Key Resources for Creating Online Nutrition Education for Those Participating in Supplemental Nutrition Assistance Program Education

ERIC Educational Resources Information Center

Stosich, Marie C.; LeBlanc, Heidi; Kudin, Janette S.; Christofferson, Debra

2016-01-01

Internet-based nutrition education is becoming an important tool in serving the rural, low-income community, yet the task of creating such programming can be daunting. The authors describe the key resources used in developing an Internet-based nutrition education program for those participating in Supplemental Nutrition Assistance Program…

The application of acoustic emission technique to fatigue crack measurement. [in aluminum alloys

NASA Technical Reports Server (NTRS)

Singh, J. J.; Davis, W. T.; Crews, J. H., Jr.

1974-01-01

The applicability of acoustic emission technique to measure fatigue cracks in aluminum alloy specimens was investigated. There are several variables, such as the metallurgical and the physical treatment of the specimen, that can affect the level of acoustic activity of a fatigue specimen. It is therefore recommended that the acoustic emission technique be supplemented by other nondestructive evaluation methods to obtain quantitative data on crack growth.

Gas tungsten arc welding of aluminum alloys 6XXX. Welding procedure specification. Supplement 1. Records of procedure qualification tests. [6061 and 6063

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wodtke, C.H.; Frizzell, D.R.; Plunkett, W.A.

1986-06-01

Procedure WPS-1003 is qualified under Section IX of the ASME Boiler and Pressure Vessel Code for gas tungsten arc welding of aluminum alloys 6061 and 6063 (P-23), in thickness range 0.035 to 0.516 inch; filler metal is ER4043 (F-23) or ER5356 (F-22); shielding gas is argon.

Advances in aluminum powder usage as an energetic material and applications for rocket propellant

NASA Astrophysics Data System (ADS)

Sadeghipour, S.; Ghaderian, J.; Wahid, M. A.

2012-06-01

Energetic materials have been widely used for military purposes. Continuous research programs are performing in the world for the development of the new materials with higher and improved performance comparing with the available ones in order to fulfill the needs of the military in future. Different sizes of aluminum powders are employed to produce composite rocket propellants with the bases of Ammonium Perchlorate (AP) and Hydroxyl-Terminated-Polybutadiene (HTPB) as oxidizer and binder respectively. This paper concentrates on recent advances in using aluminum as an energetic material and the properties and characteristics pertaining to its combustion. Nano-sized aluminum as one of the most attractable particles in propellants is discussed particularly.

Selenium Alleviates Oxidative Stress and Lung Damage Induced by Aluminum Chloride in Adult Rats: Biochemical and Histological Approach.

PubMed

Ghorbel, Imen; Elwej, Awatef; Chaabane, Mariem; Jamoussi, Kamel; Mnif, Hela; Boudawara, Tahia; Zeghal, Najiba

2017-03-01

Our study pertains to the potential ability of selenium, used as a nutritional supplement, to alleviate oxidative stress induced by aluminum chloride in the lung tissue. Rats have received during 21 days either aluminum chloride (AlCl 3 ) (400 ppm) via drinking water, AlCl 3 associated with Na 2 SeO 3 (0.5 mg/kg of diet), or only Na 2 SeO 3 . Exposure of rats to AlCl 3 induced lung oxidative stress with an increase of malondialdehyde, hydrogen peroxide, and protein carbonyls levels. An alteration of lactate dehydrogenase activities and antioxidant redox status, enzymatic (catalase, superoxide dismutase, and glutathione peroxidase), and non-enzymatic (non-protein thiols, glutathione, metallothionein, and vitamin C) was also observed. These biochemical modifications were substantiated by histopathological data showing alveolar edema, a large number of hemosiderin-laden macrophages, and emphysema. Se supplementation attenuated the levels of oxidative stress by restoring antioxidant state and improved lung histological damage. Our results revealed that Se, a trace element with antioxidant properties, was effective in preventing lung damage.

Materials data handbook: Aluminum alloy 2014, 2nd edition

NASA Technical Reports Server (NTRS)

Muraca, R. F.; Whittick, J. S.

1972-01-01

A revised edition of the materials data handbook on the aluminum alloy 2014 is presented. The scope of the information presented includes physical and mechanical property data at cryogenic, ambient and elevated temperatures, supplemented with useful information in such areas as material procurement, metallurgy of the alloy, corrosion, environmental effects, fabrication and joining techniques. Design data are presented, as available, and these data are complemented with information on the typical behavior of the alloy.

Proof test criteria for thin-walled 2219 aluminum pressure vessels. Volume 1: Program summary and data analysis

NASA Technical Reports Server (NTRS)

Finger, R. W.

1976-01-01

This experimental program was undertaken to investigate the crack growth behavior of deep surface flaws in 2219 aluminum. The program included tests of uniaxially loaded surface flaw and center crack panels at temperatures ranging from 20K (-423 F) to ambient. The tests were conducted on both the base metal and as-welded weld metal material. The program was designed to provide data on the mechanisms of failure by ligament penetration, and the residual cyclic life, after proof-testing, of a vessel which has been subjected to incipient penetration by the proof test. The results were compared and analyzed with previously developed data to develop guidelines for the proof testing of thin walled 2219 pressure vessels.

Supplement Use of Elite Australian Swimmers.

PubMed

Shaw, Gregory; Slater, Gary; Burke, Louise M

2016-06-01

This study examined the influence the Australian Institute of Sport (AIS) Sport Supplement Program had on supplement practices of elite Australian swimmers, comparing those guided by the Program with others in the same national team. Thirty-nine elite swimmers (13 AIS, 26 Other; 20 female, 19 male; age 21.8 ± 3.3 y) completed a questionnaire investigating supplement use. Ninety-seven percent of swimmers reported taking supplements or sports foods over the preceding 12 months. AIS swimmers reported using more total brands (p = .02) and supplements considered Ergogenic (p = .001) than Other swimmers who used more supplements considered to be lacking scientific support (p = .028). Swimmers rated the risk of a negative outcome from the use of supplements available in Australia (Mdn = 3.0) as less than the risk of supplements from international sources (Mdn = 4.0; p < .001). AIS swimmers were more likely to report dietitians (p < .001) and sports physicians (p = .017) as advisors of their supplement use. Other swimmers more frequently reported fellow athletes as a source of supplement advice (p = .03). AIS swimmers sourced a greater percentage of their supplements from an organized program (94 ± 16%) compared with Other (40 ± 32%; p < .001) who sourced a greater percentage (30 ± 30%) of their dietary supplements from supermarkets. These findings suggest that swimmers influenced by this sport supplement program more frequently use supplements that are recommended by allied health trained individuals, classified as evidence based and provided by the program.

Welding procedure specification. Supplement 1. Records of procedure qualification tests. Gas tungsten arc welding of aluminum alloys 3004, 5052, and 5X54

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wodtke, C.H.; Frizzell, D.R.; Plunkett, W.A.

1986-06-01

Procedure WPS-1002 is qualified under Section IX of the ASME Boiler and Pressure Vessel Code for gas tungsten arc welding of aluminum alloys 3004, 5052, 5154, and 5454 (P-22), in thickness range 0.062 to 0.5 inches; filler metal is ER4043 (F-23) for 3004, and ER5356 (F-22) for other alloys; shielding gas is argon.

Resources for Performance-Based Education. Supplement A.

ERIC Educational Resources Information Center

Houston, W. Robert; And Others

This document is a supplement to the annotated bibliography "Resources for Performance-Based Education," published by the New York State Education Department (ED 076 555). The supplement adds new instructional modules, films, slide/tapes, programmed materials, video tapes, and other nontextbook materials useful for supporting performance-based…

Video-Based Supplemental Instruction: Creating Opportunities for At-Risk Students Undertaking Engineering Mathematics

ERIC Educational Resources Information Center

Armstrong, Lyn; Power, Clare; Coady, Carmel; Dormer, Lynette

2011-01-01

Since its introduction at the University of Western Sydney (UWS), Australia in 2007, the Peer Assisted Study Sessions (PASS) program has proved a very effective and popular methodology for increasing retention and enhancing student engagement. PASS is based on Supplemental Instruction (SI) which is an international program that provides peer led,…

An investigation of waste glass-based geopolymers supplemented with alumina

NASA Astrophysics Data System (ADS)

Christiansen, Mary U.

An increased consideration of sustainability throughout society has resulted in a surge of research investigating sustainable alternatives to existing construction materials. A new binder system, called a geopolymer, is being investigated to supplement ordinary portland cement (OPC) concrete, which has come under scrutiny because of the CO2 emissions inherent in its production. Geopolymers are produced from the alkali activation of a powdered aluminosilicate source by an alkaline solution, which results in a dense three-dimensional matrix of tetrahedrally linked aluminosilicates. Geopolymers have shown great potential as a building construction material, offering similar mechanical and durability properties to OPC. Additionally, geopolymers have the added value of a considerably smaller carbon footprint than OPC. This research considered the compressive strength, microstructure and composition of geopolymers made from two types of waste glass with varying aluminum contents. Waste glass shows great potential for mainstream use in geopolymers due to its chemical and physical homogeneity as well as its high content of amorphous silica, which could eliminate the need for sodium silicate. However, the lack of aluminum is thought to negatively affect the mechanical performance and alkali stability of the geopolymer system. 39 Mortars were designed using various combinations of glass and metakaolin or fly ash to supplement the aluminum in the system. Mortar made from the high-Al glass (12% Al2O3) reached over 10,000 psi at six months. Mortar made from the low-Al glass (<1% Al2O3) did not perform as well and remained sticky even after several weeks of curing, most likely due to the lack of Al which is believed to cause hardening in geopolymers. A moderate metakaolin replacement (25-38% by mass) was found to positively affect the compressive strength of mortars made with either type of glass. Though the microstructure of the mortar was quite indicative of mechanical performance, composition was also found to be important. The initial stoichiometry of the bulk mixture was maintained fairly closely, especially in mixtures made with fine glass. This research has shown that glass has great potential for use in geopolymers, when care is given to consider the compositional and physical properties of the glass in mixture design.

SSmiles.

ERIC Educational Resources Information Center

Sunal, Dennis W., Ed.; Tracy, Dyanne M., Ed.

1992-01-01

Presents activities to supplement lessons on length and mass measurement or as part of a unit on atoms or orders of magnitude. Provides a lesson plan using aluminum foil to estimate unit measures, calculate the foil's thickness, and do an atom count. (MDH)

34 CFR 200.88 - Exclusion of supplemental State and local funds from supplement, not supplant and comparability...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the SEA must make an advance written determination that the program meets the intent and purposes of... migratory children, as defined in section 1309 of the ESEA. (2) The program is based on performance targets... these requirements. (4) The grantee monitors program performance to ensure that these requirements are...

34 CFR 200.88 - Exclusion of supplemental State and local funds from supplement, not supplant and comparability...

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED Migrant Education Program § 200.88... migratory children, as defined in section 1309 of the ESEA. (2) The program is based on performance targets... these requirements. (4) The grantee monitors program performance to ensure that these requirements are...

Design of impact-resistant boron/aluminum large fan blade

NASA Technical Reports Server (NTRS)

Salemme, C. T.; Yokel, S. A.

1978-01-01

The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.

Role of Spirulina in mitigating hemato-toxicity in Swiss albino mice exposed to aluminum and aluminum fluoride.

PubMed

Sharma, Shweta; Sharma, K P; Sharma, Subhasini

2016-12-01

Aluminum is ingested through foods, water, air, and even drugs. Its intake is potentiated further through foods and tea prepared in aluminum utensils and Al salt added in the drinking water for removal of suspended impurities and also fluoride in the affected areas. The ameliorating role of a blue green alga Spirulina is well documented to various pollutants in the animal models. We, therefore, examined its protective role (230 mg/kg body weight) on the hematology of male Swiss albino mice treated with aluminum (sub-acute = 78.4 mg/kg body weight for 7 days, sub-chronic = 7.8 mg/kg body weight for 90 days) and aluminum fluoride (sub-acute = 103 mg/kg body weight, sub-chronic = 21 mg/kg body weight), along with their recovery after 90 days of sub-chronic exposure. This study revealed significant reduction in the values of RBC (5-18 %), Hb (15-17 %), PCV (8-14 %), and platelets (26-36 %), and increase in WBC (54-124 %) in the treated mice, particularly after sub-acute exposure. Aluminum fluoride was comparatively more toxic than aluminum. Further, Spirulina supplement not only alleviated toxicity of test chemicals in Swiss albino mice but also led to their better recovery after withdrawal.

Effects of Forged Stock and Pure Aluminum Coating on Cryogenic Performance of Heat Treated Aluminum Mirrors

NASA Technical Reports Server (NTRS)

Toland, Ronald; Ohl, Raymond G.; Barthelmy, Michael P.; Zewari, S. Wahid; Greenhouse, Matthew A.; MacKenty, John W.

2003-01-01

In spite of its baseline mechanical stress relief, aluminum 6061-T651 harbors some residual stress that may relieve and distort mirror figure to unacceptable levels at cryogenic operating temperatures unless relieved during fabrication. Cryogenic instruments using aluminum mirrors for both ground-based and space IR astronomy have employed a variety of heat treatment formulae, with mixed results. We present the results of an on-going test program designed to empirically determine the effects of different stress relief procedures for aluminum mirrors. Earlier test results identified a preferred heat treatment for flat and spherical mirrors diamond turned from blanks cut out of Al6061-T651 plate stock. Further tests have been performed on mirrors from forged stock and one set from plate stock coated with Alumiplate(TM) aluminum coating to measure the effect of these variables on cryogenic performance. The mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for three thermal cycles. We correlate the results of our optical testing with heat treatment and metallographic data.

Aluminum Lithium Alloy 2195 Fusion Welding Improvements with New Filler Wire

NASA Technical Reports Server (NTRS)

Russell, Carolyn; Bjorkman, Gerry; McCool, Carolyn (Technical Monitor)

2000-01-01

A viewgraph presentation outlines NASA Marshall Space Flight Center, Lockheed Martin Michoud Space Systems, and McCook Metals' development an aluminum-copper weld filler wire for fusion welding 2195 aluminum lithium. The aluminum-copper based weld filler wire has been identified as B218, which is the result of six years of weld filler wire development funded by NASA, Lockheed Martin, and McCook Metals. The Super Lightweight External Tank for the NASA Space Shuttle Program consists of 2195 welded with 4043 aluminum-silicon weld filler wire. The B218 filler wire chemistry was developed to produce enhanced 2195 weld and repair weld mechanical properties. An initial characterization of the B218 weld filler wire was performed consisting of initial weld and repair weld evaluation comparing B218 and 4043. The testing involved room temperature and cryogenic tensile testing along with fracture toughness testing. B218 weld filler wire proved to produce enhanced initial and repair weld tensile and fracture properties over 4043. B218 weld filler wire has proved to be a superior weld filler wire for welding 2195 and other aluminum lithium alloys over 4043.

Growing Up Strong: A Mental Wellness and Life Skills Development Program. American Indian Supplement--Preschool through Third Grade.

ERIC Educational Resources Information Center

Hammer, Judith McGowan; O'Bar, Angelina Merenda

The Growing Up Strong (GUS) program, a mental wellness and substance abuse prevention program, is based on the assumption that all children need a sense of belonging, heightened self-esteem, life skills development, and a positive self-concept. The American Indian Supplement was designed for use in conjunction with preschool, kindergarten and…

Drosophila melanogaster as a model system of aluminum toxicity and aging.

PubMed

Kijak, Ewelina; Rosato, Ezio; Knapczyk, Katarzyna; Pyza, Elżbieta

2014-04-01

The aim of this study was to investigate the toxic effects of aluminum (Al) on the model organism-Drosophila melanogaster. The study is especially concerned with the effects of aluminum on the fruit fly's development, life span, and circadian rhythm in rest and activity. Flies were exposed to aluminum in concentrations from 40 to 280 mg/kg in rearing media or the flies were raised on control medium. Moreover, the life span of insects exposed to aluminum containing 40, 120, or 240 mg/kg of Al in the medium, only during their larval development, during the whole life cycle and only in their adult life was tested. To check if aluminum and aging cause changes in D. melanogaster behavior, the locomotor activity of flies at different ages was recorded. Results showed that aluminum is toxic in concentrations above 160 mg/kg in the rearing medium. Depending on Al concentration and time of exposure, the life span of the flies was shortened. At intermediate concentrations (120 mg/kg), however, Al had a stimulating effect on males increasing their life span and level of locomotor activity. At higher concentration the aluminum exposure increased or decreased the level of locomotor activity of D. melanogaster depending on age of flies. In addition, in the oldest insects reared on aluminum supplemented media and in mid-aged flies reared on the highest concentration of Al the daily rhythm of activity was disrupted. © 2013 Institute of Zoology, Chinese Academy of Sciences.

The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters

DTIC Science & Technology

2016-01-04

AFRL-AFOSR-VA-TR-2016-0075 The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters KIT BOWEN JOHNS HOPKINS UNIV BALTIMORE MD...Hydride and Boron Aluminum Hydride Clusters 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-14-1-0324 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) KIT...of both Aluminum Hydride Cluster Anions and Boron Aluminum Hydride Cluster Anions with Oxygen: Anionic Products The anionic products of reactions

Teen Living 7015. Work and Family Supplement.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

This supplement to the Teen Living curriculum contains materials to help teachers integrate family skills and tech prep skills into consumer home economics programs. It is keyed to a 2-semester consumer home economics course, based on the North Carolina Program of Studies (revised 1992); it is designed to help students focus on the relationship…

Nutrition and Growth: Recent Research Findings and Research Priorities. Matrix No. 3.

ERIC Educational Resources Information Center

Graham, George G.

Recent research indicates that low income adults and infants in the United States are more likely to be overweight than undernourished. Very possibly, the assumptions upon which food supplement programs are based are ill-founded. While many of the currently operating broadly conceived supplemental food programs achieve desirable collateral…

Federal Student Aid Handbook, 2006-2007. Volume 6: Campus-Based Programs

ERIC Educational Resources Information Center

US Department of Education, 2006

2006-01-01

The Federal Perkins Loan, Federal Supplemental Educational Opportunity Grant (FSEOG), and Federal Work-Study (FWS) programs are called "campus-based" programs because each school is responsible for administering them on its own campus. This volume gives guidance on issues specific to the administration of the campus-based programs.…

Advanced powder metallurgy aluminum alloys and composites

NASA Technical Reports Server (NTRS)

Lisagor, W. B.; Stein, B. A.

1982-01-01

The differences between powder and ingot metallurgy processing of aluminum alloys are outlined. The potential payoff in the use of advanced powder metallurgy (PM) aluminum alloys in future transport aircraft is indicated. The national program to bring this technology to commercial fruition and the NASA Langley Research Center role in this program are briefly outlined. Some initial results of research in 2000-series PM alloys and composites that highlight the property improvements possible are given.

Chrome - Free Aluminum Coating System

NASA Technical Reports Server (NTRS)

Bailey, John H.; Gugel, Jeffrey D.

2010-01-01

This slide presentation concerns the program to qualify a chrome free coating for aluminum. The program was required due to findings by OSHA and EPA, that hexavalent chromium, used to mitigate corrosion in aerospace aluminum alloys, poses hazards for personnel. This qualification consisted of over 4,000 tests. The tests revealed that a move away from Cr+6, required a system rather than individual components and that the maximum corrosion protection required pretreatment, primer and topcoat.

Study of diffusion bond development in 6061 aluminum and its relationship to future high density fuels fabrication.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prokofiev, I.; Wiencek, T.; McGann, D.

1997-10-07

Powder metallurgy dispersions of uranium alloys and silicides in an aluminum matrix have been developed by the RERTR program as a new generation of proliferation-resistant fuels. Testing is done with miniplate-type fuel plates to simulate standard fuel with cladding and matrix in plate-type configurations. In order to seal the dispersion fuel plates, a diffusion bond must exist between the aluminum coverplates surrounding the fuel meat. Four different variations in the standard method for roll-bonding 6061 aluminum were studied. They included mechanical cleaning, addition of a getter material, modifications to the standard chemical etching, and welding methods. Aluminum test pieces weremore » subjected to a bend test after each rolling pass. Results, based on 400 samples, indicate that at least a 70% reduction in thickness is required to produce a diffusion bond using the standard rollbonding method versus a 60% reduction using the Type II method in which the assembly was welded 100% and contained open 9mm holes at frame corners.« less

Advances in aluminum hydroxide-based adjuvant research and its mechanism.

PubMed

He, Peng; Zou, Yening; Hu, Zhongyu

2015-01-01

In the past few decades, hundreds of materials have been tried as adjuvant; however, only aluminum-based adjuvants continue to be used widely in the world. Aluminum hydroxide, aluminum phosphate and alum constitute the main forms of aluminum used as adjuvants. Among these, aluminum hydroxide is the most commonly used chemical as adjuvant. In spite of its wide spread use, surprisingly, the mechanism of how aluminum hydroxide-based adjuvants exert their beneficial effects is still not fully understood. Current explanations for the mode of action of aluminum hydroxide-based adjuvants include, among others, the repository effect, pro-phagocytic effect, and activation of the pro-inflammatory NLRP3 pathway. These collectively galvanize innate as well as acquired immune responses and activate the complement system. Factors that have a profound influence on responses evoked by aluminum hydroxide-based adjuvant applications include adsorption rate, strength of the adsorption, size and uniformity of aluminum hydroxide particles, dosage of adjuvant, and the nature of antigens. Although vaccines containing aluminum hydroxide-based adjuvants are beneficial, sometimes they cause adverse reactions. Further, these vaccines cannot be stored frozen. Until recently, aluminum hydroxide-based adjuvants were known to preferentially prime Th2-type immune responses. However, results of more recent studies show that depending on the vaccination route, aluminum hydroxide-based adjuvants can enhance both Th1 as well as Th2 cellular responses. Advances in systems biology have opened up new avenues for studying mechanisms of aluminum hydroxide-based adjuvants. These will assist in scaling new frontiers in aluminum hydroxide-based adjuvant research that include improvement of formulations, use of nanoparticles of aluminum hydroxide and development of composite adjuvants.

Advances in aluminum hydroxide-based adjuvant research and its mechanism

PubMed Central

He, Peng; Zou, Yening; Hu, Zhongyu

2015-01-01

In the past few decades, hundreds of materials have been tried as adjuvant; however, only aluminum-based adjuvants continue to be used widely in the world. Aluminum hydroxide, aluminum phosphate and alum constitute the main forms of aluminum used as adjuvants. Among these, aluminum hydroxide is the most commonly used chemical as adjuvant. In spite of its wide spread use, surprisingly, the mechanism of how aluminum hydroxide-based adjuvants exert their beneficial effects is still not fully understood. Current explanations for the mode of action of aluminum hydroxide-based adjuvants include, among others, the repository effect, pro-phagocytic effect, and activation of the pro-inflammatory NLRP3 pathway. These collectively galvanize innate as well as acquired immune responses and activate the complement system. Factors that have a profound influence on responses evoked by aluminum hydroxide-based adjuvant applications include adsorption rate, strength of the adsorption, size and uniformity of aluminum hydroxide particles, dosage of adjuvant, and the nature of antigens. Although vaccines containing aluminum hydroxide-based adjuvants are beneficial, sometimes they cause adverse reactions. Further, these vaccines cannot be stored frozen. Until recently, aluminum hydroxide-based adjuvants were known to preferentially prime Th2-type immune responses. However, results of more recent studies show that depending on the vaccination route, aluminum hydroxide-based adjuvants can enhance both Th1 as well as Th2 cellular responses. Advances in systems biology have opened up new avenues for studying mechanisms of aluminum hydroxide-based adjuvants. These will assist in scaling new frontiers in aluminum hydroxide-based adjuvant research that include improvement of formulations, use of nanoparticles of aluminum hydroxide and development of composite adjuvants. PMID:25692535

Manual for Drug Abuse Treatment Program Self-Evaluation. Supplement II: CODAP Tables.

ERIC Educational Resources Information Center

Guess, L. Lynn; Tuchfeld, Barry S.

This is the second of two supplements to a manual on the self-evaluation of drug abuse treatment programs. Data based on treatment outcome information that agencies and clinics routinely collect or have available in the files of individual clients are presented. While it is possible to use this volume without referring to the discussion of…

Non-Heat Treatable Alloy Sheet Products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayden, H.W.; Barthold, G.W.; Das, S.K.

ALCAR is an innovative approach for conducting multi-company, pre-competitive research and development programs. ALCAR has been formed to crate a partnership of aluminum producers, the American Society of Mechanical Engineers Center for Research and Technology Development (ASME/CRTD), the United States Department of Energy (USDOE), three USDOE National Laboratories, and a Technical Advisory Committee for conducting cooperative, pre-competitive research on the development of flower-cost, non-heat treated (NHT) aluminum alloys for automotive sheet applications with strength, formability and surface appearance similar to current heat treated (HT) aluminum alloys under consideration. The effort has been supported by the USDOE, Office of Transportation Technologymore » (OTT) through a three-year program with 50/50 cost share at a total program cost of $3 million. The program has led to the development of new and modified 5000 series aluminum ally compositions. Pilot production-size ingots have bee n melted, cast, hot rolled and cold rolled. Stamping trials on samples of rolled product for demonstrating production of typical automotive components have been successful.« less

Blood cell transcriptomic-based early biomarkers of adverse programming effects of gestational calorie restriction and their reversibility by leptin supplementation

PubMed Central

Konieczna, Jadwiga; Sánchez, Juana; Palou, Mariona; Picó, Catalina; Palou, Andreu

2015-01-01

The challenge of preventing major chronic diseases requires reliable, early biomarkers. Gestational mild undernutrition in rats is enough to program the offspring to develop later pathologies; the intake of leptin, a breastmilk component, during lactation may reverse these programming effects. We used these models to identify, in peripheral blood mononuclear cells (PBMCs), transcriptomic-based early biomarkers of programmed susceptibility to later disorders, and explored their response to neonatal leptin intake. Microarray analysis was performed in PBMCs from the offspring of control and 20% gestational calorie-restricted dams (CR), and CR-rats supplemented with physiological doses of leptin throughout lactation. Notably, leptin supplementation normalised 218 of the 224 mRNA-levels identified in PBMCs associated to undernutrition during pregnancy. These markers may be useful for early identification and subsequent monitoring of individuals who are at risk of later diseases and would specifically benefit from the intake of appropriate amounts of leptin during lactation. PMID:25766068

A Generic Structural Integrity Assurance Technology Program for the Army

DTIC Science & Technology

1989-11-01

and Pressure Vessel Code , American Society of Mechanical Engineers, 1986. DEFINITIONS AND ACRONYMS Definitions A-Basis: At least 99 percent of the...Aluminum Bridge and Other Highway Structures, 1976. Aluminum Association Specifications for Aluminum Structures, Third Edition, 1976. ASME ASME Boiler

Modeling the Propagation of Shock Waves in Metals

NASA Astrophysics Data System (ADS)

Howard, W. Michael

2005-07-01

We present modeling results for the propagation of strong shock waves in metals. In particular, we use an arbitrary Lagrange Eulerian (ALE3D) code to model the propagation of strong pressure waves (P ˜300 to 400 kbars) generated with high explosives in contact with aluminum cylinders. The aluminum cylinders are assumed to be both flat-topped and have large-amplitude curved surfaces. We use 3D Lagrange mechanics. For the aluminum we use a rate-independent Steinberg-Guinan model, where the yield strength and bulk modulus depends on pressure, density and temperature. The calculation of the melt temperature is based on the Lindermann law. At melt the yield strength and bulk modulus is set to zero. The pressure is represented as a seven-term polynomial as a function of density. For the HMX-based high explosive, we use a JWL, with a program burn model that gives the correct detonation velocity and C-J pressure (P ˜ 390 kbars). For the case of the large-amplitude curved surface, we discuss the evolving shock structure in terms of the early shock propagation experiments by Sakharov. We also discuss the dependence of our results upon our material model for aluminum.

Quasi-Static Tensile Stress-Strain Curves. 1, 2024-T3510 Aluminum Alloy

DTIC Science & Technology

1976-02-01

herein were conducted as part of the Core Materials Program of the Solid Mechanics Branch of the Terminal Ballistics Laboratory. The objective of this...describing the results of the Core Materials Program, covers quasi-static terVsile tests of 2024-T3510 aluminum E’lloy. The results include Young’s...11.31 4 580.6 9.94 TABLE II MATERIAL PROPERTIES OF 2024-T3510 ALUMINUM ALLOYa Results of Results of Results of Tensileb Compres ion Sonic Testing

Procedures for testing and evaluating spacecraft-type heat pipes

NASA Astrophysics Data System (ADS)

Tower, L. K.; Kaufman, W. B.

1984-04-01

This report describes part of an effort to develop dependable, cost effective spacecraft thermal control heat pipes. In the program the reliability and performance of 30 commercially available heat pipes were assessed. The pipes comprised 10 groups of varying design, with aluminum and stainless steel as structural materials, and methanol and ammonia as working fluids. The factors studied were noncondensible gas accumulation and heat transfer capability in one g. The present report supplements a brief earlier report by describing in detail the procedures required to conduct a comprehensive evaluation of heat pipes for thermal control. It discusses the test facilities and testing procedures. The manner in which data may be taken for estimating useful life and comparing performance is described. Some of the pitfalls in making such judgments are illustrated. Originator supplied keywords include: heat transfer, and corrosion.

Evaluation of several corrosion protective coating systems on aluminum

NASA Technical Reports Server (NTRS)

Higgins, R. H.

1981-01-01

A study of several protective coating systems for use on aluminum in seawater/seacoast environments was conducted to review the developments made on protective coatings since early in the Space Shuttle program and to perform comparative studies on these coatings to determine their effectiveness for providing corrosion protection during exposure to seawater/seacoast environments. Panels of 2219-T87 aluminum were coated with 21 different systems and exposed to a 5 percent salt spray for 4000 hr. Application properties, adhesion measurements, heat resistance and corrosion protection were evaluated. For comparative studies, the presently specified Bostik epoxy system used on the SRB structures was included. Results of these tests indicate four systems with outstanding performance and four additional systems with protection almost as good. These systems are based on a chromated pretreatment, a chromate epoxy primer, and a polyurethane topcoat. Consideration for one of these systems should be included for those applications where superior corrosion protection for aluminum surfaces is required.

Design and Fabrication of a Ring-Stiffened Graphite-Epoxy Corrugated Cylindrical Shell

NASA Technical Reports Server (NTRS)

Johnson, R., Jr.

1978-01-01

Design and fabrication of supplement test panels that represent key portions of the cylinder are described, as are supporting tests of coupons, sample joints, and stiffening ring elements. The cylindrical shell is a ring-stiffened, open corrugation design that uses T300/5208 graphite-epoxy tape as the basic material for the shell wall and stiffening rings. The test cylinder is designed to withstand bending loads producing the relatively low maximum load intensity in the shell wall of 1,576 N/cm. The resulting shell wall weight, including stiffening rings and fasteners, is 0.0156 kg/m. The shell weight achieved in the graphite-epoxy cylinder represents a weight saving of approximately 23 percent, compared to a comparable aluminum shell. A unique fabrication approach was used in which the cylinder wall was built in three flat segments, which were then wrapped to the cylindrical shape. Such an approach, made possible by the flexibility of the thin corrugated wall in a radial direction, proved to be a simple approach to building the test cylinder. Based on tooling and fabrication methods in this program, the projected costs of a production run of 100 units are reported.

Assessing Coverage of Population-Based and Targeted Fortification Programs with the Use of the Fortification Assessment Coverage Toolkit (FACT): Background, Toolkit Development, and Supplement Overview.

PubMed

Friesen, Valerie M; Aaron, Grant J; Myatt, Mark; Neufeld, Lynnette M

2017-05-01

Food fortification is a widely used approach to increase micronutrient intake in the diet. High coverage is essential for achieving impact. Data on coverage is limited in many countries, and tools to assess coverage of fortification programs have not been standardized. In 2013, the Global Alliance for Improved Nutrition developed the Fortification Assessment Coverage Toolkit (FACT) to carry out coverage assessments in both population-based (i.e., staple foods and/or condiments) and targeted (e.g., infant and young child) fortification programs. The toolkit was designed to generate evidence on program coverage and the use of fortified foods to provide timely and programmatically relevant information for decision making. This supplement presents results from FACT surveys that assessed the coverage of population-based and targeted food fortification programs across 14 countries. It then discusses the policy and program implications of the findings for the potential for impact and program improvement.

Association of proteomics changes with Al-sensitive root zones in switchgrass

USDA-ARS?s Scientific Manuscript database

In this paper, we report on aluminum (Al)-induced root proteomic changes in switchgrass. After growth in a hydroponic culture system supplemented with 400 uM of Al, plants began to show signs of physiological stress such as a reduction in photosynthetic rate. At this time, the basal 2-cmlong root ti...

Secondary aluminum industry final emissions test report: Culp Aluminum Alloys, Steele, Alabama. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The purpose of this testing program was to obtain emissions data for uncontrolled and controlled hydrochloric acid (HCl), particulate matter (PM) and speciated hydrocarbon Hazardous Air Pollutants (HAPs) from a secondary aluminum processing plant to support a national emission standard for hazardous air pollutants (NESHAP).

B218 Weld Filler Wire Characterization for Al-Li Alloy 2195

NASA Technical Reports Server (NTRS)

Bjorkman, Gerry; Russell, Carolyn

2000-01-01

NASA Marshall Space Flight Center, Lockheed Martin Space Systems- Michoud Operations, and McCook Metals have developed an aluminum-copper weld filler wire for fusion welding aluminum lithium alloy 2195. The aluminum-copper based weld filler wire has been identified as B218, a McCook Metals designation. B218 is the result of six years of weld filler wire development funded by NASA, Lockheed Martin, and McCook Metals. The filler wire chemistry was developed to produce enhanced 2195 weld and repair weld mechanical properties over the 4043 aluminum-silicon weld filler wire, which is currently used to weld 2195 on the Super Lightweight External Tank for the NASA Space Shuttle Program. An initial characterization was performed consisting of a repair weld evaluation using B218 and 4043 weld filler wires. The testing involved room temperature and cryogenic repair weld tensile testing along with fracture toughness testing. From the testing, B218 weld filler wire produce enhanced repair weld tensile strength, ductility, and fracture properties over 4043. B218 weld filler wire has proved to be a superior weld filler wire for welding aluminum lithium alloy 2195 over 4043.

A randomized controlled trial of nutrition education to promote farmers' market fruit and vegetable purchases and consumption among women enrolled in the Special Supplemental Nutrition Program for Women, Infants and Children

USDA-ARS?s Scientific Manuscript database

This report describes the protocol guiding the design and evaluation of a theory-driven, web-based lesson to promote farmers' market fruit and vegetable (FV) purchases and consumption among women enrolled in the Special Supplemental Nutrition Program for Women, Infants and Children (WIC). Designed t...

Long-Term Immunogenicity of an Inactivated Split-Virion 2009 Pandemic Influenza A H1N1 Virus Vaccine with or without Aluminum Adjuvant in Mice

PubMed Central

Xu, Wenting; Zheng, Mei; Zhou, Feng

2015-01-01

In 2009, a global epidemic of influenza A(H1N1) virus caused the death of tens of thousands of people. Vaccination is the most effective means of controlling an epidemic of influenza and reducing the mortality rate. In this study, the long-term immunogenicity of influenza A/California/7/2009 (H1N1) split vaccine was observed as long as 15 months (450 days) after immunization in a mouse model. Female BALB/c mice were immunized intraperitoneally with different doses of aluminum-adjuvanted vaccine. The mice were challenged with a lethal dose (10× 50% lethal dose [LD50]) of homologous virus 450 days after immunization. The results showed that the supplemented aluminum adjuvant not only effectively enhanced the protective effect of the vaccine but also reduced the immunizing dose of the vaccine. In addition, the aluminum adjuvant enhanced the IgG antibody level of mice immunized with the H1N1 split vaccine. The IgG level was correlated to the survival rate of the mice. Aluminum-adjuvanted inactivated split-virion 2009 pandemic influenza A H1N1 vaccine has good immunogenicity and provided long-term protection against lethal influenza virus challenge in mice. PMID:25589552

Partial compilation and revision of basic data in the WATEQ programs

USGS Publications Warehouse

Nordstrom, D. Kirk; Valentine, S.D.; Ball, J.W.; Plummer, Niel; Jones, B.F.

1984-01-01

Several portions of the basic data in the WATEQ series of computer programs (WATEQ, WATEQF, WATEQ2, WATEQ3, and PHREEQE) are compiled. The density and dielectric constant of water and their temperature dependence are evaluated for the purpose of updating the Debye-Huckel solvent parameters in the activity coefficient equations. The standard state thermodynamic properties of the Fe2+ and Fe3+ aqueous ions are refined. The main portion of this report is a comprehensive listing of aluminum hydrolysis constants, aluminum fluoride, aluminum sulfate, calcium chloride, magnesium chloride, potassium sulfate and sodium sulfate stability constants, solubility product constants for gibbsite and amorphous aluminum hydroxide, and the standard electrode potentials for Fe (s)/Fe2+(aq) and Fe2 +(aq)/Fe3+(aq). (USGS)

Investigation of the role of α-lipoic acid on fatty acids profile, some minerals (zinc, copper, iron) and antioxidant activity against aluminum-induced oxidative stress in the liver of male rats.

PubMed

Sahin, Zafer; Ozkaya, Ahmet; Yilmaz, Okkes; Yuce, Abdurrauf; Gunes, Mehmet

2017-07-26

We have investigated the effects of α-lipoic acid (LA), a powerful antioxidant, on the fatty acid (FA) profiles, aluminum accumulation, antioxidant activity and some minerals such as zinc, copper and iron against aluminum chloride (AlCl3)-induced oxidative stress in rat liver. Twenty-eight male Wistar rats were divided into four groups as control, LA, AlCl3 and LA+AlCl3. For 30 days, LA was intraperitoneally administrated (50 mg/kg) and AlCl3 was given via orogastric gavage (1600 ppm) every other day. AlCl3-treated animals exhibited higher hepatic malondialdehyde concentration and lower glutathione peroxidase and catalase activity, whereas these alterations were restored by the LA supplementation. Total saturated FA of the AlCl3-treated group was higher than the LA supplementation groups. Moreover, total unsaturated FA level of the LA+AlCl3 group was higher than the AlCl3-treated group. Hepatic zinc level of the AlCl3-treated group was lower than the control group, whereas it was higher in the LA and the LA+AlCl3 groups. Hepatic copper levels did not significantly change in the experimental groups. Iron level was lower in the LA and LA+AlCl3 groups compared with the AlCl3-treated group. Moreover, the liver Al concentration was found to be lower in the LA and LA+AlCl3 groups compared to the AlCl3 group. These results indicate that AlCl3 treatment can induce oxidative stress in the liver. LA supplementation has a beneficial effect on the AlCl3-induced alterations such as high lipid peroxidation, Al accumulation, FA profile ratios and mineral concentrations.

Recent Developments in the Formability of Aluminum Alloys

NASA Astrophysics Data System (ADS)

Banabic, Dorel; Cazacu, Oana; Paraianu, Liana; Jurco, Paul

2005-08-01

The paper presents a few recent contributions brought by the authors in the field of the formability of aluminum alloys. A new concept for calculating Forming Limit Diagrams (FLD) using the finite element method is presented. The article presents a new strategy for calculating both branches of an FLD, using a Hutchinson - Neale model implemented in a finite element code. The simulations have been performed with Abaqus/Standard. The constitutive model has been implemented using a UMAT subroutine. The plastic anisotropy of the sheet metal is described by the Cazacu-Barlat and the BBC2003 yield criteria. The theoretical predictions have been compared with the results given by the classical Hutchinson - Neale method and also with experimental data for different aluminum alloys. The comparison proves the capability of the finite element method to predict the strain localization. A computer program used for interactive calculation and graphical representation of different Yield Loci and Forming Limit Diagrams has also been developed. The program is based on a Hutchinson-Neale model. Different yield criteria (Hill 1948, Barlat-Lian and BBC 2003) are implemented in this model. The program consists in three modules: a graphical interface for input, a module for the identification and visualization of the yield surfaces, and a module for calculating and visualizing the forming limit curves. A useful facility offered by the program is the possibility to perform the sensitivity analysis both for the yield surface and the forming limit curves. The numerical results can be compared with experimental data, using the import/export facilities included in the program.

Recent Developments in the Formability of Aluminum Alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banabic, Dorel; Paraianu, Liana; Jurco, Paul

The paper presents a few recent contributions brought by the authors in the field of the formability of aluminum alloys. A new concept for calculating Forming Limit Diagrams (FLD) using the finite element method is presented. The article presents a new strategy for calculating both branches of an FLD, using a Hutchinson - Neale model implemented in a finite element code. The simulations have been performed with Abaqus/Standard. The constitutive model has been implemented using a UMAT subroutine. The plastic anisotropy of the sheet metal is described by the Cazacu-Barlat and the BBC2003 yield criteria. The theoretical predictions have beenmore » compared with the results given by the classical Hutchinson - Neale method and also with experimental data for different aluminum alloys. The comparison proves the capability of the finite element method to predict the strain localization. A computer program used for interactive calculation and graphical representation of different Yield Loci and Forming Limit Diagrams has also been developed. The program is based on a Hutchinson-Neale model. Different yield criteria (Hill 1948, Barlat-Lian and BBC 2003) are implemented in this model. The program consists in three modules: a graphical interface for input, a module for the identification and visualization of the yield surfaces, and a module for calculating and visualizing the forming limit curves. A useful facility offered by the program is the possibility to perform the sensitivity analysis both for the yield surface and the forming limit curves. The numerical results can be compared with experimental data, using the import/export facilities included in the program.« less

Campus-Based Financial Aid Programs: Trends and Alternative Allocation Strategies

ERIC Educational Resources Information Center

Kelchen, Robert

2017-01-01

Two federal campus-based financial aid programs, the Supplemental Educational Opportunity Grant (SEOG) and the Federal Work-Study Program (FWS), combine to provide nearly US$2 billion in funding to students with financial need. However, the allocation formulas have changed little since 1965, resulting in community colleges and newer institutions…

YF-12 Lockalloy ventral fin program, volume 1. [design analysis, fabrication, and manufacturing of aircraft structures using aluminum and beryllium alloys for the lockheed YF-12 aircraft

NASA Technical Reports Server (NTRS)

Duba, R. J.; Haramis, A. C.; Marks, R. F.; Payne, L.; Sessing, R. C.

1976-01-01

Results are presented of the YF-12 Lockalloy Ventral Fin Program which was carried out by Lockheed Aircraft Corporation - Advanced Development Projects for the joint NASA/USAF YF-12 Project. The primary purpose of the program was to redesign and fabricate the ventral fin of the YF-12 research airplane (to reduce flutter) using Lockalloy, and alloy of beryllium and aluminum, as a major structural material. A secondary purpose, was to make a material characterization study (thermodynamic properties, corrosion; fatigue tests, mechanical properties) of Lockalloy to validate the design of the ventral fin and expand the existing data base on this material. All significant information pertinent to the design and fabrication of the ventral fin is covered. Emphasis throughout is given to Lockalloy fabrication and machining techniques and attendant personnel safety precautions. Costs are also examined. Photographs of tested alloy specimens are shown along with the test equipment used.

Application of composite materials to turbofan engine fan exit guide vanes

NASA Technical Reports Server (NTRS)

Smith, G. T.

1980-01-01

A program was conducted by NASA with the JT9D engine manufacturer to develop a lightweight, cost effective, composite material fan exit guide vane design having satisfactory structural durability for commerical engine use. Based on the results of a previous company supported program, eight graphite/epoxy and graphite-glass/epoxy guide vane designs were evaluated and four were selected for fabrication and testing. Two commercial fabricators each fabricated 13 vanes. Fatigue tests were used to qualify the selected design configurations under nominally dry, 38 C (100 F) and fully wet and 60 C (140 F) environmental conditions. Cost estimates for a production rate of 1000 vanes per month ranged from 1.7 to 2.6 times the cost of an all aluminum vane. This cost is 50 to 80 percent less than the initial program target cost ratio which was 3 times the cost of an aluminum vane. Application to the JT9D commercial engine is projected to provide a weight savings of 236 N (53 lb) per engine.

Characterization of Impact Initiation of Aluminum-Based Intermetallic-Forming Reactive Materials

DTIC Science & Technology

2011-12-01

compressed intermetallic-forming aluminum-based reactive materials upon impact initiation, consisting of equi-volumetric tantalum-aluminum, tungsten-aluminum...18 2.3.4 Dynamic Energy Release Characterization using Pig Test . . . . . . 21 2.3.5 Shock Compression of Reactive Powder Mixtures...is to evaluate the reaction initiation characteristics of quasi-statically compressed intermetallic-forming aluminum-based reactive materials upon

Randomized crossover study comparing the phosphate-binding efficacy of calcium ketoglutarate versus calcium carbonate in patients on chronic hemodialysis.

PubMed

Bro, S; Rasmussen, R A; Handberg, J; Olgaard, K; Feldt-Rasmussen, B

1998-02-01

The objective of the study was to evaluate the phosphate-binding efficacy, side effects, and cost of therapy of calcium ketoglutarate granulate as compared with calcium carbonate tablets in patients on chronic hemodialysis. The study design used was a randomized, crossover open trial, and the main outcome measurements were plasma ionized calcium levels, plasma phosphate levels, plasma intact parathyroid hormone (PTH) levels, requirements for supplemental aluminum-aminoacetate therapy, patient tolerance, and cost of therapy. Nineteen patients on chronic hemodialysis were treated with a dialysate calcium concentration of 1.25 mmol/L and a fixed alfacalcidol dose for at least 2 months. All had previously tolerated therapy with calcium carbonate. Of the 19 patients included, 10 completed both treatment arms. After 12 weeks of therapy, the mean (+/-SEM) plasma ionized calcium level was significantly lower in the ketoglutarate arm compared with the calcium carbonate arm (4.8+/-0.1 mg/dL v 5.2+/-0.1 mg/dL; P = 0.004), whereas the mean plasma phosphate (4.5+/-0.3 mg/dL v 5.1+/-0.1 mg/dL) and PTH levels (266+/-125 pg/mL v 301+/-148 pg/mL) did not differ significantly between the two treatment arms. Supplemental aluminum-aminoacetate was not required during calcium ketoglutarate treatment, while two patients needed this supplement when treated with calcium carbonate. Five of 17 (29%) patients were withdrawn from calcium ketoglutarate therapy within 1 to 2 weeks due to intolerance (anorexia, vomiting, diarrhea, general uneasiness), whereas the remaining 12 patients did not experience any side effects at all. The five patients with calcium ketoglutarate intolerance all had pre-existing gastrointestinal symptoms; four of them had received treatment with cimetidine or omeprazol before inclusion into the study. Calculations based on median doses after 12 weeks showed that the cost of the therapy in Denmark was 10 times higher for calcium ketoglutarate compared with calcium carbonate (US$6.00/d v US$0.65/d). Calcium ketoglutarate may be an effective and safe alternative to treatment with aluminum-containing phosphate binders in patients on hemodialysis who are intolerant of calcium carbonate or acetate because of hypercalcemia. However, care must be exercised when dealing with patients with pre-existing gastrointestinal discomfort. Due to the high cost of the therapy, calcium ketoglutarate should be used only for selected patients.

