Cost-Effectiveness Analysis of the Self-Management Program for Thai Patients with Metabolic Syndrome.

PubMed

Sakulsupsiri, Anut; Sakthong, Phantipa; Winit-Watjana, Win

2016-05-01

Lifestyle modification programs are partly evaluated for their usefulness. This study aimed to assess the cost-effectiveness and healthy lifestyle persistence of a self-management program (SMP) for patients with metabolic syndrome (MetS) in Thai health care settings. A cost-effectiveness analysis was performed on the basis of an intervention study of 90 patients with MetS randomly allocated to the SMP and control groups. A Markov model with the Difference-in-Difference method was used to predict the lifetime costs from a societal perspective and quality-adjusted life-years (QALYs), of which 95% confidence intervals (CIs) were estimated by bootstrapping. The cost-effectiveness analysis, along with healthy lifestyle persistence, was performed using the discount rate of 3% per annum. Parameter uncertainties were identified using one-way and probabilistic sensitivity analyses. The lifetime costs tended to decrease in both groups. The SMP could save lifetime costs (-2310 baht; 95% CI -5960 to 1400) and gain QALYs (0.0098; 95% CI -0.0003 to 0.0190), compared with ordinary care. The probability of cost-effectiveness was 99.4% from the Monte-Carlo simulation, and the program was deemed cost-effective at dropout rates below 69% per year as determined by the threshold of 160,000 baht per QALY gained. The cost of macrovascular complications was the most influencing variable for the overall incremental cost-effectiveness ratio. The SMP provided by the health care settings is marginally cost-effective, and the persistence results support the implementation of the program to minimize the complications and economic burden of patients with MetS. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

RTEMS SMP and MTAPI for Efficient Multi-Core Space Applications on LEON3/LEON4 Processors

NASA Astrophysics Data System (ADS)

Cederman, Daniel; Hellstrom, Daniel; Sherrill, Joel; Bloom, Gedare; Patte, Mathieu; Zulianello, Marco

2015-09-01

This paper presents the final result of an European Space Agency (ESA) activity aimed at improving the software support for LEON processors used in SMP configurations. One of the benefits of using a multicore system in a SMP configuration is that in many instances it is possible to better utilize the available processing resources by load balancing between cores. This however comes with the cost of having to synchronize operations between cores, leading to increased complexity. While in an AMP system one can use multiple instances of operating systems that are only uni-processor capable, a SMP system requires the operating system to be written to support multicore systems. In this activity we have improved and extended the SMP support of the RTEMS real-time operating system and ensured that it fully supports the multicore capable LEON processors. The targeted hardware in the activity has been the GR712RC, a dual-core core LEON3FT processor, and the functional prototype of ESA's Next Generation Multiprocessor (NGMP), a quad core LEON4 processor. The final version of the NGMP is now available as a product under the name GR740. An implementation of the Multicore Task Management API (MTAPI) has been developed as part of this activity to aid in the parallelization of applications for RTEMS SMP. It allows for simplified development of parallel applications using the task-based programming model. An existing space application, the Gaia Video Processing Unit, has been ported to RTEMS SMP using the MTAPI implementation to demonstrate the feasibility and usefulness of multicore processors for space payload software. The activity is funded by ESA under contract 4000108560/13/NL/JK. Gedare Bloom is supported in part by NSF CNS-0934725.

Conceptual Design of Simulation Models in an Early Development Phase of Lunar Spacecraft Simulator Using SMP2 Standard

NASA Astrophysics Data System (ADS)

Lee, Hoon Hee; Koo, Cheol Hea; Moon, Sung Tae; Han, Sang Hyuck; Ju, Gwang Hyeok

2013-08-01

The conceptual study for Korean lunar orbiter/lander prototype has been performed in Korea Aerospace Research Institute (KARI). Across diverse space programs around European countries, a variety of simulation application has been developed using SMP2 (Simulation Modelling Platform) standard related to portability and reuse of simulation models by various model users. KARI has not only first-hand experience of a development of SMP compatible simulation environment but also an ongoing study to apply the SMP2 development process of simulation model to a simulator development project for lunar missions. KARI has tried to extend the coverage of the development domain based on SMP2 standard across the whole simulation model life-cycle from software design to its validation through a lunar exploration project. Figure. 1 shows a snapshot from a visualization tool for the simulation of lunar lander motion. In reality, a demonstrator prototype on the right-hand side of image was made and tested in 2012. In an early phase of simulator development prior to a kick-off start in the near future, targeted hardware to be modelled has been investigated and indentified at the end of 2012. The architectural breakdown of the lunar simulator at system level was performed and the architecture with a hierarchical tree of models from the system to parts at lower level has been established. Finally, SMP Documents such as Catalogue, Assembly, Schedule and so on were converted using a XML(eXtensible Mark-up Language) converter. To obtain benefits of the suggested approaches and design mechanisms in SMP2 standard as far as possible, the object-oriented and component-based design concepts were strictly chosen throughout a whole model development process.

Combined antibacterial activity of phage lytic proteins holin and lysin from Streptococcus suis bacteriophage SMP.

PubMed

Shi, Yibo; Li, Ning; Yan, Yaxian; Wang, Hengan; Li, Yan; Lu, Chengping; Sun, Jianhe

2012-07-01

Development of novel antibacterial agents is required to control infection with multidrug-resistant Streptococcus suis. HolSMP and LySMP, the holin and lysin of S. suis serotype 2 bacteriophage, named SMP, are responsible for lysis of host cells and release of progeny phage. HolSMP and LySMP expressed in Escherichia coli BL21(DE3) exerted efficient activity at 37 °C, pH 5.2, with addition of 0.8 % β-mercaptoethanol. Lytic spectra of purified HolSMP, LySMP or HolSMP + LySMP mixture were investigated. HolSMP, exhibiting a narrow lytic spectrum, was effective against Staphylococcus aureus and Bacillus subtilis, which were insensitive to LySMP. Moreover, HolSMP was identified as a promising antibacterial agent which was able to extend the spectrum of LySMP. The data suggest that combined use of holin and lysin could be a candidate strategy for resolution of drug resistance.

Parallel-aware, dedicated job co-scheduling within/across symmetric multiprocessing nodes

DOEpatents

Jones, Terry R.; Watson, Pythagoras C.; Tuel, William; Brenner, Larry; ,Caffrey, Patrick; Fier, Jeffrey

2010-10-05

In a parallel computing environment comprising a network of SMP nodes each having at least one processor, a parallel-aware co-scheduling method and system for improving the performance and scalability of a dedicated parallel job having synchronizing collective operations. The method and system uses a global co-scheduler and an operating system kernel dispatcher adapted to coordinate interfering system and daemon activities on a node and across nodes to promote intra-node and inter-node overlap of said interfering system and daemon activities as well as intra-node and inter-node overlap of said synchronizing collective operations. In this manner, the impact of random short-lived interruptions, such as timer-decrement processing and periodic daemon activity, on synchronizing collective operations is minimized on large processor-count SPMD bulk-synchronous programming styles.

Crystal structures of Mmm1 and Mdm12–Mmm1 reveal mechanistic insight into phospholipid trafficking at ER-mitochondria contact sites

PubMed Central

Jeong, Hanbin; Park, Jumi; Jun, Youngsoo; Lee, Changwook

2017-01-01

The endoplasmic reticulum (ER)-mitochondria encounter structure (ERMES) comprises mitochondrial distribution and morphology 12 (Mdm12), maintenance of mitochondrial morphology 1 (Mmm1), Mdm34, and Mdm10 and mediates physical membrane contact sites and nonvesicular lipid trafficking between the ER and mitochondria in yeast. Herein, we report two crystal structures of the synaptotagmin-like mitochondrial lipid-binding protein (SMP) domain of Mmm1 and the Mdm12–Mmm1 complex at 2.8 Å and 3.8 Å resolution, respectively. Mmm1 adopts a dimeric SMP structure augmented with two extra structural elements at the N and C termini that are involved in tight self-association and phospholipid coordination. Mmm1 binds two phospholipids inside the hydrophobic cavity, and the phosphate ion of the distal phospholipid is specifically recognized through extensive H-bonds. A positively charged concave surface on the SMP domain not only mediates ER membrane docking but also results in preferential binding to glycerophospholipids such as phosphatidylcholine (PC), phosphatidic acid (PA), phosphatidylglycerol (PG), and phosphatidylserine (PS), some of which are substrates for lipid-modifying enzymes in mitochondria. The Mdm12–Mmm1 structure reveals two Mdm12s binding to the SMP domains of the Mmm1 dimer in a pairwise head-to-tail manner. Direct association of Mmm1 and Mdm12 generates a 210-Å-long continuous hydrophobic tunnel that facilitates phospholipid transport. The Mdm12–Mmm1 complex binds all glycerophospholipids except for phosphatidylethanolamine (PE) in vitro. PMID:29078410

Global Systems-Level Analysis of Hfq and SmpB Deletion Mutants in Salmonella: Implications for Virulence and Global Protein Translation

PubMed Central

Porwollik, Steffen; Mottaz-Brewer, Heather; Petritis, Brianne O.; Jaitly, Navdeep; Adkins, Joshua N.; McClelland, Michael; Heffron, Fred; Smith, Richard D.

2009-01-01

Using sample-matched transcriptomics and proteomics measurements it is now possible to begin to understand the impact of post-transcriptional regulatory programs in Enterobacteria. In bacteria post-transcriptional regulation is mediated by relatively few identified RNA-binding protein factors including CsrA, Hfq and SmpB. A mutation in any one of these three genes, csrA, hfq, and smpB, in Salmonella is attenuated for mouse virulence and unable to survive in macrophages. CsrA has a clearly defined specificity based on binding to a specific mRNA sequence to inhibit translation. However, the proteins regulated by Hfq and SmpB are not as clearly defined. Previous work identified proteins regulated by hfq using purification of the RNA-protein complex with direct sequencing of the bound RNAs and found binding to a surprisingly large number of transcripts. In this report we have used global proteomics to directly identify proteins regulated by Hfq or SmpB by comparing protein abundance in the parent and isogenic hfq or smpB mutant. From these same samples we also prepared RNA for microarray analysis to determine if alteration of protein expression was mediated post-transcriptionally. Samples were analyzed from bacteria grown under four different conditions; two laboratory conditions and two that are thought to mimic the intracellular environment. We show that mutants of hfq and smpB directly or indirectly modulate at least 20% and 4% of all possible Salmonella proteins, respectively, with limited correlation between transcription and protein expression. These proteins represent a broad spectrum of Salmonella proteins required for many biological processes including host cell invasion, motility, central metabolism, LPS biosynthesis, two-component regulatory systems, and fatty acid metabolism. Our results represent one of the first global analyses of post-transcriptional regulons in any organism and suggest that regulation at the translational level is widespread and plays an important role in virulence regulation and environmental adaptation for Salmonella. PMID:19277208

Sustainable Materials Management: U.S. State Data Measurement Sharing Program

EPA Pesticide Factsheets

The State Data Measurement Sharing Program (SMP) is an online reporting, information sharing, and measurement tool that allows U.S. states to share a wide range of information about waste, recycling, and composting.

SMP84: Improvements to Capability and Prediction Accuracy of the Standard Ship Motion Program SMP81

DTIC Science & Technology

1985-09-01

active fin behaves in a manner similar to a rotating cylinder in a flow. The general form of the Magnus Lift term is FML z 2,(Vt/V)(2rs)(PV2 /2) (38...DEPARTMENT [AVIATION AND "SHIP PERFORMANCE SURFACE EFFECTS • ~ ~~~~DEPARTMENTSUFEEF T PT 1DEPARTMENT• 15 16 COMPUTATION.STRUCTURES MATHEMATICS...Force vector developed by active motion of tin F* Magnitude of force due to active motion of fin FML Magnus lift term FP Forward perpendicular Fv

Reconfigurable Photonic Crystals Enabled by Multistimuli-Responsive Shape Memory Polymers Possessing Room Temperature Shape Processability.

PubMed

Fang, Yin; Leo, Sin-Yen; Ni, Yongliang; Wang, Junyu; Wang, Bingchen; Yu, Long; Dong, Zhe; Dai, Yuqiong; Basile, Vito; Taylor, Curtis; Jiang, Peng

2017-02-15

Traditional shape memory polymers (SMPs) are mostly thermoresponsive, and their applications in nano-optics are hindered by heat-demanding programming and recovery processes. By integrating a polyurethane-based shape memory copolymer with templating nanofabrication, reconfigurable/rewritable macroporous photonic crystals have been demonstrated. This SMP coupled with the unique macroporous structure enables unusual all-room-temperature shape memory cycles. "Cold" programming involving microscopic order-disorder transitions of the templated macropores is achieved by mechanically deforming the macroporous SMP membranes. The rapid recovery of the permanent, highly ordered photonic crystal structure from the temporary, disordered configuration can be triggered by multiple stimuli including a large variety of vapors and solvents, heat, and microwave radiation. Importantly, the striking chromogenic effects associated with these athermal and thermal processes render a sensitive and noninvasive optical methodology for quantitatively characterizing the intriguing nanoscopic shape memory effects. Some critical parameters/mechanisms that could significantly affect the final performance of SMP-based reconfigurable photonic crystals including strain recovery ratio, dynamics and reversibility of shape recovery, as well as capillary condensation of vapors in macropores, which play a crucial role in vapor-triggered recovery, can be evaluated using this new optical technology.

Translational research into species differences of endocrine toxicity via steroidogenesis inhibition by SMP-028 — For human safety in clinical study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishizato, Yohei, E-mail: yohei-nishizato@ds-pharma.co.jp; Imai, Satoki; Okahashi, Noriko

2014-05-01

SMP-028 is a drug candidate developed for the treatment of asthma. In a 13-week repeated dose toxicity study of SMP-028 in rats and monkeys, differences of endocrine toxicological events between rats and monkeys were observed. In rats, these toxicological events mainly consisted of pathological changes in the adrenal, testis, ovary, and the other endocrine-related organs. On the other hand, in monkeys, no toxicological events were observed. The goal of this study is to try to understand the reason why only rats, but not monkeys, showed toxicological events following treatment with SMP-028 and to eventually predict the possible toxicological effect ofmore » this compound on human endocrine organs. Our results show that SMP-028 inhibits neutral cholesterol esterase more strongly than other steroidogenic enzymes in rats. Although SMP-028 also inhibits monkeys and human neutral cholesterol esterase, this inhibition is much weaker than that of rat neutral cholesterol esterase. These results indicate (1) that the difference in endocrine toxicological events between rats and monkeys is mainly due to inhibition of steroidogenesis by SMP-028 in rats, not in monkeys, and (2) that SMP-028 may not affect steroidogenesis in humans and therefore might cause no endocrine toxicological events in clinical studies. - Highlights: • SMP-028 inhibits neutral CEase more strongly than other steroidogenic enzymes in rats. • Inhibition of neutral CEase in rats by SMP-028 suppresses steroidogenesis in vivo. • SMP-028 does not inhibit neutral CEase in monkeys in vivo. • Steroidogenesis pathway in monkeys treated with SMP-028 was not suppressed. • SMP-028 may not inhibit LIPE in humans in vivo.« less

Targeting the MEF2-Like Transcription Factor Smp1 by the Stress-Activated Hog1 Mitogen-Activated Protein Kinase

PubMed Central

Nadal, Eulàlia de; Casadomé, Laura; Posas, Francesc

2003-01-01

Exposure of Saccharomyces cerevisiae to increases in extracellular osmolarity activates the stress-activated Hog1 mitogen-activated protein kinase (MAPK), which is essential for cell survival upon osmotic stress. Yeast cells respond to osmotic stress by inducing the expression of a very large number of genes, and the Hog1 MAPK plays a critical role in gene transcription upon stress. To understand how Hog1 controls gene expression, we designed a genetic screen to isolate new transcription factors under the control of the MAPK and identified the MEF2-like transcription factor, Smp1, as a target for Hog1. Overexpression of SMP1 induced Hog1-dependent expression of osmoresponsive genes such as STL1, whereas smp1Δ cells were defective in their expression. Consistently, smp1Δ cells displayed reduced viability upon osmotic shock. In vivo coprecipitation and phosphorylation studies showed that Smp1 and Hog1 interact and that Smp1 is phosphorylated upon osmotic stress in a Hog1-dependent manner. Hog1 phosphorylated Smp1 in vitro at the C-terminal region. Phosphorylation of Smp1 by the MAPK is essential for its function, since a mutant allele unable to be phosphorylated by the MAPK displays impaired stress responses. Thus, our data indicate that Smp1 acts downstream of Hog1, controlling a subset of the responses induced by the MAPK. Moreover, Smp1 concentrates in the nucleus during the stationary phase, and the lack of SMP1 results in cells that lose viability in the stationary phase. Localization of Smp1 depends on HOG1, and consistently, hog1Δ cells also lose viability during this growth phase. These data suggest that Smp1 could be mediating a role for the Hog1 MAPK during the stationary phase. PMID:12482976

Shape memory polymer (SMP) gripper with a release sensing system

DOEpatents

Maitland, Duncan J.; Lee, Abraham P.; Schumann, Daniel L.; Silva, Luiz Da

2000-01-01

A system for releasing a target material, such as an embolic coil from an SMP located at the end of a catheter utilizing an optical arrangement for releasing the material. The system includes a laser, laser driver, display panel, photodetector, fiber optics coupler, fiber optics and connectors, a catheter, and an SMP-based gripper, and includes a release sensing and feedback arrangement. The SMP-based gripper is heated via laser light through an optic fiber causing the gripper to release a target material (e.g., embolic coil for therapeutic treatment of aneurysms). Various embodiments are provided for coupling the laser light into the SMP, which includes specific positioning of the coils, removal of the fiber cladding adjacent the coil, a metal coating on the SMP, doping the SMP with a gradient absorbing dye, tapering the fiber optic end, coating the SMP with low refractive index material, and locating an insert between the fiber optic and the coil.

Fouling potential evaluation of soluble microbial products (SMP) with different membrane surfaces in a hybrid membrane bioreactor using worm reactor for sludge reduction.

PubMed

Li, Zhipeng; Tian, Yu; Ding, Yi; Chen, Lin; Wang, Haoyu

2013-07-01

The fouling characteristics of soluble microbial products (SMP) in the membrane bioreactor coupled with Static Sequencing Batch Worm Reactor (SSBWR-MBR) were tested with different types of membranes. It was noted that the flux decrements of S-SMP (SMP in SSBWR-MBR) with cellulose acetate (CA), polyvinylidene fluoride (PVDF) and polyether sulfones (PES) membranes were respectively 6.7%, 8.5% and 9.5% lower compared to those of C-SMP (SMP in Control-MBR) with corresponding membranes. However, for both the filtration of the C-SMP and S-SMP, the CA membrane exhibited the fastest diminishing rate of flux among the three types of membranes. The surface morphology analysis showed that the CA membrane exhibited more but smaller protuberances compared to the PVDF and PES. The second minimums surrounding each protruding asperity on CA membrane were more than those on the PVDF and PES membranes, enhancing the attachment of SMP onto the membrane surface. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effective thermo-mechanical properties and shape memory effect of CNT/SMP composites

NASA Astrophysics Data System (ADS)

Yang, Qingsheng; Liu, Xia; Leng, Fangfang

2009-07-01

Shape memory polymer (SMP) has been applied in many fields as intelligent sensors and actuators. In order to improve the mechanical properties and recovery force of SMP, the addition of minor amounts of carbon nanotubes (CNT) into SMP has attracted wide attention. A micromechanical model and thermo-mechanical properties of CNT/SMP composites were studied in this paper. The thermo-mechanical constitutive relation of intellectual composites with isotropic and transversely isotropic CNT was obtained. Moreover, the shape memory effect of CNT/SMP composites and the effect of temperature and the volume fraction of CNT were discussed. The work shows that CNT/SMP composites exhibit excellent macroscopic thermo-mechanical properties and shape memory effect, while both of them can be affected remarkably by temperature and the microstructure parameters.

Ends of the line for tmRNA-SmpB

DOE PAGES

Hudson, Corey M.; Lau, Britney Y.; Williams, Kelly P.

2014-08-13

Genes for the RNA tmRNA and protein SmpB, partners in the trans-translation process that rescues stalled ribosomes, have previously been found in all bacteria and some organelles. We validate recent identification of tmRNA homologs in oomycete mitochondria by finding partner genes from oomycete nuclei that target SmpB to the mitochondrion. Exhaustive search now identifies a small number of complete, often highly derived, bacterial genomes that appear to lack a functional copy of one or the other partner gene (but not both). Three groups with reduced genomes have lost the central loop of SmpB, which is thought to improve alanylation andmore » EF-Tu activation: Carsonella, Hodgkinia and the hemplasmas (hemotropic Mycoplasma). Carsonella has also lost the SmpB C-terminal tail, thought to stimulate the decoding center of the ribosome. Carsonella moreover exhibits gene overlap such that tmRNA maturation should produce a non-stop smpB mRNA, and one isolate exhibits complete degradation of the tmRNA gene yet its smpB shows no evidence for relaxed selective constraint. After loss of the SmpB central loop in the hemoplasmas, a subclade apparently lost tmRNA. At least some of the tmRNA/SmpB-deficient strains appear to further lack the ArfA and ArfB backup systems for ribosome rescue. The most frequent neighbors of smpB are the tmRNA gene, a ratA/rnfH unit, and the gene for RNaseR, a known physical and functional partner of tmRNA-SmpB. The tmRNA Website has moved and been updated, adding an SmpB sequence database (http://bioinformatics.sandia.gov/tmrna).« less

Senescence marker protein 30 (SMP30)/regucalcin (RGN) expression decreases with aging, acute liver injuries and tumors in zebrafish

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujisawa, Koichi; Terai, Shuji, E-mail: terais@yamaguchi-u.ac.jp; Hirose, Yoshikazu

2011-10-22

Highlights: {yields} Zebrafish SMP30/RGN mRNA expression decreases with aging. {yields} Decreased expression was observed in liver tumors as compared to the surrounding area. {yields} SMP30/RGN is important for liver proliferation and tumorigenesis. -- Abstract: Senescence marker protein 30 (SMP30)/regucalcin (RGN) is known to be related to aging, hepatocyte proliferation and tumorigenesis. However, expression and function of non-mammalian SMP30/RGN is poorly understood. We found that zebrafish SMP30/RGN mRNA expression decreases with aging, partial hepatectomy and thioacetamide-induced acute liver injury. SMP30/RGN expression was also greatly decreased in a zebrafish liver cell line. In addition, we induced liver tumors in adult zebrafish bymore » administering diethylnitrosamine. Decreased expression was observed in foci, hepatocellular carcinomas, cholangiocellular carcinomas and mixed tumors as compared to the surrounding area. We thus showed the importance of SMP30/RGN in liver proliferation and tumorigenesis.« less

Quantification of nitrous oxide (N2O) emissions and soluble microbial product (SMP) production by a modified AOB-NOB-N2O-SMP model.

PubMed

Kim, MinJeong; Wu, Guangxue; Yoo, ChangKyoo

2017-03-01

A modified AOB-NOB-N 2 O-SMP model able to quantify nitrous oxide (N 2 O) emissions and soluble microbial product (SMP) production during wastewater treatment is proposed. The modified AOB-NOB-N 2 O-SMP model takes into account: (1) two-step nitrification by ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), (2) N 2 O production by AOB denitrification under oxygen-limited conditions and (3) SMP production by microbial growth and endogenous respiration. Validity of the modified model is demonstrated by comparing the simulation results with experimental data from lab-scale sequencing batch reactors (SBRs). To reliably implement the modified model, a model calibration that adjusts model parameters to fit the model outputs to the experimental data is conducted. The results of this study showed that the modeling accuracy of the modified AOB-NOB-N 2 O-SMP model increases by 19.7% (NH 4 ), 51.0% (NO 2 ), 57.8% (N 2 O) and 16.7% (SMP) compared to the conventional model which does not consider the two-step nitrification and SMP production by microbial endogenous respiration. Copyright © 2016 Elsevier Ltd. All rights reserved.

Method for loading shape memory polymer gripper mechanisms

DOEpatents

Lee, Abraham P.; Benett, William J.; Schumann, Daniel L.; Krulevitch, Peter A.; Fitch, Joseph P.

2002-01-01

A method and apparatus for loading deposit material, such as an embolic coil, into a shape memory polymer (SMP) gripping/release mechanism. The apparatus enables the application of uniform pressure to secure a grip by the SMP mechanism on the deposit material via differential pressure between, for example, vacuum within the SMP mechanism and hydrostatic water pressure on the exterior of the SMP mechanism. The SMP tubing material of the mechanism is heated to above the glass transformation temperature (Tg) while reshaping, and subsequently cooled to below Tg to freeze the shape. The heating and/or cooling may, for example, be provided by the same water applied for pressurization or the heating can be applied by optical fibers packaged to the SMP mechanism for directing a laser beam, for example, thereunto. At a point of use, the deposit material is released from the SMP mechanism by reheating the SMP material to above the temperature Tg whereby it returns to its initial shape. The reheating of the SMP material may be carried out by injecting heated fluid (water) through an associated catheter or by optical fibers and an associated beam of laser light, for example.

Thermomechanical behavior of a two-way shape memory composite actuator

NASA Astrophysics Data System (ADS)

Ge, Qi; Westbrook, Kristofer K.; Mather, Patrick T.; Dunn, Martin L.; Qi, H. Jerry

2013-05-01

Shape memory polymers (SMPs) are a class of smart materials that can fix a temporary shape and recover to their permanent (original) shape in response to an environmental stimulus such as heat, electricity, or irradiation, among others. Most SMPs developed in the past can only demonstrate the so-called one-way shape memory effect; i.e., one programming step can only yield one shape memory cycle. Recently, one of the authors (Mather) developed a SMP that exhibits both one-way shape memory (1W-SM) and two-way shape memory (2W-SM) effects (with the assistance of an external load). This SMP was further used to develop a free-standing composite actuator with a nonlinear reversible actuation under thermal cycling. In this paper, a theoretical model for the PCO SMP based composite actuator was developed to investigate its thermomechanical behavior and the mechanisms for the observed phenomena during the actuation cycles, and to provide insight into how to improve the design.

Facile fabrication of uniaxial nanopatterns on shape memory polymer substrates using a complete bottom-up approach

NASA Astrophysics Data System (ADS)

Chen, Zhongbi; Krishnaswamy, Sridhar

2014-03-01

In earlier work, we have demonstrated an assisted self-assembly fabrication method for unidirectional submicron patterns using pre-programmed shape memory polymers (SMP) as the substrate in an organic/inorganic bilayer structure. In this paper, we propose a complete bottom-up method for fabrication of uniaxial wrinkles whose wavelength is below 300 nm. The method starts with using the aforementioned self-assembled bi-layer wrinkled surface as the template to make a replica of surface wrinkles on a PDMS layer which is spin-coated on a pre-programmed SMP substrate. When the shape recovery of the substrate is triggered by heating it to its transition temperature, the substrate has been programmed in such a way that it shrinks uniaxially to return to its permanent shape. Consequently, the wrinkle wavelength on PDMS reduces accordingly. A subsequent contact molding process is carried out on the PDMS layer spin-coated on another pre-programmed SMP substrate, but using the wrinkled PDMS surface obtained in the previous step as the master. By activating the shape recovery of the substrate, the wrinkle wavelength is further reduced a second time in a similar fashion. Our experiments showed that the starting wavelength of 640 nm decreased to 290 nm after two cycles of recursive molding. We discuss the advantages and limitations of our recursive molding approach compared to the prevalent top-down fabrication methods represented by lithography. The present study is expected to o er a simple and cost-e ective fabrication method of nano-scale uniaxial wrinkle patterns with the potential for large-scale mass-production.

Design and analysis of morphing wing based on SMP composite

NASA Astrophysics Data System (ADS)

Yu, Kai; Yin, Weilong; Sun, Shouhua; Liu, Yanju; Leng, Jinsong

2009-03-01

A new concept of a morphing wing based on shape memory polymer (SMP) and its reinforced composites is proposed in this paper. SMP used in this study is a thermoset styrene-based resin in contrast to normal thermoplastic SMP. During heating, the wing curled on the aircraft can be deployed, providing main lift for a morphing aircraft to realize the stable flight. Aerodynamic characteristics of the deployed morphing wing are calculated by using CFD software. The static deformation of the wing under the air loads is also analyzed by using the finite element method. The results show that the used SMP material can provide enough strength and stiffness for the application. Finally, preliminary testing is conducted to investigate the recovery performances of SMP and its reinforced composites. During the test, the deployment and the wind-resistant ability of the morphing wing are dramatically improved by adding reinforced phase to the SMP.

The Longitudinal Elderly Person Shadowing Program: Outcomes from an Interprofessional Senior Partner Mentoring Program

ERIC Educational Resources Information Center

Basran, Jenny F. S.; Dal Bello-Haas, Vanina; Walker, Doreen; MacLeod, Peggy; Allen, Bev; D'Eon, Marcel; McKague, Meredith; Chopin, Nicola S.; Trinder, Krista

2012-01-01

The University of Saskatchewan's Longitudinal Elderly Person Shadowing (LEPS) is an interprofessional senior mentors program (SMP) where teams of undergraduate students in their first year of medicine, pharmacy, and physiotherapy; 2nd year of nutrition; 3rd year nursing; and 4th year social work partner with community-dwelling older adults.…

Facile hydrophobicity/hydrophilicity modification of SMP surface based on metal constrained cracking

NASA Astrophysics Data System (ADS)

Han, Yu; Li, Peng; Zhao, Liangyu; Wang, Wenxin; Leng, Jinsong; Jin, Peng

2015-04-01

This study demonstrates an easy way to change surface characteristics, the water contact angle on styrene based shape memory polymer (SMP) surface alters before and after cracking formation and recovery. The contact angle of water on the original SMP surface is about 85 degree, after coating with Al and then kneading from side face at glass transition temperature Tg, cracking appeared both on Al film and SMP; cooling down and removing the Al film, cracks remain on SMP surface while the contact angle reduced to about 25 degree. When reheated above Tg, the cracks disappeared, and the contact angle go back to about 85 degree. The thin Al film bonded on SMP surface was coated by spurting, that constrains the deformation of SMP. Heating above Tg, there are complex interactions between soft SMP and hard metal film under kneading. The thin metal film cracked first with the considerable deformation of soft polymer, whereafter, the polymer was ripped by the metal cracks thus polymer cracked as well. Cracks on SMP can be fixed cooling down Tg, while reheated, cracks shrinking and the SMP recovers to its original smooth surface. Surface topography changed dramatically while chemical composition showed no change during the deformation and recovery cycle, as presented by SEM and EDS. Furthermore, the wetting cycle is repeatable. This facile method can be easily extended to the hydropobicity/hydrophilicity modification of other stimuli-responsive polymers and put forward many potential applications, such as microfluidic switching and molecule capture and release.

Southeast Asia's import demand for skim milk powder: Implications for US exporters.

PubMed

Davis, C G; Cessna, J G; Blayney, D P

2018-05-01

Dairy industries in Southeast Asia are small and produce less than the domestic market demands. As expenditure and population grow in Southeast Asia, it is expected that the expenditures on skim milk powder (SMP) will grow. In this study, we examined the competitiveness of US SMP in the Southeast Asian market with respect to other leading dairy exporters, including the European Union (EU-28), New Zealand, and Australia. Using monthly data from 2006 to 2015, Rotterdam models were used to estimate import demands for SMP in 4 Southeast Asian countries. In a scenario using annual averages from 2013 to 2015 as a baseline, our findings suggest that a 10% reduction in the US price of SMP would cause Indonesia, Singapore, Vietnam, and the Philippines SMP imports from the United States to increase by 3.96, 0.44, 2.68, and 1.94 kt, respectively. Under the same scenario, the value of US SMP imports would decrease for Indonesia, Vietnam, and the Philippines by $4.12, $2.93, and $2.48 million, respectively; however, the value of US SMP to Singapore would increase by $0.20 million. Singapore and Indonesia expenditures for the US SMP are elastic, which means that as expenditure and population in Southeast Asia continue to grow, a 1% increase in SMP expenditure in Singapore and Indonesia would result in 1.25 and 1.20% increases in US SMP exports. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of Salvia miltiorrhiza polysaccharides on boar spermatozoa during freezing-thawing.

PubMed

Shen, Tao; Jiang, Zhong-Liang; Liu, Hong; Li, Qing-Wang

2015-08-01

Salvia miltiorrhiza polysaccharides (SMPs) were extracted from S. miltiorrhiza in this study. The aim of the present study was to evaluate the effect of SMP on the motility of boar sperm, including the antioxidant effect of SMP on boar sperm and the effect of SMP on the in vivo fertilizing ability of frozen-thawed boar sperm. Fifty ejaculates from 5 Swagger boars were collected and diluted with an extender, which contained 3% glycerol (v/v) with five concentrations of SMP (0.2, 0.4, 0.6, 0.8, and 1.0mg/mL). The semen was frozen in 0.25mL straws at 1.0×10(9) cells/mL. Sixty gilts were inseminated using fresh semen, frozen semen with 0.4mg/mL of SMP and frozen semen without SMP. The results indicate that the addition of SMP to the extender results in a higher percentage of motile sperm post-thaw (P<0.05). The activities of superoxide dismutase, lactate dehydrogenase, glutamic-oxalacetic transaminease and catalase were all determined to be significantly higher than the control group after adding SMP to the extender (P<0.05). The artificial insemination (AI) results demonstrated that the litter size was significantly higher in the 0.4mg/mL of SMP group than in the control group (P<0.05). In conclusion, during the process of freezing, SMP can protect boar sperm from peroxidative damage and increase sperm motility and litter size during the process of freezing-thawing. The optimal concentration of SMP for the frozen extenders in this study was determined to be 0.4mg/mL. Copyright © 2015. Published by Elsevier B.V.

Peer Mentorship Program in Dental Education

ERIC Educational Resources Information Center

Ha-Ngoc, Tien; Park, Sang E.

2015-01-01

The Senior Mentorship Program (SMP) was created to encourage the fourth year dental students to act as mentors in the clinical environment as well as facilitate learning of clinic protocols and reinforce concepts in treatment planning for the third year students. Third year dental students engaged in educational conversations and received helpful…

S.M.P. SEQUENTIAL MATHEMATICS PROGRAM.

ERIC Educational Resources Information Center

CICIARELLI, V; LEONARD, JOSEPH

A SEQUENTIAL MATHEMATICS PROGRAM BEGINNING WITH THE BASIC FUNDAMENTALS ON THE FOURTH GRADE LEVEL IS PRESENTED. INCLUDED ARE AN UNDERSTANDING OF OUR NUMBER SYSTEM, AND THE BASIC OPERATIONS OF WORKING WITH WHOLE NUMBERS--ADDITION, SUBTRACTION, MULTIPLICATION, AND DIVISION. COMMON FRACTIONS ARE TAUGHT IN THE FIFTH, SIXTH, AND SEVENTH GRADES. A…

Integrating a novel shape memory polymer into surgical meshes to improve device performance during laparoscopic hernia surgery

NASA Astrophysics Data System (ADS)

Zimkowski, Michael M.

About 600,000 hernia repair surgeries are performed each year. The use of laparoscopic minimally invasive techniques has become increasingly popular in these operations. Use of surgical mesh in hernia repair has shown lower recurrence rates compared to other repair methods. However in many procedures, placement of surgical mesh can be challenging and even complicate the procedure, potentially leading to lengthy operating times. Various techniques have been attempted to improve mesh placement, including use of specialized systems to orient the mesh into a specific shape, with limited success and acceptance. In this work, a programmed novel Shape Memory Polymer (SMP) was integrated into commercially available polyester surgical meshes to add automatic unrolling and tissue conforming functionalities, while preserving the intrinsic structural properties of the original surgical mesh. Tensile testing and Dynamic Mechanical Analysis was performed on four different SMP formulas to identify appropriate mechanical properties for surgical mesh integration. In vitro testing involved monitoring the time required for a modified surgical mesh to deploy in a 37°C water bath. An acute porcine model was used to test the in vivo unrolling of SMP integrated surgical meshes. The SMP-integrated surgical meshes produced an automated, temperature activated, controlled deployment of surgical mesh on the order of several seconds, via laparoscopy in the animal model. A 30 day chronic rat model was used to test initial in vivo subcutaneous biocompatibility. To produce large more clinical relevant sizes of mesh, a mold was developed to facilitate manufacturing of SMP-integrated surgical mesh. The mold is capable of manufacturing mesh up to 361 cm2, which is believed to accommodate the majority of clinical cases. Results indicate surgical mesh modified with SMP is capable of laparoscopic deployment in vivo, activated by body temperature, and possesses the necessary strength and biocompatibility to function as suitable ventral hernia repair mesh, while offering a reduction in surgical operating time and improving mesh placement characteristics. Future work will include ball-burst tests similar to ASTM D3787-07, direct surgeon feedback studies, and a 30 day chronic porcine model to evaluate the SMP surgical mesh in a realistic hernia repair environment, using laparoscopic techniques for typical ventral hernia repair.

Programming for 1.6 Millon cores: Early experiences with IBM's BG/Q SMP architecture

NASA Astrophysics Data System (ADS)

Glosli, James

2013-03-01

With the stall in clock cycle improvements a decade ago, the drive for computational performance has continues along a path of increasing core counts on a processor. The multi-core evolution has been expressed in both a symmetric multi processor (SMP) architecture and cpu/GPU architecture. Debates rage in the high performance computing (HPC) community which architecture best serves HPC. In this talk I will not attempt to resolve that debate but perhaps fuel it. I will discuss the experience of exploiting Sequoia, a 98304 node IBM Blue Gene/Q SMP at Lawrence Livermore National Laboratory. The advantages and challenges of leveraging the computational power BG/Q will be detailed through the discussion of two applications. The first application is a Molecular Dynamics code called ddcMD. This is a code developed over the last decade at LLNL and ported to BG/Q. The second application is a cardiac modeling code called Cardioid. This is a code that was recently designed and developed at LLNL to exploit the fine scale parallelism of BG/Q's SMP architecture. Through the lenses of these efforts I'll illustrate the need to rethink how we express and implement our computational approaches. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Quantum chemical investigation on photodegradation mechanisms of sulfamethoxypyridazine with dissolved inorganic matter and hydroxyl radical.

PubMed

Shah, Shaheen; Hao, Ce

2017-07-01

Sulfamethoxypyridazine (SMP) is one of the commonly used sulfonamide antibiotics (SAs). SAs are mainly studied to undergo triplet-sensitized photodegradation in water under natural sunlight with other coexisting aquatic environmental organic pollutants. In this work, SMP was selected as a representative of SAs. We studied the mechanisms of triplet-sensitized photodegradation of SMP and the influence of selected dissolved inorganic matter, i.e., anions (Br - , Cl - , and NO 3 - ) and cations ions (Ca 2+ , Mg 2+ , and Zn 2+ ) on SMP photodegradation mechanism by quantum chemical methods. In addition, the degradation mechanisms of SMP by hydroxyl radical (OH) were also investigated. The creation of SO 2 extrusion product was accessed with two different energy pathways (pathway-1 and pathway-2) by following two steps (step-I and step-II) in the triplet-sensitized photodegradation of SMP. Due to low activation energy, the pathway-1 was considered as the main pathway to obtain SO 2 extrusion product. Step-II of pathway-1 was measured to be the rate-limiting step (RLS) of SMP photodegradation mechanism and the effect of the selected anions and cations was estimated for this step. All selected anions and cations promoted photodegradation of SMP by dropping the activation energy of pathway-1. The estimated low activation energies of different degradation pathways of SMP with OH radical indicate that OH radical is a very powerful oxidizing agent for SMP degradation via attack through benzene derivative and pyridazine derivative ring. Copyright © 2016. Published by Elsevier B.V.

LTPP Computed Parameter: Moisture Content

DOT National Transportation Integrated Search

2008-01-01

A study was conducted to compute in situ soil parameters based on time domain reflectometry (TDR) traces obtained from Long Term Pavement Performance (LTPP) test sections instrumented for the seasonal monitoring program (SMP). Ten TDR sensors were in...

Use of an Sm-p80–Based Therapeutic Vaccine to Kill Established Adult Schistosome Parasites in Chronically Infected Baboons

PubMed Central

Karmakar, Souvik; Zhang, Weidong; Ahmad, Gul; Torben, Workineh; Alam, Mayeen U.; Le, Loc; Damian, Raymond T.; Wolf, Roman F.; White, Gary L.; Carey, David W.; Carter, Darrick; Reed, Steven G.; Siddiqui, Afzal A.

2014-01-01

No vaccines are available for human use for any parasitic infections, including the helminthic disease schistosomiasis. Sm-p80, the large subunit of Schistosoma mansoni calpain, is a leading antigen candidate for a schistosomiasis vaccine. Prophylactic and antifecundity efficacies of Sm-p80 have been tested using a variety of vaccine approaches in both rodent and nonhuman primate models. However, the therapeutic efficacy of a Sm-p80–based vaccine had not been determined. In this study, we evaluated the therapeutic efficacy of Sm-p80 by using 2 different strategies and 3 Sm-p80–based vaccine formulations in baboons. Vaccine formulations were able to decrease established adult worms by 10%–36%, reduce retention of eggs in tissues by 10%–57%, and decrease egg excretion in feces by 13%–33%, compared with control formulations. Marked differences were observed in B and T cell immune correlates between vaccinated and control animals. This is the first report of killing of established adult schistosome worms by a vaccine. In addition to distinct prophylactic efficacy of Sm-p80, this study adds to the evidence that Sm-p80 is a potentially important antigen with both substantial prophylactic and therapeutic efficacies. These data reinforce that Sm-p80 should be moved forward along the path toward human clinical trials. PMID:24436452

Apparatus for loading shape memory gripper mechanisms

DOEpatents

Lee, Abraham P.; Benett, William J.; Schumann, Daniel L.; Krulevitch, Peter A.; Fitch, Joseph P.

2001-01-01

A method and apparatus for loading deposit material, such as an embolic coil, into a shape memory polymer (SMP) gripping/release mechanism. The apparatus enables the application of uniform pressure to secure a grip by the SMP mechanism on the deposit material via differential pressure between, for example, vacuum within the SMP mechanism and hydrostatic water pressure on the exterior of the SMP mechanism. The SMP tubing material of the mechanism is heated to above the glass transformation temperature (Tg) while reshaping, and subsequently cooled to below Tg to freeze the shape. The heating and/or cooling may, for example, be provided by the same water applied for pressurization or the heating can be applied by optical fibers packaged to the SMP mechanism for directing a laser beam, for example, thereunto. At a point of use, the deposit material is released from the SMP mechanism by reheating the SMP material to above the temperature Tg whereby it returns to its initial shape. The reheating of the SM material may be carried out by injecting heated fluid (water) through an associated catheter or by optical fibers and an associated beam of laser light, for example.

Loss of Military Performance due to Individual NBC Protection in a Tropic Environment (belasting en prestatieverlies door individuele nbc-beschermin gin de tropen)

DTIC Science & Technology

2006-08-01

SMP) 1 Trg Area 1330-1430 SMP 2 Trg Area 16 nov 0800-0900 SMP 3 Trg Area 0930-1200 Offensive Fire - LIVE FIRE Range 1 Range Complex 1300-1530 Command...Control Evaluation (C2) 1 Range Complex 1600-1700 SMP 4 Trg Area 17 nov 0930-1200 Defensive Fire - LIVE FIRE Range 2 Range Complex 1300-1530 Command...Control Evaluation (C2) 2 Range Complex 18 nov 0800-0900 SMP 5 Trg Area 0930-1200 Offensive Fire - LIVE FIRE Range 2 Range Complex 1300-1530

Inductively heated shape memory polymer for the magnetic actuation of medical devices.

PubMed

Buckley, Patrick R; McKinley, Gareth H; Wilson, Thomas S; Small, Ward; Benett, William J; Bearinger, Jane P; McElfresh, Michael W; Maitland, Duncan J

2006-10-01

Presently, there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with nickel zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.

Solvent stimulated actuation of polyurethane-based shape memory polymer foams using dimethyl sulfoxide and ethanol

NASA Astrophysics Data System (ADS)

Boyle, A. J.; Weems, A. C.; Hasan, S. M.; Nash, L. D.; Monroe, M. B. B.; Maitland, D. J.

2016-07-01

Solvent exposure has been investigated to trigger actuation of shape memory polymers (SMPs) as an alternative to direct heating. This study aimed to investigate the feasibility of using dimethyl sulfoxide (DMSO) and ethanol (EtOH) to stimulate polyurethane-based SMP foam actuation and the required solvent concentrations in water for rapid actuation of hydrophobic SMP foams. SMP foams exhibited decreased T g when submerged in DMSO and EtOH when compared to water submersion. Kinetic DMA experiments showed minimal or no relaxation for all SMP foams in water within 30 min, while SMP foams submerged in EtOH exhibited rapid relaxation within 1 min of submersion. SMP foams expanded rapidly in high concentrations of DMSO and EtOH solutions, where complete recovery over 30 min was observed in DMSO concentrations greater than 90% and in EtOH concentrations greater than 20%. This study demonstrates that both DMSO and EtOH are effective at triggering volume recovery of polyurethane-based SMP foams, including in aqueous environments, and provides promise for use of this actuation technique in various applications.

Long term pavement performance computed parameter : moisture content

DOT National Transportation Integrated Search

2008-01-01

A study was conducted to compute in situ soil parameters based on time domain reflectometry (TDR) traces obtained from Long Term Pavement Performance (LTPP) test sections instrumented for the seasonal monitoring program (SMP). Ten TDR sensors were in...

The science of spinal motion palpation: a review and update with implications for assessment and intervention

PubMed Central

Nyberg, Richard Edward; Russell Smith, A

2013-01-01

Spinal motion palpation (SMP) is a standard component of a manual therapy examination despite questionable reliability. The present research is inconclusive as to the relevance of the findings from SMP, with respect to the patient’s pain complaints. Differences in the testing methods and interpretation of spinal mobility testing are problematic. If SMP is to be a meaningful component of a spinal examination, the methods for testing and interpretation must be carefully scrutinized. The intent of this narrative review is to facilitate a better understanding of how SMP should provide the examiner with relevant information for assessment and treatment of patients with spinal pain disorders. The concept of just noticeable difference is presented and applied to SMP as a suggestion for determining the neutral zone behavior of a spinal segment. In addition, the use of a lighter, or more passive receptive palpation technique, is considered as a means for increasing tactile discrimination of spinal movement behavior. Further understanding of the scientific basis of testing SMP may improve intra- and inter-examiner reliability. The significance of the findings from SMP should be considered in context of the patient’s functional problem. Methodological changes may be indicated for the performance of SMP techniques, such as central posterior-anterior (PA) pressure and passive intervertebral motion tests, in order to improve reliability. Instructors of manual therapy involved in teaching SMP should be knowledgeable of the neurophysiological processes of touch sensation so as to best advise students in the application of the various testing techniques. PMID:24421627

Development of the hepatitis C self-management program.

PubMed

Groessl, Erik J; Weingart, Kimberly R; Gifford, Allen L; Asch, Steven M; Ho, Samuel B

2011-05-01

Chronic hepatitis C infection (HCV) is a major health problem that disproportionately affects people with limited resources. Many people with HCV are ineligible or refuse antiviral treatment, but less curative treatment options exist. These options include adhering to follow-up health visits, lifestyle changes, and avoiding hepatotoxins like alcohol. Herein, we describe a recently developed self-management program designed to assist HCV-infected patients with adherence and improve their health-related quality of life (HRQOL). The development of the Hepatitis C Self-Management Program (HCV-SMP) was informed by scientific literature, qualitative interviews with HCV-infected patients, self-management training, and feedback from HCV clinical experts. The Hepatitis C Self-Management Program (HCV-SMP) is a multi-faceted program that employs cognitive-behavioral principles and is designed to provide HCV-infected people with knowledge and skills for improving their HRQOL. The program consists of six 2-h workshop sessions which are held weekly. The sessions consist of a variety of group activities, including disease-specific information dissemination, action planning, and problem-solving. The intervention teaches skills for adhering to challenging treatment recommendations using a validated theoretical model. A randomized trial will test the efficacy of this novel HCV self-management program for improving HRQOL in a difficult to reach population. Published by Elsevier Ireland Ltd.

An Evaluative Review of School Accreditation Implementation Program in Indonesian Contexts

ERIC Educational Resources Information Center

Haryati, Sri

2014-01-01

This paper critically reviews and evaluates the implementation of School Accreditation Program for the period of 2013 with a particular reference to Central Java Schools, consisting of Kindergarten (TK) Elementary School (SD), Junior High School (SMP) and Senior High School (SMA) (Note 1). The aim of the review is to see to what extent they can…

The Senior Mentor Program at the University of South Carolina School of Medicine: An Innovative Geriatric Longitudinal Curriculum

ERIC Educational Resources Information Center

Roberts, Ellen; Richeson, Nancy A.; Thornhill, Joshua T., IV; Corwin, Sara J.; Eleazer, G. Paul

2006-01-01

This paper describes development, implementation, and evaluation strategies of a longitudinal geriatric curriculum, the Senior Mentor Program (SMP). The rationale for exposing undergraduate medical students to healthy, community-dwelling older adults is to use the relationship and activities as vehicles for improving knowledge of aging and…

78 FR 16648 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... Reimbursement (School Milk Program for Children), 7 CFR part 210, part 220, and part 215. OMB Control Number... of carrying out provisions of the Special Milk Program (SMP) in accordance with agreements approved... (& CFR 210.8, 215.10 and 220.11), the meal and milk data must be collected on forms FNS-806A and 806B...

Application of SMP composite in designing a morphing wing

NASA Astrophysics Data System (ADS)

Yu, Kai; Yin, Weilong; Liu, Yanju; Leng, Jinsong

2008-11-01

A new concept of a morphing wing based on shape memory polymer (SMP) and its reinforced composite is proposed in this paper. SMP used in this study is a thermoset styrene-based resin in contrast to normal thermoplastic SMP. In our design, the wing winded on the airframe can be deployed during heating, which provides main lift for a morphing aircraft to realize stable flight. Aerodynamic characteristics of the deployed morphing wing are calculated by using CFD software. The static deformation of the wing under the air loads is also analyzed by using the finite element method. The results show that the used SMP material can provide enough strength and stiffness for the application.

Silver Nanoparticle-Decorated Shape-Memory Polystyrene Sheets as Highly Sensitive Surface-Enhanced Raman Scattering Substrates with a Thermally Inducible Hot Spot Effect.

PubMed

Mengesha, Zebasil Tassew; Yang, Jyisy

2016-11-15

In this study, an active surface-enhanced Raman scattering (SERS) substrate with a thermally inducible hot spot effect for sensitive measurement of Raman-active molecules was successfully fabricated from silver nanoparticle (AgNP)-decorated shape-memory polystyrene (SMP) sheets. To prepare the SERS substrate, SMP sheets were first pretreated with n-octylamine for effective decoration with AgNPs. By varying the formulation and condition of the reduction reaction, AgNP-decorated SMP (Ag@SMP) substrates were successfully prepared with optimized particle gaps to produce inducible hot spot effects on thermal shrink. High-quality SERS spectra were easily obtained with enhancement factors higher than 10 8 by probing with aromatic thiols. Several Ag@SMP substrates produced under different reaction conditions were explored for the creation of inducible hot spot effects. The results indicated that AgNP spacing is crucial for strong hot spot effects. The suitability of Ag@SMP substrates for quantification was also evaluated according to the detection of adenine. Results confirmed that prepared Ag@SMP substrates were highly suitable for quantitative analysis because they yielded an estimated limit of detection as low as 120 pg/cm 2 , a linear range of up to 7 ng/cm 2 , and a regression coefficient (R 2 ) of 0.9959. Ag@SMP substrates were highly reproducible; the average relative standard deviation for all measurements was less than 10%.

On a novel self-regulating shape memory polymer composite

NASA Astrophysics Data System (ADS)

Gao, Fei; Son, Seyul; Park, Kyungmook; Biggs, David; Andrews, Courtney; Mockensturm, Eric M.; Goulbourne, Nakhiah C.

2011-04-01

Polyurethane shape memory polymers (PU-SMPs) are active materials that can be transformed into complex shapes with the ability to recover their original shape even after undergoing large deformations. Because of their light weight, large recoverability, low cost, and high compliance, SMPs can be potentially employed as actuators, MEMS devices, temperature sensors, and damping elements to name a few. One of the key challenges in implementing SMPs is the response time which is limited by the method of heating and cooling and the material. Unlike shape memory alloys, SMPs can be activated by multiple stimuli including lasers, resistive heating, electric fields, and magnetic fields. While these methods may provide an efficient way of heating the SMP, they rely on the slow process of passive conduction for cooling. In this paper, a self regulating SMP (SR-SMP) composite is introduced, whereby a novel heating and cooling system consisting of embedded silica capillary tubes in the SMP (DiAPLEX® MP4510: SMP Technologies, Inc.) has been developed. The tubes are used to pump hot/cold fluid through the SMP membrane and hence provide a local temperature source. In order to show the effectiveness and efficiency of the mechanism, the thermomechanical response of the SR-SMP is compared experimentally to a SMP with "conventional" i.e. global heating and cooling mechanisms. It is shown that the SR-SMP has a faster thermomechanical response. It has been demonstrated previously that soft SMPs can be controlled by an electric field while in the rubbery phase, thus taking advantage of the Maxwell stress or electrostatic stress effect. Thermomechanical characterization of PU-SMPs is described for different weight percentages of resin (Diphenylmethane-4, 4'-diisocyanate) and hardener (1,4-Butanediol). Varying the percent hardener reduced the effective cross-link density of the polymer and hence the thermomechanical properties. The electromechanical response of pure SMP and SR-SMP is predicted numerically. The numerical computation indicates that the softer SMPs (resin:hardener = 5:4, 8:7, and 9:8) could be used as electroactive polymers.

Prospective Comparative Study of the Efficacy and Safety of New-Generation Versus First-Generation System for Super-Mini-Percutaneous Nephrolithotomy: A Revolutionary Approach to Improve Endoscopic Vision and Stone Removal.

PubMed

Zeng, Guohua; Zhu, Wei; Liu, Yang; Fan, Junhong; Lam, Wayne; Lan, Yu; Cai, Chao; Deng, Tuo; Li, Xiaohang; Zhao, Zhijian

2017-11-01

The study sought to compare the procedural and clinical results of super-mini-percutaneous nephrolithotomy (SMP) with the use of first- and new-generation devices. A prospective, comparative cohort study was carried out between February 2013 and January 2017. Patients who underwent either first- or new-generation SMP were eligible for the study. Inclusion criteria were adult patients with renal stone <4 cm, or in pediatric patients with renal stone <2.5 cm with a history of failed extracorporeal shockwave lithotripsy. The primary outcome of the present study was the operating time, which was calculated from the starting of percutaneous puncture to the wound closure. Secondary outcomes were the stone-free rate (SFR), blood loss (hemoglobin decrease), hospital stay, and postoperative complications. One hundred fifty-six consecutive patients who underwent SMP for treatment of renal stones were eligible for the study, with the first 85 patients undergoing SMP with the first-generation device, and the remaining 71 consecutive patients being treated with the new-generation SMP system. The two groups of patients had comparable demographic data, including age, BMI, stone size, Guy's score, stone location, comorbidities, grade of hydronephrosis, and history of urinary tract infection. The new-generation SMP had a shorter operation time (39.3 vs 50.5 min, p = 0.016) and shorter postoperative hospitalization time (2.1 vs 3.0 days, p < 0.001) than the first-generation SMP. No significant difference existed between the two groups for SFR, hemoglobin decrease, and tubeless rate. The overall operative complication rates using the Clavien-Dindo grading system were similar between the two cohorts of patients. The clinical outcomes of the new-generation SMP in patients with moderate-sized renal stone were comparable when compared with the first-generation SMP. New-generation SMP system using an irrigation/suction sheath improved intraoperative irrigation, a more efficient hydrodynamic mechanism for retrieval of fragments. This may account for the shorter operative time than the first-generation SMP system demonstrated in this study.

77 FR 64810 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Senior...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... reports the number of active volunteers, issues and inquiries received, other SMP program outreach... Assistant Secretary for Aging. [FR Doc. 2012-26091 Filed 10-22-12; 8:45 am] BILLING CODE 4154-01-P ...

Preoperative spinal cord damage affects the characteristics and prognosis of segmental motor paralysis after cervical decompression surgery.

PubMed

Ikegami, Shota; Tsutsumimoto, Takahiro; Ohta, Hiroshi; Yui, Mutsuki; Kosaku, Hidemi; Uehara, Masashi; Misawa, Hiromichi

2014-03-15

Retrospective analysis. To test the hypothesis that preoperative spinal cord damage affects postoperative segmental motor paralysis (SMP). SMP is an enigmatic complication after cervical decompression surgery. The cause of this complication remains controversial. We particularly focused on preoperative T2-weighted high signal change (T2HSC) on magnetic resonance imaging in the spinal cord, and assessed the influence of preoperative T2HSC on SMP after cervical decompression surgery. A retrospective review of 181 consecutive patients (130 males and 51 females) who underwent cervical decompression surgery was conducted. SMP was defined as development of postoperative motor palsy of the upper extremities by at least 1 grade in manual muscle testing without impairment of the lower extremities. The relationship between the locations of T2HSC in preoperative magnetic resonance imaging and SMP and Japanese Orthopedic Association score was investigated. Preoperative T2HSC was detected in 78% (142/181) of the patients. SMP occurred in 9% (17/181) of the patients. Preoperative T2HSC was not a significant risk factor for the occurrence of SMP (P = 0.682). However, T2HSC significantly influenced the severity of SMP: the number of paralyzed segments increased with an incidence rate ratio of 2.2 (P = 0.026), the manual muscle score deteriorated with an odds ratio of 8.4 (P = 0.032), and the recovery period was extended with a hazard ratio of 4.0 (P = 0.035). In patients with preoperative T2HSC, Japanese Orthopaedic Association scores remained lower than those in patients without T2HSC throughout the entire period including pre- and postoperative periods (P < 0.001). Preoperative T2HSC was associated with worse severity of SMP in patients who underwent cervical decompression surgery, suggesting that preoperative spinal cord damage is one of the pathomechanisms of SMP after cervical decompression surgery. 3.

Understanding Health Information Seeking on the Internet Among Sexual Minority People: Cross-Sectional Analysis From the Health Information National Trends Survey.

PubMed

Jabson, Jennifer M; Patterson, Joanne G; Kamen, Charles

2017-06-19

Individuals who face barriers to health care are more likely to access the Internet to seek health information. Pervasive stigma and heterosexism in the health care setting are barriers to health care for sexual minority people (SMP, ie, lesbian, gay, and bisexual people); therefore, SMP may be more likely to use the Internet as a source of health information compared to heterosexual people. Currently, there is a dearth of published empirical evidence concerning health information seeking on the Internet among SMP; the current project addresses this gap. Data from the 2015 Health Information National Trends Survey Food and Drug Administration Cycle were used to describe and summarize health information seeking among SMP (n=105) and heterosexual people (n=3405). Almost all of the SMP in this sample reported having access to the Internet (92.4%, 97/105). SMP were equally as likely as heterosexual people to seek health information on the Internet (adjusted odds ratio [aOR] 0.94, 95% CI 0.56-1.66) and to report incidental exposure to health information online (aOR 1.02, 95% CI 0.66-1.60). SMP were 58% more likely to watch a health-related video on YouTube than heterosexual people (aOR 1.58, 95% CI 1.00-2.47). Incidental exposure to health information was associated with seeking health information for oneself (aOR 3.87, 95% CI 1.16-14.13) and for someone else (aOR 6.30, 95% CI 2.40-17.82) among SMP. SMP access the Internet at high rates and seek out health information online. Their incidental exposure could be associated with seeking information for self or others. This suggests that online interventions could be valuable for delivering or promoting health information for SMP. ©Jennifer M Jabson, Joanne G Patterson, Charles Kamen. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 19.06.2017.

Shape memory polymer sensors for tracking cumulative environmental exposure

NASA Astrophysics Data System (ADS)

Snyder, Ryan; Rauscher, Michael; Vining, Ben; Havens, Ernie; Havens, Teresa; McFerran, Jace

2010-04-01

Cornerstone Research Group Inc. (CRG) has developed environmental exposure tracking (EET) sensors using shape memory polymers (SMP) to monitor the degradation of perishable items, such as munitions, foods and beverages, or medicines, by measuring the cumulative exposure to temperature and moisture. SMPs are polymers whose qualities have been altered to give them dynamic shape "memory" properties. Under thermal or moisture stimuli, the SMP exhibits a radical change from a rigid thermoset to a highly flexible, elastomeric state. The dynamic response of the SMP can be tailored to match the degradation profile of the perishable item. SMP-based EET sensors require no digital memory or internal power supply and provide the capability of inexpensive, long-term life cycle monitoring of thermal and moisture exposure over time. This technology was developed through Phase I and Phase II SBIR efforts with the Navy. The emphasis of current research centers on transitioning SMP materials from the lab bench to a production environment. Here, CRG presents the commercialization progress of thermally-activated EET sensors, focusing on fabrication scale-up, process refinements, and quality control. In addition, progress on the development of vapor pressure-responsive SMP (VPR-SMP) will be discussed.

Relationship between soluble microbial products (SMP) and effluent organic matter (EfOM): characterized by fluorescence excitation emission matrix coupled with parallel factor analysis.

PubMed

Yu, Huarong; Qu, Fangshu; Sun, Lianpeng; Liang, Heng; Han, Zhengshuang; Chang, Haiqing; Shao, Senlin; Li, Guibai

2015-02-01

Effluent organic matter (EfOM) originating from wastewater treatment plant (WWTP) is of significant concern, as it not only influences the discharge quality of WWTP but also exerts a significant effect on the efficiency of the downstream advanced treatment facilities. Soluble microbial products (SMP) is a major part of EfOM. In order to further understand the relationship between soluble microbial products (SMP) and EfOM, and in turn, to propose measures for EfOM control, the formation of SMP and EfOM in identical activated sludge sequencing batch reactors (SBR) with different feed water was investigated using fluorescence excitation and emission spectroscopy matrix coupled with parallel factor analysis (EEM-PARAFAC) as well as other organic matter quantification tools. Results showed that EfOM contained not only SMP but also a considerable amount of allochthonous organic matter that derived not merely from natural organic matter (NOM). Four components in EfOM/SMP were identified by EEM-PARAFAC. Tyrosine-like substances in EfOM (Component 3, λex/em=270/316 nm) were mainly originated from utilization associated products (UAP) of SMP. Tryptophan-like substances (Component 2, λex/em=280/336 nm) as well as fulvic-like and humic-like substances in EfOM (Component 1, λex/em=240(290)/392 nm and Component 4, λex/em=260(365)/444 nm) were majorly derived from the refractory substances introduced along with the influent, among which Component 2 was stemmed from sources other than NOM. As solid retention time (SRT) increased, Component 2 and polysaccharides in SMP/EfOM decreased, while Component 4 in SMP increased. Copyright © 2014 Elsevier Ltd. All rights reserved.

A smart mobile pouch as a biomechanical energy harvester towards self-powered smart wireless power transfer applications.

PubMed

Chandrasekhar, Arunkumar; Alluri, Nagamalleswara Rao; Sudhakaran, M S P; Mok, Young Sun; Kim, Sang-Jae

2017-07-20

A Smart Mobile Pouch Triboelectric Nanogenerator (SMP-TENG) is introduced as a promising eco-friendly approach for scavenging biomechanical energy for powering next generation intelligent devices and smart phones. This is a cost-effective and robust method for harvesting energy from human motion, by utilizing worn fabrics as a contact material. The SMP-TENG is capable of harvesting energy in two operational modes: lateral sliding and vertical contact and separation. Moreover, the SMP-TENG can also act as a self-powered emergency flashlight and self-powered pedometer during normal human motion. A wireless power transmission setup integrated with SMP-TENG is demonstrated. This upgrades the traditional energy harvesting device into a self-powered wireless power transfer SMP-TENG. The wirelessly transferred power can be used to charge a Li-ion battery and light LEDs. The SMP-TENG opens a wide range of opportunities in the field of self-powered devices and low maintenance energy harvesting systems for portable and wearable electronic gadgets.

In-Vehicle Safety Advisory And Warning System (Ivsaws), Volume V: Appendices L Through V

DOT National Transportation Integrated Search

1999-09-01

To better understand the environmental factors and their effects on pavement performance, the Long Term Pavement Performance (LTPP) Seasonal Monitoring Program (SMP) was initiated during 1992. Sixty-four LTPP pavement sections were identified to be i...

Removal of anaerobic soluble microbial products in a biological activated carbon reactor.

