76 FR 67148 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including stumpage subsidies...

78 FR 24724 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including stumpage subsidies...

Sawmilling practices for hardwoods

Treesearch

John. Dramm

2013-01-01

The Sawmill Improvement Program (SIP) provides guidance to improve the bottom line of a sawmill both by recovering more lumber from a log and by using simplified procedures to produce more grade lumber. Lessons learned from SIP have led to improved yields of grade lumber through improved log manufacturing, reducing sawing variation by using thinner kerf saws and better...

Regional softwood sawmill processing variables as influenced by productive capacity

Treesearch

P. H. Steele; F. G. Wagner; K. E. Skog

The relationship between annual softwood sawmill production and lumber processing variables was examined using data from Sawmill Improvement Program (SIP) studies of 650 softwood mills. The variables were lumber recovery factor (LRF); headrig and resaw kerf width; total sawing variation, rough green size, and oversizing-undersizing for 4/4 and 8/4 lumber; planer...

78 FR 65970 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries... Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including..., International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW...

Lumber grade recovery from young ponderosa pine.

Treesearch

James E. Sowder

1953-01-01

Young ponderosa pine produces a good grade of common lumber, and close-grown trees produce better grades than those which were open-grown. This was shown by a study at the Pringle Falls Experimental Forest near Lapine in central Oregon.

ALPS yield optimization cutting program

Treesearch

P. Klinkhachorn; J.P. Franklin; Charles W. McMillin; H.A. Huber

1989-01-01

This paper reports ongoing work on a series of computer programs developed to automate hardwood lumber processing in a furniture roughmill. The program computes the placement of cuttings on lumber, based on a description of each board in terms of shape and defect location, and a cutting bill. These results are suitable for use with a high-power laser to cut the parts...

7 CFR 1217.60 - Programs, plans, and projects.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and advertising designed to: (1) Maintain, develop, expand and grow markets for softwood lumber; (2... strength, safety, environmental and sustainable benefits and technical applications of softwood lumber; and...

7 CFR 1217.60 - Programs, plans, and projects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and advertising designed to: (1) Maintain, develop, expand and grow markets for softwood lumber; (2... strength, safety, environmental and sustainable benefits and technical applications of softwood lumber; and...

7 CFR 1217.60 - Programs, plans, and projects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and advertising designed to: (1) Maintain, develop, expand and grow markets for softwood lumber; (2... strength, safety, environmental and sustainable benefits and technical applications of softwood lumber; and...

Harem: Hardwood lumber remanufacturing program for maxmizing value based on size, grade and current market prices

Treesearch

C.J. Schwehm; P. Klinkhachorn; Charles W. McMillin; Henry A. Huber

1990-01-01

This paper describes an expert system computer program which will determine the optimum way to edge and trim a hardwood board so as to yield the highest dollar value based on the grade, size of each board, and current market prices. The program uses the Automated Hardwood Lumber Grading Program written by Klinkhachorn, et al. for determining the grade of each board...

Investigating the linearity assumption between lumber grade mix and yield using design of experiments (DOE)

Treesearch

Xiaoqiu Zuo; Urs Buehlmann; R. Edward Thomas

2004-01-01

Solving the least-cost lumber grade mix problem allows dimension mills to minimize the cost of dimension part production. This problem, due to its economic importance, has attracted much attention from researchers and industry in the past. Most solutions used linear programming models and assumed that a simple linear relationship existed between lumber grade mix and...

Method for adjusting warp measurements to a different board dimension

Treesearch

William T. Simpson; John R. Shelly

2000-01-01

Warp in lumber is a common problem that occurs while lumber is being dried. In research or other testing programs, it is sometimes necessary to compare warp of different species or warp caused by different process variables. If lumber dimensions are not the same, then direct comparisons are not possible, and adjusting warp to a common dimension would be desirable so...

Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image

Treesearch

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Performance of a Press-Lam bridge : a 5-year load-testing and monitoring program

Treesearch

D. S. Gromala; R. C. Moody; M. M. Sprinkel

1985-01-01

This paper summarizes the results of load tests on an experimental highway bridge erected and put into service on the George Washington National Forest in Virginia in 1977. The bridge, made entirely of Press-Lam, a laminated veneer lumber (LVL) product, was load tested 1 month, 1 year, and 5 years after erection. The bridge continues to perform quite well and,...

Solar Kilns: Feasibility of Utilizing Solar Energy for Drying Lumber in Developing Countries,

DTIC Science & Technology

1977-01-01

Design. .. ............. ... 52 Direct ( Greenhouse ) Design .. .. ............ ... 57 Literature Cited and Partial Bibliography of Solar Lumber Drying...experimental performance of a greenhouse -type solar kiln in Puerto Rico. (Chudnoff et al., 1966). 36"J. Table 9.--Comparison of experimental and calculated...at one dryer orientation (long axis north-south) from 30 percent to 10 percent moisture content. 49 Table 15.-- Greenhouse -type solar kiln capacity

Data bank for short-length red oak lumber

Treesearch

Janice K. Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1994-01-01

This data bank for short-length lumber (less than 8 feet long) contains information on board outlines and defect size and quality for 426 414-inch-thick red oak boards. The Selects, 1 Common, 2A Common, and 3A Common grades are represented in the data bank. The data bank provides the kind of detailed lumber description that is required as input by computer programs...

Opportunities for expanded and higher value utilization of No. 3A Common hardwood lumber

Treesearch

Brian P. Shepley; Jan Wiedenbeck; Robert L. Smith

2004-01-01

The percentage of low-grade material composing the annual hardwood lumber production in the United States is on the rise. As a result, finding markets for low-grade and low-value lumber has been identified as a top priority by researchers and industry associations. This research used the ROMI-RIP and ROMI-CROSS simulation programs to determine specific conditions that...

A comparison of two rough mill cutting models

Treesearch

Steven Ruddell; Henry Huber; Powsiri Klinkhachorn

1990-01-01

A comparison of lumber yield using the Automated Lumber Processing System (ALPS) Cutting Program and the Optimal Furniture Cutting Program (OFCP) was conducted on eight cutting bills. No.1 Common grade hard maple data files were compiled using a board database collected and used by the USDA Forest Service's Forest Products Laboratory to develop standard hardwood...

An introduction to UGRS: the ultimate grading and remanufacturing system

Treesearch

John Moody; Charles J. Gatchell; Elizabeth S. Walker; Powsiri Klinkhachorn

1998-01-01

The Ultimate Grading and Remanufactming System (UGRS) is an advanced computer program for grading and remanufacturing lumber. It is an interactive program that will both grade lumber according to NHLA rules and remanufacture it for maximum value. UGRS is written to run under Microsoft Windows 3.0 or later updates and provides a sophisticated graphical user interface....

Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

Treesearch

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Alaska's lumber-drying industry—impacts from a federal grant program.

Treesearch

David L. Nicholls; Allen M. Brackley; Thomas D. Rojas

2006-01-01

A survey determined that installed dry kiln capacity in Alaska more than doubled to an estimated 220 thousand board feet (mbf) within 4 years (2000-2004). This increased ability to produce dry lumber and value-added products resulted from industry efforts to obtain federal funding to support a dry kiln grant program. This report reviews grantees' progress in...

TRSys: A hardwood lumber grading training and remanufacturing system

Treesearch

P. Klinkhachorn; R. Kothari; R. Annavajjhala; Charles W. McMillin

1994-01-01

The Training and Remanufacturing System (TRSys) is a new training tool for teaching both hardwood lumber grading and remanufacturing of lower grade boards into smaller boards of higher total value. TRSys is based on the HaLT2, ReGS, and enhanced HaRem computer programs. The most important feature of this new program is its ablilty to evaluate remanufacturing beyond...

TRSys: a hardwood lumber grading training and remanufacturing system

Treesearch

P. Klinkhachorn; R. Kotharl; R. annavajjhala; Charles W. McMilling

1994-01-01

The training and remanufacturing system( TRsys) is a new training tool for teaching both hardwood lumber and grading and remanufacturing of lower grade boards into smaller boards of higher total value. TRSys is based on HaLT2. REGS, and enhanced HARem computer programs. The mosti mportant feature of this new program is its ability to evaluate remanufacturing beyond...

Computer programs for adjusting the mechanical properties of 2-inch dimension lumber for changes in moisture content

Treesearch

James W. Evans; Jane K. Evans; David W. Green

1990-01-01

This paper presents computer programs for adjusting the mechanical properties of 2-in. dimension lumber for changes in moisture content. Mechanical properties adjusted are modulus of rupture, ultimate tensile stress parallel to the grain, ultimate compressive stress parallel to the gain, and flexural modulus of elasticity. The models are valid for moisture contents...

Within-grade quality differences for 1 and 2A common lumber affect processsing and yields when gang-ripping red oak lumber

Treesearch

Charles J. Gatchell; R. Edward Thomas; R. Edward Thomas

1997-01-01

Using a new computer grading program (UGRS), 1 and 2A Common lumber was sorted based on the percentage of board surface measure found in the maximum allowable number of grading cuttings. For 1 Common, 46.0 percent of 921 boards had percentages in the FAS range (83-1/3% and above). For 2A Common, 54.7 percent of 825 boards had percentages in the 1 Common range. When...

Optimizing an Experimental System for Assessing the Amounts and Forms of Copper Released into Aquatic Systems from Commercially Available Liquid and Micronized Pressure Treated Lumber

EPA Science Inventory

The fate and effects of pristine engineered metal nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of metal ENMs from consumer goods, especially lumber which has been treated with micronized coppe...

Furniture rough mill costs evaluated by computer simulation

Treesearch

R. Bruce Anderson

1983-01-01

A crosscut-first furniture rough mill was simulated to evaluate processing and raw material costs on an individual part basis. Distributions representing the real-world characteristics of lumber, equipment feed speeds, and processing requirements are programed into the simulation. Costs of parts from a specific cutting bill are given, and effects of lumber input costs...

PP prune users guide.

Treesearch

N.A. Bolon; R.D. Fight; J.M. Cahill

1992-01-01

The PP PRUNE program allows users to conduct a financial analysis of pruning ponderosa pine (Pinus ponderosa Dougl. ex Laws.). The increase in product value and rate of return from pruning the butt 16.5-foot log can be estimated. Lumber recovery information is based on actual mill experience with pruned and unpruned logs. Users supply lumber prices...

Marketing Hardwoods to Furniture Producers

Treesearch

Steven A. Sinclair; Robert J. Bush; Philip A. Araman

1989-01-01

This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

SOLVE The performance analyst for hardwood sawmills

Treesearch

Jeff Palmer; Jan Wiedenbeck; Elizabeth Porterfield

2009-01-01

Presents the users manual and CD-ROM for SOLVE, a computer program that helps sawmill managers improve efficiency and solve problems commonly found in hardwood sawmills. SOLVE provides information on key operational factors including log size distribution, lumber grade yields, lumber recovery factor and overrun, and break-even log costs. (Microsoft Windows? Edition)...

Performance of a rigid and a flexible adhesive in lumber joints subjected to moisture content changes

Treesearch

G. P. Krueger; R. F. Blomquist

1964-01-01

Experimental work was undertaken to investigate the extent and magnitude of deterioration that can occur in typical plywood-to-lumber glue joints subjected to stresses resulting from changes in the moisture content of the wood, and to compare the performance of a somewhat flexible or deformable adhesive to that of a rigid adhesive in these joints. Results showed that...

OPTIGRAMI V2 user's guide

Treesearch

Penny S. Lawson; R. Edward Thomas; Elizabeth S Walker

1996-01-01

OPTIGRAMI V2 is a computer program available for IBM persaonl computer with 80286 and higher processors. OPTIGRAMI V2 determines the least-cost lumber grade mix required to produce a given cutting order for clear parts from rough lumber of known grades in a crosscut-first rough mill operation. It is a user-friendly integrated application that includes optimization...

West Virginia yellow-poplar lumber defect database

Treesearch

Lawrence E. Osborn; Charles J. Gatchell; Curt C. Hassler; Curt C. Hassler

1992-01-01

Describes the data collection methods and the format of the new West Virginia yellow-poplar lumber defect database that was developed for use with computer simulation programs. The database contains descriptions of 627 boards, totaling approximately 3,800 board. feet, collected in West Virginia in grades FAS, FASlF, No. 1 Common, No. 2A Common, and No. 2B Common. The...

Lumber grade recovery from old-growth Douglas-fir at a northwestern Oregon sawmill.

Treesearch

E.H. Clarke

1960-01-01

A study was begun in July 1957 to supplement available data on lumber recovery from old-growth Douglas-fir (Pseudotsuga menziesii) saw logs. This study is part of a continuing program of the Pacific Northwest Forest and Range Experiment Station to develop grade-yield recovery figures for primary products of timber stands in Oregon and Washington....

User's guide to UGRS: the Ultimate Grading and Remanufacturing System (version 5.0).

Treesearch

John Moody; Charles J. Gatchell; Elizabeth S. Walker; Powsiri Klinkhachorn

1998-01-01

The Ultimate Grading and Remanufacturing System (UGRS) is the latest generation of advanced computer programs for lumber grading. It is designed to be a training and research tool that allows grading of lumber according to 1998 NHLA rules and remanufacturing for maximum dollar value. A 32-bit application that runs under all Microsoft Windows operating systems, UGRS...

A Machine Vision System for Automatically Grading Hardwood Lumber - (Proceedings)

Treesearch

Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas H. Drayer; Joe G. Tront; Philip A. Araman; Robert L. Brisbon

1990-01-01

Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

Effect of drilled holes on the bending strength of large dimension Douglas-fir lumber

Treesearch

R.H. Falk; D. DeVisser; G.R. Plume; K.J. Fridley

2003-01-01

In this study, experimental bending tests were performed on nominal 4-by 8-inch (actual 89-mm by 191-mm)lumber members to determine how a notch and holes drilled in the wide face affect edge wise bending strength. Holes were drilled at the midspan in three locations relative to the edge. The results appear to justify an allowable hole one-half the allowable knot size...

A Machine Vision System for Automatically Grading Hardwood Lumber - (Industrial Metrology)

Treesearch

Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas T. Drayer; Philip A. Araman; Robert L. Brisbon

1992-01-01

Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...

Housing and Wood Products Assessment.

DTIC Science & Technology

1982-12-10

1981 to a peak of of floor area, the North Central almost 3 million in 1972 when region 1,670 square feet, the government subsidy programs were South...other masonry alterations. lumber by plywood. Lumber has Interior decorative panel already been effectively elimina- products are also used widely in...possible savings in walls . already been effectively elimi- is 25 percent and 40 percent on nated in these markets and future roofs. Wood joist floor

Career Oriented Mathematics, Teacher's Manual. [Includes Scale; Apprenticeship: Learning to be a Cement Mason; Textiles; Being Self-Employed: Harvesting and Sale of Pulpwood; and Lumber Yard Employee.

ERIC Educational Resources Information Center

Mahaffey, Michael L.; McKillip, William D.

This manual is designed for teachers using units in the Career Oriented Mathematics Program titled: (1) Scale, (2) Apprenticeship: Learning to be a Cement Mason, (3) Textiles, (4) Being Self-Employed: Harvesting and Sale of Pulpwood, and (5) Lumber Yard Employee. Lesson plans, masters for dittos and transparencies, and problem solutions are…

Procedures for developing allowable properties for a single species under ASTM D1990 and computer programs useful for the calculations

Treesearch

James W. Evans; David E. Kretschmann; Victoria L. Herian; David W. Green

2001-01-01

ASTM D1990, “Establishing Allowable Properties for Visually Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens,” is the consensus standard used to make submissions of allowable properties for many U.S., Canadian, and foreign species to the Board of Review of the American Lumber Standards Committee. Recently, it has become apparent how difficult it is to...

78 FR 15053 - Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

...,372B] Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington; Simpson Lumber Company, LLC, Longview, Washington; Notice of Revised Determination on Reconsideration On... Reconsideration for the workers and former workers of Simpson Lumber Company, LLC, Shelton, Washington (TA-W-81...

The determinants of hardwood lumber price

Treesearch

William G. Luppold; Jennifer M. Jacobsen; Jennifer M. Jacobsen

1985-01-01

Econometric equations were estimated to determine the effects of domestic foreign hardwood lumber demands on oak and hardwood lumber prices. Oak price seemed to be more sensitive to changes in exports than overall hardwood lumber price. However, the main determinants of hardwood lumber and oak lumber prices were found to be domestic demand and millstock levels.

Deception Creek Experimental Forest

Treesearch

Theresa B. Jain; Russell T. Graham

1996-01-01

Deception Creek Experimental Forest is in one of the most productive forests in the Rocky Mountains. When the forest was established in 1933, large, old-age western white pine (Pinus monticola) were important for producing lumber products. The forest, located in the Coeur d'Alene Mountains, is in the heart of the western white pine forest type. Therefore, research...

Deception Creek Experimental Forest (Idaho)

Treesearch

Russell T. Graham; Theresa B. Jain

2004-01-01

Deception Creek Experimental Forest is located in one of the most productive forests of the Rocky Mountains. When the forest was established in 1933, large, old western white pines were important for producing lumber products, matches, and toothpicks. Deception Creek is located in the heart of the western white pine forest type, allowing researchers to focus on the...

Shear design of wood beams : state of the art

Treesearch

Lawrence A. Soltis; Terry D. Gerhardt

1988-01-01

Current shear design technology in the United States for lumber or glued- laminated beams is confusing. This report summarizes shear stress and strength research including both analytical and experimental approaches. Both checked and unchecked beams are included. The analytical work has been experimentally verified for only limited load conditions and span-to- depth...

Hardwood log grades and lumber grade yields for factory lumber logs

Treesearch

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

Lumber Cost Minimization through Optimum Grade-Mix Selection

Treesearch

Xiaoqiu Zuo; Urs Buehlmann; R. Edward Thomas; R. Edward Thomas

2003-01-01

Rough mills process kiln-dried lumber into components for the furniture and wood products industries, Lumber is a significant portion of total rough mill costs and lumber quality can have a serious impact on mill productivity. Lower quality lumber is less expensive yet is harder to process. Higher quality lumber is more expensive yet easier to process. The problem of...

Form and toxicity of copper released into marine systems from ...

EPA Pesticide Factsheets

The fate and effects of pristine engineered nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of ENMs from consumer goods, especially lumber that has been treated with micronized copper. Micronized copper solutions contain copper complexes predominately in the 10-700 nm size range, and are used in lumber to prevent microbial degradation and fouling. In this work, the goal was to determine the rate, concentration, and form of copper released from commercially available pressure treated lumber samples (blocks and sawdust) exposed to an aqueous system. Lumber tested included Southern Yellow Pine (SYP) treated with micronized copper azole (MCA) at 0.96 and 2.4 Kg/m3, alkaline copper quaternary (ACQ) at 0.30 and 9.6 Kg/m3, and chromated copper arsenate (CCA) at 40 Kg/m3. Of the different chemical treatments, only MCA included nano- and micro-sized copper complexes. The experimental system included wood cubes cut from the outer 2 cm surface of the lumber or the equivalent mass (4 g) of sawdust submerged in 250 mL of media (0, 1, 10, and 30 ppt filtered natural seawater) in polyethylene bottles, and mixed on a shaker table at 120 rpm. Water samples were taken at 8 hours, and on days 1, 2, 7, 14, and 28 for the blocks and days 1, 2, 3, 7, 17, and 28 for the sawdust. Subsamples included unfiltered water (defined as 0.45 µm - filtered water for the sawdust), and water filtered through a 0.

SOLVE: a computer program for determining the maximum value of hardwood sawlogs

Treesearch

Edward L. Adams; Edward L. Adams

1972-01-01

This paper presents the SOLVE system in detail as an aid to users who might want to make changes in the program. These changes might include: (1) adapting the program to a softwood sawmill; (2) consideration of products other than chips, lumber, and sawed timber; and (3) adapting the program to new data and procedures.

Trends in lumber processing in the Western United States. Part II: Overrun and lumber recovery factors.

Treesearch

Charles E. Keegan; Todd A. Morgan; Keith A. Blatner; Jean M. Daniels

2010-01-01

This article describes trends in three measures of lumber recovery for sawmills in the western United States: lumber overrun (LO), lumber recovery factor (LRF), and cubic lumber recovery (CLR). All states and regions showed increased LO during the last three decades. Oregon and Montana had the highest LO at 107 and 100 percent, respectively. Alaska had the lowest LO at...

Markets and market forces for lumber

Treesearch

Matt Bumgardner; Steven Johnson; William Luppold; Frances Maplesden; Ed. Pepke

2014-01-01

Although lumber is ubiquitous on the international stage, not all lumber is similar or interchangeable in properties, applications, and in the production of potential downstream value-added or secondary wood products. As such, this chapter is divided into the three broadest generally recognized categories of lumber. Section 3.1 focuses on softwood lumber that is mainly...

An assessment of the industrial markets for softwood clearwood lumber.

