Quantitative Measurements of the Effects of Variations in Panel Density and Distributions for Panel Method Computer Programs

DTIC Science & Technology

1980-01-01

AND ADDRESS 1 .PROGRAM ELEMENT. PROJECT, TASK AREA & WORK UNIT NUMBERS Aircraft and -.rew Systems Technology Di r. (C:ode 60 E61-.U o A0 Naval Air...0 . . . . . . . . . . . B- 1 B-If Input Statistics For Equations 5 and 6 .... ....... B- 2 B-Ill Computation of Coefficients of...trapezoidal panels and the formula for PAR can be derived for the case where equal spanwise and chordwise divisions are used: PAR (N/2M)/( 1 +X ( 2 = ( 2

Fabrication and evaluation of brazed titanium-clad borsic/aluminum skin-stringer panels

NASA Technical Reports Server (NTRS)

Bales, T. T.; Royster, D. M.; Mcwithey, R. R.

1980-01-01

A successful brazing process was developed and evaluated for fabricating full-scale titanium-clad Borsic/aluminum skin-stringer panels. A panel design was developed consisting of a hybrid composite skin reinforced with capped honeycomb-core stringers. Six panels were fabricated for inclusion in the program which included laboratory testing of panels at ambient temperatures and 533 K (500 F) and flight service evaluation on the NASA Mach 3 YF-12 airplane. All panels tested met or exceeded stringent design requirements and no deleterious effects on panel properties were detected followng flight service evaluation on the YF-12 airplane.

The revised solar array synthesis computer program

NASA Technical Reports Server (NTRS)

1970-01-01

The Revised Solar Array Synthesis Computer Program is described. It is a general-purpose program which computes solar array output characteristics while accounting for the effects of temperature, incidence angle, charged-particle irradiation, and other degradation effects on various solar array configurations in either circular or elliptical orbits. Array configurations may consist of up to 75 solar cell panels arranged in any series-parallel combination not exceeding three series-connected panels in a parallel string and no more than 25 parallel strings in an array. Up to 100 separate solar array current-voltage characteristics, corresponding to 100 equal-time increments during the sunlight illuminated portion of an orbit or any 100 user-specified combinations of incidence angle and temperature, can be computed and printed out during one complete computer execution. Individual panel incidence angles may be computed and printed out at the user's option.

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

MRM Evaluation Research Program

NASA Technical Reports Server (NTRS)

Taylor, James C.

1998-01-01

This is an interim report on the current output of the MRM evaluation research program. During 1998 this research program has used new and existing data to create an important tool for the development and improvement of "maintenance resource management" (MRM). Thousands of surveys completed by participants in airline MRM training and/or behavior change programs have, for the first time, been consolidated into a panel of "MRM Attitudes and Opinion Profiles." These profiles can be used to compare the attitudes about decision making and communication in any given company at any stage in its MRM program with attitudes of a large sample of like employees during a similar period in their MRM involvement. This panel of comparison profiles for attitudes and opinions is a tool to help audit the effectiveness of a maintenance human factors program. The profile panel is the first of several tools envisioned for applying the information accumulating in MRM databases produced as one of the program's long range objectives.

The Uses and Effects of Video Viewing among Swedish Adolescents. An Ethnographic Study of Adolescent Video Users. Media Panel Report No. 31.

ERIC Educational Resources Information Center

Roe, Keith; Salomonsson, Karin

This report is one in a series dealing with Swedish adolescents' uses of video based upon the Media Panel research program, a three-wave, longitudinal research program on video use conducted at the Department of Sociology, the University of Lund, and the Department for Information Techniques, the University College of Vaxjo, Sweden. Data were…

PROGRAM VSAERO: A computer program for calculating the non-linear aerodynamic characteristics of arbitrary configurations: User's manual

NASA Technical Reports Server (NTRS)

Maskew, B.

1982-01-01

VSAERO is a computer program used to predict the nonlinear aerodynamic characteristics of arbitrary three-dimensional configurations in subsonic flow. Nonlinear effects of vortex separation and vortex surface interaction are treated in an iterative wake-shape calculation procedure, while the effects of viscosity are treated in an iterative loop coupling potential-flow and integral boundary-layer calculations. The program employs a surface singularity panel method using quadrilateral panels on which doublet and source singularities are distributed in a piecewise constant form. This user's manual provides a brief overview of the mathematical model, instructions for configuration modeling and a description of the input and output data. A listing of a sample case is included.

USSAERO computer program development, versions B and C

NASA Technical Reports Server (NTRS)

Woodward, F. A.

1980-01-01

Versions B and C of the unified subsonic and supersonic aerodynamic analysis program, USSAERO, are described. Version B incorporates a new symmetrical singularity method to provide improved surface pressure distributions on wings in subsonic flow. Version C extends the range of application of the program to include the analysis of multiple engine nacelles or finned external stores. In addition, nonlinear compressibility effects in high subsonic and supersonic flows are approximated using a correction based on the local Mach number at panel control points. Several examples are presented comparing the results of these programs with other panel methods and experimental data.

Finite-element nonlinear transient response computer programs PLATE 1 and CIVM-PLATE 1 for the analysis of panels subjected to impulse or impact loads

NASA Technical Reports Server (NTRS)

Spilker, R. L.; Witmer, E. A.; French, S. E.; Rodal, J. J. A.

1980-01-01

Two computer programs are described for predicting the transient large deflection elastic viscoplastic responses of thin single layer, initially flat unstiffened or integrally stiffened, Kirchhoff-Lov ductile metal panels. The PLATE 1 program pertains to structural responses produced by prescribed externally applied transient loading or prescribed initial velocity distributions. The collision imparted velocity method PLATE 1 program concerns structural responses produced by impact of an idealized nondeformable fragment. Finite elements are used to represent the structure in both programs. Strain hardening and strain rate effects of initially isotropic material are considered.

75 FR 18848 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Prevention...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-13

... Comparative Effectiveness Research Program, DP 10-003, Initial Review In accordance with Section 10(a)(2) of... to ``Prevention Research Centers Comparative Effectiveness Research Program, DP 10-003.'' Contact...

Aircraft interior noise reduction by alternate resonance tuning

NASA Technical Reports Server (NTRS)

Gottwald, James A.; Bliss, Donald B.

1990-01-01

The focus is on a noise control method which considers aircraft fuselages lined with panels alternately tuned to frequencies above and below the frequency that must be attenuated. An interior noise reduction called alternate resonance tuning (ART) is described both theoretically and experimentally. Problems dealing with tuning single paneled wall structures for optimum noise reduction using the ART methodology are presented, and three theoretical problems are analyzed. The first analysis is a three dimensional, full acoustic solution for tuning a panel wall composed of repeating sections with four different panel tunings within that section, where the panels are modeled as idealized spring-mass-damper systems. The second analysis is a two dimensional, full acoustic solution for a panel geometry influenced by the effect of a propagating external pressure field such as that which might be associated with propeller passage by a fuselage. To reduce the analysis complexity, idealized spring-mass-damper panels are again employed. The final theoretical analysis presents the general four panel problem with real panel sections, where the effect of higher structural modes is discussed. Results from an experimental program highlight real applications of the ART concept and show the effectiveness of the tuning on real structures.

75 FR 27000 - Hearings of the Review Panel on Prison Rape

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (OJP) Docket No. 1519] Hearings of the Review Panel on Prison Rape AGENCY: Office of Justice Programs, Justice. ACTION: Notice of hearing. SUMMARY: The Office of Justice Programs (OJP) announces that the Review Panel on Prison Rape (Panel) will...

76 FR 20711 - Hearings of the Review Panel on Prison Rape

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-13

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (OCR) Docket No. 1548] Hearings of the Review Panel on Prison Rape AGENCY: Office of Justice Programs, Justice. ACTION: Notice of hearing. SUMMARY: The Office of Justice Programs (OJP) announces that the Review Panel on Prison Rape (Panel) will...

78 FR 77495 - Hearings of the Review Panel on Prison Rape

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (OCR) Docket No. 1642] Hearings of the Review Panel on Prison Rape AGENCY: Office of Justice Programs, Justice. ACTION: Notice of Hearing. SUMMARY: The Office of Justice Programs (OJP) announces that the Review Panel on Prison Rape (Panel) will...

Estimating the Counterfactual Impact of Conservation Programs on Land Cover Outcomes: The Role of Matching and Panel Regression Techniques

PubMed Central

Jones, Kelly W.; Lewis, David J.

2015-01-01

Deforestation and conversion of native habitats continues to be the leading driver of biodiversity and ecosystem service loss. A number of conservation policies and programs are implemented—from protected areas to payments for ecosystem services (PES)—to deter these losses. Currently, empirical evidence on whether these approaches stop or slow land cover change is lacking, but there is increasing interest in conducting rigorous, counterfactual impact evaluations, especially for many new conservation approaches, such as PES and REDD, which emphasize additionality. In addition, several new, globally available and free high-resolution remote sensing datasets have increased the ease of carrying out an impact evaluation on land cover change outcomes. While the number of conservation evaluations utilizing ‘matching’ to construct a valid control group is increasing, the majority of these studies use simple differences in means or linear cross-sectional regression to estimate the impact of the conservation program using this matched sample, with relatively few utilizing fixed effects panel methods—an alternative estimation method that relies on temporal variation in the data. In this paper we compare the advantages and limitations of (1) matching to construct the control group combined with differences in means and cross-sectional regression, which control for observable forms of bias in program evaluation, to (2) fixed effects panel methods, which control for observable and time-invariant unobservable forms of bias, with and without matching to create the control group. We then use these four approaches to estimate forest cover outcomes for two conservation programs: a PES program in Northeastern Ecuador and strict protected areas in European Russia. In the Russia case we find statistically significant differences across estimators—due to the presence of unobservable bias—that lead to differences in conclusions about effectiveness. The Ecuador case illustrates that if time-invariant unobservables are not present, matching combined with differences in means or cross-sectional regression leads to similar estimates of program effectiveness as matching combined with fixed effects panel regression. These results highlight the importance of considering observable and unobservable forms of bias and the methodological assumptions across estimators when designing an impact evaluation of conservation programs. PMID:26501964

Estimating the Counterfactual Impact of Conservation Programs on Land Cover Outcomes: The Role of Matching and Panel Regression Techniques.

PubMed

Jones, Kelly W; Lewis, David J

2015-01-01

Deforestation and conversion of native habitats continues to be the leading driver of biodiversity and ecosystem service loss. A number of conservation policies and programs are implemented--from protected areas to payments for ecosystem services (PES)--to deter these losses. Currently, empirical evidence on whether these approaches stop or slow land cover change is lacking, but there is increasing interest in conducting rigorous, counterfactual impact evaluations, especially for many new conservation approaches, such as PES and REDD, which emphasize additionality. In addition, several new, globally available and free high-resolution remote sensing datasets have increased the ease of carrying out an impact evaluation on land cover change outcomes. While the number of conservation evaluations utilizing 'matching' to construct a valid control group is increasing, the majority of these studies use simple differences in means or linear cross-sectional regression to estimate the impact of the conservation program using this matched sample, with relatively few utilizing fixed effects panel methods--an alternative estimation method that relies on temporal variation in the data. In this paper we compare the advantages and limitations of (1) matching to construct the control group combined with differences in means and cross-sectional regression, which control for observable forms of bias in program evaluation, to (2) fixed effects panel methods, which control for observable and time-invariant unobservable forms of bias, with and without matching to create the control group. We then use these four approaches to estimate forest cover outcomes for two conservation programs: a PES program in Northeastern Ecuador and strict protected areas in European Russia. In the Russia case we find statistically significant differences across estimators--due to the presence of unobservable bias--that lead to differences in conclusions about effectiveness. The Ecuador case illustrates that if time-invariant unobservables are not present, matching combined with differences in means or cross-sectional regression leads to similar estimates of program effectiveness as matching combined with fixed effects panel regression. These results highlight the importance of considering observable and unobservable forms of bias and the methodological assumptions across estimators when designing an impact evaluation of conservation programs.

A research program to reduce interior noise in general aviation airplanes: Noise reduction through a cavity-backed flexible plate

NASA Technical Reports Server (NTRS)

Roskam, J.; Vandam, C. P. G.

1978-01-01

A prediction method is reported for noise reduction through a cavity-backed panel. The analysis takes into account only cavity modes in one direction. The results of this analysis were to find the effect of acoustic stiffness of a backing cavity on the panel behavior. The resulting changes in the noise reduction through the panel are significant.

A general panel sizing computer code and its application to composite structural panels

NASA Technical Reports Server (NTRS)

Anderson, M. S.; Stroud, W. J.

1978-01-01

A computer code for obtaining the dimensions of optimum (least mass) stiffened composite structural panels is described. The procedure, which is based on nonlinear mathematical programming and a rigorous buckling analysis, is applicable to general cross sections under general loading conditions causing buckling. A simplified method of accounting for bow-type imperfections is also included. Design studies in the form of structural efficiency charts for axial compression loading are made with the code for blade and hat stiffened panels. The effects on panel mass of imperfections, material strength limitations, and panel stiffness requirements are also examined. Comparisons with previously published experimental data show that accounting for imperfections improves correlation between theory and experiment.

78 FR 13346 - Medicare Program; Changes to the Semi-Annual Meeting of the Advisory Panel on Hospital Outpatient...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... (HOP Panel)--March 11 and March 12, 2013 AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS... Program; Semi-Annual Meeting of the Advisory Panel on Hospital Outpatient Payment (HOP Panel)--March 11...-annual meeting of the Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) for 2013. We note...

77 FR 48995 - Draft National Toxicology Program (NTP) Monograph on Developmental Effects and Pregnancy Outcomes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

... Program (NTP) Monograph on Developmental Effects and Pregnancy Outcomes Associated With Cancer Chemotherapy Use During Pregnancy; Request for Comments; Peer Review Panel Meeting AGENCY: Division of the... Monograph on Developmental Effects and Pregnancy Outcomes Associated with Cancer Chemotherapy Use during...

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that includes transverse shear effects and damage tolerance considerations. This method is incorporated into an optimization program called SANDOP (SANDwich OPtimization). SANDOP is used in the present study to design optimized composite sandwich cover panels for transport aircraft wing applications as a demonstration of its capabilities. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to identical constraints. Results indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and plus or minus 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density.

7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

Code of Federal Regulations, 2014 CFR

2014-01-01

... sources; (iv) Financial management system in place or proposed. The system will account for grant funds in... financial management system of the State shall provide for effective control and accountability of all funds... AGENCY, DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL System for Delivery...

Effective medical treatment of opiate addiction. National Consensus Development Panel on Effective Medical Treatment of Opiate Addiction.

PubMed

1998-12-09

To provide clinicians, patients, and the general public with a responsible assessment of the effective approaches to treat opiate dependence. A nonfederal, nonadvocate, 12-member panel representing the fields of psychology, psychiatry, behavioral medicine, family medicine, drug abuse, epidemiology, and the public. In addition, 25 experts from these same fields presented data to the panel and a conference audience of 600. Presentations and discussions were divided into 3 phases over 2 1/2 days: (1) presentations by investigators working in the areas relevant to the consensus questions during a 2-day public session; (2) questions and statements from conference attendees during open discussion periods that are part of the public session; and (3) closed deliberations by the panel during the remainder of the second day and morning of a third day. The conference was organized and supported by the Office of Medical Applications of Research, National Institutes of Health. The literature was searched through MEDLINE and other National Library of Medicine and online databases from January 1994 through September 1997 and an extensive bibliography of 941 references was provided to the panel and the conference audience. Experts prepared abstracts for their presentations as speakers at the conference with relevant citations from the literature. Scientific evidence was given precedence over clinical anecdotal experience. The panel, answering predefined questions, developed its conclusions based on the scientific evidence presented in open forum and the scientific literature. The panel composed a draft statement that was read in its entirety and circulated to the experts and the audience for comment. Thereafter, the panel resolved conflicting recommendations and released a revised statement at the end of the conference. The panel finalized the revisions within a few weeks after the conference. The draft statement was made available on the World Wide Web immediately following its release at the conference and was updated with the panel's final revisions. Opiate dependence is a brain-related medical disorder that can be effectively treated with significant benefits for the patient and society, and society must make a commitment to offer effective treatment for opiate dependence to all who need it. All persons dependent on opiates should have access to methadone hydrochloride maintenance therapy under legal supervision, and the US Office of National Drug Control Policy and the US Department of Justice should take the necessary steps to implement this recommendation. There is a need for improved training for physicians and other health care professionals. Training to determine diagnosis and treatment of opiate dependence should also be improved in medical schools. The unnecessary regulations of methadone maintenance therapy and other long-acting opiate agonist treatment programs should be reduced, and coverage for these programs should be a required benefit in public and private insurance programs.

Final Test Report: Hexavalent Chrome Free Coatings for Electronics Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2016-01-01

The test results for Salt Spray Resistance, Static Heat and Humidity and Marine Environment can be found in Sections 3.1.3.3, 3.1.4.3 and 3.1.5.3 respectively. In summary, both the Metalast TCP and SurTec 650 Type 2 conversion coatings perform very similar to the incumbent Type 1 conversion coating against both 6061 and 5052 aluminum under all three test conditions. Significant prior work was performed to select the aluminum and conversion coating included within this test cycle; Reference - NASA GSDO Program Hexavalent Chrome Alternatives Final Pretreatments Test Report Task Order: NNH12AA45D September 01, 2013. As illustrated in the data, the 6061 aluminum panels SLIGHTLY out-performed the 5052 aluminum panels. Individual shielding effectiveness graphs for each panel are included within Appendix C and D. One other notable effect found during review of the data is that the Test Panels exposed to B117 Salt Fog reduced in shielding effectiveness significantly more than the Marine Environment Test Panels. The shielding effectiveness of the Marine Test Panels was approximately 20dB higher than the Test Panels that underwent B117 Salt Fog Exposure. The intent of this evaluation was not to maximize shielding effectiveness values. The same Parker Chomerics Cho-Seal 6503 gasket material was used for all panels with aluminum and conversion coating variants. A typical EMI gasket design for corrosive environments would be done quite differently. The intent was to execute a test that would provide the best possible evaluation of different aluminum materials and conversion coatings in corrosive environments. The test program achieved this intent. The fact that the two aluminums and two Type II conversion coatings performed similar to the incumbent Type 1 conversion coating is a positive outcome. It was desired to have an outcome that further differentiation the performance of two aluminum types and two conversion coating types but this could not be extracted by the test results. Further analysis of the test plates may be done by X-Ray Photoelectron Spectroscopy (XPS) or Electrochemical Impedance Spectroscopy (EIS). Feasibility of this is under review.

Using advertisement light-panel and CMOS image sensor with frequency-shift-keying for visible light communication.

PubMed

Chow, Chi-Wai; Shiu, Ruei-Jie; Liu, Yen-Chun; Liao, Xin-Lan; Lin, Kun-Hsien; Wang, Yi-Chang; Chen, Yi-Yuan

2018-05-14

A frequency-shift-keying (FSK) visible light communication (VLC) system is proposed and demonstrated using advertisement light-panel as transmitter and mobile-phone image sensor as receiver. The developed application program (APP) in mobile-phone can retrieve the rolling shutter effect (RSE) pattern produced by the FSK VLC signal effectively. Here, we also define noise-ratio value (NRV) to evaluate the contrast of different advertisements displayed on the light-panel. Both mobile-phones under test can achieve success rate > 96% even when the transmission distance is up to 200 cm and the NRVs are low.

76 FR 71023 - FIFRA Scientific Advisory Panel; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... Panel (FIFRA SAP) to consider and review Common Effects Assessment Methodology developed in the Office of Pesticide Programs and Office of Water. DATES: The meeting will be held on January 31, 2012 to... Web site is an ``anonymous access'' system, which means EPA will not know your identity or contact...

Effects of full-facility variable tolling on traveler behavior : evidence from a panel study of the SR-520 corridor in Seattle.

DOT National Transportation Integrated Search

2014-10-01

This paper uses a two-stage panel survey approach, with roughly 2,000 respondent households, to analyze the impacts of a federally sponsored variable tolling program on SR-520 in the Seattle region. The focus is on corridor users daily travel choi...

76 FR 14372 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... DEPARTMENT OF AGRICULTURE Forest Service New Mexico Collaborative Forest Restoration Program Technical Advisory Panel AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The New Mexico Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The...

Multi-objective optimal design of sandwich panels using a genetic algorithm

NASA Astrophysics Data System (ADS)

Xu, Xiaomei; Jiang, Yiping; Pueh Lee, Heow

2017-10-01

In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.

Aerospace safety advisory panel

NASA Technical Reports Server (NTRS)

1994-01-01

This report from the Aerospace Safety Advisory Panel (ASAP) contains findings, recommendations, and supporting material concerning safety issues with the space station program, the space shuttle program, aeronautics research, and other NASA programs. Section two presents findings and recommendations, section three presents supporting information, and appendices contain data about the panel membership, the NASA response to the March 1993 ASAP report, and a chronology of the panel's activities during the past year.

76 FR 56481 - Hearings of the Review Panel on Prison Rape

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... Review Panel on Prison Rape AGENCY: Office of Justice Programs, Justice. ACTION: Notice of hearing. SUMMARY: The Office of Justice Programs (OJP) announces that the Review Panel on Prison Rape (Panel) will... Law School; David L. Moss Criminal Justice Center (Tulsa, OK)--facility with a low prevalence of...

77 FR 1743 - U.S. Antarctic Program Blue Ribbon Panel; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... NATIONAL SCIENCE FOUNDATION U.S. Antarctic Program Blue Ribbon Panel; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended), the National Science Foundation announces the following meeting: Name: U.S. Antarctic Program Blue Ribbon Panel Review, 76826. Date/Time...

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

75 FR 2545 - National Toxicology Program (NTP); Center for the Evaluation of Risks to Human Reproduction...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... infants, and (3) public concern for effects on infant or child development. Following receipt of public... whether exposure to soy infant formula is a hazard to human development. The expert panel also identified... Expert Panel Report on Soy Infant Formula; Request for Public Comment AGENCY: National Institute of...

Effects of an HOV-2 to HOT-3 conversion on traveler behavior : evidence from a panel study of the I-85 corridor in Atlanta.

DOT National Transportation Integrated Search

2014-04-01

This paper uses a two-stage panel survey approach, with roughly 1,600 respondent : households, to analyze the impacts of a federally sponsored variable tolling : program on the I-85 corridor northeast of Atlanta. The focus is on corridor : users d...

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 1: Theory document (version 1.1)

NASA Technical Reports Server (NTRS)

Magnus, A. E.; Epton, M. A.

1981-01-01

Panel aerodynamics (PAN AIR) is a system of computer programs designed to analyze subsonic and supersonic inviscid flows about arbitrary configurations. A panel method is a program which solves a linear partial differential equation by approximating the configuration surface by a set of panels. An overview of the theory of potential flow in general and PAN AIR in particular is given along with detailed mathematical formulations. Fluid dynamics, the Navier-Stokes equation, and the theory of panel methods were also discussed.

76 FR 78281 - Medicare Program; First Semi-Annual Meeting of the Advisory Panel on Hospital Outpatient Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services [CMS-1586-N] Medicare Program; First Semi-Annual Meeting of the Advisory Panel on Hospital Outpatient Payment (HOP--Formerly Known as the Advisory Panel on Ambulatory Payment Classification Groups--APC Panel)--February 27...

77 FR 9707 - U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

... NATIONAL SCIENCE FOUNDATION U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended), the National Science Foundation announces the following meeting: Name: U.S. Antarctic Program Blue Ribbon Panel Review, 76826. Date/Time...

76 FR 63329 - U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... NATIONAL SCIENCE FOUNDATION U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended), the National Science Foundation announces the following meeting: Name: U.S. Antarctic Program Blue Ribbon Panel Review (76826). Date/Time...

77 FR 20852 - U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... NATIONAL SCIENCE FOUNDATION U.S. Antarctic Program Blue Ribbon Panel Review; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended), the National Science Foundation announces the following meeting: Name: U.S. Antarctic Program Blue Ribbon Panel Review, 76826. Date/Time...

GaAs/Ge solar panels for the SAMPEX program

NASA Technical Reports Server (NTRS)

Dobson, Rodney; Kukulka, Jerry; Dakermanji, George; Roufberg, Lew; Ahmad, Anisa; Lyons, John

1992-01-01

GaAs based solar cells have been developed for spacecraft use for several years. However, acceptance and application of these cells for spacecraft missions has been slow because of their high cost and concerns about their integration onto solar panels. Spectrolab has now completed fabrication of solar panels with GaAs/Ge solar cells for a second space program. This paper will focus on the design, fabrication and test of GaAs/Ge solar panels for the Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) Program.

75 FR 76468 - Office of the Assistant Secretary for Planning and Evaluation; Medicare Program; Meeting of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... Evaluation; Medicare Program; Meeting of the Technical Advisory Panel on Medicare Trustee Reports AGENCY... announces a public meeting of the Technical Advisory Panel on Medicare Trustee Reports (Panel). Notice of... long run. The Panel's discussion is expected to be very technical in nature and will focus on the...

77 FR 26553 - Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel-May 21, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

...] Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel--May 21, 2012 AGENCY... announces that a public meeting of the Medicare Economic Index Technical Advisory Panel (``the Panel'') will... Economic Index (MEI). This first meeting will focus on MEI inputs and input weights. This meeting is open...

Fabrication methods for YF-12 wing panels for the Supersonic Cruise Aircraft Research Program

NASA Technical Reports Server (NTRS)

Hoffman, E. L.; Payne, L.; Carter, A. L.

1975-01-01

Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Aircraft Research (SCAR) Program. With Lockheed-ADP as the prime contractor, full-scale structural panels are being designed and fabricated to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program involves ground testing and Mach 3 flight testing of full-scale structural panels and laboratory testing of representative structural element specimens. Fabrication methods and test results for weldbrazed and Rohrbond titanium panels are discussed. The fabrication methods being developed for boron/aluminum, Borsic/aluminum, and graphite/polyimide panels are also presented.

Stanol esters as a component of maximal dietary therapy in the National Cholesterol Education Program Adult Treatment Panel III report.

PubMed

Grundy, Scott M

2005-07-04

Use of plant stanols/sterols in forms that are sufficiently bioavailable for therapeutic effect should be a key element of maximal dietary therapy. This principle was recognized by National Cholesterol Education Program (NCEP) Adult Treatment Panel III (ATP III) and has been amply confirmed by experimental studies in humans. Since the introduction of statins, dietary therapy for control of elevated low-density lipoprotein (LDL) cholesterol levels has received less attention. The time has come, however, to reassert the importance of maximal dietary therapy as a cost-effective means for treatment of elevated LDL concentrations and for lifetime prevention of coronary heart disease.

A research program to reduce interior noise in general aviation airplanes. [test methods and results

NASA Technical Reports Server (NTRS)

Roskam, J.; Muirhead, V. U.; Smith, H. W.; Peschier, T. D.; Durenberger, D.; Vandam, K.; Shu, T. C.

1977-01-01

Analytical and semi-empirical methods for determining the transmission of sound through isolated panels and predicting panel transmission loss are described. Test results presented include the influence of plate stiffness and mass and the effects of pressurization and vibration damping materials on sound transmission characteristics. Measured and predicted results are presented in tables and graphs.

The School Breakfast Program and Breakfast Consumption. Discussion Paper No. 1360-08

ERIC Educational Resources Information Center

Waehrer, Geetha M.

2008-01-01

This paper analyzes the effect of participation in the School Breakfast Program (SBP) on breakfast consumption using time-diary data from the Child Development Supplement of the Panel Study of Income Dynamics. Participation effects are identified by comparing differences in breakfast patterns between weekdays (when children are in school) and…

Production of aluminum-lithium near net shape extruded cylinders

NASA Technical Reports Server (NTRS)

Hartley, Paula J.

1995-01-01

In the late 1980's, under funding from the Advanced Launch System Program, numerous near net shape technologies were investigated as a means for producing high quality, low cost Aluminum-Lithium (Al-Li) hardware. Once such option was to extrude near net shape barrel panels instead of producing panels by machining thick plate into a final tee-stiffened configuration (which produced up to 90% scrap). This method offers a reduction in the volume of scrap and consequently reduces the buy-to-fly cost. Investigation into this technology continued under Shuttle-C funding where four Al alloys 2219, 2195, 2096, and RX 818 were extruded. Presented herein are the results of that program. Each alloy was successfully extruded at Wyman Gordon, opened and flattened at Ticorm, and solution heat treated and stretched at Reynolds Metals Company. The first two processes were quite successful while the stretching process did offer some challenges. Due to the configuration of the panels and the stretch press set-up, it was difficult to induce a consistent percentage of cold work throughout the length and width of each panel. The effects of this variation will be assessed in the test program to be conducted at a future date.

IMPLICATIONS OF PARTICULATE MATTER RESEARCH PROGRAM UPON EXPOSURE ASSESSMENT AND APPORTIONMENT AND ATTRIBUTION OF ENVIRONMENTAL EFFECTS

EPA Science Inventory

Recent personal exposure panel studies and monitoring programs addressing fine particulate matter (PM) and associated co-pollutants have elucidated the physical and statistical relationships between personal exposures, residential indoor concentrations (and sources), concentratio...

Combined Loads Test Fixture for Thermal-Structural Testing Aerospace Vehicle Panel Concepts

NASA Technical Reports Server (NTRS)

Fields, Roger A.; Richards, W. Lance; DeAngelis, Michael V.

2004-01-01

A structural test requirement of the National Aero-Space Plane (NASP) program has resulted in the design, fabrication, and implementation of a combined loads test fixture. Principal requirements for the fixture are testing a 4- by 4-ft hat-stiffened panel with combined axial (either tension or compression) and shear load at temperatures ranging from room temperature to 915 F, keeping the test panel stresses caused by the mechanical loads uniform, and thermal stresses caused by non-uniform panel temperatures minimized. The panel represents the side fuselage skin of an experimental aerospace vehicle, and was produced for the NASP program. A comprehensive mechanical loads test program using the new test fixture has been conducted on this panel from room temperature to 500 F. Measured data have been compared with finite-element analyses predictions, verifying that uniform load distributions were achieved by the fixture. The overall correlation of test data with analysis is excellent. The panel stress distributions and temperature distributions are very uniform and fulfill program requirements. This report provides details of an analytical and experimental validation of the combined loads test fixture. Because of its simple design, this unique test fixture can accommodate panels from a variety of aerospace vehicle designs.

The impact of health insurance programs on out-of-pocket expenditures in Indonesia: an increase or a decrease?

PubMed

Aji, Budi; De Allegri, Manuela; Souares, Aurelia; Sauerborn, Rainer

2013-07-18

We used panel data from the Indonesian Family Life Survey to investigate the impact of health insurance programs on reducing out-of-pocket expenditures. We employed three linear panel data models, two of which accounted for endogeneity: pooled ordinary least squares (OLS), pooled two-stage least squares (2SLS) for instrumental variable (IV), and fixed effects (FE). The study revealed that two health insurance programs had a significantly negative impact on out-of-pocket expenditures by using IV estimates. In the IV model, Askeskin decreased out-of-pocket expenditures by 34% and Askes by 55% compared with non-Askeskin and non-Askes, respectively, while Jamsostek was found to bear a nonsignificant effect on out-of-pocket expenditures. In the FE model, only Askeskin had a significant negative effect with an 11% reduction on out-of-pocket expenditures. This study showed that two large existing health insurance programs in Indonesia, Askeskin and Askes, effectively reduced household out-of-pocket expenditures. The ability of programs to offer financial protection by reducing out-of-pocket expenditures is likely to be a direct function of their benefits package and co-payment policies.

The Impact of Health Insurance Programs on Out-of-Pocket Expenditures in Indonesia: An Increase or a Decrease?

PubMed Central

Aji, Budi; De Allegri, Manuela; Souares, Aurelia; Sauerborn, Rainer

2013-01-01

We used panel data from the Indonesian Family Life Survey to investigate the impact of health insurance programs on reducing out-of-pocket expenditures. We employed three linear panel data models, two of which accounted for endogeneity: pooled ordinary least squares (OLS), pooled two-stage least squares (2SLS) for instrumental variable (IV), and fixed effects (FE). The study revealed that two health insurance programs had a significantly negative impact on out-of-pocket expenditures by using IV estimates. In the IV model, Askeskin decreased out-of-pocket expenditures by 34% and Askes by 55% compared with non-Askeskin and non-Askes, respectively, while Jamsostek was found to bear a nonsignificant effect on out-of-pocket expenditures. In the FE model, only Askeskin had a significant negative effect with an 11% reduction on out-of-pocket expenditures. This study showed that two large existing health insurance programs in Indonesia, Askeskin and Askes, effectively reduced household out-of-pocket expenditures. The ability of programs to offer financial protection by reducing out-of-pocket expenditures is likely to be a direct function of their benefits package and co-payment policies. PMID:23873263

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Streeter, B.; Koontz, S.; Roskam, J.

1981-01-01

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies.

Improvement in the performance of external quality assessment in Korean HIV clinical laboratories using unrecalcified human plasma.

PubMed

Wang, Jin-Sook; Kee, Mee-Kyung; Choi, Byeong-Sun; Kim, Chan-Wha; Kim, Hyon-Suk; Kim, Sung Soon

2012-01-01

The external quality assessment schemes (EQAS) organizer provides a suitable program to monitor and improve the quality of human immunodeficiency virus (HIV) testing laboratories with EQAS panels prepared under various conditions. The aim of the current study was to investigate the effects of human plasma samples on the EQAS results of HIV obtained from hospital-based clinical laboratories. From 2007 to 2009, HIV EQAS panels consisted of four to six samples that consisted of undiluted positive and negative samples and were provided to laboratories twice per year. Up until the first half EQAS in 2008, EQAS panel materials were obtained by converting acid citrate dextrose treated plasma to serum via chemical treatment with CaCl2. Beginning with the second EQAS in 2008, all materials were prepared without the defibrination process. Approximately 300 HIV clinical laboratories participated in this program. The overall performance of clinical laboratories was shown to be improved when using unrecalcified plasma panels compared with recalcified panels. Significant differences were observed in EIA analyses of plasma for both positive (p<0.001) and negative (p<0.001) samples between the recalcified and unrecalcified groups. Our finding suggested that defibrination status of EQAS panels might affect the results of anti-HIV EQAS of Korean HIV testing laboratories.

75 FR 81315 - Earth Sciences Proposal Review Panel; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... NATIONAL SCIENCE FOUNDATION Earth Sciences Proposal Review Panel; Notice of Meeting In accordance... announces the following meeting. Name: Proposal Review Panel in Earth Sciences (1569). Date and Time... Kelz, Program Director, Instrumentation & Facilities Program, Division of Earth Sciences, Room 785...

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 2; 6-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Meyers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Dixon, Genevieve D.

2013-01-01

Four honeycomb sandwich panel types, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle (HLLV), were manufactured and tested under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center (LaRC). Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3- by 5-ft panel. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panels composed of 6-ply, IM7/977-3 facesheets (referred to as Panels B-1 and B-2). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional (3-D) effects on the compressive response of the panel.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel Part 1: 8-Ply In-Autoclave Facesheets. Part 1; 8-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Myers, David E.; Pineda, Evan J.; Zalewski, Bart F.; Kosareo, Daniel N.; Kellas, Sotiris

2013-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Space Launch Systems program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3.00- by 5.00-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analysis was performed to predict the compressive response of the 3.00- by 5.00-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, IM7/977-3 facesheets (referred to Panel A). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber misalignments, and three-dimensional (3 D) effects on the compressive response of the panel.

7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 13 2013-01-01 2013-01-01 false Rural Economic Development Review Panel Grant (Panel... of Certain Rural Development Programs § 1940.968 Rural Economic Development Review Panel Grant (Panel... associated with a State rural economic development review panel. (b) Objective. The objective of the Panel...

Comprehensive review of the evidence regarding the effectiveness of community-based primary health care in improving maternal, neonatal and child health: 8. summary and recommendations of the Expert Panel.

PubMed

Black, Robert E; Taylor, Carl E; Arole, Shobha; Bang, Abhay; Bhutta, Zulfiqar A; Chowdhury, A Mushtaque R; Kirkwood, Betty R; Kureshy, Nazo; Lanata, Claudio F; Phillips, James F; Taylor, Mary; Victora, Cesar G; Zhu, Zonghan; Perry, Henry B

2017-06-01

The contributions that community-based primary health care (CBPHC) and engaging with communities as valued partners can make to the improvement of maternal, neonatal and child health (MNCH) is not widely appreciated. This unfortunate reality is one of the reasons why so few priority countries failed to achieve the health-related Millennium Development Goals by 2015. This article provides a summary of a series of articles about the effectiveness of CBPHC in improving MNCH and offers recommendations from an Expert Panel for strengthening CBPHC that were formulated in 2008 and have been updated on the basis of more recent evidence. An Expert Panel convened to guide the review of the effectiveness of community-based primary health care (CBPHC). The Expert Panel met in 2008 in New York City with senior UNICEF staff. In 2016, following the completion of the review, the Panel considered the review's findings and made recommendations. The review consisted of an analysis of 661 unique reports, including 583 peer-reviewed journal articles, 12 books/monographs, 4 book chapters, and 72 reports from the gray literature. The analysis consisted of 700 assessments since 39 were analyzed twice (once for an assessment of improvements in neonatal and/or child health and once for an assessment in maternal health). The Expert Panel recommends that CBPHC should be a priority for strengthening health systems, accelerating progress in achieving universal health coverage, and ending preventable child and maternal deaths. The Panel also recommends that expenditures for CBPHC be monitored against expenditures for primary health care facilities and hospitals and reflect the importance of CBPHC for averting mortality. Governments, government health programs, and NGOs should develop health systems that respect and value communities as full partners and work collaboratively with them in building and strengthening CBPHC programs - through engagement with planning, implementation (including the full use of community-level workers), and evaluation. CBPHC programs need to reach every community and household in order to achieve universal coverage of key evidence-based interventions that can be implemented in the community outside of health facilities and assure that those most in need are reached. Stronger CBPHC programs that foster community engagement/empowerment with the implementation of evidence-based interventions will be essential for achieving universal coverage of health services by 2030 (as called for by the Sustainable Development Goals recently adopted by the United Nations), ending preventable child and maternal deaths by 2030 (as called for by the World Health Organization, UNICEF, and many countries around the world), and eventually achieving Health for All as envisioned at the International Conference on Primary Health Care in 1978. Stronger CBPHC programs can also create entry points and synergies for expanding the coverage of family planning services as well as for accelerating progress in the detection and treatment of HIV/AIDS, tuberculosis, malaria, hypertension, and other chronic diseases. Continued strengthening of CBPHC programs based on rigorous ongoing operations research and evaluation will be required, and this evidence will be needed to guide national and international policies and programs.

