Laser ablation/ionization characterization of solids: Second interim progress report of the strategic environmental research development program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hess, W.P.; Bushaw, B.A.; McCarthy, M.I.

1996-10-01

The Department of Energy is undertaking the enormous task of remediating defense wastes and environmental insults which have occurred over 50 years of nuclear weapons production. It is abundantly clear that significant technology advances are needed to characterize, process, and store highly radioactive waste and to remediate contaminated zones. In addition to the processing and waste form issues, analytical technologies needed for the characterization of solids, and for monitoring storage tanks and contaminated sites do not exist or are currently expensive labor-intensive tasks. This report describes progress in developing sensitive, rapid, and widely applicable laser-based mass spectrometry techniques for analysismore » of mixed chemical wastes and contaminated soils.« less

Low-Cost, Net-Shape Ceramic Radial Turbine Program

DTIC Science & Technology

1985-05-01

PROGRAM ELEMENT. PROJECT. TASK Garrett Turbine Engine Company AE OKUI UBR 111 South 34th Street, P.O. Box 2517 Phoenix, Arizona 85010 %I. CONTROLLING...processing iterations. Program management and materials characterization were conducted at Garrett Turbine Engine Company (GTEC), test bar and rotor...automotive gas turbine engine rotor development efforts at ACC. xvii PREFACE This is the final technical report of the Low-Cost, Net- Shape Ceramic

IVHS Countermeasures for Rear-End Collisions, Task 1; Vol. II: Statistical Analysis

DOT National Transportation Integrated Search

1994-02-25

This report is from the NHTSA sponsored program, "IVHS Countermeasures for Rear-End Collisions". This Volume, Volume II, Statistical Analysis, presents the statistical analysis of rear-end collision accident data that characterizes the accidents with...

Status of the Ford program to evaluate ceramics for stator applications in automotive gas turbine engines

NASA Technical Reports Server (NTRS)

Trela, W.

1980-01-01

The paper reviews the progress of the major technical tasks of the DOE/NASA/Ford program Evaluation of Ceramics for Stator Applications in Automotive Gas Turbine Engines: reliability prediction, stator fabrication, material characterization, and stator evaluation. A fast fracture reliability model was prepared for a one-piece ceramic stator. Periodic inspection results are presented.

Instrumental Relationships: A Potential Relational Model for Inner-City Youth Programs

ERIC Educational Resources Information Center

Halpern, Robert

2005-01-01

In this article, a distinct type of adult-youth relationship found in some youth programs and characterized as instrumental is discussed. Such relationships focus primarily on joint work on a task or project, or in a discipline, with the adult having expertise and a strong identity in the substantive domain involved, rather than in youth work per…

Coal Combustion Science quarterly progress report, April--June 1992. Task 1, Coal devolatilization: Task 2, Coal char combustion; Task 3, Fate of mineral matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardesty, D.R.; Hurt, R.H.; Baxter, L.L.

1992-09-01

The objective of this work is to support the Office of Fossil Energy in executing research on coal combustion science. This project consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center (PETC) Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency (IEA) Coal Combustion Science Project. Specific tasks include: The characterization of the physical and chemical processes that constitute the early devolatilization phase of coal combustion: Characterization of the combustion behavior of selected coals under conditions relevant to industria pulverized coal-fired furnaces; and to establish a quantitative understanding of themore » mechanisms and rates of transformation, fragmentation, and deposition of mineral matter in coal combustion environments as a function of coal type, particle size and temperature, the initial forms and distributions of mineral species in the unreacted coal, and the local gas temperature and composition.« less

Evidence Report: Risk of Performance Errors Due to Training Deficiencies

NASA Technical Reports Server (NTRS)

Barshi, Immanuel

2012-01-01

The Risk of Performance Errors Due to Training Deficiencies is identified by the National Aeronautics and Space Administration (NASA) Human Research Program (HRP) as a recognized risk to human health and performance in space. The HRP Program Requirements Document (PRD) defines these risks. This Evidence Report provides a summary of the evidence that has been used to identify and characterize this risk. Given that training content, timing, intervals, and delivery methods must support crew task performance, and given that training paradigms will be different for long-duration missions with increased crew autonomy, there is a risk that operators will lack the skills or knowledge necessary to complete critical tasks, resulting in flight and ground crew errors and inefficiencies, failed mission and program objectives, and an increase in crew injuries.

Teaching Communication Skills in Science: Tracing Teacher Change

ERIC Educational Resources Information Center

Spektor-Levy, Ornit; Eylon, Bat-Sheva; Scherz, Zahava

2008-01-01

This paper describes a general model for skills instruction and its implementation through the program "Scientific Communication" for acquiring learning skills. The model is characterized by modularity, explicit instruction, spiral integration into contents, practice in various contexts, and implementation in performance tasks. It requires…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.

The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, “Modeling EERE Deployment Programs,” sponsored by the Planning, Analysis, and Evaluation office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites. FY 1992 year-end progress report: Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the ``60`s Pits`` area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the 60's Pits'' area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

Experimental measurements of motion cue effects on STOL approach tasks

NASA Technical Reports Server (NTRS)

Ringland, R. F.; Stapleford, R. L.

1972-01-01

An experimental program to investigate the effects of motion cues on STOL approach is presented. The simulator used was the Six-Degrees-of-Freedom Motion Simulator (S.01) at Ames Research Center of NASA which has ?2.7 m travel longitudinally and laterally and ?2.5 m travel vertically. Three major experiments, characterized as tracking tasks, were conducted under fixed and moving base conditions: (1) A simulated IFR approach of the Augmentor Wing Jet STOL Research Aircraft (AWJSRA), (2) a simulated VFR task with the same aircraft, and (3) a single-axis task having only linear acceleration as the motion cue. Tracking performance was measured in terms of the variances of several motion variables, pilot vehicle describing functions, and pilot commentary.

EVALUATION TECHNIQUES AND TOOL DEVELOPMENT FOR FY 08 CMAQ RELEASE

EPA Science Inventory

In this task, research efforts are outlined that relate to the AMD Model Evaluation Program element and support CMAQ releases within the FY05-FY08 time period. Model evaluation serves dual purposes; evaluation is necessary to characterize the accuracy of model predictions, and e...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.; Bannochie, C. J.

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of verification of Macrobatch (Salt Batch) 11 for the Interim Salt Disposition Program (ISDP) for processing. This document reports characterization data on the samples of Tank 21H and fulfills the requirements of Deliverable 3 of the Technical Task Request (TTR).

Characterization of NF1 Protein Ubiquitination

DTIC Science & Technology

2008-06-01

Ubiquitination PRINCIPAL INVESTIGATOR: Koko Murakami, Ph.D. Victor A Fried, Ph.D. CONTRACTING ORGANIZATION: New York Medical College...NUMBER W81XWH-07-1-0432 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Koko Murakami, Ph.D.; Victor A Fried, Ph.D. 5d. PROJECT NUMBER 5e. TASK

Vaccum Gas Tungsten Arc Welding, phase 1

NASA Astrophysics Data System (ADS)

Weeks, J. L.; Krotz, P. D.; Todd, D. T.; Liaw, Y. K.

1995-03-01

This two year program will investigate Vacuum Gas Tungsten Arc Welding (VGTAW) as a method to modify or improve the weldability of normally difficult-to-weld materials. VGTAW appears to offer a significant improvement in weldability because of the clean environment and lower heat input needed. The overall objective of the program is to develop the VGTAW technology and implement it into a manufacturing environment that will result in lower cost, better quality and higher reliability aerospace components for the space shuttle and other NASA space systems. Phase 1 of this program was aimed at demonstrating the process's ability to weld normally difficult-to-weld materials. Phase 2 will focus on further evaluation, a hardware demonstration and a plan to implement VGTAW technology into a manufacturing environment. During Phase 1, the following tasks were performed: (1) Task 11000 Facility Modification - an existing vacuum chamber was modified and adapted to a GTAW power supply; (2) Task 12000 Materials Selection - four difficult-to-weld materials typically used in the construction of aerospace hardware were chosen for study; (3) Task 13000 VGTAW Experiments - welding experiments were conducted under vacuum using the hollow tungsten electrode and evaluation. As a result of this effort, two materials, NARloy Z and Incoloy 903, were downselected for further characterization in Phase 2; and (4) Task 13100 Aluminum-Lithium Weld Studies - this task was added to the original work statement to investigate the effects of vacuum welding and weld pool vibration on aluminum-lithium alloys.

Vaccum Gas Tungsten Arc Welding, phase 1

NASA Technical Reports Server (NTRS)

Weeks, J. L.; Krotz, P. D.; Todd, D. T.; Liaw, Y. K.

1995-01-01

This two year program will investigate Vacuum Gas Tungsten Arc Welding (VGTAW) as a method to modify or improve the weldability of normally difficult-to-weld materials. VGTAW appears to offer a significant improvement in weldability because of the clean environment and lower heat input needed. The overall objective of the program is to develop the VGTAW technology and implement it into a manufacturing environment that will result in lower cost, better quality and higher reliability aerospace components for the space shuttle and other NASA space systems. Phase 1 of this program was aimed at demonstrating the process's ability to weld normally difficult-to-weld materials. Phase 2 will focus on further evaluation, a hardware demonstration and a plan to implement VGTAW technology into a manufacturing environment. During Phase 1, the following tasks were performed: (1) Task 11000 Facility Modification - an existing vacuum chamber was modified and adapted to a GTAW power supply; (2) Task 12000 Materials Selection - four difficult-to-weld materials typically used in the construction of aerospace hardware were chosen for study; (3) Task 13000 VGTAW Experiments - welding experiments were conducted under vacuum using the hollow tungsten electrode and evaluation. As a result of this effort, two materials, NARloy Z and Incoloy 903, were downselected for further characterization in Phase 2; and (4) Task 13100 Aluminum-Lithium Weld Studies - this task was added to the original work statement to investigate the effects of vacuum welding and weld pool vibration on aluminum-lithium alloys.

Coherence between harvest and habitat management -- Joint venture perspectives

USGS Publications Warehouse

Baxter, C.K.; Nelson, J.W.; Reinecke, K.J.; Stephens, S.E.

2006-01-01

Introduction: In recent months, an ad hoc group of waterfowl scientists, representing the International Association of Fish and Wildlife Agencies (IAFWA) Adaptive Harvest Management (ARM) Task Force and the North American Waterfowl Management Plan (NAWMP) Committee, have collaborated as a Joint Task Group (JTG) to assess options for unifying the population goals guiding waterfowl harvest management and habitat management. The JTG has been charged with bringing coherence to the population goals of the two programs. Characterizing the problem as one of coherence indicates value judgments exist regarding its significance or perhaps existence. For purposes of this paper, we characterize the lack of coherence as the absence of consistent population goals in the two related components of waterfowl conservation habitat and harvest management. Our purpose is to support continued dialogue on the respective goals of these programs and the possible implications of discordant goals to habitat joint ventures. Our objectives are two-fold: (1) illustrate how NAWMP habitat management goals and strategies have been interpreted and pursued in both breeding and wintering areas, and (2) provide perspectives on the linkages between regional habitat management programs and harvest management. The Lower Mississippi Valley and the Prairie Pothole joint ventures (LMVJV and PPJV, respectively) will be used as examples.

Adjunct laboratory tests in support of US/German salt characterization program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchholz, Stuart A.

2014-07-01

In summary, the goal of this activity is to complete a subset of a test matrix on salt from the Waste Isolation Pilot Plant (WIPP) undertaken by German research groups. The work will be performed at RESPEC in Rapid City, South Dakota, and is divided into three tasks.

Random Forests for Evaluating Pedagogy and Informing Personalized Learning

ERIC Educational Resources Information Center

Spoon, Kelly; Beemer, Joshua; Whitmer, John C.; Fan, Juanjuan; Frazee, James P.; Stronach, Jeanne; Bohonak, Andrew J.; Levine, Richard A.

2016-01-01

Random forests are presented as an analytics foundation for educational data mining tasks. The focus is on course- and program-level analytics including evaluating pedagogical approaches and interventions and identifying and characterizing at-risk students. As part of this development, the concept of individualized treatment effects (ITE) is…

Optical properties of fly ash. Volume 2, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Self, S.A.

1994-12-01

Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executivemore » summary of the whole program followed by the dissertation of Ghosal and Ebert. Volume 2 contains the dissertation of Ebert which covers the measurements of the optical constants of slags, and calculations of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.« less

Developing a taxonomy for mission architecture definition

NASA Technical Reports Server (NTRS)

Neubek, Deborah J.

1990-01-01

The Lunar and Mars Exploration Program Office (LMEPO) was tasked to define candidate architectures for the Space Exploration Initiative to submit to NASA senior management and an externally constituted Outreach Synthesis Group. A systematic, structured process for developing, characterizing, and describing the alternate mission architectures, and applying this process to future studies was developed. The work was done in two phases: (1) national needs were identified and categorized into objectives achievable by the Space Exploration Initiative; and (2) a program development process was created which both hierarchically and iteratively describes the program planning process.

Qualitative Analysis for Maintenance Process Assessment

NASA Technical Reports Server (NTRS)

Brand, Lionel; Kim, Yong-Mi; Melo, Walcelio; Seaman, Carolyn; Basili, Victor

1996-01-01

In order to improve software maintenance processes, we first need to be able to characterize and assess them. These tasks must be performed in depth and with objectivity since the problems are complex. One approach is to set up a measurement-based software process improvement program specifically aimed at maintenance. However, establishing a measurement program requires that one understands the problems to be addressed by the measurement program and is able to characterize the maintenance environment and processes in order to collect suitable and cost-effective data. Also, enacting such a program and getting usable data sets takes time. A short term substitute is therefore needed. We propose in this paper a characterization process aimed specifically at maintenance and based on a general qualitative analysis methodology. This process is rigorously defined in order to be repeatable and usable by people who are not acquainted with such analysis procedures. A basic feature of our approach is that actual implemented software changes are analyzed in order to understand the flaws in the maintenance process. Guidelines are provided and a case study is shown that demonstrates the usefulness of the approach.

SUPERFUND INNOVATIVE TECHNOLOGIES EVALUATION ...

EPA Pesticide Factsheets

This task seeks to identify high priority needs of the Regions and Program Offices for innovative field sampling, characterization, monitoring, and measurement technologies. When an appropriate solution to a specific problem is identified, a field demonstration is conducted to document the performance and cost of the proposed technologies. The use of field analysis almost always provides a savings in time and cost over the usual sample and ship to a conventional laboratory for analysis approach to site characterization and monitoring. With improvements in technology and appropriate quality assurance/quality control, field analysis has been shown to provide high quality data, useful for most environmental monitoring or characterization projects. An emphasis of the program is to seek out innovative solutions to existing problems and to provide the cost and performance data a user would require to make an informed decision regarding the adequacy of a technology to address a specific environmental problem. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Radiological Threat Reduction (RTR) program : implementing physical security to protect large radioactive sources worldwide.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowe, Daniel L.

2004-11-01

The U.S. Department of Energy's Radiological Threat Reduction (RTR) Program strives to reduce the threat of a Radiological Dispersion Device (RDD) incident that could affect U.S. interests worldwide. Sandia National Laboratories supports the RTR program on many different levels. Sandia works directly with DOE to develop strategies, including the selection of countries to receive support and the identification of radioactive materials to be protected. Sandia also works with DOE in the development of guidelines and in training DOE project managers in physical protection principles. Other support to DOE includes performing rapid assessments and providing guidance for establishing foreign regulatory andmore » knowledge infrastructure. Sandia works directly with foreign governments to establish cooperative agreements necessary to implement the RTR Program efforts to protect radioactive sources. Once necessary agreements are in place, Sandia works with in-country organizations to implement various security related initiatives, such as installing security systems and searching for (and securing) orphaned radioactive sources. The radioactive materials of interest to the RTR program include Cobalt 60, Cesium 137, Strontium 90, Iridium 192, Radium 226, Plutonium 238, Americium 241, Californium 252, and Others. Security systems are implemented using a standardized approach that provides consistency through out the RTR program efforts at Sandia. The approach incorporates a series of major tasks that overlap in order to provide continuity. The major task sequence is to: Establish in-country contacts - integrators, Obtain material characterizations, Perform site assessments and vulnerability assessments, Develop upgrade plans, Procure and install equipment, Conduct acceptance testing and performance testing, Develop procedures, and Conduct training. Other tasks are incorporated as appropriate and commonly include such as support of reconfiguring infrastructure, and developing security plans, etc. This standardized approach is applied to specific country and regional needs. Recent examples (FY 2003-2004) include foreign missions to Lithuania, Russian Federation Navy, Russia - PNPI, Greece (joint mission with IAEA), Tanzania, Iraq, Chile, Ecuador, and Egypt. Some of the ambitions and results of the RTR program may be characterized by the successes in Lithuania, Greece, and Russia.« less

Development of an improved coating for polybenzimidazole foam. [for space shuttle heat shields

NASA Technical Reports Server (NTRS)

Neuner, G. J.; Delano, C. B.

1976-01-01

An improved coating system was developed for Polybenzimidazole (PBI) foam to provide coating stability, ruggedness, moisture resistance, and to satisfy optical property requirements (alpha sub (s/epsilon) or = 0.4 and epsilon 0.8) for the space shuttle. The effort was performed in five tasks: Task 1 to establish material and process specifications for the PBI foam, and material specifications for the coatings; Task 2 to identify and evaluate promising coatings; Task 3 to establish mechanical and thermophysical properties of the tile components; Task 4 to determine by systems analysis the potential weight trade-offs associated with a coated PBI TPS; and Task 5 to establish a preliminary quality assurance program. The coated PBI tile was, through screening tests, determined to satisfy the design objectives with a reduced system weight over the baseline shuttle silica LRSI TPS. The developed tile provides a thermally stable, extremely rugged, low thermal conductivity insulator with a well characterized optical coating.

Motor learning characterizes habilitation of children with hemiplegic cerebral palsy.

PubMed

Krebs, Hermano I; Fasoli, Susan E; Dipietro, Laura; Fragala-Pinkham, Maria; Hughes, Richard; Stein, Joel; Hogan, Neville

2012-09-01

This study tested in children with cerebral palsy (CP) whether motor habilitation resembles motor learning. Twelve children with hemiplegic CP ages 5 to 12 years with moderate to severe motor impairments underwent a 16-session robot-mediated planar therapy program to improve upper limb reach, with a focus on shoulder and elbow movements. Participants were trained to execute point-to-point movements (with robot assistance) with the affected arm and were evaluated (without robot assistance) in trained (point-to-point) and untrained (circle-drawing) conditions. Outcomes were measured at baseline, midpoint, immediately after the program, and 1 month postcompletion. Outcome measures were the Fugl-Meyer (FM), Quality of Upper Extremity Skills Test (QUEST), and Modified Ashworth Scale (MAS) scores; parent questionnaire; and robot-based kinematic metrics. To assess whether learning best characterizes motor habilitation in CP, the authors quantified (a) improvement on trained tasks at completion of training (acquisition) and 1 month following completion (retention) and (b) quantified generalization of improvement to untrained tasks. After robotic intervention, the authors found significant gains in the FM, QUEST, and parent questionnaire. Robot-based evaluations demonstrated significant improvement in trained movements and that improvement was sustained at follow-up. Furthermore, children improved their performance in untrained movements indicating generalization. Motor habilitation in CP exhibits some traits of motor learning. Optimal treatment may not require an extensive repertoire of tasks but rather a select set to promote generalization.

Energy Supply- Production of Fuel from Agricultural and Animal Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabriel Miller

2009-03-25

The Society for Energy and Environmental Research (SEER) was funded in March 2004 by the Department of Energy, under grant DE-FG-36-04GO14268, to produce a study, and oversee construction and implementation, for the thermo-chemical production of fuel from agricultural and animal waste. The grant focuses on the Changing World Technologies (CWT) of West Hempstead, NY, thermal conversion process (TCP), which converts animal residues and industrial food processing biproducts into fuels, and as an additional product, fertilizers. A commercial plant was designed and built by CWT, partially using grant funds, in Carthage, Missouri, to process animal residues from a nearby turkey processingmore » plant. The DOE sponsored program consisted of four tasks. These were: Task 1 Optimization of the CWT Plant in Carthage - This task focused on advancing and optimizing the process plant operated by CWT that converts organic waste to fuel and energy. Task 2 Characterize and Validate Fuels Produced by CWT - This task focused on testing of bio-derived hydrocarbon fuels from the Carthage plant in power generating equipment to determine the regulatory compliance of emissions and overall performance of the fuel. Task 3 Characterize Mixed Waste Streams - This task focused on studies performed at Princeton University to better characterize mixed waste incoming streams from animal and vegetable residues. Task 4 Fundamental Research in Waste Processing Technologies - This task focused on studies performed at the Massachusetts Institute of Technology (MIT) on the chemical reformation reaction of agricultural biomass compounds in a hydrothermal medium. Many of the challenges to optimize, improve and perfect the technology, equipment and processes in order to provide an economically viable means of creating sustainable energy were identified in the DOE Stage Gate Review, whose summary report was issued on July 30, 2004. This summary report appears herein as Appendix 1, and the findings of the report formed the basis for much of the subsequent work under the grant. An explanation of the process is presented as well as the completed work on the four tasks.« less

Designing and managing successful endangered species recovery programs

NASA Astrophysics Data System (ADS)

Clark, Tim W.; Crete, Ron; Cada, John

1989-03-01

Endangered species recovery is characterized by complexity and uncertainty in both its biological and organizational aspects. To improve performance in the organizational dimension, some models of organizations are briefly introduced with an emphasis on the organization as a system for processing information, i.e., for successfully dealing with the high uncertainty in the task environment. A strong task orientation,which rewards achievement of the primary goal, is suggested as ideal for this task, as is generative rationality, which encourages workers to observe, critique, and generate new ideas. The parallel organization—a flexible, participatory, problem-solving structure set up alongside traditional bureaucracies—is offered as a useful structure for meeting the demands of uncertainties encountered during recovery. Task forces and projects teams can be set up as parallel organizations. Improved managerial functions include coordinating roles to facilitate the flow and use of information; decision making to avoid “groupthink”—the defects, symptoms, and countermeasures are described; and productive, active management of the inevitable conflict. The inability of organizations to solve dilemmas, to examine their own structures and management, and to change themselves for more effective, efficient, and equitable performance is seen as the major obstacle to improved recovery programs. Some recommendations for effecting change in bureaucracies are made along with a call for case studies detailing the organizational dimensions of endangered species recovery programs.

Advanced Thermal Emission Imaging Systems Definition and Development

NASA Technical Reports Server (NTRS)

Blasius, Karl; Nava, David (Technical Monitor)

2002-01-01

Santa Barbara Remote Sensing (SBRS), Raytheon Company, is pleased to submit this quarterly progress report of the work performed in the third quarter of Year 2 of the Advanced THEMIS Project, July through September 2002. We review here progress in the proposed tasks. During July through September 2002 progress was made in two major tasks, Spectral Response Characterization and Flight Instrument Definition. Because of staffing problems and technical problems earlier in the program we have refocused the remaining time and budget on the key technical tasks. Current technical problems with a central piece of test equipment has lead us to request a 1 quarter extension to the period of performance. This request is being made through a separate letter independent of this report.

Prepolymer Characterization

DTIC Science & Technology

1988-10-01

and ZIP Code) 10 SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO. NO ACCESSION NO. 62302f ---5730 - o 00 AN 11. TITLE (Include...32 Preparative-Scale Reverse-Phase LC Fractionation of Polystyrene Homologs ..................................... 35 Work -Up of...were also employed. In addition, much of the work was based upon R-45M. However, the fundamental analytical developments and resultant practical

Analytic Support of Emergency Response and Recovery for the Wide-Area Recovery & Resiliency Program (WARRP) Task 1: Medical Countermeasures Response

DTIC Science & Technology

2012-02-23

time Detect and Characterize Event Multiple Materiel No integration between national biosurveillance systems Could receive disparate signals and the...is very limited in its applicability at this time only being deployable in one city and in the process of being implemented in four more Push models

Mentoring for Diversity and Equity: Focusing on Students of Color and New Teachers of Color

ERIC Educational Resources Information Center

Achinstein, Betty

2012-01-01

The task of preparing and supporting new teachers for working with diverse youth has generated widespread interest in induction and mentoring programs (Wang & Odell, 2002). However, much of mentoring in practice falls short of equity- and diversity-focused work. It can be better characterized as "situational adjustment, technical advice, and…

Considerations and measurements of latent-heat-storage salts for secondary thermal battery applications

NASA Astrophysics Data System (ADS)

Koenig, A. A.; Braithwaite, J. W.; Armijo, J. R.

1988-05-01

Given its potential benefits, the practicality of using a latent heat-storage material as the basis for a passive thermal management system is being assessed by Chloride Silent Power Ltd. (CSPL) with technical assistance from Beta Power, Inc. and Sandia National Laboratories (SNL). Based on the experience gained in large-scale solar energy storage programs, fused salts were selected as the primary candidates for the heat-storage material. The initial phase of this assessment was directed to an EV battery being designed at CSPL for the ETX-II program. Specific tasks included the identification and characterization of potential fused salts, a determination of placement options for the salts within the battery, and an assessment of the ultimate benefit to the battery system. The results obtained to date for each of these tasks are presented in this paper.

Fourth report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loar, J.M.

1994-04-01

In response to a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC) and selected tributaries. BMAP currently consists of six major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring, (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota, (3) biological indicator studies, (4) instream ecological monitoring, (5) assessment of contaminants in the terrestrial environment, andmore » (6) radioecology of WOC and White Oak Lake. The ecological characterization of the WOC watershed will provide baseline data that can be used to document the ecological effects of the water pollution control program and the remedial action program. The long-term nature of BMAP ensures that the effectiveness of remedial measures will be properly evaluated.« less

SHC Project 3.63, Task 2, Beneficial Use of Waste Materials ...

EPA Pesticide Factsheets

SHC Project 3.63, Task 2, “Beneficial Use of Waste Materials”, is designed to conduct research and analyses to characterize and quantify the risks and benefits of using or reusing waste materials. There are 6 primary research areas in Task 2 that cover a broad spectrum of topics germane to the beneficial use of waste materials and address Agency, Office, Region and other client needs. The 6 research areas include: 1) Materials Recovery Technology, 2) Beneficial Use of Materials Optimization, 3) Novel Products from Waste Materials, 4) Land Application of Biosolids, 5) Soil Remediation Amendments and 6) Improved Leaching Methods for More Accurate Prediction of Environmental Release of Metals. The objectives of each research area, their intended products and progress to date will be presented. The products of this Task will enable communities and the Agency to better protect and enhance human health, well-being and the environment for current and future generations, through the reduction in material consumption, reuse, and recycling of materials. This presentation is designed to convey the rational, purpose and planned research in EPAs Safe and Healthy Communities (SHC) National Research Program Project 3.63 (Sustainable Materials Management) Task 2, “Beneficial Use of Waste Materials”, which is designed to conduct research and analyses to characterize and quantify the risks and benefits of using or reusing waste materials. . This presentation has bee

Analysis of nuclear waste disposal in space, phase 3. Volume 1: Executive summary of technical report

NASA Technical Reports Server (NTRS)

Rice, E. E.; Miller, N. E.; Yates, K. R.; Martin, W. E.; Friedlander, A. L.

1980-01-01

The objectives, approach, assumptions, and limitations of a study of nuclear waste disposal in space are discussed with emphasis on the following: (1) payload characterization; (2) safety assessment; (3) health effects assessment; (4) long-term risk assessment; and (5) program planning support to NASA and DOE. Conclusions are presented for each task.

Motor Learning Characterizes Habilitation of Children With Hemiplegic Cerebral Palsy

PubMed Central

Krebs, Hermano I.; Fasoli, Susan E.; Dipietro, Laura; Fragala-Pinkham, Maria; Hughes, Richard; Stein, Joel; Hogan, Neville

2015-01-01

Background This study tested in children with cerebral palsy (CP) whether motor habilitation resembles motor learning. Methods Twelve children with hemiplegic CP ages 5 to 12 years with moderate to severe motor impairments underwent a 16-session robot-mediated planar therapy program to improve upper limb reach, with a focus on shoulder and elbow movements. Participants were trained to execute point-to-point movements (with robot assistance) with the affected arm and were evaluated (without robot assistance) in trained (point-to-point) and untrained (circle-drawing) conditions. Outcomes were measured at baseline, midpoint, immediately after the program, and 1 month postcompletion. Outcome measures were the Fugl-Meyer (FM), Quality of Upper Extremity Skills Test (QUEST), and Modified Ashworth Scale (MAS) scores; parent questionnaire; and robot-based kinematic metrics. To assess whether learning best characterizes motor habilitation in CP, the authors quantified (a) improvement on trained tasks at completion of training (acquisition) and 1 month following completion (retention) and (b) quantified generalization of improvement to untrained tasks. Results After robotic intervention, the authors found significant gains in the FM, QUEST, and parent questionnaire. Robot-based evaluations demonstrated significant improvement in trained movements and that improvement was sustained at follow-up. Furthermore, children improved their performance in untrained movements indicating generalization. Conclusions Motor habilitation in CP exhibits some traits of motor learning. Optimal treatment may not require an extensive repertoire of tasks but rather a select set to promote generalization. PMID:22331211

Frontal theta activation during motor synchronization in autism.

PubMed

Kawasaki, Masahiro; Kitajo, Keiichi; Fukao, Kenjiro; Murai, Toshiya; Yamaguchi, Yoko; Funabiki, Yasuko

2017-11-08

Autism is characterized by two primary characteristics: deficits in social interaction and repetitive behavioral patterns. Because interpersonal communication is extremely complicated, its underlying brain mechanisms remain unclear. Here we showed that both characteristics can be explained by a unifying underlying mechanism related to difficulties with irregularities. To address the issues, we measured electroencephalographm during a cooperative tapping task, which required participants to tap a key alternately and synchronously with constant rhythmic a PC program, a variable rhythmic PC program, or a human partner. We found that people with autism had great difficulty synchronizing tapping behavior with others, and exhibited greater than normal theta-wave (6 Hz) activity in the frontal cortex during the task, especially when their partner behaved somewhat irregularly (i.e. a variable rhythmic PC program or a human partner). Importantly, the higher theta-wave activity was related to the severity of autism, not the performance on the task. This indicates that people with autism need to use intense cognition when trying to adapt to irregular behavior and can easily become overtaxed. Difficulty adapting to irregular behavior in others is likely related to their own tendencies for repetitive and regular behaviors. Thus, while the two characteristics of autism have been comprehended separately, our unifying theory makes understanding the condition and developing therapeutic strategies more tractable.

Design of a video system providing optimal visual information for controlling payload and experiment operations with television

NASA Technical Reports Server (NTRS)

1975-01-01

A program was conducted which included the design of a set of simplified simulation tasks, design of apparatus and breadboard TV equipment for task performance, and the implementation of a number of simulation tests. Performance measurements were made under controlled conditions and the results analyzed to permit evaluation of the relative merits (effectivity) of various TV systems. Burden factors were subsequently generated for each TV system to permit tradeoff evaluation of system characteristics against performance. For the general remote operation mission, the 2-view system is recommended. This system is characterized and the corresponding equipment specifications were generated.

Automated Planning Enables Complex Protocols on Liquid-Handling Robots.

PubMed

Whitehead, Ellis; Rudolf, Fabian; Kaltenbach, Hans-Michael; Stelling, Jörg

2018-03-16

Robotic automation in synthetic biology is especially relevant for liquid handling to facilitate complex experiments. However, research tasks that are not highly standardized are still rarely automated in practice. Two main reasons for this are the substantial investments required to translate molecular biological protocols into robot programs, and the fact that the resulting programs are often too specific to be easily reused and shared. Recent developments of standardized protocols and dedicated programming languages for liquid-handling operations addressed some aspects of ease-of-use and portability of protocols. However, either they focus on simplicity, at the expense of enabling complex protocols, or they entail detailed programming, with corresponding skills and efforts required from the users. To reconcile these trade-offs, we developed Roboliq, a software system that uses artificial intelligence (AI) methods to integrate (i) generic formal, yet intuitive, protocol descriptions, (ii) complete, but usually hidden, programming capabilities, and (iii) user-system interactions to automatically generate executable, optimized robot programs. Roboliq also enables high-level specifications of complex tasks with conditional execution. To demonstrate the system's benefits for experiments that are difficult to perform manually because of their complexity, duration, or time-critical nature, we present three proof-of-principle applications for the reproducible, quantitative characterization of GFP variants.

Considerations and measurements of latent-heat-storage salts for secondary thermal battery applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koenig, A.A.; Braithwaite, J.W.; Armijo, J.R.

Given its potential benefits, the practicality of using a latent heat-storage material as the basis for a passive thermal management system is being assessed by Chloride Silent Power Ltd. (CSPL) with technical assistance from Beta Power, Inc. and Sandia National Laboratories (SNL). Based on the experience gained in large-scale solar energy storage programs, fused salts were selected as the primary candidates for the heat-storage material. The initial phase of this assessment was directed to an EV battery being designed at CSPL for the ETX-II program. Specific tasks included the identification and characterization of potential fused salts, a determination of placementmore » options for the salts within the battery, and an assessment of the ultimate benefit to the battery system. The results obtained to date for each of these tasks are presented in this paper.« less

Training and Personnel Systems Technology R and D Program Description FY 93

DTIC Science & Technology

1992-07-24

instructional strategies provide the best training in ICAT applications, and (c) demonstration of microcomputer authoring techniques for rapid development...learning strategies for language training, (b) develop a behavioral taxonomy to evaluate Military Intelligence (MI) performance and to characterize the...training requirements for collective tasks. In FY93, plans are to: (a) develop training strategies for sustaining command and control skills, and (b

Application Characterization at Scale: Lessons learned from developing a distributed Open Community Runtime system for High Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landwehr, Joshua B.; Suetterlein, Joshua D.; Marquez, Andres

2016-05-16

Since 2012, the U.S. Department of Energy’s X-Stack program has been developing solutions including runtime systems, programming models, languages, compilers, and tools for the Exascale system software to address crucial performance and power requirements. Fine grain programming models and runtime systems show a great potential to efficiently utilize the underlying hardware. Thus, they are essential to many X-Stack efforts. An abundant amount of small tasks can better utilize the vast parallelism available on current and future machines. Moreover, finer tasks can recover faster and adapt better, due to a decrease in state and control. Nevertheless, current applications have been writtenmore » to exploit old paradigms (such as Communicating Sequential Processor and Bulk Synchronous Parallel processing). To fully utilize the advantages of these new systems, applications need to be adapted to these new paradigms. As part of the applications’ porting process, in-depth characterization studies, focused on both application characteristics and runtime features, need to take place to fully understand the application performance bottlenecks and how to resolve them. This paper presents a characterization study for a novel high performance runtime system, called the Open Community Runtime, using key HPC kernels as its vehicle. This study has the following contributions: one of the first high performance, fine grain, distributed memory runtime system implementing the OCR standard (version 0.99a); and a characterization study of key HPC kernels in terms of runtime primitives running on both intra and inter node environments. Running on a general purpose cluster, we have found up to 1635x relative speed-up for a parallel tiled Cholesky Kernels on 128 nodes with 16 cores each and a 1864x relative speed-up for a parallel tiled Smith-Waterman kernel on 128 nodes with 30 cores.« less

Harsh-Environment Solid-State Gamma Detector for Down-hole Gas and Oil Exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter Sandvik; Stanislav Soloviev; Emad Andarawis

2007-08-10

The goal of this program was to develop a revolutionary solid-state gamma-ray detector suitable for use in down-hole gas and oil exploration. This advanced detector would employ wide-bandgap semiconductor technology to extend the gamma sensor's temperature capability up to 200 C as well as extended reliability, which significantly exceeds current designs based on photomultiplier tubes. In Phase II, project tasks were focused on optimization of the final APD design, growing and characterizing the full scintillator crystals of the selected composition, arranging the APD device packaging, developing the needed optical coupling between scintillator and APD, and characterizing the combined elements asmore » a full detector system preparing for commercialization. What follows is a summary report from the second 18-month phase of this program.« less

Quantifying the Financial Benefits of Multifamily Retrofits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Philbrick, D.; Scheu, R.; Brand, L.

Increasing the adoption of energy efficient building practices will require the energy sector to increase their understanding of the way that retrofits affect multifamily financial performance as well as how those indicators are interpreted by the lending and appraisal industries. This project analyzed building, energy, and financial program data as well as other public and private data to examine the relationship between energy efficiency retrofits and financial performance on three levels: building, city, and community. The project goals were to increase the data and analysis in the growing body of multifamily financial benefits work as well provide a framework formore » other geographies to produce similar characterization. The goals are accomplished through three tasks. Task one: A pre- and post-retrofit analysis of thirteen Chicago multifamily buildings. Task two: A comparison of Chicago income and expenses to two national datasets. Task three: An in-depth look at multifamily market sales data and the subsequent impact of buildings that undergo retrofits.« less

Building America Case Study: Quantifying the Financial Benefits of Multifamily Retrofits, Chicago, Illinois

DOE Office of Scientific and Technical Information (OSTI.GOV)

Increasing the adoption of energy efficient building practices will require the energy sector to increase their understanding of the way that retrofits affect multifamily financial performance as well as how those indicators are interpreted by the lending and appraisal industries. This project analyzed building, energy, and financial program data as well as other public and private data to examine the relationship between energy efficiency retrofits and financial performance on three levels: building, city, and community. The project goals were to increase the data and analysis in the growing body of multifamily financial benefits work as well provide a framework formore » other geographies to produce similar characterization. The goals are accomplished through three tasks: Task one: A pre- and post-retrofit analysis of thirteen Chicago multifamily buildings. Task two: A comparison of Chicago income and expenses to two national datasets. Task three: An in-depth look at multifamily market sales data and the subsequent impact of buildings that undergo retrofits.« less

LOCO: Characterization of Phytoplankton in Thin Optical Layers

DTIC Science & Technology

2010-09-30

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) University of Rhode Island,Graduate School of Oceanography,South Ferry Road,Narragansett,RI,02882-1197 8. PERFORMING ORGANIZATION REPORT...population was superimposed on a diverse background of other planktonic organisms , some of which also underwent vertical migration, and others (e.g

Development Context Driven Change Awareness and Analysis Framework

NASA Technical Reports Server (NTRS)

Sarma, Anita; Branchaud, Josh; Dwyer, Matthew B.; Person, Suzette; Rungta, Neha

2014-01-01

Recent work on workspace monitoring allows conflict prediction early in the development process, however, these approaches mostly use syntactic differencing techniques to compare different program versions. In contrast, traditional change-impact analysis techniques analyze related versions of the program only after the code has been checked into the master repository. We propose a novel approach, De- CAF (Development Context Analysis Framework), that leverages the development context to scope a change impact analysis technique. The goal is to characterize the impact of each developer on other developers in the team. There are various client applications such as task prioritization, early conflict detection, and providing advice on testing that can benefit from such a characterization. The DeCAF framework leverages information from the development context to bound the iDiSE change impact analysis technique to analyze only the parts of the code base that are of interest. Bounding the analysis can enable DeCAF to efficiently compute the impact of changes using a combination of program dependence and symbolic execution based approaches.

Development Context Driven Change Awareness and Analysis Framework

NASA Technical Reports Server (NTRS)

Sarma, Anita; Branchaud, Josh; Dwyer, Matthew B.; Person, Suzette; Rungta, Neha; Wang, Yurong; Elbaum, Sebastian

2014-01-01

Recent work on workspace monitoring allows conflict prediction early in the development process, however, these approaches mostly use syntactic differencing techniques to compare different program versions. In contrast, traditional change-impact analysis techniques analyze related versions of the program only after the code has been checked into the master repository. We propose a novel approach, DeCAF (Development Context Analysis Framework), that leverages the development context to scope a change impact analysis technique. The goal is to characterize the impact of each developer on other developers in the team. There are various client applications such as task prioritization, early conflict detection, and providing advice on testing that can benefit from such a characterization. The DeCAF framework leverages information from the development context to bound the iDiSE change impact analysis technique to analyze only the parts of the code base that are of interest. Bounding the analysis can enable DeCAF to efficiently compute the impact of changes using a combination of program dependence and symbolic execution based approaches.

Avionic architecture requirements for Space Exploration Initiative systems

NASA Technical Reports Server (NTRS)

Herbella, C. G.; Brown, D. C.

1991-01-01

The authors discuss NASA's Strategic Avionics Technology Working Group (SATWG) and the results of the first study commissioned by the SATWG, the Space Avionics Requirements Study (SARS). The goal of the SARS task was to show that an open avionics architecture, using modular, standardized components, could be applied across the wide range of systems that comprise the Space Exploration Initiative. The study addressed systems ranging from expendable launch vehicles and the space station to surface systems such as Mars or lunar rovers and habitats. Top-level avionics requirements were derived from characterizations of each of the systems considered. Then a set of avionics subsystems were identified, along with estimates of the numbers and types of modules needed to meet the requirements. Applicability of these results across the infrastructure was then illustrated. In addition to these tasks, critical technologies were identified, characterized, and assessed in terms of their criticality and impact on the program. Design, development, test, and evaluation methods were addressed to identify potential areas of improvement.

a Recursive Approach to Compute Normal Forms

NASA Astrophysics Data System (ADS)

HSU, L.; MIN, L. J.; FAVRETTO, L.

2001-06-01

Normal forms are instrumental in the analysis of dynamical systems described by ordinary differential equations, particularly when singularities close to a bifurcation are to be characterized. However, the computation of a normal form up to an arbitrary order is numerically hard. This paper focuses on the computer programming of some recursive formulas developed earlier to compute higher order normal forms. A computer program to reduce the system to its normal form on a center manifold is developed using the Maple symbolic language. However, it should be stressed that the program relies essentially on recursive numerical computations, while symbolic calculations are used only for minor tasks. Some strategies are proposed to save computation time. Examples are presented to illustrate the application of the program to obtain high order normalization or to handle systems with large dimension.

Argobots: A Lightweight Low-Level Threading and Tasking Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seo, Sangmin; Amer, Abdelhalim; Balaji, Pavan

In the past few decades, a number of user-level threading and tasking models have been proposed in the literature to address the shortcomings of OS-level threads, primarily with respect to cost and flexibility. Current state-of-the-art user-level threading and tasking models, however, either are too specific to applications or architectures or are not as powerful or flexible. In this paper, we present Argobots, a lightweight, low-level threading and tasking framework that is designed as a portable and performant substrate for high-level programming models or runtime systems. Argobots offers a carefully designed execution model that balances generality of functionality with providing amore » rich set of controls to allow specialization by end users or high-level programming models. We describe the design, implementation, and performance characterization of Argobots and present integrations with three high-level models: OpenMP, MPI, and colocated I/O services. Evaluations show that (1) Argobots, while providing richer capabilities, is competitive with existing simpler generic threading runtimes; (2) our OpenMP runtime offers more efficient interoperability capabilities than production OpenMP runtimes do; (3) when MPI interoperates with Argobots instead of Pthreads, it enjoys reduced synchronization costs and better latency-hiding capabilities; and (4) I/O services with Argobots reduce interference with colocated applications while achieving performance competitive with that of a Pthreads approach.« less

[Computers in biomedical research: I. Analysis of bioelectrical signals].

PubMed

Vivaldi, E A; Maldonado, P

2001-08-01

A personal computer equipped with an analog-to-digital conversion card is able to input, store and display signals of biomedical interest. These signals can additionally be submitted to ad-hoc software for analysis and diagnosis. Data acquisition is based on the sampling of a signal at a given rate and amplitude resolution. The automation of signal processing conveys syntactic aspects (data transduction, conditioning and reduction); and semantic aspects (feature extraction to describe and characterize the signal and diagnostic classification). The analytical approach that is at the basis of computer programming allows for the successful resolution of apparently complex tasks. Two basic principles involved are the definition of simple fundamental functions that are then iterated and the modular subdivision of tasks. These two principles are illustrated, respectively, by presenting the algorithm that detects relevant elements for the analysis of a polysomnogram, and the task flow in systems that automate electrocardiographic reports.

San Joaquin River Up-Stream DO TMDL Project Task 4: MonitoringStudy Interim Task Report #3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stringfellow, William; Borglin, Sharon; Dahlgren, Randy

2007-03-30

The purpose of the Dissolved Oxygen Total Maximum Daily LoadProject (DO TMDLProject) is to provide a comprehensive understanding ofthe sources and fate of oxygen consuming materials in the San JoaquinRiver (SJR) watershed between Channel Point and Lander Avenue (upstreamSJR). When completed, this study will provide the stakeholders anunderstanding of the baseline conditions of the basin, provide input foran allocation decision, and provide the stakeholders with a tool formeasuring the impact of any waterquality management program that may beimplemented as part of the DO TMDL process. Previous studies haveidentified algal biomass as the most significant oxygen-demandingsubstance in the DO TMDL Projectmore » study-area between of Channel Point andLander Ave onthe SJR. Other oxygen-demanding substances found in theupstream SJR include ammonia and organic carbon from sources other thanalgae. The DO TMDL Project study-area contains municipalities, dairies,wetlands, cattle ranching, irrigated agriculture, and industries thatcould potentially contribute biochemical oxygen demand (BOD) to the SJR.This study is designed to discriminate between algal BOD and othersources of BOD throughout the entire upstream SJR watershed. Algalbiomass is not a conserved substance, but grows and decays in the SJR;hence, characterization of oxygen-demanding substances in the SJR isinherently complicated and requires an integrated effort of extensivemonitoring, scientific study, and modeling. In order to achieve projectobjectives, project activities were divided into a number of Tasks withspecific goals and objectives. In this report, we present the results ofmonitoring and research conducted under Task 4 of the DO TMDL Project.The major objective of Task 4 is to collect sufficient hydrologic (flow)and water quality (WQ) data to characterize the loading of algae, otheroxygen-demanding materials, and nutrients fromindividual tributaries andsub-watersheds of the upstream SJR between Mossdale and Lander Avenue.This data is specifically being collected to provide data for the Task 6Modeling effort. Task 4 provides input and calibration data for flow andWQ modeling associated with the low DO problems in the SJR watershed,including modeling on the linkage among nutrients, algae, and low DO.Task 4 is providing a higher volume of high quality and coherent data tothe modeling team than was available in the past for the upstream SJR.The monitoring and research activities under Task 4 are integrated withthe Modeling effort (Task 6) and are not designed to be a stand aloneprogram. Although, the majority of analysis of the Task 4 data isoccurring as part of the Task 6 Modeling program, analysis of Task 4 dataindependently of the modeling effort is also an important component ofthe DO TMDL Project effort. In this report, we present the results ofmonitoring and research conducted under Task 4. The major purposes ofthis report are to 1) document activities undertaken as part of theDOTMDL Project; 2) organize electronic data for delivery to Stateagencies, stakeholders and principal investigators (cooperators) on theDO TMDL Project; 3) provide a summary analysis of the data for referenceand to assist stakeholders in planning watershed activities inresponse tothe DO TMDL requirements; and 5) provide a preliminary scientificinterpretation independently of the Task 6 Modeling effort. Due to theextensive scope of theTask 4 portion of the DO TMDL Project, the Task 4March 2007 Interim Report is divided into a numbers of chapters andassociated appendixes designed to be able to stand1-3 independently ofeach other. The purpose of this chapter is to provide an overview of Task4 data collection and to explain the structure of the overallreport.« less

Environmental research on a modified in situ oil shale task process. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-05-01

This report summarizes the progress of the US Department of Energy's Oil Shale Task Force in its research program at the Occidental Oil Shale, Inc. facility at Logan Wash, Colorado. More specifically, the Task Force obtained samples from Retort 3E and Retort 6 and submitted these samples to a variety of analyses. The samples collected included: crude oil (Retort 6); light oil (Retort 6); product water (Retort 6); boiler blowdown (Retort 6); makeup water (Retort 6); mine sump water; groundwater; water from Retorts 1 through 5; retort gas (Retort 6); mine air; mine dust; and spent shale core (Retort 3E).more » The locations of the sampling points and methods used for collection and storage are discussed in Chapter 2 (Characterization). These samples were then distributed to the various laboratories and universities participating in the Task Force. For convenience in organizing the data, it is useful to group the work into three categories: Characterization, Leaching, and Health Effects. While many samples still have not been analyzed and much of the data remains to be interpreted, there are some preliminary conclusions the Task Force feels will be helpful in defining future needs and establishing priorities. It is important to note that drilling agents other than water were used in the recovery of the core from Retort 3E. These agents have been analyzed (see Table 12 in Chapter 2) for several constituents of interest. As a result some of the analyses of this core sample and leachates must be considered tentative.« less

Research pressure instrumentation for NASA Space Shuttle main engine, modification no. 5

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1984-01-01

The objective of the research project described is to define and demonstrate methods to advance the state of the art of pressure sensors for the space shuttle main engine (SSME). Silicon piezoresistive technology was utilized in completing tasks: generation and testing of three transducer design concepts for solid state applications; silicon resistor characterization at cryogenic temperatures; experimental chip mounting characterization; frequency response optimization and prototype design and fabrication. Excellent silicon sensor performance was demonstrated at liquid nitrogen temperature. A silicon resistor ion implant dose was customized for SSME temperature requirements. A basic acoustic modeling software program was developed as a design tool to evaluate frequency response characteristics.

Characterizing the Quality Workforce in Private U.S. Child and Family Behavioral Health Agencies.