PubMed

Dong, Xiaojing; Zhou, Weili; He, Shengbing

2013-09-01

The soluble microbial products (SMP) in the biological treatment effluent are generally of great amount and are poorly biodegradable. Focusing on the biodegradation of anaerobic SMP, the biological activated carbon (BAC) was introduced into the anaerobic system. The experiments were conducted in two identical lab-scale up-flow anaerobic sludge blanket (UASB) reactors. The high strength organics were degraded in the first UASB reactor (UASB1) and the second UASB (UASB2, i.e., BAC) functioned as a polishing step to remove SMP produced in UASB1. The results showed that 90% of the SMP could be removed before granular activated carbon was saturated. After the saturation, the SMP removal decreased to 60% on the average. Analysis of granular activated carbon adsorption revealed that the main role of SMP removal in BAC reactor was biodegradation. A strain of SMP-degrading bacteria, which was found highly similar to Klebsiella sp., was isolated, enriched and inoculated back to the BAC reactor. When the influent chemical oxygen demand (COD) was 10,000 mg/L and the organic loading rate achieved 10 kg COD/(m3 x day), the effluent from the BAC reactor could meet the discharge standard without further treatment. Anaerobic BAC reactor inoculated with the isolated Klebsiella was proved to be an effective, cheap and easy technical treatment approach for the removal of SMP in the treatment of easily-degradable wastewater with COD lower than 10,000 mg/L.

Comparative pharmacokinetics of (S)-MP3950, a novel 5-HT4 receptor agonist, in normal and atropine-induced gastrointestinal motility disorders rats.

PubMed

Wang, Binjie; Sun, Xiaoyang; Wang, Shixiao; Guo, Ping; Li, Shujuan; Zhang, Meiyu; Zhao, Longshan; Chen, Xiaohui

2018-08-01

1. (S)-MP3950 is the (S)-enantiomer of active metabolite of mosapride, which exhibits higher 5-HT 4 receptor agonistic effect than mosapride. It shows promise to become a novel drug candidate for the treatment of gastrointestinal motility disorders (GMDs). However, the pharmacokinetic behavior of (S)-MP3950 in the pathological state of GMDs remains unclear. Herein, we investigated the comparative pharmacokinetics of (S)-MP3950 in normal and GMDs rats. 2. The comparative pharmacokinetics of (S)-MP3950 in normal and atropine-induced GMD rats were studied by ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The validated UPLC-MS/MS method was successfully applied to investigate the pharmacokinetic profiles of (S)-MP3950 in normal and atropine-induced GMDs rats. Results showed that comparing to normal rats, C max reduced by 73.8%, AUC 0-t decreased by 57.6% and AUC 0-∞ declined by 56.8% in model rats. Additionally, the elimination half-life (t 1/2 ) and T max were prolonged slightly. 3. The pharmacokinetic results demonstrated that the atropine-induced GMDs reduced the absorption of (S)-MP3950. The pharmacokinetics research in the pathological state might provide more useful information for further study of novel gastric motility candidates.

Decision support system for determining Bantuan Siswa Miskin (BSM) receivers with profile matching method

NASA Astrophysics Data System (ADS)

Situmorang, B. H.; Pibriana, E.; Tosida, E. T.

2018-03-01

Bantuan Siswa Miskin (BSM) is a National Programs aimed at eliminating the barriers of poor students participating to school by helping poor students gain access to appropriate education services, prevent dropping out of school, attract poor students back to school, assis students in providing for learning activities, support the Nine Years Basic Education (and even up to senior high school) program, as well as helping to smooth the school programs [1]. Decision Support System is made by applying Profile Matching method to assist teachers or school operators in SMP PGRI Ciasmara in selecting prospective recipients of BSM program and providing recommendations in decision making. Profile Matching is used to compare the actual data value of a profile to be assessed by the expected profile value, so that it can be known the difference of competence (also called GAP). If the resulting value of GAP is smaller then the weight of value will be greater, which means it has a greater chance to be recommended as a potential recipient of the BSM program. Decision Support System for determining BSM receivers is only choosing the right alternatives to receive BSM according to the BSM quota given to SMP PGRI Ciasmara. The right alternatives to receive this BSM is the highest ranking alternatives.

Evaluating the influence of process parameters on soluble microbial products formation using response surface methodology coupled with grey relational analysis.

PubMed

Xu, Juan; Sheng, Guo-Ping; Luo, Hong-Wei; Fang, Fang; Li, Wen-Wei; Zeng, Raymond J; Tong, Zhong-Hua; Yu, Han-Qing

2011-01-01

Soluble microbial products (SMPs) present a major part of residual chemical oxygen demand (COD) in the effluents from biological wastewater treatment systems, and the SMP formation is greatly influenced by a variety of process parameters. In this study, response surface methodology (RSM) coupled with grey relational analysis (GRA) method was used to evaluate the effects of substrate concentration, temperature, NH(4)(+)-N concentration and aeration rate on the SMP production in batch activated sludge reactors. Carbohydrates were found to be the major component of SMP, and the influential priorities of these factors were: temperature>substrate concentration > aeration rate > NH(4)(+)-N concentration. On the basis of the RSM results, the interactive effects of these factors on the SMP formation were evaluated, and the optimal operating conditions for a minimum SMP production in such a batch activated sludge system also were identified. These results provide useful information about how to control the SMP formation of activated sludge and ensure the bioreactor high-quality effluent. Copyright © 2010 Elsevier Ltd. All rights reserved.

Novel deployable morphing wing based on SMP composite

NASA Astrophysics Data System (ADS)

Yu, Kai; Sun, Shouhua; Liu, Liwu; Zhang, Zhen; Liu, Yanju; Leng, Jinsong

2009-07-01

In this paper, a novel kind of deployable morphing wing base on shape memory polymer (SMP) composite is designed and tested. While the deployment of the morphing wing still relies on the mechanisms to ensure the recovery force and the stability performance, the deploying process tends to be more steady and accurate by the application of SMP composite, which overcomes the inherent drawbacks of the traditional one, such as harmful impact to the flight balance, less accuracy during the deployment and complex mechanical masses. On the other hand, SMP composite is also designed as the wing's filler. During its shape recovery process, SMP composite stuffed in the wing helps to form an aerofoil for the wing and withstand the aerodynamic loads, leading to the compressed aerofoil recovering its original shape. To demonstrate the feasibility and the controllability of the designed deployable morphing wing, primary tests are also conducted, including the deploying speed of the morphing wing and SMP filler as the main testing aspects. Finally, Wing's deformation under the air loads is also analyzed by using the finite element method to validate the flight stability.

Ribosome hijacking: a role for small protein B during trans-translation

PubMed Central

Nonin-Lecomte, Sylvie; Germain-Amiot, Noella; Gillet, Reynald; Hallier, Marc; Ponchon, Luc; Dardel, Frédéric; Felden, Brice

2009-01-01

Tight recognition of codon–anticodon pairings by the ribosome ensures the accuracy and fidelity of protein synthesis. In eubacteria, translational surveillance and ribosome rescue are performed by the ‘tmRNA–SmpB' system (transfer messenger RNA–small protein B). Remarkably, entry and accommodation of aminoacylated-tmRNA into stalled ribosomes occur without a codon–anticodon interaction but in the presence of SmpB. Here, we show that within a stalled ribosome, SmpB interacts with the three universally conserved bases G530, A1492 and A1493 that form the 30S subunit decoding centre, in which canonical codon–anticodon pairing occurs. The footprints at positions A1492 and A1493 of a small decoding centre, as well as on a set of conserved SmpB amino acids, were identified by nuclear magnetic resonance. Mutants at these residues display the same growth defects as for ΔsmpB strains. The SmpB protein has functional and structural similarities with initiation factor 1, and is proposed to be a functional mimic of the pairing between a codon and an anticodon. PMID:19132006

Microfabricated therapeutic actuators and release mechanisms therefor

DOEpatents

Lee, Abraham P.; Fitch, Joseph P.; Schumann, Daniel L.; Da Silva, Luiz; Benett, William J.; Krulevitch, Peter A.

2000-01-01

Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a retaining/release actuator for the delivery of material, such as embolic coils, for example, through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use. The SMP microtubing can be positioned around or within an end of a deposit material. Various heating arrangements can be utilized with the SMP release mechanism, and the SMP microtubing can include a metallic coating for enhanced light absorption.

Crystal Structure of Human Senescence Marker Protein 30: Insights Linking Structural, Enzymatic, and Physiological Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chakraborti, Subhendu; Bahnson, Brian J.

2010-05-25

Human senescence marker protein 30 (SMP30), which functions enzymatically as a lactonase, hydrolyzes various carbohydrate lactones. The penultimate step in vitamin-C biosynthesis is catalyzed by this enzyme in nonprimate mammals. It has also been implicated as an organophosphate hydrolase, with the ability to hydrolyze diisopropyl phosphofluoridate and other nerve agents. SMP30 was originally identified as an aging marker protein, whose expression decreased androgen independently in aging cells. SMP30 is also referred to as regucalcin and has been suggested to have functions in calcium homeostasis. The crystal structure of the human enzyme has been solved from X-ray diffraction data collected tomore » a resolution of 1.4 {angstrom}. The protein has a 6-bladed {beta}-propeller fold, and it contains a single metal ion. Crystal structures have been solved with the metal site bound with either a Ca{sup 2+} or a Zn{sup 2+} atom. The catalytic role of the metal ion has been confirmed by mutagenesis of the metal coordinating residues. Kinetic studies using the substrate gluconolactone showed a k{sub cat} preference of divalent cations in the order Zn{sup 2+} > Mn{sup 2+} > Ca{sup 2+} > Mg{sup 2+}. Notably, the Ca{sup 2+} had a significantly higher value of K{sub d} compared to those of the other metal ions tested (566, 82, 7, and 0.6 {micro}m for Ca{sup 2+}, Mg{sup 2+}, Zn{sup 2+}, and Mn{sup 2+}, respectively), suggesting that the Ca{sup 2+}-bound form may be physiologically relevant for stressed cells with an elevated free calcium level.« less

Efficacy of sulfonamides and Baycox(®) against Isospora suis in experimental infections of suckling piglets.

PubMed

Joachim, Anja; Mundt, Hans-Christian

2011-12-01

Sulfonamide treatment of piglets against neonatal coccidiosis has frequently been suggested in the literature. In order to evaluate the efficacy of sulfonamides against experimental Isospora suis infections in suckling piglets (oral infection with 1,500 sporulated oocysts of I. suis per piglet on the fourth day of life), two trials were conducted. In trial I, oral sulfadimidine (group Sulfa-Oral) was applied in doses of 100 mg/kg of body weight (BW) 1 day before infection and 75 mg/kg BW daily for the following 5 days, and sulfamethoxypyrimidine (SMP) was applied parenterally in daily doses of 75 mg/kg BW for the same time period. In trial II, SMP was applied parenterally in doses of 75 mg/kg BW (a) from the day of infection daily for 7 days (SMP-Standard), (b) for 2 days starting on the day of infection (SMP-Early), (c) for 3 days starting 2 days post-infection (d.p.i.; SMP-Middle), (d) for 2 days starting 5 d.p.i. (SMP-Late), and (e) every other day from the day of infection until 6 d.p.i. (SMP-Alternating), as well as (f) orally in doses of 75 mg/kg BW from the day of infection for 7 days (SMP-Oral). The sulfonamide-treated groups were compared to a toltrazuril-treated group (single oral treatment with Baycox® 5% suspension, 20 mg/kg BW 2 d.p.i.) and to a water-treated Control group. Each group consisted of seven to nine piglets. The parameters evaluated were oocyst excretion and fecal consistency/diarrhea from 4 to 15 d.p.i. Sulfa-Oral, SMP-Early, and SMP-Late had no significant effect in reduction of oocyst excretion and diarrhea, whereas treatment for 3-7 days with SMP reduced both parasite shedding and diarrhea significantly. Oral treatment with SMP was comparable to parenteral application. Baycox® in a single application had the most pronounced effect and completely suppressed oocyst excretion and diarrhea during the examination period. It could be shown that repeated application of sulfonamides, provided that the appropriate time period after infection is covered, can in principle be used to control piglet coccidiosis; however, the amount of work required is considerable, and the practicability is poor. Due to the short half-life of sulfonamides in pigs and the lack of predictability of the time point of infection, an efficient application of sulfonamides to control piglet coccidiosis under field conditions appears unlikely. Baycox®, on the other hand, applied once during the prepatent period of infection, had a lasting effect and can be used to most effectively control I. suis.

Static analysis of the hull plate using the finite element method

NASA Astrophysics Data System (ADS)

Ion, A.

2015-11-01

This paper aims at presenting the static analysis for two levels of a container ship's construction as follows: the first level is at the girder / hull plate and the second level is conducted at the entire strength hull of the vessel. This article will describe the work for the static analysis of a hull plate. We shall use the software package ANSYS Mechanical 14.5. The program is run on a computer with four Intel Xeon X5260 CPU processors at 3.33 GHz, 32 GB memory installed. In terms of software, the shared memory parallel version of ANSYS refers to running ANSYS across multiple cores on a SMP system. The distributed memory parallel version of ANSYS (Distributed ANSYS) refers to running ANSYS across multiple processors on SMP systems or DMP systems.

Effects of milk somatic cell counts on some physicochemical and functional characteristics of skim and whole milk powders.

PubMed

Sert, Durmuş; Mercan, Emin; Aydemir, Serdar; Civelek, Mustafa

2016-07-01

The aim of this work was to study the influence of milk somatic cell count (SCC) levels on spray-dried milk powders. For this reason, 3 cow milks with different SCC (<300,000, 300,000-700,000, >700,000 SCC/mL) were processed into skim (SMP) and whole milk powder (WMP). The effect of SCC on the physicochemical and functional characteristics of the milk powders and textural properties of set-type yogurts produced from reconstituted milk powders with different SCC was evaluated. A crucial difference was noted between milk powders depending on different SCC. Protein values and ash content of powder samples decreased correlatively with increasing SCC. The hydroxymethylfurfural content of SMP was higher than WMP. We noted an increase in hydroxymethylfurfural content of both SMP and WMP depending on elevated SCC. Solubility index of SMP and WMP was 1.280 to 1.632 and 0.940 to 1.208mL, respectively; with increasing SCC, solubility index was affected adversely. The highest foam stability was determined in SMP containing >700,000 SCC. Bulk density of SMP and WMP was between 0.682 and 0.708 and 0.660 to 0.685g/cm(3), respectively. An increase was observed in scorched particle of both SMP and WMP depending on increasing SCC. We found significant differences in particle size distribution of milk powders produced from milk with SCC at different levels. Although WMP had more uniform and big particle structure, SMP had more specific area. A negative correlation was noted between yogurt texture and SCC. Results indicate that milk SCC has negative influences on milk powder quality. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Senescence marker protein-30/superoxide dismutase 1 double knockout mice exhibit increased oxidative stress and hepatic steatosis

PubMed Central

Kondo, Yoshitaka; Masutomi, Hirofumi; Noda, Yoshihiro; Ozawa, Yusuke; Takahashi, Keita; Handa, Setsuko; Maruyama, Naoki; Shimizu, Takahiko; Ishigami, Akihito

2014-01-01

Superoxide dismutase 1 (SOD1) is an antioxidant enzyme that converts superoxide anion radicals into hydrogen peroxide and molecular oxygen. The senescence marker protein-30 (SMP30) is a gluconolactonase that functions as an antioxidant protein in mammals due to its involvement in ascorbic acid (AA) biosynthesis. SMP30 also participates in Ca2+ efflux by activating the calmodulin-dependent Ca2+-pump. To reveal the role of oxidative stress in lipid metabolism defects occurring in non-alcoholic fatty liver disease pathogenesis, we generated SMP30/SOD1-double knockout (SMP30/SOD1-DKO) mice and investigated their survival curves, plasma and hepatic lipid profiles, amounts of hepatic oxidative stress, and hepatic protein levels expressed by genes related to lipid metabolism. While SMP30/SOD1-DKO pups had no growth retardation by 14 days of age, they did have low plasma and hepatic AA levels. Thereafter, 39% and 53% of male and female pups died by 15–24 and 89 days of age, respectively. Compared to wild type, SMP30-KO and SOD1-KO mice, by 14 days SMP30/SOD1-DKO mice exhibited: (1) higher plasma levels of triglyceride and aspartate aminotransferase; (2) severe accumulation of hepatic triglyceride and total cholesterol; (3) higher levels of superoxide anion radicals and thiobarbituric acid reactive substances in livers; and (4) decreased mRNA and protein levels of Apolipoprotein B (ApoB) in livers – ApoB is an essential component of VLDL secretion. These results suggest that high levels of oxidative stress due to concomitant deficiency of SMP30 and/or AA, and SOD1 cause abnormal plasma lipid metabolism, hepatic lipid accumulation and premature death resulting from impaired VLDL secretion. PMID:25003023

Self-Monitoring of Attention versus Self-Monitoring of Performance: Effects on Attention and Academic Performance.

ERIC Educational Resources Information Center

Reid, Robert; Harris, Karen R.

1993-01-01

Twenty-eight students (ages 9-12) with learning disabilities were taught a spelling study procedure (SSP), followed by instruction in self-monitoring of performance (SMP) and self-monitoring of attention (SMA). On-task behavior was significantly higher in both SMA and SMP than in SSP. Neither SMP nor SMA were inherently superior across subjects,…

Multifunctional shape-memory polymers.

PubMed

Behl, Marc; Razzaq, Muhammad Yasar; Lendlein, Andreas

2010-08-17

The thermally-induced shape-memory effect (SME) is the capability of a material to change its shape in a predefined way in response to heat. In shape-memory polymers (SMP) this shape change is the entropy-driven recovery of a mechanical deformation, which was obtained before by application of external stress and was temporarily fixed by formation of physical crosslinks. The high technological significance of SMP becomes apparent in many established products (e.g., packaging materials, assembling devices, textiles, and membranes) and the broad SMP development activities in the field of biomedical as well as aerospace applications (e.g., medical devices or morphing structures for aerospace vehicles). Inspired by the complex and diverse requirements of these applications fundamental research is aiming at multifunctional SMP, in which SME is combined with additional functions and is proceeding rapidly. In this review different concepts for the creation of multifunctionality are derived from the various polymer network architectures of thermally-induced SMP. Multimaterial systems, such as nanocomposites, are described as well as one-component polymer systems, in which independent functions are integrated. Future challenges will be to transfer the concept of multifunctionality to other emerging shape-memory technologies like light-sensitive SMP, reversible shape changing effects or triple-shape polymers.

In vivo tmRNA protection by SmpB and pre-ribosome binding conformation in solution

PubMed Central

Ranaei-Siadat, Ehsan; Mérigoux, Cécile; Seijo, Bili; Ponchon, Luc; Saliou, Jean-Michel; Bernauer, Julie; Sanglier-Cianférani, Sarah; Dardel, Fréderic

2014-01-01

TmRNA is an abundant RNA in bacteria with tRNA and mRNA features. It is specialized in trans-translation, a translation rescuing system. We demonstrate that its partner protein SmpB binds the tRNA-like region (TLD) in vivo and chaperones the fold of the TLD-H2 region. We use an original approach combining the observation of tmRNA degradation pathways in a heterologous system, the analysis of the tmRNA digests by MS and NMR, and co-overproduction assays of tmRNA and SmpB. We study the conformation in solution of tmRNA alone or in complex with one SmpB before ribosome binding using SAXS. Our data show that Mg2+ drives compaction of the RNA structure and that, in the absence of Mg2+, SmpB has a similar effect albeit to a lesser extent. Our results show that tmRNA is intrinsically structured in solution with identical topology to that observed on complexes on ribosomes which should facilitate its subsequent recruitment by the 70S ribosome, free or preloaded with one SmpB molecule. PMID:25135523

In vivo tmRNA protection by SmpB and pre-ribosome binding conformation in solution.

PubMed

Ranaei-Siadat, Ehsan; Mérigoux, Cécile; Seijo, Bili; Ponchon, Luc; Saliou, Jean-Michel; Bernauer, Julie; Sanglier-Cianférani, Sarah; Dardel, Fréderic; Vachette, Patrice; Nonin-Lecomte, Sylvie

2014-10-01

TmRNA is an abundant RNA in bacteria with tRNA and mRNA features. It is specialized in trans-translation, a translation rescuing system. We demonstrate that its partner protein SmpB binds the tRNA-like region (TLD) in vivo and chaperones the fold of the TLD-H2 region. We use an original approach combining the observation of tmRNA degradation pathways in a heterologous system, the analysis of the tmRNA digests by MS and NMR, and co-overproduction assays of tmRNA and SmpB. We study the conformation in solution of tmRNA alone or in complex with one SmpB before ribosome binding using SAXS. Our data show that Mg(2+) drives compaction of the RNA structure and that, in the absence of Mg(2+), SmpB has a similar effect albeit to a lesser extent. Our results show that tmRNA is intrinsically structured in solution with identical topology to that observed on complexes on ribosomes which should facilitate its subsequent recruitment by the 70S ribosome, free or preloaded with one SmpB molecule. © 2014 Ranaei-Siadat et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

Characteristics and fates of soluble microbial products in ceramic membrane bioreactor at various sludge retention times.

PubMed

Shin, Hang-Sik; Kang, Seok-Tae

2003-01-01

The formation and fate of soluble microbial products (SMP) in membrane bioreactor (MBR) was investigated at various sludge retention times (SRT) for 170 days. The SMP concentration was estimated by feeding glucose, which could be completely degraded, and by measuring the dissolved organic carbon (DOC) of the effluent from MBR. Under the conditions of SRT of 20 days, influent DOC of 112 mg/l and HRT of 6 h, the produced SMP was 4.7 mg DOC/l of which 57% was removed or retained by the membrane. DOC of MBR supernatant increased during 100 days and then gradually decreased. Specific UV absorbance showed that the accumulated compounds had a portion of larger, more aromatic, more hydrophobic and double-bond-rich organics, which originated from the decayed biomass. Molecular weight distributions of SMP in MBR supernatant showed that the acclimated microorganisms in a long SRT could decompose high molecular weight organics, it caused the shift of molecular weight distributions of SMP to a lower range. During the operation period, enumeration of active cells in the MBR showed that microbial inhibitions by accumulated SMP was not observed.

Laser-Activated Shape Memory Polymer Microactuator for Thrombus Removal Following Ischemic Stroke: Preliminary In Vitro Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Small, W; Metzger, M F; Wilson, T S

2004-09-23

Due to the narrow (3-hour) treatment window for effective use of the thrombolytic drug recombinant tissue-type plasminogen activator (rt-PA), there is a need to develop alternative treatments for ischemic stroke. We are developing an intravascular device for mechanical thrombus removal using shape memory polymer (SMP). We propose to deliver the SMP microactuator in its secondary straight rod form (length = 4 cm, diameter = 350 {micro}m) through a catheter distal to the vascular occlusion. The microactuator, which is mounted on the end of an optical fiber, is then transformed into its primary corkscrew shape by laser heating (diode laser, {lambda}more » = 800 nm) above its soft phase glass transition temperature (T{sub gs} = 55 C). Once deployed, the microactuator is retracted and the captured thrombus is removed to restore blood flow. The SMP is doped with indocyanine green (ICG) dye to increase absorption of the laser light. Successful deployment of the microactuator depends on the optical properties of the ICG-doped SMP and the optical coupling efficiency of the interface between the optical fiber and the SMP. Spectrophotometry, thermal imaging, and computer simulation aided the initial design effort and continue to be useful tools for optimization of the dye concentration and laser power. Thermomechanical testing was performed to characterize the elastic modulus of the SMP. We have demonstrated laser-activation of the SMP microactuator in air at room temperature, suggesting this concept is a promising therapeutic alternative to rt-PA.« less

Thermal response of novel shape memory polymer-shape memory alloy hybrids

NASA Astrophysics Data System (ADS)

Rossiter, Jonathan; Takashima, Kazuto; Mukai, Toshiharu

2014-03-01

Shape memory polymers (SMP) and shape memory alloys (SMA) have both been proven important smart materials in their own fields. Shape memory polymers can be formed into complex three-dimensional structures and can undergo shape programming and large strain recovery. These are especially important for deployable structures including those for space applications and micro-structures such as stents. Shape memory alloys on the other hand are readily exploitable in a range of applications where simple, silent, light-weight and low-cost repeatable actuation is required. These include servos, valves and mobile robotic artificial muscles. Despite their differences, one important commonality between SMPs and SMAs is that they are both typically activated by thermal energy. Given this common characteristic it is important to consider how these two will behave when in close environmental proximity, and hence exposed to the same thermal stimulus, and when they are incorporated into a hybrid SMA-SMP structure. In this paper we propose and examine the operation of SMA-SMP hybrids. The relationship between the two temperatures Tg, the glass transition temperature of the polymer, and Ta, the nominal austenite to martensite transition temperature of the alloy is considered. We examine how the choice of these two temperatures affects the thermal response of the hybrid. Electrical stimulation of the SMA is also considered as a method not only of actuating the SMA but also of inducing heating in the surrounding polymer, with consequent effects on actuator behaviour. Likewise by varying the rate and degree of thermal stimulation of the SMA significantly different actuation and structural stiffness can be achieved. Novel SMP-SMA hybrid actuators and structures have many ready applications in deployable structures, robotics and tuneable engineering systems.

Soluble microbial products in pilot-scale drinking water biofilters with acetate as sole carbon source.

PubMed

Zhang, Ying; Ye, Chengsong; Gong, Song; Wei, Gu; Yu, Xin; Feng, Lin

2013-04-01

A comprehensive study on formation and characteristics of soluble microbial products (SMP) during drinking water biofiltration was made in four parallel pilot-scale ceramic biofilters with acetate as the substrate. Excellent treatment performance was achieved while microbial biomass and acetate carbon both declined with the depth of filter. The SMP concentration was determined by calculating the difference between the concentration of dissolved organic carbon (DOC), biodegradable dissolved organic carbon (BDOC) and acetate carbon. The results revealed that SMP showed an obvious increase from 0 to 100 cm depth of the filter. A rising specific ultraviolet absorbance (SUVA) was also found, indicating that benzene or carbonyl might exist in these compounds. SMP produced during this drinking water biological process were proved to have weak mutagenicity and were not precursors of by-products of chlorination disinfection. The volatile parts of SMP were half-quantity analyzed and most of them were dicarboxyl acids, others were hydrocarbons or benzene with 16-17 carbon atoms.

Porous inorganic-organic shape memory polymers.

PubMed

Zhang, Dawei; Burkes, William L; Schoener, Cody A; Grunlan, Melissa A

2012-06-21

Thermoresponsive shape memory polymers (SMPs) are a type of stimuli-sensitive materials that switch from a temporary shape back to their permanent shape upon exposure to heat. While the majority of SMPs have been fabricated in the solid form, porous SMP foams exhibit distinct properties and are better suited for certain applications, including some in the biomedical field. Like solid SMPs, SMP foams have been restricted to a limited group of organic polymer systems. In this study, we prepared inorganic-organic SMP foams based on the photochemical cure of a macromer comprised of inorganic polydimethylsiloxane (PDMS) segments and organic poly(ε-caprolactone) (PCL) segments, diacrylated PCL(40)-block-PDMS(37)-block-PCL(40). To achieve tunable pore size with high interconnectivity, the SMP foams were prepared via a refined solvent-casting/particulate-leaching (SCPL) method. By varying design parameters such as degree of salt fusion, macromer concentration in the solvent and salt particle size, the SMP foams with excellent shape memory behavior and tunable pore size, pore morphology, and modulus were obtained.

Mechanical analysis of carbon fiber reinforced shape memory polymer composite for self-deployable structure in space environment

NASA Astrophysics Data System (ADS)

Hong, Seok Bin; Ahn, Yong San; Jang, Joon Hyeok; Kim, Jin-Gyun; Goo, Nam Seo; Yu, Woong-Ryeol

2016-04-01

Shape memory polymer (SMP) is one of smart polymers which exhibit shape memory effect upon external stimuli. Reinforcements as carbon fiber had been used for making shape memory polymer composite (CF-SMPC). This study investigated a possibility of designing self-deployable structures in harsh space condition using CF-SMPCs and analyzed their shape memory behaviors with constitutive equation model.CF-SMPCs were prepared using woven carbon fabrics and a thermoset epoxy based SMP to obtain their basic mechanical properties including actuation in harsh environment. The mechanical and shape memory properties of SMP and CF-SMPCs were characterized using dynamic mechanical analysis (DMA) and universal tensile machine (UTM) with an environmental chamber. The mechanical properties such as flexural strength and tensile strength of SMP and CF-SMPC were measured with simple tensile/bending test and time dependent shape memory behavior was characterized with designed shape memory bending test. For mechanical analysis of CF-SMPCs, a 3D constitutive equation of SMP, which had been developed using multiplicative decomposition of the deformation gradient and shape memory strains, was used with material parameters determined from CF-SMPCs. Carbon fibers in composites reinforced tensile and flexural strength of SMP and acted as strong elastic springs in rheology based equation models. The actuation behavior of SMP matrix and CF-SMPCs was then simulated as 3D shape memory bending cases. Fiber bundle property was imbued with shell model for more precise analysis and it would be used for prediction of deploying behavior in self-deployable hinge structure.

Assessment of vertical soil solid phase transport (pedoturbations) in different types of land use by magnetic tracer method (Belgorod region, Russia)

NASA Astrophysics Data System (ADS)

Zhidkin, Andrey

2015-04-01

New method of quantitative assessments of vertical soil solid phase transport (pedoturbations) is based on redistribution of spherical magnetic particles (SMP) in soil profiles. SMP - are fly ash components, which mainly produce during coal burning. The main sources of SMP on studied object were locomotives on the railroads, which used coal at the turn of the XIX century. SMP income into the soil only from the atmosphere, very stable for destructions, can be preserved in soils for centuries, and have the same size and weight as the soil matter. So SMP redistribution reflects soil solid phase transport. SMP used as tracers of soil erosion (Olson et.al., 2013), but for the first time applied for quantitative assessments of pedoturbations. In Belgorod region of Russia studied vertical distribution of SMP in soils in different types of land use: a) arable chernozem about 160-year plowing, b) arable chernozem 120-year plowing, c) dark-gray forest soil, which didn't plow at least last 150 years. All three sites are located nearby for the same physical-geography conditions. Distribution of SMP studied layer by layer (thickness of the layer 7 cm) from the top to 70 cm depth, in triplicate soil columns in every land use type (totally 90 soil samples). The period of SMP kept in studied soils is about 115 years. Revealed the different depth of SMP penetration (burial) in soil profiles for this period: 49 cm in the soil of 160-year arable land, 58 cm in the soil of 120-year arable land and 68 cm in the virgin forest soil. Different depth of SMP penetration is connected with different activity of pedoturbations, which differs according to the composition of soil flora and fauna, root activity, and animal mixing work. It is supposed that in the arable land single cropping can reduce the thickness of the active layer and as a result the zone of active pedoturbation depth. Based on SMP distribution counted rates of vertical soil solid phase transport, which are equaled: 31 t/ha/year in the soil of 160-year arable land, 28 t/ha/year in the soil of 120-year arable land, 24 t/ha/year in the virgin forest soil. Certainly raised rates of vertical transport in arable land relative to forest is connected with agricultural plowing. Revealed the connection between the period of plowing and rates of vertical soil transport. Also worth noting is that the rates of pedoturbation in virgin forest soils are rather high and only 1,2-1,3 times less than on arable land uses. This research is funded by Russian Foundation for Basic Research - Project 14-05-31141. 1. Olson K.R., Gennadiyev A.N., Zhidkin A.P., Markelov M.V., Golosov V.N., Lang J.M. Use of magnetic tracer and radio-cesium methods to determine past cropland soil erosion amounts and rates // Catena. - 2013. - V. 104 - P. 103-110.

First measurements of the scope for growth (SFG) in mussels from a large scale survey in the North-Atlantic Spanish coast.

PubMed

Albentosa, Marina; Viñas, Lucía; Besada, Victoria; Franco, Angeles; González-Quijano, Amelia

2012-10-01

SFG and physiological rates were measured in wild mussels from the Spanish Marine Pollution monitoring program (SMP) in order to determine seawater quality. It consists of 41 stations, covering almost 2500 km of coast, making the SMP the widest-ranging monitoring network in the Iberian Peninsula's Atlantic region. Results of the 2007 and 2008 surveys when 39 sites were sampled: (20 in 2007 and 19 in 2008, being 8 sites sampled both years) were presented. Chemical analyses were carried out to determine the relationships between physiological rates and the accumulation of toxic compounds. Data presented are the first to become available on the use of SFG as a biomarker of the marine environment on a large spatial scale (>1000 km) along Spain's Atlantic seaboard. SFG values enable significant differences to be established between the areas sampled and between the two years surveyed. The integration of biological and chemical data suggests that certain organochlorine compounds, namely chlordanes and DDTs, may have a negative effect on SFG, although such an effect is of a lesser magnitude than that associated with certain biological parameters such as condition index and mussel age. These variables act as confounding factors when attempting to determine the effect of chemical compounds present in the marine environment on mussel SFG. Further research is therefore needed on the relation between these confounding factors and SFG in order to apply the relevant corrective strategies to enable this index to be used in monitoring programs. The effect of these confounding factors is more clearly revealed in studies that cover a wide-ranging spatial and time scale, such as those carried out within the SMP. These results do not invalidate the use of biological data in monitoring programs, but rather point to the need to analyze all the factors affecting each biological process. Copyright © 2012 Elsevier B.V. All rights reserved.

The Effect of a State Department of Education Teacher Mentor Initiative on Science Achievement

NASA Astrophysics Data System (ADS)

Pruitt, Stephen L.

This study analyzed a state department of education's ability to have actual influence over the improvement of science achievement and proficiency by having direct relationships with science teachers in Georgia's lowest performing schools. The study employed a mixed ANOVA analysis of the mean scale scores and proficiency rates of the science portion of the Georgia High School Graduation Test (GHSGT) for the years 2004 through 2007 to determine if the intervention by the Science Mentor Program (SMP) had significant effect on the science achievement and proficiency within the cohort of schools, as compared to a set of schools receiving no intervention, on various subgroups within the schools, and on various levels of intervention within the SMP. All data used in this study are available to the public through the Georgia Department of Education (GaDOE). SMP schools were selected based on their level of intervention for three consecutive years. Non-SMP schools were selected based on demographic similarities in economically disadvantaged, white, African-American, and students with disabilities to ensure a match of pairings for analyses. The results of this study showed significant improvement of scale scores and proficiency rates between 2004 and 2007. The study showed significant increases in all schools regardless of treatment. The study also showed significant differences in performance within the subgroups. Males, white, non-Economically Disadvantaged, and regular education students were all found to have significantly better performance in both achievement and proficiency rate. Economically Disadvantaged students were found to have a significant difference with regard to treatment groups. There was a significant difference between the mean scale score and proficiency rates of Economically Disadvantaged students in schools receiving high-intervention and schools receiving no-intervention. Further analysis showed that the only significant difference was in 2004, the year prior to implementation. Results indicate while the high-intervention schools did perform lower over all four years, they were not significantly different during the time of treatment indicating high-intervention schools performed at levels equivalent to schools receiving no-intervention. This study provided evidence of the success of a specific intervention by a state education agency to improve science education for the practicing teacher and its role in improving student science achievement. It will be used by policymakers to determine future activities and potential funding of other such programs. This also has a potential for national use as it is the only program of this nature operated by a department of education in the country.

Reduction of SR Ca2+ leak and arrhythmogenic cellular correlates by SMP-114, a novel CaMKII inhibitor with oral bioavailability.

PubMed

Neef, Stefan; Mann, Christian; Zwenger, Anne; Dybkova, Nataliya; Maier, Lars S

2017-07-01

Sarcoplasmic reticulum (SR) Ca 2+ leak induced by Ca 2+ /calmodulin-dependent protein kinase II (CaMKII) is centrally involved in atrial and ventricular arrhythmogenesis as well as heart failure remodeling. Consequently, treating SR Ca 2+ leak has been proposed as a novel therapeutic paradigm, but compounds for use in humans are lacking. SMP-114 ("Rimacalib") is a novel, orally available CaMKII inhibitor developed for human use that has already entered clinical phase II trials to treat rheumatoid arthritis. We speculated that SMP-114 might also be useful to treat cardiac SR Ca 2+ leak. SMP-114 significantly reduces SR Ca 2+ leak (as assessed by Ca 2+ sparks) in human atrial (0.72 ± 0.33 sparks/100 µm/s vs. control 3.02 ± 0.91 sparks/100 µm/s) and failing left ventricular (0.78 ± 0.23 vs. 1.69 ± 0.27 sparks/100 µm/s) as well as in murine ventricular cardiomyocytes (0.30 ± 0.07 vs. 1.50 ± 0.28 sparks/100 µm/s). Associated with lower SR Ca 2+ leak, we found that SMP-114 suppressed the occurrence of spontaneous arrhythmogenic spontaneous Ca 2+ release (0.356 ± 0.109 vs. 0.927 ± 0.216 events per 30 s stimulation cessation). In consequence, post-rest potentiation of Ca 2+ -transient amplitude (measured using Fura-2) during the 30 s pause was improved by SMP-114 (52 ± 5 vs. 37 ± 4%). Noteworthy, SMP-114 has these beneficial effects without negatively impairing global excitation-contraction coupling: neither systolic Ca 2+ release nor single cell contractility was compromised, and also SR Ca 2+ reuptake, in line with resulting cardiomyocyte relaxation, was not impaired by SMP-114 in our assays. SMP-114 demonstrated potential to treat SR Ca 2+ leak and consequently proarrhythmogenic events in rodent as well as in human atrial cardiomyocytes and cardiomyocytes from patients with heart failure. Further research is necessary towards clinical use in cardiac disease.

Ascorbate promotes carbon tetrachloride-induced hepatic injury in senescence marker protein 30-deficient mice by enhancing inflammation.

PubMed

Ki, Mi-Ran; Lee, Hye-Rim; Park, Jin-Kyu; Hong, Il-Hwa; Han, Seon-Young; You, Sang-Young; Lee, Eun-Mi; Kim, Ah-Young; Lee, Seung-Sook; Jeong, Kyu-Shik

2011-06-01

The genetic deletion of the senescence marker protein 30 (SMP30) gene results in ascorbate deficiency and the premature aging processes in mice. Apparent liver injury of SMP30(-/-) mice was less severe than those of wild type (WT) mice, upon chronic CCl(4) injection. The purpose of this study was to investigate the pathophysiology underlying the mild CCl(4) toxicity in SMP30(-/-) mice. Along with the lower level of serum alanine aminotransferase, the livers of SMP30(-/-) mice revealed a lesser glycogen depletion, a decrease in c-Jun N-terminal kinase (JNK)-mediated inflammatory signaling in parallel with tumor necrosis factor-alpha and interleukin-1 beta, inducible nitric oxide synthase and glutathione peroxidase, and the lower lipid peroxidation as compared to those of WT mice. CCl(4)-induced proliferation, measured by the expression of proliferating cell nuclear antigen, was low in SMP30(-/-) mice as compared with that of WT mice whereas the levels of p21 and Bax were comparable to those of the CCl(4)-treated WT mice. Moreover, CCl(4) toxicity in ascorbate-fed SMP30(-/-) mice was comparable to that of the CCl(4)-alone treated WT mice, accompanied by an increase in the above mentioned factors. Conversely, ascorbate partly compensated for the CCl(4)-induced oxidative stress in WT mice, indicating that sufficient ascorbate may be required for an antioxidant function under severe levels of oxidative stress. Our data suggest that the restoration of ascorbate-deficiency reverses a sluggish immune system into an activated condition by an increase in JNK-mediated inflammation and free radical cascade; thus leading to accelerated hepatic damage in SMP30(-/-) mice. Copyright © 2011 Elsevier Inc. All rights reserved.

AGARD/SMP Review Damage Tolerance for Engine Structures. 3. Component Behaviour and Life Management

DTIC Science & Technology

1990-06-01

Life Management (Revue AGARD/SMP - ToIrance aux Dommages pour les Composants de Moteurs 3. Le Comportement des Composants et la Gestion %𔄀 de Leur Dur...Structures 3. Component Behaviour and Life Management . (Revue AGARD/SMP - ToI~rance aux Dommages pour les Compos ants de Moteurs 3. Le Comportement...engine parts. The present report includes the papers presented during Workshop Ill which was devoted to Component Behaviour and Life Management . It also

The corrosion mechanism of the sintered (Ce, Nd)-Fe-B magnets prepared by double main phase and single main phase approaches

NASA Astrophysics Data System (ADS)

Shi, Xiaoning; Zhu, Minggang; Zhou, Dong; Song, Liwei; Guo, Zhaohui; Li, Jia; Li, Wei

2018-05-01

The sintered (Ce, Nd)-Fe-B magnets were produced widely by Double Main Phase (DMP) method in China as the magnetic properties of the DMP magnets are superior to those of single main phase (SMP) magnets with the same nominal composition. In this work, the microstructure and corrosion mechanism of the sintered (Ce0.2Nd0.8)30FebalB (wt.%) magnets prepared by DMP and SMP method were studied in detail. Compared to SMP magnets, the DMP magnets have more positive corrosion potential, lower corrosion current density, larger electron transfer resistance, and lower mass loss of the free corrosion experiment in 0.5mol/l Na2SO4 aqueous solution. All of the results show that the DMP magnets have better corrosion resistance than SMP magnets. The back scattered electron images show that the crystalline grains of the DMP magnets are sphericity with a smooth surface while the SMP ones have plenty of edges and corners. Besides, the distribution of Ce/Nd is much more uneven in both magnetic phase and rare earth (Re)-rich phase of the DMP magnets than those of SMP magnets. After corrosion, DMP magnets show eroded magnetic phase and intact Re-rich phase, which indicate that galvanic corrosion of the Re-rich phase acting as the cathode appears.

Schistosoma egg-induced liver pathology resolution by Sm-p80-based schistosomiasis vaccine in baboons.

PubMed

Le, Loc; Molehin, Adebayo J; Nash, Stewart; Sennoune, Souad R; Ahmad, Gul; Torben, Workineh; Zhang, Weidong; Siddiqui, Afzal A

2018-05-05

Schistosomiasis remains a serious chronic debilitating hepato-intestinal disease. Current control measures based on mass drug administration are inadequate due to sustained re-infection rates, low treatment coverage and emergence of drug resistance. Hence, there is an urgent need for a schistosomiasis vaccine for disease control. In this study, we assessed the anti-pathology efficacy of Schistosoma mansoni large subunit of calpain (Sm-p80)-based vaccine against schistosomiasis caused by infections with Schistosoma mansoni in baboons. We also evaluated the disease transmission-blocking potential of Sm-p80 vaccine. Immunisations with Sm-p80-based vaccine resulted in significant reduction of hepatic egg load in vaccinated baboons (67.7% reduction, p = 0.0032) when compared to the control animals, indicative of reduction in pathology. There was also a significant reduction in sizes of egg-induced granulomas in baboons immunised with Sm-p80 vaccine compared to their control counterparts. Egg hatching rate analysis revealed an overall 85.6% reduction (p = 0.0018) in vaccinated animals compared to the controls, highlighting the potential role of Sm-p80 vaccine in disease transmission. The findings on anti-pathology efficacy and transmission-blocking potential presented in this study have formed the basis for a large-scale double-blinded baboon experiment that is currently underway. Copyright © 2018 Royal College of Pathologists of Australasia. Published by Elsevier B.V. All rights reserved.

Sm-p80-Based Schistosomiasis Vaccine: Preparation for Human Clinical Trials.

PubMed

Siddiqui, Afzal A; Siddiqui, Sabrina Z

2017-03-01

Mass antiparasitic drug administration programs and other control strategies have made important contributions in reducing the global prevalence of helminths. Schistosomiasis, however, continues to spread to new geographic areas. The advent of a viable vaccine and its deployment, coupled with existing control efforts, is expected to make significant headway towards sustained schistosomiasis control. In 2016, Science ranked the schistosomiasis vaccine as one of the top 10 vaccines that needs to be urgently developed. A vaccine that is effective against geographically distinct forms of intestinal/hepatic and urinary disease is essential to make a meaningful impact in global reduction of the disease burden. In this opinion article, we focus on salient features of schistosomiasis vaccines in different phases of the clinical development pipeline and highlight the Sm-p80-based vaccine which is now being prepared for human clinical trials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Prime-boost and recombinant protein vaccination strategies using Sm-p80 protects against Schistosoma mansoni infection in the mouse model to levels previously attainable only by the irradiated cercarial vaccine

PubMed Central

Ahmad, Gul; Zhang, Weidong; Torben, Workineh; Haskins, Chad; Diggs, Sue; Noor, Zahid; Le, Loc

2009-01-01

Advent of an effective schistosome vaccine would contribute significantly toward reducing the disease spectrum and transmission of schistosomiasis. We have targeted a functionally important antigen, Sm-p80, as a vaccine candidate because of its consistent immunogenicity, protective and antifecundity potentials, and important role in the immune evasion process. In this study, we report that using two vaccination approaches (prime boost and recombinant protein), Sm-p80-based vaccine formulation(s) confer up to 70% reduction in worm burden in mice. Animals immunized with the vaccine exhibited a decrease in egg production by up to 75%. The vaccine elicited strong immune responses that included IgM, IgA, and IgG (IgG1, IgG2a, IgG2b, and IgG3) in vaccinated animals. Splenocytes proliferated in response to Sm-p80 produced Th1 and Th17 response enhancing cytokines. These results again emphasize the potential of Sm-p80 as a viable vaccine candidate for schistosomiasis. PMID:19809833

Ribosome hijacking: a role for small protein B during trans-translation.

PubMed

Nonin-Lecomte, Sylvie; Germain-Amiot, Noella; Gillet, Reynald; Hallier, Marc; Ponchon, Luc; Dardel, Frédéric; Felden, Brice

2009-02-01

Tight recognition of codon-anticodon pairings by the ribosome ensures the accuracy and fidelity of protein synthesis. In eubacteria, translational surveillance and ribosome rescue are performed by the 'tmRNA-SmpB' system (transfer messenger RNA-small protein B). Remarkably, entry and accommodation of aminoacylated-tmRNA into stalled ribosomes occur without a codon-anticodon interaction but in the presence of SmpB. Here, we show that within a stalled ribosome, SmpB interacts with the three universally conserved bases G530, A1492 and A1493 that form the 30S subunit decoding centre, in which canonical codon-anticodon pairing occurs. The footprints at positions A1492 and A1493 of a small decoding centre, as well as on a set of conserved SmpB amino acids, were identified by nuclear magnetic resonance. Mutants at these residues display the same growth defects as for DeltasmpB strains. The SmpB protein has functional and structural similarities with initiation factor 1, and is proposed to be a functional mimic of the pairing between a codon and an anticodon.

Shape forming by thermal expansion mismatch and shape memory locking in polymer/elastomer laminates

NASA Astrophysics Data System (ADS)

Yuan, Chao; Ding, Zhen; Wang, T. J.; Dunn, Martin L.; Qi, H. Jerry

2017-10-01

This paper studies a novel method to fabricate three-dimensional (3D) structure from 2D thermo-responsive shape memory polymer (SMP)/elastomer bilayer laminate. In this method, the shape change is actuated by the thermal mismatch strain between the SMP and the elastomer layers upon heating. However, the glass transition behavior of the SMP locks the material into a new 3D shape that is stable even upon cooling. Therefore, the second shape becomes a new permanent shape of the laminate. A theoretical model that accounts for the temperature-dependent thermomechanical behavior of the SMP material and thermal mismatch strain between the two layers is developed to better understand the underlying physics. Model predictions and experiments show good agreement and indicate that the theoretical model can well predict the bending behavior of the bilayer laminate. The model is then used in the optimal design of geometrical configuration and material selection. The latter also illustrates the requirement of thermomechanical behaviors of the SMP to lock the shape. Based on the fundamental understandings, several self-folding structures are demonstrated by the bilayer laminate design.

77 FR 21404 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... Structural Inspection Document (SSID), SMP 515-C-SSID, Change 1, dated September 10, 2010 (``the SSID... programs. The SSID can be used to show compliance for the baseline inspections for section 121.1109(c)(1) of the Aging Airplane Safety Rule (section 121.1109(c)(1) of the Federal Aviation Regulations (14 CFR...

Adaptive, Active and Multifunctional Composite and Hybrid Materials Program: Composite and Hybrid Materials ERA

DTIC Science & Technology

2014-04-01

Microvascular Self - Healing Composites Mechanical Evaluation ................................................................................11...Thermoplastic SMP Foam Microstructure- Mechanical Stress-Strain Relationships 2.2.2 Microvascular Self - Healing Composites Mechanical Evaluation 2.3.1 Z...materials, and embedded sensory and circulatory systems. Damage repair of torn or injured tissue was demonstrated by the use of self - healing polymer

Social marketing of contraceptives in Bangladesh.

PubMed

Schellstede, W P; Ciszewski, R L

1984-01-01

Since 1975 there has been a family planning program operating in Bangladesh which advertises and commercially distributes contraceptive products in both rural and urban areas throughout the country. The program, known as the Social Marketing Project (SMP) and managed by Population Services International (PSI), now serves almost 1 million acceptors per month at an annual cost per couple of less than US$6.50, including the cost of donated contraceptives. This paper looks at the evolution of the project and its growth through the years, and addresses some primary concerns of planners of social marketing programs.

Solitary morphea profunda following trauma sustained in an automobile accident.

PubMed

Touloei, Khasha; Wiener, Adam; Glick, Bradley P

2015-01-01

Solitary morphea profunda (SMP) is a variant of localized scleroderma (LS). We report the case of a 50-year-old white woman with a history of trauma sustained in an automobile accident who presented with SMP on the right upper arm. We also provide a review of the classification, epidemiology, etiology, diagnostic studies, pathogenesis, physical findings, histopathology, treatment, and prognosis of SMP, along with other important details pertaining to the disease. We also provide a brief overview of LS and morphea profunda (MP).

Synergies between RNA degradation and trans-translation in Streptococcus pneumoniae: cross regulation and co-transcription of RNase R and SmpB

PubMed Central

2012-01-01

Background Ribonuclease R (RNase R) is an exoribonuclease that recognizes and degrades a wide range of RNA molecules. It is a stress-induced protein shown to be important for the establishment of virulence in several pathogenic bacteria. RNase R has also been implicated in the trans-translation process. Transfer-messenger RNA (tmRNA/SsrA RNA) and SmpB are the main effectors of trans-translation, an RNA and protein quality control system that resolves challenges associated with stalled ribosomes on non-stop mRNAs. Trans-translation has also been associated with deficiencies in stress-response mechanisms and pathogenicity. Results In this work we study the expression of RNase R in the human pathogen Streptococcus pneumoniae and analyse the interplay of this enzyme with the main components of the trans-translation machinery (SmpB and tmRNA/SsrA). We show that RNase R is induced after a 37°C to 15°C temperature downshift and that its levels are dependent on SmpB. On the other hand, our results revealed a strong accumulation of the smpB transcript in the absence of RNase R at 15°C. Transcriptional analysis of the S. pneumoniae rnr gene demonstrated that it is co-transcribed with the flanking genes, secG and smpB. Transcription of these genes is driven from a promoter upstream of secG and the transcript is processed to yield mature independent mRNAs. This genetic organization seems to be a common feature of Gram positive bacteria, and the biological significance of this gene cluster is further discussed. Conclusions This study unravels an additional contribution of RNase R to the trans-translation system by demonstrating that smpB is regulated by this exoribonuclease. RNase R in turn, is shown to be under the control of SmpB. These proteins are therefore mutually dependent and cross-regulated. The data presented here shed light on the interactions between RNase R, trans-translation and cold-shock response in an important human pathogen. PMID:23167513

An electrical-heating and self-sensing shape memory polymer composite incorporated with carbon fiber felt

NASA Astrophysics Data System (ADS)

Gong, Xiaobo; Liu, Liwu; Liu, Yanju; Leng, Jinsong

2016-03-01

Shape memory polymers (SMPs) have the ability to adjust their stiffness, lock a temporary shape, and recover the permanent shape upon imposing an appropriate stimulus. They have found their way into the field of morphing structures. The electrically Joule resistive heating of the conductive composite can be a desirable stimulus to activate the shape memory effect of SMPs without external heating equipment. Electro-induced SMP composites incorporated with carbon fiber felt (CFF) were explored in this work. The CFF is an excellent conductive filler which can easily spread throughout the composite. It has a huge advantage in terms of low cost, simple manufacturing process, and uniform and tunable temperature distribution while heating. A continuous and compact conductive network made of carbon fibers and the overlap joints among them was observed from the microscopy images, and this network contributes to the high conductive properties of the CFF/SMP composites. The CFF/SMP composites can be electrical-heated rapidly and uniformly, and its’ shape recovery effect can be actuated by the electrical resistance Joule heating of the CFF without an external heater. The CFF/SMP composite get higher modulus and higher strength than the pure SMP without losing any strain recovery property. The high dependence of temperature and strain on the electrical resistance also make the composite a good self-sensing material. In general, the CFF/SMP composite shows great prospects as a potential material for the future morphing structures.

Fabrication and in vitro deployment of a laser-activated shape memory polymer vascular stent

PubMed Central

Baer, Géraldine M; Small, Ward; Wilson, Thomas S; Benett, William J; Matthews, Dennis L; Hartman, Jonathan; Maitland, Duncan J

2007-01-01

Background Vascular stents are small tubular scaffolds used in the treatment of arterial stenosis (narrowing of the vessel). Most vascular stents are metallic and are deployed either by balloon expansion or by self-expansion. A shape memory polymer (SMP) stent may enhance flexibility, compliance, and drug elution compared to its current metallic counterparts. The purpose of this study was to describe the fabrication of a laser-activated SMP stent and demonstrate photothermal expansion of the stent in an in vitro artery model. Methods A novel SMP stent was fabricated from thermoplastic polyurethane. A solid SMP tube formed by dip coating a stainless steel pin was laser-etched to create the mesh pattern of the finished stent. The stent was crimped over a fiber-optic cylindrical light diffuser coupled to an infrared diode laser. Photothermal actuation of the stent was performed in a water-filled mock artery. Results At a physiological flow rate, the stent did not fully expand at the maximum laser power (8.6 W) due to convective cooling. However, under zero flow, simulating the technique of endovascular flow occlusion, complete laser actuation was achieved in the mock artery at a laser power of ~8 W. Conclusion We have shown the design and fabrication of an SMP stent and a means of light delivery for photothermal actuation. Though further studies are required to optimize the device and assess thermal tissue damage, photothermal actuation of the SMP stent was demonstrated. PMID:18042294

Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material.

PubMed

Yang, Yang; Chen, Yonghua; Li, Yingtian; Chen, Michael Z Q; Wei, Ying

2017-06-01

In this article, we have proposed a novel robotic finger design principle aimed to address two challenges in soft pneumatic grippers-the controllability of the stiffness and the controllability of the bending position. The proposed finger design is composed of a 3D printed multimaterial substrate and a soft pneumatic actuator. The substrate has four polylactic acid (PLA) segments interlocked with three shape memory polymer (SMP) joints, inspired by bones and joints in human fingers. By controlling the thermal energy of an SMP joint, the stiffness of the joints is modulated due to the dramatic change in SMP elastic modulus around its glass transition temperature (T g ). When SMP joints are heated above T g , they exhibit very small stiffness, allowing the finger to easily bend around the SMP joints if the attached soft actuator is actuated. When there is no force from the soft actuator, shape recovery stress in SMP contributes to the finger's shape restoration. Since each joint's rotation can be individually controlled, the position control of the finger is made possible. Experimental analysis has been conducted to show the finger's variable stiffness and the result is compared with the analytical values. It is found that the stiffness ratio can be 24.9 times for a joint at room temperature (20°C) and at an elevated temperature of 60°C when air pressure p of the soft actuator is turned off. Finally, a gripper composed of two fingers is fabricated for demonstration.

Mechanical and Infrared Thermography Analysis of Shape Memory Polyurethane

NASA Astrophysics Data System (ADS)

Pieczyska, Elzbieta Alicja; Maj, Michal; Kowalczyk-Gajewska, Katarzyna; Staszczak, Maria; Urbanski, Leszek; Tobushi, Hisaaki; Hayashi, Shunichi; Cristea, Mariana

2014-07-01

Multifunctional new material—polyurethane shape memory polymer (PU-SMP)—was subjected to tension carried out at room temperature at various strain rates. The influence of effects of thermomechanical couplings on the SMP mechanical properties was studied, based on the sample temperature changes, measured by a fast and sensitive infrared camera. It was found that the polymer deformation process strongly depends on the strain rate applied. The initial reversible strain is accompanied by a small drop in temperature, called thermoelastic effect. Its maximal value is related to the SMP yield point and increases upon increase of the strain rate. At higher strains, the stress and temperature significantly increase, caused by reorientation of the polymer molecular chains, followed by the stress drop and its subsequent increase accompanying the sample rupture. The higher strain rate, the higher stress, and temperature changes were obtained, since the deformation process was more dynamic and has occurred in almost adiabatic conditions. The constitutive model of SMP valid in finite strain regime was developed. In the proposed approach, SMP is described as a two-phase material composed of hyperelastic rubbery phase and elastic-viscoplastic glassy phase, while the volume content of phases is specified by the current temperature.

Micro devices using shape memory polymer patches for mated connections

DOEpatents

Lee, Abraham P.; Fitch, Joseph P.

2000-01-01

A method and micro device for repositioning or retrieving miniature devices located in inaccessible areas, such as medical devices (e.g., stents, embolic coils, etc.) located in a blood vessel. The micro repositioning or retrieving device and method uses shape memory polymer (SMP) patches formed into mating geometries (e.g., a hoop and a hook) for re-attachment of the deposited medical device to a catheter or guidewire. For example, SMP or other material hoops are formed on the medical device to be deposited in a blood vessel, and SMP hooks are formed on the micro device attached to a guidewire, whereby the hooks on the micro device attach to the hoops on the medical device, or vice versa, enabling deposition, movement, re-deposit, or retrieval of the medical device. By changing the temperature of the SMP hooks, the hooks can be attached to or released from the hoops located on the medical device. An exemplary method for forming the hooks and hoops involves depositing a sacrificial thin film on a substrate, patterning and processing the thin film to form openings therethrough, depositing or bonding SMP materials in the openings so as to be attached to the substrate, and removing the sacrificial thin film.

Self-fitting shape memory polymer foam inducing bone regeneration: A rabbit femoral defect study.

PubMed

Xie, Ruiqi; Hu, Jinlian; Hoffmann, Oskar; Zhang, Yuanchi; Ng, Frankie; Qin, Tingwu; Guo, Xia

2018-04-01

Although tissue engineering has been attracted greatly for healing of critical-sized bone defects, great efforts for improvement are still being made in scaffold design. In particular, bone regeneration would be enhanced if a scaffold precisely matches the contour of bone defects, especially if it could be implanted into the human body conveniently and safely. In this study, polyurethane/hydroxyapatite-based shape memory polymer (SMP) foam was fabricated as a scaffold substrate to facilitate bone regeneration. The minimally invasive delivery and the self-fitting behavior of the SMP foam were systematically evaluated to demonstrate its feasibility in the treatment of bone defects in vivo. Results showed that the SMP foam could be conveniently implanted into bone defects with a compact shape. Subsequently, it self-matched the boundary of bone defects upon shape-recovery activation in vivo. Micro-computed tomography determined that bone ingrowth initiated at the periphery of the SMP foam with a constant decrease towards the inside. Successful vascularization and bone remodeling were also demonstrated by histological analysis. Thus, our results indicate that the SMP foam demonstrated great potential for bone regeneration. Copyright © 2018 Elsevier B.V. All rights reserved.

Negative soil moisture-precipitation feedback in dry and wet regions.

PubMed

Yang, Lingbin; Sun, Guoqing; Zhi, Lu; Zhao, Jianjun

2018-03-05

Soil moisture-precipitation (SM-P) feedback significantly influences the terrestrial water and energy cycles. However, the sign of the feedback and the associated physical mechanism have been debated, leaving a research gap regarding global water and climate changes. Based on Koster's framework, we estimate SM-P feedback using satellite remote sensing and ground observation data sets. Methodologically, the sign of the feedback is identified by the correlation between monthly soil moisture and next-month precipitation. The physical mechanism is investigated through coupling precipitation and soil moisture (P-SM), soil moisture ad evapotranspiration (SM-E) and evapotranspiration and precipitation (E-P) correlations. Our results demonstrate that although positive SM-P feedback is predominant over land, non-negligible negative feedback occurs in dry and wet regions. Specifically, 43.75% and 40.16% of the negative feedback occurs in the arid and humid climate zones. Physically, negative SM-P feedback depends on the SM-E correlation. In dry regions, evapotranspiration change is soil moisture limited. In wet regions, evapotranspiration change is energy limited. We conclude that the complex SM-E correlation results in negative SM-P feedback in dry and wet regions, and the cause varies based on the environmental and climatic conditions.

Shared Memory Parallelism for 3D Cartesian Discrete Ordinates Solver

NASA Astrophysics Data System (ADS)

Moustafa, Salli; Dutka-Malen, Ivan; Plagne, Laurent; Ponçot, Angélique; Ramet, Pierre

2014-06-01

This paper describes the design and the performance of DOMINO, a 3D Cartesian SN solver that implements two nested levels of parallelism (multicore+SIMD) on shared memory computation nodes. DOMINO is written in C++, a multi-paradigm programming language that enables the use of powerful and generic parallel programming tools such as Intel TBB and Eigen. These two libraries allow us to combine multi-thread parallelism with vector operations in an efficient and yet portable way. As a result, DOMINO can exploit the full power of modern multi-core processors and is able to tackle very large simulations, that usually require large HPC clusters, using a single computing node. For example, DOMINO solves a 3D full core PWR eigenvalue problem involving 26 energy groups, 288 angular directions (S16), 46 × 106 spatial cells and 1 × 1012 DoFs within 11 hours on a single 32-core SMP node. This represents a sustained performance of 235 GFlops and 40:74% of the SMP node peak performance for the DOMINO sweep implementation. The very high Flops/Watt ratio of DOMINO makes it a very interesting building block for a future many-nodes nuclear simulation tool.

Semi-metric analysis of the functional brain network: Relationship with familial risk for psychotic disorder

PubMed Central

Peeters, Sanne; Simas, Tiago; Suckling, John; Gronenschild, Ed; Patel, Ameera; Habets, Petra; van Os, Jim; Marcelis, Machteld

2015-01-01

Background Dysconnectivity in schizophrenia can be understood in terms of dysfunctional integration of a distributed network of brain regions. Here we propose a new methodology to analyze complex networks based on semi-metric behavior, whereby higher levels of semi-metricity may represent a higher level of redundancy and dispersed communication. It was hypothesized that individuals with (increased risk for) psychotic disorder would have more semi-metric paths compared to controls and that this would be associated with symptoms. Methods Resting-state functional MRI scans were obtained from 73 patients with psychotic disorder, 83 unaffected siblings and 72 controls. Semi-metric percentages (SMP) at the whole brain, hemispheric and lobar level were the dependent variables in a multilevel random regression analysis to investigate group differences. SMP was further examined in relation to symptomatology (i.e., psychotic/cognitive symptoms). Results At the whole brain and hemispheric level, patients had a significantly higher SMP compared to siblings and controls, with no difference between the latter. In the combined sibling and control group, individuals with high schizotypy had intermediate SMP values in the left hemisphere with respect to patients and individuals with low schizotypy. Exploratory analyses in patients revealed higher SMP in 12 out of 42 lobar divisions compared to controls, of which some were associated with worse PANSS symptomatology (i.e., positive symptoms, excitement and emotional distress) and worse cognitive performance on attention and emotion processing tasks. In the combined group of patients and controls, working memory, attention and social cognition were associated with higher SMP. Discussion The results are suggestive of more dispersed network communication in patients with psychotic disorder, with some evidence for trait-based network alterations in high-schizotypy individuals. Dispersed communication may contribute to the clinical phenotype in psychotic disorder. In addition, higher SMP may contribute to neuro- and social cognition, independent of psychosis risk. PMID:26740914

Convection and the Soil-Moisture Precipitation Feedback

NASA Astrophysics Data System (ADS)

Schar, C.; Froidevaux, P.; Keller, M.; Schlemmer, L.; Langhans, W.; Schmidli, J.

