Application of non-equilibrium plasmas in treatment of wool fibers and seeds

NASA Astrophysics Data System (ADS)

Petrović, Zoran

2003-10-01

While large effort is under way to achieve stable, large area, non-equilibrium plasma reactors operating at atmospheric pressure we should still consider application of low pressure reactors, which provide well defined, easily controlled reactive plasmas. Therefore, the application of low pressure rf plasmas for the treatment of wool and seed was investigated. The studies were aimed at establishing optimal procedure to achieve better wettability, dyeability and printability of wool. Plasma treatment led to a modification of wool fiber topography and formation of new polar functional groups inducing the increase of wool hydrophylicity. Plasma activation of fiber surface was also used to achieve better binding of biopolymer chitosan to wool in order to increase the content of favorable functional groups and thus improving sorption properties of recycled wool fibers for heavy metal ions and acid dyes. In another study, the increase of germination percentage of seeds induced by plasmas was investigated. We have selected dry (unimbibed) Empress tree seeds (Paulownia tomentosa Steud.). Empress tree seed has been studied extensively and its mechanism of germination is well documented. Germination of these seeds is triggered by light in a limited range of wavelengths. Interaction between activated plasma particles and seed, inside the plasma reactor, leads to changes in its surface topography, modifies the surface layer and increases the active surface area. Consequently, some bioactive nitrogeneous compounds could be bound to the activated surface layer causing the increment of germination percentage.

Effect of Surface Treatment on the Properties of Wool Fabric

NASA Astrophysics Data System (ADS)

Kan, C. W.; Yuen, C. W. M.; Chan, C. K.; Lau, M. P.

Wool fiber is commonly used in textile industry, however, it has some technical problems which affect the quality and performance of the finished products such as felting shrinkage, handle, lustre, pilling, and dyeability. These problems may be attributed mainly in the presence of wool scales on the fiber surface. Recently, chemical treatments such as oxidation and reduction are the commonly used descaling methods in the industry. However, as a result of the pollution caused by various chemical treatments, physical treatment such as low temperature plasma (LTP) treatment has been introduced recently because it is similarly capable of achieving a comparable descaling effect. Most of the discussions on the applications of LTP treatment on wool fiber were focused on applying this technique for improving the surface wettability and shrink resistance. Meanwhile, little discussion has been made on the mechanical properties, thermal properties, and the air permeability. In this paper, wool fabric was treated with LTP treatment with the use of a non-polymerizing gas, namely oxygen. After the LTP treatment, the fabrics low-stress mechanical properties, air permeability, and thermal properties were evaluated and discussed.

Investigations into the Anti-Felting Properties of Sputtered Wool Using Plasma Treatment

NASA Astrophysics Data System (ADS)

M. Borghei, S.; Shahidi, S.; Ghoranneviss, M.; Abdolahi, Z.

2013-01-01

In this research the effects of mordant and plasma sputtering treatments on the crystallinity and morphological properties of wool fabrics were investigated. The felting behavior of the treated samples was also studied. We used madder as a natural dye and copper sulfate as a metal mordant. We also used copper as the electrode material in a DC magnetron plasma sputtering device. The anti-felting properties of the wool samples before and after dying was studied, and it was shown that the shrink resistance and anti-felting behavior of the wool had been significantly improved by the plasma sputtering treatment. In addition, the percentage of crystallinity and the size of the crystals were investigated using an X-ray diffractometer, and a scanning electron microscope was used for morphological analysis. The amount of copper particles on the surface of the mordanted and sputtered fabrics was studied using the energy dispersive X-ray (EDX) method, and the hydrophobic properties of the samples were examined using the water drop test. The results show that with plasma sputtering treatment, the hydrophobic properties of the surface of wool become super hydrophobic.

Synthesis, structure and antimicrobial property of green composites from cellulose, wool, hair and chicken feather.

PubMed

Tran, Chieu D; Prosenc, Franja; Franko, Mladen; Benzi, Gerald

2016-10-20

Novel composites between cellulose (CEL) and keratin (KER) from three different sources (wool, hair and chicken feather) were successfully synthesized in a simple one-step process in which butylmethylimidazolium chloride (BMIm(+)Cl(-)), an ionic liquid, was used as the sole solvent. The method is green and recyclable because [BMIm(+)Cl(-)] used was recovered for reuse. Spectroscopy (FTIR, XRD) and imaging (SEM) results confirm that CEL and KER remain chemically intact and homogeneously distributed in the composites. KER retains some of its secondary structure in the composites. Interestingly, the minor differences in the structure of KER in wool, hair and feather produced pronounced differences in the conformation of their corresponding composites with wool has the highest α-helix content and feather has the lowest content. These results correlate well with mechanical and antimicrobial properties of the composites. Specifically, adding CEL into KER substantially improves mechanical strength of [CEL+KER] composites made from all three different sources, wool, hair and chicken feathers i.e., [CEL+wool], [CEL+hair] and [CEL+feather]. Since mechanical strength is due to CEL, and CEL has only random structure, [CEL+feather] has, expectedly, the strongest mechanical property because feather has the lowest content of α-helix. Conversely, [CEL+wool] composite has the weakest mechanical strength because wool has the highest α-helix content. All three composites exhibit antibacterial activity against methicillin resistant Staphylococcus aureus (MRSA). The antibacterial property is due not to CEL but to the protein and strongly depends on the type of the keratin, namely, the bactericidal effect is strongest for feather and weakest for wool. These results together with our previous finding that [CEL+KER] composites can control release of drug such as ciprofloxacin clearly indicate that these composites can potentially be used as wound dressing. Copyright © 2016 Elsevier Ltd. All rights reserved.

Isolation and Analysis of Keratins and Keratin-Associated Proteins from Hair and Wool.

PubMed

Deb-Choudhury, Santanu; Plowman, Jeffrey E; Harland, Duane P

2016-01-01

The presence of highly cross-linked protein networks in hair and wool makes them very difficult substrates for protein extraction, a prerequisite for further protein analysis and characterization. It is therefore imperative that these cross-links formed by disulfide bridges are first disrupted for the efficient extraction of proteins. Chaotropes such as urea are commonly used as efficient extractants. However, a combination of urea and thiourea not only improves recovery of proteins but also results in improved resolution of the keratins in 2DE gels. Reductants also play an important role in protein dissolution. Dithiothreitol effectively removes keratinous material from the cortex, whereas phosphines, like Tris(2-carboxyethyl)phosphine, remove material from the exocuticle. The relative extractability of the keratins and keratin-associated proteins is also dependent on the concentration of chaotropes, reductants, and pH, thus providing a means to preferentially extract these proteins. Ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIM(+)[Cl](-)) are known to solubilize wool by disrupting noncovalent interactions, specifically intermolecular hydrogen bonds. BMIM(+)[Cl](-) proved to be an effective extractant of wool proteins and complementary in nature to chaotropes such as urea and thiourea for identifying unique peptides of wool proteins using mass spectrometry (MS). Successful identification of proteins resolved by one- or two-dimensional electrophoresis and MS is highly dependent on the optimal recovery of its protease-digested peptides with an efficient removal of interfering substances. The detergent sodium deoxycholate used in conjunction with Empore™ disks improved identification of proteins by mass spectrometry leading to higher percentage sequence coverage, identification of unique peptides and higher score. Copyright © 2016 Elsevier Inc. All rights reserved.

78 FR 22369 - National Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool Fiberglass Manufacturing... Fiberglass Manufacturing (Subpart NNN) major source rules? A. Subpart DDD--Mineral Wool Production Major... Wool Production Major Source Rule B. Subpart NNN--Wool Fiberglass Manufacturing Major Source Rule VIII...

Enhanced photocatalytic activity of wool-ball-like TiO2 microspheres on carbon fabric and FTO substrates

NASA Astrophysics Data System (ADS)

Zhang, Yu; Gu, Jian; Zhang, Mengqi

2018-06-01

The wool-ball-like TiO2 microspheres on carbon fabric (TiO2-CF) and FTO substrates (TiO2-FTO) have been synthesized by a facile hydrothermal method in alkali environment, using commercial TiO2 (P25) as precursors. The XRD results indicate that the as-prepared TiO2 have good crystallinity. And the SEM images show that the wool-ball-like TiO2 microspheres with a diameter of 2-3 μm are composed of TiO2 nanowires, which have a diameter of 50 nm. The photocatalytic behavior of the wool-ball-like TiO2 microspheres, TiO2-CF and TiO2-FTO under ultraviolet light was investigated by a pseudo first-order kinetic model, using methyl orange (MO) as pollutant. The wool-ball-like TiO2 microspheres obtained a degradation rate constant (Kap) of 6.91×10-3 min-1 . The Kap values of TiO2-FTO and TiO2-CF reach 13.97×10-3 min-1 and 11.80×10-3 min-1, which are 2.0 and 1.7 times higher than that of pristine wool-ball-like TiO2 microspheres due to the "sum effect" between TiO2 and substrates. This study offers a facile hydrothermal method to prepare wool-ball-like TiO2 microspheres on CF and FTO substrates, which will improve the recyclability of phtocatalysts and can be extended to other fields.

In Situ Synthesis of Gold Nanoparticles on Wool Powder and Their Catalytic Application.

PubMed

Tang, Bin; Zhou, Xu; Zeng, Tian; Lin, Xia; Zhou, Ji; Ye, Yong; Wang, Xungai

2017-03-15

Gold nanoparticles (AuNPs) were synthesized in situ on wool powder (WP) under heating conditions. Wool powder not only reduced Au ions to AuNPs, but also provided a support for as-synthesized AuNPs. WPs were treated under different concentrations of Au ions, and corresponding optical features and morphologies of the treated WPs were investigated by UV-VIS diffuse reflectance absorption spectroscopy and scanning electron microscopy (SEM). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscope (TEM) were also employed to characterize the WP treated with AuNPs. The results demonstrate that AuNPs were produced in the presence of WP and distributed over the wool particles. The porous structure led to the synthesis of AuNPs in the internal parts of WP. Acid conditions and high temperature facilitated the synthesis of AuNPs by WP in aqueous solution. The reducibility of wool was improved after being converted to powder from fibers, due to exposure of more active groups. Moreover, the obtained AuNP-WP complexes showed significant catalytic activity to accelerate the reduction reaction of 4-nitrophenol (4-NP) by sodium borohydride (NaBH₄).

Active learning approach for detection of hard exudates, cotton wool spots, and drusen in retinal images

NASA Astrophysics Data System (ADS)

Sánchez, Clara I.; Niemeijer, Meindert; Kockelkorn, Thessa; Abràmoff, Michael D.; van Ginneken, Bram

2009-02-01

Computer-aided Diagnosis (CAD) systems for the automatic identification of abnormalities in retinal images are gaining importance in diabetic retinopathy screening programs. A huge amount of retinal images are collected during these programs and they provide a starting point for the design of machine learning algorithms. However, manual annotations of retinal images are scarce and expensive to obtain. This paper proposes a dynamic CAD system based on active learning for the automatic identification of hard exudates, cotton wool spots and drusen in retinal images. An uncertainty sampling method is applied to select samples that need to be labeled by an expert from an unlabeled set of 4000 retinal images. It reduces the number of training samples needed to obtain an optimum accuracy by dynamically selecting the most informative samples. Results show that the proposed method increases the classification accuracy compared to alternative techniques, achieving an area under the ROC curve of 0.87, 0.82 and 0.78 for the detection of hard exudates, cotton wool spots and drusen, respectively.

A comparative study of Sephadex, glass wool and Percoll separation techniques on sperm quality and IVF results for cryopreserved bovine semen.

PubMed

Lee, Hae-Lee; Kim, Sue-Hee; Ji, Dong-Beom; Kim, Yong-Jun

2009-09-01

The aim of this study was to compare the effects of spermatozoa separation techniques on sperm quality and in-vitro fertilization (IVF) results for cryopreserved bovine semen. Sephadex, glass wool and Percoll gradient separation techniques were used for sperm separation and sperm motility, morphology and membrane integrity were evaluated before and after separation. Also, cleavage and blastocyst developmental rate were investigated after IVF with sperm recovered by each separation technique. The motility of samples obtained by the three separation techniques were greater compared to the control samples (p < 0.05). The percentage of spermatozoa with intact plasma-membrane integrity, identified by 6-carboxyfluoresceindiacetate/ propidium iodide fluorescent staining and the hypo-osmotic swelling test, was highest in the glass wool filtration samples (p < 0.05). The cleavage and blastocyst rate of total oocytes produced from glass wool filtration samples were also higher than the control and Sephadex filtration samples (p < 0.05), but were not significantly different from Percoll separation samples. However, a significantly greater number of cleaved embryos produced by glass wool filtration developed to blastocyst stage than those produced by Percoll separation (p < 0.05). These results indicate that spermatozoa with good quality can be achieved by these three separation techniques and can be used for bovine IVF. In particular, it suggests that glass wool filtration would be the most effective method of the three for improving sperm quality and embryo production for cryopreserved bovine spermatozoa.

Dissolution of glass wool, rock wool and alkaline earth silicate wool: morphological and chemical changes in fibers.

PubMed

Campopiano, Antonella; Cannizzaro, Annapaola; Angelosanto, Federica; Astolfi, Maria Luisa; Ramires, Deborah; Olori, Angelo; Canepari, Silvia; Iavicoli, Sergio

2014-10-01

The behavior of alkaline earth silicate (AES) wool and of other biosoluble wools in saline solution simulating physiological fluids was compared with that of a traditional wool belonging to synthetic vitreous fibers. Morphological and size changes of fibers were studied by scanning electron microscopy (SEM). The elements extracted from fibers were analyzed by inductively coupled plasma atomic emission spectrometry. SEM analysis showed a larger reduction of length-weighted geometric mean fiber diameter at 4.5 pH than at 7.4 pH. At the 7.4 pH, AES wool showed a higher dissolution rate and a dissolution time less than a few days. Their dissolution was highly non-congruent with rapid leaching of calcium. Unlike rock wool, glass wool dissolved more rapidly at physiological pH than at acid pH. Dissolution of AES and biosoluble rock wool is accompanied by a noticeable change in morphology while by no change for glass wool. Biosoluble rock wool developed a leached surface with porous honeycomb structure. SEM analysis showed the dissolution for glass wool is mainly due to breakage transverse of fiber at pH 7.4. AES dissolution constant (Kdis) was the highest at pH 7.4, while at pH 4.5 only biosoluble rockwool 1 showed a higher Kdis. Copyright © 2014 Elsevier Inc. All rights reserved.

Wool, Jute and Flax Industry Training Board

ERIC Educational Resources Information Center

Industrial Training International, 1974

1974-01-01

Early achievement in the textile industry training program focused on operative training, followed by emphasis on management development. Recruitment efforts have been increased. As Assessment of Training scheme provides standards, assistance, and recognition for individual companies in maintaining adequate training programs. (MW)

Preparation of Cotton-Wool-Like Poly(lactic acid)-Based Composites Consisting of Core-Shell-Type Fibers

PubMed Central

Wang, Jian; Zhou, Pin; Obata, Akiko; Jones, Julian R.; Kasuga, Toshihiro

2015-01-01

In previous works, we reported the fabrication of cotton-wool-like composites consisting of siloxane-doped vaterite and poly(l-lactic acid) (SiVPCs). Various irregularly shaped bone voids can be filled with the composite, which effectively supplies calcium and silicate ions, enhancing the bone formation by stimulating the cells. The composites, however, were brittle and showed an initial burst release of ions. In the present work, to improve the mechanical flexibility and ion release, the composite fiber was coated with a soft, thin layer consisting of poly(d,l-lactic-co-glycolic acid) (PLGA). A coaxial electrospinning technique was used to prepare a cotton-wool-like material comprising “core-shell”-type fibers with a diameter of ~12 µm. The fibers, which consisted of SiVPC coated with a ~2-µm-thick PLGA layer, were mechanically flexible; even under a uniaxial compressive load of 1.5 kPa, the cotton-wool-like material did not exhibit fracture of the fibers and, after removing the load, showed a ~60% recovery. In Tris buffer solution, the initial burst release of calcium and silicate ions from the “core-shell”-type fibers was effectively controlled, and the ions were slowly released after one day. Thus, the mechanical flexibility and ion-release behavior of the composites were drastically improved by the thin PLGA coating. PMID:28793691

7 CFR 31.400 - Samples for wool and wool top grades; method of obtaining.

Code of Federal Regulations, 2010 CFR

2010-01-01

... average and standard deviation of fiber diameter of the bulk sample are within the limits corresponding to... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS PURCHASE OF WOOL AND WOOL TOP SAMPLES § 31.400 Samples for wool...

Development of Flame Resistant Combat Uniform Fabrics Made from Long Staple Wool and Aramid Blend Yarn

DTIC Science & Technology

2013-04-15

Kentwool recombed the wool top ( wool is first combed during the production of wool top); a second combing process is an optional step sometimes used in...RESISTANT COMBAT UNIFORM FABRICS MADE FROM LONG STAPLE WOOL AND ARAMID BLEND YARN by Parvez Mehta* Mitchell Driggers* and Carole...SUBTITLE DEVELOPMENT OF FLAME RESISTANT COMBAT UNIFORM FABRICS MADE FROM LONG STAPLE WOOL AND ARAMID BLEND YARN 5a. CONTRACT NUMBER W911QY-11

Carcinogenicity of the insulation wools: reassessment of the IARC evaluation.

PubMed

Brown, R C; Davis, J M; Douglas, D; Gruber, U F; Hoskins, J A; Ilgren, E B; Johnson, N F; Rossiter, C E; Wagner, J C

1991-08-01

In assessing the health evidence concerning man-made mineral fibers, the chemical composition, surface activity, durability, and size of fibers have to be taken into account. Special-purpose fine glass fibers need to be separated from the insulation wools (glass, rock, and slag wool). The epidemiological evidence is sufficient to conclude that there has been no mesothelioma risk to workers producing or using glass wool, rock wool, or slag wool. The epidemiological studies have been large and powerful, and they show no evidence of a cause-effect relationship between lung cancer and exposure to glass wool, rock wool, or slag wool fibers. There is some evidence of a small cancer hazard attached to the manufacturing process in slag wool plants 20 to 50 years ago, when asbestos was used in some products and other carcinogenic substances were present. However, this hazard is not associated with any index of exposure to slag wool itself. Animal inhalation studies of ordinary insulation wools also show that there is no evidence of hazard associated with exposure to these relatively coarse, soluble fibers. The evidence of carcinogenicity is limited to experiments with special-purpose fine durable glass fibers or experimental fibers, and only when these fibers are injected directly into the pleural or peritoneal cavity. Multiple chronic inhalation studies of these same special-purpose fine glass fibers have not produced evidence of carcinogenicity. It is suggested that the present IARC evaluation of the carcinogenic risk of insulation wools should be revised to Category 3: not classifiable as to carcinogenicity to humans.

Fibrous Glass Aerosols: A Literature Review

DTIC Science & Technology

1987-10-02

mineral wool , which was a generic term for either slag wool or rock wool. Slag wool was produced by melting and ?iberrizng molten Iron ore, and was...important aspects. In a study by bumi et al, (20), the concentration of fibers exposed to mploye•s ot 16 fibrous glass or mineral wool plits was quantified...employees of 17 glass fiber or mineral wool plants, with at least 1 year’s exposure to fibers less than 3 um in dimter, between the years 1940 and 1963. Mean

75 FR 59682 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... Service (FAS) has denied petitions (Nos. 2011023-2011027) for trade adjustment assistance for wool filed... Economist, Farm Service Agency, Agricultural Marketing Service, and FAS. After a review, the Administrator... Adjustment Assistance for Farmers Program Staff, Office of Trade Programs, FAS, USDA; or by phone at (202...

Wool-waste as organic nutrient source for container-grown plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheljazkov, Valtcho D.; Stratton, Glenn W.; Pincock, James

A container experiment was conducted to test the hypothesis that uncomposted wool wastes could be used as nutrient source and growth medium constituent for container-grown plants. The treatments were: (1) rate of wool-waste application (0 or unamended control, 20, 40, 80, and 120 g of wool per 8-in. pot), (2) growth medium constituents [(2.1) wool plus perlite, (2.2) wool plus peat, and (2.3) wool plus peat plus perlite], and (3) plant species (basil and Swiss chard). A single addition of 20, 40, 80, or 120 g of wool-waste to Swiss chard (Beta vulgaris L.) and basil (Ocimum basilicum L.) inmore » pots with growth medium provided four harvests of Swiss chard and five harvests of basil. Total basil yield from the five harvests was 1.6-5 times greater than the total yield from the unamended control, while total Swiss chard yield from the four harvests was 2-5 times greater relative to the respective unamended control. The addition of wool-waste to the growth medium increased Swiss chard and basil tissue N, and NO{sub 3}-N and NH{sub 4}-N in growth medium relative to the unamended control. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) microanalysis of wool fibers sampled at the end of the experiments indicated various levels of decomposition, with some fibers retaining their original surface structure. Furthermore, most of the wool fibers' surfaces contained significant concentrations of S and much less N, P, or K. SEM/EDX revealed that some plant roots grow directly on wool-waste fibers suggesting either (1) root directional growth towards sites with greater nutrient concentration and/or (2) a possible role for roots or root exudates in wool decomposition. Results from this study suggest that uncomposted wool wastes can be used as soil amendment, growth medium constituent, and nutrient source for container-grown plants.« less

A Study of Intumescent Reaction Mechanisms.

DTIC Science & Technology

1984-08-01

Neoprene Fibers Considered Asbestos Metal Fiber (Steel Wool) Kevlar Mica Glass Fiber Mineral Wool Graphite Refrasil -7- • . . . ’ .. I , "’ - . NADC-84 170...Kevlar o Flexible Epoxy e Metal Fiber (Steel Wool) * Mineral Wool Fillers * Borax * Sodium Metasilicate * Ammonium Phosphate o Aluminum Sulfate...reference tables in Section 2.0] . The mineral wool appears to be the least effec- tive of the five fibers. To optimize thermal performance for a set of

76 FR 78872 - National Emission Standards for Hazardous Air Pollutants for Wool Fiberglass Manufacturing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-20

...The EPA published in the Federal Register on November 25, 2011, the proposed rules, ``National Emission Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool Fiberglass Manufacturing.'' The EPA was asked to hold a public hearing only on the wool fiberglass rule. Therefore, EPA is making two announcements: first, a public hearing for the proposed Wool Fiberglass Manufacturing rule will be held on January 4, 2012 in Kansas City Kansas, and second, the comment period for the Wool Fiberglass Manufacturing proposed rules will be extended until February 3, 2012.

Plasma treatments of wool fiber surface for microfluidic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeon, So-Hyoun; Hwang, Ki-Hwan; Lee, Jin Su

Highlights: • We used atmospheric plasma for tuning the wettability of wool fibers. • The wicking rates of the wool fibers increased with increasing treatment time. • The increasing of wettability results in removement of fatty acid on the wool surface. - Abstract: Recent progress in health diagnostics has led to the development of simple and inexpensive systems. Thread-based microfluidic devices allow for portable and inexpensive field-based technologies enabling medical diagnostics, environmental monitoring, and food safety analysis. However, controlling the flow rate of wool thread, which is a very important part of thread-based microfluidic devices, is quite difficult. For thismore » reason, we focused on thread-based microfluidics in the study. We developed a method of changing the wettability of hydrophobic thread, including wool thread. Thus, using natural wool thread as a channel, we demonstrate herein that the manipulation of the liquid flow, such as micro selecting and micro mixing, can be achieved by applying plasma treatment to wool thread. In addition to enabling the flow control of the treated wool channels consisting of all natural substances, this procedure will also be beneficial for biological sensing devices. We found that wools treated with various gases have different flow rates. We used an atmospheric plasma with O{sub 2}, N{sub 2} and Ar gases.« less

A deterministic computer simulation model of life-cycle lamb and wool production.

PubMed

Wang, C T; Dickerson, G E

1991-11-01

A deterministic mathematical computer model was developed to simulate effects on life-cycle efficiency of lamb and wool production from genetic improvement of performance traits under alternative management systems. Genetic input parameters can be varied for age at puberty, length of anestrus, fertility, precocity of fertility, number born, milk yield, mortality, growth rate, body fat, and wool growth. Management options include mating systems, lambing intervals, feeding levels, creep feeding, weaning age, marketing age or weight, and culling policy. Simulated growth of animals is linear from birth to inflection point, then slows asymptotically to specified mature empty BW and fat content when nutrition is not limiting. The ME intake requirement to maintain normal condition is calculated daily or weekly for maintenance, protein and fat deposition, wool growth, gestation, and lactation. Simulated feed intake is the minimum of availability, DM physical limit, or ME physiological limit. Tissue catabolism occurs when intake is below the requirement for essential functions. Mortality increases when BW is depressed. Equations developed for calculations of biological functions were validated with published and unpublished experimental data. Lifetime totals are accumulated for TDN, DM, and protein intake and for market lamb equivalent output values of empty body or carcass lean and wool from both lambs and ewes. These measures of efficiency for combinations of genetic, management, and marketing variables can provide the relative economic weighting of traits needed to derive optimal criteria for genetic selection among and within breeds under defined industry production systems.

Building Insulation Materials Compilation.

DTIC Science & Technology

1979-09-01

Fiber Rock or slag wool mineral fiber or mineral wool insulation is produced in a manner similar to that of fiberglass. In the U.S.A. the material most...commonly used to manufacture mineral wool is slag - from the production of steel, copper or lead. Rock wool and fiberglass are similar forms of...Insulation, Inc. Edina, Minnesota 55435 P.O. Box 188 (612) 835-3717 2705 West Highway 55 Hamel, Minnesota 55340 Casco Mineral Wool Division (612) 478-6614

Toxic Effects of Man-Made Mineral Fibers with Particular Reference to Ceramic Fibers

DTIC Science & Technology

1987-09-01

Mineral Wool , Rock Wool, Sarcoma, Slag Wool. BEST AVAILABLE COPY PREFACE This document presents information on the toxic effects of man-made mineral fibers...Naturally Synthetic Occurring Asbestos Others Man-Made OthersMineral Fibers Chrysotile Others Fibrous Ceramic Glass Crocidolite Mineral Wool Rock Slag...In recent years both ceramic fiber and mineral wool have been used to replace asbestos on board many U.S. Navy ships. In particular, material

Effect of liquid nitrogen pre-treatment on various types of wool waste fibres for biogas production.

PubMed

Kuzmanova, Elena; Zhelev, Nikolai; Akunna, Joseph C

2018-05-01

This study investigated the role of liquid nitrogen (LN 2 ) in increasing microbial accessibility of wool proteins for biogas production. It involves a mechanical size reduction of four different types of raw wool fibres, namely, Blackface, Bluefaced Leicester, Texel and Scotch Mule, in presence of liquid nitrogen, followed by the determination of the methane production potential of the pre-treated wool fibres. The highest methane yield, 157.3 cm 3 g -1 VS, was obtained from pre-treated Scotch mule wool fibre culture, and represented more than 80% increase when compared to the yield obtained from its raw equivalent culture. The increase in biogas yield was attributed to the effectiveness of LN 2 in enhancing particle size reduction and the consequent increase in wool solubility and bioavailability. Results also showed that LN 2 pre-treatment can enhance size reduction but has limited effect on the molecular structure. The study also showed that the biogas potential of waste wool fibres varies with the type and source of wool.

Characterization of Sheep Wool as a Sustainable Material for Acoustic Applications

PubMed Central

Uris, Antonio; Candelas, Pilar

2017-01-01

In recent years, natural materials are becoming a valid alternative to traditional sound absorbers due to reduced production costs and environmental protection. This paper reports the acoustical characterization of sheep wool. Measurements on normal incidence and diffuse-incidence sound absorption coefficients of different samples are reported. The airflow resistance has also been measured. The results prove that sheep wool has a comparable sound absorption performance to that of mineral wool or recycled polyurethane foam. An empirical model is used to calculate the sound absorption of sheep wool samples. A reasonable agreement on the acoustic absorption of all sheep wool samples is obtained. PMID:29112133

Characterization of Sheep Wool as a Sustainable Material for Acoustic Applications.

PubMed

Del Rey, Romina; Uris, Antonio; Alba, Jesús; Candelas, Pilar

2017-11-07

In recent years, natural materials are becoming a valid alternative to traditional sound absorbers due to reduced production costs and environmental protection. This paper reports the acoustical characterization of sheep wool. Measurements on normal incidence and diffuse-incidence sound absorption coefficients of different samples are reported. The airflow resistance has also been measured. The results prove that sheep wool has a comparable sound absorption performance to that of mineral wool or recycled polyurethane foam. An empirical model is used to calculate the sound absorption of sheep wool samples. A reasonable agreement on the acoustic absorption of all sheep wool samples is obtained.

19 CFR 151.65 - Duties.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.65 Duties. Duties on wool or hair... determination of clean yield. Estimated and liquidated duties on wool or hair tested for clean yield pursuant to... appropriate adjustment of the estimated percentage clean yield shown on the entry summary for the wool or hair...

19 CFR 151.76 - Grading of wool.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Grading of wool. 151.76 Section 151.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.76 Grading of wool. (a...

19 CFR 151.76 - Grading of wool.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Grading of wool. 151.76 Section 151.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.76 Grading of wool. (a...

19 CFR 151.76 - Grading of wool.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Grading of wool. 151.76 Section 151.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.76 Grading of wool. (a...

19 CFR 151.65 - Duties.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.65 Duties. Duties on wool or hair... determination of clean yield. Estimated and liquidated duties on wool or hair tested for clean yield pursuant to... appropriate adjustment of the estimated percentage clean yield shown on the entry summary for the wool or hair...

19 CFR 151.65 - Duties.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.65 Duties. Duties on wool or hair... determination of clean yield. Estimated and liquidated duties on wool or hair tested for clean yield pursuant to... appropriate adjustment of the estimated percentage clean yield shown on the entry summary for the wool or hair...

19 CFR 151.65 - Duties.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.65 Duties. Duties on wool or hair... determination of clean yield. Estimated and liquidated duties on wool or hair tested for clean yield pursuant to... appropriate adjustment of the estimated percentage clean yield shown on the entry summary for the wool or hair...

19 CFR 151.76 - Grading of wool.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Grading of wool. 151.76 Section 151.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.76 Grading of wool. (a...

19 CFR 151.65 - Duties.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.65 Duties. Duties on wool or hair... determination of clean yield. Estimated and liquidated duties on wool or hair tested for clean yield pursuant to... appropriate adjustment of the estimated percentage clean yield shown on the entry summary for the wool or hair...

19 CFR 151.76 - Grading of wool.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Grading of wool. 151.76 Section 151.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.76 Grading of wool. (a...

Toxicity study of isolated polypeptide from wool hydrolysate.

PubMed

Li, Jiashen; Li, Yi; Zhang, Yu; Liu, Xuan; Zhao, Zheng; Zhang, Jing; Han, Yanxia; Zhou, Dangxia

2013-07-01

The cytotoxicity of wool polypeptide has been evaluated by both cell and animal models. Wool was dissolved in sodium hydroxide solution, the pH value of the solution was adjusted to 5.55 and the precipitate was harvested as wool polypeptide. The spray-dried polypeptide was collected as powders and characterized by SEM, FTIR and TG-DSC. The cell culturing results showed that wool polypeptide had no obvious negative effect on cell viability in vitro. Both acute oral toxicity and subacute 30-day oral toxicology studies showed that wool polypeptide had no influence on body weight, feed consumption, blood chemistry, and hematology at any dose levels. There were no treatment related findings on gross or detailed necroscopy, organ weights, organ/body weight ratios and histology. Our study indicated the absence of toxicity in wool polypeptide and supported its safe use as a food ingredient or drug carrier. Copyright © 2013 Elsevier Ltd. All rights reserved.

9 CFR 95.8 - Wool, hair, and bristles; importations permitted subject to restrictions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Wool, hair, and bristles; importations... ENTRY INTO THE UNITED STATES § 95.8 Wool, hair, and bristles; importations permitted subject to restrictions. Wool, hair, or bristles offered for importation which do not meet the conditions or requirements...

9 CFR 95.8 - Wool, hair, and bristles; importations permitted subject to restrictions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Wool, hair, and bristles; importations... ENTRY INTO THE UNITED STATES § 95.8 Wool, hair, and bristles; importations permitted subject to restrictions. Wool, hair, or bristles offered for importation which do not meet the conditions or requirements...

9 CFR 95.8 - Wool, hair, and bristles; importations permitted subject to restrictions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Wool, hair, and bristles; importations... ENTRY INTO THE UNITED STATES § 95.8 Wool, hair, and bristles; importations permitted subject to restrictions. Wool, hair, or bristles offered for importation which do not meet the conditions or requirements...

Low Reflection Absorbers for Electromagnetic Waves (Reflexionsarme Absorber Fuer Elektromagnetische Wellen)

DTIC Science & Technology

1960-11-01

should be briefly recalled. They consist of air sound, as a rule, of porous substances, mineral wool , glass wool, and similar substances, whose...nonreflecting room, then small particles of graphite will -17- pi m u . I be inserted into the pores of the porous glass wool or mineral wool . Such wedges

77 FR 3223 - National Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

...The EPA published in the Federal Register on November 25, 2011, the proposed rules, ``National Emission Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool Fiberglass Manufacturing.'' The EPA was asked to hold a public hearing only on the wool fiberglass manufacturing proposed rule, and on December 20, 2011, published a notice announcing the hearing and extending the comment period for only the wool fiberglass manufacturing proposed rule (76 FR 78872). The comment period for the mineral wool production proposed rule was not extended because no public hearing was requested and no requests for an extension of the comment period were received. It has come to our attention that confusion arose from the result of having two different comment periods for the two proposed rules in the same action. Therefore, the EPA is extending the public comment period for the mineral wool production proposed rule for 10 days from January 24, 2012 to February 3, 2012, so that comments on both rules in this action are due on the same date.

Usability of Particle Film Technology and Water Holding Materials to Improve Drought Tolerance in Gossypium hirsutum L. Plants

NASA Astrophysics Data System (ADS)

Roy, K.; Zwieniecki, M.

2017-12-01

Cotton (Gossypium hirsutum L.) is relatively drought resistant and thus is planted widely in many semi-arid and arid parts of the world, many of which are usually deprived of modern water management technologies. Since the productivity of cotton plants depends on water availability, we carried out the present research aiming at testing two different low cost and arid-environment friendly water efficient techniques: application of particle film technology on leaves to reduce the transpiration rate (kaolin dust), and use of organic material to improve the soil water holding capacity (cotton wool). In details, kaolin (3% and 5%; weight:volume) mixed in water was sprayed on the upper surface of the leaves of young plants, and small amounts of cotton wool (0.1%, 0.3% and 0.5%; weight:weight) were mixed into the soils. The study showed that kaolin spray was useful as a transpiration reducing agent only if plants have adequate water in the soil (well irrigated) but not under water stress conditions. In addition, mixing a small amount of cotton wool into the soil can significantly increase the amount of water available to the plants, and extend the benefit of kaolin application on plants.

Sonosynthesis of nano TiO2 on wool using titanium isopropoxide or butoxide in acidic media producing multifunctional fabric.

PubMed

Behzadnia, Amir; Montazer, Majid; Rashidi, Abousaeid; Rad, Mahnaz Mahmoudi

2014-09-01

This study presents a novel idea to prepare nanocrystalline structure of TiO2 under ambient pressure at 60-65 °C using in situ sonochemical synthesis by hydrolysis of either titanium isopropoxide or titanium butoxide in an acidic aqueous solution. The nano titanium dioxide coated wool fabrics possess significant antibacterial/antifungal activity and self-cleaning property by discoloring Methylene blue stain under sunlight irradiation. This process has no negative effect on cytotoxicity and tensile strength of the sonotreated fabric even reduces alkaline solubility and photoyellowing and improves hydrophilicity. More titanium isopropoxide or titanium butoxide as a precursor led to higher photocatalytic activities of the treated fabrics. Also introducing more ethanol improved the adsorption of TiO2 on the wool fabric surface leading to enhanced photocatalytic activity. EDS and XRD patterns, SEM images, X-ray mapping confirmed the presence of nano TiO2 particles on the fabric surface. The role of both solvent and precursor concentrations on the various properties of the fabric was investigated and the optimized conditions were obtained using response surface methodology. Copyright © 2014 Elsevier B.V. All rights reserved.

78 FR 57808 - Rules and Regulations Under the Wool Products Labeling Act of 1939

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-20

... decorative thread in a garment or . . . where the presence of wool is insignificant.'' \\19\\ \\17\\ AAFA (5... the manufacturing process in the foreign country and in the United States.\\56\\ \\56\\ This provision... need for declaring the wool content when we find wool in a decorative thread in a garment or similar...

9 CFR 95.7 - Wool, hair, and bristles; requirements for unrestricted entry.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Wool, hair, and bristles; requirements... ENTRY INTO THE UNITED STATES § 95.7 Wool, hair, and bristles; requirements for unrestricted entry. Wool, hair, or bristles derived from ruminants and/or swine which do not meet the conditions or requirements...

9 CFR 95.7 - Wool, hair, and bristles; requirements for unrestricted entry.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Wool, hair, and bristles; requirements... ENTRY INTO THE UNITED STATES § 95.7 Wool, hair, and bristles; requirements for unrestricted entry. Wool, hair, or bristles derived from ruminants and/or swine which do not meet the conditions or requirements...

9 CFR 95.7 - Wool, hair, and bristles; requirements for unrestricted entry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Wool, hair, and bristles; requirements... ENTRY INTO THE UNITED STATES § 95.7 Wool, hair, and bristles; requirements for unrestricted entry. Wool, hair, or bristles derived from ruminants and/or swine which do not meet the conditions or requirements...

Regenerated cellulose/wool blend enhanced biomimetic hydroxyapatite mineralization.

PubMed

Salama, Ahmed; El-Sakhawy, Mohamed

2016-11-01

The current article investigates the effect of bioactive cellulose/wool blend on calcium phosphate biomimetic mineralization. Regenerated cellulose/wool blend was prepared by dissolution-regeneration of neat cellulose and natural wool in 1-butyl-3-methyl imidazolium chloride [Bmim][Cl], as a solvent for the two polymers. Crystalline hydroxyapatite nanofibers with a uniform size, shape and dimension were formed after immersing the bioactive blend in simulated body fluid. The cytotoxicity of cellulose/wool/hydroxyapatite was studied using animal fibroblast baby hamster kidney cells (BHK-21) and the result displayed good cytocompatability. This research work presents a green processing method for the development of novel cellulose/wool/hydroxyapatite hybrid materials for tissue engineering applications. Copyright © 2016 Elsevier B.V. All rights reserved.

The Bosch Process-Performance of a Developmental Reactor and Experimental Evaluation of Alternative Catalysts

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Mansell, J. Matthew

2010-01-01

Bosch-based reactors have been in development at NASA since the 1960's. Traditional operation involves the reduction of carbon dioxide with hydrogen over a steel wool catalyst to produce water and solid carbon. While the system is capable of completely closing the loop on oxygen and hydrogen for Atmosphere Revitalization, steel wool requires a reaction temperature of 650C or higher for optimum performance. The single pass efficiency of the reaction over steel wool has been shown to be less than 10% resulting in a high recycle stream. Finally, the formation of solid carbon on steel wool ultimately fouls the catalyst necessitating catalyst resupply. These factors result in high mass, volume and power demands for a Bosch system. Interplanetary transportation and surface exploration missions of the moon, Mars, and near-earth objects will require higher levels of loop closure than current technology cannot provide. A Bosch system can provide the level of loop closure necessary for these long-term missions if mass, volume, and power can be kept low. The keys to improving the Bosch system lie in reactor and catalyst development. In 2009, the National Aeronautics and Space Administration refurbished a circa 1980's developmental Bosch reactor and built a sub-scale Bosch Catalyst Test Stand for the purpose of reactor and catalyst development. This paper describes the baseline performance of two commercially available steel wool catalysts as compared to performance reported in the 1960's and 80's. Additionally, the results of sub-scale testing of alternative Bosch catalysts, including nickel- and cobalt-based catalysts, are discussed.

Evaluation of Crossbreeding of Australian Superfine Merinos with Gansu Alpine Finewool Sheep to Improve Wool Characteristics

PubMed Central

Li, Fanwen; Niu, Chune

2016-01-01

Crossbreeding of Australian Superfine Merinos (ASMs) with Gansu Alpine Finewool (GAF) sheep and an evaluation of the potential benefits of this genetic cross has not been previously conducted. 13 ASMs were crossbred with GAF sheep over a five year period with backcrossing designed to assess heterosis. Data from 11,178 lambs sired by 189 rams were used in the study. Genotype, birth year, birth type, dam age, sex and/or management group, and record age were fitted as fixed effects and within-genotype sire fitted as a random effect. Crossbreeds of 1/2 ASM expressed the most desirable effects for improving average fiber diameter (AFD), clean fleece weight (CFW), yield, coefficient of variation of AFD (CVAFD), yearling staple length (YSL) to AFD ratio (YSL/AFD), and CFW to metabolic yearling bodyweight (YWT0.75) ratio (CFW/YWT0.75) but showed the least post-weaning average daily gain (powADG) and YWT. Genotype of backcrossing with 1/4 ASM obtained moderate improvements in AFD, CFW, CVAFD, and YSL/AFD but the highest YSL, WWT, and prwADG. Except for yield (-1.42%) and CFW/YWT0.75 (-1%), heterosis estimates were generally low and positive, and ranged from 0.1% for CVAFD to 4% for powADG, which indicates the potential to improve relevant traits through exploiting heterosis to a varying extent. The ASMs sampled in this study were found to be superior to GAFs for AFD, CFW, yield, and CVAFD by 19.82%, 11.68%, 14.47%, and 6.99%, respectively, but inferior for YSL, PowADG, and YWT by 4.36%, 50.97%, and 16.93%, respectively. ASMs also appeared to be more efficient than GAFs in clean wool production (25.34%) and staple length growth (16.17%). The results of our study strongly suggest that an infusion of ASM genes via crossbreeding is an effective and appropriate approach to improve wool microns and wool production from GAF sheep, and we make recommendations to tackle the undesirable traits of YWT and YSL from ASM introduction. PMID:27832155

Trial of human laser epilation technology for permanent wool removal in Merino sheep.

PubMed

Colditz, I G; Cox, T; Small, A H

2015-01-01

To assess whether human laser epilation technology can permanently prevent wool growth in sheep. An observational study. Two commercial human epilation lasers (Sharplan alexandrite 755 nm laser, and Lumenis LightSheer 800 nm diode laser) were tested at energies between 10 and 100 J/cm2 and pulse widths from 2 to 400 ms. Wool was clipped from flank, breech, pizzle and around the eyes of superfine Merino sheep with Oster clippers. After initial laser removal of residual wool to reveal bare skin, individual skin sites were treated with up to 15 cycles of laser irradiation. Behavioural responses during treatment, skin temperature immediately after treatment and skin and wool responses for 3 months after treatment were monitored. A clear transudate was evident on the skin surface within minutes. A dry superficial scab developed by 24 h and remained adherent for at least 6 weeks. When scabs were shed, there was evidence of scarring at sites receiving multiple treatment cycles and normal wool growth in unscarred skin. There was no evidence of laser energy level or pulse width affecting the response of skin and wool to treatment and no evidence of permanent inhibition of wool growth by laser treatment. Laser treatment was well tolerated by the sheep. Treatment of woolled skin with laser parameters that induce epilation by selective photothermolysis in humans failed to induce permanent inhibition of wool growth in sheep. Absence of melanin in wool may have contributed to the result. © 2015 Australian Veterinary Association.

Utilization of Mineral Wools as Alkali-Activated Material Precursor

PubMed Central

Yliniemi, Juho; Kinnunen, Paivo; Karinkanta, Pasi; Illikainen, Mirja

2016-01-01

Mineral wools are the most common insulation materials in buildings worldwide. However, mineral wool waste is often considered unrecyclable because of its fibrous nature and low density. In this paper, rock wool (RW) and glass wool (GW) were studied as alkali-activated material precursors without any additional co-binders. Both mineral wools were pulverized by a vibratory disc mill in order to remove the fibrous nature of the material. The pulverized mineral wools were then alkali-activated with a sodium aluminate solution. Compressive strengths of up to 30.0 MPa and 48.7 MPa were measured for RW and GW, respectively, with high flexural strengths measured for both (20.1 MPa for RW and 13.2 MPa for GW). The resulting alkali-activated matrix was a composite-type in which partly-dissolved fibers were dispersed. In addition to the amorphous material, sodium aluminate silicate hydroxide hydrate and magnesium aluminum hydroxide carbonate phases were identified in the alkali-activated RW samples. The only crystalline phase in the GW samples was sodium aluminum silicate. The results of this study show that mineral wool is a very promising raw material for alkali activation. PMID:28773435

7 CFR 1280.128 - Wool.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.128 Wool. Wool means fiber from the fleece of a lamb. ...

Guidelines for treatment of lice in sheep with long wool based on a model of the development of wool damage.

PubMed

Lucas, P G; Horton, B J

2014-01-01

This study used a model of the development of wool damage caused by lice in long wool to examine the conditions under which treatment of the sheep is advisable on an economic basis. The model uses the proportion of a flock showing visible signs of rubbing and the number of days until the next shearing to compare the cost of treatment (product plus labour) with production losses because of the reduction in wool value caused by lice. From the model output, guidelines are provided to inform producers of the most cost-effective option for lice control. Under normal conditions, if there are any signs of rubbing ≥140 days before shearing, then treatment was the best option. If signs of wool damage are not observed until there are ≤70 days before shearing, then the most cost-effective option is to not treat at all. Between these two periods, the time period in which not treating is the most cost-effective option decreases as the number of sheep visibly affected by lice increases. At higher wool values (A$70/head vs A$35), the option to treat is brought forward approximately 25 days, whereas at a low wool value (A$17.50/head) the period in which no treatment is the most cost-effective is extended by approximately 25 days. Treating only the visibly affected sheep is the best option only for a very short time for all wool values and treatment costs. The model provides guidelines for control of lice in long wool to minimise the net cost of infestation and limit unnecessary pesticide use. © 2014 Australian Veterinary Association.

Injurious effects of wool and grain dusts on alveolar epithelial cells and macrophages in vitro.

PubMed Central

Brown, D M; Donaldson, K

1991-01-01

Epidemiological studies of workers in wool textile mills have shown a direct relation between the concentration of wool dust in the air and respiratory symptoms. Injurious effects of wool dust on the bronchial epithelium could be important in causing inflammation and irritation. A pulmonary epithelial cell line in vitro was therefore used to study the toxic effects of wool dust. Cells of the A549 epithelial cell line were labelled with 51Cr and treated with whole wool dusts and extracts of wool, after which injury was assessed. Also, the effects of grain dust, which also causes a form of airway obstruction, were studied. The epithelial injury was assessed by measuring 51Cr release from cells as an indication of lysis, and by monitoring cells which had detached from the substratum. No significant injury to A549 cells was caused by culture with any of the dusts collected from the air but surface "ledge" dust caused significant lysis at some doses. Quartz, used as a toxic control dust, caused significant lysis at the highest concentration of 100 micrograms/well. To determine whether any injurious material was soluble the dusts were incubated in saline and extracts collected. No extracts caused significant injury to epithelial cells. A similar lack of toxicity was found when 51Cr labelled control alveolar macrophages were targets for injury. Significant release of radiolabel was evident when macrophages were exposed to quartz at concentrations of 10 and 20 micrograms/well, there being no significant injury with either wool or grain dusts. These data suggest that neither wool nor grain dust produce direct injury to epithelial cells, and further studies are necessary to explain inflammation leading to respiratory symptoms in wool and grain workers. PMID:2015211

Sperm preparation through Sephadex™ filtration improves in vitro fertilization rate of buffalo oocytes.