PubMed

McMillen, J Curtis; Raffol, Matthew

2016-09-01

Behavioral health agencies have been encouraged to monitor performance and improve service quality. This paper characterizes the workforce charged with these tasks through a national survey of 238 behavioral health quality professionals. A latent class analysis suggests only 30 % of these workers report skills in both basic research and quality-specific skills. Respondents wanted to learn a variety of research and data analytic skills. The results call into question the quality of data collected in behavioral health agencies and the conclusions agencies are drawing from their data. Professional school and continuing education programs are needed to prepare this workforce.

The Department of the Navy Systems Engineering Career Competency Model (SECCM)

DTIC Science & Technology

2015-05-13

Respond 71% Value 18% Organize 3% Characterize 4% Affective Domain Total KSAs : 869 ENG Career Field Competency Model 10 1.0 Mission Level...The Department of the Navy Systems Engineering Career Competency Model (SECCM) 2015 Acquisition Symposium Naval Postgraduate School Monterey...Career Competency Model (SECCM) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER

Characterizing Resilience and Growth Among Soldiers: A Trajectory Study

DTIC Science & Technology

2014-04-01

0120 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Nansook Park 5e. TASK NUMBER e -mail: nspak@umich.edu 5f. WORK UNIT NUMBER 7...tried all available methods to reach potential participants including e -mail, regular mail, phone and social media like Facebook. We were able to...utilize all possible ways of contacting participants including e -mail, regular mail, phone calls, and social media (e.g., Facebook). Furthermore

Determining Behavioral Task Content of the Curriculum in Occupational and Professional Education Programs: The Dental Auxiliaries. Final Report.

ERIC Educational Resources Information Center

Terry, David R.; Evans, Rupert N.

The document is the final report of a project to develop a suitable method for studying the task content of accredited dental auxiliary education programs and the relationship between the tasks taught in such programs and the tasks involved in a professional situation. The set of instruments developed and pilot tested in 63 programs was used to…

Application of CFCC technology to hot gas filtration applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richlen, S.

1995-06-01

Discussion will feature high temperature filter development under the DOE`s Office of Industrial Technologies Continuous Fiber Ceramic Composite (CFCC) Program. Within the CFCC Program there are four industry projects and a national laboratory technology support project. Atlantic Research, Babcock & Wilcox, DuPont Lanxide Composites, and Textron are developing processing methods to produce CFCC Components with various types of matrices and composites, along with the manufacturing methods to produce industrial components, including high temperature gas filters. The Oak Ridge National Laboratory is leading a National Laboratory/University effort to increase knowledge of such generic and supportive technology areas as environmental degradation, measurementmore » of mechanical properties, long-term performance, thermal shock and thermal cycling, creep and fatigue, and non-destructive characterization. Tasks include composite design, materials characterization, test methods, and performance-related phenomena, that will support the high temperature filter activities of industry and government.« less

Development of a task-level robot programming and simulation system

NASA Technical Reports Server (NTRS)

Liu, H.; Kawamura, K.; Narayanan, S.; Zhang, G.; Franke, H.; Ozkan, M.; Arima, H.; Liu, H.

1987-01-01

An ongoing project in developing a Task-Level Robot Programming and Simulation System (TARPS) is discussed. The objective of this approach is to design a generic TARPS that can be used in a variety of applications. Many robotic applications require off-line programming, and a TARPS is very useful in such applications. Task level programming is object centered in that the user specifies tasks to be performed instead of robot paths. Graphics simulation provides greater flexibility and also avoids costly machine setup and possible damage. A TARPS has three major modules: world model, task planner and task simulator. The system architecture, design issues and some preliminary results are given.

Development of advanced fuel cell system, phase 2

NASA Technical Reports Server (NTRS)

Handley, L. M.; Meyer, A. P.; Bell, W. F.

1973-01-01

A multiple task research and development program was performed to improve the weight, life, and performance characteristics of hydrogen-oxygen alkaline fuel cells for advanced power systems. Development and characterization of a very stable gold alloy catalyst was continued from Phase I of the program. A polymer material for fabrication of cell structural components was identified and its long term compatibility with the fuel cell environment was demonstrated in cell tests. Full scale partial cell stacks, with advanced design closed cycle evaporative coolers, were tested. The characteristics demonstrated in these tests verified the feasibility of developing the engineering model system concept into an advanced lightweight long life powerplant.

Task-level robot programming: Integral part of evolution from teleoperation to autonomy

NASA Technical Reports Server (NTRS)

Reynolds, James C.

1987-01-01

An explanation is presented of task-level robot programming and of how it differs from the usual interpretation of task planning for robotics. Most importantly, it is argued that the physical and mathematical basis of task-level robot programming provides inherently greater reliability than efforts to apply better known concepts from artificial intelligence (AI) to autonomous robotics. Finally, an architecture is presented that allows the integration of task-level robot programming within an evolutionary, redundant, and multi-modal framework that spans teleoperation to autonomy.

Startle reveals an absence of advance motor programming in a Go/No-go task.

PubMed

Carlsen, Anthony N; Chua, Romeo; Dakin, Chris J; Sanderson, David J; Inglis, J Timothy; Franks, Ian M

2008-03-21

Presenting a startling stimulus in a simple reaction time (RT) task, can involuntarily trigger the pre-programmed response. However, this effect is not seen when the response is programmed following the imperative stimulus (IS) providing evidence that a startle can only trigger pre-programmed responses. In a "Go/No-go" (GNG) RT task the response may be programmed in advance of the IS because there exists only a single predetermined response. The purpose of the current investigation was to examine if startle could elicit a response in a GNG task. Participants completed a wrist extension task in response to a visual stimulus. A startling acoustic stimulus (124dB) was presented in both Go and No-go trials with Go probability manipulated between groups. The inclusion of a startle did not significantly speed RT and led to more response errors. This result is similar to that observed in a startled choice RT task, indicating that in a GNG task participants waited until the IS complete motor programming.

Attentional impairments in Huntington's disease: A specific deficit for the executive conflict.

PubMed

Maurage, Pierre; Heeren, Alexandre; Lahaye, Magali; Jeanjean, Anne; Guettat, Lamia; Verellen-Dumoulin, Christine; Halkin, Stéphane; Billieux, Joël; Constant, Eric

2017-05-01

Huntington's disease (HD) is characterized by motor and cognitive impairments including memory, executive, and attentional functions. However, because earlier studies relied on multidetermined attentional tasks, uncertainty still abounds regarding the differential deficit across attentional subcomponents. Likewise, the evolution of these deficits during the successive stages of HD remains unclear. The present study simultaneously explored 3 distinct networks of attention (alerting, orienting, executive conflict) in preclinical and clinical HD. Thirty-eight HD patients (18 preclinical) and 38 matched healthy controls completed the attention network test, an integrated and theoretically grounded task assessing the integrity of 3 attentional networks. Preclinical HD was not characterized by any attentional deficit compared to controls. Conversely, clinical HD was associated with a differential deficit across the 3 attentional networks under investigation, showing preserved performance for alerting and orienting networks but massive and specific impairment for the executive conflict network. This indexes an impaired use of executive control to resolve the conflict between task-relevant stimuli and interfering task-irrelevant ones. Clinical HD does not lead to a global attentional deficit but rather to a specific impairment for the executive control of attention. Moreover, the absence of attentional deficits in preclinical HD suggests that these deficits are absent at the initial stages of the disease. In view of their impact on everyday life, attentional deficits should be considered in clinical contexts. Therapeutic programs improving the executive control of attention by neuropsychology and neuromodulation should be promoted. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Optical Characterization of Pulse Laser Deposition of Thin Films of Hard Materials Using RHEED and AFM Techniques

DTIC Science & Technology

2011-12-20

diamond thin-film generation. PLD is initiated by laser ablation, which is essentially evaporation of a material by a high - powered laser. Subsequently...COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION

Characterization of Steroid Receptor RNA Activator Protein Function in Modulating the Estrogen Signaling Pathway

DTIC Science & Technology

2007-05-01

Signaling Pathway 5b. GRANT NUMBER W81XWH-05-1-0245 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Yi Yan 5e. TASK NUMBER...negative control to identify proteins non-specifically precipitated. Tandem mass spectrometric analysis of immunoprecipitated samples identified a...immunoprecipitated sample and negative control. It is important to note that, SRAP was present among the remaining specifically precipitated 87 proteins. Using the

Robust Littoral Characterization using Electro-Optical Sensors

DTIC Science & Technology

2011-09-30

be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number . 1...Electro-Optical Sensors 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT... NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Orgeon State University,COAS,104 Ocean Admin Bldg,Corvallis,OR,97331-5503 8. PERFORMING

High-pressure LOX/hydrocarbon preburners and gas generators

NASA Technical Reports Server (NTRS)

Huebner, A. W.

1981-01-01

The objective of the program was to conduct a small scale hardware test program to establish the technology base required for LOX/hydrocarbon preburners and gas generators. The program consisted of six major tasks; Task I reviewed and assessed the performance prediction models and defined a subscale test program. Task II designed and fabricated this subscale hardware. Task III tested and analyzed the data from this hardware. Task IV analyzed the hot fire results and formulated a preliminary design for 40K preburner assemblies. Task V took the preliminary design and detailed and fabricated three 40K size preburner assemblies, one each fuel-rich LOX/CH, and LOX/RP-1 and one oxidizer rich LOX/CH4. Task VI delivered these preburner assemblies to MSFC for subsequent evaluation.

Automatic topics segmentation for TV news video

NASA Astrophysics Data System (ADS)

Hmayda, Mounira; Ejbali, Ridha; Zaied, Mourad

2017-03-01

Automatic identification of television programs in the TV stream is an important task for operating archives. This article proposes a new spatio-temporal approach to identify the programs in TV stream into two main steps: First, a reference catalogue for video features visual jingles built. We operate the features that characterize the instances of the same program type to identify the different types of programs in the flow of television. The role of video features is to represent the visual invariants for each visual jingle using appropriate automatic descriptors for each television program. On the other hand, programs in television streams are identified by examining the similarity of the video signal for visual grammars in the catalogue. The main idea of the identification process is to compare the visual similarity of the video signal features in the flow of television to the catalogue. After presenting the proposed approach, the paper overviews encouraging experimental results on several streams extracted from different channels and compounds of several programs.

Process Versus Task in Social Planning

ERIC Educational Resources Information Center

Gilbert, Neil; Specht, Harry

1977-01-01

For several decades, the relative importance of process as opposed to task has been an issue in the literature. This study of the Model Cities program examines the relationship between program outcomes and the process and task orientations of program planners. (Author)

Development of polyphenylquinoxaline graphite composites

NASA Technical Reports Server (NTRS)

Hoggatt, J. T.; Hill, S. G.; Shdo, J. G.

1974-01-01

This exploratory program was divided into four basic tasks. The initial phase was devoted toward investigating processing variables associated with previously developed PPO resins. These polymers were derived from p-bis(phenyl glyoxalyl)benzene reacted with 3,3'-diamino benzidine and/or 3,3',4,4'-tetramino benzophenone. Four new phenyl quinoxaline polymers were synthesized and characterized in Tasks 2 and 3. These consisted of a hydroxyl group containing PPQ synthesized from 3,3'-diamino benzidine (DAB), m-bis(phenyl glyoxal)benzene and m-bis(p'-hydroxy phenyl glyoxalyl) benzene; a cyano group containing PPQ from the reaction of DAB and p-bis(p'-cyano phenoxy phenyl glyoxalyl)benzene; an end-capped block copolymer; and a polymer from the reaction of 3,3',4,4'-tetraamino benzo phenone and m-bis(phenyl glyoxalyl)benzene. The latter two polymers were chosen for composite studies in the latter two tasks of the program. Mechanical properties of the graphite reinforced PPQ composites were determined over the temperature range of +21 C to 316 C. Flexural strengths of the HMS graphite fiber composites were in excess of 8.97 X 10 to the 8th power N/sq m (130,000 psi) at +21 C (70 F) with over 50% strength retention at +316 C.

Materials processing in space programs tasks. [NASA research tasks

NASA Technical Reports Server (NTRS)

Pentecost, E.

1981-01-01

Active research tasks as of the end of fiscal year 1981 of the materials processing in space program, NASA Office of Space and Terrestrial Applications are summarized to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The program, its history, strategy, and overall goal are described the organizational structures and people involved are identified and a list of recent publications is given for each research task. Four categories: Crystal Growth; Solidification of Metals, Alloys, and Composites; Fluids, Transports, and Chemical Processes, and Ultrahigh Vacuum and Containerless Processing Technologies are used to group the tasks. Some tasks are placed in more than one category to insure complete coverage of each category.

Technology Reinvestment Project Manufacturing Education and Training. Volume 1

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Bond, Arthur J.

1997-01-01

The manufacturing education program is a joint program between the University of Alabama in Huntsville's (UAH) College of Engineering and Alabama A&M University's (AAMLJ) School of Engineering and Technology. The objective of the program is to provide more hands-on experiences to undergraduate engineering and engineering technology students. The scope of work consisted of. Year 1, Task 1: Review courses at Alabama Industrial Development Training (AIDT); Task 2: Review courses at UAH and AAMU; Task 3: Develop new lab manuals; Task 4: Field test manuals; Task 5: Prepare annual report. Year 2, Task 1: Incorporate feedback into lab manuals; Task 2 : Introduce lab manuals into classes; Task 3: Field test manuals; Task 4: Prepare annual report. Year 3, Task 1: Incorporate feedback into lab manuals; Task 2: Introduce lab manuals into remaining classes; Task 3: Conduct evaluation with assistance of industry; Task 4: Prepare final report. This report only summarizes the activities of the University of Alabama in Huntsville. The activities of Alabama A&M University are contained in a separate report.

Integrated Thermal Protection Systems and Heat Resistant Structures

NASA Technical Reports Server (NTRS)

Pichon, Thierry; Lacoste, Marc; Barreteau, R.; Glass, David E.

2006-01-01

In the early stages of NASA's Exploration Initiative, Snecma Propulsion Solide was funded under the Exploration Systems Research & Technology program to develop a CMC heatshield, a deployable decelerator, and an ablative heat shield for reentry vehicles. Due to changes within NASA's Exploration Initiative, this task was cancelled in early FY06. This paper will give an overview of the work that was accomplished prior to cancellation. The Snecma team consisted of MT Aerospace, Germany, and Materials Research & Design (MR&D), NASA Langley, NASA Dryden, and NASA Ames in the United States. An Apollo-type capsule was chosen as the reference vehicle for the work. NASA Langley generated the trajectory and aerothermal loads. Snecma and MT Aerospace began the design of a ceramic aft heatshield (CAS) utilizing C/SiC panels as the capsule heatshield. MR&D led the design of a C/SiC deployable decelerator, NASA Ames led the characterization of several ablators, NASA Dryden led the development of a heath management system and the high temperature structures testing, and NASA Langley led the insulation characterization. Though the task was pre-maturely cancelled, a significant quantity of work was accomplished.

Technology Insertion-Engineering Services Process Characterization, Task Order Number 1. Volume 5. Revision A

DTIC Science & Technology

1989-12-22

and Floor Space Utilization for the Arc Weld and Heat Treat Shop," proposes that a bridge crane be installed in this area to move large heavy parts...levels. It is difficult to quantify the effects of this environment, but they certainly include increased stress and lowered productivity. 8.1.1.3...team study, under the QP4 program. While MABPSA makes some use of powered material handling equipment (forklift trucks and overhead cranes ) most

Toxic Chemicals in the Soil Environment. Volume 1. Chemical Properties and Characterization of Soils

DTIC Science & Technology

1985-06-01

ORGANIZATION NAME 4,ND ADJR$55 10. PROGRAM ELEMENT, PROJECT, TASK AREA I WORK UNIT NUMBERS I’t iso.:m - w.XI okla’ýoria t~t { iti i’.water, &’ k 1...and relative sizes of ions commonly occurring in phyllosilicates ... ....... .... 12 The tet:ahedron formed by coordination of Si by four oxvgens...12 3 The octahedron formed by coordination of a cation by six oxygens ................. ...... . . 13 4 Linked Si 60 rings

Campus Life and the Development of Postsecondary Deaf and Hard of Hearing Students: Principles and Practices. [A Report of the] National Task Force on Quality of Services in the Postsecondary Education of Deaf and Hard of Hearing Students.

ERIC Educational Resources Information Center

Porter, Jeff; Camerlengo, Renee; DePuye, Maggie; Sommer, Mark

This report discusses the needs of postsecondary education students who are deaf or hard of hearing and presents strategies for ensuring educational accessibility to campus services and programs. Part 1 considers general issues which characterize the process of student development in postsecondary education. It closes with the a brief discussion…

Tansmutation Research program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seidler, Paul

2011-07-31

Six years of research was conducted for the United States Department of Energy, Office of Nuclear Energy between the years of 2006 through 2011 at the University of Nevada, Las Vegas (UNLV). The results of this research are detailed in the narratives for tasks 1-45. The work performed spanned the range of experimental and modeling efforts. Radiochemistry (separations, waste separation, nuclear fuel, remote sensing, and waste forms) , material fabrication, material characterization, corrosion studies, nuclear criticality, sensors, and modeling comprise the major topics of study during these six years.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, A

Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growingmore » U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing lessons learned Task 3: PV Codes and Standards 1. Serve as the national lead for development and preparation of all proposals (related to PV) to the National Electrical Code 2. Participate in the Standards Technical Panels for modules (UL1703) and inverters (UL1741) Task 4: Assess Inverter Long Term Reliability 1. Install and monitor identical inverters at SWRES and SERES 2. Operate and monitor all inverters for 5 years, characterizing all failures and performance trends Task 5: Test and Evaluation Support for Solar America Initiative 1. Provide test and evaluation services to the National Laboratories for stage gate and progress measurements of SAI TPP winners« less

Supplier's Status for Critical Solid Propellants, Explosive, and Pyrotechnic Ingredients

NASA Technical Reports Server (NTRS)

Sims, B. L.; Painter, C. R.; Nauflett, G. W.; Cramer, R. J.; Mulder, E. J.

2000-01-01

In the early 1970's a program was initiated at the Naval Surface Warfare Center/Indian Head Division (NSWC/IHDIV) to address the well-known problems associated with availability and suppliers of critical ingredients. These critical ingredients are necessary for preparation of solid propellants and explosives manufactured by the Navy. The objective of the program was to identify primary and secondary (or back-up) vendor information for these critical ingredients, and to develop suitable alternative materials if an ingredient is unavailable. In 1992 NSWC/IHDIV funded Chemical Propulsion Information Agency (CPIA) under a Technical Area Task (TAT) to expedite the task of creating a database listing critical ingredients used to manufacture Navy propellant and explosives based on known formulation quantities. Under this task CPIA provided employees that were 100 percent dedicated to the task of obtaining critical ingredient suppliers information, selecting the software and designing the interface between the computer program and the database users. TAT objectives included creating the Explosive Ingredients Source Database (EISD) for Propellant, Explosive and Pyrotechnic (PEP) critical elements. The goal was to create a readily accessible database, to provide users a quick-view summary of critical ingredient supplier's information and create a centralized archive that CPIA would update and distribute. EISD funding ended in 1996. At that time, the database entries included 53 formulations and 108 critical used to manufacture Navy propellant and explosives. CPIA turned the database tasking back over to NSWC/IHDIV to maintain and distribute at their discretion. Due to significant interest in propellant/explosives critical ingredients suppliers' status, the Propellant Development and Characterization Subcommittee (PDCS) approached the JANNAF Executive committee (EC) for authorization to continue the critical ingredient database work. In 1999, JANNAF EC approved the PDCS panel task. This paper is designed to emphasize the necessity of maintaining a JANNAF community supported database, which monitors PEP critical ingredient suppliers' status. The final product of this task is a user friendly, searchable database that provides a quick-view summary of critical ingredient supplier's information. This database must be designed to serve the needs of JANNAF and the propellant and energetic commercial manufacturing community as well. This paper provides a summary of the type of information to archive each critical ingredient.

SOIL AND SEDIMENT SAMPLING METHODS | Science ...

EPA Pesticide Factsheets

The EPA Office of Solid Waste and Emergency Response's (OSWER) Office of Superfund Remediation and Technology Innovation (OSRTI) needs innovative methods and techniques to solve new and difficult sampling and analytical problems found at the numerous Superfund sites throughout the United States. Inadequate site characterization and a lack of knowledge of surface and subsurface contaminant distributions hinders EPA's ability to make the best decisions on remediation options and to conduct the most effective cleanup efforts. To assist OSWER, NERL conducts research to improve their capability to more accurately, precisely, and efficiently characterize Superfund, RCRA, LUST, oil spills, and brownfield sites and to improve their risk-based decision making capabilities, research is being conducted on improving soil and sediment sampling techniques and improving the sampling and handling of volatile organic compound (VOC) contaminated soils, among the many research programs and tasks being performed at ESD-LV.Under this task, improved sampling approaches and devices will be developed for characterizing the concentration of VOCs in soils. Current approaches and devices used today can lose up to 99% of the VOCs present in the sample due inherent weaknesses in the device and improper/inadequate collection techniques. This error generally causes decision makers to markedly underestimate the soil VOC concentrations and, therefore, to greatly underestimate the ecological

Integrated Thermal Protection Systems and Heat Resistant Structures

NASA Technical Reports Server (NTRS)

Pichon, Thierry; Lacoste, Marc; Glass, David E.

2006-01-01

In the early stages of NASA's Exploration Initiative, Snecma Propulsion Solide was funded under the Exploration Systems Research & Technology program to develop integrated thermal protection systems and heat resistant structures for reentry vehicles. Due to changes within NASA's Exploration Initiative, this task was cancelled early. This presentation provides an overview of the work that was accomplished prior to cancellation. The Snecma team chose an Apollo-type capsule as the reference vehicle for the work. They began with the design of a ceramic aft heatshield (CAS) utilizing C/SiC panels as the capsule heatshield, a C/SiC deployable decelerator and several ablators. They additionally developed a health monitoring system, high temperature structures testing, and the insulation characterization. Though the task was pre-maturely cancelled, a significant quantity of work was accomplished.

Hanford Waste End Effector Phase I Test Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglin, Eric J.; Hatchell, Brian K.; Mount, Jason C.

This test plan describes the Phase 1 testing program of the Hanford Waste End Effector (HWEE) at the Washington River Protection Solutions’ Cold Test Facility (CTF) using a Pacific Northwest National Laboratory (PNNL)-designed testing setup. This effort fulfills the informational needs for initial assessment of the HWEE to support Hanford single-shell tank A-105 retrieval. This task will install the HWEE on a PNNL-designed robotic gantry system at CTF, install and calibrate instrumentation to measure reaction forces and process parameters, prepare and characterize simulant materials, and implement the test program. The tests will involve retrieval of water, sludge, and hardpan simulantsmore » to determine pumping rate, dilution factors, and screen fouling rate.« less

Configuration Management at NASA

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv

2013-01-01

NASA programs are characterized by complexity, harsh environments and the fact that we usually have one chance to get it right. Programs last decades and need to accept new hardware and technology as it is developed. We have multiple suppliers and international partners Our challenges are many, our costs are high and our failures are highly visible. CM systems need to be scalable, adaptable to new technology and span the life cycle of the program (30+ years). Multiple Systems, Contractors and Countries added major levels of complexity to the ISS program and CM/DM and Requirements management systems center dot CM Systems need to be designed for long design life center dot Space Station Design started in 1984 center dot Assembly Complete in 2012 center dot Systems were developed on a task basis without an overall system perspective center dot Technology moves faster than a large project office, try to make sure you have a system that can adapt

Materials processing in space program tasks

NASA Technical Reports Server (NTRS)

Mckannan, E. C. (Editor)

1978-01-01

A list of active research tasks as of the end of 1978 of the Materials Processing in Space Program of the Office of Space and Terrestrial Applications, involving several NASA Centers and other organizations is reported. An overview of the program scope for managers and scientists in industry, university and government communities is provided. The program, its history, strategy and overall goal; the organizational structures and people involved; and each research task are described. Tasks are categorized by ground based research according to four process areas. Cross references to the performing organizations and principal investigators are provided.

Development of a fiber optic high temperature strain sensor

NASA Technical Reports Server (NTRS)

Rausch, E. O.; Murphy, K. E.; Brookshire, S. P.

1992-01-01

From 1 Apr. 1991 to 31 Aug. 1992, the Georgia Tech Research Institute conducted a research program to develop a high temperature fiber optic strain sensor as part of a measurement program for the space shuttle booster rocket motor. The major objectives of this program were divided into four tasks. Under Task 1, the literature on high-temperature fiber optic strain sensors was reviewed. Task 2 addressed the design and fabrication of the strain sensor. Tests and calibration were conducted under Task 3, and Task 4 was to generate recommendations for a follow-on study of a distributed strain sensor. Task 4 was submitted to NASA as a separate proposal.

Incorporating Language Structure in a Communicative Task: An Analysis of the Language Component of a Communicative Task in the LINC Home Study Program

ERIC Educational Resources Information Center

Lenchuk, Iryna

2014-01-01

The purpose of this article is to analyze a task included in the LINC Home Study (LHS) program. LHS is a federally funded distance education program offered to newcomers to Canada who are unable to attend regular LINC classes. A task, in which a language structure (a gerund) is chosen and analyzed, was selected from one instructional module of LHS…

Space Storable Propellant Performance Gas/Liquid Like-Doublet Injector Characterization

NASA Technical Reports Server (NTRS)

Falk, A. Y.

1972-01-01

A 30-month applied research program was conducted, encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space-storable propellants. The gas/liquid propellant combination selected for study was FLOX (82.6% F2)/ambient temperature gaseous methane. The injector pattern characterized was the like-(self)-impinging doublet. Program effort was apportioned into four basic technical tasks: injector and thrust chamber design, injector and thrust chamber fabrication, performance evaluation testing, and data evaluation and reporting. Analytical parametric combustion analyses and cold flow distribution and atomization experiments were conducted with injector segment models to support design of injector/thrust chamber combinations for hot fire evaluation. Hot fire tests were conducted to: (1) optimize performance of the injector core elements, and (2) provide design criteria for the outer zone elements so that injector/thrust chamber compatibility could be achieved with only minimal performance losses.

A Verification Method of Inter-Task Cooperation in Embedded Real-time Systems and its Evaluation

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

In software development process of embedded real-time systems, the design of the task cooperation process is very important. The cooperating process of such tasks is specified by task cooperation patterns. Adoption of unsuitable task cooperation patterns has fatal influence on system performance, quality, and extendibility. In order to prevent repetitive work caused by the shortage of task cooperation performance, it is necessary to verify task cooperation patterns in an early software development stage. However, it is very difficult to verify task cooperation patterns in an early software developing stage where task program codes are not completed yet. Therefore, we propose a verification method using task skeleton program codes and a real-time kernel that has a function of recording all events during software execution such as system calls issued by task program codes, external interrupts, and timer interrupt. In order to evaluate the proposed verification method, we applied it to the software development process of a mechatronics control system.

Cancer Patient Navigator Tasks across the Cancer Care Continuum

PubMed Central

Braun, Kathryn L.; Kagawa-Singer, Marjorie; Holden, Alan E. C.; Burhansstipanov, Linda; Tran, Jacqueline H.; Seals, Brenda F.; Corbie-Smith, Giselle; Tsark, JoAnn U.; Harjo, Lisa; Foo, Mary Anne; Ramirez, Amelie G.

2011-01-01

Cancer patient navigation (PN) programs have been shown to increase access to and utilization of cancer care for poor and underserved individuals. Despite mounting evidence of its value, cancer patient navigation is not universally understood or provided. We describe five PN programs and the range of tasks their navigators provide across the cancer care continuum (education and outreach, screening, diagnosis and staging, treatment, survivorship, and end-of-life). Tasks are organized by their potential to make cancer services understandable, available, accessible, affordable, appropriate, and accountable. Although navigators perform similar tasks across the five programs, their specific approaches reflect differences in community culture, context, program setting, and funding. Task lists can inform the development of programs, job descriptions, training, and evaluation. They also may be useful in the move to certify navigators and establish mechanisms for reimbursement for navigation services. PMID:22423178

Characterizing the scientific potential of satellite sensors. [San Francisco, California

NASA Technical Reports Server (NTRS)

1984-01-01

Eleven thematic mapper (TM) radiometric calibration programs were tested and evaluated in support of the task to characterize the potential of LANDSAT TM digital imagery for scientific investigations in the Earth sciences and terrestrial physics. Three software errors related to integer overflow, divide by zero, and nonexist file group were found and solved. Raw, calibrated, and corrected image groups that were created and stored on the Barker2 disk are enumerated. Black and white pixel print files were created for various subscenes of a San Francisco scene (ID 40392-18152). The development of linear regression software is discussed. The output of the software and its function are described. Future work in TM radiometric calibration, image processing, and software development is outlined.

76 FR 49527 - Joint Motor Carrier Safety Advisory Committee and Medical Review Board Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-10

... Task 11-03, regarding the Agency's Cross Border Trucking Pilot Program, will meet. Copies of all MCSAC... Trucking Pilot Program Task The MCSAC Subcommittee will continue its work on Task 11-03 concerning the... a meeting of the Cross-Border Trucking Pilot Program subcommittee. All three days of the meeting...

SUMMARY OF 2010 DOE EM INTERNATIONAL PROGRAM STUDIES OF WASTE GLASS STRUCTURE AND PROPERTIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K.; Choi, A.; Marra, J.

2011-02-07

Collaborative work between the Savannah River National Laboratory (SRNL) and SIA Radon in Russia was divided among three tasks for calendar year 2010. The first task focused on the study of simplified high level waste glass compositions with the objective of identifying the compositional drivers that lead to crystallization and poor chemical durability. The second task focused on detailed characterization of more complex waste glass compositions with unexpectedly poor chemical durabilities. The third task focused on determining the structure of select high level waste glasses made with varying frit compositions in order to improve models under development for predicting themore » melt rate of the Defense Waste Processing Facility (DWPF) glasses. The majority of these tasks were carried out at SIA Radon. Selection and fabrication of the glass compositions, along with chemical composition measurements and evaluations of durability were carried out at SRNL and are described in this report. SIA Radon provided three summary reports based on the outcome of the three tasks. These reports are included as appendices to this document. Briefly, the result of characterization of the Task 1 glasses may indicate that glass compositions where iron is predominantly tetrahedrally coordinated have more of a tendency to crystallize nepheline or nepheline-like phases. For the Task 2 glasses, the results suggested that the relatively low fraction of tetrahedrally coordinated boron and the relatively low concentrations of Al{sub 2}O{sub 3} available to form [BO{sub 4/2}]{sup -}Me{sup +} and [AlO{sub 4/2}]{sup -}Me{sup +} tetrahedral units are not sufficient to consume all of the alkali ions, and thus these alkali ions are easily leached from the glasses. All of the twelve Task 3 glass compositions were determined to be mainly amorphous, with some minor spinel phases. Several key structural units such as metasilicate chains and rings were identified, which confirms the current modeling approach for the silicate phase. The coordination of aluminum and iron was found to be mainly tetrahedral, with some octahedral iron ions. In all samples, trigonally-coordinated boron was determined to dominate over tetrahedrally-coordinated boron. The results further suggested that BO{sub 4} tetrahedra and BO{sub 3} triangles form complex borate units and may be present as separate constituents. However, no quantification of tetrahedral-to-trigonal boron ratio was made.« less

NPP Clouds and the Earth's Radiant Energy System (CERES) Predicted Sensor Performance Calibration and Preliminary Data Product Performance

NASA Technical Reports Server (NTRS)

Priestly, Kory; Smith, George L.; Thomas, Susan; Maddock, Suzanne L.

2009-01-01

Continuation of the Earth Radiation Budget (ERB) Climate Data Record (CDR) has been identified as critical in the 2007 NRC Decadal Survey, the Global Climate Observing System WCRP report, and in an assessment titled Impacts of NPOESS Nunn-McCurdy Certification on Joint NASA-NOAA Climate Goals. In response, NASA, NOAA and NPOESS agreed in early 2008 to fly the final existing CERES Flight Model (FM-5) on the NPP spacecraft for launch in 2010. Future opportunities for ERB CDR continuity consist of procuring an additional CERES Sensor with modest performance upgrades for flight on the NPOESS C1 spacecraft in 2013, followed by a new CERES follow-on sensor for flight in 2018 on the NPOESS C3 spacecraft. While science goals remain unchanged for the long-term ERB Climate Data Record, it is now understood that the task of achieving these goals is more difficult for two reasons. The first is an increased understanding of the dynamics of the Earth/atmosphere system which demonstrates that rigorous separation of natural variability from anthropogenic change on decadal time scales requires higher accuracy and stability than originally envisioned. Secondly, future implementation scenarios involve less redundancy in flight hardware (1 vs. 2 orbits and operational sensors) resulting in higher risk of loss of continuity and reduced number of independent observations to characterize performance of individual sensors. Although EOS CERES CDR's realize a factor of 2 to 4 improvement in accuracy and stability over previous ERBE CDR's, future sensors will require an additional factor of 2 improvement to answer rigorously the science questions moving forward. Modest investments, defined through the CERES Science Team s 30-year operational history of the EOS CERES sensors, in onboard calibration hardware and pre-flight calibration and test program will ensure meeting these goals while reducing costs in re-processing scientific datasets. The CERES FM-5 pre-flight radiometric characterization program benefited from the 30-year operational experience of the CERES EOS sensors, as well as a stronger emphasis of radiometric characterization in the Statement of Work with the sensor provider. Improvements to the pre-flight program included increased spectral, spatial, and temporal sampling under vacuum conditions as well as additional tests to characterize the primary and transfer standards in the calibration facility. Future work will include collaboration with NIST to further enhance the understanding of the radiometric performance of this equipment prior to flight. The current effort summarizes these improvements to the CERES FM-5 pre-flight sensor characterization program, as well as modifications to inflight calibration procedures and operational tasking. In addition, an estimate of the impacts to the system level accuracy and traceability is presented.

[Sexual behavior characteristics of clients attending the Israel AIDS Task Force anonymous clinic in Tel Aviv].

PubMed

Bar-On, Yaeli; Perry, Zvi H; Nof, Einav; Shiber, Asher; Risenberg, Klaris; Ben Zion, Itzhak

2014-09-01

Until now, research on sexual behavior and HIV in Israel has been carried out mainly on the general population, and focused primarily on defining populations at risk, without adequate consideration given to the reasons bringing these populations to be tested, and their specific sexual behaviors. In Israel, one can choose whether to take an HIV test in confidential centers (giving one's name under medical confidentiality) or in anonymous centers (Israel AIDS Task Force in Tel Aviv and Beer Sheva, Levinsky Clinic in Tel Aviv and Haparsim Clinic in Haifa]. At least 21% of the clients of the anonymous testing centers in Israel belong to a high risk population in contrast to 2.6% in confidential clinics, and so, in this study, we hypothesize that characterization of sexual behavior patterns in anonymous testing centers might enable us to better characterize sexual behavior patterns in high risk populations. In this cross-sectional study, we used questionnaires distributed in the clinics by the Israel AIDS Task Force in order to characterize their clinic's clients. The questionnaires were completed by the Israel AIDS Task Force consultants during the consultation period at which the anonymous test was performed. Data collected included: gender, age, testing history, specific sexual behaviors and reasons for applying for the current test. A total of 926 questionnaires were collected; 29.9% of them were of female patients. The average age was 29.47 years (1±8.66]; 21.3% of the clients were men who have sex with men [MSM]; only 2.3% of the clients belonged to other high risk populations. In all groups, the majority of the patients reported high risk sexual behavior (any sexual contact without a condom) and the average age for the first test was much higher than the average age of first sexual intercourse common in Israel. Women reported more participation in unprotected vaginal intercourse than heterosexual men, and a substantial part of MSM reported performing unprotected anal intercourse. More heterosexuals than MSM stated a new relationship as a reason for applying for the test, and more MSM than heterosexuals reported arriving for a routine check-up. There is a need for comprehensive programs encouraging testing for HIV in all age groups, focusing on Sthe ages 18-25 years, and encouraging the use of a condom as a preventive measure in all populations, especially women. We feel it is essential to emphasize the need for educational programs tailored for each sub-population's psychosocial characteristics and specific issues.

Annual Report, Fall 2016: Identifying Cost Effective Tank Waste Characterization Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reboul, S. H.; DiPrete, D. P.

2016-12-12

This report documents the activities that were performed during the second year of a project undertaken to improve the cost effectiveness and timeliness of SRNL’s tank closure characterization practices. The activities performed during the first year of the project were previously reported in SRNL-STI-2015-00144. The scope of the second year activities was divided into the following three primary tasks: 1) develop a technical basis and strategy for improving the cost effectiveness and schedule of SRNL’s tank closure characterization program; 2) initiate the design and assembly of a new waste removal system for improving the throughput and reducing the personnel dosemore » associated with extraction chromatography radiochemical separations; and 3) develop and perform feasibility testing of three alternative radiochemical separation protocols holding promise for improving high resource demand/time consuming tank closure sample analysis methods.« less

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2004-05-07

The objective of this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine.more » This technical progress report covers work performed by Delphi from July 1, 2003 to December 31, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; Task 9 Stack Testing with Coal-Based Reformate; and Task 10 Technology Transfer from SECA CORE Technology Program. In this reporting period, unless otherwise noted Task 6--System Fabrication and Task 7--System Testing will be reported within Task 1 System Design and Integration. Task 8--Program Management, Task 9--Stack Testing with Coal Based Reformate, and Task 10--Technology Transfer from SECA CORE Technology Program will be reported on in the Executive Summary section of this report.« less

An Agent-Based Cockpit Task Management System

NASA Technical Reports Server (NTRS)

Funk, Ken

1997-01-01

An agent-based program to facilitate Cockpit Task Management (CTM) in commercial transport aircraft is developed and evaluated. The agent-based program called the AgendaManager (AMgr) is described and evaluated in a part-task simulator study using airline pilots.

Development of OTM Syngas Process and Testing of Syngas Derived Ultra-clean Fuels in Diesel Engines and Fuel Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

E.T.; James P. Meagher; Prasad Apte

2002-12-31

This topical report summarizes work accomplished for the Program from November 1, 2001 to December 31, 2002 in the following task areas: Task 1: Materials Development; Task 2: Composite Development; Task 4: Reactor Design and Process Optimization; Task 8: Fuels and Engine Testing; 8.1 International Diesel Engine Program; 8.2 Nuvera Fuel Cell Program; and Task 10: Program Management. Major progress has been made towards developing high temperature, high performance, robust, oxygen transport elements. In addition, a novel reactor design has been proposed that co-produces hydrogen, lowers cost and improves system operability. Fuel and engine testing is progressing well, but wasmore » delayed somewhat due to the hiatus in program funding in 2002. The Nuvera fuel cell portion of the program was completed on schedule and delivered promising results regarding low emission fuels for transportation fuel cells. The evaluation of ultra-clean diesel fuels continues in single cylinder (SCTE) and multiple cylinder (MCTE) test rigs at International Truck and Engine. FT diesel and a BP oxygenate showed significant emissions reductions in comparison to baseline petroleum diesel fuels. Overall through the end of 2002 the program remains under budget, but behind schedule in some areas.« less

Microgravity science and applications. Program tasks and bibliography for FY 1994

NASA Technical Reports Server (NTRS)

1995-01-01

This annual report includes research projects funded by the Office of Life and Microgravity Sciences and Applications, Microgravity Science and Applications Division, during FY 1994. It is a compilation of program tasks (objective, description, significance, progress, students funded under research, and bibliographic citations) for flight research and ground-based research in five major scientific disciplines: benchmark science, biotechnology, combustion science, fluid physics, and materials science. ATD (Advanced Technology Development) program task descriptions are also included. The bibliography cites the related PI (Principal Investigator) publications and presentations for these program tasks in FY 1994. Three appendices include Table of Acronyms, Guest Investigator Index, and Principal Investigator Index.

Microgravity science & applications. Program tasks and bibliography for FY 1995

NASA Technical Reports Server (NTRS)

1996-01-01

This annual report includes research projects funded by the Office of Life and Microgravity Sciences and Applications, Microgravity Science and Applications Division, during FY 1994. It is a compilation of program tasks (objective, description, significance, progress, students funded under research, and bibliographic citations) for flight research and ground based research in five major scientific disciplines: benchmark science, biotechnology, combustion science, fluid physics, and materials science. Advanced technology development (ATD) program task descriptions are also included. The bibliography cites the related principle investigator (PI) publications and presentations for these program tasks in FY 1994. Three appendices include a Table of Acronyms, a Guest Investigator index and a Principle Investigator index.

Impact of Frequent Interruption on Nurses' Patient-Controlled Analgesia Programming Performance.

PubMed

Campoe, Kristi R; Giuliano, Karen K

2017-12-01

The purpose was to add to the body of knowledge regarding the impact of interruption on acute care nurses' cognitive workload, total task completion times, nurse frustration, and medication administration error while programming a patient-controlled analgesia (PCA) pump. Data support that the severity of medication administration error increases with the number of interruptions, which is especially critical during the administration of high-risk medications. Bar code technology, interruption-free zones, and medication safety vests have been shown to decrease administration-related errors. However, there are few published data regarding the impact of number of interruptions on nurses' clinical performance during PCA programming. Nine acute care nurses completed three PCA pump programming tasks in a simulation laboratory. Programming tasks were completed under three conditions where the number of interruptions varied between two, four, and six. Outcome measures included cognitive workload (six NASA Task Load Index [NASA-TLX] subscales), total task completion time (seconds), nurse frustration (NASA-TLX Subscale 6), and PCA medication administration error (incorrect final programming). Increases in the number of interruptions were associated with significant increases in total task completion time ( p = .003). We also found increases in nurses' cognitive workload, nurse frustration, and PCA pump programming errors, but these increases were not statistically significant. Complex technology use permeates the acute care nursing practice environment. These results add new knowledge on nurses' clinical performance during PCA pump programming and high-risk medication administration.

Engineering evaluation of SSME dynamic data from engine tests and SSV flights

NASA Technical Reports Server (NTRS)

1986-01-01

An engineering evaluation of dynamic data from SSME hot firing tests and SSV flights is summarized. The basic objective of the study is to provide analyses of vibration, strain and dynamic pressure measurements in support of MSFC performance and reliability improvement programs. A brief description of the SSME test program is given and a typical test evaluation cycle reviewed. Data banks generated to characterize SSME component dynamic characteristics are described and statistical analyses performed on these data base measurements are discussed. Analytical models applied to define the dynamic behavior of SSME components (such as turbopump bearing elements and the flight accelerometer safety cut-off system) are also summarized. Appendices are included to illustrate some typical tasks performed under this study.

Features and characterization needs of rubber composite structures

NASA Technical Reports Server (NTRS)

Tabaddor, Farhad

1989-01-01

Some of the major unique features of rubber composite structures are outlined. The features covered are those related to the material properties, but the analytical features are also briefly discussed. It is essential to recognize these features at the planning stage of any long-range analytical, experimental, or application program. The development of a general and comprehensive program which fully accounts for all the important characteristics of tires, under all the relevant modes of operation, may present a prohibitively expensive and impractical task at the near future. There is therefore a need to develop application methodologies which can utilize the less general models, beyond their theoretical limitations and yet with reasonable reliability, by proper mix of analytical, experimental, and testing activities.

Towards the Automatic Generation of Programmed Foreign-Language Instructional Materials.

ERIC Educational Resources Information Center

Van Campen, Joseph A.

The purpose of this report is to describe a set of programs which either perform certain tasks useful in the generation of programed foreign-language instructional material or facilitate the writing of such task-oriented programs by other researchers. The programs described are these: (1) a PDP-10 assembly language program for the selection from a…

Multiple Animal Studies for Medical Chemical Defense Program in Soldier/ Patient Decontamination and Drug Development on Task Order 84-6: Pyruvate Dehydrogenase System for Determining the Effectiveness of Arsenic Antidotes

DTIC Science & Technology

1988-03-11

adenine dinucleotide FAD = flavin-adenine dinucleotide iipS2 = lipoic acid lip(SH)2 = dihydrolipoic acid CoA = coenzyme A. SHepatic PDH complex activity...tissues has yet to be fully characterized, but it probably involves arsenic binding to the lipoic acid and dithiol moieties of the complex (Fluharty...covalently bound lipoic acid substrate of dihydrolipoyl transacetylase is greater per mole of L and CVAA than for sodium arsenite. This is possible

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

After-effects of human-computer interaction indicated by P300 of the event-related brain potential.

PubMed

Trimmel, M; Huber, R

1998-05-01

After-effects of human-computer interaction (HCI) were investigated by using the P300 component of the event-related brain potential (ERP). Forty-nine subjects (naive non-users, beginners, experienced users, programmers) completed three paper/pencil tasks (text editing, solving intelligence test items, filling out a questionnaire on sensation seeking) and three HCI tasks (text editing, executing a tutor program or programming, playing Tetris). The sequence of 7-min tasks was randomized between subjects and balanced between groups. After each experimental condition ERPs were recorded during an acoustic discrimination task at F3, F4, Cz, P3 and P4. Data indicate that: (1) mental after-effects of HCI can be detected by P300 of the ERP; (2) HCI showed in general a reduced amplitude; (3) P300 amplitude varied also with type of task, mainly at F4 where it was smaller after cognitive tasks (intelligence test/programming) and larger after emotion-based tasks (sensation seeking/Tetris); (4) cognitive tasks showed shorter latencies; (5) latencies were widely location-independent (within the range of 356-358 ms at F3, F4, P3 and P4) after executing the tutor program or programming; and (6) all observed after-effects were independent of the user's experience in operating computers and may therefore reflect short-term after-effects only and no structural changes of information processing caused by HCI.

Task Description Language

NASA Technical Reports Server (NTRS)

Simmons, Reid; Apfelbaum, David

2005-01-01

Task Description Language (TDL) is an extension of the C++ programming language that enables programmers to quickly and easily write complex, concurrent computer programs for controlling real-time autonomous systems, including robots and spacecraft. TDL is based on earlier work (circa 1984 through 1989) on the Task Control Architecture (TCA). TDL provides syntactic support for hierarchical task-level control functions, including task decomposition, synchronization, execution monitoring, and exception handling. A Java-language-based compiler transforms TDL programs into pure C++ code that includes calls to a platform-independent task-control-management (TCM) library. TDL has been used to control and coordinate multiple heterogeneous robots in projects sponsored by NASA and the Defense Advanced Research Projects Agency (DARPA). It has also been used in Brazil to control an autonomous airship and in Canada to control a robotic manipulator.

Can Digital Tools Be Used for Improving Immunization Programs?

PubMed

Tozzi, Alberto E; Gesualdo, Francesco; D'Ambrosio, Angelo; Pandolfi, Elisabetta; Agricola, Eleonora; Lopalco, Pierluigi

2016-01-01

In order to successfully control and eliminate vaccine-preventable infectious diseases, an appropriate vaccine coverage has to be achieved and maintained. This task requires a high level of effort as it may be compromised by a number of barriers. Public health agencies have issued specific recommendations to address these barriers and therefore improve immunization programs. In the present review, we characterize issues and challenges of immunization programs for which digital tools are a potential solution. In particular, we explore previously published research on the use of digital tools in the following vaccine-related areas: immunization registries, dose tracking, and decision support systems; vaccine-preventable diseases surveillance; surveillance of adverse events following immunizations; vaccine confidence monitoring; and delivery of information on vaccines to the public. Subsequently, we analyze the limits of the use of digital tools in such contexts and envision future possibilities and challenges.

Can Digital Tools Be Used for Improving Immunization Programs?

PubMed Central

Tozzi, Alberto E.; Gesualdo, Francesco; D’Ambrosio, Angelo; Pandolfi, Elisabetta; Agricola, Eleonora; Lopalco, Pierluigi

2016-01-01

In order to successfully control and eliminate vaccine-preventable infectious diseases, an appropriate vaccine coverage has to be achieved and maintained. This task requires a high level of effort as it may be compromised by a number of barriers. Public health agencies have issued specific recommendations to address these barriers and therefore improve immunization programs. In the present review, we characterize issues and challenges of immunization programs for which digital tools are a potential solution. In particular, we explore previously published research on the use of digital tools in the following vaccine-related areas: immunization registries, dose tracking, and decision support systems; vaccine-preventable diseases surveillance; surveillance of adverse events following immunizations; vaccine confidence monitoring; and delivery of information on vaccines to the public. Subsequently, we analyze the limits of the use of digital tools in such contexts and envision future possibilities and challenges. PMID:27014673

Pilot GPS LORAN Receiver Programming Performance A Laboratory Evaluation

DOT National Transportation Integrated Search

1994-02-01

This study was designed to explore GPS/LORAN receiver programming performance under : simulated flight conditions. The programming task consisted of entering, editing, and : verifying a four-waypoint flight plan. The task demands were manipulated by ...

Simulation For Task Practice in Technical Training.

ERIC Educational Resources Information Center

Mallory, W. J.

1981-01-01

Describes two programs used by the Ford Motor Company to train manufacturing skilled trades personnel. Programmable Controller Maintenance Training Program for Industrial Technicians and Troubleshooting Strategy Program use simulation and provide improved task performance after training. (JOW)

Combined Diet and Physical Activity Promotion Programs for Prevention of Diabetes: Community Preventive Services Task Force Recommendation Statement.