2014-12-01

The soil moisture - precipitation (SMP) feedback is of key importance for climate and climate change. A positive SMP feedback tends to amplify the hydrological response to external forcings (and thereby fosters precipitation and drought extremes), while a negative SMP feedback tends to moderate the influence of external forcings (and thereby stabilizes the hydrological cycle). The sign of the SMP feedback is poorly constrained by the current literature. Theoretical, modeling and observational studies partly disagree, and have suggested both negative and positive feedback loops. Can wet soil anomalies indeed result in either an increase or a decrease of precipitation (positive or negative SMP feedback, respectively)? Here we investigate the local SMP feedback using real-case and idealized convection-resolving simulations. An idealized simulation strategy is developed, which is able to replicate both signs of the feedback loop, depending on the environmental parameters. The mechanism relies on horizontal soil moisture variations, which may develop and intensify spontaneously. The positive expression of the feedback is associated with the initiation of convection over dry soil patches, but the convective cells then propagate over wet patches, where they strengthen and preferentially precipitate. The negative feedback may occur when the wind profile is too weak to support the propagation of convective features from dry to wet areas. Precipitation is then generally weaker and falls preferentially over dry patches. The results highlight the role of the mid-tropospheric flow in determining the sign of the feedback. A key element of the positive feedback is the exploitation of both low convective inhibition (CIN) over dry patches (for the initiation of convection), and high CAPE over wet patches (for the generation of precipitation). The results of this study will also be discussed in relation to climate change scenarios that exhibit large biases in surface temperature and interannual variability over mid-latitude summer climates, both over Europe and North America. It is argued that parameterized convection may contribute towards such biases by overemphasizing a positive SMP feedback.

Transient thermal analysis for radioactive liquid mixing operations in a large-scaled tank

DOE PAGES

Lee, S. Y.; Smith, III, F. G.

2014-07-25

A transient heat balance model was developed to assess the impact of a Submersible Mixer Pump (SMP) on radioactive liquid temperature during the process of waste mixing and removal for the high-level radioactive materials stored in Savannah River Site (SRS) tanks. The model results will be mainly used to determine the SMP design impacts on the waste tank temperature during operations and to develop a specification for a new SMP design to replace existing longshaft mixer pumps used during waste removal. The present model was benchmarked against the test data obtained by the tank measurement to examine the quantitative thermalmore » response of the tank and to establish the reference conditions of the operating variables under no SMP operation. The results showed that the model predictions agreed with the test data of the waste temperatures within about 10%.« less

Study of Thread Level Parallelism in a Video Encoding Application for Chip Multiprocessor Design

NASA Astrophysics Data System (ADS)

Debes, Eric; Kaine, Greg

2002-11-01

In media applications there is a high level of available thread level parallelism (TLP). In this paper we study the intra TLP in a video encoder. We show that a well-distributed highly optimized encoder running on a symmetric multiprocessor (SMP) system can run 3.2 faster on a 4-way SMP machine than on a single processor. The multithreaded encoder running on an SMP system is then used to understand the requirements of a chip multiprocessor (CMP) architecture, which is one possible architectural direction to better exploit TLP. In the framework of this study, we use a software approach to evaluate the dataflow between processors for the video encoder running on an SMP system. An estimation of the dataflow is done with L2 cache miss event counters using Intel® VTuneTM performance analyzer. The experimental measurements are compared to theoretical results.

Adaptive Origami for Efficiently Folded Structures

DTIC Science & Technology

2016-02-01

design optimization to find optimal origami patterns for in-plane compression. 3. Self-folding and programmable material systems were developed for...2014, 1st place in the Midwest and 2nd place in the National 2014 SAMPE student research symposium). • Design of self-folding and programmable ... material systems: Nafion SMP Programming: To integrate active materials into origami, mechanical analysis and optimization tools where applied to the

Profile of Secondary School Students with High Mathematics Ability in Solving Shape and Space Problem

ERIC Educational Resources Information Center

Putra, Mulia; Novita, Rita

2015-01-01

This study aimed to describe the profile of secondary school students with high mathematics ability in solving shape and space problem in PISA (Program for International Student Assessment). It is a descriptive research with a qualitative approach, in which the subjects in this study were students of class VIII SMP N 1 Banda Aceh. The results show…

Mechanical properties of shape memory polymers for morphing aircraft applications

NASA Astrophysics Data System (ADS)

Keihl, Michelle M.; Bortolin, Robert S.; Sanders, Brian; Joshi, Shiv; Tidwell, Zeb

2005-05-01

This investigation addresses basic characterization of a shape memory polymer (SMP) as a suitable structural material for morphing aircraft applications. Tests were performed for monotonic loading in high shear at constant temperature, well below, or just above the glass transition temperature. The SMP properties were time-and temperature-dependent. Recovery by the SMP to its original shape needed to be unfettered. Based on the testing SMPs appear to be an attractive and promising component in the solution for a skin material of a morphing aircraft. Their multiple state abilities allow them to easily change shape and, once cooled, resist large loads.

Assessment of Version 4 of the SMAP Passive Soil Moisture Standard Product

NASA Technical Reports Server (NTRS)

O'neill, P. O.; Chan, S.; Bindlish, R.; Jackson, T.; Colliander, A.; Dunbar, R.; Chen, F.; Piepmeier, Jeffrey R.; Yueh, S.; Entekhabi, D.;

Thermomechanical properties of polyurethane shape memory polymer-experiment and modelling

NASA Astrophysics Data System (ADS)

Pieczyska, E. A.; Maj, M.; Kowalczyk-Gajewska, K.; Staszczak, M.; Gradys, A.; Majewski, M.; Cristea, M.; Tobushi, H.; Hayashi, S.

2015-04-01

In this paper extensive research on the polyurethane shape memory polymer (PU-SMP) is reported, including its structure analysis, our experimental investigation of its thermomechanical properties and its modelling. The influence of the effects of thermomechanical couplings on the SMP behaviour during tension at room temperature is studied using a fast and sensitive infrared camera. It is shown that the thermomechanical behaviour of the SMP significantly depends on the strain rate: at a higher strain rate higher stress and temperature values are obtained. This indicates that an increase of the strain rate leads to activation of different deformation mechanisms at the micro-scale, along with reorientation and alignment of the molecular chains. Furthermore, influence of temperature on the SMP’s mechanical behaviour is studied. It is observed during the loading in a thermal chamber that at the temperature 20 °C below the glass transition temperature (Tg) the PU-SMP strengthens about six times compared to the material above Tg but does not exhibit the shape recovery. A finite-strain constitutive model is formulated, where the SMP is described as a two-phase material composed of a hyperelastic rubbery phase and elastic-viscoplastic glassy phase. The volume content of phases is governed by the current temperature. Finally, model predictions are compared with the experimental results.

Marijuana use and sex with multiple partners among lesbian, gay and bisexual youth: results from a national sample.

PubMed

Zhang, Xiaoyun; Wu, Li-Tzy

2017-01-05

Sex with multiple partners (SMP) is one of the important contributing factors for contracting sexually transmitted infections (STIs) among adolescents and young adults, especially among Lesbian, Gay, and Bisexual (LGB) youth. Past studies mainly focus on examining associations of alcohol or club drugs use with unprotected sexual behaviors among adult homo/bisexual men, while little is known about the temporal association between marijuana use (MU) and SMP among LGB youth. This study examined the relationship between MU and SMP among LGB adolescents and young adults. Generalized estimating equations (GEE) logistic regression analyses were utilized to analyze four waves' public-use Add Health data (N = 694, youth who reported a homo/bisexual status at any wave; Wave 1: aged 11-21; Wave 4: aged 24-32). After adjusting for other substance use, current depression, mother-child relationship quality at Wave 1, and socioeconomic variables, past-year MU was both concurrently and prospectively associated with past-year SMP. The moderating effect of age was not found. MU is concurrently and prospectively associated with increased odds of SMP in the adolescent sample and in the young adult sample. Findings imply that prevention/intervention on HIV risk behaviors may benefit from MU reduction not only in LGB adolescents but also in young adults.

Snowpack spatial and temporal variability assessment using SMP high-resolution penetrometer

NASA Astrophysics Data System (ADS)

Komarov, Anton; Seliverstov, Yuriy; Sokratov, Sergey; Grebennikov, Pavel

2017-04-01

This research is focused on study of spatial and temporal variability of structure and characteristics of snowpack, quick identification of layers based on hardness and dispersion values received from snow micro penetrometer (SMP). We also discuss the detection of weak layers and definition of their parameters in non-alpine terrain. As long as it is the first SMP tool available in Russia, our intent is to test it in different climate and weather conditions. During two separate snowpack studies in plain and mountain landscapes, we derived density and grain size profiles by comparing snow density and grain size from snowpits and SMP measurements. The first case study was MSU meteorological observatory test site in Moscow. SMP data was obtained by 6 consecutive measurements along 10 m transects with a horizontal resolution of approximately 50 cm. The detailed description of snowpack structure, density, grain size, air and snow temperature was also performed. By comparing this information, the detailed scheme of snowpack evolution was created. The second case study was in Khibiny mountains. One 10-meter-long transect was made. SMP, density, grain size and snow temperature data was obtained with horizontal resolution of approximately 50 cm. The high-definition profile of snowpack density variation was acquired using received data. The analysis of data reveals high spatial and temporal variability in snow density and layer structure in both horizontal and vertical dimensions. It indicates that the spatial variability is exhibiting similar spatial patterns as surface topology. This suggests a strong influence from such factors as wind and liquid water pressure on the temporal and spatial evolution of snow structure. It was also defined, that spatial variation of snowpack characteristics is substantial even within homogeneous plain landscape, while in high-latitude mountain regions it grows significantly.

Memory Benchmarks for SMP-Based High Performance Parallel Computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, A B; de Supinski, B; Mueller, F

2001-11-20

As the speed gap between CPU and main memory continues to grow, memory accesses increasingly dominates the performance of many applications. The problem is particularly acute for symmetric multiprocessor (SMP) systems, where the shared memory may be accessed concurrently by a group of threads running on separate CPUs. Unfortunately, several key issues governing memory system performance in current systems are not well understood. Complex interactions between the levels of the memory hierarchy, buses or switches, DRAM back-ends, system software, and application access patterns can make it difficult to pinpoint bottlenecks and determine appropriate optimizations, and the situation is even moremore » complex for SMP systems. To partially address this problem, we formulated a set of multi-threaded microbenchmarks for characterizing and measuring the performance of the underlying memory system in SMP-based high-performance computers. We report our use of these microbenchmarks on two important SMP-based machines. This paper has four primary contributions. First, we introduce a microbenchmark suite to systematically assess and compare the performance of different levels in SMP memory hierarchies. Second, we present a new tool based on hardware performance monitors to determine a wide array of memory system characteristics, such as cache sizes, quickly and easily; by using this tool, memory performance studies can be targeted to the full spectrum of performance regimes with many fewer data points than is otherwise required. Third, we present experimental results indicating that the performance of applications with large memory footprints remains largely constrained by memory. Fourth, we demonstrate that thread-level parallelism further degrades memory performance, even for the latest SMPs with hardware prefetching and switch-based memory interconnects.« less

Impact of Multi-Micronutrient Fortified Rice on Hemoglobin, Iron and Vitamin A Status of Cambodian Schoolchildren: a Double-Blind Cluster-Randomized Controlled Trial.

PubMed

Perignon, Marlène; Fiorentino, Marion; Kuong, Khov; Dijkhuizen, Marjoleine A; Burja, Kurt; Parker, Megan; Chamnan, Chhoun; Berger, Jacques; Wieringa, Frank T

2016-01-07

In Cambodia, micronutrient deficiencies remain a critical public health problem. Our objective was to evaluate the impact of multi-micronutrient fortified rice (MMFR) formulations, distributed through a World Food Program school-meals program (WFP-SMP), on the hemoglobin concentrations and iron and vitamin A (VA) status of Cambodian schoolchildren. The FORISCA-UltraRice+NutriRice study was a double-blind, cluster-randomized, placebo-controlled trial. Sixteen schools participating in WFP-SMP were randomly assigned to receive extrusion-fortified rice (UltraRice Original, UltraRice New (URN), or NutriRice) or unfortified rice (placebo) six days a week for six months. Four additional schools not participating in WFP-SMP were randomly selected as controls. A total of 2440 schoolchildren (6-16 years old) participated in the biochemical study. Hemoglobin, iron status, estimated using inflammation-adjusted ferritin and transferrin receptors concentrations, and VA status, assessed using inflammation-adjusted retinol-binding protein concentration, were measured at the baseline, as well as at three and six months. Baseline prevalence of anemia, depleted iron stores, tissue iron deficiency, marginal VA status and VA deficiency were 15.6%, 1.4%, 51.0%, 7.9%, and 0.7%, respectively. The strongest risk factors for anemia were hemoglobinopathy, VA deficiency, and depleted iron stores (all p < 0.01). After six months, children receiving NutriRice and URN had 4 and 5 times less risk of low VA status, respectively, in comparison to the placebo group. Hemoglobin significantly increased (+0.8 g/L) after three months for the URN group in comparison to the placebo group; however, this difference was no longer significant after six months, except for children without inflammation. MMFR containing VA effectively improved the VA status of schoolchildren. The impact on hemoglobin and iron status was limited, partly by sub-clinical inflammation. MMFR combined with non-nutritional approaches addressing anemia and inflammation should be further investigated.

76 FR 76180 - Final Environmental Impact Statement/Environmental Impact Report (EIS/EIR) for the Suisun Marsh...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

...) Federal joint lead agencies, and the State of California Department of Fish and Game (DFG), acting as the..., Preservation, and Restoration Plan (SMP) Final EIS/EIR. The SMP is a comprehensive plan designed to address the...

Parametric analysis and temperature effect of deployable hinged shells using shape memory polymers

NASA Astrophysics Data System (ADS)

Tao, Ran; Yang, Qing-Sheng; He, Xiao-Qiao; Liew, Kim-Meow

2016-11-01

Shape memory polymers (SMPs) are a class of intelligent materials, which are defined by their capacity to store a temporary shape and recover an original shape. In this work, the shape memory effect of SMP deployable hinged shell is simulated by using compiled user defined material subroutine (UMAT) subroutine of ABAQUS. Variations of bending moment and strain energy of the hinged shells with different temperatures and structural parameters in the loading process are given. The effects of the parameters and temperature on the nonlinear deformation process are emphasized. The entire thermodynamic cycle of SMP deployable hinged shell includes loading at high temperature, load carrying with cooling, unloading at low temperature and recovering the original shape with heating. The results show that the complicated thermo-mechanical deformation and shape memory effect of SMP deployable hinge are influenced by the structural parameters and temperature. The design ability of SMP smart hinged structures in practical application is prospected.

Effects of hydraulic retention time and bioflocculant addition on membrane fouling in a sponge-submerged membrane bioreactor.

PubMed

Deng, Lijuan; Guo, Wenshan; Ngo, Huu Hao; Du, Bing; Wei, Qin; Tran, Ngoc Han; Nguyen, Nguyen Cong; Chen, Shiao-Shing; Li, Jianxin

2016-06-01

The characteristics of activated sludge and membrane fouling were evaluated in a sponge-submerged membrane bioreactor (SSMBR) at different hydraulic retention times (HRTs) (6.67, 5.33 and 4.00h). At shorter HRT, more obvious membrane fouling was caused by exacerbated cake layer formation and aggravated pore blocking. Activated sludge possessed more extracellular polymeric substances (EPS) due to excessive growth of biomass and lower protein to polysaccharide ratio in soluble microbial products (SMP). The cake layer resistance was aggravated by increased sludge viscosity together with the accumulated EPS and biopolymer clusters (BPC) on membrane surface. However, SMP showed marginal effect on membrane fouling when SSMBRs were operated at all HRTs. The SSMBR with Gemfloc® addition at the optimum HRT of 6.67h demonstrated superior sludge characteristics such as larger floc size, less SMP in mixed liquor with higher protein/polysaccharide ratio, less SMP and BPC in cake layer, thereby further preventing membrane fouling. Copyright © 2016 Elsevier Ltd. All rights reserved.

Membrane fouling related to microbial community and extracellular polymeric substances at different temperatures.

PubMed

Gao, Da-Wen; Wen, Zhi-Dan; Li, Bao; Liang, Hong

2013-09-01

An anoxic-aerobic membrane bioreactor was established to investigate the role of microorganisms and microbial metabolites in membrane fouling at different temperatures. The results showed that the membrane fouling cycle at 303, 293, and 283 K were 30, 29, and 5.5 days, respectively. Polysaccharides dominated the extracellular polymeric substances (EPS) and soluble microbial products (SMP) at 303 and 293 K, instead, proteins was the predominant composition of metabolites at 283 K. The correlation coefficient (r(2)) was calculated to identify the relationship between temperature (T), filtration resistance (R) and compositions of EPS and SMP. In biocake, the EPS polysaccharides (EPSc) was the most correlative factor to temperature (T) and filtration resistance (R); in mixed liquor, the ratio of SMP polysaccharides to proteins (SMPc/p) was the most correlative factor. The microbial community structure and the dominant species was the major reason causing the change of EPS and SMP composition. Copyright © 2013 Elsevier Ltd. All rights reserved.

Alterations in expression of senescence marker protein-30 gene by 3,3',5-triiodo-L-thyronine (T3).

PubMed

Sar, Pranati; Rath, Bandita; Subudhi, Umakanta; Chainy, Gagan Bihari Nityananda; Supakar, Prakash Chandra

2007-09-01

Thyroid hormone (T3) is essential for normal development, differentiation, and metabolic balance of the body. A toxic dose of T(3) in animals increases the basal metabolic rate and reactive oxygen species production, resulting more oxidative stress through Ca(2+) influx to cytoplasm. Senescence Marker Protein-30 (SMP30) is preferentially expressed in the liver and protects cells against various injuries by enhancement of Ca(2+) efflux to either extra cellular space or intraorganellar spaces through membrane Ca(2+) pump activity. In this paper we report an alteration in the level of SMP30 gene expression using RT-PCR and western blot analysis in T(3) treated female Wistar rats. The results indicate that there is an induction of SMP30 expression during early hours of T(3 )treatment and it declines in severe hyperthyroidism. Therefore, we speculate that SMP30 is regulated by T(3) and might play a protective role in hyperthyroidism.

Effect of storage temperature on the activity of submitochondrial particles.

PubMed

Doherty, Francis G

2008-12-01

The submitochondrial particle (SMP) assay employs processed mammalian mitchondria to assess the toxicity of chemical contaminants in aqueous solutions. Particles and associated reagents are commercially available to support two individual procedures, the electron transfer (ETr) and reverse electron transfer (RET) assays. The objective of the present study was to assess the effect of storage temperature on SMP activity. One RET and one ETr assay were conducted with sodium dodecylsulfate on each of two vials of particles stored at -20 and -80 degrees C at periodic intervals over a six-month span. Results demonstrated that SMP could remain active in either assay through six months of storage at either temperature. However, there were isolated vials of particles stored at -20 degrees C that exhibited unacceptable reductions in activity for both the ETr and the RET assays that were not related to storage duration. These results were used to develop guidance in assessing the acceptability of particle activity in SMP assays.

Universal calculational recipe for solvent-mediated potential: based on a combination of integral equation theory and density functional theory

NASA Astrophysics Data System (ADS)

Zhou, Shiqi

2004-07-01

A universal formalism, which enables calculation of solvent-mediated potential (SMP) between two equal or non-equal solute particles with any shape immersed in solvent reservior consisting of atomic particle and/or polymer chain or their mixture, is proposed by importing a density functional theory externally into OZ equation systems. Only if size asymmetry of the solvent bath components is moderate, the present formalism can calculate the SMP in any complex fluids at the present development stage of statistical mechanics, and therefore avoids all of limitations of previous approaches for SMP. Preliminary calculation indicates the reliability of the present formalism.

PROFILE OF TOXIC RESPONSE TO SEDIMENTS USING WHOLE-ANIMAL AND IN VITRO SUBMITOCHONDRIAL PARTICLE (SMP) ASSAYS

EPA Science Inventory

A rapid bioassy for monitoring acute toxicity of wastewater, ground water, and soil and sediment extracts using submitochondrial particles (SMP) has been developed. The assay utilizes the mitochondrial electron transfer enzyme complex present in all eukaryotic cells. Prior develo...

Multi-shape active composites by 3D printing of digital shape memory polymers

NASA Astrophysics Data System (ADS)

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L.; Qi, H. Jerry

2016-04-01

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Multi-shape active composites by 3D printing of digital shape memory polymers.

PubMed

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L; Qi, H Jerry

2016-04-13

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers - digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications.

Multi-shape active composites by 3D printing of digital shape memory polymers

PubMed Central

Wu, Jiangtao; Yuan, Chao; Ding, Zhen; Isakov, Michael; Mao, Yiqi; Wang, Tiejun; Dunn, Martin L.; Qi, H. Jerry

2016-01-01

Recent research using 3D printing to create active structures has added an exciting new dimension to 3D printing technology. After being printed, these active, often composite, materials can change their shape over time; this has been termed as 4D printing. In this paper, we demonstrate the design and manufacture of active composites that can take multiple shapes, depending on the environmental temperature. This is achieved by 3D printing layered composite structures with multiple families of shape memory polymer (SMP) fibers – digital SMPs - with different glass transition temperatures (Tg) to control the transformation of the structure. After a simple single-step thermomechanical programming process, the fiber families can be sequentially activated to bend when the temperature is increased. By tuning the volume fraction of the fibers, bending deformation can be controlled. We develop a theoretical model to predict the deformation behavior for better understanding the phenomena and aiding the design. We also design and print several flat 2D structures that can be programmed to fold and open themselves when subjected to heat. With the advantages of an easy fabrication process and the controllable multi-shape memory effect, the printed SMP composites have a great potential in 4D printing applications. PMID:27071543

Photolysis of sulfamethoxypyridazine in various aqueous media: aerobic biodegradation and identification of photoproducts by LC-UV-MS/MS.

PubMed

Khaleel, Nareman D H; Mahmoud, Waleed M M; Hadad, Ghada M; Abdel-Salam, Randa A; Kümmerer, Klaus

2013-01-15

Sulfonamides are one of the most frequently used antibiotics worldwide. Therefore, mitigation processes such as abiotic or biotic degradation are of interest. Photodegradation and biodegradation are the potentially significant removal mechanisms for pharmaceuticals in aquatic environments. The photolysis of sulfamethoxypyridazine (SMP) using a medium pressure Hg-lamp was evaluated in three different media: Millipore water pH 6.1 (MW), effluent from sewage treatment plant pH 7.6 (STP), and buffered demineralized water pH 7.4 (BDW). Identification of transformation products (TPs) was performed by LC-UV-MS/MS. The biodegradation of SMP using two tests from the OECD series was studied: Closed Bottle test (OECD 301 D), and Manometric Respirometry test (OECD 301 F). In biodegradation tests, it was found that SMP was not readily biodegradable so it may pose a risk to the environment. The results showed that SMP was removed completely within 128 min of irradiation in the three media, and the degradation rate was different for each investigated type of water. However, dissolved organic carbon (DOC) was not removed in BDW and only little DOC removal was observed in MW and STP, thus indicating the formation of TPs. Analysis by LC-UV-MS/MS revealed new TPs formed. The hydroxylation of SMP represents the main photodegradation pathway. Copyright © 2012 Elsevier B.V. All rights reserved.

Taking It to the Next Level: Students Using Inductive Reasoning

ERIC Educational Resources Information Center

Murawska, Jaclyn M.; Zollman, Alan

2015-01-01

Although discussions about inductive reasoning can be traced back thousands of years (Fitelson 2011), the implementation of the Standards for Mathematical Practice (SMP) within the Common Core State Standards (CCSSI 2010) is generating renewed attention to how students learn mathematics. The third SMP, "Construct viable arguments and critique…

A D'-type symbiotic binary in the planetary nebula SMP LMC 88

NASA Astrophysics Data System (ADS)

Iłkiewicz, Krystian; Mikołajewska, Joanna; Miszalski, Brent; Kozłowski, Szymon; Udalski, Andrzej

2018-05-01

SMP LMC 88 is one of the planetary nebulae (PNe) in the Large Magellanic Cloud. We identify in its spectrum Raman scattered O VI lines at 6825 and 7083 Å. This unambiguously classifies the central object of the nebula as a symbiotic star (SySt). We identified the cold component to be a K-type giant, making this the first D'-type (yellow) SySt discovered outside the Galaxy. The photometric variability in SMP LMC 88 resembles the orbital variability of Galactic D'-type SySt with its low amplitude and sinusoidal light-curve shape. The SySt classification is also supported by the He I diagnostic diagram.

Impact of the Skim Milk Powder Manufacturing Process on the Flavor of Model White Chocolate.

PubMed

Stewart, Ashleigh; Grandison, Alistair S; Ryan, Angela; Festring, Daniel; Methven, Lisa; Parker, Jane K

2017-02-15

Milk powder is an important ingredient in the confectionery industry, but its variable nature has consequences for the quality of the final confectionary product. This paper demonstrates that skim milk powders (SMP) produced using different (but typical) manufacturing processes, when used as ingredients in the manufacture of model white chocolates, had a significant impact on the sensory and volatile profiles of the chocolate. SMP was produced from raw bovine milk using either low or high heat treatment, and a model white chocolate was prepared from each SMP. A directional discrimination test with naïve panelists showed that the chocolate prepared from the high heat SMP had more caramel/fudge character (p < 0.0001), and sensory profiling with an expert panel showed an increase in both fudge (p < 0.05) and condensed milk (p < 0.05) flavor. Gas chromatography (GC)-mass spectrometry and GC-olfactometry of both the SMPs and the model chocolates showed a concomitant increase in Maillard-derived volatiles which are likely to account for this change in flavor.

Liposuction-assisted four pedicle-based breast reduction (LAFPBR): A new safer technique of breast reduction for elderly patients.

PubMed

La Padula, Simone; Hersant, Barbara; Noel, Warren; Meningaud, Jean Paul

2018-05-01

As older people increasingly care for their body image and remain active longer, the demand for reduction mammaplasty is increasing in this population. Only a few studies of reduction mammaplasty have specifically focussed on the outcomes in elderly women. We developed a new breast reduction technique: the Liposuction-Assisted Four Pedicle-Based Breast Reduction (LAFPBR) that is especially indicated for elderly patients. The aim of this paper was to describe the LAFPBR technique and to determine whether it could be considered a safer option for elderly patients compared to the superomedial pedicle (SMP) technique. A retrospective study included sixty-two women aged 60 years and over who underwent bilateral breast reduction mammaplasty. Thirty-one patients underwent LAFPBR and 31 patients were operated using the SMP technique. Complications and patient satisfaction in both groups were analysed. Patient satisfaction was measured using a validated questionnaire: the client satisfaction questionnaire 8 (CSQ-8). The LAFPBR technique required less operating time, and avoided significant blood loss. Six minor complications were observed in SMP patients. No LAFPBR women developed a procedure-related complication. Patient satisfaction was high with a mean score of 29.65 in LAFPBR patients and 28.68 in SMP patients. The LAFPBR is an easy procedure that appears safer than SMP and results in a high satisfaction rate in elderly women. Copyright © 2018 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Investigation on adaptive wing structure based on shape memory polymer composite hinge

NASA Astrophysics Data System (ADS)

Yu, Yuemin; Li, Xinbo; Zhang, Wei; Leng, Jinsong

2007-07-01

This paper describes the design and investigation of the SMP composite hinge and the morphing wing structure. The SMP composite hinge was based on SMP and carbon fiber fabric. The twisting recoverability of it was investigated by heating and then cooling repeatedly above and below the Tg. The twisting recoverability characterized by the twisting angle. Results show that the SMP composite hinge have good shape recoverability, Recovery time has a great influence on the twisting recoverability. The twisting recovery ratio became large with the increment of recovery time. The morphing wing can changes shape for different tasks. For the advantages of great recovery force and stable performances, we adopt SMP composite hinge as actuator to apply into the structure of the wing which can realize draw back wings to change sweep angle according to the speed and other requirements of military airplanes. Finally, a series of simulations and experiments are performed to investigate the deformations of morphing wings have been performed successfully. It can be seen that the sweep angle change became large with the increment of initial angle. The area reduction became large with the increment of initial angle, but after 75° the area reduction became smaller and smaller. The deformations of the triangle wing became large with the increment of temperature. The area and the sweep angle of wings can be controlled by adjusting the stimulate temperature and the initial twisting angle of shape memory polymer composite hinge.

The flagellar protein FLAG1/SMP1 is a candidate for Leishmania-sand fly interaction.

PubMed

Di-Blasi, Tatiana; Lobo, Amanda R; Nascimento, Luanda M; Córdova-Rojas, Jose L; Pestana, Karen; Marín-Villa, Marcel; Tempone, Antonio J; Telleria, Erich L; Ramalho-Ortigão, Marcelo; McMahon-Pratt, Diane; Traub-Csekö, Yara M

2015-03-01

Leishmaniasis is a serious problem that affects mostly poor countries. Various species of Leishmania are the agents of the disease, which take different clinical manifestations. The parasite is transmitted by sandflies, predominantly from the Phlebotomus genus in the Old World and Lutzomyia in the New World. During development in the gut, Leishmania must survive various challenges, which include avoiding being expelled with blood remnants after digestion. It is believed that attachment to the gut epithelium is a necessary step for vector infection, and molecules from parasites and sand flies have been implicated in this attachment. In previous work, monoclonal antibodies were produced against Leishmania. Among these an antibody was obtained against Leishmania braziliensis flagella, which blocked the attachment of Leishmania panamensis flagella to Phlebotomus papatasi guts. The protein recognized by this antibody was identified and named FLAG1, and the complete FLAG1 gene sequence was obtained. This protein was later independently identified as a small, myristoylated protein and called SMP1, so from now on it will be denominated FLAG1/SMP1. The FLAG1/SMP1 gene is expressed in all developmental stages of the parasite, but has higher expression in promastigotes. The anti-FLAG1/SMP1 antibody recognized the flagellum of all Leishmania species tested and generated the expected band by western blots. This antibody was used in attachment and infection blocking experiments. Using the New World vector Lutzomyia longipalpis and Leishmania infantum chagasi, no inhibition of attachment ex vivo or infection in vivo was seen. On the other hand, when the Old World vectors P. papatasi and Leishmania major were used, a significant decrease of both attachment and infection were seen in the presence of the antibody. We propose that FLAG1/SMP1 is involved in the attachment/infection of Leishmania in the strict vector P. papatasi and not the permissive vector L. longipalpis.

Inorganic-organic shape memory polymers and foams for bone defect repairs

NASA Astrophysics Data System (ADS)

Zhang, Dawei

The ultimate goal of this research was to develop a "self-fitting" shape memory polymer (SMP) scaffold for the repair of craniomaxillofacial (CMF) bone defects. CMF defects may be caused by trauma, tumor removal or congenital abnormalities and represent a major class of bone defects. Their repair with autografts is limited by availability, donor site morbidity and complex surgical procedures. In addition, shaping and positioning of these rigid grafts into irregular defects is difficult. Herein, we have developed SMP scaffolds which soften at T > ˜56 °C, allowing them to conformally fit into a bone defect. Upon cooling to body temperature, the scaffold becomes rigid and mechanically locks in place. This research was comprised of four major studies. In the first study, photocrosslinkable acrylated (AcO) SMP macromers containing a poly(epsilon-caprolactone) (PCL) segment and polydimethylsiloxane (PDMS) segments were synthesized with the general formula: AcO-PCL40-block-PDMS m-block-PCL40-OAc. By varying the PDMS segment length (m), solid SMPs with highly tunable mechanical properties and excellent shape memory abilities were prepared. In the second study, porous SMP scaffolds were fabricated based on AcO-PCL 40-block-PDMS37-block-PCL 40-OAc via a revised solvent casting particulate leaching (SCPL) method. By tailoring scaffold parameters including salt fusion, macromer concentration and salt size, scaffold properties (e.g. pore features, compressive modulus and shape memory behavior) were tuned. In the third study, porous SMP scaffolds were produced from macromers with variable PDMS segment lengths (m = 0 -- 130) via an optimized SCPL method. The impact on pore features, thermal, mechanical, and shape memory properties as well as degradation rates were investigated. In the final study, a bioactive polydopamine coating was applied onto pore surfaces of the SMP scaffold prepared from PCL diacrylate. The thin coating did not affect intrinsic bulk properties of the scaffold. However, the coating significantly increased its bioactivity, giving rise to the formation of "bone-bonding" hydroxyapatite (HAp) when exposed to simulated body fluid (SBF). It was also shown that the coating largely enhanced the scaffold's capacities to support osteoblasts adhesion, proliferation and osteogenesis. Thus, the polydopamine coating should enhance the performance of the "self-fitting" SMP scaffolds for the repair of bone defects.

A High Order, Locally-Adaptive Method for the Navier-Stokes Equations

NASA Astrophysics Data System (ADS)

Chan, Daniel

1998-11-01

I have extended the FOSLS method of Cai, Manteuffel and McCormick (1997) and implemented it within the framework of a spectral element formulation using the Legendre polynomial basis function. The FOSLS method solves the Navier-Stokes equations as a system of coupled first-order equations and provides the ellipticity that is needed for fast iterative matrix solvers like multigrid to operate efficiently. Each element is treated as an object and its properties are self-contained. Only C^0 continuity is imposed across element interfaces; this design allows local grid refinement and coarsening without the burden of having an elaborate data structure, since only information along element boundaries is needed. With the FORTRAN 90 programming environment, I can maintain a high computational efficiency by employing a hybrid parallel processing model. The OpenMP directives provides parallelism in the loop level which is executed in a shared-memory SMP and the MPI protocol allows the distribution of elements to a cluster of SMP's connected via a commodity network. This talk will provide timing results and a comparison with a second order finite difference method.

Residual Stresses and Other Properties of Teardrops

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroud, Mary Ann; Veirs, Douglas Kirk; Berg, John M.

The Department of Energy’s 3013 Standard for packaging plutonium-bearing materials for storage up to fifty years specifies a minimum of two individually welded, nested containers herein referred to as the 3013 outer and the 3013 inner.1 Stress corrosion cracking (SCC) is a potential failure mechanism for 3013 inner containers.2,3 The bagless transfer container (BTC), a 3013 inner container used by Hanford and Savanna River Site (SRS) made from 304L stainless steel (SS), poses the greatest concern for SCC.4,5 The Surveillance and Monitoring Program (SMP) use stressed metal samples known as teardrops as screening tools in SCC studies to evaluate factorsmore » that could result in cracks in the 3013 containers.6,7 This report provides background information on the teardrops used in the Los Alamos National Laboratory (LANL) SMP studies including method of construction, composition and variability. In addition, the report discusses measurements of residual stresses in teardrops and compares the results with residual stresses in BTCs reported previously.4 Factors affecting residual stresses, including teardrop dimensions and surface finish, are also discussed.« less

A non-targeted UHPLC-UV methid with classical and multi-variate data analysis to detect adulteration of skim milk powder with foreign proteins

USDA-ARS?s Scientific Manuscript database

Ultra-High performance liquid chromatography (UHPLC) with single wavelength (215 nm) detection was used to obtain chromatographic profiles of authentic skim milk powder (SMP) and synthetic mixtures of SMP with variable amounts of soy (SPI), pea (PPI), brown rice (BRP), and hydrolyzed wheat protein (...

Multigrid Equation Solvers for Large Scale Nonlinear Finite Element Simulations

DTIC Science & Technology

1999-01-01

purpose of the second partitioning phase , on each SMP, is to minimize the communication within the SMP; even if a multi - threaded matrix vector product...8.7 Comparison of model with experimental data for send phase of matrix vector product on ne grid...140 8.4 Matrix vector product phase times : : : : : : : : : : : : : : : : : : : : : : : 145 9.1 Flat and

SMP-domain proteins at membrane contact sites: Structure and function.

PubMed

Reinisch, Karin M; De Camilli, Pietro

2016-08-01

SMP-domains are found in proteins that localize to membrane contact sites. Elucidation of the properties of these proteins gives clues as to the molecular bases underlying processes that occur at such sites. Described here are recent discoveries concerning the structure, function, and regulation of the Extended-Synaptotagmin proteins and ERMES complex subunits, SMP-domain proteins at endoplasmic reticulum (ER)-plasma membrane and ER-mitochondrial contacts, respectively. They act as tethers contributing to the architecture of these sites and as lipid transporters that convey glycerolipids between apposed membranes. This article is part of a Special Issue entitled: The cellular lipid landscape edited by Tim P. Levine and Anant K. Menon. Copyright © 2016. Published by Elsevier B.V.

Fabrication and characterization of cylindrical light diffusers comprised of shape memory polymer.

PubMed

Small, Ward; Buckley, Patrick R; Wilson, Thomas S; Loge, Jeffrey M; Maitland, Kristen D; Maitland, Duncan J

2008-01-01

We developed a technique for constructing light diffusing devices comprised of a flexible shape memory polymer (SMP) cylindrical diffuser attached to the tip of an optical fiber. The devices are fabricated by casting an SMP rod over the cleaved tip of an optical fiber and media blasting the SMP rod to create a light diffusing surface. The axial and polar emission profiles and circumferential (azimuthal) uniformity are characterized for various blasting pressures, nozzle-to-sample distances, and nozzle translation speeds. The diffusers are generally strongly forward-directed and consistently withstand over 8 W of incident IR laser light without suffering damage when immersed in water. These devices are suitable for various endoluminal and interstitial biomedical applications.

Fabrication and characterization of cylindrical light diffusers comprised of shape memory polymer

PubMed Central

Small, Ward; Buckley, Patrick R.; Wilson, Thomas S.; Loge, Jeffrey M.; Maitland, Kristen D.; Maitland, Duncan J.

2009-01-01

We developed a technique for constructing light diffusing devices comprised of a flexible shape memory polymer (SMP) cylindrical diffuser attached to the tip of an optical fiber. The devices are fabricated by casting an SMP rod over the cleaved tip of an optical fiber and media blasting the SMP rod to create a light diffusing surface. The axial and polar emission profiles and circumferential (azimuthal) uniformity are characterized for various blasting pressures, nozzle-to-sample distances, and nozzle translation speeds. The diffusers are generally strongly forward-directed and consistently withstand over 8 W of incident IR laser light without suffering damage when immersed in water. These devices are suitable for various endoluminal and interstitial biomedical applications. PMID:18465981

Residual stresses in injection molded shape memory polymer parts

NASA Astrophysics Data System (ADS)

Katmer, Sukran; Esen, Huseyin; Karatas, Cetin

2016-03-01

Shape memory polymers (SMPs) are materials which have shape memory effect (SME). SME is a property which has the ability to change shape when induced by a stimulator such as temperature, moisture, pH, electric current, magnetic field, light, etc. A process, known as programming, is applied to SMP parts in order to alter them from their permanent shape to their temporary shape. In this study we investigated effects of injection molding and programming processes on residual stresses in molded thermoplastic polyurethane shape memory polymer, experimentally. The residual stresses were measured by layer removal method. The study shows that injection molding and programming process conditions have significantly influence on residual stresses in molded shape memory polyurethane parts.

Dietary supplements for chronic gout.

PubMed

Andrés, Mariano; Sivera, Francisca; Falzon, Louise; Buchbinder, Rachelle; Carmona, Loreto

2014-10-07

Dietary supplements are frequently used for the treatment of several medical conditions, both prescribed by physicians or self administered. However, evidence of benefit and safety of these supplements is usually limited or absent. To assess the efficacy and safety of dietary supplementation for people with chronic gout. We performed a search in the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE and CINAHL on 6 June 2013. We applied no date or language restrictions. In addition, we performed a handsearch of the abstracts from the 2010 to 2013 American College of Rheumatology (ACR) and European League against Rheumatism (EULAR) conferences, checked the references of all included studies and trial registries. We considered all published randomised controlled trials (RCTs) or quasi-RCTs that compared dietary supplements with no supplements, placebo, another supplement or pharmacological agents for adults with chronic gout for inclusion. Dietary supplements included, but were not limited to, amino acids, antioxidants, essential minerals, polyunsaturated fatty acids, prebiotic agents, probiotic agents and vitamins. The main outcomes were reduction in frequency of gouty attacks and trial participant withdrawal due to adverse events. We also considered pain reduction, health-related quality of life, serum uric acid (sUA) normalisation, function (i.e. activity limitation), tophus regression and the rate of serious adverse events. We used standard methodological procedures expected by The Cochrane Collaboration. We identified two RCTs (160 participants) that fulfilled our inclusion criteria. As these two trials evaluated different diet supplements (enriched skim milk powder (SMP) and vitamin C) with different outcomes (gout flare prevention for enriched SMP and sUA reduction for vitamin C), we reported the results separately.One trial including 120 participants, at moderate risk of bias, compared SMP enriched with glycomacropeptides (GMP) with unenriched SMP and with lactose over three months. Participants were predominantly men aged in their 50's who had severe gout. The frequency of acute gout attacks, measured as the number of flares per month, decreased in all three groups over the study period.The effects of enriched SMP (SMP/GMP/G600) compared with the combined control groups (SMP and lactose powder) at three months in terms of mean number of gout flares per month were uncertain (mean ± standard deviation (SD) flares per month: 0.49 ± 1.52 in SMP/GMP/G60 group versus 0.70 ± 1.28 in control groups; mean difference (MD) -0.21, 95% confidence interval (CI) -0.76 to 0.34; low-quality evidence). The number of withdrawals due to adverse effects was similar in both groups although again the results were imprecise (7/40 in SMP/GMP/G600 group versus 11/80 in control groups; risk ratio (RR) 1.27, 95% CI 0.53 to 3.03; low-quality evidence). The findings for adverse events were also uncertain (2/40 in SMP/GMP/G600 group versus 3/80 in control groups; RR 1.33, 95% CI 0.23 to 7.66; low-quality evidence). Gastrointestinal events were the most commonly reported adverse effects. Pain from self reported gout flares (measured on a 10-point Likert scale) improved slightly more in the SMP/GMP/G600 group compared with controls (mean ± SD reduction -1.97 ± 2.28 points in SMP/GMP/G600 group versus -0.94 ± 2.25 in control groups; MD -1.03, 95% CI -1.96 to -0.10; low-quality evidence). This was an absolute reduction of 10% (95% CI 20% to 1% reduction), which may not be of clinical relevance. Results were imprecise for the outcome improvement in physical function (mean ± SD Health Assessment Questionnaire (HAQ)-II (scale 0 to 3, 0 = no disability): 0.08 ± 0.23 in SMP/GMP/G60 group versus 0.11 ± 0.31 in control groups; MD -0.03, 95% CI -0.14 to 0.08; low-quality evidence). Similarly, results for sUA reduction were imprecise (mean ± SD reduction: -0.025 ± 0.067 mmol/L in SMP/GMP/G60 group versus -0.010 ± 0.069 in control groups; MD -0.01, 95% CI -0.04 to 0.01; low-quality evidence). The study did not report tophus regression and health-related quality of life impact.One trial including 40 participants, at moderate to high risk of bias, compared vitamin C alone with allopurinol and with allopurinol plus vitamin C in a three-arm trial. We only compared vitamin C with allopurinol in this review. Participants were predominantly middle-aged men, and their severity of gout was representative of gout in general. The effect of vitamin C on the rate of gout attacks was not assessed. Vitamin C did not lower sUA as much as allopurinol (-0.014 mmol/L in vitamin C group versus -0.118 mmol/L in allopurinol group; MD 0.10, 95% CI 0.06 to 0.15; low-quality evidence). The study did not assess tophus regression, pain reduction or disability or health-related quality of life impact. The study reported no adverse events and no participant withdrawal due to adverse events. While dietary supplements may be widely used for gout, this review has shown a paucity of high-quality evidence assessing dietary supplementation.

Evaluation of the Validated Soil Moisture Product from the SMAP Radiometer

NASA Technical Reports Server (NTRS)

O'Neill, P.; Chan, S.; Colliander, A.; Dunbar, S.; Njoku, E.; Bindlish, R.; Chen, F.; Jackson, T.; Burgin, M.; Piepmeier, J.;

Breeding goals for the Kenya dual purpose goat. I. Model development and application to smallholder production systems.

PubMed

Bett, R C; Kosgey, I S; Bebe, B O; Kahi, A K

2007-10-01

A deterministic model was developed and applied to evaluate biological and economic variables that characterize smallholder production systems utilizing the Kenya Dual Purpose goat (KDPG) in Kenya. The systems were defined as: smallholder low-potential (SLP), smallholder medium-potential (SMP) and smallholder high-potential (SHP). The model was able to predict revenues and costs to the system. Revenues were from sale of milk, surplus yearlings and cull-forage animals, while costs included those incurred for feeds, husbandry, marketing and fixed asset (fixed costs). Of the total outputs, revenue from meat and milk accounted for about 55% and 45%, respectively, in SMP and 39% and 61% in SHP. Total costs comprised mainly variable costs (98%), with husbandry costs being the highest in both SMP and SLP. The total profit per doe per year was KSh 315.48 in SMP, KSh -1352.75 in SLP and KSh -80.22 in SHP. Results suggest that the utilization of the KDPG goat in Kenya is more profitable in the smallholder medium-potential production system. The implication for the application of the model to smallholder production systems in Kenya is discussed.

Virtual Treatment of Basilar Aneurysms Using Shape Memory Polymer Foam

PubMed Central

Ortega, J.M.; Hartman, J.; Rodriguez, J.N.; Maitland, D.J.

2013-01-01

Numerical simulations are performed on patient-specific basilar aneurysms that are treated with shape memory polymer (SMP) foam. In order to assess the post-treatment hemodynamics, two modeling approaches are employed. In the first, the foam geometry is obtained from a micro-CT scan and the pulsatile blood flow within the foam is simulated for both Newtonian and non-Newtonian viscosity models. In the second, the foam is represented as a porous media continuum, which has permeability properties that are determined by computing the pressure gradient through the foam geometry over a range of flow speeds comparable to those of in vivo conditions. Virtual angiography and additional post-processing demonstrate that the SMP foam significantly reduces the blood flow speed within the treated aneurysms, while eliminating the high-frequency velocity fluctuations that are present within the pre-treatment aneurysms. An estimation of the initial locations of thrombus formation throughout the SMP foam is obtained by means of a low fidelity thrombosis model that is based upon the residence time and shear rate of blood. The Newtonian viscosity model and the porous media model capture similar qualitative trends, though both yield a smaller volume of thrombus within the SMP foam. PMID:23329002

CHEM-Based Self-Deploying Spacecraft Radar Antennas

NASA Technical Reports Server (NTRS)

Sokolowski, Witold; Huang, John; Ghaffarian, Reza

2004-01-01

A document proposes self-deploying spacecraft radar antennas based on cold hibernated elastic memory (CHEM) structures. Described in a number of prior NASA Tech Briefs articles, the CHEM concept is one of utilizing open-cell shape-memory-polymer (SMP) foams to make lightweight structures that can be compressed for storage and can later be expanded, then rigidified for use. A CHEM-based antenna according to the proposal would comprise three layers of microstrip patches and transmission lines interspersed with two flat layers of SMP foam, which would serve as both dielectric spacers and as means of deployment. The SMP foam layers would be fabricated at full size at a temperature below the SMP glass-transition temperature (Tg). The layers would be assembled into a unitary structure, which, at temperature above Tg, would be compacted to much smaller thickness, then rolled up for storage. Next, the structure would be cooled to below Tg and kept there during launch. Upon reaching the assigned position in outer space, the structure would be heated above Tg to make it rebound to its original size and shape. The structure as thus deployed would then be rigidified by natural cooling to below Tg

Virtual Treatment of Basilar Aneurysms Using Shape Memory Polymer Foam

NASA Astrophysics Data System (ADS)

Ortega, J. M.; Hartman, J.; Rodriguez, J. N.; Maitland, D. J.

2012-11-01

Numerical simulations are performed on patient-specific basilar aneurysms that are treated with shape memory polymer (SMP) foam. In order to assess the post-treatment hemodynamics, two modeling approaches are employed. In the first, the foam geometry is obtained from a micro-CT scan and the pulsatile blood flow within the foam is simulated for both Newtonian and non-Newtonian viscosity models. In the second, the foam is represented as a porous media continuum, which has permeability properties that are determined by computing the pressure gradient through the foam geometry over a range of flow speeds comparable to those of in vivo conditions. Virtual angiography and additional post-processing demonstrate that the SMP foam significantly reduces the blood flow speed within the treated aneurysms, while eliminating the high-frequency velocity fluctuations that are present prior to treatment. A prediction of the initial locations of thrombus formation throughout the SMP foam is obtained by means of a low fidelity thrombosis model that is based upon the residence time and shear rate of blood. The two modeling approaches capture similar qualitative trends for the initial locations of thrombus within the SMP foam.

OSCAR API for Real-Time Low-Power Multicores and Its Performance on Multicores and SMP Servers

NASA Astrophysics Data System (ADS)

Kimura, Keiji; Mase, Masayoshi; Mikami, Hiroki; Miyamoto, Takamichi; Shirako, Jun; Kasahara, Hironori

OSCAR (Optimally Scheduled Advanced Multiprocessor) API has been designed for real-time embedded low-power multicores to generate parallel programs for various multicores from different vendors by using the OSCAR parallelizing compiler. The OSCAR API has been developed by Waseda University in collaboration with Fujitsu Laboratory, Hitachi, NEC, Panasonic, Renesas Technology, and Toshiba in an METI/NEDO project entitled "Multicore Technology for Realtime Consumer Electronics." By using the OSCAR API as an interface between the OSCAR compiler and backend compilers, the OSCAR compiler enables hierarchical multigrain parallel processing with memory optimization under capacity restriction for cache memory, local memory, distributed shared memory, and on-chip/off-chip shared memory; data transfer using a DMA controller; and power reduction control using DVFS (Dynamic Voltage and Frequency Scaling), clock gating, and power gating for various embedded multicores. In addition, a parallelized program automatically generated by the OSCAR compiler with OSCAR API can be compiled by the ordinary OpenMP compilers since the OSCAR API is designed on a subset of the OpenMP. This paper describes the OSCAR API and its compatibility with the OSCAR compiler by showing code examples. Performance evaluations of the OSCAR compiler and the OSCAR API are carried out using an IBM Power5+ workstation, an IBM Power6 high-end SMP server, and a newly developed consumer electronics multicore chip RP2 by Renesas, Hitachi and Waseda. From the results of scalability evaluation, it is found that on an average, the OSCAR compiler with the OSCAR API can exploit 5.8 times speedup over the sequential execution on the Power5+ workstation with eight cores and 2.9 times speedup on RP2 with four cores, respectively. In addition, the OSCAR compiler can accelerate an IBM XL Fortran compiler up to 3.3 times on the Power6 SMP server. Due to low-power optimization on RP2, the OSCAR compiler with the OSCAR API achieves a maximum power reduction of 84% in the real-time execution mode.

Assessment of exposure to mixture pollutants in Mexican indigenous children.

PubMed

Flores-Ramírez, R; Pérez-Vázquez, F J; Cilia-López, V G; Zuki-Orozco, B A; Carrizales, L; Batres-Esquivel, L E; Palacios-Ramírez, A; Díaz-Barriga, F

2016-05-01

The aim of the present work was to complete an exposure assessment in three Mexican indigenous communities using the community-based health risk assessment, which is the first step in the CHILD framework. We used 1-hydroxypyrene (1-OHP) as an exposure biomarker to polycyclic aromatic hydrocarbons (PAHs) and trans, trans-muconic acid (t,t-MA) as an exposure biomarker to benzene, persistent organic pollutants (POPs), lead, manganese, arsenic, and fluoride. Anthropometric measurements were also taken. In these communities, high percentages of children with chronic malnutrition were found (28 to 49 %) based on their weight and age. All communities showed a high percentage of children with detectable levels of four or more compounds (70 to 82 %). Additionally, our results showed that in indigenous communities, children are exposed to elevated levels of certain environmental pollutants, including manganese with 17.6, 16.8, and 7.3 μg/L from SMP, TOC, and CUA, respectively. Lead and HCB levels were similar in the indigenous communities (2.5, 3.1, and 4.2 μg/dL and 2.5, 3.1, and 3.7 ng/mL, respectively). 1-OHP and t,t-MA levels were higher in TOC (0.8 μmol/mol of creatinine, 476 μg/g of creatinine, respectively) when compared with SMP (0.1 μmol/mol of creatinine, 215.5 μg/g of creatinine, respectively) and CUA (0.1 μmol/mol of creatinine, 185.2 μg/g of creatinine, respectively). DDE levels were 30.7, 26.9, and 9.6 ng/mL in CUA, SMP, and TOC, respectively. The strength of this study is that it assesses exposure to pollutants with indications for the resultant risk before an intervention is made by the CHILD program to manage this risk in the indigenous communities. Considering the large number of people, especially children, exposed to multiple pollutants, it is important to design effective intervention programs that reduce exposure and the resultant risk in the numerous indigenous communities in Mexico.

Microfabricated therapeutic actuators

DOEpatents

Lee, Abraham P.; Northrup, M. Allen; Ciarlo, Dino R.; Krulevitch, Peter A.; Benett, William J.

1999-01-01

Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a release actuator for the delivery of embolic coils through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use.

Microfabricated therapeutic actuators

DOEpatents

Lee, A.P.; Northrup, M.A.; Ciarlo, D.R.; Krulevitch, P.A.; Benett, W.J.

1999-06-15

Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a release actuator for the delivery of embolic coils through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use. 8 figs.

Release mechanism utilizing shape memory polymer material

DOEpatents

Lee, Abraham P.; Northrup, M. Allen; Ciarlo, Dino R.; Krulevitch, Peter A.; Benett, William J.

2000-01-01

Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a release actuator for the delivery of embolic coils through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use.

USAF Strategic Master Plan

DTIC Science & Technology

2015-05-01

objectives, and four annexes: the Human Capital Annex ( HCA ), Strategic Posture Annex (SPA), Capabilities Annex (CA), and the Science and Technology...translate the SMP’s comprehensive goals and objectives into tangible actions and priorities. The four annexes are as follows:  Human Capital Annex ( HCA ...Figure 1: Internal Structure of the SMP Through the HCA , SPA, CA, and STA, the SMP consolidates and transmits strategic direction to staffs

Mechanistic explanation of time-dependent cross-phenomenon based on quorum sensing: A case study of the mixture of sulfonamide and quorum sensing inhibitor to bioluminescence of Aliivibrio fischeri.

PubMed

Sun, Haoyu; Pan, Yongzheng; Gu, Yue; Lin, Zhifen

2018-07-15

Cross-phenomenon in which the concentration-response curve (CRC) for a mixture crosses the CRC for the reference model has been identified in many studies, expressed as a heterogeneous pattern of joint toxic action. However, a mechanistic explanation of the cross-phenomenon has thus far been extremely insufficient. In this study, a time-dependent cross-phenomenon was observed, in which the cross-concentration range between the CRC for the mixture of sulfamethoxypyridazine (SMP) and (Z-)-4-Bromo-5-(bromomethylene)-2(5H)-furanone (C30) to the bioluminescence of Aliivibrio fischeri (A. fischeri) and the CRC for independent action model with 95% confidence bands varied from low-concentration to higher-concentration regions in a timely manner expressed the joint toxic action of the mixture changing with an increase of both concentration and time. Through investigating the time-dependent hormetic effects of SMP and C30 (by measuring the expression of protein mRNA, simulating the bioluminescent reaction and analyzing the toxic action), the underlying mechanism was as follows: SMP and C30 acted on the quorum sensing (QS) system of A. fischeri, which induced low-concentration stimulatory effects and high-concentration inhibitory effects; in the low-concentration region, the stimulatory effects of SMP and C30 made the mixture produce a synergistic stimulation on the bioluminescence; thus, the joint toxic action exhibited antagonism. In the high-concentration region, the inhibitory effects of SMP and C30 in the mixture caused a double block in the loop circuit of the QS system; thus, the joint toxic action exhibited synergism. With the increase of time, these stimulatory and inhibitory effects of SMP and C30 were changed by the variation of the QS system at different growth phases, resulting in the time-dependent cross-phenomenon. This study proposes an induced mechanism for time-dependent cross-phenomenon based on QS, which may provide new insight into the mechanistic investigation of time-dependent cross-phenomenon, benefitting the environmental risk assessment of mixtures. Copyright © 2018 Elsevier B.V. All rights reserved.

Assessment of radiofrequency exposure from cellular telephone daily use in an epidemiological study: German Validation study of the international case-control study of cancers of the brain--INTERPHONE-Study.

PubMed

Berg, Gabriele; Schüz, Joachim; Samkange-Zeeb, Florence; Blettner, Maria

2005-05-01

The objective of the study is to validate self-reported cellular phone use information by comparing it with the cumulative emitted power and duration of calls measured by software-modified cellular phones (SMP). The information was obtained using a questionnaire developed for the international case-control study on the risk of the use of mobile phones in tumours of the brain or salivary gland (INTERPHONE-study). The study was conducted in Bielefeld, Germany. Volunteers were asked to use SMPs instead of their own cellular phones for a period of 1 month. The SMP recorded the power emitted by the mobile phone handset during each base station contact. Information on cellular phone use for the same time period from traffic records of the network providers and from face-to-face interviews with the participants 3 months after the SMP use was assessed. Pearson's correlation coefficients and linear regression models were used to analyse the association between information from the interview and from the SMP. In total, 1757 personal mobile phone calls were recorded for 45 persons by SMP and traffic records. The correlation between the self-reported information about the number and the duration of calls with the cumulative power of calls was 0.50 (P<0.01) and 0.48 (P<0.01), respectively. Almost 23% of the variance of the cumulative power was explained by either the number or the cumulative duration of calls. After inclusion of possible confounding factors in the regression model, the variance increased to 26%. Minor confounding factors were "network provider", "contract form", and "cellular phone model". The number of calls alone is a sufficient parameter to estimate the cumulative power emitted by the handset of a cellular telephone. The cumulative power emitted by these phones is only associated with number of calls but not with possible confounding factors. Using the mobile phone while driving, mainly in cities, or mainly in rural areas is not associated with the recorded cumulative power in the SMP.

Comparison of Established Diagnostic Methodologies and a Novel Bacterial smpB Real-Time PCR Assay for Specific Detection of Haemophilus influenzae Isolates Associated with Respiratory Tract Infections.

PubMed

Reddington, Kate; Schwenk, Stefan; Tuite, Nina; Platt, Gareth; Davar, Danesh; Coughlan, Helena; Personne, Yoann; Gant, Vanya; Enne, Virve I; Zumla, Alimuddin; Barry, Thomas

2015-09-01

Haemophilus influenzae is a significant causative agent of respiratory tract infections (RTI) worldwide. The development of a rapid H. influenzae diagnostic assay that would allow for the implementation of infection control measures and also improve antimicrobial stewardship for patients is required. A number of nucleic acid diagnostics approaches that detect H. influenzae in RTIs have been described in the literature; however, there are reported specificity and sensitivity limitations for these assays. In this study, a novel real-time PCR diagnostic assay targeting the smpB gene was designed to detect all serogroups of H. influenzae. The assay was validated using a panel of well-characterized Haemophilus spp. Subsequently, 44 Haemophilus clinical isolates were collected, and 36 isolates were identified as H. influenzae using a gold standard methodology that combined the results of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) and a fucK diagnostic assay. Using the novel smpB diagnostic assay, 100% concordance was observed with the gold standard, demonstrating a sensitivity of 100% (95% confidence interval [CI], 90.26% to 100.00%) and a specificity of 100% (95% CI, 63.06% to 100.00%) when used on clinical isolates. To demonstrate the clinical utility of the diagnostic assay presented, a panel of lower RTI samples (n = 98) were blindly tested with the gold standard and smpB diagnostic assays. The results generated were concordant for 94/98 samples tested, demonstrating a sensitivity of 90.91% (95% CI, 78.33% to 97.47%) and a specificity of 100% (95% CI, 93.40% to 100.00%) for the novel smpB assay when used directly on respiratory specimens. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Comparison of Established Diagnostic Methodologies and a Novel Bacterial smpB Real-Time PCR Assay for Specific Detection of Haemophilus influenzae Isolates Associated with Respiratory Tract Infections

PubMed Central

Reddington, Kate; Schwenk, Stefan; Tuite, Nina; Platt, Gareth; Davar, Danesh; Coughlan, Helena; Personne, Yoann; Gant, Vanya; Enne, Virve I.; Zumla, Alimuddin

2015-01-01

Haemophilus influenzae is a significant causative agent of respiratory tract infections (RTI) worldwide. The development of a rapid H. influenzae diagnostic assay that would allow for the implementation of infection control measures and also improve antimicrobial stewardship for patients is required. A number of nucleic acid diagnostics approaches that detect H. influenzae in RTIs have been described in the literature; however, there are reported specificity and sensitivity limitations for these assays. In this study, a novel real-time PCR diagnostic assay targeting the smpB gene was designed to detect all serogroups of H. influenzae. The assay was validated using a panel of well-characterized Haemophilus spp. Subsequently, 44 Haemophilus clinical isolates were collected, and 36 isolates were identified as H. influenzae using a gold standard methodology that combined the results of matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI-TOF MS) and a fucK diagnostic assay. Using the novel smpB diagnostic assay, 100% concordance was observed with the gold standard, demonstrating a sensitivity of 100% (95% confidence interval [CI], 90.26% to 100.00%) and a specificity of 100% (95% CI, 63.06% to 100.00%) when used on clinical isolates. To demonstrate the clinical utility of the diagnostic assay presented, a panel of lower RTI samples (n = 98) were blindly tested with the gold standard and smpB diagnostic assays. The results generated were concordant for 94/98 samples tested, demonstrating a sensitivity of 90.91% (95% CI, 78.33% to 97.47%) and a specificity of 100% (95% CI, 93.40% to 100.00%) for the novel smpB assay when used directly on respiratory specimens. PMID:26109443

Super-mini percutaneous nephrolithotomy (SMP): a new concept in technique and instrumentation.

PubMed

Zeng, Guohua; Wan, ShawPong; Zhao, Zhijian; Zhu, Jianguo; Tuerxun, Aierken; Song, Chao; Zhong, Liang; Liu, Ming; Xu, Kewei; Li, Hulin; Jiang, Zhiqiang; Khadgi, Sanjay; Pal, Shashi K; Liu, Jianjun; Zhang, Guoxi; Liu, Yongda; Wu, Wenqi; Chen, Wenzhong; Sarica, Kemal

2016-04-01

To present a novel miniature endoscopic system designed to improve the safety and efficacy of percutaneous nephrolithotomy, named the 'super-mini percutaneous nephrolithotomy' (SMP). The endoscopic system consists of a 7-F nephroscope with enhanced irrigation and a modified 10-14 F access sheath with a suction-evacuation function. This system was tested in patients with renal stones of <2.5 cm, in a multicentre prospective non-randomised clinical trial. In all, 146 patients were accrued in 14 centres. Nephrostomy tract dilatation was carried out to 10-14 F. The lithotripsy was performed using either a Holmium laser or pneumatic lithotripter. A nephrostomy tube or JJ stent was placed only if clinically indicated. SMP was completed successfully in 141 of 146 patients. Five patients required conversion to larger nephrostomy tracts. The mean (sd) stone size was 2.2 (0.6) cm and the mean operative duration was 45.6 min. The initial stone-free rate (SFR) was 90.1%. The SFR at the 3-month follow-up was 95.8%. Three patients required auxiliary procedures for residual stones. Complications occurred in 12.8% of the patients, all of which were Clavien grade ≤II and no transfusions were needed. In all, 72.3% of the patients did not require any kind of catheter, while 19.8% had JJ stents and 5.7% had nephrostomy tubes placed. The mean hospital stay was 2.1 days. SMP is a safe and effective treatment for renal stones of <2.5 cm. SMP may be particularly suitable for patients with lower pole stones and stones that ae not amenable to retrograde intrarenal surgery. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

Microbial Transformation of Biomacromolecules in a Membrane Bioreactor: Implications for Membrane Fouling Investigation

PubMed Central

Zhou, Zhongbo; Meng, Fangang; Chae, So-Ryong; Huang, Guocheng; Fu, Wenjie; Jia, Xiaoshan; Li, Shiyu; Chen, Guang-Hao

2012-01-01

Background The complex characteristics and unclear biological fate of biomacromolecules (BMM), including colloidal and soluble microbial products (SMP), extracellular polymeric substances (EPS) and membrane surface foulants (MSF), are crucial factors that limit our understanding of membrane fouling in membrane bioreactors (MBRs). Findings In this study, the microbial transformation of BMM was investigated in a lab-scale MBR by well-controlled bioassay tests. The results of experimental measurements and mathematical modeling show that SMP, EPS, and MSF had different biodegradation behaviors and kinetic models. Based on the multi-exponential G models, SMP were mainly composed of slowly biodegradable polysaccharides (PS), proteins (PN), and non-biodegradable humic substances (HS). In contrast, EPS contained a large number of readily biodegradable PN, slowly biodegradable PS and HS. MSF were dominated by slowly biodegradable PS, which had a degradation rate constant similar to that of SMP-PS, while degradation behaviors of MSF-PN and MSF-HS were much more similar to those of EPS-PN and EPS-HS, respectively. In addition, the large-molecular weight (MW) compounds (>100 kDa) in BMM were found to have a faster microbial transformation rate compared to the small-MW compounds (<5 kDa). The parallel factor (PARAFAC) modeling of three-dimensional fluorescence excitation-emission matrix (EEM) spectra showed that the tryptophan-like PN were one of the major fractions in the BMM and they were more readily biodegradable than the HS. Besides microbial mineralization, humification and hydrolysis could be viewed as two important biotransformation mechanisms of large-MW compounds during the biodegradation process. Significance The results of this work can aid in tracking the origin of membrane foulants from the perspective of the biotransformation behaviors of SMP, EPS, and MSF. PMID:22912694

An investigation of a thermally steerable electroactive polymer/shape memory polymer hybrid actuator

NASA Astrophysics Data System (ADS)

Ren, Kailiang; Bortolin, Robert S.; Zhang, Q. M.

