Development of a Design for Evaluation of the Podiatric Medicine Training Grant Program. Final Report and Executive Summary.

ERIC Educational Resources Information Center

American Association of Colleges of Podiatric Medicine, Washington, DC.

Information is presented on an evaluation design for a federal program, the Podiatric Medicine Training Grant Program. The program supports the clinical training of third- and fourth-year podiatric medical students in underserved areas. Background information is provided on: the supply and distribution of health professionals and podiatrists in…

Design, fabrication and acceptance testing of a zero gravity whole body shower

NASA Technical Reports Server (NTRS)

Schumacher, E. A.; Lenda, J. A.

1974-01-01

Recent research and development programs have established the ability of the zero gravity whole body shower to maintain a comfortable environment in which the crewman can safely cleanse and dry the body. The purpose of this program was to further advance the technology of whole body bathing and to demonstrate technological readiness including in-flight maintenance by component replacement for flight applications. Three task efforts of this program are discussed. Conceptual designs and system tradeoffs were accomplished in task 1. Task 2 involved the formulation of preliminary and final designs for the shower, while task 3 included the fabrication and test of the shower assembly. Particular attention is paid to the evaluation and correction of test anomalies during the final phase of the program.

A Model Pilot Program for Training Personnel to Develop Solutions to Major Educational Problems. Final Report.

ERIC Educational Resources Information Center

Cullinan, Paul A.; Merrifield, Philip R.

This document is the final report of the Model Educational Research Training (MERT) program, a graduate program of the New York University School of Education. MERT trains urban school staff in skills necessary to identify problems, design valid research projects, and apply research results. The long-term objective is the training of small groups…

75 FR 53786 - Senior Community Service Employment Program; Final Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... the 2006 OAA, that the SCSEP is designed to ``[i]ncrease the number of persons who may enjoy the... State Plan is ``statewide.'' That is to say, it is designed to cover all program activities that will...

EnergyWorks Final Report: A Better Buildings Neighborhood Program in the Five-County Greater Philadelphia Region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gajewski, Katherine

2014-03-05

This report covers the grant performance period of July 1, 2010-September 30, 2013 and discusses of the program design, outcomes and best practices as they relate to the following six areas: 1. Institutional Design and Business Model; 2. Program Design and Customer Experience; 3. Driving Demand; 4. Workforce Development; 5. Financing and Incentives; 6. Data and Evaluation.

Revised Study Design for Final Phase of the Change Agent Study. Study of Change Agent Programs: A Working Note.

ERIC Educational Resources Information Center

Bass, G.; And Others

The Rand change agent study was designed to determine the factors for successful implementation and continuation of selected federal programs--the Elementary and Secondary Education Act, Title III, Innovation Projects; ESEA Title VII, Bilingual Projects; Vocational Education Part D, Exemplary Programs; and the Right-to-Read program. This report…

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

Job Skills Education Program. Final Technical Report.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Educational Technology.

This publication provides materials developed by a project designed to transfer a U.S. Army computer-based basic skills curriculum to applications in the vocational skills development of civilian adults. An executive summary of the final report describes the Job Skills Education Program (JSEP), which teaches academic skills that support vocational…

78 FR 5035 - Final Priorities; Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... flexibility where possible, and develop and implement a study design that would answer important questions... basic design requirements--for both program management and evaluation purposes--for data and account... commenter stated that based on its experience with schools, local governments, and others in the design and...

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fredrickson, Daniel C

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

A Preservation Program for the Colorado State University Libraries. The Final Report of the ARL/OMS Preservation Planning Program.

ERIC Educational Resources Information Center

Green, Stephen; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the Colorado State University Library (CSUL) working with the Association of Research Libraries' (ARL) Office of Management Studies (OMS). Designed to put self-help tools into the hands of library staff responsible for developing plans and procedures…

NIE Final Report. Vermont Special Purpose Grant, January 1979 through September 1979 [and] Evaluation of the Resource Agent Program.

ERIC Educational Resources Information Center

Perry, Mary; Miller, Pamela A.

Vermont's adaptation of a federal Resource Agent Program (RAP), designed to meet the in-service training needs of teachers, is described in this final report. Part of a complete dissemination system, RAP was funded as a pilot program to initiate a collection of Vermont-originated resources to be entered into a state educational database. Described…

Final report bridge design system analysis and modernization.

DOT National Transportation Integrated Search

2016-09-27

The Bridge Design System (BDS) is an in-house software program developed by the Michigan Department of Transportations : (MDOT) Bridge Design Unit. The BDS designs bridges according to the required specifications, and outputs corresponding design ...

Advanced Design Program (ARIES) Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tillack, Mark

2016-02-16

Progress is reported for the ARIES 3-year research program at UC San Diego, including three main tasks: 1. Completion of ARIES research on PMI/PFC issues. 2. Detailed engineering design and analysis of divertors and first wall/blankets. 3. Mission & requirements of FNSF.

Integrating computer programs for engineering analysis and design

NASA Technical Reports Server (NTRS)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

Mod-5A wind turbine generator program design report. Volume 3: Final design and system description, book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 3, book 1 describes the performance and characteristics of the MOD-5A wind turbine generator in its final configuration. Each subsystem - the rotor, drivetrain, nacelle, tower and foundation is described in detail.

Spacecraft System Integration and Test: SSTI Lewis critical design audit

NASA Technical Reports Server (NTRS)

Brooks, R. P.; Cha, K. K.

1995-01-01

The Critical Design Audit package is the final detailed design package which provides a comprehensive description of the SSTI mission. This package includes the program overview, the system requirements, the science and applications activities, the ground segment development, the assembly, integration and test description, the payload and technology demonstrations, and the spacecraft bus subsystems. Publication and presentation of this document marks the final requirements and design freeze for SSTI.

Revision of Electro-Mechanical Drafting Program to Include CAD/D (Computer-Aided Drafting/Design). Final Report.

ERIC Educational Resources Information Center

Snyder, Nancy V.

North Seattle Community College decided to integrate computer-aided design/drafting (CAD/D) into its Electro-Mechanical Drafting Program. This choice necessitated a redefinition of the program through new curriculum and course development. To initiate the project, a new industrial advisory council was formed. Major electronic and recruiting firms…

2+2+2 Dissemination Project Final Report.

ERIC Educational Resources Information Center

Sloane, Diana; And Others

An overview is provided in this three-part final report of a project designed to disseminate information to assist California high schools, Regional Occupation Programs, and colleges in developing and strengthening 2+2+2 programs. Part I reviews the following project objectives: (1) hire a project coordinator and technical assistant; (2) develop a…

After School Centers Project. Final Reports. Winter 1968-1969; Summer 1969.

ERIC Educational Resources Information Center

Harvard Univ., Cambridge, MA. Graduate School of Education.

Two final reports, winter 1968-1969 and summer 1969, respectively describe the sixth and seventh sessions of the Cambridge School Department's After School Center Program and involving six elementary schools. Both the winter and the summer programs were designed to give disadvantaged children remedial instruction in reading and mathematics along…

High Pressure Reverse Flow APS Engine

NASA Technical Reports Server (NTRS)

Senneff, J. M.

1972-01-01

A design and test demonstration effort was undertaken to evaluate the concept of the reverse flow engine for the APS engine application. The 1500 lb (6672 N) thrust engine was designed to operate on gaseous hydrogen and gaseous oxygen propellants at a mixture ratio of 4 and to achieve the objective performance of 435 sec (4266 Nsec/kg) specific impulse. Superimposed durability requirements called for a million-cycle capability with 50 hours duration. The program was undertaken as a series of tasks including the initial preliminary design, design of critical test components and finally, the design and demonstration of an altitude engine which could be used interchangeably to examine operating parameters as well as to demonstrate the capability of the concept. The program results are reported with data to indicate that all of the program objectives were met or exceeded within the course of testing on the program. The analysis effort undertaken is also reported in detail and supplemented with test data in some cases where prior definitions could not be made. The results are contained of these analyses as well as the test results conducted throughout the course of the program. Finally, the test data and analytical results were combined to allow recommendations for a flight weight design. This preliminary design effort is also detailed.

Pressure fed thrust chamber technology program

NASA Technical Reports Server (NTRS)

Dunn, Glenn M.

1992-01-01

This is the final report for the Pressure Fed Technology Program. It details the design, fabrication and testing of subscale hardware which successfully characterized LOX/RP combustion for a low cost pressure fed design. The innovative modular injector design is described in detail as well as hot-fire test results which showed excellent performance. The program summary identifies critical LOX/RP design issues that have been resolved by this testing, and details the low risk development requirements for a low cost engine for future Expendable Launch Vehicles (ELVi).

Creating the Action Model for High Risk Infant Follow Up Program in Iran.

PubMed

Heidarzadeh, Mohammad; Jodiery, Behzad; Mirnia, Kayvan; Akrami, Forouzan; Hosseini, Mohammad Bagher; Heidarabadi, Seifollah; HabibeLahi, Abbas

2013-11-01

Intervention in early childhood development as one of the social determinants of health, is important for reducing social gap and inequity. In spite of increasingly developing intensive neonatal care wards and decreasing neonatal mortality rate, there is no follow up program in Iran. This study was carreid out to design high risk infants follow up care program with the practical aim of creating an model action for whole country, in 2012. This qualitative study has been done by the Neonatal Department of the Deputy of Public Health in cooperation with Pediatrics Health Research Center of Tabriz University of Medical Sciences, Iran. After study of international documents, consensus agreement about adapted program for Iran has been accomplished by focus group discussion and attended Delphi agreement technique. After compiling primary draft included evidence based guidelines and executive plan, 14 sessions including expert panels were hold to finalize the program. After finalizing the program, high risk infants follow up care service package has been designed in 3 chapters: Evidence based clinical guidelines; eighteen main clinical guidelines and thirteen subsidiaries clinical guidelines, executive plan; 6 general, 6 following up and 5 backup processes. Education program including general and especial courses for care givers and follow up team, and family education processes. We designed and finalized high risk infants follow up care service package. It seems to open a way to extend it to whole country.

Engine System Loads Analysis Compared to Hot-Fire Data

NASA Technical Reports Server (NTRS)

Frady, Gregory P.; Jennings, John M.; Mims, Katherine; Brunty, Joseph; Christensen, Eric R.; McConnaughey, Paul R. (Technical Monitor)

2002-01-01

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the NASA MC-1 engine program, the focus was to reduce the cost-to-weight ratio. The techniques for structural dynamics analysis practices, were tailored in this program to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of MC-1 load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are important during the design and integration of a new engine system. During the final stages of development, it is important to verify the results of an engine system model to determine the validity of the results. During the final stages of the MC-1 program, hot-fire test results were obtained and compared to the structural design loads calculated by the engine system model. These comparisons are presented in this paper.

Federal Employees Health Benefits Program and Federal Employees Dental and Vision Insurance Program: eligibility for Pathway Programs participants. Interim final rule with request for comments.

PubMed

2014-01-06

The U.S. Office of Personnel Management (OPM) is issuing an interim final regulation to update the Federal Employees Health Benefits Program (FEHBP) and the Federal Employees Dental and Vision Insurance Program (FEDVIP) regulations to reflect updated election opportunities for participants in the Pathways Programs. The Pathways Programs were created by Executive Order (E.O.) 13562, signed by the President on December 27, 2010, and are designed to enable the Federal Government to compete effectively for students and recent graduates by improving its recruitment efforts through internships and similar programs with Federal agencies. This interim final rule furthers these recruitment and retention efforts by providing health insurance, as well as dental and vision benefits, to eligible program participants and their families.

Design-Tradeoff Model For Space Station

NASA Technical Reports Server (NTRS)

Chamberlain, Robert G.; Smith, Jeffrey L.; Borden, Chester S.; Deshpande, Govind K.; Fox, George; Duquette, William H.; Dilullo, Larry A.; Seeley, Larry; Shishko, Robert

1990-01-01

System Design Tradeoff Model (SDTM) computer program produces information which helps to enforce consistency of design objectives throughout system. Mathematical model of set of possible designs for Space Station Freedom. Program finds particular design enabling station to provide specified amounts of resources to users at lowest total (or life-cycle) cost. Compares alternative design concepts by changing set of possible designs, while holding specified services to users constant, and then comparing costs. Finally, both costs and services varied simultaneously when comparing different designs. Written in Turbo C 2.0.

GPHS RTGs in Support of the Cassini RTG Program. Final Technical Report, January 11, 1991 - April 30, 1998

DOE R&D Accomplishments Database

1998-08-01

As noted in the historical summary, this program encountered a number of changes in direction, schedule, and scope over the period 11 January 1991 to 31 December 1998. The report provides a comprehensive summary of all the varied aspects of the program over its seven and a quarter years, and highlights those aspects that provide information beneficial to future radioisotope programs. In addition to summarizing the scope of the Cassini GPHS RTG Program provided as background, the introduction includes a discussion of the scope of the final report and offers reference sources for information on those topics not covered. Much of the design heritage of the GPHS RTG comes from the Multi Hundred Watt (MHW) RTGs used on the Lincoln Experimental Satellites (LES) 8/9 and Voyager spacecraft. The design utilized for the Cassini program was developed, in large part, under the GPHS RTG program which produced the Galileo and Ulysses RTGs. Reports from those programs included detailed documentation of the design, development, and testing of converter components and full converters that were identical to, or similar to, components used in the Cassini program.

SNAP (Space Nuclear Auxiliary Power) reactor overview. Final report, June 1982-December 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voss, S.S.

1984-08-01

The SNAP reactor programs are outlined in this report. A summary of the program is included along with a technical outline of the SER, S2DR, SNAP 10A/SNAPSHOT, S8ER, and S8DR reactor systems. Specifications of the designs, the design logic and a conclusion outlining some of the program weaknesses are given.

Demonstration Training Program for Improving the Capacity of Primary Care Units to Function Within an HMO Setting. Final Report.

ERIC Educational Resources Information Center

Detroit Medical Foundation, MI.

The Demonstration Training Program (DTP) undertaken by the Detroit Medical Foundation (DMF) was designed for Primary Care Unit staffs (PCUs) or Physician Corporations (PCs), area health center providers under contract to the Michigan Health Maintenance Organization Plans, Inc. (MHMOP). The major goals of the program were to design an appropriate…

Early Childhood and Parenting Research Program. Final Report.

ERIC Educational Resources Information Center

Gotts, E. E.

This final report reviews and evaluates the work completed by the Early Childhood and Parenting Research Program between June 1, 1978 and November 30, 1979. The first project described is the Home Oriented Preschool Education (HOPE) Follow-Up Study. The HOPE Follow-Up Study was designed to examine the effects of HOPE treatments on children and…

Preservation Planning Program. Study Report. Iowa State University Library. Final Report.

ERIC Educational Resources Information Center

Galejs, John; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the Iowa State University, working with the Association of Research Libraries' (ARL) Office of Management Studies. The PPP is designed to put self-help tools into the hands of library staff responsible for developing plans and procedures for preserving…

"The Inclusion Facilitator Training Program": Personnel Preparation To Serve Children with Low-Incidence Disabilities. Final Report.

ERIC Educational Resources Information Center

Jorgensen, Cheryl M.

This final report describes the activities and accomplishments of the "Inclusion Facilitator Training Program," a 3-year, federally funded project of the Institute on Disability at the University of New Hampshire. The project was designed to train special education teachers (either currently practicing or graduate students) in current…

A Statewide Faculty Development Program for Community College Associate Degree and Other Nursing Educators. Final Report.

ERIC Educational Resources Information Center

Roush, Robert E.; And Others

This final report describes a Texas educational improvement project designed to: (1) increase the amount of geriatric content in the curricula of community college associate degree nursing (ADN) programs; (2) further the development of baccalaureate nursing faculty in a Historically Black College/University (HBCU); and (3) facilitate other Texas…

Program for the improvement of downhole drilling motor bearings and seals. Phase V. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeLafosse, P.H.; Tibbitts, G.A.; Black, A.D.

1983-08-01

The work done during the fifth and final phase of a program to improve downhole drilling motor bearing and seals is described. The principal activities in this phase were: (a) testing seals with abrasive-laden mud on the low-pressure side; (b) test second and third generation designs of both elastomeric chevron seals and Teflon U-seals; and (c) testing a full-scale bearing/seal package. Several operating parameters which have a radical effect on seal life were identified, and some promising designs and materials were tested.

Foreign Language/Area Studies Enhancement Project. Final Report.

ERIC Educational Resources Information Center

Felker, William; Fuller, Clark

The Foreign Language/Area Studies Enhancement Program at Central State University (Ohio) is an experience-centered work and study program in Africa designed to give students training in language, culture, and technology. It parallels and supports the university's northern Senegal water management project designed to promote self-sufficiency among…

Utah Teacher Evaluation Project: The Park City Career Ladder Design. Final Report: Secretary's Discretionary Program, Planning Grant to Develop Teacher Incentive Programs.

ERIC Educational Resources Information Center

Peterson, Ken; And Others

The Park City School District (Utah) career ladder design provides a system in which teachers are positioned and paid according to successful performance and differentiation of responsibilities. It includes an evaluation system to differentiate among teachers. The career ladder design presents a number of innovations; for example, excellent…

Development of a Test for an Experimental Research Program in Creative Problem Solving. Final Report.

ERIC Educational Resources Information Center

Miles, David T.

The purpose of this first phase of a continuing research program was the development of a test of creative problem solving in general design. A design class of 186 members was divided into an experimental and control group; a non-design control group (an educational psychology class) of 45 was also tested. Multivariate interpretation of creative…

NASA gear research and its probable effect on rotorcraft transmission design

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Townsend, D. P.; Coy, J. J.

1979-01-01

The NASA Lewis Research Center devised a comprehensive gear technology research program beginning in 1969, the results of which are being integrated into the NASA civilian Helicopter Transmission System Technology Program. Attention is given to the results of this gear research and those programs which are presently being undertaken. In addition, research programs studying pitting fatigue, gear steels and processing, life prediction methods, gear design and dynamics, elastohydrodynamic lubrication, lubrication methods and gear noise are presented. Finally, the impact of advanced gear research technology on rotorcraft transmission design is discussed.

Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-12-04

The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion

NASA Technical Reports Server (NTRS)

Hanley, David; Carella, John

1999-01-01

This document, submitted by AlliedSignal Engines (AE), a division of AlliedSignal Aerospace Company, presents the program final report for the Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion in compliance with data requirements in the statement of work, Contract No. NAS3-97003. This document includes: 1 -Technical Summary: a) Component Design, b) Manufacturing Process Selection, c) Vendor Selection, and d) Testing Validation: 2-Program Conclusion and Perspective. Also, see the Appendix at the back of this report. This report covers the program accomplishments from December 1, 1996, to August 24, 1998. The Advanced High Temperature PMC's for Gas Turbine Engines Program Expansion was a one year long, five task technical effort aimed at designing, fabricating and testing a turbine engine component using NASA's high temperature resin system AMB-21. The fiber material chosen was graphite T650-35, 3K, 8HS with UC-309 sizing. The first four tasks included component design and manufacturing, process selection, vendor selection, component fabrication and validation testing. The final task involved monthly financial and technical reports.

Final Report for the Intensified Career Exploration Program.

ERIC Educational Resources Information Center

McCauley, Lynne D.; Rusling, Diane E.

An intensified Career Exploration Program was evaluated through an analysis of the cognitive and affective learning resulting from ninth- and tenth-grade students' participation in the program. Designed to supplement the existing ninth- and tenth-grade components of the Ohio Career Development Program, this three-year program offered additional…

Pressure fed thrust chamber technology program

NASA Technical Reports Server (NTRS)

Dunn, Glen M.

1992-01-01

This is the final report for the Pressure Fed Technology Program. It details the design, fabrication, and testing of subscale hardware which successfully characterized Liquid Oxygen Rocket Propulsion (LOX/RP) combustion for low cost pressure fed design. The innovative modular injector design is described in detail as well as hot-fire test results which showed excellent performance. The program summary identifies critical LOX/RP design issues that have been resolved in this testing, and details the low risk development requirements for low cost engines for future Expandable Launch Vehicles (ELV).

The comprehensive community-based traffic safety program : phase II, program assessment for District 2 and District 7, final report.

DOT National Transportation Integrated Search

1987-01-01

The program assessment phase was designed to identify community resources and address the recommendation, made in Phase I, that initial countermeasures should target the program areas of occupant protection, alcohol, selective enforcement, and pedest...

Worker Education Program 1994-97. Final Evaluation Report.

ERIC Educational Resources Information Center

Larson, Katherine E.

An evaluation examined the efficacy of the program structure, implementation, and outcomes of the Worker Education Program (WEP), a partnership of Northeastern Illinois University; Union of Needletrades, Industrial, and Textile Employees; and 14 employers. WEP's greatest strengths were its conceptual design, program structures, relevant…

Final system instrumentation design package for Decade 80 solar house

NASA Technical Reports Server (NTRS)

1978-01-01

The final configuration of the Decade 80 solar house to monitor and collect system performance data is presented. A review demonstrated by actual operation that the system and the data acquisition subsystem operated satisfactorily and installation of instrumentation was in accordance with the design. This design package is made up of (1) site and system description, (2) operating and control modes, and (3) instrumentation program (including sensor schematic).

Maine PACE Program Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fischer, Dana; Adamson, Joy M

The ARRA EECBG BetterBuilding helped augment the existing Home Energy Savings Programs (HESP) and incentives with financing through a subordinate lien PACE and HUD PowerSaver programs. The program was designed to document innovative techniques to dramatically increase the number of homes participating in weatherization programs in participating towns. Maine will support new energy efficiency retrofit pilots throughout the state, designed to motivate a large number of homeowners to invest in comprehensive home energy efficiency upgrades to bring real solutions to market.

Final Accumulative Results & Transfer of Knowledge of the Arizona Career Ladder Research & Evaluation Project: Impact on Student Achievement, Formulated Models, Network Anecdotes, & Recommendations to the Legislature for Policy Development, Program Continuation & State-Wide Expansion. Summative Report VIII.

ERIC Educational Resources Information Center

Packard, Richard D.; Dereshiwsky, Mary I.

This paper presents research findings concerning the Career Ladder pilot test program in Arizona. The program is designed to reward and motivate teachers based on performance. One of the program's key features is the flexibility and innovation allowed to participating districts in their individual development of program designs and structures. An…

COMPUTER-AIDED DRAFTING AND DESIGN, A THREE-WEEK SUMMER INSTITUTE TRAINING PROGRAM (MIAMI-DADE JUNIOR COLLEGE, MIAMI, FLORIDA, JULY 10, 1967 - JULY 28, 1967). FINAL REPORT.

ERIC Educational Resources Information Center

MORPHONIOS, ALEX G.

THIRTY-SIX INSTRUCTORS, SUPERVISORS, AND DEPARTMENT CHAIRMEN IN AREAS OF DRAFTING, ENGINEERING, MANUFACTURING, AND COMPUTER TECHNOLOGY AT JUNIOR COLLEGES, TECHNICAL, AND AREA VOCATIONAL SCHOOLS IN 20 STATES ATTENDED A 3-WEEK SUMMER INSTITUTE TRAINING PROGRAM ON COMPUTER-AIDED DRAFTING AND DESIGN. EXPERIENCE IN PROGRAMING THE IBM SYSTEM 1620 WITH…

Creating the Action Model for High Risk Infant Follow Up Program in Iran

PubMed Central

Heidarzadeh, Mohammad; Jodiery, Behzad; Mirnia, Kayvan; Akrami, Forouzan; Hosseini, Mohammad Bagher; Heidarabadi, Seifollah; HabibeLahi, Abbas

2013-01-01

Abstract Background Intervention in early childhood development as one of the social determinants of health, is important for reducing social gap and inequity. In spite of increasingly developing intensive neonatal care wards and decreasing neonatal mortality rate, there is no follow up program in Iran. This study was carreid out to design high risk infants follow up care program with the practical aim of creating an model action for whole country, in 2012. Methods This qualitative study has been done by the Neonatal Department of the Deputy of Public Health in cooperation with Pediatrics Health Research Center of Tabriz University of Medical Sciences, Iran. After study of international documents, consensus agreement about adapted program for Iran has been accomplished by focus group discussion and attended Delphi agreement technique. After compiling primary draft included evidence based guidelines and executive plan, 14 sessions including expert panels were hold to finalize the program. Results After finalizing the program, high risk infants follow up care service package has been designed in 3 chapters: Evidence based clinical guidelines; eighteen main clinical guidelines and thirteen subsidiaries clinical guidelines, executive plan; 6 general, 6 following up and 5 backup processes. Education program including general and especial courses for care givers and follow up team, and family education processes. Conclusion We designed and finalized high risk infants follow up care service package. It seems to open a way to extend it to whole country. PMID:26171344

Preparing Personnel To Work with Children with Serious Emotional Disturbance and Autism, 9/01/99-12/31/02. Final Report.

ERIC Educational Resources Information Center

McCuller, Glen

This final report describes activities and accomplishments of a 3-year federally supported personnel preparation program at Stephen F. Austin University (Texas) to train graduate-level personnel to serve children and youth with serious emotional disturbance and autism (SED/A). The program was designed to recruit, train, and seek employment in…

NASA aeronautics R&T - A resource for aircraft design

NASA Technical Reports Server (NTRS)

Olstad, W. B.

1981-01-01

This paper discusses the NASA aeronautics research and technology program from the viewpoint of the aircraft designer. The program spans the range from fundamental research to the joint validation with industry of technology for application into product development. Examples of recent developments in structures, materials, aerodynamics, controls, propulsion systems, and safety technology are presented as new additions to the designer's handbook. Finally, the major thrusts of NASA's current and planned programs which are keyed to revolutionary advances in materials science, electronics, and computer technology are addressed.

Development and Implementation of a Model Training Program to Assist Special Educators, Parks and Resource Management Personnel and Parents to Cooperatively Plan and Conduct Outdoor/Environmental Education Programs for Handicapped Children and Youth. Final Report.

ERIC Educational Resources Information Center

Vinton, Dennis A.; Zachmeyer, Richard F.

This final report presents a description of a 3-year project to develop and implement a model training program (for special education personnel, park and resource management personnel, and parents of disabled children) designed to promote outdoor environmental education for disabled children. The project conducted 22 training workshops (2-5 days)…

Thermal Environmental Testing of NSTAR Engineering Model Ion Thrusters

NASA Technical Reports Server (NTRS)

Rawlin, Vincent K.; Patterson, Michael J.; Becker, Raymond A.

1999-01-01

NASA's New Millenium program will fly a xenon ion propulsion system on the Deep Space 1 Mission. Tests were conducted under NASA's Solar Electric Propulsion Technology Applications Readiness (NSTAR) Program with 3 different engineering model ion thrusters to determine thruster thermal characteristics over the NSTAR operating range in a variety of thermal environments. A liquid nitrogen-cooled shroud was used to cold-soak the thruster to -120 C. Initial tests were performed prior to a mature spacecraft design. Those results and the final, severe, requirements mandated by the spacecraft led to several changes to the basic thermal design. These changes were incorporated into a final design and tested over a wide range of environmental conditions.

Alpha Group: The Behemoth Apteryx. Final design proposal

NASA Technical Reports Server (NTRS)

1991-01-01

The participation of the University of Notre Dame's Alpha Design Group in the NASA/Universities Space Research Association (USRA) University Advanced Design Program for the 1990 to 1991 academic year is presented. Alpha Design Group presented a design for an aircraft called The Behemoth Apteryx.

76 FR 37090 - Final Priorities; Disability and Rehabilitation Research Projects and Centers Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... development of innovative technologies that are designed to solve particular rehabilitation problems, or to... of universal design in its product research and development. Universal design is the design of... adaptation or specialized design (North Carolina State University, 1997, The Center for Universal Design...

EZLP: An Interactive Computer Program for Solving Linear Programming Problems. Final Report.

ERIC Educational Resources Information Center

Jarvis, John J.; And Others

Designed for student use in solving linear programming problems, the interactive computer program described (EZLP) permits the student to input the linear programming model in exactly the same manner in which it would be written on paper. This report includes a brief review of the development of EZLP; narrative descriptions of program features,…

A computer program designed to produce tables from alphanumeric data

USGS Publications Warehouse

Ridgley, Jennie L.; Schnabel, Robert Wayne

1978-01-01

This program is designed to produce tables from alphanumeric data. Each line of data that appears in the table is entered into a data file as a single line of data. Where necessary, a predetermined delimiter is added to break up the data into column data. The program can process the following types of data: (1) title, (2) headnote, (3) footnote, (4) two levels of column headers, (5) solid lines, (6) blank lines, (7) most types of numeric data, and (8) all types of alphanumeric data. In addition, the program can produce a series of continuation tables from large data sets. Fitting of all data to the final table format is performed by the program, although provisions have been made for user-modification of the final format. The width of the table is adjustable, but may not exceed 158 characters per line. The program is useful in that it permits alteration of original data or table format without having to physically retype all or portions of the table. The final results may be obtained quickly using interactive terminals, and execution of the program requires only minimal knowledge of computer usage. Tables produced may be of publishable quality, especially when reduced. Complete user documentation and program listing are included. NOTE: Although this program has been subjected to many tests a warranty on accuracy or proper functioning is neither implied nor expressed.

Toroidal transformer design program with application to inverter circuitry

NASA Technical Reports Server (NTRS)

Dayton, J. A., Jr.

1972-01-01

Estimates of temperature, weight, efficiency, regulation, and final dimensions are included in the output of the computer program for the design of transformers for use in the basic parallel inverter. The program, written in FORTRAN 4, selects a tape wound toroidal magnetic core and, taking temperature, materials, core geometry, skin depth, and ohmic losses into account, chooses the appropriate wire sizes and number of turns for the center tapped primary and single secondary coils. Using the program, 2- and 4-kilovolt-ampere transformers are designed for frequencies from 200 to 3200 Hz and the efficiency of a basic transistor inverter is estimated.

Fifth SIAM conference on geometric design 97: Final program and abstracts. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The meeting was divided into the following sessions: (1) CAD/CAM; (2) Curve/Surface Design; (3) Geometric Algorithms; (4) Multiresolution Methods; (5) Robotics; (6) Solid Modeling; and (7) Visualization. This report contains the abstracts of papers presented at the meeting. Proceding the conference there was a short course entitled ``Wavelets for Geometric Modeling and Computer Graphics``.

Interdisciplinary Graduate Program: Rural Early Intervention Specialists for Low Incidence Disabilities (REIS/LID). Final Grant Performance Report [and] REIS/LID Student Guide.

ERIC Educational Resources Information Center

Maine Univ., Orono. Center for Community Inclusion.

This final report describes accomplishments and activities of a 3-year federally funded project of the University of Maine to develop and deliver a graduate Master's degree program in early intervention for infants and young children with low incidence disabilities. A curriculum was designed to prepare professionals to provide culturally relevant,…

A Model Program for Hearing-Handicapped Infants Providing Medical, Academic, and Psychological Services (HI-MAPS). Final Report, July 1979-June 1982.

ERIC Educational Resources Information Center

Stein, Laszlo; Pien, Diana

The document contains the final report of the HI-MAPS project, designed to develop a model program that would meet the medical, academic, and psychological needs of young hearing handicapped children, birth to 3 years, and their families in Chicago. An introductory section reviews project rationale, project philosophy, and overall project goals.…

Evaluation of Behavioral Change: Part 1: Study of Multi-Handicapped Young Children. Part 2: Interaction Between Program and Parents. Final Report.

ERIC Educational Resources Information Center

Gordon, Ronnie; And Others

Presented are the final reports of a two-part project designed to measure the effect of an intensive inpatient developmental program on 40 young multi-handicapped children (18-36 months old) and their parents. Part 1 describes a system developed and tested to record and analyze changes in child functioning. Reported are results from…

Neuropsychological Assessment and Training of Cognitive Processing Strategies for Reading Recognition and Comprehension: A Computer Assisted Program for Learning Disabled Students. Final Report.

ERIC Educational Resources Information Center

Teeter, Phyllis Anne; Smith, Philip L.

The final report of the 2-year project describes the development and validation of microcomputer software to help assess reading disabled elementary grade children and to provide basic reading instruction. Accomplishments of the first year included: design of the STAR Neuro-Cognitive Assessment Program which includes a reproduction of…

The Multi-Disciplinary Graduate Program in Educational Research. Final Report, Part IV; The Utilization of Sociological Ideas in Organizational Planning: A Case Study.

ERIC Educational Resources Information Center

Lazarsfeld, Paul F., Ed.

This document, the fourth in the final report on the Multi-Disciplinary Graduate Program in Educational Research, is a qualitative case study designed to show the form of sociological contributions to and the role of sociologists in policy formulation at an American Educational Research Association (AERA) colloquium. Discussions at the conference…

The Employment Retention and Advancement Project: How Effective Are Different Approaches Aiming to Increase Employment Retention and Advancement? Final Impacts for Twelve Models. Executive Summary

ERIC Educational Resources Information Center

Hendra, Richard; Dillman, Keri-Nicole; Hamilton, Gayle; Lundquist, Erika; Martinson, Karin; Wavelet, Melissa

2010-01-01

This report summarizes the final impact results for the national Employment Retention and Advancement (ERA) project. This project tested, using a random assignment design, the effectiveness of numerous programs intended to promote steady work and career advancement. All the programs targeted current and former welfare recipients and other low-wage…

Advanced engineering design program at the University of Illinois for the 1987-1988 academic year

NASA Technical Reports Server (NTRS)

Sivier, Kenneth R.; Lembeck, Michael F.

1988-01-01

The participation of the University of Illinois at Urbana-Champaign in the NASA/USRA Universities Advanced Engineering Design Program (Space) is reviewed for the 1987 to 88 academic year. The University's design project was the Manned Marsplane and Delivery System. In the spring of 1988 semester, 107 students were enrolled in the Aeronautical and Astronautical Engineering Departments' undergraduate Aerospace Vehicle Design course. These students were divided into an aircraft section (responsible for the Marsplane design), and a spacecraft section (responsible for the Delivery System Design). The design results are presented in Final Design Reports, copies of which are attached. In addition, five students presented a summary of the design results at the Program's Summer Conference.