PubMed

Pronk, Nicolaas P; Remington, Patrick L

2015-09-15

Community Preventive Services Task Force recommendation on the use of combined diet and physical activity promotion programs to reduce progression to type 2 diabetes in persons at increased risk. The Task Force commissioned an evidence review that assessed the benefits and harms of programs to promote and support individual improvements in diet, exercise, and weight and supervised a review on the economic efficiency of these programs in clinical trial, primary care, and primary care-referable settings. Adolescents and adults at increased risk for progression to type 2 diabetes. The Task Force recommends the use of combined diet and physical activity promotion programs by health care systems, communities, and other implementers to provide counseling and support to clients identified as being at increased risk for type 2 diabetes. Economic evidence indicates that these programs are cost-effective.

Eliciting and characterizing students' mental models within the context of engineering design

NASA Astrophysics Data System (ADS)

Dankenbring, Chelsey

Recently, science education reform documents have called for the incorporation of engineering principles and practices into the K-12 science standards and curriculum. One way this has been done is through the use of engineering design tasks as a way for students to apply their scientific understandings to real-world problems. However, minimal studies have documented students' conceptions within the context of engineering design. Thus, the first chapter of this thesis outlines the steps taken to develop a draw-and-explain item that elicited students' mental models regarding the cause of the four seasons after finishing an engineering design task. Students' mental models regarding the reason for the seasons are also described. The second chapter characterizes students' conceptions regarding sun-Earth relationships, specifically the amount of daylight hours throughout the year, for students who completed either an engineering design task or more traditional learning activities. Results from these studies indicate that draw-and-explain items are an effective way of obtaining students' mental models and that students harbor a variety of alternate conceptions on astronomy related concepts within various learning contexts. Implications from this study include the need for further research regarding how engineering design is used in the classroom and how engineering design facilitates science learning. Also, professional development that allows in-service teachers to gain experience teaching engineering design is needed, as are teacher preparation programs that expose pre-service teachers to engineering design.

About the mechanism of ERP-system pilot test

NASA Astrophysics Data System (ADS)

Mitkov, V. V.; Zimin, V. V.

2018-05-01

In the paper the mathematical problem of defining the scope of pilot test is stated, which is a task of quadratic programming. The procedure of the problem solving includes the method of network programming based on the structurally similar network representation of the criterion and constraints and which reduces the original problem to a sequence of simpler evaluation tasks. The evaluation tasks are solved by the method of dichotomous programming.

Defining Hepatocellular Carcinoma Subtypes and Treatment Responses in Patient-Derived Tumorgrafts

DTIC Science & Technology

2017-10-01

models to uncover novel biology and establish a platform to study experimental therapeutics. 1. KEYWORDS: HCC, patient derived xenografts, siRNA...have distinct cell-intrinsic biology in PDX engraftment assays Major Task 1: Expand and characterize PDX models derived from surgical and biopsy HCC...intrinsic biology in PDX engraftment assays Major Task 1: Expand and characterize PDX models derived from surgical and biopsy HCC specimens Pre-task

Integrated propulsion technology demonstrator. Program plan

NASA Technical Reports Server (NTRS)

1994-01-01

NASA and Rockwell have embarked on a cooperative agreement to define, develop, fabricate, and operate an integrated propulsion technology demonstrator (IPTD) for the purpose of validating design, process, and technology improvements of launch vehicle propulsion systems. This program, a result of NRA8-11, Task Area 1 A, is jointly funded by both NASA and Rockwell and is sponsored by the Reusable Launch Vehicle office at NASA Marshall Space flight Center. This program plan provides to the joint NASA/Rockwell integrated propulsion technology demonstrator (IPTD) team a description of the activities within tasks / sub tasks and associated schedules required to successfully achieve program objectives. This document also defines the cost elements and manpower allocations for each sub task for purpose of program control. This plan is updated periodically by developing greater depth of direction for outyear tasks as the program matures. Updating is accomplished by adding revisions to existing pages or attaching page revisions to this plan. In either case, revisions will be identified by appropriate highlighting of the change, or specifying a revision page through the use of footnotes on the bottom right of each change page. Authorization for the change is provided by the principal investigators to maintain control of this program plan document and IPTD program activities.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Exploiting Vector and Multicore Parallelsim for Recursive, Data- and Task-Parallel Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Bin; Krishnamoorthy, Sriram; Agrawal, Kunal

Modern hardware contains parallel execution resources that are well-suited for data-parallelism-vector units-and task parallelism-multicores. However, most work on parallel scheduling focuses on one type of hardware or the other. In this work, we present a scheduling framework that allows for a unified treatment of task- and data-parallelism. Our key insight is an abstraction, task blocks, that uniformly handles data-parallel iterations and task-parallel tasks, allowing them to be scheduled on vector units or executed independently as multicores. Our framework allows us to define schedulers that can dynamically select between executing task- blocks on vector units or multicores. We show that thesemore » schedulers are asymptotically optimal, and deliver the maximum amount of parallelism available in computation trees. To evaluate our schedulers, we develop program transformations that can convert mixed data- and task-parallel pro- grams into task block-based programs. Using a prototype instantiation of our scheduling framework, we show that, on an 8-core system, we can simultaneously exploit vector and multicore parallelism to achieve 14×-108× speedup over sequential baselines.« less

The SACADA database for human reliability and human performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Y. James Chang; Dennis Bley; Lawrence Criscione

2014-05-01

Lack of appropriate and sufficient human performance data has been identified as a key factor affecting human reliability analysis (HRA) quality especially in the estimation of human error probability (HEP). The Scenario Authoring, Characterization, and Debriefing Application (SACADA) database was developed by the U.S. Nuclear Regulatory Commission (NRC) to address this data need. An agreement between NRC and the South Texas Project Nuclear Operating Company (STPNOC) was established to support the SACADA development with aims to make the SACADA tool suitable for implementation in the nuclear power plants' operator training program to collect operator performance information. The collected data wouldmore » support the STPNOC's operator training program and be shared with the NRC for improving HRA quality. This paper discusses the SACADA data taxonomy, the theoretical foundation, the prospective data to be generated from the SACADA raw data to inform human reliability and human performance, and the considerations on the use of simulator data for HRA. Each SACADA data point consists of two information segments: context and performance results. Context is a characterization of the performance challenges to task success. The performance results are the results of performing the task. The data taxonomy uses a macrocognitive functions model for the framework. At a high level, information is classified according to the macrocognitive functions of detecting the plant abnormality, understanding the abnormality, deciding the response plan, executing the response plan, and team related aspects (i.e., communication, teamwork, and supervision). The data are expected to be useful for analyzing the relations between context, error modes and error causes in human performance.« less

Microgravity Science and Applications Program tasks, 1987 revision

NASA Technical Reports Server (NTRS)

1988-01-01

A compilation is presented of the active research tasks as of the end of the FY87 of the Microgravity Science and Applications Program, NASA-Office of Space Science and Applications, involving several NASA centers and other organizations. An overview is provided of the program scope for managers and scientists in industry, university, and government communities. An introductory description is provided of the program along with the strategy and overall goal, identification of the organizational structures and people involved, and a description of each task. A list of recent publications is also provided. The tasks are grouped into six major categories: Electronic Materials; Solidification of Metals, Alloys, and Composites; Fluid Dynamics and Transport Phenomena; Biotechnology; Glasses and Ceramics; and Combustion. Other categories include Experimental Technology, General Studies and Surveys; Foreign Government Affiliations; Industrial Affiliations; and Physics and Chemistry Experiments (PACE). The tasks are divided into ground based and flight experiments.

Effects of Cogmed working memory training on cognitive performance.

PubMed

Etherton, Joseph L; Oberle, Crystal D; Rhoton, Jayson; Ney, Ashley

2018-04-16

Research on the cognitive benefits of working memory training programs has produced inconsistent results. Such research has frequently used laboratory-specific training tasks, or dual-task n-back training. The current study used the commercial Cogmed Working Memory (WM) Training program, involving several different training tasks involving visual and auditory input. Healthy college undergraduates were assigned to either the full Cogmed training program of 25, 40-min training sessions; an abbreviated Cogmed program of 25, 20-min training sessions; or a no-contact control group. Pretest and posttest measures included multiple measures of attention, working memory, fluid intelligence, and executive functions. Although improvement was observed for the full training group for a digit span task, no training-related improvement was observed for any of the other measures. Results of the study suggest that WM training does not improve performance on unrelated tasks or enhance other cognitive abilities.

Microgravity Science and Applications Program tasks, 1988 revision

NASA Technical Reports Server (NTRS)

1989-01-01

The active research tasks as of the end of the fiscal year 1988 of the Microgravity Science and Applications Program, NASA-Office of Space Science and Applications, involving several NASA centers and other organizations are compiled. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. Also included are an introductory description of the program, the strategy and overall goal, identification of the organizational structures and people involved, and a description of each task. A list of recent publications is provided. The tasks are grouped into six major categories: electronic materials; solidification of metals, alloys, and composites; fluid dynamics and transport phenomena; biotechnology; glasses and ceramics; and combustion. Other categories include experimental technology, general studies and surveys; foreign government affiliations; industrial affiliations; and Physics And Chemistry Experiments (PACE). The tasks are divided into ground-based and flight experiments.

Flight Test Results on the Stability and Control of the F-15 Quiet Spike(TradeMark) Aircraft

NASA Technical Reports Server (NTRS)

Moua, Cheng M.; McWherter, Shaun C.; Cox, Timothy H.; Gera, Joe

2012-01-01

The Quiet Spike F-15B flight research program investigated supersonic shock reduction using a 24-ft sub-scale telescoping nose boom on an F-15B airplane. The program primary flight test objective was to collect flight data for aerodynamic and structural models validation up to 1.8 Mach. Other objectives were to validate the mechanical feasibility of a morphing fuselage at the operational conditions and determine the near-field shock wave characterization. The stability and controls objectives were to assess the effect of the spike on the stability, controllability, and handling qualities of the aircraft and to ensure adequate stability margins across the entire research flight envelop. The two main stability and controls issues were the effects of the telescoping nose boom influenced aerodynamics on the F-15B aircraft flight dynamics and air data and angle of attack sensors. This paper reports on the stability and controls flight envelope clearance methods and flight test analysis of the F-15B Quiet Spike. Brief pilot commentary on typical piloting tasks, approach and landing, refueling task, and air data sensitivity to the flight control system are also discussed in this report.

OpenMS: a flexible open-source software platform for mass spectrometry data analysis.

PubMed

Röst, Hannes L; Sachsenberg, Timo; Aiche, Stephan; Bielow, Chris; Weisser, Hendrik; Aicheler, Fabian; Andreotti, Sandro; Ehrlich, Hans-Christian; Gutenbrunner, Petra; Kenar, Erhan; Liang, Xiao; Nahnsen, Sven; Nilse, Lars; Pfeuffer, Julianus; Rosenberger, George; Rurik, Marc; Schmitt, Uwe; Veit, Johannes; Walzer, Mathias; Wojnar, David; Wolski, Witold E; Schilling, Oliver; Choudhary, Jyoti S; Malmström, Lars; Aebersold, Ruedi; Reinert, Knut; Kohlbacher, Oliver

2016-08-30

High-resolution mass spectrometry (MS) has become an important tool in the life sciences, contributing to the diagnosis and understanding of human diseases, elucidating biomolecular structural information and characterizing cellular signaling networks. However, the rapid growth in the volume and complexity of MS data makes transparent, accurate and reproducible analysis difficult. We present OpenMS 2.0 (http://www.openms.de), a robust, open-source, cross-platform software specifically designed for the flexible and reproducible analysis of high-throughput MS data. The extensible OpenMS software implements common mass spectrometric data processing tasks through a well-defined application programming interface in C++ and Python and through standardized open data formats. OpenMS additionally provides a set of 185 tools and ready-made workflows for common mass spectrometric data processing tasks, which enable users to perform complex quantitative mass spectrometric analyses with ease.

Towards a visual modeling approach to designing microelectromechanical system transducers

NASA Astrophysics Data System (ADS)

Dewey, Allen; Srinivasan, Vijay; Icoz, Evrim

1999-12-01

In this paper, we address initial design capture and system conceptualization of microelectromechanical system transducers based on visual modeling and design. Visual modeling frames the task of generating hardware description language (analog and digital) component models in a manner similar to the task of generating software programming language applications. A structured topological design strategy is employed, whereby microelectromechanical foundry cell libraries are utilized to facilitate the design process of exploring candidate cells (topologies), varying key aspects of the transduction for each topology, and determining which topology best satisfies design requirements. Coupled-energy microelectromechanical system characterizations at a circuit level of abstraction are presented that are based on branch constitutive relations and an overall system of simultaneous differential and algebraic equations. The resulting design methodology is called visual integrated-microelectromechanical VHDL-AMS interactive design (VHDL-AMS is visual hardware design language for analog and mixed signal).

Task Listing for Introduction to Health Occupations. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task listing is designed to be used in combination with the "Health Occupations Education Service Area Resource" in order to implement competency-based education in health occupations programs in Virginia. The task listing contains four major sections: (1) content/concept areas; (2) program and course description; (3) content…

Single Trial Brain Electrical Patterns of an Auditory and Visual Perceptuomotor Task.

DTIC Science & Technology

1983-06-01

perceptual and cognitive processing was completed, a motor program common to both tasks was executed, regardless of differences in the stimuli or type...investigation and conclusions concerning these issues during the developmental program of 12 pilot recordings is reported in the following section. B. Task...number on the CRT screen (duration 375 msec) I second after completion of response as determined by the program . If the response was sufficiently accurate

Principles of Training in Marine Corps Task Analysis. Training Manual I. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 7.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.

This is the first in a series of five training manuals developed for use by the U.S. Marine Corps Office of Manpower Utilization (OMU) in its Task Analysis (TA) program. It is designed for trainers of OMU staff members assigned to the TA program, a research effort requiring interpersonal and research competence. Objectives of the manual are: (1)…

Microgravity science and applications program tasks, 1991 revision

NASA Technical Reports Server (NTRS)

1992-01-01

Presented here is a compilation of the active research tasks for FY 1991 sponsored by the Microgravity Science and Applications Division of the NASA Office of Space Science and Applications. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. Included is an introductory description of the program, the strategy and overall goal, identification of the organizational structures and the people involved, and a description of each. The tasks are grouped into several categories: electronic materials; solidification of metals, alloys, and composites; fluids, interfaces, and transport; biotechnology; combustion science; glasses and ceramics; experimental technology, instrumentation, and facilities; and Physical and Chemistry Experiments (PACE). The tasks cover both the ground based and flight programs.

The Effects of Beacons, Comments, and Tasks on Program Comprehension Process in Software Maintenance

ERIC Educational Resources Information Center

Fan, Quyin

2010-01-01

Program comprehension is the most important and frequent process in software maintenance. Extensive research has found that individual characteristics of programmers, differences of computer programs, and differences of task-driven motivations are the major factors that affect the program comprehension results. There is no study specifically…

An Analysis of the Radio Program Manager Occupation.

ERIC Educational Resources Information Center

Friedberg, Jerry; Stella, Phillip.

This occupational analysis data was assembled to help broadcasting arts teachers develop a course of study in program management for junior and senior high school students. Following a job description for a program manager, the remainder of the content in standard task analysis format presents an analysis of nine program management duties (tasks).…

Synthetic Proxy Infrastructure for Task Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Junghans, Christoph; Pavel, Robert

The Synthetic Proxy Infrastructure for Task Evaluation is a proxy application designed to support application developers in gauging the performance of various task granularities when determining how best to utilize task based programming models.The infrastructure is designed to provide examples of common communication patterns with a synthetic workload intended to provide performance data to evaluate programming model and platform overheads for the purpose of determining task granularity for task decomposition purposes. This is presented as a reference implementation of a proxy application with run-time configurable input and output task dependencies ranging from an embarrassingly parallel scenario to patterns with stencil-likemore » dependencies upon their nearest neighbors. Once all, if any, inputs are satisfied each task will execute a synthetic workload (a simple DGEMM of in this case) of varying size and output all, if any, outputs to the next tasks.The intent is for this reference implementation to be implemented as a proxy app in different programming models so as to provide the same infrastructure and to allow for application developers to simulate their own communication needs to assist in task decomposition under various models on a given platform.« less

Rad-hard Dual-threshold High-count-rate Silicon Pixel-array Detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Adam

In this program, a Voxtel-led team demonstrates a full-format (192 x 192, 100-µm pitch, VX-810) high-dynamic-range x-ray photon-counting sensor—the Dual Photon Resolved Energy Acquisition (DUPREA) sensor. Within the Phase II program the following tasks were completed: 1) system analysis and definition of the DUPREA sensor requirements; 2) design, simulation, and fabrication of the full-format VX-810 ROIC design; 3) design, optimization, and fabrication of thick, fully depleted silicon photodiodes optimized for x-ray photon collection; 4) hybridization of the VX-810 ROIC to the photodiode array in the creation of the optically sensitive focal-plane array; 5) development of an evaluation camera; and 6)more » electrical and optical characterization of the sensor.« less

FY16 Status Report for the Uranium-Molybdenum Fuel Concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Wendy D.; Doherty, Ann L.; Henager, Charles H.

2016-09-22

The Fuel Cycle Research and Development program of the Office of Nuclear Energy has implemented a program to develop a Uranium-Molybdenum metal fuel for light water reactors. Uranium-Molybdenum fuel has the potential to provide superior performance based on its thermo-physical properties. With sufficient development, it may be able to provide the Light Water Reactor industry with a melt-resistant, accident-tolerant fuel with improved safety response. The Pacific Northwest National Laboratory has been tasked with extrusion development and performing ex-reactor corrosion testing to characterize the performance of Uranium-Molybdenum fuel in both these areas. This report documents the results of the fiscal yearmore » 2016 effort to develop the Uranium-Molybdenum metal fuel concept for light water reactors.« less

Avionics Simulation, Development and Software Engineering

NASA Technical Reports Server (NTRS)

Francis, Ronald C.; Settle, Gray; Tobbe, Patrick A.; Kissel, Ralph; Glaese, John; Blanche, Jim; Wallace, L. D.

2001-01-01

This monthly report summarizes the work performed under contract NAS8-00114 for Marshall Space Flight Center in the following tasks: 1) Purchase Order No. H-32831D, Task Order 001A, GPB Program Software Oversight; 2) Purchase Order No. H-32832D, Task Order 002, ISS EXPRESS Racks Software Support; 3) Purchase Order No. H-32833D, Task Order 003, SSRMS Math Model Integration; 4) Purchase Order No. H-32834D, Task Order 004, GPB Program Hardware Oversight; 5) Purchase Order No. H-32835D, Task Order 005, Electrodynamic Tether Operations and Control Analysis; 6) Purchase Order No. H-32837D, Task Order 007, SRB Command Receiver/Decoder; and 7) Purchase Order No. H-32838D, Task Order 008, AVGS/DART SW and Simulation Support

Online Attention Training for Older Adults.

PubMed

Wennberg, Alexandra; Kueider, Alexandra; Spira, Adam; Adams, Gregory; Rager, Robert; Rebok, George

Evidence suggests that cognitive training interventions can improve older adults' cognitive performance. Successful training programs are adaptable and train multiple cognitive domains to target individual strengths and weaknesses. Computerized training programs are useful because they allow older adults to easily access training. This pilot study used an online attention training program, ATTENTION WORKOUT™, to enhance three aspects of attention- coordination , allocation , and selective focus -in community-dwelling older adults randomized to either an abbreviated (n=13) or an extended (n=17) practice training program over a 6-week period. Participants in the extended practice group significantly improved on selective focus reading distraction tasks with unrelated words (U=39.5; Z=-2.34; p =.02) and blanks (U=26.5; Z=-3.05; p =.002) as well as a matching attributes task (U=49.5; Z=-2.33; p =.02). The extended practice group significantly improved on three tasks of coordinating attention - radio-tuning (U=30; Z=-2.73; p =.01), circuit-breaker resetting (U=46; Z=-2.24; p =.03), and the combination of the two tasks (U=15; Z=-3.51; p <.0001) - as well as a memory generalization task (U=20; Z=-3.27; p =.001). A post-test satisfaction survey found both groups enjoyed the program, but the abbreviated practice group felt the tasks were more difficult. These findings suggest online attention training programs, like ATTENTION WORKOUT, can improve attention-related skills in community-dwelling older adults.

Report of the Task Force on School Health.

ERIC Educational Resources Information Center

Maryland State Dept. of Health and Mental Hygiene, Baltimore.

The 1990 Report of the Task Force on School Health examines the current status of Maryland's school health programs and proposes 16 recommendations designed to implement a comprehensive school health (CSH) program to meet the needs of all students. The report describes the Task Force, which was appointed in 1989. After presenting a background on…

Industrial Electrical Maintenance Learning Guides and Task Listing by Occupational Titles.

ERIC Educational Resources Information Center

Whitmer, Melvin

Seven student learning guides are provided for an industrial electrical maintenance program at the secondary, postsecondary, or adult level. Each learning guide is composed of these component parts: a title page that states the task, purpose, program and task numbers, estimated time, and prerequisites; an optional learning contract that includes…

Office Education. North Dakota Validated Task Listing. Competency-Based Vocational Education.

ERIC Educational Resources Information Center

North Dakota State Board for Vocational Education, Bismarck.

Intended to provide a base for vocational office education instructional programs at secondary and postsecondary levels in North Dakota, this task listing describes the skills needed to be performed by program completers, from the viewpoint of workers in office occupations. A listing of task validators (name, occupation, employer, business city,…

Applications of artificial intelligence to mission planning

NASA Technical Reports Server (NTRS)

Ford, Donnie R.; Floyd, Stephen A.; Rogers, John S.

1990-01-01

The following subject areas are covered: object-oriented programming task; rule-based programming task; algorithms for resource allocation; connecting a Symbolics to a VAX; FORTRAN from Lisp; trees and forest task; software data structure conversion; software functionality modifications and enhancements; portability of resource allocation to a TI MicroExplorer; frontier of feasibility software system; and conclusions.

Liquid hydrogen turbopump rapid start program. [thermal preconditioning using coatings

NASA Technical Reports Server (NTRS)

Wong, G. S.

1973-01-01

This program was to analyze, test, and evaluate methods of achieving rapid-start of a liquid hydrogen feed system (inlet duct and turbopump) using a minimum of thermal preconditioning time and propellant. The program was divided into four tasks. Task 1 includes analytical studies of the testing conducted in the other three tasks. Task 2 describes the results from laboratory testing of coating samples and the successful adherence of a KX-635 coating to the internal surfaces of the feed system tested in Task 4. Task 3 presents results of testing an uncoated feed system. Tank pressure was varied to determine the effect of flowrate on preconditioning. The discharge volume and the discharge pressure which initiates opening of the discharge valve were varied to determine the effect on deadhead (no through-flow) start transients. Task 4 describes results of testing a similar, internally coated feed system and illustrates the savings in preconditioning time and propellant resulting from the coatings.

The Creative task Creator: a tool for the generation of customized, Web-based creativity tasks.

PubMed

Pretz, Jean E; Link, John A

2008-11-01

This article presents a Web-based tool for the creation of divergent-thinking and open-ended creativity tasks. A Java program generates HTML forms with PHP scripting that run an Alternate Uses Task and/or open-ended response items. Researchers may specify their own instructions, objects, and time limits, or use default settings. Participants can also be prompted to select their best responses to the Alternate Uses Task (Silvia et al., 2008). Minimal programming knowledge is required. The program runs on any server, and responses are recorded in a standard MySQL database. Responses can be scored using the consensual assessment technique (Amabile, 1996) or Torrance's (1998) traditional scoring method. Adoption of this Web-based tool should facilitate creativity research across cultures and access to eminent creators. The Creative Task Creator may be downloaded from the Psychonomic Society's Archive of Norms, Stimuli, and Data, www.psychonomic.org/archive.

Robot Task Commander with Extensible Programming Environment

NASA Technical Reports Server (NTRS)

Hart, Stephen W (Inventor); Wightman, Brian J (Inventor); Dinh, Duy Paul (Inventor); Yamokoski, John D. (Inventor); Gooding, Dustin R (Inventor)

2014-01-01

A system for developing distributed robot application-level software includes a robot having an associated control module which controls motion of the robot in response to a commanded task, and a robot task commander (RTC) in networked communication with the control module over a network transport layer (NTL). The RTC includes a script engine(s) and a GUI, with a processor and a centralized library of library blocks constructed from an interpretive computer programming code and having input and output connections. The GUI provides access to a Visual Programming Language (VPL) environment and a text editor. In executing a method, the VPL is opened, a task for the robot is built from the code library blocks, and data is assigned to input and output connections identifying input and output data for each block. A task sequence(s) is sent to the control module(s) over the NTL to command execution of the task.

The Appropriateness of Scratch and App Inventor as Educational Environments for Teaching Introductory Programming in Primary and Secondary Education

ERIC Educational Resources Information Center

Papadakis, Stamatios; Kalogiannakis, Michail; Orfanakis, Vasileios; Zaranis, Nicholas

2017-01-01

Teaching programming is a complex task. The task is even more challenging for introductory modules. There is an ongoing debate in the teaching community over the best approach to teaching introductory programming. Visual block-based programming environments allow school students to create their own programs in ways that are more accessible than in…

An assessment of patient navigator activities in breast cancer patient navigation programs using a nine-principle framework.

PubMed

Gunn, Christine M; Clark, Jack A; Battaglia, Tracy A; Freund, Karen M; Parker, Victoria A

2014-10-01

To determine how closely a published model of navigation reflects the practice of navigation in breast cancer patient navigation programs. Observational field notes describing patient navigator activities collected from 10 purposefully sampled, foundation-funded breast cancer navigation programs in 2008-2009. An exploratory study evaluated a model framework for patient navigation published by Harold Freeman by using an a priori coding scheme based on model domains. Field notes were compiled and coded. Inductive codes were added during analysis to characterize activities not included in the original model. Programs were consistent with individual-level principles representing tasks focused on individual patients. There was variation with respect to program-level principles that related to program organization and structure. Program characteristics such as the use of volunteer or clinical navigators were identified as contributors to patterns of model concordance. This research provides a framework for defining the navigator role as focused on eliminating barriers through the provision of individual-level interventions. The diversity observed at the program level in these programs was a reflection of implementation according to target population. Further guidance may be required to assist patient navigation programs to define and tailor goals and measurement to community needs. © Health Research and Educational Trust.

An Assessment of Patient Navigator Activities in Breast Cancer Patient Navigation Programs Using a Nine-Principle Framework

PubMed Central

Gunn, Christine M; Clark, Jack A; Battaglia, Tracy A; Freund, Karen M; Parker, Victoria A

2014-01-01

Objective To determine how closely a published model of navigation reflects the practice of navigation in breast cancer patient navigation programs. Data Source Observational field notes describing patient navigator activities collected from 10 purposefully sampled, foundation-funded breast cancer navigation programs in 2008–2009. Study Design An exploratory study evaluated a model framework for patient navigation published by Harold Freeman by using an a priori coding scheme based on model domains. Data Collection Field notes were compiled and coded. Inductive codes were added during analysis to characterize activities not included in the original model. Principal Findings Programs were consistent with individual-level principles representing tasks focused on individual patients. There was variation with respect to program-level principles that related to program organization and structure. Program characteristics such as the use of volunteer or clinical navigators were identified as contributors to patterns of model concordance. Conclusions This research provides a framework for defining the navigator role as focused on eliminating barriers through the provision of individual-level interventions. The diversity observed at the program level in these programs was a reflection of implementation according to target population. Further guidance may be required to assist patient navigation programs to define and tailor goals and measurement to community needs. PMID:24820445

CREASE 6.0 Catalog of Resources for Education in Ada and Software Engineering

DTIC Science & Technology

1992-02-01

Programming Software Engineering Strong Typing Tasking Audene . Computer Scientists Terbook(s): Barnes, J. Programming in Ada, 3rd ed. Addison-Wesley...Ada. Concept: Abstract Data Types Management Overview Package Real-Time Programming Tasking Audene Computer Scientists Textbook(s): Barnes, J

The Backpack Food Program's Effects on U.S. Elementary Students' Hunger and On-Task Behavior

ERIC Educational Resources Information Center

Ecker, Meghan E.; Sifers, Sarah K.

2013-01-01

Purpose/Objectives: The purpose of this study was to evaluate the BackPack Food Program's effectiveness in combating students' hunger over the weekends and school breaks, as well as analyze the program's effects on students' on-task behavior in the classroom. Additionally, this study examined program satisfaction from students, parents, and…

Thermal-mechanical fatigue behavior of nickel-base superalloys

NASA Technical Reports Server (NTRS)

Pelloux, R. M.; Marchand, N.

1986-01-01

The main achievements of a 36-month research program are presented. The main objective was to gain more insight into the problem of crack growth under thermal mechanical fatigue (TMF) conditions. This program was conducted at M.I.T. for the period of September 1982 to September 1985. The program was arranged into five technical tasks. Under Task I, the literature of TMF data was reviewed. The goal was to identify the crack propagation conditions in aircraft engines (hot section) and to assess the validity of conventional fracture mechanics parameters to address TMF crack growth. The second task defined the test facilities, test specimen and the testing conditions needed to establish the effectiveness of data correlation parameters identified in Task I. Three materials (Inconel X-750, Hastelloy-X, and B-1900) were chosen for the program. Task II was accomplished in collaboration with Pratt & Whitney Aircraft engineers. Under Task III, a computerized testing system to measure the TMF behavior (LCF and CG behaviors) of various alloys systems was built. The software used to run isothermal and TMF tests was also developed. Built around a conventional servohydraulic machine, the system is capable of push-pull tests under stress or strain and temperature controlled conditions in the temperature range of 25C to 1050C. A crack propagation test program was defined and conducted under Task IV. The test variables included strain range, strain rate (frequency) and temperature. Task V correlated and generalized the Task IV data for isothermal and variable temperature conditions so that several crack propagation parameters could be compared and evaluated. The structural damage (mode of cracking and dislocation substructure) under TMF cycling was identified and contrasted with the isothermal damage to achieve a sound fundamental mechanistic understanding of TMF.

Design, fabrication and acceptance testing of a zero gravity whole body shower

NASA Technical Reports Server (NTRS)

Schumacher, E. A.; Lenda, J. A.

1974-01-01

Recent research and development programs have established the ability of the zero gravity whole body shower to maintain a comfortable environment in which the crewman can safely cleanse and dry the body. The purpose of this program was to further advance the technology of whole body bathing and to demonstrate technological readiness including in-flight maintenance by component replacement for flight applications. Three task efforts of this program are discussed. Conceptual designs and system tradeoffs were accomplished in task 1. Task 2 involved the formulation of preliminary and final designs for the shower, while task 3 included the fabrication and test of the shower assembly. Particular attention is paid to the evaluation and correction of test anomalies during the final phase of the program.

Microgravity Science and Applications Program Tasks, 1984 Revision

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1985-01-01

This report is a compilation of the active research tasks as of the end of the fiscal year 1984 of the Microgravity Science and Applications Program, NASA-Office of Space Science and Applications, involving several NASA centers and other organizations. The purpose of the document is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The report is structured to include an introductory description of the program, strategy and overall goal; identification of the organizational structures and people involved; and a description of each research task, together with a list of recent publications. The tasks are grouped into six categories: (1) electronic materials; (2) solidification of metals, alloys, and composites; (3) fluid dynamics and transports; (4) biotechnology; (5) glasses and ceramics; and (6) combustion.

Microgravity Science and Application Program tasks, 1989 revision

NASA Technical Reports Server (NTRS)

1990-01-01

The active research tasks, as of the fiscal year 1989, of the Microgravity Science and Applications Program, NASA Office of Space Science and Applications, involving several NASA Centers and other organizations are compiled. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The scientists in industry, university, and government communities. An introductory description of the program, the strategy and overall goal, identification of the organizational structures and people involved, and a description of each task are included. Also provided is a list of recent publications. The tasks are grouped into several major categories: electronic materials, solidification of metals, alloys, and composites; fluids, interfaces, and transport; biotechnology; glasses and ceramics; combustion science; physical and chemistry experiments (PACE); and experimental technology, facilities, and instrumentation.

Space station common module power system network topology and hardware development

NASA Technical Reports Server (NTRS)

Landis, D. M.

1985-01-01

Candidate power system newtork topologies for the space station common module are defined and developed and the necessary hardware for test and evaluation is provided. Martin Marietta's approach to performing the proposed program is presented. Performance of the tasks described will assure systematic development and evaluation of program results, and will provide the necessary management tools, visibility, and control techniques for performance assessment. The plan is submitted in accordance with the data requirements given and includes a comprehensive task logic flow diagram, time phased manpower requirements, a program milestone schedule, and detailed descriptions of each program task.

A New Approach Towards Characterizing Microstructural Influence on Material Behavior Under Very High Cycle

DTIC Science & Technology

2015-09-30

for public release   4 /25   PROJECT DETAIL In this research, fatigue crack formation and growth in the near alpha titanium alloy Ti- 6242S...MM-YYYY)      31-03-2016 2. REPORT TYPE Final Performance 3. DATES COVERED (From - To) 15-08-2012 to 14-08-2015 4 . TITLE AND SUBTITLE A New Approach...PROGRAM ELEMENT NUMBER 61102F 6 . AUTHOR(S) Samantha Daly 5d.  PROJECT NUMBER 5e.  TASK NUMBER 5f.  WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME

Advanced Transportation System Studies. Technical Area 3: Alternate Propulsion Subsystems Concepts. Volume 3; Program Cost Estimates

NASA Technical Reports Server (NTRS)

Levack, Daniel J. H.

2000-01-01

The objective of this contract was to provide definition of alternate propulsion systems for both earth-to-orbit (ETO) and in-space vehicles (upper stages and space transfer vehicles). For such propulsion systems, technical data to describe performance, weight, dimensions, etc. was provided along with programmatic information such as cost, schedule, needed facilities, etc. Advanced technology and advanced development needs were determined and provided. This volume separately presents the various program cost estimates that were generated under three tasks: the F- IA Restart Task, the J-2S Restart Task, and the SSME Upper Stage Use Task. The conclusions, technical results , and the program cost estimates are described in more detail in Volume I - Executive Summary and in individual Final Task Reports.

Microgravity Science and Applications Program tasks, 1990 revision

NASA Technical Reports Server (NTRS)

1991-01-01

The active research tasks as of the end of the fiscal year 1990 sponsored by the Microgravity Science and Applications Division of the NASA Office of Space Science and Applications are compiled. The purpose is to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The report includes an introductory description of the program, the strategy and overall goal; an index of principle investigators; and a description of each task. A list of recent publications is also provided. The tasks are grouped into six major categories: electronic materials; solidification of metals, alloys, and composites; fluid dynamics and transport phenomena; biotechnology; glasses and ceramics; combustion; experimental technology; facilities; and Physics And Chemistry Experiments (PACE). The tasks are divided into ground-based and flight experiments.

Model construction of “earning money by taking photos”

NASA Astrophysics Data System (ADS)

Yang, Jingmei

2018-03-01

In the era of information, with the increasingly developed network, “to earn money by taking photos” is a self-service model under the mobile Internet. The user downloads the APP, registers as a member of the APP, and then takes a task that needs to take photographs from the APP and earns the reward of the task on the APP. The article uses the task data and membership information data of an already completed project, including the member’s location and reputation value. On the basis of reasonable assumption, the data was processed with the MATLAB, SPSS and Excel software. This article mainly studied problems of the function relationship between the task performance, task position (GPS latitude and GPS longitude) and task price of users, analyzed the project’s task pricing rules and the reasons why the task is not completed, and applied multivariate regression function and GeoQ software to analyze the data, studied the task pricing rules, applied the chart method to solve the complex data, clear and easy to understand, and also reality simulation is applied to analyze why the tasks are not completed. Also, compared with the previous program, a new task pricing program is designed for the project to obtain the confidence level by means of the SPSS software, to estimate the reasonable range of the task pricing, predict and design a new pricing program on the reasonable price range.

Materials processing in space program tasks-supplement

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1983-01-01

An overview of the program scope for managers and scientists in industry, university, and government communities is provided. An introductory description of the program, its history, strategy, and overall goals; identification of the organizational structures and people involved; and a description of each research task, together with a list of recent publications are included. The tasks are grouped into six categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies; combustion experiments; and experimental technology.

Sigh rate and respiratory variability during mental load and sustained attention.

PubMed

Vlemincx, Elke; Taelman, Joachim; De Peuter, Steven; Van Diest, Ilse; Van den Bergh, Omer

2011-01-01

Spontaneous breathing consists of substantial correlated variability: Parameters characterizing a breath are correlated with parameters characterizing previous and future breaths. On the basis of dynamic system theory, negative emotion states are predicted to reduce correlated variability whereas sustained attention is expected to reduce total respiratory variability. Both are predicted to evoke sighing. To test this, respiratory variability and sighing were assessed during a baseline, stressful mental arithmetic task, nonstressful sustained attention task, and recovery in between tasks. For respiration rate (excluding sighs), reduced total variability was found during the attention task, whereas correlated variation was reduced during mental load. Sigh rate increased during mental load and during recovery from the attention task. It is concluded that mental load and task-related attention show specific patterns in respiratory variability and sigh rate. Copyright © 2010 Society for Psychophysiological Research.

A training program to improve gait while dual tasking in patients with Parkinson's disease: a pilot study.

PubMed

Yogev-Seligmann, Galit; Giladi, Nir; Brozgol, Marina; Hausdorff, Jeffrey M

2012-01-01

Impairments in the ability to perform another task while walking (ie, dual tasking [DT]) are associated with an increased risk of falling. Here we describe a program we developed specifically to improve DT performance while walking based on motor learning principles and task-specific training. We examined feasibility, potential efficacy, retention, and transfer to the performance of untrained tasks in a pilot study among 7 patients with Parkinson's disease (PD). Seven patients (Hoehn and Yahr stage, 2.1±0.2) were evaluated before, after, and 1 month after 4 weeks of DT training. Gait speed and gait variability were measured during usual walking and during 4 DT conditions. The 4-week program of one-on-one training included walking while performing several distinct cognitive tasks. Gait speed and gait variability during DT significantly improved. Improvements were also seen in the DT conditions that were not specifically trained and were retained 1 month after training. These initial findings support the feasibility of applying a task-specific DT gait training program for patients with PD and suggest that it positively affects DT gait, even in untrained tasks. The present results are also consistent with the possibility that DT gait training enhances divided attention abilities during walking. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Effect of Task-Centered Instructional Programs on Hypertensives' Ability to Achieve and Maintain Reduced Dietary Sodium Intake.

ERIC Educational Resources Information Center

Mann, Karen V.; Sullivan, Patricia L.

This study sought to determine the effectiveness of systematically designed instructional programs in helping adult hypertensives to achieve and maintain dietary sodium intake. Sixty-six subjects were randomly allocated to one of three groups: task-centered instruction; task-centered instruction plus goal-setting and self-monitoring; or control.…

(Lack of) Corticospinal facilitation in association with hand laterality judgments.

PubMed

Ferron, Lucas; Tremblay, François

2017-07-01

In recent years, mental practice strategies have drawn much interest in the field of rehabilitation. One form of mental practice particularly advocated involves judging the laterality of images depicting body parts. Such laterality judgments are thought to rely on implicit motor imagery via mental rotation of one own's limb. In this study, we sought to further characterize the involvement of the primary motor cortex (M1) in hand laterality judgments (HLJ) as performed in the context of an application designed for rehabilitation. To this end, we measured variations in corticospinal excitability in both hemispheres with motor evoked potentials (MEPs) while participants (n = 18, young adults) performed either HLJ or a mental counting task. A third condition (foot observation) provided additional control. We hypothesized that HLJ would lead to a selective MEP facilitation when compared to the other tasks and that this facilitation would be greater on the right than the left hemisphere. Contrary to our predictions, we found no evidence of task effects and hemispheric effects for the HLJ task. Significant task-related MEP facilitation was detected only for the mental counting task. A secondary experiment performed in a subset of participants (n = 6) to further test modulation during HLJ yielded the same results. We interpret the lack of facilitation with HLJ in the light of evidence that participants may rely on alternative strategies when asked to judge laterality when viewing depictions of body parts. The use of visual strategies notably would reduce the need to engage in mental rotation, thus reducing M1 involvement. These results have implications for applications of laterality tasks in the context of the rehabilitation program.

The Quiet Eye and Motor Expertise: Explaining the “Efficiency Paradox”

PubMed Central

Klostermann, André; Hossner, Ernst-Joachim

2018-01-01

It has been consistently reported that experts show longer quiet eye (QE) durations when compared to near-experts and novices. However, this finding is rather paradoxical as motor expertise is characterized by an economization of motor-control processes rather than by a prolongation in response programming, a suggested explanatory mechanism of the QE phenomenon. Therefore, an inhibition hypothesis was proposed that suggests an inhibition of non-optimal task solutions over movement parametrization, which is particularly necessary in experts due to the great extent and high density of their experienced task-solution space. In the current study, the effect of the task-solution space’ extension was tested by comparing the QE-duration gains in groups that trained a far-aiming task with a small number (low-extent) vs. a large number (high-extent) of task variants. After an extensive training period of more than 750 trials, both groups showed superior performance in post-test and retention test when compared to pretest and longer QE durations in post-test when compared to pretest. However, the QE durations dropped to baseline values at retention. Finally, the expected additional gain in QE duration for the high-extent group was not found and thus, the assumption of long QE durations due to an extended task-solution space was not confirmed. The findings were (by tendency) more in line with the density explanation of the inhibition hypothesis. This density argument suits research revealing a high specificity of motor skills in experts thus providing worthwhile options for future research on the paradoxical relation between the QE and motor expertise. PMID:29472882

Mathematical Tasks and the Student: Navigating "Tensions of Intentions" between Designers, Teachers, and Students

ERIC Educational Resources Information Center

Johnson, Heather Lynn; Coles, Alf; Clarke, David

2017-01-01

We articulate a student perspective on task design in mathematics education, foregrounding a dynamic relationship between intentions of task designers, teachers, and students. First, we characterize a student perspective on task design. Second, we provide theoretical perspectives that we use as tools to account for different facets of task design…

A framework for characterizing eHealth literacy demands and barriers.

PubMed

Chan, Connie V; Kaufman, David R

2011-11-17

Consumer eHealth interventions are of a growing importance in the individual management of health and health behaviors. However, a range of access, resources, and skills barriers prevent health care consumers from fully engaging in and benefiting from the spectrum of eHealth interventions. Consumers may engage in a range of eHealth tasks, such as participating in health discussion forums and entering information into a personal health record. eHealth literacy names a set of skills and knowledge that are essential for productive interactions with technology-based health tools, such as proficiency in information retrieval strategies, and communicating health concepts effectively. We propose a theoretical and methodological framework for characterizing complexity of eHealth tasks, which can be used to diagnose and describe literacy barriers and inform the development of solution strategies. We adapted and integrated two existing theoretical models relevant to the analysis of eHealth literacy into a single framework to systematically categorize and describe task demands and user performance on tasks needed by health care consumers in the information age. The method derived from the framework is applied to (1) code task demands using a cognitive task analysis, and (2) code user performance on tasks. The framework and method are applied to the analysis of a Web-based consumer eHealth task with information-seeking and decision-making demands. We present the results from the in-depth analysis of the task performance of a single user as well as of 20 users on the same task to illustrate both the detailed analysis and the aggregate measures obtained and potential analyses that can be performed using this method. The analysis shows that the framework can be used to classify task demands as well as the barriers encountered in user performance of the tasks. Our approach can be used to (1) characterize the challenges confronted by participants in performing the tasks, (2) determine the extent to which application of the framework to the cognitive task analysis can predict and explain the problems encountered by participants, and (3) inform revisions to the framework to increase accuracy of predictions. The results of this illustrative application suggest that the framework is useful for characterizing task complexity and for diagnosing and explaining barriers encountered in task completion. The framework and analytic approach can be a potentially powerful generative research platform to inform development of rigorous eHealth examination and design instruments, such as to assess eHealth competence, to design and evaluate consumer eHealth tools, and to develop an eHealth curriculum.

A Framework for Characterizing eHealth Literacy Demands and Barriers

PubMed Central

Chan, Connie V

2011-01-01

Background Consumer eHealth interventions are of a growing importance in the individual management of health and health behaviors. However, a range of access, resources, and skills barriers prevent health care consumers from fully engaging in and benefiting from the spectrum of eHealth interventions. Consumers may engage in a range of eHealth tasks, such as participating in health discussion forums and entering information into a personal health record. eHealth literacy names a set of skills and knowledge that are essential for productive interactions with technology-based health tools, such as proficiency in information retrieval strategies, and communicating health concepts effectively. Objective We propose a theoretical and methodological framework for characterizing complexity of eHealth tasks, which can be used to diagnose and describe literacy barriers and inform the development of solution strategies. Methods We adapted and integrated two existing theoretical models relevant to the analysis of eHealth literacy into a single framework to systematically categorize and describe task demands and user performance on tasks needed by health care consumers in the information age. The method derived from the framework is applied to (1) code task demands using a cognitive task analysis, and (2) code user performance on tasks. The framework and method are applied to the analysis of a Web-based consumer eHealth task with information-seeking and decision-making demands. We present the results from the in-depth analysis of the task performance of a single user as well as of 20 users on the same task to illustrate both the detailed analysis and the aggregate measures obtained and potential analyses that can be performed using this method. Results The analysis shows that the framework can be used to classify task demands as well as the barriers encountered in user performance of the tasks. Our approach can be used to (1) characterize the challenges confronted by participants in performing the tasks, (2) determine the extent to which application of the framework to the cognitive task analysis can predict and explain the problems encountered by participants, and (3) inform revisions to the framework to increase accuracy of predictions. Conclusions The results of this illustrative application suggest that the framework is useful for characterizing task complexity and for diagnosing and explaining barriers encountered in task completion. The framework and analytic approach can be a potentially powerful generative research platform to inform development of rigorous eHealth examination and design instruments, such as to assess eHealth competence, to design and evaluate consumer eHealth tools, and to develop an eHealth curriculum. PMID:22094891

Task Force on Innovation in Dental Hygiene Curricula.

ERIC Educational Resources Information Center

Bader, James; And Others

1989-01-01

The background, origins, functions, and recommendations of the American Association of Dental Schools' task force investigating improvement of access to dental hygiene training programs and of curriculum and program design are presented. (MSE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

During this time period, at WVU, the authors have obtained models for the kinetics of the HAS (higher alcohol synthesis) reaction over the Co-K-MoS{sub 2}/C catalyst. The Rotoberty reactor was then replaced in the reactor system by a plug-flow tubular reactor. Accordingly, the authors re-started the investigations on sulfide catalysts. The authors encountered and solved the leak problem from the sampling valve for the non-sulfided reactor system. They also modified the system to eliminate the condensation problem. Accordingly, they are continuing their kinetic studies on the reduced Mo-Ni-K/C catalysts. They have set up an apparatus for temperature-programmed reduction (TPR) studies,more » and have obtained some interesting results on TPR characterizations. At UCC, the complete characterization of selected catalysts has been started. The authors sent nine selected types of ZnO, Zn/CrO and Zn/Cr/MnO catalysts and supports for BET surface area, SEM, XRD and ICP. They also sent fresh and spent samples of the Engelhard Zn/CrO catalyst impregnated with 3 wt% potassium for ISS and XPS testing. In Task 2, work on the design and optimization portion of this task, as well as on the fuel testing, is completed. All funds have been expended and there are no personnel working on this project.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, H; Lan, L; Sennett, C

Purpose: To gain insight into the role of parenchyma stroma in the characterization of breast tumors by incorporating computerized mammographic parenchyma assessment into breast CADx in the task of distinguishing between malignant and benign lesions. Methods: This study was performed on 182 biopsy-proven breast mass lesions, including 76 benign and 106 malignant lesions. For each full-field digital mammogram (FFDM) case, our quantitative imaging analysis was performed on both the tumor and a region-of-interest (ROI) from the normal contralateral breast. The lesion characterization includes automatic lesion segmentation and feature extraction. Radiographic texture analysis (RTA) was applied on the normal ROIs tomore » assess the mammographic parenchymal patterns of these contralateral normal breasts. Classification performance of both individual computer extracted features and the output from a Bayesian artificial neural network (BANN) were evaluated with a leave-one-lesion-out method using receiver operating characteristic (ROC) analysis with area under the curve (AUC) as the figure of merit. Results: Lesion characterization included computer-extracted phenotypes of spiculation, size, shape, and margin. For parenchymal pattern characterization, five texture features were selected, including power law beta, contrast, and edge gradient. Merging of these computer-selected features using BANN classifiers yielded AUC values of 0.79 (SE=0.03) and 0.67 (SE=0.04) in the task of distinguishing between malignant and benign lesions using only tumor phenotypes and texture features from the contralateral breasts, respectively. Incorporation of tumor phenotypes with parenchyma texture features into the BANN yielded improved classification performance with an AUC value of 0.83 (SE=0.03) in the task of differentiating malignant from benign lesions. Conclusion: Combining computerized tumor and parenchyma phenotyping was found to significantly improve breast cancer diagnostic accuracy highlighting the need to consider both tumor and stroma in decision making. Funding: University of Chicago Dean Bridge Fund, NCI U24-CA143848-05, P50-CA58223 Breast SPORE program, and Breast Cancer Research Foundation. COI: MLG is a stockholder in R2 technology/Hologic and receives royalties from Hologic, GE Medical Systems, MEDIAN Technologies, Riverain Medical, Mitsubishi, and Toshiba. MLG is a cofounder and stockholder in Quantitative Insights.« less

Pair Negotiation When Developing English Speaking Tasks

ERIC Educational Resources Information Center

Bohórquez Suárez, Ingrid Liliana; Gómez Sará, Mary Mily; Medina Mosquera, Sindy Lorena

2011-01-01

This study analyzes what characterizes the negotiations of seventh graders at a public school in Bogotá when working in pairs to develop speaking tasks in EFL classes. The inquiry is a descriptive case study that follows the qualitative paradigm. As a result of analyzing the data, we obtained four consecutive steps that characterize students'…

Optical Characterization of Wide Field-of-View Night Vision Devices

DTIC Science & Technology

1999-01-01

This paper has been cleared by ASC 99-2354 Optical Characterization of Wide Field-Of-View Night Vision Devices Peter L. Marasco and H. Lee Task Air...the SAFE SocietyÕs 36th Annual Symposium. Task, H.L., Hartman, R., Marasco , P.L., Zobel, A, (1993) Methods for measuring characteristics of night

The Partners in Prevention Program: The Evaluation and Evolution of the Task-Centered Case Management Model

ERIC Educational Resources Information Center

Colvin, Julanne; Lee, Mingun; Magnano, Julienne; Smith, Valerie

2008-01-01

This article reports on the further development of the task-centered model for difficulties in school performance. We used Bailey-Dempsey and Reid's (1996) application of Rothman and Thomas's (1994) design and development framework and annual evaluations of the Partners in Prevention (PIP) Program to refine the task-centered case management model.…

Report of the Task Force to Explore Feasibility of a Three-Year Baccalaureate Program. Established March 1, 1972.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee.

