a client–server architecture. In an attempt to maximize flexibility, the client software was designed to run on a variety of portable multi-touch devices. The software was used to create programs for the synthesis of several 18F-labeled probes on the ELIXYS radiosynthesizer, with [18F]FDG detailed here. To gauge the user-friendliness of the software, program lengths were compared to those from other systems. A small sample group with no prior radiosynthesizer experience was tasked with creating and running a simple protocol. Results The software was successfully used to synthesize several 18F-labeled PET probes, including [18F]FDG, with synthesis times and yields comparable to literature reports. The resulting programs were significantly shorter and easier to debug than programs from other systems. The sample group of naive users created and ran a simple protocol within a couple of hours, revealing a very short learning curve. The client–server architecture provided reliability, enabling continuity of the synthesis run even if the computer running the client software failed. The architecture enabled a single user to control the hardware while others observed the run in progress or created programs for other probes. Conclusions We developed a novel unit operation-based software interface to control automated radiosynthesizers that reduced the program length and complexity and also exhibited a short learning curve. The client–server architecture provided robustness and flexibility. PMID:23855995

A tool to include gamma analysis software into a quality assurance program.

PubMed

Agnew, Christina E; McGarry, Conor K

2016-03-01

To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

The Environment for Application Software Integration and Execution (EASIE) version 1.0. Volume 1: Executive overview

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Davis, John S.

1989-01-01

The Environment for Application Software Integration and Execution (EASIE) provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational database management system. Volume 1, Executive Overview, gives an overview of the functions provided by EASIE and describes their use. Three operational design systems based upon the EASIE software are briefly described.

An Ada Linear-Algebra Software Package Modeled After HAL/S

NASA Technical Reports Server (NTRS)

Klumpp, Allan R.; Lawson, Charles L.

1990-01-01

New avionics software written more easily. Software package extends Ada programming language to include linear-algebra capabilities similar to those of HAL/S programming language. Designed for such avionics applications as Space Station flight software. In addition to built-in functions of HAL/S, package incorporates quaternion functions used in Space Shuttle and Galileo projects and routines from LINPAK solving systems of equations involving general square matrices. Contains two generic programs: one for floating-point computations and one for integer computations. Written on IBM/AT personal computer running under PC DOS, v.3.1.

Perspectives on NASA flight software development - Apollo, Shuttle, Space Station

NASA Technical Reports Server (NTRS)

Garman, John R.

1990-01-01

Flight data systems' software development is chronicled for the period encompassing NASA's Apollo, Space Shuttle, and (ongoing) Space Station Freedom programs, with attention to the methodologies and 'development tools' employed in each case and their mutual relationships. A dominant concern in all three programs has been the accommodation of software change; it has also been noted that any such long-term program carries the additional challenge of identifying which elements of its software-related 'institutional memory' are most critical, in order to preclude their loss through the retirement, promotion, or transfer of its 'last expert'.

Streamlining Software Aspects of Certification: Technical Team Report on the First Industry Workshop

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Holloway, C. Michael; Knight, John C.; Leveson, Nancy G.; Yang, Jeffrey C.; Dorsey, Cheryl A.; McCormick, G. Frank

1998-01-01

To address concerns about time and expense associated with software aspects of certification, the Federal Aviation Administration (FAA) began the Streamlining Software Aspects of Certification (SSAC) program. As part of this program, a Technical Team was established to determine whether the cost and time associated with certifying aircraft can be reduced while maintaining or improving safety, with the intent of impacting the FAA's Flight 2000 program. The Technical Team conducted a workshop to gain a better understanding of the major concerns in industry about software cost and schedule. Over 120 people attended the workshop, including representatives from the FAA,commercial transport and general aviation aircraft manufacturers and suppliers, and procurers and developers of non-airborne systems; and, more than 200 issues about software aspects of certification were recorded. This paper provides an overview of the SSAC program, motivation for the workshop, details of the workshop activities and outcomes, and recommendations for follow-on work.

Analyzing Population Genetics Data: A Comparison of the Software

USDA-ARS?s Scientific Manuscript database

Choosing a software program for analyzing population genetic data can be a challenge without prior knowledge of the methods used by each program. There are numerous web sites listing programs by type of data analyzed, type of analyses performed, or other criteria. Even with programs categorized in ...

Customer Service Programming

NASA Technical Reports Server (NTRS)

1982-01-01

Use of computer program STRCMACS has enabled Illinois Bell Telephone, a subsidiary of American Telephone and Telegraph to cut software development costs about 10 percent by reducing program maintenance and by allowing the department to bring other software into operation more quickly. It has also been useful in company training of programming staff.

A Comparison of Two Commercial Volumetry Software Programs in the Analysis of Pulmonary Ground-Glass Nodules: Segmentation Capability and Measurement Accuracy

PubMed Central

Kim, Hyungjin; Lee, Sang Min; Lee, Hyun-Ju; Goo, Jin Mo

2013-01-01

Objective To compare the segmentation capability of the 2 currently available commercial volumetry software programs with specific segmentation algorithms for pulmonary ground-glass nodules (GGNs) and to assess their measurement accuracy. Materials and Methods In this study, 55 patients with 66 GGNs underwent unenhanced low-dose CT. GGN segmentation was performed by using 2 volumetry software programs (LungCARE, Siemens Healthcare; LungVCAR, GE Healthcare). Successful nodule segmentation was assessed visually and morphologic features of GGNs were evaluated to determine factors affecting segmentation by both types of software. In addition, the measurement accuracy of the software programs was investigated by using an anthropomorphic chest phantom containing simulated GGNs. Results The successful nodule segmentation rate was significantly higher in LungCARE (90.9%) than in LungVCAR (72.7%) (p = 0.012). Vascular attachment was a negatively influencing morphologic feature of nodule segmentation for both software programs. As for measurement accuracy, mean relative volume measurement errors in nodules ≥ 10 mm were 14.89% with LungCARE and 19.96% with LungVCAR. The mean relative attenuation measurement errors in nodules ≥ 10 mm were 3.03% with LungCARE and 5.12% with LungVCAR. Conclusion LungCARE shows significantly higher segmentation success rates than LungVCAR. Measurement accuracy of volume and attenuation of GGNs is acceptable in GGNs ≥ 10 mm by both software programs. PMID:23901328

Design Your Own Instructional Software: It's Easy.

ERIC Educational Resources Information Center

Pauline, Ronald F.

Computer Assisted Instruction (CAI) is, quite simply, an instance in which instructional content activities are delivered via a computer. Many commercially-available software programs, although excellent programs, may not be acceptable for each individual teacher's classroom. One way to insure that software is not only acceptable but also targets…

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUEL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

A comprehensive, user-friendly geostatistical software system called GEOPACk has been developed. The purpose of this software is to make available the programs necessary to undertake a geostatistical analysis of spatially correlated data. The programs were written so that they ...

Computer software management, evaluation, and dissemination

NASA Technical Reports Server (NTRS)

1983-01-01

The activities of the Computer Software Management and Information Center involving the collection, processing, and distribution of software developed under the auspices of NASA and certain other federal agencies are reported. Program checkout and evaluation, inventory control, customer services and marketing, dissemination, program maintenance, and special development tasks are discussed.

48 CFR 1552.215-72 - Instructions for the Preparation of Proposals.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of the information, to expedite review of the proposal, submit an IBM-compatible software or storage... offeror used another spreadsheet program, indicate the software program used to create this information... submission of a compatible software or device will expedite review, failure to submit a disk will not affect...

48 CFR 1552.215-72 - Instructions for the Preparation of Proposals.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of the information, to expedite review of the proposal, submit an IBM-compatible software or storage... offeror used another spreadsheet program, indicate the software program used to create this information... submission of a compatible software or device will expedite review, failure to submit a disk will not affect...

77 FR 31758 - Airworthiness Directives; the Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

.... That NPRM proposed to inspect for part numbers of the operational program software of the flight... operational program software (OPS) of the flight control computers (FCC), and doing corrective actions if... previous NPRM (75 FR 57885, September 23, 2010), we have determined that the software installation required...

Building Software Development Capacity to Advance the State of Educational Technology

ERIC Educational Resources Information Center

Luterbach, Kenneth J.

2013-01-01

Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

42 CFR 495.360 - Software and ownership rights.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Software and ownership rights. 495.360 Section 495.360 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... PROGRAM Requirements Specific to the Medicaid Program § 495.360 Software and ownership rights. (a) General...

School Nutrition Directors' Perceptions of Technology Use in School Nutrition Programs

ERIC Educational Resources Information Center

Pratt, Peggy; Bednar, Carolyn; Kwon, Junehee

2012-01-01

Purpose/Objectives: This study investigated the types of technology/software currently used by Southwest Region school nutrition directors (SNDs) and assessed their perceptions of barriers to purchasing new technology/software. In addition, the importance of future technology/software acquisitions in meeting school nutrition program (SNP) goals…

Knowledge Sharing through Pair Programming in Learning Environments: An Empirical Study

ERIC Educational Resources Information Center

Kavitha, R. K.; Ahmed, M. S.

2015-01-01

Agile software development is an iterative and incremental methodology, where solutions evolve from self-organizing, cross-functional teams. Pair programming is a type of agile software development technique where two programmers work together with one computer for developing software. This paper reports the results of the pair programming…

A Bibliography of Externally Published Works by the SEI Engineering Techniques Program

DTIC Science & Technology

1992-08-01

media, and virtual reality * model- based engineering * programming languages * reuse * software architectures * software engineering as a discipline...Knowledge- Based Engineering Environments." IEEE Expert 3, 2 (May 1988): 18-23, 26-32. Audience: Practitioner [Klein89b] Klein, D.V. "Comparison of...Terms with Software Reuse Terminology: A Model- Based Approach." ACM SIGSOFT Software Engineering Notes 16, 2 (April 1991): 45-51. Audience: Practitioner

Software for Real-Time Analysis of Subsonic Test Shot Accuracy

DTIC Science & Technology

2014-03-01

used the C++ programming language, the Open Source Computer Vision ( OpenCV ®) software library, and Microsoft Windows® Application Programming...video for comparison through OpenCV image analysis tools. Based on the comparison, the software then computed the coordinates of each shot relative to...DWB researchers wanted to use the Open Source Computer Vision ( OpenCV ) software library for capturing and analyzing frames of video. OpenCV contains

Software Maintenance Exercises for a Software Engineering Project Course

DTIC Science & Technology

1989-02-01

what is program style and how can it be measured? Program style has been defined as a "followed convention with respect to punctuation, capitalization ...convention with respect to punctuation, capitalization , and typographic arrangement and display." *DASC is a software tool that takes a syntactically...Specilleauons: A Frarnewo* * CM-12 Software Metrws CM- 13 Introduction to Softwarell Verification and Validation CM-14 Intelectual Property Protection for

An Examination of the Demographic and Career Progression of Air Force Institute of Technology Cost Analysis Graduates.

DTIC Science & Technology

1997-09-01

program include the ACEIT software training and the combination of Department of Defense (DOD) application, regression, and statistics. The weaknesses...and Integrated Tools ( ACEIT ) software and training could not be praised enough. AFIT vs. Civilian Institutions. The GCA program provides a Department...very useful to the graduates and beneficial to their careers. The main strengths of the program include the ACEIT software training and the combination

Calibration of work zone impact analysis software for Missouri.

DOT National Transportation Integrated Search

2013-12-01

This project calibrated two software programs used for estimating the traffic impacts of work zones. The WZ Spreadsheet : and VISSIM programs were recommended in a previous study by the authors. The two programs were calibrated using : field data fro...

The SCEC/UseIT Intern Program: Creating Open-Source Visualization Software Using Diverse Resources

NASA Astrophysics Data System (ADS)

Francoeur, H.; Callaghan, S.; Perry, S.; Jordan, T.

2004-12-01

The Southern California Earthquake Center undergraduate IT intern program (SCEC UseIT) conducts IT research to benefit collaborative earth science research. Through this program, interns have developed real-time, interactive, 3D visualization software using open-source tools. Dubbed LA3D, a distribution of this software is now in use by the seismic community. LA3D enables the user to interactively view Southern California datasets and models of importance to earthquake scientists, such as faults, earthquakes, fault blocks, digital elevation models, and seismic hazard maps. LA3D is now being extended to support visualizations anywhere on the planet. The new software, called SCEC-VIDEO (Virtual Interactive Display of Earth Objects), makes use of a modular, plugin-based software architecture which supports easy development and integration of new data sets. Currently SCEC-VIDEO is in beta testing, with a full open-source release slated for the future. Both LA3D and SCEC-VIDEO were developed using a wide variety of software technologies. These, which included relational databases, web services, software management technologies, and 3-D graphics in Java, were necessary to integrate the heterogeneous array of data sources which comprise our software. Currently the interns are working to integrate new technologies and larger data sets to increase software functionality and value. In addition, both LA3D and SCEC-VIDEO allow the user to script and create movies. Thus program interns with computer science backgrounds have been writing software while interns with other interests, such as cinema, geology, and education, have been making movies that have proved of great use in scientific talks, media interviews, and education. Thus, SCEC UseIT incorporates a wide variety of scientific and human resources to create products of value to the scientific and outreach communities. The program plans to continue with its interdisciplinary approach, increasing the relevance of the software and expanding its use in the scientific community.

Establishing Qualitative Software Metrics in Department of the Navy Programs

DTIC Science & Technology

2015-10-29

dedicated to provide the highest quality software to its users. In doing, there is a need for a formalized set of Software Quality Metrics . The goal...of this paper is to establish the validity of those necessary Quality metrics . In our approach we collected the data of over a dozen programs...provide the necessary variable data for our formulas and tested the formulas for validity. Keywords: metrics ; software; quality I. PURPOSE Space

Software For Genetic Algorithms

NASA Technical Reports Server (NTRS)

Wang, Lui; Bayer, Steve E.

1992-01-01

SPLICER computer program is genetic-algorithm software tool used to solve search and optimization problems. Provides underlying framework and structure for building genetic-algorithm application program. Written in Think C.

Software Reviews.

ERIC Educational Resources Information Center

Davis, Shelly J., Ed.; Knaupp, Jon, Ed.

1984-01-01

Reviewed is computer software on: (1) classification of living things, a tutorial program for grades 5-10; and (2) polynomial practice using tiles, a drill-and-practice program for algebra students. (MNS)

Using Software Tools to Automate the Assessment of Student Programs.

ERIC Educational Resources Information Center

Jackson, David

1991-01-01

Argues that advent of computer-aided instruction (CAI) systems for teaching introductory computer programing makes it imperative that software be developed to automate assessment and grading of student programs. Examples of typical student programing problems are given, and application of the Unix tools Lex and Yacc to the automatic assessment of…

The Effects of Beacons, Comments, and Tasks on Program Comprehension Process in Software Maintenance

ERIC Educational Resources Information Center

Fan, Quyin

2010-01-01

Program comprehension is the most important and frequent process in software maintenance. Extensive research has found that individual characteristics of programmers, differences of computer programs, and differences of task-driven motivations are the major factors that affect the program comprehension results. There is no study specifically…

OHD/HL - National Weather Hydrology Laboratory

Science.gov Websites

resources and services. Design and Programming Standards and Guidelines General Programming C C++ FORTRAN Java v 2.0 updated 3/28/2008 Java v 1.9 Korn and Bash Shell Software Design Phase Guidelines OHD Design Specification Template OHD Design Specification Example Software Peer Review Guidelines and Checklists Software

Orbit attitude processor. STS-1 bench program verification test plan

NASA Technical Reports Server (NTRS)

Mcclain, C. R.

1980-01-01

A plan for the static verification of the STS-1 ATT PROC ORBIT software requirements is presented. The orbit version of the SAPIENS bench program is used to generate the verification data. A brief discussion of the simulation software and flight software modules is presented along with a description of the test cases.

"Horses for Courses": Categories of Computer-Based Learning Program and Their Uses in Pharmacology Courses.

ERIC Educational Resources Information Center

Hughes, Ian E.

1998-01-01

Describes the pharma-CAL-ogy project, funded by Teaching and Learning Technology Programme (TLTP), which has developed various types of software for use in pharmacology courses. Topics include course organization and delivery software, drill and practice software, tutorial-type programs, simulations, and the need to integrate computer-assisted…

Active Learning through Modeling: Introduction to Software Development in the Business Curriculum

ERIC Educational Resources Information Center

Roussev, Boris; Rousseva, Yvonna

2004-01-01

Modern software practices call for the active involvement of business people in the software process. Therefore, programming has become an indispensable part of the information systems component of the core curriculum at business schools. In this paper, we present a model-based approach to teaching introduction to programming to general business…

A Guide to Street Tree Inventory Software

Treesearch

Gene A. Olig; Robert W. Miller

1997-01-01

The purpose of this publication is to serve as a reference and guide for urban forestry professionals in the selection of a street tree inventory software program. The programs described include only those that are commercially available. The increasing demand for street tree inventory software follows a trend towards a more computerized society and the increasing...

Exploration Guides as a Strategy to Improve the Effectiveness of Educational Software in Chemistry

ERIC Educational Resources Information Center

Paiva, Joao Carlos; da Costa, Luiza Alves

2010-01-01

Guiding students while they explore educational software is important in order to convey the pedagogical pragmatism that many programs seem to lack. This article points out some characteristics that we believe educational software exploration guides must contain for students to benefit from using these programs. The supporting information includes…

Applications of artificial intelligence to mission planning

NASA Technical Reports Server (NTRS)

Ford, Donnie R.; Floyd, Stephen A.; Rogers, John S.

1990-01-01

The following subject areas are covered: object-oriented programming task; rule-based programming task; algorithms for resource allocation; connecting a Symbolics to a VAX; FORTRAN from Lisp; trees and forest task; software data structure conversion; software functionality modifications and enhancements; portability of resource allocation to a TI MicroExplorer; frontier of feasibility software system; and conclusions.

Wildlife software: procedures for publication of computer software

USGS Publications Warehouse

Samuel, M.D.

1990-01-01

Computers and computer software have become an integral part of the practice of wildlife science. Computers now play an important role in teaching, research, and management applications. Because of the specialized nature of wildlife problems, specific computer software is usually required to address a given problem (e.g., home range analysis). This type of software is not usually available from commercial vendors and therefore must be developed by those wildlife professionals with particular skill in computer programming. Current journal publication practices generally prevent a detailed description of computer software associated with new techniques. In addition, peer review of journal articles does not usually include a review of associated computer software. Thus, many wildlife professionals are usually unaware of computer software that would meet their needs or of major improvements in software they commonly use. Indeed most users of wildlife software learn of new programs or important changes only by word of mouth.

AVE-SESAME program for the REEDA System

NASA Technical Reports Server (NTRS)

Hickey, J. S.

1981-01-01

The REEDA system software was modified and improved to process the AVE-SESAME severe storm data. A random access file system for the AVE storm data was designed, tested, and implemented. The AVE/SESAME software was modified to incorporate the random access file input and to interface with new graphics hardware/software now available on the REEDA system. Software was developed to graphically display the AVE/SESAME data in the convention normally used by severe storm researchers. Software was converted to AVE/SESAME software systems and interfaced with existing graphics hardware/software available on the REEDA System. Software documentation was provided for existing AVE/SESAME programs underlining functional flow charts and interacting questions. All AVE/SESAME data sets in random access format was processed to allow developed software to access the entire AVE/SESAME data base. The existing software was modified to allow for processing of different AVE/SESAME data set types including satellite surface and radar data.

Software Review.

ERIC Educational Resources Information Center

McGrath, Diane, Ed.

1989-01-01

Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

Using Visual Basic to Teach Programming for Geographers.

ERIC Educational Resources Information Center

Slocum, Terry A.; Yoder, Stephen C.

1996-01-01

Outlines reasons why computer programming should be taught to geographers. These include experience using macro (scripting) languages and sophisticated visualization software, and developing a deeper understanding of general hardware and software capabilities. Discusses the distinct advantages and few disadvantages of the programming language…

Simple solution to the medical instrumentation software problem

NASA Astrophysics Data System (ADS)

Leif, Robert C.; Leif, Suzanne B.; Leif, Stephanie H.; Bingue, E.

1995-04-01

Medical devices now include a substantial software component, which is both difficult and expensive to produce and maintain. Medical software must be developed according to `Good Manufacturing Practices', GMP. Good Manufacturing Practices as specified by the FDA and ISO requires the definition and compliance to a software processes which ensures quality products by specifying a detailed method of software construction. The software process should be based on accepted standards. US Department of Defense software standards and technology can both facilitate the development and improve the quality of medical systems. We describe the advantages of employing Mil-Std-498, Software Development and Documentation, and the Ada programming language. Ada provides the very broad range of functionalities, from embedded real-time to management information systems required by many medical devices. It also includes advanced facilities for object oriented programming and software engineering.

Software assurance standard

NASA Technical Reports Server (NTRS)

1992-01-01

This standard specifies the software assurance program for the provider of software. It also delineates the assurance activities for the provider and the assurance data that are to be furnished by the provider to the acquirer. In any software development effort, the provider is the entity or individual that actually designs, develops, and implements the software product, while the acquirer is the entity or individual who specifies the requirements and accepts the resulting products. This standard specifies at a high level an overall software assurance program for software developed for and by NASA. Assurance includes the disciplines of quality assurance, quality engineering, verification and validation, nonconformance reporting and corrective action, safety assurance, and security assurance. The application of these disciplines during a software development life cycle is called software assurance. Subsequent lower-level standards will specify the specific processes within these disciplines.

MUST - An integrated system of support tools for research flight software engineering. [Multipurpose User-oriented Software Technology

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

The objectives of NASA's MUST (Multipurpose User-oriented Software Technology) program at Langley Research Center are to cut the cost of producing software which effectively utilizes digital systems for flight research. These objectives will be accomplished by providing an integrated system of support software tools for use throughout the research flight software development process. A description of the overall MUST program and its progress toward the release of a first MUST system will be presented. This release includes: a special interactive user interface, a library of subroutines, assemblers, a compiler, automatic documentation tools, and a test and simulation system.

Proceedings of the Workshop on Software Engineering Foundations for End-User Programming (SEEUP 2009)

DTIC Science & Technology

2009-11-01

interest of scientific and technical information exchange. This work is sponsored by the U.S. Department of Defense. The Software Engineering Institute is a...an interesting conti- nuum between how many different requirements a program must satisfy: the more complex and diverse the requirements, the more... Gender differences in approaches to end-user software development have also been reported in debugging feature usage [1] and in end-user web programming

Report: Scientific Software.

ERIC Educational Resources Information Center

Borman, Stuart A.

1985-01-01

Discusses various aspects of scientific software, including evaluation and selection of commercial software products; program exchanges, catalogs, and other information sources; major data analysis packages; statistics and chemometrics software; and artificial intelligence. (JN)

The probability estimation of the electronic lesson implementation taking into account software reliability

NASA Astrophysics Data System (ADS)

Gurov, V. V.

2017-01-01

Software tools for educational purposes, such as e-lessons, computer-based testing system, from the point of view of reliability, have a number of features. The main ones among them are the need to ensure a sufficiently high probability of their faultless operation for a specified time, as well as the impossibility of their rapid recovery by the way of replacing it with a similar running program during the classes. The article considers the peculiarities of reliability evaluation of programs in contrast to assessments of hardware reliability. The basic requirements to reliability of software used for carrying out practical and laboratory classes in the form of computer-based training programs are given. The essential requirements applicable to the reliability of software used for conducting the practical and laboratory studies in the form of computer-based teaching programs are also described. The mathematical tool based on Markov chains, which allows to determine the degree of debugging of the training program for use in the educational process by means of applying the graph of the software modules interaction, is presented.

Update on PISCES

NASA Technical Reports Server (NTRS)

Pearson, Don; Hamm, Dustin; Kubena, Brian; Weaver, Jonathan K.

2010-01-01

An updated version of the Platform Independent Software Components for the Exploration of Space (PISCES) software library is available. A previous version was reported in Library for Developing Spacecraft-Mission-Planning Software (MSC-22983), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 52. To recapitulate: This software provides for Web-based, collaborative development of computer programs for planning trajectories and trajectory- related aspects of spacecraft-mission design. The library was built using state-of-the-art object-oriented concepts and software-development methodologies. The components of PISCES include Java-language application programs arranged in a hierarchy of classes that facilitates the reuse of the components. As its full name suggests, the PISCES library affords platform-independence: The Java language makes it possible to use the classes and application programs with a Java virtual machine, which is available in most Web-browser programs. Another advantage is expandability: Object orientation facilitates expansion of the library through creation of a new class. Improvements in the library since the previous version include development of orbital-maneuver- planning and rendezvous-launch-window application programs, enhancement of capabilities for propagation of orbits, and development of a desktop user interface.

Efficacy of a Newly Designed Cephalometric Analysis Software for McNamara Analysis in Comparison with Dolphin Software.

PubMed

Nouri, Mahtab; Hamidiaval, Shadi; Akbarzadeh Baghban, Alireza; Basafa, Mohammad; Fahim, Mohammad

2015-01-01

Cephalometric norms of McNamara analysis have been studied in various populations due to their optimal efficiency. Dolphin cephalometric software greatly enhances the conduction of this analysis for orthodontic measurements. However, Dolphin is very expensive and cannot be afforded by many clinicians in developing countries. A suitable alternative software program in Farsi/English will greatly help Farsi speaking clinicians. The present study aimed to develop an affordable Iranian cephalometric analysis software program and compare it with Dolphin, the standard software available on the market for cephalometric analysis. In this diagnostic, descriptive study, 150 lateral cephalograms of normal occlusion individuals were selected in Mashhad and Qazvin, two major cities of Iran mainly populated with Fars ethnicity, the main Iranian ethnic group. After tracing the cephalograms, the McNamara analysis standards were measured both with Dolphin and the new software. The cephalometric software was designed using Microsoft Visual C++ program in Windows XP. Measurements made with the new software were compared with those of Dolphin software on both series of cephalograms. The validity and reliability were tested using intra-class correlation coefficient. Calculations showed a very high correlation between the results of the Iranian cephalometric analysis software and Dolphin. This confirms the validity and optimal efficacy of the newly designed software (ICC 0.570-1.0). According to our results, the newly designed software has acceptable validity and reliability and can be used for orthodontic diagnosis, treatment planning and assessment of treatment outcome.

IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

NASA Technical Reports Server (NTRS)

Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

1981-01-01

This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

Computer-Based Educational Software System. Final Report.

ERIC Educational Resources Information Center

Brandt, Richard C.; Davis, Bradley N.

CBESS (Computer-Based Educational Software System) is a set of 22 programs addressing authoring, instructional delivery, and instructional management. The programs are divided into five groups: (1) Computer-Based Memorization System (CBMS), which helps students acquire and maintain declarative (factual) knowledge (11 programs); (2) Language Skills…

CREASE 6.0 Catalog of Resources for Education in Ada and Software Engineering

DTIC Science & Technology

1992-02-01

Programming Software Engineering Strong Typing Tasking Audene . Computer Scientists Terbook(s): Barnes, J. Programming in Ada, 3rd ed. Addison-Wesley...Ada. Concept: Abstract Data Types Management Overview Package Real-Time Programming Tasking Audene Computer Scientists Textbook(s): Barnes, J

Tailoring Software Inspections for Aspect-Oriented Programming

ERIC Educational Resources Information Center

Watkins, Charlette Ward

2009-01-01

Aspect-Oriented Software Development (AOSD) is a new approach that addresses limitations inherent in conventional programming, especially the principle of separation of concerns by emphasizing the encapsulation and modularization of crosscutting concerns through a new abstraction, the "aspect." Aspect-oriented programming is an emerging AOSD…

Software For Clear-Air Doppler-Radar Display

NASA Technical Reports Server (NTRS)

Johnston, Bruce W.

1990-01-01

System of software developed to present plan-position-indicator scans of clear-air Doppler radar station on color graphical cathode-ray-tube display. Designed to incorporate latest accepted standards for equipment, computer programs, and meteorological data bases. Includes use of Ada programming language, of "Graphical-Kernel-System-like" graphics interface, and of Common Doppler Radar Exchange Format. Features include portability and maintainability. Use of Ada software packages produced number of software modules reused on other related projects.