Development of a Wheelchair Skills Home Program for Older Adults Using a Participatory Action Design Approach

PubMed Central

Giesbrecht, Edward M.; Miller, William C.; Mitchell, Ian M.; Woodgate, Roberta L.

2014-01-01

Restricted mobility is the most common impairment among older adults and a manual wheelchair is often prescribed to address these limitations. However, limited access to rehabilitation services results in older adults typically receiving little or no mobility training when they receive a wheelchair. As an alternative and novel approach, we developed a therapist-monitored wheelchair skills home training program delivered via a computer tablet. To optimize efficacy and adherence, principles of self-efficacy and adult learning theory were foundational in the program design. A participatory action design approach was used to engage older adult wheelchair users, care providers, and prescribing clinicians in an iterative design and development process. A series of prototypes were fabricated and revised, based on feedback from eight stakeholder focus groups, until a final version was ready for evaluation in a clinical trial. Stakeholder contributions affirmed and enhanced the foundational theoretical principles and provided validation of the final product for the target population. PMID:25276768

Space Solar Power Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arif, Humayun; Barbosa, Hugo; Bardet, Christophe

1992-08-01

Information pertaining to the Space Solar Power Program is presented on energy analysis; markets; overall development plan; organizational plan; environmental and safety issues; power systems; space transportation; space manufacturing, construction, operations; design examples; and finance.

Programming and machining of complex parts based on CATIA solid modeling

NASA Astrophysics Data System (ADS)

Zhu, Xiurong

2017-09-01

The complex parts of the use of CATIA solid modeling programming and simulation processing design, elaborated in the field of CNC machining, programming and the importance of processing technology. In parts of the design process, first make a deep analysis on the principle, and then the size of the design, the size of each chain, connected to each other. After the use of backstepping and a variety of methods to calculate the final size of the parts. In the selection of parts materials, careful study, repeated testing, the final choice of 6061 aluminum alloy. According to the actual situation of the processing site, it is necessary to make a comprehensive consideration of various factors in the machining process. The simulation process should be based on the actual processing, not only pay attention to shape. It can be used as reference for machining.

77 FR 75265 - Endangered and Threatened Wildlife and Plants; Termination of the Southern Sea Otter...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... designed and intended, we committed to a full and final evaluation of the program. We have now completed... its sea otter research project and would no longer be able to assist if we resumed capturing sea.... In light of our inability to implement the translocation program as designed and intended, we...

Energy Efficient Engine Flight Propulsion System Preliminary Analysis and Design Report

NASA Technical Reports Server (NTRS)

Bisset, J. W.; Howe, D. C.

1983-01-01

The final design and analysis of the flight propulsion system is presented. This system is the conceptual study engine defined to meet the performance, economic and environmental goals established for the Energy Efficient Engine Program. The design effort included a final definition of the engine, major components, internal subsystems, and nacelle. Various analytical representations and results from component technology programs are used to verify aerodynamic and structural design concepts and to predict performance. Specific design goals and specifications, reflecting future commercial aircraft propulsion system requirements for the mid-1980's, are detailed by NASA and used as guidelines during engine definition. Information is also included which details salient results from a separate study to define a turbofan propulsion system, known as the maximum efficiency engine, which reoptimized the advanced fuel saving technologies for improved fuel economy and direct operating costs relative to the flight propulsion system.

78 FR 41694 - Final Priority and Requirements; Education Facilities Clearinghouse

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... the collection and dissemination of best practices for the planning, design, financing, procurement... Facilities Clearinghouse program is to provide technical assistance and training on the planning, design... dissemination of best practices for the planning, design, financing, procurement, construction, improvement...

A Model System for the Design and Maintenance of Related Instruction Curriculum for Approved U.S. Department of Labor Apprenticeship Programs; Phase III. Final Report and Final Evaluation Report.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

A final report and final evaluation report of Phase III are provided for a project to establish a national clearinghouse for apprenticeship-related instructional materials. The final report provides a summary and a narrative account of these project activities: identification of materials; identification of apprenticeship curriculum needs;…

Narrowing the Skills Gap: Workplace Literacy Programs in Canada. Final Report.

ERIC Educational Resources Information Center

Ottawa Univ. (Ontario).

This report documents, in case study format, eight workplace literacy programs in Canada. Introductory materials highlight conclusions and discuss reasons for undertaking the project to document the Canadian experience in basic skills training from the perspective of the employer and employee and program design. Each case study or program profile…

Improving Occupational Orientation Programs for Junior High School Students in Metropolitan Areas. Final Report.

ERIC Educational Resources Information Center

Needham, Raymond; Binnie, Arthur

Participants representing 18 western states and 37 cities attended an inservice institute designed to (1) identify trends, (2) examine current innovative programs, (3) look at roadblock programs, and (4) develop impact plans to cause improvement in occupational programs in the participants' home cities and states. Participants, including…

Formative Evaluation of the Canada Student Loans Program. Final Report

ERIC Educational Resources Information Center

Human Resources and Skills Development Canada, 2004

2004-01-01

The "Formative Evaluation of the Canada Student Loans Program" was undertaken to assess issues of program relevance, design and delivery and for the purposes of examining the early impacts of changes made to the program since 1998. The evaluation also reviewed the Performance Measurement Strategy contained in the July 2002 Results-Based…

Evaluation of MPLM Design and Mission 6A Coupled Loads Analyses

NASA Technical Reports Server (NTRS)

Bookout, Paul S.; Ricks, Ed

1999-01-01

Through the development of a space shuttle payload, there are usually several coupled loads analyses (CLA) performed: preliminary design, critical design, final design and verification loads analysis (VLA). A final design CLA is the last analysis conducted prior to model delivery to the shuttle program for the VLA. The finite element models used in the final design CLA and the VLA are test verified dynamic math models. Mission 6A is the first of many flights of the Multi-Purpose Logistics Module (MPLM). The MPLM was developed by Alenia Spazio S.p.A. (an Italian aerospace company) and houses the International Standard Payload Racks (ISPR) for transportation to the space station in the shuttle. Marshall Space Flight Center (MSFC), the payload integrator of the MPLM for Mission 6A, performed the final design CLA using the M6.OZC shuttle data for liftoff and landing conditions using the proper shuttle cargo manifest. Alenia performed the preliminary and critical design CLAs for the development of the MPLM. However, these CLAs did not use the current Mission 6A cargo manifest. An evaluation of the preliminary and critical design performed by Alenia and the final design performed by MSFC is presented.

78 FR 49607 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

... reasonably designed to produce test results which measure energy efficiency, energy use or estimated annual... Energy Conservation Program: Test Procedures for Residential Clothes Dryers; Final Rule #0;#0;Federal... Conservation Program: Test Procedures for Residential Clothes Dryers AGENCY: Office of Energy Efficiency and...

Synthesis of calculational methods for design and analysis of radiation shields for nuclear rocket systems

NASA Technical Reports Server (NTRS)

Capo, M. A.; Disney, R. K.; Jordan, T. A.; Soltesz, R. G.; Woodsum, H. C.

1969-01-01

Eight computer programs make up a nine volume synthesis containing two design methods for nuclear rocket radiation shields. The first design method is appropriate for parametric and preliminary studies, while the second accomplishes the verification of a final nuclear rocket reactor design.

Roadmap to Measuring Distance Education Instructional Design Competencies

ERIC Educational Resources Information Center

Dooley, Kim E.; Lindner, James R.; Telg, Ricky W.; Irani, Tracy; Moore, Lori; Lundy, Lisa

2007-01-01

This study was designed to measure instructional design competencies as a result of participation in a 9-month Web-based training program called "Roadmap to Effective Distance Education Instructional Design." The researchers used a self-assessment pre- and posttest to determine participant initial and final competence in 12 areas: adult…

Capacitance discharge system for ignition of Single Bridge Apollo Standard Initiators (SBASI)

NASA Technical Reports Server (NTRS)

Ward, R. D.

1974-01-01

The design support data developed during the single bridge Apollo standard initiator (SBASI) program are presented. A circuit was designed and bread-board tested to verify operational capabilities of the circuit. Test data, design criteria, weight, and reliability trade-off considerations, and final design recommendations are reported.

Development of interactive hypermedia software for high school biology: A research and development study

NASA Astrophysics Data System (ADS)

Alturki, Uthman T.

The goal of this research was to research, design, and develop a hypertext program for students who study biology. The Ecology Hypertext Program was developed using Research and Development (R&D) methodology. The purpose of this study was to place the final "product", a CD-ROM for learning biology concepts, in the hands of teachers and students to help them in learning and teaching process. The product was created through a cycle of literature review, needs assessment, development, and a cycle of field tests and revisions. I applied the ten steps of R&D process suggested by Borg and Gall (1989) which, consisted of: (1) Literature review, (2) Needs assessment, (3) Planning, (4) Develop preliminary product, (5) Preliminary field-testing, (6) Preliminary revision, (7) Main field-testing, (8) Main revision, (9) Final field-testing, and (10) Final product revision. The literature review and needs assessment provided a support and foundation for designing the preliminary product---the Ecology Hypertext Program. Participants in the needs assessment joined a focus group discussion. They were a group of graduate students in education who suggested the importance for designing this product. For the preliminary field test, the participants were a group of high school students studying biology. They were the potential user of the product. They reviewed the preliminary product and then filled out a questionnaire. Their feedback and suggestions were used to develop and improve the product in a step called preliminary revision. The second round of field tasting was the main field test in which the participants joined a focus group discussion. They were the same group who participated in needs assessment task. They reviewed the revised product and then provided ideas and suggestions to improve the product. Their feedback were categorized and implemented to develop the product as in the main revision task. Finally, a group of science teachers participated in this study by reviewing the product and then filling out the questionnaire. Their suggestions were used to conduct the final step in R&D methodology, the final product revision. The primary result of this study was the Ecology Hypertext Program. It considered a small attempt to give students an opportunity to learn through an interactive hypertext program. In addition, using the R&D methodology was an ideal procedure for designing and developing new educational products and material.

76 FR 29251 - Agency Information Collection Activities: Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... programs that produce primary care providers and programs designed to increase the diversity of the health workforce. Finally, limited data will be collected in applications and/or at the time of award to provide...

Design of a Model Management Information System (MIS) for California's Regional Occupational Centers and Programs. Final Report.

ERIC Educational Resources Information Center

Dick, James C.; And Others

The management information system (MIS) development project for California's Regional Occupational Centers and Programs (ROC/Ps) was conducted in 3 phases over a 12-month period. Phase I involved a literature review and field study to match MIS design features and development strategy with existing conditions in ROC/Ps. A decision support system…

Programming Design Guide for Computer Implementation of Job Aid for Selecting Instructional Setting. Final Report.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

This Programming Design Guide (PDG) was developed to permit the offline Job Aid for Selecting Instructional Setting, which is one of 13 job aids presently available for use with the Instructional Systems Development (ISD) model, to be available in an inquiry-type, online version. It is intended to provide computer programmers with all of the…

Assessment of Quality Vocational Education in State Prisons. Successful Programs and the Components that Permit Them to Succeed. Final Report.

ERIC Educational Resources Information Center

Rice, Eric; And Others

The purpose of this research study was to discern, analyze, describe, and disseminate information about exemplary programs and the critical variables or strategies within program design that lead to reducing recidivism, increasing post-release employment, and increasing in-program success in vocational education programs located in adult-level…

Final priority; Rehabilitation Services Administration--Assistive Technology Alternative Financing Program. Final priority.

PubMed

2014-08-14

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Assistive Technology Alternative Financing Program administered by the Rehabilitation Services Administration (RSA). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. This priority is designed to ensure that the Department funds high-quality assistive technology (AT) alternative financing programs (AFPs) that meet rigorous standards in order to enable individuals with disabilities to access and acquire assistive technology devices and services necessary to achieve education, community living, and employment goals.

Development of Standards for Textiles and Clothing Postsecondary Programs. Final Report.

ERIC Educational Resources Information Center

Iowa State Univ. of Science and Technology, Ames. Dept. of Home Economics Education.

A project was conducted to validate program standards and performance standards for four postsecondary occupational areas--fashion merchandising, fashion design, apparel, and window treatment services. Returns from 117 questionnaires from postsecondary institutions in fifty states were used to develop program standards statements and to provide…

Child Services Demonstration Center Evaluation. Summary Report. (ESEA VI-G).

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

Presented is the final report of Colorado's Child Services Demonstration Project, designed to develop, implement, and evaluate a team staffing program to aid children with specific learning disabilities. The program is described in terms of rationale, replication, children served, staff activities (educational diagnosis, prescriptive programing,…

Community Pre-Retirement Training Program: Final Report and Statistical Summary.

ERIC Educational Resources Information Center

Wilson, Gary W.; Oerke, George

The Office of Continuing Education at Edison State Community College developed a community pre-retirement training curriculum, which was designed to make a flexible, practical, locally adaptable program available for use by corporations, chamber of commerce education committees, adult education programs, and public institutions. The objectives of…

District Survey I. Policy Research Corporation Analyses. Final Report.

ERIC Educational Resources Information Center

Policy Research Corp., Chicago, IL.

This study, mandated by Congress in the Education Amendments of 1974, was designed to produce estimates which describe the goals of compensatory programs, program operating characteristics, and evaluation techniques in use in compensatory programs. For the purpose of the study, the population sample was defined as all operating public school…

George W. Wingate High School Integrated Bilingual Career Education Program. Final Evaluation Report, 1978-1979.

ERIC Educational Resources Information Center

Irizarry, Ruddie A.; And Others

The Wingate High School Bilingual program served 280 limited English speaking Haitian students with Title VII funds. The program, which included students in grades 9 through 12, was designed to offer bilingual instruction and supportive services with the aim of mainstreaming program participants. Students received English as a Second Language…

Education Consolidation and Improvement Act--Chapter 1: Final Evaluation Report, Neglected and Delinquent Program.

ERIC Educational Resources Information Center

Chamberlain, Ed

This report recommends that the Neglected and Delinquent (ND) Program of the Columbus (Ohio) Public Schools, funded by the Education Consolidation and Improvement Act Chapter 1, be continued in the 1988-89 school year because the program provides a needed service to pupils in exceptional circumstances. The ND Program is designed to provide…

A Model Mentor/Advisor Program Supporting Secondary School Youth with Emotional and Behavioral Challenges and Their Families within Rural Vermont (October 1, 1996-September 30, 2000). Final Report.

ERIC Educational Resources Information Center

Welkowitz, Julie; Fox, Wayne L.

This final report discusses the activities and outcomes of the Mentor/Advisor Project, a program designed to promote positive self-concept and school success for high school students at risk of or experiencing emotional and behavioral disabilities in rural Vermont. The Project involved small groups of heterogeneous students (i.e., those with and…

MASS TRANSIT: FTA Could Relieve New Starts Program Funding Constraints

DTIC Science & Technology

2001-08-01

progress through a local or regional review of alternatives, develop preliminary engineering plans , and obtain FTA’s approval for final design.7 TEA-21...and transit programs can also be used to develop, plan , and/or construct these projects. 7The alternatives analysis stage provides information on the...include right-of-way acquisition, utility relocation, and the preparation of final construction plans and cost estimates. Background Page 5 GAO-01-987 New

Free Industry Flight Training of Inspectors - Federal Aviation Administration

DOT National Transportation Integrated Search

1997-12-09

This is our final report on the audit of Free Industry Flight Training of Federal Aviation Administration (FAA) flight standards" inspectors. We concluded that FAA's Aircrew Designated Examiner Program (Program), which is dependent on a "quid pro quo...

Mission definition study for Stanford relativity satellite. Volume 2: Engineering flight test program

NASA Technical Reports Server (NTRS)

1971-01-01

The need is examined for orbital flight tests of gyroscope, dewar, and other components, in order to reduce the technical and financial risk in performing the relativity experiment. A program is described that would generate engineering data to permit prediction of final performance. Two flight tests are recommended. The first flight would test a dewar smaller than that required for the final flight, but of size and form sufficient to allow extrapolation to the final design. The second flight would use the same dewar design to carry a set of three gyroscopes, which would be evaluated for spinup and drift characteristics for a period of a month or more. A proportional gas control system using boiloff helium gas from the dewar, and having the ability to prevent sloshing of liquid helium, would also be tested.

Patient Protection and Affordable Care Act; Exchange functions: standards for Navigators and non-Navigator assistance personnel; consumer assistance tools and programs of an Exchange and certified application counselors. Final rule.

PubMed

2013-07-17

This final rule addresses various requirements applicable to Navigators and non-Navigator assistance personnel in Federally-facilitated Exchanges, including State Partnership Exchanges, and to non-Navigator assistance personnel in State Exchanges that are funded through federal Exchange Establishment grants. It finalizes the requirement that Exchanges must have a certified application counselor program. It creates conflict-of-interest, training and certification, and meaningful access standards; clarifies that any licensing, certification, or other standards prescribed by a state or Exchange must not prevent application of the provisions of title I of the Affordable Care Act; adds entities with relationships to issuers of stop loss insurance to the list of entities that are ineligible to become Navigators; and clarifies that the same ineligibility criteria that apply to Navigators apply to certain non-Navigator assistance personnel. The final rule also directs that each Exchange designate organizations which will then certify their staff members and volunteers to be application counselors that assist consumers and facilitate enrollment in qualified health plans and insurance affordability programs, and provides standards for that designation.

Engineering Design Education Program for Graduate School

NASA Astrophysics Data System (ADS)

Ohbuchi, Yoshifumi; Iida, Haruhiko

The new educational methods of engineering design have attempted to improve mechanical engineering education for graduate students in a way of the collaboration in education of engineer and designer. The education program is based on the lecture and practical exercises concerning the product design, and has engineering themes and design process themes, i.e. project management, QFD, TRIZ, robust design (Taguchi method) , ergonomics, usability, marketing, conception etc. At final exercise, all students were able to design new product related to their own research theme by applying learned knowledge and techniques. By the method of engineering design education, we have confirmed that graduate students are able to experience technological and creative interest.

Design of a motor-generator for an energy storage flywheel

NASA Astrophysics Data System (ADS)

Niemeyer, W. Leland; Studer, Philip A.

1988-10-01

The paper examines motor/generator designs in which the rotor is integrated into the flywheel. Rotational loss considerations tend to dominate the design tradeoffs to maintain high system storage efficiency with a directly coupled unit. Some of the design alternatives are described as a guide to the experimental and analytical program needed to finalize a design.

10 CFR 50.34 - Contents of applications; technical information.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and a program to ensure that the results of these studies are factored into the final design of the... assessment study to determine the optimum automatic depressurization system (ADS) design modifications that... capability for containment purging/venting designed to minimize the purging time consistent with ALARA...

10 CFR 50.34 - Contents of applications; technical information.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., and a program to ensure that the results of these studies are factored into the final design of the... assessment study to determine the optimum automatic depressurization system (ADS) design modifications that... capability for containment purging/venting designed to minimize the purging time consistent with ALARA...

Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quarles, Stephen, L.; Sindelar, Melissa

2011-12-13

The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.

Minicars research safety vehicle program. Phase 3. Volume 1. Technical final report. Report for Jan 1977-Sep 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ausherman, V.K.; Khadikar, A.V.; Syson, S.R.

1981-09-01

The objective of the RSV Program was to provide research and test data applicable to the automobile safety performance requirements for the mid-1980s, and to evaluate the compatibility of these requirements with environmental policies, efficient energy utilization, and consumer economic considerations. The RSV Program has demonstrated that it is possible to make cars much safer than they are presently. It has produced automobile designs that are consistent, at affordable cost, with the national objectives for fuel economy and environmental protection. It has indicated, at least to a limited degree, that the technological findings are applicable, at varying levels, to amore » variety of car designs. And it has provided evidence that these findings can be wrapped in a package of considerable appeal to the public. This Final Report is a comprehensive compilation of the findings of the Phase III efforts of Minicars, Inc. It describes the design and testing of the RSV systems, and the performance levels achieved.« less

Conceptual design of advanced central receiver power systems sodium-cooled receiver concept. Volume 1. Executive summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

The conceptual design of an advanced central receiver power system using liquid sodium as a heat transport medium has been completed by a team consisting of the Energy Systems Group (prime contractor), McDonnell Douglas, Stearns-Roger, The University of Houston, and Salt River Project. The purpose of this study was to determine the technical and economic advantages of this concept for commercial-scale power plants. This final report covers all tasks of the project. These tasks were as follows: (1) review and analysis of preliminary specification; (2) parametric analysis; (3) select commercial configuration; (4) commercial plant conceptual design; (5) assessment of commercialmore » plant; (6) advanced central receiver power system development plan; (7) program plan; (8) reports and data; (9) program management; and (10) safety analysis. A programmatic overview of the accomplishments of this program is given. The 100-MW conceptual commercial plant, the 281-MW optimum plant, and the 10-MW pilot plant are described. (WHK)« less

75 FR 61253 - Final Fair Market Rents for Fiscal Year 2011 for the Housing Choice Voucher Program and Moderate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... local HUD program staff. Questions on how to conduct FMR surveys or further methodological explanations... version of the RDD survey methodology for smaller, nonmetropolitan PHAs. This methodology is designed to...

Impaired motorcycle operation, final report. Volume 1, Riders helping riders evaluation

DOT National Transportation Integrated Search

2008-08-01

Riders Helping Riders (RHR) is an instructional program designed to encourage motorcyclists to intervene to prevent drinking and riding by their motorcyclist peers. The program is based on focus group research which found that riders consider themsel...

Impaired motorcycle operation, final report. Volume 3, Riders helping riders student manual

DOT National Transportation Integrated Search

2007-08-22

Riders Helping Riders (RHR) is an instructional program designed to encourage motorcyclists to intervene to prevent drinking and riding by their motorcyclist peers. The program is based on focus group research which found that riders consider themsel...

Impaired motorcycle operation, final report. Volume 2, Riders helping riders instructor manual

DOT National Transportation Integrated Search

2007-08-22

Riders Helping Riders (RHR) is an instructional program designed to encourage motorcyclists to intervene to prevent drinking and riding by their motorcyclist peers. The program is based on focus group research which found that riders consider themsel...

WTO — a deterministic approach to 4-fermion physics

NASA Astrophysics Data System (ADS)

Passarino, Giampiero

1996-09-01

The program WTO, which is designed for computing cross sections and other relevant observables in the e+e- annihilation into four fermions, is described. The various quantities are computed over both a completely inclusive experimental set-up and a realistic one, i.e. with cuts on the final state energies, final state angles, scattering angles and final state invariant masses. Initial state QED corrections are included by means of the structure function approach while final state QCD corrections are applicable in their naive formulation. A gauge restoring mechanism is included according to the Fermion-Loop scheme. The program structure is highly modular and particular care has been devoted to computing efficiency and speed.

76 FR 17159 - Office of New Reactors; Final Interim Staff Guidance on Standard Review Plan, Section 17.4...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

... Interim Staff Guidance on Standard Review Plan, Section 17.4, ``Reliability Assurance Program'' AGENCY... design reliability assurance program (RAP). This ISG updates the guidance provided to the staff in Standard Review Plan (SRP), Section 17.4, ``Reliability Assurance Program,'' of NUREG-0800, ``Standard...

Parenting Education: An Exemplary Program for Rural/Migrant Youth and Adults. Final Report.

ERIC Educational Resources Information Center

Baum, Rosemere; And Others

Designed for use in a parenting education course for rural/migrant youth and adults, this parenting education learning kit consists of a coordinator's manual and bilingual instructional materials for seven course sessions. Issues addressed in the coordinator's manual include program content, program format, orientation for experienced parents,…

Final Technical Report on the Institute for Oral Language Programs for the Elementary School.

ERIC Educational Resources Information Center

Ince, Robert L.

This document is a complete evaluation of a National Defense Education Act (NDEA) University of Illinois Summer Institute for Advanced Study in Oral Language Programs for Elementary Schools. The institute was designed to help teachers understand and implement fully detailed programs for oral communication instruction in self-contained elementary…

Tech Prep Program in Financial Services. Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

A tech prep program in financial services, called Chicago Academy of Finance, was developed at Jones Metropolitan High School of Business and Commerce in Chicago, Illinois. The program was designed to integrate vocational and academic skills, with an emphasis on critical thinking skills. Of the 39 students initially enrolling in the first…

W.E.S.T. Pilot Project. Final Report.

ERIC Educational Resources Information Center

O'Gorman, Lori A. Stinson

The Saskatchewan Federation of Labor (SFL) conducted a Workers' Education for Skills Training, or WEST Program, to upgrade its membership's basic literacy skills. The purpose of the WEST Program was to develop, ensure access to, and build support for a workplace literacy program designed to meet the diverse needs of affiliates' members. Six…

The Volunteers in Partnership with Parents (VIPP) Final Performance and Evaluation Report.

ERIC Educational Resources Information Center

Nelson, Lynda A.

Over the 3 years of funding, 1983-1986, the Volunteers in Partnership with Parents Project (VIPP), a Handicapped Children's Early Education Program (HCEEP) Model Demonstration Program funded by the U.S. Department of Education, designed and implemented a program model for parents in rural North Carolina who had significantly handicapped preschool…

Rigorous Tests of Student Outcomes in CTE Programs of Study: Final Report

ERIC Educational Resources Information Center

Castellano, Marisa; Sundell, Kirsten E.; Overman, Laura T.; Richardson, George B.; Stone, James R., III

2014-01-01

This study was designed to investigate the relationship between participation in federally mandated college and career-preparatory programs--known as programs of study (POS)--and high school achievement outcomes. POS are an organized approach to college and career readiness that offer an aligned sequence of courses spanning secondary and…

Final Evaluation Report of the San Marcos Consolidated Independent School District's Bilingual Education Program, 1975-1976.

ERIC Educational Resources Information Center

Harrison, Helene W.

Comprised of 27 classrooms from grade levels 1-6, the program was primarily designed to provide bilingual education for pupils with limited English speaking ability. However, due to parental requests, almost 16% monolingual English-speakers were accepted into the program. Of the 717 pupils participating in the program 84.6% were Mexican American.…

Final Evaluation Report of the San Marcos Consolidated Independent School District's Bilingual Education Program, 1974-1975.

ERIC Educational Resources Information Center

Harrison, Helene W.

The program is primarily designed to provide bilingual education for pupils, in grades K-6, with limited English-speaking ability. Due to parental requests, approximately 16 percent monolingual English-speakers have been accepted into the program. Of the 529 children enrolled in the program, 89 percent have Spanish surnames. Objectives for the…

Evaluation Design 1978-1979: ESAA Title I Migrant Program. Publication Number 78.11.

ERIC Educational Resources Information Center

Friedman, Myron; And Others

To collect and disseminate information relevant to the accountability and program components of the Title I Migrant Program in the Austin school district and to report to the Texas Education Agency through interim and final reports on how well the migrant program is meeting its stated objectives for 1978-79 are the functions of the evaluation for…

Development of a Residential Education Program for Emotionally Deprived Pseudo-Retarded Blind Children, Volume I. Final Report.

ERIC Educational Resources Information Center

Rigby, Mary E.; Woodcock, Charles C.

To design a residential school program for multiply handicapped blind children and to develop identifying procedures for prospects for this type of program, 15 children (ages 5 to 13, legally blind, educationally retarded, multiply handicapped) of both sexes were enrolled in a 12 month program. The curriculum was based on a systematic presentation…

Impact Evaluation of the U.S. Department of Education's Student Mentoring Program. Final Report. NCEE 2009-4047

ERIC Educational Resources Information Center

Bernstein, Lawrence; Rappaport, Catherine Dun; Olsho, Lauren; Hunt, Dana; Levin, Marjorie

2009-01-01

This report summarizes the findings from a national evaluation of mentoring programs funded under the U.S. Department of Education's Student Mentoring Program. The impact evaluation used an experimental design in which students were randomly assigned to a treatment or control group. Thirty-two purposively selected School Mentoring Programs and…

Evaluation of Title I Program, Community School Distrlct 31, New York City. 1978-79 School Year. Final Report, E.D.L. Reading Lab.

ERIC Educational Resources Information Center

Knight, Michael E.

This program was designed to improve reading skills and to provide intensive remediation for students in grades six through nine. Specialized materials and equipment were provided by Educational Development Laboratories (EDL). The EDL Reading Laboratory utilized the Learning 100 program, a multi-modality developmental and remedial program. Small…

The Development and Validation of an Inservice Program for Vocational Teachers of the Disadvantaged. Final Report.

ERIC Educational Resources Information Center

Ehresman, Norman D.; And Others

The major objective of the research project was to develop and implement an inservice education program designed to improve teaching effectiveness of vocational teachers of disadvantaged students in vocational programs. In addition, the authors sought to determine the effects of the inservice program on teachers and their students and to develop a…

School Community Education Program in New York City, 1984-85. Volume IV: OEA Final Evaluation Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn. Office of Educational Assessment.

In 1984-85, the New York City Public Schools received $2,374,686 from the state legislature to operate the School Community Education Program (also known as the Umbrella Program). The program consisted of 46 different projects designed to provide innovative solutions to local educational and school problems. Thirteen of these projects are…

A Study of the National Upward Bound and Talent Search Programs. Final Report. Volume III: Descriptive Study of the Talent Search Program.

ERIC Educational Resources Information Center

Pyecha, J. N.; And Others

The Office of Education's Talent Search program is designed to: (a) identify needy youths with exceptional potential and encourage them to complete secondary school and undertake further education; (b) publicize student financial aid; and (c) encourage dropouts of demonstrated aptitude to reenter educational programs. The Talent Search program…

Making a Difference in the Lives of Infants and Toddlers and Their Families: The Impacts of Early Head Start. Volumes I-III: Final Technical Report [and] Appendixes [and] Local Contributions to Understanding the Programs and Their Impacts.

ERIC Educational Resources Information Center

Love, John M.; Kisker, Ellen Eliason; Ross, Christine M.; Schochet, Peter Z.; Brooks-Gunn, Jeanne; Paulsell, Diane; Boller, Kimberly; Constantine, Jill; Vogel, Cheri; Fuligni, Alison Sidle; Brady-Smith, Christy

Early Head Start was designed in 1994 as a 2-generation program to enhance children's development and health, strengthen family and community partnerships, and support the staff delivering new services to low-income families with pregnant women, infants, or toddlers. This document contains the final technical report, appendixes, and local…

48 CFR 2.101 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... research, planning, development, design, construction, alteration, or repair of real property; and (3..., evaluations, consultations, comprehensive planning, program management, conceptual designs, plans and... include the value and size of the modification and the comparative value and size of the final product...

48 CFR 2.101 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... research, planning, development, design, construction, alteration, or repair of real property; and (3..., evaluations, consultations, comprehensive planning, program management, conceptual designs, plans and... minor include the value and size of the modification and the comparative value and size of the final...

Computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems

NASA Astrophysics Data System (ADS)

Ku, Walter H.; Gang, Guan-Wan; He, J. Q.; Ichitsubo, I.

1988-05-01

This final technical report presents results on the computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems. New results include analytical and computer aided device models of GaAs MESFETs and HEMTs or MODFETs, new synthesis techniques for monolithic feedback and distributed amplifiers and a new nonlinear CAD program for MIMIC called CADNON. This program incorporates the new MESFET and HEMT model and has been successfully applied to the design of monolithic millimeter-wave mixers.

Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

NASA Technical Reports Server (NTRS)

1976-01-01

The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

Support services relating to geothermal programs. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-08-01

Activities designed to assist in the assessment of processes through which geopressured methane production and geopressure-geothermal power can be increased are discussed. Progress is reported on the following: general support, hot-dry-rock review, R and D plan, and the Edna Delcambre final report. (MHR)

Spacecraft rendezvous operational considerations affecting vehicle systems design and configuration

NASA Astrophysics Data System (ADS)

Prust, Ellen E.

One lesson learned from Orbiting Maneuvering Vehicle (OMV) program experience is that Design Reference Missions must include an appropriate balance of operations and performance inputs to effectively drive vehicle systems design and configuration. Rendezvous trajectory design is based on vehicle characteristics (e.g., mass, propellant tank size, and mission duration capability) and operational requirements, which have evolved through the Gemini, Apollo, and STS programs. Operational constraints affecting the rendezvous final approach are summarized. The two major objectives of operational rendezvous design are vehicle/crew safety and mission success. Operational requirements on the final approach which support these objectives include: tracking/targeting/communications; trajectory dispersion and navigation uncertainty handling; contingency protection; favorable sunlight conditions; acceptable relative state for proximity operations handover; and compliance with target vehicle constraints. A discussion of the ways each of these requirements may constrain the rendezvous trajectory follows. Although the constraints discussed apply to all rendezvous, the trajectory presented in 'Cargo Transfer Vehicle Preliminary Reference Definition' (MSFC, May 1991) was used as the basis for the comments below.

Phase I of the Near Term Hybrid Passenger Vehicle Development Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

The results of Phase I of the Near-Term Hybrid Vehicle Program are summarized. This phase of the program ws a study leading to the preliminary design of a 5-passenger hybrid vehicle utilizing two energy sources (electricity and gasoline/diesel fuel) to minimize petroleum usage on a fleet basis. This report presents the following: overall summary of the Phase I activity; summary of the individual tasks; summary of the hybrid vehicle design; summary of the alternative design options; summary of the computer simulations; summary of the economic analysis; summary of the maintenance and reliability considerations; summary of the design for crash safety;more » and bibliography.« less

Development of the 7.3 MW MOD-5A wind-turbine generator system

NASA Astrophysics Data System (ADS)

Barton, R. S.; Lucas, W. C.