A Randomized, Controlled Trial of a Shared Panel Management Program for Small Practices.

PubMed

Bishop, Tara F; Ryan, Andrew M; Chen, Melinda A; Mendelsohn, Jayme; Gottlieb, Daniel; Shih, Sarah; Desai, Priya; Wolff, Elizabeth A; Casalino, Lawrence P

2016-10-01

To determine whether a shared panel management program was effective at improving quality of care for patients with uncontrolled chronic disease. Data were extracted from electronic health records. Randomized controlled trial of a panel management program initiated by New York City Department of Health and Mental Hygiene. Patients from 20 practices with an uncontrolled chronic disease and a lapse in care were assigned to the intervention (a phone call requesting that the patient schedule a physician appointment) or usual care. Outcomes were visits to physician practices, body mass index measurement, blood pressure measurement and control, use of antithrombotics, and low-density lipoprotein measurement and control. Panel managers were able to successfully speak with 1,676 patients (14.7 percent of the intervention group). There were no significant differences in outcomes between the intervention and usual care groups. Successfully contacted patients were more likely to have an office visit within 1 year of randomization (45.6 percent [95 percent CI: 22.8, 26.9] vs. 38.1 percent [95 percent CI: 36.8, 39.3]) and more likely to be on antithrombotics (24.4 percent [95 percent CI: 17.7, 31.0]) versus those in the usual care group (17.0 percent [95 percent CI: 13.9, 20.0]) but had no other difference in quality. A shared, low-intensity panel management program run by a city health department did not improve quality of care for patients with chronic illnesses and lapses in care. © Health Research and Educational Trust.

PASHA: facilitating the replication and use of effective adolescent pregnancy and STI/HIV prevention programs.

PubMed

Card, Josefina J; Lessard, Laura; Benner, Tabitha

2007-03-01

It is important that interventions that have been shown effective in changing risky behavior be disseminated, so that they can be replicated (implemented in a new site) and so that their effectiveness in a new setting can be investigated. This article provides an update on an innovative resource for promoting the replication of effective teen pregnancy and STI/HIV prevention programs. The resource is called the Program Archive on Sexuality, Health & Adolescence (PASHA). A Scientist Expert Panel rates candidate adolescent pregnancy and STI/HIV prevention programs based on the strength of the evidence of their effectiveness in changing risky sexual behavior among youth ages 10-19 (10-21 for STI/HIV prevention programs). Developers of selected programs are invited to make their program and evaluation materials publicly available through PASHA. PASHA publishes and disseminates replication kits for programs it successfully acquires. Fifty-six programs have been selected by PASHA's Scientist Expert Panel as "effective" in changing one or more risky behaviors associated with adolescent pregnancy or STI/HIV. Complete program and evaluation materials from 35 of these programs are now currently available through PASHA, five are pending, 12 are publicly available from other sources, and only four are not publicly available. PASHA programs are aimed at a diverse target population and cover diverse content on many abstinence and contraception/condom-related topics. Many pedagogical techniques are used to effect behavior change, noticeably role play and group discussion. PASHA illustrates well the productive research-to-practice feedback loop that is the backbone of "translation research." The resource can be used by adolescent pregnancy and STI/HIV prevention practitioners to put what works to work to continue the lowering of the nation's adolescent pregnancy and STI/HIV rates.

Loading tests of a wing structure for a hypersonic aircraft

NASA Technical Reports Server (NTRS)

Fields, R. A.; Reardon, L. F.; Siegel, W. H.

1980-01-01

Room-temperature loading tests were conducted on a wing structure designed with a beaded panel concept for a Mach 8 hypersonic research airplane. Strain, stress, and deflection data were compared with the results of three finite-element structural analysis computer programs and with design data. The test program data were used to evaluate the structural concept and the methods of analysis used in the design. A force stiffness technique was utilized in conjunction with load conditions which produced various combinations of panel shear and compression loading to determine the failure envelope of the buckling critical beaded panels The force-stiffness data did not result in any predictions of buckling failure. It was, therefore, concluded that the panels were conservatively designed as a result of design constraints and assumptions of panel eccentricities. The analysis programs calculated strains and stresses competently. Comparisons between calculated and measured structural deflections showed good agreement. The test program offered a positive demonstration of the beaded panel concept subjected to room-temperature load conditions.

77 FR 9255 - Medicare Program: Notice of Six Membership Appointments to the Advisory Panel on Hospital...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... Panel on Hospital Outpatient Payment (HOP, the Panel). The six appointments to the 19 member Panel will... Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) is governed by the provisions of the Federal...

Project STOP (Spectral Thermal Optimization Program)

NASA Technical Reports Server (NTRS)

Goldhammer, L. J.; Opjorden, R. W.; Goodelle, G. S.; Powe, J. S.

1977-01-01

The spectral thermal optimization of solar cell configurations for various solar panel applications is considered. The method of optimization depends upon varying the solar cell configuration's optical characteristics to minimize panel temperatures, maximize power output and decrease the power delta from beginning of life to end of life. Four areas of primary investigation are: (1) testing and evaluation of ultraviolet resistant coverslide adhesives, primarily FEP as an adhesive; (2) examination of solar cell absolute spectral response and corresponding cell manufacturing processes that affect it; (3) experimental work with solar cell manufacturing processes that vary cell reflectance (solar absorptance); and (4) experimental and theoretical studies with various coverslide filter designs, mainly a red rejection filter. The Hughes' solar array prediction program has been modified to aid in evaluating the effect of each of the above four areas on the output of a solar panel in orbit.

78 FR 7434 - Medicare Program: Notice of Two Membership Appointments to the Advisory Panel on Hospital...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... Panel on Hospital Outpatient Payment (HOP, the Panel). The two new appointments to the Panel will each... Classification groups and weights. The Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) is governed... members to the Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) to fill two vacancies on the...

The National Shipbuilding Research Program. National Workshop (4th) on Human Resource Innovation in Shipbuilding and Ship Repair

DTIC Science & Technology

1995-11-01

SHIP PRODUCTION COMMITTEE FACILITIES AND ENVIRONMENTAL EFFECTS SURFACE PREPARATION AND COATINGS DESIGN/PRODUCTION INTEGRATION HUMAN RESOURCE...we’re all about. 2 Exhibit 1 NATIONAL SHIPBUILDING RESEARCH PROGRAM RESEARCH PANELS SP-1 Facilities and Environmental Effects SP-3 Surface... effectively compete in the international commercial shipbuilding market. On November 30,1993, President Clinton signed into law the National

LEA Title VII Program Evaluations. Panel Presentations.

ERIC Educational Resources Information Center

Balu, Raj

These panel presentations focus on LEA Title VII Program Evaluations. Raj Balu, an administrator of bilingual programs in Chicago presents information regarding the bilingual education program in the Chicago public schools, as well as information on Title VII programs and what kind of evaluation is being done. Jesus Salazar, who is currently…

User's manual for interfacing a leading edge, vortex rollup program with two linear panel methods

NASA Technical Reports Server (NTRS)

Desilva, B. M. E.; Medan, R. T.

1979-01-01

Sufficient instructions are provided for interfacing the Mangler-Smith, leading edge vortex rollup program with a vortex lattice (POTFAN) method and an advanced higher order, singularity linear analysis for computing the vortex effects for simple canard wing combinations.

75 FR 3942 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-25

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance..., Proposal Review Panel for Chemistry, 1191. Dates & Times: February 23, 2010; 8:30 a.m.-4:30 p.m. February... Brittain, Program Director, Chemistry Centers Program, Division of Materials Research, Room 1055, National...

Prices of unhealthy foods, Food Stamp Program participation, and body weight status among U.S. low-income women.

PubMed

Zhang, Qi; Chen, Zhuo; Diawara, Norou; Wang, Youfa

2011-06-01

This paper examines the interactive effect between the price of unhealthy foods and Food Stamp Program participation on body weight status among low-income women in the United States. We merged the panel data of the National Longitudinal Survey of Youth 1979 cohort in 1985-2002 and the Cost of Living Index data compiled by the American Chamber of Commerce Researchers Association by using geographic identifiers. Using the merged data, we used panel econometric models to examine the impact of unhealthy food prices on the food stamp-eligible U.S. population. Our results indicate that higher prices for unhealthy food can partially offset the positive association between Food Stamp Program participation and bodyweight among low-income women.

A study of the structural-acoustic response and interior noise levels of fuselage structures

NASA Technical Reports Server (NTRS)

Koval, L. R.

1978-01-01

Models of both flat and curved fuselage panels were tested for their sound transmission characteristics. The effect of external air flow on transmission loss was simulated in a subsonic wind-tunnel. By numerically evaluating the known equations for field-incidence transmission loss of single-walled panels in a computer program, a comparison of the theory with the test results was made. As a further extension to aircraft fuselage simulation, equations for the field-incidence transmission loss of a double-walled panel were derived. Flow is shown to provide a small increase in transmission loss for a flat panel. Curvature is shown to increase transmission loss for low frequencies, while also providing a sharp decrease in transmission loss at the ring frequency of the cylindrical panel. The field-incidence transmission loss of a double-walled panel was found to be approximately twice that for a single-walled panel, with the addition of dips in the transmission loss at the air gap resonances and at the critical frequency of the internal panel.

A computer model of solar panel-plasma interactions

NASA Technical Reports Server (NTRS)

Cooke, D. L.; Freeman, J. W.

1980-01-01

High power solar arrays for satellite power systems are presently being planned with dimensions of kilometers, and with tens of kilovolts distributed over their surface. Such systems face many plasma interaction problems, such as power leakage to the plasma, particle focusing, and anomalous arcing. These effects cannot be adequately modeled without detailed knowledge of the plasma sheath structure and space charge effects. Laboratory studies of 1 by 10 meter solar array in a simulated low Earth orbit plasma are discussed. The plasma screening process is discussed, program theory is outlined, and a series of calibration models is presented. These models are designed to demonstrate that PANEL is capable of accurate self consistant space charge calculations. Such models include PANEL predictions for the Child-Langmuir diode problem.

Population Growth: Family Planning Programs.

ERIC Educational Resources Information Center

Doberenz, Alexander R., Ed.; Taylor, N. Burwell G., Ed.

These proceedings of the second annual symposium on population growth bring together speeches and panel discussions on family planning programs. Titles of speeches delivered are: Communicating Family Planning (Mrs. Jean Hutchinson); Effects of New York's Abortion Law Change (Dr. Walter Rogers); The Law and Birth Control, Sterilization and Abortion…

Findings from a Multi-Year Scale-Up Effectiveness Trial of Open-Court Reading (Imagine It!)

ERIC Educational Resources Information Center

Vaden-Kiernan, Michael; Borman, Geoffrey; Caverly, Sarah; Bell, Nance; de Castilla, Veronica Ruiz; Sullivan, Kate; Fleming, Grace

2016-01-01

This study addresses the effectiveness of a widely used core reading program that reflects the research-based practices recommended by the National Reading Panel. This and other similar programs are increasingly used to prevent reading difficulties and ensure that all children are reading at or above grade level by the end of third grade.…

Preliminary Findings from a Multi-Year Scale-Up Effectiveness Trial of Open-Court Reading (Imagine It!)

ERIC Educational Resources Information Center

Borman, Geoffrey; Vaden-Kiernan, Michael; Caverly, Sarah; Bell, Nance; de Castilla, Veronica Ruiz; Sullivan, Kate

2015-01-01

This study addresses the effectiveness of a nationally used core reading program that reflects the research-based practices recommended by the National Reading Panel. This and other similar programs are increasingly used to prevent reading difficulties and ensure that all children are reading at or above grade level by the end of third grade. The…

Evaluation of the fuselage lap joint fatigue and terminating action repair

NASA Technical Reports Server (NTRS)

Samavedam, Gopal; Thomson, Douglas; Jeong, David Y.

1994-01-01

Terminating action is a remedial repair which entails the replacement of shear head countersunk rivets with universal head rivets which have a larger shank diameter. The procedure was developed to eliminate the risk of widespread fatigue damage (WFD) in the upper rivet row of a fuselage lap joint. A test and evaluation program has been conducted by Foster-Miller, Inc. (FMI) to evaluate the terminating action repair of the upper rivet row of a commercial aircraft fuselage lap splice. Two full scale fatigue tests were conducted on fuselage panels using the growth of fatigue cracks in the lap joint. The second test was performed to evaluate the effectiveness of the terminating action repair. In both tests, cyclic pressurization loading was applied to the panels while crack propagation was recorded at all rivet locations at regular intervals to generate detailed data on conditions of fatigue crack initiation, ligament link-up, and fuselage fracture. This program demonstrated that the terminating action repair substantially increases the fatigue life of a fuselage panel structure and effectively eliminates the occurrence of cracking in the upper rivet row of the lap joint. While high cycle crack growth was recorded in the middle rivet row during the second test, failure was not imminent when the test was terminated after cycling to well beyond the service life. The program also demonstrated that the initiation, propagation, and linkup of WFD in full-scale fuselage structures can be simulated and quantitatively studied in the laboratory. This paper presents an overview of the testing program and provides a detailed discussion of the data analysis and results. Crack distribution and propagation rates and directions as well as frequency of cracking are presented for both tests. The progression of damage to linkup of adjacent cracks and to eventual overall panel failure is discussed. In addition, an assessment of the effectiveness of the terminating action repair and the occurrence of cracking in the middle rivet row is provided, and conclusions of practical interest are drawn.

Outreach Opportunities for Early Career Scientists at the Phoenix ComiCon

NASA Astrophysics Data System (ADS)

Horodyskyj, L.; Walker, S. I.; Forrester, J. H.

2014-12-01

The Phoenix ComiCon (PCC) is a rapidly growing annual four-day pop culture event, featuring guests, costuming, exhibits, and discussion panels for popular sci-fi, fantasy, horror, and anime franchises. In 2013, PCC began experimenting with science discussion panels. The popularity of the science programming resulted in an expansion of the track for 2014, which Horodyskyj was responsible for coordinating. Thirty hours of programming were scheduled, including 25 discussion panels, NASA's FameLab, and a Mars room. Panelists included industry specialists, established scientists, STEM outreach enthusiasts, and early career scientists. The majority of the panelists were early career scientists recruited from planetary sciences and biology departments at ASU and UA. Panel topics included cosmology, biotechnology, artificial intelligence, space exploration, astrobiology, and the cross-linkages of each with pop culture. Formats consisted of Q&A, presentations, and interactive game shows. Although most panels were aimed at the general audience, some panels were more specialized. PCC 2014 attracted 77,818 attendees. The science programming received rave reviews from the audience, the PCC management, and the panelists themselves. Many panel rooms were filled to capacity and required crowd control to limit attendance. We observed the formation of science "groupies" who sought out the science panels exclusively and requested more information on other science public events in the Phoenix area. We distributed surveys to several select sessions to evaluate audience reasons for attending the science panels and their opinion of the scientists they observed. We will present the results of these surveys. As the PCC continues to grow at an exponential rate, the science programming will continue to expand. We will discuss ideas for continued expansion of the PCC science programming both to serve the public and as a unique public outreach opportunity for early career scientists.

Monte Carlo ray-tracing simulations of luminescent solar concentrators for building integrated photovoltaics

NASA Astrophysics Data System (ADS)

Leow, Shin Woei; Corrado, Carley; Osborn, Melissa; Carter, Sue A.

2013-09-01

Luminescent solar concentrators (LSCs) have the ability to receive light from a wide range of angles, concentrating the captured light onto small photo active areas. This enables greater incorporation of LSCs into building designs as windows, skylights and wall claddings in addition to rooftop installations of current solar panels. Using relatively cheap luminescent dyes and acrylic waveguides to effect light concentration onto lesser photovoltaic (PV) cells, there is potential for this technology to approach grid price parity. We employ a panel design in which the front facing PV cells collect both direct and concentrated light ensuring a gain factor greater than one. This also allows for flexibility in determining the placement and percentage coverage of PV cells during the design process to balance reabsorption losses against the power output and level of light concentration desired. To aid in design optimization, a Monte-Carlo ray tracing program was developed to study the transport of photons and loss mechanisms in LSC panels. The program imports measured absorption/emission spectra and transmission coefficients as simulation parameters with interactions of photons in the panel determined by comparing calculated probabilities with random number generators. LSC panels with multiple dyes or layers can also be simulated. Analysis of the results reveals optimal panel dimensions and PV cell layouts for maximum power output for a given dye concentration, absorbtion/emission spectrum and quantum efficiency.

Innovation in values based public health nursing student selection: A qualitative evaluation of candidate and selection panel member perspectives.

PubMed

McGraw, Caroline; Abbott, Stephen; Brook, Judy

2018-02-19

Values based recruitment emerges from the premise that a high degree of value congruence, or the extent to which an individual's values are similar to those of the health organization in which they work, leads to organizational effectiveness. The aim of this evaluation was to explore how candidates and selection panel members experienced and perceived innovative methods of values based public health nursing student selection. The evaluation was framed by a qualitative exploratory design involving semi-structured interviews and a group exercise. Data were thematically analyzed. Eight semi-structured interviews were conducted with selection panel members. Twenty-two successful candidates took part in a group exercise. The use of photo elicitation interviews and situational judgment questions in the context of selection to a university-run public health nursing educational program was explored. While candidates were ambivalent about the use of photo elicitation interviews, with some misunderstanding the task, selection panel members saw the benefits for improving candidate expression and reducing gaming and deception. Situational interview questions were endorsed by candidates and selection panel members due to their fidelity to real-life problems and the ability of panel members to discern value congruence from candidates' responses. Both techniques offered innovative solutions to candidate selection for entry to the public health nursing education program. © 2018 Wiley Periodicals, Inc.

Computer program for buckling loads of orthotropic laminated stiffened panels subjected to biaxial in-place loads (BUCLASP 2)

NASA Technical Reports Server (NTRS)

Viswanathan, A. V.; Tamekuni, M.

1974-01-01

General-purpose program performs exact instability analyses for structures such as unidirectionally-stiffened, rectangular composite panels. Program was written in FORTRAN IV and COMPASS for CDC-series computers.

NREL Employee Appointed to Presidential Panel

Science.gov Websites

Employee Appointed to Presidential Panel For more information contact: e:mail: Public Affairs Development Panel. The panel will review current and projected U.S. energy research and development programs

Annual Report to the NASA Administrator by the Aerospace Safety Advisory Panel on the Space Shuttle Program. Part 2: Summary of Information Developed in the Panel's Fact-Finding Activities

NASA Technical Reports Server (NTRS)

1977-01-01

The panel focused its attention on those areas that are considered most significant for flight success and safety. Elements required for the Approach and Landing Test Program, the Orbital Flight Test Program, and those management systems and their implementation which directly affect safety, reliability, and quality control, were investigated. Ground facilities and the training programs for the ground and flight crews were studied. Of special interest was the orbiter thermal protection subsystems.

BUCLASP 3: A computer program for stresses and buckling of heated composite stiffened panels and other structures, user's manual

NASA Technical Reports Server (NTRS)

Tripp, L. L.; Tamekuni, M.; Viswanathan, A. V.

1973-01-01

The use of the computer program BUCLASP3 is described. The code is intended for thermal stress and instability analyses of structures such as unidirectionally stiffened panels. There are two types of instability analyses that can be effected by PAINT; (1) thermal buckling, and (2) buckling due to a specified inplane biaxial loading. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plate strip-elements can be analyzed. The two parallel ends of the panel must be simply supported, whereas arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. Any variation in the temperature rise (from ambient) through the cross section of a panel is considered in the analyses but it must be assumed that in the longitudinal direction the temperature field is constant. Load distributions for the externally applied inplane biaxial loads are similar in nature to the permissible temperature field.

PAN AIR modeling studies. [higher order panel method for aircraft design

NASA Technical Reports Server (NTRS)

Towne, M. C.; Strande, S. M.; Erickson, L. L.; Kroo, I. M.; Enomoto, F. Y.; Carmichael, R. L.; Mcpherson, K. F.

1983-01-01

PAN AIR is a computer program that predicts subsonic or supersonic linear potential flow about arbitrary configurations. The code's versatility and generality afford numerous possibilities for modeling flow problems. Although this generality provides great flexibility, it also means that studies are required to establish the dos and don'ts of modeling. The purpose of this paper is to describe and evaluate a variety of methods for modeling flows with PAN AIR. The areas discussed are effects of panel density, internal flow modeling, forebody modeling in subsonic flow, propeller slipstream modeling, effect of wake length, wing-tail-wake interaction, effect of trailing-edge paneling on the Kutta condition, well- and ill-posed boundary-value problems, and induced-drag calculations. These nine topics address problems that are of practical interest to the users of PAN AIR.

Comprehensive review of the evidence regarding the effectiveness of community–based primary health care in improving maternal, neonatal and child health: 8. summary and recommendations of the Expert Panel

PubMed Central

Black, Robert E; Taylor, Carl E; Arole, Shobha; Bang, Abhay; Bhutta, Zulfiqar A; Chowdhury, A Mushtaque R; Kirkwood, Betty R; Kureshy, Nazo; Lanata, Claudio F; Phillips, James F; Taylor, Mary; Victora, Cesar G; Zhu, Zonghan; Perry, Henry B

2017-01-01

Background The contributions that community–based primary health care (CBPHC) and engaging with communities as valued partners can make to the improvement of maternal, neonatal and child health (MNCH) is not widely appreciated. This unfortunate reality is one of the reasons why so few priority countries failed to achieve the health–related Millennium Development Goals by 2015. This article provides a summary of a series of articles about the effectiveness of CBPHC in improving MNCH and offers recommendations from an Expert Panel for strengthening CBPHC that were formulated in 2008 and have been updated on the basis of more recent evidence. Methods An Expert Panel convened to guide the review of the effectiveness of community–based primary health care (CBPHC). The Expert Panel met in 2008 in New York City with senior UNICEF staff. In 2016, following the completion of the review, the Panel considered the review’s findings and made recommendations. The review consisted of an analysis of 661 unique reports, including 583 peer–reviewed journal articles, 12 books/monographs, 4 book chapters, and 72 reports from the gray literature. The analysis consisted of 700 assessments since 39 were analyzed twice (once for an assessment of improvements in neonatal and/or child health and once for an assessment in maternal health). Results The Expert Panel recommends that CBPHC should be a priority for strengthening health systems, accelerating progress in achieving universal health coverage, and ending preventable child and maternal deaths. The Panel also recommends that expenditures for CBPHC be monitored against expenditures for primary health care facilities and hospitals and reflect the importance of CBPHC for averting mortality. Governments, government health programs, and NGOs should develop health systems that respect and value communities as full partners and work collaboratively with them in building and strengthening CBPHC programs – through engagement with planning, implementation (including the full use of community–level workers), and evaluation. CBPHC programs need to reach every community and household in order to achieve universal coverage of key evidence–based interventions that can be implemented in the community outside of health facilities and assure that those most in need are reached. Conclusions Stronger CBPHC programs that foster community engagement/empowerment with the implementation of evidence–based interventions will be essential for achieving universal coverage of health services by 2030 (as called for by the Sustainable Development Goals recently adopted by the United Nations), ending preventable child and maternal deaths by 2030 (as called for by the World Health Organization, UNICEF, and many countries around the world), and eventually achieving Health for All as envisioned at the International Conference on Primary Health Care in 1978. Stronger CBPHC programs can also create entry points and synergies for expanding the coverage of family planning services as well as for accelerating progress in the detection and treatment of HIV/AIDS, tuberculosis, malaria, hypertension, and other chronic diseases. Continued strengthening of CBPHC programs based on rigorous ongoing operations research and evaluation will be required, and this evidence will be needed to guide national and international policies and programs. PMID:28685046

Moderator’s comments

Treesearch

Neil R. Honeycutt

1995-01-01

The urban and wildland interface (mix) problem exists in many communities in the United States. To effectively deal with these complex issues, cooperative approaches should be used to solve regional problems. This panel discussed the unique programs currently at work in Alameda and Contra Costa Counties in northern California. These programs were designed after the...

Enhanced Damage-Resistant Optics for Spaceflight Laser Systems: Workshop findings and recommendations

NASA Technical Reports Server (NTRS)

Schulze, Norman; Cimolino, Marc; Guenther, Arthur; Mcminn, Ted; Rainer, Frank; Schmid, Ansgar; Seitel, Steven C.; Soileau, M. J.; Theon, John S.; Walz, William

1991-01-01

NASA has defined a program to address critical laser-induced damage issues peculiar to its remote sensing systems. The Langley Research Center (LaRC), with input from the Goddard Space Flight Center (GSFC), has developed a program plan focusing on the certification of optical materials for spaceflight applications and the development of techniques to determine the reliability of such materials under extended laser exposures. This plan involves cooperative efforts between NASA and optics manufacturers to quantify the performance of optical materials for NASA systems and to ensure NASA's continued application of the highest quality optics possible for enhanced system reliability. A review panel was organized to assess NASA's optical damage concerns and to evaluate the effectiveness of the LaRC proposed program plan. This panel consisted of experts in the areas of laser-induced damage, optical coating manufacture, and the design and development of laser systems for space. The panel was presented information on NASA's current and planned laser remote sensing programs, laser-induced damage problems already encountered in NASA systems, and the proposed program plan to address these issues. Additionally, technical presentations were made on the state of the art in damage mechanisms, optical materials testing, and issues of coating manufacture germane to laser damage.

Plans for Action.

ERIC Educational Resources Information Center

National Restaurant Association/American Vocational Association Advisory Council.

This document contains transcripts of nine speeches presented at a panel discussion. During the panel presentations, speakers, who are restauranteurs, food service vocational teachers, food service program coordinators, and industry association representatives, described the programs with which they are involved. The programs range from having…

User's guide to PANCOR: A panel method program for interference assessment in slotted-wall wind tunnels

NASA Technical Reports Server (NTRS)

Kemp, William B., Jr.

1990-01-01

Guidelines are presented for use of the computer program PANCOR to assess the interference due to tunnel walls and model support in a slotted wind tunnel test section at subsonic speeds. Input data requirements are described in detail and program output and general program usage are described. The program is written for effective automatic vectorization on a CDC CYBER 200 class vector processing system.

A user guide for the sign sizing program

Treesearch

Donna Sheehy; Kurt Krueger

1999-01-01

This user guide explains how to use the Forest Service Sign Sizing program. The program calculates the length and height of a rectangular sign panel for road and trail guide signs. Variable text messages and directional arrows can be mocked up using U.S. Federal Highway Administration standards. Users can make text or other changes and quickly determine the effect on...

QT Interval Screening in Methadone Maintenance Treatment: Report of a SAMHSA Expert Panel

PubMed Central

Martin, Judith A.; Campbell, Anthony; Killip, Thomas; Kotz, Margaret; Krantz, Mori J.; Kreek, Mary Jeanne; McCarroll, Brian A.; Mehta, Davendra; Payte, J. Thomas; Stimmel, Barry; Taylor, Trusandra; Wilford, Bonnie B.

2014-01-01

In an effort to enhance patient safety in Opioid Treatment Programs (OTPs), the Substance Abuse and Mental Health Services Administration (SAMHSA) convened a multi-disciplinary Expert Panel on the Cardiac Effects of Methadone. Panel members reviewed the literature, regulatory actions, professional guidances, and OTPs’ experiences regarding adverse cardiac events associated with methadone. The Panel concluded that, to the extent possible, every OTP should have a universal Cardiac Risk Management Plan (incorporating clinical assessment, ECG assessment, risk stratification, and prevention of drug interactions) for all patients, and should strongly consider patient-specific risk minimization strategies (such as careful patient monitoring, obtaining ECGs as indicated by a particular patient’s risk profile, and adjusting the methadone dose as needed) for patients with identified risk factors for adverse cardiac events. The Panel also suggested specific modifications to informed consent documents, patient education, staff education, and methadone protocols. PMID:22026519

2015 Dust Risk Standing Review Panel

NASA Technical Reports Server (NTRS)

Steinberg, Susan

2015-01-01

The 2015 Dust Risk Standing Review Panel (SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), NASA Headquarters, and the NASA Research Education and Support Services on November 12, 2015. The SRP reviewed the updated Evidence Report for The Risk of Adverse Health and Performance Effects of Celestial Dust Exposure, as well as the Research Plan for this Risk.

Structural efficiency study of composite wing rib structures

NASA Technical Reports Server (NTRS)

Swanson, Gary D.; Gurdal, Zafer; Starnes, James H., Jr.

1988-01-01

A series of short stiffened panel designs which may be applied to a preliminary design assessment of an aircraft wing rib is presented. The computer program PASCO is used as the primary design and analysis tool to assess the structural efficiency and geometry of a tailored corrugated panel, a corrugated panel with a continuous laminate, a hat stiffened panel, a blade stiffened panel, and an unstiffened flat plate. To correct some of the shortcomings in the PASCO analysis when shear is present, a two step iterative process using the computer program VICON is used. The loadings considered include combinations of axial compression, shear, and lateral pressure. The loading ranges considered are broad enough such that the designs presented may be applied to other stiffened panel applications. An assessment is made of laminate variations, increased spacing, and nonoptimum geometric variations, including a beaded panel, on the design of the panels.

[Effects of SaludArte program in feeding and nutrition components in school children in Mexico City].

PubMed

Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Acosta, Luz María; Morales-Ruan, Ma Del Carmen; Méndez-Gómez Humarán, Ignacio; Robles-Villaseñor, Mara Nadiezhda; Hernández-Ávila, Mauricio

2017-01-01

To assess the effect of Education in Nutrition and Food Assistance components of the SaludArte program in participant schools during 2013-2015. A three cohort comparative study was used, with two type of follow-up panel structures: a complete panel and a continuous time, with a total of consisting on 1620 scholar children from 144 schools. Information on food intake, feeding behaviors, food preservation and hygiene, physical activity (PI) and anthropometry was registered. To stablish effect estimates, a difference in difference method combined with propensity score matching was carried out; as an alternative procedure, logistic-multinomial and logistic regression models were also used. Program attributable estimated effects were as follows: an increase in personal hygiene (p=0.045), increase in nutrition knowledges (p=0.003), PI (p=0.002 2013-2014; p=0.032 2015) and increase in fiber Intake (p=0.064). Sugar intake, contrary to the expected showed a significant increase (p=0.012 continuous time and; p=0.037 complete time). SaludArte shows positive effects over some components as expected. However in order to institutionalize the SaludArte program, it is necessary to consider these learned lessons, give it permanence and impulse it in the schools.

Parallel barrier effectiveness : Dulles noise barrier project

DOT National Transportation Integrated Search

1990-05-01

In an effort to minimize the cost and maximize the effectiveness of highway noise barriers, the Federal Highway Administration and a National Pooled Fund Panel (made up of 14 States) funded a field study program on an experimental highway noise barri...

Can After-School Programs and Private Tutoring Help Improve Students' Achievement? Revisiting the Effects in Korean Secondary Schools

ERIC Educational Resources Information Center

Ha, Yeojin; Park, Hyun-Jeong

2017-01-01

The purpose of this study is to examine the causal effects of after-school programs (ASPs) and private tutoring on Korean secondary school students' academic achievement. The students' data from the Gyeonggi Education Panel Study were used in this study for the actual data analysis. The study attempted to adjust for possible selection bias toward…

77 FR 17073 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

...] Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on Outreach and... Medicare, Medicaid, and the Children's Health Insurance Program (CHIP). This meeting is open to the public... eligible for, Medicare, Medicaid, and the Children's Health Insurance Program (CHIP). Enhancing the Federal...

78 FR 32661 - Medicare, Medicaid, and Children's Health Insurance Programs; Renewal of the Advisory Panel on...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

...] Medicare, Medicaid, and Children's Health Insurance Programs; Renewal of the Advisory Panel on Outreach and... Medicaid and the Children's Health Insurance Program (CHIP), and also expanded the availability of other... are eligible for Medicare, Medicaid, and the Children's Health Insurance Program (CHIP) about options...

77 FR 37681 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

...] Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on Outreach and... Medicare, Medicaid, and the Children's Health Insurance Program (CHIP). This meeting is open to the public... eligible for, Medicare, Medicaid and the Children's Health Insurance Program (CHIP). Enhancing the Federal...

76 FR 37120 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

...] Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on Outreach and... the Medicare, Medicaid, and Children's Health Insurance (CHIP) programs. This meeting is open to the... outreach programs for individuals enrolled in, or eligible for, Medicare, Medicaid, and the Children's...

Prices of unhealthy foods, Food Stamp Program participation, and body weight status among U.S. low-income women†

PubMed Central

Zhang, Qi; Chen, Zhuo; Diawara, Norou; Wang, Youfa

2014-01-01

This paper examines the interactive effect between the price of unhealthy foods and Food Stamp Program participation on body weight status among low-income women in the United States. We merged the panel data of the National Longitudinal Survey of Youth 1979 cohort in 1985–2002 and the Cost of Living Index data compiled by the American Chamber of Commerce Researchers Association by using geographic identifiers. Using the merged data, we used panel econometric models to examine the impact of unhealthy food prices on the food stamp-eligible U.S. population. Our results indicate that higher prices for unhealthy food can partially offset the positive association between Food Stamp Program participation and bodyweight among low-income women. PMID:25177147

Application study of filamentary composites in a commercial jet aircraft fuselage

NASA Technical Reports Server (NTRS)

Johnson, R. W.; June, R. R.

1972-01-01

A study of applications of filamentary composite materials to aircraft fuselage structure was performed. General design criteria were established and material studies conducted using the 727-200 forebody as the primary structural component. Three design approaches to the use of composites were investigated: uniaxial reinforcement of metal structure, uniaxial and biaxial reinforcement of metal structure, and an all-composite design. Materials application studies for all three concepts were conducted on fuselage shell panels, keel beam, floor beams, floor panels, body frames, fail-safe straps, and window frames. Cost benefit studies were conducted and developmental program costs estimated. On the basis of weight savings, cost effectiveness, developmental program costs, and potential for early application on commercial aircraft, the unaxial design is recommended for a 5-year flight service evaluation program.

The Future of Public Broadcasting.

ERIC Educational Resources Information Center

Bachrach, Judy

This script of "National Town Meeting," a public affairs program on National Public Radio, contains a panel discussion on the future of public broadcasting, during which panel members also answer questions from the audience. The topics discussed include programming and program content, production costs, public participation, funding, the…

Investigation to advance prediction techniques of the low-speed aerodynamics of V/STOL aircraft

NASA Technical Reports Server (NTRS)

Maskew, B.; Strash, D.; Nathman, J.; Dvorak, F. A.

1985-01-01

A computer program, VSAERO, has been applied to a number of V/STOL configurations with a view to advancing prediction techniques for the low-speed aerodynamic characteristics. The program couples a low-order panel method with surface streamline calculation and integral boundary layer procedures. The panel method--which uses piecewise constant source and doublet panels-includes an iterative procedure for wake shape and models boundary layer displacement effect using the source transpiration technique. Certain improvements to a basic vortex tube jet model were installed in the code prior to evaluation. Very promising results were obtained for surface pressures near a jet issuing at 90 deg from a flat plate. A solid core model was used in the initial part of the jet with a simple entrainment model. Preliminary representation of the downstream separation zone significantly improve the correlation. The program accurately predicted the pressure distribution inside the inlet on the Grumman 698-411 design at a range of flight conditions. Furthermore, coupled viscous/potential flow calculations gave very close correlation with experimentally determined operational boundaries dictated by the onset of separation inside the inlet. Experimentally observed degradation of these operational boundaries between nacelle-alone tests and tests on the full configuration were also indicated by the calculation. Application of the program to the General Dynamics STOL fighter design were equally encouraging. Very close agreement was observed between experiment and calculation for the effects of power on pressure distribution, lift and lift curve slope.

78 FR 17219 - National Institute of Environmental Health Sciences; Notice of Closed Meeting Pursuant to section...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

... Health Sciences Special Emphasis Panel, Assessment of Adverse Genetic Effects From Exposure to Compounds... Program Nos. 93.115, Biometry and Risk Estimation--Health Risks from Environmental Exposures; 93.142... Research and Testing, National Institutes of Health, HHS) Dated: March 14, 2013. Carolyn Baum, Program...

Liberal Arts Catch-Up Revisited

ERIC Educational Resources Information Center

Goyder, John

2014-01-01

This paper replicates the work of Giles and Drewes from the 1990s. They showed a catch-up effect whereby graduates of liberal arts undergraduate programs, although at an early-career disadvantage compared with graduates of applied programs, had higher incomes by mid-career. Working with the Panel 5 Survey of Labour and Income Dynamics (2005-2010),…

Program Integration: An Alternative for Improving County Rural Human Services Delivery. Technical Paper No. 13.

ERIC Educational Resources Information Center

Center for Rural Pennsylvania, Harrisburg.

This report examines program integration as a way to improve the delivery of rural human services in Pennsylvania. A panel of policymakers, human services providers, and representatives of state agencies identified barriers to effective rural human services delivery and generated policy recommendations. Most county-based human services in…

Training That Works: Lessons from California's Employment Training Panel Program.