Agile Software Teams: How They Engage with Systems Engineering on DoD Acquisition Programs

DTIC Science & Technology

2014-07-01

under Contract No. FA8721-05-C-0003 with Carnegie Mellon University for the operation of the Software Engineer- ing Institute, a federally funded...issues that would preclude or limit the use of Agile methods within the DoD” [Broadus 2013]. As operational tempos increase and programs fight to...environment in which it operates . This makes software different from other disciplines that have toleranc- es, generally resulting in software engineering

A proposed research program in information processing

NASA Technical Reports Server (NTRS)

Schorr, Herbert

1992-01-01

The goal of the Formalized Software Development (FSD) project was to demonstrate improvements productivity of software development and maintenance through the use of a new software lifecycle paradigm. The paradigm calls for the mechanical, but human-guided, derivation of software implementations from formal specifications of the desired software behavior. It relies on altering a system's specification and rederiving its implementation as the standard technology for software maintenance. A system definition for this paradigm is composed of a behavioral specification together with a body of annotations that control the derivation of executable code from the specification. Annotations generally achieve the selection of certain data representations and/or algorithms that are consistent with, but not mandated by, the behavioral specification. In doing this, they may yield systems which exhibit only certain behaviors among multiple alternatives permitted by the behavioral specification. The FSD project proposed to construct a testbed in which to explore the realization of this new paradigm. The testbed was to provide operational support environment for software design, implementation, and maintenance. The testbed was proposed to provide highly automated support for individual programmers ('programming in the small'), but not to address the additional needs of programming teams ('programming in the large'). The testbed proposed to focus on supporting rapid construction and evolution of useful prototypes of software systems, as opposed to focusing on the problems of achieving production quality performance of systems.

TCP/IP Interface for the Satellite Orbit Analysis Program (SOAP)

NASA Technical Reports Server (NTRS)

Carnright, Robert; Stodden, David; Coggi, John

2009-01-01

The Transmission Control Protocol/ Internet protocol (TCP/IP) interface for the Satellite Orbit Analysis Program (SOAP) provides the means for the software to establish real-time interfaces with other software. Such interfaces can operate between two programs, either on the same computer or on different computers joined by a network. The SOAP TCP/IP module employs a client/server interface where SOAP is the server and other applications can be clients. Real-time interfaces between software offer a number of advantages over embedding all of the common functionality within a single program. One advantage is that they allow each program to divide the computation labor between processors or computers running the separate applications. Secondly, each program can be allowed to provide its own expertise domain with other programs able to use this expertise.

Challenges and Demands on Automated Software Revision

NASA Technical Reports Server (NTRS)

Bonakdarpour, Borzoo; Kulkarni, Sandeep S.

2008-01-01

In the past three decades, automated program verification has undoubtedly been one of the most successful contributions of formal methods to software development. However, when verification of a program against a logical specification discovers bugs in the program, manual manipulation of the program is needed in order to repair it. Thus, in the face of existence of numerous unverified and un- certified legacy software in virtually any organization, tools that enable engineers to automatically verify and subsequently fix existing programs are highly desirable. In addition, since requirements of software systems often evolve during the software life cycle, the issue of incomplete specification has become a customary fact in many design and development teams. Thus, automated techniques that revise existing programs according to new specifications are of great assistance to designers, developers, and maintenance engineers. As a result, incorporating program synthesis techniques where an algorithm generates a program, that is correct-by-construction, seems to be a necessity. The notion of manual program repair described above turns out to be even more complex when programs are integrated with large collections of sensors and actuators in hostile physical environments in the so-called cyber-physical systems. When such systems are safety/mission- critical (e.g., in avionics systems), it is essential that the system reacts to physical events such as faults, delays, signals, attacks, etc, so that the system specification is not violated. In fact, since it is impossible to anticipate all possible such physical events at design time, it is highly desirable to have automated techniques that revise programs with respect to newly identified physical events according to the system specification.

National Collegiate Software Clearinghouse Software for the Humanities and Social Sciences. Summer 1989 Catalog.

ERIC Educational Resources Information Center

National Collegiate Software Clearinghouse, Durham, NC.

Over 250 microcomputer software packages, intended for use on MS-DOS machines by scholars and teachers in the humanities and social sciences, are included in this catalog. The clearinghouse's first Macintosh listing is included, with many more Macintosh programs and data sets being planned and tested for future inclusion. Most programs were…

Improving the Effectiveness of Program Managers

DTIC Science & Technology

2006-05-03

Improving the Effectiveness of Program Managers Systems and Software Technology Conference Salt Lake City, Utah May 3, 2006 Presented by GAO’s...Companies’ best practices Motorola Caterpillar Toyota FedEx NCR Teradata Boeing Hughes Space and Communications Disciplined software and management...and total ownership costs Collection of metrics data to improve software reliability Technology readiness levels and design maturity Statistical

Research flight software engineering and MUST, an integrated system of support tools

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

Consideration is given to software development to support NASA flight research. The Multipurpose User-Oriented Software Technology (MUST) program, designed to integrate digital systems into flight research, is discussed. Particular attention is given to the program's special interactive user interface, subroutine library, assemblers, compiler, automatic documentation tools, and test and simulation subsystems.

An Object-Oriented Approach to Writing Computational Electromagnetics Codes

NASA Technical Reports Server (NTRS)

Zimmerman, Martin; Mallasch, Paul G.

1996-01-01

Presently, most computer software development in the Computational Electromagnetics (CEM) community employs the structured programming paradigm, particularly using the Fortran language. Other segments of the software community began switching to an Object-Oriented Programming (OOP) paradigm in recent years to help ease design and development of highly complex codes. This paper examines design of a time-domain numerical analysis CEM code using the OOP paradigm, comparing OOP code and structured programming code in terms of software maintenance, portability, flexibility, and speed.

Organization and use of a Software/Hardware Avionics Research Program (SHARP)

NASA Technical Reports Server (NTRS)

Karmarkar, J. S.; Kareemi, M. N.

1975-01-01

The organization and use is described of the software/hardware avionics research program (SHARP) developed to duplicate the automatic portion of the STOLAND simulator system, on a general-purpose computer system (i.e., IBM 360). The program's uses are: (1) to conduct comparative evaluation studies of current and proposed airborne and ground system concepts via single run or Monte Carlo simulation techniques, and (2) to provide a software tool for efficient algorithm evaluation and development for the STOLAND avionics computer.

U.S. Geological Survey National Computer Technology Meeting: Program and Abstracts, Norfolk, Virginia, May 17-22, 1992

DTIC Science & Technology

1992-05-01

formats, and character formats that can easily integrate graphics and text into one document. FrameMaker is one of few ERP software programs that has...easier and faster using ERP software. The DIS-II ERP software program is FrameMaker by Frame Technology, Incorporated. FrameMaker uses the X window...functions, calculus, relations, and other complicated math applications. FrameMaker permits the user to define formats for master pages, reference pages

Process description language: an experiment in robust programming for manufacturing systems

NASA Astrophysics Data System (ADS)

Spooner, Natalie R.; Creak, G. Alan

1998-10-01

Maintaining stable, robust, and consistent software is difficult in face of the increasing rate of change of customers' preferences, materials, manufacturing techniques, computer equipment, and other characteristic features of manufacturing systems. It is argued that software is commonly difficult to keep up to date because many of the implications of these changing features on software details are obscure. A possible solution is to use a software generation system in which the transformation of system properties into system software is made explicit. The proposed generation system stores the system properties, such as machine properties, product properties and information on manufacturing techniques, in databases. As a result this information, on which system control is based, can also be made available to other programs. In particular, artificial intelligence programs such as fault diagnosis programs, can benefit from using the same information as the control system, rather than a separate database which must be developed and maintained separately to ensure consistency. Experience in developing a simplified model of such a system is presented.

Building quality into medical product software design.

PubMed

Mallory, S R

1993-01-01

The software engineering and quality assurance disciplines are a requisite to the design of safe and effective software-based medical devices. It is in the areas of software methodology and process that the most beneficial application of these disciplines to software development can be made. Software is a product of complex operations and methodologies and is not amenable to the traditional electromechanical quality assurance processes. Software quality must be built in by the developers, with the software verification and validation engineers acting as the independent instruments for ensuring compliance with performance objectives and with development and maintenance standards. The implementation of a software quality assurance program is a complex process involving management support, organizational changes, and new skill sets, but the benefits are profound. Its rewards provide safe, reliable, cost-effective, maintainable, and manageable software, which may significantly speed the regulatory review process and therefore potentially shorten the overall time to market. The use of a trial project can greatly facilitate the learning process associated with the first-time application of a software quality assurance program.

Computer Programs.

ERIC Educational Resources Information Center

Anderson, Tiffoni

This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

Type Safe Extensible Programming

NASA Astrophysics Data System (ADS)

Chae, Wonseok

2009-10-01

Software products evolve over time. Sometimes they evolve by adding new features, and sometimes by either fixing bugs or replacing outdated implementations with new ones. When software engineers fail to anticipate such evolution during development, they will eventually be forced to re-architect or re-build from scratch. Therefore, it has been common practice to prepare for changes so that software products are extensible over their lifetimes. However, making software extensible is challenging because it is difficult to anticipate successive changes and to provide adequate abstraction mechanisms over potential changes. Such extensibility mechanisms, furthermore, should not compromise any existing functionality during extension. Software engineers would benefit from a tool that provides a way to add extensions in a reliable way. It is natural to expect programming languages to serve this role. Extensible programming is one effort to address these issues. In this thesis, we present type safe extensible programming using the MLPolyR language. MLPolyR is an ML-like functional language whose type system provides type-safe extensibility mechanisms at several levels. After presenting the language, we will show how these extensibility mechanisms can be put to good use in the context of product line engineering. Product line engineering is an emerging software engineering paradigm that aims to manage variations, which originate from successive changes in software.

A review of some problems in global-local stress analysis

NASA Technical Reports Server (NTRS)

Nelson, Richard B.

1989-01-01

The various types of local-global finite-element problems point out the need to develop a new generation of software. First, this new software needs to have a complete analysis capability, encompassing linear and nonlinear analysis of 1-, 2-, and 3-dimensional finite-element models, as well as mixed dimensional models. The software must be capable of treating static and dynamic (vibration and transient response) problems, including the stability effects of initial stress, and the software should be able to treat both elastic and elasto-plastic materials. The software should carry a set of optional diagnostics to assist the program user during model generation in order to help avoid obvious structural modeling errors. In addition, the program software should be well documented so the user has a complete technical reference for each type of element contained in the program library, including information on such topics as the type of numerical integration, use of underintegration, and inclusion of incompatible modes, etc. Some packaged information should also be available to assist the user in building mixed-dimensional models. An important advancement in finite-element software should be in the development of program modularity, so that the user can select from a menu various basic operations in matrix structural analysis.

Software Reviews.

ERIC Educational Resources Information Center

Wulfson, Stephen, Ed.

1987-01-01

Reviews seven computer software programs that can be used in science education programs. Describes courseware which deals with muscles and bones, terminology, classifying animals without backbones, molecular structures, drugs, genetics, and shaping the earth's surface. (TW)

Software Reviews.

ERIC Educational Resources Information Center

Wulfson, Stephen, Ed.

1987-01-01

Provides reviews of six computer software programs designed for use in elementary science education programs. Provides the title, publisher, grade level, and descriptions of courseware on ant farms, drugs, genetics, beachcombing, matter, and test generation. (TW)

Proceedings of Tenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1985-01-01

Papers are presented on the following topics: measurement of software technology, recent studies of the Software Engineering Lab, software management tools, expert systems, error seeding as a program validation technique, software quality assurance, software engineering environments (including knowledge-based environments), the Distributed Computing Design System, and various Ada experiments.

Supporting geoscience with graphical-user-interface Internet tools for the Macintosh

NASA Astrophysics Data System (ADS)

Robin, Bernard

1995-07-01

This paper describes a suite of Macintosh graphical-user-interface (GUI) software programs that can be used in conjunction with the Internet to support geoscience education. These software programs allow science educators to access and retrieve a large body of resources from an increasing number of network sites, taking advantage of the intuitive, simple-to-use Macintosh operating system. With these tools, educators easily can locate, download, and exchange not only text files but also sound resources, video movie clips, and software application files from their desktop computers. Another major advantage of these software tools is that they are available at no cost and may be distributed freely. The following GUI software tools are described including examples of how they can be used in an educational setting: ∗ Eudora—an e-mail program ∗ NewsWatcher—a newsreader ∗ TurboGopher—a Gopher program ∗ Fetch—a software application for easy File Transfer Protocol (FTP) ∗ NCSA Mosaic—a worldwide hypertext browsing program. An explosive growth of online archives currently is underway as new electronic sites are being added continuously to the Internet. Many of these resources may be of interest to science educators who learn they can share not only ASCII text files, but also graphic image files, sound resources, QuickTime movie clips, and hypermedia projects with colleagues from locations around the world. These powerful, yet simple to learn GUI software tools are providing a revolution in how knowledge can be accessed, retrieved, and shared.

Methodology for automating software systems. Task 1 of the foundations for automating software systems

NASA Technical Reports Server (NTRS)

Moseley, Warren

1989-01-01

The early stages of a research program designed to establish an experimental research platform for software engineering are described. Major emphasis is placed on Computer Assisted Software Engineering (CASE). The Poor Man's CASE Tool is based on the Apple Macintosh system, employing available software including Focal Point II, Hypercard, XRefText, and Macproject. These programs are functional in themselves, but through advanced linking are available for operation from within the tool being developed. The research platform is intended to merge software engineering technology with artificial intelligence (AI). In the first prototype of the PMCT, however, the sections of AI are not included. CASE tools assist the software engineer in planning goals, routes to those goals, and ways to measure progress. The method described allows software to be synthesized instead of being written or built.

Development problem analysis of correlation leak detector’s software

NASA Astrophysics Data System (ADS)

Faerman, V. A.; Avramchuk, V. S.; Marukyan, V. M.

2018-05-01

In the article, the practical application and the structure of the correlation leak detectors’ software is studied and the task of its designing is analyzed. In the first part of the research paper, the expediency of the facilities development of correlation leak detectors for the following operating efficiency of public utilities exploitation is shown. The analysis of the functional structure of correlation leak detectors is conducted and its program software tasks are defined. In the second part of the research paper some development steps of the software package – requirement forming, program structure definition and software concept creation – are examined in the context of the usage experience of the hardware-software prototype of correlation leak detector.

University Approaches to Software Copyright and Licensure Policies.

ERIC Educational Resources Information Center

Hawkins, Brian L.

Issues of copyright policy and software licensure at Drexel University that were developed during the introduction of a new microcomputing program are discussed. Channels for software distribution include: individual purchase of externally-produced software, distribution of internally-developed software, institutional licensure, and "read…

A software methodology for compiling quantum programs

NASA Astrophysics Data System (ADS)

Häner, Thomas; Steiger, Damian S.; Svore, Krysta; Troyer, Matthias

2018-04-01

Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of abstraction and their differences and similarities to classical layers of a computer-aided design flow. For each layer of the stack, we discuss the underlying methods for compilation and optimization. Our software methodology facilitates more rapid innovation among quantum algorithm designers, quantum hardware engineers, and experimentalists. It enables scalable compilation of complex quantum algorithms and can be targeted to any specific quantum hardware implementation.

Software Reviews. Programs Worth a Second Look.

ERIC Educational Resources Information Center

Schneider, Roxanne; Eiser, Leslie

1989-01-01

Reviewed are three computer software packages for use in middle/high school classrooms. Included are "MacWrite II," a word-processing program for MacIntosh computers; "Super Story Tree," a word-processing program for Apple and IBM computers; and "Math Blaster Mystery," for IBM, Apple, and Tandy computers. (CW)

Teacher's Guide to SERAPHIM Software I. Chemistry: Experimental Foundations.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the first in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: Experimental Foundations." Program suggestions are…

Teacher's Guide to SERAPHIM Software II. Chemical Principles.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the second in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemical Principles." Program suggestions are arranged in the…

Critical Evaluations and Instructional Potential of Authoring and Titled Program Software.

ERIC Educational Resources Information Center

Reppert, James E.

This paper describes and evaluates the instructional uses of the Claris Works and Ultimedia Tools Series authoring programs and the following titled software programs: CNN Time Capsule: 100 Defining Moments of 1993; Windows Magazine: 1994; Ultimate Digital Studio; Data Trek Manager Series; and Cinemania '95. (AEF)

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

A Structured Model for Software Documentation.

ERIC Educational Resources Information Center

Swigger, Keith

The concept of "structured programming" was developed to facilitate software production, but it has not carried over to documentation design. Two concepts of structure are relevant to user documentation for computer programs. The first is based on programming techniques that emphasize decomposition of tasks into discrete modules, while the second…

Training Programs in Applications Software.

ERIC Educational Resources Information Center

Modianos, Doan T.; Cornwell, Larry W.

1988-01-01

Description of training programs for using business applications software highlights implementing programs for Lotus 1-2-3 and dBASE III Plus. The amount of computer experience of the users and the difference in training methods needed are discussed, and the use of a Macintosh computer for producing notes is explained. (LRW)

Microcomputer Software Programs for Vocational Education.

ERIC Educational Resources Information Center

Rodenstein, Judith, Ed.; Lambert, Roger, Ed.

Over 200 microcomputer software packages applicable to vocational education are listed. Most of the programs are available for the Apple, TRS-80, and Commodore microcomputers. The packages have been reviewed, but have not been formally evaluated. Titles of the programs with names and addresses of the distributors are provided. Telephone numbers…

Virtual Satellite

NASA Technical Reports Server (NTRS)

Hammrs, Stephan R.

2008-01-01

Virtual Satellite (VirtualSat) is a computer program that creates an environment that facilitates the development, verification, and validation of flight software for a single spacecraft or for multiple spacecraft flying in formation. In this environment, enhanced functionality and autonomy of navigation, guidance, and control systems of a spacecraft are provided by a virtual satellite that is, a computational model that simulates the dynamic behavior of the spacecraft. Within this environment, it is possible to execute any associated software, the development of which could benefit from knowledge of, and possible interaction (typically, exchange of data) with, the virtual satellite. Examples of associated software include programs for simulating spacecraft power and thermal- management systems. This environment is independent of the flight hardware that will eventually host the flight software, making it possible to develop the software simultaneously with, or even before, the hardware is delivered. Optionally, by use of interfaces included in VirtualSat, hardware can be used instead of simulated. The flight software, coded in the C or C++ programming language, is compilable and loadable into VirtualSat without any special modifications. Thus, VirtualSat can serve as a relatively inexpensive software test-bed for development test, integration, and post-launch maintenance of spacecraft flight software.

Using the Microcomputer to Teach about Nuclear Energy.

ERIC Educational Resources Information Center

Saltinski, Ronald

1984-01-01

Examines various types of software useful in teaching about nuclear energy. Includes a list of 11 software resources (including program name, source and cost, system requirements, and brief comments about the program). (JN)

Arbitrating Control of Control and Display Units

NASA Technical Reports Server (NTRS)

Sugden, Paul C.

2007-01-01

The ARINC 739 Switch is a computer program that arbitrates control of two multi-function control and display units (MCDUs) between (1) a commercial flight-management computer (FMC) and (2) NASA software used in research on transport aircraft. (MCDUs are the primary interfaces between pilots and FMCs on many commercial aircraft.) This program was recently redesigned into a software library that can be embedded in research application programs. As part of the redesign, this software was combined with software for creating custom pages of information to be displayed on a CDU. This software commands independent switching of the left (pilot s) and right (copilot s) MCDUs. For example, a custom CDU page can control the left CDU while the FMC controls the right CDU. The software uses menu keys to switch control of the CDU between the FMC or a custom CDU page. The software provides an interface that enables custom CDU pages to insert keystrokes into the FMC s CDU input interface. This feature allows the custom CDU pages to manipulate the FMC as if it were a pilot.

Development of Data Processing Software for NBI Spectroscopic Analysis System

NASA Astrophysics Data System (ADS)

Zhang, Xiaodan; Hu, Chundong; Sheng, Peng; Zhao, Yuanzhe; Wu, Deyun; Cui, Qinglong

2015-04-01

A set of data processing software is presented in this paper for processing NBI spectroscopic data. For better and more scientific managment and querying these data, they are managed uniformly by the NBI data server. The data processing software offers the functions of uploading beam spectral original and analytic data to the data server manually and automatically, querying and downloading all the NBI data, as well as dealing with local LZO data. The set software is composed of a server program and a client program. The server software is programmed in C/C++ under a CentOS development environment. The client software is developed under a VC 6.0 platform, which offers convenient operational human interfaces. The network communications between the server and the client are based on TCP. With the help of this set software, the NBI spectroscopic analysis system realizes the unattended automatic operation, and the clear interface also makes it much more convenient to offer beam intensity distribution data and beam power data to operators for operation decision-making. supported by National Natural Science Foundation of China (No. 11075183), the Chinese Academy of Sciences Knowledge Innovation

The software analysis project for the Office of Human Resources

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1994-01-01

There were two major sections of the project for the Office of Human Resources (OHR). The first section was to conduct a planning study to analyze software use with the goal of recommending software purchases and determining whether the need exists for a file server. The second section was analysis and distribution planning for retirement planning computer program entitled VISION provided by NASA Headquarters. The software planning study was developed to help OHR analyze the current administrative desktop computing environment and make decisions regarding software acquisition and implementation. There were three major areas addressed by the study: current environment new software requirements, and strategies regarding the implementation of a server in the Office. To gather data on current environment, employees were surveyed and an inventory of computers were produced. The surveys were compiled and analyzed by the ASEE fellow with interpretation help by OHR staff. New software requirements represented a compilation and analysis of the surveyed requests of OHR personnel. Finally, the information on the use of a server represents research done by the ASEE fellow and analysis of survey data to determine software requirements for a server. This included selection of a methodology to estimate the number of copies of each software program required given current use and estimated growth. The report presents the results of the computing survey, a description of the current computing environment, recommenations for changes in the computing environment, current software needs, management advantages of using a server, and management considerations in the implementation of a server. In addition, detailed specifications were presented for the hardware and software recommendations to offer a complete picture to OHR management. The retirement planning computer program available to NASA employees will aid in long-range retirement planning. The intended audience is the NASA civil service employee with several years until retirement. The employee enters current salary and savings information as well as goals concerning salary at retirement, assumptions on inflation, and the return on investments. The program produces a picture of the employee's retirement income from all sources based on the assumptions entered. A session showing features of the program was conducted for key personnel at the Center. After analysis, it was decided to offer the program through the Learning Center starting in August 1994.

Software reliability: Application of a reliability model to requirements error analysis

NASA Technical Reports Server (NTRS)

Logan, J.

1980-01-01

The application of a software reliability model having a well defined correspondence of computer program properties to requirements error analysis is described. Requirements error categories which can be related to program structural elements are identified and their effect on program execution considered. The model is applied to a hypothetical B-5 requirement specification for a program module.

Software to Promote Young Children's Growth in Literacy: A Comparison of Online and Offline Formats

ERIC Educational Resources Information Center

Wood, Eileen; Grant, Amy K.; Gottardo, Alexandra; Savage, Robert; Evans, Mary Ann

2017-01-01

The primary goal of this research was to extend our understanding of the strengths and weaknesses inherent in online and offline early literacy software programs designed for young learners. A taxonomy of reading skills was used to contrast online software with offline closed system (compact disc) based programs with respect to number of skills…

AdaNET phase 0 support for the AdaNET Dynamic Software Inventory (DSI) management system prototype. Catalog of available reusable software components

NASA Technical Reports Server (NTRS)

Hanley, Lionel

1989-01-01

The Ada Software Repository is a public-domain collection of Ada software and information. The Ada Software Repository is one of several repositories located on the SIMTEL20 Defense Data Network host computer at White Sands Missile Range, and available to any host computer on the network since 26 November 1984. This repository provides a free source for Ada programs and information. The Ada Software Repository is divided into several subdirectories. These directories are organized by topic, and their names and a brief overview of their topics are contained. The Ada Software Repository on SIMTEL20 serves two basic roles: to promote the exchange and use (reusability) of Ada programs and tools (including components) and to promote Ada education.

The Legacy of Space Shuttle Flight Software

NASA Technical Reports Server (NTRS)

Hickey, Christopher J.; Loveall, James B.; Orr, James K.; Klausman, Andrew L.

2011-01-01

The initial goals of the Space Shuttle Program required that the avionics and software systems blaze new trails in advancing avionics system technology. Many of the requirements placed on avionics and software were accomplished for the first time on this program. Examples include comprehensive digital fly-by-wire technology, use of a digital databus for flight critical functions, fail operational/fail safe requirements, complex automated redundancy management, and the use of a high-order software language for flight software development. In order to meet the operational and safety goals of the program, the Space Shuttle software had to be extremely high quality, reliable, robust, reconfigurable and maintainable. To achieve this, the software development team evolved a software process focused on continuous process improvement and defect elimination that consistently produced highly predictable and top quality results, providing software managers the confidence needed to sign each Certificate of Flight Readiness (COFR). This process, which has been appraised at Capability Maturity Model (CMM)/Capability Maturity Model Integration (CMMI) Level 5, has resulted in one of the lowest software defect rates in the industry. This paper will present an overview of the evolution of the Primary Avionics Software System (PASS) project and processes over thirty years, an argument for strong statistical control of software processes with examples, an overview of the success story for identifying and driving out errors before flight, a case study of the few significant software issues and how they were either identified before flight or slipped through the process onto a flight vehicle, and identification of the valuable lessons learned over the life of the project.

Framework for Development of Object-Oriented Software

NASA Technical Reports Server (NTRS)

Perez-Poveda, Gus; Ciavarella, Tony; Nieten, Dan

2004-01-01

The Real-Time Control (RTC) Application Framework is a high-level software framework written in C++ that supports the rapid design and implementation of object-oriented application programs. This framework provides built-in functionality that solves common software development problems within distributed client-server, multi-threaded, and embedded programming environments. When using the RTC Framework to develop software for a specific domain, designers and implementers can focus entirely on the details of the domain-specific software rather than on creating custom solutions, utilities, and frameworks for the complexities of the programming environment. The RTC Framework was originally developed as part of a Space Shuttle Launch Processing System (LPS) replacement project called Checkout and Launch Control System (CLCS). As a result of the framework s development, CLCS software development time was reduced by 66 percent. The framework is generic enough for developing applications outside of the launch-processing system domain. Other applicable high-level domains include command and control systems and simulation/ training systems.

An analysis of integrated science and language arts themes in software at the elementary school level

NASA Astrophysics Data System (ADS)

Libidinsky, Lisa Jill

2002-09-01

There are many demands on the elementary classroom teacher today, such that teachers often do not have the time and resources to instruct in a meaningful manner that would produce effective, real instruction. Subjects are often disjointed and not significant. When teachers instruct using an integrated approach, students learn more efficiently as they see connections in the subjects. Science and language arts, when combined to produce an integrated approach, show positive associations that can enable students to learn real-life connections. In addition, with the onset of technology and the increased usage of technological programs in the schools, teachers can use technology to support an integrated curriculum. When teachers use a combined instructional focus of science, language arts, and technology to produce lessons, students are able to gain knowledge of concepts and skills necessary for appropriate academic growth and development. Given that there are many software programs available to teachers for classroom use, it is imperative that quality software is used for instruction. Using criteria based upon an intensive literature review of integrated instruction in the areas of science and language arts, this study examines science and language arts software programs to determine whether there are science and language arts integrated themes in the software analyzed. Also, this study examines whether more science and language arts integrated themes are present in science or language arts software programs. Overall, this study finds a significant difference between language arts software and science software when looking at integrated themes. This study shows that science software shows integrated themes with language arts more often than does language arts software with science. The findings in this study can serve as a reference point for educators when selecting software that is meaningful and effective in the elementary classroom. Based on this study, it is apparent that there is a need to evaluate software for appropriate use in the classroom in order to promote effective education.

