Examples of Sports-Based Youth Development Programs

ERIC Educational Resources Information Center

Berlin, Richard A.; Dworkin, Aaron; Eames, Ned; Menconi, Arn; Perkins, Daniel F.

2007-01-01

The authors provide examples of sports-based youth development programs and offer information about program mission and vision, program design and content, evaluation results, and program sustainability. The four sports-based youth development programs presented are Harlem RBI, Tenacity, Snowsports Outreach Society, and Hoops & Leaders…

Space Launch System Base Heating Test: Environments and Base Flow Physics

NASA Technical Reports Server (NTRS)

Mehta, Manish; Knox, Kyle; Seaford, Mark; Dufrene, Aaron

2016-01-01

NASA MSFC and CUBRC designed and developed a 2% scale SLS propulsive wind tunnel test program to investigate base flow effects during flight from lift-off to MECO. This type of test program has not been conducted in 40+ years during the NASA Shuttle Program. Dufrene et al paper described the operation, instrumentation type and layout, facility and propulsion performance, test matrix and conditions and some raw results. This paper will focus on the SLS base flow physics and the generation and results of the design environments being used to design the thermal protection system.

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: A government overview

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1993-01-01

NASA-Langley, under the Design Analysis Methods for Vibrations (DAMVIBS) Program, set out in 1984 to establish the technology base needed by the rotorcraft industry for developing an advanced finite-element-based dynamics design analysis capability for vibrations. Considerable work has been done by the industry participants in the program since that time. Because the DAMVIBS Program is being phased out, a government/industry assessment of the program has been made to identify those accomplishments and contributions which may be ascribed to the program. The purpose of this paper is to provide an overview of the program and its accomplishments and contributions from the perspective of the government sponsoring organization.

The birds, the bees, and the Bible: single African American mothers' perceptions of a faith-based sexuality educaton program.

PubMed

Cornelius, Judith Bacchus

2009-01-01

This exploratory study examined single mothers' ideas on the development of a faith-based sexuality program. Twenty African American single mothers with adolescent children (11 to 13 years of age) who were of the same faith and members of one church, participated in two focus groups about how a faith-based sexuality program could be designed and implemented. The findings call attention to the need for research on the design of faith-based sexuality education programs for ethnic minority families headed by single mothers.

The NASA/Industry Design Analysis Methods for Vibrations (DAMVIBS) Program - A government overview. [of rotorcraft technology development using finite element method

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1992-01-01

An overview is presented of government contributions to the program called Design Analysis Methods for Vibrations (DAMV) which attempted to develop finite-element-based analyses of rotorcraft vibrations. NASA initiated the program with a finite-element modeling program for the CH-47D tandem-rotor helicopter. The DAMV program emphasized four areas including: airframe finite-element modeling, difficult components studies, coupled rotor-airframe vibrations, and airframe structural optimization. Key accomplishments of the program include industrywide standards for modeling metal and composite airframes, improved industrial designs for vibrations, and the identification of critical structural contributors to airframe vibratory responses. The program also demonstrated the value of incorporating secondary modeling details to improving correlation, and the findings provide the basis for an improved finite-element-based dynamics design-analysis capability.

The Efficacy of a Systematic Substance Abuse Program for Adolescent Females

ERIC Educational Resources Information Center

Froeschle, Janet G.; Smith, Robert L.; Ricard, Richard

2007-01-01

A school-based substance abuse prevention program based on the assumptions of the ASCA National Model[R] was designed to change adolescent females' drug-using behaviors. The program was designed to reduce substance abuse, increase negative attitudes toward drug use, and reduce negative behaviors while increasing positive behaviors, knowledge of…

Promoting Community-Based Services: Implications for Program Design, Implementation, and Public Policy.

ERIC Educational Resources Information Center

Powers, Michael D.

1986-01-01

Program design, implementation, and public policy issues are discussed for five urban community-based programs for the developmentally disabled: (1) direct services in intermediate care facilities; (2) a High Risk Infant project; (3) group home consultative services; (4) training for support services to adoptive families; (5) a national…

Solar energy program evaluation: an introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

deLeon, P.

The Program Evaluation Methodology provides an overview of the practice and methodology of program evaluation and defines more precisely the evaluation techniques and methodologies that would be most appropriate to government organizations which are actively involved in the research, development, and commercialization of solar energy systems. Formal evaluation cannot be treated as a single methodological approach for assessing a program. There are four basic types of evaluation designs - the pre-experimental design; the quasi-experimental design based on time series; the quasi-experimental design based on comparison groups; and the true experimental design. This report is organized to first introduce the rolemore » and issues of evaluation. This is to provide a set of issues to organize the subsequent sections detailing the national solar energy programs. Then, these two themes are integrated by examining the evaluation strategies and methodologies tailored to fit the particular needs of the various individual solar energy programs. (MCW)« less

Modifications of ORNL's computer programs MSF-21 and VTE-21 for the evaluation and rapid optimization of multistage flash and vertical tube evaporators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glueckstern, P.; Wilson, J.V.; Reed, S.A.

1976-06-01

Design and cost modifications were made to ORNL's Computer Programs MSF-21 and VTE-21 originally developed for the rapid calculation and design optimization of multistage flash (MSF) and multieffect vertical tube evaporator (VTE) desalination plants. The modifications include additional design options to make possible the evaluation of desalting plants based on current technology (the original programs were based on conceptual designs applying advanced and not yet proven technological developments and design features) and new materials and equipment costs updated to mid-1975.

Comparing oncology clinical programs by use of innovative designs and expected net present value optimization: Which adaptive approach leads to the best result?

PubMed

Parke, Tom; Marchenko, Olga; Anisimov, Vladimir; Ivanova, Anastasia; Jennison, Christopher; Perevozskaya, Inna; Song, Guochen

2017-01-01

Designing an oncology clinical program is more challenging than designing a single study. The standard approaches have been proven to be not very successful during the last decade; the failure rate of Phase 2 and Phase 3 trials in oncology remains high. Improving a development strategy by applying innovative statistical methods is one of the major objectives of a drug development process. The oncology sub-team on Adaptive Program under the Drug Information Association Adaptive Design Scientific Working Group (DIA ADSWG) evaluated hypothetical oncology programs with two competing treatments and published the work in the Therapeutic Innovation and Regulatory Science journal in January 2014. Five oncology development programs based on different Phase 2 designs, including adaptive designs and a standard two parallel arm Phase 3 design were simulated and compared in terms of the probability of clinical program success and expected net present value (eNPV). In this article, we consider eight Phase2/Phase3 development programs based on selected combinations of five Phase 2 study designs and three Phase 3 study designs. We again used the probability of program success and eNPV to compare simulated programs. For the development strategies, we considered that the eNPV showed robust improvement for each successive strategy, with the highest being for a three-arm response adaptive randomization design in Phase 2 and a group sequential design with 5 analyses in Phase 3.

College of Saint Teresa: Design for Choicemakers. An Operations Manual for Faculty and Staff.

ERIC Educational Resources Information Center

Batell, Susan; And Others

The College of Saint Teresa's value-based educational program, known as "Design for Choicemakers," is described. The program is designed to foster students' holistic learning and personal development, based on cooperation among the academic affairs, student affairs, and pastoral affairs offices. The links between the curriculum and…

Interior Design and Housing. 7055. Curriculum Guide.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

This curriculum guide was developed as a resource for teachers to use in planning and implementing a competency-based instructional program on interior design and housing at the high school level. It contains materials for a 2-semester course, based on the North Carolina Vocational Education Program of Studies (revised 1992); it is designed to…

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Astrophysics Data System (ADS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-03-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-01-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

Constraint-based component-modeling for knowledge-based design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1992-01-01

The paper describes the application of various advanced programming techniques derived from artificial intelligence research to the development of flexible design tools for conceptual design. Special attention is given to two techniques which appear to be readily applicable to such design tools: the constraint propagation technique and the object-oriented programming. The implementation of these techniques in a prototype computer tool, Rubber Airplane, is described.

A Controlled Evaluation of a High School Biomedical Pipeline Program: Design and Methods

ERIC Educational Resources Information Center

Winkleby, Marilyn A.; Ned, Judith; Ahn, David; Koehler, Alana; Fagliano, Kathleen; Crump, Casey

2014-01-01

Given limited funding for school-based science education, non-school-based programs have been developed at colleges and universities to increase the number of students entering science- and health-related careers and address critical workforce needs. However, few evaluations of such programs have been conducted. We report the design and methods of…

Maximizing the Impact of Program Evaluation: A Discrepancy-Based Process for Educational Program Evaluation.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

This paper describes a formative/summative process for educational program evaluation, which is appropriate for higher education programs and is based on M. Provus' Discrepancy Evaluation Model and the principles of instructional design. The Discrepancy Based Methodology for Educational Program Evaluation facilitates systematic and detailed…

Competency-Based Assessment for Clinical Supervisors: Design-Based Research on a Web-Delivered Program

PubMed Central

Williams, Lauren Therese; Grealish, Laurie; Jamieson, Maggie

2015-01-01

Background Clinicians need to be supported by universities to use credible and defensible assessment practices during student placements. Web-based delivery of clinical education in student assessment offers professional development regardless of the geographical location of placement sites. Objective This paper explores the potential for a video-based constructivist Web-based program to support site supervisors in their assessments of student dietitians during clinical placements. Methods This project was undertaken as design-based research in two stages. Stage 1 describes the research consultation, development of the prototype, and formative feedback. In Stage 2, the program was pilot-tested and evaluated by a purposeful sample of nine clinical supervisors. Data generated as a result of user participation during the pilot test is reported. Users’ experiences with the program were also explored via interviews (six in a focus group and three individually). The interviews were transcribed verbatim and thematic analysis conducted from a pedagogical perspective using van Manen’s highlighting approach. Results This research succeeded in developing a Web-based program, “Feed our Future”, that increased supervisors’ confidence with their competency-based assessments of students on clinical placements. Three pedagogical themes emerged: constructivist design supports transformative Web-based learning; videos make abstract concepts tangible; and accessibility, usability, and pedagogy are interdependent. Conclusions Web-based programs, such as Feed our Future, offer a viable means for universities to support clinical supervisors in their assessment practices during clinical placements. A design-based research approach offers a practical process for such Web-based tool development, highlighting pedagogical barriers for planning purposes. PMID:25803172

Preliminary Design of a Consultation Knowledge-Based System for the Minimization of Distortion in Welded Structures

DTIC Science & Technology

1989-02-01

which capture the knowledge of such experts. These Expert Systems, or Knowledge-Based Systems’, differ from the usual computer programming techniques...their applications in the fields of structural design and welding is reviewed. 5.1 Introduction Expert Systems, or KBES, are computer programs using Al...procedurally constructed as conventional computer programs usually are; * The knowledge base of such systems is executable, unlike databases 3 "Ill

Multiparadigm Design Environments

DTIC Science & Technology

1992-01-01

following results: 1. New methods for programming in terms of conceptual models 2. Design of object-oriented languages 3. Compiler optimization and...experimented with object-based methods for programming directly in terms of conceptual models, object-oriented language design, computer program...expect the3e results to have a strong influence on future ,,j :- ...... L ! . . • a mm ammmml ll Illlll • l I 1 Conceptual Programming Conceptual

Moving towards Quality Programs. Defining Criteria for Quality Program Designs Based on Lessons from Research and Experience.

ERIC Educational Resources Information Center

Curnan, Susan P.; Melchior, Alan

Research conducted during the Youth Research and Technical Assistance project established that the process of designing effective job training/employment programs for at-risk youth can be framed in terms of the following broad themes: focusing on youth as youth by developing program designs that are appropriate for their age and level of…

A Randomized Crossover Study of Web-Based Media Literacy to Prevent Smoking

ERIC Educational Resources Information Center

Shensa, Ariel; Phelps-Tschang, Jane; Miller, Elizabeth; Primack, Brian A.

2016-01-01

Feasibly implemented Web-based smoking media literacy (SML) programs have been associated with improving SML skills among adolescents. However, prior evaluations have generally had weak experimental designs. We aimed to examine program efficacy using a more rigorous crossover design. Seventy-two ninth grade students completed a Web-based SML…

The Feasibility of Using Nature-Based Settings for Physical Activity Programming: Views from Urban Youth and Program Providers

ERIC Educational Resources Information Center

Blanton, Jedediah E.; Oregon, Evelyn M.; Flett, M. Ryan; Gould, Daniel R.; Pfeiffer, Karin A.

2013-01-01

Background and Purpose: Given the urgency to design programs to increase physical activity, especially to combat obesity in children, the primary purpose of this study was to investigate perceptions and opinions of a nature-based physical activity intervention designed for low-income urban adolescents. Methods: Four focus groups of adolescents,…

The Design and Pilot Evaluation of an Interactive Learning Environment for Introductory Programming Influenced by Cognitive Load Theory and Constructivism

ERIC Educational Resources Information Center

Moons, Jan; De Backer, Carlos

2013-01-01

This article presents the architecture and evaluation of a novel environment for programming education. The design of this programming environment, and the way it is used in class, is based on the findings of constructivist and cognitivist learning paradigms. The environment is evaluated based on qualitative student and teacher evaluations and…

Developing an Internet-based Survey to Collect Program Cost Data

ERIC Educational Resources Information Center

Caffray, Christine M.; Chatterji, Pinka

2009-01-01

This manuscript describes the development and testing of an Internet-based cost survey that was designed by the authors for the National Assembly on School-Based Health Care (NASBHC) to capture the costs of school-based health programs. The intent of the survey was twofold. First, the survey was designed to collect comprehensive data on costs in a…

Design of a Program for Expert Diagnosis of Acid Base and Electrolyte Disturbances,

DTIC Science & Technology

1979-05-01

PIP) is a frame based [23) program for taking the present illnrvc irs the doina in of renal diseases. The PIP data base is implemented using disease...I- AD—A 078 ‘+13 MASSACHUSETTS INST OF TECH CAMBRIDGE LAB FOR COMPUTE—ETC F/B 6/5 DESIGN OF A PROGRA M FOR EXPERT DIAGNOSIS OF ACID BASE AND ELECT...132 / D ~~ C DEC -‘ç 1979 DESIGN OF A PROGRAN FOR EXPERT DIAGNOSIS OF ACID BASE MID ELECTROLYTE DISTURBANCES ~979 Ratuesh S. Path LIBRA Rya- 4

Beyond Borders: Participatory Design Research and the Changing Role of Design

ERIC Educational Resources Information Center

Blair-Early, Adream

2010-01-01

University art and design programs are branching out and creating cross-disciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to…

Preparing Turnaround Leaders for High Needs Urban Schools

ERIC Educational Resources Information Center

Lochmiller, Chad R.; Chesnut, Colleen E.

2017-01-01

Purpose: The purpose of this paper is to describe the program structure and design considerations of a 25-day, full-time apprenticeship in a university-based principal preparation program. Design/Methodology/ Approach: The study used a qualitative case study design that drew upon interviews and focus groups with program participants as well as…

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development and Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan; Kirchner, Robert; Engel, Carl D.

2014-01-01

The Space Launch System (SLS) base heating test is broken down into two test programs: (1) Pathfinder and (2) Main Test. The Pathfinder Test Program focuses on the design, development, hot-fire test and performance analyses of the 2% sub-scale SLS core-stage and booster element propulsion systems. The core-stage propulsion system is composed of four gaseous oxygen/hydrogen RS-25D model engines and the booster element is composed of two aluminum-based model solid rocket motors (SRMs). The first section of the paper discusses the motivation and test facility specifications for the test program. The second section briefly investigates the internal flow path of the design. The third section briefly shows the performance of the model RS-25D engines and SRMs for the conducted short duration hot-fire tests. Good agreement is observed based on design prediction analysis and test data. This program is a challenging research and development effort that has not been attempted in 40+ years for a NASA vehicle.

Nonlinear program based optimization of boost and buck-boost converter designs

NASA Astrophysics Data System (ADS)

Rahman, S.; Lee, F. C.

The facility of an Augmented Lagrangian (ALAG) multiplier based nonlinear programming technique is demonstrated for minimum-weight design optimizations of boost and buck-boost power converters. Certain important features of ALAG are presented in the framework of a comprehensive design example for buck-boost power converter design optimization. The study provides refreshing design insight of power converters and presents such information as weight and loss profiles of various semiconductor components and magnetics as a function of the switching frequency.

Video Games: A Human Factors Guide to Visual Display Design and Instructional System Design

DTIC Science & Technology

1984-04-01

Electronic video games have many of the same technological and psychological characteristics that are found in military computer-based systems. For...both of which employ video games as experimental stimuli, are presented here. The first research program seeks to identify and exploit the...characteristics of video games in the design of game-based training devices. The second program is designed to explore the effects of electronic video display

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development & Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan

2014-01-01

ATA-002 Technical Team has successfully designed, developed, tested and assessed the SLS Pathfinder propulsion systems for the Main Base Heating Test Program. Major Outcomes of the Pathfinder Test Program: Reach 90% of full-scale chamber pressure Achieved all engine/motor design parameter requirements Reach steady plume flow behavior in less than 35 msec Steady chamber pressure for 60 to 100 msec during engine/motor operation Similar model engine/motor performance to full-scale SLS system Mitigated nozzle throat and combustor thermal erosion Test data shows good agreement with numerical prediction codes Next phase of the ATA-002 Test Program Design & development of the SLS OML for the Main Base Heating Test Tweak BSRM design to optimize performance Tweak CS-REM design to increase robustness MSFC Aerosciences and CUBRC have the capability to develop sub-scale propulsion systems to meet desired performance requirements for short-duration testing.

The Development of Online Tutorial Program Design Using Problem-Based Learning in Open Distance Learning System

ERIC Educational Resources Information Center

Said, Asnah; Syarif, Edy

2016-01-01

This research aimed to evaluate of online tutorial program design by applying problem-based learning Research Methods currently implemented in the system of Open Distance Learning (ODL). The students must take a Research Methods course to prepare themselves for academic writing projects. Problem-based learning basically emphasizes the process of…

Contraceptive Health Programs for Adolescents: A Critical Review.

ERIC Educational Resources Information Center

Lagana, Luciana; Hayes, David M.

1993-01-01

Reviews some contraceptive education programs designed for adolescents that differ in educational process based on delivery setting. Reviews school-based, community-based, and college/university-based programs and discusses them in terms of their effectiveness, potential, and limitations. Notes that educational accountability in each setting…

Development and process evaluation of a Web-based responsible beverage service training program.

PubMed

Danaher, Brian G; Dresser, Jack; Shaw, Tracy; Severson, Herbert H; Tyler, Milagra S; Maxwell, Elisabeth D; Christiansen, Steve M

2012-09-22

Responsible beverage service (RBS) training designed to improve the appropriate service of alcohol in commercial establishments is typically delivered in workshops. Recently, Web-based RBS training programs have emerged. This report describes the formative development and subsequent design of an innovative Web-delivered RBS program, and evaluation of the impact of the program on servers' knowledge, attitudes, and self-efficacy. Formative procedures using focus groups and usability testing were used to develop a Web-based RBS training program. Professional alcohol servers (N = 112) who worked as servers and/or mangers in alcohol service settings were recruited to participate. A pre-post assessment design was used to assess changes associated with using the program. Participants who used the program showed significant improvements in their RBS knowledge, attitudes, and self-efficacy. Although the current study did not directly observe and determine impact of the intervention on server behaviors, it demonstrated that the development process incorporating input from a multidisciplinary team in conjunction with feedback from end-users resulted in creation of a Web-based RBS program that was well-received by servers and that changed relevant knowledge, attitudes, and self-efficacy. The results also help to establish a needed evidence base in support of the use of online RBS training, which has been afforded little research attention.

Defense Acquisitions: Assessments of Selected Weapon Programs

DTIC Science & Technology

2012-03-01

knowledge-based practices. As a result , most of these programs will carry technology, design, and production risks into subsequent phases of the...acquisition process that could result in cost growth or schedule delays. GAO also assessed the implementation of selected acquisition reforms and found...knowledge-based practices. As a result , most of these programs will carry technology, design, and production risks into subsequent phases of the

Design and Implementation of an Interface Editor for the Amadeus Multi- Relational Database Front-end System

DTIC Science & Technology

1993-03-25

application of Object-Oriented Programming (OOP) and Human-Computer Interface (HCI) design principles. Knowledge gained from each topic has been incorporated...through the ap- plication of Object-Oriented Programming (OOP) and Human-Computer Interface (HCI) design principles. Knowledge gained from each topic has...programming and Human-Computer Interface (HCI) design. Knowledge gained from each is applied to the design of a Form-based interface for database data

Understanding Acid-Base Concepts: Evaluating the Efficacy of a Senior High School Student-Centred Instructional Program in Indonesia

ERIC Educational Resources Information Center

Rahayu, Sri; Chandrasegaran, A. L.; Treagust, David F.; Kita, Masakazu; Ibnu, Suhadi

2011-01-01

This study was a mixed quantitative-qualitative research to evaluate the efficacy of a designed student-centred instructional (DSCI) program for teaching about acids and bases. The teaching innovation was designed based on constructivist, hands-on inquiry and context-based approaches and implemented in seven 45-min lessons with a class of 36 grade…

Oasis Connections: Results from an Evaluation Study

ERIC Educational Resources Information Center

Czaja, Sara J.; Lee, Chin Chin; Branham, Janice; Remis, Peggy

2012-01-01

Purpose of the Study: The objectives of this study were to evaluate a community-based basic computer and Internet training program designed for older adults, provide recommendations for program refinement, and gather preliminary information on program sustainability. Design and Methods: The program was developed by the OASIS Institute, a nonprofit…

Design and Development of the Aircraft Instrument Comprehension Program.

ERIC Educational Resources Information Center

Higgins, Norman C.

The Aircraft Instrument Comprehension (AIC) Program is a self-instructional program designed to teach undergraduate student pilots to read instruments that indicate the position of the aircraft in flight, based on sequential instructional stages of information, prompted practice, and unprompted practice. The program includes a 36-item multiple…

ATLAS, an integrated structural analysis and design system. Volume 2: System design document

NASA Technical Reports Server (NTRS)

Erickson, W. J. (Editor)

1979-01-01

ATLAS is a structural analysis and design system, operational on the Control Data Corporation 6600/CYBER computers. The overall system design, the design of the individual program modules, and the routines in the ATLAS system library are described. The overall design is discussed in terms of system architecture, executive function, data base structure, user program interfaces and operational procedures. The program module sections include detailed code description, common block usage and random access file usage. The description of the ATLAS program library includes all information needed to use these general purpose routines.

Venture Creation Programs: Bridging Entrepreneurship Education and Technology Transfer

ERIC Educational Resources Information Center

Lackéus, Martin; Williams Middleton, Karen

2015-01-01

Purpose: The purpose of this paper is to explore how university-based entrepreneurship programs, incorporating real-life venture creation into educational design and delivery, can bridge the gap between entrepreneurship education and technology transfer within the university environment. Design/methodology/approach: Based on a literature review…

Computer-Based Instruction in Dietetics Education.

ERIC Educational Resources Information Center

Schroeder, Lois; Kent, Phyllis

1982-01-01

Details the development and system design of a computer-based instruction (CBI) program designed to provide tutorial training in diet modification as part of renal therapy and provides the results of a study that compared the effectiveness of the CBI program with the traditional lecture/laboratory method. (EAO)

An investigation of constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to result in a database of engineering information which is easier both to maintain and to extend.

Design of study without drugs--a Surinamese school-based drug-prevention program for adolescents.

PubMed

Ishaak, Fariel; de Vries, Nanne Karel; van der Wolf, Kees

2015-10-12

The aim of this study was to design the content and accompanying materials for a school-based program--Study without Drugs--for adolescents in junior secondary schools in Suriname based on the starting points and tasks of the fourth step of the Intervention Mapping protocol (which consists of six steps). A program based on this protocol should include a combination of theory, empirical evidence, and qualitative and quantitative research. Two surveys were conducted when designing the program. In Survey I, teachers and students were asked to complete a questionnaire to determine which school year they thought would be most appropriate for implementing a drug-prevention program for adolescents (we completed a similar survey as part of previous research). An attempt was made to identify suitable culturally sensitive elements to include in the program. In Survey II, the same teachers were asked to complete a questionnaire to determine the programs' scope, sequence, structure, and topics as well as the general didactic principles to serve as a basis for program design. After outlining the program plan, lessons, and materials, we conducted a formative pretest evaluation among teachers, students, and parents. That evaluation included measures related to the program's attractiveness, comprehensibility, and usefulness. The resulting lessons were presented to the teachers for assessment. The drug-prevention program we developed comprises 10 activities and lasts 2-2.5 months in an actual school setting. The activities take place during Dutch, biology, physical education, art, religion, and social studies lessons. We based the structure of the lessons in the program on McGuire's Persuasion Communication Model, which takes into account important didactic principles. Evaluations of the program materials and lesson plans by students, teachers, and parents were mostly positive. We believe that using the fourth step of the Intervention Mapping protocol to develop a drug-prevention intervention for adolescents has a produced promising, feasible program.

Reshaping the Boundaries of Community Engagement in Design Education: Global and Local Explorations

ERIC Educational Resources Information Center

Hicks, Travis L.; Radtke, Rebekah Ison

2015-01-01

Community-driven design is a current movement in the forefront of many designers' practices and on university campuses in design programs. The authors examine work from their respective public state universities' design programs as examples of best practices. In these case studies, the authors share experiences using community-based design…

Design, fabrication, test, qualification and price analysis of third generation design solar cell modules. Part 1: Intermediate load module

NASA Technical Reports Server (NTRS)

Bottenberg, W. R.

1981-01-01

The updated program plan and narrative reflects the design and development work done and progress made in establishing a viable design for these modules. Design alterations from the preproduction plan are discussed based on experience gained during the preproduction phase of the program.

Effects of a School-Based Sexuality Education Program on Peer Educators: The Teen PEP Model

ERIC Educational Resources Information Center

Jennings, J. M.; Howard, S.; Perotte, C. L.

2014-01-01

This study evaluated the impact of the Teen Prevention Education Program (Teen PEP), a peer-led sexuality education program designed to prevent unintended pregnancy and sexually transmitted infections (STIs) including HIV among high school students. The study design was a quasi-experimental, nonrandomized design conducted from May 2007 to May…

Preliminary Quality Control System Design for the Pell Grant Program.

ERIC Educational Resources Information Center

Advanced Technology, Inc., Reston, VA.

A preliminary design for a quality control (QC) system for the Pell Grant Program is proposed, based on the needs of the Office of Student Financial Assistance (OSFA). The applicability of the general design for other student aid programs administered by OSFA is also considered. The following steps included in a strategic approach to QC system…

COMMUNITY-BASED WATERSHED MANAGEMENT: CREATING A TOOL FOR PROGRAM EVALUATION AND DESIGN

EPA Science Inventory

The criteria will be assembled into a manual to be used by community organizers, academics, managers, or policy makers in evaluating community-based watershed management initiatives and in designing new watershed management programs. The case study will also be added to the b...

Multilevel Design of School Effectiveness Studies in Sub-Saharan Africa

ERIC Educational Resources Information Center

Kelcey, Ben; Shen, Zuchao

2016-01-01

School-based improvement programs represent a core strategy in improving education because they can leverage pre-existing social and organizational structures to promote coordinated and comprehensive change across multiple facets of schooling. School-based programs are generally designed to be implemented by intact schools/districts, frequently…

The Effect of Teaching Methods and Learning Style on Learning Program Design in Web-Based Education Systems

ERIC Educational Resources Information Center

Hung, Yen-Chu

2012-01-01

The instructional value of web-based education systems has been an important area of research in information systems education. This study investigates the effect of various teaching methods on program design learning for students with specific learning styles in web-based education systems. The study takes first-year Computer Science and…

Sustainability in the Education of Industrial Designers: The Case for Australia

ERIC Educational Resources Information Center

Ramirez, Mariano

2006-01-01

Purpose: The paper intends to determine the extent to which environmental sustainability issues are integrated in the curricula of industrial design programs in Australian universities. Design/methodology/approach: Industrial design lecturers and program heads were invited to participate in a web-based survey on their university's industrial…

Implementing a Community-Based Falls-Prevention Program: From Drawing Board to Reality

ERIC Educational Resources Information Center

Filiatrault, Johanne; Parisien, Manon; Laforest, Sophie; Genest, Carole; Gauvin, Lise; Fournier, Michel; Trickey, Francine; Robitaille, Yvonne

2007-01-01

Several studies have demonstrated the efficacy of falls-prevention programs designed for community-dwelling seniors using randomized designs. However, little is known about the feasibility of implementing these programs under natural conditions and about the success of these programs when delivered under such conditions. The objectives of this…

General specifications for the development of a PC-based simulator of the NASA RECON system

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Triantafyllopoulos, Spiros

1984-01-01

The general specifications for the design and implementation of an IBM PC/XT-based simulator of the NASA RECON system, including record designs, file structure designs, command language analysis, program design issues, error recovery considerations, and usage monitoring facilities are discussed. Once implemented, such a simulator will be utilized to evaluate the effectiveness of simulated information system access in addition to actual system usage as part of the total educational programs being developed within the NASA contract.

A Drawing and Multi-Representational Computer Environment for Beginners' Learning of Programming Using C: Design and Pilot Formative Evaluation

ERIC Educational Resources Information Center

Kordaki, Maria

2010-01-01

This paper presents both the design and the pilot formative evaluation study of a computer-based problem-solving environment (named LECGO: Learning Environment for programming using C using Geometrical Objects) for the learning of computer programming using C by beginners. In its design, constructivist and social learning theories were taken into…

Development and process evaluation of a web-based responsible beverage service training program

PubMed Central

2012-01-01

Background Responsible beverage service (RBS) training designed to improve the appropriate service of alcohol in commercial establishments is typically delivered in workshops. Recently, Web-based RBS training programs have emerged. This report describes the formative development and subsequent design of an innovative Web-delivered RBS program, and evaluation of the impact of the program on servers’ knowledge, attitudes, and self-efficacy. Methods Formative procedures using focus groups and usability testing were used to develop a Web-based RBS training program. Professional alcohol servers (N = 112) who worked as servers and/or mangers in alcohol service settings were recruited to participate. A pre-post assessment design was used to assess changes associated with using the program. Results Participants who used the program showed significant improvements in their RBS knowledge, attitudes, and self-efficacy. Conclusions Although the current study did not directly observe and determine impact of the intervention on server behaviors, it demonstrated that the development process incorporating input from a multidisciplinary team in conjunction with feedback from end-users resulted in creation of a Web-based RBS program that was well-received by servers and that changed relevant knowledge, attitudes, and self-efficacy. The results also help to establish a needed evidence base in support of the use of online RBS training, which has been afforded little research attention. PMID:22999419

Constellation Program Design Challenges as Opportunities for Educational Outreach and Workforce Development for Senior Design Classes

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2009-01-01

The Texas Space Grant Consortium (TSGC) and the Exploration Systems Mission Directorate (ESMD) both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and researchers as real design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, results and metrics are presented on the NASA Design Challenge Program.

Overview of Faculty Development Programs for Interprofessional Education.

PubMed

Ratka, Anna; Zorek, Joseph A; Meyer, Susan M

2017-06-01

Objectives. To describe characteristics of faculty development programs designed to facilitate interprofessional education, and to compile recommendations for development, delivery, and assessment of such faculty development programs. Methods. MEDLINE, CINAHL, ERIC, and Web of Science databases were searched using three keywords: faculty development, interprofessional education, and health professions. Articles meeting inclusion criteria were analyzed for emergent themes, including program design, delivery, participants, resources, and assessment. Results. Seventeen articles were identified for inclusion, yielding five characteristics of a successful program: institutional support; objectives and outcomes based on interprofessional competencies; focus on consensus-building and group facilitation skills; flexibility based on institution- and participant-specific characteristics; and incorporation of an assessment strategy. Conclusion. The themes and characteristics identified in this literature overview may support development of faculty development programs for interprofessional education. An advanced evidence base for interprofessional education faculty development programs is needed.

Comprehensive Computer-Based Instructional Programs: What Works for Educationally Disadvantaged Students?

ERIC Educational Resources Information Center

Swan, Karen; And Others

The Computer Pilot Program of the Division of Computer Information Services of the New York City Board of Education was designed to investigate the claim that comprehensive computer-based instruction (CBI) might best be used to improve the basic skills of educationally disadvantaged students. This ongoing project is designed to identify…

Towards a Theory-Based Design Framework for an Effective E-Learning Computer Programming Course

ERIC Educational Resources Information Center

McGowan, Ian S.

2016-01-01

Built on Dabbagh (2005), this paper presents a four component theory-based design framework for an e-learning session in introductory computer programming. The framework, driven by a body of exemplars component, emphasizes the transformative interaction between the knowledge building community (KBC) pedagogical model, a mixed instructional…

Hypermedia without Programming: Automatic Generation of Presentation Documents for Case-based Instruction.

ERIC Educational Resources Information Center

Grissom, Scott; Koschmann, Tim

The objective of this project was to develop a way of producing instructional materials such that once an acceptable design had been achieved, hypermedia documents could be easily generated with no additional programming or design effort. The project was undertaken to support a case-based instructional curriculum in medical education. Southern…

78 FR 5458 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding..., well-designed Hospice Survey will allow us to understand: (1) Patient experiences throughout their... accordance with CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those...

MethPrimer: designing primers for methylation PCRs.

PubMed

Li, Long-Cheng; Dahiya, Rajvir

2002-11-01

DNA methylation is an epigenetic mechanism of gene regulation. Bisulfite- conversion-based PCR methods, such as bisulfite sequencing PCR (BSP) and methylation specific PCR (MSP), remain the most commonly used techniques for methylation mapping. Existing primer design programs developed for standard PCR cannot handle primer design for bisulfite-conversion-based PCRs due to changes in DNA sequence context caused by bisulfite treatment and many special constraints both on the primers and the region to be amplified for such experiments. Therefore, the present study was designed to develop a program for such applications. MethPrimer, based on Primer 3, is a program for designing PCR primers for methylation mapping. It first takes a DNA sequence as its input and searches the sequence for potential CpG islands. Primers are then picked around the predicted CpG islands or around regions specified by users. MethPrimer can design primers for BSP and MSP. Results of primer selection are delivered through a web browser in text and in graphic view.

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1999-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-2110 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition, several modeling issues for the design of shells of revolution were studied.

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1998-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-1808 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition several modeling issues for the design of shells of revolution were studied.

An Evaluation of On-Line, Interactive Tutorials Designed to Teach Practice Concepts

ERIC Educational Resources Information Center

Seabury, Brett A.

2005-01-01

This paper presents an evaluation of two on-line-based programs designed to teach practice skills. One program teaches crisis intervention and the other teaches suicide assessment. The evaluation of the use of these programs compares outcomes for two groups of students, one using the interactive program outside a class context and the other using…

Adult Literacy: Industry-Based Training Programs. Research and Development Series No. 265C.

ERIC Educational Resources Information Center

Fields, Ernest L.; And Others

Nine industry-based adult literacy programs across the country were studied to identify exemplary training programs and practices that business and industry trainers, planners, and policymakers and individuals in the public education sector alike could replicate in designing adult literacy programs. Training programs offered by the following…

Mastery Learning in Physical Education.

ERIC Educational Resources Information Center

Annarino, Anthony

This paper discusses the design of a physical education curriculum to be used in advanced secondary physical education programs and in university basic instructional programs; the design is based on the premise of mastery learning and employs programed instructional techniques. The effective implementation of a mastery learning model necessitates…

Including Multiple Voices in Collaboratively Designing a Teacher Education Program

ERIC Educational Resources Information Center

Konecki, Loretta R.; Sturdivant, Robika L.; King, Caryn M.; Melin, Jacquelyn A.; Lancaster, Paula E.

2012-01-01

This narrative case study describes the collaborative processes employed by a midwestern university as it designed and implemented a clinically based, postbaccalaureate teacher preparation program for science, technology, engineering, and mathematics (STEM) graduates committed to teaching in high need secondary schools. The program development…

Advanced Technology Inlet Design, NRA 8-21 Cycle II: DRACO Flowpath Hypersonic Inlet Design

NASA Technical Reports Server (NTRS)

Sanders, Bobby W.; Weir, Lois J.

1999-01-01

The report outlines work performed in support of the flowpath development for the DRACO engine program. The design process initiated to develop a hypersonic axisymmetric inlet for a Mach 6 rocket-based combined cycle (RBCC) engine is discussed. Various design parametrics were investigated, including design shock-on-lip Mach number, cone angle, throat Mach number, throat angle. length of distributed compression, and subsonic diffuser contours. Conceptual mechanical designs consistent with installation into the D-21 vehicle were developed. Additionally, program planning for an intensive inlet development program to support a Critical Design Review in three years was performed. This development program included both analytical and experimental elements and support for a flight-capable inlet mechanical design.

Does Implementation Follow Design? A Case Study of a Workplace Health Promotion Program Using the 4-S Program Design and the PIPE Impact Metric Evaluation Models.

PubMed

Äikäs, Antti Hermanni; Pronk, Nicolaas P; Hirvensalo, Mirja Hannele; Absetz, Pilvikki

2017-08-01

The aim of this study was to describe the content of a multiyear market-based workplace health promotion (WHP) program and to evaluate design and implementation processes in a real-world setting. Data was collected from the databases of the employer and the service provider. It was classified using the 4-S (Size, Scope, Scalability, and Sustainability) and PIPE Impact Metric (Penetration, Implementation) models. Data analysis utilized both qualitative and quantitative methods. Program design covered well the evidence-informed best practices except for clear path toward sustainability, cooperation with occupational health care, and support from middle-management supervisors. The penetration rate among participants was high (99%) and majority (81%) of services were implemented as designed. Study findings indicate that WHP market would benefit the use of evidence-based design principles and tendentious decisions to anticipate a long-term implementation process already during the planning phase.

Does Implementation Follow Design? A Case Study of a Workplace Health Promotion Program Using the 4-S Program Design and the PIPE Impact Metric Evaluation Models

PubMed Central

Äikäs, Antti Hermanni; Pronk, Nicolaas P.; Hirvensalo, Mirja Hannele; Absetz, Pilvikki

2017-01-01

Objective: The aim of this study was to describe the content of a multiyear market-based workplace health promotion (WHP) program and to evaluate design and implementation processes in a real-world setting. Methods: Data was collected from the databases of the employer and the service provider. It was classified using the 4-S (Size, Scope, Scalability, and Sustainability) and PIPE Impact Metric (Penetration, Implementation) models. Data analysis utilized both qualitative and quantitative methods. Results: Program design covered well the evidence-informed best practices except for clear path toward sustainability, cooperation with occupational health care, and support from middle-management supervisors. The penetration rate among participants was high (99%) and majority (81%) of services were implemented as designed. Conclusion: Study findings indicate that WHP market would benefit the use of evidence-based design principles and tendentious decisions to anticipate a long-term implementation process already during the planning phase. PMID:28665839

The Implementation of Blended Learning Using Android-Based Tutorial Video in Computer Programming Course II

NASA Astrophysics Data System (ADS)

Huda, C.; Hudha, M. N.; Ain, N.; Nandiyanto, A. B. D.; Abdullah, A. G.; Widiaty, I.

2018-01-01

Computer programming course is theoretical. Sufficient practice is necessary to facilitate conceptual understanding and encouraging creativity in designing computer programs/animation. The development of tutorial video in an Android-based blended learning is needed for students’ guide. Using Android-based instructional material, students can independently learn anywhere and anytime. The tutorial video can facilitate students’ understanding about concepts, materials, and procedures of programming/animation making in detail. This study employed a Research and Development method adapting Thiagarajan’s 4D model. The developed Android-based instructional material and tutorial video were validated by experts in instructional media and experts in physics education. The expert validation results showed that the Android-based material was comprehensive and very feasible. The tutorial video was deemed feasible as it received average score of 92.9%. It was also revealed that students’ conceptual understanding, skills, and creativity in designing computer program/animation improved significantly.