The impact of food supplementation on infant weight gain in rural Bangladesh; an assessment of the Bangladesh Integrated Nutritional Program (BINP).

PubMed

Begum, Housne Ara; Mascie-Taylor, Cgn; Nahar, Shamsun

2007-01-01

To examine the efficiency of the Bangladesh Integrated Nutritional Program (BINP) in identifying which infants should be supplemented, whether full supplementation was given for the stipulated period of time, and whether the correct exit criteria from the supplementation programme were used. To test whether targeted food supplementation of infants between 6-12 months of age resulted in enhanced weight gain. Mallickbari Union, Bhaluka, a rural area located about 100 km north of Dhaka, Bangladesh. Five hundred and twenty-six infants followed for 6 to 12 months. Of the 526 infants studied, 368 should have received supplementation based on BINP criteria but only 111 infants (30%) did so, while a further 13% were incorrectly given supplementation. So in total over half (52.8%) of the sample was incorrectly identified for supplementation. In addition, less than a quarter of the infants received the full 90 days of supplementation and close to half of the infants exited the programme without the requisite weight gain. Infants were assigned to one of four groups: correctly supplemented, correctly non-supplemented, incorrectly supplemented or incorrectly non-supplemented. This classification provided natural controls; the correctly supplemented infants versus the incorrectly non-supplemented infants, and the correctly non-supplemented infants versus the incorrectly supplemented infants. There were no significant differences in weight gain between the correctly supplemented group and the incorrectly non-supplemented group or between the correctly non-supplemented and the incorrectly supplemented groups, nor was there any evidence of growth faltering in the incorrectly non-supplemented group. This study found serious programmatic deficiencies - inability to identify growth faltering in infants, failure to supplement for the full time period and incorrect exit procedures. There was no evidence that food supplementation had any impact on improving infant weight gain.

Quantum-Well Infrared Photodetector (QWIP) Focal Plane Assembly

NASA Technical Reports Server (NTRS)

Jhabvala, Murzy; Jhabvala, Christine A.; Ewin, Audrey J.; Hess, Larry A.; Hartmann, Thomas M.; La, Anh T.

2012-01-01

A paper describes the Thermal Infrared Sensor (TIRS), a QWIP-based instrument intended to supplement the Operational Land Imager (OLI) for the Landsat Data Continuity Mission (LDCM). The TIRS instrument is a far-infrared imager operating in the pushbroom mode with two IR channels: 10.8 and 12 microns. The focal plane will contain three 640x512 QWIP arrays mounted on a silicon substrate. The silicon substrate is a custom-fabricated carrier board with a single layer of aluminum interconnects. The general fabrication process starts with a 4-in. (approx.10-cm) diameter silicon wafer. The wafer is oxidized, a single substrate contact is etched, and aluminum is deposited, patterned, and alloyed. This technology development is aimed at incorporating three large-format infrared detecting arrays based on GaAs QWIP technology onto a common focal plane with precision alignment of all three arrays. This focal plane must survive the rigors of flight qualification and operate at a temperature of 43 K (-230 C) for five years while orbiting the Earth. The challenges presented include ensuring thermal compatibility among all the components, designing and building a compact, somewhat modular system and ensuring alignment to very tight levels. The multi-array focal plane integrated onto a single silicon substrate is a new application of both QWIP array development and silicon wafer scale integration. The Invar-based assembly has been tested to ensure thermal reliability.

Rare Earth Laser Engineering Program. Part II.

DTIC Science & Technology

YTTRIUM ALUMINUM GARNET , NEAR INFRARED RADIATION, CONCENTRATION(CHEMISTRY), YTTRIUM COMPOUNDS, ALUMINUM COMPOUNDS, OXIDES, RELAXATION, RATES...VANADATES, DOPING, LANTHANUM, ERBIUM, HOLMIUM, GADOLINIUM COMPOUNDS, GARNET , TRANSPORT PROPERTIES, OSCILLATORS, LANTHANUM COMPOUNDS, FLUORIDES.

Developing an Online Certification Program for Nutrition Education Assistants

ERIC Educational Resources Information Center

Christofferson, Debra; Christensen, Nedra; LeBlanc, Heidi; Bunch, Megan

2012-01-01

Objective: To develop an online certification program for nutrition education paraprofessionals to increase knowledge and confidence and to overcome training barriers of programming time and travel expenses. Design: An online interactive certification course based on Supplemental Nutrition Assistance Program-Education and Expanded Food and…

High energy-density liquid rocket fuel performance

NASA Technical Reports Server (NTRS)

Rapp, Douglas C.

1990-01-01

A fuel performance database of liquid hydrocarbons and aluminum-hydrocarbon fuels was compiled using engine parametrics from the Space Transportation Engine Program as a baseline. Propellant performance parameters are introduced. General hydrocarbon fuel performance trends are discussed with respect to hydrogen-to-carbon ratio and heat of formation. Aluminum-hydrocarbon fuel performance is discussed with respect to aluminum metal loading. Hydrocarbon and aluminum-hydrocarbon fuel performance is presented with respect to fuel density, specific impulse, and propellant density specific impulse.

Performance study of aluminum shielded room for ultra-low-field magnetic resonance imaging based on SQUID: Simulations and experiments

NASA Astrophysics Data System (ADS)

Li, Bo; Dong, Hui; Huang, Xiao-Lei; Qiu, Yang; Tao, Quan; Zhu, Jian-Ming

2018-02-01

Not Available Project supported in part by the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (Grant No. XDB04020200) and in part by the National Natural Science Foundation of China (Grant No. 11204339).

Lessons learned from the scaling-up of a weekly multimicronutrient supplementation program in the integrated food security program (PISA).

PubMed

Lechtig, Aarón; Gross, Rainer; Vivanco, Oscar Aquino; Gross, Ursula; López de Romaña, Daniel

2006-01-01

Weekly multimicronutrient supplementation was initiated as an appropriate intervention to protect poor urban populations from anemia. To identify the lessons learned from the Integrated Food Security Program (Programa Integrado de Seguridad Alimentaria [PISA]) weekly multimicronutrient supplementation program implemented in poor urban populations of Chiclayo, Peru. Data were collected from a 12-week program in which multimicronutrient supplements were provided weekly to women and adolescent girls 12 through 44 years of age and children under 5 years of age. A baseline survey was first conducted. Within the weekly multimicronutrient supplementation program, information was collected on supplement distribution, compliance, biological effectiveness, and cost. Supplementation, fortification, and dietary strategies can be integrated synergistically within a micronutrient intervention program. To ensure high cost-effectiveness of a weekly multimicronutrient supplementation program, the following conditions need to be met: the program should be implemented twice a year for 4 months; the program should be simultaneously implemented at the household (micro), community (meso), and national (macro) levels; there should be governmental participation from health and other sectors; and there should be community and private sector participation. Weekly multimicronutrient supplementation programs are cost effective options in urban areas with populations at low risk of energy deficiency and high risk of micronutrient deficiencies.

An Arts-Based Supplemental Resource's Effect on Teachers' Perceptions of Curriculum Integration, Instructional Materials Development, Learning Activities Selections, and Critical Thinking Improvement

ERIC Educational Resources Information Center

Eutsler, Mark L.

2013-01-01

Indiana's declining SAT scores prompted the publisher of a statewide magazine covering the literary, performing, and visual arts to take action and create a program to use the magazine as a supplemental resource for students. It was believed that such a supplemental resource could enhance critical thinking and writing skills and help raise SAT…

Development of a Criterion-Referenced, Performance-Based Assessment of Reading Comprehension in a Whole Literacy Program.

ERIC Educational Resources Information Center

Tibbetts, Katherine A.; And Others

This paper describes the development of a criterion-referenced, performance-based measure of third grade reading comprehension. The primary purpose of the assessment is to contribute unique and valid information for use in the formative evaluation of a whole literacy program. A secondary purpose is to supplement other program efforts to…

A Randomized Controlled Trial of an Online Relapse Prevention Program for Adolescents in Substance Abuse Treatment

ERIC Educational Resources Information Center

Trudeau, Kimberlee J.; Black, Ryan A.; Kamon, Jody L.; Sussman, Steve

2017-01-01

Background: An Internet-based relapse prevention supplement to adolescent substance abuse treatment programming is a promising modality to reinforce treatment gains and enhance recovery; however, an evidence base is lacking. Objective: To assess the efficacy of the online Navigating my Journey (NmJ) program. Methods: 129 adolescent-aged…

Method of coating an iron-based article

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magdefrau, Neal; Beals, James T.; Sun, Ellen Y.

A method of coating an iron-based article includes a first heating step of heating a substrate that includes an iron-based material in the presence of an aluminum source material and halide diffusion activator. The heating is conducted in a substantially non-oxidizing environment, to cause the formation of an aluminum-rich layer in the iron-based material. In a second heating step, the substrate that has the aluminum-rich layer is heated in an oxidizing environment to oxidize the aluminum in the aluminum-rich layer.

Evidence-Based Supplements for the Enhancement of Athletic Performance.

PubMed

Peeling, Peter; Binnie, Martyn J; Goods, Paul S R; Sim, Marc; Burke, Louise M

2018-03-01

A strong foundation in physical conditioning and sport-specific experience, in addition to a bespoke and periodized training and nutrition program, are essential for athlete development. Once these underpinning factors are accounted for, and the athlete reaches a training maturity and competition level where marginal gains determine success, a role may exist for the use of evidence-based performance supplements. However, it is important that any decisions surrounding performance supplements are made in consideration of robust information that suggests the use of a product is safe, legal, and effective. The following review focuses on the current evidence-base for a number of common (and emerging) performance supplements used in sport. The supplements discussed here are separated into three categories based on the level of evidence supporting their use for enhancing sports performance: (1) established (caffeine, creatine, nitrate, beta-alanine, bicarbonate); (2) equivocal (citrate, phosphate, carnitine); and (3) developing. Within each section, the relevant performance type, the potential mechanisms of action, and the most common protocols used in the supplement dosing schedule are summarized.

Modeling Propagation of Shock Waves in Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howard, W M; Molitoris, J D

2005-08-19

We present modeling results for the propagation of strong shock waves in metals. In particular, we use an arbitrary Lagrange Eulerian (ALE3D) code to model the propagation of strong pressure waves (P {approx} 300 to 400 kbars) generated with high explosives in contact with aluminum cylinders. The aluminum cylinders are assumed to be both flat-topped and have large-amplitude curved surfaces. We use 3D Lagrange mechanics. For the aluminum we use a rate-independent Steinberg-Guinan model, where the yield strength and shear modulus depend on pressure, density and temperature. The calculation of the melt temperature is based on the Lindermann law. Atmore » melt the yield strength and shear modulus is set to zero. The pressure is represented as a seven-term polynomial as a function of density. For the HMX-based high explosive, we use a JWL, with a program burn model that give the correct detonation velocity and C-J pressure (P {approx} 390 kbars). For the case of the large-amplitude curved surface, we discuss the evolving shock structure in terms of the early shock propagation experiments by Sakharov.« less

Modeling Propagation of Shock Waves in Metals

NASA Astrophysics Data System (ADS)

Howard, W. M.; Molitoris, J. D.

2006-07-01

We present modeling results for the propagation of strong shock waves in metals. In particular, we use an arbitrary Lagrange Eulerian (ALE3D) code to model the propagation of strong pressure waves (P ˜ 300 to 400 kbars) generated with high explosives in contact with aluminum cylinders. The aluminum cylinders are assumed to be both flat-topped and have large-amplitude curved surfaces. We use 3D Lagrange mechanics. For the aluminum we use a rate-independent Steinberg-Guinan model, where the yield strength and shear modulus depend on pressure, density and temperature. The calculation of the melt temperature is based on the Lindermann law. At melt the yield strength and shear modulus is set to zero. The pressure is represented as a seven-term polynomial as a function of density. For the HMX-based high explosive, we use a JWL, with a program burn model that give the correct detonation velocity and C-J pressure (P ˜ 390 kbars). For the case of the large-amplitude curved surface, we discuss the evolving shock structure in terms of the early shock propagation experiments by Sakharov.

Heat transfer simulation and retort program adjustment for thermal processing of wheat based Haleem in semi-rigid aluminum containers.

PubMed

Vatankhah, Hamed; Zamindar, Nafiseh; Shahedi Baghekhandan, Mohammad

2015-10-01

A mixed computational strategy was used to simulate and optimize the thermal processing of Haleem, an ancient eastern food, in semi-rigid aluminum containers. Average temperature values of the experiments showed no significant difference (α = 0.05) in contrast to the predicted temperatures at the same positions. According to the model, the slowest heating zone was located in geometrical center of the container. The container geometrical center F0 was estimated to be 23.8 min. A 19 min processing time interval decrease in holding time of the treatment was estimated to optimize the heating operation since the preferred F0 of some starch or meat based fluid foods is about 4.8-7.5 min.

Application of superplastically formed and diffusion bonded aluminum to a laminar flow control leading edge

NASA Technical Reports Server (NTRS)

Goodyear, M. D.

1987-01-01

NASA sponsored the Aircraft Energy Efficiency (ACEE) program in 1976 to develop technologies to improve fuel efficiency. Laminar flow control was one such technology. Two approaches for achieving laminar flow were designed and manufactured under NASA sponsored programs: the perforated skin concept used at McDonnell Douglas and the slotted design used at Lockheed-Georgia. Both achieved laminar flow, with the slotted design to a lesser degree (JetStar flight test program). The latter design had several fabrication problems concerning springback and adhesive flow clogging the air flow passages. The Lockheed-Georgia Company accomplishments is documented in designing and fabricating a small section of a leading edge article addressing a simpler fabrication method to overcome the previous program's manufacturing problems, i.e., design and fabrication using advanced technologies such as diffusion bonding of aluminum, which has not been used on aerospace structures to date, and the superplastic forming of aluminum.

Potential protective effects of extra virgin olive oil on the hepatotoxicity induced by co-exposure of adult rats to acrylamide and aluminum.

PubMed

Ghorbel, Imen; Elwej, Awatef; Jamoussi, Kamel; Boudawara, Tahia; Kamoun, Naziha Grati; Zeghal, Najiba

2015-04-01

Extra virgin olive oil has been shown to be effective against oxidative stress associated diseases. In addition to the high quantities of oleic acid, it is rich in phenolic compounds. We investigated the protective efficacy of extra virgin olive oil (EVOO) against the hepatotoxicity induced by both aluminum and acrylamide. Animals were divided into four groups containing six rats each: group 1, serving as controls, received distilled water; group 2 received drinking water containing aluminum chloride (50 mg kg(-1) body weight) and acrylamide (20 mg kg(-1) body weight) by gavage; group 3 received both aluminum and acrylamide in the same ways as well as EVOO (300 μl) by gavage; group 4 received only EVOO by gavage for 3 weeks. The rats exposed to both aluminum and acrylamide exhibited oxidative stress observed by an increase in MDA, AOPP and a decrease in GSH, NPSH and vitamin C levels. The activities of CAT and GPx were decreased, while SOD activity was increased. The liver metallothioneins, such as MT1 and MT2 genes expression, were also increased. EVOO supplementation improved all the parameters mentioned above. The plasma transaminases (AST and ALT), LDH activities, glucose and albumin levels, TC, LDL-C levels, TC/HDL-C and LDL-C/HDL-C ratios were increased, while high density lipoprotein-cholesterol (HDL-C) and TG decreased. The co-administration of EVOO to acrylamide and aluminum treated rats restored their hepatic markers to near-normal values. Liver histological studies confirmed the biochemical parameters and the beneficial role of EVOO. These results suggest that extra virgin olive oil, when added to the diet, may have a beneficial role in decreasing the liver damage induced by both aluminum and acrylamide.

Aluminum Target Dissolution in Support of the Pu-238 Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

McFarlane, Joanna; Benker, Dennis; DePaoli, David W

2014-09-01

Selection of an aluminum alloy for target cladding affects post-irradiation target dissolution and separations. Recent tests with aluminum alloy 6061 yielded greater than expected precipitation in the caustic dissolution step, forming up to 10 wt.% solids of aluminum hydroxides and aluminosilicates. We present a study to maximize dissolution of aluminum metal alloy, along with silicon, magnesium, and copper impurities, through control of temperature, the rate of reagent addition, and incubation time. Aluminum phase transformations have been identified as a function of time and temperature, using X-ray diffraction. Solutions have been analyzed using wet chemical methods and X-ray fluorescence. These datamore » have been compared with published calculations of aluminum phase diagrams. Temperature logging during the transients has been investigated as a means to generate kinetic and mass transport data on the dissolution process. Approaches are given to enhance the dissolution of aluminum and aluminosilicate phases in caustic solution.« less

78 FR 20411 - Supplemental Nutrition Assistance Program: Nutrition Education and Obesity Prevention Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

..., multi- level interventions; and community and public health approaches. To improve program design... prevention services and an evidence-based approach are provided for States to use in their SNAP-Ed programming. These definitions provide States with greater flexibility to include environmental approaches and...

Accelerated Reader.

ERIC Educational Resources Information Center

Education Commission of the States, Denver, CO.

This paper provides an overview of Accelerated Reader, a system of computerized testing and record-keeping that supplements the regular classroom reading program. Accelerated Reader's primary goal is to increase literature-based reading practice. The program offers a computer-aided reading comprehension and management program intended to motivate…

Formulation and method for preparing gels comprising hydrous aluminum oxide

DOEpatents

Collins, Jack L.

2014-06-17

Formulations useful for preparing hydrous aluminum oxide gels contain a metal salt including aluminum, an organic base, and a complexing agent. Methods for preparing gels containing hydrous aluminum oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including aluminum, an organic base, and a complexing agent.

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 2 2011-07-01 2011-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 2 2013-07-01 2013-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 2 2012-07-01 2012-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

DEMONSTRATION OF LONG-TERM STORAGE CAPABILITY FOR SPENT NUCLEAR FUEL IN L BASIN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sindelar, R.; Deible, R.

2011-04-27

The U.S. Department of Energy decisions for the ultimate disposition of its inventory of used nuclear fuel presently in, and to be received and stored in, the L Basin at the Savannah River Site, and schedule for project execution have not been established. A logical decision timeframe for the DOE is following the review of the overall options for fuel management and disposition by the Blue Ribbon Commission on America's Nuclear Future (BRC). The focus of the BRC review is commercial fuel; however, the BRC has included the DOE fuel inventory in their review. Even though the final report bymore » the BRC to the U.S. Department of Energy is expected in January 2012, no timetable has been established for decisions by the U.S. Department of Energy on alternatives selection. Furthermore, with the imminent lay-up and potential closure of H-canyon, no ready path for fuel disposition would be available, and new technologies and/or facilities would need to be established. The fuel inventory in wet storage in the 3.375 million gallon L Basin is primarily aluminum-clad, aluminum-based fuel of the Materials Test Reactor equivalent design. An inventory of non-aluminum-clad fuel of various designs is also stored in L Basin. Safe storage of fuel in wet storage mandates several high-level 'safety functions' that would be provided by the Structures, Systems, and Components (SSCs) of the storage system. A large inventory of aluminum-clad, aluminum-based spent nuclear fuel, and other nonaluminum fuel owned by the U.S. Department of Energy is in wet storage in L Basin at the Savannah River Site. An evaluation of the present condition of the fuel, and the Structures, Systems, or Components (SSCs) necessary for its wet storage, and the present programs and storage practices for fuel management have been performed. Activities necessary to validate the technical bases for, and verify the condition of the fuel and the SSCs under long-term wet storage have also been identified. The overall conclusion is that the fuel can be stored in L Basin, meeting general safety functions for fuel storage, for an additional 50 years and possibly beyond contingent upon continuation of existing fuel management activities and several augmented program activities. It is concluded that the technical bases and well-founded technologies have been established to store spent nuclear fuel in the L Basin. Methodologies to evaluate the fuel condition and characteristics, and systems to prepare fuel, isolate damaged fuel, and maintain water quality storage conditions have been established. Basin structural analyses have been performed against present NPH criteria. The aluminum fuel storage experience to date, supported by the understanding of the effects of environmental variables on materials performance, demonstrates that storage systems that minimize degradation and provide full retrievability of the fuel up to and greater than 50 additional years will require maintaining the present management programs, and with the recommended augmented/additional activities in this report.« less

Characterization of Friction Joints Subjected to High Levels of Random Vibration

NASA Technical Reports Server (NTRS)

deSantos, Omar; MacNeal, Paul

2012-01-01

This paper describes the test program in detail including test sample description, test procedures, and vibration test results of multiple test samples. The material pairs used in the experiment were Aluminum-Aluminum, Aluminum- Dicronite coated Aluminum, and Aluminum-Plasmadize coated Aluminum. Levels of vibration for each set of twelve samples of each material pairing were gradually increased until all samples experienced substantial displacement. Data was collected on 1) acceleration in all three axes, 2) relative static displacement between vibration runs utilizing photogrammetry techniques, and 3) surface galling and contaminant generation. This data was used to estimate the values of static friction during random vibratory motion when "stick-slip" occurs and compare these to static friction coefficients measured before and after vibration testing.

Examination of facilitators and barriers to home-based supplemental feeding with ready-to-use food for underweight children in western Uganda

PubMed Central

Jilcott, Stephanie B.; Myhre, Jennifer A.; Adair, Linda S.; Thirumurthy, Harsha; Bentley, Margaret E.; Ammerman, Alice S.

2013-01-01

Poor complementary feeding practices and low quality complementary foods are significant causes of growth faltering and child mortality throughout the developing world. Ready-to-use foods (RUF) are energy dense, lipid-based products that do not require cooking or refrigeration, that have been used to prevent and treat malnutrition among vulnerable children. The effectiveness of these products in improving child nutritional status depends on household use by caregivers. To identify the key facilitators and barriers that influence appropriate in-home RUF consumption by supplemental feeding program beneficiaries, we conducted individual interviews among caregivers (n=80), RUF producers (n=8) and program staff (n=10) involved in the Byokulia Bisemeye mu Bantu (BBB) supplemental feeding program in Bundibugyo, Uganda. By documenting caregiver perceptions and feeding practices related to RUF, we developed a conceptual framework of factors that affect appropriate feeding with RUF. Findings suggest that locally produced RUF is well received by caregivers and children, and is perceived by caregivers and the community to be a healthy supplemental food for malnourished children. However, child feeding practices, including sharing of RUF within households, compromise the nutrient delivery to the intended child. Interventions and educational messages informed by this study can help to improve RUF delivery to targeted beneficiaries. PMID:22136223

Fabrication process scale-up and optimization for a boron-aluminum composite radiator

NASA Technical Reports Server (NTRS)

Okelly, K. P.

1973-01-01

Design approaches to a practical utilization of a boron-aluminum radiator for the space shuttle orbiter are presented. The program includes studies of laboratory composite material processes to determine the feasibility of a structural and functional composite radiator panel, and to estimate the cost of its fabrication. The objective is the incorporation of boron-aluminum modulator radiator on the space shuttle.

Heat Pipe Materials Compatibility

NASA Technical Reports Server (NTRS)

Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

1976-01-01

An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes.

Opportunities for improving maternal nutrition and birth outcomes: synthesis of country experiences.

PubMed

Mason, John B; Saldanha, Lisa S; Ramakrishnan, Usha; Lowe, Alyssa; Noznesky, Elizabeth A; Girard, Amy Webb; McFarland, Deborah A; Martorell, Reynaldo

2012-06-01

Undernutrition in women in poor countries remains prevalent and affects maternal, neonatal and child health (MNCH) outcomes. Improving MNCH outcomes requires better policies and programs that enhance women's nutrition. The studies aimed to better understand awareness, perceptions, barriers to intervention, and policy and program priorities and approaches, through different platforms, addressing three related priority problems: anemia, intra-uterine growth retardation (IUGR), and maternal thinness and stunting (including incomplete growth with early pregnancy). Results of a global literature review on program effectiveness, and from case studies in Ethiopia, India, and Nigeria, were synthesized. Anemia can be reduced by iron-folate supplementation, but all aspects for successful implementation, from priority to resources to local capacity, require strengthening. For IUGR, additional interventions, offood supplementation or cash transfers, may be required for impact, plus measures to combat early pregnancy. Breaking the intergenerational cycle of women's undernutrition may also be helped by child nutrition programs. Potential interventions exist and need to be built on: iron-folate and multiple micronutrient supplementation, food fortification (including iodized salt),food supplementation and/or cash transfer programs, combatting early pregnancy, infant and young child nutrition. Potential platforms are: the health system especially antenatal care, community-based nutrition programs (presently usually child-oriented but can be extended to women), child health days, safety net programs, especially cash transfer and conditional cash transfer programs. Making these more effective requires system development and organization, capacity and training, technical guidelines and operational research, and advocacy (who takes the lead?), information, monitoring and evaluation.

Models of MOS and SOS devices

NASA Technical Reports Server (NTRS)

Gassaway, J. D.; Mahmood, Q.; Trotter, J. D.

1980-01-01

Quarterly report describes progress in three programs: dc sputtering machine for aluminum and aluminum alloys; two dimensional computer modeling of MOS transistors; and development of computer techniques for calculating redistribution diffusion of dopants in silicon on sapphire films.

Ceramic regenerator systems development program

NASA Technical Reports Server (NTRS)

Fucinari, C. A.; Rahnke, C. J.; Rao, V. D. N.; Vallance, J. K.

1980-01-01

The DOE/NASA Ceramic Regenerator Design and Reliability Program aims to develop ceramic regenerator cores that can be used in passenger car and industrial/truck gas turbine engines. The major cause of failure of early gas turbine regenerators was found to be chemical attack of the ceramic material. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability test in Ford 707 industrial gas turbine engines late in 1974. Results of 53,065 hours of turbine engine durability testing are described. Two materials, aluminum silicate and magnesium aluminum silicate, show promise. Five aluminum silicate cores attained the durability objective of 10,000 hours at 800 C (1472 F). Another aluminum silicate core shows minimal evidence of chemical attack after 8071 hours at 982 C (1800 F). Results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are included.

Regional Monitoring of Acidic Lakes and Streams

EPA Pesticide Factsheets

This asset provides data on the acid-base status of lakes and streams. Key chemical indicators measured include: sulfate, nitrate, ammonium, chloride, Acid Neutralizing Capacity (ANC), pH, base cations, dissolved organic carbon (DOC), total aluminum. TIME and LTM are part of EPA's Environmental Monitoring and Assessment Program (EMAP). Long-term monitoring of the acid-base status (pH, ANC, SO4, NO3, NH4, DOC, base cations, Al) in lakes and streams. Monitoring is conducted in acid sensitive regions of the Eastern U.S.

Chemical Dynamics of nano-Aluminum and Iodine Based Oxidizers

NASA Astrophysics Data System (ADS)

Little, Brian; Ridge, Claron; Overdeep, Kyle; Slizewski, Dylan; Lindsay, Michael

2017-06-01

As observed in previous studies of nanoenergetic powder composites, micro/nano-structural features such as particle morphology and/or reactant spatial distance are expected to strongly influence properties that govern the combustion behavior of energetic materials (EM). In this study, highly reactive composites containing crystalline iodine (V) oxide or iodate salts with nano-sized aluminum (nAl) were blended by two different processing techniques and then collected as a powder for characterization. Physiochemical techniques such as thermal gravimetric analysis, calorimetry, X-ray diffraction, electron microscopy, high speed photography, pressure profile analysis, temperature programmed reactions, and spectroscopy were employed to characterize these EM with emphasis on correlating the chemical reactivity with inherent structural features and variations in stoichiometry. This work is a continuation of efforts to probe the chemical dynamics of nAl-iodine based composites.

Crystallization of aluminum hydroxide in the aluminum-air battery: Literature review, crystallizer design and results of integrated system tests

NASA Astrophysics Data System (ADS)

Maimoni, A.

1988-03-01

The literature on aluminum trihydroxide crystallization is reviewed and the implications of crystallization on the design and performance of the aluminum-air battery are illustrated. Results of research on hydrargillite crystallization under battery operating conditions at Alcoa Laboratories, Alcan Kingston Laboratories, and Lawrence Livermore National Laboratory are summarized and are applied to the design of an electrolyte management system using lamella settlers for clarification of the electrolyte and product separation. The design principles were validated in a series of experiments that, for the first time in the aluminum-air program, demonstrated continuous operation of an integrated system consisting of cells, crystallizer, and a product-removal system.

Federal Student Aid Handbook, 2002-2003. Volume 4: Campus-Based Common Provisions.

ERIC Educational Resources Information Center

Office of Federal Student Aid (ED), Washington, DC.

The Federal Perkins Loan, Federal Supplemental Educational Opportunity Grant (FSEOG), and Federal Work-Study (FWS) programs are called "campus-based" programs because each school is responsible for administering them on its own campus. A school applies for and receives funds from the U.S. Department of Education, and the school's…

Proceedings of the USAF Structural Integrity Program Conference Held in 11-13 December 1990 in San Antonio, Texas

DTIC Science & Technology

1991-08-01

mill 3 dp Chromic Anodizing plus Polyurethane Fuel Coating 2 ep Sulfuric Acid Anodizing 1 Alloys other than aluminums require independent evaluation...generators for recircula- aluminum . During manufactur- tion. After peening, the ing, the iron is removed anodic coating and paint were prior to the...Growth Retardation in Aluminum Alloys . . 310 Quality Nondestructive Evaluation, and the ". .. IP’ Process

US-Korea Nanotechnology, Biotechnology, and Information Technology (NBIT) Symbiosys Program - Phase 1

DTIC Science & Technology

2010-10-01

diameter, length, and spacing. Fabrication Technology: Synthesis of self-organized AAO ( Anodic aluminum oxide ) templates with controlled diameter...nanowires arrayed in anodized aluminum oxide ( AAO ) templates and the diameter is precisely controlled by using atomic layer deposition (ALD) process...Jin, “Highly Self-assembled Nanotubular Aluminum Oxide by Hard Anodization ”, J. Mater. Res. (in press, December 2010). 3. J.Y. Kim, K. Noh, C. Choi

Proceedings of the USAF Structural Integrity Program Conference Held in San Antonio, Texas on 2-6 December 1991

DTIC Science & Technology

1992-07-01

NONDESTRUCTIVE INSPECTION Probabilistic Durability Evaluation of Alcoa 7050 Aluminum ............................... 305 Composite Repair of Aircraft Structures... Aluminum J.G. Burns, WLIFIBEC 0900-0930 Composite Repair of Aircraft Structures - The Australian Experience L. Molent, Aeronautical Research Laboratory...fatigue test articles consisted of a of 5 percent from the calculated airframe ratio of 2124-T851 aluminum specimen surrounded by 0.882, to preclude

Society of Behavioral Medicine (SBM) position statement: SBM urges Congress to preserve and increase the financing of federally funded nutrition assistance programs and services.

PubMed

Behrman, Pamela; Demirci, Jill; Yanez, Betina; Beharie, Nisha; Laroche, Helena

2018-05-03

Deep cuts have been proposed to federally funded nutrition assistance programs, including the Supplemental Nutrition Assistance Program (SNAP); the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC); and federally subsidized school breakfast and lunch programs. Yet, these programs help parents afford healthy meals for their families, pregnant and postpartum mothers access supplemental foods and health services for themselves and their infants and young children, and children obtain the nutrition necessary for optimal school performance. Participation in these programs is linked with reductions in perinatal morbidity and mortality, improved childhood growth trajectories, enhanced school performance, and reductions in food insecurity and poverty. Given these compelling health and economic benefits, the Society of Behavioral Medicine urges Congress to protect and increase funding for federally funded nutrition assistance programs, specifically SNAP, WIC, and school breakfast and lunch programs. Per the recent (2017) recommendations of the School Nutrition Association, Congress should also resist any attempts to "block-grant" subsidized school breakfast and lunch programs, which could reduce access to these programs. It is further recommended that Congress improve the scope of implementation- and outcomes-based assessments of these programs. Finally, we recommend efforts to increase awareness of and participation in SNAP, WIC, and federally funded school meal programs for eligible individuals, children, and families.

Characterization of Al 2219 material for the application of the spin-forming-process

NASA Astrophysics Data System (ADS)

Mueller-Wiesner, D.; Sieger, E.; Ernsberger, K.

1991-10-01

The shells of the propellant tanks of the Ariane 5 EPS stage are to be manufactured by the spin forming process. The material for the shells (hemispheres) is the aluminum alloy 2219. By a material characterization program optimized parameters for the application of the forming process starting from different material conditions (T31 temper and '0' condition) are determined. Based on the results of this program it was decided to start spin forming in the '0' condition for flight hardware.

76 FR 16599 - Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility Guidelines AGENCY: Food and Nutrition Service... Special Supplemental Nutrition Program for Women, Infants and Children Program (WIC). These income...

40 CFR 62.4353 - Identification of sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Identification of sources. 62.4353 Section 62.4353 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Southwire Aluminum, Hawesville, Ky. (b) Anaconda Company, Aluminum Division, Henderson, Ky. Fluoride...

40 CFR 62.4353 - Identification of sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Identification of sources. 62.4353 Section 62.4353 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Southwire Aluminum, Hawesville, Ky. (b) Anaconda Company, Aluminum Division, Henderson, Ky. Fluoride...

40 CFR 62.4353 - Identification of sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Identification of sources. 62.4353 Section 62.4353 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Southwire Aluminum, Hawesville, Ky. (b) Anaconda Company, Aluminum Division, Henderson, Ky. Fluoride...

Stress Corrosion Cracking of Certain Aluminum Alloys

NASA Technical Reports Server (NTRS)

Hasse, K. R.; Dorward, R. C.

1983-01-01

SC resistance of new high-strength alloys tested. Research report describes progress in continuing investigation of stress corrosion (SC) cracking of some aluminum alloys. Objective of program is comparing SC behavior of newer high-strength alloys with established SC-resistant alloy.

Study to determine peening stress profile of rod peened aluminum structural alloys versus shot peened material

NASA Technical Reports Server (NTRS)

Rosas, R. E.; Calfin, B. G.

1976-01-01

The objective of this program was to determine the peening stress profiles of rod peened aluminum structural alloys versus shot peened material to define the effective depth of the compressed surface layer.

Changes in the Supplementation Practices of Elite Australian Swimmers Over 11 Years.

PubMed

Shaw, Gregory; Slater, Gary; Burke, Louise M

2016-12-01

Thirty nine elite Australian swimmers (13 AIS, 26 OTHER) completed a standardized questionnaire regarding their supplement use during a pre competition camp. The data were compared with a similar study conducted 11 years earlier (11 AIS, 23 OTHER) and framed around the classification system of the Sport Supplement Program of the Australian Institute of Sport. The prevalence of supplement use remained constant over time (2009: 97%, 1998: 100%). However, the current swimmers used a greater number of dietary supplements (9.2 ± 3.7 and 5.9 ± 2.9; p = .001), accounted for by an increase in the reported use of supplements with a greater evidence base (Sports Foods, Ergogenics, and Group B supplements). In contrast, fewer supplements considered less reputable (Group C and D) were reported by the 2009 cohort (0.7 ± 1.0 and 1.6 ± 1.3; p = .003). AIS swimmers reported a greater use of Ergogenics (4.3 ± 1.8 and 3.1 ± 1.7; p = .002), and less use of Group C and D supplements overall (0.8 ± 1.2 and 1.3 ± 1.2; p = .012), which was explained primarily by a smaller number of these supplements reported by the 2009 group (1998 AIS: 1.5 ± 1.4, 2009 AIS: 0.2 ± 0.6; p = .004). Although the prevalence of supplement use has not changed over time, there has been a significant increase in the number and type of products they are using. The potential that these changes can be attributed to a Sports Supplement Program merit investigation.

A Critical Assessment of the Aluminum Cartridge Case Failure Mechanism

DTIC Science & Technology

1976-03-01

achievements of an exploratory development program at Frankford Arsenal. The program was initiated to determine the engineering parameters required for...third that of brass cases, are ideal for improving the combat load effectiveness of an infantryman, a combat vehicle or a gunship« To enable...damage sus- tained by aluminum cartridge cases during "burn-through". A more accurate method of determining the effect of "burn- through" in a

FY 1998 Proposed Rail Improvement Program Supplement

DOT National Transportation Integrated Search

1997-01-01

This FY 1998 Proposed Rail Improvement Program Supplement contains those rail plan amendments which have been published subsequent to the FY 1997 Proposed Rail Improvement program supplement. This document also contains the benefit/cost methodology u...

Investigation of Coatings Which Prevent Molten Aluminum/Water Explosions

NASA Astrophysics Data System (ADS)

León, D. D.; Richter, R. T.; Levendusky, T. L.

The Aluminum Association contracted Alcoa in 1995 to identify and test new protective coatings for casting pits as a replacement for Porter International's 7001 (Tarset Standard). Three new coatings have been identified through a series of selection criteria including: 1) A standardized splash test used to evaluate personal protective clothing, 2) An industry-standard molten metal explosion test, 3) A multiple-exposure test to measure durability, and 4) An external shock impact test. The results of this program will be reviewed. This study only tested protective coatings at the "in-service cure time", as defined by the manufacturer. These curing times can be excessive for a production casting facility. The Aluminum Association has contracted Alcoa in a second program to investigate the effect of reduced cure times on adhesion and their effectiveness in preventing molten metal/water explosions. A status update of this new two year program is provided.

Processing eutectics in space

NASA Technical Reports Server (NTRS)

Douglas, F. C.; Galasso, F. S.

1974-01-01

Experimental work is reported which was directed toward obtaining interface shape control while a numerical thermal analysis program was being made operational. An experimental system was developed in which the solid-liquid interface in a directionally solidified aluminum-nickel eutectic could be made either concave to the melt or convex to the melt. This experimental system provides control over the solid-liquid interface shape and can be used to study the effect of such control on the microstructure. The SINDA thermal analysis program, obtained from Marshall Space Flight Center, was used to evaluate experimental directional solidification systems for the aluminum-nickel and the aluminum-copper eutectics. This program was applied to a three-dimensional ingot, and was used to calculate the thermal profiles in axisymmetric heat flow. The results show that solid-liquid interface shape control can be attained with physically realizable thermal configurations and the magnitudes of the required thermal inputs were indicated.

Adapting Evidence-Based Teen Pregnancy Programs to Be LGBT-Inclusive: Lessons Learned.

PubMed

Boyce, Karen Stradford; Travers, Madeline; Rothbart, Betty; Santiago, Vivian; Bedell, Jane

2018-05-01

Lesbian, gay, bisexual, and transgender (LGBT) youth show higher rates of sexual risk behaviors than heterosexual and cisgender youth; yet, most school-based sexual health education is largely heteronormative and cisnormative and does not recognize the spectrum of sexual and gender identity. New York City's Departments of Health and Education collaborated to create an LGBT-inclusive supplement to the Reducing the Risk curriculum and implement it in 21 South Bronx high schools. Teachers completed an electronic survey to report the number of students reached and an online log to measure curriculum adherence. Students were administered an anonymous 74-item pre- and posttest to measure demographics, sexual health knowledge, and student satisfaction with the curriculum. Chi-square and t tests were used to assess differences in student demographics and changes in knowledge scores. Reducing the Risk was implemented in 21 schools reaching 230 classes and 5,673 students; with 161 classes receiving the supplement. Teachers reported completing an average of 70% of LGBT supplement activities. Students who received the supplement reported higher satisfaction and greater knowledge scores than students who did not. New York City experience shows that being more inclusive of LGBT teens while implementing preexisting evidence-based sexual and reproductive health programs is possible and replicable.

Process for strengthening aluminum based ceramics and material

DOEpatents

Moorhead, Arthur J.; Kim, Hyoun-Ee

2000-01-01

A process for strengthening aluminum based ceramics is provided. A gaseous atmosphere consisting essentially of silicon monoxide gas is formed by exposing a source of silicon to an atmosphere consisting essentially of hydrogen and a sufficient amount of water vapor. The aluminum based ceramic is exposed to the gaseous silicon monoxide atmosphere for a period of time and at a temperature sufficient to produce a continuous, stable silicon-containing film on the surface of the aluminum based ceramic that increases the strength of the ceramic.

77 FR 17006 - Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility Guidelines AGENCY: Food and Nutrition Service (FNS... Special Supplemental Nutrition Program for Women, Infants and Children Program (WIC). These income...

Dietary supplements for aquatic sports.

PubMed

Derave, Wim; Tipton, Kevin D

2014-08-01

Many athletes use dietary supplements, with use more prevalent among those competing at the highest level. Supplements are often self-prescribed, and their use is likely to be based on an inadequate understanding of the issues at stake. Supplementation with essential micronutrients may be useful when a diagnosed deficiency cannot be promptly and effectively corrected with food-based dietary solutions. When used in high doses, some supplements may do more harm than good: Iron supplementation, for example, is potentially harmful. There is good evidence from laboratory studies and some evidence from field studies to support health or performance benefits from appropriate use of a few supplements. The available evidence from studies of aquatic sports is small and is often contradictory. Evidence from elite performers is almost entirely absent, but some athletes may benefit from informed use of creatine, caffeine, and buffering agents. Poor quality assurance in some parts of the dietary supplements industry raises concerns about the safety of some products. Some do not contain the active ingredients listed on the label, and some contain toxic substances, including prescription drugs, that can cause health problems. Some supplements contain compounds that will cause an athlete to fail a doping test. Supplement quality assurance programs can reduce, but not entirely eliminate, this risk.

7 CFR 246.8 - Nondiscrimination.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... instructions to ensure that no person shall, on the grounds of race, color, national origin, age, sex or... handling complaints based on sex and handicap. (b) Complaints. Persons seeking to file discrimination...

7 CFR 246.8 - Nondiscrimination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... instructions to ensure that no person shall, on the grounds of race, color, national origin, age, sex or... handling complaints based on sex and handicap. (b) Complaints. Persons seeking to file discrimination...

7 CFR 246.8 - Nondiscrimination.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... instructions to ensure that no person shall, on the grounds of race, color, national origin, age, sex or... handling complaints based on sex and handicap. (b) Complaints. Persons seeking to file discrimination...

7 CFR 246.8 - Nondiscrimination.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... instructions to ensure that no person shall, on the grounds of race, color, national origin, age, sex or... handling complaints based on sex and handicap. (b) Complaints. Persons seeking to file discrimination...

7 CFR 246.8 - Nondiscrimination.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... instructions to ensure that no person shall, on the grounds of race, color, national origin, age, sex or... handling complaints based on sex and handicap. (b) Complaints. Persons seeking to file discrimination...

25 CFR 39.107 - Are schools allotted supplemental funds for special student and/or school costs?

Code of Federal Regulations, 2011 CFR

2011-04-01

... INTERIOR EDUCATION THE INDIAN SCHOOL EQUALIZATION PROGRAM Indian School Equalization Formula Base and... size §§ 39.140 through 39.156 Geographic isolation of the school § 39.160 Gifted and Talented Programs ...

25 CFR 39.107 - Are schools allotted supplemental funds for special student and/or school costs?

Code of Federal Regulations, 2010 CFR

2010-04-01

... INTERIOR EDUCATION THE INDIAN SCHOOL EQUALIZATION PROGRAM Indian School Equalization Formula Base and... size §§ 39.140 through 39.156 Geographic isolation of the school § 39.160 Gifted and Talented Programs ...

7 CFR 250.66 - Special Supplemental Nutrition Program for Women, Infants and Children.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Special Supplemental Nutrition Program for Women... (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD... ITS JURISDICTION Household Programs § 250.66 Special Supplemental Nutrition Program for Women, Infants...

7 CFR 250.66 - Special Supplemental Nutrition Program for Women, Infants and Children.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 4 2011-01-01 2011-01-01 false Special Supplemental Nutrition Program for Women... (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD... ITS JURISDICTION Household Programs § 250.66 Special Supplemental Nutrition Program for Women, Infants...

7 CFR 250.66 - Special Supplemental Nutrition Program for Women, Infants and Children.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 4 2013-01-01 2013-01-01 false Special Supplemental Nutrition Program for Women... (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD... ITS JURISDICTION Household Programs § 250.66 Special Supplemental Nutrition Program for Women, Infants...

7 CFR 250.66 - Special Supplemental Nutrition Program for Women, Infants and Children.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 4 2014-01-01 2014-01-01 false Special Supplemental Nutrition Program for Women... (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD... ITS JURISDICTION Household Programs § 250.66 Special Supplemental Nutrition Program for Women, Infants...

7 CFR 250.66 - Special Supplemental Nutrition Program for Women, Infants and Children.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 4 2012-01-01 2012-01-01 false Special Supplemental Nutrition Program for Women... (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD... ITS JURISDICTION Household Programs § 250.66 Special Supplemental Nutrition Program for Women, Infants...

75 FR 15603 - Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Vendor Cost...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... Supplemental Nutrition Program for Women, Infants and Children (WIC): Vendor Cost Containment AGENCY: Food and... Nutrition Program for Women, Infants and Children (WIC): Vendor Cost Containment.'' DATES: Effective Date... Supplemental Nutrition Program for Women, Infants and Children (WIC): Vendor Cost Containment,'' 74 FR 51745...

Students Helping Students: Evaluating a Pilot Program of Peer Teaching for an Undergraduate Course in Human Anatomy

ERIC Educational Resources Information Center

Bruno, Paul A.; Love Green, Jennifer K.; Illerbrun, Sara L.; Holness, Duncan A.; Illerbrun, Samantha J.; Haus, Kara A.; Poirier, Sylvianne M.; Sveinson, Katherine L.

2016-01-01

The educational literature generally suggests that supplemental instruction (SI) is effective in improving academic performance in traditionally difficult courses. A pilot program of peer teaching based on the SI model was implemented for an undergraduate course in human anatomy. Students in the course were stratified into three groups based on…

Student Financial Aid Handbook, 2001-2002. Volume 4: Campus-Based Common Provisions.

ERIC Educational Resources Information Center

Department of Education, Washington, DC. Student Financial Assistance.

The Federal Perkins Loan, Federal Supplemental Educational Opportunity Grant (FSEOG), and Federal Work-Study (FWS) programs are called "campus-based" programs because each school is responsible for administering them on its own campus. A school applies for and receives funds direct from the U.S. Department of Education, and the school's…

Student Financial Aid Handbook, 2000-2001. Volume 4: Campus-Based Common Provisions.