ERIC Educational Resources Information Center

Moore, Richard W.; Blake, Daniel R.; Phillips, G. Michael; McConaughy, Daniel

California's Employment Training Panel Program (ETP), the largest state-funded customized training program for incumbent workers in the nation, has had a positive impact on the economy of California, and its success has policy implications for other state programs. The impact of ETP on trainees includes the following: they are more attached to the…

What Happens When Persons Leave Welfare: Data from the SIPP Panel File.

ERIC Educational Resources Information Center

Lamas, Enrique; McNeil, John

This document reports on a study of the likelihood of individuals participating in the Federal food stamp program and the Medicaid program and the likelihood of exiting those programs. Data were analyzed from the first panel file of the Survey of Income and Program Participation (SIPP). Special problems with representativeness and measurement…

45 CFR 1801.23 - Recommendation by panel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recommendation by panel. 1801.23 Section 1801.23... HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.23 Recommendation by panel. (a) Each Panel is... recommend additional Scholars from the States in its region. (b) A panel's recommendations are based on the...

45 CFR 1801.23 - Recommendation by panel.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Recommendation by panel. 1801.23 Section 1801.23... HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.23 Recommendation by panel. (a) Each Panel is... recommend additional Scholars from the States in its region. (b) A panel's recommendations are based on the...

A Combined Hazard Index Fire Test Methodology for Aircraft Cabin Materials. Volume I.

DTIC Science & Technology

1982-04-01

PROGRAM TEST PANEL NO. 1 ....... 52 5 SUMARY OF EXPERIMTAL CHAS/SATS DATA FOR CI PRGRAM TEST PANEL 2, 3 & 4...As indicated in Figure 2, the dose of each hazard building up in CHI zone 13 is approaching an "effective dose" limit which prevents occupant escape...per minute. During a test, flow into SATS was stopped when CO reached peak concentrations to prevent dilution thereafter at decreasing sample CO

Microbiological sampling of spacecraft cabling, antennas, solar panels and thermal blankets

NASA Technical Reports Server (NTRS)

Koukol, R. C.

1973-01-01

Sampling procedures and techniques described resulted from various flight project microbiological monitoring programs of unmanned planetary spacecraft. Concurrent with development of these procedures, compatibility evaluations were effected with the cognizant spacecraft subsystem engineers to assure that degradation factors would not be induced during the monitoring program. Of significance were those areas of the spacecraft configuration for which special handling precautions and/or nonstandard sample gathering techniques were evolved. These spacecraft component areas were: cabling, high gain antenna, solar panels, and thermal blankets. The compilation of these techniques provides a historical reference for both the qualification and quantification of sampling parameters as applied to the Mariner Spacecraft of the late 1960's and early 1970's.

Composite materials research and education program: The NASA-Virginia Tech composites program

NASA Technical Reports Server (NTRS)

Herakovich, C. T.

1980-01-01

Major areas of study include: (1) edge effects in finite width laminated composites subjected to mechanical, thermal and hygroscopic loading with temperature dependent material properties and the influence of edge effects on the initiation of failure; (2) shear and compression testing of composite materials at room and elevated temperatures; (3) optical techniques for precise measurement of coefficients of thermal expansion of composites; (4) models for the nonlinear behavior of composites including material nonlinearity and damage accumulation and verification of the models under biaxial loading; (5) compressive failure of graphite/epoxy plates with circular holes and the buckling of composite cylinders under combined compression and torsion; (6) nonlinear mechanical properties of borsic/aluminum, graphite/polyimide and boron/aluminum; (7) the strength characteristics of spliced sandwich panels; and (8) curved graphite/epoxy panels subjected to internal pressure.

Heat pipe radiators for space

NASA Technical Reports Server (NTRS)

Sellers, J. P.

1976-01-01

Analysis of the data heat pipe radiator systems tested in both vacuum and ambient environments was continued. The systems included (1) a feasibility VCHP header heat-pipe panel, (2) the same panel reworked to eliminate the VCHP feature and referred to as the feasibility fluid header panel, and (3) an optimized flight-weight fluid header panel termed the 'prototype.' A description of freeze-thaw thermal vacuum tests conducted on the feasibility VCHP was included. In addition, the results of ambient tests made on the feasibility fluid header are presented, including a comparison with analytical results. A thermal model of a fluid header heat pipe radiator was constructed and a computer program written. The program was used to make a comparison of the VCHP and fluid-header concepts for both single and multiple panel applications. The computer program was also employed for a parametric study, including optimum feeder heat pipe spacing, of the prototype fluid header.

Advanced composites structural concepts and materials technologies for primary aircraft structures. Structural response and failure analysis: ISPAN modules users manual

NASA Technical Reports Server (NTRS)

Hairr, John W.; Huang, Jui-Ten; Ingram, J. Edward; Shah, Bharat M.

1992-01-01

The ISPAN Program (Interactive Stiffened Panel Analysis) is an interactive design tool that is intended to provide a means of performing simple and self contained preliminary analysis of aircraft primary structures made of composite materials. The program combines a series of modules with the finite element code DIAL as its backbone. Four ISPAN Modules were developed and are documented. These include: (1) flat stiffened panel; (2) curved stiffened panel; (3) flat tubular panel; and (4) curved geodesic panel. Users are instructed to input geometric and material properties, load information and types of analysis (linear, bifurcation buckling, or post-buckling) interactively. The program utilizing this information will generate finite element mesh and perform analysis. The output in the form of summary tables of stress or margins of safety, contour plots of loads or stress, and deflected shape plots may be generalized and used to evaluate specific design.

Substantiation Data for Advanced Beaded and Tubular Structural Panels. Volume 3: Testing

NASA Technical Reports Server (NTRS)

Hedges, P. C.; Greene, B. E.

1974-01-01

The test program is described, which was conducted to provide the necessary experimental data to verify the design and analysis methods developed for beaded and tubular panels. Test results are summarized and presented for all local buckling and full size panel tests. Selected representative test data from each of these tests is presented in detail. The results of this program established a valid analysis and design procedure for circular tube panels. Test results from three other configurations show deformational modes which are not adequately accounted for in the present analyses.

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part three: aerobic exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Mizusaki Imoto, Aline; Toupin-April, Karine; Westby, Marie; Álvarez Gallardo, Inmaculada C; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective aerobic exercise programs and provide clinicians and patients with updated, high-quality recommendations concerning traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with strengthening exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+, or D-) was used, based on statistical significance ( P < 0.5) and clinical importance (⩾15% improvement). The five high-quality studies included demonstrated that various aerobic training exercises are generally effective for improving knee osteoarthritis within a 12-week period. An aerobic exercise program demonstrated significant improvement for pain relief (Grade B), physical function (Grade B) and quality of life (Grade C+). Aerobic exercise in combination with strengthening exercises showed significant improvement for pain relief (3 Grade A) and physical function (2 Grade A, 2 Grade B). A short-term aerobic exercise program with/without muscle strengthening exercises is promising for reducing pain, improving physical function and quality of life for individuals with knee osteoarthritis.

Residual-strength tests of L-1011 vertical fin components after 10 and 20 years of simulated flight service

NASA Technical Reports Server (NTRS)

Lopez, O. F.

1984-01-01

Part of the NASA/ACEE Program was to determine the effect of long-term durability testing on the residual strength of graphite-epoxy cover panel and spar components of the Lockheed L-1011 aircraft vertical stabilizer. The results of these residual strength tests are presented herein. The structural behavior and failure mode of both cover panel and spar components were addressed, and the test results obtained were compared with the static test results generated by Lockheed. The effect of damage on one of the spar specimens was described.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1989-01-01

This report provides findings, conclusions and recommendations regarding the National Space Transportation System (NSTS), the Space Station Freedom Program (SSFP), aeronautical projects and other areas of NASA activities. The main focus of the Aerospace Safety Advisory Panel (ASAP) during 1988 has been monitoring and advising NASA and its contractors on the Space Transportation System (STS) recovery program. NASA efforts have restored the flight program with a much better management organization, safety and quality assurance organizations, and management communication system. The NASA National Space Transportation System (NSTS) organization in conjunction with its prime contractors should be encouraged to continue development and incorporation of appropriate design and operational improvements which will further reduce risk. The data from each Shuttle flight should be used to determine if affordable design and/or operational improvements could further increase safety. The review of Critical Items (CILs), Failure Mode Effects and Analyses (FMEAs) and Hazard Analyses (HAs) after the Challenger accident has given the program a massive data base with which to establish a formal program with prioritized changes.

Open Workshop on Solar Technologies: Proceedings

NASA Astrophysics Data System (ADS)

1980-07-01

The deliberations, conclusions, and recommendations of six panels asked to provide advice to the Department of Energy on the subject of solar energy are detailed. Introductory speeches by seven experts, excerpts from the succeeding two half days of discussion, the final reports for the panel chairpersons, and subsequent discussion and questioning are included. Approximately 125 findings and recommendations were developed by the six panels covering a wide variety of topics. Major recurring themes were recommendations for increased funding, federal program improvement, conservation, outreach programs small business funding, and solar training programs.

A vectorization of the Hess McDonnell Douglas potential flow program NUED for the STAR-100 computer

NASA Technical Reports Server (NTRS)

Boney, L. R.; Smith, R. E., Jr.

1979-01-01

The computer program NUED for analyzing potential flow about arbitrary three dimensional lifting bodies using the panel method was modified to use vector operations and run on the STAR-100 computer. A high speed of computation and ability to approximate the body surface with a large number of panels are characteristics of NUEDV. The new program shows that vector operations can be readily implemented in programs of this type to increase the computational speed on the STAR-100 computer. The virtual memory architecture of the STAR-100 facilitates the use of large numbers of panels to approximate the body surface.

14 CFR 1259.600 - Panel description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Panel description. 1259.600 Section 1259.600 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.600 Panel description. An independent committee...

Participation in the National School Lunch Program: Importance of School-Level and Neighborhood Contextual Factors

ERIC Educational Resources Information Center

Mirtcheva, Donka M.; Powell, Lisa M.

2009-01-01

Background: This study examined the effect of stigma (proxied by school-level peer participation), neighborhood food environment, and demographic characteristics on participation in the U.S. Department of Agriculture National School Lunch Program (NSLP). Methods: The 1997 and 2003 waves of the Child Development Supplement to the Panel Study of…

An Examination of the Relationship between Outcomes Assessment and Accreditation in Community College-Based Health Information Technology Programs

ERIC Educational Resources Information Center

Kyriakos, Margaret Helen Gallo

2009-01-01

This study compares the Commission on Accreditation for Health Informatics and Information Management Education (CAHIIM) Board of Commissioner and Panel of Accreditation Reviewer understanding of what constitutes student learning outcomes and an effective program evaluation plan with that of campus-based health information technology (HIT) program…

14 CFR 1259.600 - Panel description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Panel description. 1259.600 Section 1259.600 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.600 Panel description. An independent committee, the Space...

COMMAND: A FORTRAN program for simplified composite analysis and design. [computerized design of multilayered composite panels

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1976-01-01

A FORTRAN program is presented for preliminary analysis and design of multilayered composite panels subjected to inplane loads. All plys are of the same material. The composite is assumed symmetric about the midplane, but need not be balanced. Failure criterion includes limit ply strains and lower bounds on composite inplane stiffnesses. Multiple load conditions are considered. The required input data is defined and examples are provided to aid the use in making the program operational. Average panel design times are two seconds on an IBM 360/67 computer. Results are compared with published literature. A complete FORTRAN listing of program COMAND is provided. In addition, the optimization program CONMIN is required for design.

Improvements to the missile aerodynamic prediction code DEMON3

NASA Technical Reports Server (NTRS)

Dillenius, Marnix F. E.; Johnson, David L.; Lesieutre, Daniel J.

1992-01-01

The computer program DEMON3 was developed for the aerodynamic analysis of nonconventional supersonic configurations comprising a body with noncircular cross section and up to two wing or fin sections. Within a wing or fin section, the lifting surfaces may be cruciform, triform, planar, or low profile layouts; the planforms of the lifting surfaces allow for breaks in sweep. The body and fin sections are modeled by triplet and constant u-velocity panels, respectively, accounting for mutual body-fin interference. Fin thickness effects are included for the use of supersonic planar source panels. One of the unique features of DEMON3 is the modeling of high angle of attack vortical effects associated with the lifting surfaces and the body. In addition, shock expansion and Newtonian pressure calculation methods can be optionally engaged. These two dimensional nonlinear methods are augmented by aerodynamic interference determined from the linear panel methods. Depending on the geometric details of the body, the DEMON3 program can be used to analyze nonconventional configurations at angles of attack up to 25 degrees for Mach numbers from 1.1 to 6. Calculative results and comparisons with experimental data demonstrate the capabilities of DEMON3. Limitations and deficiencies are listed.

Education policy implications from the Expert Panel on Electronic Media and Youth Violence.

PubMed

Worthen, Maria R

2007-12-01

The research from the Expert Panel on Electronic Media and Youth Violence makes a compelling case for why educators and education policymakers should care about the effects of media on youth behavior, and the growing phenomenon of Internet bullying and harassment. The ability of the U.S. education system to respond is limited not only by competing instructional priorities but also by the governance structure of the education system itself. The federal role is limited to a proportionally small amount of funding for states and schools, to raising public awareness, and to providing research and data. States can set priorities, make requirements, and direct funding. Districts and schools ultimately have the most control over prevention program selection and setting social and behavioral norms. Key implications of the panel's research for educators and education policymakers include: Internet bullying is correlated with school behavior problems; Internet bullying behavior may peak in middle school; Internet bullying shares common predictors with verbal and, to some extent, physical bullying; Media literacy programs may mitigate the negative effects of electronic media on youth. Specific recommendations based on these conclusions are discussed, and research priorities for the prevention and education fields are identified.

Substructure analysis using NICE/SPAR and applications of force to linear and nonlinear structures. [spacecraft masts

NASA Technical Reports Server (NTRS)

Razzaq, Zia; Prasad, Venkatesh; Darbhamulla, Siva Prasad; Bhati, Ravinder; Lin, Cai

1987-01-01

Parallel computing studies are presented for a variety of structural analysis problems. Included are the substructure planar analysis of rectangular panels with and without a hole, the static analysis of space mast, using NICE/SPAR and FORCE, and substructure analysis of plane rigid-jointed frames using FORCE. The computations are carried out on the Flex/32 MultiComputer using one to eighteen processors. The NICE/SPAR runstream samples are documented for the panel problem. For the substructure analysis of plane frames, a computer program is developed to demonstrate the effectiveness of a substructuring technique when FORCE is enforced. Ongoing research activities for an elasto-plastic stability analysis problem using FORCE, and stability analysis of the focus problem using NICE/SPAR are briefly summarized. Speedup curves for the panel, the mast, and the frame problems provide a basic understanding of the effectiveness of parallel computing procedures utilized or developed, within the domain of the parameters considered. Although the speedup curves obtained exhibit various levels of computational efficiency, they clearly demonstrate the excellent promise which parallel computing holds for the structural analysis problem. Source code is given for the elasto-plastic stability problem and the FORCE program.

Pragmatic Divestment of KC-135 Navigators in the Special Operations Air Refueling Mission

DTIC Science & Technology

2015-03-26

publicly expressed opinions, and the bandwagon effect of majority opinion. This technique replaces direct debate by a carefully designed program of... effective , comprehensive solution. Ultimately, the panel of experts arrived at conclusions supporting the hypothesis that navigator divestment and SOAR...manpower, personnel, and training effects after navigators are phased out

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

2002-01-01

This Annual Report of the Aerospace Safety Advisory Panel (ASAP) presents results of activities during calendar year 2001. The year was marked by significant achievements in the Space Shuttle and International Space Station (ISS) programs and encouraging accomplishments by the Aerospace Technology Enterprise. Unfortunately, there were also disquieting mishaps with the X-43, a LearJet, and a wind tunnel. Each mishap was analyzed in an orderly process to ascertain causes and derive lessons learned. Both these accomplishments and the responses to the mishaps led the Panel to conclude that safety and risk management is currently being well served within NASA. NASA's operations evidence high levels of safety consciousness and sincere efforts to place safety foremost. Nevertheless, the Panel's safety concerns have never been greater. This dichotomy has arisen because the focus of most NASA programs has been directed toward program survival rather than effective life cycle planning. Last year's Annual Report focused on the need for NASA to adopt a realistically long planning horizon for the aging Space Shuttle so that safety would not erode. NASA's response to the report concurred with this finding. Nevertheless, there has been a greater emphasis on current operations to the apparent detriment of long-term planning. Budget cutbacks and shifts in priorities have severely limited the resources available to the Space Shuttle and ISS for application to risk-reduction and life-extension efforts. As a result, funds originally intended for long-term safety-related activities have been used for operations. Thus, while safety continues to be well served at present, the basis for future safety has eroded. Section II of this report develops this theme in more detail and presents several important, overarching findings and recommendations that apply to many if not all of NASA's programs. Section III of the report presents other significant findings, recommendations and supporting material applicable to specific program areas. Appendix A presents a list of Panel members. Appendix B contains the reaction of the ASAP to NASA's response to the calendar year 2000 findings and recommendations. In accordance with a practice started last year, this Appendix includes brief narratives as well as classifications of the responses as 'open,' 'closed,' or 'continuing.' Appendix C details the Panel's activities during the reporting period.

Space Station Engineering and Technology Development. Proceedings of the Panel on Solar Thermodynamics Research and Technology Development, July 31, 1985

NASA Technical Reports Server (NTRS)

1985-01-01

Solar thermodynamics research and technology is reported. Comments on current program activity and future plans with regard to satisfying potential space station electric power generation requirements are provided. The proceedings contain a brief synopsis of the presentations to the panel, including panel comments, and a summary of the panel's observations. Selected presentation material is appended. Onboard maintainability and repair in space research and technology plan, solar thermodynamic research, program performance, onboard U.S. ground based mission control, and technology development rad maps from 10 C to the growth station are addressed.

7 CFR 205.509 - Peer review panel.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Accreditation of Certifying Agents § 205.509 Peer review panel. The... evaluate the National Organic Program's adherence to the accreditation procedures in this subpart F and ISO...

NOAA Office of Exploration and Research > Science > Overview

Science.gov Websites

2014 Funding Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Presentations Supporting

76 FR 12980 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... Emphasis Panel; Program Project: Cell Biology. Date: March 29-30, 2011. Time: 8 a.m. to 5 p.m. Agenda: To... Review Special Emphasis Panel; Program Project: NeuroAIDS Applications. Date: March 30-31, 2011. Time: 8...

A Qualitative Evaluation of Ethics Educational Program in Health Science.

PubMed

Ekmekci, Perihan Elif; Oral, Murat; Yurdakul, Eray Serdar

2015-06-01

This paper originates from a panel discussion on the evaluation of "Ethics Educational Program in Health Sciences" held during the IAEE Conference 2014 Ankara, Turkey. The participants of the panel had consultations to solidify the concepts about the topic. The qualitative data out of these antecedent discussions became mature with the contributions in the panel. The outcome of this qualitative study mainly focuses on the examples of two current curricula; one from PhD on History of Medicine and Medical Ethics, the other one from an elective course on medical ethics as a part of a PhD program on Pharmacy Management and History, followed by the major challenges the trainees face during their education, their expectations and whether the program was satisfactory, the aspects of the programs which are prone to improvement and their overall evaluations of the programs.

PMARC - PANEL METHOD AMES RESEARCH CENTER

NASA Technical Reports Server (NTRS)

Ashby, D. L.

1994-01-01

Panel methods are moderate cost tools for solving a wide range of engineering problems. PMARC (Panel Method Ames Research Center) is a potential flow panel code that numerically predicts flow fields around complex three-dimensional geometries. PMARC's predecessor was a panel code named VSAERO which was developed for NASA by Analytical Methods, Inc. PMARC is a new program with many additional subroutines and a well-documented code suitable for powered-lift aerodynamic predictions. The program's open architecture facilitates modifications or additions of new features. Another improvement is the adjustable size code which allows for an optimum match between the computer hardware available to the user and the size of the problem being solved. PMARC can be resized (the maximum number of panels can be changed) in a matter of minutes. Several other state-of-the-art PMARC features include internal flow modeling for ducts and wind tunnel test sections, simple jet plume modeling essential for the analysis and design of powered-lift aircraft, and a time-stepping wake model which allows the study of both steady and unsteady motions. PMARC is a low-order panel method, which means the singularities are distributed with constant strength over each panel. In many cases low-order methods can provide nearly the same accuracy as higher order methods (where the singularities are allowed to vary linearly or quadratically over each panel). Low-order methods have the advantage of a shorter computation time and do not require exact matching between panels. The flow problem is solved by assuming that the body is at rest in a moving flow field. The body is modeled as a closed surface which divides space into two regions -- one region contains the flow field of interest and the other contains a fictitious flow. External flow problems, such as a wing in a uniform stream, have the external region as the flow field of interest and the internal flow as the fictitious flow. This arrangement is reversed for internal flow problems where the internal region contains the flow field of interest and the external flow field is fictitious. In either case it is assumed that the velocity potentials in both regions satisfy Laplace's equation. PMARC has extensive geometry modeling capabilities for handling complex, three-dimensional surfaces. As with all panel methods, the geometry must be modeled by a set of panels. For convenience, the geometry is usually subdivided into several pieces and modeled with sets of panels called patches. A patch may be folded over on itself so that opposing sides of the patch form a common line. For example, wings are normally modeled with a folded patch to form the trailing edge of the wing. PMARC also has the capability to automatically generate a closing tip patch. In the case of a wing, a tip patch could be generated to close off the wing's third side. PMARC has a simple jet model for simulating a jet plume in a crossflow. The jet plume shape, trajectory, and entrainment velocities are computed using the Adler/Baron jet in crossflow code. This information is then passed back to PMARC. The wake model in PMARC is a time-stepping wake model. The wake is convected downstream from the wake separation line by the local velocity flowfield. With each time step, a new row of wake panels is added to the wake at the wake separation line. PMARC also allows an initial wake to be specified if desired, or, as a third option, no wakes need be modeled. The effective presentation of results for aerodynamics problems requires the generation of report-quality graphics. PMAPP (ARC-12751), the Panel Method Aerodynamic Plotting Program, (Sterling Software), was written for scientists at NASA's Ames Research Center to plot the aerodynamic analysis results (flow data) from PMARC. PMAPP is an interactive, color-capable graphics program for the DEC VAX or MicroVAX running VMS. It was designed to work with a variety of terminal types and hardcopy devices. PMAPP is available separately from COSMIC. PMARC was written in standard FORTRAN77 using adjustable size arrays throughout the code. Redimensioning PMARC will change the amount of disk space and memory the code requires to be able to run; however, due to its memory requirements, this program does not readily lend itself to implementation on MS-DOS based machines. The program was implemented on an Apple Macintosh (using 2.5 MB of memory) and tested on a VAX/VMS computer. The program is available on a 3.5 inch Macintosh format diskette (standard media) or in VAX BACKUP format on TK50 tape cartridge or 9-track magnetic tape. PMARC was developed in 1989.

Computer prediction of large reflector antenna radiation properties

NASA Technical Reports Server (NTRS)

Botula, A.

1980-01-01

A FORTRAN program for calculating reflector antenna radiation patterns was rewritten and extended to include reflectors composed of a number of panels. These individual panels must be analytic surfaces. The theoretical foundation for the program is as follows: Geometrical optics techniques are used to trace rays from a feed antenna to the reflector surface and back to a mathematical plane just in front of the reflector. The resulting tangential electric field distribution, assumed to be the only source of forward radiation, is integrated numerically to calculate the radiation pattern for a desired set of angles. When the reflector is composed of more than one panel, each panel is treated as a separated antenna, the ray-tracing procedure and integration being repeated for each panel. The results of the individual aperture plane integrations are stored and summed to yield the relative electric field strength over the angles of interest. An example and several test cases are included to demonstrate the use of the program and verify the new method of computation.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1998-01-01

During 1997, the Aerospace Safety Advisory Panel (ASAP) continued its safety reviews of NASA's human space flight and aeronautics programs. Efforts were focused on those areas that the Panel believed held the greatest potential to impact safety. Continuing safe Space Shuttle operations and progress in the manufacture and testing of primary components for the International Space Station (ISS) were noteworthy. The Panel has continued to monitor the safety implications of the transition of Space Shuttle operations to the United Space Alliance (USA). One area being watched closely relates to the staffing levels and skill mix in both NASA and USA. Therefore, a section of this report is devoted to personnel and other related issues that are a result of this change in NASA's way of doing business for the Space Shuttle. Attention will continue to be paid to this important topic in subsequent reports. Even though the Panel's activities for 1997 were extensive, fewer specific recommendations were formulated than has been the case in recent years. This is indicative of the current generally good state of safety of NASA programs. The Panel does, however, have several longer term concerns that have yet to develop to the level of a specific recommendation. These are covered in the introductory material for each topic area in Section 11. In another departure from past submissions, this report does not contain individual findings and recommendations for the aeronautics programs. While the Panel devoted its usual efforts to examining NASA's aeronautic centers and programs, no specific recommendations were identified for inclusion in this report. In lieu of recommendations, a summary of the Panel's observations of NASA's safety efforts in aeronautics and future Panel areas of emphasis is provided. With profound sadness the Panel notes the passing of our Chairman, Paul M. Johnstone, on December 17, 1997, and our Staff Assistant, Ms. Patricia M. Harman, on October 5, 1997. Other changes to the Panel composition during the past year were: the resignation of Mr. Dennis E. Fitch as a Consultant; the appointment of Mr. Roger D. Schaufele as a Consultant; and the assignment of Ms. Susan M. Smith as Staff Assistant.

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

NASA Technical Reports Server (NTRS)

Johnson, R., Jr.; Killpatrick, D. H.

1976-01-01

The results obtained in a program to evaluate dispersion-strengthened nickel-base alloys for use in a metallic radiative thermal protection system operating at surface temperatures to 1477 K for the space shuttle were presented. Vehicle environments having critical effects on the thermal protection system are defined; TD Ni-20Cr characteristics of material used in the current study are compared with previous results; cyclic load, temperature, and pressure effects on sheet material residual strength are investigated; the effects of braze reinforcement in improving the efficiency of spotwelded joints are evaluated; parametric studies of metallic radiative thermal protection systems are reported; and the design, instrumentation, and testing of full scale subsize heat shield panels in two configurations are described. Initial tests of full scale subsize panels included simulated meteoroid impact tests, simulated entry flight aerodynamic heating, programmed differential pressure loads and temperatures simulating mission conditions, and acoustic tests simulating sound levels experienced during boost flight.

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a difference for the safety of the Space Shuttle Vehicle, its crew, and personnel. Because of the MSERP's valuable contribution to the assessment of safety risk for the SSP, this paper also proposes an enhanced Panel concept that takes this successful partnership concept to a higher level of 'true partnership'. The proposed panel is aimed to be responsible for the review and assessment of all risk relative to Safety for new and future aerospace and related programs.

78 FR 27409 - Office of the Director, National Institutes of Health; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Programs Special Emphasis Panel; Comparative Medicine Resources. Date: June 5-6, 2013. Time: 8:00 a.m. to 5... Infrastructure Programs Special Emphasis Panel; Comparative Medicine Training. Date: June 25-26, 2013. Time: 8:00...

75 FR 18241 - Proposal Review Panel for Materials Research Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research Notice of Meeting In... Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

77 FR 20852 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In.... Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

Precast concrete sandwich panels subjected to impact loading

NASA Astrophysics Data System (ADS)

Runge, Matthew W.

Precast concrete sandwich panels are a relatively new product in the construction industry. The design of these panels incorporates properties that allow for great resilience against temperature fluctuation as well as the very rapid and precise construction of facilities. The concrete sandwich panels investigated in this study represent the second generation of an ongoing research and development project. This second generation of panels have been engineered to construct midsized commercial buildings up to three stories in height as well as residential dwellings. The panels consist of a double-tee structural wythe, a foam core and a fascia wythe, joined by shear connectors. Structures constructed from these panels may be subjected to extreme loading including the effects of seismic and blast loading in addition to wind. The aim of this work was to investigate the behaviour of this particular sandwich panel when subjected to structural impact events. The experimental program consisted of fourteen concrete sandwich panels, five of which were considered full-sized specimens (2700 mm X 1200mm X 270 mm) and nine half-sized specimens (2700mm X 600mm X 270 mm) The panels were subjected to impact loads from a pendulum impact hammer where the total energy applied to the panels was varied by changing the mass of the hammer. The applied loads, displacements, accelerations, and strains at the mid-span of the panel as well as the reaction point forces were monitored during the impact. The behaviour of the panels was determined primarily from the experimental results. The applied loads at low energy levels that caused little to no residual deflection as well as the applied loads at high energy levels that represent catastrophic events and thus caused immediate failure were determined from an impact on the structural and the fascia wythes. Applied loads at intermediate energy levels representing extreme events were also used to determine whether or not the panels could withstand multiple impacts. It was shown that panels impacted on the fascia wythe are capable of withstanding multiple impacts of energy levels in excess of 16 000 J while panels that were impacted on the structural wythe are capable of resisting a single impact delivering an energy level of 10 000 J or multiple impacts from an energy level of 5 000 J. A Single Degree of Freedom (SDOF) model was developed to predict the maximum deflection of the panels and it provided a good approximation of the deflection observed during the experimental program. A high degree of composite action between the two wythes was determined to exist from the results of high speed video imaging and through SDOF modelling.

Results and harmonization guidelines from two large-scale international Elispot proficiency panels conducted by the Cancer Vaccine Consortium (CVC/SVI).

PubMed

Janetzki, Sylvia; Panageas, Katherine S; Ben-Porat, Leah; Boyer, Jean; Britten, Cedrik M; Clay, Timothy M; Kalos, Michael; Maecker, Holden T; Romero, Pedro; Yuan, Jianda; Kast, W Martin; Hoos, Axel

2008-03-01

The Cancer Vaccine Consortium of the Sabin Vaccine Institute (CVC/SVI) is conducting an ongoing large-scale immune monitoring harmonization program through its members and affiliated associations. This effort was brought to life as an external validation program by conducting an international Elispot proficiency panel with 36 laboratories in 2005, and was followed by a second panel with 29 participating laboratories in 2006 allowing for application of learnings from the first panel. Critical protocol choices, as well as standardization and validation practices among laboratories were assessed through detailed surveys. Although panel participants had to follow general guidelines in order to allow comparison of results, each laboratory was able to use its own protocols, materials and reagents. The second panel recorded an overall significantly improved performance, as measured by the ability to detect all predefined responses correctly. Protocol choices and laboratory practices, which can have a dramatic effect on the overall assay outcome, were identified and lead to the following recommendations: (A) Establish a laboratory SOP for Elispot testing procedures including (A1) a counting method for apoptotic cells for determining adequate cell dilution for plating, and (A2) overnight rest of cells prior to plating and incubation, (B) Use only pre-tested serum optimized for low background: high signal ratio, (C) Establish a laboratory SOP for plate reading including (C1) human auditing during the reading process and (C2) adequate adjustments for technical artifacts, and (D) Only allow trained personnel, which is certified per laboratory SOPs to conduct assays. Recommendations described under (A) were found to make a statistically significant difference in assay performance, while the remaining recommendations are based on practical experiences confirmed by the panel results, which could not be statistically tested. These results provide initial harmonization guidelines to optimize Elispot assay performance to the immunotherapy community. Further optimization is in process with ongoing panels.

SCBUCKLE user's manual: Buckling analysis program for simple supported and clamped panels

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1993-01-01

The program SCBUCKLE calculates the buckling loads and mode shapes of cylindrically curved, rectangular panels. The panel is assumed to have no imperfections. SCBUCKLE is capable of analyzing specially orthotropic symmetric panels (i.e., A(sub 16) = A(sub 26) = 0.0, D(sub 16) = D(sub 26) = 0.0, B(sub ij) = 0.0). The analysis includes first-order transverse shear theory and is capable of modeling sandwich panels. The analysis supports two types of boundary conditions: either simply supported or clamped on all four edges. The panel can be subjected to linearly varying normal loads N(sub x) and N(sub y) in addition to a constant shear load N(sub xy). The applied loads can be divided into two parts: a preload component; and a variable (eigenvalue-dependent) component. The analysis is based on the modified Donnell's equations for shallow shells. The governing equations are solved by Galerkin's method.

Skin-stringer panel normal mode response experimental data and finite element computer program documentation

NASA Technical Reports Server (NTRS)

Rudder, F. F., Jr.

1971-01-01

Detailed information is presented for the analytical and the experimental programs described in the report on Effects of Design Details on Structural Response to Acoustic Excitation, NASA CR-1959. This is a supplement to the basic report and detailed experimental data from all the specimens described in that report are discussed and presented in tabular form.

78 FR 16860 - National Heart, Lung, and Blood Institute; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... Emphasis Panel; Side Effects of Transfusion and Cellular Therapies. Date: April 8, 2013. Time: 8:30 a.m. to... . (Catalogue of Federal Domestic Assistance Program Nos. 93.233, National Center for Sleep Disorders Research...

The Effect of Using a Program Based on Cooperative Learning Strategy on Developing some Oral Communication Skills of Students, at English Department, Faculty of Education, Sana'a University

ERIC Educational Resources Information Center

Zuheer, Khaled Mohsen Mohammed

2008-01-01

The purpose of study is to investigate the effective of using a cooperative learning strategy STAD-based program on developing some oral communication skills of second level students, English Department, Faculty of Education, Sana'a University. Based on literature review, related studies and a panel of jury members' point of view, a list of 5 oral…

PANEL LIBRARY AND EDITOR

NASA Technical Reports Server (NTRS)

Raible, E.

1994-01-01

The Panel Library and Editor is a graphical user interface (GUI) builder for the Silicon Graphics IRIS workstation family. The toolkit creates "widgets" which can be manipulated by the user. Its appearance is similar to that of the X-Windows System. The Panel Library is written in C and is used by programmers writing user-friendly mouse-driven applications for the IRIS. GUIs built using the Panel Library consist of "actuators" and "panels." Actuators are buttons, dials, sliders, or other mouse-driven symbols. Panels are groups of actuators that occupy separate windows on the IRIS workstation. The application user can alter variables in the graphics program, or fire off functions with a click on a button. The evolution of data values can be tracked with meters and strip charts, and dialog boxes with text processing can be built. Panels can be stored as icons when not in use. The Panel Editor is a program used to interactively create and test panel library interfaces in a simple and efficient way. The Panel Editor itself uses a panel library interface, so all actions are mouse driven. Extensive context-sensitive on-line help is provided. Programmers can graphically create and test the user interface without writing a single line of code. Once an interface is judged satisfactory, the Panel Editor will dump it out as a file of C code that can be used in an application. The Panel Library (v9.8) and Editor (v1.1) are written in C-Language (63%) and Scheme, a dialect of LISP, (37%) for Silicon Graphics 4D series workstations running IRIX 3.2 or higher. Approximately 10Mb of disk space is required once compiled. 1.5Mb of main memory is required to execute the panel editor. This program is available on a .25 inch streaming magnetic tape cartridge in UNIX tar format for an IRIS, and includes a copy of XScheme, the public-domain Scheme interpreter used by the Panel Editor. The Panel Library Programmer's Manual is included on the distribution media. The Panel Library and Editor were released to COSMIC in 1991. Silicon Graphics, IRIS, and IRIX are trademarks of Silicon Graphics, Inc. X-Window System is a trademark of Massachusetts Institute of Technology.

Numerical optimization techniques for bound circulation distribution for minimum induced drag of Nonplanar wings: Computer program documentation

NASA Technical Reports Server (NTRS)

Kuhlman, J. M.; Ku, T. J.

1981-01-01

A two dimensional advanced panel far-field potential flow model of the undistorted, interacting wakes of multiple lifting surfaces was developed which allows the determination of the spanwise bound circulation distribution required for minimum induced drag. This model was implemented in a FORTRAN computer program, the use of which is documented in this report. The nonplanar wakes are broken up into variable sized, flat panels, as chosen by the user. The wake vortex sheet strength is assumed to vary linearly over each of these panels, resulting in a quadratic variation of bound circulation. Panels are infinite in the streamwise direction. The theory is briefly summarized herein; sample results are given for multiple, nonplanar, lifting surfaces, and the use of the computer program is detailed in the appendixes.

Technology transfer within the government

NASA Technical Reports Server (NTRS)

Christensen, Carissa Bryce

1992-01-01

The report of a workshop panel concerned with technology transfer within the government is presented. The suggested subtopics for the panel were as follows: (1) transfer from non-NASA U.S. government technology developers to NASA space missions/programs; and (2) transfer from NASA to other U.S. government civil space mission programs. Two presentations were made to the panel: Roles/Value of Early Strategic Planning Within the Space Exploration Initiative (SEI) to Facilitate Later Technology Transfer To and From Industry; and NOAA Satellite Programs and Technology Requirements. The panel discussion addresses the following major issues: DOD/NASA cooperation; alternative mechanisms for interagency communication and interactions; current technology transfer relationships among federal research agencies, and strategies for improving this transfer; technology transfer mechanisms appropriate to intragovernment transfer; the importance of industry as a technology transfer conduit; and measures of merit.

Cream-Skimming, Parking and Other Intended and Unintended Effects of High-Powered, Performance-Based Contracts

ERIC Educational Resources Information Center

Koning, Pierre; Heinrich, Carolyn J.

2013-01-01

As performance-based contracting in social welfare services continues to expand, concerns about potential unintended effects are also growing. We analyze the incentive effects of high-powered, performance-based contracts and their implications for program outcomes using panel data on Dutch cohorts of unemployed and disabled workers that were…

Performance degradation and cleaning of photovoltaic arrays

NASA Technical Reports Server (NTRS)

Sheskin, T. J.; Chang, G. C.; Cull, R. C.; Knapp, W. D.