A tool to convert CAD models for importation into Geant4

NASA Astrophysics Data System (ADS)

Vuosalo, C.; Carlsmith, D.; Dasu, S.; Palladino, K.; LUX-ZEPLIN Collaboration

2017-10-01

The engineering design of a particle detector is usually performed in a Computer Aided Design (CAD) program, and simulation of the detector’s performance can be done with a Geant4-based program. However, transferring the detector design from the CAD program to Geant4 can be laborious and error-prone. SW2GDML is a tool that reads a design in the popular SOLIDWORKS CAD program and outputs Geometry Description Markup Language (GDML), used by Geant4 for importing and exporting detector geometries. Other methods for outputting CAD designs are available, such as the STEP format, and tools exist to convert these formats into GDML. However, these conversion methods produce very large and unwieldy designs composed of tessellated solids that can reduce Geant4 performance. In contrast, SW2GDML produces compact, human-readable GDML that employs standard geometric shapes rather than tessellated solids. This paper will describe the development and current capabilities of SW2GDML and plans for its enhancement. The aim of this tool is to automate importation of detector engineering models into Geant4-based simulation programs to support rapid, iterative cycles of detector design, simulation, and optimization.

The NASA/industry design analysis methods for vibrations (DAMVIBS) program - Accomplishments and contributions

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1991-01-01

A NASA Langley-sponsored rotorcraft structural dynamics program, known as Design Analysis Methods for VIBrationS (DAMVIBS), has been under development since 1984. The objective of this program was to establish the technology base needed by the industry to develop an advanced finite-element-based dynamics design analysis capability for vibrations. Under the program, teams from the four major helicopter manufacturers have formed finite-element models, conducted ground vibration tests, made test/analysis comparisons of both metal and composite airframes, performed 'difficult components' studies on airframes to identify components which need more complete finite-element representation for improved correlation, and evaluated industry codes for computing coupled rotor-airframe vibrations. Studies aimed at establishing the role that structural optimization can play in airframe vibrations design work have also been initiated. Five government/industry meetings were held in connection with these activities during the course of the program. Because the DAMVIBS Program is coming to an end, the fifth meeting included a brief assessment of the program and its benefits to the industry.

The NASA/industry design analysis methods for vibrations (DAMVIBS) program: Accomplishments and contributions

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1991-01-01

A NASA Langley-sponsored rotorcraft structural dynamics program, known as Design Analysis Methods for VIBrationS (DAMVIBS), has been under development since 1984. The objective of this program was to establish the technology base needed by the industry to develop an advanced finite-element-based dynamics design analysis capability for vibrations. Under the program, teams from the four major helicopter manufacturers have formed finite-element models, conducted ground vibration tests, made test/analysis comparisons of both metal and composite airframes, performed 'difficult components' studies on airframes to identify components which need more complete finite-element representation for improved correlation, and evaluated industry codes for computing coupled rotor-airframe vibrations. Studies aimed at establishing the role that structural optimization can play in airframe vibrations design work have also been initiated. Five government/industry meetings were held in connection with these activities during the course of the program. Because the DAMVIBS Program is coming to an end, the fifth meeting included a brief assessment of the program and its benefits to the industry.

Reducing alcohol consumption among university students: recruitment and program design strategies based on Social Marketing Theory.

PubMed

Black, D R; Smith, M A

1994-09-01

Recruitment of program participants and development of appealing comprehensive alcohol abuse prevention programs is an exigent priority for university campuses due to the serious physical and emotional consequences related to alcohol consumption. A sample of 67 students from a large midwestern university completed a survey based on Social Marketing Theory (SMT) which was developed to improve recruitment and enhance the design of comprehensive alcohol abuse prevention programs. The results indicate that recruitment may be optimized by providing a flexible, convenient, low-cost program that encourages friends' participation, communicates alcohol-related risks and offers university credit or refund as participation incentives. The design of alcohol abuse prevention programs may be enhanced by emphasizing the positive outcomes of reducing alcohol consumption, improving the quality and quantity of alternatives to the social atmosphere connected with drinking, and soliciting respected opinion leaders (physicians and parents) to communicate alcohol reduction messages. This project is a first initiative to 'fill the gap' in the social marketing research literature by providing formative information pertinent to recruitment and design of alcohol reduction programs specifically for college students.

Optical Design Using Small Dedicated Computers

NASA Astrophysics Data System (ADS)

Sinclair, Douglas C.

1980-09-01

Since the time of the 1975 International Lens Design Conference, we have developed a series of optical design programs for Hewlett-Packard desktop computers. The latest programs in the series, OSLO-25G and OSLO-45G, have most of the capabilities of general-purpose optical design programs, including optimization based on exact ray-trace data. The computational techniques used in the programs are similar to ones used in other programs, but the creative environment experienced by a designer working directly with these small dedicated systems is typically much different from that obtained with shared-computer systems. Some of the differences are due to the psychological factors associated with using a system having zero running cost, while others are due to the design of the program, which emphasizes graphical output and ease of use, as opposed to computational speed.

TEAM-HF Cost-Effectiveness Model: A Web-Based Program Designed to Evaluate the Cost-Effectiveness of Disease Management Programs in Heart Failure

PubMed Central

Reed, Shelby D.; Neilson, Matthew P.; Gardner, Matthew; Li, Yanhong; Briggs, Andrew H.; Polsky, Daniel E.; Graham, Felicia L.; Bowers, Margaret T.; Paul, Sara C.; Granger, Bradi B.; Schulman, Kevin A.; Whellan, David J.; Riegel, Barbara; Levy, Wayne C.

2015-01-01

Background Heart failure disease management programs can influence medical resource use and quality-adjusted survival. Because projecting long-term costs and survival is challenging, a consistent and valid approach to extrapolating short-term outcomes would be valuable. Methods We developed the Tools for Economic Analysis of Patient Management Interventions in Heart Failure (TEAM-HF) Cost-Effectiveness Model, a Web-based simulation tool designed to integrate data on demographic, clinical, and laboratory characteristics, use of evidence-based medications, and costs to generate predicted outcomes. Survival projections are based on a modified Seattle Heart Failure Model (SHFM). Projections of resource use and quality of life are modeled using relationships with time-varying SHFM scores. The model can be used to evaluate parallel-group and single-cohort designs and hypothetical programs. Simulations consist of 10,000 pairs of virtual cohorts used to generate estimates of resource use, costs, survival, and incremental cost-effectiveness ratios from user inputs. Results The model demonstrated acceptable internal and external validity in replicating resource use, costs, and survival estimates from 3 clinical trials. Simulations to evaluate the cost-effectiveness of heart failure disease management programs across 3 scenarios demonstrate how the model can be used to design a program in which short-term improvements in functioning and use of evidence-based treatments are sufficient to demonstrate good long-term value to the health care system. Conclusion The TEAM-HF Cost-Effectiveness Model provides researchers and providers with a tool for conducting long-term cost-effectiveness analyses of disease management programs in heart failure. PMID:26542504

The design of a microprocessor-based data logger

USGS Publications Warehouse

Leap, K.J.; Dedini, L.A.

1982-01-01

The design of a microprocessor-based data logger, which collects and digitizes analog voltage signals from a continuous-measuring instrumentation system and transmits serial data to a magnetic tape recorder, is discussed. The data logger was assembled from commercially-available components and can be user-programmed for greater flexibility. A description of the data logger hardware and software designs, general operating instructions, the microprocessor program listing, and electrical schematic diagrams are presented.

Constellation Program Design Challenges as Opportunities for Educational Outreach- Lessons Learned

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2010-01-01

The Texas Space Grant Consortium (TSGC) and the NASA Exploration Systems Mission Directorate (ESMD) Education Office both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and scientists as actual design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, lessons learned are presented on the NASA Design Challenge Program.

Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

ERIC Educational Resources Information Center

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

Standards Based Reform. Abbott Implementation Resource Guide

ERIC Educational Resources Information Center

Passantino, Claire; Kenyon, Susan

2004-01-01

The goal of this guide is to provide information, support and practical tools that may help educators design, implement, and evaluate their school's standards-based education program. In order to work, a comprehensive, standards-based educational program must, by definition, be the organizing structure upon which the school program operates.…

Teaming up for Literacy: Examining Participants' Contributions to a Collaborative Family-Based Program

ERIC Educational Resources Information Center

Kumar, Tracey

2016-01-01

This study of participants' contributions to a university-based family literacy program was informed by both "funds of knowledge" (Moll, 1992) and "multiple literacies" (Auerbach, 1995). The study examined participants' contributions to the design, implementation, and evaluation of a university-based family literacy program. In…

Creation of security engineering programs by the Southwest Surety Institute

NASA Astrophysics Data System (ADS)

Romero, Van D.; Rogers, Bradley; Winfree, Tim; Walsh, Dan; Garcia, Mary Lynn

1998-12-01

The Southwest Surety Institute includes Arizona State University (ASU), Louisiana State University (LSU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL). The universities currently offer a full spectrum of post-secondary programs in security system design and evaluation, including an undergraduate minor, a graduate program, and continuing education programs. The programs are based on the methodology developed at Sandia National Laboratories over the past 25 years to protect critical nuclear assets. The programs combine basic concepts and principles from business, criminal justice, and technology to create an integrated performance-based approach to security system design and analysis. Existing university capabilities in criminal justice (NMSU), explosives testing and technology (NM Tech and LSU), and engineering technology (ASU) are leveraged to provide unique science-based programs that will emphasize the use of performance measures and computer analysis tools to prove the effectiveness of proposed systems in the design phase. Facility managers may then balance increased protection against the cost of implementation and risk mitigation, thereby enabling effective business decisions. Applications expected to benefit from these programs include corrections, law enforcement, counter-terrorism, critical infrastructure protection, financial and medical care fraud, industrial security, and border security.

Developing and Pretesting a Text Messaging Program for Health Behavior Change: Recommended Steps.

PubMed

Abroms, Lorien C; Whittaker, Robyn; Free, Caroline; Mendel Van Alstyne, Judith; Schindler-Ruwisch, Jennifer M

2015-12-21

A growing body of evidence demonstrates that text messaging-based programs (short message service [SMS]) on mobile phones can help people modify health behaviors. Most of these programs have consisted of automated and sometimes interactive text messages that guide a person through the process of behavior change. This paper provides guidance on how to develop text messaging programs aimed at changing health behaviors. Based on their collective experience in designing, developing, and evaluating text messaging programs and a review of the literature, the authors drafted the guide. One author initially drafted the guide and the others provided input and review. Steps for developing a text messaging program include conducting formative research for insights into the target audience and health behavior, designing the text messaging program, pretesting the text messaging program concept and messages, and revising the text messaging program. The steps outlined in this guide may help in the development of SMS-based behavior change programs.

[Effectiveness of a self-management program using goal setting based on a G-AP for patients after a stroke].

PubMed

Park, Min Gyeong; Ha, Yeongmi

2014-10-01

This study was conducted to develop a self-management program using goal setting for patients after a stroke. The program was based on a theory-based Goal setting and Action Planning framework (G-AP), and the effectiveness of the program was examined. A non-equivalent control group pretest-posttest design was used. The experimental group (n=30) received the self-management program using goal setting based on the G-AP over 7 weeks. The education was delivered individually with a specifically designed stroke workbook. The control group (n=30) received only patient information leaflets about stroke. There were significant differences between the two groups. Stroke knowledge, self-efficacy, and health behavior compliance were significantly higher (all p<.001), and hospital anxiety (p<.001) and depression (p<.001) were significantly lower in the experimental group compared to the control group. This self-management program using goal setting based on a G-AP was found to be useful and beneficial for patients in stroke rehabilitation settings.

Situated Research Design and Methodological Choices in Formative Program Evaluation

ERIC Educational Resources Information Center

Supovitz, Jonathan

2013-01-01

Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

Web-Based Engine for Program Curriculum Designers

ERIC Educational Resources Information Center

Hamam, H.; Loucif, S.

2009-01-01

Educational institutions pay careful attention to the design of program curricula, which represent a framework to meet institutional goals and missions. Of course, the success of any institution depends highly on the quality of its program curriculum. The development of such a curriculum and, more importantly, the evaluation of its quality are…

Leveraging Sociocultural Theory to Create a Mentorship Program for Doctoral Students

ERIC Educational Resources Information Center

Crosslin, Matt; Wakefield, Jenny S.; Bennette, Phyllis; Black, James William, III

2013-01-01

This paper details a proposed doctoral student connections program that is based on sociocultural theory. It is designed to assist new students with starting their educational journey. This program is designed to leverage social interactions, peer mentorship, personal reflection, purposeful planning, and existing resources to assist students in…

Cognitive Profiles and Early Reading Remediation of At-Risk Elementary School Students.

ERIC Educational Resources Information Center

Parrila, R. K.; Das, J. P.

Sixty-one grade 1 students experiencing early reading difficulties received either a cognitive remediation program (PREP; PASS Remediation Program) designed to facilitate successive and simultaneous processing skills, or a meaning-based language enrichment program designed to provide children with meaningful experiences in reading. Repeated…

What Do We Know about School-Based Management?

ERIC Educational Resources Information Center

Patrinos, Harry Anthony; Fasih, Tazeen; Barrera, Felipe; Garcia-Moreno, Vicente A.; Bentaouet-Kattan, Raja; Baksh, Shaista; Wickramasekera, Inosha

2007-01-01

Impact evaluations of school-based management (SBM) programs, or any other kind of program, are important because they can demonstrate whether or not the program has accomplished its objectives. Furthermore, these evaluations can identify ways to improve the design of the program. These evaluations can also make successful interventions…

Doorways II: Community Counselor Training Manual on School-Related Gender-Based Violence Prevention and Response

ERIC Educational Resources Information Center

US Agency for International Development, 2009

2009-01-01

The Doorways training program was designed by the U.S. Agency for International Development (USAID)-funded Safe Schools Program (Safe Schools) to enable teachers, community members and students to prevent and respond to school-related gender-based violence (SRGBV). Doorways II was designed for community counselors to prevent and respond to…

Outcomes of Community-Based Screening for Depression and Suicide Prevention among Japanese Elders

ERIC Educational Resources Information Center

Oyama, Hirofumi; Fujita, Motoi; Goto, Masahiro; Shibuya, Hiroshi; Sakashita, Tomoe

2006-01-01

Purpose: In this study we evaluate outcomes of a community-based program to prevent suicide among elderly individuals aged 65 and older. Design and Methods: We used a quasi-experimental design with intervention and referent municipalities. The program included a 7-year implementation of depression screening with follow-up by general practitioners…

Teaching Grocery Store Purchasing Skills to Students with Intellectual Disabilities Using a Computer-Based Instruction Program

ERIC Educational Resources Information Center

Hansen, David L.; Morgan, Robert L.

2008-01-01

This research evaluated effects of a multi-media computer-based instruction (CBI) program designed to teach grocery store purchasing skills to three high-school students with intellectual disabilities. A multiple baseline design across participants used measures of computer performance mastery and grocery store probes to evaluate the CBI. All…

An Assessment Program Designed To Improve Communication Instruction through a Competency-Based Core Curriculum.

ERIC Educational Resources Information Center

Aitken, Joan E.; Neer, Michael R.

This paper provides an example procedure used to design and install a program of assessment to improve communication instruction through a competency-based core curriculum at a mid-sized, urban university. The paper models the various steps in the process, and includes specific tests, forms, memos, course description, sources, and procedures which…

A Longitudinal Assessment of the Effectiveness of a School-Based Mentoring Program in Middle School

ERIC Educational Resources Information Center

Nunez, Jose Carlos; Rosario, Pedro; Vallejo, Guillermo; Gonzalez-Pienda, Julio Antonio

2013-01-01

This work assessed the efficacy of a middle-school-based mentoring program designed to increase student use of self-regulated learning (SRL) strategies, self-efficacy for and the perceived usefulness of SRL as well as mathematics and language achievement. A longitudinal cluster randomized trial study design obtained evidence that found…

Community-based participatory research to design a faith-enhanced diabetes prevention program: The Better Me Within randomized trial.

PubMed

Kitzman, Heather; Dodgen, Leilani; Mamun, Abdullah; Slater, J Lee; King, George; Slater, Donna; King, Alene; Mandapati, Surendra; DeHaven, Mark

2017-11-01

Reducing obesity positively impacts diabetes and cardiovascular risk; however, evidence-based lifestyle programs, such as the diabetes prevention program (DPP), show reduced effectiveness in African American (AA) women. In addition to an attenuated response to lifestyle programs, AA women also demonstrate high rates of obesity, diabetes, and cardiovascular disease. To address these disparities, enhancements to evidence-based lifestyle programs for AA women need to be developed and evaluated with culturally relevant and rigorous study designs. This study describes a community-based participatory research (CBPR) approach to design a novel faith-enhancement to the DPP for AA women. A long-standing CBPR partnership designed the faith-enhancement from focus group data (N=64 AA adults) integrating five components: a brief pastor led sermon, memory verse, in class or take-home faith activity, promises to remember, and scripture and prayer integrated into participant curriculum and facilitator materials. The faith components were specifically linked to weekly DPP learning objectives to strategically emphasize behavioral skills with religious principles. Using a CBPR approach, the Better Me Within trial was able to enroll 12 churches, screen 333 AA women, and randomize 221 (M age =48.8±11.2; M BMI =36.7±8.4; 52% technical or high school) after collection of objective eligibility measures. A prospective, randomized, nested by church, design will be used to evaluate the faith-enhanced DPP as compared to a standard DPP on weight, diabetes and cardiovascular risk, over a 16-week intervention and 10-month follow up. This study will provide essential data to guide enhancements to evidence-based lifestyle programs for AA women who are at high risk for chronic disease. Copyright © 2017 Elsevier Inc. All rights reserved.

The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 2: Program integration guide

NASA Technical Reports Server (NTRS)

Jones, Kennie H.; Randall, Donald P.; Stallcup, Scott S.; Rowell, Lawrence F.

1988-01-01

The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational data base management system. In volume 2, the use of a SYSTEM LIBRARY PROCESSOR is used to construct a DATA DICTIONARY describing all relations defined in the data base, and a TEMPLATE LIBRARY. A TEMPLATE is a description of all subsets of relations (including conditional selection criteria and sorting specifications) to be accessed as input or output for a given application. Together, these form the SYSTEM LIBRARY which is used to automatically produce the data base schema, FORTRAN subroutines to retrieve/store data from/to the data base, and instructions to a generic REVIEWER program providing review/modification of data for a given template. Automation of these functions eliminates much of the tedious, error prone work required by the usual approach to data base integration.

Overview of Faculty Development Programs for Interprofessional Education

PubMed Central

Zorek, Joseph A.; Meyer, Susan M.

2017-01-01

Objectives. To describe characteristics of faculty development programs designed to facilitate interprofessional education, and to compile recommendations for development, delivery, and assessment of such faculty development programs. Methods. MEDLINE, CINAHL, ERIC, and Web of Science databases were searched using three keywords: faculty development, interprofessional education, and health professions. Articles meeting inclusion criteria were analyzed for emergent themes, including program design, delivery, participants, resources, and assessment. Results. Seventeen articles were identified for inclusion, yielding five characteristics of a successful program: institutional support; objectives and outcomes based on interprofessional competencies; focus on consensus-building and group facilitation skills; flexibility based on institution- and participant-specific characteristics; and incorporation of an assessment strategy. Conclusion. The themes and characteristics identified in this literature overview may support development of faculty development programs for interprofessional education. An advanced evidence base for interprofessional education faculty development programs is needed. PMID:28720924

Contribution of formative research to design an environmental program for obesity prevention in schools in Mexico City.

PubMed

Bonvecchio, Anabelle; Théodore, Florence L; Safdie, Margarita; Duque, Tiffany; Villanueva, María Ángeles; Torres, Catalina; Rivera, Juan

2014-01-01

This paper describes the methods and key findings of formative research conducted to design a school-based program for obesity prevention. Formative research was based on the ecological model and the principles of social marketing. A mixed method approach was used. Qualitative (direct observation, indepth interviews, focus group discussions and photo-voice) and quantitative (closed ended surveys, checklists, anthropometry) methods were employed. Formative research key findings, including barriers by levels of the ecological model, were used for designing a program including environmental strategies to discourage the consumption of energy dense foods and sugar beverages. Formative research was fundamental to developing a context specific obesity prevention program in schools that seeks environment modification and behavior change.

Key Design Considerations When Calculating Cost Savings for Population Health Management Programs in an Observational Setting.

PubMed

Murphy, Shannon M E; Hough, Douglas E; Sylvia, Martha L; Dunbar, Linda J; Frick, Kevin D

2018-02-08

To illustrate the impact of key quasi-experimental design elements on cost savings measurement for population health management (PHM) programs. Population health management program records and Medicaid claims and enrollment data from December 2011 through March 2016. The study uses a difference-in-difference design to compare changes in cost and utilization outcomes between program participants and propensity score-matched nonparticipants. Comparisons of measured savings are made based on (1) stable versus dynamic population enrollment and (2) all eligible versus enrolled-only participant definitions. Options for the operationalization of time are also discussed. Individual-level Medicaid administrative and claims data and PHM program records are used to match study groups on baseline risk factors and assess changes in costs and utilization. Savings estimates are statistically similar but smaller in magnitude when eliminating variability based on duration of population enrollment and when evaluating program impact on the entire target population. Measurement in calendar time, when possible, simplifies interpretability. Program evaluation design elements, including population stability and participant definitions, can influence the estimated magnitude of program savings for the payer and should be considered carefully. Time specifications can also affect interpretability and usefulness. © Health Research and Educational Trust.

CAN-DO, CFD-based Aerodynamic Nozzle Design and Optimization program for supersonic/hypersonic wind tunnels

NASA Technical Reports Server (NTRS)

Korte, John J.; Kumar, Ajay; Singh, D. J.; White, J. A.

1992-01-01

A design program is developed which incorporates a modern approach to the design of supersonic/hypersonic wind-tunnel nozzles. The approach is obtained by the coupling of computational fluid dynamics (CFD) with design optimization. The program can be used to design a 2D or axisymmetric, supersonic or hypersonic, wind-tunnel nozzles that can be modeled with a calorically perfect gas. The nozzle design is obtained by solving a nonlinear least-squares optimization problem (LSOP). The LSOP is solved using an iterative procedure which requires intermediate flowfield solutions. The nozzle flowfield is simulated by solving the Navier-Stokes equations for the subsonic and transonic flow regions and the parabolized Navier-Stokes equations for the supersonic flow regions. The advantages of this method are that the design is based on the solution of the viscous equations eliminating the need to make separate corrections to a design contour, and the flexibility of applying the procedure to different types of nozzle design problems.

Results of an asthma disease management program in an urban pediatric community clinic.

PubMed

Newcomb, Patricia

2006-07-01

Asthma is increasing in incidence, but adherence to national diagnosis and treatment guidelines is poor. The Children's Asthma Management Program (CHAMP) was designed and implemented by nurse practitioners to address the problem of inconsistent asthma management. This is an outcome-based evaluation of a novel asthma management program in which practitioners created a structured mechanism for implementing national evidence-based asthma treatment guidelines. Children who completed the program experienced an 85% decrease in hospitalizations for asthma, 87% decrease in emergency room visits for asthma, and 71% decrease in acute office visits for asthma exacerbations. Patients may benefit from microsystem structures intentionally designed to facilitate implementation of evidence-based guidelines.

Gamification and Adherence to Web-Based Mental Health Interventions: A Systematic Review.

PubMed

Brown, Menna; O'Neill, Noelle; van Woerden, Hugo; Eslambolchilar, Parisa; Jones, Matt; John, Ann

2016-08-24

Adherence to effective Web-based interventions for common mental disorders (CMDs) and well-being remains a critical issue, with clear potential to increase effectiveness. Continued identification and examination of "active" technological components within Web-based interventions has been called for. Gamification is the use of game design elements and features in nongame contexts. Health and lifestyle interventions have implemented a variety of game features in their design in an effort to encourage engagement and increase program adherence. The potential influence of gamification on program adherence has not been examined in the context of Web-based interventions designed to manage CMDs and well-being. This study seeks to review the literature to examine whether gaming features predict or influence reported rates of program adherence in Web-based interventions designed to manage CMDs and well-being. A systematic review was conducted of peer-reviewed randomized controlled trials (RCTs) designed to manage CMDs or well-being and incorporated gamification features. Seven electronic databases were searched. A total of 61 RCTs met the inclusion criteria and 47 different intervention programs were identified. The majority were designed to manage depression using cognitive behavioral therapy. Eight of 10 popular gamification features reviewed were in use. The majority of studies utilized only one gamification feature (n=58) with a maximum of three features. The most commonly used feature was story/theme. Levels and game leaders were not used in this context. No studies explicitly examined the role of gamification features on program adherence. Usage data were not commonly reported. Interventions intended to be 10 weeks in duration had higher mean adherence than those intended to be 6 or 8 weeks in duration. Gamification features have been incorporated into the design of interventions designed to treat CMD and well-being. Further research is needed to improve understanding of gamification features on adherence and engagement in order to inform the design of future Web-based health interventions in which adherence to treatment is of concern. Conclusions were limited by varied reporting of adherence and usage data.

Gamification and Adherence to Web-Based Mental Health Interventions: A Systematic Review

PubMed Central

O'Neill, Noelle; van Woerden, Hugo; Eslambolchilar, Parisa; Jones, Matt; John, Ann

2016-01-01

Background Adherence to effective Web-based interventions for common mental disorders (CMDs) and well-being remains a critical issue, with clear potential to increase effectiveness. Continued identification and examination of “active” technological components within Web-based interventions has been called for. Gamification is the use of game design elements and features in nongame contexts. Health and lifestyle interventions have implemented a variety of game features in their design in an effort to encourage engagement and increase program adherence. The potential influence of gamification on program adherence has not been examined in the context of Web-based interventions designed to manage CMDs and well-being. Objective This study seeks to review the literature to examine whether gaming features predict or influence reported rates of program adherence in Web-based interventions designed to manage CMDs and well-being. Methods A systematic review was conducted of peer-reviewed randomized controlled trials (RCTs) designed to manage CMDs or well-being and incorporated gamification features. Seven electronic databases were searched. Results A total of 61 RCTs met the inclusion criteria and 47 different intervention programs were identified. The majority were designed to manage depression using cognitive behavioral therapy. Eight of 10 popular gamification features reviewed were in use. The majority of studies utilized only one gamification feature (n=58) with a maximum of three features. The most commonly used feature was story/theme. Levels and game leaders were not used in this context. No studies explicitly examined the role of gamification features on program adherence. Usage data were not commonly reported. Interventions intended to be 10 weeks in duration had higher mean adherence than those intended to be 6 or 8 weeks in duration. Conclusions Gamification features have been incorporated into the design of interventions designed to treat CMD and well-being. Further research is needed to improve understanding of gamification features on adherence and engagement in order to inform the design of future Web-based health interventions in which adherence to treatment is of concern. Conclusions were limited by varied reporting of adherence and usage data. PMID:27558893

NASIS data base management system - IBM 360/370 OS MVT implementation. 4: Program design specifications

NASA Technical Reports Server (NTRS)

1973-01-01

The design specifications for the programs and modules within the NASA Aerospace Safety Information System (NASIS) are presented. The purpose of the design specifications is to standardize the preparation of the specifications and to guide the program design. Each major functional module within the system is a separate entity for documentation purposes. The design specifications contain a description of, and specifications for, all detail processing which occurs in the module. Sub-modules, reference tables, and data sets which are common to several modules are documented separately.

NASIS data base management system: IBM 360 TSS implementation. Volume 4: Program design specifications

NASA Technical Reports Server (NTRS)

1973-01-01

The design specifications for the programs and modules within the NASA Aerospace Safety Information System (NASIS) are presented. The purpose of the design specifications is to standardize the preparation of the specifications and to guide the program design. Each major functional module within the system is a separate entity for documentation purposes. The design specifications contain a description of, and specifications for, all detail processing which occurs in the module. Sub-models, reference tables, and data sets which are common to several modules are documented separately.

Hyper-X: Flight Validation of Hypersonic Airbreathing Technology

NASA Technical Reports Server (NTRS)

Rausch, Vincent L.; McClinton, Charles R.; Crawford, J. Larry

1997-01-01

This paper provides an overview of NASA's focused hypersonic technology program, i.e. the Hyper-X program. This program is designed to move hypersonic, air breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. This paper presents some history leading to the flight test program, research objectives, approach, schedule and status. Substantial experimental data base and concept validation have been completed. The program is concentrating on Mach 7 vehicle development, verification and validation in preparation for wind tunnel testing in 1998 and flight testing in 1999. It is also concentrating on finalization of the Mach 5 and 10 vehicle designs. Detailed evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a data base for validation of design methods once flight test data are available.

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1994-01-01

DeMAID (A Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Groups modular subsystems on basis of interactions among them. Saves considerable money and time in total design process, particularly in new design problem in which order of modules has not been defined. Available in two machine versions: Macintosh and Sun.

Optimal design of structures with multiple design variables per group and multiple loading conditions on the personal computer

NASA Technical Reports Server (NTRS)

Nguyen, D. T.; Rogers, J. L., Jr.

1986-01-01

A finite element based programming system for minimum weight design of a truss-type structure subjected to displacement, stress, and lower and upper bounds on design variables is presented. The programming system consists of a number of independent processors, each performing a specific task. These processors, however, are interfaced through a well-organized data base, thus making the tasks of modifying, updating, or expanding the programming system much easier in a friendly environment provided by many inexpensive personal computers. The proposed software can be viewed as an important step in achieving a 'dummy' finite element for optimization. The programming system has been implemented on both large and small computers (such as VAX, CYBER, IBM-PC, and APPLE) although the focus is on the latter. Examples are presented to demonstrate the capabilities of the code. The present programming system can be used stand-alone or as part of the multilevel decomposition procedure to obtain optimum design for very large scale structural systems. Furthermore, other related research areas such as developing optimization algorithms (or in the larger level: a structural synthesis program) for future trends in using parallel computers may also benefit from this study.

Computer program for preliminary design analysis of axial-flow turbines

NASA Technical Reports Server (NTRS)

Glassman, A. J.

1972-01-01

The program method is based on a mean-diameter flow analysis. Input design requirements include power or pressure ratio, flow, temperature, pressure, and speed. Turbine designs are generated for any specified number of stages and for any of three types of velocity diagrams (symmetrical, zero exit swirl, or impulse). Exit turning vanes can be included in the design. Program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, blading angles, and last-stage critical velocity ratios. The report presents the analysis method, a description of input and output with sample cases, and the program listing.

Program Aids Design Of Fluid-Circulating Systems

NASA Technical Reports Server (NTRS)

Bacskay, Allen; Dalee, Robert

1992-01-01

Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

IGDS/TRAP Interface Program (ITIP). Software Design Document

NASA Technical Reports Server (NTRS)

Jefferys, Steve; Johnson, Wendell

1981-01-01

The preliminary design of the IGDS/TRAP Interface Program (ITIP) is described. The ITIP is implemented on the PDP 11/70 and interfaces directly with the Interactive Graphics Design System and the Data Management and Retrieval System. The program provides an efficient method for developing a network flow diagram. Performance requirements, operational rquirements, and design requirements are discussed along with sources and types of input and destination and types of output. Information processing functions and data base requirements are also covered.

Computer-aided system of evaluation for population-based all-in-one service screening (CASE-PASS): from study design to outcome analysis with bias adjustment.

PubMed

Chen, Li-Sheng; Yen, Amy Ming-Fang; Duffy, Stephen W; Tabar, Laszlo; Lin, Wen-Chou; Chen, Hsiu-Hsi

2010-10-01

Population-based routine service screening has gained popularity following an era of randomized controlled trials. The evaluation of these service screening programs is subject to study design, data availability, and the precise data analysis for adjusting bias. We developed a computer-aided system that allows the evaluation of population-based service screening to unify these aspects and facilitate and guide the program assessor to efficiently perform an evaluation. This system underpins two experimental designs: the posttest-only non-equivalent design and the one-group pretest-posttest design and demonstrates the type of data required at both the population and individual levels. Three major analyses were developed that included a cumulative mortality analysis, survival analysis with lead-time adjustment, and self-selection bias adjustment. We used SAS AF software to develop a graphic interface system with a pull-down menu style. We demonstrate the application of this system with data obtained from a Swedish population-based service screen and a population-based randomized controlled trial for the screening of breast, colorectal, and prostate cancer, and one service screening program for cervical cancer with Pap smears. The system provided automated descriptive results based on the various sources of available data and cumulative mortality curves corresponding to the study designs. The comparison of cumulative survival between clinically and screen-detected cases without a lead-time adjustment are also demonstrated. The intention-to-treat and noncompliance analysis with self-selection bias adjustments are also shown to assess the effectiveness of the population-based service screening program. Model validation was composed of a comparison between our adjusted self-selection bias estimates and the empirical results on effectiveness reported in the literature. We demonstrate a computer-aided system allowing the evaluation of population-based service screening programs with an adjustment for self-selection and lead-time bias. This is achieved by providing a tutorial guide from the study design to the data analysis, with bias adjustment. Copyright © 2010 Elsevier Inc. All rights reserved.

RESOLV: Development of a Telephone-Based Program Designed to Increase Socialization in Older Veterans

ERIC Educational Resources Information Center

Gould, Christine E.; Shah, Shruti; Brunskill, Sarah R.; Brown, Krista; Oliva, Nancy L.; Hosseini, Charissa; Bauer, Elizabeth; Huh, J. W. Terri

2017-01-01

We describe the development of a telephone-based program, Recreation, Education, and Socialization for Older Learning Veterans (RESOLV) that aims to connect Veterans with one another by phone and thereby reduce loneliness. The program was developed through a collaboration between VA and a community-based organization, Episcopal Senior Communities…

MAIL LOG, program theory, volume 1. [Scout project automatic data system

NASA Technical Reports Server (NTRS)

Harris, D. K.

1979-01-01

The program theory used to obtain the software package, MAIL LOG, developed for the Scout Project Automatic Data System, SPADS, is described. The program is written in FORTRAN for the PRIME 300 computer system. The MAIL LOG data base consists of three main subfiles: (1) incoming and outgoing mail correspondence; (2) design information releases and reports; and (3) drawings and engineering orders. All subroutine descriptions, flowcharts, and MAIL LOG outputs are given and the data base design is described.

Research and design of logistical information system based on SOA

NASA Astrophysics Data System (ADS)

Zhang, Bo

2013-03-01

Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

Evaluation of Embedded System Component Utilized in Delivery Integrated Design Project Course

NASA Astrophysics Data System (ADS)

Junid, Syed Abdul Mutalib Al; Hussaini, Yusnira; Nazmie Osman, Fairul; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

2018-03-01

This paper reports the evaluation of the embedded system component utilized in delivering the integrated electronic engineering design project course. The evaluation is conducted based on the report project submitted as to fulfil the assessment criteria for the integrated electronic engineering design project course named; engineering system design. Six projects were assessed in this evaluation. The evaluation covers the type of controller, programming language and the number of embedded component utilization as well. From the evaluation, the C-programming based language is the best solution preferred by the students which provide them flexibility in the programming. Moreover, the Analog to Digital converter is intensively used in the projects which include sensors in their proposed design. As a conclusion, in delivering the integrated design project course, the knowledge over the embedded system solution is very important since the high density of the knowledge acquired in accomplishing the project assigned.

An Inquiry-Based Microbiology Short Course in the SUMS Program at Hartnell College

NASA Astrophysics Data System (ADS)

Dorighi, K. M.; Petrella, L.; McCann, S.; Metevier, A. J.

2010-12-01

In this paper, we describe our design and implementation of inquiry-based biology units for the Summer Undergraduate Math and Science (SUMS) program at Hartnell College. The SUMS bridge program is designed to encourage local minority students with unrealized potential to enter and excel in Math and Science college curricula. The inquiry activities we designed prompted students to investigate where bacteria live in the students' environment and how effective different cleaning products are at killing these bacteria. These investigations required students to create their own testable questions and design and carry out experiments to test them. By the end of the program the students demonstrated a command of the scientific method and reported feeling like real scientists. While this unit was taught in four consecutive days, it could easily be translated to a more traditional weekly college lab schedule.

Methodological convergence of program evaluation designs.

PubMed

Chacón-Moscoso, Salvador; Anguera, M Teresa; Sanduvete-Chaves, Susana; Sánchez-Martín, Milagrosa

2014-01-01

Nowadays, the confronting dichotomous view between experimental/quasi-experimental and non-experimental/ethnographic studies still exists but, despite the extensive use of non-experimental/ethnographic studies, the most systematic work on methodological quality has been developed based on experimental and quasi-experimental studies. This hinders evaluators and planners' practice of empirical program evaluation, a sphere in which the distinction between types of study is changing continually and is less clear. Based on the classical validity framework of experimental/quasi-experimental studies, we carry out a review of the literature in order to analyze the convergence of design elements in methodological quality in primary studies in systematic reviews and ethnographic research. We specify the relevant design elements that should be taken into account in order to improve validity and generalization in program evaluation practice in different methodologies from a practical methodological and complementary view. We recommend ways to improve design elements so as to enhance validity and generalization in program evaluation practice.

Developing a Volunteer Program for Public Environmental Education.

ERIC Educational Resources Information Center

Meehan, Donald B.; Berta, Susan

Volunteers can serve as a means to educate the public about environmental issues and increase stewardship ethic. This booklet is designed to provide much of the key information about designing and managing environmental volunteer programs to educate the general public. The booklet is based on the experiences of a volunteer program called Island…

Program Evolves from Basic CAD to Total Manufacturing Experience

ERIC Educational Resources Information Center

Cassola, Joel

2011-01-01

Close to a decade ago, John Hersey High School (JHHS) in Arlington Heights, Illinois, made a transition from a traditional classroom-based pre-engineering program. The new program is geared towards helping students understand the entire manufacturing process. Previously, a JHHS student would design a project in computer-aided design (CAD) software…

A Model for Designing Peer-Initiated Activities to Promote Racial Awareness and an Appreciation of Differences.

ERIC Educational Resources Information Center

Mann, Barbara A.; Moser, Rita M.

1991-01-01

Presents a theoretical framework suggesting ways to design peer intervention programs and group existing programs. Suggests criteria for effective racial awareness programs, discussing examples of successful college prejudice activities. Notes diversity education efforts are most successful when based on a theoretical model that recognizes the…

Curriculum, Technology, and Education Reform (CTER) Online: Evaluation of an Online Master of Education Program.

ERIC Educational Resources Information Center

Levin, Sandra R.; Levin, James A.; Guell, James G.; Waddoups, Gregory L.

2002-01-01

Describes a Master of Education program at the University of Illinois, Urbana-Champaign called Curriculum, Technology, and Education Reform OnLine (CTER) that is aimed at K-12 teachers. The evaluation based on program stakeholders includes interface design; instructional design; faculty satisfaction; student attitudes; economic viability;…

Career Exploration Program: A Cluster Approach. Publication No. 0057.

ERIC Educational Resources Information Center

Ansbro, William; And Others

Based on the occupational clusters designated by the Department of Health, Education and Welfare, this curriculum guide presents a career exploration program for junior high and middle school students. The program, presented in eighty-minute weekly sessions, is designed as an alternative activity in which students can elect to explore a wide…

Building the Case for Large Scale Behavioral Education Adoptions

ERIC Educational Resources Information Center

Layng, Zachary R.; Layng, T. V. Joe

2012-01-01

Behaviorally-designed educational programs are often based on a research tradition that is not widely understood by potential users of the programs. Though the data may be sound and the prediction of outcomes for individual learners quite good, those advocating adoption of behaviorally-designed educational programs may need to do more in order to…

77 FR 74351 - Fees for Reviews of the Rule Enforcement Programs of Designated Contract Markets and Registered...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... Budget Program Activity Codes (BPAC) system, formerly the Management Accounting Structure Codes (MASC... charges fees to designated contract markets and registered futures associations to recover the costs... notice is based upon an average of actual program costs incurred during FY 2009, 2010, and 2011. DATES...

English as a Second Language: Implementing Effective Adult Education Programs.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Adult, Alternative, and Continuation Education Div.

The manual is designed to assist California educators and public in understanding the various aspects of an effective English-as-a-Second-Language (ESL) program for adults. It provides theory-based and practical guidelines for conceptualizing, planning, designing, managing, and evaluating such programs. Chapters address these topics: the adult ESL…

Dynamic Learning Objects to Teach Java Programming Language

ERIC Educational Resources Information Center

Narasimhamurthy, Uma; Al Shawkani, Khuloud

2010-01-01

This article describes a model for teaching Java Programming Language through Dynamic Learning Objects. The design of the learning objects was based on effective learning design principles to help students learn the complex topic of Java Programming. Visualization was also used to facilitate the learning of the concepts. (Contains 1 figure and 2…

Development and evaluation of a school-based asthma educational program.