ERIC Educational Resources Information Center

Department of Education, Washington, DC. Student Financial Assistance.

The Federal Perkins Loan, Federal Supplemental Educational Opportunity Grant (FSEOG), and Federal Work-Study (FWS) programs are called "campus-based" programs because each school is responsible for administering them on its own campus. A school applies for and receives funds direct from the U.S. Department of Education, and the school's…

Boron/aluminum skins for the DC-10 aft pylon

NASA Technical Reports Server (NTRS)

Elliott, S. Y.

1975-01-01

Boron/aluminum pylon boat tail skins were designed and fabricated and installed on the DC-10 aircraft for a 5-year flight service demonstration test. Inspection and tests of the exposed skins will establish the ability of the boron/aluminum composite to withstand long time flight service conditions, which include exposure to high temperatures, sonic fatigue, and flutter. The results of a preliminary testing program yield room temperature and elevated temperature data on the tension, compression, in-plane shear, interlaminar shear, bolt bearing, and tension fatigue properties of the boron/aluminum laminates. Present technology was used in the fabrication of the skins. Although maximum weight saving was not sought, weight of the constant thickness boron/aluminum skin is 26% less than the chemically milled titanium skin.

Enhancing the ecological and operational characteristics of water treatment units at TPPs based on baromembrane technologies

NASA Astrophysics Data System (ADS)

Chichirova, N. D.; Chichirov, A. A.; Filimonova, A. A.; Saitov, S. R.

2017-12-01

The innovative baromembrane technologies for water demineralization were introduced at Russian TPPs more than 25 years ago. While being used in the power engineering industry of Russia, these technologies demonstrated certain advantages over the traditional ion-exchange and thermal technologies of makeup water treatment for steam boilers. Water treatment units based on the baromembrane technology are compact, easy to operate, and highly automated. The experience gained from the use of these units shows that their reliability depends directly on preliminary water treatment. The popular water pretreatment technology with coagulation by aluminum oxychloride proved to be inefficient during the seasonal changes of source water quality that occurs at some stations. The use of aluminum coagulant at pH 8 and higher does not ensure the stable and qualitative pretreatment regime: soluble aluminum forms slip on membranes of the ultrafiltration unit, thereby causing pollution and intoxication as well as leading to structural damages or worsening of mechanical properties of the membranes. The problem of increased pH and seasonal changes of the source water quality can be solved by substitution of the traditional coagulant into a new one. To find the most successful coagulant for water pretreatment, experiments have been performed on both qualitative and quantitative analysis of the content of natural organic matters in the Volga water and their structure. We have developed a software program and measured the concentrations of soluble aluminum and iron salts at different pH values of the source water. The analysis of the obtained results has indicated that iron sulfate at pH 6.0-10.2, in contrast to aluminum oxychloride, is not characterized by increased solubility. Thus, the basic process diagrams of water pretreatment based on baromembrane technologies with pretreatment through coagulation by iron salts and wastewater amount reducing from 60-40 to 5-2% have been introduced for thermal power stations.

Individually and Combined Water-Based Exercise With Ginger Supplement, on Systemic Inflammation and Metabolic Syndrome Indices, Among the Obese Women With Breast Neoplasms.

PubMed

Karimi, Niloofar; Dabidi Roshan, Valiollah; Fathi Bayatiyani, Zohreh

2015-12-01

Breast neoplasms has known as the most common cancer among the women worldwide, and relationship between obesity, metabolic syndrome, inflammation and cancer has been recognized since many years ago. The aim of this study was to determine the individual and concomitant effect of 6-weeks water-based exercise and oral ginger supplement on markers that have related to metabolic syndrome and systemic inflammation in obese women with breast neoplasms. Forty women whose have diagnosed with breast neoplasms have volunteered to participate in the study. Subjects have randomly assigned into four groups; placebo, exercise training, ginger supplement and exercise training+ ginger supplement groups. Subjects in the ginger supplement group and the exercise training+ ginger supplement group have orally received 4 capsules, 7 days a week and for 6 weeks. The water-based exercise training program have collected at a progressive intensity and time, have ranged from 50% to 75% of heart rate reserve, in a pool, 4 times a week for 6 weeks. Fasting blood sampling has collected at the pretest and post-test. The ginger supplementation and the water-base exercise have resulted in a reduction of hs-CRP, IL-10, insulin, glucose, insulin resistance, LDL-C, TG; but an increase in HDL-C and HDL-C/LDL-C. The water-base exercise and ginger supplement group have significantly shown larger positive effect in all outcomes, in comparison with the water-base exercise or ginger supplement alone groups. Findings have suggested that obese breast neoplasms survivors have commonly shown metabolic syndrome and elevated inflammation, which placed them at an increased risk for cardiovascular diseases. Moreover, data has indicated a protective effect of the nondrug strategies, such as water-base exercise and ginger supplementation have played an important role in pathogenesis of inflammatory and metabolic responses, among diagnosed breast neoplasms.

Health economic potential of early nutrition programming: a model calculation of long-term reduction in blood pressure and related morbidity costs by use of long-chain polyunsaturated fatty acid-supplemented formula.

PubMed

Straub, Niels; Grunert, Philipp; von Kries, Rüdiger; Koletzko, Berthold

2011-12-01

The reported effect sizes of early nutrition programming on long-term health outcomes are often small, and it has been questioned whether early interventions would be worthwhile in enhancing public health. We explored the possible health economic consequences of early nutrition programming by performing a model calculation, based on the only published study currently available for analysis, to evaluate the effects of supplementing infant formula with long-chain polyunsaturated fatty acids (LC-PUFAs) on lowering blood pressure and lowering the risk of hypertension-related diseases in later life. The costs and health effects of LC-PUFA-enriched and standard infant formulas were compared by using a Markov model, including all relevant direct and indirect costs based on German statistics. We assessed the effect size of blood pressure reduction from LC-PUFA-supplemented formula, the long-term persistence of the effect, and the effect of lowered blood pressure on hypertension-related morbidity. The cost-effectiveness analysis showed an increased life expectancy of 1.2 quality-adjusted life-years and an incremental cost-effectiveness ratio of -630 Euros (discounted to present value) for the LC-PUFA formula in comparison with standard formula. LC-PUFA nutrition was the superior strategy even when the blood pressure-lowering effect was reduced to the lower 95% CI. Breastfeeding is the recommended feeding practice, but infants who are not breastfed should receive an appropriate infant formula. Following this model calculation, LC-PUFA supplementation of infant formula represents an economically worthwhile prevention strategy, based on the costs derived from hypertension-linked diseases in later life. However, because our analysis was based on a single randomized controlled trial, further studies are required to verify the validity of this thesis.

Touching Hearts, Touching Minds: Using Emotion-Based Messaging to Promote Healthful Behavior in the Massachusetts WIC Program

ERIC Educational Resources Information Center

Colchamiro, Rachel; Ghiringhelli, Kara; Hause, Judith

2010-01-01

The "Touching Hearts, Touching Minds" initiative was funded through a 2003 United States Department of Agriculture Special Projects grant to revitalize nutrition education and services in the Massachusetts Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) Program. The 30 nutrition education materials and…

76 FR 5787 - Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... DEPARTMENT OF EDUCATION [CFDA Nos. 84.038, 84.033, and 84.007] Federal Perkins Loan, Federal Work... for the campus-based programs. SUPPLEMENTARY INFORMATION: The Federal Perkins Loan, Federal Work-Study.... The Work Colleges Program The Work Colleges September 30, Report of 2010-2011 award Program Report can...

The response of high and low polyamine producing cell lines to aluminum and calcium stress

Treesearch

Sridev Mohapatra; Smita Cherry; Rakesh Minocha; Rajtilak Majumdar; Palaniswamy Thangavel; Stephanie Long; Subhash C. Minocha

2010-01-01

The diamine putrescine (Put) has been shown to accumulate in tree leaves in response to high Al and low Ca in the soil, leading to the suggestion that this response may provide a physiological advantage to leaf cells under conditions of Al stress. The increase in Put is reversed by Ca supplementation in the soil. Using two cell lines of poplar (Populus nigra...

Toxic Element Contamination of Natural Health Products and Pharmaceutical Preparations

PubMed Central

Genuis, Stephen J.; Schwalfenberg, Gerry; Siy, Anna-Kristen J.; Rodushkin, Ilya

2012-01-01

Background Concern has recently emerged regarding the safety of natural health products (NHPs)–therapies that are increasingly recommended by various health providers, including conventional physicians. Recognizing that most individuals in the Western world now consume vitamins and many take herbal agents, this study endeavored to determine levels of toxic element contamination within a range of NHPs. Methods Toxic element testing was performed on 121 NHPs (including Ayurvedic, traditional Chinese, and various marine-source products) as well as 49 routinely prescribed pharmaceutical preparations. Testing was also performed on several batches of one prenatal supplement, with multiple samples tested within each batch. Results were compared to existing toxicant regulatory limits. Results Toxic element contamination was found in many supplements and pharmaceuticals; levels exceeding established limits were only found in a small percentage of the NHPs tested and none of the drugs tested. Some NHPs demonstrated contamination levels above preferred daily endpoints for mercury, cadmium, lead, arsenic or aluminum. NHPs manufactured in China generally had higher levels of mercury and aluminum. Conclusions Exposure to toxic elements is occurring regularly as a result of some contaminated NHPs. Best practices for quality control–developed and implemented by the NHP industry with government oversight–is recommended to guard the safety of unsuspecting consumers. PMID:23185404

Method For Improving The Oxidation Resistance Of Metal Substrates Coated With Thermal Barrier Coatings

DOEpatents

Thompson, Anthony Mark; Gray, Dennis Michael; Jackson, Melvin Robert

2003-05-13

A method for providing a protective coating on a metal-based substrate is disclosed. The method involves the application of an aluminum-rich mixture to the substrate to form a discontinuous layer of aluminum-rich particles, followed by the application of a second coating over the discontinuous layer of aluminum-rich particles. Aluminum diffuses from the aluminum-rich layer into the substrate, and into any bond coat layer which is subsequently applied. Related articles are also described. A method for providing a protective coating on a metal-based substrate is disclosed. The method involves the application of an aluminum-rich mixture to the substrate to form a discontinuous layer of aluminum-rich particles, followed by the application of a second coating over the discontinuous layer of aluminum-rich particles. Aluminum diffuses from the aluminum-rich layer into the substrate, and into any bond coat layer which is subsequently applied. Related articles are also described.

[The Research on Optic Fiber FBG Corrosion Sensor Based on the Analysis of the Spectral Characteristics].

PubMed

Zhang, Jun; Zeng, Jie; Wang, Bo; Wang, Wen-juan; Liang, Da-kai; Liu, Xiao-ying

2016-03-01

Aiming at meeting the need of aluminum corrosion monitoring in aerospace field, a pre-load type fiber grating corrosion sensor based on an aluminum thin tube structure is proposed. The corrosion sensor of aluminum alloy structure in-service monitoring mechanism is studied, a theoretical model about the relation of FBG reflection spectral characteristics and aluminum thickness variation is also obtained. Optical fiber grating corrosion monitoring test system based on the capillary structure of aluminum alloy is constructed by acid-base environment. The problem of cross sensitivity of temperature and strain is solved by configuring an optical fiber grating which is not affected by strain and only sensitive to temperature inside the aluminum alloy tube. The results shows that he aluminum tube packaging design not only can sense the effects of corrosion on the mechanical properties, but also can interference shielding effect of corrosion on the tube optical fiber sensing device. With the deepening of the metal tube corrosion and aluminum alloy tube thickness gradually thinning, fiber grating reflective spectrum gradually shift to the short wavelength and the wall thickness and the grating center wavelength offset has a good monotonic relation. These characteristics can provide useful help to further research corrosion online monitoring based on optic fiber sensor.

Design and analysis of the radiator structure for space power systems

NASA Technical Reports Server (NTRS)

Dauterman, W. H.; Montgomery, L. D.

1973-01-01

The design, analysis, fabrication, and development of the 5-kWe radiator structure are shown. Thermal performance, meteoroid protection, structural capability during launch, development testing and space operation, material evaluation, and the configuration selection are described. The fin-tube development program depends on the relative values of the thermal coefficients of expansion. The initial selection of aluminum fins and Type 316 stainless-steel tubes was based on previous experience; however, the large differential in their expansion rates showed that an alternate, more compatible, combination was needed. Copper, stainless-steel-clad copper, boron-impregnated aluminum, and an independent radiator with a titanium structure were all considered as alternate materials. The final selection was Lockalloy fins with Type 304 stainless-steel D tubes.

Program to develop sprayed, plastically deformable compressor shroud seal materials

NASA Technical Reports Server (NTRS)

Schell, J. D.; Schell, J. D.

1980-01-01

A study of fundamental rub behavior for 10 dense, sprayed materials and eight current compressor clearance materials was conducted. A literature survey of a wide variety of metallurgical and thermophysical properties was conducted and correlated to rub behavior. Based on the results, the most promising dense rub material was Cu-9A1. Additional studies on the effects of porosity, incursion rate, blade solidity, and ambient temperature were carried out on aluminum bronze (Cu-9Al-1Fe) with and without a 515B Feltmetal underlayer. A further development effort was conducted to assess the property requirements of a porous, aluminum bronze, seal material. Strength, thermal cycle capabilities, erosion and oxidation resistance, machinability, and abradability at several porosity levels were examined.

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement II to Volume 5. Operational Support: Administrative Services Division.

ERIC Educational Resources Information Center

Anderson, Newell B.; And Others

One of two supplements which accompany chapter 5 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the following components of the administrative services division: purchasing, property control, and…

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement I to Volume 5. Operational Support: Administrative Services Division.

ERIC Educational Resources Information Center

Anderson, Newell B.; And Others

One of two supplements which accompany chapter 5 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the reprographic and personnel components of the administrative services division. Several job descriptions…

Performance Funding in Tennessee: Stimulus for Program Improvement.

ERIC Educational Resources Information Center

Banta, Trudy W.; Moffett, Marian S.

1987-01-01

All postsecondary institutions in Tennessee have the opportunity to earn an annual budget supplement for instruction from the state if certain criteria, based on educational outcomes, are obtained. A comprehensive assessment program at the University of Tennessee at Knoxville is described. (MLW)

40 CFR 60.190 - Applicability and designation of affected facility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction Plants § 60.190 Applicability and designation of affected facility. (a) The affected facilities in primary aluminum reduction plants to which this subpart applies are...

Investigation of Methods for Selectively Reinforcing Aluminum and Aluminum-Lithium Materials

NASA Technical Reports Server (NTRS)

Bird, R. Keith; Alexa, Joel A.; Messick, Peter L.; Domack, Marcia S.; Wagner, John A.

2013-01-01

Several studies have indicated that selective reinforcement offers the potential to significantly improve the performance of metallic structures for aerospace applications. Applying high-strength, high-stiffness fibers to the high-stress regions of aluminum-based structures can increase the structural load-carrying capability and inhibit fatigue crack initiation and growth. This paper discusses an investigation into potential methods for applying reinforcing fibers onto the surface of aluminum and aluminum-lithium plate. Commercially-available alumina-fiber reinforced aluminum alloy tapes were used as the reinforcing material. Vacuum hot pressing was used to bond the reinforcing tape to aluminum alloy 2219 and aluminum-lithium alloy 2195 base plates. Static and cyclic three-point bend testing and metallurgical analysis were used to evaluate the enhancement of mechanical performance and the integrity of the bond between the tape and the base plate. The tests demonstrated an increase in specific bending stiffness. In addition, no issues with debonding of the reinforcing tape from the base plate during bend testing were observed. The increase in specific stiffness indicates that selectively-reinforced structures could be designed with the same performance capabilities as a conventional unreinforced structure but with lower mass.

78 FR 52899 - Supplemental Nutrition Assistance Program (SNAP) Enhancing Retail Food Store Eligibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Supplemental Nutrition Assistance Program (SNAP) Enhancing Retail Food Store Eligibility--Listening Sessions AGENCY: Food and Nutrition Service... for Information (RFI) published by FNS regarding Supplemental Nutrition Assistance Program (SNAP...

Teachers' Perspectives of Ways to Improve an Elementary School's Supplemental Reading Program

ERIC Educational Resources Information Center

Clayton, JoAnn M.

2012-01-01

To improve students' reading abilities, an elementary school staff decided to supplement the regular curriculum with a free Internet reading program. To promote student participation in the supplemental program, the media specialist designed the Gumball Reading Program, which included student requirements and rewards. The requirements…

High reliability bond program using small diameter aluminum wire

NASA Technical Reports Server (NTRS)

Macha, M.; Thiel, R. A.

1975-01-01

The program was undertaken to characterize the performance of small diameter aluminum wire ultrasonically bonded to conductors commonly encountered in hybrid assemblies, and to recommend guidelines for improving this performance. Wire, 25.4, 38.1 and 50.8 um (1, 1.5 and 2 mil), was used with bonding metallization consisting of thick film gold, thin film gold and aluminum as well as conventional aluminum pads on semiconductor chips. The chief tool for evaluating the performance was the double bond pull test in conjunction with a 72 hour - 150 C heat soak and -65 C to +150 C thermal cycling. In practice the thermal cycling was found to have relatively little effect compared to the heat soak. Pull strength will decrease after heat soak as a result of annealing of the aluminum wire; when bonded to thick film gold, the pull strength decreased by about 50% (weakening of the bond interface was the major cause of the reduction). Bonds to thin film gold lost about 30 - 40% of their initial pull strenth; weakening of the wire itself at the bond heel was the predominant cause. Bonds to aluminum substrate metallization lost only about 22%. Bonds between thick and thin film gold substrate metallization and semiconductor chips substantiated the previous conclusions but also showed that in about 20 to 25% of the cases, bond interface failure occurred at the semiconductor chip.

Cathodic Protection Deployment on Space Shuttle Solid Rocket Boosters

NASA Technical Reports Server (NTRS)

Zook, Lee M.

1998-01-01

Corrosion protection of the space shuttle solid rocket boosters incorporates the use of cathodic protection(anodes) in concert with several coatings systems. The SRB design has large carbon/carbon composites(motor nozzle) electrically connected to an aluminum alloy structure. Early in the STS program, the aluminum structures incurred tremendous corrosive attack due primarily to the galvanic couple to the carbon/carbon nozzle at coating damage locations. Also contributing to the galvanic corrosion problem were stainless steel and titanium alloy components housed within the aluminum structures and electrically connected to the aluminum structures. This paper will highlight the evolution in the protection of the aluminum structures, providing historical information and summary data from the operation of the corrosion protection systems. Also, data and information will be included regarding the evaluation and deployment of inorganic zinc rich primers as anode area on the aluminum structures.

Passivated aluminum nanohole arrays for label-free biosensing applications.

PubMed

Canalejas-Tejero, Víctor; Herranz, Sonia; Bellingham, Alyssa; Moreno-Bondi, María Cruz; Barrios, Carlos Angulo

2014-01-22

We report the fabrication and performance of a surface plasmon resonance aluminum nanohole array refractometric biosensor. An aluminum surface passivation treatment based on oxygen plasma is developed in order to circumvent the undesired effects of oxidation and corrosion usually found in aluminum-based biosensors. Immersion tests in deionized water and device simulations are used to evaluate the effectiveness of the passivation process. A label-free bioassay based on biotin analysis through biotin-functionalized dextran-lipase conjugates immobilized on the biosensor-passivated surface in aqueous media is performed as a proof of concept to demonstrate the suitability of these nanostructured aluminum films for biosensing.

20 CFR 652.205 - May funds authorized under the Act be used to supplement funding for labor exchange programs...

Code of Federal Regulations, 2010 CFR

2010-04-01

... supplement funding for labor exchange programs authorized under separate legislation? 652.205 Section 652.205... § 652.205 May funds authorized under the Act be used to supplement funding for labor exchange programs... under sections 7(a) or 7(b) of the Act to supplement funding of any workforce activity carried out under...

Detection of lack of fusion using opaque additives

NASA Technical Reports Server (NTRS)

Cook, J. L.

1973-01-01

Reliable nondestructive inspection for incomplete weldment penetration and rapid oxidation of aluminum surfaces when exposed to the atmosphere are currently two major problems in welded aluminum spacecraft structure. Incomplete-penetration defects are extremely difficult to detect and can lead to catastrophic failure of the structure. The moisture absorbed by aluminum oxide on the surface can cause weldment porosity if the surface is not cleaned before welding. The approach employed in this program to solve both problems was to employ copper as a coating to prevent oxidation of the aluminum. Also, copper was used as an opaque additive in the weldment to enhance X-ray detection in the event of incomplete penetration.

42 CFR 422.102 - Supplemental benefits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 3 2012-10-01 2012-10-01 false Supplemental benefits. 422.102 Section 422.102... (CONTINUED) MEDICARE PROGRAM (CONTINUED) MEDICARE ADVANTAGE PROGRAM Benefits and Beneficiary Protections § 422.102 Supplemental benefits. (a) Mandatory supplemental benefits. (1) Subject to CMS approval, an MA...

42 CFR 422.102 - Supplemental benefits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 3 2013-10-01 2013-10-01 false Supplemental benefits. 422.102 Section 422.102... (CONTINUED) MEDICARE PROGRAM (CONTINUED) MEDICARE ADVANTAGE PROGRAM Benefits and Beneficiary Protections § 422.102 Supplemental benefits. (a) Mandatory supplemental benefits. (1) Subject to CMS approval, an MA...

42 CFR 422.102 - Supplemental benefits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 3 2014-10-01 2014-10-01 false Supplemental benefits. 422.102 Section 422.102... (CONTINUED) MEDICARE PROGRAM (CONTINUED) MEDICARE ADVANTAGE PROGRAM Benefits and Beneficiary Protections § 422.102 Supplemental benefits. (a) Mandatory supplemental benefits. (1) Subject to CMS approval, an MA...

Corrosion resistance of sodium sulfate coated cobalt-chromium-aluminum alloys at 900 C, 1000 C, and 1100 C

NASA Technical Reports Server (NTRS)

Santoro, G. J.

1979-01-01

The corrosion of sodium sulfate coated cobalt alloys was measured and the results compared to the cyclic oxidation of alloys with the same composition, and to the hot corrosion of compositionally equivalent nickel-base alloys. Cobalt alloys with sufficient aluminum content to form aluminum containing scales corrode less than their nickel-base counterparts. The cobalt alloys with lower aluminum levels form CoO scales and corrode more than their nickel-base counterparts which form NiO scales.

Satellite power system: Concept development and evaluation program, reference system report

NASA Technical Reports Server (NTRS)

1979-01-01

The Satellite Power System (SPS) Reference System is discussed and the technical and operational information required in support of environmental, socioeconomic, and comparative assessment studies are emphasized. The reference System concept features a gallium-aluminum-arsenide, and silicon solar cell options. Other aspects of an SPS are the construction of bases in space, launch and mission control bases on earth, and fleets of various transportation vehicles to support the construction and maintenance operations of the satellites.

Technology utilization and American competitiveness

NASA Astrophysics Data System (ADS)

Penaranda, Frank; Arnold, Ray; Fetterolf, Fred

This session of discussions reports on two sides of the technology transfer issue. The speakers are representatives of the aluminum industry (Alcoa Aluminum) and the National Aeronautics and Space Administration, Office of Commercial Programs. They discuss what technology transfer means, what NASA does for industry, and how information is disseminated.

Technology utilization and American competitiveness

NASA Technical Reports Server (NTRS)

Penaranda, Frank; Arnold, Ray; Fetterolf, Fred

1992-01-01

This session of discussions reports on two sides of the technology transfer issue. The speakers are representatives of the aluminum industry (Alcoa Aluminum) and the National Aeronautics and Space Administration, Office of Commercial Programs. They discuss what technology transfer means, what NASA does for industry, and how information is disseminated.

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

25 CFR 39.102 - What is academic base funding?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What is academic base funding? 39.102 Section 39.102... PROGRAM Indian School Equalization Formula Base and Supplemental Funding § 39.102 What is academic base funding? Academic base funding is the ADM times the weighted student unit. ...

TMA Chemical Release Payloads for Stratospheric Wind Measurements Auroral E Program and Related Programs

DTIC Science & Technology

1982-03-15

this work was to provide a piston tank filled with trimethyl aluminum for release as a trail in the upper atmosphere. This payload was launched from the...trail payloads. II. PAYLOAD DESCRIPTION The payload consists of a programmer section with plumbing and a piston tank section. The outer shell of the...payload is the wall of the piston tank . The liquid side of the piston tank is filled with 20 pounds of tri- methyl- aluminum (TMA). After filling the

Speciation and equilibrium relations of soluble aluminum in a headwater stream at base flow and during rain events

USGS Publications Warehouse

Burns, Douglas A.

1989-01-01

In a small watershed in the Shenandoah National Park, Virginia, the short-term dynamics of soluble aluminum in stream water sampled during rain events differed significantly from stream water sampled during base flow conditions. Three fractions of dissolved aluminum were measured. The inorganic monomeric fraction made up approximately two thirds of the total reactive aluminum at base flow, followed by the acid-soluble and organic monomeric fractions, respectively. Equilibrium modeling showed that hydroxide complexes were the most abundant form of inorganic monomeric aluminum followed by fluoride, free aluminum ion, and sulfate. The activity of inorganic monomeric aluminum at base flow appears to be in equilibrium with an Al(OH)3 phase with solubility intermediate between microcrystalline gibbsite and natural gibbsite. During two rain events, the concentration of all three aluminum fractions increased significantly. Available chemical evidence indicates that acidic soil water was the primary source of dissolved aluminum. As flow increased, the Al(OH)3 saturation index in the stream water increased significantly. The primary cause of the transient increase in the Al(OH)3 saturation index appears to have been the neutralization of excess H+ added by soil water through reaction with stream water HCO3− at a more rapid rate than excess inorganic monomeric aluminum could be removed from solution by hydroxide mineral precipitation. A soil water/stream water mixing model was developed based on measured changes of stream water alkalinity, silica concentration, and charge imbalance during the rain events. Model results indicate that a small amount of soil water (3–11%) was present in the stream at peak stage.

Examining the Effectiveness of a Multi-Sensory Instructional Reading Program in One Rural Midwestern School District

ERIC Educational Resources Information Center

Waldvogel, Steven John

2010-01-01

Scope and method of study: The purpose of this research study was to examine the effectiveness of an (IMSE) Orton-Gillingham based multi-sensory instructional reading program when incorporated with kindergarten through first grade classroom reading instruction in one rural Midwestern school district. The IMSE supplemental reading program is…

Fidelity of After-School Program Implementation Targeting Adolescent Youth: Identifying Successful Curricular and Programmatic Characteristics

ERIC Educational Resources Information Center

Rajan, Sonali; Basch, Charles E.

2012-01-01

Background: This study consisted of a formative evaluation of an after-school health education program designed for adolescent females, entitled Girls on Track. Evidence-based after-school programs have potential to supplement the traditional school day, encourage social and emotional skill development, improve the quality of student health, and…

Swim Free. A 10 Day Program of Aquatic Exercises Adapted from Life in the Waterworld.

ERIC Educational Resources Information Center

Eberhardt, Lorraine; Sanborn, Laura

The completely waterproof book contains instructions for an alternative form of swimming exercises based on the movements of 19 water creatures. The exercises can be used by groups or individuals to enhance training programs, to serve as part of a structured synchronized swimming program, or to supplement recreational activities. The book provides…

Quick Reaction Evaluation of Materials for Systems Applications.

DTIC Science & Technology

1980-04-01

The six slack-quenched aluminum alloy plates used in this program were: (1) 2024 -T851; 2.75 inches (60 mm) thick, (2) 2024 - T351 ; 2.00 inches (51 mm...compact (CT) specimen machined from aluminum alloys 7075-T6 and 2024 - T351 , titanium 6A1-4V, and 4340 steel. Deviation between the two curves is small...1.6 Complete Fatigue Crack Growth Rate Curves for Aluminum Alloy 2124-T851 Including Crack Growth Modeling 44 1.7 Crack Length Determination for the

Seventh Topical Report on The Reactions of Borohydrides and Aluminohydrides with Wolfram (VI) Halides and Eighth Topical Report on Preparation and Properties of Thorium Borohydride

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bragdon, Robert W.

1950-11-08

(1) A comprehensive investigation of methods for the preparation of hydrides of wolfram has been made. A wolfram (IV) hydride-aluminum hydride mixture has been prepared and its N{sub H} and thermal stability determined for its evaluation as a nuclear radiation shield material. Aluminum borohydride has been shown to reduce wolfram (VI) chloride to a subchloride. The alkali borohydrides also reduce hexavalent wolfram, but in no case has a wolfram borohydride been isolated. (2) An investigation of the chemical and physical properties of thorium borohydride, which pertain to its use as alow-temperature nuclear radiatin shield, is presented. Values are taken frommore » the literature when available and are supplemented where necessary by our experimental investigation.« less

78 FR 17631 - Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Income Eligibility Guidelines AGENCY: Food and Nutrition Service... persons applying to participate in the Special Supplemental Nutrition Program for Women, Infants and...

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement III to Volume 7. Preparing the Student: The Education Services Division.

ERIC Educational Resources Information Center

Mutterer, Richard H.

One of three supplements which accompany chapter 7 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the mobility and transportation component and marketing and tourism component of the educational services…

75 FR 54302 - Aluminum Extrusions From the People's Republic of China: Preliminary Affirmative Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-07

...- specific rates calculated for participating respondents, because to do so would require the use of program... People's Republic of China: Preliminary Affirmative Countervailing Duty Determination AGENCY: Import... producers and exporters of aluminum extrusions from the People's Republic of China (the PRC). For...

Assessment of Accelerated Tests Compared to Beachfront Test and Proposed Evaluation Method

DTIC Science & Technology

2009-09-03

Certification Program (ESTCP) funded project entitled “Non-Chromate Aluminum Pretreatments” ( NCAP ) – Funding began in 2000, ended 2004 for Phase I...corrosion tests to beachfront test NCAP Data Assessment Data set includes: – 4 aluminum alloys: 2024, 7075, 2219, 5083 – 9 conversion coatings

Effects of aluminum and iron nanoparticle additives on composite AP/HTPB solid propellant regression rate

NASA Astrophysics Data System (ADS)

Styborski, Jeremy A.

This project was started in the interest of supplementing existing data on additives to composite solid propellants. The study on the addition of iron and aluminum nanoparticles to composite AP/HTPB propellants was conducted at the Combustion and Energy Systems Laboratory at RPI in the new strand-burner experiment setup. For this study, a large literature review was conducted on history of solid propellant combustion modeling and the empirical results of tests on binders, plasticizers, AP particle size, and additives. The study focused on the addition of nano-scale aluminum and iron in small concentrations to AP/HTPB solid propellants with an average AP particle size of 200 microns. Replacing 1% of the propellant's AP with 40-60 nm aluminum particles produced no change in combustive behavior. The addition of 1% 60-80 nm iron particles produced a significant increase in burn rate, although the increase was lesser at higher pressures. These results are summarized in Table 2. The increase in the burn rate at all pressures due to the addition of iron nanoparticles warranted further study on the effect of concentration of iron. Tests conducted at 10 atm showed that the mean regression rate varied with iron concentration, peaking at 1% and 3%. Regardless of the iron concentration, the regression rate was higher than the baseline AP/HTPB propellants. These results are summarized in Table 3.

Efficacy of an Exercise and Nutritional Supplement Program on Physical Performance and Nutritional Status in Older Adults With Mobility Limitations Residing at Senior Living Facilities.

PubMed

Corcoran, Michael P; Nelson, Miriam E; Sacheck, Jennifer M; Reid, Kieran F; Kirn, Dylan; Fielding, Roger A; Chui, Kenneth K H; Folta, Sara C

2017-07-01

This cluster-randomized trial was designed to determine the efficacy of a 6-month exercise-nutritional supplement program (ENP) on physical function and nutritional status for older adults and the feasibility of implementing this program in a senior living setting. Twenty senior-living facilities were randomized to either a 3 day per week group-based ENP led by a trained facility staff member or a health education program (SAP). Participants (N = 121) completed a short physical performance battery, 400-m walk, handgrip strength test, and mini-nutrition assessment. 25-hydroxyvitamin D [25(OH)D], insulin-like growth-factor 1 (IGF-1), and activity level were also measured. The ENP did not significantly improve physical function or nutritional status compared with the SAP. Compared with baseline, participants in the ENP engaged in 39 min less physical activity per week at 6 months. Several facility characteristics hindered implementation of the ENP. This study highlights the complexity of implementing an evidence-based program in a field setting.

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development and Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan; Kirchner, Robert; Engel, Carl D.

2014-01-01

The Space Launch System (SLS) base heating test is broken down into two test programs: (1) Pathfinder and (2) Main Test. The Pathfinder Test Program focuses on the design, development, hot-fire test and performance analyses of the 2% sub-scale SLS core-stage and booster element propulsion systems. The core-stage propulsion system is composed of four gaseous oxygen/hydrogen RS-25D model engines and the booster element is composed of two aluminum-based model solid rocket motors (SRMs). The first section of the paper discusses the motivation and test facility specifications for the test program. The second section briefly investigates the internal flow path of the design. The third section briefly shows the performance of the model RS-25D engines and SRMs for the conducted short duration hot-fire tests. Good agreement is observed based on design prediction analysis and test data. This program is a challenging research and development effort that has not been attempted in 40+ years for a NASA vehicle.

Creating and Implementing Diverse Development Strategies to Support Extension Centers and Programs

ERIC Educational Resources Information Center

Page, Christopher S.; Kern, Michael A.

2018-01-01

Declining government funding for higher education requires colleges and universities to seek alternative revenue streams, including through philanthropic fund-raising. Extension-based subject matter centers and other programs can benefit from the thoughtful supplementation of traditional revenue sources with individual, corporate, and private…

Research, Policy, and the Federal Role in Prevention Initiatives for Children.

ERIC Educational Resources Information Center

Ripple, Carol H.; Zigler, Edward

2003-01-01

Reviews five federal policy-based initiatives for children and families (Project Head Start; lead poisoning prevention; Medicaid; Special Supplemental Program for Women, Infants, and Children; and Earned Income Tax Credit), discussing aspects of federal prevention program design, implementation, policy, and research. (Contains references.) (SM)

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... standards; (C) Are of high quality, research-based, and specifically designed to increase the academic... surveys, if any, regarding the success of the provider's instructional program in increasing student... recommendations or results from parent surveys regarding the success of the provider's instructional program in...

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... standards; (C) Are of high quality, research-based, and specifically designed to increase the academic... surveys, if any, regarding the success of the provider's instructional program in increasing student... recommendations or results from parent surveys regarding the success of the provider's instructional program in...

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... standards; (C) Are of high quality, research-based, and specifically designed to increase the academic... surveys, if any, regarding the success of the provider's instructional program in increasing student... recommendations or results from parent surveys regarding the success of the provider's instructional program in...

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... standards; (C) Are of high quality, research-based, and specifically designed to increase the academic... surveys, if any, regarding the success of the provider's instructional program in increasing student... recommendations or results from parent surveys regarding the success of the provider's instructional program in...

PROMOTING SUPPORTIVE PARENTING IN NEW MOTHERS WITH SUBSTANCE-USE PROBLEMS: A PILOT RANDOMIZED TRIAL OF RESIDENTIAL TREATMENT PLUS AN ATTACHMENT-BASED PARENTING PROGRAM

PubMed Central

BERLIN, LISA J.; SHANAHAN, MEGHAN; CARMODY, KAREN APPLEYARD

2015-01-01

This pilot randomized trial tested the feasibility and efficacy of supplementing residential substance-abuse treatment for new mothers with a brief, yet rigorous, attachment-based parenting program. Twenty-one predominantly (86%) White mothers and their infants living together in residential substance-abuse treatment were randomly assigned to the program (n = 11) or control (n = 10) group. Program mothers received 10 home-based sessions of Dozier’s Attachment and Biobehavioral Catch-up (ABC) intervention. Postintervention observations revealed more supportive parenting behaviors among the randomly assigned ABC mothers. PMID:25424409

77 FR 58404 - Announcing the Award of Three Single-Source Program Expansion Supplement Grants to Unaccompanied...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

...] Announcing the Award of Three Single-Source Program Expansion Supplement Grants to Unaccompanied Alien... its Unaccompanied Alien Children's Program to two organizations, Florence Crittenton Services of... unaccompanied alien children through September 30, 2012. The supplement grant will support the expansion of bed...

Metal-matrix radiation-protective composite materials based on aluminum

NASA Astrophysics Data System (ADS)

Cherdyntsev, V. V.; Gorshenkov, M. V.; Danilov, V. D.; Kaloshkin, S. D.; Gul'bin, V. N.

2013-05-01

A method of mechanical activation providing a homogeneous distribution of reinforcing boron-bearing components and tungsten nanopowder in the matrix is recommended for making an aluminum-based radiation- protective material. Joint mechanical activation and subsequent extrusion are used to produce aluminum- based composites. The structure and the physical, mechanical and tribological characteristics of the composite materials are studied.

24 CFR 5.520 - Proration of assistance.

Code of Federal Regulations, 2012 CFR

2012-04-01

...—(1) Proration under Rent Supplement Program. If the household participates in the Rent Supplement Program, the rent supplement paid on the household's behalf shall be the rent supplement the household... people in the household and the numerator of which is the number of eligible persons in the household; (2...

24 CFR 5.520 - Proration of assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

...—(1) Proration under Rent Supplement Program. If the household participates in the Rent Supplement Program, the rent supplement paid on the household's behalf shall be the rent supplement the household... people in the household and the numerator of which is the number of eligible persons in the household; (2...

24 CFR 5.520 - Proration of assistance.

Code of Federal Regulations, 2011 CFR

2011-04-01

...—(1) Proration under Rent Supplement Program. If the household participates in the Rent Supplement Program, the rent supplement paid on the household's behalf shall be the rent supplement the household... people in the household and the numerator of which is the number of eligible persons in the household; (2...

24 CFR 5.520 - Proration of assistance.

Code of Federal Regulations, 2014 CFR

2014-04-01

...—(1) Proration under Rent Supplement Program. If the household participates in the Rent Supplement Program, the rent supplement paid on the household's behalf shall be the rent supplement the household... people in the household and the numerator of which is the number of eligible persons in the household; (2...

24 CFR 5.520 - Proration of assistance.

Code of Federal Regulations, 2013 CFR

2013-04-01

...—(1) Proration under Rent Supplement Program. If the household participates in the Rent Supplement Program, the rent supplement paid on the household's behalf shall be the rent supplement the household... people in the household and the numerator of which is the number of eligible persons in the household; (2...

Selenium Adsorption To Aluminum-Based Water Treatment Residuals

EPA Science Inventory

Aluminum-based water treatment residuals (WTR) can adsorb water-and soil-borne P, As(V), As(III), and perchlorate, and may be able to adsorb excess environmental selenium. WTR, clay minerals, and amorphous aluminum hydroxide were shaken for 24 hours in selenate or selenite solut...

Cathode for aluminum producing electrolytic cell

DOEpatents

Brown, Craig W.

2004-04-13

A method of producing aluminum in an electrolytic cell comprising the steps of providing an anode in a cell, preferably a non-reactive anode, and also providing a cathode in the cell, the cathode comprised of a base material having low electrical conductivity reactive with molten aluminum to provide a highly electrically conductive layer on the base material. Electric current is passed from the anode to the cathode and alumina is reduced and aluminum is deposited at the cathode. The cathode base material is selected from boron carbide, and zirconium oxide.

Costs of the multimicronutrient supplementation program in Chiclayo, Peru.

PubMed

Lechtig, Aarón; Gross, Rainer; Paulini, Javier; de Romaã, Daniel López

2006-01-01

There is little information on the cost parameters of weekly multimicronutrient supplementation programs. To assess the cost parameters and cost-effectiveness of a weekly multimicronutrient supplementation program in an urban population of Peru. Data from the Integrated Food Security Program (Programa Integrado de Seguridad Alimentaria [PISA]), which distributed capsules and foodlets to women and adolescent girls and to children under five, were extrapolated to a population of 100,000 inhabitants. The annual cost per community member was US$1.51. The cost-effectiveness ratio was US$0.12 per 1% of prevented anemia per community member. These costs are in the upper margin of iron supplementation alone. They will decrease notably when weekly multimicronutrient supplementation programs are integrated into health packages and participation by women increases. Focusing on micronutrient deficiencies would prevent these problems, and food-distribution programs would be effectively targeted to food-deficient populations.

Metallic alternative to glass mirrors (active mirrors in aluminium) - A review

NASA Astrophysics Data System (ADS)

Rozelot, Jean P.; Leblanc, Jean-M.

1991-09-01

Present-day glass mirrors for telescopes, including the most recent results obtained with aluminum mirrors developed within the European EUREKA procedure (LAMA program) are reviewed. The major advantages of the aluminum-alloy solution, which can be extrapolated today for large size, are discussed. It is shown that aluminum-alloy meniscus blanks, polished on a thin nickel coating, are appropriate to manufacture mirrors of astronomical quality. With the technique of electron-beam welding, large sizes can be envisaged. The development of active optics makes it possible to easily compensate for real-time deformations. The good thermal diffusivity of aluminum alloys leads to a better and faster thermal equilibrium than all other glass structures.

Applications of high-temperature powder metal aluminum alloys to small gas turbines

NASA Technical Reports Server (NTRS)

Millan, P. P., Jr.

1982-01-01

A program aimed at the development of advanced powder-metallurgy (PM) aluminum alloys for high-temperature applications up to 650 F using the concepts of rapid solidification and mechanical alloying is discussed. In particular, application of rapidly solidified PM aluminum alloys to centrifugal compressor impellers, currently used in auxiliary power units for both military and commercial aircraft and potentially for advanced automotive gas turbine engines, is examined. It is shown that substitution of high-temperature aluminum for titanium alloy impellers operating in the 360-650 F range provides significant savings in material and machining costs and results in reduced component weight, and consequently, reduced rotating group inertia requirements.

Effects of a Computer-Based Early Reading Program on the Early Reading and Oral Language Skills of At-Risk Preschool Children

ERIC Educational Resources Information Center

Huffstetter, Mary; King, James R.; Onwuegbuzie, Anthony J.; Schneider, Jenifer J.; Powell-Smith, Kelly A.

2010-01-01

This study examined the effects of a computer-based early reading program (Headsprout Early Reading) on the oral language and early reading skills of at-risk preschool children. In a pretest-posttest control group design, 62 children were randomly assigned to receive supplemental instruction with Headsprout Early Reading (experimental group) or…

A Self-Instructional Course in Student Financial Aid Administration. Module 12: The Campus-Based Programs: SEOG, CWS, and Perkins Loan. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The twelfth module in a 17-module self-instructional course on student financial aid administration discusses campus-based financial programs. They are SEOG (Supplemental Educational Opportunity Grant), CWS (College Work-Study), and Perkins Loans. It is part of a full course designed for novice financial aid administrators and other institutional…

How to supplement Social Security fairly and effectively.

PubMed

Ghilarducci, Teresa

2010-04-01

Over the past 3 decades, the base upon which Americans obtain income for retirement has become increasingly tied to fluctuations in the financial markets. Because Social Security provides a small percentage of pre-retirement income in retirement, most of the nation's workers need a supplement to Social Security. This study demonstrates the failure of the 401(k) system and advances a bold, but realistic, solution to America's crumbling retirement system: guaranteed retirement accounts (GRAs), a universal government program that supplements Social Security by providing guaranteed rates of return, by locking up balances until retirement, and by mandating annuities at retirement-with survivor's benefits. The GRA plan is compared to other proposals, including President Obama's, which aims to expand the voluntary, commercial, individually directed account-based system.

A computational NMR study on zigzag aluminum nitride nanotubes

NASA Astrophysics Data System (ADS)

Bodaghi, Ali; Mirzaei, Mahmoud; Seif, Ahmad; Giahi, Masoud

2008-12-01

A computational nuclear magnetic resonance (NMR) study is performed to investigate the electronic structure properties of the single-walled zigzag aluminum nitride nanotubes (AlNNTs). The chemical-shielding (CS) tensors are calculated at the sites of Al-27 and N-15 nuclei in three structural forms of AlNNT including H-saturated, Al-terminated, and N-terminated ones. The structural forms are firstly optimized and then the calculated CS tensors in the optimized structures are converted to chemical-shielding isotropic (CSI) and chemical-shielding anisotropic (CSA) parameters. The calculated parameters reveal that various Al-27 and N-15 nuclei are divided into some layers with equivalent electrostatic properties; furthermore, Al and N can act as Lewis base and acid, respectively. In the Al-terminated and N-terminated forms of AlNNT, in which one mouth of the nanotube is terminated by aluminum and nitrogen nuclei, respectively, just the CS tensors of the nearest nuclei to the mouth of the nanotube are significantly changed due to removal of saturating hydrogen atoms. Density functional theory (DFT) calculations are performed using GAUSSIAN 98 package of program.

Experimental Evaluation of Fatigue Crack Initiation from Corroded Hemispherical Notches in Aerospace Structural Materials

NASA Technical Reports Server (NTRS)

Garcia, Daniel B.; Forman, Royce; Shindo, David

2010-01-01

A test program was developed and executed to evaluate the influence of corroded hemispherical notches on the fatigue crack initiation and propagation in aluminum 7075-T7351, 4340 steel, and D6AC steel. Surface enhancements such as shot peening and laser shock peening were also incorporated as part of the test effort with the intent of improving fatigue performance. In addition to the testing, fracture mechanics and endurance limit based analysis methods were evaluated to characterize the results with the objective of challenging typical assumptions used in modeling fatigue cracks from corrosion pits. The results specifically demonstrate that the aluminum and steel alloys behave differently with respect to fatigue crack initiation from hemispherical corrosion pits. The aluminum test results were bounded by the fracture mechanics and endurance limit models while exhibiting a general insensitivity to the residual stress field generated by shot peening. The steel specimens were better characterized by the endurance limit fatigue properties and did exhibit sensitivities to residual stresses from the shot peening and laser shock peening

Dietary Lactobacillus plantarum supplementation enhances growth performance and alleviates aluminum toxicity in tilapia.

PubMed

Yu, Leilei; Zhai, Qixiao; Zhu, Jiamin; Zhang, Chengcheng; Li, Tianqi; Liu, Xiaoming; Zhao, Jianxin; Zhang, Hao; Tian, Fengwei; Chen, Wei

2017-09-01

We investigated the protection offered by the probiotic Lactobacillus plantarum CCFM639 against waterborne Al exposure in tilapia. Fish were allocated to control, CCFM639-only, Al-only or Al plus CCFM639 groups. The fish were exposed to 2.73mg/L Al ions for 4 weeks. The probiotic was incorporated into the fish diet at 10 8 CFU/g and provided twice daily. Our results showed that L. plantarum CCFM639 significantly enhanced feed utilization, growth performance and antioxidant ability in the absence of waterborne Al exposure. When fish were exposed to Al, dietary supplementation with the strain effectively decreased the death rate and accumulation of Al in tissues, and enhanced growth performance. Moreover, Al-induced changes in hematobiochemical parameters and hepatic oxidative stress and histopathology were also alleviated. Therefore, L. plantarum CCFM639 may be a novel dietary supplement for fish to enhance growth performance and prevent aquaculture and food safety problems induced by Al pollution. Copyright © 2017. Published by Elsevier Inc.