Treesearch

Ivan L. Eastin; Christine L. Lane; Roger D. Fight; Jamie Barbour

1998-01-01

The purpose of this project was to assess market opportunities for second growth clearwood lumber by identifying industry segments that currently utilize clearwood lumber and determining whether alternative markets will continue to exist for clearwood lumber produced from intensively managed forests in the Pacific Northwest. A survey of industrial lumber...

US hardwood lumber consumption and international trade from 1991 to 2014

Treesearch

William G. Luppold; Matt Bumgardner

2016-01-01

Apparent US hardwood lumber consumption (developed from production, import, and export data) was contrasted with estimated consumption based on employment data and lumber utilization coefficients. The two methods of measuring domestic consumption provided similar results, but the use of employment data allowed for a comparison of appearance lumber vs industrial lumber...

Commercial lumber

Treesearch

Kent A. McDonald; David E. Kretschmann

1999-01-01

In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types, and in various commercial establishments, both wholesale and retail. Most commercial lumber is graded by standardized rules that make purchasing more or less uniform throughout the country...

Air drying of lumber.

Treesearch

1999-01-01

This report describes how lumber can be air-dried most effectively under outdoor conditions and illustrates the principles and procedures of air-drying lumber that were developed through field investigations and observations of industrial practices. Particular emphasis is placed on the yarding of lumber in unit packages. Included are topics such as why lumber is dried...

Simplified Guidelines to Hardwood Lumber Grading

Treesearch

Walton R. Smith

1967-01-01

All native hardwood lumber is graded according to the rules established by the National Hardwood Lumber Association. The rules are complete and detailed so that they permit accurate lumber grading with a minimum of personal judgment. To the student lumber grader, the many fine points and exceptions by species are often confusing and hide the basic rules of standard...

Commercial lumber, round timbers, and ties

Treesearch

David E. Kretschmann

2010-01-01

When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

The influence of lumber grade on machine productivity in the rough mill

Treesearch

Philip H. Steele; Jan Wiedenbeck; Rubin Shmulsky; Anura Perera; Anura Perera

1999-01-01

Lumber grade effect on hardwood-part processing time was investigated with a digitally described lumber database in conjunction with a crosscut-first rough mill yield optimization simulator. In this study, the digital lumber sample was subdivided into five hardwood lumber grades. Three cutting bills with varying degrees of difficulty were Cut." The three cutting...

DEP : a computer program for evaluating lumber drying costs and investments

Treesearch

Stewart Holmes; George B. Harpole; Edward Bilek

1983-01-01

The DEP computer program is a modified discounted cash flow computer program designed for analysis of problems involving economic analysis of wood drying processes. Wood drying processes are different from other processes because of the large amounts of working capital required to finance inventories, and because of relatively large shares of costs charged to inventory...

The potential for developing alternate grading rules for birch lumber in Alaska

Treesearch

D. Nicholls; D. Parrent; K.J. Pavia

2004-01-01

Alaska birch lumber is often characterized by small knots and other character defects that can reduce its value when graded according to conventional hardwood lumber-grading rules. In this study, 626 boards (2,782 board feet of lumber) were graded; first according to standard National Hardwood Lumber Association (NHLA) rules, and then a second time using an alternative...

Development of Grading Systems for Short-Length Lumber

Treesearch

Eugene M. Wengert; Robert W. Rice; James G. Schroeder

1987-01-01

The abundance of low grade hardwood timber and a shortage of high grade timber of many species has led to the examination of alternative processing methods for converting logs to lumber. However, present grading rules for short length lumber are not good predictors of the lumber's true value. A new method of grading short length lumber is proposed, with furniture...

Factors affecting regional changes in hardwood lumber production

Treesearch

William G. Luppold; Gilbert P. Dempsey; Gilbert P. Dempsey

1994-01-01

Hardwood lumber production increased by nearly 1.8 billion board feet between 1986 and 1990 and decreased sharply in 1991. However, not all areas of the country experienced the same growth in hardwood lumber production during the 1980s. While lumber production in inland regions of the eastern United States and the west increased during the 1980s, lumber output in...

Value loss of hardwood lumber during air-drying

Treesearch

Leland F. Hanks; Margaret K. Peirsol

1975-01-01

Dry lumber prices were applied to green and air-dried lumber that was measured with a dry board rule. Values were summed by species, lumber grade, and thickness class. Differences between green and air-dried lumber value have been termed value losses and are given in dollars and in percentages. The percentages have been separated into loss due to shrinkage and loss due...

Aspen lumber for building purposes

Treesearch

Louis W. Rees

1947-01-01

Recent shortages of lumber for building purposes make it desirable to seek out all possible supplies of additional lumber. Aspen, according to a study made in northern Minnesota during 1944, may be a source of lumber largely untapped. The results of that study are the main basis of this paper. In the past, aspen has received little consideration as a source of lumber,...

The development of uneven-aged southern pine silviculture before the Crossett Experimental Forest (Arkansas, USA)

Treesearch

Don C. Bragg

2017-01-01

Although the Crossett Experimental Forest (CEF) played a well-publicized role in the development of uneven-aged southern pine silviculture, work on a selection method in Arkansas (USA) did not originate there. In 1925, Leslie Pomeroy and Eugene Connor acquired the Ozark Badger Lumber Company and initiated an expert-driven selection management system compatible with...

Reduce dimension costs by using WALNUT

Treesearch

David G. Martens; David G. Martens

1986-01-01

A computer program called WALNUT is described that determines the leastcost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, WALNUT can be used to determine the next best alternative. The steps involved in using the program are described.

Second-order polynomial model to solve the least-cost lumber grade mix problem

Treesearch

Urs Buehlmann; Xiaoqiu Zuo; R. Edward Thomas

2010-01-01

Material costs when cutting solid wood parts from hardwood lumber for secondary wood products manufacturing account for 20 to 50 percent of final product cost. These costs can be minimized by proper selection of the lumber quality used. The lumber quality selection problem is referred to as the least-cost lumber grade mix problem in the industry. The objective of this...

Impacts of changing hardwood lumber consumption and price on stumpage and sawlog prices in Ohio

Treesearch

William Luppold; Matthew Bumgardner; T. Eric. McConnell

2014-01-01

In the early 2000s, increasing US furniture imports preceded declining US hardwood lumber demand and price. In the summer of 2002, however, hardwood lumber prices started to increase as demand by construction industries increased. By the mid-2000s, hardwood lumber prices hit all-time highs. Lumber prices hit all-time highs for red oak (Quercus spp...

Influence of Lumber Volume Maximization on Value in Sawing Hardwood Sawlogs

Treesearch

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1992-01-01

Research based on applying volume-maximizing sawing solutions to idealized hardwood log forms has shown that average lumber yield can be increased by 6 percent. It is possible, however, that a lumber volume-maximizing solution may result in a decrease in lumber grade and a net reduction in total value of sawn lumber. The objective of this study was to determine the...

Incidence of the 1996 U.S.-Canada Softwood lumber agreement among landowners, loggers, and lumber manufacturers in the U.S. South

Treesearch

Yanshu Li; Daowei Zhang

2010-01-01

A framework was developed to estimate the welfare incidence of the 1996 U.S.-Canada Softwood Lumber Agreement among producers in two-processing-stage markets--timberland owners, loggers, and lumber manufacturers--in the U.S. South. Timberland owners are the largest beneficiary whereas lumber manufacturers are the second and loggers the least. Empirically, without...

Lumber grades from young-growth Douglas-fir.

Treesearch

E.E. Matson

1952-01-01

Young Douglas-fir timber is known to produce much No. 1 Common and Better lumber but, little or no clear lumber. The volume of lumber produced from young-growth timber has become a sizable part of the cut from the Douglas-fir region of Oregon and Washington. No exact figures are available, but it is estimated that more than one-fourth of the lumber produced from this...

Crook and overlength in hardwood lumber:results from a 14-mill survey

Treesearch

Jan Wiedenbeck; John Brown; Neal Bennett

2003-01-01

Data on red oak lumber were collected at 14 furniture and cabinet industry rough mills to identify how crook and overlength are related to lumber grade and size from mill to mill. The amount of crook in a sample of dry, 4/4 thickness, red oak lumber was significantly influenced by lumber grade and length, supply region, and mill. There were no differences in crook...

Western redcedar lumber recovery from a western Washington sawmill.

Treesearch

E.E. Matson

1957-01-01

During the summer of 1956 a lumber-recovery study was made at E. C. Miller Lumber Company in Aberdeen, Wash. to determine the grades of lumber that can be expected from western redcedar logs. This sawmill is equipped with a 24-foot carriage, a 10-foot band headrig, a band pony headrig, and an edger. All of the upper grades of lumber are seasoned and then sent to the...

New estimates of hardwood lumber exports to Europe and Asia

Treesearch

William G. Luppold; R. Edward Thomas; R. Edward Thomas

1991-01-01

Explains how earlier estimates of hardwood-lumber exports were in error, discusses the procedures used to develop a new set of hardwood-lumber export estimates, and presents a detailed set of new hardwood-lumber export estimates for European and Asian markets.

A multivariate model and statistical method for validating tree grade lumber yield equations

Treesearch

Donald W. Seegrist

1975-01-01

Lumber yields within lumber grades can be described by a multivariate linear model. A method for validating lumber yield prediction equations when there are several tree grades is presented. The method is based on multivariate simultaneous test procedures.

A Computer Vision System for Automated Grading of Rough Hardwood Lumber Using a Knowledge-Based Approach

Treesearch

Tai-Hoon Cho; Richard W. Conners; Philip A. Araman

1990-01-01

A sawmill cuts logs into lumber and sells this lumber to secondary remanufacturers. The price a sawmiller can charge for a volume of lumber depends on its grade. For a number of species the price of a given volume of material can double in going from one grade to the next higher grade. Thus, accurately establishing the grade of a volume of hardwood lumber is very...

Experimental shear strength of unchecked solid-sawn Douglas-fir

Treesearch

D. R. Rammer; L. A. Soltis; P. K. Lebow

This report presents experimental results of modulus of rupture and shear strength tests on unsplit, green, sawn Douglas-fir lumber. Five different size-matched specimens, ranging from nominal 2-by 4-in (standard 38- by 89-mm) to nominal 4- by 14-in (standard 95-by 343-mm), were tested in third-point bending and five-point beam shear. A total of 120 bending and 160...

Chapter 9:Red maple lumber resources for glued-laminated timber beams

Treesearch

John J. Janowiak; Harvey B. Manbeck; Roland Hernandez; Russell C. Moody

2005-01-01

This chapter evaluates the performance of red maple glulam beams made from two distinctly different lumber resources: 1. logs sawn using practices normally used for hardwood appearance lumber recovery; and 2. lower-grade, smaller-dimension lumber primarily obtained from residual log cants.

19 CFR 12.142 - Entry of softwood lumber and softwood lumber products from any country into the United States.

Code of Federal Regulations, 2010 CFR

2010-04-01

....C. 1202 et seq.) that is entered or withdrawn from warehouse for consumption, in the customs... estimated export charge data. (ii) Each importer of softwood lumber and softwood lumber products for which a...

19 CFR 12.142 - Entry of softwood lumber and softwood lumber products from any country into the United States.

Code of Federal Regulations, 2011 CFR

2011-04-01

....C. 1202 et seq.) that is entered or withdrawn from warehouse for consumption, in the customs... estimated export charge data. (ii) Each importer of softwood lumber and softwood lumber products for which a...

GRASP - A Prototype Interactive Graphic Sawing Program - (Forest Products Journal)

Treesearch

Luis G. Occeña; Daniel L. Schmoldt

1996-01-01

A versatile microcomputer-based interactive graphics sawing program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, and even veneering. The microcomputer platform makes the tool affordable and accessible. A solid modeling basis provides the tool with a sound geometrical...

GRASP - A Prototype Interactive Graphic Sawing Program - (MU-IE Technical Report)

Treesearch

Luis G. Occeña; Daniel L. Schmoldt

1995-01-01

A versatile microcomputer-based interactive graphics program has been developed as a tool for modeling various hardwood processes, from bucking and topping to log sawing, lumber edging, secondary processing, even veneering. The microcomputer platform makes the tool affordable and accessible.A solid modeling basis provides the tool with a sound geometrical and...

Durability of structural lumber products after exposure at 82°C and 80% relative humidity

Treesearch

David W. Green; James W. Evans; Cherilyn A. Hatfield; Pamela J. Byrd

2005-01-01

Solid-sawn lumber (Douglas-fir, southern pine, Spruce–Pine–Fir, and yellow-poplar), laminated veneer lumber (Douglas-fir, southern pine, and yellow-poplar), and laminated strand lumber (aspen and yellow-poplar) were heated continuously at 82°C (180°F) and 80% relative humidity (RH) for periods of up to 24 months. The lumber was then reconditioned to room temperature at...

Timber rivets in structural composite lumber

Treesearch

Ronald W. Wolfe; Marshall Begel; Bruce Craig

2004-01-01

Timber rivet connections, originally developed for use with glulam construction, may be a viable option for use with structural composite lumber (SCL) products. Tests were conducted on small samples to assess the performance and predictability of timber rivet connections in parallel strand lumber (PSL) and laminated strand lumber (LSL). The test joint configurations...

Drying hardwood lumber

Treesearch

Joseph Denig; Eugene M. Wengert; William T. Simpson

2000-01-01

Drying Hardwood Lumber focuses on common methods for drying lumber of different thickness, with minimal drying defects, for high quality applications. This manual also includes predrying treatments that, when part of an overall quality-oriented drying system, reduce defects and improve drying quality, especially of oak lumber. Special attention is given to drying white...

ALPS- A potential new automated lumber processing system

Treesearch

Charles W. McMillin; Richard W. Conners; Henry A. Huber

1984-01-01

During conventional production of solid wood furniture parts, logs are first sawed into lumber having defects randomly located throughout the board. The lumber is then remanufactured and the defects removed by ripping and crosscutting. The process is labor intensive, and saw kerf losses alone waste substantial volumes of lumber.

Kiln drying maple for structural uses

Treesearch

Xiping Wang; William T. Simpson; Brian K. Brashaw; Robert J. Ross

2002-01-01

Structural lumber products are traditionally manufactured from softwoods. However, with shrinking supplies of softwood lumber and abundant supplies of hardwood lumber, there is increasing interest in the use of hardwoods for structural applications. One factor that will be important in both the technical and economic feasibility of using hardwoods for structural lumber...

Cultural Resources Evaluation of Portions of the Aloha-Rigolette Area, Louisiana Flood Control Project, Grant Parish, Louisiana

DTIC Science & Technology

1992-11-01

OF ENGINEERS P.O. BOX 60267 NEW ORLEANS. LOUISIANA 70160-0267 REPLY TO ATTENTIONOF: May 5, 1992 Planning Division Environmental Analysis Branch To The...tools used for exploiting botanical as well as faunal resources. This includes mortars, pestles , and mealing stones (Rue 1990). The atlatl, or spear...included the J.A. Bently Lumber Co., Urania Lumber Co., Bodcaw Lumber Co., and Industrial Lumber Co. The expansion of the lumber industry directly related

Examination of worldwide hardwood lumber production, trade, and apparent consumption: 1995-2013

Treesearch

William G. Luppold; Matthew S. Bumgardner

2015-01-01

Worldwide hardwood lumber production fluctuated between 1995 and 2013 and changed considerably with respect to regional market shares. Similarly, worldwide hardwood lumber imports and exports have been constantly changing. Understanding these changes is important because collectively, they define the hardwood lumber consumption of a region or country. In 1995, North...

An econometric model of the hardwood lumber market

Treesearch

William G. Luppold

1982-01-01

A recursive econometric model with causal flow originating from the demand relationship is used to analyze the effects of exogenous variables on quantity and price of hardwood lumber. Wage rates, interest rates, stumpage price, lumber exports, and price of lumber demanders' output were the major factors influencing quantities demanded and supplied and hardwood...

Evolution of tensile design stresses for lumber

Treesearch

William L. Galligan; C. C. Gerhards; R. L. Ethington

1979-01-01

Until approximately 1965, allowable design stresses for lumber in tension were taken as equal to those assigned for bending. As interest in tensile properties increased, testing machines were designed specifically to stress lumber in tension. Research results that accumulated on tensile tests of full-size lumber suggested lower design stresses for tension than for...

Evaluation of an automated hardwood lumber grading system

Treesearch

D. Earl Kline; Philip A. Araman; Chris Surak

2001-01-01

Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading technologies....

29 CFR 779.355 - Classification of lumber and building materials sales.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Classification of lumber and building materials sales. 779... Service Establishments Lumber and Building Materials Dealers § 779.355 Classification of lumber and building materials sales. (a) General. In determining, for purposes of the section 13(a)(2) and (4...

29 CFR 779.355 - Classification of lumber and building materials sales.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Classification of lumber and building materials sales. 779... Service Establishments Lumber and Building Materials Dealers § 779.355 Classification of lumber and building materials sales. (a) General. In determining, for purposes of the section 13(a)(2) and (4...

29 CFR 779.355 - Classification of lumber and building materials sales.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Classification of lumber and building materials sales. 779... Service Establishments Lumber and Building Materials Dealers § 779.355 Classification of lumber and building materials sales. (a) General. In determining, for purposes of the section 13(a)(2) and (4...

Economic choice for hardwood sawmill operations (ECHO)

Treesearch

P.H. Steele; Philip A. Araman; C. Boden

2002-01-01

Reductions in sawkerf on headrigs and resaws can dramatically increase lumber recovery. Research has also shown that lumber target size reductions are even more important than kerf reductions in providing increased lumber recovery. Decreases in either sawkerf or lumber size, however, always come at some cost in both capital and variable costs. Determining whether the...

Green Lumber Grade Yields for Subfactory Class Hardwood Logs

Treesearch

Leland F. Hanks; Leland F. Hanks

1973-01-01

Data on lumber grade yields for subfactory class logs are presented for ten species of hardwoods. Eogs of this type are expected to assume greater importance in the market. The yields, when coupled with lumber prices, will be useful to sawmill operators for developing log prices in terms of standard factory lumber.

Influence of markets and forest composition on lumber production in Pennsylvania

Treesearch

William G. Luppold; Matthew S. Bumgardner

2006-01-01

In this study, we examine regional differences in the hardwood timber resources of Pennsylvania and how the combined changes in inventory volume, forest composition, and lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production reflect changes in harvesting activity. In turn, harvesting...

Lumber Grading With A Computer Vision System

Treesearch

Richard W. Conners; Tai-Hoon Cho; Philip A. Araman

1989-01-01

Over the past few years significant progress has been made in developing a computer vision system for locating and identifying defects on surfaced hardwood lumber. Unfortunately, until September of 1988 little research had gone into developing methods for analyzing rough lumber. This task is arguably more complex than the analysis of surfaced lumber. The prime...

Procedures used to estimate hardwood lumber consumption from 1963 to 2002

Treesearch

William Luppold; Matthew Bumgardner

2008-01-01

This paper presents an explanation for and procedures used to estimate hardwood lumber consumption by secondary hardwood processing industries from 1963 to 2002. This includes: classification of industry and industry groups, development of proxy prices used to estimate lumber consumption, assumptions used to convert dimension purchases to lumber consumption, estimation...

Integrated least-cost lumber grade-mix solver

Treesearch

U. Buehlmann; R. Buck; R.E. Thomas

2011-01-01

Hardwood lumber costs account for up to 70 percent of the total product costs of U.S. secondary wood products producers. Reducing these costs is difficult and often requires substantial capital investments. However, lumber-purchasing costs can be minimized by buying the least-cost lumber grade-mix that satisfies a company's component needs. Price differentials...

Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

Treesearch

David G. Marten; David G. Marten

1986-01-01

Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

A Computer Program You Can Use: Edging and Trimmer Trainer

Treesearch

Philip A. Araman; D. Earl Kline; Matthew F. Winn

1996-01-01

We present a computerized training tool designed to help hardwood sawmill edger and trim saw operators improve their processing performance. It can also be used by managers to understand the affects of processing decisions such as limiting wane beyond standard grading rule restrictions. The program helps users understand the relationships between lumber grade, surface...

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). his evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory....

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). This evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory...

Predicting internal lumber grade from log surface knots: actual and simulated results.

Treesearch

Christine Todoroki; Robert A. Monserud; Dean L. Parry

2005-01-01

The purpose of this study was threefold: 1) compare actual with simulated lumber yields; 2) examine the effect of measurement errors associated with knot angles and morphology. on lumber grade; and 3) investigate methods for predicting lumber quality within unsawn logs from surface knots. Twenty-eight Douglas-fir (Pseudotsuga menziesii(Mii irb.)...

Lumber recovery from ponderosa pine in northern California.

Treesearch

Susan Ernst; Pong W.Y.