1982-01-01

NASA tests results from an 18 mo program of cleaning silicone-encapsulated and glass fronted solar cell panels in urban and desert environments to examine the effects of cleaning on module performance are reported. The panels were cleaned on weekly, monthly, quarterly, or semi-annual basis, while other panels of the same construction were not cleaned and served as controls. Commercially-available detergents and city water were employed for the tests, and the measurements were maintained of the modules' continuing short-circuit current output. The decay of the output was determined by least square regression analyses. Performance degradation was noticeably less in glass covered, rather than silicone-encapsulated modules which decayed faster in urban than in desert environments. Lower frequency cleanings are recommended where labor costs are high.

Potential biomarker panels in overall breast cancer management: advancements by multilevel diagnostics.

PubMed

Girotra, Shantanu; Yeghiazaryan, Kristina; Golubnitschaja, Olga

2016-09-01

Breast cancer (BC) prevalence has reached an epidemic scale with half a million deaths annually. Current deficits in BC management include predictive and preventive approaches, optimized screening programs, individualized patient profiling, highly sensitive detection technologies for more precise diagnostics and therapy monitoring, individualized prediction and effective treatment of BC metastatic disease. To advance BC management, paradigm shift from delayed to predictive, preventive and personalized medical services is essential. Corresponding step forwards requires innovative multilevel diagnostics procuring specific panels of validated biomarkers. Here, we discuss current instrumental advancements including genomics, proteomics, epigenetics, miRNA, metabolomics, circulating tumor cells and cancer stem cells with a focus on biomarker discovery and multilevel diagnostic panels. A list of the recommended biomarker candidates is provided.

76 FR 57748 - National Cancer Institute Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Cancer Institute Special Emphasis Panel; Core Infrastructure and Methodological Research for Cancer... Review Officer, Research Programs Review Branch, Division of Extramural Activities, National Cancer... Panel; Community Clinical Oncology Program Research Bases (U10). Date: November 9, 2011. Time: 8:30 a.m...

77 FR 61433 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 2095 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Person: Dr. Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program...

77 FR 6826 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 25503 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Dr. Sean L. Jones, Program Director, Materials Research Science and Engineering Centers Program...

78 FR 5505 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and.... Charles Bouldin, Program Director, Materials Research Science and Engineering Centers Program, Division of...

76 FR 62415 - Medicare Program; Establishment of the Medicare Economic Index Technical Advisory Panel and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

..., and productivity adjustment. We noted that we would ask the panel to assess the relevance and accuracy..., price-measurement proxies, and productivity adjustment. The Panel will be asked to assess the relevance...

Computer programs to predict induced effects of jets exhausting into a crossflow

NASA Technical Reports Server (NTRS)

Perkins, S. C., Jr.; Mendenhall, M. R.

1984-01-01

A user's manual for two computer programs was developed to predict the induced effects of jets exhausting into a crossflow. Program JETPLT predicts pressures induced on an infinite flat plate by a jet exhausting at angles to the plate and Program JETBOD, in conjunction with a panel code, predicts pressures induced on a body of revolution by a jet exhausting normal to the surface. Both codes use a potential model of the jet and adjacent surface with empirical corrections for the viscous or nonpotential effects. This program manual contains a description of the use of both programs, instructions for preparation of input, descriptions of the output, limitations of the codes, and sample cases. In addition, procedures to extend both codes to include additional empirical correlations are described.

Session: Program Review X Wrap-Up

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1992-01-01

This wrap-up session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of Closing Remarks by Roland R. Kessler and six NGA Industry Critique Panel presentations: ''Summary of Comments on DOE-Industry Cooperation by Geothermal Industry Panel'' by James B. Koenig, GeothermEx, Inc.; ''NGA Industry Critique of the Exploration Component'' by Joe L. Iovenitti, Weiss Associates; ''Critique of Drilling Research'' by Jerry Hamblin, UNOCAL Geothermal; ''Critique Panel Comments on Reservoir Engineering, DOE Geothermal Technology Development'' by Dennis Kaspereit, California Energy Company, Inc.; ''DOE Geothermal Program Review - Critique on Production'' by Douglas B. Jung, Two-Phase Engineeringmore » and Research; ''Comments on the DOE Hydrothermal Energy Conversion R&D Program'' by David L. Mendive, Geothermal Development Associates.« less

PANDA2: Program for Minimum Weight Design of Stiffened, Composite, Locally Buckled Panels

DTIC Science & Technology

1986-09-01

a flat panel or a panel that spans less than about 45 degrees of circumference. However, in PANDA2 complete cylindrical shells can be treated by the...compression and that corresponding to maximum in-plane shear. It is usually best to treat complete cylindrical shells in this way rather than try to set up a...to treat panels, not complete cylindrical shells. Therefore, it is best applied to panels. In PANDA2 the curved edges of a cylindrical panel lie in

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel on the space shuttle program. Part 2: Summary of information developed in the panel's fact-finding activities

NASA Technical Reports Server (NTRS)

1976-01-01

Safety management areas of concern include the space shuttle main engine, shuttle avionics, orbiter thermal protection system, the external tank program, and the solid rocket booster program. The ground test program and ground support equipment system were reviewed. Systems integration and technical 'conscience' were of major priorities for the investigating teams.

A Qualitative Evaluation of Ethics Educational Program in Health Science1

PubMed Central

Ekmekci, Perihan Elif; Oral, Murat; Yurdakul, Eray Serdar

2015-01-01

This paper originates from a panel discussion on the evaluation of “Ethics Educational Program in Health Sciences” held during the IAEE Conference 2014 Ankara, Turkey. The participants of the panel had consultations to solidify the concepts about the topic. The qualitative data out of these antecedent discussions became mature with the contributions in the panel. The outcome of this qualitative study mainly focuses on the examples of two current curricula; one from PhD on History of Medicine and Medical Ethics, the other one from an elective course on medical ethics as a part of a PhD program on Pharmacy Management and History, followed by the major challenges the trainees face during their education, their expectations and whether the program was satisfactory, the aspects of the programs which are prone to improvement and their overall evaluations of the programs. PMID:26664129

Cystic fibrosis newborn screening programs: implications of the CFTR variant spectrum in nonwhite patients.

PubMed

Pique, Lynn; Graham, Steve; Pearl, Michelle; Kharrazi, Martin; Schrijver, Iris

2017-01-01

Cystic fibrosis newborn screening (CFNBS) has been offered across the United States since 2010. However, as compared with white patients with CF, CFTR variant identification in nonwhite populations remains inequitable. Utilizing the recent characterization of the nonwhite CF variant spectrum, we examined the effectiveness of current CFNBS molecular panels in identifying affected nonwhite newborns. Based on a cross-sectional evaluation of genotyping data from the CF Foundation Patient Registry that compared 3,496 nonwhite with 22,206 white CF patients, the current CFNBS algorithms used in the 50 states and the District of Columbia were analyzed. We assessed the percentage of CF patients of Hispanic, African, Asian, and Native American heritage who would not be identified by the molecular panels most commonly used. Compared with whites, variant detection was significantly lower in Hispanic, black, and Asian newborns (P ≤ 0.0001 each), as well as in Native American newborns (P values ranged from 0.001 to 0.0003), for the most common CFNBS panels. This study provides a perspective on the applicability of current panels to a diverse population and enables CFNBS programs to consider more inclusive test approaches to facilitate diagnosis, timely clinical intervention, and enhanced prognosis for CF patients of nonwhite and mixed ethnicities.Genet Med 19 1, 36-44.

Content Validity of National Post Marriage Educational Program Using Mixed Methods

PubMed Central

MOHAJER RAHBARI, Masoumeh; SHARIATI, Mohammad; KERAMAT, Afsaneh; YUNESIAN, Masoud; ESLAMI, Mohammad; MOUSAVI, Seyed Abbas; MONTAZERI, Ali

2015-01-01

Background: Although the validity of content of program is mostly conducted with qualitative methods, this study used both qualitative and quantitative methods for the validation of content of post marriage training program provided for newly married couples. Content validity is a preliminary step of obtaining authorization required to install the program in country's health care system. Methods: This mixed methodological content validation study carried out in four steps with forming three expert panels. Altogether 24 expert panelists were involved in 3 qualitative and quantitative panels; 6 in the first item development one; 12 in the reduction kind, 4 of them were common with the first panel, and 10 executive experts in the last one organized to evaluate psychometric properties of CVR and CVI and Face validity of 57 educational objectives. Results: The raw data of post marriage program had been written by professional experts of Ministry of Health, using qualitative expert panel, the content was more developed by generating 3 topics and refining one topic and its respective content. In the second panel, totally six other objectives were deleted, three for being out of agreement cut of point and three on experts' consensus. The validity of all items was above 0.8 and their content validity indices (0.8–1) were completely appropriate in quantitative assessment. Conclusion: This study provided a good evidence for validation and accreditation of national post marriage program planned for newly married couples in health centers of the country in the near future. PMID:26056672

ED-Media 94--World Conference on Educational Multimedia and Hypermedia (Vancouver, British Columbia, Canada, June 25-30, 1994). Panel Discussions.

ERIC Educational Resources Information Center

Boyle, Tom; And Others

Six conference panel discussions on uses of technology in education are presented. The first panel, "The Use of Hypermedia in the Teaching and Learning of Programming" (Tom Boyle, Chair, and others) discusses achievements in hypermedia-based instruction, design needs, and experiences. The second panel, "Virtual Clayoquot Video…

78 FR 73547 - Medicare Program; Semi-Annual Meeting of the Advisory Panel on Hospital Outpatient Payment (HOP...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

...) March 10-11, 2014 AGENCY: Centers for Medicare & Medicaid Services (CMS), Department of Health and Human... Advisory Panel on Hospital Outpatient Payment (the Panel) for 2014. The purpose of the Panel is to advise... therapeutic services supervision issues. DATES: Meeting Dates: The first semi-annual meeting in 2014 is...

Estimating Causal Effects from Family Planning Health Communication Campaigns Using Panel Data: The “Your Health, Your Wealth” Campaign in Egypt

PubMed Central

Hutchinson, Paul L.; Meekers, Dominique

2012-01-01

Background Health communication campaigns – involving mass media and interpersonal communication - have long been utilized by national family planning programs to create awareness about contraceptive methods, to shift social norms related to fertility control, and to promote specific behaviors, such as the use of condoms, injectable methods or permanent sterilization. However, demonstrating the effectiveness of these campaigns is often complicated because the infeasibility of experimental designs generally yields statistically non-equivalent samples of campaign-exposed and unexposed individuals. Methods Using data from a panel survey of reproductive age women in Egypt, we estimate the effects of the multimedia health communication campaign “Your Health, Your Wealth” (“Sahatek Sarwetek”) on precursors to contraceptive use (e.g., spousal communication, birth spacing attitudes) and on modern contraceptive use. Difference-in-differences and fixed effects estimators that exploit the panel nature of the data are employed to control for both observed and unobserved heterogeneity in the sample of women who self-report recall of the messages, thereby potentially improving upon methods that make no such controls or that rely solely on cross-sectional data. Findings All of the estimators find positive effects of the “Your Health, Your Wealth” campaign on reproductive health outcomes, though the magnitudes of those effects diverge, often considerably. Difference-in-differences estimators find that exposure to the campaign increases the likelihood of spousal discussions by 14.4 percentage points (pp.) (SE = .039, p<0.001) but has no effect on contraceptive use. In contrast, the fixed effects, instrumental variables estimator, controlling for unobserved heterogeneity, finds a large, statistically significant effect on modern contraceptive use (27.4 pp., SE = 0.135, p = 0.043). Conclusions The difficulties of evaluating family planning communication programs may be surmountable using panel data and analytic methods that address both observed and unobserved heterogeneity in exposure. Not controlling for such effects may lead to substantial underestimates of the effectiveness of such campaigns. PMID:23049961

Using the surface panel method to predict the steady performance of ducted propellers

NASA Astrophysics Data System (ADS)

Cai, Hao-Peng; Su, Yu-Min; Li, Xin; Shen, Hai-Long

2009-12-01

A new numerical method was developed for predicting the steady hydrodynamic performance of ducted propellers. A potential based surface panel method was applied both to the duct and the propeller, and the interaction between them was solved by an induced velocity potential iterative method. Compared with the induced velocity iterative method, the method presented can save programming and calculating time. Numerical results for a JD simplified ducted propeller series showed that the method presented is effective for predicting the steady hydrodynamic performance of ducted propellers.

76 FR 36156 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

.... PROGRAM: This meeting will review applications for Art History I in Fellowships Program, submitted to the... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

76 FR 3641 - National Heart, Lung, and Blood Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Institute Special Emphasis Panel, Program Project in Cardiovascular Diseases. Date: February 8, 2011. Time... Blood Institute Special Emphasis Panel, Program Project in Cardiovascular Diseases. Date: February 9... Vascular Diseases Research; 93.838, Lung Diseases Research; 93.839, Blood Diseases and Resources Research...

77 FR 24227 - Proposal Review Panel for Social and Economic Sciences; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... Kronz, Program Director; Science, Technology and Society Program; Division of Social and Economic... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Social and Economic Sciences; Notice of... Science Foundation announces the following meeting: Name: Site visit review of the Nanoscale Science and...

77 FR 24228 - Proposal Review Panel for Social and Economic Sciences; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... open. Contact Person: Dr. Frederick Kronz, Program Director; Science, Technology, and Society Program... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Social and Economic Sciences; Notice of... Science Foundation announces the following meeting: Name: Site visit review of the Nanoscale Science and...

78 FR 41939 - National Institute of Allergy and Infectious Diseases; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Allergy and Infectious Diseases; Notice of Closed Meetings Pursuant to section 10(d) of the Federal... Infectious Diseases Special Emphasis Panel; NIAID Investigator Initiated Program Project Applications. Date... Allergy and Infectious Diseases Special Emphasis Panel; NIAID Investigator Initiated Program Project...

25 CFR 170.170 - How are Indian LTAP centers managed?

Code of Federal Regulations, 2010 CFR

2010-04-01

... ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Indian Local Technical Assistance... Center Director and staff, with the advice of its technical panel under the Indian LTAP agreements. FHWA... technical panel consisting of one BIA Regional Road Engineer, one FHWA representative, one state DOT...

Aerospace Safety Advisory Panel Annual Report February 1996

NASA Technical Reports Server (NTRS)

1996-01-01

The Aerospace Safety Advisory Panel (ASAP) presents its annual report covering February through December 1995. Findings and recommendations include the areas of the Space Shuttle Program, the International Space Station, Aeronautics, and Other. Information to support these findings is included in this report. NASA's response to last year's annual report is included as an appendix. With regards to the Space Shuttle Program, the panel addresses the potential for safety problems due to organizational changes by increasing its scrutiny of Space Shuttle operations and planning.

Factors Influencing the Accuracy of Aerodynamic Hinge-Moment Prediction

DTIC Science & Technology

1978-08-01

condition on the aft lifting surfaces and flaps. A new modeling technique for trailing-edge wake analysis using a potential- flow program based on the...control surface as depicLed in figure 21.. Three different models are used to simulate the flow on the wing, the flap, and the gaps. In the first two panel...ized sense, similar to that implemented in the FLEXSTAB program. The modeling of the wake on the side-edge gaps differs in the first two panel models

Nuclear Electric Propulsion Technology Panel findings and recommendations

NASA Technical Reports Server (NTRS)

Doherty, Michael P.

1992-01-01

Summarized are the findings and recommendations of a triagency (NASA/DOE/DOD) panel on Nuclear Electric Propulsion (NEP) Technology. NEP has been identified as a candidate nuclear propulsion technology for exploration of the Moon and Mars as part of the Space Exploration Initiative (SEI). The findings are stated in areas of system and subsystem considerations, technology readiness, and ground test facilities. Recommendations made by the panel are summarized concerning: (1) existing space nuclear power and propulsion programs, and (2) the proposed multiagency NEP technology development program.

Building and Operating Spacelab: Spacelab Design and Systems Engineering Panel

NASA Technical Reports Server (NTRS)

Roth, Axel; Berge, Klaus; Thirkettle, Alan; Craft, Harry G., Jr.; Benson, Robert

2000-01-01

This document is the transcription of the Spacelab Design and Systems Engineering Panel's discussion of the Spacelab program. It includes information on Spacelab's origin and development. The panel includes Klaus Berge, Bob Benson, Allan Thirkettle, and Harry Craft.

77 FR 11138 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... . Name of Committee: Center for Scientific Review Special Emphasis Panel; PAR10-225: Program Project... Emphasis Panel; RFA Panel: Developmental System Biology. Date: March 22-23, 2012. Time: 8 a.m. to 5:30 p.m... 11139

Implementation of a national external quality assessment program for medical laboratories in Burkina Faso: challenges, lessons learned, and perspectives.

PubMed

Sakandé, Jean; Nikièma, Abdoulaye; Kabré, Elie; Sawadogo, Charles; Nacoulma, Eric W; Sanou, Mamadou; Sangaré, Lassana; Traoré-Ouédraogo, Rasmata; Sawadogo, Mamadou; Gershy-Damet, Guy Michel

2014-02-01

The National External Quality Assessment (NEQA) program of Burkina Faso is a proficiency testing program mandatory for all laboratories in the country since 2006. The program runs two cycles per year and covers all areas of laboratories. All panels were validated by the expert committee before dispatch under optimal storage and transport conditions to participating laboratories along with report forms. Performance in the last 5 years varied by panel, with average annual performance of bacteriology panels for all laboratories rising from 75% in 2006 to 81% in 2010 and with a best average performance of 87% in 2007 and 2008. During the same period, malaria microscopy performance varied from 85% to 94%, with a best average performance of 94% in 2010; chemistry performance increased from 87% to 94%, with a best average annual performance of 97% in 2009. Hematology showed more variation in performance, ranging from 61% to 86%, with a best annual average performance of 90% in 2008. Average annual performance for immunology varied less between 2006 and 2010, recording 97%, 90%, and 95%. Except for malaria microscopy, annual performances for enrolled panels varied substantially from year to year, indicating some difficulty in maintaining consistency in quality. The main challenges of the NEQA program observed between 2006 to 2010 were funding, sourcing, and safe transportation of quality panels to all laboratories countrywide.

Optimization of Elastically Tailored Tow-Placed Plates with Holes

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.; Tatting, Brian F.; Guerdal, Zafer

2003-01-01

Elastic stiffness tailoring of laminated composite panels by allowing the fibers to curve within the plane of the laminate is a design concept that has been demonstrated to be both beneficial and practical. The objective of the present paper is to demonstrate the effectiveness of stiffness tailoring through the use of curvilinear fibers to reduce stress concentrations around the hole and improve the load carrying capability of panels. Preliminary panel designs that are to be manufactured and tested were determined through design studies for flat plates without holes under axial compression using an optimization program. These candidate designs were then analyzed with finite element models that accurately reflect the test conditions and geometries in order to decide upon the final designs for manufacture and testing. An advanced tow-placement machine is used to manufacture the test panels with varying fiber orientation angles. A total of six large panels measuring three feet by six feet, each of which is used to produce four specimens with or without holes, are fabricated. The panels were machined into specimens with holes and tested at NASA Langley Research Center. Buckling response and failure of panels without holes and with two different hole dimensions are presented. Buckling and failure loads of tow-steered specimens are significantly greater than the buckling and failure loads of traditional straight-fiber specimens.

Fatigue of graphite/epoxy buffer strip panels with center cracks

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1985-01-01

The effects of fatigue loading on the behavior of graphite/epoxy panels with either S-Glass or Kevlar-49 buffer strips is studied. Buffer strip panels are fatigued and tested in tension to measure their residual strength with crack-like damage. Panels are made with 45/0/-45/90 sub 2s layup with either S-Glass or Kevlar-49 buffer strip material. The buffer strips are parallel to the loading direction and made by replacing narrow strips of the 0-degree graphite plies with strips of either 0-degree S-Glass/epoxy or Kevlar-49/epoxy on a one-for-one basis. The panels are subjected to a fatigue loading spectrum MINITWIST, the shortened version of the standardized load program for the wing lower surface of a transport aircraft. Two levels of maximum strain are used in the spectrum with three durations of the fatigue spectrum. One group of panels is preloaded prior to the application of the fatigue cycling. The preload consists of statistically loading the spectrum in tension until the crack-tip damage zone reaches the ajacent buffer strips. After fatigue loading, all specimens are statistically loaded in tension to failure to determine their residual strengths.

24 CFR 200.944 - Supplementary specific requirements under the HUD building product standards and certification...

Code of Federal Regulations, 2012 CFR

2012-04-01

... rated wood-based structural-use panels. 200.944 Section 200.944 Housing and Urban Development... product standards and certification program for plywood and other performance rated wood-based structural... building product certification program. In the case of plywood and wood-based structural-use panels...

24 CFR 200.944 - Supplementary specific requirements under the HUD building product standards and certification...

Code of Federal Regulations, 2014 CFR

2014-04-01

... rated wood-based structural-use panels. 200.944 Section 200.944 Housing and Urban Development... product standards and certification program for plywood and other performance rated wood-based structural... building product certification program. In the case of plywood and wood-based structural-use panels...

24 CFR 200.944 - Supplementary specific requirements under the HUD building product standards and certification...

Code of Federal Regulations, 2013 CFR

2013-04-01

... rated wood-based structural-use panels. 200.944 Section 200.944 Housing and Urban Development... product standards and certification program for plywood and other performance rated wood-based structural... building product certification program. In the case of plywood and wood-based structural-use panels...

77 FR 56875 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... Resources grant program on the subject of Art History, submitted to the Division of Preservation and Access... of Art History, submitted to the Division of Public Programs. 14. Date: October 30, 2012. Time: 8:30... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National...

76 FR 75552 - National Institute of Allergy and Infectious Diseases; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... Allergy and Infectious Diseases; Notice of Closed Meetings Pursuant to section 10(d) of the Federal... Institute of Allergy and Infectious Diseases Special Emphasis Panel, NIAID Investigator Initiated Program... Institute of Allergy and Infectious Diseases Special Emphasis Panel, NIAID Investigator Initiated Program...

75 FR 30043 - Medicare Program; Meeting of the Advisory Panel on Medicare Education

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... [Medicare Advantage] in order to promote an active, informed selection among such options.'' The Panel is... Program; Yanira Cruz, PhD, President and Chief Executive Officer, National Hispanic Council on Aging... Health; Sandy Markwood, Chief Executive Officer, National Association of Area Agencies on Aging; David W...

78 FR 16711 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National... Foundation on the Arts and Humanities Act of 1965 (20 U.S.C. 951-960, as amended). DATES: See SUPPLEMENTARY... grant program on the subject of the Arts, submitted to the Division of Research Programs. [[Page 16712...

24 CFR 200.944 - Supplementary specific requirements under the HUD building product standards and certification...

Code of Federal Regulations, 2011 CFR

2011-04-01

... rated wood-based structural-use panels. 200.944 Section 200.944 Housing and Urban Development... product standards and certification program for plywood and other performance rated wood-based structural... building product certification program. In the case of plywood and wood-based structural-use panels...

24 CFR 200.944 - Supplementary specific requirements under the HUD building product standards and certification...

Code of Federal Regulations, 2010 CFR

2010-04-01

... rated wood-based structural-use panels. 200.944 Section 200.944 Housing and Urban Development... product standards and certification program for plywood and other performance rated wood-based structural... building product certification program. In the case of plywood and wood-based structural-use panels...

77 FR 18999 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-29

... Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The... the Hyatt Place Albuquerque/ Uptown, 6901 Arvada Avenue NE., Albuquerque, NM 87110, (505) 872-9000... Service, 333 Broadway SE., Albuquerque, NM 87102. Comments may also be sent via email to [email protected

75 FR 34973 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The... meeting will be held at the Hyatt Place Albuquerque/ Uptown, 6901 Arvada Avenue, NE., Albuquerque, NM... International Forestry Staff, USDA Forest Service, 333 Broadway SE., Albuquerque, NM 87102. Comments may also be...

Effects of a Hypertension Management Program by Seongcheon Primary Health Care Post in South Korea: An Analysis of Changes in the Level of Knowledge of Hypertension in the Period from 2004 to 2009

ERIC Educational Resources Information Center

Song, In Han; Kim, Sang-A; Park, Woong-Sub

2012-01-01

The objective of this study was to examine the effects of a hypertension management program provided by a primary health care post located in a distant rural area in South Korea on the level of knowledge of hypertension. The panel data consisted of a total of 319 people or the entire population aged above 40 years of five villages located in…

Modification of the Douglas Neumann program to improve the efficiency of predicting component interference and high lift characteristics

NASA Technical Reports Server (NTRS)

Bristow, D. R.; Grose, G. G.

1978-01-01

The Douglas Neumann method for low-speed potential flow on arbitrary three-dimensional lifting bodies was modified by substituting the combined source and doublet surface paneling based on Green's identity for the original source panels. Numerical studies show improved accuracy and stability for thin lifting surfaces, permitting reduced panel number for high-lift devices and supercritical airfoil sections. The accuracy of flow in concave corners is improved. A method of airfoil section design for a given pressure distribution, based on Green's identity, was demonstrated. The program uses panels on the body surface with constant source strength and parabolic distribution of doublet strength, and a doublet sheet on the wake. The program is written for the CDC CYBER 175 computer. Results of calculations are presented for isolated bodies, wings, wing-body combinations, and internal flow.

Effectiveness of the United Steel Workers of America Coke Oven Intervention Program.

PubMed

Parkinson, D K; Bromet, E J; Dew, M A; Dunn, L O; Barkman, M; Wright, M

1989-05-01

This paper describes the implementation and evaluation of the Coke Oven Intervention Program developed jointly by the United Steel Workers of America and the University of Pittsburgh. The program was offered on four occasions at each of seven coke oven plants over a 2-year period. Participants were compared with nonparticipating co-workers and controls from matched plants on knowledge of the Coke Oven Standard and workplace behaviors. Few baseline differences were found among participants, nonparticipants, and controls. Participants improved significantly as a result of the program, with those attending multiple programs accruing the greatest benefits. Panel controls interviewed on six occasions throughout the 2-year period showed little improvement. Reasons for and implications of the effectiveness of the program are discussed.

Modeling drying of three-dimensional pulp molded structures. Part I, Experimental program

Treesearch

Heike Nyist; John F. Hunt; Margit Tamasy-Bano

1998-01-01

Researchers at the USDA Forest Products Laboratory have developed a new three-dimensional structural panel, called FPL Spaceboard. This panel is formed using a U.S. patented three-dimensional mold capable of using a variety of fibrous materials with either the wet- or dry-forming process. Structurally, the panel departs from the traditional two-dimensional panel by...

77 FR 2948 - Notice of Funding Availability for the Rural Energy for America Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-20

.... For example, a rural small business owner owns five retail stores and wishes to install solar panels... solar panels on the five stores. However, if this same owner wishes to install solar panels on three of... for either the solar panels or for the wind turbines in the same fiscal year. (7) Applications from...

Material development for laminar flow control wing panels

NASA Technical Reports Server (NTRS)

Meade, L. E.

1977-01-01

The absence of suitable porous materials or techniques for the economic perforation of surface materials has previously restricted the design of laminar flow control (LFC) wing panels to a consideration of mechanically slotted LFC surfaces. A description is presented of a program which has been conducted to exploit recent advances in materials and manufacturing technology for the fabrication of reliable porous or perforated LFC surface panels compatible with the requirements of subsonic transport aircraft. Attention is given to LFC design criteria, surface materials, surface concepts, the use of microporous composites, perforated composites, and perforated metal. The described program was successful in that fabrication processes were developed for producing predictable perforated panels both of composite and of metal.

The Study of Stability of Compression-loaded Multispan Composite Panel Upon Failure of elements Binding it to Panel Supports

NASA Technical Reports Server (NTRS)

Zamula, G. N.; Ierusalimsky, K. M.; Fomin, V. P.; Grishin, V. I.; Kalmykova, G. S.

1999-01-01

The present document is a final technical report under the NCC-1-233 research program (dated September 15, 1998; see Appendix 5) carried out within co-operation between United States'NASA Langley RC and Russia's Goskomoboronprom in aeronautics, and continues similar programs, NCCW-73, NCC-1-233 and NCCW 1-233 accomplished in 1996, 1997, and 1998, respectively. The report provides results of "The study of stability of compression-loaded multispan composite panels upon failure of elements binding it to panel supports"; these comply with requirements established at TsAGI on 24 March 1998 and at NASA on 15 September 1998.

Detecting damage in full-scale honeycomb sandwich composite curved fuselage panels through frequency response

NASA Astrophysics Data System (ADS)

Leone, Frank A., Jr.; Ozevin, Didem; Mosinyi, Bao; Bakuckas, John G., Jr.; Awerbuch, Jonathan; Lau, Alan; Tan, Tein-Min

2008-03-01

Preliminary tests were conducted using frequency response (FR) characteristics to determine damage initiation and growth in a honeycomb sandwich graphite/epoxy curved panel. This investigation was part of a more general study investigating the damage tolerance characteristics of several such panels subjected to quasi-static internal pressurization combined with hoop and axial loading. The panels were tested at the Full-Scale Aircraft Structural Test Evaluation and Research (FASTER) facility located at the Federal Aviation Administration William J. Hughes Technical Center in Atlantic City, NJ. The overall program objective was to investigate the damage tolerance characteristics of full-scale composite curved aircraft fuselage panels and the evolution of damage under quasi-static loading up to failure. This paper focuses on one aspect of this comprehensive investigation: the effect of state-of-damage on the characteristics of the frequency response of the subject material. The results presented herein show that recording the frequency response could be used for real-time monitoring of damage growth and in determining damage severity in full-scale composites fuselage aircraft structures.

The Efficiency of Split Panel Designs in an Analysis of Variance Model

PubMed Central

Wang, Wei-Guo; Liu, Hai-Jun

2016-01-01

We consider split panel design efficiency in analysis of variance models, that is, the determination of the cross-sections series optimal proportion in all samples, to minimize parametric best linear unbiased estimators of linear combination variances. An orthogonal matrix is constructed to obtain manageable expression of variances. On this basis, we derive a theorem for analyzing split panel design efficiency irrespective of interest and budget parameters. Additionally, relative estimator efficiency based on the split panel to an estimator based on a pure panel or a pure cross-section is present. The analysis shows that the gains from split panel can be quite substantial. We further consider the efficiency of split panel design, given a budget, and transform it to a constrained nonlinear integer programming. Specifically, an efficient algorithm is designed to solve the constrained nonlinear integer programming. Moreover, we combine one at time designs and factorial designs to illustrate the algorithm’s efficiency with an empirical example concerning monthly consumer expenditure on food in 1985, in the Netherlands, and the efficient ranges of the algorithm parameters are given to ensure a good solution. PMID:27163447

Climate change policy : preliminary observations on options for distributing emissions allowances and revenue under a cap-and-trade program

DOT National Transportation Integrated Search

2009-08-01

According to the Intergovernmental Panel on Climate Changea United Nations organization that assesses scientific, technical, and economic information on the effects of climate changeglobal atmospheric concentrations of greenhouse gases have inc...

Review of Relocation of the System Program Office and Logistics Support for the F-117A Stealth Fighter

DTIC Science & Technology

1998-04-10

LMSW. Cost of Repair Number Avoided Nomenclature New Part Cost Repaired Cost Wing platypus panel $60,100 $4,500 10 $ 556,000 Lower rear door panel...72,200 7,000 48 3,129,600 Rear door trailing 76,000 6,000 2 140,000 edge panel Inboard platypus panel 56,000 4,200 46 2,410,400 Outboard platypus panel...Composites Shop’s contribution to resolving the problem consisted of the redesign of the wing and inboard and outboard platypus panels. The Advanced

45 CFR 1801.23 - Recommendation by panel.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Public Welfare Regulations Relating to Public Welfare (Continued) HARRY S. TRUMAN SCHOLARSHIP FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.23 Recommendation by panel. (a) Each Panel is..., it does not provide a recommendation. The Foundation will carry over the Scholarship for that state...

45 CFR 1801.23 - Recommendation by panel.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Public Welfare Regulations Relating to Public Welfare (Continued) HARRY S. TRUMAN SCHOLARSHIP FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.23 Recommendation by panel. (a) Each Panel is..., it does not provide a recommendation. The Foundation will carry over the Scholarship for that state...

45 CFR 1801.23 - Recommendation by panel.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Public Welfare Regulations Relating to Public Welfare (Continued) HARRY S. TRUMAN SCHOLARSHIP FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.23 Recommendation by panel. (a) Each Panel is..., it does not provide a recommendation. The Foundation will carry over the Scholarship for that state...

Analytical and experimental study of structurally efficient composite hat-stiffened panels loaded in axial compression

NASA Technical Reports Server (NTRS)

Williams, J. G.; Mikulus, M. M., Jr.

1976-01-01

Structural efficiency studies were made to determine the weight saving potential of graphite/epoxy composite structures for compression panel applications. Minimum weight hat-stiffened and open corrugation configurations were synthesized using a nonlinear mathematical programming technique. Selected configurations were built and tested to study local and Euler buckling characteristics. Test results for 23 panels critical in local buckling and six panels critical in Euler buckling are compared with analytical results obtained using the BUCLASP-2 branched plate buckling program. A weight efficiency comparison is made between composite and aluminum compression panels using metal test data generated by the NACA. Theoretical studies indicate that potential weight savings of up to 50% are possible for composite hat-stiffened panels when compared with similar aluminum designs. Weight savings of 32% to 42% were experimentally achieved. Experience suggests that most of the theoretical weight saving potential is available if design deficiencies are eliminated and strict fabrication control is exercised.

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part two: strengthening exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Mizusaki Imoto, Aline; Toupin-April, Karine; Westby, Marie; Álvarez Gallardo, Inmaculada C; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective strengthening exercise programs and provide rehabilitation teams and patients with updated, high-quality recommendations concerning traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with strengthening exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+ or D-) was based on statistical significance ( p < 0.5) and clinical importance (⩾15% improvement). The 26 high-quality studies identified demonstrated that various strengthening exercise programs with/without other types of therapeutic exercises are generally effective for improving knee osteoarthritis management within a six-month period. Strengthening exercise programs demonstrated a significant improvement for pain relief (four Grade A, ten Grade B, two Grade C+), physical function (four Grade A, eight Grade B) and quality of life (three Grade B). Strengthening in combination with other types of exercises (coordination, balance, functional) showed a significant improvement in pain relief (three Grade A, 11 Grade B, eight Grade C+), physical function (two Grade A, four Grade B, three Grade C+) and quality of life (one Grade A, one Grade C+). There are a variety of choices for strengthening exercise programs with positive recommendations for healthcare professionals and knee osteoarthritis patients. There is a need to develop combined behavioral and muscle-strengthening strategies to improve long-term maintenance of regular strengthening exercise programs.

Review of the magnetic fusion program by the 1986 ERAB Fusion Panel

NASA Astrophysics Data System (ADS)

Davidson, Ronald C.

1987-09-01

The 1986 ERAB Fusion Panel finds that fusion energy continues to be an attractive energy source with great potential for the future, and that the magnetic fusion program continues to make substantial technical progress. In addition, fusion research advances plasma physics, a sophisticated and useful branch of applied science, as well as technologies important to industry and defense. These factors fully justify the substantial expenditures by the Department of Energy in fusion research and development (R&D). The Panel endorses the overall program direction, strategy, and plans, and recognizes the importance and timeliness of proceeding with a burning plasma experiment, such as the proposed Compact Ignition Tokamak (CIT) experiment.

Structural and thermal testing of lightweight reflector panels

NASA Technical Reports Server (NTRS)

Mcgregor, J.; Helms, R.; Hill, T.

1992-01-01

The paper describes the test facility developed for testing large lightweight reflective panels with very accurate and stable surfaces, such as the mirror panels of composite construction developed for the NASA's Precision Segmented Reflector (PSR). Special attention is given to the panel construction and the special problems posed by the characteristics of these panels; the design of the Optical/Thermal Vacuum test facility for structural and thermal testing, developed at the U.S. AFPL; and the testing procedure. The results of the PSR panel test program to date are presented. The test data showed that the analytical approaches used for the panel design and for the prediction of the on-orbit panel behavior were adequate.

The Work Incentive Program: Making Adults Economically Independent. Volume I.

ERIC Educational Resources Information Center

Klausner, Samuel Z.; And Others

In an examination of the role of the Work Incentive (WIN) Program, particularly its training activities, in adult resocialization, data were gathered by questionnaires administered, one year apart, to a panel of husbandless mothers receiving Aid to Families with Dependent Children (AFDC) and a panel of husbandless mothers who had participated in a…

NOAA Office of Exploration and Research > Data Access > Publications

Science.gov Websites

2014 Funding Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Affiliate Locations Strategic Plan 2014 Funding Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Presentations Supporting Documents Guiding Documents Exploration Overview

76 FR 13195 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

...: Center for Scientific Review Special Emphasis Panel; Program Project: Presynaptic Mechanisms of Neural...: AIDS/HIV Innovative Research Applications. Date: March 30, 2011. Time: 11 a.m. to 7 p.m. Agenda: To... Special Emphasis Panel; Program Project: Mitochondrial Metabolism. Date: April 4-5, 2011. Time: 8 a.m. to...

77 FR 51032 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... personal privacy. Name of Committee: National Cancer Institute Special Emphasis Panel, NCI Program Project... Cancer Institute Special Emphasis Panel, NCI Program Project Meeting III. Date: October 10-11, 2012. Time... Project Meeting IV. Date: October 15-16, 2012. Time: 8:00 a.m. to 5:00 p.m. Agenda: To review and evaluate...

78 FR 16244 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The... at the Hyatt Place Albuquerque/ Uptown, 6901 Arvada Avenue NE., Albuquerque, NM 87110, (505) 872-9000... Service, 333 Broadway SE., Albuquerque, NM 87102. Comments may also be sent via email to [email protected

Statement of the Independent Review Panel of the National Assessment of Chapter 1.