1983-12-01

The General Electric Company Advanced Energy Programs Department is designing, under DOE/NASA sponsorship through Contract DEN 3-153, the MOD-5A wind-turbine system, which must generate electricity for less than 3.75 cents/kWh (1980 dollars). During the conceptual and preliminary design phases, the basic features were established as a result of tradeoff and optimization studies driven by minimizing the system cost of energy. During the past year, the program has been in the final design phase, and a reassessment to minimize risk has received strong emphasis in the design process. The program has progressed to the point that an agreement of sale has been reached for the first unit.

Final Guidance on Awards of Grants to Indian Tribes under Section 106 of the Clean Water Act

EPA Pesticide Factsheets

Guidance to help tribal water quality program managers, staff, and other tribal environmental decision makers design and implement effective and successful water quality programs. Also assists EPA Regions to award and administer tribal grants.

The WFIRST Interim Design Reference Mission: Capabilities, Constraints, and Open Questions

NASA Technical Reports Server (NTRS)

Kruk, Jeffrey W.

2012-01-01

The Project Office and Science Definition Team for the Wide-Field Infrared Survey Telescope (WFIRST) are in the midst of a pre-Phase A study to establish a Design Reference Mission (DRM). An Interim report was released in June 2011, with a final report due later in 2012. The predicted performance of the Interim DRM Observatory will be described, including optical quality, observing efficiency, and sensitivity for representative observing scenarios. Observing constraints and other limitations on performance will also be presented, with an emphasis on potential Guest Observer programs. Finally, a brief status update will be provided on open trade studies of interest to the scientific community. The final DRM may differ from the Interim DRM presented here. However, the underlying requirements of the scientific programs are not expected to change, hence the capabilities of the IDRM are likely to be maintained even if the implementation changes in significant ways.

The non-independence discussion about cycle structure in the computer language: the final simplification of computer language in the structural design

NASA Astrophysics Data System (ADS)

Yang, Peilu

2013-03-01

In the first place, the article discusses the theory, content, development, and questions about structured programming design. The further extension on this basement provides the cycle structure in computer language is the sequence structure, branch structure, and the cycle structure with independence. Through the deeply research by the writer, we find the non-independence and reach the final simplification about the computer language design. In the first, the writer provides the language structure of linear structure (I structure) and curvilinear structure (Y structure). This makes the computer language has high proficiency with simplification during the program exploration. The research in this article is corresponding with the widely used dualistic structure in the computer field. Moreover, it is greatly promote the evolution of computer language.

Roads to Success: Estimated Impacts of an Education and Career Planning Program during Middle School. Final Report

ERIC Educational Resources Information Center

Chaplin, Duncan; Bleeker, Martha; Booker, Kevin

2010-01-01

Roads to Success (RTS) is a school and career planning program designed to be implemented for 45 minutes per week in grades 7 through 12. Researchers at Mathematica Policy Research used a random assignment design to estimate the impacts of receiving RTS in grades 7 and 8. More than half of the students in these schools were eligible for free or…

Reliability and the design process at Honeywell Avionics Division

NASA Technical Reports Server (NTRS)

Bezat, A.

1981-01-01

The division's philosophy for designed-in reliability and a comparison of reliability programs for space, manned military aircraft, and commercial aircraft, are presented. Topics include: the reliability interface with design and production; the concept phase through final proposal; the design, development, test and evaluation phase; the production phase; and the commonality among space, military, and commercial avionics.

Standardization of Course Plan and Design of Objective Structured Field Examination (OSFE) for the Assessment of Pharm.D. Student’s Community Pharmacy Clerkship Skills

PubMed Central

Monajjemzadeh, Farnaz; Shokri, Javad; Mohajel Nayebi, Ali Reza; Nemati, Mahboob; Azarmi, Yadollah; Charkhpour, Mohammad; Najafi, Moslem

2014-01-01

Purpose: This study was aimed to design Objective Structured Field Examination (OSFE) and also standardize the course plan of community pharmacy clerkship at Pharmacy Faculty of Tabriz University of Medical Sciences (Iran). Methods: The study was composed of several stages including; evaluation of the old program, standardization and implementation of the new course plan, design and implementation of OSFE, and finally results evaluation. Results: Lack of a fair final assessment protocol and proper organized educating system in various fields of community pharmacy clerkship skills were assigned as the main weaknesses of the old program. Educational priorities were determined and student’s feedback was assessed to design the new curriculum consisting of sessions to fulfill a 60-hour training course. More than 70% of the students were satisfied and successfulness and efficiency of the new clerkship program was significantly greater than the old program (P<0.05). In addition, they believed that OSFE was a suitable testing method. Conclusion: The defined course plan was successfully improved different skills of the students and OSFE was concluded as a proper performance based assessment method. This is easily adoptable by pharmacy faculties to improve the educational outcomes of the clerkship course. PMID:24511477

Interactive program for analysis and design problems in advanced composites technology

NASA Technical Reports Server (NTRS)

Cruse, T. A.; Swedlow, J. L.

1971-01-01

During the past year an experimental program in the fracture of advanced fiber composites has been completed. The experimental program has given direction to additional experimental and theoretical work. A synthesis program for designing low weight multifastener joints in composites is proposed, based on extensive analytical background. A number of failed joints have been thoroughly analyzed to evaluate the failure hypothesis used in the synthesis procedure. Finally, a new solution is reported for isotropic and anisotropic laminates using the boundary-integral method. The solution method offers significant savings of computer core and time for important problems.

The Vocational Education Component of the Rhode Island Educational Management Information System.

ERIC Educational Resources Information Center

Galamaga, Donald P.; Bartolomeo, Paul A.

The document describes the implementation (Phase Two) of the Vocational Educational module--one component of an educational management information system. Phase Two entails the technical effort of final system design, final output specifications, edit specifications, system software selection, computer programing, systems documentation and the…

VI-G, Sec. 661, P.L. 91-230. Final Performance Report.

ERIC Educational Resources Information Center

1976

Presented is the final performance report of the CSDC model which is designed to provide services for learning disabled high school students. Sections cover the following program aspects: organizational structure, inservice sessions, identification of students, materials and equipment, evaluation of student performance, evaluation of the model,…

High/Scope Outreach Project. Final Report. October 1, 1983-September 30, 1984.

ERIC Educational Resources Information Center

High/Scope Educational Research Foundation, Ypsilanti, MI.

The final report reviews accomplishments of an outreach project designed to provide technical assistance and training to early childhood programs for handicapped children. The project features the Cognitively Oriented Preschool Curriculum, a developmental approach based on Piagetian theory and explained to build on the child's accomplishments. A…

PIFCGT: A PIF autopilot design program for general aviation aircraft

NASA Technical Reports Server (NTRS)

Broussard, J. R.

1983-01-01

This report documents the PIFCGT computer program. In FORTRAN, PIFCGT is a computer design aid for determing Proportional-Integral-Filter (PIF) control laws for aircraft autopilots implemented with a Command Generator Tracker (CGT). The program uses Linear-Quadratic-Regulator synthesis algorithms to determine feedback gains, and includes software to solve the feedforward matrix equation which is useful in determining the command generator tracker feedforward gains. The program accepts aerodynamic stability derivatives and computes the corresponding aerodynamic linear model. The nine autopilot modes that can be designed include four maneuver modes (ROLL SEL, PITCH SEL, HDG SEL, ALT SEL), four final approach models (APR GS, APR LOCI, APR LOCR, APR LOCP), and a BETA HOLD mode. The program has been compiled and executed on a CDC computer.

Defense Small Business Innovation Research Program (SBIR) Abstracts of Phase 2 Awards: Fiscal Year 1987 (ARMY)

DTIC Science & Technology

1987-01-01

Program, this report presents the abstracts of those proposals which have resulted in contract awards. Further, the name and address of each firm...CONDITIONS; AND, PRODUCE A FINAL REPORT AND A FINAL DESIGN PACKAGE THAT CAN BE USED IN THE PRODUCTION OF THE UNIT. BY THE END OF PHASE II THE ARMY CAN...NUMBER: DAAD07-87-C-107 ROGER W ANDERSON TITLE: AUTOMATED WEATHER FACTOR ANALYSIS AND DISPLAY TOPIC# 71 OFFICE: LABCOM/ASL IDENT#: 16015 SMALL BUSINESS

United States Air Force Summer Research Program - 1993 Summer Research Extension Program Final Reports, Volume 4A, Wright Laboratory

DTIC Science & Technology

1994-11-01

Erdman Solar to Thermal Energy Physics and Astronomy University of Iowa, Iowa City, IA PL/RK 6 A Detailed Investigation of Low-and High-Power Arcjet...Properties of Dr. Mary Potasek Strained Layer Sem Applied Physics Columbia University, New York, NY WL/ML 27 Development of Control Design Methodologies...concrete is also presented. Finally, the model is extended to include penetration into multiple layers of different target materials. Comparisons are

Design and demonstration of an advanced data collection/position location system

NASA Technical Reports Server (NTRS)

1977-01-01

The final report on a breadboard evaluation and demonstration program is reported concerning the applicability of MSK modulation and chirp-z transformer technology in Advanced Data Collection/Position Location (ADC/PL) systems. The program effort consisted of three phases - design, testing, and evaluation. Section 2 describes the breadboard hardware built during the design phase of the program, Section 3 describes the tests conducted on the breadboard and the results of the tests, and Section 4 presents a brief analysis and summary of the findings of the breadboard tests and develops a sample ADC/PL system which incorporates both MSK modulation and a chirp-z transformer.

Longitudinal Results of the Ypsilanti Perry Preschool Project. Final Report. Volume II of 2 Volumes.

ERIC Educational Resources Information Center

Weikart, David P.; And Others

The Ypsilanti Perry Preschool Project was an experiment to assess the longitudinal effects of a 2-year preschool program designed to compensate for functional mental retardation found in some children from disadvantaged families. The program consisted of a daily cognitively oriented preschool program and home visits each week to involve mothers in…

The Three-Year (1995-1997) Workplace Literacy Program at Chinatown Manpower Project, Inc. Final Evaluation.

ERIC Educational Resources Information Center

Friedenberg, Joan E.

An external evaluation was conducted of the Workplace Literacy Program at Chinatown Manpower Project, Inc., which provided oral and written job-specific instruction in English as a second language to Chinese garment workers. The program was designed for underemployed garment industry workers with low English proficiency, including seamstresses,…

Final Evaluation for "The Forgotten Southside", Harlandale Independent School District's Bilingual Education Program, 1975-1976.

ERIC Educational Resources Information Center

Harrison, Helene W.

Comprised of 60 pre-K-6 classrooms, the program was designed to provide bilingual education for pupils who have limited English speaking ability. Program objectives were to: prevent their educational retardation by instructing them in Spanish while developing their command of English; enhance their understanding and cognitive development in both…

Postdoctoral Fellowship Program in Educational Research, 1969-70. Final Report.

ERIC Educational Resources Information Center

Linn, Robert L.

This report gives a general outline of the postdoctoral fellowship program offered by the Educational Testing Service (ETS) and describes the specific program designed for Dr. William Wiersma, director of the Center for Educational Research and Services at the University of Toledo, who was the only fellow during 1969-70. In addition to attendance…

Native Language Reading Approach Program, 1982-1983. O.E.E. Final Evaluation Report.

ERIC Educational Resources Information Center

Keyes, Jose Luis; And Others

The Native Language Reading Approach Program in New York City was designed as an exemplary approach to on-site training of classroom teachers and their assistants in how to help students transfer reading skills from their native language to English. Program components included support services, teacher training, material/curriculum development,…

Evaluation of the Fourth and Final Year of the Even Start--Padres y Progreso Program.

ERIC Educational Resources Information Center

Stevens, Carla J.; And Others

The Even Start--Padres y Progreso program was a nationally funded program in Houston (Texas) designed to prepare young children to enter school not only by offering early childhood education, but also assisting their families with adult literacy/English as a second language, parenting skills training, and employment skills training. The program…

Fort Berthold Library Literacy Program. Final Performance Report, October 1, 1988-September 30, 1989.

ERIC Educational Resources Information Center

Fort Berthold Reservation Public Library, New Town, ND.

The report describes activities of the Fort Berthold Reservation Public Library (North Dakota) Literacy Program to meet six objectives for the 1988-89 project year. The program was designed specifically to promote literacy among three Native American tribes, the Mandan, Hidatsa, and Arikara. Objectives included acquisition of a library literacy…

The TACT-Mentor Program: A Dual Introduction into College Teaching. Final Report.

ERIC Educational Resources Information Center

Murray, Robert C.

A two-part effort called "The TACT Mentor Program: A Dual Introduction into College Teaching," designed to assist new faculty in their first year of teaching at Heidelberg College, Ohio, is described and evaluated. The first part of the program, TACT (Teachers and College Teaching) consisted of weekly discussions based on the book…

Evaluation of an Organizational Development Program for Social Service Agencies. Final Report 77-2.

ERIC Educational Resources Information Center

Olmstead, Joseph A.

This report describes and evaluates an agency development program designed to aid administrators and supervisors of local social services to achieve effective agency performance. The program was conducted for a period of one year within four local agencies; two additional agencies were used as control groups. Assistance was provided through…

Study of the Career Intern Program. Final Technical Report--Task C: Program Dynamics: Structure, Function, and Interrelationships.

ERIC Educational Resources Information Center

Fetterman, David M.

A study identified causal linkages and basic interrelationships among components of the Career Intern Program (CIP) and observed outcomes. (The CIP is an alternative high school designed to enable disadvantaged and alienated dropouts or potential dropouts to earn regular high school diplomas, to prepare them for meaningful employment or…

Observational Study of Early Childhood Programs. Final Report. Volume I: Life in Preschool.

ERIC Educational Resources Information Center

Layzer, Jean I.; And Others

This study of 119 preschool programs in 5 states was designed to describe the classroom experiences of economically or educationally disadvantaged 4-year-old children and to examine linkages between characteristics of early childhood programs and the activities of the children and teachers in the classroom. Chapters 1 and 2 describe the context…

Telescience Testbed Pilot Program

NASA Technical Reports Server (NTRS)

Gallagher, Maria L. (Editor); Leiner, Barry M. (Editor)

1988-01-01

The Telescience Testbed Pilot Program is developing initial recommendations for requirements and design approaches for the information systems of the Space Station era. During this quarter, drafting of the final reports of the various participants was initiated. Several drafts are included in this report as the University technical reports.

Related Skills in the Marketplace. Final Report.

ERIC Educational Resources Information Center

John C. Calhoun State Community Coll., Decatur, AL.

A study identified related skills needed in five diploma programs offered in the Technical Division of John C. Calhoun State Community College in Decatur, Alabama. The programs were automotive technology, refrigeration/air conditioning, electrical technology, design drafting technology, and cosmetology. Thirty-five area businesses and industries…

Evaluation Strategies for EWP Programs: A Marketing Perspective.

ERIC Educational Resources Information Center

Turkewych, Christine

1986-01-01

Describes how evaluation strategies can be implemented to increase the effectiveness of English in the Work Place programs. Discusses the design and implementation of the strategy, how to analyze its results and produce a final report, and ways to get the results used. (SED)

ETHOS: Education Through Organ Study. Final Report.

ERIC Educational Resources Information Center

Wohl, Seth F.

This document describes the Education Through Organ Study Program (ETHOS) designed to counteract disaffected students' falling academic achievement, absenteeism and truancy, and negative attitudes toward education and the school. The program attempted to assure success in acquiring musical skill by providing portable desk reed organs, programmed…

NASA/ASEE Summer Faculty Fellowship Program: 1988 research reports

NASA Technical Reports Server (NTRS)

Anderson, Loren A. (Editor); Armstrong, Dennis W. (Editor)

1988-01-01

This contractor's report contains all sixteen final reports prepared by the participants in the 1988 Summer Faculty Fellowship Program. Reports describe research projects on a number of topics including controlled environments, robotics, cryogenic propellant storage, polymers, hydroponic culture, adaptive servocontrol, and computer aided design

Demonstration of fuel resistant to pellet-cladding interaction. Phase I. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenbaum, H.S.

1979-03-01

This program has as its ultimate objective the demonstration of an advanced fuel design that is resistant to the failure mechanism known as fuel pellet-cladding interaction (PCI). Two fuel concepts are being developed for possible demonstration within this program: (a) Cu-barrier fuel, and (b) Zr-liner fuel. These advanced fuels (known collectively as barrier fuels) have special fuel cladding designed to protect the Zircaloy cladding tube from the harmful effects of localized stress, and reactive fission products during reactor service. This is the final report for PHASE 1 of this program. Support tests have shown that the barrier fuel resists PCImore » far better than does the conventional Zircaloy-clad fuel. Power ramp tests thus far have shown good PCI resistance for Cu-barrier fuel at burnup > 12 MWd/kg-U and for Zr-liner fuel > 16 MWd/kg-U. The program calls for continued testing to still higher burnup levels in PHASE 2.« less

Apollo LM guidance computer software for the final lunar descent.

NASA Technical Reports Server (NTRS)

Eyles, D.

1973-01-01

In all manned lunar landings to date, the lunar module Commander has taken partial manual control of the spacecraft during the final stage of the descent, below roughly 500 ft altitude. This report describes programs developed at the Charles Stark Draper Laboratory, MIT, for use in the LM's guidance computer during the final descent. At this time computational demands on the on-board computer are at a maximum, and particularly close interaction with the crew is necessary. The emphasis is on the design of the computer software rather than on justification of the particular guidance algorithms employed. After the computer and the mission have been introduced, the current configuration of the final landing programs and an advanced version developed experimentally by the author are described.

Leadership Development Program Final Project

NASA Technical Reports Server (NTRS)

Parrish, Teresa C.

2016-01-01

TOSC is NASA's prime contractor tasked to successfully assemble, test, and launch the EM1 spacecraft. TOSC success is highly dependent on design products from the other NASA Programs manufacturing and delivering the flight hardware; Space Launch System(SLS) and Multi-Purpose Crew Vehicle(MPCV). Design products directly feed into TOSC's: Procedures, Personnel training, Hardware assembly, Software development, Integrated vehicle test and checkout, Launch. TOSC senior management recognized a significant schedule risk as these products are still being developed by the other two (2) programs; SVE and ACE positions were created.

The NASA Hyper-X Program

NASA Technical Reports Server (NTRS)

Freeman, Delman C., Jr.; Reubush, Daivd E.; McClinton, Charles R.; Rausch, Vincent L.; Crawford, J. Larry

1997-01-01

This paper provides an overview of NASA's Hyper-X Program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an overview of the flight test program, research objectives, approach, schedule and status. Substantial experimental database and concept validation have been completed. The program is currently concentrating on the first, Mach 7, vehicle development, verification and validation in preparation for wind-tunnel testing in 1998 and flight testing in 1999. Parallel to this effort the Mach 5 and 10 vehicle designs are being finalized. Detailed analytical and experimental evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a database for validation of design methods once flight test data are available.

Development history of the Hybrid Test Vehicle

NASA Technical Reports Server (NTRS)

Trummel, M. C.; Burke, A. F.

1983-01-01

Phase I of a joint Department of Energy/Jet Propulsion Laboratory Program undertook the development of the Hybrid Test Vehicle (HTV), which has subsequently progressed through design, fabrication, and testing and evaluation phases. Attention is presently given to the design and test experience gained during the HTV development program, and a discussion is presented of the design features and performance capabilities of the various 'mule' vehicles, devoted to the separate development of engine microprocessor control, vehicle structure, and mechanical components, whose elements were incorporated into the final HTV design. Computer projections of the HTV's performance are given.

A design procedure and handling quality criteria for lateral directional flight control systems

NASA Technical Reports Server (NTRS)

Stein, G.; Henke, A. H.

1972-01-01

A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.

1982-03-01

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform themore » needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume contains appendixes on pump design, cavitation damage, performance testing, hydraulics, two-phase flow in pumps, flow stability, and rotor dynamics.« less

World Trade Center Health Program; Amendments to Definitions, Appeals, and Other Requirements. Final rule.

PubMed

2016-12-15

In 2011 and 2012, the Secretary, Department of Health and Human Services (HHS), promulgated regulations designed to govern the World Trade Center (WTC) Health Program (Program), including the processes by which eligible responders and survivors may apply for enrollment in the Program, obtain health monitoring and treatment for WTC-related health conditions, and appeal enrollment and treatment decisions, as well as a process to add new conditions to the List of WTC-Related Health Conditions (List). After using the regulations for a number of years, the Administrator of the WTC Health Program identified potential improvements to certain existing provisions, including, but not limited to, appeals of enrollment, certification, and treatment decisions, as well as the procedures for the addition of health conditions for WTC Health Program coverage. He also identified the need to add new regulatory provisions, including, but not limited to, standards for the disenrollment of a WTC Health Program member and decertification of a certified WTC-related health condition. A notice of proposed rulemaking was published on August 17, 2016; this action addresses public comments received on that proposed rulemaking, as well as three interim final rules promulgated since 2011, and finalizes the proposed rule and three interim final rules.

Quiet Clean Short-Haul Experimental Engine (QCSEE) Under-the-Wing (UTW) Final Design Report

NASA Technical Reports Server (NTRS)

1977-01-01

The QCSEE Program provides for the design, fabrication, and testing of two experimental high-bypass geared turbofan engines and propulsion systems for short-haul passenger aircraft. The overall objective of the program is to develop the propulsion technology required for future externally blown flap types of aircraft with engines located both under-the-wing and over-the-wing. This technology includes work in composite structures and digital engine controls.

Spacecraft design project: Low Earth orbit communications satellite

NASA Technical Reports Server (NTRS)

Moroney, Dave; Lashbrook, Dave; Mckibben, Barry; Gardener, Nigel; Rivers, Thane; Nottingham, Greg; Golden, Bill; Barfield, Bill; Bruening, Joe; Wood, Dave

1991-01-01

This is the final product of the spacecraft design project completed to fulfill the academic requirements of the Spacecraft Design and Integration 2 course (AE-4871) taught at the U.S. Naval Postgraduate School. The Spacecraft Design and Integration 2 course is intended to provide students detailed design experience in selection and design of both satellite system and subsystem components, and their location and integration into a final spacecraft configuration. The design team pursued a design to support a Low Earth Orbiting (LEO) communications system (GLOBALSTAR) currently under development by the Loral Cellular Systems Corporation. Each of the 14 team members was assigned both primary and secondary duties in program management or system design. Hardware selection, spacecraft component design, analysis, and integration were accomplished within the constraints imposed by the 11 week academic schedule and the available design facilities.

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 2. Appendix A: Design study for a SLEEC actuation system

NASA Technical Reports Server (NTRS)

Thompson, D. S.

1986-01-01

The results are presented of a design feasibility study of a self-contained (powered) actuation system for a Shingle Lap Extendible Exit Cone (SLEEC) for Transportation System (STS). The evolution of the SLEEC actuation system design is reviewed, the final design concept is summarized, and the results of the detailed study of the final concept of the actuation system are treated. A conservative design using proven mechanical components was established as a major program priority. The final mechanical design has a very low development risk since the components, which consist of ballscrews, gearing, flexible shaft drives, and aircraft cables, have extensive aerospace applications and a history of proven reliability. The mathematical model studies have shown that little or no power is required to deploy the SLEEC actuation system because acceleration forces and internal pressure from the rocket plume provide the required energies. A speed control brake is incorporated in the design in order to control the rate of deployment.

75 FR 28287 - Final Plan for Fiscal Year 2010

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... Federal agencies. In keeping with OJJDP's mission, these programs are designed to help strengthen the.../intervention based on sound theory and evaluative literature, which has yet to be evaluated rigorously. OJJDP..., and research and evaluation projects designed to improve juvenile justice systems and delinquency...

Traffic load spectra for implementing and using the mechanistic-empirical pavement design guide in Georgia.

DOT National Transportation Integrated Search

2014-02-01

The GDOT is preparing for implementation of the Mechanistic-Empirical Pavement Design : Guide (MEPDG). As part of this preparation, a statewide traffic load spectra program is being : developed for gathering truck axle loading data. This final report...

The UIC Therapeutic Partnership Project. Final Report.

ERIC Educational Resources Information Center

Lawlor, Mary C.; Cada, Elizabeth A.

This interdisciplinary inservice training project at the University of Illinois at Chicago was designed to improve early childhood occupational and physical therapy services by developing, implementing, evaluating, and disseminating a comprehensive training model. The competency-based program was designed to address the developmental needs of…

Ecological Risk Assessment Guidance for Superfund: Process for Designing and Conducting Ecological Risk Assessments - Interim Final

EPA Pesticide Factsheets

This document provides guidance to site managers and Remedial Project Managers who are legally responsible for the management of a site on how to design and conduct technically defensible ecological risk assessments for the Superfund program.

Development of Emergency Intravehicular Spacesuit (EIS) assembly

NASA Technical Reports Server (NTRS)

1973-01-01

A program was undertaken to develop and test two prototype pressure suits to operate at pressures up to 413 mm Hg (8.0 PSIG). The units were designated Emergency Intravehicular Spacesuits (EIS). Performance requirements, design evolution, testing performed, problems encountered, and final EIS configuration are reported.

Project Target: Criterion-Referenced Physical Fitness Standards for Adolescents with Disabilities. Final Report.

ERIC Educational Resources Information Center

Winnick, Joseph P.; Short, Francis X.

This final report discusses the outcomes of a project designed to extend the nation's current emphasis on health-related, criterion-referenced fitness testing and programming to children and adolescents with disabilities. It summarizes project activities leading up to the Brockport Physical Fitness Test and related measures. Activities included:…

Preservation Planning Project Study Team. Final Report.

ERIC Educational Resources Information Center

Pittsburgh Univ., PA. Libraries.

This final report is a product of a comprehensive 14-month Preservation Planning Program (PPP) self-study conducted by the University of Pittsburgh Libraries, working with the Association of Research Libraries' (ARL) Office of Management Studies. The PPP is designed to put self-help tools into the hands of library staff responsible for developing…

Demonstration of the Competency-Based Curriculum for Distributive Education and Distributive Cooperative Training Programs. Final Report.

ERIC Educational Resources Information Center

Marshall Univ., Huntington, WV. Dept. of Occupational, Adult, and Safety Education.

A core curriculum, training plans, and implementation guide developed by the project are included in this final report, which describes activities to resolve problems encountered by teachers using the IDECC (Interstate Distributive Education Curriculum Consortium) system designed for distributive education (DE) and diversified cooperative training…

Project CREATE Final Report. Cooperative Resources To Enhance Access to Technology Education.

ERIC Educational Resources Information Center

Hampden County Employment and Training Consortium, Springfield, MA.

These materials have been developed by Project CREATE (Cooperative Resources to Enhance Access to Jobs through Technical Education), a demonstration program designed to develop a network, specific activities, and resources that would provide education and support services to a wide audience. A 13-page final report describes the hands-on training…

Final Evaluation Report of the Harlandale Independent School District's Bilingual Education Program, 1974-75.

ERIC Educational Resources Information Center

Harrison, Helene W.

Comprised of pre-K-6 and LLD (Language Learning Disability) classrooms, the program is designed to provide bilingual education for pupils who have limited English speaking ability. There are 1,612 pupils from 7 elementary schools and 1 junior high school. Program objectives are to: (1) prevent their educational retardation by instructing them in…

George W. Wingate High School Bilingual Program ESEA Title VII Final Evaluation Report, 1979-1980.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Educational Evaluation.

This is an evaluation report of the fifth year of a bilingual career education program, funded under Title VII and carried out at George W. Wingate High School, Brooklyn, New York. The program was designed to offer bilingual instruction and supportive services to the school's Haitian population, with the aim of preparing these students to…

Multimedia Approach to Self-Paced Individualized Instruction in Air Conditioning, Refrigeration and Heating and Other Vocational Programs. Final Report.

ERIC Educational Resources Information Center

Oil Belt Vocational Technical School, El Dorado, AR.

A multimedia, self-paced, individualized instructional program was designed to meet the needs of students in air conditioning, refrigeration, and heating programs at Oil Belt Vocational Technical School (Arkansas). The multimedia approach provided for video-based presentations to meet the needs for visual contact with the classroom and for…

A Comprehensive Vocational Education Program for Career Development in Leon County. Final Report. Volume 1. Program Performance Report.

ERIC Educational Resources Information Center

Leon County Schools, Tallahassee, FL.

The document presents an account of project activities that evolved around the development and implementation of career education in Leon County School District, Florida. The purpose of the project was to begin effecting needed educational changes at the K-14 level by developing a comprehensive career education program designed to increase student…

A Residential School's Outdoor Education Program for Emotionally Handicapped Adolescents. Final Project Report of the Rhinecliff Union Free School District, Holy Cross Campus.

ERIC Educational Resources Information Center

Rigothi, Anthony, Ed.

Concept definition and activity description constituted the major focus of implementation proceedings of this outdoor education program designed for a residential school serving secondary students with emotional and drug related problems. Major program objectives were the development of greater academic growth and more positive self-concept for…

Development and Field Test of Competency Based Instructional Material for a Career Mobility Program for Licensed Practical Nurses. Final Report.

ERIC Educational Resources Information Center

Bergen Community Coll., Paramus, NJ.

The Associate Degree Nursing Program at Bergen Community College developed and field tested competency-based instructional modules in a program designed to allow licensed practical nurses to qualify to take the certification examination for registered nurses after a year of study. Thirteen licensed practical nurses were enrolled in the first class…

Design and Implementation of a Distributed Version of the NASA Engine Performance Program

NASA Technical Reports Server (NTRS)

Cours, Jeffrey T.

1994-01-01

Distributed NEPP is a new version of the NASA Engine Performance Program that runs in parallel on a collection of Unix workstations connected through a network. The program is fault-tolerant, efficient, and shows significant speed-up in a multi-user, heterogeneous environment. This report describes the issues involved in designing distributed NEPP, the algorithms the program uses, and the performance distributed NEPP achieves. It develops an analytical model to predict and measure the performance of the simple distribution, multiple distribution, and fault-tolerant distribution algorithms that distributed NEPP incorporates. Finally, the appendices explain how to use distributed NEPP and document the organization of the program's source code.

The Selection of Students for Orthotic-Prosthetic Educational Programs. Final Report.

ERIC Educational Resources Information Center

Pedersen, E. Eugene; Vash, Carolyn L.

The study was designed to develop and validate a set of measures that might be useful in predicting "success" in orthotic and prosthetic educational programs. Two hundred and eleven entering students from four institutions were administered the screening battery. The institutions were: Cerritos College, New York University, Northwestern…

Developmental Reading at Livingston College, 1974-1976. A Final Report.

ERIC Educational Resources Information Center

Kussat, Reinhart; Farrow, Earl V.

A developmental reading program with a unified approach to the teaching of developmental reading to nontraditional freshmen was designed and initiated at Livingston College, Rutgers University. The two-level program, consisting of curriculum modules based on behavioral objectives and performance criteria, was required for all freshmen who ranked…

ABC's of Construction. Final Report.

ERIC Educational Resources Information Center

Greater Baton Rouge Chamber of Commerce, LA.

The ABC's of Construction project was a demonstration project designed to integrate basic skills training with an industry-developed vocational-craft training program. The program was located at the central training facility of the Pelican Chapter of Associated Builders and Contractors (ABC), an organization made up of nearly 300 member companies…

Postdoctoral Fellowship Program in Educational Research. Final Technical Report.

ERIC Educational Resources Information Center

Morgan, William P.

During his postdoctoral fellowship year, Dr. Morgan took formal course work in computer programing, advanced research design, projective techniques, the physiology of aging, and hypnosis. He also attended weekly seminars in the Institute of Environmental Stress and conducted an investigation entitled "The Alteration of Perceptual and Metabolic…

Instruction Using Experiments in a Computer. Final Report.

ERIC Educational Resources Information Center

Fulton, John P.; Hazeltine, Barrett

Included are four computer programs which simulate experiments suitable for freshman engineering and physics courses. The subjects of the programs are ballistic trajectories, variable mass systems, trajectory of a particle under various forces, and design of an electronic emplifier. The report includes the problem statement, its objectives, the…

Saving Schoolhouse Energy. Final Report.

ERIC Educational Resources Information Center

Rudy, John; And Others

The objective of the Saving Schoolhouse Energy Program was to generate information that school administrators and federal energy/education decision makers could use to identify ways of implementing specific, economical remedies to reduce energy waste in schools. This program was designed to have five phases: (1) Conduct an energy audit of ten…

Auctioneering Training Certificate Program 93-1001. Final Report.

ERIC Educational Resources Information Center

Clark, Charles H.

A project was conducted to prepare a catalog of duties and tasks, performance objectives and guides, and instructional materials that would enable schools to develop instructional programs designed to prepare persons to enter the career of auctioneering. An occupational survey of auctioneers was conducted; a writing team of auctioneers prepared…

13 CFR 120.845 - Premier Certified Lenders Program (PCLP).

Code of Federal Regulations, 2012 CFR

2012-01-01

... Certified Lenders Program (PCLP). (a) General. Under the PCLP, SBA designates qualified CDCs as PCLP CDCs... also may give PCLP CDCs increased authority to litigate 504 loans. (b) Application. A CDC must apply... Delegations of Authority for final determination. (c) Eligibility. In order for a CDC to be eligible to...

13 CFR 120.845 - Premier Certified Lenders Program (PCLP).

Code of Federal Regulations, 2011 CFR

2011-01-01

... Certified Lenders Program (PCLP). (a) General. Under the PCLP, SBA designates qualified CDCs as PCLP CDCs... also may give PCLP CDCs increased authority to litigate 504 loans. (b) Application. A CDC must apply... Delegations of Authority for final determination. (c) Eligibility. In order for a CDC to be eligible to...