1985-01-01

Lumber recovery information from 942 logs from old- and young-growth ponderosa pine (Pinus ponderosa Dougl. ex Laws.) trees in northern California is presented. More than 58 percent of the lumber volume was found in 5/4 Shop, Moulding, and Select grades. About 25 percent of the total lumber volume was Moulding, and 24 percent was Standard and...

Automated hardwood lumber grading utilizing a multiple sensor machine vision technology

Treesearch

D. Earl Kline; Chris Surak; Philip A. Araman

2003-01-01

Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical and Computer Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading...

Maintenance Procedures for North American Visually-graded Dimension Lumber Design Values

Treesearch

David Kretschmann; Don DeVisser; Kevin Cheung; Bob Browder; Al Rozek

2014-01-01

ASTM International D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens, that governs the development of design values for dimension lumber in North America, was first adopted in 1991with recognition that the resource and manufacturing of lumber could change over time impacting...

Laminated lumber may be more profitable than sawn lumber

Treesearch

P. Koch

1976-01-01

By laminating 1/4-in. rotary-cut veneer into structural lumber, manufacturers can expand lumber output by at least 30% without increasing volume logged. The idea merits intensive study. Manufacturing plus raw material costs should total about $142/Mbf; sales price for desirable widths and lengths of the strong laminated product should approach or exceed $200/Mbf.

Influence of edging practices on cutting yields of Alaska birch lumber

Treesearch

David L. Nicholls; J.W. Funck; C.C. Brunner; J.E. Reeb

2009-01-01

Birch lumber is often characterized by a high degree of knots, bark pockets, heartwood, and other features which force sawmill owners to decide whether to edge and trim boards to produce standard grade lumber vs. proprietary grade character-marked lumber. In addition, the edging strategies used with irregularly shaped flitches can greatly influence cut-stock recovery....

Limitations of lumber-yield nomograms for predicting lumber requirements

Treesearch

Kristen Hoff

2000-01-01

Lumber yield nomograms developed during the last 30 years have limited use when predicting the volume of rough lumber required to fill a particular cutting bill. Inaccuracies occur when nomogram yields are applied to situations in which processing technologies differ from those used during data collection, and when a variety of lengths and widths are specified in the...

The reuse of treated wood

Treesearch

Robert L. Smith; David Bailey; Delton R. Alderman; Philip A. Araman

2006-01-01

The primary goals of this book chapter are to identify barriers to the reuse of treated lumber, to describe the physical properties of spent chromated copper arsenate (CCA)-treated lumber coming from residential decks and to identify potential products and markets that can use spent treated lumber. The primary focus will be on CCA-treated lumber because it has been the...

Regional Changes in the Timber Resources of and Lumber Production in Pennsylvania

Treesearch

William G. Luppold; Matthew S. Bumgardner; Matthew S. Bumgardner

2005-01-01

In this study we examine regional differences in the hardwood timber resources of Pennsylvania and explain how the combined changes in this resource and in lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production affect harvesting levels and harvesting activity influences long-term...

Improving lumber yield using a dual system

Treesearch

R. Edward Thomas; Omar Espinoza; Urs Buehlmann

2015-01-01

Rough mills embody the process of cutting up kiln-dried lumber to components used by discrete wood products manufacturers to manufacture products like furniture, kitchen cabinets, flooring, or other items. Rough mills traditionally have either ripped the lumber first (e.g., the lumber is first cut into strips lengthwise) then cut the strips to the required part lengths...

Efficacy of curtailment announcements as a predictor of lumber supply

Treesearch

Henry Spelter

2001-01-01

A practical method for tracking the effect of curtailment announcements on lumber supply is described and tested. Combining announcements of closures and curtailments with mill capacities enables the creation of accurate forward-looking assessments of lumber supply 1 to 2 months into the future. For three American and Canadian lumber- producing regions, the method...

An ultrasonic technique for predicting tensile strength of southern pine lumber

Treesearch

D. Rajeshwar; D.A. Bender; D.E. Bray; K.A. McDonald

1997-01-01

The goal of this research was to develop nondestructive evaluation (NDE) technology to enhance mechanical stress rating of lumber. An ultrasonic NDE technique was developed that is sensitive to grain angle and edge knots in lumber - two primary determinants of lumber strength. The presence of edge knots increased the acoustic wave travel time and selectively...

Ultrasonic inspection and analysis techniques in green and dried lumber

Treesearch

Mark E. Schafer; Robert J. Ross; Brian K. Brashaw; Roy D. Adams

1999-01-01

Ultrasonic inspection of lumber has been under investigation for over 20 years, with little commercial impact. Recently, the USDA Forest Products Laboratory (FPL) developed ultrasound-based scanning technology to examine both green and dried lumber. In green lumber, the bacterial infection called wetwood (a significant source of degradation in oak at the kiln-drying...

Evaluation of the retail market potential for locally produced paper birch lumber in Alaska.

Treesearch

David L. Nicholls

2002-01-01

An evaluation of the retail market potential for random-width paper birch ( Betula papyrifera Marsh.) lumber in Alaska was conducted. Information from lumber manufacturers and retail managers was used to identify current barriers to customer acceptance of locally produced paper birch lumber. Major retail markets and paper birch producing regions throughout Alaska were...

Growth and shifts in eastern hardwood lumber production

Treesearch

William G. Luppold; Gilbert P. Dempsey

1993-01-01

An analysis of recent trends in eastern U.S. hardwood lumber production indicates that total output increased sharply between 1977 and 1991. The increase, however, was much more pronounced in the East's northern tier of states than in the southern. This paper first examines recent hardwood lumber usage trends and historic hardwood lumber production trends. Changes...

7 CFR 319.40-2 - General prohibitions and restrictions; relation to other regulations.

Code of Federal Regulations, 2010 CFR

2010-01-01

...—Fruits and Vegetables.” (d) Regulated articles imported for experimental, scientific or educational... Logs, Lumber, and Other Unmanufactured Wood Articles § 319.40-2 General prohibitions and restrictions; relation to other regulations. (a) Permit required. Except for regulated articles exempted from this...

Lumber grade recoverey from Hawaii-grown robusta Eucalyptus logs

Treesearch

Roger G. Skolmen

1970-01-01

In part to supplement meager data on lumber grade yield of Hawaii-grown timber, 30 robusta eucalyptus logs were shipped to a Michigan sawmill for processing. The logs were from 12 trees in three different stands. The lumber produced was graded according to National Hardwood Lumber Association standards. The sample was too small to provide a basis for predicting grade...

Characterizing the adoption of low-grade hardwood lumber by the secondary wood processing industry

Treesearch

Robert L. Smith; Wibke Pohle; Philip Araman; Dan Cumbo

2004-01-01

This study investigated the adoption of low-grade lumber in the secondary hardwood industry. Factors influencing decisions regarding the utilization of low-grade lumber were identified and value-added opportunities to increase the use of low-grade lumber among manufacturers currently using higher grades were evaluated. Data were collected via a nationwide mail survey...

A profile of the nonresidential nonbuilding construction market for lumber and plywood

Treesearch

H. N. Spelter

Estimates of the amounts of lumber and plywood used in constructing nonresidential nonbuilding structures in 1982 are presented. The market is stratified by six construction types. Lumber and plywood use is stratified by two end-use categories. Total lumber use is estimated at 507 million board feet. Total plywood use at 362 million square feet (3/8-in. basis)....

Lumber recovery from dead ponderosa pine in the Colorado front range.

Treesearch

Susan Willits; Richard O. Woodfin; Thomas A. Snellgrove

1990-01-01

Lumber recovery information from live and beetle-killed ponderosa pine (Pinus ponderosa Dougl. ex Laws) in the Colorado Front Range is presented. No significant difference in lumber volume was found among the samples. Significant differences were found in lumber value among the live, 1-year-dead, and 3- to 5-year-dead samples. About 10 percent of...

Hardwood Lumber Edger and Trimmer Training System

Treesearch

D. Earl Kline; Eugene M. Wengert; Philip A. Araman; Powsiri Klinkhachorn

1992-01-01

This paper describes a computerized hardwood lumber edger and trimming training system. The purpose of the training system is to help edger and trimmer operators and sawmill managers better understand how hardwood lumber grade, surface measure, and price interact to affect lumber value. The training system can be used both as a training tool and as a testing tool. As a...

Effects of log defects on lumber recovery.

Treesearch

James M. Cahill; Vincent S. Cegelka

1989-01-01

The impact of log defects on lumber recovery and the accuracy of cubic log scale deductions were evaluated from log scale and product recovery data for more than 3,000 logs. Lumber tally loss was estimated by comparing the lumber yield of sound logs to that of logs containing defects. The data were collected at several product recovery studies; they represent most of...

New estimates of hardwood lumber exports from the central hardwood region

Treesearch

W. Luppold; E. Thomas

1991-01-01

Exports have become an increasingly important part of the overall hardwood lumber market. However, recent findings indicate that much of the reported growth of hardwood lumber exports in the 1980's was based on inflated volume data. This paper presents new estimates of hardwood lumber exports to Asia and Europe with emphasis on the central hardwood region of the...

Domestic hardwood lumber consumption and exports, yesterday and today

Treesearch

William G. Luppold; Matt Bumgardner

2016-01-01

Domestic Hardwood lumber consumption has changed considerably in this century, but how do these changes differ from changes that have occurred over the last 50 years and how have they affected lumber price? In this article, we examine how changes in consumption have influenced aggregate Hardwood lumber prices as reported by the U.S. Bureau of Labor Statistics adjusted...

Shrinkage and footage loss from drying 4/4-inch hard maple lumber.

Treesearch

Daniel E. Dunmire

1968-01-01

Equations are presented for estimating shrinkage and resulting footage losses due to drying hard maple lumber. The equations, based on board shrinkage data taken from a representative lumber sample, are chiefly intended for use with lots of hard maple lumber, such as carloads, truckloads, or kiln loads, but also can be used for estimating the average shrinkage of...

White fur lumber recovery at a western Washington sawmill.

Treesearch

E.E. Matson

1957-01-01

In April 1956 a study was made in western Washington to determine grades of lumber that could be expected from silver fir (Abies amabilis) and grand fir (Abies grandis) which are grouped together the lumber industry and sold as white fir. At the sawmill where the study was made, none of the lumber is seasoned and most of it is...

What Do Regional Changes in Lumber Production Tell Us About Future Competitiveness?

Treesearch

William G. Luppold

2005-01-01

Between 1984 and 1999 Eastern hardwood lumber production increased by nearly 3 billion board feet (Figure I). More amazingly, hardwood lumber production in the 1990's was 10 percent higher than the previous peak period of 1904 to 1913. Since 1999, the hardwood lumber industry has suffered through four years of declining production and demand before experiencing a...

Manufacturers and distributors in the U.S. hardwood lumber supply chain: Perceptions of industry trends

Treesearch

Omar Espinoza; Urs Buehlmann; Matthew Bumgardner; Bob Smith

2011-01-01

Global competition, a slowing housing market, and shifts in the customer base have contributed to reduced demand for hardwood lumber and have increased the need for specialized services by suppliers of hardwood lumber such as sawmills or distributors. Customers of hardwood lumber suppliers also have started initiatives to reduce internal costs dramatically, frequently...

Intermediaries in the U.S. hardwood lumber market: comparing and contrasting sawmills and distributors

Treesearch

Omar Espinoza; Urs Buehlmann; Matthew Bumgardner; Robert Smith

2014-01-01

The objective of this study was to better understand changes in the hardwood lumber supply chain from the perspective of lumber producers and distributors and to assess the degree of judgmental convergence between suppliers and buyers of hardwood lumber. Results from two nationwide surveys conducted in 2008 and 2009 were used for the analysis. Findings confirmed a...

Lumber grades from Douglas-fir peeler logs.

Treesearch

E.E. Matson

1952-01-01

Sawmill companies often must decide whether it is more economical to sort and sell peeler logs than to cut them into lumber. If the mill owners have reliable data on the grade of lumber that can be expected from these logs, they will be better prepared to make the decision. The Pacific Northwest Forest and Range Experiment Station has made several lumber grade recovery...

Consumer preferences and willingness to pay for character-marked cabinets from Alaska birch.

Treesearch

Geof Donovan; David Nicholls

2003-01-01

Alaska birch lumber has a higher occurrence of defects (knots, bark pockets, flecks, spalting, etc.) when compared to competing hardwoods. These defects are a disadvantage when birch lumber is graded under standard National Hardwood Lumber Association (NHLA) grading rules. This paper examines whether defects and other character markings found in birch lumber may be an...

Evaluation of a multi-sensor machine vision system for automated hardwood lumber grading

Treesearch

D. Earl Kline; Chris Surak; Philip A. Araman

2000-01-01

Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading technologies. The...

Lumber Grade Yields for Graded Aspen Logs and Trees

Treesearch

Leland F. Hanks; Robert L. Brisbin

1978-01-01

Green lumber grade yields for aspen were determined for use with the U.S. Forest Service hardwood log and tree grades. The yields for logs are expressed in percent of total lumber tally volume, and those for trees are expressed in board feet. Overruns for the International 1/4-inch and Scribner log rules along with lumber recovery factors are shown by log grade.

Changes in U.S. hardwood lumber exports, 1990 to 2008

Treesearch

William Luppold; Matthew Bumgardner

2011-01-01

The volume of hardwood lumber exported from the United States grew by 63 percent between 1990 and 2006 before decreasing by 29 percent between 2006 and 2008. Canada is both the largest export market for U.S. hardwood lumber and the largest source country for hardwood lumber imported into the United States. In the last 19 years China/Hong Kong has displaced Japan as the...

How low are hardwood lumber prices in real terms?

Treesearch

William Luppold

2012-01-01

Prices for grade hardwood lumber have remained stubbornly low for several years. But, just how low are lumber prices? While prices reported by Hardwood Market Report for #1C lumber in most Appalachian species have increased since the summer of 2009 low point, with the exception of yellow-poplar, they are 3 to 50 percent lower than they were in the fall of 2005. The...

Dimension lumber grades from white fir in Lakeview area.

Treesearch

E.E. Matson

1955-01-01

Production of white fir lumber in the western pine region amounted to a little more than a billion board feet in 1954, or about 13 percent of the output of pine-region sawmills. Moreover, production of the white fir lumber is expanding, and it is important to know what grades of lumber can be expected so that timber and log values can be more accurately appraised....

Effect of cutting bill requirements on lumber yield in a rip-first rough mill

Treesearch

Urs Buehlmann; Janice K. Wiedenbeck; E. Earl Kline; E. Earl Kline

2003-01-01

In recent years, producers of solid wood dimension parts have emphasized improvements in lumber yield, focusing primarily on lumber grade and cutting technology rather than cutting bill design. Yet, cutting bills have a significant impact on yield. Using rip-first rough mill simulation software, a data bank of red oak lumber samples, and a cutting bill that resembles...

Hampton sets pace for third year : sawmill in Willamina fights off challengers for highest producer

Treesearch

Henry Spelter

2005-01-01

Over the last 50 years many changes have roiled lumber markets. On the positive side, treated lumber has created major opportunities for lumber use in outdoor applications. But some negative developments underscore the mature status of lumber as a commodity. Sheathing had been lost long ago to panels. Likewise, roof rafters and joists have been supplanted by less wood-...

Assessment of the lumber drying industry and current potential for value-added processing in Alaska.

Treesearch

David L. Nicholls; Kenneth A. Kilborn

2001-01-01

An assessment was done of the lumber drying industry in Alaska. Part 1 of the assessment included an evaluation of kiln capacity, kiln type, and species dried, by geographic region of the state. Part 2 of the assessment considered the value-added potential associated with lumber drying. Various costs related to lumber drying were evaluated in an Excel spreadsheet....

Temperature corrections for mechanically graded lumber

Treesearch

David W. Green; James W. Evans; James D. Logan; Jim Allen

1999-01-01

The continuous lumber tester (CLT) is the most widely used grading machine in the world. With the CLT, the flatwise bending stiffness of lumber is measured as it passes through the machine. The modulus of elasticity (MOE) is calculated from the force required to bend the lumber to a fixed deflection of 7.94 mm (5/16 in.), and this MOE is used in assigning a machine...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2014 CFR

2014-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2012 CFR

2012-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2013 CFR

2013-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2010 CFR

2010-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2011 CFR

2011-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of...

Variation in natural durability of seven Eucalyptus grandis x Eucalyptus urophylla hybrid clones

Treesearch

F.J.N. Franca; T.S.F.A. Franca; R.A Arango; B.M. Woodward; G.B. Vidaurre

2017-01-01

Programs aimed at developing clones of hybrid trees are commonly established in Brazil to meet the demands of various forest-based industries. These programs have continually improved the quality of eucalyptus wood, which has the potential to reduce deforestation by lowering demand for other high-value species. This is particularly true in the lumber market, but little...

The Forgotten Forest--New Training for Sawmillers and Wood Handlers.

ERIC Educational Resources Information Center

Ringling, Dennis F.

1978-01-01

Considers the full-time program in sawmilling and wood handling at Williamsport Area Community College (Pennsylvania), which stresses head sawing; edging and trimming processes; log and lumber grading; marketing and business principles; yard, storage, and kiln operations; and sawmill skills. (MB)

Western hemlock lumber recovery at a western Washington sawmill.

Treesearch

E.E. Matson

1957-01-01

During April 1956, a study was made at a western Washington sawmill to determine lumber grades that my be expected from old-growth western hemlock timber. Lumber cut at this mill is not seasoned and most of it is sold surfaced-green. It is the practice at this plant to use the band headrig for producing side-cut lumber and to send the large cants—the full...

Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

Treesearch

Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

2003-01-01

Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

A Computer Vision System forAnalyzing Images of Rough Hardwood Lumber

Treesearch

Tai-Hoon Cho; Richard W. Conners; Philip A. Araman

1990-01-01

A sawmill cuts logs into lumber and sells this lumber to secondary remanufacturers. The price a sawmiller can charge for a volume of lumber depends on its grade. For a number of species the price of a given volume of material can double in going from one grade to the next higher grade. While the grade of a board largely depends on the distribution of defects on the...

Estimated demand for lumber and plywood in Hawaii by the year 2000

Treesearch

George D. Frazier

1965-01-01

By the year 2000, total lumber consumption in Hawaii is expected to be between 78 and 128 million board feet. Hardwood lumber consumption is expected to exceed 16 million board feet — an increase of nearly 2½ times the present level of use. In contrast, softwood lumber use is expected to remain at about the present level of 79 million board feet. Plywood...

Composition, volume, and prices for major softwood lumber types in western Oregon and Washington, 1971-2020.

Treesearch

James F. Weigand

1998-01-01

An analysis of lumber prices provided regressions for price trends during the period 1971-95 for composite lumber grades of major timber species found in the Pacific Northwest west of the crest of the Cascade Range. The analysis included data for coastal Douglas-fir and hem-fir lumber; coastal and inland Pacific Northwest ponderosa, sugar, and western white pines; and...

Preliminary estimate of 1942 lumber production in the Carolinas, Virginia, West Virgina, Kentucky, and Tennessee

Treesearch

Ardie D. Toler

1943-01-01

This report, giving the estimated 1942 lumber production in six states of the Appalachian Forest Experiment Station's territory, is based on a complete canvass of all sawmills. It was made during the first half of 1943 by the U.S. Forest Service in cooperation wit the Bureau of the Census, the Lumber and Lumber products Branch of the War Production Board, and the...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Code of Federal Regulations, 2014 CFR

2014-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Code of Federal Regulations, 2012 CFR

2012-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste? Table 1 of this subpart specifies the final...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Code of Federal Regulations, 2014 CFR

2014-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste? Table 1 of this subpart specifies the final...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Code of Federal Regulations, 2012 CFR

2012-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Code of Federal Regulations, 2013 CFR

2013-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Code of Federal Regulations, 2013 CFR

2013-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste? Table 1 of this subpart specifies the final...

ROMI 3.1 Least-cost lumber grade mix solver using open source statistical software

Treesearch

Rebecca A. Buck; Urs Buehlmann; R. Edward Thomas

2010-01-01

The least-cost lumber grade mix solution has been a topic of interest to both industry and academia for many years due to its potential to help wood processing operations reduce costs. A least-cost lumber grade mix solver is a rough mill decision support system that describes the lumber grade or grade mix needed to minimize raw material or total production cost (raw...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Code of Federal Regulations, 2010 CFR

2010-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste? Table 1 of this subpart specifies the final...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Code of Federal Regulations, 2010 CFR

2010-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard...

40 CFR 60.2972 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2010 CFR

2010-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2972 Section 60.2972... Only Wood Waste, Clean Lumber, and Yard Waste § 60.2972 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of appendix A of this...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Code of Federal Regulations, 2011 CFR

2011-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard...

40 CFR 60.2972 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2011 CFR

2011-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2972 Section 60.2972... Only Wood Waste, Clean Lumber, and Yard Waste § 60.2972 How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of appendix A of this...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Code of Federal Regulations, 2011 CFR

2011-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste? Table 1 of this subpart specifies the final...