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

The Independent Review Panel of the National Assessment of Chapter 1 recommends fundamental changes to the program, while endorsing its continuing vital role in meeting the special educational needs of poor and disadvantaged students. The program's focus on low-level basic skills, funding systems that discourage highest-level performance, money…

Advanced Technology Composite Fuselage: Program Overview

NASA Technical Reports Server (NTRS)

Ilcewicz, L. B.; Smith, P. J.; Hanson, C. T.; Walker, T. H.; Metschan, S. L.; Mabson, G. E.; Wilden, K. S.; Flynn, B. W.; Scholz, D. B.; Polland, D. R.;

Human support issues and systems for the space exploration initiative: Results from Project Outreach

NASA Technical Reports Server (NTRS)

Aroesty, J.; Zimmerman, R.; Logan, J.

1991-01-01

The analyses and evaluations of the Human Support panel are discussed. The Human Support panel is one of eight panels created by RAND to screen and analyze submissions to the Space Exploration Initiative (SEI) Outreach Program. Submissions to the Human Support panel were in the following areas: radiation protection; microgravity; life support systems; medical care; and human factors (behavior and performance).

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 2 2012-10-01 2012-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 2 2014-10-01 2014-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 2 2013-10-01 2013-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 2 2011-10-01 2011-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

76 FR 24922 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance... announces the following meeting: Name: Proposal Review Panel for Chemistry 1191. Date and Time: May 17, 2011...: Katharine Covert, Acting Deputy Division Director, Chemistry Centers Program, Division of Chemistry, Room...

76 FR 53119 - High Energy Physics Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... DEPARTMENT OF ENERGY High Energy Physics Advisory Panel AGENCY: Department of Energy. ACTION... hereby given that the High Energy Physics Advisory Panel will be renewed for a two-year period, beginning...-range planning and priorities in the national High Energy Physics program. Additionally, the renewal of...

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has little flexibility to begin long lead-time items for upgrades or contingency planning. For example, the section on computer hardware and software contains specific findings related to required longer range safety-related actions. NASA can be proud of its accomplishments this past year, but must remain ever vigilant, particularly as ISS assembly begins to accelerate. The Panel will continue to focus on both the short- and long-term aspects of risk management and safety planning. This task continues to be made manageable and productive by the excellent cooperation the Panel receives from both NASA and its contractors. Particular emphasis will continue to be directed to longer term workforce and program planning issues as well as the immediate risks associated with ISS assembly and the initial flights of the X-33 and X-34. Section 2 of this report presents specific findings and recommendations generated by ASAP activities during 1998. Section 3 contains more detailed information in support of these findings and recommendations. Appendix A is a current roster of Panel members, consultants, and staff. Appendix B contains NASA's response to the findings and recommendations from the 1997 ASAP Annual Report. Appendix C details the fact-finding activities of the Panel in 1998. During the year, Mr. Richard D. Blomberg was elected chair of the Panel and Vice Admiral (VADM) Robert F Dunn was elected deputy chair. VADM Bernard M. Kauderer moved from consultant to member. Mr. Charles J. Donlan retired from the Panel after many years of meritorious service. Ms. Shirley C. McCarty and Mr. Robert L. ('Hoot') Gibson joined the Panel as consultants.

Challenges and Concerns Faced by Doctoral Candidates Seeking Academic Positions.

ERIC Educational Resources Information Center

Porter, Dion; Donnell, Chandra; Buck, Tina; Edwards, Yolanda

A panel discussion offered suggestions and recommendations for faculty and institutions of rehabilitation counseling education on more effective recruitment methods. Strategies were also considered for potential faculty members. Candidates seeking academic positions in rehabilitation counseling education face many challenges. Location of program;…

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Mardoian, George H.; Ezzo, Maureen B.

1994-01-01

This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

Effect of Processing Parameters on Reliability of VARTM/SCRIMP Composite Panels - Phase 1

DTIC Science & Technology

2007-07-01

used in this program (Hess and Beach, 2000). The structural risks associated with new FRP composite ship structures can be mitigated by...reliability calibration of new designs. This program focuses on addressing the first and second tasks outlined above. 1.2. Phase I - Objectives The...Accomplishments: Tension Testing An optimized geometry for tension coupon testing was developed for marine grade composites. The new geometry reduces

Training Effectiveness Evaluation of Device A/F37A-T59

DTIC Science & Technology

1982-07-01

selected airplane by manually setting track, crosstrack, and altitude on thE control panel. Posi ion is maintained by flying the attitude director...simulator’s other design capabilities includes full SKE airdrop simulation, radar simulation, manual or pre-programmed malfunctions, a library of...during IFS testing, this feature was not available for this study. Thus, the instructors had to manually program all mission profiles prior to each

Coupling of Helmholtz resonators to improve acoustic liners for turbofan engines at low frequency

NASA Technical Reports Server (NTRS)

Dean, L. W.

1975-01-01

An analytical and test program was conducted to evaluate means for increasing the effectiveness of low frequency sound absorbing liners for aircraft turbine engines. Three schemes for coupling low frequency absorber elements were considered. These schemes were analytically modeled and their impedance was predicted over a frequency range of 50 to 1,000 Hz. An optimum and two off-optimum designs of the most promising, a parallel coupled scheme, were fabricated and tested in a flow duct facility. Impedance measurements were in good agreement with predicted values and validated the procedure used to transform modeled parameters to hardware designs. Measurements of attenuation for panels of coupled resonators were consistent with predictions based on measured impedance. All coupled resonator panels tested showed an increase in peak attenuation of about 50% and an increase in attenuation bandwidth of one one-third octave band over that measured for an uncoupled panel. These attenuation characteristics equate to about 35% greater reduction in source perceived noise level (PNL), relative to the uncoupled panel, or a reduction in treatment length of about 24% for constant PNL reduction. The increased effectiveness of the coupled resonator concept for attenuation of low frequency broad spectrum noise is demonstrated.

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

NASA Technical Reports Server (NTRS)

Johnson, R., Jr.; Killpatrick, D. H.

1973-01-01

The work reported constitutes the first phase of a two-phase program. Vehicle environments having critical effects on the thermal protection system are defined; TD Ni-20Cr material characteristics are reviewed and compared with TD Ni-20Cr produced in previous development efforts; cyclic load, temperature, and pressure effects on TD Ni-20Cr sheet material are investigated; the effects of braze reinforcement in improving the efficiency of spotwelded, diffusion-bonded, or seam-welded joints are evaluated through tests of simple lap-shear joint samples; parametric studies of metallic radiative thermal protection systems are reported; and the design, instrumentation, and testing of full-scale subsize heat shield panels are described. Tests of full-scale subsize panels included simulated meteoroid impact tests; simulated entry flight aerodynamic heating in an arc-heated plasma stream; programmed differential pressure loads and temperatures simulating mission conditions; and acoustic tests simulating sound levels experienced by heat shields during about boost flight. Test results are described, and the performances of two heat shield designs are compared and evaluated.

Drug utilization review: mechanisms to improve its effectiveness and broaden its scope. The U.S. Pharmacopeia Drug Utilization Review Advisory Panel.

PubMed

2000-01-01

To address important problems and needed changes in online and retrospective drug utilization review (DUR) programs. Emphasis is placed on reliability of DUR criteria and the shift of traditional retrospective DUR programs toward disease management and health care outcomes. Published literature evaluating the role of online and retrospective DUR programs. Particular attention was given to studies assessing DUR criteria reliability and new interventions with retrospective DUR programs. A literature review was conducted along with an expert summary from the U.S. Pharmacopeia Drug Utilization Review Advisory Panel. Studies have revealed variations in DUR criteria that could be affecting clinical practice and patient care. Appropriate formal methodologies and use of consistent procedures in developing online prospective DUR programs and systems could help resolve these problems. Traditional retrospective DUR is also shifting to incorporate disease management and methodologies from health outcomes and pharmacoeconomics studies. Refinements are needed to improve the reliability and validity of online DUR criteria and to minimize false positive messages. Databases created as a result of DUR efforts have been used in new and innovative ways to incorporate health outcomes data and disease management interventions. Additional outcomes data, combined with quality assurance efforts, should increase the utility of DUR/disease management efforts in evaluating health systems while improving the effectiveness and efficiency of pharmacists' health care interventions.

BUCLASP 2: A computer program for instability analysis of biaxially loaded composite stiffened panels and other structures

NASA Technical Reports Server (NTRS)

Tripp, L. L.; Tamekuni, M.; Viswanathan, A. V.

1973-01-01

The use of the computer program BUCLASP2 is described. The program is intended for linear instability analyses of structures such as unidirectionally stiffened panels. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plant strip elements can be analyzed. The loadings considered are combinations of axial compressive loads and in-plane transverse loads. The two parallel ends of the panel must be simply supported and arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. This manual consists of instructions for use of the program with sample problems, including input and output information. The theoretical basis of BUCLASP2 and correlations of calculated results with known solutions, are presented.

NTP-CERHR EXPERT PANEL REPORT ON THE REPRODUCTIVE AND DEVELOPMENTAL TOXICITY OF ACRYLAMIDE

EPA Science Inventory

The National Toxicology Program Center for the Evaluation of Risks to Human Reproduction (NTP-CERHR) convened an expert panel in May 2004 to evaluate acrylamide. The report of the expert panel, prepared in accordance with CERHR Guidelines, provides a detailed summary of all publi...

Panel discussion: The future of IR astronomy

NASA Technical Reports Server (NTRS)

Caroff, Lawrence J.

1995-01-01

A panel discussion was held on the future of IR astronomy. The chairman gave a brief introduction to current planned programs for NASA and other space agencies, followed by short contributions from the six panel members on a variety of special topics. After that, a short question and answer session was held.

77 FR 13172 - Occupational Information Development Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... recommendations will relate to our disability programs in the following areas: Medical and vocational analysis of... medical-vocational adjudication policies and processes. Agenda: The panel will meet on Thursday, March 22... allotted, the panel may use any remaining time to deliberate or conduct other business. Those interested in...

Safety of folic acid

PubMed Central

Field, Martha S.

2017-01-01

Abstract There is a large body of literature demonstrating the efficacy of maternal folic acid intake in preventing birth defects, as well as investigations into potential adverse consequences of consuming folic acid above the upper intake level (UL). Recently, two authoritative bodies convened expert panels to assess risks from high intakes of folic acid: the U.S. National Toxicology Program and the UK Scientific Advisory Committee on Nutrition. Overall, the totality of the evidence examined by these panels, as well as studies published since the release of their reports, have not established risks for adverse consequences resulting from existing mandatory folic acid fortification programs that have been implemented in many countries. Current folic acid fortification programs have been shown to support public health in populations, and the exposure levels are informed by and adherent to the precautionary principle. Additional research is needed to assess the health effects of folic acid supplement use when the current upper limit for folic acid is exceeded. PMID:29155442

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

NASA Technical Reports Server (NTRS)

Pineda, Evan Jorge; Myers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Kellas, Sotiris; Dixon, Genevieve D.; Krivanek, Thomas M.; Gyekenyesi, Thomas G.

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

Aerospace Safety Advisory Panel Annual Report for 1999

NASA Technical Reports Server (NTRS)

Blomberg, Richard D.

2000-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for the calendar year 1999.This was a year of notable achievements and significant frustrations. Both the Space Shuttle and International Space Station (ISS) programs were delayed.The Space Shuttle prudently postponed launches after the occurrence of a wiring short during ascent of the STS-93 mission. The ISS construction schedule slipped as a result of the Space Shuttle delays and problems the Russians experienced in readying the Service Module and its launch vehicle. Each of these setbacks was dealt with in a constructive way. The STS-93 short circuit led to detailed wiring inspections and repairs on all four orbiters as well as analysis of other key subsystems for similar types of hidden damage. The ISS launch delays afforded time for further testing, training, development, and contingency planning. The safety consciousness of the NASA and contractor workforces, from hands-on labor to top management, continues high. Nevertheless, workforce issues remain among the most serious safety concerns of the Panel. Cutbacks and reorganizations over the past several years have resulted in problems related to workforce size, critical skills, and the extent of on-the-job experience. These problems have the potential to impact safety as the Space Shuttle launch rate increases to meet the demands of the ISS and its other customers. As with last year's report, these work- force-related issues were considered of sufficient import to place them first in the material that follows. Some of the same issues of concern for the Space Shuttle and ISS arose in a review of the launch vehicle for the Terra mission that the Panel was asked by NASA to undertake. Other areas the Panel was requested to assess included the readiness of the Inertial Upper Stage for the deployment of the Chandra X-ray Observatory and the possible safety impact of electromagnetic effects on the Space Shuttle. The findings and recommendations in this report do not highlight any major, immediate issues that might compromise the safe pursuit of the various NASA programs. They do, however, cover concerns that the Panel believes should be addressed in the interest of maintaining NASA's excellent safety record.The Panel is pleased to note that remedial efforts for some of the findings raised are underway. Given appropriate funding and cooperative efforts among the Administration, the Congress and the various contractors, the Panel is convinced that safety problems can be avoided or solved resulting in lower risk for NASA's human space and aeronautics programs. Section II of this report contains specific findings and recommendations generated by Panel activities during the calendar year 1999. Section III presents more detailed information in support of these findings and recommendations. A current roster of Panel members, consultants, and staff is included as Appendix A. Appendix B contains NASA's response to the findings and recommendations from the 1998 annual report. It has been augmented this year to include brief explanations of why the Panel classified the NASA response as " open,""continuing," or "closed." Appendix C lists the fact-finding activities of the Panel in 1999.

Wind tunnel study of natural ventilation of building integrated photovoltaics double skin façade

NASA Astrophysics Data System (ADS)

Hudişteanu, Sebastian Valeriu; Popovici, Cătălin George; Cherecheş, Nelu-Cristian

2018-02-01

The paper presents a wind tunnel experimental analysis of a small-scale building model (1:30). The objective of the study is to determine the wind influence on the ventilation of a double skin façade channel (DSF) and the cooling effect over integrated photovoltaic panels. The tests were achieved by conceiving and implementation of an experimental program using a wind tunnel with atmospheric boundary layer. The effect of the wind over the ventilation of the horizontal channels of double skin façades is evaluated for different incident velocities. The results are generalized for the average steady state values of the velocities analysed. The experimental results put in evidence the correlation between the reference wind velocity and the dynamics of the air movement inside the double skin façade. These values are used to determine the convective heat transfer and the cooling effect of the air streams inside the channel upon the integrated photovoltaic panels. The decrease of the photovoltaic panels temperature determines a raise of 11% in efficiency and power generated.

Space Station Engineering and Technology Development. Proceedings of the Panel on Program Performance and Onboard Mission Control

NASA Technical Reports Server (NTRS)

1985-01-01

An ad-hoc committee was asked to review the following questions relevant to the space station program: (1) onboard maintainability and repair; (2) in-space research and technology program and facility plans; (3) solar thermodynamic research and technology development program planning; (4) program performance (cost estimating, management, and cost avoidance); (5) onboard versus ground-based mission control; and (6) technology development road maps from IOC to the growth station. The objective of these new assignments is to provide NASA with advice on ways and means for improving the content, performance, and/or effectiveness of these elements of the space station program.

The impact of case mix on timely access to appointments in a primary care group practice.

PubMed

Ozen, Asli; Balasubramanian, Hari

2013-06-01

At the heart of the practice of primary care is the concept of a physician panel. A panel refers to the set of patients for whose long term, holistic care the physician is responsible. A physician's appointment burden is determined by the size and composition of the panel. Size refers to the number of patients in the panel while composition refers to the case-mix, or the type of patients (older versus younger, healthy versus chronic patients), in the panel. In this paper, we quantify the impact of the size and case-mix on the ability of a multi-provider practice to provide adequate access to its empanelled patients. We use overflow frequency, or the probability that the demand exceeds the capacity, as a measure of access. We formulate problem of minimizing the maximum overflow for a multi-physician practice as a non-linear integer programming problem and establish structural insights that enable us to create simple yet near optimal heuristic strategies to change panels. This optimization framework helps a practice: (1) quantify the imbalances across physicians due to the variation in case mix and panel size, and the resulting effect on access; and (2) determine how panels can be altered in the least disruptive way to improve access. We illustrate our methodology using four test practices created using patient level data from the primary care practice at Mayo Clinic, Rochester, Minnesota. An important advantage of our approach is that it can be implemented in an Excel Spreadsheet and used for aggregate level planning and panel management decisions.

77 FR 27778 - Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel-May 21, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services [CMS-8050-N] Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel--May 21, 2012 Correction In notice document 2012-10702 appearing on pages 26553-26554 in the issue of Friday, May 4, 2012 make...

Modal analysis and dynamic stresses for acoustically excited shuttle insulation tiles

NASA Technical Reports Server (NTRS)

Ojalvo, I. U.; Ogilvie, P. L.

1975-01-01

Improvements and extensions to the RESIST computer program developed for determining the normalized modal stress response of shuttle insulation tiles are described. The new version of RESIST can accommodate primary structure panels with closed-cell stringers, in addition to the capability for treating open-cell stringers. In addition, the present version of RESIST numerically solves vibration problems several times faster than its predecessor. A new digital computer program, titled ARREST (Acoustic Response of Reusable Shuttle Tiles) is also described. Starting with modal information contained on output tapes from RESIST computer runs, ARREST determines RMS stresses, deflections and accelerations of shuttle panels with reusable surface insulation tiles. Both programs are applicable to stringer stiffened structural panels with or without reusable surface insulation titles.

Assessment of avionics technology in European aerospace organizations

NASA Technical Reports Server (NTRS)

Martinec, D. A.; Baumbick, Robert; Hitt, Ellis; Leondes, Cornelius; Mayton, Monica; Schwind, Joseph; Traybar, Joseph

1992-01-01

This report provides a summary of the observations and recommendations made by a technical panel formed by the National Aeronautics and Space Administration (NASA). The panel, comprising prominent experts in the avionics field, was tasked to visit various organizations in Europe to assess the level of technology planned for use in manufactured civil avionics in the future. The primary purpose of the study was to assess avionics systems planned for implementation or already employed on civil aircraft and to evaluate future research, development, and engineering (RD&E) programs, address avionic systems and aircraft programs. The ultimate goal is to ensure that the technology addressed by NASa programs is commensurate with the needs of the aerospace industry at an international level. The panel focused on specific technologies, including guidance and control systems, advanced cockpit displays, sensors and data networks, and fly-by-wire/fly-by-light systems. However, discussions the panel had with the European organizations were not limited to these topics.

Computer programs for calculating pressure distributions including vortex effects on supersonic monoplane or cruciform wing-body-tail combinations with round or elliptical bodies

NASA Technical Reports Server (NTRS)

Dillenius, M. F. E.; Nielsen, J. N.

1979-01-01

Computer programs are presented which are capable of calculating detailed aerodynamic loadings and pressure distributions acting on pitched and rolled supersonic missile configurations which utilize bodies of circular or elliptical cross sections. The applicable range of angle of attack is up to 20 deg, and the Mach number range is 1.3 to about 2.5. Effects of body and fin vortices are included in the methods, as well as arbitrary deflections of canard or fin panels.

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel on the space shuttle program. Part 1: Observations and conclusions

NASA Technical Reports Server (NTRS)

1977-01-01

The panel reviewed the following areas of major significance for the Approach and Landing Test program: mission planning and crew training, flight-readiness of the Carrier Aircraft and the Orbiter, including its flight control and avionics system, facilities, and communications and ground support equipment. The management system for risk assessment was investigated. The Orbital Flight Test Program was also reviewed. Observations and recommendations are presented.

JTEC panel report on advanced composites in Japan

NASA Technical Reports Server (NTRS)

Diefendorf, R. J.; Grisaffe, S. J.; Hillig, W. B.; Perepezko, J. H.; Pipes, R. B.; Sheehan, J. E.

1991-01-01

The JTEC Panel on Advanced Composites visited Japan and surveyed the status and future directions of Japanese high performance ceramic and carbon fibers and their composites in metal, intermetallic, ceramic and carbon matrices. The panel's interests included not only what composite systems were chosen, but also how these systems were developed. A strong carbon and fiber industry makes Japan the leader in carbon fiber technology. Japan has initiated an oxidation resistant carbon/carbon composite program. The goals for this program are ambitious, and it is just starting, but its progress should be closely monitored in the United States.

Measurement of transmission loss characteristics using acoustic intensity techniques at the KU-FRL Acoustic Test Facility

NASA Technical Reports Server (NTRS)

Roskam, J.

1983-01-01

The transmission loss characteristics of panels using the acoustic intensity technique is presented. The theoretical formulation, installation of hardware, modifications to the test facility, and development of computer programs and test procedures are described. A listing of all the programs is also provided. The initial test results indicate that the acoustic intensity technique is easily adapted to measure transmission loss characteristics of panels. Use of this method will give average transmission loss values. The fixtures developed to position the microphones along the grid points are very useful in plotting the intensity maps of vibrating panels.

76 FR 79650 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... household-based survey designed as a continuous series of national panels. New panels are introduced every... with questions designed to address specific needs, such as obtaining information on household members... economic well-being and permitted changes in these levels to be measured over time. The 2008 panel is...

76 FR 24457 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... the SIPP, which is a household-based survey designed as a continuous series of national panels. New... the panel. The core is supplemented with questions designed to address specific needs, such as... be measured over time. The 2008 panel is currently scheduled for approximately 6 years and will...

75 FR 80790 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

..., which is a household-based survey designed as a continuous series of national panels. New panels are... DEPARTMENT OF COMMERCE U.S. Census Bureau Proposed Information Collection; Comment Request; Survey... at 4-month intervals or ``waves'' over the life of the panel. The survey is molded around a central...

75 FR 21593 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

..., which is a household-based survey designed as a continuous series of national panels. New panels are... DEPARTMENT OF COMMERCE U.S. Census Bureau Proposed Information Collection; Comment Request; Survey... interviewed at 4-month intervals or ``waves'' over the life of the panel. The survey is molded around a...

7 CFR 1940.956 - State rural economic development review panel.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true State rural economic development review panel. 1940... Rural Development Programs § 1940.956 State rural economic development review panel. (a) General. In order for a State to become or remain an eligible State, the State must have a rural economic...

NOAA Office of Exploration and Research > Home

Science.gov Websites

2014 Funding Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Review Review Panel Final Report Review Team Documents Presentations Supporting Documents Guiding the NOAA Science Advisory Board, a thirteen-member Review Panel conducted the first-ever formal

2005 Youth Sports National Report Card

ERIC Educational Resources Information Center

Strategies: A Journal for Physical and Sport Educators, 2006

2006-01-01

For the first time ever, Citizen Through Sports Alliance (CTSA) convened a panel of youth sports experts from across the country to evaluate youth sports in the United States and articulate its successes and failures. The panel evaluated only community-based youth sports programs, focusing on those that serve children ages 6 to 14. The panel is…

Documentation Panels Enhance Teacher Education Programs

ERIC Educational Resources Information Center

Warash, Bobbie Gibson

2005-01-01

Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

Development Report for the 10 KW Sound Attenuation Program (Preproduction ’F’ Kit).

DTIC Science & Technology

1981-12-02

3.2 Panel Design The panels were to be constructed from solid aluminum sheet metal on all ex- ; terior surfaces and acoustic fiberglass or mineral ... wool bill overlayed with a synthetic film and encapsulated with perforated aluminum on the interior sur- faces. Per design, the acoustic panels on the

7 CFR 1940.956 - State rural economic development review panel.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 13 2014-01-01 2013-01-01 true State rural economic development review panel. 1940... Rural Development Programs § 1940.956 State rural economic development review panel. (a) General. In order for a State to become or remain an eligible State, the State must have a rural economic...

7 CFR 1940.956 - State rural economic development review panel.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 13 2013-01-01 2013-01-01 false State rural economic development review panel. 1940... Rural Development Programs § 1940.956 State rural economic development review panel. (a) General. In order for a State to become or remain an eligible State, the State must have a rural economic...

7 CFR 1940.956 - State rural economic development review panel.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 13 2012-01-01 2012-01-01 false State rural economic development review panel. 1940... Rural Development Programs § 1940.956 State rural economic development review panel. (a) General. In order for a State to become or remain an eligible State, the State must have a rural economic...

7 CFR 1940.956 - State rural economic development review panel.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 13 2011-01-01 2009-01-01 true State rural economic development review panel. 1940... Rural Development Programs § 1940.956 State rural economic development review panel. (a) General. In order for a State to become or remain an eligible State, the State must have a rural economic...

Panel methods: An introduction

NASA Technical Reports Server (NTRS)

Erickson, Larry L.

1990-01-01

Panel methods are numerical schemes for solving (the Prandtl-Glauert equation) for linear, inviscid, irrotational flow about aircraft flying at subsonic or supersonic speeds. The tools at the panel-method user's disposal are (1) surface panels of source-doublet-vorticity distributions that can represent nearly arbitrary geometry, and (2) extremely versatile boundary condition capabilities that can frequently be used for creative modeling. Panel-method capabilities and limitations, basic concepts common to all panel-method codes, different choices that were made in the implementation of these concepts into working computer programs, and various modeling techniques involving boundary conditions, jump properties, and trailing wakes are discussed. An approach for extending the method to nonlinear transonic flow is also presented. Three appendices supplement the main test. In appendix 1, additional detail is provided on how the basic concepts are implemented into a specific computer program (PANAIR). In appendix 2, it is shown how to evaluate analytically the fundamental surface integral that arises in the expressions for influence-coefficients, and evaluate its jump property. In appendix 3, a simple example is used to illustrate the so-called finite part of the improper integrals.

A research program to reduce interior noise in general aviation airplanes. Design of an acoustic panel test facility

NASA Technical Reports Server (NTRS)

Roskam, J.; Muirhead, V. U.; Smith, H. W.; Henderson, T. D.

1977-01-01

The design, construction, and costs of a test facility for determining the sound transmission loss characteristics of various panels and panel treatments are described. The pressurization system and electronic equipment used in experimental testing are discussed as well as the reliability of the facility and the data gathered. Tests results are compared to pertinent acoustical theories for panel behavior and minor anomalies in the data are examined. A method for predicting panel behavior in the stiffness region is also presented.

The President's Panel Recommendations - Today

ERIC Educational Resources Information Center

Luckey, Robert E.; Neman, Ronald S.

1975-01-01

State mental retardation program coordinators were surveyed regarding their opinions with respect to progress in achieving the President's Panel recommendations of 1962, and the continuing relevance of these recommendations today. (Author)

Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

NASA Technical Reports Server (NTRS)

Ryan, Shannon; Christiansen, Eric; Lear, Dana

2009-01-01

Metallic foams are a relatively new class of materials with low density and novel physical, mechanical, thermal, electrical and acoustic properties. Although incompletely characterized, they offer comparable mechanical performance to traditional spacecraft structural materials (i.e. honeycomb sandwich panels) without detrimental through-thickness channeling cells. There are two competing types of metallic foams: open cell and closed cell. Open cell foams are considered the more promising technology due to their lower weight and higher degree of homogeneity. Leading micrometeoroid and orbital debris shields (MMOD) incorporate thin plates separated by a void space (i.e. Whipple shield). Inclusion of intermediate fabric layers, or multiple bumper plates have led to significant performance enhancements, yet these shields require additional non-ballistic mass for installation (fasteners, supports, etc.) that can consume up to 35% of the total shield weight [1]. Structural panels, such as open cell foam core sandwich panels, that are also capable of providing sufficient MMOD protection, represent a significant potential for increased efficiency in hypervelocity impact shielding from a systems perspective through a reduction in required non-ballistic mass. In this paper, the results of an extensive impact test program on aluminum foam core sandwich panels are reported. The effect of pore density, and core thickness on shielding performance have been evaluated over impact velocities ranging from 2.2 - 9.3 km/s at various angles. A number of additional tests on alternate sandwich panel configurations of comparable-weight have also been performed, including aluminum honeycomb sandwich panels (see Figure 1), Nomex honeycomb core sandwich panels, and 3D aluminum honeycomb sandwich panels. A total of 70 hypervelocity impact tests are reported, from which an empirical ballistic limit equation (BLE) has been derived. The BLE is in the standard form suitable for implementation in risk analysis software, and includes the effect of panel thickness, core density, and facesheet material properties. A comparison between the shielding performance of foam core sandwich panel structures and common MMOD shielding configurations is made for both conservative (additional 35% non-ballistic mass) and optimistic (additional mass equal to 30% of bumper mass) considerations. Suggestions to improve the shielding performance of foam core sandwich panels are made, including the use of outer mesh layers, intermediate fabric/composite layers, and varying pore density.

An interactive graphics program for manipulation and display of panel method geometry

NASA Technical Reports Server (NTRS)

Hall, J. F.; Neuhart, D. H.; Walkley, K. B.

1983-01-01

Modern aerodynamic panel methods that handle large, complex geometries have made evident the need to interactively manipulate, modify, and view such configurations. With this purpose in mind, the GEOM program was developed. It is a menu driven, interactive program that uses the Tektronix PLOT 10 graphics software to display geometry configurations which are characterized by an abutting set of networks. These networks are composed of quadrilateral panels which are described by the coordinates of their corners. GEOM is divided into fourteen executive controlled functions. These functions are used to build configurations, scale and rotate networks, transpose networks defining M and N lines, graphically display selected networks, join and split networks, create wake networks, produce symmetric images of networks, repanel and rename networks, display configuration cross sections, and output network geometry in two formats. A data base management system is used to facilitate data transfers in this program. A sample session illustrating various capabilities of the code is included as a guide to program operation.

75 FR 33626 - National Heart, Lung, and Blood Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... Comparative Effectiveness Research in Clinical Hypertension Management. Date: June 24, 2010. Time: 12 p.m. to... Institute Special Emphasis Panel. Ruth L. Kirschstein NRSA Institutional Research Training Grants. Date... Domestic Assistance Program Nos. 93.233, National Center for Sleep Disorders Research; 93.837, Heart and...

Experiment in multiple-criteria energy policy analysis

NASA Astrophysics Data System (ADS)

Ho, J. K.

1980-07-01

An international panel of energy analysts participated in an experiment to use HOPE (holistic preference evaluation): an interactive parametric linear programming method for multiple criteria optimization. The criteria of cost, environmental effect, crude oil, and nuclear fuel were considered, according to BESOM: an energy model for the US in the year 2000.

NTP-CERHR Expert Panel Report on the Reproductive and Developmental Toxicity of Bisphenol A

EPA Science Inventory

The National Toxicology Program (NTP)1 established the NTP Center for the Evaluation of Risks to Human Reproduction (CERHR) in June 1998. The purpose of the CERHR is to provide timely, unbiased, scientifically sound evaluations of the potential for adverse effects on reproduction...

Swimming with Sharks: A Physical Educator's Guide to Effective Crowdsourcing

ERIC Educational Resources Information Center

Bulger, Sean M.; Jones, Emily M.; Katz, Nicole; Shrewsbury, Gentry; Wood, Justin

2016-01-01

The reality-competition television series Shark Tank affords up-and-coming entrepreneurs the opportunity to make a formal business presentation to a panel of potential investors. Adopting a similar framework, entrepreneurial teachers have started using web-based collaborative fundraising or crowdsourcing as a tool to build program capacity with…

78 FR 27410 - National Institute of Environmental Health Sciences; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Environmental Health Sciences; Notice of Closed Meeting Pursuant to section 10(d) of the Federal Advisory... Health Sciences Special Emphasis Panel Screens for Toxicant Effects on Cell Differentiation. Date: June 6..., Nat. Institute of Environmental Health Sciences, Office of Program Operations, Scientific Review...

Considerations in Use of the EPA’s ToxCast Data for Environmental Toxicology (SETAC)

EPA Science Inventory

The US EPA has developed the ToxCast program to prioritize chemicals for selective toxicity testing. ToxCast relies on extensive bioactivity profiling using a panel of biochemical and cellular assays that measure chemicals effects on potential molecular initiating events and key ...

Panel A report: Standards needed to interconnect ADS pilots for data sharing for catalogues, directories, and dictionaries

NASA Technical Reports Server (NTRS)

1981-01-01

User requirements, guidelines, and standards for interconnecting an Applications Data Service (ADS) program for data sharing are discussed. Methods for effective sharing of information (catalogues, directories, and dictionaries) among member installations are addressed. An ADS Directory/Catalog architectural model is also given.

Calculation of compressible flow in and about three-dimensional inlets with and without auxiliary inlets by a higher-order panel method

NASA Technical Reports Server (NTRS)

Hess, J. L.; Friedman, D. M.

1982-01-01

A three dimensional higher order panel method was specialized to the case of inlets with auxiliary inlets. The resulting program has a number of graphical input-output features to make it highly useful to the designer. The various aspects of the program are described instructions for its use are presented.

Composite panels based on woven sandwich-fabric preforms

NASA Astrophysics Data System (ADS)

van Vuure, Aart Willem

A new type of sandwich material was investigated, based on woven sandwich-fabric preforms. Because of the integrally woven nature of the sandwich-fabric the skin-core debonding resistance of panels and structures based on the preform is very high. As the sandwich-fabrics are produced by a large scale textile weaving process (velvet weaving or distance weaving) and already a preform of a sandwich is available, the cost of the final panel or structure can potentially stay limited. Most attention in this work is focussed on the mechanical performance of sandwich-fabric panels. The high skin-core debonding resistance was verified and also indications were found of a good damage tolerance. Both unfoamed and foamed panels were evaluated and compared with existing sandwich panels. Microstructural parameters investigated for unfoamed cores are pile length, pile density, woven pile angles, degree of pile stretching, tilt angles of the piles induced during panel production and resin content and distribution. For foamed panels it is especially the foam density which has an important influence. There appears to be a synergistic effect between piles and foam in the sandwich core, leading to very acceptable mechanical properties. For panels for (semi) structural applications, foaming is almost indispensable once the panel thickness is higher than about 15 mm. To understand the behaviour of foamed panels, attention was paid to the modelling of the mechanics of pure foam. The foam microstructure was modelled with the model of an anisotropic tetrakaidecahedron. The mechanical properties of unfoamed panels were modelled with the help of finite elements. A detailed geometrical description of the core layout was made which was incorporated into a preprocessing program for a finite element code. Attention is paid to the production of panels based on the woven preforms. A newly developed Adhesive Foil Stretching process was investigated. Also the foaming of panels was studied. A lot of attention was paid to a special application in the field of structural damping, where sandwich-fabric panels could be used as spacer in a constrained layer application. The vibrations and damping were modelled with the help of finite elements.

TWRS vadose zone contamination issue expert panel report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shafer, D.S.

1997-05-01

When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of themore » non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self-imposed. The institutional problems they encountered include having both Tank Waste Remediation System (TWRS), the parent organization of the Vadose Zone Characterization Program and Environmental Restoration (ER), each under different regulatory controls and different organizational units, seeking to defend the status quo and discount many of the Panel`s conclusions and recommendations. The results presented in the SX Tank Farm Report, especially the visualizations, have created concern in the public sector, both on a local, personal level and on a national political level.« less

Computer prediction of three-dimensional potential flow fields in which aircraft propellers operate. M.S. Thesis

NASA Technical Reports Server (NTRS)

Jumper, S. J.

1982-01-01

A computer program was developed to calculate the three dimensional, steady, incompressible, inviscid, irrotational flow field at the propeller plane (propeller removed) located upstream of an arbitrary airframe geometry. The program uses a horseshoe vortex of known strength to model the wing. All other airframe surfaces are modeled by a network source panels of unknown strength which is exposed to a uniform free stream and the wing-induced velocity field. By satisfying boundary conditions on each panel (the Neumann problem), relaxed boundary conditions being used on certain panels to simulate inlet inflow, the source strengths are determined. From the known source and wing vortex strengths, the resulting velocity fields on the airframe surface and at the propeller plane are obtained. All program equations are derived in detail, and a brief description of the program structure is presented. A user's manual which fully documents the program is cited. Computer predictions of the flow on the surface of a sphere and at a propeller plane upstream of the sphere are compared with the exact mathematical solutions. Agreement is good, and correct program operation is verified.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 3; 8-ply Out-of-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Myers, David E.; Kosareo, Daniel N.; Kellas, Sotiris

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10 m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800B/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of the 3- by 5-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, T40-800B/5320-1 facesheets (referred to as Panel C). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear, two-dimensional (2-D) and three-dimensional (3-D), models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength.

Using Panel Vendors for Recruitment Into a Web-Based Family Prevention Program: Methodological Considerations.

PubMed

Wang-Schweig, Meme; Miller, Brenda A; Buller, David B; Byrnes, Hilary F; Bourdeau, Beth; Rogers, Veronica

2017-01-01

Use of online panel vendors in research has grown over the past decade. Panel vendors are organizations that recruit participants into a panel to take part in web-based surveys and match panelists to a target audience for data collection. We used two panel vendors to recruit families ( N = 411) with a 16- to 17-year-old teen to participate in a randomized control trial (RCT) of an online family-based program to prevent underage drinking and risky sexual behaviors. Our article addresses the following research questions: (1) How well do panel vendors provide a sample of families who meet our inclusion criteria to participate in a RCT? (2) How well do panel vendors provide a sample of families who reflect the characteristics of the general population? and (3) Does the choice of vendor influence the characteristics of families that we engage in research? Despite the screening techniques used by the panel vendors to identify families who met our inclusion criteria, 23.8% were found ineligible when research staff verified their eligibility by direct telephone contact. Compared to the general U.S. population, our sample had more Whites and more families with higher education levels. Finally, across the two panel vendors, there were no significant differences in the characteristics of families, except for mean age. The online environment provides opportunities for new methods to recruit participants in research studies. However, innovative recruitment methods need careful study to ensure the quality of their samples.

Infrared Multispectral Sensor Program, Phase 2. Field Measurements, Analysis and Modeling. Volume 1. Fourier Transform Spectrometer Sensor Characterization.