PubMed

Al Aloola, Noha Abdullah; Saba, Maya; Nissen, Lisa; Alewairdhi, Huda Abdullaziz; Alaloola, Alhnouf; Saini, Bandana

2017-05-01

To develop, implement, and evaluate the effects of a school-based asthma educational program on Saudi primary school teachers' asthma awareness and competence in delivering asthma-related first aid interventions. An asthma educational intervention program entitled "School Asthma Action Program" (SAAP) was designed based on pedagogical principles and implemented among teachers randomly selected from girls' primary schools in Riyadh, Saudi Arabia. This pilot study employed a pre-test/post-test experimental design. A previously tested asthma awareness questionnaire and a custom-designed asthma competence score sheet were used to evaluate the effects of the educational intervention program on teacher's asthma awareness and competence in providing asthma-related first aid interventions at schools. Forty-seven teachers from five different primary schools participated in the program. Of the 47 teachers, 39 completed both the pre- and post-program questionnaires. The SAAP improved teachers' awareness of asthma (teachers' median pre-program score was 11 (range 5-18) and their post-program score was 15 (range 7-18), p < 0.001) and their attitudes toward asthma management at schools (teachers' median pre-program score was 74 (range 15-75) and their post-program score was 75 (range 15-75), p = 0.043). Further, it improved teachers' competence in providing asthma-related first aid interventions (teachers' mean pre-program score was 1.4 ± 2.3 and their mean post-program score was 9.8 ± 0.5, p < 0.001). After completing the SAAP, a high proportion of teachers reported increased confidence in providing care to children with asthma at school. School-based asthma educational programs can significantly improve teachers' knowledge of asthma and their competence in providing asthma-related first aid interventions during emergencies.

Evidence Based Bullying Prevention in Turkey: Implementation of the ViSC Social Competence Program

ERIC Educational Resources Information Center

Dogan, Aysun; Keser, Eda; Sen, Zeynep; Yanagida, Takuya; Gradinger, Petra; Strohmeier, Dagmar

2017-01-01

The ViSC program is the first evidence based anti-bullying program implemented in Turkey. A quasi-experimental longitudinal control group design comprising six schools and 26 classes was realized to examine the program effectiveness regarding different forms of perpetration and victimization. The effectiveness of two dosages of…

A Guide for Delinquency Prevention Programs Based in School Activities: A Working Paper.

ERIC Educational Resources Information Center

Johnson, Grant; And Others

This paper is intended to help program developers to initiate or refine school-based, self-contained delinquency prevention programs. These programs are limited, short-term efforts to minimize delinquent behavior among youth by creating school situations in which the factors that contribute to delinquent behavior are reduced. Designed as an…

Expert System for Automated Design Synthesis

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Barthelemy, Jean-Francois M.

1987-01-01

Expert-system computer program EXADS developed to aid users of Automated Design Synthesis (ADS) general-purpose optimization program. EXADS aids engineer in determining best combination based on knowledge of specific problem and expert knowledge stored in knowledge base. Available in two interactive machine versions. IBM PC version (LAR-13687) written in IQ-LISP. DEC VAX version (LAR-13688) written in Franz-LISP.

Tools for Economic Analysis of Patient Management Interventions in Heart Failure Cost-Effectiveness Model: A Web-based program designed to evaluate the cost-effectiveness of disease management programs in heart failure.

PubMed

Reed, Shelby D; Neilson, Matthew P; Gardner, Matthew; Li, Yanhong; Briggs, Andrew H; Polsky, Daniel E; Graham, Felicia L; Bowers, Margaret T; Paul, Sara C; Granger, Bradi B; Schulman, Kevin A; Whellan, David J; Riegel, Barbara; Levy, Wayne C

2015-11-01

Heart failure disease management programs can influence medical resource use and quality-adjusted survival. Because projecting long-term costs and survival is challenging, a consistent and valid approach to extrapolating short-term outcomes would be valuable. We developed the Tools for Economic Analysis of Patient Management Interventions in Heart Failure Cost-Effectiveness Model, a Web-based simulation tool designed to integrate data on demographic, clinical, and laboratory characteristics; use of evidence-based medications; and costs to generate predicted outcomes. Survival projections are based on a modified Seattle Heart Failure Model. Projections of resource use and quality of life are modeled using relationships with time-varying Seattle Heart Failure Model scores. The model can be used to evaluate parallel-group and single-cohort study designs and hypothetical programs. Simulations consist of 10,000 pairs of virtual cohorts used to generate estimates of resource use, costs, survival, and incremental cost-effectiveness ratios from user inputs. The model demonstrated acceptable internal and external validity in replicating resource use, costs, and survival estimates from 3 clinical trials. Simulations to evaluate the cost-effectiveness of heart failure disease management programs across 3 scenarios demonstrate how the model can be used to design a program in which short-term improvements in functioning and use of evidence-based treatments are sufficient to demonstrate good long-term value to the health care system. The Tools for Economic Analysis of Patient Management Interventions in Heart Failure Cost-Effectiveness Model provides researchers and providers with a tool for conducting long-term cost-effectiveness analyses of disease management programs in heart failure. Copyright © 2015 Elsevier Inc. All rights reserved.

Structural Optimization for Reliability Using Nonlinear Goal Programming

NASA Technical Reports Server (NTRS)

El-Sayed, Mohamed E.

1999-01-01

This report details the development of a reliability based multi-objective design tool for solving structural optimization problems. Based on two different optimization techniques, namely sequential unconstrained minimization and nonlinear goal programming, the developed design method has the capability to take into account the effects of variability on the proposed design through a user specified reliability design criterion. In its sequential unconstrained minimization mode, the developed design tool uses a composite objective function, in conjunction with weight ordered design objectives, in order to take into account conflicting and multiple design criteria. Multiple design criteria of interest including structural weight, load induced stress and deflection, and mechanical reliability. The nonlinear goal programming mode, on the other hand, provides for a design method that eliminates the difficulty of having to define an objective function and constraints, while at the same time has the capability of handling rank ordered design objectives or goals. For simulation purposes the design of a pressure vessel cover plate was undertaken as a test bed for the newly developed design tool. The formulation of this structural optimization problem into sequential unconstrained minimization and goal programming form is presented. The resulting optimization problem was solved using: (i) the linear extended interior penalty function method algorithm; and (ii) Powell's conjugate directions method. Both single and multi-objective numerical test cases are included demonstrating the design tool's capabilities as it applies to this design problem.

Understanding Complexity and Self-Organization in a Defense Program Management Organization (Experimental Design)

DTIC Science & Technology

2016-03-18

SPONSORED REPORT SERIES Understanding Complexity and Self - Organization in a Defense Program Management Organization (Experimental Design...experiment will examine the decision-making process within the program office and the self - organization of key program office personnel based upon formal...and informal communications links. Additionally, we are interested in the effects of this self - organizing process on the organization’s shared

A Semi-Infinite Programming based algorithm for determining T-optimum designs for model discrimination

PubMed Central

Duarte, Belmiro P.M.; Wong, Weng Kee; Atkinson, Anthony C.

2016-01-01

T-optimum designs for model discrimination are notoriously difficult to find because of the computational difficulty involved in solving an optimization problem that involves two layers of optimization. Only a handful of analytical T-optimal designs are available for the simplest problems; the rest in the literature are found using specialized numerical procedures for a specific problem. We propose a potentially more systematic and general way for finding T-optimal designs using a Semi-Infinite Programming (SIP) approach. The strategy requires that we first reformulate the original minimax or maximin optimization problem into an equivalent semi-infinite program and solve it using an exchange-based method where lower and upper bounds produced by solving the outer and the inner programs, are iterated to convergence. A global Nonlinear Programming (NLP) solver is used to handle the subproblems, thus finding the optimal design and the least favorable parametric configuration that minimizes the residual sum of squares from the alternative or test models. We also use a nonlinear program to check the global optimality of the SIP-generated design and automate the construction of globally optimal designs. The algorithm is successfully used to produce results that coincide with several T-optimal designs reported in the literature for various types of model discrimination problems with normally distributed errors. However, our method is more general, merely requiring that the parameters of the model be estimated by a numerical optimization. PMID:27330230

A Semi-Infinite Programming based algorithm for determining T-optimum designs for model discrimination.

PubMed

Duarte, Belmiro P M; Wong, Weng Kee; Atkinson, Anthony C

2015-03-01

T-optimum designs for model discrimination are notoriously difficult to find because of the computational difficulty involved in solving an optimization problem that involves two layers of optimization. Only a handful of analytical T-optimal designs are available for the simplest problems; the rest in the literature are found using specialized numerical procedures for a specific problem. We propose a potentially more systematic and general way for finding T-optimal designs using a Semi-Infinite Programming (SIP) approach. The strategy requires that we first reformulate the original minimax or maximin optimization problem into an equivalent semi-infinite program and solve it using an exchange-based method where lower and upper bounds produced by solving the outer and the inner programs, are iterated to convergence. A global Nonlinear Programming (NLP) solver is used to handle the subproblems, thus finding the optimal design and the least favorable parametric configuration that minimizes the residual sum of squares from the alternative or test models. We also use a nonlinear program to check the global optimality of the SIP-generated design and automate the construction of globally optimal designs. The algorithm is successfully used to produce results that coincide with several T-optimal designs reported in the literature for various types of model discrimination problems with normally distributed errors. However, our method is more general, merely requiring that the parameters of the model be estimated by a numerical optimization.

Design and Implementation of a Tool for Teaching Programming.

ERIC Educational Resources Information Center

Goktepe, Mesut; And Others

1989-01-01

Discussion of the use of computers in education focuses on a graphics-based system for teaching the Pascal programing language for problem solving. Topics discussed include user interface; notification based systems; communication processes; object oriented programing; workstations; graphics architecture; and flowcharts. (18 references) (LRW)

SEASAT A satellite scatterometer

NASA Technical Reports Server (NTRS)

Bianchi, R.; Heath, A.; Marsh, S.; Borusiewicz, J.

1978-01-01

The analyses performed in the early period of the program which formed the basis of the sensor design is reviewed, along with the sensor design. The test program is outlined, listing all tests performed and the environmental exposure (simulated) for each, as applicable. Ground support equipment designed and built for assembly integration and field testing is described. The software developed during the program and the algorithms/flow diagrams which formed the bases for the software are summarized.

Using the Knowledge, Process, Practice (KPP) model for driving the design and development of online postgraduate medical education.

PubMed

Shaw, Tim; Barnet, Stewart; Mcgregor, Deborah; Avery, Jennifer

2015-01-01

Online learning is a primary delivery method for continuing health education programs. It is critical that programs have curricula objectives linked to educational models that support learning. Using a proven educational modelling process ensures that curricula objectives are met and a solid basis for learning and assessment is achieved. To develop an educational design model that produces an educationally sound program development plan for use by anyone involved in online course development. We have described the development of a generic educational model designed for continuing health education programs. The Knowledge, Process, Practice (KPP) model is founded on recognised educational theory and online education practice. This paper presents a step-by-step guide on using this model for program development that encases reliable learning and evaluation. The model supports a three-step approach, KPP, based on learning outcomes and supporting appropriate assessment activities. It provides a program structure for online or blended learning that is explicit, educationally defensible, and supports multiple assessment points for health professionals. The KPP model is based on best practice educational design using a structure that can be adapted for a variety of online or flexibly delivered postgraduate medical education programs.

78 FR 5035 - Final Priorities; Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... flexibility where possible, and develop and implement a study design that would answer important questions... basic design requirements--for both program management and evaluation purposes--for data and account... commenter stated that based on its experience with schools, local governments, and others in the design and...

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

PubMed Central

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

Interior Design Education within a Human Ecological Framework

ERIC Educational Resources Information Center

Kaup, Migette L.; Anderson, Barbara G.; Honey, Peggy

2007-01-01

An education based in human ecology can greatly benefit interior designers as they work to understand and improve the human condition. Design programs housed in colleges focusing on human ecology can improve the interior design profession by taking advantage of their home base and emphasizing the human ecological framework in the design curricula.…

Design and evaluation of the computer-based training program Calcularis for enhancing numerical cognition

PubMed Central

Käser, Tanja; Baschera, Gian-Marco; Kohn, Juliane; Kucian, Karin; Richtmann, Verena; Grond, Ursina; Gross, Markus; von Aster, Michael

2013-01-01

This article presents the design and a first pilot evaluation of the computer-based training program Calcularis for children with developmental dyscalculia (DD) or difficulties in learning mathematics. The program has been designed according to insights on the typical and atypical development of mathematical abilities. The learning process is supported through multimodal cues, which encode different properties of numbers. To offer optimal learning conditions, a user model completes the program and allows flexible adaptation to a child's individual learning and knowledge profile. Thirty-two children with difficulties in learning mathematics completed the 6–12-weeks computer training. The children played the game for 20 min per day for 5 days a week. The training effects were evaluated using neuropsychological tests. Generally, children benefited significantly from the training regarding number representation and arithmetic operations. Furthermore, children liked to play with the program and reported that the training improved their mathematical abilities. PMID:23935586

Assessing a Faculty Development Program for the Adoption of Brain-Based Learning Strategies

ERIC Educational Resources Information Center

Lavis, Catherine C.; Williams, Kimberly A.; Fallin, Jana; Barnes, Pamela K.; Fishback, Sarah J.; Thien, Stephen

2016-01-01

Kansas State University designed a 20-month faculty development program with the goal of fostering broad, institution-wide adoption of teaching practices that focus on brain-based learning. Components of the program included annual teaching and learning workshops, reading and discussion groups based on content of a book about how the brain learns…

Planning Community-Based Assessments of HIV Educational Intervention Programs in Sub-Saharan Africa

ERIC Educational Resources Information Center

Kelcey, Ben; Shen, Zuchao

2017-01-01

A key consideration in planning studies of community-based HIV education programs is identifying a sample size large enough to ensure a reasonable probability of detecting program effects if they exist. Sufficient sample sizes for community- or group-based designs are proportional to the correlation or similarity of individuals within communities.…

Adapting an in-person patient-caregiver communication intervention to a tailored web-based format.

PubMed

Zulman, Donna M; Schafenacker, Ann; Barr, Kathryn L C; Moore, Ian T; Fisher, Jake; McCurdy, Kathryn; Derry, Holly A; Saunders, Edward W; An, Lawrence C; Northouse, Laurel

2012-03-01

Interventions that target cancer patients and their caregivers have been shown to improve patient-caregiver communication, support, and emotional well-being. To adapt an in-person communication intervention for cancer patients and caregivers to a web-based format, and to examine the usability and acceptability of the web-based program among representative users. A tailored, interactive web-based communication program for cancer patients and their family caregivers was developed based on an existing in-person, nurse-delivered intervention. The development process involved: (1) building a multidisciplinary team of content and web design experts, (2) combining key components of the in-person intervention with the unique tailoring and interactive features of a web-based platform, and (3) conducting focus groups and usability testing to obtain feedback from representative program users at multiple time points. Four focus groups with 2-3 patient-caregiver pairs per group (n = 22 total participants) and two iterations of usability testing with four patient-caregiver pairs per session (n = 16 total participants) were conducted. Response to the program's structure, design, and content was favorable, even among users who were older or had limited computer and Internet experience. The program received high ratings for ease of use and overall usability (mean System Usability Score of 89.5 out of 100). Many elements of a nurse-delivered patient-caregiver intervention can be successfully adapted to a web-based format. A multidisciplinary design team and an iterative evaluation process with representative users were instrumental in the development of a usable and well-received web-based program. Copyright © 2011 John Wiley & Sons, Ltd.

Brief Report: Adapting an In-Person Patient-Caregiver Communication Intervention to a Tailored Web-Based Format

PubMed Central

Zulman, Donna M.; Schafenacker, Ann; Barr, Kathryn L.C.; Moore, Ian T.; Fisher, Jake; McCurdy, Kathryn; Derry, Holly A.; Saunders, Edward W.; An, Lawrence C.; Northouse, Laurel

2011-01-01

Background Interventions that target cancer patients and their caregivers have been shown to improve communication, support, and emotional well-being. Objective To adapt an in-person communication intervention for cancer patients and caregivers to a web-based format, and to examine the usability and acceptability of the web-based program among representative users. Methods A tailored, interactive web-based communication program for cancer patients and their family caregivers was developed based on an existing in-person, nurse-delivered intervention. The development process involved: 1) building a multidisciplinary team of content and web design experts, 2) combining key components of the in-person intervention with the unique tailoring and interactive features of a web-based platform, and 3) conducting focus groups and usability testing to obtain feedback from representative program users at multiple time points. Results Four focus groups with 2 to 3 patient-caregiver pairs per group (n = 22 total participants) and two iterations of usability testing with 4 patient-caregiver pairs per session (n = 16 total participants) were conducted. Response to the program's structure, design, and content was favorable, even among users who were older or had limited computer and internet experience. The program received high ratings for ease of use and overall usability (mean System Usability Score of 89.5 out of 100). Conclusions Many elements of a nurse-delivered patient-caregiver intervention can be successfully adapted to a web-based format. A multidisciplinary design team and an iterative evaluation process with representative users were instrumental in the development of a usable and well-received web-based program. PMID:21830255

Experiences at Langley Research Center in the application of optimization techniques to helicopter airframes for vibration reduction

NASA Technical Reports Server (NTRS)

Murthy, T. Sreekanta; Kvaternik, Raymond G.

1991-01-01

A NASA/industry rotorcraft structural dynamics program known as Design Analysis Methods for VIBrationS (DAMVIBS) was initiated at Langley Research Center in 1984 with the objective of establishing the technology base needed by the industry for developing an advanced finite-element-based vibrations design analysis capability for airframe structures. As a part of the in-house activities contributing to that program, a study was undertaken to investigate the use of formal, nonlinear programming-based, numerical optimization techniques for airframe vibrations design work. Considerable progress has been made in connection with that study since its inception in 1985. This paper presents a unified summary of the experiences and results of that study. The formulation and solution of airframe optimization problems are discussed. Particular attention is given to describing the implementation of a new computational procedure based on MSC/NASTRAN and CONstrained function MINimization (CONMIN) in a computer program system called DYNOPT for the optimization of airframes subject to strength, frequency, dynamic response, and fatigue constraints. The results from the application of the DYNOPT program to the Bell AH-1G helicopter are presented and discussed.

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

ERIC Educational Resources Information Center

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

Designing and Deploying Programming Courses: Strategies, Tools, Difficulties and Pedagogy

ERIC Educational Resources Information Center

Xinogalos, Stelios

2016-01-01

Designing and deploying programming courses is undoubtedly a challenging task. In this paper, an attempt to analyze important aspects of a sequence of two courses on imperative-procedural and object-oriented programming in a non-CS majors Department is made. This analysis is based on a questionnaire filled in by fifty students in a voluntary…

Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

ERIC Educational Resources Information Center

Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

2015-01-01

The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

A Mexico City-Based Immersion Education Program: Training Mental Health Clinicians for Practice with Latino Communities

ERIC Educational Resources Information Center

Platt, Jason James

2012-01-01

This article describes the philosophical foundations and educational methods of a Spanish language and cultural immersion program based in Mexico City, Mexico. The program is designed to assist U.S. graduate students in marriage and family therapy and clinical psychology programs to improve clinical service delivery with Latino clients. Utilizing…

Use of Program Theory in a Nutrition Program for Grandchildren and Grandparents

ERIC Educational Resources Information Center

Koenings, Mallory; Arscott, Sara

2013-01-01

Grandparents University ® (GPU) is a 2-day campus-based nutrition education program for grandparents and grandchildren based on constructs from Social Cognitive Theory and the Theory of Planned Behavior. This article describes how program theory was used to develop a working model, design activities, and select outcome measures of a 2-day…

A Drop-Out Prevention Program for High-Risk Inner-City Youth

ERIC Educational Resources Information Center

Lever, Nancy; Sander, Mark A.; Lombardo, Sylvie; Randall, Camille; Axelrod, Jennifer; Rubenstein, Michelle; Weist, Mark D.

2004-01-01

Inner-city youth are at high risk for dropping out of high school. Within this article, risk factors associated with dropout and strategies for effective prevention and intervention are reviewed. An example of a school-based drop-out prevention program is highlighted. The FUTURES Program is a school-based drop-out prevention program designed to…

Zero-G Workstation Design

NASA Technical Reports Server (NTRS)

Gundersen, R. T.; Bond, R. L.

1976-01-01

Zero-g workstations were designed throughout manned spaceflight, based on different criteria and requirements for different programs. The history of design of these workstations is presented along with a thorough evaluation of selected Skylab workstations (the best zero-g experience available on the subject). The results were applied to on-going and future programs, with special emphasis on the correlation of neutral body posture in zero-g to workstation design. Where selected samples of shuttle orbiter workstations are shown as currently designed and compared to experience gained during prior programs in terms of man machine interface design, the evaluations were done in a generic sense to show the methods of applying evaluative techniques.

Heavy hydrocarbon main injector technology program

NASA Technical Reports Server (NTRS)

Arbit, H. A.; Tuegel, L. M.; Dodd, F. E.

1991-01-01

The Heavy Hydrocarbon Main Injector Program was an analytical, design, and test program to demonstrate an injection concept applicable to an Isolated Combustion Compartment of a full-scale, high pressure, LOX/RP-1 engine. Several injector patterns were tested in a 3.4-in. combustor. Based on these results, features of the most promising injector design were incorporated into a 5.7-in. injector which was then hot-fire tested. In turn, a preliminary design of a 5-compartment 2D combustor was based on this pattern. Also the additional subscale injector testing and analysis was performed with an emphasis on improving analytical techniques and acoustic cavity design methodology. Several of the existing 3.5-in. diameter injectors were hot-fire tested with and without acoustic cavities for spontaneous and dynamic stability characteristics.

Satellite Data Processing System (SDPS) users manual V1.0

NASA Technical Reports Server (NTRS)

Caruso, Michael; Dunn, Chris

1989-01-01

SDPS is a menu driven interactive program designed to facilitate the display and output of image and line-based data sets common to telemetry, modeling and remote sensing. This program can be used to display up to four separate raster images and overlay line-based data such as coastlines, ship tracks and velocity vectors. The program uses multiple windows to communicate information with the user. At any given time, the program may have up to four image display windows as well as auxiliary windows containing information about each image displayed. SDPS is not a commercial program. It does not contain complete type checking or error diagnostics which may allow the program to crash. Known anomalies will be mentioned in the appropriate section as notes or cautions. SDPS was designed to be used on Sun Microsystems Workstations running SunView1 (Sun Visual/Integrated Environment for Workstations). It was primarily designed to be used on workstations equipped with color monitors, but most of the line-based functions and several of the raster-based functions can be used with monochrome monitors. The program currently runs on Sun 3 series workstations running Sun OS 4.0 and should port easily to Sun 4 and Sun 386 series workstations with SunView1. Users should also be familiar with UNIX, Sun workstations and the SunView window system.

Data base architecture for instrument characteristics critical to spacecraft conceptual design

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Allen, Cheryl L.

1990-01-01

Spacecraft designs are driven by the payloads and mission requirements that they support. Many of the payload characteristics, such as mass, power requirements, communication requirements, moving parts, and so forth directly affect the choices for the spacecraft structural configuration and its subsystem design and component selection. The conceptual design process, which translates mission requirements into early spacecraft concepts, must be tolerant of frequent changes in the payload complement and resource requirements. A computer data base was designed and implemented for the purposes of containing the payload characteristics pertinent for spacecraft conceptual design, tracking the evolution of these payloads over time, and enabling the integration of the payload data with engineering analysis programs for improving the efficiency in producing spacecraft designs. In-house tools were used for constructing the data base and for performing the actual integration with an existing program for optimizing payload mass locations on the spacecraft.

Formal and Informal Context Factors as Contributors to Student Engagement in a Guided Discovery-Based Program of Game Design Learning

ERIC Educational Resources Information Center

Reynolds, Rebecca; Chiu, Ming Ming

2013-01-01

This paper explored informal (after-school) and formal (elective course in-school) learning contexts as contributors to middle-school student attitudinal changes in a guided discovery-based and blended e-learning program in which students designed web games and used social media and information resources for a full school year. Formality of the…

Design considerations and strategies for lunar-based observations

NASA Technical Reports Server (NTRS)

Snoddy, William C.; Nein, Max E.; Hilchey, John D.

1994-01-01

This paper addresses the design considerations and strategies for astrophysical observations as key elements of an international solar system exploration program. Emphasis is placed on the technical and programmatic challenges and opportunities associated with an evolving program of lunar-based astronomy. Both robotic and human tended facilities are discussed ranging from relatively small meter-class transit telescopes to large interferometer and filled-aperture systems.

Effects of Design-Based Science Instruction on Science Problem-Solving Competency among Different Groups of High-School Traditional Chemistry Students

ERIC Educational Resources Information Center

Lartson, Cobina Adu

2013-01-01

Recent trends indicate a significant decline in the number of students graduating from Science, Technology, Engineering and Math (STEM) programs in the US. The under-representation of students of color, females and low income students in STEM programs has also been documented. Design Based Science (DBS) instruction has been suggested to improve…

Improving Body Satisfaction in Preadolescent Girls and Boys: Short-Term Effects of a School-Based Program

ERIC Educational Resources Information Center

Hinz, Arnold

2017-01-01

Introduction: The aim of this study was to evaluate the school-based "My Body and I" program which was designed to help girls and boys to cope better with inevitable pubertal body changes. Method: Using a pre-post treatment-control design with 25 treatment and 17 control classes from schools in Germany and France (484 boys, 485 girls;…

Integrating to Learn and Learning to Integrate: A Case Study of an Online Master's Program on Science-Mathematics Integration for Middle School Teachers

ERIC Educational Resources Information Center

Lee, Mimi Miyoung; Chauvot, Jennifer; Plankis, Brian; Vowell, Julie; Culpepper, Shea

2011-01-01

iSMART (Integration of Science, Mathematics, and Reflective Teaching) Program is an online science and mathematics integrated graduate program for middle school teachers across the state of Texas. As part of a large design-based research project, this paper describes the initial stages of the design process of the iSMART program for its first…

Dynamic testing for shuttle design verification

NASA Technical Reports Server (NTRS)

Green, C. E.; Leadbetter, S. A.; Rheinfurth, M. H.

1972-01-01

Space shuttle design verification requires dynamic data from full scale structural component and assembly tests. Wind tunnel and other scaled model tests are also required early in the development program to support the analytical models used in design verification. Presented is a design philosophy based on mathematical modeling of the structural system strongly supported by a comprehensive test program; some of the types of required tests are outlined.

Evaluating a complex, multi-site, community-based program to improve healthcare quality: the summative research design for the Aligning Forces for Quality initiative.

PubMed

Scanlon, Dennis P; Wolf, Laura J; Alexander, Jeffrey A; Christianson, Jon B; Greene, Jessica; Jean-Jacques, Muriel; McHugh, Megan; Shi, Yunfeng; Leitzell, Brigitt; Vanderbrink, Jocelyn M

2016-08-01

The Aligning Forces for Quality (AF4Q) initiative was the Robert Wood Johnson Foundation's (RWJF's) signature effort to increase the overall quality of healthcare in targeted communities throughout the country. In addition to sponsoring this 16-site complex program, RWJF funded an independent scientific evaluation to support objective research on the initiative's effectiveness and contributions to basic knowledge in 5 core programmatic areas. The research design, data, and challenges faced during the summative evaluation phase of this near decade-long program are discussed. A descriptive overview of the summative research design and its development for a multi-site, community-based, healthcare quality improvement initiative is provided. The summative research design employed by the evaluation team is discussed. The evaluation team's summative research design involved a data-driven assessment of the effectiveness of the AF4Q program at large, assessments of the impact of AF4Q in the specific programmatic areas, and an assessment of how the AF4Q alliances were positioned for the future at the end of the program. The AF4Q initiative was the largest privately funded community-based healthcare improvement initiative in the United States to date and was implemented at a time of rapid change in national healthcare policy. The implementation of large-scale, multi-site initiatives is becoming an increasingly common approach for addressing problems in healthcare. The summative evaluation research design for the AF4Q initiative, and the lessons learned from its approach, may be valuable to others tasked with evaluating similarly complex community-based initiatives.

2017-04-28_W88 ALT 370 Program Overview(OUO).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniels, Vonceil

2017-04-01

All major program milestones have been met and the program is executing within budget. The ALT 370 program achieved Phase 6.4 authorization in February of this year. Five component Final Design Reviews (FDRs) have been completed, indicating progress in finalizing the design and development phase of the program. A series of ground-based qualification activities have demonstrated that designs are meeting functional requirements. The first fully functional flight test, FCET-53, demonstrated end-to-end performance in normal flight environments in February. Similarly, groundbased nuclear safety and hostile environments testing indicates that the design meets requirements in these stringent environments. The first in amore » series of hostile blast tests was successfully conducted in April.« less

Promising intervention strategies to reduce parents' use of physical punishment.

PubMed

Gershoff, Elizabeth T; Lee, Shawna J; Durrant, Joan E

2017-09-01

The strong and ever-growing evidence base demonstrating that physical punishment places children at risk for a range of negative outcomes, coupled with global recognition of children's inherent rights to protection and dignity, has led to the emergence of programs specifically designed to prevent physical punishment by parents. This paper describes promising programs and strategies designed for each of three levels of intervention - indicated, selective, and universal - and summarizes the existing evidence base of each. Areas for further program development and evaluation are identified. Copyright © 2017 Elsevier Ltd. All rights reserved.

Programs for analysis and resizing of complex structures. [computerized minimum weight design

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Prasad, B.

1978-01-01

The paper describes the PARS (Programs for Analysis and Resizing of Structures) system. PARS is a user oriented system of programs for the minimum weight design of structures modeled by finite elements and subject to stress, displacement, flutter and thermal constraints. The system is built around SPAR - an efficient and modular general purpose finite element program, and consists of a series of processors that communicate through the use of a data base. An efficient optimizer based on the Sequence of Unconstrained Minimization Technique (SUMT) with an extended interior penalty function and Newton's method is used. Several problems are presented for demonstration of the system capabilities.

The NASA computer aided design and test system

NASA Technical Reports Server (NTRS)

Gould, J. M.; Juergensen, K.

1973-01-01

A family of computer programs facilitating the design, layout, evaluation, and testing of digital electronic circuitry is described. CADAT (computer aided design and test system) is intended for use by NASA and its contractors and is aimed predominantly at providing cost effective microelectronic subsystems based on custom designed metal oxide semiconductor (MOS) large scale integrated circuits (LSIC's). CADAT software can be easily adopted by installations with a wide variety of computer hardware configurations. Its structure permits ease of update to more powerful component programs and to newly emerging LSIC technologies. The components of the CADAT system are described stressing the interaction of programs rather than detail of coding or algorithms. The CADAT system provides computer aids to derive and document the design intent, includes powerful automatic layout software, permits detailed geometry checks and performance simulation based on mask data, and furnishes test pattern sequences for hardware testing.

Odyssey® Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2017

2017-01-01

"Odyssey® Math" is a web-based program developed by Compass Learning® for mathematics instruction in grades K-8. The online program includes a mathematics curriculum and formative assessments designed to support differentiated and data-driven instruction. Based on assessment results, the program generates an individualized sequence of…

An Ideal Remedial Reading Program.

ERIC Educational Resources Information Center

Boettcher, Judith A.

An ideal secondary level remedial reading program would be based on the philosophy that both freedom and structure are required, that learning demands involvement and feedback, and that success breeds success. Such programs should be structured (i.e., based on clearly defined content and a clearly designated mode of presentation). There are many…

A Qualitative Study of College-Based Peace Education Programs

ERIC Educational Resources Information Center

Boudreau, Will

2017-01-01

The purpose of this exploratory research study was to examine the perceptions of seven northeast United States, college-based, Peace Education program directors regarding their respective programs' characteristics and the challenges they face. This qualitative study was designed to fill a gap in the literature by examining the perceptions of…

78 FR 5459 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding... CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those for CAHPS... 26, 2013. ADDRESSES: In responding to this solicitation, please reply via email to AmbSurgSurvey@cms...

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

A Program Based on Task-Based Teaching Approach to Develop Creative Thinking Teaching Skills for Female Science Teachers in Kingdom of Saudi Arabia (KSA)

ERIC Educational Resources Information Center

Ibrahim, Manal Hassan Mohammed Bin

2015-01-01

This study aimed at developing creative thinking teaching skills for female science teachers in Kingdom of Saudi Arabia (KSA) through designing a program based on task-based teaching approach. The problem of the study was specified as the weakness of creative thinking teaching skills for science teachers in KSA and the need for programs based on…

Core Professionalism Education in Surgery: A Systematic Review

PubMed Central

Sarıoğlu Büke, Akile; Karabilgin Öztürkçü, Özlem Sürel; Yılmaz, Yusuf; Sayek, İskender

2018-01-01

Background: Professionalism education is one of the major elements of surgical residency education. Aims: To evaluate the studies on core professionalism education programs in surgical professionalism education. Study Design: Systematic review. Methods: This systematic literature review was performed to analyze core professionalism programs for surgical residency education published in English with at least three of the following features: program developmental model/instructional design method, aims and competencies, methods of teaching, methods of assessment, and program evaluation model or method. A total of 27083 articles were retrieved using EBSCOHOST, PubMed, Science Direct, Web of Science, and manual search. Results: Eight articles met the selection criteria. The instructional design method was presented in only one article, which described the Analysis, Design, Development, Implementation, and Evaluation model. Six articles were based on the Accreditation Council for Graduate Medical Education criterion, although there was significant variability in content. The most common teaching method was role modeling with scenario- and case-based learning. A wide range of assessment methods for evaluating professionalism education were reported. The Kirkpatrick model was reported in one article as a method for program evaluation. Conclusion: It is suggested that for a core surgical professionalism education program, developmental/instructional design model, aims and competencies, content, teaching methods, assessment methods, and program evaluation methods/models should be well defined, and the content should be comparable. PMID:29553464

Fostering Healthy Futures for Teens: Adaptation of an Evidence-Based Program

PubMed Central

Taussig, Heather; Weiler, Lindsey; Rhodes, Tara; Hambrick, Erin; Wertheimer, Robyn; Fireman, Orah; Combs, Melody

2015-01-01

Objective This article describes the process of adapting and implementing a complex, multicomponent intervention for a new population. Specifically, the article delineates the development and implementation of the Fostering Healthy Futures for Teens (FHF-T) program, which is an adaptation and extension of the Fostering Healthy Futures® (FHF) preventive intervention. FHF is a 9-month mentoring and skills group program for 9 to 11 year olds recently placed in foster care. Following the designation of FHF as an evidence-based intervention, there was increasing demand for the program. However, the narrow population for which FHF had demonstrated efficacy limited broader implementation of the existing intervention. FHF-T was designed to extend the reach of the program by adapting the FHF intervention for adolescents in the early years of high school who have a history of out-of-home care. Specifically, this adaptation recognizes key developmental differences between preadolescent and adolescent populations. Method After designing a program model and adapting the program components, the FHF-T mentoring program was implemented with 42 youth over 2 program years. Results Of the teens who were offered the program, 75% chose to enroll, and 88% of those graduated 9 months later. Although the program evidenced high rates of uptake and participant satisfaction, some unexpected challenges were encountered that will need to be addressed in future iterations of the program. Conclusions Too often program adaptations are made without careful consideration of important contextual issues, and too infrequently, these adapted programs are studied. Our process of program adaptation with rigorous measurement of program implementation provides a useful model for other evidence-based programs seeking thoughtful adaptation. PMID:27019678

Space Tethers Design Criteria

NASA Technical Reports Server (NTRS)

Tomlin, Donald D.; Faile, Gwyn C.; Hayashida, Kazuo B.; Frost, Cynthia L.; Wagner, Carole Y.; Mitchell, Michael L.; Vaughn, Jason A.; Galuska, Michael J.

1998-01-01

The small expendable deployable system and tether satellite system programs did not have a uniform written criteria for tethers. The JSC safety panel asked what criteria was used to design the tethers. Since none existed, a criteria was written based on past experience for future tether programs.

Accelerated test design

NASA Technical Reports Server (NTRS)

Mcdermott, P. P.

1980-01-01

The design of an accelerated life test program for electric batteries is discussed. A number of observations and suggestions on the procedures and objectives for conducting an accelerated life test program are presented. Equations based on nonlinear regression analysis for predicting the accelerated life test parameters are discussed.

Childhood Obesity: Concept, Feasibility, and Interim Results of a Local Group-Based, Long-Term Treatment Program

ERIC Educational Resources Information Center

Weigel, Corina; Kokocinski, Kathrin; Lederer, Peter; Dotsch, Jorg; Rascher, Wolfgang; Knerr, Ina

2008-01-01

Objective: The authors performed a group-based program for obese children and adolescents in Bavaria, Germany to enable them to establish a health-oriented lifestyle and to reduce overweight. The authors compared this program with a control approach based on the patients' own initiative. Design: This is a controlled clinical trial. Setting: A…

Final Accumulative Results & Transfer of Knowledge of the Arizona Career Ladder Research & Evaluation Project: Impact on Student Achievement, Formulated Models, Network Anecdotes, & Recommendations to the Legislature for Policy Development, Program Continuation & State-Wide Expansion. Summative Report VIII.

ERIC Educational Resources Information Center

Packard, Richard D.; Dereshiwsky, Mary I.

This paper presents research findings concerning the Career Ladder pilot test program in Arizona. The program is designed to reward and motivate teachers based on performance. One of the program's key features is the flexibility and innovation allowed to participating districts in their individual development of program designs and structures. An…

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD)

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Calvery, A. L.; Davis, D. A.; Dickmann, L.; Folger, D. H.; Jochem, E. N.; Kitto, C. M.; Vonlimbach, G.

1977-01-01

Integrated Programs for Aerospace Vehicle Design (IPAD) system design requirements are given. The information is based on the IPAD User Requirements Document (D6-IPAD-70013-D) and the Integrated Information Processing Requirements Document (D6-IPAD-70012-D). General information about IPAD and a list of the system design requirements that are to be satisfied by the IPAD system are given. The system design requirements definition is to be considered as a baseline definition of the IPAD system design requirements.

Computer aided fixture design - A case based approach

NASA Astrophysics Data System (ADS)

Tanji, Shekhar; Raiker, Saiesh; Mathew, Arun Tom

2017-11-01

Automated fixture design plays important role in process planning and integration of CAD and CAM. An automated fixture setup design system is developed where when fixturing surfaces and points are described allowing modular fixture components to get automatically select for generating fixture units and placed into position with satisfying assembled conditions. In past, various knowledge based system have been developed to implement CAFD in practice. In this paper, to obtain an acceptable automated machining fixture design, a case-based reasoning method with developed retrieval system is proposed. Visual Basic (VB) programming language is used in integrating with SolidWorks API (Application programming interface) module for better retrieval procedure reducing computational time. These properties are incorporated in numerical simulation to determine the best fit for practical use.

A Prevention Program for Preschool C.O.A.s: Design and Early Effects.

ERIC Educational Resources Information Center

Zucker, Robert A.; And Others

This report addresses three levels of questions about the effectiveness of the Michigan State University Multiple Risk Outreach Program (MROP). The MROP was designed to recruit families from this high-risk population and test the implementation of an intervention protocol in a population-based program for 3- to 6-year-olds and their families. This…

Evaluation of Achieving a College Education Plus: A Credit-Based Transition Program

ERIC Educational Resources Information Center

Luna, Gaye; Fowler, Michael

2011-01-01

This ex post facto study evaluated Achieving a College Education (ACE) Plus program, a credit-based transition program between a high school district and a community college. Achieving a College Education Plus is an early outreach program. It is designed to aid at-risk students in graduating from high school and making a smooth transition to…

A Case Study of Culturally Relevant School-Based Programming for First Nations Youth: Improved Relationships, Confidence and Leadership, and School Success

ERIC Educational Resources Information Center

Crooks, Claire V.; Burleigh, Dawn; Snowshoe, Angela; Lapp, Andrea; Hughes, Ray; Sisco, Ashley

2015-01-01

Schools are expected to promote social and emotional learning skills among youth; however, there is a lack of culturally-relevant programming available. The Fourth R: Uniting Our Nations programs for Aboriginal youth include strengths-based programs designed to promote healthy relationships and cultural connectedness, and improve school success…

Economic-Analysis Program for a Communication System

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1986-01-01

Prices and profits of alternative designs compared. Objective of Land Mobile Satellite Service Finance Report (LMSS) program is to provide means for comparing alternative designs of LMSS systems. Program is Multiplan worksheet program. Labels used in worksheet chosen for satellite-based cellular communication service, but analysis not restricted to such cases. LMSS written for interactive execution with Multiplan (version 1.2) and implemented on IBM PC series computer operating under DOS (version 2.11).