Presented in this document are the results of a Task Force study in Florida that explored the feasibility of a baccalaureate degree program that can be completed in 3 academic years. The Task Force addressed itself to the issues surrounding time-shortened degrees: acceleration; locksteps; relevancy of educational objectives to individual and…

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Specificity of Balance Training in Healthy Individuals: A Systematic Review and Meta-Analysis.

PubMed

Kümmel, Jakob; Kramer, Andreas; Giboin, Louis-Solal; Gruber, Markus

2016-09-01

It has become common practice to incorporate balance tasks into the training program for athletes who want to improve performance and prevent injuries, in rehabilitation programs, and in fall prevention programs for the elderly. However, it is still unclear whether incorporating balance tasks into a training program increases performance only in these specific tasks or if it affects balance in a more general way. The objective of this systematic literature review and meta-analysis was to determine to what extent the training of balance tasks can improve performance in non-trained balance tasks. A systematic literature search was performed in the online databases EMBASE, PubMed, SPORTDiscus and Web of Science. Articles related to balance training and testing in healthy populations published between January 1985 and March 2015 were considered. A total of 3093 articles were systematically evaluated. Randomized controlled trials were included that (i) used only balance tasks during the training, (ii) used at least two balance tests before and after training, and (iii) tested performance in the trained balance tasks and at least one non-trained balance task. Six studies with a total of 102 subjects met these criteria and were included into the meta-analysis. The quality of the studies was evaluated by means of the Physiotherapy Evidence Database (PEDro) scale. A random effect model was used to calculate the between-subject standardized mean differences (SMDbs) in order to quantify the effect of balance training on various kinds of balance measures relative to controls. The tested balance tasks in each study were classified into tasks that had been trained and tasks that had not been trained. For further analyses, the non-trained balance tasks were subdivided into tasks with similar or non-similar body position and similar or non-similar balance perturbation direction compared to the trained task. The effect of balance training on the performance of the trained balance tasks reached an SMDbs of 0.79 [95 % confidence interval (CI) 0.48-1.10], indicating a high effect in favor for the trained task, with no notable heterogeneity (I (2) = 0 %). The SMDbs in non-trained categories reached values between -0.07 (95 % CI -0.53 to 0.38) and 0.18 (95 % CI -0.27 to 0.64), with non-notable to moderate heterogeneity (I (2) = 0-32 %), indicating no effect of the balance training on the respective non-trained balance tasks. With six studies, the number of studies included in this meta-analysis is rather low. It remains unclear how the limited number of studies with considerable methodological diversity affects the outcome of the SMD calculations and thus the general outcome of the meta-analysis. In healthy populations, balance training can improve the performance in trained tasks, but may have only minor or no effects on non-trained tasks. Consequently, therapists and coaches should identify exactly those tasks that need improvement, and use these tasks in the training program and as a part of the test battery that evaluates the efficacy of the training program. Generic balance tasks-such as one-leg stance-may have little value as overall balance measures or when assessing the efficacy of specific training interventions.

Implementing the PM Programming Language using MPI and OpenMP - a New Tool for Programming Geophysical Models on Parallel Systems

NASA Astrophysics Data System (ADS)

Bellerby, Tim

2015-04-01

PM (Parallel Models) is a new parallel programming language specifically designed for writing environmental and geophysical models. The language is intended to enable implementers to concentrate on the science behind the model rather than the details of running on parallel hardware. At the same time PM leaves the programmer in control - all parallelisation is explicit and the parallel structure of any given program may be deduced directly from the code. This paper describes a PM implementation based on the Message Passing Interface (MPI) and Open Multi-Processing (OpenMP) standards, looking at issues involved with translating the PM parallelisation model to MPI/OpenMP protocols and considering performance in terms of the competing factors of finer-grained parallelisation and increased communication overhead. In order to maximise portability, the implementation stays within the MPI 1.3 standard as much as possible, with MPI-2 MPI-IO file handling the only significant exception. Moreover, it does not assume a thread-safe implementation of MPI. PM adopts a two-tier abstract representation of parallel hardware. A PM processor is a conceptual unit capable of efficiently executing a set of language tasks, with a complete parallel system consisting of an abstract N-dimensional array of such processors. PM processors may map to single cores executing tasks using cooperative multi-tasking, to multiple cores or even to separate processing nodes, efficiently sharing tasks using algorithms such as work stealing. While tasks may move between hardware elements within a PM processor, they may not move between processors without specific programmer intervention. Tasks are assigned to processors using a nested parallelism approach, building on ideas from Reyes et al. (2009). The main program owns all available processors. When the program enters a parallel statement then either processors are divided out among the newly generated tasks (number of new tasks < number of processors) or tasks are divided out among the available processors (number of tasks > number of processors). Nested parallel statements may further subdivide the processor set owned by a given task. Tasks or processors are distributed evenly by default, but uneven distributions are possible under programmer control. It is also possible to explicitly enable child tasks to migrate within the processor set owned by their parent task, reducing load unbalancing at the potential cost of increased inter-processor message traffic. PM incorporates some programming structures from the earlier MIST language presented at a previous EGU General Assembly, while adopting a significantly different underlying parallelisation model and type system. PM code is available at www.pm-lang.org under an unrestrictive MIT license. Reference Ruymán Reyes, Antonio J. Dorta, Francisco Almeida, Francisco de Sande, 2009. Automatic Hybrid MPI+OpenMP Code Generation with llc, Recent Advances in Parallel Virtual Machine and Message Passing Interface, Lecture Notes in Computer Science Volume 5759, 185-195

WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the soil and sediment task. Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holt, V.L.; Burgoa, B.B.

1993-12-01

This document is a site-specific work plan/health and safety checklist (WP/HSC) for a task of the Waste Area Grouping 2 Remedial Investigation and Site Investigation (WAG 2 RI&SI). Title 29 CFR Part 1910.120 requires that a health and safety program plan that includes site- and task-specific information be completed to ensure conformance with health- and safety-related requirements. To meet this requirement, the health and safety program plan for each WAG 2 RI&SI field task must include (1) the general health and safety program plan for all WAG 2 RI&SI field activities and (2) a WP/HSC for that particular field task.more » These two components, along with all applicable referenced procedures, must be kept together at the work site and distributed to field personnel as required. The general health and safety program plan is the Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169). The WP/HSCs are being issued as supplements to ORNL/ER-169.« less

WORK INSTRUCTION PROGRAMS FOR THE FOOD SERVICE INDUSTRY.

ERIC Educational Resources Information Center

KONZ, STEPHAN A.; MIDDLETON, RAYMONA

A PROJECT WAS INITIATED TO DEVELOP EFFICIENT WORK METHODS FOR 100 COMMON TASKS IN THE FOOD SERVICE INDUSTRY AND THEN TO PREPARE PROGRAMED LEARNING "PACKAGES" FOR EACH OF THESE TASKS FOR TRAINING POTENTIAL EMPLOYEES AND EMPLOYEES WITH LOWER LEVELS OF EDUCATION TO HOLD USEFUL JOBS. THE CONCEPT OF PROGRAMED LEARNING PACKAGES FOR FOOD SERVICING WAS…

Adaptive Competency Acquisition: Why LPN-to-ADN Career Mobility Education Programs Work.

ERIC Educational Resources Information Center

Coyle-Rogers, Patricia G.

Adaptive competencies are the skills required to effectively complete a particular task and are the congruencies (balance) between personal skills and task demands. The differences between the adaptive competency acquisition of students in licensed practical nurse (LPN) programs and associate degree nurse (ADN) programs were examined in a…

Program Predicts Time Courses of Human/Computer Interactions

NASA Technical Reports Server (NTRS)

Vera, Alonso; Howes, Andrew

2005-01-01

CPM X is a computer program that predicts sequences of, and amounts of time taken by, routine actions performed by a skilled person performing a task. Unlike programs that simulate the interaction of the person with the task environment, CPM X predicts the time course of events as consequences of encoded constraints on human behavior. The constraints determine which cognitive and environmental processes can occur simultaneously and which have sequential dependencies. The input to CPM X comprises (1) a description of a task and strategy in a hierarchical description language and (2) a description of architectural constraints in the form of rules governing interactions of fundamental cognitive, perceptual, and motor operations. The output of CPM X is a Program Evaluation Review Technique (PERT) chart that presents a schedule of predicted cognitive, motor, and perceptual operators interacting with a task environment. The CPM X program allows direct, a priori prediction of skilled user performance on complex human-machine systems, providing a way to assess critical interfaces before they are deployed in mission contexts.

Prostate Cancer Skeletal Metastases: Pathobiology and Interventions

DTIC Science & Technology

2005-02-01

promoter-reporter vectors (Months 7-10). ii. Create and characterize activity of 50 bp deletion mutants based on information from Task Ibi (Months 11-14...iii. Clone into reporter vector and characterize activity of 50 bp fragment (from Task lbii) (Months 15-19). iv. Create and characterize activity of...Gowen M, Lazner F, Dodds R, Kapadia R, Feild J, Tavaria M, Bertoncello I, Drake F, Zavarselk S, Tellis I, Hertzog P, Debouck C, Kola I. Cathepsin K

Growth of single crystals of organic salts with large second-order optical nonlinearities by solution processes for devices

NASA Technical Reports Server (NTRS)

Leslie, Thomas M.

1995-01-01

Data obtained from the electric field induced second harmonic generation (EFISH) and Kurtz Powder Methods will be provided to MSFC for further refinement of their method. A theoretical model for predicting the second-order nonlinearities of organic salts is being worked on. Another task is the synthesis of a number of salts with various counterions. Several salts with promising SHG activities and new salts will be tested for the presence of two crystalline forms. The materials will be recrystallized from dry and wet solvents and compared for SHG efficiency. Salts that have a high SHG efficiency and no tendency to form hydrates will be documented. The synthesis of these materials are included in this report. A third task involves method to aid in the growth of large, high quality single crystals by solution processes. These crystals will be characterized for their applicability in the fabrication of devices that will be incorporated into optical computers in future programs. Single crystals of optimum quality may be obtained by crystal growth in low-gravity. The final task is the design of a temperature lowering single crystal growth apparatus for ground based work. At least one prototype will be built.

Preparedness for practice: a systematic cross-specialty evaluation of the alignment between postgraduate medical education and independent practice.

PubMed

Dijkstra, Ids S; Pols, Jan; Remmelts, Pine; Brand, Paul L P

2015-02-01

Postgraduate medical education training programs strive to prepare their trainees optimally for independent practice. Several studies have shown, however, that new consultants feel inadequately prepared for practice, and that this increases the risk of stress and burnout. To analyze across specialties for which tasks and themes new consultants feel inadequately prepared. And, to identify themes that need improved attention in postgraduate medical education programs or after registration. 330 New consultants from all hospital specialities with accredited training programs who completed their training in the north-eastern educational region of The Netherlands between 2004 and 2010 received a questionnaire which was based on a previously validated generic task inventory. 143 respondents (43%) returned the questionnaire. They felt excellently prepared for 40 tasks, well prepared for 25 tasks, marginally sufficiently prepared for 18 tasks and insufficiently prepared for 8 tasks. Preparedness scores were lowest for tasks concerning management administration and leadership, research, end-of-life care, and patient safety-related communication. Surgical specialists felt better prepared for practice than medical specialists, which could not be explained by differences in general self-efficacy. Although new consultants felt well prepared for medical tasks, the scores of more generic tasks indicate that the alignment between the different phases of the medical education continuum and independent practice needs improvement.

Report on an Investigation into an Entry Level Clinical Doctorate for the Genetic Counseling Profession and a Survey of the Association of Genetic Counseling Program Directors.

PubMed

Reiser, Catherine; LeRoy, Bonnie; Grubs, Robin; Walton, Carol

2015-10-01

The master's degree is the required entry-level degree for the genetic counseling profession in the US and Canada. In 2012 the Association of Genetic Counseling Program Directors (AGCPD) passed resolutions supporting retention of the master's as the entry-level and terminal degree and opposing introduction of an entry-level clinical doctorate (CD) degree. An AGCPD workgroup surveyed directors of all 34 accredited training programs with the objective of providing the Genetic Counseling Advanced Degrees Task Force (GCADTF) with information regarding potential challenges if master's programs were required to transition to an entry-level CD. Program demographics, projected ability to transition to an entry-level CD, factors influencing ability to transition, and potential effects of transition on programs, students and the genetic counseling workforce were characterized. Two programs would definitely be able to transition, four programs would close, thirteen programs would be at risk to close and fourteen programs would probably be able to transition with varying degrees of difficulty. The most frequently cited limiting factors were economic, stress on clinical sites, and administrative approval of a new degree/program. Student enrollment under an entry-level CD model was projected to decrease by 26.2 %, negatively impacting the workforce pipeline. The results further illuminate and justify AGCPD's position to maintain the master's as the entry-level degree.

Project LASER: Learning about science, engineering, and research

NASA Technical Reports Server (NTRS)

1990-01-01

The number of American students entering science and engineering careers and their ranking in comparison with other countries is on the decline. This decline has alarmed Congress which, in 1987, established a Task Force on Women, Minorities, and the Handicapped in Science and Technology to define the problem and find solutions. If left unchanged, the task force has warned that the prospects for maintaining an advanced industrial society will diminish. NASA is supportive of the six goals outlined by the task force, which are paraphrase herein, and is carefully assessing its education programs to identify those offering the greatest potential for achieving the task force objectives with a reasonable range of resources. A major initiative is under way on behalf of NASA at its Marshall Space Flight Center, where highly effective features of several NASA education programs along with innovations are being integrated into a comprehensive pilot program. This program, dubbed Project LASER, is discussed.

Report on the Biological Monitoring Program at Paducah Gaseous Diffusion Plant December 1992--December 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kszos, L.A.; Hinzman, R.L.; Peterson, M.J.

1995-06-01

On September 24, 1987, the Commonwealth of Kentucky Natural Resources and Environmental Protection Cabinet issued an Agreed Order that required the development of a Biological Monitoring Program (BMP) for the Paducah Gaseous Diffusion Plant (PGDP). The goals of BMP are to demonstrate that the effluent limitations established for PGDP protect and maintain the use of Little Bayou and Big Bayou creeks for growth and propagation of fish and other aquatic life, characterize potential health and environmental impacts, document the effects of pollution abatement facilities on stream biota, and recommend any program improvements that would increase effluent treatability. The BMP formore » PGDP consists of three major tasks: effluent and ambient toxicity monitoring, bioaccumulation studies, and ecological surveys of stream communities (i.e., benthic macroinvertebrates and fish). This report includes ESD activities occurring from December 1992 to December 1993, although activities conducted outside this time period are included as appropriate.« less

Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.; Yoder, Dale

This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

Annual Report of the National Science Foundation on Contract NSF-C414 Task III July 1966 through June 1967.

ERIC Educational Resources Information Center

American Chemical Society, Columbus, OH. Chemical Abstracts Service.

This Annual Report describes in detail the work performed during the first year of Task III of Contract NSF-C414 and the present status of Task III work. The programs and achievements described constitute the first significant efforts to develop a user-oriented, cooperative program between major secondary scientific and technical information…

Deficits in novelty exploration after controlled cortical impact.

PubMed

Wagner, Amy K; Postal, Brett A; Darrah, Shaun D; Chen, Xiangbai; Khan, Amina S

2007-08-01

Experimental models of traumatic brain injury (TBI) have been utilized to characterize the behavioral derangements associated with brain trauma. Several studies exist characterizing motor function in the controlled cortical impact (CCI) injury model of TBI, but less research has focused on how CCI affects exploratory behavior. The goal of this study was to characterize deficits in three novelty exploration tasks after the CCI. Under anesthesia, 37 adult male Sprague Dawley rats received CCI (2.7 mm and 2.9 mm; 4 m/sec) over the right parietal cortex or sham surgery. For days 1-6 post-surgery, the beam balance and beam walking tasks were used to assess motor deficits. The Open Field, Y-Maze, and Free Choice Novelty (FCN) tasks were used to measure exploratory deficits from days 7-14 post-surgery. Injured rats displayed a significant, but transient, deficit on each motor task (p < 0.0001). Open Field results showed that injured rats had lower activity levels than shams (p < 0.0001), displayed less habituation to the task, and had more anxiety related behaviors (thigmotaxis) across days (p < 0.0001). Y-maze results suggest that injured rats spent less time in the novel arm versus the familiar arms when compared to shams (p < 0.0001). For FCN, injured rats were less active (p < 0.05) and spent less time and had fewer interactions with objects in the novel environment compared to shams (p < 0.05). These results suggest that several ethological factors contribute to exploratory deficits after CCI and can be effectively characterized with the behavioral tasks described. Future work will utilize these tasks to evaluate the neural substrates underlying exploratory deficits after TBI.

Development of a standardized job description for healthcare managers of metabolic syndrome management programs in Korean community health centers.

PubMed

Lee, Youngjin; Choo, Jina; Cho, Jeonghyun; Kim, So-Nam; Lee, Hye-Eun; Yoon, Seok-Jun; Seomun, GyeongAe

2014-03-01

This study aimed to develop a job description for healthcare managers of metabolic syndrome management programs using task analysis. Exploratory research was performed by using the Developing a Curriculum method, the Intervention Wheel model, and focus group discussions. Subsequently, we conducted a survey of 215 healthcare workers from 25 community health centers to verify that the job description we created was accurate. We defined the role of healthcare managers. Next, we elucidated the tasks of healthcare managers and performed needs analysis to examine the frequency, importance, and difficulty of each of their duties. Finally, we verified that our job description was accurate. Based on the 8 duties, 30 tasks, and 44 task elements assigned to healthcare managers, we found that the healthcare managers functioned both as team coordinators responsible for providing multidisciplinary health services and nurse specialists providing health promotion services. In terms of importance and difficulty of tasks performed by the healthcare managers, which were measured using a determinant coefficient, the highest-ranked task was planning social marketing (15.4), while the lowest-ranked task was managing human resources (9.9). A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs. Copyright © 2014. Published by Elsevier B.V.

A Generalized-Compliant-Motion Primitive

NASA Technical Reports Server (NTRS)

Backes, Paul G.

1993-01-01

Computer program bridges gap between planning and execution of compliant robotic motions developed and installed in control system of telerobot. Called "generalized-compliant-motion primitive," one of several task-execution-primitive computer programs, which receives commands from higher-level task-planning programs and executes commands by generating required trajectories and applying appropriate control laws. Program comprises four parts corresponding to nominal motion, compliant motion, ending motion, and monitoring. Written in C language.

Image Display and Manipulation System (IDAMS) program documentation, Appendixes A-D. [including routines, convolution filtering, image expansion, and fast Fourier transformation

NASA Technical Reports Server (NTRS)

Cecil, R. W.; White, R. A.; Szczur, M. R.

1972-01-01

The IDAMS Processor is a package of task routines and support software that performs convolution filtering, image expansion, fast Fourier transformation, and other operations on a digital image tape. A unique task control card for that program, together with any necessary parameter cards, selects each processing technique to be applied to the input image. A variable number of tasks can be selected for execution by including the proper task and parameter cards in the input deck. An executive maintains control of the run; it initiates execution of each task in turn and handles any necessary error processing.

Hunger in the Midst of Affluence: Task Force Combats Hunger in Contra Costa County.

ERIC Educational Resources Information Center

Fujii, Mary Lavender

1994-01-01

Research conducted by the Hunger Task Force in Contra Costa County (California) revealed a significant increase in the number of families, especially with young children, who live in poverty and who are going hungry. A food stamp outreach program, a countywide school breakfast program, and food distribution programs have been initiated. (LP)

"Doing Geography": Evaluating an Independent Geographic Inquiry Assessment Task in an Initial Teacher Education Program

ERIC Educational Resources Information Center

Harte, Wendy; Reitano, Paul

2016-01-01

The assessment task of the final course in a bachelor of secondary education program is examined for opportunities for preservice geography teachers to achieve the course aims of integrating, consolidating, applying, and reflecting on the knowledge and skills they have learned during their initial teacher education program. The results show that…

A computer program for the generation of logic networks from task chart data

NASA Technical Reports Server (NTRS)

Herbert, H. E.

1980-01-01

The Network Generation Program (NETGEN), which creates logic networks from task chart data is presented. NETGEN is written in CDC FORTRAN IV (Extended) and runs in a batch mode on the CDC 6000 and CYBER 170 series computers. Data is input via a two-card format and contains information regarding the specific tasks in a project. From this data, NETGEN constructs a logic network of related activities with each activity having unique predecessor and successor nodes, activity duration, descriptions, etc. NETGEN then prepares this data on two files that can be used in the Project Planning Analysis and Reporting System Batch Network Scheduling program and the EZPERT graphics program.

Materials processing in space program tasks

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1982-01-01

Active research areas as of the end of the fiscal year 1982 of the Materials Processing in Space Program, NASA-Office of Space and Terrestrial Applications, involving several NASA centers and other organizations are highlighted to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The program is described as well as its history, strategy and overall goal; the organizational structures and people involved are identified and each research task is described together with a list of recent publications. The tasks are grouped into four categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies.

Astronomy for a Better World: IAU OAD Task Force-1 Programs for Advancing Astronomy Education and Research in Universities in Developing Countries

NASA Astrophysics Data System (ADS)

Guinan, Edward; Kolenberg, Katrien

2015-03-01

We discuss the IAU Commission 46 and Office for Astronomy Development (OAD) programs that support advancing Astronomy education and research primarily in universities in developing countries. The bulk of these operational activities will be coordinated through the OAD's newly installed Task Force 1. We outline current (and future) IAU/OAD Task Force-1 programs that promote the development of University-level Astronomy at both undergraduate and graduate levels. Among current programs discussed are the past and future expanded activities of the International School for Young Astronomers (ISYA) and the Teaching Astronomy for Development (TAD) programs. The primary role of the ISYA program is the organization of a three week School for students for typically M.Sc. and Ph.D students. The ISYA is a very successful program that will now be offered more frequently through the generous support of the Kavli Foundation. The IAU/TAD program provides aid and resources for the development of teaching, education and research in Astronomy. The TAD program is dedicated to assist countries that have little or no astronomical activity, but that wish to develop or enhance Astronomy education. Over the last ten years, the ISYA and TAD programs have supported programs in Africa, Asia, Central America and the Caribbean, the Middle East, South East and West Asia, and South America. Several examples are given. Several new programs being considered by OAD Task Force-1 are also discussed. Other possible programs being considered are the introduction of modular Astronomy courses into the university curricula (or improve present courses) as well as providing access to ``remote learning`` courses and Virtual Astronomy labs in developing countries. Another possible new program would support visits of astronomers from technically advanced countries to spend their sabbatical leaves teaching and advising University Astronomy programs in developing countries. Suggestions for new Task Force -1 programs are also welcomed. Useful information about the participation of IAU members and volunteers in these programs will be discussed and practical information will be provided.

Methods of identifying potential vanpool riders.

DOT National Transportation Integrated Search

1977-01-01

Identifying potential vanpool riders and matching them to form pools are fundamental tasks in the initiation of a vanpool program. The manner in which these tasks are done will determine the costs and benefits of the program. This report presents the...

Chinese Preservice Teachers’ Professional Identity Links with Education Program Performance: The Roles of Task Value Belief and Learning Motivations

PubMed Central

Zhang, Yan; Hawk, Skyler T.; Zhang, Xiaohui; Zhao, Hongyu

2016-01-01

Professional identity is a key issue spanning the entirety of teachers’ career development. Despite the abundance of existing research examining professional identity, its link with occupation-related behavior at the primary career stage (i.e., GPA in preservice education) and the potential process that underlies this association is still not fully understood. This study explored the professional identity of Chinese preservice teachers, and its links with task value belief, intrinsic learning motivation, extrinsic learning motivation, and performance in the education program. Grade-point average (GPA) of courses (both subject and pedagogy courses) was examined as an indicator of performance, and questionnaires were used to measure the remaining variables. Data from 606 preservice teachers in the first 3 years of a teacher-training program indicated that: (1) variables in this research were all significantly correlated with each other, except the correlation between intrinsic learning motivation and program performance; (2) professional identity was positively linked to task value belief, intrinsic and extrinsic learning motivations, and program performance in a structural equation model (SEM); (3) task value belief was positively linked to intrinsic and extrinsic learning motivation; (4) higher extrinsic (but not intrinsic) learning motivation was associated with increased program performance; and (5) task value belief and extrinsic learning motivation were significant mediators in the model. PMID:27199810

Chinese Preservice Teachers' Professional Identity Links with Education Program Performance: The Roles of Task Value Belief and Learning Motivations.

PubMed

Zhang, Yan; Hawk, Skyler T; Zhang, Xiaohui; Zhao, Hongyu

2016-01-01

Professional identity is a key issue spanning the entirety of teachers' career development. Despite the abundance of existing research examining professional identity, its link with occupation-related behavior at the primary career stage (i.e., GPA in preservice education) and the potential process that underlies this association is still not fully understood. This study explored the professional identity of Chinese preservice teachers, and its links with task value belief, intrinsic learning motivation, extrinsic learning motivation, and performance in the education program. Grade-point average (GPA) of courses (both subject and pedagogy courses) was examined as an indicator of performance, and questionnaires were used to measure the remaining variables. Data from 606 preservice teachers in the first 3 years of a teacher-training program indicated that: (1) variables in this research were all significantly correlated with each other, except the correlation between intrinsic learning motivation and program performance; (2) professional identity was positively linked to task value belief, intrinsic and extrinsic learning motivations, and program performance in a structural equation model (SEM); (3) task value belief was positively linked to intrinsic and extrinsic learning motivation; (4) higher extrinsic (but not intrinsic) learning motivation was associated with increased program performance; and (5) task value belief and extrinsic learning motivation were significant mediators in the model.

Coal Combustion Science quarterly progress report, April--June 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardesty, D.R.; Hurt, R.H.; Baxter, L.L.

1992-09-01

The objective of this work is to support the Office of Fossil Energy in executing research on coal combustion science. This project consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center (PETC) Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency (IEA) Coal Combustion Science Project. Specific tasks include: The characterization of the physical and chemical processes that constitute the early devolatilization phase of coal combustion: Characterization of the combustion behavior of selected coals under conditions relevant to industria pulverized coal-fired furnaces; and to establish a quantitative understanding of themore » mechanisms and rates of transformation, fragmentation, and deposition of mineral matter in coal combustion environments as a function of coal type, particle size and temperature, the initial forms and distributions of mineral species in the unreacted coal, and the local gas temperature and composition.« less

Representation and Analysis of Real-Time Control Structures.

DTIC Science & Technology

1980-08-01

external processes which cannot be forced to cooperate with programmed processes through use of a synchronization primitive such as a semaphore [Dijkstre...amounts to each task, but the time slices are synchronized with program execution. The length of the codestrip is determined by the response time...which might be synchronous or asynchronous with respect to the executing task. The notation can represent total and partial orderings among its tasks, and

Proceedings: The Conference of the University/Urban Schools National Task Force: What Works in Urban Schools (3rd, San Francisco, CA, July 9-10, 1982).

ERIC Educational Resources Information Center

Bossone, Richard M., Ed.

Proceedings of the University/Urban Schools Task Force conference on what works in urban schools are summarized in this report. The future direction of the Task Force, articulated by conference participants, is described as a move toward the conceptualization and design of programs to teach thinking skills versus programs that mainly teach subject…

Study of monopropellants for electrothermal thrusters: Analytical task summary report

NASA Technical Reports Server (NTRS)

Kuenzly, J. D.; Grabbi, R.

1973-01-01

The feasibility of operating small thrust level electrothermal thrusters is determined with monopropellants other than MIL-grade hydrazine. The work scope includes analytical study, design and fabrication of demonstration thrusters, and an evaluation test program where monopropellants with freezing points lower than MIL-grade hydrazine are evaluated and characterized to determine their applicability to electrothermal thrusters for spacecraft attitude control. Results of propellant chemistry studies and performance analyses indicated that the most promising candidate monopropellants to be investigated are monomethylhydrazine, Aerozine-50, 77% hydrazine-23% hydrazine azide blend, and TRW formulated mixed hydrazine monopropellant (MHM) consisting of 35% hydrazine-50% monomethylhydrazine-15% ammonia.

Cosmetology: Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

These task analyses are designed to be used in combination with the "Trade and Industrial Education Service Area Resource" in order to implement competency-based education in the cosmetology program in Virginia. The task analysis document contains the task inventory, suggested task sequence lists, and content outlines for the secondary…

Commercial Photography: Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Endo, Paula; Morrell, Linda

These task analyses are designed to be used in combination with the "Trade and Industrial Education Service Area Resource" in order to implement competency-based education in the commercial photography program in Virginia. The task analysis document contains the task inventory, suggested task sequence lists, and content outlines for the…

76 FR 60863 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species Task Force (ANS Task Force). The ANS Task Force's purpose is to develop and implement a program for U.S. waters to prevent...

Nurse's Assistant: Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

These task analyses are designed to be used in combination with the "Health Occupations Education Service Area Resource" in order to implement competency-based education in the nurse's assistant program in Virginia. The task analysis document contains the task inventory, suggested task sequence lists, and content outlines for Nursing…

Masonry: Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

These task analyses are designed to be used in combination with the "Trade and Industrial Education Service Area Resource" in order to implement competency-based education in the masonry program in Virginia. The task analysis document contains the task inventory, suggested task sequence lists, and content outlines for the secondary…

The Impact of a Sports Vision Training Program in Youth Field Hockey Players

PubMed Central

Schwab, Sebastian; Memmert, Daniel

2012-01-01

The aim of this study was to investigate whether a sports vision training program improves the visual performance of youth male field hockey players, ages 12 to 16 years, after an intervention of six weeks compared to a control group with no specific sports vision training. The choice reaction time task at the D2 board (Learning Task I), the functional field of view task (Learning Task II) and the multiple object tracking (MOT) task (Transfer Task) were assessed before and after the intervention and again six weeks after the second test. Analyzes showed significant differences between the two groups for the choice reaction time task at the D2 board and the functional field of view task, with significant improvements for the intervention group and none for the control group. For the transfer task, we could not find statistically significant improvements for either group. The results of this study are discussed in terms of theoretical and practical implications. Key pointsPerceptual training with youth field hockey playersCan a sports vision training program improve the visual performance of youth male field hockey players, ages 12 to 16 years, after an intervention of six weeks compared to a control group with no specific sports vision training?The intervention was performed in the “VisuLab” as DynamicEye® SportsVision Training at the German Sport University Cologne.We ran a series of 3 two-factor univariate analysis of variance (ANOVA) with repeated measures on both within subject independent variables (group; measuring point) to examine the effects on central perception, peripheral perception and choice reaction time.The present study shows an improvement of certain visual abilities with the help of the sports vision training program. PMID:24150071

Characterization Testing of the Teledyne Passive Breadboard Fuel Cell Powerplant

NASA Technical Reports Server (NTRS)

Loyselle, Patricia; Prokopius, Kevin

2011-01-01

NASA's Exploration Technology Development Program (ETDP) is tasked with the development of enabling and enhancing technologies for NASA's exploration missions. As part of that initiative, the return to the Moon requires a reliable, efficient, and lightweight fuel cell powerplant system to provide power to the Altair Lunar Lander and for lunar surface systems. Fuel cell powerplants are made up of two basic parts; the fuel cell itself and the supporting ancillary subsystem. This subsystem is designed to deliver reactants to the fuel cell and remove product water and waste heat from the fuel cell. Typically, fuel cell powerplant ancillary subsystems rely upon pumps and active water separation techniques to accomplish these tasks for closed hydrogen/oxygen systems. In a typical system, these components are the largest contributors to the overall parasitic power load of the fuel cell powerplant. A potential step towards the development of an efficient lightweight power system is to maximize the use of "passive" or low-power ancillary components as a replacement to these high-power load components

Preparation of Faculty Members and Students to Be Citizen Leaders and Pharmacy Advocates

PubMed Central

Janke, Kristin K.; Boyle, Cynthia J.; Gianutsos, Gerald; Lindsey, Cameron C.; Moczygemba, Leticia R.; Whalen, Karen

2013-01-01

To identify characteristics and quality indicators of best practices for leadership and advocacy development in pharmacy education, a national task force on leadership development in pharmacy invited colleges and schools to complete a phone survey to characterize the courses, processes, and noteworthy practices for leadership and advocacy development at their institution. The literature was consulted to corroborate survey findings and identify additional best practices. Recommendations were derived from the survey results and literature review, as well as from the experience and expertise of task force members. Fifty-four institutions provided information about lecture-based and experiential curricular and noncurricular components of leadership and advocacy development. Successful programs have a supportive institutional culture, faculty and alumni role models, administrative and/or financial support, and a cocurricular thread of activities. Leadership and advocacy development for student pharmacists is increasingly important. The recommendations and suggestions provided can facilitate leadership and advocacy development at other colleges and schools of pharmacy. PMID:24371344

Preparation of faculty members and students to be citizen leaders and pharmacy advocates.

PubMed

Ross, Leigh Ann; Janke, Kristin K; Boyle, Cynthia J; Gianutsos, Gerald; Lindsey, Cameron C; Moczygemba, Leticia R; Whalen, Karen

2013-12-16

To identify characteristics and quality indicators of best practices for leadership and advocacy development in pharmacy education, a national task force on leadership development in pharmacy invited colleges and schools to complete a phone survey to characterize the courses, processes, and noteworthy practices for leadership and advocacy development at their institution. The literature was consulted to corroborate survey findings and identify additional best practices. Recommendations were derived from the survey results and literature review, as well as from the experience and expertise of task force members. Fifty-four institutions provided information about lecture-based and experiential curricular and noncurricular components of leadership and advocacy development. Successful programs have a supportive institutional culture, faculty and alumni role models, administrative and/or financial support, and a cocurricular thread of activities. Leadership and advocacy development for student pharmacists is increasingly important. The recommendations and suggestions provided can facilitate leadership and advocacy development at other colleges and schools of pharmacy.

Photon Statistics of Propagating Thermal Microwaves

NASA Astrophysics Data System (ADS)

Deppe, F.; Goetz, J.; Eder, P.; Fischer, M.; Pogorzalek, S.; Xie, E.; Fedorov, K. G.; Marx, A.; Gross, R.

In experiments with superconducting quantum circuits, characterizing the photon statistics of propagating microwave fields is a fundamental task. This task is in particular relevant for thermal fields, which are omnipresent noise sources in superconducting quantum circuits covering all relevant frequency regimes. We quantify the n2 + n photon number variance of thermal microwave photons emitted from a black-body radiator for mean photon numbers 0 . 05 <= n <= 1 . 5. In addition, we also use the fields as a sensitive probe for second-order decoherence effects of the qubit. Specifically, we investigate the influence of thermal fields on the low-frequency spectrum of the qubit parameter fluctuations. We find an enhacement of the white noise contribution of the noise power spectral density. Our data confirms a model of thermally activated two-level states interacting with the qubit. Supported by the German Research Foundation through FE 1564/1-1, the doctorate programs ExQM of the Elite Network of Bavaria, and the IMPRS Quantum Science and Technology.

77 FR 34355 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

..., training conditions, technological environment, types of jobs and tasks, types of programs needed, and... information on organizational goals (e.g., desired performance), training conditions (e.g., technological environment), specific jobs and tasks, types of programs needed, and target audience. Evaluation respondents...

Considerations for the establishment of a machinery monitoring analysis program for surface ships of the US Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strunk, W.D.

1987-01-01

Personnel at the Oak Ridge National Laboratory were tasked by the US Navy to assist in establishing a maintenance monitoring program for machinery aboard surface ships. Given the number of surface ships, the variety of locations in which they operate, the different types of equipment (rotating and reciprocating, as well as instrumentation), and the different procedures which control the operation and maintenance of a ship, it can be seen, apart from the logistics of organizing such a monitoring program, that the technical issues are as varied and numerous as the ships themselves. Unique methods and procedures have been developed tomore » perform the tasks required on a large scale. Among the specific tasks and technical issues addressed were the development and installation of a data collection and communication instrumentation system for each port, the qualification of measurement methodologies and techniques, the establishment of computer data bases, the evaluation of the instrumentation used, training of civilian and military personnel, development of machinery condition assessment aids using machine design and modal analysis information, and development of computer displays. After these tasks were completed and the appropriate resolution integrated into the program, the final task was the development of a method to continually evaluate the effectiveness of the program, using actual maintenance records.« less

Columbia River Basin Fish and Wildlife Program Annual Implementation Work Plan for Fiscal Year 1993.

DOE Office of Scientific and Technical Information (OSTI.GOV)

United States. Bonneville Power Administration; Northwest Power Planning Council; Columbia Basin Fish and Wildlife Authority

1992-09-01

The Columbia River Basin Fish and Wildlife Program (Program) was developed by the Northwest Power Planning Council (Council) in accordance with Public Law 96-501, the Pacific Northwest Electric Power Planning and Conservation Act (Act). The purpose of the Program is to guide the Bonneville Power Administration (BPA) and other Federal agencies in carrying out their responsibilities to protect, mitigate, and enhance fish and wildlife of the Columbia River Basin. The Annual Implementation World Plan (AIWP) presents BPA`s plans for implementing the Program during fiscal year (FY) 1993. The FY 1993 AIWP emphasizes continuation of 143 ongoing or projecting ongoing Programmore » projects, tasks, or task orders, most of which involve protection, mitigation, or enhancement of anadromous fishery resources. The FY 1993 AIWP also contains three new Program projects or tasks that are planned to start in FY 1993.« less

Predictive Cache Modeling and Analysis

DTIC Science & Technology

2011-11-01

metaheuristic /bin-packing algorithm to optimize task placement based on task communication characterization. Our previous work on task allocation showed...Cache Miss Minimization Technology To efficiently explore combinations and discover nearly-optimal task-assignment algorithms , we extended to our...it was possible to use our algorithmic techniques to decrease network bandwidth consumption by ~25%. In this effort, we adapted these existing

Spatial cluster detection using dynamic programming.

PubMed

Sverchkov, Yuriy; Jiang, Xia; Cooper, Gregory F

2012-03-25

The task of spatial cluster detection involves finding spatial regions where some property deviates from the norm or the expected value. In a probabilistic setting this task can be expressed as finding a region where some event is significantly more likely than usual. Spatial cluster detection is of interest in fields such as biosurveillance, mining of astronomical data, military surveillance, and analysis of fMRI images. In almost all such applications we are interested both in the question of whether a cluster exists in the data, and if it exists, we are interested in finding the most accurate characterization of the cluster. We present a general dynamic programming algorithm for grid-based spatial cluster detection. The algorithm can be used for both Bayesian maximum a-posteriori (MAP) estimation of the most likely spatial distribution of clusters and Bayesian model averaging over a large space of spatial cluster distributions to compute the posterior probability of an unusual spatial clustering. The algorithm is explained and evaluated in the context of a biosurveillance application, specifically the detection and identification of Influenza outbreaks based on emergency department visits. A relatively simple underlying model is constructed for the purpose of evaluating the algorithm, and the algorithm is evaluated using the model and semi-synthetic test data. When compared to baseline methods, tests indicate that the new algorithm can improve MAP estimates under certain conditions: the greedy algorithm we compared our method to was found to be more sensitive to smaller outbreaks, while as the size of the outbreaks increases, in terms of area affected and proportion of individuals affected, our method overtakes the greedy algorithm in spatial precision and recall. The new algorithm performs on-par with baseline methods in the task of Bayesian model averaging. We conclude that the dynamic programming algorithm performs on-par with other available methods for spatial cluster detection and point to its low computational cost and extendability as advantages in favor of further research and use of the algorithm.

Spatial cluster detection using dynamic programming

PubMed Central

2012-01-01

Background The task of spatial cluster detection involves finding spatial regions where some property deviates from the norm or the expected value. In a probabilistic setting this task can be expressed as finding a region where some event is significantly more likely than usual. Spatial cluster detection is of interest in fields such as biosurveillance, mining of astronomical data, military surveillance, and analysis of fMRI images. In almost all such applications we are interested both in the question of whether a cluster exists in the data, and if it exists, we are interested in finding the most accurate characterization of the cluster. Methods We present a general dynamic programming algorithm for grid-based spatial cluster detection. The algorithm can be used for both Bayesian maximum a-posteriori (MAP) estimation of the most likely spatial distribution of clusters and Bayesian model averaging over a large space of spatial cluster distributions to compute the posterior probability of an unusual spatial clustering. The algorithm is explained and evaluated in the context of a biosurveillance application, specifically the detection and identification of Influenza outbreaks based on emergency department visits. A relatively simple underlying model is constructed for the purpose of evaluating the algorithm, and the algorithm is evaluated using the model and semi-synthetic test data. Results When compared to baseline methods, tests indicate that the new algorithm can improve MAP estimates under certain conditions: the greedy algorithm we compared our method to was found to be more sensitive to smaller outbreaks, while as the size of the outbreaks increases, in terms of area affected and proportion of individuals affected, our method overtakes the greedy algorithm in spatial precision and recall. The new algorithm performs on-par with baseline methods in the task of Bayesian model averaging. Conclusions We conclude that the dynamic programming algorithm performs on-par with other available methods for spatial cluster detection and point to its low computational cost and extendability as advantages in favor of further research and use of the algorithm. PMID:22443103

How Can Writing Tasks Be Characterized in a Way Serving Pedagogical Goals and Automatic Analysis Needs?

ERIC Educational Resources Information Center

Quixal, Martí; Meurers, Detmar

2016-01-01

The paper tackles a central question in the field of Intelligent Computer-Assisted Language Learning (ICALL): How can language learning tasks be conceptualized and made explicit in a way that supports the pedagogical goals of current Foreign Language Teaching and Learning and at the same time provides an explicit characterization of the Natural…

Inappropriately Applying Natural Number Properties in Rational Number Tasks: Characterizing the Development of the Natural Number Bias through Primary and Secondary Education

ERIC Educational Resources Information Center

van Hoof, Jo; Verschaffel, Lieven; van Dooren, Wim

2015-01-01

The natural number bias is known to explain many difficulties learners have with understanding rational numbers. The research field distinguishes three aspects where natural number properties are sometimes inappropriately applied in rational number tasks: density, size, and operations. The overall goal of this study was to characterize the…

An Internal Data Non-hiding Type Real-time Kernel and its Application to the Mechatronics Controller

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

For the mechatronics equipment controller that controls robots and machine tools, high-speed motion control processing is essential. The software system of the controller like other embedded systems is composed of three layers software such as real-time kernel layer, middleware layer, and application software layer on the dedicated hardware. The application layer in the top layer is composed of many numbers of tasks, and application function of the system is realized by the cooperation between these tasks. In this paper we propose an internal data non-hiding type real-time kernel in which customizing the task control is possible only by change in the program code of the task side without any changes in the program code of real-time kernel. It is necessary to reduce the overhead caused by the real-time kernel task control for the speed-up of the motion control of the mechatronics equipment. For this, customizing the task control function is needed. We developed internal data non-cryptic type real-time kernel ZRK to evaluate this method, and applied to the control of the multi system automatic lathe. The effect of the speed-up of the task cooperation processing was able to be confirmed by combined task control processing on the task side program code using an internal data non-hiding type real-time kernel ZRK.

Effects of an age-specific anterior cruciate ligament injury prevention program on lower extremity biomechanics in children.

PubMed

DiStefano, Lindsay J; Blackburn, J Troy; Marshall, Stephen W; Guskiewicz, Kevin M; Garrett, William E; Padua, Darin A

2011-05-01

Implementing an anterior cruciate ligament injury prevention program to athletes before the age at which the greatest injury risk occurs (15-17 years) is important from a prevention standpoint. However, it is unknown whether standard programs can modify lower extremity biomechanics in pediatric populations or if specialized training is required. To compare the effects of traditional and age-specific pediatric anterior cruciate ligament injury prevention programs on lower extremity biomechanics during a cutting task in youth athletes. The authors hypothesized that the age-specific pediatric program would result in greater sagittal plane motion (ie, hip and knee flexion) and less motion in the transverse and frontal plane (ie, knee valgus, knee and hip rotation) as compared with the traditional program. Randomized controlled trial; Level of evidence, 1. Sixty-five youth soccer athletes (38 boys, 27 girls) volunteered to participate. The mean age of participants was 10 ± 1 years. Teams (n, 7) were cluster randomized to a pediatric injury prevention program, a traditional injury prevention program, or a control group. The pediatric program was modified from the traditional program to include more feedback, progressions, and variety. Teams performed their programs as part of their normal warm-up routine. Three-dimensional lower extremity biomechanics were assessed during a sidestep cutting task before and after completion of the 9-week intervention period. The pediatric program reduced the amount of knee external rotation at initial ground contact during the cutting task, F ((2,62)) = 3.79, P = .03 (change: pediatric, 7.73° ± 10.71°; control, -0.35° ± 7.76°), as compared with the control group after the intervention period. No other changes were observed. The injury prevention program designed for a pediatric population modified only knee rotation during the cutting task, whereas the traditional program did not result in any changes in cutting biomechanics. These findings suggest limited effectiveness of both programs for athletes younger than 12 years of age in terms of biomechanics during a cutting task.

Flexible explicit but rigid implicit learning in a visuomotor adaptation task

PubMed Central

Bond, Krista M.

2015-01-01

There is mounting evidence for the idea that performance in a visuomotor rotation task can be supported by both implicit and explicit forms of learning. The implicit component of learning has been well characterized in previous experiments and is thought to arise from the adaptation of an internal model driven by sensorimotor prediction errors. However, the role of explicit learning is less clear, and previous investigations aimed at characterizing the explicit component have relied on indirect measures such as dual-task manipulations, posttests, and descriptive computational models. To address this problem, we developed a new method for directly assaying explicit learning by having participants verbally report their intended aiming direction on each trial. While our previous research employing this method has demonstrated the possibility of measuring explicit learning over the course of training, it was only tested over a limited scope of manipulations common to visuomotor rotation tasks. In the present study, we sought to better characterize explicit and implicit learning over a wider range of task conditions. We tested how explicit and implicit learning change as a function of the specific visual landmarks used to probe explicit learning, the number of training targets, and the size of the rotation. We found that explicit learning was remarkably flexible, responding appropriately to task demands. In contrast, implicit learning was strikingly rigid, with each task condition producing a similar degree of implicit learning. These results suggest that explicit learning is a fundamental component of motor learning and has been overlooked or conflated in previous visuomotor tasks. PMID:25855690

Materials processing in space program tasks

NASA Technical Reports Server (NTRS)

Naumann, R. J. (Editor)

1980-01-01

The history, strategy, and overall goal of NASA's Office of Space and Terrestrial Applications program for materials processing in space are described as well as the organizational structures and personnel involved. An overview of each research task is presented and recent publications are listed.

Operate A Chemical Surety Program And Studies Supporting The Medical Chemical Defense Research Program

DTIC Science & Technology

2010-05-01

23 Task Execution Plan 34 – Temperature Testing of Pyridostigmine Bromide (PB) .......... 23 KEY RESEARCH ACCOMPLISHMENTS...29, 2010. Staff was assembled and materials have been ordered. Task Execution Plan (TEP) 0034 – Temperature Testing of Pyridostigmine Bromide

Work Skills for Prevocational Training.

ERIC Educational Resources Information Center

Skaggs, Donald Ray

A prevocational work skills training program for moderately retarded students emphasizes the need for developmentally appropriate tasks, concern for increasing students' attention span, orderly arrangement within tasks, and increased proficiency after training. Major units in the program focus on concepts of similarity and difference, large and…

Core stability exercise is as effective as task-oriented motor training in improving motor proficiency in children with developmental coordination disorder: a randomized controlled pilot study.