PubMed

Husna, A U; Azam, A; Qadeer, S; Awan, M A; Nasreen, S; Shahzad, Q; Fouladi-Nashta, A; Khalid, M; Akhter, S

2018-04-01

Routinely, swim-up method is used to separate high-quality sperm; however, long processing time and close cell-to-cell contact during the centrifugation step are inevitable elements of oxidative stress to sperm. The objective was to evaluate Sephadex ™ and glass wool filtration to separate motile, intact and viable sperm for in vitro fertilization in buffalo. The cumulus-oocyte complexes (COCs) were collected from ovaries of slaughtered buffaloes by aspiration and matured for 24 hr in CO 2 incubator at 38.5°C and 5% CO 2 . Matured COCs were rinsed twice in fertilization TALP and placed in the pre-warmed fertilization medium without sperm. Cryopreserved buffalo semen was thawed at 37°C for 30 s and processed through Sephadex ™ , glass wool filtration and swim-up (control). Total and motile sperm recovery rates were assessed, resuspended in fertilization TALP and incubated for 15-20 min in CO 2 incubator. Samples prepared by each method were divided into two aliquots: one aliquot was studied for sperm quality (progressive motility, membrane integrity, viability, liveability), while the other was subjected to co-incubation with sets of 10-15 in vitro matured oocytes. Data on sperm quality were analysed by ANOVA, while in vitro fertilizing rates were compared by chi-squared test using SPSS-20. Least significant difference (LSD) test was used to compare treatment means. Glass wool filtration yielded higher total and motile sperm recovery rate, while Sephadex ™ filtration improved (p < .05) sperm quality (progressive motility, membrane integrity, viability, liveability). Sperm preparation through Sephadex filtration yielded higher in vitro fertilization rate in terms of cleavage rate compared to glass wool filtration and swim-up (control). In conclusion, cryopreserved Nili-Ravi buffalo sperm selected through Sephadex filtration showed improved quality and yielded better fertilization rates (cleavage rate) of in vitro matured/fertilized oocytes. Sephadex filtration could be a promising technique for use in in vitro fertilization in buffalo. © 2017 Blackwell Verlag GmbH.

Performance of steel wool fiber reinforced geopolymer concrete

NASA Astrophysics Data System (ADS)

Faris, Meor Ahmad; Abdullah, Mohd Mustafa Al Bakri; Ismail, Khairul Nizar; Muniandy, Ratnasamy; Ariffin, Nurliayana

2017-09-01

In this paper, performance of geopolymer concrete was studied by mixing of Class F fly ash from Manjung power station, Lumut, Perak, Malaysia with alkaline activator which are combination of sodium hydroxide and sodium silicate. Steel wool fiber were added into the geopolymer concrete as reinforcement with different weight percentage vary from 0 % - 5 %. Chemical compositions of Malaysian fly ash was first analyzed by using X-ray fluorescence. All geopolymer concrete reinforced with steel wool fiber with different weight percentage were tested in terms of density, workability, and compression. Result shows Malaysian fly ash identified by using XRF was class F. Density of geopolymer concrete close to density of OPC which is approximately 2400 kg/m3 and the density was increase gradually with the additions of steel fiber. However, the inclusions of steel fibers also shows some reduction to the workability of geopolymer concrete. Besides, the compressive strength was increased with the increasing of fibers addition until maximum of 18.6 % improvement at 3 % of steel fibers.

7 CFR 1280.129 - Wool products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.129 Wool products. Wool..., excluding pelts. Lamb Promotion, Research, and Information Board ...

Perspectives on refractory ceramic fiber (RCF) carcinogenicity: comparisons with other fibers*

PubMed Central

Greim, Helmut; Utell, Mark J.; Niebo, Ron

2014-01-01

In 2011, SCOEL classified RCF as a secondary genotoxic carcinogen and supported a practical threshold. Inflammation was considered the predominant manifestation of RCF toxicity. Intrapleural and intraperitoneal implantation induced mesotheliomas and sarcomas in laboratory animals. Chronic nose-only inhalation bioassays indicated that RCF exposure in rats increased the incidence of lung cancer and similar exposures resulted in mesothelioma in hamsters, but these studies may have been compromised by overload. Epidemiological studies in the US and Europe showed an association between exposure and prevalence of respiratory symptoms and pleural plaques, but no interstitial fibrosis, mesotheliomas, or increased numbers of lung tumors were observed. As the latency of asbestos induced mesotheliomas can be up to 50 years, the relationship between RCF exposure and respiratory malignances has not been fully determined. Nonetheless, it is possible to offer useful perspectives. RCF and rock wool have similar airborne fiber dimensions and biopersistence. Therefore, it is likely that these fibers have similar toxicology. Traditional rock wool has been the subject of numerous cohort and case control studies. For rock wool, IARC (2002) concluded that the epidemiological studies did not provide evidence of carcinogenicity. Based on analogies with rock wool (read across), it is reasonable to believe that increases in lung cancer or any mesotheliomas are unlikely to be found in the RCF-exposed cohort. RCF producers have developed a product stewardship program to measure and control fiber concentrations and to further understand the health status of their workers. PMID:25264933

Analysis of structural transformation in wool fiber resulting from oxygen plasma treatment using vibrational spectroscopy

NASA Astrophysics Data System (ADS)

Barani, Hossein; Haji, Aminoddin

2015-01-01

The aim of this study was to investigate the influence of oxygen plasma procedure at different time treatments on wool fiber using the micro-Raman spectroscopy as a non-destructive vibrational spectroscopic technique and Fourier transform infrared spectroscopy. The amide I and III regions, Csbnd C skeletal vibration region, and Ssbnd S and Csbnd S bonds vibration regions were analyzed with the Raman microscope. The Fourier transform infrared spectroscope analysis was employed to find out the effect of oxygen plasma treatment on the cysteic acid residues content of the wool fiber sample. The results indicated that the α-helix structure was the highest component content of wool fiber. Moreover, the protein secondary structure of wool fibers was transformed from α-helical arrangement to the β-pleated sheet configuration during the oxygen plasma treatment. Also, the disulphide bonds content in the treated wool fiber reduced because they were fractured and oxidized during oxygen plasma treatment. The oxygen plasma treated samples presented higher cysteic acid compared to the untreated wool samples due to produce more cleavage of disulfide linkages.

Genetic correlations among and between wool, growth and reproduction traits in Merino sheep.

PubMed

Safari, E; Fogarty, N M; Gilmour, A R; Atkins, K D; Mortimer, S I; Swan, A A; Brien, F D; Greeff, J C; van der Werf, J H J

2007-04-01

Data from seven research resource flocks across Australia were combined to provide accurate estimates of genetic correlations among production traits in Merino sheep. The flocks represented contemporary Australian Merino fine, medium and broad wool strains over the past 30 years. Over 110,000 records were available for analysis for each of the major wool traits, and 50,000 records for reproduction and growth traits with over 2700 sires and 25,000 dams. Individual models developed from the single trait analyses were extended to the various combinations of two-trait models to obtain genetic correlations among six wool traits [clean fleece weight (CFW), greasy fleece weight, fibre diameter (FD), yield, coefficient of variation of fibre diameter and standard deviation of fibre diameter], four growth traits [birth weight, weaning weight, yearling weight (YWT), and hogget weight] and four reproduction traits [fertility, litter size, lambs born per ewe joined, lambs weaned per ewe joined (LW/EJ)]. This study has provided for the first time a comprehensive matrix of genetic correlations among these 14 wool, growth and reproduction traits. The large size of the data set has also provided estimates with very low standard errors. A moderate positive genetic correlation was observed between CFW and FD (0.29 +/- 0.02). YWT was positively correlated with CFW (0.23 +/- 0.04), FD (0.17 +/- 0.04) and LWEJ (0.58 +/- 0.06), while LW/EJ was negatively correlated with CFW (-0.26 +/- 0.05) and positively correlated with FD (0.06 +/- 0.04) and LS (0.68 +/- 0.04). These genetic correlations, together with the estimates of heritability and other parameters provide the basis for more accurate prediction of outcomes in complex sheep-breeding programmes designed to improve several traits.

Effects of various dietary lipid additives on lamb performance, carcass characteristics, adipose tissue fatty acid composition, and wool characteristics.

PubMed

Meale, S J; Chaves, A V; He, M L; Guan, L L; McAllister, T A

2015-06-01

Tasco (Ascophyllum nodosum; TA) was compared to canola (CO), flax (FO), and safflower oils (SO) for effects on performance, carcass characteristics, and fatty acid profiles of adipose tissue in skirt muscle (SM), subcutaneous and perirenal adipose tissues, and wool production and quality characteristics of Canadian Arcott lambs. Fifty-six lambs were randomly assigned to dietary treatments (n = 14 per treatment). Diets consisted of a pelleted, barley-based finishing diet containing either TA, CO, FO, or SO (2% of dietary DM). Feed deliveries and orts were recorded daily. Lambs were weighed weekly and slaughtered once they reached ≥ 45 kg BW. Carcass characteristics, rumen pH, and liver weights were determined at slaughter. Wool yield was determined on mid-side patches of 100 cm2 shorn at d 0 and on the day before slaughter (d 105 or 140). Dye-bands were used to determine wool growth, micrometer and staple length. Adipose tissues and SM samples were taken at slaughter and analyzed for FA profiles. No effects were observed on intake, growth, or carcass characteristics. A greater (P = 0.02) staple strength of lambs fed CO was the only effect observed in wool. Flax oil increased total n-3 and decreased the n-6/n-3 ratio in tissue FA profiles (P < 0.001) in comparison to other diets. Tasco increased (P ≤ 0.001) SFA/PUFA in all tissues, whereas concentrations of CLA c-9, t-11 were greatest with SO in all tissues (P ≤ 0.02), compared to other diets. These results suggest Tasco supplementation did not improve the n-3/n-6 or SFA/PUFA ratios of lamb adipose tissues compared to other dietary lipid additives.

Fire Safety Aspects of Polymeric Materials. Volume 9. Ships

DTIC Science & Technology

1980-01-01

insulation. Structural Insulation - Varying thickness of non-combustible mineral wool . Decks - 1%- to ’A-inch stiffened steel, covered with magnesite deck...valve requited in cer- Gypsum board faced with steel ra i onfigutron Mineral wool . reinforced with steel Mi:neral wool, tenforved with .laed Plaat.o...Aluminumi faced mineral wool .C-Class 46 CE-K 164.009--Noncombsible All nonoecmbusribln, metals. com- Pout’es of alumnum and fiber- glass "A-Class

Proteolytic enzyme engineering: a tool for wool.

PubMed

Araújo, Rita; Silva, Carla; Machado, Raul; Casal, Margarida; Cunha, António M; Rodriguez-Cabello, José Carlos; Cavaco-Paulo, Artur

2009-06-08

One of the goals of protein engineering is to tailor the structure of enzymes to optimize industrial bioprocesses. In the present work, we present the construction of a novel high molecular weight subtilisin, based on the fusion of the DNA sequences coding for Bacillus subtilis prosubtilisin E and for an elastin-like polymer (ELP). The resulting fusion protein was biologically produced in Escherichia coli , purified and used for wool finishing assays. When compared to the commercial protease Esperase, the recombinant subtilisinE-VPAVG(220) activity was restricted to the cuticle of wool, allowing a significant reduction of pilling, weight loss and tensile strength loss of wool fibers. Here we report, for the first time, the microbial production of a functionalized high molecular weight protease for controlled enzymatic hydrolysis of wool surface. This original process overcomes the unrestrained diffusion and extended fiber damage which are the major obstacles for the use of proteases for wool finishing applications.

40 CFR 63.1178 - For cupolas, what standards must I meet?

Code of Federal Regulations, 2012 CFR

2012-07-01

... meet? 63.1178 Section 63.1178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Standards...

40 CFR 63.1178 - For cupolas, what standards must I meet?

Code of Federal Regulations, 2014 CFR

2014-07-01

... meet? 63.1178 Section 63.1178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Standards...

40 CFR 63.1178 - For cupolas, what standards must I meet?

Code of Federal Regulations, 2011 CFR

2011-07-01

... meet? 63.1178 Section 63.1178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Standards...

40 CFR 63.1178 - For cupolas, what standards must I meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

... meet? 63.1178 Section 63.1178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Standards...

Standard Practice for the Selection and Application of Marine Deck Coverings

DTIC Science & Technology

1992-07-01

floors to reduce the transmission of noise and vibrations. These typically consist of layers of mineral wool or mineral wool panel sections with a...crew efficiency. Floating deck systems are generally composed of an insulating material such as mineral wool that are laid loose on the structural...Chapter II-2, Part A, Regulation 3(c). Sound Reduction Index - 44 dB Sound Insulation Index (Ia) - 47 dB Density of Mineral Wool - 10 pounds per

Utility Distribution Systems in Sweden, Finland, Norway and England

DTIC Science & Technology

1976-11-01

the duct adds to the water protection and sumps, with access for pumping, are provided -at low points. Glass wool or mineral wool insulation is placed...mm thick, is glass, mineral wool or polyurethane foam. The outer pipe is steel, polyurethane or asbestos cement coupled with O-ring seals. Asbestos...decided that asbestos cement should be replaced by less dangerous materials. Some use is made of steel, plastic or copper tubes with mineral wool or

Assessment of rock wool as support material for on-site sanitation: hydrodynamic and mechanical characterization.

PubMed

Wanko, Adrien; Laurent, Julien; Bois, Paul; Mosé, Robert; Wagner-Kocher, Christiane; Bahlouli, Nadia; Tiffay, Serge; Braun, Bouke; Provo kluit, Pieter-Willem

2016-01-01

This study proposes mechanical and hydrodynamic characterization of rock wool used as support material in compact filter. A double-pronged approach, based on experimental simulation of various physical states of this material was done. First of all a scanning electron microscopy observation allows to highlight the fibrous network structure, the fibres sizing distribution and the atomic absorption spectrum. The material was essentially lacunar with 97 ± 2% of void space. Static compression tests on variably saturated rock wool samples provide the fact that the strain/stress behaviours depend on both the sample conditioning and the saturation level. Results showed that water exerts plastifying effect on mechanical behaviour of rock wool. The load-displacement curves and drainage evolution under different water saturation levels allowed exhibiting hydraulic retention capacities under stress. Finally, several tracer experiments on rock wool column considering continuous and batch feeding flow regime allowed: (i) to determine the flow model for each test case and the implications for water dynamic in rock wool medium, (ii) to assess the rock wool double porosity and discuss its advantages for wastewater treatment, (iii) to analyse the benefits effect for water treatment when the high level of rock wool hydric retention was associated with the plug-flow effect, and (iv) to discuss the practical contributions for compact filter conception and management.

Maternal nutrition during pregnancy influences offspring wool production and wool follicle development.

PubMed

Magolski, J D; Luther, J S; Neville, T L; Redmer, D A; Reynolds, L P; Caton, J S; Vonnahme, K A

2011-11-01

The effects of maternal nutrition on offspring wool production (quality and quantity) were evaluated. Primiparous Rambouillet ewes (n = 84) were randomly allocated to 1 of 6 treatments in a 2 × 3 factorial design. Selenium treatment [adequate Se (ASe, 9.5 μg/kg of BW) vs. high Se (HSe, 81.8 μg/kg of BW)] was initiated at breeding, and maternal nutritional intake [control (CON, 100% of requirements) vs. restricted (60% of CON) vs. overfed (140% of CON)] was initiated at d 50 of gestation. Lamb birth weight was recorded at delivery, and all lambs were placed on the same diet immediately after birth to determine the effects of prenatal nutrition on postnatal wool production and follicle development. At 180 ± 2.2 d of age, lambs were necropsied and pelt weights were recorded. Wool samples were collected from the side and britch areas, whereas skin samples were collected from the side of each lamb only. Although Se status did not influence side staple length in males, female lambs born from ewes on the ASe treatment had a shorter staple length (P < 0.05) when compared with females from ewes on the HSe treatment. Maternal nutritional intake and Se status did not influence (P ≥ 0.23) wool characteristics on the britch. However, at the britch, wool from female lambs had a reduced comfort factor (P = 0.01) and a greater (P = 0.02) fiber diameter compared with wool from male lambs. Maternal Se supplementation, maternal nutritional plane, sex of the offspring, or their interactions had no effect (P > 0.13) on primary (29.10 ± 1.40/100 µm(2)) and secondary (529.84 ± 21.57/100 µm(2)) wool follicle numbers. Lambs from ASe ewes had a greater (P = 0.03) secondary:primary wool follicle ratio compared with lambs from HSe ewes (20.93 vs. 18.01 ± 1.00). Despite similar postnatal diets, wool quality was affected by maternal Se status and the maternal nutritional plane.

Identification of microRNAs in Wool Follicles during Anagen, Catagen, and Telogen Phases in Tibetan Sheep

PubMed Central

Liu, Guangbin; Liu, Ruize; Li, Qinqun; Tang, Xiaohui; Yu, Mei; Li, Xinyun; Cao, Jianhua; Zhao, Shuhong

2013-01-01

Background Wool quality is one of the most important economic traits in sheep. The wool fiber is derived from specialized skin cells that are referred to as wool follicles. To understand the roles of microRNAs (miRNAs) in wool fiber growth, we detected the expression patterns of miRNAs in wool follicles at the anagen, catagen, and telogen stages from Tibetan sheep through Solexa sequencing. Results A total of 244 mature miRNAs were identified. Of these, only five miRNAs are listed in the database of sheep miRNAs (miRBase Database V19), and the other 239 miRNAs have not been previously described in this species. Further analyses indicated that 204 miRNAs are evolutionarily conserved among mammal species, whereas 35 of the identified miRNAs were first found specifically in sheep. The expression pattern analyses showed that the expression levels of 39, 34, and 20 of the miRNAs significantly change between anagen and catagen, between anagen and telogen, and between catagen and telogen, respectively. The results of the bioinformatics analysis show that these differentially expressed miRNAs might regulate wool follicle development by targeting genes in many different pathways, such as the MAPK and Wnt pathways, as well as the pathways that regulate the actin cytoskeleton, focal adhesion, and tight junctions. Furthermore, we identified six differentially expressed miRNAs (oar-miR-103-3P, oar-miR-148b-3P, oar-miR-320-3P, oar-miR-31-5P, oar-novel-1-5P, and oar-novel-2-3P) that might target the key genes of the Wnt pathway. It has been reported that the Wnt pathway is critical for wool follicle development. Therefore, these miRNAs may regulate wool development through the Wnt pathway. Conclusions Our results provide new information on the identification and expression pattern of miRNAs in wool follicles. Our data might therefore aid in the understanding of the mechanisms of wool follicle development in sheep. PMID:24204975

EVALUATION OF EFFECTIVENESS AND COST-BENEFITS OF WOOLEN ROADSIDE RECLAMATION PRODUCTS

DOT National Transportation Integrated Search

2017-12-01

This research project developed three types of products for study: woolen erosion control blankets (ECBs), wool incorporated into wood fiber compost at a 40:1 ratio (compost to wool, by weight), and wool incorporated into silt fence. The project, sup...

Thermography Control of Heat Insulation and Tightness of Buildings,

DTIC Science & Technology

1980-11-01

drawing, top to bottom: 100 + 50 mm mineral wool panels, bulk density 50 kg/m3 Vapor barrier of plastic foil 3/4" tongue and groove 13 mm gypsum panel...Horizontal steel bolts Horisontella Air leakage, in A Ireqlar Corrugated sheet metal 90 mm mineral wool (with sheathing paper) Ko"mir) emd 30 mm mineral ...bolt; Outward leakage of warm air from the room; Steel siding; 90 mm mineral wool (with wind protection); 30 mm mineral wool (with vapor barrier

Wool and grain dusts stimulate TNF secretion by alveolar macrophages in vitro.

PubMed Central

Brown, D M; Donaldson, K

1996-01-01

OBJECTIVE: The aim of the study was to investigate the ability of two organic dusts, wool and grain, and their soluble leachates to stimulate secretion of tumour necrosis factor (TNF) by rat alveolar macrophages with special reference to the role of lipopolysaccharide (LPS). METHODS: Rat alveolar macrophages were isolated by bronchoalveolar lavage (BAL) and treated in vitro with whole dust, dust leachates, and a standard LPS preparation. TNF production was measured in supernatants with the L929 cell line bioassay. RESULTS: Both wool and grain dust samples were capable of stimulating TNF release from rat alveolar macrophages in a dose-dependent manner. The standard LPS preparation caused a dose-dependent secretion of TNF. Leachates prepared from the dusts contained LPS and also caused TNF release but leachable LPS could not account for the TNF release and it was clear that non-LPS leachable activity was present in the grain dust and that wool dust particles themselves were capable of causing release of TNF. The role of LPS in wool dust leachates was further investigated by treating peritoneal macrophages from two strains of mice, LPS responders (C3H) and LPS non-responders (C3H/HEJ), with LPS. The non-responder mouse macrophages produced very low concentrations of TNF in response to the wool dust leachates compared with the responders. CONCLUSIONS: LPS and other unidentified leachable substances present on the surface of grain dust, and to a lesser extent on wool dust, are a trigger for TNF release by lung macrophages. Wool dust particles themselves stimulate TNF. TNF release from macrophages could contribute to enhancement of inflammatory responses and symptoms of bronchitis and breathlessness in workers exposed to organic dusts such as wool and grain. PMID:8758033

Wool and grain dusts stimulate TNF secretion by alveolar macrophages in vitro.

PubMed

Brown, D M; Donaldson, K

1996-06-01

The aim of the study was to investigate the ability of two organic dusts, wool and grain, and their soluble leachates to stimulate secretion of tumour necrosis factor (TNF) by rat alveolar macrophages with special reference to the role of lipopolysaccharide (LPS). Rat alveolar macrophages were isolated by bronchoalveolar lavage (BAL) and treated in vitro with whole dust, dust leachates, and a standard LPS preparation. TNF production was measured in supernatants with the L929 cell line bioassay. Both wool and grain dust samples were capable of stimulating TNF release from rat alveolar macrophages in a dose-dependent manner. The standard LPS preparation caused a dose-dependent secretion of TNF. Leachates prepared from the dusts contained LPS and also caused TNF release but leachable LPS could not account for the TNF release and it was clear that non-LPS leachable activity was present in the grain dust and that wool dust particles themselves were capable of causing release of TNF. The role of LPS in wool dust leachates was further investigated by treating peritoneal macrophages from two strains of mice, LPS responders (C3H) and LPS non-responders (C3H/HEJ), with LPS. The non-responder mouse macrophages produced very low concentrations of TNF in response to the wool dust leachates compared with the responders. LPS and other unidentified leachable substances present on the surface of grain dust, and to a lesser extent on wool dust, are a trigger for TNF release by lung macrophages. Wool dust particles themselves stimulate TNF. TNF release from macrophages could contribute to enhancement of inflammatory responses and symptoms of bronchitis and breathlessness in workers exposed to organic dusts such as wool and grain.

Provenancing Archaeological Wool Textiles from Medieval Northern Europe by Light Stable Isotope Analysis (δ13C, δ15N, δ2H)

PubMed Central

von Holstein, Isabella C. C.; Walton Rogers, Penelope; Craig, Oliver E.; Penkman, Kirsty E. H.; Newton, Jason; Collins, Matthew J.

2016-01-01

We investigate the origin of archaeological wool textiles preserved by anoxic waterlogging from seven medieval archaeological deposits in north-western Europe (c. 700–1600 AD), using geospatial patterning in carbon (δ13C), nitrogen (δ15N) and non-exchangeable hydrogen (δ2H) composition of modern and ancient sheep proteins. δ13C, δ15N and δ2H values from archaeological wool keratin (n = 83) and bone collagen (n = 59) from four sites were interpreted with reference to the composition of modern sheep wool from the same regions. The isotopic composition of wool and bone collagen samples clustered strongly by settlement; inter-regional relationships were largely parallel in modern and ancient samples, though landscape change was also significant. Degradation in archaeological wool samples, examined by elemental and amino acid composition, was greater in samples from Iceland (Reykholt) than in samples from north-east England (York, Newcastle) or northern Germany (Hessens). A nominal assignment approach was used to classify textiles into local/non-local at each site, based on maximal estimates of isotopic variability in modern sheep wool. Light element stable isotope analysis provided new insights into the origins of wool textiles, and demonstrates that isotopic provenancing of keratin preserved in anoxic waterlogged contexts is feasible. We also demonstrate the utility of δ2H analysis to understand the location of origin of archaeological protein samples. PMID:27764106

Glass wool filters for concentrating waterborne viruses and agricultural zoonotic pathogens

USDA-ARS?s Scientific Manuscript database

The key first step in evaluating pathogen levels in suspected contaminated water is concentration. Concentration methods tend to be specific for a particular pathogen group or genus, for example viruses or Cryptosporidium, requiring multiple methods if the sampling program is targeting more than on...

Identification of the full anisotropic flow resistivity tensor for multiple glass wool and melamine foam samples.

PubMed

Van der Kelen, Christophe; Göransson, Peter

2013-12-01

The flow resistivity tensor, which is the inverse of the viscous permeability tensor, is one of the most important material properties for the acoustic performance of porous materials used in acoustic treatments. Due to the manufacturing processes involved, these porous materials are most often geometrically anisotropic on a microscopic scale, and for demanding applications, there is a need for improved characterization methods. This paper discusses recent refinements of a method for the identification of the anisotropic flow resistivity tensor. The inverse estimation is verified for three fictitious materials with different degrees of anisotropy. Measurements are performed on nine glass wool samples and seven melamine foam samples, and the anisotropic flow resistivity tensors obtained are validated by comparison to measurements performed on uni-directional cylindrical samples, extracted from the same, previously measured cubic samples. The variability of flow resistivity in the batch of material from which the glass wool is extracted is discussed. The results for the melamine foam suggest that there is a relation between the direction of highest flow resistivity, and the rise direction of the material.

Genetic relationship between wool shedding in ewe-lambs and ewes

USDA-ARS?s Scientific Manuscript database

Interest in reducing labor costs related to shearing has led to the development of breeds that naturally shed their wool annually. This goal has been achieved by introducing hair-sheep genetics. These developments are relatively recent and thus the genetic underpinnings of wool shedding (WS) are not...

Estimating heritability of wool shedding in a cross-bred ewe population

USDA-ARS?s Scientific Manuscript database

Low wool prices and high production costs in sheep systems have resulted in the introduction of hair sheep genetics into flocks to reduce shearing costs. Wool shedding occurs naturally in a few breeds, and can be incorporated by crossbreeding. The opportunity to enhance shedding through selection de...

19 CFR 151.63 - Information on entry summary.

Code of Federal Regulations, 2014 CFR

2014-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.63 Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean... to each lot of wool or hair covered thereby, in addition to other information required, the total...

19 CFR 151.63 - Information on entry summary.

Code of Federal Regulations, 2013 CFR

2013-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.63 Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean... to each lot of wool or hair covered thereby, in addition to other information required, the total...

19 CFR 151.63 - Information on entry summary.

Code of Federal Regulations, 2010 CFR

2010-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.63 Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean... to each lot of wool or hair covered thereby, in addition to other information required, the total...

19 CFR 151.63 - Information on entry summary.

Code of Federal Regulations, 2011 CFR

2011-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.63 Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean... to each lot of wool or hair covered thereby, in addition to other information required, the total...

19 CFR 151.63 - Information on entry summary.

Code of Federal Regulations, 2012 CFR

2012-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.63 Information on entry summary. Each entry summary covering wool or hair subject to duty at a rate per clean... to each lot of wool or hair covered thereby, in addition to other information required, the total...

Selecting the Best Thermal Building Insulation Using a Multi-Attribute Decision Model

DTIC Science & Technology

2008-03-01

materials which come in various forms. Rock wool, also called mineral wool , is made from natural minerals and was developed in the mid-1800s (NAIMA...2008). Fiberglass is a form of mineral wool and accounts for approximately 85% of the market for residential insulation. Synthetic insulating

Navy Occupational Health Information Management System (NOHIMS). Implementation and Training Plan

DTIC Science & Technology

1988-01-01

this substance (Whole Nubers) (hole Nuabers) (KWF-) Fiberglass/ Mineral Wool ......... E ............. E ......... 1 ....... [ 3 (KHA-) Asbestos...K)F-) Fibrglass/ Mineral Wool ......... I ............. I I ......... I ....... I I (KHA-) Asbestos ........................... I ......... E I...directly with Years Months this substance (Whole Numbers) (Whole Koaberst (KIF-) Fiberglass/ Mineral Wool ............ [ ] ............. ......... I

16 CFR 300.27 - Wool products containing superimposed or added fibers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Wool products containing superimposed or added fibers. 300.27 Section 300.27 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300...

Standard wool fabric as a reference material. [for fire toxicity tests

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.

1977-01-01

Standard wool fabric is investigated as a potential reference material. A screening test method for relative toxicity exposes four albino male rats enclosed in a 4.2 liter hemispherical chamber to pyrolysis effluents produced by pyrolyzing a 1.00 g sample under a variety of test conditions (200-800 C with a 40 C/min heating rate). It is found that for fabrics containing 86-100% wool, animal response remains virtually unchanged, although a 100% wool fabric is preferred as it eliminates local composition differences as a source of variation.

Field-emission scanning electron microscopy and energy-dispersive x-ray analysis to understand the role of tannin-based dyes in the degradation of historical wool textiles.

PubMed

Restivo, Annalaura; Degano, Ilaria; Ribechini, Erika; Pérez-Arantegui, Josefina; Colombini, Maria Perla

2014-10-01

An innovative approach, combining field-emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy (EDX) analysis, is presented to investigate the degradation mechanisms affecting tannin-dyed wool. In fact, tannin-dyed textiles are more sensitive to degradation then those dyed with other dyestuffs, even in the same conservation conditions. FESEM-EDX was first used to study a set of 48 wool specimens (artificially aged) dyed with several raw materials and mordants, and prepared according to historical dyeing recipes. EDX analysis was performed on the surface of wool threads and on their cross-sections. In addition, in order to validate the model formulated by the analysis of reference materials, several samples collected from historical and archaeological textiles were subjected to FESEM-EDX analysis. FESEM-EDX investigations enabled us to reveal the correlation between elemental composition and morphological changes. In addition, aging processes were clarified by studying changes in the elemental composition of wool from the protective cuticle to the fiber core in cross-sections. Morphological and elemental analysis of wool specimens and of archaeological and historical textiles showed that the presence of tannins increases wool damage, primarily by causing a sulfur decrease and fiber oxidation.

40 CFR 63.1181 - How do I comply with the particulate matter standards for existing, new, and reconstructed cupolas?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Compliance with Standards § 63.1181 How do I comply...

40 CFR 63.1181 - How do I comply with the particulate matter standards for existing, new, and reconstructed cupolas?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Compliance with Standards § 63.1181 How do I comply...

40 CFR 63.1181 - How do I comply with the particulate matter standards for existing, new, and reconstructed cupolas?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production Compliance with Standards § 63.1181 How do I comply...

19 CFR 151.62 - Information on invoices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.62 Information on invoices. Invoices of wool or hair subject to duty at a rate per clean kilogram under Chapter 51... weight of each lot of wool or hair covered by the invoice in the condition in which it is shipped, and...

19 CFR 151.62 - Information on invoices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.62 Information on invoices. Invoices of wool or hair subject to duty at a rate per clean kilogram under Chapter 51... weight of each lot of wool or hair covered by the invoice in the condition in which it is shipped, and...

19 CFR 151.71 - Laboratory testing for clean yield.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.71... director. (b) Notification to importer. Where samples of wool or hair have been tested in a Customs... laboratory test is not feasible, the wool or hair may be retested by a commercial laboratory in accordance...

19 CFR 151.71 - Laboratory testing for clean yield.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.71... director. (b) Notification to importer. Where samples of wool or hair have been tested in a Customs... laboratory test is not feasible, the wool or hair may be retested by a commercial laboratory in accordance...

19 CFR 151.71 - Laboratory testing for clean yield.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.71... director. (b) Notification to importer. Where samples of wool or hair have been tested in a Customs... laboratory test is not feasible, the wool or hair may be retested by a commercial laboratory in accordance...

19 CFR 151.62 - Information on invoices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.62 Information on invoices. Invoices of wool or hair subject to duty at a rate per clean kilogram under Chapter 51... weight of each lot of wool or hair covered by the invoice in the condition in which it is shipped, and...

19 CFR 151.71 - Laboratory testing for clean yield.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.71... director. (b) Notification to importer. Where samples of wool or hair have been tested in a Customs... laboratory test is not feasible, the wool or hair may be retested by a commercial laboratory in accordance...

19 CFR 151.62 - Information on invoices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.62 Information on invoices. Invoices of wool or hair subject to duty at a rate per clean kilogram under Chapter 51... weight of each lot of wool or hair covered by the invoice in the condition in which it is shipped, and...

19 CFR 151.62 - Information on invoices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.62 Information on invoices. Invoices of wool or hair subject to duty at a rate per clean kilogram under Chapter 51... weight of each lot of wool or hair covered by the invoice in the condition in which it is shipped, and...

19 CFR 151.71 - Laboratory testing for clean yield.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.71... director. (b) Notification to importer. Where samples of wool or hair have been tested in a Customs... laboratory test is not feasible, the wool or hair may be retested by a commercial laboratory in accordance...

Cheyenne-Laramie County Economic Development Strategy

DTIC Science & Technology

1986-06-01

Industry SIC 2879 4. Cosmetics and Toilet Preparations Industry SIC 2844 5. Electronic Connectors Industry SIC 3678 6. Mineral Wool Industry SIC 3296...five primary target-industries selected are: Soap and Other Detergents, Toilet Preparations, Agricultural Chemicals, Mineral Wool , and Electronic...Cheyenne include: -- soap and other detergents -- toilet preparation -- agricultural chemicals -- mineral wool -- electronic connectors * downtown

16 CFR 300.15 - Labeling of containers or packaging of wool products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Labeling of containers or packaging of wool products. 300.15 Section 300.15 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300.15...

15 CFR 335.3 - Applications to receive allocation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... cut and sewed in the United States all three of the following apparel products: Worsted Wool Suits, Worsted Wool Suit-Type Jackets, and Worsted Wool Trousers. The applicant may either have cut and sewn... average fiber diameters of 18.5 microns or less, suitable for use in making suits, suit-type jackets, and...

15 CFR 335.3 - Applications to receive allocation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... cut and sewed in the United States all three of the following apparel products: Worsted Wool Suits, Worsted Wool Suit-Type Jackets, and Worsted Wool Trousers. The applicant may either have cut and sewn... average fiber diameters of 18.5 microns or less, suitable for use in making suits, suit-type jackets, and...

15 CFR 335.3 - Applications to receive allocation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... cut and sewed in the United States all three of the following apparel products: Worsted Wool Suits, Worsted Wool Suit-Type Jackets, and Worsted Wool Trousers. The applicant may either have cut and sewn... average fiber diameters of 18.5 microns or less, suitable for use in making suits, suit-type jackets, and...

15 CFR 335.3 - Applications to receive allocation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... cut and sewed in the United States all three of the following apparel products: Worsted Wool Suits, Worsted Wool Suit-Type Jackets, and Worsted Wool Trousers. The applicant may either have cut and sewn... average fiber diameters of 18.5 microns or less, suitable for use in making suits, suit-type jackets, and...

15 CFR 335.3 - Applications to receive allocation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... cut and sewed in the United States all three of the following apparel products: Worsted Wool Suits, Worsted Wool Suit-Type Jackets, and Worsted Wool Trousers. The applicant may either have cut and sewn... average fiber diameters of 18.5 microns or less, suitable for use in making suits, suit-type jackets, and...

Energy Conservation in the Home.

DTIC Science & Technology

1985-01-01

inch of properly applied mineral wool insulation would provide. See Figure 2.1 (2:11...fiber. Mineral wool insulation is available in several different types, including blankets, blown insulation, poured insulation, and batts. Blankets...sidewalls can be insulated by a contractor who will blow in one ot several loose fill materials (National Mineral Wool Insulation Assn. Inc.). Figure 2.2

Steel Wool and Oxygen: A Look at Kinetics

ERIC Educational Resources Information Center

Gordon, James; Chancey, Katherine

2005-01-01

An experiment is demonstrated to determine the percentage of oxygen in air using a pretreated piece of steel wool, which is an alternative to spectroscopic kinetic analysis. Students are able to determine the order of reaction for oxygen in its reaction with the iron in steel wool, and are able to use the existing technology to collect and analyze…

19 CFR 11.12 - Labeling of wool products to indicate fiber content.

Code of Federal Regulations, 2010 CFR

2010-04-01

... an importation of wool products, and pursuant to § 141.113 of this chapter shall demand the immediate.... (e) If the products covered by a notice and demand given pursuant to paragraph (d) of this section... 19 Customs Duties 1 2010-04-01 2010-04-01 false Labeling of wool products to indicate fiber...

Genetic correlations between wool traits and carcass traits in Merino sheep.

PubMed

Mortimer, S I; Hatcher, S; Fogarty, N M; van der Werf, J H J; Brown, D J; Swan, A A; Jacob, R H; Geesink, G H; Hopkins, D L; Edwards, J E Hocking; Ponnampalam, E N; Pearce, K L; Pethick, D W

2017-06-01

Genetic correlations between 29 wool production and quality traits and 14 whole carcass measures and carcass component traits were estimated from the Information Nucleus of 8 flocks managed across a range of Australian sheep production environments and genetically linked. Wool data were from over 5,000 Merino progeny born over 5 yr, whereas carcass data were from over 1,200 wether progeny of over 176 sires, slaughtered at about 21 kg carcass weight, on average. Wool traits included yearling and adult records for wool weight, fiber diameter, fiber diameter variation, staple strength, scoured color, and visual scores for breech and body wrinkle. Whole carcass measures included HCW, dressing percentage (DP), and various measures of fat depth and eye muscle dimensions. Carcass components were obtained by dissection, and lean meat yield (LMY) was predicted. Heritability estimates for whole carcass measures ranged from 0.12 ± 0.08 to 0.35 ± 0.10 and ranged from 0.17 ± 0.10 to 0.46 ± 0.10 for carcass dissection traits, with no evidence of important genotype × environment interactions. Genetic correlations indicated that selection for increased clean wool weight will result in reduced carcass fat (-0.17 to -0.34) and DP (-0.48 ± 0.15), with little effect on carcass muscle. Selection for lower fiber diameter will reduce HCW (-0.48 ± 0.15) as well as carcass fat (0.14 to 0.27) and muscle (0.21 to 0.50). There were high genetic correlations between live animal measures of fat and muscle depth and the carcass traits (generally greater than 0.5 in size). Selection to increase HCW (and DP) will result in sheep with fewer wrinkles on the body (-0.57 ± 0.10) and barer breeches (-0.74 ± 0.12, favorable), with minor deterioration in scoured wool color (reduced brightness and increased yellowness). Selection for reduced fat will also result in sheep with fewer body wrinkles (-0.42 to -0.79). Increasing LMY in Merinos through selection would result in a large reduction in carcass fat and DP (-0.66 to -0.84), with a smaller increase in carcass muscle and some increase in wool weight and wrinkles. Although no major antagonisms are apparent between the wool and carcass traits, developing selection indexes for dual-purpose wool and meat breeding objectives will require accurate estimates of genetic parameters to ensure that unfavorable relationships are suitably considered. The findings will aid development of dual-purpose wool and meat breeding objectives.

Association of methionine synthase gene polymorphisms with wool production and quality traits in Chinese Merino population.

PubMed

Rong, E G; Yang, H; Zhang, Z W; Wang, Z P; Yan, X H; Li, H; Wang, N

2015-10-01

Methionine synthase (MTR) plays a crucial role in maintaining homeostasis of intracellular methionine, folate, and homocysteine, and its activity correlates with DNA methylation in many mammalian tissues. Our previous genomewide association study identified that 1 SNP located in the gene was associated with several wool production and quality traits in Chinese Merino. To confirm the potential involvement of the gene in sheep wool production and quality traits, we performed sheep tissue expression profiling, SNP detection, and association analysis with sheep wool production and quality traits. The semiquantitative reverse transcription PCR analysis showed that the gene was differentially expressed in skin from Merino and Kazak sheep. The sequencing analysis identified a total of 13 SNP in the gene from Chinese Merino sheep. Comparison of the allele frequencies revealed that these 13 identified SNP were significantly different among the 6 tested Chinese Merino strains ( < 0.001). Linkage disequilibrium analysis showed that SNP 3 to 11 were strongly linked in a single haplotype block in the tested population. Association analysis showed that SNP 2 to 11 were significantly associated with the average wool fiber diameter and the fineness SD and that SNP 4 to 11 were significantly associated with the CV of fiber diameter trait ( < 0.05). Single nucleotide polymorphism 2 and SNP 5 to 12 were weakly associated with wool crimp. Similarly, the haplotypes derived from these 13 identified SNP were also significantly associated with the average wool fiber diameter, fineness SD, and the CV of fiber diameter ( < 0.05). Our results suggest that is a candidate gene for sheep wool production and quality traits, and the identified SNP might be used in sheep breeding.

Fiber-Content Measurement of Wool-Cashmere Blends Using Near-Infrared Spectroscopy.

PubMed

Zhou, Jinfeng; Wang, Rongwu; Wu, Xiongying; Xu, Bugao

2017-10-01

Cashmere and wool are two protein fibers with analogous geometrical attributes, but distinct physical properties. Due to its scarcity and unique features, cashmere is a much more expensive fiber than wool. In the textile production, cashmere is often intentionally blended with fine wool in order to reduce the material cost. To identify the fiber contents of a wool-cashmere blend is important to quality control and product classification. The goal of this study is to develop a reliable method for estimating fiber contents in wool-cashmere blends based on near-infrared (NIR) spectroscopy. In this study, we prepared two sets of cashmere-wool blends by using either whole fibers or fiber snippets in 11 different blend ratios of the two fibers and collected the NIR spectra of all the 22 samples. Of the 11 samples in each set, six were used as a subset for calibration and five as a subset for validation. By referencing the NIR band assignment to chemical bonds in protein, we identified six characteristic wavelength bands where the NIR absorbance powers of the two fibers were significantly different. We then performed the chemometric analysis with two multilinear regression (MLR) equations to predict the cashmere content (CC) in a blended sample. The experiment with these samples demonstrated that the predicted CCs from the MLR models were consistent with the CCs given in the preparations of the two sample sets (whole fiber or snippet), and the errors of the predicted CCs could be limited to 0.5% if the testing was performed over at least 25 locations. The MLR models seem to be reliable and accurate enough for estimating the cashmere content in a wool-cashmere blend and have potential to be used for tackling the cashmere adulteration problem.

Astronaut Clothing for Exploration Missions

NASA Technical Reports Server (NTRS)

Poritz, Darwin H.; Orndoff, Evelyne; Kaspranskiy, Rustem R.; Schesinger, Thilini; Byrne, Vicky

2016-01-01

Astronaut clothes for exploration missions beyond low Earth orbit need to satisfy several challenges not met by the currently-used mostly-cotton clothing. A laundering system is not expected to be available, and thus soiled garments must be trashed. Jettisoning waste does not seem feasible at this time. The cabin oxygen concentration is expected to be higher than standard, and thus fabrics must better resist ignition and burning. Fabrics need to be identified that reduce logistical mass, that can be worn longer before disposal, that are at least as comfortable as cotton, and that resist ignition or that char immediately after ignition. Human factors and psychology indicate that crew well-being and morale require a variety of colors and styles to accommodate personal identity and preferences. Over the past four years, the Logistics Reduction Project under NASA's Advanced Exploration Systems Program has sponsored the Advanced Clothing System Task to conduct several ground studies and one ISS study. These studies have evaluated length of wear and personal preferences of commercially-available exercise- and routine-wear garments made from several fabrics (cotton, polyester, Merino wool, and modacrylic), woven and knitted. Note that Merino wool and modacrylic char like cotton in ambient air, while polyester unacceptably melts. This paper focuses on the two components of an International Space Station study, onboard and on the ground, with astronauts and cosmonauts. Fabrics were randomized to participants. Length of wear was assessed by statistical survival analysis, and preference by exact binomial confidence limits. Merino wool and modacrylic t-shirts were worn longer on average than polyester t-shirts. Interestingly, self-assessed preferences were inconsistent with length-of-wear behavior, as polyester was preferred to Merino wool and modacrylic.

The Formation and Binding of Gold Nanoparticles onto Wool Fibres

NASA Astrophysics Data System (ADS)

Johnston, James H.; Burridge, Kerstin A.; Kelly, Fern M.

2009-07-01

This paper presents the novel use of nanosize gold with different plasmon resonance colours, as stable colourfast colourants on wool fibres for use in high quality fabrics and textiles. The gold nanoparticles are synthesised by the controlled reduction of Au3+ in the AuCl4- complex to Au0 onto the surface of the wool where they attach to the S in the cystine amino acids in wool keratin proteins. Scanning electronmicroscopy shows the nanoparticles are present on the cuticles of the fibre surface and are concentrated at the edges of these cuticles. EDS analysis shows a strong correlation of Au with S and X-ray photoelectron spectroscopy suggests Au-S bond formation. Hence the nanogold colourants are chemically bound to the wool fibre surface and do not fade as traditional organic dyes do. A range of coloured fibres have been produced.

Assessment of health implications related to processing and use of natural wool insulation products.

PubMed

Mansour, E; Loxton, C; Elias, R M; Ormondroyd, G A

2014-12-01

This paper discusses possible health implications related to dust particles released during the manufacture of sheep's wool-based non-woven insulation material. Such insulation may replace traditional synthetic insulation products used in roofs, wall cavities, etc. A review of the literature concerning organic dusts in general and sheep's wool fiber summarizes dust exposure patterns, toxicological pathways and the hazards imposed by inhalation and explosion risk. This paper highlights a need for more research in order to refrain from overgeneralizing potential pulmonary and carcinogenic risks across the industries. Variables existing between industries such as the use of different wool types, processes, and additives are shown to have varying health effects. Within the final section of the paper, the health issues raised are compared with those that have been extensively documented for the rock and glass wool industries. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Formation and Binding of Gold Nanoparticles onto Wool Fibres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, James H.; Burridge, Kerstin A.; Kelly, Fern M.

2009-07-23

This paper presents the novel use of nanosize gold with different plasmon resonance colours, as stable colourfast colourants on wool fibres for use in high quality fabrics and textiles. The gold nanoparticles are synthesised by the controlled reduction of Au{sup 3+} in the AuCl{sub 4}{sup -} complex to Au{sup 0} onto the surface of the wool where they attach to the S in the cystine amino acids in wool keratin proteins. Scanning electronmicroscopy shows the nanoparticles are present on the cuticles of the fibre surface and are concentrated at the edges of these cuticles. EDS analysis shows a strong correlationmore » of Au with S and X-ray photoelectron spectroscopy suggests Au-S bond formation. Hence the nanogold colourants are chemically bound to the wool fibre surface and do not fade as traditional organic dyes do. A range of coloured fibres have been produced.« less

Development Report for the 10 KW Sound Attenuation Program (Preproduction ’F’ Kit).

DTIC Science & Technology

1981-12-02

3.2 Panel Design The panels were to be constructed from solid aluminum sheet metal on all ex- ; terior surfaces and acoustic fiberglass or mineral ... wool bill overlayed with a synthetic film and encapsulated with perforated aluminum on the interior sur- faces. Per design, the acoustic panels on the

75 FR 59684 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... Service (FAS), denied a petition (No. 2011021) for trade adjustment assistance for wool filed under the... Office of the Chief Economist, Farm Service Agency, Agricultural Marketing Service, and FAS. After a... Programs, FAS, USDA, or by phone at (202) 720-0638, or (202) 690-0633, or by e-mail at: [email protected]fas...

75 FR 59682 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... Service (FAS) has denied a petition (No. 2011005) for trade adjustment assistance for wool filed under the... of the Chief Economist, Farm Service Agency, Agricultural Marketing Service, and FAS. After a review..., Office of Trade Programs, FAS, USDA, or by phone at (202) 720-0638 or (202) 690-0633, or by e-mail at...

European Foundation Designs for Seasonally Frozen Ground

DTIC Science & Technology

1992-03-01

104 173. Design thermal conductivity of mineral wool for frost protection...inside of theo - foundation wall, consisted of 50 mm of Rockwool o3 wallo -"o 0 ° (a mineral wool ). This insulation guides heat from the house down...Thermal Insulation Laboratory 1982.) by introducing mineral wool (Fig. 49c) gives a Table 4. Relationship between floor surface tempera- further slight

Use of Small Angle Neutron Scattering to Study Various Properties of Wool and Mohair Fibres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franklyn, C. B.; Toeroek, Gy.

2011-12-13

To maintain a competitive edge in the wool and mohair industry, a detailed knowledge and understanding of the properties of wool fibres is essential. Standard techniques are used to determine fibre diameter, length and strength; however, properties such as hydroscopicity, lustre and changes in fibre structure following chemical or mechanical treatment are not so well understood. The unique capabilities of small angle neutron scattering to study changes in the supermolecular structure of wool fibres, particularly at the level of the microfibril-matrix complex, have been used to provide previously unknown features of the fibres. The results of these studies are presented.