A Java-based enterprise system architecture for implementing a continuously supported and entirely Web-based exercise solution.

PubMed

Wang, Zhihui; Kiryu, Tohru

2006-04-01

Since machine-based exercise still uses local facilities, it is affected by time and place. We designed a web-based system architecture based on the Java 2 Enterprise Edition that can accomplish continuously supported machine-based exercise. In this system, exercise programs and machines are loosely coupled and dynamically integrated on the site of exercise via the Internet. We then extended the conventional health promotion model, which contains three types of players (users, exercise trainers, and manufacturers), by adding a new player: exercise program creators. Moreover, we developed a self-describing strategy to accommodate a variety of exercise programs and provide ease of use to users on the web. We illustrate our novel design with examples taken from our feasibility study on a web-based cycle ergometer exercise system. A biosignal-based workload control approach was introduced to ensure that users performed appropriate exercise alone.

Hydrazine Gas Generator Program. [space shuttles

NASA Technical Reports Server (NTRS)

Kusak, L.; Marcy, R. D.

1975-01-01

The design and fabrication of a flight gas generator for the space shuttle were investigated. Critical performance parameters and stability criteria were evaluated as well as a scaling laws that could be applied in designing the flight gas generator. A test program to provide the necessary design information was included. A structural design, including thermal and stress analysis, and two gas generators were fabricated based on the results. Conclusions are presented.

Drawing/Writing: A Brain Research-Based Writing Program Designed to Develop Descriptive, Analytical and Inferential Thinking Skills at the Elementary School Level

ERIC Educational Resources Information Center

Sheridan, Susan Rich

1990-01-01

The research and the study focus on the problem of dissociated learning. Why do students fail to connect with knowledge? The purposes of the study are: to summarize research pertaining to brain growth; to describe educational approaches and tactics consistent with this research; to test a brain research-based program designed to connect children…

Marketing and Distributive Education. Community/Work-Based Programs. An Instructor's Guide to Program Strategies. Cooperative Vocational Education; Vocational Work Experience Education; Community Classroom.

ERIC Educational Resources Information Center

Holzkamper, Charlot

Designed for use in high school and adult education programs, this manual was developed to help marketing and distributive education teachers to develop or upgrade community/work-based programs; and to assist teachers who operate these programs to use legal operational practices and to meet the occupational needs of their students and communities.…

[Development and effect of a web-based child health care program for the staff at child daycare centers].

PubMed

Kim, Ji Soo

2010-04-01

The purpose of the study is to develop a web-based program on child health care, and to identify the effect of the program on knowledge of, attitudes towards child health care, and health care practice in staff of daycare centers. The program was developed through the processes of needs analysis, contents construction, design, development, and evaluation. After the program was developed, it was revised through feedback from 30 experts. To identify the effect of developed program, onegroup pretest-posttest design study was conducted with 64 staff members from 12 daycare centers in Korea. The program was developed based on users' needs and consisted of five parts: health promotion, disease and symptoms management, oral health, injury and safety, sheets and forms. This study showed that the total score of staff who used the program was significantly higher in terms of knowledge, attitudes, and their health care practice compared with pretest score (p<.05). These results suggest that this Web-based program can contribute to the child health promotion as well as can provide the staff with the insightful child health information. Therefore, it is expected that this program will be applied to staff of other child care settings for children's health.

Ceramic applications in turbine engines

NASA Technical Reports Server (NTRS)

Helms, H. E.; Heitman, P. W.; Lindgren, L. C.; Thrasher, S. R.

1984-01-01

The application of ceramic components to demonstrate improved cycle efficiency by raising the operating temperature of the existing Allison IGI 404 vehicular gas turbine engine is discussed. This effort was called the Ceramic Applications in Turbine Engines (CATE) program and has successfully demonstrated ceramic components. Among these components are two design configurations featuring stationary and rotating caramic components in the IGT 404 engine. A complete discussion of all phases of the program, design, materials development, fabrication of ceramic components, and testing-including rig, engine, and vehicle demonstation test are presented. During the CATE program, a ceramic technology base was established that is now being applied to automotive and other gas turbine engine programs. This technology base is outlined and also provides a description of the CATE program accomplishments.

An analytical procedure and automated computer code used to design model nozzles which meet MSFC base pressure similarity parameter criteria. [space shuttle

NASA Technical Reports Server (NTRS)

Sulyma, P. R.

1980-01-01

Fundamental equations and similarity definition and application are described as well as the computational steps of a computer program developed to design model nozzles for wind tunnel tests conducted to define power-on aerodynamic characteristics of the space shuttle over a range of ascent trajectory conditions. The computer code capabilities, a user's guide for the model nozzle design program, and the output format are examined. A program listing is included.

OCP TECD Report - TARDEC Blast Mitigation Program (BMP) and National Defense Industrial Association (NDIA) Michigan (MI) Chapter Cooperative Research and Development Agreement (CRADA) Summary

DTIC Science & Technology

2017-09-26

on the desire of both parties to collaborate to develop a practical and useable set of Blast Mitigation Program (BMP) design guidelines and...standards. The effort focused on the following topics: occupant-centric design philosophy and terms, test procedures, Military performance specifications...NDIA) was created based on the desire of both parties to collaborate to develop a practical and useable set of Blast Mitigation Program (BMP) design

Space shuttle recommendations based on aircraft maintenance experience

NASA Technical Reports Server (NTRS)

Spears, J. M.; Fox, C. L.

1972-01-01

Space shuttle design recommendations based on aircraft maintenance experience are developed. The recommendations are specifically applied to the landing gear system, nondestructive inspection techniques, hydraulic system design, materials and processes, and program support.

AVID - A design system for technology studies of advanced transportation concepts. [Aerospace Vehicle Interactive Design

NASA Technical Reports Server (NTRS)

Wilhite, A. W.; Rehder, J. J.

1979-01-01

The basic AVID (Aerospace Vehicle Interactive Design) is a general system for conceptual and preliminary design currently being applied to a broad range of future space transportation and spacecraft vehicle concepts. AVID hardware includes a minicomputer allowing rapid designer interaction. AVID software includes (1) an executive program and communication data base which provide the automated capability to couple individual programs, either individually in an interactive mode or chained together in an automatic sequence mode; and (2) the individual technology and utility programs which provide analysis capability in areas such as graphics, aerodynamics, propulsion, flight performance, weights, sizing, and costs.

Core Professionalism Education in Surgery: A Systematic Review.

PubMed

Sarıoğlu Büke, Akile; Karabilgin Öztürkçü, Özlem Sürel; Yılmaz, Yusuf; Sayek, İskender

2018-03-15

Professionalism education is one of the major elements of surgical residency education. To evaluate the studies on core professionalism education programs in surgical professionalism education. Systematic review. This systematic literature review was performed to analyze core professionalism programs for surgical residency education published in English with at least three of the following features: program developmental model/instructional design method, aims and competencies, methods of teaching, methods of assessment, and program evaluation model or method. A total of 27083 articles were retrieved using EBSCOHOST, PubMed, Science Direct, Web of Science, and manual search. Eight articles met the selection criteria. The instructional design method was presented in only one article, which described the Analysis, Design, Development, Implementation, and Evaluation model. Six articles were based on the Accreditation Council for Graduate Medical Education criterion, although there was significant variability in content. The most common teaching method was role modeling with scenario- and case-based learning. A wide range of assessment methods for evaluating professionalism education were reported. The Kirkpatrick model was reported in one article as a method for program evaluation. It is suggested that for a core surgical professionalism education program, developmental/instructional design model, aims and competencies, content, teaching methods, assessment methods, and program evaluation methods/models should be well defined, and the content should be comparable.

A public health decision support system model using reasoning methods.

PubMed

Mera, Maritza; González, Carolina; Blobel, Bernd

2015-01-01

Public health programs must be based on the real health needs of the population. However, the design of efficient and effective public health programs is subject to availability of information that can allow users to identify, at the right time, the health issues that require special attention. The objective of this paper is to propose a case-based reasoning model for the support of decision-making in public health. The model integrates a decision-making process and case-based reasoning, reusing past experiences for promptly identifying new population health priorities. A prototype implementation of the model was performed, deploying the case-based reasoning framework jColibri. The proposed model contributes to solve problems found today when designing public health programs in Colombia. Current programs are developed under uncertain environments, as the underlying analyses are carried out on the basis of outdated and unreliable data.

The Design and Implementation of a Physical Education Program to Promote Children's Creativity in the Early Years

ERIC Educational Resources Information Center

Zachopoulou, Evridiki; Trevlas, Efthimios; Konstadinidou, Elisavet

2006-01-01

The purpose of this study was to design and implement a physical education program to promote creativity in preschool children. The study was based on the following phases: (a) to design and formulate 20 physical education lessons in order to provide children with opportunities to develop their creative thinking through the use of movement…

Designing Tools for Reflection on Problem-Based Instruction and Problem-Based Instructional Design

ERIC Educational Resources Information Center

Keefer, Matthew W.; Hui, Diane; RuffusDoerr, Amy Marie

2009-01-01

The objective of this research project into teacher education was to document the collaborative development and refection on teachers' tools in a problem-based learning (PBL) program. These results were then used to design materials and formats for the transmission of this teaching knowledge to less-experienced PBL teachers. The tools were…

Computer Programming Games and Gender Oriented Cultural Forms

NASA Astrophysics Data System (ADS)

AlSulaiman, Sarah Abdulmalik

I present the design and evaluation of two games designed to help elementary and middle school students learn computer programming concepts. The first game was designed to be "gender neutral", aligning with might be described as a consensus opinion on best practices for computational learning environments. The second game, based on the cultural form of dress up dolls was deliberately designed to appeal to females. I recruited 70 participants in an international two-phase study to investigate the relationship between games, gender, attitudes towards computer programming, and learning. My findings suggest that while the two games were equally effective in terms of learning outcomes, I saw differences in motivation between players of the two games. Specifically, participants who reported a preference for female- oriented games were more motivated to learn about computer programming when they played a game that they perceived as designed for females. In addition, I describe how the two games seemed to encourage different types of social activity between players in a classroom setting. Based on these results, I reflect on the strategy of exclusively designing games and activities as "gender neutral", and suggest that employing cultural forms, including gendered ones, may help create a more productive experience for learners.

Friendship Experiences of Participants in a University Based Transition Program

ERIC Educational Resources Information Center

Nasr, Maya; Cranston-Gingras, Ann; Jang, Seung-Eun

2015-01-01

This study examined the nature of friendships of 14 students with intellectual and developmental disabilities participating in a university-based transition program in the United States. The transition program is a bridge between high school and adulthood, designed to foster students' self-esteem and self-confidence by providing them with training…

Using EPAS[TM] to Evaluate School-Based Intervention Programs: GEAR UP. Case Study

ERIC Educational Resources Information Center

ACT, Inc., 2007

2007-01-01

This brief examines how the ACT's EPAS[TM] (Educational Planning and Assessment System) can be used to evaluate school-based intervention programs. Specific evaluation considered is that of the federal government's Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP), an initiative designed to increase the college awareness…

Supporting Universal Prevention Programs: A Two-Phased Coaching Model

ERIC Educational Resources Information Center

Becker, Kimberly D.; Darney, Dana; Domitrovich, Celene; Keperling, Jennifer Pitchford; Ialongo, Nicholas S.

2013-01-01

Schools are adopting evidence-based programs designed to enhance students' emotional and behavioral competencies at increasing rates (Hemmeter et al. in "Early Child Res Q" 26:96-109, 2011). At the same time, teachers express the need for increased support surrounding implementation of these evidence-based programs (Carter and Van Norman in "Early…

Bringing Evidence-Based Sexual Health Programs to Adolescents in Black Churches: Applying Knowledge from Systematic Adaptation Frameworks

ERIC Educational Resources Information Center

Weeks, Fiona H.; Powell, Terrinieka W.; Illangasekare, Samantha; Rice, Eric; Wilson, James; Hickman, Debra; Blum, Robert W.

2016-01-01

Previous studies have documented Black churches' receptivity to implementing adolescent sexual health programs within their congregations. Some authors have argued for new sexual health programs to be designed specifically for churches, similar to the development of school- and community-based interventions. However, strategies and curricula used…

A Community-Based Early Intervention Program for Toddlers with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Rollins, Pamela Rosenthal; Campbell, Michelle; Hoffman, Renee Thibodeau; Self, Kayli

2016-01-01

This study examined Pathways Early Autism Intervention, a community-based, parent-mediated, intensive behavioral and developmental intervention program for children with autism spectrum disorders that could be used as a model for state-funded early intervention programs. A single-subject, multiple-baseline, across-participants design was used.…

Program Design for Retrospective Searches on Large Data Bases

ERIC Educational Resources Information Center

Thiel, L. H.; Heaps, H. S.

1972-01-01

Retrospective search of large data bases requires development of special techniques for automatic compression of data and minimization of the number of input-output operations to the computer files. The computer program should require a relatively small amount of internal memory. This paper describes the structure of such a program. (9 references)…

SLS Model Based Design: A Navigation Perspective

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Anzalone, Evan; Park, Thomas; Geohagan, Kevin

2018-01-01

The SLS Program has implemented a Model-based Design (MBD) and Model-based Requirements approach for managing component design information and system requirements. This approach differs from previous large-scale design efforts at Marshall Space Flight Center where design documentation alone conveyed information required for vehicle design and analysis and where extensive requirements sets were used to scope and constrain the design. The SLS Navigation Team is responsible for the Program-controlled Design Math Models (DMMs) which describe and represent the performance of the Inertial Navigation System (INS) and the Rate Gyro Assemblies (RGAs) used by Guidance, Navigation, and Controls (GN&C). The SLS Navigation Team is also responsible for navigation algorithms. The navigation algorithms are delivered for implementation on the flight hardware as a DMM. For the SLS Block 1B design, the additional GPS Receiver hardware model is managed as a DMM at the vehicle design level. This paper describes the models, and discusses the processes and methods used to engineer, design, and coordinate engineering trades and performance assessments using SLS practices as applied to the GN&C system, with a particular focus on the navigation components.

Competency-Based Adult Education: Florida Model.

ERIC Educational Resources Information Center

Singer, Elizabeth

This compilation of program materials serves as an introduction to Florida's Brevard Community College's (BCC's) Competency-Based Adult High School Completion Project, a multi-year project designed to teach adult administrators, counselors, and teachers how to organize and implement a competency-based adult education (CBAE) program; to critique…

Does Participation in a Computer-Based Learning Program in Introductory Financial Accounting Course Lead to Choosing Accounting as a Major?

ERIC Educational Resources Information Center

Owhoso, Vincent; Malgwi, Charles A.; Akpomi, Margaret

2014-01-01

The authors examine whether students who completed a computer-based intervention program, designed to help them develop abilities and skills in introductory accounting, later declared accounting as a major. A sample of 1,341 students participated in the study, of which 74 completed the intervention program (computer-based assisted learning [CBAL])…

Design and Methods of a Synchronous Online Motivational Interviewing Intervention for Weight Management

PubMed Central

DiLillo, Vicki; Ingle, Krista; Harvey, Jean Ruth; West, Delia Smith

2016-01-01

Background While Internet-based weight management programs can facilitate access to and engagement in evidence-based lifestyle weight loss programs, the results have generally not been as effective as in-person programs. Furthermore, motivational interviewing (MI) has shown promise as a technique for enhancing weight loss outcomes within face-to-face programs. Objective This paper describes the design, intervention development, and analysis of a therapist-delivered online MI intervention for weight loss in the context of an online weight loss program. Methods The MI intervention is delivered within the context of a randomized controlled trial examining the efficacy of an 18-month, group-based, online behavioral weight control program plus individually administered, synchronous online MI sessions relative to the group-based program alone. Six individual 30-minute MI sessions are conducted in private chat rooms over 18 months by doctoral-level psychologists. Sessions use a semistructured interview format for content and session flow and incorporate core MI components (eg, collaborative agenda setting, open-ended questions, reflective listening and summary statements, objective data, and a focus on evoking and amplifying change talk). Results The project was funded in 2010 and enrollment was completed in 2012. Data analysis is currently under way and the first results are expected in 2016. Conclusions This is the first trial to test the efficacy of a synchronous online, one-on-one MI intervention designed to augment an online group behavioral weight loss program. If the addition of MI sessions proves to be successful, this intervention could be disseminated to enhance other distance-based weight loss interventions. Trial Registration Clinicaltrials.gov NCT01232699; https://clinicaltrials.gov/ct2/show/NCT01232699 PMID:27095604

The Environment for Application Software Integration and Execution (EASIE) version 1.0. Volume 1: Executive overview

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Davis, John S.

1989-01-01

The Environment for Application Software Integration and Execution (EASIE) provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational database management system. Volume 1, Executive Overview, gives an overview of the functions provided by EASIE and describes their use. Three operational design systems based upon the EASIE software are briefly described.

Web-Based Smoking-Cessation Program

PubMed Central

Strecher, Victor J.; McClure, Jennifer B.; Alexander, Gwen L.; Chakraborty, Bibhas; Nair, Vijay N.; Konkel, Janine M.; Greene, Sarah M.; Collins, Linda M.; Carlier, Carola C.; Wiese, Cheryl J.; Little, Roderick J.; Pomerleau, Cynthia S.; Pomerleau, Ovide F.

2009-01-01

Background Initial trials of web-based smoking-cessation programs have generally been promising. The active components of these programs, however, are not well understood. This study aimed to (1) identify active psychosocial and communication components of a web-based smoking-cessation intervention and (2) examine the impact of increasing the tailoring depth on smoking cessation. Design Randomized fractional factorial design. Setting Two HMOs: Group Health in Washington State and Henry Ford Health System in Michigan. Participants 1866 smokers. Intervention A web-based smoking-cessation program plus nicotine patch. Five components of the intervention were randomized using a fractional factorial design: high- versus low-depth tailored success story, outcome expectation, and efficacy expectation messages; high- versus low-personalized source; and multiple versus single exposure to the intervention components. Measurements Primary outcome was 7 day point-prevalence abstinence at the 6-month follow-up. Findings Abstinence was most influenced by high-depth tailored success stories and a high-personalized message source. The cumulative assignment of the three tailoring depth factors also resulted in increasing the rates of 6-month cessation, demonstrating an effect of tailoring depth. Conclusions The study identified relevant components of smoking-cessation interventions that should be generalizable to other cessation interventions. The study also demonstrated the importance of higher-depth tailoring in smoking-cessation programs. Finally, the use of a novel fractional factorial design allowed efficient examination of the study aims. The rapidly changing interfaces, software, and capabilities of eHealth are likely to require such dynamic experimental approaches to intervention discovery. PMID:18407003

The engineering design integration (EDIN) system. [digital computer program complex

NASA Technical Reports Server (NTRS)

Glatt, C. R.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Reiners, S. J.

1974-01-01

A digital computer program complex for the evaluation of aerospace vehicle preliminary designs is described. The system consists of a Univac 1100 series computer and peripherals using the Exec 8 operating system, a set of demand access terminals of the alphanumeric and graphics types, and a library of independent computer programs. Modification of the partial run streams, data base maintenance and construction, and control of program sequencing are provided by a data manipulation program called the DLG processor. The executive control of library program execution is performed by the Univac Exec 8 operating system through a user established run stream. A combination of demand and batch operations is employed in the evaluation of preliminary designs. Applications accomplished with the EDIN system are described.

Universal Instructional Design as a Model for Educational Programs

ERIC Educational Resources Information Center

Higbee, Jeanne L.

2007-01-01

This article describes Universal Instructional Design as an inclusive pedagogical model for use in educational programs, whether provided by traditional educational institutions, community-based initiatives, or workplace literacy projects. For the benefit of public relations specialists and classroom educators alike, the article begins with a…

Improved design for driven piles based on a pile load test program in Illinois : phase 2.

DOT National Transportation Integrated Search

2014-09-01

A dynamic load test program consisting of 38 sites and 111 piles with restrikes was conducted throughout Illinois : to improve the Illinois Department of Transportation design of driven piling. Pile types included steel H-piles and : closed-ended pip...

Medicinal Chemistry Projects Requiring Imaginative Structure-Based Drug Design Methods.

PubMed

Moitessier, Nicolas; Pottel, Joshua; Therrien, Eric; Englebienne, Pablo; Liu, Zhaomin; Tomberg, Anna; Corbeil, Christopher R

2016-09-20

Computational methods for docking small molecules to proteins are prominent in drug discovery. There are hundreds, if not thousands, of documented examples-and several pertinent cases within our research program. Fifteen years ago, our first docking-guided drug design project yielded nanomolar metalloproteinase inhibitors and illustrated the potential of structure-based drug design. Subsequent applications of docking programs to the design of integrin antagonists, BACE-1 inhibitors, and aminoglycosides binding to bacterial RNA demonstrated that available docking programs needed significant improvement. At that time, docking programs primarily considered flexible ligands and rigid proteins. We demonstrated that accounting for protein flexibility, employing displaceable water molecules, and using ligand-based pharmacophores improved the docking accuracy of existing methods-enabling the design of bioactive molecules. The success prompted the development of our own program, Fitted, implementing all of these aspects. The primary motivation has always been to respond to the needs of drug design studies; the majority of the concepts behind the evolution of Fitted are rooted in medicinal chemistry projects and collaborations. Several examples follow: (1) Searching for HDAC inhibitors led us to develop methods considering drug-zinc coordination and its effect on the pKa of surrounding residues. (2) Targeting covalent prolyl oligopeptidase (POP) inhibitors prompted an update to Fitted to identify reactive groups and form bonds with a given residue (e.g., a catalytic residue) when the geometry allows it. Fitted-the first fully automated covalent docking program-was successfully applied to the discovery of four new classes of covalent POP inhibitors. As a result, efficient stereoselective syntheses of a few screening hits were prioritized rather than synthesizing large chemical libraries-yielding nanomolar inhibitors. (3) In order to study the metabolism of POP inhibitors by cytochrome P450 enzymes (CYPs)-for toxicology studies-the program Impacts was derived from Fitted and helped us to reveal a complex metabolism with unforeseen stereocenter isomerizations. These efforts, combined with those of other docking software developers, have strengthened our understanding of the complex drug-protein binding process while providing the medicinal chemistry community with useful tools that have led to drug discoveries. In this Account, we describe our contributions over the past 15 years-within their historical context-to the design of drug candidates, including BACE-1 inhibitors, POP covalent inhibitors, G-quadruplex binders, and aminoglycosides binding to nucleic acids. We also remark the necessary developments of docking programs, specifically Fitted, that enabled structure-based design to flourish and yielded multiple fruitful, rational medicinal chemistry campaigns.

[Effects of a Mobile Web-based Pregnancy Health Care Educational Program for Mothers at an Advanced Maternal Age].

PubMed

Wang, Hee Jung; Kim, Il Ok

2015-06-01

This study was conducted to develop a mobile web-based pregnancy health care educational program for mothers who were at an advanced maternal age (AMA) and to verify the effects of the program on pregnancy health care. This program was developed using a web-based teaching-learning system design model and composed of 10 subject areas. This research was a quasi-experimental study using a non-equivalent control group pretest-posttest time serial design and data were collected from April 2 to May 3, 2014. To verify the effects of the program, it was used for 2 weeks with 30 AMA mothers (experimental group). For the control group, a classroom education booklet for pregnant women used with 31 AMA mothers. The experimental group having participated in program had statistically significantly higher scores for knowledge (t=3.76, p<.001), self-efficacy (t=8.54, p<.001), and practice behavior (t=4.88, p<.001) of pregnancy health care, compared to the control group. The results of the program indicate that a Mobile web-based pregnancy health care educational program is effective in meeting the needs of AMA mothers and can be used as the prenatal educational program for AMA mothers and is appropriate as an educational media for theses mothers.

Program director and resident perspectives of a competency-based medical education anesthesia residency program in Canada: a needs assessment

PubMed Central

2016-01-01

Purpose: In July 2015, the University of Ottawa introduced a competency-based medical education (CBME) postgraduate program for anesthesia. Prior to program implementation, this study aimed to identify Canadian anesthesiology program directors perceptions of CBME and residents’ opinion on how the program should be designed and perceived consequences of CBME. Methods: This two-phase, qualitative study included semi-structured interviews with Canadian anesthesia program directors (Phase I) and a focus group interview with residents enrolled in the University of Ottawa time-based anesthesia program (Phase II). Both phases sought to gauge participant’s perceptions of CBME. Interviews were recorded, transcribed verbatim and thematically analyzed. Results: Data was combined to protect anonymity of the six participants (three program directors and three residents). Participants spoke about the perceived advantages of CBME, the need to establish definitions, and challenges to a CBME program highlighting logistical factors, implications for trainees and the role assessment plays in CBME. Conclusion: These findings will inform CBME implementation strategies in anesthesia programs across the country, and may assist other residency programs in the design of their programs. Furthermore, our findings may help identify potential challenges and issues that other postgraduate specialties may face as they transition to a CBME model. PMID:26913772

Office Systems Technology Associate Degree. Louisiana Technical Education Program and Course Standards. Competency-Based Postsecondary Curriculum Outline from Bulletin 1822.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document outlines the curriculum of Louisiana's office systems technology associate degree program, which is a 6-term (75-credit hour) competency-based program designed to prepare students for employment as special assistants for business executives and top management. Presented first are a description of the program and a list of the general…

A Computer Based Education (CBE) Program for Middle School Mathematics Intervention

ERIC Educational Resources Information Center

Gulley, Bill

2009-01-01

A Computer Based Education (CBE) program for intervention mathematics was developed, used, and modified over a period of three years in a computer lab at an Arizona Title I middle school. The program is described along with a rationale for the need, design, and use of such a program. Data was collected in the third year and results of the program…

Natural environment application for NASP-X-30 design and mission planning

NASA Technical Reports Server (NTRS)

Johnson, D. L.; Hill, C. K.; Brown, S. C.; Batts, G. W.

1993-01-01

The NASA/MSFC Mission Analysis Program has recently been utilized in various National Aero-Space Plane (NASP) mission and operational planning scenarios. This paper focuses on presenting various atmospheric constraint statistics based on assumed NASP mission phases using established natural environment design, parametric, threshold values. Probabilities of no-go are calculated using atmospheric parameters such as temperature, humidity, density altitude, peak/steady-state winds, cloud cover/ceiling, thunderstorms, and precipitation. The program although developed to evaluate test or operational missions after flight constraints have been established, can provide valuable information in the design phase of the NASP X-30 program. Inputting the design values as flight constraints the Mission Analysis Program returns the probability of no-go, or launch delay, by hour by month. This output tells the X-30 program manager whether the design values are stringent enough to meet his required test flight schedules.

Problem Implementation as a Lever for Change: An Experimental Study of the Effects of a Professional Development Program on Students' Mathematics Learning

ERIC Educational Resources Information Center

Santagata, Rossella; Kersting, Nicole; Givvin, Karen B.; Stigler, James W.

2011-01-01

This study investigates, through an experimental design, the effectiveness of a professional development program on teacher knowledge and practices and on student learning. The program consisted of a series of video-based modules designed to respond to needs of U.S. teachers, as highlighted by findings from the 1999 Third International Mathematics…

School Age Child Care: Common Issues in Program Design and Evaluation with Annotated Bibliography. Australian Early Childhood Resource Booklets No. 2.

ERIC Educational Resources Information Center

Piscitelli, Barbara

Noting an increase in demand for school-age child care offerings, with no corresponding establishment of guidelines for program development, this booklet addresses design and evaluation issues in school age child care (SACC) in Australia. The booklet is largely based on two surveys of SACC programs conducted in 1986. The issues discussed in the…

Using a Moodle-Based Professional Development Program to Train Science Teachers to Teach for Creativity and Its Effectiveness on Their Teaching Practices

ERIC Educational Resources Information Center

Al-Balushi, Sulaiman M.; Al-Abdali, Nasser S.

2015-01-01

This study describes a distance learning professional development program that we designed for the purpose of training science teachers to teach for creativity. The Moodle platform was used to host the training. To ensure that trainees would benefit from this distance learning program, we designed the instructional activities according to the…

The Development and Evaluation of a Computer-Based System for Managing the Design and Pilot-Testing of Interactive Videodisc Programs. Training and Development Research Center, Project Number Forty-Three.

ERIC Educational Resources Information Center

Sayre, Scott Alan

The purpose of this study was to develop and validate a computer-based system that would allow interactive video developers to integrate and manage the design components prior to production. These components of an interactive video (IVD) program include visual information in a variety of formats, audio information, and instructional techniques,…

The Effect of a Computer Program Based on Analysis, Design, Development, Implementation and Evaluation (ADDIE) in Improving Ninth Graders' Listening and Reading Comprehension Skills in English in Jordan

ERIC Educational Resources Information Center

Alodwan, Talal; Almosa, Mosaab

2018-01-01

The study aimed to assess the effectiveness of a computer program based on Analysis, Design, Development, Implementation and Evaluation (ADDIE) Model on the achievement of Ninth Graders' listening and Reading Comprehension Skills in English. The study sample comprised 70 ninth graders during the second semester of the academic year 2016/2017. The…

The Effect of Lego Mindstorms Ev3 Based Design Activities on Students' Attitudes towards Learning Computer Programming, Self-Efficacy Beliefs and Levels of Academic Achievement

ERIC Educational Resources Information Center

Korkmaz, Özgen

2016-01-01

The aim of the study was to present the effect of Lego Mindstorms Ev3 based design activities on students' attitudes towards learning computer programming, self-efficacy beliefs and levels of academic achievement. The research is a pretest-posttest with control group semi-experimental study. The study group of the research consisted of 53 students…

Development of a community cancer education program: the Forsyth County, NC cervical cancer prevention project.

PubMed

Michielutte, R; Dignan, M B; Wells, H B; Young, L D; Jackson, D S; Sharp, P C

1989-01-01

The authors outline the development and implementation of a public health education program for cervical cancer screening among black women in Forsyth County, NC. The educational program includes distributing electronic and printed information media messages, a program of direct education for women, and providing information on current issues in cervical screening to primary-care physicians. Program development was based on social marketing principles, the PRECEDE model, and the communication-behavior change (CBC) model. Since a true experimental design was not feasible, program evaluation is based on several complementary quasi-experimental designs. Analysis of baseline data indicate that the county where the intervention is taking place, and the control county, are similar with respect to both demographic characteristics and the current level of screening activity. Preliminary results indicate that the program has been successful in raising women's level of awareness of cervical cancer and cervical screening.

Project Summaries, 1989 - 1990

NASA Technical Reports Server (NTRS)

1990-01-01

Student designs summarized here include two undergraduate space designs and five graduate space designs from fall 1989, plus four undergraduate space designs and four undergraduate aircraft designs from spring 1990. Progress in a number of programs is described. The Geostationary Satellite Servicing Facility, the Lunar Farside Observatory and Science Base, the Texas Educational Satellite, an asteroid rendezvous vehicle, a Titan probe, a subsystems commonality assessment for lunar/Mars landers, a nuclear-thermal rocket propelled Earth-Mars vehicle, and a comprehensive orbital debris management program are among the topics discussed.

Flight program language requirements. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1972-01-01

The activities and results of a study for the definition of flight program language requirements are described. A set of detailed requirements are presented for a language capable of supporting onboard application programming for the Marshall Space Flight Center's anticipated future activities in the decade of 1975-85. These requirements are based, in part, on the evaluation of existing flight programming language designs to determine the applicability of these designs to flight programming activities which are anticipated. The coding of benchmark problems in the selected programming languages is discussed. These benchmarks are in the form of program kernels selected from existing flight programs. This approach was taken to insure that the results of the study would reflect state of the art language capabilities, as well as to determine whether an existing language design should be selected for adaptation.

Efficient System Design and Sustainable Finance for China's Village Electrification Program: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, S.; Yin, H.; Kline, D. M.

2006-08-01

This paper describes a joint effort of the Institute for Electrical Engineering of the Chinese Academy of Sciences (IEE), and the U.S. National Renewable Energy Laboratory (NREL) to support China's rural electrification program. This project developed a design tool that provides guidelines both for off-grid renewable energy system designs and for cost-based tariff and finance schemes to support them. This tool was developed to capitalize on lessons learned from the Township Electrification Program that preceded the Village Electrification Program. We describe the methods used to develop the analysis, some indicative results, and the planned use of the tool in themore » Village Electrification Program.« less

Manned space flight nuclear system safety. Volume 6: Space base nuclear system safety plan

NASA Technical Reports Server (NTRS)

1972-01-01

A qualitative identification of the steps required to assure the incorporation of radiological system safety principles and objectives into all phases of a manned space base program are presented. Specific areas of emphasis include: (1) radiological program management, (2) nuclear system safety plan implementation, (3) impact on program, and (4) summary of the key operation and design guidelines and requirements. The plan clearly indicates the necessity of considering and implementing radiological system safety recommendations as early as possible in the development cycle to assure maximum safety and minimize the impact on design and mission plans.

An Object-Oriented Software Architecture for the Explorer-2 Knowledge Management Environment

PubMed Central

Tarabar, David B.; Greenes, Robert A.; Slosser, Eric T.

1989-01-01

Explorer-2 is a workstation based environment to facilitate knowledge management. It provides consistent access to a broad range of knowledge on the basis of purpose, not type. We have developed a software architecture based on Object-Oriented programming for Explorer-2. We have defined three classes of program objects: Knowledge ViewFrames, Knowledge Resources, and Knowledge Bases. This results in knowledge management at three levels: the screen level, the disk level and the meta-knowledge level. We have applied this design to several knowledge bases, and believe that there is a broad applicability of this design.

Field-based education and indigenous knowledge: Essential components of geoscience education for native American communities

NASA Astrophysics Data System (ADS)

Riggs, Eric M.

2005-03-01

The purpose of this study is to propose a framework drawing on theoretical and empirical science education research that explains the common prominent field-based components of the handful of persistent and successful Earth science education programs designed for indigenous communities in North America. These programs are primarily designed for adult learners, either in a postsecondary or in a technical education setting and all include active collaboration between local indigenous communities and geoscientists from nearby universities. Successful Earth science curricula for indigenous learners share in common an explicit emphasis on outdoor education, a place and problem-based structure, and the explicit inclusion of traditional indigenous knowledge in the instruction. Programs sharing this basic design have proven successful and popular for a wide range of indigenous cultures across North America. We present an analysis of common field-based elements to yield insight into indigenous Earth science education. We provide an explanation for the success of this design based in research on field-based learning, Native American learning styles research, and theoretical and empirical research into the nature and structure of indigenous knowledge. We also provide future research directions that can test and further refine our understanding of best practices in indigenous Earth science education.

NASA's Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jankovsky, Robert S.; Jacobson, David T.; Rawlin, Vincent K.; Mason, Lee S.; Mantenieks, Maris A.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2001-01-01

NASA's Hall thruster program has base research and focused development efforts in support of the Advanced Space Transportation Program, Space-Based Program, and various other programs. The objective of the base research is to gain an improved understanding of the physical processes and engineering constraints of Hall thrusters to enable development of advanced Hall thruster designs. Specific technical questions that are current priorities of the base effort are: (1) How does thruster life vary with operating point? (2) How can thruster lifetime and wear rate be most efficiently evaluated? (3) What are the practical limitations for discharge voltage as it pertains to high specific impulse operation (high discharge voltage) and high thrust operation (low discharge voltage)? (4) What are the practical limits for extending Hall thrusters to very high input powers? and (5) What can be done during thruster design to reduce cost and integration concerns? The objective of the focused development effort is to develop a 50 kW-class Hall propulsion system, with a milestone of a 50 kW engineering model thruster/system by the end of program year 2006. Specific program wear 2001 efforts, along with the corporate and academic participation, are described.

Design-Based Research Principles for Student Orientation to Online Study: Capturing the Lessons Learnt

ERIC Educational Resources Information Center

Wozniak, Helen; Pizzica, Jenny; Mahony, Mary Jane

2012-01-01

Few institutions have reported research on students' "use" of orientation programs designed for mature students returning to study in contemporary learning environments now regularly amalgamating distance and online strategies. We report within a design-based research framework the student experience of "GetLearning," the third…

A Controlled Evaluation of a High School Biomedical Pipeline Program: Design and Methods

NASA Astrophysics Data System (ADS)

Winkleby, Marilyn A.; Ned, Judith; Ahn, David; Koehler, Alana; Fagliano, Kathleen; Crump, Casey

2014-02-01

Given limited funding for school-based science education, non-school-based programs have been developed at colleges and universities to increase the number of students entering science- and health-related careers and address critical workforce needs. However, few evaluations of such programs have been conducted. We report the design and methods of a controlled trial to evaluate the Stanford Medical Youth Science Program's Summer Residential Program (SRP), a 25-year-old university-based biomedical pipeline program. This 5-year matched cohort study uses an annual survey to assess educational and career outcomes among four cohorts of students who participate in the SRP and a matched comparison group of applicants who were not chosen to participate in the SRP. Matching on sociodemographic and academic background allows control for potential confounding. This design enables the testing of whether the SRP has an independent effect on educational- and career-related outcomes above and beyond the effects of other factors such as gender, ethnicity, socioeconomic background, and pre-intervention academic preparation. The results will help determine which curriculum components contribute most to successful outcomes and which students benefit most. After 4 years of follow-up, the results demonstrate high response rates from SRP participants and the comparison group with completion rates near 90 %, similar response rates by gender and ethnicity, and little attrition with each additional year of follow-up. This design and methods can potentially be replicated to evaluate and improve other biomedical pipeline programs, which are increasingly important for equipping more students for science- and health-related careers.

A CONTROLLED EVALUATION OF A HIGH SCHOOL BIOMEDICAL PIPELINE PROGRAM: DESIGN AND METHODS.

PubMed

Winkleby, Marilyn A; Ned, Judith; Ahn, David; Koehler, Alana; Fagliano, Kathleen; Crump, Casey

2014-02-01

Given limited funding for school-based science education, non-school-based programs have been developed at colleges and universities to increase the number of students entering science- and health-related careers and address critical workforce needs. However, few evaluations of such programs have been conducted. We report the design and methods of a controlled trial to evaluate the Stanford Medical Youth Science Program's Summer Residential Program (SRP), a 25-year-old university-based biomedical pipeline program. This 5-year matched cohort study uses an annual survey to assess educational and career outcomes among four cohorts of students who participate in the SRP and a matched comparison group of applicants who were not chosen to participate in the SRP. Matching on sociodemographic and academic background allows control for potential confounding. This design enables the testing of whether the SRP has an independent effect on educational- and career-related outcomes above and beyond the effects of other factors such as gender, ethnicity, socioeconomic background, and pre-intervention academic preparation. The results will help determine which curriculum components contribute most to successful outcomes and which students benefit most. After 4 years of follow-up, the results demonstrate high response rates from SRP participants and the comparison group with completion rates near 90%, similar response rates by gender and ethnicity, and little attrition with each additional year of follow-up. This design and methods can potentially be replicated to evaluate and improve other biomedical pipeline programs, which are increasingly important for equipping more students for science- and health-related careers.

Exploratory research for the development of a computer aided software design environment with the software technology program

NASA Technical Reports Server (NTRS)

Hardwick, Charles

1991-01-01

Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

Lunar in-core thermionic nuclear reactor power system conceptual design

NASA Technical Reports Server (NTRS)

Mason, Lee S.; Schmitz, Paul C.; Gallup, Donald R.

1991-01-01

This paper presents a conceptual design of a lunar in-core thermionic reactor power system. The concept consists of a thermionic reactor located in a lunar excavation with surface mounted waste heat radiators. The system was integrated with a proposed lunar base concept representative of recent NASA Space Exploration Initiative studies. The reference mission is a permanently-inhabited lunar base requiring a 550 kWe, 7 year life central power station. Performance parameters and assumptions were based on the Thermionic Fuel Element (TFE) Verification Program. Five design cases were analyzed ranging from conservative to advanced. The cases were selected to provide sensitivity effects on the achievement of TFE program goals.