2016-02-01

This paper investigates the thermal response of a hybrid actuator composed of an electroactive polymer (EAP) and a shape memory polymer (SMP). This study introduces the concept of using the large strain from a phase transition (ferroelectric to paraelectric phase) induced by temperature change in a poly(vinylidene fluoride-trifluoroethylene) film to tune the shape of an SMP film above its glass transition temperature (Tg). Based on the material characterization data, it is revealed that the thickness ratio of the EAP/SMP films plays a critical role in the displacement of the actuator. Further, it is also demonstrated that the displacement of the hybrid actuator can be tailored by varying the temperature, and finite element method simulation results fit well with the measurement data. This specially designed hybrid actuator shows great promise for future morphing aircraft applications.

The Development of Geometri Teaching Materials Based on Constructivism to Improve the Students' Mathematic Reasoning Ability through Cooperative Learing Jigsaw at the Class VIII of SMP Negeri 3 Padangsidimpuan

ERIC Educational Resources Information Center

Dewi, Izwita; Harahap, Muhammad Syahri

2016-01-01

The purposes of this research were to know the validity, practicality, and effectivity of geometrical learning material based on the constructivism to Increase students' mathematic reasoning ability and increasing students' mathematic reasoning ability by using learning material at the grade VIII of SMP Negeri 3 Padangsidimpuan. Type of the…

Recall accuracy of mobile phone calls among Japanese young people.

PubMed

Kiyohara, Kosuke; Wake, Kanako; Watanabe, Soichi; Arima, Takuji; Sato, Yasuto; Kojimahara, Noriko; Taki, Masao; Yamaguchi, Naohito

2016-11-01

This study aimed to elucidate the recall accuracy of mobile phone calls among young people using new software-modified phone (SMP) technology. A total of 198 Japanese students aged between 10 and 24 years were instructed to use a SMP for 1 month to record their actual call statuses. Ten to 12 months after this period, face-to-face interviews were conducted to obtain the self-reported call statuses during the monitoring period. Using the SMP record as the gold standard of validation, the recall accuracy of phone calls was evaluated. A total of 19% of the participants (34/177) misclassified their laterality (i.e., the dominant side of ear used while making calls), with the level of agreement being moderate (κ-statistics, 0.449). The level of agreement between the self-reports and SMP records was relatively good for the duration of calls (Pearson's r, 0.620), as compared with the number of calls (Pearson's r, 0.561). The recall was prone to small systematic and large random errors for both the number and duration of calls. Such a large random recall error for the amount of calls and misclassification of laterality suggest that the results of epidemiological studies of mobile phone use based on self-assessment should be interpreted cautiously.

The effect of moisture absorption on the physical properties of polyurethane shape memory polymer foams.

PubMed

Yu, Ya-Jen; Hearon, Keith; Wilson, Thomas S; Maitland, Duncan J

2011-08-01

The effect of moisture absorption on the glass transition temperature (T(g)) and stress/strain behavior of network polyurethane shape memory polymer (SMP) foams has been investigated. With our ultimate goal of engineering polyurethane SMP foams for use in blood contacting environments, we have investigated the effects of moisture exposure on the physical properties of polyurethane foams. To our best knowledge, this study is the first to investigate the effects of moisture absorption at varying humidity levels (non-immersion and immersion) on the physical properties of polyurethane SMP foams. The SMP foams were exposed to differing humidity levels for varying lengths of time, and they exhibited a maximum water uptake of 8.0% (by mass) after exposure to 100% relative humidity for 96 h. Differential scanning calorimetry results demonstrated that water absorption significantly decreased the T(g) of the foam, with a maximum water uptake shifting the T(g) from 67 °C to 5 °C. Samples that were immersed in water for 96 h and immediately subjected to tensile testing exhibited 100% increases in failure strains and 500% decreases in failure stresses; however, in all cases of time and humidity exposure, the plasticization effect was reversible upon placing moisture-saturated samples in 40% humidity environments for 24 h.

The effect of moisture absorption on the physical properties of polyurethane shape memory polymer foams

PubMed Central

Yu, Ya-Jen; Hearon, Keith; Wilson, Thomas S.; Maitland, Duncan J.

2011-01-01

The effect of moisture absorption on the glass transition temperature (Tg) and stress/strain behavior of network polyurethane shape memory polymer (SMP) foams has been investigated. With our ultimate goal of engineering polyurethane SMP foams for use in blood contacting environments, we have investigated the effects of moisture exposure on the physical properties of polyurethane foams. To our best knowledge, this study is the first to investigate the effects of moisture absorption at varying humidity levels (non-immersion and immersion) on the physical properties of polyurethane SMP foams. The SMP foams were exposed to differing humidity levels for varying lengths of time, and they exhibited a maximum water uptake of 8.0% (by mass) after exposure to 100% relative humidity for 96 h. Differential scanning calorimetry results demonstrated that water absorption significantly decreased the Tg of the foam, with a maximum water uptake shifting the Tg from 67 °C to 5 °C. Samples that were immersed in water for 96 h and immediately subjected to tensile testing exhibited 100% increases in failure strains and 500% decreases in failure stresses; however, in all cases of time and humidity exposure, the plasticization effect was reversible upon placing moisture-saturated samples in 40% humidity environments for 24 h. PMID:21949469

The effect of moisture absorption on the physical properties of polyurethane shape memory polymer foams

NASA Astrophysics Data System (ADS)

Yu, Ya-Jen; Hearon, Keith; Wilson, Thomas S.; Maitland, Duncan J.

2011-08-01

The effect of moisture absorption on the glass transition temperature (Tg) and the stress/strain behavior of network polyurethane shape memory polymer (SMP) foams has been investigated. With our ultimate goal of engineering polyurethane SMP foams for use in blood-contacting environments, we have investigated the effects of moisture exposure on the physical properties of polyurethane foams. To the best of our knowledge, this study is the first to investigate the effects of moisture absorption at varying humidity levels (non-immersion and immersion) on the physical properties of polyurethane SMP foams. The SMP foams were exposed to differing humidity levels for varying lengths of time, and they exhibited a maximum water uptake of 8.0% (by mass) after exposure to 100% relative humidity for 96 h. Differential scanning calorimetry results demonstrated that water absorption significantly decreased the Tg of the foam, with a maximum water uptake shifting the Tg from 67 to 5 °C. Samples that were immersed in water for 96 h and immediately subjected to tensile testing exhibited 100% increases in failure strains and 500% decreases in failure stresses; however, in all cases of time and humidity exposure, the plasticization effect was reversible upon placing moisture-saturated samples in 40% humidity environments for 24 h.

Evaluation of a self-management programme for patients with chronic obstructive pulmonary disease.

PubMed

Turner, Ap; Anderson, Jk; Wallace, Lm; Kennedy-Williams, P

2014-06-30

Self-management is becoming an important part of treatment for patients with chronic obstructive pulmonary disease (COPD). We conducted a longitudinal survey of patients with COPD who attended a 7-week group-based lay and clinician co-delivered COPD self-management programme (SMP)to see whether they became more activated, enjoyed better health status, and quality of life, were less psychologically distressed and improved their self-management abilities. The main analysis was a per-protocol analysis (N = 131), which included only patients who attended ≥5 SMP sessions and who returned a 6-month follow-up questionnaires. Changes in the mean values of the patient outcomes were compared over time using paired t tests and general linear model for repeated measures. Patient activation significantly improved 6 months after the SMP (p < 0.001). There were also significant improvements in COPD mastery (p = 0.001) and significant improvements in a range of self-management abilities (self-monitoring and insight p = 0.03), constructive attitude shift (p = 0.04), skills and technique acquisition, (p < 0.001)). This study showed that a lay and clinician-led SMP for patients with COPD has the potential to produce improvements in important outcomes such as activation, mastery and self-management abilities. © The Author(s) 2014.

Computer-Aided Parallelizer and Optimizer

NASA Technical Reports Server (NTRS)

Jin, Haoqiang

2011-01-01

The Computer-Aided Parallelizer and Optimizer (CAPO) automates the insertion of compiler directives (see figure) to facilitate parallel processing on Shared Memory Parallel (SMP) machines. While CAPO currently is integrated seamlessly into CAPTools (developed at the University of Greenwich, now marketed as ParaWise), CAPO was independently developed at Ames Research Center as one of the components for the Legacy Code Modernization (LCM) project. The current version takes serial FORTRAN programs, performs interprocedural data dependence analysis, and generates OpenMP directives. Due to the widely supported OpenMP standard, the generated OpenMP codes have the potential to run on a wide range of SMP machines. CAPO relies on accurate interprocedural data dependence information currently provided by CAPTools. Compiler directives are generated through identification of parallel loops in the outermost level, construction of parallel regions around parallel loops and optimization of parallel regions, and insertion of directives with automatic identification of private, reduction, induction, and shared variables. Attempts also have been made to identify potential pipeline parallelism (implemented with point-to-point synchronization). Although directives are generated automatically, user interaction with the tool is still important for producing good parallel codes. A comprehensive graphical user interface is included for users to interact with the parallelization process.

Influence of mechanically-induced dilatation on the shape memory behavior of amorphous polymers at large deformation

NASA Astrophysics Data System (ADS)

Hanzon, Drew W.; Lu, Haibao; Yakacki, Christopher M.; Yu, Kai

2018-01-01

In this study, we explore the influence of mechanically-induced dilatation on the thermomechanical and shape memory behavior of amorphous shape memory polymers (SMPs) at large deformation. The uniaxial tension, glass transition, stress relaxation and free recovery behaviors are examined with different strain levels (up to 340% engineering strain). A multi-branched constitutive model that incorporates dilatational effects on the polymer relaxation time is established and applied to assist in discussions and understand the nonlinear viscoelastic behaviors of SMPs. It is shown that the volumetric dilatation results in an SMP network with lower viscosity, faster relaxation, and lower Tg. The influence of the dilatational effect on the thermomechanical behaviors is significant when the polymers are subject to large deformation or in a high viscosity state. The dilation also increases the free recovery rate of SMP at a given recovery temperature. Even though the tested SMPs are far beyond their linear viscoelastic region when a large programming strain is applied, the free recovery behavior still follows the time-temperature superposition (TTSP) if the dilatational effect is considered during the transformation of time scales; however, if the programming strain is different, TTSP fails in predicting the recovery behavior of SMPs because the network has different entropy state and driving force during shape recovery. Since most soft active polymers are subject to large deformation in practice, this study provides a theoretical basis to better understand their nonlinear viscoelastic behaviors, and optimize their performance in engineering applications.

Comment on "Photo-assisted degradation of 2, 4, 6-trichlorophenol by an advanced reduction process based on sulfite anion radical: Degradation, dechlorination and mineralization" [Chemosphere 191 (2018) 156-165].

PubMed

Tang, Min

2018-07-01

The sulfite-mediated photoreduction (SMP) with UV-C light showed promising performances especially for dechlorination of chlorinated organic compounds (e.g., 2, 4, 6-trichlorophenol (TCP)). The investigation of SMP for TCP is commented and proposed in order to clarify the mechanisms involved. Copyright © 2018 Elsevier Ltd. All rights reserved.

Biomass viability: An experimental study and the development of an empirical mathematical model for submerged membrane bioreactor.

PubMed

Zuthi, M F R; Ngo, H H; Guo, W S; Nghiem, L D; Hai, F I; Xia, S Q; Zhang, Z Q; Li, J X

2015-08-01

This study investigates the influence of key biomass parameters on specific oxygen uptake rate (SOUR) in a sponge submerged membrane bioreactor (SSMBR) to develop mathematical models of biomass viability. Extra-cellular polymeric substances (EPS) were considered as a lumped parameter of bound EPS (bEPS) and soluble microbial products (SMP). Statistical analyses of experimental results indicate that the bEPS, SMP, mixed liquor suspended solids and volatile suspended solids (MLSS and MLVSS) have functional relationships with SOUR and their relative influence on SOUR was in the order of EPS>bEPS>SMP>MLVSS/MLSS. Based on correlations among biomass parameters and SOUR, two independent empirical models of biomass viability were developed. The models were validated using results of the SSMBR. However, further validation of the models for different operating conditions is suggested. Copyright © 2015 Elsevier Ltd. All rights reserved.

Interference by the activated sludge matrix on the analysis of soluble microbial products in wastewater.

PubMed

Potvin, Christopher M; Zhou, Hongde

2011-11-01

The objective of this study was to demonstrate the effects of complex matrix effects caused by chemical materials on the analysis of key soluble microbial products (SMP) including proteins, humics, carbohydrates, and polysaccharides in activated sludge samples. Emphasis was placed on comparison of the commonly used standard curve technique with standard addition (SA), a technique that differs in that the analytical responses are measured for sample solutions spiked with known quantities of analytes. The results showed that using SA provided a great improvement in compensating for SMP recovery and thus improving measurement accuracy by correcting for matrix effects. Analyte recovery was found to be highly dependent on sample dilution, and changed due to extraction techniques, storage conditions and sample composition. Storage of sample extracts by freezing changed SMP concentrations dramatically, as did storage at 4°C for as little as 1d. Copyright © 2011 Elsevier Ltd. All rights reserved.

Real-time intravital imaging of pH variation associated with osteoclast activity.

PubMed

Maeda, Hiroki; Kowada, Toshiyuki; Kikuta, Junichi; Furuya, Masayuki; Shirazaki, Mai; Mizukami, Shin; Ishii, Masaru; Kikuchi, Kazuya

2016-08-01

Intravital imaging by two-photon excitation microscopy (TPEM) has been widely used to visualize cell functions. However, small molecular probes (SMPs), commonly used for cell imaging, cannot be simply applied to intravital imaging because of the challenge of delivering them into target tissues, as well as their undesirable physicochemical properties for TPEM imaging. Here, we designed and developed a functional SMP with an active-targeting moiety, higher photostability, and a fluorescence switch and then imaged target cell activity by injecting the SMP into living mice. The combination of the rationally designed SMP with a fluorescent protein as a reporter of cell localization enabled quantitation of osteoclast activity and time-lapse imaging of its in vivo function associated with changes in cell deformation and membrane fluctuations. Real-time imaging revealed heterogenic behaviors of osteoclasts in vivo and provided insights into the mechanism of bone resorption.

SMI Compatible Simulation Scheduler Design for Reuse of Model Complying with Smp Standard

NASA Astrophysics Data System (ADS)

Koo, Cheol-Hea; Lee, Hoon-Hee; Cheon, Yee-Jin

2010-12-01

Software reusability is one of key factors which impacts cost and schedule on a software development project. It is very crucial also in satellite simulator development since there are many commercial simulator models related to satellite and dynamics. If these models can be used in another simulator platform, great deal of confidence and cost/schedule reduction would be achieved. Simulation model portability (SMP) is maintained by European Space Agency and many models compatible with SMP/simulation model interface (SMI) are available. Korea Aerospace Research Institute (KARI) is developing hardware abstraction layer (HAL) supported satellite simulator to verify on-board software of satellite. From above reasons, KARI wants to port these SMI compatible models to the HAL supported satellite simulator. To port these SMI compatible models to the HAL supported satellite simulator, simulation scheduler is preliminary designed according to the SMI standard.

In vivo tissue response following implantation of shape memory polyurethane foam in a porcine aneurysm model

PubMed Central

Rodriguez, Jennifer N.; Clubb, Fred J.; Wilson, Thomas S.; Miller, Matthew W.; Fossum, Theresa W.; Hartman, Jonathan; Tuzun, Egemen; Singhal, Pooja; Maitland, Duncan J.

2014-01-01

Cerebral aneurysms treated by traditional endovascular methods using platinum coils have a tendency to be unstable, either due to chronic inflammation, compaction of coils, or growth of the aneurysm. We propose to use alternate filling methods for the treatment of intracranial aneurysms using polyurethane based shape memory polymer (SMP) foams. SMP polyurethane foams were surgically implanted in a porcine aneurysm model to determine biocompatibility, localized thrombogenicity, and their ability to serve as a stable filler material within an aneurysm. The degree of healing was evaluated via gross observation, histopathology and low vacuum scanning electron microscopy (LV-SEM) imaging after zero, thirty and ninety days. Clotting was initiated within the SMP foam at time zero (less than one hour exposure to blood prior to euthanization), partial healing was observed at thirty days, and almost complete healing had occurred at ninety days in vivo, with minimal inflammatory response. PMID:23650278

In vivo response to an implanted shape memory polyurethane foam in a porcine aneurysm model.

PubMed

Rodriguez, Jennifer N; Clubb, Fred J; Wilson, Thomas S; Miller, Matthew W; Fossum, Theresa W; Hartman, Jonathan; Tuzun, Egemen; Singhal, Pooja; Maitland, Duncan J

2014-05-01

Cerebral aneurysms treated by traditional endovascular methods using platinum coils have a tendency to be unstable, either due to chronic inflammation, compaction of coils, or growth of the aneurysm. We propose to use alternate filling methods for the treatment of intracranial aneurysms using polyurethane-based shape memory polymer (SMP) foams. SMP polyurethane foams were surgically implanted in a porcine aneurysm model to determine biocompatibility, localized thrombogenicity, and their ability to serve as a stable filler material within an aneurysm. The degree of healing was evaluated via gross observation, histopathology, and low vacuum scanning electron microscopy imaging after 0, 30, and 90 days. Clotting was initiated within the SMP foam at time 0 (<1 h exposure to blood before euthanization), partial healing was observed at 30 days, and almost complete healing had occurred at 90 days in vivo, with minimal inflammatory response. Copyright © 2013 Wiley Periodicals, Inc.

Parallel, Distributed Scripting with Python

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, P J

2002-05-24

Parallel computers used to be, for the most part, one-of-a-kind systems which were extremely difficult to program portably. With SMP architectures, the advent of the POSIX thread API and OpenMP gave developers ways to portably exploit on-the-box shared memory parallelism. Since these architectures didn't scale cost-effectively, distributed memory clusters were developed. The associated MPI message passing libraries gave these systems a portable paradigm too. Having programmers effectively use this paradigm is a somewhat different question. Distributed data has to be explicitly transported via the messaging system in order for it to be useful. In high level languages, the MPI librarymore » gives access to data distribution routines in C, C++, and FORTRAN. But we need more than that. Many reasonable and common tasks are best done in (or as extensions to) scripting languages. Consider sysadm tools such as password crackers, file purgers, etc ... These are simple to write in a scripting language such as Python (an open source, portable, and freely available interpreter). But these tasks beg to be done in parallel. Consider the a password checker that checks an encrypted password against a 25,000 word dictionary. This can take around 10 seconds in Python (6 seconds in C). It is trivial to parallelize if you can distribute the information and co-ordinate the work.« less

Thermomechanical Characterization of Shape Memory Polymers using High Temperature Nanoindentation

DTIC Science & Technology

2010-01-01

Beake and Smith [17] have reported high temperature nano- indentation experiments on fused silica and soda – lime glass . Volinsky et al. [18] and Sawant...activated at room temperature. A large amount of ‘‘sink-in’’ is observed at the SMP surface when activated at temperatures above its glass transition...should be above thematerial’s glass transition temperature, Tg. Secondly, the constrained SMP is cooled to the storage temperature, Ts, which is below

Biocompatibility and tissue integration of a novel shape memory surgical mesh for ventral hernia: In vivo animal studies

PubMed Central

Zimkowski, Michael M.; Rentschler, Mark E.; Schoen, Jonathan A.; Mandava, Nageswara; Shandas, Robin

2014-01-01

Approximately 400,000 ventral hernia repair surgeries are performed each year in the United States. Many of these procedures are performed using laparoscopic minimally invasive techniques and employ the use of surgical mesh. The use of surgical mesh has been shown to reduce recurrence rates compared to standard suture repairs. The placement of surgical mesh in a ventral hernia repair procedure can be challenging, and may even complicate the procedure. Others have attempted to provide commercial solutions to the problems of mesh placement, but these have not been well accepted by the clinical community. In this article, two versions of shape memory polymer (SMP)-modified surgical mesh, and unmodified surgical mesh, were compared by performing laparoscopic manipulation in an acute porcine model. Also, SMP-integrated polyester surgical meshes were implanted in four rats for 30–33 days to evaluate chronic biocompatibility and capacity for tissue integration. Porcine results show that the modified mesh provides a controlled, temperature-activated, automated deployment when compared to an unmodified mesh. In rats, results indicate that implanted SMP-modified meshes exhibit exceptional biocompatibility and excellent integration with surrounding tissue with no noticeable differences from the unmodified counterpart. This article provides further evidence that an SMP-modified surgical mesh promises reduction in surgical placement time and that such a mesh is not substantially different from unmodified meshes in chronic biocompatibility. PMID:24327401

Back-streaming ion beam measurements in a Self Magnetic Insulated (SMP) electron diode

NASA Astrophysics Data System (ADS)

Mazarakis, Michael; Johnston, Mark; Kiefer, Mark; Leckbee, Josh; Webb, Timothy; Bennett, Nichelle; Droemer, Darryl; Welch, Dale; Nielsen, Dan; Ziska, Derek; Wilkins, Frank; Advance radiography department Team

2014-10-01

A self-magnetic pinch diode (SMP) is presently the electron diode of choice for high energy flash x-ray radiography utilizing pulsed power drivers. The Sandia National Laboratories RITS accelerator is presently fit with an SMP diode that generates very small electron beam spots. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The diode's anode is made of high Z metal in order to produce copious and energetic flash x-rays for radiographic imaging of high areal density objects. In any high voltage inductive voltage adder (IVA) utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the anode-cathode (A-K) gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (~1 cm) and the diode region very hostile. We are currently measuring the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip. We then are evaluating the A-K gap voltage by ion time of flight measurements supplemented with filtered Rogowski coils. Sandia is a multiprogram laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract No. DE- AC04-94AL850.

Testing the link between sympathetic efferent and sensory afferent fibers in neuropathic pain

PubMed Central

Raja, Srinivasa N.; Treede, Rolf-Detlef

2012-01-01

The diagnosis of sympathetically maintained pain (SMP) is typically established by assessment of pain relief during local anesthetic blockade of the sympathetic ganglia that innervate the painful body part. To determine if systemic alpha-adrenergic blockade with phentolamine can be used to diagnose SMP, we compared the effects on pain of local anesthetic sympathetic ganglion blocks (LASB) and phentolamine blocks (PhB) in 20 patients with chronic pain and hyperalgesia that were suspected to be sympathetically maintained. The blocks were done in random order on separate days. Patients rated the intensity of ongoing and stimulus-evoked pain every 5 min before, during, and after the LASB and PhB. Patients and the investigator assessing pain levels were blinded to the time of intravenous administration of phentolamine (total dose 25-35 mg). The pain relief achieved by LASB and PhB correlated closely (r = 0.84), and there was no significant difference in the maximum pain relief achieved with the two blocks (t = 0.19, P greater than 0.8). Nine patients experienced a greater than 50% relief of pain and hyperalgesia from both LASB and PhB and were considered to have a clinically significant component of SMP. We conclude that alpha-adrenergic blockade with intravenous phentolamine is a sensitive alternative test to identify patients with SMP. PMID:22592181

AGARD standard aeroelastic configurations for dynamic response. 1: Wing 445.6

NASA Technical Reports Server (NTRS)

Yates, E. Carson, Jr.

1988-01-01

This report contains experimental flutter data for the AGARD 3-D swept tapered standard configuration Wing 445.6, along with related descriptive data of the model properties required for comparative flutter calculations. As part of a cooperative AGARD-SMP program, guided by the Sub-Committee on Aeroelasticity, this standard configuration may serve as a common basis for comparison of calculated and measured aeroelastic behavior. These comparisons will promote a better understanding of the assumptions, approximations and limitations underlying the various aerodynamic methods applied, thus pointing the way to further improvements.

Beslisbevoegdheden en Verantwoordelijkheden van de Uitgestegen Soldaat. Deel A: Verplaatsen van Beslisbevoegdheden (Authority and Responsibility of the Dismounted Soldier. Part A. Empowering the Dismounted Soldier)

DTIC Science & Technology

2007-04-01

en verantwoordelijkheden van de uitgestegen soldaat Deel A: verplaatsen van beslisbevoegdheden Datumn april 2007 Auteur (s) R. de Bruin ITE. van Bernmel...Admiraal, Bureau SMP Auteur (s) R. de Bruin Program maleider Projectleider I.E. van Bemnmel dr. W.A. Lotens, A.J. van Vliet, A.J. van Vijet TNO Defensie en...Leadership Theory en wordt relevant geacht voor de ontvangers van aanvullende beslisbevoegdheden. 2.1.3 Het oogmerk van de hogere commandant Een ander

Thiabendazole uptake and storage performance of cactus pear [Opuntia ficus-indica (L.) Mill. Cv Gialla] fruit following postharvest treatments with reduced doses of fungicide at 52 degrees C.

PubMed

Schirra, Mario; Brandolini, Vincenzo; Cabras, Paolo; Angioni, Alberto; Inglese, Paolo

2002-02-13

The storage response of cactus pears [Opuntia ficus-indica Miller (L.) cv. Gialla] was investigated over 6 weeks at 6 degrees C, plus an additional week of simulated marketing period (SMP) at 20 degrees C, after a 3-min dip treatment with thiabendazole (TBZ) at 1000 mg/L at 20 degrees C or 150 mg/L TBZ at 52 degrees C. Untreated fruits were used as control. Following TBZ treatments at 20 and 52 degrees C, total residues were recovered from the peel of cactus pear, as the concentration of residues in the pulp was negligible. Treatments with 1000 mg/L TBZ at 20 degrees C resulted in a 2.82 mg/kg residue uptake (active ingredient, whole-fruit basis), whereas treatment at 150 mg/L TBZ left 1.09 mg/kg. TBZ showed great persistence over both storage and SMP: on average, in the fruits treated at 20 and 52 degrees C, over 72 and 68%, respectively, of TBZ was still present after SMP. Postharvest treatments with 1000 mg/L TBZ at room temperature did not affect the expression of slight-to-moderate chilling injury (CI), but reduced severe CI by approximately 50% and decay development by 63.4% in comparison to those of untreated fruit after SMP. The effectiveness of TBZ was much higher with the treatment at 150 mg/L TBZ at 52 degrees C, providing 91% control of severe CI and approximately 89% suppression of decay; no treatment damage occurred during storage and SMP. External appearance was better in fruit treated with 150 mg/L TBZ at 52 degrees C. Respiration rate, titratable acidity, soluble solids concentration, and acetaldehyde in the flesh were not significantly influenced by treatments. Ethylene production rate and ethanol levels in the flesh were significantly higher in the TBZ-treated fruit as opposed to those in the untreated control fruit.

Synaptic protein changes after a chronic period of sensorimotor perturbation in adult rats: a potential role of phosphorylation/O-GlcNAcylation interplay.

PubMed

Fourneau, Julie; Canu, Marie-Hélène; Cieniewski-Bernard, Caroline; Bastide, Bruno; Dupont, Erwan

2018-05-28

In human, a chronic sensorimotor perturbation (SMP) through prolonged body immobilization alters motor task performance through a combination of peripheral and central factors. Studies performed on a rat model of SMP have shown biomolecular changes and a reorganization of sensorimotor cortex through events such as morphological modifications of dendritic spines (number, length, functionality). However, underlying mechanisms are still unclear. It is well known that phosphorylation regulates a wide field of synaptic activity leading to neuroplasticity. Another post-translational modification that interplays with phosphorylation is O-GlcNAcylation. This atypical glycosylation, reversible and dynamic, is involved in essential cellular and physiological processes such as synaptic activity, neuronal morphogenesis, learning and memory. We examined potential roles of phosphorylation/O-GlcNAcylation interplay in synaptic plasticity within rat sensorimotor cortex after a SMP period. For this purpose, sensorimotor cortex synaptosomes were separated by sucrose gradient, in order to isolate a subcellular compartment enriched in proteins involved in synaptic functions. A period of SMP induced plastic changes at the pre- and postsynaptic levels, characterized by a reduction of phosphorylation (synapsin1, AMPAR GluA2) and expression (synaptophysin, PSD-95, AMPAR GluA2) of synaptic proteins, as well as a decrease in MAPK/ERK42 activation. Expression levels of OGT/OGA enzymes was unchanged but we observed a specific reduction of synapsin1 O-GlcNAcylation in sensorimotor cortex synaptosomes. The synergistic regulation of synapsin1 phosphorylation/O-GlcNAcylation could affect presynaptic neurotransmitter release. Associated with other pre- and postsynaptic changes, synaptic efficacy could be impaired in somatosensory cortex of SMP rat. Thus, synapsin1 O-GlcNAcylation/phosphorylation interplay also appears to be involved in this synaptic plasticity by finely regulating neural activity. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Inhibition of Schistosoma mansoni ether-a-go-go related gene-encoded potassium channels leads to hypermotility and impaired egg production.

PubMed

Parker-Manuel, S J; Hahnel, S; Grevelding, C G

2015-11-01

The purpose of this work was to investigate the effect of ether-a-go-go related gene (ERG) potassium channel inhibition on Schistosoma mansoni. Use of dofetilide to block the schistosome ERGs resulted in a striking 'corkscrew' effect. The worms were unable to control their motility; they were hypermotile. The treated worms produced abnormal eggs, some of which consisted of little more than a spine. One of the S. mansoni ERGs (SmERGs), Smp_161140, was chosen for further study by RNAi. The transcript was knocked down to 50% compared to the controls. These RNAi-treated worms demonstrated seizure-like movements. In S. mansoni, as in other organisms, ERG channels seem to play a role in regulating muscle excitability. This work shows that egg production can be greatly reduced by effectively targeting muscle coordination in these important parasites. Copyright © 2015 Elsevier Inc. All rights reserved.

Effects of fiber pre-strain on the healing efficiency of thermoset polymers

NASA Astrophysics Data System (ADS)

Ajisafe, Oludayo

One major challenge that has been facing material self healing is how to heal bigger macroscopic or structural scale damage autonomously, repeatedly, efficiently and at molecular length scale. Different approaches have been used to heal materials. However, none of them can heal macroscopic cracks. Our research group has proposed a novel shape-memory polymer (SMP) based, bio-inspired Close-Then-Heal (CTH) scheme to heal macroscopic cracks in SMP matrix. The most recent development in our group is to use SMP fibers to heal conventional thermosetting polymers according to the CTH scheme. The aim of this study is to further investigate the effect of pre-tension of SMP fibers during the cold-drawing programming on the self-healing efficiency of the conventional thermosetting polymer composites. This was done by fabricating a composite with thermoplastic particles (polycaprolactone) dispersed in a thermosetting polymer matrix (Epon 828). Shape memory fiber pre-tensioned into 3 different groups of 0%, 50% and 100% prestrain, was also embedded into the composite in the longitudinal direction. In this composite, the shape memory effect of the shape memory fibers is utilized for sealing (closing) the cracks and the thermoplastic particles are used for molecular-length scale healing. In this study, 7% by volume of thermoplastic particles was used. Beam specimens were prepared and controlled structural length scale damage was created prior to curing by inserting an aluminum foil of designed thickness in a perpendicular direction to the shape memory fibers before the matrix was allowed to cure. The aluminum sheet was removed post cure to leave a controlled damage. The specimen was healed by fixing the two ends of the beam and heating the sample above the Tg of the shape memory fiber. The recovery force of the sample was recorded and then the beam was tested again to fracture. This fracture healing cycle lasted 7 times. The healing efficiency was evaluated per the peak-tensile load. The Ultrasonic C-scan and SEM were used to examine the healed cracks. It was found that the beams with 100% pre-strained fiber were able to recover repeatedly about 50% of its peak tensile strength; the beams with 50% pre-strained fiber, 43%; and the beams with un-stretched fibers were able to recover about 21% of its original peak tensile strength. Also it was found that the higher the pre-tension the higher the recovery stress seen during the healing cycle.

A model for improving the health and quality of life of single mothers in the developing world.

PubMed

Mainthia, Rajshri; Reppart, Laura; Reppart, Jim; Pearce, Elizabeth C; Cohen, Jordan J; Netterville, James L

2013-12-01

Among the impoverished population of coastal Kenya, there is a rapidly growing group of young single mothers who suffer from adverse health outcomes, incomplete schooling, social ostracism by their communities, and economic hardship. To address this problem, in 2008 the Single Mothers Program (SMP) selected a group of vulnerable single mothers, provided them with basic relief and education, equipped them with training and start-up capital to run their own businesses, and assessed the impact of the program via a pre- and post-implementation survey. After two years in the program, a majority of the single mothers increased their contraceptive use, increased their degree of literacy, increased their individual incomes, and were more positively perceived by their communities. This study demonstrates a program model that can be used to improve the health and quality of life of single mothers and their children in similar communities throughout the world.

New functional biocarriers for enhancing the performance of a hybrid moving bed biofilm reactor-membrane bioreactor system.

PubMed

Deng, Lijuan; Guo, Wenshan; Ngo, Huu Hao; Zhang, Xinbo; Wang, Xiaochang C; Zhang, Qionghua; Chen, Rong

2016-05-01

In this study, new sponge modified plastic carriers for moving bed biofilm reactor (MBBR) was developed. The performance and membrane fouling behavior of a hybrid MBBR-membrane bioreactor (MBBR-MBR) system were also evaluated. Comparing to the MBBR with plastic carriers (MBBR), the MBBR with sponge modified biocarriers (S-MBBR) showed better effluent quality and enhanced nutrient removal at HRTs of 12h and 6h. Regarding fouling issue of the hybrid systems, soluble microbial products (SMP) of the MBR unit greatly influenced membrane fouling. The sponge modified biocarriers could lower the levels of SMP in mixed liquor and extracellular polymeric substances in activated sludge, thereby mitigating cake layer and pore blocking resistances of the membrane. The reduced SMP and biopolymer clusters in membrane cake layer were also observed. The results demonstrated that the sponge modified biocarriers were capable of improving overall MBBR performance and substantially alleviated membrane fouling of the subsequent MBR unit. Copyright © 2016 Elsevier Ltd. All rights reserved.

Implementation of poly(ε-caprolactone) sheet-based shape-memory polymer microvalves into plastic-based microfluidic devices

NASA Astrophysics Data System (ADS)

Jiang, Chenyang; Uto, Koichiro; Ebara, Mitsuhiro; Aoyagi, Takao; Ichiki, Takanori

2015-06-01

Implementation of shape-memory polymer (SMP) sheet-based microvalves into plastic-based microfluidic devices has been studied toward the use in disposable and mass producible micro total analysis devices. Poly(ε-caprolactone) (PCL) and poly(methyl methacrylate-co-styrene) (MS) were used as SMP and main substrate materials, respectively. Bonding between PCL sheets and MS plates was the critical issue in the practical implementation. We found the pristine PCL sheet has relatively rough surface with Ra of 85.14 nm, which is the cause of poor bonding. Hence, by introducing the post-anneal treatment with sandwiched between two flat glass plates, the PCL surface could be smoothed to Ra of 12.50 nm, and tight bonding could be obtained. Consequently, microfluidic devices consisting of plastic/PCL/plastic layers were successfully fabricated and therein the actuation of SMP valves without any leakage was demonstrated. The present technology is expected to be applicable to disposable microfluidic devices as required for point-of-care testing.

Influence of solids retention time on membrane fouling: characterization of extracellular polymeric substances and soluble microbial products.

PubMed

Duan, Liang; Tian, Zhiyong; Song, Yonghui; Jiang, Wei; Tian, Yuan; Li, Shan

2015-01-01

The objective of this study was to investigate the influence of solids retention time (SRT) on membrane fouling and the characteristics of biomacromolecules. Four identical laboratory-scale membrane bioreactors (MBRs) were operated with SRTs for 10, 20, 40 and 80 days. The results indicated that membrane fouling occurred faster and more readily under short SRTs. Fouling resistance was the primary source of filtration resistance. The modified fouling index (MFI) results suggested that the more ready fouling at short SRTs could be attributed to higher concentrations of soluble microbial products (SMP). Fourier transform infrared (FTIR) spectra indicated that the SRT had a weak influence on the functional groups of the total extracellular polymeric substances (TEPS) and SMP. However, the MBR under a short SRT had more low-molecular-weight (MW) compounds (<1 kDa) and fewer high-MW compounds (>100 kDa). Aromatic protein and tryptophan protein-like substances were the dominant groups in the TEPS and SMP, respectively.

The characteristics of extracellular polymeric substances and soluble microbial products in moving bed biofilm reactor-membrane bioreactor.

PubMed

Duan, Liang; Jiang, Wei; Song, Yonghui; Xia, Siqing; Hermanowicz, Slawomir W

2013-11-01

The characteristics of extracellular polymeric substances (EPS) and soluble microbial products (SMP) in conventional membrane bioreactor (MBR) and in moving bed biofilm reactor-membrane bioreactors (MBBR-MBR) were investigated in long-term (170 days) experiments. The results showed that all reactors had high removal efficiency of ammonium and COD, despite very different fouling conditions. The MBBR-MBR with media fill ratio of 26.7% had much lower total membrane resistance and no obvious fouling were detected during the whole operation. In contrast, MBR and MBBR-MBR with lower and higher media fill experienced more significant fouling. Low fouling at optimum fill ratio may be due to the higher percentage of small molecular size (<1 kDa) and lower percentage of large molecular size (>100 kDa) of EPS and SMP in the reactor. The composition of EPS and SMP affected fouling due to different O-H bonds in hydroxyl functional groups, and less polysaccharides and lipids. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of microencapsulated fat powders on rheological characteristics of biscuit dough and quality of biscuits.

PubMed

Sudha, M L; Chetana, R; Reddy, S Yella

2014-12-01

The effect of microencapsulated fat powders on the rheological characteristics and quality of biscuits were studied and compared with the control native fat normally used in the biscuit industry. Commercial bakery fat was encapsulated using sodium caseinate or skimmed milk powder (SMP) and the fat content in the powders was in the range of 73 - 78 % for sodium caseinate, whereas it ranged between 57.5 and 61 % with SMP and the sugar content was in the range of 9.8 - 17.5 %. The rheological characteristics indicated that with high sodium caseinate and SMP, the doughs were more elastic. The TPA analysis showed that with increasing the casein content in the fat powder, the dough hardness increased, and the doughs were less cohesive. The quality of biscuits was comparable with lower amount of encapsulating agents. Powders with lower amount of agents had comparable benefits on the rheological characteristics of the dough and biscuit quality.

Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite

NASA Astrophysics Data System (ADS)

Taya, Minoru; Liang, Yuanchang; Namli, Onur C.; Tamagawa, Hirohisa; Howie, Tucker

2013-10-01

The design of a reversible bending actuator based on a SMA/SMP composite is presented. The SMA/SMP composite is made of SMA NiTi wires with a bent ‘U’-shape in the austenite phase embedded in an epoxy SMP matrix which has a memorized flat shape. The bending motion is caused by heating the composite above TAf to activate the NiTi recovery. Upon cooling, the softening from the austenite to R-phase transformation results in a relaxation of the composite towards its original flat shape. In the three-point bending measurement the composite was able to exhibit a reversible deflection of 1.3 mm on a support with a 10 mm span. In addition, a material model for predicting the composite’s deflection is presented and predicts the experimental results reasonably well. The model also estimates the in-plane internal force and the degree of the SMA phase transformation.

Performance of the lysozyme for promoting the waste activated sludge biodegradability.

PubMed

He, Jun-Guo; Xin, Xiao-Dong; Qiu, Wei; Zhang, Jie; Wen, Zhi-Dan; Tang, Jian

2014-10-01

The fresh waste activated sludge (WAS) from a lab-scale sequencing batch reactor was used to determine the performance of the lysozyme for promoting its biodegradability. The results showed that a strict linear relationship presented between the degree of disintegration (DDM) of WAS and the lysozyme incubation time from 0 to 240min (R(2) was 0.992, 0.995 and 0.999 in accordance with the corresponding lysozyme/TS, respectively). Ratio of net SCOD increase augmented significantly by lysozyme digestion for evaluating the sludge biodegradability changes. Moreover, the protein dominated both in the EPS and SMP. In addition, the logarithm of SMP contents in supernatant presented an increasing trend similar with the ascending logarithmic relation with the lysozyme incubation time from 0 to 240min (R(2) was 0.960, 0.959 and 0.947, respectively). The SMP, especially the soluble protein, had an important contribution to the improvement of WAS biodegradability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effects of thinned young apple polyphenols on the quality of grass carp (Ctenopharyngodon idellus) surimi during cold storage.

PubMed

Sun, Lijun; Sun, Jiaojiao; Thavaraj, Pridhuvi; Yang, Xingbin; Guo, Yurong

2017-06-01

The aim of this study was to investigate the effects of young apple polyphenols (YAP) on the quality of grass cap surimi (GCS) during storage at 4°C. The addition of YAP into GCS was found to be effective in delaying lipid oxidation, soluble myofibrillar protein (SMP) degradation and changes of L ∗ , a ∗ and b ∗ values of GCS. Chlorogenic acid was screened to be the primary component showing preservative effects. YAP was shown to protect the functional properties of SMP during cold storage, retarding both the decrease in emulsifying activity and stability, and the increase in surface hydrophobicity of SMP. Additionally, the loss of gel strength and texture of GCS with YAP were significantly (P<0.05) lower than that of GCS without YAP during cold storage. Therefore, YAP may be developed as a natural antioxidant to maintain the quality and to extend the shelf life of freshwater fish surimi. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of a gamma camera system for the RITS-6 accelerator using the self-magnetic pinch diode

NASA Astrophysics Data System (ADS)

Webb, Timothy J.; Kiefer, Mark L.; Gignac, Raymond; Baker, Stuart A.

2015-08-01

The self-magnetic pinch (SMP) diode is an intense radiographic source fielded on the Radiographic Integrated Test Stand (RITS-6) accelerator at Sandia National Laboratories in Albuquerque, NM. The accelerator is an inductive voltage adder (IVA) that can operate from 2-10 MV with currents up to 160 kA (at 7 MV). The SMP diode consists of an annular cathode separated from a flat anode, holding the bremsstrahlung conversion target, by a vacuum gap. Until recently the primary imaging diagnostic utilized image plates (storage phosphors) which has generally low DQE at these photon energies along with other problems. The benefits of using image plates include a high-dynamic range, good spatial resolution, and ease of use. A scintillator-based X-ray imaging system or "gamma camera" has been fielded in front of RITS and the SMP diode which has been able to provide vastly superior images in terms of signal-to-noise with similar resolution and acceptable dynamic range.

Enhanced multimaterial 4D printing with active hinges

NASA Astrophysics Data System (ADS)

Akbari, Saeed; Hosein Sakhaei, Amir; Kowsari, Kavin; Yang, Bill; Serjouei, Ahmad; Yuanfang, Zhang; Ge, Qi

2018-06-01

Despite great progress in four-dimensional (4D) printing, i.e. three-dimensional (3D) printing of active (stimuli-responsive) materials, the relatively low actuation force of the 4D printed structures often impedes their engineering applications. In this study, we use multimaterial inkjet 3D printing technology to fabricate shape memory structures, including a morphing wing flap and a deployable structure, which consist of active and flexible hinges joining rigid (non-active) parts. The active hinges, printed from a shape memory polymer (SMP), lock the structure into a second temporary shape during a thermomechanical programming process, while the flexible hinges, printed from an elastomer, effectively increase the actuation force and the load-bearing capacity of the printed structure as reflected in the recovery ratio. A broad range of mechanical properties such as modulus and failure strain can be achieved for both active and flexible hinges by varying the composition of the two base materials, i.e. the SMP and the elastomer, to accommodate large deformation induced during programming step, and enhance the recovery in the actuating step. To find the important design parameters, including local deformation, shape fixity and recovery ratio, we conduct high fidelity finite element simulations, which are able to accurately predict the nonlinear deformation of the printed structures. In addition, a coupled thermal-electrical finite element analysis was performed to model the heat transfer within the active hinges during the localized Joule heating process. The model predictions showed good agreement with the measured temperature data and were used to find the major parameters affecting temperature distribution including the applied voltage and the convection rate.

Tunable thiol-epoxy shape memory polymer foams

NASA Astrophysics Data System (ADS)

Ellson, Gregory; Di Prima, Matthew; Ware, Taylor; Tang, Xiling; Voit, Walter

2015-05-01

Shape memory polymers (SMPs) are uniquely suited to a number of applications due to their shape storage and recovery abilities and the wide range of available chemistries. However, many of the desired performance properties are tied to the polymer chemistry which can make optimization difficult. The use of foaming techniques is one way to tune mechanical response of an SMP without changing the polymer chemistry. In this work, a novel thiol-epoxy SMP was foamed using glass microspheres (40 and 50% by volume Q-Cel 6019), using expandable polymer microspheres (1% 930 DU 120), and by a chemical blowing agent (1% XOP-341). Each approach created SMP foam with a differing density and microstructure from the others. Thermal and thermomechanical analysis was performed to observe the behavioral difference between the foaming techniques and to confirm that the glass transition (Tg) was relatively unchanged near 50 °C while the glassy modulus varied from 19.1 to 345 MPa and the rubbery modulus varied from 0.04 to 2.2 MPa. The compressive behavior of the foams was characterized through static compression testing at different temperatures, and cyclic compression testing at Tg. Constrained shape recovery testing showed a range of peak recovery stress from 5 MPa for the syntactic Q-Cel foams to ˜0.1 MPa for the chemically blown XOP-341 foam. These results showed that multiple foaming approaches can be used with a novel SMP to vary the mechanical response independent of Tg and polymer chemistry.

Preparation and characterization of shape memory polymer scaffolds via solvent casting/particulate leaching.

PubMed

De Nardo, Luigi; Bertoldi, Serena; Cigada, Alberto; Tanzi, Maria Cristina; Haugen, Håvard Jostein; Farè, Silvia

2012-09-27

Porous Shape Memory Polymers (SMPs) are ideal candidates for the fabrication of defect fillers, able to support tissue regeneration via minimally invasive approaches. In this regard, control of pore size, shape and interconnection is required to achieve adequate nutrient transport and cell ingrowth. Here, we assessed the feasibility of the preparation of SMP porous structures and characterized their chemico-physical properties and in vitro cell response. SMP scaffolds were obtained via solvent casting/particulate leaching of gelatin microspheres, prepared via oil/water emulsion. A solution of commercial polyether-urethane (MM-4520, Mitsubishi Heavy Industries) was cast on compacted microspheres and leached-off after polymer solvent evaporation. The obtained structures were characterized in terms of morphology (SEM and micro-CT), thermo-mechanical properties (DMTA), shape recovery behavior in compression mode, and in vitro cytocompatibility (MG63 Osteoblast-like cell line). The fabrication process enabled easy control of scaffold morphology, pore size, and pore shape by varying the gelatin microsphere morphology. Homogeneous spherical and interconnected pores have been achieved together with the preservation of shape memory ability, with recovery rate up to 90%. Regardless of pore dimensions, MG63 cells were observed adhering and spreading onto the inner surface of the scaffolds obtained for up to seven days of static in vitro tests. A new class of SMP porous structures has been obtained and tested in vitro: according to these preliminary results reported, SMP scaffolds can be further exploited in the design of a new class of implantable devices.

A stress-induced phase transition model for semi-crystallize shape memory polymer

NASA Astrophysics Data System (ADS)

Guo, Xiaogang; Zhou, Bo; Liu, Liwu; Liu, Yanju; Leng, Jinsong

2014-03-01

The developments of constitutive models for shape memory polymer (SMP) have been motivated by its increasing applications. During cooling or heating process, the phase transition which is a continuous time-dependent process happens in semi-crystallize SMP and the various individual phases form at different temperature and in different configuration. Then, the transformation between these phases occurred and shape memory effect will emerge. In addition, stress applied on SMP is an important factor for crystal melting during phase transition. In this theory, an ideal phase transition model considering stress or pre-strain is the key to describe the behaviors of shape memory effect. So a normal distributed model was established in this research to characterize the volume fraction of each phase in SMP during phase transition. Generally, the experiment results are partly backward (in heating process) or forward (in cooling process) compared with the ideal situation considering delay effect during phase transition. So, a correction on the normal distributed model is needed. Furthermore, a nonlinear relationship between stress and phase transition temperature Tg is also taken into account for establishing an accurately normal distributed phase transition model. Finally, the constitutive model which taking the stress as an influence factor on phase transition was also established. Compared with the other expressions, this new-type model possesses less parameter and is more accurate. For the sake of verifying the rationality and accuracy of new phase transition and constitutive model, the comparisons between the simulated and experimental results were carried out.

Application of a bacteriophage lysin to disrupt biofilms formed by the animal pathogen Streptococcus suis.

PubMed

Meng, Xiangpeng; Shi, Yibo; Ji, Wenhui; Meng, Xueling; Zhang, Jing; Wang, Hengan; Lu, Chengping; Sun, Jianhe; Yan, Yaxian

2011-12-01

Bacterial biofilms are crucial to the pathogenesis of many important infections and are difficult to eradicate. Streptococcus suis is an important pathogen of pigs, and here the biofilm-forming ability of 32 strains of this species was determined. Significant biofilms were completely formed by 10 of the strains after 60 h of incubation, with exopolysaccharide production in the biofilm significantly higher than that in the corresponding planktonic cultures. S. suis strain SS2-4 formed a dense biofilm, as revealed by scanning electron microscopy, and in this state exhibited increased resistance to a number of antibiotics (ampicillin, amoxicillin, ciprofloxacin, kanamycin, and rifampin) compared to that of planktonic cultures. A bacteriophage lysin, designated LySMP, was used to attack biofilms alone and in combination with antibiotics and bacteriophage. The results demonstrated that the biofilms formed by S. suis, especially strains SS2-4 and SS2-H, could be dispersed by LySMP and with >80% removal compared to a biofilm reduction by treatment with either antibiotics or bacteriophage alone of less than 20%; in addition to disruption of the biofilm structure, the S. suis cells themselves were inactivated by LySMP. The efficacy of LySMP was not dose dependent, and in combination with antibiotics, it acted synergistically to maximize dispersal of the S. suis biofilm and inactivate the released cells. These data suggest that bacteriophage lysin could form part of an effective strategy to treat S. suis infections and represents a new class of antibiofilm agents.

Formalism for calculation of polymer-solvent-mediated potential

NASA Astrophysics Data System (ADS)

Zhou, Shiqi

2006-07-01

A simple theoretical approach is proposed for calculation of a solvent-mediated potential (SMP) between two colloid particles immersed in a polymer solvent bath in which the polymer is modeled as a chain with intramolecular degrees of freedom. The present recipe is only concerned with the estimation of the density profile of a polymer site around a single solute colloid particle instead of two solute colloid particles separated by a varying distance as done in existing calculational methods for polymer-SMP. Therefore the present recipe is far simpler for numerical implementation than the existing methods. The resultant predictions for the polymer-SMP and polymer solvent-mediated mean force (polymer-SMMF) are in very good agreement with available simulation data. With the present recipe, change tendencies of the contact value and second virial coefficiency of the SMP as a function of size ratio between the colloid particle and polymer site, the number of sites per chain, and the polymer concentration are investigated in detail. The metastable critical polymer concentration as a function of size ratio and the number of sites per chain is also reported for the first time. To yield the numerical solution of the present recipe at less than 1min on a personal computer, a rapid and accurate algorithm for the numerical solution of the classical density functional theory is proposed to supply rapid and accurate estimation of the density profile of the polymer site as an input into the present formalism.

Preparation and characterization of triple shape memory composite foams.

PubMed

Nejad, Hossein Birjandi; Baker, Richard M; Mather, Patrick T

2014-10-28

Foams prepared from shape memory polymers (SMPs) offer the potential for low density materials that can be triggered to deploy with a large volume change, unlike their solid counterparts that do so at near-constant volume. While examples of shape memory foams have been reported in the past, they have been limited to dual SMPs: those polymers featuring one switching transition between an arbitrarily programmed shape and a single permanent shape established by constituent crosslinks. Meanwhile, advances by SMP researchers have led to several approaches toward triple- or multi-shape polymers that feature more than one switching phase and thus a multitude of temporary shapes allowing for a complex sequence of shape deployments. Here, we report the design, preparation, and characterization of a triple shape memory polymeric foam that is open cell in nature and features a two phase, crosslinked SMP with a glass transition temperature of one phase at a temperature lower than a melting transition of the second phase. The soft materials were observed to feature high fidelity, repeatable triple shape behavior, characterized in compression and demonstrated for complex deployment by fixing a combination of foam compression and bending. We further explored the wettability of the foams, revealing composition-dependent behavior favorable for future work in biomedical investigations.

In-Situ Anode Heating and Its Effects on Atomic Constituents in the A-K Gap in Self-Magnetic Pinch (SMP) Experiments

NASA Astrophysics Data System (ADS)

Simpson, Sean; Renk, Timothy; Johnston, Mark; Mazarakis, Mike; Patel, Sonal

2015-11-01

The RITS-6 inductive voltage adder (IVA) accelerator (3.5-8.5 MeV) at Sandia National Laboratories produces high-power (TW) focused electron beams (<3mm diameter) for flash x-ray radiography applications. The Self-Magnetic Pinch (SMP) diode utilizes a hollowed metal cathode to produce a pinched focus onto a high-Z metal anode converter. There is not a clear understanding as to the effects various contaminants such as C, CO, H, H2O, HmCn, O2, and N2, on the anode surface or in the bulk may have on impedance dynamics, beam stability, beam spot size, and reproducibility. Heating pure Ta anodes with and without a thin Al coating have been investigated using temperatures ranging from 400 °C to 1000 °C. Initial experiments indicate a significant reduction in H and C as seen in high-speed spectral analysis of plasmas at the converter and a reduction in the back-streaming proton current. Experiments are ongoing, and latest results will be reported. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Superomedial pedicle reduction mammaplasty: increased resection weight does not increase nipple necrosis.

PubMed

Brownlee, Pamela; Chesire, David; Crandall, Marie; Murray, John

2017-11-01

The superomedial pedicle (SMP) reduction mammaplasty offers several advantages over more traditional operative techniques, such as retained sensation to the nipple areola complex (NAC) and improved preservation of long-term breast shape. However, many surgeons believe that using the SMP can cause an increase in NAC necrosis rates up to 13.1%, especially in large volume reductions. The aims of this paper are to determine the rate of nipple necrosis when performing an SMP reduction mammaplasty at our institution and establish if there is a difference in those rates based on the weight of tissue removed. We then compared our overall rate of nipple necrosis to those found using a systematic review of literature involving other pedicles to determine if this technique is equivalent to more commonly used methods. We performed a retrospective chart review of patients who underwent breast reduction surgery using SMP at a single institution between May 1, 2013, and May 1, 2015. Each breast was counted separately, and the weight of the tissue removed was recorded. Six-mo follow-up data were analyzed using the chi-square analysis to compare rates of NAC necrosis among our patients and historical cohorts. One hundred thirty-five breasts (70 patients) met inclusion criteria. Patients had a mean resection weight per breast of 1016.7 g (±478.3). There was an NAC necrosis rate of 0% in the groups where 1200 g or less of tissue were removed and 2.3% (n = 1) in the group where greater than 1200 g of tissue were removed. We found no statistically significant difference in the rate of NAC necrosis with increased resection weights, (P = 0.32). The overall rate of NAC necrosis for this study was 0.7% per breast, which is equivalent to the rates found during the systematic review of literature. In this study, the SMP breast reduction technique shows a low rate of NAC. We found no statistically significant increase in NAC necrosis rates as the volume of tissue removed increases, and the SMP appears to have an overall rate of NAC necrosis similar to more commonly used pedicles. Although the results of this study may be related to patient selection or surgical technique, we believe that this pedicle preserves the breast's main blood supply so that less tissue ischemia occurs. Copyright © 2017 Elsevier Inc. All rights reserved.

Asymptotic normalization coefficients of resonant and bound states from the phase shifts for α α and α 12C scattering

NASA Astrophysics Data System (ADS)

Orlov, Yu. V.; Irgaziev, B. F.; Nikitina, L. I.

2016-01-01

Recently we have published a paper [Irgaziev, Phys. Rev. C 91, 024002 (2015), 10.1103/PhysRevC.91.024002] where the S -matrix pole method (SMP), which is only valid for resonances, has been developed to derive an explicit expression for the asymptotic normalization coefficient (ANC) and is applied to the low-energy resonant states of nucleon +α and α +12C systems. The SMP results are compared with the effective-range expansion method (EFE) results. In the present paper the SMP and EFE plus the Padé approximation are applied to study the excited 2+ resonant states of 9Be. A contradiction is found between descriptions of the experimental phase shift data for α α scattering and of the 9Be resonant energy for 2+ state. Using the EFE method, we also calculate the ANC for the 9Be ground 0+ state with a very small width. This ANC agrees well with the value calculated using the known analytical expression for narrow resonances. In addition, for the α +12C states 1- and 3- the SMP results are compared with the Padé approximation results. We find that the Padé approximation improves a resonance width description compared with the EFE results. The EFE method is also used to calculate the ANCs for the bound 0mml:mprescripts>O ground 0+ state and for the excited 1- and 2+ levels, which are situated near the threshold of α +12C channel.

Application of a Bacteriophage Lysin To Disrupt Biofilms Formed by the Animal Pathogen Streptococcus suis ▿ †

PubMed Central

Meng, Xiangpeng; Shi, Yibo; Ji, Wenhui; Meng, Xueling; Zhang, Jing; Wang, Hengan; Lu, Chengping; Sun, Jianhe; Yan, Yaxian

2011-01-01

Bacterial biofilms are crucial to the pathogenesis of many important infections and are difficult to eradicate. Streptococcus suis is an important pathogen of pigs, and here the biofilm-forming ability of 32 strains of this species was determined. Significant biofilms were completely formed by 10 of the strains after 60 h of incubation, with exopolysaccharide production in the biofilm significantly higher than that in the corresponding planktonic cultures. S. suis strain SS2-4 formed a dense biofilm, as revealed by scanning electron microscopy, and in this state exhibited increased resistance to a number of antibiotics (ampicillin, amoxicillin, ciprofloxacin, kanamycin, and rifampin) compared to that of planktonic cultures. A bacteriophage lysin, designated LySMP, was used to attack biofilms alone and in combination with antibiotics and bacteriophage. The results demonstrated that the biofilms formed by S. suis, especially strains SS2-4 and SS2-H, could be dispersed by LySMP and with >80% removal compared to a biofilm reduction by treatment with either antibiotics or bacteriophage alone of less than 20%; in addition to disruption of the biofilm structure, the S. suis cells themselves were inactivated by LySMP. The efficacy of LySMP was not dose dependent, and in combination with antibiotics, it acted synergistically to maximize dispersal of the S. suis biofilm and inactivate the released cells. These data suggest that bacteriophage lysin could form part of an effective strategy to treat S. suis infections and represents a new class of antibiofilm agents. PMID:21984241

A triple fouling layers perspective on evaluation of membrane fouling under different scenarios of membrane bioreactor operation

PubMed Central

2014-01-01

One of the main factors affecting membrane fouling in MBRs is operational conditions. In this study the influence of aeration rate, filtration mode, and SRT on hollow fiber membrane fouling was investigated using a triple fouling layers perspective. The sludge microbial population distribution was also determined by PCR method. Through various applied operational scenarios the optimal conditions were: aeration rate of 15 LPM; relaxation mode with 40s duration and 8 min. interval; and SRT of 30 days. The similarity between SMP variations in triple fouling layers with its corresponding hydraulic resistance confirmed the effect of SMP on membrane fouling. Among three fouling fractions, the upper (rinsed) layer found to have the most effect on membrane fouling which implies the critical role of aeration, but as for multilateral effects of aeration, the optimal aeration rate should be determined more precisely. Relaxation interval was more effective than its duration for fouling control. SRT variations in addition to influencing the amount of SMP, also affect on the structure of these material. At longer SRTs (20, 30 days) a greater percentage of SMP could penetrate into the membrane pores and for shorter SRTs they accumulate more on membrane surface. Results showed that there is a very good correlation between total hydraulic resistance (Log R) and protein to carbohydrate ratio at the rinsed layer (P1/C1). Considering significant effects of aeration and SRT conditions on this ratio (according to data), it is very determinative to apply the optimal aeration and SRT conditions. PMID:25002969

Comparison of source apportionments of PM2.5 using three receptor models (CMB, PMF, and SMP) in Seoul, Korea

NASA Astrophysics Data System (ADS)

Heo, J.; Kim, J. Y.; Kim, S. W.

2017-12-01

We compared source apportionments of PM2.5 in Seoul, Korea by three receptor models, Chemical Mass Balance (CMB), Positive Matrix Factorization (PMF), and Solver for Mixture Problem (SMP). The CMB model can estimate source apportionment with suitable source profiles of emissions, but it is difficult to find location-specific source profiles. In contrary, the multivariate receptor model does not need source profiles, but fundamental natural physical constraints (FNPCs) required for aerosol source apportionment are different in PMF and SMP. Ninety-six PM2.5 daily samples collected at Korea Institute of Science and Technology (KIST) in Seoul, Korea from October 2012 to September 2013 were analyzed in this study. The average PM2.5 mass concentration over the study period was 41.5 ± 27.7 mg m-3 and secondary inorganic species and organic matter were the main chemical species occupying about 73.7% - 87.9% of the PM2.5 mass concentration in all seasons. Secondary sulfate (18.0% - 26.1%), secondary nitrate (12.1% - 28.5%), vehicle (2.9% - 32.9%), biomass burning (13.2% - 21.3%) were identified by all three receptor models as the major sources accounting for approximately 76.3%-82.7% of the total PM2.5 and contributions of main sources represented their seasonality. However, three receptor models showed significant differences, especially for vehicle emission due to their measured/estimated source profiles. In this presentation, more detailed comparisons among CMB, PMF and SMP models will be presented focusing on the source profiles and contributions.

3D Printing of a Thermoplastic Shape Memory Polymer using FDM

NASA Astrophysics Data System (ADS)

Zhao, Zhiyang; Weiss, R. A.; Vogt, Bryan

Shape memory polymers (SMPs) change from a temporary shape to its permanent shape when exposed to an external stimulus. The shape memory relies on the presence of two independent networks. 3D printing provides a facile method to fabricate complex shapes with high degrees of customizability. The most common consumer 3D printing technology is fused deposition modeling (FDM), which relies on the extrusion of a thermoplastic filament to build-up the part in a layer by layer fashion. The material choices for FDM are limited, but growing. The generation of an SMP that is printable by FDM could open SMPs to many new potential applications. In this work, we demonstrate printing of thermally activated SMP using FDM. Partially neutralized poly(ethylene-co-r-methacrylic acid) ionomers (Surlyn by Dupont) was extruded into filaments and used as a model thermoplastic shape memory material. The properties of the SMP part can be readily tuned by print parameters, such as infill density or infill direction without changing the base material. We discuss the performance and characteristics of 3D printed shapes compared to their compression molded analogs.

Fabrication of a Bioactive, PCL-based "Self-fitting" Shape Memory Polymer Scaffold.

PubMed

Nail, Lindsay N; Zhang, Dawei; Reinhard, Jessica L; Grunlan, Melissa A

2015-10-23

Tissue engineering has been explored as an alternative strategy for the treatment of critical-sized cranio-maxillofacial (CMF) bone defects. Essential to the success of this approach is a scaffold that is able to conformally fit within an irregular defect while also having the requisite biodegradability, pore interconnectivity and bioactivity. By nature of their shape recovery and fixity properties, shape memory polymer (SMP) scaffolds could achieve defect "self-fitting." In this way, following exposure to warm saline (~60 ºC), the SMP scaffold would become malleable, permitting it to be hand-pressed into an irregular defect. Subsequent cooling (~37 ºC) would return the scaffold to its relatively rigid state within the defect. To meet these requirements, this protocol describes the preparation of SMP scaffolds prepared via the photochemical cure of biodegradable polycaprolactone diacrylate (PCL-DA) using a solvent-casting particulate-leaching (SCPL) method. A fused salt template is utilized to achieve pore interconnectivity. To realize bioactivity, a polydopamine coating is applied to the surface of the scaffold pore walls. Characterization of self-fitting and shape memory behaviors, pore interconnectivity and in vitro bioactivity are also described.

Discovery of SMP-304, a novel benzylpiperidine derivative with serotonin transporter inhibitory activity and 5-HT1A weak partial agonistic activity showing the antidepressant-like effect.