48 CFR 1815.407-2 - Make-or-buy programs. (NASA supplements paragraph (e))

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Make-or-buy programs. (NASA supplements paragraph (e)) 1815.407-2 Section 1815.407-2 Federal Acquisition Regulations System... NEGOTIATION Contract Pricing 1815.407-2 Make-or-buy programs. (NASA supplements paragraph (e)) (e)(1) Make-or...

48 CFR 1815.407-2 - Make-or-buy programs. (NASA supplements paragraph (e))

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Make-or-buy programs. (NASA supplements paragraph (e)) 1815.407-2 Section 1815.407-2 Federal Acquisition Regulations System... NEGOTIATION Contract Pricing 1815.407-2 Make-or-buy programs. (NASA supplements paragraph (e)) (e)(1) Make-or...

77 FR 60128 - Noncompetitive Supplements to Nursing Assistant and Home Health Aide Program Grantees

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... Noncompetitive Supplements to Nursing Assistant and Home Health Aide Program Grantees AGENCY: Health Resources... expansion supplements of $100,000 to 10 Nursing Assistant and Home Health Aide (NAHHA) Program grantees to... University Health Sciences Center (TTUHSC) School of Nursing, 302 Pine Street, Abilene, TX 79601, T51HP20702...

Physical and Electrical Characterization of Aluminum Polymer Capacitors

NASA Technical Reports Server (NTRS)

Liu, David (Donghang)

2010-01-01

Conductive polymer aluminum capacitor (PA capacitor) is an evolution of traditional wet electrolyte aluminum capacitors by replacing liquid electrolyte with a solid, highly conductive polymer. On the other hand, the cathode construction in polymer aluminum capacitors with coating of carbon and silver epoxy for terminal connection is more like a combination of the technique that solid tantalum capacitor utilizes. This evolution and combination result in the development of several competing capacitor construction technologies in manufacturing polymer aluminum capacitors. The driving force of this research on characterization of polymer aluminum capacitors is the rapid progress in IC technology. With the microprocessor speeds exceeding a gigahertz and CPU current demands of 80 amps and more, the demand for capacitors with higher peak current and faster repetition rates bring conducting polymer capacitors to the center o( focus. This is because this type of capacitors has been known for its ultra-low ESR and high capacitance. Polymer aluminum capacitors from several manufacturers with various combinations of capacitance, rated voltage, and ESR values were obtained and tested. The construction analysis of the capacitors revealed three different constructions: conventional rolled foil, the multilayer stacking V-shape, and a dual-layer sandwich structure. The capacitor structure and its impact on the electrical characteristics has been revealed and evaluated. A destructive test with massive current over stress to fail the polymer aluminum capacitors reveals that all polymer aluminum capacitors failed in a benign mode without ignition, combustion, or any other catastrophic failures. The extraordinary low ESR (as low as 3 mOMEGA), superior frequency independence reported for polymer aluminum capacitors have been confirmed. For the applications of polymer aluminum capacitors in space programs, a thermal vacuum cycle test was performed. The results, as expected, show no impact on the electrical characteristics of the capacitors. The breakdown voltage of polymer capacitors has been evaluated using a steady step surge test. Initial results show the uniform distribution in the breakdown voltage for polymer aluminum capacitors. Polymer aluminum capacitors with a combination of very high capacitance, extraordinary low ESR, excellent frequency stability, and non-ignite benign failure mode make it a niche fit in space applications for both today and future. Polymer capacitors are apparently also the best substitutes of the currently used MnO2-based tantalum capacitors in the low voltage range. However, some critical aspects are still to be addressed in the next phase of the investigation for PA capacitors. These include the long term reliability test of 125 C dry life and 85 C/85%RH humidity, the failure mechanism and de-rating, the radiation tolerance, and the high temperature performance. All of the above requires the continuous NEPP funding and support.

Noni-based nutritional supplementation and exercise interventions influence body composition

PubMed Central

Palu, Afa K.; West, Brett J.; Jensen, Jarakae

2011-01-01

Background: The prevalence of obesity and overweight in the Unites States has reached unprecedented levels, and so has the need for effective exercise and nutritional programs for prevention of unhealthy weight gain or safe weight loss. Aims: The present study was conducted in overweight men and women to assess the impact of noni-based nutritional supplementation and exercise interventions on body composition. Materials and Methods: Twenty two participants (16 women and 6 men), ages 18-65, were enrolled in a 12-week, open-label trial of a weight-loss program involving noni-based dietary supplements, gender-specific daily calorie restriction, and exercise interventions. Weight, percent body fat, and body mass index were measured before and after the trial. Results: All participants experienced weight loss. The average decrease in fat mass was highly significant (P < 0.0001), as were decreases in percent body fat and body mass index. Individual weight and fat mass losses were 17.55 ± 9.73 and 21.78 ± 8.34 lbs., respectively, and individual percent body fat and body mass index decreases were 8.91 ± 3.58 % and 2.6 ± 1.32, respectively. Conclusion: The nutritional and exercise interventions significantly influenced body composition among participants. PMID:22363077

Noni-based nutritional supplementation and exercise interventions influence body composition.

PubMed

Palu, Afa K; West, Brett J; Jensen, Jarakae

2011-12-01

The prevalence of obesity and overweight in the Unites States has reached unprecedented levels, and so has the need for effective exercise and nutritional programs for prevention of unhealthy weight gain or safe weight loss. The present study was conducted in overweight men and women to assess the impact of noni-based nutritional supplementation and exercise interventions on body composition. Twenty two participants (16 women and 6 men), ages 18-65, were enrolled in a 12-week, open-label trial of a weight-loss program involving noni-based dietary supplements, gender-specific daily calorie restriction, and exercise interventions. Weight, percent body fat, and body mass index were measured before and after the trial. All participants experienced weight loss. The average decrease in fat mass was highly significant (P < 0.0001), as were decreases in percent body fat and body mass index. Individual weight and fat mass losses were 17.55 ± 9.73 and 21.78 ± 8.34 lbs., respectively, and individual percent body fat and body mass index decreases were 8.91 ± 3.58 % and 2.6 ± 1.32, respectively. The nutritional and exercise interventions significantly influenced body composition among participants.

Anodic Behavior of the Aluminum Current Collector in Imide-Based Electrolytes: Influence of Solvent, Operating Temperature, and Native Oxide-Layer Thickness.

PubMed

Meister, Paul; Qi, Xin; Kloepsch, Richard; Krämer, Elisabeth; Streipert, Benjamin; Winter, Martin; Placke, Tobias

2017-02-22

The inability of imide salts to form a sufficiently effective passivation layer on aluminum current collectors is one of the main obstacles that limit their broad application in electrochemical energy-storage systems. However, under certain circumstances, the use of electrolytes with imide electrolyte salts in combination with the aluminum current collector is possible. In this contribution, the stability of the aluminum current collector in electrolytes containing either lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) or lithium fluorosulfonyl-(trifluoromethanesulfonyl) imide (LiFTFSI) as conductive salt was investigated by electrochemical techniques, that is, cyclic voltammetry (CV) and chronocoulometry (CC) in either room-temperature ionic liquids or in ethyl methyl sulfone. In particular, the influence of the solvent, operating temperature, and thickness of the native oxide layer of aluminum on the pit formation at the aluminum current collector surface was studied by means of scanning electron microscopy. In general, a more pronounced aluminum dissolution and pit formation was found at elevated temperatures as well as in solvents with a high dielectric constant. An enhanced thickness of the native aluminum oxide layer increases the oxidative stability versus dissolution. Furthermore, we found a different reaction rate depending on dwell time at the upper cut-off potential for aluminum dissolution in TFSI- and FTFSI-based electrolytes during the CC measurements; the use of LiFTFSI facilitated the dissolution of aluminum compared to LiTFSI. Overall, the mechanism of anodic aluminum dissolution is based on: i) the attack of the Al 2 O 3 surface by acidic species and ii) the dissolution of bare aluminum into the electrolyte, which, in turn, is influenced by the electrolyte's dielectric constant. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Treatment of wastewater from the dairy industry using electroflocculation and solid whey recovery.

PubMed

Melchiors, Marina S; Piovesan, Mauricio; Becegato, Vitor R; Becegato, Valter A; Tambourgi, Elias B; Paulino, Alexandre T

2016-11-01

The aim of this study was to investigate the efficiency of electroflocculation for the treatment of wastewater from the dairy industry and the recovery of solid whey. An electrochemical apparatus containing two aluminum or iron electrodes, a power source, an electroflocculation cell and magnetic stirring was employed. The following experimental conditions were monitored: electroflocculation time, initial pH of wastewater and applied potential intensity. Chemical oxygen demand, turbidity and final pH were the response variables. The chemical oxygen demand and turbidity decreased by employing aluminum or iron electrodes, applied potential intensity of 5 V, distance between two electrodes of 2 cm, 60 min electroflocculation time and initial wastewater pH of 5.0. The removal rates of organic matter based on the measure of chemical oxygen demand and turbidity when employing aluminum electrodes were 97.0 ± 0.02% and 99.6 ± 3.00 × 10(-4)%, respectively, with a final pH of 6.72. The removal rates of organic matter when employing iron electrodes were 97.4 ± 0.01% and 99.1 ± 1.00 × 10(-4)%, respectively, with a final pH of 7.38. In conclusion, electroflocculation is an excellent alternative for the dairy wastewater treatment in comparison to conventional treatment methods. The water used in food production and equipment washing is recovered with this method, resulting in a liquid that can be properly disposed. It is also possible to recover solid whey after electroflotation, which can then be used in the production of food supplements for humans and animals. Therefore, the dairy wastewater treatment process employing electroflocculation leads to sustainable food production. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Stafford Student Loan Program. Testimony before the Subcommittee on Permanent Investigations, Committee on Governmental Affairs, United States Senate.

ERIC Educational Resources Information Center

Frazier, Franklin

The Stafford Loan Program (formerly called the Guaranteed Student Loan Program) makes three kinds of student loans for postsecondary education: Stafford Loans, Supplemental Loans for Students (SLS), and Parents Loans for Undergraduate Students (PLUS). Stafford loans are low-interest loans based on financial need, while SLS and PLUS loans are not…

Development Report for the 10 KW Sound Attenuation Program (Preproduction ’F’ Kit).

DTIC Science & Technology

1981-12-02

3.2 Panel Design The panels were to be constructed from solid aluminum sheet metal on all ex- ; terior surfaces and acoustic fiberglass or mineral ... wool bill overlayed with a synthetic film and encapsulated with perforated aluminum on the interior sur- faces. Per design, the acoustic panels on the

The Comparative Performance of Batteries: The Lead-Acid and the Aluminum-Air Cells.

ERIC Educational Resources Information Center

LeRoux, Xavier; And Others

1996-01-01

Describes a teaching program that shows how electrochemical principles can be conveyed by means of hands-on experiences of student-centered teaching experiments. Employs the readily available lead-acid cell and the simple aluminum-air cell. Discusses the batteries, equilibrium cell potential, performance comparison, current, electrode separation,…

Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications

NASA Astrophysics Data System (ADS)

Doherty, Kevin; Squillacioti, Richard; Cheeseman, Bryan; Placzankis, Brian; Gallardy, Denver

For many years, the range of aluminum alloys for armor plate applications obtainable in accordance with detailed military specifications was very limited. However, the development of improved aluminum alloys for aerospace and other applications has provided an opportunity to modernize the Army portfolio for ground vehicle armor applications. While the benefits of offering additional alloy choices to vehicle designers is obvious, the process of creating detailed military specifications for armor plate applications is not trivial. A significant amount of material and testing is required to develop the details required by an armor plate specification. Due to the vast number of material programs that require standardization and with a limited amount of manpower and funds as a result of Standardization Reform in 1995, one typically requires a need statement from a vehicle program office to justify and sponsor the work. This presentation will focus on recent aluminum alloy armor plate specifications that have added capability to vehicle designers' selection of armor materials that offer possible benefits such as lower cost, higher strength, better ballistic and corrosion resistance, improved weldability, etc.

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement Four to Volume Three. Measurement and Evaluation: The Research Services Division.

ERIC Educational Resources Information Center

Coyle, David A.; And Others

One of five supplements which accompany chapter 3 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains a master listing of all Mountain-Plains curriculum, compiled by job title, course, unit, and Learning activity package (LAPS) and arranged…

Identifying Head Start and Public Pre-K Participation in NSECE Data on Center-Based ECE Programs. NSECE Technical Report Supplement. OPRE Report 2015-92b

ERIC Educational Resources Information Center

Goerge, Robert; Datta, A. Rupa; Xia, Kanru; Witte, Ann D.; Gennetian, Lisa A.; Milesi, Carolina; Brandon, Richard; Guzman, Lina; Zanoni, Wladimir

2015-01-01

The analyses presented in the Technical Report, "Which Centers Participate in Head Start or Public Pre-Kindergarten" characterize centers that have at least one child whose enrollment is funded through Head Start or Public Pre-K funds. This supplement to the technical report provides interested readers with technical details of the…

An Appraisal of the Industrial Cooperative Education Program Based on Responses from Students and Employers. Supplemental Report No. 3: The Women Students.

ERIC Educational Resources Information Center

Freeman, Nancy S.

As part of a study appraising the industrial cooperative education program at Macomb County Community College (MCCC), 54 women enrolled from 1970 to 1975 in Design and Mechanical Technology and Graphic and Commercial Arts programs, and their employers were surveyed. A comparison of the 30 women in the cooperative programs and the 24 non co-op…

Ceramic regenerator systems development program. [for automobile gas turbine engines

NASA Technical Reports Server (NTRS)

Cook, J. A.; Fucinari, C. A.; Lingscheit, J. N.; Rahnke, C. J.

1977-01-01

Ceramic regenerator cores are considered that can be used in passenger car gas turbine engines, Stirling engines, and industrial/truck gas turbine engines. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability test in Ford 707 industrial gas turbine engines. The results of 19,600 hours of turbine engine durability testing are described. Two materials, aluminum silicate and magnesium aluminum silicate, continue to show promise toward achieving the durability objectives of this program. A regenerator core made from aluminum silicate showed minimal evidence of chemical attack damage after 6935 hours of engine test at 800 C and another showed little distress after 3510 hours at 982 C. Results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are also included.

Chemical vapor infiltration of TiB{sub 2} fibrous composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Besmann, T.M.

1997-04-01

This program is designed to develop a Hall-Heroult aluminum smelting cathode with substantially improved properties. The carbon cathodes in current use require significant anode-to-cathode spacing in order to prevent shorting, causing significant electrical inefficiencies. This is due to the non-wettability of carbon by aluminum which causes instability in the cathodic aluminum pad. It is suggested that a fiber reinforced-TiB{sub 2} matrix composite would have the requisite wettability, strength, strain-to-failure, cost, and lifetime to solve this problem. The approach selected to fabricate such a cathode material is chemical vapor infiltration (CVI). This process produces high purity matrix TiB{sub 2} without damagingmore » the relatively fragile fibers. The program is designed to evaluate potential fiber reinforcements, fabricate test specimens, and scale the process to provide demonstration components.« less

Iterative design, implementation and evaluation of a supplemental feeding program for underweight children ages 6-59 months in Western Uganda.

PubMed

Jilcott, Stephanie B; Ickes, Scott B; Ammerman, Alice S; Myhre, Jennifer A

2010-03-01

In this paper we describe the development, implementation, evaluation, and subsequent improvements of a supplemental feeding program that provides community-based care to underweight children in a rural East African setting, using a locally-sourced and produced ready-to-use food (RUF). Production teams were trained to grind soybeans and groundnuts (peanuts), which were then mixed with moringa oleifera leaf powder to form an energy-dense supplemental food, designed for use as an RUF. Eligible children (based on low weight-for-age or mid-upper-arm circumference < 12 cm) received RUF of approximately 682 kcal per day for five weeks. Weekly growth monitoring and caregiver education were provided by trained health center staff and community volunteers. The program was evaluated by examining RUF nutrient composition, weight gain velocity, and qualitative data from key-informant interviews and home feeding observations. Locally-produced RUF had similar energy density but higher protein content than commercial RUTF (ready-to-use therapeutic food). Mean weight gain of children was 2.5 g/kg/day (range 0.9-6.0). Feeding observations revealed that caregivers were diluting the RUF fed to children. Production team members desired increased financial compensation for their work but were enthusiastic about the program as helpful to malnourished children. Locally-produced RUF is a promising strategy for community-based care of moderately malnourished children. Through the production team's entrepreneurship, a small business was formed, whereby financial incentives encouraged continued RUF production. Future efforts are needed to educate caregivers on correct RUF use and improve commercial viability in local markets.

Relationship between aluminum stress and caffeine biosynthesis in suspension cells of Coffea arabica L.

PubMed

Pech-Kú, Roberto; Muñoz-Sánchez, J Armando; Monforte-González, Miriam; Vázquez-Flota, Felipe; Rodas-Junco, Beatriz A; González-Mendoza, Víctor M; Hernández-Sotomayor, S M Teresa

2018-04-01

Toxicity by aluminum is a growth-limiting factor in plants cultivated in acidic soils. This metal also promotes signal transduction pathways leading to the biosynthesis of defense compounds, including secondary metabolites. In this study, we observed that Coffea arabica L. cells that were kept in the dark did not produce detectable levels of caffeine. However, irradiation with light and supplementation of the culture medium with theobromine were the best conditions for cell maintenance to investigate the role of aluminum in caffeine biosynthesis. The addition of theobromine to the cells did not cause any changes to cell growth and was useful for the bioconversion of theobromine to caffeine. During a short-term AlCl 3 -treatment (500μM) of C. arabica cells kept under light irradiation, increases in the caffeine levels in samples that were recovered from both the cells and culture media were evident. This augmentation coincided with increases in the enzyme activity of caffeine synthase (CS) and the transcript level of the gene encoding this enzyme (CS). Together, these results suggest that actions by Al and theobromine on the same pathway lead to the induction of caffeine biosynthesis. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of Aluminum Treatment on Proteomes of Radicles of Seeds Derived from Al-Treated Tomato Plants

PubMed Central

Okekeogbu, Ikenna; Ye, Zhujia; Sangireddy, Sasikiran Reddy; Li, Hui; Bhatti, Sarabjit; Hui, Dafeng; Zhou, Suping; Howe, Kevin J.; Fish, Tara; Yang, Yong; Thannhauser, Theodore W.

2014-01-01

Aluminum (Al) toxicity is a major constraint to plant growth and crop yield in acid soils. Tomato cultivars are especially susceptible to excessive Al3+ accumulated in the root zone. In this study, tomato plants were grown in a hydroponic culture system supplemented with 50 µM AlK(SO4)2. Seeds harvested from Al-treated plants contained a significantly higher Al content than those grown in the control hydroponic solution. In this study, these Al-enriched tomato seeds (harvested from Al-treated tomato plants) were germinated in 50 µM AlK(SO4)2 solution in a homopiperazine-1,4-bis(2-ethanesulfonic acid) buffer (pH 4.0), and the control solution which contained the buffer only. Proteomes of radicles were analyzed quantitatively by mass spectrometry employing isobaric tags for relative and absolute quantitation (iTRAQ®). The proteins identified were assigned to molecular functional groups and cellular metabolic pathways using MapMan. Among the proteins whose abundance levels changed significantly were: a number of transcription factors; proteins regulating gene silencing and programmed cell death; proteins in primary and secondary signaling pathways, including phytohormone signaling and proteins for enhancing tolerance to abiotic and biotic stress. Among the metabolic pathways, enzymes in glycolysis and fermentation and sucrolytic pathways were repressed. Secondary metabolic pathways including the mevalonate pathway and lignin biosynthesis were induced. Biological reactions in mitochondria seem to be induced due to an increase in the abundance level of mitochondrial ribosomes and enzymes in the TCA cycle, electron transport chains and ATP synthesis. PMID:28250376

Alcoa: Plant-Wide Energy Assessment Finds Potential Savings at Aluminum Extrusion Facility. Industrial Technologies Program, Aluminum BestPractices Plant-Wide Assessment Case Study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2003-09-01

Alcoa completed an energy assessment of its Engineered Products aluminum extrusion facility in Plant City, Florida, in 2001. The company identified energy conservation opportunities throughout the plant and prepared a report as an example for performing energy assessments at similar Alcoa facilities. If implemented, the cost of energy for the plant would be reduced by more than$800,000 per year by conserving 3 million kWh of electricity and 150,000 MMBtu of natural gas.

45 CFR 2522.950 - What requirements and qualifications apply if my program focuses on supplemental academic support...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false What requirements and qualifications apply if my program focuses on supplemental academic support activities other than tutoring? 2522.950 Section 2522.950... § 2522.950 What requirements and qualifications apply if my program focuses on supplemental academic...

45 CFR 2522.950 - What requirements and qualifications apply if my program focuses on supplemental academic support...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false What requirements and qualifications apply if my program focuses on supplemental academic support activities other than tutoring? 2522.950 Section 2522.950... § 2522.950 What requirements and qualifications apply if my program focuses on supplemental academic...

45 CFR 2522.950 - What requirements and qualifications apply if my program focuses on supplemental academic support...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false What requirements and qualifications apply if my program focuses on supplemental academic support activities other than tutoring? 2522.950 Section 2522.950... § 2522.950 What requirements and qualifications apply if my program focuses on supplemental academic...

45 CFR 2522.950 - What requirements and qualifications apply if my program focuses on supplemental academic support...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false What requirements and qualifications apply if my program focuses on supplemental academic support activities other than tutoring? 2522.950 Section 2522.950... § 2522.950 What requirements and qualifications apply if my program focuses on supplemental academic...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

Cathode for a hall-heroult type electrolytic cell for producing aluminum

DOEpatents

Brown, Craig W.

2004-04-13

A method of producing aluminum from alumina in an electrolytic cell including using a cathode comprised of a base material having low electrical conductivity and wettable with molten aluminum to form a reaction layer having a high electrical conductivity on said base layer and a cathode bar extending from said reaction layer through said base material to conduct electrical current from said reaction layer.

Developing supplemental activities for primary health care maternity services.

PubMed

Panitz, E

1990-12-01

Supplemental health care activities are described in the context of the augmented product. The potential benefits of supplemental services to recipients and provider are discussed. The author describes a study that was the basis for (re)developing a supplemental maternity service. The implementation of the results in terms of changes in the marketing mix of this supplemental program is discussed. The effects of the marketing mix changes on program participation are presented.

An Analysis of Academic Assistance Programs on At-Risk Students at the United States Naval Academy

DTIC Science & Technology

2005-06-01

ADDRESS(ES) N/ A 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the...programs are available to these students. In particular, the Naval Academy administers a program known as the Midshipmen Group Study Program, which...is based on the supplemental instruction model. This study examines the impact of participation in each of these programs as a determinant to

Systems study of transport aircraft incorporating advanced aluminum alloys

NASA Technical Reports Server (NTRS)

Sakata, I. F.

1982-01-01

A study was performed to quantify the potential benefits of utilizing advanced aluminum alloys in commercial transport aircraft and to define the effort necessary to develop fully the alloys to a viable commercial production capability. The comprehensive investigation (1) established realistic advanced aluminum alloy property goals to maximize aircraft systems effectiveness (2) identified performance and economic benefits of incorporating the advanced alloy in future advanced technology commercial aircraft designs (3) provided a recommended plan for development and integration of the alloys into commercial aircraft production (4) provided an indication of the timing and investigation required by the metal producing industry to support the projected market and (5) evaluate application of advanced aluminum alloys to other aerospace and transit systems as a secondary objective. The results of the investigation provided a roadmap and identified key issues requiring attention in an advanced aluminum alloy and applications technology development program.

Thin-film ultraviolet detector and spectrometer

NASA Technical Reports Server (NTRS)

Lewicki, G. W.; Maserjian, J.

1972-01-01

Typical metal-insulator-metal detector device is formed on quartz substrate. Base electrode is 3 to 6 nm aluminum layer, overcoated with 3 to 6 nm aluminum oxide or aluminum nitride, and capped with counter electrode of gold, lead, magnesium, or aluminum. Photoelectric yield data are given for Al-AlN-Au structure.

Generalized Fluid System Simulation Program, Version 5.0-Educational. Supplemental Information for NASA/TM-2011-216470. Supplement

NASA Technical Reports Server (NTRS)

Majumdar, A. K.

2011-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems. This supplement gives the input and output data files for the examples.

Effects of Forged Stock and Pure Aluminum Coating on Cryogenic Performance of Heat Treated Aluminum Mirrors

NASA Technical Reports Server (NTRS)

Toland, Ronald W.; Ohl, Raymond G.; Barthelmy, Michael P.; Zewari, S. Wahid; Greenhouse, Matthew A.; MacKenty, John W.

2003-01-01

We present the results of an on-going test program designed to empirically determine the effects of different stress relief procedures for aluminum mirrors. Earlier test results identified a preferred heat treatment for flat and spherical mirrors diamond turned from blanks cut out of Al 6061-T651 plate stock. Further tests have been performed on mirrors from forged stock and one set from plate stock coated with Alumiplate(trademark) aluminum coating to measure the effect of these variables on cryogenic performance. The mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for three thermal cycles. We correlate the results of our optical testing with heat treatment and metallographic data.

Interferometric phase measurement of zerodur, aluminum and SXA mirrors at cryogenic temperatures

NASA Technical Reports Server (NTRS)

Magner, Thomas J.; Barney, Richard D.

1988-01-01

A research program was undertaken to determine the surface figure error of several different types of mirrors at cryogenic temperatures. Two-inch diameter parabolic, spherical and flat mirrors were fabricated from zerodur, aluminum and a metal matrix composite of silicon carbide reinforced aluminum (SXA). The ratio of silicon carbide to aluminum was selected so that the coefficient of thermal expansion (CTE) of the metal matrix matched electroless nickel. A liquuid helium dewar was modified to add an interferometric grade window, a cold electronic shutter and a strain-free copper mirror mount. Interferometric phase measurements on each mirror mounted in the dewar were made without the window, with the window, under vacuum, at around 80K and between 10K and 24K.

A study of trends and techniques for space base electronics

NASA Technical Reports Server (NTRS)

Trotter, J. D.; Wade, T. E.; Gassaway, J. D.; Mahmood, Q.

1978-01-01

A sputtering system was developed to deposit aluminum and aluminum alloys by the dc sputtering technique. This system is designed for a high level of cleanliness and for monitoring the deposition parameters during film preparation. This system is now ready for studying the deposition and annealing parameters upon double-level metal preparation. A technique recently applied for semiconductor analysis, the finite element method, was studied for use in the computer modeling of two dimensional MOS transistor structures. It was concluded that the method has not been sufficiently well developed for confident use at this time. An algorithm was developed for confident use at this time. An algorithm was developed for implementing a computer study which is based upon the finite difference method. The program which was developed was modified and used to calculate redistribution data for boron and phosphorous which had been predeposited by ion implantation with range and straggle conditions. Data were generated for 111 oriented SOS films with redistribution in N2, dry O2 and steam ambients.

Trends and techniques for space base electronics. [mathematical models, ion implantation, and semiconductors

NASA Technical Reports Server (NTRS)

Gassaway, J. D.; Mahmood, Q.; Trotter, J. D.

1978-01-01

A system was developed for depositing aluminum and aluminum alloys by the D.C. sputtering technique. This system which was designed for a high level of cleanliness and ion monitoring the deposition parameters during film preparation is ready for studying the deposition and annealing parameters upon double level metal preparation. The finite element method was studied for use in the computer modeling of two dimensional MOS transistor structures. An algorithm was developed for implementing a computer study which is based upon the finite difference method. The program was modified and used to calculate redistribution data for boron and phosphorous which had been predeposited by ion implantation with range and straggle conditions typical of those used at MSFC. Data were generated for 111 oriented SOS films with redistribution in N2, dry O2 and steam ambients. Data are given showing both two dimensional effects and the evolution of the junction depth, sheet resistance and integrated dose with redistribution time.

75 FR 62841 - Award of a Single-Source Program Expansion Supplement to Chapel Hill Training Outreach Project, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

...-Based Child Abuse Prevention Program (NRCCBCAP), to support technical assistance and support for the... accessible manner. FOR FURTHER INFORMATION CONTACT: Melissa Brodowski, Office on Child Abuse and Neglect... DEPARTMENT OF HEALTH AND HUMAN SERVICES Administration For Children and Families Award of a Single...

After-School Program Implementation in Urban Environments: Increasing Engagement among Adolescent Youth

ERIC Educational Resources Information Center

Pelcher, Allison; Rajan, Sonali

2016-01-01

Background: After-school programs (ASPs) play a crucial role in supplementing the present school day. However, implementing ASPs in the urban environment and among adolescents (grades 6-12) poses unique challenges. The purpose of this study was to conduct a systematic literature review to identify evidence-based barriers and facilitators to…

Academic Peer Instruction: Reference and Training Manual (with Answers)

ERIC Educational Resources Information Center

Zaritsky, Joyce; Toce, Andi

2013-01-01

This manual consists of an introduction to our Academic Peer Instruction (API) program at LaGuardia Community College, a compilation of the materials we have developed and use for training of our tutors (with answers), and a bibliography. API is based on an internationally recognized peer tutoring program, Supplemental Instruction. (Contains 6…

78 FR 33132 - Quality Verification for Plate-Type Uranium-Aluminum Fuel Elements for Use in Research and Test...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-03

... Fuel Elements for Use in Research and Test Reactors AGENCY: Nuclear Regulatory Commission. ACTION... Research and Test Reactors.'' This guide describes a method that the staff of the NRC considers acceptable... assurance program for verifying the quality of plate-type uranium-aluminum fuel elements used in research...

On Supplementing “Foot in the Door” Incentives for eHealth Program Engagement

PubMed Central

2014-01-01

Financial health incentives, such as paying people to lose weight, are being widely implemented by Western nations and large corporations. A growing number of studies have tested the impact of incentives on health behaviors, though few have evaluated the approach on a population-scale. In this issue of the Journal of Medical Internet Research, Liu et al add to the evidence-base by examining whether a single incentive can motivate enrollment and engagement in a preventive eHealth program in a sample of 142,726 Canadian adults. While the incentives increased enrollment significantly (by a factor of about 28), a very high level of program attrition was noted (90%). The “foot in the door” incentive technique employed was insufficient; enrollees received incentives for signing-up for, but not for engaging with, the eHealth program. To supplement this technique and drive sustained behavior change, several theoretically- and empirically-based strategies are proposed. Specifically, incentives indexed to behavioral achievements over time are highlighted as one approach to boost engagement in this population in the future. PMID:25092221

7 CFR 2201.29 - Supplemental guarantees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Supplemental guarantees. 2201.29 Section 2201.29 Agriculture Regulations of the Department of Agriculture (Continued) LOCAL TELEVISION LOAN GUARANTEE BOARD LOCAL TELEVISION LOAN GUARANTEE PROGRAM-PROGRAM REGULATIONS Loan Guarantees § 2201.29 Supplemental...

Phase Transitions in Aluminum Under Shockless Compression at the Z Machine

NASA Astrophysics Data System (ADS)

Davis, Jean-Paul; Brown, Justin; Shulenburger, Luke; Knudson, Marcus

2017-06-01

Aluminum 6061 alloy has been used extensively as an electrode material in shockless ramp-wave experiments at the Z Machine. Previous theoretical work suggests that the principal quasi-isentrope in aluminum should pass through two phase transitions at multi-megabar pressures, first from the ambient fcc phase to hcp at around 200 GPa, then to bcc at around 320 GPa. Previous static measurements in a diamond-anvil cell have detected the hcp phase above 200 GPa along the room-temperature isentherm. Recent laser-based dynamic compression experiments have observed both the hcp and bcc phases using X-ray diffraction. Here we present high-accuracy velocity waveform data taken on pure and alloy aluminum materials at the Z Machine under shockless compression with 200-ns rise-time to 400 GPa using copper electrodes and lithium-fluoride windows. These are compared to recent EOS tables developed at Los Alamos National Laboratory, to our own results from diffusion quantum Monte-Carlo calculations, and to multi-phase EOS models with phase-transition kinetics. We find clear evidence of a fast transition around 200 GPa as expected, and a possible suggestion of a slower transition at higher pressure. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE AC04-94AL85000.

Supplemental Instruction (SI) at the Faculty of Engineering (LTH), Lund University, Sweden. An Evaluation of the SI-Program at Five LTH Engineering Programs Autumn 2008

ERIC Educational Resources Information Center

Malm, Joakim; Bryngfors, Leif E.; Mörner, Lise-Lotte

2010-01-01

The study presents an evaluation of the SI program in five engineering programs within the Faculty of Engineering (LTH) based on data from questionnaires to SI participants and SI-Leaders, credits taken by the students during the first year, and average grade data from high school for the first year students. The results show that participation in…

Food and Nutrition Board update: What do SNAP allotments, physical fitness, and obesity prevention have in common?

PubMed

Meyers, Linda D; Murphy, Suzanne P; Yaktine, Ann L

2013-09-01

The Institute of Medicine's Food and Nutrition Board had a productive year, with important expert committee reports on the Supplemental Food Assistance Program, physical fitness, and accelerating obesity prevention efforts that provided grounding for dietary guidance and nutrition policies and programs. This summary describes Food and Nutrition Board activities, including current thinking on dietary reference intakes. The summary also highlights consensus reports on defining and measuring Supplemental Food Assistance Program benefit adequacy and on physical fitness and health outcomes in youth. In addition, current and new activities related to obesity prevention and care are addressed. What do these activities have in common? All adhere to the Institute of Medicine report model by filling gaps and by being analytical, evidence-based, and challenging.

75 FR 66686 - Defense Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... Federal Acquisition Regulation Supplement; Balance of Payments Program Exemption for Commercial... Balance of Payments Program for construction material that is commercial information technology. DATES..., Balance of Payments Program--Construction Material, and 252.225- 7045, Balance of Payments Program...

Aluminum base alloy powder metallurgy process and product

NASA Technical Reports Server (NTRS)

Paris, Henry G. (Inventor)

1986-01-01

A metallurgical method including cooling molten aluminum particles and consolidating resulting solidified particles into a multiparticle body, wherein the improvement comprises the provision of greater than 0.15% of a metal which diffuses in the aluminum solid state at a rate less than that of Mn. Aluminum containing greater than 0.15% of a metal which diffuses in the aluminum solid state at a rate less than that of Mn.

Technological, Economic, and Environmental Optimization of Aluminum Recycling

NASA Astrophysics Data System (ADS)

Ioana, Adrian; Semenescu, Augustin

2013-08-01

The four strategic directions (referring to the entire life cycle of aluminum) are as follows: production, primary use, recycling, and reuse. Thus, in this work, the following are analyzed and optimized: reducing greenhouse gas emissions from aluminum production, increasing energy efficiency in aluminum production, maximizing used-product collection, recycling, and reusing. According to the energetic balance at the gaseous environment level, the conductive transfer model is also analyzed through the finished elements method. Several principles of modeling and optimization are presented and analyzed: the principle of analogy, the principle of concepts, and the principle of hierarchization. Based on these principles, an original diagram model is designed together with the corresponding logic diagram. This article also presents and analyzes the main benefits of aluminum recycling and reuse. Recycling and reuse of aluminum have the main advantage that it requires only about 5% of energy consumed to produce it from bauxite. The aluminum recycling and production process causes the emission of pollutants such as dioxides and furans, hydrogen chloride, and particulate matter. To control these emissions, aluminum recyclers are required to comply with the National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production. The results of technological, economic, and ecological optimization of aluminum recycling are based on the criteria function's evaluation in the modeling system.

Isobaric tags for relative and absolute quantitation (iTRAQ)-based proteomic analysis of Cryptococcus humicola response to aluminum stress.

PubMed

Zhang, Jingjing; Zhang, Lei; Qiu, Jinkui; Nian, Hongjuan

2015-10-01

Cryptococcus humicola is a highly aluminum (Al) tolerant yeast strain isolated from a tea field. Here the relative changes of protein expression in C. humicola undergoing aluminum stress were analyzed to understand the genetic basis of aluminum tolerance. In this work, iTRAQ-based (isobaric tags for relative and absolute quantification) quantitative proteomic technology was used to detect statistically significant proteins associated with the response to aluminum stress. A total of 625 proteins were identified and were mainly involved in translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover/chaperones, energy production and conversion, and amino acid transport and metabolism. Of these proteins, 59 exhibited differential expression during aluminum stress. Twenty-nine proteins up-regulated by aluminum were mainly involved in translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover and chaperones, and lipid transport and metabolism. Thirty proteins down-regulated by aluminum were mainly associated with energy transport and metabolism, translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover/chaperones, and lipid transport and metabolism. The potential functions of some proteins in aluminum tolerance are discussed. These functional changes may be beneficial for cells to protect themselves from aluminum toxic conditions. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Shielding gas effect to diffusion activities of magnesium and copper on aluminum clad

NASA Astrophysics Data System (ADS)

Manurung, Charles SP; Napitupulu, Richard AM

2017-09-01

Aluminum is the second most metal used in many application, because of its corrosion resistance. The Aluminum will be damaged in over time if it’s not maintained in good condition. That is important to give protection to the Aluminums surface. Cladding process is one of surface protection methodes, especially for metals. Aluminum clad copper (Al/Cu) or copper clad aluminum (Cu/Al) composite metals have been widely used for many years. These mature protection method and well tested clad metal systems are used industrially in a variety application. The inherent properties and behavior of both copper and aluminum combine to provide unique performance advantages. In this paper Aluminum 2024 series will be covered with Aluminum 1100 series by hot rolling process. Observations will focus on diffusion activities of Mg and Cu that not present on Aluminum 1100 series. The differences of clad material samples is the use of shielding gas during heating before hot rolling process. The metallurgical characteristics will be examined by using optical microscopy. Transition zone from the interface cannot be observed but from Energy Dispersive Spectrometry it’s found that Mg and Cu are diffused from base metal (Al 2024) to the clad metal (Al 1100). Hardness test proved that base metals hardness to interface was decrease.

Aluminum Nanoholes for Optical Biosensing.

PubMed

Barrios, Carlos Angulo; Canalejas-Tejero, Víctor; Herranz, Sonia; Urraca, Javier; Moreno-Bondi, María Cruz; Avella-Oliver, Miquel; Maquieira, Ángel; Puchades, Rosa

2015-07-09

Sub-wavelength diameter holes in thin metal layers can exhibit remarkable optical features that make them highly suitable for (bio)sensing applications. Either as efficient light scattering centers for surface plasmon excitation or metal-clad optical waveguides, they are able to form strongly localized optical fields that can effectively interact with biomolecules and/or nanoparticles on the nanoscale. As the metal of choice, aluminum exhibits good optical and electrical properties, is easy to manufacture and process and, unlike gold and silver, its low cost makes it very promising for commercial applications. However, aluminum has been scarcely used for biosensing purposes due to corrosion and pitting issues. In this short review, we show our recent achievements on aluminum nanohole platforms for (bio)sensing. These include a method to circumvent aluminum degradation--which has been successfully applied to the demonstration of aluminum nanohole array (NHA) immunosensors based on both, glass and polycarbonate compact discs supports--the use of aluminum nanoholes operating as optical waveguides for synthesizing submicron-sized molecularly imprinted polymers by local photopolymerization, and a technique for fabricating transferable aluminum NHAs onto flexible pressure-sensitive adhesive tapes, which could facilitate the development of a wearable technology based on aluminum NHAs.

Aluminum Nanoholes for Optical Biosensing

PubMed Central

Barrios, Carlos Angulo; Canalejas-Tejero, Víctor; Herranz, Sonia; Urraca, Javier; Moreno-Bondi, María Cruz; Avella-Oliver, Miquel; Maquieira, Ángel; Puchades, Rosa

2015-01-01

Sub-wavelength diameter holes in thin metal layers can exhibit remarkable optical features that make them highly suitable for (bio)sensing applications. Either as efficient light scattering centers for surface plasmon excitation or metal-clad optical waveguides, they are able to form strongly localized optical fields that can effectively interact with biomolecules and/or nanoparticles on the nanoscale. As the metal of choice, aluminum exhibits good optical and electrical properties, is easy to manufacture and process and, unlike gold and silver, its low cost makes it very promising for commercial applications. However, aluminum has been scarcely used for biosensing purposes due to corrosion and pitting issues. In this short review, we show our recent achievements on aluminum nanohole platforms for (bio)sensing. These include a method to circumvent aluminum degradation—which has been successfully applied to the demonstration of aluminum nanohole array (NHA) immunosensors based on both, glass and polycarbonate compact discs supports—the use of aluminum nanoholes operating as optical waveguides for synthesizing submicron-sized molecularly imprinted polymers by local photopolymerization, and a technique for fabricating transferable aluminum NHAs onto flexible pressure-sensitive adhesive tapes, which could facilitate the development of a wearable technology based on aluminum NHAs. PMID:26184330

Investigation of americium-241 metal alloys for target applications. [Alloys with cerium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conner, W.V.

1980-01-01

Several americium-241 metal alloys have been investigated for possible use in the Lawrence Livermore National Laboratory Radiochemical Diagnostic Tracer Program. Alloys investigated have included uranium-americium, aluminum-americium, and cerium-americium. Uranium-americium alloys with the desired properties proved to be difficult to prepare, and work with this alloy was discontinued. Aluminum-americium alloys were much easier to prepare, but the alloy consisted of an aluminum-americium intermetallic compound (AmAl/sub 4/) in an aluminum matrix. This alloy could be cast and formed into shapes, but the low density of aluminum, and other problems; made the alloy unsuitable for the intended application. Americium metal was found tomore » have a high solid solubility in cerium and alloys prepared from these two elements exhibited all of the properties desired for the tracer program application. Cerium-americium alloys containing up to 34 wt % americium have been prepared using both comelting and coreduction techniques. The latter technique involves coreduction of Ce F/sub 4/ and AmF/sub 4/ with calcium metal in a sealed reduction vessel. Casting techniques have been developed for preparing up to eight 0.87 inch (2.2 cm) diameter disks in a single casting, and cerium-americium metal alloy disks containing from 10 to 25 wt % americium-241 have been prepared using these techniques.« less

Casting Characteristics of High Cerium Content Aluminum Alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, D; Rios, O R; Sims, Z C

This paper compares the castability of the near eutectic aluminum-cerium alloy system to the aluminum-silicon and aluminum-copper systems. The alloys are compared based on die filling capability, feeding characteristics and tendency to hot tear in both sand cast and permanent mold applications. The castability ranking of the binary Al–Ce systems is as good as the aluminum-silicon system with some deterioration as additional alloying elements are added. In alloy systems that use cerium in combination with common aluminum alloying elements such as silicon, magnesium and/or copper, the casting characteristics are generally better than the aluminum-copper system. In general, production systems formore » melting, de-gassing and other processing of aluminum-silicon or aluminum-copper alloys can be used without modification for conventional casting of aluminum-cerium alloys.« less

The immunogenicity of thin-film freeze-dried, aluminum salt-adjuvanted vaccine when exposed to different temperatures.

PubMed

Thakkar, Sachin G; Ruwona, Tinashe B; Williams, Robert O; Cui, Zhengrong

2017-04-03

Insoluble aluminum salts such as aluminum oxyhydroxide have been used for decades as adjuvants in human vaccines, and many vaccines contain aluminum salts as adjuvants. Aluminum salt-adjuvanted vaccines must be managed in cold-chain (2-8° C) during transport and storage, as vaccine antigens in general are too fragile to be stable in ambient temperatures, and unintentional slowing freezing causes irreversible aggregation and permanent damage to the vaccines. Previously, we reported that thin-film freeze-drying can be used to convert vaccines adjuvanted with an aluminum salt from liquid suspension into dry powder without causing particle aggregation or decreasing in immunogenicity following reconstitution. In the present study, using ovalbumin (OVA)-adsorbed Alhydrogel® (i.e. aluminum oxyhydroxide, 2% w/v) as a model vaccine, we showed that the immunogenicity of thin-film freeze-dried OVA-adsorbed Alhydrogel® vaccine powder was not significantly changed after it was exposed for an extended period of time in temperatures as high as 40° C or subjected to repeated slow freezing-and-thawing. It is expected that immunization programs can potentially benefit by integrating thin-film freeze-drying into vaccine preparations.

The immunogenicity of thin-film freeze-dried, aluminum salt-adjuvanted vaccine when exposed to different temperatures

PubMed Central

Thakkar, Sachin G.; Ruwona, Tinashe B.; Williams, Robert O.; Cui, Zhengrong

2017-01-01

ABSTRACT Insoluble aluminum salts such as aluminum oxyhydroxide have been used for decades as adjuvants in human vaccines, and many vaccines contain aluminum salts as adjuvants. Aluminum salt-adjuvanted vaccines must be managed in cold-chain (2–8° C) during transport and storage, as vaccine antigens in general are too fragile to be stable in ambient temperatures, and unintentional slowing freezing causes irreversible aggregation and permanent damage to the vaccines. Previously, we reported that thin-film freeze-drying can be used to convert vaccines adjuvanted with an aluminum salt from liquid suspension into dry powder without causing particle aggregation or decreasing in immunogenicity following reconstitution. In the present study, using ovalbumin (OVA)-adsorbed Alhydrogel® (i.e. aluminum oxyhydroxide, 2% w/v) as a model vaccine, we showed that the immunogenicity of thin-film freeze-dried OVA-adsorbed Alhydrogel® vaccine powder was not significantly changed after it was exposed for an extended period of time in temperatures as high as 40° C or subjected to repeated slow freezing-and-thawing. It is expected that immunization programs can potentially benefit by integrating thin-film freeze-drying into vaccine preparations. PMID:28051903

System integration and demonstration of adhesive bonded high temperature aluminum alloys for aerospace structure, phase 2

NASA Technical Reports Server (NTRS)

Falcone, Anthony; Laakso, John H.