A measurement system for large, complex software programs

NASA Technical Reports Server (NTRS)

Rone, Kyle Y.; Olson, Kitty M.; Davis, Nathan E.

1994-01-01

This paper describes measurement systems required to forecast, measure, and control activities for large, complex software development and support programs. Initial software cost and quality analysis provides the foundation for meaningful management decisions as a project evolves. In modeling the cost and quality of software systems, the relationship between the functionality, quality, cost, and schedule of the product must be considered. This explicit relationship is dictated by the criticality of the software being developed. This balance between cost and quality is a viable software engineering trade-off throughout the life cycle. Therefore, the ability to accurately estimate the cost and quality of software systems is essential to providing reliable software on time and within budget. Software cost models relate the product error rate to the percent of the project labor that is required for independent verification and validation. The criticality of the software determines which cost model is used to estimate the labor required to develop the software. Software quality models yield an expected error discovery rate based on the software size, criticality, software development environment, and the level of competence of the project and developers with respect to the processes being employed.

Software Reviews.

ERIC Educational Resources Information Center

Science Software Quarterly, 1984

1984-01-01

Provides extensive reviews of computer software, examining documentation, ease of use, performance, error handling, special features, and system requirements. Includes statistics, problem-solving (TK Solver), label printing, database management, experimental psychology, Encyclopedia Britannica biology, and DNA-sequencing programs. A program for…

Computer Center: Software Review.

ERIC Educational Resources Information Center

Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

1988-01-01

Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

Fully Automated Pulmonary Lobar Segmentation: Influence of Different Prototype Software Programs onto Quantitative Evaluation of Chronic Obstructive Lung Disease

PubMed Central

Lim, Hyun-ju; Weinheimer, Oliver; Wielpütz, Mark O.; Dinkel, Julien; Hielscher, Thomas; Gompelmann, Daniela; Kauczor, Hans-Ulrich; Heussel, Claus Peter

2016-01-01

Objectives Surgical or bronchoscopic lung volume reduction (BLVR) techniques can be beneficial for heterogeneous emphysema. Post-processing software tools for lobar emphysema quantification are useful for patient and target lobe selection, treatment planning and post-interventional follow-up. We aimed to evaluate the inter-software variability of emphysema quantification using fully automated lobar segmentation prototypes. Material and Methods 66 patients with moderate to severe COPD who underwent CT for planning of BLVR were included. Emphysema quantification was performed using 2 modified versions of in-house software (without and with prototype advanced lung vessel segmentation; programs 1 [YACTA v.2.3.0.2] and 2 [YACTA v.2.4.3.1]), as well as 1 commercial program 3 [Pulmo3D VA30A_HF2] and 1 pre-commercial prototype 4 [CT COPD ISP ver7.0]). The following parameters were computed for each segmented anatomical lung lobe and the whole lung: lobar volume (LV), mean lobar density (MLD), 15th percentile of lobar density (15th), emphysema volume (EV) and emphysema index (EI). Bland-Altman analysis (limits of agreement, LoA) and linear random effects models were used for comparison between the software. Results Segmentation using programs 1, 3 and 4 was unsuccessful in 1 (1%), 7 (10%) and 5 (7%) patients, respectively. Program 2 could analyze all datasets. The 53 patients with successful segmentation by all 4 programs were included for further analysis. For LV, program 1 and 4 showed the largest mean difference of 72 ml and the widest LoA of [-356, 499 ml] (p<0.05). Program 3 and 4 showed the largest mean difference of 4% and the widest LoA of [-7, 14%] for EI (p<0.001). Conclusions Only a single software program was able to successfully analyze all scheduled data-sets. Although mean bias of LV and EV were relatively low in lobar quantification, ranges of disagreement were substantial in both of them. For longitudinal emphysema monitoring, not only scanning protocol but also quantification software needs to be kept constant. PMID:27029047

Microcomputer software development facilities

NASA Technical Reports Server (NTRS)

Gorman, J. S.; Mathiasen, C.

1980-01-01

A more efficient and cost effective method for developing microcomputer software is to utilize a host computer with high-speed peripheral support. Application programs such as cross assemblers, loaders, and simulators are implemented in the host computer for each of the microcomputers for which software development is a requirement. The host computer is configured to operate in a time share mode for multiusers. The remote terminals, printers, and down loading capabilities provided are based on user requirements. With this configuration a user, either local or remote, can use the host computer for microcomputer software development. Once the software is developed (through the code and modular debug stage) it can be downloaded to the development system or emulator in a test area where hardware/software integration functions can proceed. The microcomputer software program sources reside in the host computer and can be edited, assembled, loaded, and then downloaded as required until the software development project has been completed.

The Particle-in-Cell and Kinetic Simulation Software Center

NASA Astrophysics Data System (ADS)

Mori, W. B.; Decyk, V. K.; Tableman, A.; Fonseca, R. A.; Tsung, F. S.; Hu, Q.; Winjum, B. J.; An, W.; Dalichaouch, T. N.; Davidson, A.; Hildebrand, L.; Joglekar, A.; May, J.; Miller, K.; Touati, M.; Xu, X. L.

2017-10-01

The UCLA Particle-in-Cell and Kinetic Simulation Software Center (PICKSC) aims to support an international community of PIC and plasma kinetic software developers, users, and educators; to increase the use of this software for accelerating the rate of scientific discovery; and to be a repository of knowledge and history for PIC. We discuss progress towards making available and documenting illustrative open-source software programs and distinct production programs; developing and comparing different PIC algorithms; coordinating the development of resources for the educational use of kinetic software; and the outcomes of our first sponsored OSIRIS users workshop. We also welcome input and discussion from anyone interested in using or developing kinetic software, in obtaining access to our codes, in collaborating, in sharing their own software, or in commenting on how PICKSC can better serve the DPP community. Supported by NSF under Grant ACI-1339893 and by the UCLA Institute for Digital Research and Education.

Real-Time Monitoring of Scada Based Control System for Filling Process

NASA Astrophysics Data System (ADS)

Soe, Aung Kyaw; Myint, Aung Naing; Latt, Maung Maung; Theingi

2008-10-01

This paper is a design of real-time monitoring for filling system using Supervisory Control and Data Acquisition (SCADA). The monitoring of production process is described in real-time using Visual Basic.Net programming under Visual Studio 2005 software without SCADA software. The software integrators are programmed to get the required information for the configuration screens. Simulation of components is expressed on the computer screen using parallel port between computers and filling devices. The programs of real-time simulation for the filling process from the pure drinking water industry are provided.

Software development to support sensor control of robot arc welding

NASA Technical Reports Server (NTRS)

Silas, F. R., Jr.

1986-01-01

The development of software for a Digital Equipment Corporation MINC-23 Laboratory Computer to provide functions of a workcell host computer for Space Shuttle Main Engine (SSME) robotic welding is documented. Routines were written to transfer robot programs between the MINC and an Advanced Robotic Cyro 750 welding robot. Other routines provide advanced program editing features while additional software allows communicatin with a remote computer aided design system. Access to special robot functions were provided to allow advanced control of weld seam tracking and process control for future development programs.

Applying program comprehension techniques to improve software inspections

NASA Technical Reports Server (NTRS)

Rifkin, Stan; Deimel, Lionel

1994-01-01

Software inspections are widely regarded as a cost-effective mechanism for removing defects in software, though performing them does not always reduce the number of customer-discovered defects. We present a case study in which an attempt was made to reduce such defects through inspection training that introduced program comprehension ideas. The training was designed to address the problem of understanding the artifact being reviewed, as well as other perceived deficiencies of the inspection process itself. Measures, both formal and informal, suggest that explicit training in program understanding may improve inspection effectiveness.

A learning apprentice for software parts composition

NASA Technical Reports Server (NTRS)

Allen, Bradley P.; Holtzman, Peter L.

1987-01-01

An overview of the knowledge acquisition component of the Bauhaus, a prototype computer aided software engineering (CASE) workstation for the development of domain-specific automatic programming systems (D-SAPS) is given. D-SAPS use domain knowledge in the refinement of a description of an application program into a compilable implementation. The approach to the construction of D-SAPS was to automate the process of refining a description of a program, expressed in an object-oriented domain language, into a configuration of software parts that implement the behavior of the domain objects.

Microcomputer technology applications: Charger and regulator software for a breadboard programmable power processor

NASA Technical Reports Server (NTRS)

Green, D. M.

1978-01-01

Software programs are described, one which implements a voltage regulation function, and one which implements a charger function with peak-power tracking of its input. The software, written in modular fashion, is intended as a vehicle for further experimentation with the P-3 system. A control teleprinter allows an operator to make parameter modifications to the control algorithm during experiments. The programs require 3K ROM and 2K ram each. User manuals for each system are included as well as a third program for simple I/O control.

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, John C.

1987-01-01

Multi-version or N-version programming is proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. These versions are executed in parallel in the application environment; each receives identical inputs and each produces its version of the required outputs. The outputs are collected by a voter and, in principle, they should all be the same. In practice there may be some disagreement. If this occurs, the results of the majority are taken to be the correct output, and that is the output used by the system. A total of 27 programs were produced. Each of these programs was then subjected to one million randomly-generated test cases. The experiment yielded a number of programs containing faults that are useful for general studies of software reliability as well as studies of N-version programming. Fault tolerance through data diversity and analytic models of comparison testing are discussed.

Program Model Checking as a New Trend

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Visser, Willem; Clancy, Daniel (Technical Monitor)

2002-01-01

This paper introduces a special section of STTT (International Journal on Software Tools for Technology Transfer) containing a selection of papers that were presented at the 7th International SPIN workshop, Stanford, August 30 - September 1, 2000. The workshop was named SPIN Model Checking and Software Verification, with an emphasis on model checking of programs. The paper outlines the motivation for stressing software verification, rather than only design and model verification, by presenting the work done in the Automated Software Engineering group at NASA Ames Research Center within the last 5 years. This includes work in software model checking, testing like technologies and static analysis.

Teacher's Guide to SERAPHIM Software III. Modern Chemistry.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the third in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Modern Chemistry." Program suggestions are arranged in the same…

Teacher's Guide to SERAPHIM Software IV Chemistry: A Modern Course.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fourth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: A Modern Course." Program suggestions are arranged…

Teacher's Guide to SERAPHIM Software VI. Chemistry: The Study of Matter.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the sixth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Study of Matter." Program suggestions are…

Methodology for Software Reliability Prediction. Volume 2.

DTIC Science & Technology

1987-11-01

The overall acquisition ,z program shall include the resources, schedule, management, structure , and controls necessary to ensure that specified AD...Independent Verification/Validation - Programming Team Structure - Educational Level of Team Members - Experience Level of Team Members * Methods Used...Prediction or Estimation Parameter Supported: Software - Characteristics 3. Objectives: Structured programming studies and Government Ur.’.. procurement

Teacher's Guide to SERAPHIM Software V. Chemistry: The Central Science.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fifth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Central Science." Program suggestions are…

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or computer software will be generated during performance of contracts under the SBIR program. (b) Under the clause at 252.227-7018, the Government obtains SBIR data rights in technical data and computer software...

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or computer software will be generated during performance of contracts under the SBIR program. (b) Under the clause at 252.227-7018, the Government obtains SBIR data rights in technical data and computer software...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (JUN 1995...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (FEB 2014...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAR 2011...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAY 2013...

Form versus Function: Using Technology to Develop Individualized Education Programs for Students with Disabilities

ERIC Educational Resources Information Center

Wilson, Gloria Lodato; Michaels, Craig A.; Margolis, Howard

2005-01-01

This article discusses the use of IEP software applications from the perspectives of form (i.e., legally correct documents) and function (i.e., educationally appropriate individualized programs). The article provides an overview of the basic components of two fairly comprehensive IEP software programs and discusses the general strengths and…

Interactive Microcomputer Videotape Software for Vocational Agriculture Programs in Secondary Schools. Final Report.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock.

The purpose of the project described in this report was to investigate the feasibility of interactive microcomputer/videotape software for use in Texas vocational agriculture programs. An extensive literature review was conducted to determine the value of videotaped and interactive videotaped lessons and to check what equipment and programs were…

Poetry in Programs: A Brief Examination of Software Aesthetics, Including Observations on the History of Programming Styles and Speculations on Post-object Programming

NASA Technical Reports Server (NTRS)

Filman, Robert E.

2004-01-01

This viewgraph presentation provides samples of computer code which have characteristics of poetic verse, and addresses the theoretical underpinnings of artistic coding, as well as how computer language influences software style, and the possible style of future coding.

Empowering Teachers to Create Educational Software: A Constructivist Approach Utilizing Etoys, Pair Programming and Cognitive Apprenticeship

ERIC Educational Resources Information Center

Lee, Young-Jin

2011-01-01

This study investigates whether a visual programming environment called Etoys could enable teachers to create software applications meeting their own instructional needs. Twenty-four teachers who participated in the study successfully developed their own educational computer programs in the educational technology course employing cognitive…

Lean and Efficient Software: Whole-Program Optimization of Executables

DTIC Science & Technology

2015-09-30

libraries. Many levels of library interfaces—where some libraries are dynamically linked and some are provided in binary form only—significantly limit...software at build time. The opportunity: Our objective in this project is to substantially improve the performance, size, and robustness of binary ...executables by using static and dynamic binary program analysis techniques to perform whole-program optimization directly on compiled programs

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1987-01-01

The Software Automation, Generation and Administration (SAGA) project is investigating the design and construction of practical software engineering environments for developing and maintaining aerospace systems and applications software. The research includes the practical organization of the software lifecycle, configuration management, software requirements specifications, executable specifications, design methodologies, programming, verification, validation and testing, version control, maintenance, the reuse of software, software libraries, documentation, and automated management.

From Classroom to Computer Screen: NWLP Software. A Set of Computerized Garment-Related Bilingual (English and Chinese) Literacy Lessons.

ERIC Educational Resources Information Center

Whu, Lin Fai; Zhang, Ai Ling

This document describes how National Workplace Literacy Program (NWLP) software was developed for Chinese garment workers in New York City. First, it discusses the goal of the workplace literacy program and the nature of the population served. Then, it indicates how NWLP software was designed to supplement the NWLP curriculum and to reinforce the…

Repository-based software engineering program

NASA Technical Reports Server (NTRS)

Wilson, James

1992-01-01

The activities performed during September 1992 in support of Tasks 01 and 02 of the Repository-Based Software Engineering Program are outlined. The recommendations and implementation strategy defined at the September 9-10 meeting of the Reuse Acquisition Action Team (RAAT) are attached along with the viewgraphs and reference information presented at the Institute for Defense Analyses brief on legal and patent issues related to software reuse.

The systematic evolution of a NASA software technology, Appendix C

NASA Technical Reports Server (NTRS)

Deregt, M. P.; Dulfer, J. E.

1972-01-01

A long range program is described whose ultimate purpose is to make possible the production of software in NASA within predictable schedule and budget constraints and with major characteristics such as size, run-time, and correctness predictable within reasonable tolerances. As part of the program a pilot NASA computer center will be chosen to apply software development and management techniques systematically and determine a set which is effective. The techniques will be developed by a Technology Group, which will guide the pilot project and be responsible for its success. The application of the technology will involve a sequence of NASA programming tasks graduated from simpler ones at first to complex systems in late phases of the project. The evaluation of the technology will be made by monitoring the operation of the software at the users' installations. In this way a coherent discipline for software design, production maintenance, and management will be evolved.

Obtaining Valid Safety Data for Software Safety Measurement and Process Improvement

NASA Technical Reports Server (NTRS)

Basili, Victor r.; Zelkowitz, Marvin V.; Layman, Lucas; Dangle, Kathleen; Diep, Madeline

2010-01-01

We report on a preliminary case study to examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Our goal is to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. Our purpose was two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to identify potential risks due to incorrect application of the safety process, deficiencies in the safety process, or the lack of a defined process. One early outcome of this work was to show that there are structural deficiencies in collecting valid safety data that make software safety different from hardware safety. In our conclusions we present some of these deficiencies.

Automated Reuse of Scientific Subroutine Libraries through Deductive Synthesis

NASA Technical Reports Server (NTRS)

Lowry, Michael R.; Pressburger, Thomas; VanBaalen, Jeffrey; Roach, Steven

1997-01-01

Systematic software construction offers the potential of elevating software engineering from an art-form to an engineering discipline. The desired result is more predictable software development leading to better quality and more maintainable software. However, the overhead costs associated with the formalisms, mathematics, and methods of systematic software construction have largely precluded their adoption in real-world software development. In fact, many mainstream software development organizations, such as Microsoft, still maintain a predominantly oral culture for software development projects; which is far removed from a formalism-based culture for software development. An exception is the limited domain of safety-critical software, where the high-assuiance inherent in systematic software construction justifies the additional cost. We believe that systematic software construction will only be adopted by mainstream software development organization when the overhead costs have been greatly reduced. Two approaches to cost mitigation are reuse (amortizing costs over many applications) and automation. For the last four years, NASA Ames has funded the Amphion project, whose objective is to automate software reuse through techniques from systematic software construction. In particular, deductive program synthesis (i.e., program extraction from proofs) is used to derive a composition of software components (e.g., subroutines) that correctly implements a specification. The construction of reuse libraries of software components is the standard software engineering solution for improving software development productivity and quality.

Real time software for a heat recovery steam generator control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valdes, R.; Delgadillo, M.A.; Chavez, R.

1995-12-31

This paper is addressed to the development and successful implementation of a real time software for the Heat Recovery Steam Generator (HRSG) control system of a Combined Cycle Power Plant. The real time software for the HRSG control system physically resides in a Control and Acquisition System (SAC) which is a component of a distributed control system (DCS). The SAC is a programmable controller. The DCS installed at the Gomez Palacio power plant in Mexico accomplishes the functions of logic, analog and supervisory control. The DCS is based on microprocessors and the architecture consists of workstations operating as a Man-Machinemore » Interface (MMI), linked to SAC controllers by means of a communication system. The HRSG real time software is composed of an operating system, drivers, dedicated computer program and application computer programs. The operating system used for the development of this software was the MultiTasking Operating System (MTOS). The application software developed at IIE for the HRSG control system basically consisted of a set of digital algorithms for the regulation of the main process variables at the HRSG. By using the multitasking feature of MTOS, the algorithms are executed pseudo concurrently. In this way, the applications programs continuously use the resources of the operating system to perform their functions through a uniform service interface. The application software of the HRSG consist of three tasks, each of them has dedicated responsibilities. The drivers were developed for the handling of hardware resources of the SAC controller which in turn allows the signals acquisition and data communication with a MMI. The dedicated programs were developed for hardware diagnostics, task initializations, access to the data base and fault tolerance. The application software and the dedicated software for the HRSG control system was developed using C programming language due to compactness, portability and efficiency.« less

Reviews, Software.

ERIC Educational Resources Information Center

Science Teacher, 1988

1988-01-01

Reviews two software programs for Apple series computers. Includes "Orbital Mech," a basic planetary orbital simulation for the Macintosh, and "START: Stimulus and Response Tools for Experiments in Memory, Learning, Cognition, and Perception," a program that demonstrates basic psychological principles and experiments. (CW)

Journal of Chemical Education: Software.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1988

1988-01-01

Describes a chemistry software program that emulates a modern binary gradient HPLC system with reversed phase column behavior. Allows for solvent selection, adjustment of gradient program, column selection, detectory selection, handling of computer sample data, and sample preparation. (MVL)

Programming support environment issues in the Byron programming environment

NASA Technical Reports Server (NTRS)

Larsen, Matthew J.

1986-01-01

Issues are discussed which programming support environments need to address in order to successfully support software engineering. These concerns are divided into two categories. The first category, issues of how software development is supported by an environment, includes support of the full life cycle, methodology flexibility, and support of software reusability. The second category contains issues of how environments should operate, such as tool reusability and integration, user friendliness, networking, and use of a central data base. This discussion is followed by an examination of Byron, an Ada based programming support environment developed at Intermetrics, focusing on the solutions Byron offers to these problems, including the support provided for software reusability and the test and maintenance phases of the life cycle. The use of Byron in project development is described briefly, and some suggestions for future Byron tools and user written tools are presented.

Comparing the Impacts of Tutorial and Edutainment Software Programs on Students' Achievements, Misconceptions, and Attitudes towards Biology

NASA Astrophysics Data System (ADS)

Kara, Yılmaz; Yeşilyurt, Selami

2008-02-01

The purpose of this study was to investigate the effects of tutorial and edutainment design of instructional software programs related to the "cell division" topic on student achievements, misconceptions and attitudes. An experimental research design including the cell division achievement test (CAT), the cell division concept test (CCT) and biology attitude scale (BAS) was applied at the beginning and at the end of the research. After the treatment, general achievement in CAT increased in favor of experimental groups. Instructional software programs also had the positive effect to the awareness of students' understandings to the general functions of mitosis and meiosis. However, the current study revealed that there were still some misconceptions in the experimental groups even after the treatment. It was also noticed that only using edutainment software program significantly changed students' attitudes towards biology.

Ada education in a software life-cycle context

NASA Technical Reports Server (NTRS)

Clough, Anne J.

1986-01-01

Some of the experience gained from a comprehensive educational program undertaken at The Charles Stark Draper Lab. to introduce the Ada language and to transition modern software engineering technology into the development of Ada and non-Ada applications is described. Initially, a core group, which included manager, engineers and programmers, received training in Ada. An Ada Office was established to assume the major responsibility for training, evaluation, acquisition and benchmarking of tools, and consultation on Ada projects. As a first step in this process, and in-house educational program was undertaken to introduce Ada to the Laboratory. Later, a software engineering course was added to the educational program as the need to address issues spanning the entire software life cycle became evident. Educational efforts to date are summarized, with an emphasis on the educational approach adopted. Finally, lessons learned in administering this program are addressed.

Experience Paper: Software Engineering and Community Codes Track in ATPESC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubey, Anshu; Riley, Katherine M.

Argonne Training Program in Extreme Scale Computing (ATPESC) was started by the Argonne National Laboratory with the objective of expanding the ranks of better prepared users of high performance computing (HPC) machines. One of the unique aspects of the program was inclusion of software engineering and community codes track. The inclusion was motivated by the observation that the projects with a good scientific and software process were better able to meet their scientific goals. In this paper we present our experience of running the software track from the beginning of the program until now. We discuss the motivations, the reception,more » and the evolution of the track over the years. We welcome discussion and input from the community to enhance the track in ATPESC, and also to facilitate inclusion of similar tracks in other HPC oriented training programs.« less

System support software for the Space Ultrareliable Modular Computer (SUMC)

NASA Technical Reports Server (NTRS)

Hill, T. E.; Hintze, G. C.; Hodges, B. C.; Austin, F. A.; Buckles, B. P.; Curran, R. T.; Lackey, J. D.; Payne, R. E.

1974-01-01

The highly transportable programming system designed and implemented to support the development of software for the Space Ultrareliable Modular Computer (SUMC) is described. The SUMC system support software consists of program modules called processors. The initial set of processors consists of the supervisor, the general purpose assembler for SUMC instruction and microcode input, linkage editors, an instruction level simulator, a microcode grid print processor, and user oriented utility programs. A FORTRAN 4 compiler is undergoing development. The design facilitates the addition of new processors with a minimum effort and provides the user quasi host independence on the ground based operational software development computer. Additional capability is provided to accommodate variations in the SUMC architecture without consequent major modifications in the initial processors.

Application-Program-Installer Builder

NASA Technical Reports Server (NTRS)

Wolgast, Paul; Demore, Martha; Lowik, Paul

2007-01-01

A computer program builds application programming interfaces (APIs) and related software components for installing and uninstalling application programs in any of a variety of computers and operating systems that support the Java programming language in its binary form. This program is partly similar in function to commercial (e.g., Install-Shield) software. This program is intended to enable satisfaction of a quasi-industry-standard set of requirements for a set of APIs that would enable such installation and uninstallation and that would avoid the pitfalls that are commonly encountered during installation of software. The requirements include the following: 1) Properly detecting prerequisites to an application program before performing the installation; 2) Properly registering component requirements; 3) Correctly measuring the required hard-disk space, including accounting for prerequisite components that have already been installed; and 4) Correctly uninstalling an application program. Correct uninstallation includes (1) detecting whether any component of the program to be removed is required by another program, (2) not removing that component, and (3) deleting references to requirements of the to-be-removed program for components of other programs so that those components can be properly removed at a later time.

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Gibbs, Norman

1988-01-01

The goals of the Software Engineering Institute's Education Program are as follows: to increase the number of highly qualified software engineers--new software engineers and existing practitioners; and to be the leading center of expertise for software engineering education and training. A discussion of these goals is presented in vugraph form.

22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software, and systems.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., parts, firmware, software, and systems. 121.8 Section 121.8 Foreign Relations DEPARTMENT OF STATE...-items, components, accessories, attachments, parts, firmware, software, and systems. (a) An end-item is.... Firmware includes but is not limited to circuits into which software has been programmed. (f) Software...

22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., parts, firmware, software and systems. 121.8 Section 121.8 Foreign Relations DEPARTMENT OF STATE...-items, components, accessories, attachments, parts, firmware, software and systems. (a) An end-item is.... Firmware includes but is not limited to circuits into which software has been programmed. (f) Software...

22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., parts, firmware, software and systems. 121.8 Section 121.8 Foreign Relations DEPARTMENT OF STATE...-items, components, accessories, attachments, parts, firmware, software and systems. (a) An end-item is.... Firmware includes but is not limited to circuits into which software has been programmed. (f) Software...

22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., parts, firmware, software and systems. 121.8 Section 121.8 Foreign Relations DEPARTMENT OF STATE...-items, components, accessories, attachments, parts, firmware, software and systems. (a) An end-item is.... Firmware includes but is not limited to circuits into which software has been programmed. (f) Software...

22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., parts, firmware, software and systems. 121.8 Section 121.8 Foreign Relations DEPARTMENT OF STATE...-items, components, accessories, attachments, parts, firmware, software and systems. (a) An end-item is.... Firmware includes but is not limited to circuits into which software has been programmed. (f) Software...

Understanding Acceptance of Software Metrics--A Developer Perspective

ERIC Educational Resources Information Center

Umarji, Medha

2009-01-01

Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

A comprehensive literature review of haplotyping software and methods for use with unrelated individuals.

PubMed

Salem, Rany M; Wessel, Jennifer; Schork, Nicholas J

2005-03-01

Interest in the assignment and frequency analysis of haplotypes in samples of unrelated individuals has increased immeasurably as a result of the emphasis placed on haplotype analyses by, for example, the International HapMap Project and related initiatives. Although there are many available computer programs for haplotype analysis applicable to samples of unrelated individuals, many of these programs have limitations and/or very specific uses. In this paper, the key features of available haplotype analysis software for use with unrelated individuals, as well as pooled DNA samples from unrelated individuals, are summarised. Programs for haplotype analysis were identified through keyword searches on PUBMED and various internet search engines, a review of citations from retrieved papers and personal communications, up to June 2004. Priority was given to functioning computer programs, rather than theoretical models and methods. The available software was considered in light of a number of factors: the algorithm(s) used, algorithm accuracy, assumptions, the accommodation of genotyping error, implementation of hypothesis testing, handling of missing data, software characteristics and web-based implementations. Review papers comparing specific methods and programs are also summarised. Forty-six haplotyping programs were identified and reviewed. The programs were divided into two groups: those designed for individual genotype data (a total of 43 programs) and those designed for use with pooled DNA samples (a total of three programs). The accuracy of programs using various criteria are assessed and the programs are categorised and discussed in light of: algorithm and method, accuracy, assumptions, genotyping error, hypothesis testing, missing data, software characteristics and web implementation. Many available programs have limitations (eg some cannot accommodate missing data) and/or are designed with specific tasks in mind (eg estimating haplotype frequencies rather than assigning most likely haplotypes to individuals). It is concluded that the selection of an appropriate haplotyping program for analysis purposes should be guided by what is known about the accuracy of estimation, as well as by the limitations and assumptions built into a program.