PubMed

Yoshinaga, Hidefumi; Masumoto, Shuji; Koyama, Koji; Kinomura, Naoya; Matsumoto, Yuji; Kato, Taro; Baba, Satoko; Matsumoto, Kenji; Horisawa, Tomoko; Oki, Hitomi; Yabuuchi, Kazuki; Kodo, Toru

2017-01-01

We report the discovery of a novel benzylpiperidine derivative with serotonin transporter (SERT) inhibitory activity and 5-HT 1A receptor weak partial agonistic activity showing the antidepressant-like effect. The 3-methoxyphenyl group and the phenethyl group of compound 1, which has weak SERT binding activity, but potent 5-HT 1A binding activity, were optimized, leading to compound 35 with potent and balanced dual SERT and 5-HT 1A binding activity, but also potent CYP2D6 inhibitory activity. Replacement of the methoxy group in the left part of compound 35 with a larger alkoxy group, such as ethoxy, isopropoxy or methoxy-ethoxy group ameliorated CYP2D6 inhibition, giving SMP-304 as a candidate. SMP-304 with serotonin uptake inhibitory activity and 5-HT 1A weak partial agonistic activity, which could work as a 5-HT 1A antagonist, displayed faster onset of antidepressant-like effect than a representative SSRI paroxetine in an animal model. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigation of soluble microbial products in a full-scale UASB reactor running at low organic loading rate.

PubMed

Zhou, Weili; Wu, Bingtao; She, Qianhong; Chi, Lina; Zhang, Zhenjia

2009-07-01

Investigation on a full-scale UASB treating industrial wastewater at a low organic loading rate (OLR) was conducted. Excellent treatment performance was achieved when treating the evaporator condensate of distillery wastewater at the OLR of less than 1 kg COD/m(3)d. Anaerobic effluent could be discharged without further treatment, which saved energy and running cost considerably. GC-MS analysis showed that the soluble microbial products (SMPs) were decreased to a low level at the low OLR. The main SMP in the anaerobic effluent were long chain carbohydrates and esters, accounting for 55-65% of the total organic matters. Anaerobic SMP was more complex than the aerobic ones. Soluble COD, protein and polysaccharide showed an obvious decrease at the sludge layer from 10 to 15m despite the low MLSS/MLVSS content. Methanogens were found to be predominant in this layer, which indicated that the methanogens might be the main consumers of the SMP in anaerobic reactors. Economic comparison confirmed that the anaerobic treatment at low OLR could be a good option.

Problem Solving Model for Science Learning

NASA Astrophysics Data System (ADS)

Alberida, H.; Lufri; Festiyed; Barlian, E.

2018-04-01

This research aims to develop problem solving model for science learning in junior high school. The learning model was developed using the ADDIE model. An analysis phase includes curriculum analysis, analysis of students of SMP Kota Padang, analysis of SMP science teachers, learning analysis, as well as the literature review. The design phase includes product planning a science-learning problem-solving model, which consists of syntax, reaction principle, social system, support system, instructional impact and support. Implementation of problem-solving model in science learning to improve students' science process skills. The development stage consists of three steps: a) designing a prototype, b) performing a formative evaluation and c) a prototype revision. Implementation stage is done through a limited trial. A limited trial was conducted on 24 and 26 August 2015 in Class VII 2 SMPN 12 Padang. The evaluation phase was conducted in the form of experiments at SMPN 1 Padang, SMPN 12 Padang and SMP National Padang. Based on the development research done, the syntax model problem solving for science learning at junior high school consists of the introduction, observation, initial problems, data collection, data organization, data analysis/generalization, and communicating.

Nanoscale Design of Nano-Sized Particles in Shape-Memory Polymer Nanocomposites Driven by Electricity

PubMed Central

Lu, Haibao; Huang, Wei Min; Liang, Fei; Yu, Kai

2013-01-01

In the last few years, we have witnessed significant progress in developing high performance shape memory polymer (SMP) nanocomposites, in particular, for shape recovery activated by indirect heating in the presence of electricity, magnetism, light, radio frequency, microwave and radiation, etc. In this paper, we critically review recent findings in Joule heating of SMP nanocomposites incorporated with nanosized conductive electromagnetic particles by means of nanoscale control via applying an electro- and/or magnetic field. A few different nanoscale design principles to form one-/two-/three- dimensional conductive networks are discussed. PMID:28788303

AGARD/SMP Review Damage Tolerance for Engine Structures. 4. Reliability and Quality Assurance (Revue AGARD/SMP Tolerance Aux Dommages pour les Composants de Moteurs. 4 Fiabilite et Assurance Qualite)

DTIC Science & Technology

1991-12-01

lequel e110 as fonde n’est en pratique gubre virifi6 par 1’exp~rtence industriolle. Augmenter Is variabilit6 d’un procd diminue rarement lea cofits do...analyses pour sanctionnor los non- -conformitdo. augmentation des retouches et rebuts, Is tout gdndrant une digradation Importante des cycles ot...is a priori dangerous since the principle which It is based on Is scarcely verified in the industrial reality . The increase of the variability of a

Solutions of some problems in applied mathematics using MACSYMA

NASA Technical Reports Server (NTRS)

Punjabi, Alkesh; Lam, Maria

1987-01-01

Various Symbolic Manipulation Programs (SMP) were tested to check the functioning of their commands and suitability under various operating systems. Support systems for SMP were found to be relatively better than the one for MACSYMA. The graphics facilities for MACSYMA do not work as expected under the UNIX operating system. Not all commands for MACSYMA function as described in the manuals. Shape representation is a central issue in computer graphics and computer-aided design. Aside from appearance, there are other application dependent, desirable properties like continuity to certain order, symmetry, axis-independence, and variation-diminishing properties. Several shape representations are studied, which include the Osculatory Method, a Piecewise Cubic Polynomial Method using two different slope estimates, Piecewise Cubic Hermite Form, a method by Harry McLaughlin, and a Piecewise Bezier Method. They are applied to collected physical and chemical data. Relative merits and demerits of these methods are examined. Kinematics of a single link, non-dissipative robot arm is studied using MACSYMA. Lagranian is set-up and Lagrange's equations are derived. From there, Hamiltonian equations of motion are obtained. Equations suggest that bifurcation of solutions can occur, depending upon the value of a single parameter. Using the characteristic function W, the Hamilton-Jacobi equation is derived. It is shown that the H-J equation can be solved in closed form. Analytical solutions to the H-J equation are obtained.

Direct Writing of Three-Dimensional Macroporous Photonic Crystals on Pressure-Responsive Shape Memory Polymers.

PubMed

Fang, Yin; Ni, Yongliang; Leo, Sin-Yen; Wang, Bingchen; Basile, Vito; Taylor, Curtis; Jiang, Peng

2015-10-28

Here we report a single-step direct writing technology for making three-dimensional (3D) macroporous photonic crystal patterns on a new type of pressure-responsive shape memory polymer (SMP). This approach integrates two disparate fields that do not typically intersect: the well-established templating nanofabrication and shape memory materials. Periodic arrays of polymer macropores templated from self-assembled colloidal crystals are squeezed into disordered arrays in an unusual shape memory "cold" programming process. The recovery of the original macroporous photonic crystal lattices can be triggered by direct writing at ambient conditions using both macroscopic and nanoscopic tools, like a pencil or a nanoindenter. Interestingly, this shape memory disorder-order transition is reversible and the photonic crystal patterns can be erased and regenerated hundreds of times, promising the making of reconfigurable/rewritable nanooptical devices. Quantitative insights into the shape memory recovery of collapsed macropores induced by the lateral shear stresses in direct writing are gained through fundamental investigations on important process parameters, including the tip material, the critical pressure and writing speed for triggering the recovery of the deformed macropores, and the minimal feature size that can be directly written on the SMP membranes. Besides straightforward applications in photonic crystal devices, these smart mechanochromic SMPs that are sensitive to various mechanical stresses could render important technological applications ranging from chromogenic stress and impact sensors to rewritable high-density optical data storage media.

Comprehensive analysis of mycolic acid subclass and molecular species composition of Mycobacterium bovis BCG Tokyo 172 cell wall skeleton (SMP-105).

PubMed

Uenishi, Yuko; Fujita, Yukiko; Kusunose, Naoto; Yano, Ikuya; Sunagawa, Makoto

2008-02-01

The mycobacterial cell envelope consists of a characteristic cell wall skeleton (CWS), a mycoloyl arabinogalactan peptidoglycan complex, and related hydrophobic components that contribute to the cell surface properties. Since mycolic acids have recently been reported to play crucial roles in host immune response, detailed molecular characterization of mycolic acid subclasses and sub-subclasses of CWS from Mycobacterium bovis BCG Tokyo 172 (SMP-105) was performed. Mycolic acids were liberated by alkali hydrolysis from SMP-105, and their methyl esters were separated by silica gel TLC into three subclasses: alpha-, methoxy-, and keto-mycolates. Each mycolate subclass was further separated by silver nitrate (AgNO(3))-coated silica gel TLC into sub-subclasses. Molecular weights of individual mycolic acid were determined by MALDI-TOF mass spectrometry. alpha-Mycolates were sub-grouped into cis, cis-dicyclopropanoic (alpha1), and cis-monocyclopropanoic-cis-monoenoic (alpha2) series; methoxy-mycolates were sub-grouped into cis-monocyclopropanoic (m1), trans-monocyclopropanoic (m2), trans-monoenoic (m3), cis-monocyclopropanoic-trans-monoenoic (m4), cis-monoenoic (m5), and cis-monocyclopropanoic-cis-monoenoic (m6) series; and keto-mycolates were sub-grouped into cis-monocyclopropanoic (k1), trans-monocyclopropanoic (k2), trans-monoenoic (k3), cis-monoenoic (k4), and cis-monocyclopropanoic-cis-monoenoic (k5) series. The position of each functional group, including cyclopropane rings and methoxy and keto groups, was determined by analysis of the meromycolates with fast atom bombardment (FAB) mass spectrometry and FAB mass-mass spectrometry, and the cis/trans ratio of cyclopropane rings and double bonds were determined by NMR analysis of methyl mycolates. Mycolic acid subclass and molecular species composition of SMP-105 showed characteristic features including newly-identified cis-monocyclopropanoic-trans-monoenoic mycolic acid (m4).

Rapid non-invasive quality control of semi-finished products for the food industry by direct injection mass spectrometry headspace analysis: the case of milk powder, whey powder and anhydrous milk fat.

PubMed

Makhoul, Salim; Yener, Sine; Khomenko, Iuliia; Capozzi, Vittorio; Cappellin, Luca; Aprea, Eugenio; Scampicchio, Matteo; Gasperi, Flavia; Biasioli, Franco

2016-09-01

In this study, we demonstrated the suitability of direct injection mass spectrometry headspace analysis for rapid non-invasive quality control of semi-finished dairy ingredients, such as skim milk powder (SMP), whole milk powder (WMP), whey powder (WP) and anhydrous milk fat (AMF), which are widely used as ingredients in the food industry. In this work, for the first time, we applied proton transfer reaction-mass spectrometry (PTR-MS) with a time-of-flight (ToF) analyzer for the rapid and non-invasive analysis of volatile compounds in different samples of SMP, WMP, WP and AMF. We selected different dairy ingredients in various concrete situations (e.g. same producer and different expiration times, different producers and same days of storage, different producers) based on their sensory evaluation. PTR-ToF-MS allowed the separation and characterization of different samples based on the volatile organic compound (VOC) profiles. Statistically significant differences in VOC content were generally coherent with differences in sensory evaluation, particularly for SMP, WMP and WP. The good separation of SMP samples from WMP samples suggested the possible application of PTR-ToF-MS to detect possible cases of adulteration of dairy ingredients for the food industry. Our findings demonstrate the efficient and rapid differentiation of dairy ingredients on the basis of the released VOCs via PTR-ToF-MS analysis and suggest this method as a versatile tool (1) for the facilitation/optimization of the selection of dairy ingredients in the food industry and (2) and for the prompt innovation in the production of dairy ingredients. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Magnetic performance change of multi-main-phase Nd-Ce-Fe-B magnets by diffusing (Nd, Pr)H x

NASA Astrophysics Data System (ADS)

Ma, Tianyu; Zhang, Wenying; Peng, Baixing; Liu, Yongsheng; Chen, Yongjie; Wang, Xinhua; Yan, Mi

2018-02-01

The grain boundary diffusion process (GBDP) is effective to enhance coercivity of the single-main-phase (SMP) RE2Fe14B (rare earth (RE)) magnets through forming magnetic hardening shells surrounding the hard grain cores. Here, the GBDP was applied to the multi-main-phase (MMP) (Nd, Pr)22.3Ce8.24FebalM1.0B1.0 (wt.%) magnets prepared by sintering the mixture of Ce-free and Ce-containing 2:14:1 powders, which have shown superior magnetic properties, especially coercivity, to the SMP ones at the same average composition. The remanence of the (Nd, Pr)H x diffused magnets increases gradually with the increase of diffusion temperature from 480 to 880 °C, the coercivity, however, slightly decreases. The highest (BH)max of 350.1 kJ m-3 is achieved when diffusing at 680 °C, which is 9.2% higher than 320.7 kJ m-3 for the as-prepared magnet. The remanence increment is due to the diffusion of Nd/Pr into the 2:14:1 phase grains, enlarging the intrinsic saturation magnetic polarization. The slight coercivity reduction is due to the gradual homogenization of RE distribution within the 2:14:1 grains of the undiffused parts, i.e. approaching the ‘close to equilibrium (or SMP)’ state, which offsets the positive contributions from the enrichment of Nd/Pr in the Ce-rich 2:14:1 phase and the formation of continuous RE-rich intergranular phase. These findings suggest that the GBDP effect on coercivity of the MMP Nd-Ce-Fe-B magnets is distinctly different from the SMP ones, and that the chemical heterogeneity should be carefully controlled to improve the magnetic properties of such high cost-performance permanent magnets.

Study of the second magnetization peak and the pinning behaviour in Ba(Fe0.935Co0.065)2As2 pnictide superconductor

NASA Astrophysics Data System (ADS)

Sundar, Shyam; Mosqueira, J.; Alvarenga, A. D.; Sóñora, D.; Sefat, A. S.; Salem-Sugui, S., Jr.

2017-12-01

Isothermal magnetic field dependence of magnetization and magnetic relaxation measurements were performed for the H\\parallel {{c}} axis on a single crystal of Ba(Fe0.935 Co0.065)2As2 pnictide superconductor having T c = 21.7 K. The second magnetization peak (SMP) for each isothermal M(H) was observed in a wide temperature range from T c to the lowest temperature of measurement (2 K). The magnetic field dependence of relaxation rate R(H), showed a peak (H spt) between H on (onset of SMP in M(H)) and H p (peak field of SMP in M(H)), which is likely to be related to a vortex-lattice structural phase transition, as suggested in the literature for a similar sample. In addition, the magnetic relaxation measured for magnetic fields near H spt showed some noise, which might be the signature of the structural phase transition of the vortex lattice. Analysis of the magnetic relaxation data using Maley’s criterion and the collective pinning theory suggested that the SMP in the sample was due to the collective (elastic) to plastic creep crossover, which was also accompanied by a rhombic to square vortex lattice phase transition. Analysis of the pinning force density suggested a single dominating pinning mechanism in the sample, which did not showing the usual δ {l} and δ {T}{{c}} nature of pinning. The critical current density (J c), estimated using the Bean critical state model, was found to be 5 × 105 A cm- 2 at 2 K in the zero magnetic field limit. Surprisingly, the maximum of the pinning force density was not responsible for the maximum value of the critical current density in the sample.

Enteric neuroplasticity in seawater-adapted European eel (Anguilla anguilla).

PubMed

Sorteni, C; Clavenzani, P; De Giorgio, R; Portnoy, O; Sirri, R; Mordenti, O; Di Biase, A; Parmeggiani, A; Menconi, V; Chiocchetti, R

2014-02-01

European eels live most of their lives in freshwater until spawning migration to the Sargasso Sea. During seawater adaptation, eels modify their physiology, and their digestive system adapts to the new environment, drinking salt water to compensate for the continuous water loss. In that period, eels stop feeding until spawning. Thus, the eel represents a unique model to understand the adaptive changes of the enteric nervous system (ENS) to modified salinity and starvation. To this purpose, we assessed and compared the enteric neuronal density in the cranial portion of the intestine of freshwater eels (control), lagoon eels captured in brackish water before their migration to the Sargasso Sea (T0), and starved seawater eels hormonally induced to sexual maturity (T18; 18 weeks of starvation and treatment with standardized carp pituitary extract). Furthermore, we analyzed the modification of intestinal neuronal density of hormonally untreated eels during prolonged starvation (10 weeks) in seawater and freshwater. The density of myenteric (MP) and submucosal plexus (SMP) HuC/D-immunoreactive (Hu-IR) neurons was assessed in wholemount preparations and cryosections. The number of MP and SMP HuC/D-IR neurons progressively increased from the freshwater to the salty water habitat (control > T0 > T18; P < 0.05). Compared with freshwater eels, the number of MP and SMP HuC/D-IR neurons significantly increased (P < 0.05) in the intestine of starved untreated salt water eels. In conclusion, high salinity evokes enteric neuroplasticity as indicated by the increasing number of HuC/D-IR MP and SMP neurons, a mechanism likely contributing to maintaining the body homeostasis of this fish in extreme conditions. © 2013 Anatomical Society.

Enteric neuroplasticity in seawater-adapted European eel (Anguilla anguilla)

PubMed Central

Sorteni, C; Clavenzani, P; De Giorgio, R; Portnoy, O; Sirri, R; Mordenti, O; Di Biase, A; Parmeggiani, A; Menconi, V; Chiocchetti, R

2014-01-01

European eels live most of their lives in freshwater until spawning migration to the Sargasso Sea. During seawater adaptation, eels modify their physiology, and their digestive system adapts to the new environment, drinking salt water to compensate for the continuous water loss. In that period, eels stop feeding until spawning. Thus, the eel represents a unique model to understand the adaptive changes of the enteric nervous system (ENS) to modified salinity and starvation. To this purpose, we assessed and compared the enteric neuronal density in the cranial portion of the intestine of freshwater eels (control), lagoon eels captured in brackish water before their migration to the Sargasso Sea (T0), and starved seawater eels hormonally induced to sexual maturity (T18; 18 weeks of starvation and treatment with standardized carp pituitary extract). Furthermore, we analyzed the modification of intestinal neuronal density of hormonally untreated eels during prolonged starvation (10 weeks) in seawater and freshwater. The density of myenteric (MP) and submucosal plexus (SMP) HuC/D-immunoreactive (Hu-IR) neurons was assessed in wholemount preparations and cryosections. The number of MP and SMP HuC/D-IR neurons progressively increased from the freshwater to the salty water habitat (control > T0 > T18; P < 0.05). Compared with freshwater eels, the number of MP and SMP HuC/D-IR neurons significantly increased (P < 0.05) in the intestine of starved untreated salt water eels. In conclusion, high salinity evokes enteric neuroplasticity as indicated by the increasing number of HuC/D-IR MP and SMP neurons, a mechanism likely contributing to maintaining the body homeostasis of this fish in extreme conditions. PMID:24433383

An Unconventional Diacylglycerol Kinase That Regulates Phospholipid Synthesis and Nuclear Membrane Growth*♦

PubMed Central

Han, Gil-Soo; O'Hara, Laura; Carman, George M.; Siniossoglou, Symeon

2008-01-01

Changes in nuclear size and shape during the cell cycle or during development require coordinated nuclear membrane remodeling, but the underlying molecular events are largely unknown. We have shown previously that the activity of the conserved phosphatidate phosphatase Pah1p/Smp2p regulates nuclear structure in yeast by controlling phospholipid synthesis and membrane biogenesis at the nuclear envelope. Two screens for novel regulators of phosphatidate led to the identification of DGK1. We show that Dgk1p is a unique diacylglycerol kinase that uses CTP, instead of ATP, to generate phosphatidate. DGK1 counteracts the activity of PAH1 at the nuclear envelope by controlling phosphatidate levels. Overexpression of DGK1 causes the appearance of phosphatidate-enriched membranes around the nucleus and leads to its expansion, without proliferating the cortical endoplasmic reticulum membrane. Mutations that decrease phosphatidate levels decrease nuclear membrane growth in pah1Δ cells. We propose that phosphatidate metabolism is a critical factor determining nuclear structure by regulating nuclear membrane biogenesis. PMID:18458075

Shape-Memory Polymers for Biomedical Applications

NASA Astrophysics Data System (ADS)

Yakacki, Christopher M.; Gall, Ken

Shape-memory polymers (SMPs) are a class of mechanically functional "smart" materials that have generated substantial interest for biomedical applications. SMPs offer the ability to promote minimally invasive surgery, provide structural support, exert stabilizing forces, elute therapeutic agents, and biodegrade. This review focuses on several areas of biomedicine including vascular, orthopedic, and neuronal applications with respect to the progress and potential for SMPs to improve the standard of treatment in these areas. Fundamental studies on proposed biomedical SMP systems are discussed with regards to biodegradability, tailorability, sterilization, and biocompatibility. Lastly, a proposed research and development pathway for SMP-based biomedical devices is proposed based on trends in the recent literature.

Thermally driven microfluidic pumping via reversible shape memory polymers

NASA Astrophysics Data System (ADS)

Robertson, J. M.; Rodriguez, R. X.; Holmes, L. R., Jr.; Mather, P. T.; Wetzel, E. D.

2016-08-01

The need exists for autonomous microfluidic pumping systems that utilize environmental cues to transport fluid within a network of channels for such purposes as heat distribution, self-healing, or optical reconfiguration. Here, we report on reversible thermally driven microfluidic pumping enabled by two-way shape memory polymers. After developing a suitable shape memory polymer (SMP) through variation in the crosslink density, thin and flexible microfluidic devices were constructed by lamination of plastic films with channels defined by laser-cutting of double-sided adhesive film. SMP blisters integrated into the devices provide thermally driven pumping, while opposing elastic blisters are used to generate backpressure for reversible operation. Thermal cycling of the device was found to drive reversible fluid flow: upon heating to 60 °C, the SMP rapidly contracted to fill the surface channels with a transparent fluid, and upon cooling to 8 °C the flow reversed and the channel re-filled with black ink. Combined with a metallized backing layer, this device results in refection of incident light at high temperatures and absorption of light (at the portions covered with channels) at low temperatures. We discuss power-free, autonomous applications ranging from thermal regulation of structures to thermal indication via color change.

Biodegradable near-infrared-photoresponsive shape memory implants based on black phosphorus nanofillers.

PubMed

Xie, Hanhan; Shao, Jundong; Ma, Yufei; Wang, Jiahong; Huang, Hao; Yang, Na; Wang, Huaiyu; Ruan, Changshun; Luo, Yanfeng; Wang, Qu-Quan; Chu, Paul K; Yu, Xue-Feng

2018-05-01

In this paper, we propose a new shape memory polymer (SMP) composite with excellent near-infrared (NIR)-photoresponsive shape memory performance and biodegradability. The composite is fabricated by using piperazine-based polyurethane (PU) as thermo-responsive SMP incorporated with black-phosphorus (BP) sheets as NIR photothermal nanofillers. Under 808 nm light irradiation, the incorporated BP sheets with concentration of only 0.08 wt% enable rapid temperature increase over the glass temperature of PU and trigger the shape change of the composite with shape recovery rate of ∼100%. The in vitro and in vivo toxicity examinations demonstrate the good biocompatibility of the PU/BP composite, and it degrades naturally into non-toxic carbon dioxide and water from PU and non-toxic phosphate from BP. By implanting PU/BP columns into back subcutis and vagina of mice, they exhibit excellent shape memory activity to change their shape quickly under moderate 808 nm light irradiaiton. Such SMP composite enable the development of intelligent implantable devices, which can be easily controlled by the remote NIR light and degrade gradually after performing the designed functions in the body. Copyright © 2018 Elsevier Ltd. All rights reserved.

Physics of systems containing neutron stars

NASA Technical Reports Server (NTRS)

Ruderman, Malvin

1996-01-01

This grant dealt with several topics related to the dynamics of systems containing a compact object. Most of the research dealt with systems containing Neutron Stars (NS's), but a Black Hole (BH) or a White Dwarf (WD) in situations relevant to NS systems were also addressed. Among the systems were isolated regular pulsars, Millisecond Pulsars (MSP's) that are either Single (SMP's) or in a binary (BMP's), Low Mass X-Ray Binaries (LMXB's) and Cataclysmic Variables (CV's). Also dealt with was one aspect of NS structure, namely NS superfluidity. A large fraction of the research dealt with irradiation-driven winds from companions which turned out to be of importance in the evolution of LMXB's and MSP's, be they SMP's or BMP's. While their role during LMXB evolution (i.e. during the accretion phase) is not yet clear, they may play an important role in turning BMP's into SMP's and also in bringing about the formation of planets around MSP's. Work was concentrated on the following four problems: The Windy Pulsar B197+20 and its Evolution; Wind 'Echoes' in Tight Binaries; Post Nova X-ray Emission in CV's; and Dynamics of Pinned Superfluids in Neutron Stars.

Viability and growth promotion of starter and probiotic bacteria in yogurt supplemented with whey protein hydrolysate during refrigerated storage.

PubMed

Dąbrowska, Anna; Babij, Konrad; Szołtysik, Marek; Chrzanowska, Józefa

2017-11-22

The effect of whey protein hydrolysate (WPH) addition on growth of standard yoghurt cultures and Bifidobacterium adolescentis during co-fermentation and its viability during storage at 4ºC in yoghurts has been evaluated. WPH was obtained with the use of serine protease from Y. lipolytica yeast. Stirred probiotic yoghurts were prepared by using whole milk standardized to 16% of dry matter with the addition of either whey protein concentrate, skim milk powder (SMP), WPH-SMP (ratio 1:1), WPH. The hydrolysate increased the yoghurt culture counts at the initial stage of fermentation and significantly inhibited the decrease in population viability throughout the storage at 4ºC in comparison to the control. The post-fermentation acidification was also retarded by the addition of WPH. The hydrolysate did not increase the Bifidobacterium adolescentis counts at the initial stage. However, the WPH significantly improved its viability. After 21 days of storage, in the yogurts supplemented with WPH, the population of these bacteria oscillated around 3.04 log10 CFU/g, while in samples where SMP or whey protein concentrate was used, the bacteria were no longer detected.

Innovative Soil Management Practices (SMP) Assessment in Europe and China

NASA Astrophysics Data System (ADS)

Barão, Lúcia

2017-04-01

The growing world population poses a major challenge to global agricultural food and feed production through the pressure to increase agricultural outputs either by increasing the land area dedicated to agriculture or by productivity increases. Whether in developed or developing regions, agricultural intensification based on conventional approaches has resulted in severe environmental impacts and innovative soil management practices are needed to halter ongoing soil degradation and promote sustainable land management capable to produce more from less. The iSQAPER project - Interactive Soil Quality Assessment in Europe and China for Agricultural Productivity and Environmental Resilience - aims to develop a Soil Quality app (SQAPP) linking soil and agricultural management practices to soil quality indicators. This easy friendly tool will provide a direct and convenient way to advise farmers and other suitable actors in this area, regarding the best management practices to be adopted in very specific and local conditions. In this particular study from iSQAPER, we aimed to identify the most promising innovative soil management practices (SMP) currently used and its geographical distribution along different pedo-climatic regions in Europe (Boreal, Atlantic, Mediterranean Temperate, Mediterranean Semi-Arid, Southern Sub-Continental and Northern Sub-Continental) and China (Middle Temperate, Warm temperate and Central Asia Tropical). So far we have identified 155 farms where innovative SMP's are used, distributed along 4 study site regions located in China (Qiyang, Suining, Zhifanggou and Gongzhuling) and 10 study site regions located in Europe (The Netherlands, France, Portugal, Spain, Greece, Slovenia, Hungary, Romania, Poland and Estonia) and covering the major pedo-climatic regions. From this identification we concluded that the most used innovative SMP's in the study site regions in Europe are Manuring & Composting (14%), Min-till (14%), Crop rotation (12%), Leguminous crops (10%), Change of Land Use Practices (10%), Residue Maintenance (8%), no-till (8%) and permanent soil cover (6%). In China, innovative SMP's are Manuring & Composting (24%), Residue maintenance/Mulching (16%), No-till (11%), Irrigation management (9%), Change of Land Use Practices (7%), Cover crops (7%), Crop rotation (7%) and Green manure (7%). The implementation of such practices reflects the general concern of farmers regarding Erosion and Soil Organic Matter (SOM) decline problems in their soils, while other threats such as Compaction or Water Holding Capacity are still not addressed explicitly in these regions. Keywords: Agriculture, Soil threats, Management Practices, Sustainability.

A shape memory foam composite with enhanced fluid uptake and bactericidal properties as a hemostatic agent.

PubMed

Landsman, T L; Touchet, T; Hasan, S M; Smith, C; Russell, B; Rivera, J; Maitland, D J; Cosgriff-Hernandez, E

2017-01-01

Uncontrolled hemorrhage accounts for more than 30% of trauma deaths worldwide. Current hemostatic devices focus primarily on time to hemostasis, but prevention of bacterial infection is also critical for improving survival rates. In this study, we sought to improve on current devices used for hemorrhage control by combining the large volume-filling capabilities and rapid clotting of shape memory polymer (SMP) foams with the swelling capacity of hydrogels. In addition, a hydrogel composition was selected that readily complexes with elemental iodine to impart bactericidal properties to the device. The focus of this work was to verify that the advantages of each respective material (SMP foam and hydrogel) are retained when combined in a composite device. The iodine-doped hydrogel demonstrated an 80% reduction in bacteria viability when cultured with a high bioburden of Staphylococcus aureus. Hydrogel coating of the SMP foam increased fluid uptake by 19× over the uncoated SMP foam. The composite device retained the shape memory behavior of the foam with more than 15× volume expansion after being submerged in 37°C water for 15 min. Finally, the expansion force of the composite was tested to assess potential tissue damage within the wound during device expansion. Expansion forces did not exceed 0.6N, making tissue damage during device expansion unlikely, even when the expanded device diameter is substantially larger than the target wound site. Overall, the enhanced fluid uptake and bactericidal properties of the shape memory foam composite indicate its strong potential as a hemostatic agent to treat non-compressible wounds. No hemostatic device currently used in civilian and combat trauma situations satisfies all the desired criteria for an optimal hemostatic wound dressing. The research presented here sought to improve on current devices by combining the large volume-filling capabilities and rapid clotting of shape memory polymer (SMP) foams with the swelling capacity of hydrogels. In addition, a hydrogel composition was selected that readily complexes with elemental iodine to impart bactericidal properties to the device. The focus of this work was to verify that the advantages of each respective material are retained when combined into a composite device. This research opens the door to generating novel composites with a focus on both hemostasis, as well as wound healing and microbial prevention. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Transcriptome Analysis of Skin from SMP30/GNL Knockout Mice Reveals the Effect of Ascorbic Acid Deficiency on Skin and Hair.

PubMed

Wakame, Koji; Komatsu, Ken-Ichi; Nakata, Akifumi; Sato, Keisuke; Takaguri, Akira; Masutomi, Hirofumi; Nagashima, Takayuki; Uchiyama, Hironobu

2017-01-01

Senescence marker protein-30/gluconolactonase knockout mice (SMP-30/GNL-KO) are a very useful model for clarifying the involvement of vitamin C (VC) in aging-related diseases. In this study, the effects of VC deficiency on skin and hair growth were investigated using SMP-30/GNL-KO mice by RNA sequencing. SMP-30/GNL-KO mice were given water containing 1.5 g/l VC until up to 8 weeks after birth to maintain a VC concentration in their organs and plasma equivalent to that in wild-type mice. The mice were then divided into two groups: a VC(+) group, where VC was administered, and a VC(-) group, where VC was not administered. Skin samples were collected at 4 and 8 weeks after the treatment. RNA was extracted from each skin sample, followed by cDNA synthesis and RNA-seq. In addition, hair growth was compared between the VC(-) and VC(+) groups after shaving. Skin samples were collected from the shaved area for histological examination by hematoxylin & eosin (HE) staining. RNA-seq revealed that there were 1,736 (FDR<0.001) differentially expressed genes in the VC(-) and VC(+) groups. From the functional analysis of the differentially expressed genes in the VC(-) and VC(+) groups, predicted functionalities including cell death and cytotoxicity increased in the VC(+) group. Furthermore, it was predicted that the difference in hair growth between the VC(-) and VC(+) groups was caused by the expression of genes including keratin-related genes and the Sonic hedgehog gene. It was confirmed that hair growth was significantly promoted; hair growth from hair papilla cells was also confirmed by HE staining of the shaved backs of SMP-30/GNL-KO mice in the VC(+) group. RNA-seq of the skin from VC-deficient mice showed the effects of VC deficiency on the expression of genes involved in cell growth and the hair cycle. Visual inspection suggested that changes in the expression of the genes are involved in delaying hair growth in the VC(-) group. Further research on the relationship among VC deficiency, the hair cycle, and skin cell growth may contribute to research on hair restoration and skin aging. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

The tmRNA website

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudson, Corey M.; Williams, Kelly P.

We report that the transfer-messenger RNA (tmRNA) and its partner protein SmpB act together in resolving problems arising when translating bacterial ribosomes reach the end of mRNA with no stop codon. Their genes have been found in nearly all bacterial genomes and in some organelles. The tmRNA Website serves tmRNA sequences, alignments and feature annotations, and has recently moved to http: //bioinformatics.sandia.gov/tmrna/. New features include software used to find the sequences, an update raising the number of unique tmRNA sequences from 492 to 1716, and a database of SmpB sequences which are served along with the tmRNA sequence from themore » same organism.« less

A Kirigami shape memory polymer honeycomb concept for deployment

NASA Astrophysics Data System (ADS)

Neville, Robin M.; Chen, Jianguo; Guo, Xiaogang; Zhang, Fenghua; Wang, Wenxin; Dobah, Yousef; Scarpa, Fabrizio; Leng, Jinsong; Peng, Hua-Xin

2017-05-01

We present a shape memory polymer (SMP) honeycomb with tuneable and shape morphing mechanical characteristics. Kirigami (Origami with cutting allowed) techniques have been used to design and manufacture the honeycomb. The cellular structure described in this work has styrene SMP hinges that create the shape change and the deployment actuation. To create a large volumetric deployment, the Kirigami open honeycomb configuration has been designed by setting an initial three-dimensional re-entrant auxetic (negative Poisson’s ratio) configuration, while the final honeycomb shape assume a convex (positive Poisson’s ratio) layout. A model was developed to predict the shape change of the structure, and compared to experimental results from a demonstrator honeycomb deployment test.

The tmRNA website

DOE PAGES

Hudson, Corey M.; Williams, Kelly P.

2014-11-05

We report that the transfer-messenger RNA (tmRNA) and its partner protein SmpB act together in resolving problems arising when translating bacterial ribosomes reach the end of mRNA with no stop codon. Their genes have been found in nearly all bacterial genomes and in some organelles. The tmRNA Website serves tmRNA sequences, alignments and feature annotations, and has recently moved to http: //bioinformatics.sandia.gov/tmrna/. New features include software used to find the sequences, an update raising the number of unique tmRNA sequences from 492 to 1716, and a database of SmpB sequences which are served along with the tmRNA sequence from themore » same organism.« less

In vitro and in vivo Evaluation of a Shape Memory Polymer Foam-over-Wire Embolization Device Delivered in Saccular Aneurysm Models

PubMed Central

Boyle, Anthony J.; Landsman, Todd L.; Wierzbicki, Mark A.; Nash, Landon D.; Hwang, Wonjun; Miller, Matthew W.; Tuzun, Egemen; Hasan, Sayyeda M.; Maitland, Duncan J.

2015-01-01

Current endovascular therapies for intracranial saccular aneurysms result in high recurrence rates due to poor tissue healing, coil compaction, and aneurysm growth. We propose treatment of saccular aneurysms using shape memory polymer (SMP) foam to improve clinical outcomes. SMP foam-over-wire (FOW) embolization devices were delivered to in vitro and in vivo porcine saccular aneurysm models to evaluate device efficacy, aneurysm occlusion, and acute clotting. FOW devices demonstrated effective delivery and stable implantation in vitro. In vivo porcine aneurysms were successfully occluded using FOW devices with theoretical volume occlusion values greater than 72% and rapid, stable thrombus formation. PMID:26227115

The SMP mobilizes a bright idea: a CSM cinema on wheels.

PubMed

1985-01-01

The Bangladesh Family Planning Social Marketing Project (SMP) provides 1 of the best examples of the use of the mass media to promote social marketing. Using a fleet of 7 vans and 1 motor launch, the SMP brings films about family planning to more than a million rural couples a month living in isolated villages. Each film unit has two 16 mm projectors, a generator, a screen and speaker system and is operated by a projectionist and an assistant. 1 mobile unit gives about 25 shows a month at a cost of $75US per show, or less than 2 cents per person. The message reels and advertising spots were produced in Bangladesh, and the musical numbers are taken from local feature films. Every 3-4 months, the vans switch message and musical films, but all units keep separate copies of the advertising spots for Raja and Panther condoms and Maya and Ovacon pills. The motivational films were developed through extensive research, and they address basic social issues. During the show, various promotional items are sold, including calendars with family planning messages, plastic bags, key rings, and contraceptives. According to Robert Ciszewski, executive director of Population Services International, these mobile films are making a profound social change in Bangladesh.

Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets

NASA Astrophysics Data System (ADS)

Mailen, Russell W.; Dickey, Michael D.; Genzer, Jan; Zikry, Mohammed

2017-11-01

Shape memory polymer (SMP) sheets patterned with black ink hinges change shape in response to external stimuli, such as absorbed thermal energy from an infrared (IR) light. The geometry of these hinges, including size, orientation, and location, and the applied thermal loads significantly influence the final folded shape of the sheet, but these variables have not been fully investigated. We perform a systematic study on SMP sheets to fundamentally understand the effects of single and double hinge geometries, hinge orientation and spacing, initial temperature, heat flux intensity, and pattern width on the folding behavior. We have developed thermo-viscoelastic finite element models to characterize and quantify the stresses, strains, and temperatures as they relate to SMP shape changes. Our predictions indicate that hinge orientation can be used to reduce the total bending angle, which is the angle traversed by the folding face of the sheet. Two parallel hinges increase the total bending angle, and heat conduction between the hinges affects the transient folding response. IR intensity and initial temperatures can also influence the transient folding behavior. These results can provide guidelines to optimize the transient folding response and the three-dimensional folded structure obtained from self-folding polymer origami sheets that can be applied for myriad applications.

Removal of soluble microbial products as the precursors of disinfection by-products in drinking water supplies.

PubMed

Liu, Jin-Lin; Li, Xiao-Yan

2015-01-01

Water pollution worsens the problem of disinfection by-products (DBPs) in drinking water supply. Biodegradation of wastewater organics produces soluble microbial products (SMPs), which can be important DBP precursors. In this laboratory study, a number of enhanced water treatment methods for DBP control, including enhanced coagulation, ozonation, and activated carbon adsorption, were evaluated for their effectiveness in treating SMP-containing water for the DBP reduction purpose. The results show that enhanced coagulation with alum could remove SMPs only marginally and decrease the DBP formation potential (DBPFP) of the water by less than 20%. Although ozone could cause destruction of SMPs in water, the overall DBPFP of the water did not decrease but increased after ozonation. In contrast, adsorption by granular activated carbon could remove the SMP organics from water by more than 60% and reduce the DBPFP by more than 70%. It is apparent that enhanced coagulation and ozonation are not suitable for the removal of SMPs as DBP precursors from polluted water, although enhanced coagulation has been commonly used to reduce the DBP formation caused by natural organic matter. In comparison, activated carbon adsorption is shown as a more effective means to remove the SMP content from water and hence to control the wastewater-derived DBP problem in water supply.

Understanding Graphics on a Scalable Latching Assistive Haptic Display Using a Shape Memory Polymer Membrane.

PubMed

Besse, Nadine; Rosset, Samuel; Zarate, Juan Jose; Ferrari, Elisabetta; Brayda, Luca; Shea, Herbert

2018-01-01

We present a fully latching and scalable 4 × 4 haptic display with 4 mm pitch, 5 s refresh time, 400 mN holding force, and 650 μm displacement per taxel. The display serves to convey dynamic graphical information to blind and visually impaired users. Combining significant holding force with high taxel density and large amplitude motion in a very compact overall form factor was made possible by exploiting the reversible, fast, hundred-fold change in the stiffness of a thin shape memory polymer (SMP) membrane when heated above its glass transition temperature. Local heating is produced using an addressable array of 3 mm in diameter stretchable microheaters patterned on the SMP. Each taxel is selectively and independently actuated by synchronizing the local Joule heating with a single pressure supply. Switching off the heating locks each taxel into its position (up or down), enabling holding any array configuration with zero power consumption. A 3D-printed pin array is mounted over the SMP membrane, providing the user with a smooth and room temperature array of movable pins to explore by touch. Perception tests were carried out with 24 blind users resulting in 70 percent correct pattern recognition over a 12-word tactile dictionary.

Postharvest behaviour of two Sardinian apple varieties following immersion in heated sodium bicarbonate solution.

PubMed

Venditti, T; Molinu, M G; Dore, A; Agabbio, M; D'Hallewin, G

2010-01-01

'Miali' and 'Caddina' are apple varieties of Sardinian germplasm, mainly produced under sustainable conditions. Fruit is rarely subjected to cold storage and postharvest losses are generally high. In order to prolong the marketing period and contain postharvest decay of these local varieties, we investigated on their storage behaviour and on the efficacy of combined alternative postharvest treatments. Pre-climateric fruit was harvested and immersed for 0 (control), 15, 30, 45 or 60 sec. in water at 20, 50, 55 or 60 degrees C with or without 2% (W/V) NaHCO3 (SBC). Then, fruit was stored for 4 months at 5 degrees C and 90% RH followed by a 6 day simulated marketing period (SMP) at 10 degrees C and 75% RH. Decay was monitored at the end of storage and after the SMP, while appearance and physiological disorders were evaluated after SMP. During storage 56 and 62% of the untreated 'Caddina' and 'Miali' apples rotted, respectively. During the SMP, an additional 3% of 'Caddina' and 5% of 'Miali' was lost. Among the treatments the best decay control, for both varieties, was attained when fruit was immersed in the SBC solution at 55 degrees C for 60 sec. Compared to control, decay was reduced by 91 and 95% for 'Caddina' and 'Miali', respectively. This combination induced some rind damage, mainly on 'Caddina' fruit. Superficial scald was evident on 'Caddina' and scored as medium while, cold storage induced a significant deposition of epicuticular wax in 'Miali' fruit, affecting significantly fruit appearance. A significant reduction of decay was also achieved when fruit was immersed at 60 degrees C for 30 or 45 sec., attaining for 'Caddina' a reduction of 82 and 88% of decay, respectively. Other combinations were lesser effective or produced rind damages and most decay was caused by Penicillium expansum.

Process optimization for enhancing production of cis-4-hydroxy-L-proline by engineered Escherichia coli.

PubMed

Chen, Kequan; Pang, Yang; Zhang, Bowen; Feng, Jiao; Xu, Sheng; Wang, Xin; Ouyang, Pingkai

2017-11-22

Understanding the bioprocess limitations is critical for the efficient design of biocatalysts to facilitate process feasibility and improve process economics. In this study, a proline hydroxylation process with recombinant Escherichia coli expressing L-proline cis-4-hydroxylase (SmP4H) was investigated. The factors that influencing the metabolism of microbial hosts and process economics were focused on for the optimization of cis-4-hydroxy-L-proline (CHOP) production. In recombinant E. coli, SmP4H synthesis limitation was observed. After the optimization of expression system, CHOP production was improved in accordance with the enhanced SmP4H synthesis. Furthermore, the effects of the regulation of proline uptake and metabolism on whole-cell catalytic activity were investigated. The improved CHOP production by repressing putA gene responsible for L-proline degradation or overexpressing L-proline transporter putP on CHOP production suggested the important role of substrate uptake and metabolism on the whole-cell biocatalyst efficiency. Through genetically modifying these factors, the biocatalyst activity was significantly improved, and CHOP production was increased by twofold. Meanwhile, to further improve process economics, a two-strain coupling whole-cell system was established to supply co-substrate (α-ketoglutarate, α-KG) with a cheaper chemical L-glutamate as a starting material, and 13.5 g/L of CHOP was successfully produced. In this study, SmP4H expression, and L-proline uptake and degradation, were uncovered as the hurdles for microbial production of CHOP. Accordingly, the whole-cell biocatalysts were metabolically engineered for enhancing CHOP production. Meanwhile, a two-strain biotransformation system for CHOP biosynthesis was developed aiming at supplying α-KG more economically. Our work provided valuable insights into the design of recombinant microorganism to improve the biotransformation efficiency that catalyzed by Fe(II)/α-KG-dependent dioxygenase.

Message Passing vs. Shared Address Space on a Cluster of SMPs

NASA Technical Reports Server (NTRS)

Shan, Hongzhang; Singh, Jaswinder Pal; Oliker, Leonid; Biswas, Rupak

2000-01-01

The convergence of scalable computer architectures using clusters of PCs (or PC-SMPs) with commodity networking has become an attractive platform for high end scientific computing. Currently, message-passing and shared address space (SAS) are the two leading programming paradigms for these systems. Message-passing has been standardized with MPI, and is the most common and mature programming approach. However message-passing code development can be extremely difficult, especially for irregular structured computations. SAS offers substantial ease of programming, but may suffer from performance limitations due to poor spatial locality, and high protocol overhead. In this paper, we compare the performance of and programming effort, required for six applications under both programming models on a 32 CPU PC-SMP cluster. Our application suite consists of codes that typically do not exhibit high efficiency under shared memory programming. due to their high communication to computation ratios and complex communication patterns. Results indicate that SAS can achieve about half the parallel efficiency of MPI for most of our applications: however, on certain classes of problems SAS performance is competitive with MPI. We also present new algorithms for improving the PC cluster performance of MPI collective operations.

Contribution of the backstreaming ions to the self-magnetic pinch (SMP) diode current

NASA Astrophysics Data System (ADS)

Mazarakis, Michael G.; Bennett, Nichelle; Cuneo, Michael E.; Fournier, Sean D.; Johnston, Mark D.; Kiefer, Mark L.; Leckbee, Joshua J.; Nielsen, Dan S.; Oliver, Bryan V.; Sceiford, Matthew E.; Simpson, Sean C.; Renk, Timothy J.; Ruiz, Carlos L.; Webb, Timothy J.; Ziska, Derek; Droemer, Darryl W.; Gignac, Raymond E.; Obregon, Robert J.; Wilkins, Frank L.; Welch, Dale R.

2018-04-01

The results presented here were obtained with a self-magnetic pinch (SMP) diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The RITS driver together with the SMP diode has produced x-ray spots of the order of 1 mm in diameter and doses adequate for the radiographic imaging of high area density objects. Although, through the years, a number of different types of radiographic electron diodes have been utilized with SABER, HERMES III and RITS accelerators, the SMP diode appears to be the most successful and simplest diode for the radiographic investigation of various objects. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target and second to try to evaluate the energy of those ions and hence the Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the A-K gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (˜1 cm) and the diode region very hostile. The accelerating voltage quoted in the literature is from estimates based on the measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus, it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high-Z metals in order to produce copious and energetic flash x-rays. It was established experimentally that the back-streaming ion currents are a strong function of the anode materials and their stage of cleanness. We have measured the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatment: namely, heating at very high temperatures with DC and pulsed current, with RF plasma cleaning, and with both plasma cleaning and heating. We have also evaluated the A-K gap voltage by energy filtering technique. Experimental results in comparison with LSP simulations are presented.

Effects of soluble milk protein or casein supplementation on muscle fatigue following resistance training program: a randomized, double-blind, and placebo-controlled study

PubMed Central

2014-01-01

Background The effects of protein supplementation on muscle thickness, strength and fatigue seem largely dependent on its composition. The current study compared the effects of soluble milk protein, micellar casein, and a placebo on strength and fatigue during and after a resistance training program. Methods Sixty-eight physically active men participated in this randomized controlled trial and underwent 10 weeks of lower-body resistance training. Participants were randomly assigned to the Placebo (PLA), Soluble Milk Protein (SMP, with fast digestion rate) or Micellar Casein (MC, with slow digestion rate) group. During the 10-week training period, participants were instructed to take 30 g of the placebo or protein twice a day, or three times on training days. Tests were performed on quadriceps muscles at inclusion (PRE), after 4 weeks (MID) and after 10 weeks (POST) of training. They included muscle endurance (maximum number of repetitions during leg extensions using 70% of the individual maximal load), fatigue (decrease in muscle power after the endurance test), strength, power and muscle thickness. Results Muscle fatigue was significantly lower (P < 0.05) in the SMP group at MID and POST (-326.8 ± 114.1 W and -296.6 ± 130.1 W, respectively) as compared with PLA (-439.2 ± 153.9 W and -479.2 ± 138.1 W, respectively) and MC (-415.1 ± 165.1 W and -413.7 ± 139.4 W, respectively). Increases in maximal muscle power, strength, endurance and thickness were not statistically different between groups. Conclusions The present study demonstrated that protein composition has a large influence on muscular performance after prolonged resistance training. More specifically, as compared with placebo or micellar casein, soluble milk protein (fast digestible) appeared to significantly reduce muscle fatigue induced by intense resistance exercise. PMID:25057266

Effects of soluble milk protein or casein supplementation on muscle fatigue following resistance training program: a randomized, double-blind, and placebo-controlled study.

PubMed

Babault, Nicolas; Deley, Gaëlle; Le Ruyet, Pascale; Morgan, François; Allaert, François André

2014-01-01

The effects of protein supplementation on muscle thickness, strength and fatigue seem largely dependent on its composition. The current study compared the effects of soluble milk protein, micellar casein, and a placebo on strength and fatigue during and after a resistance training program. Sixty-eight physically active men participated in this randomized controlled trial and underwent 10 weeks of lower-body resistance training. Participants were randomly assigned to the Placebo (PLA), Soluble Milk Protein (SMP, with fast digestion rate) or Micellar Casein (MC, with slow digestion rate) group. During the 10-week training period, participants were instructed to take 30 g of the placebo or protein twice a day, or three times on training days. Tests were performed on quadriceps muscles at inclusion (PRE), after 4 weeks (MID) and after 10 weeks (POST) of training. They included muscle endurance (maximum number of repetitions during leg extensions using 70% of the individual maximal load), fatigue (decrease in muscle power after the endurance test), strength, power and muscle thickness. Muscle fatigue was significantly lower (P < 0.05) in the SMP group at MID and POST (-326.8 ± 114.1 W and -296.6 ± 130.1 W, respectively) as compared with PLA (-439.2 ± 153.9 W and -479.2 ± 138.1 W, respectively) and MC (-415.1 ± 165.1 W and -413.7 ± 139.4 W, respectively). Increases in maximal muscle power, strength, endurance and thickness were not statistically different between groups. The present study demonstrated that protein composition has a large influence on muscular performance after prolonged resistance training. More specifically, as compared with placebo or micellar casein, soluble milk protein (fast digestible) appeared to significantly reduce muscle fatigue induced by intense resistance exercise.

The ASC Sequoia Programming Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seager, M

2008-08-06

In the late 1980's and early 1990's, Lawrence Livermore National Laboratory was deeply engrossed in determining the next generation programming model for the Integrated Design Codes (IDC) beyond vectorization for the Cray 1s series of computers. The vector model, developed in mid 1970's first for the CDC 7600 and later extended from stack based vector operation to memory to memory operations for the Cray 1s, lasted approximately 20 years (See Slide 5). The Cray vector era was deemed an extremely long lived era as it allowed vector codes to be developed over time (the Cray 1s were faster in scalarmore » mode than the CDC 7600) with vector unit utilization increasing incrementally over time. The other attributes of the Cray vector era at LLNL were that we developed, supported and maintained the Operating System (LTSS and later NLTSS), communications protocols (LINCS), Compilers (Civic Fortran77 and Model), operating system tools (e.g., batch system, job control scripting, loaders, debuggers, editors, graphics utilities, you name it) and math and highly machine optimized libraries (e.g., SLATEC, and STACKLIB). Although LTSS was adopted by Cray for early system generations, they later developed COS and UNICOS operating systems and environment on their own. In the late 1970s and early 1980s two trends appeared that made the Cray vector programming model (described above including both the hardware and system software aspects) seem potentially dated and slated for major revision. These trends were the appearance of low cost CMOS microprocessors and their attendant, departmental and mini-computers and later workstations and personal computers. With the wide spread adoption of Unix in the early 1980s, it appeared that LLNL (and the other DOE Labs) would be left out of the mainstream of computing without a rapid transition to these 'Killer Micros' and modern OS and tools environments. The other interesting advance in the period is that systems were being developed with multiple 'cores' in them and called Symmetric Multi-Processor or Shared Memory Processor (SMP) systems. The parallel revolution had begun. The Laboratory started a small 'parallel processing project' in 1983 to study the new technology and its application to scientific computing with four people: Tim Axelrod, Pete Eltgroth, Paul Dubois and Mark Seager. Two years later, Eugene Brooks joined the team. This team focused on Unix and 'killer micro' SMPs. Indeed, Eugene Brooks was credited with coming up with the 'Killer Micro' term. After several generations of SMP platforms (e.g., Sequent Balance 8000 with 8 33MHz MC32032s, Allian FX8 with 8 MC68020 and FPGA based Vector Units and finally the BB&N Butterfly with 128 cores), it became apparent to us that the killer micro revolution would indeed take over Crays and that we definitely needed a new programming and systems model. The model developed by Mark Seager and Dale Nielsen focused on both the system aspects (Slide 3) and the code development aspects (Slide 4). Although now succinctly captured in two attached slides, at the time there was tremendous ferment in the research community as to what parallel programming model would emerge, dominate and survive. In addition, we wanted a model that would provide portability between platforms of a single generation but also longevity over multiple--and hopefully--many generations. Only after we developed the 'Livermore Model' and worked it out in considerable detail did it become obvious that what we came up with was the right approach. In a nutshell, the applications programming model of the Livermore Model posited that SMP parallelism would ultimately not scale indefinitely and one would have to bite the bullet and implement MPI parallelism within the Integrated Design Code (IDC). We also had a major emphasis on doing everything in a completely standards based, portable methodology with POSIX/Unix as the target environment. We decided against specialized libraries like STACKLIB for performance, but kept as many general purpose, portable math libraries as were needed by the codes. Third, we assumed that the SMPs in clusters would evolve in time to become more powerful, feature rich and, in particular, offer more cores. Thus, we focused on OpenMP, and POSIX PThreads for programming SMP parallelism. These code porting efforts were lead by Dale Nielsen, A-Division code group leader, and Randy Christensen, B-Division code group leader. Most of the porting effort revolved removing 'Crayisms' in the codes: artifacts of LTSS/NLTSS, Civic compiler extensions beyond Fortran77, IO libraries and dealing with new code control languages (we switched to Perl and later to Python). Adding MPI to the codes was initially problematic and error prone because the programmers used MPI directly and sprinkled the calls throughout the code.« less

Grant Administration Manual for Title III Coordinators.

ERIC Educational Resources Information Center

Mathis, Emily Duncan; Ashmore, Frances W.

Guidelines for coordinators of programs under Title III of the Higher Education Act of 1965 are presented, based on a national survey of Title III program coordinators. The responsibilities of the coordinator and information on administering the Strengthening Developing Institutions Program (SDIP) grant are covered. The program can either be a…

Optics Program Modified for Multithreaded Parallel Computing

NASA Technical Reports Server (NTRS)

Lou, John; Bedding, Dave; Basinger, Scott

2006-01-01

A powerful high-performance computer program for simulating and analyzing adaptive and controlled optical systems has been developed by modifying the serial version of the Modeling and Analysis for Controlled Optical Systems (MACOS) program to impart capabilities for multithreaded parallel processing on computing systems ranging from supercomputers down to Symmetric Multiprocessing (SMP) personal computers. The modifications included the incorporation of OpenMP, a portable and widely supported application interface software, that can be used to explicitly add multithreaded parallelism to an application program under a shared-memory programming model. OpenMP was applied to parallelize ray-tracing calculations, one of the major computing components in MACOS. Multithreading is also used in the diffraction propagation of light in MACOS based on pthreads [POSIX Thread, (where "POSIX" signifies a portable operating system for UNIX)]. In tests of the parallelized version of MACOS, the speedup in ray-tracing calculations was found to be linear, or proportional to the number of processors, while the speedup in diffraction calculations ranged from 50 to 60 percent, depending on the type and number of processors. The parallelized version of MACOS is portable, and, to the user, its interface is basically the same as that of the original serial version of MACOS.

Resin-dentin interface of Scotchbond Multi-Purpose dentin adhesive.

PubMed

Griffiths, B M; Watson, T F

1995-08-01

To evaluate the interface between dentin, Scotchbond Multi-Purpose (SMP), and resin composite (Z100) using confocal fluorescence microscopy. Novel techniques were employed to view and record at video rate the application of the SMP primer and adhesive onto the dentin surface. The subsurface morphology of the dentin/restorative interface was also studied. To facilitate this study, the components of the adhesive system were labeled with fluorescent dyes. In an ideal situation, the primer and adhesive penetrated the dentin tubules, a distinct hybrid zone was formed and a thin layer of adhesive was observed at the interfacial region. However, the primed dentin surface was sensitive to disruption by the adhesive application brush during its placement, so that parts of the primer layer could be incorporated into the adhesive. This disruption could only be seen using confocal microscopy and a fluorescence labeling technique. Delamination of the primer layer was not observed when the adhesive film was thinned by air blowing. The application of an air stream to the cavity surface increased the penetration of the primer and adhesive along the dentin tubules, but also increased the thickness of the adhesive within irregularities on the cavity surface and at the cavity line angle. The cause of the problems in the handling properties of SMP may be the difference in viscosity between the two components (primer and adhesive) at the adhesive interface.

Effect of valsartan on cardiac senescence and apoptosis in a rat model of cardiotoxicity.

PubMed

Sakr, Hussein F; Abbas, Amr M; Elsamanoudy, Ayman Z

2016-06-01

The clinical application of doxorubicin is limited by its cardiotoxicity. The present study investigated the effect of valsartan on doxorubicin-induced cardiotoxicity in rats. Rats were divided into 6 groups: control, control + valsartan (10 mg/kg, for 14 days, orally), doxorubicin-treated (2.5 mg/kg, 3 times/week for 2 weeks, intraperitoneally), valsartan then doxorubicin, valsartan + doxorubicin, and doxorubicin then valsartan. ECG, isolated heart, lipid peroxidation (thiobaribituric acid reactive substances (TBARS)), total antioxidant capacity (TAC), and Bax, Bcl-2, and senescence marker protein 30 (SMP30) gene expression were measured in cardiac tissue. Blood samples were collected to measure lactate dehydrogenase (LDH) and creatine kinase MB (CK-MB). Doxorubicin significantly increased LDH, CK-MB, TBARS, heart rate (HR), Bax gene expression, and -dP/dtmax and decreased TAC, Bcl-2 and SMP30 gene expression, left ventricular developed pressure (LVDP), and +dP/dtmax. Also, doxorubicin lengthened ST, QT, and QTc intervals. Concurrent or post- but not pre-treatment of doxorubicin-treated rats with valsartan reduced LDH, CK-MB, TBARS, HR, Bax gene expression, -dP/dtmax, and ST, QT, and QTc intervals and increased TAC, Bcl-2 and SMP30 gene expression, LVDP, and +dP/dtmax. Therefore, we conclude that concurrent or post- but not pre-treatment of doxorubicin-induced rats with valsartan attenuated doxorubicin-induced cardiotoxicity through inhibiting oxidative stress, apoptosis, and senescence.

Self-Deploying Trusses Containing Shape-Memory Polymers

NASA Technical Reports Server (NTRS)

Schueler, Robert M.

2008-01-01

Composite truss structures are being developed that can be compacted for stowage and later deploy themselves to full size and shape. In the target applications, these smart structures will precisely self-deploy and support a large, lightweight space-based antenna. Self-deploying trusses offer a simple, light, and affordable alternative to articulated mechanisms or inflatable structures. The trusses may also be useful in such terrestrial applications as variable-geometry aircraft components or shelters that can be compacted, transported, and deployed quickly in hostile environments. The truss technology uses high-performance shape-memory-polymer (SMP) thermoset resin reinforced with fibers to form a helical composite structure. At normal operating temperatures, the truss material has the structural properties of a conventional composite. This enables truss designs with required torsion, bending, and compression stiffness. However, when heated to its designed glass transition temperature (Tg), the SMP matrix acquires the flexibility of an elastomer. In this state, the truss can be compressed telescopically to a configuration encompassing a fraction of its original volume. When cooled below Tg, the SMP reverts to a rigid state and holds the truss in the stowed configuration without external constraint. Heating the materials above Tg activates truss deployment as the composite material releases strain energy, driving the truss to its original memorized configuration without the need for further actuation. Laboratory prototype trusses have demonstrated repeatable self-deployment cycles following linear compaction exceeding an 11:1 ratio (see figure).

Shape memory alloy/shape memory polymer tools

DOEpatents

Seward, Kirk P.; Krulevitch, Peter A.

2005-03-29

Micro-electromechanical tools for minimally invasive techniques including microsurgery. These tools utilize composite shape memory alloy (SMA), shape memory polymer (SMP) and combinations of SMA and SMP to produce catheter distal tips, actuators, etc., which are bistable. Applications for these structures include: 1) a method for reversible fine positioning of a catheter tip, 2) a method for reversible fine positioning of tools or therapeutic catheters by a guide catheter, 3) a method for bending articulation through the body's vasculature, 4) methods for controlled stent delivery, deployment, and repositioning, and 5) catheters with variable modulus, with vibration mode, with inchworm capability, and with articulated tips. These actuators and catheter tips are bistable and are opportune for in vivo usage because the materials are biocompatible and convenient for intravascular use as well as other minimal by invasive techniques.

40 CFR 123.3 - Coordination with other programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Coordination with other programs. 123.3 Section 123.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.3 Coordination with other programs. Issuance of State permits...

40 CFR 123.3 - Coordination with other programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Coordination with other programs. 123.3 Section 123.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.3 Coordination with other programs. Issuance of State permits...

40 CFR 123.3 - Coordination with other programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Coordination with other programs. 123.3 Section 123.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.3 Coordination with other programs. Issuance of State permits...

Care coordination for children with special needs in Medicaid: lessons from Medicare.

PubMed

Stewart, Kate A; Bradley, Katharine W V; Zickafoose, Joseph S; Hildrich, Rachel; Ireys, Henry T; Brown, Randall S

2018-04-01

To provide actionable recommendations for improving care coordination programs for children with special healthcare needs (CSHCN) in Medicaid managed care.  Literature review and interviews with stakeholders and policy experts to adapt lessons learned from Medicare care coordination programs for CSHCN in Medicaid managed care. We reviewed syntheses of research on Medicare care coordination programs to identify lessons learned from successful programs. We adapted findings from Medicare to CSHCN in Medicaid based on an environmental scan and discussions with experts. The scan focused on Medicaid financing and eligibility for care coordination and how these intersect with Medicaid managed care. The expert discussions included pediatricians, Medicaid policy experts, Medicaid medical directors, and a former managed care executive, all experienced in care coordination for CSHCN. We found 6 elements that are consistently associated with improved outcomes from Medicare care coordination programs and relevant to CSHCN in Medicaid: 1) identifying and targeting high-risk patients, 2) clearly articulating what outcomes programs are likely to improve, 3) encouraging active engagement between care coordinators and primary care providers, 4) requiring some in-person contact between care coordinators and patients, 5) facilitating information sharing among providers, and 6) supplementing care coordinators' expertise with that of other clinical experts. States and Medicaid managed care organizations have many options for designing effective care coordination programs for CSHCN. Their choices should account for the diversity of conditions among CSHCN, families' capacity to coordinate care, and social determinants of health.

49 CFR 613.300 - Coordination of Federal and federally assisted programs and projects.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Coordination of Federal and federally assisted programs and projects. 613.300 Section 613.300 Transportation Other Regulations Relating to Transportation... Coordination of Federal and Federally Assisted Programs and Projects § 613.300 Coordination of Federal and...

The TULIP superfamily of eukaryotic lipid-binding proteins as a mediator of lipid sensing and transport.