Formal Methods, Design, and Collaborative Learning in the First Computer Science Course.

ERIC Educational Resources Information Center

Troeger, Douglas R.

1995-01-01

A new introductory computer science course at City College of New York builds on a foundation of logic to teach programming based on a "design idea," a strong departure from conventional programming courses. Reduced attrition and increased student and teacher enthusiasm have resulted. (MSE)

Community-Based Prevention Specialist. Trainer Manual.

ERIC Educational Resources Information Center

University Research Corp., Bethesda, MD.

This trainer manual is designed to assist facilitators in the design of entry-level courses and programs for substance abuse prevention specialists. The manual initially concentrates on a basic, generic approach to community work, and introduces the knowledge and skills needed to implement substance abuse prevention programs by using the community…

76 FR 21311 - Medicaid Program; Home and Community-Based Services (HCBS) Waivers

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-15

... planned on the grounds of existing Intermediate Care Facilities for Individuals with Mental Retardation... than diagnosis. These changes will enable States to realize administrative and program design... for States that wish to design a waiver that meets the needs of more than one target population. This...

Resource-Based Intervention: Success with Community-Centered Practices

ERIC Educational Resources Information Center

Torrey, Michelle Kerber; Leginus, Mary Anne; Cecere, Susan

2011-01-01

In this commentary the authors share their experiences on the design and implementation of community-centered early intervention programs in Prince George's County, MD. Their aim in designing community-centered programs was to provide infants and toddlers opportunities for learning, language, and motor development in natural environments with…

Training Principles and Program Design

ERIC Educational Resources Information Center

Plisk, Steven

2005-01-01

This article focuses on standards specific to Domain 3: Physical Preparation and Conditioning of the National Standards for Sport Coaches (NASPE, 2004b). It discusses program design concepts that coaches can apply to prepare athletes for the demands of their sport, and is based on both research and best professional practice. Sport preparation has…

Naval Enterprise Engineering: Design, Innovate and Train (NEEDIT)

DTIC Science & Technology

2015-03-04

world and we are somewhat able to stand on the shoulders of giants in Naval Engineering and inherit baseline designs that, in most cases, represent a...Set-Based Design) maximizes design flexibility ( Lamb 2003). However, it may add some risk to schedule or require program managers to trust that the...spiral or Set based design. A design philosophy is a weighted list of attributes used in the evaluation of alternatives ( Lamb 2003). Design leadership

Car Builder: Design, Construct and Test Your Own Cars. School Version with Lesson Plans. [CD-ROM].

ERIC Educational Resources Information Center

Highsmith, Joni Bitman

Car Builder is a scientific CD-ROM-based simulation program that lets students design, construct, modify, test, and compare their own cars. Students can design sedans, four-wheel-drive vehicles, vans, sport cars, and hot rods. They may select for aerodynamics, power, and racing ability, or economic and fuel efficiency. It is a program that teaches…

Effects of standard training in the use of closed-circuit televisions in visually impaired adults: design of a training protocol and a randomized controlled trial

PubMed Central

2010-01-01

Background Reading problems are frequently reported by visually impaired persons. A closed-circuit television (CCTV) can be helpful to maintain reading ability, however, it is difficult to learn how to use this device. In the Netherlands, an evidence-based rehabilitation program in the use of CCTVs was lacking. Therefore, a standard training protocol needed to be developed and tested in a randomized controlled trial (RCT) to provide an evidence-based training program in the use of this device. Methods/Design To develop a standard training program, information was collected by studying literature, observing training in the use of CCTVs, discussing the content of the training program with professionals and organizing focus and discussion groups. The effectiveness of the program was evaluated in an RCT, to obtain an evidence-based training program. Dutch patients (n = 122) were randomized into a treatment group: normal instructions from the supplier combined with training in the use of CCTVs, or into a control group: instructions from the supplier only. The effect of the training program was evaluated in terms of: change in reading ability (reading speed and reading comprehension), patients' skills to operate the CCTV, perceived (vision-related) quality of life and tasks performed in daily living. Discussion The development of the CCTV training protocol and the design of the RCT in the present study may serve as an example to obtain an evidence-based training program. The training program was adjusted to the needs and learning abilities of individual patients, however, for scientific reasons it might have been preferable to standardize the protocol further, in order to gain more comparable results. Trial registration http://www.trialregister.nl, identifier: NTR1031 PMID:20219120

An overview of very high level software design methods

NASA Technical Reports Server (NTRS)

Asdjodi, Maryam; Hooper, James W.

1988-01-01

Very High Level design methods emphasize automatic transfer of requirements to formal design specifications, and/or may concentrate on automatic transformation of formal design specifications that include some semantic information of the system into machine executable form. Very high level design methods range from general domain independent methods to approaches implementable for specific applications or domains. Applying AI techniques, abstract programming methods, domain heuristics, software engineering tools, library-based programming and other methods different approaches for higher level software design are being developed. Though one finds that a given approach does not always fall exactly in any specific class, this paper provides a classification for very high level design methods including examples for each class. These methods are analyzed and compared based on their basic approaches, strengths and feasibility for future expansion toward automatic development of software systems.

Accounting Technology Associate Degree. Louisiana Technical Education Program and Course Standards. Competency-Based Postsecondary Curriculum Outline from Bulletin 1822.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document outlines the curriculum of Louisiana's accounting technology associate degree program, which is a 6-term (77-credit hour) competency-based program designed to prepare students for employment as accounting technicians providing technical administrative support to professional accountants and other financial management personnel.…

Effects of an In-Service Training Program Using the Routines-Based Interview

ERIC Educational Resources Information Center

Boavida, Tânia; Aguiar, Cecília; McWilliam, R. A.; Correia, Nadine

2016-01-01

The focus of this study is an in-service training program rooted in routines-based early intervention and designed to improve the quality of goals and objectives on individualized plans. Participants were local intervention team members and other professionals who worked closely with each team. This training program involved a small number of…

A Balancing Act in the Third Space: Graduate-Level Earth Science in an Urban Teacher-Residency Program

ERIC Educational Resources Information Center

Zirakparvar, N. Alex

2015-01-01

This article describes a museum-based urban teacher-residency (UTR) program's approach to building subject-specific content knowledge and research experience in Earth Science teacher candidates. In the museum-based program, graduate-level science courses and research experiences are designed and implemented specifically for the UTR by active Earth…

Coming Home: A Group-Based Approach for Assisting Military Veterans in Transition

ERIC Educational Resources Information Center

Westwood, Marvin J.; McLean, Holly; Cave, Douglas; Borgen, William; Slakov, Paul

2010-01-01

This study is an evaluation of the Veterans Transition Program, a residential, group-based program designed to assist the transition of military personnel back into Canadian society by aiding with their personal and career readjustment. Participants in the program included 18 male soldiers who experienced varying degrees of combat-related trauma.…

A Systematic Meta-Analytic Review of Evidence for the Effectiveness of the "Fast ForWord" Language Intervention Program

ERIC Educational Resources Information Center

Strong, Gemma K.; Torgerson, Carole J.; Torgerson, David; Hulme, Charles

2011-01-01

Background: Fast ForWord is a suite of computer-based language intervention programs designed to improve children's reading and oral language skills. The programs are based on the hypothesis that oral language difficulties often arise from a rapid auditory temporal processing deficit that compromises the development of phonological…

Physical Activity into Socialization: A Movement-Based Social Skills Program for Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Lee, Jihyun; Vargo, Kristina K.

2017-01-01

Children with autism spectrum disorder (ASD) often exhibit deficits in social-communicative behaviors. Given the increased prevalence of children with ASD, programs designed to teach social-communicative behaviors are necessary. This article introduces a movement-based program that embeds social-skill components to improve the motor skills and…

A Mentoring Program for Inquiry-Based Teaching in a College Geometry Class

ERIC Educational Resources Information Center

Miller, Nathaniel; Wakefield, Nathan

2014-01-01

This paper describes a mentoring program designed to prepare novice instructors to teach a college geometry class using inquiry-based methods. The mentoring program was used in a medium-sized public university with approximately 12,000 undergraduate students and 1,500 graduate students. The authors worked together to implement a mentoring program…

Using the Logic Model to Plan Extension and Outreach Program Development and Scholarship

ERIC Educational Resources Information Center

Corbin, Marilyn; Kiernan, Nancy Ellen; Koble, Margaret A.; Watson, Jack; Jackson, Daney

2004-01-01

In searching for a process to help program teams of campus-based faculty and field-based educators develop five-year and annual statewide program plans, cooperative extension administrators and specialists in Penn State's College of Agricultural Sciences discovered that the use of the logic model process can influence the successful design of…

Evaluation of a cross-cultural training program for Pakistani educators: Lessons learned and implications for program planning.

PubMed

Mazur, Rebecca; Woodland, Rebecca H

2017-06-01

In this paper, we share the results of a summative evaluation of PEILI, a US-based adult professional development/training program for secondary school Pakistani teachers. The evaluation was guided by the theories of cultural competence (American Psychological Association, 2003; Bamberger, 1999; Wadsworth, 2001) and established frameworks for the evaluation of professional development/training and instructional design (Bennett, 1975; Guskey, 2002; King, 2014; Kirkpatrick, 1967). The explicit and implicit stakeholder assumptions about the connections between program resources, activities, outputs, and outcomes are described. Participant knowledge and skills were measured via scores on a pre/posttest of professional knowledge, and a standards-based performance assessment rubric. In addition to measuring short-term program outcomes, we also sought to incorporate theory-driven thinking into the evaluation design. Hence, we examined participant self-efficacy and access to social capital, two evidenced-based determinants or "levers" that theoretically explain the transformative space between an intervention and its outcomes (Chen, 2012). Data about program determinants were collected and analyzed through a pre/posttest of self-efficacy and social network analysis. Key evaluation findings include participant acquisition of new instructional skills, increased self-efficacy, and the formation of a nascent professional support network. Lessons learned and implications for the design and evaluation of cross-cultural teacher professional development programs are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Beetles, Beechnuts, and Behavior: Using Nature-based Activities To Develop Social Skills.

ERIC Educational Resources Information Center

Henderson, Kelly

This paper describes an instructional method designed to increase opportunities for students to learn and practice appropriate social skills. The strategies for development and implementation of such structured programs of nature-based and animal-based activities are based in part on a pilot program in three urban elementary and middle schools.…

Design for a Manufacturing Method for Memristor-Based Neuromorphic Computing Processors

DTIC Science & Technology

2013-03-01

DESIGN FOR A MANUFACTURING METHOD FOR MEMRISTOR- BASED NEUROMORPHIC COMPUTING PROCESSORS UNIVERSITY OF PITTSBURGH MARCH 2013...BASED NEUROMORPHIC COMPUTING PROCESSORS 5a. CONTRACT NUMBER FA8750-11-1-0271 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 62788F 6. AUTHOR(S...synapses and implemented a neuromorphic computing system based on our proposed synapse designs. The robustness of our system is also evaluated by

A high level language for a high performance computer

NASA Technical Reports Server (NTRS)

Perrott, R. H.

1978-01-01

The proposed computational aerodynamic facility will join the ranks of the supercomputers due to its architecture and increased execution speed. At present, the languages used to program these supercomputers have been modifications of programming languages which were designed many years ago for sequential machines. A new programming language should be developed based on the techniques which have proved valuable for sequential programming languages and incorporating the algorithmic techniques required for these supercomputers. The design objectives for such a language are outlined.

Developing Childhood Injury Prevention Programs: An Administrative Guide for State Maternal and Child Health (Title V) Programs.

ERIC Educational Resources Information Center

Birch & Davis Associates, Inc., Silver Spring, MD.

Based primarily on the experience of three childhood injury prevention demonstration projects, this manual provides state Title V program directors with an action guide for developing targeted childhood injury prevention programs. The manual is divided into four sections: background; program planning; program design; and program implementation and…

Evaluating a Web-Based Educational Module on Oral Cancer Examination Based on a Behavioral Framework.

PubMed

Wee, Alvin G; Zimmerman, Lani M; Pullen, Carol H; Allen, Carl M; Lambert, Paul M; Paskett, Electra D

2016-03-01

Patients at risk of developing oral and/or oropharyngeal cancer (OPC) are more likely to see primary care providers (PCPs) than a dentist. Many PCPs do not regularly perform oral cancer examination (OCE). The purpose of this study was to design a web-based educational program based on a behavioral framework to encourage PCPs to conduct OCE. PCPs were solicited to provide feedback on the program and to evaluate their short-term knowledge. The integrated behavioral model was used to design the program. Fifteen PCPs (five in each group: physicians, physician assistants, and nurse practitioners) reviewed the program and took a posttest: (1) index of knowledge of risk factors for oral cancer (RiskOC) and (2) index of knowledge of diagnostic procedures for oral cancer (DiagOC). Findings from the process evaluation were mainly positive, with comments on the length of the program comprising the ten negative comments. No significant difference among groups of PCPs (physicians, physician assistants, and nurse practitioners) was detected for DiagOC (p = 0.43) or RiskOC (p = 0.201). A program on OPC for PCPs should be less than 40 min. Postviewing knowledge outcomes were similar for all PCPs. The web-based program on OPC based on a behavioral framework could have similar short-term knowledge outcomes for all PCPs and may increase the number of PCPs performing OCEs.

Stepping Stones Triple P: The Theoretical Basis and Development of an Evidence-Based Positive Parenting Program for Families with a Child Who Has a Disability

ERIC Educational Resources Information Center

Sanders, Matthew; Mazzucchelli, Trevor; Studman, Lisa

2004-01-01

Stepping Stones Triple P is the first in a series of programs based on the Triple P--Positive Parenting Program that has been specifically designed for families who have a child with a disability. This paper presents the rationale, theoretical foundations, historical development and distinguishing features of the program. The multi-level…

Preliminary Design Program: Vapor Compression Distillation Flight Experiment Program

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Boyda, R. B.

1995-01-01

This document provides a description of the results of a program to prepare a preliminary design of a flight experiment to demonstrate the function of a Vapor Compression Distillation (VCD) Wastewater Processor (WWP) in microgravity. This report describes the test sequence to be performed and the hardware, control/monitor instrumentation and software designs prepared to perform the defined tests. the purpose of the flight experiment is to significantly reduce the technical and programmatic risks associated with implementing a VCD-based WWP on board the International Space Station Alpha.

Predictors of Middle School Students' Interest in Participating in an Incentive-Based Tobacco Prevention and Cessation Program in Connecticut

PubMed Central

Morean, Meghan E.; Camenga, Deepa R.; Kong, Grace; Cavallo, Dana A.; Schepis, Ty S.

2014-01-01

Behavioral incentives have been used to encourage smoking cessation in older adolescents, but the acceptability of incentives to promote a smoke-free lifestyle in younger adolescents is unknown. To inform the development of novel, effective, school-based interventions for youth, we assessed middle school students' interest in participating in an incentive-based tobacco abstinence program. We surveyed 988 students (grades 6–8) attending three Connecticut middle schools to determine whether interest in program participation varied as a function of (1) intrapersonal factors (i.e., demographic characteristics (sex, age, race), smoking history, and trait impulsivity) and/or (2) aspects of program design (i.e., prize type, value, and reward frequency). Primary analyses were conducted using multiple regression. A majority of students (61.8%) reported interest in program participation. Interest did not vary by gender, smoking risk status, or offering cash prizes. However, younger students, non-Caucasian students, behaviorally impulsive students, and students with higher levels of self-regulation were more likely to report interest. Inexpensive awards (e.g., video games) offered monthly motivated program interest. In sum, middle school students reported high levels of interest in an incentive-based program to encourage a tobacco-free lifestyle. These formative data can inform the design of effective, incentive-based smoking cessation and prevention programs in middle schools. PMID:25147747

Adaptation and dissemination of an evidence-based obesity prevention intervention: design of a comparative effectiveness trial.

PubMed

Buscemi, Joanna; Odoms-Young, Angela; Stolley, Melinda L; Blumstein, Lara; Schiffer, Linda; Berbaum, Michael L; McCaffrey, Jennifer; Montoya, Anastasia McGee; Braunschweig, Carol; Fitzgibbon, Marian L

2014-07-01

Low-income youth are at increased risk for excess weight gain. Although evidence-based prevention programs exist, successful adaptation to provide wide dissemination presents a challenge. Hip-Hop to Health (HH) is a school-based obesity prevention intervention that targets primarily preschool children of low-income families. In a large randomized controlled trial, HH was found to be efficacious for prevention of excessive weight gain. The Expanded Food and Nutrition Education Program (EFNEP) and the Supplemental Nutrition Assistance Program-Education (SNAP-Ed) are USDA-funded nutrition education programs offered to low-income families, and may provide an ideal platform for the wide dissemination of evidence-based obesity prevention programs. A research-practice partnership was established in order to conduct formative research to guide the adaptation and implementation of HH through EFNEP and SNAP-Ed. We present the design and method of a comparative effectiveness trial that will determine the efficacy of HH when delivered by peer educators through these programs compared to the standard EFNEP and SNAP-Ed nutrition education (NE) curriculum. Results from this trial will inform larger scale dissemination. The dissemination of HH through government programs has the potential to increase the reach of efficacious obesity prevention programs that target low-income children and families. Copyright © 2014 Elsevier Inc. All rights reserved.

Adaptation and Dissemination of an Evidence-Based Obesity Prevention Intervention: Design of a Comparative Effectiveness Trial

PubMed Central

Buscemi, Joanna; Odoms-Young, Angela; Stolley, Melinda L.; Blumstein, Lara; Schiffer, Linda; Berbaum, Michael L.; McCaffrey, Jennifer; Montoya, Anastasia McGee; Braunschweig, Carol; Fitzgibbon, Marian L.

2014-01-01

Low-income youth are at increased risk for excess weight gain. Although evidence-based prevention programs exist, successful adaptation to provide wide dissemination presents a challenge. Hip-Hop to Health (HH) is a school-based obesity prevention intervention that targets primarily preschool children of low-income families. In a large randomized controlled trial, HH was found to be efficacious for prevention of excessive weight gain. The Expanded Food and Nutrition Education Program (EFNEP) and the Supplemental Nutrition Assistance Program--Education (SNAP-Ed) are USDA-funded nutrition education programs offered to low-income families, and may provide an ideal platform for the wide dissemination of evidence-based obesity prevention programs. A research-practice partnership was established in order to conduct formative research to guide the adaptation and implementation of HH through EFNEP and SNAP-Ed. We present the design and method of a comparative effectiveness trial that will determine the efficacy of HH when delivered by peer educators through these programs compared to the standard EFNEP and SNAP-Ed nutrition education (NE) curriculum. Results from this trial will inform larger scale dissemination. The dissemination of HH through government programs has the potential to increase the reach of efficacious obesity prevention programs that target low-income children and families. PMID:24952282

Strategies of Computer-Based Instructional Design: A Review of Guidelines and Empirical Research

DTIC Science & Technology

1990-05-01

tutorial or information-oriented lesson, a flashcard -type drill, or a simulation or game. 6 Guidelines. Instructional designers must decide whether...amount of inter- activity and feedback. An information-only program presented textual material without any questions. A flashcard -type drill program...educational game program was identical to the flashcard -type drill, except feedback was provided for responses. Results showed no differences in posttest

Research and Design of Embedded Wireless Meal Ordering System Based on SQLite

NASA Astrophysics Data System (ADS)

Zhang, Jihong; Chen, Xiaoquan

The paper describes features and internal architecture and developing method of SQLite. And then it gives a design and program of meal ordering system. The system realizes the information interaction among the users and embedded devices with SQLite as database system. The embedded database SQLite manages the data and achieves wireless communication by using Bluetooth. A system program based on Qt/Embedded and Linux drivers realizes the local management of environmental data.

The Computer Aided Aircraft-design Package (CAAP)

NASA Technical Reports Server (NTRS)

Yalif, Guy U.

1994-01-01

The preliminary design of an aircraft is a complex, labor-intensive, and creative process. Since the 1970's, many computer programs have been written to help automate preliminary airplane design. Time and resource analyses have identified, 'a substantial decrease in project duration with the introduction of an automated design capability'. Proof-of-concept studies have been completed which establish 'a foundation for a computer-based airframe design capability', Unfortunately, today's design codes exist in many different languages on many, often expensive, hardware platforms. Through the use of a module-based system architecture, the Computer aided Aircraft-design Package (CAAP) will eventually bring together many of the most useful features of existing programs. Through the use of an expert system, it will add an additional feature that could be described as indispensable to entry level engineers and students: the incorporation of 'expert' knowledge into the automated design process.

Analysis of Combined Data from Heterogeneous Study Designs: A Methodological Proposal from the Patient Navigation Research program

PubMed Central

Roetzheim, Richard G.; Freund, Karen M.; Corle, Don K.; Murray, David M.; Snyder, Frederick R.; Kronman, Andrea C.; Jean-Pierre, Pascal; Raich, Peter C.; Holden, Alan E. C.; Darnell, Julie S.; Warren-Mears, Victoria; Patierno, Steven; Design, PNRP; Committee, Analysis

2013-01-01

Background The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, each employing its own unique study design. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from members of the PNRP Design and Analysis Committee Purpose To review possible methodologies for analyzing combined data arising from heterogeneous study designs. Methods The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. Conclusions were based on simple consensus. The five approaches reviewed included: 1) Analyzing and reporting each project separately, 2) Combining data from all projects and performing an individual-level analysis, 3) Pooling data from projects having similar study designs, 4) Analyzing pooled data using a prospective meta analytic technique, 5) Analyzing pooled data utilizing a novel simulated group randomized design. Results Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and in their impact from differing project sample sizes. Limitations The conclusions reached were based on expert opinion and not derived from actual analyses performed. Conclusions The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multi-site community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become more salient. Discussion of the analytic issues faced by the PNRP and the methodological approaches we considered may be of value to other prospective community-based research programs. PMID:22273587

Analysis of combined data from heterogeneous study designs: an applied example from the patient navigation research program.

PubMed

Roetzheim, Richard G; Freund, Karen M; Corle, Don K; Murray, David M; Snyder, Frederick R; Kronman, Andrea C; Jean-Pierre, Pascal; Raich, Peter C; Holden, Alan Ec; Darnell, Julie S; Warren-Mears, Victoria; Patierno, Steven

2012-04-01

The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, with similar clinical criteria but with different study designs. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed-upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from the members of the PNRP Design and Analysis Committee. To review possible methodologies for analyzing combined data arising from heterogeneous study designs. The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. The conclusions were based on simple consensus. The five approaches reviewed included the following: (1) analyzing and reporting each project separately, (2) combining data from all projects and performing an individual-level analysis, (3) pooling data from projects having similar study designs, (4) analyzing pooled data using a prospective meta-analytic technique, and (5) analyzing pooled data utilizing a novel simulated group-randomized design. Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and to accommodate differing project sample sizes. The conclusions reached were based on expert opinion and not derived from actual analyses performed. The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multisite community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become more salient. Discussion of the analytic issues faced by the PNRP and the methodological approaches we considered may be of value to other prospective community-based research programs.

Designing an Elderly Assistance Program Based-on Home Care

NASA Astrophysics Data System (ADS)

Umusya'adah, L.; Juwaedah, A.; Jubaedah, Y.; Ratnasusanti, H.; Puspita, R. H.

2018-02-01

PKH (Program Keluarga Harapan) is a program of Indonesia’s Government through the ministry of social directorate to accelerate the poverty reduction and the achievement of Millennium Development Goals (MDGs) target as well as the policies development in social protection and social welfare domain or commonly referred to as Indonesian Conditional Cash Transfer (CCT) Program. This research is motivated that existing participants of the family expectation program (PKH) that already exist in Sumedang, Indoensia, especially in the South Sumedang on the social welfare components is only limited to the health checking, while for assisting the elderly based Home Care program there has been no structured and systematic, where as the elderly still need assistance, especially from the family and community environment. This study uses a method of Research and Development with Model Addie which include analysis, design, development, implementation and evaluation. Participants in this study using purposive sampling, where selected families of PKH who provide active assistance to the elderly with 82 participants. The program is designed consists of program components: objectives, goals, forms of assistance, organizing institutions and implementing the program, besides, program modules include assisting the elderly. Form of assistance the elderly cover physical, social, mental and spiritual. Recommended for families and companions PKH, the program can be implemented to meet the various needs of the elderly. For the elderly should introspect, especially in the health and follow the advice recommended by related parties

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Integrated information processing requirements

NASA Technical Reports Server (NTRS)

Southall, J. W.

1979-01-01

The engineering-specified requirements for integrated information processing by means of the Integrated Programs for Aerospace-Vehicle Design (IPAD) system are presented. A data model is described and is based on the design process of a typical aerospace vehicle. General data management requirements are specified for data storage, retrieval, generation, communication, and maintenance. Information management requirements are specified for a two-component data model. In the general portion, data sets are managed as entities, and in the specific portion, data elements and the relationships between elements are managed by the system, allowing user access to individual elements for the purpose of query. Computer program management requirements are specified for support of a computer program library, control of computer programs, and installation of computer programs into IPAD.

Design and evaluation of a wireless sensor network based aircraft strength testing system.

PubMed

Wu, Jian; Yuan, Shenfang; Zhou, Genyuan; Ji, Sai; Wang, Zilong; Wang, Yang

2009-01-01

The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN) technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST) system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system.

Design and Evaluation of a Wireless Sensor Network Based Aircraft Strength Testing System

PubMed Central

Wu, Jian; Yuan, Shenfang; Zhou, Genyuan; Ji, Sai; Wang, Zilong; Wang, Yang

2009-01-01

The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN) technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST) system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system. PMID:22408521

A Case Study on Collective Cognition and Operation in Team-Based Computer Game Design by Middle-School Children

ERIC Educational Resources Information Center

Ke, Fengfeng; Im, Tami

2014-01-01

This case study examined team-based computer-game design efforts by children with diverse abilities to explore the nature of their collective design actions and cognitive processes. Ten teams of middle-school children, with a high percentage of minority students, participated in a 6-weeks, computer-assisted math-game-design program. Essential…

Space station MSFC-DPD-235/DR no. MA-05 phase C/D program development plan. Volume 2: Phase C/D, programmatic requirements

NASA Technical Reports Server (NTRS)

1971-01-01

The design plan requirements define the design implementation and control requirements for Phase C/D of the Modular Space Station Project and specifically address the Initial Space Station phase of the Space Station Program (modular). It is based primarily on the specific objective of translating the requirements of the Space Station Program, Project, Interface, and Support Requirements and preliminary contract end x item specifications into detail design of the operational systems which comprise the initial space station. This document is designed to guide aerospace contractors in the planning and bidding for Phase C/D.

The comprehensive community-based traffic safety program : phase II, program assessment for District 2 and District 7, final report.

DOT National Transportation Integrated Search

1987-01-01

The program assessment phase was designed to identify community resources and address the recommendation, made in Phase I, that initial countermeasures should target the program areas of occupant protection, alcohol, selective enforcement, and pedest...

Developing an Online Certification Program for Nutrition Education Assistants

ERIC Educational Resources Information Center

Christofferson, Debra; Christensen, Nedra; LeBlanc, Heidi; Bunch, Megan

2012-01-01

Objective: To develop an online certification program for nutrition education paraprofessionals to increase knowledge and confidence and to overcome training barriers of programming time and travel expenses. Design: An online interactive certification course based on Supplemental Nutrition Assistance Program-Education and Expanded Food and…

Language Program Evaluation

ERIC Educational Resources Information Center

Norris, John M.

2016-01-01

Language program evaluation is a pragmatic mode of inquiry that illuminates the complex nature of language-related interventions of various kinds, the factors that foster or constrain them, and the consequences that ensue. Program evaluation enables a variety of evidence-based decisions and actions, from designing programs and implementing…

A National Evaluation of Community-Based Youth Cessation Programs: Design and Implementation

ERIC Educational Resources Information Center

Curry, Susan J.; Mermelstein, Robin J.; Sporer, Amy K.; Emery, Sherry L.; Berbaum, Michael L.; Campbell, Richard T.; Carusi, Charles; Flay, Brian; Taylor, Kristie; Warnecke, Richard B.

2010-01-01

Although widely available, little is known about the effectiveness of youth cessation treatments delivered in real-world settings. The authors recruited a nonprobability sample of 41 community-based group-format programs that treated at least 15 youth per year and included evidence-based treatment components. Data collection included longitudinal…

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.

1982-03-01

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform themore » needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume contains appendixes on pump design, cavitation damage, performance testing, hydraulics, two-phase flow in pumps, flow stability, and rotor dynamics.« less

Design Language for Digital Systems

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1985-01-01

Digital Systems Design Language (DDL) is convenient hardware description language for developing and testing digital designs and for inputting design details into design automation system. Describes digital systems at gate, register transfer, and combinational block levels. DDL-based programs written in FORTRAN IV for batch execution.

Through the eyes of professional developers: Understanding the design of learning experiences for science teachers

NASA Astrophysics Data System (ADS)

Higgins, Tara Eileen

Professional development is important for improving teacher practice and student learning, particularly in inquiry-oriented and technology-enhanced science instruction. This study examines professional developers' practices and their impact on teachers' classroom instruction and student achievement. It analyzes professional developers designing and implementing a five-year professional development program designed to support middle school science teachers. The professional developers are four university-based researchers who worked with sixteen science teachers over three years, setting program goals, facilitating workshops, providing in-classroom support for teachers, and continually refining the program. The analysis is guided by the knowledge integration perspective, a sociocognitive framework for understanding how teachers and professional developers integrate their ideas about teaching and learning. The study investigates the professional developers' goals and teachers' interpretations of those goals. It documents how professional developers plan teacher learning experiences and explores the connection between professional development activities and teachers' classroom practice. Results are based on two rounds of interviews with professional developers, audio recordings of professional developers' planning meetings and videotaped professional development activities. Data include classroom observations, teacher interviews, teacher reflections during professional development activities, and results from student assessments. The study shows the benefit of a professional development approach that relies on an integrated cycle of setting goals, understanding teachers' interpretations, and refining implementation. The professional developers based their design on making inquiry and technology accessible, situating professional development in teachers' work, supporting collaboration, and sustaining learning. The findings reflect alignment of the design goals with the perspective guiding the curriculum design, and consider multiple goals for student and teacher learning. The study has implications for professional development design, particularly in supporting inquiry-oriented science and technology-enhanced instruction. Effective professional developers formulate coherent conceptions of program goals, use evidence of teacher outcomes to refine their goals and practices, and connect student and teacher learning. This study illustrates the value of research on the individuals who design and lead professional development programs.

Design of a Performance-Responsive Drill and Practice Algorithm for Computer-Based Training.

ERIC Educational Resources Information Center

Vazquez-Abad, Jesus; LaFleur, Marc

1990-01-01

Reviews criticisms of the use of drill and practice programs in educational computing and describes potentials for its use in instruction. Topics discussed include guidelines for developing computer-based drill and practice; scripted training courseware; item format design; item bank design; and a performance-responsive algorithm for item…

Multi-Armed RCTs: A Design-Based Framework. NCEE 2017-4027

ERIC Educational Resources Information Center

Schochet, Peter Z.

2017-01-01

Design-based methods have recently been developed as a way to analyze data from impact evaluations of interventions, programs, and policies (Imbens and Rubin, 2015; Schochet, 2015, 2016). The estimators are derived using the building blocks of experimental designs with minimal assumptions, and are unbiased and normally distributed in large samples…

A mobile phone-based care model for outpatient cardiac rehabilitation: the care assessment platform (CAP)

PubMed Central

2010-01-01

Background Cardiac rehabilitation programs offer effective means to prevent recurrence of a cardiac event, but poor uptake of current programs have been reported globally. Home based models are considered as a feasible alternative to avoid various barriers related to care centre based programs. This paper sets out the study design for a clinical trial seeking to test the hypothesis that these programs can be better and more efficiently supported with novel Information and Communication Technologies (ICT). Methods/Design We have integrated mobile phones and web services into a comprehensive home- based care model for outpatient cardiac rehabilitation. Mobile phones with a built-in accelerometer sensor are used to measure physical exercise and WellnessDiary software is used to collect information on patients' physiological risk factors and other health information. Video and teleconferencing are used for mentoring sessions aiming at behavioural modifications through goal setting. The mentors use web-portal to facilitate personal goal setting and to assess the progress of each patient in the program. Educational multimedia content are stored or transferred via messaging systems to the patients phone to be viewed on demand. We have designed a randomised controlled trial to compare the health outcomes and cost efficiency of the proposed model with a traditional community based rehabilitation program. The main outcome measure is adherence to physical exercise guidelines. Discussion The study will provide evidence on using mobile phones and web services for mentoring and self management in a home-based care model targeting sustainable behavioural modifications in cardiac rehabilitation patients. Trial registration The trial has been registered in the Australian New Zealand Clinical Trials Registry (ANZCTR) with number ACTRN12609000251224. PMID:20109196

Control/structure interaction design methodology

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.; Layman, William E.

1989-01-01

The Control Structure Interaction Program is a technology development program for spacecraft that exhibit interactions between the control system and structural dynamics. The program objectives include development and verification of new design concepts (such as active structure) and new tools (such as a combined structure and control optimization algorithm) and their verification in ground and possibly flight test. The new CSI design methodology is centered around interdisciplinary engineers using new tools that closely integrate structures and controls. Verification is an important CSI theme and analysts will be closely integrated to the CSI Test Bed laboratory. Components, concepts, tools and algorithms will be developed and tested in the lab and in future Shuttle-based flight experiments. The design methodology is summarized in block diagrams depicting the evolution of a spacecraft design and descriptions of analytical capabilities used in the process. The multiyear JPL CSI implementation plan is described along with the essentials of several new tools. A distributed network of computation servers and workstations was designed that will provide a state-of-the-art development base for the CSI technologies.

Preliminary design of a high speed civil transport: The Opus 0-001

NASA Technical Reports Server (NTRS)

1992-01-01

Based on research into the technology and issues surrounding the design, development, and operation of a second generation High Speed Civil Transport, HSCT, the Opus 0-001 team completed the preliminary design of a sixty passenger, three engine aircraft. The design of this aircraft was performed using a computer program which the team wrote. This program automatically computed the geometric, aerodynamic, and performance characteristic of an aircraft whose preliminary geometry was specified. The Opus 0-001 aircraft was designed for a cruise Mach number of 2.2, a range of 4,700 nautical miles and its design was based in current or very near term technology. Its small size was a consequence of an emphasis on a profitable, low cost program, capable of delivering tomorrow's passengers in style and comfort at prices that make it an attractive competitor to both current and future subsonic transport aircraft. Several hundred thousand cases of Cruise Mach number, aircraft size and cost breakdown were investigated to obtain costs and revenues for which profit was calculated. The projected unit flyaway cost was $92.0 million per aircraft.

Telephone-based disease management: why it does not save money.

PubMed

Motheral, Brenda R

2011-01-01

To understand why the current telephone-based model of disease management (DM) does not provide cost savings and how DM can be retooled based on the best available evidence to deliver better value. Literature review. The published peer-reviewed evaluations of DM and transitional care models from 1990 to 2010 were reviewed. Also examined was the cost-effectiveness literature on the treatment of chronic conditions that are commonly included in DM programs, including heart failure, diabetes mellitus, coronary artery disease, and asthma. First, transitional care models, which have historically been confused with commercial DM programs, can provide credible savings over a short period, rendering them low-hanging fruit for plan sponsors who desire real savings. Second, cost-effectiveness research has shown that the individual activities that constitute contemporary DM programs are not cost saving except for heart failure. Targeting of specific patients and activity combinations based on risk, actionability, treatment and program effectiveness, and costs will be necessary to deliver a cost-saving DM program, combined with an outreach model that brings vendors closer to the patient and physician. Barriers to this evidence-driven approach include resources required, marketability, and business model disruption. After a decade of market experimentation with limited success, new thinking is called for in the design of DM programs. A program design that is based on a cost-effectiveness approach, combined with greater program efficacy, will allow for the development of DM programs that are cost saving.

Language Analysis Package (L.A.P.) Version I System Design.

ERIC Educational Resources Information Center

Porch, Ann

To permit researchers to use the speed and versatility of the computer to process natural language text as well as numerical data without undergoing special training in programing or computer operations, a language analysis package has been developed partially based on several existing programs. An overview of the design is provided and system…

When Control Groups Do Not Exist: Program Evaluation without a Net.

ERIC Educational Resources Information Center

Clark, Sheldon B.; And Others

Suggestions, based on the experience of researchers at Oak Ridge (Tennessee) Associated Universities (ORAU), are offered on how evaluations in which true experimental designs are not possible can be designed for meaningful comparison. The ORAU conducts evaluation and assessment studies of educational programs intended to explore some aspect of the…

77 FR 46094 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-02

... that occurs before a program is designed and implemented, or while a program is being conducted and is... behavioral but most often they are cycles of interviews and focus groups designed to inform the development... instruments, (3) methodological research, (4) usability testing of technology-based instruments and materials...

Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

ERIC Educational Resources Information Center

Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

2013-01-01

The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

International Workforce Initiatives: Definitions, Design Options, and Project Profiles. Working Paper Series. No. 1

ERIC Educational Resources Information Center

Wright, J.W., Jr.

2010-01-01

This publication is intended for three primary audiences: international development professionals who want to define "workforce" for program design purposes, those who seek information about field activities, and those who want to reflect on the implementation of successful, high impact programs--whether they were broad-based or…

Practice Ethical Behavior. Work Maturity Skills. Competency 4.0.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Designed for use as a part of the Work Maturity Skills Training Program, this unit consists of instructional materials dealing with practicing ethical behavior. (The Work Maturity Skills Training Program is a set of individualized competency-based units that are designed to help participants develop the competencies they need to find and retain…

Evaluation of a School-Based Multicomponent Nutrition Education Program to Improve Young Children's Fruit and Vegetable Consumption

ERIC Educational Resources Information Center

Prelip, Michael; Kinsler, Janni; Thai, Chan Le; Erausquin, Jennifer Toller; Slusser, Wendelin

2012-01-01

Objective: To assess the impact of a multicomponent nutrition education program on student knowledge, attitudes, and behaviors related to consumption of fruits and vegetables (FVs). Design: Quasi-experimental pretest/posttest research design; 3 study conditions (Intervention+, Intervention, Comparison). Setting: Six schools from the Los Angeles…

Using Multimedia for Teaching Analysis in History of Modern Architecture.

ERIC Educational Resources Information Center

Perryman, Garry

This paper presents a case for the development and support of a computer-based interactive multimedia program for teaching analysis in community college architecture design programs. Analysis in architecture design is an extremely important strategy for the teaching of higher-order thinking skills, which senior schools of architecture look for in…

The Design and Development of an Online, Case-Based Course in a Teacher Preparation Program

ERIC Educational Resources Information Center

Peña, Carmen M.

2004-01-01

The goals of this study were to: 1) design a web-based course using WebCT for future secondary school teachers at the University of Texas Pan American, 2) evaluate the effectiveness of the course, and 3) provide a set of guidelines for designing web-based courses for other teacher educators. The participants in this study consisted of junior- and…

[Curricular design of health postgraduate programs: the case of Masters in epidemiology].

PubMed

Bobadilla, J L; Lozano, R; Bobadilla, C

1991-01-01

This paper discusses the need to create specific programs for the training of researchers in epidemiology, a field that has traditionally been ignored by the graduate programs in public health. This is due, in part, to the emphasis that has been placed on the training of professionals in other areas of public health. The paper also includes the results of a consensus exercise developed during the curricular design of the Masters Program in Epidemiology of the School of Medicine of the National Autonomous University of Mexico. The technique used during the consensus exercise was the TKJ, which allows the presentation of ideas and possible solutions for a specific problem. This is probably the first published experience in the use of such a technique for the design of an academic curriculum. Taking as a base the general characteristics of the students, the substantive, disciplinary and methodological subjects were chosen. The results showed a need for a multidisciplinary approach based on modern methodologies of statistics and epidemiology. The usefulness of the results of the curricular design and the superiority of this method to reach consensus is also discussed.

Analysis of a mammography teaching program based on an affordance design model.