Automated verification of flight software. User's manual

NASA Technical Reports Server (NTRS)

Saib, S. H.

1982-01-01

(Automated Verification of Flight Software), a collection of tools for analyzing source programs written in FORTRAN and AED is documented. The quality and the reliability of flight software are improved by: (1) indented listings of source programs, (2) static analysis to detect inconsistencies in the use of variables and parameters, (3) automated documentation, (4) instrumentation of source code, (5) retesting guidance, (6) analysis of assertions, (7) symbolic execution, (8) generation of verification conditions, and (9) simplification of verification conditions. Use of AVFS in the verification of flight software is described.

Activity-Centric Approach to Distributed Programming

NASA Technical Reports Server (NTRS)

Levy, Renato; Satapathy, Goutam; Lang, Jun

2004-01-01

The first phase of an effort to develop a NASA version of the Cybele software system has been completed. To give meaning to even a highly abbreviated summary of the modifications to be embodied in the NASA version, it is necessary to present the following background information on Cybele: Cybele is a proprietary software infrastructure for use by programmers in developing agent-based application programs [complex application programs that contain autonomous, interacting components (agents)]. Cybele provides support for event handling from multiple sources, multithreading, concurrency control, migration, and load balancing. A Cybele agent follows a programming paradigm, called activity-centric programming, that enables an abstraction over system-level thread mechanisms. Activity centric programming relieves application programmers of the complex tasks of thread management, concurrency control, and event management. In order to provide such functionality, activity-centric programming demands support of other layers of software. This concludes the background information. In the first phase of the present development, a new architecture for Cybele was defined. In this architecture, Cybele follows a modular service-based approach to coupling of the programming and service layers of software architecture. In a service-based approach, the functionalities supported by activity-centric programming are apportioned, according to their characteristics, among several groups called services. A well-defined interface among all such services serves as a path that facilitates the maintenance and enhancement of such services without adverse effect on the whole software framework. The activity-centric application-program interface (API) is part of a kernel. The kernel API calls the services by use of their published interface. This approach makes it possible for any application code written exclusively under the API to be portable for any configuration of Cybele.

Measurement of the area of venous ulcers using two software programs 1

PubMed Central

Eberhardt, Thaís Dresch; de Lima, Suzinara Beatriz Soares; Lopes, Luis Felipe Dias; Borges, Eline de Lima; Weiller, Teresinha Heck; da Fonseca, Graziele Gorete Portella

2016-01-01

ABSTRACT Objective: to compare the measurement area of venous ulcers using AutoCAD(r) and Image Tool software. Method: this was an assessment of reproducibility tests conducted in a angiology clinic of a university hospital. Data were collected from 21 patients with venous ulcers, in the period from March to July of 2015, using a collection form and photograph of wounds. Five nurses (evaluators) of the hospital skin wound study group participated. The wounds were measured using both software programs. Data were analyzed using intraclass correlation coefficient, concordance correlation coefficient and Bland-Altman analysis. The study met the ethical aspects in accordance with current legislation. Results: the size of ulcers varied widely, however, without significant difference between the measurements; an excellent intraclass and concordance correlation was found between both software programs, which seem to be more accurate when measuring a wound area >10 cm². Conclusion: the use of both software programs is appropriate for measurement of venous ulcers, appearing to be more accurate when used to measure a wound area > 10 cm². PMID:27992028

Fuzzy Logic Engine

NASA Technical Reports Server (NTRS)

Howard, Ayanna

2005-01-01

The Fuzzy Logic Engine is a software package that enables users to embed fuzzy-logic modules into their application programs. Fuzzy logic is useful as a means of formulating human expert knowledge and translating it into software to solve problems. Fuzzy logic provides flexibility for modeling relationships between input and output information and is distinguished by its robustness with respect to noise and variations in system parameters. In addition, linguistic fuzzy sets and conditional statements allow systems to make decisions based on imprecise and incomplete information. The user of the Fuzzy Logic Engine need not be an expert in fuzzy logic: it suffices to have a basic understanding of how linguistic rules can be applied to the user's problem. The Fuzzy Logic Engine is divided into two modules: (1) a graphical-interface software tool for creating linguistic fuzzy sets and conditional statements and (2) a fuzzy-logic software library for embedding fuzzy processing capability into current application programs. The graphical- interface tool was developed using the Tcl/Tk programming language. The fuzzy-logic software library was written in the C programming language.

Software Assurance Challenges for the Commercial Crew Program

NASA Technical Reports Server (NTRS)

Cuyno, Patrick; Malnick, Kathy D.; Schaeffer, Chad E.

2015-01-01

This paper will provide a description of some of the challenges NASA is facing in providing software assurance within the new commercial space services paradigm, namely with the Commercial Crew Program (CCP). The CCP will establish safe, reliable, and affordable access to the International Space Station (ISS) by purchasing a ride from commercial companies. The CCP providers have varying experience with software development in safety-critical space systems. NASA's role in providing effective software assurance support to the CCP providers is critical to the success of CCP. These challenges include funding multiple vehicles that execute in parallel and have different rules of engagement, multiple providers with unique proprietary concerns, providing equivalent guidance to all providers, permitting alternates to NASA standards, and a large number of diverse stakeholders. It is expected that these challenges will exist in future programs, especially if the CCP paradigm proves successful. The proposed CCP approach to address these challenges includes a risk-based assessment with varying degrees of engagement and a distributed assurance model. This presentation will describe NASA IV&V Program's software assurance support and responses to these challenges.

Artificial intelligence and the space station software support environment

NASA Technical Reports Server (NTRS)

Marlowe, Gilbert

1986-01-01

In a software system the size of the Space Station Software Support Environment (SSE), no one software development or implementation methodology is presently powerful enough to provide safe, reliable, maintainable, cost effective real time or near real time software. In an environment that must survive one of the most harsh and long life times, software must be produced that will perform as predicted, from the first time it is executed to the last. Many of the software challenges that will be faced will require strategies borrowed from Artificial Intelligence (AI). AI is the only development area mentioned as an example of a legitimate reason for a waiver from the overall requirement to use the Ada programming language for software development. The limits are defined of the applicability of the Ada language Ada Programming Support Environment (of which the SSE is a special case), and software engineering to AI solutions by describing a scenario that involves many facets of AI methodologies.

Multibiodose radiation emergency triage categorization software.

PubMed

Ainsbury, Elizabeth A; Barnard, Stephen; Barrios, Lleonard; Fattibene, Paola; de Gelder, Virginie; Gregoire, Eric; Lindholm, Carita; Lloyd, David; Nergaard, Inger; Rothkamm, Kai; Romm, Horst; Scherthan, Harry; Thierens, Hubert; Vandevoorde, Charlot; Woda, Clemens; Wojcik, Andrzej

2014-07-01

In this note, the authors describe the MULTIBIODOSE software, which has been created as part of the MULTIBIODOSE project. The software enables doses estimated by networks of laboratories, using up to five retrospective (biological and physical) assays, to be combined to give a single estimate of triage category for each individual potentially exposed to ionizing radiation in a large scale radiation accident or incident. The MULTIBIODOSE software has been created in Java. The usage of the software is based on the MULTIBIODOSE Guidance: the program creates a link to a single SQLite database for each incident, and the database is administered by the lead laboratory. The software has been tested with Java runtime environment 6 and 7 on a number of different Windows, Mac, and Linux systems, using data from a recent intercomparison exercise. The Java program MULTIBIODOSE_1.0.jar is freely available to download from http://www.multibiodose.eu/software or by contacting the software administrator: MULTIBIODOSE-software@gmx.com.

Use of notebook computers for third-year surgical students.

PubMed

Prystowsky, J B; Hassan, M B; Nahrwold, D L

1996-08-01

Computer-aided instruction has become increasingly popular in medical education. Notebook computers (NCs) are attractive, convenient microcomputers. We hypothesized that use of NCs by third-year surgical students would enhance their performance of educational activities. During the 1994-1995 academic year 25 student volunteers used NCs during the surgery clerkship. NC software included questions for self-examination, anatomy self-instruction program, word processing and electronic mail (e-mail) for recording and sending history and physicals (H & Ps) to faculty for review, and MEDLINE search software. Identical software was available to all students at on-campus computer centers. All students were asked to record the number of hours that they used the self-examination and anatomy programs, number of H & Ps performed and reviewed by faculty, and number of literature searches performed. NC users were interviewed regarding the value of NC use and their rating of software programs. NC users (n = 25) used the self-examination and anatomy programs more often, performed more literature searches, and had a greater percentage of their H & Ps reviewed by faculty compared with non-NC users (n = 143) (p < 0.05 for all outcomes). Most NC users agreed that NC use was enjoyable and valuable, and they believed that all students should have NCs during the surgery clerkship. Students rated software in order of preference: e-mail > self-examination > MEDLINE search > anatomy program. NC use enhanced performance of educational activities in the surgery clerkship. Effort toward developing educational software for surgical students is warranted because students are likely to use such programs.

Another Program For Generating Interactive Graphics

NASA Technical Reports Server (NTRS)

Costenbader, Jay; Moleski, Walt; Szczur, Martha; Howell, David; Engelberg, Norm; Li, Tin P.; Misra, Dharitri; Miller, Philip; Neve, Leif; Wolf, Karl;

Visual gene developer: a fully programmable bioinformatics software for synthetic gene optimization.

PubMed

Jung, Sang-Kyu; McDonald, Karen

2011-08-16

Direct gene synthesis is becoming more popular owing to decreases in gene synthesis pricing. Compared with using natural genes, gene synthesis provides a good opportunity to optimize gene sequence for specific applications. In order to facilitate gene optimization, we have developed a stand-alone software called Visual Gene Developer. The software not only provides general functions for gene analysis and optimization along with an interactive user-friendly interface, but also includes unique features such as programming capability, dedicated mRNA secondary structure prediction, artificial neural network modeling, network & multi-threaded computing, and user-accessible programming modules. The software allows a user to analyze and optimize a sequence using main menu functions or specialized module windows. Alternatively, gene optimization can be initiated by designing a gene construct and configuring an optimization strategy. A user can choose several predefined or user-defined algorithms to design a complicated strategy. The software provides expandable functionality as platform software supporting module development using popular script languages such as VBScript and JScript in the software programming environment. Visual Gene Developer is useful for both researchers who want to quickly analyze and optimize genes, and those who are interested in developing and testing new algorithms in bioinformatics. The software is available for free download at http://www.visualgenedeveloper.net.

Visual gene developer: a fully programmable bioinformatics software for synthetic gene optimization

PubMed Central

2011-01-01

Background Direct gene synthesis is becoming more popular owing to decreases in gene synthesis pricing. Compared with using natural genes, gene synthesis provides a good opportunity to optimize gene sequence for specific applications. In order to facilitate gene optimization, we have developed a stand-alone software called Visual Gene Developer. Results The software not only provides general functions for gene analysis and optimization along with an interactive user-friendly interface, but also includes unique features such as programming capability, dedicated mRNA secondary structure prediction, artificial neural network modeling, network & multi-threaded computing, and user-accessible programming modules. The software allows a user to analyze and optimize a sequence using main menu functions or specialized module windows. Alternatively, gene optimization can be initiated by designing a gene construct and configuring an optimization strategy. A user can choose several predefined or user-defined algorithms to design a complicated strategy. The software provides expandable functionality as platform software supporting module development using popular script languages such as VBScript and JScript in the software programming environment. Conclusion Visual Gene Developer is useful for both researchers who want to quickly analyze and optimize genes, and those who are interested in developing and testing new algorithms in bioinformatics. The software is available for free download at http://www.visualgenedeveloper.net. PMID:21846353

Applications of Microcomputers in the Teaching of Physics 6502 Software.

ERIC Educational Resources Information Center

Marsh, David P.

1980-01-01

Described is a variety of uses of the microcomputer when coupled with software available for systems using 6502 microprocessors. Included are several computer programs which exhibit some of the possibilities for programing the 6502 microprocessors. (DS)

Object-Oriented Programming When Developing Software in Geology and Geophysics

NASA Astrophysics Data System (ADS)

Ahmadulin, R. K.; Bakanovskaya, L. N.

2017-01-01

The paper reviews the role of object-oriented programming when developing software in geology and geophysics. Main stages have been identified at which it is worthwhile to apply principles of object-oriented programming when developing software in geology and geophysics. The research was based on a number of problems solved in Geology and Petroleum Production Institute. Distinctive features of these problems are given and areas of application of the object-oriented approach are identified. Developing applications in the sphere of geology and geophysics has shown that the process of creating such products is simplified due to the use of object-oriented programming, firstly when designing structures for data storage and graphical user interfaces.

GPR data processing computer software for the PC

USGS Publications Warehouse

Lucius, Jeffrey E.; Powers, Michael H.

2002-01-01

The computer software described in this report is designed for processing ground penetrating radar (GPR) data on Intel-compatible personal computers running the MS-DOS operating system or MS Windows 3.x/95/98/ME/2000. The earliest versions of these programs were written starting in 1990. At that time, commercially available GPR software did not meet the processing and display requirements of the USGS. Over the years, the programs were refined and new features and programs were added. The collection of computer programs presented here can perform all basic processing of GPR data, including velocity analysis and generation of CMP stacked sections and data volumes, as well as create publication quality data images.

Support Equipment Management in the F/A-18 Program

DTIC Science & Technology

1986-12-01

or character (such as manuals and drawings) of a scientific or technical nature. Computer programs and related software are not technical data...documentation of computer programs and related software are. Also excluded are financial data or other information related to contract administration. 6...management in the F/A-18 program . Graeser, Kenneth S. http://hdl.handle.net/10945/22133 Downloaded from NPS Archive: Calhoun NAVAL POSTGRADUATE SCHOOL Monterey

The Software Maintenance Spectrum: Using More than Just New Toys

DTIC Science & Technology

2000-04-01

Deitel & Deitel, How to Program Java, Prentice Hall, Upper Saddle River, NJ, 1998. Bjarne Stroustrup, The C++ Programming Language, ATT Bell Labs, New... to Program Java, Prentice Hall, Upper Saddle River, NJ, 1998. Dershem, Herbert L and Michael J. Jipping, Programming Languages: Structures and Models...Chikofsky, Elliot and James Cross. Reverse Engineering and Design Recovery: A Taxonomy. IEEE Software, 7(1):13-17 (Jan 1990). Deitel & Deitel, How

An implementation of the distributed programming structural synthesis system (PROSSS)

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.

1981-01-01

A method is described for implementing a flexible software system that combines large, complex programs with small, user-supplied, problem-dependent programs and that distributes their execution between a mainframe and a minicomputer. The Programming Structural Synthesis System (PROSSS) was the specific software system considered. The results of such distributed implementation are flexibility of the optimization procedure organization and versatility of the formulation of constraints and design variables.

Building a Trusted Path for Applications Using COTS Components

DTIC Science & Technology

2004-11-01

against attacks by malicious software. Trojan horse programs, i.e., programs with additional hidden, often malicious, functions, are more and more...cannot be imitated by untrusted software." Wiseman et al. (1988) propose a user interface for the SMITE system to prevent Trojan horses from...input, two of which can also be used for the hologram service. 7.0 CONCLUSION Trojan horse programs, i.e., programs with additional hidden, often

A Comparison of Four Software Programs for Implementing Decision Analytic Cost-Effectiveness Models.

PubMed

Hollman, Chase; Paulden, Mike; Pechlivanoglou, Petros; McCabe, Christopher

2017-08-01

The volume and technical complexity of both academic and commercial research using decision analytic modelling has increased rapidly over the last two decades. The range of software programs used for their implementation has also increased, but it remains true that a small number of programs account for the vast majority of cost-effectiveness modelling work. We report a comparison of four software programs: TreeAge Pro, Microsoft Excel, R and MATLAB. Our focus is on software commonly used for building Markov models and decision trees to conduct cohort simulations, given their predominance in the published literature around cost-effectiveness modelling. Our comparison uses three qualitative criteria as proposed by Eddy et al.: "transparency and validation", "learning curve" and "capability". In addition, we introduce the quantitative criterion of processing speed. We also consider the cost of each program to academic users and commercial users. We rank the programs based on each of these criteria. We find that, whilst Microsoft Excel and TreeAge Pro are good programs for educational purposes and for producing the types of analyses typically required by health technology assessment agencies, the efficiency and transparency advantages of programming languages such as MATLAB and R become increasingly valuable when more complex analyses are required.

Analysis of Learning Behavior in a Flipped Programing Classroom Adopting Problem-Solving Strategies

ERIC Educational Resources Information Center

Chiang, Tosti Hsu-Cheng

2017-01-01

Programing is difficult for beginners because they need to learn the new language of computers. Developing software, especially complex software, is bound to result in problems, frustration, and the need to think in new ways. Identifying the learning behavior behind programing by way of empirical studies can help beginners learn more easily. In…

The Development and Use of a Language Arts Computer Software Program Appropriate for Special Needs Children.

ERIC Educational Resources Information Center

Murphy, Jo-Anne

For a school year, a language arts software program was used to help special needs children in Marblehead, Massachusetts who represented a range of learning disabilities and emotional, behavioral and physical disorders of varying degrees of severity. The program had three major components, entitled "Nouns,""Verbs," and "Adjectives." These…

Students' Perception on the Usefulness of ICT-Based Language Program

ERIC Educational Resources Information Center

Wiyaka; Mujiyanto, Januarius; Rukmini, Dwi

2018-01-01

This paper presents the result of a survey on the usefulness of an ICT-based software program called DEC (a pseudonym for a particular commercial English learning resource). This program was utilized by English Departement University of PGRI Semarang as a complementary software in Integrated Course offered to the first semester students. The…

Robot welding process control development task

NASA Technical Reports Server (NTRS)

Romine, Peter L.

1992-01-01

The completion of, and improvements made to, the software developed during 1990 for program maintenance on the PC and HEURIKON and transfer to the CYRO, and integration of the Rocketdyne vision software with the CYRO is documented. The new programs were used successfully by NASA, Rocketdyne, and UAH technicians and engineers to create, modify, upload, download, and control CYRO NC programs.

Tailoring Software for Multiple Processor Systems

DTIC Science & Technology

1982-10-01

resource management decisions . Despite the lack of programming support, the use of multiple processor systems has grown sub- -stantially. Software has...making resource management decisions . Specifically, program- 1 mers need not allocate specific hardware resources to individual program components...Instead, such allocation decisions are automatically made based on high-level resource directives stated by ap- plication programmers, where each directive

HAL/S language specification

NASA Technical Reports Server (NTRS)

Newbold, P. M.

1974-01-01

A programming language for the flight software of the NASA space shuttle program was developed and identified as HAL/S. The language is intended to satisfy virtually all of the flight software requirements of the space shuttle. The language incorporates a wide range of features, including applications-oriented data types and organizations, real time control mechanisms, and constructs for systems programming tasks.

An expert system based software sizing tool, phase 2

NASA Technical Reports Server (NTRS)

Friedlander, David

1990-01-01

A software tool was developed for predicting the size of a future computer program at an early stage in its development. The system is intended to enable a user who is not expert in Software Engineering to estimate software size in lines of source code with an accuracy similar to that of an expert, based on the program's functional specifications. The project was planned as a knowledge based system with a field prototype as the goal of Phase 2 and a commercial system planned for Phase 3. The researchers used techniques from Artificial Intelligence and knowledge from human experts and existing software from NASA's COSMIC database. They devised a classification scheme for the software specifications, and a small set of generic software components that represent complexity and apply to large classes of programs. The specifications are converted to generic components by a set of rules and the generic components are input to a nonlinear sizing function which makes the final prediction. The system developed for this project predicted code sizes from the database with a bias factor of 1.06 and a fluctuation factor of 1.77, an accuracy similar to that of human experts but without their significant optimistic bias.

The Chorus Conflict and Loss of Separation Resolution Algorithms

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Hagen, George E.; Maddalon, Jeffrey M.

2013-01-01

The Chorus software is designed to investigate near-term, tactical conflict and loss of separation detection and resolution concepts for air traffic management. This software is currently being used in two different problem domains: en-route self- separation and sense and avoid for unmanned aircraft systems. This paper describes the core resolution algorithms that are part of Chorus. The combination of several features of the Chorus program distinguish this software from other approaches to conflict and loss of separation resolution. First, the program stores a history of state information over time which enables it to handle communication dropouts and take advantage of previous input data. Second, the underlying conflict algorithms find resolutions that solve the most urgent conflict, but also seek to prevent secondary conflicts with the other aircraft. Third, if the program is run on multiple aircraft, and the two aircraft maneuver at the same time, the result will be implicitly co-ordinated. This implicit coordination property is established by ensuring that a resolution produced by Chorus will comply with a mathematically-defined criteria whose correctness has been formally verified. Fourth, the program produces both instantaneous solutions and kinematic solutions, which are based on simple accel- eration models. Finally, the program provides resolutions for recovery from loss of separation. Different versions of this software are implemented as Java and C++ software programs, respectively.

Software Engineering Education Directory. Software Engineering Curriculum Project

DTIC Science & Technology

1991-05-01

1986 with a questionnaire mailed to schools selected from Peterson’s Graduate Programs in Engineering and Applied Sciences 1986. We contacted schools...the publi- cation more complete. To discuss any issues related to this report, please contact: Education Program Software Engineering Institute...considered to be required course reading. How to Use This Section This portion of the directory is organized by state (in the U.S.), province (in

In-Plant Technical Assistance for Software

DTIC Science & Technology

1986-09-29

engineer who has had a few programming courses (or send him to a few), and then he will be your software engineer." ( Pressman , 1982.)* Generally, It...1984. Program Office/AFCMD Interface. AFSCR 800-42, November 1982. Pressman , Roger S., Software Engineering. McGraw-Hill, New York, 1982. Dennis...B.M.C., Norton AFB Darrah Whitlock QA Specialist, Plans & Eval. Branch Rockwell-Anaheim AFPRO Lt. Col. Barry Prins HQ/AFCMD Kirtland AFB Stan

OntoSoft: A Software Registry for Geosciences

NASA Astrophysics Data System (ADS)

Garijo, D.; Gil, Y.

2017-12-01

The goal of the EarthCube OntoSoft project is to enable the creation of an ecosystem for software stewardship in geosciences that will empower scientists to manage their software as valuable scientific assets. By sharing software metadata in OntoSoft, scientists enable broader access to that software by other scientists, software professionals, students, and decision makers. Our work to date includes: 1) an ontology for describing scientific software metadata, 2) a distributed scientific software repository that contains more than 750 entries that can be searched and compared across metadata fields, 3) an intelligent user interface that guides scientists to publish software and allows them to crowdsource its corresponding metadata. We have also developed a training program where scientists learn to describe and cite software in their papers in addition to data and provenance, and we are using OntoSoft to show them the benefits of publishing their software metadata. This training program is part of a Geoscience Papers of the Future Initiative, where scientists are reflecting on their current practices, benefits and effort for sharing software and data. This journal paper can be submitted to a Special Section of the AGU Earth and Space Science Journal.

Spacecraft Avionics Software Development Then and Now: Different but the Same

NASA Technical Reports Server (NTRS)

Mangieri, Mark L.; Garman, John (Jack); Vice, Jason

2012-01-01

NASA has always been in the business of balancing new technologies and techniques to achieve human space travel objectives. NASA s historic Software Production Facility (SPF) was developed to serve complex avionics software solutions during an era dominated by mainframes, tape drives, and lower level programming languages. These systems have proven themselves resilient enough to serve the Shuttle Orbiter Avionics life cycle for decades. The SPF and its predecessor the Software Development Lab (SDL) at NASA s Johnson Space Center (JSC) hosted flight software (FSW) engineering, development, simulation, and test. It was active from the beginning of Shuttle Orbiter development in 1972 through the end of the shuttle program in the summer of 2011 almost 40 years. NASA s Kedalion engineering analysis lab is on the forefront of validating and using many contemporary avionics HW/SW development and integration techniques, which represent new paradigms to NASA s heritage culture in avionics software engineering. Kedalion has validated many of the Orion project s HW/SW engineering techniques borrowed from the adjacent commercial aircraft avionics environment, inserting new techniques and skills into the Multi-Purpose Crew Vehicle (MPCV) Orion program. Using contemporary agile techniques, COTS products, early rapid prototyping, in-house expertise and tools, and customer collaboration, NASA has adopted a cost effective paradigm that is currently serving Orion effectively. This paper will explore and contrast differences in technology employed over the years of NASA s space program, due largely to technological advances in hardware and software systems, while acknowledging that the basic software engineering and integration paradigms share many similarities.

Design software for reuse

NASA Technical Reports Server (NTRS)

Tracz, Will

1990-01-01

Viewgraphs are presented on the designing of software for reuse. Topics include terminology, software reuse maxims, the science of programming, an interface design example, a modularization example, and reuse and implementation guidelines.

Software Process Improvement through the Removal of Project-Level Knowledge Flow Obstacles: The Perceptions of Software Engineers

ERIC Educational Resources Information Center

Mitchell, Susan Marie

2012-01-01

Uncontrollable costs, schedule overruns, and poor end product quality continue to plague the software engineering field. Innovations formulated with the expectation to minimize or eliminate cost, schedule, and quality problems have generally fallen into one of three categories: programming paradigms, software tools, and software process…

RICIS Software Engineering 90 Symposium: Aerospace Applications and Research Directions Proceedings Appendices

NASA Technical Reports Server (NTRS)

1990-01-01

Papers presented at RICIS Software Engineering Symposium are compiled. The following subject areas are covered: flight critical software; management of real-time Ada; software reuse; megaprogramming software; Ada net; POSIX and Ada integration in the Space Station Freedom Program; and assessment of formal methods for trustworthy computer systems.

Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

Review of CAI Materials.

ERIC Educational Resources Information Center

McCrary, Ronald G.

A discussion of computer software and courseware for second-language instruction outlines considerations for selecting software of various kinds and presents a list of selected computer programs. Suggestions are made for choosing text-specific software, non-text-specific software intended for language instruction, word processors intended for…

Effective Software Engineering Leadership for Development Programs

ERIC Educational Resources Information Center

Cagle West, Marsha

2010-01-01

Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

Academic Testing and Grading with Spreadsheet Software.

ERIC Educational Resources Information Center

Ho, James K.

1987-01-01

Explains how spreadsheet software can be used in the design and grading of academic tests and in assigning grades. Macro programs and menu-driven software are highlighted and an example using IBM PCs and Lotus 1-2-3 software is given. (Author/LRW)

48 CFR 52.227-14 - Rights in Data-General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. Computer software—(1) Means (i) Computer programs that comprise a series of instructions, rules... or computer software documentation. Computer software documentation means owner's manuals, user's... medium, that explain the capabilities of the computer software or provide instructions for using the...

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviews three software programs: (1) "Cartooners"--develops creative arts and animation, grades 1-6, Apple IIGS; (2) "PC Globe+"--social studies, geography, grades 4-12, IBM(384K); (3) "Wood Car Rally"--physical science, scientific method, grades 3-9, Apple II. (MVL)

Hop, Skip and Jump: Animation Software.

ERIC Educational Resources Information Center

Eiser, Leslie

1986-01-01

Discusses the features of animation software packages, reviewing eight commercially available programs. Information provided for each program includes name, publisher, current computer(s) required, cost, documentation, input device, import/export capabilities, printing possibilities, what users can originate, types of image manipulation possible,…

Saturn S-2 Automatic Software System /SASS/

NASA Technical Reports Server (NTRS)

Parker, P. E.

1967-01-01

SATURN S-2 Automatic Software System /SASS/ was designed and implemented to aid SATURN S-2 program development and to increase the overall operating efficiency within the S-2 data laboratory. This program is written in FORTRAN 2 for SDS 920 computers.

Reinforcement and Drill by Microcomputer.