PubMed

Alva, Vikram; Lupas, Andrei N

2016-08-01

The tubular lipid-binding (TULIP) superfamily has emerged in recent years as a major mediator of lipid sensing and transport in eukaryotes. It currently encompasses three protein families, SMP-like, BPI-like, and Takeout-like, which share a common fold. This fold consists of a long helix wrapped in a highly curved anti-parallel β-sheet, enclosing a central, lipophilic cavity. The SMP-like proteins, which include subunits of the ERMES complex and the extended synaptotagmins (E-Syts), appear to be mainly located at membrane contacts sites (MCSs) between organelles, mediating inter-organelle lipid exchange. The BPI-like proteins, which include the bactericidal/permeability-increasing protein (BPI), the LPS (lipopolysaccharide)-binding protein (LBP), the cholesteryl ester transfer protein (CETP), and the phospholipid transfer protein (PLTP), are either involved in innate immunity against bacteria through their ability to sense lipopolysaccharides, as is the case for BPI and LBP, or in lipid exchange between lipoprotein particles, as is the case for CETP and PLTP. The Takeout-like proteins, which are comprised of insect juvenile hormone-binding proteins and arthropod allergens, transport, where known, lipid hormones to target tissues during insect development. In all cases, the activity of these proteins is underpinned by their ability to bind large, hydrophobic ligands in their central cavity and segregate them away from the aqueous environment. Furthermore, where they are involved in lipid exchange, recent structural studies have highlighted their ability to establish lipophilic, tubular channels, either between organelles in the case of SMP domains or between lipoprotein particles in the case of CETP. Here, we review the current knowledge on the structure, versatile functions, and evolution of the TULIP superfamily. We propose a deep evolutionary split in this superfamily, predating the Last Eukaryotic Common Ancestor, between the SMP-like proteins, which act on lipids endogenous to the cell, and the BPI-like proteins (including the Takeout-like proteins of arthropods), which act on exogenous lipids. This article is part of a Special Issue entitled: The cellular lipid landscape edited by Tim P. Levine and Anant K. Menon. Copyright © 2016 Elsevier B.V. All rights reserved.

Hydrogen-rich pure water prevents cigarette smoke-induced pulmonary emphysema in SMP30 knockout mice.

PubMed

Suzuki, Yohei; Sato, Tadashi; Sugimoto, Masataka; Baskoro, Hario; Karasutani, Keiko; Mitsui, Aki; Nurwidya, Fariz; Arano, Naoko; Kodama, Yuzo; Hirano, Shin-Ichi; Ishigami, Akihito; Seyama, Kuniaki; Takahashi, Kazuhisa

2017-10-07

Chronic obstructive pulmonary disease (COPD) is predominantly a cigarette smoke (CS)-triggered disease with features of chronic systemic inflammation. Oxidants derived from CS can induce DNA damage and stress-induced premature cellular senescence in the respiratory system, which play significant roles in COPD. Therefore, antioxidants should provide benefits for the treatment of COPD; however, their therapeutic potential remains limited owing to the complexity of this disease. Recently, molecular hydrogen (H 2 ) has been reported as a preventive and therapeutic antioxidant. Molecular H 2 can selectively reduce hydroxyl radical accumulation with no known side effects, showing potential applications in managing oxidative stress, inflammation, apoptosis, and lipid metabolism. However, there have been no reports on the efficacy of molecular H 2 in COPD patients. In the present study, we used a mouse model of COPD to investigate whether CS-induced histological damage in the lungs could be attenuated by administration of molecular H 2 . We administered H 2 -rich pure water to senescence marker protein 30 knockout (SMP30-KO) mice exposed to CS for 8 weeks. Administration of H 2 -rich water attenuated the CS-induced lung damage in the SMP30-KO mice and reduced the mean linear intercept and destructive index of the lungs. Moreover, H 2 -rich water significantly restored the static lung compliance in the CS-exposed mice compared with that in the CS-exposed H 2 -untreated mice. Moreover, treatment with H 2 -rich water decreased the levels of oxidative DNA damage markers such as phosphorylated histone H2AX and 8-hydroxy-2'-deoxyguanosine, and senescence markers such as cyclin-dependent kinase inhibitor 2A, cyclin-dependent kinase inhibitor 1, and β-galactosidase in the CS-exposed mice. These results demonstrated that H 2 -rich pure water attenuated CS-induced emphysema in SMP30-KO mice by reducing CS-induced oxidative DNA damage and premature cell senescence in the lungs. Our study suggests that administration of molecular H 2 may be a novel preventive and therapeutic strategy for COPD. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of fortification with various types of milk proteins on the rheological properties and permeability of nonfat set yogurt.

PubMed

Peng, Y; Serra, M; Horne, D S; Lucey, J A

2009-01-01

Yogurt base was prepared from reconstituted skim milk powder (SMP) with 2.5% protein and fortified with additional 1% protein (wt/wt) from 4 different milk protein sources: SMP, milk protein isolate (MPI), micellar casein (MC), and sodium caseinate (NaCN). Heat-treated yogurt mixes were fermented at 40 degrees C with a commercial yogurt culture until pH 4.6. During fermentation pH was monitored, and storage modulus (G') and loss tangent (LT) were measured using dynamic oscillatory rheology. Yield stress (sigma(yield)) and permeability of gels were analyzed at pH 4.6. Addition of NaCN significantly reduced buffering capacity of yogurt mix by apparently solubilizing part of the indigenous colloidal calcium phosphate (CCP) in reconstituted SMP. Use of different types of milk protein did not affect pH development except for MC, which had the slowest fermentation due to its very high buffering. NaCN-fortified yogurt had the highest G' and sigma(yield) values at pH 4.6, as well as maximum LT values. Partial removal of CCP by NaCN before fermentation may have increased rearrangements in yogurt gel. Soluble casein molecules in NaCN-fortified milks may have helped to increase G' and LT values of yogurt gels by increasing the number of cross-links between strands. Use of MC increased the CCP content but resulted in low G' and sigma(yield) at pH 4.6, high LT and high permeability. The G' value at pH 4.6 of yogurts increased in the order: SMP = MC < MPI < NaCN. Type of milk protein used to standardize the protein content had a significant impact on physical properties of yogurt. Practical Application: In yogurt processing, it is common to add additional milk solids to improve viscosity and textural attributes. There are many different types of milk protein powders that could potentially be used for fortification purposes. This study suggests that the type of milk protein used for fortification impacts yogurt properties and sodium caseinate gave the best textural results.

7 CFR 227.35 - Responsibilities of State coordinator.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 227.35 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM State Coordinator... implementation of the State Plan, (f) Coordination of the Program with the Child Nutrition Programs at the State...

7 CFR 227.35 - Responsibilities of State coordinator.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 227.35 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM State Coordinator... implementation of the State Plan, (f) Coordination of the Program with the Child Nutrition Programs at the State...

7 CFR 227.35 - Responsibilities of State coordinator.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 227.35 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM State Coordinator... implementation of the State Plan, (f) Coordination of the Program with the Child Nutrition Programs at the State...

7 CFR 227.35 - Responsibilities of State coordinator.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 227.35 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM State Coordinator... implementation of the State Plan, (f) Coordination of the Program with the Child Nutrition Programs at the State...

7 CFR 227.35 - Responsibilities of State coordinator.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 227.35 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM State Coordinator... implementation of the State Plan, (f) Coordination of the Program with the Child Nutrition Programs at the State...

A Survey of Campus Coordinators of Undergraduate Research Programs

ERIC Educational Resources Information Center

Hensley, Merinda Kaye; Shreeves, Sarah L.; Davis-Kahl, Stephanie

2015-01-01

Interest in supporting undergraduate research programs continues to grow within academic librarianship. This article presents how undergraduate research program coordinators perceive and value library support of their programs. Undergraduate research coordinators from a variety of institutions were surveyed on which elements of libraries and…

The effect of implementing a care coordination program on team dynamics and the patient experience.

PubMed

Di Capua, Paul; Clarke, Robin; Tseng, Chi-Hong; Wilhalme, Holly; Sednew, Renee; McDonald, Kathryn M; Skootsky, Samuel A; Wenger, Neil

2017-08-01

Care coordination programs are frequently implemented in the redesign of primary care systems, focused on improving patient outcomes and reducing utilization. However, redesign can be disruptive, affect patient experiences, and undermine elements in the patient-centered medical home, such as team-based care. Case-controlled study with difference-in-differences (DID) and cross-sectional analyses. The phased implementation of a care coordination program permitted evaluation of a natural experiment to compare measures of patient experience and teamwork in practices with and without care coordinators. Patient experience scores were compared before and after the introduction of care coordinators, using DID analyses. Cross-sectional data were used to compare teamwork, based on the relational coordination survey, and physician-perceived barriers to coordinated care between clinics with and without care coordinators. We evaluated survey responses from 459 staff and physicians and 13,441 patients in 26 primary care practices. Practices with care coordinators did not have significantly different relational coordination scores compared with practices without care coordinators, and physicians in these practices did not report reduced barriers to coordinated care. After implementation of the program, patients in practices with care coordinators reported a more positive experience with staff over time (DID, 2.6 percentage points; P = .0009). A flexible program that incorporates care coordinators into the existing care team was minimally disruptive to existing team dynamics, and the embedded care coordinators were associated with a small increase in patient ratings that reflected a more positive experience with staff.

In Vitro Antimicrobial Activity of Razupenem (SMP-601, PTZ601) against Anaerobic Bacteria▿

PubMed Central

Tran, Chau Minh; Tanaka, Kaori; Yamagishi, Yuka; Goto, Takatsugu; Mikamo, Hiroshige; Watanabe, Kunitomo

2011-01-01

We evaluated the in vitro antianaerobic activity of razupenem (SMP-601, PTZ601), a new parenterally administered carbapenem, against 70 reference strains and 323 clinical isolates. Razupenem exhibited broad-spectrum activity against anaerobes, inhibiting most of the reference strains when used at a concentration of ≤1 μg/ml. Furthermore, it exhibited strong activity, comparable to those of other carbapenems (meropenem and doripenem), against clinically isolated non-fragilis Bacteroides spp. (MIC90s of 2 μg/ml), with MIC90 values of 0.06, 0.03, and 0.5 μg/ml against Prevotella spp., Porphyromonas spp., and Fusobacterium spp., respectively. Clinical isolates of anaerobic Gram-positive cocci, Eggerthella spp., and Clostridium spp. were highly susceptible to razupenem (MIC90s, 0.03 to 1 μg/ml). PMID:21343447

Recent advances in the science and engineering of organic light-emitting diodes (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kippelen, Bernard; Gaj, Michael P.; Zhang, Xiaoqing; Choi, Sangmoo; Fuentes-Hernandez, Canek; Zhang, Yadong; Barlow, Stephen; Marder, Seth R.; Voit, Walter E.; Wei, Andrew

2016-09-01

In this talk, we will discuss recent advances in the science and engineering of organic light-emitting diodes (OLEDs). First, we will focus on materials in which light emission involves the process of thermally activated delayed fluorescence (TADF). In these materials, triplet excited states can convert into optically emissive singlet excited states by reverse intersystem crossing, allowing for nearly 100% internal quantum efficiency. This process can be used to design a new class of materials that are all organic, offering a lower cost alternative to conventional electrophosphorescent materials that contain heavy and expensive elements such as Pt and Ir. We will discuss molecular design strategies and present examples of materials that can be used as emitters or hosts in the emissive layer. In a second part of this talk, we will review recent progress in fabricating OLEDs on shape memory polymer substrates (SMPs). SMPs are mechanically active, smart materials that can exhibit a significant drop in modulus once an external stimulus such as temperature is applied. In their rubbery state upon heating, the SMP can be easily deformed by external stresses into a temporary geometric configuration that can be retained even after the stress is removed by cooling the SMP to below the glass transition temperature. Reheating the SMP causes strain relaxation within the polymer network and induces recovery of its original shape. We will discuss how these unique mechanical properties can also be extended to a new class of OLEDs.

Physico-chemical, microstructural and rheological properties of camel-milk yogurt as enhanced by microbial transglutaminase.

PubMed

Abou-Soliman, Nagwa H I; Sakr, Sally S; Awad, Sameh

2017-05-01

Camel milk produces watery texture when it is processed to yogurt. Despite the extensive studies on microbial transglutaminase (MTGase) in dairy research, the effect of this enzyme on the properties of yogurt made from camel milk has not been studied. This study aims to investigate the impact of MTGase with and without bovine skimmed milk powder (SMP), whey protein concentrate (WPC),or β-lactoglobulin (β-lg) on physico-chemical, rheological, microstructural, and sensory properties of camel-milk yogurt during 15 days of storage period. MTGase treatment markedly reduced the fermentation time of unfortified and SMP-fortified camel milk. The fortification of camel milk without MTGase failed to give set-type yogurt. The treatment of unfortified milk with MTGase enormously improved the viscosity and the body of yogurt samples. Fortification of MTGase-treated milk impacted positively on the viscosity, the water holding capacity, and the density of the protein matrix in the gel microstructure, which were influenced by the type of dairy ingredients. All MTGase-treated yogurts differed from each other in hardness and adhesiveness values. Electrophoresis results showed that the susceptibility of the individual milk proteins to MTGase varied, and there were differences among the treatments toward the enzyme. SMP-fortified yogurt was the most accepted product. Generally, the addition of MTGase preparation at a concentration of 0.4%, simultaneously with starter culture, to fortified camel milk was considered an effective tool to solve the challenges of producing set-type yogurt from this milk.

Nigella sativa Oil Enhances the Spatial Working Memory Performance of Rats on a Radial Arm Maze

PubMed Central

Sahak, Mohamad Khairul Azali; Mohamed, Abdul Majid; Hashim, Noor Hashida; Hasan Adli, Durriyyah Sharifah

2013-01-01

Nigella sativa, an established historical and religion-based remedy for a wide range of health problems, is a herbal medicine known to have antioxidant and neuroprotective effects. This present study investigated the effect of Nigella sativa oil (NSO) administration on the spatial memory performance (SMP) of male adult rats using eight-arm radial arm maze (RAM). Twelve Sprague Dawley rats (7–9 weeks old) were force-fed daily with 6.0 μL/100 g body weight of Nigella sativa oil (NSO group; n = 6) or 0.1 mL/100 g body weight of corn oil (control) (CO group; n = 6) for a period of 20 consecutive weeks. For each weekly evaluation of SMP, one day food-deprived rats were tested by allowing each of them 3 minutes to explore the RAM for food as their rewards. Similar to the control group, the SMP of the treated group was not hindered, as indicated by the establishment of the reference and working memory components of the spatial memory. The results demonstrated that lesser mean numbers of error were observed for the NSO-treated group in both parameters as compared to the CO-treated group. NSO could therefore enhance the learning and memory abilities of the rats; there was a significant decrease in the overall mean number of working memory error (WME) in the NSO-treated group. PMID:24454487

Responses of soluble microbial products and extracellular polymeric substances to the presence of toxic 2,6-dichlorophenol in aerobic granular sludge system.

PubMed

Li, Kai; Wei, Dong; Yan, Tao; Du, Bin; Wei, Qin

2016-12-01

The objective of this study was to evaluate the responses of soluble microbial products (SMP) and extracellular polymeric substances (EPS) to the presence of toxic 2,6-dichlorophenol (2,6-DCP) in aerobic granular sludge (AGS) system. Batch experiment showed that NH 4 + -N removal efficiency significantly decreased from 99.6% to 47.2% in the toxic 2,6-DCP of 20 mg/L. Moreover, the inhibition degrees of 2,6-DCP on (SOUR) H , [Formula: see text] and [Formula: see text] were 7.8%, 32.1% and 9.5%, respectively. The main components of SMP, including protein (PN) and polysaccharide (PS) increased from 2.3 ± 0.74 and 16.8 ± 0.12 mg/L to 66.4 ± 0.56 and 18.0 ± 0.19 mg/L in the presence of 2,6-DCP. Three-dimensional excitation-emission matrix (3D-EEM) spectroscopy identified tryptophan PN-like, humic acid-like and fulvic acid-like substances in the control SMP, and their fluorescence intensities increased after exposure to 2,6-DCP. Synchronous fluorescence spectra suggested that the fluorescence quenching between EPS and 2,6-DCP was a static quenching process. The obtained results could provide insightful information on the responses of microbial products to AGS in the presence of toxic chlorophenols. Copyright © 2016 Elsevier Ltd. All rights reserved.

Geographic information systems for mapping the National Exam Result of Junior High School in 2014 at West Java Province

NASA Astrophysics Data System (ADS)

Setiawan Abdullah, Atje; Nurani Ruchjana, Budi; Rejito, Juli; Rosadi, Rudi; Candra Permana, Fahmi

2017-10-01

National Exam level of schooling is implemented by the Ministry of Education and Culture for the development of education in Indonesia. The national examinations are centrally evaluated by the National Education Standards Agency, and the expected implementation of the national exams can describe the successful implementation of education at the district, municipal, provincial, or national level. In this study, we evaluate, analyze, and explore the implementation of the national exam database of the results of the Junior High School in 2014, with the Junior High School (SMP/MTs) as the smallest unit of analysis at the district level. The method used in this study is a data mining approach using the methodology of Knowledge Discovery in Databases (KDD) using descriptive analysis and spatial mapping of national examinations. The results of the classification of the data mining process to national exams of Junior High School in 2014 using data 6,878 SMP/MTs in West Java showed that 81.01 % were at moderate levels. While the results of the spatial mapping for SMP/MTs in West Java can be explained 36,99 % at the unfavorable level. The evaluation results visualization in graphic is done using ArcGIS to provide position information quality of education in municipal, provincial or national level. The results of this study can be used by management to make decision to improve educational services based on the national exam database in West Java. Keywords: KDD, spatial mapping, national exam.

Assignment of chromosomal locus and evidence for alternatively spliced mRNAs of a human sperm membrane protein (hSMP-1).

PubMed

Wang, H; Miao, S; Chen, D; Wang, L; Koide, S S

1999-10-06

The gene (HSD-1) coding a human sperm membrane protein (hSMP-1) was isolated from a human testis cDNA expression library using antibodies found in the serum of an infertile woman. HSD-1 was localized to a single locus on chromosome 9 and assigned to band 9p12-p13 by fluorescent in situ hybridization (FISH) mapping and DAPI (4,6-diamidino-2-phenylindole) banding, using rat/human somatic cell hybrids and metaphase chromosomes of human lymphocytes. In rescreening a testis lambdagt10 cDNA expression library, the full-length cDNA (HSD-1) and several truncated cDNAs with heterologous regions were isolated from positive clones. The heterology consisted of deletion, insertion and alteration of the 5'-end. These heterologous truncated fragments may be produced by alternative splicing of mRNAs. Two recombinant prokaryotic expression vectors were constructed with one of the heterologous fragment (clone #26) with and without the alternative 5'-end. Escherichia coli transfected with the construct containing the alternative 5'-end failed to produce the recombinant product, whereas those transfected with the vector lacking the 5'-end produced hSMP-1. DNASIS analysis of the structure of #26 mRNA suggests that the 5'-end has a stable secondary configuration that may maintain the mRNA in an inactivated state, whereby hindering its translation and preventing the expression of the gene.

Documentation of program AFTBDY to generate coordinate system for 3D after body using body fitted curvilinear coordinates, part 1

NASA Technical Reports Server (NTRS)

Kumar, D.

1980-01-01

The computer program AFTBDY generates a body fitted curvilinear coordinate system for a wedge curved after body. This wedge curved after body is being used in an experimental program. The coordinate system generated by AFTBDY is used to solve 3D compressible N.S. equations. The coordinate system in the physical plane is a cartesian x,y,z system, whereas, in the transformed plane a rectangular xi, eta, zeta system is used. The coordinate system generated is such that in the transformed plane coordinate spacing in the xi, eta, zeta direction is constant and equal to unity. The physical plane coordinate lines in the different regions are clustered heavily or sparsely depending on the regions where physical quantities to be solved for by the N.S. equations have high or low gradients. The coordinate distribution in the physical plane is such that x stays constant in eta and zeta direction, whereas, z stays constant in xi and eta direction. The desired distribution in x and z is input to the program. Consequently, only the y-coordinate is solved for by the program AFTBDY.

Coordinating Federal Assistance Programs for the Economically Disadvantaged: Recommendations and Background Materials. Special Report No. 31.

ERIC Educational Resources Information Center

National Commission for Employment Policy (DOL), Washington, DC.

This special report from the National Commission for Employment Policy on coordinating federal assistance programs for the economically disadvantaged contains two parts. Part 1 includes recommendations for improving public assistance coordination programs in general and employment and training programs in particular. Eight recommendations focus on…

Characterizing Effects of Nitric Oxide Sterilization on tert-Butyl Acrylate Shape Memory Polymers

NASA Astrophysics Data System (ADS)

Phillippi, Ben

As research into the potential uses of shape memory polymers (SMPs) as implantable medical devices continues to grow and expand, so does the need for an accurate and reliable sterilization mechanism. The ability of an SMP to precisely undergo a programmed shape change will define its ability to accomplish a therapeutic task. To ensure proper execution of the in vivo shape change, the sterilization process must not negatively affect the shape memory behavior of the material. To address this need, this thesis investigates the effectiveness of a benchtop nitric oxide (NOx) sterilization process and the extent to which the process affects the shape memory behavior of a well-studied tert-Butyl Acrylate (tBA) SMP. Quantifying the effects on shape memory behavior was performed using a two-tiered analysis. A two-tiered study design was used to determine if the sterilization process induced any premature shape recovery and to identify any effects that NOx has on the overall shape memory behavior of the foams. Determining the effectiveness of the NOx system--specially, whether the treated samples are more sterile/less contaminated than untreated--was also performed with a two-tiered analysis. In this case, the two-tiered analysis was employed to have a secondary check for contamination. To elaborate, all of the samples that were deemed not contaminated from the initial test were put through a second sterility test to check for contamination a second time. The results of these tests indicated the NOx system is an effective sterilization mechanism and the current protocol does not negatively impact the shape memory behavior of the tBA SMP. The samples held their compressed shape throughout the entirety of the sterilization process. Additionally, there were no observable impacts on the shape memory behavior induced by NOx. Lastly, the treated samples demonstrated lower contamination than the untreated. This thesis demonstrates the effectiveness of NOx as a laboratory scale sterilization mechanism for heat triggered shape memory polymers. The shape memory analysis indicated that the magnitude of the length changes induced by NOx is small enough that it does not make a statistically significant impact on the shape memory behavior of the foams. Additionally, there were no observable effects on the shape memory behavior induced by NOx. The results further indicated the NOx system is effective at sterilizing porous scaffolds, as none of the sterilized samples showed contamination. Testing methods proved to be effective because the initial sterility test was able to identify all of the contaminated samples and preliminary results indicated that NOx sterilization improves the sterility of the foams.

Bangladesh's SMP earns top marks.

PubMed

1984-01-01

A recent evaluation funded by the US Agency for International Development (AID) confirms that Bangladesh's contraceptive social marketing program has exceeded its planner's goals and demonstrated the ability of such a system to widely distribute contraceptive products at a low cost. The project, which began contraceptive sales in 1975, distributes condoms, oral contraceptives, and foaming vaginal tablets. Almost 25% of contraceptive users in Bangladesh are serviced by the social marketing program. By the end of 1983, the program was providing 1,022,000 couple years of protection; this included 84 million condoms, 1.7 million pill cycles, and 5.1 million spermicidal tablets each year. The program's cost for 1 couple year of protection is US$1.66. Social marketing sales have accounted for all increases in couple years of protection experienced by the country's national population program since 1975. Sales have been boosted by recent efforts to draw rural medical practitioners into family planning activities. Mobile film units have further increased sales. The USAID report identifies 3 elements that have spearheaded the social marketing program's achievements: 1) the existence of a committed core management team, 2) the granting of autonomy to make daily decisions to this management team, and 3) central control fo the product distribution system by management rather than by subcontractors. Overall, the social marketing program is credited with legitimizing discussion of contraception in a country formerly considered too conservative to tolerate open product promotion.

20 CFR 627.220 - Coordination with programs under title IV of the Higher Education Act including the Pell grant...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Coordination with programs under title IV of the Higher Education Act including the Pell grant program. 627.220 Section 627.220 Employees' Benefits... of the Higher Education Act including the Pell grant program. (a) Coordination. Financial assistance...

40 CFR 136.5 - Approval of alternate test procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and to the Alternate Test Procedure Program Coordinator, Office of Science and Technology (4303... to the Alternate Test Procedure Program Coordinator, Office of Science and Technology (4303), Office... will be forwarded to the Alternate Test Procedure Program Coordinator, Office of Science and Technology...

40 CFR 136.5 - Approval of alternate test procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and to the Alternate Test Procedure Program Coordinator, Office of Science and Technology (4303... to the Alternate Test Procedure Program Coordinator, Office of Science and Technology (4303), Office... will be forwarded to the Alternate Test Procedure Program Coordinator, Office of Science and Technology...

Availability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval

NASA Astrophysics Data System (ADS)

Kumar, Girish; Jain, Vipul; Gandhi, O. P.

2018-03-01

Maintenance helps to extend equipment life by improving its condition and avoiding catastrophic failures. Appropriate model or mechanism is, thus, needed to quantify system availability vis-a-vis a given maintenance strategy, which will assist in decision-making for optimal utilization of maintenance resources. This paper deals with semi-Markov process (SMP) modeling for steady state availability analysis of mechanical systems that follow condition-based maintenance (CBM) and evaluation of optimal condition monitoring interval. The developed SMP model is solved using two-stage analytical approach for steady-state availability analysis of the system. Also, CBM interval is decided for maximizing system availability using Genetic Algorithm approach. The main contribution of the paper is in the form of a predictive tool for system availability that will help in deciding the optimum CBM policy. The proposed methodology is demonstrated for a centrifugal pump.

Damage healing ability of a shape-memory-polymer-based particulate composite with small thermoplastic contents

NASA Astrophysics Data System (ADS)

Nji, Jones; Li, Guoqiang

2012-02-01

The purpose of this study is to investigate the potential of a shape-memory-polymer (SMP)-based particulate composite to heal structural-length scale damage with small thermoplastic additive contents through a close-then-heal (CTH) self-healing scheme that was introduced in a previous study (Li and Uppu 2010 Comput. Sci. Technol. 70 1419-27). The idea is to achieve reasonable healing efficiencies with minimal sacrifice in structural load capacity. By first closing cracks, the gap between two crack surfaces is narrowed and a lesser amount of thermoplastic particles is required to achieve healing. The particulate composite was fabricated by dispersing copolyester thermoplastic particles in a shape memory polymer matrix. It is found that, for small thermoplastic contents of less than 10%, the CTH scheme followed in this study heals structural-length scale damage in the SMP particulate composite to a meaningful extent and with less sacrifice of structural capacity.

Reticulation of low density shape memory polymer foam with an in vivo demonstration of vascular occlusion

PubMed Central

Rodriguez, Jennifer N.; Miller, Matthew W.; Boyle, Anthony; Horn, John; Yang, Cheng-Kang; Wilson, Thomas S.; Ortega, Jason M.; Small, Ward; Nash, Landon; Skoog, Hunter; Maitland, Duncan J.

2014-01-01

Predominantly closed-cell low density shape memory polymer (SMP) foam was recently reported to be an effective aneurysm filling device in a porcine model (Rodriguez et al., Journal of Biomedical Materials Research Part A 2013: (http://dx.doi.org/10.1002/jbm.a.34782)). Because healing involves blood clotting and cell migration throughout the foam volume, a more open-cell structure may further enhance the healing response. This research sought to develop a non-destructive reticulation process for this SMP foam to disrupt the membranes between pore cells. Non-destructive mechanical reticulation was achieved using a gravity-driven floating nitinol pin array coupled with vibratory agitation of the foam and supplemental chemical etching. Reticulation resulted in a reduced elastic modulus and increased permeability, but did not impede shape memory behavior. Reticulated foams were capable of achieving rapid vascular occlusion in an in vivo porcine model. PMID:25222869

Analysis of intelligent hinged shell structures: deployable deformation and shape memory effect

NASA Astrophysics Data System (ADS)

Shi, Guang-Hui; Yang, Qing-Sheng; He, X. Q.

2013-12-01

Shape memory polymers (SMPs) are a class of intelligent materials with the ability to recover their initial shape from a temporarily fixable state when subjected to external stimuli. In this work, the thermo-mechanical behavior of a deployable SMP-based hinged structure is modeled by the finite element method using a 3D constitutive model with shape memory effect. The influences of hinge structure parameters on the nonlinear loading process are investigated. The total shape memory of the processes the hinged structure goes through, including loading at high temperature, decreasing temperature with load carrying, unloading at low temperature and recovering the initial shape with increasing temperature, are illustrated. Numerical results show that the present constitutive theory and the finite element method can effectively predict the complicated thermo-mechanical deformation behavior and shape memory effect of SMP-based hinged shell structures.

Microfabricated injectable drug delivery system

DOEpatents

Krulevitch, Peter A.; Wang, Amy W.

2002-01-01

A microfabricated, fully integrated drug delivery system capable of secreting controlled dosages of multiple drugs over long periods of time (up to a year). The device includes a long and narrow shaped implant with a sharp leading edge for implantation under the skin of a human in a manner analogous to a sliver. The implant includes: 1) one or more micromachined, integrated, zero power, high and constant pressure generating osmotic engine; 2) low power addressable one-shot shape memory polymer (SMP) valves for switching on the osmotic engine, and for opening drug outlet ports; 3) microfabricated polymer pistons for isolating the pressure source from drug-filled microchannels; 4) multiple drug/multiple dosage capacity, and 5) anisotropically-etched, atomically-sharp silicon leading edge for penetrating the skin during implantation. The device includes an externally mounted controller for controlling on-board electronics which activates the SMP microvalves, etc. of the implant.

A constitutive theory for shape memory polymers: coupling of small and large deformation

NASA Astrophysics Data System (ADS)

Tan, Qiao; Liu, Liwu; Liu, Yanju; Leng, Jinsong; Yan, Xiangqiao; Wang, Haifang

2013-04-01

At high temperatures, SMPs share attributes like rubber and exhibit long-range reversibility. In contrast, at low temperatures they become very rigid and are susceptible to plastic, only small strains are allowable. But there relatively little literature has considered the unique small stain (rubber phase) and large stain (glass phase) coupling in SMPs when developing the constitutive modeling. In this work, we present a 3D constitutive model for shape memory polymers in both low temperature small strain regime and high temperature large strain regime. The theory is based on the work of Liu et al. [15]. Four steps of SMP's thermomechanical loadings cycle are considered in the constitutive model completely. The linear elastic and hyperelastic effects of SMP in different temperatures are also fully accounted for in the proposed model by adopt the neo-Hookean model and the Generalized Hooke's laws.

Long-term MBR performance of polymeric membrane modified with Bismuth-BAL chelate (BisBAL).

PubMed

Turken, Turker; Kose-Mutlu, Borte; Okatan, Selin; Durmaz, Gamze; Guclu, Mehmet C; Guclu, Serkan; Ovez, Suleyman; Koyuncu, Ismail

2018-02-15

An ultrafiltration membrane prepared by polyethersulfone (PES) was modified with Bismuth-BAL chelate (BisBAL) and was used in submerged membrane bioreactor system. Moreover, a control membrane reactor was also tasked to evaluate the effect of BisBAL on the membrane performance. The flux profile, transmembrane pressure, the effect of chemical treatment, cake layer formation, anti-fouling properties against extracellular polymeric substances (EPS) and soluble microbial products (SMP) were studied. The UF modified membrane demonstrated a sustained permeability, low cleaning frequency, and longer filtration time. In terms of anti-EPS and SMP accumulation, the modified membrane showed a lower membrane resistance. It can be illustrated from scanning electron microscopy and confocal laser scanning microscope images that the modified membrane had presented better properties than bare PES membrane, as it was looser and thinner. Thus, the UF membrane proved to be more efficient in terms of permeability and lifetime.

Reversible TAD Chemistry as a Convenient Tool for the Design of (Re)processable PCL-Based Shape-Memory Materials.

PubMed

Defize, Thomas; Riva, Raphaël; Thomassin, Jean-Michel; Alexandre, Michaël; Herck, Niels Van; Prez, Filip Du; Jérôme, Christine

2017-01-01

A chemically cross-linked but remarkably (re)processable shape-memory polymer (SMP) is designed by cross-linking poly(ε-caprolactone) (PCL) stars via the efficient triazolinedione click chemistry, based on the very fast and reversible Alder-ene reaction of 1,2,4-triazoline-3,5-dione (TAD) with indole compounds. Typically, a six-arm star-shaped PCL functionalized by indole moieties at the chain ends is melt-blended with a bisfunctional TAD, directly resulting in a cross-linked PCL-based SMP without the need of post-curing treatment. As demonstrated by the stress relaxation measurement, the labile character of the TAD-indole adducts under stress allows for the solid-state plasticity reprocessing of the permanent shape at will by compression molding of the raw cross-linked material, while keeping excellent shape-memory properties. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effects of Coordination on JTPA Services to AFDC Recipients and an Analysis of Rural Coordination Issues. Third in a Series of Reports on JTPA/Welfare Coordination Efforts.

ERIC Educational Resources Information Center

Schexnayder, Deanna T.; And Others

A Texas study examined the effects of coordination on Job Training Partnership Act (JTPA) program services for Aid to Families with Dependent Children (AFDC) recipients, the REFOCUS-to-JTPA referral process, and rural program coordination issues. The impact of coordination on JTPA services to AFDC caretakers was determined by conducting a…

Real Time Linux - The RTOS for Astronomy?

NASA Astrophysics Data System (ADS)

Daly, P. N.

The BoF was attended by about 30 participants and a free CD of real time Linux-based upon RedHat 5.2-was available. There was a detailed presentation on the nature of real time Linux and the variants for hard real time: New Mexico Tech's RTL and DIAPM's RTAI. Comparison tables between standard Linux and real time Linux responses to time interval generation and interrupt response latency were presented (see elsewhere in these proceedings). The present recommendations are to use RTL for UP machines running the 2.0.x kernels and RTAI for SMP machines running the 2.2.x kernel. Support, both academically and commercially, is available. Some known limitations were presented and the solutions reported e.g., debugging and hardware support. The features of RTAI (scheduler, fifos, shared memory, semaphores, message queues and RPCs) were described. Typical performance statistics were presented: Pentium-based oneshot tasks running > 30kHz, 486-based oneshot tasks running at ~ 10 kHz, periodic timer tasks running in excess of 90 kHz with average zero jitter peaking to ~ 13 mus (UP) and ~ 30 mus (SMP). Some detail on kernel module programming, including coding examples, were presented showing a typical data acquisition system generating simulated (random) data writing to a shared memory buffer and a fifo buffer to communicate between real time Linux and user space. All coding examples were complete and tested under RTAI v0.6 and the 2.2.12 kernel. Finally, arguments were raised in support of real time Linux: it's open source, free under GPL, enables rapid prototyping, has good support and the ability to have a fully functioning workstation capable of co-existing hard real time performance. The counter weight-the negatives-of lack of platforms (x86 and PowerPC only at present), lack of board support, promiscuous root access and the danger of ignorance of real time programming issues were also discussed. See ftp://orion.tuc.noao.edu/pub/pnd/rtlbof.tgz for the StarOffice overheads for this presentation.

Fighting Fragmentation: Coordination of Services for Children and Families.

ERIC Educational Resources Information Center

Soler, Mark; Shauffer, Carole

1993-01-01

Discusses efforts to coordinate services (mental health services in particular) for children and families, and reports initial findings of research by the Youth Law Center to identify specific characteristics of effective coordination programs. Sixteen characteristics of effective coordinated service programs have been identified. (SLD)

77 FR 6172 - Discretionary Bus and Bus Facilities Program and National Research Program Funds.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... Interagency Coordinating Council on Access and Mobility's (Coordinating Council or CCAM) Veterans... of the U.S. Department of Transportation (DOT) through March 31, 2012, and provides contract... coordination and simplified customer access priorities established by the Coordinating Council's partnership...

Evaluation of the Florida coordinated school health program pilot schools project.

PubMed

Weiler, Robert M; Pigg, R Morgan; McDermott, Robert J

2003-01-01

The Florida Department of Education, with CDC funding, designed the Florida Coordinated School Health Program Pilot Schools Project (PSP) to encourage innovative approaches to promote coordinated school health programs (CSHP) in Florida schools. Each of eight pilot schools received $15,000 in project funding, three years of technical assistance including on-site and off-site assistance, a project office resource center, mailings of resource materials, needs assessment and evaluation assistance, and three PSP Summer Institutes. Project evaluators created a context evaluation, approaching each school independently as a "case study" to measure the school's progress in meeting goals established at baseline. Data were collected using the How Healthy is Your School? needs assessment instrument, a School Health Portfolio constructed by each school team, a Pilot Schools Project Team Member Survey instrument, midcourse team interviews, final team interviews, and performance indicator data obtained from pilot and control schools. The PSP posed two fundamental questions: "Can financial resources, professional training, and technical assistance enable individual schools to create and sustain a coordinated school health program?" and "What outcomes reasonably can one expect from a coordinated school health program, assuming programs receive adequate support over time?" First, activities at the eight schools confirmed that a coordinated school health programs can be established and sustained. Program strength and sustainability depend on long-term resources, qualified personnel, and administrative support. Second, though coordinated school health programs may improve school performance indicators, the PSP yielded insufficient evidence to support that belief. Future projects should include robust measurement and evaluation designs, thereby producing conclusive evidence about the influence of a coordinated school health program on such outcomes.

Some quality attributes of low fat ice cream substituted with hulless barley flour and barley ß-glucan.

PubMed

Abdel-Haleem, Amal M H; Awad, R A

2015-10-01

The purpose of this paper is to investigate some quality attributes of low fat ice cream (LFIC) substituted with hulless barley flour (HBF) and barley ß-glucan (BBG). The methodology included in this paper is based on adding HBF (1, 2, 3 and 4 %) as a partial substitution of skim milk powder (SMP) and BBG (0.40 %) as a complete substitution of carboxy methyl cellulose (CMC). All mixes and resultant ice cream samples were evaluated for their physicochemical properties as well as the sensory quality attributes.The results indicated that substitution of SMP with HBF significantly increased total solids (TS), fat and crude fiber, while crude protein and ash significantly decreased in ice cream mixes. BBG exhibited the same manner of control. Specific gravity was gradually increased with adding HBFand BBG in the mixes and therefore the overrun percent was significantly changed in the resultant ice cream. Adding HBF in ice cream formula led to significant decrease in acidity with higher freezing point and the product showed higher ability to meltdown. BBG treatment showed the same trend of control. Values of flow time and viscosity significantly increased with increasing HBF in the ice cream mixes, but these values significantly decreased in BBG mix. The time required to freeze ice cream mixes was decreased with increasing the ratio of HBF but, increased in BBG treatment. The substitution of SMP with 1 and 2 % HBF significantly (P ≤ 0.05) enhanced sensory attributes of ice cream samples. While, BBG treatment achieved mild score and acceptability.

Variable stiffness corrugated composite structure with shape memory polymer for morphing skin applications

NASA Astrophysics Data System (ADS)

Gong, Xiaobo; Liu, Liwu; Scarpa, Fabrizio; Leng, Jinsong; Liu, Yanju

2017-03-01

This work presents a variable stiffness corrugated structure based on a shape memory polymer (SMP) composite with corrugated laminates as reinforcement that shows smooth aerodynamic surface, extreme mechanical anisotropy and variable stiffness for potential morphing skin applications. The smart composite corrugated structure shows a low in-plane stiffness to minimize the actuation energy, but also possess high out-of-plane stiffness to transfer the aerodynamic pressure load. The skin provides an external smooth aerodynamic surface because of the one-sided filling with the SMP. Due to variable stiffness of the shape memory polymer the morphing skin exhibits a variable stiffness with a change of temperature, which can help the skin adjust its stiffness according different service environments and also lock the temporary shape without external force. Analytical models related to the transverse and bending stiffness are derived and validated using finite element techniques. The stiffness of the morphing skin is further investigated by performing a parametric analysis against the geometry of the corrugation and various sets of SMP fillers. The theoretical and numerical models show a good agreement and demonstrate the potential of this morphing skin concept for morphing aircraft applications. We also perform a feasibility study of the use of this morphing skin in a variable camber morphing wing baseline. The results show that the morphing skin concept exhibits sufficient bending stiffness to withstand the aerodynamic load at low speed (less than 0.3 Ma), while demonstrating a large transverse stiffness variation (up to 191 times) that helps to create a maximum mechanical efficiency of the structure under varying external conditions.

Effect of sympathetic activity on capsaicin-evoked pain, hyperalgesia, and vasodilatation.

PubMed

Baron, R; Wasner, G; Borgstedt, R; Hastedt, E; Schulte, H; Binder, A; Kopper, F; Rowbotham, M; Levine, J D; Fields, H L

1999-03-23

Painful nerve and tissue injuries can be exacerbated by activity in sympathetic neurons. The mechanisms of sympathetically maintained pain (SMP) are unclear. To determine the effect of cutaneous sympathetic activity on pain induced by primary afferent C-nociceptor sensitization with capsaicin in humans. In healthy volunteers capsaicin was applied topically (n = 12) or injected into the forearm skin (n = 10) to induce spontaneous pain, dynamic and punctate mechanical hyperalgesia, and antidromic (axon reflex) vasodilatation (flare). Intensity of pain and hyperalgesia, axon reflex vasodilatation (laser Doppler), and flare size and area of hyperalgesia (planimetry) were assessed. The local skin temperature at the application and measurement sites was kept constant at 35 degrees C. In each individual the analyses were performed during the presence of high and low sympathetic skin activity induced by whole-body cooling and warming with a thermal suit. By this method sympathetic vasoconstrictor activity is modulated in the widest range that can be achieved physiologically. The degree of vasoconstrictor discharge was monitored by measuring skin blood flow (laser Doppler) and temperature (infrared thermometry) at the index finger. The intensity and spatial distribution of capsaicin-evoked spontaneous pain and dynamic and punctate mechanical hyperalgesia were identical during the presence of high and low sympathetic discharge. Antidromic vasodilatation and flare size were significantly diminished when sympathetic vasoconstrictor neurons were excited. Cutaneous sympathetic vasoconstrictor activity does not influence spontaneous pain and mechanical hyperalgesia after capsaicin-induced C-nociceptor sensitization. When using physiologic stimulation of sympathetic activity, the capsaicin model is not useful for elucidating mechanisms of SMP. In neuropathic pain states with SMP, different mechanisms may be present.

Genetic Selection of Peptide Aptamers That Interact and Inhibit Both Small Protein B and Alternative Ribosome-Rescue Factor A of Aeromonas veronii C4.

PubMed

Liu, Peng; Chen, Yong; Wang, Dan; Tang, Yanqiong; Tang, Hongqian; Song, Haichao; Sun, Qun; Zhang, Yueling; Liu, Zhu

2016-01-01

Aeromonas veronii is a pathogenic gram-negative bacterium, which infects a variety of animals and results in mass mortality. The stalled-ribosome rescues are reported to ensure viability and virulence under stress conditions, of which primarily include trans-translation and alternative ribosome-rescue factor A (ArfA) in A. veronii. For identification of specific peptides that interact and inhibit the stalled-ribosome rescues, peptide aptamer library (pTRG-SN-peptides) was constructed using pTRG as vector and Staphylococcus aureus nuclease (SN) as scaffold protein, in which 16 random amino acids were introduced to form an exposed surface loop. In the meantime both Small Protein B (SmpB) which acts as one of the key components in trans-translation, and ArfA were inserted to pBT to constitute pBT-SmpB and pBT-ArfA, respectively. The peptide aptamer PA-2 was selected from pTRG-SN-peptides by bacterial two-hybrid system (B2H) employing pBT-SmpB or pBT-ArfA as baits. The conserved sites G133K134 and D138K139R140 of C-terminal SmpB were identified by interacting with N-terminal SN, and concurrently the residue K62 of ArfA was recognized by interacting with the surface loop of the specific peptide aptamer PA-2. The expression plasmids pN-SN or pN-PA-2, which combined the duplication origin of pRE112 with the neokanamycin promoter expressing SN or PA-2, were created and transformed into A. veronii C4, separately. The engineered A. veronii C4 which endowing SN or PA-2 expression impaired growth capabilities under stress conditions including temperatures, sucrose, glucose, potassium chloride (KCl) and antibiotics, and the stress-related genes rpoS and nhaP were down-regulated significantly by Quantitative Real-time PCR (qRT-PCR) when treating in 2.0% KCl. Thus, the engineered A. veronii C4 conferring PA-2 expression might be potentially attenuated vaccine, and also the peptide aptamer PA-2 could develop as anti-microbial drugs targeted to the ribosome rescued factors in A. veronii.

Genetic Selection of Peptide Aptamers That Interact and Inhibit Both Small Protein B and Alternative Ribosome-Rescue Factor A of Aeromonas veronii C4

PubMed Central

Liu, Peng; Chen, Yong; Wang, Dan; Tang, Yanqiong; Tang, Hongqian; Song, Haichao; Sun, Qun; Zhang, Yueling; Liu, Zhu

2016-01-01

Aeromonas veronii is a pathogenic gram-negative bacterium, which infects a variety of animals and results in mass mortality. The stalled-ribosome rescues are reported to ensure viability and virulence under stress conditions, of which primarily include trans-translation and alternative ribosome-rescue factor A (ArfA) in A. veronii. For identification of specific peptides that interact and inhibit the stalled-ribosome rescues, peptide aptamer library (pTRG-SN-peptides) was constructed using pTRG as vector and Staphylococcus aureus nuclease (SN) as scaffold protein, in which 16 random amino acids were introduced to form an exposed surface loop. In the meantime both Small Protein B (SmpB) which acts as one of the key components in trans-translation, and ArfA were inserted to pBT to constitute pBT-SmpB and pBT-ArfA, respectively. The peptide aptamer PA-2 was selected from pTRG-SN-peptides by bacterial two-hybrid system (B2H) employing pBT-SmpB or pBT-ArfA as baits. The conserved sites G133K134 and D138K139R140 of C-terminal SmpB were identified by interacting with N-terminal SN, and concurrently the residue K62 of ArfA was recognized by interacting with the surface loop of the specific peptide aptamer PA-2. The expression plasmids pN-SN or pN-PA-2, which combined the duplication origin of pRE112 with the neokanamycin promoter expressing SN or PA-2, were created and transformed into A. veronii C4, separately. The engineered A. veronii C4 which endowing SN or PA-2 expression impaired growth capabilities under stress conditions including temperatures, sucrose, glucose, potassium chloride (KCl) and antibiotics, and the stress-related genes rpoS and nhaP were down-regulated significantly by Quantitative Real-time PCR (qRT-PCR) when treating in 2.0% KCl. Thus, the engineered A. veronii C4 conferring PA-2 expression might be potentially attenuated vaccine, and also the peptide aptamer PA-2 could develop as anti-microbial drugs targeted to the ribosome rescued factors in A. veronii. PMID:27588015

A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing of Ceramic Composites. Part III; Additive Manufacturing and Characterization of Ceramic Composites

NASA Technical Reports Server (NTRS)

Halbig, Michael C.; Grady, Joseph E.; Singh, Mrityunjay; Ramsey, Jack; Patterson, Clark; Santelle, Tom

2015-01-01

This publication is the third part of a three part report of the project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing" funded by NASA Aeronautics Research Institute (NARI). The objective of this project was to conduct additive manufacturing to produce ceramic matrix composite materials and aircraft engine components by the binder jet process. Different SiC powders with median sizes ranging from 9.3 to 53.0 microns were investigated solely and in powder blends in order to maximize powder packing. Various infiltration approaches were investigated to include polycarbosilane (SMP-10), phenolic, and liquid silicon. Single infiltrations of SMP-10 and phenolic only slightly filled in the interior. When the SMP-10 was loaded with sub-micron sized SiC powders, the infiltrant gave a much better result of filling in the interior. Silicon carbide fibers were added to the powder bed to make ceramic matrix composite materials. Microscopy showed that the fibers were well distributed with no preferred orientation on the horizontal plane and fibers in the vertical plane were at angles as much as 45deg. Secondary infiltration steps were necessary to further densify the material. Two to three extra infiltration steps of SMP-10 increased the density by 0.20 to 0.55 g/cc. However, the highest densities achieved were 2.10 to 2.15 g/cc. Mechanical tests consisting of 4 point bend tests were conducted. Samples from the two CMC panels had higher strengths and strains to failure than the samples from the two nonfiber reinforced panels. The highest strengths were from Set N with 65 vol% fiber loading which had an average strength of 66 MPa. Analysis of the fracture surfaces did not reveal pullout of the reinforcing fibers. Blunt fiber failure suggested that there was not composite behavior. The binder jet additive manufacturing method was used to also demonstrate the fabrication of turbine engine vane components of two different designs and sizes. The binder jet method has benefits over the conventional manufacturing of CMCs in that prototype and production parts can be fabricated quickly and economically with no tooling and extensive hand layup.

Computer programs for smoothing and scaling airfoil coordinates

NASA Technical Reports Server (NTRS)

Morgan, H. L., Jr.

1983-01-01

Detailed descriptions are given of the theoretical methods and associated computer codes of a program to smooth and a program to scale arbitrary airfoil coordinates. The smoothing program utilizes both least-squares polynomial and least-squares cubic spline techniques to smooth interatively the second derivatives of the y-axis airfoil coordinates with respect to a transformed x-axis system which unwraps the airfoil and stretches the nose and trailing-edge regions. The corresponding smooth airfoil coordinates are then determined by solving a tridiagonal matrix of simultaneous cubic-spline equations relating the y-axis coordinates and their corresponding second derivatives. A technique for computing the camber and thickness distribution of the smoothed airfoil is also discussed. The scaling program can then be used to scale the thickness distribution generated by the smoothing program to a specific maximum thickness which is then combined with the camber distribution to obtain the final scaled airfoil contour. Computer listings of the smoothing and scaling programs are included.

Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities. Executive Summary

ERIC Educational Resources Information Center

Kingsley, Chris

2012-01-01

This executive summary describes highlights from the report, "Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities." City-led efforts to build coordinated systems of afterschool programming are an important strategy for improving the health, safety and academic preparedness of children…

Implementation of Helioseismic Data Reduction and Diagnostic Techniques on Massively Parallel Architectures

NASA Technical Reports Server (NTRS)

Korzennik, Sylvain

1997-01-01

Under the direction of Dr. Rhodes, and the technical supervision of Dr. Korzennik, the data assimilation of high spatial resolution solar dopplergrams has been carried out throughout the program on the Intel Delta Touchstone supercomputer. With the help of a research assistant, partially supported by this grant, and under the supervision of Dr. Korzennik, code development was carried out at SAO, using various available resources. To ensure cross-platform portability, PVM was selected as the message passing library. A parallel implementation of power spectra computation for helioseismology data reduction, using PVM was successfully completed. It was successfully ported to SMP architectures (i.e. SUN), and to some MPP architectures (i.e. the CM5). Due to limitation of the implementation of PVM on the Cray T3D, the port to that architecture was not completed at the time.

A customizable model for chronic disease coordination: Lessons learned from the coordinated chronic disease program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voetsch, Karen; Sequeira, Sonia; Chavez, Amy Holmes

In 2012, the Centers for Disease Control and Prevention provided funding and technical assistance to all states and territories to implement the Coordinated Chronic Disease Program, marking the first time that all state health departments had federal resources to coordinate chronic disease prevention and control programs. This article describes lessons learned from this initiative and identifies key elements of a coordinated approach. We analyzed 80 programmatic documents from 21 states and conducted semistructured interviews with 7 chronic disease directors. Six overarching themes emerged: 1) focused agenda, 2) identification of functions, 3) comprehensive planning, 4) collaborative leadership and expertise, 5) managedmore » resources, and 6) relationship building. Furthermore, these elements supported 4 essential activities: 1) evidence-based interventions, 2) strategic use of staff, 3) consistent communication, and 4) strong program infrastructure. On the basis of these elements and activities, we propose a conceptual model that frames overarching concepts, skills, and strategies needed to coordinate state chronic disease prevention and control programs.« less

A customizable model for chronic disease coordination: Lessons learned from the coordinated chronic disease program

DOE PAGES

Voetsch, Karen; Sequeira, Sonia; Chavez, Amy Holmes

2016-03-31

In 2012, the Centers for Disease Control and Prevention provided funding and technical assistance to all states and territories to implement the Coordinated Chronic Disease Program, marking the first time that all state health departments had federal resources to coordinate chronic disease prevention and control programs. This article describes lessons learned from this initiative and identifies key elements of a coordinated approach. We analyzed 80 programmatic documents from 21 states and conducted semistructured interviews with 7 chronic disease directors. Six overarching themes emerged: 1) focused agenda, 2) identification of functions, 3) comprehensive planning, 4) collaborative leadership and expertise, 5) managedmore » resources, and 6) relationship building. Furthermore, these elements supported 4 essential activities: 1) evidence-based interventions, 2) strategic use of staff, 3) consistent communication, and 4) strong program infrastructure. On the basis of these elements and activities, we propose a conceptual model that frames overarching concepts, skills, and strategies needed to coordinate state chronic disease prevention and control programs.« less

School Hearing Test Program.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Noise Abatement and Control.

The document offers guidelines for administration of the Hearing Test Noise Education Program, a program to teach students the harmful effects of excessive moise on their hearing and learning ability. Section 1 outlines the program strategy in terms of program initiation, suggested program coordination, suggested coordinator's responsibilities,…

Promoting Mathematical Argumentation

ERIC Educational Resources Information Center

Rumsey, Chepina; Langrall, Cynthia W.

2016-01-01

The Standards for Mathematical Practice (SMP) in the Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) highlight the mathematical habits that educators should be fostering in mathematics classrooms throughout K-grade 12 education. That argumentation and discourse are important components of developing mathematically proficient…

77 FR 45357 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Senior...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... information collection reports the number of active volunteers, issues and inquiries received, other SMP... and Assistant Secretary for Aging. [FR Doc. 2012-18645 Filed 7-30-12; 8:45 am] BILLING CODE 4154-01-P ...

New vibration-rotation code for tetraatomic molecules exhibiting wide-amplitude motion: WAVR4

NASA Astrophysics Data System (ADS)

Kozin, Igor N.; Law, Mark M.; Tennyson, Jonathan; Hutson, Jeremy M.

2004-11-01

A general computational method for the accurate calculation of rotationally and vibrationally excited states of tetraatomic molecules is developed. The resulting program is particularly appropriate for molecules executing wide-amplitude motions and isomerizations. The program offers a choice of coordinate systems based on Radau, Jacobi, diatom-diatom and orthogonal satellite vectors. The method includes all six vibrational dimensions plus three rotational dimensions. Vibration-rotation calculations with reduced dimensionality in the radial degrees of freedom are easily tackled via constraints imposed on the radial coordinates via the input file. Program summaryTitle of program: WAVR4 Catalogue number: ADUN Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUN Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions: Persons requesting the program must sign the standard CPC nonprofit use license Computer: Developed under Tru64 UNIX, ported to Microsoft Windows and Sun Unix Operating systems under which the program has been tested: Tru64 Unix, Microsoft Windows, Sun Unix Programming language used: Fortran 90 Memory required to execute with typical data: case dependent No. of lines in distributed program, including test data, etc.: 11 937 No. of bytes in distributed program, including test data, etc.: 84 770 Distribution format: tar.gz Nature of physical problem: WAVR4 calculates the bound ro-vibrational levels and wavefunctions of a tetraatomic system using body-fixed coordinates based on generalised orthogonal vectors. Method of solution: The angular coordinates are treated using a finite basis representation (FBR) based on products of spherical harmonics. A discrete variable representation (DVR) [1] based on either Morse-oscillator-like or spherical-oscillator functions [2] is used for the radial coordinates. Matrix elements are computed using an efficient Gaussian quadrature in the angular coordinates and the DVR approximation in the radial coordinates. The solution of the secular problem is carried through a series of intermediate diagonalisations and truncations. Restrictions on the complexity of the problem: (1) The size of the final Hamiltonian matrix that can be practically diagonalised; (2) The DVR approximation for a radial coordinate fails for values of the coordinate near zero—this is remedied only for one radial coordinate by using analytical integration. Typical running time: problem-dependent Unusual features of the program: A user-supplied subroutine to evaluate the potential energy is a program requirement. External routines: BLAS and LAPACK are required. References: [1] J.C. Light, I.P. Hamilton, J.V. Lill, J. Chem. Phys. 92 (1985) 1400. [2] J.R. Henderson, C.R. Le Sueur, J. Tennyson, Comp. Phys. Comm. 75 (1993) 379.

Recovering Servicemembers and Veterans: Sustained Leadership Attention and Systematic Oversight Needed to Resolve Persistent Problems Affecting Care and Benefits

DTIC Science & Technology

2012-11-01

Freedom OND Operation New Dawn PTSD posttraumatic stress disorder RCP Recovery Coordination Program Recovering Warrior...Hotel Aftermath,” Washington Post (Washington, D.C.: Feb. 19, 2007); and “ Hospital Investigates Former Aid Chief,” Washington Post (Washington, D.C...the Federal Recovery Coordination Program (FRCP), the Recovery Coordination Program ( RCP ), and the Interagency Program Office. (See fig. 1.) Figure 1

Mercaptursäure und Nukleosidaddukt im Harn als Biomarker in 1-Hydroxymethylpyren-exponierten Ratten

NASA Astrophysics Data System (ADS)

Ma, Lan

2002-01-01

1-Methylpyren (MP) ist hepatokanzerogen in neugeborenen männlichen Mäusen. Durch Hydroxylierung an der benzylischen Stelle und anschließende Sulfonierung wird MP zu DNA-reaktivem 1-Sulfooxymethylpyren (SMP) aktiviert. In der Ratte führt die Exposition des benzylischen Alkohols, 1-Hydroxymethylpyren (HMP), zur DNA-Adduktbildung in verschiedenen Geweben. Eventuelle Konsequenz der Toxifizierung ist die Ausscheidung entsprechender Mercaptursäure und Nukleosidaddukt im Harn, welche aufgrund ihrer Herkunft als Biomarker eignen könnten. In dieser Arbeit wird die Ausscheidung der Mercaptursäure und des N2-Desoxyguanosinadduktes in HMP-exponierten Ratten untersucht. Nach der Applikation von HMP bzw. MP wurden weniger als 1 % der Dosis als MPMA über Urin und Faeces ausgeschieden (0 - 48 h). Die Ausscheidung erfolgt hauptsächlich in den ersten 24 h nach der Applikation. MPdG konnte weder in Urin noch in Faeces der HMP-behandelten Tieren identifiziert werden. Nach direkter SMP-Applikation wurde MPdG nur in sehr geringe Menge (weniger als 0,9 ppm in 12 h) im Urin gefunden. Aufgrund der geringen Menge eignet sich MPdG nicht als Biomarker. MPMA dagegen, lässt sich analytisch gut erfassen. Es sollte daher untersucht werden, ob MPMA die Toxifizierung des HMP wiederspiegelt. Die Voraussetzung dafür ist die Kenntnisse über das Metabolismusmuster von HMP. Es wurde daher umfassende Untersuchungen zum Metabolismus des HMP durchgeführt. Die Ergebnisse zeigten, dass mehr als 80 % der Metaboiten in ihrer oxidierten Form (PCS, deren Glucuronsäure-Konjugate sowie phenolische Sulfatester der PCS) ausgeschieden wurden. Demnach spielt die Oxidation des HMP zu PCS eine sehr wichtige Rolle bei der Detoxifizierung und Ausscheidung von HMP. Ferne konnte nachgewiesen werden, dass die Enzyme Alkohol- und Aldehyd-Dehydrogenase an der Oxidation von HMP beteiligt waren. Die Inhibitoren Disulfiram und Ethanol der o. g. Enzyme wurde daher zur Modulation der Detoxifizierung in vivo eingesetzt. Die Veränderungen in der Toxifizierung von HMP zu SMP wurden durch die SMP-Konzentration im Plasma, die DNA-Addukthäufigkeit und die MPMA-Ausscheidung erfasst. Die Vorbehandlung von Disulfiram und Ethanol führte zu tendentielle Erhöhung der SMP-Konzentration im Plasma, DNA-Addukthäufigkeit in der Leber und die MPMA-Ausscheidung. Bemerkenswert ist jedoch, dass bereits eine Dosis von 0,2 g Ethanol/kg Körpermasse bereits zu statistisch signifikanten Erhöhungen der MPMA-Ausscheidung bei weiblichen Ratten. 1-Methylpyrene is hepatocarcinogenic in rodents. It is metabolized primarily to 1-hydroxymethylpyrene (HMP) by various cDNA-expressed rat and human cytochromes P450. HMP is activated to a highly reactive sulfuric acid ester, 1-sulfooxymethylpyrene (SMP), by sulphotransferases. In the rat, this activation pathway leads to the formation of DNA adducts in various tissues. Possible consequences of the toxification could be the excretion of the corresponding mercapturic acid and nucleosidadduct in urine and feces. Because of their origin, these substances should reflex the toxification process may be used as biomarkers. We investigate the excretion of 1-methylpyrenyl-mercapturic acid (MPMA) and the excretion of N2-(1-methylpyrenyl)-desoxyguanosin (MPdG) in urine and feces of HMP-treated rats. These studies showed that only a minor portion (< 1 %) of the administered dose of 1-HMP was excreted as mercapturic acid. MPdG could not be identified in urine and feces of HMP-treated rats. Treating rats with the active spieces sulfooxymethylpyrene, 0.9 ppm of the dose was found excreted within 12 h. I now investigated the alternative metabolic pathways of HMP. More than 50 % of the dose (administered intraperitoneally) was excreted as free 1-pyrenyl carboxylic acid and its glucuronic acid conjugate primarily in the urine. Other major urinary metabolites were phenolic sulpho conjugates of ring-oxidized 1-pyrenyl carboxylic acid (> 30 %). Minor metabolites were phenolic sulpho conjugates of HMP (< 5 %). The glucuronic acid conjugate of HMP was found in very small amounts. In total, > 80 % of the metabolites excreted were oxidized at the exocyclic carbon. This side-chain oxidation, probably catalyzed by alcohol and aldehyde dehydrogenases, appears to represent a detoxification pathway. Indeed, administration of ethanol shortly before the administration of HMP to rats increased the levels of SMP detected in blood, of DNA adducts formed in tissues and of mercapturic acid excreted. These effects were observed even at very low dose levels of ethanol (0.2 g per kg body weight). Similar effects were shown after administration of Disulfiram, an inhibitor of aldehyde dehydrogenase.

Setting standards at the forefront of delivery system reform: aligning care coordination quality measures for multiple chronic conditions.

PubMed

DuGoff, Eva H; Dy, Sydney; Giovannetti, Erin R; Leff, Bruce; Boyd, Cynthia M

2013-01-01

The primary study objective is to assess how three major health reform care coordination initiatives (Accountable Care Organizations, Independence at Home, and Community-Based Care Transitions) measure concepts critical to care coordination for people with multiple chronic conditions. We find that there are major differences in quality measurement across these three large and politically important programs. Quality measures currently used or proposed for these new health reform-related programs addressing care coordination primarily capture continuity of care. Other key areas of care coordination, such as care transitions, patient-centeredness, and cross-cutting care across multiple conditions are infrequently addressed. The lack of a comprehensive and consistent measure set for care coordination will pose challenges for healthcare providers and policy makers who seek, respectively, to provide and reward well-coordinated care. In addition, this heterogeneity in measuring care coordination quality will generate new information, but will inhibit comparisons between these care coordination programs. © 2013 National Association for Healthcare Quality.

Setting Standards at the Forefront of Delivery System Reform: Aligning Care Coordination Quality Measures for Multiple Chronic Conditions

PubMed Central

DuGoff, Eva H.; Dy, Sydney; Giovannetti, Erin R.; Leff, Bruce; Boyd, Cynthia M.

2015-01-01

The primary study objective is to assess how three major health reform care coordination initiatives (Accountable Care Organizations, Independence at Home, and Community-based Care Transitions) measure concepts critical to care coordination for people with multiple chronic conditions. We find that there are major differences in quality measurement across these three large and politically important programs. Quality measures currently used or proposed for these new health reform-related programs addressing care coordination primarily capture continuity of care. Other key areas of care coordination, such as care transitions, patient-centeredness, and cross-cutting care across multiple conditions are infrequently addressed. The lack of a comprehensive and consistent measure set for care coordination will pose challenges for health care providers and policymakers who seek, respectively, to provide and reward well-coordinated care. In addition, this heterogeneity in measuring care coordination quality will generate new information, but will inhibit comparisons between these care coordination programs. PMID:24004040

"In Our Corner": A Qualitative Descriptive Study of Patient Engagement in a Community-Based Care Coordination Program.

PubMed

Sefcik, Justine S; Petrovsky, Darina; Streur, Megan; Toles, Mark; O'Connor, Melissa; Ulrich, Connie M; Marcantonio, Sherry; Coburn, Ken; Naylor, Mary D; Moriarty, Helene

2018-03-01

The purpose of this study was to explore participants' experience in the Health Quality Partners (HQP) Care Coordination Program that contributed to their continued engagement. Older adults with multiple chronic conditions often have limited engagement in health care services and face fragmented health care delivery. This can lead to increased risk for disability, mortality, poor quality of life, and increased health care utilization. A qualitative descriptive design with two focus groups was conducted with a total of 20 older adults enrolled in HQP's Care Coordination Program. Conventional content analysis was the analytical technique. The overarching theme resulting from the analysis was "in our corner," with subthemes "opportunities to learn and socialize" and "dedicated nurses," suggesting that these are the primary contributing factors to engagement in HQP's Care Coordination Program. Study findings suggest that nurses play an integral role in patient engagement among older adults enrolled in a care coordination program.