Improved radiocarbon dating for contaminated archaeological bone collagen, silk, wool and hair samples via cross-flow nanofiltrated amino acids.

PubMed

Boudin, Mathieu; Boeckx, Pascal; Vandenabeele, Peter; Van Strydonck, Mark

2013-09-30

Radiocarbon dating and stable isotope analyses of bone collagen, wool, hair and silk contaminated with extraneous carbon (e.g. humic substances) does not yield reliable results if these materials are pre-treated using conventional methods. A cross-flow nanofiltration method was developed that can be applied to various protein materials like collagen, hair, silk, wool and leather, and should be able to remove low-molecular and high-molecular weight contaminants. To avoid extraneous carbon contamination via the filter a ceramic filter (molecular weight cut-off of 200 Da) was used. The amino acids, released by hot acid hydrolysis of the protein material, were collected in the permeate and contaminants in the retentate (>200 Da). (14)C-dating results for various contaminated archaeological samples were compared for bulk material (pre-treated with the conventional methods) and for cross-flow nanofiltrated amino acids (permeate) originating from the same samples. Contamination and quality control of (14)C dates of bulk and permeate samples were obtained by measuring C:N ratios, fluorescence spectra, and δ(13)C and δ(15)N values of the samples. Cross-flow nanofiltration decreases the C:N ratio which means that contaminants have been removed. Cross-flow nanofiltration clearly improved sample quality and (14)C results. It is a quick and non-labor-intensive technique and can easily be implemented in any (14)C and stable isotope laboratory for routine sample pre-treatment analyses. Copyright © 2013 John Wiley & Sons, Ltd.

Extension in Tough Times--Addressing Failures in Public and Private Extension, Lessons from the Tasmanian Wool Industry, Australia

ERIC Educational Resources Information Center

Hunt, Warren; Coutts, Jeff

2009-01-01

This paper reports research on the impact of introducing a range of extension approaches into the wool-growing regions of Tasmania Australia to meet an emerging knowledge and skills gap in the sector. The wool-growing industry of the state has experienced minimal government extension support for over 15 years. There is a failure in both private…

Asbestos Removal in the Construction Industry.

DTIC Science & Technology

1991-01-01

a lower strength lighter building panel. 5.3.3 Sprayed Coatings Mineral wool fiber and vermiculite have replaced asbestos in sprayed coating...wearing resistance and non- slip properties in floor tiles. Glass or mineral wool fibers may be used as alternative fibers, but make for a brittle...asbestos, for many applications, is millboard made from aluminosilicate fibers or mineral wool fibers. These fibers are bonded with a high temperature

USSR Report, Construction and Equipment, No. 78.

DTIC Science & Technology

1982-11-26

synthetic binder, fabricated by the Rostov Rigid Mineral - Wool Panels Plant of the USSR Mintyazhstroy, did not meet the requirements for...Minstroymaterialov, the Riga Cement-Slate Plant of the Latvian SSR Minstroymaterialov, and the Rostov Rigid Mineral - Wool Panels Plant of the USSR Mintyazhstroy. At...many plants, mineral - wool products are stored improperly, violating the standards— about 70 percent of the products is stored outdoors. Laboratory

78 FR 56657 - Notice of Solicitation of Applications for Allocation of Tariff Rate Quotas on the Import of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... for Allocation of Tariff Rate Quotas on the Import of Certain Worsted Wool Fabrics to Persons Who Cut... fabric to persons who cut and sew men's and boys' worsted wool suits, suit-type jackets and trousers in..., corporations, or other legal entities) who cut and sew men's and boys' worsted wool suits, suit-type jackets...

77 FR 58524 - Notice of Solicitation of Applications for Allocation of Tariff Rate Quotas on the Import of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... for Allocation of Tariff Rate Quotas on the Import of Certain Worsted Wool Fabrics to Persons Who Cut... fabric to persons who cut and sew men's and boys' worsted wool suits, suit-type jackets and trousers in..., corporations, or other legal entities) who cut and sew men's and boys' worsted wool suits, suit-type jackets...

75 FR 54598 - Notice of Solicitation of Applications for Allocation of Tariff Rate Quotas on the Import of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-08

... for Allocation of Tariff Rate Quotas on the Import of Certain Worsted Wool Fabrics to Persons Who Cut... fabric to persons who cut and sew men's and boys' worsted wool suits, suit-type jackets and trousers in..., corporations, or other legal entities) who cut and sew men's and boys' worsted wool suits and suit-like jackets...

76 FR 58465 - Notice of Solicitation of Applications for Allocation of Tariff Rate Quotas on the Import of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... for Allocation of Tariff Rate Quotas on the Import of Certain Worsted Wool Fabrics to Persons Who Cut... persons who cut and sew men's and boys' worsted wool suits, suit-type jackets and trousers in the United..., or other legal entities) who cut and sew men's and boys' worsted wool suits and suit-like jackets and...

Jet Engine Exhaust Analysis by Subtractive Chromatography

DTIC Science & Technology

1978-12-01

FID B response = oxygenates + aromatics. Oxygenated compounds with 8 Tenax GC Carbosieve B Glass Wool Glass wool Glass Wool Sample Flow Desoption...sorbent samplinq. During the process of compiling this information a new series of sorbent materials that show promising sorbent characteristics was...produced by a process which "carbonizes" a porous polymer material. The pro- duct is a hard, shiny, black-beaded material. The promotional literature

Synthetic vitreous fibers: a review of toxicology research and its impact on hazard classification.

PubMed

Hesterberg, T W; Hart, G A

2001-01-01

Because the inhalation of asbestos, a naturally occurring, inorganic fibrous material, is associated with lung fibrosis and thoracic cancers, concerns have been raised about the possible health effects of synthetic vitreous fibers (SVFs). SVFs include a very broad variety of inorganic fibrous materials with an amorphous molecular structure. Traditionally, SVFs have been divided into three subcategories based on composition: fiberglass, mineral wool (rock, stone, and slag wools), and refractory ceramic fiber. For more than 50 years, the toxicologic potential of SVFs has been researched extensively using human epidemiology and a variety of laboratory studies. Here we review the research and its impact on hazard classification and regulation of SVFs. Large, ongoing epidemiology studies of SVF manufacturing workers have provided very little evidence of harmful effects in humans. Several decades of research using rodents exposed by inhalation have confirmed that SVF pulmonary effects are determined by the "Three D's", fiber dose (lung), dimension, and durability. Lung dose over time is determined by fiber deposition and biopersistence in the lung. Deposition is inversely related to fiber diameter. Biopersistence is directly related to fiber length and inversely related to fiber dissolution and fragmentation rates. Inhaled short fibers are cleared from the lung relatively quickly by mobile phagocytic cells, but long fibers persist until they dissolve or fragment. In contrast to asbestos, most of the SVFs tested in rodent inhalation studies cleared rapidly from the lung (were nonbiopersistent) and were innocuous. However, several relativley biopersistent SVFs induced chronic inflammation, lung scarring (fibrosis), and thoracic neoplasms. Thus, biopersistence of fibers is now generally recognized as a key determinant of the toxicologic potential of SVFs. In vitro dissolution of fibers in simulated extracellular fluid correlates fairly well with fiber biopersistence in the lung and pulmonary toxicity, but several exceptions suggest that biopersistence involves more than dissolution rate. Research demonstrating the relationship between biopersistence and SVF toxicity has provided a scientific basis for hazard classification and regulation of SVFs. For a nonhazardous classification, legislation recently passed by the European Union requires a respirable insulation wool to have a low lung-biopersistence or be noncarcinogenic in laboratory rats. U.S. fiberglass and mineral wool industries and the Occupational Health and Safety Administration (OSHA) have formed a voluntary Health and Safety Partnership Program (HSPP) that include: a voluntary permissible exposure level (PEL) in the workplace of 1 fiber/cc, a respiratory protection program for specified tasks, continued workplace air monitoring, and, where possible, the development of fiber formulations that do not persist in the lung. RCF manufacturers have implemented a Product Stewardship Program that includes: a recommended exposure guideline of 0.5 fibers/cc; a 5-year workplace air monitoring program; and research into the development of high-temperature-resistant, biosoluble fibers.

Ignition characteristics of some aircraft interior fabrics

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Brandt, D. L.

1978-01-01

Six samples of aircraft interior fabrics were evaluated with regard to resistance to ignition by radiant heat. Five samples were aircraft seat upholstery fabrics and one sample was an aircraft curtain fabric. The aircraft seat fabrics were 100% wool (2 samples), 83% wool/17% nylon, 49% wool/51% polyvinyl chloride, and 100% rayon. The aircraft curtain fabric was 92% modacrylic/8% polyester. The five samples of aircraft seat upholstery fabrics were also evaluated with regard to resistance to ignition by a smoldering cigarette. The four samples of wool-containing aircraft seat fabrics appeared to be superior to the sample of rayon seat fabric in resistance to ignition, both by radiant heat and by a smoldering cigarette.

An Evaluation of Vegetated Roofing Technology: Application at Air Force Plant Four, Building 15

DTIC Science & Technology

2004-03-01

layer of mineral wool , or recycled foam, or even installing a membrane that has water-absorbing crystals built-in. Adding more water retention...Sarnafil membrane has inherent root protection. Insulation: Eight cm thick hydroscopic mineral wool located under the waterproofing membrane...Drainage: Xero Drain, developed by Xeroflor. Growing medium: Four cm of mineral wool . This is a very lightweight material with excellent water

USSR Report, Energy, No. 152.

DTIC Science & Technology

1983-06-17

384,000 cubic meters of mineral wool are shipped annually. Five thousand freight cars are needed for their shipment. However, the organization of the...production of such a quantity of mineral wool directly at the places of consumption from imported starting raw material with the use of local type...manufacturers often simply make the appearance of a package. How else can one speak of packaging of mineral wool in wrapping paper. This thermal

Cellulosic/wool pigment prints with remarkable antibacterial functionalities.

PubMed

Ibrahim, N A; Eid, B M; Khalil, H M

2015-01-22

Several bio-active agents namely choline chloride, triclosan derivative, PEG-600 and 4-hydroxybenzophenone were successfully included into solvent-free pigment formulations, in a single-stage process, followed by screen printing and microwave-fixation to obtain antibacterial functionalized cellulosic/wool pigment prints. Results obtained signify that both the improvement in functionalization and coloration properties are governed by type of antibacterial agent, kind of substrate as well as pigment colorant. The imparted antibacterial activity of the loaded bio-active agents follows the decreasing order: G+ve (Staphylococcus aureus)>G-ve (Escherichia coli), keeping other parameters constant. The imparted functional and coloration properties showed no significant decrease even after 15 washings. Mode of interactions among the nominated substrates, the pigment paste constituents and the bioactive agents were also proposed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age

PubMed Central

Schroeder, Oskar; Benecke, Norbert; Frölich, Kai; Peng, Zuogang; Kaniuth, Kai; Sverchkov, Leonid; Reinhold, Sabine; Belinskiy, Andrey; Ludwig, Arne

2017-01-01

Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia. PMID:28632161

Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age.

PubMed

Schroeder, Oskar; Benecke, Norbert; Frölich, Kai; Peng, Zuogang; Kaniuth, Kai; Sverchkov, Leonid; Reinhold, Sabine; Belinskiy, Andrey; Ludwig, Arne

2017-06-20

Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia.

Investigation of Immunoregulatory Alphaglobulin (IRA) in Shock and Trauma.

DTIC Science & Technology

1980-07-01

rice whose limbs were amputated 2 days earlier Were fraction by adherence to glass Petri dishes or nylon wool columns (2 cycl,7), or by treatin Wi...to alloantigens. suggesting the presence of suppressor cells. The suppressor cells were found to adhere to glass and to nylon wool columns. They were...negative cell population capable of adhering to glass and nylon wool, Presumably macrophages. was responsible for inhibiting the response of lymphocytes

Control of Asymmetric Jet

DTIC Science & Technology

1992-06-30

with 5hciir Irycr frequencies arnd miodfy th-e preferied mode. Perforte~d steel plateCs "-leed with tempcratuze-resistatr: mnsulativ- mineral wool reduce...Insulation of the Jet facility was initially ... ovid. d 6y ibuiglass, then mineral wool and at the present there is none for health concerns. The...imerior of the jet’s anechoic chamber was also insulated with mineral wool to foitify acoustic damping, however this too has been removed due to portions

Effect of Wool Components in Pile Fabrics on Water Vapor Sorption, Heat Release, and Humidity Buffering

DTIC Science & Technology

2008-05-01

composition and location of the wool fibers. The fibers consisted of polyester, wool, and polylactic acid (PLA). PLA is a biodegradable , thermoplastic ...5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER...Hygroscopic Porous Polymer Materials,” Journal of Applied Polymer Science 64 (3), pp. 493-505, 1997. 8. Stuart, I., Schneider, A., Turner, T

What Happens during Natural Protein Fibre Dissolution in Ionic Liquids.

PubMed

Chen, Jingyu; Vongsanga, Kylie; Wang, Xungai; Byrne, Nolene

2014-08-28

Here, we monitor the dissolution of several natural protein fibres such as wool, human hair and silk, in various ionic liquids (ILs). The dissolution of protein-based materials using ILs is an emerging area exploring the production of new materials from waste products. Wool is a keratin fibre, which is extensively used in the textiles industry and as a result has considerable amounts of waste produced each year. Wool, along with human hair, has a unique morphology whereby the outer layer, the cuticle, is heavily cross linked with disulphide bonds, whereas silk does not have this outer layer. Here we show how ILs dissolve natural protein fibres and how the mechanism of dissolution is directly related to the structure and morphology of the wool fibre.

A Carbon Free Filter for Collection of Large Volume Samples of Cellular Biomass from Oligotrophic Waters

PubMed Central

Mailloux, Brian J.; Dochenetz, Audra; Bishop, Michael; Dong, Hailiang; Ziolkowski, Lori A.; Wommack, K. Eric; Sakowski, Eric G.; Onstott, Tullis C.; Slater, Greg F.

2018-01-01

Isotopic analysis of cellular biomass has greatly improved our understanding of carbon cycling in the environment. Compound specific radiocarbon analysis (CSRA) of cellular biomass is being increasingly applied in a number of fields. However, it is often difficult to collect sufficient cellular biomass for analysis from oligotrophic waters because easy-to-use filtering methods that are free of carbon contaminants do not exist. The goal of this work was to develop a new column based filter to autonomously collect high volume samples of biomass from oligotrophic waters for CSRA using material that can be baked at 450°C to remove potential organic contaminants. A series of filter materials were tested, including uncoated sand, ferrihydrite-coated sand, goethite-coated sand, aluminum-coated sand, uncoated glass wool, ferrihydrite-coated glass wool, and aluminum-coated glass wool, in the lab with 0.1 and 1.0 µm microspheres and E. coli. Results indicated that aluminum-coated glass wool was the most efficient filter and that the retention capacity of the filter far exceeded the biomass requirements for CSRA. Results from laboratory tests indicate that for oligotrophic waters with 1×105 cells ml−1, 117 L of water would need to be filtered to collect 100 µg of PLFA for bulk PLFA analysis and 2000 L for analysis of individual PLFAs. For field sampling, filtration tests on South African mine water indicated that after filtering 5955 liters, 450 µg of total PLFAs were present, ample biomass for radiocarbon analysis. In summary, we have developed a filter that is easy to use and deploy for collection of biomass for CSRA including total and individual PLFAs. PMID:22561839

Measurement of medullation in wool and mohair using an Optical Fibre Diameter Analyser.

PubMed

Lupton, C J; Pfeiffer, F A

1998-05-01

We conducted three experiments to evaluate the Optical Fibre Diameter Analyser (OFDA) for estimating medullation (med [M], kemp [K], and total [T] medullated fiber content) in mohair and wool produced by Angora goats and sheep, respectively. Medullation can be a beneficial characteristic in certain types of wool, but it is highly undesirable in mohair and apparel wools. Current techniques for evaluating medullation in animal fibers are laborious, slow, and expensive. The OFDA had been modified by the manufacturer to measure fiber opacity distribution, a characteristic known to be indicative of medullation in white fibers, and was capable of providing such measurements in a very short time. Measurements made on magnified fiber images produced with a projection microscope (PM) were used as a reference for M, K, and T in fiber samples. An initial experiment with 124 mohair samples (T = .10 to 9.10%) seemed to indicate that OFDA estimates of M, K, and T were only poorly correlated with corresponding PM values (r2 = .5409, .1401, and .5576, respectively). However, a second experiment using wool and mohair samples containing a wider range of medullation (T = .58 to 26.54%) revealed that OFDA estimates of M, K, and T for wool were highly correlated with PM measurements (r2 = .9853, .9307, and .9728, respectively). Evidence was also obtained indicating that the low r2 values associated with mohair relationships were likely due to a combination of factors: 1) high variation among the standard PM measurements and 2) the relatively low M, K, and T contents of the mohair samples compared with wool. In a third experiment, greater accuracy was obtained in the PM measurements by evaluating many more individual fibers per sample (10,000). In this case, OFDA estimates of M, K, and T for mohair were highly correlated with corresponding PM measurements (r2 = .8601, .9939, and .9696, respectively). However, the two sets of linear regression equations obtained for wool and mohair were somewhat different, indicating that separate calculations should be used to estimate PM measurements from OFDA data. In conclusion, it was demonstrated that the OFDA instrument is capable of providing relatively fast, accurate, and potentially less expensive estimates of medullated fiber characteristics in mohair and wool.

Foundation Design against Frost Action in Europe.

DTIC Science & Technology

1988-03-01

the inside of the foundation wall and consisted of 50mm of ’Rockwool’ (a mineral wool ). This insulation guides heat from the house down toward the...Separation of the floor slab from the inner part of the foundation wall by introducing mineral wool (Fig. 49c) gives a further slight reduction in...construction consisting, for example, of wood and mineral wool and including air spaces. Rt is the thermal resistance of the composite floor from surface to

AICUZ Air Installation Compatible Use Zone Report for Mather Air Force Base, California.

DTIC Science & Technology

1982-09-01

Insulation shall be glass fiber or mineral wool . 1-4 Windows a. Windows other than as described in this sectionshall have a laboratory sound transmission...above. Ceilings shall be substantially airtight, with a minimum number of penetrations. I b. Glass fiber or mineral wool insulation at least 2" thick...throughout the cavity space behind the exterior sheathing and between wall studs. Insulation shall be glass fiber or mineral wool . 2-4 Windows a

Evaluation of European District Heating Systems for Application to Army Installations in the United States

DTIC Science & Technology

2006-07-01

pipes in hooded channels, and the steel insulated pipes are insulated with mineral wool . In the thermo- concrete laying system the insulation...depends on the type foam insulation used. • Class “A” steel carrier pipe with a mineral wool , foam glass, fiber glass, or calcium silicate insulation...with a mineral wool , foam glass, fiber glass, or calcium silicate insulation covered by a steel con- duit, which has a polyurethane foam insulation

Simultaneous sonosynthesis and sonofabrication of N-doped ZnO/TiO2 core-shell nanocomposite on wool fabric: Introducing various properties specially nano photo bleaching.

PubMed

Behzadnia, Amir; Montazer, Majid; Rad, Mahnaz Mahmoudi

2015-11-01

In this study, N-doped ZnO/TiO2 core-shell nanocomposite was successfully sonosynthesized and sonofabricated on wool fabric through a facile one-step method under ambient pressure and low temperature (75-80°C) as a novel photo-catalyst nanocomposite on textile material. The differences between crystalline phase transformation of conventional and ultrasound synthesized N-ZnO/TiO2 has been compared. The influence of different zinc acetate and titanium isopropoxide precursors in the formation of nanocomposite was studied and optimized through response surface methodology. The photocatalytic activity of the sonofabricated catalyst on the wool fabric surface was evaluated through decomposition of Methylene Blue as a model compound under sunlight irradiation. Also, N-doped ZnO/TiO2 nanocomposite sonosynthesized on wool fabric led to photo bleaching of wool fabric due to decomposition of the naturally occurred pigments under daylight irradiation. Further, yellowness index, antibacterial and antifungal activity against Escherichia coli, Staphylococcus aureus and Candida albicans, cell viability, char residual, alkali solubility, mechanical properties and water drop absorption time on the treated wool fabrics were evaluated. Also, the acid solubility of the synthesized nanopowder obtained from sonobath after treatment was characterized in acetic acid indicating higher acid resistance on N-doped ZnO/TiO2 nanocomposite. Copyright © 2015 Elsevier B.V. All rights reserved.

Mortality patterns of rock and slag mineral wool production workers: an epidemiological and environmental study.

PubMed Central

Robinson, C F; Dement, J M; Ness, G O; Waxweiler, R J

1982-01-01

An epidemiological and environmental study of rock and slag mineral wool production workers was undertaken at a plant that has been in operation since the early 1900s. Size characteristics of fibres produced by each process at the plant and data from industrial hygiene surveys were used to evaluate current and past exposures. These data suggest that the average historical airborne fibre concentration probably did not exceed 2.5 fibres/cc before 1935 and 1.0 fibre/cc after 1935. A retrospective cohort mortality study was designed to assess mortality patterns. Detailed occupational histories were compiled on all plant employees. All jobs in the plant were assigned to one of eight potential exposure categories to assess the extent and severity of mineral wool exposure and the effect of other significant exposures on employee mortality. Findings included an increase in the number of deaths due to cancer of the digestive system and non-malignant respiratory disease among workers who had over 20 years' exposure to mineral wool or who had survived 20 years since their first exposure to mineral wool. These findings are not inconsistent with those of Enterline's (Symposium on Biological Effects of Mineral Fibres, Lyon, France, September 1979) in the Thermal Insulation Manufacturers' Association's mortality study of men employed in four mineral wool plants. PMID:6279138

Cost-Benefit and Performance of Handmade Carpets Produced with Wool, Untreated and Chemical Treated Jute Pile Yarns

NASA Astrophysics Data System (ADS)

Gupta, Shravan Kumar; Goswami, Kamal Kanti

2018-03-01

Jute is a natural fibre which is used to make different type of products due to low cost, easy availability and eco-friendliness. However, the stiffness and harshness of jute fibre affect the use of jute in many products like pile yarns in hand knotted carpets. In this research, a study has been done on the application of jute pile yarns in Persian hand knotted carpet. Three types of commercial yarns (wool, untreated jute and woollenized jute) as well as three types of chemical treated jute yarns (hydrogen peroxide bleached, softened bleached and woollenized yarns) have been applied as pile yarns in Persian hand knotted carpets. Cost-benefit analysis of hand knotted carpets shows that manufacturing cost of wool carpet is lower than others. The contribution of manpower charges is higher than material cost during carpet manufacturing. Hand knotted carpet shows the lowest pile abrasion loss and highest compression recovery when wool is used as pile. Wool hand knotted carpet shows higher compression than untreated and treated jute carpets.

Rapid sonosynthesis of N-doped nano TiO2 on wool fabric at low temperature: introducing self-cleaning, hydrophilicity, antibacterial/antifungal properties with low alkali solubility, yellowness and cytotoxicity.

PubMed

Behzadnia, Amir; Montazer, Majid; Rashidi, Abousaeid; Mahmoudi Rad, Mahnaz

2014-01-01

Nano nitrogen-doped titanium dioxide was rapidly prepared by hydrolysis of titanium isopropoxide at 75-80°C using in situ sonochemical synthesis by introducing ammonia. Various concentrations of titanium isopropoxide were examined to deposit nano nitrogen-doped titanium dioxide through impregnation of the wool fabric in ultrasound bath followed by curing. The antibacterial/antifungal activities of wool samples were assessed against two common pathogenic bacteria including Escherichia coli and Staphylococcus aureus and the diploid fungus Candida albicans. The sonotreated wool fabrics indicated no adverse effects on human dermal fibroblasts. The presence of nanoparticles on the sonotreated wool fabrics were confirmed by FE-SEM images and EDS patterns and X-ray mapping and the crystalline size of nanoparticles were estimated through XRD results. The role of both pH and precursor concentration on the various properties of the fabric was investigated and the optimized conditions introduced using response surface methodology. © 2014 The American Society of Photobiology.

Detection of third-hand smoke on clothing fibers with a surface acoustic wave gas sensor

PubMed Central

Cheng, Chi-Yung; Huang, Shih-Shen; Yang, Chia-Min; Tang, Kea-Tiong

2016-01-01

Third-hand smoke (THS) is a new cigarette-related issue defined as the residual contamination from cigarette smoke after a cigarette is extinguished. To detect THS on three commonly used clothing fibers—wool, cotton, and polyester, we applied two methods to measure the adsorption of THS: one was the gain of mass with an analytical balance after exposure to cigarette smoke; and the other was to detect the THS chemical compounds such as nicotine and 3-ethenylpyridine with a surface acoustic wave (SAW) sensor composed of coated oxidized hollow mesoporous carbon nanospheres. In the mass measurement, the gain of mass decreased in the order wool, cotton, and polyester; the latter gain was about one tenth that of wool. In the SAW detection, the frequency shift decreased in the same order—wool, cotton, and polyester. The residence period of THS on natural fiber (wool and cotton) is greater than on synthetic polyester fiber. These two tests provide quantitative results of THS on varied clothing fibers, to assess their risk after exposure to cigarette smoke. PMID:26909119

Cost-Benefit and Performance of Handmade Carpets Produced with Wool, Untreated and Chemical Treated Jute Pile Yarns

NASA Astrophysics Data System (ADS)

Gupta, Shravan Kumar; Goswami, Kamal Kanti

2018-06-01

Jute is a natural fibre which is used to make different type of products due to low cost, easy availability and eco-friendliness. However, the stiffness and harshness of jute fibre affect the use of jute in many products like pile yarns in hand knotted carpets. In this research, a study has been done on the application of jute pile yarns in Persian hand knotted carpet. Three types of commercial yarns (wool, untreated jute and woollenized jute) as well as three types of chemical treated jute yarns (hydrogen peroxide bleached, softened bleached and woollenized yarns) have been applied as pile yarns in Persian hand knotted carpets. Cost-benefit analysis of hand knotted carpets shows that manufacturing cost of wool carpet is lower than others. The contribution of manpower charges is higher than material cost during carpet manufacturing. Hand knotted carpet shows the lowest pile abrasion loss and highest compression recovery when wool is used as pile. Wool hand knotted carpet shows higher compression than untreated and treated jute carpets.

What Happens during Natural Protein Fibre Dissolution in Ionic Liquids

PubMed Central

Chen, Jingyu; Vongsanga, Kylie; Wang, Xungai; Byrne, Nolene

2014-01-01

Here, we monitor the dissolution of several natural protein fibres such as wool, human hair and silk, in various ionic liquids (ILs). The dissolution of protein-based materials using ILs is an emerging area exploring the production of new materials from waste products. Wool is a keratin fibre, which is extensively used in the textiles industry and as a result has considerable amounts of waste produced each year. Wool, along with human hair, has a unique morphology whereby the outer layer, the cuticle, is heavily cross linked with disulphide bonds, whereas silk does not have this outer layer. Here we show how ILs dissolve natural protein fibres and how the mechanism of dissolution is directly related to the structure and morphology of the wool fibre. PMID:28788183

Underwriters Laboratories Fire Tests of Sprayed Polyurethane Foam Applied Directly to Metal Roof Decks.

DTIC Science & Technology

1983-12-01

with 1 in. mineral wool insulation positioned on the tunnel ledges to provide a more positive seal. These tests will be identified with the letter "I...during test minus 4-1/2 ft igniting flame. (1) - Mineral wool insulation positioned on the tunnel ledges. -A41 File USNC77 Issued: 12-29-78... Mineral wool insulation positioned on the tunnel ledges. ,-A2 Fie SNśIsud: 12297 ;. "’"’._." "-...:. " ., , ’ "’" .k

Investigation of Tri-Service Heat Distribution Systems (Modernization of Existing Underground Heat Distribution Systems).

DTIC Science & Technology

1984-06-01

carrier pipe is usually insulated with preformed calcium silicate or mineral wool insulation. The preformed insula- tion is secured with stainless steel...glass or mineral wool insula- tion. Each tile is installed in this manner. Repair is difficult, but can be done by local workers with readily available...corrosion S Site I and return lines in of condensate line ( mineral wool insulation). 2. Ft. Campbell, 12 Tile system B No insulation was installed on

Field Measurements of Heat Losses from Three Types of Heat Distribution Systems

DTIC Science & Technology

1991-11-01

with the supply pipe on top of the 2.5-in.-thick mineral wool in each case. return pipe. The conduit has an outer diameter of ap- proximately 20 in...is 5-in. NPS schedule 40 steel. Each pipe is insulated with Instrumentation layout 2.5 in. of mineral wool pipe insulation. The location of the...common Only two manufacturers of mineral wool insulation conduit, trench and individual conduit sites, respec- have a product approved for use on

Holographic Lens for Pilot’s Head-Up Display

DTIC Science & Technology

1975-04-01

in fringe stability. A 5 ft x 9 ft x 40 in. high acoustical enclosure, constructed with six lb/ft3 mineral wool sand- wiched between a solid 24 gauge...VIBRATION ISOLATION A 5 ft x 9 ft x 40 in. high acoustic enclosure, consisting of 6 lb. /ft 3 mineral wool sandwiched between 24 gauge sheet steel...consists of 6 lb./ft 3 density of mineral wool sandwiched between an inner, 26-gauge, perforated steel panel and an outer, 24-gauge, steel panel. A close

Proceedings of the Conference on Environmental Toxicology (10th) Held in Dayton, Ohio on 13, 14, and 15 November 1979

DTIC Science & Technology

1980-04-01

workers: 6023 workers from 5 fibrous glass manufacturing plants and 1026 workers from 3 mineral wool plants. The total study will include almost 17,000...mortality rates for respiratory cancer did not increase with in- creasing duration of employment. For one mineral wool plant, there were 3 respiratory...expected. Another recent study by Robinson et al. (1979), has reported on a cohort of 596 workers from just one of the mineral wool plants included

Problem Definition Study of Requirements for Vapor Retarders in the Building Envelope.

DTIC Science & Technology

1982-11-01

be used, and that cellular glass should be used rather than fibrous glass, mineral wool , and organic fiber insulation materials. -48- 6 Comment: (This...Oregon area. 71 were insulated with UF-foam, cellulose, and mineral wool ; 25 were uninsulated. q b. All insulated homes had been retrofitted for 3 to...ACHR was 18.7, for mineral wool insulated homes 16.4, for cellulose insulated homes 13.6, and for UF-foam insulated homes 15.2. f. No tracer-gas air

WWII (World War II) Era Building Demolition and Renovation Cost Estimator (ESTER) 1.0 User’s Manual

DTIC Science & Technology

1988-07-01

S.F., fiberglass, R-13 */ Idefine BLO F R19 0.91 /* S.F., fiberglass, R-19 */ Idefine B M RII 0.54 /* S.F., mineral wool , R-1l 1i /define W M RI13...0.81 /* S.F., mineral wool , R-13 */ idefine BLOMR19 1.16 /* S.F., mineral wool , R-19 */ .define BSW C R26 0.91 /* S.F., cellulose, R-26 */ Idefine BL

An Analysis of Changes in Threshold Limit Values Over Time

DTIC Science & Technology

1993-01-01

Metribuzin 21087-64-91 1984 1984 Mevinphos 7786-34-7 1982: 1982 _ _ Mica 12001-26-2 1 I987 1987 1 Mineral wool fiber _ 1987 1 1987 _ i t Molybdenum as Mo...1 _ _ i alpha-Methyl styrene _ __ 1968 6 Metribuzin Mevinphos t Mica _ _ _ Mineral wool fiber _ Molybdenum as Mo _ _ Soluble compounds I_...Metribuzin 0 0 i _ __ Mevinphos 0 0 Mica 0 10 ,0___ Mineral wool fiber 0 0 P _ _ Molybdenum as Mo _ ___ Soluble compounds 0 0 Insoluble compounds 1 j 00 _ i

Building under Cold Climates and on Permafrost. Collection of Papers from a US-Soviet Joint Seminar, Leningrad USSR.

DTIC Science & Technology

1980-12-01

The panels are insulated with PSBS polyurethane foam, FRP-I. and mineral wool . In recent years, several dozen such buildings have been constructed in...vulnerable points in the walls. 37 Different plastic foams and also mineral wool sheets with synthetic binding are used in the USSR for insulating the...middle layer of the panels. Mineral wool sheets are used in the wall panels of buildings having high fire safety requirements (children’s and medical

Modification and Laboratory Evaluation of a Shipboard Multifunctional Waste Incinerator (MFI), Phase II.

DTIC Science & Technology

1982-05-01

mineral wool insulation had delaminated in several areas, causing blockages to the cooling jacket fan. The incinerator walls were now exposed as shown...walls, respec- tively. The insulation is a pressed mineral wool , 2 in. thick. The wire ties, connected to the anchors, were used to support an external...covered with a mineral wool blanket, that was tightly fitted into the 12-in. duct. The seams were covered with a high- temperature silicone rubber to

In Situ Corrosion and Heat Loss Assessment of Two Nonstandard Underground Heat Distribution System Piping Designs

DTIC Science & Technology

2011-06-01

of this specific design consists of a carrier pipe, carrier pipe insulation ( mineral wool ), an annular air space, steel casing, a layer of exterior...excavation site agree with Perma-Pipe “Multi-Therm 500” nominal specs for 10” carrier with 2” mineral wool insulation. 3. Conduit Temperature: Supply...the ASHRAE calculation method or by manufacturer performance claims. MEC is reasonably certain that the mineral wool insulation used by the

NO[sub x] reduction by sulfur tolerant coronal-catalytic apparatus and method

DOEpatents

Mathur, V.K.; Breault, R.W.; McLarnon, C.R.; Medros, F.G.

1992-09-15

This invention presents an NO[sub x] environment effective reduction apparatus comprising a sulfur tolerant coronal-catalyst such as high dielectric coronal-catalysts like glass wool, ceramic-glass wool or zirconium glass wool and method of use. In one embodiment the invention comprises an NO[sub x] reduction apparatus of sulfur tolerant coronal-catalyst adapted and configured for hypercritical presentation to an NO[sub x] bearing gas stream at a minimum of at least about 75 watts/cubic meter. 7 figs.

NO.sub.x reduction by sulfur tolerant coronal-catalytic apparatus and method

DOEpatents

Mathur, Virendra K.; Breault, Ronald W.; McLarnon, Christopher R.; Medros, Frank G.

1993-01-01

This invention presents an NO.sub.x environment effective reduction apparatus comprising a sulfur tolerant coronal-catalyst such as high dielectric coronal-catalysts like glass wool, ceramic-glass wool or zirconium glass wool and method of use. In one embodiment the invention comprises an NO.sub.x reduction apparatus of sulfur tolerant coronal-catalyst adapted and configured for hypercritical presentation to an NO.sub.x bearing gas stream at a minimum of at least about 75 watts/cubic meter.

NO.sub.x reduction by sulfur tolerant coronal-catalytic apparatus and method

DOEpatents

Mathur, Virendra K.; Breault, Ronald W.; McLarnon, Christopher R.; Medros, Frank G.

1992-01-01

This invention presents an NO.sub.x environment effective reduction apparatus comprising a sulfur tolerant coronal-catalyst such as high dielectric coronal-catalysts like glass wool, ceramic-glass wool or zirconium glass wool and method of use. In one embodiment the invention comprises an NO.sub.x reduction apparatus of sulfur tolerant coronal-catalyst adapted and configured for hypercritical presentation to an NO.sub.x bearing gas stream at a minimum of at least about 75 watts/cubic meter.

NOx reduction by sulfur tolerant coronal-catalytic apparatus and method

DOEpatents

Mathur, V.K.; Breault, R.W.; McLarnon, C.R.; Medros, F.G.

1993-08-31

This invention presents an NO[sub x] environment effective reduction apparatus comprising a sulfur tolerant coronal-catalyst such as high dielectric coronal-catalysts like glass wool, ceramic-glass wool or zirconium glass wool and method of use. In one embodiment the invention comprises an NO[sub x] reduction apparatus of sulfur tolerant coronal-catalyst adapted and configured for hypercritical presentation to an NO[sub x] bearing gas stream at a minimum of at least about 75 watts/cubic meter.

19 CFR 151.67 - Sampling by importer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.67 Sampling by... quantities from the packages of wool or hair designated for examination, provided the bales or bags are...

19 CFR 151.67 - Sampling by importer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.67 Sampling by... quantities from the packages of wool or hair designated for examination, provided the bales or bags are...

19 CFR 151.67 - Sampling by importer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.67 Sampling by... quantities from the packages of wool or hair designated for examination, provided the bales or bags are...

19 CFR 151.67 - Sampling by importer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.67 Sampling by... quantities from the packages of wool or hair designated for examination, provided the bales or bags are...

Multifunctionalization of wool fabrics through nanoparticles: A chemical route towards smart textiles.

PubMed

Mura, Stefania; Greppi, Gianfranco; Malfatti, Luca; Lasio, Barbara; Sanna, Vanna; Mura, Maria Elena; Marceddu, Salvatore; Lugliè, Antonella

2015-10-15

A new approach towards the design of smart nanotextiles with innovative properties is presented. Silica (SiO2), titania (TiO2), and silver (Ag) nanoparticles (NPs), were synthesized without the use of any toxic organic compound and then were used, alone and in combination, to functionalize wool fabrics. Electrostatic forces, influenced by a low pH of the solutions, allowed the interactions between wool fabrics and NPs, enabling a robust functionalization. This was verified by X-ray microfluorescence and visualized by scanning electron microscopy measurements. The antibacterial Ag NPs were embedded in a polymer, alginic acid, to reduce the possible side effect due to their direct contact with the skin. SiO2 NPs, instead, were used to change the hydrophilicity of wool while the functionalization with TiO2 NPs was chosen to provide self-cleaning properties. The antibacterial activity of the fabrics was studied against the bacteria Escherichia coli, while the hydrophilicity of wool was studied by contact angle measurements and the self-cleaning properties were tested by estimating the visible discoloring of a dye stain under sunlight irradiation. Interestingly the combination of three different types of NPs provided the best results. SiO2 and Ag made the wool superhydrophilic providing at the same time the best antibacterial properties, while fabrics with titania (alone or in combination) were hydrophobic and showed the best self-cleaning properties. Copyright © 2015 Elsevier Inc. All rights reserved.

Novel method for synthesis of silver nanoparticles and their application on wool

NASA Astrophysics Data System (ADS)

Boroumand, Majid Nasiri; Montazer, Majid; Simon, Frank; Liesiene, Jolanta; Šaponjic, Zoran; Dutschk, Victoria

2015-08-01

In this study, a new method for the synthesis of silver nanoparticles (AgNPs) suitable to impart antibacterial properties of wool fabric is proposed. AgNPs were synthesized by a biochemical reduction method. An aqueous solution of extracted dye from Pomegranate peel was used as a reducing agent for the synthesis of AgNPs from silver nitrate. The ratio of dye to silver nitrate concentration (RDye/Ag = [Dye]/[AgNO3]) is the influencing factor in the synthesis of silver nanoparticles. The nanoparticles formation was followed by UV/Vis absorption spectroscopy. The size and shape of AgNPs were studied by transmission electron microscopy (TEM). The size distribution and Zetapotential of nanoparticles were evaluated using diffraction light scattering (DLS) measurements. The antibacterial potential of biosynthesized silver nanoparticles against Escherichia coli (E. coli) was examined qualitatively and quantitatively. Kinetic analysis of the bacteria reduction using AgNPs synthesized in different way was performed. AgNPs were applied on wool fabrics by exhaustion. The changes in surface morphology of wool fibers after AgNPs loading were studied using scanning electron microscopy (SEM). The amounts of silver deposited on wool fabrics at different pH and temperature were compared applying energy-dispersive X-ray spectroscopy (EDX). AgNPs loaded fabrics showed excellent antibacterial efficiency even after five washing cycles. To investigate the nature of interaction and bonding between the AgNPs and the wool substrate XPS measurements were performed.

Multifunctional AgNPs@Wool: colored, UV-protective and antioxidant functional textiles

NASA Astrophysics Data System (ADS)

Shabbir, Mohd; Mohammad, Faqeer

2018-02-01

Nanomaterials have great impact on textile industry for multifunctional and smart clothing as per the need of present, and further, green nanotechnology is the current hotspot of research and industrial developments. Silver nanoparticles (AgNPs) are synthesized (in situ) by using natural compounds of plant extracts (naphthoquinones, phenolics/flavonoids, polyphenols) as reducing or stabilizing agents, and simultaneously deposited on wool fabric for coloration, UV protection and antioxidant properties. UV-visible spectroscopy is used to monitor the route of biosynthesis of nanoparticles and transmission electron microscopy for morphological characteristics of synthesized AgNPs. Spherical and almost oval-shaped AgNPs were synthesized by naphthoquinones, polyphenols and flavonoids, respectively. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction pattern (XRD) and Fourier transform infrared spectroscopy were used for the AgNPs@Wool fabrics characterization. SEM-EDX analysis and XRD patterns confirmed the successful deposition of silver nanoparticles on wool. Coloration characteristics in terms of color strength (K/S) and CIEL*a*b*c*h° values, UV protection abilities in terms of UV transmittance and UV protection factor, and % antioxidant activity of AgNPs@Wool are suggestive of good-to-excellent results.

Dyed in the Wool.

ERIC Educational Resources Information Center

Kinsey, Lori Jean

1984-01-01

Procedures for dying and mordanting wool fibers and for preparing dyes from red onion skin, purple cabbage, pine needles, and purple lilac are presented. Information on the history of dyes and on how dyes work is included. (JN)

19 CFR 151.75 - Final determination of clean yield.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.75... upon a consideration of all the tests made in connection with the wool or hair concerned. [T.D. 73-175...

19 CFR 151.70 - Method of sampling by Customs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.70... feasible to obtain a representative general sample of the wool or hair in a sampling unit or to test such a...

19 CFR 151.70 - Method of sampling by Customs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.70... feasible to obtain a representative general sample of the wool or hair in a sampling unit or to test such a...

19 CFR 151.75 - Final determination of clean yield.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.75... upon a consideration of all the tests made in connection with the wool or hair concerned. [T.D. 73-175...

19 CFR 151.75 - Final determination of clean yield.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.75... upon a consideration of all the tests made in connection with the wool or hair concerned. [T.D. 73-175...

19 CFR 151.70 - Method of sampling by Customs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.70... feasible to obtain a representative general sample of the wool or hair in a sampling unit or to test such a...

19 CFR 151.70 - Method of sampling by Customs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.70... feasible to obtain a representative general sample of the wool or hair in a sampling unit or to test such a...

19 CFR 151.70 - Method of sampling by Customs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.70... feasible to obtain a representative general sample of the wool or hair in a sampling unit or to test such a...

19 CFR 151.75 - Final determination of clean yield.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.75... upon a consideration of all the tests made in connection with the wool or hair concerned. [T.D. 73-175...

19 CFR 151.75 - Final determination of clean yield.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.75... upon a consideration of all the tests made in connection with the wool or hair concerned. [T.D. 73-175...

Study of inflammatory responses to crocidolite and basalt wool in the rat lung.

PubMed

Adamis, Z; Kerényi, T; Honma, K; Jäckel, M; Tátrai, E; Ungváry, G

2001-03-09

The subacute effects of crocidolite and basalt wool dusts were studied by nmeans of biochemical, morphological. and histological methods 1 and .3 mo after intrabronchial instillation. The cell count, protein and phospholipid contents, and lactate dehydrogenase (LDH) activity were determined in the bronchoalveolar lavage (BAL). Both types of fibers induced a prolonged inflammatory reaction in the lung. All the parameters studied in the experimental groups were more markedly elevated after 3 mo. Relative to the control, the protein and LDH values were increased three- to fivefold, the phospholipid content twofold, and the number of free cells in the BAL exceeded the control level up to ninefold. The inflammatory responses to crocidolite and basalt wool in the lung did not differ significantly. In spite of this, basalt wool is recoinmended as an asbestos substitute, as the use of this man-nade fiber may result in a significantly lower release of dust than that from crocidolite.

Magnetite nanoparticles coated glass wool for As(V) removal from drinking water

NASA Astrophysics Data System (ADS)

Kango, Sarita; Kumar, Rajesh

2015-08-01

Arsenic (As) removal from contaminated groundwater is a key environmental concern worldwide. In this study, glass wool was coated with magnetite nanoparticles under argon gas flow and magnetite coated glass wool have been investigated for application as an adsorbent for As(V) removal from water. The adsorbent was characterized by using Scanning Electron Microscopy (SEM) and arsenic contaminated water treated with adsorbent was analyzed by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). The ICP-MS results showed that 10 g/L of adsorbent removed 99.4% of As(V) within 5 hours at pH-7 and initial arsenic concentration of 360µg/L. Adsorption kinetics data fitted well in pseudo-first-order kinetics model with high correlation coefficient (R2 = 0.995). As magnetite nanoparticles coated glass wool showed favorable adsorption behavior for As(V), it can be a promising tool for water purification.

Magnetite nanoparticles coated glass wool for As(V) removal from drinking water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kango, Sarita; Kumar, Rajesh, E-mail: rajesh.kumar@juit.ac.in

2015-08-28

Arsenic (As) removal from contaminated groundwater is a key environmental concern worldwide. In this study, glass wool was coated with magnetite nanoparticles under argon gas flow and magnetite coated glass wool have been investigated for application as an adsorbent for As(V) removal from water. The adsorbent was characterized by using Scanning Electron Microscopy (SEM) and arsenic contaminated water treated with adsorbent was analyzed by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). The ICP-MS results showed that 10 g/L of adsorbent removed 99.4% of As(V) within 5 hours at pH-7 and initial arsenic concentration of 360µg/L. Adsorption kinetics data fitted well inmore » pseudo-first-order kinetics model with high correlation coefficient (R{sup 2} = 0.995). As magnetite nanoparticles coated glass wool showed favorable adsorption behavior for As(V), it can be a promising tool for water purification.« less

Thermally conductive metal wool-silicone rubber material can be used as shock and vibration damper

NASA Technical Reports Server (NTRS)

Hough, W. W.

1964-01-01

Bronze wool pads, impregnated with silicon rubber, meet the requirement for a thermally conductive, shock and vibration absorbing material. They serve as spacers in equipment mounting and are resistant to high temperatures.

19 CFR 151.74 - Retest at port director's request.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.74... results of such test, proceed to have another test made upon a suitable sample of the wool or hair at the...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.74 - Retest at port director's request.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.74... results of such test, proceed to have another test made upon a suitable sample of the wool or hair at the...

19 CFR 151.74 - Retest at port director's request.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.74... results of such test, proceed to have another test made upon a suitable sample of the wool or hair at the...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.74 - Retest at port director's request.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.74... results of such test, proceed to have another test made upon a suitable sample of the wool or hair at the...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.74 - Retest at port director's request.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF THE TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.74... results of such test, proceed to have another test made upon a suitable sample of the wool or hair at the...

16 CFR 301.32 - Fur product containing material other than fur.

Code of Federal Regulations, 2010 CFR

2010-01-01

... required under this Act; as for example: 100% Wool Interlining—100% Recycled Wool Trim—Dyed Muskrat Fur... required under the Act and rules and regulations; as for example: Body—Leather Trim—Dyed Mink [26 FR 3187...

16 CFR 301.32 - Fur product containing material other than fur.

Code of Federal Regulations, 2011 CFR

2011-01-01

... required under this Act; as for example: 100% Wool Interlining—100% Recycled Wool Trim—Dyed Muskrat Fur... required under the Act and rules and regulations; as for example: Body—Leather Trim—Dyed Mink [26 FR 3187...

Axial compression behaviour of reinforced wallettes fabricated using wood-wool cement panel

NASA Astrophysics Data System (ADS)

Noh, M. S. Md; Kamarudin, A. F.; Mokhatar, S. N.; Jaudin, A. R.; Ahmad, Z.; Ibrahim, A.; Muhamad, A. A.