13 CFR 120.845 - Premier Certified Lenders Program (PCLP).

Code of Federal Regulations, 2013 CFR

2013-01-01

... Certified Lenders Program (PCLP). (a) General. Under the PCLP, SBA designates qualified CDCs as PCLP CDCs... also may give PCLP CDCs increased authority to litigate 504 loans. (b) Application. A CDC must apply... Delegations of Authority for final determination. (c) Eligibility. In order for a CDC to be eligible to...

13 CFR 120.845 - Premier Certified Lenders Program (PCLP).

Code of Federal Regulations, 2010 CFR

2010-01-01

... Certified Lenders Program (PCLP). (a) General. Under the PCLP, SBA designates qualified CDCs as PCLP CDCs... also may give PCLP CDCs increased authority to litigate 504 loans. (b) Application. A CDC must apply... Delegations of Authority for final determination. (c) Eligibility. In order for a CDC to be eligible to...

13 CFR 120.845 - Premier Certified Lenders Program (PCLP).

Code of Federal Regulations, 2014 CFR

2014-01-01

... Certified Lenders Program (PCLP). (a) General. Under the PCLP, SBA designates qualified CDCs as PCLP CDCs... also may give PCLP CDCs increased authority to litigate 504 loans. (b) Application. A CDC must apply... Delegations of Authority for final determination. (c) Eligibility. In order for a CDC to be eligible to...

Cargo Movement Operations System (CMOS). Review of System/Segment Design Document (Final)

DTIC Science & Technology

1989-12-14

ERCI ACCEPTS*COMMENT: YES E I NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED C I ORIGINATOR CONTROL NUMBER: SSDD-0004 PROGRAM OFFICE CONTROL...ACCEPTS COMMENT: YES [ 3 NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN C 3 CLOSED C ] ORIGINATOR CONTROL NUMBER: SSDD-0005 PROGRAM OFFICE CONTROL

A Javits Project: Gifted Education Policy Studies Program. Final Report.

ERIC Educational Resources Information Center

Gallagher, James; Coleman, Mary Ruth

The Gifted Education Policy Studies Program was designed to address two issues: the status of state and local policies on the identification of gifted students from special populations (culturally diverse, children with disabilities, and economically disadvantaged); and the impact of educational reform movements (cooperative learning and middle…

Hyper-X: Flight Validation of Hypersonic Airbreathing Technology

NASA Technical Reports Server (NTRS)

Rausch, Vincent L.; McClinton, Charles R.; Crawford, J. Larry

1997-01-01

This paper provides an overview of NASA's focused hypersonic technology program, i.e. the Hyper-X program. This program is designed to move hypersonic, air breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. This paper presents some history leading to the flight test program, research objectives, approach, schedule and status. Substantial experimental data base and concept validation have been completed. The program is concentrating on Mach 7 vehicle development, verification and validation in preparation for wind tunnel testing in 1998 and flight testing in 1999. It is also concentrating on finalization of the Mach 5 and 10 vehicle designs. Detailed evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a data base for validation of design methods once flight test data are available.

77 FR 76831 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnaces and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... methodological changes designed to increase accuracy while reducing testing burden. This final rule also... Act), Public Law 94-163 (42 U.S.C. 6291-6309, as codified) sets forth a variety of provisions designed... procedures prescribed or amended under this section shall be reasonably designed to produce test results...

Solid state, S-band, power amplifier

NASA Technical Reports Server (NTRS)

Digrindakis, M.

1973-01-01

The final design and specifications for a solid state, S-band, power amplifier is reported. Modifications from a previously proposed design were incorporated to improve efficiency and meet input overdrive and noise floor requirements. Reports on the system design, driver amplifier, power amplifier, and voltage and current limiter are included along with a discussion of the testing program.

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Final ACT configuration evaluation

NASA Technical Reports Server (NTRS)

1982-01-01

The Final ACT Configuration Evaluation Task of the Integrated Application of Active Controls (IAAC) technology project within the energy efficient transport program is summarized. The Final ACT Configuration, through application of Active Controls Technology (ACT) in combination with increased wing span, exhibits significant performance improvements over the conventional baseline configuration. At the design range for these configurations, 3590 km, the block fuel used is 10% less for the Final ACT Configuration, with significant reductions in fuel usage at all operational ranges. Results of this improved fuel usage and additional system and airframe costs and the complexity required to achieve it were analyzed to determine its economic effects. For a 926 km mission, the incremental return on investment is nearly 25% at 1980 fuel prices. For longer range missions or increased fuel prices, the return is greater. The technical risks encountered in the Final ACT Configuration design and the research and development effort required to reduce these risks to levels acceptable for commercial airplane design are identified.

JT9D ceramic outer air seal system refinement program

NASA Technical Reports Server (NTRS)

Gaffin, W. O.

1982-01-01

The abradability and durability characteristics of the plasma sprayed system were improved by refinement and optimization of the plasma spray process and the metal substrate design. The acceptability of the final seal system for engine testing was demonstrated by an extensive rig test program which included thermal shock tolerance, thermal gradient, thermal cycle, erosion, and abradability tests. An interim seal system design was also subjected to 2500 endurance test cycles in a JT9D-7 engine.

MIST final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gloudemans, J.R.

1991-08-01

The multiloop integral system test (MIST) was part of a multiphase program started in 1983 to address small-break loss-of-coolant accidents (SBLOCAs) specific to Babcock Wilcox-designed plants. MIST was sponsored by the US Nuclear Regulatory Commission, the Babcock Wilcox Owners Group, the Electric Power Research Institute, and Babcock Wilcox. The unique features of the Babcock Wilcox design, specifically the hot leg U-bends and steam generators, prevented the use of existing integral system data or existing integral system facilities to addresss the thermal-hydraulic SBLOCA questions. MIST was specifically designed and constructed for this program, and an existing facility -- the once-through integralmore » system (OTIS) -- was also used. Data from MIST and OTIS are used to benchmark the adequacy of system codes, such as RELAP5 and TRAC, for predicting abnormal plant transients. The MIST program is reported in eleven volumes; Volumes 2 through 8 pertain to groups of Phase 3 tests by type, Volume 9 presents inter-group comparisons. Volume 10 provides comparisons between the RELAP5 MOD2 calculations and MIST observations, and Volume 11 (with addendum) presents the later, Phase 4 tests. This is Volume 1 of the MIST final report, a summary of the entire MIST program. Major topics include: test advisory grop (TAG) issues; facility scaling and design; test matrix; observations; comparisons of RELAP5 calculations to MIST observations; and MIST versus the TAG issues. 11 refs., 29 figs., 9 tabs.« less

Mobilizable RDF/d-RDF burning program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niemann, K.; Campbell, J.

1982-03-01

The Mobilizable RDF/d-RDF Burning Program was conceived to promote the utilization of refuse-derived fuels (RDF) as a supplement to existing fossil fuel sources in industrial-sized boilers. The program explores the design, development, and eventual construction of densified-RDF (d-RDF) for use in boiler combustion testing as a supplement to stoker coal or wood wastes. The equipment would be mounted on trailers and assembled and operated at preselected sites throughout the country where approximately 750 tons of RDF would be produced and test burned in a local boiler. The equipment, to include a transportable RDF boiler metering and feed system, would thenmore » be moved and operated at two to three test sites annually. The program is intended to encourage the construction of permanent resource recovery facilities by involving local waste handling groups in operating the equipment and producing fuel, and potential local fuel users in testing the fuel in their boilers. The Mobilizable Program was developed from two separate tasks. The first task developed the concept behind the program and defined its operational and organizational structure. The second task, a follow-up to the first, was intended principally to finalize test locations, develop equipment designs and specifications, and formalize a management program. This report summarizes the principal findings of both tasks. It identifies the criteria used to identify test locations, outlines the program's management structure, presents design and performance specifications for both the fuel production equipment and boiler fuel feed systems, and provides a detailed evaluation of the parameters involved in burning RDF in industrial-sized boilers. Final conclusions and recommendations identify problem areas encountered in the program, and discuss possible future directions for such a program.« less

Final Report of the Evaluation of the Summer Program for Mentally Retarded Young Adults--Occupational Training Centers. Summer 1970. ESEA Title I.

ERIC Educational Resources Information Center

Nalven, Fredric; Oliver, Adela

The 1970 Summer Program for Mentally Retarded Young Adults Occupational Training Centers program, funded under Title I of the 1965 Elementary Secondary Education Act, was designed to serve the summer educational, prevocational, and social needs of approximately 170 retarded adolescents and young adults. The general objectives of the project were…

A Youth Reentry Specialist Program for Released Incarcerated Youth with Handicapping Conditions. First Annual Report, September 1, 1985-August 31, 1986. Final Report.

ERIC Educational Resources Information Center

Wisconsin Univ. - Stout, Menomonie. Center for the Study of Correctional Education.

The Youth Reentry Specialist (YRS) project was designed to coordinate the reentry of handicapped youth from a juvenile corrections facility into special education programs and the world of work. The project's goal was to increase the probability of special education and vocational program participation of handicapped parolees. The project resulted…

Programmatic Research to Design and Develop Improved Instructional Technology for Handicapped Children. Final Report.

ERIC Educational Resources Information Center

Schiefelbusch, Richard L.; Lent, James R.

Presented is the final report for Project MORE (Mediated Operational Research for Education), a program to create a full-scale operational system for developing product prototypes (methods and materials packages) for teaching personal appearance and hygiene skills to the trainable mentally retarded child. Reviewed in part I is the history of the…

Development of Home Health Aide Curriculum Project. Final Report.

ERIC Educational Resources Information Center

Brown, Patricia

This package contains materials intended for use in a new home health aide curriculum that is designed to be presented as a two-quarter program at Tacoma Community College in Tacoma, Washington. Included in the package are a final report outlining the objectives and outcomes of the project to develop a home health aide curriculum that would meet…

Development of Science Simulations for Mildly Mentally Retarded or Learning Disabled Students. Final Report.

ERIC Educational Resources Information Center

Macro Systems, Inc., Silver Spring, MD.

This final report describes the development of eight computer based science simulations designed for use with middle school mainstreamed students having learning disabilities or mild mental retardation. The total program includes software, a teacher's manual, 3 videos, and a set of 30 activity worksheets. Special features of the software for…

The Indiana Deafblind Services Project: Services for Children with Deafblindness Program. Final Performance Report.

ERIC Educational Resources Information Center

Indiana State Univ., Terre Haute. Blumberg Center for Interdisciplinary Studies in Special Education.

This final report describes activities and accomplishments of the Indiana Deaf-Blind Services Project, a 4-year federally funded project to enhance and further develop coordinated direct services to children and youth, birth through 2 and ages 18 through 21. The project also was designed to provide technical assistance to public and private…

The Elder Abuse Prevention Project, Phase Two, Three and Four. Final Report.

ERIC Educational Resources Information Center

Regina Univ. (Saskatchewan). Univ. Extension. Seniors Education Centre.

This document presents the final report from an educational and community development program designed to raise awareness about the abuse and neglect of the elderly. The Elder Abuse Prevention Project is briefly described in terms of project goals, objectives, the model used, the target groups served, and the evaluation processes employed. It is…

A Home-Based Media Approach for Developing Critical Skills in Young Visually Impaired Children. Final Report.

ERIC Educational Resources Information Center

Moore, Sheri Bortner

The final report summarizes beginnings as well as accomplishments of a program designed to develop materials for parents and teachers working with visually impaired children at the birth-24 month developmental level. The focus of the materials was to help parents and teachers prevent and remediate developmental lags associated with visual…

A Senior High School Interdisciplinary Humanities Curriculum. Final Report.

ERIC Educational Resources Information Center

City Univ. of New York, NY. Hunter Coll. High School.

The Hunter College High School Twelfth grade humanities curriculum was designed to end the artificiality between life and learning as found in the traditional program of studies. An effort was made to restructure the final year of high school to focus on Man rather than subjects, to see the interrelationships of the disciplines, and to end the…

Modular Radioisotope Thermoelectric Generator (RTG) Program. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-31

Section 2.0 of this report summarizes the MOD-RTG reference flight design, and Section 3.0 discusses the Ground Demonstration System design. Multicouple technology development is discussed in Section 4.0, and Section 5.0 lists all published technical papers prepared during the course of the contract.

Application of Computer Graphics to Graphing in Algebra and Trigonometry. Final Report.

ERIC Educational Resources Information Center

Morris, J. Richard

This project was designed to improve the graphing competency of students in elementary algebra, intermediate algebra, and trigonometry courses at Virginia Commonwealth University. Computer graphics programs were designed using an Apple II Plus computer and implemented using Pascal. The software package is interactive and gives students control…

Software Partitioning Schemes for Advanced Simulation Computer Systems. Final Report.

ERIC Educational Resources Information Center

Clymer, S. J.

Conducted to design software partitioning techniques for use by the Air Force to partition a large flight simulator program for optimal execution on alternative configurations, this study resulted in a mathematical model which defines characteristics for an optimal partition, and a manually demonstrated partitioning algorithm design which…

Swimming Pools. A Guide to Their Planning, Design and Operation.

ERIC Educational Resources Information Center

Gabrielsen, M. Alexander, Ed.

Information is presented regarding all phases of swimming pool development and operation from earliest planning considerations to final programing. This comprehensive book covers--(1) the steps involved in planning a pool, (2) designing the pool, (3) water circulation, filtration, and treatment, (4) community pools, school and agency pools, and…

Hybrid Vehicle Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1984-06-01

This report summarizes the activities on the Hybrid Vehicle Program. The program objectives and the vehicle specifications are reviewed. The Hybrid Vehicle has been designed so that maximum use can be made of existing production components with a minimum compromise to program goals. The program status as of the February 9-10 Hardware Test Review is presented, and discussions of the vehicle subsystem, the hybrid propulsion subsystem, the battery subsystem, and the test mule programs are included. Other program aspects included are quality assurance and support equipment. 16 references, 132 figures, 47 tables.

EPA Region 2 SEMS_CERCLIS Sites All [R2] and SEMS_CERCLIS Sites NPL [R2] GIS Layers

EPA Pesticide Factsheets

The Region 2 SEMS_CERCLIS Sites All [R2] GIS layer contains unique Superfund Enterprise Management System (SEMS) site records. These records have the following NPL_STATUS designations: CURRENTLY ON FINAL NPL, DELETED FROM FINAL NPL, NOT ON NPL, PROPOSED FOR NPL, REMOVED FROM PROPOSED NPL, and SITE IS PART OF NPL SITE. The Region 2 SEMS_CERCLIS NPL Sites [R2] GIS layer only has SEMS records with the following NPL_STATUS designations: 'CURRENTLY ON FINAL NPL', 'DELETED FROM FINAL NPL', 'PROPOSED FOR NPL'.The Superfund Enterprise Management System (SEMS) is EPA's official record for tracking hazardous waste sites, potentially hazardous waste sites, and remedial activities performed in support of the Superfund Program across the nation. This includes sites that are on the National Priorities List (NPL) or are being considered for the NPL. SEMS represents a joint development and ongoing collaboration between Superfund's Remedial, Removal, Federal Facilities, Enforcement, and Emergency Response programs. It provides its wide audience base with a means of ongoing analysis of Superfund Program activities and informational needs at the site, regional management, and national management levels. The customers of SEMS or SEMS data are five EPA Headquarters offices and regional staff, citizens, the regulated community, other Federal agencies, States, Tribes, local agencies, and industry. SEMS stakeholders are States, Congress, other Federal agencies, industry groups, and cit

Lessons from a pilot program to induce stove replacements in Chile: design, implementation and evaluation

NASA Astrophysics Data System (ADS)

Gómez, Walter; Chávez, Carlos; Salgado, Hugo; Vásquez, Felipe

2017-11-01

We present the design, implementation, and evaluation of a subsidy program to introduce cleaner and more efficient household wood combustion technologies. The program was conducted in the city of Temuco, one of the most polluted cities in southern Chile, as a pilot study to design a new national stove replacement initiative for pollution control. In this city, around 90% of the total emissions of suspended particulate matter is caused by households burning wood. We created a simulated market in which households could choose among different combustion technologies with an assigned subsidy. The subsidy was a relevant factor in the decision to participate, and the inability to secure credit was a significant constraint for the participation of low-income households. Due to several practical difficulties and challenges associated with the implementation of large-scale programs that encourage technological innovation at the household level, it is strongly advisable to start with a small-scale pilot that can provide useful insights into the final design of a fuller, larger-scale program.

Servicemembers Opportunity Colleges 1972-1997. (Submitted as Part of SOC Final FY 96 Report.)

ERIC Educational Resources Information Center

Anderson, Clinton L.

This book traces the history of the Servicemembers Opportunity College (SOC) program, which allows military personnel to obtain civilian education at more that 1,000 designated community colleges, technical institutes, and four-year institutions nationwide. Among the topics discussed in this history of the SOC program's development as the…

Arts Education Inservice Training Project for Curriculum Specialists and Other Administrators. Final Report.

ERIC Educational Resources Information Center

Kase-Polisini, Judith; And Others

An evaluation of the Artists-in-the-Schools (AIS) Program of Hillsborough County, Florida, showed that there was a need for more communication between AIS and the schools. Therefore, an arts education program was designed and implemented by AIS staff. Invited participants included curriculum specialists, principals, supervisory personnel, school…

Articulated Instruction Objectives Guide for Drafting. Final Document for Articulation of Drafting.

ERIC Educational Resources Information Center

Henderson, Wm. Edward, Jr.

Intended for use in competency-based and criterion-referenced vocational programs, this articulated, performance-based instruction objectives guide for Drafting I is designed for reference use in the articulation of drafting programs at the secondary and postsecondary levels. It consists of a description of the development of the guide, 14…

Local/State Bilingual Project. 1981-82 Final Technical Report. Appendixes.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

The 1981-82 Local/State Bilingual Program Technical Report addresses the evaluation questions of the Local/State Bilingual Program Evaluation Design. It is organized into six appendixes. Each appendix reports the information collected by a specific measure. Each appendix consists of (1) an instrument description, (2) purpose of the measure, (3)…

Development of a Post-Master's Fellowship Program in Oncology Nursing Education. Final Report.

ERIC Educational Resources Information Center

Siegele, Dorothy; Henderson, Billie

A one-year Post-Master's Fellowship in Oncology Nursing Education for nurse educators was developed through the collaboration of San Jose State University (California) and University of Alabama at Birmingham. The project was designed to: develop or update undergraduate/graduate oncology nursing programs; provide continuing education for practicing…

An Analysis of Activities in Preschool Settings. Final Report.

ERIC Educational Resources Information Center

Berk, Laura E.

This research was aimed at an analysis of classroom activities which make up educational programs for young children. Its broad purpose was to analyze systematically and to make comparisons among six preschool programs in order to describe the patterns of activity settings used; the objectives activity settings were designed to reach from the…

Traffic management centers : the state-of-the-practice : task A : final working paper for design of support systems for advanced traffic management systems

DOT National Transportation Integrated Search

1999-02-01

The goal of the Federal Highway Administration (FHWA) Expert Systems for Crash Data Collection Program was to use expert system technology to improve the accuracy and consistency of police-reported data. The program included the development and evalu...

Workplace Literacy Program (WPL) at Chinatown Manpower Project, Inc. Final Evaluation.

ERIC Educational Resources Information Center

Friedenberg, Joan E.

This document describes the procedures for and results of the external evaluation of the workplace literacy program for underemployed garment industry workers with low English skills at Chinatown Manpower Project, Inc. in Chinatown in New York City. The document describes the evaluation design and methodology as well as the evaluation results,…

Evaluation of New Texas Charter Schools: Final Report (2007-10)

ERIC Educational Resources Information Center

Maloney, Catherine; Sheehan, Daniel; Rainey, Katharine

2011-01-01

Since 1994, the U.S. Department of Education (USDE) has provided funding to new charter schools through Charter School Program (CSP) grants designed to provide support for the planning and implementation of effective new charter programs. Grants are awarded to state education agencies, which then provide funding to approved charter schools through…

An Operational Blueprint for Health Career Education and Training Program. Final Report.

ERIC Educational Resources Information Center

Hood, Theresa W.; Thompson, Christopher W.

An operational blueprint for health career education and training was designed to provide the District of Columbia public schools with a documented strategy for implementing a comprehensive, multifocal health careers program. The blueprint will establish a mechanism for interagency communication and cooperation at all levels, involving all aspects…

A Computer Simulation Modeling Tool to Assist Colleges in Long-Range Planning. Final Report.

ERIC Educational Resources Information Center

Salmon, Richard; And Others

Long-range planning involves the establishment of educational objectives within a rational philosophy, the design of activities and programs to meet stated objectives, the organization and allocation of resources to implement programs, and the analysis of results in terms of the objectives. Current trends of educational growth and complexity…

On-The-Job Training Program, Educable Mentally Retarded. Final Report.

ERIC Educational Resources Information Center

Pocatello School District 25, ID.

School training and vocational services were combined into a program designed to demonstrate that educable mentally retarded students could develop well rounded working habits that would mutually benefit them and the community. On-the-job training was used as a demonstration of the practical use of academic, social, and vocational skills learned…

The Rural Texas Domestic Violence Health Professionals Education Program. Final Report.

ERIC Educational Resources Information Center

Mountain, Karen; And Others

The Rural Texas Domestic Violence Health Professionals Education Program (RTDVHPEP) was designed as an initial and circumscribed effort in the establishment of a comprehensive network of services for Texas victims of rural domestic violence. Immediate goals of RTDVHPEP were to provide rural health care professionals with knowledge and skills to…

PROJECT EARNING POWER, GRANT RD-1806-G. HISTORY AND FINAL REPORT.

ERIC Educational Resources Information Center

LANGDON, MARGARET

THE PURPOSE OF THE PROJECT WAS TO APPLY CURRENT KNOWLEDGE, METHODS, AND TECHNIQUES IN INDUSTRIAL DESIGN AND PRODUCT DEVELOPMENT TO REHABILITATING THE HANDICAPPED BY USING THE LABOR FORCE AVAILABLE IN SHELTERED WORKSHOPS AND HOMEBOUND PROGRAMS. DEMONSTRATION PROGRAMS WERE ESTABLISHED AS TASK FORCES IN CHICAGO, NEW YORK, AND LOS ANGELES WITH THE…

An Inservice Program for Vocational Teachers of the Disadvantaged. Handbook.

ERIC Educational Resources Information Center

Ehresman, Norman D.; And Others

A product of a research project designed to improve the teaching effectiveness of vocational teachers of disadvantaged students, this handbook includes the specific procedures and materials that can be utilized in an inservice program for vocational teachers of disadvantaged youth. (The final report of this project is contained in a separate…

Unified Database Development Program. Final Report.

ERIC Educational Resources Information Center

Thomas, Everett L., Jr.; Deem, Robert N.

The objective of the unified database (UDB) program was to develop an automated information system that would be useful in the design, development, testing, and support of new Air Force aircraft weapon systems. Primary emphasis was on the development of: (1) a historical logistics data repository system to provide convenient and timely access to…

Reaching the Environmental Community: Designing an Information Program for the NREL Biofuels Program; May 2002-May 2003

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ames, J.; Werner, C.

2003-08-01

Final report on subcontract for holding two briefings for policymakers and the environmental community on environmental issues related to biofuels; one on one on the energy and environmental issues associated with biofuels production and use, and the other on implications of pending renewable fuels standard legislation.

A Program to Enhance the Effectiveness of Teaching Assistants.

ERIC Educational Resources Information Center

Cornell Univ., Ithaca, NY. Coll. of Engineering.

This manual is the final report on a two-year project to enhance the effectiveness of teaching assistants. It is designed as a workbook for persons conducting instructional programs for teaching assistants and is specific to teaching assistants in engineering and the natural sciences. The manual contains an introduction and six chapters. Chapter…

Studies on the Use of Extramural Videopublished Materials in Continuing Education. Final Report.

ERIC Educational Resources Information Center

Sjogren, Douglas; And Others

The Engineering Renewal and Growth (ERG) program at Colorado State University (CSU) was designed for continuing education of engineers. The program used videotapes and coordinated written materials to deliver instruction to the practicing engineer. Courses were leased to individual students or industries in which students worked. The courses were…

A Model Business and Industrial Development Program for Community Colleges. Final Report.

ERIC Educational Resources Information Center

Texas Coll. and Univ. System, Austin. Coordinating Board.

Designed to help community and junior colleges in Texas establish their own approach to economic development services, this report reviews innovative programs providing assistance to business and industry in many parts of the United States. After chapter I discusses the changing role of community and junior colleges in economic development…

DoD Key Technologies Plan

DTIC Science & Technology

1992-07-01

methodologies ; software performance analysis; software testing; and concurrent languages. Finally, efforts in algorithms, which are primarily designed to upgrade...These codes provide a powerful research tool for testing new concepts and designs prior to experimental implementation. DoE’s laser program has also...development, and specially designed production facilities. World leadership in bth non -fluorinated and fluorinated materials resides in the U.S. but Japan

Design requirements for plasma facing materials in ITER

NASA Astrophysics Data System (ADS)

Matera, R.; Federici, G.; ITER Joint Central Team

1996-10-01

After the official approval of the Interim Design Report, the ITER project enters the final phase of the EDA. With the definition of the design requirements of the high heat flux components, the structural and armor materials' working domain is better specified, allowing to focus the R & D program on the most critical issues and to orient the design of divertor and first wall components towards those concepts which potentially have a better chance to withstand normal and off-normal operating conditions. Among the latter, slow, high-power, high recycling transient are at present driving the design of high heat flux components. Examples of possible design solution under experimental validation in the R & D program are presented and discussed in this paper.

Analytical and physical modeling program for the NASA Lewis Research Center's Altitude Wind Tunnel (AWT)

NASA Technical Reports Server (NTRS)

Abbott, J. M.; Deidrich, J. H.; Groeneweg, J. F.; Povinelli, L. A.; Reid, L.; Reinmann, J. J.; Szuch, J. R.

1985-01-01

An effort is currently underway at the NASA Lewis Research Center to rehabilitate and extend the capabilities of the Altitude Wind Tunnel (AWT). This extended capability will include a maximum test section Mach number of about 0.9 at an altitude of 55,000 ft and a -20 F stagnation temperature (octagonal test section, 20 ft across the flats). In addition, the AWT will include an icing and acoustic research capability. In order to insure a technically sound design, an AWT modeling program (both analytical and physical) was initiated to provide essential input to the AWT final design process. This paper describes the modeling program, including the rationale and criteria used in program definition, and presents some early program results.

A Study of the National Upward Bound and Talent Search Programs. Final Report. Volume I. Review of the Literature Relevant to the Upward Bound and Talent Search Programs.

ERIC Educational Resources Information Center

Davis, Junius A.; Kenyon, Cynthia A.

In this volume is reported the review of related literature that was conducted during the design phase of the study (July 1973 through January 1974). Its purpose was to provide input for the study design. Chapter 1 is a summary of the findings judged most relevant to three basic questions: (1) Who are the disadvantaged, how are they defined, and…

Apollo experience report: Command and service module communications subsystem

NASA Technical Reports Server (NTRS)

Lattier, E. E., Jr.

1974-01-01

The development of spacecraft communications hardware from design to operation is described. Programs, requirements, specifications, and design approaches for a variety of functions (such as voice, telemetry, television, and antennas) are reviewed. Equipment environmental problems such as vibration, extreme temperature variation, and zero gravity are discussed. A review of the development of managerial techniques used in refining the roles of prime and subcontractors is included. The hardware test program is described in detail as it progressed from breadboard design to manned flight system evaluations. Finally, a series of actions is recommended to managers of similar projects to facilitate administration.

Perceived Impact of a Land and Property Rights Program on Violence Against Women in Rural Kenya: A Qualitative Investigation

PubMed Central

Hilliard, Starr; Bukusi, Elizabeth; Grabe, Shelly; Lu, Tiffany; Hatcher, Abigail M.; Kwena, Zachary; Mwaura-Muiru, Esther; Dworkin, Shari L.

2017-01-01

The current study focuses on a community-led land and property rights program in two rural provinces in western Kenya. The program was designed to respond to women’s property rights violations to reduce violence against women and HIV risks at the community level. Through in-depth interviews with 30 women, we examine the perceived impact that this community-level property rights program had on violence against women at the individual and community level. We also examine perceptions as to how reductions in violence were achieved. Finally, we consider how our findings may aid researchers in the design of structural violence-prevention strategies. PMID:26951306

Perceived Impact of a Land and Property Rights Program on Violence Against Women in Rural Kenya: A Qualitative Investigation.

PubMed

Hilliard, Starr; Bukusi, Elizabeth; Grabe, Shelly; Lu, Tiffany; Hatcher, Abigail M; Kwena, Zachary; Mwaura-Muiru, Esther; Dworkin, Shari L

2016-03-06

The current study focuses on a community-led land and property rights program in two rural provinces in western Kenya. The program was designed to respond to women's property rights violations to reduce violence against women and HIV risks at the community level. Through in-depth interviews with 30 women, we examine the perceived impact that this community-level property rights program had on violence against women at the individual and community level. We also examine perceptions as to how reductions in violence were achieved. Finally, we consider how our findings may aid researchers in the design of structural violence-prevention strategies. © The Author(s) 2016.

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1999-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-2110 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition, several modeling issues for the design of shells of revolution were studied.

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1998-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-1808 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition several modeling issues for the design of shells of revolution were studied.

Directing folding pathways for multi-component DNA origami nanostructures with complex topology

NASA Astrophysics Data System (ADS)

Marras, A. E.; Zhou, L.; Kolliopoulos, V.; Su, H.-J.; Castro, C. E.

2016-05-01

Molecular self-assembly has become a well-established technique to design complex nanostructures and hierarchical mesoscale assemblies. The typical approach is to design binding complementarity into nucleotide or amino acid sequences to achieve the desired final geometry. However, with an increasing interest in dynamic nanodevices, the need to design structures with motion has necessitated the development of multi-component structures. While this has been achieved through hierarchical assembly of similar structural units, here we focus on the assembly of topologically complex structures, specifically with concentric components, where post-folding assembly is not feasible. We exploit the ability to direct folding pathways to program the sequence of assembly and present a novel approach of designing the strand topology of intermediate folding states to program the topology of the final structure, in this case a DNA origami slider structure that functions much like a piston-cylinder assembly in an engine. The ability to program the sequence and control orientation and topology of multi-component DNA origami nanostructures provides a foundation for a new class of structures with internal and external moving parts and complex scaffold topology. Furthermore, this work provides critical insight to guide the design of intermediate states along a DNA origami folding pathway and to further understand the details of DNA origami self-assembly to more broadly control folding states and landscapes.

High Voltage Insulation Technology

NASA Astrophysics Data System (ADS)

Scherb, V.; Rogalla, K.; Gollor, M.

2008-09-01

In preparation of new Electronic Power Conditioners (EPC's) for Travelling Wave Tub Amplifiers (TWTA's) on telecom satellites a study for the development of new high voltage insulation technology is performed. The initiative is mandatory to allow compact designs and to enable higher operating voltages. In a first task a market analysis was performed, comparing different materials with respect to their properties and processes. A hierarchy of selection criteria was established and finally five material candidates (4 Epoxy resins and 1 Polyurethane resin) were selected to be further investigated in the test program. Samples for the test program were designed to represent core elements of an EPC, the high voltage transformer and Printed Circuit Boards of the high voltage section. All five materials were assessed in the practical work flow of the potting process and electrical, mechanical, thermal and lifetime testing was performed. Although the lifetime tests results were overlayed by a larges scatter, finally two candidates have been identified for use in a subsequent qualification program. This activity forms part of element 5 of the ESA ARTES Programme.

Home Start Followup Study: A Study of Long-Term Impact of Home Start on Program Participants. Final Report.

ERIC Educational Resources Information Center

Bache, William; And Others

This Home Start followup study was designed to determine the long-term impact of Home Start on program participants in sixteen states within the USA. Home Start was a three-year demonstration program which provided Head Start-type comprehensive services to young children (3- to 5-year-olds) and their families in their homes. In Chapter 1…

Development and Implementation of Training Curriculum/Program in Solar Heating and Cooling at the Technician Level, December 1, 1976 - November 30, 1977. Final Report.

ERIC Educational Resources Information Center

Kuhnle, Carl J., Jr.

The program proposal is designed to address the increasing demand for trained personnel to support the installation and maintenance of solar energy systems at residential and commercial sites. The three main objectives of the proposed program are: (1) to develop a flexible curricula to train a solar heating and cooling workforce; (2) to identify…

Effects of Field and Job Oriented Technical Retraining on Manpower Utilization of the Unemployed. Vocational-Industrial Education Research Report. Final Report.

ERIC Educational Resources Information Center

Bjorkquist, David C.

A job-oriented program emphasizing application to the specific occupation of tool design was compared with a field-oriented program intended to give a broad basic preparation for a variety of jobs in the field of mechanical technology. Both programs were conducted under the Manpower Development and Training Act (MDTA) for a period of 52 weeks.…

Evaluation of a Community-Based Program That Integrates Joyful Movement Into Fall Prevention for Older Adults

PubMed Central

Carlucci, Celeste; Kardachi, Julie; Bradley, Sara M.; Prager, Jason; Wyka, Katarzyna

2018-01-01

Background: Despite the development of evidence-based fall-prevention programs, there remains a need for programming that will engage older adults in real-world settings. Objective: This study aimed to evaluate a community-based group program that integrates joyful movement into fall prevention. The curriculum emphasizes a positive experience of movement, cultivating a healthy body image, and retraining of biomechanics. Design: Program evaluation was conducted using a one-group pre–post test study design. Key outcomes were functional balance and confidence. Qualitative feedback was gathered at the final class sessions. Results: Two hundred fifteen older adults enrolled at four sites over the period from 2010 to 2014. Among 86 participants who provided feedback, most credited the program for an increased sense of optimism and/or confidence (70%), and better walking ability (50%). Among 102 participants who completed both initial and final assessments, there was evidence of significant improvements on the Functional Reach Test (d = .60, p < .001) and Modified Falls Efficacy Scale (d = .17, p < .001). Conclusion: A joyful movement curriculum is acceptable to older participants, and they show improvements in functional balance and confidence. Future research should examine whether the positive changes encouraged by joyful movement lead to lasting reductions in fall risk and additional health benefits. PMID:29796405

A Recruitment Package for Postsecondary Vocational Education. Final From August 1, 1983 to August 31, 1984. Final Report.