ERIC Educational Resources Information Center

Balajthy, Ernest

1984-01-01

Points out why drill work has a role in the language arts classroom, explores the possibilities of using a microcomputer to give children drill work, and discusses the characteristics of a good software program, along with faults found in many software programs. (FL)

Can your software engineer program your PLC?

NASA Astrophysics Data System (ADS)

Borrowman, Alastair J.; Taylor, Philip

2016-07-01

The use of Programmable Logic Controllers (PLCs) in the control of large physics experiments is ubiquitous1, 2, 3. The programming of these controllers is normally the domain of engineers with a background in electronics, this paper introduces PLC program development from the software engineer's perspective. PLC programs provide the link between control software running on PC architecture systems and physical hardware controlled and monitored by digital and analog signals. The higher-level software running on the PC is typically responsible for accepting operator input and from this deciding when and how hardware connected to the PLC is controlled. The PLC accepts demands from the PC, considers the current state of its connected hardware and if correct to do so (based upon interlocks or other constraints) adjusts its hardware output signals appropriately for the PC's demands. A published ICD (Interface Control Document) defines the PLC memory locations available to be written and read by the PC to control and monitor the hardware. Historically the method of programming PLCs has been ladder diagrams that closely resemble circuit diagrams, however, PLC manufacturers nowadays also provide, and promote, the use of higher-level programming languages4. Based on techniques used in the development of high-level PC software to control PLCs for multiple telescopes, this paper examines the development of PLC programs to operate the hardware of a medical cyclotron beamline controlled from a PC using the Experimental Physics and Industrial Control System (EPICS), which is also widely used in telescope control5, 6, 7. The PLC used is the new generation Siemens S7-1200 programmed using Siemens Pascal based Structured Control Language (SCL), which is their implementation of Structured Text (ST). The approach described is that from a software engineer's perspective, utilising Siemens Totally Integrated Automation (TIA) Portal integrated development environment (IDE) to create modular PLC programs based upon reusable functions capable of being unit tested without the PLC connected to hardware. Emphasis has been placed on designing an interface between EPICS and SCL that enforces correct operation of hardware through stringent separation of PC accessible PLC memory and hardware I/O addresses used only by the PLC. The paper also introduces the method used to automate the creation, from the same source document, the PLC memory structure (tag) definitions (defining memory used to access hardware I/O and that accessed by the PC) and creation of the PC program data structures (EPICS database records) used to access the permitted PLC addresses. From direct experience this paper demonstrates the advantages of PLC program development being shared between electronic and software engineers, to enable use of the most appropriate processes from both the perspective of the hardware and the higher-level software used to control it.

Experience with Ada on the F-18 High Alpha Research Vehicle Flight Test Program

NASA Technical Reports Server (NTRS)

Regenie, Victoria A.; Earls, Michael; Le, Jeanette; Thomson, Michael

1992-01-01

Considerable experience was acquired with Ada at the NASA Dryden Flight Research Facility during the on-going High Alpha Technology Program. In this program, an F-18 aircraft was highly modified by the addition of thrust-vectoring vanes to the airframe. In addition, substantial alteration was made in the original quadruplex flight control system. The result is the High Alpha Research Vehicle. An additional research flight control computer was incorporated in each of the four channels. Software for the research flight control computer was written in Ada. To date, six releases of this software have been flown. This paper provides a detailed description of the modifications to the research flight control system. Efficient ground-testing of the software was accomplished by using simulations that used the Ada for portions of their software. These simulations are also described. Modifying and transferring the Ada for flight software to the software simulation configuration has allowed evaluation of this language. This paper also discusses such significant issues in using Ada as portability, modifiability, and testability as well as documentation requirements.

General purpose optimization software for engineering design

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1990-01-01

The author has developed several general purpose optimization programs over the past twenty years. The earlier programs were developed as research codes and served that purpose reasonably well. However, in taking the formal step from research to industrial application programs, several important lessons have been learned. Among these are the importance of clear documentation, immediate user support, and consistent maintenance. Most important has been the issue of providing software that gives a good, or at least acceptable, design at minimum computational cost. Here, the basic issues developing optimization software for industrial applications are outlined and issues of convergence rate, reliability, and relative minima are discussed. Considerable feedback has been received from users, and new software is being developed to respond to identified needs. The basic capabilities of this software are outlined. A major motivation for the development of commercial grade software is ease of use and flexibility, and these issues are discussed with reference to general multidisciplinary applications. It is concluded that design productivity can be significantly enhanced by the more widespread use of optimization as an everyday design tool.

Experience with Ada on the F-18 High Alpha Research Vehicle flight test program

NASA Technical Reports Server (NTRS)

Regenie, Victoria A.; Earls, Michael; Le, Jeanette; Thomson, Michael

1994-01-01

Considerable experience has been acquired with Ada at the NASA Dryden Flight Research Facility during the on-going High Alpha Technology Program. In this program, an F-18 aircraft has been highly modified by the addition of thrust-vectoring vanes to the airframe. In addition, substantial alteration was made in the original quadruplex flight control system. The result is the High Alpha Research Vehicle. An additional research flight control computer was incorporated in each of the four channels. Software for the research flight control computer was written Ada. To date, six releases of this software have been flown. This paper provides a detailed description of the modifications to the research flight control system. Efficient ground-testing of the software was accomplished by using simulations that used the Ada for portions of their software. These simulations are also described. Modifying and transferring the Ada flight software to the software simulation configuration has allowed evaluation of this language. This paper also discusses such significant issues in using Ada as portability, modifiability, and testability as well as documentation requirements.

Software Innovation in a Mission Critical Environment

NASA Technical Reports Server (NTRS)

Fredrickson, Steven

2015-01-01

Operating in mission-critical environments requires trusted solutions, and the preference for "tried and true" approaches presents a potential barrier to infusing innovation into mission-critical systems. This presentation explores opportunities to overcome this barrier in the software domain. It outlines specific areas of innovation in software development achieved by the Johnson Space Center (JSC) Engineering Directorate in support of NASA's major human spaceflight programs, including International Space Station, Multi-Purpose Crew Vehicle (Orion), and Commercial Crew Programs. Software engineering teams at JSC work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements for genuinely mission critical applications. The innovations described, including the use of NASA Core Flight Software and its associated software tool chain, can lead to software that is more affordable, more reliable, better modelled, more flexible, more easily maintained, better tested, and enabling of automation.

Method and apparatus for collaborative use of application program

DOEpatents

Dean, Craig D.

1994-01-01

Method and apparatus permitting the collaborative use of a computer application program simultaneously by multiple users at different stations. The method is useful with communication protocols having client/server control structures. The method of the invention requires only a sole executing copy of the application program and a sole executing copy of software comprising the invention. Users may collaboratively use a set of application programs by invoking for each desired application program one copy of software comprising the invention.

Promising More Information

NASA Technical Reports Server (NTRS)

2003-01-01

When NASA needed a real-time, online database system capable of tracking documentation changes in its propulsion test facilities, engineers at Stennis Space Center joined with ECT International, of Brookfield, Wisconsin, to create a solution. Through NASA's Dual-Use Program, ECT developed Exdata, a software program that works within the company's existing Promise software. Exdata not only satisfied NASA s requirements, but also expanded ECT s commercial product line. Promise, ECT s primary product, is an intelligent software program with specialized functions for designing and documenting electrical control systems. An addon to AutoCAD software, Promis e generates control system schematics, panel layouts, bills of material, wire lists, and terminal plans. The drawing functions include symbol libraries, macros, and automatic line breaking. Primary Promise customers include manufacturing companies, utilities, and other organizations with complex processes to control.

Mass Memory Storage Devices for AN/SLQ-32(V).

DTIC Science & Technology

1985-06-01

tactical programs and libraries into the AN/UYK-19 computer , the RP-16 microprocessor, and other peripheral processors (e.g., ADLS and Band 1) will be...software must be loaded into computer memory from the 4-track magnetic tape cartridges (MTCs) on which the programs are stored. Program load begins...software. Future computer programs , which will reside in peripheral processors, include the Automated Decoy Launching System (ADLS) and Band 1. As

Interactive graphics for the Macintosh: software review of FlexiGraphs.

PubMed

Antonak, R F

1990-01-01

While this product is clearly unique, its usefulness to individuals outside small business environments is somewhat limited. FlexiGraphs is, however, a reasonable first attempt to design a microcomputer software package that controls data through interactive editing within a graph. Although the graphics capabilities of mainframe programs such as MINITAB (Ryan, Joiner, & Ryan, 1981) and the graphic manipulations available through exploratory data analysis (e.g., Velleman & Hoaglin, 1981) will not be surpassed anytime soon by this program, a researcher may want to add this program to a software library containing other Macintosh statistics, drawing, and graphics programs if only to obtain the easy-to-obtain curve fitting and line smoothing options. I welcome the opportunity to review the enhanced "scientific" version of FlexiGraphs that the author of the program indicates is currently under development. An MS-DOS version of the program should be available within the year.

Reading Computer Programs: Instructor’s Guide to Exercises

DTIC Science & Technology

1990-08-01

activities that underlie effective writing, many of which are similar to those underlying software development . The module draws on related work in a number...Instructor’s Guide and Exercises Abstract: The ability to read and understand a computer program is a criti- cal skill for the software developer , yet this...skill is seldom developed in any systematic way in the education or training of software professionals. These materials discuss the importance of

Proprietary software

NASA Technical Reports Server (NTRS)

Marnock, M. J.

1971-01-01

The protection of intellectual property by a patent, a copyright, or trade secrets is reviewed. The present and future use of computers and software are discussed, along with the governmental uses of software. The popularity of contractual agreements for sale or lease of computer programs and software services is also summarized.

Shuttle avionics software trials, tribulations and success

NASA Technical Reports Server (NTRS)

Henderson, O. L.

1985-01-01

The early problems and the solutions developed to provide the required quality software needed to support the space shuttle engine development program are described. The decision to use a programmable digital control system on the space shuttle engine was primarily based upon the need for a flexible control system capable of supporting the total engine mission on a large complex pump fed engine. The mission definition included all control phases from ground checkout through post shutdown propellant dumping. The flexibility of the controller through reprogrammable software allowed the system to respond to the technical challenges and innovation required to develop both the engine and controller hardware. This same flexibility, however, placed a severe strain on the capability of the software development and verification organization. The overall development program required that the software facility accommodate significant growth in both the software requirements and the number of software packages delivered. This challenge was met by reorganization and evolution in the process of developing and verifying software.

Parallel computers - Estimate errors caused by imprecise data

NASA Technical Reports Server (NTRS)

Kreinovich, Vladik; Bernat, Andrew; Villa, Elsa; Mariscal, Yvonne

1991-01-01

A new approach to the problem of estimating errors caused by imprecise data is proposed in the context of software engineering. A software device is used to produce an ideal solution to the problem, when the computer is capable of computing errors of arbitrary programs. The software engineering aspect of this problem is to describe a device for computing the error estimates in software terms and then to provide precise numbers with error estimates to the user. The feasibility of the program capable of computing both some quantity and its error estimate in the range of possible measurement errors is demonstrated.

Data storage technology: Hardware and software, Appendix B

NASA Technical Reports Server (NTRS)

Sable, J. D.

1972-01-01

This project involves the development of more economical ways of integrating and interfacing new storage devices and data processing programs into a computer system. It involves developing interface standards and a software/hardware architecture which will make it possible to develop machine independent devices and programs. These will interface with the machine dependent operating systems of particular computers. The development project will not be to develop the software which would ordinarily be the responsibility of the manufacturer to supply, but to develop the standards with which that software is expected to confirm in providing an interface with the user or storage system.

Software Architecture for Big Data Systems

DTIC Science & Technology

2014-03-27

Software Architecture: Trends and New Directions #SEIswArch © 2014 Carnegie Mellon University Software Architecture for Big Data Systems...AND SUBTITLE Software Architecture for Big Data Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...ih - . Software Architecture: Trends and New Directions #SEIswArch © 2014 Carnegie Mellon University WHAT IS BIG DATA ? FROM A SOFTWARE

The Accelerated Reader: An Analysis of the Software's Strengths and Weaknesses and How It Can Be Used to Its Best Potential.

ERIC Educational Resources Information Center

Poock, Melanie M.

1998-01-01

Describes Accelerated Reader (AR), a computer software program that promotes reading; discusses AR hardware requirements; explains how it is used for book selection and testing in schools; assesses the program's strengths and weaknesses; and describes how Grant and Madison Elementary Schools (Muscatine, Iowa) have used the program effectively.…

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR PERFORMANCE OF COMPUTER SOFTWARE: VERIFICATION AND VALIDATION (UA-D-2.0)

EPA Science Inventory

The purpose of this SOP is to define the procedures used for the initial and periodic verification and validation of computer programs used during the Arizona NHEXAS project and the Border study. Keywords: Computers; Software; QA/QC.

The U.S.-Mexico Border Program is sponsored ...

In-Situ Pointing Correction and Rover Microlocalization

NASA Technical Reports Server (NTRS)

Deen, Robert G.; Lorre, Jean J.

2010-01-01

Two software programs, marstie and marsnav, work together to generate pointing corrections and rover micro-localization for in-situ images. The programs are based on the PIG (Planetary Image Geometry) library, which handles all mission dependencies. As a result, there is no mission-specific code in either of these programs. This software corrects geometric seams in images as much as possible.

Relation between Alice Software and Programming Learning: A Systematic Review of the Literature and Meta-Analysis

ERIC Educational Resources Information Center

Costa, Joana M.; Miranda, Guilhermina L.

2017-01-01

This paper presents the results of a systematic review of the literature, including a meta-analysis, about the effectiveness of the use of Alice software in programming learning when compared to the use of a conventional programming language. Our research included studies published between the years 2000 and 2014 in the main databases. We gathered…

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviews three software programs: (1) "Microsoft Works 2.0": word processing, data processing, and telecommunications, grades 7 and up; (2) "AppleWorks GS": word processor, database, spreadsheet, graphics, and telecommunications, grades 3-12, Apple IIGS; (3) "Choices, Choices: On the Playground, Taking Responsibility":…

How Nasa's Independent Verification and Validation (IVandV) Program Builds Reliability into a Space Mission Software System (SMSS)

NASA Technical Reports Server (NTRS)

Fisher, Marcus S.; Northey, Jeffrey; Stanton, William

2014-01-01

The purpose of this presentation is to outline how the NASA Independent Verification and Validation (IVV) Program helps to build reliability into the Space Mission Software Systems (SMSSs) that its customers develop.

HAL/S programmer's guide. [space shuttle flight software language

NASA Technical Reports Server (NTRS)

Newbold, P. M.; Hotz, R. L.

1974-01-01

HAL/S is a programming language developed to satisfy the flight software requirements for the space shuttle program. The user's guide explains pertinent language operating procedures and described the various HAL/S facilities for manipulating integer, scalar, vector, and matrix data types.

Computer Bits: Child Care Center Management Software Buying Guide Update.

ERIC Educational Resources Information Center

Neugebauer, Roger

1987-01-01

Compares seven center management programs used for basic financial and data management tasks such as accounting, payroll and attendance records, and mailing lists. Describes three other specialized programs and gives guidelines for selecting the best software for a particular center. (NH)

Software for Optimizing Plans Involving Interdependent Goals

NASA Technical Reports Server (NTRS)

Estlin, Tara; Gaines, Daniel; Rabideau, Gregg

2005-01-01

A computer program enables construction and optimization of plans for activities that are directed toward achievement of goals that are interdependent. Goal interdependence is defined as the achievement of one or more goals affecting the desirability or priority of achieving one or more other goals. This program is overlaid on the Automated Scheduling and Planning Environment (ASPEN) software system, aspects of which have been described in a number of prior NASA Tech Briefs articles. Unlike other known or related planning programs, this program considers interdependences among goals that can change between problems and provides a language for easily specifying such dependences. Specifications of the interdependences can be formulated dynamically and provided to the associated planning software as part of the goal input. Then an optimization algorithm provided by this program enables the planning software to reason about the interdependences and incorporate them into an overall objective function that it uses to rate the quality of a plan under construction and to direct its optimization search. In tests on a series of problems of planning geological experiments by a team of instrumented robotic vehicles (rovers) on new terrain, this program was found to enhance plan quality.

Software engineering and the role of Ada: Executive seminar

NASA Technical Reports Server (NTRS)

Freedman, Glenn B.

1987-01-01

The objective was to introduce the basic terminology and concepts of software engineering and Ada. The life cycle model is reviewed. The application of the goals and principles of software engineering is applied. An introductory understanding of the features of the Ada language is gained. Topics addressed include: the software crises; the mandate of the Space Station Program; software life cycle model; software engineering; and Ada under the software engineering umbrella.

C-Language Integrated Production System, Version 5.1

NASA Technical Reports Server (NTRS)

Riley, Gary; Donnell, Brian; Ly, Huyen-Anh VU; Culbert, Chris; Savely, Robert T.; Mccoy, Daniel J.; Giarratano, Joseph

1992-01-01

CLIPS 5.1 provides cohesive software tool for handling wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming provides representation of knowledge by use of heuristics. Object-oriented programming enables modeling of complex systems as modular components. Procedural programming enables CLIPS to represent knowledge in ways similar to those allowed in such languages as C, Pascal, Ada, and LISP. Working with CLIPS 5.1, one can develop expert-system software by use of rule-based programming only, object-oriented programming only, procedural programming only, or combinations of the three.

Software To Go: A Catalog of Software Available for Loan.

ERIC Educational Resources Information Center

Kurlychek, Ken, Comp.

This catalog lists the holdings of the Software To Go software lending library and clearinghouse for programs and agencies serving students or clients who are deaf or hard of hearing. An introduction describes the clearinghouse and its collection of software, much of it commercial and copyrighted material, for Apple, Macintosh, and IBM (MS-DOS)…

Ten recommendations for software engineering in research.

PubMed

Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

2014-01-01

Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

Exploring faculty perceptions towards electronic health records for nursing education.

PubMed

Kowitlawakul, Y; Chan, S W C; Wang, L; Wang, W

2014-12-01

The use of electronic health records in nursing education is rapidly increasing worldwide. The successful implementation of electronic health records for nursing education software program relies on students as well as nursing faculty members. This study aimed to explore the experiences and perceptions of nursing faculty members using electronic health records for nursing education software program, and to identify the influential factors for successful implementation of this technology. This exploratory qualitative study was conducted using in-depth individual interviews at a university in Singapore. Seven faculty members participated in the study. The data were gathered and analysed at the end of the semester in the 2012/2013 academic year. The participants' perceptions of the software program were organized into three main categories: innovation, transition and integration. The participants perceived this technology as innovative, with both values and challenges for the users. In addition, using the new software program was perceived as transitional process. The integration of this technology required time from faculty members and students, as well as support from administrators. The software program had only been implemented for 2-3 months at the time of the interviews. Consequently, the participants might have lacked the necessary skill and competence and confidence to implement it successfully. In addition, the unequal exposure to the software program might have had an impact on participants' perceptions. The findings show that the integration of electronic health records into nursing education curricula is dependent on the faculty members' experiences with the new technology, as well as their perceptions of it. Hence, cultivating a positive attitude towards the use of new technologies is important. Electronic health records are significant applications of health information technology. Health informatics competency should be included as a required competency component in faculty professional development policy and programmes. © 2014 International Council of Nurses.

Policy Process Editor for P3BM Software

NASA Technical Reports Server (NTRS)

James, Mark; Chang, Hsin-Ping; Chow, Edward T.; Crichton, Gerald A.

2010-01-01

A computer program enables generation, in the form of graphical representations of process flows with embedded natural-language policy statements, input to a suite of policy-, process-, and performance-based management (P3BM) software. This program (1) serves as an interface between users and the Hunter software, which translates the input into machine-readable form; and (2) enables users to initialize and monitor the policy-implementation process. This program provides an intuitive graphical interface for incorporating natural-language policy statements into business-process flow diagrams. Thus, the program enables users who dictate policies to intuitively embed their intended process flows as they state the policies, reducing the likelihood of errors and reducing the time between declaration and execution of policy.

Development of visual 3D virtual environment for control software

NASA Technical Reports Server (NTRS)

Hirose, Michitaka; Myoi, Takeshi; Amari, Haruo; Inamura, Kohei; Stark, Lawrence

1991-01-01

Virtual environments for software visualization may enable complex programs to be created and maintained. A typical application might be for control of regional electric power systems. As these encompass broader computer networks than ever, construction of such systems becomes very difficult. Conventional text-oriented environments are useful in programming individual processors. However, they are obviously insufficient to program a large and complicated system, that includes large numbers of computers connected to each other; such programming is called 'programming in the large.' As a solution for this problem, the authors are developing a graphic programming environment wherein one can visualize complicated software in virtual 3D world. One of the major features of the environment is the 3D representation of concurrent process. 3D representation is used to supply both network-wide interprocess programming capability (capability for 'programming in the large') and real-time programming capability. The authors' idea is to fuse both the block diagram (which is useful to check relationship among large number of processes or processors) and the time chart (which is useful to check precise timing for synchronization) into a single 3D space. The 3D representation gives us a capability for direct and intuitive planning or understanding of complicated relationship among many concurrent processes. To realize the 3D representation, a technology to enable easy handling of virtual 3D object is a definite necessity. Using a stereo display system and a gesture input device (VPL DataGlove), our prototype of the virtual workstation has been implemented. The workstation can supply the 'sensation' of the virtual 3D space to a programmer. Software for the 3D programming environment is implemented on the workstation. According to preliminary assessments, a 50 percent reduction of programming effort is achieved by using the virtual 3D environment. The authors expect that the 3D environment has considerable potential in the field of software engineering.

The Utility of Free Software for Gravity and Magnetic Advanced Data Processing

NASA Astrophysics Data System (ADS)

Grandis, Hendra; Dahrin, Darharta

2017-04-01

The lack of computational tools, i.e. software, often hinders the proper teaching and application of geophysical data processing in academic institutions in Indonesia. Although there are academic licensing options for commercial software, such options are still way beyond the financial capability of some academic institutions. Academic community members (both lecturers and students) are supposed to be creative and resourceful to overcome such situation. Therefore, capability for writing computer programs or codes is a necessity. However, there are also many computer programs and even software that are freely available on the internet. Generally, the utility of the freely distributed software is limited for demonstration only or for visualizing and exchanging data. The paper discusses the utility of Geosoft’s Oasis Montaj Viewer along with USGS GX programs that are available for free. Useful gravity and magnetic advanced data processing (i.e. gradient calculation, spectral analysis etc.) can be performed “correctly” without any approximation that sometimes leads to dubious results and interpretation.

THRESH—Software for tracking rainfall thresholds for landslide and debris-flow occurrence, user manual

USGS Publications Warehouse

Baum, Rex L.; Fischer, Sarah J.; Vigil, Jacob C.

2018-02-28

Precipitation thresholds are used in many areas to provide early warning of precipitation-induced landslides and debris flows, and the software distribution THRESH is designed for automated tracking of precipitation, including precipitation forecasts, relative to thresholds for landslide occurrence. This software is also useful for analyzing multiyear precipitation records to compare timing of threshold exceedance with dates and times of historical landslides. This distribution includes the main program THRESH for comparing precipitation to several kinds of thresholds, two utility programs, and a small collection of Python and shell scripts to aid the automated collection and formatting of input data and the graphing and further analysis of output results. The software programs can be deployed on computing platforms that support Fortran 95, Python 2, and certain Unix commands. The software handles rainfall intensity-duration thresholds, cumulative recent-antecedent precipitation thresholds, and peak intensity thresholds as well as various measures of antecedent precipitation. Users should have predefined rainfall thresholds before running THRESH.

Support Vector Machine algorithm for regression and classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Chenggang; Zavaljevski, Nela

2001-08-01

The software is an implementation of the Support Vector Machine (SVM) algorithm that was invented and developed by Vladimir Vapnik and his co-workers at AT&T Bell Laboratories. The specific implementation reported here is an Active Set method for solving a quadratic optimization problem that forms the major part of any SVM program. The implementation is tuned to specific constraints generated in the SVM learning. Thus, it is more efficient than general-purpose quadratic optimization programs. A decomposition method has been implemented in the software that enables processing large data sets. The size of the learning data is virtually unlimited by themore » capacity of the computer physical memory. The software is flexible and extensible. Two upper bounds are implemented to regulate the SVM learning for classification, which allow users to adjust the false positive and false negative rates. The software can be used either as a standalone, general-purpose SVM regression or classification program, or be embedded into a larger software system.« less

Simulation and animation of sensor-driven robots.

PubMed

Chen, C; Trivedi, M M; Bidlack, C R

1994-10-01

Most simulation and animation systems utilized in robotics are concerned with simulation of the robot and its environment without simulation of sensors. These systems have difficulty in handling robots that utilize sensory feedback in their operation. In this paper, a new design of an environment for simulation, animation, and visualization of sensor-driven robots is presented. As sensor technology advances, increasing numbers of robots are equipped with various types of sophisticated sensors. The main goal of creating the visualization environment is to aid the automatic robot programming and off-line programming capabilities of sensor-driven robots. The software system will help the users visualize the motion and reaction of the sensor-driven robot under their control program. Therefore, the efficiency of the software development is increased, the reliability of the software and the operation safety of the robot are ensured, and the cost of new software development is reduced. Conventional computer-graphics-based robot simulation and animation software packages lack of capabilities for robot sensing simulation. This paper describes a system designed to overcome this deficiency.

Automated Routines for Calculating Whole-Stream Metabolism: Theoretical Background and User's Guide

USGS Publications Warehouse

Bales, Jerad D.; Nardi, Mark R.

2007-01-01

In order to standardize methods and facilitate rapid calculation and archival of stream-metabolism variables, the Stream Metabolism Program was developed to calculate gross primary production, net ecosystem production, respiration, and selected other variables from continuous measurements of dissolved-oxygen concentration, water temperature, and other user-supplied information. Methods for calculating metabolism from continuous measurements of dissolved-oxygen concentration and water temperature are fairly well known, but a standard set of procedures and computation software for all aspects of the calculations were not available previously. The Stream Metabolism Program addresses this deficiency with a stand-alone executable computer program written in Visual Basic.NET?, which runs in the Microsoft Windows? environment. All equations and assumptions used in the development of the software are documented in this report. Detailed guidance on application of the software is presented, along with a summary of the data required to use the software. Data from either a single station or paired (upstream, downstream) stations can be used with the software to calculate metabolism variables.

A Verification Method of Inter-Task Cooperation in Embedded Real-time Systems and its Evaluation

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

In software development process of embedded real-time systems, the design of the task cooperation process is very important. The cooperating process of such tasks is specified by task cooperation patterns. Adoption of unsuitable task cooperation patterns has fatal influence on system performance, quality, and extendibility. In order to prevent repetitive work caused by the shortage of task cooperation performance, it is necessary to verify task cooperation patterns in an early software development stage. However, it is very difficult to verify task cooperation patterns in an early software developing stage where task program codes are not completed yet. Therefore, we propose a verification method using task skeleton program codes and a real-time kernel that has a function of recording all events during software execution such as system calls issued by task program codes, external interrupts, and timer interrupt. In order to evaluate the proposed verification method, we applied it to the software development process of a mechatronics control system.

Instructional Software and Attention Disorders: A Tool for Teachers.

ERIC Educational Resources Information Center

Bice, Joe E.; And Others

This handbook provides information on 31 software programs designed to instruct students with attention disorders in individual and group settings. The most successful applications of instructional software are identified, and six broad categories of instructional software are discussed. Twenty-one strategies for teaching students with attention…

Learning Human Aspects of Collaborative Software Development

ERIC Educational Resources Information Center

Hadar, Irit; Sherman, Sofia; Hazzan, Orit

2008-01-01

Collaboration has become increasingly widespread in the software industry as systems have become larger and more complex, adding human complexity to the technological complexity already involved in developing software systems. To deal with this complexity, human-centric software development methods, such as Extreme Programming and other agile…

Remote Viewer for Maritime Robotics Software

NASA Technical Reports Server (NTRS)

Kuwata, Yoshiaki; Wolf, Michael; Huntsberger, Terrance L.; Howard, Andrew B.