2018-04-01

Wood-wool cement composite panel (WWCP) is one of wood based composite material that produced in a stable panel form and suitable to be used as building wall system to replace non-ecofriendly material such as brick and other masonry element. Heavy construction material such as brick requires more manpower and consume a lot of time to build the wall panel. WWCP is a lightweight material with a density range from 300 kg/m3 to 500 kg/m3 and also capable to support an imposed load from the building. This study reported on the axial compression behaviour of prefabricated reinforced wallettes constructed with wood-wool cement panel. A total of six specimens were fabricated using two layers of cross laminated WWCP bonded with normal mortar paste (Portland cement) at a mix ratio of 1:3 (cement : sand). As part of lifting mechanism, the wallettes were equipped with three steel reinforcement (T12) that embedded inside the core of wallettes. Three replicates of wallettes specimens with dimension 600 mm width and 600 mm length were fabricated without surface plaster and with 16 mm thickness of surface plaster. The wallettes were tested under axial compression load after 28 days of fabrication until failure. The result indicated that, the application of surface plaster significantly increases the loading capacity about 35 % and different orientation of the panels improve the bonding strength of the wall.

7 CFR 5.2 - Marketing season average price data.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Nonbasic Commodities Tung nuts; honey, wholesale extracted. Wool and Mohair Wool and mohair. Other Nonbasic... market Artichokes, asparagus, snap beans, broccoli, cabbage, cantaloupe, carrots, cauliflower, celery..., spinach, tomatoes, and watermelons. vegetables for processing Asparagus, lima beans, snap beans, beets...

7 CFR 5.2 - Marketing season average price data.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Nonbasic Commodities Tung nuts; honey, wholesale extracted. Wool and Mohair Wool and mohair. Other Nonbasic... market Artichokes, asparagus, snap beans, broccoli, cabbage, cantaloupe, carrots, cauliflower, celery..., spinach, tomatoes, and watermelons. vegetables for processing Asparagus, lima beans, snap beans, beets...

East Europe Report

DTIC Science & Technology

1987-03-02

products of the prefabrication industry rose by 2.6 percent. The plan was overfulfilled with 101.2 percent. In par- ticular, mineral wool and... mineral wool products, calcareous sandsontes, wall tiles, doors, windows, and asbestos cement pressure pipes were manufactured in excess of the plan

Exploratory Studies on the Design of Acoustic Splitters for Wind Tunnels.

DTIC Science & Technology

1980-01-02

materials. Material Flow resistance Density (rayls/m) (kg/m3) Polyether foam (Type A) 0.5 x 104 35 (Type B) 1.2 x 104 42 Mineral wool (Type A) 4.4 x 104...mks rayls/m for the main splitters in the 5ft tunnel would be well matched by using mineral wool (Type B) as the absorbent material. On the other hand...walls of the duct. Predic- ted values of noise attenuation for mineral - wool splitters separated by air gaps of 38 m, 70 mm and 165 mm are shown in Fig 12

Energy and Process Optimization Assessment at U.S. Army Installation in Germany: Keiserslautern Army Depot, Piermasens Army Depot, Katterbach Kaserne, Storck Barracks in Illesheim, and U.S. Army Garrison Wiesbaden Schools

DTIC Science & Technology

2007-09-01

Solution Paint the ceiling white with paint suitable for mineral wool surfaces. Also a white surface material is possible—this would keep fibers...from the mineral wool from being carried into the indoor air by air movement. 4.2.19.3 Savings No saving can be indicated; the lights in the...concrete panels be- tween reinforced concrete columns. The concrete panels are covered from the outside with about 4 cm of mineral wool , 2 cm ventilated

Glass-wool study of laser-induced spin currents en route to hyperpolarized Cs salt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishikawa, Kiyoshi

2011-07-15

The nuclear spin polarization of optically pumped Cs atoms flows to the surface of Cs hydride in a vapor cell. A fine glass wool lightly coated with the salt helps greatly increase the surface area in contact with the pumped atoms and enhance the spin polarization of the salt nuclei. Even though the glass wool randomly scatters the pump light, the atomic vapor can be polarized with unpolarized light in a magnetic field. The measured enhancement in the salt enables study of the polarizations of light and atomic nuclei very near the salt surface.

40 CFR 63.1381 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... wool fiberglass to which a phenol-formaldehyde binder has been applied. Building insulation means bonded wool fiberglass insulation, having a loss on ignition of less than 8 percent and a density of less... charger systems, heat exchangers, melter cooling system, exhaust system, refractory brick work, fuel...

40 CFR 63.1381 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... wool fiberglass to which a phenol-formaldehyde binder has been applied. Building insulation means bonded wool fiberglass insulation, having a loss on ignition of less than 8 percent and a density of less... charger systems, heat exchangers, melter cooling system, exhaust system, refractory brick work, fuel...

75 FR 59666 - Agricultural Swaps

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

..., grain sorghums, mill feeds, butter, eggs, Solanum tuberosum (Irish potatoes), wool, wool tops, fats and oils (including lard, tallow, cottonseed oil, peanut oil, soybean oil, and all other fats and oils... the Commodity Exchange Act (a) Permitting Eligible Swap Participants To Submit for Clearing and ICE...

Treating landfill gas hydrogen sulphide with mineral wool waste (MWW) and rod mill waste (RMW).

PubMed

Bergersen, Ove; Haarstad, Ketil

2014-01-01

Hydrogen sulphide (H2S) gas is a major odorant at municipal landfills. The gas can be generated from different waste fractions, for example demolition waste containing gypsum based plaster board. The removal of H2S from landfill gas was investigated by filtering it through mineral wool waste products. The flow of gas varied from 0.3 l/min to 3.0 l/min. The gas was typical for landfill gas with a mean H2S concentration of ca. 4500 ppm. The results show that the sulphide gas can effectively be removed by mineral wool waste products. The ratios of the estimated potential for sulphide precipitation were 19:1 for rod mill waste (RMW) and mineral wool waste (MWW). A filter consisting of a mixture of MWW and RMW, with a vertical perforated gas tube through the center of filter material and with a downward gas flow, removed 98% of the sulfide gas over a period of 80 days. A downward gas flow was more efficient in contacting the filter materials. Mineral wool waste products are effective in removing hydrogen sulphide from landfill gas given an adequate contact time and water content in the filter material. Based on the estimated sulphide removal potential of mineral wool and rod mill waste of 14 g/kg and 261 g/kg, and assuming an average sulphide gas concentration of 4500 ppm, the removal capacity in the filter materials has been estimated to last between 11 and 308 days. At the studied location the experimental gas flow was 100 times less than the actual gas flow. We believe that the system described here can be upscaled in order to treat this gas flow. Copyright © 2013 Elsevier Ltd. All rights reserved.

Respiratory health effects of man-made vitreous (mineral) fibres.

PubMed

De Vuyst, P; Dumortier, P; Swaen, G M; Pairon, J C; Brochard, P

1995-12-01

The group of man-made mineral or vitreous fibres (MMMFs or MMVFs) includes glass wool, rock wool, slag wool, glass filaments and microfibres, and refractory ceramic fibres (RCFs). Experimental observations have provided evidence that some types of MMVF are bioactive under certain conditions. The critical role of size parameters has been demonstrated in cellular and animal experiments, when intact fibres are in direct contact with the target cells. It is, however, difficult to extrapolate the results from these studies to humans since they bypass inhalation, deposition, clearance and translocation mechanisms. Inhalation studies are more realistic, but show differences between animal species regarding their sensibility to tumour induction by fibres. Fibre biopersistence is an important factor, as suggested by recent inhalation studies, which demonstrate positive results with RCF for fibrosis, lung tumours and mesothelioma. There is no firm evidence that exposure to glass-, rock- and slag wool is associated with lung fibrosis, pleural lesions, or nonspecific respiratory disease in humans. Exposure to RCF could enhance the effects of smoking in causing airways obstruction. An elevated standard mortality ratio for lung cancer has been demonstrated in cohorts of workers exposed to MMVF, especially in the early technological phase of mineral (rock slag) wool production. During that period, several carcinogenic agents (arsenic, asbestos, polycyclic aromatic hydrocarbons (PAH)) were also present at the workplace and quantitative data about smoking and fibre levels are lacking. It is not possible from these data to determine whether the risk of lung cancer is due to the MMVFs themselves. No increased risk of mesothelioma has been demonstrated in the cohorts of workers exposed to glass-, slag- or rock wool. There are in fact insufficient epidemiological data available concerning neoplastic diseases in RCF production workers because of the small size of the workforce and the relatively recent industrial production.

Amino acid sequences of peptides from a tryptic digest of a urea-soluble protein fraction (U.S.3) from oxidized wool

PubMed Central

Corfield, M. C.; Fletcher, J. C.; Robson, A.

1967-01-01

1. A tryptic digest of the protein fraction U.S.3 from oxidized wool has been separated into 32 peptide fractions by cation-exchange resin chromatography. 2. Most of these fractions have been resolved into their component peptides by a combination of the techniques of cation-exchange resin chromatography, paper chromatography and paper electrophoresis. 3. The amino acid compositions of 58 of the peptides in the digest present in the largest amounts have been determined. 4. The amino acid sequences of 38 of these have been completely elucidated and those of six others partially derived. 5. These findings indicate that the parent protein in wool from which the protein fraction U.S.3 is derived has a minimum molecular weight of 74000. 6. The structures of wool proteins are discussed in the light of the peptide sequences determined, and, in particular, of those sequences in fraction U.S.3 that could not be elucidated. PMID:16742497

µ-XRF Studies on the Colour Brilliance in Ancient Wool Carpets

PubMed Central

Meyer, Markus; Borca, Camelia N.; Huthwelker, Thomas; Bieber, Manfred; Meßlinger, Karl; Fink, Rainer H.

2017-01-01

Many handmade ancient and recent oriental wool carpets show outstanding brilliance and persistence of colour that is not achieved by common industrial dyeing procedures. Anthropologists have suggested the influence of wool fermentation prior to dyeing as key technique to achieve the high dyeing quality. By means of μ-XRF elemental mapping of mordant metals we corroborate this view and show a deep and homogenous penetration of colourants into fermented wool fibres. Furthermore we are able to apply this technique and prove that the fermentation process for ancient specimens cannot be investigated by standard methods due to the lack of intact cuticle layers. This finding suggests a broad range of further investigations that will contribute to a deeper understanding of the development of traditional dyeing techniques. Spectroscopic studies add information on the oxidation states of the metal ions within the respective mordant-dye-complexes and suggest a partial charge transfer as basis for a significant colour change when Fe mordants are used. PMID:29109824

The discrimination of colored acrylic, cotton, and wool textile fibers using micro-Raman spectroscopy. Part 1: in situ detection and characterization of dyes.

PubMed

Buzzini, Patrick; Massonnet, Genevieve

2013-11-01

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633-nm laser did not provide Raman information. The 514-nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830-nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength. © 2013 American Academy of Forensic Sciences.

Fiber glass exposure and human respiratory system cancer risk: lack of evidence persists since 2001 IARC re-evaluation.

PubMed

Marsh, Gary M; Buchanich, Jeanine M; Youk, Ada O

2011-06-01

To determine whether IARC's 2001 decision to downgrade the classification of insulation glass wool from Group 2B to Group 3 remains valid in light of epidemiological evidence reported after 2001. We performed a systematic review of epidemiological evidence regarding respiratory cancer risks in relation to man-made vitreous fiber (MMVF) exposure before and after the 2001 IARC re-evaluation with focus on glass wool exposure and respiratory system cancer. Since 2001, three new community-based, case-control studies, two detailed analyses of existing cohort studies and two reviews/meta-analyses were published. These studies revealed no consistent evidence of an increased respiratory system cancer risk in relation to glass wool exposure. From our evaluation of the epidemiological evidence published since 2001, we conclude that IARC's 2001 decision to downgrade insulation glass wool from Group 2B to Group 3 remains valid. Copyright © 2011 Elsevier Inc. All rights reserved.

Effects of crude glycerin supplementation on wool production, feeding behavior, and body condition of Merino ewes.

PubMed

Meale, S J; Chaves, A V; Ding, S; Bush, R D; McAllister, T A

2013-02-01

The increasing availability of crude glycerin from the biodiesel industry has led to an interest in its use as an energy source in ruminant diets. However, its effects on ruminal fermentation patterns and methane (CH4) production are unclear, and there are no reports on the effect of its inclusion in the diet on wool production or growth of Merino sheep. Thus, the objectives of this study were to determine the effects of increasing levels of crude glycerin on in vitro ruminal fermentation and CH4 production and DMI, BW, feeding behavior, and wool growth and quality in Merino ewes. Crude glycerin (99.2% pure, colorless, odorless, viscous liquid) replaced whole wheat grain in completely pelleted diets at levels of 0%, 6%, and 12% DM in both in vitro and in vivo studies. For in vitro studies, diets were dried and ground through a 1-mm screen and incubated on 2 different days for 24 h. Modified McDougal's buffer and rumen liquor were mixed 3:1, and gas production and CH4 concentration was measured after 6, 12, and 24 h of incubation with pH and IVDMD measured at 24 h. Cumulative gas (mL/g DM) and methane (mL) production was similar (P ≥ 0.35) among dietary treatments. In vitro dry matter disappearance (%) increased (P < 0.01) with increasing concentrations of crude glycerin. For the in vivo study, 39 Merino ewes were randomly assigned to 3 treatments (n = 13 ewes/treatment). Pelleted diets were available continuously for a 10-wk period through the use of automatic feeders. Ewes were weighed every 7 d. Wool yield was determined on mid-side patches of 100 cm(2) shorn at d 0 and d 70. Dye bands were used to determine wool growth and fiber length. Intake and ADG were similar among treatments (P = 0.59). Neither wool yield, length, spinning fineness, nor fiber diameter (μm) were affected after supplementation with crude glycerin (P ≥ 0.13). This study indicates the potential for crude glycerin to be included in the diets of Merino sheep at up to 12% DM without negatively affecting wool yield and quality.

Glass wool filters for concentrating waterborne viruses and agricultural zoonotic pathogens

USGS Publications Warehouse

Millen, Hana T.; Gonnering, Jordan C.; Berg, Ryan K.; Spencer, Susan K.; Jokela, William E.; Pearce, John M.; Borchardt, Jackson S.; Borchardt, Mark A.

2012-01-01

The key first step in evaluating pathogen levels in suspected contaminated water is concentration. Concentration methods tend to be specific for a particular pathogen group, for example US Environmental Protection Agency Method 1623 for Giardia and Cryptosporidium1, which means multiple methods are required if the sampling program is targeting more than one pathogen group. Another drawback of current methods is the equipment can be complicated and expensive, for example the VIRADEL method with the 1MDS cartridge filter for concentrating viruses2. In this article we describe how to construct glass wool filters for concentrating waterborne pathogens. After filter elution, the concentrate is amenable to a second concentration step, such as centrifugation, followed by pathogen detection and enumeration by cultural or molecular methods. The filters have several advantages. Construction is easy and the filters can be built to any size for meeting specific sampling requirements. The filter parts are inexpensive, making it possible to collect a large number of samples without severely impacting a project budget. Large sample volumes (100s to 1,000s L) can be concentrated depending on the rate of clogging from sample turbidity. The filters are highly portable and with minimal equipment, such as a pump and flow meter, they can be implemented in the field for sampling finished drinking water, surface water, groundwater, and agricultural runoff. Lastly, glass wool filtration is effective for concentrating a variety of pathogen types so only one method is necessary. Here we report on filter effectiveness in concentrating waterborne human enterovirus, Salmonella enterica, Cryptosporidium parvum, and avian influenza virus.

Glass Wool Filters for Concentrating Waterborne Viruses and Agricultural Zoonotic Pathogens

PubMed Central

Millen, Hana T.; Gonnering, Jordan C.; Berg, Ryan K.; Spencer, Susan K.; Jokela, William E.; Pearce, John M.; Borchardt, Jackson S.; Borchardt, Mark A.

2012-01-01

The key first step in evaluating pathogen levels in suspected contaminated water is concentration. Concentration methods tend to be specific for a particular pathogen group, for example US Environmental Protection Agency Method 1623 for Giardia and Cryptosporidium1, which means multiple methods are required if the sampling program is targeting more than one pathogen group. Another drawback of current methods is the equipment can be complicated and expensive, for example the VIRADEL method with the 1MDS cartridge filter for concentrating viruses2. In this article we describe how to construct glass wool filters for concentrating waterborne pathogens. After filter elution, the concentrate is amenable to a second concentration step, such as centrifugation, followed by pathogen detection and enumeration by cultural or molecular methods. The filters have several advantages. Construction is easy and the filters can be built to any size for meeting specific sampling requirements. The filter parts are inexpensive, making it possible to collect a large number of samples without severely impacting a project budget. Large sample volumes (100s to 1,000s L) can be concentrated depending on the rate of clogging from sample turbidity. The filters are highly portable and with minimal equipment, such as a pump and flow meter, they can be implemented in the field for sampling finished drinking water, surface water, groundwater, and agricultural runoff. Lastly, glass wool filtration is effective for concentrating a variety of pathogen types so only one method is necessary. Here we report on filter effectiveness in concentrating waterborne human enterovirus, Salmonella enterica, Cryptosporidium parvum, and avian influenza virus. PMID:22415031

19 CFR 151.61 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.61 Definitions. The... the merchandise which consists exclusively of wool or hair free of all vegetable and other foreign... or hair by extraction with alcohol, and having an ash content of not over 0.5 percent by weight...

19 CFR 151.61 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.61 Definitions. The... the merchandise which consists exclusively of wool or hair free of all vegetable and other foreign... or hair by extraction with alcohol, and having an ash content of not over 0.5 percent by weight...

19 CFR 151.61 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.61 Definitions. The... the merchandise which consists exclusively of wool or hair free of all vegetable and other foreign... or hair by extraction with alcohol, and having an ash content of not over 0.5 percent by weight...

19 CFR 151.61 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.61 Definitions. The... the merchandise which consists exclusively of wool or hair free of all vegetable and other foreign... or hair by extraction with alcohol, and having an ash content of not over 0.5 percent by weight...

19 CFR 151.61 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.61 Definitions. The... the merchandise which consists exclusively of wool or hair free of all vegetable and other foreign... or hair by extraction with alcohol, and having an ash content of not over 0.5 percent by weight...

Expanding the utility of the Agricultural Research Service (ARS) process bleaching

USDA-ARS?s Scientific Manuscript database

The ARS Process for bleaching, biopolishing, and shrinkproofing wool is a novel alternative to chlorination and conventional bleaching. Consumer acceptance of domestic machine-washable, comfortable wool which can be worn next to the skin will lead to niche-market- potential and competitive, increas...

78 FR 72057 - Rules and Regulations Under the Wool Products Labeling Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... FEDERAL TRADE COMMISSION 16 CFR Part 300 Rules and Regulations Under the Wool Products Labeling Act AGENCY: Federal Trade Commission (``FTC'' or ``Commission''). ACTION: Extension of the deadline..., mail or deliver your comment to the following address: Federal Trade Commission, Office of the...

Quantitative determination of wool in textile by near-infrared spectroscopy and multivariate models.

PubMed

Chen, Hui; Tan, Chao; Lin, Zan

2018-08-05

The wool content in textiles is a key quality index and the corresponding quantitative analysis takes an important position due to common adulterations in both raw and finished textiles. Conventional methods are maybe complicated, destructive, time-consuming, environment-unfriendly. Developing a quick, easy-to-use and green alternative method is interesting. The work focuses on exploring the feasibility of combining near-infrared (NIR) spectroscopy and several partial least squares (PLS)-based algorithms and elastic component regression (ECR) algorithms for measuring wool content in textile. A total of 108 cloth samples with wool content ranging from 0% to 100% (w/w) were collected and all the compositions are really existent in the market. The dataset was divided equally into the training and test sets for developing and validating calibration models. When using local PLS, the original spectrum axis was split into 20 sub-intervals. No obvious difference of performance can be seen for the local PLS models. The ECR model is comparable or superior to the other models due its flexibility, i.e., being transition state from PCR to PLS. It seems that ECR combined with NIR technique may be a potential method for determining wool content in textile products. In addition, it might have regulatory advantages to avoid time-consuming and environmental-unfriendly chemical analysis. Copyright © 2018 Elsevier B.V. All rights reserved.

In-situ sonosynthesis of nano N-doped ZnO on wool producing fabric with photo and bio activities, cell viability and enhanced mechanical properties.

PubMed

Behzadnia, Amir; Montazer, Majid; Rad, Mahnaz Mahmoudi

2015-08-01

Here, a simple processing route is introduced for preparation of N-doped nano structure ZnO at 75-80°C using in-situ sonosynthesis method through hydrolysis of zinc acetate at pH≈9-10 adjusting with ammonia. Synthesis and fabrication of nano N-doped ZnO were carried out on the wool fabric through impregnation of the fabric in ultrasound bath using different concentrations of zinc acetate followed by curing. The antibacterial and antifungal activities of the treated fabrics were assessed against two common pathogenic bacteria including Escherichia coli, Staphylococcus aureus and the diploid fungus namely Candida albicans. The photo-catalytic activity of nano N-doped ZnO particles on the wool fabric was determined by degradation of Methylene Blue under daylight irradiation. Increasing zinc acetate and prolonged sonication time led to higher photo-catalytic activity as more dye stain degraded from the stained treated fabric under daylight. Higher photo-catalytic activity was observed on the nano N-doped ZnO sonotreated wool fabric having more hydrophilicity. Finally, the treatment indicated no negative effect on the fabric safety while reduced alkaline solubility and yellowness even enhanced the fabric tensile strength. The response surface methodology was also utilized to optimize the wool fabric treatment conditions. Copyright © 2015 Elsevier B.V. All rights reserved.

Case Report: Analytical Electron Microscopy of Lung Granulomas Associated with Exposure to Coating Materials Carried by Glass Wool Fibers

PubMed Central

Ferreira, Angela S.; Moreira, Valéria B.; Castro, Marcos César S.; Soares, Porfírio J.; Algranti, Eduardo; Andrade, Leonardo R.

2010-01-01

Context Man-made vitreous fibers (MMVFs) are noncrystalline inorganic fibrous material used for thermal and acoustical insulation (e.g., rock wool, glass wool, glass microfibers, and refractory ceramic fibers). Neither epidemiologic studies of human exposure nor animal studies have shown a noticeable hazardous effect of glass wools on health. However, MMVFs have been anecdotally associated with granulomatous lung disease in several case reports. Case presentation Here, we describe the case of a patient with multiple bilateral nodular opacities who was exposed to glass wool fibers and coating materials for 7 years. Bronchoalveolar lavage fluid revealed an increased total cell count (predominantly macrophages) with numerous cytoplasmic particles. Lung biopsy showed peribronchiolar infiltration of lymphoid cells and many foreign-body–type granulomas. Alveolar macrophages had numerous round and elongated platelike particles inside the cytoplasm. X-ray microanalysis of these particles detected mainly oxygen/aluminum/silicon and oxygen/magnesium/silicon, compatible with kaolinite and talc, respectively. No elemental evidence for glass fibers was found in lung biopsy. Discussion The contribution of analytical electron microscopy applied in the lung biopsy was imperative to confirm the diagnosis of pneumoconiosis associated with a complex occupational exposure that included both MMVFs and coating materials. Relevance to clinical or professional practice This case study points out the possible participation of other components (coating materials), beyond MMVFs, in the etiology of pneumoconiosis. PMID:20123612

16 CFR 1.24 - Rules applicable to wool, fur, and textile fiber products and rules promulgated under the Fair...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Labeling Act. Rules having the force and effect of law are authorized under section 6 of the Wool Products... Identification Act, and sections 4, 5, and 6 of the Fair Packaging and Labeling Act. [40 FR 15233, Apr. 4, 1975] ...

Project Summary Report : Evaluation of Effectiveness and Cost-Benefits of Woolen Roadside Reclamation Products

DOT National Transportation Integrated Search

2017-12-01

Wool has been used by humans for millennia for clothing, blankets, and even for housing like the yurts of central Asia. This project took a fresh look at wool and explored its potential for incorporation in erosion control blankets (ECBs) and to incr...

ANTHRAX PROBLEM IN MASSACHUSETTS

PubMed Central

Osborn, Stanley H.

1920-01-01

Federal regulations do not prevent importation of anthrax infected material. This author suggests anthrax surveys in countries of origin of materials, quarantine of all hides, wool and hair from suspected areas, disinfection of these at places of origin and sanitary care here of wastes from hide and wool industrial establishments. Imagesp665-a PMID:18010353

78 FR 5775 - Notice of Allocation of Tariff Rate Quotas (TRQ) on the Import of Certain Worsted Wool Fabrics...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... DEPARTMENT OF COMMERCE International Trade Administration Notice of Allocation of Tariff Rate... Trade Administration, Department of Commerce. ACTION: Notice of allocation of 2013 worsted wool fabric tariff rate quota. SUMMARY: The Department of Commerce (Department) has determined the allocation for...

Evaluating Fire Doors with Hose Ports.

DTIC Science & Technology

1987-06-01

cm) of approved mineral wool structural insulation was applied to the fire side of the steel bulkhead. Steel pins were welded to the bulkhead and the...steel bulkheads, by continuously welding the frame Cl]nce to the bulkhead, USCG approved mineral wool structural insulation was applied on one side of

Safety Characteristics of Lithium Primary and Secondary Battery Systems. Formulation of a Lithium Battery Safety Matrix

DTIC Science & Technology

1986-07-01

bags. 3) Cushioning of mineral wool , vermiculite or equivalent. Required labeling FLAMMABLE SOLID FLAMMABLE SOLID and DANGEROUS WHEN WET Authorized modes...or equivalent material such as mineral wool . Only permitted, hazardous waste transport companies may carry lithium batteries for disposal. The

Groundwater sampling methods using glass wool filtration to trace human enteric viruses in Madison, Wisconsin

USDA-ARS?s Scientific Manuscript database

Human enteric viruses have been detected in the Madison, Wisconsin deep municipal well system. Earlier projects by the Wisconsin Geological and Natural History Survey (WGNHS) have used glass wool filters to sample groundwater for these viruses directly from the deep municipal wells. Polymerase chain...

Simultaneous concentration of bovine viruses and agricultural zoonotic bacteria from water using sodocalcic glass wool filters

USDA-ARS?s Scientific Manuscript database

Infiltration and runoff from manured agricultural fields can result in livestock pathogens reaching groundwater and surface waters. Here, we measured the effectiveness of glass wool filters to simultaneously concentrate enteric viruses and bacteria of bovine origin from water. The recovery efficienc...

76 FR 6095 - Commodity Options and Agricultural Swaps

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

..., Solanum tuberosum (Irish potatoes), wool, wool tops, fats and oils (including lard, tallow, cottonseed oil, peanut oil, soybean oil, and all other fats and oils), cottonseed meal, cottonseed, peanuts, soybeans... Participants To Submit for Clearing and ICE Clear U.S., Inc. and Futures Commission Merchants To Clear Certain...

19 CFR 151.73 - Importer's request for commercial laboratory test.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Hair § 151.73 Importer's request for commercial laboratory test. (a) Conditions for commercial test. If... request that a commercial test be made to determine the percentage clean yield of the wool or hair. (b... the wool or hair in dispute to be selected and tested by a commercial method approved by the...

19 CFR 151.73 - Importer's request for commercial laboratory test.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Hair § 151.73 Importer's request for commercial laboratory test. (a) Conditions for commercial test. If... request that a commercial test be made to determine the percentage clean yield of the wool or hair. (b... the wool or hair in dispute to be selected and tested by a commercial method approved by the...

19 CFR 151.73 - Importer's request for commercial laboratory test.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Hair § 151.73 Importer's request for commercial laboratory test. (a) Conditions for commercial test. If... request that a commercial test be made to determine the percentage clean yield of the wool or hair. (b... the wool or hair in dispute to be selected and tested by a commercial method approved by the...

19 CFR 151.73 - Importer's request for commercial laboratory test.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Hair § 151.73 Importer's request for commercial laboratory test. (a) Conditions for commercial test. If... request that a commercial test be made to determine the percentage clean yield of the wool or hair. (b... the wool or hair in dispute to be selected and tested by a commercial method approved by the...

19 CFR 151.73 - Importer's request for commercial laboratory test.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Hair § 151.73 Importer's request for commercial laboratory test. (a) Conditions for commercial test. If... request that a commercial test be made to determine the percentage clean yield of the wool or hair. (b... the wool or hair in dispute to be selected and tested by a commercial method approved by the...

CONTROL ROD

DOEpatents

Walker, D.E.; Matras, S.

1963-04-30

This patent shows a method of making a fuel or control rod for a nuclear reactor. Fuel or control material is placed within a tube and plugs of porous metal wool are inserted at both ends. The metal wool is then compacted and the tube compressed around it as by swaging, thereby making the plugs liquid- impervious but gas-pervious. (AEC)

16 CFR 300.16 - Ornamentation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Ornamentation. 300.16 Section 300.16... REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300.16 Ornamentation. (a) Where the wool... § 300.23 of this part (Rule 23). [29 FR 6625, May 21, 1964, as amended at 45 FR 44261, July 1, 1980] ...

Investigating the microstructure of keratin extracted from wool: peptide sequence (MALDI-TOF/TOF) and protein conformation (FTIR)

USDA-ARS?s Scientific Manuscript database

Keratin was extracted from wool by reduction with 2-mercaptoethanol. It was isolated as intact keratin and characterized by its similar molecular weight, protein composition, and secondary structure to native keratin. Gel electrophoresis patterns and MALDI-TOF/TOF peptide sequences provided the ide...

75 FR 24945 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Emission Standards for Hazardous Air Pollutants (NESHAP) for Mineral Wool Production (40 CFR part 63... wool production plants are required to install fabric filter bag leak detection systems and then... Air Act. The required information consists of emissions data and other information that have been...

Alkaline earth silicate wools - A new generation of high temperature insulation.

PubMed

Brown, Robert C; Harrison, Paul T C

2012-11-01

Intensive study of the natural asbestiform minerals that cause human diseases, and the consequent understanding of their hazardous characteristics, has enabled the development of manufactured fibres whose physical and/or chemical properties, in particular as they relate to biopersistence, have been adjusted to minimize possible harm to health. A strong driver for the developmentof new high temperature insulation materials wasthe perception of the toxicity of refractory ceramic fibres (RCF)and their classification in the EU as a category 2 carcinogen under Directive 67/548/EEC. Such classification carries with it the requirement for substitution by less hazardous materials. This paper focuses on the development of alkaline earth silicate (AES) wools as a new class of high temperature insulation with the capability of such substitution in a number of applications. These wools have only a low potential to cause harm because they do not persist in lung tissue once deposited, and have produced minimal effects in experimental test systems. AES wools are increasingly being used in a wide range of high temperature applications. Copyright © 2012 Elsevier Inc. All rights reserved.

Investigation of the usage of centrifuging waste of mineral wool melt (CMWW), contaminated with phenol and formaldehyde, in manufacturing of ceramic products.

PubMed

Kizinievič, Olga; Balkevičius, Valdas; Pranckevičienė, Jolanta; Kizinievič, Viktor

2014-08-01

Large amounts of centrifuging waste of mineral wool melt (CMWW) are created during the production of mineral wool. CMWW is technogenic aluminum silicate raw material, formed from the particles of undefibred melt (60-70%) and mineral wool fibers (30-40%). 0.3-0.6% of organic binder with phenol and formaldehyde in its composition exists in this material. Objective of the research is to investigate the possibility to use CMWW as an additive for the production of ceramic products, by neutralising phenol and formaldehyde existing in CMWW. Formation masses were prepared by incorporating 10%, 20% and 30% of CMWW additive and burned at various temperatures. It was identified that the amount of 10-30% of CMWW additive influences the following physical and mechanical properties of the ceramic body: lowers drying and firing shrinkage, density, increases compressive strength and water absorption. Investigations carried out show that CMWW waste can be used for the production of ceramic products of various purposes. Copyright © 2014 Elsevier Ltd. All rights reserved.

The proteome of the wool cuticle.

PubMed

Koehn, Henning; Clerens, Stefan; Deb-Choudhury, Santanu; Morton, James D; Dyer, Jolon M; Plowman, Jeffrey E

2010-06-04

The cuticle is responsible for important wool fiber characteristics such as handle and abrasion resistance, which impact on the fiber's performance in both interior and apparel textiles. The cuticle proteome, however, is not well understood due to the difficulty in isolating pure wool cuticle and its significant resistance to protein extraction, which is attributed to the presence of extensive disulfide and isopeptide cross-linking. We investigated the proteome of highly pure Merino wool cuticle using a combined strategy of chemical and enzymatic digestion and identified 108 proteins, including proteins responsible for a variety of cellular processes. The majority of identified proteins belonged to keratin and nonkeratin protein families known to play an important role in molecular assembly and cellular structure. Keratin-associated, intermediate filament and cytoskeletal keratin proteins were identified as the most prominent keratinous cuticular constituents, while histones, tubulins, and desmosomes were the key nonkeratin structural proteins. We conclude that a variety of proteins contribute to cuticle structure and fiber characteristics, and that the keratinous protein families of IFPs and KAPs represent the most important cuticular constituents.

JPRS Report, West Europe.

DTIC Science & Technology

1987-06-16

unholy government? A govern- ment program was put on paper in a couple days with dyed-in-the-wool members of the bourgeoisie , but the party’s own...And it is not necessary for the Conservative Party to ruffle the fea- thers of the bourgeoisie at every turn. It is bourgeois even otherwise and...tough ideological questions were not asked before when it was necessary to cooperate with the bourgeoisie — why are they being asked now? Now that

Verification and Evaluation of Aquatic Contaminant Simulation Module (CSM)

DTIC Science & Technology

2016-08-01

RECOVERY model (Boyer et al. 1994, Ruiz et al. 2000) and Water- quality Analysis Simulation Program (WASP) model (Wool et al. 2006). This technical note (TN...bacteria, and detritus). Natural waters can contain a mixture of solid particles ranging from gravel (2 mm to 20 mm) or sand (0.07 mm to 2 mm) down to... quality perspective, cohesive sediments are usually of greater importance in water quality modeling. The chemical species in the active sediment

Impact of exposure to insulation wool on lung function and cough in Swedish construction workers

PubMed Central

Albin, M.; Engholm, G.; Hallin, N.; Hagmar, L.

1998-01-01

OBJECTIVES: To investigate whether application of insulation wool adversely affects lung volumes and increases the occurrence of symptoms of airway irritation. METHODS: Data from nationwide health check ups in 1981-93 of male construction workers born in 1955 or later were used to investigate cross sectional (n = 96,004) and longitudinal (n = 26,298) associations between lung volumes, vital capacity (VC), and forced expiratory volume in one second (FEV1) and exposure to insulation wool by combining a job exposure matrix (JEM) and self reported exposure. Data on 12 month prevalence of persistent cough not associated with the common cold was available for the period 1989-92. Potential confounding from smoking, exposure to asbestos, silica, and isocyanates, was considered in the analyses. RESULTS: For those in the highest exposure category (self reported duration of exposure of > or = 11 years, and high exposure according to the JEM) VC was on average 2.5 cl lower (95% CI -6.5 to 1.5) than in those with no exposure. The corresponding figures for FEV1 was -2.4 cl (95% CI -6.1 to 1.3). In the longitudinal analyses, the yearly change in VC between the first and last spirometry for those in the highest exposure category was 0.50 cl (95% CI -0.97 to 1.98) less than in the unexposed category. The corresponding figure for FEV1 was 0.89 cl (95% CI - 0.70 to 2.06). High exposure to insulation wool, asbestos, or silica, during the 12 months preceding the check up was associated with increased odds ratios (ORs) for persistent cough of the same magnitude as current smoking. CONCLUSIONS: The results indicate no effects on VC or FEV1 from exposure to insulation wool. Recent exposure to insulation wool, asbestos, and silica was associated with an increased prevalence of persistent cough.   PMID:9930086

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

PubMed Central

Vu, Trang; Xue, Ye; Vuong, Trinh; Erbe, Matthew; Bennet, Christopher; Palazzo, Ben; Popielski, Lucas; Rodriguez, Nelson; Hu, Xiao

2016-01-01

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples’ characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems. PMID:27618011

Genetic factors controlling wool shedding in a composite Easycare sheep flock.

PubMed

Matika, O; Bishop, S C; Pong-Wong, R; Riggio, V; Headon, D J

2013-12-01

Historically, sheep have been selectively bred for desirable traits including wool characteristics. However, recent moves towards extensive farming and reduced farm labour have seen a renewed interest in Easycare breeds. The aim of this study was to quantify the underlying genetic architecture of wool shedding in an Easycare flock. Wool shedding scores were collected from 565 pedigreed commercial Easycare sheep from 2002 to 2010. The wool scoring system was based on a 10-point (0-9) scale, with score 0 for animals retaining full fleece and 9 for those completely shedding. DNA was sampled from 200 animals of which 48 with extreme phenotypes were genotyped using a 50-k SNP chip. Three genetic analyses were performed: heritability analysis, complex segregation analysis to test for a major gene hypothesis and a genome-wide association study to map regions in the genome affecting the trait. Phenotypes were treated as a continuous or binary variable and categories. High estimates of heritability (0.80 when treated as a continuous, 0.65-0.75 as binary and 0.75 as categories) for shedding were obtained from linear mixed model analyses. Complex segregation analysis gave similar estimates (0.80 ± 0.06) to those above with additional evidence for a major gene with dominance effects. Mixed model association analyses identified four significant (P < 0.05) SNPs. Further analyses of these four SNPs in all 200 animals revealed that one of the SNPs displayed dominance effects similar to those obtained from the complex segregation analyses. In summary, we found strong genetic control for wool shedding, demonstrated the possibility of a single putative dominant gene controlling this trait and identified four SNPs that may be in partial linkage disequilibrium with gene(s) controlling shedding. © 2013 University of Edinburgh, Animal Genetics © 2013 Stichting International Foundation for Animal Genetics.

9 CFR 95.7 - Wool, hair, and bristles; requirements for unrestricted entry.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Wool, hair, and bristles; requirements for unrestricted entry. 95.7 Section 95.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS SANITARY CONTROL OF ANIMAL...

9 CFR 95.8 - Wool, hair, and bristles; importations permitted subject to restrictions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Wool, hair, and bristles; importations permitted subject to restrictions. 95.8 Section 95.8 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS SANITARY CONTROL O...

77 FR 4498 - Rules and Regulations Under the Wool Products Labeling Act of 1939

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Commission requests public comment on the overall costs, benefits, necessity, and regulatory and economic... seeking public comment on the continuing need for the rule or guide as well as its costs and benefits to..., and on the costs and benefits of certain provisions of the Wool Products Labeling Act of 1939. DATES...

19 CFR 151.68 - Merchandise to be sampled and tested by Customs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Hair § 151.68 Merchandise to be sampled and tested by Customs. The following shall be weighed, sampled... wool or hair subject to duty at a rate per clean kilogram, except importations entered directly for... imported wool or hair manipulated under the provisions of section 562, Tariff Act of 1930, as amended (19 U...

19 CFR 151.68 - Merchandise to be sampled and tested by Customs.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Hair § 151.68 Merchandise to be sampled and tested by Customs. The following shall be weighed, sampled... wool or hair subject to duty at a rate per clean kilogram, except importations entered directly for... imported wool or hair manipulated under the provisions of section 562, Tariff Act of 1930, as amended (19 U...

19 CFR 151.68 - Merchandise to be sampled and tested by Customs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Hair § 151.68 Merchandise to be sampled and tested by Customs. The following shall be weighed, sampled... wool or hair subject to duty at a rate per clean kilogram, except importations entered directly for... imported wool or hair manipulated under the provisions of section 562, Tariff Act of 1930, as amended (19 U...

19 CFR 151.68 - Merchandise to be sampled and tested by Customs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Hair § 151.68 Merchandise to be sampled and tested by Customs. The following shall be weighed, sampled... wool or hair subject to duty at a rate per clean kilogram, except importations entered directly for... imported wool or hair manipulated under the provisions of section 562, Tariff Act of 1930, as amended (19 U...

19 CFR 151.68 - Merchandise to be sampled and tested by Customs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Hair § 151.68 Merchandise to be sampled and tested by Customs. The following shall be weighed, sampled... wool or hair subject to duty at a rate per clean kilogram, except importations entered directly for... imported wool or hair manipulated under the provisions of section 562, Tariff Act of 1930, as amended (19 U...

Mike's Guiding Warmth

ERIC Educational Resources Information Center

Leckie, Linda

2010-01-01

Mike Elrick knew how to stay warm. He loved to wrap himself from head to toe in wool; the author pictures Mike as a wool-clad moccasin-footed snow walker twisting into lampwick harnesses with his trail axe looped through his belt. Mike looked forward to winter and welcomed a drop in the mercury--the lower the better! He loved the physical work of…

Comparative Recovery of Two Human Norovirus Surrogates, Feline Calicivirus and Murine Norovirus, with a Wet Vacuum System, Macrofoam-Tipped Swab, and Bottle Extraction Method from Carpets.

PubMed

Buckley, David; Fraser, Angela; Pettigrew, Charles; Anderson, Jeffery; Jiang, Xiuping

2018-05-10

Human noroviruses (HuNoV) are the leading cause of known foodborne illness in the United States, but direct detection during outbreak investigations is challenging. On the other hand, sampling both hard and soft environmental surfaces can be used to improve outbreak investigations. Currently, we lack virus recovery methods for soft surfaces, such as carpet, despite evidence suggesting that carpets contribute to HuNoV outbreaks. Our aim was to compare two recovery methods, wet vacuum and swabbing, for routine carpet sampling of HuNoV against a laboratory reference method known as bottle extraction (BE). Specifically, we compared the microbial vacuum (MVAC), macrofoam-tipped swab (MS), and BE by using HuNoV surrogates, feline calicivirus (FCV) and murine norovirus (MNV), inoculated on wool and nylon carpet carriers. The highest recovery of infectious FCV from wool was 5.51, 3.76, and 5.16 log PFU, whereas on nylon, recovery was 5.03, 3.62, and 4.75 log PFU by using BE, MS, and MVAC, respectively. On the other hand, the highest recovery of infectious MNV from wool was 6.10, 4.50, and 5.99 log PFU, while recovery on nylon was 6.07, 4.58, and 6.13 log PFU by using BE, MS, and MVAC, respectively. Significantly more PFU and genomic copies were recovered by using BE and MVAC compared with MS, while buffer type played a significant role in recovery of infectious FCV.

77 FR 64437 - Airworthiness Directives; Burkhart GROB Luft-und Raumfahrt GmbH Sailplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-22

... can remove with metal wool and that has no visible pitting in the base metal. If you cannot remove the corrosion with metal wool or if there is visible pitting in the base metal, we define it as heavy corrosion. (3) If any cracks or heavy corrosion are found during any of the inspections required in paragraph (f...

78 FR 1726 - Airworthiness Directives; Burkhart GROB Luft- und Raumfahrt GmbH Sailplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... purposes of this AD, we define slight corrosion as corrosion you can remove with metal wool and that has no visible pitting in the base metal. If you cannot remove the corrosion with metal wool or if there is visible pitting in the base metal, we define it as heavy corrosion. (3) If any cracks or heavy corrosion...

Nuclear Plant Siting Study. Volume 2

DTIC Science & Technology

1976-06-01

210 feet apart with sliding type supports every 35 feet. See Figure 3-6 for support details. A double wrapping of mineral wool insulation with...3,000 Mhr 11.80 35,400 (M 3,500 12", XS, .375 Wall - Conduit 20" (M 1,000 LF 105 105,000 (L 3,700 Mhr 11.80 43,700 (M 4,300 Insulation Mineral Wool 3

Commandant’s International Technical Series. Volume 8. Fire Aboard the M.S. SCANDINAVIAN SEA on March 9, 1984. Technical Assessment

DTIC Science & Technology

1985-01-01

Bulkheads - 5/8" asbestos cement panels Ceilings - 3/8" asbestos cement panels Structural insulation - mineral wool Ducting and Hull Insulation-fibrous...glass/ mineral wool D6ryks - steel Linings - 3/4" and 5/8" asbestos cement panels Interior finish - melamine plastic laminate Furnishings - wood and

76 FR 72769 - National Emissions Standards for Hazardous Air Pollutants: Mineral Wool Production and Wool...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

...-2010-1041 and EPA-HQ-OAR-2010-1042, by one of the following methods: http://www.regulations.gov... units: a cupola furnace for melting the mineral charge; a blow chamber in which air and, in some cases... addition to one complete version of the comment that includes information claimed as CBI, a copy of the...

9 CFR 95.14 - Blood meal, tankage, meat meal, and similar products, for use as fertilizer or animal feed...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Blood meal, tankage, meat meal, and..., tankage, meat meal, and similar products, for use as fertilizer or animal feed; requirements for entry. Dried blood or blood meal, lungs or other organs, tankage, meat meal, wool waste, wool manure, and...

Simulation of past exposure in slag wool production.

PubMed

Fallentin, B; Kamstrup, O

1993-08-01

A survey of the working conditions at a Danish slag wool production factory during the early technological phase in the 1940s is presented. No exposure data, however, are available for that period. So, a full-scale simulation of the past production of slag wool has been performed. Air monitoring was carried out in the working area around the cupola furnace. The aim was to measure exposure to air pollutants other than fibres. Such exposure might have confounded a possible association between lung cancer and exposure to fibres, in the early technological phase of slag wool production. The simulation experiment demonstrated exposure to PAH, a known lung carcinogen. The effect of other concurrent exposures is difficult to assess. Time-weighted average concentrations of particulate material ranged between 12.9 and 49.1 mg m-3 at the upper decks around the cupola. Corresponding concentrations of the dominant metals zinc and lead were 4.4-22.7 mg Zn m-3 and 0.9-4.7 mg Pb m-3. Significant concentrations of PAH up to 269 micrograms PAH m-3 (4 micrograms BaP m-3) occurred during ignition of the cupola furnace. The carbon monoxide level reached 270 ppm also during ignition.

The use of a behavioral response system in the USF/NASA toxicity screening test method

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.; Packham, S. C.

1977-01-01

Relative toxicity data on the pyrolysis effluents from bisphenol A polycarbonate and wool fabric were obtained, based on visual observations of the behavior of free-moving mice and on an avoidance response behavioral paradigm of restrained rats monitored by an instrumented behavioral system. The initial experiments show an essentially 1:1 correlation between the two systems with regard to first signs of incapacitation, collapse, and death from pyrolysis effluents from polycarbonate. It is hypothesized that similarly good correlations between these two systems might exist for other materials exhibiting predominantly carbon monoxide mechanisms of intoxication. This hypothesis needs to be confirmed, however, by additional experiments. Data with wool fabric exhibited greater variability with both procedures, indicating possibly different mechanisms of intoxication for wool as compared with bisphenol A polycarbonate.

Lung Biopersistence and in Vitro Dissolution Rate Predict the Pathogenic Potential of Synthetic Vitreous Fibers.

PubMed

Hesterberg, T W; Hart, G A

2000-01-01

Here we review the past decade of research on inorganic fiber toxicology, which demonstrates that fiber biopersistence and in vitro dissolution rate correlate well with fiber pathogenicity. Test fibers for these studies included eight synthetic vitreous fibers (SVFs)-refractory ceramic fiber (RCF1), four fiber glasses (FCs), rock wool, slag wool, HT stone wool-and two asbestos types (crocidolite and amosite). Fiber toxicology and biopersistence were investigated using rodents exposed by inhalation. To evaluate chronic inhalation toxicity, rodents were exposed nose-only to ∼ 100 fibers >20 µm in length (F > 20 µm)/cm(3), 6 h/day, 5 days/wk, for 2 yr (rats) or 1½ yr (hamsters). To evaluate lung biopersistence, rats were exposed nose-only for 5 days to fiber aerosol; lung burdens were then analyzed during 1 yr postexposure. In vitro dissolution rate was evaluated in a flow-through system using physiological solutions that mimic the inorganic components of extra- and intracellular lung fluids. The 10 test fibers encompassed a range of respiratory toxicities, from transient inflammation only to carcinogenesis. Lung clearance weighted half-times (WT½) for F > 20 µm were 6-15 days for stonewool, building insulation FCs, and slag wool; 50-80 days for rock wool, 2 special-application FCs, and RCFI; and >400 days for asbestos. WT½ correlated with pathogenicity: The rapidly clearing fibers were innocuous (insulation FCs, slag wool, and stonewool), but the more biopersistent fibers were fibrogenic (rock wool) or fibrogenic and carcinogenic (special-application FCs, RCFI, amosite and crocidolite asbestos). In vitro dissolution rates (k dis= ng/cm(2)/h) of the 10 fibers at pH 7.4 or 4.5 ranged from < 1 to >600. Fibers that dissolved rapidly in vitro also cleared quickly from the lung and induced only transient inflammation in the chronic studies. In contrast, fibers that dissolved slowly in vitro were biopersistent in the lung and tended to induce permanent pathogenicity. Other in vitro studies of fiber degradation suggest that, in addition to fiber dissolution, fiber leaching and subsequent transverse breakage may also be important mechanisms in lung biopersistence and hence pathogenicity. The validity of using lung biopersistence for predicting the potential pathogenicity of SVFs is confirmed by this research. The research also supports the use of in vitro fiber degradation at pH 7.4 and/or pH 4.5 as an indicator of SVF potential pathogenicity.