PubMed

Luo, Ping; Eikman, Edward A; Kealy, William; Qian, Wei

2006-12-01

The wide use of computer technology in education, particularly in mammogram reading, asks for e-learning evaluation. The existing media comparative studies, learner attitude evaluations, and performance tests are problematic. Based on an affordance design model, this study examined an existing e-learning program on mammogram reading. The selection criteria include content relatedness, representativeness, e-learning orientation, image quality, program completeness, and accessibility. A case study was conducted to examine the affordance features, functions, and presentations of the selected software. Data collection and analysis methods include interviews, protocol-based document analysis, and usability tests and inspection. Also some statistics were calculated. The examination of PBE identified that this educational software designed and programmed some tools. The learner can use these tools in the process of optimizing displays, scanning images, comparing different projections, marking the region of interests, constructing a descriptive report, assessing one's learning outcomes, and comparing one's decisions with the experts' decisions. Further, PBE provides some resources for the learner to construct one's knowledge and skills, including a categorized image library, a term-searching function, and some teaching links. Besides, users found it easy to navigate and carry out tasks. The users also reacted positively toward PBE's navigation system, instructional aids, layout, pace and flow of information, graphics, and other presentation design. The software provides learners with some cognitive tools, supporting their perceptual problem-solving processes and extending their capabilities. Learners can internalize the mental models in mammogram reading through multiple perceptual triangulations, sensitization of related features, semantic description of mammogram findings, and expert-guided semantic report construction. The design of these cognitive tools and the software interface matches the findings and principles in human learning and instructional design. Working with PBE's case-based simulations and categorized gallery, learners can enrich and transfer their experience to their jobs.

MCMC-ODPR: primer design optimization using Markov Chain Monte Carlo sampling.

PubMed

Kitchen, James L; Moore, Jonathan D; Palmer, Sarah A; Allaby, Robin G

2012-11-05

Next generation sequencing technologies often require numerous primer designs that require good target coverage that can be financially costly. We aimed to develop a system that would implement primer reuse to design degenerate primers that could be designed around SNPs, thus find the fewest necessary primers and the lowest cost whilst maintaining an acceptable coverage and provide a cost effective solution. We have implemented Metropolis-Hastings Markov Chain Monte Carlo for optimizing primer reuse. We call it the Markov Chain Monte Carlo Optimized Degenerate Primer Reuse (MCMC-ODPR) algorithm. After repeating the program 1020 times to assess the variance, an average of 17.14% fewer primers were found to be necessary using MCMC-ODPR for an equivalent coverage without implementing primer reuse. The algorithm was able to reuse primers up to five times. We compared MCMC-ODPR with single sequence primer design programs Primer3 and Primer-BLAST and achieved a lower primer cost per amplicon base covered of 0.21 and 0.19 and 0.18 primer nucleotides on three separate gene sequences, respectively. With multiple sequences, MCMC-ODPR achieved a lower cost per base covered of 0.19 than programs BatchPrimer3 and PAMPS, which achieved 0.25 and 0.64 primer nucleotides, respectively. MCMC-ODPR is a useful tool for designing primers at various melting temperatures at good target coverage. By combining degeneracy with optimal primer reuse the user may increase coverage of sequences amplified by the designed primers at significantly lower costs. Our analyses showed that overall MCMC-ODPR outperformed the other primer-design programs in our study in terms of cost per covered base.

MCMC-ODPR: Primer design optimization using Markov Chain Monte Carlo sampling

PubMed Central

2012-01-01

Background Next generation sequencing technologies often require numerous primer designs that require good target coverage that can be financially costly. We aimed to develop a system that would implement primer reuse to design degenerate primers that could be designed around SNPs, thus find the fewest necessary primers and the lowest cost whilst maintaining an acceptable coverage and provide a cost effective solution. We have implemented Metropolis-Hastings Markov Chain Monte Carlo for optimizing primer reuse. We call it the Markov Chain Monte Carlo Optimized Degenerate Primer Reuse (MCMC-ODPR) algorithm. Results After repeating the program 1020 times to assess the variance, an average of 17.14% fewer primers were found to be necessary using MCMC-ODPR for an equivalent coverage without implementing primer reuse. The algorithm was able to reuse primers up to five times. We compared MCMC-ODPR with single sequence primer design programs Primer3 and Primer-BLAST and achieved a lower primer cost per amplicon base covered of 0.21 and 0.19 and 0.18 primer nucleotides on three separate gene sequences, respectively. With multiple sequences, MCMC-ODPR achieved a lower cost per base covered of 0.19 than programs BatchPrimer3 and PAMPS, which achieved 0.25 and 0.64 primer nucleotides, respectively. Conclusions MCMC-ODPR is a useful tool for designing primers at various melting temperatures at good target coverage. By combining degeneracy with optimal primer reuse the user may increase coverage of sequences amplified by the designed primers at significantly lower costs. Our analyses showed that overall MCMC-ODPR outperformed the other primer-design programs in our study in terms of cost per covered base. PMID:23126469

Packing Up for the Moon: Human Exploration Project Engineering Design Challenge. Design, Build and Evaluate. A Standards-Based Middle School Unit Guide. Engineering By Design: Advancing Technological Literacy--A Standards-Based Program Series

ERIC Educational Resources Information Center

NASA Educator Resource Center at Marshall Space Flight Center, 2007

2007-01-01

The Human Exploration Project (HEP) units have several common characteristics. All units: (1) Are based upon the Technological Literacy standards (ITEA, 2000/2002); (2) Coordinate with Science (AAAS, 1993) and Mathematics standards (NCTM, 2000); (3) Utilize a standards-based development approach (ITEA, 2005); (4) Stand alone and coordinate with…

Role Socialization: Designing a Web-Based Program to Orient New School Nurses

ERIC Educational Resources Information Center

Campbell, Tia B.

2009-01-01

Traditional orientation programs for school nurses may not meet the needs of nurses new to the specialty. In this era where technology is a major aspect of our daily lives, the Internet offers new school nurses an avenue where information can be accessed at anytime and from anyplace. This article explores a Web-based orientation program that has…

The Effectiveness of Psycho-Educational School-Based Child Sexual Abuse Prevention Training Program on Turkish Elementary Students

ERIC Educational Resources Information Center

Cecen-Erogul, Ayse Rezan; Kaf Hasirci, Ozlem

2013-01-01

In Turkey, there is neither systematic nor structured child sexual abuse prevention programs for school-aged children in school settings. The main purpose of this study was to investigate the effectiveness of a school-based child sexual abuse prevention program on elementary school (4th grade) students. Quasi-experimental design with pretest,…

What Did I Do? A Scenario-Based Program To Assist Specific Learning Disabled Adolescents in Understanding Legal Issues.

ERIC Educational Resources Information Center

McDougall, Donna M.

This practicum was designed to train eight adolescents with specific learning disabilities (SLD) about their legal rights and responsibilities, through a scenario-based program presented in the classroom as part of a transition program. The practicum involved the development of 22 scenarios, a pretest and posttest, and discussions and role-playing…

Measuring Implementation of Evidence-Based Programs Targeting Young Children at Risk for Emotional/Behavioral Disorders: Conceptual Issues and Recommendations

ERIC Educational Resources Information Center

Sutherland, Kevin S.; McLeod, Bryce D.; Conroy, Maureen A.; Cox, Julia R.

2013-01-01

Young children with and at risk for emotional/behavioral disorders (EBD) present challenges for early childhood teachers. Evidence-based programs designed to address these young children's behavior problems exist, but there are a number of barriers to implementing these programs in early childhood settings. Advancing the science of treatment…

COLE: A Web-based Tool for Interfacing with Forest Inventory Data

Treesearch

Patrick Proctor; Linda S. Heath; Paul C. Van Deusen; Jeffery H. Gove; James E. Smith

2005-01-01

We are developing an online computer program to provide forest carbon related estimates for the conterminous United States (COLE). Version 1.0 of the program features carbon estimates based on data from the USDA Forest Service Eastwide Forest Inventory database. The program allows the user to designate an area of interest, and currently provides area, growing-stock...

The Integration of Creative Drama in an Inquiry-Based Elementary Program: The Effect on Student Attitude and Conceptual Learning

ERIC Educational Resources Information Center

Hendrix, Rebecca; Eick, Charles; Shannon, David

2012-01-01

Creative drama activities designed to help children learn difficult science concepts were integrated into an inquiry-based elementary science program. Children (n = 38) in an upper elementary enrichment program at one primary school were the participants in this action research. The teacher-researcher taught students the Full Option Science…

An Investigation of the Relationship between Factors of Beginning Teachers' Development within a Mentor-Based Induction Program

ERIC Educational Resources Information Center

Davis, James Kenny

2017-01-01

This dissertation was a quantitative, correlational study that examined the impact of the mentor component of a mentor-based induction program on three factors of new teacher development and support. The focus of this study was on beginning teachers participating in a district-supported mentoring program designed to support and acclimate teachers…

How to Recognize Success and Failure: Practical Assessment of an Evolving, First-Semester Laboratory Program Using Simple, Outcome-Based Tools

ERIC Educational Resources Information Center

Gron, Liz U.; Bradley, Shelly B.; McKenzie, Jennifer R.; Shinn, Sara E.; Teague, M. Warfield

2013-01-01

This paper presents the use of simple, outcome-based assessment tools to design and evaluate the first semester of a new introductory laboratory program created to teach green analytical chemistry using environmental samples. This general chemistry laboratory program, like many introductory courses, has a wide array of stakeholders within and…

Development and Field Test of Competency Based Instructional Material for a Career Mobility Program for Licensed Practical Nurses. Final Report.

ERIC Educational Resources Information Center

Bergen Community Coll., Paramus, NJ.

The Associate Degree Nursing Program at Bergen Community College developed and field tested competency-based instructional modules in a program designed to allow licensed practical nurses to qualify to take the certification examination for registered nurses after a year of study. Thirteen licensed practical nurses were enrolled in the first class…

San Mateo County's Server Information Program (S.I.P.): A Community-Based Alcohol Server Training Program.

ERIC Educational Resources Information Center

de Miranda, John

The field of alcohol server awareness and training has grown dramatically in the past several years and the idea of training servers to reduce alcohol problems has become a central fixture in the current alcohol policy debate. The San Mateo County, California Server Information Program (SIP) is a community-based prevention strategy designed to…

A Model-Based Evaluation of a Cultural Mediator Outreach Program for HIV+ Ethiopian Immigrants in Israel.

ERIC Educational Resources Information Center

Kaplan, Edward H.; Soskolne, Varda; Adler, Bella; Leventhal, Alex; Shtarkshall, Ronny A.

2002-01-01

Conducted a model-based evaluation of a program designed to reduce HIV transmission from HIV-infected Ethiopian immigrants in Israel. Focused on pregnancy rate reduction as a measure of sexual exposure. Results for 145 female and 176 male clients in the intervention suggest reduction in unprotected sexual exposures among program participants. (SLD)

The Impact of a Community-Based Comprehensive Sex Education Program on Chinese Adolescents' Sex-Related Knowledge and Attitudes

ERIC Educational Resources Information Center

Wang, Bo; Meier, Ann; Shah, Iqbal; Li, Xiaoming

2006-01-01

The purpose of this study was to evaluate a community-based comprehensive sex education program among unmarried youth in China. The impact of the intervention on sexual knowledge, attitudes, and sexual initiation were assessed, using a pre-test post-test quasi-experimental research design. The program used six methods for providing sex-related…

A Web-Based Training Resource for Therapists to Deliver an Evidence-Based Exercise Program for Rheumatoid Arthritis of the Hand (iSARAH): Design, Development, and Usability Testing.

PubMed

Srikesavan, Cynthia Swarnalatha; Williamson, Esther; Eldridge, Lucy; Heine, Peter; Adams, Jo; Cranston, Tim; Lamb, Sarah E

2017-12-13

The Strengthening and Stretching for Rheumatoid Arthritis of the Hand (SARAH) is a tailored, progressive exercise program for people having difficulties with wrist and hand function due to rheumatoid arthritis (RA). The program was evaluated in a large-scale clinical trial and was found to improve hand function, was safe to deliver, and was cost-effective. These findings led to the SARAH program being recommended in the UK National Institute for Health and Care Excellence guidelines for the management of adults with RA. To facilitate the uptake of this evidence-based program by clinicians, we proposed a Web-based training program for SARAH (iSARAH) to educate and train physiotherapists and occupational therapists on delivering the SARAH program in their practice. The overall iSARAH implementation project was guided by the 5 phases of the analysis, design, development, implementation, and evaluation (ADDIE) system design model. The objective of our study was to conduct the first 3 phases of the model in the development of the iSARAH project. Following publication of the trial, the SARAH program materials were made available to therapists to download from the trial website for use in clinical practice. A total of 35 therapists who downloaded these materials completed an online survey to provide feedback on practice trends in prescribing hand exercises for people with RA, perceived barriers and facilitators to using the SARAH program in clinical practice, and their preferences for the content and Web features of iSARAH. The development and design of iSARAH were further guided by a team of multidisciplinary health professionals (n=17) who took part in a half-day development meeting. We developed the preliminary version of iSARAH and tested it among therapists (n=10) to identify and rectify usability issues and to produce the final version. The major recommendations made by therapists and the multidisciplinary team were having a simple Web design and layout, clear exercise pictures and videos, and compatibility of iSARAH on various browsers and devices. We rectified all usability issues in the preliminary version to develop the final version of iSARAH, which included 4 short modules and additional sections on self-assessment, frequently asked questions, and a resource library. The use of the ADDIE design model and engagement of end users in the development and evaluation phases have rendered iSARAH a convenient, easy-to-use, and effective Web-based learning resource for therapists on how to deliver the SARAH program. There is also huge potential for adapting iSARAH across different cultures and languages, thus opening more opportunities for wider uptake and application of the SARAH program into practice. ©Cynthia Swarnalatha Srikesavan, Esther Williamson, Lucy Eldridge, Peter Heine, Jo Adams, Tim Cranston, Sarah E Lamb. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 13.12.2017.

A Web-Based Training Resource for Therapists to Deliver an Evidence-Based Exercise Program for Rheumatoid Arthritis of the Hand (iSARAH): Design, Development, and Usability Testing

PubMed Central

Williamson, Esther; Eldridge, Lucy; Heine, Peter; Adams, Jo; Cranston, Tim; Lamb, Sarah E

2017-01-01

Background The Strengthening and Stretching for Rheumatoid Arthritis of the Hand (SARAH) is a tailored, progressive exercise program for people having difficulties with wrist and hand function due to rheumatoid arthritis (RA). The program was evaluated in a large-scale clinical trial and was found to improve hand function, was safe to deliver, and was cost-effective. These findings led to the SARAH program being recommended in the UK National Institute for Health and Care Excellence guidelines for the management of adults with RA. To facilitate the uptake of this evidence-based program by clinicians, we proposed a Web-based training program for SARAH (iSARAH) to educate and train physiotherapists and occupational therapists on delivering the SARAH program in their practice. The overall iSARAH implementation project was guided by the 5 phases of the analysis, design, development, implementation, and evaluation (ADDIE) system design model. Objective The objective of our study was to conduct the first 3 phases of the model in the development of the iSARAH project. Methods Following publication of the trial, the SARAH program materials were made available to therapists to download from the trial website for use in clinical practice. A total of 35 therapists who downloaded these materials completed an online survey to provide feedback on practice trends in prescribing hand exercises for people with RA, perceived barriers and facilitators to using the SARAH program in clinical practice, and their preferences for the content and Web features of iSARAH. The development and design of iSARAH were further guided by a team of multidisciplinary health professionals (n=17) who took part in a half-day development meeting. We developed the preliminary version of iSARAH and tested it among therapists (n=10) to identify and rectify usability issues and to produce the final version. Results The major recommendations made by therapists and the multidisciplinary team were having a simple Web design and layout, clear exercise pictures and videos, and compatibility of iSARAH on various browsers and devices. We rectified all usability issues in the preliminary version to develop the final version of iSARAH, which included 4 short modules and additional sections on self-assessment, frequently asked questions, and a resource library. Conclusions The use of the ADDIE design model and engagement of end users in the development and evaluation phases have rendered iSARAH a convenient, easy-to-use, and effective Web-based learning resource for therapists on how to deliver the SARAH program. There is also huge potential for adapting iSARAH across different cultures and languages, thus opening more opportunities for wider uptake and application of the SARAH program into practice. PMID:29237581

The research of .NET framework based on delegate of the LCE

NASA Astrophysics Data System (ADS)

Chen, Yi-peng

2011-10-01

Programmers realize LCE Enterprise services provided by NET framework when they develop applied VC# programming design language with component technology facing objects Lots of basic codes used to be compiled in the traditional programming design. However, nowadays this can be done just by adding corresponding character at class, interface, method, assembly with simple declarative program. This paper mainly expatiates the mechanism to realize LCE event services with delegate mode in C#. It also introduces the procedure of applying event class, event publisher, subscriber and client in LCE technology. It analyses the technology points of LCE based on delegate mode with popular language and practicing cases.

Systematic review: internet-based program for youth smoking prevention and cessation.

PubMed

Park, Eunhee; Drake, Emily

2015-01-01

To review the characteristics and effects Internet-based youth smoking prevention and cessation programs. Systematic review of published articles in peer-reviewed journals in the past 10 years, focused on Internet-based youth smoking prevention and cessation programs. Twelve articles were selected based on the following criteria: studies reporting the outcomes of Internet-based smoking cessation or prevention intervention programs for adolescents who are younger than 24 years. The components of youth Internet-based smoking intervention programs are analyzed based on study features (i.e., sample, design, theoretical basis, analysis, outcome measures) and program characteristics (i.e., focus, setting, frequency, duration, intensity, and different components) that make the programs effective. The most common components of effective Internet-based programs are identified as the following: the use of multimedia, tailored approaches, personalized feedback, and interactive features. The characteristics and effects of the programs vary, but most programs show positive results in youth smoking prevention and cessation in spite of the studies' limitations. The evidence from this review provides useful information of recent efforts related to Internet-based youth smoking prevention and cessation programs, which can have significant clinical implications in developing future innovative youth smoking prevention and intervention programs. © 2014 Sigma Theta Tau International.

Program Helps Decompose Complicated Design Problems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.

1993-01-01

Time saved by intelligent decomposition into smaller, interrelated problems. DeMAID is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Displays modules in N x N matrix format. Requires investment of time to generate and refine list of modules for input, it saves considerable amount of money and time in total design process, particularly new design problems in which ordering of modules has not been defined. Program also implemented to examine assembly-line process or ordering of tasks and milestones.

A Review of Case-Based Learning Practices in an Online MBA Program: A Program-Level Case Study

ERIC Educational Resources Information Center

Lee, Seung-hee; Lee, Jieun; Liu, Xiaojing; Bonk, Curt J.; Magjuka, Richard J.

2009-01-01

This study examines how a case-based learning approach was used and facilitated in online business education. Perceptions of students and instructors regarding the practices of case-based learning in online environments are explored in terms of instructional design, facilitation, and technology support. This study finds case-based learning to be a…

Lessons Learned From Community-Based Approaches to Sodium Reduction

PubMed Central

Kane, Heather; Strazza, Karen; Losby PhD, Jan L.; Lane, Rashon; Mugavero, Kristy; Anater, Andrea S.; Frost, Corey; Margolis, Marjorie; Hersey, James

2017-01-01

Purpose This article describes lessons from a Centers for Disease Control and Prevention initiative encompassing sodium reduction interventions in six communities. Design A multiple case study design was used. Setting This evaluation examined data from programs implemented in six communities located in New York (Broome County, Schenectady County, and New York City); California (Los Angeles County and Shasta County); and Kansas (Shawnee County). Subjects Participants (n = 80) included program staff, program directors, state-level staff, and partners. Measures Measures for this evaluation included challenges, facilitators, and lessons learned from implementing sodium reduction strategies. Analysis The project team conducted a document review of program materials and semi structured interviews 12 to 14 months after implementation. The team coded and analyzed data deductively and inductively. Results Five lessons for implementing community-based sodium reduction approaches emerged: (1) build relationships with partners to understand their concerns, (2) involve individuals knowledgeable about specific venues early, (3) incorporate sodium reduction efforts and messaging into broader nutrition efforts, (4) design the program to reduce sodium gradually to take into account consumer preferences and taste transitions, and (5) identify ways to address the cost of lower-sodium products. Conclusion The experiences of the six communities may assist practitioners in planning community-based sodium reduction interventions. Addressing sodium reduction using a community-based approach can foster meaningful change in dietary sodium consumption. PMID:24575726

Lithography-based automation in the design of program defect masks

NASA Astrophysics Data System (ADS)

Vakanas, George P.; Munir, Saghir; Tejnil, Edita; Bald, Daniel J.; Nagpal, Rajesh

2004-05-01

In this work, we are reporting on a lithography-based methodology and automation in the design of Program Defect masks (PDM"s). Leading edge technology masks have ever-shrinking primary features and more pronounced model-based secondary features such as optical proximity corrections (OPC), sub-resolution assist features (SRAF"s) and phase-shifted mask (PSM) structures. In order to define defect disposition specifications for critical layers of a technology node, experience alone in deciding worst-case scenarios for the placement of program defects is necessary but may not be sufficient. MEEF calculations initiated from layout pattern data and their integration in a PDM layout flow provide a natural approach for improvements, relevance and accuracy in the placement of programmed defects. This methodology provides closed-loop feedback between layout and hard defect disposition specifications, thereby minimizing engineering test restarts, improving quality and reducing cost of high-end masks. Apart from SEMI and industry standards, best-known methods (BKM"s) in integrated lithographically-based layout methodologies and automation specific to PDM"s are scarce. The contribution of this paper lies in the implementation of Design-For-Test (DFT) principles to a synergistic interaction of CAD Layout and Aerial Image Simulator to drive layout improvements, highlight layout-to-fracture interactions and output accurate program defect placement coordinates to be used by tools in the mask shop.

Engineering Design Education Program for Graduate School

NASA Astrophysics Data System (ADS)

Ohbuchi, Yoshifumi; Iida, Haruhiko

The new educational methods of engineering design have attempted to improve mechanical engineering education for graduate students in a way of the collaboration in education of engineer and designer. The education program is based on the lecture and practical exercises concerning the product design, and has engineering themes and design process themes, i.e. project management, QFD, TRIZ, robust design (Taguchi method) , ergonomics, usability, marketing, conception etc. At final exercise, all students were able to design new product related to their own research theme by applying learned knowledge and techniques. By the method of engineering design education, we have confirmed that graduate students are able to experience technological and creative interest.

Small, high pressure ratio compressor: Aerodynamic and mechanical design

NASA Technical Reports Server (NTRS)

Bryce, C. A.; Erwin, J. R.; Perrone, G. L.; Nelson, E. L.; Tu, R. K.; Bosco, A.

1973-01-01

The Small, High-Pressure-Ratio Compressor Program was directed toward the analysis, design, and fabrication of a centrifugal compressor providing a 6:1 pressure ratio and an airflow rate of 2.0 pounds per second. The program consists of preliminary design, detailed areodynamic design, mechanical design, and mechanical acceptance tests. The preliminary design evaluate radial- and backward-curved blades, tandem bladed impellers, impeller-and diffuser-passage boundary-layer control, and vane, pipe, and multiple-stage diffusers. Based on this evaluation, a configuration was selected for detailed aerodynamic and mechanical design. Mechanical acceptance test was performed to demonstrate that mechanical design objectives of the research package were met.

COMPUTERIZED FGD BYPRODUCT PRODUCTION AND MARKETING SYSTEM: USERS MANUAL

EPA Science Inventory

The users manual describes a computerized system--consisting of a number of integrated programs, models, and data bases--that has been developed to compare the costs of power plant strategies designed to meet clean air regulations. It describes the data bases, programs, and proce...

Examining a Program Designed to Improve Supervisory Knowledge and Practices of Cooperating Teachers

ERIC Educational Resources Information Center

Erbilgin, Evrim

2014-01-01

This article reports on how a program based on educative supervision supported the supervisory knowledge and practices of three cooperating teachers. The program was planned as a kind of practicum: the cooperating teachers participated in the program while working with a student teacher. The program included activities where the cooperating…

Introduction to Carpentry. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of carpentry is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Introduction to Bricklaying. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of bricklaying is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Evaluating the implementation and impacts of middle grades inquiry-based engineering design modules

NASA Astrophysics Data System (ADS)

Harlan, Jessica M.

This dissertation uses a format where I present and discuss three articles that were written in conjunction with my work on a research and evaluation team. The articles are based on a multi-year project researching and evaluating the design, development, and implementation of a middle grades integrated Science, Technology, Engineering, and Mathematics (STEM) program. Each of the articles demonstrates the complexity in researching and evaluating curricular development in multifaceted, rapidly changing environments. While the focus of each article differs, they all examine research and evaluation in the context of the design and development of middle grades engineering-design modules. The selected articles address challenges associated with assessing program objectives and evaluating program quality in complex education programs.The first article, presented in Chapter 2, provides an overview of the nature of the EYE program and examines the extent to which participation in the EYE program resulted in the achievement of program objectives. There is evidence that EYE Module participation has a positive impact on participating students as well as teachers. This study also revealed challenges associated with determining the impact of program participation simultaneously with program revisions and assessment development. The second article, presented in Chapter 3, examined the evaluation of fidelity of implementation of inquiry-oriented educational programs. This article was intended to examine one way of triangulating information to determine fidelity while considering variation in implementation consistent with program theories of learning. When applying this model to implementation of the EYE program, we found many teachers were implementing the modules with low to moderate fidelity, especially math teachers. The third article, presented in Chapter 4, examined the factor structure of an occupational values scale intended to measure student interest in STEM careers. When reviewing the assessment's evidence base, we found no published literature regarding the assessment's psychometric properties. We found that the AWE Work Values scale assesses two separate sets of occupational values: 1) using analytical and problem solving skills and 2) personal satisfaction. In Chapter 5, I discuss the implications of the research presented in these articles to the field of integrated STEM. This includes a need to further develop and test tools and methods for measuring program impact. While the articles address several issues related to research and evaluation within the context of K-12 integrated STEM education, the concepts and implications also apply to the general field of instructional design. The primary lesson is the need to systematically evaluate designed instruction, including measuring fidelity of implementation and designing evaluations in advance to ensure appropriate data are gathered. Recommendations for future research include identification of common outcomes for integrated STEM, psychometric testing of integrated STEM attitude measures, impacts of other factors such as interest in STEM, and development and testing of instructional design models for integrated STEM.

Estimating Impacts on Students, Teachers, and Schools of Programs Targeted for Preschool through Transition to College--Lessons for Methodologists from the Designs of 117 Evaluations Being Conducted in the Investing in Innovation Fund (i3) Grant Program.

ERIC Educational Resources Information Center

Price, Cristofer; Wolf, Anne; Goodson, Barbara; Boulay, Beth

2015-01-01

When presenting results from rigorous, field-based evaluations of educational interventions, researchers often reveal methodological barriers they face in designing studies to assessing program effectiveness. The evaluations funded by the Investing in Innovation Fund (i3) present a timely opportunity for identifying relevant and pressing issues…

Design knowledge capture for a corporate memory facility

NASA Technical Reports Server (NTRS)

Boose, John H.; Shema, David B.; Bradshaw, Jeffrey M.

1990-01-01

Currently, much of the information regarding decision alternatives and trade-offs made in the course of a major program development effort is not represented or retained in a way that permits computer-based reasoning over the life cycle of the program. The loss of this information results in problems in tracing design alternatives to requirements, in assessing the impact of change in requirements, and in configuration management. To address these problems, the problem was studied of building an intelligent, active corporate memory facility which would provide for the capture of the requirements and standards of a program, analyze the design alternatives and trade-offs made over the program's lifetime, and examine relationships between requirements and design trade-offs. Early phases of the work have concentrated on design knowledge capture for the Space Station Freedom. Tools are demonstrated and extended which helps automate and document engineering trade studies, and another tool is being developed to help designers interactively explore design alternatives and constraints.

Software-Based Visual Loan Calculator For Banking Industry

NASA Astrophysics Data System (ADS)

Isizoh, A. N.; Anazia, A. E.; Okide, S. O. 3; Onyeyili, T. I.; Okwaraoka, C. A. P.

2012-03-01

industry is very necessary in modern day banking system using many design techniques for security reasons. This paper thus presents the software-based design and implementation of a Visual Loan calculator for banking industry using Visual Basic .Net (VB.Net). The fundamental approach to this is to develop a Graphical User Interface (GUI) using VB.Net operating tools, and then developing a working program which calculates the interest of any loan obtained. The VB.Net programming was done, implemented and the software proved satisfactory.

A large-scale initiative to disseminate an evidence-based drug abuse prevention program in Italy: Lessons learned for practitioners and researchers.

PubMed

Velasco, Veronica; Griffin, Kenneth W; Antichi, Mariella; Celata, Corrado

2015-10-01

Across developed countries, experimentation with alcohol, tobacco, and other drugs often begins in the early adolescent years. Several evidence-based programs have been developed to prevent adolescent substance use. Many of the most rigorously tested and empirically supported prevention programs were initially developed and tested in the United States. Increasingly, these interventions are being adopted for use in Europe and throughout the world. This paper reports on a large-scale comprehensive initiative designed to select, adapt, implement, and sustain an evidence-based drug abuse prevention program in Italy. As part of a large-scale regionally funded collaboration in the Lombardy region of Italy, we report on processes through which a team of stakeholders selected, translated and culturally adapted, planned, implemented and evaluated the Life Skills Training (LST) school-based drug abuse prevention program, an evidence-based intervention developed in the United States. We discuss several challenges and lessons learned and implications for prevention practitioners and researchers attempting to undertake similar international dissemination projects. We review several published conceptual models designed to promote the replication and widespread dissemination of effective programs, and discuss their strengths and limitations in the context of planning and implementing a complex, large-scale real-world dissemination effort. Copyright © 2015 Elsevier Ltd. All rights reserved.

Skylab: A guidebook

NASA Technical Reports Server (NTRS)

Belew, L. F.; Stuhlinger, E.

1973-01-01

A description of the history and development of the Skylab program is presented. Mission objectives, launch preparations, and crew activities and training program are outlined. Skylab design and operation are presented, and research programs on Skylab are described along with ground-based supporting projects.

Science Faculty Belief Systems in a Professional Development Program: Inquiry in College Laboratories

NASA Astrophysics Data System (ADS)

Hutchins, Kristen L.; Friedrichsen, Patricia J.

2012-12-01

The purpose of this study was to investigate how science faculty members' belief systems about inquiry-based teaching changed through their experience in a professional development program. The program was designed to support early career science faculty in learning about inquiry and incorporating an inquiry-based approach to teaching laboratories. Data sources for this qualitative study included three semi-structured interviews, observations during the program and during faculty members' implementation in their courses, and a researcher's journal. In the first phase of data analysis, we created profiles for each of the four participants. Next, we developed assertions, and tested for confirming and disconfirming evidence across the profiles. The assertions indicated that, through the professional development program, participants' knowledge and beliefs about inquiry-based teaching shifted, placing more value on student-directed learning and classroom inquiry. Participants who were internally motivated to participate and held incoming positive attitudes toward the mini-journal inquiry-based approach were more likely to incorporate the approach in their future practice. Students' responses played a critical role in participants' belief systems and their decision to continue using the inquiry-based format. The findings from this study have implications for professional development design.

AST Composite Wing Program: Executive Summary

NASA Technical Reports Server (NTRS)

Karal, Michael

2001-01-01

The Boeing Company demonstrated the application of stitched/resin infused (S/RFI) composite materials on commercial transport aircraft primary wing structures under the Advanced Subsonic technology (AST) Composite Wing contract. This report describes a weight trade study utilizing a wing torque box design applicable to a 220-passenger commercial aircraft and was used to verify the weight savings a S/RFI structure would offer compared to an identical aluminum wing box design. This trade study was performed in the AST Composite Wing program, and the overall weight savings are reported. Previous program work involved the design of a S/RFI-base-line wing box structural test component and its associated testing hardware. This detail structural design effort which is known as the "semi-span" in this report, was completed under a previous NASA contract. The full-scale wing design was based on a configuration for a MD-90-40X airplane, and the objective of this structural test component was to demonstrate the maturity of the S/RFI technology through the evaluation of a full-scale wing box/fuselage section structural test. However, scope reductions of the AST Composite Wing Program pre-vented the fabrication and evaluation of this wing box structure. Results obtained from the weight trade study, the full-scale test component design effort, fabrication, design development testing, and full-scale testing of the semi-span wing box are reported.

Space Station - An integrated approach to operational logistics support

NASA Technical Reports Server (NTRS)

Hosmer, G. J.

1986-01-01

Development of an efficient and cost effective operational logistics system for the Space Station will require logistics planning early in the program's design and development phase. This paper will focus on Integrated Logistics Support (ILS) Program techniques and their application to the Space Station program design, production and deployment phases to assure the development of an effective and cost efficient operational logistics system. The paper will provide the methodology and time-phased programmatic steps required to establish a Space Station ILS Program that will provide an operational logistics system based on planned Space Station program logistics support.

A CONTROLLED EVALUATION OF A HIGH SCHOOL BIOMEDICAL PIPELINE PROGRAM: DESIGN AND METHODS

PubMed Central

Winkleby, Marilyn A.; Ned, Judith; Ahn, David; Koehler, Alana; Fagliano, Kathleen; Crump, Casey

2013-01-01

Given limited funding for school-based science education, non-school-based programs have been developed at colleges and universities to increase the number of students entering science- and health-related careers and address critical workforce needs. However, few evaluations of such programs have been conducted. We report the design and methods of a controlled trial to evaluate the Stanford Medical Youth Science Program’s Summer Residential Program (SRP), a 25-year-old university-based biomedical pipeline program. This 5-year matched cohort study uses an annual survey to assess educational and career outcomes among four cohorts of students who participate in the SRP and a matched comparison group of applicants who were not chosen to participate in the SRP. Matching on sociodemographic and academic background allows control for potential confounding. This design enables the testing of whether the SRP has an independent effect on educational- and career-related outcomes above and beyond the effects of other factors such as gender, ethnicity, socioeconomic background, and pre-intervention academic preparation. The results will help determine which curriculum components contribute most to successful outcomes and which students benefit most. After 4 years of follow-up, the results demonstrate high response rates from SRP participants and the comparison group with completion rates near 90%, similar response rates by gender and ethnicity, and little attrition with each additional year of follow-up. This design and methods can potentially be replicated to evaluate and improve other biomedical pipeline programs, which are increasingly important for equipping more students for science- and health-related careers. PMID:24563603

Application programs written by using customizing tools of a computer-aided design system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, X.; Huang, R.; Juricic, D.

1995-12-31

Customizing tools of Computer-Aided Design Systems have been developed to such a degree as to become equivalent to powerful higher-level programming languages that are especially suitable for graphics applications. Two examples of application programs written by using AutoCAD`s customizing tools are given in some detail to illustrate their power. One tool uses AutoLISP list-processing language to develop an application program that produces four views of a given solid model. The other uses AutoCAD Developmental System, based on program modules written in C, to produce an application program that renders a freehand sketch from a given CAD drawing.

Modeling and Analysis of Power Processing Systems (MAPPS), initial phase 2

NASA Technical Reports Server (NTRS)

Yu, Y.; Lee, F. C.; Wangenheim, H.; Warren, D.

1977-01-01

The overall objective of the program is to provide the engineering tools to reduce the analysis, design, and development effort, and thus the cost, in achieving the required performances for switching regulators and dc-dc converter systems. The program was both tutorial and application oriented. Various analytical methods were described in detail and supplemented with examples, and those with standardization appeals were reduced into computer-based subprograms. Major program efforts included those concerning small and large signal control-dependent performance analysis and simulation, control circuit design, power circuit design and optimization, system configuration study, and system performance simulation. Techniques including discrete time domain, conventional frequency domain, Lagrange multiplier, nonlinear programming, and control design synthesis were employed in these efforts. To enhance interactive conversation between the modeling and analysis subprograms and the user, a working prototype of the Data Management Program was also developed to facilitate expansion as future subprogram capabilities increase.

Adopting an Evidence-Based Lifestyle Physical Activity Program: Dissemination Study Design and Methods.

PubMed

Dunn, Andrea L; Buller, David B; Dearing, James W; Cutter, Gary; Guerra, Michele; Wilcox, Sara; Bettinghaus, Erwin P

2012-06-01

BACKGROUND: There is a scarcity of research studies that have examined academic-commercial partnerships to disseminate evidence-based physical activity programs. Understanding this approach to dissemination is essential because academic-commercial partnerships are increasingly common. Private companies have used dissemination channels and strategies to a degree that academicians have not, and declining resources require academicians to explore these partnerships. PURPOSE: This paper describes a retrospective case-control study design including the methods, demographics, organizational decision-making, implementation rates, and marketing strategy for Active Living Every Day (ALED), an evidence-based lifestyle physical activity program that has been commercially available since 2001. Evidence-based public health promotion programs rely on organizations and targeted sectors to disseminate these programs although relatively little is known about organizational-level and sector-level influences that lead to their adoption and implementation. METHODS: Cases (n=154) were eligible if they had signed an ALED license agreement with Human Kinetics (HK), publisher of the program's textbooks and facilitator manuals, between 2001 and 2008. Two types of controls were matched (2:2:1) and stratified by sector and region. Active controls (Control 1; n=319) were organizations that contacted HK to consider adopting ALED. Passive controls (Control 2; n=328) were organizations that received unsolicited marketing materials and did not initiate contact with HK. We used Diffusion of Innovations Theory (DIT) constructs as the basis for developing the survey of cases and controls. RESULTS: Using the multi-method strategy recommended by Dillman, a total of n=801 cases and controls were surveyed. Most organizations were from the fitness sector followed by medical, nongovernmental, governmental, educational, worksite and other sectors with significantly higher response rates from government, educational and medical sectors compared with fitness and other sectors, (p=0.02). More cases reported being involved in the decision to adopt ALED (p<0.0001). Data indicate that a low percentage of controls had ever heard of ALED despite repeated marketing and offering other types of physical activity programs and services. Finally, slightly over half of the adopters reported they had actually implemented the ALED program. CONCLUSION: Dissemination research requires new perspectives and designs to produce valid insights about the results of dissemination efforts. This study design, survey methods and theoretically-based questions can serve as a useful model for other evidence-based public health interventions that are marketed by commercial publishers to better understand key issues related to adoption and implementation of evidence-based programs.

ACOUSTIC LINERS FOR TURBOFAN ENGINES

NASA Technical Reports Server (NTRS)

Minner, G. L.

1994-01-01

This program was developed to design acoustic liners for turbofan engines. This program combines results from theoretical models of wave alternation in acoustically treated passages with experimental data from full-scale fan noise suppressors. By including experimentally obtained information, the program accounts for real effects such as wall boundary layers, duct terminations, and sound modal structure. The program has its greatest use in generating a number of design specifications to be used for evaluation of trade-offs. The program combines theoretical and empirical data in designing annular acoustic liners. First an estimate of the noise output of the fan is made based on basic fan aerodynamic design variables. Then, using a target noise spectrum after alternation and the estimated fan noise spectrum, a design spectrum is calculated as their difference. Next, the design spectrum is combined with knowledge of acoustic liner performance and the liner design variables to specify the acoustic design. Details of the liner design are calculated by combining the required acoustic impedance with a mathematical model relating acoustic impedance to the physical structure of the liner. Input to the noise prediction part of the program consists of basic fan operating parameters, distance that the target spectrum is to be measured and the target spectrum. The liner design portion of the program requires the required alternation spectrum, desired values of length to height and several option selection parameters. Output from the noise prediction portion is a noise spectrum consisting of discrete tones and broadband noise. This may be used as input to the liner design portion of the program. The liner design portion of the program produces backing depths, open area ratios, and face plate thicknesses. This program is written in FORTRAN V and has been implemented in batch mode on a UNIVAC 1100 series computer with a central memory requirement of 12K (decimal) of 36 bit words.

Home-based bimanual training based on motor learning principles in children with unilateral cerebral palsy and their parents (the COAD-study): rationale and protocols.