1993-01-01

Adhesive bonding materials and processes were evaluated for assembly of future high-temperature aluminum alloy structural components such as may be used in high-speed civil transport aircraft and space launch vehicles. A number of candidate high-temperature adhesives were selected and screening tests were conducted using single lap shear specimens. The selected adhesives were then used to bond sandwich (titanium core) test specimens, adhesive toughness test specimens, and isothermally aged lap shear specimens. Moderate-to-high lap shear strengths were obtained from bonded high-temperature aluminum and silicon carbide particulate-reinforced (SiC(sub p)) aluminum specimens. Shear strengths typically exceeded 3500 to 4000 lb/in(sup 2) and flatwise tensile strengths exceeded 750 lb/in(sup 2) even at elevated temperatures (300 F) using a bismaleimide adhesive. All faceskin-to-core bonds displayed excellent tear strength. The existing production phosphoric acid anodize surface preparation process developed at Boeing was used, and gave good performance with all of the aluminum and silicon carbide particulate-reinforced aluminum alloys investigated. The results of this program support using bonded assemblies of high-temperature aluminum components in applications where bonding is often used (e.g., secondary structures and tear stoppers).

Design, process development, manufacture, test and evaluation of boron-aluminum for space shuttle components

NASA Technical Reports Server (NTRS)

Garrett, R. A.; Niemann, J. T.; Otto, O. R.; Brown, N. M.; Heinrich, R. E.

1973-01-01

A multi phase boron-aluminum design and evaluation program for space shuttle components was conducted, culminating in the fabrication of a 1.22 m (48 inch) x 1.83 m (72 inch) boron-aluminum compression panel capable of distributing a point load of 1555 kN (350,000 lbs) into a uniform running load at a temperature of 589 K (600 F). This panel was of the skin-stringer construction with two intermediate frame supports; seven unidirectional stringers varied in thickness from 5 plies to 52 plies and the skin was contoured to thicknesses ranging from 10 plies to 62 plies. Both the stringers and the skin incorporated Ti-6Al-4V titanium interleaves to increase bearing and in-plane shear strength. The discrete program phases were materials evaluation, design studies, process technology development, fabrication and assembly, and test and evaluation.

Effects of participation in the WIC program on birthweight: evidence from the National Longitudinal Survey of Youth. Special Supplemental Nutrition Program for Women, Infants, and Children.

PubMed

Kowaleski-Jones, Lori; Duncan, Greg J

2002-05-01

This study sought to estimate the impact on birthweight of maternal participation in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC). WIC estimates were based on sibling models incorporating data on children born between 1990 and 1996 to women taking part in the National Longitudinal Survey of Youth. Fixed-effects estimates indicated that prenatal WIC participation was associated with a 0.075 unit difference (95% confidence interval [CI] = -0.007, 0.157) in siblings' logged birthweight. At the 88-oz (2464-g) low-birthweight cutoff, this difference translated into an estimated impact of 6.6 oz (184.8 g). Earlier WIC impact estimates may have been biased by unmeasured characteristics affecting both program participation and birth outcomes. Our approach controlled for such biases and revealed a significant positive association between WIC participation and birthweight.

The electro-thermal stability of tantalum relative to aluminum and titanium in cylindrical liner ablation experiments at 550 kA

NASA Astrophysics Data System (ADS)

Steiner, Adam M.; Campbell, Paul C.; Yager-Elorriaga, David A.; Cochrane, Kyle R.; Mattsson, Thomas R.; Jordan, Nicholas M.; McBride, Ryan D.; Lau, Y. Y.; Gilgenbach, Ronald M.

2018-03-01

Presented are the results from the liner ablation experiments conducted at 550 kA on the Michigan Accelerator for Inductive Z-Pinch Experiments. These experiments were performed to evaluate a hypothesis that the electrothermal instability (ETI) is responsible for the seeding of magnetohydrodynamic instabilities and that the cumulative growth of ETI is primarily dependent on the material-specific ratio of critical temperature to melting temperature. This ratio is lower in refractory metals (e.g., tantalum) than in non-refractory metals (e.g., aluminum or titanium). The experimental observations presented herein reveal that the plasma-vacuum interface is remarkably stable in tantalum liner ablations. This stability is particularly evident when contrasted with the observations from aluminum and titanium experiments. These results are important to various programs in pulsed-power-driven plasma physics that depend on liner implosion stability. Examples include the magnetized liner inertial fusion (MagLIF) program and the cylindrical dynamic material properties program at Sandia National Laboratories, where liner experiments are conducted on the 27-MA Z facility.

Validation of Rehabilitation Training Programs for Older Drivers

DOT National Transportation Integrated Search

2013-04-01

This project studied the effectiveness of four interventions designed to bolster safe performance among healthy older : drivers: (1) Classroom driver education with supplemental behind-the-wheel instruction; (2) Computer-based exercises : to improve ...

Advantages of Oxide Films as Bases for Aluminum Pigmented Surface Coatings for Aluminum Alloys

NASA Technical Reports Server (NTRS)

Buzzard, R W; Mutchler, W H

1931-01-01

Both laboratory and weather-exposure corrosion tests showed conclusively that the protection afforded by aluminum pigmented spar varnish coatings applied to previously anodized aluminum surfaces was greatly superior to that afforded by the same coatings applied to surfaces which had simply been cleaned free from grease and not anodized.

Testing piezoelectric sensors in a nuclear reactor environment

NASA Astrophysics Data System (ADS)

Reinhardt, Brian T.; Suprock, Andy; Tittmann, Bernhard

2017-02-01

Several Department of Energy Office of Nuclear Energy (DOE-NE) programs, such as the Fuel Cycle Research and Development (FCRD), Advanced Reactor Concepts (ARC), Light Water Reactor Sustainability, and Next Generation Nuclear Power Plants (NGNP), are investigating new fuels, materials, and inspection paradigms for advanced and existing reactors. A key objective of such programs is to understand the performance of these fuels and materials during irradiation. In DOE-NE's FCRD program, ultrasonic based technology was identified as a key approach that should be pursued to obtain the high-fidelity, high-accuracy data required to characterize the behavior and performance of new candidate fuels and structural materials during irradiation testing. The radiation, high temperatures, and pressure can limit the available tools and characterization methods. In this work piezoelectric transducers capable of making these measurements are developed. Specifically, three piezoelectric sensors (Bismuth Titanate, Aluminum Nitride, and Zinc Oxide) are tested in the Massachusetts Institute of Technology Research reactor to a fast neutron fluence of 8.65×1020 nf/cm2. It is demonstrated that Bismuth Titanate is capable of transduction up to 5 × 1020 nf/cm2, Zinc Oxide is capable of transduction up to at least 6.27 × 1020 nf/cm2, and Aluminum Nitride is capable of transduction up to at least 8.65 × 1020 nf/cm2.

Ferroelectric transistors with monolayer molybdenum disulfide and ultra-thin aluminum-doped hafnium oxide

NASA Astrophysics Data System (ADS)

Yap, Wui Chung; Jiang, Hao; Liu, Jialun; Xia, Qiangfei; Zhu, Wenjuan

2017-07-01

In this letter, we demonstrate ferroelectric memory devices with monolayer molybdenum disulfide (MoS2) as the channel material and aluminum (Al)-doped hafnium oxide (HfO2) as the ferroelectric gate dielectric. Metal-ferroelectric-metal capacitors with 16 nm thick Al-doped HfO2 are fabricated, and a remnant polarization of 3 μC/cm2 under a program/erase voltage of 5 V is observed. The capability of potential 10 years data retention was estimated using extrapolation of the experimental data. Ferroelectric transistors based on embedded ferroelectric HfO2 and MoS2 grown by chemical vapor deposition are fabricated. Clockwise hysteresis is observed at low program/erase voltages due to slow bulk traps located near the 2D/dielectric interface, while counterclockwise hysteresis is observed at high program/erase voltages due to ferroelectric polarization. In addition, the endurances of the devices are tested, and the effects associated with ferroelectric materials, such as the wake-up effect and polarization fatigue, are observed. Reliable writing/reading in MoS2/Al-doped HfO2 ferroelectric transistors over 2 × 104 cycles is achieved. This research can potentially lead to advances of two-dimensional (2D) materials in low-power logic and memory applications.

Sake Protein Supplementation Affects Exercise Performance and Biochemical Profiles in Power-Exercise-Trained Mice

PubMed Central

Chen, Yi-Ming; Lin, Che-Li; Wei, Li; Hsu, Yi-Ju; Chen, Kuan-Neng; Huang, Chi-Chang; Kao, Chin-Hsung

2016-01-01

Exercise and fitness training programs have attracted the public’s attention in recent years. Sports nutrition supplementation is an important issue in the global sports market. Purpose: In this study, we designed a power exercise training (PET) program with a mouse model based on a strength and conditional training protocol for humans. We tested the effect of supplementation with functional branched-chain amino acid (BCAA)-rich sake protein (SP) to determine whether the supplement had a synergistic effect during PET and enhanced athletic performance and resistance to fatigue. Methods: Male ICR mice were divided into three groups (n = 8 per group) for four-week treatment: sedentary controls with vehicle (SC), and PET and PET groups with SP supplementation (3.8 g/kg, PET + SP). Exercise performance was evaluated by forelimb grip strength and exhaustive swimming time as well as changes in body composition and anti-fatigue activity levels of serum lactate, ammonia, glucose, and creatine kinase (CK) after a 15-min swimming exercise. The biochemical parameters were measured at the end of the experiment. Results: four-week PET significantly increased grip strength and exhaustive swimming time and decreased epididymal fat pad (EFP) weight and area. Levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, and uric acid (UA) were significantly increased. PET + SP supplementation significantly decreased serum lactate, ammonia and CK levels after the 15-min swimming exercise. The resting serum levels of AST, ALT, CREA and UA were all significantly decreased with PET + SP. Conclusion: The PET program could increase the exercise performance and modulate the body composition of mice. PET with SP conferred better anti-fatigue activity, improved biochemical profiles, and may be an effective ergogenic aid in strength training. PMID:26907336

Sake Protein Supplementation Affects Exercise Performance and Biochemical Profiles in Power-Exercise-Trained Mice.

PubMed

Chen, Yi-Ming; Lin, Che-Li; Wei, Li; Hsu, Yi-Ju; Chen, Kuan-Neng; Huang, Chi-Chang; Kao, Chin-Hsung

2016-02-20

Exercise and fitness training programs have attracted the public's attention in recent years. Sports nutrition supplementation is an important issue in the global sports market. In this study, we designed a power exercise training (PET) program with a mouse model based on a strength and conditional training protocol for humans. We tested the effect of supplementation with functional branched-chain amino acid (BCAA)-rich sake protein (SP) to determine whether the supplement had a synergistic effect during PET and enhanced athletic performance and resistance to fatigue. Male ICR mice were divided into three groups (n = 8 per group) for four-week treatment: sedentary controls with vehicle (SC), and PET and PET groups with SP supplementation (3.8 g/kg, PET + SP). Exercise performance was evaluated by forelimb grip strength and exhaustive swimming time as well as changes in body composition and anti-fatigue activity levels of serum lactate, ammonia, glucose, and creatine kinase (CK) after a 15-min swimming exercise. The biochemical parameters were measured at the end of the experiment. four-week PET significantly increased grip strength and exhaustive swimming time and decreased epididymal fat pad (EFP) weight and area. Levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, and uric acid (UA) were significantly increased. PET + SP supplementation significantly decreased serum lactate, ammonia and CK levels after the 15-min swimming exercise. The resting serum levels of AST, ALT, CREA and UA were all significantly decreased with PET + SP. The PET program could increase the exercise performance and modulate the body composition of mice. PET with SP conferred better anti-fatigue activity, improved biochemical profiles, and may be an effective ergogenic aid in strength training.

Reconceiving SNAP: Is Nutritional Assistance Really Income Support?

ERIC Educational Resources Information Center

Besharov, Douglas J.

2016-01-01

Since its creation, the Supplemental Nutrition Assistance Program (SNAP) has changed from an antihunger program to an income-supplementation program. Because the program (and its predecessor Food Stamp Program) was not designed for this purpose, the result is a program that has many unintended and, many believe, negative effects. The key challenge…

Vacuum Head Checks Foam/Substrate Bonds

NASA Technical Reports Server (NTRS)

Lloyd, James F.

1989-01-01

Electromechanical inspection system quickly gives measurements indicating adhesion, or lack thereof, between rigid polyurethane foam and aluminum substrate. Does not damage inspected article, easy to operate, and used to perform "go/no-go" evaluations or as supplement to conventional destructive pull-plug testing. Applies vacuum to small area of foam panel and measures distance through which foam pulled into vacuum. Probe head applied to specimen and evacuated through hose to controller/monitor unit. Digital voltmeter in unit reads deflection of LVDT probe head.

Increased natural reproduction and genetic diversity one generation after cessation of a steelhead trout (Oncorhynchus mykiss) conservation hatchery program.

PubMed

Berejikian, Barry A; Van Doornik, Donald M

2018-01-01

Spatial and temporal fluctuations in productivity and abundance confound assessments of captive propagation programs aimed at recovery of Threatened and Endangered populations. We conducted a 17 year before-after-control-impact experiment to determine the effects of a captive rearing program for anadromous steelhead trout (Oncorhynchus mykiss) on a key indicator of natural spawner abundance (naturally produced nests or 'redds'). The supplemented population exhibited a significant (2.6-fold) increase in redd abundance in the generation following supplementation. Four non-supplemented (control) populations monitored over the same 17 year period exhibited stable or decreasing trends in redd abundance. Expected heterozygosity in the supplemented population increased significantly. Allelic richness increased, but to a lesser (non-significant) degree. Estimates of the effective number of breeders increased from a harmonic mean of 24.4 in the generation before supplementation to 38.9 after supplementation. Several non-conventional aspects of the captive rearing program may have contributed to the positive response in the natural population.

Electrotransfer in Liquid Binary Aluminum Alloys

NASA Astrophysics Data System (ADS)

Tekuchev, V. V.; Kalinkin, D. P.; Ivanova, I. V.

2018-07-01

The mobility of ions in a liquid binary metal system based on aluminum is calculated for the first time in a wide range of concentrations, based on studies of its resistivity and self-diffusion coefficient. It is established that in an Al-Cu system, the ions of aluminum move to the anode, while Al-Mg, Al-Sn, and Al-Sb move to the cathode; i.e., there is inversion of the electrotransfer of aluminum ions. When the concentration of a component is reduced, the mobility of its ions is increased by the module.

Design and research on discharge performance for aluminum-air battery

NASA Astrophysics Data System (ADS)

Liu, Zu; Zhao, Junhong; Cai, Yanping; Xu, Bin

2017-01-01

As a kind of clean energy, the research of aluminum air battery is carried out because aluminum-air battery has advantages of high specific energy, silence and low infrared. Based on the research on operating principle of aluminum-air battery, a novel aluminum-air battery system was designed composed of aluminum-air cell and the circulation system of electrolyte. A system model is established to analyze the polarization curve, the constant current discharge performance and effect of electrolyte concentration on the performance of monomer. The experimental results show that the new energy aluminum-air battery has good discharge performance, which lays a foundation for its application.

Genetic assessment of a summer chum salmon metapopulation in recovery

PubMed Central

Small, Maureen P; Johnson, Thom H; Bowman, Cherril; Martinez, Edith

2014-01-01

Programs to rebuild imperiled wild fish populations often include hatchery-born fish derived from wild populations to supplement natural spawner abundance. These programs require monitoring to determine their demographic, biological, and genetic effects. In 1990s in Washington State, the Summer Chum Salmon Conservation Initiative developed a recovery program for the threatened Hood Canal summer chum salmon Evolutionarily Significant Unit (ESU) (the metapopulation) that used in-river spawners (wild fish) for each respective supplementation broodstock in six tributaries. Returning spawners (wild-born and hatchery-born) composed subsequent broodstocks, and tributary-specific supplementation was limited to three generations. We assessed impacts of the programs on neutral genetic diversity in this metapopulation using 16 microsatellite loci and a thirty-year dataset spanning before and after supplementation, roughly eight generations. Following supplementation, differentiation among subpopulations decreased (but not significantly) and isolation by distance patterns remained unchanged. There was no decline in genetic diversity in wild-born fish, but hatchery-born fish sampled in the same spawning areas had significantly lower genetic diversity and unequal family representation. Despite potential for negative effects from supplementation programs, few were detected in wild-born fish. We hypothesize that chum salmon natural history makes them less vulnerable to negative impacts from hatchery supplementation. PMID:24567747

ARPA/NRL X-Ray Laser Program

DTIC Science & Technology

1977-04-01

aluminum ) is photographed using a double-pinhole x-ray camera. Fig. 21 shows , 45 —.— LASER >1.0keV LASER >1.5keV 100 /im Fig. 21 — Pinhole x...i ’ 1 i 6.0 7.0 Ml) 8.0 Fig. 29 — Comparison of computed spectral line intensities of aluminum and that obtained from the experiment 56...Mg-target used in this partic- ular exposure contained aluminum and carbon as impurities; the AJ6II 3-3p 1P - 3s2 1S line at 1670.8 A and the CIV 2p

Supplement to the ICRPG turbulent boundary layer nozzle analysis computer program

NASA Technical Reports Server (NTRS)

Omori, S.; Gross, K. W.

1972-01-01

A supplement is presented for a turbulent boundary layer nozzle analysis computer program. It describes the program calculation sequence and presents a detailed documentation of each subroutine. Important equations are derived explicitly, and improvements to the program are discussed.

Mechanical behavior of aluminum-bearing ferritic alloys for accident-tolerant fuel cladding applications

NASA Astrophysics Data System (ADS)

Guria, Ankan

Nuclear power currently provides about 13% of electrical power worldwide. Nuclear reactors generating this power traditionally use Zirconium (Zr) based alloys as the fuel cladding material. Exothermic reaction of Zr with steam under accident conditions may lead to production of hydrogen with the possibility of catastrophic consequences. Following the Fukushima-Daiichi incident, the exploration of accident-tolerant fuel cladding materials accelerated. Aluminum-rich (around 5 wt. %) ferritic steels such as Fecralloy, APMT(TM) and APM(TM) are considered as potential materials for accident-tolerant fuel cladding applications. These materials create an aluminum-based oxide scale protecting the alloy at elevated temperatures. Tensile deformation behavior of the above alloys was studied at different temperatures (25-500 °C) at a strain rate of 10-3 s-1 and correlated with microstructural characteristics. Higher strength and decent ductility of APMT(TM) led to further investigation of the alloy at various combination of strain rates and temperatures followed by fractography and detailed microscopic analyses. Serrations appeared in the stress-strain curves of APMT(TM) and Fecralloy steel tested in a limited temperature range (250-400 °C). The appearance of serrations is explained on the basis of dynamic strain aging (DSA) effect due to solute-dislocation interactions. The research in this study is being performed using the funds received from the US DOE Office of Nuclear Energy's Nuclear Energy University Programs (NEUP).

Effects of antiperspirant aluminum percent composition and mode of application on mock microcalcifications in mammography.

PubMed

Mesurolle, Benoît; Ceccarelli, Joan; Karp, Igor; Sun, Simon; El-Khoury, Mona

2014-02-01

Active ingredients in antiperspirants - namely, aluminum-based complexes - can produce radiopaque particles on mammography, mimicking microcalcifications. The present study was designed to investigate whether the appearance of antiperspirant induced radiopaque particles observed on mammograms is dependent on the percentage of aluminum-based complexes in antiperspirants and/or on their mode of application. A total of 43 antiperspirants with aluminum-based complex percentages ranging between 16% and 25% were tested. Each antiperspirant was applied to a single use plastic shield and then placed on an ultrasound gel pad, simulating breast tissue. Two experiments were performed, comparing antiperspirants based on (1) their percentage of aluminum-based complexes (20 antiperspirants) and (2) their mode of applications (solid, gel, and roll-on) (26 antiperspirants). Two experienced, blinded radiologists read images produced in consensus and assessed the appearance of radiopaque particles based on their density and shape. In experiment 1, there was no statistically significant association between the percent aluminum composition of invisible solid antiperspirants and the density or shape of the radiopaque particles (p-values>0.05). In experiment 2, there was a statistically significant association between the shape of the radiopaque particles and the mode of application of the antiperspirant (p-value=0.0015). Our study suggests that the mammographic appearance of the radiopaque antiperspirant particles is not related to their percent composition of aluminum complexes. However, their mode of application appears to influence the shape of radiopaque particles, solid antiperspirants mimicking microcalcifications the most and roll-on antiperspirants the least. Copyright © 2013. Published by Elsevier Ireland Ltd.

Metallic Thin-Film Bonding and Alloy Generation

NASA Technical Reports Server (NTRS)

Peotter, Brian S. (Inventor); Fryer, Jack Merrill (Inventor); Campbell, Geoff (Inventor); Droppers, Lloyd (Inventor)

2016-01-01

Diffusion bonding a stack of aluminum thin films is particularly challenging due to a stable aluminum oxide coating that rapidly forms on the aluminum thin films when they are exposed to atmosphere and the relatively low meting temperature of aluminum. By plating the individual aluminum thin films with a metal that does not rapidly form a stable oxide coating, the individual aluminum thin films may be readily diffusion bonded together using heat and pressure. The resulting diffusion bonded structure can be an alloy of choice through the use of a carefully selected base and plating metals. The aluminum thin films may also be etched with distinct patterns that form a microfluidic fluid flow path through the stack of aluminum thin films when diffusion bonded together.

Development of Ballistic Protection Based on Precipitation-Hardened Composite Material

NASA Astrophysics Data System (ADS)

Chernyshov, E. A.; Romanov, A. D.; Romanova, E. A.; Myl'nikov, V. V.

2018-03-01

The possibility of application of an aluminum-based precipitation-hardened composite material for purposes of ballistic protection is considered. Experimental data on A6 aluminum-based alloy reinforced with alumina particles are presented.

Innovative Processing of Composites for Ultra-High Temperature Applications. Book 2

DTIC Science & Technology

1993-11-01

with dispersed aluminum and nickel particles [6). Successful toughening has also been observed in titanium aluminide [7] and molybdenum disilicide [g,9...2) Nb-based aluminides with the major focus on NbAl3. I Research Summary To achieve the goal of this program, the present investigation has been...toughening to produce hybrid composites. I Niobium aluminid Matrix Composites Reactive hot compaction (RHC) has been successfully utilized to produce

76 FR 11502 - Notice of Vitamin D Standardization Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... Standardization Program SUMMARY: The Office of Dietary Supplements (ODS) of the National Institutes of Health (NIH... FURTHER INFORMATION CONTACT: Ms. Cindy Rooney, Office of Dietary Supplements, National Institutes of... Dietary Supplements, Office of the Director, National Institutes of Health. [FR Doc. 2011-4603 Filed 3-1...

Abbott Opinions #1-5.

ERIC Educational Resources Information Center

Education Law Center, Inc., Newark, NJ.

This document contains the following "Abbott Opinions": (1) "Early Childhood Education"; (2) "Adequate School Facilities"; (3) "Supplemental Programs and Whole School Reform in Elementary Schools"; (4) "Supplemental Programs in Middle and High Schools"; and (5) "Planning Programs and Budgets…

Deepest Spring in the Heart: KIDS COUNT Mississippi, 1996 Data Book. Volume III.

ERIC Educational Resources Information Center

Mississippi Kids Count, Jackson.

This data book for 1996 describes the condition of children in each of Mississippi's 82 counties, based on key indicators of child well-being. The first part of the report profiles child hunger in Mississippi, and discusses nutrition programs available to Mississippi's children, such as: the special Supplemental Food Program for Women, Infants and…

Does WIC Work? The Effects of WIC on Pregnancy and Birth Outcomes

ERIC Educational Resources Information Center

Bitler, Marianne P.; Currie, Janet

2005-01-01

Support for WIC, the Special Supplemental Nutrition Program for Women, Infants, and Children, is based on the belief that "WIC works." This consensus has lately been questioned by researchers who point out that most WIC research fails to properly control for selection into the program. This paper evaluates the selection problem using rich data…

Marketing, Information, and Parental Choice: A Comparative Case Study of Third-Party, Federally Funded Out-of-School-Time Services

ERIC Educational Resources Information Center

Stewart, Molly S.; Good, Annalee G.

2016-01-01

Information and promotional marketing play central but complex roles in market-based educational programs. This in-depth qualitative study examines these complexities using the case of Supplemental Educational Services, a parental choice program providing federally funded tutoring to low-income students in K-12 public schools. Examining the…

Upper-Division Transfer Students: Designing a Supplemental Instruction Program for Nursing Students within a Science Based Curriculum

ERIC Educational Resources Information Center

Clark, Karen M.; May, Isabell Cserno

2015-01-01

The transition to upper-level course work of transferring students, predominantly students from 2-year/community colleges, has been explored in recent education research literature. Yet, it has not been sufficiently explored whether and what academic support programs could be successful in supporting transfer students with the transfer process.…

Detecting selection effects in community implementations of family-based substance abuse prevention programs.

PubMed

Hill, Laura G; Goates, Scott G; Rosenman, Robert

2010-04-01

To calculate valid estimates of the costs and benefits of substance abuse prevention programs, selection effects must be identified and corrected. A supplemental comparison sample is typically used for this purpose, but in community-based program implementations, such a sample is often not available. We present an evaluation design and analytic approach that can be used in program evaluations of real-world implementations to identify selection effects, which in turn can help inform recruitment strategies, pinpoint possible selection influences on measured program outcomes, and refine estimates of program costs and benefits. We illustrate our approach with data from a multisite implementation of a popular substance abuse prevention program. Our results indicate that the program's participants differed significantly from the population at large.

New developments in aluminum for aircraft and automobiles

NASA Technical Reports Server (NTRS)

Petit, Jocelyn I.

1994-01-01

A common bond for the aircraft and automobile industry is the need for cost-efficient, lightweight structures such as provided by aluminum based materials. The topics are presented in viewgraph form and cover the following: new developments in aluminum for aircraft and automobiles; forces shaping future automotive materials needs; aluminum strength/weakness versus competitive materials; evolution of aluminum aerospace alloys; forces shaping future aircraft materials needs; fiber/metal structural laminates; and property requirements for jetliner and military transport applications.

Fabrication methods for YF-12 wing panels for the Supersonic Cruise Aircraft Research Program

NASA Technical Reports Server (NTRS)

Hoffman, E. L.; Payne, L.; Carter, A. L.

1975-01-01

Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Aircraft Research (SCAR) Program. With Lockheed-ADP as the prime contractor, full-scale structural panels are being designed and fabricated to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program involves ground testing and Mach 3 flight testing of full-scale structural panels and laboratory testing of representative structural element specimens. Fabrication methods and test results for weldbrazed and Rohrbond titanium panels are discussed. The fabrication methods being developed for boron/aluminum, Borsic/aluminum, and graphite/polyimide panels are also presented.

Grande Ronde Basin Supplementation Program; Lostine River, 2000 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onjukka, Sam T.; Harbeck, Jim

2003-03-01

The Northwest Power Planning Council (NPPC) identified supplementation as a high priority to achieve its goal of increasing runs of anadromous fish in the Columbia Basin. Supplementation activities in the Lostine River and associated monitoring and evaluation conducted by the Nez Perce Tribe relate directly to the needs addressed in the Columbia River Basin Fish and Wildlife Program (NPPC 1994). Measure 7.4L.1 of the Program mandates that appropriate research accompany any proposed supplementation. In addition, measure 7.3B.2 of the Program stresses the need for evaluating supplementation projects to assess their ability to increase production. Finally, Section 7.4D.3 encourages the studymore » of hatchery rearing and release strategies to improve survival and adaptation of cultured fish. In 1997, Oregon Department of Fisheries and Wildlife (ODFW) requested a modification of Permit 1011 to allow the take of adult spring chinook salmon. In 1998, the Nez Perce Tribe also requested a permit specific to activities on Lostine River. The permit was issued in 2000. A special condition in the permits required the development of a long term management plan for the spring chinook salmon of the Grande Ronde Basin. The Nez Perce Tribe, ODFW, and the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) completed a formal long range plan entitled ''Grande Ronde Basin Endemic Spring Chinook Salmon Supplementation Program''. The program proposes to increase the survival of spring chinook salmon in the Grand Ronde Basin through hatchery intervention. Adult salmon from the Lostine River, Catherine Creek, and the Upper Grande Ronde River are used for a conventional supplementation program in the basin. The Nez Perce program currently operates under the ESA Section 10 Permit 1149.« less

Grande Ronde Basin Supplementation Program; Lostine River, 2001 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onjukka, Sam T.; Harbeck, Jim

2003-03-01

The Northwest Power Planning Council (NPPC) identified supplementation as a high priority to achieve its goal of increasing runs of anadromous fish in the Columbia Basin. Supplementation activities in the Lostine River and associated monitoring and evaluation conducted by the Nez Perce Tribe relate directly to the needs addressed in the Columbia River Basin Fish and Wildlife Program (NPPC 1994). Measure 7.4L.1 of the Program mandates that appropriate research accompany any proposed supplementation. In addition, measure 7.3B.2 of the Program stresses the need for evaluating supplementation projects to assess their ability to increase production. Finally, Section 7.4D.3 encourages the studymore » of hatchery rearing and release strategies to improve survival and adaptation of cultured fish. In 1997, Oregon Department of Fisheries and Wildlife (ODFW) requested a modification of Permit 1011 to allow the take of adult spring chinook salmon. In 1998, the Nez Perce Tribe also requested a permit specific to activities on Lostine River. The permit was issued in 2000. A special condition in the permits required the development of a long term management plan for the spring chinook salmon of the Grande Ronde Basin. The Nez Perce Tribe, ODFW, and the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) completed a formal long range plan entitled ''Grande Ronde Basin Endemic Spring Chinook Salmon Supplementation Program''. The program proposes to increase the survival of spring chinook salmon in the Grand Ronde Basin through hatchery intervention. Adult salmon from the Lostine River, Catherine Creek, and the Upper Grande Ronde River are used for a conventional supplementation program in the basin. The Nez Perce program currently operates under the ESA Section 10 Permit 1149.« less

The Campus-Based Formula. NASFAA Task Force Report

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators, 2014

2014-01-01

The primary purpose of the National Association of Student Financial Aid Administrators (NASFAA) Campus-Based Aid Allocation Task Force was to examine the formula by which congressional appropriations for the Federal Supplemental Educational Opportunity Grant (FSEOG), Federal Work-Study (FWS), and Perkins Loan programs are distributed to schools,…

7 CFR 246.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... Agriculture shall carry out the Special Supplemental Nutrition Program for Women, Infants and Children (WIC Program). Section 17 of the Child Nutrition Act of 1966, as amended, states in part that the Congress...

7 CFR 246.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... Agriculture shall carry out the Special Supplemental Nutrition Program for Women, Infants and Children (WIC Program). Section 17 of the Child Nutrition Act of 1966, as amended, states in part that the Congress...

7 CFR 246.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... Agriculture shall carry out the Special Supplemental Nutrition Program for Women, Infants and Children (WIC Program). Section 17 of the Child Nutrition Act of 1966, as amended, states in part that the Congress...

7 CFR 246.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... Agriculture shall carry out the Special Supplemental Nutrition Program for Women, Infants and Children (WIC Program). Section 17 of the Child Nutrition Act of 1966, as amended, states in part that the Congress...

7 CFR 246.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL SUPPLEMENTAL NUTRITION PROGRAM FOR WOMEN, INFANTS AND CHILDREN... Agriculture shall carry out the Special Supplemental Nutrition Program for Women, Infants and Children (WIC Program). Section 17 of the Child Nutrition Act of 1966, as amended, states in part that the Congress...

SOLDERING OF ALUMINUM BASE METALS

DOEpatents

Erickson, G.F.

1958-02-25

This patent deals with the soldering of aluminum to metals of different types, such as copper, brass, and iron. This is accomplished by heating the aluminum metal to be soldered to slightly above 30 deg C, rubbing a small amount of metallic gallium into the part of the surface to be soldered, whereby an aluminum--gallium alloy forms on the surface, and then heating the aluminum piece to the melting point of lead--tin soft solder, applying lead--tin soft solder to this alloyed surface, and combining the aluminum with the other metal to which it is to be soldered.

FY 1993 report on aluminum-nitrate testing at the ETF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goodman, M.D.D.; Wise, M.D.

1993-09-30

This report summarizes the progress of the Aluminum Nitrate Nonhydrate (ANN) testing program at the F/H-Area Effluent Treatment Facility (ETF) for Fiscal Year 1993. Three tests were conducted in the months of February, April, and September. The tests yielded data that validated earlier conclusions that the addition of ANN to non-routine feed has a positive effect on the performance of ETF`s submicron filtration unit. Performance was observed to increase from 30--309%, depending on the season. The data also supports SRTC`s earlier conclusion that an optimal aluminum concentration exists in the range of 30--40 ppm, and concentrations above this range beginmore » to retard filtration performance. A rudimentary mathematical model that would predict Stage 1 flux was also developed during FY93. The model allowed for a more concise comparison of filter test runs, as well as increase the efficiency of the testing program by allowing shorter test runs to be conducted. It is postulated that the model can be further optimized to include aluminum concentration and time of year as independent variables that determine Stage 1 flux. Such a model should unequivocally prove the merits of pretreating ETF`s wastewater with aluminum nitrate. To proceed with the development of the model, further testing is proposed with stringent control of the aluminum concentration in the feed. In order to account for seasonal effects, one test should be conducted each month for Fiscal Year 1994. High Level Waste Engineering requests permission to conduct these test runs according to the following schedule: conduct tests in even numbered months beginning with October with routine influent as it is collected from normal process sewer influents and conduct tests in odd numbered months beginning with November with non-routine feed from H-Retention Basin.« less

Production of anhydrous aluminum chloride composition

DOEpatents

Vandergrift, G.F. III; Krumpelt, M.; Horwitz, E.P.

1981-10-08

A process is described for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

Production of anhydrous aluminum chloride composition and process for electrolysis thereof

DOEpatents

Vandegrift, George F.; Krumpelt, Michael; Horwitz, E. Philip

1983-01-01

A process for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

Final Test Report: Hexavalent Chrome Free Coatings for Electronics Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2016-01-01

The test results for Salt Spray Resistance, Static Heat and Humidity and Marine Environment can be found in Sections 3.1.3.3, 3.1.4.3 and 3.1.5.3 respectively. In summary, both the Metalast TCP and SurTec 650 Type 2 conversion coatings perform very similar to the incumbent Type 1 conversion coating against both 6061 and 5052 aluminum under all three test conditions. Significant prior work was performed to select the aluminum and conversion coating included within this test cycle; Reference - NASA GSDO Program Hexavalent Chrome Alternatives Final Pretreatments Test Report Task Order: NNH12AA45D September 01, 2013. As illustrated in the data, the 6061 aluminum panels SLIGHTLY out-performed the 5052 aluminum panels. Individual shielding effectiveness graphs for each panel are included within Appendix C and D. One other notable effect found during review of the data is that the Test Panels exposed to B117 Salt Fog reduced in shielding effectiveness significantly more than the Marine Environment Test Panels. The shielding effectiveness of the Marine Test Panels was approximately 20dB higher than the Test Panels that underwent B117 Salt Fog Exposure. The intent of this evaluation was not to maximize shielding effectiveness values. The same Parker Chomerics Cho-Seal 6503 gasket material was used for all panels with aluminum and conversion coating variants. A typical EMI gasket design for corrosive environments would be done quite differently. The intent was to execute a test that would provide the best possible evaluation of different aluminum materials and conversion coatings in corrosive environments. The test program achieved this intent. The fact that the two aluminums and two Type II conversion coatings performed similar to the incumbent Type 1 conversion coating is a positive outcome. It was desired to have an outcome that further differentiation the performance of two aluminum types and two conversion coating types but this could not be extracted by the test results. Further analysis of the test plates may be done by X-Ray Photoelectron Spectroscopy (XPS) or Electrochemical Impedance Spectroscopy (EIS). Feasibility of this is under review.

Method for improving the oxidation-resistance of metal substrates coated with thermal barrier coatings

DOEpatents

Thompson, Anthony Mark; Gray, Dennis Michael; Jackson, Melvin Robert

2002-01-01

A method for providing a protective coating on a metal-based substrate is disclosed. The method involves the application of an aluminum-rich mixture to the substrate to form a discontinuous layer of aluminum-rich particles, followed by the application of a second coating over the discontinuous layer of aluminum-rich particles. Aluminum diffuses from the aluminum-rich layer into the substrate, and into any bond coat layer which is subsequently applied. Related articles are also described.

Carbide coated fibers in graphite-aluminum composites

NASA Technical Reports Server (NTRS)

Imprescia, R. J.; Levinson, L. S.; Reiswig, R. D.; Wallace, T. C.; Williams, J. M.

1975-01-01

The NASA-supported program at the Los Alamos Scientific Laboratory (LASL) to develop carbon fiber-aluminum matrix composites is described. Chemical vapor deposition (CVD) was used to uniformly deposit thin, smooth, continuous coats of TiC on the fibers of graphite tows. Wet chemical coating of fibers, followed by high-temperature treatment, was also used, but showed little promise as an alternative coating method. Strength measurements on CVD coated fiber tows showed that thin carbide coats can add to fiber strength. The ability of aluminum alloys to wet TiC was successfully demonstrated using TiC-coated graphite surfaces. Pressure-infiltration of TiC- and ZrC-coated fiber tows with aluminum alloys was only partially successful. Experiments were performed to evaluate the effectiveness of carbide coats on carbon as barriers to prevent reaction between alluminum alloys and carbon. Initial results indicate that composites of aluminum and carbide-coated graphite are stable for long periods of time at temperatures near the alloy solidus.

The Supplemental Nutrition Assistance Program

PubMed Central

Pomeranz, Jennifer L.; Chriqui, Jamie F.

2015-01-01

Under the current version of the Supplemental Nutrition Assistance Program (SNAP), participants can purchase virtually any food or beverage (collectively, food). Research indicates that SNAP recipients may have worse dietary quality than income-eligible nonparticipants. Policymakers have urged the U.S. Department of Agriculture (USDA) to pilot SNAP purchasing restrictions intended to support a healthier diet, and state legislators have proposed similar bills. The USDA rejected these invitations, stating that it would be administratively and logistically difficult to differentiate among products, amid other concerns. However, the USDA’s Dietary Guidelines for Americans and the Supplemental Nutrition Program for Women, Infants, and Children (WIC) do just that. Further, state governments define and differentiate among foods and beverages for tax purposes. This paper reviews several factors intended to inform future policy decisions: the science indicating that SNAP recipients have poorer diet quality than income-eligible nonparticipants; the public’s support for revising the SNAP program; federal, state, and city legislators’ formal proposals to amend SNAP based on nutrition criteria and the USDA’s public position in opposition to these proposals; state bills to amend eligible foods purchasable with SNAP benefits; state retail food tax laws; and the retail administration and program requirements for both WIC and SNAP. The paper finds that the government has a clear ability to align SNAP benefits with nutrition science and operationalize this into law. PMID:26091926

Development Program for Field-Repairable/Expendable Main Rotor Blades

DTIC Science & Technology

1976-09-01

honeycomb aft 2, and it represents the most cost- core, and extruded aluminum alloy effective approach to a repairable trailing-edge spline (Reference...materials lend themselves to relatively inexpensive fabrication techniques, the questionable torsional stiffness of composite spars eliminated them...values of the fatigue strength of aluminum , the spline and aft doublers are predicted to have a negative margin of safety for infinite life. The

Evaluation of bonded boron/epoxy doublers for commercial aircraft aluminum structures

NASA Technical Reports Server (NTRS)

Belason, Bruce; Rutherford, Paul; Miller, Matthew; Raj, Shreeram

1994-01-01

An 18 month laboratory test and stress analysis program was conducted to evaluate bonded boron/epoxy doublers for repairing cracks on aluminum aircraft structures. The objective was to obtain a core body of substantiating data which will support approval for use on commercial transports of a technology that is being widely used by the military. The data showed that the doublers had excellent performance.

77 FR 11367 - Defense Federal Acquisition Regulation Supplement; Extension of the Test Program for Negotiation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... Federal Acquisition Regulation Supplement; Extension of the Test Program for Negotiation of Comprehensive... Program for Negotiation of Comprehensive Small Business Subcontracting Plans. DATES: Effective Date... Fiscal Year 2012, (Pub. L. 112-81). Section 866 amends the DoD Test Program for Negotiation of...

42 CFR 417.106 - Quality assurance program; Availability, accessibility, and continuity of basic and supplemental...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Qualified Health Maintenance Organizations: Services § 417.106 Quality assurance program; Availability, accessibility, and continuity of basic and supplemental health services. (a) Quality assurance program. Each HMO or CMP must have an ongoing quality assurance program for its health services that meets the...

78 FR 46799 - Supplemental Nutrition Assistance Program: Privacy Protections of Information From Applicant...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... Supplemental Nutrition Assistance Program: Privacy Protections of Information From Applicant Households AGENCY... National School Lunch Program established under the Richard B. Russell National School Lunch Act or the School Breakfast Program established under the Child Nutrition Act of 1966, in order to directly certify...

Friction-Stir Welding of Aluminum For the Space Program

NASA Technical Reports Server (NTRS)

Jones, Clyde S.; Smelser, Jerry W. (Technical Monitor)

2002-01-01

The Marshall Space Flight Center is developing and characterizing the friction stir welding process for the Space Shuttle and other space programs. This revolutionary process, invented and patented by The Weld Institute in England, offers tremendous advantages for joining aluminum for high performance applications. It is particularly suited for advanced aluminum-lithium alloys, such as 2195, the primary structural alloy used in the External Tank. The friction stir welding process joins metals with minimal heat input, resulting in high-strength joints with high ductility. It is a simple process to demonstrate using a common milling machine for sample parts, but relatively expensive to implement on large-scale hardware, due to the high cost of tooling needed to handle the high forging pressures characteristic of the process. Recent developments at the Marshall Space Flight Center have demonstrated friction stir welding on linear joints up to 5 meters (15 ft.), with material thickness ranging between 2.5 mm and 16.5 mm (0.100" to 0.650"). High efficiency weld joints have been produced in aluminum from the 2000, 5000, and 6000 series alloy systems. A "retractable pin tool" system was patented by MSFC that allows use of friction stir welding for joints with changing material thickness, and with less rigid tooling than previously considered. This presentation will describe the details of alloys welded to-date and technical advances under development at MSFC. These developments could have substantial benefit to industrial applications for welding aluminum.

Process Simulation of Gas Metal Arc Welding Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, Paul E.

2005-09-06

ARCWELDER is a Windows-based application that simulates gas metal arc welding (GMAW) of steel and aluminum. The software simulates the welding process in an accurate and efficient manner, provides menu items for process parameter selection, and includes a graphical user interface with the option to animate the process. The user enters the base and electrode material, open circuit voltage, wire diameter, wire feed speed, welding speed, and standoff distance. The program computes the size and shape of a square-groove or V-groove weld in the flat position. The program also computes the current, arc voltage, arc length, electrode extension, transfer ofmore » droplets, heat input, filler metal deposition, base metal dilution, and centerline cooling rate, in English or SI units. The simulation may be used to select welding parameters that lead to desired operation conditions.« less

77 FR 65439 - 30-Day Notice of Proposed Information Collection: Supplemental Registration for the Diversity...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

...: Supplemental Registration for the Diversity Immigrant Visa Program ACTION: Notice of request for public comment... for the Diversity Immigrant Visa Program. OMB Control Number: 1405-0098. Type of Request: Extension... applicants an Instruction Package for Immigrant Visa Applicants, which consists of Form DS-122 (Supplemental...

Programming and machining of complex parts based on CATIA solid modeling

NASA Astrophysics Data System (ADS)

Zhu, Xiurong

2017-09-01

The complex parts of the use of CATIA solid modeling programming and simulation processing design, elaborated in the field of CNC machining, programming and the importance of processing technology. In parts of the design process, first make a deep analysis on the principle, and then the size of the design, the size of each chain, connected to each other. After the use of backstepping and a variety of methods to calculate the final size of the parts. In the selection of parts materials, careful study, repeated testing, the final choice of 6061 aluminum alloy. According to the actual situation of the processing site, it is necessary to make a comprehensive consideration of various factors in the machining process. The simulation process should be based on the actual processing, not only pay attention to shape. It can be used as reference for machining.

Development and characterization of Powder Metallurgy (PM) 2XXX series Al alloy products and Metal Matrix Composite (MMC) 2XXX Al/SiC materials for high temperature aircraft structural applications

NASA Technical Reports Server (NTRS)

Chellman, D. J.; Gurganus, T. B.; Walker, J. A.

1992-01-01

The results of a series of material studies performed by the Lockheed Aeronautical Systems Company over the time period from 1980 to 1991 are discussed. The technical objective of these evaluations was to develop and characterize advanced aluminum alloy materials with temperature capabilities extending to 350 F. An overview is given of the first five alloy development efforts under this contract. Prior work conducted during the first five modifications of the alloy development program are listed. Recent developments based on the addition of high Zr levels to an optimum Al-Cu-Mg alloy composition by powder metallurgy processing are discussed. Both reinforced and SiC or B4C ceramic reinforced alloys were explored to achieve specific target goals for high temperature aluminum alloy applications.

SPITFIRE-1

NASA Technical Reports Server (NTRS)

Ryntz, Edward F.

1995-01-01

The purpose of this effort is to develop low-cost rapid forming superplastic aluminum that will be evaluated in pilot production trials for automotive SPF components. The alloy development study conducted under SPITFIRE-1 showed that the addition of CU or Mn to the base 5083 aluminum alloy refined the grain size, leading to enhanced superplastic properties. In SPITFIRE-2, these alloy variants will be further refined and studied to meet the target properties established earlier in the program. Mechanical properties, component forming and post-forming properties will be evaluated. Also, the alloy production process, including thermomechanical processing (TMP) optimization to reduce production cost, will be investigated during SPITFIRE-2. After identifying preferred compositions and production processing, the most promising alloy will be manufactured into production coils for verification during SPITFIRE-3. Components will be produced from these coils in SPITFIRE-4, and the process and component performance will be assessed.

Strengthening Aluminum Alloys for High Temperature Applications Using Nanoparticles of Al203 and Al3-X Compounds (X= Ti, V, Zr)

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2007-01-01

In this paper the effect of nanoparticles A12O3 and A13-X compounds (X= Ti, V, Zr) on the improvement of mechanical properties of aluminum alloys for elevated temperature applications is presented. These nanoparticles were selected based on their chemical stability and low diffusions rates in aluminum matrix at high temperatures. The strengthening mechanism for aluminum alloy is based on the mechanical blocking of dislocation movements by these nanoparticles. Samples were prepared from A12O3 nanoparticle preforms, which were produced using ceramic injection molding process and pressure infiltrated by molten aluminum. A12O3 nanoparticles can also be homogeneously mixed with aluminum powder and consolidated into samples through hot pressing and sintering. On the other hand, the Al3-X nanoparticles are produced as precipitates via in situ reactions with molten aluminum alloys using conventional casting techniques. The degree of alloy strengthening using nanoparticles will depend on the materials, particle size, shape, volume fraction, and mean inter-particle spacing.

Spontaneous diffusion of an effective skin cancer prevention program through Web-based access to program materials.