9 CFR 95.14 - Blood meal, tankage, meat meal, and similar products, for use as fertilizer or animal feed...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Blood meal, tankage, meat meal, and... BYPRODUCTS (EXCEPT CASINGS), AND HAY AND STRAW, OFFERED FOR ENTRY INTO THE UNITED STATES § 95.14 Blood meal.... Dried blood or blood meal, lungs or other organs, tankage, meat meal, wool waste, wool manure, and...

9 CFR 95.14 - Blood meal, tankage, meat meal, and similar products, for use as fertilizer or animal feed...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Blood meal, tankage, meat meal, and... BYPRODUCTS (EXCEPT CASINGS), AND HAY AND STRAW, OFFERED FOR ENTRY INTO THE UNITED STATES § 95.14 Blood meal.... Dried blood or blood meal, lungs or other organs, tankage, meat meal, wool waste, wool manure, and...

9 CFR 95.14 - Blood meal, tankage, meat meal, and similar products, for use as fertilizer or animal feed...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Blood meal, tankage, meat meal, and... BYPRODUCTS (EXCEPT CASINGS), AND HAY AND STRAW, OFFERED FOR ENTRY INTO THE UNITED STATES § 95.14 Blood meal.... Dried blood or blood meal, lungs or other organs, tankage, meat meal, wool waste, wool manure, and...

Fire Hazard Assessment of Shipboard Plastic Waste Processing Systems

DTIC Science & Technology

1994-02-28

cm 1.6 Wood panel (S178M) 1.6 Plastic wage (processed) 1.65 Hardboard, gloss paint, 3.4 mm 1.7 Mineral wool , textile paper (S160M) 1.7 Hardboard...1.27 cm 390 Chipboard (Si 18M) 390 Plywood, plain, 0.635 cm 390 Foam, flexible, 2.54 cm 390 GRP, 2.24 mm 390 Pha waste -(ressed 400 Mineral wool , textile

Dose-response of supplementing marine algae (Schizochytrium spp.) on production performance, fatty acid profiles, and wool parameters of growing lambs.

PubMed

Meale, S J; Chaves, A V; He, M L; McAllister, T A

2014-05-01

Microalgae are the original source of docosahexaenoic acid (DHA; 22:6n-3) in the marine food chain, and its inclusion in animal feeds has been considered as a means of increasing the DHA level in foods of animal origin. As such, this study aimed to investigate the effects of supplementing an algal meal, high in DHA derived from Schizochytrium spp. (DHA-G), in the diet of Canadian Arcott lambs, on growth, carcass characteristics, wool production, and fatty acid (FA) profiles of subcutaneous adipose tissues (SAT), perirenal adipose tissues (PAT), and skirt muscle (SM). Forty-four lambs were randomly assigned to dietary treatments. Diets consisted of a pelleted, barley-based finishing diet with DHA-G supplemented at 0, 1, 2, or 3% DM as a replacement for flax oil and barley grain. Feed deliveries and orts were recorded daily. Lambs were weighed weekly and slaughtered once they reached ≥ 45 kg live weight. Carcass characteristics, ruminal pH, and liver weights were determined at slaughter. Wool yield was determined on mid-side patches of 100 cm(2) shorn at d 0 and on the day before slaughter (d 105 or 140). Dye bands were used to determine wool growth, fiber diameter, and staple length. Adipose tissues and SM samples were taken at slaughter and analyzed for FA profiles. Data were analyzed using mixed procedure in SAS with orthogonal contrasts testing for linear, quadratic, or cubic responses to increasing levels of DHA-G. Daily DMI, ADG, and G:F were similar as were wool quality and yield (P > 0.05). Carcass characteristics were generally unaffected (P > 0.05), except for body wall thickness (mm), which showed a quadratic response (P = 0.01) with increasing DHA-G. The concentration of eicosapentaenoic acid (EPA; 20:5n-6; mg/100 g fresh tissue) linearly increased (P < 0.001) with DHA-G in both adipose tissues and responded quadratically in SM (P = 0.05). Similarly, DHA (mg/100 g fresh tissue) increased linearly (P < 0.01) with DHA-G in all tissue types (P < 0.001). Supplementing DHA-G decreased (P < 0.001) the n-6:n-3 ratio in all tissues. No effects (P ≥ 0.05) on PUFA or SFA were observed across the 3 tissues, with no response (P ≥ 0.10) in the SFA:PUFA ratio in either SM or SAT; however, the SFA:PUFA ratio linearly decreased in PAT (P = 0.01) as DHA-G increased. These results indicate that DHA-G can be successfully included in the diets of growing lambs, up to 3% DM, with the potential to improve carcass characteristics and the FA profile of adipose tissue and muscle.

Stable isotopes to discriminate lambs fed herbage or concentrate both obtained from C(3) plants.

PubMed

Moreno-Rojas, Jose M; Vasta, Valentina; Lanza, Alfio; Luciano, Giuseppe; Ladroue, Virginie; Guillou, Claude; Priolo, Alessandro

2008-12-01

This study was aimed at determining whether isotopic ratio mass spectrometry (IRMS) enables us to discriminate between lambs fed herbage or concentrate, both obtained from C(3) plants, and those fed a concentrate obtained from C(4) plants. Thirty-four Comisana male lambs (age 45 days) were assigned to three feeding treatments. Fourteen lambs were fed vetch (Vicia sativa) ad libitum. Another fourteen lambs received a barley-based concentrate. The remaining six lambs were fed a maize-based concentrate. After 60 days of experimental treatment the animals were slaughtered and the wool, perirenal fat and muscle longissimus dorsi were sampled. The delta(13)C and delta(15)N values of the muscle, wool and feed were measured by continuous flow elemental analysis (CF-EA)-IRMS. The delta(13)C of the fat was determined likewise. The isotopic composition of the tissues reflected that of the three diets. For the lambs which were fed herbage the muscle delta(13)C values were higher (P < 0.0005) and delta(15)N values were lower (P < 0.0005) than those of the lambs receiving concentrates. The delta(15)N and delta(13)C values in the muscle and delta(13)C values in the adipose tissue allowed perfect discrimination between the lambs fed the three different diets. The regression between the delta(13)C values measured in muscle and in wool of lambs was linear (R(2) = 0.99; P < 0.0005). This result shows that delta(13)C measured in the wool can predict muscle delta(13)C distribution, suggesting that wool is a valuable matrix for meat authentication.

Changes in productivity and profitability of wool-growing farms that follow recommendations from agricultural and veterinary studies.

PubMed

Lean, G R; Vizard, A L; Ware, J K

1997-10-01

To estimate the changes in productivity and profitability in a group of wool-growing farms as they adopted major recommendations from agricultural and veterinary studies. FARMS: Four wool-growing farms in south western Victoria were selected from the clients of the Mackinnon Project, a farm consultancy service run from the University of Melbourne. Each farm had closely followed recommended procedures, kept comprehensive financial and physical records and had been clients for at least 5 years. The comparison group was the South Western Victoria Monitor Farm Project (SWVMFP), about 45 farms in the same region as the study farms that were monitored annually by Agriculture Victoria. For a 7-year period, the financial and physical performance of both groups of farms was estimated. Stocking rate, wool production, gross farm income, farm operating costs, net farm income and return on assets were compared. Mean gross farm income of the four study farms steadily rose from 86% of the average SWVMFP farm before the adoption of recommendations to an average of 155%. During the same period, net farm income rose from 70% to 207% of the average of the SWVMFP. Return on asset of the four farms rose irregularly from 26% to 145% of the average of the SWVMFP. Farm operating costs on the four farms were higher than for the SWVMFP group, but the ratio of costs remained relatively constant. The adoption of proven research results was associated with large increases in net farm income. An increase in gross income, rather than a reduction in costs was the main reason for this. Research results offer a way to increase the financial viability of wool-growing farmers, many of whom are currently unable to maintain their lifestyle, resources and infrastructure.

Wideband characterization of the complex wave number and characteristic impedance of sound absorbers.

PubMed

Salissou, Yacoubou; Panneton, Raymond

2010-11-01

Several methods for measuring the complex wave number and the characteristic impedance of sound absorbers have been proposed in the literature. These methods can be classified into single frequency and wideband methods. In this paper, the main existing methods are revisited and discussed. An alternative method which is not well known or discussed in the literature while exhibiting great potential is also discussed. This method is essentially an improvement of the wideband method described by Iwase et al., rewritten so that the setup is more ISO 10534-2 standard-compliant. Glass wool, melamine foam and acoustical/thermal insulator wool are used to compare the main existing wideband non-iterative methods with this alternative method. It is found that, in the middle and high frequency ranges the alternative method yields results that are comparable in accuracy to the classical two-cavity method and the four-microphone transfer-matrix method. However, in the low frequency range, the alternative method appears to be more accurate than the other methods, especially when measuring the complex wave number.

[Anthrax in the canton of Zurich between 1878 and 2005].

PubMed

Brandes Ammann, A; Brandl, H

2007-07-01

Historical records reporting cases of animal anthrax in the canton of Zurich between 1878 and 2005 were analysed on the level of political communities regarding occurrence and number of cases, animals affected, and number of communities affected. Data were correlated with industrial activities (tanning, wool and horse hair processing) in a community and to the prevailing meteorological conditions. A total of 830 cases of animal anthrax has been recorded in 140 of 171 communities. Occurrence correlated with industrial activities in a community such as companies handling potentially contaminated materials (hides, fur, wool, hair, meat, or bone meal). The influence of wool processing companies (P = 0. 004) and tanneries (P = 0. 032) was significant whereas horse hair processing had no effect. However, a statistical relationship between the number of cases reported and meteorological data (rainfall, mean temperature) was not found.

Amino acid sequences of peptides from a chymotryptic digest of a urea-soluble protein fraction (U.S.3) from oxidized wool

PubMed Central

Corfield, M. C.; Fletcher, J. C.

1969-01-01

1. A chymotryptic digest of the protein fraction U.S.3. from oxidized wool was separated into 51 peptide fractions by chromatography on a column of cation-exchange resin. 2. The less acidic fractions were separated into their component peptides by a combination of cation-exchange-resin chromatography, paper chromatography and paper electrophoresis. 3. The amino acid sequences of 34 of these peptides were elucidated, and those of 14 others partially determined. 4. Overlaps between the tryptic and chymotryptic peptides from fraction U.S.3 have enabled ten extended amino acid sequences to be deduced, the longest containing 20 amino acid residues. 5. The relevance of the results to the structures of the helical and non-helical regions of wool is discussed. PMID:5395876

A Simple Experiment To Measure the Content of Oxygen in the Air Using Heated Steel Wool

ERIC Educational Resources Information Center

Vera, Francisco; Rivera, Rodrigo; Nunez, Cesar

2011-01-01

The typical experiment to measure the oxygen content in the atmosphere uses the rusting of steel wool inside a closed volume of air. Two key aspects of this experiment that make possible a successful measurement of the content of oxygen in the air are the use of a closed atmosphere and the use of a chemical reaction that involves the oxidation of…

Knowledge Types Used by Researchers and Wool Producers in Australia under a Workplace Learning Typology: Implications for Innovation in the Australian Sheep Industry

ERIC Educational Resources Information Center

Thompson, Lyndal-Joy; Reeve, Ian

2011-01-01

This paper reports on research into the learning aspects of adopting integrated parasite management practices for sheep (IPM-s) applying a workplace learning framework. An analysis of four primary data sources was conducted; a postal survey of Australian wool producers, a Delphi process with IPM-s researchers, focus groups and interviews with wool…

Investigation on the biodurability of chemically different stone wool fibres.

PubMed

Bellmann, B; Muhle, H; Kamstrup, O; Draeger, U F

1995-05-01

The biodurability is one of the essential factors for a carcinogenic potential of mineral fibres. The in vivo solubility of commercial fibre products can be influenced by modifications of the chemical composition. Two types of experimental stone wool samples with new chemical composition were compared to a commercial stone wool sample. Sized fractions of these samples with median lengths of 7.1, 9.3 and 6.7 microns, respectively, and median diameters of 0.76, 1.02 and 0.63 microns, respectively, were intratracheally instilled into female Wistar rats with a single dose of 2 mg in 0.3 ml. 5 animals per group were sacrificed after 2 days, 1, 3, 6, 12 and 18 months. After low-temperature ashing of the lungs about 1,000 fibres per group and sacrifice date were analysed in SEM for length and diameter. The number of fibres in the total lung was calculated. An analysis of fibre number of different length and diameter fractions was used to estimate whether dissolution, breakage or mechanical clearance is responsible for the elimination of fibres from the lung. Results indicate that the breakage of fibres with length above 20 microns and the dissolution of fibres was faster in the experimental stone wool samples compared to the commercial sample.

Production of reactive oxygen species by phagocytic cells after exposure to glass wool and stone wool fibres - effect of fibre preincubation in aqueous solution.

PubMed

Zoller, T; Zeller, W J

2000-04-03

The potential of four man-made vitreous fibres (MMVFs) (glass wool Code A, stone wool Code G, HT-N and MMVF 21) and of two natural mineral fibres (crocidolite, erionite) to induce production of reactive oxygen species (ROS) by differentiated HL-60 cells (HL-60-M cells) was investigated by determination of luminol-enhanced chemiluminescence (CL). Quartz served as positive control. The same system was used to uncover possible influences of fibre preincubation in aqueous solutions on the ROS-generating potential. Following preincubation in unbuffered saline over about 4 weeks, Code A and G fibres showed decreased ROS-generating potential as compared to freshly suspended fibres. On the other hand, MMVF 21 and HT-N fibres as well as crocidolite and erionite showed no decreased CL after incubation in aqueous solutions. The observed decrease of the ROS-generating potential of Code A and G fibres after preincubation may be an expression of fibre surface alterations (leaching, initiation of dissolution) that influences the response of exposed phagocytic cells. After incubation of both fibres in buffered solutions at different pH values (5.0, 7.4) a reduced ROS-generating potential was still discernible as compared to freshly suspended fibres.

A review of experimental evidence for the carcinogenicity of man-made vitreous fibers.

PubMed

Davis, J M

1986-01-01

This paper reviews experimental studies on the carcinogenicity of man-made vitreous fibers. Long-term inhalation studies using several animal species and dust preparations of fibrous glass, rock wool or slag wool have produced little evidence of pulmonary fibrosis or pulmonary tumors. While some intratracheal injection studies found almost no pathological changes in lung tissue, some showed that pulmonary fibrosis can occur. Only one intratracheal injection study has reported that vitreous fibers can be carcinogenic; in contrast, many workers have reported that, following intrapleural or intraperitoneal injection, man-made vitreous fibers are highly carcinogenic, and tumor production appears to be closely related to fiber size. In vitro tests confirm that vitreous fibers can be toxic and can cause neoplastic transformation of cultured cells. The discrepancies between some experimental studies probably result from the relatively high solubility of most vitreous fibers. It seems likely that, while these fibers can survive in body cavities long enough to cause tumor production, they dissolve in lung tissue fast enough to have relatively little harmful effect. Rock-wool fibers appear more durable than glass- or slag-wool fibers, and, with similar fiber numbers and sizes in any dust cloud, this material is the most likely to have harmful potential.

Influence of a glass wool hot vapour filter on yields and properties of bio-oil derived from rapid pyrolysis of paddy residues.

PubMed

Pattiya, Adisak; Suttibak, Suntorn

2012-07-01

This article reports experimental results of rapid or fast pyrolysis of rice straw (RS) and rice husk (RH) in a fluidised-bed reactor unit incorporated with a hot vapour filter. The objective of this research was to investigate the effects of pyrolysis temperatures and the use of glass wool hot vapour filtration on pyrolysis products. The results showed that the optimum pyrolysis temperatures for RS and RH were 405 and 452 °C, which gave maximum bio-oil yields of 54.1 and 57.1 wt.% on dry biomass basis, respectively. The use of the hot filter led to a reduction of 4-7 wt.% bio-oil yield. Nevertheless, the glass wool hot filtered bio-oils appeared to have better quality in terms of initial viscosity, solids content and ash content than the non-filtered ones. Copyright © 2012 Elsevier Ltd. All rights reserved.

Method for the production of mineral wool and iron from serpentine ore

DOEpatents

O'Connor, William K [Albany, OR; Rush, Gilbert E [Scio, OR; Soltau, Glen F [Lebanon, OR

2011-10-11

Magnesium silicate mineral wools having a relatively high liquidus temperature of at least about 1400.degree. C. and to methods for the production thereof are provided. The methods of the present invention comprise melting a magnesium silicate feedstock (e.g., comprising a serpentine or olivine ore) having a liquidus temperature of at least about 1400.degree. C. to form a molten magnesium silicate, and subsequently fiberizing the molten magnesium silicate to produce a magnesium silicate mineral wool. In one embodiment, the magnesium silicate feedstock contains iron oxide (e.g., up to about 12% by weight). Preferably, the melting is performed in the presence of a reducing agent to produce an iron alloy, which can be separated from the molten ore. Useful magnesium silicate feedstocks include, without limitation, serpentine and olivine ores. Optionally, silicon dioxide can be added to the feedstock to lower the liquidus temperature thereof.

METHOD FOR REMOVING SODIUM OXIDE FROM LIQUID SODIUM

DOEpatents

Bruggeman, W.H.; Voorhees, B.G.

1957-12-01

A method is described for removing sodium oxide from a fluent stream of liquid sodium by coldtrapping the sodium oxide. Apparatus utilizing this method is disclosed in United States Patent No. 2,745,552. Sodium will remain in a molten state at temperatures below that at which sodium oxide will crystallize out and form solid deposits, therefore, the contaminated stream of sodium is cooled to a temperature at which the solubility of sodium oxide in sodium is substantially decreased. Thereafter the stream of sodium is passed through a bed of stainless steel wool maintained at a temperature below that of the stream. The stream is kept in contact with the wool until the sodium oxide is removed by crystal growth on the wool, then the stream is reheated and returned to the system. This method is useful in purifying reactor coolants where the sodium oxide would otherwise deposit out on the walls and eventually plug the coolant tubes.

Mechanical Property Analysis on Sandwich Structured Hybrid Composite Made from Natural Fibre, Glass Fibre and Ceramic Fibre Wool Reinforced with Epoxy Resin

NASA Astrophysics Data System (ADS)

Bharat, K. R.; Abhishek, S.; Palanikumar, K.

2017-06-01

Natural fibre composites find wide range of applications and usage in the automobile and manufacturing industries. They find lack in desired properties, which are required for present applications. In current scenario, many developments in composite materials involve the synthesis of Hybrid composite materials to overcome some of the lacking properties. In this present investigation, two sandwich structured hybrid composite materials have been made by reinforcing Aloe Vera-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and Sisal fibre-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and its mechanical properties such as Tensile, Flexural and Impact are tested and analyzed. The test results from the two samples are compared and the results show that sisal fibre reinforced hybrid composite has better mechanical properties than aloe vera reinforced hybrid composite.

Economic Cost of Ovine Johne’s Disease in Clinically Affected New Zealand Flocks and Benefit-Cost of Vaccination

PubMed Central

Gautam, Milan; Anderson, Peter; Ridler, Anne; Wilson, Peter; Heuer, Cord

2018-01-01

The aims of this study were to estimate the on-fam economic cost of ovine Johne’s disease (OJD) based on collected incidence and mortality data, and the benefit-cost of OJD vaccination in typical OJD affected flocks in New Zealand after having vaccinated for a number of years. Owners of 20 sheep breeding and finishing farms known to be clinically affected by ovine Johne’s disease in New Zealand participated in the study and were monitored for up to two years. Farms were categorized as fine-wool (Merino, Half-Bred, Corriedale, n = 15), and other breeds (Romney, composite breeds, n = 5). Ovine JD was confirmed by gross- and histo-pathology in 358 ewes culled due to chronic progressive wasting. An additional 228 ewes with low body condition score (BCS), but not targeted for culling, were tested with ELISA to estimate the proportion of OJD in ewes in the lower 5% BCS of the flock. Calculations were done separately for fine-wool and other breeds. Based on the data, mortality due to OJD, its associated cost and the benefit-cost of vaccination were evaluated for a hypothetical farm with 2000 ewes by stochastic simulation. Total ewe mortality was similar in fine-wool and other breeds, but the estimated mortality due to OJD was 2.7 times as high in fine-wool (median 1.8%, interquartile range IQR 1.2–2.7%) than other breeds (median 0.69%, IQR 0.3–1.2%), but with large variation between farms. ELISA results demonstrated fine-wool sheep had a higher seroprevalence than other breeds (39%, 95% CI 18–61% vs. 9%, 95% CI 0–22%). Stochastic modelling indicated that the average annual cost of mortality due to OJD in a flock of 2000 ewes was NZD 13,100 (IQR 8900–18,600) in fine-wool and NZD 4300 (IQR 2200–7600) in other breeds. Vaccinating replacement lambs against OJD may be cost-effective in most flocks when the pre-vaccination annual ewe mortality due to OJD is >1%. To make the best-informed decision about vaccination it is therefore essential for farmers to accurately diagnose OJD to establish incidence. PMID:29382184

The ESR signals in silk fibroin and wool keratin under both the effect of UV-irradiation and without any external effects and the formation of free radicals.

PubMed

Mamedov, Sh V; Aktas, B; Cantürk, M; Aksakal, B; Alekperov, V; Bülbül, F; Yilgin, R; Aslanov, R B

2002-08-01

ESR studies have been done on natural and UV-irradiated silk fibroins and wool keratins at the temperature range of -196 degrees C to 20 C. The intensities of ESR signals obtained from the irradiated samples at -196 C remarkably increase with respect to those of natural samples. While the signals mainly consist of triplet peaks at -196 C. a doublet arises around the room temperatures. For the first time, at room temperature without any external effect the complicated ESR spectra of fibrous proteins (wool keratin and silk fibroin) whose components are as follows have been observed: (1) (for white wool keratin) a central doublet with deltaHm = 1.1 mT and g = 2.0075; deltaHm = 5mT and g = 2.1911; (2) a wide peak with deltaHm approximately 66 mT and g approximately 2.1575; (3) the 'sulfur' peak given in the literature with deltaHm = 2.2 mT and g = 2.0218; (4) the signal with deltaHm = 0.6 mT and g = 2.0065, and for silk fibroin, (a) a very wide signal with deltaHm approximately 70 mT and g approximately 2.084; (b) a very sharp signal with deltaHm approximately 1.1 mT and g approximately 2.01; and (c) relatively narrower signal with deltaHm approximately 5 mT and g approximately 2.336. It has been shown by recombination kinetic method that 30-50% of the free radicals formed by UV-irradiation do not undergo recombination up to 220 degrees C and 15 degrees C for silk libroin and wool keratin, respectively, even they keep their concentration constant for long period of time (weeks, months, even longer). In this article, considering above-mentioned results, the mechanism of signals observed in natural wool keratin and silk fibroin without any external effects is examined. We can briefly explain the role of the subject of the article, by considering fibrous proteins and some applications of the reactions by free radical occurring in these proteins tinder the effects of different factors in medicine and biology and the important role of oxidation and the other kinds of degradations on these processes. as well as the significant applications of ESR investigations on comprehending the processes by free radical.

High-resolution analysis of selection sweeps identified between fine-wool Merino and coarse-wool Churra sheep breeds.

PubMed

Gutiérrez-Gil, Beatriz; Esteban-Blanco, Cristina; Wiener, Pamela; Chitneedi, Praveen Krishna; Suarez-Vega, Aroa; Arranz, Juan-Jose

2017-11-07

With the aim of identifying selection signals in three Merino sheep lines that are highly specialized for fine wool production (Australian Industry Merino, Australian Merino and Australian Poll Merino) and considering that these lines have been subjected to selection not only for wool traits but also for growth and carcass traits and parasite resistance, we contrasted the OvineSNP50 BeadChip (50 K-chip) pooled genotypes of these Merino lines with the genotypes of a coarse-wool breed, phylogenetically related breed, Spanish Churra dairy sheep. Genome re-sequencing datasets of the two breeds were analyzed to further explore the genetic variation of the regions initially identified as putative selection signals. Based on the 50 K-chip genotypes, we used the overlapping selection signals (SS) identified by four selection sweep mapping analyses (that detect genetic differentiation, reduced heterozygosity and patterns of haplotype diversity) to define 18 convergence candidate regions (CCR), five associated with positive selection in Australian Merino and the remainder indicating positive selection in Churra. Subsequent analysis of whole-genome sequences from 15 Churra and 13 Merino samples identified 142,400 genetic variants (139,745 bi-allelic SNPs and 2655 indels) within the 18 defined CCR. Annotation of 1291 variants that were significantly associated with breed identity between Churra and Merino samples identified 257 intragenic variants that caused 296 functional annotation variants, 275 of which were located across 31 coding genes. Among these, four synonymous and four missense variants (NPR2_His847Arg, NCAPG_Ser585Phe, LCORL_Asp1214Glu and LCORL_Ile1441Leu) were included. Here, we report the mapping and genetic variation of 18 selection signatures that were identified between Australian Merino and Spanish Churra sheep breeds, which were validated by an additional contrast between Spanish Merino and Churra genotypes. Analysis of whole-genome sequencing datasets allowed us to identify divergent variants that may be viewed as candidates involved in the phenotypic differences for wool, growth and meat production/quality traits between the breeds analyzed. The four missense variants located in the NPR2, NCAPG and LCORL genes may be related to selection sweep regions previously identified and various QTL reported in sheep in relation to growth traits and carcass composition.

Catalytic Destruction of Chlorinated Volatile Organic Compounds

DTIC Science & Technology

1993-08-01

Figure 1. The glass reactor passed through two furnaces. Both the furnaces were Lindberg 55035 hinged tube type. The top furnace served the purpose...10. HC1 Scrubber 10 11 12 11 13 11. Thermocouples 12. Manometer Tap 13. Glass Wool Figure 1. Schematic of the Reactor were used to check the...In the case of catalyst pellets, a thin layer of glass wool was used to hold the bed in place. The chlorinated hydrocarbon feed was introduced into

Decontamination of Explosives-Contaminated Range Scrap Using A Transportable Hot Gas Decontamination (HGD) System: Cost & Performance Report

DTIC Science & Technology

2007-01-01

nonirritating, and a 9-micron diameter fiber nonrespirable, making handling safe and easy. • Basalt Mat, manufactured by BGF Industries (bgf.com). High...temperature mineral wool ( basalt fiber wool) mat blanket good to 1,500oF. Product is still under development as of 2002 but shows promise. 6.3...hazard to range technicians. • The Cerablanket® (manufactured by Thermal Ceramics) contains refractory ceramic fibers , which can potentially cause

Hydrogels from feather keratin show higher viscoelastic properties and cell proliferation than those from hair and wool keratins.

PubMed

Esparza, Yussef; Bandara, Nandika; Ullah, Aman; Wu, Jianping

2018-09-01

Hydrogel prepared from keratin shows potential applications in tissue engineering. However, the importance of the keratin sources has not been considered. The objectives of this study were to characterize and compare the rheological (storage modulus), physical (porosity, pore size, swelling capacity, and water contact angle) and in vitro cell compatibility of hydrogel scaffolds prepared from various keratin sources. Keratins were characterized by means of their molecular weight, amino acid composition, thermal and conformational properties. Hydrogels from chicken feather keratins demonstrated substantially higher storage modulus (G') than hair and wool keratin hydrogels. However, higher swelling capacity (>3000%) was determined in hair and wool over feather keratin (1500%) hydrogels. Our results suggest that small molecular weight and β-sheet conformation of feather keratin (~10 kDa) facilitated the self-assembly of rigid hydrogels through disulfide bond re-oxidation. Whereas, high molecular weight (10-75 kDa) stretchable α-helix conformation in hair and wool keratins resulted in weaker hydrogels. The cell cultures using fibroblasts showed the highest proliferation rate on chicken feather keratin hydrogel scaffolds. After 15 days of culture, partial breakdown of keratin fibers was observed. Results indicate that stiffer avian keratins can be used to fabricate more mechanically robust biomaterials than mammalian keratins. Copyright © 2018 Elsevier B.V. All rights reserved.

Restricting detergent protease action to surface of protein fibres by chemical modification.

PubMed

Schroeder, M; Lenting, H B M; Kandelbauer, A; Silva, C J S M; Cavaco-Paulo, A; Gübitz, G M

2006-10-01

Due to their excellent properties, such as thermostability, activity over a broad range of pH and efficient stain removal, proteases from Bacillus sp. are commonly used in the textile industry including industrial processes and laundry and represent one of the most important groups of enzymes. However, due to the action of proteases, severe damage on natural protein fibres such as silk and wool result after washing with detergents containing proteases. To include the benefits of proteases in a wool fibre friendly detergent formulation, the soluble polymer polyethylene glycol (PEG) was covalently attached to a protease from Bacillus licheniformis. In contrast to activation of PEG with cyanuric chloride (50%) activation with 1,1'-carbonyldiimidazole (CDI) lead to activity recovery above 90%. With these modified enzymes, hydrolytic attack on wool fibres could be successfully prevented up to 95% compared to the native enzymes. Colour difference (DeltaE) measured in the three dimensional colour space showed good stain removal properties for the modified enzymes. Furthermore, half-life of the modified enzymes in buffers and commercial detergents solutions was nearly twice as high as those of the non-modified enzymes with values of up to 63 min. Out of the different modified proteases especially the B. licheniformis protease with the 2.0-kDa polymer attached both retained stain removal properties and did not hydrolyse/damage wool fibres.

Application of solid-phase microextraction with gas chromatography and mass spectrometry for the early detection of active moulds on historical woollen objects.

PubMed

Sawoszczuk, Tomasz; Syguła-Cholewińska, Justyna; Del Hoyo-Meléndez, Julio M

2017-02-01

The goal of this work was to determine the microbial volatile organic compounds emitted by moulds growing on wool in search of particular volatiles mentioned in the literature as indicators of active mould growth. The keratinolytically active fungi were inoculated on two types of media: (1) samples of wool placed on broths, and (2) on broths containing amino acids that are elements of the structure of keratin. All samples were prepared inside 20 mL vials (closed system). In the first case (1) the broths did not contain any sources of organic carbon, nitrogen, or sulfur, i.e. wool was the only nutrient for the moulds. A third type of sample was historical wool prepared in a Petri dish without a broth and inoculated with a keratinolytically active mould (open system). The microbial volatiles emitted by moulds were sampled with the headspace solid-phase microextraction method. Volatiles extracted on solid-phase microextraction fibers were analyzed in a gas chromatography with mass spectrometry system. Qualitative and quantitative analyses of chromatograms were carried out in search of indicators of metabolic activity. The results showed that there are three groups of volatiles that can be used for the detection of active forms of moulds on woollen objects. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Experimental Study of the Oxidation, Ignition, and Soot Formation Characteristics of Jet Fuel

DTIC Science & Technology

2010-09-29

section and controls the heat flux applied to six heated zones along the 4.11 m long driven section, and 2.5 cm thick mineral wool insulation that...The mixing manifold was insulated with 1.1 cm thick silicon foam rubber insulation, and the mixing vessel was insulated with 2.5 cm- thick mineral ... wool insulation. Experimental work for a number of compounds with variation in manifold and tank heating showed no observable difference in measured

Topical Lime Application for the Management of Munitions Constituents Following Blow-in-Place Operations

DTIC Science & Technology

2010-06-01

disposable glass pipettes with a small piece of glass wool at the bottom. On top of the glass wool was placed 0.5 g of Florisil, and 0.5 g of neutral...particles have a relatively slow dissolution rate (Lynch et al. 2003). Sufficient hydrated lime to effect complete destruction of the RDX particle...K. Hatfield, and J. J. Delfino. 2003. An exploratory approach to modeling explosive compound persistence and flux using dissolution kinetics

U.S. Clothing and Textile Trade with China and the World: Trends Since the End of Quotas

DTIC Science & Technology

2007-07-10

the road to quota-free trade for clothing and textiles, the MFA expanded the scope of the LTA to include wool and man-made fibers. However, concerns...starting a 10-year process of eliminating quotas for international trade in clothing and textiles. The ATC’s quota phase-out contained two concurrent...goods. The ATC also required that products from different categories — textiles and clothing, wool , cotton or man-made fibres, etc. — be included in

Mixture of natural fiber with gypsum to improve the fire resistance rating of a fire door: The effect of kapok fiber

NASA Astrophysics Data System (ADS)

Azieyanti, N. A.; Hakim, Alif; Hasini, Hasril

2017-10-01

A composite mixture of gypsum and natural fibers has been considered in this study to enhance the fire resistance rating of a fire door. Previously the materials used to make a fire door are gypsum and fiber wool where it acts as a protective coating. Normally this fire door must be compact and able to close on its own. Natural fibers have the ability to replace glass fiber cotton because of its features that are available in fiber glass wool. When using fiberglass, it can cause health problem once it is swallowed and inhaled, and may remain in the lungs indefinitely. It also can contribute to lungs cancer. Kapok fiber has been used in this experiment as natural fibers. The objective of the experiment is to analyze the fire resistant rating of the composite mixture of gypsum with kapok fiber. The scopes of the experiment consist of a preparation of composite mixture samples of gypsum with kapok fiber with different composition and thickness, and the fabrication of a fire resistant testing furnace. A testing of samples which were conducted in accordance with the standard MS 1073: PART 2:1996.

Identification and quantification of phencyclidine pyrolysis products formed during smoking.

PubMed

Lue, L P; Scimeca, J A; Thomas, B F; Martin, B R

1986-01-01

As a result of frequent phencyclidine (PCP) abuse, pyrolysis studies were conducted to further investigate its fate during smoking. Marijuana placebo cigarettes were impregnated with 3H-PCP X HCI and burned under conditions simulating smoking. Mainstream smoke was passed through glass wool filters as well as acidic and basic traps. Approximately 90% of the starting material could be accounted for in the first glass wool trap and cigarette holder. HPLC and GC/MS analysis of methanol extracts of these glass wool traps revealed the presence of 1-phenyl-1-cyclohexene (47% of the starting material) greater than PCP (40%) greater than piperidine (15%) greater than N-acetylpiperidine (9%). It was not possible to fully account for the remainder of the piperidine moiety. It has been reported that at high temperatures PCP is converted to numerous polynuclear aromatic compounds which include styrene, alpha-methylstyrene, naphthalene, 2-methylnaphthalene, 1-methylnaphthalene, biphenyl, cyclohexylbenzene, acenaphthene, phenanthrene, and anthracene. These compounds were not formed from PCP under smoking conditions.

Direct catalytic production of sorbitol from waste cellulosic materials.

PubMed

Ribeiro, Lucília Sousa; Órfão, José J de Melo; Pereira, Manuel Fernando Ribeiro

2017-05-01

Cotton wool, cotton textile, tissue paper and printing paper, all potential waste cellulosic materials, were directly converted to sorbitol using a Ru/CNT catalyst in the presence of H 2 and using only water as solvent, without any acids. Conversions up to 38% were attained for the raw substrates, with sorbitol yields below 10%. Ball-milling of the materials disrupted their crystallinity, allowing reaching 100% conversion of cotton wool, cotton textile and tissue paper after 4h, with sorbitol yields around 50%. Mix-milling these materials with the catalyst greatly enhanced their conversion rate, and the materials were efficiently converted to sorbitol with a yield around 50% in 2h. However, ball- and mix-milled printing paper presented a conversion of only 50% after 5h, with sorbitol yields of 7%. Amounts of sorbitol of 0.525, 0.511 and 0.559g could be obtained from 1g of cotton wool, cotton textile and tissue paper, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Superhydrophobic silica wool—a facile route to separating oil and hydrophobic solvents from water

NASA Astrophysics Data System (ADS)

Crick, Colin R.; Bhachu, Davinder S.; Parkin, Ivan P.

2014-12-01

Silica microfiber wool was systematically functionalized in order to provide an extremely water repellent and oleophilic material. This was carried out using a two-step functionalization that was shown to be a highly effective method for generating an intense water repulsion and attraction for oil. A demonstration of the silica wools application is shown through the highly efficient separation of oils and hydrophobic solvents from water. Water is confined to the extremities of the material, while oil is absorbed into the voids within the wool. The effect of surface functionalization is monitored though observing the interaction of the material with both oils and water, in addition to scanning electron microscope images, x-ray photoelectron spectroscopy and energy dispersive x-ray analysis. The material can be readily utilized in many applications, including the cleaning of oil spills and filtering during industrial processes, as well as further water purification tasks—while not suffering the losses of efficiency observed in current leading polymeric materials.

Identification and quantification of phencyclidine pyrolysis products formed during smoking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lue, L.P.; Scimeca, J.A.; Thomas, B.F.

As a result of frequent phencyclidine (PCP) abuse, pyrolysis studies were conducted to further investigate its fate during smoking. Marijuana placebo cigarettes were impregnated with /sup 3/H-PCP HCl and burned under conditions simulating smoking. Mainstream smoke was passed through glass wool filters as well as acidic and basic traps. Approximately 90% of the starting material could be accounted for in the first glass wool trap and cigarette holder. HPLC and GC/MS analysis of methanol extracts of these glass wool traps revealed the presence of 1-phenyl-1-cyclohexene (47% of the starting material) > PCP (40%) > piperidine (15%) > N-acetylpiperidine (9%). Itmore » was not possible to fully account for the remainder of the piperidine moiety. It has been reported that at high temperatures PCP is converted to numerous polynuclear aromatic compounds which include styrene, ..cap alpha..-methylstyrene, naphthalene, 2-methyl-naphthalene, 1-methylnaphthalene, biphenyl, cyclohexylbenzene, acenaphthene, phenanthrene, and anthracene. These compounds were not formed from PCP under smoking conditions.« less

[Biological effects of artificial mineral fibers].

PubMed

Woźniak, H

1989-01-01

The present review paper was prepared on the basis of 52 source-books devoted to experimental investigations. Principal conclusions emerging from the experiments described in the references quoted are as follows. MMMF retention in alveoli is conditioned mainly by the fibres size--for fibres of constant dimater retention increases proportionally to their length, while long and thin fibres undergo degradation in fluids much more easily than the short and thick ones. Fibrous effect of glass fibres and glass wool is less remarkable than that of chrysotile and crocidolite; after exposure to glass fibre and wool has stopped, no progress of fibrous changes in animals was observed. In animals exposed to grass fibre or mineral wool through inhalation, the increase in cancer rate was not statistically significant; glass fibres introduced into the pleura showed a weaker tendency to induce neoplasms than the same amount of asbestos fibres, while basalt and ceramic wool induced reaction similar to that provoked by asbestos. In the case of combined exposure glass fibres intensified the toxic effect of styrene in mice and enhanced the incidence of lung cancer in rats exposed to radon. In in vitro study the destructive effect represented the distribution function of fibres size--long fibres (less than 10 microns) and thin fibres (less than 1 micron diameter) demonstrated stronger toxic effect. Glass fibres provoked neither mutations in bacterial test, nor sister chromatid exchange in animal cells in vitro. However, they caused mitosis delay and structural changes in chromosomes.

Extracting natural dyes from wool--an evaluation of extraction methods.

PubMed

Manhita, Ana; Ferreira, Teresa; Candeias, António; Dias, Cristina Barrocas

2011-05-01

The efficiency of eight different procedures used for the extraction of natural dyes was evaluated using contemporary wool samples dyed with cochineal, madder, woad, weld, brazilwood and logwood. Comparison was made based on the LC-DAD peak areas of the natural dye's main components which had been extracted from the wool samples. Among the tested methods, an extraction procedure with Na(2)EDTA in water/DMF (1:1, v/v) proved to be the most suitable for the extraction of the studied dyes, which presented a wide range of chemical structures. The identification of the natural dyes used in the making of an eighteenth century Arraiolos carpet was possible using the Na(2)EDTA/DMF extraction of the wool embroidery samples and an LC-DAD-MS methodology. The effectiveness of the Na(2)EDTA/DMF extraction method was particularly observed in the extraction of weld dye components. Nine flavone derivatives previously identified in weld extracts could be identified in a single historical sample, confirming the use of this natural dye in the making of Arraiolos carpets. Indigo and brazilwood were also identified in the samples, and despite the fact that these natural dyes were referred in the historical recipes of Arraiolos dyeing, it is the first time that the use of brazilwood is confirmed. Mordant analysis by ICP-MS identified the widespread use of alum in the dyeing process, but in some samples with darker hues, high amounts of iron were found instead.

Characterization of atmospheric pressure plasma treated wool/cashmere textiles: Treatment in nitrogen

NASA Astrophysics Data System (ADS)

Zanini, Stefano; Citterio, Attilio; Leonardi, Gabriella; Riccardi, Claudia

2018-01-01

We performed atmospheric pressure plasma treatments of wool/cashmere (15/85%) textiles with a dielectric barrier discharge (DBD) in nitrogen. The chemical properties of the plasma treated samples were investigated with attenuated total reflectance Fourier transform infrared (FTIR/ATR) spectroscopy, X-ray photoelectron microscopy (XPS), and fatty acid gas chromatographic analysis. Changes in mechanical properties and tactile performance of textiles after the plasma treatment were determined using the KES-F system. The analyses reveal significant surface modification of the treated fabrics, which enhances their surface wettability.

Sequence analysis and heterologous expression of the wool cuticle-degrading enzyme encoding genes in Fusarium oxysporum 26-1.

PubMed

Chaya, Etsushi; Suzuki, Tohru; Karita, Shuichi; Hanya, Akira; Yoshino-Yasuda, Shoko; Kitamoto, Noriyuki

2014-06-01

Two protease-like proteins, KrtA and KrtC, were identified in Fusarium oxysporum 26-1. Genes coding these proteins, krtA and krtC, were isolated and characterized. Recombinant KrtA (rKrtA) and KrtC (rKrtC) were successfully expressed in Aspergillus oryzae and secreted. The combination of rKrtA and rKrtC completely removed the cuticle of wool fibers. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Composition, Respirable Fraction and Dissolution Rate of 24 Stone Wool MMVF with their Binder.

PubMed

Wohlleben, Wendel; Waindok, Hubert; Daumann, Björn; Werle, Kai; Drum, Melanie; Egenolf, Heiko

2017-08-07

Man-made vitreous fibres (MMVF) are produced on a large scale for thermal insulation purposes. After extensive studies of fibre effects in the 1980ies and 1990ies, the composition of MMVF was modified to reduce the fibrotic and cancerogenic potential via reduced biopersistence. However, occupational risks by handling, applying, disposing modern MMVF may be underestimated as the conventional regulatory classification -combining composition, in-vivo clearance and effects- seems to be based entirely on MMVF after removal of the binder. Here we report the oxide composition of 23 modern MMVF from Germany, Finland, UK, Denmark, Russia, China (five different producers) and one pre-1995 MMVF. We find that most of the investigated modern MMVF can be classified as "High-alumina, low-silica wool", but several were on or beyond the borderline to "pre-1995 Rock (Stone) wool". We then used well-established flow-through dissolution testing at pH 4.5 and pH 7.4, with and without binder, at various flow rates, to screen the biosolubility of 14 MMVF over 32 days. At the flow rate and acidic pH of reports that found 47 ng/cm 2 /h dissolution rate for reference biopersistent MMVF21 (without binder), we find rates from 17 to 90 ng/cm 2 /h for modern MMVF as customary in trade (with binder). Removing the binder accelerates the dissolution significantly, but not to the level of reference biosoluble MMVF34. We finally simulated handling or disposing of MMVF and measured size fractions in the aerosol. The respirable fraction of modern MMVF is low, but not less than pre-1995 MMVF. The average composition of modern stone wool MMVF is different from historic biopersistent MMVF, but to a lesser extent than expected. The dissolution rates measured by abiotic methods indicate that the binder has a significant influence on dissolution via gel formation. Considering the content of respirable fibres, these findings imply that the risk assessment of modern stone wool may need to be revisited based on in-vivo studies of MMFV as marketed (with binder).

[Advances of transgenic breeding in livestock].

PubMed

Yu, Da-Wei; Zhu, Hua-Bin; DU, Wei-Hua

2011-05-01

Transgenic technology represents a revolutionary way to produce elite livestock breeds, allowing introduction of alien gene into livestock genome. Currently, pronuclear microinjection of DNA and somatic cell nuclear transfer are two popular methods used to make transgenic farm animals. Transgenic technology can be used in livestock breeding for improving disease resistance, carcass composition, lactational performance, wool production, growth rate, and reproductive performance, as well as reducing negative environmental impact. In addition to introduction of animal transgenic technologies, this review described the status and the future perspective of transgenic breeding in livestock.

Identifying the Optimal Water-Occluding Earplugs: A Scientific Simulation Study.

PubMed

Kovoor, Joshua; Al Hussaini, Ali; Backhouse, Steven

2016-12-01

Numerous types of water-occluding earplugs are available as a means of preventing infection in patients with external and middle ear disease. However, little is known about the comparative efficacies of these earplugs with prolonged water exposure. In this study, we assessed the water impermeability of various earplug materials to prolonged water exposure. Nine earplugs were tested: cotton wool mixed with petroleum jelly, cotton wool externally coated with petroleum jelly, Blu-Tack, foam earplugs, silicone putty, silicone earplugs, flanged earplugs, and hard and soft silicone custom-moulds. Precision-engineered cups were filled with 30 mL water and sealed with lids that contained a 10 mm diameter hole to simulate the ear canal. The aperture was occluded with different earplugs, and the cup was inverted. Computer software was used to record the water loss to the nearest 10 milligrams 720 times over a three-hour period. The test was repeated five times for each material. The water permeability onset, rate, and total amount of water loss varied markedly between the materials; cotton wool mixed with petroleum jelly demonstrated the fastest onset of leak and the highest rate of water loss (p < 0.00001), as well as the largest amount of cumulative water loss (p = 0.00213). The soft silicone custom-mould plugs, hard silicone custom-mould plugs, foam plugs, and silicone putty demonstrated no leaks. This study demonstrates a wide range of water permeabilities of commonly used ear-occluding materials during prolonged water exposure. We found that the generally suggested regimen of cotton wool mixed with petroleum jelly may be inefficacious for substantial periods of water exposure.

preparation of microgram samples on iron wool for radiocarbon analysis via accelerator mass spectrometry: A closed-system approach

NASA Astrophysics Data System (ADS)

Verkouteren, R. Michael; Klouda, George A.; Currie, Lloyd A.; Donahue, Douglas J.; Jull, A. J. Timothy; Linick, T. W.

1987-11-01

A technique has been developed at NBS for the production of high quality targets for radiocarbon analysis by accelerator mass spectrometry (AMS). Our process optimizes chemical yields, ion currents and characterizes the chemical blank. The approach encompasses sample combustion to CO 2, catalytic reduction of CO 2 by Zn to CO, reduction to graphitic carbon on high-purity iron wool and in situ formation of a homogeneous iron-carbon bead; all steps are performed in a closed system. The total measurement system blank and variability are considered in the light of contributions from combustion, iron wool, reduction, bead formation and instrument blank. Additionally, use of this approach provides an increase in throughput, i.e. the effective management of large numbers of samples. Chemical yields for 50-800 μg C samples deposited on 15 mg iron wool were greater than 90%. Integrated 12C - ion currents observed were significant, being 4-64% of those observed in pure graphite. These currents are about an order of magnitude greater than those expected from dilution of graphite with an inert substrate. Isotopic accuracy, precision and blank were assessed by measuring the {14C }/{13C } ratios of a series of targets prepared from dead carbon and oxalic acid (SRM 4990C). Each target was typically measured for one hour; bead consumption was estimated at 5% to 10%. System blank subsequent to combustion was equivalent to (2.2 ± 0.5) μg modern carbon (chemistry + instrument); combustion blank currently stands at (0.4 ± 0.1) (SE, n = 6) μg C.

Controlling Indoor Air Pollution from Moxibustion

PubMed Central

Lu, Chung-Yen; Kang, Sy-Yuan; Liu, Shu-Hui; Mai, Cheng-Wei; Tseng, Chao-Heng

2016-01-01

Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO2), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy. PMID:27331817

Concentration of Enteroviruses, Adenoviruses, and Noroviruses from Drinking Water by Use of Glass Wool Filters▿

PubMed Central

Lambertini, Elisabetta; Spencer, Susan K.; Bertz, Phillip D.; Loge, Frank J.; Kieke, Burney A.; Borchardt, Mark A.