DTIC Science & Technology

1994-05-01

TskY=250K) ... 5-27 6-1. Treeline Correlation With 10.1 Microns ...................... 6-2 6-2. Mean Contrast: CARC Panel vs. Treeline ...6-3 6-3. CARC Panel and Treeline .............................. 6-5 6-4. Signal-to-Clutter Ratio for CARC Panel vs. Treeline ............. 6-6 6...5. Low Emissivity Panel and Treeline ......................... 6-7 xii TABLES 4-1: Sensor Characterization Test Summary ....................... 4-2 4

Prediction and verification of creep behavior in metallic materials and components for the space shuttle thermal protection system

NASA Technical Reports Server (NTRS)

Davis, J. W.; Cramer, B. A.

1976-01-01

A method of analysis was developed for predicting permanent cyclic creep deflections in stiffened panel structures. This method uses creep equations based on cyclic tensile creep tests and a computer program to predict panel deflections as a function of mission cycle. Four materials were investigated - a titanium alloy (Ti-6Al-4V), a cobalt alloy (L605), and two nickel alloys (Rene'41 and TDNiCr). Steady-state and cyclic creep response data were obtained by testing tensile specimens fabricated from thin gage sheet (0.025 and 0.63 cm nominal). Steady-state and cyclic creep equations were developed which describe creep as a function of time, temperature and load. Tests were also performed on subsize (6.35 x 30.5 cm) rib and corrugation stiffened panels. These tests were used to correlate creep responses between elemental specimens and panels. The panel response was analyzed by use of a specially written computer program.

Proceedings of the Fifteenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1990-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by GSFC and created for the purpose of investigating the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effect of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. Fifteen papers were presented at the Fifteenth Annual Software Engineering Workshop in five sessions: (1) SEL at age fifteen; (2) process improvement; (3) measurement; (4) reuse; and (5) process assessment. The sessions were followed by two panel discussions: (1) experiences in implementing an effective measurement program; and (2) software engineering in the 1980's. A summary of the presentations and panel discussions is given.

Implementation of Maximum Power Point Tracking (MPPT) Solar Charge Controller using Arduino

NASA Astrophysics Data System (ADS)

Abdelilah, B.; Mouna, A.; KouiderM’Sirdi, N.; El Hossain, A.

2018-05-01

the platform Arduino with a number of sensors standard can be used as components of an electronic system for acquiring measures and controls. This paper presents the design of a low-cost and effective solar charge controller. This system includes several elements such as the solar panel converter DC/DC, battery, circuit MPPT using Microcontroller, sensors, and the MPPT algorithm. The MPPT (Maximum Power Point Tracker) algorithm has been implemented using an Arduino Nano with the preferred program. The voltage and current of the Panel are taken where the program implemented will work and using this algorithm that MPP will be reached. This paper provides details on the solar charge control device at the maximum power point. The results include the change of the duty cycle with the change in load and thus mean the variation of the buck converter output voltage and current controlled by the MPPT algorithm.

Sonic fatigue testing of an advanced composite aileron

NASA Technical Reports Server (NTRS)

Soovere, J.

1982-01-01

The sonic fatigue test program to verify the design of the composite inboard aileron for the L-1011 airplane is described. The composite aileron is fabricated from graphite/epoxy minisandwich covers which are attached to graphite/epoxy front spar and ribs, and to an aluminum rear spar with fasteners. The program covers the development of random fatigue data by means of coupon testing and modal studies on a representative section of the composite aileron, culminating in the accelerated sonic fatigue proof test. The composite aileron sustained nonlinear panel vibration during the proof test without failure. Viscous damping coefficients as low as 0.4% were measured on the panels. The effects of moisture conditioning and elevated temperature on the random fatigue life of both undamaged and impact damaged coupons were investigated. The combination of impact damage, moisture, and a 180 F temperature could reduce the random fatigue life by 50%.

Using a Fuzzy Light Sensor to Improve the Efficiency of Solar Panels

NASA Astrophysics Data System (ADS)

Suryono; Suseno, Jatmiko Endro; Sulistiati, Ainie Khuriati Riza; Prahara, Tahan

2018-02-01

Solar panel efficiency can be increased by improving the quality of photovoltaic material, the effectiveness of electronic circuit, and the light source tracking model. This research is aimed at improving the quality of solar panels by tracking light source using a fuzzy logic sensor. A fuzzy light sensor property is obtained from two LDR (light dependent resistor) light sensors installed in parallel to each other and is given a light separator in between them. Both sensors are mounted on a solar panel. Sensor output is acquired using a 12 bit ADC from an ATSAM3XE microcontroller and is then sent to a computer using WIFI radio. A PID (Proportional-Integral-Derivative) control algorithm is used to manage the position of the solar panel in line with the input given by the fuzzy light sensor. This control mechanism works based on the margin of fuzzy membership from both sensors that is used to move a motor DC that in turn moves the solar panel. Experimental results show a characteristically symmetrical fuzzy membership of both sensors with a reflected correlation of R=0.9981 after gains from both sensors are arranged with a program. Upon being tested in the field, this system was capable of improving the performance of solar panels in gaining power compared to their original fixed position. The discrepancy was evident when the angle of incoming sunlight approached both 0° and 180°. Further calculations of data acquired by the fuzzy light sensor show increased solar panel power efficiency by up to 5.6%.

Probabilistic Structural Evaluation of Uncertainties in Radiator Sandwich Panel Design

NASA Technical Reports Server (NTRS)

Kuguoglu, Latife; Ludwiczak, Damian

2006-01-01

The Jupiter Icy Moons Orbiter (JIMO) Space System is part of the NASA's Prometheus Program. As part of the JIMO engineering team at NASA Glenn Research Center, the structural design of the JIMO Heat Rejection Subsystem (HRS) is evaluated. An initial goal of this study was to perform sensitivity analyses to determine the relative importance of the input variables on the structural responses of the radiator panel. The desire was to let the sensitivity analysis information identify the important parameters. The probabilistic analysis methods illustrated here support this objective. The probabilistic structural performance evaluation of a HRS radiator sandwich panel was performed. The radiator panel structural performance was assessed in the presence of uncertainties in the loading, fabrication process variables, and material properties. The stress and displacement contours of the deterministic structural analysis at mean probability was performed and results presented. It is followed by a probabilistic evaluation to determine the effect of the primitive variables on the radiator panel structural performance. Based on uncertainties in material properties, structural geometry and loading, the results of the displacement and stress analysis are used as an input file for the probabilistic analysis of the panel. The sensitivity of the structural responses, such as maximum displacement and maximum tensile and compressive stresses of the facesheet in x and y directions and maximum VonMises stresses of the tube, to the loading and design variables is determined under the boundary condition where all edges of the radiator panel are pinned. Based on this study, design critical material and geometric parameters of the considered sandwich panel are identified.

Application of compound parabolic concentrators to solar photovoltaic conversion. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, R.L.; Gorski, A.J.; Graven, R.M.

1977-02-01

The final results of an analytical and experimental study of the application of nonimaging concentrators to solar photovoltaic conversion are presented. Two versions of the Compound Parabolic Concentrator (CPC) were considered, the Dielectric Compound Parabolic Concentrator (DCPC) in which the concentrator is filled with a dielectric material that satisfies requirements for Total Internal Reflection (TIR), and a conventional CPC in which metallic reflection is used for the mirror surfaces. Two working prototype panels were constructed and tested during the course of the program. The first was a 1.22 m by 1.22 m DCPC panel that requires only ten adjustments/year, hasmore » a panel utilization factor (packing factor) of 96%, and delivered the equivalent of 138 W (peak) under 1 kW/m/sup 2/ direct insolation. The net energy conversion efficiency was 10.3% over the entire panel area. The second panel was a conventional CPC panel measuring 1.22 m by 1.22 m. This panel requires thirty-six adjustments per year, and delivers the equivalent of 97 W when under 1 kW/m/sup 2/ direct insolation. The results of a cost-effectiveness analysis of the concept of using nonimaging concentrators for photovoltaic conversion are also presented. The concentrator panels showed a decided savings in comparison to the cost of flat plate photovoltaic panels, both at present-day silicon costs ($2000/m/sup 2/) and projected lower silicon costs ($200/m/sup 2/). At a silicon cost of $200/m/sup 2/, a two-dimensional (cone) version of the collector has the potential for achieving from $0.60-2.00 per average watt (about $0.15-0.50 per peak watt) while requiring only crude (+-4.5/sup 0/) tracking.« less

PAN AIR summary document (version 1.0)

NASA Technical Reports Server (NTRS)

Derbyshire, T.; Sidwell, K. W.

1982-01-01

The capabilities and limitations of the panel aerodynamics (PAN AIR) computer program system are summarized. This program uses a higher order panel method to solve boundary value problems involving the Prandtl-Glauert equation for subsonic and supersonic potential flows. Both aerodynamic and hydrodynamic problems can be solved using this modular software which is written for the CDC 6600 and 7600, and the CYBER 170 series computers.

Accounting for Training: An Analysis of the Outcomes of California Employment Training Panel Programs.

ERIC Educational Resources Information Center

Moore, Richard W.; And Others

The California Employment Training Panel (ETP), which was designed as a performance-driven training program, pays agencies for training provided only if the trainee is placed and retained in a related job for 90 days. The labor market experience of ETP trainees was tracked from 1989-90, 1990-91, and 1991-92 to measure the impact of ETP training on…

Do photovoltaics have a future

NASA Technical Reports Server (NTRS)

Williams, B. F.

1979-01-01

There is major concern as to the economic practicality of widespread terrestrial use because of the high cost of the photovoltaic arrays themselves. Based on their high efficiency, photovoltaic collectors should be one of the cheapest forms of energy generators known. Present photovoltaic panels are violating the trend of lower costs with increasing efficiency due to their reliance on expensive materials. A medium technology solution should provide electricity competitive with the existing medium to high technology energy generators such as oil, coal, gas, and nuclear fission thermal plants. Programs to reduce the cost of silicon and develop reliable thin film materials have a realistic chance of producing cost effective photovoltaic panels.

Review of the USA National Phenology Network

USGS Publications Warehouse

Glynn, Pierre D.; Owen, Timothy W.

2015-08-24

The panel recommends that the USA–NPN National Coordinating Office (NCO) establish an implementation plan that addresses all of the panel recommendations, with priorities, timelines, and assumptions to move the program forward successfully.

75 FR 39548 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

...: Center for Scientific Review Special Emphasis Panel; Program Project: NeuroAIDS. Date: August 4-5, 2010... Committee: Center for Scientific Review Special Emphasis Panel; Member Conflict: AIDS Molecular Biology and...

77 FR 35413 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

... Panel; Program Project: Mechanisms of Drug Disposition During Pregnancy. Date: July 9, 2012. Time: 12:00... of Committee: Center for Scientific Review Special Emphasis Panel; Member Conflict: Nutrition and...

The development of composite materials for spacecraft precision reflector panels

NASA Technical Reports Server (NTRS)

Tompkins, Stephen S.; Bowles, David E.; Funk, Joan G.; Towell, Timothy W.; Lavoie, J. A.

1990-01-01

One of the critical technology needs for large precision reflectors required for future astrophysics and optical communications is in the area of structural materials. Therefore, a major area of the Precision Segmented Reflector Program at NASA is to develop lightweight composite reflector panels with durable, space environmentally stable materials which maintain both surface figure and required surface accuracy necessary for space telescope applications. Results from the materials research and development program at NASA Langley Research Center are discussed. Advanced materials that meet the reflector panel requirements are identified. Thermal, mechanical and durability properties of candidate materials after exposure to simulated space environments are compared to the baseline material.

The Space Station Photovoltaic Panels Plasma Interaction Test Program: Test plan and results

NASA Technical Reports Server (NTRS)

Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

1989-01-01

The Plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

The Space Station photovoltaic panels plasma interaction test program - Test plan and results

NASA Technical Reports Server (NTRS)

Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

1990-01-01

The plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

Behavior of sandwich panels subjected to bending fatigue, axial compression loading and in-plane bending

NASA Astrophysics Data System (ADS)

Mathieson, Haley Aaron

This thesis investigates experimentally and analytically the structural performance of sandwich panels composed of glass fibre reinforced polymer (GFRP) skins and a soft polyurethane foam core, with or without thin GFRP ribs connecting skins. The study includes three main components: (a) out-of-plane bending fatigue, (b) axial compression loading, and (c) in-plane bending of sandwich beams. Fatigue studies included 28 specimens and looked into establishing service life (S-N) curves of sandwich panels without ribs, governed by soft core shear failure and also ribbed panels governed by failure at the rib-skin junction. Additionally, the study compared fatigue life curves of sandwich panels loaded under fully reversed bending conditions (R=-1) with panels cyclically loaded in one direction only (R=0) and established the stiffness degradation characteristics throughout their fatigue life. Mathematical models expressing fatigue life and stiffness degradation curves were calibrated and expanded forms for various loading ratios were developed. Approximate fatigue thresholds of 37% and 23% were determined for non-ribbed panels loaded at R=0 and -1, respectively. Digital imaging techniques showed significant shear contribution significantly (90%) to deflections if no ribs used. Axial loading work included 51 specimens and examined the behavior of panels of various lengths (slenderness ratios), skin thicknesses, and also panels of similar length with various rib configurations. Observed failure modes governing were global buckling, skin wrinkling or skin crushing. In-plane bending involved testing 18 sandwich beams of various shear span-to-depth ratios and skin thicknesses, which failed by skin wrinkling at the compression side. The analytical modeling components of axially loaded panels include; a simple design-oriented analytical failure model and a robust non-linear model capable of predicting the full load-displacement response of axially loaded slender sandwich panels, accounting for P-Delta effects, inherent out-of-straightness profile of any shape at initial conditions, and the excessive shear deformation of soft core and its effect on buckling capacity. Another model was developed to predict the load-deflection response and failure modes of in-plane loaded sandwich beams. After successful verification of the models using experimental results, comprehensive parametric studies were carried out using these models to cover parameters beyond the limitations of the experimental program.

International Expert Panel Consensus Guidelines for Structure and Delivery of Qigong Exercise for Cancer Care Programming

PubMed Central

Klein, Penelope; Picard, George; Schneider, Roger; Oh, Byeongsang

2017-01-01

Integrative oncology, including Qigong, is a relatively new concept in modern healthcare. Evidence of benefits of Qigong in cancer survivors is emerging. As such, several cancer centers, world-wide, have introduced Qigong as part of integrative medicine within supportive cancer care programming. Qigong exercise programming content and quality varies among institutions due to lack of standard guidelines and, at present, relies solely on the instructor’s skills, knowledge, personal preferences and clinical experience. Development of consensus guidelines recommending the basic structure and delivery of Qigong programming in cancer care can potentiate quality assurance and reduce risk of harm. This applied qualitative research utilized a modified Delphi approach to formulate consensus guidelines. Guidelines were developed through discussions among an international expert panel (N = 13) with representation from Australia, Canada, Ireland, and the United States. Panel communication was predominantly conducted by email and occurred from November 2016 through February 2017. Expert panel work resulted in the generation of a work product: Qigong in Cancer Care Guidelines: A Working Paper including: (a) Consensus Guidelines for structure and delivery of Qigong exercise for Cancer care programming; (b) Consensus guidelines for instructor competence for teaching Qigong exercise for cancer care classes; (c) Screening tool for safe participation in Qigong exercise; (d) Class participant instructions for maintaining safety during Qigong exercise; and (e) Advice from the field. Generation of these resources is the first step in establishing recommendations for ‘best practice’ in the area of Qigong for cancer care programming.

Numerical modeling analysis of stress transfer modification concepts for deep longwall mines. Report of investigations/1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandergrift, T.L.; Jude, C.V.

1995-12-31

This U.S. Bureau of Mines (USBM) report evaluates three stress-transfer-modification concepts for their potential in reducing longwall gate road stresses and closures. In each of the three concepts--packwalling, gob infilling, and entry filling--support structures are constructed on the headgate side of the panel parallel with or inby the face line. When the headgate becomes the tailgate of the adjacent panel, these structures are in place to accept stresses transferred from the mined-out panel. Using the USBM nonlinear boundary-element program MULSIM/NL, baseline models of typical longwall stress transfer behavior were developed for both intermediate depth and deep mining conditions. These modelsmore » were verified by comparing model results with field measurements and observations. The stress-transfer-modification concepts were then incorporated into the deep baseline model to quantify the effects of each concept on tailgate closure.« less

Stresses in acoustically excited panels and shuttle insulation tiles

NASA Technical Reports Server (NTRS)

Otalvo, I. U.

1976-01-01

Natural vibration and acoustic response results are presented for a 36 x 18 inch panel with 18 6 x 6-inch tiles of 1.0, 1.6 and 2.3 inch thicknesses. Computed results for an untiled panel are compared with experiments performed earlier. Natural frequency and acoustic response comparisons are also given for independent analyses performed upon tiled and untiled panels. The results indicate the general applicability of the computer programs developed for use as shuttle design and analysis tools.

Impact of expanded newborn screening--United States, 2006.

PubMed

2008-09-19

Universal newborn screening for selected metabolic, endocrine, hematologic, and functional disorders is a well-established practice of state public health programs. Recent developments in tandem mass spectrometry (MS/MS), which is now capable of multi-analyte analysis in a high throughput capacity, has enabled newborn screening to include many more disorders detectable from a newborn blood spot. In 2006, to address the substantial variation that existed from state to state in the number of disorders included in newborn screening panels, the American College of Medical Genetics (ACMG), under guidance from the Health Resources and Services Administration, recommended a uniform panel of 29 disorders, which was subsequently endorsed by the federal Advisory Committee on Heritable Disorders in Newborns and Children. After 2006, most states began to expand their panels to include all 29 disorders; currently, 21 states and the District of Columbia have fully implemented the ACMG panel. To estimate the burden to state newborn screening programs resulting from this expansion, CDC used 2001-2006 data from those states with well-established MS/MS screening programs to estimate the number of children in the United States who would have been identified with disorders in 2006 if all 50 states and the District of Columbia had been using the ACMG panel. This report describes the results of that analysis, which indicated that, although such an expansion would have increased the number of children identified by only 32% (from 4,370 to 6,439), these children would have had many rare disorders that require local or regional capacity to deliver expertise in screening, diagnosis, and management. The findings underscore the need for public health and health-care delivery systems to build or expand the programs required to manage the rare disorders detected through expanded newborn screening, while also continuing programs to address more common disorders.

The Ottawa panel clinical practice guidelines for the management of knee osteoarthritis. Part one: introduction, and mind-body exercise programs.

PubMed

Brosseau, Lucie; Taki, Jade; Desjardins, Brigit; Thevenot, Odette; Fransen, Marlene; Wells, George A; Imoto, Aline Mizusaki; Toupin-April, Karine; Westby, Marie; Gallardo, Inmaculada C Álvarez; Gifford, Wendy; Laferrière, Lucie; Rahman, Prinon; Loew, Laurianne; Angelis, Gino De; Cavallo, Sabrina; Shallwani, Shirin Mehdi; Aburub, Ala'; Bennell, Kim L; Van der Esch, Martin; Simic, Milena; McConnell, Sara; Harmer, Alison; Kenny, Glen P; Paterson, Gail; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; McLean, Linda

2017-05-01

To identify effective mind-body exercise programs and provide clinicians and patients with updated, high-quality recommendations concerning non-traditional land-based exercises for knee osteoarthritis. A systematic search and adapted selection criteria included comparative controlled trials with mind-body exercise programs for patients with knee osteoarthritis. A panel of experts reached consensus on the recommendations using a Delphi survey. A hierarchical alphabetical grading system (A, B, C+, C, D, D+, D-) was used, based on statistical significance ( P < 0.5) and clinical importance (⩾15% improvement). The four high-quality studies identified demonstrated that various mind-body exercise programs are promising for improving the management of knee osteoarthritis. Hatha Yoga demonstrated significant improvement for pain relief (Grade B) and physical function (Grade C+). Tai Chi Qigong demonstrated significant improvement for quality of life (Grade B), pain relief (Grade C+) and physical function (Grade C+). Sun style Tai Chi gave significant improvement for pain relief (Grade B) and physical function (Grade B). Mind-body exercises are promising approaches to reduce pain, as well as to improve physical function and quality of life for individuals with knee osteoarthritis.

An improved panel method for the solution of three-dimensional leading-edge vortex flows. Volume 1: Theory document

NASA Technical Reports Server (NTRS)

Johnson, F. T.; Lu, P.; Tinoco, E. N.

1980-01-01

An improved panel method for the solution of three dimensional flow and wing and wing-body combinations with leading edge vortex separation is presented. The method employs a three dimensional inviscid flow model in which the configuration, the rolled-up vortex sheets, and the wake are represented by quadratic doublet distributions. The strength of the singularity distribution as well as shape and position of the vortex spirals are computed in an iterative fashion starting with an assumed initial sheet geometry. The method calculates forces and moments as well as detail surface pressure distributions. Improvements include the implementation of improved panel numerics for the purpose of elimination the highly nonlinear effects of ring vortices around double panel edges, and the development of a least squares procedure for damping vortex sheet geometry update instabilities. A complete description of the method is included. A variety of cases generated by the computer program implementing the method are presented which verify the mathematical assumptions of the method and which compare computed results with experimental data to verify the underlying physical assumptions made by the method.

Evaluating economic and environmental aspects of using solar panels on multi-angled facades of office buildings

NASA Astrophysics Data System (ADS)

Hannoudi, Loay Akram; Lauring, Michael; Christensen, Jørgen Erik

2017-09-01

This paper is concerned with using solar panels as high-tech cladding materials on multi-angled facades for office buildings. The energy produced by the solar panels will be consumed inside the office rooms by cooling compressors, ventilation, lighting and office equipment. Each multi-angled facade unit is directed into two different orientations on a vertical axis (right and left), but not tilted up and down. The different facade orientations will optimize the use of solar radiation to produce the needed energy from the solar panels when placing them on the parapets of these facades. In this regard, four scenarios with different facade configurations and orientations are evaluated and discussed. The method for the simulations and calculations depends on two main programs: first, IDA ICE program to calculate the energy consumption and evaluate the indoor climate of the building; and second, PVBAT to calculate the cost of the electricity produced by the solar panels and evaluate the total amount of energy produced from these panels along with the ratio to the energy bought directly from the electricity grid. There is also an environmental evaluation for the system by calculating the CO2 emissions in the different scenarios.

75 FR 35820 - National Institute of Biomedical Imaging and Bioengineering; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... Imaging and Bioengineering Special Emphasis Panel Decision Support Systems and Comparative Effectiveness Research (ARRA). Date: July 23, 2010. Time: 12 p.m. to 5 p.m. Agenda: To review and evaluate grant... Assistance Program Nos. 93.701, ARRA Related Biomedical Research and Research Support Awards, National...

Issues in Putting Outcome-Based Education into Practice at the District Level: A Panel Discussion.

ERIC Educational Resources Information Center

Norton, Deborah

This conference presentation describes the AUEN (Addressing Unique Education Needs) system of assessing educational outcomes which is used by the Rochester (Michigan) Community Schools to help establish accountable and effective special education support programs and services. The AUEN provides an innovative and practical approach to assessment,…

Training Research Program and Plans: Advanced Simulation in Undergraduate Pilot Training.

ERIC Educational Resources Information Center

Matheny, W. G.

The study reports the work done by a panel of experts in training research toward defining priority research investigations to be undertaken through the Human Resources Laboratory, Flying Training Division (HRL/FT). A list of recommended investigations judged to be important for increasing the effectiveness of beginning pilot training was…

Human Capital Augmentation versus the Signaling Value of MBA Education

ERIC Educational Resources Information Center

Hussey, Andrew

2012-01-01

Panel data on MBA graduates is used in an attempt to empirically distinguish between human capital and signaling models of education. The existence of employment observations prior to MBA enrollment allows for the control of unobserved ability or selection into MBA programs (through the use of individual fixed effects). In addition, variation in…

Projection display technology for avionics applications

NASA Astrophysics Data System (ADS)

Kalmanash, Michael H.; Tompkins, Richard D.

2000-08-01

Avionics displays often require custom image sources tailored to demanding program needs. Flat panel devices are attractive for cockpit installations, however recent history has shown that it is not possible to sustain a business manufacturing custom flat panels in small volume specialty runs. As the number of suppliers willing to undertake this effort shrinks, avionics programs unable to utilize commercial-off-the-shelf (COTS) flat panels are placed in serious jeopardy. Rear projection technology offers a new paradigm, enabling compact systems to be tailored to specific platform needs while using a complement of COTS components. Projection displays enable improved performance, lower cost and shorter development cycles based on inter-program commonality and the wide use of commercial components. This paper reviews the promise and challenges of projection technology and provides an overview of Kaiser Electronics' efforts in developing advanced avionics displays using this approach.

Updated Panel-Method Computer Program

NASA Technical Reports Server (NTRS)

Ashby, Dale L.

1995-01-01

Panel code PMARC_12 (Panel Method Ames Research Center, version 12) computes potential-flow fields around complex three-dimensional bodies such as complete aircraft models. Contains several advanced features, including internal mathematical modeling of flow, time-stepping wake model for simulating either steady or unsteady motions, capability for Trefftz computation of drag induced by plane, and capability for computation of off-body and on-body streamlines, and capability of computation of boundary-layer parameters by use of two-dimensional integral boundary-layer method along surface streamlines. Investigators interested in visual representations of phenomena, may want to consider obtaining program GVS (ARC-13361), General visualization System. GVS is Silicon Graphics IRIS program created to support scientific-visualization needs of PMARC_12. GVS available separately from COSMIC. PMARC_12 written in standard FORTRAN 77, with exception of NAMELIST extension used for input.

78 FR 56903 - Office of the Director, National Institutes of Health; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-16

... Emphasis Panel; Comparative Medicine Resource Applications. Date: October 9-10, 2013. Time: 8:00 a.m. to 5... of Research Infrastructure Programs Special Emphasis Panel; Comparative Medicine Training...

Linear Strength Vortex Panel Method for NACA 4412 Airfoil

NASA Astrophysics Data System (ADS)

Liu, Han

2018-03-01

The objective of this article is to formulate numerical models for two-dimensional potential flow over the NACA 4412 Airfoil using linear vortex panel methods. By satisfying the no penetration boundary condition and Kutta condition, the circulation density on each boundary points (end point of every panel) are obtained and according to which, surface pressure distribution and lift coefficients of the airfoil are predicted and validated by Xfoil, an interactive program for the design and analysis of airfoil. The sensitivity of results to the number of panels is also investigated in the end, which shows that the results are sensitive to the number of panels when panel number ranges from 10 to 160. With the increasing panel number (N>160), the results become relatively insensitive to it.

Air Force Personalized Medicine Program Panel: Representative Research at the 59th Medical Wing San Antonio Military Medical Center

DTIC Science & Technology

2016-05-18

and treatment strategies at the San Antonio Military Health System. Panel members will describe studies in Disease Management providing evidence for...Application in a Clinical CBA: AFMSand MAJCOM Needs (Research Knowledge) Setti g Optimization of Pharmacologic Cardiovascular Personalized Care...Medicine Research Program Development of Human Mesenchymal Stem Cells for Treatment of Immune System Dysregulation in Neurological & other Diseases

Autism Program Quality Indicators: A Self-Review and Quality Improvement Guide for Programs Serving Young Students with Autism Spectrum Disorders, Fall 2004

ERIC Educational Resources Information Center

Librera, William, L.; Bryant, Isaac; Gantwerk, Barbara; Tkach, Barbara

2004-01-01

This document is the direct result of a panel of nearly three dozen autism experts in New Jersey from the fields of education, medicine and psychology. The panel reviewed research findings and best practice models with a major emphasis on the conclusions and recommendations of the National Research Council and on documents from other states,…

Prospecting sugarcane resistance to Sugarcane yellow leaf virus by genome-wide association.

PubMed

Debibakas, S; Rocher, S; Garsmeur, O; Toubi, L; Roques, D; D'Hont, A; Hoarau, J-Y; Daugrois, J H

2014-08-01

Using GWAS approaches, we detected independent resistant markers in sugarcane towards a vectored virus disease. Based on comparative genomics, several candidate genes potentially involved in virus/aphid/plant interactions were pinpointed. Yellow leaf of sugarcane is an emerging viral disease whose causal agent is a Polerovirus, the Sugarcane yellow leaf virus (SCYLV) transmitted by aphids. To identify quantitative trait loci controlling resistance to yellow leaf which are of direct relevance for breeding, we undertook a genome-wide association study (GWAS) on a sugarcane cultivar panel (n = 189) representative of current breeding germplasm. This panel was fingerprinted with 3,949 polymorphic markers (DArT and AFLP). The panel was phenotyped for SCYLV infection in leaves and stalks in two trials for two crop cycles, under natural disease pressure prevalent in Guadeloupe. Mixed linear models including co-factors representing population structure fixed effects and pairwise kinship random effects provided an efficient control of the risk of inflated type-I error at a genome-wide level. Six independent markers were significantly detected in association with SCYLV resistance phenotype. These markers explained individually between 9 and 14 % of the disease variation of the cultivar panel. Their frequency in the panel was relatively low (8-20 %). Among them, two markers were detected repeatedly across the GWAS exercises based on the different disease resistance parameters. These two markers could be blasted on Sorghum bicolor genome and candidate genes potentially involved in plant-aphid or plant-virus interactions were localized in the vicinity of sorghum homologs of sugarcane markers. Our results illustrate the potential of GWAS approaches to prospect among sugarcane germplasm for accessions likely bearing resistance alleles of significant effect useful in breeding programs.

Space and surface power for the space exploration initiative: Results from project outreach

NASA Technical Reports Server (NTRS)

Shipbaugh, C.; Solomon, K.; Gonzales, D.; Juncosa, M.; Bauer, T.; Salter, R.

1991-01-01

The analysis and evaluations of the Space and Surface Power panel, one of eight panels created by RAND to screen and analyze submissions to the Space Exploration Initiative (SEI) Outreach Program, is documented. In addition to managing and evaluating the responses, or submissions, to this public outreach program, RAND conducted its own analysis and evaluation relevent to SEI mission concepts, systems, and technologies. The Power panel screened and analyzed submissions for which a substantial portion of the concepts involved power generation sources, transmission, distribution, thermal management, and handling of power (including conditioning, conversion, packaging, and enhancements in system components). A background discussion of the areas the Power panel covered and the issues the reviewers considered pertinent to the analysis of power submissions are presented. An overview of each of the highest-ranked submissions and then a discussion of these submissions is presented. The results of the analysis is presented.

Space Station Engineering and Technology Development: Proceedings of the Panel on In-Space Engineering Research and Technology Development

NASA Technical Reports Server (NTRS)

1985-01-01

In 1984 the ad hoc committee on Space Station Engineering and Technology Development of the Aeronautics and Space Engineering Board (ASEB) conducted a review of the National Aeronautics and Space Administration's (NASA's) space station program planning. The review addressed the initial operating configuration (IOC) of the station. The ASEB has reconstituted the ad hoc committee which then established panels to address each specific related subject. The participants of the panels come from the committee, industry, and universities. The proceedings of the Panel on In Space Engineering Research and Technology Development are presented in this report. Activities, and plans for identifying and developing R&T programs to be conducted by the space station and related in space support needs including module requirements are addressed. Consideration is given to use of the station for R&T for other government agencies, universities, and industry.

Comprehensive List of Cancer-Related Genetic Variations of the NCI-60 Panel | Center for Cancer Research

Cancer.gov

The NCI-60 cell lines are the most frequently studied human tumor cell lines in cancer research. The panel of cell lines represents nine different types of cancer: breast, ovary, prostate, colon, lung, kidney, brain, leukemia, and melanoma. Originally developed to screen anticancer compounds by the NCI Developmental Therapeutics Program (DTP), the NCI-60 panel has generated

Development of aircraft lavatory compartments with improved fire resistance characteristics. Phase 2: Sandwich panel resin system development

NASA Technical Reports Server (NTRS)

Anderson, R. A.; Arnold, D. B.; Johnson, G. A.

1979-01-01

A NASA-funded program is described which aims to develop a resin system for use in the construction of lavatory wall panels, sidewall panels, and ceiling panels possessing flammability, smoke and gas emission, and toxicity (FS&T) characteristics superior to the existing epoxy resin. Candidate resins studied were phenolic, polyimide, and bismaleimide. Based on the results of a series of FS&T as well as mechanical and aesthetic property tests, a phenolic resin was chosen as the superior material. Material and process specifications covering the phenolic resin based materials were prepared and a method of rating sandwich panel performance was developed.

Design, testing, and damage tolerance study of bonded stiffened composite wing cover panels

NASA Technical Reports Server (NTRS)

Madan, Ram C.; Sutton, Jason O.

1988-01-01

Results are presented from the application of damage tolerance criteria for composite panels to multistringer composite wing cover panels developed under NASA's Composite Transport Wing Technology Development contract. This conceptual wing design integrated aeroelastic stiffness constraints with an enhanced damage tolerance material system, in order to yield optimized producibility and structural performance. Damage tolerance was demonstrated in a test program using full-sized cover panel subcomponents; panel skins were impacted at midbay between stiffeners, directly over a stiffener, and over the stiffener flange edge. None of the impacts produced visible damage. NASTRAN analyses were performed to simulate NDI-detected invisible damage.

Housing and Wood Products Assessment.

DTIC Science & Technology

1982-12-10

1981 to a peak of of floor area, the North Central almost 3 million in 1972 when region 1,670 square feet, the government subsidy programs were South...other masonry alterations. lumber by plywood. Lumber has Interior decorative panel already been effectively elimina- products are also used widely in...possible savings in walls . already been effectively elimi- is 25 percent and 40 percent on nated in these markets and future roofs. Wood joist floor

Solid Earth science in the 1990s. Volume 3: Measurement techniques and technology

NASA Technical Reports Server (NTRS)

1991-01-01

Reports are contained from the NASA Workshop on Solid Earth Science in the 1990s. The techniques and technologies needed to address the program objectives are discussed. The Measurement Technique and Technology Panel identified (1) candidate measurement systems for each of the measurements required for the Solid Earth Science Program that would fall under the NASA purview; (2) the capabilities and limitations of each technique; and (3) the developments necessary for each technique to meet the science panel requirements. In nearly all cases, current technology or a development path with existing technology was identified as capable of meeting the requirements of the science panels. These technologies and development paths are discussed.

Promoting Business and Entrepreneurial Awareness in Health Care Professionals: Lessons From Venture Capital Panels at Medicine 2.0 Conferences

PubMed Central

Patel, Jigar; Eysenbach, Gunther

2014-01-01

There are few mechanisms that bring the academic and business worlds together in a way that would maximize the success of health technology (health tech) start-ups by increasing researchers’ knowledge about how to operate in the business world. Existing solutions (eg, technology transfer offices and dual degree MD/MBA programs) are often unavailable to researchers from outside the institution or to those who have already completed their primary education, such as practicing physicians. This paper explores current solutions and offers a partial solution: include venture capital (VC) panels in medical conferences. These VC panels educate academics on 2 important and interconnected issues: how to “pitch” their ideas in the business world and what to consider when creating a company. In these sessions, academia-based start-up companies present their ideas before a VC panel composed of professional investors and receive feedback on their idea, business plan, and presentation techniques. Recent panel recommendations from Medicine 2.0 conferences fell into 7 categories: (1) the product, service, or idea you are developing into a company, (2) determine market forces and identify the target audience, (3) describe your competitive advantage, (4) the business plan, (5) current and future resources and capabilities, (6) legal aspects, and (7) general advice on the art of pitching. The academic and business literature validates many of these recommendations suggesting that VC panels may be a viable and cost-effective introduction to business and entrepreneurial education for physicians and other health care professionals. Panels benefit not only the presenting companies, but also the physicians, psychologists, and other health care professionals attending the session. Incorporating VC panels into academic conferences might also illuminate the need for incorporating relevant business training within academia. PMID:25100579

Promoting business and entrepreneurial awareness in health care professionals: lessons from venture capital panels at medicine 2.0 conferences.

PubMed

Miron-Shatz, Talya; Shatz, Itamar; Becker, Stefan; Patel, Jigar; Eysenbach, Gunther

2014-08-06

There are few mechanisms that bring the academic and business worlds together in a way that would maximize the success of health technology (health tech) start-ups by increasing researchers' knowledge about how to operate in the business world. Existing solutions (eg, technology transfer offices and dual degree MD/MBA programs) are often unavailable to researchers from outside the institution or to those who have already completed their primary education, such as practicing physicians. This paper explores current solutions and offers a partial solution: include venture capital (VC) panels in medical conferences. These VC panels educate academics on 2 important and interconnected issues: how to "pitch" their ideas in the business world and what to consider when creating a company. In these sessions, academia-based start-up companies present their ideas before a VC panel composed of professional investors and receive feedback on their idea, business plan, and presentation techniques. Recent panel recommendations from Medicine 2.0 conferences fell into 7 categories: (1) the product, service, or idea you are developing into a company, (2) determine market forces and identify the target audience, (3) describe your competitive advantage, (4) the business plan, (5) current and future resources and capabilities, (6) legal aspects, and (7) general advice on the art of pitching. The academic and business literature validates many of these recommendations suggesting that VC panels may be a viable and cost-effective introduction to business and entrepreneurial education for physicians and other health care professionals. Panels benefit not only the presenting companies, but also the physicians, psychologists, and other health care professionals attending the session. Incorporating VC panels into academic conferences might also illuminate the need for incorporating relevant business training within academia.

Mir Environmental Effects Payload and Returned Mir Solar Panel Cleanliness

NASA Technical Reports Server (NTRS)

Harvey, Gale A.; Humes, Donald H.; Kinard, William H.