PubMed

Schnackers, Marlous; Beckers, Laura; Janssen-Potten, Yvonne; Aarts, Pauline; Rameckers, Eugène; van der Burg, Jan; de Groot, Imelda; Smeets, Rob; Geurts, Sander; Steenbergen, Bert

2018-04-18

Home-based training is considered an important intervention in rehabilitation of children with unilateral cerebral palsy. Despite consensus on the value of home-based upper limb training, no evidence-based best practice exists. Promoting compliance of children to adhere to an intensive program while keeping parental stress levels low is an important challenge when designing home-based training programs. Incorporating implicit motor learning principles emerges to be a promising method to resolve this challenge. Here we describe two protocols for home-based bimanual training programs, one based on implicit motor learning principles and one based on explicit motor learning principles, for children with unilateral spastic cerebral palsy aged 2 through 7 years. Children receive goal-oriented, task-specific bimanual training in their home environment from their parents for 3.5 h/week for 12 weeks according to an individualized program. Parents will be intensively coached by a multidisciplinary team, consisting of a pediatric therapist and remedial educationalist. Both programs consist of a preparation phase (goal setting, introductory meetings with coaching professionals, design of individualized program, instruction of parents, home visit) and home-based training phase (training, video-recordings, registrations, and telecoaching and home visits by the coaching team). The programs contrast with respect to the teaching strategy, i.e. how the parents support their child during training. In both programs parents provide their child with instructions and feedback that focus on the activity (i.e. task-oriented) or the result of the activity (i.e. result-oriented). However, in the explicit program parents are in addition instructed to give exact instructions and feedback on the motor performance of the bimanual activities, whereas in the implicit program the use of both hands and the appropriate motor performance of the activity are elicited via manipulation of the organization of the activities. With the protocols described here, we aim to take a next step in the development of much needed evidence-based home-based training programs for children with unilateral cerebral palsy.

Reference Models for Structural Technology Assessment and Weight Estimation

NASA Technical Reports Server (NTRS)

Cerro, Jeff; Martinovic, Zoran; Eldred, Lloyd

2005-01-01

Previously the Exploration Concepts Branch of NASA Langley Research Center has developed techniques for automating the preliminary design level of launch vehicle airframe structural analysis for purposes of enhancing historical regression based mass estimating relationships. This past work was useful and greatly reduced design time, however its application area was very narrow in terms of being able to handle a large variety in structural and vehicle general arrangement alternatives. Implementation of the analysis approach presented herein also incorporates some newly developed computer programs. Loft is a program developed to create analysis meshes and simultaneously define structural element design regions. A simple component defining ASCII file is read by Loft to begin the design process. HSLoad is a Visual Basic implementation of the HyperSizer Application Programming Interface, which automates the structural element design process. Details of these two programs and their use are explained in this paper. A feature which falls naturally out of the above analysis paradigm is the concept of "reference models". The flexibility of the FEA based JAVA processing procedures and associated process control classes coupled with the general utility of Loft and HSLoad make it possible to create generic program template files for analysis of components ranging from something as simple as a stiffened flat panel, to curved panels, fuselage and cryogenic tank components, flight control surfaces, wings, through full air and space vehicle general arrangements.

Doorways I: Student Training Manual on School-Related Gender-Based Violence Prevention and Response

ERIC Educational Resources Information Center

US Agency for International Development, 2009

2009-01-01

The Doorways training program was designed by the U.S. Agency for International Development (USAID)-funded Safe Schools Program (Safe Schools) to enable teachers, community members and students to prevent and respond to school-related gender-based violence (SRGBV). "Doorways I: Student Training Manual on School-Related Gender-Based Violence…

Developing Knowledgeable Teachers: A Framework for Standards-Based Teacher Education Supported by Institutional Collaboration. The STEP Reports.

ERIC Educational Resources Information Center

Garvin, Patty, Ed.

This collection of papers describes the process of creating a standards-based teacher education program through strong collaboration among arts and science, education, and P-12 faculty members and administrators. The Standards-based Teacher Education Project (STEP) was designed to help teacher education programs ensure that their graduates know…

Introduction to Drywall. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of drywall is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind.…

Variables Affecting the Success of Alternative School Programs in Mississippi

ERIC Educational Resources Information Center

Haley, Sherlyn Williams

2009-01-01

This study focused on examining the effect of two alternative school types on student success in Mississippi. To determine alternative school type, alternative program directors self-reported program design, and schools were divided into two groups. Type I schools were defined as "punitive-based" programs in which students receive…

78 FR 20411 - Supplemental Nutrition Assistance Program: Nutrition Education and Obesity Prevention Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

..., multi- level interventions; and community and public health approaches. To improve program design... prevention services and an evidence-based approach are provided for States to use in their SNAP-Ed programming. These definitions provide States with greater flexibility to include environmental approaches and...

School-Based Peer Mentoring in High School: A Program Evaluation Study

ERIC Educational Resources Information Center

Cooper, Felicia Cecile

2017-01-01

The dissertation is an initial investigation of a peer mentoring program in a suburban high school in the southeastern United States. Additionally, the Peer Mentoring Program (PMP) study examined whether the Program improves academic performance and attendance, and decreases referrals. Utilizing an experimental design, a Participant and a…

Examining the Role of Multicultural Competence in Leadership Program Design

ERIC Educational Resources Information Center

Wilson, Amy B.

2015-01-01

Research examining the multicultural competence of leadership educators across a variety of institutions demonstrated variance based on leadership program structure, program elements, and the ways in which diversity was addressed in the program. The Multicultural Competence in Student Affairs-Preliminary 2 (MCSA-P2) scale was used to measure…

Fundamentals of Construction. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide begins the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind. This guide contains 3 sections and 15…

Introduction to Plumbing. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of plumbing is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind.…

Introduction to Sheet Metal. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of sheet metal is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Enhancing organizational capacity to provide cancer control programs among Latino churches: design and baseline findings of the CRUZA Study.

PubMed

Allen, Jennifer D; Torres, Maria Idali; Tom, Laura S; Rustan, Sarah; Leyva, Bryan; Negron, Rosalyn; Linnan, Laura A; Jandorf, Lina; Ospino, Hosffman

2015-04-09

Faith-based organizations (FBOs) have been successful in delivering health promotion programs for African Americans, though few studies have been conducted among Latinos. Even fewer have focused on organizational change, which is required to sustain community-based initiatives. We hypothesized that FBOs serving Latinos would be more likely to offer evidence-based strategies (EBS) for cancer control after receiving a capacity enhancement intervention to implement health programs, and designed the CRUZA trial to test this hypothesis. This paper describes the CRUZA design and baseline findings. We identified Catholic parishes in Massachusetts that provided Spanish-language mass (n = 65). A baseline survey assessed organizational characteristics relevant to adoption of health programs, including readiness for adoption, "fit" between innovation and organizational mission, implementation climate, and organizational culture. In the next study phase, parishes that completed the baseline assessment will be recruited to a randomized cluster trial, with the parish as the unit of analysis. Both groups will receive a Program Manual and Toolkit. Capacity Enhancement parishes will also be offered technical support, assistance forming health committees and building inter-institutional partnerships, and skills-based training. Of the 49 parishes surveyed at baseline (75%), one-third (33%) reported having provided at least one health program in the prior year. However, only two program offerings were cancer-specific. Nearly one-fifth (18%) had an active health ministry. There was a high level of organizational readiness to adopt cancer control programs, high congruence between parish missions and CRUZA objectives, moderately conducive implementation climates, and organizational cultures supportive of CRUZA programming. Having an existing health ministry was significantly associated with having offered health programs within the past year. Relationships between health program offerings and other organizational characteristics were not statistically significant. Findings suggest that many parishes do not offer cancer control programs, yet many may be ready to do so. However, the perceptions about existing organizational practices and policies may not be conducive to program initiation. A capacity enhancement intervention may hold promise as a means of increasing health programming. The efficacy of such an intervention will be tested in phase two of this study.

A landholder-based approach to the design of private-land conservation programs.

PubMed

Moon, Katie; Cocklin, Chris

2011-06-01

Many ecosystems exist primarily, or solely, on privately owned (freehold) or managed (leasehold) land. In rural and semirural areas, local and regional government agencies are commonly responsible for encouraging landholders to conserve native vegetation and species on these private properties. Yet these agencies often lack the capacity to design and implement conservation programs tailored to rural and semirural landholdings and instead offer one program to all landholders. Landholders may elect not to participate because the program is irrelevant to their property or personal needs; consequently, vegetation-retention objectives may not be achieved. We differentiated landholders in Queensland, Australia, according to whether they derived income from the land (production landholders) or not (nonproduction landholders). We compared these two groups to identify similarities and differences that may inform the use of policy instruments (e.g., voluntary, economic, and regulatory) in conservation program design. We interviewed 45 landholders participating in three different conservation agreement programs (price-based rate [property tax] rebate; market-based tender; and voluntary, permanent covenant). Production landholders were more likely to participate in short-term programs that offered large financial incentives that applied to <25% of their property. Nonproduction landholders were more likely to participate in long-term programs that were voluntary or offered small financial incentives that applied to >75% of their property. These results may be explained by significant differences in the personal circumstances of production and nonproduction landholders (income, education, health) and differences in their norms (beliefs about how an individual is expected to act) and attitudes. Knowledge of these differences may allow for development of conservation programs that better meet the needs of landholders and thus increase participation in conservation programs and retention of native vegetation. ©2011 Society for Conservation Biology.

An Instruction Support System for Competency-Based Programs.

ERIC Educational Resources Information Center

Singh, Jane M.; And Others

This report discusses the Pennsylvania State University Instruction Support System (ISS) designed to meet the needs of large classes for competency-based teacher education (CBTE) programs. The ISS seven-step hierarchical developmental procedure is reported to free the instructor for specialized instruction and evaluation by utilizing a…

Teaching Evidence-Based Medicine: A Regional Dissemination Model.

ERIC Educational Resources Information Center

Leipzig, Rosanne M.; Wallace, Eleanor Z.; Smith, Lawrence G.; Sullivant, Jean; Dunn, Kathel; McGinn, Thomas

2003-01-01

Described and evaluated an interactive course designed to create a cadre of medical school faculty in New York who could integrate evidence-based medicine into their training programs. Findings for representatives of 30 internal medicine residency programs show the usefulness of the regional dissemination model used. (SLD)

Competency Based Competitive Events. Integrating DECA into the DE Instructional Program.

ERIC Educational Resources Information Center

Cosgrove, Glenna; Moore, Harold W.

Designed to be integrated into a competency-based distributive education program, these competitive DECA (Distributive Education Clubs of America) events were developed, utilized, and evaluated by distributive education and cooperative education coordinators in Arkansas. These events are organized under the following occupational categories: food…

Improving Defense Acquisition Management and Policy Through a Life-Cycle Affordability Framework

DTIC Science & Technology

2014-02-04

substrates based on gender, culture, and propensity. Four Design a neurofeedback -based training program that will produce changes in neuronal substrates...Validate the training program by iterating Step 3 until the desired behavioral outcome is achieved. Confirm that the neurofeedback creates desired

Management of Computer-Based Instruction: Design of an Adaptive Control Strategy.

ERIC Educational Resources Information Center

Tennyson, Robert D.; Rothen, Wolfgang

1979-01-01

Theoretical and research literature on learner, program, and adaptive control as forms of instructional management are critiqued in reference to the design of computer-based instruction. An adaptive control strategy using an online, iterative algorithmic model is proposed. (RAO)

What can the past of pay-for-performance tell us about the future of Value-Based Purchasing in Medicare?

PubMed

Ryan, Andrew M; Damberg, Cheryl L

2013-06-01

The Medicare program has implemented pay-for-performance (P4P), or Value-Based Purchasing, for inpatient care and for Medicare Advantage plans, and plans to implement a program for physicians in 2015. In this paper, we review evidence on the effectiveness of P4P and identify design criteria deemed to be best practice in P4P. We then assess the extent to which Medicare's existing and planned Value-Based Purchasing programs align with these best practices. Of the seven identified best practices in P4P program design, the Hospital Value-Based Purchasing program is strongly aligned with two of the best practices, moderately aligned with three, weakly aligned with one, and has unclear alignment with one best practice. The Physician Value-Based Purchasing Modifier is strongly aligned with two of the best practices, moderately aligned with one, weakly aligned with three, and has unclear alignment with one of the best practices. The Medicare Advantage Quality Bonus Program is strongly aligned with four of the best practices, moderately aligned with two, and weakly aligned with one of the best practices. We identify enduring gaps in P4P literature as it relates to Medicare's plans for Value-Based Purchasing and discuss important issues in the future of these implementations in Medicare. Copyright © 2013 Elsevier Inc. All rights reserved.

NASA wiring for space applications program test results

NASA Astrophysics Data System (ADS)

Stavnes, Mark; Hammoud, Ahmad

1995-11-01

The electrical power wiring tests results from the NASA Wiring for Space Applications program are presented. The goal of the program was to develop a base for the building of a lightweight, arc track-resistant electrical wiring system for aerospace applications. This new wiring system would be applied to such structures as pressurized modules, trans-atmospheric vehicles, LEO/GEO environments, and lunar and Martian environments. Technological developments from this program include the fabrication of new insulating materials, the production of new wiring constructions, an improved system design, and an advanced circuit protection design.

What Is Design-Based Causal Inference for RCTs and Why Should I Use It? NCEE 2017-4025

ERIC Educational Resources Information Center

Schochet, Peter Z.

2017-01-01

Design-based methods have recently been developed as a way to analyze data from impact evaluations of interventions, programs, and policies. The impact estimators are derived using the building blocks of experimental designs with minimal assumptions, and have good statistical properties. The methods apply to randomized controlled trials (RCTs) and…

A data dictionary approach to multilingual documentation and decision support for the diagnosis of acute abdominal pain. (COPERNICUS 555, an European concerted action).

PubMed

Ohmann, C; Eich, H P; Sippel, H

1998-01-01

This paper describes the design and development of a multilingual documentation and decision support system for the diagnosis of acute abdominal pain. The work was performed within a multi-national COPERNICUS European concerted action dealing with information technology for quality assurance in acute abdominal pain in Europe (EURO-AAP, 555). The software engineering was based on object-oriented analysis design and programming. The program cover three modules: a data dictionary, a documentation program and a knowledge based system. National versions of the software were provided and introduced into 16 centers from Central and Eastern Europe. A prospective data collection was performed in which 4020 patients were recruited. The software design has been proven to be very efficient and useful for the development of multilingual software.

The Evolution of an Innovative Community-Engaged Health Navigator Program to Address Social Determinants of Health.

PubMed

Page-Reeves, Janet; Moffett, Maurice L; Steimel, Leah; Smith, Daryl T

Health navigators and other types of community health workers (CHWs) have become recognized as essential components of quality care, and key for addressing health disparities owing to the complex health care services landscape presents almost insurmountable challenges for vulnerable individuals. Bernalillo County, New Mexico, has high rates of uninsurance, poverty, and food insecurity. The design of the Pathways to a Healthy Bernalillo County Program (BP) has evolved innovations that are unique in terms of program stability and security, expansive reach, and community capacity across six domains: sustainable public mechanism for program funding, involvement of community organizations in designing the program, expanded focus to address the broader social determinants of health with targeted outreach, an integrated, community-based implementation structure, an outcomes-based payment structure, and using an adaptive program design that actively incorporates navigators in the process. In 2008, the Pathways to a Healthy Bernalillo County Program (BP), located in the Albuquerque metropolitan area in central New Mexico, was established to provide navigation and support for the most vulnerable county residents. BP is funded through a 1% carve out of county mill levy funds. The pathways model is an outcome-based approach for health and social services coordination that uses culturally competent CHW as "navigators" trained to connect at-risk individuals to needed health and social services. One of the important innovations of the pathways approach is a shift in focus from merely providing discrete services to confirming healthy outcomes for the individual patient.

Study of the National Science Foundation's South Pole Station as an analogous data base for the logistical support of a Moon laboratory

NASA Technical Reports Server (NTRS)

Hickam, H. H., Jr.

1993-01-01

The day will come when the United States will want to return to the Earth's Moon. When that occurs, NASA may look to the Apollo program for technical and inspirational guidance. The Apollo program, however, was designed to be an end to itself--the landing of a man on the Moon and his return safely within the decade of the 1960's. When that was accomplished, the program folded because it was not self-sustaining. The next time we return to the Moon, we should base our planning on a program that is designed to be a sustained effort for an indefinite period. It is the thrust of this report that the South Pole Station of the National Science Foundation can be used to develop analogs for the construction, funding, and logistical support of a lunar base. Other analogs include transportation and national efforts versus international cooperation. A recommended lunar base using the South Pole Station as inspiration is provided, as well as details concerning economical construction of the base over a 22-year period.

Developmental issues in school-based aggression prevention from a social-cognitive perspective.

PubMed

Boxer, Paul; Goldstein, Sara E; Musher-Eizenman, Dara; Dubow, Eric F; Heretick, Donna

2005-09-01

Contemporary research on the development and prevention of aggressive behavior in childhood and adolescence emphasizes the importance of social-cognitive factors such as perceptual biases, problem-solving skills, and social-moral beliefs in the maintenance of aggression. Indeed, school-based social-cognitive intervention approaches have been identified as best practices by the Centers for Disease Control and Prevention. However, because child age is an important covariate of both intervention effectiveness and social-cognitive ability, school-based prevention program designers should keep in mind a number of issues identified through developmental research. In this paper, we review the social-cognitive model of aggressive behavior development as applied to prevention programming. We then discuss some of the ways in which the broader developmental research base can inform the design of aggression prevention programs. EDITORS' STRATEGIC IMPLICATIONS: Educational administrators and policy makers will find evidence in this review that school-based programs that employ a social-cognitive model represent a strategy that works for preventing violence. Prevention researchers will also benefit from the authors' insights regarding theoretical mediating processes and the importance of a developmental view.

Computer program determines chemical equilibria in complex systems

NASA Technical Reports Server (NTRS)

Gordon, S.; Zeleznik, F. J.

1966-01-01

Computer program numerically solves nonlinear algebraic equations for chemical equilibrium based on iteration equations independent of choice of components. This program calculates theoretical performance for frozen and equilibrium composition during expansion and Chapman-Jouguet flame properties, studies combustion, and designs hardware.

Functional and space programming.

PubMed

Hayward, C

1988-01-01

In this article, the author expands the earlier stated case for functional and space programming based on objective evidence of user needs. It provides an in-depth examination of the logic and processes of programming as a continuum which precedes, then parallels, architectural design.

Goal-Based Learning: Conceptual Design "Jump-Start" Workbook.

ERIC Educational Resources Information Center

Montgomery, Joel R.

This workbook explains the process of using the goal-based learning (GBL) approach to accelerating performance change to design an education or training program. The first half of the workbook, which focuses on the nature and benefits of GBL, discusses the following topics: shifting the focus of education; differences between lecture-based and…

The Validity of the Comparative Interrupted Time Series Design for Evaluating the Effect of School-Level Interventions.

PubMed

Jacob, Robin; Somers, Marie-Andree; Zhu, Pei; Bloom, Howard

2016-06-01

In this article, we examine whether a well-executed comparative interrupted time series (CITS) design can produce valid inferences about the effectiveness of a school-level intervention. This article also explores the trade-off between bias reduction and precision loss across different methods of selecting comparison groups for the CITS design and assesses whether choosing matched comparison schools based only on preintervention test scores is sufficient to produce internally valid impact estimates. We conduct a validation study of the CITS design based on the federal Reading First program as implemented in one state using results from a regression discontinuity design as a causal benchmark. Our results contribute to the growing base of evidence regarding the validity of nonexperimental designs. We demonstrate that the CITS design can, in our example, produce internally valid estimates of program impacts when multiple years of preintervention outcome data (test scores in the present case) are available and when a set of reasonable criteria are used to select comparison organizations (schools in the present case). © The Author(s) 2016.

[Effects of community-based comprehensive fall prevention program on muscle strength, postural balance and fall efficacy in elderly people].

PubMed

Bae, Jeongyee; Cho, Seong Il

2014-12-01

The purposes of this study was to develop a comprehensive community-based fall prevention program and to test the effects of the program on the muscle strength, postural balance and fall efficacy for elderly people. The design of this study was a nonequivalent control group pretest-posttest design. There were 28 participants in the experimental group and 29 in the control group. The program consisted of balance exercises, elastic resistance exercises and prevention education. The program was provided five times a week for 8 weeks and each session lasted 90 minutes. Data were analyzed using χ²-test, independent t-test and paired t-test using the SPSS program. Muscle strength of the lower extremities, postural balance and fall efficacy scores significantly improved in the experimental group compared to the control group. These results suggest that this program can improve lower extremity muscle strength, postural balance and fall efficacy in elders. Therefore, this program is recommended for use in fall prevention programs for elders living in the community.

Designing and pilot-testing a church-based community program to reduce obesity among African Americans.

PubMed

Cowart, Luvenia W; Biro, Diana J; Wasserman, Timothy; Stein, Ruth Federman; Reider, Lindsey R; Brown, Betty

2010-01-01

Obesity raises the risk for many chronic diseases and poor health outcomes. African Americans have the highest rates of excess weight in the nation, and standard weight management programs have not worked well with this population. The Genesis Health Project, a community-designed, culturally competent intervention to reduce obesity and promote healthy lifestyles, represents a successful partnership among Syracuse University, local Black churches, and several sponsors to empower families of color to adopt and sustain positive health practices across the lifespan. This article describes the Phase I design and pilot-testing of this demonstration project, and reports the results of the first-year nutrition education/exercise-fitness program. Participant feedback indicates notable shifts toward healthier food choices, cooking methods, and exercise habits, as well as increased motivation, improved health indicators, and revamped church menus. Lessons learned from this project can be helpful in developing other community/faith-based health promotion programs for African Americans.

Quiet engine program flight engine design study

NASA Technical Reports Server (NTRS)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

Plant Operations for Wastewater Facilities, Vol. II, Part D. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

A Computer-Based Laboratory Project for the Study of Stimulus Generalization and Peak Shift

ERIC Educational Resources Information Center

Derenne, Adam; Loshek, Eevett

2009-01-01

This paper describes materials designed for classroom projects on stimulus generalization and peak shift. A computer program (originally written in QuickBASIC) is used for data collection and a Microsoft Excel file with macros organizes the raw data on a spreadsheet and creates generalization gradients. The program is designed for use with human…

The Design and Implementation of a Management Information System to Facilitate the Functioning of a CBTE Program.

ERIC Educational Resources Information Center

Neuhauser, Charlotte

The Vocational and Applied Arts (VAE) Management Information System (MIS) is designed to select, store, process, and transmit information needed in a competency-based teacher education (CBTE) program. The system is computerized and is composed of six subsystems which deal with admissions, class scheduling, faculty loads, instruction, field…

77 FR 65037 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Order Approving a Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

... Organizations; C2 Options Exchange, Incorporated; Order Approving a Proposed Rule Change To Adopt a Designated... thereunder,\\2\\ a proposed rule change to adopt a Designated Primary Market-Maker (``DPM'') program. The... the Notice, C2 has proposed to adopt a DPM program. The associated proposed rules are based on the...

Design of an Information Technology Undergraduate Program to Produce IT Versatilists

ERIC Educational Resources Information Center

Koohang, Alex; Riley, Liz; Smith, Terry; Floyd, Kevin

2010-01-01

This paper attempts to present a model for designing an IT undergraduate program that is based on the recommendations of the Association for Computer Machinery/Institute of Electrical and Electronics Engineers--Information Technology (ACM/IEEE--IT) Curriculum Model. The main intent is to use the ACM/IEEE--IT Curriculum Model's recommendations as a…

Plant Operations for Wastewater Facilities, Vol. II, Part E. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Meeting the Need to Belong: Predicting Effects of a Friendship Enrichment Program for Older Women

ERIC Educational Resources Information Center

Stevens, Nan L.; Martina, Camille M. S.; Westerhof, Gerben J.

2006-01-01

Purpose: This study explores the effects of participation in a program designed to enrich friendship and reduce loneliness among women in later life. Several hypotheses based on the need to belong, socioemotional selectivity theory, and the social compensation model were tested. Design and Methods: Study 1 involved two measurement points, one at…

Plant Operations for Wastewater Facilities, Vol. II, Part B. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part A. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part C. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Three Physical Education Programs' Adaptive Approaches to Change: "How Can I Spin that so It Works for Me?"

ERIC Educational Resources Information Center

Patton, Kevin; Griffin, Linda L.

2008-01-01

This study examined five of 12 physical education teachers participating in the Assessment Initiative for Middle School Physical Education (AIMS-PE), a reform-based teacher development project designed to help teachers examine and reframe their assessment practices and to design and implement curricular programs that encourage active teaching and…

Are We Ready for the Bachelor's Degree in Educational Technology? Perceptions from the Field and a Proposal

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.; Kang, YoungJu

2015-01-01

Some in the field of educational technology have called for offering bachelor's degrees. Unfortunately, the literature base only provides guidance on designing, developing, and delivering master's and doctoral degree programs. This article, in distinction, focuses on the design of a bachelor's degree program by focusing on the perceptions of…

Practitioner Toolkit: Working with Adult English Language Learners.

ERIC Educational Resources Information Center

Lieshoff, Sylvia Cobos; Aguilar, Noemi; McShane, Susan; Burt, Miriam; Peyton, Joy Kreeft; Terrill, Lynda; Van Duzer, Carol

2004-01-01

This document is designed to give support to adult education and family literacy instructors who are new to serving adult English language learners and their families in rural, urban, and faith- and community-based programs. The Toolkit is designed to have a positive impact on the teaching and learning in these programs. The results of two…

Discussion of the Design and Implementation of the Lauder Content-Based Curriculum: Practical and Theoretical Considerations.

ERIC Educational Resources Information Center

Cowles, Maria Antonia

The dual-degree MBA/MA program of the University of Pennsylvania is described. The program is designed to provide future business leaders with superior international management education and prepare them to operate effectively and comfortably in the global economy through social and professional language skills and knowledge of diverse cultural…

Mobile App Design for Teaching and Learning: Educators' Experiences in an Online Graduate Course

ERIC Educational Resources Information Center

Hsu, Yu-Chang; Ching, Yu-Hui

2013-01-01

This research explored how educators with limited programming experiences learned to design mobile apps through peer support and instructor guidance. Educators were positive about the sense of community in this online course. They also considered App Inventor a great web-based visual programming tool for developing useful and fully functioning…

Study of a Nongraded Supplementary Group Communication Skills Program: Rationale, Pupil Personal-Social Characteristics, and Program Effects.

ERIC Educational Resources Information Center

Stumpe, Doris M.

The purposes of this study were to design an experimental communications skills improvement program for low-achieving middle-grade pupils, to investigate certain assumed pupil personal-social characteristics on which the program was based, and to assess the effectiveness of the program. Two basic features incorporated into the new program were (1)…

Does Family Make a Difference? Mid-Term Effects of a School/Home-Based Intervention Program to Enhance Reading Motivation

ERIC Educational Resources Information Center

Villiger, Caroline; Niggli, Alois; Wandeler, Christian; Kutzelmann, Sabine

2012-01-01

This study examined the effects of a school/home-based intervention program designed to enhance the reading motivation and comprehension of Swiss fourth graders (N = 713). In order to identify the specific contribution of the home environment, the program was implemented in one group "without" (N = 244) and in one group "with"…

The Perceived Effectiveness of the School Based Support Program: A National Capacity Building Initiative by the National Center for Educational Development at Qatar University

ERIC Educational Resources Information Center

Abu-Tineh, Abdullah M.

2015-01-01

Purpose: This study aims to investigate the effectiveness of the school-based support program (SBSP) as perceived by teachers who participated in this program. SBSP was designed to collectively build the capacity and promote the overall quality of teaching and learning in identified independent schools in the State of Qatar.…

Science and the City: Community Cultural and Natural Resources at the Core of a Place-Based, Science Teacher Preparation Program

ERIC Educational Resources Information Center

Miele, Eleanor A.; Powell, Wayne G.

2010-01-01

The departments of Geology and Education at Brooklyn College collaborated with five informal educational institutions in the development of a place-based graduate program for Earth science teachers. The team used "backward design" to develop a program of courses that are thematically structured and use a city-as-lab approach that places…

Quality and Characteristics of the North Carolina Pre-Kindergarten Program: 2011-2012 Statewide Evaluation

ERIC Educational Resources Information Center

Peisner-Feinberg, Ellen; Schaaf, Jennifer; Hildebrandt, Lisa; LaForett, Dore

2013-01-01

The North Carolina Pre-Kindergarten Program (NC Pre-K) is a state-funded initiative for at-risk 4-year-olds, designed to provide a high quality, classroom-based educational program during the year prior to kindergarten entry. Children are eligible for NC Pre-K based on age, family income (at or below 75% of state median income), and other risk…

[A design of simple ventilator control system based on LabVIEW].

PubMed

Pei, Baoqing; Xu, Shengwei; Li, Hui; Li, Deyu; Pei, Yidong; He, Haixing

2011-01-01

This paper designed a ventilator control system to control proportional valves and motors. It used LabVIEW to control the object mentioned above and design ,validate, evaluate arithmetic, and establish hardware in loop platform. There are two system' s hierarchies. The high layer was used to run non-real time program and the low layer was used to run real time program. The two layers communicated through TCP/IP net. The program can be divided into several modules, which can be expanded and maintained easily. And the harvest in the prototype designing can be seamlessly used to embedded products. From all above, this system was useful in employing OEM products.

Translation of an Evidence-Based Tailored Childhood Injury Prevention Program

PubMed Central

Weaver, Nancy L.; Williams, Janice; Jacobsen, Heather A.; Botello-Harbaum, Maria; Glasheen, Cristie; Noelcke, Elizabeth; Nansel, Tonja R.

2008-01-01

This article describes the process of translating Safe n’ Sound, a computer-based program for parents of young children, for a general clinic environment. Safe n’ Sound is designed to reduce the risk of unintentional childhood injuries, the leading cause of death among children older than 1 year in the United States. The evidence-based program produces tailored information for parents and their healthcare provider about burns, falls, poisoning, drowning, suffocations, choking prevention, and car safety. To offer Safe n’ Sound to a broader audience, we translated the program from the form used for efficacy testing to a stand-alone application. Notable steps in this translation included (1) conducting an organizational assessment to determine the needs of the clinic staff and feasibility of implementation, (2) modifying the program to reduce length, prioritize risk areas, and update content, (3) repackaging the program to minimize cost and space requirements, and (4) developing promotional and instructional materials. Factors contributing to the success of this effort include strong collaborative partnerships, the relative advantage of Safe n’ Sound over traditional materials, the modifiable design of the program, and the support of the clinic staff and providers. Challenges and areas for future work are discussed. PMID:18287925

Propulsion/flight control integration technology (PROFIT) software system definition

NASA Technical Reports Server (NTRS)

Carlin, C. M.; Hastings, W. J.

1978-01-01

The Propulsion Flight Control Integration Technology (PROFIT) program is designed to develop a flying testbed dedicated to controls research. The control software for PROFIT is defined. Maximum flexibility, needed for long term use of the flight facility, is achieved through a modular design. The Host program, processes inputs from the telemetry uplink, aircraft central computer, cockpit computer control and plant sensors to form an input data base for use by the control algorithms. The control algorithms, programmed as application modules, process the input data to generate an output data base. The Host program formats the data for output to the telemetry downlink, the cockpit computer control, and the control effectors. Two applications modules are defined - the bill of materials F-100 engine control and the bill of materials F-15 inlet control.

EvoBuild: A Quickstart Toolkit for Programming Agent-Based Models of Evolutionary Processes

NASA Astrophysics Data System (ADS)

Wagh, Aditi; Wilensky, Uri

2018-04-01

Extensive research has shown that one of the benefits of programming to learn about scientific phenomena is that it facilitates learning about mechanisms underlying the phenomenon. However, using programming activities in classrooms is associated with costs such as requiring additional time to learn to program or students needing prior experience with programming. This paper presents a class of programming environments that we call quickstart: Environments with a negligible threshold for entry into programming and a modest ceiling. We posit that such environments can provide benefits of programming for learning without incurring associated costs for novice programmers. To make this claim, we present a design-based research study conducted to compare programming models of evolutionary processes with a quickstart toolkit with exploring pre-built models of the same processes. The study was conducted in six seventh grade science classes in two schools. Students in the programming condition used EvoBuild, a quickstart toolkit for programming agent-based models of evolutionary processes, to build their NetLogo models. Students in the exploration condition used pre-built NetLogo models. We demonstrate that although students came from a range of academic backgrounds without prior programming experience, and all students spent the same number of class periods on the activities including the time students took to learn programming in this environment, EvoBuild students showed greater learning about evolutionary mechanisms. We discuss the implications of this work for design research on programming environments in K-12 science education.

Paper and Process: How Youth Programs Manage Program Intake, Individual Service Strategy Development, and Case Files.

ERIC Educational Resources Information Center

Callahan, Jim; McLaughlin, Brenda

This guide presents information and materials to help youth programs manage program intake, design an individual service strategy (ISS) as mandated in the Workforce Investment Act, and manage case files. The materials are based on information obtained from staff working in seven successful youth workforce investment programs in Maryland,…

An Evaluative Overview of the Gloria Floyd Community School Academic Excellence Program.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL. Office of Educational Accountability.

The Gloria Floyd Academic Excellence Program (AEP) was designed as a school-based enrichment program for average and above-average students in grades one through six. The evaluation of this program involved discussions with the school administrator and program teacher, as well as a questionnaire-survey of AEP students, their parents, and regular…

Static characteristics design of hydrostatic guide-ways based on fluid-structure interactions

NASA Astrophysics Data System (ADS)

Lin, Shuo; Yin, YueHong

2016-10-01

With the raising requirements in micro optical systems, the available machines become hard to achieve the process dynamic and accuracy in all aspects. This makes compact design based on fluid/structure interactions (FSI) important. However, there is a difficulty in studying FSI with oil film as fluid domain. This paper aims at static characteristic design of a hydrostatic guide-way with capillary restrictors based on FSI. The pressure distribution of the oil film land is calculated by solving the Reynolds-equation with Galerkin technique. The deformation of structure is calculated by commercial FEM software, MSC. Nastran. A matlab program is designed to realize the coupling progress by modifying the load boundary in the submitting file and reading the deformation result. It's obvious that the stiffness of the hydrostatic bearing decreases with the weakening of the bearing structure. This program is proposed to make more precise prediction of bearing stiffness.

Human-simulation-based learning to prevent medication error: A systematic review.

PubMed

Sarfati, Laura; Ranchon, Florence; Vantard, Nicolas; Schwiertz, Vérane; Larbre, Virginie; Parat, Stéphanie; Faudel, Amélie; Rioufol, Catherine

2018-01-31

In the past 2 decades, there has been an increasing interest in simulation-based learning programs to prevent medication error (ME). To improve knowledge, skills, and attitudes in prescribers, nurses, and pharmaceutical staff, these methods enable training without directly involving patients. However, best practices for simulation for healthcare providers are as yet undefined. By analysing the current state of experience in the field, the present review aims to assess whether human simulation in healthcare helps to reduce ME. A systematic review was conducted on Medline from 2000 to June 2015, associating the terms "Patient Simulation," "Medication Errors," and "Simulation Healthcare." Reports of technology-based simulation were excluded, to focus exclusively on human simulation in nontechnical skills learning. Twenty-one studies assessing simulation-based learning programs were selected, focusing on pharmacy, medicine or nursing students, or concerning programs aimed at reducing administration or preparation errors, managing crises, or learning communication skills for healthcare professionals. The studies varied in design, methodology, and assessment criteria. Few demonstrated that simulation was more effective than didactic learning in reducing ME. This review highlights a lack of long-term assessment and real-life extrapolation, with limited scenarios and participant samples. These various experiences, however, help in identifying the key elements required for an effective human simulation-based learning program for ME prevention: ie, scenario design, debriefing, and perception assessment. The performance of these programs depends on their ability to reflect reality and on professional guidance. Properly regulated simulation is a good way to train staff in events that happen only exceptionally, as well as in standard daily activities. By integrating human factors, simulation seems to be effective in preventing iatrogenic risk related to ME, if the program is well designed. © 2018 John Wiley & Sons, Ltd.

One University's Approach to Student-Based Experiential Training With Spaceflight Hardware

NASA Astrophysics Data System (ADS)

Klumpar, D. M.

2005-12-01

Montana State University's interdisciplinary Space Science and Engineering Laboratory (SSEL) is in the fifth year of a program that is providing trained space experimentalists and space-savvy engineers for the nation's workforce. Through this program students learn, through first hand experience, the need for rigorous trade studies, documentation, design reviews, and procedures by which interdisciplinary teams conduct successful scientific satellite missions. The program differs from more traditional university student involvements in satellite instrumentation in that, rather than somewhat compartmentalized participation in a formal NASA space mission (or sounding rocket investigation) these students conceive, design, build, test, and fly their own missions. As a result of these projects being entirely student managed and student executed, the students experience all aspects of the complete mission development cycle, including full responsibility for project management. Contributing to the success of the MSU program has been the fact that the projects are ongoing and are carried on outside of the academic course based curriculum structure. Rather than merely taking a course of two and then moving on, individual students spend much of their university tenure associated with the laboratory as an extracurricular activity. The program is based on continuing professional development of the individual student by providing increasingly challenging tasks through increasingly sophisticated projects. The tiered program offers ground-based instruments, balloon-borne systems and payloads, rockets and rocket-based instruments, and earth orbiting satellites and their subsystems. Frequent opportunities to develop and test hardware throughout the long process of satellite design and development are provided by low-cost and frequent high-altitude balloon flights. Strategies that have been developed for dealing with student turnover, and the multitude of priorities that distract the students will be discussed.

The information architecture of behavior change websites.

PubMed

Danaher, Brian G; McKay, H Garth; Seeley, John R

2005-05-18

The extraordinary growth in Internet use offers researchers important new opportunities to identify and test new ways to deliver effective behavior change programs. The information architecture (IA)-the structure of website information--is an important but often overlooked factor to consider when adapting behavioral strategies developed in office-based settings for Web delivery. Using examples and relevant perspectives from multiple disciplines, we describe a continuum of website IA designs ranging from a matrix design to the tunnel design. The free-form matrix IA design allows users free rein to use multiple hyperlinks to explore available content according to their idiosyncratic interests. The more directive tunnel IA design (commonly used in e-learning courses) guides users step-by-step through a series of Web pages that are arranged in a particular order to improve the chances of achieving a goal that is measurable and consistent. Other IA designs are also discussed, including hierarchical IA and hybrid IA designs. In the hierarchical IA design, program content is arranged in a top-down manner, which helps the user find content of interest. The more complex hybrid IA design incorporates some combination of components that use matrix, tunnel, and/or hierarchical IA designs. Each of these IA designs is discussed in terms of usability, participant engagement, and program tailoring, as well as how they might best be matched with different behavior change goals (using Web-based smoking cessation interventions as examples). Our presentation underscores the role of considering and clearly reporting the use of IA designs when creating effective Web-based interventions. We also encourage the adoption of a multidisciplinary perspective as we move towards a more mature view of Internet intervention research.

Task Listing for Introduction to Health Occupations. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task listing is designed to be used in combination with the "Health Occupations Education Service Area Resource" in order to implement competency-based education in health occupations programs in Virginia. The task listing contains four major sections: (1) content/concept areas; (2) program and course description; (3) content…

Competency-Based Education Programs: A Library Perspective

ERIC Educational Resources Information Center

Sanders, Colleen

2015-01-01

Competency-based education (CBE) is an emerging model for higher education designed to reduce certain barriers to educational attainment. This essay describes CBE and the challenges and opportunities for academic librarians desiring to serve students and faculty in Library and Information Management Master of Library Science (MLS) programs. Every…

Screen Miniatures as Icons for Backward Navigation in Content-Based Software.

ERIC Educational Resources Information Center

Boling, Elizabeth; Ma, Guoping; Tao, Chia-Wen; Askun, Cengiz; Green, Tim; Frick, Theodore; Schaumburg, Heike

Users of content-based software programs, including hypertexts and instructional multimedia, rely on the navigation functions provided by the designers of those program. Typical navigation schemes use abstract symbols (arrows) to label basic navigational functions like moving forward or backward through screen displays. In a previous study, the…

Acid-Base Disorders--A Computer Simulation.

ERIC Educational Resources Information Center

Maude, David L.

1985-01-01

Describes and lists a program for Apple Pascal Version 1.1 which investigates the behavior of the bicarbonate-carbon dioxide buffer system in acid-base disorders. Designed specifically for the preclinical medical student, the program has proven easy to use and enables students to use blood gas parameters to arrive at diagnoses. (DH)

The Maine Sealant Manual for School-Based and School-Linked Dental Sealant Programs.

ERIC Educational Resources Information Center

Hayward, Kneka, Ed.