PubMed

Hall, Dawn M; Escoffery, Cam; Nehl, Eric; Glanz, Karen

2010-11-01

Little information exists about the diffusion of evidence-based interventions, a process that can occur naturally in organized networks with established communication channels. This article describes the diffusion of an effective skin cancer prevention program called Pool Cool through available Web-based program materials. We used self-administered surveys to collect information from program users about access to and use of Web-based program materials. We analyzed the content of e-mails sent to the official Pool Cool Web site to obtain qualitative information about spontaneous diffusion. Program users were dispersed throughout the United States, most often learning about the program through a Web site (32%), publication (26%), or colleague (19%). Most respondents (86%) reported that their pool provided educational activities at swimming lessons. The Leader's Guide (59%) and lesson cards (50%) were the most commonly downloaded materials, and most respondents reported using these core items sometimes, often, or always. Aluminum sun-safety signs were the least frequently used materials. A limited budget was the most commonly noted obstacle to sun-safety efforts at the pool (85%). Factors supporting sun safety at the pool centered around risk management (85%) and health of the pool staff (78%). Diffusion promotes the use of evidence-based health programs and can occur with and without systematic efforts. Strategies such as providing well-packaged, user-friendly program materials at low or no cost and strategic advertisement of the availability of program materials may increase program use and exposure. Furthermore, highlighting the benefits of the program can motivate potential program users.

Household food insecurity is inversely associated with social capital and health in females from special supplemental nutrition program for women, infants, and children households in Appalachian Ohio.

PubMed

Walker, Jennifer L; Holben, David H; Kropf, Mary L; Holcomb, John P; Anderson, Heidi

2007-11-01

Food insecurity has been negatively associated with social capital (a measure of perceived social trust and community reciprocity) and health status. Yet, these factors have not been studied extensively among women from households participating in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) or the WIC Farmers' Market Nutrition Program. A cross-sectional, self-administered, mailed survey was conducted in Athens County, Ohio, to examine the household food security status, social capital, and self-rated health status of women from households receiving WIC benefits alone (n=170) and those from households receiving both WIC and Farmers' Market Nutrition Program benefits (n=65), as well as the relationship of food security, social capital, and self-rated health status. Household food security and perceived health status were not significantly different between groups; however, high social capital was greater (chi(2)=8.156, P=0.004) among WIC, compared to WIC/Farmers' Market Nutrition Program group respondents. Overall, household food insecurity was inversely associated with perceived health status (r=-0.229, P=0.001) and social capital (r=0.337, P<0.001). Enabling networking among clients, leading to client-facilitated programs and projects, and developing programs that strengthen social capital, including community-based mentoring programs and nutrition education programs that are linked to community-based activities, are needed, as is additional research to verify these findings.

The Supplemental Nutrition Assistance Program: Analysis of Program Administration and Food Law Definitions.

PubMed

Pomeranz, Jennifer L; Chriqui, Jamie F

2015-09-01

Under the current version of the Supplemental Nutrition Assistance Program (SNAP), participants can purchase virtually any food or beverage (collectively, food). Research indicates that SNAP recipients may have worse dietary quality than income-eligible nonparticipants. Policymakers have urged the U.S. Department of Agriculture (USDA) to pilot SNAP purchasing restrictions intended to support a healthier diet, and state legislators have proposed similar bills. The USDA rejected these invitations, stating that it would be administratively and logistically difficult to differentiate among products, amid other concerns. However, the USDA's Dietary Guidelines for Americans and the Supplemental Nutrition Program for Women, Infants, and Children (WIC) do just that. Further, state governments define and differentiate among foods and beverages for tax purposes. This paper reviews several factors intended to inform future policy decisions: the science indicating that SNAP recipients have poorer diet quality than income-eligible nonparticipants; the public's support for revising the SNAP program; federal, state, and city legislators' formal proposals to amend SNAP based on nutrition criteria and the USDA's public position in opposition to these proposals; state bills to amend eligible foods purchasable with SNAP benefits; state retail food tax laws; and the retail administration and program requirements for both WIC and SNAP. The paper finds that the government has a clear ability to align SNAP benefits with nutrition science and operationalize this into law. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Cryogenically cooled detector pin mount

DOEpatents

Hunt, Jr., William E; Chrisp, Michael P

2014-06-03

A focal plane assembly facilitates a molybdenum base plate being mounted to another plate made from aluminum. The molybdenum pin is an interference fit (press fit) in the aluminum base plate. An annular cut out area in the base plate forms two annular flexures.

Cast Aluminum Alloys for High Temperature Applications Using Nanoparticles Al2O3 and Al3-X Compounds (X = Ti, V, Zr)

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2009-01-01

In this paper, the effect of nanoparticles Al2O3 and Al3-X compounds (X = Ti, V, Zr) on the improvement of mechanical properties of aluminum alloys for elevated temperature applications is presented. These nanoparticles were selected based on their low cost, chemical stability and low diffusions rates in aluminum at high temperatures. The strengthening mechanism at high temperature for aluminum alloy is based on the mechanical blocking of dislocation movements by these nanoparticles. For Al2O3 nanoparticles, the test samples were prepared from special Al2O3 preforms, which were produced using ceramic injection molding process and then pressure infiltrated by molten aluminum. In another method, Al2O3 nanoparticles can also be homogeneously mixed with fine aluminum powder and consolidated into test samples through hot pressing and sintering. With the Al3-X nanoparticles, the test samples are produced as precipitates from in-situ reactions with molten aluminum using conventional permanent mold or die casting techniques. It is found that cast aluminum alloy using nanoparticles Al3-X is the most cost effective method to produce high strength aluminum alloys for high temperature applications in comparison to nanoparticles Al2O3. Furthermore, significant mechanical properties retention in high temperature environment could be achieved with Al3-X nanoparticles, resulting in tensile strength of nearly 3 times higher than most 300- series conventional cast aluminum alloys tested at 600 F.

Modeling of Water-Breathing Propulsion Systems Utilizing the Aluminum-Seawater Reaction and Solid-Oxide Fuel Cells

DTIC Science & Technology

2011-01-01

ABSTRACT Title of Document: MODELING OF WATER-BREATHING PROPULSION SYSTEMS UTILIZING THE ALUMINUM-SEAWATER REACTION AND SOLID...Hybrid Aluminum Combustor (HAC): a novel underwater power system based on the exothermic reaction of aluminum with seawater. The system is modeled ...using a NASA-developed framework called Numerical Propulsion System Simulation (NPSS) by assembling thermodynamic models developed for each component

Aluminum Mirror Coatings for UVOIR Telescope Optics Including the Far UV

NASA Technical Reports Server (NTRS)

Balasubramanian, Kunjithapatha; Hennessy, John; Raouf, Nasrat; Nikzad, Shouleh; Ayala, Michael; Shaklan, Stuart; Scowen, Paul; Del Hoyo, Javier; Quijada, Manuel

2015-01-01

NASA Cosmic Origins (COR) Program identified the development of high reflectivity mirror coatings for large astronomical telescopes particularly for the far ultra violet (FUV) part of the spectrum as a key technology requiring significant materials research and process development. In this paper we describe the challenges and accomplishments in producing stable high reflectance aluminum mirror coatings with conventional evaporation and advanced Atomic Layer Deposition (ALD) techniques. We present the current status of process development with reflectance of approx. 55 to 80% in the FUV achieved with little or no degradation over a year. Keywords: Large telescope optics, Aluminum mirror, far UV astrophysics, ALD, coating technology development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Randolph, B.

Composite liners have been fabricated for the Los Alamos liner driven HEDP experiments using impactors formed by physical vapor deposition (PVD), electroplating, machining and shrink fitting. Chemical vapor deposition (CVD) has been proposed for some ATLAS liner applications. This paper describes the processes used to fabricate machined and shrink fitted impactors which have been used for copper impactors in 1100 aluminum liners and 6061 T-6 aluminum impactors in 1100 aluminum liners. The most successful processes have been largely empirically developed and rely upon a combination of shrink fitted and light press fitting. The processes used to date will be describedmore » along with some considerations for future composite liners requirements in the HEDP Program.« less

Fabrication of aluminum-carbon composites

NASA Technical Reports Server (NTRS)

Novak, R. C.

1973-01-01

A screening, optimization, and evaluation program is reported of unidirectional carbon-aluminum composites. During the screening phase both large diameter monofilament and small diameter multifilament reinforcements were utilized to determine optimum precursor tape making and consolidation techniques. Difficulty was encountered in impregnating and consolidating the multifiber reinforcements. Large diameter monofilament reinforcement was found easier to fabricate into composites and was selected to carry into the optimization phase in which the hot pressing parameters were refined and the size of the fabricated panels was scaled up. After process optimization the mechanical properties of the carbon-aluminum composites were characterized in tension, stress-rupture and creep, mechanical fatigue, thermal fatigue, thermal aging, thermal expansion, and impact.

Aligning and Elevating University-Based Low-Income Nutrition Education through the Land-Grant University Cooperative Extension System. National Report

ERIC Educational Resources Information Center

Schneider, Connie

2014-01-01

The nation's Land-Grant University Cooperative Extension System (LGU-CES) is committed to ensuring that low-income populations have a safe, affordable, and healthy food supply. Two low-income nutrition education programs that are core to this commitment are the Expanded Food and Nutrition Education Program (EFNEP) and the Supplemental Nutrition…

Assessing the Impact of a Multi-Disciplinary Peer-Led-Team Learning Program on Undergraduate STEM Education

ERIC Educational Resources Information Center

Carlson, Kerri; Celotta, Dayius Turvold; Curran, Erin; Marcus, Mithra; Loe, Melissa

2016-01-01

There has been a national call to transition away from the traditional, passive, lecture-based model of STEM education towards one that facilitates learning through active engagement and problem solving. This mixed-methods research study examines the impact of a supplemental Peer-Led Team Learning (PLTL) program on knowledge and skill acquisition…

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process

PubMed Central

Ahmad, Azlan; Lajis, Mohd Amri

2017-01-01

Solid-state recycling, which involves the direct recycling of scrap metal into bulk material using severe plastic deformation, has emerged as a potential alternative to the conventional remelting and recycling techniques. Hot press forging has been identified as a sustainable direct recycling technique that has fewer steps and maintains excellent material performance. An experimental investigation was conducted to explore the hardness and density of a recycled aluminum-based metal matrix composite by varying operating temperature and holding time. A mixture of recycled aluminum, AA6061, and aluminum oxide were simultaneously heated to 430, 480, and 530 °C and forged for 60, 90, and 120 min. We found a positive increase in microhardness and density for all composites. The hardness increased approximately 33.85%, while density improved by about 15.25% whenever the temperature or the holding time were increased. Based on qualitative analysis, the composite endures substantial plastic deformation due to the presence of hardness properties due to the aluminum oxide embedded in the aluminum matrix. These increases were significantly affected by the operating temperature; the holding time also had a subordinate role in enhancing the metal matrix composite properties. Furthermore, in an effort to curb the shortage of primary resources, this study reviewed the promising performance of secondary resources produced by using recycled aluminum and aluminum oxide as the base matrix and reinforcement constituent, respectively. This study is an outline for machining practitioners and the manufacturing industry to help increase industry sustainability with the aim of preserving the Earth for our community in the future. PMID:28925963

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process.

PubMed

Ahmad, Azlan; Lajis, Mohd Amri; Yusuf, Nur Kamilah

2017-09-19

Solid-state recycling, which involves the direct recycling of scrap metal into bulk material using severe plastic deformation, has emerged as a potential alternative to the conventional remelting and recycling techniques. Hot press forging has been identified as a sustainable direct recycling technique that has fewer steps and maintains excellent material performance. An experimental investigation was conducted to explore the hardness and density of a recycled aluminum-based metal matrix composite by varying operating temperature and holding time. A mixture of recycled aluminum, AA6061, and aluminum oxide were simultaneously heated to 430, 480, and 530 °C and forged for 60, 90, and 120 min. We found a positive increase in microhardness and density for all composites. The hardness increased approximately 33.85%, while density improved by about 15.25% whenever the temperature or the holding time were increased. Based on qualitative analysis, the composite endures substantial plastic deformation due to the presence of hardness properties due to the aluminum oxide embedded in the aluminum matrix. These increases were significantly affected by the operating temperature; the holding time also had a subordinate role in enhancing the metal matrix composite properties. Furthermore, in an effort to curb the shortage of primary resources, this study reviewed the promising performance of secondary resources produced by using recycled aluminum and aluminum oxide as the base matrix and reinforcement constituent, respectively. This study is an outline for machining practitioners and the manufacturing industry to help increase industry sustainability with the aim of preserving the Earth for our community in the future.

Liquid oxygen/metal gelled monopropellants

NASA Technical Reports Server (NTRS)

Wickman, John H.

1991-01-01

The objectives of this program were to establish the feasibility of metallized/liquid oxygen monopropellants and select the best monopropellant formulation for continued study. The metal powders mixed with the liquid oxygen were aluminum/magnesium (80/20), silicon and iron (Iron was only tested for burning properties). The formulations were first evaluated on whether they detonated when ignited or burned. The formulations only burned when ignited. The viscosity for the formulations ranged from 900 cps to 100 cps at shear rates up to 300 seconds(sup -1). Two percent (by weight) of Cab-O-Sil was added to the aluminum and aluminum/magnesium formulations for gelling while the silicon formulation used three percent. Within a seven hour period, settling was suggested only in the 29 percent aluminum and 29 percent aluminum/magnesium formulations. The monopropellants were burned in a cylinder submerged in a liquid nitrogen bath. Experimental data at ambient pressure indicated that the monopropellants were extinguished when the flame front reached regions submerged under the liquid nitrogen. The burn rate increased dramatically when burned in a cylinder enclosure with less heat sink available to the monopropellant. The test results were inconclusive as to whether the increased burn rate was due to the lower heat sink capacity or the small amount of pressure (2 psi) generated during the burning of the monopropellant. The burning of the aluminum and aluminum/magnesium resulted in a brilliant white flame similar to that of an arc welder. These monopropellants burned in a pulsating manner with the aluminum/magnesium appearing to have less pulsating combustion. The silicon monopropellant burned with an orange glow. No sparks or energetic burning was apparent as with the aluminum or aluminum/magnesium.

Use of Dietary Supplements Improved Diet Quality But Not Cardiovascular and Nutritional Biomarkers in Socioeconomically Diverse African American and White Adults.

PubMed

Kuczmarski, Marie Fanelli; Beydoun, May A; Stave Shupe, Emily; Pohlig, Ryan T; Zonderman, Alan B; Evans, Michele K

2017-01-01

Knowledge of the contribution of supplements to overall nutritional health is limited. The research objectives were to describe motivations for use of dietary supplements by African Americans and Whites examined in the Healthy Aging in Neighborhoods of Diversity across the Life Span (HANDLS) study and to determine if supplements provided beneficial effects to micronutrient diet quality and nutritional and cardiovascular biomarkers. The majority of the HANDLS study population were smokers, overweight or obese, and self-reported their health as poor to good. The top two reasons for their supplement use were to supplement the diet and to improve overall health. Micronutrient intake was calculated from two 24-hour recalls and a supplement questionnaire. Diet quality was assessed by the Mean Adequacy Ratio (MAR) [Maximum score = 100] derived from the Nutrient Adequacy Ratio (NAR) for 17 micronutrients. The MAR score for nonusers was 73.12, for supplement users based on diet alone was 74.89, and for food and supplements was 86.61. Dietary supplements significantly increased each NAR score and MAR score. However, there were no significant differences between the population proportions with inadequate or excessive blood levels for any biomarkers examined. Nutrition education programs and intervention strategies addressing dietary supplement intake might lead to healthier food choices and may improve the health of this population.

Use of Dietary Supplements Improved Diet Quality But Not Cardiovascular and Nutritional Biomarkers in Socioeconomically Diverse African American and White Adults

PubMed Central

Kuczmarski, Marie Fanelli; Beydoun, May A.; Shupe, Emily Stave; Pohlig, Ryan T.; Zonderman, Alan B.; Evans, Michele K.

2017-01-01

Knowledge of the contribution of supplements to overall nutritional health is limited. The research objectives were to describe motivations for use of dietary supplements by African Americans and Whites examined in the Healthy Aging in Neighborhoods of Diversity across the Life Span (HANDLS) study and to determine if supplements provided beneficial effects to micronutrient diet quality and nutritional and cardiovascular biomarkers. The majority of the HANDLS study population were smokers, overweight or obese, and self-reported their health as poor to good. The top two reasons for their supplement use were to supplement the diet and to improve overall health. Micronutrient intake was calculated from two 24-hour recalls and a supplement questionnaire. Diet quality was assessed by the Mean Adequacy Ratio (MAR) [Maximum score = 100] derived from the Nutrient Adequacy Ratio (NAR) for 17 micronutrients. The MAR score for nonusers was 73.12, for supplement users based on diet alone was 74.89, and for food and supplements was 86.61. Dietary supplements significantly increased each NAR score and MAR score. However, there were no significant differences between the population proportions with inadequate or excessive blood levels for any biomarkers examined. Nutrition education programs and intervention strategies addressing dietary supplement intake might lead to healthier food choices and may improve the health of this population. PMID:28339339

A Fundamental Study of Laser Beam Welding Aluminum-Lithium Alloy 2195 for Cryogenic Tank Applications

NASA Technical Reports Server (NTRS)

Martukanitz, R. P.; Jan. R.

1996-01-01

Based on the potential for decreasing costs of joining stiffeners to skin by laser beam welding, a fundamental research program was conducted to address the impediments identified during an initial study involving laser beam welding of aluminum-lithium alloys. Initial objectives of the program were the identification of governing mechanism responsible for process related porosity while establishing a multivariant relationship between process parameters and fusion zone geometry for laser beam welds of alloy 2195. A three-level fractional factorial experiment was conducted to establish quantitative relationships between primary laser beam processing parameters and critical weld attributes. Although process consistency appeared high for welds produced during partial completion of this study, numerous cracks on the top-surface of the welds were discovered during visual inspection and necessitated additional investigations concerning weld cracking. Two experiments were conducted to assess the effect of filler alloy additions on crack sensitivity: the first experiment was used to ascertain the effects of various filler alloys on cracking and the second experiment involved modification to process parameters for increasing filler metal dilution. Results indicated that filler alloys 4047 and 4145 showed promise for eliminating cracking.

Robotic Variable Polarity Plasma Arc (VPPA) Welding

NASA Technical Reports Server (NTRS)

Jaffery, Waris S.

1993-01-01

The need for automated plasma welding was identified in the early stages of the Space Station Freedom Program (SSFP) because it requires approximately 1.3 miles of welding for assembly. As a result of the Variable Polarity Plasma Arc Welding (VPPAW) process's ability to make virtually defect-free welds in aluminum, it was chosen to fulfill the welding needs. Space Station Freedom will be constructed of 2219 aluminum utilizing the computer controlled VPPAW process. The 'Node Radial Docking Port', with it's saddle shaped weld path, has a constantly changing surface angle over 360 deg of the 282 inch weld. The automated robotic VPPAW process requires eight-axes of motion (six-axes of robot and two-axes of positioner movement). The robot control system is programmed to maintain Torch Center Point (TCP) orientation perpendicular to the part while the part positioner is tilted and rotated to maintain the vertical up orientation as required by the VPPAW process. The combined speed of the robot and the positioner are integrated to maintain a constant speed between the part and the torch. A laser-based vision sensor system has also been integrated to track the seam and map the surface of the profile during welding.

Robotic Variable Polarity Plasma Arc (VPPA) welding

NASA Astrophysics Data System (ADS)

Jaffery, Waris S.

1993-02-01

The need for automated plasma welding was identified in the early stages of the Space Station Freedom Program (SSFP) because it requires approximately 1.3 miles of welding for assembly. As a result of the Variable Polarity Plasma Arc Welding (VPPAW) process's ability to make virtually defect-free welds in aluminum, it was chosen to fulfill the welding needs. Space Station Freedom will be constructed of 2219 aluminum utilizing the computer controlled VPPAW process. The 'Node Radial Docking Port', with it's saddle shaped weld path, has a constantly changing surface angle over 360 deg of the 282 inch weld. The automated robotic VPPAW process requires eight-axes of motion (six-axes of robot and two-axes of positioner movement). The robot control system is programmed to maintain Torch Center Point (TCP) orientation perpendicular to the part while the part positioner is tilted and rotated to maintain the vertical up orientation as required by the VPPAW process. The combined speed of the robot and the positioner are integrated to maintain a constant speed between the part and the torch. A laser-based vision sensor system has also been integrated to track the seam and map the surface of the profile during welding.

Instituting a standards-based K--12 science curriculum supplement program at the National Institutes of Health: A case study

NASA Astrophysics Data System (ADS)

Witherly, Jeffre

Research on student achievement indicates the U.S. K-12 education system is not adequately preparing American students to compete in the 21st century global economy in the areas of science and mathematics. Congress has asked the scientific entities of the federal government to help increase K-12 science learning by creating standards-based learning tools for science classrooms as part of a "voluntary curriculum." One problem facing federal entities, such as the National Institutes of Health (NIH), is the need to create science-learning tools that conform to the National Science Education Standards (NSES) for curriculum materials and, therefore, are standards-based and applicable to the K-12 curriculum. This case study sought to better understand the change process at one federal agency as it went from producing K-12 learning tools that were educational in nature to a program that produced K-12 standards-based learning tools: the NIH Science Curriculum Supplement Program (NIH SCSP). The NIH SCSP was studied to gain insight into how this change in educational approach occurred, what factors enabled or inhibited the change process, and what the long-term benefits of the NIH SCSP are to the NIH. Kurt Lewin's three-step theory of change guided data gathering and data analysis. Semi-structured interviews and programmatic document review served as the major data gathering sources. Details describing the process of organizational change at the NIH were revealed during analysis of these data following the coding of interview transcripts and written record documents. The study found the process of change at the NIH proceeded in a manner generally predicted by the Lewinian change model. Enablers to the change were cost-sharing with individual institutes, support of senior leadership, and crediting the role of individual institutes prominently in each supplement. The cost of creating a supplement was reported as the single inhibitor to the program. This case study yielded a detailed description of the process of change at this federal institution that may offer valuable insights to similar federal organizations confronting educational change. The study may also contribute to the existing body of knowledge regarding the process of organizational change in a federal setting.

Oxaliplatin-Induced Peripheral Neuropathy via TRPA1 Stimulation in Mice Dorsal Root Ganglion Is Correlated with Aluminum Accumulation

PubMed Central

Roh, Kangsan; Kil, Eui-Joon; Lee, Minji; Auh, Chung-Kyun; Lee, Myung-Ah; Yeom, Chang-Hwan; Lee, Sukchan

2015-01-01

Oxaliplatin is a platinum-based anticancer drug used to treat metastatic colorectal, breast, and lung cancers. While oxaliplatin kills cancer cells effectively, it exhibits several side effects of varying severity. Neuropathic pain is commonly experienced during treatment with oxaliplatin. Patients describe symptoms of paresthesias or dysesthesias that are triggered by cold (acute neuropathy), or as abnormal sensory or motor function (chronic neuropathy). In particular, we found that aluminum levels were relatively high in some cancer patients suffering from neuropathic pain based on clinical observations. Based on these findings, we hypothesized that aluminum accumulation in the dorsal root ganglion (DRG) in the course of oxaliplatin treatment exacerbates neuropathic pain. In mice injected with oxaliplatin (three cycles of 3 mg/kg i.p. daily for 5 days, followed by 5 days of rest), we detected cold allodynia using the acetone test, but not heat hyperalgesia using a hot plate. However, co-treatment with aluminum chloride (AlCl3∙6H2O; 7 mg/kg i.p. for 14 days: equivalent 0.78 mg/kg of elemental Al) and oxaliplatin (1 cycle of 3 mg/kg i.p. daily for 5 days, followed by 5 days of rest) synergistically induced cold allodynia as well as increased TRPAl mRNA and protein expression. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis showed a significant increase in aluminum concentrations in the DRG of mice treated with aluminum chloride and oxaliplatin compared to aluminum chloride alone. Similarly, in a mouse induced-tumor model, aluminum concentrations were increased in DRG tissue and tumor cells after oxaliplatin treatment. Taken together, these findings suggest that aluminum accumulation in the DRG may exacerbate neuropathic pain in oxaliplatin-treated mice. PMID:25928068

77 FR 59931 - Single Source Program Expansion Supplement Award to Area Health Education Centers (AHEC) Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... Grantee--University of Guam School of Nursing. SUMMARY: The Health Resources and Services Administration... supplement award to the University of Guam School of Nursing, an Area Health Education Center (AHEC) Program grantee, to coordinate the U.S. Affiliated Pacific Islands (USAPI) Nursing Program Capacity Strengthening...

Development of an Online Smartphone-Based eLearning Nutrition Education Program for Low-Income Individuals.

PubMed

Stotz, Sarah; Lee, Jung Sun

2018-01-01

The objective of this report was to describe the development process of an innovative smartphone-based electronic learning (eLearning) nutrition education program targeted to Supplemental Nutrition Assistance Program-Education-eligible individuals, entitled Food eTalk. Lessons learned from the Food eTalk development process suggest that it is critical to include all key team members from the program's inception using effective inter-team communication systems, understand the unique resources needed, budget ample time for development, and employ an iterative development and evaluation model. These lessons have implications for researchers and funding agencies in developing an innovative evidence-based eLearning nutrition education program to an increasingly technology-savvy, low-income audience. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Who gets how much: funding formulas in federal public health programs.

PubMed

Buehler, James W; Holtgrave, David R

2007-01-01

Federal public health programs use a mix of formula-based and competitive methods to allocate funds among states and other constituent jurisdictions. Characteristics of formula-based allocations used by a convenience sample of four programs, three from the Centers for Disease Control and Prevention and one from the Health Resources and Services Administration, are described to illustrate formula-based allocation methods in public health. Data sources in these public health formulas include population counts and funding proportions based on historical precedent. None include factors that adjust allocations based on variations in the availability of local resources or the cost of delivering services. Formula-funded activities are supplemented by programs that target specific prevention needs or encourage development of innovative methods to address emerging problems, using set-aside funds. A public health finance research agenda should address ways to improve the fit between funding allocation formulas and program objectives.

A WIC-Based Intervention to Prevent Early Childhood Overweight

ERIC Educational Resources Information Center

Whaley, Shannon E.; McGregor, Samar; Jiang, Lu; Gomez, Judy; Harrison, Gail; Jenks, Eloise

2010-01-01

Objective: To evaluate the impact of a Special Supplemental Nutrition Program for Women, Infants, and Children (WIC)-based intervention on the food and beverage intake, physical activity, and television watching of children ages 1-5. Design: Longitudinal surveys of intervention and control participants at baseline, 6 months, and 12 months.…

75 FR 59622 - Supplemental Determination for Renewable Fuels Produced Under the Final RFS2 Program From Canola Oil

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... also finalizes our regulatory determination that canola oil biodiesel meets the biomass-based diesel... biodiesel fuel to generate biomass-based diesel Renewable Identification Numbers (RINs), providing that the fuel meets other definitional criteria for renewable fuel (e.g., produced from renewable biomass as...

A School-Based Phonological Awareness Intervention for Struggling Readers in Early French Immersion

ERIC Educational Resources Information Center

Wise, Nancy; D'Angelo, Nadia; Chen, Xi

2016-01-01

The current intervention study investigated the sustained effectiveness of phonological awareness training on the reading development of 16 children in French immersion who were identified as at-risk readers based on grade 1 English measures. The intervention program provided children from three cohorts with supplemental reading in small groups on…

Lead-free precussion primer mixes based on metastable interstitial composite (MIC) technology

DOEpatents

Dixon, George P.; Martin, Joe A.; Thompson, Don

1998-01-01

A lead-free percussion primer composition and a percussion cup containing e composition. The lead-free percussion primer composition is comprised of a mixture of about 45 wt % aluminum powder having an outer coating of aluminum oxide and molybdenum trioxide powder or a mixture of about 50 wt % aluminum powder having an outer coating of aluminum oxide and polytetrafluoroethylene powder. The aluminum powder, molybdenum trioxide powder and polytetrafluoroethylene powder has a particle size of 0.1 .mu.m or less, more preferably a particle size of from about 200-500 angstroms.

Elaborated Odor Test for Extended Exposure

NASA Technical Reports Server (NTRS)

Buchanan, Vanessa D.; Henry, Emily J.; Mast, Dion J.; Harper, Susana A.; Beeson, Harold D.; Tapia, Alma S.

2016-01-01

Concerns were raised when incidental exposure to a proprietary bonding material revealed the material had an irritating odor. The NASA-STD-6001B document describes a supplemental test method option for programs to evaluate materials with odor concerns (Test 6, Odor Assessment). In addition to the supplemental standard odor assessment with less than 10 seconds of exposure, the NASA White Sands Test Facility (WSTF) Materials Flight Acceptance Testing section was requested to perform an odor test with an extended duration to evaluate effects of an extended exposure and to more closely simulate realistic exposure scenarios. With approval from the NASA Johnson Space Center Industrial Hygienist, WSTF developed a 15-minute odor test method. WSTF performed this extended-duration odor test to evaluate the odor and physical effects of the bonding material configured between two aluminum plates, after the safety of the gas was verified via toxicity analysis per NASA-STD-6001B Test 7, Determination of Offgassed Products. During extended-duration testing, odor panel members were arranged near the test material in a small room with the air handlers and doors closed to minimize dilution. The odor panel members wafted gas toward themselves and recorded their individual assessments of odor and physical effects at various intervals during the 15-minute exposure and posttest. A posttest interview was conducted to obtain further information. Testing was effective in providing data for comparison and selection of an optimal offgassing and odor containment configuration. The developed test method for extended exposure is proposed as a useful tool for further evaluating materials with identified odors of concern if continued use of the material is anticipated.

Comparing Laser Welding Technologies with Friction Stir Welding for Production of Aluminum Tailor-Welded Blanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hovanski, Yuri; Carsley, John; Carlson, Blair

2014-01-15

A comparison of welding techniques was performed to determine the most effective method for producing aluminum tailor-welded blanks for high volume automotive applications. Aluminum sheet was joined with an emphasis on post weld formability, surface quality and weld speed. Comparative results from several laser based welding techniques along with friction stir welding are presented. The results of this study demonstrate a quantitative comparison of weld methodologies in preparing tailor-welded aluminum stampings for high volume production in the automotive industry. Evaluation of nearly a dozen welding variations ultimately led to down selecting a single process based on post-weld quality and performance.

Highly porous micro-roughened structures developed on aluminum surface using the jet of rotating arc discharges at atmospheric pressure

NASA Astrophysics Data System (ADS)

Asadollahi, Siavash; Farzaneh, Masoud; Stafford, Luc

2018-02-01

Aluminum 6061 samples were exposed to the jet of an atmospheric pressure rotating arc discharge operated in either nitrogen or air. After multiple passes of treatment with an air-based plasma jet at very short source-to-substrate distances, scanning electron microscopy combined with x-ray photoelectron spectroscopy revealed a highly porous micro-roughened alumina-based structure on the surface of aluminum. Based on optical emission spectroscopy and high-speed optical imaging of the jet interacting with aluminum samples, it was found that the process is mainly driven by the energy transfer from the plasma source to the surface through transient plasma-transferred arcs. The occurrence of multiple arc discharges over very short time scales can induce rapid phase transformations of aluminum with characteristics similar to the ones usually observed during laser ablation of materials with femto- to nanosecond laser pulses or during the formation of cathode spots on the surface of metals.

Reinforcing aluminum alloys with high strength fibers

NASA Technical Reports Server (NTRS)

Kolpashnikov, A. I.; Manuylov, V. F.; Chukhin, B. D.; Shiryayev, Y. V.; Shurygin, A. S.

1982-01-01

A study is made of the possibility of reinforcing aluminum and aluminum based alloys with fibers made of high strength steel wire. The method of introducing the fibers is described in detail. Additional strengthening by reinforcement of the high alloy system Al - An - Mg was investigated.

Nanostructuring of Aluminum Alloy Powders by Cryogenic Attrition with Hydrogen-Free Process Control Agent

DTIC Science & Technology

2015-02-01

Nanostructuring of Aluminum Alloy Powders by Cryogenic Attrition with Hydrogen-Free Process Control Agent by Frank Kellogg , Clara Hofmeister...Process Control Agent Frank Kellogg Bowhead Science and Technology Clara Hofmeister Advanced Materials Processing and Analysis Center...NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Frank Kellogg , Clara Hofmeister, Anit Giri, and Kyu Cho 5d. PROJECT NUMBER 5e

Domestic Aluminum Resources: Dilemmas of Development. Volume II. Appendixes II-VII. Detailed Agency Comments and GAO Response.

DTIC Science & Technology

1980-07-17

31 Clay/hydrochloric acid, gas - induced crystallization 32 Clay/nitric acid evaporative crystallization 32 Clay/hydrochloric acid, evapora- tive...ALUMINA AND ALUMINUM TECHNOLOGIES 53 Evaluation of nonbauxitic alumina production processes 54 Clay/carbo-chlorination 54 Clay/hydrochloric acid, gas ...reports that the miniplant program is centered on a single process-- clay/hydrochloric acid- gas precipitation. The Bureau of Mines has not retreated

Investigation of the Explosive Potential of the Hybrid Propellant Combinations N2O4/PBAN and CTF/PBAN

DTIC Science & Technology

1967-03-01

nitrogen tetroxide (N„0 ) and polybutadyne-aluminum (PBAN), and chlorine trifluoride (CTF) and PBAN. This program consisted of a series of eight...explosive potential of two hybrid propellant combinations; nitrogen tetroxide QLOL) and polybutadyne - aluminum (PBAN) and chlorine triflouride (CTF...or positive-phase impulse yield. FREE AIR OVERPRESSURE: (OR FREE FIELD OVERPRESSURE): The unreflected pressure, in excess of the ambient atmospheric

Validity of the Aluminum Equivalent Approximation in Space Radiation Shielding

NASA Technical Reports Server (NTRS)

Badavi, Francis F.; Adams, Daniel O.; Wilson, John W.

2009-01-01

The origin of the aluminum equivalent shield approximation in space radiation analysis can be traced back to its roots in the early years of the NASA space programs (Mercury, Gemini and Apollo) wherein the primary radiobiological concern was the intense sources of ionizing radiation causing short term effects which was thought to jeopardize the safety of the crew and hence the mission. Herein, it is shown that the aluminum equivalent shield approximation, although reasonably well suited for that time period and to the application for which it was developed, is of questionable usefulness to the radiobiological concerns of routine space operations of the 21 st century which will include long stays onboard the International Space Station (ISS) and perhaps the moon. This is especially true for a risk based protection system, as appears imminent for deep space exploration where the long-term effects of Galactic Cosmic Ray (GCR) exposure is of primary concern. The present analysis demonstrates that sufficiently large errors in the interior particle environment of a spacecraft result from the use of the aluminum equivalent approximation, and such approximations should be avoided in future astronaut risk estimates. In this study, the aluminum equivalent approximation is evaluated as a means for estimating the particle environment within a spacecraft structure induced by the GCR radiation field. For comparison, the two extremes of the GCR environment, the 1977 solar minimum and the 2001 solar maximum, are considered. These environments are coupled to the Langley Research Center (LaRC) deterministic ionized particle transport code High charge (Z) and Energy TRaNsport (HZETRN), which propagates the GCR spectra for elements with charges (Z) in the range I <= Z <= 28 (H -- Ni) and secondary neutrons through selected target materials. The coupling of the GCR extremes to HZETRN allows for the examination of the induced environment within the interior' of an idealized spacecraft as approximated by a spherical shell shield, and the effects of the aluminum equivalent approximation for a good polymeric shield material such as genetic polyethylene (PE). The shield thickness is represented by a 25 g/cm spherical shell. Although one could imagine the progression to greater thickness, the current range will be sufficient to evaluate the qualitative usefulness of the aluminum equivalent approximation. Upon establishing the inaccuracies of the aluminum equivalent approximation through numerical simulations of the GCR radiation field attenuation for PE and aluminum equivalent PE spherical shells, we Anther present results for a limited set of commercially available, hydrogen rich, multifunctional polymeric constituents to assess the effect of the aluminum equivalent approximation on their radiation attenuation response as compared to the generic PE.

A descriptive evaluation of the Seattle Police Department's crisis response team officer/mental health professional partnership pilot program.

PubMed

Helfgott, Jacqueline B; Hickman, Matthew J; Labossiere, Andre P

2016-01-01

The Seattle Police Department (SPD) recently enhanced their response to individuals in behavioral crisis through a pilot Crisis Response Team (CRT) consisting of dedicated Crisis Intervention Team (CIT) officers (OFC) paired with a Mental Health Professional (MHP). This study presents results of an incident-based descriptive evaluation of the SPD's CRT pilot program, implemented from 2010 to 2012. The purpose of the evaluation was to determine the value-added by the MHP in cases involving individuals in behavioral crisis as well as the effectiveness of the CRT program with regard to resolution time, repeat contacts, and referral to services. Data were collected from SPD general offense and supplemental reports for a 12-month segment of the program. Key variables included incident location, case clearance, repeat contacts, linkages to services, and case disposition. Results of analyses of general offense and supplemental reports are presented and implications for future development of the OFC/MHP partnership are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Behavior of Environmentally Friendly Corrosion Preventative Compounds in an Aggressive Coastal Marine Environment

NASA Technical Reports Server (NTRS)

Montgomery, Eliza L.; Calle, Luz Marina; Curran Jerome C.; Kolody, Mark R.

2013-01-01

The shift to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. The CPCs, while a temporary protective coating, must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different soft film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. The CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing . The initial results for the fifteen CPC systems are reported : Key words: corrosion preventive compound, CPC, spaceport, environmentally friendly, atmospheric exposure, marine, carbon steel, aluminum alloy, galvanic corrosion, wire on bolt.

[Research on fast classification based on LIBS technology and principle component analyses].

PubMed

Yu, Qi; Ma, Xiao-Hong; Wang, Rui; Zhao, Hua-Feng

2014-11-01

Laser-induced breakdown spectroscopy (LIBS) and the principle component analysis (PCA) were combined to study aluminum alloy classification in the present article. Classification experiments were done on thirteen different kinds of standard samples of aluminum alloy which belong to 4 different types, and the results suggested that the LIBS-PCA method can be used to aluminum alloy fast classification. PCA was used to analyze the spectrum data from LIBS experiments, three principle components were figured out that contribute the most, the principle component scores of the spectrums were calculated, and the scores of the spectrums data in three-dimensional coordinates were plotted. It was found that the spectrum sample points show clear convergence phenomenon according to the type of aluminum alloy they belong to. This result ensured the three principle components and the preliminary aluminum alloy type zoning. In order to verify its accuracy, 20 different aluminum alloy samples were used to do the same experiments to verify the aluminum alloy type zoning. The experimental result showed that the spectrum sample points all located in their corresponding area of the aluminum alloy type, and this proved the correctness of the earlier aluminum alloy standard sample type zoning method. Based on this, the identification of unknown type of aluminum alloy can be done. All the experimental results showed that the accuracy of principle component analyses method based on laser-induced breakdown spectroscopy is more than 97.14%, and it can classify the different type effectively. Compared to commonly used chemical methods, laser-induced breakdown spectroscopy can do the detection of the sample in situ and fast with little sample preparation, therefore, using the method of the combination of LIBS and PCA in the areas such as quality testing and on-line industrial controlling can save a lot of time and cost, and improve the efficiency of detection greatly.

Numerical Simulation and Chaotic Analysis of an Aluminum Holding Furnace

NASA Astrophysics Data System (ADS)

Wang, Ji-min; Zhou, Yuan-yuan; Lan, Shen; Chen, Tao; Li, Jie; Yan, Hong-jie; Zhou, Jie-min; Tian, Rui-jiao; Tu, Yan-wu; Li, Wen-ke

2014-12-01

To achieve high heat efficiency, low pollutant emission and homogeneous melt temperature during thermal process of secondary aluminum, taking into account the features of aluminum alloying process, a CFD process model was developed and integrated with heat load and aluminum temperature control model. This paper presented numerical simulation of aluminum holding furnaces using the customized code based on FLUENT packages. Thermal behaviors of aluminum holding furnaces were investigated by probing into main physical fields such as flue gas temperature, velocity, and concentration, and combustion instability of aluminum holding process was represented by chaos theory. The results show that aluminum temperature uniform coefficient firstly decreases during heating phase, then increases and reduces alternately during holding phase, lastly rises during standing phase. Correlation dimension drops with fuel velocity. Maximal Lyapunov exponent reaches to a maximum when air-fuel ratio is close to 1. It would be a clear comprehension about each phase of aluminum holding furnaces to find new technology, retrofit furnace design, and optimize parameters combination.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Qiang; Kelly, Jarod C.; Burnham, Andrew

This report serves as an update for the life-cycle analysis (LCA) of aluminum production based on the most recent data representing the state-of-the-art of the industry in North America. The 2013 Aluminum Association (AA) LCA report on the environmental footprint of semifinished aluminum products in North America provides the basis for the update (The Aluminum Association, 2013). The scope of this study covers primary aluminum production, secondary aluminum production, as well as aluminum semi-fabrication processes including hot rolling, cold rolling, extrusion and shape casting. This report focuses on energy consumptions, material inputs and criteria air pollutant emissions for each processmore » from the cradle-to-gate of aluminum, which starts from bauxite extraction, and ends with manufacturing of semi-fabricated aluminum products. The life-cycle inventory (LCI) tables compiled are to be incorporated into the vehicle cycle model of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) Model for the release of its 2015 version.« less

Developing an online certification program for nutrition education assistants.

PubMed

Christofferson, Debra; Christensen, Nedra; LeBlanc, Heidi; Bunch, Megan

2012-01-01

To develop an online certification program for nutrition education paraprofessionals to increase knowledge and confidence and to overcome training barriers of programming time and travel expenses. An online interactive certification course based on Supplemental Nutrition Assistance Program-Education and Expanded Food and Nutrition Education Program core competencies was delivered to employees of both programs. Traditional vs online training was compared. Course content validity was determined through expert review by registered dietitians. Parameters studied included increase of nutrition knowledge and teaching technique/ability, educator satisfaction, and programming costs related to training. Utah State University Extension. Twenty-two Supplemental Nutrition Assistance Program-Education and Expanded Food and Nutrition Education Program educators in Utah. Knowledge and skills were measured using pre/posttest statistics. Participant satisfaction was measured with a survey. Paired t test; satisfaction survey. The change in paraprofessional knowledge score was statistically significant (P < .001). Forty percent of paraprofessionals strongly agreed and 60% agreed they were better prepared as nutrition educators because of the training. An estimated $16,000 was saved by providing the training online as compared to a face-to-face training. This interactive online program is a cost-effective way to increase paraprofessional knowledge and job satisfaction. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

78 FR 3390 - Agency Information Collection Activities: Proposed Collection; Comment Request-FNS-380, Worksheet...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... for the Supplemental Nutrition Assistance Program Quality Control Reviews AGENCY: Food and Nutrition... Nutrition Assistance Program's Quality Control Reviews. DATES: Written comments must be received on or...: Worksheet for the Supplemental Nutrition Assistance Program's (SNAP) Quality Control Reviews. Form Number...

Aluminum structural applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, G.

Extensive research by aluminum producers and automakers in the 1980s resulted in the development of technologies that enable building of aluminum cars that meet and exceed all the expectations of today`s drivers and passengers, yet weigh several hundred pounds less than their steel counterparts. The Acura NSX sports car, the Audi A8, and the Jaguar XJ220 have all been introduced. Ford has built 40 aluminum-intensive automobiles based on the Taurus/Sable for test purposes, and General Motors recently announced an aluminum-structured electric vehicle. The design flexibility that aluminum allows is shown by these examples. Each uses a somewhat different technology thatmore » is particularly suited to the vehicle and its market.« less

The Use af Ion Vapor Deposited Aluminum (IVD) for the Space Shuttle Solid Rocket Booster (SRB)

NASA Technical Reports Server (NTRS)

Novak, Howard L.

2002-01-01

The USA LLC Materials & Processes (M&P) Engineering Department had recommended the application and evaluation of Ion Vapor Deposition (IVD) aluminum to SRB Hardware for corrosion protection and elimination of hazardous materials and processes such as cadmium plating. IVD is an environmentally friendly process that has no volatile organic compounds (VOCs), or hazardous waste residues. It lends itself to use with hardware exposed to corrosive seacoast environments as found at Kennedy Space Center (KSC), and Cape Canaveral Air Force Station (CCAFS), Florida. Lifting apparatus initially coated with cadmium plating for corrosion protection; was stripped and successfully re-coated with IVD aluminum after the cadmium plating no longer protected the GSE from corrosion, Since then, and after completion of a significant test program, the first flight application of the IVD Aluminum process on the Drogue Parachute Ratchet Assembly is scheduled for 2002.

Assessing Program Coverage of Two Approaches to Distributing a Complementary Feeding Supplement to Infants and Young Children in Ghana

PubMed Central

Aaron, Grant J.; Strutt, Nicholas; Boateng, Nathaniel Amoh; Guevarra, Ernest; Siling, Katja; Norris, Alison; Ghosh, Shibani; Nyamikeh, Mercy; Attiogbe, Antoine; Burns, Richard; Foriwa, Esi; Toride, Yasuhiko; Kitamura, Satoshi; Tano-Debrah, Kwaku; Sarpong, Daniel; Myatt, Mark

2016-01-01

The work reported here assesses the coverage achieved by two sales-based approaches to distributing a complementary food supplement (KOKO Plus™) to infants and young children in Ghana. Delivery Model 1 was conducted in the Northern Region of Ghana and used a mixture of health extension workers (delivering behavior change communications and demand creation activities at primary healthcare centers and in the community) and petty traders recruited from among beneficiaries of a local microfinance initiative (responsible for the sale of the complementary food supplement at market stalls and house to house). Delivery Model 2 was conducted in the Eastern Region of Ghana and used a market-based approach, with the product being sold through micro-retail routes (i.e., small shops and roadside stalls) in three districts supported by behavior change communications and demand creation activities led by a local social marketing company. Both delivery models were implemented sub-nationally as 1-year pilot programs, with the aim of informing the design of a scaled-up program. A series of cross-sectional coverage surveys was implemented in each program area. Results from these surveys show that Delivery Model 1 was successful in achieving and sustaining high (i.e., 86%) effective coverage (i.e., the child had been given the product at least once in the previous 7 days) during implementation. Effective coverage fell to 62% within 3 months of the behavior change communications and demand creation activities stopping. Delivery Model 2 was successful in raising awareness of the product (i.e., 90% message coverage), but effective coverage was low (i.e., 9.4%). Future programming efforts should use the health extension / microfinance / petty trader approach in rural settings and consider adapting this approach for use in urban and peri-urban settings. Ongoing behavior change communications and demand creation activities is likely to be essential to the continued success of such programming. PMID:27755554

Assessing Program Coverage of Two Approaches to Distributing a Complementary Feeding Supplement to Infants and Young Children in Ghana.