2000-01-01

The MIR Environmental Effects Payload (MEEP) was attached to the Docking Module of the MIR space station for 18 months during calendar years 1996 and 1997 (March 1996, STS 76 to October 1997, STS 86). A solar panel array with more than 10 years space exposure was removed from the MIR core module in November 1997, and returned to Earth in January, 1998, STS 89. MEEP and the returned solar array are part of the International Space Station (ISS) Risk Mitigation Program. This space flight hardware has been inspected and studied by teams of space environmental effects (SEE) investigators for micrometeoroid and space debris effects, space exposure effects on materials, and electrical performance. This paper reports changes in cleanliness of parts of MEEP and the solar array due to the space exposures. Special attention is given to the extensive water soluble residues deposited on some of the flight hardware surfaces. Directionality of deposition and chemistry of these residues are discussed.

NOAA Office of Exploration and Research > Education > Materials

Science.gov Websites

2014 Funding Opportunities Contact Us Program Review Review Panel Final Report Review Team Documents Review Review Panel Final Report Review Team Documents Presentations Supporting Documents Guiding

77 FR 25686 - Malcolm Baldrige National Quality Award Board of Overseers and Panel of Judges

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

..., Baldrige Enterprise Update, Judges Panel Update, Baldrige Fellows Program Discussion, and Strategic Planning. DATES: The meeting will convene on Thursday, June 14, 2012, at 8:30 a.m. Eastern time and adjourn...

78 FR 16860 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... Panel; Program Project: A Proteomics Research Center for Integrative Biology. Date: April 8-10, 2013... Special Emphasis Panel; Member Conflict: Cancer Biology. Date: April 11, 2013. Time: 2:00 p.m. to 4:30 p.m...

The Annual Report of the National Shipbuilding Research Program (The Naval Shipbuilding Research Program)

DTIC Science & Technology

1986-08-29

Abrasives Work Planning for Shipyard SP&C Training Overcoating of Zinc Primers Citric Acid Cleaning - Phase II - Waterborne Coatings Economics of...members workout organizational problems with minimum government involvement a set of strong, committed, and sometimes fiercely independent panels and...01 Manual of Welding Planning and Design Guidelines - Phase III PANEL SP-3 Ship Design Considerations: Adaptation of Japanese Pre - 7 9 79 81 82 83 83

Technology transfer within the government

NASA Technical Reports Server (NTRS)

Russell, John

1992-01-01

The report of a workshop panel concerned with technology transfer within the government is presented. The presentation is made in vugraph form. The assigned subtopic for this panel are as follows: (1) transfer from non-NASA US government technology developers to NASA space missions/programs; and (2) transfer from NASA to other US government space mission programs. A specific area of inquiry was Technology Maturation Milestones. Three areas were investigated: technology development; advanced development; and flight hardware development.

Report of the panel on geopotential fields: Gravity field, section 8

NASA Technical Reports Server (NTRS)

Anderson, Allen Joel; Kaula, William M.; Lazarewics, Andrew R.; Lefebvre, Michel; Phillips, Roger J.; Rapp, Richard H.; Rummel, Reinhard F.; Smith, David E.; Tapley, Byron D.; Zlotnick, Victor

1991-01-01

The objective of the Geopotential Panel was to develop a program of data acquisition and model development for the Earth's gravity and magnetic fields that meet the basic science requirements of the solid Earth and ocean studies. Presented here are the requirements for gravity information and models through the end of the century, the present status of our knowledge, data acquisition techniques, and an outline of a program to meet the requirements.

User's manual: Subsonic/supersonic advanced panel pilot code

NASA Technical Reports Server (NTRS)

Moran, J.; Tinoco, E. N.; Johnson, F. T.

1978-01-01

Sufficient instructions for running the subsonic/supersonic advanced panel pilot code were developed. This software was developed as a vehicle for numerical experimentation and it should not be construed to represent a finished production program. The pilot code is based on a higher order panel method using linearly varying source and quadratically varying doublet distributions for computing both linearized supersonic and subsonic flow over arbitrary wings and bodies. This user's manual contains complete input and output descriptions. A brief description of the method is given as well as practical instructions for proper configurations modeling. Computed results are also included to demonstrate some of the capabilities of the pilot code. The computer program is written in FORTRAN IV for the SCOPE 3.4.4 operations system of the Ames CDC 7600 computer. The program uses overlay structure and thirteen disk files, and it requires approximately 132000 (Octal) central memory words.

A novel heuristic for optimization aggregate production problem: Evidence from flat panel display in Malaysia

NASA Astrophysics Data System (ADS)

Al-Kuhali, K.; Hussain M., I.; Zain Z., M.; Mullenix, P.

2015-05-01

Aim: This paper contribute to the flat panel display industry it terms of aggregate production planning. Methodology: For the minimization cost of total production of LCD manufacturing, a linear programming was applied. The decision variables are general production costs, additional cost incurred for overtime production, additional cost incurred for subcontracting, inventory carrying cost, backorder costs and adjustments for changes incurred within labour levels. Model has been developed considering a manufacturer having several product types, which the maximum types are N, along a total time period of T. Results: Industrial case study based on Malaysia is presented to test and to validate the developed linear programming model for aggregate production planning. Conclusion: The model development is fit under stable environment conditions. Overall it can be recommended to adapt the proven linear programming model to production planning of Malaysian flat panel display industry.

Imperfection and Thickness Measurement of Panels Using a Coordinate Measurement Machine

NASA Technical Reports Server (NTRS)

Thornburgh, Robert P.

2006-01-01

This paper summarizes the methodology used to measure imperfection and thickness variation for flat and curved panels using a Coordinate Measurement Machine (CMM) and the software program MeasPanel. The objective is to provide a reference document so that someone with a basic understanding of CMM operation can measure a panel with minimal training. Detailed information about both the measurement system setup and computer software is provided. Information is also provided about the format of the raw data, as well as how it is post-processed for use in finite-element analysis.

Prediction and verification of creep behavior in metallic materials and components for the space shuttle thermal protection system. Volume 3, phase 3: Full size heat shield data correlation and design criteria. [reentry

NASA Technical Reports Server (NTRS)

Cramer, B. A.; Davis, J. W.

1975-01-01

Analysis methods for predicting cyclic creep deflection in stiffened metal panel structures, were applied to full size panels. Results were compared with measured deflections from cyclic tests of thin gage L605, Rene' 41, and TDNiCr full size corrugation stiffened panels. A design criteria was then formulated for metallic thermal protection panels subjected to creep. A computer program was developed to calculate creep deflections.

Legacy of Biomedical Research During the Space Shuttle Program

NASA Technical Reports Server (NTRS)

Hayes, Judith C.

2011-01-01

The Space Shuttle Program provided many opportunities to study the role of spaceflight on human life for over 30 years and represented the longest and largest US human spaceflight program. Outcomes of the research were understanding the effect of spaceflight on human physiology and performance, countermeasures, operational protocols, and hardware. The Shuttle flights were relatively short, < 16 days and routinely had 4 to 6 crewmembers for a total of 135 flights. Biomedical research was conducted on the Space Shuttle using various vehicle resources. Specially constructed pressurized laboratories called Spacelab and SPACEHAB housed many laboratory instruments to accomplish experiments in the Shuttle s large payload bay. In addition to these laboratory flights, nearly every mission had dedicated human life science research experiments conducted in the Shuttle middeck. Most Shuttle astronauts participated in some life sciences research experiments either as test subjects or test operators. While middeck experiments resulted in a low sample per mission compared to many Earth-based studies, this participation allowed investigators to have repetition of tests over the years on successive Shuttle flights. In addition, as a prelude to the International Space Station (ISS), NASA used the Space Shuttle as a platform for assessing future ISS hardware systems and procedures. The purpose of this panel is to provide an understanding of science integration activities required to implement Shuttle research, review biomedical research, characterize countermeasures developed for Shuttle and ISS as well as discuss lessons learned that may support commercial crew endeavors. Panel topics include research integration, cardiovascular physiology, neurosciences, skeletal muscle, and exercise physiology. Learning Objective: The panel provides an overview from the Space Shuttle Program regarding research integration, scientific results, lessons learned from biomedical research and countermeasure development.

77 FR 51542 - Medicare Program; Solicitation of Two Nominations to the Advisory Panel on Hospital Outpatient...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... effective through November 15, 2013. DATES: Submission of Nominations: We will consider nominations if they... (local) for additional information. News Media: Representatives should contact the CMS Press Office at...)(A) of the Social Security Act (the Act), and section 222 of the Public Health Service Act (PHS Act...

No Bullies Allowed: Understanding Peer Victimization, the Impacts on Delinquency, and the Effectiveness of Prevention Programs

ERIC Educational Resources Information Center

Wong, Jennifer S.

2009-01-01

Over the past decade, school bullying has emerged as a prominent issue of concern for students, parents, educators, and researchers around the world. Research evidence suggests nontrivial and potentially serious negative repercussions of both bullying and victimization. This dissertation uses a large, nationally representative panel dataset and a…

Selection into Medicine Using Interviews and Other Measures: Much Remains to Be Learned

ERIC Educational Resources Information Center

Ma, Colleen; Harris, Peter; Cole, Andrew; Jones, Phil; Shulruf, Boaz

2016-01-01

The objectives of this study were to identify the effectiveness of the panel admission interview as a selection tool for the medical program and identify improvements in the selection tools battery. Data from 1024 students, representing four cohorts of students were used in this study. Exploratory factor analysis using principal component analysis…

Recruitment and Retention of Full-Time Engineering Faculty, Fall 1980. Higher Education Panel Report Number 52.

ERIC Educational Resources Information Center

Atelsek, Frank J.; Gomberg, Irene L.

The extent of faculty vacancies in colleges of engineering, the effects of such vacancies upon research and instructional programs, and the nature of the competition between academia and industry in hiring engineering faculty were surveyed. The focus is on permanent full-time faculty positions in the following major engineering fields:…

The effect of Medicaid premiums on enrollment: a regression discontinuity approach.

PubMed

Dague, Laura

2014-09-01

This paper estimates the effect that premiums in Medicaid have on the length of enrollment of program beneficiaries. Whether and how low income-families will participate in the exchanges and in states' Medicaid programs depends crucially on the structure and amounts of the premiums they will face. I take advantage of discontinuities in the structure of Wisconsin's Medicaid program to identify the effects of premiums on enrollment for low-income families. I use a 3-year administrative panel of enrollment data to estimate these effects. I find an increase in the premium from 0 to 10 dollars per month results in 1.4 fewer months enrolled and reduces the probability of remaining enrolled for a full year by 12 percentage points, but other discrete changes in premium amounts do not affect enrollment or have a much smaller effect. I find no evidence of program enrollees intentionally decreasing labor supply in order to avoid the premiums. Copyright © 2014 Elsevier B.V. All rights reserved.

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

NASA Technical Reports Server (NTRS)

Miller, R. D.; Anderson, L. R.

1979-01-01

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

Space station operations task force. Panel 4 report: Management integration

NASA Technical Reports Server (NTRS)

1987-01-01

The Management Integration Panel of the Space Station Operations Task Force was chartered to provide a structure and ground rules for integrating the efforts of the other three panels and to address a number of cross cutting issues that affect all areas of space station operations. Issues addressed include operations concept implementation, alternatives development and integration process, strategic policy issues and options, and program management emphasis areas.

Report of the Fusion Energy Sciences Advisory Committee Panel on Priorities and Balance

NASA Astrophysics Data System (ADS)

Baker, Charles; Davidson, Ronald; Dean, Stephen; Freidberg, Jeffrey; Sheffield, John

1999-06-01

This report presents the results and recommendations of the deliberations of the DOE Fusion Energy Sciences Advisory Committee (FESAC) Panel on Priorities and Balance, which met in Knoxville, TN, 18-21 August 1999. The Panel identified the achievement of a more integrated national program in magnetic fusion energy (MFE) and inertial fusion energy (IFE) as a major programmatic and policy goal for the years ahead.

Prediction of Supersonic Store Separation Characteristics Including Fuselage and Stores of Noncircular Cross Section, Volume IV. Appendices C and D, Details of Program II.

DTIC Science & Technology

1980-11-01

act in the sense displayed in Figure 17 of Volume II. All moments are about the store moment center COMMON /ONE/ DELTP(250),FN(250), PNLC (250),SWPPLE...linear loading pressure coefficient of Jth u-velocity panel FN(J) normal force divided by q for Jth u-velocity panel PNLC (J) panel chord through control

The state of chronic pain education in geriatric medicine fellowship training programs: results of a national survey.

PubMed

Weiner, Debra K; Turner, Gregory H; Hennon, John G; Perera, Subashan; Hartmann, Susanne

2005-10-01

A survey of U.S. geriatric medicine fellowship training programs was performed to assess the status of teaching about chronic pain evaluation and management and identify opportunities for improvement. After an initial e-mail query, 43 of 96 programs agreed to participate. A self-administered questionnaire, with items adapted from a 2002 consensus panel statement, was mailed to their 171 fellows-in-training and 43 fellowship directors. Thirty-two programs (33% of nationwide sample) including 79 fellows (30% of nationwide sample) and 25 directors (26% of nationwide sample) returned surveys; 21 institutions returned both faculty and fellow surveys. Overall, directors endorsed the 19 items identified by the consensus panel as essential components of fellowship training, but fellows identified deficiencies, both before and during fellowship training. Specific areas of undereducation included comprehensive musculoskeletal assessment, neuropathic pain evaluation, indications for low back pain imaging, the role of multidisciplinary pain clinics and nonpharmacological modalities, the effect of physical and psychosocial comorbidities in formulating treatment goals, and the effect of aging on analgesic metabolism and prescription. Both groups were generally positive about fellows' abilities to implement pain-related clinical skills. Discrepancies existed between fellowship directors' ratings of importance of teaching individual items and the degree to which teaching was actually done, as well as faculty versus fellow assessments of whether some of the 19 items were taught. Primary care training programs (e.g., internal medicine, family medicine, geriatric medicine) should pay more systematic attention to educating trainees about chronic pain to optimize patient care, decrease suffering, and diminish healthcare expenditures.

Panel Sessions.

ERIC Educational Resources Information Center

Proceedings of the ASIS Mid-Year Meeting, 1992

1992-01-01

Lists the speakers and summarizes the issues addressed for 12 panel sessions on topics related to networking, including libraries and national networks, federal national resources and energy programs, multimedia issues, telecommuting, remote image serving, accessing the Internet, library automation, scientific information, applications of Z39.50,…

75 FR 63491 - National Institute on Drug Abuse; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... Drug Abuse Special Emphasis Panel, NIDA Research Education and Science Education Program Review (R25... Panel, NIDA Basic Science Conference Grant (R13) Review. Date: October 27, 2010. Time: 9 a.m. to 5 p.m...

Design guide for precast UHPC waffle deck panel system, including connections.

DOT National Transportation Integrated Search

2013-06-01

As a part of an innovation project funded by the Federal Highway Administration (FHWA) Highways for LIFE program, a full-depth precast, ultra-high-performance concrete (UHPC) waffle deck panel and appropriate connections suitable for field implementa...

Advanced high school biology in an era of rapid change: a summary of the biology panel report from the NRC Committee on Programs for Advanced Study of Mathematics and Science in American High Schools.

PubMed

Wood, William B

2002-01-01

A recently released National Research Council (NRC) report, Learning and Understanding: Improving Advanced Study of Mathematics and Science in U.S. High Schools, evaluated and recommended changes in the Advanced Placement (AP), International Baccalaureate (IB), and other advanced secondary school science programs. As part of this study, discipline-specific panels were formed to evaluate advanced programs in biology, chemistry, physics, and mathematics. Among the conclusions of the Content Panel for Biology were that AP courses in particular suffer from inadequate quality control as well as excessive pressure to fulfill their advanced placement function, which encourages teachers to attempt coverage of all areas of biology and emphasize memorization of facts rather than in-depth understanding. In this essay, the Panel's principal findings are discussed, with an emphasis on its recommendation that colleges and universities should be strongly discouraged from using performance on either the AP examination or the IB examination as the sole basis for automatic placement out of required introductory courses for biology majors and distribution requirements for nonmajors.

Advanced High School Biology in an Era of Rapid Change: A Summary of the Biology Panel Report from the NRC Committee on Programs for Advanced Study of Mathematics and Science in American High Schools

PubMed Central

2002-01-01

A recently released National Research Council (NRC) report, Learning and Understanding: Improving Advanced Study of Mathematics and Science in U.S. High Schools, evaluated and recommended changes in the Advanced Placement (AP), International Baccalaureate (IB), and other advanced secondary school science programs. As part of this study, discipline-specific panels were formed to evaluate advanced programs in biology, chemistry, physics, and mathematics. Among the conclusions of the Content Panel for Biology were that AP courses in particular suffer from inadequate quality control as well as excessive pressure to fulfill their advanced placement function, which encourages teachers to attempt coverage of all areas of biology and emphasize memorization of facts rather than in-depth understanding. In this essay, the Panel's principal findings are discussed, with an emphasis on its recommendation that colleges and universities should be strongly discouraged from using performance on either the AP examination or the IB examination as the sole basis for automatic placement out of required introductory courses for biology majors and distribution requirements for nonmajors. PMID:12669097

n/a

NASA Image and Video Library

2007-08-09

Under the goals of the Vision for Space Exploration, Ares I is a chief component of the cost-effective space transportation infrastructure being developed by NASA's Constellation Program. This transportation system will safely and reliably carry human explorers back to the moon, and then onward to Mars and other destinations in the solar system. The Ares I effort includes multiple project element teams at NASA centers and contract organizations around the nation, and is managed by the Exploration Launch Projects Office at NASA's Marshall Space Flight Center (MFSC). ATK Launch Systems near Brigham City, Utah, is the prime contractor for the first stage booster. ATK's subcontractor, United Space Alliance of Houston, is designing, developing and testing the parachutes at its facilities at NASA's Kennedy Space Center in Florida. NASA's Johnson Space Center in Houston hosts the Constellation Program and Orion Crew Capsule Project Office and provides test instrumentation and support personnel. Together, these teams are developing vehicle hardware, evolving proven technologies, and testing components and systems. Their work builds on powerful, reliable space shuttle propulsion elements and nearly a half-century of NASA space flight experience and technological advances. Ares I is an inline, two-stage rocket configuration topped by the Crew Exploration Vehicle, its service module, and a launch abort system. This HD video image depicts friction stir welding used in manufacturing aluminum panels that will fabricate the Ares I upper stage barrel. The aluminum panels are subjected to confidence panel tests during which the bent aluminum is stressed to breaking point and thoroughly examined. The panels are manufactured by AMRO Manufacturing located in El Monte, California. (Highest resolution available)

Effects of Cancer Genetic Panel Testing on at-Risk Individuals.

PubMed

Frost, Anja S; Toaff, Miriam; Biagi, Tara; Stark, Elizabeth; McHenry, Allison; Kaltman, Rebecca

2018-06-01

To evaluate the role of screening patients at increased risk for hereditary cancer syndromes with an extended panel of cancer predisposition genes to identify actionable genetic mutations. A retrospective chart review was conducted of all patients presenting to a multidisciplinary cancer program for genetic counseling and testing from January 2015 to December 2016. Individuals presenting to the program were identified as at-risk by a personal or family history of cancer, by their health care provider, or by self-referral. All participants met current National Comprehensive Cancer Network criteria for genetic risk evaluation for hereditary cancer. The results of testing and its implications for management, based on National Comprehensive Cancer Network guidelines, were recorded. Of 670 at-risk patients who underwent genetic testing, 66 (9.9%) had BRCA-limited testing; of these, 26 of 670 (3.9%) had a deleterious or likely pathogenic mutation. Expanded panel testing was done for 560 of the 670 patients (83.4%), and abnormal results were found in 65 of 670 (9.7%); non-BRCA mutations (predominantly CHEK2) were found in 49 of the 65 (75%). Abnormal genetic testing was associated with increased surveillance in 96% of those with deleterious mutations, whereas negative testing for a known familial mutation in 45 patients was associated with a downgrade of their risk and reduction of subsequent surveillance and management. Guideline-based management is frequently altered by genetic testing, including panel testing, in patients at risk for cancer. We recommend that obstetrics and gynecology providers routinely refer at-risk patients for genetic counseling and testing when clinically appropriate.

Aerospace Safety Advisory Panel report to the NASA acting administrator

NASA Technical Reports Server (NTRS)

1986-01-01

The level of activity of the Aerospace Safety Advisory Panel was increased smewhat during 1985 in concert with the increased mission rate of the National Space Transportation System, the evolutionary changes in management and operation of that program, and the preparation of the Vandenberg Launch Site; the implementation of the Program Definition Phase of the Space Station Program; and the actual flight testing of the X-29 research aircraft. Impending payload STS missions and NASA's overall aircraft operations are reviewed. The safety aspects of the LEASAT salvage mission were assessed. The findings and recommendation of the committee are summerized.

Operating Room Efficiency before and after Entrance in a Benchmarking Program for Surgical Process Data.

PubMed

Pedron, Sara; Winter, Vera; Oppel, Eva-Maria; Bialas, Enno

2017-08-23

Operating room (OR) efficiency continues to be a high priority for hospitals. In this context the concept of benchmarking has gained increasing importance as a means to improve OR performance. The aim of this study was to investigate whether and how participation in a benchmarking and reporting program for surgical process data was associated with a change in OR efficiency, measured through raw utilization, turnover times, and first-case tardiness. The main analysis is based on panel data from 202 surgical departments in German hospitals, which were derived from the largest database for surgical process data in Germany. Panel regression modelling was applied. Results revealed no clear and univocal trend of participation in a benchmarking and reporting program for surgical process data. The largest trend was observed for first-case tardiness. In contrast to expectations, turnover times showed a generally increasing trend during participation. For raw utilization no clear and statistically significant trend could be evidenced. Subgroup analyses revealed differences in effects across different hospital types and department specialties. Participation in a benchmarking and reporting program and thus the availability of reliable, timely and detailed analysis tools to support the OR management seemed to be correlated especially with an increase in the timeliness of staff members regarding first-case starts. The increasing trend in turnover time revealed the absence of effective strategies to improve this aspect of OR efficiency in German hospitals and could have meaningful consequences for the medium- and long-run capacity planning in the OR.

2006 National Small Business Conference - Meeting DOD/DHS Mission Needs in the 21st Century

DTIC Science & Technology

2006-05-10

Untitled Document National Small Business Conference.html[7/7/2016 1:35:33 PM] National Small Business Conference "Meeting DoD/DHS Mission Needs in...Defense Systems (Will be available soon) Panel: Program Manager’s Perspective on Small Business Contributions to Major Programs • Mr. Michael Hoeffler...Vice President, Future Naval Capability, Raytheon Company Small Business Success Story Panel: • Mr. Jay Boyce, Foster-Miller, Inc. (Will be

U.S. Space Program Benefits to Education. Hearing before the Subcommittee on Space of the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Second Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This hearing was held to review the educational benefits of the U.S. Space Program. Testimony was given by three panels of experts related to this topic. The three panels consisted of: (1) Daniel S. Goldin, Administrator, National Aeronautics and Space Administration (NASA); Dan Brandenstein, Captain, U.S. Navy, NASA Astronaut; and Damon Butler,…

The Federal Investment in Science, Mathematics, Engineering, and Technology Education: Where Now? What Next? Report of the Expert Panel for the Review of Federal Education Programs in Science, Mathematics, Engineering, and Technology.

ERIC Educational Resources Information Center

Federal Coordinating Council for Science, Engineering and Technology, Washington, DC.

Despite efforts to improve the quality and equity of science, mathematics, engineering, and technology (SMET) education at all educational levels, the nation remains at risk of losing its competitive edge. This report presents the findings of a special panel convened for two purposes: (1) to review federal programs in SMET education at all levels;…

Exascale Workshop Panel Report Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaleel, Mohammad A.

2010-07-01

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusionsmore » with regard to the justification of a DOE-led exascale initiative.« less

Luminance uniformity compensation for OLED panels based on FPGA

NASA Astrophysics Data System (ADS)

Ou, Peng; Yang, Gang; Jiang, Quan; Yu, Jun-Sheng; Wu, Qi-Peng; Shang, Fu-Hai; Yin, Wei; Wang, Jun; Zhong, Jian; Luo, Kai-Jun

2009-09-01

Aiming at the problem of luminance uniformity for organic lighting-emitting diode (OLED) panels, a new brightness calculating method based on bilinear interpolation is proposed. The irradiance time of each pixel reaching the same luminance is figured out by Matlab. Adopting the 64×32-pixel, single color and passive matrix OLED panel as adjusting luminance uniformity panel, a new circuit compensating scheme based on FPGA is designed. VHDL is used to make each pixel’s irradiance time in one frame period written in program. The irradiance brightness is controlled by changing its irradiance time, and finally, luminance compensation of the panel is realized. The simulation result indicates that the design is reasonable.

Single-strain-gage force/stiffness buckling prediction techniques on a hat-stiffened panel

NASA Technical Reports Server (NTRS)

Hudson, Larry D.; Thompson, Randolph C.

1991-01-01

Predicting the buckling characteristics of a test panel is necessary to ensure panel integrity during a test program. A single-strain-gage buckling prediction method was developed on a hat-stiffened, monolithic titanium buckling panel. The method is an adaptation of the original force/stiffness method which requires back-to-back gages. The single-gage method was developed because the test panel did not have back-to-back gages. The method was used to predict buckling loads and temperatures under various heating and loading conditions. The results correlated well with a finite element buckling analysis. The single-gage force/stiffness method was a valid real-time and post-test buckling prediction technique.

Expert panel answers questions for Super Safety and Health Day at KSC.

NASA Technical Reports Server (NTRS)

1999-01-01

A panel of NASA and contractor senior staff, plus officers from the 45th Space Wing, discuss safety- and health-related concerns in front of an audience of KSC employees, as part of Super Safety and Health Day. Moderating at the podium is Loren Shriver, deputy director for Launch & Payload Processing. Seated left to right are Burt Summerfield, associate director of the Biomedical Office; Colonel William S. Swindling, commander, 45th Medical Group, Patrick Air Force Base, Fla.; Ron Dittemore, manager, Space Shuttle Programs, Johnson Space Center; Roy Bridges, Center Director; Col. Tom Deppe, vice commander, 45th Space Wing, Patrick Air Force Base; Jim Schoefield, program manager, Payload Ground Operations, Boeing; Bill Hickman, program manager, Space Gateway Support; and Ed Adamek, vice president and associate program manager for Ground Operations, United Space Alliance. The panel was one of the presentations during KSC's second annual day-long dedication to safety. Most normal work activities were suspended to allow personnel to attend related activities. The theme, 'Safety and Health Go Hand in Hand,' emphasized KSC's commitment to place the safety and health of the public, astronauts, employees and space-related resources first and foremost. Events also included a keynote address, vendor exhibits, and safety training in work groups. The keynote address and panel session were also broadcast internally over NASA television.

Expert panel answers questions for Super Safety and Health Day at KSC.

NASA Technical Reports Server (NTRS)

1999-01-01

A panel of NASA and contractor senior staff, plus officers from the 45th Space Wing, discuss safety- and health-related concerns in front of an audience of KSC employees as part of Super Safety and Health Day. Moderating at the podium is Loren Shriver, deputy director for Launch & Payload Processing. Seated left to right are Burt Summerfield, associate director of the Biomedical Office; Colonel William S. Swindling, commander, 45th Medical Group, Patrick Air Force Base, Fla.; Ron Dittemore, manager, Space Shuttle Programs, Johnson Space Center; Roy Bridges, Center Director; Col. Tom Deppe, vice commander, 45th Space Wing, Patrick Air Force Base; Jim Schoefield, program manager, Payload Ground Operations, Boeing; Bill Hickman, program manager, Space Gateway Support; and Ed Adamek, vice president and associate program manager for Ground Operations, United Space Alliance. Answering a question at the microphone on the floor is Dave King, director, Shuttle Processing. The panel was one of the presentations during KSC's second annual day-long dedication to safety. Most normal work activities were suspended to allow personnel to attend related activities. The theme, 'Safety and Health Go Hand in Hand,' emphasized KSC's commitment to place the safety and health of the public, astronauts, employees and space- related resources first and foremost. Events also included a keynote address, vendor exhibits, and safety training in work groups. The keynote address and panel session were also broadcast internally over NASA television.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eich, Hans Theodor; Gossmann, Axel; Engert, Andreas

Purpose: The role of radiotherapy (RT) after intensive chemotherapy in patients with advanced stage Hodgkin's lymphoma (HL) is still unclear. The German Hodgkin Study Group (GHSG) randomized HD12 trial was designed to test whether consolidative RT in the region of initial bulky disease and of residual disease is necessary after effective chemotherapy. A quality control program based on a multidisciplinary panel of radiation oncologists, radiologists, and medical oncologists who reviewed all patients' staging and restaging imaging was initiated. Methods and Materials: A total of 1661 patients aged 16 to 65 years with HL in Stage IIB (large mediastinal mass and/ormore » E-lesions) or Stage III to IV were randomized from January 1999 to January 2003 according to a factorial design between: 8 esc.BEACOPP + RT (arm A), 8 esc.BEACOPP non-RT (arm B), 4+4BEACOPP + RT (arm C), 4+4BEACOPP non-RT (arm D). Results: In the fifth interim analysis, 1449 patients were eligible for the arm comparison with regard to RT. After a median observation time of 48 months the FFTF rate was 86% and the OS 92%. The FFTF was 95% in the RT arms A+C and 88% in the non-RT arms B+D: no sequential significant difference. One thousand and eighty four patients were evaluated by the panel. The panel defined initial bulky disease in 800 patients and residual disease in 600 patients. The panel recommended continuation of therapy according to the randomization for 934 of 1084 patients and additive RT independently from the randomization arm for 145 of 1084 patients. Conclusions: The study showed that RT can be reduced substantially after effective chemotherapy. However, because of the irradiation of 10% of patients in the non-RT arms, equivalent effectiveness of a non-RT strategy cannot be proved. A substantial limitation of consolidative RT according to expert panel recommendations appears to be possible without reducing effectiveness.« less

46 CFR 503.58 - Appeals of denials of mandatory declassification review requests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PUBLIC INFORMATION Information Security Program § 503.58 Appeals of denials of mandatory declassification... Interagency Security Classification Appeals Panel. The appeal should be addressed to, Executive Secretary, Interagency Security Classification Appeals Panel, Attn: Classification Challenge Appeals, c/o Information...

46 CFR 503.58 - Appeals of denials of mandatory declassification review requests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PUBLIC INFORMATION Information Security Program § 503.58 Appeals of denials of mandatory declassification... Security Classification Appeals Panel. The appeal should be addressed to, Executive Secretary, Interagency Security Classification Appeals Panel, Attn: Classification Challenge Appeals, c/o Information Security...

77 FR 59934 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

....396, Cancer Biology Research; 93.397, Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399... Committee: National Cancer Institute Special Emphasis Panel; Minority-Based Community Clinical Oncology... Committee: National Cancer Institute Special Emphasis Panel; Exploratory/Developmental Research Programs in...

75 FR 10545 - Occupational Information Development Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... following areas: Medical and vocational analysis of disability claims; occupational analysis, including... system suited to its disability programs and improve the medical-vocational adjudication policies and... remaining time to deliberate or conduct other Panel business. Those interested in providing testimony in...

76 FR 19147 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-06

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: LIGO Laboratory Annual Review at Livingston Observatory for Physics...: Partially Closed. Contact Person: Thomas Carruthers, Program Director, Division of Physics, National Science...

Prediction and verification of creep behavior in metallic materials and components for the space shuttle thermal protection system. Volume 2: Phase 2 subsize panel cyclic creep predictions

NASA Technical Reports Server (NTRS)

Cramer, B. A.; Davis, J. W.

1975-01-01

A method for predicting permanent cyclic creep deflections in stiffened panel structures was developed. The resulting computer program may be applied to either the time-hardening or strain-hardening theories of creep accumulation. Iterative techniques were used to determine structural rotations, creep strains, and stresses as a function of time. Deflections were determined by numerical integration of structural rotations along the panel length. The analytical approach was developed for analyzing thin-gage entry vehicle metallic-thermal-protection system panels subjected to cyclic bending loads at high temperatures, but may be applied to any panel subjected to bending loads. Predicted panel creep deflections were compared with results from cyclic tests of subsize corrugation and rib-stiffened panels. Empirical equations were developed for each material based on correlation with tensile cyclic creep data and both the subsize panels and tensile specimens were fabricated from the same sheet material. For Vol. 1, see N75-21431.

Propulsion Systems Panel deliberations

NASA Technical Reports Server (NTRS)

Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; Mcgaw, Mike; Munafo, Paul M.

1993-01-01

The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

Final Environmental Assessment: Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst New Jersey

DTIC Science & Technology

2012-03-01

FINAL ENVIRONMENTAL ASSESSMENT Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst, New Jersey MARCH 2012...Final Environmental Assessment : Solar Panel Systems at Joint Base McGuire-Dix-Lakehurst New Jersey 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Purpose Finding of No Significant Impact (FONSI) Environmental Assessment (EA

Tree-level imputation techniques to estimate current plot-level attributes in the Pacific Northwest using paneled inventory data

Treesearch

Bianca Eskelson; Temesgen Hailemariam; Tara Barrett

2009-01-01

The Forest Inventory and Analysis program (FIA) of the US Forest Service conducts a nationwide annual inventory. One panel (20% or 10% of all plots in the eastern and western United States, respectively) is measured each year. The precision of the estimates for any given year from one panel is low, and the moving average (MA), which is considered to be the default...

Propulsion Systems Panel deliberations

NASA Astrophysics Data System (ADS)

Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; McGaw, Mike; Munafo, Paul M.

1993-02-01

The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

Finite Element Modeling of Fragment Penetration of Thin Structural Composite Laminates

DTIC Science & Technology

1991-12-01

his direction and assistance provided during the program. The following are registered trade names: Kevlar-29, 3M Co., Scotchply, Owens Corning Fiberglass...grains, are used. Composite laminates such as Owens Corning Fiberglass (R) panels, 3M Scotchply 1002 (R) panels and Kevlar-29 (R) reinforced plastic...results [2]: 1. Owens Corning Fiberglass (OCF) Structural Panels. Woven S-2 glass and a typical resin type, contert, sizing, and cure cycle at 220

An Extensive X-ray Computed Tomography Evaluation of a Fully Penetrated Encapsulated SiC MMC Ballistic Panel

DTIC Science & Technology

2009-04-01

An Extensive X-ray Computed Tomography Evaluation of a Fully Penetrated Encapsulated SiC MMC Ballistic Panel by William H. Green and Robert H...Panel William H. Green and Robert H. Carter Weapons and Materials Research Directorate, ARL...PROGRAM ELEMENT NUMBER 2182040 6. AUTHOR(S) William H. Green and Robert H. Carter 5d. PROJECT NUMBER AH80 5e. TASK NUMBER 5f. WORK UNIT

Assessing Student Achievement in the States. The First Report of the National Academy of Education Panel on the Evaluation of the NAEP Trial State Assessment: 1990 Trial State Assessment.

ERIC Educational Resources Information Center

National Academy of Education, Stanford, CA.

This report presents findings of the National Academy of Education Panel on the Evaluation of the Trial State Assessment (TSA) concerning the 1990 National Assessment of Educational Progress (NAEP) mathematics TSA program. The Panel's recommendations regarding the continuation of TSAs for review by the Congress, states, and Executive Branch of the…

Panel to review EOSDIS plans

NASA Technical Reports Server (NTRS)

1994-01-01

Formed in Jan. 1992, the Panel to Review EOSDIS Plans was charged with advising NASA on its plans for developing the Earth Observing System (EOS) Data and Information System (EOSDIS). Specifically, the panel was asked to do the following: assess the validity of the engineering and technical underpinnings of the EOSDIS; assess its potential value to scientific users; suggest how technical risk can be minimized; and assess whether current plans are sufficiently resilient to be adaptable to changing technology and requirements such as budget environments, data volumes, new users, and new databases. The panel completed an interim report (Addendum A) and transmitted it to NASA and other interested parties in the government on 9 Apr. 1992. Because of a delay in NASA's plans to select the contractor for EOSDIS, the panel was not able to complete its review of the program according to the original government request. With the issuance of a letter report (Addendum B) on 28 Sep. 1992, the panel became inactive until such time as NASA could release the details of the contractor's proposed architecture, schedule, and costs for developing EOSDIS. In early 1993, NASA awarded the contract for the EOSDIS Core System (ECS). On 20 Apr. 1993, NASA asked the panel to reconvene to do the following: ( 1) complete its review of NASA's approach to the EOSDIS architecture and implementation; (2) appraise NASA's responses to the panel's previous recommendations; and (3) review the planning for EOSDIS in the context of NASA's role in the Global Change Data and Information System (GCDIS) implementation plan. To respond to the NASA charge, the panel met three times in 1993 including sessions with NASA officials and the EOSDIS contractor. In addition, several of the panel members visited individual Distributed Active Archive Centers (DAAC's) to obtain additional views of EOSDIS. The panel has now obtained substantial information on the EOSDIS budget, contractor work program, and current baseline architecture that was not previously available, due to procurement restrictions. This report presents the panel's findings and recommendations based on this additional information.

Development and testing of cabin sidewall acoustic resonators for the reduction of cabin tone levels in propfan-powered aircraft

NASA Technical Reports Server (NTRS)

Kuntz, H. L.; Gatineau, R. J.; Prydz, R. A.; Balena, F. J.