ERIC Educational Resources Information Center

Waltz, Freddie C.; And Others

This recruitment package consists of materials designed to assist those individuals who are responsible for recruiting students into postsecondary vocational education programs. The package, which may be used either as a guide to establishing and implementing a new promotional policy or as a resource to use when planning a specific promotional…

California Deaf-Blind Services Final Report, October 1, 1995-September 30, 1999 [and] October 1, 1999-June 30, 2000 (No Cost Extension).

ERIC Educational Resources Information Center

Goertz, Lori; Franklin, Barbara

This final report describes the activities and outcomes of the California Deaf-Blind Services (CDBS) program, a regionally based, family focused technical assistance and training project designed to improve services to children with deaf-blindness. The project conducted the following activities: (1) provided technical assistance to families and…

Design of a Personnel and Training Information System for Educational R&D Personnel. Final Report.

ERIC Educational Resources Information Center

Hood, Paul D.; McCutchan, Nancy A.

The primary objective of this project was to design a system to provide information services that would fulfill the information requirements of federal planners, instructional material developers, training program directors and instructors, students, interns, employers, and practitioners concerned with problems relating to personnel and training…

Designing Training Plans for Distributive Education. Final Report.

ERIC Educational Resources Information Center

Syhlman, William D.

These distributive education training and development plans for secondary-level programs provide lists of competencies a student needs to hold a job in sales and marketing occupational areas. The design of the training plans is based on a "pyramid" which incorporates the following five sections or levels of competencies (from general to…

Evaluation Design: 1981-82 State Compensatory Education. Publication No. 81.20.

ERIC Educational Resources Information Center

Mangino, Evangelina; And Others

The evaluation of the 1981-82 State Compensatory Education (SCE) program, as implemented in the Austin Independent School District, will involve the following major activities: production of an Evaluation Design based on input received from key SCE personnel; production of a Final Report and a Technical Report which present information and…

76 FR 79114 - Tire Fuel Efficiency Consumer Information Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... reference ASTM International E 501-08, ``Standard Specification for Standard Rib Tire for Pavement Skid... noted that the language of the preamble and the final rule appeared to be designed to address two... revised is when design changes to a tire affect the accuracy of the rating information and necessitate the...

Post-Secondary Vocational Home Economics Instructional Materials Needs Assessment Project: State-of-the-Art and Final Report.

ERIC Educational Resources Information Center

Glosson, Linda R.; Bowers, Candice H.

A Texas project assessed postsecondary vocational home economics instructors' needs for instructional media and materials as well as the need for training in the development of curriculum materials. Relevant post-secondary programs identified were child development, food service/dietetics, fashion design/tailoring, and interior design. In…

The Utilization and Design of Physical Facilities for the Rehabilitation of Mentally Retarded. Final Project Report.

ERIC Educational Resources Information Center

Bair, Howard V.; Leland, Henry

To investigate the appropriate design and utilization of physical facilities being constructed as a rehabilitation center, a variety of centers was examined. Conclusions were that flexibility in construction of the physical plant, including nonpermanent walls and fixtures was necessary; program planning should be included in architectural…

LSI (Large Scale Integrated) Design for Testability. Final Report of Design, Demonstration, and Testability Analysis.

DTIC Science & Technology

1983-11-01

compound operations, with status. (h) Pre-programmed CRC and double-precision multiply/divide algo- rithms. (i) Double length accumulator with full...IH1.25 _ - MICROCOP ’ RESOLUTION TEST CHART NATIONAL BUREAU OF STANDARDS-1963-A .4 ’* • • . - . .. •. . . . . . . . . . . . . . • - -. .• ,. o. . . .- "o

Evaluation of a Mediated Program for Training Teachers of Exceptional Children in Instructional Development. Final Report 51.2.

ERIC Educational Resources Information Center

Thiagarajan, Sivasailam; Stolovitch, Harold D.

The document describes a project to design, develop, and evaluate a set of audiovisual training modules to augment a sourcebook for special education teacher trainees and to assist trainers and curriculum developers in the design of teacher training materials. It is explained in Chapter I that the project involved the 4-D Model--Define, Design,…

Core I Materials for Metropolitan Agriculture/Horticulture Programs. Units G-J.

ERIC Educational Resources Information Center

Ethridge, Jim; And Others

These units of instructional materials and teaching aids are the final four of a series of 10 designed for use in metropolitan agriculture/horticulture programs for students in grades 9 and 10. Covered in the unit on growing and managing horticultural crops are watering plants; pruning, pinching, and planting plants; using plant production…

An Interactive Videodisc Program To Evaluate and Train Job-Related Math Skills for Transition. Final Report.

ERIC Educational Resources Information Center

Harris, Carolyn DeMeyer; And Others

The project designed and developed a videodisc package that provides both assessment and related instruction programs for job-related mathematics problem solving, using simulations to provide direct access to vocational situations. The materials are intended to meet the needs of youth and young adults with mild mental handicaps in transition from…

Evaluation of a College Curriculum Advisory Program Utilizing Student Advisors. Final Report.

ERIC Educational Resources Information Center

Brown, Coke R.

This study was designed to evaluate the viability of using students as academic advisors for freshmen students and to document the process of the advising program at Idaho State University. Results show that students advised by students did as well academically and had a lower dropout rate than students advised by faculty. Descriptions of advisor…

The Partnerships Project: Linking Educational Opportunity and Community Development To Revitalize Rural Communities into Global Villages. Final Report.

ERIC Educational Resources Information Center

Emery, Mary E.

Lewis-Clark State College, Idaho, developed a model program, Partnerships Project, designed to provide rural community residents with access to higher education and to assist communities in increasing their local capacity for development. In pursuing these objectives, the program helped to change the nature of the postsecondary undertaking in…

Evaluation Reports of ESEA, Title III Projects: Final Report, FY 1972.

ERIC Educational Resources Information Center

District of Columbia Public Schools, Washington, DC. Dept. of Research and Evaluation.

Through Title III of the Elementary Secondary Education Act of 1965, six programs were funded in Washington, D.C. public schools to meet the educational needs of handicapped disadvantaged children. One of the programs, the Columbia Road Pre-School Pilot Project was designed to serve as an experimental model for early childhood education for…

Comparing Livestock Enterprises for the Optimum Combination of Labor and Capital Resources to Produce Maximum Income. Final Report.

ERIC Educational Resources Information Center

Ratcliff, Dale L.

Designed as a tool for vocational agriculture instructors to use in helping their students plan livestock enterprises that they will use as a part of their supervised occupational experience programs, this microcomputer program enables students to compare livestock enterprises for optimum combination of labor and capital resources to produce…

Detailed technical plan for Test Program Element-III (TPE-III) of the first wall/blanket shield engineering test program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, L.R.; Praeg, W.F.

1982-03-01

The experimental requirements, test-bed design, and computational requirements are reviewed and updated. Next, in Sections 3, 4 and 5, the experimental plan, instrumentation, and computer plan, respectively, are described. Finally, Section 6 treats other considerations, such as personnel, outside participation, and distribution of results.

Instructional Modules to Teach Primary Care Residents to Educate Patients. Executive Summary, Final Report, [and Instructional Manual].

ERIC Educational Resources Information Center

Fass, Marion Field

An instructional program in patient education skills for primary care medical residencies is described, with six instructional modules included. The federally-funded program, developed by the University of Wisconsin, was designed to enable physicians to better communicate with their patients about health, disease, and treatment. The six modular…

Navy Virginia (SSN-774) Class Attack Submarine Procurement: Background and Issues for Congress

DTIC Science & Technology

2015-12-17

Engineers Journal, No. 4, 2009: 79-94; and John D. Butler, “The Sweet Smell of Acquisition Success,” U.S. Naval Institute Proceedings, June 2011: 22...update cost estimates soon based on the final concept design, but so far the program has been successful in sticking to its cost goals. The program

Preservation at Stony Brook. Preservation Planning Program. Study Report.

ERIC Educational Resources Information Center

Cook, Donald C.; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the State University of New York (SUNY), Stony Brook, working with the Association of Research Libraries' (ARL) Office of Management Studies (OMS). The PPP is designed to put self-help tools into the hands of library staff responsible for developing…

Incentive and Disincentive to Participation in the Work Incentive Program. Final Report.

ERIC Educational Resources Information Center

Garvin, Charles D., Ed.

Initially this report presents a summary of three Work Incentive Programs (WIN) undertaken by a consortium of schools of social work at the University of Chicago, University of Michigan, and Case Western Reserve University, discussing in detail the design, major findings, and recommendations made. The next two chapters are devoted to discussions…

Lessons Learned: Job Skills Education Program. Final Report.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

The Job Skills Education Program (JSEP) is a computer-based, functional basic skills curriculum and instructional delivery system originally designed for the U.S. Department of the Army. The U.S. Department of Labor funded an exploration of the feasibility of increasing the use of JSEP as a workplace literacy tool for employers. It was found that…

[Municipalities as a Model for New Careers and Redirection of Vocational-Technical Education Programs.] Final Report.

ERIC Educational Resources Information Center

Institute for Local Self Government, Berkeley, CA.

To meet the manpower needs of local governments, the model developed for this project redirects national and technical education toward new careers programs. Designed by task forces of professional personnel, the model utilizes existing local government resources, including funds for new career activities. Accomplishments of the project include:…

User-Adaptable Microcomputer Graphics Software for Life Science Instruction. Final Project Report.

ERIC Educational Resources Information Center

Spain, James D.

The objectives of the SUMIT project was to develop, evaluate, and disseminate 20 course modules (microcomputer programs) for instruction in general biology and ecology. To encourage broad utilization, the programs were designed for the Apple II microcomputer and written in Applesoft Basic with a user-adaptable format. Each package focused on a key…

THE TREATMENT OF DISRUPTIVE CLASSROOM BEHAVIOR PROBLEMS BY EMPLOYMENT OF A PARTIAL-MILIEU CONSISTENCY PROGRAM. FINAL REPORT.

ERIC Educational Resources Information Center

COLLINS, RONALD C.

THIS STUDY ATTEMPTED TO DEVELOP AND EVALUATE A TREATMENT PROCEDURE DESIGNED TO REDUCE THE INCIDENCE OF MALADAPTIVE BEHAVIORS IN PUBLIC SCHOOL CLASSROOMS. THE TREATMENT PROCEDURE ATTEMPTED TO PROVIDE ENVIRONMENTAL CONSISTENCY IN THE CHILD'S ENVIRONMENT. IT WAS HYPOTHESIZED THAT GIVEN A PROGRAM OF HOME-SCHOOL CONSISTENCY, UNYIELDING FOR COMPLIANCE…

Building and Craft Skills Apprenticeship and Pre-Apprenticeship Grant. Cooperative Demonstration Program (High Technology). Final Performance Report.

ERIC Educational Resources Information Center

Building Industry Association of Spokane, Inc., WA.

A Spokane, Washington, program was designed to offer training and employment opportunities within the residential and commercial construction industries to females, minorities, incarcerated persons, veterans, and economically disadvantaged men and women. A total of 21 classes with a total of 3,116 training hours were offered to 277 participants.…

The Nature-Computer Camp. Final Evaluation Report, 1982-1983. E.C.I.A. Chapter 2.

ERIC Educational Resources Information Center

District of Columbia Public Schools, Washington, DC. Div. of Quality Assurance.

This report presents a description and evaluation of the Nature-Computer Camp (NCC), an environmental and computer science program designed for sixth grade students in the District of Columbia public schools. Among the major components of the program were: planning for administration of operating the camp and for instruction in environmental…

Hospital Job Skills Enhancement Program: A Workplace Literacy Project. Final Evaluation Report.

ERIC Educational Resources Information Center

Nurss, Joanne R.

A workplace literacy program was designed to improve the literacy skills of entry-level workers in the housekeeping, food service, and laundry departments of Grady Memorial Hospital in Atlanta. Classes were held twice per week for 36 weeks at the hospital on job time. Literacy was defined as reading, writing, oral communication, and problem…

Supplemental Driver Safety Program Development. Volume I--Development Research and Evaluation. Final Report.

ERIC Educational Resources Information Center

McPherson, Kenard; And Others

Instructional modules for driver education programs were prepared to improve safe driving knowledge, attitudes, and performances of 16- to 18-year-old drivers. These modules were designed to provide supplementary instruction in five content areas critical to the safe and efficient operation of motor vehicles by young drivers--speed management,…

Institute for Training Minority Group Research and Evaluation Specialists. Final Report.

ERIC Educational Resources Information Center

Brown, Roscoe C., Jr.

The Institute for Training Minority Group Research and Evaluation Specialists comprised 4 programs in 1: (1) a 6-week graduate course at New York University (NYU) during the 1970 summer session for 20 minority group persons that provided training in research design, statistics, data collection and analysis, and report writing; (2) a program of…

A COMPARISON OF MATHEMATICS PROGRAMS FOR ABLE JUNIOR HIGH SCHOOL STUDENTS, VOLUME 1 - FINAL REPORT.

ERIC Educational Resources Information Center

GOLDBERG, MIRIAM L.; AND OTHERS

THE TALENTED YOUTH PROJECT (TYP) MATHEMATICS STUDY WAS DESIGNED AS A STUDY TO COMPARE THE EFFECTIVENESS OF VARIOUS CURRICULUM PATTERNS AND PRACTICES IN MATHEMATICS EDUCATION CURRENTLY USED WITH ACADEMICALLY TALENTED JUNIOR HIGH SCHOOL STUDENTS. THE SAMPLE CONSISTED OF 51 CLASSES AND 6 MATHEMATICS PROGRAMS. THE LORGE-THORNDIKE VERBAL INTELLIGENCE…

Models and Procedures for Improving the Planning, Management, and Evaluation of Cooperative Education Programs. Final Report. Volume I.

ERIC Educational Resources Information Center

Blaschke, Charles L.; Steiger, JoAnn

This report of a project to design a set of training guidelines for planning, managing, and evaluating cooperative education programs describes briefly the procedures used in developing the guidelines and model; discusses the various components of the planning, management, and evaluation process; and presents guidelines and criteria for designing…

Preliminary design polymeric materials experiment. [for space shuttles and Spacelab missions

NASA Technical Reports Server (NTRS)

Mattingly, S. G.; Rude, E. T.; Marshner, R. L.

1975-01-01

A typical Advanced Technology Laboratory mission flight plan was developed and used as a guideline for the identification of a number of experiment considerations. The experiment logistics beginning with sample preparation and ending with sample analysis are then overlaid on the mission in order to have a complete picture of the design requirements. The results of this preliminary design study fall into two categories. First specific preliminary designs of experiment hardware which is adaptable to a variety of mission requirements. Second, identification of those mission considerations which affect hardware design and will require further definition prior to final design. Finally, a program plan is presented which will provide the necessary experiment hardware in a realistic time period to match the planned shuttle flights. A bibliography of all material reviewed and consulted but not specifically referenced is provided.

DESIGN METHODOLOGIES AND TOOLS FOR SINGLE-FLUX QUANTUM LOGIC CIRCUITS

DTIC Science & Technology

2017-10-01

DESIGN METHODOLOGIES AND TOOLS FOR SINGLE-FLUX QUANTUM LOGIC CIRCUITS UNIVERSITY OF SOUTHERN CALIFORNIA OCTOBER 2017 FINAL...SUBTITLE DESIGN METHODOLOGIES AND TOOLS FOR SINGLE-FLUX QUANTUM LOGIC CIRCUITS 5a. CONTRACT NUMBER FA8750-15-C-0203 5b. GRANT NUMBER N/A 5c. PROGRAM...of this project was to investigate the state-of-the-art in design and optimization of single-flux quantum (SFQ) logic circuits, e.g., RSFQ and ERSFQ

Department of Defense’s Waiver of Competitive Prototyping Requirement for Enhanced Polar System Program

DTIC Science & Technology

2012-08-23

objectives. Finally, the CAPS acquisition strategy anticipates the use of a cost- reimbursement contract for designing and building the system...The CAPS acquisition strategy anticipates the use of a cost- reimbursement contract for designing and building the system; however, it may be... reimbursement contract was chosen for the basic CAPS contract because of the nature of the design work, which includes software design and development

Hot section viewing system

NASA Technical Reports Server (NTRS)

Morey, W. W.

1983-01-01

The objective of the hot section viewing program is to develop a prototype optical system for viewing the interior of a gas turbine combustor during high temperature, high pressure operation in order to produce a visual record of some causes of premature hot section failures. The program began by identifying and analyzing system designs that would provide clearest images while being able to survive the hostile environment inside the combustion chamber. Different illumination methods and computer techniques for image enhancement and analysis were examined during a preliminary test phase. In the final phase of the program the prototype system was designed and fabricated and is currently being tested on a high pressure combustor rig.

Legal implications of monitoring workers for carcinogenic and mutagenic risk.

PubMed

Damme, C J

1982-01-01

Many industries have initiated testing programs designed to identify workers who are especially vulnerable to workplace assaults by carcinogenic or mutagenic agents. This paper examines a number of legal issues attendant on such programs, including disclosure and consent, confidentiality, and other potential liability-producing factors. This paper also briefly looks at the legal issues that might arise if the federal government were to mandate similar programs. Finally, the basic rationale of industrial monitoring programs is discussed within the context of the emerging legal issues.

Clean Air Markets - Compliance Query Wizard

EPA Pesticide Factsheets

The Compliance Query Wizard is part of a suite of Clean Air Markets-related tools that are accessible at http://ampd.epa.gov/ampd/. The Compliance module provides final compliance results. Using the Compliance Query Wizard, the user can find compliance information associated with specific programs, facilities, states or time frames. Quick Reports and Prepackaged Datasets are also available for data that are commonly requested. Final compliance results are available for all years since 1995 for the Acid Rain Program and for the various NOx trading programs EPA has operated since 1999.EPA's Clean Air Markets Division (CAMD) includes several market-based regulatory programs designed to improve air quality and ecosystems. The most well-known of these programs are EPA's Acid Rain Program and the NOx Programs, which reduce emissions of sulfur dioxide (SO2) and nitrogen oxides (NOx)-compounds that adversely affect air quality, the environment, and public health. CAMD also plays an integral role in the development and implementation of the Clean Air Interstate Rule (CAIR).

High-Power Microwave Transmission and Mode Conversion Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vernon, Ronald J.

2015-08-14

This is a final technical report for a long term project to develop improved designs and design tools for the microwave hardware and components associated with the DOE Plasma Fusion Program. We have developed basic theory, software, fabrication techniques, and low-power measurement techniques for the design of microwave hardware associated gyrotrons, microwave mode converters and high-power microwave transmission lines. Specifically, in this report we discuss our work on designing quasi-optical mode converters for single and multiple frequencies, a new method for the analysis of perturbed-wall waveguide mode converters, perturbed-wall launcher design for TE0n mode gyrotrons, quasi-optical traveling-wave resonator design formore » high-power testing of microwave components, and possible improvements to the HSX microwave transmission line.« less

Final Report of the Evaluation of the Directed Learning Program of the Hempstead Public Schools, N.Y., During its Second Year, 1970-1971. ESEA Title I.

ERIC Educational Resources Information Center

Simon, Alan J.

Designed as a comprehensive district-wide elementary education program, the Directed Learning Program, funded under Title I of the 1965 Elementary and Secondary Education Act, is meant to encourage learning at an individual rate related to achievement ability rather than to age. The basic for instruction is the home base group in which students…

The Planning, Programming and Budgeting System (PPBS). A Primer

DTIC Science & Technology

1987-01-01

Commands input through the JCS as well The DRB reviews and resolves major issues , as required, prior t.o final DG publication . DG is designed to...Air Staff action officer, and takes you through a complete PPBS cycle as an aid to better understanding the overall process. You will find that it...JPAM) 34 -- ISSUES 35 -- THE PROGRAM DECISION MEMORANDUM (PDM) 36 - THE BUDGET ESTIMATE SUBMISSION (BES) 37 o BUDGETING 38 - BUDGET REVIEW - PROGRAM

Final Report of the Evaluation of the 1969-1970 Benjamin Franklin Cluster Program: Programs and Patterns for Disadvantaged High School Students. ESEA Title I.

ERIC Educational Resources Information Center

Hoffman, Louis J.

The Cluster Program at Benjamin Franklin High School, funded under Title I of the 1965 Elementary Secondary Education Act, is designed to be a school within a school in which 249 ninth grade students attend classes in two separate clusters. Each cluster is formulated such that all students receive instruction from five teachers in classes whose…

Black liquor gasification phase 2D final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kohl, A.L.; Stewart, A.E.

1988-06-01

This report covers work conducted by Rockwell International under Amendment 5 to Subcontract STR/DOE-12 of Cooperative Agreement DE-AC-05-80CS40341 between St. Regis Corporation (now Champion International) and the Department of Energy (DOE). The work has been designated Phase 2D of the overall program to differentiate it from prior work under the same subcontract. The overall program is aimed at demonstrating the feasibility of and providing design data for the Rockwell process for gasifying Kraft black liquor. In this process, concentrated black liquor is converted into low-Btu fuel gas and reduced melt by reaction with air in a specially designed gasification reactor.

Warm/cold cloud processes

NASA Technical Reports Server (NTRS)

Davis, M. H.

1981-01-01

Final development of a gravimetric test for performance evaluation of a precision saturator is described. The design and development of a prototype droplet levitation chamber is discussed. Technical assistance to the MSFC Airborne Laser Doppler Program is reported.

Lesson 1: Overview of the Final Rule

EPA Pesticide Factsheets

Cross-Media Electronic Reporting Regulation (CROMERR) 101: Fundamentals for States, Tribes, and Local Governments is designed for States, Tribes, and Local Governments that administer EPA-authorized programs under Title 40 of the Code of Federal Regulation

The Robert Wood Johnson Foundation Nurse Faculty Scholars Program: An opportunity for junior nurse faculty

PubMed Central

Coffman, Maren J.; Goodman, Janice H.; Thomas, Tami L.; Roberson, Donna

2014-01-01

The Robert Wood Johnson Foundation Nurse Faculty Scholars program provides promising junior faculty extramural funding, expert mentoring, and the training needed to be successful in the academic role. The Nurse Faculty Scholars program, which admitted its first cohort in 2008, is designed to address the nursing faculty shortage by enhancing leadership, educational, and research skills in junior nursing faculty. This article provides an overview of the program, its purpose, and its eligibility requirements. The authors give strategies for selecting mentors, developing the written application, and preparing for an oral interview. Finally, the authors provide an analysis of funded institutions, research design and methods from current and recently funded projects, and rank and positions held by nursing mentors. PMID:22818282

Designing a Software Tool for Fuzzy Logic Programming

NASA Astrophysics Data System (ADS)

Abietar, José M.; Morcillo, Pedro J.; Moreno, Ginés

2007-12-01

Fuzzy Logic Programming is an interesting and still growing research area that agglutinates the efforts for introducing fuzzy logic into logic programming (LP), in order to incorporate more expressive resources on such languages for dealing with uncertainty and approximated reasoning. The multi-adjoint logic programming approach is a recent and extremely flexible fuzzy logic paradigm for which, unfortunately, we have not found practical tools implemented so far. In this work, we describe a prototype system which is able to directly translate fuzzy logic programs into Prolog code in order to safely execute these residual programs inside any standard Prolog interpreter in a completely transparent way for the final user. We think that the development of such fuzzy languages and programing tools might play an important role in the design of advanced software applications for computational physics, chemistry, mathematics, medicine, industrial control and so on.

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

NASA Astrophysics Data System (ADS)

Li, Shuang; Zhu, Yongsheng; Wang, Yukai

2014-02-01

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.

Final Report Advanced Quasioptical Launcher System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey Neilson

2010-04-30

This program developed an analytical design tool for designing antenna and mirror systems to convert whispering gallery RF modes to Gaussian or HE11 modes. Whispering gallery modes are generated by gyrotrons used for electron cyclotron heating of fusion plasmas in tokamaks. These modes cannot be easily transmitted and must be converted to free space or waveguide modes compatible with transmission line systems.This program improved the capability of SURF3D/LOT, which was initially developed in a previous SBIR program. This suite of codes revolutionized quasi-optical launcher design, and this code, or equivalent codes, are now used worldwide. This program added functionality tomore » SURF3D/LOT to allow creating of more compact launcher and mirror systems and provide direct coupling to corrugated waveguide within the vacuum envelope of the gyrotron. Analysis was also extended to include full-wave analysis of mirror transmission line systems. The code includes a graphical user interface and is available for advanced design of launcher systems.« less

A Pathway to Continued Success on the Job. A Final Report, July 1, 1998-June 30, 1999 [and] Product.

ERIC Educational Resources Information Center

Cort, Maureen A.; Pappalardo, Michele F.; Gonzalez, Manuel A.

This manual was developed by a project to create a model program that integrates basic skills instruction with requirements of welfare reform, and the project's final report describes activities taken to develop the manual. The report details the problem, goals, procedures, objectives met and not met, and an evaluation. The manual is designed to…

Training Personnel for the Education of Individuals with Disabilities Program. Component 2: Preparation of Related Services Personnel (Pediatric Residents). Final Report.

ERIC Educational Resources Information Center

Bruder, Mary Beth

This final report describes the activities and outcomes of a project designed to develop, implement, and evaluate a new three-year longitudinal competency based curriculum for pediatric residents on their role in early intervention and special education. The curriculum consisted of four half-days per month for every resident in an ambulatory…

Vocational Curriculum Modification. Teaching Technical Language to Learning Handicapped Students. Project HIRE: A Curriculum Management System for Instructing the Handicapped. Final Report, Volume 1.

ERIC Educational Resources Information Center

Gardner, David C.; And Others

Volume 1 of the final report on Project HIRE reports the design, development, field-testing, and refining of self-instructional packages to teach entry level technical vocabulary to learning handicapped students mainstreamed in vocational programs. Volume 2, a management handbook, reports the methods and findings concerning development of…

Model Store Curriculum. A Developmental Model for North Dakota Schools. Final Report. Research Series No. 13.

ERIC Educational Resources Information Center

Goschen, Todd; Warcup, Dennis

The final report evaluates the activities of the first nine weeks of a project designed to develop a curriculum guide for a school-model store at a North Dakota high school. The program combines the favorable aspects of both the school store and the model store, providing "live" experiences as well as simulated ones. The Distributive…

Medicare and Social Security: fraud and abuse; civil money penalties for misuse of certain terms, symbols and emblems--HHS. Final rule.

PubMed

1991-08-28

This final rule implements section 428(a) of Public Law 100-360 which authorizes the imposition of civil money penalties for the use--in advertising, solicitations or other communications--of certain words, letters, symbols or emblems associated with the Department of Health and Human Services' Social Security and Medicare programs in a manner that the user knows, or should know, would convey a false impression that (1) the communicated item was approved, endorsed or authorized by the Department or its programs, or (2) the responsible person or organization has some connection with, or authorization from, the Department or these programs. This rulemaking is designed to assist in protecting citizens from misrepresentations concerning the services offered and programs administered by the Social Security Administration and the Health Care Financing Administration.

Application of digital computer APU modeling techniques to control system design.

NASA Technical Reports Server (NTRS)

Bailey, D. A.; Burriss, W. L.

1973-01-01

Study of the required controls for a H2-O2 auxiliary power unit (APU) technology program for the Space Shuttle. A steady-state system digital computer program was prepared and used to optimize initial system design. Analytical models of each system component were included. The program was used to solve a nineteen-dimensional problem, and then time-dependent differential equations were added to the computer program to simulate transient APU system and control. Some system parameters were considered quasi-steady-state, and others were treated as differential variables. The dynamic control analysis proceeded from initial ideal control modeling (which considered one control function and assumed the others to be ideal), stepwise through the system (adding control functions), until all of the control functions and their interactions were considered. In this way, the adequacy of the final control design over the required wide range of APU operating conditions was established.

Sodium sulfur electric vehicle battery engineering program final report, September 2, 1986--June 15, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1993-06-01

In September 1986 a contract was signed between Chloride Silent Power Limited (CSPL) and Sandia National Laboratories (SNL) entitled ``Sodium Sulfur Electric Vehicle Battery Engineering Program``. The aim of the cost shared program was to advance the state of the art of sodium sulfur batteries for electric vehicle propulsion. Initially, the work statement was non-specific in regard to the vehicle to be used as the design and test platform. Under a separate contract with the DOE, Ford Motor Company was designing an advanced electric vehicle drive system. This program, called the ETX II, used a modified Aerostar van for itsmore » platform. In 1987, the ETX II vehicle was adopted for the purposes of this contract. This report details the development and testing of a series of battery designs and concepts which led to the testing, in the US, of three substantial battery deliverables.« less

78 FR 67799 - Qualification, Service, and Use of Crewmembers and Aircraft Dispatchers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

...This final rule revises the training requirements for pilots in air carrier operations. The regulations enhance air carrier pilot training programs by emphasizing the development of pilots' manual handling skills and adding safety-critical tasks such as recovery from stall and upset. The final rule also requires enhanced runway safety training and pilot monitoring training to be incorporated into existing requirements for scenario-based flight training and requires air carriers to implement remedial training programs for pilots. The FAA expects these changes to contribute to a reduction in aviation accidents. Additionally, the final rule revises recordkeeping requirements for communications between the flightcrew and dispatch; ensures that personnel identified as flight attendants have completed flight attendant training and qualification requirements; provides civil enforcement authority for making fraudulent statements; and, provides a number of conforming and technical changes to existing air carrier crewmember training and qualification requirements. The final rule also includes provisions that provide opportunities for air carriers to modify training program requirements for flightcrew members when the air carrier operates multiple aircraft types with similar design and flight handling characteristics.

Optical synthesizer for a large quadrant-array CCD camera: Center director's discretionary fund

NASA Technical Reports Server (NTRS)

Hagyard, Mona J.

1992-01-01

The objective of this program was to design and develop an optical device, an optical synthesizer, that focuses four contiguous quadrants of a solar image on four spatially separated CCD arrays that are part of a unique CCD camera system. This camera and the optical synthesizer will be part of the new NASA-Marshall Experimental Vector Magnetograph, and instrument developed to measure the Sun's magnetic field as accurately as present technology allows. The tasks undertaken in the program are outlined and the final detailed optical design is presented.

Initiatives and resources to promote antimicrobial stewardship.

PubMed

Paño-Pardo, José Ramón; Campos, José; Natera Kindelán, Clara; Ramos, Antonio

2013-09-01

The development of an antimicrobial stewardship program (ASP) requires institutional support. However, obtaining sufficient institutional support is often a complex task that requires convincing the hospital's managers of the benefits of these programs. Additionally, in the design and implementation of an ASP, antimicrobial stewardship (AS) leaders need tools for diverse purposes, such as measuring antimicrobial consumption, education and training and designing protocols. In this review we provide useful information for AS promoters to facilitate the task of designing and implementing an ASP. First, we summarize information about various institutions that promote AS and include evidence that supports the need for and benefits of these programs. Then, several campaigns promoting AS are described. Finally, online resources for professionals dealing with AS are briefly summarized. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Research safety vehicle program (Phase II) specification review. Volume II. Final technical report, Jul 1975--Nov 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pugliese, S.M.

1977-02-01

In Phase I of the Research Safety Vehicle Program (RSV), preliminary design and performance specifications were developed for a mid-1980's vehicle that integrates crashworthiness and occupant safety features with material resource conservation, economy, and producibility. Phase II of the program focused on development of the total vehicle design via systems engineering and integration analyses. As part of this effort, it was necessary to continuously review the Phase I recommended performance specification in relation to ongoing design/test activities. This document contains the results of analyses of the Phase I specifications. The RSV is expected to satisfy all of the producibility andmore » safety related specifications, i.e., handling and stability systems, crashworthiness, occupant protection, pedestrian/cyclist protection, etc.« less

Analysis of Space Coherent LIDAR Wind Mission

NASA Technical Reports Server (NTRS)

Spiers, Gary D.

1997-01-01

An evaluation of the performance of a coherent Doppler lidar proposed by a team comprising the NASA Marshall Space Flight Center, Lockheed Martin Space Company, University of Wisconsin and Los Alamos National Laboratory to NASA's Earth System Science Pathfinder (ESSP) program was performed. The design went through several iterations and only the performance of the final design is summarized here.

Design of a Computer-Controlled, Random-Access Slide Projector Interface. Final Report (April 1974 - November 1974).

ERIC Educational Resources Information Center

Kirby, Paul J.; And Others

The design, development, test, and evaluation of an electronic hardware device interfacing a commercially available slide projector with a plasma panel computer terminal is reported. The interface device allows an instructional computer program to select slides for viewing based upon the lesson student situation parameters of the instructional…

The Development of Mediated Training Programs for Workers with the Handicapped. Final Report.

ERIC Educational Resources Information Center

Henderson, Hyrum S.

The effectiveness of two courses designed to train 96 regular classroom teachers in rural areas to teach mildly handicapped children in their classrooms was examined. The courses covered teaching methods and materials and included self instructional materials. A posttest only control group design was employed. Data were collected on four measures:…

Technical Assistance and Training from the Document Design Project. Final Report.

ERIC Educational Resources Information Center

American Institutes for Research, Washington, DC.

Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

Innovations: The Social Consequences of Science and Technology. Final Evaluation Report.

ERIC Educational Resources Information Center

Tolman, Richard R.