Structural lumber promising from pine veneer

Treesearch

P. Koch

1973-01-01

The possibility of laminating lumber from sliced or rotary-cut veneer has interested researchers and industrialists for many years because of the potential for increased yield and uniformity of strength. Some data on such lumber are now available.

A comparison of kiln-drying schedules and quality outcomes for 4/4-thickness black cherry lumber sawn from small-diameter logs

Treesearch

Matthew S. Scholl; Janice K. Wiedenbeck; Paul R. Blankenhorn; Charles D. Ray; Lee R. Stover; Brian W. Beakler

2008-01-01

With high stumpage prices, many sawmills are interested in the feasibility of processing smaller diameter hardwood logs. Most of these mills do not know the lumber yield, lumber grade, or cost of processing these logs. In this project we investigated the impact of alternative dry kiln schedules on the grade yields and defect occurrence in lumber sawn from small-...

Live Load Response of Short Span Bridges with Parallam(R) Decks

DOT National Transportation Integrated Search

2007-01-01

Structural Composite Lumber (SCL) is reconstituted with high grade presorted veneers to enhance properties including higher and more uniform strength and stiffness than conventional lumber. Parallel Strand Lumber (PSL) is mainly constituted of wood s...

Recognizing interactions among lumber grading rules, gang-ripping technology, and industry needs could increase the use of No.2 Common lumber

Treesearch

Charles J. Gatchell; Charles J. Gatchell

1989-01-01

Recognizing the interactions among lumber grading rules, gang-ripping technology, and the parts needs of the furniture and cabinet industries could increase the use of No. 2 Common lumber as a raw material. The minimum piece size used in establishing the No.2 Common grade is 3 inches by 2 feet. Industry often needs shorter and narrower pieces than this. No.2 Common...

The organizational implications of smokeless tobacco use in the lumber mill industry.

PubMed

Donaldson, S I; Dent, C W; Sussman, S; Stoddard, J L; Severson, H H

1996-01-01

Although much is known about the characteristics of employees who smoke cigarettes, very little is known about workers who use smokeless tobacco. The current study was designed to understand the characteristics of smokeless tobacco users in relation to their performance at work and compare them with smokers and former tobacco users. Data were collected via interviews and questionnaires from a random sample of employees working at Pacific Lumber Company (N = 146), the largest single-site lumber mill in California. A total of 63 smokeless tobacco users (21 of whom also smoked cigarettes), 43 cigarette smokers, and 40 employees who had successfully quit using tobacco (34 of whom previously used cigarettes only) provided information about their health behavior, quality of work life, and performance at work. Analyses revealed that smokeless tobacco users reported less healthful sleep patterns, drank alcohol more often, were intoxicated more often, reported less job satisfaction and organizational commitment, and reported that both chewers and smokers do not work as hard and take more breaks than do tobacco-free employees (quitters). Specific differences among chewers-only, smokers-only, smokers-and-chewers, and quitters are presented. Results suggest the organizational value of developing worksite cessation programs for smokeless tobacco users.

Pest management through tropical tree conservation

USDA-ARS?s Scientific Manuscript database

When discussing the need to improve conservation programs for native forests, arguments such as the role of vegetation in water catchment and soil conservation or as sources of food, medicines, firewood and lumber, and habitat for wildlife are commonly used. Here we argue that many native species o...

75 FR 61001 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... Research, Promotion, Consumer Education and Industry Information Order; Proposed Rules #0;#0;Federal...-AD03 Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order AGENCY... Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order (Order). Softwood...

Bioaccessibility and Solubility of Copper in Copper-Treated Lumber

EPA Science Inventory

Micronized copper (MC)-treated lumber is a recent replacement for Chromated Copper Arsenate (CCA) and Ammonium Copper (AC)-treated lumbers; though little is known about the potential risk of copper (Cu) exposure from incidental ingestion of MC-treated wood. The bioaccessibility o...

Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part III, Evaluation of full-size 2 by 4 lumber per ASTM Standard D 5664-95 Method C

Treesearch

Jerrold E. Winandy; Douglas Herdman

2003-01-01

The purpose of this work was to evaluate the effects of a new boron-nitrogen, phosphate-free fire-rerardant (FR) formulation on the initial strength of No. 1 southern pine 2 by 4 lumber and its potential for in-service thermal degradation. The lumber was evaluated according to Method C of the D 5664 standard test method. The results indicated that for lumber exposed at...

Lumber production in Arizona and New Mexico, 1960

Treesearch

Robert L. Miller

1964-01-01

Arizona sawmills turned out 329,859,000 board feet of lumber in 1960. New Mexico's lumber production in the same year was 227,773,000 board feet. Output in both States was generally in line with the upward trend in production in recent years.

Civil-Security Forces Environmental Cooperation in Central America and the Caribbean

DTIC Science & Technology

2004-07-01

shrimp farming, and the growing of melons, sugarcanes, and cashews . The NOAA program in the Gulf of Fonseca is supported by a U.S. Department of State...tangible or intangible. Tangible products include lumber, extracts (resins, glues, tannins, etc.), food from plants (fruits, nuts , roots, etc.), and

The Educational Needs of Dislocated Workers in Minnesota.

ERIC Educational Resources Information Center

Park, Rosemarie J.; And Others

A study was conducted to determine if dislocated workers in Minnesota felt they had sufficient reading and mathematics skills to obtain new employment or enter retraining programs. A representative group of 168 dislocated workers who had been employed in manufacturing, taconite mining, lumber, and farming were interviewed from June through…

JPRS Report Environmental Issues.

DTIC Science & Technology

1990-11-02

Program Views Environmental Effects [0 GLOBO 30 Sep] ............................. 31 Environmental Affairs Institute Fines Illegal Amazon Lumber...ERICA 12 Oct] .................................................................................................. 33 PERU Court Nullifies Soviet Fishing...34. He said loss of forests in Burma remains at only 0.3 He disputed reports that logs are being cut down ran- percent of forest cover per year, or

Simulation of hardwood log sawing

Treesearch

D.B. Richards; W.K. Adkins; H. Hallock; E.H. Bulgrin

1979-01-01

Mathematical modeling computer programs for several hardwood sawing systems have been developed and are described. One has judgment capabilities. Several of the subroutines are common to all of the models. These models are the basis for further research which examines the question of best-grade sawing method in terms of lumber value yield.

A survey of Bolivian lumber drying operations

Treesearch

Omar A. Espinoza; Brian H. Bond; Philip Araman

2007-01-01

The Bolivian secondary forest products industry has experienced substantial growth during the last 10 years. Particularly, important investment has taken place in lumber drying capacity. Unfortunately, little information is available regarding lumber drying technology and practices used, which is essential for the formulation of improvement strategies. The Bolivian...

Loss from variation in sawing precision

Treesearch

1964-01-01

A major loss sustained by small mills results from inaccurately cut lumber. Such lumber sells only at reduced prices and encounters stiffer sales resistance than lumber from the more accurately cutting band mills. A less apparent loss is the excessive loss of material that results from inaccurate cutting.

Preliminary lumber recovery for dead and live Engelmann spruce.

Treesearch

James M. Cahill

1980-01-01

Lumber recovery, lumber grade distribution, and log values are presented for logs cut from dead and live Engelmann spruce (Picea engelmannii Parry ex Engelm.) trees. The dead sample includes standing and down trees killed by the Engelmann spruce beetle (Dendroctonus ruffipennis Kirby) over 20 years ago.

Potential for structural lumber substitutes

Treesearch

Theodore L. Laufenberg

1985-01-01

The potential for substitution of structural wood composites into solid-sawn lumber markets is presented from the technological viewpoint. Technological limitations of existing composite processes and products are reviewed in the context of the present laminated veneer lumber (LVL), flakeboard, and fiber/ paper industries. The limits of mechanical property potential...

78 FR 68297 - Hardwood Lumber and Hardwood Plywood Promotion, Research and Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

... Marketing Service 7 CFR Part 1211 Hardwood Lumber and Hardwood Plywood Promotion, Research and Information... Promotion, Research and Information Order AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed..., Research and Information Order (Order). Hardwood lumber and hardwood plywood are used in products like...

Metrics, Lumber, and the Shop Teacher

ERIC Educational Resources Information Center

Craemer, Peter J.

1978-01-01

As producers of lumber are preparing to convert their output to the metric system, wood shop and building construction teachers must become familiar with the metric measurement language and methods. Manufacturers prefer the "soft conversion" process of changing English to metric units rather than hard conversion, or redimensioning of lumber. Some…

Influence of Product and Supplier Attributes on Hardwood Lumber Purchase Decisions

Treesearch

Craig L. Forbes; Steven A. Sinclair; Robert J. Bush; Philip A. Araman

1994-01-01

This study determined the influence of product and supplier attributes on hardwood lumber purchases by wood furniture manufacturers and investigated differences across manufacturer type, geographic region, firm size, and kiln ownership. Professional lumber buyers rated the importance and difference across suppliers of various attributes. Purchase influence scores were...

Assessing the Release of Copper from Nanocopper-treated and Conventional Copper-treated Lumber into Marine Waters II: Forms and Bioavailability

EPA Science Inventory

One application of nanocopper is as a wood‐preserving pesticide in pressure‐treated lumber. Recent research has shown that pressure‐treated lumber amended with micronized copper azole (MCA), which contains nanosized copper, releases copper under estuarine and ma...

76 FR 22757 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

...-10-0015; PR-A2] RIN 0581-AD03 Softwood Lumber Research, Promotion, Consumer Education and Industry.... SUMMARY: This rule proposes a Softwood Lumber Research, Promotion, Consumer Education and Industry... proposed Order may be obtained from the Referendum Agent, Research and Promotion Branch, Fruit and...

77 FR 40878 - Notice of Administrative Settlement Agreement for Recovery of Past Response Costs Pursuant to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-11

... recovery of past response costs (``Proposed Agreement'') associated with the Browning Lumber Company... Protection Agency, 1650 Arch Street, Philadelphia, PA 19103. Comments should reference the ``Browning Lumber... past response costs (``Proposed Agreement'') associated with the Browning Lumber Company Superfund Site...

General Design and EIS, Humboldt Harbor and Bay, California. Navigation Improvements.

DTIC Science & Technology

1976-08-01

Bakeries , Inc. 75 Bakery products Halvorsen Lumber Products 65 Sawmill——remanufacturing plant Precision Lumber Cciupany 45 Lumber Bayley Suit , Inc. 40...governments receive revenue from retail sales and use taxes, local property taxes, and city business, license or franchise taxes. The sales tax is levied

Air-drying of Robusta eucalyptus lumber

Treesearch

Roger G. Skolmen

1964-01-01

A study of air-drying 4/4 Eucalyptus robusta lumber in Hilo, Hawaii showed that during typical summer weather it can be dried to below 20 percent moisture content in 2-1/2 months. Grade reduction in 36 percent of the lumber was caused by end splits, insect damage, warp, and surface checking.

Lumber defect detection by ultrasonics

Treesearch

K. A. McDonald

1978-01-01

Ultrasonics, the technology of high-frequency sound, has been developed as a viable means for locating most defects In lumber for use in digital form in decision-making computers. Ultrasonics has the potential for locating surface and internal defects in lumber of all species, green or dry, and rough sawn or surfaced.

What's ahead in automated lumber grading

Treesearch

D. Earl Kline; Richard Conners; Philip A. Araman

1998-01-01

This paper discusses how present scanning technologies are being applied to automatic lumber grading. The presentation focuses on 1) what sensing and scanning devices are needed to measure information for accurate grading feature detection, 2) the hardware and software needed to efficiently process this information, and 3) specific issues related to softwood lumber...

Framing Lumber from Building Removal: How do We Best Utilize This Untapped Structural Resource?

Treesearch

Robert H. Falk; Steven Cramer; James Evans

2013-01-01

Compared with other construction materials, wood products are environmentally attractive because they sequester carbon, are renewable, and are low in embodied energy. Lumber salvaged from building removal possesses these same qualities but with additional environmental attributes. In spite of the environmental attractiveness of reclaimed lumber, its widespread...

Acoustic evaluation of loblolly pine tree- and lumber-length logs allows for segregation of lumber modulus of elasticity, not for modulus of rupture

Treesearch

Mark Alexander Butler; Joseph Dahlen; Thomas L. Eberhardt; Cristian Montes; Finto Antony; Richard F. Daniels

2017-01-01

Key message Loblolly pine (Pinus taeda) logs can be evaluated using acoustic velocity whereby threshold acoustic velocity values can be set to ensure lumber meets specified mechanical property design values for modulus of elasticity. Context...

Lumber Scanning System for Surface Defect Detection

Treesearch

D. Earl Kline; Y. Jason Hou; Richard W. Conners; Daniel L. Schmoldt; Philip A. Araman

1992-01-01

This paper describes research aimed at developing a machine vision technology to drive automated processes in the hardwood forest products manufacturing industry. An industrial-scale machine vision system has been designed to scan variable-size hardwood lumber for detecting important features that influence the grade and value of lumber such as knots, holes, wane,...

CT Imaging of Hardwood Logs for Lumber Production

Treesearch

Daniel L. Schmoldt; Pei Li; A. Lynn Abbott

1996-01-01

Hardwood sawmill operators need to improve the conversion of raw material (logs) into lumber. Internal log scanning provides detailed information that can aid log processors in improving lumber recovery. However, scanner data (i.e. tomographic images) need to be analyzed prior to presentation to saw operators. Automatic labeling of computer tomography (CT) images is...

40 years of hardwood lumber comsumption: 1963 to 2002

Treesearch

William Luppold; Matthew Bumgardner

2008-01-01

An analysis of hardwood lumber consumption found that demand has changed dramatically over the past four decades as a result of material substitution, changes in construction and remodeling products markets, and globalization. In 1963 furniture producers consumed 36 percent of the hardwood products lumber used by domestic manufacturers. Producers of hardwood...

Low-grade hardwood lumber production, markets, and issues

Treesearch

Dan Cumbo; Robert Smith; Philip A. Araman

2003-01-01

Due to recent downturn in the economy and changes in traditional hardwood markets. U.S. hardwood manufacturers are facing significant difficulties. In particular, markets for low-grade lumber have been diminishing, while increased levels of the material are being produced at hardwood sawmills in the United States. A nationwide survey of hardwood lumber manufacturers...

Determinant Product and Supplier Attributes in Domestic Markets for Hardwood Lumber

Treesearch

Robert J. Bush; Steven A. Sinclair; Philip A. Araman

1991-01-01

Product and supplier attributes that are critical in hardwood lumber purchase decisions (i.e., determinant) were investigated in four segments of the domestic market for hardwood lumber: millwork producers (Standard Industrial Classification (SIC) 2431), hardwood dimension and flooring producers (SIC 2426), wood household furniture producers (SIC 2511), and wood...

Short Lumber: Concept and Acceptance

Treesearch

Janice K. Wiedenbeck

1993-01-01

The primary purpose of this study was to evaluate short length lumber (less than 8 feet long) utilization opportunities within the furniture and cabinet industries. If such a high-value market for short length lumber could be developed, the profit potential for many sawmills would increase and the forest resource management options in many areas would expand. Short...

Relative price trends for hardwood stumpage, sawlogs, and lumber in Ohio

Treesearch

John E. Baumgras; William G. Luppold

1993-01-01

During the 1980's, the hardwood lumber industry experienced a rapidly changing domestic and international hardwood product market. These changes have significantly affected prices of hardwood lumber, and subsequently affected prices of hardwood sawlogs and stumpage. To illustrate these changes, this paper examines deflated prices and price trends for hardwood...

75 FR 30097 - Notice and Request for Comments: Canada-Compliance With Softwood Lumber Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... Lumber Agreement (SLA), Canada agreed to impose export measures on Canadian exports of softwood lumber... bill becomes law by receiving royal assent, and if the Trade Representative finds that the law... On March 4, 2010, the Canadian Parliament introduced as part of the Federal budget an amendment to...

Fire resistance of structural composite lumber products

Treesearch

Robert H. White

2006-01-01

Use of structural composite lumber products is increasing. In applications requiring a fire resistance rating, calculation procedures are used to obtain the fire resistance rating of exposed structural wood products. A critical factor in the calculation procedures is char rate for ASTM E 119 fire exposure. In this study, we tested 14 structural composite lumber...

Life-cycle inventory of manufacturing hardwood lumber in Southeastern US

Treesearch

Richard D. Bergman; Scott A. Bowe

2012-01-01

Environmental impacts associated with the building industry have become of increasing importance. Materials and energy consumed during manufacture of building materials such as lumber affect a building’s environmental performance. This study determined environmental impacts of manufacturing hardwood lumber in the southeastern US using the life-cycle inventory method....

Factors determining lumber recovery in sawmilling

Treesearch

Philip H. Steele

1984-01-01

Lumber volume recovery in sawmilling is determined by a confusing interaction of several factors. The more one knows about each individual factor, the more one can understand how the factors interact. The author identifies and discusses in detail seven factors influencing lumber recovery. Past and current research is cited, and examples are given to illustrate the...

Infrared and colorimetric characterization of discolored kiln-dried hard maple lumber

Treesearch

Benjamin E. Dawson-Andoh; Michael Wiemann; Laurent Matuana; John Baumgras

2004-01-01

Discoloration of hard maple lumber commonly occurs during kiln-drying. In this study, discolored andnondiscolored kiln-dried hard maple lumber boards were characterized using a colorimetric method and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR). Colorimetric measurements (L*, a*, b*) were found to be in good agreement with visual...

Glued structural members

Treesearch

Russell C. Moody; Jen Y. Liu

1999-01-01

Glued structural members are manufactured in a variety of configurations. Structural composite lumber (SCL) products consist of small pieces of wood glued together into sizes common for solid-sawn lumber. Glued-laminated timber (glulam) is an engineered stress-rated product that consists of two or more layers of lumber in which the grain of all layers is oriented...

Prototyping an automated lumber processing system

Treesearch

Powsiri Klinkhachorn; Ravi Kothari; Henry A. Huber; Charles W. McMillin; K. Mukherjee; V. Barnekov

1993-01-01

The Automated Lumber Processing System (ALPS)is a multi-disciplinary continuing effort directed toward increasing the yield obtained from hardwood lumber boards during their process of remanufacture into secondary products (furniture, etc.). ALPS proposes a nondestructive vision system to scan a board for its dimension and the location and expanse of surface defects on...

Boron Diffusion in Surface-Treated Framing Lumber

Treesearch

Patricia K. Lebow; Stan T. Lebow; Steven A. Halverson

2013-01-01

The extent of boron penetration in framing lumber treated by spray applications during construction is not well quantified. This study evaluated the effect of formulation and concentration on diffusion of boron in lumber specimens that were equilibrated in conditions that produced wood moisture contents of 18 to 21 percent. One set of specimens was pressure treated...

Estimating Dermal Transfer of Copper Particles from the Surfaces of Pressure-Treated Lumber and Implications for Exposure

EPA Science Inventory

Lumber pressure-treated with micronized copper was examined for the release of copper and copper micro/nanoparticles using a surface wipe method to simulate dermal transfer. In 2003, the wood industry began replacing CCA treated lumber products for residential use with copper ba...

Match Your Hardwood Lumber to Current Market Needs

Treesearch

Robert J. Bush; Steven A. Sinclair; Philip A. Araman

1990-01-01

This article explains how hardwood lumber producers can best market their product. The study included four segments of the market for hardwood lumber. These segments were: furniture, cabinet, dimension and flooring, and molding/millwork manufacturers. The article explains how the study was conducted and the characteristics of companies (i.e., potential customers) that...

78 FR 67979 - Hardwood Lumber and Hardwood Plywood Promotion, Research and Information Order; Referendum...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

...-11-0074; PR-B] RIN 0581-AD24 Hardwood Lumber and Hardwood Plywood Promotion, Research and Information... whether issuance of a proposed Hardwood Lumber and Hardwood Plywood Promotion, Research and Information... submitted on the Internet at: http://www.regulations.gov or to the Promotion and Economics Division, Fruit...

75 FR 71458 - Cranberry Lumber Company Including Workers of the Following Operating Entities: Butternut One...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... production of green and kiln dried lumber. The workers are not separately identifiable by product line. At... Stafftrak Beckley, WV, Cranberry Lumber Company Including Workers of Greenbrier Forest Products, Inc. Smoot... Cranberry Hardwoods, Inc., in Beckley, West Virginia; Greenbrier Forest Products in Smoot, West Virginia...

Regional analysis of hardwood lumber production: 1963 - 2005

Treesearch

William Luppold; Matthew Bumgardner

2008-01-01

Between 1963 and 2005 hardwood lumber production in the eastern United States increased by more than 50%. Production more than doubled in the northeastern and north central regions while increasing by less than 25% in the southeastern and south central regions. Increased lumber production in the northern regions was facilitated by an expanding sawtimber inventory,...