PubMed

Au, Mei K; Chan, Wai M; Lee, Lin; Chen, Tracy Mk; Chau, Rosanna Mw; Pang, Marco Yc

2014-10-01

To compare the effectiveness of a core stability program with a task-oriented motor training program in improving motor proficiency in children with developmental coordination disorder (DCD). Randomized controlled pilot trial. Outpatient unit in a hospital. Twenty-two children diagnosed with DCD aged 6-9 years were randomly allocated to the core stability program or the task-oriented motor program. Both groups underwent their respective face-to-face training session once per week for eight consecutive weeks. They were also instructed to carry out home exercises on a daily basis during the intervention period. Short Form of the Bruininks-Oseretsky Test of Motor Proficiency (Second Edition) and Sensory Organization Test at pre- and post-intervention. Intention-to-treat analysis revealed no significant between-group difference in the change of motor proficiency standard score (P=0.717), and composite equilibrium score derived from the Sensory Organization Test (P=0.100). Further analysis showed significant improvement in motor proficiency in both the core stability (mean change (SD)=6.3(5.4); p=0.008) and task-oriented training groups (mean change(SD)=5.1(4.0); P=0.007). The composite equilibrium score was significantly increased in the task-oriented training group (mean change (SD)=6.0(5.5); P=0.009), but not in the core stability group (mean change(SD) =0.0(9.6); P=0.812). In the task-oriented training group, compliance with the home program was positively correlated with change in motor proficiency (ρ=0.680, P=0.030) and composite equilibrium score (ρ=0.638, P=0.047). The core stability exercise program is as effective as task-oriented training in improving motor proficiency among children with DCD. © The Author(s) 2014.

Children's Physical Activity and On-Task Behavior Following Active Academic Lessons: 2017 National Association for Kinesiology in Higher Education Hally Beth Poindexter Young Scholar Address

ERIC Educational Resources Information Center

Goh, Tan Leng

2017-01-01

Sitting for extended periods of time is detrimental to children's physical health and may cause off-task behavior in the classroom. The purpose of this study was to examine the effect of a classroom physical activity (PA) program, TAKE 10!®, on children's PA and on-task behavior. Participants in the program included 137 children from six classes…

Staff Report on the Guaranteed Student Loan Program, Belmont Task Force Recommendations. Prepared for the Subcommittee on Postsecondary Education of the Committee on Education and Labor.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

Recommendations of the Belmont Task Force concerning the problem of student loan defaults are offered to the U.S. House of Representatives. The task force concludes that the purpose of the Guaranteed Student Loan (GSL) program has changed significantly in the last decade. While originally established as a loan of convenience for middle-income…

Waste isolation safety assessment program. Task 4. Third contractor information meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-06-01

The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less

Three Techniques for Task Analysis: Examples from the Nuclear Utilities.

ERIC Educational Resources Information Center

Carlisle, Kenneth E.

1984-01-01

Discusses three task analysis techniques utilized at the Palo Verde Nuclear Generating Station to review training programs: analysis of (1) job positions, (2) procedures, and (3) instructional presentations. All of these include task breakdown, relationship determination, and task restructuring. (MBR)

Large-Format Dual-Counter Pixelated X-Ray Detector Platform: Phase II Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Adam; Williams, George; Huntington, Andrew

2016-10-10

Within the program, a Voxtel led team demonstrated both prototype (48 x 48, 130-μm pitch, VX-798) and full-format (192 x 192, 100-μm pitch, VX-810) versions of a high-dynamic-range, x-ray photon-counting (HDR-XPC) sensor. Within the program the following tasks were completed: 1) integration and evaluation of the VX-798 prototype camera at the Advanced Photon Source beamline at Argonne National Labs; 2) the design, simulation, and fabrication of the full-format VX-810 ROIC was completed; 3) fabrication of thick, fully depleted silicon photodiodes optimized for x-ray photon collection; 4) hybridization of the VX-810 ROIC to the photodiode array in the creation of themore » optically sensitive FPA (FPA), and 4) development of an evaluation camera to enable electrical and optical characterization of the sensor.« less

Principles of Genetic Circuit Design

PubMed Central

Brophy, Jennifer A.N.; Voigt, Christopher A.

2014-01-01

Cells are able to navigate environments, communicate, and build complex patterns by initiating gene expression in response to specific signals. Engineers need to harness this capability to program cells to perform tasks or build chemicals and materials that match the complexity seen in nature. This review describes new tools that aid the construction of genetic circuits. We show how circuit dynamics can be influenced by the choice of regulators and changed with expression “tuning knobs.” We collate the failure modes encountered when assembling circuits, quantify their impact on performance, and review mitigation efforts. Finally, we discuss the constraints that arise from operating within a living cell. Collectively, better tools, well-characterized parts, and a comprehensive understanding of how to compose circuits are leading to a breakthrough in the ability to program living cells for advanced applications, from living therapeutics to the atomic manufacturing of functional materials. PMID:24781324

Increases in Emotional Intelligence After an Online Training Program Are Associated With Better Decision-Making on the Iowa Gambling Task.

PubMed

Alkozei, Anna; Smith, Ryan; Demers, Lauren A; Weber, Mareen; Berryhill, Sarah M; Killgore, William D S

2018-01-01

Higher levels of emotional intelligence have been associated with better inter and intrapersonal functioning. In the present study, 59 healthy men and women were randomized into either a three-week online training program targeted to improve emotional intelligence ( n = 29), or a placebo control training program targeted to improve awareness of nonemotional aspects of the environment ( n = 30). Compared to placebo, participants in the emotional intelligence training group showed increased performance on the total emotional intelligence score of the Mayer-Salovey-Caruso Emotional Intelligence Test, a performance measure of emotional intelligence, as well as subscales of perceiving emotions and facilitating thought. Moreover, after emotional intelligence training, but not after placebo training, individuals displayed the ability to arrive at optimal performance faster (i.e., they showed a faster learning rate) during an emotion-guided decision-making task (i.e., the Iowa Gambling Task). More specifically, although both groups showed similar performance at the start of the Iowa Gambling Task from pre- to posttraining, the participants in the emotional intelligence training group learned to choose more advantageous than disadvantageous decks than those in the placebo training group by the time they reached the "hunch" period of the task (i.e., the point in the task when implicit task learning is thought to have occurred). Greater total improvements in performance on the Iowa Gambling Task from pre- to posttraining in the emotional intelligence training group were also positively correlated with pre- to posttraining changes in Mayer-Salovey-Caruso Emotional Intelligence Test scores, in particular with changes in the ability to perceive emotions. The present study provides preliminary evidence that emotional intelligence can be trained with the help of an online training program targeted at adults; it also suggests that changes in emotional intelligence, as a result of such a program, can lead to improved emotion-guided decision-making.

Comparison of the effects of mobile technology AAC apps on programming visual scene displays.

PubMed

Caron, Jessica; Light, Janice; Davidoff, Beth E; Drager, Kathryn D R

2017-12-01

Parents and professionals who work with individuals who use augmentative and alternative communication (AAC) face tremendous time pressures, especially when programming vocabulary in AAC technologies. System design (from programming functions to layout options) necessitates a range of skills related to operational competence and can impose intensive training demands for communication partners. In fact, some AAC applications impose considerable learning demands, which can lead to increased time to complete the same programming tasks. A within-subject design was used to investigate the comparative effects of three visual scene display AAC apps (GoTalk Now, AutisMate, EasyVSD) on the programming times for three off-line programming activities, by adults who were novices to programming AAC apps. The results indicated all participants were able to create scenes and add hotspots during off-line programming tasks with minimal self-guided training. The AAC app that had the least number of programming steps, EasyVSD, resulted in the fastest completion times across the three programming tasks. These results suggest that by simplifying the operational requirements of AAC apps the programming time is reduced, which may allow partners to better support individuals who use AAC.

Analyzing Process Data from Game/Scenario-Based Tasks: An Edit Distance Approach

ERIC Educational Resources Information Center

Hao, Jiangang; Shu, Zhan; von Davier, Alina

2015-01-01

Students' activities in game/scenario-based tasks (G/SBTs) can be characterized by a sequence of time-stamped actions of different types with different attributes. For a subset of G/SBTs in which only the order of the actions is of great interest, the process data can be well characterized as a string of characters (i.e., action string) if we…

Revised and extended UTILITIES for the RATIP package

NASA Astrophysics Data System (ADS)

Nikkinen, J.; Fritzsche, S.; Heinäsmäki, S.

2006-09-01

During the last years, the RATIP package has been found useful for calculating the excitation and decay properties of free atoms. Based on the (relativistic) multiconfiguration Dirac-Fock method, this program is used to obtain accurate predictions of atomic properties and to analyze many recent experiments. The daily work with this package made an extension of its UTILITIES [S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163] desirable in order to facilitate the data handling and interpretation of complex spectra. For this purpose, we make available an enlarged version of the UTILITIES which mainly supports the comparison with experiment as well as large Auger computations. Altogether 13 additional tasks have been appended to the program together with a new menu structure to improve the interactive control of the program. Program summaryTitle of program: RATIP Catalogue identifier: ADPD_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADPD_v2_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions: none Reference in CPC to previous version: S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163 Catalogue identifier of previous version: ADPD Authors of previous version: S. Fritzsche, Department of Physics, University of Kassel, Heinrich-Plett-Strasse 40, D-34132 Kassel, Germany Does the new version supersede the original program?: yes Computer for which the new version is designed and others on which it has been tested: IBM RS 6000, PC Pentium II-IV Installations: University of Kassel (Germany), University of Oulu (Finland) Operating systems: IBM AIX, Linux, Unix Program language used in the new version: ANSI standard Fortran 90/95 Memory required to execute with typical data: 300 kB No. of bits in a word: All real variables are parameterized by a selected kind parameter and, thus, can be adapted to any required precision if supported by the compiler. Currently, the kind parameter is set to double precision (two 32-bit words) as used also for other components of the RATIP package [S. Fritzsche, C.F. Fischer, C.Z. Dong, Comput. Phys. Comm. 124 (2000) 341; G. Gaigalas, S. Fritzsche, Comput. Phys. Comm. 134 (2001) 86; S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163; S. Fritzsche, J. Elec. Spec. Rel. Phen. 114-116 (2001) 1155] No. of lines in distributed program, including test data, etc.:231 813 No. of bytes in distributed program, including test data, etc.: 3 977 387 Distribution format: tar.gzip file Nature of the physical problem: In order to describe atomic excitation and decay properties also quantitatively, large-scale computations are often needed. In the framework of the RATIP package, the UTILITIES support a variety of (small) tasks. For example, these tasks facilitate the file and data handling in large-scale applications or in the interpretation of complex spectra. Method of solution: The revised UTILITIES now support a total of 29 subtasks which are mainly concerned with the manipulation of output data as obtained from other components of the RATIP package. Each of these tasks are realized by one or several subprocedures which have access to the corresponding modules of the main components. While the main menu defines seven groups of subtasks for data manipulations and computations, a particular task is selected from one of these group menus. This allows to enlarge the program later if technical support for further tasks will become necessary. For each selected task, an interactive dialog about the required input and output data as well as a few additional information are printed during the execution of the program. Reasons for the new version: The requirement for enlarging the previous version of the UTILITIES [S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163] arose from the recent application of the RATIP package for large-scale radiative and Auger computations. A number of new subtasks now refer to the handling of Auger amplitudes and their proper combination in order to facilitate the interpretation of complex spectra. A few further tasks, such as the direct access to the one-electron matrix elements for some given set of orbital functions, have been found useful also in the analysis of data. Summary of revisions: extraction and handling of atomic data within the framework of RATIP. With the revised version, we now 'add' another 13 tasks which refer to the manipulation of data files, the generation and interpretation of Auger spectra, the computation of various one- and two-electron matrix elements as well as the evaluation of momentum densities and grid parameters. Owing to the rather large number of subtasks, the main menu has been divided into seven groups from which the individual tasks can be selected very similarly as before. Typical running time: The program responds promptly for most of the tasks. The responding time for some tasks, such as the generation of a relativistic momentum density, strongly depends on the size of the corresponding data files and the number of grid points. Unusual features of the program: A total of 29 different tasks are supported by the program. Starting from the main menu, the user is guided interactively through the program by a dialog and a few additional explanations. For each task, a short summary about its function is displayed before the program prompts for all the required input data.

Natural Resources Management: Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

James Madison Univ., Harrisonburg, VA.

This task analysis guide is intended to help teachers and administrators develop instructional materials and implement competency-based education for natural resources management courses in the agricultural resources program. Section 1 contains a validated task inventory for natural resources management. For each task, applicable information…

Alcohol impairment of performance on steering and discrete tasks in a driving simulator

DOT National Transportation Integrated Search

1974-12-01

In this program a simplified laboratory simulator was developed to test two types of tasks used in driving on the open road: a continuous "steering task" to regulate against gust induced disturbances and an intermittent "discrete response task" requi...

Report by the International Space Station (ISS) Management and Cost Evaluation (IMCE) Task Force

NASA Technical Reports Server (NTRS)

Young, A. Thomas; Kellogg, Yvonne (Technical Monitor)

2001-01-01

The International Space Station (ISS) Management and Cost Evaluation Task Force (IMCE) was chartered to conduct an independent external review and assessment of the ISS cost, budget, and management. In addition, the Task Force was asked to provide recommendations that could provide maximum benefit to the U.S. taxpayers and the International Partners within the President's budget request. The Task Force has made the following principal findings: (1) The ISS Program's technical achievements to date, as represented by on-orbit capability, are extraordinary; (2) The Existing ISS Program Plan for executing the FY 02-06 budget is not credible; (3) The existing deficiencies in management structure, institutional culture, cost estimating, and program control must be acknowledged and corrected for the Program to move forward in a credible fashion; (4) Additional budget flexibility, from within the Office of Space Flight (OSF) must be provided for a credible core complete program; (5) The research support program is proceeding assuming the budget that was in place before the FY02 budget runout reduction of $1B; (6) There are opportunities to maximize research on the core station program with modest cost impact; (7) The U.S. Core Complete configuration (three person crew) as an end-state will not achieve the unique research potential of the ISS; (8) The cost estimates for the U.S.-funded enhancement options (e.g., permanent seven person crew) are not sufficiently developed to assess credibility. After these findings, the Task Force has formulated several primary recommendations which are published here and include: (1) Major changes must be made in how the ISS program is managed; (2) Additional cost reductions are required within the baseline program; (3) Additional funds must be identified and applied from the Human Space Flight budget; (4) A clearly defined program with a credible end-state, agreed to by all stakeholders, must be developed and implemented.

Creating a Novel Cardiac Limited Ultrasound Exam Curriculum for Internal Medical Residency: Four Unanticipated Tasks

PubMed Central

Nardi, Melissa; Shaw, David J.; Amundson, Stanley A.; Phan, James N.; Kimura, Bruce J.

2016-01-01

Over the past two decades, our internal medicine residency has created a unique postgraduate education in internal medicine by incorporating a formal curriculum in point-of-care cardiac ultrasound as a mandatory component. The details regarding content and implementation were critical to the initial and subsequent success of this novel program. In this paper, we discuss the evidence-based advances, considerations, and pitfalls that we have encountered in the program's development through the discussion of four unanticipated tasks unique to a point-of-care ultrasound curriculum. The formatted discussion of these tasks will hopefully assist development of ultrasound programs at other institutions. PMID:29349308

Creating a Novel Cardiac Limited Ultrasound Exam Curriculum for Internal Medical Residency: Four Unanticipated Tasks.

PubMed

Nardi, Melissa; Shaw, David J; Amundson, Stanley A; Phan, James N; Kimura, Bruce J

2016-01-01

Over the past two decades, our internal medicine residency has created a unique postgraduate education in internal medicine by incorporating a formal curriculum in point-of-care cardiac ultrasound as a mandatory component. The details regarding content and implementation were critical to the initial and subsequent success of this novel program. In this paper, we discuss the evidence-based advances, considerations, and pitfalls that we have encountered in the program's development through the discussion of four unanticipated tasks unique to a point-of-care ultrasound curriculum. The formatted discussion of these tasks will hopefully assist development of ultrasound programs at other institutions.

Large Engine Technology Program. Task 22: Variable Geometry Concepts for Rich-Quench-Lean Combustors

NASA Technical Reports Server (NTRS)

Tacina, Robert R. (Technical Monitor); Cohen, J. M.; Padget, F. C.; Kwoka, D.; Wang, Q.; Lohmann, R. P.

2005-01-01

The objective of the task reported herein was to define, evaluate, and optimize variable geometry concepts suitable for use with a Rich-Quench-Lean (RQL) combustor. The specific intent was to identify approaches that would satisfy High Speed Civil Transport (HSCT) cycle operational requirements with regard to fuel-air ratio turndown capability, ignition, and stability margin without compromising the stringent emissions, performance, and reliability goals that this combustor would have to achieve. Four potential configurations were identified and three of these were refined and tested in a high-pressure modular RQL combustor rig. The tools used in the evolution of these concepts included models built with rapid fabrication techniques that were tested for airflow characteristics to confirm sizing and airflow management capability, spray patternation, and atomization characterization tests of these models and studies that were supported by Computational Fluid Dynamics analyses. Combustion tests were performed with each of the concepts at supersonic cruise conditions and at other critical conditions in the flight envelope, including the transition points of the variable geometry system, to identify performance, emissions, and operability impacts. Based upon the cold flow characterization, emissions results, acoustic behavior observed during the tests and consideration of mechanical, reliability, and implementation issues, the tri-swirler configuration was selected as the best variable geometry concept for incorporation in the RQL combustor evolution efforts for the HSCT.

Medical Assisting Learning Guides.

ERIC Educational Resources Information Center

Meyer, Rose

Eight student learning guides are provided for a medical assisting program at the secondary, postsecondary, or adult level. Each learning guide is composed of these component parts: a title page that states the task, purpose, program and task numbers, estimated time, and prerequisites; an optional learning contract that includes terminal…

Program Improvement Project for Industrial Education. Annual Report.

ERIC Educational Resources Information Center

Shaeffer, Bruce W.

Designed to improve industrial education programs through the development of minimum uniform quality standards, a project developed a task list, educationally sequenced the identified tasks, and developed a recommended shop layout and equipment list for four occupational areas: diesel repair, appliance repair, office machine repair, and small…

Task Analysis for Legal Assistant Program. Final Report.

ERIC Educational Resources Information Center

Schrader, Marvin A.; Knight, John

The Legal Assistant Task Analysis Project was undertaken to provide data related to the importance of tasks and the frequency of tasks that are, or could be, assigned to an assistant. In order to accomplish this, a task survey form was constructed and distributed to a sample of attorneys in (1) private practice, (2) companies or corporations, and…

Task Inventory Construction. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 14.

ERIC Educational Resources Information Center

Kishi, Akemi

To aid in the construction of effective task analysis inventories, this technical report discusses: (1) an optimum questionnaire length that adequately covers Marine tasks without unduly fatiguing respondents; (2) procedures for the phrasing of task statements to avoid ambiguities and be understandable to as broad a range of Marines as is…

Summary document of tasks performed on the Shuttle-C/NLS contract

NASA Technical Reports Server (NTRS)

1993-01-01

During FY92, USBI performed many programmatic related tasks. These programmatic tasks have been categorized as follows: (1) acquisition; (2) project engineering/program planning; and (3) cost. The reports associated with these tasks follow in paragraphs 1.1.1 through 1.3.3. Proceeding each task report is a brief description of the contents contained within.

Task Lists for Health Occupations. Radiologic Aide. Activity Aide. Optometric Assistant. Physical Therapy Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lathrop, Janice

These task lists contain employability skills and tasks for the following health occupations: radiologic aide, activity aide, physical therapy aide, and optometric assistant. The duties and tasks found in these lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs. Employability skills…

On-Task in a Box: An Evaluation of a Package-Ready Intervention for Increasing Levels of On-Task Behavior and Academic Performance

ERIC Educational Resources Information Center

King, Brian; Radley, Keith C.; Jenson, William R.; O'Neill, Robert E.

2017-01-01

The present study tested the efficacy of the On-Task in a Box program for increasing on-task behavior and academic accuracy of highly off-task students. Six students in 2nd and 3rd grades were identified by their classroom teacher as highly off-task. Following identification, the students participated in the On-Task in a Box intervention. Results…

SHC Project 3.63, Task 2, Beneficial Use of Waste Materials

EPA Science Inventory

SHC Project 3.63, Task 2, “Beneficial Use of Waste Materials”, is designed to conduct research and analyses to characterize and quantify the risks and benefits of using or reusing waste materials. There are 6 primary research areas in Task 2 that cover a broad spectr...

Self-Reported Physical Tasks and Exercise Training in Special Weapons and Tactics (SWAT) Teams.

PubMed

Davis, Matthew R; Easter, Richard L; Carlock, Jonathan M; Weiss, Lawrence W; Longo, Elizabeth A; Smith, Lisa M; Dawes, J Jay; Schilling, Brian K

2016-11-01

Davis, MR, Easter, RL, Carlock, JM, Weiss, LW, Longo, EA, Smith, LM, Dawes, JJ, and Schilling, BK. Self-reported physical tasks and exercise training in Special Weapons and Tactics (SWAT) teams. J Strength Cond Res 30(11): 3242-3248, 2016-Little research has been done examining the most physically demanding tasks a SWAT officer may perform in the line of duty. Our objective was to analyze the rankings of tasks by SWAT officers based on frequency, difficulty, and importance and assess if training is addressing traits needed for successful task completion. A survey was designed using Qualtrics (Qualtrics Labs Inc). The survey had a demographics section, performance section, and training section. Officers were contacted by phone or e-mail and asked about interest in participating. Officers who agreed were sent the survey. Our results found a strong correlation between frequency of task and importance (r = 0.69, p = 0.001), and a moderate correlation was found between task difficulty and importance (r = 0.37, p = 0.005). Task rankings were averaged across the 3 domains to assess "overall" importance, and the top 3 tasks were assessed for necessary traits for successful performance. Power and strength were determined to be the most important traits for successful performance. Officers ranked the top 2 focuses of their training program in the training section as stamina/muscular endurance and cardiovascular/respiratory endurance. Training programs for SWAT officers should be developed to improve performance of the tasks with the highest "overall" importance. Therefore, a training program should emphasize strength and power improvements while not neglecting other measures of fitness.

49 CFR 195.505 - Qualification program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... that the individual's performance of a covered task contributed to an accident as defined in Part 195... tasks; (b) Ensure through evaluation that individuals performing covered tasks are qualified; (c) Allow individuals that are not qualified pursuant to this subpart to perform a covered task if directed and observed...

NASA-Ames workload research program

NASA Technical Reports Server (NTRS)

Hart, Sandra

1988-01-01

Research has been underway for several years to develop valid and reliable measures and predictors of workload as a function of operator state, task requirements, and system resources. Although the initial focus of this research was on aeronautics, the underlying principles and methodologies are equally applicable to space, and provide a set of tools that NASA and its contractors can use to evaluate design alternatives from the perspective of the astronauts. Objectives and approach of the research program are described, as well as the resources used in conducting research and the conceptual framework around which the program evolved. Next, standardized tasks are described, in addition to predictive models and assessment techniques and their application to the space program. Finally, some of the operational applications of these tasks and measures are reviewed.

Mechanism to support generic collective communication across a variety of programming models

DOEpatents

Almasi, Gheorghe [Ardsley, NY; Dozsa, Gabor [Ardsley, NY; Kumar, Sameer [White Plains, NY

2011-07-19

A system and method for supporting collective communications on a plurality of processors that use different parallel programming paradigms, in one aspect, may comprise a schedule defining one or more tasks in a collective operation, an executor that executes the task, a multisend module to perform one or more data transfer functions associated with the tasks, and a connection manager that controls one or more connections and identifies an available connection. The multisend module uses the available connection in performing the one or more data transfer functions. A plurality of processors that use different parallel programming paradigms can use a common implementation of the schedule module, the executor module, the connection manager and the multisend module via a language adaptor specific to a parallel programming paradigm implemented on a processor.

Overcoming residual interference in mental set switching: Neural correlates and developmental trajectory

PubMed Central

Witt, Suzanne T.; Stevens, Michael C.

2012-01-01

Mental set switching is a key facet of executive control measured behaviorally through reaction time or accuracy (i.e., ‘switch costs’) when shifting among task types. One of several experimentally-dissociable influences on switch costs is ‘task set inertia’, conceptualized as the residual interference conferred when a previous stimulus-response tendency interferes with subsequent stimulus processing on a new task. Task set inertia is thought to represent the passive decay of the previous stimulus-response set from working memory, and its effects decrease with increased interstimulus interval. Closely spaced trials confer high task set inertia, while sparsely spaced trials confer low task set inertia. This functional magnetic resonance imaging (fMRI) study characterized, for the first time, two opposing brain systems engaged to resolve task set inertia: 1) a frontoparietal ‘cortical control’ network for overcoming high task set inertia interference and 2) a subcortical-motor network more active during trials with low task set inertia. These networks were distinct from brain regions showing general switching effects (i.e., switch > non-switch) and from other previously-characterized interference effects. Moreover, there were ongoing maturational effects throughout adolescence for the brain regions engaged to overcome high task set inertia not seen for generalized switching effects. These novel findings represent a new avenue of exploration of cognitive set switching neural function. PMID:22584223

Increased task-uncorrelated muscle activity in childhood dystonia.

PubMed

Lunardini, Francesca; Maggioni, Serena; Casellato, Claudia; Bertucco, Matteo; Pedrocchi, Alessandra L G; Sanger, Terence D

2015-06-12

Even if movement abnormalities in dystonia are obvious on observation-based examinations, objective measures to characterize dystonia and to gain insights into its pathophysiology are still strongly needed. We hypothesize that motor abnormalities in childhood dystonia are partially due to the inability to suppress involuntary variable muscle activity irrelevant to the achievement of the desired motor task, resulting in the superposition of unwanted motion components on the desired movement. However, it is difficult to separate and quantify appropriate and inappropriate motor signals combined in the same muscle, especially during movement. We devise an innovative and practical method to objectively measure movement abnormalities during the performance of a continuous figure-eight writing task in 7 children with dystonia and 9 age-matched healthy controls. During the execution of a continuous writing task, muscle contractions should occur at frequencies that match the frequencies of the writing outcome. We compare the power spectra of kinematic trajectories and electromyographic signals of 8 upper limb muscles to separate muscle activity with the same frequency content of the figure-eight movement (task-correlated) from activity occurring at frequencies extraneous to the task (task-uncorrelated). Children with dystonia present a greater magnitude of task-uncorrelated muscle components. The motor performance achieved by children with dystonia is characterized by an overall lower quality, with high spatial and temporal variability and an altered trade-off between speed and accuracy. Findings are consistent with the hypothesis that, in childhood dystonia, the ability to appropriately suppress variable and uncorrelated elements of movement is impaired. Here we present a proof-of-concept of a promising tool to characterize the phenomenology of movement disorders and to inform the design of neurorehabilitation therapies.

Joint Task Force on Undergraduate Physics Programs

NASA Astrophysics Data System (ADS)

This session will focus on the guidelines and recommendations being developed by the APS/AAPT Joint Task Force on Undergraduate Physics Programs. J-TUPP is studying how undergraduate physics programs might better prepare physics majors for diverse careers. The guidelines and recommendations will focus on curricular content, flexible tracks, pedagogical methods, research experiences and internships, the development of professional skills, and enhanced advising and mentoring for all physics majors.

A Proposal for Program Assessment at Kean College of New Jersey. Final Report of the Presidential Task Force on Student Learning and Development.

ERIC Educational Resources Information Center

Kean Coll. of New Jersey, Union.

In response to a request from its president, an institutional task force at Kean College of New Jersey studied approaches to program assessment used at other colleges, identified the measurement approaches being used at Kean College, and made policy recommendations for implementing an assessment program at the college. A major finding was that no…

The Fourth R: Reasoning. Proceedings of the Conference of the University/Urban Schools National Task Force (4th, San Juan, Puerto Rico, November 11 & 12, 1982).

ERIC Educational Resources Information Center

Bossone, Richard M., Ed.

This booklet contains proceedings of the Fourth Conference of the University/Urban Schools National Task Force. The conference was held to present information about four programs designed to help high school students to sharpen their reasoning skills. Criteria for program development state that: (1) the program can be taught to teachers in a…

The Grounded Expertise Components Approach in the Novel Area of Cryptic Crossword Solving.

PubMed

Friedlander, Kathryn J; Fine, Philip A

2016-01-01

This paper presents a relatively unexplored area of expertise research which focuses on the solving of British-style cryptic crossword puzzles. Unlike its American "straight-definition" counterparts, which are primarily semantically-cued retrieval tasks, the British cryptic crossword is an exercise in code-cracking detection work. Solvers learn to ignore the superficial "surface reading" of the clue, which is phrased to be deliberately misleading, and look instead for a grammatical set of coded instructions which, if executed precisely, will lead to the correct (and only) answer. Sample clues are set out to illustrate the task requirements and demands. Hypothesized aptitudes for the field might include high fluid intelligence, skill at quasi-algebraic puzzles, pattern matching, visuospatial manipulation, divergent thinking and breaking frame abilities. These skills are additional to the crystallized knowledge and word-retrieval demands which are also a feature of American crossword puzzles. The authors present results from an exploratory survey intended to identify the characteristics of the cryptic crossword solving population, and outline the impact of these results on the direction of their subsequent research. Survey results were strongly supportive of a number of hypothesized skill-sets and guided the selection of appropriate test content and research paradigms which formed the basis of an extensive research program to be reported elsewhere. The paper concludes by arguing the case for a more grounded approach to expertise studies, termed the Grounded Expertise Components Approach. In this, the design and scope of the empirical program flows from a detailed and objectively-based characterization of the research population at the very onset of the program.

76 FR 66763 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-510...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... of Technical Specifications Task Force Traveler TSTF-510, Revision 2, ``Revision to Steam Generator..., Revision 2, ``Revision to Steam Generator [(SG)] Program Inspection Frequencies and Tube Sample Selection..., ``Steam Generator (SG) Program,'' Specification 5.6.7, ``Steam Generator Tube Inspection Report,'' and the...

Task force on compliance and enforcement. Final report. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-03-01

Recommendations for measures to strengthen the FEA enforcement program in the area of petroleum price regulation are presented. Results of task force efforts are presented in report and recommendations sections concerned with pending cases, compliance program organization, enforcement powers, compliance strategy, and audit staffing and techniques. (JRD)

Competence Assessment Integrating Reflective Practice in a Professional Psychology Program

ERIC Educational Resources Information Center

Lewis, Deborah; Virden, Tom; Hutchings, Philinda Smith; Bhargava, Ruchi

2011-01-01

The Midwestern University Clinical Psychology Program--Glendale Campus (MWU) created a Comprehensive Assessment Method in Psychology (CAMP) comprised of 35 different "tasks" of authentic work products representing a variety of assessment techniques based on pedagogical theory. Each task assesses one or more components of one of the…

48 CFR 516.506 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... items, when the contract authorizes FAS and other activities to issue delivery or task orders, insert the clause at 552.216-72, Placement of Orders. If only FAS will issue delivery or task orders, insert... Program items and in other FAS Program solicitations. [75 FR 41096, July 15, 2010] ...

48 CFR 516.506 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... items, when the contract authorizes FAS and other activities to issue delivery or task orders, insert the clause at 552.216-72, Placement of Orders. If only FAS will issue delivery or task orders, insert... Program items and in other FAS Program solicitations. [75 FR 41096, July 15, 2010] ...

48 CFR 516.506 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... items, when the contract authorizes FAS and other activities to issue delivery or task orders, insert the clause at 552.216-72, Placement of Orders. If only FAS will issue delivery or task orders, insert... Program items and in other FAS Program solicitations. [75 FR 41096, July 15, 2010] ...

48 CFR 516.506 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... items, when the contract authorizes FAS and other activities to issue delivery or task orders, insert the clause at 552.216-72, Placement of Orders. If only FAS will issue delivery or task orders, insert... Program items and in other FAS Program solicitations. [75 FR 41096, July 15, 2010] ...

48 CFR 516.506 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... items, when the contract authorizes FAS and other activities to issue delivery or task orders, insert the clause at 552.216-72, Placement of Orders. If only FAS will issue delivery or task orders, insert... Program items and in other FAS Program solicitations. [75 FR 41096, July 15, 2010] ...

Defining Hepatocellular Carcinoma Subtypes and Treatment Responses in Patient-Derived Tumorgrafts

DTIC Science & Technology

2017-10-01

Our team will use human- mouse PDX models to uncover novel biology and establish a platform to study experimental therapeutics. 1. KEYWORDS: HCC...if early vs. advanced HCCs have distinct cell-intrinsic biology in PDX engraftment assays Major Task 1: Expand and characterize PDX models derived...have distinct cell-intrinsic biology in PDX engraftment assays Major Task 1: Expand and characterize PDX models derived from surgical and biopsy

Highly Efficient Flexible Hybrid Photovoltaic Cells Based on Low-Band-Gap Conjugated Polymers Sensitized by Nanoparticle-Grafted Carbon

DTIC Science & Technology

2010-09-01

modeling, synthesis , and characterization of several series functional and processable electro-active conjugated polymers with evolving frontier...tasks as a basic obligation of this award: Task #1. Low Band Gap Polymers The awardee (Professor Sun’s group at NSU) shall design, synthesis , and...design, modeling, synthesis , and characterizations of several series functional and processable electro-active conjugated polymers with evolving

NASA's Hall Thruster Program 2002

NASA Technical Reports Server (NTRS)

Jankovsky, Robert S.; Jacobson, David T.; Pinero, Luis R.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2002-01-01

The NASA Hall thruster program currently supports a number of tasks related to high power thruster development for a number of customers including the Energetics Program (formerly called the Space-based Program), the Space Solar Power Program, and the In-space Propulsion Program. In program year 2002, two tasks were central to the NASA Hall thruster program: 1) the development of a laboratory Hall thruster capable of providing high thrust at high power-, and 2) investigations into operation of Hall thrusters at high specific impulse. In addition to these two primary thruster development activities, there are a number of other on-going activities supported by the NASA Hall thruster program. These additional activities are related to issues such as high-power power processor architecture, thruster lifetime, and spacecraft integration.

Does a multicomponent exercise program improve dual-task performance in amnestic mild cognitive impairment? A randomized controlled trial.

PubMed

Makizako, Hyuma; Doi, Takehiko; Shimada, Hiroyuki; Yoshida, Daisuke; Tsutsumimoto, Kota; Uemura, Kazuki; Suzuki, Takao

2012-12-01

There has been much interest in exercise interventions as a primary behavioral prevention strategy against cognitive decline. The aim of this study was to evaluate the effect of a multicomponent exercise program on physical and dual-task performances in community-dwelling older adults with amnestic mild cognitive impairment (aMCI). Fifty older adults (23 women) with aMCI (mean age, 76 years) were randomized to an intervention (n=25) or a control group (n=25). The intervention group received a multicomponent exercise program for 90 minutes/day, 2 days/week, or 40 times over six months. The multicomponent exercises included aerobic exercise, muscle strength training and postural balance retraining, which was conducted under multi-task conditions to stimulate attention and memory. Participants in the control group attended two health promotion education classes within six months. Physical and dual-task performances were measured before randomization and after six months. Dual-task performances using reaction times with balance and cognitive demands were measured. The improvement effects on dual-task performances with both balance and cognitive demands were not statistically significant: reaction time with balance demand F1,45=3.3, p=0.07, and cognitive demand F1,45=2.6, p=0.12. However, there was a significant group-by-time interaction on maximal walking speed, which decreased significantly in the control group (F1,45=5.9, p=0.02). This six-month multicomponent exercise program improved maximal walking speed in older adults with aMCI; however, it did not improve dual-task performances assessed by reaction times.

77 FR 16256 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species (ANS) Task Force. The ANS Task Force's purpose is to develop and implement a program for U.S. waters to prevent introduction...

7 CFR 1900.6 - Chair, Loan Resolution Task Force.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Chair, Loan Resolution Task Force. 1900.6 Section... AGRICULTURE PROGRAM REGULATIONS GENERAL Delegations of Authority § 1900.6 Chair, Loan Resolution Task Force. The Chair, Loan Resolution Task Force is delegated the following authorities, to be exercised until...

Horticulture III, IV, and V. Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task analysis guide is intended to help teachers and administrators develop instructional materials and implement competency-based education in the horticulture program. Section 1 contains a validated task inventory for horticulture III, IV, and V. For each task, applicable information pertaining to performance and enabling objectives,…

User-friendly program for multitask analysis

NASA Astrophysics Data System (ADS)

Caporali, Sergio A.; Akladios, Magdy; Becker, Paul E.

2000-10-01

Research on lifting activities has led to the design of several useful tools for evaluating tasks that involve lifting and material handling. The National Institute for Occupational Safety and Health (NIOSH) has developed a single task lifting equation. This formula has been frequently used as a guide in the field of ergonomics and material handling. While being much more complicated, the multi-task formula will provide a more realistic analysis for the evaluation of lifting and material handling jobs. A user friendly tool has been developed to assist professionals in the field of ergonomics in analyzing multitask types of material handling jobs. The program allows for up to 10 different tasks to be evaluated. The program requires a basic understanding of the NIOSH lifting guidelines and the six multipliers that are involved in the analysis of each single task. These multipliers are: Horizontal Distance Multiplier (HM), Vertical Distance Multiplier (VM), Vertical Displacement Multiplier (DM), Frequency of lifting Multiplier (FM), Coupling Multiplier (CM), and the Asymmetry Multiplier (AM). Once a given job is analyzed, a researched list of recommendations is provided to the user in an attempt to reduce the potential risk factors that are associated with each task.

Hispanic Youth--Dropout Prevention. Report of the Task Force on the Participation of Hispanic Students in Vocational Education Programs = La Joventud Hispana. Reporte del Grupo Especial. La Investigacion de la Participacion de los Estudiantes Hispanos en la Educacion Relativa a la Vocacion.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

An Idaho task force of Hispanic Americans, industry representatives, and education leaders studied the reasons Hispanic students were not enrolling in and completing vocational education programs. The task force sponsored a series of community meetings to identify reasons and solutions. Approximately 40-60 parents, students, and other interested…

Ozone measurement systems improvements studies

NASA Technical Reports Server (NTRS)

Thomas, R. W.; Guard, K.; Holland, A. C.; Spurling, J. F.

1974-01-01

Results are summarized of an initial study of techniques for measuring atmospheric ozone, carried out as the first phase of a program to improve ozone measurement techniques. The study concentrated on two measurement systems, the electro chemical cell (ECC) ozonesonde and the Dobson ozone spectrophotometer, and consisted of two tasks. The first task consisted of error modeling and system error analysis of the two measurement systems. Under the second task a Monte-Carlo model of the Dobson ozone measurement technique was developed and programmed for computer operation.

Nano-Zirconium Tungstate Reinforced Liquid Crystalline Thermosetting Composites with Near Zero Thermal Expansion

DTIC Science & Technology

2015-06-25

5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Washington State University, Pullman...1234. 5c. PROGRAM ELEMENT NUMBER. Enter all program element numbers as they appear in the report, e.g. 61101A. 5d. PROJECT NUMBER. Enter all... project numbers as they appear in the report, e.g. 1F665702D1257; ILIR. 5e. TASK NUMBER. Enter all task numbers as they appear in the report

Within- and between-task consistency in hand use as a means of characterizing hand preferences in captive chimpanzees (Pan troglodytes).

PubMed

Hopkins, William D; Gardner, Molly; Mingle, Morgan; Reamer, Lisa; Schapiro, Steven J

2013-11-01

There remain considerable questions regarding the evidence for population-level handedness in nonhuman primates when compared with humans. One challenge in comparing human and nonhuman primate handedness involves the procedures used to characterize individual handedness. Studies of human handedness use consistency in hand use within and between tasks as a basis for hand preference classification. In contrast, studies of handedness in nonhuman primates use statistical criteria for classifying handedness. In this study, we examined within- and between-task consistency in hand use as a means of characterizing individual handedness in a sample of 300 captive chimpanzees (Pan troglodytes). Chimpanzees showed population-level right-handedness for both within- and between-tasks consistency, though the proportion of right-handed chimpanzees was lower than what has typically been reported for humans. We further found that there were small, but significant, associations in hand use between measures. There were no significant sex or colony effects on the distribution of handedness. The results are discussed in the context of theories on the evolution of handedness in nonhuman primates.

Within- and Between-Task Consistency in Hand Use as a Means of Characterizing Hand Preferences in Captive Chimpanzees (Pan troglodytes)

PubMed Central

Hopkins, William D.; Gardner, Molly; Mingle, Morgan; Reamer, Lisa; Schapiro, Steven J.

2013-01-01

There remain considerable questions regarding the evidence for population-level handedness in nonhuman primates when compared with humans. One challenge in comparing human and nonhuman primate handedness involves the procedures used to characterize individual handedness. Studies of human handedness use consistency in hand use within and between tasks as a basis for hand preference classification. In contrast, studies of handedness in nonhuman primates use statistical criteria for classifying handedness. In this study, we examined within- and between-task consistency in hand use as a means of characterizing individual handedness in a sample of 300 captive chimpanzees (Pan troglodytes). Chimpanzees showed population-level right-handedness for both within- and between-tasks consistency, though the proportion of right-handed chimpanzees was lower than what has typically been reported for humans. We further found that there were small, but significant, associations in hand use between measures. There were no significant sex or colony effects on the distribution of handedness. The results are discussed in the context of theories on the evolution of handedness in nonhuman primates. PMID:23356440

MEMS-based platforms for mechanical manipulation and characterization of cells

NASA Astrophysics Data System (ADS)

Pan, Peng; Wang, Wenhui; Ru, Changhai; Sun, Yu; Liu, Xinyu

2017-12-01

Mechanical manipulation and characterization of single cells are important experimental techniques in biological and medical research. Because of the microscale sizes and highly fragile structures of cells, conventional cell manipulation and characterization techniques are not accurate and/or efficient enough or even cannot meet the more and more demanding needs in different types of cell-based studies. To this end, novel microelectromechanical systems (MEMS)-based technologies have been developed to improve the accuracy, efficiency, and consistency of various cell manipulation and characterization tasks, and enable new types of cell research. This article summarizes existing MEMS-based platforms developed for cell mechanical manipulation and characterization, highlights their specific design considerations making them suitable for their designated tasks, and discuss their advantages and limitations. In closing, an outlook into future trends is also provided.

Composite Overwrapped Pressure Vessels: Database Extension Task 3.0 and Impact Damage Effects Control Task 8.0

NASA Technical Reports Server (NTRS)

Beeson, Harold D.; Davis, Dennis D.; Ross, William L., Sr.; Tapphorn, Ralph M.

2002-01-01

This document represents efforts accomplished at the NASA Johnson Space Center White Sands Test Facility (WSTF) in support of the Enhanced Technology for Composite Overwrapped Pressure Vessels (COPV) Program, a joint research and technology effort among the U.S. Air Force, NASA, and the Aerospace Corporation. WSTF performed testing for several facets of the program. Testing that contributed to the Task 3.0 COPV database extension objective included baseline structural strength, failure mode and safe-life, impact damage tolerance, sustained load/impact effect, and materials compatibility. WSTF was also responsible for establishing impact protection and control requirements under Task 8.0 of the program. This included developing a methodology for establishing an impact control plan. Seven test reports detail the work done at WSTF. As such, this document contributes to the database of information regarding COPV behavior that will ensure performance benefits and safety are maintained throughout vessel service life.

Task-Related Modulations of BOLD Low-Frequency Fluctuations within the Default Mode Network

PubMed Central

Tommasin, Silvia; Mascali, Daniele; Gili, Tommaso; Assan, Ibrahim Eid; Moraschi, Marta; Fratini, Michela; Wise, Richard G.; Macaluso, Emiliano; Mangia, Silvia; Giove, Federico

2017-01-01

Spontaneous low-frequency Blood-Oxygenation Level-Dependent (BOLD) signals acquired during resting state are characterized by spatial patterns of synchronous fluctuations, ultimately leading to the identification of robust brain networks. The resting-state brain networks, including the Default Mode Network (DMN), are demonstrated to persist during sustained task execution, but the exact features of task-related changes of network properties are still not well characterized. In this work we sought to examine in a group of 20 healthy volunteers (age 33 ± 6 years, 8 F/12 M) the relationship between changes of spectral and spatiotemporal features of one prominent resting-state network, namely the DMN, during the continuous execution of a working memory n-back task. We found that task execution impacted on both functional connectivity and amplitude of BOLD fluctuations within large parts of the DMN, but these changes correlated between each other only in a small area of the posterior cingulate. We conclude that combined analysis of multiple parameters related to connectivity, and their changes during the transition from resting state to continuous task execution, can contribute to a better understanding of how brain networks rearrange themselves in response to a task. PMID:28845420

Space shuttle guidance, navigation, and control design equations. Volume 3: Guidance

NASA Technical Reports Server (NTRS)

1973-01-01

Space shuttle guidance, navigation, and control design equations are presented. The space-shuttle mission includes three relatively distinct guidance phases which are discussed; atmospheric boost, which is characterized by an adaptive guidance law; extra-atmospheric activities; and re-entry activities, where aerodynamic surfaces are the principal effectors. Guidance tasks include pre-maneuver targeting and powered flight guidance, where powered flight is defined to include the application of aerodynamic forces as well as thruster forces. A flow chart which follows guidance activities throughout the mission from the pre-launch phase through touchdown is presented. The main guidance programs and subroutines used in each phase of a typical rendezvous mission are listed. Detailed software requirements are also presented.

COMP Superscalar, an interoperable programming framework

NASA Astrophysics Data System (ADS)

Badia, Rosa M.; Conejero, Javier; Diaz, Carlos; Ejarque, Jorge; Lezzi, Daniele; Lordan, Francesc; Ramon-Cortes, Cristian; Sirvent, Raul

2015-12-01

COMPSs is a programming framework that aims to facilitate the parallelization of existing applications written in Java, C/C++ and Python scripts. For that purpose, it offers a simple programming model based on sequential development in which the user is mainly responsible for (i) identifying the functions to be executed as asynchronous parallel tasks and (ii) annotating them with annotations or standard Python decorators. A runtime system is in charge of exploiting the inherent concurrency of the code, automatically detecting and enforcing the data dependencies between tasks and spawning these tasks to the available resources, which can be nodes in a cluster, clouds or grids. In cloud environments, COMPSs provides scalability and elasticity features allowing the dynamic provision of resources.

Probing Kill Mechanisms and Tuning Energetic Biocides

DTIC Science & Technology

2018-02-01

Satcher, J. H., Jr.; Poco, J. F. Nanostructured Energetic Materials Using Sol−Gel Methodologies . J. Non -Cryst. Solids 2001, 285, 338−345. (16) Seo, H...customary unit. 2" " Abstract This project focuses on developing a methodology to accurately assess the time- temperature-kill relationships for spores...Task 1: Develop experimental protocol Task 2: Characterize Time-Temperature killing relationship Task 3: Determine kill mechanisms Task 4: Expose

A Model and Algorithms For a Software Evolution Control System

DTIC Science & Technology

1993-12-01

dynamic scheduling approaches can be found in [67). Task scheduling can also be characterized as preemptive and nonpreemptive . A task is preemptive ...is NP-hard for both the preemptive and nonpreemptive cases [671 [84). Scheduling nonpreemptive tasks with arbitrary ready times is NP-hard in both...the preemptive and nonpreemptive cases [671 [841. Scheduling nonpreemptive tasks with arbitrary ready times is NP-hard in both multiprocessor and

Automotive Stirling Engine Development Program

NASA Technical Reports Server (NTRS)

1978-01-01

The third quarter (April-June, 1978) effort of the Ford/DOE Automotive Stirling Engine Development Program is reported, specifically Task 1 of that effort, which is Fuel Economy Assessment. At the end of this quarter the total fourth generation fuel economy projection was 26.12 MPG (gasoline) with a confidence level of 44%. This represents an improvement of 66.4% over the baseline M-H fuel economy of 15.7 MPG. The confidence level for the original 20.6 MPG goal has been increased from 53% to 57%. Engine 3X17 has accumulated a total of 213 hours of variable speed running. A summary of the individual sub-tasks of Task 1 are given. The sub-tasks are grouped into two categories: Category 1 consists of those sub-tasks which are directly related to fuel economy and Category 2 consists of those sub-tasks which are not directly related to fuel economy but are an integral part of the Task 1 effort.

Training attentional control in older adults

PubMed Central

MacKay-Brandt, Anna

2013-01-01

Recent research has demonstrated benefits for older adults from training attentional control using a variable priority strategy, but the construct validity of the training task and the degree to which benefits of training transfer to other contexts are unclear. The goal of this study was to characterize baseline performance on the training task in a sample of 105 healthy older adults and to test for transfer of training in a subset (n = 21). Training gains after 5 days and extent of transfer was compared to another subset (n = 20) that served as a control group. Baseline performance on the training task was characterized by a two-factor model of working memory and processing speed. Processing speed correlated with the training task. Training gains in speed and accuracy were reliable and robust (ps <.001, η2 = .57 to .90). Transfer to an analogous task was observed (ps <.05, η2 = .10 to .17). The beneficial effect of training did not translate to improved performance on related measures of processing speed. This study highlights the robust effect of training and transfer to a similar context using a variable priority training task. Although processing speed is an important aspect of the training task, training benefit is either related to an untested aspect of the training task or transfer of training is limited to the training context. PMID:21728889

Measuring Success in Your Fuels Program: From the Report Card to Valuable Learning

Treesearch

Paula Nasiatka; David Christenson

2006-01-01

How can a unit learn in everyday fuels programs and from program reviews? How can a unit move from living in the “report card” culture to discovering more effective ways to improve what it knows and how it learns? Six specific tasks are critical to organizational learning according to David A. Garvin of Harvard Business School. By engaging in these tasks a unit can...