This manual is designed for use by school personnel and dental personnel to aid in the development and maintenance of school-based or school-linked dental sealant programs. The sections include (1) "Introduction"; (2) "Guidelines" (school selection, school contacts, dental providers, target grades, and tooth selection…

Training Injury Control Practitioners: The Indian Health Service Model.

ERIC Educational Resources Information Center

Smith, Richard J., III; Dellapenna, Alan J., Jr.; Berger, Lawrence R.

2000-01-01

Describes an innovative training program for injury prevention specialists developed by the Indian Health Service (IHS), noting its applicability to other community-based settings. Examines injuries and American Indians; designing the IHS program; IHS training courses; examples of community-based interventions organized by people who had completed…

Indiana Distributive Education Competency Based Model.

ERIC Educational Resources Information Center

Davis, Rod; And Others

This Indiana distributive education competency-based curriculum model is designed to help teachers and local administrators plan and conduct a comprehensive marketing and distributive education program. It is divided into three levels--one level for each year of a three-year program. The competencies common to a variety of marketing and…

School-Based Health Clinics: An Analysis of the Johns Hopkins Study. Research Developments.

ERIC Educational Resources Information Center

Demsko, Tobin W.

School-based health clinics, adolescent pregnancy prevention programs offering comprehensive health services, represent the latest initiative to reduce the incidence of teenage pregnancy. Researchers at Johns Hopkins University designed and administered a pregnancy prevention program which offered sexuality education and family planning services…

The Adolescent Smoking and Health Project.

ERIC Educational Resources Information Center

Sutherland, Mary; And Others

This project was designed to specifically apply a health planning management system to a school based health education risk reduction program. Additionally, the Adolescent Smoking and Alcohol Project assisted youth in making informed decisions about the use/abuse of alcohol and cigarettes. Program components included a related knowledge base;…

AUTOCASK (AUTOmatic Generation of 3-D CASK models). A microcomputer based system for shipping cask design review analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerhard, M.A.; Sommer, S.C.

1995-04-01

AUTOCASK (AUTOmatic Generation of 3-D CASK models) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for the structural analysis of shipping casks for radioactive material. Model specification is performed on the microcomputer, and the analyses are performed on an engineering workstation or mainframe computer. AUTOCASK is based on 80386/80486 compatible microcomputers. The system is composed of a series of menus, input programs, display programs, a mesh generation program, and archive programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests.

Traditional versus rule-based programming techniques: Application to the control of optional flight information

NASA Technical Reports Server (NTRS)

Ricks, Wendell R.; Abbott, Kathy H.

1987-01-01

To the software design community, the concern over the costs associated with a program's execution time and implementation is great. It is always desirable, and sometimes imperative, that the proper programming technique is chosen which minimizes all costs for a given application or type of application. A study is described that compared cost-related factors associated with traditional programming techniques to rule-based programming techniques for a specific application. The results of this study favored the traditional approach regarding execution efficiency, but favored the rule-based approach regarding programmer productivity (implementation ease). Although this study examined a specific application, the results should be widely applicable.

American Recovery and Reinvestment Act of 2009: Final Report on Customer Acceptance, Retention, and Response to Time-Based Rates from Consumer Behavior Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; Scheer, Rich

Time-based rate programs, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. Under the Smart Grid Investment Grant Program (SGIG), the U.S. Department of Energy (DOE) partnered with several electric utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was tomore » produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates.« less

Italy-Japan international project-based learning for developing human resources using design of welfare equipment as a subject.

PubMed

Hanafusa, A; Komeda, T; Ito, K; Zobel, P Beomonte

2015-08-01

Project-based learning (PBL) is effective for developing human resources of young students. The design of welfare equipment, such as wheelchairs and gait assistive devices, is taken as the subject in this study because these devices must be fit to their environment, users, and method of use; students must consider the circumstances of each country concerned. The program commenced in 2012 at L'Aquila, Italy, and the Shibaura Institute of Technology, Japan and has been continuing for three years. Students were divided into four groups and discussions were held on how to adapt the equipment to the user and environment. After discussion, they designed and simulated a model of the equipment using CAD. Finally, they presented their designs to each other. Through the program, students had fruitful discussions, exchanged ideas from different cultures, and learned from each other. Furthermore, friendships among the students were nurtured. It is believed that the objective of the program was satisfactorily accomplished.

Design of a Cluster-Randomized Controlled Trial of a Diabetes Prevention Program within African-American Churches: The Fit Body and Soul Study

PubMed Central

Williams, Lovoria B.; Sattin, Richard W.; Dias, James; Garvin, Jane T.; Marion, Lucy; Joshua, Thomas; Kriska, Andrea; Kramer, M. Kaye; Echouffo-Tcheugui, Justin B.; Freeman, Arin; Narayan, K.M. Venkat

2013-01-01

Evidence from varied community settings has shown that the Group Lifestyle Balance (GLB) Program and other adaptations of the Diabetes Prevention Program (DPP) intervention are effective in lowering diabetes risk. Most DPP data originated from studies of pre-diabetic whites, with only sparse evidence of the effect of DPP in African Americans (AAs) in community settings. This paper describes the design, methods, baseline characteristics and cost effective measures, of a single-blinded, cluster- randomized trial of a faith-based adaptation of the GLB program, Fit Body and Soul (FBAS). The major aims are to test efficacy and cost utility of FBAS in twenty AA churches. Randomization occurred at the church level and 604 AA overweight/obese (BMI≥25 kg/m2) adults with fasting plasma glucose range from normal to pre-diabetic received either FBAS or a health-education comparison program. FBAS is a group-based, multi-level intervention delivered by trained church health advisors (health professionals from within the church), with the goal of ≥7% weight loss, achieved through increasing physical activity, healthy eating and behavior modification. The primary outcome is weight change at 12-weeks post intervention. Secondary outcomes include hemoglobin A1C, fasting plasma glucose, waist circumference, blood pressure, physical activity level, quality of life measures, and cost-effectiveness. FBAS is the largest known cohort of AAs enrolled in a faith-based DPP translation. Reliance on health professionals from within the church for program implementation and the cost analysis are unique aspects of this trial. The design provides a model for faith-based DPPs and holds promise for program sustainability and widespread dissemination. PMID:23354313

Start, Stop, Restart: The Recent History of Federal Funding for Radiochemistry Education

NASA Astrophysics Data System (ADS)

Williamson, R. Craig

2009-08-01

Over the course of the 2009, Federal Fiscal Year the U.S. Departments of Homeland Security and Defense will introduce university programs designed to provide the U.S. national laboratories with a highly qualified workforce in nuclear forensics. These programs are designed to recruit the best and brightest students, develop universities research and education activities, and to enhance university/laboratory(s) interactions nuclear forensics. The approach will be comprehensive in that it will target undergraduate and graduate students, faculty members and institutions. This will include an undergraduate research program designed to encourage emerging seniors to perform research at designated national laboratories throughout the United States. In addition to the undergraduate program, a nationally competitive graduate fellowship program in nuclear forensics was established in 2008. This program provides a four-year appointment with a monthly stipend, full payment of tuition and fees, the establishment of participating universities, and required post-graduate positions in nuclear forensics. A Nuclear Forensics Education Award program will also be introduced. This broad-based program will have an impact on university programs interested in developing nuclear forensics capabilities. This will include funds for instrumentation and equipment, faculty members, students, and curriculum.

Hidden Realities inside PBL Design Processes: Is Consensus Design an Impossible Clash of Interest between the Individual and the Collective, and Is Architecture Its First Victim?

ERIC Educational Resources Information Center

Pihl, Ole

2015-01-01

How do architecture students experience the contradictions between the individual and the group at the Department of Architecture and Design of Aalborg University? The Problem-Based Learning model has been extensively applied to the department's degree programs in coherence with the Integrated Design Process, but is a group-based architecture and…

Bioterror Preparedness-Educational Programming for Military, Public Health and Civilian Medical Personnel

DTIC Science & Technology

2006-10-01

agents. Page 5 of 42 BODY Research Study Design & Survey Development: Study Design We designed a prospective quantitative study looking at the...to bioterrorism to different groups of healthcare learners as follows: This research study design was developed in collaboration with the...PDA based format, and printed monograph based format. The research will focus on the effectiveness of distance learning and self-study methodologies

Factors contributing to intervention fidelity in a multi-site chronic disease self-management program.

PubMed

Perrin, Karen M; Burke, Somer Goad; O'Connor, Danielle; Walby, Gary; Shippey, Claire; Pitt, Seraphine; McDermott, Robert J; Forthofer, Melinda S

2006-10-26

Disease self-management programs have been a popular approach to reducing morbidity and mortality from chronic disease. Replicating an evidence-based disease management program successfully requires practitioners to ensure fidelity to the original program design. The Florida Health Literacy Study (FHLS) was conducted to investigate the implementation impact of the Pfizer, Inc. Diabetes Mellitus and Hypertension Disease Self-Management Program based on health literacy principles in 14 community health centers in Florida. The intervention components discussed include health educator recruitment and training, patient recruitment, class sessions, utilization of program materials, translation of program manuals, patient retention and follow-up, and technical assistance. This report describes challenges associated with achieving a balance between adaptation for cultural relevance and fidelity when implementing the health education program across clinic sites. This balance was necessary to achieve effectiveness of the disease self-management program. The FHLS program was implemented with a high degree of fidelity to the original design and used original program materials. Adaptations identified as advantageous to program participation are discussed, such as implementing alternate methods for recruiting patients and developing staff incentives for participation. Effective program implementation depends on the talent, skill and willing participation of clinic staff. Program adaptations that conserve staff time and resources and recognize their contribution can increase program effectiveness without jeopardizing its fidelity.

Value-based insurance plus disease management increased medication use and produced savings.

PubMed

Gibson, Teresa B; Mahoney, John; Ranghell, Karlene; Cherney, Becky J; McElwee, Newell

2011-01-01

We evaluated the effects of implementing a value-based insurance design program for patients with diabetes in two groups within a single firm. One group participated in disease management; the other did not. We matched members of the two groups to similar enrollees within the company that did not offer the value-based program. We found that participation in both value-based insurance design and disease management resulted in sustained improvement over time. Use of diabetes medications increased 6.5 percent over three years. Adherence to diabetes medical guidelines also increased, producing a return on investment of $1.33 saved for every dollar spent during a three-year follow-up period.

Model for the design of distributed data bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ram, S.

This research focuses on developing a model to solve the File Allocation Problem (FAP). The model integrates two major design issues, namely Concurrently Control and Data Distribution. The central node locking mechanism is incorporated in developing a nonlinear integer programming model. Two solution algorithms are proposed, one of which was implemented in FORTRAN.V. The allocation of data bases and programs are examined using this heuristic. Several decision rules were also formulated based on the results of the heuristic. A second more comprehensive heuristic was proposed, based on the knapsack problem. The development and implementation of this algorithm has been leftmore » as a topic for future research.« less

An Educational Technology Curriculum for Converging Technologies.

ERIC Educational Resources Information Center

Allen, Brockenbrough S.; And Others

1989-01-01

Outlines curriculum reforms being made in the master's level educational technology program at San Diego State University. Topics discussed include technological changes and the roles of educational product designers; human information processing; knowledge base design; student design of educational adventure games; interactive video design; and…

A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine.

PubMed

Lee, Haerin; Jung, Moonki; Lee, Ki-Kwang; Lee, Sang Hun

2017-02-06

In this paper, we propose a three-dimensional design and evaluation framework and process based on a probabilistic-based motion synthesis algorithm and biomechanical analysis system for the design of the Smith machine and squat training programs. Moreover, we implemented a prototype system to validate the proposed framework. The framework consists of an integrated human-machine-environment model as well as a squat motion synthesis system and biomechanical analysis system. In the design and evaluation process, we created an integrated model in which interactions between a human body and machine or the ground are modeled as joints with constraints at contact points. Next, we generated Smith squat motion using the motion synthesis program based on a Gaussian process regression algorithm with a set of given values for independent variables. Then, using the biomechanical analysis system, we simulated joint moments and muscle activities from the input of the integrated model and squat motion. We validated the model and algorithm through physical experiments measuring the electromyography (EMG) signals, ground forces, and squat motions as well as through a biomechanical simulation of muscle forces. The proposed approach enables the incorporation of biomechanics in the design process and reduces the need for physical experiments and prototypes in the development of training programs and new Smith machines.

A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine

PubMed Central

Lee, Haerin; Jung, Moonki; Lee, Ki-Kwang; Lee, Sang Hun

2017-01-01

In this paper, we propose a three-dimensional design and evaluation framework and process based on a probabilistic-based motion synthesis algorithm and biomechanical analysis system for the design of the Smith machine and squat training programs. Moreover, we implemented a prototype system to validate the proposed framework. The framework consists of an integrated human–machine–environment model as well as a squat motion synthesis system and biomechanical analysis system. In the design and evaluation process, we created an integrated model in which interactions between a human body and machine or the ground are modeled as joints with constraints at contact points. Next, we generated Smith squat motion using the motion synthesis program based on a Gaussian process regression algorithm with a set of given values for independent variables. Then, using the biomechanical analysis system, we simulated joint moments and muscle activities from the input of the integrated model and squat motion. We validated the model and algorithm through physical experiments measuring the electromyography (EMG) signals, ground forces, and squat motions as well as through a biomechanical simulation of muscle forces. The proposed approach enables the incorporation of biomechanics in the design process and reduces the need for physical experiments and prototypes in the development of training programs and new Smith machines. PMID:28178184

A Component-based Programming Model for Composite, Distributed Applications

NASA Technical Reports Server (NTRS)

Eidson, Thomas M.; Bushnell, Dennis M. (Technical Monitor)

2001-01-01

The nature of scientific programming is evolving to larger, composite applications that are composed of smaller element applications. These composite applications are more frequently being targeted for distributed, heterogeneous networks of computers. They are most likely programmed by a group of developers. Software component technology and computational frameworks are being proposed and developed to meet the programming requirements of these new applications. Historically, programming systems have had a hard time being accepted by the scientific programming community. In this paper, a programming model is outlined that attempts to organize the software component concepts and fundamental programming entities into programming abstractions that will be better understood by the application developers. The programming model is designed to support computational frameworks that manage many of the tedious programming details, but also that allow sufficient programmer control to design an accurate, high-performance application.

Project based, Collaborative, Algorithmic Robotics for High School Students: Programming Self Driving Race Cars at MIT

DTIC Science & Technology

2017-02-19

software systems: the students design and build robotics software towards real-world applications, without being distracted by hardware issues; (ii) it...high school students require the students to focus on building and integrating the hardware that make up the robot, at the expense of designing and...robotics programs focus on the mechanics; as a result, they do not have room for students to design and implement relatively complex software systems, as

Reaching out to high school youth: the effectiveness of a video-based antistigma program.

PubMed

Stuart, Heather

2006-09-01

To evaluate the impact on high school students of a video-based antistigma program portraying real life experiences of individuals with schizophrenia and lesson plans to guide classroom discussions and active learning. We used a pre- and posttest design to measure the short-term impact of the program on student's knowledge of schizophrenia and its treatment as well as students' self-reported socially distancing behaviours. Participants (571 students) were from 8 high schools across Canada. Following the Reaching Out antistigma program, high school students were significantly more knowledgeable and less socially distancing. Impact also varied by age group and sex. Video-based antistigma programs are comparable to programs that deliver educational messages through direct contact with individuals with mental illnesses. Video-based programs are more easily disseminated on a broad scale.

Evaluation of the Professional Development Program on Web Based Content Development

ERIC Educational Resources Information Center

Yurdakul, Bünyamin; Uslu, Öner; Çakar, Esra; Yildiz, Derya G.

2014-01-01

The aim of this study is to evaluate the professional development program on web based content development (WBCD) designed by the Ministry of National Education (MoNE). Based on the theoretical CIPP model by Stufflebeam and Guskey's levels of evaluation, the study was carried out as a case study. The study group consisted of the courses that…

Evaluating sampling designs by computer simulation: A case study with the Missouri bladderpod

USGS Publications Warehouse

Morrison, L.W.; Smith, D.R.; Young, C.; Nichols, D.W.

2008-01-01

To effectively manage rare populations, accurate monitoring data are critical. Yet many monitoring programs are initiated without careful consideration of whether chosen sampling designs will provide accurate estimates of population parameters. Obtaining accurate estimates is especially difficult when natural variability is high, or limited budgets determine that only a small fraction of the population can be sampled. The Missouri bladderpod, Lesquerella filiformis Rollins, is a federally threatened winter annual that has an aggregated distribution pattern and exhibits dramatic interannual population fluctuations. Using the simulation program SAMPLE, we evaluated five candidate sampling designs appropriate for rare populations, based on 4 years of field data: (1) simple random sampling, (2) adaptive simple random sampling, (3) grid-based systematic sampling, (4) adaptive grid-based systematic sampling, and (5) GIS-based adaptive sampling. We compared the designs based on the precision of density estimates for fixed sample size, cost, and distance traveled. Sampling fraction and cost were the most important factors determining precision of density estimates, and relative design performance changed across the range of sampling fractions. Adaptive designs did not provide uniformly more precise estimates than conventional designs, in part because the spatial distribution of L. filiformis was relatively widespread within the study site. Adaptive designs tended to perform better as sampling fraction increased and when sampling costs, particularly distance traveled, were taken into account. The rate that units occupied by L. filiformis were encountered was higher for adaptive than for conventional designs. Overall, grid-based systematic designs were more efficient and practically implemented than the others. ?? 2008 The Society of Population Ecology and Springer.

Energy Efficient Engine (E3) controls and accessories detail design report

NASA Technical Reports Server (NTRS)

Beitler, R. S.; Lavash, J. P.

1982-01-01

An Energy Efficient Engine program has been established by NASA to develop technology for improving the energy efficiency of future commercial transport aircraft engines. As part of this program, a new turbofan engine was designed. This report describes the fuel and control system for this engine. The system design is based on many of the proven concepts and component designs used on the General Electric CF6 family of engines. One significant difference is the incorporation of digital electronic computation in place of the hydromechanical computation currently used.

A Program Evaluation Tool for Dual Enrollment Transition Programs

ERIC Educational Resources Information Center

Grigal, Meg; Dwyre, Amy; Emmett, Joyce; Emmett, Richard

2012-01-01

This article describes the development and use of a program evaluation tool designed to support self-assessment of college-based dual enrollment transition programs serving students with intellectual disabilities between the ages of 18-21 in college settings. The authors describe the need for such an evaluation tool, outline the areas addressed by…

Applying the Concept of Trustworthiness to the Evaluation of a Clinical Program.

ERIC Educational Resources Information Center

Barzansky, Barbara; And Others

An attending tutor program designed to increase faculty-student contact within an Obstetrics and Gynecology clerkship was evaluated. Sessions were observed, written documents were reviewed, and faculty and students were interviewed in order to determine if the program was meeting its goals. Based on the evaluation data, the program was…

Using Pair Programming to Teach CAD Based Engineering Graphics

ERIC Educational Resources Information Center

Leland, Robert P.

2010-01-01

Pair programming was introduced into a course in engineering graphics that emphasizes solid modeling using SolidWorks. In pair programming, two students work at a single computer, and periodically trade off roles as driver (hands on the keyboard and mouse) and navigator (discuss strategy and design issues). Pair programming was used in a design…

77 FR 75441 - Healthy Home and Lead Hazard Control Grant Programs Data Collection; Progress Reporting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5603-N-93] Healthy Home and Lead Hazard... collection is designed to provide HUD timely information on progress of Healthy Homes Demonstration Program, Healthy Homes Technical Studies Program, Lead Base paint Hazard Control program, Lead Hazard Reduction...

The Hemingway Project: A Collaborative School-based Program for Teacher Certification.

ERIC Educational Resources Information Center

Butler, Shannon K.; And Others

At Weber State University (Utah), teacher educators have collaborated with English faculty to design a pilot program (Hemingway Project) which serves as an initial effort to restructure the teacher education program. The program, funded by the Hemingway Foundation, is intended to provide greater integration of the university experience with actual…

75 FR 47573 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... program is to use 10 key components based on the ``Program of Study Design Framework'' [[Page 47574...., the States' Career Clusters \\2\\), and offer students the opportunities to earn postsecondary credits... extent to which students are attaining necessary knowledge and skills, we agree that administrators...

A Healthy Lifestyle Program for Latino Daughters and Mothers: The BOUNCE Overview and Process Evaluation

ERIC Educational Resources Information Center

Olvera, Norma N.; Knox, Brook; Scherer, Rhonda; Maldonado, Gabriela; Sharma, Shreela V.; Alastuey, Lisa; Bush, Jill A.

2008-01-01

Background: Few family-based healthy lifestyle programs for Latinos have been conducted, especially family programs targeting mother-daughter dyads. Purpose: To assess the acceptability and feasibility of the Behavior Opportunities Uniting Nutrition Counseling and Exercise (BOUNCE) program designed for Latino mother-daughter pairs. Methods: 92…

The Experiences and Effect of Two Post-Secondary Mathematics Remediation Programs

ERIC Educational Resources Information Center

Izard, Angie D.

2010-01-01

The purpose of this study was to describe the experience and effect of two post-secondary mathematics remediation programs at a Midwest university. The two mathematics remediation programs were provided as part of a summer bridge program designed to assist entering freshmen students who demonstrated low mathematics proficiency levels based on…

Programming by Choice: Urban Youth Learning Programming with Scratch

ERIC Educational Resources Information Center

Maloney, John; Peppler, Kylie; Kafai, Yasmin B.; Resnick, Mitchel; Rusk, Natalie

2008-01-01

This paper describes Scratch, a visual, block-based programming language designed to facilitate media manipulation for novice programmers. We report on the Scratch programming experiences of urban youth ages 8-18 at a Computer Clubhouse--an after school center--over an 18-month period. Our analyses of 536 Scratch projects collected during this…

The evaluation of a culturally appropriate, community-based lifestyle intervention program for elderly Chinese immigrants with chronic diseases: a pilot study.

PubMed

Lu, Yifan; Dipierro, Moneika; Chen, Lingjun; Chin, Richard; Fava, Maurizio; Yeung, Albert

2014-03-01

The 'Healthy Habits Program' is a 6-month community-based program, which offers exercise facilities, training and weekly health education group to underserved elderly Chinese Americans with chronic medical diseases in their native languages. This pilot study evaluates the acceptability and the health effects of the 'Healthy Habits Program'. Ninety-nine subjects participated in the 'Healthy Habits Program' in 2011. Before and after the program, the participants were assessed in their physical and mental health using various fitness tests as well as measures of disability and psychological functioning. Participants provided overwhelmingly positive feedback on the program, which was associated with significant improvements in physical and mental health including a significant decrease in body mass index (BMI), blood pressure and increase in stamina. The participants reported lower mean scores on the Patient Health Questionnaire-9 item Scale (PHQ-9), indicating improved psychological well-being. These promising pilot study results from this lifestyle intervention program for elderly Chinese American immigrants with chronic diseases inform the design of a more definitive trial using a randomized design and larger sample size.

Bellman's GAP--a language and compiler for dynamic programming in sequence analysis.

PubMed

Sauthoff, Georg; Möhl, Mathias; Janssen, Stefan; Giegerich, Robert

2013-03-01

Dynamic programming is ubiquitous in bioinformatics. Developing and implementing non-trivial dynamic programming algorithms is often error prone and tedious. Bellman's GAP is a new programming system, designed to ease the development of bioinformatics tools based on the dynamic programming technique. In Bellman's GAP, dynamic programming algorithms are described in a declarative style by tree grammars, evaluation algebras and products formed thereof. This bypasses the design of explicit dynamic programming recurrences and yields programs that are free of subscript errors, modular and easy to modify. The declarative modules are compiled into C++ code that is competitive to carefully hand-crafted implementations. This article introduces the Bellman's GAP system and its language, GAP-L. It then demonstrates the ease of development and the degree of re-use by creating variants of two common bioinformatics algorithms. Finally, it evaluates Bellman's GAP as an implementation platform of 'real-world' bioinformatics tools. Bellman's GAP is available under GPL license from http://bibiserv.cebitec.uni-bielefeld.de/bellmansgap. This Web site includes a repository of re-usable modules for RNA folding based on thermodynamics.

PrimeSupplier Cross-Program Impact Analysis and Supplier Stability Indicator Simulation Model

NASA Technical Reports Server (NTRS)

Calluzzi, Michael

2009-01-01

PrimeSupplier, a supplier cross-program and element-impact simulation model, with supplier solvency indicator (SSI), has been developed so that the shuttle program can see early indicators of supplier and product line stability, while identifying the various elements and/or programs that have a particular supplier or product designed into the system. The model calculates two categories of benchmarks to determine the SSI, with one category focusing on agency programmatic data and the other focusing on a supplier's financial liquidity. PrimeSupplier was developed to help NASA smoothly transition design, manufacturing, and repair operations from the Shuttle program to the Constellation program, without disruption in the industrial supply base.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1995-01-01

DeMAID (Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problems such as large platforms in outer space. Groups modular subsystems on basis of interactions among them. Saves considerable amount of money and time in total design process, particularly in new design problem in which order of modules has not been defined. Originally written for design problems, also applicable to problems containing modules (processes) that take inputs and generate outputs. Available in three machine versions: Macintosh written in Symantec's Think C 3.01, Sun, and SGI IRIS in C language.

Design and fabrication of solar cell modules

NASA Technical Reports Server (NTRS)

Shaughnessy, T. P.

1978-01-01

A program conducted for design, fabrication and evaluation of twelve silicon solar cell modules is described. The purpose of the program was to develop a module design consistent with the requirements and objectives of JPL specification and to also incorporate elements of new technologies under development to meet LSSA Project goals. Module development emphasized preparation of a technically and economically competitive design based upon utilization of ion implanted solar cells and a glass encapsulation system. The modules fabricated, tested and delivered were of nominal 2 X 2 foot dimensions and 20 watt minimum rating. Basic design, design rationale, performance and results of environmental testing are described.

Status of the NASA YF-12 Propulsion Research Program

NASA Technical Reports Server (NTRS)

Albers, J. A.

1976-01-01

The YF-12 research program was initiated to establish a technology base for the design of an efficient propulsion system for supersonic cruise aircraft. The major technology areas under investigation in this program are inlet design analysis, propulsion system steady-state performance, propulsion system dynamic performance, inlet and engine control systems, and airframe/propulsion system interactions. The objectives, technical approach, and status of the YF-12 propulsion program are discussed. Also discussed are the results obtained to date by the NASA Ames, Lewis, and Dryden research centers. The expected technical results and proposed future programs are also given. Propulsion system configurations are shown.

MotivATE: A Pretreatment Web-Based Program to Improve Attendance at UK Outpatient Services Among Adults With Eating Disorders

PubMed Central

Newell, Ciarán; Griffiths, Jess; Walker, Kathy; Hooper, Holly; Thomas, Sarah; Thomas, Peter W; Arcelus, Jon; Day, James; Appleton, Katherine M

2017-01-01

Background In the UK, eating disorders affect upward of 725,000 people per year, and early assessment and treatment are important for patient outcomes. Around a third of adult outpatients in the UK who are referred to specialist eating disorder services do not attend, which could be related to patient factors related to ambivalence, fear, and a lack of confidence about change. This lack of engagement has a negative impact on the quality of life of patients and has implications for service costs. Objective To describe the development of a Web-based program (“MotivATE”) designed for delivery at the point of referral to an eating disorder service, with the aim of increasing service attendance. Methods We used intervention mapping and a person-based approach to design the MotivATE program and conducted a needs assessment to determine the current impact of service nonattendance on patients (via a review of the qualitative evidence) and services (through a service provision survey to understand current issues in UK services). Following the needs assessment, we followed the five steps of program development outlined by Bartholomew et al (1998): (1) creating a matrix of proximal program objectives; (2) selecting theory-based intervention methods and strategies; (3) designing and organizing the program; (4) specifying adoption and implementation plans; and (5) generating program evaluation plans. Results The needs assessment identified current nonattendance rates of 10%-32%. We defined the objective of MotivATE as increasing attendance rates at an eating disorder service and considered four key determinants of poor attendance: patient ambivalence about change, low patient self-efficacy, recognition of the need to change, and expectations about assessment. We chose aspects of motivational interviewing, self-determination theory, and the use of patient stories as the most appropriate ways to enable change. Think-aloud piloting with people with lived experience of an eating disorder resulted in positive feedback on the MotivATE program. Participants related well to the stories used. Nonetheless, because of feedback, we further modified the program in line with patients’ stage of change and addressed issues with the language used. A consultation with service staff meant that we could make clear implementation plans. Finally, a randomized controlled trial is currently underway to evaluate the MotivATE program. Conclusions Using intervention mapping, we have developed a novel pretreatment Web-based program that is acceptable to people with eating disorders. To our knowledge, this is the first such program. The model of development described here could be a useful template for designing further programs for other difficult-to-engage populations. PMID:28747295

Transformational derivation of programs using the Focus system

NASA Technical Reports Server (NTRS)

Reddy, Uday S.

1988-01-01

A program derivation support system called Focus is being constructed. It will formally derive programs using the paradigm of program transformation. The following issues are discussed: (1) the integration of validation and program derivation activities in the Focus system; (2) its tree-based user interface; (3) the control of search spaces in program derivation; and (4) the structure and organization of program derivation records. The inference procedures of the system are based on the integration of functional and logic programming principles. This brings about a synthesis of paradigms that were heretofore considered far apart, such as logical and executable specifications and constructive and transformational approaches to program derivation. A great emphasis has been placed, in the design of Focus, on achieving small search spaces during program derivation. The program manipulation operations such as expansion, simplification and rewriting were designed with this objective. The role of operations that are expensive in search spaces, such as folding, has been reduced. Program derivations are documented in Focus in a way that the high level descriptions of derivations are expressed only using program level information. All the meta-level information, together with dependencies between derivations of program components, is automatically recorded by the system at a lower level of description for its own use in replay.

Designing Computer-Based Assessments: Multidisciplinary Findings and Student Perspectives

ERIC Educational Resources Information Center

Dembitzer, Leah; Zelikovitz, Sarah; Kettler, Ryan J.

2017-01-01

A partnership was created between psychologists and computer programmers to develop a computer-based assessment program. Psychometric concerns of accessibility, reliability, and validity were juxtaposed with core development concepts of usability and user-centric design. Phases of development were iterative, with evaluation phases alternating with…

Work-Based Learning: Learning To Work; Working To Learn; Learning To Learn.

ERIC Educational Resources Information Center

Strumpf, Lori; Mains, Kristine

This document describes a work-based learning approach designed to integrate work and learning at the workplace and thereby help young people develop the skills required for changing workplaces. The following considerations in designing work-based programs are discussed: the trend toward high performance workplaces and changes in the way work is…

The Design and Development of a Multimedia Case-Based Environment on Parental Engagement

ERIC Educational Resources Information Center

Roushias, Christos; Barton, Angela Calabrese; Drake, Corey

2009-01-01

The purpose of this paper is to present the rationale and principles that guided the design and development of PARENTS, a multimedia case-based environment. Following a development research approach, the tenets of constructivist learning, and the advantages of case-based instruction, we developed a multimedia program in which we utilized and…

Virtual Reality Based Support System for Layout Planning and Programming of an Industrial Robotic Work Cell

PubMed Central

Yap, Hwa Jen; Taha, Zahari; Md Dawal, Siti Zawiah; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell. PMID:25360663

Virtual reality based support system for layout planning and programming of an industrial robotic work cell.

PubMed

Yap, Hwa Jen; Taha, Zahari; Dawal, Siti Zawiah Md; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell.

Quality and Characteristics of the North Carolina Pre-Kindergarten Program: 2011-2012 Statewide Evaluation. Executive Summary

ERIC Educational Resources Information Center

Peisner-Feinberg, Ellen; Schaaf, Jennifer; Hildebrandt, Lisa; LaForett, Dore

2013-01-01

The North Carolina Pre-Kindergarten Program (NC Pre-K) is a state-funded initiative for at-risk 4-year-olds, designed to provide a high quality, classroom-based educational program during the year prior to kindergarten entry. Children are eligible for NC Pre-K based on age, family income (at or below 75% of state median income), and other risk…

The Effectiveness of a Suggested Program Based on Combining the Direct and the Indirect Strategies on Developing the EFL Al-Azhr Secondary School Students' Strategic Competence Skills

ERIC Educational Resources Information Center

Elshirbini Abdel-fattah Al-Ashrii, Ismail Ibrahim

2011-01-01

This study aimed to examine the effectiveness of using a suggested program based on integrating the direct and indirect approaches on developing Strategic Competence skills of EFL secondary school students. The study adopted the experimental design. One group was an experimental group (using the suggested program) and another group worked as the…

A Strength-Based Arts and Play Support Program for Young Survivors in Post-Quake China: Effects on Self-Efficacy, Peer Support, and Anxiety

ERIC Educational Resources Information Center

Ho, Rainbow T. H.; Lai, Angel H. Y.; Lo, Phyllis H. Y.; Nan, Joshua K. M.; Pon, Alicia K. L.

2017-01-01

A year after the earthquake in Sichuan, China, a strength-based arts and play support program was launched to promote the well-being of young survivors, and this study was designed to examine its effectiveness. It was hypothesized that participation in the program would have direct positive effects on general self-efficacy and peer support, and…

Cloud based, Open Source Software Application for Mitigating Herbicide Drift

NASA Astrophysics Data System (ADS)

Saraswat, D.; Scott, B.

2014-12-01

The spread of herbicide resistant weeds has resulted in the need for clearly marked fields. In response to this need, the University of Arkansas Cooperative Extension Service launched a program named Flag the Technology in 2011. This program uses color-coded flags as a visual alert of the herbicide trait technology within a farm field. The flag based program also serves to help avoid herbicide misapplication and prevent herbicide drift damage between fields with differing crop technologies. This program has been endorsed by Southern Weed Science Society of America and is attracting interest from across the USA, Canada, and Australia. However, flags have risk of misplacement or disappearance due to mischief or severe windstorms/thunderstorms, respectively. This presentation will discuss the design and development of a cloud-based, free application utilizing open-source technologies, called Flag the Technology Cloud (FTTCloud), for allowing agricultural stakeholders to color code their farm fields for indicating herbicide resistant technologies. The developed software utilizes modern web development practices, widely used design technologies, and basic geographic information system (GIS) based interactive interfaces for representing, color-coding, searching, and visualizing fields. This program has also been made compatible for a wider usability on different size devices- smartphones, tablets, desktops and laptops.

Evaluation of materials and design modifications for aircraft brakes

NASA Technical Reports Server (NTRS)

Ho, T. L.; Kennedy, F. E.; Peterson, M. B.

1975-01-01

A test program is described which was carried out to evaluate several proposed design modifications and several high-temperature friction materials for use in aircraft disk brakes. The evaluation program was carried out on a specially built test apparatus utilizing a disk brake and wheel half from a small het aircraft. The apparatus enabled control of brake pressure, velocity, and braking time. Tests were run under both constant and variable velocity conditions and covered a kinetic energy range similar to that encountered in aircraft brake service. The results of the design evaluation program showed that some improvement in brake performance can be realized by making design changes in the components of the brake containing friction material. The materials evaluation showed that two friction materials show potential for use in aircraft disk brakes. One of the materials is a nickel-based sintered composite, while the other is a molybdenum-based material. Both materials show much lower wear rates than conventional copper-based materials and are better able to withstand the high temperatures encountered during braking. Additional materials improvement is necessary since both materials show a significant negative slope of the friction-velocity curve at low velocities.

Methods for the evaluation of the Jamie Oliver Ministry of Food program, Australia

PubMed Central

2013-01-01

Background Community-based programs aimed at improving cooking skills, cooking confidence and individual eating behaviours have grown in number over the past two decades. Whilst some evidence exists to support their effectiveness, only small behavioural changes have been reported and limitations in study design may have impacted on results. This paper describes the first evaluation of the Jamie Oliver Ministry of Food Program (JMoF) Australia, in Ipswich, Queensland. JMoF Australia is a community-based cooking skills program open to the general public consisting of 1.5 hour classes weekly over a 10 week period, based on the program of the same name originating in the United Kingdom. Methods/Design A mixed methods study design is proposed. Given the programmatic implementation of JMoF in Ipswich, the quantitative study is a non-randomised, pre-post design comparing participants undergoing the program with a wait-list control group. There will be two primary outcome measures: (i) change in cooking confidence (self-efficacy) and (ii) change in self-reported mean vegetable intake (serves per day). Secondary outcome measures will include change in individual cooking and eating behaviours and psycho-social measures such as social connectedness and self-esteem. Repeated measures will be collected at baseline, program completion (10 weeks) and 6 months follow up from program completion. A sample of 250 participants per group will be recruited for the evaluation to detect a mean change of 0.5 serves a day of vegetables at 80% power (0.5% significance level). Data analysis will assess the magnitude of change of these variables both within and between groups and use sub group analysis to explore the relationships between socio-demographic characteristics and outcomes. The qualitative study will be a longitudinal design consisting of semi-structured interviews with approximately 10-15 participants conducted at successive time points. An inductive thematic analysis will be conducted to explore social, attitudinal and behavioural changes experienced by program participants. Discussion This evaluation will contribute to the evidence of whether cooking programs work in terms of improving health and wellbeing and the underlying mechanisms which may lead to positive behaviour change. Trial registration Australian and New Zealand Trial registration number: ACTRN12611001209987. PMID:23631683

A hybrid nonlinear programming method for design optimization

NASA Technical Reports Server (NTRS)

Rajan, S. D.

1986-01-01

Solutions to engineering design problems formulated as nonlinear programming (NLP) problems usually require the use of more than one optimization technique. Moreover, the interaction between the user (analysis/synthesis) program and the NLP system can lead to interface, scaling, or convergence problems. An NLP solution system is presented that seeks to solve these problems by providing a programming system to ease the user-system interface. A simple set of rules is used to select an optimization technique or to switch from one technique to another in an attempt to detect, diagnose, and solve some potential problems. Numerical examples involving finite element based optimal design of space trusses and rotor bearing systems are used to illustrate the applicability of the proposed methodology.

What Cognitive Science May Learn from Instructional Design: A Case Study in Introductory Computer Programming.

ERIC Educational Resources Information Center

van Merrienboer, Jeroen J. G.

The contributions of instructional design to cognitive science are discussed. It is argued that both sciences have their own object of study, but share a common interest in human cognition and performance as part of instructional systems. From a case study based on experience in teaching introductory computer programming, it is concluded that both…

Using Robotics and Game Design to Promote Pathways to STEM

ERIC Educational Resources Information Center

Leonard, Jacqueline; Buss, Alan; Unertl, Adrienne; Mitchell, Monica

2016-01-01

This research report presents the results of a STEM summer program on robotics and game design. The program was part of a three-year study funded by the National Science Foundation. Children in grades four through six participated in a two-week summer camp in 2015 to learn STEM by engaging in LEGO® EV3 robotics and computer-based games using…

Joint Services Electronics Program

DTIC Science & Technology

1992-03-05

Packaging Considerations M. T. Raghunath (Professor Abhiram Ranade) A central issue in massively parallel computation is the design of the interconnection...programs on promising network architectures. Publications: [1] M. T. Raghunath and A. G. Ranade, A Simulation-Based Compari- son of Interconnection Networks...more difficult analog function approximation task. Network Design Issues for Fast Global Communication Professor A. Ranade with M.T. Raghunath A

Experimental Effects of Word Generation on Vocabulary, Academic Language, and Perspective Taking in High Poverty Middle Schools

ERIC Educational Resources Information Center

Jones, Stephanie M.; Kim, James; LaRusso, Maria; Kim, Ha Yeon; Selman, Robert; Uccelli, Paola; Barnes, Sophie; Donovan, Suzanne; Snow, Catherine

2016-01-01

Word Generation (WG) is a research-based vocabulary program for middle school students designed to teach words through language arts, math, science, and social studies classes. The program consists of weekly units that introduce 5 high-utility target words through brief passages designed to spark active examination and discussion of contemporary…

CNN-coupled Humanoid Panoramic Annular Lens (PAL)-Optical System for Military Applications (Feasibility Study)

DTIC Science & Technology

2002-01-08

new PAL with a total viewing angle of around 80° and suitable for foveal vision, it turned out that the optical design program ZEMAX EE we intended to...use was not capable for optimization. The reason was that ZEMAX -EE and all present optical design programs are based on see-through-window (STW