An examination of the relationships between hardwood lumber and stumpage prices in Ohio

Treesearch

William G. Luppold; Jeffrey P. Prestemon; John E. Baumgras

1998-01-01

Understanding the relationship between hardwood lumber and stumpage prices is critical in evaluating market efficiency and in understanding the potential impact of changing technology on stumpage markets. Unfortunately, the complexity of the hardwood lumber market and lack of reliable data make it difficult to evaluate this relationship using traditional econometric...

Partial cuttings in northern hardwoods of the Lake States: twenty-year experimental results

Treesearch

F. H. Eyre; W. M. Zillgitt

1953-01-01

In the nineteen twenties the hardwood lumber industry of the Lake States faced a critical decision. There was an excess of mill capacity over stumpage available for long-continued operations. Some mills had a limited future; others had enough timber to last them a long time. But all such concerns began to consider what the future held.

Early northern hardwood silvicultural research at the Dukes Experimental Forest, Michigan

Treesearch

Laura S. Kenefic; Christel C. Kern

2015-01-01

Commercial lumber production in the Lake States, which began in the early 1800s with eastern white pine (Pinus strobus L.), shifted to hardwoods in the late 1800s (Whitney 1994). Much of the hardwood forest was rapidly cut over; as a consequence, mill capacity exceeded available stumpage by the 1920s (Eyre and Zillgitt 1953). The forest industry...

Acoustic Evaluation of Thinning and Biosolid Fertilization Effects on Wood Quality of a Douglas-fir stand

Treesearch

Xiping Wang; Robert J. Ross; Steve Verrill; Eini Lowell; Jamie Barbour

2015-01-01

In this study, we examined the potential of using a time-of-flight (TOF) acoustic wave method to evaluate thinning and biosolid fertilization effects on acoustic velocity of trees and modulus of elasticity (MOE) of structural lumber in a 76-year-old Douglas-fir (Pseudotsuga menziesii, (Mirb., Franco)) experimental stand. The stand consisted of four...

Epicormic branching of California black oak: effect of stand and tree characteristics

Treesearch

Philip M. McDonald; Martin W. Ritchie

1994-01-01

Young California black oak (Quercus kelloggii Newb.) stands usually require thinning to increase production of acorns and wood products, but epicormic branches, which yield no acorns and constitute a serious lumber degrade. often result. A crown thinning in 60-year-old hardwood stands on a south exposure at the Challenge Experimental Forest in thenorthern Sierra Nevada...

Sudden oak death online symposium

Treesearch

S.D. Cohen; J., eds Juzwik

2003-01-01

This symposium is being made available to all who have an interest in the recent appearance of Sudden Oak Death, a plant disease with the potential to severely impact nursery growers, shippers, the lumber and wood products industry, landscapers, government programs and others. Scientific presentations dealing with the current status of the disease and ongoing research...

Native American Career Education Unit. From Idea to Product.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

One of twelve instructional units in the Native American Career Education (NACE) program, this unit is intended to help Indian junior high school students understand the steps involved in making a product. Focus is on the subject areas of economics, lumber and furniture industries, and woodworking. The first two activities concern the nature of…

A Forest Products Technology Program for Washington Community Colleges. Final Report.

ERIC Educational Resources Information Center

Grotefend, Robert T.

This report describes a project to develop a forest product technology curriculum that prepares students at the technical level, junior management, to work in the manufacturing of wood and bark into lumber, plywood, particle board, laminates, and pulp chips. Chapter 1 describes project objectives and procedures followed. In chapter 2 the history…

A system for optimal edging and trimming of rough hardwood lumber

Treesearch

Sang-Mook Lee; A. Lynn Abbott; Daniel L. Schmoldt; Philip A. Araman

2003-01-01

Despite the importance of improving lumber processing early in manufacturing, scanning of unplaned, green hardwood lumber has received relatively little attention in the research community. This has been due in part to the difficulty of clearly imaging fresh-cut boards whose fibrous surfaces mask many wood features. This paper describes a prototype system that scans...

Automatic scanning of rough hardwood lumber for edging and trimming

Treesearch

A. Lynn Abbott; Daniel L. Schmoldt; Philip A. Araman; Sang-Mook Lee

2001-01-01

Scanning of unplaned, green hardwood lumber has received relatively little attention in the research community. This has been due in part to the difficulty of clearly imaging fresh-cut boards whose fibrous surfaces mask many wood features. Nevertheless, it is important to improve lumber processing early in the manufacturing stream because much wood material is...

Evolution of allowable stresses in shear for lumber

Treesearch

Robert L. Ethington; William L. Galligan; Henry M. Montrey; Alan D. Freas

1979-01-01

This paper surveys research leading to allowable shear stress parallel to grain for lumber. In early flexure tests of lumber, some pieces failed in shear. The estimated shear stress at time of failure was generally lower than shear strength measured on small, clear, straight-grained specimens. This and other engineering observations gave rise to adjustments that...

Effect of treatment pressure on treatment quality and bending properties of red pine lumber

Treesearch

Patricia K. Lebow; Stan T. Lebow; William J. Nelson

2010-01-01

Although higher treatment pressures have the potential to improve preservative penetration, higher pressures may possibly result in greater reduction in mechanical properties. The present study evaluated the effect of treatment pressure on the treatment quality and mechanical properties of red pine (Pinus resinosa Ait.) lumber. End-matched sections of red pine lumber...

Defect reduction in low-value white oak lumber using restrained drying

Treesearch

Shawn T. Grushecky; Oluwatosin Adedipe; Charlie II Collins; Brian Cox; Colin Dougherty

2008-01-01

Increasing emphasis is being placed on alternative processing methods for low-value hardwoods. Extensive research has shown that drying softwood lumber using edge-wise restraint improves product and value yields. Currently, the effects of restraint drying on product and value yields from low-grade hardwood lumber have not been investigated. We evaluated the use of a...

The pallet industry: a changing hardwood market

Treesearch

G.P. Dempsey; D.G. Martens

1991-01-01

From its inception during World War II, the wooden pallet industry has grown to become the Nation's largest industrial consumer of hardwood lumber products. Since most of the raw material in wooden pallets is lower grade lumber, the pallet industry's growth, efficiency, and changing raw material inputs must be of concern to the grade hardwood lumber industry...

U.S. secondary wood manufacturers are becoming larger – are there implications for hardwood sawmills?

Treesearch

Matthew Bumgardner; Urs Buehlmann; Omar Espinoza

2017-01-01

Previous research has shown that large secondary wood manufacturers request numerous product-related services from their hardwood lumber suppliers. In addition, large secondary manufacturers also source more of their lumber directly from hardwood sawmills than do smaller secondary manufacturers, which tend to purchase more lumber from distributors. Current trends in...

Implementation of a real-time statistical process control system in hardwood sawmills

Treesearch

Timothy M. Young; Brian H. Bond; Jan Wiedenbeck

2007-01-01

Variation in sawmill processes reduces the financial benefit of converting fiber from a log into lumber. Lumber is intentionally oversized during manufacture to allow for sawing variation, shrinkage from drying, and final surfacing. This oversizing of lumber due to sawing variation requires higher operating targets and leads to suboptimal fiber recovery. For more than...

Hardwood sawyer trainer

Treesearch

Luis G. Occeña; Eknarin Santitrakul; Daniel L. Schmoldt

2000-01-01

It is well understood by now that the initial breakdown of hardwood logs into lumber has a tremendous impact on the total lumber value and conversion efficiency. The focus of this research project is the development of a computer-aided sawing trainer tool for the primary breakdown of hardwood logs. Maximum lumber recovery is dependent on the proper log orientation as...

Rough-Part Sizes Needed from Lumber for Manufacturing Furniture and Kitchen Cabinets

Treesearch

Philip A. Araman

1982-01-01

This report summarizes the results from a recent survey of the rough-part sizes needed from lumber for manufacturing furniture and kitchen cabinets. Twenty furniture and twelve cabinet companies participated in the survey. Lumber thicknesses needed and rough-part qualities desired are presented along with distributions describing the required rough-part dimensions....

U.S. hardwood lumber production: 1963 to 2003

Treesearch

William Luppold; Matthew Bumgardner

2008-01-01

Between 1963 and 2003 northern hardwood lumber production more than doubled while production in the southern regions increased by less than 25 percent. In 1963 the major users of hardwood lumber were the furniture manufacturers located in the southeast region, and hardwood flooring producers located in the south central region. By contrast more than 60 percent of the...

The automatic lumber planing mill

Treesearch

Peter Koch

1957-01-01

It is probable that a truly automatic planning operation could be devised if some of the variables commonly present in the mill-run lumber were eliminated and the remaining variables kept under close control. This paper will deal with the more general situation faced by mostl umber manufacturing plants. In other words, it will be assumed that the incoming lumber has...

Metrication of the United States Lumber Industry and Its Effects on Wood Consuming Industrial Education Courses.

ERIC Educational Resources Information Center

Craemer, Peter J.

A study investigated the direction United States lumber industries are moving concerning the implementation of the metric system and what implications this has concerning wood consuming industrial education courses. The procedure included a literature review and investigating the major producers of softwood dimensional lumber by a detailed survey…

Sugar pine utilization: a 30-year transition.

Treesearch

Susan Willits; Thomas D. Fahey

1991-01-01

Utilization standards and measurement systems have changed since the first lumber recovery study was conducted on sugar pine in 1957. These changes prompted a new study to provide new information on lumber volume and value recovery and a comparison to older studies. Lumber volume and value recovery are presented for the recent study on a board- and cubic-foot bases....

Tensile and dimensional properties of wood strands made from plantation southern pine lumber

Treesearch

Qinglin Wu; Zhiyong Cai; Jong N. Lee

2005-01-01

Working stresses and performance of strand composite lumber largely depend upon the properties of each individual strand. Southern pine strands from plantation lumber grown in southern Louisiana were investigated in this study in order to understand strand behaviors. The effects of hot-pressing and resin application on tensile modulus, strength, and dimensional...

Design and operation of a solarheated dry kiln for tropical latitudes

Treesearch

Brian Bond; Omar Espinoza; Philip Araman

2011-01-01

Lumber is usually dried to a specific moisture content prior to further manufacturing or use. While lumber can be air-dried, the ambient humidity in most localities prevents the lumber from reaching the moisture content necessary for dimensional stability and use, especially for interior use. Solar kilns are an inexpensive alternative to conventional steam-heated kilns...

Software analyzes feasibility of saw kerf reduction for hardwood mills

Treesearch

Philip H. Steele

2005-01-01

Reductions in saw kerf on head rigs and resaws can dramatically increase lumber recovery in hardwood sawmills. Research has shown that lumber sawing variation reduction will increase lumber recovery above that obtained solely from kerf reduction. Reductions in sawing machine kerf or variation always come at some cost in both capital and variable costs. Determining...

Lumber stress grades and design properties

Treesearch

David E. Kretschmann; David W. Green

1999-01-01

Lumber sawn from a log, regardless of species and size, is quite variable in mechanical properties. Pieces may differ in strength by several hundred percent. For simplicity and economy in use, pieces of lumber of similar mechanical properties are placed in categories called stress grades, which are characterized by (a) one or more sorting criteria, (b) a set of...

Factors affecting the quality of walnut lumber and veneer

Treesearch

Daniel L. Cassens

2004-01-01

Walnut is a unique species in both its timber and wood characteristics. Although market conditions vary it is generally considered a valuable species. Because of these factors, setting quality (value) levels for both lumber and veneer can be involved. Lumber grades are quantitative thus straight forward once the system is understood. Determining quality in veneer is...

Machine grading of lumber : practical concerns for lumber producers

Treesearch

William L. Galligan; Kent A. McDonald

2000-01-01

Machine lumber grading has been applied in commercial operations in North America since 1963, and research has shown that machine grading can improve the efficient use of wood. However, industry has been reluctant to apply research findings without clear evidence that the change from visual to machine grading will be a profitable one. For instance, mill managers need...

Grade Distribution and Drying Degrade of Sweetgum and Yellow-poplar Structural Lumber

Treesearch

Timothy D. Faust

1990-01-01

The fact that the supply of southern pine timber is changing to include more lower quality plantation stock may provide incentive for utilizing lower density hardwoods for structural lumber. Yellow-poplar and sweetgum are potential substitutes for southern pine. A major problem in utilizing soft hardwoods for structural lumber is the difficulties associated with drying...

Automatic Edging and Trimming of Hardwood Lumber

Treesearch

D. Earl Kline; Eugene M. Wengert; Philip A. Araman

1990-01-01

Studies have shown that there is a potential to increase hardwood lumber value by more than 20 percent through optimum edging and trimming. Even a small portion of this percentage can boost the profitability of hardwood lumber manufacturers substantially. The objective of this research project is to develop an automated system which would assist in correct edging and...

The Dollars and Cents of Conventional Processing of Standard-Size Blanks

Treesearch

Philip A. Araman; Bruce G. Hansen

1983-01-01

Manufacturers of furniture and cabinets normally use over 2 billion board feet of hardwood lumber or about one-third of all hardwood lumber demanded each year. Although the current market for hardwood lumber reflects the overall economic downturn, competition for limited better grade hardwood resources will intensify when the economy improves. So, we need to improve...

Character-marked furniture: potential for lumber yield increase in crosscut-first rough mills

Treesearch

Urs Buehlmann; Janice K. Wiedenbeck; E. Earl Kline; E. Earl Kline

1999-01-01

Including character marks in dimension parts of the furniture, cabinet, and dimension industries offers an opportunity to increase lumber yield substantially. However, little quantitative knowledge exists as to how the incorporation of character marks in parts influences yield when processing lumber in a crosscut-first rough mill. Using computer simulation, this study...

Study of overlength on red oak lumber drying quality and rough mill yield

Treesearch

Brian Bond; Janice Wiedenbeck

2006-01-01

Lumber stacking practices can directly affect drying defects, drying rate, and moisture content uniformity. The effect of overlength on drying is generally thought to be detrimental, yet large volumes of overlength lumber are used by secondary manufacturers. Managers of secondary manufacturing facilities need quantitative information to assist them in determining if...

Predicting yields from Appalachian red oak logs and lumber

Treesearch

Daniel E. Dunmire

1971-01-01

One utilization problem is in pinpointing how to efficiently and effectively recover usable parts from logs, bolts, and lumber. Yields, which are output divided by input, provide a key to managers who make processing decisions. Research results are applied to indicate yields of graded lumber and dimension stock from graded Appalachian red oak (group) logs. How to...

Why do stumpage prices increase more than lumber prices?

Treesearch

William G. Luppold; John E. Baumgras; John E. Baumgras

1998-01-01

Every sawmiller who has been in business more than 5 years realizes that hardwood stumpage prices tend to increase faster than lumber prices, decreasing the margin between these two prices. Although increases in stumpage versus lumber prices are readily apparent, the reason for the decrease in the margin is not. Recent research findings indicate that the stumpage/...

From a contractors perspective: what is needed to recover used CCA treated lumber?

Treesearch

Delton R. Alderman; Robert L. Smith; Philip A. Araman

2003-01-01

The rationale of this research was to discern the factors that currently are preventing contractors from recovering and recycling spent chromated copper arsenate (CCA) lumber. This study examines the effects of evaluations and beliefs, subjective norms, perceived behavioral control, and awareness of the contractor's decision intention to recover used CCA lumber....

A profile of CCA-treated lumber removed from service in the southeastern United States decking market

Treesearch

Delton Alderman; Robert Smith; Philip A. Araman

2003-01-01

This research developed a profile of used chromated copper arsenate (CCA) lumber removed from the demolition of residential decking. This was achieved by gathering and compiling information regarding the construction, demolition, deck remodeling, deck replacement factors, and factors affecting the recovery of spent CCA lumber. In addition, qualitative responses...

Does gang ripping hold the potential for higher clear cutting yields

Treesearch

Hiram Hallock; Pamela Giese

1980-01-01

Cutting yields from gang ripping hardwood lumber graded by the National Hardwood Lumber Association standard grades are determined using the technique of mathematical modeling. The lumber used is the same as that in an earlier mathematically modeled determination of cutting yields from traditional rough mill procedures. Mechanical cutting factors such as kerf, cutting...

Life cycle inventory of oil palm lumber production: A gate-to-gate case study

NASA Astrophysics Data System (ADS)

Shamsudin, Noor Ainna; Sahid, Ismail; Mokhtar, Anis; Muhamad, Halimah; Ahmad, Shamim

2018-04-01

Life Cycle Assessment (LCA) has been applied in the Malaysian oil palm industry since 2010. It is important to ensure that this main industry is ready to meet the demands and expectations of European market on the environmental performance of the oil palm industry. In addition, oil palm biomass, especially oil palm trunk (OPT) are abundantly available after replanting every year. In order to maximize the usage of OPT as a green product, it can be converted to palm lumber as a value-added product. Palm lumber act as a basis product from OPT before it is converted to panel product such as plywood, sandwich board and so on. However, the LCA study on palm lumber production is still scarce in Malaysia. Hence, this paper aims to perform and collect the inventory data for palm lumber production, which is known as Life Cycle Inventory (LCI). A gate-to-gate system boundary and the functional unit of 1 m3 of palm lumber produced have been used in this study. This inventory data was collected from three batches of the production cycle. The inputs are mainly the raw materials which are the OPT and the energy from diesel and electricity from the grid. Generally, each consumption of input such as energy and fossil fuel were different at each stage of palm lumber production. Kiln-drying represents a prominent stage in terms of energy consumption, which electrical use in the dryer represents 94% of total electrical grid consumption as compared to another stage of palm lumber production. By adding the inventory information especially in the downstream sector of biomass industry, hopefully it can improve the sustainability of oil palm industry in Malaysia.

Impact of elliptical shaped red oak logs on lumber grade and volume recovery

Treesearch

Patrick M. Rappold; Brian H. Bond; Janice K. Wiedenbeck; Roncs Ese-Etame

2007-01-01

This research examined the grade and volume of lumber recovered from red oak logs with elliptical shaped cross sections. The volume and grade of lumber recovered from red oak logs with low (e ≤ 0.3) and high (e ≥ 0.4) degrees of ellipticity was measured at four hardwood sawmills. There was no significant difference (...

Green lumber grade yields from factory grade logs of three oak species

Treesearch

Daniel A. Yaussy

1986-01-01

Multivariate regression models were developed to predict green board foot yields for the seven common factory lumber grades processed from white, black, and chestnut oak factory grade logs. These models use the standard log measurements of grade, scaling diameter, log length, and proportion of scaling defect. Any combination of lumber grades (such as 1 Common and...

Potential for yield improvement in combined rip-first and crosscut-first rough mill processing

Treesearch

Ed Thomas; Urs Buehlmann

2016-01-01

Traditionally, lumber cutting systems in rough mills have either first ripped lumber into wide strips and then crosscut the resulting strips into component lengths (rip-first), or first crosscut the lumber into component lengths, then ripped the segments to the required widths (crosscut-first). Each method has its advantages and disadvantages. Crosscut-first typically...

Lumber recovery of Douglas-fir from the Coast and Cascade Ranges of Oregon and Washington.

Treesearch

Susan Willits; Thomas D. Fahey

1988-01-01

This report summarizes the results of lumber recovery studies at four sawmills in western Oregon and western Washington; two dimension mills, one grade mill, and one timber mill were included. Results from individual mills are reported and discussed. The four mills were also combined to approximate "average" conversion of logs to lumber for the region....

Efficient utilization of red maple lumber in glued-laminated timber beams

Treesearch

J. J. Janowiak; H. B. Manbeck; R. Hernandez; R. C. Moody; P. R. Blankenhorn; P. Labosky

The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glued-laminated (glulam) timber. Two red maple beam combinations were evaluated: (1) a glulam combination designed with E-rated lumber in 25 percent of the outer laminations (top and bottom) and No. 3 grade...

Mechanical Performance of Nail-Laminated Posts Manufactured from Reclaimed Chromated Copper Arsenate-Treated Decking Lumber

Treesearch

John J. Janowiak; Robert H. Falk; Brad A. Gething; John A. Tsirigotis

2014-01-01

This study determined the mechanical properties of nail-laminated (nail-lam) posts manufactured from reclaimed chromated copper arsenate (CCA)–treated decking lumber. Though CCA-treated lumber is no longer accepted for use in residential applications, it is permitted in agricultural and industrial applications where health and environmental impacts are deemed to be...

A Multivariate Model and Analysis of Competitive Strategy in the U.S. Hardwood Lumber Industry

Treesearch

Robert J. Bush; Steven A. Sinclair

1991-01-01

Business-level competitive strategy in the hardwood lumber industry was modeled through the identification of strategic groups among large U.S. hardwood lumber producers. Strategy was operationalized using a measure based on the variables developed by Dess and Davis (1984). Factor and cluster analyses were used to define strategic groups along the dimensions of cost...