[Progress of the ATM Crew}

NASA Technical Reports Server (NTRS)

Krabill, W. (Technical Monitor)

2001-01-01

Contract NAS5-99094 was initiated on December 1, 1998. The subject contract contains 5 tasks covering specific activities in support of 3 major sensor programs, each with a separate NASA Principal Investigator (PI). Accordingly, the bimonthly narrative is organized such that each of the programs are discussed separately with individual task activities presented within each of the programs. Acronyms are used throughout the report to keep the writing succinct. An attached glossary contains definitions for these acronyms.

A Program Based on Task-Based Teaching Approach to Develop Creative Thinking Teaching Skills for Female Science Teachers in Kingdom of Saudi Arabia (KSA)

ERIC Educational Resources Information Center

Ibrahim, Manal Hassan Mohammed Bin

2015-01-01

This study aimed at developing creative thinking teaching skills for female science teachers in Kingdom of Saudi Arabia (KSA) through designing a program based on task-based teaching approach. The problem of the study was specified as the weakness of creative thinking teaching skills for science teachers in KSA and the need for programs based on…

Advanced transportation system studies technical area 3: Alternate propulsion subsystem concepts, volume 3

NASA Technical Reports Server (NTRS)

Levak, Daniel

1993-01-01

The objective of this contract was to provide definition of alternate propulsion systems for both earth-to-orbit (ETO) and in-space vehicles (upper stages and space transfer vehicles). For such propulsion systems, technical data to describe performance, weight, dimensions, etc. was provided along with programmatic information such as cost, schedule, needed facilities, etc. Advanced technology and advanced development needs were determined and provided. This volume separately presents the various program cost estimates that were generated under three tasks: the F-1A Restart Task, the J-2S Restart Task, and the SSME Upper Stage Use Task. The conclusions, technical results, and the program cost estimates are described in more detail in Volume 1 - Executive Summary and in individual Final Task Reports.

Characterization of task-free and task-performance brain states via functional connectome patterns.

PubMed

Zhang, Xin; Guo, Lei; Li, Xiang; Zhang, Tuo; Zhu, Dajiang; Li, Kaiming; Chen, Hanbo; Lv, Jinglei; Jin, Changfeng; Zhao, Qun; Li, Lingjiang; Liu, Tianming

2013-12-01

Both resting state fMRI (R-fMRI) and task-based fMRI (T-fMRI) have been widely used to study the functional activities of the human brain during task-free and task-performance periods, respectively. However, due to the difficulty in strictly controlling the participating subject's mental status and their cognitive behaviors during R-fMRI/T-fMRI scans, it has been challenging to ascertain whether or not an R-fMRI/T-fMRI scan truly reflects the participant's functional brain states during task-free/task-performance periods. This paper presents a novel computational approach to characterizing and differentiating the brain's functional status into task-free or task-performance states, by which the functional brain activities can be effectively understood and differentiated. Briefly, the brain's functional state is represented by a whole-brain quasi-stable connectome pattern (WQCP) of R-fMRI or T-fMRI data based on 358 consistent cortical landmarks across individuals, and then an effective sparse representation method was applied to learn the atomic connectome patterns (ACPs) of both task-free and task-performance states. Experimental results demonstrated that the learned ACPs for R-fMRI and T-fMRI datasets are substantially different, as expected. A certain portion of ACPs from R-fMRI and T-fMRI data were overlapped, suggesting some subjects with overlapping ACPs were not in the expected task-free/task-performance brain states. Besides, potential outliers in the T-fMRI dataset were further investigated via functional activation detections in different groups, and our results revealed unexpected task-performances of some subjects. This work offers novel insights into the functional architectures of the brain. Copyright © 2013 Elsevier B.V. All rights reserved.

Characterization of Task-free and Task-performance Brain States via Functional Connectome Patterns

PubMed Central

Zhang, Xin; Guo, Lei; Li, Xiang; Zhang, Tuo; Zhu, Dajiang; Li, Kaiming; Chen, Hanbo; Lv, Jinglei; Jin, Changfeng; Zhao, Qun; Li, Lingjiang; Liu, Tianming

2014-01-01

Both resting state fMRI (R-fMRI) and task-based fMRI (T-fMRI) have been widely used to study the functional activities of the human brain during task-free and task-performance periods, respectively. However, due to the difficulty in strictly controlling the participating subject's mental status and their cognitive behaviors during R-fMRI/T-fMRI scans, it has been challenging to ascertain whether or not an R-fMRI/T-fMRI scan truly reflects the participant's functional brain states during task-free/task-performance periods. This paper presents a novel computational approach to characterizing and differentiating the brain's functional status into task-free or task-performance states, by which the functional brain activities can be effectively understood and differentiated. Briefly, the brain's functional state is represented by a whole-brain quasi-stable connectome pattern (WQCP) of R-fMRI or T-fMRI data based on 358 consistent cortical landmarks across individuals, and then an effective sparse representation method was applied to learn the atomic connectome patterns (ACP) of both task-free and task-performance states. Experimental results demonstrated that the learned ACPs for R-fMRI and T-fMRI datasets are substantially different, as expected. A certain portion of ACPs from R-fMRI and T-fMRI data were overlapped, suggesting some subjects with overlapping ACPs were not in the expected task-free/task-performance brain states. Besides, potential outliers in the T-fMRI dataset were further investigated via functional activation detections in different groups, and our results revealed unexpected task-performances of some subjects. This work offers novel insights into the functional architectures of the brain. PMID:23938590

Combined analysis of job and task benzene air exposures among workers at four US refinery operations

PubMed Central

Shin, Jennifer (Mi); Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2016-01-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers’ exposures to benzene over the past 30 years. PMID:26862134

Combined analysis of job and task benzene air exposures among workers at four US refinery operations.

PubMed

Burns, Amanda; Shin, Jennifer Mi; Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2017-03-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers' exposures to benzene over the past 30 years.

CRIB; the mineral resources data bank of the U.S. Geological Survey

USGS Publications Warehouse

Calkins, James Alfred; Kays, Olaf; Keefer, Eleanor K.

1973-01-01

The recently established Computerized Resources Information Bank (CRIB) of the U.S. Geological Survey is expected to play an increasingly important role in the study of United States' mineral resources. CRIB provides a rapid means for organizing and summarizing information on mineral resources and for displaying the results. CRIB consists of a set of variable-length records containing the basic information needed to characterize one or more mineral commodities, a mineral deposit, or several related deposits. The information consists of text, numeric data, and codes. Some topics covered are: name, location, commodity information, geology, production, reserves, potential resources, and references. The data are processed by the GIPSY program, which performs all the processing tasks needed to build, operate, and maintain the CRIB file. The sophisticated retrieval program allows the user to make highly selective searches of the files for words, parts of words, phrases, numeric data, word ranges, numeric ranges, and others, and to interrelate variables by logic statements to any degree of refinement desired. Three print options are available, or the retrieved data can be passed to another program for further processing.

A graphical, rule based robotic interface system

NASA Technical Reports Server (NTRS)

Mckee, James W.; Wolfsberger, John

1988-01-01

The ability of a human to take control of a robotic system is essential in any use of robots in space in order to handle unforeseen changes in the robot's work environment or scheduled tasks. But in cases in which the work environment is known, a human controlling a robot's every move by remote control is both time consuming and frustrating. A system is needed in which the user can give the robotic system commands to perform tasks but need not tell the system how. To be useful, this system should be able to plan and perform the tasks faster than a telerobotic system. The interface between the user and the robot system must be natural and meaningful to the user. A high level user interface program under development at the University of Alabama, Huntsville, is described. A graphical interface is proposed in which the user selects objects to be manipulated by selecting representations of the object on projections of a 3-D model of the work environment. The user may move in the work environment by changing the viewpoint of the projections. The interface uses a rule based program to transform user selection of items on a graphics display of the robot's work environment into commands for the robot. The program first determines if the desired task is possible given the abilities of the robot and any constraints on the object. If the task is possible, the program determines what movements the robot needs to make to perform the task. The movements are transformed into commands for the robot. The information defining the robot, the work environment, and how objects may be moved is stored in a set of data bases accessible to the program and displayable to the user.

Orientation to Health Occupations: Year One Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Idaho state curriculum document for the first year of the secondary educations health occupations program contains the following introductory material: (1) a description of the program design; (2) a list of first-year areas of competency; (3) a foundation and job-readiness skills task list; and (4) a core curriculum task list. The curriculum…

Potential Uses of Occupational Analysis Data By Air Force Management Engineering Teams.

ERIC Educational Resources Information Center

McFarland, Barry P.

Both the occupational analysis program and the management engineering program are primarily concerned with task level descriptions of time spent to perform tasks required in the Air Force, the first being personnel specialty code oriented and the second being work center oriented. However two separate and independent techniques have been developed…

The Blake Interaction Model for Task Force Program Development in Vocational Education.

ERIC Educational Resources Information Center

Blake, Duane L.

The Blake Interaction Model presented in this manual is designed to eliminate three problems which usually confront a task force charged with the responsibility of program development in a conference setting: (1) how to involve simultaneously several work groups in the productive capacity developing solutions for several separate problems; (2) how…

Drafting and Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This document provides lists of tasks, performance objectives, and enabling objectives for 1,800 hours of postsecondary instruction or 900 hours of secondary instruction in the drafting and design technology program. Following a list of tasks and an explanation of the program, the bulk of the document consists of 25 modules, each of which is a…

Targeted On-Demand Team Performance App Development

DTIC Science & Technology

2018-02-01

ACCOMPLISHMENTS: Major Goals Task Description Status 1 Project Management Administration, oversight and management of all program tasks, expenditures...reporting charts, financial and project management protocols. Create, complete, and submit all documentation for program office and designated... project provided? All subjects participated in simulated emergency medicine events that included concurrent management of three patients with

State of the Art Student Support Services in an IEP Learning Center

ERIC Educational Resources Information Center

Hanson, Jessica; Maxwell, Jeffrey; Mulder, Monika

2015-01-01

Intensive English language programs (IEPs) at American universities have the task of recruiting, retaining, and preparing international students for mainstream classes. In order to achieve these tasks, many programs have explored using supplemental instruction (SI) in the form of learning centers (LCs) to support their students. In this study, we…

Analyzing Workforce Education. Monograph.

ERIC Educational Resources Information Center

Texas Community & Technical Coll. Workforce Education Consortium.

This monograph examines the issue of task analysis as used in workplace literacy programs, debating the need for it and how to perform it in a rapidly changing environment. Based on experiences of community colleges in Texas, the report analyzes ways that task analysis can be done and how to implement work force education programs more quickly.…

Environmental Educational Youth Action Task Program

ERIC Educational Resources Information Center

Ab Rahman, Nik Norulaini Nik; Omar, Fatehah Mohd; Kalia, Noorliza; Hasmi, Mohammad

2008-01-01

An educational environmental youth camp was held comprising of fifty one 16-year old secondary students and facilitated by volunteers from the university and Friends of the Earth, a non profit organization in Penang. A weekend camp on youth action task program was held at an isolated beach packed with activities that were structured towards…

The Primary Program: Report from the Task Force on Improving Kentucky Schools.

ERIC Educational Resources Information Center

Prichard Committee for Academic Excellence, Lexington, KY.

Because the primary years are the point where specific changes are required in teaching practice and school organization, a task force examined Kentucky's primary program through school visits, interviews, expert testimony, and research. The last three years have shown marked improvement in student performance in the basics (reading, writing, and…

Enhancing Problem-Solving Capabilities Using Object-Oriented Programming Language

ERIC Educational Resources Information Center

Unuakhalu, Mike F.

2009-01-01

This study integrated object-oriented programming instruction with transfer training activities in everyday tasks, which might provide a mechanism that can be used for efficient problem solving. Specifically, a Visual BASIC embedded with everyday tasks group was compared to another group exposed to Visual BASIC instruction only. Subjects were 40…

Report to the State Department of Education Task Force on Migrant Education.

ERIC Educational Resources Information Center

Rollason, Wendell N.

The report presents Redlands Christian Migrant Association's (RCMA's) position on Florida's Migrant Education Program, the program changes sought by RCMA, and background and back-up materials. The packet of materials includes brief discussions of the background and reactivation of the Task Force on Migrant Education; State Board of Education…

Defining College-Level Skills. Report of the Task Force on Definition of College-Level Skills.

ERIC Educational Resources Information Center

Minnesota Higher Education Coordinating Board, St. Paul.

Recommendations concerning the reading, writing, and mathematics skills that are needed by students entering degree programs in Minnesota postsecondary institutions are offered by a Minnesota Higher Education Coordinating Board task force. In addition to describing reading skills that students need for most college degree programs, conditions…

BASIC, Logo, and Pilot: A Comparison of Three Computer Languages.

ERIC Educational Resources Information Center

Maddux, Cleborne D.; Cummings, Rhoda E.

1985-01-01

Following a brief history of Logo, BASIC, and Pilot programing languages, common educational programing tasks (input from keyboard, evaluation of keyboard input, and computation) are presented in each language to illustrate how each can be used to perform the same tasks and to demonstrate each language's strengths and weaknesses. (MBR)

Performance Tasks: An Assessment Technique Used at TOSTP.

ERIC Educational Resources Information Center

Galway, Janis; Whittington, Andrew

1984-01-01

Discusses evolution of task performance assessment technique of the Toronto Office Skills Training Project (TOSTP), a 45-week training program for women from Vietnam, Laos, and Cambodia. Training in office skills, language, and life skills is uniquely integrated in a program designed to enable the women to overcome the obstacles of language…

Tracer Methods for Characterizing Fracture Creation in Engineered Geothermal Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Peter; Harris, Joel

2014-05-08

The aim of this proposal is to develop, through novel high-temperature-tracing approaches, three technologies for characterizing fracture creation within Engineered Geothermal Systems (EGS). The objective of a first task is to identify, develop and demonstrate adsorbing tracers for characterizing interwell reservoir-rock surface areas and fracture spacing. The objective of a second task is to develop and demonstrate a methodology for measuring fracture surface areas adjacent to single wells. The objective of a third task is to design, fabricate and test an instrument that makes use of tracers for measuring fluid flow between newly created fractures and wellbores. In one methodmore » of deployment, it will be used to identify qualitatively which fractures were activated during a hydraulic stimulation experiment. In a second method of deployment, it will serve to measure quantitatively the rate of fluid flowing from one or more activated fracture during a production test following a hydraulic stimulation.« less

A Novel Method for Characterizing Spacesuit Mobility Through Metabolic Cost

NASA Technical Reports Server (NTRS)

McFarland, Shane M.; Norcross, Jason R.

2014-01-01

Historically, spacesuit mobility has been characterized by directly measuring both range of motion and joint torque of individual anatomic joints. The work detailed herein aims to improve on this method, which is often prone to uncertainly, lack of repeatability, and a general lack of applicability to real-world functional tasks. Specifically, the goal of this work is to characterize suited mobility performance by directly measuring the metabolic performance of the occupant. Pilot testing was conducted in 2013, employing three subjects performing a range of functional tasks in two different suits prototypes, the Mark III and Z-1. Cursory analysis of the results shows the approach has merit, with consistent performance trends toward one suit over the other. Forward work includes the need to look at more subjects, a refined task set, and another suit in a different mass/mobility regime to validate the approach.

Characterizing “fibrofog”: Subjective appraisal, objective performance, and task-related brain activity during a working memory task

PubMed Central

Walitt, Brian; Čeko, Marta; Khatiwada, Manish; Gracely, John L.; Rayhan, Rakib; VanMeter, John W.; Gracely, Richard H.

2016-01-01

The subjective experience of cognitive dysfunction (“fibrofog”) is common in fibromyalgia. This study investigated the relation between subjective appraisal of cognitive function, objective cognitive task performance, and brain activity during a cognitive task using functional magnetic resonance imaging (fMRI). Sixteen fibromyalgia patients and 13 healthy pain-free controls completed a battery of questionnaires, including the Multiple Ability Self-Report Questionnaire (MASQ), a measure of self-perceived cognitive difficulties. Participants were evaluated for working memory performance using a modified N-back working memory task while undergoing Blood Oxygen Level Dependent (BOLD) fMRI measurements. Fibromyalgia patients and controls did not differ in working memory performance. Subjective appraisal of cognitive function was associated with better performance (accuracy) on the working memory task in healthy controls but not in fibromyalgia patients. In fibromyalgia patients, increased perceived cognitive difficulty was positively correlated with the severity of their symptoms. BOLD response during the working memory task did not differ between the groups. BOLD response correlated with task accuracy in control subjects but not in fibromyalgia patients. Increased subjective cognitive impairment correlated with decreased BOLD response in both groups but in different anatomic regions. In conclusion, “fibrofog” appears to be better characterized by subjective rather than objective impairment. Neurologic correlates of this subjective experience of impairment might be separate from those involved in the performance of cognitive tasks. PMID:26955513

Characterizing "fibrofog": Subjective appraisal, objective performance, and task-related brain activity during a working memory task.

PubMed

Walitt, Brian; Čeko, Marta; Khatiwada, Manish; Gracely, John L; Rayhan, Rakib; VanMeter, John W; Gracely, Richard H

2016-01-01

The subjective experience of cognitive dysfunction ("fibrofog") is common in fibromyalgia. This study investigated the relation between subjective appraisal of cognitive function, objective cognitive task performance, and brain activity during a cognitive task using functional magnetic resonance imaging (fMRI). Sixteen fibromyalgia patients and 13 healthy pain-free controls completed a battery of questionnaires, including the Multiple Ability Self-Report Questionnaire (MASQ), a measure of self-perceived cognitive difficulties. Participants were evaluated for working memory performance using a modified N-back working memory task while undergoing Blood Oxygen Level Dependent (BOLD) fMRI measurements. Fibromyalgia patients and controls did not differ in working memory performance. Subjective appraisal of cognitive function was associated with better performance (accuracy) on the working memory task in healthy controls but not in fibromyalgia patients. In fibromyalgia patients, increased perceived cognitive difficulty was positively correlated with the severity of their symptoms. BOLD response during the working memory task did not differ between the groups. BOLD response correlated with task accuracy in control subjects but not in fibromyalgia patients. Increased subjective cognitive impairment correlated with decreased BOLD response in both groups but in different anatomic regions. In conclusion, "fibrofog" appears to be better characterized by subjective rather than objective impairment. Neurologic correlates of this subjective experience of impairment might be separate from those involved in the performance of cognitive tasks.

78 FR 78493 - National Rural Transportation Assistance Program: Solicitation for Proposals

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... 5. Task 5: RTAP Rural Resource Center 6. Task 6: Peer-to-Peer Networking 7. Task 7: Research and... for networking with State RTAP managers while establishing communication for information dissemination... Community Edition (DNN) version 05.06.02 (144). 6. Task 6: Peer-to-Peer Networking The recipient will...

Agricultural Production: Task Analysis for Livestock Production. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task analysis guide is intended to help teachers and administrators develop instructional materials and implement competency-based education in the agricultural production program. Section 1 contains a validated task inventory for the livestock production portion of agricultural production IV and V. Tasks are divided into six duty areas:…

Solar Energy Task Force Report: Technical Training Guidelines.

ERIC Educational Resources Information Center

O'Connor, Kevin

This task force report offers guidelines and information for the development of vocational education programs oriented to the commercial application of solar energy in water and space heating. After Section I introduces the Solar Energy Task Force and its activities, Section II outlines the task force's objectives and raises several issues and…

Application of a Curriculum Hierarchy Evaluation (CHE) Model to Sequentially Arranged Tasks.

ERIC Educational Resources Information Center

O'Malley, J. Michael

A curriculum hierarchy evaluation (CHE) model was developed by combining a transfer paradigm with an aptitude-treatment-task interaction (ATTI) paradigm. Positive transfer was predicted between sequentially arranged tasks, and a programed or nonprogramed treatment was predicted to interact with aptitude and with tasks. Eighteen four and five…

Qualitative task analysis to enhance sports characterization: a surfing case study.

PubMed

Moreira, Miguel; Peixoto, César

2014-09-29

The aim of this study was to develop a Matrix of Analysis for Sports Tasks (MAST), regardless of the sports activity, based on practice classification and task analysis. Being this a qualitative research our main question was: in assessing sports' structure is it possible to make the characterization of any discipline through context and individuals' behaviours? The sample was within a surf discipline in a competition flowing having 5 of the top 16 Portuguese surfers training together. Based on a qualitative method, studying the surf as the main activity was an interpretative study case. The MAST was applied in four phases: taxonomy; tasks and context description; task analysis; teaching and performance strategies. Its application allowed the activities' characterization through the observation, surfer's opinions and bibliographical support. The triangulation of the data was used as an information data treatment. The elements were classified by the challenges proposed to the practitioners and the taxonomy was constituted by the sport activities, group, modality and discipline. Surf is a discipline of surfing which is a sliding sport modality, therefore, a nature sport. In the context description, we had the wave's components and constraints and the surfboards' qualities. Through task analysis we obtained a taxonomy of surf manoeuvres. The structural and functional analysis allowed finding solutions for learning of surf techniques with trampoline and skateboards because these fit in sliding sports. MAST makes possible the development of strategies that benefit teaching and performance intervention.

Qualitative Task Analysis to Enhance Sports Characterization: A Surfing Case Study

PubMed Central

Moreira, Miguel; Peixoto, César

2014-01-01

The aim of this study was to develop a Matrix of Analysis for Sports Tasks (MAST), regardless of the sports activity, based on practice classification and task analysis. Being this a qualitative research our main question was: in assessing sports’ structure is it possible to make the characterization of any discipline through context and individuals’ behaviours? The sample was within a surf discipline in a competition flowing having 5 of the top 16 Portuguese surfers training together. Based on a qualitative method, studying the surf as the main activity was an interpretative study case. The MAST was applied in four phases: taxonomy; tasks and context description; task analysis; teaching and performance strategies. Its application allowed the activities’ characterization through the observation, surfer’s opinions and bibliographical support. The triangulation of the data was used as an information data treatment. The elements were classified by the challenges proposed to the practitioners and the taxonomy was constituted by the sport activities, group, modality and discipline. Surf is a discipline of surfing which is a sliding sport modality, therefore, a nature sport. In the context description, we had the wave’s components and constraints and the surfboards’ qualities. Through task analysis we obtained a taxonomy of surf manoeuvres. The structural and functional analysis allowed finding solutions for learning of surf techniques with trampoline and skateboards because these fit in sliding sports. MAST makes possible the development of strategies that benefit teaching and performance intervention. PMID:25414757

Five task clusters that enable efficient and effective digitization of biological collections

PubMed Central

Nelson, Gil; Paul, Deborah; Riccardi, Gregory; Mast, Austin R.

2012-01-01

Abstract This paper describes and illustrates five major clusters of related tasks (herein referred to as task clusters) that are common to efficient and effective practices in the digitization of biological specimen data and media. Examples of these clusters come from the observation of diverse digitization processes. The staff of iDigBio (The U.S. National Science Foundation’s National Resource for Advancing Digitization of Biological Collections) visited active biological and paleontological collections digitization programs for the purpose of documenting and assessing current digitization practices and tools. These observations identified five task clusters that comprise the digitization process leading up to data publication: (1) pre-digitization curation and staging, (2) specimen image capture, (3) specimen image processing, (4) electronic data capture, and (5) georeferencing locality descriptions. While not all institutions are completing each of these task clusters for each specimen, these clusters describe a composite picture of digitization of biological and paleontological specimens across the programs that were observed. We describe these clusters, three workflow patterns that dominate the implemention of these clusters, and offer a set of workflow recommendations for digitization programs. PMID:22859876

TRU Waste Management Program. Cost/schedule optimization analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detamore, J.A.; Raudenbush, M.H.; Wolaver, R.W.

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office Rockwell International (JIO/RI) during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, taskmore » guidance development, task monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short-term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. Systems models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less

Mobilizable RDF/d-RDF burning program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niemann, K.; Campbell, J.

1982-03-01

The Mobilizable RDF/d-RDF Burning Program was conceived to promote the utilization of refuse-derived fuels (RDF) as a supplement to existing fossil fuel sources in industrial-sized boilers. The program explores the design, development, and eventual construction of densified-RDF (d-RDF) for use in boiler combustion testing as a supplement to stoker coal or wood wastes. The equipment would be mounted on trailers and assembled and operated at preselected sites throughout the country where approximately 750 tons of RDF would be produced and test burned in a local boiler. The equipment, to include a transportable RDF boiler metering and feed system, would thenmore » be moved and operated at two to three test sites annually. The program is intended to encourage the construction of permanent resource recovery facilities by involving local waste handling groups in operating the equipment and producing fuel, and potential local fuel users in testing the fuel in their boilers. The Mobilizable Program was developed from two separate tasks. The first task developed the concept behind the program and defined its operational and organizational structure. The second task, a follow-up to the first, was intended principally to finalize test locations, develop equipment designs and specifications, and formalize a management program. This report summarizes the principal findings of both tasks. It identifies the criteria used to identify test locations, outlines the program's management structure, presents design and performance specifications for both the fuel production equipment and boiler fuel feed systems, and provides a detailed evaluation of the parameters involved in burning RDF in industrial-sized boilers. Final conclusions and recommendations identify problem areas encountered in the program, and discuss possible future directions for such a program.« less

Rational drug therapy education in clinical phase carried out by task-based learning

PubMed Central

Bilge, S. Sırrı; Akyüz, Bahar; Ağrı, Arzu Erdal; Özlem, Mıdık

2017-01-01

Objectives: Irrational drug use results in drug interactions, treatment noncompliance, and drug resistance. Rational pharmacotherapy education is being implemented in many faculties of medicine. Our aim is to introduce rational pharmacotherapy education by clinicians and to evaluate task-based rational drug therapy education in the clinical context. Methods: The Kirkpatrick's evaluation model was used for the evaluation of the program. The participants evaluated the program in terms of constituents of the program, utilization, and contribution to learning. Voluntary participants responded to the evaluation forms after the educational program. Data are evaluated using both quantitative and qualitative tools. SPSS (version 21) used for quantitative data for determining mean and standard deviation values. Descriptive qualitative analysis approach is used for the analysis of open-ended questions. Results: It was revealed that the program and its components have been favorable. A total 95.9% of the students consider the education to be beneficial. Simulated patients practice and personal drug choice/problem-based learning sessions were appreciated by the students in particular. 93.9% of the students stated that all students of medicine should undergo this educational program. Among the five presentations contained in the program, “The Principles of Prescribing” received the highest points (9 ± 1.00) from participating students in general evaluation of the educational program. Conclusion: This study was carried out to improve task-based rational drug therapy education. According to feedback from the students concerning content, method, resource, assessment, and program design; some important changes, especially in number of facilitators and indications, are made in rational pharmacotherapy education in clinical task-based learning program. PMID:28458432

Characterization of Cleaning and Disinfecting Tasks and Product Use Among Hospital Occupations

PubMed Central

Saito, Rena; Virji, M. Abbas; Henneberger, Paul K.; Humann, Michael J.; LeBouf, Ryan F.; Stanton, Marcia L.; Liang, Xiaoming; Stefaniak, Aleksandr B.

2016-01-01

Background Healthcare workers have an elevated prevalence of asthma and related symptoms associated with the use of cleaning/disinfecting products. The objective of this study was to identify and characterize cleaning/disinfecting tasks and products used among hospital occupations. Methods Workers from 14 occupations at five hospitals were monitored for 216 shifts, and work tasks and products used were recorded at five-minute intervals. The major chemical constituents of each product were identified from safety data sheets. Results Cleaning and disinfecting tasks were performed with a high frequency at least once per shift in many occupations. Medical equipment preparers, housekeepers, floor strippers/waxers, and endoscopy technicians spent on average 108–177 min/shift performing cleaning/disinfecting tasks. Many occupations used products containing amines and quaternary ammonium compounds for > 100 min/shift. Conclusions This analysis demonstrates that many occupations besides housekeeping incur exposures to cleaning/disinfecting products, albeit for different durations and using products containing different chemicals. PMID:25351791

Marshall Space Flight Center solid waste characterization and recycling improvement study

NASA Technical Reports Server (NTRS)

Eley, Michael H.; Crews, Lavonne; Johnston, Ben; Lee, David; Colebaugh, James

1995-01-01

The MSFC Facilities Office, which is responsible for disposing of all waste generated by MSFC, issued a delivery order to the University of Alabama in Huntsville (UAH) to characterize current MSFC waste streams and to evaluate their existing recycling program. The purpose of the study was to define the nature, quantity, and types of waste produced and to generate ideas for improving the present recycling program. Specifically, the following tasks were to be performed: Identify various surplus and waste materials--as identified by the Contracting Officer's Technical Representative (COTR)--by source, location, and type; Analyze MSFC's current methods for handling, storage, transport, and disposition of waste and surplussed materials; Determine the composition of various surplus and waste materials as to type and quantities from various sources and locations; Analyze different methods for the disposition of various surplus and waste materials, including quality, quantity, preparation, transport cost, and value; Study possible alternatives to current methods of handling, storage, transport, and disposition of surplus and waste materials to improve the quality and quantities recycled or sold and to reduce and minimize the quantities of surplus and waste material currently being disposed of or stored; Provide recommendations for source and centralized segregation and aggregation of materials for recycling and/or disposition; and The analysis could include identification and laboratory level evaluation of methods and/or equipment, including capital costs, operating costs, maintenance requirements, life cycle and return on investment for systems to support the waste reduction program mission.

Programming and Technology for Accessibility in Geoscience

NASA Astrophysics Data System (ADS)

Sevre, E.; Lee, S.

2013-12-01

Many people, students and professors alike, shy away from learning to program because it is often believed to be something scary or unattainable. However, integration of programming into geoscience education can be a valuable tool for increasing the accessibility of content for all who are interested. It is my goal to dispel these myths and convince people that: 1) Students with disabilities can use programming to increase their role in the classroom, 2) Everyone can learn to write programs to simplify daily tasks, 3) With a deep understanding of the task, anyone can write a program to do a complex task, 4) Technology can be combined with programming to create an inclusive environment for all students of geoscience, and 5) More advanced knowledge of programming and technology can lead geoscientists to create software to serve as assistive technology in the classroom. It is my goal to share my experiences using technology to enhance the classroom experience as a way of addressing the aforementioned issues. Through my experience, I have found that programming skills can be included and learned by all to enhance the content of courses without detracting from curriculum. I hope that, through this knowledge, geoscience courses can become more accessible for people with disabilities by including programming and technology to the benefit of all involved.

Advanced Launch System Multi-Path Redundant Avionics Architecture Analysis and Characterization

NASA Technical Reports Server (NTRS)

Baker, Robert L.

1993-01-01

The objective of the Multi-Path Redundant Avionics Suite (MPRAS) program is the development of a set of avionic architectural modules which will be applicable to the family of launch vehicles required to support the Advanced Launch System (ALS). To enable ALS cost/performance requirements to be met, the MPRAS must support autonomy, maintenance, and testability capabilities which exceed those present in conventional launch vehicles. The multi-path redundant or fault tolerance characteristics of the MPRAS are necessary to offset a reduction in avionics reliability due to the increased complexity needed to support these new cost reduction and performance capabilities and to meet avionics reliability requirements which will provide cost-effective reductions in overall ALS recurring costs. A complex, real-time distributed computing system is needed to meet the ALS avionics system requirements. General Dynamics, Boeing Aerospace, and C.S. Draper Laboratory have proposed system architectures as candidates for the ALS MPRAS. The purpose of this document is to report the results of independent performance and reliability characterization and assessment analyses of each proposed candidate architecture and qualitative assessments of testability, maintainability, and fault tolerance mechanisms. These independent analyses were conducted as part of the MPRAS Part 2 program and were carried under NASA Langley Research Contract NAS1-17964, Task Assignment 28.

Automation - Changes in cognitive demands and mental workload

NASA Technical Reports Server (NTRS)

Tsang, Pamela S.; Johnson, Walter W.

1987-01-01

The effect of partial automation on mental workloads in man/machine tasks is investigated experimentally. Subjective workload measures are obtained from six subjects after performance of a task battery comprising two manual (flight-path control, FC, and target acquisition, TA) tasks and one decisionmaking (engine failure, EF) task; the FC task was performed in both a fully manual (altitude and lateral control) mode and in a semiautomated mode (autmatic latitude control). The performance results and subjective evaluations are presented in graphs and characterized in detail. The automation is shown to improve objective performance and lower subjective workload significantly in the combined FC/TA task, but not in the FC task alone or in the FC/EF task.

Determination of the Underlying Task Scheduling Algorithm for an Ada Runtime System

DTIC Science & Technology

1989-12-01

was also curious as to how well I could model the test cases with Ada programs . In particular, I wanted to see whether I could model the equal arrival...parameter relationshis=s required to detect the execution of individual algorithms. These test cases were modeled using Ada programs . Then, the...results were analyzed to determine whether the Ada programs were capable of revealing the task scheduling algorithm used by the Ada run-time system. This

FY 1986 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office/RI during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, taskmore » monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. System models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less

Development and evaluation of a radar air traffic control research task.

DOT National Transportation Integrated Search

1965-12-01

A system is described in which various elements of the radar air traffic controller's task can be presented repeatedly, reliably, and concurrently to each of six experimental subjects seated at separate task consoles. Programming of display condition...

Regulative Loops, Step Loops and Task Loops

ERIC Educational Resources Information Center

VanLehn, Kurt

2016-01-01

This commentary suggests a generalization of the conception of the behavior of tutoring systems, which the target article characterized as having an outer loop that was executed once per task and an inner loop that was executed once per step of the task. A more general conception sees these two loops as instances of regulative loops, which…

Complex Span versus Updating Tasks of Working Memory: The Gap Is Not that Deep

ERIC Educational Resources Information Center

Schmiedek, Florian; Hildebrandt, Andrea; Lovden, Martin; Wilhelm, Oliver; Lindenberger, Ulman

2009-01-01

How to best measure working memory capacity is an issue of ongoing debate. Besides established complex span tasks, which combine short-term memory demands with generally unrelated secondary tasks, there exists a set of paradigms characterized by continuous and simultaneous updating of several items in working memory, such as the n-back, memory…

Enhanced surveillance program FY97 accomplishments. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauzy, A.; Laake, B.

1997-10-01

This annual report is one volume of the Enhanced Surveillance Program (ESP) FY97 Accomplishments. The complete accomplishments report consists of 11 volumes. Volume 1 includes an ESP overview and a summary of selected unclassified FY97 program highlights. Volume 1 specifically targets a general audience, reflecting about half of the tasks conducted in FY97 and emphasizing key program accomplishments and contributions. The remaining volumes of the accomplishments report are classified, organized by program focus area, and present in technical detail the progress achieved in each of the 104 FY97 program tasks. Focus areas are as follows: pits; high explosives; organics; dynamics;more » diagnostics; systems; secondaries; nonnuclear materials; nonnuclear components; and Surveillance Test Program upgrades.« less

TSAR User’s Manual: A Program for Assessing the Effects of Conventional and Chemical Attacks on Sortie Generation. Volume 1. Program Features, Logic, and Interactions

DTIC Science & Technology

1990-09-01

that work will be done at the point where Task 30000 is specified. The unscheduled on-equipment aircraft tasks are normally grouped together with the...probability events, TSAR groups together those tasks performed by the same work center or shop and selects at most one following each flighL Processing is...remainder capable only of assembling other kinds. Furthermore, the first group of personnel should be specified to be cross-trained to do the work of

Video segmentation and camera motion characterization using compressed data

NASA Astrophysics Data System (ADS)

Milanese, Ruggero; Deguillaume, Frederic; Jacot-Descombes, Alain

1997-10-01

We address the problem of automatically extracting visual indexes from videos, in order to provide sophisticated access methods to the contents of a video server. We focus on tow tasks, namely the decomposition of a video clip into uniform segments, and the characterization of each shot by camera motion parameters. For the first task we use a Bayesian classification approach to detecting scene cuts by analyzing motion vectors. For the second task a least- squares fitting procedure determines the pan/tilt/zoom camera parameters. In order to guarantee the highest processing speed, all techniques process and analyze directly MPEG-1 motion vectors, without need for video decompression. Experimental results are reported for a database of news video clips.

Task-Based Assessment of Students' Computational Thinking Skills Developed through Visual Programming or Tangible Coding Environments

ERIC Educational Resources Information Center

Djambong, Takam; Freiman, Viktor

2016-01-01

While today's schools in several countries, like Canada, are about to bring back programming to their curricula, a new conceptual angle, namely one of computational thinking, draws attention of researchers. In order to understand the articulation between computational thinking tasks in one side, student's targeted skills, and the types of problems…

Evaluating TBLT: The Case of a Task-Based Spanish Program

ERIC Educational Resources Information Center

González-Lloret, Marta; Nielson, Katharine B.

2015-01-01

The need for foreign language education in the US has increased in recent years, and teaching methods based on traditional textbooks are unlikely to meet the real-world needs of current learners. As a response, interest in Language for Specific Purposes programs has grown and so has Task-Based Language Teaching (TBLT) methodology. This article…

Learner Control versus Program Control in Interactive Videodisc Instruction: What Are the Effects in Procedural Learning?

ERIC Educational Resources Information Center

Shyu, Hsin-Yih; Brown, Scott W.

1992-01-01

Discussion of learner-controlled instruction focuses on a study of undergraduates that compared learner control with program control in interactive videodisc instruction for making an origami crane. Student performance, self-efficacy concerning the instructional task, time on task, and student attitudes toward the instruction are examined. (32…

Report of the Temporary Task Force on the Tuition Assistance Program.

ERIC Educational Resources Information Center

New York State Higher Education Services Corp., Albany.

This report contains recommendations for changes to New York's Tuition Assistance Program (TAP) to be considered during the 1997 legislative session. It outlines the principal options addressed by the task force, the historical context of the TAP, and the cost of meeting full tuition and non-tuition allowances through state and federal grants and…

A College Marketing Plan That's Working: Final Report. CASE Certification Program in Executive Management.

ERIC Educational Resources Information Center

Noll, Gayle

In response to a 3% decline in fall 1977 enrollments, Odessa College developed and implemented a comprehensive marketing program. After initial planning, a marketing task force and nine mini-task forces were created to deal with the topics of community economic markets, community cultural markets, student retention, student recruitment techniques,…

Identification and Development of Competency-Based Curriculum for Water and Wastewater Program.

ERIC Educational Resources Information Center

Kirkwood Community Coll., Cedar Rapids, IA.

A project was undertaken at Kirkwood Community College to develop a full-time and part-time competency based program to educate water and wastewater treatment plant operators. First, a survey was conducted to identify the job tasks performed by the operators, their frequency, importance, and necessity. A questionnaire listing 651 tasks divided…

Multiplexer/demultiplexer flexibility enhancement program

NASA Technical Reports Server (NTRS)

1978-01-01

This final report summarizes the accomplishments of the NASA/JSC MDM Flexibility Enhancement Program, Contract NAS9-15359 as carried out by Sperry Flight Systems from April through December 1977. Included are discussions of major statement of work tasks and the results, conclusions and recommended actions. All tasks called out in the amended SOW were carried out. Significant development tasks which were completed included the following: (1) Development, breadboard and test of a Pulse Output 28-volt Module. (2) Development and test of a 32-channel DC Analog Input (DCIN) Differential Module. (3) Development and test of a sequence memory module using an M2708 EPROM which can be programmed in the unit. (4) Development and test of a radiator top cover for a radiation-cooled Flexible MDM.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Accelerator Research Studies program at the University of Maryland, sponsored by the Department of Energy under grant number DE-FG05-91ER40642, is currently in the second year of a three-year funding cycle. The program consists of the following three tasks: TASK A, ``Study of Transport and Longitudinal Compression of Intense, High-Brightness Beams,`` (P.I., M. Reiser); TASK B, ``Study of Collective Ion Acceleration by Intense Electron Beams and Pseudospark Produced High Brightness Electron Beams,`` (Co-P.I.`s, W.W. Destler, M. Reiser, M.J. Rhee, and C.D. Striffler); TASK C, ``Study of a Gyroklystron High-Power Microwave Source for Linear Colliders,`` (Co-P.I.`s, V.L. Granatstein, W. Lawson, M.more » Reiser, and C.D. Striffler). In this report we document the progress that has been made during the past year for each of the three tasks.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Accelerator Research Studies program at the University of Maryland, sponsored by the Department of Energy under grant number DE-FG05-91ER40642, is currently in the second year of a three-year funding cycle. The program consists of the following three tasks: TASK A, Study of Transport and Longitudinal Compression of Intense, High-Brightness Beams,'' (P.I., M. Reiser); TASK B, Study of Collective Ion Acceleration by Intense Electron Beams and Pseudospark Produced High Brightness Electron Beams,'' (Co-P.I.'s, W.W. Destler, M. Reiser, M.J. Rhee, and C.D. Striffler); TASK C, Study of a Gyroklystron High-Power Microwave Source for Linear Colliders,'' (Co-P.I.'s, V.L. Granatstein, W. Lawson, M.more » Reiser, and C.D. Striffler). In this report we document the progress that has been made during the past year for each of the three tasks.« less

The Effects of a Treatment Package in Establishing Independent Academic Work Skills in Children with Autism.

ERIC Educational Resources Information Center

Pelios, Lillian V.; MacDuff, Gregory S.; Axelrod, Saul

2003-01-01

This study evaluated a treatment package to improve on-task academic skills by three children with autism. Program components included delayed reinforcement for on-task and on-schedule responding, fading of instructional prompts and instructor's presence, unpredictable supervision, and response cost for off-task responding. On-task and on-schedule…

Computational approaches to protein inference in shotgun proteomics

PubMed Central

2012-01-01

Shotgun proteomics has recently emerged as a powerful approach to characterizing proteomes in biological samples. Its overall objective is to identify the form and quantity of each protein in a high-throughput manner by coupling liquid chromatography with tandem mass spectrometry. As a consequence of its high throughput nature, shotgun proteomics faces challenges with respect to the analysis and interpretation of experimental data. Among such challenges, the identification of proteins present in a sample has been recognized as an important computational task. This task generally consists of (1) assigning experimental tandem mass spectra to peptides derived from a protein database, and (2) mapping assigned peptides to proteins and quantifying the confidence of identified proteins. Protein identification is fundamentally a statistical inference problem with a number of methods proposed to address its challenges. In this review we categorize current approaches into rule-based, combinatorial optimization and probabilistic inference techniques, and present them using integer programing and Bayesian inference frameworks. We also discuss the main challenges of protein identification and propose potential solutions with the goal of spurring innovative research in this area. PMID:23176300

NASA's Orbital Debris Optical and IR Ground-based Observing Program: Utilizing the MCAT, UKIRT, and Magellan Telescopes

NASA Astrophysics Data System (ADS)

Lederer, S.; Cowardin, H.; Buckalew, B.; Frith, J.; Hickson, P.; Pace, L.; Matney, M.; Anz-Meador, P.; Seitzer, P.; Stansbery, E.; Glesne, T.

2016-09-01

Characterizing debris in Earth-orbit has become increasingly important as the growing population of debris poses greater threats to active satellites each year. Currently, the Joint Space Operations is tracking > 23,000 objects ranging in size from 1-meter and larger in Geosychronous orbits (GEO) to 10-cm and larger at low-Earth orbits (LEO). Model estimates suggest that there are hundreds of thousands of pieces of spacecraft debris larger than 10 cm currently in orbit around the Earth. With such a small fraction of the total population being tracked, and new break-ups occurring from LEO to GEO, new assets, techniques, and approaches for characterizing this debris are needed. With this in mind, NASA's Orbital Debris Program Office has actively tasked a suite of telescopes around the world. In 2015, the newly-built 1.3m optical Meter Class Autonomous Telescope (MCAT) came on-line on Ascension Island and is now being commissioned. MCAT is designed to track Earth-orbiting objects above 200km, conduct surveys at GEO, and work with a co-located Raven-class commercial-off-the-shelf system, a 0.4m telescope with a field-of-view similar to MCAT's and research-grade instrumentation designed to complement MCAT. The 3.8m infrared UKIRT telescope on Mauna Kea, Hawaii has been heavily tasked to collect data on individual targets and in survey modes to study both the general GEO population and a break-up event. Data collected include photometry and spectroscopy in the near-Infrared (0.85 - 2.5μm) and the mid-infrared (8-16μm). Finally, the 6.5-m Baade Magellan telescope at Las Campanas Observatory in Chile was used to collect optical photometric survey data in October 2015 of two GEO Titan transtage breakups, focusing on locations of possible debris concentrations as indicated by the NASA standard break-up model.

Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion

NASA Technical Reports Server (NTRS)

Hanley, David; Carella, John

1999-01-01

This document, submitted by AlliedSignal Engines (AE), a division of AlliedSignal Aerospace Company, presents the program final report for the Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion in compliance with data requirements in the statement of work, Contract No. NAS3-97003. This document includes: 1 -Technical Summary: a) Component Design, b) Manufacturing Process Selection, c) Vendor Selection, and d) Testing Validation: 2-Program Conclusion and Perspective. Also, see the Appendix at the back of this report. This report covers the program accomplishments from December 1, 1996, to August 24, 1998. The Advanced High Temperature PMC's for Gas Turbine Engines Program Expansion was a one year long, five task technical effort aimed at designing, fabricating and testing a turbine engine component using NASA's high temperature resin system AMB-21. The fiber material chosen was graphite T650-35, 3K, 8HS with UC-309 sizing. The first four tasks included component design and manufacturing, process selection, vendor selection, component fabrication and validation testing. The final task involved monthly financial and technical reports.

Effectors as tools in disease resistance breeding against biotrophic, hemibiotrophic, and necrotrophic plant pathogens.

PubMed

Vleeshouwers, Vivianne G A A; Oliver, Richard P

2014-03-01

One of most important challenges in plant breeding is improving resistance to the plethora of pathogens that threaten our crops. The ever-growing world population, changing pathogen populations, and fungicide resistance issues have increased the urgency of this task. In addition to a vital inflow of novel resistance sources into breeding programs, the functional characterization and deployment of resistance also needs improvement. Therefore, plant breeders need to adopt new strategies and techniques. In modern resistance breeding, effectors are emerging as tools to accelerate and improve the identification, functional characterization, and deployment of resistance genes. Since genome-wide catalogues of effectors have become available for various pathogens, including biotrophs as well as necrotrophs, effector-assisted breeding has been shown to be successful for various crops. "Effectoromics" has contributed to classical resistance breeding as well as for genetically modified approaches. Here, we present an overview of how effector-assisted breeding and deployment is being exploited for various pathosystems.

Properties of Subsurface Soil Cores from Four Geologic Provinces Surrounding Mars Desert Research Station, Utah: Characterizing Analog Martian Soil in a Human Exploration Scenario

NASA Technical Reports Server (NTRS)

Stoker, C. R.; Clarke, J. D. A.; Direito, S.; Foing, B.

2011-01-01

The DOMEX program is a NASA-MMAMA funded project featuring simulations of human crews on Mars focused on science activities that involve collecting samples from the subsurface using both manual and robotic equipment methods and analyzing them in the field and post mission. A crew simulating a human mission to Mars performed activities focused on subsurface science for 2 weeks in November 2009 at Mars Desert Research Station near Hanksville, Utah --an important chemical and morphological Mars analog site. Activities performed included 1) survey of the area to identify geologic provinces, 2) obtaining soil and rock samples from each province and characterizing their mineralogy, chemistry, and biology; 3) site selection and reconnaissance for a future drilling mission; 4) deployment and testing of Mars Underground Mole, a percussive robotic soil sampling device; and 5) recording and analyzing how crew time was used to accomplish these tasks. This paper summarizes results from analysis of soil cores

The application of decision analysis to life support research and technology development

NASA Technical Reports Server (NTRS)

Ballin, Mark G.

1994-01-01

Applied research and technology development is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Decision making regarding which technologies to advance and what resources to devote to them is a challenging but essential task. In the application of life support technology to future manned space flight, new technology concepts typically are characterized by nonexistent data and rough approximations of technology performance, uncertain future flight program needs, and a complex, time-intensive process to develop technology to a flight-ready status. Decision analysis is a quantitative, logic-based discipline that imposes formalism and structure to complex problems. It also accounts for the limits of knowledge that may be available at the time a decision is needed. The utility of decision analysis to life support technology R & D was evaluated by applying it to two case studies. The methodology was found to provide insight that is not possible from more traditional analysis approaches.

A Checklist for the Development of Faculty Mentorship Programs

PubMed Central

Bottenberg, Michelle M.; Brozick, Anna H.; Currie, Jay D.; DiVall, Margarita V.; Haines, Stuart T.; Jolowsky, Christene; Koh-Knox, Cynthia P.; Leonard, Golda Anne; Phelps, Stephanie J.; Rao, Deepa; Webster, Andrew; Yablonski, Elizabeth

2014-01-01

Mentoring of junior faculty members continues to be a widespread need in academic pharmacy in both new programs and established schools. The American Association of Colleges of Pharmacy (AACP) Joint Council Task Force on Mentoring was charged with gathering information from member colleges and schools and from the literature to determine best practices that could be shared with the academy. The task force summarized their findings regarding the needs and responsibilities for mentors and protégés at all faculty levels; what mentoring pieces are in existence, which need improvement, and which need to be created; and how effective mentoring is defined and could be measured. Based on these findings, the task force developed several recommendations as well as the PAIRS Faculty Mentorship Checklist. Academic institutions can benefit from the checklist whether they are planning to implement a faculty mentorship program or are interested in modifying existing programs. PMID:24954938

Double degree master program: Optical Design

NASA Astrophysics Data System (ADS)

Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

2015-10-01

Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

Agricultural Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

The duties and tasks found in these task lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for agricultural occupations. The agricultural occupations are divided into three clusters. The clusters and occupations are: agricultural business and management cluster…

NASA Remediation Technology Collaboration Development Task, Overview and Project Summaries

NASA Technical Reports Server (NTRS)

Romeo, James G.