PubMed

Aaron, Grant J; Strutt, Nicholas; Boateng, Nathaniel Amoh; Guevarra, Ernest; Siling, Katja; Norris, Alison; Ghosh, Shibani; Nyamikeh, Mercy; Attiogbe, Antoine; Burns, Richard; Foriwa, Esi; Toride, Yasuhiko; Kitamura, Satoshi; Tano-Debrah, Kwaku; Sarpong, Daniel; Myatt, Mark

2016-01-01

The work reported here assesses the coverage achieved by two sales-based approaches to distributing a complementary food supplement (KOKO Plus™) to infants and young children in Ghana. Delivery Model 1 was conducted in the Northern Region of Ghana and used a mixture of health extension workers (delivering behavior change communications and demand creation activities at primary healthcare centers and in the community) and petty traders recruited from among beneficiaries of a local microfinance initiative (responsible for the sale of the complementary food supplement at market stalls and house to house). Delivery Model 2 was conducted in the Eastern Region of Ghana and used a market-based approach, with the product being sold through micro-retail routes (i.e., small shops and roadside stalls) in three districts supported by behavior change communications and demand creation activities led by a local social marketing company. Both delivery models were implemented sub-nationally as 1-year pilot programs, with the aim of informing the design of a scaled-up program. A series of cross-sectional coverage surveys was implemented in each program area. Results from these surveys show that Delivery Model 1 was successful in achieving and sustaining high (i.e., 86%) effective coverage (i.e., the child had been given the product at least once in the previous 7 days) during implementation. Effective coverage fell to 62% within 3 months of the behavior change communications and demand creation activities stopping. Delivery Model 2 was successful in raising awareness of the product (i.e., 90% message coverage), but effective coverage was low (i.e., 9.4%). Future programming efforts should use the health extension / microfinance / petty trader approach in rural settings and consider adapting this approach for use in urban and peri-urban settings. Ongoing behavior change communications and demand creation activities is likely to be essential to the continued success of such programming.

First-principles surface interaction studies of aluminum-copper and aluminum-copper-magnesium secondary phases in aluminum alloys

NASA Astrophysics Data System (ADS)

da Silva, Thiago H.; Nelson, Eric B.; Williamson, Izaak; Efaw, Corey M.; Sapper, Erik; Hurley, Michael F.; Li, Lan

2018-05-01

First-principles density functional theory-based calculations were performed to study θ-phase Al2Cu, S-phase Al2CuMg surface stability, as well as their interactions with water molecules and chloride (Cl-) ions. These secondary phases are commonly found in aluminum-based alloys and are initiation points for localized corrosion. Density functional theory (DFT)-based simulations provide insight into the origins of localized (pitting) corrosion processes of aluminum-based alloys. For both phases studied, Cl- ions cause atomic distortions on the surface layers. The nature of the distortions could be a factor to weaken the interlayer bonds in the Al2Cu and Al2CuMg secondary phases, facilitating the corrosion process. Electronic structure calculations revealed not only electron charge transfer from Cl- ions to alloy surface but also electron sharing, suggesting ionic and covalent bonding features, respectively. The S-phase Al2CuMg structure has a more active surface than the θ-phase Al2Cu. We also found a higher tendency of formation of new species, such as Al3+, Al(OH)2+, HCl, AlCl2+, Al(OH)Cl+, and Cl2 on the S-phase Al2CuMg surface. Surface chemical reactions and resultant species present contribute to establishment of local surface chemistry that influences the corrosion behavior of aluminum alloys.

A low-cost photovoltaic cell process based on thick film techniques

NASA Technical Reports Server (NTRS)

Mardesich, N.; Pepe, A.; Bunyan, S.; Edwards, B.; Olson, C.

1980-01-01

The low-cost, easily automated processing for solar cell fabrication being developed at Spectrolab for the DOE LSA program is described. These processes include plasma-etching, spray-on diffusion sources and antireflective coating, thick film metallization, aluminum back contacts, laser scribing and ultrasonic soldering. The process sequence has been shown to produce solar cells having 15% conversion efficiency at AM1 which meet the cell fabrication budget required for the DOE 1986 cost goal of $0.70 per peak watt in 1980.

Supplemental instruction in chemistry

NASA Astrophysics Data System (ADS)

Lundeberg, Mary A.

This study was designed to measure some effects of supplemental instruction in chemistry. Supplemental instruction is a peer-led cooperative learning program that encourages students to develop conceptual understanding by articulating both understandings and misconceptions in a think-aloud fashion. Supplemental instruction was offered three hours weekly outside of class and lab time for students in four classes of General Organic and Biological Chemistry. Over a two-year period 108 students volunteered to participate in this program; 45 students did not participate. As measured by final grades in chemistry and responses to a questionnaire, supplemental instruction was effective in increasing students' achievement in chemistry. Further research is needed to determine the in-depth effects of supplemental instruction on students' learning, problem solving, and self-esteem.

77 FR 61002 - Announcement of the Award of Single-Source Program Expansion Supplement Grants to Seven Assets...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-05

.... Grantees also ensure that participants have access to financial literacy education and coaching such as.../ 2017. FOR FURTHER INFORMATION CONTACT: Al Fleming, Program Manager, Assets for Independence, 370 L... . SUPPLEMENTARY INFORMATION: The following AFI grantees will receive single-source program expansion supplement...

77 FR 58403 - Announcing the Award of 24 Single-Source Program Expansion Supplement Grants Under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

...] Announcing the Award of 24 Single-Source Program Expansion Supplement Grants Under the Unaccompanied Alien... under its Unaccompanied Alien Children's (UAC) Program where grantees provide a range of custodial/residential shelter care and services for recently arrived unaccompanied alien children. SUMMARY: The...

49 CFR 213.305 - Designation of qualified individuals; general qualifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... college level engineering program, supplemented by special on the job training emphasizing the techniques... of high speed track provided by the employer or by a college level engineering program, supplemented... maintenance of high speed track provided by the employer or by a college level engineering program...

49 CFR 213.305 - Designation of qualified individuals; general qualifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... college level engineering program, supplemented by special on the job training emphasizing the techniques... of high speed track provided by the employer or by a college level engineering program, supplemented... maintenance of high speed track provided by the employer or by a college level engineering program...

49 CFR 213.305 - Designation of qualified individuals; general qualifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... college level engineering program, supplemented by special on the job training emphasizing the techniques... of high speed track provided by the employer or by a college level engineering program, supplemented... maintenance of high speed track provided by the employer or by a college level engineering program...

75 FR 30756 - Medicare Program; Supplemental Proposed Changes to the Hospital Inpatient Prospective Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

.... 93.773, Medicare--Hospital Insurance; and Program No. 93.774, Medicare-- Supplementary Medical... technical errors that appeared in the supplementary proposed rule entitled ``Medicare Program; Supplemental... Doc. 2010-12567 filed May 21, 2010, there are technical and typographical errors that are identified...

Four-month course of soluble milk proteins interacts with exercise to improve muscle strength and delay fatigue in elderly participants.

PubMed

Gryson, Céline; Ratel, Sébastien; Rance, Mélanie; Penando, Stéphane; Bonhomme, Cécile; Le Ruyet, Pascale; Duclos, Martine; Boirie, Yves; Walrand, Stéphane

2014-12-01

The benefit of protein supplementation on the adaptive response of muscle to exercise training in older people is controversial. To investigate the independent and combined effects of a multicomponent exercise program with and without a milk-based nutritional supplement on muscle strength and mass, lower-extremity fatigue, and metabolic markers. A sample of 48 healthy sedentary men aged 60.8 ± 0.4 years were randomly assigned to a 16-week multicomponent exercise training program with a milk-based supplement containing, besides proteins [total milk proteins 4 or 10 g/day or soluble milk proteins rich in leucine (PRO) 10 g/day], carbohydrates and fat. Body composition, muscle mass and strength, and time to task failure, an index of muscle fatigue, were measured. Blood lipid, fibrinogen, creatine phosphokinase, glucose, insulin, C-reactive protein, interleukin-6, tumor necrosis factor-α soluble receptors, and endothelial markers were assessed. Body fat mass was reduced after the 4-month training program in groups receiving 10 g/day of protein supplementation (P < .01). The training program sustained with the daily 10 g/day PRO was associated with a significant increase in dominant fat free mass (+5.4%, P < .01) and in appendicular muscle mass (+4.5%, P < .01). Blood cholesterol was decreased in the trained group receiving 10 g/day PRO. The index of insulin resistance (homeostasis model assessment-insulin resistance) and blood creatine phosphokinase were reduced in the groups receiving 10 g/day PRO, irrespective of exercise. The inflammatory and endothelial markers were not different between the groups. Training caused a significant improvement (+10.6% to 19.4%, P < .01) in the maximal oxygen uptake. Increased maximum voluntary contraction force was seen in the trained groups receiving 10 g/day of proteins (about 3%, P < .05). Time to task failure was improved in the trained participants receiving a 10 g/day supplementation with PRO (P < .01). Soluble milk proteins rich in leucine improved time to muscle failure and increase in skeletal muscle mass and strength after prolonged multicomponent exercise training in healthy older men. Copyright © 2014 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Bauxite Mine Rehabilitation Programs — A Progress Report Patrick Atkins, Alcoa Inc.

NASA Astrophysics Data System (ADS)

Donaldson, Don; Raahauge, Benny E.

Bauxite is the primary source of raw material for the production of aluminum oxide and aluminum metal. At the current primary aluminum production level, known bauxite reserves will last for hundreds of years. Two to three tonnes of bauxite are required to produce one tonne of alumina and two tonnes of alumina are required to produce one tonne of aluminum metal. Typical bauxites contain from 30%-60% aluminum hydroxides and various levels of iron, silica, and titanium impurities. Approximately 125 million tonnes of bauxite are mined each year from 45 mines located on every continent except Antarctica. The major mining areas are located in the tropics, above and below the equator, as well as in Western Australia, the Caribbean Region, and the Mediterranean. Most bauxite is surface mined, although a few small underground mines remain active. The overburden depth ranges from almost none to several 10s of meters, with the average near five meters. The total land disturbed by bauxite mining each year is estimated to be 2,000-2,500 hectares per year.

Research on connection structure of aluminumbody bus using multi-objective topology optimization

NASA Astrophysics Data System (ADS)

Peng, Q.; Ni, X.; Han, F.; Rhaman, K.; Ulianov, C.; Fang, X.

2018-01-01

For connecting Aluminum Alloy bus body aluminum components often occur the problem of failure, a new aluminum alloy connection structure is designed based on multi-objective topology optimization method. Determining the shape of the outer contour of the connection structure with topography optimization, establishing a topology optimization model of connections based on SIMP density interpolation method, going on multi-objective topology optimization, and improving the design of the connecting piece according to the optimization results. The results show that the quality of the aluminum alloy connector after topology optimization is reduced by 18%, and the first six natural frequencies are improved and the strength performance and stiffness performance are obviously improved.

Multiphase aluminum equations of state via density functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjostrom, Travis; Crockett, Scott; Rudin, Sven

2016-10-03

We have performed density functional theory (DFT) based calculations for aluminum in extreme conditions of both pressure and temperature, up to five times compressed ambient density, and over 1 000 000 K in temperature. In order to cover such a domain, DFT methods including phonon calculations, quantum molecular dynamics, and orbital-free DFT are employed. Our results are then used to construct a SESAME equation of state for the aluminum 1100 alloy, encompassing the fcc, hcp, and bcc solid phases as well as the liquid regime. We also provide extensive comparison with experiment, and based on this we also provide amore » slightly modified equation of state for the aluminum 6061 alloy.« less

Activated alumina preparation and characterization: The review on recent advancement

NASA Astrophysics Data System (ADS)

Rabia, A. R.; Ibrahim, A. H.; Zulkepli, N. N.

2018-03-01

Aluminum and aluminum based material are significant industrial materials synthesis because of their abandonment, low weight and high-quality corrosion resistance. The most advances in aluminum processing are the ability to synthesize it's under suitable chemical composition and conditions, a porous structure can be formed on the surface. Activated alumina particles (AAP) synthesized by the electrochemically process from aluminum have gained serious attention, inexpensive material that can be employed for water filtration due to its active surface. Thus, the paper present a review study based on recent progress and advances in synthesizing activated alumina, various techniques currently being used in preparing activated alumina and its characteristics are studied and summarized

Family Welfare Reform Act. Hearings on H.R. 1720 To Replace the Existing AFDC Program with a New Family Support Program...before the Subcommittee on Public Assistance and Unemployment Compensation of the Committee on Ways and Means. House of Representatives, One Hundredth Congress, First Session (March 30; April 1, 1987).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Ways and Means.

These hearings concern proposed legislation to replace Aid to Families with Dependent Children (AFDC) with a new family support program. The new program would emphasize work, child support, and need-based family support supplements. Families would be assisted in obtaining education, training, and employment in order to avoid long-term dependence…

Moving beyond GK–12

PubMed Central

Ufnar, J. A.; Kuner, Susan; Shepherd, V. L.

2012-01-01

The National Science Foundation GK–12 program has made more than 300 awards to universities, supported thousands of graduate student trainees, and impacted thousands of K–12 students and teachers. The goals of the current study were to determine the number of sustained GK–12 programs that follow the original GK–12 structure of placing graduate students into classrooms and to propose models for universities with current funding or universities interested in starting a program. Results from surveys, literature reviews, and Internet searches of programs funded between 1999 and 2008 indicated that 19 of 188 funded sites had sustained in-classroom programs. Three distinct models emerged from an analysis of these programs: a full-stipend model, in which graduate fellows worked with partner teachers in a K–12 classroom for 2 d/wk; a supplemental stipend model in which fellows worked with teachers for 1 d/wk; and a service-learning model, in which in-classroom activity was integrated into university academic coursework. Based on these results, potential models for sustainability and replication are suggested, including establishment of formal collaborations between sustained GK–12 programs and universities interested in starting in-classroom programs; development of a new Teaching Experience for Fellows program; and integration of supplemental fellow stipends into grant broader-impact sections. PMID:22949421

Practical Math Skills: Situations--Strategies--Solutions. Intermediate Level. Grades 4-5-6.

ERIC Educational Resources Information Center

Duncan, Jim

This material is a supplement to existing mathematics programs for young learners. The activities presented are based on assumptions about the young problem solver which are difficult to address in standard mathematics texts. In these pages it is assumed that each learner brings to the problem-solving effort a very personal experience base and a…

The Effect of Accelerated Reader on Reading Scores in a Rural School District

ERIC Educational Resources Information Center

Hunter, Teresa A.

2013-01-01

In this study, the implementation of Accelerated Reader (AR), a computer-assisted supplemental reading program, was investigated as a research-based instructional strategy to assess whether it aided a high-performing, rural school district in meeting adequate yearly progress goals. The theoretical framework was based on Vygotsky's zone of…

INDOOR AIR QUALITY AND INHALATION EXPOSURE - SIMULATION TOOL KIT

EPA Science Inventory

A Microsoft Windows-based indoor air quality (IAQ) simulation software package is presented. Named Simulation Tool Kit for Indoor Air Quality and Inhalation Exposure, or IAQX for short, this package complements and supplements existing IAQ simulation programs and is desi...

23 CFR 1251.4 - Functions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Functions. 1251.4 Section 1251.4 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Program Manual (23 CFR 1204.4, Supplement B), based on evaluation of highway accidents and safety problems...

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... high quality, research-based, and specifically designed to increase the academic achievement of... State's approved provider list; (ii) Parent recommendations or results from parent surveys, if any... results from parent surveys regarding the success of the provider's instructional program in increasing...

77 FR 27277 - FTA Supplemental Fiscal Year 2012 Apportionments, Allocations, and Program Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... allocates Section 5309 Bus and Bus Facilities funds to bus testing and the Fuel Cell program. Tables... Fuel Cell program. FTA will issue a supplemental notice at a later date if additional contract... allocated CA, GA, MA E2012-BUSP-018 Fuel Cell Bus Program..... $13,500,000 PA E2012-BUSP-019 Bus Testing 3...

South Carolina State Program for Library Development. 1976-1981. The Fourth Supplement to the 1972-1977 Program.

ERIC Educational Resources Information Center

South Carolina State Library, Columbia.

Goals and objectives for library services, 1976-1981, are presented by the South Carolina Advisory Council on Libraries as a supplement to the original South Carolina State Program for Library Development, 1972-1977. Goals for the state library are in the areas of financial support, reference and interlibrary loan service, centralized programs,…

Use of low-cost aluminum in electric energy production

NASA Astrophysics Data System (ADS)

Zhuk, Andrey Z.; Sheindlin, Alexander E.; Kleymenov, Boris V.; Shkolnikov, Eugene I.; Lopatin, Marat Yu.

Suppression of the parasitic corrosion while maintaining the electrochemical activity of the anode metal is one of the serious problems that affects the energy efficiency of aluminum-air batteries. The need to use high-purity aluminum or special aluminum-based alloys results in a significant increase in the cost of the anode, and thus an increase in the total cost of energy generated by the aluminum-air battery, which narrows the range of possible applications for this type of power source. This study considers the process of parasitic corrosion as a method for hydrogen production. Hydrogen produced in an aluminum-air battery by this way may be further employed in a hydrogen-air fuel cell (Hy-air FC) or in a heat engine, or it may be burnt to generate heat. Therefore, anode materials may be provided by commercially pure aluminum, commercially produced aluminum alloys, and secondary aluminum. These materials are much cheaper and more readily available than special anode alloys of aluminum and high-purity aluminum. The aim of present study is to obtain experimental data for comparison of energy and cost parameters of some commercially produced aluminum alloys, of high-purity aluminum, and of a special Al-ln anode alloy in the context of using these materials as anodes for an Al-air battery and for combined production of electrical power and hydrogen.

Progress in Aluminum Electrolysis Control and Future Direction for Smart Aluminum Electrolysis Plant

NASA Astrophysics Data System (ADS)

Zhang, Hongliang; Li, Tianshuang; Li, Jie; Yang, Shuai; Zou, Zhong

2017-02-01

The industrial aluminum reduction cell is an electrochemistry reactor that operates under high temperatures and highly corrosive conditions. However, these conditions have restricted the measurement of key control parameters, making the control of aluminum reduction cells a difficult problem in the industry. Because aluminum electrolysis control systems have a significant economic influence, substantial research has been conducted on control algorithms, control systems and information systems for aluminum reduction cells. This article first summarizes the development of control systems and then focuses on the progress made since 2000, including alumina concentration control, temperature control and electrolyte molecular ratio control, fault diagnosis, cell condition prediction and control system expansion. Based on these studies, the concept of a smart aluminum electrolysis plant is proposed. The frame construction, key problems and current progress are introduced. Finally, several future directions are discussed.

Far-field acoustic data for the Texas ASE, Inc. Hush-House, supplement

NASA Astrophysics Data System (ADS)

Lee, R. A.

1982-04-01

This report supplements AFAMRL-TR-73-110, which describes the data base (NOISEFILE) used in the computer program (NOISEMAP) to predict the community noise exposure resulting from military aircraft operations. The results of field test measurements to define the single-event noise produced on the ground by military aircraft/engines operating in the Texas ASE Inc. hush-house are presented as a function of angle (0 to 180 from the front of the hush-house) and distance (200 ft to 2500 ft) in various acoustic metrics.

77 FR 25127 - Food and Nutrition Service

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Agency Information Collection Activities: Proposed Collection; Comment Request--Supplemental Nutrition Assistance Program-- Disaster Supplemental Nutrition Assistance Program (D-SNAP) AGENCY: Food and Nutrition Service, USDA. ACTION: Notice. SUMMARY: In...

General atomics low speed Maglev technology development program (Supplemental #3)

DOT National Transportation Integrated Search

2005-05-01

This report details accomplishments of the Low Speed Maglev Technology Development Program, Supplemental #3. The 4 major tasks included: guideway foundation construction, fabrication and installation of 7 guideway modules, system integration and test...

48 CFR 1815.407-2 - Make-or-buy programs. (NASA supplements paragraph (e))

Code of Federal Regulations, 2010 CFR

2010-10-01

... AERONAUTICS AND SPACE ADMINISTRATION CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1815.407-2 Make-or-buy programs. (NASA supplements paragraph (e)) (e)(1) Make-or-buy...

Aluminum 2195 T8 Gore Development for Space Launch System Core and Upper Stage

NASA Technical Reports Server (NTRS)

Volz, Martin

2015-01-01

Gores are pie-shaped panels that are welded together to form the dome ends of rocket fuel tanks as shown in figure 1. Replacing aluminum alloy 2219 with aluminum (Al)-lithium (Li) alloy 2195 as the Space Launch System (SLS) cryogenic tank material would save enormous amounts of weight. In fact, it has been calculated that simply replacing Al 2219 gores with Al 2195 gores on the SLS core stage domes could save approximately 3,800 pound-mass. This is because the Al-Li 2195 alloy exhibits both higher mechanical properties and lower density than the SLS baseline Al 2219 alloy. Indeed, the known advantages of Al 2195 led to its use as a replacement for Al 2219 in the shuttle external tank program. The required thicknesses of Al 2195 gores for either SLS core stage tanks or upper stage tanks will depend on the specific design configurations. The required thicknesses or widths may exceed the current experience base in the manufacture of such gores by the stretch-forming process. Accordingly, the primary objective of this project was to enhance the formability of Al 2195 by optimizing the heat treatment and stretch-forming process for gore thicknesses up to 0.75 inches, which envelop the maximum expected gore thicknesses for SLS tank configurations.

Nickel-coated Aluminum Particles: A Promising Fuel for Mars Missions

NASA Technical Reports Server (NTRS)

Shafirovich, Evgeny; Varma, Arvind

2004-01-01

Combustion of metals in carbon dioxide is a promising source of energy for propulsion on Mars. This approach is based on the ability of some metals (e.g. Mg, Al) to burn in CO2 atmosphere and suggests use of the Martian carbon dioxide as an oxidizer in jet or rocket engines. Analysis shows that CO2/metal propulsion will reduce significantly the mass of propellant transported from Earth for long-range mobility on Mars and sample return missions. Recent calculations for the near-term missions indicate that a 200-kg ballistic hopper with CO2/metal rocket engines and a CO2 acquisition unit can perform 10-15 flights on Mars with the total range of 10-15 km, i.e. fulfill the exploration program typically assigned for a rover. Magnesium is currently recognized as a candidate fuel for such engines owing to easy ignition and fast burning in CO2. Aluminum may be more advantageous if a method for reducing its ignition temperature is found. Coating it by nickel is one such method. It is known that a thin nickel layer of nickel on the surface of aluminum particles can prevent their agglomeration and simultaneously facilitate their ignition, thus increasing the efficiency of aluminized propellants.

The effect of walking and vitamin B supplementation on quality of life in community-dwelling adults with mild cognitive impairment: a randomized, controlled trial

PubMed Central

van Uffelen, Jannique G. Z.; Hopman-Rock, Marijke; van Mechelen, Willem

2007-01-01

Objectives To examine the effect of walking and vitamin B supplementation on quality-of-life (QoL) in community-dwelling adults with mild cognitive impairment. Methods One year, double-blind, placebo-controlled trial. Participants were randomized to: (1) twice-weekly, group-based, moderate-intensity walking program (n = 77) or a light-intensity placebo activity program (n = 75); and (2) daily vitamin B pills containing 5 mg folic acid, 0.4 mg B12, 50 mg B6 (n = 78) or placebo pills (n = 74). QoL was measured at baseline, after six and 12 months using the population-specific Dementia Quality-of-Life (D-QoL) to assess overall QoL and the generic Short-Form 12 mental and physical component scales (SF12-MCS and SF12-PCS) to assess health-related QoL. Results Baseline levels of QoL were relatively high. Modified intention-to-treat analyses revealed no positive main intervention effect of walking or vitamin supplementation. In both men and women, ratings of D-QoL-belonging and D-QoL-positive affect subscales improved with 0.003 (P = 0.04) and 0.002 points (P = 0.06) with each percent increase in attendance to the walking program. Only in men, SF12-MCS increased with 0.03 points with each percent increase in attendance (P = 0.08). Conclusion Several small but significant improvements in QoL were observed with increasing attendance to the walking program. No effect of vitamin B supplementation was observed. Trial Registration International Standard Randomized Controlled Trial Number Register, 19227688, http://www.controlled-trials.com/isrctn/. PMID:17616840

Carbon and nutrient removal from on-site wastewater using extended-aeration activated sludge and ion exchange.

PubMed

Safferman, Steven I; Burks, Bennette D; Parker, Robert A

2004-01-01

The need to improve on-site wastewater treatment processes is being realized as populations move into more environmentally sensitive regions and regulators adopt the total maximum daily load approach to watershed management. Under many conditions, septic systems do not provide adequate treatment; therefore, advanced systems are required. These systems must remove significant amounts of biochemical oxygen demand (BOD) and suspended solids, and substantially nitrify, denitrify, and remove phosphorus. Many existing advanced on-site wastewater systems effectively remove BOD, suspended solids, and ammonia, but few substantially denitrify and uptake phosphorus. The purpose of this research was to design and test modifications to an existing on-site wastewater treatment system to improve denitrification and phosphorus removal. The Nayadic (Consolidated Treatment Systems, Inc., Franklin, Ohio), an established, commercially available, extended-aeration, activated sludge process, was used to represent a typical existing system. Several modifications were considered based on a literature review, and the option with the best potential was tested. To improve denitrification, a supplemental treatment tank was installed before the Nayadic and a combination flow splitter, sump, and pump box with a recirculation system was installed after it. A recirculation pump returned a high proportion of the system effluent back to the supplemental treatment tank. Two supplemental treatment tank sizes, three flowrates, and three recirculation rates were tested. Actual wastewater was dosed as brief slugs to the system in accordance with a set schedule. Several ion-exchange resins housed in a contact column were tested on the effluent for their potential to remove phosphorus. Low effluent levels of five-day biochemical oxygen demand, suspended solids, and total nitrogen were achieved and substantial phosphorous removal was also achieved using a 3780-L supplemental treatment tank, a recirculation ratio of 5:1, and a fine-grain activated aluminum-oxide-exchange media. Good results were also obtained with an 1890-L supplemental treatment tank and a recirculation ratio of 3:1. The most significant benefit of the supplemental treatment tank, in combination with the recirculation system, appears to be the low nitrogen concentration dosed to the Nayadic. By reducing the nitrogen concentration and spreading out its mass over time during no-flow periods, the Nayadic's inherent low-level denitrifying capacity was more closely matched and effective treatment was achieved.

Aluminum-based metal-air batteries

DOEpatents

Friesen, Cody A.; Martinez, Jose Antonio Bautista

2016-01-12

Provided in one embodiment is an electrochemical cell, comprising: (i) a plurality of electrodes, comprising a fuel electrode that comprises aluminum and an air electrode that absorbs gaseous oxygen, the electrodes being operable in a discharge mode wherein the aluminum is oxidized at the fuel electrode and oxygen is reduced at the air electrode, and (ii) an ionically conductive medium, comprising an organic solvent; wherein during non-use of the cell, the organic solvent promotes formation of a protective interface between the aluminum of the fuel electrode and the ionically conductive medium, and wherein at an onset of the discharge mode, at least some of the protective interface is removed from the aluminum to thereafter permit oxidation of the aluminum during the discharge mode.

Space Research Fortifies Nutrition Worldwide

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's Controlled Ecological Life Support Systems program attempted to address basic needs of crews, meet stringent payload and power usage restrictions, and minimize space occupancy, by developing living, regenerative ecosystems that would take care of themselves and their inhabitants. An experiment from this program evolved into one of the most widespread NASA spinoffs of all time-a method for manufacturing an algae-based food supplement that provides the nutrients previously only available in breast milk. Martek Biosciences Corporation, in Columbia, Maryland, now manufactures this supplement, and it can be found in over 90 percent of the infant formulas sold in the United States, as well as those sold in over 65 other countries. With such widespread use, the company estimates that over 24 million babies worldwide have consumed its nutritional additives.

Filler Wire Development for 2195 Aluminum-Lithium

NASA Technical Reports Server (NTRS)

Bjorkman, Gerry; Cho, Alex; Russell, Carolyn; Zimmerman, Frank

1998-01-01

The presentation outline summarizes activities supporting the development of filler wire for 215 aluminum-lithium. The specific objective of the research was to identify an Al-Cu based filler wire chemistry which reduces weld susceptibility in 2195 Aluminum-Lithium welds and repairs welds along with providing adequate mechanical properties. This report is in viewgraph form.

34 CFR 200.45 - Supplemental educational services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Improving Basic Programs Operated by Local Educational Agencies Lea and School Improvement § 200.45 Supplemental educational services. (a) Definition. “Supplemental educational services” means tutoring and other...

The Solubility of Aluminum in Cryolite-Based Electrolyte-Containing KF

NASA Astrophysics Data System (ADS)

Zhang, Yu; Yu, Jiangyu; Gao, Bingliang; Liu, Yibai; Hu, Xianwei; Shi, Zhongning; Wang, Zhaowen

2016-04-01

The solubility of aluminum in NaF-AlF3-CaF2-KF-A12O3 electrolyte system at 1253 K (980 °C) has been measured by the analysis of quenched samples saturated with aluminum. The content of the dissolved metal in the quenched melt was determined by collecting the volume of hydrogen gas when a finely crushed sample is treated with HCl. Addition of 0 to 5 pct KF has no obvious effect on the solubility of aluminum in cryolite-based melts with molar ratio of NaF/AlF3 (cryolite ratio) ranging from 2.2 to 3.0. The solubility of aluminum increases from 0.015 to 0.026 wt pct with cryolite ratio increases from 2.2 to 4.0 in the NaF-AlF3-5 wt pct CaF2-3 wt pct A12O3 electrolyte at 1253 K (980 °C). Aluminum solubility was affected by both chemical replacement reaction of Al + 3NaF = AlF3 + 3Na and physical dissolution.

Fatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints

PubMed Central

Sillapasa, Kittima; Mutoh, Yoshiharu; Miyashita, Yukio; Seo, Nobushiro

2017-01-01

Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that fatigue fracture of the FSW joint plate specimen occurred at the location of the lowest local fatigue strength as well as the lowest hardness, regardless of microstructural evolution. To estimate the fatigue strengths of aluminum alloy FSW joints from the hardness measurements, the relationship between fatigue strength and hardness for aluminum alloys was investigated based on the present experimental results and the available wide range of data from the references. It was found as: σa (R = −1) = 1.68 HV (σa is in MPa and HV has no unit). It was also confirmed that the estimated fatigue strengths were in good agreement with the experimental results for aluminum alloy FSW joints. PMID:28772543

Fatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints.

PubMed

Sillapasa, Kittima; Mutoh, Yoshiharu; Miyashita, Yukio; Seo, Nobushiro

2017-02-15

Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that fatigue fracture of the FSW joint plate specimen occurred at the location of the lowest local fatigue strength as well as the lowest hardness, regardless of microstructural evolution. To estimate the fatigue strengths of aluminum alloy FSW joints from the hardness measurements, the relationship between fatigue strength and hardness for aluminum alloys was investigated based on the present experimental results and the available wide range of data from the references. It was found as: σ a ( R = -1) = 1.68 HV ( σ a is in MPa and HV has no unit). It was also confirmed that the estimated fatigue strengths were in good agreement with the experimental results for aluminum alloy FSW joints.

Lipopolysaccharide Analogs Improve Efficacy of Acellular Pertussis Vaccine and Reduce Type I Hypersensitivity in Mice▿

PubMed Central

Geurtsen, Jeroen; Banus, H. Alexander; Gremmer, Eric R.; Ferguson, Henke; de la Fonteyne-Blankestijn, Liset J. J.; Vermeulen, Jolanda P.; Dormans, Jan A. M. A.; Tommassen, Jan; van der Ley, Peter; Mooi, Frits R.; Vandebriel, Rob J.

2007-01-01

Pertussis is an infectious disease of the respiratory tract that is caused by the gram-negative bacterium Bordetella pertussis. Although acellular pertussis (aP) vaccines are safe, they are not fully effective and thus require improvement. In contrast to whole-cell pertussis (wP) vaccines, aP vaccines do not contain lipopolysaccharide (LPS). Monophosphoryl lipid A (MPL) and Neisseria meningitidis LpxL2 LPS have been shown to display immune-stimulating activity while exerting little endotoxin activity. Therefore, we evaluated whether these LPS analogs could increase the efficacy of the aP vaccine. Mice were vaccinated with diphtheria-tetanus-aP vaccine with aluminum, MPL, or LpxL2 LPS adjuvant before intranasal challenge with B. pertussis. Compared to vaccination with the aluminum adjuvant, vaccination with either LPS analog resulted in lower colonization and a higher pertussis toxin-specific serum immunoglobulin G level, indicating increased efficacy. Vaccination with either LPS analog resulted in reduced lung eosinophilia, reduced eosinophil numbers in the bronchoalveolar lavage fluid, and the ex vivo production of interleukin-4 (IL-4) by bronchial lymph node cells and IL-5 by spleen cells, suggesting reduced type I hypersensitivity. Vaccination with either LPS analog increased serum IL-6 levels, although these levels remained well below the level induced by wP, suggesting that supplementation with LPS analogs may induce some reactogenicity but reactogenicity considerably less than that induced by the wP vaccine. In conclusion, these results indicate that supplementation with LPS analogs forms a promising strategy that can be used to improve aP vaccines. PMID:17494641

Plasma folate levels in early to mid pregnancy after a nation-wide folic acid supplementation program in areas with high and low prevalence of neural tube defects in China.

PubMed

Liu, Jufen; Gao, Lili; Zhang, Yali; Jin, Lei; Li, Zhiwen; Zhang, Le; Meng, Qinqin; Ye, Rongwei; Wang, Linlin; Ren, Aiguo

2015-06-01

Folic acid supplementation is recommended for all women of child-bearing age to prevent neural tube defects (NTDs). A nation-wide folic acid supplementation program was implemented in rural areas of China since 2009; however, changes in plasma folate levels in pregnant women were unknown. A cross-sectional survey was conducted in 2011 to 2012, with 1736 pregnant women enrolled, and results were compared with a previous survey in 2002 to 2004. A microbiological method was used to determine plasma folate levels. Preprogram and postprogram median plasma folate concentrations were compared while stratified by prevalence of NTDs and residence. In the high NTD prevalence population, plasma folate concentration increased to 33.4 (18.7, 58.4) nmol/L in the postprogram sample, which is 2.9 times of the preprogram. In the low NTD prevalence population, plasma folate increased to 67.9 (44.5, 101.9) nmol/L, which is 1.9 times of the preprogram. Gaps remained in plasma folate levels with respect to prevalence of NTDs and residence. Folic acid supplementation has a strong impact on plasma folate concentrations. Earlier supplementation (before the last menstrual period), increased supplementation frequency and more total days of supplementation were associated with a higher plasma folate concentration as demonstrated in both the high- and low-prevalence populations. Plasma folate levels among pregnant Chinese women increased dramatically after the nation-wide folic acid supplementation program in both rural and urban areas, and in populations of high and low NTD prevalence. The nation-wide program should have a component to ensure that supplementation begins before pregnancy. © 2015 Wiley Periodicals, Inc.

Role of deferoxamine on enzymatic stress markers in an animal model of Alzheimer's disease after chronic aluminum exposure.

PubMed

Esparza, José L; Garcia, Tania; Gómez, Mercedes; Nogués, M Rosa; Giralt, Montserrat; Domingo, José L

2011-06-01

The effect of the chelator deferoxamine (DFO) on the activity of enzymatic stress markers was assessed in amyloid beta peptide (AβPP) transgenic mice, an animal model of Alzheimer's disease, after oral aluminum (Al) exposure for 6 months. AβPP transgenic (Tg2576) and C57BL6/SJL wild-type mice of 5 months of age were fed a diet supplemented with Al lactate (1 mg of Al/g food). Four groups of Tg2576 and wild-type animals were used: control, Al only, DFO only, and Al plus DFO. Mice in the DFO-treated groups received also subcutaneous injections of 0.20 mmol/kg/d of this chelating agent twice a week until the end of the study at 11 months of age. The hippocampus, cerebellum, and cortex were removed and processed to examine a number of oxidative stress markers. Furthermore, the expression of Cu-Zn superoxide dismutase, glutathione reductase, and catalase was evaluated by quantitative reverse transcriptase polymerase chain reaction analysis. Aluminum levels in the hippocampus of Tg2576 mice were higher than those found in cerebellum and cortex, while the main oxidative effects were evidenced in the presence of DFO only. Oral Al exposure of AβPP transgenic mice would have some potential to promote pro-oxidant events, while DFO administration would not help in preventing these deleterious effects.

Aluminum Carbothermic Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruno, Marshall J.

2005-03-31

This report documents the non-proprietary research and development conducted on the Aluminum Carbothermic Technology (ACT) project from contract inception on July 01, 2000 to termination on December 31, 2004. The objectives of the program were to demonstrate the technical and economic feasibility of a new carbothermic process for producing commercial grade aluminum, designated as the ''Advanced Reactor Process'' (ARP). The scope of the program ranged from fundamental research through small scale laboratory experiments (65 kW power input) to larger scale test modules at up to 1600 kW power input. The tasks included work on four components of the process, Stagesmore » 1 and 2 of the reactor, vapor recovery and metal alloy decarbonization; development of computer models; and economic analyses of capital and operating costs. Justification for developing a new, carbothermic route to aluminum production is defined by the potential benefits in reduced energy, lower costs and more favorable environmental characteristics than the conventional Hall-Heroult process presently used by the industry. The estimated metrics for these advantages include energy rates at approximately 10 kWh/kg Al (versus over 13 kWh/kg Al for Hall-Heroult), capital costs as low as $1250 per MTY (versus 4,000 per MTY for Hall-Heroult), operating cost reductions of over 10%, and up to 37% reduction in CO2 emissions for fossil-fuel power plants. Realization of these benefits would be critical to sustaining the US aluminum industries position as a global leader in primary aluminum production. One very attractive incentive for ARP is its perceived ability to cost effectively produce metal over a range of smelter sizes, not feasible for Hall-Heroult plants which must be large, 240,000 TPY or more, to be economical. Lower capacity stand alone carbothermic smelters could be utilized to supply molten metal at fabrication facilities similar to the mini-mill concept employed by the steel industry. Major accomplishments for the program include definition of the system thermo-chemistry, demonstration of reactor stage 1, development of reactor stage 2 critical components in a 500 kW module, experimental determination of the vapor recovery reactor fundamentals, detailed design and installation of an advanced stage 1/vapor recovery reactor, feasibility of efficient separation of Al-C metal alloy product, updated capital and operating cost estimates, and development of computer models for all steps of the Advanced Reactor Process.« less

Evaluation of Supplemental Nutrition Assistance Program Education: Application of Behavioral Theory and Survey Validation

ERIC Educational Resources Information Center

Wyker, Brett A.; Jordan, Patricia; Quigley, Danielle L.

2012-01-01

Objective: Application of the Transtheoretical Model (TTM) to Supplemental Nutrition Assistance Program Education (SNAP-Ed) evaluation and development and validation of an evaluation tool used to measure TTM constructs is described. Methods: Surveys were collected from parents of children receiving food at Summer Food Service Program sites prior…

75 FR 5877 - Commodity Supplemental Food Program (CSFP): Amendment Removing Priority Given to Women, Infants...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... Supplemental Food Program (CSFP): Amendment Removing Priority Given to Women, Infants, and Children Before the... removing the priority given to women, infants, and children before the elderly in program participation, in... CSFP if funds were available after all women, infants, and children were first served. Section 4221 of...

The Transformation of the Supplemental Nutrition Assistance Program

ERIC Educational Resources Information Center

Klerman, Jacob Alex; Danielson, Caroline

2011-01-01

Between 2000 and 2005, the Supplemental Nutrition Assistance Program (SNAP, until recently, the Food Stamp Program) caseload increased by half. As the Great Recession unfolded, the SNAP caseload grew even more rapidly. Further, over the past two decades the composition of the caseload has shifted sharply away from families combining food and cash…

HILTOP supplement: Heliocentric interplanetary low thrust trajectory optimization program, supplement 1

NASA Technical Reports Server (NTRS)

Mann, F. I.; Horsewood, J. L.

1974-01-01

Modifications and improvements are described that were made to the HILTOP electric propulsion trajectory optimization computer program during calendar years 1973 and 1974. New program features include the simulation of power degradation, housekeeping power, launch asymptote declination optimization, and powered and unpowered ballistic multiple swingby missions with an optional deep space burn.

Adding EUV reflectance to aluminum-coated mirrors for space-based observation

NASA Astrophysics Data System (ADS)

Allred, David D.; Turley, R. Steven; Thomas, Stephanie M.; Willett, Spencer G.; Greenburg, Michael J.; Perry, Spencer B.

2017-09-01

Protective layers on aluminum mirror surfaces which can be removed via the use of atomic hydrogen or hydrogen plasmas at the point of use in space may allow an expansion of broad-band mirrors into the EUV. LUVOIR (large, UV-optical-IR telescope) is a potential NASA flagship space-based observatory of the 2020's or 30's. It would utilize the largest mirrors ever flown1 . Their reflective coating will almost certainly be aluminum, since such telescopes would profit from truly broad-band mirrors. To achieve reflectance over the broadest band, the top surface of such aluminum mirrors, however, needs to be bare, without the oxide layers that naturally form in air. This will open the 11 to 15 eV band. Since thin aluminum films are largely transparent between 15 and 70 eV an EUV mirror under the aluminum could make EUV bands such as 30.4 nm available for space-based astrophysics without sacrificing mirror IR, visible and UV reflectance. The local space environment for the observatory is sufficiently oxygen-free that the surface should remain bare for decades. We discuss protecting as-deposited aluminum mirrors with robust, oxygenimpenetrable, barrier layers applied in vacuo to the aluminum immediately after deposition and before air contact. The goal is that the barrier could also be cleanly, and relatively easily, removed once the mirror is in space. We propose hydrogen atoms as the means for removing the overcoat, since they can be expected to meet the criteria that the means is gentle enough to not roughen the mirror surface, and does not redeposit material on the mirror or other spacecraft components. We have investigated both organic and inorganic (such as, a-Si) hydrogen-removable films that can be applied to the aluminum immediately after its deposition have been investigated. We also examined the REVAP technique, using Cd and Zn. Agglomeration limited their effectiveness as barrier layers. That and dealing with the reevaporated atoms may limit their utility as barrier materials.

Analysis and Countermeasures of Wind Power Accommodation by Aluminum Electrolysis Pot-Lines in China

NASA Astrophysics Data System (ADS)

Zhang, Hongliang; Ran, Ling; He, Guixiong; Wang, Zhenyu; Li, Jie

2017-10-01

The unit energy consumption and its price have become the main obstacles for the future development of the aluminum electrolysis industry in China. Meanwhile, wind power is widely being abandoned because of its instability. In this study, a novel idea for wind power accommodation is proposed to achieve a win-win situation: the idea is for nearby aluminum electrolysis plants to absorb the wind power. The features of the wind power distribution and aluminum electrolysis industry are first summarized, and the concept of wind power accommodation by the aluminum industry is introduced. Then, based on the characteristics of aluminum reduction cells, the key problems, including the bus-bar status, thermal balance, and magnetohydrodynamics instabilities, are analyzed. In addition, a whole accommodation implementation plan for wind power by aluminum reduction is introduced to explain the theoretical value of accommodation, evaluation of the reduction cells, and the industrial experiment scheme. A numerical simulation of a typical scenario proves that there is large accommodation potential for the aluminum reduction cells. Aluminum electrolysis can accommodate wind power and remain stable under the proper technique and accommodation scheme, which will provide promising benefits for the aluminum plant and the wind energy plant.

75 FR 55745 - Corrosion-Resistant Carbon Steel Flat Products From the Republic of Korea: Preliminary Results...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-14

... with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based... medium-sized company, or any large company that is not included in the five largest conglomerates based... property tax based on the location of its manufacturing facilities, Suncheon Works, in the Yulchon...

Thermodynamic Analysis for the Refining Ability of Salt Flux for Aluminum Recycling

PubMed Central

Hiraki, Takehito; Miki, Takahiro; Nakajima, Kenichi; Matsubae, Kazuyo; Nakamura, Shinichiro; Nagasaka, Tetsuya

2014-01-01

The removability of impurities during the aluminum remelting process by oxidation was previously investigated by our research group. In the present work, alternative impurity removal with chlorination has been evaluated by thermodynamic analysis. For 43 different elements, equilibrium distribution ratios among metal, chloride flux and oxide slag phases in the aluminum remelting process were calculated by assuming the binary systems of aluminum and an impurity element. It was found that the removability of impurities isn’t significantly affected by process parameters such as chloride partial pressure, temperature and flux composition. It was shown that Ho, Dy, Li, La, Mg, Gd, Ce, Yb, Ca and Sr can be potentially eliminated into flux by chlorination from the remelted aluminum. Chlorination and oxidation are not effective to remove other impurities from the melting aluminum, due to the limited parameters which can be controlled during the remelting process. It follows that a proper management of aluminum scrap such as sorting based on the composition of the products is important for sustainable aluminum recycling. PMID:28788144

Spin Forming Aluminum Crew Module (CM) Metallic Aft Pressure Vessel Bulkhead (APVBH) - Phase II

NASA Technical Reports Server (NTRS)

Hoffman, Eric K.; Domack, Marcia S.; Torres, Pablo D.; McGill, Preston B.; Tayon, Wesley A.; Bennett, Jay E.; Murphy, Joseph T.

2015-01-01

The principal focus of this project was to assist the Multi-Purpose Crew Vehicle (MPCV) Program in developing a spin forming fabrication process for manufacture of the Orion crew module (CM) aft pressure vessel bulkhead. The spin forming process will enable a single piece aluminum (Al) alloy 2219 aft bulkhead resulting in the elimination of the current multiple piece welded construction, simplify CM fabrication, and lead to an enhanced design. Phase I (NASA TM-2014-218163 (1)) of this assessment explored spin forming the single-piece CM forward pressure vessel bulkhead. The Orion MPCV Program and Lockheed Martin (LM) recently made two critical decisions relative to the NESC Phase I work scope: (1) LM selected the spin forming process to manufacture a single-piece aft bulkhead for the Orion CM, and (2) the aft bulkhead will be manufactured from Al 2219. Based on the Program's new emphasis related to the spin forming process, the NESC was asked to conduct a Phase II assessment to assist in the LM manufacture of the aft bulkhead and to conduct a feasibility study into spin forming the Orion CM cone. This activity was approved on June 19, 2013. Dr. Robert Piascik, NASA Technical Fellow for Materials at the Langley Research Center (LaRC), was selected to lead this assessment. The project plan was approved by the NASA Engineering and Safety Center (NESC) Review Board (NRB) on July 18, 2013. The primary stakeholders for this assessment were the NASA and LM MPCV Program offices. Additional benefactors are commercial launch providers developing CM concepts.