2013-01-01

This software is a viewer program for maritime robotics software that provides a 3D visualization of the boat pose, its position history, ENC (Electrical Nautical Chart) information, camera images, map overlay, and detected tracks.

Program For Generating Interactive Displays

NASA Technical Reports Server (NTRS)

Costenbader, Jay; Moleski, Walt; Szczur, Martha; Howell, David; Engelberg, Norm; Li, Tin P.; Misra, Dharitri; Miller, Philip; Neve, Leif; Wolf, Karl;

PPM Receiver Implemented in Software

NASA Technical Reports Server (NTRS)

Gray, Andrew; Kang, Edward; Lay, Norman; Vilnrotter, Victor; Srinivasan, Meera; Lee, Clement

2010-01-01

A computer program has been written as a tool for developing optical pulse-position- modulation (PPM) receivers in which photodetector outputs are fed to analog-to-digital converters (ADCs) and all subsequent signal processing is performed digitally. The program can be used, for example, to simulate an all-digital version of the PPM receiver described in Parallel Processing of Broad-Band PPM Signals (NPO-40711), which appears elsewhere in this issue of NASA Tech Briefs. The program can also be translated into a design for digital PPM receiver hardware. The most notable innovation embodied in the software and the underlying PPM-reception concept is a digital processing subsystem that performs synchronization of PPM time slots, even though the digital processing is, itself, asynchronous in the sense that no attempt is made to synchronize it with the incoming optical signal a priori and there is no feedback to analog signal processing subsystems or ADCs. Functions performed by the software receiver include time-slot synchronization, symbol synchronization, coding preprocessing, and diagnostic functions. The program is written in the MATLAB and Simulink software system. The software receiver is highly parameterized and, hence, programmable: for example, slot- and symbol-synchronization filters have programmable bandwidths.

Busting out of crystallography's Sisyphean prison: from pencil and paper to structure solving at the press of a button: past, present and future of crystallographic software development, maintenance and distribution.

PubMed

Cranswick, Lachlan Michael David

2008-01-01

The history of crystallographic computing and use of crystallographic software is one which traces the escape from the drudgery of manual human calculations to a world where the user delegates most of the travail to electronic computers. In practice, this involves practising crystallographers communicating their thoughts to the crystallographic program authors, in the hope that new procedures will be implemented within their software. Against this background, the development of small-molecule single-crystal and powder diffraction software is traced. Starting with the analogue machines and the use of Hollerith tabulators of the late 1930's, it is shown that computing developments have been science led, with new technologies being harnessed to solve pressing crystallographic problems. The development of software is also traced, with a final caution that few of the computations now performed daily are really understood by the program users. Unless a sufficient body of people continues to dismantle and re-build programs, the knowledge encoded in the old programs will become as inaccessible as the knowledge of how to build the Great Pyramid at Giza.

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Programs in use today generally have all of the function and information processing capabilities required to do their specified job. However, older programs usually use obsolete technology, are not integrated properly with other programs, and are difficult to maintain. Reengineering is becoming a prominent discipline as organizations try to move their systems to more modern and maintainable technologies. The Johnson Space Center (JSC) Software Technology Branch (STB) is researching and developing a system to support reengineering older FORTRAN programs into more maintainable forms that can also be more readily translated to a modern languages such as FORTRAN 8x, Ada, or C. This activity has led to the development of maintenance strategies for design recovery and reengineering. These strategies include a set of standards, methodologies, and the concepts for a software environment to support design recovery and reengineering. A brief description of the problem being addressed and the approach that is being taken by the STB toward providing an economic solution to the problem is provided. A statement of the maintenance problems, the benefits and drawbacks of three alternative solutions, and a brief history of the STB experience in software reengineering are followed by the STB new FORTRAN standards, methodology, and the concepts for a software environment.

Ground Processing of Data From the Mars Exploration Rovers

NASA Technical Reports Server (NTRS)

Wright, Jesse; Sturdevant, Kathryn; Noble, David

2006-01-01

A computer program implements the Earth side of the protocol that governs the transfer of data files generated by the Mars Exploration Rovers. It also provides tools for viewing data in these files and integrating data-product files into automated and manual processes. It reconstitutes files from telemetry data packets. Even if only one packet is received, metadata provide enough information to enable this program to identify and use partial data products. This software can generate commands to acknowledge received files and retransmit missed parts of files, or it can feed a manual process to make decisions about retransmission. The software uses an Extensible Markup Language (XML) data dictionary to provide a generic capability for displaying files of basic types, and uses external "plug-in" application programs to provide more sophisticated displays. This program makes data products available with very low latency, and can trigger automated actions when complete or partial products are received. The software is easy to install and use. The only system requirement for installing the software is a Java J2SE 1.4 platform. Several instances of the software can be executed simultaneously on the same machine.

Streamlining Software Aspects of Certification: Report on the SSAC Survey

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Dorsey, Cheryl A.; Knight, John C.; Leveson, Nancy G.; McCormick, G. Frank

1999-01-01

The aviation system now depends on information technology more than ever before to ensure safety and efficiency. To address concerns about the efficacy of software aspects of the certification process, the Federal Aviation Administration (FAA) began the Streamlining Software Aspects of Certification (SSAC) program. The SSAC technical team was commissioned to gather data, analyze results, and propose recommendations to maximize efficiency and minimize cost and delay, without compromising safety. The technical team conducted two public workshops to identify and prioritize software approval issues, and conducted a survey to validate the most urgent of those issues. The SSAC survey, containing over two hundred questions about the FAA's software approval process, reached over four hundred industry software developers, aircraft manufacturers, and FAA designated engineering representatives. Three hundred people responded. This report presents the SSAC program rationale, survey process, preliminary findings, and recommendations.

The social disutility of software ownership.

PubMed

Douglas, David M

2011-09-01

Software ownership allows the owner to restrict the distribution of software and to prevent others from reading the software's source code and building upon it. However, free software is released to users under software licenses that give them the right to read the source code, modify it, reuse it, and distribute the software to others. Proponents of free software such as Richard M. Stallman and Eben Moglen argue that the social disutility of software ownership is a sufficient justification for prohibiting it. This social disutility includes the social instability of disregarding laws and agreements covering software use and distribution, inequality of software access, and the inability to help others by sharing software with them. Here I consider these and other social disutility claims against withholding specific software rights from users, in particular, the rights to read the source code, duplicate, distribute, modify, imitate, and reuse portions of the software within new programs. I find that generally while withholding these rights from software users does cause some degree of social disutility, only the rights to duplicate, modify and imitate cannot legitimately be denied to users on this basis. The social disutility of withholding the rights to distribute the software, read its source code and reuse portions of it in new programs is insufficient to prohibit software owners from denying them to users. A compromise between the software owner and user can minimise the social disutility of withholding these particular rights from users. However, the social disutility caused by software patents is sufficient for rejecting such patents as they restrict the methods of reducing social disutility possible with other forms of software ownership.

The STARLINK software collection

NASA Astrophysics Data System (ADS)

Penny, A. J.; Wallace, P. T.; Sherman, J. C.; Terret, D. L.

1993-12-01

A demonstration will be given of some recent Starlink software. STARLINK is: a network of computers used by UK astronomers; a collection of programs for the calibration and analysis of astronomical data; a team of people giving hardware, software and administrative support. The Starlink Project has been in operation since 1980 to provide UK astronomers with interactive image processing and data reduction facilities. There are now Starlink computer systems at 25 UK locations, serving about 1500 registered users. The Starlink software collection now has about 25 major packages covering a wide range of astronomical data reduction and analysis techniques, as well as many smaller programs and utilities. At the core of most of the packages is a common `software environment', which provides many of the functions which applications need and offers standardized methods of structuring and accessing data. The software environment simplifies programming and support, and makes it easy to use different packages for different stages of the data reduction. Users see a consistent style, and can mix applications without hitting problems of differing data formats. The Project group coordinates the writing and distribution of this software collection, which is Unix based. Outside the UK, Starlink is used at a large number of places, which range from installations at major UK telescopes, which are Starlink-compatible and managed like Starlink sites, to individuals who run only small parts of the Starlink software collection.

Technology in the Classroom.

ERIC Educational Resources Information Center

Gladhart, Marsha A.

1994-01-01

Reviews two computer software programs for children: (1) "Ready, Set, Read with Bananas and Jack" (Sierra Discovery Series), available for Windows or Macintosh systems, which uses animation and sound to teach early reading skills; and (2) "Word Connection" (Action Software), a Macintosh program that creates word puzzles. (MDM)

Computer Center. Interactive Biology with Videodisc.

ERIC Educational Resources Information Center

Kramer, David W.

1991-01-01

Ways in which students are allowed to choose, based on their curiosity at the moment, which way they will move through a lesson are described. Available software for interactive biology programs and available authoring software for developing interactive programs by teachers and students are listed. (KR)

Toward Software Both Seen and Heard.

ERIC Educational Resources Information Center

Lazzaro, Joseph J.

1996-01-01

Visually impaired users are hampered by current PC software written for graphical user interfaces. Screen readers that vocalize displayed text require standardization that remains missing in the programming industry; the readers cannot interpret many cues in the Windows environment. More programming standards and adaptive technology for computers…

UNIX Writer's Workbench: Software for Streamlined Communication.

ERIC Educational Resources Information Center

Frase, Lawrence T; Diel, Mary

1986-01-01

Discusses computer editing and describes the capacities and features of an integrated software package, Writer's Workbench. Suggests ways in which this program can be used to improve writing skills. Reviews the effects of this program on technical users, college students, and high school students. (ML)

The Effective Use of an Interactive Software Program to Reduce Students' Misconceptions about Batteries

ERIC Educational Resources Information Center

Yang, E.-M.; Greenbowe, T. J.; Andre, T.

2004-01-01

The misconceptions of students regarding electricity and electrochemistry in the context of operation of a common flashlight are discussed. An Interactive Software Program (ISP) is used for better conceptual understanding of the operation of commercial batteries in a circuit.

The Weatherization Assistant User's Manual (Version 8.9)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gettings, Michael B.; Malhotra, Mini; Ternes, Mark P.

The Weatherization Assistant is a Windows-based energy audit software tool that was developed by Oak Ridge National Laboratory (ORNL) to help states and their local weatherization agencies implement the U.S. Department of Energy (DOE) Weatherization Assistance Program. The Weatherization Assistant is an umbrella program for two individual energy audits or measure selection programs: the National Energy Audit Tool (NEAT) for site-built single-family homes and the Manufactured Home Energy Audit (MHEA) for mobile homes. The Weatherization Assistant User's Manual documents the operation of the user interface for Version 8.9 of the software. This includes how to install and setup the software,more » navigate through the program, and initiate an energy audit. All of the user interface forms associated with the software and the data fields on these forms are described in detail. The manual is intended to be a training manual for new users of the Weatherization Assistant and as a reference manual for experienced users.« less

Concurrent extensions to the FORTRAN language for parallel programming of computational fluid dynamics algorithms

NASA Technical Reports Server (NTRS)

Weeks, Cindy Lou

1986-01-01

Experiments were conducted at NASA Ames Research Center to define multi-tasking software requirements for multiple-instruction, multiple-data stream (MIMD) computer architectures. The focus was on specifying solutions for algorithms in the field of computational fluid dynamics (CFD). The program objectives were to allow researchers to produce usable parallel application software as soon as possible after acquiring MIMD computer equipment, to provide researchers with an easy-to-learn and easy-to-use parallel software language which could be implemented on several different MIMD machines, and to enable researchers to list preferred design specifications for future MIMD computer architectures. Analysis of CFD algorithms indicated that extensions of an existing programming language, adaptable to new computer architectures, provided the best solution to meeting program objectives. The CoFORTRAN Language was written in response to these objectives and to provide researchers a means to experiment with parallel software solutions to CFD algorithms on machines with parallel architectures.

A proposed classification scheme for Ada-based software products

NASA Technical Reports Server (NTRS)

Cernosek, Gary J.

1986-01-01

As the requirements for producing software in the Ada language become a reality for projects such as the Space Station, a great amount of Ada-based program code will begin to emerge. Recognizing the potential for varying levels of quality to result in Ada programs, what is needed is a classification scheme that describes the quality of a software product whose source code exists in Ada form. A 5-level classification scheme is proposed that attempts to decompose this potentially broad spectrum of quality which Ada programs may possess. The number of classes and their corresponding names are not as important as the mere fact that there needs to be some set of criteria from which to evaluate programs existing in Ada. An exact criteria for each class is not presented, nor are any detailed suggestions of how to effectively implement this quality assessment. The idea of Ada-based software classification is introduced and a set of requirements from which to base further research and development is suggested.

Impact of computer-based treatment planning software on clinical judgment of dental students for planning prosthodontic rehabilitation

PubMed Central

Deshpande, Saee; Chahande, Jayashree

2014-01-01

Purpose Successful prosthodontic rehabilitation involves making many interrelated clinical decisions which have an impact on each other. Self-directed computer-based training has been shown to be a very useful tool to develop synthetic and analytical problem-solving skills among students. Thus, a computer-based case study and treatment planning (CSTP) software program was developed which would allow students to work through the process of comprehensive, multidisciplinary treatment planning for patients in a structured and logical manner. The present study was aimed at assessing the effect of this CSTP software on the clinical judgment of dental students while planning prosthodontic rehabilitation and to assess the students’ perceptions about using the program for its intended use. Methods A CSTP software program was developed and validated. The impact of this program on the clinical decision making skills of dental graduates was evaluated by real life patient encounters, using a modified and validated mini-CEX. Students’ perceptions about the program were obtained by a pre-validated feedback questionnaire. Results The faculty assessment scores of clinical judgment improved significantly after the use of this program. The majority of students felt it was an informative, useful, and innovative way of learning and they strongly felt that they had learnt the logical progression of planning, the insight into decision making, and the need for flexibility in treatment planning after using this program. Conclusion CSTP software was well received by the students. There was significant improvement in students’ clinical judgment after using this program. It should thus be envisaged fundamentally as an adjunct to conventional teaching techniques to improve students’ decision making skills and confidence. PMID:25170288

PSGMiner: A modular software for polysomnographic analysis.

PubMed

Umut, İlhan

2016-06-01

Sleep disorders affect a great percentage of the population. The diagnosis of these disorders is usually made by polysomnography. This paper details the development of new software to carry out feature extraction in order to perform robust analysis and classification of sleep events using polysomnographic data. The software, called PSGMiner, is a tool, which visualizes, processes and classifies bioelectrical data. The purpose of this program is to provide researchers with a platform with which to test new hypotheses by creating tests to check for correlations that are not available in commercially available software. The software is freely available under the GPL3 License. PSGMiner is composed of a number of diverse modules such as feature extraction, annotation, and machine learning modules, all of which are accessible from the main module. Using the software, it is possible to extract features of polysomnography using digital signal processing and statistical methods and to perform different analyses. The features can be classified through the use of five classification algorithms. PSGMiner offers an architecture designed for integrating new methods. Automatic scoring, which is available in almost all commercial PSG software, is not inherently available in this program, though it can be implemented by two different methodologies (machine learning and algorithms). While similar software focuses on a certain signal or event composed of a small number of modules with no expansion possibility, the software introduced here can handle all polysomnographic signals and events. The software simplifies the processing of polysomnographic signals for researchers and physicians that are not experts in computer programming. It can find correlations between different events which could help predict an oncoming event such as sleep apnea. The software could also be used for educational purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of Automated Analyses of Cell Migration on Flat and Nanostructured Surfaces

PubMed Central

Grădinaru, Cristian; Łopacińska, Joanna M.; Huth, Johannes; Kestler, Hans A.; Flyvbjerg, Henrik; Mølhave, Kristian

2012-01-01

Motility studies of cells often rely on computer software that analyzes time-lapse recorded movies and establishes cell trajectories fully automatically. This raises the question of reproducibility of results, since different programs could yield significantly different results of such automated analysis. The fact that the segmentation routines of such programs are often challenged by nanostructured surfaces makes the question more pertinent. Here we illustrate how it is possible to track cells on bright field microscopy images with image analysis routines implemented in an open-source cell tracking program, PACT (Program for Automated Cell Tracking). We compare the automated motility analysis of three cell tracking programs, PACT, Autozell, and TLA, using the same movies as input for all three programs. We find that different programs track overlapping, but different subsets of cells due to different segmentation methods. Unfortunately, population averages based on such different cell populations, differ significantly in some cases. Thus, results obtained with one software package are not necessarily reproducible by other software. PMID:24688640

British Diabetic Association review of the AIDA v4 diabetes software simulator program.

PubMed

Lehmann, Eldon D

2004-02-01

AIDA is a diabetes-computing program freely available from www.2aida.org on the Web. The software is intended to serve as an educational support tool, and can be used by anyone who has an interest in diabetes, whether they be patients, relatives, health-care professionals, or students. In 1996, during the beta-testing phase of the AIDA v4 project, the British Diabetic Association (BDA)-now called Diabetes UK-was approached and offered the AIDA software by the author, without charge, as a noncommercial contribution to continuing diabetes education. The BDA undertook their own independent assessment of the program, which involved distributing AIDA to a panel of potential end-users (health-care professionals and patients). Comments were solicited regarding the utility, clarity, and perceived safety of the software from users outside the BDA, as well as from various internal assessors. As a result of the feedback, a decision was taken by the BDA to offer AIDA to health-care professionals through the BDA's health-care professional brochure. One thousand copies of the software were produced on diskette, and 1,000 copies of the BDA's version of the program's user guide-printed as a small book-were made available for distribution by post. In this Diabetes Information Technology & WebWatch column an overview is given of the anonymous feedback provided to the BDA by some of the external evaluators. Looking back, nearly 8 years after the launch of AIDA, it is interesting to review some of the comments received and compare these with what has actually happened with the software. To date over 400,000 visits have been logged at the AIDA Web pages, and over 80,000 copies of the program have been downloaded free-of-charge. It is highlighted that this widespread downloading of, and interest in, the AIDA software seems to largely have been fuelled by the program's free availability on the Internet. The use of the World Wide Web to enhance the distribution of other medical (diabetes) programs is highlighted.

Cost Estimation of Software Development and the Implications for the Program Manager

DTIC Science & Technology

1992-06-01

Software Lifecycle Model (SLIM), the Jensen System-4 model, the Software Productivity, Quality, and Reliability Estimator ( SPQR \\20), the Constructive...function models in current use are the Software Productivity, Quality, and Reliability Estimator ( SPQR /20) and the Software Architecture Sizing and...Estimator ( SPQR /20) was developed by T. Capers Jones of Software Productivity Research, Inc., in 1985. The model is intended to estimate the outcome

Cost Reporting Elements and Activity Cost Tradeoffs for Defense System Software. Volume I. Study Results.

DTIC Science & Technology

1977-05-01

C31) programs; (4) simulator/ trainer programs ; and (5) automatic test equipment software. Each of these five types of software represents a problem...coded in the same source language, say JOVIAL, then source—language statements would be a better measure, since that would automatically compensate...whether done at no (visible) cost or by renegotiation of the contract. Fig. 2.3 illustrates these with solid lines. It is conjec- tured that the change

Software-Controlled Caches in the VMP Multiprocessor

DTIC Science & Technology

1986-03-01

programming system level that Processors is tuned for the VMP design. In this vein, we are interested in exploring how far the software support can go to ...handled in software, analogously to the handling agement of the shared program state is familiar and of virtual memory page faults. Hardware support for...ensure good behavior, as opposed to how Each cache miss results in bus traffic. Table 2 pro- vides the bus cost for the "average" cache miss. Fig

The Rapid Integration and Test Environment: A Process for Achieving Software Test Acceptance

DTIC Science & Technology

2010-05-01

Test Environment : A Process for Achieving Software Test Acceptance 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...mlif`v= 365= k^s^i=mlpqdo^ar^qb=p`elli= The Rapid Integration and Test Environment : A Process for Achieving Software Test Acceptance Patrick V...was awarded the Bronze Star. Introduction The Rapid Integration and Test Environment (RITE) initiative, implemented by the Program Executive Office

Project based, Collaborative, Algorithmic Robotics for High School Students: Programming Self Driving Race Cars at MIT

DTIC Science & Technology

2017-02-19

software systems: the students design and build robotics software towards real-world applications, without being distracted by hardware issues; (ii) it...high school students require the students to focus on building and integrating the hardware that make up the robot, at the expense of designing and...robotics programs focus on the mechanics; as a result, they do not have room for students to design and implement relatively complex software systems, as

Scalability and Validation of Big Data Bioinformatics Software.

PubMed

Yang, Andrian; Troup, Michael; Ho, Joshua W K

2017-01-01

This review examines two important aspects that are central to modern big data bioinformatics analysis - software scalability and validity. We argue that not only are the issues of scalability and validation common to all big data bioinformatics analyses, they can be tackled by conceptually related methodological approaches, namely divide-and-conquer (scalability) and multiple executions (validation). Scalability is defined as the ability for a program to scale based on workload. It has always been an important consideration when developing bioinformatics algorithms and programs. Nonetheless the surge of volume and variety of biological and biomedical data has posed new challenges. We discuss how modern cloud computing and big data programming frameworks such as MapReduce and Spark are being used to effectively implement divide-and-conquer in a distributed computing environment. Validation of software is another important issue in big data bioinformatics that is often ignored. Software validation is the process of determining whether the program under test fulfils the task for which it was designed. Determining the correctness of the computational output of big data bioinformatics software is especially difficult due to the large input space and complex algorithms involved. We discuss how state-of-the-art software testing techniques that are based on the idea of multiple executions, such as metamorphic testing, can be used to implement an effective bioinformatics quality assurance strategy. We hope this review will raise awareness of these critical issues in bioinformatics.

Validation of software for calculating the likelihood ratio for parentage and kinship.

PubMed

Drábek, J

2009-03-01

Although the likelihood ratio is a well-known statistical technique, commercial off-the-shelf (COTS) software products for its calculation are not sufficiently validated to suit general requirements for the competence of testing and calibration laboratories (EN/ISO/IEC 17025:2005 norm) per se. The software in question can be considered critical as it directly weighs the forensic evidence allowing judges to decide on guilt or innocence or to identify person or kin (i.e.: in mass fatalities). For these reasons, accredited laboratories shall validate likelihood ratio software in accordance with the above norm. To validate software for calculating the likelihood ratio in parentage/kinship scenarios I assessed available vendors, chose two programs (Paternity Index and familias) for testing, and finally validated them using tests derived from elaboration of the available guidelines for the field of forensics, biomedicine, and software engineering. MS Excel calculation using known likelihood ratio formulas or peer-reviewed results of difficult paternity cases were used as a reference. Using seven testing cases, it was found that both programs satisfied the requirements for basic paternity cases. However, only a combination of two software programs fulfills the criteria needed for our purpose in the whole spectrum of functions under validation with the exceptions of providing algebraic formulas in cases of mutation and/or silent allele.

Development of automation software for neutron activation analysis process in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Rahman, N. A. A.; Ibrahim, M. M.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.

2017-01-01

Neutron Activation Analysis (NAA) process has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s. Most of the procedures established especially from sample registration to sample analysis are performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient. Hence, a software to support the system automation is developed to provide an effective method to replace redundant manual data entries and produce faster sample analysis and calculation process. This paper describes the design and development of automation software for NAA process which consists of three sub-programs. The sub-programs are sample registration, hardware control and data acquisition; and sample analysis. The data flow and connection between the sub-programs will be explained. The software is developed by using National Instrument LabView development package.

A data dictionary approach to multilingual documentation and decision support for the diagnosis of acute abdominal pain. (COPERNICUS 555, an European concerted action).

PubMed

Ohmann, C; Eich, H P; Sippel, H

1998-01-01

This paper describes the design and development of a multilingual documentation and decision support system for the diagnosis of acute abdominal pain. The work was performed within a multi-national COPERNICUS European concerted action dealing with information technology for quality assurance in acute abdominal pain in Europe (EURO-AAP, 555). The software engineering was based on object-oriented analysis design and programming. The program cover three modules: a data dictionary, a documentation program and a knowledge based system. National versions of the software were provided and introduced into 16 centers from Central and Eastern Europe. A prospective data collection was performed in which 4020 patients were recruited. The software design has been proven to be very efficient and useful for the development of multilingual software.

Offline software for the DAMPE experiment

NASA Astrophysics Data System (ADS)

Wang, Chi; Liu, Dong; Wei, Yifeng; Zhang, Zhiyong; Zhang, Yunlong; Wang, Xiaolian; Xu, Zizong; Huang, Guangshun; Tykhonov, Andrii; Wu, Xin; Zang, Jingjing; Liu, Yang; Jiang, Wei; Wen, Sicheng; Wu, Jian; Chang, Jin

2017-10-01

A software system has been developed for the DArk Matter Particle Explorer (DAMPE) mission, a satellite-based experiment. The DAMPE software is mainly written in C++ and steered using a Python script. This article presents an overview of the DAMPE offline software, including the major architecture design and specific implementation for simulation, calibration and reconstruction. The whole system has been successfully applied to DAMPE data analysis. Some results obtained using the system, from simulation and beam test experiments, are presented. Supported by Chinese 973 Program (2010CB833002), the Strategic Priority Research Program on Space Science of the Chinese Academy of Science (CAS) (XDA04040202-4), the Joint Research Fund in Astronomy under cooperative agreement between the National Natural Science Foundation of China (NSFC) and CAS (U1531126) and 100 Talents Program of the Chinese Academy of Science

Software in the Classroom: Issues in the Design of Effective Software Tools. Technical Report No. 15.

ERIC Educational Resources Information Center

Kurland, D. Midian

This paper identifies three ways that computers are used in educational contexts. The first and most widespread use is as a tutor, i.e., as a delivery system for programmed instruction and drill-and-practice activities. The second use is as a programming environment to teach programming languages such as BASIC, LOGO, or PASCAL. The third use is as…

Software Project Management

DTIC Science & Technology

1989-07-01

incorporated into the sys- Kotler88 tem. Several interesting concepts are presented, but Kotler , P. Marketing Planning: Analysis, Planning, the bulk of the...Metzger87 Mantei, M. "The Effect of Programming Team Metzger, Philip W. Managing Programming Structures on Programming Tasks." Comm. ACM People: A Personal... Philips . Software Engi- Classic approach in organization theory. neering. Englewood Cliffs, N.J.: Prentice-Hall, 1988. Shannon75 An industrial approach

Standard practices for the implementation of computer software

NASA Technical Reports Server (NTRS)

Irvine, A. P. (Editor)

1978-01-01

A standard approach to the development of computer program is provided that covers the file cycle of software development from the planning and requirements phase through the software acceptance testing phase. All documents necessary to provide the required visibility into the software life cycle process are discussed in detail.

The New Microcomputer Development Technology: Implications for the Economics Instructor and Software Author.

ERIC Educational Resources Information Center

Boyd, David W.

1993-01-01

Asserts that a new generation of software authoring applications has led to improvements in the development of economics education software. Describes new software development applications and discusses how to use them. Concludes that object-oriented programming helps economists develop their own courseware. (CFR)

A methodology for producing reliable software, volume 1

NASA Technical Reports Server (NTRS)

Stucki, L. G.; Moranda, P. B.; Foshee, G.; Kirchoff, M.; Omre, R.

1976-01-01

An investigation into the areas having an impact on producing reliable software including automated verification tools, software modeling, testing techniques, structured programming, and management techniques is presented. This final report contains the results of this investigation, analysis of each technique, and the definition of a methodology for producing reliable software.

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. (2) Computer software, as used in this clause, means (i) computer programs which are data... software. The term “data” does not include data incidental to the administration of this contract, such as... this clause, means data, other than computer software, developed at private expense that embody trade...