2008-01-01

Available filtration methods to concentrate waterborne viruses are either too costly for studies requiring large numbers of samples, limited to small sample volumes, or not very portable for routine field applications. Sodocalcic glass wool filtration is a cost-effective and easy-to-use method to retain viruses, but its efficiency and reliability are not adequately understood. This study evaluated glass wool filter performance to concentrate the four viruses on the U.S. Environmental Protection Agency contaminant candidate list, i.e., coxsackievirus, echovirus, norovirus, and adenovirus, as well as poliovirus. Total virus numbers recovered were measured by quantitative reverse transcription-PCR (qRT-PCR); infectious polioviruses were quantified by integrated cell culture (ICC)-qRT-PCR. Recovery efficiencies averaged 70% for poliovirus, 14% for coxsackievirus B5, 19% for echovirus 18, 21% for adenovirus 41, and 29% for norovirus. Virus strain and water matrix affected recovery, with significant interaction between the two variables. Optimal recovery was obtained at pH 6.5. No evidence was found that water volume, filtration rate, and number of viruses seeded influenced recovery. The method was successful in detecting indigenous viruses in municipal wells in Wisconsin. Long-term continuous filtration retained viruses sufficiently for their detection for up to 16 days after seeding for qRT-PCR and up to 30 days for ICC-qRT-PCR. Glass wool filtration is suitable for large-volume samples (1,000 liters) collected at high filtration rates (4 liters min−1), and its low cost makes it advantageous for studies requiring large numbers of samples. PMID:18359827

Controlling Indoor Air Pollution from Moxibustion.

PubMed

Lu, Chung-Yen; Kang, Sy-Yuan; Liu, Shu-Hui; Mai, Cheng-Wei; Tseng, Chao-Heng

2016-06-20

Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO₂), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy.

Synthetic vitreous fibers--inhalation studies.

PubMed

McConnell, E E

1994-12-01

Synthetic vitreous fibers (SVFs), often referred to as "man-made vitreous fibers," are a class of materials that have their major uses for insulation against heat and sound. The original fibers are produced by melting various types of rock, clay, etc. and then blowing or extruding them into fibers of particular properties. During production and use small fractions of airborne fibers can be generated. Because of this a series of state-of-the-art inhalation studies was initiated to study the possible health hazards presented by the four major types of vitreous materials [two types of insulation glass wool, rock wool, slag wool, and four types of refractory ceramic fibers (RCF)] found in the workplace or to which the general public may be exposed. Rats and hamsters (30 mg/m3 kaolin-based RCF only) were exposed by nose-only inhalation to 3, 16, or 30 mg/m3 for 6 hr/day, 5 days/week, for 18 (hamsters) or 24 (rats) months and were held for lifetime observation (until approximately 20% survival) to study the chronic toxicity and potential carcinogenic activity of these classes of SVFs. Chrysotile or crocidolite asbestos served as positive controls. All of the fibers stimulated an inflammatory response characterized by an increase in the number of pulmonary macrophages at the level of the terminal bronchioles and proximal alveoli. RCF produced interstitial fibrosis in the walls of the proximal alveoli as early as 3 months and rock wool by 12 months. The only fiber which showed carcinogenic activity was RCF which produced a dose-related increase in both primary lung neoplasms (rats only) and mesotheliomas (rats and hamsters).

Adsorption of benzo(a)pyrene on to asbestos and manmade mineral fibres in an aqueous solution and in a biological model solution.

PubMed Central

Gerde, P; Scholander, P

1988-01-01

The adsorption of benzo(a)pyrene (BaP) on to three types of asbestos (chrysotile antophyllite, and amosite) and three types of manmade mineral fibres (MMMF) (rock wool, slag wool, and glass wool) in a physiological water solution was studied. Adsorption was determined from the decrease in the liquid concentration of BaP on the addition of the solid material. Results show that all the fibres weakly adsorb BaP, approximately within the same order of magnitude. The combined adsorption of BaP and phosphatidylcholine (PC) on to chrysotile and amosite asbestos and on to rock wool in aqueous solution was also studied. PC, one of the major constituents in lung surfactant, forms a separate lipid phase in water consisting of micellar liposomes or lipid bilayers. A decrease in the liquid concentration of PC was found when any of the three materials was added, indicating adsorption of the lipid phase on to the fibres. A coincident decrease in the liquid concentration of BaP was also found indicating that BaP is readily solubilised in PC and will accompany the adsorption of this compound on to the fibres. Owing to the high lipid aqueous partition coefficient of BaP, it is concluded that the direct adsorption of BaP on to the fibres will be negligible when PC is present in the system even at low concentrations. Phospholipid adsorption by the fibres and not their direct adsorption of aromatic hydrocarbons should therefore be the crucial parameter for this indirect interaction between fibres and aromatic hydrocarbons. PMID:3196662

Efficacy of Silver Dihydrogen Citrate and Steam Vapor against a Human Norovirus Surrogate, Feline Calicivirus, in Suspension, on Glass, and on Carpet.

PubMed

Buckley, David; Dharmasena, Muthu; Fraser, Angela; Pettigrew, Charles; Anderson, Jeffery; Jiang, Xiuping

2018-06-15

Carpets and other soft surfaces have been associated with prolonged and reoccurring human norovirus (HuNoV) outbreaks. Environmental hygiene programs are important to prevent and control HuNoV outbreaks. Despite our knowledge of HuNoV transmission via soft surfaces, no commercially available disinfectants have been evaluated on carpets. Our aim was to adapt a current standardized method for virucidal testing by assessing two disinfection technologies, silver dihydrogen citrate (SDC) and steam vapor, against one HuNoV surrogate, feline calicivirus (FCV), on wool and nylon carpets. First, we evaluated the effect of both technologies on the appearance of carpet. Next, we evaluated the efficacy of SDC in suspension and the efficacy of SDC and steam vapor against FCV on a glass surface, each with and without serum. Lastly, we tested both technologies on two types of carpet, wool and nylon. Both carpets exhibited no obvious color changes; however, SDC treatments left a residue while steam vapor left minor abrasions to fibers. SDC in suspension and on glass reduced FCV by 4.65 log 10 and >4.66 log 10 PFU, respectively, but demonstrated reduced efficacy in the presence of serum. However, SDC was only efficacious against FCV on nylon (3.62-log 10 PFU reduction) and not wool (1.82-log 10 PFU reduction). Steam vapor reduced FCV by >4.93 log 10 PFU on glass in 10 s and >3.68 log 10 PFU on wool and nylon carpet carriers in 90 s. There was a limited reduction of FCV RNA under both treatments compared to that of infectivity assays, but RNA reductions were higher in samples that contained serum. IMPORTANCE Human noroviruses (HuNoV) account for ca. 20% of all diarrheal cases worldwide. Disease symptoms may include diarrhea and vomit, with both known to contribute to transmission. The prevention and control of HuNoV are difficult because they are environmentally resilient and resistant to many disinfectants. Several field studies have linked both hard and soft surfaces to HuNoV outbreaks. However, many disinfectants efficacious against HuNoV surrogates are recommended for hard surfaces, but no commercially available products have demonstrated efficacy against these surrogates on soft surfaces. Our research objectives were to evaluate liquid and steam-based technologies in suspension and on hard surface carriers in addition to adapting and testing a protocol for assessing the virucidal effects of disinfection technologies on carpet carriers. These results will inform both the government and industry regarding a standard method for evaluating the virucidal effects of disinfectants on carpet while demonstrating their efficacy relative to suspension and hard-surface tests. Copyright © 2018 American Society for Microbiology.

Smart options for simultaneous functionalization and pigment coloration of cellulosic/wool blends.

PubMed

Ibrahim, N A; Khalil, H M; El-Zairy, E M R; Abdalla, W A

2013-07-01

The present innovative research work deals with the individual use of chitosan (2.5 g/kg), Aloe vera (10 g/kg), triclosan (10 g/kg), TiO2-nanoparticles (TiO2-NP's, 10 g/kg), silicon micro-emulsion (20 g/kg) or a water/oil-repellent agent (40 g/kg) for modifying the pigment print paste to produce functionalized cotton/wool and viscose/wool pigment prints in one step process. The imparted functional properties such as antibacterial, antibacterial/UV-protection, soft-handle or water/oil-repellency together with the change in the printing properties were evaluated. Some of the obtained pigment prints were characterized by scanning electron microscope (SEM), and energy dispersive X-rays (EDX) to confirm deposition of certain functional additives on printed fabrics. The wide-range of imparted functional properties together with the depth of the obtained pigment prints were maintained over 80% even after 15 consecutive laundering cycles. The extent of retention in functional and pigment printing properties is influenced by the type of functional additive as well as the kind of substrate. Copyright © 2013 Elsevier Ltd. All rights reserved.

Re-aluminising the primary mirror of the South African Astronomical Observatory's 74-inch telescope

NASA Astrophysics Data System (ADS)

Crause, Lisa A.; Stoffels, John; Koorts, Willie; Christian, Brendt; de Water, Wilhelmina; Fransman, Timothy; Gibbons, Denville; Machete, Nelson; Sefako, Ramotholo R.; Taaibos, Sinethemba

2016-07-01

Telescope mirrors reside in harsh environments and thus require periodic re-aluminisation to maintain their reflectivity. The SAAO's Sutherland field station suffers from dust and frequent bouts of high humidity. Dust settling on the mirrors adheres to the upward-facing optical surfaces and is not removed by CO2 cleaning. The 74-inch primary mirror was unsuccessfully re-aluminised in April 2015. Parts of the mirror proved difficult to clean and the resulting coating included hazy, white patches in those problem areas. Cotton wool soaked with ferric chloride was used to strip small patches of coating, confirming that no optical surface damage had occurred. The 55 year-old aluminising equipment for the 74-inch required an extensive overhaul and the spruced up system was then used to re-coat the primary mirror in November 2015. We used the same de-ionised water, potassium hydroxide, sodium lauryl sulphate, cotton wool, safety gear and cleaning techniques employed by the mirror coating team at the neighbouring Southern African Large Telescope, as well as their Ocean Optics reflectometer to quantify the improvement in reflectivity. Measurements at 320 nm on different parts of the dirty primary ranged between 10 % and 70 %, while the new coating exceeded 95 % over the entire surface.

Static in-plane shear behaviour of prefabricated wood-wool panel wallettes

NASA Astrophysics Data System (ADS)

Noh, M. S. Md; Ahmad, Z.; Ibrahim, A.; Kamarudin, A. F.; Mokhatar, S. N.

2018-04-01

The green construction material and technique are the current issue toward improving sustainability in the construction industry in Malaysia. The use of construction material that produced from renewable resources is a part of the effort for greening this industry. WWCP (Wood-wool cement panel) is a wood based product available to the construction industry to be used as a structural building wall element. This renewable material has the potential to replace the less eco-friendly materials such as bricks and other masonry element. However, the behaviour of wall subjected to the different load conditions is not well established and therefore, this study aimed to investigate the structural behaviour of the small scale wall (wallettes) subjected to in-plane lateral load. As a comparison, two types of fabrication technique of wallettes with dimension of 1200 mm × 1200 mm (± 30 mm) were considered. The conventional vertical stacking technique was denoted as W1 and new propose techniques (cross laminated) was denoted as W2. Three replicates of each type were fabricated and tested under in-plane lateral load until failure. The test results revealed that, the wallettes fabricated using the new fabrication technique significantly increased two times in load carrying capacity compared to wallettes with conventional technique.

Adsorption of Cu(II), Hg(II), and Ni(II) ions by modified natural wool chelating fibers.

PubMed

Monier, M; Ayad, D M; Sarhan, A A

2010-04-15

The graft copolymerization of ethyl acrylate (EA) onto natural wool fibers initiated by potassium persulphate and Mohr's salt redox initiator system in limited aqueous medium was carried out in heterogeneous media. Ester groups of the grafted copolymers were partially converted into hydrazide function groups followed by hydrazone formation through reaction with isatin. Also the application of the modified fibers for metal ion uptake was studied using Cu(II), Hg(II) and Ni(II). The modified chelating fibers were characterized using FTIR spectroscopy, SEM and X-ray diffraction. 2009 Elsevier B.V. All rights reserved.

Nano polypeptide particles reinforced polymer composite fibers.

PubMed

Li, Jiashen; Li, Yi; Zhang, Jing; Li, Gang; Liu, Xuan; Li, Zhi; Liu, Xuqing; Han, Yanxia; Zhao, Zheng

2015-02-25

Because of the intensified competition of land resources for growing food and natural textile fibers, there is an urgent need to reuse and recycle the consumed/wasted natural fibers as regenerated green materials. Although polypeptide was extracted from wool by alkaline hydrolysis, the size of the polypeptide fragments could be reduced to nanoscale. The wool polypeptide particles were fragile and could be crushed down to nano size again and dispersed evenly among polymer matrix under melt extrusion condition. The nano polypeptide particles could reinforce antiultraviolet capability, moisture regain, and mechanical properties of the polymer-polypeptide composite fibers.

Evaluations of HRI (Heat Recovery Incinerators) at NS (Naval Station) Mayport and NAS (Naval Air Station) Jacksonville, Florida-Lessons Learned Report.

DTIC Science & Technology

1984-07-01

primary chamber is lined with 2 in. of insulating mineral wool and 4 in. of castable refractory with a service temperature of 2500*F. 5.5.5.4...material. The refractory should be air cooled by circulating combustion air between it and the outer shell. A minimum of 2-in.-high density mineral wool or...passes through the roof. The 50-ft-high and 6-ft-4-in.-O.D. stack is constructed of steel and lined with 4 in. of refractory and 2 in. of mineral

Genomic selection signatures in sheep from the Western Pyrenees.

PubMed

Ruiz-Larrañaga, Otsanda; Langa, Jorge; Rendo, Fernando; Manzano, Carmen; Iriondo, Mikel; Estonba, Andone

2018-03-22

The current large spectrum of sheep phenotypic diversity results from the combined product of sheep selection for different production traits such as wool, milk and meat, and its natural adaptation to new environments. In this study, we scanned the genome of 25 Sasi Ardi and 75 Latxa sheep from the Western Pyrenees for three types of regions under selection: (1) regions underlying local adaptation of Sasi Ardi semi-feral sheep, (2) regions related to a long traditional dairy selection pressure in Latxa sheep, and (3) regions experiencing the specific effect of the modern genetic improvement program established for the Latxa breed during the last three decades. Thirty-two selected candidate regions including 147 annotated genes were detected by using three statistical parameters: pooled heterozygosity H, Tajima's D, and Wright's fixation index F st . For Sasi Ardi sheep, chromosomes Ovis aries (OAR)4, 6, and 22 showed the strongest signals and harbored several candidate genes related to energy metabolism and morphology (BBS9, ELOVL3 and LDB1), immunity (NFKB2), and reproduction (H2AFZ). The major genomic difference between Sasi Ardi and Latxa sheep was on OAR6, which is known to affect milk production, with highly selected regions around the ABCG2, SPP1, LAP3, NCAPG, LCORL, and MEPE genes in Latxa sheep. The effect of the modern genetic improvement program on Latxa sheep was also evident on OAR15, on which several olfactory genes are located. We also detected several genes involved in reproduction such as ESR1 and ZNF366 that were affected by this selection program. Natural and artificial selection have shaped the genome of both Sasi Ardi and Latxa sheep. Our results suggest that Sasi Ardi traits related to energy metabolism, morphological, reproductive, and immunological features have been under positive selection to adapt this semi-feral sheep to its particular environment. The highly selected Latxa sheep for dairy production showed clear signatures of selection in genomic regions related to milk production. Furthermore, our data indicate that the selection criteria applied in the modern genetic improvement program affect immunity and reproduction traits.

Experience from a long-term carcinogenicity study with intraperitoneal injection of biosoluble synthetic mineral fibers.

PubMed

Grimm, Hans G; Bernstein, David M; Attia, Mahmoud; Richard, Jacques; De Reydellet, Aymon

2002-08-01

The carcinogenic potential in the intraperitoneal cavity of three newly developed biosoluble insulation glass wool fibers (M, P, and V) and one newly developed biosoluble insulation stone wool fiber (O) was investigated and compared to that of a previously developed soluble glass fiber (B). The in vitro dissolution coefficient of the three glass wool fibers ranged from 450 to 1037 ng/cm(2) x h and was 523 ng/cm(2) x h for the stone wool fiber. The in vitro dissolution coefficient of the B fiber was 580 ng/cm(2) x h. Groups of female Wistar rats (strain Crl: Wi BR) were exposed by repeated injections to doses of 0.5, 2, and 5 x 10(9) WHO fibers, which corresponds to between 41 mg to 724 mg fiber injected. In addition, 2 groups of crocidolite were used as positive controls at doses of 0.1 x 10(9) and 1 x 10(9) WHO fibers (0.5 and 5 mg). The in vitro dissolution coefficient of crocidolite is estimated to be approximately 1 ng/cm(2) x h. The protocol of the study and the size distribution of the test samples conformed to the European Commission Protocol EUR 18748 EN, and the study was executed under Good Laboratory Practice conditions. Two of the new insulation wools, fibers M and 0, showed no statistically significant tumorigenic response even at the very high dose of 5 x 10(9) WHO fibers injected. Fibers P and V showed a small tumorigenic response in the ip cavity similar in magnitude to the B fiber, which has been declared in the German fiber regulations as a noncarcinogenic fiber. The response to the soluble insulation fibers was notably different from that of the known carcinogen crocidolite, which produced 53% tumors at a comparatively low dose of 0.1 x 10(9) WHO fibers. The incidence of mesothelioma was found to be highly correlated to the incidence of intra-abdominal nodules and masses at different sites. The incidence of abdominal nodules and masses was highly correlated to the number of animals with ascites. The incidence of chronic peritonitis with fibrotic nodules at different organs also correlated with the incidence of mesotheliomas. Differences in etiology were observed between the massive doses of the highly soluble insulation wools when injected directly into the ip cavity and the lower doses of the extremely insoluble fiber crocidolite. The variability in this reaction and the impairment of animal health put into question the value of these massive doses in evaluating the carcinogenic response of soluble insulation wools. All of the fibers tested fulfilled the exoneration criteria with respect to carcinogenicity according to the European Directive 97/69/EC ("an appropriate intra-peritoneal test has not expressed signs of excessive carcinogenicity"). The dose as defined in the EC-Protocol EUR 18748 EN was 1 x 10(9) WHO fibers with a defined geometric spectrum. The influence of fiber dimensions on the ip tumor response and the difficulty in assessing the influence of the difference in background levels between this and previous studies make direct application of the German TRGS 905 criteria difficult; however, by comparison to fiber B, which in the TRGS 905 is considered as a noncarcinogenic fiber, all of the synthetic mineral fiber types tested in this study also appear to meet the intended German criteria for exoneration.

Judging The Effectiveness Of Wool Combing By The Entropy Of The Images Of Wool Slivers

NASA Astrophysics Data System (ADS)

Rodrigues, F. Carvalho; Carvalho, Fernando D.; Peixoto, J. Pinto; Silva, M. Santos

1989-04-01

In general it can be said that the textile industry endeavours to render a bunch of fibers chaotically distributed in space into an ordered spatial distribution. This fact is independent of the nature the fibers, i.e., the aim of getting into higher order states in the spatial distribution of the fibers dictates different industrial processes depending on whether the fibers are wool, cotton or man made but the all effect is centred on obtaining at every step of any of the processes a more ordered state regarding the spatial distribution of the fibers. Thinking about the textile processes as a method of getting order out of chaos, the concept of entropy appears as the most appropriate judging parameter on the effectiveness of a step in the chain of an industrial process to produce a regular textile. In fact, entropy is the hidden parameter not only for the textile industry but also for the non woven and paper industrial processes. It happens that in these industries the state of order is linked with the spatial distribution of fibers and to obtain an image of a spatial distribution is an easy matter. To compute the image entropy from the grey level distribution requires only the use of the Shannon formula. In this paper to illustrate the usefulness of employing the entropy of an image concept to textiles the evolution of the entropy of wool slivers along the combing process is matched against the state of parallelization of the fibbers along the seven steps as measured by the existing method. The advantages of the entropy method over the previous method based on diffraction is also demonstrated.

Titania nano-coated quartz wool for the photocatalytic mineralisation of emerging organic contaminants.

PubMed

Saracino, M; Pretali, L; Capobianco, M L; Emmi, S S; Navacchia, M L; Bezzi, F; Mingazzini, C; Burresi, E; Zanelli, A

2018-01-01

Many emerging contaminants pass through conventional wastewater treatment plants, contaminating surface and drinking water. The implementation of advanced oxidation processes in existing plants for emerging contaminant remediation is one of the challenges for the enhancement of water quality in the industrialised countries. This paper reports on the production of a TiO 2 nano-layer on quartz wool in a relevant amount, its characterisation by X-ray diffraction and scanning electron microscopy, and its use as a photocatalyst under ultraviolet radiation for the simultaneous mineralisation of five emerging organic contaminants (benzophenone-3, benzophenone-4, carbamazepine, diclofenac, and triton X-100) dissolved in deionised water and tap water. This treatment was compared with direct ultraviolet photolysis and with photocatalytic degradation on commercial TiO 2 micropearls. The disappearance of every pollutant was measured by high performance liquid chromatography and mineralisation was assessed by the determination of total organic carbon. After 4 hours of treatment with the TiO 2 nano-coated quartz wool, the mineralisation exceeds 90% in deionised water and is about 70% in tap water. This catalyst was reused for seven cycles without significant efficiency loss.

Factors Affecting the Persistence of Staphylococcus aureus on Fabrics

PubMed Central

Wilkoff, Lee J.; Westbrook, Louise; Dixon, Glen J.

1969-01-01

The persistence of Staphylococcus aureus (Smith) on wool blanket, wool gabardine, cotton sheeting, cotton knit jersey, cotton terry cloth, and cotton wash-and-wear fabrics was studied. The fabrics were exposed to bacterial populations by three methods: direct contact, aerosol, and a lyophilized mixture of bacteria and dust having a high content of textile fibers. The contaminated fabrics were held in 35 or 78% relative humidities at 25 C. In general, the persistence time of S. aureus populations on fabrics held in 35% relative humidity was substantially longer when the fabrics were contaminated by exposure to aerosolized cultures or to dust containing bacteria than when contaminated by direct contact. In a 78% relative humidity, bacterial populations on the fabrics persisted for substantially shorter periods of time regardless of the mode of contamination or fabric type. Cotton wash-and-wear fabric (treated with a modified triazone resin) was the material on which populations of S. aureus persisted for the shortest time. This organism retained its virulence for Swiss mice after being recovered from wool gabardine swatches held 4 weeks in 35% relative humidity and 6 weeks in 78% relative humidity. Images PMID:5775911

A comparison in vivo dacron wool (Swank) and polyester mesh (Pall) micropore blood transfusion filters in the prevention of pulmonary microembolism associated with massive transfusion.

PubMed Central

Barrett, J; Dhurandhar, H N; Miller, E; Litwin, M S

1975-01-01

Experiments were performed to compare the effectiveness in vivo of the two most widely used micropore blood transfusion filters in preventing detrimental physiologic changes associated with transfusion of microaggregate-containing blood. Exchange transfusion with stored blood having an elevated screen filtration pressure (SFP) through polyester mesh (Pall) filters (Group PM) was followed by decreases in arterial blood pH and O2 consumption, increases in arterial blood pyruvate and lactate concentrations, and a decrease in pulmonary DO2. The lungs of 5 of 6 animals revealed emboli far out in the pulmonary microcirculation. These changes did not occur in animals transfused through dacron wool (Swank) filters (Group DW). Even though an increase after transfusion in pulmonary Qs/Qt in Group PM did not achieve statistical significance when compared to pretransfusion Qs/Qt, it was significantly higher than that in animals in Group DW. Both filters removed considerable quantities of microaggregates; however, the polyester mesh (Pall) filters permitted passage of small microaggregates and development of ditrimental physiologic changes. Dacron wool (Swank) filters completely removed measurable microaggregates and detrimental changes did not occur. Images Fig. 1. Fig. 2. Fig. 3. PMID:242282

The effect of a new formaldehyde-free binder on the dissolution rate of glass wool fibre in physiological saline solution.

PubMed

Potter, Russell M; Olang, Nassreen

2013-04-12

The in-vitro dissolution rate of fibres is a good predictor of the in-vivo behavior and potential health effects of inhaled fibres. This study examines the effect of a new formaldehyde-free carbohydrate-polycarboxylic acid binder on the in-vitro dissolution rate of biosoluble glass fibres. Dissolution rate measurements in pH 7.4 physiological saline solution show that the presence of the binder on wool insulation glass fibres has no effect on their dissolution. There is no measurable difference between the dissolution rates of continuous draw fibres before and after binder was applied by dipping. Nor is there a measurable difference between the dissolution rates of a production glass wool sample with binder and that same sample after removal of the binder by low-temperature ashing. Morphological examination shows that swelling of the binder in the solution is at least partially responsible for the development of open channels around the glass-binder interface early in the dissolution. These channels allow fluid to reach the entire glass surface under the binder coating. There is no evidence of any delay in the dissolution rate as a result of the binder coating.

Impact of variations in the chemical composition of vitreous mineral fibers on biopersistence in rat lungs and consequences for regulation.

PubMed

Bellmann, Bernd; Schaeffer, Helmut A; Muhle, Hartwig

2010-08-01

The chronic toxicity of vitreous fibers is substantially dependent on their biopersistence. Removal of fibers deposited in the respiratory tract is dependent on a combination of physiological clearance processes (like mechanical translocation) and physico-chemical processes like dissolution and leaching. This publication presents data of about 60 different fibers investigated in the biopersistence test which was standardized in the European Union. This test is based on in vivo investigation of biopersistence after intratracheal instillation in rats of a respirable fiber fraction, and it is a basis for the regulatory classification of vitreous fibers. Regression analysis is carried out employing the data of glass fiber compositions and the corresponding results of biopersistence tests (half-times). The study leads to a model that enables prediction of half-times for stone wool fibers as well as for glass wool fibers on the basis of their chemical composition. The aim of this paper was to investigate the stringency of the existing limits for the range of the chemical composition of glass and stone wools in view of the currently available data base. For regulatory purposes, however, this model is currently not sufficient to replace biopersistence tests completely.

High-alumina low-silica HT stone wool fibers: a chemical compositional range with high biosolubility.

PubMed

Guldberg, Marianne; Jensen, Søren Lund; Knudsen, Torben; Steenberg, Thomas; Kamstrup, Ole

2002-04-01

Man-made vitreous fibers (MMVF) are classified within the European Union (EU) as carcinogenic category 3 (possibly carcinogenic), but criteria exist to exonerate fibers from this classification. The HT stone wool fiber type is a MMVF that fulfills European regulatory requirements for exoneration from classification as a carcinogen based on in vivo testing. The chemical composition of the fibers and the results of the in vivo and in vitro studies that defined the chemical compositional range for a CAS registry number for these fibers are presented and discussed. Results from in vitro dissolution measurements at pH 4.5 of 52 fiber compositions (9-23 wt% Al(2)O(3) and 32-47 wt% SiO(2)) ranging from traditional stone wool to the biosoluble HT fibers are presented. The results are evaluated as a function of the ratio Al/(Al+Si) in the glass network and as a function of the fraction of Si-O-Si linkages in the glass. It is suggested that the dissolution mechanism for these fibers relates to the density of the surface silica layer on dissolving fibers and that the fraction of Si-O-Si linkages influences this. (c) 2002 Elsevier Science (USA).

The effect of a new formaldehyde-free binder on the dissolution rate of glass wool fibre in physiological saline solution

PubMed Central

2013-01-01

The in-vitro dissolution rate of fibres is a good predictor of the in-vivo behavior and potential health effects of inhaled fibres. This study examines the effect of a new formaldehyde-free carbohydrate-polycarboxylic acid binder on the in-vitro dissolution rate of biosoluble glass fibres. Dissolution rate measurements in pH 7.4 physiological saline solution show that the presence of the binder on wool insulation glass fibres has no effect on their dissolution. There is no measurable difference between the dissolution rates of continuous draw fibres before and after binder was applied by dipping. Nor is there a measurable difference between the dissolution rates of a production glass wool sample with binder and that same sample after removal of the binder by low-temperature ashing. Morphological examination shows that swelling of the binder in the solution is at least partially responsible for the development of open channels around the glass-binder interface early in the dissolution. These channels allow fluid to reach the entire glass surface under the binder coating. There is no evidence of any delay in the dissolution rate as a result of the binder coating. PMID:23587247

Selecting wool-type fabrics for sensorial comfort in women office clothing for the cold season, using the multi-criteria decision analysis

NASA Astrophysics Data System (ADS)

Harpa, Rodica

2017-10-01

This article presents the strategy and the procedure used to achieve the declared goal: fabrics selection, pursuing sensorial comfort of a specific women-clothing item, by using the multi-criteria decision analysis. First, the objective evaluation of seven wool-type woven fabrics, suitable to the quality profile expected for the defined destination, was accomplished. Then, a survey was conducted on a sample of 187 consumers, women aged between 18 to 60 years old, with a background in the textile field, regarding both the preferences manifested in purchasing products, and the importance of various sensory perceptions through handling materials used in clothing products. Finally, the MCDM applied through the implementation of previous accomplished software STAT-ADM, allowed choosing the preferred wool-type fabric in order to get the expected sensorial comfort of women office trousers for the cold season, according to the previously established criteria. This overall approach showed good results in fabrics selection for assuring the sensorial comfort in women’s clothing, by using the multicriteria decision analysis based on a rating scale delivered by customers with knowledge in the textile field, but non-experts in the fabrics hand evaluation topic.

Comparison of extraction methods for the analysis of natural dyes in historical textiles by high-performance liquid chromatography.

PubMed

Valianou, Lemonia; Karapanagiotis, Ioannis; Chryssoulakis, Yannis

2009-12-01

Different methods for the extraction of Dactylopius coccus Costa, Rubia tinctorum L., Isatis tinctoria L., Reseda luteola L., Curcuma longa L. and Cotinus coggygria Scop. from wool fibres are investigated using high-performance liquid chromatography with diode array detector (HPLC-DAD). The efficiencies of five extraction methods which include the use of HCl (widely used extraction method), citric acid, oxalic acid, TFA and a combination of HCOOH and EDTA are compared on the basis of the (a) number, (b) relative quantities, measured as HPLC peak areas and (c) signal-to-noise ratios (S/N) of the compounds extracted from the wool substrates. Flavonoid glycosides and curcuminoids contained in R. luteola L. and C. longa L., respectively, according to liquid chromatography with mass spectrometry (LC-MS) identifications, are not detected after treating the fibres with HCl. All the other milder methods are successful in extracting these compounds. Experiments are performed using HPLC-DAD to compare the HPLC peak areas and the S/N of the following extracted compounds: indigotin, indirubin, curcumin, demethoxycurcumin, bisdemethoxycurcumin, fisetin, sulfuretin, luteolin, luteolin-7-O-glucoside, apigenin, carminic acid, alizarin, puruprin and rubiadin. It is shown that the TFA method provides overall the best results as it gives elevated extraction yields except for fisetin, luteolin, apigenin and luteolin-7-O-glucoside and highest S/N except for fisetin and luteolin-7-O-glucoside. It is noteworthy that treatment of the fibres with the typical HCl extraction method results overall in very low S/N. The TFA method is selected for further studies, as follows. First, it is applied on silk dyed samples and compared with the HCl method. The same relative differences of the TFA and HCl methods observed for the wool dyed samples are reported for the silk dyed samples too, except for rubiadin, luteolin and apigenin. Thus, in most cases, the nature of the substrate (wool or silk) appears to have negligible effects on the relative difference of the two extraction methods. Second, the selected TFA method is applied to treat wool and silk historical samples extracted from textiles of the Mamluk period, resulting in the identification of several colouring compounds. In all extraction methods mentioned above, DMSO is used to dissolve the dyes, after acid treatment.

Evaluation of Bosch-Based Systems Using Non-Traditional Catalysts at Reduced Temperatures

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Mansell, J. Matthew

2011-01-01

Oxygen and water resupply make open loop atmosphere revitalization (AR) systems unfavorable for long-term missions beyond low Earth orbit. Crucial to closing the AR loop are carbon dioxide reduction systems with low mass and volume, minimal power requirements, and minimal consumables. For this purpose, NASA is exploring using Bosch-based systems. The Bosch process is favorable over state-of-the-art Sabatier-based processes due to complete loop closure. However, traditional operation of the Bosch required high reaction temperatures, high recycle rates, and significant consumables in the form of catalyst resupply due to carbon fouling. A number of configurations have been proposed for next-generation Bosch systems. First, alternative catalysts (catalysts other than steel wool) can be used in a traditional single-stage Bosch reactor to improve reaction kinetics and increase carbon packing density. Second, the Bosch reactor may be split into separate stages wherein the first reactor stage is dedicated to carbon monoxide and water formation via the reverse water-gas shift reaction and the second reactor stage is dedicated to carbon formation. A series system will enable maximum efficiency of both steps of the Bosch reaction, resulting in optimized operation and maximum carbon formation rate. This paper details the results of testing of both single-stage and two-stage Bosch systems with alternative catalysts at reduced temperatures. These results are compared to a traditional Bosch system operated with a steel wool catalyst.

Three MOF-Templated Carbon Nanocomposites for Potential Platforms of Enzyme Immobilization with Improved Electrochemical Performance.

PubMed

Dong, Sheying; Peng, Lei; Wei, Wenbo; Huang, Tinglin

2018-05-02

An efficient and facile metal-organic framework (MOF)-template strategy for preparing carbon nanocomposites has been developed. First of all, a series of metal ions, including Fe 3+ , Zr 4+ , and La 3+ , were respectively connected with 2-aminoterephthalate (H 2 ATA) to form three metal-organic frameworks (MOFs) and then three novel MOF-derived materials were obtained by annealing them at 550 °C under N 2 atmosphere. The morphologies and microstructure results showed that they still retained the original structure of MOFs and formed carbon-supported metal oxide hybrid nanomaterials. Interestingly, it was found that La-MOF-NH 2 and its derived materials were first reported, which had wool-ball-like structure formed by many streaky-shaped particles intertwining each other. Furthermore, these MOF-derived materials were all successfully used as effective immobilization matrixes of acetylcholinesterase (AChE) to construct biosensors for the detection of methyl parathion. Especially, [La-MOF-NH 2 ] N 2 with wool-ball-like structure not only provided more active sites of multicontents to increase AChE immobilization amount but also facilitated the accessibility of electron transfer and shorten their diffusion length on the surface of electrode. Under optimal conditions, the biosensor based on [La-MOF-NH 2 ] N 2 displayed the widest linear range of 1.0 × 10 -13 -5.0 × 10 -9 g mL -1 and the lowest detection limit of 5.8 × 10 -14 g mL -1 in three biosensors. This study illustrates the feasibility and the potential of a series of MOF-derived materials for biosensors with improved electrochemical performance.

Epidemiological and Economic Evaluation of Alternative On-Farm Management Scenarios for Ovine Footrot in Switzerland

PubMed Central

Zingg, Dana; Steinbach, Sandro; Kuhlgatz, Christian; Rediger, Matthias; Schüpbach-Regula, Gertraud; Aepli, Matteo; Grøneng, Gry M.; Dürr, Salome

2017-01-01

Footrot is a multifactorial infectious disease mostly affecting sheep, caused by the bacteria Dichelobacter nodosus. It causes painful feet lesions resulting in animal welfare issues, weight loss, and reduced wool production, which leads to a considerable economic burden in animal production. In Switzerland, the disease is endemic and mandatory coordinated control programs exist only in some parts of the country. This study aimed to compare two nationwide control strategies and a no intervention scenario with the current situation, and to quantify their net economic effect. This was done by sequential application of a maximum entropy model (MEM), epidemiological simulation, and calculation of net economic effect using the net present value method. Building upon data from a questionnaire, the MEM revealed a nationwide footrot prevalence of 40.2%. Regional prevalence values were used as inputs for the epidemiological model. Under the application of the nationwide coordinated control program without (scenario B) and with (scenario C) improved diagnostics [polymerase chain reaction (PCR) test], the Swiss-wide prevalence decreased within 10 years to 14 and 5%, respectively. Contrary, an increase to 48% prevalence was observed when terminating the current control strategies (scenario D). Management costs included labor and material costs. Management benefits included reduction of fattening time and improved animal welfare, which is valued by Swiss consumers and therefore reduces societal costs. The net economic effect of the alternative scenarios B and C was positive, the one of scenario D was negative and over a period of 17 years quantified at CHF 422.3, 538.3, and −172.3 million (1 CHF = 1.040 US$), respectively. This implies that a systematic Swiss-wide management program under the application of the PCR diagnostic test is the most recommendable strategy for a cost-effective control of footrot in Switzerland. PMID:28560223

Calibrated vapor generator source

DOEpatents

Davies, John P.; Larson, Ronald A.; Goodrich, Lorenzo D.; Hall, Harold J.; Stoddard, Billy D.; Davis, Sean G.; Kaser, Timothy G.; Conrad, Frank J.

1995-01-01

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet.

Flow behavior of regenerated wool-keratin proteins in different mediums.

PubMed

Alemdar, Ayse; Iridag, Yesim; Kazanci, Murat

2005-04-01

Keratin is abundantly present in nature and the major component of hair, wool, feather, nail and horns. Dissolution of keratin is often required when non-textile applications are demanded. However, the low solubility of keratin in water is the major problem. It becomes unstable and precipitated when stored for a long time. Therefore, it is necessary to find a good solvent that provides high stability and easy processibility. In this research, we used formic acid and dimethylformamide (DMF) to dissolve regenerated keratin protein films. It is shown that formic acid is a good solvent for regenerated keratin proteins for the purpose of storage. Transparent and stable regenerated keratin solution is obtained in formic acid.

Analysis of Fundus Photography and Fluorescein Angiography in Nonarteritic Anterior Ischemic Optic Neuropathy and Optic Neuritis.

PubMed

Kim, Min Kyung; Kim, Ungsoo Samuel

2016-08-01

We evaluated fundus and fluorescein angiography (FAG) findings and characteristics that can help distinguish nonarteritic anterior ischemic optic neuropathy (NAION) from optic neuritis (ON). Twenty-three NAION patients and 17 ON with disc swelling patients were enrolled in this study. We performed fundus photography and FAG. The disc-swelling pattern, hyperemia grade, presence of splinter hemorrhages, cotton-wool spots, artery/vein ratio and degree of focal telangiectasia were investigated. The FAG findings for each patient were compared with respect to the following features: the pattern of disc leakage in the early phase, arteriovenous (artery/vein) transit time (second), and the presence and pattern of the filling delay. Cotton-wool spots, focal telangiectasia, and venous congestion were more common in the affected eyes of NAION patients. Upon FAG, 76.5% of the patients in the ON group exhibited normal choroidal circulation. However, 56.5% of patients in the NAION group demonstrated abnormal filling defects, such as peripapillary, generalized, or watershed zone filling delays. Fundus findings, including cotton-wool spots, focal telangiectasia, and venous congestion in the affected eye, may be clues that can be used to diagnose NAION. In addition, choroidal insufficiencies on FAG could be also helpful in differentiating NAION from ON.

Public health assessment for Rockwool Industries, Belton, Bell County, Texas, Region 6, CERCLIS number TXD066379645. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-08-03

The Rockwool Industries, Inc. (RWI) National Priorities List site is a 100 acre site one-mile east of downtown Belton in Bell County, Texas. The Facility manufactured two types of mineral wool insulation: Blow wool and batt wool. Three main contaminant source areas have been identified at the site. Source 1, in the middle portion of the site, includes contaminated soil associated with the South Shot Pile. Source 2, in the northern portion of the site, includes contaminated soils associated with the Cemetery Shot Pile. Source 3, in the northwest portion of the site includes contaminated soils associated with the Cemeterymore » Shot Pile. The primary waste types at the site include spent iron shot and baghouse dust. Secondary waste types include boiler blowdown water, stormwater runoff, recovered groundwater, and bricks. The Texas Department of Health (TDH) and the Agency for Toxic Substances and Disease Registry (ATSDR) evaluated the environmental information available for the site and identified several exposure situations for evaluation. These exposure situations include possible contact with site contaminants in the soil, surface water, sediment, and groundwater. The potential for exposure to site contaminants through the food chain was also examined. A brief review of the evaluation, organized by hazard category, is presented.« less

Summary of the development of a signature for detection of residual dust from collapse of the World Trade Center buildings

PubMed Central

Lowers, Heather A; Meeker, Gregory P; Lioy, Paul J; Lippmann, Morton

2014-01-01

The collapse of the World Trade Center (WTC) towers on September 11, 2001, caused lower Manhattan and adjacent areas to be covered in millimeters to centimeters of dust. WTC dust penetrated into indoor spaces, and public health concerns remain regarding exposure to possible residual dust in the affected areas. The goal of the studies outlined in this review was to determine which, if any, components of the bulk WTC dust are sufficiently above typical background dust levels in New York City to develop an analytical method to screen for the component(s). Components of the <150-µm-size fraction of the dust are gypsum, phases compatible with crushed concrete, man-made vitreous fibers (MMVFs), silica, lead, chrysotile asbestos, and other materials. Slag wool was the most common WTC MMVF, whereas soda-lime glass and rock wool were minor to trace constituents. Most background samples also contained gypsum, phases compatible with concrete, and MMVF. However, the proportions of the various MMVF in background samples are typically unlike those characteristic of bulk WTC dust. Results indicate that slag wool can be used as a signature marker to identify areas that contain potential residual WTC dust contamination at concentrations that are less than average background levels for the material. PMID:18478046

Modification of wool surface by liposomes for dyeing with weld.

PubMed

Montazer, Majid; Zolfaghari, Alireza; Toliat, Taibeh; Moghadam, Mohammad Bameni

2009-01-01

In this research work, wool surface has been modified by liposome to investigate its effects on dyeing with weld, a yellow natural dye. To do this, samples were first treated with aluminium sulphate and afterward with different concentrations of liposomes at various temperatures for 30 minutes and, finally, dyed with weld at 75, 85, and 95 degrees C for 30, 45, and 60 minutes. K/S values of fabric samples were calculated and washing, light and rub fastness properties of the samples were indicated. The results proposed that the sample treated with 1% liposomes and dyed at 75 degrees C for 60 min has the highest K/S value. The central composite design (CCD) used for the experimental plan with three variables on the results of color strength and statistical analysis confirms the optimum conditions obtained by the experimental results. It was also found that washing, light, wet, and dry rub fastness properties of samples dyed with weld, including liposomes, have not significantly changed. The results of water drop absorption indicated that the hydrophobicity is higher for the samples pretreated with liposomes. The SEM picture of wool sample treated with mordant and liposomes and finally dyed with weld shows a coated layer on the fiber surface.

Oil removal from runoff with natural sorbing filter fillers.

PubMed

Mažeikienė, Aušra; Vaiškūnaitė, Rasa; Vaišis, Vaidotas

2014-08-01

The aim of this paper was to investigate the ability of Lithuanian sheep wool waste and reeds (Phragmites australis) to absorb oil from runoff when it flows through filters filled with these materials. The third material that was analysed, the synthetic sorbent Fibroil, was chosen for comparing the results. The laboratory experiments were performed in several stages, with the following being filtrated: tap water with a diesel admixture, road runoff contaminated with oils, and also suspended solids. The significance of this work is due to the high runoff filtering rate (∼10 m/h) and high oil concentrations in the runoff (50-230 mg/L) used in the experiment. In these cases the use of sorbents is limited. Wool waste and reed (Phragmites australis) fillers are quite efficient (98-99%) in oil removal from runoff at a 10 m/h filtering rate. However, wool fillers clog up quickly. Reeds of the genus Phragmites australis are a natural source for the production of oil sorbents. The results obtained in this experimental work can be used in the design of equipment for the treatment of oil-contaminated runoff from gas stations as well as sullage from roads and tunnels. Copyright © 2014 Elsevier Ltd. All rights reserved.

Pyrolytic fate of piperidinocyclohexanecarbonitrile, a contaminant of phencyclidine, during smoking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lue, L.P.; Scimeca, J.A.; Thomas, B.F.

The pyrolysis products of 1-(1-piperidino)cyclo-hexanecarbonitrile (PCC), the major contaminant of illicit phencyclidine (PCP), have not been previously reported. In order to quantify PCC in mainstream smoke as well as to identify the pyrolysis products, (/sup 3/H)piperidino-(/sup 14/C)cyano-PCC was synthesized. Marijuana placebo cigarettes were impregnated with this double-labeled PCC and burned with an apparatus that simulated smoking. The mainstream smoke was passed through a series of traps containing glass wool, H/sub 2/SO/sub 4/, or NaOH. Approximately 75% of the /sup 3/H was collected in these traps, and 46, 11, and 5% of the /sup 14/C was found in the glass wool,more » H/sub 2/SO/sub 4/, and NaOH traps, respectively. Contents of the traps were analyzed by GC/MS. The glass wool trap contained 1-(1-piperidino)-1-cyclo-hexene, PCC, piperidine, and N-acetylpiperidine, and cyanide ion was detected in all three traps. Approximately 47% of the PCC was found intact in mainstream smoke. Approximately 58% was cleaved to form cyanide and 1-(1-piperidino)-1-cyclohexene. The latter was further broken down to cyclohexanone (which represented 21% of the starting material), piperidine (29%), and N-acetylpiperidine (7%), and about 2% remained intact.« less

High soil and groundwater arsenic levels induce high body arsenic loads, health risk and potential anemia for inhabitants of northeastern Iran.

PubMed

Taheri, Masumeh; Mehrzad, Jalil; Mahmudy Gharaie, Mohamad Hosein; Afshari, Reza; Dadsetan, Ahmad; Hami, Shakiba

2016-04-01

Arsenic bioavailability in rock, soil and water resources is notoriously hazardous. Geogenic arsenic enters the body and adversely affects many biochemical processes in animals and humans, posing risk to public health. Chelpu is located in NE Iran, where realgar, orpiment and pyrite mineralization is the source of arsenic in the macroenvironment. Using cluster random sampling strategy eight rocks, 23 soils, 12 drinking water resources, 36 human urine and hair samples and 15 adult sheep urine and wool samples in several large-scale herds in the area were randomly taken for quantification of arsenic in rock/soil/water, wool/hair/urine. Arsenic levels in rock/soil/water and wool/hair/urine were measured using inductively coupled plasma spectroscopy and atomic absorption spectrophotometry, respectively. While arsenic levels in rocks, soils and water resources hazardously ranged 9.40-25,873.3 mg kg(-1), 7.10-1448.80 mg kg(-1) and 12-606 μg L(-1), respectively, arsenic concentrations in humans' hair and urine and sheep's wool and urine varied from 0.37-1.37 μg g(-1) and 9-271.4 μg L(-1) and 0.3-3.11 μg g(-1) and 29.1-1015 μg L(-1), respectively. Local sheep and human were widely sick and slightly anemic. Hematological examination of the inhabitants revealed that geogenic arsenic could harm blood cells, potentially resulting in many other hematoimmunological disorders including cancer. The findings warn widespread exposure of animals and human in this agroecologically and geopolitically important region (i.e., its proximity with Afghanistan, Pakistan and Turkmenistan) and give a clue on how arsenic could induce infectious and non-infectious diseases in highly exposed human/animals.

Optimizing the position of insulating materials in flat roofs exposed to sunshine to gain minimum heat into buildings under periodic heat transfer conditions.

PubMed

Shaik, Saboor; Talanki, Ashok Babu Puttranga Setty

2016-05-01

Building roofs are responsible for the huge heat gain in buildings. In the present work, an analysis of the influence of insulation location inside a flat roof exposed directly to the sun's radiation was performed to reduce heat gain in buildings. The unsteady thermal response parameters of the building roof such as admittance, transmittance, decrement factor, and time lags have been investigated by solving a one-dimensional diffusion equation under convective periodic boundary conditions. Theoretical results of four types of walls were compared with the experimental results available in literature. The results reveal that the roof with insulation placed at the outer side and at the center plane of the roof is the most energy efficient from the lower decrement factor point of view and the roof with insulation placed at the center plane and the inner side of the roof is the best from the highest time lag point of view among the seven studied configurations. The composite roof with expanded polystyrene insulation located at the outer side and at the center plane of the roof is found to be the best roof from the lowest decrement factor (0.130) point of view, and the composite roof with resin-bonded mineral wool insulation located at the center plane and at the inner side of the roof is found to be energy efficient from the highest time lag point (9.33 h) of view among the seven configurations with five different insulation materials studied. The optimum fabric energy storage thicknesses of reinforced cement concrete, expanded polystyrene, foam glass, rock wool, rice husk, resin-bonded mineral wool, and cement plaster were computed. From the results, it is concluded that rock wool has the least optimum fabric energy storage thickness (0.114 m) among the seven studied building roof materials.