2014-01-01

An overview presentation of NASA's Remediation Technology Collaboration Development Task including the following project summaries: in situ groundwater monitor, in situ chemical oxidation, in situ bioremediation, horizontal multi-port well, and high resolution site characterization.

A relationship between eye movement patterns and performance in a precognitive tracking task

NASA Technical Reports Server (NTRS)

Repperger, D. W.; Hartzell, E. J.

1977-01-01

Eye movements made by various subjects in the performance of a precognitive tracking task are studied. The tracking task persented by an antiaircraft artillery (AAA) simulator has an input forcing function represented by a deterministic aircraft fly-by. The performance of subjects is ranked by two metrics. Good, mediocre, and poor trackers are selected for analysis based on performance during the difficult segment of the tracking task and over replications. Using phase planes to characterize both the eye movement patterns and the displayed error signal, a simple metric is developed to study these patterns. Two characterizations of eye movement strategies are defined and quantified. Using these two types of eye strategies, two conclusions are obtained about good, mediocre, and poor trackers. First, the eye tracker who used a fixed strategy will consistently perform better. Secondly, the best fixed strategy is defined as a Crosshair Fixator.

Translational Assessment of Reward and Motivational Deficits in Psychiatric Disorders.

PubMed

Der-Avakian, Andre; Barnes, Samuel A; Markou, Athina; Pizzagalli, Diego A

Deficits in reward and motivation are common symptoms characterizing several psychiatric and neurological disorders. Such deficits may include anhedonia, defined as loss of pleasure, as well as impairments in anticipatory pleasure, reward valuation, motivation/effort, and reward learning. This chapter describes recent advances in the development of behavioral tasks used to assess different aspects of reward processing in both humans and non-human animals. While earlier tasks were generally developed independently with limited cross-species correspondence, a newer generation of translational tasks has emerged that are theoretically and procedurally analogous across species and allow parallel testing, data analyses, and interpretation between human and rodent behaviors. Such enhanced conformity between cross-species tasks will facilitate investigation of the neurobiological mechanisms underlying discrete reward and motivated behaviors and is expected to improve our understanding and treatment of neuropsychiatric disorders characterized by reward and motivation deficits.

The Global Invasive Species Information Network: contributing to GEO Task BI-07-01b

NASA Astrophysics Data System (ADS)

Graham, J.; Morisette, J. T.; Simpson, A.

2009-12-01

Invasive alien species (IAS) threaten biodiversity and exert a tremendous cost on society for IAS prevention and eradication. They endanger natural ecosystem functioning and seriously impact biodiversity and agricultural production. The task definition for the GEO task BI-07-01b: Invasive Species Monitoring System is to characterize, monitor, and predict changes in the distribution of invasive species. This includes characterizing the current requirements and capacity for invasive species monitoring and developing strategies for implementing cross-search functionality among existing online invasive species information systems from around the globe. The Task is being coordinated by members of the Global Invasive Species Information Network (GISIN) and their partners. Information on GISIN and a prototype of the network is available at www.gisin.org. This talk will report on the current status of GISIN and review how researchers can either contribute to or utilize data from this network.

Translational Assessment of Reward and Motivational Deficits in Psychiatric Disorders

PubMed Central

Der-Avakian, Andre; Barnes, Samuel A.

2016-01-01

Deficits in reward and motivation are common symptoms characterizing several psychiatric and neurological disorders. Such deficits may include anhedonia, defined as loss of pleasure, as well as impairments in anticipatory pleasure, reward valuation, motivation/effort, and reward learning. This chapter describes recent advances in the development of behavioral tasks used to assess different aspects of reward processing in both humans and non-human animals. While earlier tasks were generally developed independently with limited cross-species correspondence, a newer generation of translational tasks has emerged that are theoretically and procedurally analogous across species and allow parallel testing, data analyses, and interpretation between human and rodent behaviors. Such enhanced conformity between cross-species tasks will facilitate investigation of the neurobiological mechanisms underlying discrete reward and motivated behaviors and is expected to improve our understanding and treatment of neuropsychiatric disorders characterized by reward and motivation deficits. PMID:26873017

Incremental learning of tasks from user demonstrations, past experiences, and vocal comments.

PubMed

Pardowitz, Michael; Knoop, Steffen; Dillmann, Ruediger; Zöllner, Raoul D

2007-04-01

Since many years the robotics community is envisioning robot assistants sharing the same environment with humans. It became obvious that they have to interact with humans and should adapt to individual user needs. Especially the high variety of tasks robot assistants will be facing requires a highly adaptive and user-friendly programming interface. One possible solution to this programming problem is the learning-by-demonstration paradigm, where the robot is supposed to observe the execution of a task, acquire task knowledge, and reproduce it. In this paper, a system to record, interpret, and reason over demonstrations of household tasks is presented. The focus is on the model-based representation of manipulation tasks, which serves as a basis for incremental reasoning over the acquired task knowledge. The aim of the reasoning is to condense and interconnect the data, resulting in more general task knowledge. A measure for the assessment of information content of task features is introduced. This measure for the relevance of certain features relies both on general background knowledge as well as task-specific knowledge gathered from the user demonstrations. Beside the autonomous information estimation of features, speech comments during the execution, pointing out the relevance of features are considered as well. The results of the incremental growth of the task knowledge when more task demonstrations become available and their fusion with relevance information gained from speech comments is demonstrated within the task of laying a table.

Structural Technology Evaluation Analysis Program (STEAP). Task Order 0029: Thermal Stability of Fatigue Life-Enhanced Structures

DTIC Science & Technology

2012-01-01

and c, we were able to obtain Figure 21: Intensity and Pressure Temporal Profiles Calculated from Pressure Model 0 20 40 60 80 100 0 2 4 6 8...August 2008 – 31 January 2012 4 . TITLE AND SUBTITLE STRUCTURAL TECHNOLOGY EVALUATION ANALYSIS PROGRAM (STEAP) Task Order 0029: Thermal...Stability of Fatigue Life-Enhanced Structures 5a. CONTRACT NUMBER FA8650-04-D-3446-0029 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62201F 6

Lunar-Ultraviolet Telescope Experiment (LUTE) integrated program plan

NASA Technical Reports Server (NTRS)

Smith, Janice F. (Compiler); Forrest, Larry

1993-01-01

A detailed Lunar Ultraviolet Telescope Experiment (LUTE) program plan representing major decisions and tasks leading to those decisions for program execution are presented. The purpose of this task was to develop an integrated plan of project activities for the LUTE project, and to display the plan as an integrated network that shows the project activities, all critical interfaces, and schedules. The integrated network will provide the project manager with a frame work for strategic planning and risk management throughout the life of the project.

Global Mobility Task: index for evaluating motor impairment and motor rehabilitation programs in Parkinson's disease patients.

PubMed

Peppe, A; Ranaldi, A; Chiavalon, C; Gasbarra, A; Collepardo, A; Romeo, R; Pasqualetti, P; Caltagirone, C

2007-09-01

In this study, the validity of a motor task, i.e., the Global Mobility Task (GMT), was assessed in a group of Parkinson's disease (PD) patients. Fifty-eight PD patients (mean age: 68.7 years) and 18 healthy subjects (mean age: 65.8 years) were enrolled in the study. The GMT measures the ability of an adult to roll over on the floor and stand up in five steps using two parameters: 'Time' and 'Score', i.e., the time needed and the ability to perform each step of the task. As the GMT has never been evaluated before, internal consistency and concurrent and discriminative validity were considered in assessing its characteristics in a group of PD patients at the beginning and at the end of a motor rehabilitation program. To determine whether the GMT could also quantify the extrapyramidal impairment, we compared data collected using this task with data obtained using clinical scales such as the Unified Parkinson's Disease Rating Scale III (UPDRS part III) and Hoehn & Yahr's score. Results showed that the GMT had good consistency and inter-rater reproducibility, was closely related to clinical scales and was able to detect the amelioration of extrapyramidal symptoms at the end of the motor rehabilitation program. we propose the GMT as a tool for measuring impaired mobility in PD patients and for evaluating the objective effects of motor rehabilitation programs.

Characterization of children's decision making: sensitivity to punishment frequency, not task complexity.

PubMed

Crone, Eveline A; Bunge, Silvia A; Latenstein, Heleen; van der Molen, Maurits W

2005-06-01

On a gambling task that models real-life decision making, children between ages 7 and 12 perform like patients with bilateral lesions of the ventromedial prefrontal cortex (VMPFC), opting for choices that yield high immediate gains in spite of higher future losses (Crone & Van der Molen, 2004). The current study set out to characterize developmental changes in decision making by varying task complexity and punishment frequency. Three age groups (7-9 years, 10-12 years, 13-15 years) performed two versions of a computerized variant of the original Iowa gambling task. Task complexity was manipulated by varying the number of choices participants could make. Punishment frequency was manipulated by varying the frequency of delayed punishment. Results showed a developmental increase in the sensitivity to future consequences, which was present only when the punishment was presented infrequently. These results could not be explained by differential sensitivity to task complexity, hypersensitivity to reward, or failure to switch response set after receiving punishment. There was a general pattern of boys outperforming girls by making more advantageous choices over the course of the task. In conclusion, 7-12-year-old children--like VMPFC patients--appear myopic about the future except when the potential for future punishment is high.

Task-related modulations of BOLD low-frequency fluctuations within the default mode network

NASA Astrophysics Data System (ADS)

Tommasin, Silvia; Mascali, Daniele; Gili, Tommaso; Eid Assan, Ibrahim; Moraschi, Marta; Fratini, Michela; Wise, Richard G.; Macaluso, Emiliano; Mangia, Silvia; Giove, Federico

2017-07-01

Spontaneous low-frequency Blood-Oxygenation Level-Dependent (BOLD) signals acquired during resting state are characterized by spatial patterns of synchronous fluctuations, ultimately leading to the identification of robust brain networks. The resting-state brain networks, including the Default Mode Network (DMN), are demonstrated to persist during sustained task execution, but the exact features of task-related changes of network properties are still not well characterized. In this work we sought to examine in a group of 20 healthy volunteers (age 33±6 years, 8F/12M) the relationship between changes of spectral and spatiotemporal features of one prominent resting-state network, namely the DMN, during the steady-state execution of a sustained working memory n-back task. We found that the steady state execution of such a task impacted on both functional connectivity and amplitude of BOLD fluctuations within large parts of the DMN, but these changes correlated between each other only in a small area of the posterior cingulate. We conclude that combined analysis of multiple parameters related to connectivity, and their changes during the transition from resting state to steady-state task execution, can contribute to a better understanding of how brain networks rearrange themselves in response of a task.

Sex differences in verbal working memory performance emerge at very high loads of common neuroimaging tasks.

PubMed

Reed, Jessica L; Gallagher, Natalie M; Sullivan, Marie; Callicott, Joseph H; Green, Adam E

2017-04-01

Working memory (WM) supports a broad range of intelligent cognition and has been the subject of rich cognitive and neural characterization. However, the highest ranges of WM have not been fully characterized, especially for verbal information. Tasks developed to test multiple levels of WM demand (load) currently predominate brain-based WM research. These tasks are typically used at loads that allow most healthy participants to perform well, which facilitates neuroimaging data collection. Critically, however, high performance at lower loads may obscure differences that emerge at higher loads. A key question not yet addressed at high loads concerns the effect of sex. Thoroughgoing investigation of high-load verbal WM is thus timely to test for potential hidden effects, and to provide behavioral context for effects of sex observed in WM-related brain structure and function. We tested 111 young adults, matched on genotype for the WM-associated COMT-Val 108/158 Met polymorphism, on three classic WM tasks using verbal information. Each task was tested at four WM loads, including higher loads than those used in previous studies of sex differences. All tasks loaded on a single factor, enabling comparison of verbal WM ability at a construct level. Results indicated sex effects at high loads across tasks and within each task, such that males had higher accuracy, even among groups that were matched for performance at lower loads. Published by Elsevier Inc.

Training attentional control in older adults.

PubMed

Mackay-Brandt, Anna

2011-07-01

Recent research has demonstrated benefits for older adults from training attentional control using a variable priority strategy, but the construct validity of the training task and the degree to which benefits of training transfer to other contexts are unclear. The goal of this study was to characterize baseline performance on the training task in a sample of 105 healthy older adults and to test for transfer of training in a subset (n = 21). Training gains after 5 days and extent of transfer was compared to another subset (n = 20) that served as a control group. Baseline performance on the training task was characterized by a two-factor model of working memory and processing speed. Processing speed correlated with the training task. Training gains in speed and accuracy were reliable and robust (ps <.001, η(2) = .57 to .90). Transfer to an analogous task was observed (ps <.05, η(2) = .10 to .17). The beneficial effect of training did not translate to improved performance on related measures of processing speed. This study highlights the robust effect of training and transfer to a similar context using a variable priority training task. Although processing speed is an important aspect of the training task, training benefit is either related to an untested aspect of the training task or transfer of training is limited to the training context.

Self-help memory training for healthy older adults in a residential care center: specific and transfer effects on performance and beliefs.

PubMed

Cavallini, Elena; Bottiroli, Sara; Capotosto, Emanuela; De Beni, Rossana; Pavan, Giorgio; Vecchi, Tomaso; Borella, Erika

2015-08-01

Cognitive flexibility has repeatedly been shown to improve after training programs in community-dwelling older adults, but few studies have focused on healthy older adults living in other settings. This study investigated the efficacy of self-help training for healthy older adults in a residential care center on memory tasks they practiced (associative and object list learning tasks) and any transfer to other tasks (grocery lists, face-name learning, figure-word pairing, word lists, and text learning). Transfer effects on everyday life (using a problem-solving task) and on participants' beliefs regarding their memory (efficacy and control) were also examined. With the aid of a manual, the training adopted a learner-oriented approach that directly encouraged learners to generalize strategic behavior to new tasks. The maintenance of any training benefits was assessed after 6 months. The study involved 34 residential care center residents (aged 70-99 years old) with no cognitive impairments who were randomly assigned to two programs: the experimental group followed the self-help training program, whereas the active control group was involved in general cognitive stimulation activities. Training benefits emerged in the trained group for the tasks that were practiced. Transfer effects were found in memory and everyday problem-solving tasks and on memory beliefs. The effects of training were generally maintained in both practiced and unpracticed memory tasks. These results demonstrate that learner-oriented self-help training enhances memory performance and memory beliefs, in the short term at least, even in residential care center residents. Copyright © 2014 John Wiley & Sons, Ltd.

Surgical simulation tasks challenge visual working memory and visual-spatial ability differently.

PubMed

Schlickum, Marcus; Hedman, Leif; Enochsson, Lars; Henningsohn, Lars; Kjellin, Ann; Felländer-Tsai, Li

2011-04-01

New strategies for selection and training of physicians are emerging. Previous studies have demonstrated a correlation between visual-spatial ability and visual working memory with surgical simulator performance. The aim of this study was to perform a detailed analysis on how these abilities are associated with metrics in simulator performance with different task content. The hypothesis is that the importance of visual-spatial ability and visual working memory varies with different task contents. Twenty-five medical students participated in the study that involved testing visual-spatial ability using the MRT-A test and visual working memory using the RoboMemo computer program. Subjects were also trained and tested for performance in three different surgical simulators. The scores from the psychometric tests and the performance metrics were then correlated using multivariate analysis. MRT-A score correlated significantly with the performance metrics Efficiency of screening (p = 0.006) and Total time (p = 0.01) in the GI Mentor II task and Total score (p = 0.02) in the MIST-VR simulator task. In the Uro Mentor task, both the MRT-A score and the visual working memory 3-D cube test score as presented in the RoboMemo program (p = 0.02) correlated with Total score (p = 0.004). In this study we have shown that some differences exist regarding the impact of visual abilities and task content on simulator performance. When designing future cognitive training programs and testing regimes, one might have to consider that the design must be adjusted in accordance with the specific surgical task to be trained in mind.

Identifying and Characterizing the Effects of Nutrition on Hippocampal Memory123

PubMed Central

Monti, Jim M.; Baym, Carol L.; Cohen, Neal J.

2014-01-01

In this review we provide evidence linking relational memory to the hippocampus, as well as examples of sensitive relational memory tasks that may help characterize the subtle effects of nutrition on learning and memory. Research into dietary effects on cognition is in its nascent stages, and many studies have cast a wide net with respect to areas of cognition to investigate. However, it may be that nutrition will have a disproportionate effect on particular cognitive domains. Thus, researchers interested in nutrition-cognition interactions may wish to apply a more targeted approach when selecting cognitive domains. We suggest that hippocampus-based relational memory may be extraordinarily sensitive to the effects of nutrition. The hippocampus shows unique plastic capabilities, making its structure and function responsive to an array of lifestyle factors and environmental conditions, including dietary intake. A major function of the hippocampus is relational memory, defined as learning and memory for the constituent elements and facts that comprise events. Here we identify several sensitive tests of relational memory that may be used to examine what may be subtle effects of nutrition on hippocampus and memory. We then turn to the literature on aerobic exercise and cognition to provide examples of translational research programs that have successfully applied this targeted approach centering on the hippocampus and sensitive relational memory tools. Finally, we discuss selected findings from animal and human research on nutrition and the hippocampus and advocate for the role of relational memory tasks in future research. PMID:24829486

49 CFR 192.805 - Qualification program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... include provisions to: (a) Identify covered tasks; (b) Ensure through evaluation that individuals performing covered tasks are qualified; (c) Allow individuals that are not qualified pursuant to this subpart to perform a covered task if directed and observed by an individual that is qualified; (d) Evaluate...

Industrial Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

The duties and tasks found in these task lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for industrial occupations. The industrial occupations are divided into eight clusters. The clusters and occupations are: construction cluster (bricklayer, carpenter, building maintenance…

77 FR 55218 - Homeland Security Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... childhood arrivals program. The HSAC will also receive a report from the Sustainability and Efficiency Task Force, review and discuss the task forces' report, and formulate recommendations for the Department. The.... HSAC conference call details and the Sustainability and Efficiency Task Force report will be provided...

78 FR 34313 - Funding Opportunity Title: Risk Management Education Partnerships Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

... Involvement H. Description of Agreement Award--Awardee Tasks I. Other Tasks Section III--Eligibility..., ornamental nursery, Christmas trees, turf grass sod, aquaculture (including ornamental fish), and industrial.... H. Description of Agreement Award--Awardee Tasks In conducting activities to achieve the purpose and...

Toward a unified system of accreditation for professional preparation in health education: final report of the National Task Force on Accreditation in Health Education.

PubMed

Allegrante, John P; Airhihenbuwa, Collins O; Auld, M Elaine; Birch, David A; Roe, Kathleen M; Smith, Becky J

2004-12-01

During the past 40 years, health education has taken significant steps toward improving quality assurance in professional preparation through individual certification and program approval and accreditation. Although the profession has begun to embrace individual certification, program accreditation in health education has been neither uniformly available nor universally accepted by institutions of higher education. To further strengthen professional preparation in health education, the Society for Public Health Education (SOPHE) and the American Association for Health Education (AAHE) established the National Task Force on Accreditation in Health Education in 2001. The 3-year Task Force was charged with developing a detailed plan for a coordinated accreditation system for undergraduate and graduate programs in health education. This article summarizes the Task Force's findings and recommendations, which have been approved by the SOPHE and AAHE boards, and, if implemented, promise to lay the foundation for the highest quality professional preparation and practice in health education.

Managing the space sciences

NASA Technical Reports Server (NTRS)

1995-01-01

In April 1994 the National Research Council received a request from NASA that the NRC's Space Studies Board provide guidance on questions relating to the management of NASA's programs in the space sciences. The issues raised in the request closely reflect questions posed in the agency's fiscal year 1994 Senate appropriations report. These questions included the following: Should all the NASA space science programs be gathered into a 'National Institute for Space Science'? What other organizational changes might be made to improve the coordination and oversight of NASA space science programs? What processes should be used for establishing interdisciplinary science priorities based on scientific merit and other criteria, while ensuring opportunities for newer fields and disciplines to emerge? And what steps could be taken to improve utilization of advanced technologies in future space scienc missions? This report details the findings of the Committee on the Future of Space Science (FOSS) and its three task groups: the Task Group on Alternative Organizations, Task Group on Research Prioritization, and the Task Group on Technology.

MSFC personnel management tasks: Recruitment and orientation of new employees

NASA Technical Reports Server (NTRS)

Brindley, T. A.

1980-01-01

In order to encourage highly motivated young students to learn about NASA and consider it for a career, a formal program is to be initiated whereby selected students can work on a voluntary basis at Marshall Space Flight Center (MSFC). The first task was to develop the working plan and procedures for this program, called Student Volunteer Service Program, in the writing of MSFC official guidelines, the Marshall Management Instruction (the MMI) which is a binding document that defines policy and establishes procedures and guidelines. Particular considerations written into the MMI after numerous consultations, interviews, and discussions about a satisfactory policy, include: arrangements to be made between the student, the school authorities, and concerned MSFC employees; management of the work assignments; and procedures for the student's welfare and safety. The second task was the development of a recruitment brochure for the attraction of new employees, especially scientists and engineers. The third task assigned was to develop a plan called Orientation of New Employees.

A Modification to the Computer Generated Acquisition Documents System (CGADS) for Microcomputer Use in a Program Office Environment.

DTIC Science & Technology

1985-09-01

FILL. MOVE ALPHA-RESPONSE TO RESPONSE. 221C-RUN-TASKS-EXIT. EXIT. 2220-DISPLAY-TASK-MENU. PERFORM 5000- OETER -NISC-TASK-VALS. MOVE 1 TO ANSWER-FILE-KEY...INDEX-FIELD-2 ELSE MOVE 4 TO ANSWER-FILE-KEY SUBTRACT 200 FROM INDEX-FIELD-2. 5000- OETER -MISC-TASK-VALS. IF AREA-NUMBER a ŕ" MOVE 1 TO TASK-FILE-REC-NUM

Advanced Video Activity Analytics (AVAA): Human Factors Evaluation

DTIC Science & Technology

2015-05-01

video, and 3) creating and saving annotations (Fig. 11). (The logging program was updated after the pilot to also capture search clicks.) Playing and... visual search task and the auditory task together and thus automatically focused on the visual task. Alternatively, the operator may have intentionally...affect performance on the primary task; however, in the current test there was no apparent effect on the operator’s performance in the visual search task

The Grounded Expertise Components Approach in the Novel Area of Cryptic Crossword Solving

PubMed Central

Friedlander, Kathryn J.; Fine, Philip A.

2016-01-01

This paper presents a relatively unexplored area of expertise research which focuses on the solving of British-style cryptic crossword puzzles. Unlike its American “straight-definition” counterparts, which are primarily semantically-cued retrieval tasks, the British cryptic crossword is an exercise in code-cracking detection work. Solvers learn to ignore the superficial “surface reading” of the clue, which is phrased to be deliberately misleading, and look instead for a grammatical set of coded instructions which, if executed precisely, will lead to the correct (and only) answer. Sample clues are set out to illustrate the task requirements and demands. Hypothesized aptitudes for the field might include high fluid intelligence, skill at quasi-algebraic puzzles, pattern matching, visuospatial manipulation, divergent thinking and breaking frame abilities. These skills are additional to the crystallized knowledge and word-retrieval demands which are also a feature of American crossword puzzles. The authors present results from an exploratory survey intended to identify the characteristics of the cryptic crossword solving population, and outline the impact of these results on the direction of their subsequent research. Survey results were strongly supportive of a number of hypothesized skill-sets and guided the selection of appropriate test content and research paradigms which formed the basis of an extensive research program to be reported elsewhere. The paper concludes by arguing the case for a more grounded approach to expertise studies, termed the Grounded Expertise Components Approach. In this, the design and scope of the empirical program flows from a detailed and objectively-based characterization of the research population at the very onset of the program. PMID:27199805

Evaluation of scheduling techniques for payload activity planning

NASA Technical Reports Server (NTRS)

Bullington, Stanley F.

1991-01-01

Two tasks related to payload activity planning and scheduling were performed. The first task involved making a comparison of space mission activity scheduling problems with production scheduling problems. The second task consisted of a statistical analysis of the output of runs of the Experiment Scheduling Program (ESP). Details of the work which was performed on these two tasks are presented.

Global Ground Motion Prediction Equations Program | Just another WordPress

Science.gov Websites

Motion Task 2: Compile and Critically Review GMPEs Task 3: Select or Derive a Global Set of GMPEs Task 6 : Design the Specifications to Compile a Global Database of Soil Classification Task 5: Build a Database of Update on PEER's Global GMPEs Project from recent workshop in Turkey Posted on June 11, 2012 During May

Digital ultrasonic signal processing: Primary ultrasonics task and transducer characterization use and detailed description

NASA Technical Reports Server (NTRS)

Hammond, P. L.

1979-01-01

This manual describes the use of the primary ultrasonics task (PUT) and the transducer characterization system (XC) for the collection, processing, and recording of data received from a pulse-echo ultrasonic system. Both PUT and XC include five primary functions common to many real-time data acquisition systems. Some of these functions are implemented using the same code in both systems. The solicitation and acceptance of operator control input is emphasized. Those operations not under user control are explained.

Technology Insertion-Engineering Services Process Characterization. Task Order No. 1. Book 1 of 3. Database Documentation Book. OO-ALC MANPGP (Overview Layouts)

DTIC Science & Technology

1989-12-15

Missile Systems Company 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER McDonnell Douglas Missile Systems...SEQUENCE NO. B008 MCDONNELL DOUGLAS McDonnefl Douglas Missile Systems Company St. Louis, Missouri 63166-0516 (314) 232-0232 91-02815 Distribution nt pm rt...Systems Company 7.1- 1 2. TASK ORDER NO. 1 PROCESS CHARACTERIZATION The brake assembly subunit is responsible for the assembly of brakes. Brakes enter

Wireless Channel Characterization in the Airport Surface Environment

NASA Technical Reports Server (NTRS)

Neville, Joshua T.

2004-01-01

Given the anticipated increase in air traffic in the coming years, modernization of the National Airspace System (NAS) is a necessity. Part of this modernization effort will include updating current communication, navigation, and surveillance (CNS) systems to deal with the increased traffic as well as developing advanced CNS technologies for the systems. An example of such technology is the integrated CNS (ICNS) network being developed by the Advanced CNS Architecture and Systems Technology (ACAST) group for use in the airport surface environment. The ICNS network would be used to convey voice/data between users in a secure and reliable manner. The current surface system only supports voice and does so through an obsolete physical infrastructure. The old system is vulnerable to outages and costly to maintain. The proposed ICNS network will include a wireless radio link. To ensure optimal performance, a thorough and accurate characterization of the channel across which the link would operate is necessary. The channel is the path the signal takes from the transmitter to the receiver and is prone to various forms of interference. Channel characterization involves a combination of analysis, simulation, and measurement. My work this summer was divided into four tasks. The first task required compiling and reviewing reference material that dealt with the characterization and modeling of aeronautical channels. The second task involved developing a systematic approach that could be used to group airports into classes, e.g. small airfields, medium airports, large open airports, large cluttered airports, etc. The third task consisted of implementing computer simulations of existing channel models. The fourth task entailed measuring possible interference sources in the airport surface environment via a spectrum analyzer.

Design strategies to improve patient motivation during robot-aided rehabilitation.

PubMed

Colombo, Roberto; Pisano, Fabrizio; Mazzone, Alessandra; Delconte, Carmen; Micera, Silvestro; Carrozza, M Chiara; Dario, Paolo; Minuco, Giuseppe

2007-02-19

Motivation is an important factor in rehabilitation and frequently used as a determinant of rehabilitation outcome. Several factors can influence patient motivation and so improve exercise adherence. This paper presents the design of two robot devices for use in the rehabilitation of upper limb movements, that can motivate patients during the execution of the assigned motor tasks by enhancing the gaming aspects of rehabilitation. In addition, a regular review of the obtained performance can reinforce in patients' minds the importance of exercising and encourage them to continue, so improving their motivation and consequently adherence to the program. In view of this, we also developed an evaluation metric that could characterize the rate of improvement and quantify the changes in the obtained performance. Two groups (G1, n = 8 and G2, n = 12) of patients with chronic stroke were enrolled in a 3-week rehabilitation program including standard physical therapy (45 min. daily) plus treatment by means of robot devices (40 min., twice daily) respectively for wrist (G1) and elbow-shoulder movements (G2). Both groups were evaluated by means of standard clinical assessment scales and the new robot measured evaluation metric. Patients' motivation was assessed in 9/12 G2 patients by means of the Intrinsic Motivation Inventory (IMI) questionnaire. Both groups reduced their motor deficit and showed a significant improvement in clinical scales and the robot measured parameters. The IMI assessed in G2 patients showed high scores for interest, usefulness and importance subscales and low values for tension and pain subscales. Thanks to the design features of the two robot devices the therapist could easily adapt training to the individual by selecting different difficulty levels of the motor task tailored to each patient's disability. The gaming aspects incorporated in the two rehabilitation robots helped maintain patients' interest high during execution of the assigned tasks by providing feedback on performance. The evaluation metric gave a precise measure of patients' performance and thus provides a tool to help therapists promote patient motivation and hence adherence to the training program.

Automotive Mechanics Articulation. A List of Tasks for Industrial Arts, Trades & Industry and Community College Instruction.

ERIC Educational Resources Information Center

Arizona State Univ., Tempe. Div. of Industrial Design and Technology.

A list of twenty-six major categories of tasks to be accomplished by automotive mechanics students at the secondary level in industrial arts and/or trades and industry programs and at the postsecondary level in community college programs is provided. The twenty-six categories are as follow: accessories--air conditioning, accessories--heaters,…

Skylab

NASA Image and Video Library

1972-01-01

This chart details Skylab's Time and Motion experiment (M151), a medical study to measure performance differences between tasks undertaken on Earth and the same tasks performed by Skylab crew members in orbit. Data collected from this experiment evaluated crew members' zero-gravity behavior for designs and work programs for future space exploration. The Marshall Space Flight Center had program management responsibility for the development of Skylab hardware and experiments.

Description and Results of the Air Force Research and Development Program for the Improvement of Maintenance Efficiency.

ERIC Educational Resources Information Center

Foley, John P., Jr.

An overview of the Air Force's Research and Development Program for the Improvement of Maintenance Efficiency is provided. First described are the steps found in any detailed task analysis, a process which results in the complete specification of each task involved in an overall maintenance effort. The factors influencing maintenance effectiveness…

It's in the Name: A Synthetic Inquiry of the Knowledge Is Power Program [KIPP

ERIC Educational Resources Information Center

Ellison, Scott

2012-01-01

The task of this article is to interrogate the Knowledge Is Power Program (KIPP) model to develop a more robust understanding of a prominent trend in the charter school movement and education policy more generally. To accomplish this task, this article details the findings of a synthetic analysis that examines the KIPP model as a Hegelian whole…

Army National Guard Companies Have Not Developed Effective Training Programs to Attain or Sustain Mission Essential Task Proficiency (REDACTED)

DTIC Science & Technology

2016-12-05

consist of at least five company -level units: headquarters , two rifle, and two armored units. Reconnaissance squadrons generally consist of at...least four company - level units: headquarters and three reconnaissance units...Brief (U) Army National Guard Companies Have Not Developed Effective Training Programs to Attain or Sustain Mission Essential Task Proficiency

A Hard Look at USDA's Rural Development Programs. The Report of the Rural Revitalization Task Force to the Secretary of Agriculture.

ERIC Educational Resources Information Center

Department of Agriculture Graduate School, Washington, DC.

This report addresses current economic conditions in rural America and offers recommendations about the role the United States Department of Agriculture (USDA) can play in providing rural development. The Task Force identifies issues for rural policy in the 1990's focusing on economic development. Current rural programs are described and…

Pennsylvania Blue Shield's Job Linked Skills Program. A Basic Skills Education Program. Final Performance Report.

ERIC Educational Resources Information Center

Pennsylvania Blue Shield, Camp Hill.

A project developed a model curriculum to be delivered by computer-based instruction to teach the required literacy skills for entry workers in the health insurance industry. Literacy task analyses were performed for the targeted jobs and then validated with focus groups. The job tasks and related basic skills were divided into modules. The job…

[Development of an integrative cognitive rehabilitation program for brain injured patients in the post-acute stage].

PubMed

Oh, Hyun Soo; Kim, Young Ran; Seo, Wha Sook; Seo, Yeon Ok

2005-04-01

This study was conducted to develop a comprehensive cognitive rehabilitation program that can be easily applied to brain injured patients by family members or nurses in community or hospital settings. A Systemic literature review design was used. Thirty-three related studies were reviewed. Based on the results of the literature review, the training tasks for attention were designated to enhancing 4 hierarchical areas, i.e., focused, selective, alternating, and divided attention. On the other hand, the memory rehabilitation tasks mainly consisted of mnemonic skills, such as the association method which helps patients memorize given information by linking together common attributes, the visual imagery method, and self-instruction method. The problem solving rehabilitation program included a task of games or plays which stimulated the patients' curiosity and interest. The training tasks for problem solving were to encourage the process of deriving reasonable solutions for a problematic situation resembling real problems that the patients were faced with in their everyday life. It is expected that the cognitive rehabilitation program developed from this study could help patients having difficulty in their every day life, due to a reduced cognitive ability resulting from brain injury, to effectively adapt to every day life.

Basic and applied research program. Semiannual report, July-December 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, B.L.

1979-12-01

The status of research projects in the Basic and Applied Research Program at SERI is presented for the semiannual period ending December 31, 1978. The five tasks in this program are grouped into Materials Research and Development, Materials Processing and Development, Photoconversion Research, Exploratory Research, and Energy Resource and Assessment and have been carried out by personnel in the Materials, Bio/Chemical Conversion, and Energy Resource and Assessment Branches. Subtask elements in the task areas include coatings and films, polymers, metallurgy and corrosion, optical materials, surfaces and interfaces in materials research and development; photochemistry, photoelectrochemistry, and photobiology in photoconversion; thin glassmore » mirror development, silver degradation of mirrors, hail resistance of thin glass, thin glass manufacturing, cellular glass development, and sorption by desiccants in materials processing and development; and thermoelectric energy conversion, desiccant cooling, photothermal degradation, and amorphous materials in exploratory research. For each task or subtask element, the overview, scope, goals, approach, apparatus and equipment, and supporting subcontracts are presented, as applicable, in addition to the status of the projects in each task or subtask. Listing of publications and reports authored by personnel associated with the Basic and Applied Research Program and prepared or published during 1978 are also included.« less

Behavioral Task Analysis

DTIC Science & Technology

2010-01-01

and related tech- nologies . Washington, DC: National Academies Press. Neisser , U . (1967) . Cognitive psychology. New York: Appleton-Century-Crofts...behavior (see Neisser [1967] for a review of the early stages of information processing). The result is a characterization of human tasks as involving

Creep-fatigue life prediction for engine hot section materials (isotropic)

NASA Technical Reports Server (NTRS)

Moreno, V.

1982-01-01

The objectives of this program are the investigation of fundamental approaches to high temperature crack initiation life prediction, identification of specific modeling strategies and the development of specific models for component relevant loading conditions. A survey of the hot section material/coating systems used throughout the gas turbine industry is included. Two material/coating systems will be identified for the program. The material/coating system designated as the base system shall be used throughout Tasks 1-12. The alternate material/coating system will be used only in Task 12 for further evaluation of the models developed on the base material. In Task II, candidate life prediction approaches will be screened based on a set of criteria that includes experience of the approaches within the literature, correlation with isothermal data generated on the base material, and judgements relative to the applicability of the approach for the complex cycles to be considered in the option program. The two most promising approaches will be identified. Task 3 further evaluates the best approach using additional base material fatigue testing including verification tests. Task 4 consists of technical, schedular, financial and all other reporting requirements in accordance with the Reports of Work clause.

Testing the accuracy of timing reports in visual timing tasks with a consumer-grade digital camera.

PubMed

Smyth, Rachael E; Oram Cardy, Janis; Purcell, David

2017-06-01

This study tested the accuracy of a visual timing task using a readily available and relatively inexpensive consumer grade digital camera. A visual inspection time task was recorded using short high-speed video clips and the timing as reported by the task's program was compared to the timing as recorded in the video clips. Discrepancies in these two timing reports were investigated further and based on display refresh rate, a decision was made whether the discrepancy was large enough to affect the results as reported by the task. In this particular study, the errors in timing were not large enough to impact the results of the study. The procedure presented in this article offers an alternative method for performing a timing test, which uses readily available hardware and can be used to test the timing in any software program on any operating system and display.

Overview of IEA biomass combustion activities

NASA Astrophysics Data System (ADS)

Hustad, J. E.

1994-07-01

The objectives of the International Energy Agency (IEA) bioenergy program are: (1) to encourage cooperative research, development and use of energy and the increased utilization of alternatives to oil; and (2) to establish increased program and project cooperation between participants in the whole field of bioenergy. There are four Task Annexes to the Implementing Agreement during the period 1992-1994: Efficient and Environmentally Sound Biomass Production Systems; Harvesting and Supply of Woody Biomass for Energy; Biomass Utilization; and Conversion of Municipal Solid Waste Feedstock to Energy. The report describes the following biomass combustion activities during the period 1992-1994: Round robin test of a wood stove; Emissions from biomass combustion; A pilot project cofiring biomass with oil to reduce SO2 emissions; Small scale biomass chip handling; Energy from contaminated wood waste combustion; Modeling of biomass combustion; Wood chip cogeneration; Combustion of wet biomass feedstocks, ash reinjection and carbon burnout; Oxidation of wet biomass; Catalytic combustion in small wood burning appliances; Characterization of biomass fuels and ashes; Measurement techniques (FTIR).

Investigation of iterative image reconstruction in low-dose breast CT

NASA Astrophysics Data System (ADS)

Bian, Junguo; Yang, Kai; Boone, John M.; Han, Xiao; Sidky, Emil Y.; Pan, Xiaochuan

2014-06-01

There is interest in developing computed tomography (CT) dedicated to breast-cancer imaging. Because breast tissues are radiation-sensitive, the total radiation exposure in a breast-CT scan is kept low, often comparable to a typical two-view mammography exam, thus resulting in a challenging low-dose-data-reconstruction problem. In recent years, evidence has been found that suggests that iterative reconstruction may yield images of improved quality from low-dose data. In this work, based upon the constrained image total-variation minimization program and its numerical solver, i.e., the adaptive steepest descent-projection onto the convex set (ASD-POCS), we investigate and evaluate iterative image reconstructions from low-dose breast-CT data of patients, with a focus on identifying and determining key reconstruction parameters, devising surrogate utility metrics for characterizing reconstruction quality, and tailoring the program and ASD-POCS to the specific reconstruction task under consideration. The ASD-POCS reconstructions appear to outperform the corresponding clinical FDK reconstructions, in terms of subjective visualization and surrogate utility metrics.

Improving balance, mobility, and dual-task performance in an adolescent with cerebral palsy: A case report.

PubMed

Fisher-Pipher, Sarah; Kenyon, Lisa K; Westman, Marci

2017-07-01

Improving functional mobility is often a desired outcome for adolescents with cerebral palsy (CP). Traditional neurorehabilitation approaches are frequently directed at impairments; however, improvements may not be carried over into functional mobility. The purpose of this case report was to describe the examination, intervention, and outcomes of a task-oriented physical therapy intervention program to improve dynamic balance, functional mobility, and dual-task performance in an adolescent with CP. The participant was a 15-year-old girl with spastic triplegic CP (Gross Motor Classification System Level II). Examination procedures included the Canadian Occupational Performance Measure, 6-minute walk test, Muscle Power Sprint Test, 10 x 5-meter sprint test, Timed Up and Down Stairs Test, Gross Motor Function Measure, Gillette Functional Assessment Questionnaire, and functional lower extremity strength tests. Intervention focused on task-oriented dynamic balance and mobility tasks that incorporated coordination and speed demands as well as task-specific lower extremity and trunk strengthening activities. Dual task demands were integrated into all intervention activities. Post-intervention testing revealed improvements in cardiovascular endurance, anaerobic power, agility, stair climbing, gross motor skills, and mobility. The participant appeared to benefit from a task-oriented program to improve dynamic balance, functional mobility, and dual-task performance.

Business and Marketing Cluster. Task Analyses.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

Developed in Virginia, this publication contains task analysis guides to support selected tech prep programs that prepare students for careers in the business and marketing cluster. Guides are included for accounting systems, legal systems administration, office systems technology, and retail marketing. Each task analyses guide has the following…

Advanced bridge safety initiative : FRP flexural retrofit for concrete slab bridges - task 4 deliverables.

DOT National Transportation Integrated Search

2014-06-01

Concrete slab bridges are being examined as part of the MaineDOT Advanced Bridge Safety Initiative. Under Tasks : 1 3 a finite element analysis program is developed, validated and applied to twenty bridges. : Task 4 investigates and develops a no...

Neural mechanisms underlying urgent and evaluative behaviors: An fMRI study on the interaction of automatic and controlled processes.

PubMed

Megías, Alberto; Navas, Juan Francisco; Petrova, Dafina; Cándido, Antonio; Maldonado, Antonio; Garcia-Retamero, Rocio; Catena, Andrés

2015-08-01

Dual-process theories have dominated the study of risk perception and risk-taking over the last two decades. However, there is a lack of objective brain-level evidence supporting the two systems of processing in every-day risky behavior. To address this issue, we propose the dissociation between evaluative and urgent behaviors as evidence of dual processing in risky driving situations. Our findings show a dissociation of evaluative and urgent behavior both at the behavioral and neural level. fMRI data showed an increase of activation in areas implicated in motor programming, emotional processing, and visuomotor integration in urgent behavior compared to evaluative behavior. These results support a more automatic processing of risk in urgent tasks, relying mainly on heuristics and experiential appraisal. The urgent task, which is characterized by strong time pressure and the possibility for negative consequences among others factors, creates a suitable context for the experiential-affective system to guide the decision-making process. Moreover, we observed greater frontal activation in the urgent task, suggesting the participation of cognitive control in safe behaviors. The findings of this research are relevant for the study of the neural mechanisms underlying dual process models in risky perception and decision-making, especially because of their proximity to everyday activities. © 2015 Wiley Periodicals, Inc.

Distributed task coding throughout the multiple demand network of the human frontal-insular cortex.

PubMed

Stiers, Peter; Mennes, Maarten; Sunaert, Stefan

2010-08-01

The large variety of tasks that humans can perform is governed by a small number of key frontal-insular regions that are commonly active during task performance. Little is known about how this network distinguishes different tasks. We report on fMRI data in twelve participants while they performed four cognitive tasks. Of 20 commonly active frontal-insular regions in each hemisphere, five showed a BOLD response increase with increased task demands, regardless of the task. Although active in all tasks, each task invoked a unique response pattern across the voxels in each area that proved reliable in split-half multi-voxel correlation analysis. Consequently, voxels differed in their preference for one or more of the tasks. Voxel-based functional connectivity analyses revealed that same preference voxels distributed across all areas of the network constituted functional sub-networks that characterized the task being executed. Copyright 2010 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schey, Stephen; Francfort, Jim

Task 1includes a survey of the inventory of non-tactical fleet vehicles at Naval Air Station Whidbey Island (NASWI) to characterize the fleet. This information and characterization are used to select vehicles for monitoring that takes place during Task 2. This monitoring involves data logging of vehicle operation in order to identify the vehicle’s mission and travel requirements. Individual observations of these selected vehicles provide the basis for recommendations related to PEV adoption. It also identifies whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements and provide observations related tomore » placement of PEV charging infrastructure. This report provides the results of the assessments and observations of the current non-tactical fleet, fulfilling the Task 1 requirements.« less

Research safety vehicle, Phase II. Volume I. Executive summary. Final report jul 75-dec 76

DOE Office of Scientific and Technical Information (OSTI.GOV)

Struble, D.

1976-12-01

Volume I summarizes the results of the Minicars Research Safety Vehicle Phase II program, as detailed in Volumes II and III. Phase I identified trends leading to the desired national social goals of the mid-1980's in vehicle crashworthiness, crash avoidance, damageability, pedestrian safety, fuel economy, emissions and cost, and characterized an RSV to satisfy them. In Phase II an RSV prototype was designed, developed and tested to demonstrate the feasibility of meeting these goals simultaneously. Although further refinement is necessary to assure operational validity, in all categories the results meet or exceed the most advanced performance specified by The Presidentialmore » Task Force on Motor Vehicle Goals beyond 1980.« less

Urban mosquitoes, situational publics, and the pursuit of interspecies separation in Dar es Salaam

PubMed Central

KELLY, ANN H.; LEZAUN, JAVIER

2014-01-01

Recent work in anthropology points to the recognition of multispecies entanglements as the grounds for a more ethical politics. In this article, we examine efforts to control mosquitoes in Dar es Salaam, Tanzania, as an example of the laborious tasks of disentanglement that characterize public health interventions. The mosquito surveillance and larval elimination practices of an urban malaria control program offer an opportunity to observe how efforts to create distance between species relate to the physical and civic textures of the city. Seen in the particular context of the contemporary African metropolis, the work of public health appears less a matter of control than a commitment to constant urban maintenance and political mobilization. PMID:25429167

Student Use of Physics to Make Sense of Incomplete but Functional VPython Programs in a Lab Setting

NASA Astrophysics Data System (ADS)

Weatherford, Shawn A.

2011-12-01

Computational activities in Matter & Interactions, an introductory calculus-based physics course, have the instructional goal of providing students with the experience of applying the same set of a small number of fundamental principles to model a wide range of physical systems. However there are significant instructional challenges for students to build computer programs under limited time constraints, especially for students who are unfamiliar with programming languages and concepts. Prior attempts at designing effective computational activities were successful at having students ultimately build working VPython programs under the tutelage of experienced teaching assistants in a studio lab setting. A pilot study revealed that students who completed these computational activities had significant difficultly repeating the exact same tasks and further, had difficulty predicting the animation that would be produced by the example program after interpreting the program code. This study explores the interpretation and prediction tasks as part of an instructional sequence where students are asked to read and comprehend a functional, but incomplete program. Rather than asking students to begin their computational tasks with modifying program code, we explicitly ask students to interpret an existing program that is missing key lines of code. The missing lines of code correspond to the algebraic form of fundamental physics principles or the calculation of forces which would exist between analogous physical objects in the natural world. Students are then asked to draw a prediction of what they would see in the simulation produced by the VPython program and ultimately run the program to evaluate the students' prediction. This study specifically looks at how the participants use physics while interpreting the program code and creating a whiteboard prediction. This study also examines how students evaluate their understanding of the program and modification goals at the beginning of the modification task. While working in groups over the course of a semester, study participants were recorded while they completed three activities using these incomplete programs. Analysis of the video data showed that study participants had little difficulty interpreting physics quantities, generating a prediction, or determining how to modify the incomplete program. Participants did not base their prediction solely from the information from the incomplete program. When participants tried to predict the motion of the objects in the simulation, many turned to their knowledge of how the system would evolve if it represented an analogous real-world physical system. For example, participants attributed the real-world behavior of springs to helix objects even though the program did not include calculations for the spring to exert a force when stretched. Participants rarely interpreted lines of code in the computational loop during the first computational activity, but this changed during latter computational activities with most participants using their physics knowledge to interpret the computational loop. Computational activities in the Matter & Interactions curriculum were revised in light of these findings to include an instructional sequence of tasks to build a comprehension of the example program. The modified activities also ask students to create an additional whiteboard prediction for the time-evolution of the real-world phenomena which the example program will eventually model. This thesis shows how comprehension tasks identified by Palinscar and Brown (1984) as effective in improving reading comprehension are also effective in helping students apply their physics knowledge to interpret a computer program which attempts to model a real-world phenomena and identify errors in their understanding of the use, or omission, of fundamental physics principles in a computational model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shipman, Galen M.

These are the slides for a presentation on programming models in HPC, at the Los Alamos National Laboratory's Parallel Computing Summer School. The following topics are covered: Flynn's Taxonomy of computer architectures; single instruction single data; single instruction multiple data; multiple instruction multiple data; address space organization; definition of Trinity (Intel Xeon-Phi is a MIMD architecture); single program multiple data; multiple program multiple data; ExMatEx workflow overview; definition of a programming model, programming languages, runtime systems; programming model and environments; MPI (Message Passing Interface); OpenMP; Kokkos (Performance Portable Thread-Parallel Programming Model); Kokkos abstractions, patterns, policies, and spaces; RAJA, a systematicmore » approach to node-level portability and tuning; overview of the Legion Programming Model; mapping tasks and data to hardware resources; interoperability: supporting task-level models; Legion S3D execution and performance details; workflow, integration of external resources into the programming model.« less

Functional Task Test (FTT)

NASA Technical Reports Server (NTRS)

Bloomberg, Jacob J.; Mulavara, Ajitkumar; Peters, Brian T.; Rescheke, Millard F.; Wood, Scott; Lawrence, Emily; Koffman, Igor; Ploutz-Snyder, Lori; Spiering, Barry A.; Feeback, Daniel L.;

Consolidated fuel reprossing program: The implications of force reflection for teleoperation in space

NASA Technical Reports Server (NTRS)

Draper, John V.; Herndon, Joseph N.; Moore, Wendy E.