SUNREL Energy Simulation Software | Buildings | NREL

Science.gov Websites

SUNREL Energy Simulation Software SUNREL Energy Simulation Software SUNREL® is a hourly building energy simulation program that aids in the design of small energy-efficient buildings where the loads are

Trends in software reliability for digital flight control

NASA Technical Reports Server (NTRS)

Hecht, H.; Hecht, M.

1983-01-01

Software error data of major recent Digital Flight Control Systems Development Programs. The report summarizes the data, compare these data with similar data from previous surveys and identifies trends and disciplines to improve software reliability.

Space shuttle orbiter avionics software: Post review report for the entry FACI (First Article Configuration Inspection). [including orbital flight tests integrated system

NASA Technical Reports Server (NTRS)

Markos, H.

1978-01-01

Status of the computer programs dealing with space shuttle orbiter avionics is reported. Specific topics covered include: delivery status; SSW software; SM software; DL software; GNC software; level 3/4 testing; level 5 testing; performance analysis, SDL readiness for entry first article configuration inspection; and verification assessment.

Reuse at the Software Productivity Consortium

NASA Technical Reports Server (NTRS)

Weiss, David M.

1989-01-01

The Software Productivity Consortium is sponsored by 14 aerospace companies as a developer of software engineering methods and tools. Software reuse and prototyping are currently the major emphasis areas. The Methodology and Measurement Project in the Software Technology Exploration Division has developed some concepts for reuse which they intend to develop into a synthesis process. They have identified two approaches to software reuse: opportunistic and systematic. The assumptions underlying the systematic approach, phrased as hypotheses, are the following: the redevelopment hypothesis, i.e., software developers solve the same problems repeatedly; the oracle hypothesis, i.e., developers are able to predict variations from one redevelopment to others; and the organizational hypothesis, i.e., software must be organized according to behavior and structure to take advantage of the predictions that the developers make. The conceptual basis for reuse includes: program families, information hiding, abstract interfaces, uses and information hiding hierarchies, and process structure. The primary reusable software characteristics are black-box descriptions, structural descriptions, and composition and decomposition based on program families. Automated support can be provided for systematic reuse, and the Consortium is developing a prototype reuse library and guidebook. The software synthesis process that the Consortium is aiming toward includes modeling, refinement, prototyping, reuse, assessment, and new construction.

Authoring and Hypermedia.

ERIC Educational Resources Information Center

Lieberth, Ann K.; Martin, Doug R.

1995-01-01

Because of the diversity of clients served by speech-language pathologists and audiologists, available commercial software may not meet all needs. Authoring programs allow the clinician to design software that can be customized for individual clients. This article describes an authoring program called HyperCard and its use in preparing hypermedia…

Data synthesis and display programs for wave distribution function analysis

NASA Technical Reports Server (NTRS)

Storey, L. R. O.; Yeh, K. J.

1992-01-01

At the National Space Science Data Center (NSSDC) software was written to synthesize and display artificial data for use in developing the methodology of wave distribution analysis. The software comprises two separate interactive programs, one for data synthesis and the other for data display.

AOIPS 3 user's guide. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

1990-01-01

The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

Airborne antenna pattern calculations

NASA Technical Reports Server (NTRS)

Knerr, T. J.; Mielke, R. R.

1981-01-01

Progress on the development of modeling software, testing software against caclulated data from program VPAP and measured patterns, and calculating roll plane patterns for general aviation aircraft is reported. Major objectives are the continued development of computer software for aircraft modeling and use of this software and program OSUVOL to calculate principal plane and volumetric radiation patterns. The determination of proper placement of antennas on aircraft to meet the requirements of the Microwave Landing System is discussed. An overview of the performed work, and an example of a roll plane model for the Piper PA-31T Cheyenne aircraft and the resulting calculated roll plane radiation pattern are included.

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

Design of the software development and verification system (SWDVS) for shuttle NASA study task 35

NASA Technical Reports Server (NTRS)

Drane, L. W.; Mccoy, B. J.; Silver, L. W.

1973-01-01

An overview of the Software Development and Verification System (SWDVS) for the space shuttle is presented. The design considerations, goals, assumptions, and major features of the design are examined. A scenario that shows three persons involved in flight software development using the SWDVS in response to a program change request is developed. The SWDVS is described from the standpoint of different groups of people with different responsibilities in the shuttle program to show the functional requirements that influenced the SWDVS design. The software elements of the SWDVS that satisfy the requirements of the different groups are identified.

Developing high-quality educational software.

PubMed

Johnson, Lynn A; Schleyer, Titus K L

2003-11-01

The development of effective educational software requires a systematic process executed by a skilled development team. This article describes the core skills required of the development team members for the six phases of successful educational software development. During analysis, the foundation of product development is laid including defining the audience and program goals, determining hardware and software constraints, identifying content resources, and developing management tools. The design phase creates the specifications that describe the user interface, the sequence of events, and the details of the content to be displayed. During development, the pieces of the educational program are assembled. Graphics and other media are created, video and audio scripts written and recorded, the program code created, and support documentation produced. Extensive testing by the development team (alpha testing) and with students (beta testing) is conducted. Carefully planned implementation is most likely to result in a flawless delivery of the educational software and maintenance ensures up-to-date content and software. Due to the importance of the sixth phase, evaluation, we have written a companion article on it that follows this one. The development of a CD-ROM product is described including the development team, a detailed description of the development phases, and the lessons learned from the project.

PsyToolkit: a software package for programming psychological experiments using Linux.

PubMed

Stoet, Gijsbert

2010-11-01

PsyToolkit is a set of software tools for programming psychological experiments on Linux computers. Given that PsyToolkit is freely available under the Gnu Public License, open source, and designed such that it can easily be modified and extended for individual needs, it is suitable not only for technically oriented Linux users, but also for students, researchers on small budgets, and universities in developing countries. The software includes a high-level scripting language, a library for the programming language C, and a questionnaire presenter. The software easily integrates with other open source tools, such as the statistical software package R. PsyToolkit is designed to work with external hardware (including IoLab and Cedrus response keyboards and two common digital input/output boards) and to support millisecond timing precision. Four in-depth examples explain the basic functionality of PsyToolkit. Example 1 demonstrates a stimulus-response compatibility experiment. Example 2 demonstrates a novel mouse-controlled visual search experiment. Example 3 shows how to control light emitting diodes using PsyToolkit, and Example 4 shows how to build a light-detection sensor. The last two examples explain the electronic hardware setup such that they can even be used with other software packages.

Orbiter subsystem hardware/software interaction analysis. Volume 8: AFT reaction control system, part 2

NASA Technical Reports Server (NTRS)

Becker, D. D.

1980-01-01

The orbiter subsystems and interfacing program elements which interact with the orbiter computer flight software are analyzed. The failure modes identified in the subsystem/element failure mode and effects analysis are examined. Potential interaction with the software is examined through an evaluation of the software requirements. The analysis is restricted to flight software requirements and excludes utility/checkout software. The results of the hardware/software interaction analysis for the forward reaction control system are presented.

Clinical software development for the Web: lessons learned from the BOADICEA project

PubMed Central

2012-01-01

Background In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use the Web to deliver them. Whilst this open-source component-based approach has undoubtedly made clinical software development easier, clinical software projects are still hampered by problems that traditionally accompany the software process. This study describes the development of the BOADICEA Web Application, a computer program used by clinical geneticists to assess risks to patients with a family history of breast and ovarian cancer. The key challenge of the BOADICEA Web Application project was to deliver a program that was safe, secure and easy for healthcare professionals to use. We focus on the software process, problems faced, and lessons learned. Our key objectives are: (i) to highlight key clinical software development issues; (ii) to demonstrate how software engineering tools and techniques can facilitate clinical software development for the benefit of individuals who lack software engineering expertise; and (iii) to provide a clinical software development case report that can be used as a basis for discussion at the start of future projects. Results We developed the BOADICEA Web Application using an evolutionary software process. Our approach to Web implementation was conservative and we used conventional software engineering tools and techniques. The principal software development activities were: requirements, design, implementation, testing, documentation and maintenance. The BOADICEA Web Application has now been widely adopted by clinical geneticists and researchers. BOADICEA Web Application version 1 was released for general use in November 2007. By May 2010, we had > 1200 registered users based in the UK, USA, Canada, South America, Europe, Africa, Middle East, SE Asia, Australia and New Zealand. Conclusions We found that an evolutionary software process was effective when we developed the BOADICEA Web Application. The key clinical software development issues identified during the BOADICEA Web Application project were: software reliability, Web security, clinical data protection and user feedback. PMID:22490389

Clinical software development for the Web: lessons learned from the BOADICEA project.

PubMed

Cunningham, Alex P; Antoniou, Antonis C; Easton, Douglas F

2012-04-10

In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use the Web to deliver them. Whilst this open-source component-based approach has undoubtedly made clinical software development easier, clinical software projects are still hampered by problems that traditionally accompany the software process. This study describes the development of the BOADICEA Web Application, a computer program used by clinical geneticists to assess risks to patients with a family history of breast and ovarian cancer. The key challenge of the BOADICEA Web Application project was to deliver a program that was safe, secure and easy for healthcare professionals to use. We focus on the software process, problems faced, and lessons learned. Our key objectives are: (i) to highlight key clinical software development issues; (ii) to demonstrate how software engineering tools and techniques can facilitate clinical software development for the benefit of individuals who lack software engineering expertise; and (iii) to provide a clinical software development case report that can be used as a basis for discussion at the start of future projects. We developed the BOADICEA Web Application using an evolutionary software process. Our approach to Web implementation was conservative and we used conventional software engineering tools and techniques. The principal software development activities were: requirements, design, implementation, testing, documentation and maintenance. The BOADICEA Web Application has now been widely adopted by clinical geneticists and researchers. BOADICEA Web Application version 1 was released for general use in November 2007. By May 2010, we had > 1200 registered users based in the UK, USA, Canada, South America, Europe, Africa, Middle East, SE Asia, Australia and New Zealand. We found that an evolutionary software process was effective when we developed the BOADICEA Web Application. The key clinical software development issues identified during the BOADICEA Web Application project were: software reliability, Web security, clinical data protection and user feedback.

Using a graphical programming language to write CAMAC/GPIB instrument drivers

NASA Technical Reports Server (NTRS)

Zambrana, Horacio; Johanson, William

1991-01-01

To reduce the complexities of conventional programming, graphical software was used in the development of instrumentation drivers. The graphical software provides a standard set of tools (graphical subroutines) which are sufficient to program the most sophisticated CAMAC/GPIB drivers. These tools were used and instrumentation drivers were successfully developed for operating CAMAC/GPIB hardware from two different manufacturers: LeCroy and DSP. The use of these tools is presented for programming a LeCroy A/D Waveform Analyzer.

Microprocessor control system for 200-kilowatt Mod-OA wind turbines

NASA Technical Reports Server (NTRS)

Nyland, T. W.; Birchenough, A. G.

1982-01-01

The microprocessor system and program used to control the operation of the 200-kW Mod-OA wind turbines is described. The system is programmed to begin startup and shutdown sequences automatically and to control yaw motion. Rotor speed and power output are controlled with integral and proportional control of the blade pitch angle. Included in the report are a description of the hardware and a discussion of the software programming technique. A listing of the PL/M software program is given.

Portable Medical Laboratory Applications Software

PubMed Central

Silbert, Jerome A.

1983-01-01

Portability implies that a program can be run on a variety of computers with minimal software revision. The advantages of portability are outlined and design considerations for portable laboratory software are discussed. Specific approaches for achieving this goal are presented.

Standardized development of computer software. Part 1: Methods

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

This work is a two-volume set on standards for modern software engineering methodology. This volume presents a tutorial and practical guide to the efficient development of reliable computer software, a unified and coordinated discipline for design, coding, testing, documentation, and project organization and management. The aim of the monograph is to provide formal disciplines for increasing the probability of securing software that is characterized by high degrees of initial correctness, readability, and maintainability, and to promote practices which aid in the consistent and orderly development of a total software system within schedule and budgetary constraints. These disciplines are set forth as a set of rules to be applied during software development to drastically reduce the time traditionally spent in debugging, to increase documentation quality, to foster understandability among those who must come in contact with it, and to facilitate operations and alterations of the program as requirements on the program environment change.

Implementation of AAPG exchange format

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiser, K.; Guerrero, I.

1989-03-01

The American Association of Petroleum Geologists (AAPG) has proposed a format for exchanging geologic and other petroleum data. The AAPG Computer Applications Committee approved the proposal at the March 1988 AAPG annual meeting in Houston, Texas. By adopting this format, data input into application software and data exchange between software packages are greatly simplified. Benefits to both users and suppliers of software are substantial. The AAPG exchange format supports a flexible, generic data structure. This flexibility allows application software to use the standard format for storing internal control data. In some cases, extensions to the standard format, such as separationmore » of header and data files and use of data delimiters, permits the use of AAPG format translator programs on data that were defined and generated before the emergence of the exchange format. Translation software, programmed in C, has been written and contributes to successful implementation of the AAPG exchange format in application software.« less

A component-based software environment for visualizing large macromolecular assemblies.

PubMed

Sanner, Michel F

2005-03-01

The interactive visualization of large biological assemblies poses a number of challenging problems, including the development of multiresolution representations and new interaction methods for navigating and analyzing these complex systems. An additional challenge is the development of flexible software environments that will facilitate the integration and interoperation of computational models and techniques from a wide variety of scientific disciplines. In this paper, we present a component-based software development strategy centered on the high-level, object-oriented, interpretive programming language: Python. We present several software components, discuss their integration, and describe some of their features that are relevant to the visualization of large molecular assemblies. Several examples are given to illustrate the interoperation of these software components and the integration of structural data from a variety of experimental sources. These examples illustrate how combining visual programming with component-based software development facilitates the rapid prototyping of novel visualization tools.

An experiment in software reliability

NASA Technical Reports Server (NTRS)

Dunham, J. R.; Pierce, J. L.

1986-01-01

The results of a software reliability experiment conducted in a controlled laboratory setting are reported. The experiment was undertaken to gather data on software failures and is one in a series of experiments being pursued by the Fault Tolerant Systems Branch of NASA Langley Research Center to find a means of credibly performing reliability evaluations of flight control software. The experiment tests a small sample of implementations of radar tracking software having ultra-reliability requirements and uses n-version programming for error detection, and repetitive run modeling for failure and fault rate estimation. The experiment results agree with those of Nagel and Skrivan in that the program error rates suggest an approximate log-linear pattern and the individual faults occurred with significantly different error rates. Additional analysis of the experimental data raises new questions concerning the phenomenon of interacting faults. This phenomenon may provide one explanation for software reliability decay.

Problem Solving Software for Math Classes.

ERIC Educational Resources Information Center

Troutner, Joanne

1987-01-01

Described are 10 computer software programs for problem solving related to mathematics. Programs described are: (1) Box Solves Story Problems; (2) Safari Search; (3) Puzzle Tanks; (4) The King's Rule; (5) The Factory; (6) The Royal Rules; (7) The Enchanted Forest; (8) Gears; (9) The Super Factory; and (10) Creativity Unlimited. (RH)

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviews three computer software programs: (1) "The Children's Writing and Publishing Center"--writing and creative arts, grades 2-8, Apple II; (2) "Slide Shop"--graphics and desktop presentations, grades 4-12, Apple II and IBM; and (3) "Solve It"--problem solving and language arts, grades 4-12, Apple II. (MVL)

Improving DHH Students' Grammar through an Individualized Software Program

ERIC Educational Resources Information Center

Cannon, Joanna E.; Easterbrooks, Susan R.; Gagne, Phill; Beal-Alvarez, Jennifer

2011-01-01

The purpose of this study was to determine if the frequent use of a targeted, computer software grammar instruction program, used as an individualized classroom activity, would influence the comprehension of morphosyntax structures (determiners, tense, and complementizers) in deaf/hard-of-hearing (DHH) participants who use American Sign Language…

Screen Miniatures as Icons for Backward Navigation in Content-Based Software.

ERIC Educational Resources Information Center

Boling, Elizabeth; Ma, Guoping; Tao, Chia-Wen; Askun, Cengiz; Green, Tim; Frick, Theodore; Schaumburg, Heike

Users of content-based software programs, including hypertexts and instructional multimedia, rely on the navigation functions provided by the designers of those program. Typical navigation schemes use abstract symbols (arrows) to label basic navigational functions like moving forward or backward through screen displays. In a previous study, the…

Guidelines for Software Engineering Education Version 1.0

DTIC Science & Technology

1999-11-01

Turbo Pascal and Software Design. Sudbury, Massachusetts: Jones and Bartlett, 1997. " Deitel, Harvey M. & Deitel, Paul J. C++: How to Program . Upper...Saddle River, New Jersey: Prentice-Hall, 1997. " Deitel, Harvey M. & Deitel, Paul J. Java: How to Program . Upper Saddle River, New Jersey: Prentice-Hall

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Classroom Computer Learning, 1989

1989-01-01

Reviewed are three computer software programs: (1) "World GeoGraph"--geography, discovery tool, grades 6-12, Apple IIGS; (2) "Grammatik III"--language arts, grade 7-adult, IBM, PS/2, Tandy 1000; (3) "Words & Concepts I, II, III"--language and concept training for special education, age 3-9, Apple II with speech…

Survey of Latin Instructional Software for the Microcomputer.

ERIC Educational Resources Information Center

Latousek, Robert B., Jr.

A critical review of computer software for computer-assisted instruction (CAI) in Latin presents information regarding user-friendliness, instructiveness, special effects, costs, and availability. Survey responses of first- and second-year Latin students (N=65) at a high school provided data for the comparison of programs. Programs reviewed…

Evaluator's Guide for Word Processing Software.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton.

This guide provides a detailed evaluation form, together with complete instructions for using it, which is designed to elicit answers to the following questions: (1) What features and abilities does a specific word processing program have? (2) On which computer(s) will the program work? (3) Is additional hardware/software necessary before the…

Review of the activities of COSMIC

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

The activities of the Computer Software Management and Information Center involving the collection, processing, and distribution of software developed under the auspices of NASA and certain other federal agencies are reported. Program checkout and evaluation, inventory control, customer services and marketing, dissemination, program maintenance, and special development tasks are discussed.

COMPILATION OF SATURATED AND UNSATURATED ZONE MODELING SOFTWARE

EPA Science Inventory

The full report provides readers an overview of available ground-water modeling programs and related software. It is an update of EPA/600/R-93/118 and EPA/600/R-94/028, two previous reports from the same program at the International Ground Water Modeling Center (IGWMC) in Colora...

Meta-Analysis in Stata Using Gllamm

ERIC Educational Resources Information Center

Bagos, Pantelis G.

2015-01-01

There are several user-written programs for performing meta-analysis in Stata (Stata Statistical Software: College Station, TX: Stata Corp LP). These include metan, metareg, mvmeta, and glst. However, there are several cases for which these programs do not suffice. For instance, there is no software for performing univariate meta-analysis with…

Evaluation of Farm Accounting Software. Improved Decision Making.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

This guide contains information on 36 computer programs used for farm and ranch accounting. This information and assessment of software features were provided by the manufacturers and vendors. Information is provided on the following items, among others: program name, vendor's name and address, computer and operating system, type of accounting and…

The open-source movement: an introduction for forestry professionals

Treesearch

Patrick Proctor; Paul C. Van Deusen; Linda S. Heath; Jeffrey H. Gove

2005-01-01

In recent years, the open-source movement has yielded a generous and powerful suite of software and utilities that rivals those developed by many commercial software companies. Open-source programs are available for many scientific needs: operating systems, databases, statistical analysis, Geographic Information System applications, and object-oriented programming....

Learning Teamwork Skills in University Programming Courses

ERIC Educational Resources Information Center

Sancho-Thomas, Pilar; Fuentes-Fernandez, Ruben; Fernandez-Manjon, Baltasar

2009-01-01

University courses about computer programming usually seek to provide students not only with technical knowledge, but also with the skills required to work in real-life software projects. Nowadays, the development of software applications requires the coordinated efforts of the members of one or more teams. Therefore, it is important for software…

Concept document of the repository-based software engineering program: A constructive appraisal

NASA Technical Reports Server (NTRS)

1992-01-01

A constructive appraisal of the Concept Document of the Repository-Based Software Engineering Program is provided. The Concept Document is designed to provide an overview of the Repository-Based Software Engineering (RBSE) Program. The Document should be brief and provide the context for reading subsequent requirements and product specifications. That is, all requirements to be developed should be traceable to the Concept Document. Applied Expertise's analysis of the Document was directed toward assuring that: (1) the Executive Summary provides a clear, concise, and comprehensive overview of the Concept (rewrite as necessary); (2) the sections of the Document make best use of the NASA 'Data Item Description' for concept documents; (3) the information contained in the Document provides a foundation for subsequent requirements; and (4) the document adequately: identifies the problem being addressed; articulates RBSE's specific role; specifies the unique aspects of the program; and identifies the nature and extent of the program's users.

The Automated Programming of Electronic Displays.

DTIC Science & Technology

1986-09-01

A182 931 THE AUTOMATED PROGRAMMING OF ELECTRONIC DISPLAYSCU) 11 SOFTWARE CONSULTING SPECIALIST INC FORT MAYNE IN R W HASKER ET AL SEP 86 AFURL-TR-86...M. R. Fritsch Software Consulting Specialists , Inc. ( P. 0. Box 15367 O Fort Wayne, IN 46885 00 V September 1986 S Final Report for Period July 1985...N 05 111 0 PRO~l S AGRAM CL(CWfT.P^OJ(CV. TASK Software Consulting Specialists , Inc. ;Ms CA 01 Wol WUNSCAS P. 0. Box 15367 62201F Fort Wayne, IN

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

Software-Based Visual Loan Calculator For Banking Industry

NASA Astrophysics Data System (ADS)

Isizoh, A. N.; Anazia, A. E.; Okide, S. O. 3; Onyeyili, T. I.; Okwaraoka, C. A. P.

2012-03-01

industry is very necessary in modern day banking system using many design techniques for security reasons. This paper thus presents the software-based design and implementation of a Visual Loan calculator for banking industry using Visual Basic .Net (VB.Net). The fundamental approach to this is to develop a Graphical User Interface (GUI) using VB.Net operating tools, and then developing a working program which calculates the interest of any loan obtained. The VB.Net programming was done, implemented and the software proved satisfactory.

Provider software buyer's guide.

PubMed

1994-03-01

To help long term care providers find new ways to improve quality of care and efficiency, Provider magazine presents the fourth annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

5th Annual Provider Software Buyer's Guide.

PubMed

1995-03-01

To help long term care providers find new ways to improve quality of care and efficiency, PROVIDER presents the fifth annual listing of software firms marketing computer programs for all areas of long term care operations. On the following five pages, more than 70 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Provider software buyer's guide.

PubMed

1993-03-01

To help long term care providers find new ways to improve quality of care and efficiency. Provider magazine presents the third annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Physical Therapy Machine

NASA Technical Reports Server (NTRS)

1989-01-01

Loredan Biomedical, Inc.'s LIDO, a computerized physical therapy system, was purchased by NASA in 1985 for evaluation as a Space Station Freedom exercise program. In 1986, while involved in an ARC muscle conditioning project, Malcom Bond, Loredan's chairman, designed an advanced software package for NASA which became the basis for LIDOSOFT software used in the commercially available system. The system employs a "proprioceptive" software program which perceives internal body conditions, induces perturbations to muscular effort and evaluates the response. Biofeedback on a screen allows a patient to observe his own performance.

Inheritance for software reuse: The good, the bad, and the ugly

NASA Technical Reports Server (NTRS)

Sitaraman, Murali; Eichmann, David A.

1992-01-01

Inheritance is a powerful mechanism supported by object-oriented programming languages to facilitate modifications and extensions of reusable software components. This paper presents a taxonomy of the various purposes for which an inheritance mechanism can be used. While some uses of inheritance significantly enhance software reuse, some others are not as useful and in fact, may even be detrimental to reuse. The paper discusses several examples, and argues for a programming language design that is selective in its support for inheritance.

Framework Support For Knowledge-Based Software Development

NASA Astrophysics Data System (ADS)

Huseth, Steve

1988-03-01

The advent of personal engineering workstations has brought substantial information processing power to the individual programmer. Advanced tools and environment capabilities supporting the software lifecycle are just beginning to become generally available. However, many of these tools are addressing only part of the software development problem by focusing on rapid construction of self-contained programs by a small group of talented engineers. Additional capabilities are required to support the development of large programming systems where a high degree of coordination and communication is required among large numbers of software engineers, hardware engineers, and managers. A major player in realizing these capabilities is the framework supporting the software development environment. In this paper we discuss our research toward a Knowledge-Based Software Assistant (KBSA) framework. We propose the development of an advanced framework containing a distributed knowledge base that can support the data representation needs of tools, provide environmental support for the formalization and control of the software development process, and offer a highly interactive and consistent user interface.

Listening to the student voice to improve educational software.

PubMed

van Wyk, Mari; van Ryneveld, Linda

2017-01-01

Academics often develop software for teaching and learning purposes with the best of intentions, only to be disappointed by the low acceptance rate of the software by their students once it is implemented. In this study, the focus is on software that was designed to enable veterinary students to record their clinical skills. A pilot of the software clearly showed that the program had not been received as well as had been anticipated, and therefore the researchers used a group interview and a questionnaire with closed-ended and open-ended questions to obtain the students' feedback. The open-ended questions were analysed with conceptual content analysis, and themes were identified. Students made valuable suggestions about what they regarded as important considerations when a new software program is introduced. The most important lesson learnt was that students cannot always predict their needs accurately if they are asked for input prior to the development of software. For that reason student input should be obtained on a continuous and regular basis throughout the design and development phases.

Software Program: Software Management Guidebook

NASA Technical Reports Server (NTRS)

1996-01-01

The purpose of this NASA Software Management Guidebook is twofold. First, this document defines the core products and activities required of NASA software projects. It defines life-cycle models and activity-related methods but acknowledges that no single life-cycle model is appropriate for all NASA software projects. It also acknowledges that the appropriate method for accomplishing a required activity depends on characteristics of the software project. Second, this guidebook provides specific guidance to software project managers and team leaders in selecting appropriate life cycles and methods to develop a tailored plan for a software engineering project.

Software Configuration Management Across Project Boundaries and In Distributed Development Environments.

DTIC Science & Technology

1984-01-01

between projects and between host development systems, and between projects, using an integrated Programming Support Environment. The discussion assumes...the availability of some of the facilities that were proposed for inclusion in the UK CHAPSE (CHILL Ada Programming Support Environment). C’ Accession...life cycle of a product. In a programming support envirorment (PSE) with an underlying database, the software can be stored in the databave and

Visualization of fluid dynamics at NASA Ames

NASA Technical Reports Server (NTRS)

Watson, Val

1989-01-01

The hardware and software currently used for visualization of fluid dynamics at NASA Ames is described. The software includes programs to create scenes (for example particle traces representing the flow over an aircraft), programs to interactively view the scenes, and programs to control the creation of video tapes and 16mm movies. The hardware includes high performance graphics workstations, a high speed network, digital video equipment, and film recorders.

On the Multilevel Nature of Meta-Analysis: A Tutorial, Comparison of Software Programs, and Discussion of Analytic Choices.

PubMed

Pastor, Dena A; Lazowski, Rory A

2018-01-01

The term "multilevel meta-analysis" is encountered not only in applied research studies, but in multilevel resources comparing traditional meta-analysis to multilevel meta-analysis. In this tutorial, we argue that the term "multilevel meta-analysis" is redundant since all meta-analysis can be formulated as a special kind of multilevel model. To clarify the multilevel nature of meta-analysis the four standard meta-analytic models are presented using multilevel equations and fit to an example data set using four software programs: two specific to meta-analysis (metafor in R and SPSS macros) and two specific to multilevel modeling (PROC MIXED in SAS and HLM). The same parameter estimates are obtained across programs underscoring that all meta-analyses are multilevel in nature. Despite the equivalent results, not all software programs are alike and differences are noted in the output provided and estimators available. This tutorial also recasts distinctions made in the literature between traditional and multilevel meta-analysis as differences between meta-analytic choices, not between meta-analytic models, and provides guidance to inform choices in estimators, significance tests, moderator analyses, and modeling sequence. The extent to which the software programs allow flexibility with respect to these decisions is noted, with metafor emerging as the most favorable program reviewed.