75 FR 24704 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... readily accessible source of data, the CDC EHDI program developed a survey to be used annually that... Intervention (EHDI) programs with quality improvement activities and provide information that will be helpful... Program State Program Coordinators Contacted 57 1 10/60 EHDI Program State Program Coordinators Who Return...

Coordination as a best practice from the polio eradication initiative: Experiences from five member states in the African region of the World Health Organization.

PubMed

Okeibunor, Joseph; Nsubuga, Peter; Salla, Mbaye; Mihigo, Richard; Mkanda, Pascal

2016-10-10

As part of the efforts to eradicate polioviruses in the African Region, structures were put in place to ensure coordinated mobilization and deployment of resources within the framework of the global polio eradication initiative (PEI). The successes of these structures made them not only attractive to other public health interventions, but also caused them to be deployed to the response efforts of other diseases interventions, without any systematic documentation. This article documents the contributions of PEI coordination units to other public health interventions in the African Region of World Health Organization METHODS: We reviewed the contributions of PEI coordination units to other public health interventions in five countries in the African Region. The analysis identified significant involvement of PEI coordination structures in the implementation of routine immunization programs in all the countries analyzed. Similarly, maternal and child health programs were planned, implemented, monitored and evaluation the Inter-Agency Coordination Committees of the PEI programs in the different countries. The hubs system used in PEI in Chad facilitated the efficient coordination of resources for immunization and other public health interventions in Chad. Similarly, in the Democratic Republic of Congo PEI led coordination activities benefited other public health programs like disease control and the national nutrition program, the national malaria control program, and the tuberculosis control program. In Nigeria, the polio Expert Review Committee effectively deployed the Emergency Operation Center for the implementation of prioritized strategies and activities of the National Polio Eradication Emergency Plan, and it was utilized in the response to Ebola Virus Disease outbreak in the country. The PEI-led coordination systems are thus recognized as having made significant contribution to the coordination and delivery of other public health interventions in the African Region. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Coordinating Council. Second Meeting: International Acquisitions

NASA Technical Reports Server (NTRS)

1990-01-01

The theme of this NASA Scientific and Technical Information Program Coordinating Council was International Acquisitions. Included are both visuals for presentations and reports on discussions related to the topics. Presentations were made on the following topics: Coordination council organization international plan, STI global network, International aerospace climate, Foreign exchange program, Foreign activities RMS & AIAA, NASA translation program, A.F. machine translation system, and CIRC cooperation.

78 FR 7987 - Coordination of Policies and Programs To Promote Gender Equality and Empower Women and Girls...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

...--Coordination of Policies and Programs To Promote Gender Equality and Empower Women and Girls Globally #0; #0... January 30, 2013 Coordination of Policies and Programs To Promote Gender Equality and Empower Women and... and advancing the status of all women and girls around the world remains one of the greatest unmet...

Communication Studies of DMP and SMP Machines

NASA Technical Reports Server (NTRS)

Sohn, Andrew; Biswas, Rupak; Chancellor, Marisa K. (Technical Monitor)

1997-01-01

Understanding the interplay between machines and problems is key to obtaining high performance on parallel machines. This paper investigates the interplay between programming paradigms and communication capabilities of parallel machines. In particular, we explicate the communication capabilities of the IBM SP-2 distributed-memory multiprocessor and the SGI PowerCHALLENGEarray symmetric multiprocessor. Two benchmark problems of bitonic sorting and Fast Fourier Transform are selected for experiments. Communication-efficient algorithms are developed to exploit the overlapping capabilities of the machines. Programs are written in Message-Passing Interface for portability and identical codes are used for both machines. Various data sizes and message sizes are used to test the machines' communication capabilities. Experimental results indicate that the communication performance of the multiprocessors are consistent with the size of messages. The SP-2 is sensitive to message size but yields a much higher communication overlapping because of the communication co-processor. The PowerCHALLENGEarray is not highly sensitive to message size and yields a low communication overlapping. Bitonic sorting yields lower performance compared to FFT due to a smaller computation-to-communication ratio.

Values for digestible indispensable amino acid scores (DIAAS) for some dairy and plant proteins may better describe protein quality than values calculated using the concept for protein digestibility-corrected amino acid scores (PDCAAS).

PubMed

Mathai, John K; Liu, Yanhong; Stein, Hans H

2017-02-01

An experiment was conducted to compare values for digestible indispensable amino acid scores (DIAAS) for four animal proteins and four plant proteins with values calculated as recommended for protein digestibility-corrected amino acid scores (PDCAAS), but determined in pigs instead of in rats. Values for standardised total tract digestibility (STTD) of crude protein (CP) and standardised ileal digestibility (SID) of amino acids (AA) were calculated for whey protein isolate (WPI), whey protein concentrate (WPC), milk protein concentrate (MPC), skimmed milk powder (SMP), pea protein concentrate (PPC), soya protein isolate (SPI), soya flour and whole-grain wheat. The PDCAAS-like values were calculated using the STTD of CP to estimate AA digestibility and values for DIAAS were calculated from values for SID of AA. Results indicated that values for SID of most indispensable AA in WPI, WPC and MPC were greater (P<0·05) than for SMP, PPC, SPI, soya flour and wheat. With the exception of arginine and tryptophan, the SID of all indispensable AA in SPI was greater (P<0·05) than in soya flour, and with the exception of threonine, the SID of all indispensable AA in wheat was less (P<0·05) than in all other ingredients. If the same scoring pattern for children between 6 and 36 months was used to calculate PDCAAS-like values and DIAAS, PDCAAS-like values were greater (P<0·05) than DIAAS values for SMP, PPC, SPI, soya flour and wheat indicating that PDCAAS-like values estimated in pigs may overestimate the quality of these proteins.

Extended synaptotagmins are Ca2+-dependent lipid transfer proteins at membrane contact sites.

PubMed

Yu, Haijia; Liu, Yinghui; Gulbranson, Daniel R; Paine, Alex; Rathore, Shailendra S; Shen, Jingshi

2016-04-19

Organelles are in constant communication with each other through exchange of proteins (mediated by trafficking vesicles) and lipids [mediated by both trafficking vesicles and lipid transfer proteins (LTPs)]. It has long been known that vesicle trafficking can be tightly regulated by the second messenger Ca(2+), allowing membrane protein transport to be adjusted according to physiological demands. However, it remains unclear whether LTP-mediated lipid transport can also be regulated by Ca(2+) In this work, we show that extended synaptotagmins (E-Syts), poorly understood membrane proteins at endoplasmic reticulum-plasma membrane contact sites, are Ca(2+)-dependent LTPs. Using both recombinant and endogenous mammalian proteins, we discovered that E-Syts transfer glycerophospholipids between membrane bilayers in the presence of Ca(2+) E-Syts use their lipid-accommodating synaptotagmin-like mitochondrial lipid binding protein (SMP) domains to transfer lipids. However, the SMP domains themselves cannot transport lipids unless the two membranes are tightly tethered by Ca(2+)-bound C2 domains. Strikingly, the Ca(2+)-regulated lipid transfer activity of E-Syts was fully recapitulated when the SMP domain was fused to the cytosolic domain of synaptotagmin-1, the Ca(2+)sensor in synaptic vesicle fusion, indicating that a common mechanism of membrane tethering governs the Ca(2+)regulation of lipid transfer and vesicle fusion. Finally, we showed that microsomal vesicles isolated from mammalian cells contained robust Ca(2+)-dependent lipid transfer activities, which were mediated by E-Syts. These findings established E-Syts as a novel class of LTPs and showed that LTP-mediated lipid trafficking, like vesicular transport, can be subject to tight Ca(2+)regulation.

Postoperative-treatment following open incisional hernia repair: A survey and a review of literature.

PubMed

Paasch, Christoph; Anders, Stefan; Strik, Martin W

2018-05-01

Incisional hernias of the abdominal wall are frequent complication after laparotomy (9-20%). Open incisional hernia repair with sublay mesh placement (SMP) on the posterior rectus sheath is described as being a sufficient method for repairing incisional hernia. In order to ensure wound healing and to therefore prevent recurrence, carrying an abdominal binder (AB) or a pressure dressing (PD) and physical rest for a certain time is the common postoperative recommendation, though the evidence for post-operative treatment is low. Hence, we conducted a survey to reveal the different recommendations given by surgical departments (SD). We conducted a survey among 65 German SDs of the XXX Hospital Group. The SDs were interviewed about the number of open incisional hernia repair with SMP in the time frame of 2013-2014, the known recurrence rate (RR), their recommended prescription of the AB/PD and the time of physical rest. The head physicians of 48 surgical departments answered the questionnaire. The survey revealed 42 different recommendations of postoperative-treatment. The majority of the SDs advices 4 weeks (20,5%) of physical rest and no prescription of the AB (29,5%). No correlation between the known RR and the duration of physical rest was detected. No head physician's prescribes a PD. Due to our findings we assume that a short period of physical rest is a considerable postoperative treatment following an open incisional hernia repair with SMP. By reducing the individual incapacity for work and immobility this would have a social-economic impact. The use of a PD may prevent seroma formation. Further investigations with randomized clinical trials are mandatory to support our hypothesis. Copyright © 2018 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Evaluation of milk powder quality by protein oxidative modifications.

PubMed

Scheidegger, Dana; Radici, Paola M; Vergara-Roig, Víctor A; Bosio, Noelia S; Pesce, Silvia F; Pecora, Rolando P; Romano, José C P; Kivatinitz, Silvia C

2013-06-01

The objective of the present research was to evaluate commercially available milk powders according to their protein oxidative modifications and antioxidant capacity, and to evaluate if these characteristics are related to physical quality parameters such as dispersibility or stability during storage. Fifteen commercially processed spray-dried milk powders were evaluated: 6 whole milk powders (WMP), 4 skim milk powders (SMP), and 5 infant formula powders (IFP). Protein oxidative status was measured as protein carbonyl (PC) content, dityrosine content, and extent of protein polymerization. The level of PC was slightly lower in SMP than in WMP, whereas IFP had more than twice as much PC as WMP (2.8 ± 0.4, 2.1 ± 0.2, and 6.5 ± 1.3 nmol/mg of protein for WMP, SMP, and IFP, respectively). No differences were detected in dityrosine accumulation. Although all the possible pairs of parameters were tested for correlations, we found that 4 parameters were linked: PC, whey content, protein aggregate level, and dispersibility. After 9 mo of storage at -20°C or room temperature, all milk samples were analyzed to evaluate changes in protein oxidative status (PC, dityrosine, and protein integrity) and related parameters. Compared with the initial condition, PC increased in all tested samples after 9 mo of storage at -20°C or at room temperature. Stored milk powders had increased PC and decreased dispersibility compared with prestorage levels. Our results highlight the importance of protein oxidative status in milk powder and its relationship to other related quality parameters, such as protein integrity and dispersibility. Our findings suggest that the understanding of such relationships could help in developing quality differentiation for different types of milk powders in the product market. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Pedal peptide/orcokinin‐type neuropeptide signaling in a deuterostome: The anatomy and pharmacology of starfish myorelaxant peptide in Asterias rubens

PubMed Central

Lin, Ming; Egertová, Michaela; Zampronio, Cleidiane G.; Jones, Alexandra M.

2017-01-01

Abstract Pedal peptide (PP) and orcokinin (OK) are related neuropeptides that were discovered in protostomian invertebrates (mollusks, arthropods). However, analysis of genome/transcriptome sequence data has revealed that PP/OK‐type neuropeptides also occur in a deuterostomian phylum—the echinoderms. Furthermore, a PP/OK‐type neuropeptide (starfish myorelaxant peptide, SMP) was recently identified as a muscle relaxant in the starfish Patiria pectinifera. Here mass spectrometry was used to identify five neuropeptides (ArPPLN1a‐e) derived from the SMP precursor (PP‐like neuropeptide precursor 1; ArPPLNP1) in the starfish Asterias rubens. Analysis of the expression of ArPPLNP1 and neuropeptides derived from this precursor in A. rubens using mRNA in situ hybridization and immunohistochemistry revealed a widespread pattern of expression, with labeled cells and/or processes present in the radial nerve cords, circumoral nerve ring, digestive system (e.g., cardiac stomach) and body wall‐associated muscles (e.g., apical muscle) and appendages (e.g., tube feet and papulae). Furthermore, our data provide the first evidence that neuropeptides are present in the lateral motor nerves and in nerve processes innervating interossicular muscles. In vitro pharmacological tests with SMP (ArPPLN1b) revealed that it causes dose‐dependent relaxation of apical muscle, tube foot and cardiac stomach preparations from A. rubens. Collectively, these anatomical and pharmacological data indicate that neuropeptides derived from ArPPLNP1 act as inhibitory neuromuscular transmitters in starfish, which contrasts with the myoexcitatory actions of PP/OK‐type neuropeptides in protostomian invertebrates. Thus, the divergence of deuterostomes and protostomes may have been accompanied by an inhibitory–excitatory transition in the roles of PP/OK‐type neuropeptides as regulators of muscle activity. PMID:28880392

Characterization of individuals at high risk of developing melanoma in Latin America: bases for genetic counseling in melanoma

PubMed Central

Puig, Susana; Potrony, Miriam; Cuellar, Francisco; Puig-Butille, Joan Anton; Carrera, Cristina; Aguilera, Paula; Nagore, Eduardo; Garcia-Casado, Zaida; Requena, Celia; Kumar, Rajiv; Landman, Gilles; Costa Soares de Sá, Bianca; Gargantini Rezze, Gisele; Facure, Luciana; de Avila, Alexandre Leon Ribeiro; Achatz, Maria Isabel; Carraro, Dirce Maria; Duprat Neto, João Pedreira; Grazziotin, Thais C.; Bonamigo, Renan R.; Rey, Maria Carolina W.; Balestrini, Claudia; Morales, Enrique; Molgo, Montserrat; Bakos, Renato Marchiori; Ashton-Prolla, Patricia; Giugliani, Roberto; Larre Borges, Alejandra; Barquet, Virginia; Pérez, Javiera; Martínez, Miguel; Cabo, Horacio; Cohen Sabban, Emilia; Latorre, Clara; Carlos-Ortega, Blanca; Salas-Alanis, Julio C; Gonzalez, Roger; Olazaran, Zulema; Malvehy, Josep; Badenas, Celia

2016-01-01

Purpose: CDKN2A is the main high-risk melanoma-susceptibility gene, but it has been poorly assessed in Latin America. We sought to analyze CDKN2A and MC1R in patients from Latin America with familial and sporadic multiple primary melanoma (SMP) and compare the data with those for patients from Spain to establish bases for melanoma genetic counseling in Latin America. Genet Med 18 7, 727–736. Methods: CDKN2A and MC1R were sequenced in 186 Latin American patients from Argentina, Brazil, Chile, Mexico, and Uruguay, and in 904 Spanish patients. Clinical and phenotypic data were obtained. Genet Med 18 7, 727–736. Results: Overall, 24 and 14% of melanoma-prone families in Latin America and Spain, respectively, had mutations in CDKN2A. Latin American families had CDKN2A mutations more frequently (P = 0.014) than Spanish ones. Of patients with SMP, 10% of those from Latin America and 8.5% of those from Spain had mutations in CDKN2A (P = 0.623). The most recurrent CDKN2A mutations were c.-34G>T and p.G101W. Latin American patients had fairer hair (P = 0.016) and skin (P < 0.001) and a higher prevalence of MC1R variants (P = 0.003) compared with Spanish patients. Genet Med 18 7, 727–736. Conclusion: The inclusion criteria for genetic counseling of melanoma in Latin America may be the same criteria used in Spain, as suggested in areas with low to medium incidence, SMP with at least two melanomas, or families with at least two cases among first- or second-degree relatives. Genet Med 18 7, 727–736. PMID:26681309

Program Implementation Approaches to Build and Sustain Health Care Coordination for Type 2 Diabetes.

PubMed

Fitzgerald, Tania M; Williams, Pam A; Dodge, Julia A; Quinn, Martha; Heminger, Christina L; Moultrie, Rebecca; Taylor, Olivia; Nelson, Belinda W; Lewis, Megan A

2017-03-01

As more people enter the U.S. health care system under the Affordable Care Act (ACA), it is increasingly critical to deliver coordinated, high-quality health care. The ACA supports implementation and sustainability of efficient health care models, given expected limits in available resources. This article highlights implementation strategies to build and sustain care coordination, particularly ones consistent with and reinforced by the ACA. It focuses on disease self-management programs to improve the health of patients with type 2 diabetes, exemplified by grantees of the Alliance to Reduce Disparities in Diabetes. We conducted interviews with grantee program representatives throughout their 5-year programs and conducted a qualitative framework analysis of data to identify key themes related to care coordination. The most promising care coordination strategies that grantee programs described included establishing clinic-community collaborations, embedding community health workers within care management teams, and sharing electronic data. Establishing provider buy-in was crucial for these strategies to be effective. This article adds new insights into strategies promoting effective care coordination. The strategies that grantees implemented throughout the program align with ACA requirements, underscoring their relevance to the changing U.S. health care environment and the likelihood of further support for program sustainability.

Assessment of the Sustainability Capacity of a Coordinated Approach to Chronic Disease Prevention.

PubMed

Moreland-Russell, Sarah; Combs, Todd; Polk, LaShaun; Dexter, Sarah

This article outlines some factors that influenced the sustainability capacity of a coordinated approach to chronic disease prevention in state and territory health departments. This study involved a cross-sectional design and mixed-methods approach. Quantitative data were collected using the Program Sustainability Assessment Tool (PSAT), a 40-item multiple-choice instrument that assesses 8 domains of sustainability capacity (environmental support, funding stability, partnerships, organizational capacity, program evaluation, program adaptation, communications, and strategic planning). Qualitative data were collected via phone interviews. The PSAT was administered to staff and stakeholders from public health departments in 50 US states, District of Columbia, and Puerto Rico, who were involved in the implementation of coordinated chronic disease programs. Phone interviews were conducted with program coordinators in each state. Sustainability score patterns and state-level categorical results, as well as strengths and opportunities for improvement across the 8 program sustainability domains, were explored. On average, programs reported the strongest sustainability capacity in the domains of program adaptation, environmental support, and organizational capacity, while funding stability, strategic planning, and communications yielded lowest scores, indicating weakest capacity. Scores varied the most by state in environmental support and strategic planning. The PSAT results highlight the process through which states approached the sustainability of coordinated chronic disease initiatives. This process included an initial focus on program evaluation and partnerships with transfer of priority to long-term strategic planning, communications, and funding stability to further establish coordinated chronic disease efforts. Qualitative interviews provided further context to PSAT results, indicating that leadership, communications, partnerships, funding stability, and policy change were perceived as keys to success of the transition. Integrating these findings into future efforts may help those in transition establish greater sustainability capacity. The PSAT results and interviews provide insight into the capacity for sustainability for programs transitioning from traditional siloed programs to coordinated chronic disease programs.

Oki-Doku: Number Puzzles

ERIC Educational Resources Information Center

Gomez, Cristina; Novak, Dani

2014-01-01

The Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) emphasize the Standards for Mathematical Practice (SMP) that describe processes and proficiencies included in the NCTM Process Standards (NCTM 2000) and in the Strands for Mathematical Proficiency (NRC 2001). The development of these mathematical practices should happen in…

A shape memory polymer concrete crack closure system activated by electrical current

NASA Astrophysics Data System (ADS)

Teall, Oliver; Pilegis, Martins; Davies, Robert; Sweeney, John; Jefferson, Tony; Lark, Robert; Gardner, Diane

2018-07-01

The presence of cracks has a negative impact on the durability of concrete by providing paths for corrosive materials to the embedded steel reinforcement. Cracks in concrete can be closed using shape memory polymers (SMP) which produce a compressive stress across the crack faces. This stress has been previously found to enhance the load recovery associated with autogenous self-healing. This paper details the experiments undertaken to incorporate SMP tendons containing polyethylene terephthalate (PET) filaments into reinforced and unreinforced 500 × 100 × 100 mm structural concrete beam samples. These tendons are activated via an electrical supply using a nickel-chrome resistance wire heating system. The set-up, methodology and results of restrained shrinkage stress and crack closure experiments are explained. Crack closure of up to 85% in unreinforced beams and 26%–39% in reinforced beams is measured using crack-mouth opening displacement, microscope and digital image correlation equipment. Conclusions are made as to the effectiveness of the system and its potential for application within industry.

The Implementation of Integrated Natural Science Textbook of Junior High School be Charged on Character-based Shared Models to Improve the Competence of Learners' Knowledge

NASA Astrophysics Data System (ADS)

Rahmiwati, S.; Ratnawulan; Yohandri

2018-04-01

The process of science learning can take place if there is an attempt to create an active learning atmosphere and can improve the knowledge competence of learners. One of the efforts made is to use learning resources. Textbooks are a learning resource used by learners. This study aims to describe the increase of knowledge’s competence of learners with integrated Natural Science (IPA) textbook of Junior High School (SMP) be charged on character-based shared model. The method used pre-test, post-test design with one group using the class as a research subject. Pre-test was given before treatment to measure student’s initial understanding of the problem, while the post-test was given to measure student’s final understanding.The subject of this research is students of class VII SMP N 13 Padang. Result of gain score is 0,73. The result showed competence student’s knowledge increased significantly and high categorized.

Biogas production from undiluted chicken manure and maize silage: A study of ammonia inhibition in high solids anaerobic digestion.

PubMed

Sun, Chen; Cao, Weixing; Banks, Charles J; Heaven, Sonia; Liu, Ronghou

2016-10-01

The feasibility of co-digestion of chicken manure (CM) and maize silage (MS) without water dilution was investigated in 5-L digesters. Specific methane production (SMP) of 0.309LCH4g(-1) volatile solids (VS) was achieved but only at lower %CM. Above a critical threshold for total ammonia nitrogen (TAN), estimated at 7gNL(-1), VFA accumulated with a characteristic increase in acetic acid followed by its reduction and an increase in propionic acid. During this transition the predominant methanogenic pathway was hydrogenotrophic. Methanogenesis was completely inhibited at TAN of 9gNL(-1). The low digestibility of the mixed feedstock led to a rise in digestate TS and a reduction in SMP over the 297-day experimental period. Methanogenesis appeared to be failing in one digester but was recovered by reducing the %CM. Co-digestion was feasible with CM ⩽20% of feedstock VS, and the main limiting factor was ammonia inhibition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pharmaceutical standardization of Apamarga kshara.

PubMed

Jadav, Hasmukh R; Galib, R; Prajapati, Pradeep Kumar

2015-01-01

Standardization of herbal drugs is essential to certify their quality and purity. Kshara (alkaline substance) of Apamarga (Achyranthes aspera Linn.) is an important constituent in many Ayurvedic formulations, but its standard manufacturing process (SMP) is not attempted till date. This study is aimed to establish SMP for Apamarga kshara. In pharmaceutical process; generally the sediments of ash obtained at the end of washes will be discarded. However, in the study, we attempted to wash the sediments repeatedly by adding water to extract more Kshara. Apamarga was collected from the local area and authenticated. Kshara was prepared by following standard methods and the preliminary physicochemical profile was developed. It is observed that the ash yields Kshara even in the consecutive washes. First wash yielded 21.23% w/w Kshara, while the second and third washes yielded 9.38% w/w and 4.76% w/w, respectively. Repeated washes yield more Kshara. Hence, it is advocated to wash the ashes repeatedly. As the findings are encouraging, similar experiments can be extended to all other Kshara preparations.

Pharmaceutical standardization of Apamarga kshara

PubMed Central

Jadav, Hasmukh R.; Galib, R.; Prajapati, Pradeep Kumar

2015-01-01

Standardization of herbal drugs is essential to certify their quality and purity. Kshara (alkaline substance) of Apamarga (Achyranthes aspera Linn.) is an important constituent in many Ayurvedic formulations, but its standard manufacturing process (SMP) is not attempted till date. This study is aimed to establish SMP for Apamarga kshara. In pharmaceutical process; generally the sediments of ash obtained at the end of washes will be discarded. However, in the study, we attempted to wash the sediments repeatedly by adding water to extract more Kshara. Apamarga was collected from the local area and authenticated. Kshara was prepared by following standard methods and the preliminary physicochemical profile was developed. It is observed that the ash yields Kshara even in the consecutive washes. First wash yielded 21.23% w/w Kshara, while the second and third washes yielded 9.38% w/w and 4.76% w/w, respectively. Repeated washes yield more Kshara. Hence, it is advocated to wash the ashes repeatedly. As the findings are encouraging, similar experiments can be extended to all other Kshara preparations. PMID:26834430

Reticulation of low density shape memory polymer foam with an in vivo demonstration of vascular occlusion

DOE PAGES

Rodriguez, Jennifer N.; Miller, Matthew W.; Boyle, Anthony; ...

2014-08-11

Recently, predominantly closed-cell low density shape memory polymer (SMP) foam was reported to be an effective aneurysm filling device in a porcine model (Rodriguez et al., Journal of Biomedical Materials Research Part A 2013: (http://dx.doi.org/10.1002/jbm.a.34782)). Because healing involves blood clotting and cell migration throughout the foam volume, a more open-cell structure may further enhance the healing response. This research sought to develop a non-destructive reticulation process for this SMP foam to disrupt the membranes between pore cells. Non-destructive mechanical reticulation was achieved using a gravity-driven floating nitinol pin array coupled with vibratory agitation of the foam and supplemental chemical etching.more » Lastly, reticulation resulted in a reduced elastic modulus and increased permeability, but did not impede the shape memory behavior. Reticulated foams were capable of achieving rapid vascular occlusion in an in vivo porcine model.« less

Longitudinal evaluation of the microleakage of dentin bonding agents used to seal resected root apices.

PubMed

Vignaroli, P A; Anderson, R W; Pashley, D H

1995-10-01

A material that bonds to dentin and seals both the root canal and exposed dentinal tubules would be desirable following root resection. The purpose of this study was to measure the sealing ability of four dentin bonding agents on the resected root end. The bonding systems evaluated were Amalgambond (AMB), Scotchbond Multi-Purpose (SMP), Prisma Universal Bond 3 (PUB 3), and All-Bond 2 (AB2). All materials were applied directly to the resected root end without a class I preparation. One-half of the roots in each group were contaminated with human blood before bonding. Microleakage was measured using fluid filtration at various time intervals from 1 to 24 wk. Results indicated that all dentin bonding agents significantly reduced apical microleakage compared with prebonded controls at all time intervals. Blood contamination did not adversely affect the sealing ability of AMB, PUB 3, or SMP. The blood-contaminated AB2 group displayed significantly greater microleakage after 12 and 24 wk than the uncontaminated roots.

Sequential changes of main components in different kinds of milk powders using two-dimensional infrared correlation analysis

NASA Astrophysics Data System (ADS)

Zhou, Qun; Sun, Su-Qin; Yu, Lu; Xu, Chang-Hua; Noda, Isao; Zhang, Xin-Rong

2006-11-01

Infrared (IR) spectroscopy and two-dimensional (2D) correlation IR spectroscopy are shown to offer some information about stability and shelf life of milk powders without separation and extraction of individual components in this paper. Temperature has been chosen as the perturbation to monitor the infrared behavior of various milk powders, namely, whole milk powder (WMP), sweet whole milk powder (Sweet WMP), low-fat milk powder (LFMP), and skim milk powder (SMP). The sequential order of changes in protein, fat and carbohydrates (mainly lactose) in milk powders is studied for the first time. The protein changes before the sucrose in WMP, whereas the sucrose changes before the protein in Sweet WMP under temperature perturbation. It is also found that in SMP, carbohydrate changes prior to protein whereas in LFMP and WMP protein changes first as the temperature is increased. The conclusion can provide some useful reference to understand the thermal stability of milk powders.

Energy-efficient constellations design and fast decoding for space-collaborative MIMO visible light communications

NASA Astrophysics Data System (ADS)

Zhu, Yi-Jun; Liang, Wang-Feng; Wang, Chao; Wang, Wen-Ya

2017-01-01

In this paper, space-collaborative constellations (SCCs) for indoor multiple-input multiple-output (MIMO) visible light communication (VLC) systems are considered. Compared with traditional VLC MIMO techniques, such as repetition coding (RC), spatial modulation (SM) and spatial multiplexing (SMP), SCC achieves the minimum average optical power for a fixed minimum Euclidean distance. We have presented a unified SCC structure for 2×2 MIMO VLC systems and extended it to larger MIMO VLC systems with more transceivers. Specifically for 2×2 MIMO VLC, a fast decoding algorithm is developed with decoding complexity almost linear in terms of the square root of the cardinality of SCC, and the expressions of symbol error rate of SCC are presented. In addition, bit mappings similar to Gray mapping are proposed for SCC. Computer simulations are performed to verify the fast decoding algorithm and the performance of SCC, and the results demonstrate that the performance of SCC is better than those of RC, SM and SMP for indoor channels in general.

Change in the fouling propensity of sludge in membrane bioreactors (MBR) in relation to the accumulation of biopolymer clusters.

PubMed

Sun, Fei-yun; Wang, Xiao-mao; Li, Xiao-yan

2011-04-01

A membrane bioreactor (MBR) and an activated sludge process (ASP) were operated side by side to evaluate the change of sludge supernatant characteristics and the evolution of the sludge fouling propensity. The MBR sludge had a higher organic concentration and more biopolymer clusters (BPC) in the supernatant compared with ASP. BPC increased in both concentration and size in the MBR. The results show that the change in the liquid-phase property had a profound effect on the sludge fouling propensity. MBR operation transformed typical activated sludge to MBR sludge with a higher fouling propensity. Distinct from the ASP, membrane filtration retained soluble microbial products (SMP) within the MBR, and the vast membrane surface provided a unique environment for the transformation of SMP to large size BPC, leading to further sludge deposition on the membrane surface. Thus, membrane filtration is the crucial cause of the inevitable fouling problem in submerged MBRs. Copyright © 2011 Elsevier Ltd. All rights reserved.

Influence of fermentation liquid from waste activated sludge on anoxic/oxic- membrane bioreactor performance: Nitrogen removal, membrane fouling and microbial community.

PubMed

Han, Xiaomeng; Zhou, Zhen; Mei, Xiaojie; Ma, Yan; Xie, Zhenfang

2018-02-01

In order to investigate effects of waste activated sludge (WAS) fermentation liquid on anoxic/oxic- membrane bioreactor (A/O-MBR), two A/O-MBRs with and without WAS fermentation liquid addition were operated in parallel. Results show that addition of WAS fermentation liquid clearly improved denitrification efficiency without deterioration of nitrification, while severe membrane fouling occurred. WAS fermentation liquid resulted in an elevated production of proteins and humic acids in bound extracellular polymeric substance (EPS) and release of organic matter with high MW fractions in soluble microbial product (SMP) and loosely bound EPS (LB-EPS). Measurement of deposition rate and fluid structure confirmed increased fouling potential of SMP and LB-EPS. γ-Proteobacteria and Ferruginibacter, which can secrete and export EPS, were also found to be abundant in the MBR with WAS fermentation liquid. It is implied that when WAS fermentation liquid was applied, some operational steps to control membrane fouling should be employed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Artificial muscles made of chiral two-way shape memory polymer fibers

NASA Astrophysics Data System (ADS)

Yang, Qianxi; Fan, Jizhou; Li, Guoqiang

2016-10-01

In this work, we demonstrate the unusual improvement of the tensile actuation of hierarchically chiral structured artificial muscle made of two-way shape memory polymer (2W-SMP) fiber. Experimental results show that the chemically cross-linked poly(ethylene-co-vinyl acetate) 2W-SMP fibers possess an average negative coefficient of thermal expansion (NCTE) that is at least one order higher than that of the polyethylene fiber used previously. As expected, the increase in axial thermal contraction of the precursor fiber leads to an increase in the recovered torque ( 4.4 Nmm ) of the chiral fiber and eventually in the tensile actuation of the twisted-then-coiled artificial muscle ( 67.81 ±1.82 % ). A mechanical model based on Castigliano's second theorem is proposed, and the calculated result is consistent with the experimental result (64.17% tensile stroke). The model proves the significance of the NCTE and the recovered torque on tensile actuation of the artificial muscle and can be used as a guidance for the future design.

Changes in characteristics of soluble microbial products and extracellular polymeric substances in membrane bioreactor coupled with worm reactor: relation to membrane fouling.

PubMed

Tian, Yu; Li, Zhipeng; Lu, Yaobin

2012-10-01

The study focused on the membrane fouling mitigation observed in a membrane bioreactor (MBR) coupled with worm reactor system. During the operation time of 100 days, the transmembrane pressure (TMP) in the combined system was maintained less than 5 kPa, while the final TMP in the Control-MBR increased to 30 kPa. The changes in properties of soluble microbial products (SMP) and extracellular polymeric substances (EPS) after worm predation were investigated by means of various analytical techniques. It was found that due to the worm predation, the reduced amount of EPS was far more than the increased amount of SMP leading to a significant decrease of protein-like substances which were dominant in the membrane foulants. Except for the content decrease, worm predation destroyed the functional groups of simple aromatic proteins and tryptophan protein-like substances in EPS, making them have lower tendency attaching to the membrane in the combined system. Copyright © 2012 Elsevier Ltd. All rights reserved.

42 CFR 431.636 - Coordination of Medicaid with the Children's Health Insurance Program (CHIP).

Code of Federal Regulations, 2010 CFR

2010-10-01

... Insurance Program (CHIP). 431.636 Section 431.636 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES...'s Health Insurance Program (CHIP). (a) Statutory basis. This section implements— (1) Section 2102(b... coordination between a State child health program and other public health insurance programs. (b) Obligations...

The patient perspective: utilizing focus groups to inform care coordination for high-risk medicaid populations.

PubMed

Sheff, Alex; Park, Elyse R; Neagle, Mary; Oreskovic, Nicolas M

2017-07-25

Care coordination programs for high-risk, high-cost patients are a critical component of population health management. These programs aim to improve outcomes and reduce costs and have proliferated over the last decade. Some programs, originally designed for Medicare patients, are now transitioning to also serve Medicaid populations. However, there are still gaps in the understanding of what barriers to care Medicaid patients experience, and what supports will be most effective for providing them care coordination. We conducted two focus groups (n = 13) and thematic analyses to assess the outcomes drivers and programmatic preferences of Medicaid patients enrolled in a high-risk care coordination program at a major academic medical center in Boston, MA. Two focus groups identified areas where care coordination efforts were having a positive impact, as well as areas of unmet needs among the Medicaid population. Six themes emerged from the focus groups that clustered in three groupings: In the first group (1) enrollment in an existing medical care coordination programs, and (2) provider communication largely presented as positive accounts of assistance, and good relationships with providers, though participants also pointed to areas where these efforts fell short. In the second group (3) trauma histories, (4) mental health challenges, and (5) executive function difficulties all presented challenges faced by high-risk Medicaid patients that would likely require redress through additional programmatic supports. Finally, in the third group, (6) peer-to-peer support tendencies among patients suggested an untapped resource for care coordination programs. Programs aimed at high-risk Medicaid patients will want to consider programmatic adjustments to attend to patient needs in five areas: (1) provider connection/care coordination, (2) trauma, (3) mental health, (4) executive function/paperwork and coaching support, and (5) peer-to-peer support.

Effects of a short-term coordination exercise program during school recess: agility of seven- to eight-year-old elementary school children.

PubMed

Yasumitsu, Tatsuo; Nogawa, Haruo

2013-04-01

This study tested the effect of a short-term coordination program focused on improving the agility of school children ages 7 to 8 years. Healthy Japanese children were placed in an experimental group of 26 children (10 girls, 16 boys) and a control group of 20 children (9 girls, 11 boys). The experimental group participated in 10 coordination program sessions during recesses; each session was performed 1 to 3 times per week, for 26 days. No differences were observed between the groups in repeated side-step scores prior to the program, although an interaction was observed after the completion of the treatment. The short-term coordination program was effective in increasing the agility of elementary school children aged 7 to 8 years.

40 CFR 501.3 - Coordination with other programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Coordination with other programs. 501.3 Section 501.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.3...

40 CFR 501.3 - Coordination with other programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Coordination with other programs. 501.3 Section 501.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.3...

40 CFR 501.3 - Coordination with other programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Coordination with other programs. 501.3 Section 501.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.3...

40 CFR 501.3 - Coordination with other programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Coordination with other programs. 501.3 Section 501.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.3...

40 CFR 501.3 - Coordination with other programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Coordination with other programs. 501.3 Section 501.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.3...

Harnessing bistability for directional propulsion of soft, untethered robots.

PubMed

Chen, Tian; Bilal, Osama R; Shea, Kristina; Daraio, Chiara

2018-05-29

In most macroscale robotic systems, propulsion and controls are enabled through a physical tether or complex onboard electronics and batteries. A tether simplifies the design process but limits the range of motion of the robot, while onboard controls and power supplies are heavy and complicate the design process. Here, we present a simple design principle for an untethered, soft swimming robot with preprogrammed, directional propulsion without a battery or onboard electronics. Locomotion is achieved by using actuators that harness the large displacements of bistable elements triggered by surrounding temperature changes. Powered by shape memory polymer (SMP) muscles, the bistable elements in turn actuate the robot's fins. Our robots are fabricated using a commercially available 3D printer in a single print. As a proof of concept, we show the ability to program a vessel, which can autonomously deliver a cargo and navigate back to the deployment point.

Rapid Conditioning for the Next Generation Melting System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rue, David M.

This report describes work on Rapid Conditioning for the Next Generation Melting System under US Department of Energy Contract DE-FC36-06GO16010. The project lead was the Gas Technology Institute (GTI). Partners included Owens Corning and Johns Manville. Cost share for this project was provided by NYSERDA (the New York State Energy Research and Development Authority), Owens Corning, Johns Manville, Owens Illinois, and the US natural gas industry through GTI’s SMP and UTD programs. The overreaching focus of this project was to study and develop rapid refining approaches for segmented glass manufacturing processes using high-intensity melters such as the submerged combustion melter.more » The objectives of this project were to 1) test and evaluate the most promising approaches to rapidly condition the homogeneous glass produced from the submerged combustion melter, and 2) to design a pilot-scale NGMS system for fiberglass recycle.« less

Coordination Problems in Graduate Programs for Two-Year College English Teachers.

ERIC Educational Resources Information Center

Sparrow, W. Keats

Six problems in coordinating a graduate program for two-year college English teachers are discussed in this paper. The problems are: how to implement national guidelines for such programs, how to staff the programs, how to accommodate traditional university personnel guidelines and regulations to the nontraditional staff for the programs, how to…

Using Google Apps to Develop the Mathematical Practices

ERIC Educational Resources Information Center

Layton, Rebecca D.; Cady, Jo Ann; Layton, Christopher A.

2017-01-01

Recent recommendations for the teaching of mathematics place an emphasis on the Common Core's Standards for Mathematical Practice (SMP) (CCSSI 2010). The SMPs emphasize constructing viable arguments, critiquing the ideas of others, reasoning abstractly and quantitatively, and using computational procedures. These skills, including the use of…

Perceived benefits and challenges of coordinated approaches to chronic disease prevention in state health departments.

PubMed

Allen, Peg; Sequeira, Sonia; Best, Leslie; Jones, Ellen; Baker, Elizabeth A; Brownson, Ross C

2014-05-08

Chronic disease prevention efforts have historically been funded categorically according to disease or risk factor. Federal agencies are now progressively starting to fund combined programs to address common risk. The purpose of this study was to inform transitions to coordinated chronic disease prevention by learning views on perceived benefits and challenges of a coordinated approach to funding. A national survey on evidence-based public health was conducted from March through May 2013 among state health department employees working in chronic disease prevention (N = 865). Participants were asked to rank the top 3 benefits and top 3 challenges in coordinating chronic disease approaches from provided lists and could provide additional responses. Descriptive analyses, χ(2) tests, and analysis of variance were conducted. The most common perceived benefits of coordinated approaches to chronic disease prevention were improved health outcomes, common risk factors better addressed, and reduced duplication of program efforts. The most common perceived challenges were funding restrictions, such as disease-specific performance measures; competing priorities; lack of communication across programs; funding might be reduced; agency not structured for program coordination; and loss of disease-specific partner support. Rankings of benefits and challenges were similar across states and participant roles; the perceived challenges "lack of communication across programs" (P = .02) and "funding might be reduced" differed by program area (P < .001). Findings can be used by funding agencies and state health departments for planning, training, and technical assistance. The information on perceived challenges demonstrates the need to improve communication across programs, enhance organizational support for coordinated approaches, and create benefits for organizational partners.

Vibrational energy distribution analysis (VEDA): scopes and limitations.

PubMed

Jamróz, Michał H

2013-10-01

The principle of operations of the VEDA program written by the author for Potential Energy Distribution (PED) analysis of theoretical vibrational spectra is described. Nowadays, the PED analysis is indispensible tool in serious analysis of the vibrational spectra. To perform the PED analysis it is necessary to define 3N-6 linearly independent local mode coordinates. Already for 20-atomic molecules it is a difficult task. The VEDA program reads the input data automatically from the Gaussian program output files. Then, VEDA automatically proposes an introductory set of local mode coordinates. Next, the more adequate coordinates are proposed by the program and optimized to obtain maximal elements of each column (internal coordinate) of the PED matrix (the EPM parameter). The possibility for an automatic optimization of PED contributions is a unique feature of the VEDA program absent in any other programs performing PED analysis. Copyright © 2013 Elsevier B.V. All rights reserved.

Vibrational Energy Distribution Analysis (VEDA): Scopes and limitations

NASA Astrophysics Data System (ADS)

Jamróz, Michał H.

2013-10-01

The principle of operations of the VEDA program written by the author for Potential Energy Distribution (PED) analysis of theoretical vibrational spectra is described. Nowadays, the PED analysis is indispensible tool in serious analysis of the vibrational spectra. To perform the PED analysis it is necessary to define 3N-6 linearly independent local mode coordinates. Already for 20-atomic molecules it is a difficult task. The VEDA program reads the input data automatically from the Gaussian program output files. Then, VEDA automatically proposes an introductory set of local mode coordinates. Next, the more adequate coordinates are proposed by the program and optimized to obtain maximal elements of each column (internal coordinate) of the PED matrix (the EPM parameter). The possibility for an automatic optimization of PED contributions is a unique feature of the VEDA program absent in any other programs performing PED analysis.

24 CFR 984.202 - Program Coordinating Committee (PCC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT SECTION 8 AND PUBLIC HOUSING FAMILY SELF-SUFFICIENCY PROGRAM Program Development and... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Program Coordinating Committee (PCC). 984.202 Section 984.202 Housing and Urban Development Regulations Relating to Housing and Urban...

75 FR 39020 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

... Policy Experts, and State-level Coordinators.. Discussion Guide for use with Program Directors 25 1 2.5... other study activities, ACF seeks to identify the types of strategies that should be tested within the..., coordinators (e.g. state-level coordinators), subsidized and transitional employment program directors and...

76 FR 31272 - Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... Permanent Certification Program for Health Information Technology; Revisions to ONC-Approved Accreditor Processes AGENCY: Office of the National Coordinator for Health Information Technology (ONC), Department of... Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public...

34 CFR 673.6 - Coordination with BIA grants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EDUCATION, DEPARTMENT OF EDUCATION GENERAL PROVISIONS FOR THE FEDERAL PERKINS LOAN PROGRAM, FEDERAL WORK... Federal Perkins Loan, FWS, and FSEOG Programs § 673.6 Coordination with BIA grants. (a) Coordination of BIA grants with Federal Perkins loans, FWS awards, or FSEOGs. To determine the amount of a Federal...

34 CFR 673.6 - Coordination with BIA grants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION, DEPARTMENT OF EDUCATION GENERAL PROVISIONS FOR THE FEDERAL PERKINS LOAN PROGRAM, FEDERAL WORK... Federal Perkins Loan, FWS, and FSEOG Programs § 673.6 Coordination with BIA grants. (a) Coordination of BIA grants with Federal Perkins loans, FWS awards, or FSEOGs. To determine the amount of a Federal...

The microcomputer scientific software series 7: data recorder program for storing plant lists and calculating synecological coordinates.

Treesearch

Kevin Nimerfro; Gary Brand

1993-01-01

Describes a computer program designed for data recorders that stores plant lists and computes synecological coordinates from the stored list. The method of synecological coordinates uses plant species present on a site to quantify the site`s environmental factors.

The Influence of Setting on Care Coordination for Childhood Asthma.

PubMed

Kelly, R Patrick; Stoll, Shelley C; Bryant-Stephens, Tyra; Janevic, Mary R; Lara, Marielena; Ohadike, Yvonne U; Persky, Victoria; Ramos-Valencia, Gilberto; Uyeda, Kimberly; Malveaux, Floyd J

2015-11-01

Asthma affects 7.1 million children in the United States, disproportionately burdening African American and Latino children. Barriers to asthma control include insufficient patient education and fragmented care. Care coordination represents a compelling approach to improve quality of care and address disparities in asthma. The sites of The Merck Childhood Asthma Network Care Coordination Programs implemented different models of care coordination to suit specific settings-school district, clinic or health care system, and community-and organizational structures. A variety of qualitative data sources were analyzed to determine the role setting played in the manifestation of care coordination at each site. There were inherent strengths and challenges of implementing care coordination in each of the settings, and each site used unique strategies to deliver their programs. The relationship between the lead implementing unit and entities that provided (1) access to the priority population and (2) clinical services to program participants played a critical role in the structure of the programs. The level of support and infrastructure provided by these entities to the lead implementing unit influenced how participants were identified and how asthma care coordinators were integrated into the clinical care team. © 2015 Society for Public Health Education.

The Influence of Setting on Care Coordination for Childhood Asthma

PubMed Central

Kelly, R. Patrick; Stoll, Shelley C.; Bryant-Stephens, Tyra; Janevic, Mary R.; Lara, Marielena; Ohadike, Yvonne U.; Persky, Victoria; Ramos-Valencia, Gilberto; Uyeda, Kimberly; Malveaux, Floyd J.

2015-01-01

Asthma affects 7.1 million children in the United States, disproportionately burdening African American and Latino children. Barriers to asthma control include insufficient patient education and fragmented care. Care coordination represents a compelling approach to improve quality of care and address disparities in asthma. The sites of The Merck Childhood Asthma Network Care Coordination Programs implemented different models of care coordination to suit specific settings—school district, clinic or health care system, and community—and organizational structures. A variety of qualitative data sources were analyzed to determine the role setting played in the manifestation of care coordination at each site. There were inherent strengths and challenges of implementing care coordination in each of the settings, and each site used unique strategies to deliver their programs. The relationship between the lead implementing unit and entities that provided (1) access to the priority population and (2) clinical services to program participants played a critical role in the structure of the programs. The level of support and infrastructure provided by these entities to the lead implementing unit influenced how participants were identified and how asthma care coordinators were integrated into the clinical care team. PMID:26232778

40 CFR 130.12 - Coordination with other programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.12 Coordination with other programs. (a) Relationship... 208(e) of the Act, no NPDES permit may be issued which is in conflict with an approved Water Quality Management (WQM) plan. Where a State has assumed responsibility for the administration of the permit program...

Is the Infrastructure of EHDI Programs Working?

ERIC Educational Resources Information Center

Houston, K. Todd; Hoffman, Jeff; Munoz, Karen F.; Bradham, Tamala S.

2011-01-01

State coordinators of early hearing detection and intervention (EHDI) programs completed a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that consisted of 12 evaluative areas of EHDI programs. For the EHDI program infrastructure area, 47 coordinators responded with a total of 292 items, and themes were identified in each…

PERCEIVED FEASIBILITY OF ESTABLISHING DEDICATED ELDER ABUSE PROGRAMS OF CARE AT HOSPITAL-BASED SEXUAL ASSAULT/DOMESTIC VIOLENCE TREATMENT CENTETR.

PubMed

Du Mont, Janice; Mirzaei, Aftab; Macdonald, Sheila; White, Meghan; Kosa, Daisy; Reimer, Linda

2014-12-01

Elder abuse is an increasingly important issue that must be addressed in a systematic and coordinated way. Our objective was to evaluate the perceived feasibility of establishing an elder abuse care program at hospital-based sexual assault and domestic violence treatment centers in Ontario, Canada. In July 2012, a questionnaire focused on elder abuse care was distributed to all of Ontario's Sexual Assault/Domestic Violence Treatment Centre (SA/DVTC) Program Coordinators/Managers. We found that the majority of Program Coordinators/ Managers favored expansion of their program mandates to include an elder abuse care program. However, these respondents viewed collaboration with a large network of well trained professionals and available services in the community that address elder abuse as integral to responding in a coordinated manner. The expansion of health services to address the needs of abused older adults in a comprehensive and integrated manner should be considered as an important next step for hospital-based violence care programs worldwide.

Evaluation of the CAPE and CORE Programs for Sensory-Impaired Multi-Handicapped Children in the Province of Alberta. Final Report.

ERIC Educational Resources Information Center

Rutland Consulting Group Ltd.

The report presents summaries of evaluations of the Coordinated Assessment and Program Planning for Education (CAPE) Program and the Coordinated Rehabilitation and Education (CORE) program for multi-handicapped sensory impaired and/or communication and behavior disordered children and their families in Alberta, Canada. Each program is evaluated…

Using Generic Examples to Make Viable Arguments

ERIC Educational Resources Information Center

Adams, Anne E.; Ely, Rob; Yopp, David

2017-01-01

The twenty-first century has seen an increased call to train students to craft mathematical arguments. The third of the Common Core's (CCSS) Standards for Mathematical Practice (SMP 3) (CCSSI 2010) calls for all mathematically proficient students to "construct viable arguments" to support the truth of their ideas and to "critique…

Structurally Sound Statistics Instruction

ERIC Educational Resources Information Center

Casey, Stephanie A.; Bostic, Jonathan D.

2016-01-01

The Common Core's Standards for Mathematical Practice (SMP) call for all K-grade 12 students to develop expertise in the processes and proficiencies of doing mathematics. However, the Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) as a whole addresses students' learning of not only mathematics but also statistics. This situation…

Using Appropriate Tools Strategically for Instruction

ERIC Educational Resources Information Center

Sherman, Milan; Cayton, Charity

2015-01-01

Students' ability to use appropriate tools strategically is an important skill of mathematically proficient students (SMP 5, CCSSI 2010, p. 7). A parallel practice for teachers is using appropriate tools strategically for mathematics instruction. An important element of this practice is that the use of technology depends on the goals of…

Classroom Strategies to Make Sense and Persevere

ERIC Educational Resources Information Center

Wilburne, Jane M.; Wildmann, Tara; Morret, Michael; Stipanovic, Julie

2014-01-01

Three mid-level mathematics teachers (grades 7 and 8) and a university mathematics educator formed a year-long professional learning community. The objective was to collectively look at how they were promoting the Standards for Mathematical Practice (SMP) (CCSSI 2010) in their classes. The monthly discussions followed an iterative cycle in which…

SMP That Help Foster Algebraic Thinking

ERIC Educational Resources Information Center

Billings, Esther M. H.

2017-01-01

Arithmetic is a major mathematical focus in elementary school curriculum, and researchers such as Mason (2008) claim that "algebraic thinking is required in order to make sense of arithmetic" (p. 58). When adding, subtracting, multiplying, and dividing, learners must rely on a small set of fundamental properties also important for the…

28 CFR 552.41 - Program procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CUSTODY Suicide... Coordinator for the institution's suicide prevention program. (b) Training. The Program Coordinator is... for signs that the inmate is at risk for suicide. Ordinarily, this screening is to take place within...

28 CFR 552.41 - Program procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CUSTODY Suicide... Coordinator for the institution's suicide prevention program. (b) Training. The Program Coordinator is... for signs that the inmate is at risk for suicide. Ordinarily, this screening is to take place within...

28 CFR 552.41 - Program procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CUSTODY Suicide... Coordinator for the institution's suicide prevention program. (b) Training. The Program Coordinator is... for signs that the inmate is at risk for suicide. Ordinarily, this screening is to take place within...

28 CFR 552.41 - Program procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CUSTODY Suicide... Coordinator for the institution's suicide prevention program. (b) Training. The Program Coordinator is... for signs that the inmate is at risk for suicide. Ordinarily, this screening is to take place within...

28 CFR 552.41 - Program procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CUSTODY Suicide... Coordinator for the institution's suicide prevention program. (b) Training. The Program Coordinator is... for signs that the inmate is at risk for suicide. Ordinarily, this screening is to take place within...

24 CFR 570.206 - Program administrative costs.

Code of Federal Regulations, 2010 CFR

2010-04-01

....204, since those costs are eligible as part of such activities. (a) General management, oversight and coordination. Reasonable costs of overall program management, coordination, monitoring, and evaluation. Such.... (2) Travel costs incurred for official business in carrying out the program; (3) Administrative...

24 CFR 570.206 - Program administrative costs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... section for overall program management of: (1) A Federally designated Empowerment Zone or Enterprise....204, since those costs are eligible as part of such activities. (a) General management, oversight and coordination. Reasonable costs of overall program management, coordination, monitoring, and evaluation. Such...

24 CFR 570.206 - Program administrative costs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... section for overall program management of: (1) A Federally designated Empowerment Zone or Enterprise....204, since those costs are eligible as part of such activities. (a) General management, oversight and coordination. Reasonable costs of overall program management, coordination, monitoring, and evaluation. Such...

24 CFR 570.206 - Program administrative costs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section for overall program management of: (1) A Federally designated Empowerment Zone or Enterprise....204, since those costs are eligible as part of such activities. (a) General management, oversight and coordination. Reasonable costs of overall program management, coordination, monitoring, and evaluation. Such...

Tailoring Programs for Better Fit. The Key to Coordination.

ERIC Educational Resources Information Center

Ferrero, Lee

1994-01-01

The most serious problem with the current work force preparation system is that many employment and training programs operate today to serve roughly the same people. Instead, these programs should be coordinated better to lower costs in the face of lowered funding. The General Accounting Office reports that about 125 federal programs do…

34 CFR 403.16 - What are the personnel requirements regarding coordination with programs for individuals of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... coordination with programs for individuals of limited English proficiency? 403.16 Section 403.16 Education... with programs for individuals of limited English proficiency? (a) A State desiring to participate in... individual responsible for administering programs for students of limited English proficiency to review all...

75 FR 54885 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... Researchers, Policy Experts, and State- level Coordinators Discussion Guide for Use with Program 25 1 2.5 63... subsidized and transitional employment programs. Through this information collection and other study....g. state-level coordinators), subsidized and transitional employment program directors and staffs...

Automotive Energy Efficiency Program - Presented Papers at the Contractors Coordination Meeting, January 15-17, 1975

DOT National Transportation Integrated Search

1975-06-01

This volume contains working papers presented at the Contractors Coordination Meeting of the Automotive Energy Efficiency Program held at the DOT Transportation Systems Center, January 15-17, 1975. This program is the Federal Government's major effor...

Automotive Energy Efficiency Program : Papers Presented at the Project Coordination Meeting, November 4-6, 1975

DOT National Transportation Integrated Search

1976-06-01

This volume contains working papers presented at the Contractors Coordination Meeting of the Automotive Energy Efficiency Program held at the DOT Transportation Systems Center, January 15-17, 1975. This program is the Federal Government's major effor...

Relational coordination promotes quality of chronic care delivery in Dutch disease-management programs.

PubMed

Cramm, Jane Murray; Nieboer, Anna Petra

2012-01-01

Previous studies have shown that relational coordination is positively associated with the delivery of hospital care, acute care, emergency care, trauma care, and nursing home care. The effect of relational coordination in primary care settings, such as disease-management programs, remains unknown. This study examined relational coordination between general practitioners and other professionals in disease-management programs and assessed the impact of relational coordination on the delivery of chronic illness care. Professionals (n = 188; response rate = 57%) in 19 disease-management programs located throughout the Netherlands completed surveys that assessed relational coordination and chronic care delivery. We used a cross-sectional study design. Our study demonstrated that the delivery of chronic illness care was positively related to relational coordination. We found positive relationships with community linkages (r = .210, p < .01), self-management support (r = .217, p < .01), decision support (r = .190, p < .01), delivery system design (r = .278, p < .001), and clinical information systems (r = .193, p < .01). Organization of the health delivery system was not significantly related to relational coordination. The regression analyses showed that even after controlling for all background variables, relational coordination still significantly affected chronic care delivery (β = .212, p ≤ .01). As expected, our findings showed a lower degree of relational coordination among general practitioners than between general practitioners and other core disease-management team members: practice nurses (M = 2.69 vs. 3.73; p < .001), dieticians (M = 2.69 vs. 3.07; p < .01), physical therapists (M = 2.69 vs. 3.06; p < .01), medical specialists (M = 2.69 vs. 3.16; p < .01), and nurse practitioners (M = 2.69 vs. 3.19; p < .001). The enhancement of relational coordination among core disease-management professionals with different disciplines is expected to improve chronic illness care delivery.

2014-2015 Partnership accomplishments report on joint activities: National Gap Analysis Program and LANDFIRE

USGS Publications Warehouse

Davidson, Anne; McKerrow, Alexa; Long, Don; Earnhardt, Todd

2015-01-01

The intended target audience for this document initially is management and project technical specialist and scientists involved in the Gap Analysis Program (GAP) and the Landscape Fire and Resource Management Planning Tools - (LANDFIRE) program to help communicate coordination activities to all involved parties. This document is also intended to give background information in other parts of the USGS and beyond, although some details given are relatively oriented to management of the respective programs. Because the Gap Analysis Program (GAP) and the Landscape Fire and Resource Management Planning Tools - LANDFIRE programs both rely on characterizations of land cover using similar scales and resolutions, the programs have been coordinating their work to improve scientific consistency and efficiency of production. Initial discussions and informal sharing of ideas and work began in 2008. Although this collaboration was fruitful, there was no formal process for reporting results, plans, or outstanding issues, nor was there any formally-defined coordinated management team that spanned the two programs. In 2012, leadership from the two programs agreed to strengthen the coordination of their respective work efforts. In 2013 the GAP and LANDFIRE programs developed an umbrella plan of objectives and components related to three mutual focus areas for the GAP and LANDFIRE collaboration for the years 2013 and 2014 (GAP/LANDFIRE 2013). The evolution of this partnership resulted in the drafting of an inter-program Memorandum of Understanding (MOU) in 2014. This MOU identified three coordination topics relevant to the two programs participating at this point in the MOU history: Vegetation mappingDisturbance classesFormal quality assessment

Disease Management, Case Management, Care Management, and Care Coordination: A Framework and a Brief Manual for Care Programs and Staff.

PubMed

Ahmed, Osman I

2016-01-01

With the changing landscape of health care delivery in the United States since the passage of the Patient Protection and Affordable Care Act in 2010, health care organizations have struggled to keep pace with the evolving paradigm, particularly as it pertains to population health management. New nomenclature emerged to describe components of the new environment, and familiar words were put to use in an entirely different context. This article proposes a working framework for activities performed in case management, disease management, care management, and care coordination. The author offers standard working definitions for some of the most frequently used words in the health care industry with the goal of increasing consistency for their use, especially in the backdrop of the Centers for Medicaid & Medicare Services offering a "chronic case management fee" to primary care providers for managing the sickest, high-cost Medicare patients. Health care organizations performing case management, care management, disease management, and care coordination. Road map for consistency among users, in reporting, comparison, and for success of care management/coordination programs. This article offers a working framework for disease managers, case and care managers, and care coordinators. It suggests standard definitions to use for disease management, case management, care management, and care coordination. Moreover, the use of clear terminology will facilitate comparing, contrasting, and evaluating all care programs and increase consistency. The article can improve understanding of care program components and success factors, estimate program value and effectiveness, heighten awareness of consumer engagement tools, recognize current state and challenges for care programs, understand the role of health information technology solutions in care programs, and use information and knowledge gained to assess and improve care programs to design the "next generation" of programs.

Coordinating and planning for human sexuality education.

PubMed

Jenkins, D M

1981-04-01

The coordinator provides parent education, teacher and staff inservice training, team-teaching experiences, student counseling and a broad range of support activities related to the wider community as well as to the schools involved. The need for a coordinator for programs may depend on size and/or diversity of the school population, professional readiness of teachers and types of programs to be implemented. Despite the advances made in the Pomona program, there continue to be such problems as occasional resistance from special interest groups, administrators and school staff, individual instructors' personal value conflicts, transitional nature of student population and turnover in teacher personnel. A coordinator for sexuality programs is certainly not a total remedy for such problems in all school districts; but as an essential element in the solution of those problems, he/she provides an approach which will help school districts in initiating and implementing programs with a greater degree of success.

Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling

NASA Astrophysics Data System (ADS)

Hu, G. F.; Damanpack, A. R.; Bodaghi, M.; Liao, W. H.

2017-12-01

The main objective of this paper is to introduce a 4D printing method to program shape memory polymers (SMPs) during fabrication process. Fused deposition modeling (FDM) as a filament-based printing method is employed to program SMPs during depositing the material. This method is implemented to fabricate complicated polymeric structures by self-bending features without need of any post-programming. Experiments are conducted to demonstrate feasibility of one-dimensional (1D)-to 2D and 2D-to-3D self-bending. It is shown that 3D printed plate structures can transform into masonry-inspired 3D curved shell structures by simply heating. Good reliability of SMP programming during printing process is also demonstrated. A 3D macroscopic constitutive model is established to simulate thermo-mechanical features of the printed SMPs. Governing equations are also derived to simulate programming mechanism during printing process and shape change of self-bending structures. In this respect, a finite element formulation is developed considering von-Kármán geometric nonlinearity and solved by implementing iterative Newton-Raphson scheme. The accuracy of the computational approach is checked with experimental results. It is demonstrated that the theoretical model is able to replicate the main characteristics observed in the experiments. This research is likely to advance the state of the art FDM 4D printing, and provide pertinent results and computational tool that are instrumental in design of smart materials and structures with self-bending features.

Optimized multiple quantum MAS lineshape simulations in solid state NMR

NASA Astrophysics Data System (ADS)

Brouwer, William J.; Davis, Michael C.; Mueller, Karl T.

2009-10-01

The majority of nuclei available for study in solid state Nuclear Magnetic Resonance have half-integer spin I>1/2, with corresponding electric quadrupole moment. As such, they may couple with a surrounding electric field gradient. This effect introduces anisotropic line broadening to spectra, arising from distinct chemical species within polycrystalline solids. In Multiple Quantum Magic Angle Spinning (MQMAS) experiments, a second frequency dimension is created, devoid of quadrupolar anisotropy. As a result, the center of gravity of peaks in the high resolution dimension is a function of isotropic second order quadrupole and chemical shift alone. However, for complex materials, these parameters take on a stochastic nature due in turn to structural and chemical disorder. Lineshapes may still overlap in the isotropic dimension, complicating the task of assignment and interpretation. A distributed computational approach is presented here which permits simulation of the two-dimensional MQMAS spectrum, generated by random variates from model distributions of isotropic chemical and quadrupole shifts. Owing to the non-convex nature of the residual sum of squares (RSS) function between experimental and simulated spectra, simulated annealing is used to optimize the simulation parameters. In this manner, local chemical environments for disordered materials may be characterized, and via a re-sampling approach, error estimates for parameters produced. Program summaryProgram title: mqmasOPT Catalogue identifier: AEEC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEC_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3650 No. of bytes in distributed program, including test data, etc.: 73 853 Distribution format: tar.gz Programming language: C, OCTAVE Computer: UNIX/Linux Operating system: UNIX/Linux Has the code been vectorised or parallelized?: Yes RAM: Example: (1597 powder angles) × (200 Samples) × (81 F2 frequency pts) × (31 F1 frequency points) = 3.5M, SMP AMD opteron Classification: 2.3 External routines: OCTAVE ( http://www.gnu.org/software/octave/), GNU Scientific Library ( http://www.gnu.org/software/gsl/), OPENMP ( http://openmp.org/wp/) Nature of problem: The optimal simulation and modeling of multiple quantum magic angle spinning NMR spectra, for general systems, especially those with mild to significant disorder. The approach outlined and implemented in C and OCTAVE also produces model parameter error estimates. Solution method: A model for each distinct chemical site is first proposed, for the individual contribution of crystallite orientations to the spectrum. This model is averaged over all powder angles [1], as well as the (stochastic) parameters; isotropic chemical shift and quadrupole coupling constant. The latter is accomplished via sampling from a bi-variate Gaussian distribution, using the Box-Muller algorithm to transform Sobol (quasi) random numbers [2]. A simulated annealing optimization is performed, and finally the non-linear jackknife [3] is applied in developing model parameter error estimates. Additional comments: The distribution contains a script, mqmasOpt.m, which runs in the OCTAVE language workspace. Running time: Example: (1597 powder angles) × (200 Samples) × (81 F2 frequency pts) × (31 F1 frequency points) = 58.35 seconds, SMP AMD opteron. References:S.K. Zaremba, Annali di Matematica Pura ed Applicata 73 (1966) 293. H. Niederreiter, Random Number Generation and Quasi-Monte Carlo Methods, SIAM, 1992. T. Fox, D. Hinkley, K. Larntz, Technometrics 22 (1980) 29.