Wane detection on rough lumber using surface approximation

Treesearch

Sang-Mook Lee; A. Lynn Abbott; Daniel L. Schmoldt

2000-01-01

The initial breakdown of hardwood logs into lumber produces boards with rough surfaces. These boards contain wane (missing wood due to the curved log exterior) that is removed by edge and trim cuts prior to sale. Because hardwood lumber value is determined using a combination of board size and quality, knowledge of wane position and defects is essential for selecting...

Surface shape analysis of rough lumber for wane detection

Treesearch

Sang-Mook Lee; A. Lynn Abbott; Daniel L. Schmoldt

2003-01-01

The initial breakdown of hardwood logs into lumber produces boards with rough surfaces. These boards contain wane (missing wood that emanates from the log exterior, often containing residual bark) that is removed by edge and trim cuts prior to sale. Because hardwood lumber value is determined based on board size and quality, knowledge of wane position and defects is...

Investment opportunity : the FPL EGAR lumber manufacturing system

Treesearch

George B. Harpole; Ed Williston; Hiram H. Hallock

1979-01-01

A model of present-day computer-controlled sawmilling technology is modified for the manufacture of any desired width of EGAR dimension lumber from small logs. EGAR lumber is manufactured via headrig production of 2-inch-thick flitches which are in turn dried, edged full width, edge-glued, and gang-novelty-ripped to wide widths (EGAR). The EGAR system is compared to...

Seasoning small quantities of lumber

Treesearch

E.F. Rasmussen

1965-01-01

The owner of a small quantity of green lumber or logs is often confronted with seasoning it to a state of dryness suitable for use in furniture, wood carving, or other handiwork. He cannot follow the practice of commercial mills, which employ dry kilns for the purpose. because kilns are too costly. On the other hand, air seasoning outdoors usually does not dry lumber...

Feasibility of producing value-added wood products from reclaimed hemlock lumber

Treesearch

John J. Janowiak; Robert H. Falk; Jeffery D. Kimmel

2007-01-01

This study evaluated the feasibility of producing value-added wood products from hemlock lumber salvaged from building deconstruction. About 6,000 board feet of lumber, ranging in size from 3 in. by 8 in. to 3 in. by 12 in., was remilled into four products including log cabin siding, V-groove paneling, beadboard (wainscoting), and tongue and groove flooring. The...

Drying hard maple (Acer saccharum L.) lumber in a small dehumidification kiln

Treesearch

Neal Bennett

2013-01-01

Portable sawmill owners quickly recognize the advantage to kiln drying lumber they produce. Having the ability to provide properly kiln-dried lumber opens new market opportunities and can increase profit margins. However, the construction and operation of a dry kiln must be economical and simple. A small dehumidification dry kiln constructed and tested in Princeton, WV...

Operation and cost of a small dehumidification dry kiln

Treesearch

Richard D. Bergman

2008-01-01

Obtaining small quantities of custom kiln-dried lumber can be an expensive process for an individual woodworker. Building and operating a small kiln capable of drying custom cuts of lumber (such as slabs, bowl blanks) gives woodworkers another option. Our approach was to build and operate a small dehumidification dry kiln. The four charges of lumber ranged from 600 to...

The effect of changes in lumber and furniture prices on wood furniture manufacturers' lumber usage

Treesearch

William G. Luppold

1983-01-01

Wood furniture manufacturers' demands for oak, maple, poplar, open-grain, and close-grain lumber are estimated using cross-sectional, time-series techniques. The analyses indicate that the demand for open-grain species is more price responsive than the demand for close-grain species. The calculated cross-price elasticities indicate that furniture producers do...

Test method for assessing resistance of pine lumber and waferboard to mold

Treesearch

Carol A. Clausen; Michael West

2005-01-01

Methods are needed to evaluate the ability of framing lumber and composite construction materials to withstand mold growth when they are exposed to rain between manufacture and installation. A laboratory-controlled rain chamber was developed to expose biocide-treated specimens of pine lumber and waferboard to bi-weekly wetting followed by re-inoculation with test fungi...

Environmental impact of producing hardwood lumber using life-cycle inventory

Treesearch

Richard D. Bowe Bergman

2008-01-01

Using sustainable building materials is gaining a significant presence in the US. This study examined hardwood lumber manufacturing using life-cycle inventory methodology. Material flow and energy use were identified for hardwood sawmills in northeastern US. A hardwood log volume conversion of 43.7% to planed dry lumber was found. Values of 608 MJ/m3 of electrical and...

Confidence intervals for predicting lumber strength properties based on ratios of percentiles from two Weibull populations.

Treesearch

Richard A. Johnson; James W. Evans; David W. Green

2003-01-01

Ratios of strength properties of lumber are commonly used to calculate property values for standards. Although originally proposed in terms of means, ratios are being applied without regard to position in the distribution. It is now known that lumber strength properties are generally not normally distributed. Therefore, nonparametric methods are often used to derive...

U.S. Policy and Canadian Lumber: Effects of the 1986 Memorandum of Understanding

Treesearch

David N. Wear; Karen J. Lee

1993-01-01

A 1986 Memorandum of Understanding on softwood lumber imports (MOU) between Canada and the United States required that provinvial governments levy export taxes on softwood lumber shipped to the United States. This agreement, with subsequent amendments, influenced trade from 1987 until it was abandoned by Canada in October of 1991. This paper investigates the market...

Drying hardwoods with impinging jets.

Treesearch

Howard N. Rosen

1980-01-01

Silver maple, yellow poplar, and black walnut lumber was dried in a prototype jet dryer over a range of temperatures from 120 degrees to 400 degrees Fahrenheit and air velocities from 1,000 to 9,000 fpm. Different drying schedules were developed for each type of wood. The quality of the jet-dried lumber was good and compared favorably with kiln-dried lumber.

The Pacific Basin market for wood products for military support activities

Treesearch

John D. Zinnikas

1966-01-01

Military support activities in Hawaii use between 50 and 150 thousand board feet of lumber annually for which locally grown and produced hardwood lumber might be used. In addition, the "other Pacific" market uses about 2 million board feet of hard-wood lumber annually. The Pacific Basin can be an important market for the Hawaii timber products industry...

Lumber recovery from ponderosa pine in western Montana.

Treesearch

Marlin E. Plank

1982-01-01

Lumber grade yields and recovery ratios are shown for a sample of ponderosa pine (Pinus ponderosa Dougl. ex Laws.) in western Montana. About 9 percent of the lumber produced was in Select grades, 48 percent in Shop grades, and 43 percent in Common grades. Information on log scale and yield is presented in tables by log grade and diameter class....

Lumber yield and log values of Shasta red fir.

Treesearch

John B. Grantham; Douglas L. Hunt

1963-01-01

The value of lumber produced from each of 362 Shasta red fir logs of southern Oregon was determined through a cooperative study in 1960. Lumber grade yield from each log provided the basis for calculating the comparative value of each log grade-log diameter class, in accordance with grading and scaling practices used both east and west of the...

40 CFR 60.2972 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2012 CFR

2012-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2972 Section 60.2972... PERFORMANCE FOR NEW STATIONARY SOURCES Operator Training and Qualification Air Curtain Incinerators That Burn... incinerators that burn only wood waste, clean lumber, and yard waste? (a) Use Method 9 of appendix A of this...

40 CFR 60.2971 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2012 CFR

2012-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2971 Section 60... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2971 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Within...

40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2014 CFR

2014-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste...

40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2012 CFR

2012-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste...

40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2013 CFR

2013-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste...

Increasing Hardwood Lumber Recovery and Value at the Edger and Trimmer

Treesearch

D. Earl Kline; Philip A. Araman; C. Regalado

1991-01-01

There are over 3500 sawmills producing hardwood lumber in the Southeastern portion of the United States for the household furniture, cabinet, millwork, dimension, and flooring industries as well as for the export market. To stay in business, these sawmills must be able to produce the highest possible value lumber from any given saw log. In these mills, about 20 percent...

A STUDY OF THE LUMBER INDUSTRY IN IDAHO, PART II.

ERIC Educational Resources Information Center

LOUDERMILK, KENNETH M.

A MORE FORMAL STUDY OF THE LUMBER INDUSTRY (SEE VT 002 152 AND VT 002 153) RESULTED IN IMPRESSIONS OF THE WORKERS AND WORKING CONDITIONS. THERE ARE TWO GENERAL TYPES OF EMPLOYEE--(1) THOSE VIEWING LUMBERING AS STOPGAP EMPLOYMENT WHICH SERVES AS A SOURCE OF WAGES FOR EDUCATIONAL PURPOSES OR AS AN INTERIM JOB WHILE BETTER EMPLOYMENT IS SOUGHT, AND…

Hardwood lumber scanning tests to determine NHLA lumber grades

Treesearch

Philip A. Araman; Ssang-Mook Lee; A. Lynn Abbott; Matthew F. Winn

2011-01-01

This paper concerns the scanning, and grading of kiln-dried hardwood lumber. A prototype system is described that uses laser sources and a video camera to scan boards. The system automatically detects defects and wane, grades the boards, and then searches for higher value boards within the original board. The goal is to derive maximum commercial value based on current...

The market for U. S. hardwoods in the United Kingdom: market needs and satisfaction with U. S. Products

Treesearch

Robert J. Bush; Philip A. Araman

1993-01-01

Importers of hardwood lumber in the United Kingdom were studied to determine the product and supplier attributes that most influenced their purchase decisions. Importers of North American hardwoods were least satisfied with Lumber Straightness. Straightness, Absence of Stain and the Absence of Surface Checks were the most important lumber attributes. On Time Shipment...

40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2010 CFR

2010-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste...

40 CFR 60.2971 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2011 CFR

2011-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2971 Section 60... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2971 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Within...

40 CFR 60.3066 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2011 CFR

2011-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3066 Section 60... Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3066 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste...

40 CFR 60.2971 - What are the emission limitations for air curtain incinerators that burn only wood waste, clean...

Code of Federal Regulations, 2010 CFR

2010-07-01

... air curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2971 Section 60... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2971 What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste? (a) Within...

Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

Treesearch

David L. Nicholls; Joseph Roos

2006-01-01

The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

Characterization of Defects in Lumber Using Color, Shape, and Density Information

Treesearch

B.H. Bond; D. Earl Kline; Philip A. Araman

1998-01-01

To help guide the development of multi-sensor machine vision systems for defect detection in lumber, a fundamental understanding of wood defects is needed. The purpose of this research was to advance the basic understanding of defects in lumber by describing them in terms of parameters that can be derived from color and x-ray scanning technologies and to demonstrate...

Lumber use trends in mobile home construction

Treesearch

H. E. Dickerhoof

1977-01-01

The mobile home industry is a large and expanding lumber market within the housing industry. A sturdy wood frame lies under the metal wall and roof skin found on most mobile home units. When compared with data compiled in 1970 (1), the latest Forest Service, Department of Agriculture survey findings indicate the average mobile home now uses much more lumber for framing...

Behavior of an epoxy-polysulfide adhesive in wood joints exposed to moisture content changes

Treesearch

Gordon P. Krueger

1965-01-01

The mechanical behavior of a flexible epoxy-resin adhesive system was observed in joints of plywood to lumber. The joints were subjected to internal swelling stresses caused by an increase in moisture content. Previous experimental work at the U.S. Forest Products Laboratory has shown that this adhesive system acts as a strain-absorbing cushion and thus has a...

Validation of the ROMI-RIP rough mill simulator

Treesearch

Edward R. Thomas; Urs Buehlmann

2002-01-01

The USDA Forest Service's ROMI-RIP rough mill rip-first simulation program is a popular tool for analyzing rough mill conditions, determining more efficient rough mill practices, and finding optimal lumber board cut-up patterns. However, until now, the results generated by ROMI-RIP have not been rigorously compared to those of an actual rough mill. Validating the...

Some implications of remanufacturing hardwood lumber

Treesearch

Charles J. Gatchell; R. Edward Thomas; Elizabeth S. Walker

2000-01-01

Research on several hundred well-manufactured 1 and 2A Common red oak boards shows that better edging and/or trimming or division-based remanufacturing can produce boards of higher grade and value. Division-based remanufacturing divides a board into as many as four smaller boards. The UGRS computer program (3,4) grades digitized boards, examines their remanufacturing...

Lumber and Related Products; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. The primary objective of this course outline is to point out the…

FUTURE PORGRAMS - ART CONCEPTS

NASA Image and Video Library

1986-01-10

S86-25375 (1986) --- (Artist's concept of possible exploration programs.) On Phobos, the innermost moon of Mars and likely location for extraterrestrial resources, a mobile propellant-production plant lumbers across the irregular surface. Using a nuclear reactor the large tower melts into the surface, generating steam which is converted into liquid hydrogen and liquid oxygen. Artwork by Pat Rawlings, of Eagle Engineering, Incorporated.

Tree grades, yields and values for some Appalachian hardwoods

Treesearch

Robert A. Campbell

1951-01-01

Foresters ahve long recognized the need for a better method of appraising standing timber in terms of quality as well as volume of lumber that trees may be expected to produce. Because the range in price between high-grade lumber and low-grade lumber is extremely wide, a stand of high-quality timber is much more valuable than a low-quality stand. In spite of this,...

Quality Characteristics of Appalachian Red Oak Lumber

Treesearch

Janice K Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1995-01-01

Red oak lumber defect information derived from a well-constructed board data bank was analyzed. The potential utility of No. 1 Common and No. 2A Common lumber is indicated by the finding that 23 percent of the No. 1 Common boards and 35 percent of the No. 2A Common boards in the data bank contain clear-face cutting percentages that meet the minimum requirement for the...

Processing mill scale study data on a type 650 electronic machine.

Treesearch

Floyd A. Johnson

1956-01-01

During April 1956, about 20,000 boards from 210 white fir and 290 western hemlock logs were measured at a lumber mill in western Washington. A magnetic drum, data-processing machine (type 650) was then used to calculate board-feet volumes by lumber grade for each log, and average board-foot volumes by lumber grade for each log diameter-class within log grades and...

Softwood lumber prices for evaluation of small diameter timber stands in the Intermountain West.

Treesearch

John T. Chmelik; Roger D. Fight; R. James Barbour

1999-01-01

This paper reports prices for aggregations of lumber grades that are representative of the quality and volume of lumber produced from small-diameter timber stands in the Intermountain West area encompassing Idaho and Montana and land east of the Cascade Mountain range in Oregon and Washington. Price data are reported for Douglas Fir1Larch, Hem1Fir, ponderosa pine, and...

Comparison of nondestructive testing methods for evaluating No. 2 Southern Pine lumber: Part B, modulus of rupture

Treesearch

B.Z. Yang; R.D. Seale; R. Shmulsky; J. Dahlen; X. Wang

2017-01-01

The identification of strength-reducing characteristics that impact modulus of rupture (MOR) is a key differentiation between lumber grades. Because global design values for MOR are at the fifth percentile level and in-grade lumber can be highly variable, it is important that nondestructive evaluation technology be used to better discern the potential wood strength. In...

Ponderosa pine lumber recovery in Lakeview, Oregon area.

Treesearch

E.E. Matson

1955-01-01

During January 1955, a study was made at the American Forest Products Corporation mill in Lakeview, Oregon, to determine the grades of lumber that can be expected from ponderosa pine timber grown in the Lakeview area of Oregon. All logs cut for a full week at this mill were scaled and graded and all the lumber produced was graded and tallied on the green chain by...

The "great" price spike of '93: an analysis of lumber and stumpage prices in the Pacific Northwest.

Treesearch

Brent L. Sohngen; Richard W. Haynes

1994-01-01

Lumber prices for coast Douglas-fir (Psuedotsuga menziesii (Mirb.) Franco var. menziesii) swung rapidly from a low of $306 per thousand board feet (MBF) in September 1992 to a high of $495/MBF in March 1993. This price spike represented a sizable increase in the value of lumber over a short period, but it was not the historical...

Manufacturing Hardwood Dimension Products Directly from Logs: Potential Opportunities

Treesearch

D. Earl Kline; Wenjie Lin; Philip A. Araman

1993-01-01

When a hardwood log is sawn into lumber, over 16 percent of the volume is converted to sawdust. Furthermore, 12 percent of the log is converted to slabs and 17 percent is converted to edging and trimming pieces, all of which are chipped. Hence, less than 55 percent of the log is actually converted to lumber. Lumber must meet the requirements of specific NHLA grades and...

The changing structure of the hardwood lumber industry with implications on technology adaptation

Treesearch

William Luppold; John Baumgras; John Baumgras

2000-01-01

The hardwood sawmilling industry has been changing over the last 50 years as a result of changes in hardwood sawtimber inventory and in the demand for hardwood lumber. In 1950 the industry was composed of numerous individual mills, few of which produced more than 3 million board feet of lumber annually. During this time the furniture industry was the major user of...

Federal timber restrictions, interregional spillovers, and the impact on US softwood markets

Treesearch

David N. Wear; Brian C. Murray

2004-01-01

An econometric model of the US softwood lumber and timber markets is estimated and used to simulate the price, trade, and welfare effects of reductions in federal timber sales in the western US commencing in the late 1980s. Results indicate that the timber sale reductions increased lumber prices by roughly 15 percent in the mid-1990s. Lumber consumers were the...

International trade of U.S. hardwood lumber and logs, 1990-2013

Treesearch

William G. Luppold; Matthew S. Bumgardner

2014-01-01

United States (U.S.) hardwood log and lumber exports surged in the early- and mid-1970s in response to the adoption of floating exchange rates. However, assessing these changes in international trade became difficult in the 1980s due to increased underreporting of hardwood lumber and log shipments between the U.S. and Canada. By 1990, these data problems were rectified...

Hardwood lumber and stumpage prices in two eastern hardwood markets: The real story

Treesearch

Neal P. Kingsley; Paul S. DeBald; Paul S. DeBald

1987-01-01

Current and real prices of hardwood lumber and stumpage prices are discussed. Results show that inflation wiped out most of the apparent price increases in two major hardwood lumber markets. Stumpage prices also failed to increase in real terms for most species in Ohio. Current and real prices trends for eight major eastern species are shown for the period 1964 through...

Lumber recovery from young-growth red and white fir in northern California.

Treesearch

W.Y. Pong

1982-01-01

Lumber recovery data from 1,106 logs from 341 young-growth white fir (Abies concolor (Gord. & Glend.) Lindl. ex Hildebr.) and red fir (A. magnifica A. Murr) trees are presented. All logs were processed through a quad-band headsaw. Nominal 2x4's and 2x6's made up over 93 percent of the lumber volume; nearly 70...

Examination of lumber price trends for major hardwood species

Treesearch

William G. Luppold; Matthew S. Bumgardner

2007-01-01

Over the last 40 years, trends in interspecies and intergrade hardwood lumber prices have been erratic. In the early 1960s, high- and midgrade hard maple commanded high prices while red oak was the least valuable lumber regardless of grade. In the 1980s, high- and midgrade oak prices surged, but prices of all grades of maple and yellow-poplar declined. During the 1990s...

Employment changes in U.S. hardwood lumber consuming industries during economic expansions and contractions since 1991

Treesearch

William G. Luppold; Matt Bumgardner

2016-01-01

Understanding employment trends is important for discerning the economic vitality of U.S. hardwood lumber users. After a period of growth in the 1990s, employment in industries consuming hardwood lumber has declined in the 21st century. The wood household furniture industry has experienced the greatest decline, with North Carolina, Virginia, and California being the...

Rough Mill Simulations Reveal That Productivity When Processing Short Lumber Can Be High

Treesearch

Janice K. Wiedenbeck; Philip A. Araman

1995-01-01

Handling rates and costs associated with using short-length lumber (less than 8 ft. long) in furniture and cabinet industry rough mills have been assumed to be prohibitive. Discrete-event systems simulation models of both a crosscut-first and gang-rip-first rough mill were built to measure the effect of lumber length on equipment utilization and the volume and value of...

Potential sources of variation that influence the final moisture content of kiln-dried hardwood lumber

Treesearch

Hongmei Gu; Timothy M. Young; William W. Moschler; Brian H. Bond

2004-01-01

Excessive variability in the final moisture content (MC) of hardwood lumber may have a significant impact on secondary wood processing and final product performance. Sources of final MC variation during kiln- drying have been studied in prior research. A test examining the final MC of red oak (Quercus spp.) and yellow-poplar (Liriodendron tulipifera) lumber after kiln-...

Method for estimating air-drying times of lumber

Treesearch

William T. Simpson; C. Arthur Hart

2001-01-01

Published information on estimated air-drying times of lumber is of limited usefulness because it is restricted to a specific location or to the time of year the lumber is stacked for drying. At best, these estimates give a wide range of possible times over a broad range of possible locations and stacking dates. In this paper, we describe a method for estimating air-...

Statistical models for the distribution of modulus of elasticity and modulus of rupture in lumber with implications for reliability calculations

Treesearch

Steve P. Verrill; Frank C. Owens; David E. Kretschmann; Rubin Shmulsky

2017-01-01

It is common practice to assume that a two-parameter Weibull probability distribution is suitable for modeling lumber properties. Verrill and co-workers demonstrated theoretically and empirically that the modulus of rupture (MOR) distribution of visually graded or machine stress rated (MSR) lumber is not distributed as a Weibull. Instead, the tails of the MOR...