The Biological Sciences Curriculum Study designed, developed, and field-tested a series of nine curriculum resource units for a semester program called "Innovations: The Social Consequences of Science and Technology (IST)." The units were designed for use by students and teachers in the 11th and 12th grades and at the junior college…

A study of space station needs, attributes and architectural options. Final briefing: Cost working group discussion session

NASA Technical Reports Server (NTRS)

1983-01-01

The economic factors involved in the design and utilization of the space station are investigated. Topics include the economic benefits associated with research and production, the orbit transfer vehicle, and satellite servicing. Program costs and design options are examined. The possibilities of financing from the private sector are discussed.

78 FR 42823 - Patient Protection and Affordable Care Act; Exchange Functions: Standards for Navigators and Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

...This final rule addresses various requirements applicable to Navigators and non-Navigator assistance personnel in Federally- facilitated Exchanges, including State Partnership Exchanges, and to non-Navigator assistance personnel in State Exchanges that are funded through federal Exchange Establishment grants. It finalizes the requirement that Exchanges must have a certified application counselor program. It creates conflict-of-interest, training and certification, and meaningful access standards; clarifies that any licensing, certification, or other standards prescribed by a state or Exchange must not prevent application of the provisions of title I of the Affordable Care Act; adds entities with relationships to issuers of stop loss insurance to the list of entities that are ineligible to become Navigators; and clarifies that the same ineligibility criteria that apply to Navigators apply to certain non-Navigator assistance personnel. The final rule also directs that each Exchange designate organizations which will then certify their staff members and volunteers to be application counselors that assist consumers and facilitate enrollment in qualified health plans and insurance affordability programs, and provides standards for that designation.

NASA's Space Environments and Effects Program: Technology for the New Millennium

NASA Technical Reports Server (NTRS)

Hardage, Donna M.; Pearson, Steven D.

2000-01-01

Current trends in spacecraft development include the use of advanced technologies while maintaining the "faster, better, cheaper" philosophy. Spacecraft designers are continually designing with smaller and faster electronics as well as lighter and thinner materials providing better performance, lower weight, and ultimately lower costs. Given this technology trend, spacecraft will become increasingly susceptible to the harsh space environments, causing damaging or even disabling effects on space systems. NASA's Space Environments and Effects (SEE) Program defines the space environments and provides advanced technology development to support the design, development, and operation of spacecraft systems that will accommodate or mitigate effects due to the harsh space environments. This Program provides a comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this multitudinous information is properly maintained and inserted into spacecraft design programs. A description of the SEE Program, its accomplishments, and future activities is provided.

Computer-Aided Construction at Designing Reinforced Concrete Columns as Per Ec

NASA Astrophysics Data System (ADS)

Zielińska, M.; Grębowski, K.

2015-02-01

The article presents the authors' computer program for designing and dimensioning columns in reinforced concrete structures taking into account phenomena affecting their behaviour and information referring to design as per EC. The computer program was developed with the use of C++ programming language. The program guides the user through particular dimensioning stages: from introducing basic data such as dimensions, concrete class, reinforcing steel class and forces affecting the column, through calculating the creep coefficient taking into account the impact of imperfection depending on the support scheme and also the number of mating members at load shit, buckling length, to generating the interaction curve graph. The final result of calculations provides two dependence points calculated as per methods of nominal stiffness and nominal curvature. The location of those points relative to the limit curve determines whether the column load capacity is assured or has been exceeded. The content of the study describes in detail the operation of the computer program and the methodology and phenomena which are indispensable at designing axially and eccentrically the compressed members of reinforced concrete structures as per the European standards.

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. Herk; Poerschke, A.; Beach, R.

In 2012-2013, IBACOS worked with a builder, Brookfield Homes in Denver, Colorado, to design and construct a Passive House certified model home. IBACOS used several modeling programs and calculation methods to complete the final design package along with Brookfield's architect KGA Studio. This design package included upgrades to the thermal enclosure, basement insulation, windows, and heating, ventilation, and air conditioning. Short-term performance testing in the Passive House was done during construction and after construction.

NASA/USRA advanced design program

NASA Technical Reports Server (NTRS)

1992-01-01

This report analyzes and presents a preliminary design for an experimental hypersonic vehicle. This plane will have a cruise speed of Mach 12 for one minute at an altitude of 120,000 feet. The major design areas of aerodynamics, propulsion, and weights are discussed in depth. An elementary analysis of thermal protection, trajectory, and cost is also presented. Finally, a discussion of future plans and recommendations is given, and overall conclusions are drawn.

Proceedings of the Ninth Annual Summer Conference: NASA/USRA University Advanced Aeronautics Design Program and Advanced Space Design Program

NASA Technical Reports Server (NTRS)

1993-01-01

The NASA/USRA University Advanced Design Program was established in 1984 as an attempt to add more and better design education to primarily undergraduate engineering programs. The original focus of the pilot program encompassing nine universities and five NASA centers was on space design. Two years later, the program was expanded to include aeronautics design with six universities and three NASA centers participating. This year marks the last of a three-year cycle of participation by forty-one universities, eight NASA centers, and one industry participant. The Advanced Space Design Program offers universities an opportunity to plan and design missions and hardware that would be of usc in the future as NASA enters a new era of exploration and discovery, while the Advanced Aeronautics Design Program generally offers opportunities for study of design problems closer to the present time, ranging from small, slow-speed vehicles to large, supersonic and hypersonic passenger transports. The systems approach to the design problem is emphasized in both the space and aeronautics projects. The student teams pursue the chosen problem during their senior year in a one- or two-semester capstone design course and submit a comprehensive written report at the conclusion of the project. Finally, student representatives from each of the universities summarize their work in oral presentations at the Annual Summer Conference, sponsored by one of the NASA centers and attended by the university faculty, NASA and USRA personnel and aerospace industry representatives. As the Advanced Design Program has grown in size, it has also matured in terms of the quality of the student projects. The present volume represents the student work accomplished during the 1992-1993 academic year reported at the Ninth Annual Summer Conference hosted by NASA Lyndon B. Johnson Space Center, June 14-18, 1993.

NASA/MOD Operations Impacts from Shuttle Program

NASA Technical Reports Server (NTRS)

Fitzpatrick, Michael; Mattes, Gregory; Grabois, Michael; Griffith, Holly

2011-01-01

Operations plays a pivotal role in the success of any human spaceflight program. This paper will highlight some of the core tenets of spaceflight operations from a systems perspective and use several examples from the Space Shuttle Program to highlight where the success and safety of a mission can hinge upon the preparedness and competency of the operations team. Further, awareness of the types of operations scenarios and impacts that can arise during human crewed space missions can help inform design and mission planning decisions long before a vehicle gets into orbit. A strong operations team is crucial to the development of future programs; capturing the lessons learned from the successes and failures of a past program will allow for safer, more efficient, and better designed programs in the future. No matter how well a vehicle is designed and constructed, there are always unexpected events or failures that occur during space flight missions. Preparation, training, real-time execution, and troubleshooting are skills and values of the Mission Operations Directorate (MOD) flight controller; these operational standards have proven invaluable to the Space Shuttle Program. Understanding and mastery of these same skills will be required of any operations team as technology advances and new vehicles are developed. This paper will focus on individual Space Shuttle mission case studies where specific operational skills, techniques, and preparedness allowed for mission safety and success. It will detail the events leading up to the scenario or failure, how the operations team identified and dealt with the failure and its downstream impacts. The various options for real-time troubleshooting will be discussed along with the operations team final recommendation, execution, and outcome. Finally, the lessons learned will be summarized along with an explanation of how these lessons were used to improve the operational preparedness of future flight control teams.

Research Project in Vocational Education Conducted under Part C of Public Law 90-576. Final Report.

ERIC Educational Resources Information Center

Hooper, William F.

A career education program was designed for the disadvantaged youth in Leflore County, Mississippi, to be incorporated into the curriculum and supported with a guidance and counseling program (including job placement). At all grade levels, attempts were made to help the children become aware of themselves and others, develop a positive attitude…

Applications of Advanced Experimental Methodologies to AWAVS Training Research. Final Report, May 1977-July 1978.

ERIC Educational Resources Information Center

Simon, Charles W.

A major part of the Naval Training Equipment Center's Aviation Wide Angle Visual System (AWAVS) program involves behavioral research to provide a basis for establishing design criteria for flight trainers. As part of the task of defining the purpose and approach of this program, the applications of advanced experimental methods are explained and…

A Model Vocational High Technology in Health Care Demonstration Project. Final Performance Report.

ERIC Educational Resources Information Center

Valencia Community Coll., Orlando, FL.

A unique training program in high tech obstetrical, neonatal, and pediatric nursing care areas was designed to be offered on site at Orlando (Florida) Regional Medical/Arnold Palmer Hospital for Children and Women. The training program offered 16 different courses to 355 employees over the 18-month period of the project. A needs assessment was…

The Capstone Sales Course: An Integral Part of a University Level Professional Selling Program

ERIC Educational Resources Information Center

Titus, David; Harris, Garth; Gulati, Rajesh; Bristow, Dennis

2017-01-01

The Capstone Sales course is the final in a sequence of five required courses in a 15 credit Professional Selling program housed in the Marketing Department at St. Cloud State University. The course is heavily focused on experiential learning activities for senior-level sales students. In this paper details of the course design, instructor and…

Secretary's Discretionary Program: Planning Grant To Develop Teacher Incentive Projects. Final Report. Support for Innovative Teacher Projects.

ERIC Educational Resources Information Center

Gittman, Elizabeth; Gottlieb, Karen

Support for Innovative Teacher Projects was a 12-month program implemented by the Board of Cooperative Education Services (BOCES) of Nassau County, New York, designed to encourage and assist teachers in developing innovative projects in priority areas and in applying for funding. In collaboration with a university school of education, the project…

Local Evaluation of Programs Funded under the Drug-Free Schools and Communities Act. Final Report.

ERIC Educational Resources Information Center

Tashjian, Michael D.; Elliott, Barbara

In September 1993 the U.S. Department of Education (ED) released a handbook to assist school- and community-based practitioners in designing and conducting evaluations of drug- and violence-prevention programs funded under the Drug Free Schools and Communities Act (DFSCA). A study was undertaken to assess the level of customer satisfaction with…

Financing and Sustaining Mobility Programs in Rural Areas: A Manual. Final Report.

ERIC Educational Resources Information Center

Wallin, Theodore A.; Kidder, Alice

This manual focuses on the start-up and operation of low-cost transportation in rural areas. A principal focus is the use of volunteers and/or the consolidation of rides through a brokerage program. Chapter One provides an overview of what financial and operating decisions must be made to design a volunteer system. Chapter Two describes easy…

Health Care Mentors: A Work-Based Approach to Developing the Health Care Workforce of Tomorrow. [Fourth Edition]. Career Exploration.

ERIC Educational Resources Information Center

GMS Partners, Inc. Silver Spring, MD.

Designed as the final step in a carefully articulated work-readiness program, Mentors provides students interested in health care careers with an opportunity to develop superior employability skills, while striking a balance between work and school. The Mentors program links the school community, the student, and host organizations in a mutually…

Creating Online Content with Real World Application by Designing and Implementing Online Practicums for Virtual and Physical Environments

ERIC Educational Resources Information Center

Barrett, Bob

2012-01-01

Universities need to assess student learning in order to determine if they are reaching the needs of the students, linking learning to course objectives, and determining if their courses have academic rigor. While many courses focus on the immediate course learning objectives, the use of final program projects and program assessments are becoming…

Review and Evaluation of Current Training Programs Found in Various Mining Environments. Final Report. Volume I, Summary.

ERIC Educational Resources Information Center

Adkins, John; And Others

A project was designed to produce a broad description of current mining training programs and to evaluate their effectiveness with respect to reducing mine injuries. The research strategy was built on the ranking of mines according to the effectiveness of their training with an effective training effort being defined as that training which is…

To Determine the Effectiveness of Board Game Simulations in the Grade Five Social Studies Program. Final Report 80-7.

ERIC Educational Resources Information Center

Green, Vicki A.

The report describes a study designed to ascertain the effectiveness of 12 board game simulations developed and used in a fifth grade Canadian history program. Questions examined include: 1) Does the use of board game simulations increase group participation and cultural, environmental, and historical awareness? 2) Does use of the games promote…

Adaptive smart wing design for military aircraft: requirements, concepts, and payoffs

NASA Astrophysics Data System (ADS)

Kudva, Jayanth N.; Appa, Kari; Van Way, Craig B.; Lockyer, Allen J.

1995-05-01

New developments in smart structures and materials have made it possible to revisit earlier work in adaptive and flexible wing technology, and remove some of the limitations for technology transition to next-generation aircraft. Research performed by Northrop Grumman, under internal funding, has led to a new program sponsored by ARPA to investigate the application of smart structures and materials technologies to twist and adapt and aircraft wing. Conceptual designs are presented based on state-of-the-art materials, including shape memory alloys, piezoelectrics, and fiber optic sensors for incorporation in a proposed smart wing design. Plans are described to demonstrate proof-of-concept on a prototype 1/10 scale -18 model that will be tested in a wind tunnel for final validation. Highlights of the proposed program are summarized with respect to program objectives, requirements, key concept design features, demonstration testing, and smart wing technology payoffs and risks.

Tritium glovebox stripper system seismic design evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grinnell, J. J.; Klein, J. E.

2015-09-01

The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological dosesmore » to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.« less

FINAL DESIGN REVIEW REPORT Subcritical Experiments Gen 2, 3-ft Confinement Vessel Weldment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romero, Christopher

A Final Design Review (FDR) of the Subcritical Experiments (SCE) Gen 2, 3-ft. Confinement Vessel Weldment was held at Los Alamos National Laboratory (LANL) on September 14, 2017. The review was a focused review on changes only to the confinement vessel weldment (versus a system design review). The changes resulted from lessons-learned in fabricating and inspecting the current set of confinement vessels used for the SCE Program. The baseline 3-ft. confinement vessel weldment design has successfully been used (to date) for three (3) high explosive (HE) over-tests, two (2) fragment tests, and five (5) integral HE experiments. The design teammore » applied lessons learned from fabrication and inspection of these vessel weldments to enhance fit-up, weldability, inspection, and fitness for service evaluations. The review team consisted of five (5) independent subject matter experts with engineering design, analysis, testing, fabrication, and inspection experience. The« less

Citizens Utilities Company's successful residential new construction market transformation program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caulfield, T.O.; Shepherd, M.A.

1998-07-01

Citizens Utilities Company, Arizona Electric Division (CUC/AED) fielded a Residential New Construction Program (RNC) in the forth quarter of 1994 that had been designed from conception as a market transformation program. The CUC RNC Program encouraged builders to adopt energy efficient building practices for new homes by supplying builders estimates of energy savings, supplying inspections services to assist builders in applying energy efficient building practices while verifying compliance, and posting and promoting the home as energy efficient during the sales period. Measures generally required to qualify for the program were R-38 ceiling insulation, R-21 wall insulation, polysealing of all infiltrationmore » gaps during construction, well sealed air-conditioning ducts, and an air conditioner Seasonal Energy Efficiency Rating (SEER) of 11.0 or greater. In less than two years the program achieved over 17% market penetration without offering rebates to builders. This paper reviews the design of the program, including a discussion of the features felt to be primarily responsible for its success. It reviews the levels of penetration achieved, free-ridership, spillover, and market barriers encountered. Finally it proposes improvements to the program designed to carry it the next step toward a self-sustaining market transformation program.« less

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

A spacecraft computer repairable via command.

NASA Technical Reports Server (NTRS)

Fimmel, R. O.; Baker, T. E.

1971-01-01

The MULTIPAC is a central data system developed for deep-space probes with the distinctive feature that it may be repaired during flight via command and telemetry links by reprogramming around the failed unit. The computer organization uses pools of identical modules which the program organizes into one or more computers called processors. The interaction of these modules is dynamically controlled by the program rather than hardware. In the event of a failure, new programs are entered which reorganize the central data system with a somewhat reduced total processing capability aboard the spacecraft. Emphasis is placed on the evolution of the system architecture and the final overall system design rather than the specific logic design.

77 FR 55105 - Aging Airplane Program: Widespread Fatigue Damage; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... final rule published November 15, 2010. The final rule required design approval holders of certain... compliance dates of Sec. Sec. 26.21, 121.1115, and 129.115 for Airbus A310 and A300-600 series airplanes... A300 B4-203 30 34,000 FC A300-600 Series 60 30,000 FC/67,500 FH A310-200 Series 60 40,000 FC/60,000 FH...

Interactive Peer Coaching/Mentoring Project for Preparing Teachers of Students with Severe Behavioral Disorders Final Report. Volume 1: Project Narrative and Briefing Papers [and] Volume 2: Appendices.

ERIC Educational Resources Information Center

North Dakota Center for Persons with Disabilities, Minot.

This final report discusses the activities and outcomes of the Interactive Peer Coaching/Mentoring (IPCM) Project, a program designed to prepare teachers of students with severe behavioral disorders (SED) residing in a rural, remote area in North Dakota. The IPCM project was conducted from July 1997 through July 2000 and developed an…

Project PEGS! Practices in Effective Guidance Strategies: Interactive CD-ROM Series for Educators To Practice Positive Behavior Management Skills, October 1, 1999-December 30, 2002. Final Performance Report.

ERIC Educational Resources Information Center

Quirk, Constance A.

This final report describes the activities and outcomes of a federally funded project designed to produce and field-test two computer-based interactive CD-ROMs: "PEGS! for Preschool" and "PEGS! for Secondary School". These programs, in a game format, provide beginning general and special educators with independent practice in…

A multi-objective optimization model for hub network design under uncertainty: An inexact rough-interval fuzzy approach

NASA Astrophysics Data System (ADS)

Niakan, F.; Vahdani, B.; Mohammadi, M.

2015-12-01

This article proposes a multi-objective mixed-integer model to optimize the location of hubs within a hub network design problem under uncertainty. The considered objectives include minimizing the maximum accumulated travel time, minimizing the total costs including transportation, fuel consumption and greenhouse emissions costs, and finally maximizing the minimum service reliability. In the proposed model, it is assumed that for connecting two nodes, there are several types of arc in which their capacity, transportation mode, travel time, and transportation and construction costs are different. Moreover, in this model, determining the capacity of the hubs is part of the decision-making procedure and balancing requirements are imposed on the network. To solve the model, a hybrid solution approach is utilized based on inexact programming, interval-valued fuzzy programming and rough interval programming. Furthermore, a hybrid multi-objective metaheuristic algorithm, namely multi-objective invasive weed optimization (MOIWO), is developed for the given problem. Finally, various computational experiments are carried out to assess the proposed model and solution approaches.

Application of Pi Preform Composite Joints in Fabrication of NASA Composite Crew Module Demonstration Structure

NASA Technical Reports Server (NTRS)

Higgins, John E.; Pelham, Larry

2008-01-01

This paper will describe unique and extensive use of pre-woven and impregnated pi cross-sections in fabrication of a carbon composite demonstration structure for the Composite Crew Module (CCM) Program. The program is managed by the NASA Safety and Engineering Center with participants from ten NASA Centers and AFRL. Multiple aerospace contractors are participating in the design development, tooling and fabrication effort as well. The goal of the program is to develop an agency wide design team for composite habitable spacecraft. The specific goals for this development project are: a) To gain hands on experience in design, building and testing a composite crew module. b) To validate key assumptions by resolving composite spacecraft design details through fabrication and testing of hardware. This paper will focus on the design and fabrication issues supporting selection of the Lockheed Martin patented Pi pre-form to provide sound composite joints a numerous locations in the structure. This abstract is based on Preliminary Design data. The final design will continue to evolve through the fall of 2007 with fabrication mostly completed by conference date.

Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies

NASA Technical Reports Server (NTRS)

Burge, G. W.; Blackmon, J. B.

1973-01-01

An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.

The Midden Mound Project. Report of Investigations Number 6

DTIC Science & Technology

1987-01-01

SUMAR OF THE RSEARCH DMIGN In the six and one-half years of this project, there have been tmo developmental stages or refinements of the research design ...character of the finished tool assemblage. The midden mound experimental program was designed , in part, to document the manufacturing strategies for...not have been the same during various prehistoric time periods and in the experimental design ; and, finally, sampling may be a problem. USE-WEAR

United States Air Force F-35A Operational Basing Environmental Impact Statement. Volume 1

DTIC Science & Technology

2013-09-01

Evaluation (FDE) program and Weapons School (WS) beddown, the F-22 designator was used. Subsequent testing , development, and deployment resulted in...Initial F-35A Operational Basing EIS Final, September 2013 contract to develop the JSF ( designated the F-35 Lightning II). Since then, testing of F...of the aircraft even with system failures. Throughout the design and testing process, safety initiatives took previous best practices for single

Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 3

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. This volume contains the drawings and specifications developed for the final design. This volume is divided into 5 books of which this is the third, containing drawings 47A380074 through 47A380126. A full breakdown parts listing is provided as well as a where used list.

Operational Design that Synthesizes Art and Science

DTIC Science & Technology

2011-05-04

FINAL 3. DATES COVERED (From - To) Feb - May 2011 4. TITLE AND SUBTITLE OPERATIONAL DESIGN THAT SYNTHESIZES ART AND SCIENCE 5a...TITLE AND SUBTITLE Operational Design That Synthesizes Art And Science 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR...proponents of EBO view warfare as only a science and not a combination of art and science . 9 Another main point of contention centered on the term

Institute for Home Economics Teachers on Initiating, Developing, and Evaluating Programs at the Post High School Level to Prepare Food Service Supervisors and Assistants to Directors of Child Care Services: Volume I: A Post High School Program in Home Economics (May 1, 1966-June 30, 1967). Final Report.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Coll. of Education.

The institute was designed to provide information and develop some ability in initiating, developing, and evaluating programs for training workers as food service supervisors in post-high school level programs. Organizational details, student and faculty qualifications, a job description and analysis of the food service supervisor occupation are…

Improving design phase evaluations for high pile rebound sites : final report.

DOT National Transportation Integrated Search

2016-05-31

A testing program performed to help determine typical soils properties encountered during pile installation when high rebound : occurs produced a decision matrix for geotechnical engineers. High pile rebound (HPR) occurred at numerous sites in Florid...

Design and Field Testing of a Systematic Procedure for Evaluating Vocational Programs. Final Report.

ERIC Educational Resources Information Center

Portland Public Schools, OR.

The purpose of a project was to design and field-test a system for evaluating the adequacy of the vocational curriculum utilized by the Vocational Village, an alternative school for the training of individuals who have experienced failure in other educational settings. Focus was on the development of an evaluation model which will assess the…

Advanced Simulation in Undergraduate Pilot Training: Automatic Instructional System. Final Report for the Period March 1971-January 1975.

ERIC Educational Resources Information Center

Faconti, Victor; Epps, Robert

The Advanced Simulator for Undergraduate Pilot Training (ASUPT) was designed to investigate the role of simulation in the future Undergraduate Pilot Training (UPT) program. The Automated Instructional System designed for the ASUPT simulator was described in this report. The development of the Automated Instructional System for ASUPT was based upon…

Case Analysis Of The Joint High Speed Vessel Program: Defense Acquisition

DTIC Science & Technology

2016-09-01

reviews resulted in a series of Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial...requirements into a final and unique materiel solution for a system capability that is fielded. 14. SUBJECT TERMS Advanced Concept and Technology ...Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial, high-speed, shallow-draft

NASA Ames Hosts Viewing Party for Final Shuttle Launch (Reporter Package)

NASA Image and Video Library

2011-07-12

The public was invited to NASA's Ames Research Center to observe a live televised broadcast of the final space shuttle launch on July 8, 2011. The STS-135 mission is the final flight of NASA's Space Shuttle Program. The orbiter Atlantis is carrying a system to investigate the potential for robotically refueling existing spacecraft and bring back a failed ammonia pump to help NASA better understand and improve pump designs for future systems. It also will deliver spare parts to sustain space station operations after the shuttles retire from service.

Development of a Pilot Career Cluster Curriculum for all Students in a College Preparatory Oriented High School. Final Report. Part I: Curriculum Development.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD.

In developing a program to assist the individual student to plan a goal-oriented program and increase his opportunities both to select courses moving him toward his personal goals and to use the community resources as supplemental educational experiences, the Winston Churchill High School designed a Career Cluster Curriculum Project, the first…

Evaluation of Program for Infant/Toddler Care (PITC): An On-Site Training of Caregivers. Final Report. NCEE 2012-4003

ERIC Educational Resources Information Center

Weinstock, Phyllis; Bos, Johannes; Tseng, Fannie; Rosenthal, Emily; Ortiz, Lorena; Dowsett, Chantelle; Huston, Aletha; Bentley, Alison

2012-01-01

Little research has been conducted on the effectiveness of training strategies for child care providers. The current study used an experimental intent-to-treat design to measure the impact of an established intervention, the on-site caregiver training component of the Program for Infant/Toddler Care (PITC), on child development and child care…

Design and Implementation of an Assessment Model for Students Entering Vocational Education Programs in the State of Colorado. Final Report.

ERIC Educational Resources Information Center

Hartley, Nancy K.; And Others

A project was conducted to develop materials that could be utilized by teachers for informal assessment of the needs of students in vocational programs. Sixteen modules were developed to help teachers identify some of the areas in which students have special learning needs, clarify various levels of abilities, and distinguish the different…

MAUD: An Interactive Computer Program for the Structuring, Decomposition, and Recomposition of Preferences between Multiattributed Alternatives. Final Report. Technical Report 543.

ERIC Educational Resources Information Center

Humphreys, Patrick; Wisudha, Ayleen

As a demonstration of the application of heuristic devices to decision-theoretical techniques, an interactive computer program known as MAUD (Multiattribute Utility Decomposition) has been designed to support decision or choice problems that can be decomposed into component factors, or to act as a tool for investigating the microstructure of a…

Technology for Analysis of Student Interactions With Complex Programs. Final Report for Period January 1972-February 1973.

ERIC Educational Resources Information Center

Lukas, George; Feurzeig, Wallace

A description is provided of a computer system designed to aid in the analysis of student programing work. The first section of the report consists of an overview and user's guide. In it, the system input is described in terms of a "dribble file" which records all student inputs generated; also an introduction is given to the aids…

Cargo Movement Operations System (CMOS) Final Software Design Document, Change 01, Increment I

DTIC Science & Technology

1991-03-22

NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDDl-0002 PROGRAM OFFICE...COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDDl-0003 PROGRAM OFFICE CONTROL NUMBER: DATA...CARMODE and SURRTG. RATIONALE: Request clarification of these deletions. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [

Cargo Movement Operations System (CMOS) Final System Segment Design Document Increment II, (ChaNge 02)

DTIC Science & Technology

1990-11-07

present, the documents are in conflict with each other. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION...NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] p ORIGINATOR CONTROL NUMBER: SSDD-0003 PROGRAM...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [1 ORIGINATOR CONTROL NUMBER: SSDD-0005 PROGRAM OFFICE

An Exploratory Analysis of Differential Program Costs of Selected Occupational Curricula in Selected Illinois Junior Colleges. Final Report.

ERIC Educational Resources Information Center

Tomlinson, Robert M.; Rzonca, Chester S.

This cost differential study was designed to use data collected by the Division of Vocational and Technical Education and the Illinois Junior College Board in an effort to analyze differential program costs of selected occupational curricula in six sample community colleges incurred in the fiscal year 1968-69. To be effective, a cost accounting…

Review and Evaluation of Current Training Programs Found in Various Mining Environments. Final Report. Volume II, Analysis and Recommendations.

ERIC Educational Resources Information Center

Adkins, John; And Others

A project was designed to produce a broad description of current mining training programs and to evaluate their effectiveness with respect to reducing mine injuries. Aggregate training and injury data were used to evaluate the overall training effort at 300 mines as well as specific efforts in 12 categories of training course objectives. From such…

District Awards for Teacher Excellence (D.A.T.E.) Program: Final Evaluation Report. [Executive Summary

ERIC Educational Resources Information Center

Springer, Matthew G.; Lewis, Jessica L.; Ehlert, Mark W.; Podgursky, Michael J.; Crader, Gary D.; Taylor, Lori L.; Gronberg, Timothy J.; Jansen, Dennis W.; Lopez, Omar S.; Stuit, David A.

2010-01-01

District Awards for Teacher Excellence (D.A.T.E.) is a state-funded program in Texas that provides grants to districts for the implementation of locally-designed incentive pay plans. All districts in the state are eligible to receive grants, but participation is voluntary. D.A.T.E. incentive pay plans were first implemented in Texas districts…

District Awards for Teacher Excellence (D.A.T.E.) Program: Final Evaluation Report. Policy Evaluation Report

ERIC Educational Resources Information Center

Springer, Matthew G.; Lewis, Jessica L.; Ehlert, Mark W.; Podgursky, Michael J.; Crader, Gary D.; Taylor, Lori L.; Gronberg, Timothy J.; Jansen, Dennis W.; Lopez, Omar S.; Stuit, David A.

2010-01-01

District Awards for Teacher Excellence (D.A.T.E.) is a state-funded program in Texas that provides grants to districts for the implementation of locally-designed incentive pay plans. All districts in the state are eligible to receive grants, but participation is voluntary. D.A.T.E. incentive pay plans were first implemented in Texas districts…

Industry to Education Technical Transfer Program & Composite Materials. Composite Materials Course. Fabrication I Course. Fabrication II Course. Composite Materials Testing Course. Final Report.

ERIC Educational Resources Information Center

Massuda, Rachel

These four reports provide details of projects to design and implement courses to be offered as requirements for the associate degree program in composites and reinforced plastics technology. The reports describe project activities that led to development of curricula for four courses: composite materials, composite materials fabrication I,…

Visualization design and verification of Ada tasking using timing diagrams

NASA Technical Reports Server (NTRS)

Vidale, R. F.; Szulewski, P. A.; Weiss, J. B.

1986-01-01

The use of timing diagrams is recommended in the design and testing of multi-task Ada programs. By displaying the task states vs. time, timing diagrams can portray the simultaneous threads of data flow and control which characterize tasking programs. This description of the system's dynamic behavior from conception to testing is a necessary adjunct to other graphical techniques, such as structure charts, which essentially give a static view of the system. A series of steps is recommended which incorporates timing diagrams into the design process. Finally, a description is provided of a prototype Ada Execution Analyzer (AEA) which automates the production of timing diagrams from VAX/Ada debugger output.

Programs for Testing Processor-in-Memory Computing Systems

NASA Technical Reports Server (NTRS)

Katz, Daniel S.

2006-01-01

The Multithreaded Microbenchmarks for Processor-In-Memory (PIM) Compilers, Simulators, and Hardware are computer programs arranged in a series for use in testing the performances of PIM computing systems, including compilers, simulators, and hardware. The programs at the beginning of the series test basic functionality; the programs at subsequent positions in the series test increasingly complex functionality. The programs are intended to be used while designing a PIM system, and can be used to verify that compilers, simulators, and hardware work correctly. The programs can also be used to enable designers of these system components to examine tradeoffs in implementation. Finally, these programs can be run on non-PIM hardware (either single-threaded or multithreaded) using the POSIX pthreads standard to verify that the benchmarks themselves operate correctly. [POSIX (Portable Operating System Interface for UNIX) is a set of standards that define how programs and operating systems interact with each other. pthreads is a library of pre-emptive thread routines that comply with one of the POSIX standards.

SPOT 4 space magnetic recorder mechanisms

NASA Technical Reports Server (NTRS)

Borrien, A.; Vialatoux, E.; Lhermet, J. L.; Didier, A.

1990-01-01

The design of the SPOT 4 satellite will be quite different from the previous ones. The design of the new magnetic tape recorder, which was derived from industrial knowledge and mission requirements; the main technical characteristics of the recorder; and the mechanical subsystems of the recorder and their locations and contributions to the final performance are all discussed. The philosophy of the development program, required to achieve the desired performance and reliability for each flight model, is described, and information on the schedule and current development is presented. The components of the tape plate system, (the transmission belts, tape rollers of the recorders, and reel hub ball bearings) which are subjected to heavy mechanical operation, fatigue, and wear in the thermal environment of the mission, are discussed. For each of the components, a description of its function in the recorder is given, as well as the mechanical stress imposed during the various operational phases. The quality testing program, which was used to verify the design safety margins, is described. Finally, the first test results of a functioning model of the flight system are presented.

Case study: Lockheed-Georgia Company integrated design process

NASA Technical Reports Server (NTRS)

Waldrop, C. T.

1980-01-01

A case study of the development of an Integrated Design Process is presented. The approach taken in preparing for the development of an integrated design process includes some of the IPAD approaches such as developing a Design Process Model, cataloging Technical Program Elements (TPE's), and examining data characteristics and interfaces between contiguous TPE's. The implementation plan is based on an incremental development of capabilities over a period of time with each step directed toward, and consistent with, the final architecture of a total integrated system. Because of time schedules and different computer hardware, this system will not be the same as the final IPAD release; however, many IPAD concepts will no doubt prove applicable as the best approach. Full advantage will be taken of the IPAD development experience. A scenario that could be typical for many companies, even outside the aerospace industry, in developing an integrated design process for an IPAD-type environment is represented.

Development and Field-Test of an Instrument to Assess the Extent to Which a Vocational Educational Program Is Either Competency-Based or Conventional. Final Report from September 1, 1984 to August 31, 1985.

ERIC Educational Resources Information Center

University of Central Florida, Orlando. Coll. of Education.

This report describes the production and pilot test of an assessment instrument for vocational education programs. The instrument was designed to be used following a site visit that includes a 30- to 45-minute interview with the program instructor and a 30-minute interview with one small group of students. Reliability and validity information was…

Magnitude error bounds for sampled-data frequency response obtained from the truncation of an infinite series, and compensator improvement program

NASA Technical Reports Server (NTRS)

Mitchell, J. R.