Survey of the Child Neurology Program Coordinator Association: Workforce Issues and Readiness for the Next Accreditation System.

PubMed

Feist, Terri B; Campbell, Julia L; LaBare, Julie A; Gilbert, Donald L

2016-03-01

In preparation for the implementation of the Next Accreditation System in Child Neurology, the authors organized the first meeting of child neurology program coordinators in October 2014. A workforce and program-readiness survey was conducted initially. Coordinator job titles varied widely. Most respondents (65%) managed 1 or more fellowships plus child neurology residency. Most had worked in graduate medical education less than 5 years (53%), with no career path (88%), supervised by someone without graduate medical education experience (85%), in divisions where faculty knowledge was judged inadequate (72%). A small proportion of programs had established clinical competency committee policies (28%) and was ready to implement milestone-based evaluations (56%). A post-conference survey demonstrated substantial improvements in relevant skills. The complexity of residency program management in the Next Accreditation System era supports substantive modifications to the program coordinator role. Such changes should include defined career pathway, managerial classification, administrative support, and continuing education. © The Author(s) 2015.

45 CFR 155.345 - Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Coordination with Medicaid, CHIP, the Basic Health....345 Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition..., CHIP, and the BHP as are necessary to fulfill the requirements of this subpart and provide copies of...

Pre-Employment Laboratory Training. A Guide for Coordinated Vocational-Academic Education Shop and Laboratory Instructors. Revised.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This guide is designed to serve as a reference for both beginning and experienced teachers in a preemployment laboratory that is part of a coordinated vocational-academic education program. Addressed in the individual sections of the guide are the following topics: student eligibility and approved coordinated vocational-academic programs, safety…

Obtaining Training Stations. Module Number 3. Work Experience Program Modules. Coordination Techniques Series.

ERIC Educational Resources Information Center

Schmalle, Bonnie

This self-instructional module, one of 16 on techniques for coordinating work experience programs, provides preservice and inservice educational materials for teacher-coordinators supervising on the job training. The three goals stated for this module are (1) to know the types of information needed to obtain an appropriate training station, (2) to…

A computer program for converting rectangular coordinates to latitude-longitude coordinates

USGS Publications Warehouse

Rutledge, A.T.

1989-01-01

A computer program was developed for converting the coordinates of any rectangular grid on a map to coordinates on a grid that is parallel to lines of equal latitude and longitude. Using this program in conjunction with groundwater flow models, the user can extract data and results from models with varying grid orientations and place these data into grid structure that is oriented parallel to lines of equal latitude and longitude. All cells in the rectangular grid must have equal dimensions, and all cells in the latitude-longitude grid measure one minute by one minute. This program is applicable if the map used shows lines of equal latitude as arcs and lines of equal longitude as straight lines and assumes that the Earth 's surface can be approximated as a sphere. The program user enters the row number , column number, and latitude and longitude of the midpoint of the cell for three test cells on the rectangular grid. The latitude and longitude of boundaries of the rectangular grid also are entered. By solving sets of simultaneous linear equations, the program calculates coefficients that are used for making the conversion. As an option in the program, the user may build a groundwater model file based on a grid that is parallel to lines of equal latitude and longitude. The program reads a data file based on the rectangular coordinates and automatically forms the new data file. (USGS)

A three-dimensional potential-flow program with a geometry package for input data generation

NASA Technical Reports Server (NTRS)

Halsey, N. D.

1978-01-01

Information needed to run a computer program for the calculation of the potential flow about arbitrary three dimensional lifting configurations is presented. The program contains a geometry package which greatly reduces the task of preparing the input data. Starting from a very sparse set of coordinate data, the program automatically augments and redistributes the coordinates, calculates curves of intersection between components, and redistributes coordinates in the regions adjacent to the intersection curves in a suitable manner for use in the potential flow calculations. A brief summary of the program capabilities and options is given, as well as detailed instructions for the data input, a suggested structure for the program overlay, and the output for two test cases.

Funding and Administrative Coordination of the Baja Field Studies Program at Glendale Community College during the Years 1974 to 1983: A Historical Investigation.

ERIC Educational Resources Information Center

Mercade, Jose A.

Glendale Community College's (GCC's) Baja Field Studies Program began in 1974 as a faculty-initiated overseas field program in marine biology and developed into a college-wide, interdisciplinary program offering different courses under the leadership of a program coordinator. As changes in funding and administration took place due to the altered…

40 CFR 130.12 - Coordination with other programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

....12 Section 130.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.12 Coordination with other programs. (a) Relationship... 208(e) of the Act, no NPDES permit may be issued which is in conflict with an approved Water Quality...

Alabama Commission on Higher Education 1986 Annual Report.

ERIC Educational Resources Information Center

Alabama State Commission on Higher Education, Montgomery.

The 1986 annual report outlines planning and coordination activities and student financial aid programs. The following planning and coordination activities are considered: statewide planning and facilities planning, a new program approval procedure, approval of off-campus offerings, studies of the state's engineering programs and needs and allied…

Interdisciplinary Collaboration in EHDI Programs

ERIC Educational Resources Information Center

Nelson, Lauri; Houston, K. Todd; Hoffman, Jeff; Bradham, Tamala S.

2011-01-01

State coordinators of early hearing detection and intervention (EHDI) programs were asked to complete a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that consisted of 12 evaluative areas of EHDI programs. For the interdisciplinary area, 47 coordinators responded with 224 items, and themes were identified within each SWOT…

Section 619 Profile, 19th Edition

ERIC Educational Resources Information Center

Lazara, A., Ed.; Danaher, J., Ed.; Kraus, R., Ed.; Goode, S., Ed.; Hipps, C., Ed.; Festa, C., Ed.

2012-01-01

This 2012 edition of this publication updates information provided by state coordinators on state policies, programs, and practices under the Preschool Grants Program (Section 619 of Part B) of the Individuals with Disabilities Education Act (IDEA). Information includes: (1) program administration; (2) funding; (3) interagency coordination; (4)…

Return of the Tug-of-War

ERIC Educational Resources Information Center

McNamara, Julie

2017-01-01

Long before the release of the Common Core State Standards (CCSSI 2010), the Mathematical Tug-of-War was engaging students in the type of reasoning and problem solving described by the Standards for Mathematical Practice (SMP). In this updated version of a Marilyn Burns task, students use algebraic reasoning to determine the outcome of a contest…

Leaning on Mathematical Habits of Mind

ERIC Educational Resources Information Center

Sword, Sarah; Matsuura, Ryota; Cuoco, Al; Kang, Jane; Gates, Miriam

2018-01-01

Mathematical modeling has taken on increasing curricular importance in the past decade due in no small measure to the Common Core State Standards in Mathematics (CCSSM) identifying modeling as one of the Standards for Mathematical Practice (SMP 4, CCSSI 2010, p. 7). Although researchers have worked on mathematical modeling (Lesh and Doerr 2003;…

Effect of three extraction techniques on submitochondrial particle and Microtox bioassays for airborne particulate matter.

PubMed

Torres-Pérez, Mónica I; Jiménez-Velez, Braulio D; Mansilla-Rivera, Imar; Rodríguez-Sierra, Carlos J

2005-03-01

The effect that three extraction techniques (e.g., Soxhlet, ultrasound and microwave-assisted extraction) have on the toxicity, as measured by submitochondrial particle (SMP) and Microtox assays, of organic extracts was compared from three sources of airborne particulate matter (APM). The extraction technique influenced the toxicity response of APM extracts and it was dependent on the bioassay method, and APM sample source. APM extracts from microwave-assisted extraction (MAE) were similar or more toxic than the conventional extraction techniques of Soxhlet and ultrasound, thus, providing an alternate extraction method. The microwave extraction technique has the advantage of using less solvent volume, less extraction time, and the capacity to simultaneously extract twelve samples. The ordering of APM toxicity was generally urban dust > diesel dust > PM10 (particles with diameter < 10 microm), thus, reflecting different chemical composition of the samples. This study is the first to report the suitability of two standard in-vitro bioassays for the future toxicological characterization of APM collected from Puerto Rico, with the SMP generally showing better sensitivity to the well-known Microtox bioassay.

Asparagus stem as a new lignocellulosic biomass feedstock for anaerobic digestion: increasing hydrolysis rate, methane production and biodegradability by alkaline pretreatment.

PubMed

Chen, Xiaohua; Gu, Yu; Zhou, Xuefei; Zhang, Yalei

2014-07-01

Recently, anaerobic digestion of lignocellulosic biomass for methane production has attracted considerable attention. However, there is little information regarding methane production from asparagus stem, a typical lignocellulosic biomass, by anaerobic digestion. In this study, alkaline pretreatment of asparagus stem was investigated for its ability to increase hydrolysis rate and methane production and to improve biodegradability (BD). The hydrolysis rate increased with increasing NaOH dose, due to higher removal rates of lignin and hemicelluloses. However, the optimal NaOH dose was 6% (w/w) according to the specific methane production (SMP). Under this condition, the SMP and the technical digestion time of the NaOH-treated asparagus stem were 242.3 mL/g VS and 18 days, which were 38.4% higher and 51.4% shorter than those of the untreated sample, respectively. The BD was improved from 40.1% to 55.4%. These results indicate that alkaline pretreatment could be an efficient method for increasing methane production from asparagus stem. Copyright © 2014 Elsevier Ltd. All rights reserved.

Characterizing fluorescent dissolved organic matter in a membrane bioreactor via excitation-emission matrix combined with parallel factor analysis.

PubMed

Maqbool, Tahir; Quang, Viet Ly; Cho, Jinwoo; Hur, Jin

2016-06-01

In this study, we successfully tracked the dynamic changes in different constitutes of bound extracellular polymeric substances (bEPS), soluble microbial products (SMP), and permeate during the operation of bench scale membrane bioreactors (MBRs) via fluorescence excitation-emission matrix (EEM) combined with parallel factor analysis (PARAFAC). Three fluorescent groups were identified, including two protein-like (tryptophan-like C1 and tyrosine-like C2) and one microbial humic-like components (C3). In bEPS, protein-like components were consistently more dominant than C3 during the MBR operation, while their relative abundance in SMP depended on aeration intensities. C1 of bEPS exhibited a linear correlation (R(2)=0.738; p<0.01) with bEPS amounts in sludge, and C2 was closely related to the stability of sludge. The protein-like components were more greatly responsible for membrane fouling. Our study suggests that EEM-PARAFAC can be a promising monitoring tool to provide further insight into process evaluation and membrane fouling during MBR operation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Covalent immobilization of lipase onto aminopropyl-functionalized hydroxyapatite-encapsulated-γ-Fe2O3 nanoparticles: A magnetic biocatalyst for interesterification of soybean oil.

PubMed

Xie, Wenlei; Zang, Xuezhen

2017-07-15

Hydroxyapatite-encapsulated γ-Fe 2 O 3 nanoparticles were prepared, and lipase from Candida rugosa was then covalently bound onto the magnetic materials via covalent linkages. The magnetic carrier and immobilized lipase were characterized by enzyme activity assays, XRD, FT-IR, TEM, VSM and N 2 adsorption-desorption techniques. Results demonstrated that γ-Fe 2 O 3 nanoparticles were coated with the hydroxyapatite, and the lipase was indeed tethered to the magnetic carriers without damage to their structure. The immobilized lipase showed a strong magnetic responsiveness and displayed high catalytic activities towards the interesterification of soybean oil. The interesterified products were evaluated for their total fatty acid (FA) composition, slip melting point (SMP), iodine value, triacylglycerols (TAGs) profile and FA composition at sn-2 position in TAGs. The FA positional distributions and TAG species significantly changed after the enzymatic interesterification. Besides this, the interesterified products showed an obvious reduction in their SMP in comparison with the physical blends. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effect of hydraulic retention time on the performance and fouling characteristics of membrane sequencing batch reactors used for the treatment of synthetic petroleum refinery wastewater.

PubMed

Shariati, Seyed Ramin Pajoum; Bonakdarpour, Babak; Zare, Nasim; Ashtiani, Farzin Zokaee

2011-09-01

The use of membrane sequencing batch reactors, operated at HRT of 8, 16 and 24h, was considered for the treatment of a synthetic petroleum wastewater. Increase in HRT resulted in statistically significant decrease in MLSS. Removal efficiencies higher than 97% were found for the three model hydrocarbon pollutants at all HRTs, with air stripping making a small contribution to overall removal. Particle size distribution (PSD) and microscopic analysis showed reduction in the protozoan populations in the activated sludge with decreasing HRT. PSD analysis also showed a higher proportion of larger and smaller sized particles at the lowest HRT. The rate of membrane fouling was found to increase with decreasing HRT; SMP, especially carbohydrate SMP, and mixed liquor apparent viscosity also showed a pronounced increase with decreasing HRT, whereas the concentration of EPS and its components decreased. FTIR analysis identified organic compounds as the main component of membrane pore fouling. Copyright © 2011 Elsevier Ltd. All rights reserved.

Characterization of soluble microbial products as precursors of disinfection byproducts in drinking water supply.

PubMed

Liu, Jin-Lin; Li, Xiao-Yan; Xie, Yue-Feng; Tang, Hao

2014-02-15

Water pollution by wastewater discharge can cause the problem of disinfection byproducts (DBPs) in drinking water supply. In this study, DBP formation characteristics of soluble microbial products (SMPs) as the main products of wastewater organic biodegradation were investigated. The results show that SMPs can act as DBP precursors in simulated wastewater biodegradation process. Under the experimental conditions, stabilized SMPs had DBPFP (DBP formation potential) yield of around 5.6 μmol mmol(-1)-DOC (dissolved organic carbon) and DBP speciation profile different from that of the conventional precursor, natural organic matter (NOM). SMPs contained polysaccharides, proteins, and humic-like substances, and the latter two groups can act as reactive DBP precursors. SMP fraction with molecular weight of <1 kDa accounted for 85% of the organic carbon and 65% of the DBP formation. As small SMP molecules are more difficult to remove by conventional water treatment processes, more efforts are needed to control wastewater-derived DBP problem in water resource management. Copyright © 2013 Elsevier B.V. All rights reserved.

A hybrid parallel framework for the cellular Potts model simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Yi; He, Kejing; Dong, Shoubin

2009-01-01

The Cellular Potts Model (CPM) has been widely used for biological simulations. However, most current implementations are either sequential or approximated, which can't be used for large scale complex 3D simulation. In this paper we present a hybrid parallel framework for CPM simulations. The time-consuming POE solving, cell division, and cell reaction operation are distributed to clusters using the Message Passing Interface (MPI). The Monte Carlo lattice update is parallelized on shared-memory SMP system using OpenMP. Because the Monte Carlo lattice update is much faster than the POE solving and SMP systems are more and more common, this hybrid approachmore » achieves good performance and high accuracy at the same time. Based on the parallel Cellular Potts Model, we studied the avascular tumor growth using a multiscale model. The application and performance analysis show that the hybrid parallel framework is quite efficient. The hybrid parallel CPM can be used for the large scale simulation ({approx}10{sup 8} sites) of complex collective behavior of numerous cells ({approx}10{sup 6}).« less

Modeling microbial products in activated sludge under feast-famine conditions.

PubMed

Ni, Bing-Jie; Fang, Fang; Rittmann, Bruce E; Yu, Han-Qing

2009-04-01

We develop an expanded unified model that integrates production and consumption of internal storage products (X(STO)) into a unified model for extracellular polymeric substances (EPS), soluble microbial products (SMP), and active and inert biomass in activated sludge. We also conducted independent experiments to find needed parameter values and to test the ability of the expanded unified model to describe all the microbial products, along with original substrate and oxygen uptake. The model simulations match all experimental measurements and provide insights into the dynamics of soluble and solid components in activated sludge exposed to dynamic feast-and-famine conditions in two batch experiments and in one cycle of a sequencing batch reactor. In particular, the model illustrates how X(STO) cycles up and down rapidly during feast and famine periods, while EPS and biomass components are relatively stable despite feast and famine. The agreement between model outputs and experimental EPS, SMP, and X(STO) data from distinctly different experiments supports that the expanded unified model properly captures the relationships among the forms of microbial products.

Investigation on the response of anaerobic membrane bioreactor to temperature decrease from 25°C to 10°C in sewage treatment.

PubMed

Watanabe, Ryoya; Nie, Yulun; Wakahara, Shinichiro; Komori, Daisuke; Li, Yu-You

2017-11-01

Anaerobic membrane bioreactor (AnMBR) for sewage treatment was operated for 650days with the decrease of temperature from 25°C to 10°C. At higher temperature >15°C, COD removal was above 94% while sewage treatment efficiency and relevant CH 4 production decreased below 15°C. The effluent COD at 10°C was 134mg/L at HRT of 16h. Moreover, low temperature can result in a higher membrane fouling rate due to the microbial self-protection behavior in coping with the temperature decrease by releasing soluble microbial products (SMP) and extracellular polymeric substances (EPS). The contribution of pore blocking to membrane fouling caused by protein from SMP and EPS increased from 17% to 45% and that of cake layer decreased from 81% to 53% at 25°C and 15°C respectively. The inhibition to hydrolysis and acidification process was responsible to the decrease of sewage treatment at lower temperature. Copyright © 2017 Elsevier Ltd. All rights reserved.

Shape memory polymeric composites sensing by optic fibre Bragg gratings: A very first approach

NASA Astrophysics Data System (ADS)

Quadrini, Fabrizio; Santo, Loredana; Ciminello, Monica; Concilio, Antonio; Volponi, Ruggero; Spena, Paola

2016-05-01

Shape memory polymer composites (SMPCs) have the potential for many applications in aerospace, spanning from self-repairing of structures to self-deploying of antennas, solar sails, or functional devices (e.g. for grabbing small space debris). In all these cases, it may be essential to have information about their configuration at different stages of shape recovery. In this study, the strain history of a prepreg carbon fibre system, cured with a shape memory polymer (SMP) interlayer, is monitored through a Fibre Bragg Grating (FBG), a fibre optic sensor device. SMPC has been manufactured by using traditional technologies for aerospace. After manufacturing cylindrical shape samples, an external fibre optic system is added to the composite structure; this system is especially suited for high temperatures which are necessary for SMP recovery and composite softening. Sensor functionality is checked before and after each strain history path. Optic fibre arrangement is optimized to avoid unwanted breakings whereas strains are limited by fibre collapsing, i.e. within nominal 2% of deformation. Dynamic information about shape recovery gives fundamental insights about strain evolution during time as well as its spatial distribution.

Reflexive aerostructures: increased vehicle survivability

NASA Astrophysics Data System (ADS)

Margraf, Thomas W.; Hemmelgarn, Christopher D.; Barnell, Thomas J.; Franklin, Mark A.

2007-04-01

Aerospace systems stand to benefit significantly from the advancement of reflexive aerostructure technologies for increased vehicle survivability. Cornerstone Research Group Inc. (CRG) is developing lightweight, healable composite systems for use as primary load-bearing aircraft components. The reflexive system is comprised of piezoelectric structural health monitoring systems, localized thermal activation systems, and lightweight, healable composite structures. The reflexive system is designed to mimic the involuntary human response to damage. Upon impact, the structural health monitoring system will identify the location and magnitude of the damage, sending a signal to a discrete thermal activation control system to resistively heat the shape memory polymer (SMP) matrix composite above activation temperature, resulting in localized shape recovery and healing of the damaged areas. CRG has demonstrated SMP composites that can recover 90 percent of flexural yield stress and modulus after postfailure healing. During the development, CRG has overcome issues of discrete activation, structural health monitoring integration, and healable resin systems. This paper will address the challenges associated with development of a reflexive aerostructure, including integration of structural health monitoring, discrete healing, and healable shape memory resin systems.

A Sparse Self-Consistent Field Algorithm and Its Parallel Implementation: Application to Density-Functional-Based Tight Binding.

PubMed

Scemama, Anthony; Renon, Nicolas; Rapacioli, Mathias

2014-06-10

We present an algorithm and its parallel implementation for solving a self-consistent problem as encountered in Hartree-Fock or density functional theory. The algorithm takes advantage of the sparsity of matrices through the use of local molecular orbitals. The implementation allows one to exploit efficiently modern symmetric multiprocessing (SMP) computer architectures. As a first application, the algorithm is used within the density-functional-based tight binding method, for which most of the computational time is spent in the linear algebra routines (diagonalization of the Fock/Kohn-Sham matrix). We show that with this algorithm (i) single point calculations on very large systems (millions of atoms) can be performed on large SMP machines, (ii) calculations involving intermediate size systems (1000-100 000 atoms) are also strongly accelerated and can run efficiently on standard servers, and (iii) the error on the total energy due to the use of a cutoff in the molecular orbital coefficients can be controlled such that it remains smaller than the SCF convergence criterion.

Effect of dairy powders fortification on yogurt textural and sensorial properties: a review.

PubMed

Karam, Marie Celeste; Gaiani, Claire; Hosri, Chadi; Burgain, Jennifer; Scher, Joël

2013-11-01

Yogurts are important dairy products that have known a rapid market growth over the past few decades. Industrial yogurt manufacture involves different processing steps. Among them, protein fortification of the milk base is elemental. It greatly enhances yogurt nutritional and functional properties and prevents syneresis, an undesirable yogurt textural defect. Protein enrichment can be achieved by either concentration process (evaporation under vacuum and membrane processing: reverse osmosis and/or ultrafiltration) or by addition of dairy ingredients. Traditionally, skim milk powder (SMP) is used to enrich the milk base before fermentation. However, increased quality and availability of other dairy ingredients such as milk protein isolates (MPI), milk protein concentrates (MPC) whey protein isolates (WPI) and concentrates (WPC), micellar casein (MC) and caseinates have promoted their use as alternatives to SMP. Substituting different dry ingredients for skim milk powder in yogurt making affects the yogurt mix protein composition and subsequent textural and sensorial properties. This review focuses on various type of milk protein used for fortification purposes and their influence on these properties.

Evaluation of uptake and effect on patient-reported outcomes of a clinician and patient co-led chronic musculoskeletal pain self-management programme provided by the UK National Health Service.

PubMed

Anderson, Joanna K; Wallace, Louise M

2018-05-01

In the United Kingdom, chronic pain affects approximately 28 million adults, creating significant healthcare and socio-economic costs. The aim was to establish whether a programme designed to use best evidence of content and delivery will be used by patients with significant musculoskeletal pain problems. Of 528 patients recruited, 376 participated in a 7-week-long group-based self-management programme (SMP) co-delivered by clinical and lay tutors. Of these, 308 patients (mean age, 53 years; 69% females, 94% White) completed at least five SMP sessions. Six months after pre-course assessment, participants reported significantly improved patient activation and health status, lower depression and anxiety scores, decreased pain severity and interference, and improved self-management skills. There were no improvements in health state and pain self-efficacy. Uptake rate was 71% and completion 82%. The results should be of value to commissioners of pathways of care for the large numbers of patients attending the English NHS for chronic musculoskeletal pain.

77 FR 71169 - Smart Grid Advisory Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-29

... cybersecurity coordination and the NIST Smart Grid Program Plan. The agenda may change to accommodate Committee... receive presentations on cybersecurity coordination and the NIST Smart Grid Program Plan. The agenda may...

Emigration of Natural and Hatchery Chinook Salmon and Steelhead Smolts from the Imnaha River, Oregon, 1998-1999 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleary, Peter J.; Blenden, Michael L.; Kucera, Paul A.

2002-08-01

This report summarizes the results of the Lower Snake River Compensation Plan Hatchery Evaluation Studies (LSRCP) and the Imnaha Smolt Monitoring Program (SMP) for the 1999 smolt migration from the Imnaha River, Oregon. These studies were designed and closely coordinated to provide information about juvenile natural and hatchery chinook salmon (Oncorhynchus tshawytscha) and steelhead (Oncorhynchus mykiss) biological characteristics, behavior and emigrant timing, survival, arrival timing and travel time to the Snake River dams and McNary Dam on the Columbia River. Data collected from these studies are shared with the Fish Passage Center (FPC). These data are essential to quantify smoltmore » survival rates under the current passage conditions and to evaluate the future recovery strategies that seek to optimize smolt survival through the hydroelectric system. Information shared with the FPC assists with in-season shaping of flow and spill management requests in the Snake River reservoirs. The Bonneville Power Administration and the United States Fish and Wildlife Service contracted the Nez Perce Tribe (NPT) to monitor emigration timing and tag 21,200 emigrating natural and hatchery chinook salmon and steelhead smolts from the Imnaha River during the spring emigration period (March 1-June 15) with passive integrated transponder (PIT) tags. The completion of trapping in the spring of 1999 marked the eighth year of emigration studies on the Imnaha River and the sixth year of participating in the FPC smolt monitoring program. Monitoring and evaluation objectives were to: (1) Determine spring emigration timing of chinook salmon and steelhead smolts collected at the Imnaha River trap. (2) Evaluate effects of flow, temperature and other environmental factors on emigration timing. (3) Monitor the daily catch and biological characteristics of juvenile chinook salmon and steelhead smolts collected at the Imnaha River screw trap. (4) Determine emigration timing, travel time, and in-river survival of PIT tagged hatchery chinook salmon smolts released at the Imnaha River acclimation facility to the Imnaha River Trap. (5) Determine arrival timing, travel time and estimated survival of PIT tagged hatchery and natural chinook salmon and natural and hatchery steelhead smolts from the Imnaha River to Snake and Columbia river dams.« less

45 CFR 155.345 - Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Coordination with Medicaid, CHIP, the Basic Health....345 Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition..., CHIP, and the BHP, if a BHP is operating in the service area of the Exchange, as are necessary to...

45 CFR 155.345 - Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Coordination with Medicaid, CHIP, the Basic Health....345 Coordination with Medicaid, CHIP, the Basic Health Program, and the Pre-existing Condition..., CHIP, and the BHP, if a BHP is operating in the service area of the Exchange, as are necessary to...

Loss to Follow-Up: Issues and Recommendations

ERIC Educational Resources Information Center

Hoffman, Jeff; Munoz, Karen F.; Bradham, Tamala S.; Nelson, Lauri

2011-01-01

State coordinators of early hearing detection and intervention (EHDI) programs completed a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that examined 12 areas within state EHDI programs. Related to how EHDI programs address loss to follow-up, 47 coordinators responded with 277 items, and themes were identified in each…

In-Home Respite Care Program Development. Background. Coordinator's Manual. Training Manual.

ERIC Educational Resources Information Center

Parham, J. D.; And Others

This volume consists of a background discussion, coordinator's manual, and training manual dealing with developing programs for the in-home respite care (IHRC) of the developmentally disabled. Addressed in the background information unit are the nature of developmental disabilities; program variables, planning, and funding; and practical…

Fostering Quality Improvement in EHDI Programs

ERIC Educational Resources Information Center

Bradham, Tamala S.; Hoffman, Jeff; Houston, K. Todd; Guignard, Gayla Hutsell

2011-01-01

State coordinators of early hearing detection and intervention (EHDI) programs completed a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that consisted of 12 evaluative areas of EHDI programs. For the quality improvement area, a total of 218 items were listed by 47 EHDI coordinators, and themes were identified in each…

Educating Homeless Children and Youth: A Sample of Programs, Policies and Procedures.

ERIC Educational Resources Information Center

McCall, Kathleen P.

This report reviews a variety of approaches for working with homeless students. Information was gathered from state Coordinators of Education for Homeless Children and Youth, regional coordinators of homeless programs, and national and local organizations. The programs described are organized into five categories. The first concerns educating…

Patterns of coordination and clinical outcomes: a study of surgical services.

PubMed Central

Young, G J; Charns, M P; Desai, K; Khuri, S F; Forbes, M G; Henderson, W; Daley, J

1998-01-01

OBJECTIVE: To test the hypothesis that surgical services combining relatively high levels of feedback and programming approaches to the coordination of surgical staff would have better quality of care than surgical services using low levels of both coordination approaches as well as those surgical service using low levels of either coordination approach. STUDY SETTING: A study sample of 44 academically affiliated surgical services that are part of the Department of Veterans Affairs. STUDY DESIGN: In a cross-sectional analysis, surgical services were assigned to one of three groups based on their scores on feedback and programming coordination measures: high on both measures; high on one measure, low on the other; and low on both. Univariate and multivariate analyses were used to assess differences among these groups with respect to three quality indicators: risk-adjusted mortality, risk-adjusted morbidity, and staff perceptions of quality. DATA COLLECTION/EXTRACTION METHODS: Risk-adjusted mortality and morbidity came from an outcomes reporting program within the Department of Veterans Affairs that entails the prospective collection of clinical data from patient charts. Data on coordination practices and perceived quality came from a survey of surgical staff at each of the 44 participating surgical services. PRINCIPAL FINDINGS: The group of surgical services using high feedback and high programming had the best perceived quality. This group also had the lowest morbidity, but the difference was statistically significant with respect to only one of the two other groups: the group with low feedback and low programming. No significant group differences were found for mortality. CONCLUSIONS: Study results provide partial support for the hypothesis that high levels of feedback and programming should be combined for optimal quality of care. Study results also suggest that staff coordination is more important for improving morbidity than mortality in surgical services. PMID:9865218

Perceived Benefits and Challenges of Coordinated Approaches to Chronic Disease Prevention in State Health Departments

PubMed Central

Sequeira, Sonia; Best, Leslie; Jones, Ellen; Baker, Elizabeth A.; Brownson, Ross C.

2014-01-01

Introduction Chronic disease prevention efforts have historically been funded categorically according to disease or risk factor. Federal agencies are now progressively starting to fund combined programs to address common risk. The purpose of this study was to inform transitions to coordinated chronic disease prevention by learning views on perceived benefits and challenges of a coordinated approach to funding. Methods A national survey on evidence-based public health was conducted from March through May 2013 among state health department employees working in chronic disease prevention (N = 865). Participants were asked to rank the top 3 benefits and top 3 challenges in coordinating chronic disease approaches from provided lists and could provide additional responses. Descriptive analyses, χ2 tests, and analysis of variance were conducted. Results The most common perceived benefits of coordinated approaches to chronic disease prevention were improved health outcomes, common risk factors better addressed, and reduced duplication of program efforts. The most common perceived challenges were funding restrictions, such as disease-specific performance measures; competing priorities; lack of communication across programs; funding might be reduced; agency not structured for program coordination; and loss of disease-specific partner support. Rankings of benefits and challenges were similar across states and participant roles; the perceived challenges “lack of communication across programs” (P = .02) and “funding might be reduced” differed by program area (P < .001). Conclusion Findings can be used by funding agencies and state health departments for planning, training, and technical assistance. The information on perceived challenges demonstrates the need to improve communication across programs, enhance organizational support for coordinated approaches, and create benefits for organizational partners. PMID:24809362

Acute sensitivity of three Cladoceran species to different types of microplastics in combination with thermal stress.

PubMed

Jaikumar, Gayathri; Baas, Jan; Brun, Nadja R; Vijver, Martina G; Bosker, Thijs

2018-08-01

Microplastics (<5 mm, MP) are ubiquitously distributed in the environment, causing increasing concern regarding their potential toxicity to organisms. To date, most research has focussed on the impacts of MPs on marine and estuarine organisms, with fewer studies focussing on the effects of microplastics on freshwater ecosystems, especially under different environmental conditions. In the present study, the sensitivity of two temperate Cladoceran species, Daphnia magna and Daphnia pulex, and a smaller tropical species Ceriodaphnia dubia, to primary microplastics (PMP) and secondary (weathered) microplastics (SMP) was assessed. A prolonged acute toxicity assay (up to 72 or 96 h) was performed at 18°, 22°, and 26 °C, to determine the influence of temperature as an additional stressor and survival data were analysed using toxicokinetic-toxicodynamic (TK-TD) model. Acute sensitivity of D. magna and D. pulex to both PMP and SMP increased sharply with temperature, whereas that of C. dubia remained relatively stable across temperatures. C. dubia was the most sensitive species at 18 °C, followed by D. pulex and D. magna, which were of comparable sensitivity. However, this ranking was reversed at 26 °C as could be seen from the No Effect Concentration (NEC) estimates of the TK-TD model. In addition, SMP and PMP had a similar effect on D. magna and D. pulex, but PMP was more toxic to C. dubia. Effects on survival were strongly time-dependent and became substantially more severe after the standard 48 h test period. Our results indicate that sensitivity to microplastics may differ between species for different types of microplastics, and could be drastically influenced by temperature albeit at high exposure concentrations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Functional characterization of a second pedal peptide/orcokinin-type neuropeptide signaling system in the starfish Asterias rubens.

PubMed

Lin, Ming; Egertová, Michaela; Zampronio, Cleidiane G; Jones, Alexandra M; Elphick, Maurice R

2018-04-01

Molluscan pedal peptides (PPs) and arthropod orcokinins (OKs) are prototypes of a family of neuropeptides that have been identified in several phyla. Recently, starfish myorelaxant peptide (SMP) was identified as a PP/OK-type neuropeptide in the starfish Patiria pectinifera (phylum Echinodermata). Furthermore, analysis of transcriptome sequence data from the starfish Asterias rubens revealed two PP/OK-type precursors: an SMP-type precursor (A. rubens PP-like neuropeptide precursor 1; ArPPLNP1) and a second precursor (ArPPLNP2). We reported previously a detailed analysis of ArPPLNP1 expression in A. rubens and here we report the first functional characterization ArPPLNP2-derived neuropeptides. Sequencing of a cDNA encoding ArPPLNP2 revealed that it comprises eleven related neuropeptides (ArPPLN2a-k), the structures of several of which were confirmed using mass spectrometry. Analysis of the expression of ArPPLNP2 and neuropeptides derived from this precursor using mRNA in situ hybridization and immunohistochemistry revealed a widespread distribution, including expression in radial nerve cords, circumoral nerve ring, digestive system, tube feet and innervation of interossicular muscles. In vitro pharmacology revealed that the ArPPLNP2-derived neuropeptide ArPPLN2h has no effect on the contractility of tube feet or the body wall-associated apical muscle, contrasting with the relaxing effect of ArPPLN1b (ArSMP) on these preparations. ArPPLN2h does, however, cause dose-dependent relaxation of cardiac stomach preparations, with greater potency/efficacy than ArPPLN1b and with similar potency/efficacy to the SALMFamide neuropeptide S2. In conclusion, there are similarities in the expression patterns of ArPPLNP1 and ArPPLNP2 but our data also indicate specialization in the roles of neuropeptides derived from these two PP/OK-type precursors in starfish. © 2017 The Authors The Journal of Comparative Neurology Published by Wiley Periodicals, Inc.

Pedal peptide/orcokinin-type neuropeptide signaling in a deuterostome: The anatomy and pharmacology of starfish myorelaxant peptide in Asterias rubens.

PubMed

Lin, Ming; Egertová, Michaela; Zampronio, Cleidiane G; Jones, Alexandra M; Elphick, Maurice R

2017-12-15

Pedal peptide (PP) and orcokinin (OK) are related neuropeptides that were discovered in protostomian invertebrates (mollusks, arthropods). However, analysis of genome/transcriptome sequence data has revealed that PP/OK-type neuropeptides also occur in a deuterostomian phylum-the echinoderms. Furthermore, a PP/OK-type neuropeptide (starfish myorelaxant peptide, SMP) was recently identified as a muscle relaxant in the starfish Patiria pectinifera. Here mass spectrometry was used to identify five neuropeptides (ArPPLN1a-e) derived from the SMP precursor (PP-like neuropeptide precursor 1; ArPPLNP1) in the starfish Asterias rubens. Analysis of the expression of ArPPLNP1 and neuropeptides derived from this precursor in A. rubens using mRNA in situ hybridization and immunohistochemistry revealed a widespread pattern of expression, with labeled cells and/or processes present in the radial nerve cords, circumoral nerve ring, digestive system (e.g., cardiac stomach) and body wall-associated muscles (e.g., apical muscle) and appendages (e.g., tube feet and papulae). Furthermore, our data provide the first evidence that neuropeptides are present in the lateral motor nerves and in nerve processes innervating interossicular muscles. In vitro pharmacological tests with SMP (ArPPLN1b) revealed that it causes dose-dependent relaxation of apical muscle, tube foot and cardiac stomach preparations from A. rubens. Collectively, these anatomical and pharmacological data indicate that neuropeptides derived from ArPPLNP1 act as inhibitory neuromuscular transmitters in starfish, which contrasts with the myoexcitatory actions of PP/OK-type neuropeptides in protostomian invertebrates. Thus, the divergence of deuterostomes and protostomes may have been accompanied by an inhibitory-excitatory transition in the roles of PP/OK-type neuropeptides as regulators of muscle activity. © 2017 The Authors The Journal of Comparative Neurology Published by Wiley Periodicals, Inc.

An Autonomous Sensor Tasking Approach for Large Scale Space Object Cataloging

NASA Astrophysics Data System (ADS)

Linares, R.; Furfaro, R.

The field of Space Situational Awareness (SSA) has progressed over the last few decades with new sensors coming online, the development of new approaches for making observations, and new algorithms for processing them. Although there has been success in the development of new approaches, a missing piece is the translation of SSA goals to sensors and resource allocation; otherwise known as the Sensor Management Problem (SMP). This work solves the SMP using an artificial intelligence approach called Deep Reinforcement Learning (DRL). Stable methods for training DRL approaches based on neural networks exist, but most of these approaches are not suitable for high dimensional systems. The Asynchronous Advantage Actor-Critic (A3C) method is a recently developed and effective approach for high dimensional systems, and this work leverages these results and applies this approach to decision making in SSA. The decision space for the SSA problems can be high dimensional, even for tasking of a single telescope. Since the number of SOs in space is relatively high, each sensor will have a large number of possible actions at a given time. Therefore, efficient DRL approaches are required when solving the SMP for SSA. This work develops a A3C based method for DRL applied to SSA sensor tasking. One of the key benefits of DRL approaches is the ability to handle high dimensional data. For example DRL methods have been applied to image processing for the autonomous car application. For example, a 256x256 RGB image has 196608 parameters (256*256*3=196608) which is very high dimensional, and deep learning approaches routinely take images like this as inputs. Therefore, when applied to the whole catalog the DRL approach offers the ability to solve this high dimensional problem. This work has the potential to, for the first time, solve the non-myopic sensor tasking problem for the whole SO catalog (over 22,000 objects) providing a truly revolutionary result.

Performance and membrane fouling of a step-fed submerged membrane sequencing batch reactor treating swine biogas digestion slurry.

PubMed

Han, Zhiying; Chen, Shixia; Lin, Xiaochang; Yu, Hongjun; Duan, Li'an; Ye, Zhangying; Jia, Yanbo; Zhu, Songming; Liu, Dezhao

2018-01-02

To identify the performance of step-fed submerged membrane sequencing batch reactor (SMSBR) treating swine biogas digestion slurry and to explore the correlation between microbial metabolites and membrane fouling within this novel reactor, a lab-scale step-fed SMSBR was operated under nitrogen loading rate of 0.026, 0.052 and 0.062 g NH 4 + -N (gVSS·d) -1 . Results show that the total removal efficiencies for NH 4 + -N, total nitrogen and chemical oxygen demand in the reactor (>94%, >89% and >97%, respectively) were high during the whole experiment. However, the cycle removal efficiency of NH 4 + -N decreased significantly when the nitrogen loading rate was increased to 0.062 g NH 4 + -N (gVSS·d) -1 . The total removal efficiency of total phosphorus in the step-fed SMSBR was generally higher than 75%, though large fluctuations were observed during the experiments. In addition, the concentrations of microbial metabolites, i.e., soluble microbial products (SMP) and extracellular polymeric substances (EPS) from activated sludge increased as nitrogen loading rate increased, both showing quadratic equation correlations with viscosity of the mixed liquid in the step-fed SMSBR (both R 2 > 0.90). EPS content was higher than SMP content, while protein (PN) was detected as the main component in both SMP and EPS. EPS PN was found to be well correlated with transmembrane pressure, membrane flux and the total membrane fouling resistance. Furthermore, the three-dimensional excitation-emission matrix fluorescence spectroscopy results suggested the tryptophan-like protein as one of the main contributors to the membrane fouling. Overall, this study showed that the step-fed SMSBR could be used to treat swine digestion slurry at nitrogen loading rate of 0.052 g NH 4 + -N (gVSS·d) -1 , and the control strategy of membrane fouling should be developed based on reducing the tryptophan-like PN in EPS.

The Clinical Validation of the Athlete Sleep Screening Questionnaire: an Instrument to Identify Athletes that Need Further Sleep Assessment.

PubMed

Bender, Amy M; Lawson, Doug; Werthner, Penny; Samuels, Charles H

2018-06-04

Previous research has established that general sleep screening questionnaires are not valid and reliable in an athlete population. The Athlete Sleep Screening Questionnaire (ASSQ) was developed to address this need. While the initial validation of the ASSQ has been established, the clinical validity of the ASSQ has yet to be determined. The main objective of the current study was to evaluate the clinical validity of the ASSQ. Canadian National Team athletes (N = 199; mean age 24.0 ± 4.2 years, 62% females; from 23 sports) completed the ASSQ. A subset of athletes (N = 46) were randomized to the clinical validation sub-study which required subjects to complete an ASSQ at times 2 and 3 and to have a clinical sleep interview by a sleep medicine physician (SMP) who rated each subjects' category of clinical sleep problem and provided recommendations to improve sleep. To assess clinical validity, the SMP category of clinical sleep problem was compared to the ASSQ. The internal consistency (Cronbach's alpha = 0.74) and test-retest reliability (r = 0.86) of the ASSQ were acceptable. The ASSQ demonstrated good agreement with the SMP (Cohen's kappa = 0.84) which yielded a diagnostic sensitivity of 81%, specificity of 93%, positive predictive value of 87%, and negative predictive value of 90%. There were 25.1% of athletes identified to have clinically relevant sleep disturbances that required further clinical sleep assessment. Sleep improved from time 1 at baseline to after the recommendations at time 3. Sleep screening athletes with the ASSQ provides a method of accurately determining which athletes would benefit from preventative measures and which athletes suffer from clinically significant sleep problems. The process of sleep screening athletes and providing recommendations improves sleep and offers a clinical intervention output that is simple and efficient for teams and athletes to implement.

Mercer County (N.J.) Coordination/Consolidation Demonstration Program

DOT National Transportation Integrated Search

1982-03-01

From November 1977 through June 1981, Mercer County in New Jersey, was the site of an Urban Mass Transportation Administration Service and Methods Demonstration, which coordinated human service agency transportation programs. The Mercer County Coordi...

76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...This final rule establishes a permanent certification program for the purpose of certifying health information technology (HIT). This final rule is issued pursuant to the authority granted to the National Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public Health Service Act (PHSA), as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act. The permanent certification program will eventually replace the temporary certification program that was previously established by a final rule. The National Coordinator will use the permanent certification program to authorize organizations to certify electronic health record (EHR) technology, such as Complete EHRs and/or EHR Modules. The permanent certification program could also be expanded to include the certification of other types of HIT.

A three-dimensional, compressible, laminar boundary-layer method for general fuselages. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Wie, Yong-Sun

1990-01-01

This user's manual contains a complete description of the computer programs developed to calculate three-dimensional, compressible, laminar boundary layers for perfect gas flow on general fuselage shapes. These programs include the 3-D boundary layer program (3DBLC), the body-oriented coordinate program (BCC), and the streamline coordinate program (SCC). Subroutine description, input, output and sample case are discussed. The complete FORTRAN listings of the computer programs are given.

Participant Retention in the Veterans Health Administration’s MOVE! Weight Management Program, 2010

PubMed Central

Sohn, Min-Woong; Spring, Bonnie; Hadi, Sattar; Weaver, Frances M.

2012-01-01

Introduction Participant retention is a frequent concern in structured weight-management programs. Although research has explored participant characteristics influencing retention, little attention has been given to the influence of program characteristics. The objective of this study was to examine how program characteristics relate to participant retention in the Veterans Health Administration’s weight-management program, MOVE! Methods We conducted semistructured interviews with coordinators of 12 MOVE! programs located throughout the United States, 5 with high participant retention rates and 7 with low rates. We transcribed and descriptively coded interviews and compared responses from high- and low-retention programs. Results Characteristics related to retention were provider knowledge of and referral to the program, reputation of the program within the medical facility, the MOVE! meeting schedule, inclusion of physical activity in group meetings, and involvement of the MOVE! physician champion. MOVE! introductory sessions, frequency of group meetings, and meeting topics were not related to retention. Coordinators described efforts to improve retention, including participant contracts and team competitions. Coordinators at 5 high-retention facilities and 1 low-retention facility discussed efforts to improve retention. Conclusion Coordinators identified important program characteristics that could guide improvements to retention in group-based weight-management programs. Training for providers is needed to assist with referral decisions, and program planners should consider incorporating physical activity in group meetings. PMID:22814235

78 FR 6806 - Forest Resource Coordinating Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-31

...: Maya Solomon, 1400 Independence Ave. SW., mailstop 1123, Washington, DC 20250 or by email to... CONTACT: Maya Solomon, Forest Resource Coordinating Committee Program Coordinator, Cooperative Forestry...

Wounded Warrior Regiment Strategic Plan 2011-2012

DTIC Science & Technology

2011-01-01

months later, the “Miracle Man”, as he had come to be known, walked out of the hospital under his own power. Sergeant German met his challenges...Coordination Program-Support Solution ( RCP -SS), Marine Corps Medical Entitlement Data System (MCMEDS), Comprehensive Health Care System (CHCS), and...PTS Post-Traumatic Stress RCC Recovery Care Coordinator RCP -SS Recovery Coordination Program-Support Solution RMED Reserve Medical Entitlements

Health Is Academic. A Guide to Coordinated School Health Programs.

ERIC Educational Resources Information Center

Marx, Eva, Ed.; Wooley, Susan Frelick, Ed.; Northrop, Daphne, Ed.

This book presents a collection of papers that define comprehensive school health programs and their components and provide action steps for their implementation at the local, state, and national levels: (1) "Linking Health and Learning: An Overview of Coordinated School Health Programs" (Floretta Dukes McKenzie and Julius B. Richmond); (2)…

Parenting Education: An Exemplary Program for Rural/Migrant Youth and Adults. Final Report.

ERIC Educational Resources Information Center

Baum, Rosemere; And Others

Designed for use in a parenting education course for rural/migrant youth and adults, this parenting education learning kit consists of a coordinator's manual and bilingual instructional materials for seven course sessions. Issues addressed in the coordinator's manual include program content, program format, orientation for experienced parents,…

Professional Development: Are We Meeting the Needs of State EHDI Programs?

ERIC Educational Resources Information Center

Houston, K. Todd; Munoz, Karen F.; Bradham, Tamala S.

2011-01-01

State coordinators of early hearing detection and intervention (EHDI) programs completed a strengths, weaknesses, opportunities, and threats, or SWOT, analysis that consisted of 12 evaluative areas of EHDI programs. For the professional development area, 47 coordinators responded with a total of 223 items, and themes were identified in each SWOT…

42 CFR 431.636 - Coordination of Medicaid with the Children's Health Insurance Program (CHIP).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Coordination of Medicaid with the Children's Health Insurance Program (CHIP). 431.636 Section 431.636 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES...'s Health Insurance Program (CHIP). (a) Statutory basis. This section implements— (1) Section 2102(b...

42 CFR 431.636 - Coordination of Medicaid with the Children's Health Insurance Program (CHIP).

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Coordination of Medicaid with the Children's Health Insurance Program (CHIP). 431.636 Section 431.636 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES...'s Health Insurance Program (CHIP). (a) Statutory basis. This section implements— (1) Section 2102(b...

Impact of Career Development Program Upon Local Coordinators. Final Report.

ERIC Educational Resources Information Center

Mulford, Charles L.; And Others

The general objective of this study was to investigate the effectiveness of the OCD Career Development Program. The specific objectives were to determine the program's impact on the local civil defense coordinator's knowledge of and ability to build and operate a viable local civil defense organization and to link the official (vertical) civil…

Building Local Infrastructure for Coordinated School Health Programs: A Pilot Study

ERIC Educational Resources Information Center

Stoltz, Ann D.; Coburn, Sheri; Knickelbein, Ann

2009-01-01

Coordinated school health programs (CSHPs) provide an organizational framework for school health practice by combining health education, health promotion, disease prevention, and access to health services in an integrated, systemic manner. This project examined the effects of a regional 2-year training program to increase local school districts'…

Post-Flight Estimation of Motion of Space Structures: Part 2

NASA Technical Reports Server (NTRS)

Brugarolas, Paul; Breckenridge, William

2008-01-01

A computer program related to the one described in the immediately preceding article estimates the relative position of two space structures that are hinged to each other. The input to the program consists of time-series data on distances, measured by two range finders at different positions on one structure, to a corner-cube retroreflector on the other structure. Given a Cartesian (x,y,z) coordinate system and the known x coordinate of the retroreflector relative to the y,z plane that contains the range finders, the program estimates the y and z coordinates of the retroreflector. The estimation process involves solving for the y,z coordinates of the intersection between (1) the y,z plane that contains the retroreflector and (2) spheres, centered on the range finders, having radii equal to the measured distances. In general, there are two such solutions and the program chooses the one consistent with the design of the structures. The program implements a Kalman filter. The output of the program is a time series of estimates of the relative position of the structures.

Workforce Investment Act: Coordination of TANF Services through One-Stops Has Increased Despite Challenges. Testimony before the Subcommittee on Employment, Safety, and Training, Committee on Health, Education, Labor, and Pensions, U.S. Senate. Statement of Sigurd R. Nilsen, Director, Education, Workforce, and Income Security Issues.

ERIC Educational Resources Information Center

Nilsen, Sigurd R.

Coordination between Temporary Assistance for Needy Families (TANF)-related programs and Workforce Investment Act of 1998 (WIA)'s one-stop centers increased since spring 2000, when WIA was first implemented. Nearly all states reported some coordination between the programs at either the state or the local level. Most often, coordination took one…

Difficulties with True Interoperability in Modeling & Simulation

DTIC Science & Technology

2011-12-01

2009. Programming Scala : Scalability = Functional Programming + Ob- jects. 1 st ed. O‟Reilly Media. 2652 Gallant and Gaughan AUTHOR BIOGRAPHIES...that develops a model or simulation has a specific purpose, set of requirements and limited funding. These programs cannot afford to coordinate with...implementation. The program offices should budget for and plan for coordination across domain projects within a limited scope to improve interoperability with

45 CFR 1310.23 - Coordinated transportation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false Coordinated transportation. 1310.23 Section 1310... START PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.23 Coordinated transportation. (a) Each agency providing transportation services must make reasonable efforts to coordinate transportation...

45 CFR 1310.23 - Coordinated transportation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false Coordinated transportation. 1310.23 Section 1310... START PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.23 Coordinated transportation. (a) Each agency providing transportation services must make reasonable efforts to coordinate transportation...

45 CFR 1310.23 - Coordinated transportation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false Coordinated transportation. 1310.23 Section 1310... START PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.23 Coordinated transportation. (a) Each agency providing transportation services must make reasonable efforts to coordinate transportation...

A Comparison between Learning Style Preferences and Sex, Status, and Course Performance

ERIC Educational Resources Information Center

Dobson, John L.

2010-01-01

Students have learning style preferences that are often classified according to their visual (V), aural (A), read-write (R), and/or kinesthetic (K) sensory modality preferences (SMP). The purposes of this investigation were to compare student perceived and assessed SMPs and examine the associations between those SMPs and status (i.e.,…

CCSSM: Examining the Critical Areas in Grades 5 and 6

ERIC Educational Resources Information Center

Polly, Drew; Orrill, Chandra

2012-01-01

Cognitively demanding tasks are at the heart of the implementation of the Common Core State Standards in Mathematics (CCSSI 2010). As with all the grades, teachers of grades 5 and 6 are challenged to use tasks that simultaneously address the grade-level Standards as well as the Standards for Mathematical Practice (SMP). Cognitively demanding tasks…

Classroom Interaction in Teaching English as Foreign Language at Lower Secondary Schools in Indonesia

ERIC Educational Resources Information Center

Sundari, Hanna

2017-01-01

The aim of this study was to develop a deep understanding of interaction in language classroom in foreign language context. Interviews, as major instrument, to twenty experienced English language teachers from eight lower secondary schools (SMP) were conducted in Jakarta, completed by focus group discussions and class observation/recordings. The…

Evaluation of a collective kitchens program: using the Population Health Promotion Model.

PubMed

Fano, Tara J; Tyminski, Sheila M; Flynn, Mary A T

2004-01-01

To evaluate the impact of the Calgary Health Region Collective Kitchen Program on various Population Health Promotion Model health determinants, data were collected through mail-in questionnaires that examined the members' (n=331) and coordinators' (n=58) perspectives of the program. Seventy-nine members (24%) and 26 coordinators (45%) were included in the study. Three incomplete questionnaires (from prenatal program members) were discarded. Sixty-one percent of members who reported income level and family size (n=61) had incomes below the low-income cut-off. Fifty-eight members (73%) reported improvements in their lives because of the program. Sixty-four members (81%) perceived they learned to feed their families healthier foods. The members reported their fruit and vegetable consumption before and since joining a collective kitchen, and the proportion of those consuming at least five fruit and vegetable servings a day rose from 29% to 47%. The most common reasons for joining this program concerned social interactions and support. Over 90% of the coordinators perceived that they were competent to coordinate a kitchen. The results indicate that the collective kitchens program addresses several health determinants, and may increase members' capacity to attain food security and to achieve improved nutritional health.

78 FR 57128 - Forest Resource Coordinating Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

... Solomon, Forest Resource Coordinating Committee Program Coordinator, Cooperative Forestry Staff, 202-205.... Written comments and requests for time for oral comments must be sent to Maya Solomon, Forest Resource...

14 CFR 1203.603 - Systematic review for declassification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... National Security Agency. (3) Systematic review for declassification of classified information pertaining... coordinated through the Central Intelligence Agency. (4) The Chairperson, NASA Information Security Program... guidelines. The Chairperson, NASA Information Security Program Committee, shall develop, in coordination with...

FAA's alleged unsatisfactory coordination and improper fund control of occupational safety and health programs

DOT National Transportation Integrated Search

1997-01-27

This report responds to a complaint received by the Office of Inspector : General (OIG), Department of Transportation, concerning unsatisfactory program coordination and budget control activities between the Federal Aviation Administration (FAA), Off...

Documentation of program COORDC to generate and coordinate system for 3D corners with or without fillet using body fitted curvilinear coordinates, part 2

NASA Technical Reports Server (NTRS)

Kumar, D.

1980-01-01

The computer program COORDC generates a body fitted curvilinear coordinate system for corner geometry with or without corner fillets. It is assumed that at any given xi, x remains constant; consequently the only variation is in y and z. It is also assumed that for all xi's in the physical plane the coordinate system in y-z plane is similar. This enables solution of coordinate system for one particular xi = 1 (x for xi = 1 is arbitrarily chosen to be 0.0) and the solution for all other xi plane can be easily specified once the coordinates in the physical plane on the line 1 or = to xi or = to IMAX, eta = 1, zeta = 1 are specified.

40 CFR 109.6 - Coordination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Coordination. 109.6 Section 109.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA FOR STATE, LOCAL AND REGIONAL OIL REMOVAL CONTINGENCY PLANS § 109.6 Coordination. For the purposes of coordination...

40 CFR 109.6 - Coordination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Coordination. 109.6 Section 109.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA FOR STATE, LOCAL AND REGIONAL OIL REMOVAL CONTINGENCY PLANS § 109.6 Coordination. For the purposes of coordination...

Coordinated Fuel Cell System Programs for Government and Commercial Applications: Are We in a New Era?

NASA Technical Reports Server (NTRS)

Warshay, Marvin; Prokopius, Paul

1996-01-01

Though the fuel cell was invented in 1839, it was not until the early 1960's that the fuel cell power system was developed and used for a real application, for the NASA Space Mission Gemini. Unfortunately, fuel cell power systems did not, as a result, become in widespread use. Nevertheless, a great deal of progress has been made by both government and industry, culminating in many successful fuel cell power system demonstrations. Initially, each government agency and each private organization went its own way. Later, it became evident that coordination among programs was essential. An overview is presented of the current coordinated efforts by government and industry in fuel cells, with a sufficient historical background. The primary barriers to coordination of programs were institutional and differing application requirements. Initially, in the institutional area, it was the energy crisis and the formation of DOE which fostered close working relationships among government, manufacturers, and users. The authors discuss the fuel cell power system programs (of NASA, DOE, DOT, DOC, EPRI, GRI, industry, and universities), including missions and applications, technology advances, and demonstrations. The discussion covers the new Solar Regenerative Fuel Cell (RFC) program which has space, defense, and commercial terrestrial applications, and which is an excellent example of both program coordination and the Clinton Administration's dual-use application policy.

38 CFR 17.242 - Coordination of programs with Department of Health and Human Services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... with Department of Health and Human Services. 17.242 Section 17.242 Pensions, Bonuses, and Veterans... § 17.242 Coordination of programs with Department of Health and Human Services. Programs for sharing... jurisdiction of the Department of Health and Human Services. [32 FR 6842, May 4, 1967, as amended at 45 FR 6940...

38 CFR 17.242 - Coordination of programs with Department of Health and Human Services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with Department of Health and Human Services. 17.242 Section 17.242 Pensions, Bonuses, and Veterans... § 17.242 Coordination of programs with Department of Health and Human Services. Programs for sharing... jurisdiction of the Department of Health and Human Services. [32 FR 6842, May 4, 1967, as amended at 45 FR 6940...

38 CFR 17.242 - Coordination of programs with Department of Health and Human Services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with Department of Health and Human Services. 17.242 Section 17.242 Pensions, Bonuses, and Veterans... § 17.242 Coordination of programs with Department of Health and Human Services. Programs for sharing... jurisdiction of the Department of Health and Human Services. [32 FR 6842, May 4, 1967, as amended at 45 FR 6940...

Coordination of Scheduling Clinical Externship or Clinical Practice Experiences for Students in Physical Therapy Educational Programs.

ERIC Educational Resources Information Center

Patterson, Robert K.; Kass, Susan H.

A project to coordinate the scheduling of allied health occupations students for clinical practice or externship experiences in Southeast Florida is described. A model clinical facility utilization and time schedule matrix was developed for four programs: the physical therapy programs at Florida International University (FIU) and the University of…

Developing a New System to Measure Outcomes in a Service Coordination Program for Youth with Severe Emotional Disturbance

ERIC Educational Resources Information Center

Shannon, Lisa M.; Walker, Robert; Blevins, Michele

2009-01-01

This paper presents information on re-developing an outcome evaluation for a state-funded program providing service coordination utilizing wraparound to youth with severe emotional disturbance (SED) and their families. Originally funded by the Robert Wood Johnson Foundation, the Kentucky IMPACT program has existed statewide since 1990. Changing…

78 FR 25291 - Announcement of Funding Awards; Section 3 Program Coordination and Implementation; Fiscal Year 2010

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-30

... funding under the Notice of Funding Availability (NOFA) for the Section 3 Program Coordination and.... (The Catalog of Federal Domestic Assistance Number for currently funded Initiatives under the Section 3... Valentine Reid, 816-777-2390. 7 50,000.00 East Armour Boulevard, Jackson, MO 64112-1254. Section 3 Program...

Workshop: Western hemisphere network of bird banding programs

USGS Publications Warehouse

Celis-Murillo, A.

2007-01-01

Purpose: To promote collaboration among banding programs in the Americas. Introduction: Bird banding and marking provide indispensable tools for ornithological research, management, and conservation of migratory birds on migratory routes, breeding and non-breeding grounds. Many countries and organizations in Latin America and the Caribbean are in the process of developing or have expressed interest in developing national banding schemes and databases to support their research and management programs. Coordination of developing and existing banding programs is essential for effective data management, reporting, archiving and security, and most importantly, for gaining a fuller understanding of migratory bird conservation issues and how the banding data can help. Currently, there is a well established bird-banding program in the U.S.A. and Canada, and programs in other countries are being developed as well. Ornithologists in many Latin American countries and the Caribbean are interested in using banding and marking in their research programs. Many in the ornithological community are interested in establishing banding schemes and some countries have recently initiated independent banding programs. With the number of long term collaborative and international initiatives increasing, the time is ripe to discuss and explore opportunities for international collaboration, coordination, and administration of bird banding programs in the Western Hemisphere. We propose the second ?Western Hemisphere Network of Bird Banding Programs? workshop, in association with the SCSCB, to be an essential step in the progress to strengthen international partnerships and support migratory bird conservation in the Americas and beyond. This will be the second multi-national meeting to promote collaboration among banding programs in the Americas (the first meeting was held in October 8-9, 2006 in La Mancha, Veracruz, Mexico). The Second ?Western Hemisphere Network of Bird Banding Programs? workshop will continue addressing issues surrounding the coordination of an Americas? approach to bird banding and will review in detail the advances made on the first workshop such as, coordination of bands and markers, coordination in recovery reporting, permit issues, data management and data sharing and archiving, data security, training, etc. Workshop Goals: Build on accomplishments of the network?s first workshop (Oct 8-9, 2006). Identify and explore new opportunities for data sharing, data archiving, data access, training, etc. Initiate strategies to support international collaboration and coordination amongst bird banding programs in the Western Hemisphere. Workshop structure: One day workshop of guided discussions. Participants: Representatives of government agencies, program managers and NGOs.

75 FR 38506 - Office of Postsecondary Education: Overview Information; Coordinating Center for Transition and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... to establish a coordinating center for institutions of higher education that offer inclusive... DEPARTMENT OF EDUCATION Office of Postsecondary Education: Overview Information; Coordinating... purpose of this program is to establish a coordinating center for institutions of higher education that...

Cooperative Education Coordinator's Handbook.

ERIC Educational Resources Information Center

Worley, Tom

Designed to serve as a guide for teacher-coordinators, counselors, administrators, and the employing community, this handbook is a performance-oriented desk reference that provides a base for cooperative education program operations. Chapter 1 overviews cooperative education, contrasts cooperative training and work experience programs, and…

Second International Workshop on Software Engineering and Code Design in Parallel Meteorological and Oceanographic Applications

NASA Technical Reports Server (NTRS)

OKeefe, Matthew (Editor); Kerr, Christopher L. (Editor)

1998-01-01

This report contains the abstracts and technical papers from the Second International Workshop on Software Engineering and Code Design in Parallel Meteorological and Oceanographic Applications, held June 15-18, 1998, in Scottsdale, Arizona. The purpose of the workshop is to bring together software developers in meteorology and oceanography to discuss software engineering and code design issues for parallel architectures, including Massively Parallel Processors (MPP's), Parallel Vector Processors (PVP's), Symmetric Multi-Processors (SMP's), Distributed Shared Memory (DSM) multi-processors, and clusters. Issues to be discussed include: (1) code architectures for current parallel models, including basic data structures, storage allocation, variable naming conventions, coding rules and styles, i/o and pre/post-processing of data; (2) designing modular code; (3) load balancing and domain decomposition; (4) techniques that exploit parallelism efficiently yet hide the machine-related details from the programmer; (5) tools for making the programmer more productive; and (6) the proliferation of programming models (F--, OpenMP, MPI, and HPF).

Performance Characteristics of the Multi-Zone NAS Parallel Benchmarks

NASA Technical Reports Server (NTRS)

Jin, Haoqiang; VanderWijngaart, Rob F.

2003-01-01

We describe a new suite of computational benchmarks that models applications featuring multiple levels of parallelism. Such parallelism is often available in realistic flow computations on systems of grids, but had not previously been captured in bench-marks. The new suite, named NPB Multi-Zone, is extended from the NAS Parallel Benchmarks suite, and involves solving the application benchmarks LU, BT and SP on collections of loosely coupled discretization meshes. The solutions on the meshes are updated independently, but after each time step they exchange boundary value information. This strategy provides relatively easily exploitable coarse-grain parallelism between meshes. Three reference implementations are available: one serial, one hybrid using the Message Passing Interface (MPI) and OpenMP, and another hybrid using a shared memory multi-level programming model (SMP+OpenMP). We examine the effectiveness of hybrid parallelization paradigms in these implementations on three different parallel computers. We also use an empirical formula to investigate the performance characteristics of the multi-zone benchmarks.

Coordinated School Health and the Contribution of a District Wellness Coordinator

ERIC Educational Resources Information Center

Westrich, Lisa; Sanchez, Monika; Strobel, Karen

2015-01-01

Background: A San Francisco Bay Area school health initiative was established in fall 2010 to improve wellness programs in 4 local school districts using the Coordinated School Health (CSH) model. This study examines the role of district-wide wellness coordinators and the ways in which they contribute to intentional coordination of health and…