48 CFR 252.227-7025 - Limitations on the use or disclosure of government-furnished information marked with restrictive...

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7025 - Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive...

Code of Federal Regulations, 2013 CFR

2013-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7025 - Limitations on the use or disclosure of government-furnished information marked with restrictive...

Code of Federal Regulations, 2012 CFR

2012-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7025 - Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive...

Code of Federal Regulations, 2014 CFR

2014-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

Effects of the Meetings-Flow Approach on Quality Teamwork in the Training of Software Capstone Projects

ERIC Educational Resources Information Center

Chen, Chung-Yang; Hong, Ya-Chun; Chen, Pei-Chi

2014-01-01

Software development relies heavily on teamwork; determining how to streamline this collaborative development is an essential training subject in computer and software engineering education. A team process known as the meetings-flow (MF) approach has recently been introduced in software capstone projects in engineering programs at various…

Bytes and Bias: Eliminating Cultural Stereotypes from Educational Software.

ERIC Educational Resources Information Center

Miller-Lachmann, Lyn

1994-01-01

Presents a 10-point checklist for choosing children's educational software that is free of cultural bias. Each point is illustrated with examples drawn from currently available software. A sidebar lists 25 educational software programs in the areas of social studies, ecology, math and logic, and language arts from which examples were drawn. (three…

A NASA-wide approach toward cost-effective, high-quality software through reuse

NASA Technical Reports Server (NTRS)

Scheper, Charlotte O. (Editor); Smith, Kathryn A. (Editor)

1993-01-01

NASA Langley Research Center sponsored the second Workshop on NASA Research in Software Reuse on May 5-6, 1992 at the Research Triangle Park, North Carolina. The workshop was hosted by the Research Triangle Institute. Participants came from the three NASA centers, four NASA contractor companies, two research institutes and the Air Force's Rome Laboratory. The purpose of the workshop was to exchange information on software reuse tool development, particularly with respect to tool needs, requirements, and effectiveness. The participants presented the software reuse activities and tools being developed and used by their individual centers and programs. These programs address a wide range of reuse issues. The group also developed a mission and goals for software reuse within NASA. This publication summarizes the presentations and the issues discussed during the workshop.

Software Construction and Analysis Tools for Future Space Missions

NASA Technical Reports Server (NTRS)

Lowry, Michael R.; Clancy, Daniel (Technical Monitor)

2002-01-01

NASA and its international partners will increasingly depend on software-based systems to implement advanced functions for future space missions, such as Martian rovers that autonomously navigate long distances exploring geographic features formed by surface water early in the planet's history. The software-based functions for these missions will need to be robust and highly reliable, raising significant challenges in the context of recent Mars mission failures attributed to software faults. After reviewing these challenges, this paper describes tools that have been developed at NASA Ames that could contribute to meeting these challenges; 1) Program synthesis tools based on automated inference that generate documentation for manual review and annotations for automated certification. 2) Model-checking tools for concurrent object-oriented software that achieve memorability through synergy with program abstraction and static analysis tools.

Software Formal Inspections Guidebook

NASA Technical Reports Server (NTRS)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

Software Analyzes Complex Systems in Real Time

NASA Technical Reports Server (NTRS)

2008-01-01

Expert system software programs, also known as knowledge-based systems, are computer programs that emulate the knowledge and analytical skills of one or more human experts, related to a specific subject. SHINE (Spacecraft Health Inference Engine) is one such program, a software inference engine (expert system) designed by NASA for the purpose of monitoring, analyzing, and diagnosing both real-time and non-real-time systems. It was developed to meet many of the Agency s demanding and rigorous artificial intelligence goals for current and future needs. NASA developed the sophisticated and reusable software based on the experience and requirements of its Jet Propulsion Laboratory s (JPL) Artificial Intelligence Research Group in developing expert systems for space flight operations specifically, the diagnosis of spacecraft health. It was designed to be efficient enough to operate in demanding real time and in limited hardware environments, and to be utilized by non-expert systems applications written in conventional programming languages. The technology is currently used in several ongoing NASA applications, including the Mars Exploration Rovers and the Spacecraft Health Automatic Reasoning Pilot (SHARP) program for the diagnosis of telecommunication anomalies during the Neptune Voyager Encounter. It is also finding applications outside of the Space Agency.

Open source software in a practical approach for post processing of radiologic images.

PubMed

Valeri, Gianluca; Mazza, Francesco Antonino; Maggi, Stefania; Aramini, Daniele; La Riccia, Luigi; Mazzoni, Giovanni; Giovagnoni, Andrea

2015-03-01

The purpose of this paper is to evaluate the use of open source software (OSS) to process DICOM images. We selected 23 programs for Windows and 20 programs for Mac from 150 possible OSS programs including DICOM viewers and various tools (converters, DICOM header editors, etc.). The programs selected all meet the basic requirements such as free availability, stand-alone application, presence of graphical user interface, ease of installation and advanced features beyond simple display monitor. Capabilities of data import, data export, metadata, 2D viewer, 3D viewer, support platform and usability of each selected program were evaluated on a scale ranging from 1 to 10 points. Twelve programs received a score higher than or equal to eight. Among them, five obtained a score of 9: 3D Slicer, MedINRIA, MITK 3M3, VolView, VR Render; while OsiriX received 10. OsiriX appears to be the only program able to perform all the operations taken into consideration, similar to a workstation equipped with proprietary software, allowing the analysis and interpretation of images in a simple and intuitive way. OsiriX is a DICOM PACS workstation for medical imaging and software for image processing for medical research, functional imaging, 3D imaging, confocal microscopy and molecular imaging. This application is also a good tool for teaching activities because it facilitates the attainment of learning objectives among students and other specialists.

TES: A modular systems approach to expert system development for real-time space applications

NASA Technical Reports Server (NTRS)

Cacace, Ralph; England, Brenda

1988-01-01

A major goal of the Space Station era is to reduce reliance on support from ground based experts. The development of software programs using expert systems technology is one means of reaching this goal without requiring crew members to become intimately familiar with the many complex spacecraft subsystems. Development of an expert systems program requires a validation of the software with actual flight hardware. By combining accurate hardware and software modelling techniques with a modular systems approach to expert systems development, the validation of these software programs can be successfully completed with minimum risk and effort. The TIMES Expert System (TES) is an application that monitors and evaluates real time data to perform fault detection and fault isolation tasks as they would otherwise be carried out by a knowledgeable designer. The development process and primary features of TES, a modular systems approach, and the lessons learned are discussed.

Precise and Scalable Static Program Analysis of NASA Flight Software

NASA Technical Reports Server (NTRS)

Brat, G.; Venet, A.

2005-01-01

Recent NASA mission failures (e.g., Mars Polar Lander and Mars Orbiter) illustrate the importance of having an efficient verification and validation process for such systems. One software error, as simple as it may be, can cause the loss of an expensive mission, or lead to budget overruns and crunched schedules. Unfortunately, traditional verification methods cannot guarantee the absence of errors in software systems. Therefore, we have developed the CGS static program analysis tool, which can exhaustively analyze large C programs. CGS analyzes the source code and identifies statements in which arrays are accessed out of bounds, or, pointers are used outside the memory region they should address. This paper gives a high-level description of CGS and its theoretical foundations. It also reports on the use of CGS on real NASA software systems used in Mars missions (from Mars PathFinder to Mars Exploration Rover) and on the International Space Station.

National Cycle Program (NCP) Common Analysis Tool for Aeropropulsion

NASA Technical Reports Server (NTRS)

Follen, G.; Naiman, C.; Evans, A.

1999-01-01

Through the NASA/Industry Cooperative Effort (NICE) agreement, NASA Lewis and industry partners are developing a new engine simulation, called the National Cycle Program (NCP), which is the initial framework of NPSS. NCP is the first phase toward achieving the goal of NPSS. This new software supports the aerothermodynamic system simulation process for the full life cycle of an engine. The National Cycle Program (NCP) was written following the Object Oriented Paradigm (C++, CORBA). The software development process used was also based on the Object Oriented paradigm. Software reviews, configuration management, test plans, requirements, design were all apart of the process used in developing NCP. Due to the many contributors to NCP, the stated software process was mandatory for building a common tool intended for use by so many organizations. The U.S. aircraft and airframe companies recognize NCP as the future industry standard for propulsion system modeling.

Interactive Web Graphs with Fewer Restrictions

NASA Technical Reports Server (NTRS)

Fiedler, James

2012-01-01

There is growing popularity for interactive, statistical web graphs and programs to generate them. However, it seems that these programs tend to be somewhat restricted in which web browsers and statistical software are supported. For example, the software might use SVG (e.g., Protovis, gridSVG) or HTML canvas, both of which exclude most versions of Internet Explorer, or the software might be made specifically for R (gridSVG, CRanvas), thus excluding users of other stats software. There are more general tools (d3, Rapha lJS) which are compatible with most browsers, but using one of these to make statistical graphs requires more coding than is probably desired, and requires learning a new tool. This talk will present a method for making interactive web graphs, which, by design, attempts to support as many browsers and as many statistical programs as possible, while also aiming to be relatively easy to use and relatively easy to extend.

Software design of a remote real-time ECG monitoring system

NASA Astrophysics Data System (ADS)

Yu, Chengbo; Tao, Hongyan

2005-12-01

Heart disease is one of the main diseases that threaten the health and lives of human beings. At present, the normal remote ECG monitoring system has the disadvantages of a short testing distance and limitation of monitoring lines. Because of accident and paroxysmal disease, ECG monitoring has extended from the hospital to the family. Therefore, remote ECG monitoring through the Internet has the actual value and significance. The principle and design method of software of the remote dynamic ECG monitor was presented and discussed. The monitoring software is programmed with Delphi software based on client-sever interactive mode. The application program of the system, which makes use of multithreading technology, is shown to perform in an excellent manner. The program includes remote link users and ECG processing, i.e. ECG data's receiving, real-time displaying, recording and replaying. The system can connect many clients simultaneously and perform real-time monitoring to patients.

Software Reviews.

ERIC Educational Resources Information Center

Wulfson, Stephen

1988-01-01

Presents reviews of six computer software programs for teaching science. Provides the publisher, grade level, cost, and descriptions of software, including: (1) "Recycling Logic"; (2) "Introduction to Biochemistry"; (3) "Food for Thought"; (4) "Watts in a Home"; (5) "Geology in Action"; and (6)…

Ensemble Eclipse: A Process for Prefab Development Environment for the Ensemble Project

NASA Technical Reports Server (NTRS)

Wallick, Michael N.; Mittman, David S.; Shams, Khawaja, S.; Bachmann, Andrew G.; Ludowise, Melissa

2013-01-01

This software simplifies the process of having to set up an Eclipse IDE programming environment for the members of the cross-NASA center project, Ensemble. It achieves this by assembling all the necessary add-ons and custom tools/preferences. This software is unique in that it allows developers in the Ensemble Project (approximately 20 to 40 at any time) across multiple NASA centers to set up a development environment almost instantly and work on Ensemble software. The software automatically has the source code repositories and other vital information and settings included. The Eclipse IDE is an open-source development framework. The NASA (Ensemble-specific) version of the software includes Ensemble-specific plug-ins as well as settings for the Ensemble project. This software saves developers the time and hassle of setting up a programming environment, making sure that everything is set up in the correct manner for Ensemble development. Existing software (i.e., standard Eclipse) requires an intensive setup process that is both time-consuming and error prone. This software is built once by a single user and tested, allowing other developers to simply download and use the software

The Application of Software Safety to the Constellation Program Launch Control System

NASA Technical Reports Server (NTRS)

Kania, James; Hill, Janice

2011-01-01

The application of software safety practices on the LCS project resulted in the successful implementation of the NASA Software Safety Standard NASA-STD-8719.138 and CxP software safety requirements. The GOP-GEN-GSW-011 Hazard Report was the first report developed at KSC to identify software hazard causes and their controls. This approach can be applied to similar large software - intensive systems where loss of control can lead to a hazard.

Enhancement to Hitran to Support the NASA EOS Program

NASA Technical Reports Server (NTRS)

Kirby, Kate P.; Rothman, Laurence S.

1998-01-01

The HITRAN molecular database has been enhanced with the object of providing improved capabilities for the EOS program scientists. HITRAN itself is the database of high-resolution line parameters of gaseous species expected to be observed by the EOS program in its remote sensing activities. The database is part of a larger compilation that includes IR cross-sections, aerosol indices of refraction, and software for filtering and plotting portions of the database. These properties have also been improved. The software has been advanced in order to work on multiple platforms. Besides the delivery of the compilation on CD-ROM, the effort has been directed toward making timely access of data and software on the world wide web.

Software engineering aspects of real-time programming concepts

NASA Astrophysics Data System (ADS)

Schoitsch, Erwin

1986-08-01

Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

Enhancement to HITRAN to Support the NASA EOS Program

NASA Technical Reports Server (NTRS)

Kirby, Kate P.; Rothman, Laurence S.

1999-01-01

The HITRAN molecular database has been enhanced with the object of providing improved capabilities for the EOS program scientists. HITRAN itself is the database of high-resolution line parameters of gaseous species expected to be observed by the EOS program in its remote sensing activities. The database is part of a larger compilation that includes IR cross-sections, aerosol indices of refraction, and software for filtering and plotting portions of the database. These properties have also been improved. The software has been advanced in order to work on multiple platforms. Besides the delivery of the compilation on CD-ROM, the effort has been directed toward making timely access of data and software on the world wide web.

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of April 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Five articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: GAP 1.0 - Groove Analysis Program, Version 1.0; SUBTRANS - Subband/Transform MATLAB Functions for Image Processing; CSDM - COLD-SAT Dynamic Model; CASRE - Computer Aided Software Reliability Estimation; and XOPPS - OEL Project Planner/Scheduler Tool. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and disseminations are also described along with a budget summary.

Advanced Chemistry Collection, 2nd Edition

NASA Astrophysics Data System (ADS)

2001-11-01

Software requirements are given in Table 3. Some programs have additional special requirements. Please see the individual program abstracts at JCE Online or the documentation included on the CD-ROM for more specific information. Table 3. General software requirements for the Advanced Chemistry Collection.

Literature Cited

1. General Chemistry Collection, 5th ed.; J. Chem. Educ. Software, 2001, SP16.
2. Advanced Chemistry Collection; J. Chem. Educ. Software, 2001, SP28.

Simulation and animation of sensor-driven robots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, C.; Trivedi, M.M.; Bidlack, C.R.

1994-10-01

Most simulation and animation systems utilized in robotics are concerned with simulation of the robot and its environment without simulation of sensors. These systems have difficulty in handling robots that utilize sensory feedback in their operation. In this paper, a new design of an environment for simulation, animation, and visualization of sensor-driven robots is presented. As sensor technology advances, increasing numbers of robots are equipped with various types of sophisticated sensors. The main goal of creating the visualization environment is to aide the automatic robot programming and off-line programming capabilities of sensor-driven robots. The software system will help the usersmore » visualize the motion and reaction of the sensor-driven robot under their control program. Therefore, the efficiency of the software development is increased, the reliability of the software and the operation safety of the robot are ensured, and the cost of new software development is reduced. Conventional computer-graphics-based robot simulation and animation software packages lack of capabilities for robot sensing simulation. This paper describes a system designed to overcome this deficiency.« less

A design methodology for portable software on parallel computers

NASA Technical Reports Server (NTRS)

Nicol, David M.; Miller, Keith W.; Chrisman, Dan A.

1993-01-01

This final report for research that was supported by grant number NAG-1-995 documents our progress in addressing two difficulties in parallel programming. The first difficulty is developing software that will execute quickly on a parallel computer. The second difficulty is transporting software between dissimilar parallel computers. In general, we expect that more hardware-specific information will be included in software designs for parallel computers than in designs for sequential computers. This inclusion is an instance of portability being sacrificed for high performance. New parallel computers are being introduced frequently. Trying to keep one's software on the current high performance hardware, a software developer almost continually faces yet another expensive software transportation. The problem of the proposed research is to create a design methodology that helps designers to more precisely control both portability and hardware-specific programming details. The proposed research emphasizes programming for scientific applications. We completed our study of the parallelizability of a subsystem of the NASA Earth Radiation Budget Experiment (ERBE) data processing system. This work is summarized in section two. A more detailed description is provided in Appendix A ('Programming Practices to Support Eventual Parallelism'). Mr. Chrisman, a graduate student, wrote and successfully defended a Ph.D. dissertation proposal which describes our research associated with the issues of software portability and high performance. The list of research tasks are specified in the proposal. The proposal 'A Design Methodology for Portable Software on Parallel Computers' is summarized in section three and is provided in its entirety in Appendix B. We are currently studying a proposed subsystem of the NASA Clouds and the Earth's Radiant Energy System (CERES) data processing system. This software is the proof-of-concept for the Ph.D. dissertation. We have implemented and measured the performance of a portion of this subsystem on the Intel iPSC/2 parallel computer. These results are provided in section four. Our future work is summarized in section five, our acknowledgements are stated in section six, and references for published papers associated with NAG-1-995 are provided in section seven.

Using the AIDA--www.2aida.org--diabetes simulator. Part 2: recommended training requirements for health-carers planning to teach with the software.

PubMed

Lehmann, Eldon D; Tatti, Patrizio

2002-01-01

The purpose of this article is to document some recommended training requirements for health-carers planning to teach using the AIDA interactive educational diabetes simulator. AIDA is a diabetes computer program that permits the interactive simulation of plasma insulin and blood glucose profiles for teaching, demonstration, and self-learning purposes. It has been made freely available, without charge, on the Internet as a noncommercial contribution to continuing diabetes education. Since its launch in 1996 over 200,000 visits have been logged at the AIDA Website--www.2aida.org--and over 40,000 copies of the AIDA program have been downloaded free-of-charge. This report describes various training requirements that are recommended for health-care professionals who are interested in teaching with the software. Intended goals of this article are to answer possible questions from teachers using the program, highlight some minimum recommended training requirements for the software, suggest some "hints and tips" for teaching ideas, explain the importance of performing more studies/trials with the program, overview randomised controlled trial usage of the software, and highlight the importance of obtaining feedback from lesson participants. The recommendations seem to be straightforward and should help in formalising training with the program, as well as in the development of a network of teachers "accredited" to give lessons using the software. This report, together with the previous article (Part 1, Diabetes Technol Ther 2002;4:401-414), highlights the utility of providing guidelines and suggesting recommended training requirements for health-carers planning to make use of educational medical/diabetes software.

A research program in empirical computer science

NASA Technical Reports Server (NTRS)

Knight, J. C.

1991-01-01

During the grant reporting period our primary activities have been to begin preparation for the establishment of a research program in experimental computer science. The focus of research in this program will be safety-critical systems. Many questions that arise in the effort to improve software dependability can only be addressed empirically. For example, there is no way to predict the performance of the various proposed approaches to building fault-tolerant software. Performance models, though valuable, are parameterized and cannot be used to make quantitative predictions without experimental determination of underlying distributions. In the past, experimentation has been able to shed some light on the practical benefits and limitations of software fault tolerance. It is common, also, for experimentation to reveal new questions or new aspects of problems that were previously unknown. A good example is the Consistent Comparison Problem that was revealed by experimentation and subsequently studied in depth. The result was a clear understanding of a previously unknown problem with software fault tolerance. The purpose of a research program in empirical computer science is to perform controlled experiments in the area of real-time, embedded control systems. The goal of the various experiments will be to determine better approaches to the construction of the software for computing systems that have to be relied upon. As such it will validate research concepts from other sources, provide new research results, and facilitate the transition of research results from concepts to practical procedures that can be applied with low risk to NASA flight projects. The target of experimentation will be the production software development activities undertaken by any organization prepared to contribute to the research program. Experimental goals, procedures, data analysis and result reporting will be performed for the most part by the University of Virginia.

Generic Kalman Filter Software

NASA Technical Reports Server (NTRS)

Lisano, Michael E., II; Crues, Edwin Z.

2005-01-01

The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on the basis of the aforementioned templates. The GKF software can be used to develop many different types of unfactorized Kalman filters. A developer can choose to implement either a linearized or an extended Kalman filter algorithm, without having to modify the GKF software. Control dynamics can be taken into account or neglected in the filter-dynamics model. Filter programs developed by use of the GKF software can be made to propagate equations of motion for linear or nonlinear dynamical systems that are deterministic or stochastic. In addition, filter programs can be made to operate in user-selectable "covariance analysis" and "propagation-only" modes that are useful in design and development stages.

SOFTCOST - DEEP SPACE NETWORK SOFTWARE COST MODEL

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1994-01-01

The early-on estimation of required resources and a schedule for the development and maintenance of software is usually the least precise aspect of the software life cycle. However, it is desirable to make some sort of an orderly and rational attempt at estimation in order to plan and organize an implementation effort. The Software Cost Estimation Model program, SOFTCOST, was developed to provide a consistent automated resource and schedule model which is more formalized than the often used guesswork model based on experience, intuition, and luck. SOFTCOST was developed after the evaluation of a number of existing cost estimation programs indicated that there was a need for a cost estimation program with a wide range of application and adaptability to diverse kinds of software. SOFTCOST combines several software cost models found in the open literature into one comprehensive set of algorithms that compensate for nearly fifty implementation factors relative to size of the task, inherited baseline, organizational and system environment, and difficulty of the task. SOFTCOST produces mean and variance estimates of software size, implementation productivity, recommended staff level, probable duration, amount of computer resources required, and amount and cost of software documentation. Since the confidence level for a project using mean estimates is small, the user is given the opportunity to enter risk-biased values for effort, duration, and staffing, to achieve higher confidence levels. SOFTCOST then produces a PERT/CPM file with subtask efforts, durations, and precedences defined so as to produce the Work Breakdown Structure (WBS) and schedule having the asked-for overall effort and duration. The SOFTCOST program operates in an interactive environment prompting the user for all of the required input. The program builds the supporting PERT data base in a file for later report generation or revision. The PERT schedule and the WBS schedule may be printed and stored in a file for later use. The SOFTCOST program is written in Microsoft BASIC for interactive execution and has been implemented on an IBM PC-XT/AT operating MS-DOS 2.1 or higher with 256K bytes of memory. SOFTCOST was originally developed for the Zylog Z80 system running under CP/M in 1981. It was converted to run on the IBM PC XT/AT in 1986. SOFTCOST is a copyrighted work with all copyright vested in NASA.

The predictive information obtained by testing multiple software versions

NASA Technical Reports Server (NTRS)

Lee, Larry D.

1987-01-01

Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

Implementation of a computer database testing and analysis program.

PubMed

Rouse, Deborah P

2007-01-01

The author is the coordinator of a computer software database testing and analysis program implemented in an associate degree nursing program. Computer software database programs help support the testing development and analysis process. Critical thinking is measurable and promoted with their use. The reader of this article will learn what is involved in procuring and implementing a computer database testing and analysis program in an academic nursing program. The use of the computerized database for testing and analysis will be approached as a method to promote and evaluate the nursing student's critical thinking skills and to prepare the nursing student for the National Council Licensure Examination.

SimulCAT: Windows Software for Simulating Computerized Adaptive Test Administration

ERIC Educational Resources Information Center

Han, Kyung T.

2012-01-01

Most, if not all, computerized adaptive testing (CAT) programs use simulation techniques to develop and evaluate CAT program administration and operations, but such simulation tools are rarely available to the public. Up to now, several software tools have been available to conduct CAT simulations for research purposes; however, these existing…

Programming Languages or Generic Software Tools, for Beginners' Courses in Computer Literacy?

ERIC Educational Resources Information Center

Neuwirth, Erich

1987-01-01

Discussion of methods that can be used to teach beginner courses in computer literacy focuses on students aged 10-12. The value of using a programing language versus using a generic software package is highlighted; Logo and Prolog are reviewed; and the use of databases is discussed. (LRW)

Development and Evaluation of LEGUME ID: A ToolBook Multimedia Module.

ERIC Educational Resources Information Center

Hannaway, David B.; And Others

1992-01-01

Describes the development and advantages of LEGUME ID, a multimedia module for agricultural education. LEGUME ID is an example of how teachers, given the opportunity through accessible computer software programs, can create powerful teaching tools. Summarized is a student response to the use of this teacher-produced software program. (MCO)

Stream network and stream segment temperature models software

USGS Publications Warehouse

Bartholow, John

2010-01-01

This set of programs simulates steady-state stream temperatures throughout a dendritic stream network handling multiple time periods per year. The software requires a math co-processor and 384K RAM. Also included is a program (SSTEMP) designed to predict the steady state stream temperature within a single stream segment for a single time period.

Evaluating Federal Information Technology Program Success Based on Earned Value Management

ERIC Educational Resources Information Center

Moy, Mae N.

2016-01-01

Despite the use of earned value management (EVM) techniques to track development progress, federal information (IT) software programs continue to fail by not meeting identified business requirements. The purpose of this logistic regression study was to examine, using IT software data from federal agencies from 2011 to 2014, whether a relationship…

Incorporating Distance Learning into Counselor Education Programs: A Research Study.

ERIC Educational Resources Information Center

Wantz, Richard A.; Tromski, Donna M.; Mortsolf, Christina Joelle; Yoxtheimer, Greggory; Brill, Samantha; Cole, Alison

The purpose of this study is to determine the number of counselor education programs that utilize distance learning, to identify the distance learning software delivery products used, and to identify features of software used. The researchers also attempt to identify faculty perceptions related to and experience with the importance of distance…

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Clauses 252.227-7018 Rights in noncommercial technical data and computer software—Small Business... Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAR 2011...

Computer-Assisted Instruction in Early Literacy for African American, Economically Disadvantaged Children

ERIC Educational Resources Information Center

Shamir, Haya; Feehan, Kathryn; Yoder, Erik

2017-01-01

This study explores the efficacy of the Waterford Early Reading program (ERP) for teaching kindergarten and first grade students' early reading concepts. Students attended 3 elementary schools in Alabama. The treatment group used the software program whereas the control group did not use the software. Analyses revealed a significant treatment…

It's Time to Consider Open Source Software

ERIC Educational Resources Information Center

Pfaffman, Jay

2007-01-01

In 1985 Richard Stallman, a computer programmer, released "The GNU Manifesto" in which he proclaimed a golden rule: One must share computer programs. Software vendors required him to agree to license agreements that forbade sharing programs with others, but he refused to "break solidarity" with other computer users whom he assumed also wanted to…

Software Tools: A One-Semester Secondary School Computer Course.

ERIC Educational Resources Information Center

Bromley, John; Lakatos, John

1985-01-01

Provides a course outline, describes equipment and teacher requirements, discusses student evaluation and course outcomes, and details the computer programs used in a high school course. The course is designed to teach students use of the microcomputer as a tool through hands-on experience with a variety of commercial software programs. (MBR)

77 FR 70151 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or Quantities of.... The sensitivity is primarily in the software programs that instruct the system how to operate in the... Only Memory (ROM) maps, which do not provide the software program itself. The overall hardware is...

Technology survey of computer software as applicable to the MIUS project

NASA Technical Reports Server (NTRS)

Fulbright, B. E.

1975-01-01

Existing computer software, available from either governmental or private sources, applicable to modular integrated utility system program simulation is surveyed. Several programs and subprograms are described to provide a consolidated reference, and a bibliography is included. The report covers the two broad areas of design simulation and system simulation.

UTOOLS: microcomputer software for spatial analysis and landscape visualization.

Treesearch

Alan A. Ager; Robert J. McGaughey

1997-01-01

UTOOLS is a collection of programs designed to integrate various spatial data in a way that allows versatile spatial analysis and visualization. The programs were designed for watershed-scale assessments in which a wide array of resource data must be integrated, analyzed, and interpreted. UTOOLS software combines raster, attribute, and vector data into "spatial...