1991-01-01

The use of Helmholtz resonators to increase the sidewall transmission loss (TL) in aircraft cabin sidewalls is evaluated. Development, construction, and test of an aircraft cabin acoustic enclosure, built in support of the Propfan Test Assessment (PTA) program, is described. Laboratory and flight test results are discussed. Resonators (448) were located between the enclosure trim panels and the fuselage shell. In addition, 152 resonators were placed between the enclosure and aircraft floors. The 600 resonators were each tuned to a propfan fundamental blade passage frequency (235 Hz). After flight testing on the PTA aircraft, noise reduction (NR) tests were performed with the enclosure in the Kelly Johnson Research and Development Center Acoustics Laboratory. Broadband and tonal excitations were used in the laboratory. Tonal excitation simulated the propfan flight test excitation. The resonators increase the NR of the cabin walls around the resonance frequency of the resonator array. Increases in NR of up to 11 dB were measured. The effects of flanking, sidewall absorption, cabin absorption, resonator loading of trim panels, and panel vibrations are presented. Resonator and sidewall panel design and test are discussed.

Dynamics Impact Tolerance of Shuttle RCC Leading Edge Panels Using LS-DYNA

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.; Lyle, Karen H.; Jones, Lisa E.; Hardy, Robin C.; Spellman, Regina L.; Carney, Kelly S.; Melis, Matthew E.; Stockwell, Alan E.

2005-01-01

This paper describes a research program conducted to enable accurate prediction of the impact tolerance of the shuttle Orbiter leading-edge wing panels using physics-based codes such as LS-DYNA, a nonlinear, explicit transient dynamic finite element code. The shuttle leading-edge panels are constructed of Reinforced-Carbon-Carbon (RCC) composite material, which is used because of its thermal properties to protect the shuttle during reentry into the Earth's atmosphere. Accurate predictions of impact damage from insulating foam and other debris strikes that occur during launch required materials characterization of expected debris, including strain-rate effects. First, analytical models of individual foam and RCC materials were validated. Next, analytical models of foam cylinders impacting 6- in. x 6-in. RCC flat plates were developed and validated. LS-DYNA pre-test models of the RCC flat plate specimens established the impact velocity of the test for three damage levels: no-detectable damage, non-destructive evaluation (NDE) detectable damage, or visible damage such as a through crack or hole. Finally, the threshold of impact damage for RCC on representative Orbiter wing panels was predicted for both a small through crack and for NDE-detectable damage.

Dynamic Impact Tolerance of Shuttle RCC Leading Edge Panels using LS-DYNA

NASA Technical Reports Server (NTRS)

Fasanella, Edwin; Jackson, Karen E.; Lyle, Karen H.; Jones, Lisa E.; Hardy, Robin C.; Spellman, Regina L.; Carney, Kelly S.; Melis, Matthew E.; Stockwell, Alan E.

2008-01-01

This paper describes a research program conducted to enable accurate prediction of the impact tolerance of the shuttle Orbiter leading-edge wing panels using 'physics-based- codes such as LS-DYNA, a nonlinear, explicit transient dynamic finite element code. The shuttle leading-edge panels are constructed of Reinforced-Carbon-Carbon (RCC) composite material, which issued because of its thermal properties to protect the shuttle during re-entry into the Earth's atmosphere. Accurate predictions of impact damage from insulating foam and other debris strikes that occur during launch required materials characterization of expected debris, including strain-rate effects. First, analytical models of individual foam and RCC materials were validated. Next, analytical models of individual foam cylinders impacting 6-in. x 6-in. RCC flat plates were developed and validated. LS-DYNA pre-test models of the RCC flat plate specimens established the impact velocity of the test for three damage levels: no-detectable damage, non-destructive evaluation (NDE) detectable damage, or visible damage such as a through crack or hole. Finally, the threshold of impact damage for RCC on representative Orbiter wing panels was predicted for both a small through crack and for NDE-detectable damage.

Laboratory test and acoustic analysis of cabin treatment for propfan test assessment aircraft

NASA Technical Reports Server (NTRS)

Kuntz, H. L.; Gatineau, R. J.

1991-01-01

An aircraft cabin acoustic enclosure, built in support of the Propfan Test Assessment (PTA) program, is described. Helmholtz resonators were attached to the cabin trim panels to increase the sidewall transmission loss (TL). Resonators (448) were located between the trim panels and fuselage shell. In addition, 152 resonators were placed between the enclosure and aircraft floors. The 600 resonators were each tuned to a 235 Hz resonance frequency. After flight testing on the PTA aircraft, the enclosure was tested in the Kelly Johnson R and D Center Acoustics Lab. Laboratory noise reduction (NR) test results are discussed. The enclosure was placed in a Gulfstream 2 fuselage section. Broadband (138 dB overall SPL) and tonal (149 dB overall SPL) excitations were used in the lab. Tonal excitation simulated the propfan flight test excitation. The fundamental tone was stepped in 2 Hz intervals from 225 through 245 Hz. The resonators increase the NR of the cabin walls around the resonance frequency of the resonator array. The effects of flanking, sidewall absorption, cabin adsorption, resonator loading of trim panels, and panel vibrations are presented. Increases in NR of up to 11 dB were measured.

Structural efficiency studies of corrugated compression panels with curved caps and beaded webs

NASA Technical Reports Server (NTRS)

Davis, R. C.; Mills, C. T.; Prabhakaran, R.; Jackson, L. R.

1984-01-01

Curved cross-sectional elements are employed in structural concepts for minimum-mass compression panels. Corrugated panel concepts with curved caps and beaded webs are optimized by using a nonlinear mathematical programming procedure and a rigorous buckling analysis. These panel geometries are shown to have superior structural efficiencies compared with known concepts published in the literature. Fabrication of these efficient corrugation concepts became possible by advances made in the art of superplastically forming of metals. Results of the mass optimization studies of the concepts are presented as structural efficiency charts for axial compression.

Roll diffusion bonding of titanium alloy panels

NASA Technical Reports Server (NTRS)

Bennett, J.; De Witt, T. E.; Jones, A. G.; Koeller, F.; Muser, C.

1968-01-01

Roll diffusion bonding technique is used for fabricating T-stiffened panel assemblies from titanium alloy. The single unit fabrication exhibits excellent strength characteristics under tensile and compressive loads. This program is applied to structures in which weight/strength ratio and integral construction are important considerations.

Panel I: Technology and Jobs.

ERIC Educational Resources Information Center

Appalachia, 1984

1984-01-01

Panel I features two case histories of state government, university, and private corporation cooperation to bring technology to the workplace (Microelectronics Center of North Carolina and Ben Franklin Partnership Program) and presentations about Burlington Industries and General Electric Company investments in technology to save jobs and boost…

76 FR 42736 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... meeting will review applications for Art History II in Fellowships Program, submitted to the Division of... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice...

75 FR 63514 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

.... Program: This meeting will review applications for Art History in Humanities Collections and Reference... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

75 FR 56595 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

.... Program: This meeting will review applications for Art History in America's Historical and Cultural... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

77 FR 41808 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... applications on the subject of Art History for the Fellowships for University Teachers grant program, submitted... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice of meetings...

75 FR 12574 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-16

... applications for Art History in America's Historical and Cultural Organizations Grants Program, submitted to... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

In-Situ Wave Observations in the High Resolution Air-Sea Interaction DRI

DTIC Science & Technology

2008-09-30

Program ( CDIP ) Harvest buoy located in 204 m depth off Point Conception. The initial sea surface is assumed Gaussian and homogeneous, with spectral...of simulated sea surface elevation. Right panels: corresponding observed frequency-directional wave spectra (source: CDIP ). Upper panels: Typical

75 FR 9001 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

77 FR 56236 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

78 FR 39017 - Proposal Review Panel for Materials Research, Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research, Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open. Contact Person: Dr. Chuck Bouldin, Program Director, Materials Research Science and...

78 FR 31978 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as amended), the National Science Foundation..., Centers for Chemical Innovation Program, Division of Chemistry, Room 1055, National Science Foundation...

Radiative, actively cooled panel tests results

NASA Technical Reports Server (NTRS)

Shore, C. P.; Nowak, R. J.; Sharpe, E. L.

1978-01-01

The radiative, actively cooled panel designed to withstand a uniform incident heat flux of 136 kW/sq m to a 444 K surface temperature was evaluated. The test program consisted of preliminary static thermal mechanical loading and aerothermal flow tests. Test results are briefly discussed.

75 FR 43993 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel: Patient Protection...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel: Patient Protection and Affordable Care Act (PPACA), Emerging Infections Program (EIP), Enhancing Epidemiology and Laboratory Capacity...

14 CFR 1259.603 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Responsibilities. 1259.603 Section 1259.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.603 Responsibilities. (a) The Panel shall advise the...

14 CFR 1259.603 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Responsibilities. 1259.603 Section 1259.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.603 Responsibilities. (a) The Panel shall advise the...

77 FR 57162 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

77 FR 14441 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

75 FR 4876 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

77 FR 57161 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

78 FR 40519 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open Contact Person: Dr. Charles Ying, Program Director, Materials Research Science and...

77 FR 14441 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: LIGO Annual Review Site Visit at Hanford Observatory for Physics...: Partially Closed. Contact Person: Thomas Carruthers, Program Director, Division of Physics, National Science...

75 FR 63865 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: Michigan State University Site Visit in Physics (1208). Date and Time... Reidy, Program Director for Elementary Particle Physics, National Science Foundation, 4201 Wilson Blvd...

76 FR 66998 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: LIGO Annual Review Site Visit at Hanford Observatory for Physics...: Partially Closed. Contact Person: Thomas Carruthers, Program Director, Division of Physics, National Science...

75 FR 63865 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: University of Chicago Site Visit in Physics (1208). Date and Time..., Program Director for Elementary Particle Physics, National Science Foundation, 4201 Wilson Blvd...

14 CFR 1259.603 - Responsibilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Responsibilities. 1259.603 Section 1259.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.603 Responsibilities. (a) The Panel shall advise the...

14 CFR 1259.603 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Responsibilities. 1259.603 Section 1259.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NATIONAL SPACE GRANT COLLEGE AND FELLOWSHIP PROGRAM Space Grant Review Panel § 1259.603 Responsibilities. (a) The Panel shall advise the...

75 FR 6729 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... financial assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended... United States History in America's Historical and Cultural Organizations Grants Program, submitted to the...

A Practical Risk Stratification Approach for Implementing a Primary Care Chronic Disease Management Program in an Underserved Community.

PubMed

Xu, Junjun; Williams-Livingston, Arletha; Gaglioti, Anne; McAllister, Calvin; Rust, George

2018-01-01

The use of value metrics is often dependent on payer-initiated health care management incentives. There is a need for practices to define and manage their own patient panels regardless of payer to participate effectively in population health management. A key step is to define a panel of primary care patients with high comorbidity profiles. Our sample included all patients seen in an urban academic family medicine clinic over a two-year period. The simplified risk stratification was built using internal electronic health record and billing system data based on ICD-9 codes. There were 347 patients classified as high-risk out of the 5,364 patient panel. Average age was 59 years (SD 15). Hypertension (90%), hyperlipidemia (62%), and depression (55%) were the most common conditions among high-risk patients. Simplified risk stratification provides a feasible option for our team to understand and respond to the nuances of population health in our underserved community.

Structural tests and development of a laminar flow control wing surface composite chordwise joint

NASA Technical Reports Server (NTRS)

Lineberger, L. B.

1984-01-01

The dramatic increases in fuel costs and the potential for periods of limited fuel availability provided the impetus to explore technologies to reduce transport aircraft fuel consumption. NASA sponsored the Aircraft Energy Efficiency (ACEE) program beginning in 1976 to develop technologies to improve fuel efficiency. The Lockheed-Georgia Company accomplished under NAS1-16235 Laminar-Flow-Control (LFC) Wing Panel Structural Design and Development (WSSD); design, manufacturing, and testing activities. An in-depth preliminary design of the baseline 1993 LFC wing was accomplished. A surface panel using the Lockheed graphite/epoxy integrated LFC wing box structural concept was designed. The concept was shown by analysis to be structurally efficient and cost effective. Critical details of the surface and surface joint was demonstrated by fabricating and testing complex, concept selection specimens. The Lockheed-Georgia Company accomplishments, Development of LFC Wind Surface Composite Structures (WSCS), are documented. Tests were conducted on two CV2 panels to verify the static tension and fatigue strength of LFC wing surface chordwise joints.

Short-Run Effects of Parental Job Loss on Children's Academic Achievement

ERIC Educational Resources Information Center

Stevens, Ann Huff; Schaller, Jessamyn

2011-01-01

We study the relationship between parental job loss and children's academic achievement using data on job loss and grade retention from the 1996, 2001, and 2004 panels of the Survey of Income and Program Participation. We find that a parental job loss increases the probability of children's grade retention by 0.8 percentage points, or around 15%.…

Effects of pheromone and plant volatile release rates and ratios on trapping Anoplophora glabripennis (Coleoptera: Cerambycidae) in China

Treesearch

P.S. Meng; R.T. Trotter; M.A. Keena; T.C. Baker; S. Yan; E.G. Schwartzberg; K. Hoover

2014-01-01

Native to China and Korea, the Asian longhorned beetle, Anoplophora glabripennis (Motschulsky) (Coleoptera: Cerambycidae), is a polyphagous wood-boring pest for which a trapping system would greatly benefit eradication and management programs in both the introduced and native ranges. Over two field seasons, a total of 160 flight intercept panel traps...

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel. Part 2: Space shuttle program. Section 2: Summary of information developed in the Panel's fact-finding activities

NASA Technical Reports Server (NTRS)

1975-01-01

The management areas and the individual elements of the shuttle system were investigated. The basic management or design approach including the most obvious limits or hazards that are significant to crew safety was reviewed. Shuttle program elements that were studied included the orbiter, the space shuttle main engine, the external tank project, solid rocket boosters, and the launch and landing elements.

EOS Directory

NASA Technical Reports Server (NTRS)

1994-01-01

This Earth Observing System (EOS) directory is divided into two main sections: white and yellow pages. The white pages list alphabetically the names and addresses -- including e-mail, phone, and fax when available -- of all individuals involved with EOS, from graduate students to panel members to program management and more. The yellow pages list the names, affiliation, and phone number of participants divided by project management, program management, individual project participants, interdisciplinary investigations (listed alphabetically by PI), the Science Executive Committee, various panels, platforms, working groups, fellowships, and contractors.

CHALLENGES FOR IMPLEMENTING A PTSD PREVENTIVE GENOMIC SEQUENCING PROGRAM IN THE U.S. MILITARY

PubMed Central

Lázaro-Muñoz, Gabriel; Juengst, Eric T.

2015-01-01

There is growing interest in using the quickly developing field of genomics to contribute to military readiness and effectiveness. Specifically, influential military advisory panels have recommended that the U.S. military apply genomics to help treat, prevent, or minimize the risk for post-traumatic stress disorder (PTSD) among service members. This article highlights some important scientific, legal, and ethical challenges regarding the development and deployment of a preventive genomic sequencing (PGS) program to predict the risk of PTSD among military service members. PMID:26401056

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1993-01-01

The Aerospace Safety Advisory Panel (ASAP) provided oversight on the safety aspects of many NASA programs. In addition, ASAP undertook three special studies. At the request of the Administrator, the panel assessed the requirements for an assured crew return vehicle (ACRV) for the space station and reviewed the organization of the safety and mission quality function within NASA. At the behest of Congress, the panel formed an independent, ad hoc working group to examine the safety and reliability of the space shuttle main engine. Section 2 presents findings and recommendations. Section 3 consists of information in support of these findings and recommendations. Appendices A, B, C, and D, respectively, cover the panel membership, the NASA response to the findings and recommendations in the March 1992 report, a chronology of the panel's activities during the reporting period, and the entire ACRV study report.

Calibration of aero-structural reduced order models using full-field experimental measurements

NASA Astrophysics Data System (ADS)

Perez, R.; Bartram, G.; Beberniss, T.; Wiebe, R.; Spottswood, S. M.

2017-03-01

The structural response of hypersonic aircraft panels is a multi-disciplinary problem, where the nonlinear structural dynamics, aerodynamics, and heat transfer models are coupled. A clear understanding of the impact of high-speed flow effects on the structural response, and the potential influence of the structure on the local environment, is needed in order to prevent the design of overly-conservative structures, a common problem in past hypersonic programs. The current work investigates these challenges from a structures perspective. To this end, the first part of this investigation looks at the modeling of the response of a rectangular panel to an external heating source (thermo-structural coupling) where the temperature effect on the structure is obtained from forward looking infrared (FLIR) measurements and the displacement via 3D-digital image correlation (DIC). The second part of the study uses data from a previous series of wind-tunnel experiments, performed to investigate the response of a compliant panel to the effects of high-speed flow, to train a pressure surrogate model. In this case, the panel aero-loading is obtained from fast-response pressure sensitive paint (PSP) measurements, both directly and from the pressure surrogate model. The result of this investigation is the use of full-field experimental measurements to update the structural model and train a computational efficient model of the loading environment. The use of reduced order models, informed by these full-field physical measurements, is a significant step toward the development of accurate simulation models of complex structures that are computationally tractable.

NIH state-of-the-science conference statement: Enhancing use and quality of colorectal cancer screening.

PubMed

Steinwachs, Donald; Allen, Jennifer Dacey; Barlow, William Eric; Duncan, R Paul; Egede, Leonard E; Friedman, Lawrence S; Keating, Nancy L; Kim, Paula; Lave, Judith R; LaVeist, Thomas A; Ness, Roberta B; Optican, Robert J; Virnig, Beth A

2010-02-04

To provide health care providers, patients, and the general public with a responsible assessment of currently available data on enhancing use and quality of colorectal cancer screening. A non-DHHS, nonadvocate 13-member panel representing the fields of cancer surveillance, health services research, community-based research, informed decision-making, access to care, health care policy, health communication, health economics, health disparities, epidemiology, statistics, thoracic radiology, internal medicine, gastroenterology, public health, end-of-life care, and a public representative. In addition, 20 experts from pertinent fields presented data to the panel and conference audience. Presentations by experts and a systematic review of the literature prepared by the RTI International-University of North Carolina Evidence-based Practice Center, through the Agency for Healthcare Research and Quality. Scientific evidence was given precedence over anecdotal experience. The panel drafted its statement based on scientific evidence presented in open forum and on published scientific literature. The draft statement was presented on the final day of the conference and circulated to the audience for comment. The panel released a revised statement later that day at http://consensus.nih.gov. This statement is an independent report of the panel and is not a policy statement of the NIH or the Federal Government. The panel found that despite substantial progress toward higher colorectal cancer screening rates nationally, screening rates fall short of desirable levels. Targeted initiatives to improve screening rates and reduce disparities in underscreened communities and population subgroups could further reduce colorectal cancer morbidity and mortality. This could be achieved by utilizing the full range of screening options and evidence-based interventions for increasing screening rates. With additional investments in quality monitoring, Americans could be assured that all screening achieves high rates of cancer prevention and early detection. To close the gap in screening, this report identifies the following priority areas for implementation and research to enhance the use and quality of colorectal cancer screening: • Eliminate financial barriers to colorectal cancer screening and appropriate follow up. • Widely implement interventions that have proven effective at increasing colorectal cancer screening, including patient reminder systems and one-on-one interactions with providers, educators, or navigators. • Conduct research to assess the effectiveness of tailoring programs to match the characteristics and preferences of target population groups to increase colorectal cancer screening. • Implement systems to ensure appropriate follow-up of positive colorectal cancer screening results. • Develop systems to assure high quality of colorectal cancer screening programs. • Conduct studies to determine the comparative effectiveness of the various colorectal cancer screening methods in usual practice settings.

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

NASA Technical Reports Server (NTRS)

Grosveld, F.; Vanaken, J.

1978-01-01

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Evaluating perceptions of the effectiveness of the community advisory panel model for enhancing service delivery to marginalized populations.

PubMed

Ramsay, Jason T; Smith, Peter; Thompson, Alison; O'Campo, Patricia; Nisenbaum, Rosane; Watson, Priya; Park-Wylie, Laura; Bryant, Toba; Tandon, Reena; Farah, Mohammed

2012-01-01

The objective of this study was to evaluate perceptions of the effectiveness of the community advisory panels (CAPs) at St. Michael's Hospital, in Toronto, Canada. A qualitative design was employed. Participants included hospital staff, patients, Community Advisory Panel chairs, and key informants from community services in the St. Michael's Hospital catchment area. An online survey about awareness of the CAPs and CAP accomplishments; (2) Key informants interviews; and (3) Review of memos and meeting minutes of the CAPs to assess their impact in the hospital and the community. St. Michael's Hospital was the setting of the study. Descriptive statistics were generated for the survey data. Qualitative interview data were coded for major themes. Participants included hospital staff, patients, CAP chairs, and key informants from community services in the St. Michael's Hospital catchment area. Although the CAPs initiated and implemented an array of programs and services at St. Michael's Hospital, the visibility of the CAPs and their service to the hospital and community were very low. Themes that emerged from the semistructured interviews involved the visibility, effectiveness, and role of the CAPs in the hospital. Although the CAPs at St. Michael's Hospital appear to be an effective model for community responsiveness, the visibility of their work in the hospital and community was very low. © 2012 Wiley Periodicals, Inc.

Research Program on Factors Affecting the Brightness of AC Plasma Panels.

DTIC Science & Technology

1983-06-01

representing the second excited electronic con - figuration in neon. In an effort to devise means to improve the brightness and/or efficiency of neon filled...obtained from several panels was found to be very good (Ref. 6), a factor providing important support for the validity of the kinetic modeling pro - cedures...pressure neon Penning mixtures for I conditions typical of plasma panel displays [II]. Their work has pro - vied valuable insight regarding the electrical

77 FR 4583 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

.... Program: This meeting will review applications for Literature, Art History, and Music in Kluge Fellowships... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

76 FR 58048 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

.... Location: Room 415. Program: This meeting will review applications for Art History in Preservation and... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including...

76 FR 59173 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... the Arts and the Humanities Act of 1965, as amended, on the development of humanities programming and content for an upcoming Bridging Cultures Bookshelf project on the subject of Muslim history and cultures...

75 FR 18906 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-13

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including... History and Culture, submitted to the Division of Education Programs at the March 2, 2010 deadline. 2...

76 FR 27671 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

... THE NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... the Arts and the Humanities Act of 1965, as amended, on the development of humanities programming and content for an upcoming Bridging Cultures Bookshelf project on the subject of Muslim history and cultures...

75 FR 57298 - Proposal Review Panel for Physics; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics; Notice of Meeting In accordance... announces the following meeting. Name: University of Notre Dame Site Visit in Physics (1208). Date and Time..., Program Director for Physics Education and Disciplinary Research, National Science Foundation, 4201 Wilson...

75 FR 18240 - Proposal Review Panel for Materials Research Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and.... Type of Meeting: Part-open. Contact Person: Thomas Rieker, Program Director, Materials Research Science...

77 FR 42341 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance... announces the following meeting: Name: ChemMatCARS Site Visit, 2011 Awardees by NSF Division of Chemistry.... Carlos Murillo, Program Director, Division of Chemistry, Room 1055, National Science Foundation, 4201...

The Role of Market Forces in Providing Student Loans.

ERIC Educational Resources Information Center

Burd, Stephen

2000-01-01

Discusses issues addressed by a Congessionally mandated panel to identify and evaluate options for infusing market forces into the student loan program. Notes possible advantages. Conflicting views of the panel's student representatives, college administrators, and lenders are reported concerning reductions of lenders' profits, removal of…

77 FR 19362 - Proposal Review Panel for Materials Research, Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research, Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open. Contact Person: Dr. Sean L. Jones, Program Director, Materials Research Science and...

78 FR 4464 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463 as amended), the National Science..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

77 FR 59198 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-26

....gov . Name of Committee: Center for Scientific Review Special Emphasis Panel; Drug Discovery for the... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Center for Scientific Review... personal privacy. Name of Committee: Center for Scientific Review Special Emphasis Panel; Program Projects...

75 FR 71787 - Occupational Information Development Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... recommendations will relate to our disability programs in the following areas: medical and vocational analysis of... medical-vocational adjudication policies and processes. Agenda: The Panel will meet on Wednesday, December... business. Those interested in providing testimony in person at the meeting or via teleconference should...

Industry Panel Curriculum Project. Final Report.

ERIC Educational Resources Information Center

Kenneke, Larry J.

This project was conducted to develop and disseminate updated curriculum guides for nine selected cluster areas of vocational education programs in Oregon; only five were developed. The updates were based on recommendations made by industry review panels (IRPs). Specialists from the Oregon Department of Education and Oregon State University…

75 FR 6675 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Human...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

..., Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Human Immunodeficiency Virus (HIV... evaluation of applications received in response to ``HIV Prevention Projects for Community Based..., Extramural Programs, National Center for HIV, Hepatitis and Sexually Transmitted Diseases Prevention, 1600...

15 CFR 290.8 - Reviews of centers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... criteria set out below. There will be regular management interaction with NIST and the other Centers for... involved Center, and Federal officials. An official of NIST shall chair the panel. Each Merit Review Panel...

15 CFR 290.8 - Reviews of centers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... criteria set out below. There will be regular management interaction with NIST and the other Centers for... involved Center, and Federal officials. An official of NIST shall chair the panel. Each Merit Review Panel...

15 CFR 290.8 - Reviews of centers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... criteria set out below. There will be regular management interaction with NIST and the other Centers for... involved Center, and Federal officials. An official of NIST shall chair the panel. Each Merit Review Panel...

76 FR 19995 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Funding...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

..., Extramural Research Program Office, National Center for Chronic Disease Prevention and Health Promotion, CDC... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Funding Opportunity Announcement...

Measurements of Ionospheric Density, Temperature, and Spacecraft Charging in a Space Weather Constellation

NASA Astrophysics Data System (ADS)

Balthazor, R. L.; McHarg, M. G.; Wilson, G.

2016-12-01

The Integrated Miniaturized Electrostatic Analyzer (IMESA) is a space weather sensor developed by the United States Air Force Academy and integrated and flown by the DoD's Space Test Program. IMESA records plasma spectrograms from which can be derived plasma density, temperature, and spacecraft frame charging. Results from IMESA currently orbiting on STPSat-3 are presented, showing frame charging effects dependent on a complex function of the number of solar panel cell strings switched in, solar panel current, and plasma density. IMESA will fly on four more satellites launching in the next two calendar years, enabling an undergraduate DoD space weather constellation in Low Earth Orbit that has the ability to significantly improve space weather forecasting capabilities using assimilative forecast models.

Parabolic Dish Concentrator (PDC-1)

NASA Technical Reports Server (NTRS)

Dennison, E. W.; Argoud, M. J.

1984-01-01

The design, construction, and installation of the Parabolic Dish Concentrator, Type 1 (PDC-1) has been one of the most significant JPL concentrator projects because of the knowledge gained about this type of concentrator and the development of design, testing, and analysis procedures which are applicable to all solar concentrator projects. The need for these procedures was more clearly understood during the testing period which started with the prototype panel evaluation and ended with the performance characterization of the completed concentrator. For each phase of the test program, practical test procedures were required and these procedures defined the mathematical analysis which was essential for successful concentrator development. The concentrator performance appears to be limited only by the distortions resulting from thermal gradients through the reflecting panels. Simple optical testing can be extremely effective, but comprehensive mechanical and optical analysis is essential for cost effective solar concentrator development.

Committee to evaluate Sandia`s risk expertise: Final report. Volume 1: Presentations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dudley, E.C.

1998-05-01

On July 1--2, 1997, Sandia National Laboratories hosted the External Committee to Evaluate Sandia`s Risk Expertise. Under the auspices of SIISRS (Sandia`s International Institute for Systematic Risk Studies), Sandia assembled a blue-ribbon panel of experts in the field of risk management to assess their risk programs labs-wide. Panelists were chosen not only for their own expertise, but also for their ability to add balance to the panel as a whole. Presentations were made to the committee on the risk activities at Sandia. In addition, a tour of Sandia`s research and development programs in support of the US Nuclear Regulatory Commissionmore » was arranged. The panel attended a poster session featuring eight presentations and demonstrations for selected projects. Overviews and viewgraphs from the presentations are included in Volume 1 of this report. Presentations are related to weapons, nuclear power plants, transportation systems, architectural surety, environmental programs, and information systems.« less

Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pschirer, James; Burgess, Joshua; Schrecengost, Robert

Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE), has completed the project “Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development” under U.S. Department of Energy (DOE) Award Number DE-FE0024076. This project was part of DOE’s Novel Crosscutting Research and Development to Support Advanced Energy Systems program. AUSC Tube Membrane Panel Development was a two and one half year project to develop and verify the manufacturability and serviceability of welded tube membrane panels made from high performance materials suitable for the AUSC steam cycles, defined as high pressure steam turbine inlet conditions of 700-760°C (1292-1400°F) and 24.5-35MPamore » (3500-5000psi). The difficulty of this challenge lies in the fact that the membrane-welded construction imposes demands on the materials that are unlike any that exist in other parts of the boiler. Tube membrane panels have been designed, fabricated, and installed in boilers for over 50 years with relatively favorable experience when fabricated from carbon and Cr-Mo low alloy steels. The AUSC steam cycle requires membrane tube panels fabricated from materials that have not been used in a weldment with metal temperatures in the range of 582-610°C (1080-1130°F). Fabrication materials chosen for the tubing were Grade 92 and HR6W. Grade 92 is a creep strength enhanced ferritic Cr-Mo alloy and HR6W is a high nickel alloy. Once the materials were chosen, GE performed the engineering design of the panels, prepared shop manufacturing drawings, and developed manufacturing and inspection plans. After the materials were purchased, GE manufactured and inspected the tube membrane panels, determined if post fabrication heat treatment of the tube membrane panels was needed, performed pre- and post-weld heat treatment on the Grade 92 panels, conducted final nondestructive inspection of any heat treated tube membrane panels, conducted destructive inspection of the completed tube membrane panels,and performed simulated shop repairs on the panel fabricated using Grade 92. GE executed the program as the prime contractor under the direction of Principal Investigator Mr. James Pschirer. Other participants in this project included GE Boiler Engineering, GE Chattanooga Manufacturing, GE Materials Technology Center, GE Rocky Mountain Service Center, and a Technical Consultant from Electric Power Research Institute (EPRI).« less

Some reflections on the role of the Scientific Advisory Panel to the Marshall Islands nationwide radiological study.

PubMed

McEwan, A C; Simon, S L; Baverstock, K F; Trott, K R; Sankaranarayanan, K; Paretzke, H G

1997-07-01

As a consequence of the U.S. Atomic Weapons Testing Program in the Trust Territory of the Pacific, now the Republic of the Marshall Islands, numerous scientists have advised the Marshallese on matters of radiation and radioactive contamination. Some of the previous advice has appeared to vary or conflict resulting in consequent uncertainty for the people. In a new initiative in 1989, the RMI Government engaged a five member multi-disciplinary Scientific Advisory Panel to oversee the assessment of, and to advise on, the radiological status of the entire nation. The formation of the Panel was accompanied by the establishment of a Resident Scientist position, and ultimately a small scientific team and laboratory on Majuro. The nationwide radiological study was conducted using ground survey methods over the period 1990-1994. Tasks undertaken by the Panel included formulating reasonable objectives for the study and attempting to establish effective communication and understanding of issues with political leaders and RMI Government agencies and people, as well as advising on and monitoring the scientific integrity of the study itself. The attempt was also made to initiate investigations to address matters of concern that emerged. The problem was faced of providing not only technical guidance on radioactivity and radiation measurements, but also explaining the significance of measured values and concepts, such as risk and probability of health effects to a diverse but nontechnical audience, generally across cultural and language barriers. The experience of the Panel in providing advice and guidance to the Republic of the Marshall Islands, while unique in many ways, parallels the difficulties experienced elsewhere in communicating information about risks from radiation exposure.

How to Prepare for a Joint Dissemination Review Panel Meeting.

ERIC Educational Resources Information Center

Schmitt, Marshall L.; Rubak, Seymour S.

This guide defines the objectives and procedures of the United States Department of Education's Joint Dissemination Review Panel (JDRP) and the National Diffusion Network (NDN). The authors discuss the JDRP's methods of identifying successful educational programs and informing other schools nationwide about them. The major questions asked about…

75 FR 22102 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; Survey of.... SUPPLEMENTARY INFORMATION: I. Abstract The Census Bureau conducts the SIPP, which is a household-based survey designed as a continuous series of national panels. New panels are introduced every few years with each...

75 FR 3200 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; Survey of.... SUPPLEMENTARY INFORMATION: I. Abstract The Census Bureau conducts the SIPP, which is a household-based survey designed as a continuous series of national panels. New panels are introduced every few years with each...

75 FR 57440 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; Survey of.... SUPPLEMENTARY INFORMATION: I. Abstract The Census Bureau conducts the SIPP, which is a household-based survey designed as a continuous series of national panels. New panels are introduced every few years with each...

78 FR 42554 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-16

... University Teachers grant program on the subject of Art History, submitted to the Division of Research... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National... Foundation on the Arts and Humanities Act of 1965 (20 U.S.C. 951-960, as amended). DATES: See SUPPLEMENTARY...

77 FR 37073 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

... subject of Art History submitted to the Fellowships for University Teachers grant program in the Division... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National... Foundation on the Arts and Humanities Act of 1965 (20 U.S.C. 951-960, as amended). DATES: See SUPPLEMENTARY...

76 FR 29771 - National Institute of Diabetes and Digestive and Kidney Diseases; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-23

... Diabetes and Digestive and Kidney Diseases; Notice of Closed Meetings Pursuant to section 10(d) of the... Diabetes and Digestive and Kidney Diseases Special Emphasis Panel, NIDDK Interconnectivity Network. Date... and Digestive and Kidney Diseases Special Emphasis Panel, Digestive Diseases Program Projects. Date...

23 CFR 260.109 - Selection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Selection. 260.109 Section 260.109 Highways FEDERAL... PROGRAMS Fellowship and Scholarship Grants § 260.109 Selection. (a) Candidates shall be rated by a selection panel appointed by the Director of the NHI. Members of the panel shall represent the highway...

Citrus Research Board-sponsored review of the University of California Riverside citrus breeding

USDA-ARS?s Scientific Manuscript database

In October 2015 the Citrus Research Board (CRB) assembled a panel of experts to review the Citrus Research Board-sponsored Citrus Research and Genetics Programs at University of California Riverside (UCR). The panel consisted of: Gennaro Fazio, USDA/ARS, Geneva, NY; Maria Angeles Forner-Giner, Insti...

77 FR 68153 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-15

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National... Foundation on the Arts and Humanities Act of 1965 (20 U.S.C. 951-960, as amended). DATES: See SUPPLEMENTARY... Reference Resources grant program on the subject of Music and Performing Arts, submitted to the Division of...

76 FR 63664 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The... assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended, including..., 2011. Time: 9 a.m. to 5 p.m. Location: Room 421. Program: This meeting will review applications for Art...

76 FR 12996 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance... Awardees by NSF Division of Chemistry (CHE), 1191. Dates and Times: March 31, 2011; 8 a.m.-5:30 p.m. April... Director, Chemistry Centers Program, Division of Chemistry, Room 1055, National Science Foundation, 4201...

76 FR 6499 - Proposal Review Panel for Chemistry; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Chemistry; Notice of Meeting In accordance... Awardees by NSF Division of Chemistry (1191). Dates and Times: February 17, 2011; 8 a.m.-6 p.m. February 18... Director, Chemistry Centers Program, Division of Chemistry, Room 1055, National Science Foundation, 4201...

77 FR 38837 - Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

... weights, price-measurement proxies, and productivity adjustment. This meeting is open to the public in... productivity adjustment. For more information on the Panel, see the October 7, 2011 Federal Register (76 FR... recommendations regarding the MEI's inputs, input weights, price- measurement proxies, and the productivity...

120. INERTIAL MEASUREMENT UNIT (IMU) NITROGEN PURGE REGULATOR PANEL FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

120. INERTIAL MEASUREMENT UNIT (IMU) NITROGEN PURGE REGULATOR PANEL FOR DEFENSE METEOROLOGICAL SYSTEM PROGRAM (DMSP) PAYLOADS IN SOUTHWEST CORNER OF VEHICLE MECHANICAL SYSTEMS ROOM (111), LSB (BLDG. 770) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

78 FR 59040 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

..., [email protected] . Name of Committee: Molecular, Cellular and Developmental Neuroscience Integrated... Scientific Review Special Emphasis Panel, RFA Panel: Molecular Probes. Date: October 18, 2013. Time: 8:00 a.m... Assistance Program Nos. 93.306, Comparative Medicine; 93.333, Clinical Research, 93.306, 93.333, 93.337, 93...

75 FR 7281 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Translating...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Translating Research Into Action... of the Director, Extramural Research Program Office, 4770 Buford Highway, NE., Mailstop K-92, Atlanta...

Workplace Literacy: Business, Government, and Academic Perspectives. Panel Discussion.

ERIC Educational Resources Information Center

Malicky, Grace, Comp.; Dieleman, Carolyn; Campbell, Lloyd; Wong, Bill; Krahn, Harvey

1998-01-01

Presents highlights of a panel discussion on workplace literacy at the Literacy in the 21st Century Research Conference (Edmonton, Alberta, October 1997). Participants from business, government, and university discussed Syncrude Canada's Workplace Literacy Program, implications of the International Adult Literacy Survey for the labor market, and…

76 FR 10910 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-28

... Committee: Center for Scientific Review Special Emphasis Panel; RFA-HD-11-101: Sleep and Social Environment... Emphasis Panel; RFA-HD-11-102: Sleep and Social Environment: Basic Biopsychosocial Processes (R21). Date... . (Catalogue of Federal Domestic Assistance Program Nos. 93.306, Comparative Medicine; 93.333, Clinical...

7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGENCY, DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL System for Delivery... of Agriculture regulations, 7 CFR, parts 3016 and 3017, as appropriate. (4) Drug-free work place. The State must provide for a drug-free workplace in accordance with the requirements of FmHA Instruction...

7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGENCY, DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL System for Delivery... of Agriculture regulations, 7 CFR, parts 3016 and 3017, as appropriate. (4) Drug-free work place. The State must provide for a drug-free workplace in accordance with the requirements of FmHA Instruction...