Effects of water addition to total mixed ration on water intake, nutrient digestibility, wool cortisol and blood indices in Corriedale ewes.

PubMed

Nejad, Jalil Ghassemi; Kim, Byong-Wan; Lee, Bae-Hun; Kim, Ji-Yung; Sung, Kyung-Il

2017-10-01

The objective of this study was to determine the effect of adding water to total mixed ration (TMR) on fresh water intake, nutrient digestibility, wool cortisol, and blood indices in Corriedale ewes under hot and humid conditions. Nine non-pregnant Corriedale ewes (ave. body weight = 41±3.5 kg) were individually fed diets based on maintenance requirements in metabolic crates. Ewes were assigned to three treatment groups according to a triplicate 3×3 Latin Square design for 3 periods of 21 days duration each (9 ewes per treatment, 27 replications). Treatments were TMR (crude protein [CP] = 16.1, total digestible nutrients = 69.1%) moisture levels for 40%, 50%, and 60%. No differences were found in body weight gain among all treatment groups (p>0.05). Nitrogen balance including digestible N, retained N, and urinary and fecal N showed no change among the treatment groups (p>0.05). Fresh water intake was the lower in 50% TMR moisture group than in the other groups (p<0.05). Other than ether extract which was higher in 60% TMR moisture group (p<0.05) the differences among nutrient digestibilities including CP, organic matter, dry matter, neutral detergent fiber, acid detergent fiber, and non-fiber carbohydrate were not significant (p>0.05). No significant difference was observed for serum protein, blood urea nitrogen, glucose, and triglyceride among the treatment groups (p>0.05). Wool and blood cortisol were not different among the treatment groups (p>0.05). Blood hematology including red blood cell, white blood cells, hemoglobin, hematocrit, basophils, and eosinophils were not different among the treatment groups (p>0.05). It is concluded that TMR moisture at 40%, 50%, and 60% had no effects on N balance parameters, and nutrient digestibilities except for the ether extract under hot and humid conditions. Additionally there were no effects on stress conditions include wool cortisol, as well as blood cortisol levels of ewes.

Calibrated vapor generator source

DOEpatents

Davies, J.P.; Larson, R.A.; Goodrich, L.D.; Hall, H.J.; Stoddard, B.D.; Davis, S.G.; Kaser, T.G.; Conrad, F.J.

1995-09-26

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet. 10 figs.

The implications of condensed tannins on the nutritive value of temperate forages fed to ruminants.

PubMed

Barry, T N; McNabb, W C

1999-04-01

New methodology for measuring forage condensed tannin (CT) content is described and the effects of CT upon forage feeding and nutritive value for ruminant animals are reviewed. CT react with forage proteins in a pH-reversible manner, with reactivity determined by the concentration, structure and molecular mass of the CT. Increasing concentrations of CT in Lotus corniculatus and Lotus pedunculatus reduce the rates of solubilization and degradation of fraction 1 leaf protein in the rumen and increase duodenal non-NH3 N flow. Action of medium concentrations of total CT in Lotus corniculatus (30-40 g/kg DM) increased the absorption of essential amino acids from the small intestine and increased wool growth, milk secretion and reproductive rate in grazing sheep without affecting voluntary feed intake, thus improving the efficiency of food conversion. High concentrations of CT in Lotus pedunculatus (75-100 g/kg DM) depressed voluntary feed intake and rumen carbohydrate digestion and depressed rates of body and wool growth in grazing sheep. The minimum concentration of CT to prevent rumen frothy bloat in cattle is defined as 5 g/kg DM and sheep grazing CT-containing legumes were shown to better tolerate internal parasite infections than sheep grazing non CT-containing forages. It was concluded that defined concentrations of forage CT can be used to increase the efficiencies of protein digestion and animal productivity in forage-fed ruminants and to develop more ecologically sustainable systems of controlling some diseases under grazing.

Cumulative energy demand and global warming potential of a building-integrated solar thermal system with/without phase change material.

PubMed

Lamnatou, Chr; Motte, F; Notton, G; Chemisana, D; Cristofari, C

2018-04-15

Building-integrated solar thermal (BIST) systems are a specific type of solar thermal systems which are integrated into the building and they participate in building functionality. The present article is about the life-cycle assessment of different options of a BIST system (Mediterranean climatic conditions: Ajaccio, France). The environmental profile of the studied configurations is assessed by means of CED (cumulative energy demand), GWP (global warming potential) and EPBT (energy payback time). The proposed configurations (for the collector) include: i) a system without PCM (phase change material) using only rock wool as insulation and ii) a system with PCM (myristic acid) and rock wool. Concerning life-cycle results based on CED and GWP 100a (scenario without recycling), the configuration without PCM shows 0.67 MJ prim /kWh and 0.06 kg CO 2.eq /kWh while the configuration with PCM presents 0.74 MJ prim /kWh and 0.08 kg CO 2.eq /kWh. Regarding EPBT, if the inputs for pumping/auxiliary heating are not taken into account, both configurations (with/without PCM) have almost the same EPBT (about 1.3 years). On the other hand, if the inputs for pumping/auxiliary heating are considered, EPBT is lower for the system with PCM. In addition, scenarios with recycling have been examined and the results demonstrate that recycling considerably improves the environmental profile of the studied configurations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Tunable damper for an acoustic wave guide

DOEpatents

Rogers, Samuel C.

1984-01-01

A damper for tunably damping acoustic waves in an ultrasonic waveguide is provided which may be used in a hostile environment such as a nuclear reactor. The area of the waveguide, which may be a selected size metal rod in which acoustic waves are to be damped, is wrapped, or surrounded, by a mass of stainless steel wool. The wool wrapped portion is then sandwiched between tuning plates, which may also be stainless steel, by means of clamping screws which may be adjusted to change the clamping force of the sandwiched assembly along the waveguide section. The plates are preformed along their length in a sinusoidally bent pattern with a period approximately equal to the acoustic wavelength which is to be damped. The bent pattern of the opposing plates are in phase along their length relative to their sinusoidal patterns so that as the clamping screws are tightened a bending stress is applied to the waveguide at 180.degree. intervals along the damping section to oppose the acoustic wave motions in the waveguide and provide good coupling of the wool to the guide. The damper is tuned by selectively tightening the clamping screws while monitoring the amplitude of the acoustic waves launched in the waveguide. It may be selectively tuned to damp particular acoustic wave modes (torsional or extensional, for example) and/or frequencies while allowing others to pass unattenuated.

Study of colouring effect of herbal hair formulations on graying hair

PubMed Central

Singh, Vijender; Ali, Mohammed; Upadhyay, Sukirti

2015-01-01

Objective: To screen the hair colouring properties of hair colorants/ herbal hair colouring formulations. Materials and Methods: The dried aqueous herbal extracts of Gudhal leaves (Hibiscus rosa-sinensis), Jatamansi rhizome (Nardostachys jatamansi), Kuth roots (Saussurea lappa), Kattha (Acacia catechu), Amla dried fruit (Embelica officinalis), were prepared. Coffee powder (Coffea arabica) and Henna powder (Lowsonia inermis) were taken in the form of powder (# 40). Fourteen herbal hair colorants were prepared from these dried aqueous herbal extracts and powders. Activities of hair colorants were observed on sheep wool fibers. On the basis of the above observation six hair colorants were selected. These six formulations were taken for trials on human beings. Observation: The formulation coded HD-3 gave maximum colouring effect on sheep wool fibers as well as on human beings and percentage of acceptance among the volunteers were in the following order: HD- 3 > HD- 4 > HD-1 > HD-13 > HD-14 > HD-11. Results and Discussion: The remarkable results were obtained from five herbal hair colorants, viz., HD-1, HD- 3, HD- 4, HD-13 and HD-14 on sheep wool fibers and human beings. Formulation HD-3, having gudhal, jatamansi, kuth, kattha, amla, coffee and henna, was the maximum accepted formulation and suggested that these herbs in combination acts synergistically in hair colouring action. It also concluded that jatamansi, present in different hair colorants, was responsible to provide maximum blackening on hair PMID:26130937

An epidemiological and toxicological evaluation of the carcinogenicity of man-made vitreous fiber, with a consideration of coexposures.

PubMed

Wong, O; Musselman, R P

1994-01-01

Exposure to man-made mineral (or vitreous) fiber (MMMF or MMVF) is a potential health concern in both occupational and environmental settings. Previous epidemiologic studies have reported a small increase of lung cancer among workers exposed to MMVF. Most of these studies were cohort studies and lacked information on fiber concentration, occupational coexposures, and cigarette smoking. Some of the coexposures were known human lung carcinogens and could have accounted for the small lung cancer excess. In a recently completed epidemiologic case-control study of lung cancer in MMVF workers exposed to slag wool fibers, we analyzed lung cancer risk in relation to cumulative fiber exposure (concentration and duration) and smoking history and controlled for other coexposures such as asbestos contamination. No increased lung cancer risk with exposure to slag wool fibers was found. As expected, however, we detected a strong confounding effect of smoking. The findings from this epidemiologic study were consistent with the results of recently completed toxicologic studies, which found that slag wool fibers of dimension classically associated with tumor induction ("Stanton" fibers) do not stay in the lung in sufficient quantity or time to induce tumors in animals. In this paper we emphasize the importance of confounding effects due to coexposures and provide guidelines to estimate the magnitude of potential confounding effects of coexposures such as smoking.

Tunable damper for an acoustic wave guide

DOEpatents

Rogers, S.C.

1982-10-21

A damper for tunably damping acoustic waves in an ultrasonic waveguide is provided which may be used in a hostile environment such as a nuclear reactor. The area of the waveguide, which may be a selected size metal rod in which acoustic waves are to be damped, is wrapped, or surrounded, by a mass of stainless steel wool. The wool wrapped portion is then sandwiched between tuning plates, which may also be stainless steel, by means of clamping screws which may be adjusted to change the clamping force of the sandwiched assembly along the waveguide section. The plates are preformed along their length in a sinusoidally bent pattern with a period approximately equal to the acoustic wavelength which is to be damped. The bent pattern of the opposing plates are in phase along their length relative to their sinusoidal patterns so that as the clamping screws are tightened a bending stress is applied to the waveguide at 180/sup 0/ intervals along the damping section to oppose the acoustic wave motions in the waveguide and provide good coupling of the wool to the guide. The damper is tuned by selectively tightening the clamping screws while monitoring the amplitude of the acoustic waves launched in the waveguide. It may be selectively tuned to damp particular acoustic wave modes (torsional or extensional, for example) and/or frequencies while allowing others to pass unattenuated.

Measurement of Electrical Conductivity into Tomato Cultivation Beds using Small Insertion Type Electrical Conductivity Sensor Designed for Agriculture

NASA Astrophysics Data System (ADS)

Kawashima, Kazuko; Futagawa, Masato; Ban, Yoshihiro; Asano, Yoshiyuki; Sawada, Kazuaki

Our group has studied on-site monitoring sensor for agricultural field. An electrical conductivity (EC) sensor had been fabricated using Si integrated circuit technology. EC information of solutions shows ion concentrations dissolving in water, and can be used as the index of nutrient concentration for plants. So, it is important to measure EC in real time and on site. Because our EC sensor (5mm×5mm in size) is smaller than other commercial ones (several centimeters), it is easy to insert and achieve measurement in rock wool. In this study, our sensor measured long term EC values in tomato cultivation soil and rock wool medium. At first, we calibrated a relationship between output voltages and EC values on the sensor. The sensor was confirmed about enough EC measurement range from 8 to 969mS/m. In long period measurement, the sensor was confirmed about continuous operation for over five months, and intermittent measurement for over a year. In measurement in the cultivation soil, the sensor indicated that water was kept and diffused in the soil. In contrast, it was found that water diffused without keeping in it in rock wool medium. We confirmed our small EC sensor is useful for on-site monitoring and analysis of solution concentration distribution in several kinds of cultivation bed in real time.

40 CFR 761.123 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... pads beneath electrical equipment, curbing, exterior structural building components, indoor vaults, and... after the hexane is exposed to air. EPA strongly recommends that the gauze (or glass wool) be prepared...

Anthrax

MedlinePlus

... made 22 sick. Anthrax is rare. It affects animals such as cattle, sheep, and goats more often ... People can get anthrax from contact with infected animals, wool, meat, or hides. It can cause three ...

The Sheep Genome Illuminates Biology of the Rumen and Lipid Metabolism

PubMed Central

Talbot, Richard; Maddox, Jillian F.; Faraut, Thomas; Wu, Chunhua; Muzny, Donna M.; Li, Yuxiang; Zhang, Wenguang; Stanton, Jo-Ann; Brauning, Rudiger; Barris, Wesley C.; Hourlier, Thibaut; Aken, Bronwen L.; Searle, Stephen M.J.; Adelson, David L.; Bian, Chao; Cam, Graham R.; Chen, Yulin; Cheng, Shifeng; DeSilva, Udaya; Dixen, Karen; Dong, Yang; Fan, Guangyi; Franklin, Ian R.; Fu, Shaoyin; Guan, Rui; Highland, Margaret A.; Holder, Michael E.; Huang, Guodong; Ingham, Aaron B.; Jhangiani, Shalini N.; Kalra, Divya; Kovar, Christie L.; Lee, Sandra L.; Liu, Weiqing; Liu, Xin; Lu, Changxin; Lv, Tian; Mathew, Tittu; McWilliam, Sean; Menzies, Moira; Pan, Shengkai; Robelin, David; Servin, Bertrand; Townley, David; Wang, Wenliang; Wei, Bin; White, Stephen N.; Yang, Xinhua; Ye, Chen; Yue, Yaojing; Zeng, Peng; Zhou, Qing; Hansen, Jacob B.; Kristensen, Karsten; Gibbs, Richard A.; Flicek, Paul; Warkup, Christopher C.; Jones, Huw E.; Oddy, V. Hutton; Nicholas, Frank W.; McEwan, John C.; Kijas, James; Wang, Jun; Worley, Kim C.; Archibald, Alan L.; Cockett, Noelle; Xu, Xun; Wang, Wen; Dalrymple, Brian P.

2014-01-01

Sheep (Ovis aries) are a major source of meat, milk and fiber in the form of wool, and represent a distinct class of animals that have a specialized digestive organ, the rumen, which carries out the initial digestion of plant material. We have developed and analyzed a high quality reference sheep genome and transcriptomes from 40 different tissues. We identified highly expressed genes encoding keratin cross-linking proteins associated with rumen evolution. We also identified genes involved in lipid metabolism that had been amplified and/or had altered tissue expression patterns. This may be in response to changes in the barrier lipids of the skin, an interaction between lipid metabolism and wool synthesis, and an increased role of volatile fatty acids in ruminants, compared to non-ruminant animals. PMID:24904168

[Chemical and physical characteristics and toxicology of man-made mineral fibers].

PubMed

Foà, V; Basilico, S

1999-01-01

The evidence for the adverse health effects following exposure to asbestos (i.e. fibrogenic and carcinogenic effect) has prompted widespread removal of asbestos-containing materials and led to banning of asbestos internationally (in Italy, DPR 257/1992), resulting in the increased use of substitutes composed of both naturally occurring and synthetic materials, including man made mineral fibres (MMMFs) and man made organic fibres (MMOF). MMMFs represent a family of synthetic, inorganic vitreous substances derived primarily from glass, rock, slag, or clay. MMMFs are further divided into two categories: 1) man made vitreous fibres (MMVFs), further divided as follows: a) fibrous glass, including mainly continuous filament, special purpose fibres; and microfibres. The materials are typically composed of oxides of silicon, calcium, sodium, potassium, aluminum, and boron. b) Mineral wool, including glass wool, rock wool (derived from magma rock) and slag wool (made from molten slag produced in metallurgical processes such as the production of iron, steel, or copper). The main components of rock wool and slag wool are oxides of silicon, calcium, magnesium, aluminum, and iron. 2) Refractory/ceramic fibres, amorphous or partially crystalline materials made from kaolin clay or oxides of aluminum, silicon or other metal oxides (i.e. oxides of zirconium and yttrium). Less commonly, refractory fibres are also made from non-oxide refractory materials such as silicon carbide, silicon nitride, or boron nitride. Industrial production of MMVFs began in the second half of the 19th century, while ceramic fibres production began more recently, in the early 1970s. Major uses of MMMFs include thermal, acoustic and aerospace insulation, fire proofing, reinforcing material in plastics, cement and textile, optic fibres, air and liquid filtration, friction products, refractory coatings. Serious questions have been raised about health implications of MMMFs. Suspicion about the possible occurrence of adverse effects following exposure to MMMFs arises mainly from some similarities of MMMFs with asbestos (fibrous aspects, inhalability, chemical composition, free radical formation). The fibre characteristics that have been identified as crucial in influencing the pathogenesis of fibre-related adverse respiratory effects can be mainly divided into two groups: fibre dimension, and chemical composition and structure. Fibre dimension plays a determining role in conditioning penetration in the lung. In a broad sense, the term "respirable" means "capable of being carried by breath into the respiratory system". For regulatory purposes, "respirable fibres" (i.e. RFP) are defined in most countries following WHO criteria: length > 5 microns, diameter < 3 microns, length/diameter > 3. MMMFs are generally produced as fibres of diameter higher than asbestos, and too large in diameter to be respirable. Moreover, due to the production process, they are structurally amorphous. Since MMMFs have no crystalline domains, they also have no clearly defined structural faults and they fracture transversely, and randomly. Fragments that are too large to be taken up by macrophages can be resolved in the lung by a leaching--or dissolution--process which leads to a progressive reduction of particle length. In contrast, when abraded, asbestos tends to split longitudinally into new, fine, straight fibres: these fibrils are of much smaller diameter, more respirable, and consequently more hazardous than parent fibres. Fibre chemical composition plays a determining role in conditioning the higher or lower biological activity, durability, biopersistence, and biodegradability. The term "biological activity" means reactivity or ability to interact (possibly due to formation of active oxygen species, identified as a crucial step in the mechanism of action) with biological structures and tissues. Fibre "durability" is strictly related to its solubility. It can be defined as the ability to resist

Eczema and Atopic Dermatitis

MedlinePlus

... to anything that can irritate your skin. Wear cotton gloves under plastic gloves to soak up sweat ... make your eczema worse. Wear clothes made of cotton or a cotton blend. Wool and some synthetic ...

HIV-related ocular microangiopathic syndrome and color contrast sensitivity.

PubMed

Geier, S A; Hammel, G; Bogner, J R; Kronawitter, U; Berninger, T; Goebel, F D

1994-06-01

Color vision deficits in patients with acquired immunodeficiency syndrome (AIDS) or human immunodeficiency virus (HIV) disease were reported, and a retinal pathogenic mechanism was proposed. The purpose of this study was to evaluate the association of color vision deficits with HIV-related retinal microangiopathy. A computer graphics system was used to measure protan, deutan, and tritan color contrast sensitivity (CCS) thresholds in 60 HIV-infected patients. Retinal microangiopathy was measured by counting the number of cotton-wool spots, and conjunctival blood-flow sludging was determined. Additional predictors were CD4+ count, age, time on aerosolized pentamidine, time on zidovudine, and Walter Reed staging. The relative influence of each predictor was calculated by stepwise multiple regression analysis (inclusion criterion; incremental P value = < 0.05) using data for the right eyes (RE). The results were validated by using data for the left eyes (LE) and both eyes (BE). The only included predictors in multiple regression analyses for the RE were number of cotton-wool spots (tritan: R = .70; deutan: R = .46; and protan: R = .58; P < .0001 for all axes) and age (tritan: increment of R [Ri] = .05, P = .002; deutan: Ri = .10, P = .004; and protan: Ri = .05, P = .002). The predictors time on zidovudine (Ri = .05, P = .002) and Walter Reed staging (Ri = .03, P = .01) were additionally included in multiple regression analysis for tritan LE. The results for deutan LE were comparable to those for the RE. In the analysis for protan LE, the only included predictor was number of cotton-wool spots. In the analyses for BE, no further predictors were included. The predictors Walter Reed staging and CD4+ count showed a significant association with all three criteria in univariate analysis. Additionally, tritan CCS was significantly associated with conjunctival blood-flow sludging. CCS deficits in patients with HIV disease are primarily associated with the number of cotton-wool spots. Results of this study are in accordance with the hypothesis that CCS deficits are in a relevant part caused by neuroretinal damage secondary to HIV-related microangiopathy.

Effect on skin hydration of using baby wipes to clean the napkin area of newborn babies: assessor-blinded randomised controlled equivalence trial.

PubMed

Lavender, Tina; Furber, Christine; Campbell, Malcolm; Victor, Suresh; Roberts, Ian; Bedwell, Carol; Cork, Michael J

2012-06-01

Some national guidelines recommend the use of water alone for napkin cleansing. Yet, there is a readiness, amongst many parents, to use baby wipes. Evidence from randomised controlled trials, of the effect of baby wipes on newborn skin integrity is lacking. We conducted a study to examine the hypothesis that the use of a specifically formulated cleansing wipe on the napkin area of newborn infants (<1 month) has an equivalent effect on skin hydration when compared with using cotton wool and water (usual care). A prospective, assessor-blinded, randomised controlled equivalence trial was conducted during 2010. Healthy, term babies (n=280), recruited within 48 hours of birth, were randomly assigned to have their napkin area cleansed with an alcohol-free baby wipe (140 babies) or cotton wool and water (140 babies). Primary outcome was change in hydration from within 48 hours of birth to 4 weeks post-birth. Secondary outcomes comprised changes in trans-epidermal water loss, skin surface pH and erythema, presence of microbial skin contaminants/irritants at 4 weeks and napkin dermatitis reported by midwife at 4 weeks and mother during the 4 weeks. Complete hydration data were obtained for 254 (90.7 %) babies. Wipes were shown to be equivalent to water and cotton wool in terms of skin hydration (intention-to-treat analysis: wipes 65.4 (SD 12.4) vs. water 63.5 (14.2), p=0.47, 95% CI -2.5 to 4.2; per protocol analysis: wipes 64.6 (12.4) vs. water 63.6 (14.3), p=0.53, 95% CI -2.4 to 4.2). No significant differences were found in the secondary outcomes, except for maternal-reported napkin dermatitis, which was higher in the water group (p=0.025 for complete responses). Baby wipes had an equivalent effect on skin hydration when compared with cotton wool and water. We found no evidence of any adverse effects of using these wipes. These findings offer reassurance to parents who choose to use baby wipes and to health professionals who support their use. Current Controlled Trials ISRCTN86207019.

Cellulosic building insulation versus mineral wool, fiberglass or perlite: installer's exposure by inhalation of fibers, dust, endotoxin and fire-retardant additives.

PubMed

Breum, N O; Schneider, T; Jørgensen, O; Valdbjørn Rasmussen, T; Skibstrup Eriksen, S

2003-11-01

A task-specific exposure matrix was designed for workers installing building insulation materials. A priori, a matrix element was defined by type of task (installer or helper), type of work area (attic spaces or wall cavities) and type of insulation material (slabs from mineral wool, fiberglass or flax; loose-fill cellulosic material or perlite). In the laboratory a mock-up (full scale) of a one-family house was used for simulated installation of insulation materials (four replicates per matrix element). Personal exposure to dust and fibers was measured. The dust was analyzed for content of endotoxin and some trace elements (boron and aluminum) from fire-retardant or mold-resistant additives. Fibers were characterized as WHO fibers or non-WHO fibers. In support of the exposure matrix, the dustiness of all the materials was measured in a rotating drum tester. For installers in attic spaces, risk of exposure was low for inhalation of dust and WHO fibers from slab materials of mineral wool or fiberglass. Slab materials from flax may cause high risk of exposure to endotoxin. The risk of exposure by inhalation of dust from loose-fill materials was high for installers in attic spaces and for some of the materials risk of exposure was high for boron and aluminum. Exposure by inhalation of cellulosic WHO fibers was high but little is known about the health effects and a risk assessment is not possible. For the insulation of walls, the risk of installers' exposure by inhalation of dust and fibers was low for the slab materials, while a high risk was observed for loose-fill materials. The exposure to WHO fibers was positively correlated to the dust exposure. A dust level of 6.1 mg/m3 was shown to be useful as a proxy for screening exposure to WHO fibers in excess of 10(6) fibers/m3. In the rotating drum, slabs of insulation material from mineral wool or fiberglass were tested as not dusty. Cellulosic loose-fill materials were tested as very dusty, and perlite proved to be extremely dusty.

Multicolor Scanning Laser Imaging in Diabetic Retinopathy.

PubMed

Ahmad, Mohammad S Z; Carrim, Zia Iqbal

2017-11-01

Diabetic retinopathy is a common cause of blindness in individuals younger than 60 years. Screening for retinopathy is undertaken using conventional color fundus photography and relies on the identification of hemorrhages, vascular abnormalities, exudates, and cotton-wool spots. These can sometimes be difficult to identify. Multicolor scanning laser imaging, a new imaging modality, may have a role in improving screening outcomes, as well as facilitating treatment decisions. Observational case series comprising two patients with known diabetes who were referred for further examination after color fundus photography revealed abnormal findings. Multicolor scanning laser imaging was undertaken. Features of retinal disease from each modality were compared. Multicolor scanning laser imaging provides superior visualization of retinal anatomy and pathology, thereby facilitating risk stratification and treatment decisions. Multicolor scanning laser imaging is a novel imaging technique offering the potential for improving the reliability of screening for diabetic retinopathy. Validation studies are warranted.

Growing and testing mycelium bricks as building insulation materials

NASA Astrophysics Data System (ADS)

Xing, Yangang; Brewer, Matthew; El-Gharabawy, Hoda; Griffith, Gareth; Jones, Phil

2018-02-01

In order to improve energy performance of buildings, insulation materials (such as mineral glass and rock wools, or fossil fuel-based plastic foams) are being used in increasing quantities, which may lead to potential problem with materials depletions and landfill disposal. One sustainable solution suggested is the use of bio-based, biodegradable materials. A number of attempts have been made to develop biomaterials, such as sheep wood, hemcrete or recycled papers. In this paper, a novel type of bio insulation materials - mycelium is examined. The aim is to produce mycelium materials that could be used as insulations. The bio-based material was required to have properties that matched existing alternatives, such as expanded polystyrene, in terms of physical and mechanical characteristics but with an enhanced level of biodegradability. The testing data showed mycelium bricks exhibited good thermal performance. Future work is planned to improve growing process and thermal performance of the mycelium bricks.

A high resolution Passive Flux Meter approach based on colorimetric responses

NASA Astrophysics Data System (ADS)

Chardi, K.; Dombrowski, K.; Cho, J.; Hatfield, K.; Newman, M.; Annable, M. D.

2016-12-01

Subsurface water and contaminant mass flux measurements are critical in determining risk, optimizing remediation strategies, and monitoring contaminant attenuation. The standard Passive Flux Meter, hereafter knows as a (PFM), is a well-developed device used for determining and monitoring rates of groundwater and contaminant mass flux in screened wells. The current PFM is a permeable device that contains granular activated carbon impregnated with alcohol tracers which is deployed in a flow field for a designated period of time. Once extracted, sampling requires laboratory analysis to quantify Darcy flux, which can be time consuming and have significant cost. To expedite test results, a modified PFM based on the image analysis of colorimetric responses, herein referred to as a colorimetric Passive Flux Meter (cPFM), was developed. Various dyes and sorbents were selected and evaluated to determine colorimetric response to water flow. Rhodamine, fluorescent yellow, fluorescent orange, and turmeric were the dye candidates while 100% wool and a 35% wool blend with 65% rayon were the sorbent candidates selected for use in the cPFM. Ultraviolet light image analysis was used to calculate average color intensity using ImageJ, a Java-based image processing program. These results were then used to quantify Darcy flux. Error ranges evaluated for Darcy flux using the cPFM are comparable to those with the standard, activated carbon based, PFM. The cPFM has the potential to accomplish the goal of obtaining high resolution Darcy flux data while eliminating high costs and analysis time. Implications of groundwater characteristics, such as PH and contaminant concentrations, on image analysis are to be tested through laboratory analysis followed by field testing of the cPFM.

Genetic trend for growth and wool performance in a closed flock of Bharat Merino sheep at sub temperate region of Kodai hills, Tamil Nadu.

PubMed

Mallick, P K; Thirumaran, S M K; Pourouchottamane, R; Rajapandi, S; Venkataramanan, R; Nagarajan, G; Murali, G; Rajendiran, A S

2016-03-01

The study was conducted at Southern Regional Research Center, ICAR-Central Sheep and Wool Research Institute (CSWRI), Mannavanur, Kodaikanal, Tamil Nadu to estimate genetic trends for birth weight (BWT), weaning weight (3WT), 6 months weight (6WT), and greasy fleece weight (GFY) in a Bharat Merino (BM) flock, where selection was practiced for 6WT and GFY. The data for this study represents a total of 1652 BM lambs; progeny of 144 sires spread over 15 years starting from 2000 to 2014, obtained from the BM flock of ICAR-SRRC (CSWRI), Mannavanur, Kodaikanal, Tamil Nadu, India. The genetic trends were calculated by regression of average predicted breeding values using software WOMBAT for the traits BWT, 3WT, 6WT and GFY versus the animal's birth year. The least square means were 3.28±0.02 kg, 19.08±0.23 kg, 25.00±0.35 kg and 2.13±0.07 kg for BWT, 3WT, 6WT and GFY, respectively. Genetic trends were positive and highly significant (p<0.01) for BWT, while the values for 3WT, 6WT and GFY though positive, were not significant. The estimates of genetic trends in BWT, 3WT, 6WT and GFY were 5 g, 0.8 g, 7 g and 0.3 g/year gain and the fit of the regression shows 55%, 22%, 42% and 12% coefficient of determination with the regressed value, respectively. In this study, estimated mean predicted breeding value (kg) in BWT and 3WT, 6WT and GFY were 0.067, 0.008, 0.036 and -0.003, respectively. Estimates of genetic trends indicated that there was a positive genetic improvement in all studied traits and selection would be effective for the improvement of body weight traits and GFY of BM sheep.

78 FR 41794 - Agency Information Collection Activities OMB Responses

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... INFORMATION: OMB Responses To Agency Clearance Requests OMB Approvals EPA ICR Number 1981.05; Distribution of... Number 1160.12; NSPS/NESHAP for Wool Fiberglass Insulation Manufacturing Plants; 40 CFR part 60 subparts...

40 CFR 425.70 - Applicability; description of the shearling subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY Shearling... cured sheep or sheep-like skins with the wool or hair retained into finished leather by chrome tanning...

Plant a Planetary Pennant, and Other Art Projects

ERIC Educational Resources Information Center

Wilcox, Claudia; and others

1970-01-01

Art projects discussed include the creation of outer space flags, painting with wool, making ceramics and sculptures from inexpensive ingredients, constructing cardboard rockets, costume design, and reed representations of flowers and insects. (DB)

The sheep genome illuminates biology of the rumen and lipid metabolism.

PubMed

Jiang, Yu; Xie, Min; Chen, Wenbin; Talbot, Richard; Maddox, Jillian F; Faraut, Thomas; Wu, Chunhua; Muzny, Donna M; Li, Yuxiang; Zhang, Wenguang; Stanton, Jo-Ann; Brauning, Rudiger; Barris, Wesley C; Hourlier, Thibaut; Aken, Bronwen L; Searle, Stephen M J; Adelson, David L; Bian, Chao; Cam, Graham R; Chen, Yulin; Cheng, Shifeng; DeSilva, Udaya; Dixen, Karen; Dong, Yang; Fan, Guangyi; Franklin, Ian R; Fu, Shaoyin; Guan, Rui; Highland, Margaret A; Holder, Michael E; Huang, Guodong; Ingham, Aaron B; Jhangiani, Shalini N; Kalra, Divya; Kovar, Christie L; Lee, Sandra L; Liu, Weiqing; Liu, Xin; Lu, Changxin; Lv, Tian; Mathew, Tittu; McWilliam, Sean; Menzies, Moira; Pan, Shengkai; Robelin, David; Servin, Bertrand; Townley, David; Wang, Wenliang; Wei, Bin; White, Stephen N; Yang, Xinhua; Ye, Chen; Yue, Yaojing; Zeng, Peng; Zhou, Qing; Hansen, Jacob B; Kristensen, Karsten; Gibbs, Richard A; Flicek, Paul; Warkup, Christopher C; Jones, Huw E; Oddy, V Hutton; Nicholas, Frank W; McEwan, John C; Kijas, James; Wang, Jun; Worley, Kim C; Archibald, Alan L; Cockett, Noelle; Xu, Xun; Wang, Wen; Dalrymple, Brian P

2014-06-06

Sheep (Ovis aries) are a major source of meat, milk, and fiber in the form of wool and represent a distinct class of animals that have a specialized digestive organ, the rumen, that carries out the initial digestion of plant material. We have developed and analyzed a high-quality reference sheep genome and transcriptomes from 40 different tissues. We identified highly expressed genes encoding keratin cross-linking proteins associated with rumen evolution. We also identified genes involved in lipid metabolism that had been amplified and/or had altered tissue expression patterns. This may be in response to changes in the barrier lipids of the skin, an interaction between lipid metabolism and wool synthesis, and an increased role of volatile fatty acids in ruminants compared with nonruminant animals. Copyright © 2014, American Association for the Advancement of Science.

Enzyme processing of textiles in reverse micellar solution.

PubMed

Sawada, K; Ueda, M

2001-08-23

Scouring of cotton using pectinase enzyme, bioscouring, in reverse micellar system was studied. The effectiveness of bioscouring was evaluated by measuring weight loss of cotton, analyzing pectin and cotton wax remaining and by wetness testing. Pectinase enzyme showed excellent activity even in organic media, and the effectiveness of scouring was equivalent or better than that achieved by conventional alkaline process or bioscouring in aqueous media. Enzymatic modification of wool using protease enzyme in the same system was also studied. It has found that felting property and tensile strength of wool fabrics treated by protease in reverse micellar system were superior to those in aqueous media. Possibilities of utilization of the same system for the subsequent textile dyeing process were also investigated. It was found that cotton and polyester fabrics were dyed satisfactorily by reverse micellar system compared to conventional aqueous system.

Penetration, permeation, and resorption of 8-methoxypsoralen. Comperative in vitro and in vivo studies after topical application of four standard preparations.

PubMed

Kammerau, B; Klebe, U; Zesch, A; Schaefer, H

1976-03-10

The penetration, permeation, and resorption of radioactively labelled 8-Methoxypsoralen was investigated in human skin. Siultaneously, the effects to time and ointment carrier on the penetration kinetics were ascertained. The carriers tested were: vaseline, aqueous wool-wax alcohol ointment, aqueous hydrophilic ointment and polyethylene glycol ointment. The absolute concentrations of 8-Methoxypsoralen were estimated in the horny layer, epidermis and dermis. With the most advantageous carrier, aqueous wool-wax alcohol ointment, 4-6X10(-5) M and 10(-5) M were attained in the epidermis and dermis, respectively. Moreover, it was shown that the substance penetrates rapidly (10 min) into the epidermis and dermis and the high concentrations reached constant over a period of 16 h. Only with a formulation of aqueous wool-wax alcohols is any accumulation at all achieved in the deeper areas of the horny layer. A uniform decrease in drug concentration with increasing depth of the horny layer is found with the other 3 vehicles, whereby slight variations in concentrations pertain from carrier to carrier. 4 h after local application, 8-Methoxypsoralen can be detected in the urine. Regardless of the ointment base employed, 8-Methoxypsoralen is no longer detectable in the urine 40 h after application. In comparison to the oral therapy, the same magnitude of percutaneous resorption into the central compartment is to be derived from the data, if half the body surface is treated locally.

Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells

NASA Astrophysics Data System (ADS)

Sonawane, Jayesh M.; Patil, Sunil A.; Ghosh, Prakash C.; Adeloju, Samuel B.

2018-03-01

A conducting polymer coated stainless-steel wool (SS-W) is proposed for use as a low-cost anode for microbial fuel cells (MFCs). When coated with polyaniline (PANi) and polypyrrole (PPy), the pristine SS-W, SS/PANi-W and SS/PPy-W anodes produced maximum current densities of 0.30 ± 0.04, 0.67 ± 0.05, 0.56 ± 0.07 mA cm-2, respectively, in air-cathode MFCs. Also, based on achieved power density, both SS/PANi-W and SS/PPy-W achieved 0.288 ± 0.036 mW cm-2 and 0.187 ± 0.017 mW cm-2, respectively, which were superior to 0.127 ± 0.011 mW cm-2 obtained with pristine SS-W. Further, in comparison with SS-P based anodes, all SS-W based anodes gave improved power densities under similar experimental conditions by at least 70%. Moreover, the charge transfer resistance of the SS-W was much lower (240 ± 25 Ω cm-2) than for the SS-P (3192 ± 239 Ω cm-2). The j0(apparent) values obtained for SS/PANi-W (0.098 ± 0.007 mA cm-2) and SS/PPy-W (0.036 ± 0.004 mA cm-2) anodes were also much higher than that of the pristine SS-W (0.020 ± 0.005 mA cm-2), as well as than those of all SS-P based anodes. The observed enhancement of the bioelectrocatalytic performances were well supported by physicochemical and electrochemical characterisation.

Stable Water Use Efficiency of Tibetan Alpine Meadows in Past Half Century: Evidence from Wool δ13C Values

PubMed Central

Yang, Hao; He, Nianpeng; He, Yongtao; Li, Shenggong; Shi, Peili; Zhang, Xianzhou

2015-01-01

Understanding the influences of climatic changes on water use efficiency (WUE) of Tibetan alpine meadows is important for predicting their long-term net primary productivity (NPP) because they are considered very sensitive to climate change. Here, we collected wool materials produced from 1962 to 2010 and investigated the long-term WUE of an alpine meadow in Tibet on basis of the carbon isotope values of vegetation (δ 13Cveg). The values of δ 13Cveg decreased by 1.34‰ during 1962–2010, similar to changes in δ 13C values of atmospheric CO2. Carbon isotope discrimination was highly variable and no trend was apparent in the past half century. Intrinsic water use efficiency (W i) increased by 18 μmol·mol–1 (approximately 23.5%) during 1962–2010 because the increase in the intercellular CO2 concentration (46 μmol·mol–1) was less than that in the atmospheric CO2 concentration (C a, 73 μmol·mol–1). In addition, W i increased significantly with increasing growing season temperature and C a. However, effective water use efficiency (W e) remained relatively stable, because of increasing vapor pressure deficit. C a, precipitation, and growing season temperature collectively explained 45% of the variation of W e. Our findings indicate that the W e of alpine meadows in the Tibetan Plateau remained relatively stable by physiological adjustment to elevated C a and growing season temperature. These findings improve our understanding and the capacity to predict NPP of these ecosystems under global change scenarios. PMID:26660306

Surface active complexes formed between keratin polypeptides and ionic surfactants.

PubMed

Pan, Fang; Lu, Zhiming; Tucker, Ian; Hosking, Sarah; Petkov, Jordan; Lu, Jian R

2016-12-15

Keratins are a group of important proteins in skin and hair and as biomaterials they can provide desirable properties such as strength, biocompatibility, and moisture regaining and retaining. The aim of this work is to develop water-soluble keratin polypeptides from sheep wool and then explore how their surface adsorption behaves with and without surfactants. Successful preparation of keratin samples was demonstrated by identification of the key components from gel electrophoresis and the reproducible production of gram scale samples with and without SDS (sodium dodecylsulphate) during wool fibre dissolution. SDS micelles could reduce the formation of disulphide bonds between keratins during extraction, reducing inter-molecular crosslinking and improving keratin polypeptide solubility. However, Zeta potential measurements of the two polypeptide batches demonstrated almost identical pH dependent surface charge distributions with isoelectric points around pH 3.5, showing complete removal of SDS during purification by dialysis. In spite of different solubility from the two batches of keratin samples prepared, very similar adsorption and aggregation behavior was revealed from surface tension measurements and dynamic light scattering. Mixing of keratin polypeptides with SDS and C 12 TAB (dodecyltrimethylammonium bromide) led to the formation of keratin-surfactant complexes that were substantially more effective at reducing surface tension than the polypeptides alone, showing great promise in the delivery of keratin polypeptides via the surface active complexes. Neutron reflection measurements revealed the coexistence of surfactant and keratin polypeptides at the interface, thus providing the structural support to the observed surface tension changes associated with the formation of the surface active complexes. Copyright © 2016. Published by Elsevier Inc.

Degradation and ecotoxicity of dye Reactive Black 5 after reductive-oxidative process : Environmental Science and Pollution Research.

PubMed

Cuervo Lumbaque, Elisabeth; Gomes, Monike Felipe; Da Silva Carvalho, Vanessa; de Freitas, Adriane Martins; Tiburtius, Elaine Regina Lopes

2017-03-01

This research paper describes the study of a reduction-oxidation system using commercial steel wool (Fe 0 ) and H 2 O 2 for degradation of the dye Reactive Black 5 and aromatic compounds in water. The reductive process alone allowed the almost complete removal of color (97 ± 1 %) after 60 min of reaction. The decrease in spectral area (λ = 599 nm) associated with the chromophore group indicates breakage of the azo bonds. Moreover, the significant change in UV spectra can be associated with the formation of aromatic amines. Regarding the transformation products, a spectrophotometric method based on the diazotization reaction was employed to identify aromatic amines after reductive process, using sulfanilic acid as a model of aromatic amines. In addition, association with Fenton reagents improved the efficiency in the system with 93 ± 1 % degradation of intermediates formed during the reductive process. Ecotoxicological analysis revealed that the dye solution, after the reductive and oxidative processes, was not toxic to Lactuca sativa seeds. For Daphnia magna, the EC 50 (%) values observed revealed that dye solution has an EC 50 (%) = 74.1 and after reductive process, the toxicity increased (EC 50 (%) = 63.5), which might be related to the formation of aromatic amines. However, after the Fenton process, the EC 50 (%) was >100. These results demonstrated that the Fenton reaction using steel wool as an iron source was very efficient to decrease color, aromatic transformation products, and the ecotoxicity of Reactive Black 5 in solution.

40 CFR 60.296 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., g/kg. cs=concentration of particulate matter, g/dsm. Qsd=volumetric flow rate, dscm/hr. A=zero... (borosilicate) glass, wool fiberglass, and flat glass. P=glass production rate, kg/hr. (2) Method 5 shall be...

16 CFR 303.1 - Terms defined.

Code of Federal Regulations, 2011 CFR

2011-01-01

... covering to which the pile, face, or outer surface is woven, tufted, hooked, knitted, or otherwise attached..., knitted, or felted into a wool product which, after having been used in any way by the ultimate consumer...

7 CFR 1421.4 - Eligible producers.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., or sharecropper, or in the case of rice, furnishes land, labor, water, or equipment for a share of the rice crop. With respect to wool and mohair, the producer must own, other than through a security...

7 CFR 1421.4 - Eligible producers.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., or sharecropper, or in the case of rice, furnishes land, labor, water, or equipment for a share of the rice crop. With respect to wool and mohair, the producer must own, other than through a security...

7 CFR 1421.4 - Eligible producers.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., or sharecropper, or in the case of rice, furnishes land, labor, water, or equipment for a share of the rice crop. With respect to wool and mohair, the producer must own, other than through a security...

Presidential Green Chemistry Challenge: 2013 Academic Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2013 award winner, Prof Richard P. Wool of the University of Delaware, created high-performance materials using vegetable oils, feathers, and flax. Can be used as adhesives, composites, foams, and circuit boards.

7 CFR 63.100 - Establishment and membership.

Code of Federal Regulations, 2011 CFR

2011-01-01

...: (a) Voting members. (1) Four members shall be active producers of sheep or goats in the United States... expertise in lamb, wool, goat, or goat product marketing. (b) Non-voting members. (1) One member shall be...

48 CFR 225.7002-2 - Exceptions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of the Army. (iii) The Secretary of the Navy. (iv) The Secretary of the Air Force. (v) The Director... simplified acquisition threshold. (k) Acquisitions of waste and byproducts of cotton or wool fiber for use in...

48 CFR 225.7002-2 - Exceptions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of the Army. (iii) The Secretary of the Navy. (iv) The Secretary of the Air Force. (v) The Director... simplified acquisition threshold. (k) Acquisitions of waste and byproducts of cotton or wool fiber for use in...

48 CFR 225.7002-2 - Exceptions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of the Army. (iii) The Secretary of the Navy. (iv) The Secretary of the Air Force. (v) The Director... simplified acquisition threshold. (k) Acquisitions of waste and byproducts of cotton or wool fiber for use in...

48 CFR 225.7002-2 - Exceptions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of the Army. (iii) The Secretary of the Navy. (iv) The Secretary of the Air Force. (v) The Director... simplified acquisition threshold. (k) Acquisitions of waste and byproducts of cotton or wool fiber for use in...

Infrared spectroscopic investigations on the distribution of residual grease on textiles

NASA Astrophysics Data System (ADS)

Siedler, J.; Schumacher-Hamedat, Ursula; Hoecker, Hartwig

1992-03-01

Surface modification of textile materials is of major importance in the modern textile industry. Several methods are commonly applied to produce a broad range of coated materials. The adhesion between the coating polymers and the textile fibers often determines the quality. Improved adhesion of the coating is achieved by a chemical bonding (covalent or ionic) between the coating materials and the textile. The efficiency,however, is dependent on the orientation of the functional groups of the outmost molecular layers of the fibers. Therefore, we have used surface sensitive methods to analyze the surface structure of proteinaceous fibers. Homopoly(aminoacid) films like poly(-(gamma) -benzyl-L-glutamate) and poly(- (Beta) -benzyl-L-aspartate) have been chosen as models for natural fibers like wool.

Lead-acid battery construction

NASA Technical Reports Server (NTRS)

Rowlette, John J. (Inventor)

1988-01-01

The power characteristics of a lead-acid battery are improved by incorporating a dispersion of 1 to 10% by weight of a thermodynamically stable conductivity additive, such as conductive tin oxide coated glass fibers (34) of filamentary glass wool (42) in the positive active layer (32) carried on the grid (30) of the positive plate (16). The avoiding of positive plate reversal to prevent reduction of the tin oxide is accomplished by (a) employing an oversized positive plate and pre-charging it; (b) by pre-discharging the negative plate; and/or (c) by placing a circuit breaker (26) in combination with the plates (16, 18) and terminals (22, 24) to remove the load when the voltage of the positive plate falls below a pre-selected level.

Immobilization of bacterial proteases on water-solved polymer by means of electron beam

NASA Astrophysics Data System (ADS)

Gonchar, A. M.; Auslender, V. L.

1996-12-01

Possibility of electron beam usage for proteases' immobilization on 1,4-polyalkylene oxide (1,4-PAO) was studied to obtain biologically active complex for multi-purpose usage. It is shown that immobilization of Bacillus Subtilis protease takes place due to free-radical linking of enzyme and carrier with formation of mycellium-like structures. Immobilization improves heat resistance of enzyme up to 60°C without substrate and up to 80°C in presence of substrate, widens range of pH activity in comparison with non-immobilized forms. Immobilized proteases do not contain peroxides or long-live radicals. Our results permitted to create technologies for production of medical and veterinary preparations, active components for wool washing agents and leather fabrication technology.

Modeling of Biomaterials for Non-Linear Optical Applications.

DTIC Science & Technology

1995-01-01

Computational chemistry methods were used to explore the molecular conformations of a variety of optoelectronic biopolymers -spiropyran chromophore...investigated. These polypeptides are compositionally representative of the naturally occurring amino acid sequences in silk and wool, having respectively

Citrus, Wool, and Cotton Trust Fund Act of 2012

THOMAS, 112th Congress

Sen. Baucus, Max [D-MT

2012-09-19

Senate - 09/20/2012 By Senator Baucus from Committee on Finance filed written report. Report No. 112-227. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

16 CFR 300.18 - Use of name of specialty fiber.

Code of Federal Regulations, 2013 CFR

2013-01-01

... designation permitted under this rule: 55% Alpaca—45% Camel Hair 50% Recycled Camel Hair—50% Wool 60% Recycled Alpaca—40% Rayon 35% Recycled Llama—35% Recycled Vicuna—30% Cotton 60% Cotton—40% Recycled Llama. (b...