Spin Forming Aluminum Crew Module (CM) Metallic Aft Pressure Vessel Bulkhead (APVBH) - Phase II

NASA Technical Reports Server (NTRS)

Hoffman, Eric K.; Domack, Marcia S.; Torres, Pablo D.; McGill, Preston B.; Tayon, Wesley A.; Bennett, Jay E.; Murphy, Joseph T.

2015-01-01

The principal focus of this project was to assist the Multi-Purpose Crew Vehicle (MPCV) program in developing a spin forming fabrication process for manufacture of the Orion crew module (CM) aft pressure vessel bulkhead. The spin forming process will enable a single piece aluminum (Al) alloy 2219 aft bulkhead resulting in the elimination of the current multiple piece welded construction, simplify CM fabrication, and lead to an enhanced design. Phase I (NASA TM-2014-218163, (1)) of this assessment explored spin forming the single-piece CM forward pressure vessel bulkhead. The MPCV Program and Lockheed Martin (LM) recently made two critical decisions relative to the NESC Phase I work scope: (1) LM selected the spin forming process to manufacture a singlepiece aft bulkhead for the Orion CM, and (2) the aft bulkhead will be manufactured from Al 2219. Based on the Program's new emphasis related to the spin forming process, the NESC was asked to conduct a Phase II assessment to assist in the LM manufacture of the aft bulkhead and to conduct a feasibility study into spin forming the Orion CM cone. This activity was approved on June 19, 2013. Dr. Robert Piascik, NASA Technical Fellow for Materials at the Langley Research Center (LaRC), was selected to lead this assessment. The project plan was approved by the NASA Engineering and Safety Center (NESC) Review Board (NRB) on July 18, 2013. The primary stakeholders for this assessment are the NASA and LM MPCV Program offices. Additional benefactors are commercial launch providers developing CM concepts.

South Carolina State Program for Library Development, 1975-1980. The Third Supplement to the 1972-1977 Program (FY 76 Amendments).

ERIC Educational Resources Information Center

South Carolina State Library, Columbia.

Goals and objectives for library services, 1975-1980, are presented by the South Carolina Advisory Council on Libraries as a supplement to the original South Carolina State Program for Library Development, 1972-1977. Goals for the state library are in the areas of financial support, reference and interlibrary loan service, centralized programs,…

77 FR 48123 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... number. Food and Nutrition Service Title: Status of Claims Against Households. OMB Control Number: 0584...) and appropriate Supplemental Nutrition Assistance Program regulation are the bases for the information... Information: The Food and Nutrition Service (FNS) will collect information on the outstanding aggregate claim...

Polymer gel electrolytes for application in aluminum deposition and rechargeable aluminum ion batteries

DOE PAGES

Sun, Xiao -Guang; Fang, Youxing; Jiang, Xueguang; ...

2015-10-22

Polymer gel electrolyte using AlCl3 complexed acrylamide as functional monomer and ionic liquids based on acidic mixture of 1-ethyl-3-methylimidazolium chloride (EMImCl) and AlCl 3 as plasticizer has been successfully prepared for the first time by free radical polymerization. Aluminum deposition is successfully obtained with a polymer gel membrane contianing 80 wt% ionic liquid. As a result, the polymer gel membranes are also good candidates for rechargeable aluminum ion batteries.

Filler wire for aluminum alloys and method of welding

NASA Technical Reports Server (NTRS)

Bjorkman, Jr., Gerald W. O. (Inventor); Cho, Alex (Inventor); Russell, Carolyn K. (Inventor)

2003-01-01

A weld filler wire chemistry has been developed for fusion welding 2195 aluminum-lithium. The weld filler wire chemistry is an aluminum-copper based alloy containing high additions of titanium and zirconium. The additions of titanium and zirconium reduce the crack susceptibility of aluminum alloy welds while producing good weld mechanical properties. The addition of silver further improves the weld properties of the weld filler wire. The reduced weld crack susceptibility enhances the repair weldability, including when planishing is required.

Fast-Acting Rubber-To-Coated-Aluminum Adhesive

NASA Technical Reports Server (NTRS)

Comer, Dawn A.; Novak, Howard; Vazquez, Mark

1991-01-01

Cyanoacrylate adhesive used to join rubber to coated aluminum easier to apply and more effective. One-part material applied in single coat to aluminum treated previously with epoxy primer and top coat. Parts mated as soon as adhesive applied; no drying necessary. Sets in 5 minutes. Optionally, accelerator brushed onto aluminum to reduce setting time to 30 seconds. Clamping parts together unnecessary. Adhesive comes in four formulations, all based on ethyl cyanoacrylate with various amounts of ethylene copolymer rubber, poly(methyl methacrylate), silicon dioxide, hydroquinone, and phthalic anhydride.

A Feasibility Experiment for a Soft X-Ray Laser

DTIC Science & Technology

1976-09-01

has embarked on a large scale laser fusion program initially aimed at achieving sufficient thermometric yield from a single pellet to initiate a...gold, aluminum ). The report suggests that 10 to 20 percent of the incident laser energy can be converted to X rays below 1 keV. A Lawrence Livermore...Computa- tions of the population inversion for the inner shell electrons, as found in 3 I-.--I~ . . AFWL-TR-76-107 aluminum , indicate a favorable

First results obtained within the European 'LAMA' programme (Large Active Mirrors in Aluminium)

NASA Astrophysics Data System (ADS)

Rozelot, J.-P.

1993-11-01

To investigate the feasibility of large size aluminum mirrors, studies have been undertaken in cooperation with European Southern Observatory (ESO), in the framework of a European program. The first phase, which is just now ended, addressed the following items: (1) tests to select the best aluminum alloy, (2) aluminum welding, homogeneity and stability, (3) aluminum high-precision machining, (4) nickel coating, (5) polishing of the nickel layer, (6) active optics. Furthermore, tests have been conducted to demonstrate that the quality of the mirrors is not altered at various temperatures and after a large number of aluminizing and cleaning cycles (corresponding to about 50 years' life). The mirror shape (whose specifications are fully compliant with those of the Very Large Telescope (VLT), as the program is conducted in cooperation with ESO) was computed under several causes of deformations: evidencing gravity as the predominant effect, and very low distortions as the high thermal conductivity limits the thermal transverse gradient to 0.025 C. Results show that it is quite possible to obtain high optical quality mirrors, mainly due to recent progress both in metallurgical processes (high precision machining -7 microns rms-) and active optics, that permit to correct residual aberrations of the surface. Such an alternative to classical glass mirrors will presently stand as a safe, economical solution that saves manufacturing time, for monolithic or segmented mirrors for innovative telescopes (e.g., lunar interferometric network).

Progress in developing analytical and label-based dietary supplement databases at the NIH Office of Dietary Supplements

PubMed Central

Dwyer, Johanna T.; Picciano, Mary Frances; Betz, Joseph M.; Fisher, Kenneth D.; Saldanha, Leila G.; Yetley, Elizabeth A.; Coates, Paul M.; Milner, John A.; Whitted, Jackie; Burt, Vicki; Radimer, Kathy; Wilger, Jaimie; Sharpless, Katherine E.; Holden, Joanne M.; Andrews, Karen; Roseland, Janet; Zhao, Cuiwei; Schweitzer, Amy; Harnly, James; Wolf, Wayne R.; Perry, Charles R.

2013-01-01

Although an estimated 50% of adults in the United States consume dietary supplements, analytically substantiated data on their bioactive constituents are sparse. Several programs funded by the Office of Dietary Supplements (ODS) at the National Institutes of Health enhance dietary supplement database development and help to better describe the quantitative and qualitative contributions of dietary supplements to total dietary intakes. ODS, in collaboration with the United States Department of Agriculture, is developing a Dietary Supplement Ingredient Database (DSID) verified by chemical analysis. The products chosen initially for analytical verification are adult multivitamin-mineral supplements (MVMs). These products are widely used, analytical methods are available for determining key constituents, and a certified reference material is in development. Also MVMs have no standard scientific, regulatory, or marketplace definitions and have widely varying compositions, characteristics, and bioavailability. Furthermore, the extent to which actual amounts of vitamins and minerals in a product deviate from label values is not known. Ultimately, DSID will prove useful to professionals in permitting more accurate estimation of the contribution of dietary supplements to total dietary intakes of nutrients and better evaluation of the role of dietary supplements in promoting health and well-being. ODS is also collaborating with the National Center for Health Statistics to enhance the National Health and Nutrition Examination Survey dietary supplement label database. The newest ODS effort explores the feasibility and practicality of developing a database of all dietary supplement labels marketed in the US. This article describes these and supporting projects. PMID:25346570

Analysis of “Favorable Growth Element” Based on Rare Earth-aluminum Composite Mechanism of Compound Process

NASA Astrophysics Data System (ADS)

Hao, Baohong; Zeng, Qihui; Zhao, Jin

2018-01-01

Under the background that failure resulted in by high temperature once only aluminum oxide is used as the gasoline additive. This paper, with the purpose to solve this problem, is to synthesize AcAl oxide for gasoline additive. In order to get the rare-earth-aluminum oxide, first, a complex model of rare earth oxide based on theories about ion coordination is established. Then, by the complex model, the type of “compound growth unit” when rare earth elements join the hydrothermal conditions and the inclination that “diversification” might probably happen are deduced. Depending on the results got by complex model, this paper introduces the type of compound and its existence conditions of “Compound growth unit” owned by stable rare-earth-aluminum oxide. By adjusting the compositions of modifier, compound materials of rare earth-aluminum oxide used for gasoline additive is made. By XRD test, aperture test, adsorption test and desorption test, the theoretical deduction is proved to be right. From the experiment, it is concluded that: a dense environment is the pre-condition to form rare-earth-aluminum polymer, which is also an essential condition for the polymer to update to a favorable growth unit and produce mesoporous rare-earth-aluminum oxide with high activity.

Dissolution mechanism of aluminum hydroxides in acid media

NASA Astrophysics Data System (ADS)

Lainer, Yu. A.; Gorichev, I. G.; Tuzhilin, A. S.; Gololobova, E. G.

2008-08-01

The effects of the concentration, temperature, and potential at the hydroxide/electrolyte interface on the aluminum hydroxide dissolution in sulfuric, hydrochloric, and perchloric acids are studied. The limiting stage of the aluminum hydroxide dissolution in the acids is found to be the transition of the complexes that form on the aluminum hydroxide surface from the solid phase into the solution. The results of the calculation of the acid-base equilibrium constants at the oxide (hydroxide)/solution interface using the experimental data on the potentiometric titration of Al2O3 and AlOOH suspensions are analyzed. A mechanism is proposed for the dissolution of aluminum hydroxides in acid media.

Low oxidation state aluminum-containing cluster anions: Cp{sup ∗}Al{sub n}H{sup −}, n = 1–3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xinxing; Ganteför, Gerd; Bowen, Kit, E-mail: AKandalam@wcupa.edu, E-mail: kbowen@jhu.edu

Three new, low oxidation state, aluminum-containing cluster anions, Cp*Al{sub n}H{sup −}, n = 1–3, were prepared via reactions between aluminum hydride cluster anions, Al{sub n}H{sub m}{sup −}, and Cp*H ligands. These were characterized by mass spectrometry, anion photoelectron spectroscopy, and density functional theory based calculations. Agreement between the experimentally and theoretically determined vertical detachment energies and adiabatic detachment energies validated the computed geometrical structures. Reactions between aluminum hydride cluster anions and ligands provide a new avenue for discovering low oxidation state, ligated aluminum clusters.

High-strength laser welding of aluminum-lithium scandium-doped alloys

NASA Astrophysics Data System (ADS)

Malikov, A. G.; Ivanova, M. Yu.

2016-11-01

The work presents the experimental investigation of laser welding of an aluminum alloy (system Al-Mg-Li) and aluminum alloy (system Al-Cu-Li) doped with Sc. The influence of nano-structuring of the surface layer welded joint by cold plastic deformation on the strength properties of the welded joint is determined. It is founded that, regarding the deformation degree over the thickness, the varying value of the welded joint strength is different for these aluminum alloys. The strength of the plastically deformed welded joint, aluminum alloys of the Al-Mg-Li and Al-Cu-Li systems reached 0.95 and 0.6 of the base alloy strength, respectively.

76 FR 16598 - Agency Information Collection Activities: Proposed Collection; Comment Request-Supplemental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... DEPARTMENT OF AGRICULTURE Food and Nutrition Service Agency Information Collection Activities: Proposed Collection; Comment Request--Supplemental Nutrition Assistance Program Repayment Demand and Program Disqualification AGENCY: Food and Nutrition Service, USDA. ACTION: Notice. SUMMARY: In accordance...

Metallic glass coating on metals plate by adjusted explosive welding technique

NASA Astrophysics Data System (ADS)

Liu, W. D.; Liu, K. X.; Chen, Q. Y.; Wang, J. T.; Yan, H. H.; Li, X. J.

2009-09-01

Using an adjusted explosive welding technique, an aluminum plate has been coated by a Fe-based metallic glass foil in this work. Scanning electronic micrographs reveal a defect-free metallurgical bonding between the Fe-based metallic glass foil and the aluminum plate. Experimental evidence indicates that the Fe-based metallic glass foil almost retains its amorphous state and mechanical properties after the explosive welding process. Additionally, the detailed explosive welding process has been simulated by a self-developed hydro-code and the bonding mechanism has been investigated by numerical analysis. The successful welding between the Fe-based metallic glass foil and the aluminum plate provides a new way to obtain amorphous coating on general metal substrates.

Advances in the electrodeposition of aluminum from ionic liquid based electrolytes

NASA Astrophysics Data System (ADS)

Leadbetter, Kirt C.

Aluminum plating is of considerable technical and economic interest because it provides an eco-friendly substitute for cadmium coatings used on many military systems. However, cadmium has been determined to be a significant environmental safety and occupational health (ESOH) hazard because of its toxicity and carcinogenic nature. Furthermore, the cost of treating and disposing of generated wastes, which often contain cyanide, is costly and is becoming prohibitive in the face of increasingly stringent regulatory standards. The non-toxic alternative aluminum is equivalent or superior in performance to cadmium. In addition, it could serve to provide an alternative to hexavalent chromium coatings used on military systems for similar reasons to that of cadmium. Aluminum is a beneficial alternative in that it demonstrates self-healing corrosion resistance in the form of a tightly-bound, impervious oxide layer. A successfully plated layer would be serviceable over a wider temperature range, 925 °F for aluminum compared to 450 oF for cadmium. In addition, an aluminum layer can be anodized to make it non-conducting and colorable. In consideration of the plating process, aluminum cannot be deposited from aqueous solutions because of its reduction potential. Therefore, nonaqueous electrolytes are required for deposition. Currently, aluminum can be electrodeposited in nonaqueous processes that use hazardous chemicals such as toluene and pyrophoric aluminum alkyls. Electrodeposition from ionic liquids provides the potential for a safer method that could be easily scaled up for industrial application. The plating process could be performed at a lower temperature and higher current density than other commercially available aluminum electrodeposition processes; thus a reduced process cost could be possible. The current ionic liquid based electrolytes are more expensive; however production on a larger scale and a long electrolyte lifetime are associated with a reduction in price. Advancements of this nonaqueous aluminum plating process have the potential to lead to a novel and competitive commercial aluminum deposition process. In this investigation aluminum electrodeposition from ionic liquid based electrolytes onto steel, copper and magnesium substrates without conversion coatings or strike layers was evaluated in six different ionic liquid based electrolytes in two technical setups. Three of which are commercially available aluminum plating electrolytes, three of which, discussed in literature were created on site by research personnel in the laboratory. The three commercially available electrolytes were: 1-Butyl-3-methylimidazolium chloride ([BMIm]Cl) * 1.5 AlCl3 with proprietary additives from IoLiTec, 1-Ethyl-3-methylimidazolium chloride ([EMIm]Cl) * 1.5 AlCl3 with proprietary additives from IoLiTec, and BasionicsTM AL-02, an aluminum plating electrolyte containing [EMIm]Cl * 1.5 AlCl3 with additives from BASF. The three electrolytes created on site were based on the 1-ethyl-3-methylimidazolium chloride ionic liquid with added 1.5 AlCl3 and one with added sodium dodecyl sulfate. Small scale plating tests in a 25-mL plating cell were conducted to provide a comparative analysis of the six different electrolytes considered. From these investigations, two were chosen to be evaluated in a larger 1-liter plating cell; designed and constructed to provide a more realistic evaluation of plating parameters with selected electrolytes to better portray industrial electroplating conditions. The effect of current density (10-40 mA/cm 2), temperature (30-90° Celsius) and plating bath agitation on current efficiency, corrosion resistance by the ASTM B117 method, adhesion, microstructure, and chemical composition (evaluated with energy-dispersive x-ray spectroscopy) of the plated Al-layer was explored in both the 25-mL and 1-L plating cell investigations. In addition development of pre- and post-treatment processes for the metal substrates was attempted. While previous investigations focused on one or two of these topics, this research seeks to investigate all discussed phenomena and characteristics. Additionally, there is little research that reports on the adhesion performance of aluminum coatings from ionic liquids. Also, corrosion investigations are limited to all but a few publications. So too, the deposition of aluminum in a larger, more realistic plating cell has never been thoroughly investigated. This is key if a practical application of the technology is ever to be realized. In sum, correlations were drawn between electrolyte, current density, temperature and bath agitation with quality and characteristic of electrodeposited aluminum layers. The overriding goal to create an acceptably competitive aluminum coating process to replace cadmium and compete with other commercial aluminum deposition processes was not successful. Competitiveness was evaluated as per the discussed characteristics and so also, by a comparison to physical samples created in a more realistic plating cell to AlumiPlate aluminum coatings.

Implementing the adapted physical education E-learning program into physical education teacher education program.

PubMed

Kwon, Eun Hye; Block, Martin E

2017-10-01

According to the Ministry of Education Korea (2014), the approximately 70.4% of all students with disabilities are included in general schools in Korea. However, studies show that Korean GPE teachers do not feel comforatble or prepared to include students with disabilities (Oh & Lee, 1999; Roh, 2002; Roh & Oh, 2005). The purpose of this study was to explore whether an APE e-learning supplement would have an impact on the level of self-efficacy and content knowledge of pre-service teachers related to including students with intellectual disabilities. An APE supplement was developed based on the Instructional Design Model (Dick, Carey, & Carey, 2005) to provide three sources of self-efficacy, mastery experience, vicarious experience, and social persuasions. Three groups of pre-service teachers (N=75) took the same content supplement with different delivery system, E-learning group (n=25) with online, traditional group (n=25) with printed handout, and control group (n=25) without supplement. Two instruments, the Physical Educators' Situation-Specific Self-efficacy and Inclusion Student with Disabilities in Physical Education (SE-PETE-D) and the content knowledge test, were given to all participants twice (i.e., pretest and posttest). A 3×2 mixed effect ANOVA revealed that pre-service teachers' perceived self-efficacy (p=0.023) improved after taking the e-learning supplement. However, there was no significant difference in the level of content knowledge (p=0.248) between the learning group and tranditional group. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aluminum Phosphide Poisoning-Related Deaths in Tehran, Iran, 2006 to 2013

PubMed Central

Etemadi-Aleagha, Afshar; Akhgari, Maryam; Iravani, Fariba Sardari

2015-01-01

Abstract Metal phosphides such as aluminum phosphide are potent insecticides. This highly toxic substance is used for rice and other grains protection in Iran. Due to its high toxicity potential and easy availability, it is widely used as a suicide poison. This substance has no effective antidote and the incidence of deaths due to its poisoning is increasing day by day in Iran. The present study was conducted to show the increasing incidence of fatal aluminum phosphide poisoning and its toxicological and forensic aspects in an 8-year study, 2006 to 2013. Autopsy sheets were reviewed and cases with the history of aluminum phosphide poisoning were selected. Toxicological analysis results, demographic and necroscopic examination findings were studied. A total of 51.8% of studied cases were female. Most of the cases were between 10 and 40 years old. The manner of death was self-poisoning in 85% of cases. Morphine, ethanol, and amitriptyline were the most common additional drugs detected in toxicological analysis. The incidence of fatal aluminum phosphide poisoning cases referred for phosphine analysis was 5.22 and 37.02 per million of population of Tehran in 2006 and 2013, respectively. The results of this study showed that in spite of ban and restrictions, there was a dramatic increase in the incidence of fatal aluminum phosphide poisoning in Tehran from 2006 to 2013. Safety alert should be highlighted in training program for all population groups about the toxic effects of aluminum phosphide tablets. PMID:26402837

Selenium adsorption to aluminum-based water treatment residuals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ippolito, James A.; Scheckel, Kirk G.; Barbarick, Ken A.

2009-09-02

Aluminum-based water treatment residuals (WTR) can adsorb water- and soil-borne P, As(V), As(III), and perchlorate, and may be able to adsorb excess environmental selenium. WTR, clay minerals, and amorphous aluminum hydroxide were shaken for 24 h in selenate or selenite solutions at pH values of 5-9, and then analyzed for selenium content. Selenate and selenite adsorption edges were unaffected across the pH range studied. Selenate adsorbed on to WTR, reference mineral phases, and amorphous aluminum hydroxide occurred as outer sphere complexes (relatively loosely bound), while selenite adsorption was identified as inner-sphere complexation (relatively tightly bound). Selenite sorption to WTR inmore » an anoxic environment reduced Se(IV) to Se(0), and oxidation of Se(0) or Se(IV) appeared irreversible once sorbed to WTR. Al-based WTR could play a favorable role in sequestering excess Se in affected water sources.« less

Cryogenic Tank Technology Program (CTTP)

NASA Technical Reports Server (NTRS)

Vaughn, T. P.

2001-01-01

The objectives of the Cryogenic Tank Technology Program were to: (1) determine the feasibility and cost effectiveness of near net shape hardware; (2) demonstrate near net shape processes by fabricating large scale-flight quality hardware; and (3) advance state of current weld processing technologies for aluminum lithium alloys.

Phenomena after meteoroid penetration of a bumper plate

NASA Technical Reports Server (NTRS)

Todd, F. C.

1972-01-01

The results are presented of a study to obtain a computer program for the penetration of a thin plate of aluminum by a sphere of rock. The study was divided into two projects. One project covers the initial impact, the crushing of the sphere of rock, the break up of the aluminum sheet, and the conversion of the sufficiently shock-compressed regions of rock and aluminum into a plasma. The other project considers the ejection of a cone of plasma with entrained particles from the impact zone, its expansion as it traverses a region of free space, and its impact on a stack of paper sheets. The ablation of fragments in penetrating the stack of paper sheets is also considered.

Upgrading public health programs for human papillomavirus prevention and control is possible in low- and middle-income countries.

PubMed

Steben, Marc; Jeronimo, Jose; Wittet, Scott; Lamontagne, D Scott; Ogilvie, Gina; Jensen, Christina; Smith, Jennifer; Franceschi, Silvia

2012-11-20

Cancer is an important cause of premature death in low- and middle-income countries (LMIC). Two preventive tools are available that have the potential together to sharply decrease the impact of cervical cancer in LMIC. The combination of human papillomavirus (HPV) vaccination and cervical cancer screening within existing programs is possible. Although there is a great deal of concern about introducing and strengthening HPV prevention efforts in LMIC, recent projects have demonstrated feasibility. Thus, with appropriate prioritization and resources, HPV prevention can be introduced and scaled up. Comprehensive HPV prevention strategies, mainly those geared at preventing cervical cancer, should include both vaccination and screening. The integration of both screening and vaccination will save the most lives, and such strategies are endorsed by many international organizations. However, some vaccine and screening programs are financed almost entirely by special externally-based programs. These more closely resemble demonstration exercises than sustainable national programs. In order for successful demonstration projects to have a broad impact on prevention, sustainable national funding based on strong commitments is essential. There may be challenges to implementing HPV prevention programs, but none should be considered insurmountable. Many LMIC have successfully adopted an HPV prevention agenda despite prevailing pessimism. Failure to act on this issue can perpetuate inequity in sexually transmitted infection and cancer prevention. This article forms part of a special supplement entitled "Comprehensive Control of HPV Infections and Related Diseases" Vaccine Volume 30, Supplement 5, 2012. Copyright © 2012. Published by Elsevier Ltd.

Net Shape Spin Formed Cryogenic Aluminum Lithium Cryogenic Tank Domes for Lower Cost Higher Performance Launch Vehicles

NASA Technical Reports Server (NTRS)

Curreri, Peter A.; Hoffman, Eric; Domack, Marcia; Brewster, Jeb; Russell, Carolyn

2013-01-01

With the goal of lower cost (simplified manufacturing and lower part count) and higher performance (higher strength to weight alloys) the NASA Technical Maturation Program in 2006 funded a proposal to investigate spin forming of space launch vehicle cryogenic tank domes. The project funding continued under the NASA Exploration Technology Development Program through completion in FY12. The first phase of the project involved spin forming of eight, 1 meter diameter "path finder" domes. Half of these were processed using a concave spin form process (MT Aerospace, Augsburg Germany) and the other half using a convex process (Spincraft, Boston MA). The convex process has been used to produce the Ares Common Bulkhead and the concave process has been used to produce dome caps for the Space Shuttle light weight external tank and domes for the NASDA H2. Aluminum Lithium material was chosen because of its higher strength to weight ratio than the Aluminum 2219 baseline. Aluminum lithium, in order to obtain the desired temper (T8), requires a cold stretch after the solution heat treatment and quench. This requirement favors the concave spin form process which was selected for scale up. This paper describes the results of processing four, 5.5 meter diameter (upper stage scale) net shaped spin formed Aluminum Lithium domes. In order to allow scalability beyond the limits of foundry and rolling mills (about 12 foot width) the circular blank contained one friction stir weld (heavy lifter scales require a flat blank containing two welds). Mechanical properties data (tensile, fracture toughness, stress corrosion, and simulated service testing) for the parent metal and weld will also be discussed.

Practical Math Skills: Situations--Strategies--Solutions. Junior High Level. Grades 7-8-9.

ERIC Educational Resources Information Center

Duncan, Jim

This material is a supplement to existing mathematics programs for young learners. The activities presented are based on assumptions about the young problem solver which are difficult to address in standard mathematics texts. In these pages it is assumed that each learner brings to the problem-solving effort a very personal experience base and a…

Growing Up Strong: A Mental Wellness and Life Skills Development Program. Spanish Bilingual Supplement for Preschoolers.

ERIC Educational Resources Information Center

Hammer, Judith McGowan; O'Bar, Angelina Merenda

Growing Up Strong (GUS), a mental health and substance abuse prevention program, was developed to help preschoolers through sixth graders gain improved mental and physical health and establish positive relationships with significant adults. The Spanish Bilingual Supplement to the preschool-level GUS program also promotes respect for Spanish…

Transport composite fuselage technology: Impact dynamics and acoustic transmission

NASA Technical Reports Server (NTRS)

Jackson, A. C.; Balena, F. J.; Labarge, W. L.; Pei, G.; Pitman, W. A.; Wittlin, G.

1986-01-01

A program was performed to develop and demonstrate the impact dynamics and acoustic transmission technology for a composite fuselage which meets the design requirements of a 1990 large transport aircraft without substantial weight and cost penalties. The program developed the analytical methodology for the prediction of acoustic transmission behavior of advanced composite stiffened shell structures. The methodology predicted that the interior noise level in a composite fuselage due to turbulent boundary layer will be less than in a comparable aluminum fuselage. The verification of these analyses will be performed by NASA Langley Research Center using a composite fuselage shell fabricated by filament winding. The program also developed analytical methodology for the prediction of the impact dynamics behavior of lower fuselage structure constructed with composite materials. Development tests were performed to demonstrate that the composite structure designed to the same operating load requirement can have at least the same energy absorption capability as aluminum structure.

Dietary Supplement Laboratory Quality Assurance Program: The First Five Exercises

PubMed Central

Phillips, Melissa M.; Rimmer, Catherine A.; Wood, Laura J.; Lippa, Katrice A.; Sharpless, Katherine E.; Duewer, David L.; Sander, Lane C.; Betz, Joseph M.

2011-01-01

The National Institute of Standards and Technology (NIST) has established a Dietary Supplement Laboratory Quality Assurance Program (DSQAP) in collaboration with the National Institutes of Health Office of Dietary Supplements. Program participants measure concentrations of active and/or marker compounds as well as nutritional and toxic elements in food and dietary supplements distributed by NIST. Data are compiled at NIST, where they are analyzed for accuracy relative to reference values and concordance among the participants. Performance reports and certificates of completion are provided to participants, which can be used to demonstrate compliance with current Good Manufacturing Practices as promulgated by the U.S. Food and Drug Administration. The DSQAP has conducted five exercises to date, with total participation including more than 75 different laboratories and many more individual analysts. PMID:21797008

22 CFR 71.12 - Dietary supplements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Dietary supplements. 71.12 Section 71.12... Incarcerated Abroad § 71.12 Dietary supplements. (a) Eligibility criteria. A prisoner is considered eligible for the dietary supplement program under the following general criteria: (1) An evaluation by a...

22 CFR 71.12 - Dietary supplements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Dietary supplements. 71.12 Section 71.12... Incarcerated Abroad § 71.12 Dietary supplements. (a) Eligibility criteria. A prisoner is considered eligible for the dietary supplement program under the following general criteria: (1) An evaluation by a...

22 CFR 71.12 - Dietary supplements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Dietary supplements. 71.12 Section 71.12... Incarcerated Abroad § 71.12 Dietary supplements. (a) Eligibility criteria. A prisoner is considered eligible for the dietary supplement program under the following general criteria: (1) An evaluation by a...

22 CFR 71.12 - Dietary supplements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Dietary supplements. 71.12 Section 71.12... Incarcerated Abroad § 71.12 Dietary supplements. (a) Eligibility criteria. A prisoner is considered eligible for the dietary supplement program under the following general criteria: (1) An evaluation by a...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 2 2012-10-01 2012-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 2 2014-10-01 2014-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 2 2013-10-01 2013-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

42 CFR 403.220 - Supplemental Health Insurance Panel.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 2 2011-10-01 2011-10-01 false Supplemental Health Insurance Panel. 403.220 Section 403.220 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Programs § 403.220 Supplemental Health Insurance Panel. (a) Membership. The Supplemental Health Insurance...

22 CFR 71.12 - Dietary supplements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Dietary supplements. 71.12 Section 71.12... Incarcerated Abroad § 71.12 Dietary supplements. (a) Eligibility criteria. A prisoner is considered eligible for the dietary supplement program under the following general criteria: (1) An evaluation by a...

FY 1998 Proposed Rail Improvement Program Supplement Update - Bloomington II

DOT National Transportation Integrated Search

1997-07-01

The purpose of this amendment to the FY 1998 Rail Improvement Program Supplement : is to present an analysis which has been formulated, using prescribed methodology, to assist in an investment decision concerning track rehabilitation and new track co...

FY 1998 Proposed Rail Improvement Program Supplement Update - Pontiac

DOT National Transportation Integrated Search

1997-07-01

The purpose of this amendment to the FY 1998 Rail Improvement Program Supplement is to present an analysis which has been formulated, using prescribed methodology, to assist in an investment decision concerning new track construction at the Prairie C...

Preschool children's development in classic Montessori, supplemented Montessori, and conventional programs.

PubMed

Lillard, Angeline S

2012-06-01

Research on the outcomes of Montessori education is scarce and results are inconsistent. One possible reason for the inconsistency is variations in Montessori implementation fidelity. To test whether outcomes vary according to implementation fidelity, we examined preschool children enrolled in high fidelity classic Montessori programs, lower fidelity Montessori programs that supplemented the program with conventional school activities, and, for comparison, conventional programs. Children were tested at the start and end of the school year on a range of social and academic skills. Although they performed no better in the fall, children in Classic Montessori programs, as compared with children in Supplemented Montessori and Conventional programs, showed significantly greater school-year gains on outcome measures of executive function, reading, math, vocabulary, and social problem-solving, suggesting that high fidelity Montessori implementation is associated with better outcomes than lower fidelity Montessori programs or conventional programs. Copyright © 2012 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Federal Spending for Means Tested Programs, 2007 to 2027

DTIC Science & Technology

2017-02-01

child tax credits (which are refundable), the Supplemental Nutrition Assistance Program (SNAP), and Supplemental Security Income. The largest non...child tax credits, and SNAP—have been or will be significantly affected by program changes that unfold over time: B Medicaid spending rose by 35...total outlays in the Part D program). Increases in the number of beneficiaries account for about one- third of that growth; the introduction of new

Work Begins at School.

ERIC Educational Resources Information Center

Casto, James E.

2001-01-01

Students at Clay County High School (West Virginia) get real-world work experience through the school's comprehensive School-to-Work program, now in its third year. Given the limited job availability in this poor rural area, the school supplements work-site experiences with school-based business enterprises, student construction projects, and…

Teaching Cardiovascular Integrations with Computer Laboratories.

ERIC Educational Resources Information Center

Peterson, Nils S.; Campbell, Kenneth B.

1985-01-01

Describes a computer-based instructional unit in cardiovascular physiology. The program (which employs simulated laboratory experimental techniques with a problem-solving format is designed to supplement an animal laboratory and to offer students an integrative approach to physiology through use of microcomputers. Also presents an overview of the…

A high performance hybrid battery based on aluminum anode and LiFePO4 cathode.

PubMed

Sun, Xiao-Guang; Bi, Zhonghe; Liu, Hansan; Fang, Youxing; Bridges, Craig A; Paranthaman, M Parans; Dai, Sheng; Brown, Gilbert M

2016-01-28

A novel hybrid battery utilizing an aluminum anode, a LiFePO4 cathode and an acidic ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium chloride (EMImCl) and aluminum trichloride (AlCl3) (EMImCl-AlCl3, 1-1.1 in molar ratio) with or without LiAlCl4 is proposed. The hybrid ion battery delivers an initial high capacity of 160 mA h g(-1) at a current rate of C/5. It also shows good rate capability and cycling performance.

A high performance hybrid battery based on aluminum anode and LiFePO 4 cathode

DOE PAGES

Sun, Xiao-Guang; Bi, Zhonghe; Liu, Hansan; ...

2015-12-07

A unique battery hybrid utilizes an aluminum anode, a LiFePO 4 cathode and an acidic ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium chloride (EMImCl) and aluminum trichloride (AlCl 3) (EMImCl-AlCl 3, 1-1.1 in molar ratio) with or without LiAlCl 4 is proposed. This hybrid ion battery delivers an initial high capacity of 160 mAh g -1 at a current rate of C/5. It also shows good rate capability and cycling performance.

Niobium-aluminum base alloys having improved, high temperature oxidation resistance

NASA Technical Reports Server (NTRS)

Hebsur, Mohan G. (Inventor); Stephens, Joseph R. (Inventor)

1991-01-01

A niobium-aluminum base alloy having improved oxidation resistance at high temperatures and consisting essentially of 48%-52% niobium, 36%-42% aluminum, 4%-10% chromium, 0%-2%, more preferably 1%-2%, silicon and/or tungsten with tungsten being preferred, and 0.1%-2.0% of a rare earth selected from the group consisting of yttrium, ytterbium and erbium. Parabolic oxidation rates, k.sub.p, at 1200.degree. C. range from about 0.006 to 0.032 (mg/cm.sup.2).sup.2 /hr. The new alloys also exhibit excellent cyclic oxidation resistance.

Application of nanodimensional particles and aluminum hydroxide nanostructures for cancer diagnosis and therapy

NASA Astrophysics Data System (ADS)

Korovin, M. S.; Fomenko, A. N.

2017-09-01

Nanoparticles and nanostructured materials are one of the most promising developments for cancer therapy. Gold nanoparticles, magnetic nanoparticles based on iron and its oxides and other metal oxides have been widely used in diagnosis and treatment of cancer. Much less researchers' attention has been paid to nanoparticles and nanostructures based on aluminum oxides and hydroxides as materials for cancer diagnosis and treatment. However, recent investigations have shown promising results regarding these objects. Here, we review the antitumor results obtained with different aluminum oxide/hydroxide nanoparticles and nanostructures.

Cryogenic Gellant and Fuel Formulation for Metallized Gelled Propellants: Hydrocarbons and Hydrogen with Aluminum

NASA Technical Reports Server (NTRS)

Wong, Wing; Starkovich, John; Adams, Scott; Palaszewski, Bryan; Davison, William; Burt, William; Thridandam, Hareesh; Hu-Peng, Hsiao; Santy, Myrrl J.

1994-01-01

An experimental program to determine the viability of nanoparticulate gellant materials for gelled hydrocarbons and gelled liquid hydrogen was conducted. The gellants included alkoxides (BTMSE and BTMSH) and silica-based materials. Hexane, ethane, propane and hydrogen were gelled with the newly-formulated materials and their rheological properties were determined: shear stress versus shear rate and their attendant viscosities. Metallized hexane with aluminum particles was also rheologically characterized. The propellant and gellant formulations were selected for the very high surface area and relatively-high energy content of the gellants. These new gellants can therefore improve rocket engine specific impulse over that obtained with traditional cryogenic-fuel gellant materials silicon dioxide, frozen methane, or frozen ethane particles. Significant reductions in the total mass of the gellant were enabled in the fuels. In gelled liquid hydrogen, the total mass of gellant was reduced from 10-40 wt percent of frozen hydrocarbon particles to less that 8 wt percent with the alkoxide.

Adverse Effects of Common Drugs: Dietary Supplements.

PubMed

Felix, Todd Matthew; Karpa, Kelly Dowhower; Lewis, Peter R

2015-09-01

Dietary supplement-induced adverse effects often resolve quickly after discontinuation of the offending product, especially in younger patients. The potential for unwanted outcomes can be amplified in elderly patients or those taking multiple prescription drugs, especially where interactions exist with drugs metabolized by cytochrome P450 enzymes. Attributing injury or illness to a specific supplement can be challenging, especially in light of multi-ingredient products, product variability, and variability in reporting, as well as the vast underreporting of adverse drug reactions. Clinicians prescribing a new drug or evaluating a patient with a new symptom complex should inquire about use of herbal and dietary supplements as part of a comprehensive evaluation. Clinicians should report suspected supplement-related adverse effects to the local or state health department, as well as the Food and Drug Administration's MedWatch program (available at https://www.safetyreporting.hhs.gov). Clinicians should consider discussing suspected adverse effects involving drugs, herbal products, or dietary supplements with their community- and hospital-based pharmacists, and explore patient management options with medical or clinical toxicology subspecialists. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

A cluster-randomized, controlled trial of nutritional supplementation and promotion of responsive parenting in Madagascar: the MAHAY study design and rationale.

PubMed

Fernald, Lia C H; Galasso, Emanuela; Qamruddin, Jumana; Ranaivoson, Christian; Ratsifandrihamanana, Lisy; Stewart, Christine P; Weber, Ann M

2016-06-03

Over half of the world's children suffer from poor nutrition, and as a consequence they experience delays in physical and mental health, and cognitive development. There is little data evaluating the effects of delivery of lipid-based, nutrition supplementation on growth and development during pregnancy and early childhood within the context of a scaled-up program. Furthermore, there is limited evidence on effects of scaled-up, home-visiting programs that focus on the promotion of child development within the context of an existing, national nutrition program. The MAHAY ("smart" in Malagasy) study uses a multi-arm randomized-controlled trial (RCT) to test the effects and cost-effectiveness of combined interventions to address chronic malnutrition and poor child development. The arms of the trial are: (T0) existing program with monthly growth monitoring and nutritional/hygiene education; (T1) is T0 + home visits for intensive nutrition counseling within a behavior change framework; (T2) is T1 + lipid-based supplementation (LNS) for children 6-18 months old; (T3) is T2 + LNS supplementation of pregnant/lactating women; and (T4) is T1 + intensive home visiting program to support child development. There are anticipated to be n = 25 communities in each arm (n = 1250 pregnant women, n = 1250 children 0-6 months old, and n = 1250 children 6-18 months old). Primary outcomes include growth (length/height-for-age z-scores) and child development (mental, motor and social development). Secondary outcomes include care-giver reported child morbidity, household food security and diet diversity, micro-nutrient status, maternal knowledge of child care and feeding practices, and home stimulation practices. We will estimate unadjusted and adjusted intention-to-treat effects. Study protocols have been reviewed and approved by the Malagasy Ethics Committee at the Ministry of Health in Madagascar and by the institutional review board at the University of California, Davis. This study is funded by the Strategic Impact Evaluation Fund (SIEF), the World Bank Innovation Grant, the Early Learning Partnership Grant, the Japan Scaling-up for Nutrition Trustfund, and Grand Challenges Canada. The implementation of the study is financed by Madagascar's National Nutrition Office. Current Controlled Trials ISRCTN14393738 . Registered June 23, 2015.

Crack growth behavior of 2219-T87 aluminum alloy from 20 K (-423 F) to 422 K (300 F)

NASA Technical Reports Server (NTRS)

Witzell, W. E.

1973-01-01

The aluminum alloy 2219-T87 has great potential for use as a cryogenic material for various manned and unmanned aerospace vehicles. Although its properties are generally known, toughness characteristics in various grain directions when the material is machined from thick plates and subjected to various environments have not been documented. This program, sponsored by the NASA Johnson Space Center, was designed to determine these properties between 20 K (-423 F) and 423 K (300 F).

Analysis of the Noneroding Penetration of Tungsten Alloy Long Rods into Aluminum Targets

DTIC Science & Technology

2003-09-01

J D YATTEAU 5941 S MIDDLEFIELD RD SUITE 100 LITTLETON CO 80123 2 APPLIED RESEARCH ASSOC INC D GRADY F MAESTAS SUITE A220 4300...of Tungsten Alloy Long Rods Into Aluminum Targets 5c. PROGRAM ELEMENT NUMBER 5d. PROJECT NUMBER AH80 5e. TASK NUMBER 6. AUTHOR( S ) Steven B...Segletes 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) U.S. Army Research Laboratory ATTN: AMSRL-WM-TD Aberdeen

Study of Cavitation and Failure Mechanisms of a Superplastic 5083 Aluminum Alloy

DTIC Science & Technology

2003-09-01

Failure Mechanisms of a Superplastic 5083 Aluminum Alloy 6. AUTHOR( S ) Boydon, Juanito F. 5. FUNDING NUMBERS 7. PERFORMING ORGANIZATION NAME( S ) AND...NAME( S ) AND ADDRESS(ES) General Motors Corp., Research and Development Center, Warren, MI (Dr. Paul E. Krajewski, Technical Program...of 973931(A3), deformed gauge area 1- region 1. Sample was pulled under uniaxial tension at 450 °C at a strain rate of 3x10-4 s -1 and elongated to

Grumman electric truck development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, J.C.; Ferdman, S.

1981-11-01

An electric truck development was undertaken to prepare for the markets of the 1980's. Grumman is using its aluminum truck bodies technology to create a light weight vehicle. A redesigned unitized, all aluminum body and a new propulsion system resulted in the desired vehicle. The vehicle meets the requirements of the US Postal Service and the DOE Demonstration program. The unitized chassisless structure is designed to take major driving loads. Design features and performance characteristics are enumerated. Safety and service considerations have been incorporated into the vehicle.

Refurbishment of SRB aluminum components by walnut hull blast removal of protective coatings

NASA Technical Reports Server (NTRS)

Colberg, W. R.; Gordon, G. H.; Jackson, C. H.

1982-01-01

A test program was conducted to develop, optimize, and scale up an abrasive blasting procedure was developed for refurbishment of specific SRB components: aft skirt, forward skirt, frustrum, and painted piece parts. Test specimens utilizing 2219 T87 aluminum substrate of varying thicknesses were prepared and blasted at progressively increasing pressures with selected abrasives. Specimens were analyzed for material response. The optimum blasting parameters were determined on panel specimens and verified on a large cylindrical integrated test bed.

Carbon-carbon piston development

NASA Technical Reports Server (NTRS)

Gorton, Mark P.

1994-01-01

A new piston concept, made of carbon-carbon refractory-composite material, has been developed that overcomes a number of the shortcomings of aluminum pistons. Carbon-carbon material, developed in the early 1960's, is lighter in weight than aluminum, has higher strength and stiffness than aluminum and maintains these properties at temperatures over 2500 F. In addition, carbon-carbon material has a low coefficient of thermal expansion and excellent resistance to thermal shock. An effort, called the Advanced Carbon-Carbon Piston Program was started in 1986 to develop and test carbon-carbon pistons for use in spark ignition engines. The carbon-carbon pistons were designed to be replacements for existing aluminum pistons, using standard piston pin assemblies and using standard rings. Carbon-carbon pistons can potentially enable engines to be more reliable, more efficient and have greater power output. By utilizing the unique characteristics of carbon-carbon material a piston can: (1) have greater resistance to structural damage caused by overheating, lean air-fuel mixture conditions and detonation; (2) be designed to be lighter than an aluminum piston thus, reducing the reciprocating mass of an engine, and (3) be operated in a higher combustion temperature environment without failure.

A Changing Landscape for Vitamin A Programs: Implications for Optimal Intervention Packages, Program Monitoring, and Safety.

PubMed

Klemm, Rolf D W; Palmer, Amanda C; Greig, Alison; Engle-Stone, Reina; Dalmiya, Nita

2016-06-01

Vitamin A deficiency (VAD) remains a widespread public health problem in the developing world, despite changes in under-5 mortality rates, morbidity patterns, and intervention options. This article considers the implications of a changing epidemiologic and programmatic landscape for vitamin A (VA) programs. We review progress to prevent VAD and its health consequences, assess gaps in VA status and intervention coverage data, and assess data needed to guide decisions regarding the optimal mix, targeting, and dose of VA interventions to maximize benefit and minimize risk. Vitamin A supplementation programs have contributed to the reduction in under-5 mortality rates, but alone, do not address the underlying problem of inadequate dietary VA intakes and VAD among preschool-aged children in the developing world. A combination of VA interventions (eg, supplementation, fortified foods, multiple micronutrient powders, and lipid-based nutrient supplements) will be required to achieve VA adequacy in most settings. Current efforts to measure the coverage of multiple VA interventions, as well as whether and how much VA children are receiving, are few and fragmented. Where intervention overlap exists, further effort is needed to monitor VA intakes, ensuring that targeted groups are consuming adequate amounts but not exceeding the tolerable upper intake level. Vitamin A status data will also be critical for navigating the changing landscape of VA programs. Data from these monitoring efforts will help to guide decisions on the optimal mix, targeting, and exposure to VA interventions to maximize public health benefit while minimizing any potential risk. © The Author(s) 2016.