1987-01-01

Previous research on teleoperator force feedback is reviewed and results of a testing program which assessed the impact of force reflection on teleoperator task performance are reported. Force relection is a type of force feedback in which the forces acting on the remote portion of the teleoperator are displayed to the operator by back-driving the master controller. The testing program compared three force reflection levels: 4 to 1 (four units of force on the slave produce one unit of force at the master controller), 1 to 1, and infinity to 1 (no force reflection). Time required to complete tasks, rate of occurrence of errors, the maximum force applied to tasks components, and variability in forces applied to components during completion of representative remote handling tasks were used as dependent variables. Operators exhibited lower error rates, lower peak forces, and more consistent application of forces using force relection than they did without it. These data support the hypothesis that force reflection provides useful information for teleoperator users. The earlier literature and the results of the experiment are discussed in terms of their implications for space based teleoperator systems. The discussion described the impact of force reflection on task completion performance and task strategies, as suggested by the literature. It is important to understand the trade-offs involved in using telerobotic systems with and without force reflection.

Locomotor Adaptation Improves Balance Control, Multitasking Ability and Reduces the Metabolic Cost of Postural Instability

NASA Technical Reports Server (NTRS)

Bloomberg, J. J.; Peters, B. T.; Mulavara, A. P.; Brady, R. A.; Batson, C. D.; Miller, C. A.; Ploutz-Snyder, R. J.; Guined, J. R.; Buxton, R. E.; Cohen, H. S.

2011-01-01

During exploration-class missions, sensorimotor disturbances may lead to disruption in the ability to ambulate and perform functional tasks during the initial introduction to a novel gravitational environment following a landing on a planetary surface. The overall goal of our current project is to develop a sensorimotor adaptability training program to facilitate rapid adaptation to these environments. We have developed a unique training system comprised of a treadmill placed on a motion-base facing a virtual visual scene. It provides an unstable walking surface combined with incongruent visual flow designed to enhance sensorimotor adaptability. Greater metabolic cost incurred during balance instability means more physical work is required during adaptation to new environments possibly affecting crewmembers? ability to perform mission critical tasks during early surface operations on planetary expeditions. The goal of this study was to characterize adaptation to a discordant sensory challenge across a number of performance modalities including locomotor stability, multi-tasking ability and metabolic cost. METHODS: Subjects (n=15) walked (4.0 km/h) on a treadmill for an 8 -minute baseline walking period followed by 20-minutes of walking (4.0 km/h) with support surface motion (0.3 Hz, sinusoidal lateral motion, peak amplitude 25.4 cm) provided by the treadmill/motion-base system. Stride frequency and auditory reaction time were collected as measures of locomotor stability and multi-tasking ability, respectively. Metabolic data (VO2) were collected via a portable metabolic gas analysis system. RESULTS: At the onset of lateral support surface motion, subj ects walking on our treadmill showed an increase in stride frequency and auditory reaction time indicating initial balance and multi-tasking disturbances. During the 20-minute adaptation period, balance control and multi-tasking performance improved. Similarly, throughout the 20-minute adaptation period, VO2 gradually decreased following an initial increase after the onset of support surface motion. DISCUSSION: Resu lts confirmed that walking in discordant conditions not only compromises locomotor stability and the ability to multi-task, but comes at a quantifiable metabolic cost. Importantly, like locomotor stability and multi-tasking ability, metabolic expenditure while walking in discordant sensory conditions improved during adaptation. This confirms that sensorimotor adaptability training can benefit multiple performance parameters central to the successful completion of critical mission tasks.

Claretian Medical Center Task Analysis. Worker Education Program.

ERIC Educational Resources Information Center

Union of Needletrades, Industrial and Textile Employees.

This task analysis for positions at the Claretian Medical Center in southeast Chicago was developed to improve communication and customer service in the workplace. The task analysis was prepared through clinic tours, employee interviews, and supervisor questionnaires. It is used for the purpose of curriculum development for onsite instruction in…

Neurolinguistic Programming: The Impact of Imagery Tasks on Sensory Predicate Usage.

ERIC Educational Resources Information Center

Graunke, Bruce; Roberts, T. Kevin

1985-01-01

Investigated the impact of varied imagining tasks on individuals' use of sensory predicates. Results demonstrated that subjects were able to vary their type of sensory predicates according to the task demands or situational context. Findings are incongruent with Bandler and Grinder's (1979) conceptualization of representational systems.…

Increasing On-Task Behavior through Motivational Activities

ERIC Educational Resources Information Center

Lantz, Christine; McKenna, Barbara; Price, Brianne; Stralow, Duane

2007-01-01

This report describes a program designed to increase students' on-task behavior. The students in the sample population consisted of kindergarten, first, and fifth graders. These classrooms are located in a community in northern Illinois. The problem of student behavior adversely affecting on-task behavior was well documented through a review of…

Business, Marketing and Management Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

The duties and tasks found in these task lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for business, marketing, and management occupations. The business, marketing, and management occupations are divided into eight clusters. The clusters and occupations are:…

Task Lists for Industrial Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Dimmlich, David

These cluster matrices provide duties and tasks that form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for industrial occupations. Duties and skills are presented for the following: (1) electric home appliance and power tool repairers; (2) office machine/cash register repairer; (3)…

Analyzing Tasks to Promote Equity in Secondary Mathematics Teacher Education

ERIC Educational Resources Information Center

Mintos, Alexia

2017-01-01

The purpose of this study is to understand characteristics and outcomes of instructional tasks used to support preservice secondary mathematics teachers (PSMTs) in learning about equity in secondary mathematics methods courses. This study focuses on five instructional tasks from four purposefully chosen teacher education programs. These activities…

Health Occupations. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

The duties and tasks found in these task lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for health occupations. The health occupations are divided into five clusters. The clusters and occupations are: health occupations, nursing occupations (home health aide, geriatric aide,…

Organizational and operational models for certificate management entities as part of the connected vehicle program : revised working paper (task 2).

DOT National Transportation Integrated Search

1997-01-01

This report summarizes the efforts performed under subtasks D&E of the ATIS Communications Technology Alternatives Task for the FHWA Turner Fairbank Highway Research Center. Tasks D & E were to facilitate further examination of wireless communication...

Case Studies in Job Analysis and Training Evaluation.

ERIC Educational Resources Information Center

McKillip, Jack

2001-01-01

An information technology certification program was evaluated by 1,671 systems engineers using job analysis that rated task importance. Professional librarians (n=527) rated importance of their tasks in similar fashion. Results of scatter diagrams provided evidence to enhance training effectiveness by focusing on job tasks significantly related to…

Gait bradykinesia in Parkinson's disease: a change in the motor program which controls the synergy of gait.

PubMed

Warabi, Tateo; Furuyama, Hiroyasu; Sugai, Eri; Kato, Masamichi; Yanagisawa, Nobuo

2018-01-01

This study examined how gait bradykinesia is changed by the motor programming in Parkinson's disease. Thirty-five idiopathic Parkinson's disease patients and nine age-matched healthy subjects participated in this study. After the patients fixated on a visual-fixation target (conditioning-stimulus), the voluntary-gait was triggered by a visual on-stimulus. While the subject walked on a level floor, soleus, tibialis anterior EMG latencies, and the y-axis-vector of the sole-floor reaction force were examined. Three paradigms were used to distinguish between the off-/on-latencies. The gap-task: the visual-fixation target was turned off; 200 ms before the on-stimulus was engaged (resulting in a 200 ms-gap). EMG latency was not influenced by the visual-fixation target. The overlap-task: the on-stimulus was turned on during the visual-fixation target presentation (200 ms-overlap). The no-gap-task: the fixation target was turned off and the on-stimulus was turned on simultaneously. The onset of EMG pause following the tonic soleus EMG was defined as the off-latency of posture (termination). The onset of the tibialis anterior EMG burst was defined as the on-latency of gait (initiation). In the gap-task, the on-latency was unchanged in all of the subjects. In Parkinson's disease, the visual-fixation target prolonged both the off-/on-latencies in the overlap-task. In all tasks, the off-latency was prolonged and the off-/on-latencies were unsynchronized, which changed the synergic movement to a slow, short-step-gait. The synergy of gait was regulated by two independent sensory-motor programs of the off- and on-latency levels. In Parkinson's disease, the delayed gait initiation was due to the difficulty in terminating the sensory-motor program which controls the subject's fixation. The dynamic gait bradykinesia was involved in the difficulty (long off-latency) in terminating the motor program of the prior posture/movement.

The efficacy of a multifactorial memory training in older adults living in residential care settings.

PubMed

Vranić, Andrea; Španić, Ana Marija; Carretti, Barbara; Borella, Erika

2013-11-01

Several studies have shown an increase in memory performance after teaching mnemonic techniques to older participants. However, transfer effects to non-trained tasks are generally either very small, or not found. The present study investigates the efficacy of a multifactorial memory training program for older adults living in a residential care center. The program combines teaching of memory strategies with activities based on metacognitive (metamemory) and motivational aspects. Specific training-related gains in the Immediate list recall task (criterion task), as well as transfer effects on measures of short-term memory, long-term memory, working memory, motivational (need for cognition), and metacognitive aspects (subjective measure of one's memory) were examined. Maintenance of training benefits was assessed after seven months. Fifty-one older adults living in a residential care center, with no cognitive impairments, participated in the study. Participants were randomly assigned to two programs: the experimental group attended the training program, while the active control group was involved in a program in which different psychological issues were discussed. A benefit in the criterion task and substantial general transfer effects were found for the trained group, but not for the active control, and they were maintained at the seven months follow-up. Our results suggest that training procedures, which combine teaching of strategies with metacognitive-motivational aspects, can improve cognitive functioning and attitude toward cognitive activities in older adults.

Reducing errors benefits the field-based learning of a fundamental movement skill in children.

PubMed

Capio, C M; Poolton, J M; Sit, C H P; Holmstrom, M; Masters, R S W

2013-03-01

Proficient fundamental movement skills (FMS) are believed to form the basis of more complex movement patterns in sports. This study examined the development of the FMS of overhand throwing in children through either an error-reduced (ER) or error-strewn (ES) training program. Students (n = 216), aged 8-12 years (M = 9.16, SD = 0.96), practiced overhand throwing in either a program that reduced errors during practice (ER) or one that was ES. ER program reduced errors by incrementally raising the task difficulty, while the ES program had an incremental lowering of task difficulty. Process-oriented assessment of throwing movement form (Test of Gross Motor Development-2) and product-oriented assessment of throwing accuracy (absolute error) were performed. Changes in performance were examined among children in the upper and lower quartiles of the pretest throwing accuracy scores. ER training participants showed greater gains in movement form and accuracy, and performed throwing more effectively with a concurrent secondary cognitive task. Movement form improved among girls, while throwing accuracy improved among children with low ability. Reduced performance errors in FMS training resulted in greater learning than a program that did not restrict errors. Reduced cognitive processing costs (effective dual-task performance) associated with such approach suggest its potential benefits for children with developmental conditions. © 2011 John Wiley & Sons A/S.

Performance on the Iowa gambling task is related to magnitude of weight loss and salivary cortisol in a diet-induced weight loss intervention in overweight women

USDA-ARS?s Scientific Manuscript database

The overall objective of this study was to examine the relationship between executive function, specifically decision making, and weight loss. We used the Iowa Gambling Task (IGT) to characterize decision making and compared performance on this task to weight loss in obese women (n=29) participatin...

Computational characterization of ordered nanostructured surfaces

NASA Astrophysics Data System (ADS)

Mohieddin Abukhdeir, Nasser

2016-08-01

A vital and challenging task for materials researchers is to determine relationships between material characteristics and desired properties. While the measurement and assessment of material properties can be complex, quantitatively characterizing their structure is frequently a more challenging task. This issue is magnified for materials researchers in the areas of nanoscience and nanotechnology, where material structure is further complicated by phenomena such as self-assembly, collective behavior, and measurement uncertainty. Recent progress has been made in this area for both self-assembled and nanostructured surfaces due to increasing accessibility of imaging techniques at the nanoscale. In this context, recent advances in nanomaterial surface structure characterization are reviewed including the development of new theory and image processing methods.

Method of development of the program of forming of parametrical drawings of details in the AutoCAD software product

NASA Astrophysics Data System (ADS)

Alshakova, E. L.

2017-01-01

The program in the AutoLISP language allows automatically to form parametrical drawings during the work in the AutoCAD software product. Students study development of programs on AutoLISP language with the use of the methodical complex containing methodical instructions in which real examples of creation of images and drawings are realized. Methodical instructions contain reference information necessary for the performance of the offered tasks. The method of step-by-step development of the program is the basis for training in programming on AutoLISP language: the program draws elements of the drawing of a detail by means of definitely created function which values of arguments register in that sequence in which AutoCAD gives out inquiries when performing the corresponding command in the editor. The process of the program design is reduced to the process of step-by-step formation of functions and sequence of their calls. The author considers the development of the AutoLISP program for the creation of parametrical drawings of details, the defined design, the user enters the dimensions of elements of details. These programs generate variants of tasks of the graphic works performed in educational process of "Engineering graphics", "Engineering and computer graphics" disciplines. Individual tasks allow to develop at students skills of independent work in reading and creation of drawings, as well as 3D modeling.

Management Auditing. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 5.

ERIC Educational Resources Information Center

Hemphill, John M., Jr.; Yoder, Dale

The management audit is described for possible application as an extension of the mission of the Office of Manpower Utilization (OMU) of the U.S. Marine Corps. The present mission of OMU is viewed as a manpower research program to conduct task analysis of Marine Corps occupational fields. Purpose of the analyses is to improve the functional areas…

Skylab

NASA Image and Video Library

1970-01-01

This 1970 photograph shows Skylab's Time and Motion experiment (M151) control unit, a medical study to measure performance differences between tasks undertaken on Earth and the same tasks performed by Skylab crew members in orbit. Data collected from this experiment evaluated crew members' zero-gravity behavior for designs and work programs for future space exploration. The Marshall Space Flight Center had program management responsibility for the development of Skylab hardware and experiments.

Factor and Organizational Substitutions to Minimize Costs in the Navy

DTIC Science & Technology

2013-12-01

navigation, propulsion, combat, hotel , communications, in-service support and any system corresponding to further tasks such as transport, hospital...propulsion, combat, hotel , communications, in-service support and any system corresponding to further tasks such as transport, hospital services and command...contract, a cadet may be able to increase her branch choice priority. The Officer Career Satisfaction Program (OCSP) is an incentive program with

Nebraska Prostate Cancer Research Program

DTIC Science & Technology

2011-05-01

is a multifunctional transmembrane receptor. The major function is to transport lysosome enzymes from where they are processed in the Golgi apparatus ...potential improvement for new students in the summer of 2011. Task 5: Announcement of the Year 2 Research Program (months 13-15) Done. Per...various research facilities and biotech companies. Currently, we are waiting for the arrival of the new students. Task 7: Summer Research (month 19

Ames Research Center SR&T program and earth observations

NASA Technical Reports Server (NTRS)

Poppoff, I. G.

1972-01-01

An overview is presented of the research activities in earth observations at Ames Research Center. Most of the tasks involve the use of research aircraft platforms. The program is also directed toward the use of the Illiac 4 computer for statistical analysis. Most tasks are weighted toward Pacific coast and Pacific basin problems with emphasis on water applications, air applications, animal migration studies, and geophysics.

Implementing Task-Based Language Teaching to Integrate Language Skills in an EFL Program at a Colombian University

ERIC Educational Resources Information Center

Córdoba Zúñiga, Eulices

2016-01-01

This article reports the findings of a qualitative research study conducted with six first semester students of an English as a foreign language program in a public university in Colombia. The aim of the study was to implement task-based language teaching as a way to integrate language skills and help learners to improve their communicative…

Surveying through Text Message: Planning, Programming, and Analyzing

DTIC Science & Technology

2009-04-01

12 7. Trivia Task with steps programmed. ................................................................. 12 8. Import users subscreen...enable the system to process the answers and send the questions automatically, the Trivia Task was activated. 12 Administration Once the Trivia ...r e s e a r c h a t w o r k N P R S T Navy Personnel Research, Studies, and Technology 5720 Integrity Drive • Millington, Tennessee 38055-1000

GANGA: A tool for computational-task management and easy access to Grid resources

NASA Astrophysics Data System (ADS)

Mościcki, J. T.; Brochu, F.; Ebke, J.; Egede, U.; Elmsheuser, J.; Harrison, K.; Jones, R. W. L.; Lee, H. C.; Liko, D.; Maier, A.; Muraru, A.; Patrick, G. N.; Pajchel, K.; Reece, W.; Samset, B. H.; Slater, M. W.; Soroko, A.; Tan, C. L.; van der Ster, D. C.; Williams, M.

2009-11-01

In this paper, we present the computational task-management tool GANGA, which allows for the specification, submission, bookkeeping and post-processing of computational tasks on a wide set of distributed resources. GANGA has been developed to solve a problem increasingly common in scientific projects, which is that researchers must regularly switch between different processing systems, each with its own command set, to complete their computational tasks. GANGA provides a homogeneous environment for processing data on heterogeneous resources. We give examples from High Energy Physics, demonstrating how an analysis can be developed on a local system and then transparently moved to a Grid system for processing of all available data. GANGA has an API that can be used via an interactive interface, in scripts, or through a GUI. Specific knowledge about types of tasks or computational resources is provided at run-time through a plugin system, making new developments easy to integrate. We give an overview of the GANGA architecture, give examples of current use, and demonstrate how GANGA can be used in many different areas of science. Catalogue identifier: AEEN_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEN_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL No. of lines in distributed program, including test data, etc.: 224 590 No. of bytes in distributed program, including test data, etc.: 14 365 315 Distribution format: tar.gz Programming language: Python Computer: personal computers, laptops Operating system: Linux/Unix RAM: 1 MB Classification: 6.2, 6.5 Nature of problem: Management of computational tasks for scientific applications on heterogenous distributed systems, including local, batch farms, opportunistic clusters and Grids. Solution method: High-level job management interface, including command line, scripting and GUI components. Restrictions: Access to the distributed resources depends on the installed, 3rd party software such as batch system client or Grid user interface.

Alterations in Resting-State Activity Relate to Performance in a Verbal Recognition Task

PubMed Central

López Zunini, Rocío A.; Thivierge, Jean-Philippe; Kousaie, Shanna; Sheppard, Christine; Taler, Vanessa

2013-01-01

In the brain, resting-state activity refers to non-random patterns of intrinsic activity occurring when participants are not actively engaged in a task. We monitored resting-state activity using electroencephalogram (EEG) both before and after a verbal recognition task. We show a strong positive correlation between accuracy in verbal recognition and pre-task resting-state alpha power at posterior sites. We further characterized this effect by examining resting-state post-task activity. We found marked alterations in resting-state alpha power when comparing pre- and post-task periods, with more pronounced alterations in participants that attained higher task accuracy. These findings support a dynamical view of cognitive processes where patterns of ongoing brain activity can facilitate –or interfere– with optimal task performance. PMID:23785436

Report of the Cost Assessment and Validation Task Force on the International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

The Cost Assessment and Validation (CAV) Task Force was established for independent review and assessment of cost, schedule and partnership performance on the International Space Station (ISS) Program. The CAV Task Force has made the following key findings: The International Space Station Program has made notable and reasonable progress over the past four years in defining and executing a very challenging and technically complex effort. The Program size, complexity, and ambitious schedule goals were beyond that which could be reasonably achieved within the $2.1 billion annual cap or $17.4 billion total cap. A number of critical risk elements are likely to have an adverse impact on the International Space Station cost and schedule. The schedule uncertainty associated with Russian implementation of joint Partnership agreements is the major threat to the ISS Program. The Fiscal Year (FY) 1999 budget submission to Congress is not adequate to execute the baseline ISS Program, cover normal program growth, and address the known critical risks. Additional annual funding of between $130 million and $250 million will be required. Completion of ISS assembly is likely to be delayed from one to three years beyond December 2003.

Cost Assessment and Validation Task Force on the International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

The Cost Assessment and Validation (CAV) Task Force was established for independent review and assessment of cost, schedule and partnership performance on the International Space Station (ISS) Program. The CAV Task Force has made the following key findings: The International Space Station Program has made notable and reasonable progress over the past four years in defining and executing a very challenging and technically complex effort; The Program, size, complexity, and ambitious schedule goals were beyond that which could be reasonably achieved within the $2.1 billion annual cap or $17.4 billion total cap; A number of critical risk elements are likely to have an adverse impact on the International Space Station cost and schedule; The schedule uncertainty associated with Russian implementation of joint Partnership agreements is the major threat to the ISS Program; The Fiscal Year (FY) 1999 budget submission to Congress is not adequate to execute the baseline ISS Program, cover normal program, growth, and address the known critical risks. Additional annual funding of between $130 million and $250 million will be required; and Completion of ISS assembly is likely to be delayed from, one to three years beyond December 2003.

Home-based interventions improve trained, but not novel, dual-task balance performance in older adults: A randomized controlled trial.

PubMed

Wongcharoen, Suleeporn; Sungkarat, Somporn; Munkhetvit, Peeraya; Lugade, Vipul; Silsupadol, Patima

2017-02-01

The purpose of this study was to compare the efficacy of four different home-based interventions on dual-task balance performance and to determine the generalizability of the four trainings to untrained tasks. Sixty older adults, aged 65 and older, were randomly assigned to one of four home-based interventions: single-task motor training, single-task cognitive training, dual-task motor-cognitive training, and dual-task cognitive-cognitive training. Participants received 60-min individualized training sessions, 3 times a week for 4 weeks. Prior to and following the training program, participants were asked to walk under two single-task conditions (i.e. narrow walking and obstacle crossing) and two dual-task conditions (i.e. a trained narrow walking while performing verbal fluency task and an untrained obstacle crossing while counting backward by 3s task). A nine-camera motion capture system was used to collect the trajectories of 32 reflective markers placed on bony landmarks of participants. Three-dimensional kinematics of the whole body center of mass and base of support were computed. Results from the extrapolated center of mass displacement indicated that motor-cognitive training was more effective than the single-task motor training to improve dual-task balance performance (p=0.04, ES=0.11). Interestingly, balance performance under both single-task and dual-task conditions can also be improved through a non-motor, single-task cognitive training program (p=0.01, ES=0.13, and p=0.01, ES=0.11, respectively). However, improved dual-task processing skills during training were not transferred to the novel dual task (p=0.15, ES=0.09). This is the first study demonstrating that home-based dual-task training can be effectively implemented to improve balance performance during gait in older adults. Copyright © 2016 Elsevier B.V. All rights reserved.

Human Research Program Human Health Countermeasures Element Sensorimotor Risk Standing Review Panel (SRP) Final Report

NASA Technical Reports Server (NTRS)

Peterson, Barry

2009-01-01

The Sensorimotor Risk Standing Review Panel (SRP) met at the NASA Johnson Space Center on October 4-6, 2009 to discuss the areas of future research targeted by the Human Health Countermeasures (HHC) Element of the Human Research Program (HRP). Using evidence-based knowledge as a background for risks, NASA had identified gaps in knowledge to address those risks. Ongoing and proposed tasks were presented to address the gaps. The charge to the Sensorimotor Risk SRP was to review the gaps, evaluate whether the tasks addressed these gaps and to make recommendations to NASA s HRP Science Management Office regarding the SRP's review. The SRP was requested to evaluate the practicality of the proposed efforts in light of the realistic demands placed on the HRP. In short, all tasks presented in the Integrated Research Plan (IRP) should address specific risks related to the challenges faced by the astronauts as a result of prolonged exposure to microgravity. All tasks proposed to fill the gaps in knowledge should provide applied, translational data necessary to address the specific risks. Several presentations were made to the SRP during the site visit and the SRP spent sufficient time to address the panel charge, either as a group or in separate sessions. The SRP made a final debriefing to the HRP Program Scientist. Taking the evidence and the risk as givens, the SRP reached the following conclusions: 1) the panel is very supportive of and endorses the present activities of the Sensorimotor Risk; and the panel is likewise supportive of the gaps and associated tasks in the IRP; 2) overall, the tasks addressed the gaps in the IRP; 3) there were some gaps and tasks that merit further enhancement and some new gaps/tasks that the SRP recommends.

Assessing Organizational Readiness for a Participatory Occupational Health/Health Promotion Intervention in Skilled Nursing Facilities

PubMed Central

Zhang, Yuan; Flum, Marian; West, Cheryl; Punnett, Laura

2018-01-01

The long-term care sector is characterized by high morbidity and employee turnover, along with associated costs. Effective health protection and health promotion are important to improve physical and psychosocial well-being of caregivers. Assessment of organizational readiness for change is an essential precursor to the successful implementation of workplace programs addressing work climate, structure of tasks and relationships, and other issues that may be perceived as challenging by some within the institution. This study qualitatively assessed readiness of five skilled nursing facilities for a participatory occupational health/health promotion intervention. Selection criteria were developed to screen for program feasibility and ability to conduct prospective evaluations, and information was collected from managers and employees (interviews and focus groups). Three centers were selected for the program, and the first year of formative evaluation and intervention experience was then reviewed to evaluate and modify our selection criteria after the fact. Lessons learned include adding assessment of communication and the structure of problem solving to our selection criteria, improving methods to assess management support in a concrete (potentially nonverbal) form, and obtaining a stated financial commitment and resources to enable the team to function. Assessment of organizational readiness for change is challenging, although necessary to implement effective and sustainable health promotion programs in specific organizations. PMID:25715335

System For Research On Multiple-Arm Robots

NASA Technical Reports Server (NTRS)

Backes, Paul G.; Hayati, Samad; Tso, Kam S.; Hayward, Vincent

1991-01-01

Kali system of computer programs and equipment provides environment for research on distributed programming and distributed control of coordinated-multiple-arm robots. Suitable for telerobotics research involving sensing and execution of low level tasks. Software and configuration of hardware designed flexible so system modified easily to test various concepts in control and programming of robots, including multiple-arm control, redundant-arm control, shared control, traded control, force control, force/position hybrid control, design and integration of sensors, teleoperation, task-space description and control, methods of adaptive control, control of flexible arms, and human factors.

KALI - An environment for the programming and control of cooperative manipulators

NASA Technical Reports Server (NTRS)

Hayward, Vincent; Hayati, Samad

1988-01-01

A design description is given of a controller for cooperative robots. The background and motivation for multiple arm control are discussed. A set of programming primitives which permit a programmer to specify cooperative tasks are described. Motion primitives specify asynchronous motions, master/slave motions, and cooperative motions. In the context of cooperative robots, trajectory generation issues are discussed and the authors' implementation briefly described. The relations between programming and control in the case of multiple robots are examined. The allocation of various tasks among a multiprocessor computer is described.

Scientific Merit Review of Directed Research Tasks Within the NASA Human Research Program

NASA Technical Reports Server (NTRS)

Charles, John B.

2010-01-01

The Human Research Program is instrumental in developing and delivering research findings, health countermeasures, and human systems technologies for spacecraft. :HRP is subdivided into 6 research entities, or Elements. Each Element is charged with providing the Program with knowledge and capabilities to conduct research to address the human health and performance risks as well as advance the readiness levels of technology and countermeasures. Project: An Element may be further subdivided into Projects, which are defined as an integrated set of tasks undertaken to deliver a product or set of products

Nothing New Under the Sun: Benefiting from the Great Lessons of History to Develop a Coherent Cyberspace Deterrence Strategy

DTIC Science & Technology

2012-05-12

LESSONS OF HISTORY TO DEVELOP A COHERENT CYBERSPACE DETERRENCE STRATEGY 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHDR!SI 5d. PROJECT ...AFOSR-82-1234. 5c. PROGRAM ELEMENT NUMBER. Enter all program element numbers as they appear in the report, e.g. 61101 A. 5d. PROJECT NUMBER...Enter all project numbers as they appear in the report, e.g. 1F665702D1257; ILIR. 5e. TASK NUMBER. Enter all task numbers as they appear in the

NASA's 2004 Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jacobson, David T.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2004-01-01

An overview of NASA's Hall thruster research and development tasks conducted during fiscal year 2004 is presented. These tasks focus on: raising the technology readiness level of high power Hall thrusters, developing a moderate-power/ moderate specific impulse Hall thruster, demonstrating high-power/high specific impulse Hall thruster operation, and addressing the fundamental technical challenges of emerging Hall thruster concepts. Programmatic background information, technical accomplishments and out year plans for each program element performed under the sponsorship of the In-Space Transportation Program, Project Prometheus, and the Energetics Project are provided.

Early Program Development

NASA Image and Video Library

1969-01-01

This 1969 artist's concept illustrates the use of three major elements of NASA's Integrated program, as proposed by President Nixon's Space Task Group. In Phases I and II, a Space Tug with a manipulator-equipped crew module removes a cargo module from an early Space Shuttle Orbiter and docks with it. In Phases III and IV, the Space Tug with attached cargo module flys toward a Nuclear Shuttle. As a result of the Space Task Group's recommendations for more commonality and integration in the American space program, Marshall Space Flight Center engineers studied many of the spacecraft depicted here.

Microgravity science and applications: Program tasks and bibliography for FY 1992

NASA Technical Reports Server (NTRS)

1993-01-01

This report is a compilation of the FY 1992 Principal Investigator program task descriptions funded by the Microgravity Science and Applications Division (MSAD), NASA Headquarters, Washington, DC. The document also provides a bibliography of FY 1992 publications and presentations cited by MSAD Principal Investigators, and an index of the Principal Investigators and their affiliations. The purpose of the document is to provide an overview and progress report for the funded tasks for scientists and researchers in industry, university, and government communities. The tasks are grouped into three categories appropriate to the type of research being done-space flight, ground based, and advanced technology development-and by science discipline. The science disciplines are: biotechnology, combustion science,, electronic materials, fluid physics, fundamental physics, glass and ceramics, metals and alloys, and protein crystal growth.

Improved silicon carbide for advanced heat engines

NASA Technical Reports Server (NTRS)

Whalen, Thomas J.

1988-01-01

This is the third annual technical report for the program entitled, Improved Silicon Carbide for Advanced Heat Engines, for the period February 16, 1987 to February 15, 1988. The objective of the original program was the development of high strength, high reliability silicon carbide parts with complex shapes suitable for use in advanced heat engines. Injection molding is the forming method selected for the program because it is capable of forming complex parts adaptable for mass production on an economically sound basis. The goals of the revised program are to reach a Weibull characteristic strength of 550 MPa (80 ksi) and a Weibull modulus of 16 for bars tested in 4-point loading. Two tasks are discussed: Task 1 which involves materials and process improvements, and Task 2 which is a MOR bar matrix to improve strength and reliability. Many statistically designed experiments were completed under task 1 which improved the composition of the batches, the mixing of the powders, the sinter and anneal cycles. The best results were obtained by an attritor mixing process which yielded strengths in excess of 550 MPa (80 ksi) and an individual Weibull modulus of 16.8 for a 9-sample group. Strengths measured at 1200 and 1400 C were equal to the room temperature strength. Annealing of machined test bars significantly improved the strength. Molding yields were measured and flaw distributions were observed to follow a Poisson process. The second iteration of the Task 2 matrix experiment is described.

Functional MRI of Handwriting Tasks: A Study of Healthy Young Adults Interacting with a Novel Touch-Sensitive Tablet

PubMed Central

Karimpoor, Mahta; Churchill, Nathan W.; Tam, Fred; Fischer, Corinne E.; Schweizer, Tom A.; Graham, Simon J.

2018-01-01

Handwriting is a complex human activity that engages a blend of cognitive and visual motor skills. Current understanding of the neural correlates of handwriting has largely come from lesion studies of patients with impaired handwriting. Task-based fMRI studies would be useful to supplement this work. To address concerns over ecological validity, previously we developed a fMRI-compatible, computerized tablet system for writing and drawing including visual feedback of hand position and an augmented reality display. The purpose of the present work is to use the tablet system in proof-of-concept to characterize brain activity associated with clinically relevant handwriting tasks, originally developed to characterize handwriting impairments in Alzheimer’s disease patients. As a prelude to undertaking fMRI studies of patients, imaging was performed of twelve young healthy subjects who copied sentences, phone numbers, and grocery lists using the fMRI-compatible tablet. Activation maps for all handwriting tasks consisted of a distributed network of regions in reasonable agreement with previous studies of handwriting performance. In addition, differences in brain activity were observed between the test subcomponents consistent with different demands of neural processing for successful task performance, as identified by investigating three quantitative behavioral metrics (writing speed, stylus contact force and stylus in air time). This study provides baseline behavioral and brain activity results for fMRI studies that adopt this handwriting test to characterize patients with brain impairments. PMID:29487511

Functional MRI of Handwriting Tasks: A Study of Healthy Young Adults Interacting with a Novel Touch-Sensitive Tablet.

PubMed

Karimpoor, Mahta; Churchill, Nathan W; Tam, Fred; Fischer, Corinne E; Schweizer, Tom A; Graham, Simon J

2018-01-01

Handwriting is a complex human activity that engages a blend of cognitive and visual motor skills. Current understanding of the neural correlates of handwriting has largely come from lesion studies of patients with impaired handwriting. Task-based fMRI studies would be useful to supplement this work. To address concerns over ecological validity, previously we developed a fMRI-compatible, computerized tablet system for writing and drawing including visual feedback of hand position and an augmented reality display. The purpose of the present work is to use the tablet system in proof-of-concept to characterize brain activity associated with clinically relevant handwriting tasks, originally developed to characterize handwriting impairments in Alzheimer's disease patients. As a prelude to undertaking fMRI studies of patients, imaging was performed of twelve young healthy subjects who copied sentences, phone numbers, and grocery lists using the fMRI-compatible tablet. Activation maps for all handwriting tasks consisted of a distributed network of regions in reasonable agreement with previous studies of handwriting performance. In addition, differences in brain activity were observed between the test subcomponents consistent with different demands of neural processing for successful task performance, as identified by investigating three quantitative behavioral metrics (writing speed, stylus contact force and stylus in air time). This study provides baseline behavioral and brain activity results for fMRI studies that adopt this handwriting test to characterize patients with brain impairments.

Male Smokers' and Non-Smokers' Response Inhibition in Go/No-Go Tasks: Effect of Three Task Parameters

PubMed Central

Zhao, Xin; Liu, Xiaoting; Zan, Xiangyi; Jin, Ge; Maes, Joseph H. R.

2016-01-01

Impaired response inhibition plays a major role in many addictive behaviors. However, in studies using go/no-go tasks, findings regarding the presence of response inhibition deficits in nicotine-dependent individuals are mixed. This might be due to differences between studies on a number of task parameters. Here we aimed to identify task conditions under which go/no-go task performance deficits can be observed in smokers and to characterize the nature of such deficits. Sixty-one male students (30 smokers, 31 non-smokers) performed a go/no-go task while independently manipulating three task parameters: (1) percentage no-go trials (50% or 25%), (2) stimulus presentation time (600 ms or 200 ms), and (3) nature of no-go stimuli (cigarette related or cigarette unrelated). Three measures, reaction time on go trials and percentage correct responses on go and no-go trials, served as performance indicators. Under 200-ms but not 600-ms stimulus presentation conditions, the smokers responded faster on go trials and made more errors on both go and no-go trials than the non-smokers did. These differences occurred irrespective of the percentage of no-go trials and nature of no-go stimuli. The accuracy differences disappeared after controlling for the response time differences, suggesting a strong speed-accuracy trade-off. This study contributes to unraveling the conditions under which smokers display impaired inhibition performance and helps to characterize the nature of this impairment. Under task conditions prompting fast responding, smokers are more prone to increase response speed and to make more errors than non-smokers. PMID:27500831

Implicit Coordination Strategies for Effective Team Communication.

PubMed

Butchibabu, Abhizna; Sparano-Huiban, Christopher; Sonenberg, Liz; Shah, Julie

2016-06-01

We investigated implicit communication strategies for anticipatory information sharing during team performance of tasks with varying degrees of complexity. We compared the strategies used by teams with the highest level of performance to those used by the lowest-performing teams to evaluate the frequency and methods of communications used as a function of task structure. High-performing teams share information by anticipating the needs of their teammates rather than explicitly requesting the exchange of information. As the complexity of a task increases to involve more interdependence among teammates, the impact of coordination on team performance also increases. This observation motivated us to conduct a study of anticipatory information sharing as a function of task complexity. We conducted an experiment in which 13 teams of four people performed collaborative search-and-deliver tasks with varying degrees of complexity in a simulation environment. We elaborated upon prior characterizations of communication as implicit versus explicit by dividing implicit communication into two subtypes: (a) deliberative/goal information and (b) reactive status updates. We then characterized relationships between task structure, implicit communication, and team performance. We found that the five teams with the fastest task completion times and lowest idle times exhibited higher rates of deliberative communication versus reactive communication during high-complexity tasks compared with the five teams with the slowest completion times and longest idle times (p = .039). Teams in which members proactively communicated information about their next goal to teammates exhibited improved team performance. The findings from our work can inform the design of communication strategies for team training to improve performance of complex tasks. © 2016, Human Factors and Ergonomics Society.

X-Windows Socket Widget Class

NASA Technical Reports Server (NTRS)

Barry, Matthew R.

2006-01-01

The X-Windows Socket Widget Class ("Class" is used here in the object-oriented-programming sense of the word) was devised to simplify the task of implementing network connections for graphical-user-interface (GUI) computer programs. UNIX Transmission Control Protocol/Internet Protocol (TCP/IP) socket programming libraries require many method calls to configure, operate, and destroy sockets. Most X Windows GUI programs use widget sets or toolkits to facilitate management of complex objects. The widget standards facilitate construction of toolkits and application programs. The X-Windows Socket Widget Class encapsulates UNIX TCP/IP socket-management tasks within the framework of an X Windows widget. Using the widget framework, X Windows GUI programs can treat one or more network socket instances in the same manner as that of other graphical widgets, making it easier to program sockets. Wrapping ISP socket programming libraries inside a widget framework enables a programmer to treat a network interface as though it were a GUI.

California Publicly-Owned Utilities (POUs) – LBNL ‘Beyond Widgets’ Project. Task: ambient lighting and occupancy-based plug load control. System Program Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Alastair; Mathew, Paul A.; Regnier, Cynthia

This program manual contains detailed technical information for implementing an incentive program for task-ambient lighting and occupancy-based plug load control. This manual was developed by Lawrence Berkeley National Laboratory, in collaboration with the California Publicly-Owned Utilities (CA POUs) as a partner in the ‘Beyond Widgets’ program funded by the U.S. Department of Energy Building Technologies Office. The primary audience for this manual is the program staff of the various CA POUs. It may also be used by other utility incentive programs to help develop similar programs. It is anticipated that the content of this manual be utilized by the CAmore » POU staff for developing related documents such as the Technical Resource Manual and other filings pertaining to the rollout of an energy systems-based rebate incentive program.« less

Third Report of the Task Force on the Shuttle-Mir Rendezvous and Docking Missions

NASA Technical Reports Server (NTRS)

1994-01-01

In May 1994, the Task Force on the Shuttle-Mir Rendezvous and Docking Missions was established by the NASA Advisory Council. Its purpose is to review Phase 1 (Shuttle-Mir) planning, training, operations, rendezvous and docking, and management and to provide interim reports containing specific recommendations to the Advisory Council. Phase 1 represents the building block to create the experience and technical expertise for an International Space Station. The Phase 1 program brings together the United States and Russia in a major cooperative and contractual program that takes advantage of both countries' capabilities. The content of the Phase 1 program consists of the following elements as defined by the Phase 1 Program Management Plan, dated October 6, 1994: Shuttle-Mir rendezvous and docking missions; astronaut long duration presence on Mir Requirements for Mir support of Phase 1 when astronauts are not on board; outfitting Spektr and Priroda modules with NASA science, research, and risk mitigation equipment Related ground support requirements of NASA and the Russian Space Agency (RSA) to support Phase 1 Integrated NASA and RSA launch schedules and manifests The first meeting of the Task Force was held at the Johnson Space Center (JSC) on May 24 and 25, 1994 with a preliminary report submitted to the NASA Advisory Council on June 6, 1994. The second meeting of the Task Force was held at JSC on July 12 and 13, 1994 and a detailed report containing a series of specific recommendations was submitted on July 29, 1994. This report reflects the results of the third Task Force meeting which was held at JSC on 11 and 12 October, 1994. The briefings presented at that meeting reviewed NASA's response to the Task Force recommendations made to date and provided background data and current status on several critical areas which the Task Force had not addressed in its previous reports.

NBS (National Bureau of Standards): Materials measurements

NASA Technical Reports Server (NTRS)

Manning, J. R.

1985-01-01

NBS work for NASA in support of NASA's Microgravity Science and Applications Program under NASA Government Order H-27954B (Properties of Electronic Materials) covering the period April 1, 1984 to March 31, 1985 is described. The work has been carried out in three independent tasks: Task 1--Surface Tensions and Their Variations with Temperature and Impurities; Task 2--Convention during Unidirectional Solidification; Task 3--Measurement of High Temperature Thermodynamic Properties. The results for each task are given separately in the body of the report.

Test Plans. Lightweight Durable TPS: Tasks 1,2,4,5, and 6

NASA Technical Reports Server (NTRS)

Greenberg, H. S.; Tu, Tina

1994-01-01

The objective of this task is to develop the fluted core flexible blankets, also referred to as the Tailorable Advanced Blanket Insulation (TABI), to a technology readiness level (TRL) of 6. This task is one of the six tasks under TA 3, Lightweight Durable TPS study, of the Single Stage to Orbit (SSTO) program. The purpose of this task is to develop a durable and low maintenance flexible TPS blanket material to be implemented on the SSTO vehicle.

Robotics for mixed waste operations, demonstration description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, C.R.

The Department of Energy (DOE) Office of Technology Development (OTD) is developing technology to aid in the cleanup of DOE sites. Included in the OTD program are the Robotics Technology Development Program and the Mixed Waste Integrated Program. These two programs are working together to provide technology for the cleanup of mixed waste, which is waste that has both radioactive and hazardous constituents. There are over 240,000 cubic meters of mixed low level waste accumulated at DOE sites and the cleanup is expected to generate about 900,000 cubic meters of mixed low level waste over the next five years. Thismore » waste must be monitored during storage and then treated and disposed of in a cost effective manner acceptable to regulators and the states involved. The Robotics Technology Development Program is developing robotics technology to make these tasks safer, better, faster and cheaper through the Mixed Waste Operations team. This technology will also apply to treatment of transuranic waste. The demonstration at the Savannah River Site on November 2-4, 1993, showed the progress of this technology by DOE, universities and industry over the previous year. Robotics technology for the handling, characterization and treatment of mixed waste as well robotics technology for monitoring of stored waste was demonstrated. It was shown that robotics technology can make future waste storage and waste treatment facilities better, faster, safer and cheaper.« less

Language-Specific Attention Treatment for Aphasia: Description and Preliminary Findings.

PubMed

Peach, Richard K; Nathan, Meghana R; Beck, Katherine M

2017-02-01

The need for a specific, language-based treatment approach to aphasic impairments associated with attentional deficits is well documented. We describe language-specific attention treatment, a specific skill-based approach for aphasia that exploits increasingly complex linguistic tasks that focus attention. The program consists of eight tasks, some with multiple phases, to assess and treat lexical and sentence processing. Validation results demonstrate that these tasks load on six attentional domains: (1) executive attention; (2) attentional switching; (3) visual selective attention/processing speed; (4) sustained attention; (5) auditory-verbal working memory; and (6) auditory processing speed. The program demonstrates excellent inter- and intrarater reliability and adequate test-retest reliability. Two of four people with aphasia exposed to this program demonstrated good language recovery whereas three of the four participants showed improvements in auditory-verbal working memory. The results provide support for this treatment program in patients with aphasia having no greater than a moderate degree of attentional impairment. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Time-on-task effects in children with and without ADHD: depletion of executive resources or depletion of motivation?

PubMed

Dekkers, Tycho J; Agelink van Rentergem, Joost A; Koole, Alette; van den Wildenberg, Wery P M; Popma, Arne; Bexkens, Anika; Stoffelsen, Reino; Diekmann, Anouk; Huizenga, Hilde M

2017-12-01

Children with attention-deficit/hyperactivity disorder (ADHD) are characterized by deficits in their executive functioning and motivation. In addition, these children are characterized by a decline in performance as time-on-task increases (i.e., time-on-task effects). However, it is unknown whether these time-on-task effects should be attributed to deficits in executive functioning or to deficits in motivation. Some studies in typically developing (TD) adults indicated that time-on-task effects should be interpreted as depletion of executive resources, but other studies suggested that they represent depletion of motivation. We, therefore, investigated, in children with and without ADHD, whether there were time-on-task effects on executive functions, such as inhibition and (in)attention, and whether these were best explained by depletion of executive resources or depletion of motivation. The stop-signal task (SST), which generates both indices of inhibition (stop-signal reaction time) and attention (reaction time variability and errors), was administered in 96 children (42 ADHD, 54 TD controls; aged 9-13). To differentiate between depletion of resources and depletion of motivation, the SST was administered twice. Half of the participants was reinforced during second task performance, potentially counteracting depletion of motivation. Multilevel analyses indicated that children with ADHD were more affected by time-on-task than controls on two measures of inattention, but not on inhibition. In the ADHD group, reinforcement only improved performance on one index of attention (i.e., reaction time variability). The current findings suggest that time-on-task effects in children with ADHD occur specifically in the attentional domain, and seem to originate in both depletion of executive resources and depletion of motivation. Clinical implications for diagnostics, psycho-education, and intervention are discussed.

Analysis of Space Shuttle Ground Support System Fault Detection, Isolation, and Recovery Processes and Resources

NASA Technical Reports Server (NTRS)

Gross, Anthony R.; Gerald-Yamasaki, Michael; Trent, Robert P.

2009-01-01

As part of the FDIR (Fault Detection, Isolation, and Recovery) Project for the Constellation Program, a task was designed within the context of the Constellation Program FDIR project called the Legacy Benchmarking Task to document as accurately as possible the FDIR processes and resources that were used by the Space Shuttle ground support equipment (GSE) during the Shuttle flight program. These results served as a comparison with results obtained from the new FDIR capability. The task team assessed Shuttle and EELV (Evolved Expendable Launch Vehicle) historical data for GSE-related launch delays to identify expected benefits and impact. This analysis included a study of complex fault isolation situations that required a lengthy troubleshooting process. Specifically, four elements of that system were considered: LH2 (liquid hydrogen), LO2 (liquid oxygen), hydraulic test, and ground special power.

ORCA Project: Research on high-performance parallel computer programming environments. Final report, 1 Apr-31 Mar 90

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snyder, L.; Notkin, D.; Adams, L.

1990-03-31

This task relates to research on programming massively parallel computers. Previous work on the Ensamble concept of programming was extended and investigation into nonshared memory models of parallel computation was undertaken. Previous work on the Ensamble concept defined a set of programming abstractions and was used to organize the programming task into three distinct levels; Composition of machine instruction, composition of processes, and composition of phases. It was applied to shared memory models of computations. During the present research period, these concepts were extended to nonshared memory models. During the present research period, one Ph D. thesis was completed, onemore » book chapter, and six conference proceedings were published.« less

Selenide isotope generator for the Galileo mission. Reliability program plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-10-01

The reliability program plan for the Selenide Isotope Generator (SIG) program is presented. It delineates the specific tasks that will be accomplished by Teledyne Energy Systems and its suppliers during design, development, fabrication and test of deliverable Radioisotopic Thermoelectric Generators (RTG), Electrical Heated Thermoelectric Generators (ETG) and associated Ground Support Equipment (GSE). The Plan is formulated in general accordance with procedures specified in DOE Reliability Engineering Program Requirements Publication No. SNS-2, dated June 17, 1974. The Reliability Program Plan presented herein defines the total reliability effort without further reference to Government Specifications. The reliability tasks to be accomplished are delineatedmore » herein and become the basis for contract compliance to the extent specified in the SIG contract Statement of Work.« less

Expectancy-value theory in persistence of learning effects in schizophrenia: role of task value and perceived competency.

PubMed

Choi, Jimmy; Fiszdon, Joanna M; Medalia, Alice

2010-09-01

Expectancy-value theory, a widely accepted model of motivation, posits that expectations of success on a learning task and the individual value placed on the task are central determinants of motivation to learn. This is supported by research in healthy controls suggesting that beliefs of self-and-content mastery can be so influential they can predict the degree of improvement on challenging cognitive tasks even more so than general cognitive ability. We examined components of expectancy-value theory (perceived competency and task value), along with baseline arithmetic performance and neuropsychological performance, as possible predictors of learning outcome in a sample of 70 outpatients with schizophrenia randomized to 1 of 2 different arithmetic learning conditions and followed up after 3 months. Results indicated that as with nonpsychiatric samples, perceived self-competency for the learning task was significantly related to perceptions of task value attributed to the learning task. Baseline expectations of success predicted persistence of learning on the task at 3-month follow-up, even after accounting for variance attributable to different arithmetic instruction, baseline arithmetic ability, attention, and self-reports of task interest and task value. We also found that expectation of success is a malleable construct, with posttraining improvements persisting at follow-up. These findings support the notion that expectancy-value theory is operative in schizophrenia. Thus, similar to the nonpsychiatric population, treatment benefits may be enhanced and better maintained if remediation programs also focus on perceptions of self-competency for the training tasks. Treatment issues related to instilling self-efficacy in cognitive recovery programs are discussed.