Wood-framed building deconstruction : a source of lumber for construction?

Treesearch

Bob Falk

2002-01-01

The sounds are much like those found at any building site. Hammers pounding. Saws whining. Lumber in motion. However, everything here seems to be in reverse ... windows and doors are being unhung rather than set in place, nails are being pounded out of boards instead of into them, lumber is being stacked up, banded, and hauled away rather than delivered and unstacked....

The state of hardwood lumber markets

Treesearch

Gilbert P. Dempsey; William G. Luppold

1992-01-01

Although the 1990-91 recession has temporarily dampened the demand for hardwood lumber, the decade of the 1980s was a period of strong growth in the hardwood market. After experiencing a flat market in 1980 and a decline in 1982, the demand for hardwood lumber by both the domestic industry and the export market increased strongly—from 8 billion board feet in 1982 to 11...

The international hardwood lumber market and potential impacts on your bottom line

Treesearch

Bill Luppold; Matthew Bumgardner

2014-01-01

Even if you don't sell logs or lumber to foreign customers, the international hardwood market can impact your business in significant ways, and smart business leaders are taking notice so that they are ready for shifting market impacts. Many people believe that lumber exporting is only an opportunity for larger sawmills. However, even if you have a portable mill...

Lumber and plywood used in California apartment construction, 1969

Treesearch

George B. Harpole

1973-01-01

The volume of lumber and plywood products used in apartment construction in California was estimated from a sample of apartments for which architectural plans were completed in 1969. Excluding wood mouldings, doors, cabinets, and shelving, an average of 4.85 board feet of lumber and 2.03 square feet (318-inch basis) of plywood per square foot of floor area were used in...

Lumber recovery from Douglas-fir thinnings at a bandmill and two chipping canters.

Treesearch

Thomas D. Fahey; Douglas L. Hunt

1972-01-01

Trees cut in thinning of Douglas-fir stands were processed into lumber at a profiled cant chipper, a square cant chipper with resaw, and a bandmill. Results are reported in terms of both cubic feet and Scribner long log scale. Included are tables by log input by diameter class for three studies, recovery by lumber grade and dimension item for three...

40 CFR 60.2972 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2013 CFR

2013-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2972 Section 60.2972... Commenced on or After June 16, 2006 Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2972 How must I monitor opacity for air curtain incinerators that burn only wood waste...

40 CFR 60.2974 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2012 CFR

2012-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... and Qualification Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 60.2972 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Code of Federal Regulations, 2014 CFR

2014-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.2972 Section 60.2972... Commenced on or After June 16, 2006 Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2972 How must I monitor opacity for air curtain incinerators that burn only wood waste...

40 CFR 60.3069 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2013 CFR

2013-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 60.3069 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2014 CFR

2014-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 60.3069 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2012 CFR

2012-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 62.14815 - What are the emission limitations for air curtain incinerators that burn 100 percent wood wastes...

Code of Federal Regulations, 2011 CFR

2011-07-01

... air curtain incinerators that burn 100 percent wood wastes, clean lumber and/or yard waste? 62.14815... Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or... percent wood wastes, clean lumber and/or yard waste? (a) After the date the initial test for opacity is...

40 CFR 60.3069 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2010 CFR

2010-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 60.2974 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2011 CFR

2011-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... and Qualification Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 62.14815 - What are the emission limitations for air curtain incinerators that burn 100 percent wood wastes...

Code of Federal Regulations, 2010 CFR

2010-07-01

... air curtain incinerators that burn 100 percent wood wastes, clean lumber and/or yard waste? 62.14815... Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or... percent wood wastes, clean lumber and/or yard waste? (a) After the date the initial test for opacity is...

40 CFR 62.14820 - How must I monitor opacity for air curtain incinerators that burn 100 percent wood wastes, clean...

Code of Federal Regulations, 2010 CFR

2010-07-01

... curtain incinerators that burn 100 percent wood wastes, clean lumber, and/or yard waste? 62.14820 Section... Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or... wood wastes, clean lumber, and/or yard waste? (a) Use Method 9 of 40 CFR part 60, Appendix A to...

40 CFR 60.3069 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2011 CFR

2011-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 60.2974 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2010 CFR

2010-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... and Qualification Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste... incinerator that burns only wood waste, clean lumber, and yard waste? Yes, if your air curtain incinerator is...

40 CFR 62.14820 - How must I monitor opacity for air curtain incinerators that burn 100 percent wood wastes, clean...

Code of Federal Regulations, 2011 CFR

2011-07-01

... curtain incinerators that burn 100 percent wood wastes, clean lumber, and/or yard waste? 62.14820 Section... Before November 30, 1999 Air Curtain Incinerators That Burn 100 Percent Wood Wastes, Clean Lumber And/or... wood wastes, clean lumber, and/or yard waste? (a) Use Method 9 of 40 CFR part 60, Appendix A to...

An analysis of declines in hardwood lumber price of the past 40 years

Treesearch

William G. Luppold; Matthew S. Bumgardner

2010-01-01

Over the last 40 years, hardwood lumber prices have fluctuated as a result of overall economic activity and periodic inventory adjustment. Still, the decline in price for major hardwood species that began in the spring of 2004 and continued until the summer of 2009 is by far the most significant. In this article, we will examine just how much hardwood lumber prices...

29 CFR 570.54 - Forest fire fighting and forest fire prevention occupations, timber tract occupations, forestry...

Code of Federal Regulations, 2011 CFR

2011-07-01

....34(m) and 570.54(c): (i) Straightening, marking, or tallying lumber on the dry chain or the dry drop sorter. (ii) Pulling lumber from the dry chain, except minors under 16 years of age may not pull lumber from the dry chain as such youth are prohibited from operating or tending power-driven machinery by...

29 CFR 570.54 - Forest fire fighting and forest fire prevention occupations, timber tract occupations, forestry...

Code of Federal Regulations, 2013 CFR

2013-07-01

....34(m) and 570.54(c): (i) Straightening, marking, or tallying lumber on the dry chain or the dry drop sorter. (ii) Pulling lumber from the dry chain, except minors under 16 years of age may not pull lumber from the dry chain as such youth are prohibited from operating or tending power-driven machinery by...

29 CFR 570.54 - Forest fire fighting and forest fire prevention occupations, timber tract occupations, forestry...

Code of Federal Regulations, 2012 CFR

2012-07-01

....34(m) and 570.54(c): (i) Straightening, marking, or tallying lumber on the dry chain or the dry drop sorter. (ii) Pulling lumber from the dry chain, except minors under 16 years of age may not pull lumber from the dry chain as such youth are prohibited from operating or tending power-driven machinery by...

29 CFR 570.54 - Forest fire fighting and forest fire prevention occupations, timber tract occupations, forestry...

Code of Federal Regulations, 2014 CFR

2014-07-01

....34(m) and 570.54(c): (i) Straightening, marking, or tallying lumber on the dry chain or the dry drop sorter. (ii) Pulling lumber from the dry chain, except minors under 16 years of age may not pull lumber from the dry chain as such youth are prohibited from operating or tending power-driven machinery by...

Long-Term Exposure of Tropical Soils to Pressure Treated Lumber, Barro Colorado Island, Panama: Impacts on Soil Metal Mobility and Microbial Community Structure

NASA Astrophysics Data System (ADS)

Marietta, M. L.; Fowle, D. A.; Roberts, J. A.

2008-12-01

Pressure treated lumber (CCA) has been used in a variety of structures for over seven decades, but recent concerns have been raised about leaching of metals such as chromium (Cr) and arsenic (As) into proximal soils and water supplies. Pressure treated lumber abundance and its continued use necessitate a thorough understanding of metal release and sequestration in the subsurface. To date, no long-term, in situ study on the migration of CCA compounds from lumber has been performed. Barro Colorado Island, Panama is the site of several previous CCA studies and provides an opportunity to investigate the long-term (>70 years) effects of pressure treated lumber in oxisols, where high rainfall and warm temperatures may represent an end-member condition for the leaching and mobility of these metals. Soil samples from CCA and control sites were measured for Cr, As, Cu, Zn, and Fe abundances, microbial biomass and community structure via phospholipid fatty acid analysis, along with basic soil properties. CCA lumber samples were also characterized for their metal abundance. Lumber treated with zinc meta-arsenite displayed advanced decay with elevated As, Cu, and Zn concentrations observed in the adjacent soil. Increased soil organic matter and microbial biomass correlate to decreases in Fe and Fe-associated metals compared to the control. High As concentrations persist to <1 m of the source. Lumber treated with potassium dichromate contained high chromium concentrations and displayed little decay, however, soil concentrations of Cr, Fe, and Cu were generally less than control soils. Over these same intervals, soil organic matter and microbial biomass increased, particularly the fraction of metal reducing bacteria (MRB). We hypothesize that organic carbon loading from lumber stimulates MRB, leading to mobilization of Fe and Fe-associated metals from these oxide-rich soils. Principal component analysis of PLFA data confirms a distinction between controls and samples with elevated metal abundance at each site. This study provides fundamental insight into the long-term persistence of CCA compounds in Fe-rich soils and could serve in practical applications related to CCA contamination.

Impact of technical and technological changes on energy efficiency of production company - case study

NASA Astrophysics Data System (ADS)

Szwedzka, K.; Gruszka, J.; Szafer, P.

2016-08-01

Improving energy efficiency is one of the strategic objectives of the European Union for rational energy economy. To make efforts to improve energy efficiency have been obliged both small and large end-users. This article aims to show the possibilities of improving energy efficiency by introducing technical and technological process changes of pine lumber drying. The object of the research is process of drying lumber implemented in a production company, which is a key supplier of large furniture manufacturer. Pine lumber drying chamber consume about 45% of total electricity in sawmill. According to various sources, drying of 1m3 of lumber uses about 3060kWh and is dependent of inter alia: the drying process itself, the factors affecting the processing time and the desired output moisture content of the timber. The article proposals for changes in the process of drying lumber pine have been positively validated in the company, and as a result their energy consumption per 1 m3 of product declined by 18%.

JBFA - buoyant flight

NASA Technical Reports Server (NTRS)

Ohari, T.

1982-01-01

A method was developed whereby a balloon was used to carry lumber out of a forest in order to continue lumber production without destroying the natural environment and view of the forest. Emphasis was on the best shape for a logging balloon, development of a balloon logging system suitable for cutting lumber and safety plans, tests on balloon construction and development of netting, and weather of mountainous areas, especially solutions to problems caused by winds.

To Make Long Character-Marked Cuttings From Low-Grade Yellow-Poplar Lumber - Rip First

Treesearch

Philip A. Araman

1979-01-01

Long, character-marked furniture cuttings are easily obtained when low-grade (2A and 2B Common) yellow-poplar lumber is first ripped into strips and then crosscut to remove objectionable defects. Overall yields of character-marked material using this procedure were 78% from 1 Common and 2A Common and 70% from 2B Common yellow-poplar lumber. Furthermore, 82% of the 1...

The influence of cutting-bill requirements on lumber yield using a fractional-factorial design part II, correlation and number of part sizes

Treesearch

Urs Buehlmann; D. Earl Kline; Janice K. Wiedenbeck; R., Jr. Noble

2008-01-01

Cutting-bill requirements, among other factors, influence the yield obtained when cutting lumber into parts. The first part of this 2-part series described how different cutting-bill part sizes, when added to an existing cutting-bill, affect lumber yield, and quantified these observations. To accomplish this, the study employed linear least squares estimation technique...

Comparison of Nondestructive Testing Methods for Evaluating No. 2 Southern Pine Lumber: Part A, Modulus of Elasticity

Treesearch

B.Z. Yang; R.D. Seale; R. Shmulsky; J. Dahlen; Xiping Wang

2015-01-01

Modulus of elasticity (MOE, or E) is one of the main quality indicators in structural lumber stress grading systems. Due to a relatively high amount of variability in contemporary sawn lumber, it is important that nondestructive evaluation technology be utilized to better discern high-E-value pieces from low-E-value pieces. The research described in this study is from...

Factors influencing changes in U.S. hardwood log and lumber exports from 1990 to 2011. BioResources

Treesearch

William G. Luppold; Matthew S. Bumgardner

2013-01-01

Domestic consumption of hardwood products in the United States since 2000 has trended downward, making exports the single most important market for higher grade hardwood lumber and a major market for higher value hardwood logs. Between 1990 and 2011, hardwood lumber exports increased by 46%. During most of this period, Canada was the largest export market for U.S....

Reconsidering price projections for selected grades of Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber.

Treesearch

Richard W. Haynes; Roger D. Fight

2004-01-01

Grade-specific price projections were once again developed for Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber. These grade-specific price projections can be used to demonstrate the returns to land management of practices that lead to high-quality logs that produce a larger proportion of high grades of lumber. The price ratios among low, medium,...

Effect of cross grain on stress waves in lumber

Treesearch

C.C. Gerhards

1980-01-01

An evaluation is made of the effect of cross grain on the transit time of longitudinal compression stress waves in Douglas-fir 2 by 8 lumber. Cross grain causes the stress wave to advance with a front or contour skewed in the direction of the grain angle, rather than to advance with a front normal to the long axis of lumber. Thus, the timing of the stress wave in...

Long length cuttings from no. 2 common hardwood lumber

Treesearch

Edwin L. Lucas; Edwin L. Lucas

1973-01-01

Long length cuttings (up to 60 inches) are obtainable in abundance from No. 2 Common oak lumber. Cutting for the maximum area of clear one face (ClF) parts 18 to 60 inches in length, we found that 46 percent of all the cuttings were 36 inches long or longer. The recovery of the long length cuttings did not reduce the overall yield of parts produced from the lumber....

Effects of Market Prices and Silvicultural Practices on Lumber Value of Standing Trees In Uneven-Ages Plots

Treesearch

David W. Patterson

1998-01-01

Uneven-aged management plots were established using three variables (site index, basal area, and maximum diameter). This study looked at the significance of the variables on the lumber volume per acre, lumber value per thousand board feet (Mbf), and stand value per acre as well as the influence on these analysis by market prices (May 1997, May 1998, and October 1998)....

Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

Treesearch

Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

2006-01-01

Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

Kiln drying lumber in the United States : a survey of volume, species, kiln capacity, equipment, and procedures, 1992-1993

Treesearch

Robert W. Rice; Jeffrey L. Howe; R. Sidney Boone; John L. Tschernitz

1994-01-01

A survey was conducted of primary and secondary manufacturing firms that have at least one dry kiln and process approximately 2 million board feet or more of lumber annually. More than 1,500 surveys were completed, representing manufacturers in 43 states. According to survey respondents, approximately 5 billion board feet of hardwood lumber and 24 billion board feet of...

Market for Hawaii hardwood lumber in new single-family houses on Oahu, Hawaii

Treesearch

John D. Zinnikas; R. Sidney Boone

1967-01-01

The total potential market for flooring, siding, and cabinet and millwork in new single-family houses on Oahu was between 10½ and 11 million board feet of lumber in 1963. The total possible market for lumber in new single-family house construction from 1965 to 1970 is estimated at 18 to 23 million square feet of floor-ing, 28 to 36 million square feet of...

40 CFR 60.2974 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2014 CFR

2014-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2974 Am I required to apply for and obtain a title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber...

40 CFR 60.2974 - Am I required to apply for and obtain a title V operating permit for my air curtain incinerator...

Code of Federal Regulations, 2013 CFR

2013-07-01

... title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and... Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.2974 Am I required to apply for and obtain a title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber...

Assessing the release of copper from nanocopper-treated and conventional copper-treated lumber into marine waters I: Concentrations and rates.

PubMed

Parks, Ashley N; Cantwell, Mark G; Katz, David R; Cashman, Michaela A; Luxton, Todd P; Ho, Kay T; Burgess, Robert M

2018-03-25

Little is known about the release of metal engineered nanomaterials (ENMs) from consumer goods, including lumber treated with micronized copper. Micronized copper is a recent form of antifouling wood preservative containing nanosized copper particles for use in pressure-treated lumber. The present study investigated the concentrations released and the release rate of total copper over the course of 133 d under freshwater, estuarine, and marine salinity conditions (0, 1, 10, and 30‰) for several commercially available pressure-treated lumbers: micronized copper azole (MCA) at 0.96 and 2.4 kg/m 3 , alkaline copper quaternary (ACQ) at 0.30 and 9.6 kg/m 3 , and chromated copper arsenate (CCA) at 40 kg/m 3 . Lumber was tested as blocks and as sawdust. Overall, copper was released from all treated lumber samples. Under leaching conditions, total release ranged from 2 to 55% of the measured copper originally in the lumber, with release rate constants from the blocks of 0.03 to 2.71 (units per day). Generally, measured release and modeled equilibrium concentrations were significantly higher in the estuarine conditions compared with freshwater or marine salinities, whereas rate constants showed very limited differences between salinities. Furthermore, organic carbon was released during the leaching and demonstrated a significant relationship with released copper concentrations as a function of salinity. The results indicate that copper is released into estuarine/marine waters from multiple wood treatments including lumber amended with nanoparticle-sized copper. Environ Toxicol Chem 2018;9999:1-13. Published 2018 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America. Published 2018 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.

Overstory species composition, structure, and conservation challenges of a mature, natural-origin pine stand after decades of management

Treesearch

Don C. Bragg

2016-01-01

This study provides a preliminary assessment of 4 compartments on the Crossett Experimental Forest (CEF) being restored to old-growth-like conditions. After being partially cleared for agriculture or lumbered in the late 1910s, Compartments 1, 2, 11, and 12 were included in a combination of pulpwood-thinning and uneven-aged cutting-cycle studies for the next 50 y....

Management of ponderosa pine in the Southwest: As developed by research and experimental practice

Treesearch

G. A. Pearson

1950-01-01

Ponderosa pine (Pinus ponderosa) is the most widely distributed conifer in North America, and one of the most valuable. Commercial stands of the species are found in all of the 15 States which lie wholly or in part west of the 102d merinian, and in all but one it rank among the most important lumber producers. In the Southwest, ponderosa pine is of particular...

Evaluation of a reduced section modulus model for determining effects of incising on bending strength and stiffness of structural lumber

Treesearch

Roland Hernandez; Jerrold E. Winandy

2005-01-01

A quantitative model is presented for evaluating the effects of incising on the bending strength and stiffness of structural dimension lumber. This model is based on the premise that bending strength and stiffness are reduced when lumber is incised, and the extent of this reduction is related to the reduction in moment of inertia of the bending members. Measurements of...

Effect of curve sawing on lumber recovery and warp of short cherry logs containing sweep

Treesearch

Brian H. Bond; Philip Araman

2008-01-01

It has been estimated that approximately one-third of hardwood sawlogs have a significant amount of sweep and that 7 to nearly 40 percent of the yield is lost from logs that have greater than 1 inch of sweep. While decreased yield is important, for hardwood logs the loss of lumber value is likely more significant. A method that produced lumber while accounting for log...

Review on antibacterial biocomposites of structural laminated veneer lumber

PubMed Central

Chen, Zi-xiang; Lei, Qiong; He, Rui-lin; Zhang, Zhong-feng; Chowdhury, Ahmed Jalal Khan

2015-01-01

In this review, the characteristics and applications of structural laminated veneer lumber made from planted forest wood is introduced, and its preparation is explained, including various tree species and slab qualities, treatments for multiple effects and reinforced composites. The relevant factors in the bonding technology and pressing processes as well as the mechanical properties, research direction and application prospects of structural laminated veneer lumber made from planted forest wood are discussed. PMID:26858559

Political pressure: An examination of U S Senators actions in restricting Canadian softwood lumber imports

Treesearch

Joseph Godwin; Daowei Zhang

2012-01-01

Over the past 30 years the U.S.–Canadian softwood lumber trade dispute has resulted in three managed trade agreements that have not been voted on in the U.S. Congress. Nevertheless, U.S. Senators have played an important role in shaping the political environment that has nurtured these agreements. In this paper we construct a lumber influence index based on 14 known...

Improved utilization of small-diameter ponderosa pine in glulam timber

Treesearch

Roland Hernandez; David W. Green; David E. Kretschmann; Steven P. Verrill

2005-01-01

This study involved the evaluation of ponderosa pine glulam made from lumber that was sawn from a small-diameter timber resource. Two different glulam beam depths were evaluated: 8 and 13 laminations. A comprehensive glulam test program was conducted to evaluate edgewise and flat-wise bending, shear, and tensile strength. Beam deflection was measured and a variety of...

Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

Treesearch

Philip A. Araman

1977-01-01

The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

Development of a 3D log sawing optimization system for small sawmills in central Appalachia, US

Treesearch

Wenshu Lin; Jingxin Wang; Edward Thomas

2011-01-01

A 3D log sawing optimization system was developed to perform log generation, opening face determination, sawing simulation, and lumber grading using 3D modeling techniques. Heuristic and dynamic programming algorithms were used to determine opening face and grade sawing optimization. Positions and shapes of internal log defects were predicted using a model developed by...