16 CFR 300.18 - Use of name of specialty fiber.

Code of Federal Regulations, 2014 CFR

2014-01-01

... designation permitted under this rule: 55% Alpaca—45% Camel Hair 50% Recycled Camel Hair—50% Wool 60% Recycled Alpaca—40% Rayon 35% Recycled Llama—35% Recycled Vicuna—30% Cotton 60% Cotton—40% Recycled Llama. (b...

16 CFR 300.18 - Use of name of specialty fiber.

Code of Federal Regulations, 2010 CFR

2010-01-01

... designation permitted under this rule: 55% Alpaca—45% Camel Hair 50% Recycled Camel Hair—50% Wool 60% Recycled Alpaca—40% Rayon 35% Recycled Llama—35% Recycled Vicuna—30% Cotton 60% Cotton—40% Recycled Llama. (b...

16 CFR 300.18 - Use of name of specialty fiber.

Code of Federal Regulations, 2012 CFR

2012-01-01

... designation permitted under this rule: 55% Alpaca—45% Camel Hair 50% Recycled Camel Hair—50% Wool 60% Recycled Alpaca—40% Rayon 35% Recycled Llama—35% Recycled Vicuna—30% Cotton 60% Cotton—40% Recycled Llama. (b...

Experimental Study on the Fire Performance of Tubular Steel Columns with Membrane Protections for Prefabricated and Modular Steel Construction

PubMed Central

Zhang, Xin; Peng, Lei; Ni, Zhao-peng; Ni, Tian-xiao; Huang, Yi-liang; Zhou, Yang

2018-01-01

Experimental research was conducted to study the fire resistance of steel tubular columns used in prefabricated and modular construction. In order to achieve high-efficient prefabrication and fast on-site installation, membrane protections using board products and thermal insulation blankets are adopted as the favorable protection method. Three protected tubular columns were tested in a full-scale column furnace with axial load applied. The study variables were different membranes, including fiber reinforced calcium silicate (FRCS) boards, rock wool and aluminum silica (Fiberfrax) insulations. The results suggest that one layer of 12 mm FRCS board with rock wool insulation has insufficient fire protection. However, steel columns protected with two layers of 12 mm FRCS boards with insulation appeared to have good fire resistances and could achieve a fire resistance rating as high as 2.5~3.0 h. PMID:29547574

Outcome of retinopathy in chronic hepatitis C patients treated with peginterferon and ribavirin.

PubMed

Mehta, Nilesh; Murthy, Uma K; Kaul, Vivek; Alpert, Samuel; Abruzzese, Gerald; Teitelbaum, Charles

2010-02-01

The purpose of this study is to evaluate the incidence and outcome of retinopathy in chronic hepatitis C patients treated with peginterferon and ribavirin. A total of 74 hepatitis C patients with baseline eye exams and eye exams during therapy were included. Retinopathy was defined as development of cotton wool spots and/or intra-retinal hemorrhage. Demographics, hepatitis C viral characteristics, treatment and laboratory data, and eye exam findings were compared in groups with and without retinopathy. Retinopathy developed in 28 (38%), early in therapy. Pre-treatment eye exams did not predict risk of retinopathy. Therapy was continued in all but one; cotton wool spots resolved in 24 of 26. All nine patients with intra-retinal hemorrhage had resolution. No patient had retinopathy-related visual deterioration. Retinopathy is common with peginterferon therapy, but the outcome is favorable. Cessation of therapy for retinopathy is not warranted. Severe visual disturbances and scotomas deserve further evaluation.

Cleaning of Fire Damaged Watercolor and Textiles Using Atomic Oxygen

NASA Technical Reports Server (NTRS)

Rutledge, Sharon K.; Banks, Bruce A.; Chichernea, Virgil A.; Haytas, Christy A.

2000-01-01

A noncontact technique is described that uses atomic oxygen generated under low pressure in the presence of nitrogen to remove soot from the surface of a test watercolor panel and strips of cotton, wool and silk. The process, which involves surface oxidation, permits control of the amount of surface material removed. The effectiveness of soot removal from test panels of six basic watercolors (alizarin crimson, burnt sienna, lemon yellow, yellow ochre, cerulean blue and ultramarine blue) and strips of colored cotton, wool and silk was measured using reflectance spectroscopy. The atomic oxygen removed soot effectively from the treated areas and enabled partial recovery of charred watercolors. However, overexposure can result in removal of sizing, bleaching, and weakening of the structure. With the proper precautions, atomic oxygen treatment appears to have great potential to salvage heavily smoke damaged artworks which were previously considered unrestorable.

Thermogravimetric characteristics of typical municipal solid waste fractions during co-pyrolysis.

PubMed

Zhou, Hui; Long, YanQiu; Meng, AiHong; Li, QingHai; Zhang, YanGuo

2015-04-01

The interactions of nine typical municipal solid waste (MSW) fractions during pyrolysis were investigated using the thermogravimetric analyzer (TGA). To compare the mixture results with the calculation results of superposition of single fractions quantitatively, TG overlap ratio was introduced. There were strong interactions between orange peel and rice (overlap ratio 0.9736), and rice and poplar wood (overlap ratio 0.9774). The interactions of mixture experiments postponed the peak and lowered the peak value. Intense interactions between PVC and rice, poplar wood, tissue paper, wool, terylene, and rubber powder during co-pyrolysis were observed, and the pyrolysis at low temperature was usually promoted. The residue yield was increased when PVC was blended with rice, poplar wood, tissue paper, or rubber powder; while the residue yield was decreased when PVC was blended with wool. Copyright © 2014 Elsevier Ltd. All rights reserved.

Coat color determination by miR-137 mediated down-regulation of microphthalmia-associated transcription factor in a mouse model

PubMed Central

Dong, Changsheng; Wang, Haidong; Xue, Linli; Dong, Yanjun; Yang, Lei; Fan, Ruiwen; Yu, Xiuju; Tian, Xue; Ma, Shuhui; Smith, George W.

2012-01-01

Coat color is a key economic trait in wool-producing species. Color development and pigmentation are controlled by complex mechanisms in animals. Here, we report the first production of an altered coat color by overexpression of miR-137 in transgenic mice. Transgenic mice overexpressing miR-137 developed a range of coat color changes from dark black to light color. Molecular analyses of the transgenic mice showed decreased expression of the major target gene termed MITF and its downstream genes, including TYR, TYRP1, and TYRP2. We also showed that melanogenesis altered by miR-137 is distinct from that affected by UV radiation in transgenic mice. Our study provides the first mouse model for the study of coat color controlled by miRNAs in animals and may have important applications in wool production. PMID:22847819

Real evaporative cooling efficiency of one-layer tight-fitting sportswear in a hot environment.

PubMed

Wang, F; Annaheim, S; Morrissey, M; Rossi, R M

2014-06-01

Real evaporative cooling efficiency, the ratio of real evaporative heat loss to evaporative cooling potential, is an important parameter to characterize the real cooling benefit for the human body. Previous studies on protective clothing showed that the cooling efficiency decreases with increasing distance between the evaporation locations and the human skin. However, it is still unclear how evaporative cooling efficiency decreases as the moisture is transported from the skin to the clothing layer. In this study, we performed experiments with a sweating torso manikin to mimic three different phases of moisture absorption in one-layer tight-fitting sportswear. Clothing materials Coolmax(®) (CM; INVISTA, Wichita, Kansas, USA; 100%, profiled cross-section polyester fiber), merino wool (MW; 100%), sports wool (SW; 50% wool, 50% polyester), and cotton (CO; 100%) were selected for the study. The results demonstrated that, for the sportswear materials tested, the real evaporative cooling efficiency linearly decreases with the increasing ratio of moisture being transported away from skin surface to clothing layer (adjusted R(2) >0.97). In addition, clothing fabric thickness has a negative effect on the real evaporative cooling efficiency. Clothing CM and SW showed a good ability in maintaining evaporative cooling efficiency. In contrast, clothing MW made from thicker fabric had the worst performance in maintaining evaporative cooling efficiency. It is thus suggested that thin fabric materials such as CM and SW should be used to manufacture one-layer tight-fitting sportswear. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Volcanic emissions from soils at the base of La Fossa volcano, Vulcano island, Italy

NASA Astrophysics Data System (ADS)

Obenholzner, J. H.; Parks, J. L.

2006-12-01

A top-sealed plastic tube with a diameter of ca. 15 cm had been buried vertically at the base of La Fossa volcano, Volcano island, Italy, next to the front of the obsidian flow. The tube had been filled with quartz wool to condense vapors emanating from the soil. At ca. 75 cm below the surface the sample had been exposed to vapors from Sept. 2005 to April 2006. The leached sample had not been in touch with the ground. Another glass wool cushion (ca. 3 cm thick) had been underneath to minimize capillary effects. Leaching of the quartz wool and ICP-MS analysis documented positive values for: Mg, Al, Si, P, K, Ca, Cr, Mn, Ni, Cu, Zn, Cd, Sn, Pb. Leaching with nitric acid documented also V and Fe. Acid leaching produced higher values for all elements, except K and Sn, than leaching with deionized water. Negative values had been obtained for As, Se, Mo. Influence from soil breathing can be excluded as the active fumaroles contain As and Se. This experiment documents for the first time an unknown element transport by vapors/gases through a volcanic edifice interacting with hydrothermal and magmatic gases. It remains unknown if elements detected are entering the atmosphere or are getting adsorbed onto the volcanic ash soil particles derived from reworked surge beds. This question is very important as soils might be an unknown filter medium to filter volcanically polluted air in case of major volcanic crises. Data can be obtained from the authors.

Biopersistence of man-made vitreous fibers and crocidolite asbestos in the rat lung following inhalation.

PubMed

Hesterberg, T W; Miiller, W C; Musselman, R P; Kamstrup, O; Hamilton, R D; Thevenaz, P

1996-02-01

This study investigated possible relationships between fiber bio-persistence in the lung and previously observed differences in pulmonary toxicity between asbestos and man-made vitreous fibers (MMVF) following inhalation exposure. Fischer 344/N rats were exposed nose only, 6 hr/day for 5 days to 30 mg/m3 MMVF (two fiberglass compositions, rock wool, or slag wool) or to 10 mg/m3 crocidolite asbestos. At eight time points up to 1 year postexposure, lung fiber burdens were analyzed for number/lung and bivariate dimensions using scanning electron microscopy (SEM) and for chemical composition using SEM energy dispersive spectroscopy. After 365 days, > 95% of long (> 20 microns) MMVFs had disappeared from the lung compared to only 17% of long crocidolite fibers. Longer MMVFs disappeared more rapidly than short MMVFs, suggesting that long fibers were dissolving or breaking. Mean diameters and lengths of the MMVFs decreased with time, while the mean diameter of crocidolite remained unchanged and its mean length showed an apparent increase, probably related to macrophage-mediated clearance of short fibers. Leaching of oxides occurred in the fibrous glasses and slag wool and correlated with morphological changes in the fibers over time. No chemical or morphological changes were observed in crocidolite fibers. These changes in MMVF number, chemistry, and morphology over time in lung tissue compared to crocidolite asbestos demonstrate the relatively low biological persistence of some MMVFs in the lung and may explain why these MMVFs are not tumorigenic in rats, even after chronic exposure at high concentrations.

16 CFR 1610.61 - Reasonable and representative testing to assure compliance with the standard for the clothing...

Code of Federal Regulations, 2011 CFR

2011-01-01

..., olefin, polyester, wool, or any combination of these fibers, regardless of weight.) If no exemptions... sweaters; polyester/cotton and 100% cotton fleece/sherpa garments, and 100% cotton terry cloth robes...

75 FR 50695 - Dominican Republic-Central America-United States Free Trade Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-17

... made from wool fabric are not subject to these limits: men's and boys' and women's and girls' suits, trousers, suit-type jackets and blazers and vests and women's and girls' skirts, provided that such goods...

25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

Code of Federal Regulations, 2012 CFR

2012-04-01

..., including, but not limited to, cornhusk, raffia, tule, horsehair, cotton, wool, fiber, linen, rabbit skin..., star quilts, pictorial appliqué wall hangings, fiber woven bags, embroidered dance shawls, rabbit skin...

25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

Code of Federal Regulations, 2013 CFR

2013-04-01

..., including, but not limited to, cornhusk, raffia, tule, horsehair, cotton, wool, fiber, linen, rabbit skin..., star quilts, pictorial appliqué wall hangings, fiber woven bags, embroidered dance shawls, rabbit skin...

25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

Code of Federal Regulations, 2014 CFR

2014-04-01

..., including, but not limited to, cornhusk, raffia, tule, horsehair, cotton, wool, fiber, linen, rabbit skin..., star quilts, pictorial appliqué wall hangings, fiber woven bags, embroidered dance shawls, rabbit skin...

Pre-Flight Advanced Clothing Study

NASA Technical Reports Server (NTRS)

Orndoff, Evelyne; Poritz, Darwin; Schlesinger, Thilini; Byme, Vicky

2014-01-01

All human space missions require significant logistical mass and volume that will become an excessive burden for long duration missions beyond low Earth orbit. The current International Space Station (ISS) crew wardrobe has already evolved not only to reduce some of the logistical burden but also to address crew preference. The present study was undertaken to find ways further to reduce this logistical burden while examining human response to different types of clothes. The primary objective of the study is to measure how long people can wear the same exercise garment, depending on the type of fabric and the presence of antimicrobial treatment. The secondary objective is to assess the reasons for length of wear from perceptions of clothing characteristics, including nine ordinal scales. Cardiovascular exercise was chosen as the activity in this experiment for its profuse sweating effect and because it is considered a more severe treatment applied to the clothes than every-day usage. Study garments were exercise T-shirts and shorts purchased from various vendors. Fabric construction, fabric composition, and finishing treatment were defined as the key variables. A web-based questionnaire was used for self-reported data collection. The study was divided in three balanced experiments: a cotton-polyester-wool (CPW) T-shirts study with 61 participants, a polyester-modacrylic-polyester/cocona (PMC) T-shirts study with 40 participants, and a shorts study with 70 participants. In the CPW study, the T-shirts were made of 100% cotton, or of 100% polyester or of 100% wool, and categorized into open and tight knit constructions. In the PMC study, the T-shirts were made of 100% polyester, or of 82% modacrylic, or of 95% polyester with 5% cocona fiber, without construction distinction. The shorts were made either of 100% cotton or of 100% polyester, and were knitted or woven. Some garments were treated with Bio-Protect 500 antimicrobial finish according the experimental design. The data collected from the questionnaire included garment identification, level of exertion, duration of exercise session, number of exercise sessions, an ordinal preference scale for nine sensory elements, and reason for retiring a used garment. From the analysis of the combined CPW and PMC shirt studies, there are statistically significant differences among the mean lifetimes of various types of shirts. The exercise shirts with the longest mean lifetimes are untreated wool (600 minutes), treated cotton (526 minutes), and untreated modacrylic (515 minutes). From the combined CPW and PMC shirt studies, the most preferred material was untreated open-knit wool, which is one of the two materials that jointly were worn the longest, untreated wool, both open-knit and tight-knit. For the CP shorts study, there were no statistically significant differences in mean lifetimes of the exercise shorts at the 5% significance level due to the treatment combinations. There was therefore no justification to examine differences among levels of main effects or interactions. The preference for shorts was in this order: untreated woven polyester, untreated knitted polyester, untreated woven cotton, and treated knitted cotton.The nine preference scales were tabulated to determine the preference responses at the end of those exercise periods which were prior to the period when a garment was retired and a new garment was started. The assumption is that an unfavorable assessment of a garment leads to its retirement. The scent scale response was predominantly unfavorable at the end of the exercise period immediately prior to the exercise period when a new garment was started. Additional work on wool clothing is needed to assess if this material can be part of a crew wardrobe for long duration missions. The results of this study informed the choice of fabrics for an upcoming ISS intra-vehicular clothing study.

Asia Lakes

Atmospheric Science Data Center

2013-04-16

... of oil were expanded in 2000. Important industries include coal mining and the production of food and wool. The region is also of ... interest; a large mammoth skeleton excavated from one of the coal mines near Manzhouli is on display at the Inner Mongolia Museum in Huhhot, ...

15 CFR 335.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Definitions. 335.2 Section 335.2 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS IMPORTS OF WORSTED WOOL FABRIC...

40 CFR 63.1196 - What definitions should I be aware of?

Code of Federal Regulations, 2012 CFR

2012-07-01

... form mineral wool. Curing oven means a chamber in which heat is used to thermoset a binder on the... slag. It may be used as a thermal or acoustical insulation material or in the making of other products...

40 CFR 63.1196 - What definitions should I be aware of?

Code of Federal Regulations, 2013 CFR

2013-07-01

... form mineral wool. Curing oven means a chamber in which heat is used to thermoset a binder on the... slag. It may be used as a thermal or acoustical insulation material or in the making of other products...

40 CFR 63.1196 - What definitions should I be aware of?

Code of Federal Regulations, 2014 CFR

2014-07-01

... form mineral wool. Curing oven means a chamber in which heat is used to thermoset a binder on the... slag. It may be used as a thermal or acoustical insulation material or in the making of other products...

7 CFR 31.401 - Cost of samples for wool grades.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER...: $22 each, delivered to any destination within the United States and $24 each, delivered to any...

50 CFR 622.40 - Limitations on traps and pots.

Code of Federal Regulations, 2012 CFR

2012-10-01

... limited to tyre palm, hemp, jute, cotton, wool, or silk. (B) Ungalvanized or uncoated iron wire with a... plastic, used or possessed in the EEZ, must have a minimum mesh size of 2.0 inches (5.1 cm) in the...

77 FR 42971 - Airworthiness Directives; Various Restricted Category Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... specifies replacing any mast with a crack, pitting, or corrosion beyond surface rust that is removed with a... rust with a wire brush or steel wool. [GRAPHIC] [TIFF OMITTED] TR23JY12.003 (2) If there is a crack...

19 CFR 132.18 - License for certain worsted wool fabric subject to tariff-rate quota.

Code of Federal Regulations, 2014 CFR

2014-04-01

... consumption (Customs Form 7501, column 34), or its electronic equivalent (see paragraph (c)(1) of this section... suits, suit-type jackets, or trousers, as required under these subheadings. (c) Validity of license—(1...

19 CFR 132.18 - License for certain worsted wool fabric subject to tariff-rate quota.

Code of Federal Regulations, 2013 CFR

2013-04-01

... consumption (Customs Form 7501, column 34), or its electronic equivalent (see paragraph (c)(1) of this section... suits, suit-type jackets, or trousers, as required under these subheadings. (c) Validity of license—(1...

19 CFR 132.18 - License for certain worsted wool fabric subject to tariff-rate quota.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consumption (Customs Form 7501, column 34), or its electronic equivalent (see paragraph (c)(1) of this section... suits, suit-type jackets, or trousers, as required under these subheadings. (c) Validity of license—(1...

19 CFR 132.18 - License for certain worsted wool fabric subject to tariff-rate quota.

Code of Federal Regulations, 2012 CFR

2012-04-01

... consumption (Customs Form 7501, column 34), or its electronic equivalent (see paragraph (c)(1) of this section... suits, suit-type jackets, or trousers, as required under these subheadings. (c) Validity of license—(1...

19 CFR 132.18 - License for certain worsted wool fabric subject to tariff-rate quota.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consumption (Customs Form 7501, column 34), or its electronic equivalent (see paragraph (c)(1) of this section... suits, suit-type jackets, or trousers, as required under these subheadings. (c) Validity of license—(1...

[Investigation of fibrous cultural materials by infrared spectroscopy].

PubMed

Luo, Xi-yun; Du, Yi-ping; Shen, Mei-hua; Zhang, Wen-qing; Zhou, Xin-guang; Fang, Shu-ying; Zhang, Xuan

2015-01-01

Cultural fibrous material includes both important categories, i. e. textile and paper, consisting of precious cultural materials in museum, such as costume, painting, and manuscript. In recent years more and more connoisseur and conservator's concerns are, through nondestructive method, the authenticity and the ageing identification of these cultural relics especially made from fragile materials. In this research, we used attenuated total reflection infrared spectroscopy to identify five traditional textile fibers, alongside cotton, linen, wool, mulberry silk and tussah silk, and another five paper fibers alongside straw, wheat straw, long qisong, Chinese alpine rush and mulberry bar, which are commonly used for making Chinese traditional xuan paper. The research result showed that the animal fiber (wool, mulberry silk and tussah silk) and plant fiber (cotton and linen) were easier to be distinguished by comparing the peaks at 3 280 cm-1 belonging to NH stretching vibration and a serious peaks related to amide I to amide III. In the spectrum of wool, the peak at 1 076 cm-1 was assigned to the S-O stretching vibration absorption of cystine in wool structure and can be used to tell wool from silk. The spectrum of mulberry silk and tussah silk seems somewhat difficult to be identified, as well as the spectrum of cotton and linen. Five rural paper fibers all have obvious characteristic peaks at 3 330, 2 900 cm-1 which are related to OH and CH stretching vibration. In the fingerprint wavenumber range of 1 600 - 800 cm, the similar peaks also appeared at 1 370, 1 320 cm-1 and 1 162, 1 050 cm-1, both group peaks respectively are related to CH and CO vibration in the structure of cellulose and hemicellulose in paper fibers. Although there is more similarity of the infrared spectroscopy of these 5 paper fibers, some tiny difference in absorbance also can be found at 3 300 cm-1 and in the fingerprint range at 1 332, 1 203, and 1 050 cm-1 which are related to C-O-C vibration in cellulose. Moreover, in order to explore direct and simple method to identify different materials with similar spectrum,. the principal component analysis (PCA) was applied to separate cotton and linen, mulberry silk and tussah silk, as well as five paper fibers. To eliminate and reduce the spectral scattering caused by sample uneven surface roughness, the multiplicative scatter correction (MSC) has been applied based on total spectral data. The result showed that the score plot using the first two principal components can effectively categorize both group textiles of cotton and linen, as well as mulberry silk and tussah silk, and they have similar chemical structure. For five paper fibers, the PCA was applied in different spectral range (918-550, 1 280-918, 1 700-1 280 and 3 800-2 800 cm-1), and the best result appeared in the range from 3 800 to 2 800 cm-1, in which the five paper fibers can be well categorized. This research showed that infrared spectroscopy combined with principal component analysis has great potential advantage on identifying fibrous materials with similar structure.

40 CFR 63.1381 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... fiberglass to which a phenol-formaldehyde binder has been applied. Building insulation means bonded wool fiberglass insulation, having a loss on ignition of less than 8 percent and a density of less than 32... includes foundations, superstructure and retaining walls, raw material charger systems, heat exchangers...

40 CFR 63.1381 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... fiberglass to which a phenol-formaldehyde binder has been applied. Building insulation means bonded wool fiberglass insulation, having a loss on ignition of less than 8 percent and a density of less than 32... includes foundations, superstructure and retaining walls, raw material charger systems, heat exchangers...

40 CFR 63.1381 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... fiberglass to which a phenol-formaldehyde binder has been applied. Building insulation means bonded wool fiberglass insulation, having a loss on ignition of less than 8 percent and a density of less than 32... includes foundations, superstructure and retaining walls, raw material charger systems, heat exchangers...

7 CFR 31.402 - Cost of samples for wool top grades.

Code of Federal Regulations, 2010 CFR

2010-01-01

....402 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER... set: $42 each, delivered to any destination within the United States and $44 each, delivered to any...

SOURCE OF PRODUCTS OF NUCLEAR FISSION

DOEpatents

Harteck, P.; Dondes, S.

1960-03-15

A source of fission product recoil energy suitable for use in radiation chemistry is reported. The source consists of thermal neutron irradiated glass wool having a diameter of 1 to 5 microns and containing an isotope fissionable by thermal neutrons, such as U/sup 235/.

Effect of test conditions on relative toxicity rankings of fifteen materials

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.

1977-01-01

Fifteen materials were evaluated for relative toxicity of pyrolysis effluents, using different test conditions in the USF methodology. Wool fabrics were consistently among the most toxic materials, and polystyrene and polychloroprene flexible foam were consistently among the least toxic materials.

Fabrics for fire resistant passenger seats in aircraft

NASA Technical Reports Server (NTRS)

Tesoro, G. C.

1978-01-01

The essential elements of the problem and of approaches to improved fire resistance in aircraft seats are reviewed. The performance requirements and availability of materials, delay in the ignition of upholstery fabric by a small source are considered a realistic objective. Results of experimental studies on the thermal response of fabrics and fabric/foam combinations suggest significant conclusions regarding: (1) the ignition behavior of a commercial 90/10 wool/nylon upholstery fabric relative to fabrics made from thermally stable polymers; (2) the role of the foam backing; (3) the behavior of seams. These results, coupled with data from other sources, also confirm the importance of materials' interactions in multicomponent assemblies, and the need for system testing prior to materials' selection. The use of an interlinear or thermal barrier between upholstery fabric and foam is a promising and viable approach to improved fire resistance of the seat assembly, but experimental evaluation of specific combinations of materials or systems is an essential part of the selection process.

Helicopter internal noise reduction research and development application to the SA 360 and SA 365 Dauphin

NASA Technical Reports Server (NTRS)

Marze, H. J.; Dambra, F.

1978-01-01

Noise sources inside helicopter cabins are considered with emphasis on the mechanisms of vibration generation inside the main gear box and mechanisms of transmission between source and cabin. The dynamic behavior of the main gear box components is examined in relation to the transfer of vibration energy to the structure. It is indicated that although improvements can be made in noise reduction at the source, a soundproofing treatment isolating the passenger from the noise source is necessary. Soundproofing treatments installed and optimized include: (1) an acoustic screen using the weight effect to isolate the passenger from the noise source; (2) a damping treatment to limit the conversion of the vibratory energy into acoustic energy; and (3) an absorbing treatment achieved either through HELMHOLTZ resonators or through a glass wool blanket to limit the propagation of acoustic waves and the wave reflection effects in the cabin. The application of treatments at the source and the optimization of the sound barriers improved the noise level by about 30 db.

SUPERFICIAL AND DEEP CAPILLARY ISCHEMIA AS A PRESENTING SIGN OF RETINAL VASCULOPATHY WITH CEREBRAL LEUKOENCEPHALOPATHY AND SYSTEMIC MANIFESTATIONS.

PubMed

Nagiel, Aaron; Lalane, Robert A; Jen, Joanna C; Kreiger, Allan E

2017-10-12

The aim of this study was to investigate the presenting sign of retinal vasculopathy with cerebral leukoencephalopathy and systemic manifestations, a rare autosomal dominant condition caused by mutations in the TREX1 gene, and to explore the potential efficacy of bevacizumab in preventing capillary occlusions. Observational case report with the use of ultra-widefield fluorescein angiography, optical coherence tomography, and optical coherence tomography angiography. A 31-year-old man with a family history of retinal vasculopathy with cerebral leukoencephalopathy and systemic manifestations presented with a scotoma in his left eye. The visual acuity was 20/20 in both eyes, and his examination was notable for scattered cotton wool spots in the retina of both eyes as well as an area of paracentral acute middle maculopathy in the left eye. Ultra-widefield fluorescein angiography revealed peripheral capillary nonperfusion and vascular leakage corresponding to the cotton wool spots. Spectral domain optical coherence tomography and optical coherence tomography angiography confirmed the presence and distribution of superficial capillary plexus and deep capillary plexus ischemia. Neurologic examination and imaging were normal. A trial of monthly intravitreal bevacizumab injections to the left eye over 6 months resulted in diminished capillary leakage. Retinal vasculopathy with cerebral leukoencephalopathy and systemic manifestations is a rare genetic condition manifested most commonly by cerebral and retinal ischemia. This retinal vasculopathy leads to occlusions of small-caliber retinal vessels in the superficial plexus and deep plexus with resulting cotton wool spots and paracentral acute middle maculopathy, respectively. Recognition of the retinal findings by ophthalmologists and neurologists may avoid unnecessary brain biopsies in diagnosing this rare disorder.

Health hazard evaluation report No. HHE-80-233-793, Davis Bessie Nuclear Power Station, Toledo Edison Company, United Engineers and Contractors Company (UE and C), Oak Harbor, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cone, J.; Hartle, R.

1981-01-01

Personal air samples were analyzed and employees were given medical evaluations at Davis Bessie Nuclear Power Station (SIC-4911) in Oak Harbor, Ohio. Requests for evaluation were made by a union representative of the United Engineers and Contractors and a union representative of employees of Toledo Edison Company, working on site at the power station, to evaluate employee skin and scalp problems due to exposure to ceramic wood fibers. Preliminary surveys were conducted on September 24 and 25, 1980 and a follow-up survey was performed on October 16, 1980. Environmental evaluation consisted of gravimetric analyses of personal air samples for airbornemore » ceramic wool fibers. A total of 400 production and maintenance workers and varying numbers of construction workers were exposed to the fibers during installation of insulation which was completed at the time of the survey. The three personal air samples showed no accumulation of particulates and fibers detected were nonrespirable. Medical evaluations were conducted in 52 workers and scalp scrapings were obtained from 43 workers. Thirty seven workers had histories suggestive of irritant dermatitis of the scalp; 24 workers had physical findings consistent with the diagnosis. Of the 43 scalp samples, 18 were contaminated with organisms of the gut, perineum, skin or respiratory tract. Dermatitis was directly related to the history of dust exposure. The authors conclude that a potential health hazard exists for employees from exposure to ceramic wool fiber. Recommendations include provision of handwashing facilities and protective clothing for employees, and installation of an impermeable covering for the ceramic wool fiber.« less

Intrinsic curvature in wool fibres is determined by the relative length of orthocortical and paracortical cells.

PubMed

Harland, Duane P; Vernon, James A; Woods, Joy L; Nagase, Shinobu; Itou, Takashi; Koike, Kenzo; Scobie, David A; Grosvenor, Anita J; Dyer, Jolon M; Clerens, Stefan

2018-03-22

Hair curvature underpins structural diversity and function in mammalian coats, but what causes curl in keratin hair fibres? To obtain structural data to determine one aspect of this question, we used confocal microscopy to provide in situ measurements of the two cell types that make up the cortex of merino wool fibres, which was chosen as a well-characterised model system representative of narrow diameter hairs, such as underhairs. We measured orthocortical and paracortical cross-sectional areas, and cortical cell lengths, within individual fibre snippets of defined uniplanar curvature. This allowed a direct test of two long-standing theories of the mechanism of curvature in hairs. We found evidence contradicting the theory that curvature results from there being more cells on the side of the fibre closest to the outside, or convex edge, of curvature. In all cases, the orthocortical cells close to the outside of curvature were longer than paracortical cells close to the inside of the curvature, which supports the theory that curvature is underpinned by differences in cell type length. However, the latter theory also implies that, for all fibres, curvature should correlate with the proportions of orthocortical and paracortical cells, and we found no evidence for this. In merino wool, it appears that the absolute length of cells of each type and proportion of cells varies from fibre to fibre, and only the difference between the length of the two cell types is important. Implications for curvature in higher diameter hairs, such as guard hairs and those on the human scalp, are discussed. © 2018. Published by The Company of Biologists Ltd.

Effect of Peptides' Binding on the Antimicrobial Activity and Biocompatibility of Protein-Based Substrates

NASA Astrophysics Data System (ADS)

Kaisersberger Vincek, Maja

This work reveals the effect of coupling approach (chemical by using carbodiimide chemistry and grafting-to vs. grafting-from synthesis routes, and enzymatic by using transglutaminase) of a hydrophilic epsilon-poly-L-lysine (epsilonPL) and an amphiphilic oligo-acyl-lysyl (OAK) derivative (K-7alpha 12-OH) to wool fibers and gelatine (GEL) macromolecules, respectively, and substrates antibacterial activity against Gram-negative E. coli and Gram-positive S. aureus bacteria after 1-24 h of exposure, as well as their cytotoxicity. Different spectroscopic (ultraviolet-visible, infrared, fluorescence and electron paramagnetic resonance) and separation techniques (size-exclusion chromatography and capillary zone electrophoresis) as well as zeta potential and potentiometric titration analysis, were performed to confirm the covalent coupling of epsilonPL/OAK, and to determine the amount and orientation of its immobilisation. The highest and kinetically the fastest level of bacterial reduction was achieved with wool/GEL functionalised with epsilonPL/OAK by chemical grafting-to approach. This effect correlated with both the highest grafting yield and conformationally the highly-flexible (brush-like) orientation linkage of epsilonPL/OAK, implicating on the highest amount of accessible amino groups interacting with bacterial membrane. However, OAK's amphipathic structure, the cationic charge and the hydrophobic moieties, resulted to relatively high reduction of S. aureus for grafting-from and the enzymatic coupling approaches using OAK-functionalised GEL. The epsilonPL/OAK-functionalised GEL did not induce toxicity in human osteoblast cells, even at 25-fold higher concentration than bacterial minimum inhibitory (MIC) concentration of epsilonPL/OAK, supporting their potential usage in biomedical applications. It was also shown that non-ionic surfactant adsorbs strongly onto the wool surface during the process of washing, thereby blocking the functional sites of immobilized epsilonPL and decreases its antibacterial efficiency.

9 CFR 95.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture. Animal byproducts means hides, skins, hair, wool, glue stock, bones, hoofs, horns, bone meal... taxidermy mounts for personal exhibition. Blood meal means dried blood of animals. Bone meal means ground animal bones and hoof meal and horn meal. Bovine. Bos taurus, Bos indicus, and Bison bison. Bovine...

Anthrax

MedlinePlus

... spores during processes such as tanning hides and processing wool. Breathing in spores means a person has been exposed to anthrax. But it does not mean the person will have symptoms. The bacterial spores must germinate or sprout (the same way a seed sprouts before a plant grows) before the actual ...

16 CFR 300.25 - Country where wool products are processed or manufactured.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in [foreign country], finished in USA” or “Scarf made in USA of fabric made in China” or “Comforter Filled, Sewn and Finished in the U.S. With Shell Made in China” or “Made in [Foreign Country]/fabric made...

16 CFR 300.25 - Country where wool products are processed or manufactured.

Code of Federal Regulations, 2011 CFR

2011-01-01

... in [foreign country], finished in USA” or “Scarf made in USA of fabric made in China” or “Comforter Filled, Sewn and Finished in the U.S. With Shell Made in China” or “Made in [Foreign Country]/fabric made...

7 CFR 1421.9 - Basic loan rates.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., oats, grain sorghum, rice, peanuts, soybean, canola, flaxseed, mustard seed, rapeseed, safflower, sunflower seed, dry peas, lentils, chickpeas, crambe, sesame seed, wool, mohair and other crops designated... single loan rate in each county for each kind of other oilseeds, such as but not limited to, sunflower...

7 CFR 1421.9 - Basic loan rates.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., oats, grain sorghum, rice, peanuts, soybean, canola, flaxseed, mustard seed, rapeseed, safflower, sunflower seed, dry peas, lentils, chickpeas, crambe, sesame seed, wool, mohair and other crops designated... single loan rate in each county for each kind of other oilseeds, such as but not limited to, sunflower...

16 CFR 300.4 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 300.4 Section 300.4 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300.4 Registered...

Keratin sponge/hydrogel II, active agent delivery

USDA-ARS?s Scientific Manuscript database

Keratin sponge/hydrogels from oxidation and reduction hydrolysis of fine and coarse wool fibers were formed to behave as cationic hydrogels to swell and release active agents in the specific region of the gastro-intestinal (GI) tract. Their porous, interpenetrating networks (IPN) were effective for...

76 FR 1402 - Notice of allocation of Tariff Rate Quotas (TRQ) on the Import of Certain Worsted Wool Fabrics...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-10

... Receiving Allocation Adrian Jules LTD--Rochester, NY, HMX, LLC-- New York, NY, Hugo Boss Cleveland, Inc... York, NY, HMX, LLC--New York, NY, Hugo Boss Cleveland, Inc.--Brooklyn, OH, JA Apparel Corp.--New York...

Analysis of associations between the prion protein genotypes and production traits in East Friesian milk sheep.

PubMed

De Vries, F; Hamann, H; Drögemüller, C; Ganter, M; Distl, O

2005-01-01

The objective of this study was to analyze associations between ovine prion protein genotypes and production traits in East Friesian milk sheep. Production traits included the type traits scores for muscle mass, wool quality, and type; the reproduction traits age at first lambing, first lambing interval, second lambing interval, and total number of lambs born; the milk performance traits; milk, fat, and protein yields; fat and protein contents; and somatic cell scores. Prion protein genotypes were available for 658 East Friesian milk sheep. Linear animal models were used for the analysis of the prion protein genotype effects. The scores of the genotyped sheep for muscle mass, type, wool quality, and fat yield were significantly superior to those of the nongenotyped animals. An explanation for this might be that breeders seek to minimize genotyping costs by preselecting animals that do not meet the top breeding requirements. No significant associations were found between the prion protein genotypes and milk performance, type, or reproduction traits.

Evidence for the involvement of the anthranilate degradation pathway in Pseudomonas aeruginosa biofilm formation

PubMed Central

Costaglioli, Patricia; Barthe, Christophe; Claverol, Stephane; Brözel, Volker S; Perrot, Michel; Crouzet, Marc; Bonneu, Marc; Garbay, Bertrand; Vilain, Sebastien

2012-01-01

Bacterial biofilms are complex cell communities found attached to surfaces and surrounded by an extracellular matrix composed of exopolysaccharides, DNA, and proteins. We investigated the whole-genome expression profile of Pseudomonas aeruginosa sessile cells (SCs) present in biofilms developed on a glass wool substratum. The transcriptome and proteome of SCs were compared with those of planktonic cell cultures. Principal component analysis revealed a biofilm-specific gene expression profile. Our study highlighted the overexpression of genes controlling the anthranilate degradation pathway in the SCs grown on glass wool for 24 h. In this condition, the metabolic pathway that uses anthranilate for Pseudomonas quinolone signal production was not activated, which suggested that anthranilate was primarily being consumed for energy metabolism. Transposon mutants defective for anthranilate degradation were analyzed in a simple assay of biofilm formation. The phenotypic analyses confirmed that P. aeruginosa biofilm formation partially depended on the activity of the anthranilate degradation pathway. This work points to a new feature concerning anthranilate metabolism in P. aeruginosa SCs. PMID:23170231

Highly Stretchable Multifunctional Wearable Devices Based on Conductive Cotton and Wool Fabrics.

PubMed

Souri, Hamid; Bhattacharyya, Debes

2018-06-05

The demand for stretchable, flexible, and wearable multifunctional devices based on conductive nanomaterials is rapidly increasing considering their interesting applications including human motion detection, robotics, and human-machine interface. There still exists a great challenge to manufacture stretchable, flexible, and wearable devices through a scalable and cost-effective fabrication method. Herein, we report a simple method for the mass production of electrically conductive textiles, made of cotton and wool, by hybridization of graphene nanoplatelets and carbon black particles. Conductive textiles incorporated into a highly elastic elastomer are utilized as highly stretchable and wearable strain sensors and heaters. The electromechanical characterizations of our multifunctional devices establish their excellent performance as wearable strain sensors to monitor various human motions, such as finger, wrist, and knee joint movements, and to recognize sound with high durability. Furthermore, the electrothermal behavior of our devices shows their potential application as stretchable and wearable heaters working at a maximum temperature of 103 °C powered with 20 V.

Assessment of the Dyeing Properties of the Pigments Produced by Talaromyces spp.

PubMed Central

Oliveira, Jorge; Sousa-Gallagher, Maria; Montañez, Julio Cesar

2017-01-01

The high production yields of pigments by Talaromyces spp. and their high thermal stability have implied that industrial application interests may emerge in the food and textile industries, as they both involve subjecting the colourants to high temperatures. The present study aimed to assess the potential application of the pigments produced by Talaromyces spp. in the textile area by studying their dyeing properties. Dyeing studies were performed on wool. The dyeing process consisted of three stages: scouring, mordanting, and dyeing. Two different mordants (alum, A; ferric chloride, F) were tested at different concentrations on fabric weight (A: 5, 10, 15%; F: 10, 20, 30%). The mordanting process had a significant effect on the final colour of the dyed fabrics obtained. The values of dyeing rate constant (k), half-time of dyeing (t1/2), and sorption kinetics behaviour were evaluated and discussed. The obtained results showed that pigments produced by Talaromyces spp. could serve as a source for the natural dyeing of wool textiles. PMID:29371555

The analysis of colored acrylic, cotton, and wool textile fibers using micro-Raman spectroscopy. Part 2: comparison with the traditional methods of fiber examination.

PubMed

Buzzini, Patrick; Massonnet, Genevieve

2015-05-01

In the second part of this survey, the ability of micro-Raman spectroscopy to discriminate 180 fiber samples of blue, black, and red cottons, wools, and acrylics was compared to that gathered with the traditional methods for the examination of textile fibers in a forensic context (including light microscopy methods, UV-vis microspectrophotometry and thin-layer chromatography). This study shows that the Raman technique plays a complementary and useful role to obtain further discriminations after the application of light microscopy methods and UV-vis microspectrophotometry and assure the nondestructive nature of the analytical sequence. These additional discriminations were observed despite the lower discriminating powers of Raman data considered individually, compared to those of light microscopy and UV-vis MSP. This study also confirms that an instrument equipped with several laser lines is necessary for an efficient use as applied to the examination of textile fibers in a forensic setting. © 2015 American Academy of Forensic Sciences.

Moisture and Thermal Conductivity of Lightweight Block Walls

NASA Astrophysics Data System (ADS)

Joosep, R.

2015-11-01

This article examines thermal properties of lightweight block walls and their changes over the course of time. Three different types of lightweight blocks and two types of heat insulation are used in construction. Aeroc aerated concrete blocks are in use, as well as compacted LECA (Lightweight Expanded Clay Aggregate) Fibo blocks made from burned clay and Silbet blocks produced from oil shale ash. Expanded Thermisol EPS60F polystyrene plates and glass wool Isover OL-P plates are used for thermal insulation. The actual and computational values of thermal conductivity and the water draining properties of walls over time are compared in this article. Water draining from glass wool walls is relatively fast. Water-draining can take over a year in polystyrene insulated walls. All four wall constructions can be used as external walls, but care must be taken regarding the moisture content of the blocks during construction (the construction should be handled with care to minimise the moisture in the blocks), especially in polystyrene board-insulated walls.

Reuse of ultrafine mineral wool production waste in the manufacture of refractory concrete.

PubMed

Stonys, R; Kuznetsov, D; Krasnikovs, A; Škamat, J; Baltakys, K; Antonovič, V; Černašėjus, O

2016-07-01

The paper deals with the mineral wool production waste (cupola dust - CD), presents CD characterization and aims to reuse CD in production of refractory concrete with calcium aluminate cement. The study of CD covers its chemical, phase and thermal analyses along with the morphological study and determination of particles size distribution. Zeta-potential, electrical conductivity and pH values of CD suspension are presented in the paper as well. Commercial microsilica additive in refractory concrete has been replaced with cupola dust. Compositions of refractory concrete have been prepared by incorporating 1%, 2% and 3% of CD. The bulk density, ultrasonic wave velocity, cold crushing strength and thermal shock resistance of the created refractory concrete have been determined. Based on experimental results, it has been found that cupola dust may be used for the production of refractory concrete. The environmental impact related to the CD reuse in refractory concrete production has been evaluated as well. Copyright © 2016 Elsevier Ltd. All rights reserved.

A comparison between slaughter traits and meat quality of various sheep breeds: wool, dual-purpose and mutton.

PubMed

Cloete, J J E; Hoffman, L C; Cloete, S W P

2012-07-01

The slaughter and meat quality traits of 20-month-old wool (Merino), dual-purpose (Dohne Merino and South African Mutton Merino [SAMM]) and mutton (Dormer) type sheep were compared. Average live weights of SAMM and Dormer sheep were 23% heavier than those of Dohne Merinos which were 28% heavier than Merinos. Fat depths at the thirteenth rib and lumbar regions of Merino and Dohne Merino sheep were lower than those of SAMM and Dormer sheep. The cooking loss, drip loss and shearing value from the M. longissimus dorsi did not differ between breeds. The initial juiciness and sustained juiciness of meat from Merinos were rated significantly lower by sensory analysis. Meat from Dohne Merino was rated significantly more tender for the attribute first bite. It was demonstrated that Dormer and SAMM sheep had heavier but fatter carcasses than Merinos and Dohne Merinos, with differences in meat quality between breeds. Copyright © 2012 Elsevier Ltd. All rights reserved.

A further study on the dietary-regulated biosynthesis of high-sulphur wool proteins

PubMed Central

Gillespie, J. M.; Broad, Andrea; Reis, P. J.

1969-01-01

When the diet of sheep is supplemented by the infusion of sulphur-containing amino acids or casein into the abomasum, the newly synthesized wool shows characteristic changes in its amino acid composition, with significant increases in cystine, proline and serine and decreases in aspartic acid and phenylalanine. This modification seems to be due entirely to an alteration in the overall composition of the high-sulphur proteins and to an increase in their proportion in the fibre. These variations are not the result of a change in the composition of individual proteins, but are due to alterations in their relative proportions and to the initiation of the synthesis of `new' proteins, many of which are extremely rich in cystine. It is suggested that the heterogeneity of the high-sulphur proteins may be due, in part, to similar changes in composition caused by natural variations in the nutrition of sheep. ImagesFig. 3.Fig. 4. PMID:5774505

Metal-wool heat shields for space shuttle. [design, fabrication, and attachment to structure

NASA Technical Reports Server (NTRS)

Miller, R. C.; Clure, J. L.

1974-01-01

The packaging of metal wool for reusable thermal heat shields applied to aerodynamic and other surfaces for the space shuttle was analyzed and designed, and samples were fabricated and experimentally studied. Parametric trends were prepared for selected configurations. An all-metal thermally efficient, reliable, reusable and producible heat shield system was designed and structurally tested for use on spacecraft aerodynamic surfaces where temperatures do not exceed 810 K. Stainless steel sheet, primarily for structure and secondarily in the transverse plane for thermal expansion, was shown to accommodate thermal expansion in all directions when restrained at the edges and heated to 1360 K. Aerodynamic loads of 0.35 x 1000,000 newtons/sq meter, and higher, may be easily accepted by structures of this design. Seven all-metal thermal protection specimens, 12.7 cm square and 2.5 cm thick were fabricated and are being experimentally evaluated at simulated shuttle entry conditions in an arc jet facility.

19 CFR 11.12 - Labeling of wool products to indicate fiber content.

Code of Federal Regulations, 2013 CFR

2013-04-01

... more than 20 years prior to importation, and except carpets, rugs, mats, and upholsteries, shall have... by T.D. 72-262, 37 FR 20318, Sept. 29, 1972; T.D. 73-175, 38 FR 17446, July 2, 1973; T.D. 84-213, 49...

19 CFR 11.12 - Labeling of wool products to indicate fiber content.

Code of Federal Regulations, 2011 CFR

2011-04-01

... more than 20 years prior to importation, and except carpets, rugs, mats, and upholsteries, shall have... by T.D. 72-262, 37 FR 20318, Sept. 29, 1972; T.D. 73-175, 38 FR 17446, July 2, 1973; T.D. 84-213, 49...

19 CFR 11.12 - Labeling of wool products to indicate fiber content.

Code of Federal Regulations, 2014 CFR

2014-04-01

... more than 20 years prior to importation, and except carpets, rugs, mats, and upholsteries, shall have... by T.D. 72-262, 37 FR 20318, Sept. 29, 1972; T.D. 73-175, 38 FR 17446, July 2, 1973; T.D. 84-213, 49...

19 CFR 11.12 - Labeling of wool products to indicate fiber content.

Code of Federal Regulations, 2012 CFR

2012-04-01

... more than 20 years prior to importation, and except carpets, rugs, mats, and upholsteries, shall have... by T.D. 72-262, 37 FR 20318, Sept. 29, 1972; T.D. 73-175, 38 FR 17446, July 2, 1973; T.D. 84-213, 49...

25 CFR 307.2 - Certificates of genuineness; by whom affixed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Certificates of genuineness; by whom affixed. 307.2 Section 307.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO ALL-WOOL WOVEN... license issued by the Indian Arts and Crafts Board. ...