1972-01-01

The frequency response method of analyzing control system performance is discussed, and the difficulty of obtaining the sampled frequency response of the continuous system is considered. An upper bound magnitude error equation is obtained which yields reasonable estimates of the actual error. Finalization of the compensator improvement program is also reported, and the program was used to design compensators for Saturn 5/S1-C dry workshop and Saturn 5/S1-C Skylab.

Biomedical and Human Factors Requirements for a Manned Earth Orbiting Station

NASA Technical Reports Server (NTRS)

Helvey, W.; Martell, C.; Peters, J.; Rosenthal, G.; Benjamin, F.; Albright, G.

1964-01-01

The primary objective of this study is to determine which biomedical and human factors measurements must be made aboard a space station to assure adequate evaluation of the astronaut's health and performance during prolonged space flights. The study has employed, where possible, a medical and engineering systems analysis to define the pertinent life sciences and space station design parameters and their influence on a measurement program. The major areas requiring evaluation in meeting the study objectives include a definition of the space environment, man's response to the environment, selection of measurement and data management techniques, experimental program, space station design requirements, and a trade-off analysis with final recommendations. The space environment factors that are believed to have a significant effect on man were evaluated. This includes those factors characteristic of the space environment (e. g. weightlessness, radiation) as well as those created within the space station (e. g. toxic contaminants, capsule atmosphere). After establishing the general features of the environment, an appraisal was made of the anticipated response of the astronaut to each of these factors. For thoroughness, the major organ systems and functions of the body were delineated, and a determination was made of their anticipated response to each of the environmental categories. A judgment was then made on the medical significance or importance of each response, which enabled a determination of which physiological and psychological effects should be monitored. Concurrently, an extensive list of measurement techniques and methods of data management was evaluated for applicability to the space station program. The various space station configurations and design parameters were defined in terms of the biomedical and human factors requirements to provide the measurements program. Research design of experimental programs for various station configurations, mission durations, and crew sizes were prepared, and, finally, a trade-off analysis of the critical variables in the station planning was completed with recommendations to enhance the confidence in the measurement program.

Experiment module concepts study. Volume 3: Module and subsystem design

NASA Technical Reports Server (NTRS)

Hunter, J. R.; Chiarappa, D. J.

1970-01-01

The final common module set exhibiting wide commonality is described. The set consists of three types of modules: one free flying module and two modules that operate attached to the space station. The common module designs provide for the experiment program as defined. The feasibility, economy, and practicality of these modules hinges on factors that do not affect the approach or results of the commonality process, but are important to the validity of the common module concepts. Implementation of the total experiment program requires thirteen common modules: five CM-1, five CM-3, and three CM-4 modules.

Development of a thermionic magnicon amplifier at 11.4 GHz. Final report for period May 16, 1995 - May 15, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gold, Steven H.; Fliflet, Arne W.

2001-08-25

This is the final report on the research program ''Development of a Thermionic Magnicon Amplifier at 11.4 GHz,'' which was carried out by the Plasma Physics Division of the Naval Research Laboratory. Its goal was to develop a high-power, frequency-doubling X-band magnicon amplifier, an advanced scanning-beam amplifier, for use in future linear colliders. The final design parameters were 61 MW at 11.424 GHz, 59 dB gain, 59% efficiency, 1 microsecond pulselength and 10 Hz repetition rate. At the conclusion of this program, the magnicon was undergoing high-power conditioning, having already demonstrated high-power operation, phase stability, a linear drive curve, amore » small operational frequency bandwidth and a spectrally pure, single-mode output.« less

PRA (Probabilistic Risk Assessments) Participation versus Validation

NASA Technical Reports Server (NTRS)

DeMott, Diana; Banke, Richard

2013-01-01

Probabilistic Risk Assessments (PRAs) are performed for projects or programs where the consequences of failure are highly undesirable. PRAs primarily address the level of risk those projects or programs posed during operations. PRAs are often developed after the design has been completed. Design and operational details used to develop models include approved and accepted design information regarding equipment, components, systems and failure data. This methodology basically validates the risk parameters of the project or system design. For high risk or high dollar projects, using PRA methodologies during the design process provides new opportunities to influence the design early in the project life cycle to identify, eliminate or mitigate potential risks. Identifying risk drivers before the design has been set allows the design engineers to understand the inherent risk of their current design and consider potential risk mitigation changes. This can become an iterative process where the PRA model can be used to determine if the mitigation technique is effective in reducing risk. This can result in more efficient and cost effective design changes. PRA methodology can be used to assess the risk of design alternatives and can demonstrate how major design changes or program modifications impact the overall program or project risk. PRA has been used for the last two decades to validate risk predictions and acceptability. Providing risk information which can positively influence final system and equipment design the PRA tool can also participate in design development, providing a safe and cost effective product.

Active vibration control testing of the SPICES program: final demonstration article

NASA Astrophysics Data System (ADS)

Dunne, James P.; Jacobs, Jack H.

1996-05-01

The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

Challenges and Opportunities for an ITS Intermodal Freight Program

DOT National Transportation Integrated Search

1999-02-01

This final report was developed as part of the project, "ITS/Intermodal Freight Design for Operational Tests." The objective of the project was to develop a plan for conducting field operational tests to facilitate movement of intermodal freight in t...

Challenges And Opportunities For An ITS/Intermodal Freight Program

DOT National Transportation Integrated Search

1999-02-01

This final report was developed as part of the project, "ITS/Intermodal Freight Design for Operational Tests". The objective of the project was to develop a plan for conducting field operational tests to facilitate movement of intermodal freight in t...

Warrants, design, and safety of road ranger service patrols : draft final report.

DOT National Transportation Integrated Search

2016-11-01

This research project created a decision support system for managers who must decide if a roadway warrants the addition of the Safety Service Patrol (SSP). Meetings with Florida Department of Transportation (FDOT) service patrol program manager...

Design and Testing of CPAS Main Deployment Bag Energy Modulator

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2017-01-01

During the developmental testing program for CPAS (Capsule Parachute Assembly System), the parachute system for the NASA Orion Crew Module, simulation revealed that high loads may be experienced by the pilot risers during the most devere deployment conditions. As the role of the pilot parachutes is to deploy the main parachutes, these high loads introduced the possibility of main deployment failure. In order to mitigate these high loads, a set of energy modulators was incorporated between the pilot riser and the main deployment bag. An extensive developmental program was implemented to ensure the adequacy of these energy modulators. After initial design comparisons, the energy modulator design was validated through slow-speed joint tests as well as through high-speed bungee tests. This paper documents the design, development, and results of multiple tests completed on the final design.

Advanced very high resolution radiometer

NASA Technical Reports Server (NTRS)

1978-01-01

The program covered the design, construction, and test of a Breadboard Model, Engineering Model, Protoflight Model, Mechanical/Structural Model, and a Life Test Model. Special bench test and calibration equipment was also developed for use on the program. Initially, the instrument was to operate from a 906 n.mi. orbit and be thermally isolated from the spacecraft. The Breadboard Model and the Mechanical/Structural Model were designed and built to these requirements. The spacecraft altitude was changed to 450 n.mi., IFOVs and spectral characteristics were modified, and spacecraft interfaces were changed. The final spacecraft design provided a temperature-controlled Instrument Mounting Platform (IMP) to carry the AVHRR and other instruments. The design of the AVHRR was modified to these new requirements and the modifications were incorporated in the Engineering Model. The Protoflight Model and the Flight Models conform to this design.

Large-scale structural optimization

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.

1983-01-01

Problems encountered by aerospace designers in attempting to optimize whole aircraft are discussed, along with possible solutions. Large scale optimization, as opposed to component-by-component optimization, is hindered by computational costs, software inflexibility, concentration on a single, rather than trade-off, design methodology and the incompatibility of large-scale optimization with single program, single computer methods. The software problem can be approached by placing the full analysis outside of the optimization loop. Full analysis is then performed only periodically. Problem-dependent software can be removed from the generic code using a systems programming technique, and then embody the definitions of design variables, objective function and design constraints. Trade-off algorithms can be used at the design points to obtain quantitative answers. Finally, decomposing the large-scale problem into independent subproblems allows systematic optimization of the problems by an organization of people and machines.

Programs for Children with Specific Learning Disabilities. P.L. 91-230, Title VI-G. Final Report on Products and Results of Year's Work, July 1, 1973 to June 30, 1974. Fail Save Continuum.

ERIC Educational Resources Information Center

1974

Presented is the final report of the Learning Disability Fail-Save Continuum Project, designed to provide identification, assessment, and placement services to 378 elementary and secondary level students. Outlined in Section I are the following project components: major revisions from the original proposal (such as implementation of the itinerant…

Testing of Twin Linear Aerospike XRS-2200 Engine

NASA Technical Reports Server (NTRS)

2001-01-01

The test of twin Linear Aerospike XRS-2200 engines, originally built for the X-33 program, was performed on August 6, 2001 at NASA's Sternis Space Center, Mississippi. The engines were fired for the planned 90 seconds and reached a planned maximum power of 85 percent. NASA's Second Generation Reusable Launch Vehicle Program , also known as the Space Launch Initiative (SLI), is making advances in propulsion technology with this third and final successful engine hot fire, designed to test electro-mechanical actuators. Information learned from this hot fire test series about new electro-mechanical actuator technology, which controls the flow of propellants in rocket engines, could provide key advancements for the propulsion systems for future spacecraft. The Second Generation Reusable Launch Vehicle Program, led by NASA's Marshall Space Flight Center in Huntsville, Alabama, is a technology development program designed to increase safety and reliability while reducing costs for space travel. The X-33 program was cancelled in March 2001.

Research Technology

NASA Image and Video Library

2001-08-06

The test of twin Linear Aerospike XRS-2200 engines, originally built for the X-33 program, was performed on August 6, 2001 at NASA's Sternis Space Center, Mississippi. The engines were fired for the planned 90 seconds and reached a planned maximum power of 85 percent. NASA's Second Generation Reusable Launch Vehicle Program , also known as the Space Launch Initiative (SLI), is making advances in propulsion technology with this third and final successful engine hot fire, designed to test electro-mechanical actuators. Information learned from this hot fire test series about new electro-mechanical actuator technology, which controls the flow of propellants in rocket engines, could provide key advancements for the propulsion systems for future spacecraft. The Second Generation Reusable Launch Vehicle Program, led by NASA's Marshall Space Flight Center in Huntsville, Alabama, is a technology development program designed to increase safety and reliability while reducing costs for space travel. The X-33 program was cancelled in March 2001.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus

DTIC Science & Technology

2011-01-01

20Handbook%20FINAL%20w%20 Covers%202-11-10.pdf Daft , Richard L., Organization Theory and Design , 6th ed., Cincinnati, Ohio: South-Western College... organizations is focused not simply on program improve- ment but on broader organizational improvement as well. Thus, eval- uations are designed and...strategic tool designed to assist its parent organization in achieving its mission by conducting activi- ties that foster individual and organizational

Army-NASA aircrew/aircraft integration program. Phase 5: A3I Man-Machine Integration Design and Analysis System (MIDAS) software concept document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Neukom, Christian; Nishimura, Sayuri; Prevost, Michael; Shankar, Renuka; Staveland, Lowell; Smith, Greg

1992-01-01

This is the Software Concept Document for the Man-machine Integration Design and Analysis System (MIDAS) being developed as part of Phase V of the Army-NASA Aircrew/Aircraft Integration (A3I) Progam. The approach taken in this program since its inception in 1984 is that of incremental development with clearly defined phases. Phase 1 began in 1984 and subsequent phases have progressed at approximately 10-16 month intervals. Each phase of development consists of planning, setting requirements, preliminary design, detailed design, implementation, testing, demonstration and documentation. Phase 5 began with an off-site planning meeting in November, 1990. It is expected that Phase 5 development will be complete and ready for demonstration to invited visitors from industry, government and academia in May, 1992. This document, produced during the preliminary design period of Phase 5, is intended to record the top level design concept for MIDAS as it is currently conceived. This document has two main objectives: (1) to inform interested readers of the goals of the MIDAS Phase 5 development period, and (2) to serve as the initial version of the MIDAS design document which will be continuously updated as the design evolves. Since this document is written fairly early in the design period, many design issues still remain unresolved. Some of the unresolved issues are mentioned later in this document in the sections on specific components. Readers are cautioned that this is not a final design document and that, as the design of MIDAS matures, some of the design ideas recorded in this document will change. The final design will be documented in a detailed design document published after the demonstrations.

Information Engineering and Workflow Design in a Clinical Decision Support System for Colorectal Cancer Screening in Iran.

PubMed

Maserat, Elham; Seied Farajollah, Seiede Sedigheh; Safdari, Reza; Ghazisaeedi, Marjan; Aghdaei, Hamid Asadzadeh; Zali, Mohammad Reza

2015-01-01

Colorectal cancer is a major cause of morbidity and mortality throughout the world. Colorectal cancer screening is an optimal way for reducing of morbidity and mortality and a clinical decision support system (CDSS) plays an important role in predicting success of screening processes. DSS is a computer-based information system that improves the delivery of preventive care services. The aim of this article was to detail engineering of information requirements and work flow design of CDSS for a colorectal cancer screening program. In the first stage a screening minimum data set was determined. Developed and developing countries were analyzed for identifying this data set. Then information deficiencies and gaps were determined by check list. The second stage was a qualitative survey with a semi-structured interview as the study tool. A total of 15 users and stakeholders' perspectives about workflow of CDSS were studied. Finally workflow of DSS of control program was designed by standard clinical practice guidelines and perspectives. Screening minimum data set of national colorectal cancer screening program was defined in five sections, including colonoscopy data set, surgery, pathology, genetics and pedigree data set. Deficiencies and information gaps were analyzed. Then we designed a work process standard of screening. Finally workflow of DSS and entry stage were determined. A CDSS facilitates complex decision making for screening and has key roles in designing optimal interactions between colonoscopy, pathology and laboratory departments. Also workflow analysis is useful to identify data reconciliation strategies to address documentation gaps. Following recommendations of CDSS should improve quality of colorectal cancer screening.

An application of programmatic assessment for learning (PAL) system for general practice training.

PubMed

Schuwirth, Lambert; Valentine, Nyoli; Dilena, Paul

2017-01-01

Aim: Programmatic assessment for learning (PAL) is becoming more and more popular as a concept but its implementation is not without problems. In this paper we describe the design principles behind a PAL program in a general practice training context. Design principles: The PAL program was designed to optimise the meaningfulness of assessment information for the registrar and to make him/her use that information to self regulate their learning. The main principles in the program were cognitivist and transformative. The main cognitive principles we used were fostering the understanding of deep structures and stimulating transfer by making registrars constantly connect practice experiences with background knowledge. Ericsson's deliberate practice approach was built in with regard to the provision of feedback combined with Pintrich's model of self regulation. Mezirow's transformative learning and insights from social network theory on collaborative learning were used to support the registrars in their development to become GP professionals. Finally the principal of test enhanced learning was optimised. Epilogue: We have provided this example explain the design decisions behind our program, but not want to present our program as the solution to any given situation.

Digital Avionics Information System (DAIS): Life Cycle Cost Impact Modeling System (LCCIM)--A Managerial Overview. Final Report.

ERIC Educational Resources Information Center

Goclowski, John C.; Baran, H. Anthony

This report gives a managerial overview of the Life Cycle Cost Impact Modeling System (LCCIM), which was designed to provide the Air Force with an in-house capability of assessing the life cycle cost impact of weapon system design alternatives. LCCIM consists of computer programs and the analyses which the user must perform to generate input data.…

Limited Scope Design Study for Multi-Sensor Towbody

DTIC Science & Technology

2016-06-01

FINAL REPORT Limited Scope Design Study for Multi-Sensor Towbody SERDP Project MR-2501 JUNE 2016 Dr. Kevin Williams Tim McGinnis...prepared under contract to the Department of Defense Strategic Environmental Research and Development Program (SERDP). The publication of this...Left Blank REPORT DOCUMENTATION PAGE Standard Form 298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 Form Approved OMB No. 0704-0188 The public

A Comparison of Two Teaching Methodologies for a Course in Basic Reference. Final Report.

ERIC Educational Resources Information Center

Gothberg, Helen M.

The purpose of the investigation was to develop and test an audio-tutorial program for a course in Basic Reference. The design of the investigation was a posttest-only-control group design with 63 students randomly assigned to either an audio-tutorial or a lecture group. Data were collected and analyzed using a t-test for two groups and four…

A Design Architecture for an Integrated Training System Decision Support System

DTIC Science & Technology

1990-07-01

Sensory modes include visual, auditory, tactile, or kinesthetic; performance categories include time to complete , speed of response, or correct action ...procedures, and finally application and examples from the aviation proponency with emphasis on the LHX program. Appendix B is a complete bibliography...integrated analysis of ITS development. The approach was designed to provide an accurate and complete representation of the ITS development process and

What do we mean by Human-Centered Design of Life-Critical Systems?

PubMed

Boy, Guy A

2012-01-01

Human-centered design is not a new approach to design. Aerospace is a good example of a life-critical systems domain where participatory design was fully integrated, involving experimental test pilots and design engineers as well as many other actors of the aerospace engineering community. This paper provides six topics that are currently part of the requirements of the Ph.D. Program in Human-Centered Design of the Florida Institute of Technology (FIT.) This Human-Centered Design program offers principles, methods and tools that support human-centered sustainable products such as mission or process control environments, cockpits and hospital operating rooms. It supports education and training of design thinkers who are natural leaders, and understand complex relationships among technology, organizations and people. We all need to understand what we want to do with technology, how we should organize ourselves to a better life and finally find out whom we are and have become. Human-centered design is being developed for all these reasons and issues.

Mod-5A Wind Turbine Generator Program Design Report. Volume 2: Conceptual and Preliminary Design, Book 1

NASA Technical Reports Server (NTRS)

1984-01-01

The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. There are four volumes. In Volume 2, book 1 the requirements and criteria for the design are presented. The conceptual design studies, which defined a baseline configuration and determined the weights, costs and sizes of each subsystem, are described. The development and optimization of the wind turbine generator are presented through the description of the ten intermediate configurations between the conceptual and final designs. Analyses of the system's load and dynamics are presented.

Design of impact-resistant boron/aluminum large fan blade

NASA Technical Reports Server (NTRS)

Salemme, C. T.; Yokel, S. A.

1978-01-01

The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.

An integrated database with system optimization and design features

NASA Technical Reports Server (NTRS)

Arabyan, A.; Nikravesh, P. E.; Vincent, T. L.

1992-01-01

A customized, mission-specific relational database package was developed to allow researchers working on the Mars oxygen manufacturing plant to enter physical description, engineering, and connectivity data through a uniform, graphical interface and to store the data in formats compatible with other software also developed as part of the project. These latter components include an optimization program to maximize or minimize various criteria as the system evolves into its final design; programs to simulate the behavior of various parts of the plant in Martian conditions; an animation program which, in different modes, provides visual feedback to designers and researchers about the location of and temperature distribution among components as well as heat, mass, and data flow through the plant as it operates in different scenarios; and a control program to investigate the stability and response of the system under different disturbance conditions. All components of the system are interconnected so that changes entered through one component are reflected in the others.

Development of a special-purpose test surface guided by uncertainty analysis - Introduction of a new uncertainty analysis step

NASA Technical Reports Server (NTRS)

Wang, T.; Simon, T. W.

1988-01-01

Development of a recent experimental program to investigate the effects of streamwise curvature on boundary layer transition required making a bendable, heated and instrumented test wall, a rather nonconventional surface. The present paper describes this surface, the design choices made in its development and how uncertainty analysis was used, beginning early in the test program, to make such design choices. Published uncertainty analysis techniques were found to be of great value; but, it became clear that another step, one herein called the pre-test analysis, would aid the program development. Finally, it is shown how the uncertainty analysis was used to determine whether the test surface was qualified for service.

Semiannual Report to Congress on the Effectiveness of the Civil Aviation Security Program

DTIC Science & Technology

1988-11-01

secure Zround environment and for providing local law enforcement support for airline and airport security measures. Finally, the passengers, the...operating environment for these air carriers. Airport security programs are designed to meet the threat to the specific airport. Of the 402 airports...assistance during this project. Responding to urgent requests from the Government of Liberia for onsite training of its airport security forces, FAA

Improved Graduate Program To Prepare Special Educators To Support Students with Emotional and Behavioral Disabilities in Regular Education Classrooms. Final Report. Grants for Pre-Service Personnel Training.

ERIC Educational Resources Information Center

Vermont Univ., Burlington. Center on Disability and Community Inclusion.

This report describes the activities and outcomes of a project designed to prepare educational specialists to serve students with serious emotional disturbance effectively within general education settings. The primary goal was to create a concentration within an existing special education graduate program that would train at least 10 students per…

Planning Model for Health Careers Awareness: A Summer Program. Exemplary Project in Vocational Education, Conducted under Section 132 of Public Law 94-482. Final Report.

ERIC Educational Resources Information Center

Trident Technical Coll., Charleston, SC.

This program was designed to introduce high school students to the range of career opportunities available in the health field. Specific objectives were (1) to provide students with health careers information, (2) to allow students to explore career related topics with health professionals, (3) to give students an opportunity to spend at least…

Engineering Related Technology: A Laboratory and Curriculum Design for the Newly Emerging Technology of Pollution-Corrosion Measurement and Control. Final Report.

ERIC Educational Resources Information Center

Shields, F. K.; And Others

In order to meet the educational needs for a separate curriculum at the secondary level for technological training related to pollution and corrosion measurement and control, a 3-year, 1080-hour vocational program was developed for use in an area vocational high school. As one of four programs in the technology careers area, this curriculum design…

Attitude dynamic of spin-stabilized satellites with flexible appendages

NASA Technical Reports Server (NTRS)

Renard, M. L.

1973-01-01

Equations of motion and computer programs have been developed for analyzing the motion of a spin-stabilized spacecraft having long, flexible appendages. Stability charts were derived, or can be redrawn with the desired accuracy for any particular set of design parameters. Simulation graphs of variables of interest are readily obtainable on line using program FLEXAT. Finally, applications to actual satellites, such as UK-4 and IMP-1 have been considered.

Space Station crew safety alternatives study. Volume 5: Space Station safety plan

NASA Technical Reports Server (NTRS)

Mead, G. H.; Peercy, R. L., Jr.; Raasch, R. F.

1985-01-01

The Space Station Safety Plan has been prepared as an adjunct to the subject contract final report, suggesting the tasks and implementation procedures to ensure that threats are addressed and resolution strategy options identified and incorporated into the space station program. The safety program's approach is to realize minimum risk exposure without levying undue design and operational constraints. Safety objectives and risk acceptances are discussed.

Neglected or Delinquent Program 1990-91. Final Evaluation Report. Elementary and Secondary Education Act--Chapter 1.

ERIC Educational Resources Information Center

Chamberlain, Ed

The Neglected or Delinquent Program (N or D) of the Columbus (Ohio) Public Schools is designed to provide classrooms and tutorial services in language development for students served in facilities eligible for Chapter 1 aid for the neglected or delinquent. In the 1990-91 school year, one full-time N or D teacher and 12 part-time tutors served 153…

Interagency Federal Laboratory Review Final Report

DTIC Science & Technology

1995-05-15

technology. DOE labs have made unique contributions to national security since the days of the Manhattan Project , in designing, developing, and...Weapons Responsibility Most of DOE’s large multi-program laboratories had their origin in the Manhattan Project , to develop nuclear weapons during and

Mesoscale Design of Magnetoelectric Nanocomposites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viehland, Dwight; Priya, Shashank

This is a final report for a transient program that was issued to Virginia Tech as a new program (DE-SC0001450), rather than as a renewal to our existing program (DE-FG02-06ER46290). The renewal proposal was submitted in November 2014, but because of confusion in the negotiations got issued as a new program. Subsequently, a correction was made where the new program (DE-SC0001450) was terminated, and a renewal to the existing program (DE-FG02-06ER46290) issued. About $8,000 was expended on the new program before the mistake was discovered, and actions begun to correct it. The Department of Materials Science and Engineering at Virginiamore » Tech issued a ‘Letter of Guarantee’ to the University to continue work while the issues were sorted out. The renewal proposal (DE-FG02-06ER46290) that was eventually funded was the same one as the new proposal (DE-SC0001450) that was initially funded. The $8,000 expended on the new proposal was subtracted from the eventual amount given in the renewal proposal. Here, we submit the final report for this new program (DE-SC0001450) that was terminated. Since the Statement of Work was identical to the renewal proposal (DE-FG02-06ER46290), we submit to you as the final report for the new program (DE-SC0001450) the same information that we submitted as our annual report for DE-FG02-06ER46290 that was submitted to the program manager (Refik Kortan) in June 2016.« less

Multiloop integral system test (MIST): Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gloudemans, J.R.

1991-04-01

The Multiloop Integral System Test (MIST) is part of a multiphase program started in 1983 to address small-break loss-of-coolant accidents (SBLOCAs) specific to Babcock and Wilcox designed plants. MIST is sponsored by the US Nuclear Regulatory Commission, the Babcock Wilcox Owners Group, the Electric Power Research Institute, and Babcock and Wilcox. The unique features of the Babcock and Wilcox design, specifically the hot leg U-bends and steam generators, prevented the use of existing integral system data or existing integral facilities to address the thermal-hydraulic SBLOCA questions. MIST was specifically designed and constructed for this program, and an existing facility --more » the Once Through Integral System (OTIS) -- was also used. Data from MIST and OTIS are used to benchmark the adequacy of system codes, such as RELAP5 and TRAC, for predicting abnormal plant transients. The MIST program is reported in 11 volumes. Volumes 2 through 8 pertain to groups of Phase 3 tests by type; Volume 9 presents inter-group comparisons; Volume 10 provides comparisons between the RELAP5/MOD2 calculations and MIST observations, and Volume 11 (with addendum) presents the later Phase 4 tests. This is Volume 1 of the MIST final report, a summary of the entire MIST program. Major topics include, Test Advisory Group (TAG) issues, facility scaling and design, test matrix, observations, comparison of RELAP5 calculations to MIST observations, and MIST versus the TAG issues. MIST generated consistent integral-system data covering a wide range of transient interactions. MIST provided insight into integral system behavior and assisted the code effort. The MIST observations addressed each of the TAG issues. 11 refs., 29 figs., 9 tabs.« less

ELT-572(v)2 DIRCM: simulation, system design and DTE process to protect ItAF platforms against ManPADS

NASA Astrophysics Data System (ADS)

Borriello, G.; Bonori, V.; Cresti, M.; Dente, E.; Ideo, L.; Mazzi, G.; Usai, A.; Tafuto, A.; Togna, F.

2014-10-01

In this paper authors provide a description of the currently deployed Man Portable Air Defense System (ManPADS) heat-seeking missiles. Principles of IR seeking and Aircraft signatures are shortly described. Basic information are listed on currently designed Infra-Red Counter Measure Systems, intended to protect Aircrafts against ManPADS. Authors provide an overview on ELT-572(v)2 DIRCM Program, funded by Italian Air Force, currently in low rate production phase. Description of the Design and Development phase, completed in Elettronica SpA in 2013, is reported. Development Test and Evaluation (DTE) Activities on ELT-572(v)2 DIRCM, jointly performed by Elettronica Spa and Italian Air Force Flight Test Centre, are shortly described. A summary of tests and some results are also discussed. Platform Installation Programs, using the low rate production units from ELT-572(v)2 DIRCM Program, are finally listed.

Adaptive Event-Triggered Control Based on Heuristic Dynamic Programming for Nonlinear Discrete-Time Systems.

PubMed

Dong, Lu; Zhong, Xiangnan; Sun, Changyin; He, Haibo

2017-07-01

This paper presents the design of a novel adaptive event-triggered control method based on the heuristic dynamic programming (HDP) technique for nonlinear discrete-time systems with unknown system dynamics. In the proposed method, the control law is only updated when the event-triggered condition is violated. Compared with the periodic updates in the traditional adaptive dynamic programming (ADP) control, the proposed method can reduce the computation and transmission cost. An actor-critic framework is used to learn the optimal event-triggered control law and the value function. Furthermore, a model network is designed to estimate the system state vector. The main contribution of this paper is to design a new trigger threshold for discrete-time systems. A detailed Lyapunov stability analysis shows that our proposed event-triggered controller can asymptotically stabilize the discrete-time systems. Finally, we test our method on two different discrete-time systems, and the simulation results are included.

History and Benefits of Engine Level Testing Throughout the Space Shuttle Main Engine Program

NASA Technical Reports Server (NTRS)

VanHooser, Katherine; Kan, Kenneth; Maddux, Lewis; Runkle, Everett

2010-01-01

Rocket engine testing is important throughout a program s life and is essential to the overall success of the program. Space Shuttle Main Engine (SSME) testing can be divided into three phases: development, certification, and operational. Development tests are conducted on the basic design and are used to develop safe start and shutdown transients and to demonstrate mainstage operation. This phase helps form the foundation of the program, demands navigation of a very steep learning curve, and yields results that shape the final engine design. Certification testing involves multiple engine samples and more aggressive test profiles that explore the boundaries of the engine to vehicle interface requirements. The hardware being tested may have evolved slightly from that in the development phase. Operational testing is conducted with mature hardware and includes acceptance testing of flight assets, resolving anomalies that occur in flight, continuing to expand the performance envelope, and implementing design upgrades. This paper will examine these phases of testing and their importance to the SSME program. Examples of tests conducted in each phase will also be presented.

Italy-Japan international project-based learning for developing human resources using design of welfare equipment as a subject.

PubMed

Hanafusa, A; Komeda, T; Ito, K; Zobel, P Beomonte

2015-08-01

Project-based learning (PBL) is effective for developing human resources of young students. The design of welfare equipment, such as wheelchairs and gait assistive devices, is taken as the subject in this study because these devices must be fit to their environment, users, and method of use; students must consider the circumstances of each country concerned. The program commenced in 2012 at L'Aquila, Italy, and the Shibaura Institute of Technology, Japan and has been continuing for three years. Students were divided into four groups and discussions were held on how to adapt the equipment to the user and environment. After discussion, they designed and simulated a model of the equipment using CAD. Finally, they presented their designs to each other. Through the program, students had fruitful discussions, exchanged ideas from different cultures, and learned from each other. Furthermore, friendships among the students were nurtured. It is believed that the objective of the program was satisfactorily accomplished.

The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, Daniel; Richards, Phillip William

A series of design studies were performed to inv estigate the effects of flatback airfoils on blade performance and weight for large blades using the Sandi a 100-meter blade designs as a starting point. As part of the study, the effects of varying the blade slenderness on blade structural performance was investigated. The advantages and disadvantages of blad e slenderness with respect to tip deflection, flap- wise & edge-wise fatigue resistance, panel buckling capacity, flutter speed, manufacturing labor content, blade total weight, and aerodynamic design load magn itude are quantified. Following these design studies, a final blade design (SNL100-03) wasmore » prod uced, which was based on a highly slender design using flatback airfoils. The SNL100-03 design with flatback airfoils has weight of 49 tons, which is about 16% decrease from its SNL100-02 predecessor that used conventional sharp trailing edge airfoils. Although not systematically optimized, the SNL100 -03 design study provides an assessment of and insight into the benefits of flatback airfoils for la rge blades as well as insights into the limits or negative consequences of high blade slenderness resulting from a highly slender SNL100-03 planform as was chosen in the final design definition. This docum ent also provides a description of the final SNL100-03 design definition and is intended to be a companion document to the distribution of the NuMAD blade model files for SNL100-03, which are made publicly available. A summary of the major findings of the Sandia 100-meter blade development program, from the initial SNL100-00 baseline blade through the fourth SNL100-03 blade study, is provided. This summary includes the major findings and outcomes of blade d esign studies, pathways to mitigate the identified large blade design drivers, and tool development that were produced over the course of this five-year research program. A summary of large blade tec hnology needs and research opportunities is also presented.« less

Phase I Final Scientific Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Xijia; Fetvedt, Jeremy; Dimmig, Walker

This Final Scientific Report addresses the accomplishments achieved during Phase I of DE- FE0023985, Coal Syngas Combustor Development for Supercritical CO 2 Power Cycles. The primary objective of the project was to develop a coal syngas-fueled combustor design for use with high-pressure, high-temperature, oxy-fuel, supercritical CO 2 power cycles, with particular focus given to the conditions required by the Allam Cycle. The primary goals, from the Statement of Project Objectives, were to develop: (1) a conceptual design of a syngas-fueled combustor-turbine block for a 300MWe high-pressure, oxy-fuel, sCO2 power plant; (2) the preliminary design of a 5MWt test combustor; andmore » (3) the definition of a combustor test program. Accomplishments for each of these goals are discussed in this report.« less

Design and development of FZU-32/B bomb fuze initiator. Final report 23 Jun 72--15 Nov 73

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miazza, J.

1974-05-01

The primary objective of this program was to develop a cost effective, production engineered FZU-24/B Bomb Fuze Initiator. The initiator is an electric generating device which, when installed in the fuze charging well of general purpose bombs, is capable of deriving energy from the airstream passing the bomb in free fall and converting the energy into electric energy suitable for powering a bomb fuze. The objective was to be accomplished by means of a production engineering effort carried through the evolution of design, fabrication, assembly, test, and evaluation. The baseline for the design was Harry Diamond Laboratories' Drawing No. 11716160.more » A quantity of 60 units was fabricated and tested, in accordance with the production engineered design. After some additional redesign to correct identified deficiencies, 220 units were fabricated. These units were subjected to environmental, wind tunnel, and flight testing and performance requirements were met. The final unit design was designated the FZU-32/B Bomb Fuze Initiator.« less

Bainbridge Energy Challenge. Energy efficiency and conservation block grant (EECBG) - Better buildings neighborhood program. Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraus, Yvonne X.