Lumber values from computerized simulation of hardwood log sawing

Treesearch

D.B. Richards; W.K. Adkins; H. Hallock; E.H. Bulgrin

1980-01-01

Computer simulation sawing programs were used to study the sawing of mathematical models of hardwood logs by me live sawing and three 4-sided sawing methods. One of the 4-sided methods simulated "grade sawing" by sawing each successive board from the log face with the highest potential grade. Logs from 10 through 28 inches in diameter were sawn. In addition,...

Global Markets and the Health of American Forests: A Forest Service Perspective

Treesearch

Sally Collins; David Darr; David Wear; Hutch Brown

2008-01-01

The United States is rich in forests, yet about 39% of the softwood lumber used by Americans in 2005 came from other countries (WWPA 2006). In fact, the United States has not been “self-sufficient” in lumber (with exports exceeding imports) for more than 40 years. According to Haynes et al. (2007), the trade deficit in lumber has grown from 4.1 billion board feet (bbf...

Duplicate Class IV (Lumber) Ordering Within Defense Logistics Agency and Its Impact in Each Combatant Command

DTIC Science & Technology

2015-12-01

this vignette, the assumption is that all processes occur as they are designed with no variability, and that all lumber supply stocks have been...is available, then SGT Doe, or a designated command representative, can pick up the lumber at the SSA using a manual paper form, conducting a process...requested by SGT Doe’s order, then a new government contract is solicited after the designated contract administration service (CAS) approves the request

Continuous tunnel kiln direct-fired with bark to dry 1.75-inch southern pine in 12 hours.

Treesearch

P. Koch; W.L. Wellford

1977-01-01

Length-sorted lumber is surfaced on one side to 1.75-inch thickness, mechanically stacked 5 feet wide and 10 feet high on 1-1/4-inch-thick sticks, and continuously transported through a zone-controlled tunnel kiln at 8 ft./hr. to yield 500,000 fbm of lumber dried to 9 percent average MC per 168-hour week. In the tunnel, the lumber is dried for 8 (possibly 10) hours at...

Continuous tunnel kiln direct-fired with bark to dry 1.75-inch southern pine in 12 hours

Treesearch

Peter Koch; Walker L. Wellford

1976-01-01

Length-sorted lumber is surfaced on one side to 1.75-inch thickness, mechanically stacked 5 feet wide and 10 feet high on 1-1/4-inch-thick sticks, and continuously transported through a zone-controlled tunnel kiln at 8 ft./hr. to yield 500,000 fbm of lumber dried to 9 percent average MC per 168-hour week. In the tunnel, the lumber is dried for 8 (possibly 10) hours of...

A comprehensive defect data bank for no. 2 common oak lumber

Treesearch

Edwin L. Lucas; Leathern R.R. Catron; Leathern R.R. Catron

1973-01-01

Computer simulation of rough mill cut-up operations allows lowcost evaluation of furniture rough mill cut-up procedures. The defect data bank serves as input to such simulation programs. The data bank contains a detailed accounting of defect data taken from 637 No. 2 Common oak boards. Included is a description of each defect (location, size, and type), as well as the...

Development of a computer method for predicting lumber cutting yields.

Treesearch

Daniel E. Dunmire; George H. Englerth

1967-01-01

A system of locating defects in a board by intersecting coordinate points was developed and a computer program devised that used these points to locate all possible clear areas in the board. The computer determined the yields by placing any given size or sizes of cuttings in these clear areas, and furthermore stated the type, location, and number of saw cuts. The...

Cooperative advanced-generation breeding and testing of coastal Douglas-fir and western hemlock—strategy and implementation.

Treesearch

K. J.S. Jayawickrama; G.R. Johnson; T. Ye

2005-01-01

As in many temperate regions of the world, forest tree improvement got underway in the Pacific Northwest of the USA in the 1950s, with a number of companies and agencies starting independent tree improvement programs. Booth-Kelly Lumber Co., Crown Zellerbach Corp., the Industrial Forestry Association, Port Blakely Mill Co., Simpson Timber Co., Timber Service Co., the...

Field performance of timber bridges. 10, Sanborn Brook stress-laminated deck bridge

Treesearch

P. D. Hilbrich Lee; J. P. Wacker; M. A. Ritter

The Sanborn Brook bridge was constructed in August 1991, 10 miles northeast of Concord, New Hampshire, as part of the demonstration timber bridge program of the USDA Forest Service. The bridge is a simple-span, double-lane, stress-laminated deck superstructure constructed from Southern Pine lumber and is approximately 25 ft long and 28 ft wide with a skew of 14 degrees...

Pierce Lumber, Inc.

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Low VOC drying of lumber and wood panel products. Progress report Number 9 [January 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yan, H.; Banerjee, S.; Conners, T.

1999-01-01

Results from a multi-year study show that a significant part of the extensive variability observed in oriented strand board (OSB) flake dryer emissions can be traced to physiological effects, and the rest can be attributed to handling and other factors. Low-headspace treatment of lumber was scaled up to the 50 kg level. The amount of turpentine collected was of the same magnitude as that released upon drying lumber. For the process to be economical, the wood must first be brought to about 95 C with steam, and then processed with RF. Attempts to remove VOCs from OSB through low-headspace bymore » placing a curtain over the wood failed because of leaks. A more rigid container will be required. RF-treatment does not alter the gas permeability of lumber.« less

Low VOC drying of lumber and wood panel products. Progress report Number 9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yan, H.; Banerjee, S.; Conners, T.

1999-01-01

Results from a multi-year study show that a significant part of the extensive variability observed in oriented strand board (OSB) flake dryer emissions can be traced to physiological effects, and the rest can be attributed to handling and other factors. Low-headspace treatment of lumber was scaled up to the 50 kg level. The amount of turpentine collected was of the same magnitude as that released upon drying lumber. For the process to be economical, the wood must first be brought to about 95 C with steam, and then processed with RF. Attempts to remove VOCs from OSB through low-headspace bymore » placing a curtain over the wood failed because of leaks. A more rigid container will be required. RF-treatment does not alter the gas permeability of lumber.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fritz, Brad G.; Lamb, Brian K.; Westberg, Halvor

Volatile organic compounds (VOCs) are precursors to ground level ozone. Ground level ozone is the major component of photochemical smog, and has been linked to a variety of adverse health effects. These health effects include cancer, heart disease, pneumonia and death. In order to reduce ground level ozone, VOC emissions are being more stringently regulated. One VOC source that may come under regulation is lumber drying. Drying lumber is known to emit VOC into the atmosphere. This research evaluates the validity of VOC emission measurements from a small-scale kiln to approximate VOC emissions from kilns at commercial mills. We alsomore » report emission factors for three lumber species commonly harvested in the northwest United States (Douglas-fir, ponderosa pine, & grand fir). This work was done with a novel tracer ratio technique at a small laboratory kiln and a large commercial lumber drying facility. The measured emission factors were 0.51 g/kgOD for Douglas-fir, 0.7 g/kgOD for ponderosa pine, and 0.15 g/kgOD for grand fir. Aldehyde emission rates from lumber drying were also measured in some experiments. Results indicate that aldehyde emissions can constitute a significant percentage of the total VOC emissions.« less

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

20. VIEW SOUTHEAST OF UPPER LEVEL (LUMBER STORAGE) IN EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. VIEW SOUTHEAST OF UPPER LEVEL (LUMBER STORAGE) IN EAST BUILDING SHOWING BUILDING FRAMEWORK, IRON HANGING RODS, AND CEDAR PLANKS BEING SEASONED FOR BOAT CONSTRUCTION. - Lowell's Boat Shop, 459 Main Street, Amesbury, Essex County, MA

Nde of Lumber and Natural Fiber Based Products with Air Coupled Ultrasound

NASA Astrophysics Data System (ADS)

Hsu, David K.; Utrata, David; Kuo, Monlin

2010-02-01

Due to the porous nature of wood and natural fiber based products, conventional fluid or gel coupled ultrasonic inspection is unsuitable. Air-coupled ultrasonic transmission scanning, being non-contact, is ideally suited for inspecting lumber, wood and natural fiber based products. We report here several successful applications of air-coupled ultrasound for the inspection of wood. Air-coupled ultrasonic scan at 120 kHz can easily detect "sinker-stock" lumber in which bacterial damage of ray tissue cells had occurred during anaerobic pond storage. Channels in ash lumber board caused by insect bore were imaged in transmission scan. Delamination and material inhomogeneities were mapped out in manufactured wood and natural fiber products including medium density fiberboards, compression molded shredded waste wood with formaldehyde resin, and acoustic panels molded with kenaf fibers. The study has demonstrated some of the capabilities of air-coupled ultrasound in the NDE of forest products.

Field performance of timber bridges. 4, Graves Crossing stress-laminated deck bridge

Treesearch

J. P. Wacker; M. A. Ritter

The Graves Crossing bridge was constructed October 1991 in Antrim County, Michigan, as part of the demonstration timber bridge program sponsored by the USDA Forest Service. The bridge is a two-span continuous, stress-laminated deck superstructure and it is 36-ft long and 26-ft wide. The bridge is one of the first stress-laminated deck bridges to be built of sawn lumber...

1998 data bank for kiln-dried red oak lumber

Treesearch

Charles J. Gatchell; R. Edward Thomas; Elizabeth S. Walker

1998-01-01

A collection of 3,487 fully described, kiln-dried red oak boards totaling 20,021 board feet. The boards, which are straight or contain no more than ? inch of crook, are FAS, FAS ONE FACE (F1F), Selects, No. 1 Common, No. 2A Common, or No. 3A common. The boards were graded with the UGRS (Ultimate Grading and Remanufacturing System) computer program. After the grade was...

Pierce Lumber, Inc. - Clean Water Act Public Notice

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

76 FR 66756 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... received a certification of eligibility to apply for trade adjustment assistance benefits and such supply...; Coastal Lumber Company, Hacker Valley, WV: September 7, 2010 TA-W-80,422F; Coastal Lumber Company...

Trends in domestic and international markets for ash logs and lumber

Treesearch

Dan Meyer

2010-01-01

While ash is a "minor" commercial hardwood species relative to oak, poplar, and maple, it still accounts for roughly 3 percent of all hardwood lumber produced, with an estimated kiln-dried value exceeding $150 million annually.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1986.

Treesearch

Debra D. Warren

1986-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

55. VIEW OF STEAMOPERATED LOG HOIST TO PUT IN COMING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

55. VIEW OF STEAM-OPERATED LOG HOIST TO PUT IN COMING LOGS INTO RALPH HULL LUMBER CO. LOG POND. PHOTOGRAPHER: UNKNOWN. DATE: 1942. COURTESY OF RALPH HULL. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

Production, prices, employment, and trade in Northwest forest industries, all quarters 2011

Treesearch

Xiaoping Zhou; Debra D Warren

2012-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1987.

Treesearch

Debra D. Warren

1987-01-01

Provides current information on lumber and plywood production and prices; employment In the forest Industries; International trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 1999.

Treesearch

Debra D. Warren

2001-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1984.

Treesearch

Florence K. Ruderman

1984-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 2001.

Treesearch

Debra D. Warren

2003-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 2010

Treesearch

Debra D. Warren

2011-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1988.

Treesearch

Debra D. Warren

1988-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1990.

Treesearch

Debra D. Warren

1991-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1994.

Treesearch

Debra D. Warren

1995-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 2012

Treesearch

Xiaoping Zhou

2013-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1988.

Treesearch

Debra D. Warren

1988-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1990.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1989.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1992.

Treesearch

Debra D. Warren

1992-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1985.

Treesearch

Debra O. Warren

1985-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1995.

Treesearch

Debra D. Warren

1995-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1986.

Treesearch

Debra D. Warren

1986-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood: volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1996.

Treesearch

Debra D. Warren

1996-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1995.

Treesearch

Debra D. Warren

1996-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1994.

Treesearch

Debra D. Warren

1995-01-01

Provides current information on lumber and plywood production and pdces; employment In the forest industries; international trade In logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related Items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1984.

Treesearch

Florence K. Ruderman

1984-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1990.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 2013

Treesearch

Xiaoping Zhou

2015-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1986.

Treesearch

Debra D. Warren

1987-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1987.

Treesearch

Debra D. Warren

1987-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber. and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1991.

Treesearch

Debra D. Warren

1992-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, all quarters 2009

Treesearch

Debra D Warren

2010-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1985.

Treesearch

Florence K. Ruderman; Debra D. Warren

1985-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1983.

Treesearch

Florence K. Ruderman

1984-01-01

Provides current information on the lumber and plywood production and prices, employment in the forest industries, international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies, and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1989.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices: employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1986.

Treesearch

Debra D. Warren

1987-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1995.

Treesearch

Debra D. Warren

1996-01-01

Provides current information on lumber and plywood production and prices: employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1991.

Treesearch

Debra D. Warren

1991-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1993.

Treesearch

Debra D. Warren

1994-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1996.

Treesearch

Debra D. Warren

1996-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1995.

Treesearch

Debra D. Warren

1996-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1993.

Treesearch

Debra D. Warren

1993-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1983.

Treesearch

Florence K. Ruderman

1983-01-01

Provides current information on the lumber and plywood production and prices, employment in the forest industries, international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies, and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1989.

Treesearch

Debra D. Warren

1989-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1983.

Treesearch

Florence K. Ruderman

1984-01-01

Provides current information on the lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1989.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1991.

Treesearch

Debra D. Warren

1992-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1990.

Treesearch

Debra D. Warren

1990-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1985.

Treesearch

Debra D. Warren

1986-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries ; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1992.

Treesearch

Debra D. Warren

1992-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1983.

Treesearch

Florence K. Ruderman

1983-01-01

Provides current information on lumber and plywood production and prices, employment in the forest industries, international trade in logs, lumber, and plywood, volume and average prices of stumpage sold by public agencies, and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1993.

Treesearch

Debra D. Warren

1994-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1984.

Treesearch

Florence K. Ruderman

1985-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1994.

Treesearch

Debra D. Warren

1994-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1985.

Treesearch

Debra D. Warren

1986-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1992.

Treesearch

Debra D. Warren

1993-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1987.

Treesearch

Debra D. Warren

1988-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1992.

Treesearch

Debra D. Warren

1993-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1994.

Treesearch

Debra D. Warren

1995-01-01

Provides current Information on lumber and plywood production and prices; employment in the forest industries; international trade In logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1984.

Treesearch

Florence K. Ruderman

1985-01-01

Portland, Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1991.

Treesearch

Debra D. Warren

1991-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1993.

Treesearch

Debra D. Warren

1994-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1988.

Treesearch

Debra D. Warren

1989-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1988.

Treesearch

Debra D. Warren

1989-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood: volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1987.

Treesearch

Debra D. Warren

1988-01-01

Provides current information on lumber and plywood production and prices: employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

Production, prices, employment, and trade in Northwest forest industries, second quarter 1997.

Treesearch

Debra D. Warren

1998-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, fourth quarter 1997.

Treesearch

Debra D. Warren

1999-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, third quarter 1997.

Treesearch

Debra D. Warren

1998-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Production, prices, employment, and trade in Northwest forest industries, first quarter 1997.

Treesearch

Debra D. Warren

1997-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries: international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies: and other related items.

Forest thinnings for integrated lumber and paper production

Treesearch

J.Y. Zhu; C.T. Scott; R. Gleisner; D. Mann; D.W. Vahey; D.P. Dykstra; G.H. Quinn; L.L. Edwards

2007-01-01

Integrated lumber and paper productions using forest thinning materials from U.S. national forests can significantly reduce the cost of prescriptive thinning operations. Many of the trees removed during forest thinnings are in small-diameter classes (diameter at breast height

76 FR 66328 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... received a certification of eligibility to apply for trade adjustment assistance benefits and such supply...-80,422E; Coastal Lumber Company, Hacker Valley, WV: September 7, 2010 TA-W-80,422F; Coastal Lumber...

Production, prices, employment, and trade in Northwest forest industries, all quarters 2014

Treesearch

Xiaoping Zhou; Jean M. Daniels

2018-01-01

Provides current information on lumber and plywood production and prices; employment in the forest industries; international trade in logs, lumber, and plywood; volume and average prices of stumpage sold by public agencies; and other related items.

The Research and Development of COM-PLY Lumber

Treesearch

Robert H. McAlister

1989-01-01

Between 1974 and 1986, a Southeastern Station Research Work Unit developed standards for composite studs, joists, and truss lumber and manufactured and demonstrated the materials. Economic feasibility was considered in every stage of research. Further development is left to industry.

Economic implications of manufacturing sawed ties and timbers

Treesearch

Lawrence D. Garrett; Lawrence D. Garrett

1969-01-01

The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

Price projections for selected grades of Douglas-fir lumber.

Treesearch

Richard W. Haynes; Thomas D. Fahey; Roger D. Fight

1988-01-01

Grade-specific price projections were developed for Douglas-fir lumber produced in the Douglas-fir region. These grade-specific price projections can be used as an aid in evaluating management practices that will affect the quality of saw logs that are produced.

Kiln Size Affects Energy Required to Dry Lumber

Treesearch

Howard N. Rosen

1980-01-01

Energy requirements for lumber drying kilns can depend on kiln size and range from 18,000 Btu/lb water evaporated for a 10 board food capacity kiln to 1,600 Btu/lb water evaporated for a 100,000 board foot capacity kiln.

76 FR 22751 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... 23, 2011. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood lumber, Promotion, Reporting... Vol. 76 Friday, No. 78 April 22, 2011 Part II Department of Agriculture Agricultural Marketing...

Lumber grade-yields for factory-grade northern red oak sawlogs

Treesearch

James G. Schroeder; Leland F. Hanks

1967-01-01

A report on results of sawing 556 northern red oak sawlogs at four sawmills in West Virginia and Virginia, and the distribution of grades for the standard factory lumber produced. Tabular data on actual yield and curved grade-yield percentages.

Stress grading of recycled lumber and timber

Treesearch

Robert H. Falk; David Green

1999-01-01

This paper presents an overview of selected research at the Forest Products Laboratory (FPL) to characterize the grade distribution and engineering properties of lumber and timber recycled from deconstructed buildings on US. Army installations. The effects of splits on timber beam and column...

A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation.

PubMed

Greco, Antonio; Frigione, Mariaenrica; Maffezzoli, Alfonso; Marseglia, Alessandro; Passaro, Alessandra

2014-07-23

This work is aimed to present an innovative technology for the reinforcement of beams for urban furniture, produced by in-mold extrusion of plastics from solid urban waste. This material, which is usually referred to as "recycled plastic lumber", is characterized by very poor mechanical properties, which results in high deflections under flexural loads, particularly under creep conditions. The Prowaste project, founded by the EACI (European Agency for Competitiveness and Innovation) in the framework of the Eco-Innovation measure, was finalized to develop an innovative technology for selective reinforcement of recycled plastic lumber. Selective reinforcement was carried out by the addition of pultruded glass rods in specific positions with respect to the cross section of the beam, which allowed optimizing the reinforcing efficiency. The reinforcement of the plastic lumber beams with pultruded rods was tested at industrial scale plant, at Solteco SL (Alfaro, Spain). The beams obtained, characterized by low cost and weight, were commercialized by the Spanish company. The present paper presents the most relevant results of the Prowaste project. Initially, an evaluation of the different materials candidates for the reinforcement of recycled plastic lumber is presented. Plastic lumber beams produced in the industrial plant were characterized in terms of flexural properties. The results obtained are interpreted by means of beam theory, which allows for extrapolation of the characteristic features of beams produced by different reinforcing elements. Finally, a theoretical comparison with other approaches which can be used for the reinforcement of plastic lumber is presented, highlighting that, among others, the Prowaste concept maximizes the stiffening efficiency, allowing to significantly reduce the weight of the components.

Career Oriented Mathematics, Student's Manual. [Includes Scale; Apprenticeship: Learning to be a Cement Mason; Textiles; Being Self-Employed: Harvesting and Sale of Pulpwood; and Lumber Yard Employee.

ERIC Educational Resources Information Center

Mahaffey, Michael L.; McKillip, William D.

This volume includes student manuals for five units in the Career Oriented Mathematics Program, which was developed to improve mathematical abilities and attitudes of secondary students by presenting the material in a job-relevant context. The units are titled: (1) Scale, (2) Apprenticeship: Learning to be a Cement Mason, (3) Textiles, (4) Being…

Predictors of job tenure in a lumber-plywood mill

Treesearch

Charles H. Wolf

1973-01-01

Multiple discriminant analysis was used to identify biographic and employment history variables associated with job tenure in a lumber-plywood mill. Several variables-friends and relatives, type of housing, commuting distance, and prior work experience in the wood industry-were found to be significant.