2014-02-14

RePower Bainbridge and Bremerton (RePower) is a residential energy-efficiency and conservation program designed to foster a sustainable, clean, and renewable energy economy. The program was a 3.5 year effort in the cities of Bainbridge Island and Bremerton, Washington, to conserve and reduce energy use, establish a trained home performance trade ally network, and create local jobs. RePower was funded through a $4.8 million grant from the US Department of Energy, Better Buildings Program. The grant’s performance period was August 1, 2010 through March 30, 2014.

MTU-pre-service teacher enhancement program. Final report, September 1992--May 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, C.S.; Yarroch, W.J.

1996-01-01

The MTU Pre-Service Teacher Enhancement Program was a two year extended project designed to introduce a select group of science and engineering undergraduate students, with good {open_quotes}people skills,{close_quotes} to the teaching profession. Participants were paid for their time spent with area teacher/mentors and were involved in a variety of in school activities, projects and observations to illustrate the teaching profession. They were encouraged to consider the teaching profession as a future career option. The student participants, however, were under no obligation to enter the Teacher Education Program at the conclusion of the program.

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Accounting for location and timing in NO{sub x} emission trading programs. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, A.L.

1997-12-01

This report describes approaches to designing emission trading programs for nitrogen oxides (NO{sub x}) to account for the locations of emission sources. When a trading region is relatively small, program managers can assume that the location of the sources engaging in trades has little or no effect. However, if policy makers extend the program to larger regions, this assumption may be questioned. Therefore, EPRI has undertaken a survey of methods for incorporating location considerations into trading programs. Application of the best method may help to preserve, and even enhance, the flexibility and savings afforded utilities by emission trading.

High-performance space shuttle auxiliary propellant valve system

NASA Technical Reports Server (NTRS)

Smith, G. M.

1973-01-01

Several potential valve closures for the space shuttle auxiliary propulsion system (SS/APS) were investigated analytically and experimentally in a modeling program. The most promising of these were analyzed and experimentally evaluated in a full-size functional valve test fixture of novel design. The engineering investigations conducted for both model and scale evaluations of the SS/APS valve closures and functional valve fixture are described. Preliminary designs, laboratory tests, and overall valve test fixture designs are presented, and a final recommended flightweight SS/APS valve design is presented.

Skylab SO71/SO72 circadian periodicity experiment. [experimental design and checkout of hardware

NASA Technical Reports Server (NTRS)

Fairchild, M. K.; Hartmann, R. A.

1973-01-01

The circadian rhythm hardware activities from 1965 through 1973 are considered. A brief history of the programs leading to the development of the combined Skylab SO71/SO72 Circadian Periodicity Experiment (CPE) is given. SO71 is the Skylab experiment number designating the pocket mouse circadian experiment, and SO72 designates the vinegar gnat circadian experiment. Final design modifications and checkout of the CPE, integration testing with the Apollo service module CSM 117 and the launch preparation and support tasks at Kennedy Space Center are reported.

Cost effective management of space venture risks

NASA Technical Reports Server (NTRS)

Giuntini, Ronald E.; Storm, Richard E.

1986-01-01

The development of a model for the cost-effective management of space venture risks is discussed. The risk assessment and control program of insurance companies is examined. A simplified system development cycle which consists of a conceptual design phase, a preliminary design phase, a final design phase, a construction phase, and a system operations and maintenance phase is described. The model incorporates insurance safety risk methods and reliability engineering, and testing practices used in the development of large aerospace and defense systems.

Feasibility study for a microwave-powered ozone sniffer aircraft, volume 2

NASA Technical Reports Server (NTRS)

1990-01-01

Using 3-D design techniques and the Advanced Surface Design Software on the Computervision Designer V-X Interactive Graphics System, the aircraft configuration was created. The canard, tail, vertical tail, and main wing were created on the system using Wing Generator, a Computervision based program introduced in Appendix A.2. The individual components of the plane were created separately and were later individually imported to the master database. An isometric view of the final configuration is presented.

Training for Desegregation in the Military.

DTIC Science & Technology

1983-03-15

finally, relates the training . designs to the presented model.9 6 1 005 D ORM 1473 EITION OF I NOV 6 OBSOLET UnclassifiedDD, I AN 72 s/N 0102-LF-014.6601...to develop and implement a program of classes in race relations. These classes were to be designed to prevent "racial unrest, tension or conflict...in 1971, even though its mission statement was revised in 1976. The new statement included the " training of Army and Navy personnel designated as

Development and test of advanced composite components. Center Directors discretionary fund program

NASA Technical Reports Server (NTRS)

Faile, G.; Hollis, R.; Ledbetter, F.; Maldonado, J.; Sledd, J.; Stuckey, J.; Waggoner, G.; Engler, E.

1985-01-01

This report describes the design, analysis, fabrication, and test of a complex bathtub fitting. Graphite fibers in an epoxy matrix were utilized in manufacturing of 11 components representing four different design and layup concepts. Design allowables were developed for use in the final stress analysis. Strain gage measurements were taken throughout the static load test and correlation of test and analysis data were performed, yielding good understanding of the material behavior and instrumentation requirements for future applications.

A comprehensive postpartum follow-up health care program for women with history of preeclampsia: protocol for a mixed methods research.

PubMed

Kamravamanesh, Mastaneh; Kohan, Shahnaz; Rezavand, Negin; Farajzadegan, Ziba

2018-05-18

Long-term postpartum follow-up is of great importance since women with preeclampsia history are at high risk of upcoming health complications. However, postpartum follow-up rates are poor. According to evidences, preeclampsia is not just a transient health problem; rather it causes short term and long term complications, which affect women's life for years after delivery. Although it seems the problem is solved by the end of pregnancy, the follow-up of subjects should not be stopped after delivery. Postpartum is the best possible time to provide necessary care to these women who are at the risk of future complications. Due to importance of well-designed follow-up plan for women suffering preeclampsia, this study will carry out to provide a postpartum follow-up health care program for subjected women. This study is a qualitative-quantitative mixed sequencing exploratory study that consists of three consecutive phases. In this study, following a qualitative approach, the researcher will explain the needs and strategies related to promoting the health of women with preeclampsia history in the postpartum period. By entering the second phase, the researcher will design a comprehensive follow-up health care program in the postpartum period in which, in addition to using the qualitative study results, related papers and texts will be also used. The proposed program is designed by a panel of experts based on prioritization guidelines. Finally, after passing different stages of program finalizing, its effectiveness on the lifestyle of women with preeclampsia history will be investigated in a semi-experimental study in the third phase of the study. It is expected conducting a mixed method study to design and execute an interventional program to follow up women with preeclampsia history improve their health status and well-being, while reducing their health care costs through prevention in various levels within the current structure of health care services. If this program is effective, it could be included in the postpartum health care guidelines. IRCT20170927036445N2 Registered 10 March 2018.

Final Technical Progress Report; Closeout Certifications; CSSV Newsletter Volume I; CSSV Newsletter Volume II; CSSV Activity Journal; CSSV Final Financial Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houston, Johnny L; Geter, Kerry

This Project?s third year of implementation in 2007-2008, the final year, as designated by Elizabeth City State University (ECSU), in cooperation with the National Association of Mathematicians (NAM) Inc., in an effort to promote research and research training programs in computational science ? scientific visualization (CSSV). A major goal of the Project was to attract the energetic and productive faculty, graduate and upper division undergraduate students of diverse ethnicities to a program that investigates science and computational science issues of long-term interest to the Department of Energy (DoE) and the nation. The breadth and depth of computational science?scientific visualization andmore » the magnitude of resources available are enormous for permitting a variety of research activities. ECSU?s Computational Science-Science Visualization Center will serve as a conduit for directing users to these enormous resources.« less

Northwestern Pennsylvania Cooperative Demonstration Project (High Technology). Final Report.

ERIC Educational Resources Information Center

Indiana Univ. of Pennsylvania. Center for Vocational Personnel Preparation.

This document reports on a project designed to customize training for employees of manufacturing industries in six western Pennsylvania counties. Project goals were to facilitate collaborative vocational and technical training programs between educational institutions and private sector companies and to establish demonstration sites, manufacturing…

Professional Development and TransLink[R]. Final Report.

ERIC Educational Resources Information Center

Kuhn, Beverly T.; Jasek, Deborah

This report covers one segment of a larger professional development program for transportation professionals that addresses the need to develop a larger cadre of transportation professionals capable of designing, planning, managing, operating, and maintaining the transportation infrastructure nationwide. Three specific tasks were undertaken and…

Newman Unit 1 advanced solar repowering. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-04-01

The five appendices give the selection process and system specification of the Newman Unit 1 solar repowering system, including the conceptual design drawings and diagrams; input data for the simulation program; and a review of the most important characteristics of the existing plant. (LEW)

Evaluation of Portland Cement concretes containing ground granulated blast furnace slag : final report.

DOT National Transportation Integrated Search

2002-05-01

A two part laboratory experimental program was conducted to evaluate strength and durability of various concrete mix : designs. In Part I of the study, the influence of using Grade 120 ground granulated blast furnace slag (GGBFS) on the : strength an...

Final design of a free-piston hydraulic advanced Stirling conversion system

NASA Technical Reports Server (NTRS)

Wallace, D. A.; Noble, J. E.; Emigh, S. G.; Ross, B. A.; Lehmann, G. A.

1991-01-01

Under the US Department of Energy's (DOEs) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for solar distributed receiver systems. The final design is described of an engineering prototype advanced Stirling conversion system (ASCS) with a free-piston hydraulic engine output capable of delivering about 25 kW of electric power to a utility grid. The free-piston Stirling engine has the potential for a highly reliable engine with long life because it has only a few moving parts, has noncontacting bearings, and can be hermetically sealed. The ASCS is designed to deliver maximum power per year over a range of solar input with a design life of 30 years (60,000 h). The system includes a liquid Nak pool boiler heat transport system and a free-piston Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator.

Final design of a free-piston hydraulic advanced Stirling conversion system

NASA Astrophysics Data System (ADS)

Wallace, D. A.; Noble, J. E.; Emigh, S. G.; Ross, B. A.; Lehmann, G. A.

Under the US Department of Energy's (DOEs) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for solar distributed receiver systems. The final design is described of an engineering prototype advanced Stirling conversion system (ASCS) with a free-piston hydraulic engine output capable of delivering about 25 kW of electric power to a utility grid. The free-piston Stirling engine has the potential for a highly reliable engine with long life because it has only a few moving parts, has noncontacting bearings, and can be hermetically sealed. The ASCS is designed to deliver maximum power per year over a range of solar input with a design life of 30 years (60,000 h). The system includes a liquid Nak pool boiler heat transport system and a free-piston Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator.

Comparison of pain neurophysiology knowledge among health sciences students: a cross-sectional study.

PubMed

Adillón, Cristina; Lozano, Èrik; Salvat, Isabel

2015-10-22

A key tool for use in approaching chronic pain treatment is educating patients to reconceptualize pain. Thus, health professionals are fundamental to the transmission of pain information to patients. Because their understanding of pain is acquired during the educational process, the aim of this study was to compare the knowledge about pain neurophysiology in first and final-year students from three different health science programs at a single University to determine their gain in knowledge using a well-known questionnaire designed to evaluate the understanding of pain. The Neurophysiology of Pain Questionnaire (19 closed-ended questions) was administered to students in their first and final years of study in Medicine, Physiotherapy, or Nutrition. The percentage of correct responses was determined and comparisons of the results were analyzed between the programs as well as between the first and final years of study within each program. For all tests, p-values were two-sided, and results with p-values below 0.05 were considered statistically significant. The participation rate was greater than 51% (n = 285). The mean percentage of correct responses, reported as mean (SD), among the first year students was 42.14 (12.23), without significant statistical differences detected between the programs. The mean percentages of correct responses for students in their final year were as follows: Medicine, 54.38 (13.87); Physiotherapy, 68.92 (16.22); Nutrition, 42.34 (10.11). We found statistically significant differences among all three programs and between the first and final years in Medicine and Physiotherapy. A question-by-question analysis showed that the percentage of correct responses for questions related to the biopsychosocial aspects of pain was higher for students in Physiotherapy than those in Medicine. Students in their final years of Medicine and Physiotherapy programs know more about the neurophysiology of pain than students in their first years of these programs, however there are some questions where first years students have better results. Physiotherapy students have greater knowledge of neurophysiology of pain than Medicine students, especially the biopsychosocial aspects. Even so, their understanding may not be sufficient and does not guarantee an approach to chronic pain that will help patients reconceptualize their pain.

Heliogyro Preliminary Design, Phase 2

NASA Technical Reports Server (NTRS)

1978-01-01

There are 12 blades in the Heliogyro design, and each blade is envisioned to be 8 meters in width and 7,500 meters in length. The blades are expected to be composed primarily of a thin membrane constructed of material such as Kapton film with an aluminum reflective coating on one side and an infrared emissive coating on the other. The present Phase 2 Final Report covers work done on the following six topics: (1) Design and analysis of a stowable circular lattice batten for the Heliogyro blade. (2) Design and analysis of a biaxially tensioned blade panel. (3) Definition of a research program for micrometeoroid damage to tendons. (4) A conceptual design for a flight test model of the Heliogyro. (5) Definition of modifications to the NASTRAN computer program required to provide improved analysis of the Heliogyro. (6) A User's Manual covering applications of NASTRAN to the Heliogyro.

Static analysis techniques for semiautomatic synthesis of message passing software skeletons

DOE PAGES

Sottile, Matthew; Dagit, Jason; Zhang, Deli; ...

2015-06-29

The design of high-performance computing architectures demands performance analysis of large-scale parallel applications to derive various parameters concerning hardware design and software development. The process of performance analysis and benchmarking an application can be done in several ways with varying degrees of fidelity. One of the most cost-effective ways is to do a coarse-grained study of large-scale parallel applications through the use of program skeletons. The concept of a “program skeleton” that we discuss in this article is an abstracted program that is derived from a larger program where source code that is determined to be irrelevant is removed formore » the purposes of the skeleton. In this work, we develop a semiautomatic approach for extracting program skeletons based on compiler program analysis. Finally, we demonstrate correctness of our skeleton extraction process by comparing details from communication traces, as well as show the performance speedup of using skeletons by running simulations in the SST/macro simulator.« less

B-70 Aircraft Study. Volume 2

NASA Technical Reports Server (NTRS)

1972-01-01

Volume 2 of the final report on the B-70 aircraft study is presented here. The B-70 Program, at the onset, was a full weapon system capable of sustained Mach 3 flight for the major portion of its design missions. The weapon system was to enter the SAC inventory as an RS-70 with the first intercontinental resonnaissance/bomber wing scheduled to go operational in July, 1964. After several redirections, a two XB-70 air vehicle program emerged with its prime objective being to demonstrate the technical feasibility of sustained Mach 3 flight. This section describes the original Weapon System 110A concepts, the evolution of the RS-70 design, and the XB-70 air vehicles which demonstrated the design, fabrication, and technical feasibility of long range Mach 3 flights at high altitude. The data presented shows that a very large step forward in the state-of-the-art of manned aircraft design was achieved during the B-70 development program and that advances were made and incorporated in every area, including design, materials application, and manufacturing techniques.

The elements of design knowledge capture

NASA Technical Reports Server (NTRS)

Freeman, Michael S.

1988-01-01

This paper will present the basic constituents of a design knowledge capture effort. This will include a discussion of the types of knowledge to be captured in such an effort and the difference between design knowledge capture and more traditional knowledge base construction. These differences include both knowledge base structure and knowledge acquisition approach. The motivation for establishing a design knowledge capture effort as an integral part of major NASA programs will be outlined, along with the current NASA position on that subject. Finally the approach taken in design knowledge capture for Space Station will be contrasted with that used in the HSTDEK project.

Process design and evaluation of production of bioethanol and β-lactam antibiotic from lignocellulosic biomass.

PubMed

Kim, Sung Bong; Park, Chulhwan; Kim, Seung Wook

2014-11-01

To design biorefinery processes producing bioethanol from lignocellulosic biomass with dilute acid pretreatment, biorefinery processes were simulated using the SuperPro Designer program. To improve the efficiency of biomass use and the economics of biorefinery, additional pretreatment processes were designed and evaluated, in which a combined process of dilute acid and aqueous ammonia pretreatments, and a process of waste media containing xylose were used, for the production of 7-aminocephalosporanic acid. Finally, the productivity and economics of the designed processes were compared. Copyright © 2014 Elsevier Ltd. All rights reserved.

DESIGN OF TWO-DIMENSIONAL SUPERSONIC TURBINE ROTOR BLADES WITH BOUNDARY-LAYER CORRECTION

NASA Technical Reports Server (NTRS)

Goldman, L. J.

1994-01-01

A computer program has been developed for the design of supersonic rotor blades where losses are accounted for by correcting the ideal blade geometry for boundary layer displacement thickness. The ideal blade passage is designed by the method of characteristics and is based on establishing vortex flow within the passage. Boundary-layer parameters (displacement and momentum thicknesses) are calculated for the ideal passage, and the final blade geometry is obtained by adding the displacement thicknesses to the ideal nozzle coordinates. The boundary-layer parameters are also used to calculate the aftermixing conditions downstream of the rotor blades assuming the flow mixes to a uniform state. The computer program input consists essentially of the rotor inlet and outlet Mach numbers, upper- and lower-surface Mach numbers, inlet flow angle, specific heat ratio, and total flow conditions. The program gas properties are set up for air. Additional gases require changes to be made to the program. The computer output consists of the corrected rotor blade coordinates, the principal boundary-layer parameters, and the aftermixing conditions. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 7094. This program was developed in 1971.

ICAM (Integrated Computer Aided Manufacturing) Conceptual Design for Computer-Integrated Manufacturing. Volume 1. Project Overview and Technical Summary

DTIC Science & Technology

1984-06-29

sheet metal, machined and composite parts and assembling the components into final pruJucts o Planning, evaluating, testing, inspecting and...Research showed that current programs were pursuing the design and demonstration of integrated centers for sheet metal, machining and composite ...determine any metal parts required and to schedule these requirements from the machining center. Figure 3-33, Planned Composite Production, shows

Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, J.; Hecker, G.; Li, S.

2011-10-01

The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), themore » design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall within ranges expected for conventional radial flow machines. Based on these measurements, the expected efficiency peak for prototype application is 93.64%. These data were used in the final sizing of the supporting mechanical and balance of plant equipment. The preliminary equipment cost for the design specification is $1450/kW with a total supply schedule of 28 months. This equipment supply includes turbine, generator, unit controls, limited balance of plant equipment, field installation, and commissioning. Based on the selected head and flow design conditions, fish passage survival through the final turbine is estimated to be approximately 98% for 7.9-inch (200-mm) fish, and the predicted survival reaches 100% for fish 3.9 inches (100 mm) and less in length. Note that fish up to 7.9- inches (200 mm) in length make up more than 90% of fish entrained at hydro projects in the United States. Completion of these efforts provides a mechanical and electrical design that can be readily adapted to site-specific conditions with additional engineering development comparable to costs associated with conventional turbine designs.« less

Tidd hot gas clean up program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This Final Report on the Tidd Hot Gas Clean Up Program covers the period from initial Proof-of-Concept testing in August, 1990, through final equipment inspections in May, 1995. The Tidd Hot Gas Clean Up (HGCU) system was installed in the Tidd Pressurized Fluidized Bed Combustion (PFBC) Demonstration Plant, which is the first utility-scale PFBC plant in the United States. Detailed design work on the project began in July, 1990, and site construction began in December, 1991. Initial operation of the system occurred in May, 1992, and the hot gas filter was commissioned in October, 1992. The test program ended inmore » March, 1995, when the Tidd Plant was shut down following its four-year test program. Section 1.0 of this report is an executive summary of the project covering the project background, system description, test results and conclusions. Section 2.0 is an introduction covering the program objectives and schedule. Section 3.0 provides detailed descriptions of the system and its major components. Section 4.0 provides detailed results of all testing including observations and posttest inspection results. Sections 5.0 and 6.0 list the program conclusions and recommendations, respectively. Appendix I is a report prepared by Southern Research Institute on the properties of Tidd PFBC ash sampled during the test program. Appendix II is a report prepared by Westinghouse STC on the performance of candle filter fail-safe regenerator devices.« less

A Study of Alternatives for Disseminating Knowledge and Planning for Civil Defense Education Among School Age Children--12-14 Years. Final Report.

ERIC Educational Resources Information Center

Hutchins, C. L.; And Others

A description is given of alternative goals and plans for introducing a program for civil defense readiness in grades 7-9. This program is designed to train young people in survival skills for disasters, both natural and man-made. While emphasis is placed on children at the junior high school level, an outline is provided for extending such…

Software Technology for Adaptable Reliable Systems (STARS) Workshop March 24-27 1986.

DTIC Science & Technology

1986-03-01

syntax is aug- monitor program behavior. Trace and mented to accept design notes in arbitrary single-step facilities will provide the capability ... capabilities of these worksta- inrs tions make them a logical choice for hosting The final component of Vise is the a visual development environment. We...the following When the user picks the desired action, capabilities : graphical program display and linguistic analysis is used to extract informa

USAF Summer Research Program - 1994 Summer Faculty Research Program, Final Reports, Volume 5A, Wright Laboratory

DTIC Science & Technology

1994-12-01

Developing an Object-oriented S DRGuoxiangGu WL/MNAG 5- 24 Louisiana State University , Baton Rouge , LA Gain Scheduled Missile Autopilot...candidates being notified of their acceptance after scheduled deadlines. The total applicants and participants for 1994 are shown in this table. Table 2...planning and scheduling literature to identify developments that might apply to the design of a sensor manager. Applications examined primarily come

Innovative grinding wheel design for cost-effective machining of advanced ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Licht, R.H.; Kuo, P.; Liu, S.

2000-05-01

This Final Report covers the Phase II Innovative Grinding Wheel (IGW) program in which Norton Company successfully developed a novel grinding wheel for cost-effective cylindrical grinding of advanced ceramics. In 1995, Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics using small prototype wheels. The Phase II program was initiated to scale-up the new superabrasive wheel specification to larger diameters, 305-mm to 406-mm, required for most production grinding of cylindrical ceramic parts, and to perform in-house and independent validation grinding tests.

New developments in water efficiency

NASA Astrophysics Data System (ADS)

Gregg, Tony T.; Dewees, Amanda; Gross, Drema; Hoffman, Bill; Strub, Dan; Watson, Matt

2006-10-01

An overview of significant new developments in water efficiency is presented in this paper. The areas covered will be legislative, regulatory, new programs or program wrinkles, new products, and new studies on the effectiveness of conservation programs. Examples include state and local level efficiency regulations in Texas; the final results of the national submetering study for apartments in the US; the US effort to adopt the IWA protocols for leak detection; new water efficient commercial products such as ET irrigation controllers, new models of efficient clothes washers, and innovative toilet designs.

An Integrated Approach to Functional Engineering: An Engineering Database for Harness, Avionics and Software

NASA Astrophysics Data System (ADS)

Piras, Annamaria; Malucchi, Giovanni

2012-08-01

In the design and development phase of a new program one of the critical aspects is the integration of all the functional requirements of the system and the control of the overall consistency between the identified needs on one side and the available resources on the other side, especially when both the required needs and available resources are not yet consolidated, but they are evolving as the program maturity increases.The Integrated Engineering Harness Avionics and Software database (IDEHAS) is a tool that has been developed to support this process in the frame of the Avionics and Software disciplines through the different phases of the program. The tool is in fact designed to allow an incremental build up of the avionics and software systems, from the description of the high level architectural data (available in the early stages of the program) to the definition of the pin to pin connectivity information (typically consolidated in the design finalization stages) and finally to the construction and validation of the detailed telemetry parameters and commands to be used in the test phases and in the Mission Control Centre. The key feature of this approach and of the associated tool is that it allows the definition and the maintenance / update of all these data in a single, consistent environment.On one side a system level and concurrent approach requires the feasibility to easily integrate and update the best data available since the early stages of a program in order to improve confidence in the consistency and to control the design information.On the other side, the amount of information of different typologies and the cross-relationships among the data imply highly consolidated structures requiring lot of checks to guarantee the data content consistency with negative effects on simplicity and flexibility and often limiting the attention to special needs and to the interfaces with other disciplines.

Back-Up/ Peak Shaving Fuel Cell System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Staudt, Rhonda L.

2008-05-28

This Final Report covers the work executed by Plug Power from 8/11/03 – 10/31/07 statement of work for Topic 2: advancing the state of the art of fuel cell technology with the development of a new generation of commercially viable, stationary, Back-up/Peak-Shaving fuel cell systems, the GenCore II. The Program cost was $7.2 M with the Department of Energy share being $3.6M and Plug Power’s share being $3.6 M. The Program started in August of 2003 and was scheduled to end in January of 2006. The actual program end date was October of 2007. A no cost extension was grated.more » The Department of Energy barriers addressed as part of this program are: Technical Barriers for Distributed Generation Systems: o Durability o Power Electronics o Start up time Technical Barriers for Fuel Cell Components: o Stack Material and Manufacturing Cost o Durability o Thermal and water management Background The next generation GenCore backup fuel cell system to be designed, developed and tested by Plug Power under the program is the first, mass-manufacturable design implementation of Plug Power’s GenCore architected platform targeted for battery and small generator replacement applications in the telecommunications, broadband and UPS markets. The next generation GenCore will be a standalone, H2 in-DC-out system. In designing the next generation GenCore specifically for the telecommunications market, Plug Power is teaming with BellSouth Telecommunications, Inc., a leading industry end user. The final next generation GenCore system is expected to represent a market-entry, mass-manufacturable and economically viable design. The technology will incorporate: • A cost-reduced, polymer electrolyte membrane (PEM) fuel cell stack tailored to hydrogen fuel use • An advanced electrical energy storage system • A modular, scalable power conditioning system tailored to market requirements • A scaled-down, cost-reduced balance of plant (BOP) • Network Equipment Building Standards (NEBS), UL and CE certifications.« less

Bellman's GAP--a language and compiler for dynamic programming in sequence analysis.

PubMed

Sauthoff, Georg; Möhl, Mathias; Janssen, Stefan; Giegerich, Robert

2013-03-01

Dynamic programming is ubiquitous in bioinformatics. Developing and implementing non-trivial dynamic programming algorithms is often error prone and tedious. Bellman's GAP is a new programming system, designed to ease the development of bioinformatics tools based on the dynamic programming technique. In Bellman's GAP, dynamic programming algorithms are described in a declarative style by tree grammars, evaluation algebras and products formed thereof. This bypasses the design of explicit dynamic programming recurrences and yields programs that are free of subscript errors, modular and easy to modify. The declarative modules are compiled into C++ code that is competitive to carefully hand-crafted implementations. This article introduces the Bellman's GAP system and its language, GAP-L. It then demonstrates the ease of development and the degree of re-use by creating variants of two common bioinformatics algorithms. Finally, it evaluates Bellman's GAP as an implementation platform of 'real-world' bioinformatics tools. Bellman's GAP is available under GPL license from http://bibiserv.cebitec.uni-bielefeld.de/bellmansgap. This Web site includes a repository of re-usable modules for RNA folding based on thermodynamics.

The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 1

NASA Technical Reports Server (NTRS)

Onwubiko, Chinyere; Onyebueke, Landon

1996-01-01

This program report is the final report covering all the work done on this project. The goal of this project is technology transfer of methodologies to improve design process. The specific objectives are: 1. To learn and understand the Probabilistic design analysis using NESSUS. 2. To assign Design Projects to either undergraduate or graduate students on the application of NESSUS. 3. To integrate the application of NESSUS into some selected senior level courses in Civil and Mechanical Engineering curricula. 4. To develop courseware in Probabilistic Design methodology to be included in a graduate level Design Methodology course. 5. To study the relationship between the Probabilistic design methodology and Axiomatic design methodology.

KSC-2014-3543

NASA Image and Video Library

2014-08-15

CAPE CANAVERAL, Fla. – The Kennedy Space Center Visitor Complex Spaceperson poses for a photo with Carver Middle School students and their teacher from Orlando, Florida, during the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. The team, members of the After School All-Stars, were regional winners and advanced to the final competition. For the competition, students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper

Final Report of the Vocational Assessment Project, 1979-80.

ERIC Educational Resources Information Center

Rutgers, The State Univ., New Brunswick, NJ. School of Medicine.

To improve vocational rehabilitation programs for schizophrenic persons, a project sought to design an effective assessment strategy. Inactive records of schizophrenic clients at New Jersey sheltered workshops were examined to determine validity and reliability of assessment instruments being used. General Aptitude Test Battery (GATB) profiles of…

Air Force Tech Order Management System (AFTOMS). Automation Plan-Final Report. Version 1.0

DOT National Transportation Integrated Search

1988-02-01

Computer aided Acquisition and Logistics Support (CALS) is a Department of Defense (DoD) program designed to improve weapon systems support through digital automation. In June 1985, the joint industry/DoD Task Force on CALS issued a five volume repor...

Manufacturing Curriculum Grant. Final Report.

ERIC Educational Resources Information Center

Scarborough, Jule Dee

A manufacturing curriculum for secondary vocational programs was designed to bridge the gap between grades 9-10 level courses and the community college-level curriculum of the Illinois Plan for Industrial Education. During the project, a literature review of manufacturing curriculum materials was conducted, a manufacturing conceptual framework was…

Articulated, Performance-Based Instruction Objectives Guide for Automotive Mechanics. Final Document. Revised.

ERIC Educational Resources Information Center

Henderson, William Edward, Jr.

Developed during a project designed to provide continuous, performance-based vocational training at the secondary and postsecondary levels, this instructional guide is intended to help teachers implement a laterally and vertically articulated secondary level automotive mechanics program. Introductory materials include descriptions of Automotive…

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: McDonnell-Douglas Helicopter Company achievements

NASA Technical Reports Server (NTRS)

Toossi, Mostafa; Weisenburger, Richard; Hashemi-Kia, Mostafa

1993-01-01

This paper presents a summary of some of the work performed by McDonnell Douglas Helicopter Company under NASA Langley-sponsored rotorcraft structural dynamics program known as DAMVIBS (Design Analysis Methods for VIBrationS). A set of guidelines which is applicable to dynamic modeling, analysis, testing, and correlation of both helicopter airframes and a large variety of structural finite element models is presented. Utilization of these guidelines and the key features of their applications to vibration modeling of helicopter airframes are discussed. Correlation studies with the test data, together with the development and applications of a set of efficient finite element model checkout procedures, are demonstrated on a large helicopter airframe finite element model. Finally, the lessons learned and the benefits resulting from this program are summarized.

Final Report, University Research Program in Robotics (URPR), Nuclear Facilities Clean-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesar, Delbert; Kapoor, Chetan; Pryor, Mitch

This final report describes the research activity at the University of Texas at Austin with application to EM needs at DOE. This research activity is divided in to two major thrusts and contributes to the overall University Research Program in Robotics (URPR) thrust by providing mechanically oriented robotic solutions based on modularity and generalized software. These thrusts are also the core strengths of the UTA program that has a 40-year history in machine development, 30 years specifically devoted to robotics. Since 1975, much of this effort has been to establish the general analytical and design infrastructure for an open (modular)more » architecture of systems with many degrees of freedom that are able to satisfy a broad range of applications for future production machines. This work has coalesced from two principal areas: standardized actuators and generalized software.« less

Development, Testing, and Dissemination of Nonaversive Techniques for Working with Children with Autism: Demonstration of a "Best Practices" Model for Parents and Teachers. The A-B-C-D Model for Supporting Students with Autism (Antecedents, Behaviors, Consequences, Data). Final Report.

ERIC Educational Resources Information Center

Ikeda, Martin J.; Tucker, Richard; Rankin, Barbara

This final report describes the activities and outcomes of a federally funded project that was designed to develop, validate, and disseminate a training program for teachers of students with autism. The strategies taught to teachers were those that have been accepted as best practice in autism literature. Since 1996 more than 500 teachers,…

An extensive coronagraphic simulation applied to LBT

NASA Astrophysics Data System (ADS)

Vassallo, D.; Carolo, E.; Farinato, J.; Bergomi, M.; Bonavita, M.; Carlotti, A.; D'Orazi, V.; Greggio, D.; Magrin, D.; Mesa, D.; Pinna, E.; Puglisi, A.; Stangalini, M.; Verinaud, C.; Viotto, V.

2016-08-01

In this article we report the results of a comprehensive simulation program aimed at investigating coronagraphic capabilities of SHARK-NIR, a camera selected to proceed to the final design phase at Large Binocular Telescope. For the purpose, we developed a dedicated simulation tool based on physical optics propagation. The code propagates wavefronts through SHARK optical train in an end-to-end fashion and can implement any kind of coronagraph. Detection limits can be finally computed, exploring a wide range of Strehl values and observing conditions.

Research Laboratory for Engineering and Tehnology (ReLEnT)-Summer Program

NASA Technical Reports Server (NTRS)

Okhio, Cyril B.

1996-01-01

During the fiscal years 1994-1995 students at Central State University (CSU) have worked diligently under the supervision of the PI and associates to plan, design and conduct a four-week hands on summer program for high school students in grades 9 to 12. These workshops consists of experiments and computer aided design and manufacturing, designed to constructively stimulate interests in engineering and technology, and promote enrollment at CSU after they matriculate from high school. The experience gained in two years will be utilized to realize one of the deliverables for CSU engineering program during 1996. In FY-96 a new total of 30 students are now being interviewed for the 1996 program. This grant also provides resource for students enrolled in CSU's engineering program to work as undergraduate research assistants and ReLEnT tuition scholarship awards. These students are involved in the development of research, design projects, workshop procedures, laboratory exercises and seminars. Undergraduate students receiving tuition scholarships are required to maintain a cumulative grade point average of 3.0 or higher. Finally, the ReLEnT award has made it possible for CSU to acquire some experimental and CFD capability which now provides us with the opportunity to compete and respond to RFP's on a competitive basis and a timely manner.